From 3d3522604a5557e80fdcab61c54bd04eaf15b525 Mon Sep 17 00:00:00 2001 From: Joachim Eastwood Date: Tue, 19 Feb 2013 22:44:57 +0100 Subject: spi/atmel: fix speed_hz check in atmel_spi_transfer() atmel_spi_transfer() would check speed_hz and fail if the speed was changed in the transfer. After commit "spi: make sure all transfer has proper speed set" this would happen on all transfers. Change speed_hz check to only fail if a lower speed than max is requested. Signed-off-by: Joachim Eastwood Acked-by: Nicolas Ferre Signed-off-by: Grant Likely diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 656d137..80f5867 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -847,8 +847,8 @@ static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg) } /* FIXME implement these protocol options!! */ - if (xfer->speed_hz) { - dev_dbg(&spi->dev, "no protocol options yet\n"); + if (xfer->speed_hz < spi->max_speed_hz) { + dev_dbg(&spi->dev, "can't change speed in transfer\n"); return -ENOPROTOOPT; } -- cgit v0.10.2 From 446411e18b2cb17d153e45f634a3c9a79ada3ac2 Mon Sep 17 00:00:00 2001 From: Andreas Larsson Date: Wed, 13 Feb 2013 14:20:25 +0100 Subject: spi: Initialize cs_gpio and cs_gpios with -ENOENT The return value from of_get_named_gpio is -ENOENT when the given index matches a hole in the "cs-gpios" property phandle list. However, the default value of cs_gpio in struct spi_device and entries of cs_gpios in struct spi_master is -EINVAL, which is documented to indicate that a GPIO line should not be used for the given spi_device. This sets the default value of cs_gpio in struct spi_device and entries of cs_gpios in struct spi_master to -ENOENT. Thus, -ENOENT is the only value used to indicate that no GPIO line should be used. Signed-off-by: Andreas Larsson Signed-off-by: Grant Likely diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 004b10f..bcca66c 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -334,7 +334,7 @@ struct spi_device *spi_alloc_device(struct spi_master *master) spi->dev.parent = &master->dev; spi->dev.bus = &spi_bus_type; spi->dev.release = spidev_release; - spi->cs_gpio = -EINVAL; + spi->cs_gpio = -ENOENT; device_initialize(&spi->dev); return spi; } @@ -1079,7 +1079,7 @@ static int of_spi_register_master(struct spi_master *master) return -ENOMEM; for (i = 0; i < master->num_chipselect; i++) - cs[i] = -EINVAL; + cs[i] = -ENOENT; for (i = 0; i < nb; i++) cs[i] = of_get_named_gpio(np, "cs-gpios", i); diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 38c2b92..c395f32 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -57,7 +57,7 @@ extern struct bus_type spi_bus_type; * @modalias: Name of the driver to use with this device, or an alias * for that name. This appears in the sysfs "modalias" attribute * for driver coldplugging, and in uevents used for hotplugging - * @cs_gpio: gpio number of the chipselect line (optional, -EINVAL when + * @cs_gpio: gpio number of the chipselect line (optional, -ENOENT when * when not using a GPIO line) * * A @spi_device is used to interchange data between an SPI slave @@ -261,7 +261,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * queue so the subsystem notifies the driver that it may relax the * hardware by issuing this call * @cs_gpios: Array of GPIOs to use as chip select lines; one per CS - * number. Any individual value may be -EINVAL for CS lines that + * number. Any individual value may be -ENOENT for CS lines that * are not GPIOs (driven by the SPI controller itself). * * Each SPI master controller can communicate with one or more @spi_device -- cgit v0.10.2 From 8ec5d84ef51cc64ed02bb9bf0e43a652178252c1 Mon Sep 17 00:00:00 2001 From: Andreas Larsson Date: Wed, 13 Feb 2013 14:23:24 +0100 Subject: spi: Return error from of_spi_register_master on bad "cs-gpios" property This makes sure that an error is returned on an incorrectly formed "cs-gpios" property, but reports success when the "cs-gpios" property is well formed or missing. When holes in the cs-gpios property phandle list is used to indicate that some other form of chipselect is to be used it is important that failure to read a broken "cs-gpios" property does not silently fail leading to the spi controller to use an unintended chipselect. Signed-off-by: Andreas Larsson Signed-off-by: Grant Likely diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index bcca66c..3738e7c 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -1067,8 +1067,11 @@ static int of_spi_register_master(struct spi_master *master) nb = of_gpio_named_count(np, "cs-gpios"); master->num_chipselect = max(nb, (int)master->num_chipselect); - if (nb < 1) + /* Return error only for an incorrectly formed cs-gpios property */ + if (nb == 0 || nb == -ENOENT) return 0; + else if (nb < 0) + return nb; cs = devm_kzalloc(&master->dev, sizeof(int) * master->num_chipselect, -- cgit v0.10.2 From 0d2d0cc5216db678070efc911ef47f4cb53b4aad Mon Sep 17 00:00:00 2001 From: "Manjunathappa, Prakash" Date: Mon, 25 Feb 2013 16:14:07 +0530 Subject: spi/davinci: fix module build error Fix below module build error: CC [M] drivers/spi/spi-davinci.o drivers/spi/spi-davinci.c:774:1: error: '__mod_of_device_table' aliased to undefined symbol 'davini_spi_of_match' drivers/spi/spi-davinci.c:774:1: error: '__mod_of_device_table' aliased to undefined symbol 'davini_spi_of_match' make[2]: *** [drivers/spi/spi-davinci.o] Error 1 make[1]: *** [drivers/spi] Error 2 make[1]: *** Waiting for unfinished jobs.... make: *** [drivers] Error 2 Signed-off-by: Manjunathappa, Prakash Acked-by: Sekhar Nori Signed-off-by: Grant Likely diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c index 8234d22..6287c83 100644 --- a/drivers/spi/spi-davinci.c +++ b/drivers/spi/spi-davinci.c @@ -784,7 +784,7 @@ static const struct of_device_id davinci_spi_of_match[] = { }, { }, }; -MODULE_DEVICE_TABLE(of, davini_spi_of_match); +MODULE_DEVICE_TABLE(of, davinci_spi_of_match); /** * spi_davinci_get_pdata - Get platform data from DTS binding -- cgit v0.10.2 From d450f445f9a654080a6be4094376c2192d9a1f36 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 19 Feb 2013 02:58:25 +0300 Subject: : fix compilation warnings with DT disabled MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the following compilation warnings (in Simon Horman's renesas.git repo): In file included from arch/arm/mach-shmobile/setup-r8a7779.c:24:0: include/linux/of_platform.h:107:13: warning: ‘struct of_device_id’ declared inside parameter list [enabled by default] include/linux/of_platform.h:107:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] include/linux/of_platform.h:107:13: warning: ‘struct device_node’ declared inside parameter list [enabled by default] only #include's headers with definitions of the above mentioned structures if CONFIG_OF_DEVICE=y but uses them even if not. One solution is to move some #include's out of #ifdef CONFIG_OF_DEVICE and use incomplete declarations for the rest of the structures where the #ifdef move doesn't help... Reported-by: Vladimir Barinov Signed-off-by: Sergei Shtylyov Signed-off-by: Rob Herring diff --git a/include/linux/of_platform.h b/include/linux/of_platform.h index 3863a4d..2a93b64 100644 --- a/include/linux/of_platform.h +++ b/include/linux/of_platform.h @@ -11,9 +11,10 @@ * */ -#ifdef CONFIG_OF_DEVICE #include #include + +#ifdef CONFIG_OF_DEVICE #include #include #include @@ -100,7 +101,7 @@ extern int of_platform_populate(struct device_node *root, #if !defined(CONFIG_OF_ADDRESS) struct of_dev_auxdata; -struct device; +struct device_node; static inline int of_platform_populate(struct device_node *root, const struct of_device_id *matches, const struct of_dev_auxdata *lookup, -- cgit v0.10.2 From 48d045dbe9c757681edfe8274211254c56d53a41 Mon Sep 17 00:00:00 2001 From: Rahul Sharma Date: Wed, 6 Feb 2013 09:51:39 -0500 Subject: of/documentation: move video device bindings to a common place Binding Documents for drm-devices are placed in Documentation/devicetree/bindings/drm/*. But these devices are common for v4l framework, hence moved to a common place at Documentation/devicetree/bindings/video/. 'exynos_' prefix is added to associate them with exynos soc series. Signed-off-by: Rahul Sharma Signed-off-by: Grant Likely diff --git a/Documentation/devicetree/bindings/drm/exynos/hdmi.txt b/Documentation/devicetree/bindings/drm/exynos/hdmi.txt deleted file mode 100644 index 589edee..0000000 --- a/Documentation/devicetree/bindings/drm/exynos/hdmi.txt +++ /dev/null @@ -1,22 +0,0 @@ -Device-Tree bindings for drm hdmi driver - -Required properties: -- compatible: value should be "samsung,exynos5-hdmi". -- reg: physical base address of the hdmi and length of memory mapped - region. -- interrupts: interrupt number to the cpu. -- hpd-gpio: following information about the hotplug gpio pin. - a) phandle of the gpio controller node. - b) pin number within the gpio controller. - c) pin function mode. - d) optional flags and pull up/down. - e) drive strength. - -Example: - - hdmi { - compatible = "samsung,exynos5-hdmi"; - reg = <0x14530000 0x100000>; - interrupts = <0 95 0>; - hpd-gpio = <&gpx3 7 0xf 1 3>; - }; diff --git a/Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt b/Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt deleted file mode 100644 index fa166d9..0000000 --- a/Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt +++ /dev/null @@ -1,12 +0,0 @@ -Device-Tree bindings for hdmiddc driver - -Required properties: -- compatible: value should be "samsung,exynos5-hdmiddc". -- reg: I2C address of the hdmiddc device. - -Example: - - hdmiddc { - compatible = "samsung,exynos5-hdmiddc"; - reg = <0x50>; - }; diff --git a/Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt b/Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt deleted file mode 100644 index 858f4f9..0000000 --- a/Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt +++ /dev/null @@ -1,12 +0,0 @@ -Device-Tree bindings for hdmiphy driver - -Required properties: -- compatible: value should be "samsung,exynos5-hdmiphy". -- reg: I2C address of the hdmiphy device. - -Example: - - hdmiphy { - compatible = "samsung,exynos5-hdmiphy"; - reg = <0x38>; - }; diff --git a/Documentation/devicetree/bindings/drm/exynos/mixer.txt b/Documentation/devicetree/bindings/drm/exynos/mixer.txt deleted file mode 100644 index 9b2ea03..0000000 --- a/Documentation/devicetree/bindings/drm/exynos/mixer.txt +++ /dev/null @@ -1,15 +0,0 @@ -Device-Tree bindings for mixer driver - -Required properties: -- compatible: value should be "samsung,exynos5-mixer". -- reg: physical base address of the mixer and length of memory mapped - region. -- interrupts: interrupt number to the cpu. - -Example: - - mixer { - compatible = "samsung,exynos5-mixer"; - reg = <0x14450000 0x10000>; - interrupts = <0 94 0>; - }; diff --git a/Documentation/devicetree/bindings/video/exynos_hdmi.txt b/Documentation/devicetree/bindings/video/exynos_hdmi.txt new file mode 100644 index 0000000..589edee --- /dev/null +++ b/Documentation/devicetree/bindings/video/exynos_hdmi.txt @@ -0,0 +1,22 @@ +Device-Tree bindings for drm hdmi driver + +Required properties: +- compatible: value should be "samsung,exynos5-hdmi". +- reg: physical base address of the hdmi and length of memory mapped + region. +- interrupts: interrupt number to the cpu. +- hpd-gpio: following information about the hotplug gpio pin. + a) phandle of the gpio controller node. + b) pin number within the gpio controller. + c) pin function mode. + d) optional flags and pull up/down. + e) drive strength. + +Example: + + hdmi { + compatible = "samsung,exynos5-hdmi"; + reg = <0x14530000 0x100000>; + interrupts = <0 95 0>; + hpd-gpio = <&gpx3 7 0xf 1 3>; + }; diff --git a/Documentation/devicetree/bindings/video/exynos_hdmiddc.txt b/Documentation/devicetree/bindings/video/exynos_hdmiddc.txt new file mode 100644 index 0000000..fa166d9 --- /dev/null +++ b/Documentation/devicetree/bindings/video/exynos_hdmiddc.txt @@ -0,0 +1,12 @@ +Device-Tree bindings for hdmiddc driver + +Required properties: +- compatible: value should be "samsung,exynos5-hdmiddc". +- reg: I2C address of the hdmiddc device. + +Example: + + hdmiddc { + compatible = "samsung,exynos5-hdmiddc"; + reg = <0x50>; + }; diff --git a/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt b/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt new file mode 100644 index 0000000..858f4f9 --- /dev/null +++ b/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt @@ -0,0 +1,12 @@ +Device-Tree bindings for hdmiphy driver + +Required properties: +- compatible: value should be "samsung,exynos5-hdmiphy". +- reg: I2C address of the hdmiphy device. + +Example: + + hdmiphy { + compatible = "samsung,exynos5-hdmiphy"; + reg = <0x38>; + }; diff --git a/Documentation/devicetree/bindings/video/exynos_mixer.txt b/Documentation/devicetree/bindings/video/exynos_mixer.txt new file mode 100644 index 0000000..9b2ea03 --- /dev/null +++ b/Documentation/devicetree/bindings/video/exynos_mixer.txt @@ -0,0 +1,15 @@ +Device-Tree bindings for mixer driver + +Required properties: +- compatible: value should be "samsung,exynos5-mixer". +- reg: physical base address of the mixer and length of memory mapped + region. +- interrupts: interrupt number to the cpu. + +Example: + + mixer { + compatible = "samsung,exynos5-mixer"; + reg = <0x14450000 0x10000>; + interrupts = <0 94 0>; + }; -- cgit v0.10.2 From b855f16b05a697ac1863adabe99bfba56e6d3199 Mon Sep 17 00:00:00 2001 From: Tang Yuantian Date: Wed, 10 Apr 2013 11:36:39 +0800 Subject: of/base: release the node correctly in of_parse_phandle_with_args() Call of_node_put() only when the out_args is NULL on success, or the node's reference count will not be correct because the caller will call of_node_put() again. Signed-off-by: Tang Yuantian [grant.likely: tightened up the patch] Signed-off-by: Grant Likely diff --git a/drivers/of/base.c b/drivers/of/base.c index 321d3ef..e77e719 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -1166,11 +1166,11 @@ static int __of_parse_phandle_with_args(const struct device_node *np, out_args->args_count = count; for (i = 0; i < count; i++) out_args->args[i] = be32_to_cpup(list++); + } else { + of_node_put(node); } /* Found it! return success */ - if (node) - of_node_put(node); return 0; } -- cgit v0.10.2 From a2b9ea73967386ec5e524ab206bd549d5aafea17 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 25 Apr 2013 14:27:57 +0200 Subject: Documentation/devicetree: make semantic of initrd-end more explicit MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König Signed-off-by: Rob Herring diff --git a/Documentation/devicetree/usage-model.txt b/Documentation/devicetree/usage-model.txt index ef9d06c..0efedaa 100644 --- a/Documentation/devicetree/usage-model.txt +++ b/Documentation/devicetree/usage-model.txt @@ -191,9 +191,11 @@ Linux it will look something like this: }; The bootargs property contains the kernel arguments, and the initrd-* -properties define the address and size of an initrd blob. The -chosen node may also optionally contain an arbitrary number of -additional properties for platform-specific configuration data. +properties define the address and size of an initrd blob. Note that +initrd-end is the first address after the initrd image, so this doesn't +match the usual semantic of struct resource. The chosen node may also +optionally contain an arbitrary number of additional properties for +platform-specific configuration data. During early boot, the architecture setup code calls of_scan_flat_dt() several times with different helper callbacks to parse device tree -- cgit v0.10.2 From 49717cb40410fe4b563968680ff7c513967504c6 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Thu, 11 Apr 2013 08:07:11 -0700 Subject: kthread: Document ways of reducing OS jitter due to per-CPU kthreads The Linux kernel uses a number of per-CPU kthreads, any of which might contribute to OS jitter at any time. The usual approach to normal kthreads, namely to bind them to a "housekeeping" CPU, does not work with these kthreads because they cannot operate correctly if moved to some other CPU. This commit therefore lists ways of controlling OS jitter from the Linux kernel's per-CPU kthreads. It also lists some ways of diagnosing excessive jitter. Signed-off-by: Paul E. McKenney Cc: Frederic Weisbecker Cc: Steven Rostedt Cc: Borislav Petkov Cc: Arjan van de Ven Cc: Kevin Hilman Cc: Christoph Lameter Cc: Thomas Gleixner Cc: Olivier Baetz Cc: Pradeep Satyanarayana Reviewed-by: Randy Dunlap Reviewed-by: Borislav Petkov diff --git a/Documentation/kernel-per-CPU-kthreads.txt b/Documentation/kernel-per-CPU-kthreads.txt new file mode 100644 index 0000000..cbf7ae4 --- /dev/null +++ b/Documentation/kernel-per-CPU-kthreads.txt @@ -0,0 +1,202 @@ +REDUCING OS JITTER DUE TO PER-CPU KTHREADS + +This document lists per-CPU kthreads in the Linux kernel and presents +options to control their OS jitter. Note that non-per-CPU kthreads are +not listed here. To reduce OS jitter from non-per-CPU kthreads, bind +them to a "housekeeping" CPU dedicated to such work. + + +REFERENCES + +o Documentation/IRQ-affinity.txt: Binding interrupts to sets of CPUs. + +o Documentation/cgroups: Using cgroups to bind tasks to sets of CPUs. + +o man taskset: Using the taskset command to bind tasks to sets + of CPUs. + +o man sched_setaffinity: Using the sched_setaffinity() system + call to bind tasks to sets of CPUs. + +o /sys/devices/system/cpu/cpuN/online: Control CPU N's hotplug state, + writing "0" to offline and "1" to online. + +o In order to locate kernel-generated OS jitter on CPU N: + + cd /sys/kernel/debug/tracing + echo 1 > max_graph_depth # Increase the "1" for more detail + echo function_graph > current_tracer + # run workload + cat per_cpu/cpuN/trace + + +KTHREADS + +Name: ehca_comp/%u +Purpose: Periodically process Infiniband-related work. +To reduce its OS jitter, do any of the following: +1. Don't use eHCA Infiniband hardware, instead choosing hardware + that does not require per-CPU kthreads. This will prevent these + kthreads from being created in the first place. (This will + work for most people, as this hardware, though important, is + relatively old and is produced in relatively low unit volumes.) +2. Do all eHCA-Infiniband-related work on other CPUs, including + interrupts. +3. Rework the eHCA driver so that its per-CPU kthreads are + provisioned only on selected CPUs. + + +Name: irq/%d-%s +Purpose: Handle threaded interrupts. +To reduce its OS jitter, do the following: +1. Use irq affinity to force the irq threads to execute on + some other CPU. + +Name: kcmtpd_ctr_%d +Purpose: Handle Bluetooth work. +To reduce its OS jitter, do one of the following: +1. Don't use Bluetooth, in which case these kthreads won't be + created in the first place. +2. Use irq affinity to force Bluetooth-related interrupts to + occur on some other CPU and furthermore initiate all + Bluetooth activity on some other CPU. + +Name: ksoftirqd/%u +Purpose: Execute softirq handlers when threaded or when under heavy load. +To reduce its OS jitter, each softirq vector must be handled +separately as follows: +TIMER_SOFTIRQ: Do all of the following: +1. To the extent possible, keep the CPU out of the kernel when it + is non-idle, for example, by avoiding system calls and by forcing + both kernel threads and interrupts to execute elsewhere. +2. Build with CONFIG_HOTPLUG_CPU=y. After boot completes, force + the CPU offline, then bring it back online. This forces + recurring timers to migrate elsewhere. If you are concerned + with multiple CPUs, force them all offline before bringing the + first one back online. Once you have onlined the CPUs in question, + do not offline any other CPUs, because doing so could force the + timer back onto one of the CPUs in question. +NET_TX_SOFTIRQ and NET_RX_SOFTIRQ: Do all of the following: +1. Force networking interrupts onto other CPUs. +2. Initiate any network I/O on other CPUs. +3. Once your application has started, prevent CPU-hotplug operations + from being initiated from tasks that might run on the CPU to + be de-jittered. (It is OK to force this CPU offline and then + bring it back online before you start your application.) +BLOCK_SOFTIRQ: Do all of the following: +1. Force block-device interrupts onto some other CPU. +2. Initiate any block I/O on other CPUs. +3. Once your application has started, prevent CPU-hotplug operations + from being initiated from tasks that might run on the CPU to + be de-jittered. (It is OK to force this CPU offline and then + bring it back online before you start your application.) +BLOCK_IOPOLL_SOFTIRQ: Do all of the following: +1. Force block-device interrupts onto some other CPU. +2. Initiate any block I/O and block-I/O polling on other CPUs. +3. Once your application has started, prevent CPU-hotplug operations + from being initiated from tasks that might run on the CPU to + be de-jittered. (It is OK to force this CPU offline and then + bring it back online before you start your application.) +TASKLET_SOFTIRQ: Do one or more of the following: +1. Avoid use of drivers that use tasklets. (Such drivers will contain + calls to things like tasklet_schedule().) +2. Convert all drivers that you must use from tasklets to workqueues. +3. Force interrupts for drivers using tasklets onto other CPUs, + and also do I/O involving these drivers on other CPUs. +SCHED_SOFTIRQ: Do all of the following: +1. Avoid sending scheduler IPIs to the CPU to be de-jittered, + for example, ensure that at most one runnable kthread is present + on that CPU. If a thread that expects to run on the de-jittered + CPU awakens, the scheduler will send an IPI that can result in + a subsequent SCHED_SOFTIRQ. +2. Build with CONFIG_RCU_NOCB_CPU=y, CONFIG_RCU_NOCB_CPU_ALL=y, + CONFIG_NO_HZ_FULL=y, and, in addition, ensure that the CPU + to be de-jittered is marked as an adaptive-ticks CPU using the + "nohz_full=" boot parameter. This reduces the number of + scheduler-clock interrupts that the de-jittered CPU receives, + minimizing its chances of being selected to do the load balancing + work that runs in SCHED_SOFTIRQ context. +3. To the extent possible, keep the CPU out of the kernel when it + is non-idle, for example, by avoiding system calls and by + forcing both kernel threads and interrupts to execute elsewhere. + This further reduces the number of scheduler-clock interrupts + received by the de-jittered CPU. +HRTIMER_SOFTIRQ: Do all of the following: +1. To the extent possible, keep the CPU out of the kernel when it + is non-idle. For example, avoid system calls and force both + kernel threads and interrupts to execute elsewhere. +2. Build with CONFIG_HOTPLUG_CPU=y. Once boot completes, force the + CPU offline, then bring it back online. This forces recurring + timers to migrate elsewhere. If you are concerned with multiple + CPUs, force them all offline before bringing the first one + back online. Once you have onlined the CPUs in question, do not + offline any other CPUs, because doing so could force the timer + back onto one of the CPUs in question. +RCU_SOFTIRQ: Do at least one of the following: +1. Offload callbacks and keep the CPU in either dyntick-idle or + adaptive-ticks state by doing all of the following: + a. Build with CONFIG_RCU_NOCB_CPU=y, CONFIG_RCU_NOCB_CPU_ALL=y, + CONFIG_NO_HZ_FULL=y, and, in addition ensure that the CPU + to be de-jittered is marked as an adaptive-ticks CPU using + the "nohz_full=" boot parameter. Bind the rcuo kthreads + to housekeeping CPUs, which can tolerate OS jitter. + b. To the extent possible, keep the CPU out of the kernel + when it is non-idle, for example, by avoiding system + calls and by forcing both kernel threads and interrupts + to execute elsewhere. +2. Enable RCU to do its processing remotely via dyntick-idle by + doing all of the following: + a. Build with CONFIG_NO_HZ=y and CONFIG_RCU_FAST_NO_HZ=y. + b. Ensure that the CPU goes idle frequently, allowing other + CPUs to detect that it has passed through an RCU quiescent + state. If the kernel is built with CONFIG_NO_HZ_FULL=y, + userspace execution also allows other CPUs to detect that + the CPU in question has passed through a quiescent state. + c. To the extent possible, keep the CPU out of the kernel + when it is non-idle, for example, by avoiding system + calls and by forcing both kernel threads and interrupts + to execute elsewhere. + +Name: rcuc/%u +Purpose: Execute RCU callbacks in CONFIG_RCU_BOOST=y kernels. +To reduce its OS jitter, do at least one of the following: +1. Build the kernel with CONFIG_PREEMPT=n. This prevents these + kthreads from being created in the first place, and also obviates + the need for RCU priority boosting. This approach is feasible + for workloads that do not require high degrees of responsiveness. +2. Build the kernel with CONFIG_RCU_BOOST=n. This prevents these + kthreads from being created in the first place. This approach + is feasible only if your workload never requires RCU priority + boosting, for example, if you ensure frequent idle time on all + CPUs that might execute within the kernel. +3. Build with CONFIG_RCU_NOCB_CPU=y and CONFIG_RCU_NOCB_CPU_ALL=y, + which offloads all RCU callbacks to kthreads that can be moved + off of CPUs susceptible to OS jitter. This approach prevents the + rcuc/%u kthreads from having any work to do, so that they are + never awakened. +4. Ensure that the CPU never enters the kernel, and, in particular, + avoid initiating any CPU hotplug operations on this CPU. This is + another way of preventing any callbacks from being queued on the + CPU, again preventing the rcuc/%u kthreads from having any work + to do. + +Name: rcuob/%d, rcuop/%d, and rcuos/%d +Purpose: Offload RCU callbacks from the corresponding CPU. +To reduce its OS jitter, do at least one of the following: +1. Use affinity, cgroups, or other mechanism to force these kthreads + to execute on some other CPU. +2. Build with CONFIG_RCU_NOCB_CPUS=n, which will prevent these + kthreads from being created in the first place. However, please + note that this will not eliminate OS jitter, but will instead + shift it to RCU_SOFTIRQ. + +Name: watchdog/%u +Purpose: Detect software lockups on each CPU. +To reduce its OS jitter, do at least one of the following: +1. Build with CONFIG_LOCKUP_DETECTOR=n, which will prevent these + kthreads from being created in the first place. +2. Echo a zero to /proc/sys/kernel/watchdog to disable the + watchdog timer. +3. Echo a large number of /proc/sys/kernel/watchdog_thresh in + order to reduce the frequency of OS jitter due to the watchdog + timer down to a level that is acceptable for your workload. -- cgit v0.10.2 From 4f42f4ef0dba0cf837b628ac33231a7acb8fcc9d Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 26 Apr 2013 16:22:46 +0300 Subject: drm/i915: Always normalize return timeout for wait_timeout_ioctl MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As we recompute the remaining timeout after waiting, there is a potential for that timeout to be less than zero and so need sanitizing. The timeout is always returned to userspace and validated, so we should always perform the sanitation. v2 [vsyrjala]: Only normalize the timespec if it's invalid v3: Add a comment to clarify the situation and remove the now useless WARN_ON() (ickle) Cc: Ben Widawsky Signed-off-by: Chris Wilson Signed-off-by: Ville Syrjälä Tested-by: Ben Widawsky Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 6be940e..6165535 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1045,6 +1045,8 @@ static int __wait_seqno(struct intel_ring_buffer *ring, u32 seqno, if (timeout) { struct timespec sleep_time = timespec_sub(now, before); *timeout = timespec_sub(*timeout, sleep_time); + if (!timespec_valid(timeout)) /* i.e. negative time remains */ + set_normalized_timespec(timeout, 0, 0); } switch (end) { @@ -1053,8 +1055,6 @@ static int __wait_seqno(struct intel_ring_buffer *ring, u32 seqno, case -ERESTARTSYS: /* Signal */ return (int)end; case 0: /* Timeout */ - if (timeout) - set_normalized_timespec(timeout, 0, 0); return -ETIME; default: /* Completed */ WARN_ON(end < 0); /* We're not aware of other errors */ @@ -2377,10 +2377,8 @@ i915_gem_wait_ioctl(struct drm_device *dev, void *data, struct drm_file *file) mutex_unlock(&dev->struct_mutex); ret = __wait_seqno(ring, seqno, reset_counter, true, timeout); - if (timeout) { - WARN_ON(!timespec_valid(timeout)); + if (timeout) args->timeout_ns = timespec_to_ns(timeout); - } return ret; out: -- cgit v0.10.2 From 3a359f0b21ab218c1bf7a6a1b638b6fd143d0b99 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sat, 20 Apr 2013 12:08:11 +0200 Subject: drm/mm: fix dump table BUG In commit 9e8944ab564f2e3dde90a518cd32048c58918608 Author: Chris Wilson Date: Thu Nov 15 11:32:17 2012 +0000 drm: Introduce an iterator over holes in the drm_mm range manager helpers and iterators for hole handling have been introduced with some debug BUG_ONs sprinkled over. Unfortunately this broke the mm dumper which unconditionally tried to compute the size of the very first hole. While at it unify the code a bit with the hole dumping in the loop. v2: Extract a hole dump helper. Reported-by: Christopher Harvey Cc: Christopher Harvey Cc: Dave Airlie Cc: Chris Wilson Cc: stable@vger.kernel.org Acked-by: Dave Airlie Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c index db1e2d6..07cf99c 100644 --- a/drivers/gpu/drm/drm_mm.c +++ b/drivers/gpu/drm/drm_mm.c @@ -755,33 +755,35 @@ void drm_mm_debug_table(struct drm_mm *mm, const char *prefix) EXPORT_SYMBOL(drm_mm_debug_table); #if defined(CONFIG_DEBUG_FS) -int drm_mm_dump_table(struct seq_file *m, struct drm_mm *mm) +static unsigned long drm_mm_dump_hole(struct seq_file *m, struct drm_mm_node *entry) { - struct drm_mm_node *entry; - unsigned long total_used = 0, total_free = 0, total = 0; unsigned long hole_start, hole_end, hole_size; - hole_start = drm_mm_hole_node_start(&mm->head_node); - hole_end = drm_mm_hole_node_end(&mm->head_node); - hole_size = hole_end - hole_start; - if (hole_size) + if (entry->hole_follows) { + hole_start = drm_mm_hole_node_start(entry); + hole_end = drm_mm_hole_node_end(entry); + hole_size = hole_end - hole_start; seq_printf(m, "0x%08lx-0x%08lx: 0x%08lx: free\n", hole_start, hole_end, hole_size); - total_free += hole_size; + return hole_size; + } + + return 0; +} + +int drm_mm_dump_table(struct seq_file *m, struct drm_mm *mm) +{ + struct drm_mm_node *entry; + unsigned long total_used = 0, total_free = 0, total = 0; + + total_free += drm_mm_dump_hole(m, &mm->head_node); drm_mm_for_each_node(entry, mm) { seq_printf(m, "0x%08lx-0x%08lx: 0x%08lx: used\n", entry->start, entry->start + entry->size, entry->size); total_used += entry->size; - if (entry->hole_follows) { - hole_start = drm_mm_hole_node_start(entry); - hole_end = drm_mm_hole_node_end(entry); - hole_size = hole_end - hole_start; - seq_printf(m, "0x%08lx-0x%08lx: 0x%08lx: free\n", - hole_start, hole_end, hole_size); - total_free += hole_size; - } + total_free += drm_mm_dump_hole(m, entry); } total = total_free + total_used; -- cgit v0.10.2 From 51cea1f469ad473c8d8b7d4a227640b8c02bf167 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Thu, 21 Mar 2013 13:10:44 +0200 Subject: drm/i915: Fix pipe enabled mask for pipe C in WM calculations MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the incorrect enabled pipes mask for pipe C in the WM calculations. Additionally, in an effort to make the code easier to understand, populate the mask with 1 << PIPE_[ABC] instead of raw numbers. v2: Use 1 << PIPE_[ABC] (ickle/danvet) v3: Pass PIPE_[ABC] to g4x_compute_wm0() (ickle) Signed-off-by: Ville Syrjälä Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index de3b0dc..aa01128 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -1301,17 +1301,17 @@ static void valleyview_update_wm(struct drm_device *dev) vlv_update_drain_latency(dev); - if (g4x_compute_wm0(dev, 0, + if (g4x_compute_wm0(dev, PIPE_A, &valleyview_wm_info, latency_ns, &valleyview_cursor_wm_info, latency_ns, &planea_wm, &cursora_wm)) - enabled |= 1; + enabled |= 1 << PIPE_A; - if (g4x_compute_wm0(dev, 1, + if (g4x_compute_wm0(dev, PIPE_B, &valleyview_wm_info, latency_ns, &valleyview_cursor_wm_info, latency_ns, &planeb_wm, &cursorb_wm)) - enabled |= 2; + enabled |= 1 << PIPE_B; if (single_plane_enabled(enabled) && g4x_compute_srwm(dev, ffs(enabled) - 1, @@ -1357,17 +1357,17 @@ static void g4x_update_wm(struct drm_device *dev) int plane_sr, cursor_sr; unsigned int enabled = 0; - if (g4x_compute_wm0(dev, 0, + if (g4x_compute_wm0(dev, PIPE_A, &g4x_wm_info, latency_ns, &g4x_cursor_wm_info, latency_ns, &planea_wm, &cursora_wm)) - enabled |= 1; + enabled |= 1 << PIPE_A; - if (g4x_compute_wm0(dev, 1, + if (g4x_compute_wm0(dev, PIPE_B, &g4x_wm_info, latency_ns, &g4x_cursor_wm_info, latency_ns, &planeb_wm, &cursorb_wm)) - enabled |= 2; + enabled |= 1 << PIPE_B; if (single_plane_enabled(enabled) && g4x_compute_srwm(dev, ffs(enabled) - 1, @@ -1716,7 +1716,7 @@ static void ironlake_update_wm(struct drm_device *dev) unsigned int enabled; enabled = 0; - if (g4x_compute_wm0(dev, 0, + if (g4x_compute_wm0(dev, PIPE_A, &ironlake_display_wm_info, ILK_LP0_PLANE_LATENCY, &ironlake_cursor_wm_info, @@ -1727,10 +1727,10 @@ static void ironlake_update_wm(struct drm_device *dev) DRM_DEBUG_KMS("FIFO watermarks For pipe A -" " plane %d, " "cursor: %d\n", plane_wm, cursor_wm); - enabled |= 1; + enabled |= 1 << PIPE_A; } - if (g4x_compute_wm0(dev, 1, + if (g4x_compute_wm0(dev, PIPE_B, &ironlake_display_wm_info, ILK_LP0_PLANE_LATENCY, &ironlake_cursor_wm_info, @@ -1741,7 +1741,7 @@ static void ironlake_update_wm(struct drm_device *dev) DRM_DEBUG_KMS("FIFO watermarks For pipe B -" " plane %d, cursor: %d\n", plane_wm, cursor_wm); - enabled |= 2; + enabled |= 1 << PIPE_B; } /* @@ -1801,7 +1801,7 @@ static void sandybridge_update_wm(struct drm_device *dev) unsigned int enabled; enabled = 0; - if (g4x_compute_wm0(dev, 0, + if (g4x_compute_wm0(dev, PIPE_A, &sandybridge_display_wm_info, latency, &sandybridge_cursor_wm_info, latency, &plane_wm, &cursor_wm)) { @@ -1812,10 +1812,10 @@ static void sandybridge_update_wm(struct drm_device *dev) DRM_DEBUG_KMS("FIFO watermarks For pipe A -" " plane %d, " "cursor: %d\n", plane_wm, cursor_wm); - enabled |= 1; + enabled |= 1 << PIPE_A; } - if (g4x_compute_wm0(dev, 1, + if (g4x_compute_wm0(dev, PIPE_B, &sandybridge_display_wm_info, latency, &sandybridge_cursor_wm_info, latency, &plane_wm, &cursor_wm)) { @@ -1826,7 +1826,7 @@ static void sandybridge_update_wm(struct drm_device *dev) DRM_DEBUG_KMS("FIFO watermarks For pipe B -" " plane %d, cursor: %d\n", plane_wm, cursor_wm); - enabled |= 2; + enabled |= 1 << PIPE_B; } /* @@ -1904,7 +1904,7 @@ static void ivybridge_update_wm(struct drm_device *dev) unsigned int enabled; enabled = 0; - if (g4x_compute_wm0(dev, 0, + if (g4x_compute_wm0(dev, PIPE_A, &sandybridge_display_wm_info, latency, &sandybridge_cursor_wm_info, latency, &plane_wm, &cursor_wm)) { @@ -1915,10 +1915,10 @@ static void ivybridge_update_wm(struct drm_device *dev) DRM_DEBUG_KMS("FIFO watermarks For pipe A -" " plane %d, " "cursor: %d\n", plane_wm, cursor_wm); - enabled |= 1; + enabled |= 1 << PIPE_A; } - if (g4x_compute_wm0(dev, 1, + if (g4x_compute_wm0(dev, PIPE_B, &sandybridge_display_wm_info, latency, &sandybridge_cursor_wm_info, latency, &plane_wm, &cursor_wm)) { @@ -1929,10 +1929,10 @@ static void ivybridge_update_wm(struct drm_device *dev) DRM_DEBUG_KMS("FIFO watermarks For pipe B -" " plane %d, cursor: %d\n", plane_wm, cursor_wm); - enabled |= 2; + enabled |= 1 << PIPE_B; } - if (g4x_compute_wm0(dev, 2, + if (g4x_compute_wm0(dev, PIPE_C, &sandybridge_display_wm_info, latency, &sandybridge_cursor_wm_info, latency, &plane_wm, &cursor_wm)) { @@ -1943,7 +1943,7 @@ static void ivybridge_update_wm(struct drm_device *dev) DRM_DEBUG_KMS("FIFO watermarks For pipe C -" " plane %d, cursor: %d\n", plane_wm, cursor_wm); - enabled |= 3; + enabled |= 1 << PIPE_C; } /* -- cgit v0.10.2 From b358c6cf029cb67b3ed9cc367fb46f1fa3228c5b Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 30 Apr 2013 10:44:51 +0300 Subject: fbdev/ps3fb: fix compile warning Commit 11bd5933abe0 ("fbdev/ps3fb: use vm_iomap_memory()") introduced the following warning: drivers/video/ps3fb.c: In function 'ps3fb_mmap': drivers/video/ps3fb.c:712:2: warning: suggest parentheses around '+' inside '<<' [-Wparentheses] Fix this by adding the parentheses. Signed-off-by: Tomi Valkeinen diff --git a/drivers/video/ps3fb.c b/drivers/video/ps3fb.c index d9f08c6..dbfe2c1 100644 --- a/drivers/video/ps3fb.c +++ b/drivers/video/ps3fb.c @@ -710,7 +710,7 @@ static int ps3fb_mmap(struct fb_info *info, struct vm_area_struct *vma) r = vm_iomap_memory(vma, info->fix.smem_start, info->fix.smem_len); dev_dbg(info->device, "ps3fb: mmap framebuffer P(%lx)->V(%lx)\n", - info->fix.smem_start + vma->vm_pgoff << PAGE_SHIFT, + info->fix.smem_start + (vma->vm_pgoff << PAGE_SHIFT), vma->vm_start); return r; -- cgit v0.10.2 From f557c98b168a2860bfc7dedf4b4e3bafb59dc267 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Thu, 2 May 2013 19:25:11 +0800 Subject: spi/spi-atmel: BUG: fix doesn' support 16 bits transfers using PIO Fix using PIO transfer mode only support 8 bits transfer, doesn't support 16 bits. Signed-off-by: Richard Genoud [wenyou.yang@atmel.com: submit the patch] Signed-off-by: Wenyou Yang Signed-off-by: Mark Brown diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 787bd2c..d8cb7da 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -526,13 +526,17 @@ static void atmel_spi_next_xfer_pio(struct spi_master *master, } if (xfer->tx_buf) - spi_writel(as, TDR, *(u8 *)(xfer->tx_buf)); + if (xfer->bits_per_word > 8) + spi_writel(as, TDR, *(u16 *)(xfer->tx_buf)); + else + spi_writel(as, TDR, *(u8 *)(xfer->tx_buf)); else spi_writel(as, TDR, 0); dev_dbg(master->dev.parent, - " start pio xfer %p: len %u tx %p rx %p\n", - xfer, xfer->len, xfer->tx_buf, xfer->rx_buf); + " start pio xfer %p: len %u tx %p rx %p bitpw %d\n", + xfer, xfer->len, xfer->tx_buf, xfer->rx_buf, + xfer->bits_per_word); /* Enable relevant interrupts */ spi_writel(as, IER, SPI_BIT(RDRF) | SPI_BIT(OVRES)); @@ -950,21 +954,39 @@ atmel_spi_pump_pio_data(struct atmel_spi *as, struct spi_transfer *xfer) { u8 *txp; u8 *rxp; + u16 *txp16; + u16 *rxp16; unsigned long xfer_pos = xfer->len - as->current_remaining_bytes; if (xfer->rx_buf) { - rxp = ((u8 *)xfer->rx_buf) + xfer_pos; - *rxp = spi_readl(as, RDR); + if (xfer->bits_per_word > 8) { + rxp16 = (u16 *)(((u8 *)xfer->rx_buf) + xfer_pos); + *rxp16 = spi_readl(as, RDR); + } else { + rxp = ((u8 *)xfer->rx_buf) + xfer_pos; + *rxp = spi_readl(as, RDR); + } } else { spi_readl(as, RDR); } - - as->current_remaining_bytes--; + if (xfer->bits_per_word > 8) { + as->current_remaining_bytes -= 2; + if (as->current_remaining_bytes < 0) + as->current_remaining_bytes = 0; + } else { + as->current_remaining_bytes--; + } if (as->current_remaining_bytes) { if (xfer->tx_buf) { - txp = ((u8 *)xfer->tx_buf) + xfer_pos + 1; - spi_writel(as, TDR, *txp); + if (xfer->bits_per_word > 8) { + txp16 = (u16 *)(((u8 *)xfer->tx_buf) + + xfer_pos + 2); + spi_writel(as, TDR, *txp16); + } else { + txp = ((u8 *)xfer->tx_buf) + xfer_pos + 1; + spi_writel(as, TDR, *txp); + } } else { spi_writel(as, TDR, 0); } @@ -1378,6 +1400,13 @@ static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg) } } + if (xfer->bits_per_word > 8) { + if (xfer->len % 2) { + dev_dbg(&spi->dev, "buffer len should be 16 bits aligned\n"); + return -EINVAL; + } + } + /* FIXME implement these protocol options!! */ if (xfer->speed_hz) { dev_dbg(&spi->dev, "no protocol options yet\n"); -- cgit v0.10.2 From 31d6eebf7e079cfb5e98e65d5af4c6de093e076c Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Thu, 2 May 2013 10:19:11 -0400 Subject: regulator: Fix kernel-doc generation warnings. Add a couple kernel-doc lines to get rid of kernel-doc generation warnings, no functional change. Signed-off-by: Robert P. J. Day Signed-off-by: Mark Brown diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 6e50178..014c92a 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1539,7 +1539,10 @@ static void regulator_ena_gpio_free(struct regulator_dev *rdev) } /** - * Balance enable_count of each GPIO and actual GPIO pin control. + * regulator_ena_gpio_ctrl - balance enable_count of each GPIO and actual GPIO pin control + * @rdev: regulator_dev structure + * @enable: enable GPIO at initial use? + * * GPIO is enabled in case of initial use. (enable_count is 0) * GPIO is disabled when it is not shared any more. (enable_count <= 1) */ -- cgit v0.10.2 From a9b054e8ab06504c2afa0e307ee78d3778993a1d Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Thu, 2 May 2013 09:43:05 +0200 Subject: drm: don't check modeset locks in panic handler Since we know that locking is broken in that case and it's more important to not flood the dmesg with random gunk. Cc: Dave Airlie Cc: Borislav Petkov References: http://lkml.kernel.org/r/20130502000206.GH15623@pd.tnic Cc: stable@vger.kernel.org Reported-and-tested-by: Borislav Petkov Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 792c3e3..3be0802 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -78,6 +78,10 @@ void drm_warn_on_modeset_not_all_locked(struct drm_device *dev) { struct drm_crtc *crtc; + /* Locking is currently fubar in the panic handler. */ + if (oops_in_progress) + return; + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) WARN_ON(!mutex_is_locked(&crtc->mutex)); -- cgit v0.10.2 From 237a1b01fdb29df6a28d50d6dbe7a988c4fb3625 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 1 May 2013 12:18:43 -0700 Subject: lp8788-charger: Fix kconfig dependency Fix build errors in lp8788-charger by making it depend on IIO. Fixes errors when CONFIG_IIO=m and CHARGER_LP8788=y. lp8788-charger.c:(.text+0x2146b5): undefined reference to `iio_channel_get' lp8788-charger.c:(.text+0x2146ce): undefined reference to `iio_channel_get' lp8788-charger.c:(.text+0x214a86): undefined reference to `iio_read_channel_processed' lp8788-charger.c:(.text+0x214b51): undefined reference to `iio_read_channel_processed' lp8788-charger.c:(.text+0x214c30): undefined reference to `iio_read_channel_processed' lp8788-charger.c:(.text+0x214d93): undefined reference to `iio_channel_release' lp8788-charger.c:(.text+0x214dac): undefined reference to `iio_channel_release' Signed-off-by: Randy Dunlap Acked-by: Milo Kim Signed-off-by: Anton Vorontsov diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 339f802..814bcb9 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -284,6 +284,7 @@ config CHARGER_LP8788 tristate "TI LP8788 charger driver" depends on MFD_LP8788 depends on LP8788_ADC + depends on IIO help Say Y to enable support for the LP8788 linear charger. -- cgit v0.10.2 From e30b5dca15dea86aa697f9d58ff646294fe80d3d Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Fri, 3 May 2013 02:15:52 -0400 Subject: ext4: fix fio regression We (Linux Kernel Performance project) found a regression introduced by commit: f7fec032aa ext4: track all extent status in extent status tree The commit causes about 20% performance decrease in fio random write test. Profiler shows that rb_next() uses a lot of CPU time. The call stack is: rb_next ext4_es_find_delayed_extent ext4_map_blocks _ext4_get_block ext4_get_block_write __blockdev_direct_IO ext4_direct_IO generic_file_direct_write __generic_file_aio_write ext4_file_write aio_rw_vect_retry aio_run_iocb do_io_submit sys_io_submit system_call_fastpath io_submit td_io_getevents io_u_queued_complete thread_main main __libc_start_main The cause is that ext4_es_find_delayed_extent() doesn't have an upper bound, it keeps searching until a delayed extent is found. When there are a lots of non-delayed entries in the extent state tree, ext4_es_find_delayed_extent() may uses a lot of CPU time. Reported-by: LKP project Signed-off-by: Yan, Zheng Signed-off-by: Zheng Liu Cc: "Theodore Ts'o" diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 107936d..bc0f191 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -3642,7 +3642,7 @@ int ext4_find_delalloc_range(struct inode *inode, { struct extent_status es; - ext4_es_find_delayed_extent(inode, lblk_start, &es); + ext4_es_find_delayed_extent_range(inode, lblk_start, lblk_end, &es); if (es.es_len == 0) return 0; /* there is no delay extent in this tree */ else if (es.es_lblk <= lblk_start && @@ -4608,9 +4608,10 @@ static int ext4_find_delayed_extent(struct inode *inode, struct extent_status es; ext4_lblk_t block, next_del; - ext4_es_find_delayed_extent(inode, newes->es_lblk, &es); - if (newes->es_pblk == 0) { + ext4_es_find_delayed_extent_range(inode, newes->es_lblk, + newes->es_lblk + newes->es_len - 1, &es); + /* * No extent in extent-tree contains block @newes->es_pblk, * then the block may stay in 1)a hole or 2)delayed-extent. @@ -4630,7 +4631,7 @@ static int ext4_find_delayed_extent(struct inode *inode, } block = newes->es_lblk + newes->es_len; - ext4_es_find_delayed_extent(inode, block, &es); + ext4_es_find_delayed_extent_range(inode, block, EXT_MAX_BLOCKS, &es); if (es.es_len == 0) next_del = EXT_MAX_BLOCKS; else diff --git a/fs/ext4/extents_status.c b/fs/ext4/extents_status.c index fe3337a..e6941e6 100644 --- a/fs/ext4/extents_status.c +++ b/fs/ext4/extents_status.c @@ -232,14 +232,16 @@ static struct extent_status *__es_tree_search(struct rb_root *root, } /* - * ext4_es_find_delayed_extent: find the 1st delayed extent covering @es->lblk - * if it exists, otherwise, the next extent after @es->lblk. + * ext4_es_find_delayed_extent_range: find the 1st delayed extent covering + * @es->lblk if it exists, otherwise, the next extent after @es->lblk. * * @inode: the inode which owns delayed extents * @lblk: the offset where we start to search + * @end: the offset where we stop to search * @es: delayed extent that we found */ -void ext4_es_find_delayed_extent(struct inode *inode, ext4_lblk_t lblk, +void ext4_es_find_delayed_extent_range(struct inode *inode, + ext4_lblk_t lblk, ext4_lblk_t end, struct extent_status *es) { struct ext4_es_tree *tree = NULL; @@ -247,7 +249,8 @@ void ext4_es_find_delayed_extent(struct inode *inode, ext4_lblk_t lblk, struct rb_node *node; BUG_ON(es == NULL); - trace_ext4_es_find_delayed_extent_enter(inode, lblk); + BUG_ON(end < lblk); + trace_ext4_es_find_delayed_extent_range_enter(inode, lblk); read_lock(&EXT4_I(inode)->i_es_lock); tree = &EXT4_I(inode)->i_es_tree; @@ -270,6 +273,10 @@ out: if (es1 && !ext4_es_is_delayed(es1)) { while ((node = rb_next(&es1->rb_node)) != NULL) { es1 = rb_entry(node, struct extent_status, rb_node); + if (es1->es_lblk > end) { + es1 = NULL; + break; + } if (ext4_es_is_delayed(es1)) break; } @@ -285,7 +292,7 @@ out: read_unlock(&EXT4_I(inode)->i_es_lock); ext4_es_lru_add(inode); - trace_ext4_es_find_delayed_extent_exit(inode, es); + trace_ext4_es_find_delayed_extent_range_exit(inode, es); } static struct extent_status * diff --git a/fs/ext4/extents_status.h b/fs/ext4/extents_status.h index d8e2d4d..f740eb03 100644 --- a/fs/ext4/extents_status.h +++ b/fs/ext4/extents_status.h @@ -62,7 +62,8 @@ extern int ext4_es_insert_extent(struct inode *inode, ext4_lblk_t lblk, unsigned long long status); extern int ext4_es_remove_extent(struct inode *inode, ext4_lblk_t lblk, ext4_lblk_t len); -extern void ext4_es_find_delayed_extent(struct inode *inode, ext4_lblk_t lblk, +extern void ext4_es_find_delayed_extent_range(struct inode *inode, + ext4_lblk_t lblk, ext4_lblk_t end, struct extent_status *es); extern int ext4_es_lookup_extent(struct inode *inode, ext4_lblk_t lblk, struct extent_status *es); diff --git a/fs/ext4/file.c b/fs/ext4/file.c index 64848b5..1bc4523 100644 --- a/fs/ext4/file.c +++ b/fs/ext4/file.c @@ -464,7 +464,7 @@ static loff_t ext4_seek_data(struct file *file, loff_t offset, loff_t maxsize) * If there is a delay extent at this offset, * it will be as a data. */ - ext4_es_find_delayed_extent(inode, last, &es); + ext4_es_find_delayed_extent_range(inode, last, last, &es); if (es.es_len != 0 && in_range(last, es.es_lblk, es.es_len)) { if (last != start) dataoff = last << blkbits; @@ -547,7 +547,7 @@ static loff_t ext4_seek_hole(struct file *file, loff_t offset, loff_t maxsize) * If there is a delay extent at this offset, * we will skip this extent. */ - ext4_es_find_delayed_extent(inode, last, &es); + ext4_es_find_delayed_extent_range(inode, last, last, &es); if (es.es_len != 0 && in_range(last, es.es_lblk, es.es_len)) { last = es.es_lblk + es.es_len; holeoff = last << blkbits; diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h index d0e6864..8ee15b9 100644 --- a/include/trace/events/ext4.h +++ b/include/trace/events/ext4.h @@ -2139,7 +2139,7 @@ TRACE_EVENT(ext4_es_remove_extent, __entry->lblk, __entry->len) ); -TRACE_EVENT(ext4_es_find_delayed_extent_enter, +TRACE_EVENT(ext4_es_find_delayed_extent_range_enter, TP_PROTO(struct inode *inode, ext4_lblk_t lblk), TP_ARGS(inode, lblk), @@ -2161,7 +2161,7 @@ TRACE_EVENT(ext4_es_find_delayed_extent_enter, (unsigned long) __entry->ino, __entry->lblk) ); -TRACE_EVENT(ext4_es_find_delayed_extent_exit, +TRACE_EVENT(ext4_es_find_delayed_extent_range_exit, TP_PROTO(struct inode *inode, struct extent_status *es), TP_ARGS(inode, es), -- cgit v0.10.2 From 4ef69d0394cba8caa9f75d3f2e53429bfb8b3045 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 27 Apr 2013 11:47:01 +0200 Subject: ath9k: fix key allocation error handling for powersave keys If no keycache slots are available, ath_key_config can return -ENOSPC. If the key index is not checked for errors, it can lead to logspam that looks like this: "ath: wiphy0: keyreset: keycache entry 228 out of range" This can cause follow-up errors if the invalid keycache index gets used for tx. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 6963862..c4fc3d1 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1332,6 +1332,7 @@ static int ath9k_sta_add(struct ieee80211_hw *hw, struct ath_common *common = ath9k_hw_common(sc->sc_ah); struct ath_node *an = (struct ath_node *) sta->drv_priv; struct ieee80211_key_conf ps_key = { }; + int key; ath_node_attach(sc, sta, vif); @@ -1339,7 +1340,9 @@ static int ath9k_sta_add(struct ieee80211_hw *hw, vif->type != NL80211_IFTYPE_AP_VLAN) return 0; - an->ps_key = ath_key_config(common, vif, sta, &ps_key); + key = ath_key_config(common, vif, sta, &ps_key); + if (key > 0) + an->ps_key = key; return 0; } @@ -1356,6 +1359,7 @@ static void ath9k_del_ps_key(struct ath_softc *sc, return; ath_key_delete(common, &ps_key); + an->ps_key = 0; } static int ath9k_sta_remove(struct ieee80211_hw *hw, -- cgit v0.10.2 From db178340433f90e09ada35c174dfb2c84c2c71f4 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Thu, 2 May 2013 09:43:57 +0200 Subject: ath5k: do not reschedule tx_complete_work on stop This patch claim to fix "WARNING: at net/mac80211/util.c:599 ieee80211_can_queue_work.isra.7+0x30/0x40", which was reported at: https://bugzilla.redhat.com/show_bug.cgi?id=922295 We use ATH_STAT_STARTED flag to disallow to perform ath5k_tx_complete_poll_work() code, hence reschedule ah->tx_complete_work, when we stop device. This flag was defined in ath5k code, but it was not used. I didn't get feedback if the fix works, so patch is compile only tested. Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 9b20d9e..7f702fe 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -2369,6 +2369,9 @@ ath5k_tx_complete_poll_work(struct work_struct *work) int i; bool needreset = false; + if (!test_bit(ATH_STAT_STARTED, ah->status)) + return; + mutex_lock(&ah->lock); for (i = 0; i < ARRAY_SIZE(ah->txqs); i++) { @@ -2676,6 +2679,7 @@ done: mmiowb(); mutex_unlock(&ah->lock); + set_bit(ATH_STAT_STARTED, ah->status); ieee80211_queue_delayed_work(ah->hw, &ah->tx_complete_work, msecs_to_jiffies(ATH5K_TX_COMPLETE_POLL_INT)); @@ -2737,6 +2741,7 @@ void ath5k_stop(struct ieee80211_hw *hw) ath5k_stop_tasklets(ah); + clear_bit(ATH_STAT_STARTED, ah->status); cancel_delayed_work_sync(&ah->tx_complete_work); if (!ath5k_modparam_no_hw_rfkill_switch) -- cgit v0.10.2 From 2acd09f3232825a0e95134703ec59bc327ef9967 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Thu, 25 Apr 2013 15:04:02 -0700 Subject: target: Remove unused struct members in se_dev_entry Some were incremented, but never used anywhere from what I could tell. Signed-off-by: Andy Grover Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index 2e4d655..4630481 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -68,7 +68,6 @@ transport_lookup_cmd_lun(struct se_cmd *se_cmd, u32 unpacked_lun) struct se_dev_entry *deve = se_cmd->se_deve; deve->total_cmds++; - deve->total_bytes += se_cmd->data_length; if ((se_cmd->data_direction == DMA_TO_DEVICE) && (deve->lun_flags & TRANSPORT_LUNFLAGS_READ_ONLY)) { @@ -85,8 +84,6 @@ transport_lookup_cmd_lun(struct se_cmd *se_cmd, u32 unpacked_lun) else if (se_cmd->data_direction == DMA_FROM_DEVICE) deve->read_bytes += se_cmd->data_length; - deve->deve_cmds++; - se_lun = deve->se_lun; se_cmd->se_lun = deve->se_lun; se_cmd->pr_res_key = deve->pr_res_key; @@ -275,17 +272,6 @@ int core_free_device_list_for_node( return 0; } -void core_dec_lacl_count(struct se_node_acl *se_nacl, struct se_cmd *se_cmd) -{ - struct se_dev_entry *deve; - unsigned long flags; - - spin_lock_irqsave(&se_nacl->device_list_lock, flags); - deve = se_nacl->device_list[se_cmd->orig_fe_lun]; - deve->deve_cmds--; - spin_unlock_irqrestore(&se_nacl->device_list_lock, flags); -} - void core_update_device_list_access( u32 mapped_lun, u32 lun_access, diff --git a/drivers/target/target_core_internal.h b/drivers/target/target_core_internal.h index 853bab6..18d49df 100644 --- a/drivers/target/target_core_internal.h +++ b/drivers/target/target_core_internal.h @@ -8,7 +8,6 @@ extern struct t10_alua_lu_gp *default_lu_gp; struct se_dev_entry *core_get_se_deve_from_rtpi(struct se_node_acl *, u16); int core_free_device_list_for_node(struct se_node_acl *, struct se_portal_group *); -void core_dec_lacl_count(struct se_node_acl *, struct se_cmd *); void core_update_device_list_access(u32, u32, struct se_node_acl *); int core_enable_device_list_for_node(struct se_lun *, struct se_lun_acl *, u32, u32, struct se_node_acl *, struct se_portal_group *); diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index f8388b4..c3477fa 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2163,8 +2163,6 @@ void transport_generic_free_cmd(struct se_cmd *cmd, int wait_for_tasks) if (wait_for_tasks) transport_wait_for_tasks(cmd); - core_dec_lacl_count(cmd->se_sess->se_node_acl, cmd); - if (cmd->se_lun) transport_lun_remove_cmd(cmd); diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index c4af592..136b7b2 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -572,12 +572,8 @@ struct se_dev_entry { bool def_pr_registered; /* See transport_lunflags_table */ u32 lun_flags; - u32 deve_cmds; u32 mapped_lun; - u32 average_bytes; - u32 last_byte_count; u32 total_cmds; - u32 total_bytes; u64 pr_res_key; u64 creation_time; u32 attach_count; -- cgit v0.10.2 From e3e84cda321703b123f36488f50700f371bc7230 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Fri, 26 Apr 2013 11:09:03 -0700 Subject: target: Use FD_MAX_SECTORS/FD_BLOCKSIZE for blockdevs using fileio We can still see the error reported in https://patchwork.kernel.org/patch/2338981/ when using fileio backed by a block device. I'm assuming this will get us past that error (from sbc_parse_cdb), and also assuming it's OK to have our max_sectors be larger than the block's queue max hw sectors? Reported-by: Eric Harney Signed-off-by: Andy Grover Cc: Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_file.c b/drivers/target/target_core_file.c index 58ed683..1b1d544 100644 --- a/drivers/target/target_core_file.c +++ b/drivers/target/target_core_file.c @@ -153,10 +153,6 @@ static int fd_configure_device(struct se_device *dev) struct request_queue *q = bdev_get_queue(inode->i_bdev); unsigned long long dev_size; - dev->dev_attrib.hw_block_size = - bdev_logical_block_size(inode->i_bdev); - dev->dev_attrib.hw_max_sectors = queue_max_hw_sectors(q); - /* * Determine the number of bytes from i_size_read() minus * one (1) logical sector from underlying struct block_device @@ -203,9 +199,6 @@ static int fd_configure_device(struct se_device *dev) goto fail; } - dev->dev_attrib.hw_block_size = FD_BLOCKSIZE; - dev->dev_attrib.hw_max_sectors = FD_MAX_SECTORS; - /* * Limit UNMAP emulation to 8k Number of LBAs (NoLB) */ @@ -226,6 +219,8 @@ static int fd_configure_device(struct se_device *dev) fd_dev->fd_block_size = dev->dev_attrib.hw_block_size; + dev->dev_attrib.hw_block_size = FD_BLOCKSIZE; + dev->dev_attrib.hw_max_sectors = FD_MAX_SECTORS; dev->dev_attrib.hw_queue_depth = FD_MAX_DEVICE_QUEUE_DEPTH; if (fd_dev->fbd_flags & FDBD_HAS_BUFFERED_IO_WCE) { -- cgit v0.10.2 From 64146db71e1aab919a3861d4ac958086da3a0973 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Tue, 30 Apr 2013 11:59:15 -0700 Subject: target: Have dev/enable show if TCM device is configured User tools need to know if the device is properly configured, since if not, some other attributes are invalid. Signed-off-by: Andy Grover Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c index 43b7ac6..4a8bd36 100644 --- a/drivers/target/target_core_configfs.c +++ b/drivers/target/target_core_configfs.c @@ -1584,6 +1584,13 @@ static struct target_core_configfs_attribute target_core_attr_dev_udev_path = { .store = target_core_store_dev_udev_path, }; +static ssize_t target_core_show_dev_enable(void *p, char *page) +{ + struct se_device *dev = p; + + return snprintf(page, PAGE_SIZE, "%d\n", !!(dev->dev_flags & DF_CONFIGURED)); +} + static ssize_t target_core_store_dev_enable( void *p, const char *page, @@ -1609,8 +1616,8 @@ static ssize_t target_core_store_dev_enable( static struct target_core_configfs_attribute target_core_attr_dev_enable = { .attr = { .ca_owner = THIS_MODULE, .ca_name = "enable", - .ca_mode = S_IWUSR }, - .show = NULL, + .ca_mode = S_IRUGO | S_IWUSR }, + .show = target_core_show_dev_enable, .store = target_core_store_dev_enable, }; -- cgit v0.10.2 From bfbdb31d41b3d868449de272da746d1c2d0b764e Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Fri, 3 May 2013 16:46:41 -0700 Subject: iscsi-target: Fix NULL pointer dereference in iscsit_send_reject Fix up a NULL pointer dereference regression in iscsit_send_reject() introduced by from commit 2ec5a8c11. Reported-by: Geert Uytterhoeven Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index ffbc6a9..c230eac 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -3557,11 +3557,11 @@ static int iscsit_send_reject( struct iscsi_cmd *cmd, struct iscsi_conn *conn) { - u32 iov_count = 0, tx_size = 0; - struct iscsi_reject *hdr; + struct iscsi_reject *hdr = (struct iscsi_reject *)&cmd->pdu[0]; struct kvec *iov; + u32 iov_count = 0, tx_size; - iscsit_build_reject(cmd, conn, (struct iscsi_reject *)&cmd->pdu[0]); + iscsit_build_reject(cmd, conn, hdr); iov = &cmd->iov_misc[0]; iov[iov_count].iov_base = cmd->pdu; -- cgit v0.10.2 From 80690fdb959a652e02d4f40a684bd39586be9f32 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 3 May 2013 23:15:57 +0200 Subject: iscsi-target: Make buf param of iscsit_do_crypto_hash_buf() const void * Make the "buf" input param of iscsit_do_crypto_hash_buf() "const void *". This allows to remove lots of casts in its callers. Signed-off-by: Geert Uytterhoeven Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index c230eac..262ef1f 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -1250,7 +1250,7 @@ static u32 iscsit_do_crypto_hash_sg( static void iscsit_do_crypto_hash_buf( struct hash_desc *hash, - unsigned char *buf, + const void *buf, u32 payload_length, u32 padding, u8 *pad_bytes, @@ -2524,9 +2524,8 @@ static int iscsit_send_conn_drop_async_message( if (conn->conn_ops->HeaderDigest) { u32 *header_digest = (u32 *)&cmd->pdu[ISCSI_HDR_LEN]; - iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, - (unsigned char *)hdr, ISCSI_HDR_LEN, - 0, NULL, (u8 *)header_digest); + iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, hdr, + ISCSI_HDR_LEN, 0, NULL, (u8 *)header_digest); cmd->tx_size += ISCSI_CRC_LEN; pr_debug("Attaching CRC32C HeaderDigest to" @@ -2662,9 +2661,8 @@ static int iscsit_send_datain(struct iscsi_cmd *cmd, struct iscsi_conn *conn) if (conn->conn_ops->HeaderDigest) { u32 *header_digest = (u32 *)&cmd->pdu[ISCSI_HDR_LEN]; - iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, - (unsigned char *)cmd->pdu, ISCSI_HDR_LEN, - 0, NULL, (u8 *)header_digest); + iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, cmd->pdu, + ISCSI_HDR_LEN, 0, NULL, (u8 *)header_digest); iov[0].iov_len += ISCSI_CRC_LEN; tx_size += ISCSI_CRC_LEN; @@ -2841,9 +2839,8 @@ iscsit_send_logout(struct iscsi_cmd *cmd, struct iscsi_conn *conn) if (conn->conn_ops->HeaderDigest) { u32 *header_digest = (u32 *)&cmd->pdu[ISCSI_HDR_LEN]; - iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, - (unsigned char *)&cmd->pdu[0], ISCSI_HDR_LEN, - 0, NULL, (u8 *)header_digest); + iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, &cmd->pdu[0], + ISCSI_HDR_LEN, 0, NULL, (u8 *)header_digest); iov[0].iov_len += ISCSI_CRC_LEN; tx_size += ISCSI_CRC_LEN; @@ -2900,9 +2897,8 @@ static int iscsit_send_unsolicited_nopin( if (conn->conn_ops->HeaderDigest) { u32 *header_digest = (u32 *)&cmd->pdu[ISCSI_HDR_LEN]; - iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, - (unsigned char *)hdr, ISCSI_HDR_LEN, - 0, NULL, (u8 *)header_digest); + iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, hdr, + ISCSI_HDR_LEN, 0, NULL, (u8 *)header_digest); tx_size += ISCSI_CRC_LEN; pr_debug("Attaching CRC32C HeaderDigest to" @@ -2949,9 +2945,8 @@ iscsit_send_nopin(struct iscsi_cmd *cmd, struct iscsi_conn *conn) if (conn->conn_ops->HeaderDigest) { u32 *header_digest = (u32 *)&cmd->pdu[ISCSI_HDR_LEN]; - iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, - (unsigned char *)hdr, ISCSI_HDR_LEN, - 0, NULL, (u8 *)header_digest); + iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, hdr, + ISCSI_HDR_LEN, 0, NULL, (u8 *)header_digest); iov[0].iov_len += ISCSI_CRC_LEN; tx_size += ISCSI_CRC_LEN; @@ -3040,9 +3035,8 @@ static int iscsit_send_r2t( if (conn->conn_ops->HeaderDigest) { u32 *header_digest = (u32 *)&cmd->pdu[ISCSI_HDR_LEN]; - iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, - (unsigned char *)hdr, ISCSI_HDR_LEN, - 0, NULL, (u8 *)header_digest); + iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, hdr, + ISCSI_HDR_LEN, 0, NULL, (u8 *)header_digest); cmd->iov_misc[0].iov_len += ISCSI_CRC_LEN; tx_size += ISCSI_CRC_LEN; @@ -3256,9 +3250,8 @@ static int iscsit_send_response(struct iscsi_cmd *cmd, struct iscsi_conn *conn) if (conn->conn_ops->HeaderDigest) { u32 *header_digest = (u32 *)&cmd->pdu[ISCSI_HDR_LEN]; - iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, - (unsigned char *)cmd->pdu, ISCSI_HDR_LEN, - 0, NULL, (u8 *)header_digest); + iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, cmd->pdu, + ISCSI_HDR_LEN, 0, NULL, (u8 *)header_digest); iov[0].iov_len += ISCSI_CRC_LEN; tx_size += ISCSI_CRC_LEN; @@ -3329,9 +3322,8 @@ iscsit_send_task_mgt_rsp(struct iscsi_cmd *cmd, struct iscsi_conn *conn) if (conn->conn_ops->HeaderDigest) { u32 *header_digest = (u32 *)&cmd->pdu[ISCSI_HDR_LEN]; - iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, - (unsigned char *)hdr, ISCSI_HDR_LEN, - 0, NULL, (u8 *)header_digest); + iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, hdr, + ISCSI_HDR_LEN, 0, NULL, (u8 *)header_digest); cmd->iov_misc[0].iov_len += ISCSI_CRC_LEN; tx_size += ISCSI_CRC_LEN; @@ -3504,9 +3496,8 @@ static int iscsit_send_text_rsp( if (conn->conn_ops->HeaderDigest) { u32 *header_digest = (u32 *)&cmd->pdu[ISCSI_HDR_LEN]; - iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, - (unsigned char *)hdr, ISCSI_HDR_LEN, - 0, NULL, (u8 *)header_digest); + iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, hdr, + ISCSI_HDR_LEN, 0, NULL, (u8 *)header_digest); iov[0].iov_len += ISCSI_CRC_LEN; tx_size += ISCSI_CRC_LEN; @@ -3574,9 +3565,8 @@ static int iscsit_send_reject( if (conn->conn_ops->HeaderDigest) { u32 *header_digest = (u32 *)&cmd->pdu[ISCSI_HDR_LEN]; - iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, - (unsigned char *)hdr, ISCSI_HDR_LEN, - 0, NULL, (u8 *)header_digest); + iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, hdr, + ISCSI_HDR_LEN, 0, NULL, (u8 *)header_digest); iov[0].iov_len += ISCSI_CRC_LEN; tx_size += ISCSI_CRC_LEN; @@ -3585,9 +3575,8 @@ static int iscsit_send_reject( } if (conn->conn_ops->DataDigest) { - iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, - (unsigned char *)cmd->buf_ptr, ISCSI_HDR_LEN, - 0, NULL, (u8 *)&cmd->data_crc); + iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, cmd->buf_ptr, + ISCSI_HDR_LEN, 0, NULL, (u8 *)&cmd->data_crc); iov[iov_count].iov_base = &cmd->data_crc; iov[iov_count++].iov_len = ISCSI_CRC_LEN; -- cgit v0.10.2 From 657445fe8660100ad174600ebfa61536392b7624 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sat, 4 May 2013 10:09:18 +0200 Subject: Revert "drm/i915: revert eDP bpp clamping code changes" This reverts commit 57c219633275c7e7413f8bc7be250dc092887458. It's an ugly hack for a Haswell SDV platform where the vbt doesn't seem to fully agree with the panel. Since it seems to cause issues on real eDP platform let's just kill this hack again. Reported-and-tested-by: Josh Boyer References: https://lkml.org/lkml/2013/5/3/467 Cc: Paulo Zanoni Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index fc3bd9b..0ab9813 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -702,6 +702,9 @@ intel_dp_compute_config(struct intel_encoder *encoder, /* Walk through all bpp values. Luckily they're all nicely spaced with 2 * bpc in between. */ bpp = min_t(int, 8*3, pipe_config->pipe_bpp); + if (is_edp(intel_dp) && dev_priv->edp.bpp) + bpp = min_t(int, bpp, dev_priv->edp.bpp); + for (; bpp >= 6*3; bpp -= 2*3) { mode_rate = intel_dp_link_required(target_clock, bpp); @@ -739,6 +742,7 @@ found: intel_dp->link_bw = bws[clock]; intel_dp->lane_count = lane_count; adjusted_mode->clock = drm_dp_bw_code_to_link_rate(intel_dp->link_bw); + pipe_config->pipe_bpp = bpp; pipe_config->pixel_target_clock = target_clock; DRM_DEBUG_KMS("DP link bw %02x lane count %d clock %d bpp %d\n", @@ -751,20 +755,6 @@ found: target_clock, adjusted_mode->clock, &pipe_config->dp_m_n); - /* - * XXX: We have a strange regression where using the vbt edp bpp value - * for the link bw computation results in black screens, the panel only - * works when we do the computation at the usual 24bpp (but still - * requires us to use 18bpp). Until that's fully debugged, stay - * bug-for-bug compatible with the old code. - */ - if (is_edp(intel_dp) && dev_priv->edp.bpp) { - DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", - bpp, dev_priv->edp.bpp); - bpp = min_t(int, bpp, dev_priv->edp.bpp); - } - pipe_config->pipe_bpp = bpp; - return true; } -- cgit v0.10.2 From 3ab9c63705cb7b1b9f83ddce725d8bd9ef7c66a9 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Fri, 3 May 2013 12:57:41 +0300 Subject: drm/i915: hsw: fix link training for eDP on port-A According to BSpec the link training sequence for eDP on HSW port-A should be as follows: 1. link training: clock recovery 2. link training: equalization 3. link training: set idle transmission mode 4. display pipe enable 5. link training: disable (set normal mode) Contrary to this at the moment we don't do step 3. and we do step 5. before step 4. Fix this by setting idle transmission mode for eDP at the end of intel_dp_complete_link_train and adding a new intel_dp_stop_link_training function to disable link training. With these changes we'll end up with the following functions corresponding to the above steps: intel_dp_start_link_train -> step 1. intel_dp_complete_link_train -> step 2., step 3. intel_dp_stop_link_train -> step 5. For port-A we'll call intel_dp_stop_link_train only after enabling the pipe, for everything else we'll call it right after intel_dp_complete_link_train to preserve the current behavior. Tested on HSW/HSW-ULT. In v2: - Due to a HW issue we must set idle transmission mode for port-A too before enabling the pipe. Thanks for Arthur Runyan for explaining this. - Update the patch subject to make it clear that it's an eDP fix, DP is not affected. v3: - rename intel_dp_link_train() to intel_dp_set_link_train(), use 'val' instead 'l' as var name. (Paulo) Signed-off-by: Imre Deak Reviewed-by: Paulo Zanoni Tested-by: Paulo Zanoni Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index 26a0a57..fb961bb 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -1265,6 +1265,8 @@ static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder) intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); intel_dp_start_link_train(intel_dp); intel_dp_complete_link_train(intel_dp); + if (port != PORT_A) + intel_dp_stop_link_train(intel_dp); } } @@ -1326,6 +1328,9 @@ static void intel_enable_ddi(struct intel_encoder *intel_encoder) } else if (type == INTEL_OUTPUT_EDP) { struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + if (port == PORT_A) + intel_dp_stop_link_train(intel_dp); + ironlake_edp_backlight_on(intel_dp); } diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 0ab9813..93694da 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1379,6 +1379,7 @@ static void intel_enable_dp(struct intel_encoder *encoder) ironlake_edp_panel_on(intel_dp); ironlake_edp_panel_vdd_off(intel_dp, true); intel_dp_complete_link_train(intel_dp); + intel_dp_stop_link_train(intel_dp); ironlake_edp_backlight_on(intel_dp); } @@ -1701,10 +1702,9 @@ intel_dp_set_link_train(struct intel_dp *intel_dp, struct drm_i915_private *dev_priv = dev->dev_private; enum port port = intel_dig_port->port; int ret; - uint32_t temp; if (HAS_DDI(dev)) { - temp = I915_READ(DP_TP_CTL(port)); + uint32_t temp = I915_READ(DP_TP_CTL(port)); if (dp_train_pat & DP_LINK_SCRAMBLING_DISABLE) temp |= DP_TP_CTL_SCRAMBLE_DISABLE; @@ -1714,18 +1714,6 @@ intel_dp_set_link_train(struct intel_dp *intel_dp, temp &= ~DP_TP_CTL_LINK_TRAIN_MASK; switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) { case DP_TRAINING_PATTERN_DISABLE: - - if (port != PORT_A) { - temp |= DP_TP_CTL_LINK_TRAIN_IDLE; - I915_WRITE(DP_TP_CTL(port), temp); - - if (wait_for((I915_READ(DP_TP_STATUS(port)) & - DP_TP_STATUS_IDLE_DONE), 1)) - DRM_ERROR("Timed out waiting for DP idle patterns\n"); - - temp &= ~DP_TP_CTL_LINK_TRAIN_MASK; - } - temp |= DP_TP_CTL_LINK_TRAIN_NORMAL; break; @@ -1801,6 +1789,37 @@ intel_dp_set_link_train(struct intel_dp *intel_dp, return true; } +static void intel_dp_set_idle_link_train(struct intel_dp *intel_dp) +{ + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = intel_dig_port->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + enum port port = intel_dig_port->port; + uint32_t val; + + if (!HAS_DDI(dev)) + return; + + val = I915_READ(DP_TP_CTL(port)); + val &= ~DP_TP_CTL_LINK_TRAIN_MASK; + val |= DP_TP_CTL_LINK_TRAIN_IDLE; + I915_WRITE(DP_TP_CTL(port), val); + + /* + * On PORT_A we can have only eDP in SST mode. There the only reason + * we need to set idle transmission mode is to work around a HW issue + * where we enable the pipe while not in idle link-training mode. + * In this case there is requirement to wait for a minimum number of + * idle patterns to be sent. + */ + if (port == PORT_A) + return; + + if (wait_for((I915_READ(DP_TP_STATUS(port)) & DP_TP_STATUS_IDLE_DONE), + 1)) + DRM_ERROR("Timed out waiting for DP idle patterns\n"); +} + /* Enable corresponding port and start training pattern 1 */ void intel_dp_start_link_train(struct intel_dp *intel_dp) @@ -1943,10 +1962,19 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) ++tries; } + intel_dp_set_idle_link_train(intel_dp); + + intel_dp->DP = DP; + if (channel_eq) DRM_DEBUG_KMS("Channel EQ done. DP Training successfull\n"); - intel_dp_set_link_train(intel_dp, DP, DP_TRAINING_PATTERN_DISABLE); +} + +void intel_dp_stop_link_train(struct intel_dp *intel_dp) +{ + intel_dp_set_link_train(intel_dp, intel_dp->DP, + DP_TRAINING_PATTERN_DISABLE); } static void @@ -2154,6 +2182,7 @@ intel_dp_check_link_status(struct intel_dp *intel_dp) drm_get_encoder_name(&intel_encoder->base)); intel_dp_start_link_train(intel_dp); intel_dp_complete_link_train(intel_dp); + intel_dp_stop_link_train(intel_dp); } } diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index b5b6d19..624a9e6 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -499,6 +499,7 @@ extern void intel_dp_init_connector(struct intel_digital_port *intel_dig_port, extern void intel_dp_init_link_config(struct intel_dp *intel_dp); extern void intel_dp_start_link_train(struct intel_dp *intel_dp); extern void intel_dp_complete_link_train(struct intel_dp *intel_dp); +extern void intel_dp_stop_link_train(struct intel_dp *intel_dp); extern void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode); extern void intel_dp_encoder_destroy(struct drm_encoder *encoder); extern void intel_dp_check_link_status(struct intel_dp *intel_dp); -- cgit v0.10.2 From 87c46b6c3d9c4d7f22bc553945728f5a82e9248a Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 4 May 2013 14:38:59 +0100 Subject: ARM: finally enable IRQ time accounting config We've had IRQ time accounting for the last six months, except for the Kconfig symbol. This somehow got missed out of the original patch. Add this now. Signed-off-by: Russell King diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 62079d4..b2d235d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -38,6 +38,7 @@ config ARM select HAVE_GENERIC_HARDIRQS select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)) select HAVE_IDE if PCI || ISA || PCMCIA + select HAVE_IRQ_TIME_ACCOUNTING select HAVE_KERNEL_GZIP select HAVE_KERNEL_LZMA select HAVE_KERNEL_LZO -- cgit v0.10.2 From 485cf5dac2966b93ef2b6211cf2fd42d66c823e6 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 24 Apr 2013 17:19:13 -0700 Subject: idle: Fix hlt/nohlt command-line handling in new generic idle commit d1669912 (idle: Implement generic idle function) added a new generic idle along with support for hlt/nohlt command line options to override default idle loop behavior. However, the command-line processing is never compiled. The command-line handling is wrapped by CONFIG_GENERIC_IDLE_POLL_SETUP and arches that use this feature select it in their Kconfigs. However, no Kconfig definition was created for this option, so it is never enabled, and therefore command-line override of the idle-loop behavior is broken after migrating to the generic idle loop. To fix, add a Kconfig definition for GENERIC_IDLE_POLL_SETUP. Tested on ARM (OMAP4/Panda) which enables the command-line overrides by default. Signed-off-by: Kevin Hilman Reviewed-by: Srivatsa S. Bhat Cc: Linus Torvalds Cc: Rusty Russell Cc: Paul McKenney Cc: Peter Zijlstra Cc: Magnus Damm Cc: linux-arm-kernel@lists.infradead.org Cc: linaro-kernel@lists.linaro.org Link: http://lkml.kernel.org/r/1366849153-25564-1-git-send-email-khilman@linaro.org Signed-off-by: Thomas Gleixner diff --git a/arch/Kconfig b/arch/Kconfig index 99f0e17..3e64403 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -213,6 +213,9 @@ config USE_GENERIC_SMP_HELPERS config GENERIC_SMP_IDLE_THREAD bool +config GENERIC_IDLE_POLL_SETUP + bool + # Select if arch init_task initializer is different to init/init_task.c config ARCH_INIT_TASK bool -- cgit v0.10.2 From fbd44a607a1a5019bc32c3615cead8c5ee8f89c9 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 3 May 2013 20:22:36 +0200 Subject: tick: Use zalloc_cpumask_var for allocating offstack cpumasks commit b352bc1cbc (tick: Convert broadcast cpu bitmaps to cpumask_var_t) broke CONFIG_CPUMASK_OFFSTACK in a very subtle way. Instead of allocating the cpumasks with zalloc_cpumask_var it uses alloc_cpumask_var, so we can get random data there, which of course confuses the logic completely and causes random failures. Reported-and-tested-by: Dave Jones Reported-and-tested-by: Yinghai Lu Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1305032015060.2990@ionos Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index 61d00a8..d70cdc4 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -785,11 +785,11 @@ bool tick_broadcast_oneshot_available(void) void __init tick_broadcast_init(void) { - alloc_cpumask_var(&tick_broadcast_mask, GFP_NOWAIT); - alloc_cpumask_var(&tmpmask, GFP_NOWAIT); + zalloc_cpumask_var(&tick_broadcast_mask, GFP_NOWAIT); + zalloc_cpumask_var(&tmpmask, GFP_NOWAIT); #ifdef CONFIG_TICK_ONESHOT - alloc_cpumask_var(&tick_broadcast_oneshot_mask, GFP_NOWAIT); - alloc_cpumask_var(&tick_broadcast_pending_mask, GFP_NOWAIT); - alloc_cpumask_var(&tick_broadcast_force_mask, GFP_NOWAIT); + zalloc_cpumask_var(&tick_broadcast_oneshot_mask, GFP_NOWAIT); + zalloc_cpumask_var(&tick_broadcast_pending_mask, GFP_NOWAIT); + zalloc_cpumask_var(&tick_broadcast_force_mask, GFP_NOWAIT); #endif } -- cgit v0.10.2 From e6155736ad76b2070652745f9e54cdea3f0d8567 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Sun, 5 May 2013 23:10:00 -0400 Subject: ext4: limit group search loop for non-extent files In the case where we are allocating for a non-extent file, we must limit the groups we allocate from to those below 2^32 blocks, and ext4_mb_regular_allocator() attempts to do this initially by putting a cap on ngroups for the subsequent search loop. However, the initial target group comes in from the allocation context (ac), and it may already be beyond the artificially limited ngroups. In this case, the limit if (group == ngroups) group = 0; at the top of the loop is never true, and the loop will run away. Catch this case inside the loop and reset the search to start at group 0. [sandeen@redhat.com: add commit msg & comments] Signed-off-by: Lachlan McIlroy Signed-off-by: Eric Sandeen Signed-off-by: "Theodore Ts'o" Cc: stable@vger.kernel.org diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index a11ea4d..39d30f1 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -2105,7 +2105,11 @@ repeat: group = ac->ac_g_ex.fe_group; for (i = 0; i < ngroups; group++, i++) { - if (group == ngroups) + /* + * Artificially restricted ngroups for non-extent + * files makes group > ngroups possible on first loop. + */ + if (group >= ngroups) group = 0; /* This now checks without needing the buddy page */ -- cgit v0.10.2 From 3c9cfa782e075cc2348b949ba139911aac02c7cb Mon Sep 17 00:00:00 2001 From: Heiko Abraham Date: Sun, 5 May 2013 19:49:49 -0700 Subject: Input: egalax_ts - ABS_MT_POSITION_Y not reported well The egalax_ts touchscreen modul not report ABS_MT_POSITION_Y proper. As result it may be, that upper software levels only receive x coordinates well. Signed-off-by: Heiko Abraham Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/egalax_ts.c b/drivers/input/touchscreen/egalax_ts.c index 17c9097..39f3df8 100644 --- a/drivers/input/touchscreen/egalax_ts.c +++ b/drivers/input/touchscreen/egalax_ts.c @@ -216,7 +216,7 @@ static int egalax_ts_probe(struct i2c_client *client, input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, EGALAX_MAX_X, 0, 0); input_set_abs_params(input_dev, - ABS_MT_POSITION_X, 0, EGALAX_MAX_Y, 0, 0); + ABS_MT_POSITION_Y, 0, EGALAX_MAX_Y, 0, 0); input_mt_init_slots(input_dev, MAX_SUPPORT_POINTS, 0); input_set_drvdata(input_dev, ts); -- cgit v0.10.2 From 56218563adbc085a17aa735da2c3fdf9877fa9e7 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Sun, 5 May 2013 19:56:18 -0700 Subject: Input: wacom - add three new display tablets Cintiq 13HD, DTK 2241, and Cintiq 22HDT are supported. Signed-off-by: Ping Cheng Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 0bfd8cf..afe4fe0 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -546,6 +546,16 @@ static int wacom_intuos_irq(struct wacom_wac *wacom) input_report_key(input, BTN_3, (data[6] & 0x08)); input_report_key(input, BTN_4, (data[6] & 0x10)); input_report_key(input, BTN_5, (data[6] & 0x20)); + } else if (features->type == WACOM_13HD) { + input_report_key(input, BTN_0, (data[3] & 0x01)); + input_report_key(input, BTN_1, (data[4] & 0x01)); + input_report_key(input, BTN_2, (data[4] & 0x02)); + input_report_key(input, BTN_3, (data[4] & 0x04)); + input_report_key(input, BTN_4, (data[4] & 0x08)); + input_report_key(input, BTN_5, (data[4] & 0x10)); + input_report_key(input, BTN_6, (data[4] & 0x20)); + input_report_key(input, BTN_7, (data[4] & 0x40)); + input_report_key(input, BTN_8, (data[4] & 0x80)); } else if (features->type == WACOM_24HD) { input_report_key(input, BTN_0, (data[6] & 0x01)); input_report_key(input, BTN_1, (data[6] & 0x02)); @@ -1301,6 +1311,7 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len) case INTUOS4L: case CINTIQ: case WACOM_BEE: + case WACOM_13HD: case WACOM_21UX2: case WACOM_22HD: case WACOM_24HD: @@ -1579,6 +1590,15 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, wacom_setup_cintiq(wacom_wac); break; + case WACOM_13HD: + for (i = 0; i < 9; i++) + __set_bit(BTN_0 + i, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); + wacom_setup_cintiq(wacom_wac); + break; + case INTUOS3: case INTUOS3L: __set_bit(BTN_4, input_dev->keybit); @@ -1950,6 +1970,9 @@ static const struct wacom_features wacom_features_0xC5 = static const struct wacom_features wacom_features_0xC6 = { "Wacom Cintiq 12WX", WACOM_PKGLEN_INTUOS, 53020, 33440, 1023, 63, WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; +static const struct wacom_features wacom_features_0x304 = + { "Wacom Cintiq 13HD", WACOM_PKGLEN_INTUOS, 59552, 33848, 1023, + 63, WACOM_13HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xC7 = { "Wacom DTU1931", WACOM_PKGLEN_GRAPHIRE, 37832, 30305, 511, 0, PL, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; @@ -1959,6 +1982,9 @@ static const struct wacom_features wacom_features_0xCE = static const struct wacom_features wacom_features_0xF0 = { "Wacom DTU1631", WACOM_PKGLEN_GRAPHIRE, 34623, 19553, 511, 0, DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x57 = + { "Wacom DTK2241", WACOM_PKGLEN_INTUOS, 95840, 54260, 2047, + 63, DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES}; static const struct wacom_features wacom_features_0x59 = /* Pen */ { "Wacom DTH2242", WACOM_PKGLEN_INTUOS, 95840, 54260, 2047, 63, DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, @@ -1972,6 +1998,12 @@ static const struct wacom_features wacom_features_0xCC = static const struct wacom_features wacom_features_0xFA = { "Wacom Cintiq 22HD", WACOM_PKGLEN_INTUOS, 95840, 54260, 2047, 63, WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; +static const struct wacom_features wacom_features_0x5B = + { "Wacom Cintiq 22HDT", WACOM_PKGLEN_INTUOS, 95840, 54260, 2047, + 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5e }; +static const struct wacom_features wacom_features_0x5E = + { "Wacom Cintiq 22HDT", .type = WACOM_24HDT, + .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5b, .touch_max = 10 }; static const struct wacom_features wacom_features_0x90 = { "Wacom ISDv4 90", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; @@ -2143,8 +2175,11 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0x43) }, { USB_DEVICE_WACOM(0x44) }, { USB_DEVICE_WACOM(0x45) }, + { USB_DEVICE_WACOM(0x57) }, { USB_DEVICE_WACOM(0x59) }, { USB_DEVICE_DETAILED(0x5D, USB_CLASS_HID, 0, 0) }, + { USB_DEVICE_WACOM(0x5B) }, + { USB_DEVICE_DETAILED(0x5E, USB_CLASS_HID, 0, 0) }, { USB_DEVICE_WACOM(0xB0) }, { USB_DEVICE_WACOM(0xB1) }, { USB_DEVICE_WACOM(0xB2) }, @@ -2205,6 +2240,7 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0x100) }, { USB_DEVICE_WACOM(0x101) }, { USB_DEVICE_WACOM(0x10D) }, + { USB_DEVICE_WACOM(0x304) }, { USB_DEVICE_WACOM(0x4001) }, { USB_DEVICE_WACOM(0x47) }, { USB_DEVICE_WACOM(0xF4) }, diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h index 5f9a772..dfc9e08 100644 --- a/drivers/input/tablet/wacom_wac.h +++ b/drivers/input/tablet/wacom_wac.h @@ -82,6 +82,7 @@ enum { WACOM_24HD, CINTIQ, WACOM_BEE, + WACOM_13HD, WACOM_MO, WIRELESS, BAMBOO_PT, -- cgit v0.10.2 From f0aaceac279477f2a830e2897e6fc4c3500fc683 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Sun, 5 May 2013 19:59:05 -0700 Subject: Input: wacom - add a few new styli for Cintiq series Add new styli for Cintiq 13HD and 22HD. Update comments for for tools. Check whole 10 nibbles of tool ID for tool types. Remove unuecessary tool type for Intuos series PAD. Signed-off-by: Ping Cheng Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index afe4fe0..3b6998a 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -342,10 +342,10 @@ static int wacom_intuos_inout(struct wacom_wac *wacom) wacom->id[idx] = (data[2] << 4) | (data[3] >> 4) | ((data[7] & 0x0f) << 20) | ((data[8] & 0xf0) << 12); - switch (wacom->id[idx] & 0xfffff) { + switch (wacom->id[idx]) { case 0x812: /* Inking pen */ case 0x801: /* Intuos3 Inking pen */ - case 0x20802: /* Intuos4 Inking Pen */ + case 0x120802: /* Intuos4/5 Inking Pen */ case 0x012: wacom->tool[idx] = BTN_TOOL_PENCIL; break; @@ -356,11 +356,13 @@ static int wacom_intuos_inout(struct wacom_wac *wacom) case 0x823: /* Intuos3 Grip Pen */ case 0x813: /* Intuos3 Classic Pen */ case 0x885: /* Intuos3 Marker Pen */ - case 0x802: /* Intuos4 General Pen */ - case 0x804: /* Intuos4 Marker Pen */ - case 0x40802: /* Intuos4 Classic Pen */ - case 0x18802: /* DTH2242 Grip Pen */ + case 0x802: /* Intuos4/5 13HD/24HD General Pen */ + case 0x804: /* Intuos4/5 13HD/24HD Marker Pen */ case 0x022: + case 0x100804: /* Intuos4/5 13HD/24HD Art Pen */ + case 0x140802: /* Intuos4/5 13HD/24HD Classic Pen */ + case 0x160802: /* Cintiq 13HD Pro Pen */ + case 0x180802: /* DTH2242 Grip Pen */ wacom->tool[idx] = BTN_TOOL_PEN; break; @@ -391,10 +393,13 @@ static int wacom_intuos_inout(struct wacom_wac *wacom) case 0x82b: /* Intuos3 Grip Pen Eraser */ case 0x81b: /* Intuos3 Classic Pen Eraser */ case 0x91b: /* Intuos3 Airbrush Eraser */ - case 0x80c: /* Intuos4 Marker Pen Eraser */ - case 0x80a: /* Intuos4 General Pen Eraser */ - case 0x4080a: /* Intuos4 Classic Pen Eraser */ - case 0x90a: /* Intuos4 Airbrush Eraser */ + case 0x80c: /* Intuos4/5 13HD/24HD Marker Pen Eraser */ + case 0x80a: /* Intuos4/5 13HD/24HD General Pen Eraser */ + case 0x90a: /* Intuos4/5 13HD/24HD Airbrush Eraser */ + case 0x14080a: /* Intuos4/5 13HD/24HD Classic Pen Eraser */ + case 0x10090a: /* Intuos4/5 13HD/24HD Airbrush Eraser */ + case 0x10080c: /* Intuos4/5 13HD/24HD Art Pen Eraser */ + case 0x16080a: /* Cintiq 13HD Pro Pen Eraser */ wacom->tool[idx] = BTN_TOOL_RUBBER; break; @@ -402,7 +407,8 @@ static int wacom_intuos_inout(struct wacom_wac *wacom) case 0x912: case 0x112: case 0x913: /* Intuos3 Airbrush */ - case 0x902: /* Intuos4 Airbrush */ + case 0x902: /* Intuos4/5 13HD/24HD Airbrush */ + case 0x100902: /* Intuos4/5 13HD/24HD Airbrush */ wacom->tool[idx] = BTN_TOOL_AIRBRUSH; break; @@ -533,10 +539,8 @@ static int wacom_intuos_irq(struct wacom_wac *wacom) input_report_key(input, BTN_8, (data[3] & 0x80)); } if (data[1] | (data[2] & 0x01) | data[3]) { - input_report_key(input, wacom->tool[1], 1); input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); } else { - input_report_key(input, wacom->tool[1], 0); input_report_abs(input, ABS_MISC, 0); } } else if (features->type == DTK) { @@ -600,10 +604,8 @@ static int wacom_intuos_irq(struct wacom_wac *wacom) } if (data[1] | data[2] | (data[3] & 0x1f) | data[4] | data[6] | data[8]) { - input_report_key(input, wacom->tool[1], 1); input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); } else { - input_report_key(input, wacom->tool[1], 0); input_report_abs(input, ABS_MISC, 0); } } else if (features->type >= INTUOS5S && features->type <= INTUOS5L) { @@ -628,10 +630,8 @@ static int wacom_intuos_irq(struct wacom_wac *wacom) } if (data[2] | (data[3] & 0x01) | data[4] | data[5]) { - input_report_key(input, wacom->tool[1], 1); input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); } else { - input_report_key(input, wacom->tool[1], 0); input_report_abs(input, ABS_MISC, 0); } } else { @@ -678,10 +678,8 @@ static int wacom_intuos_irq(struct wacom_wac *wacom) if ((data[5] & 0x1f) | data[6] | (data[1] & 0x1f) | data[2] | (data[3] & 0x1f) | data[4] | data[8] | (data[7] & 0x01)) { - input_report_key(input, wacom->tool[1], 1); input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); } else { - input_report_key(input, wacom->tool[1], 0); input_report_abs(input, ABS_MISC, 0); } } -- cgit v0.10.2 From e778f56e2fdf2302626f40f01b3ffa33e4fd18a4 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 30 Apr 2013 08:01:18 +0000 Subject: netfilter: nf_{log,queue}: fix compilation without CONFIG_PROC_FS This patch fixes the following compilation error: net/netfilter/nf_log.c:373:38: error: 'struct netns_nf' has no member named 'proc_netfilter' if procfs is not set. The netns support for nf_log, nfnetlink_log and nfnetlink_queue_core requires CONFIG_PROC_FS in the removal path of their respective /proc interface since net->nf.proc_netfilter is undefined in that case. Reported-by: Fengguang Wu Signed-off-by: Pablo Neira Ayuso Acked-by: Gao feng diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c index 388656d..757951d 100644 --- a/net/netfilter/nf_log.c +++ b/net/netfilter/nf_log.c @@ -368,17 +368,20 @@ static int __net_init nf_log_net_init(struct net *net) return 0; out_sysctl: +#ifdef CONFIG_PROC_FS /* For init_net: errors will trigger panic, don't unroll on error. */ if (!net_eq(net, &init_net)) remove_proc_entry("nf_log", net->nf.proc_netfilter); - +#endif return ret; } static void __net_exit nf_log_net_exit(struct net *net) { netfilter_log_sysctl_exit(net); +#ifdef CONFIG_PROC_FS remove_proc_entry("nf_log", net->nf.proc_netfilter); +#endif } static struct pernet_operations nf_log_net_ops = { diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c index faf1e93..d83d881 100644 --- a/net/netfilter/nfnetlink_log.c +++ b/net/netfilter/nfnetlink_log.c @@ -1045,7 +1045,9 @@ static int __net_init nfnl_log_net_init(struct net *net) static void __net_exit nfnl_log_net_exit(struct net *net) { +#ifdef CONFIG_PROC_FS remove_proc_entry("nfnetlink_log", net->nf.proc_netfilter); +#endif } static struct pernet_operations nfnl_log_net_ops = { diff --git a/net/netfilter/nfnetlink_queue_core.c b/net/netfilter/nfnetlink_queue_core.c index 2e0e835..4e27fa0 100644 --- a/net/netfilter/nfnetlink_queue_core.c +++ b/net/netfilter/nfnetlink_queue_core.c @@ -1285,7 +1285,9 @@ static int __net_init nfnl_queue_net_init(struct net *net) static void __net_exit nfnl_queue_net_exit(struct net *net) { +#ifdef CONFIG_PROC_FS remove_proc_entry("nfnetlink_queue", net->nf.proc_netfilter); +#endif } static struct pernet_operations nfnl_queue_net_ops = { -- cgit v0.10.2 From 42010ed0c669aeb1c5b015f5edf590c73919380c Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Mon, 6 May 2013 12:22:57 +0200 Subject: netfilter: update MAINTAINERS file * Remove reference to ipchains (not any longer in the tree) * Remove all P: (person) as this tag is obsolete according to the description. Therefore, update Jozsef Kadlecsik to M: so he can still show in the list of people. * Add URI to Netfilter's patchwork at ozlabs.org * Update URIs to Netfilter's git trees to point to kernel.org. Signed-off-by: Pablo Neira Ayuso diff --git a/MAINTAINERS b/MAINTAINERS index e1f5fac..32aad62 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5502,18 +5502,18 @@ F: Documentation/networking/s2io.txt F: Documentation/networking/vxge.txt F: drivers/net/ethernet/neterion/ -NETFILTER/IPTABLES/IPCHAINS -P: Harald Welte -P: Jozsef Kadlecsik +NETFILTER/IPTABLES M: Pablo Neira Ayuso M: Patrick McHardy +M: Jozsef Kadlecsik L: netfilter-devel@vger.kernel.org L: netfilter@vger.kernel.org L: coreteam@netfilter.org W: http://www.netfilter.org/ W: http://www.iptables.org/ -T: git git://1984.lsi.us.es/nf -T: git git://1984.lsi.us.es/nf-next +Q: http://patchwork.ozlabs.org/project/netfilter-devel/list/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next.git S: Supported F: include/linux/netfilter* F: include/linux/netfilter/ -- cgit v0.10.2 From 756b253167be36ea74980220d606662713431503 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Thu, 2 May 2013 19:56:12 +0100 Subject: ARM: 7711/1: dove: fix Dove cpu type from V7 to PJ4 The CPU used in Marvell Dove SoCs is a PJ4 Sheeva core. Using CONFIG_CPU_PJ4 instead of CONFIG_CPU_V7 will enable iWMMXt extensions on Dove. Signed-off-by: Sebastian Hesselbarth Acked-by: Jason Cooper Acked-by: Andrew Lunn Signed-off-by: Russell King diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b2d235d..7e3e2bf 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -492,7 +492,7 @@ config ARCH_IXP4XX config ARCH_DOVE bool "Marvell Dove" select ARCH_REQUIRE_GPIOLIB - select CPU_V7 + select CPU_PJ4 select GENERIC_CLOCKEVENTS select MIGHT_HAVE_PCI select PINCTRL -- cgit v0.10.2 From c01c5a506b59a8248b7666c779eb4ed689937874 Mon Sep 17 00:00:00 2001 From: Daniel Tang Date: Fri, 3 May 2013 08:13:55 +0100 Subject: ARM: 7712/1: Remove trailing whitespace in arch/arm/Makefile Clean up some trailing whitespace issues in arch/arm/Makefile. Signed-off-by: Daniel Tang Signed-off-by: Russell King diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 4737408..1ba358b 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -309,7 +309,7 @@ define archhelp echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)' echo '* xipImage - XIP kernel image, if configured (arch/$(ARCH)/boot/xipImage)' echo ' uImage - U-Boot wrapped zImage' - echo ' bootpImage - Combined zImage and initial RAM disk' + echo ' bootpImage - Combined zImage and initial RAM disk' echo ' (supply initrd image via make variable INITRD=)' echo '* dtbs - Build device tree blobs for enabled boards' echo ' install - Install uncompressed kernel' -- cgit v0.10.2 From 524eff183f51d080a83b348d0ea97c08b3607b9a Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Mon, 6 May 2013 18:27:17 +0200 Subject: perf: Fix EXIT event notification The perf_event_task_ctx() function needs to be called with preemption disabled, since it's checking for currently scheduled cpu against event cpu. We disable preemption for task related perf event context if there's one defined, leaving up to the chance which cpu it gets scheduled in. Signed-off-by: Jiri Olsa Acked-by: Peter Zijlstra Cc: Arnaldo Carvalho de Melo Cc: Namhyung Kim Cc: Corey Ashford Cc: Frederic Weisbecker Cc: Paul Mackerras Cc: Stephane Eranian Cc: Borislav Petkov Link: http://lkml.kernel.org/r/1367857638-27631-2-git-send-email-jolsa@redhat.com Signed-off-by: Ingo Molnar diff --git a/kernel/events/core.c b/kernel/events/core.c index 6b41c18..38b68a0 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -4474,7 +4474,7 @@ static void perf_event_task_ctx(struct perf_event_context *ctx, static void perf_event_task_event(struct perf_task_event *task_event) { struct perf_cpu_context *cpuctx; - struct perf_event_context *ctx; + struct perf_event_context *ctx, *task_ctx = task_event->task_ctx; struct pmu *pmu; int ctxn; @@ -4485,20 +4485,22 @@ static void perf_event_task_event(struct perf_task_event *task_event) goto next; perf_event_task_ctx(&cpuctx->ctx, task_event); - ctx = task_event->task_ctx; - if (!ctx) { - ctxn = pmu->task_ctx_nr; - if (ctxn < 0) - goto next; - ctx = rcu_dereference(current->perf_event_ctxp[ctxn]); - if (ctx) - perf_event_task_ctx(ctx, task_event); - } + if (task_ctx) + goto next; + ctxn = pmu->task_ctx_nr; + if (ctxn < 0) + goto next; + ctx = rcu_dereference(current->perf_event_ctxp[ctxn]); + if (ctx) + perf_event_task_ctx(ctx, task_event); next: put_cpu_ptr(pmu->pmu_cpu_context); } - if (task_event->task_ctx) - perf_event_task_ctx(task_event->task_ctx, task_event); + if (task_ctx) { + preempt_disable(); + perf_event_task_ctx(task_ctx, task_event); + preempt_enable(); + } rcu_read_unlock(); } -- cgit v0.10.2 From 52d857a8784a09576215c71cebf368d61c12a754 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Mon, 6 May 2013 18:27:18 +0200 Subject: perf: Factor out auxiliary events notification Add perf_event_aux() function to send out all types of auxiliary events - mmap, task, comm events. For each type there's match and output functions defined and used as callbacks during perf_event_aux processing. This way we can centralize the pmu/context iterating and event matching logic. Also since lot of the code was duplicated, this patch reduces the .text size about 2kB on my setup: snipped output from 'objdump -x kernel/events/core.o' before: Idx Name Size 0 .text 0000d313 after: Idx Name Size 0 .text 0000cad3 Signed-off-by: Jiri Olsa Acked-by: Peter Zijlstra Cc: Arnaldo Carvalho de Melo Cc: Namhyung Kim Cc: Corey Ashford Cc: Frederic Weisbecker Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Borislav Petkov Link: http://lkml.kernel.org/r/1367857638-27631-3-git-send-email-jolsa@redhat.com Signed-off-by: Ingo Molnar diff --git a/kernel/events/core.c b/kernel/events/core.c index 38b68a0..9dc297f 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -4394,6 +4394,64 @@ perf_event_read_event(struct perf_event *event, perf_output_end(&handle); } +typedef int (perf_event_aux_match_cb)(struct perf_event *event, void *data); +typedef void (perf_event_aux_output_cb)(struct perf_event *event, void *data); + +static void +perf_event_aux_ctx(struct perf_event_context *ctx, + perf_event_aux_match_cb match, + perf_event_aux_output_cb output, + void *data) +{ + struct perf_event *event; + + list_for_each_entry_rcu(event, &ctx->event_list, event_entry) { + if (event->state < PERF_EVENT_STATE_INACTIVE) + continue; + if (!event_filter_match(event)) + continue; + if (match(event, data)) + output(event, data); + } +} + +static void +perf_event_aux(perf_event_aux_match_cb match, + perf_event_aux_output_cb output, + void *data, + struct perf_event_context *task_ctx) +{ + struct perf_cpu_context *cpuctx; + struct perf_event_context *ctx; + struct pmu *pmu; + int ctxn; + + rcu_read_lock(); + list_for_each_entry_rcu(pmu, &pmus, entry) { + cpuctx = get_cpu_ptr(pmu->pmu_cpu_context); + if (cpuctx->unique_pmu != pmu) + goto next; + perf_event_aux_ctx(&cpuctx->ctx, match, output, data); + if (task_ctx) + goto next; + ctxn = pmu->task_ctx_nr; + if (ctxn < 0) + goto next; + ctx = rcu_dereference(current->perf_event_ctxp[ctxn]); + if (ctx) + perf_event_aux_ctx(ctx, match, output, data); +next: + put_cpu_ptr(pmu->pmu_cpu_context); + } + + if (task_ctx) { + preempt_disable(); + perf_event_aux_ctx(task_ctx, match, output, data); + preempt_enable(); + } + rcu_read_unlock(); +} + /* * task tracking -- fork/exit * @@ -4416,8 +4474,9 @@ struct perf_task_event { }; static void perf_event_task_output(struct perf_event *event, - struct perf_task_event *task_event) + void *data) { + struct perf_task_event *task_event = data; struct perf_output_handle handle; struct perf_sample_data sample; struct task_struct *task = task_event->task; @@ -4445,64 +4504,11 @@ out: task_event->event_id.header.size = size; } -static int perf_event_task_match(struct perf_event *event) -{ - if (event->state < PERF_EVENT_STATE_INACTIVE) - return 0; - - if (!event_filter_match(event)) - return 0; - - if (event->attr.comm || event->attr.mmap || - event->attr.mmap_data || event->attr.task) - return 1; - - return 0; -} - -static void perf_event_task_ctx(struct perf_event_context *ctx, - struct perf_task_event *task_event) -{ - struct perf_event *event; - - list_for_each_entry_rcu(event, &ctx->event_list, event_entry) { - if (perf_event_task_match(event)) - perf_event_task_output(event, task_event); - } -} - -static void perf_event_task_event(struct perf_task_event *task_event) +static int perf_event_task_match(struct perf_event *event, + void *data __maybe_unused) { - struct perf_cpu_context *cpuctx; - struct perf_event_context *ctx, *task_ctx = task_event->task_ctx; - struct pmu *pmu; - int ctxn; - - rcu_read_lock(); - list_for_each_entry_rcu(pmu, &pmus, entry) { - cpuctx = get_cpu_ptr(pmu->pmu_cpu_context); - if (cpuctx->unique_pmu != pmu) - goto next; - perf_event_task_ctx(&cpuctx->ctx, task_event); - - if (task_ctx) - goto next; - ctxn = pmu->task_ctx_nr; - if (ctxn < 0) - goto next; - ctx = rcu_dereference(current->perf_event_ctxp[ctxn]); - if (ctx) - perf_event_task_ctx(ctx, task_event); -next: - put_cpu_ptr(pmu->pmu_cpu_context); - } - if (task_ctx) { - preempt_disable(); - perf_event_task_ctx(task_ctx, task_event); - preempt_enable(); - } - - rcu_read_unlock(); + return event->attr.comm || event->attr.mmap || + event->attr.mmap_data || event->attr.task; } static void perf_event_task(struct task_struct *task, @@ -4533,7 +4539,10 @@ static void perf_event_task(struct task_struct *task, }, }; - perf_event_task_event(&task_event); + perf_event_aux(perf_event_task_match, + perf_event_task_output, + &task_event, + task_ctx); } void perf_event_fork(struct task_struct *task) @@ -4559,8 +4568,9 @@ struct perf_comm_event { }; static void perf_event_comm_output(struct perf_event *event, - struct perf_comm_event *comm_event) + void *data) { + struct perf_comm_event *comm_event = data; struct perf_output_handle handle; struct perf_sample_data sample; int size = comm_event->event_id.header.size; @@ -4587,39 +4597,16 @@ out: comm_event->event_id.header.size = size; } -static int perf_event_comm_match(struct perf_event *event) -{ - if (event->state < PERF_EVENT_STATE_INACTIVE) - return 0; - - if (!event_filter_match(event)) - return 0; - - if (event->attr.comm) - return 1; - - return 0; -} - -static void perf_event_comm_ctx(struct perf_event_context *ctx, - struct perf_comm_event *comm_event) +static int perf_event_comm_match(struct perf_event *event, + void *data __maybe_unused) { - struct perf_event *event; - - list_for_each_entry_rcu(event, &ctx->event_list, event_entry) { - if (perf_event_comm_match(event)) - perf_event_comm_output(event, comm_event); - } + return event->attr.comm; } static void perf_event_comm_event(struct perf_comm_event *comm_event) { - struct perf_cpu_context *cpuctx; - struct perf_event_context *ctx; char comm[TASK_COMM_LEN]; unsigned int size; - struct pmu *pmu; - int ctxn; memset(comm, 0, sizeof(comm)); strlcpy(comm, comm_event->task->comm, sizeof(comm)); @@ -4629,24 +4616,11 @@ static void perf_event_comm_event(struct perf_comm_event *comm_event) comm_event->comm_size = size; comm_event->event_id.header.size = sizeof(comm_event->event_id) + size; - rcu_read_lock(); - list_for_each_entry_rcu(pmu, &pmus, entry) { - cpuctx = get_cpu_ptr(pmu->pmu_cpu_context); - if (cpuctx->unique_pmu != pmu) - goto next; - perf_event_comm_ctx(&cpuctx->ctx, comm_event); - ctxn = pmu->task_ctx_nr; - if (ctxn < 0) - goto next; - - ctx = rcu_dereference(current->perf_event_ctxp[ctxn]); - if (ctx) - perf_event_comm_ctx(ctx, comm_event); -next: - put_cpu_ptr(pmu->pmu_cpu_context); - } - rcu_read_unlock(); + perf_event_aux(perf_event_comm_match, + perf_event_comm_output, + comm_event, + NULL); } void perf_event_comm(struct task_struct *task) @@ -4708,8 +4682,9 @@ struct perf_mmap_event { }; static void perf_event_mmap_output(struct perf_event *event, - struct perf_mmap_event *mmap_event) + void *data) { + struct perf_mmap_event *mmap_event = data; struct perf_output_handle handle; struct perf_sample_data sample; int size = mmap_event->event_id.header.size; @@ -4736,46 +4711,24 @@ out: } static int perf_event_mmap_match(struct perf_event *event, - struct perf_mmap_event *mmap_event, - int executable) + void *data) { - if (event->state < PERF_EVENT_STATE_INACTIVE) - return 0; - - if (!event_filter_match(event)) - return 0; - - if ((!executable && event->attr.mmap_data) || - (executable && event->attr.mmap)) - return 1; - - return 0; -} - -static void perf_event_mmap_ctx(struct perf_event_context *ctx, - struct perf_mmap_event *mmap_event, - int executable) -{ - struct perf_event *event; + struct perf_mmap_event *mmap_event = data; + struct vm_area_struct *vma = mmap_event->vma; + int executable = vma->vm_flags & VM_EXEC; - list_for_each_entry_rcu(event, &ctx->event_list, event_entry) { - if (perf_event_mmap_match(event, mmap_event, executable)) - perf_event_mmap_output(event, mmap_event); - } + return (!executable && event->attr.mmap_data) || + (executable && event->attr.mmap); } static void perf_event_mmap_event(struct perf_mmap_event *mmap_event) { - struct perf_cpu_context *cpuctx; - struct perf_event_context *ctx; struct vm_area_struct *vma = mmap_event->vma; struct file *file = vma->vm_file; unsigned int size; char tmp[16]; char *buf = NULL; const char *name; - struct pmu *pmu; - int ctxn; memset(tmp, 0, sizeof(tmp)); @@ -4831,27 +4784,10 @@ got_name: mmap_event->event_id.header.size = sizeof(mmap_event->event_id) + size; - rcu_read_lock(); - list_for_each_entry_rcu(pmu, &pmus, entry) { - cpuctx = get_cpu_ptr(pmu->pmu_cpu_context); - if (cpuctx->unique_pmu != pmu) - goto next; - perf_event_mmap_ctx(&cpuctx->ctx, mmap_event, - vma->vm_flags & VM_EXEC); - - ctxn = pmu->task_ctx_nr; - if (ctxn < 0) - goto next; - - ctx = rcu_dereference(current->perf_event_ctxp[ctxn]); - if (ctx) { - perf_event_mmap_ctx(ctx, mmap_event, - vma->vm_flags & VM_EXEC); - } -next: - put_cpu_ptr(pmu->pmu_cpu_context); - } - rcu_read_unlock(); + perf_event_aux(perf_event_mmap_match, + perf_event_mmap_output, + mmap_event, + NULL); kfree(buf); } -- cgit v0.10.2 From 9673217c71b433d62d56cfb56c487e31af6f5574 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sun, 5 May 2013 15:59:29 +0400 Subject: s390: remove non existent reference to GENERIC_KERNEL_THREAD Signed-off-by: Alexander Shiyan Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 2c9789d..da183c5 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -98,7 +98,6 @@ config S390 select CLONE_BACKWARDS2 select GENERIC_CLOCKEVENTS select GENERIC_CPU_DEVICES if !SMP - select GENERIC_KERNEL_THREAD select GENERIC_SMP_IDLE_THREAD select GENERIC_TIME_VSYSCALL_OLD select HAVE_ALIGNED_STRUCT_PAGE if SLUB -- cgit v0.10.2 From 7678dcfb310a190aea9bee8cdeb1e14987600737 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 6 May 2013 16:26:01 +0200 Subject: s390/disassembler: prevent endless loop in print_fn_code() If the size of the opcode to be printed is larger than "len" we'll see an overflow of an unsigned long value, which means that the while loop within print_fn_code() will loop quite a long time until there is the next chance for an exit. So add an early exit check. Reported-by: Christian Ehrhardt Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c index 7f4a4a8..be87d3e 100644 --- a/arch/s390/kernel/dis.c +++ b/arch/s390/kernel/dis.c @@ -1862,6 +1862,8 @@ void print_fn_code(unsigned char *code, unsigned long len) while (len) { ptr = buffer; opsize = insn_length(*code); + if (opsize > len) + break; ptr += sprintf(ptr, "%p: ", code); for (i = 0; i < opsize; i++) ptr += sprintf(ptr, "%02x", code[i]); -- cgit v0.10.2 From 617e164c35c94c936e3632b387d6dbb3d80c2c02 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Mon, 6 May 2013 21:44:36 +0200 Subject: s390: disable pfmf for clear page instruction Wit the introduction of large pages Linux also used pfmf for page clearing. The current implementation is not ideal, though: - currently we set usage intent=0, but cleared pages are often used directly after the clearing - z/VM does not yet provide EDAT - KVM does have to intercept PFMF even for resident pages Lets just the mvcl loop in all cases until we have a well defined pattern were pfmf is besser. Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h index 75ce9b0..5d64fb7 100644 --- a/arch/s390/include/asm/page.h +++ b/arch/s390/include/asm/page.h @@ -32,7 +32,7 @@ void storage_key_init_range(unsigned long start, unsigned long end); -static unsigned long pfmf(unsigned long function, unsigned long address) +static inline unsigned long pfmf(unsigned long function, unsigned long address) { asm volatile( " .insn rre,0xb9af0000,%[function],%[address]" @@ -44,17 +44,13 @@ static unsigned long pfmf(unsigned long function, unsigned long address) static inline void clear_page(void *page) { - if (MACHINE_HAS_PFMF) { - pfmf(0x10000, (unsigned long)page); - } else { - register unsigned long reg1 asm ("1") = 0; - register void *reg2 asm ("2") = page; - register unsigned long reg3 asm ("3") = 4096; - asm volatile( - " mvcl 2,0" - : "+d" (reg2), "+d" (reg3) : "d" (reg1) - : "memory", "cc"); - } + register unsigned long reg1 asm ("1") = 0; + register void *reg2 asm ("2") = page; + register unsigned long reg3 asm ("3") = 4096; + asm volatile( + " mvcl 2,0" + : "+d" (reg2), "+d" (reg3) : "d" (reg1) + : "memory", "cc"); } static inline void copy_page(void *to, void *from) -- cgit v0.10.2 From cd5de26288604cb8a6f7fba041cc5fb610cbff9e Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 1 Apr 2013 18:04:21 -0300 Subject: [media] pwc: Fix comment wrt lock ordering With all the changes to handle the locking in the v4l2-core rather then at the driver level, the order in which the 2 pwc locks need to be taken has changed, update the comment in the header file to correctly reflect this. Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/usb/pwc/pwc.h b/drivers/media/usb/pwc/pwc.h index 7a6a0d3..81b017a 100644 --- a/drivers/media/usb/pwc/pwc.h +++ b/drivers/media/usb/pwc/pwc.h @@ -226,7 +226,7 @@ struct pwc_device struct list_head queued_bufs; spinlock_t queued_bufs_lock; /* Protects queued_bufs */ - /* Note if taking both locks v4l2_lock must always be locked first! */ + /* If taking both locks vb_queue_lock must always be locked first! */ struct mutex v4l2_lock; /* Protects everything else */ struct mutex vb_queue_lock; /* Protects vb_queue and capt_file */ -- cgit v0.10.2 From 0391dc17bd5d7d6b1706d0be6472c4b352b57c05 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 29 Apr 2013 08:54:14 -0300 Subject: [media] gspca-sonixb: Adjust hstart on sn9c103 + pas202 For some unknown reason we need to increase hstart by 1 on when using the PAS202 on the sn9c103 (versus on the sn9c102), otherwise we get the wrong colors, due to shifting of the bayer pattern. Reported-by: Patrizio Bassi Tested-by: Patrizio Bassi Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/usb/gspca/sonixb.c b/drivers/media/usb/gspca/sonixb.c index 3fe207e..d7ff3b9 100644 --- a/drivers/media/usb/gspca/sonixb.c +++ b/drivers/media/usb/gspca/sonixb.c @@ -1159,6 +1159,13 @@ static int sd_start(struct gspca_dev *gspca_dev) regs[0x01] = 0x44; /* Select 24 Mhz clock */ regs[0x12] = 0x02; /* Set hstart to 2 */ } + break; + case SENSOR_PAS202: + /* For some unknown reason we need to increase hstart by 1 on + the sn9c103, otherwise we get wrong colors (bayer shift). */ + if (sd->bridge == BRIDGE_103) + regs[0x12] += 1; + break; } /* Disable compression when the raw bayer format has been selected */ if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_RAW) -- cgit v0.10.2 From 2e0192f13c4428bb624838a9cc6713b6237bab3b Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 7 May 2013 19:38:52 +0800 Subject: ASoC: wm0010: fix error return code in wm0010_boot() Fix to return -ENOMEM in the memory malloc of 'out' and 'img_swap' error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/wm0010.c b/sound/soc/codecs/wm0010.c index ad2fee4..fe5e10f 100644 --- a/sound/soc/codecs/wm0010.c +++ b/sound/soc/codecs/wm0010.c @@ -667,6 +667,7 @@ static int wm0010_boot(struct snd_soc_codec *codec) /* On wm0010 only the CLKCTRL1 value is used */ pll_rec.clkctrl1 = wm0010->pll_clkctrl1; + ret = -ENOMEM; len = pll_rec.length + 8; out = kzalloc(len, GFP_KERNEL); if (!out) { -- cgit v0.10.2 From 97a5b81fa4d3a11dcdf224befc577f2e0abadc0b Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 2 May 2013 16:21:15 +0200 Subject: x86: Fix idle consolidation fallout The core code expects the arch idle code to return with interrupts enabled. The conversion missed two x86 cases which fail to do that. Reported-and-tested-by: Markus Trippelsdorf Tested-by: Borislav Petkov Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1305021557030.3972@ionos Signed-off-by: Thomas Gleixner diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 607af0d..4e7a37f 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -312,6 +312,8 @@ void arch_cpu_idle(void) { if (cpuidle_idle_call()) x86_idle(); + else + local_irq_enable(); } /* @@ -368,9 +370,6 @@ void amd_e400_remove_cpu(int cpu) */ static void amd_e400_idle(void) { - if (need_resched()) - return; - if (!amd_e400_c1e_detected) { u32 lo, hi; -- cgit v0.10.2 From c4ae25ecdf93132fb69b37d8121a86046615b53b Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Wed, 1 May 2013 11:00:34 -0700 Subject: Revert "drm/i915: Calculate correct stolen size for GEN7+" This reverts commit 03752f5b7b77b95d83479885040950fba1250850. This revert requires a bit of explanation on how I understand things work. Internally the architects/designers decide how the stolen encoding works. We put it in a doc. BIOS writers take these docs and implement it. Driver writers read the doc too, and read the value left by the BIOS writers, and then we make magic. The failing here is that in the docs we had[1] contained two different definitions for this register for Gen7. (We have both a PCI register, and an MMIO, and each of these were different). At the time [2] of 03752f5, we asked the architects what the correct value should be; but that doesn't match the reality (BIOS) unfortunately. So on all machines I can get my hands on, this revert is the right thing to do. I've also worked with the product group to confirm that they agree this revert is what we should do. People using HW made my "people" who both write their own BIOS, and have access to our docs (Apple?). Investigations are still ongoing about whether we need to add a list of machines needing special handling, but this patch should be the right thing for pretty much everyone. [1] The docs are still wrong on this one. Now instead of two registers with two definitions, we have one register with BOTH definitions, progress? [2] The open source PRMs have the "wrong" definitions in chapter Volume 1 part6, section 1.1.12. This digging was inspired by Paulo. Cc: Paulo Zanoni Signed-off-by: Ben Widawsky Acked-by: Jesse Barnes [danvet: Augment the patch saying that it's still a bit unclear whether there are any machines out there with "wrong" firmware and whether we need to add a list to handle them specially.] Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index dca614d..bdb0d77 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -709,15 +709,6 @@ static inline size_t gen6_get_stolen_size(u16 snb_gmch_ctl) return snb_gmch_ctl << 25; /* 32 MB units */ } -static inline size_t gen7_get_stolen_size(u16 snb_gmch_ctl) -{ - static const int stolen_decoder[] = { - 0, 0, 0, 0, 0, 32, 48, 64, 128, 256, 96, 160, 224, 352}; - snb_gmch_ctl >>= IVB_GMCH_GMS_SHIFT; - snb_gmch_ctl &= IVB_GMCH_GMS_MASK; - return stolen_decoder[snb_gmch_ctl] << 20; -} - static int gen6_gmch_probe(struct drm_device *dev, size_t *gtt_total, size_t *stolen, @@ -747,11 +738,7 @@ static int gen6_gmch_probe(struct drm_device *dev, pci_read_config_word(dev->pdev, SNB_GMCH_CTRL, &snb_gmch_ctl); gtt_size = gen6_get_total_gtt_size(snb_gmch_ctl); - if (IS_GEN7(dev) && !IS_VALLEYVIEW(dev)) - *stolen = gen7_get_stolen_size(snb_gmch_ctl); - else - *stolen = gen6_get_stolen_size(snb_gmch_ctl); - + *stolen = gen6_get_stolen_size(snb_gmch_ctl); *gtt_total = (gtt_size / sizeof(gen6_gtt_pte_t)) << PAGE_SHIFT; /* For Modern GENs the PTEs and register space are split in the BAR */ diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 83f9c26..2d6b62e 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -46,8 +46,6 @@ #define SNB_GMCH_GGMS_MASK 0x3 #define SNB_GMCH_GMS_SHIFT 3 /* Graphics Mode Select */ #define SNB_GMCH_GMS_MASK 0x1f -#define IVB_GMCH_GMS_SHIFT 4 -#define IVB_GMCH_GMS_MASK 0xf /* PCI config space */ -- cgit v0.10.2 From 1ffc5289bfcf7f4c4e4213240bb4be68c48ce603 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Tue, 7 May 2013 18:54:05 +0300 Subject: drm/i915: clear the stolen fb before resuming Similar to commit 88afe715dd5469bc24ca7a19ac62dd3c241cab48 Author: Chris Wilson Date: Sun Dec 16 12:15:41 2012 +0000 drm/i915: Clear the stolen fb before enabling but on the resume path. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=57191 Reported-and-tested-by: Nikolay Amiantov Signed-off-by: Jani Nikula Reviewed-by: Chris Wilson Cc: stable@vger.kernel.org (3.9 only) Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index 0e19e57..6b7c3ca 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -262,10 +262,22 @@ void intel_fbdev_fini(struct drm_device *dev) void intel_fbdev_set_suspend(struct drm_device *dev, int state) { drm_i915_private_t *dev_priv = dev->dev_private; - if (!dev_priv->fbdev) + struct intel_fbdev *ifbdev = dev_priv->fbdev; + struct fb_info *info; + + if (!ifbdev) return; - fb_set_suspend(dev_priv->fbdev->helper.fbdev, state); + info = ifbdev->helper.fbdev; + + /* On resume from hibernation: If the object is shmemfs backed, it has + * been restored from swap. If the object is stolen however, it will be + * full of whatever garbage was left in there. + */ + if (!state && ifbdev->ifb.obj->stolen) + memset_io(info->screen_base, 0, info->screen_size); + + fb_set_suspend(info, state); } MODULE_LICENSE("GPL and additional rights"); -- cgit v0.10.2 From 30650239adc9e4e9439256d6988e521518dccbb3 Mon Sep 17 00:00:00 2001 From: Alistair Popple Date: Mon, 29 Apr 2013 18:07:47 +0000 Subject: powerpc: Add an in memory udbg console This patch adds a new udbg early debug console which utilises statically defined input and output buffers stored within the kernel BSS. It is primarily designed to assist with bring up of new hardware which may not have a working console but which has a method of reading/writing kernel memory. This version incorporates comments made by Ben H (thanks!). Changes from v1: - Add memory barriers. - Ensure updating of read/write positions is atomic. Signed-off-by: Alistair Popple Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index 5416e28..863d877 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -262,8 +262,31 @@ config PPC_EARLY_DEBUG_OPAL_HVSI Select this to enable early debugging for the PowerNV platform using an "hvsi" console +config PPC_EARLY_DEBUG_MEMCONS + bool "In memory console" + help + Select this to enable early debugging using an in memory console. + This console provides input and output buffers stored within the + kernel BSS and should be safe to select on any system. A debugger + can then be used to read kernel output or send input to the console. endchoice +config PPC_MEMCONS_OUTPUT_SIZE + int "In memory console output buffer size" + depends on PPC_EARLY_DEBUG_MEMCONS + default 4096 + help + Selects the size of the output buffer (in bytes) of the in memory + console. + +config PPC_MEMCONS_INPUT_SIZE + int "In memory console input buffer size" + depends on PPC_EARLY_DEBUG_MEMCONS + default 128 + help + Selects the size of the input buffer (in bytes) of the in memory + console. + config PPC_EARLY_DEBUG_OPAL def_bool y depends on PPC_EARLY_DEBUG_OPAL_RAW || PPC_EARLY_DEBUG_OPAL_HVSI diff --git a/arch/powerpc/include/asm/udbg.h b/arch/powerpc/include/asm/udbg.h index 5a7510e..dc59091 100644 --- a/arch/powerpc/include/asm/udbg.h +++ b/arch/powerpc/include/asm/udbg.h @@ -52,6 +52,7 @@ extern void __init udbg_init_40x_realmode(void); extern void __init udbg_init_cpm(void); extern void __init udbg_init_usbgecko(void); extern void __init udbg_init_wsp(void); +extern void __init udbg_init_memcons(void); extern void __init udbg_init_ehv_bc(void); extern void __init udbg_init_ps3gelic(void); extern void __init udbg_init_debug_opal_raw(void); diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index 13b8670..9d3fdcd 100644 --- a/arch/powerpc/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -64,6 +64,9 @@ void __init udbg_early_init(void) udbg_init_usbgecko(); #elif defined(CONFIG_PPC_EARLY_DEBUG_WSP) udbg_init_wsp(); +#elif defined(CONFIG_PPC_EARLY_DEBUG_MEMCONS) + /* In memory console */ + udbg_init_memcons(); #elif defined(CONFIG_PPC_EARLY_DEBUG_EHV_BC) udbg_init_ehv_bc(); #elif defined(CONFIG_PPC_EARLY_DEBUG_PS3GELIC) diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index b0a518e..99464a7 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -64,6 +64,8 @@ endif obj-$(CONFIG_PPC_SCOM) += scom.o +obj-$(CONFIG_PPC_EARLY_DEBUG_MEMCONS) += udbg_memcons.o + subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror obj-$(CONFIG_PPC_XICS) += xics/ diff --git a/arch/powerpc/sysdev/udbg_memcons.c b/arch/powerpc/sysdev/udbg_memcons.c new file mode 100644 index 0000000..ce5a7b4 --- /dev/null +++ b/arch/powerpc/sysdev/udbg_memcons.c @@ -0,0 +1,105 @@ +/* + * A udbg backend which logs messages and reads input from in memory + * buffers. + * + * The console output can be read from memcons_output which is a + * circular buffer whose next write position is stored in memcons.output_pos. + * + * Input may be passed by writing into the memcons_input buffer when it is + * empty. The input buffer is empty when both input_pos == input_start and + * *input_start == '\0'. + * + * Copyright (C) 2003-2005 Anton Blanchard and Milton Miller, IBM Corp + * Copyright (C) 2013 Alistair Popple, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include + +struct memcons { + char *output_start; + char *output_pos; + char *output_end; + char *input_start; + char *input_pos; + char *input_end; +}; + +static char memcons_output[CONFIG_PPC_MEMCONS_OUTPUT_SIZE]; +static char memcons_input[CONFIG_PPC_MEMCONS_INPUT_SIZE]; + +struct memcons memcons = { + .output_start = memcons_output, + .output_pos = memcons_output, + .output_end = &memcons_output[CONFIG_PPC_MEMCONS_OUTPUT_SIZE], + .input_start = memcons_input, + .input_pos = memcons_input, + .input_end = &memcons_input[CONFIG_PPC_MEMCONS_INPUT_SIZE], +}; + +void memcons_putc(char c) +{ + char *new_output_pos; + + *memcons.output_pos = c; + wmb(); + new_output_pos = memcons.output_pos + 1; + if (new_output_pos >= memcons.output_end) + new_output_pos = memcons.output_start; + + memcons.output_pos = new_output_pos; +} + +int memcons_getc_poll(void) +{ + char c; + char *new_input_pos; + + if (*memcons.input_pos) { + c = *memcons.input_pos; + + new_input_pos = memcons.input_pos + 1; + if (new_input_pos >= memcons.input_end) + new_input_pos = memcons.input_start; + else if (*new_input_pos == '\0') + new_input_pos = memcons.input_start; + + *memcons.input_pos = '\0'; + wmb(); + memcons.input_pos = new_input_pos; + return c; + } + + return -1; +} + +int memcons_getc(void) +{ + int c; + + while (1) { + c = memcons_getc_poll(); + if (c == -1) + cpu_relax(); + else + break; + } + + return c; +} + +void udbg_init_memcons(void) +{ + udbg_putc = memcons_putc; + udbg_getc = memcons_getc; + udbg_getc_poll = memcons_getc_poll; +} -- cgit v0.10.2 From 3eccfdb01da58fbd0f789ae6ca61cee3769e26de Mon Sep 17 00:00:00 2001 From: Shlomo Pongratz Date: Sun, 5 May 2013 17:36:26 +0300 Subject: iscsi-target: Fix processing of OOO commands Fix two issues in OOO commands processing done at iscsit_attach_ooo_cmdsn. Handle command serial numbers wrap around by using iscsi_sna_lt and not regular comparisson. The routine iterates until it finds an entry whose serial number is greater than the serial number of the new one, thus the new entry should be inserted before that entry and not after. Signed-off-by: Shlomo Pongratz Cc: Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/iscsi/iscsi_target_erl1.c b/drivers/target/iscsi/iscsi_target_erl1.c index 7816af6..40d9dbc 100644 --- a/drivers/target/iscsi/iscsi_target_erl1.c +++ b/drivers/target/iscsi/iscsi_target_erl1.c @@ -823,7 +823,7 @@ static int iscsit_attach_ooo_cmdsn( /* * CmdSN is greater than the tail of the list. */ - if (ooo_tail->cmdsn < ooo_cmdsn->cmdsn) + if (iscsi_sna_lt(ooo_tail->cmdsn, ooo_cmdsn->cmdsn)) list_add_tail(&ooo_cmdsn->ooo_list, &sess->sess_ooo_cmdsn_list); else { @@ -833,11 +833,12 @@ static int iscsit_attach_ooo_cmdsn( */ list_for_each_entry(ooo_tmp, &sess->sess_ooo_cmdsn_list, ooo_list) { - if (ooo_tmp->cmdsn < ooo_cmdsn->cmdsn) + if (iscsi_sna_lt(ooo_tmp->cmdsn, ooo_cmdsn->cmdsn)) continue; + /* Insert before this entry */ list_add(&ooo_cmdsn->ooo_list, - &ooo_tmp->ooo_list); + ooo_tmp->ooo_list.prev); break; } } -- cgit v0.10.2 From f558a845c3a043d032bb247cdbe50db9202476a1 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Fri, 3 May 2013 16:40:09 -0400 Subject: Add missing module license tag to vring helpers. [ 624.286653] vringh: module license 'unspecified' taints kernel. Signed-off-by: Dave Jones Signed-off-by: Rusty Russell diff --git a/drivers/vhost/vringh.c b/drivers/vhost/vringh.c index bff0775..5174eba 100644 --- a/drivers/vhost/vringh.c +++ b/drivers/vhost/vringh.c @@ -3,6 +3,7 @@ * * Since these may be in userspace, we use (inline) accessors. */ +#include #include #include #include @@ -1005,3 +1006,5 @@ int vringh_need_notify_kern(struct vringh *vrh) return __vringh_need_notify(vrh, getu16_kern); } EXPORT_SYMBOL(vringh_need_notify_kern); + +MODULE_LICENSE("GPL"); -- cgit v0.10.2 From f616fe4feee4000c2995d2d1e1981513bf9ab0d4 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Wed, 8 May 2013 10:06:55 +0930 Subject: lguest: clear cached last cpu when guest_set_pgd() called. commit v3.9-rc1-53-g6d0cda9 "lguest: cache last cpu we ran on." missed one case, which causes a triple fault. The guest calls guest_set_pgd() on the top page, and we carefully remap the Switcher text page. But we didn't reset last_host_cpu, so map_switcher_in_guest() thinks the guest's regs and IDT/GDT etc are already mapped. Reported-by: Paul Bolle Tested-by: Paul Bolle Signed-off-by: Rusty Russell diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c index 699187a..5b9ac32 100644 --- a/drivers/lguest/page_tables.c +++ b/drivers/lguest/page_tables.c @@ -1002,6 +1002,7 @@ void guest_set_pgd(struct lguest *lg, unsigned long gpgdir, u32 idx) kill_guest(&lg->cpus[0], "Cannot populate switcher mapping"); } + lg->pgdirs[pgdir].last_host_cpu = -1; } } -- cgit v0.10.2 From 1de1455f33709a8afd8d41d26d09739a1148105b Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 8 May 2013 14:14:26 +1000 Subject: powerpc/powernv: Properly drop characters if console is closed If the firmware returns an error such as "closed" (or hardware error), we should drop characters. Currently we only do that when a firmware compatible with OPAL v2 APIs is detected, in the code that calls opal_console_write_buffer_space(), which didn't exist with OPAL v1 (or didn't work). However, when enabling early debug consoles, the flag indicating that v2 is supported isn't set yet, causing us, in case of errors or closed console, to spin forever. Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c index ade4463..12d9846 100644 --- a/arch/powerpc/platforms/powernv/opal.c +++ b/arch/powerpc/platforms/powernv/opal.c @@ -144,6 +144,13 @@ int opal_put_chars(uint32_t vtermno, const char *data, int total_len) rc == OPAL_BUSY_EVENT || rc == OPAL_SUCCESS)) { len = total_len; rc = opal_console_write(vtermno, &len, data); + + /* Closed or other error drop */ + if (rc != OPAL_SUCCESS && rc != OPAL_BUSY && + rc != OPAL_BUSY_EVENT) { + written = total_len; + break; + } if (rc == OPAL_SUCCESS) { total_len -= len; data += len; -- cgit v0.10.2 From 2371e9cf14074c7d2542da56c5d6161fbe29a946 Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Wed, 8 May 2013 09:14:20 +0200 Subject: ASoC: ux500: Swap even/odd AD slot definitions AD slots definitions for ab8500 codec were erroneously swapped between even and odd channels. Fix this by swapping the definitions to be coherent with the channel number. Signed-off-by: Fabio Baltieri Acked-by: Lee Jones Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/ab8500-codec.h b/sound/soc/codecs/ab8500-codec.h index 114f69a..306d0bc 100644 --- a/sound/soc/codecs/ab8500-codec.h +++ b/sound/soc/codecs/ab8500-codec.h @@ -348,25 +348,25 @@ /* AB8500_ADSLOTSELX */ #define AB8500_ADSLOTSELX_AD_OUT1_TO_SLOT_ODD 0x00 -#define AB8500_ADSLOTSELX_AD_OUT2_TO_SLOT_ODD 0x01 -#define AB8500_ADSLOTSELX_AD_OUT3_TO_SLOT_ODD 0x02 -#define AB8500_ADSLOTSELX_AD_OUT4_TO_SLOT_ODD 0x03 -#define AB8500_ADSLOTSELX_AD_OUT5_TO_SLOT_ODD 0x04 -#define AB8500_ADSLOTSELX_AD_OUT6_TO_SLOT_ODD 0x05 -#define AB8500_ADSLOTSELX_AD_OUT7_TO_SLOT_ODD 0x06 -#define AB8500_ADSLOTSELX_AD_OUT8_TO_SLOT_ODD 0x07 -#define AB8500_ADSLOTSELX_ZEROES_TO_SLOT_ODD 0x08 -#define AB8500_ADSLOTSELX_TRISTATE_TO_SLOT_ODD 0x0F +#define AB8500_ADSLOTSELX_AD_OUT2_TO_SLOT_ODD 0x10 +#define AB8500_ADSLOTSELX_AD_OUT3_TO_SLOT_ODD 0x20 +#define AB8500_ADSLOTSELX_AD_OUT4_TO_SLOT_ODD 0x30 +#define AB8500_ADSLOTSELX_AD_OUT5_TO_SLOT_ODD 0x40 +#define AB8500_ADSLOTSELX_AD_OUT6_TO_SLOT_ODD 0x50 +#define AB8500_ADSLOTSELX_AD_OUT7_TO_SLOT_ODD 0x60 +#define AB8500_ADSLOTSELX_AD_OUT8_TO_SLOT_ODD 0x70 +#define AB8500_ADSLOTSELX_ZEROES_TO_SLOT_ODD 0x80 +#define AB8500_ADSLOTSELX_TRISTATE_TO_SLOT_ODD 0xF0 #define AB8500_ADSLOTSELX_AD_OUT1_TO_SLOT_EVEN 0x00 -#define AB8500_ADSLOTSELX_AD_OUT2_TO_SLOT_EVEN 0x10 -#define AB8500_ADSLOTSELX_AD_OUT3_TO_SLOT_EVEN 0x20 -#define AB8500_ADSLOTSELX_AD_OUT4_TO_SLOT_EVEN 0x30 -#define AB8500_ADSLOTSELX_AD_OUT5_TO_SLOT_EVEN 0x40 -#define AB8500_ADSLOTSELX_AD_OUT6_TO_SLOT_EVEN 0x50 -#define AB8500_ADSLOTSELX_AD_OUT7_TO_SLOT_EVEN 0x60 -#define AB8500_ADSLOTSELX_AD_OUT8_TO_SLOT_EVEN 0x70 -#define AB8500_ADSLOTSELX_ZEROES_TO_SLOT_EVEN 0x80 -#define AB8500_ADSLOTSELX_TRISTATE_TO_SLOT_EVEN 0xF0 +#define AB8500_ADSLOTSELX_AD_OUT2_TO_SLOT_EVEN 0x01 +#define AB8500_ADSLOTSELX_AD_OUT3_TO_SLOT_EVEN 0x02 +#define AB8500_ADSLOTSELX_AD_OUT4_TO_SLOT_EVEN 0x03 +#define AB8500_ADSLOTSELX_AD_OUT5_TO_SLOT_EVEN 0x04 +#define AB8500_ADSLOTSELX_AD_OUT6_TO_SLOT_EVEN 0x05 +#define AB8500_ADSLOTSELX_AD_OUT7_TO_SLOT_EVEN 0x06 +#define AB8500_ADSLOTSELX_AD_OUT8_TO_SLOT_EVEN 0x07 +#define AB8500_ADSLOTSELX_ZEROES_TO_SLOT_EVEN 0x08 +#define AB8500_ADSLOTSELX_TRISTATE_TO_SLOT_EVEN 0x0F #define AB8500_ADSLOTSELX_EVEN_SHIFT 0 #define AB8500_ADSLOTSELX_ODD_SHIFT 4 -- cgit v0.10.2 From 49ece554288caf1a8ea9e546ab1ff5bc4b175456 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 08:37:00 -0500 Subject: rbd: fix leak of format 2 snapshot context When rbd_dev_v2_refresh() is called, the rbd device already has a snapshot context associated with it. But that never gets freed, the pointer just gets overwritten. Fix this by dropping the rbd device's reference to the snapshot context before overwriting the pointer. Because ceph_put_snap_context() already handles for a null pointer we don't need to check for that (for the probe case, where no context has yet been assigned). This resolves: http://tracker.ceph.com/issues/4912 Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index c2ca181..4263743 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -4004,6 +4004,7 @@ static int rbd_dev_v2_snap_context(struct rbd_device *rbd_dev) for (i = 0; i < snap_count; i++) snapc->snaps[i] = ceph_decode_64(&p); + ceph_put_snap_context(rbd_dev->header.snapc); rbd_dev->header.snapc = snapc; dout(" snap context seq = %llu, snap_count = %u\n", -- cgit v0.10.2 From e627db085e0dab7744b68f3c927be6ed6df2f7f9 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 07:40:30 -0500 Subject: rbd: revalidate only for mapping size changes This commit: d98df63e rbd: revalidate_disk upon rbd resize instituted a call to revalidate_disk() to notify interested parties that a mapped image has changed size. This works well, as long as the the rbd device doesn't map a snapshot. A snapshot will never change size. However, the base image the snapshot is associated with can, and it can do so while the snapshot is mapped. The problem is that the test for the size is looking at the size of the base image, not the size of the mapped snapshot. This patch corrects that. Update the warning message shown in the event of error, and move it into the callers. This resolves: http://tracker.ceph.com/issues/4911 Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 4263743..5d5e3f0 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -2628,6 +2628,7 @@ out: static void rbd_watch_cb(u64 ver, u64 notify_id, u8 opcode, void *data) { struct rbd_device *rbd_dev = (struct rbd_device *)data; + int ret; if (!rbd_dev) return; @@ -2635,7 +2636,9 @@ static void rbd_watch_cb(u64 ver, u64 notify_id, u8 opcode, void *data) dout("%s: \"%s\" notify_id %llu opcode %u\n", __func__, rbd_dev->header_name, (unsigned long long)notify_id, (unsigned int)opcode); - (void)rbd_dev_refresh(rbd_dev); + ret = rbd_dev_refresh(rbd_dev); + if (ret) + rbd_warn(rbd_dev, ": header refresh error (%d)\n", ret); rbd_obj_notify_ack(rbd_dev, notify_id); } @@ -3182,11 +3185,11 @@ static void rbd_exists_validate(struct rbd_device *rbd_dev) static int rbd_dev_refresh(struct rbd_device *rbd_dev) { - u64 image_size; + u64 mapping_size; int ret; rbd_assert(rbd_image_format_valid(rbd_dev->image_format)); - image_size = rbd_dev->header.image_size; + mapping_size = rbd_dev->mapping.size; mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); if (rbd_dev->image_format == 1) ret = rbd_dev_v1_refresh(rbd_dev); @@ -3197,10 +3200,7 @@ static int rbd_dev_refresh(struct rbd_device *rbd_dev) rbd_exists_validate(rbd_dev); mutex_unlock(&ctl_mutex); - if (ret) - rbd_warn(rbd_dev, "got notification but failed to " - " update snaps: %d\n", ret); - if (image_size != rbd_dev->header.image_size) + if (mapping_size != rbd_dev->mapping.size) revalidate_disk(rbd_dev->disk); return ret; @@ -3405,6 +3405,8 @@ static ssize_t rbd_image_refresh(struct device *dev, int ret; ret = rbd_dev_refresh(rbd_dev); + if (ret) + rbd_warn(rbd_dev, ": manual header refresh error (%d)\n", ret); return ret < 0 ? ret : size; } -- cgit v0.10.2 From 3d75095a533aa3bbad652369ffde4c129781b8ec Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Wed, 8 May 2013 16:35:10 +0530 Subject: regulator: dbx500: Make local symbol static power_state_active_get is used only in this file. Make it static. While at it also move this function definition inside the CONFIG_REGULATOR_DEBUG macro as it is called only from within it. This also avoids further build warning related to unused definition. Signed-off-by: Sachin Kamat Signed-off-by: Mark Brown diff --git a/drivers/regulator/dbx500-prcmu.c b/drivers/regulator/dbx500-prcmu.c index 89bd2fa..ce89f78 100644 --- a/drivers/regulator/dbx500-prcmu.c +++ b/drivers/regulator/dbx500-prcmu.c @@ -24,18 +24,6 @@ static int power_state_active_cnt; /* will initialize to zero */ static DEFINE_SPINLOCK(power_state_active_lock); -int power_state_active_get(void) -{ - unsigned long flags; - int cnt; - - spin_lock_irqsave(&power_state_active_lock, flags); - cnt = power_state_active_cnt; - spin_unlock_irqrestore(&power_state_active_lock, flags); - - return cnt; -} - void power_state_active_enable(void) { unsigned long flags; @@ -65,6 +53,18 @@ out: #ifdef CONFIG_REGULATOR_DEBUG +static int power_state_active_get(void) +{ + unsigned long flags; + int cnt; + + spin_lock_irqsave(&power_state_active_lock, flags); + cnt = power_state_active_cnt; + spin_unlock_irqrestore(&power_state_active_lock, flags); + + return cnt; +} + static struct ux500_regulator_debug { struct dentry *dir; struct dentry *status_file; -- cgit v0.10.2 From 00a653e216a8427547774ab3f2cc92709c3e28c9 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 07:40:30 -0500 Subject: rbd: update capacity in rbd_dev_refresh() When a mapped image changes size, we change the capacity recorded for the Linux disk associated with it, in rbd_update_mapping_size(). That function is called in two places--the format 1 and format 2 refresh routines. There is no need to set the capacity while holding the header semaphore. Instead, do it in the common rbd_dev_refresh(), using the logic that's already there to initiate disk revalidation. Add handling in the request function, just in case a request that exceeds the capacity of the device comes in (perhaps one that was started before a refresh shrunk the device). Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 5d5e3f0..9c094c6 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -2874,6 +2874,13 @@ static void rbd_request_fn(struct request_queue *q) goto end_request; /* Shouldn't happen */ } + result = -EIO; + if (offset + length > rbd_dev->mapping.size) { + rbd_warn(rbd_dev, "beyond EOD (%llu~%llu > %llu)\n", + offset, length, rbd_dev->mapping.size); + goto end_request; + } + result = -ENOMEM; img_request = rbd_img_request_create(rbd_dev, offset, length, write_request, false); @@ -3116,14 +3123,8 @@ static void rbd_update_mapping_size(struct rbd_device *rbd_dev) if (rbd_dev->spec->snap_id != CEPH_NOSNAP) return; - if (rbd_dev->mapping.size != rbd_dev->header.image_size) { - sector_t size; - + if (rbd_dev->mapping.size != rbd_dev->header.image_size) rbd_dev->mapping.size = rbd_dev->header.image_size; - size = (sector_t)rbd_dev->mapping.size / SECTOR_SIZE; - dout("setting size to %llu sectors", (unsigned long long)size); - set_capacity(rbd_dev->disk, size); - } } /* @@ -3200,8 +3201,14 @@ static int rbd_dev_refresh(struct rbd_device *rbd_dev) rbd_exists_validate(rbd_dev); mutex_unlock(&ctl_mutex); - if (mapping_size != rbd_dev->mapping.size) + if (mapping_size != rbd_dev->mapping.size) { + sector_t size; + + size = (sector_t)rbd_dev->mapping.size / SECTOR_SIZE; + dout("setting size to %llu sectors", (unsigned long long)size); + set_capacity(rbd_dev->disk, size); revalidate_disk(rbd_dev->disk); + } return ret; } -- cgit v0.10.2 From 29334ba49c3e3defd9a2697cd4a199c597c30dc9 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 07:40:30 -0500 Subject: rbd: kill rbd_update_mapping_size() Since rbd_update_mapping_size() is now a trivial wrapper, just open code it in its two callers. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 9c094c6..4c98695 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -3118,15 +3118,6 @@ static int rbd_read_header(struct rbd_device *rbd_dev, return ret; } -static void rbd_update_mapping_size(struct rbd_device *rbd_dev) -{ - if (rbd_dev->spec->snap_id != CEPH_NOSNAP) - return; - - if (rbd_dev->mapping.size != rbd_dev->header.image_size) - rbd_dev->mapping.size = rbd_dev->header.image_size; -} - /* * only read the first part of the ondisk header, without the snaps info */ @@ -3143,7 +3134,9 @@ static int rbd_dev_v1_refresh(struct rbd_device *rbd_dev) /* Update image size, and check for resize of mapped image */ rbd_dev->header.image_size = h.image_size; - rbd_update_mapping_size(rbd_dev); + if (rbd_dev->spec->snap_id == CEPH_NOSNAP) + if (rbd_dev->mapping.size != rbd_dev->header.image_size) + rbd_dev->mapping.size = rbd_dev->header.image_size; /* rbd_dev->header.object_prefix shouldn't change */ kfree(rbd_dev->header.snap_sizes); @@ -4074,7 +4067,9 @@ static int rbd_dev_v2_refresh(struct rbd_device *rbd_dev) ret = rbd_dev_v2_image_size(rbd_dev); if (ret) goto out; - rbd_update_mapping_size(rbd_dev); + if (rbd_dev->spec->snap_id == CEPH_NOSNAP) + if (rbd_dev->mapping.size != rbd_dev->header.image_size) + rbd_dev->mapping.size = rbd_dev->header.image_size; ret = rbd_dev_v2_snap_context(rbd_dev); dout("rbd_dev_v2_snap_context returned %d\n", ret); -- cgit v0.10.2 From c734b79655a91a24afcae73738a43a0db09a801a Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 07:40:30 -0500 Subject: rbd: don't print warning if not mapping a parent The presence of the LAYERING bit in an rbd image's feature mask does not guarantee the image actually has a parent image. Currently that bit is set only when a clone (i.e., image with a parent) is created, but it is (currently) not cleared if that clone gets flattened back into a "normal" image. A "parent_id" query will leave the parent_spec for the image being mapped a null pointer, but will not return an error. Currently, whenever an image with the LAYERED feature gets mapped, a warning about the use of layered images gets printed. But we don't want to do this for a flattened image, so print the warning only if we find there is a parent spec after the probe. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 4c98695..2d34aea 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -4567,13 +4567,14 @@ static int rbd_dev_v2_probe(struct rbd_device *rbd_dev) ret = rbd_dev_v2_parent_info(rbd_dev); if (ret) goto out_err; - /* - * Don't print a warning for parent images. We can - * tell this point because we won't know its pool - * name yet (just its pool id). + * Print a warning if this image has a parent. + * Don't print it if the image now being probed + * is itself a parent. We can tell at this point + * because we won't know its pool name yet (just its + * pool id). */ - if (rbd_dev->spec->pool_name) + if (rbd_dev->parent_spec && rbd_dev->spec->pool_name) rbd_warn(rbd_dev, "WARNING: kernel layering " "is EXPERIMENTAL!"); } -- cgit v0.10.2 From 8f4b7d9821715767ac28bbc2d401bbb5f3f9a448 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 07:40:30 -0500 Subject: rbd: don't look up snapshot id in rbd_dev_mapping_set() Currently rbd_dev_mapping_set() looks up the snapshot id for the snapshot whose name is found in the rbd device's spec structure. That function gets called by rbd_dev_device_setup(), which is called by rbd_add() *after* rbd_dev_image_probe(). If the image probe succeeds, the rbd device's spec will already have been updated to include names and ids for all fields. Therefore there's no need to look up the snapshot id in rbd_dev_mapping_set(). Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 2d34aea..75a8cea 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -936,20 +936,11 @@ static int rbd_snap_features(struct rbd_device *rbd_dev, u64 snap_id, static int rbd_dev_mapping_set(struct rbd_device *rbd_dev) { - const char *snap_name = rbd_dev->spec->snap_name; - u64 snap_id; + u64 snap_id = rbd_dev->spec->snap_id; u64 size = 0; u64 features = 0; int ret; - if (strcmp(snap_name, RBD_SNAP_HEAD_NAME)) { - snap_id = rbd_snap_id_by_name(rbd_dev, snap_name); - if (snap_id == CEPH_NOSNAP) - return -ENOENT; - } else { - snap_id = CEPH_NOSNAP; - } - ret = rbd_snap_size(rbd_dev, snap_id, &size); if (ret) return ret; -- cgit v0.10.2 From 6d80b130d516deef51666e210fde674c947b8b5c Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 07:40:30 -0500 Subject: rbd: kill rbd_dev_clear_mapping() This function is a duplicate of rbd_dev_mapping_clear(), and was added by mistake. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 75a8cea..a62e59a 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -966,13 +966,6 @@ static void rbd_dev_mapping_clear(struct rbd_device *rbd_dev) rbd_dev->mapping.read_only = true; } -static void rbd_dev_clear_mapping(struct rbd_device *rbd_dev) -{ - rbd_dev->mapping.size = 0; - rbd_dev->mapping.features = 0; - rbd_dev->mapping.read_only = true; -} - static const char *rbd_segment_name(struct rbd_device *rbd_dev, u64 offset) { char *name; @@ -4910,7 +4903,7 @@ static void rbd_dev_device_release(struct device *dev) rbd_free_disk(rbd_dev); clear_bit(RBD_DEV_FLAG_EXISTS, &rbd_dev->flags); - rbd_dev_clear_mapping(rbd_dev); + rbd_dev_mapping_clear(rbd_dev); unregister_blkdev(rbd_dev->major, rbd_dev->name); rbd_dev->major = 0; rbd_dev_id_put(rbd_dev); -- cgit v0.10.2 From 51344a38ba2033be18a4ec23e318845caeccdc04 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 07:40:30 -0500 Subject: rbd: always set read-only flag in rbd_add() Hold off setting the read-only flag in rbd_add() for an image being mapped until we have successfully probed the image. At that point we know whether it's a snapshot mapping or not, so we can set the read-only flag in that one place rather than doing so (for snapshots) in rbd_dev_mapping_set(). To do this, pass a flag to the image probe routine indicating whether we want a read-only mapping. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index a62e59a..b5cac79 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -359,7 +359,7 @@ static ssize_t rbd_add(struct bus_type *bus, const char *buf, size_t count); static ssize_t rbd_remove(struct bus_type *bus, const char *buf, size_t count); -static int rbd_dev_image_probe(struct rbd_device *rbd_dev); +static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool read_only); static struct bus_attribute rbd_bus_attrs[] = { __ATTR(add, S_IWUSR, NULL, rbd_add), @@ -951,11 +951,6 @@ static int rbd_dev_mapping_set(struct rbd_device *rbd_dev) rbd_dev->mapping.size = size; rbd_dev->mapping.features = features; - /* If we are mapping a snapshot it must be marked read-only */ - - if (snap_id != CEPH_NOSNAP) - rbd_dev->mapping.read_only = true; - return 0; } @@ -963,7 +958,6 @@ static void rbd_dev_mapping_clear(struct rbd_device *rbd_dev) { rbd_dev->mapping.size = 0; rbd_dev->mapping.features = 0; - rbd_dev->mapping.read_only = true; } static const char *rbd_segment_name(struct rbd_device *rbd_dev, u64 offset) @@ -4620,7 +4614,7 @@ static int rbd_dev_probe_parent(struct rbd_device *rbd_dev) if (!parent) goto out_err; - ret = rbd_dev_image_probe(parent); + ret = rbd_dev_image_probe(parent, true); if (ret < 0) goto out_err; rbd_dev->parent = parent; @@ -4743,7 +4737,7 @@ static void rbd_dev_image_release(struct rbd_device *rbd_dev) * device. For format 2 images this includes determining the image * id. */ -static int rbd_dev_image_probe(struct rbd_device *rbd_dev) +static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool read_only) { int ret; int tmp; @@ -4778,6 +4772,12 @@ static int rbd_dev_image_probe(struct rbd_device *rbd_dev) if (ret) goto err_out_probe; + /* If we are mapping a snapshot it must be marked read-only */ + + if (rbd_dev->spec->snap_id != CEPH_NOSNAP) + read_only = true; + rbd_dev->mapping.read_only = read_only; + ret = rbd_dev_probe_parent(rbd_dev); if (!ret) return 0; @@ -4811,6 +4811,7 @@ static ssize_t rbd_add(struct bus_type *bus, struct rbd_spec *spec = NULL; struct rbd_client *rbdc; struct ceph_osd_client *osdc; + bool read_only; int rc = -ENOMEM; if (!try_module_get(THIS_MODULE)) @@ -4820,6 +4821,9 @@ static ssize_t rbd_add(struct bus_type *bus, rc = rbd_add_parse_args(buf, &ceph_opts, &rbd_opts, &spec); if (rc < 0) goto err_out_module; + read_only = rbd_opts->read_only; + kfree(rbd_opts); + rbd_opts = NULL; /* done with this */ rbdc = rbd_get_client(ceph_opts); if (IS_ERR(rbdc)) { @@ -4850,11 +4854,7 @@ static ssize_t rbd_add(struct bus_type *bus, rbdc = NULL; /* rbd_dev now owns this */ spec = NULL; /* rbd_dev now owns this */ - rbd_dev->mapping.read_only = rbd_opts->read_only; - kfree(rbd_opts); - rbd_opts = NULL; /* done with this */ - - rc = rbd_dev_image_probe(rbd_dev); + rc = rbd_dev_image_probe(rbd_dev, read_only); if (rc < 0) goto err_out_rbd_dev; -- cgit v0.10.2 From 73b82bf0bfbf58e6ff328d3726934370585f6e78 Mon Sep 17 00:00:00 2001 From: Thommy Jakobsson Date: Tue, 23 Apr 2013 21:45:11 +0200 Subject: B43: Handle DMA RX descriptor underrun Add handling of rx descriptor underflow. This fixes a fault that could happen on slow machines, where data is received faster than the CPU can handle. In such a case the device will use up all rx descriptors and refuse to send any more data before confirming that it is ok. This patch enables necessary interrupt to discover such a situation and will handle them by dropping everything in the ring buffer. Reviewed-by: Michael Buesch Signed-off-by: Thommy Jakobsson Cc: stable Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index 1221469..ee3d640 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -1733,6 +1733,25 @@ drop_recycle_buffer: sync_descbuffer_for_device(ring, dmaaddr, ring->rx_buffersize); } +void b43_dma_handle_rx_overflow(struct b43_dmaring *ring) +{ + int current_slot, previous_slot; + + B43_WARN_ON(ring->tx); + + /* Device has filled all buffers, drop all packets and let TCP + * decrease speed. + * Decrement RX index by one will let the device to see all slots + * as free again + */ + /* + *TODO: How to increase rx_drop in mac80211? + */ + current_slot = ring->ops->get_current_rxslot(ring); + previous_slot = prev_slot(ring, current_slot); + ring->ops->set_current_rxslot(ring, previous_slot); +} + void b43_dma_rx(struct b43_dmaring *ring) { const struct b43_dma_ops *ops = ring->ops; diff --git a/drivers/net/wireless/b43/dma.h b/drivers/net/wireless/b43/dma.h index 9fdd198..df8c8cd 100644 --- a/drivers/net/wireless/b43/dma.h +++ b/drivers/net/wireless/b43/dma.h @@ -9,7 +9,7 @@ /* DMA-Interrupt reasons. */ #define B43_DMAIRQ_FATALMASK ((1 << 10) | (1 << 11) | (1 << 12) \ | (1 << 14) | (1 << 15)) -#define B43_DMAIRQ_NONFATALMASK (1 << 13) +#define B43_DMAIRQ_RDESC_UFLOW (1 << 13) #define B43_DMAIRQ_RX_DONE (1 << 16) /*** 32-bit DMA Engine. ***/ @@ -295,6 +295,8 @@ int b43_dma_tx(struct b43_wldev *dev, void b43_dma_handle_txstatus(struct b43_wldev *dev, const struct b43_txstatus *status); +void b43_dma_handle_rx_overflow(struct b43_dmaring *ring); + void b43_dma_rx(struct b43_dmaring *ring); void b43_dma_direct_fifo_rx(struct b43_wldev *dev, diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index d377f77..6dd07e2 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -1902,30 +1902,18 @@ static void b43_do_interrupt_thread(struct b43_wldev *dev) } } - if (unlikely(merged_dma_reason & (B43_DMAIRQ_FATALMASK | - B43_DMAIRQ_NONFATALMASK))) { - if (merged_dma_reason & B43_DMAIRQ_FATALMASK) { - b43err(dev->wl, "Fatal DMA error: " - "0x%08X, 0x%08X, 0x%08X, " - "0x%08X, 0x%08X, 0x%08X\n", - dma_reason[0], dma_reason[1], - dma_reason[2], dma_reason[3], - dma_reason[4], dma_reason[5]); - b43err(dev->wl, "This device does not support DMA " + if (unlikely(merged_dma_reason & (B43_DMAIRQ_FATALMASK))) { + b43err(dev->wl, + "Fatal DMA error: 0x%08X, 0x%08X, 0x%08X, 0x%08X, 0x%08X, 0x%08X\n", + dma_reason[0], dma_reason[1], + dma_reason[2], dma_reason[3], + dma_reason[4], dma_reason[5]); + b43err(dev->wl, "This device does not support DMA " "on your system. It will now be switched to PIO.\n"); - /* Fall back to PIO transfers if we get fatal DMA errors! */ - dev->use_pio = true; - b43_controller_restart(dev, "DMA error"); - return; - } - if (merged_dma_reason & B43_DMAIRQ_NONFATALMASK) { - b43err(dev->wl, "DMA error: " - "0x%08X, 0x%08X, 0x%08X, " - "0x%08X, 0x%08X, 0x%08X\n", - dma_reason[0], dma_reason[1], - dma_reason[2], dma_reason[3], - dma_reason[4], dma_reason[5]); - } + /* Fall back to PIO transfers if we get fatal DMA errors! */ + dev->use_pio = true; + b43_controller_restart(dev, "DMA error"); + return; } if (unlikely(reason & B43_IRQ_UCODE_DEBUG)) @@ -1944,6 +1932,11 @@ static void b43_do_interrupt_thread(struct b43_wldev *dev) handle_irq_noise(dev); /* Check the DMA reason registers for received data. */ + if (dma_reason[0] & B43_DMAIRQ_RDESC_UFLOW) { + if (B43_DEBUG) + b43warn(dev->wl, "RX descriptor underrun\n"); + b43_dma_handle_rx_overflow(dev->dma.rx_ring); + } if (dma_reason[0] & B43_DMAIRQ_RX_DONE) { if (b43_using_pio_transfers(dev)) b43_pio_rx(dev->pio.rx_queue); @@ -2001,7 +1994,7 @@ static irqreturn_t b43_do_interrupt(struct b43_wldev *dev) return IRQ_NONE; dev->dma_reason[0] = b43_read32(dev, B43_MMIO_DMA0_REASON) - & 0x0001DC00; + & 0x0001FC00; dev->dma_reason[1] = b43_read32(dev, B43_MMIO_DMA1_REASON) & 0x0000DC00; dev->dma_reason[2] = b43_read32(dev, B43_MMIO_DMA2_REASON) @@ -3130,7 +3123,7 @@ static int b43_chip_init(struct b43_wldev *dev) b43_write32(dev, 0x018C, 0x02000000); } b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, 0x00004000); - b43_write32(dev, B43_MMIO_DMA0_IRQ_MASK, 0x0001DC00); + b43_write32(dev, B43_MMIO_DMA0_IRQ_MASK, 0x0001FC00); b43_write32(dev, B43_MMIO_DMA1_IRQ_MASK, 0x0000DC00); b43_write32(dev, B43_MMIO_DMA2_IRQ_MASK, 0x0000DC00); b43_write32(dev, B43_MMIO_DMA3_IRQ_MASK, 0x0001DC00); -- cgit v0.10.2 From dd9c46408fdc07098333655ff27edf8cac8d9fcf Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Tue, 7 May 2013 18:07:06 +0200 Subject: iwl4965: workaround connection regression on passive channel Jake reported that since commit 1672c0e31917f49d31d30d79067103432bc20cc7 "mac80211: start auth/assoc timeout on frame status", he is unable to connect to his AP, which is configured to use passive channel. After switch to passive channel 4965 firmware drops any TX packet until it receives beacon. Before commit 1672c0e3 we waited on channel and retransmit packet after 200ms, that makes we receive beacon on the meantime and association process succeed. New mac80211 behaviour cause that any ASSOC frame fail immediately on iwl4965 and we can not associate. This patch restore old mac80211 behaviour for iwl4965, by removing IEEE80211_HW_REPORTS_TX_ACK_STATUS feature. This feature will be added again to iwl4965 driver, when different, more complex workaround for this firmware issue, will be added to the driver. Cc: stable@vger.kernel.org # 3.9 Bisected-by: Jake Edge Reported-and-tested-by: Jake Edge Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index 431ae6c..289701e 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -5741,8 +5741,7 @@ il4965_mac_setup_register(struct il_priv *il, u32 max_probe_length) hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_AMPDU_AGGREGATION | IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC | IEEE80211_HW_SPECTRUM_MGMT | - IEEE80211_HW_REPORTS_TX_ACK_STATUS | IEEE80211_HW_SUPPORTS_PS | - IEEE80211_HW_SUPPORTS_DYNAMIC_PS; + IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_SUPPORTS_DYNAMIC_PS; if (il->cfg->sku & IL_SKU_N) hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS | -- cgit v0.10.2 From a67682804165c428d5fd52c1a70fcd2a7502c056 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 6 May 2013 10:09:03 +0530 Subject: ath9k: Fix beacon reconfiguration When a reset or a channel-change happens, for managed mode, the HW beacon timers have to be programmed after the TSF has been synchronized. This is handled via the sync flags. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index c4fc3d1..a18414b 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -227,13 +227,13 @@ static bool ath_complete_reset(struct ath_softc *sc, bool start) if (!test_bit(SC_OP_BEACONS, &sc->sc_flags)) goto work; - ath9k_set_beacon(sc); - if (ah->opmode == NL80211_IFTYPE_STATION && test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) { spin_lock_irqsave(&sc->sc_pm_lock, flags); sc->ps_flags |= PS_BEACON_SYNC | PS_WAIT_FOR_BEACON; spin_unlock_irqrestore(&sc->sc_pm_lock, flags); + } else { + ath9k_set_beacon(sc); } work: ath_restart_work(sc); -- cgit v0.10.2 From f0fb6af2918ea6b6f781f7d598d7cd72cea28915 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 6 May 2013 10:09:33 +0530 Subject: ath9k: Update initvals for AR9565 * Register Modification for xLNA board. * TX gain table modification for zero calibration. * AUX chain (LNA2) sensitivity enhancement * Modify diversity bias default setting in INI. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9565_1p0_initvals.h b/drivers/net/wireless/ath/ath9k/ar9565_1p0_initvals.h index 0c2ac0c..e85a8b0 100644 --- a/drivers/net/wireless/ath/ath9k/ar9565_1p0_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9565_1p0_initvals.h @@ -233,9 +233,9 @@ static const u32 ar9565_1p0_baseband_core[][2] = { {0x00009d10, 0x01834061}, {0x00009d14, 0x00c00400}, {0x00009d18, 0x00000000}, - {0x00009e08, 0x0078230c}, - {0x00009e24, 0x990bb515}, - {0x00009e28, 0x126f0000}, + {0x00009e08, 0x0038230c}, + {0x00009e24, 0x9907b515}, + {0x00009e28, 0x126f0600}, {0x00009e30, 0x06336f77}, {0x00009e34, 0x6af6532f}, {0x00009e38, 0x0cc80c00}, @@ -337,7 +337,7 @@ static const u32 ar9565_1p0_baseband_core[][2] = { static const u32 ar9565_1p0_baseband_postamble[][5] = { /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ - {0x00009810, 0xd00a8005, 0xd00a8005, 0xd00a8005, 0xd00a800d}, + {0x00009810, 0xd00a8005, 0xd00a8005, 0xd00a8005, 0xd00a8009}, {0x00009820, 0x206a022e, 0x206a022e, 0x206a012e, 0x206a01ae}, {0x00009824, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0, 0x63c640da}, {0x00009828, 0x06903081, 0x06903081, 0x06903881, 0x09143c81}, @@ -345,9 +345,9 @@ static const u32 ar9565_1p0_baseband_postamble[][5] = { {0x00009830, 0x0000059c, 0x0000059c, 0x0000059c, 0x0000059c}, {0x00009c00, 0x000000c4, 0x000000c4, 0x000000c4, 0x000000c4}, {0x00009e00, 0x0372111a, 0x0372111a, 0x037216a0, 0x037216a0}, - {0x00009e04, 0x00802020, 0x00802020, 0x00802020, 0x00802020}, - {0x00009e0c, 0x6c4000e2, 0x6d4000e2, 0x6d4000e2, 0x6c4000d8}, - {0x00009e10, 0x7ec88d2e, 0x7ec88d2e, 0x7ec84d2e, 0x7ec86d2e}, + {0x00009e04, 0x00802020, 0x00802020, 0x00142020, 0x00142020}, + {0x00009e0c, 0x6c4000e2, 0x6d4000e2, 0x6d4000e2, 0x6c4000e2}, + {0x00009e10, 0x7ec88d2e, 0x7ec88d2e, 0x7ec84d2e, 0x7ec84d2e}, {0x00009e14, 0x37b95d5e, 0x37b9605e, 0x3379605e, 0x33795d5e}, {0x00009e18, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x00009e1c, 0x0001cf9c, 0x0001cf9c, 0x00021f9c, 0x00021f9c}, @@ -450,6 +450,8 @@ static const u32 ar9565_1p0_soc_postamble[][5] = { static const u32 ar9565_1p0_Common_rx_gain_table[][2] = { /* Addr allmodes */ + {0x00004050, 0x00300300}, + {0x0000406c, 0x00100000}, {0x0000a000, 0x00010000}, {0x0000a004, 0x00030002}, {0x0000a008, 0x00050004}, @@ -498,27 +500,27 @@ static const u32 ar9565_1p0_Common_rx_gain_table[][2] = { {0x0000a0b4, 0x00000000}, {0x0000a0b8, 0x00000000}, {0x0000a0bc, 0x00000000}, - {0x0000a0c0, 0x001f0000}, - {0x0000a0c4, 0x01000101}, - {0x0000a0c8, 0x011e011f}, - {0x0000a0cc, 0x011c011d}, - {0x0000a0d0, 0x02030204}, - {0x0000a0d4, 0x02010202}, - {0x0000a0d8, 0x021f0200}, - {0x0000a0dc, 0x0302021e}, - {0x0000a0e0, 0x03000301}, - {0x0000a0e4, 0x031e031f}, - {0x0000a0e8, 0x0402031d}, - {0x0000a0ec, 0x04000401}, - {0x0000a0f0, 0x041e041f}, - {0x0000a0f4, 0x0502041d}, - {0x0000a0f8, 0x05000501}, - {0x0000a0fc, 0x051e051f}, - {0x0000a100, 0x06010602}, - {0x0000a104, 0x061f0600}, - {0x0000a108, 0x061d061e}, - {0x0000a10c, 0x07020703}, - {0x0000a110, 0x07000701}, + {0x0000a0c0, 0x00bf00a0}, + {0x0000a0c4, 0x11a011a1}, + {0x0000a0c8, 0x11be11bf}, + {0x0000a0cc, 0x11bc11bd}, + {0x0000a0d0, 0x22632264}, + {0x0000a0d4, 0x22612262}, + {0x0000a0d8, 0x227f2260}, + {0x0000a0dc, 0x4322227e}, + {0x0000a0e0, 0x43204321}, + {0x0000a0e4, 0x433e433f}, + {0x0000a0e8, 0x4462433d}, + {0x0000a0ec, 0x44604461}, + {0x0000a0f0, 0x447e447f}, + {0x0000a0f4, 0x5582447d}, + {0x0000a0f8, 0x55805581}, + {0x0000a0fc, 0x559e559f}, + {0x0000a100, 0x66816682}, + {0x0000a104, 0x669f6680}, + {0x0000a108, 0x669d669e}, + {0x0000a10c, 0x77627763}, + {0x0000a110, 0x77607761}, {0x0000a114, 0x00000000}, {0x0000a118, 0x00000000}, {0x0000a11c, 0x00000000}, @@ -530,27 +532,27 @@ static const u32 ar9565_1p0_Common_rx_gain_table[][2] = { {0x0000a134, 0x00000000}, {0x0000a138, 0x00000000}, {0x0000a13c, 0x00000000}, - {0x0000a140, 0x001f0000}, - {0x0000a144, 0x01000101}, - {0x0000a148, 0x011e011f}, - {0x0000a14c, 0x011c011d}, - {0x0000a150, 0x02030204}, - {0x0000a154, 0x02010202}, - {0x0000a158, 0x021f0200}, - {0x0000a15c, 0x0302021e}, - {0x0000a160, 0x03000301}, - {0x0000a164, 0x031e031f}, - {0x0000a168, 0x0402031d}, - {0x0000a16c, 0x04000401}, - {0x0000a170, 0x041e041f}, - {0x0000a174, 0x0502041d}, - {0x0000a178, 0x05000501}, - {0x0000a17c, 0x051e051f}, - {0x0000a180, 0x06010602}, - {0x0000a184, 0x061f0600}, - {0x0000a188, 0x061d061e}, - {0x0000a18c, 0x07020703}, - {0x0000a190, 0x07000701}, + {0x0000a140, 0x00bf00a0}, + {0x0000a144, 0x11a011a1}, + {0x0000a148, 0x11be11bf}, + {0x0000a14c, 0x11bc11bd}, + {0x0000a150, 0x22632264}, + {0x0000a154, 0x22612262}, + {0x0000a158, 0x227f2260}, + {0x0000a15c, 0x4322227e}, + {0x0000a160, 0x43204321}, + {0x0000a164, 0x433e433f}, + {0x0000a168, 0x4462433d}, + {0x0000a16c, 0x44604461}, + {0x0000a170, 0x447e447f}, + {0x0000a174, 0x5582447d}, + {0x0000a178, 0x55805581}, + {0x0000a17c, 0x559e559f}, + {0x0000a180, 0x66816682}, + {0x0000a184, 0x669f6680}, + {0x0000a188, 0x669d669e}, + {0x0000a18c, 0x77e677e7}, + {0x0000a190, 0x77e477e5}, {0x0000a194, 0x00000000}, {0x0000a198, 0x00000000}, {0x0000a19c, 0x00000000}, @@ -770,7 +772,7 @@ static const u32 ar9565_1p0_Modes_lowest_ob_db_tx_gain_table[][5] = { static const u32 ar9565_1p0_pciephy_clkreq_disable_L1[][2] = { /* Addr allmodes */ - {0x00018c00, 0x18213ede}, + {0x00018c00, 0x18212ede}, {0x00018c04, 0x000801d8}, {0x00018c08, 0x0003780c}, }; @@ -889,8 +891,8 @@ static const u32 ar9565_1p0_common_wo_xlna_rx_gain_table[][2] = { {0x0000a180, 0x66816682}, {0x0000a184, 0x669f6680}, {0x0000a188, 0x669d669e}, - {0x0000a18c, 0x77627763}, - {0x0000a190, 0x77607761}, + {0x0000a18c, 0x77e677e7}, + {0x0000a190, 0x77e477e5}, {0x0000a194, 0x00000000}, {0x0000a198, 0x00000000}, {0x0000a19c, 0x00000000}, @@ -1114,7 +1116,7 @@ static const u32 ar9565_1p0_modes_high_ob_db_tx_gain_table[][5] = { {0x0000a2e0, 0xffecec00, 0xffecec00, 0xfd339c84, 0xfd339c84}, {0x0000a2e4, 0xfc0f0000, 0xfc0f0000, 0xfec3e000, 0xfec3e000}, {0x0000a2e8, 0xfc100000, 0xfc100000, 0xfffc0000, 0xfffc0000}, - {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9}, + {0x0000a410, 0x000050d9, 0x000050d9, 0x000050df, 0x000050df}, {0x0000a500, 0x00002220, 0x00002220, 0x00000000, 0x00000000}, {0x0000a504, 0x06002223, 0x06002223, 0x04000002, 0x04000002}, {0x0000a508, 0x0b022220, 0x0b022220, 0x08000004, 0x08000004}, @@ -1140,13 +1142,13 @@ static const u32 ar9565_1p0_modes_high_ob_db_tx_gain_table[][5] = { {0x0000a558, 0x69027f56, 0x69027f56, 0x53001ce5, 0x53001ce5}, {0x0000a55c, 0x6d029f56, 0x6d029f56, 0x57001ce9, 0x57001ce9}, {0x0000a560, 0x73049f56, 0x73049f56, 0x5b001ceb, 0x5b001ceb}, - {0x0000a564, 0x7804ff56, 0x7804ff56, 0x5d001eec, 0x5d001eec}, - {0x0000a568, 0x7804ff56, 0x7804ff56, 0x5d001eec, 0x5d001eec}, - {0x0000a56c, 0x7804ff56, 0x7804ff56, 0x5d001eec, 0x5d001eec}, - {0x0000a570, 0x7804ff56, 0x7804ff56, 0x5d001eec, 0x5d001eec}, - {0x0000a574, 0x7804ff56, 0x7804ff56, 0x5d001eec, 0x5d001eec}, - {0x0000a578, 0x7804ff56, 0x7804ff56, 0x5d001eec, 0x5d001eec}, - {0x0000a57c, 0x7804ff56, 0x7804ff56, 0x5d001eec, 0x5d001eec}, + {0x0000a564, 0x7804ff56, 0x7804ff56, 0x60001cf0, 0x60001cf0}, + {0x0000a568, 0x7804ff56, 0x7804ff56, 0x61001cf1, 0x61001cf1}, + {0x0000a56c, 0x7804ff56, 0x7804ff56, 0x62001cf2, 0x62001cf2}, + {0x0000a570, 0x7804ff56, 0x7804ff56, 0x63001cf3, 0x63001cf3}, + {0x0000a574, 0x7804ff56, 0x7804ff56, 0x64001cf4, 0x64001cf4}, + {0x0000a578, 0x7804ff56, 0x7804ff56, 0x66001ff6, 0x66001ff6}, + {0x0000a57c, 0x7804ff56, 0x7804ff56, 0x66001ff6, 0x66001ff6}, {0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, @@ -1174,7 +1176,7 @@ static const u32 ar9565_1p0_modes_high_power_tx_gain_table[][5] = { {0x0000a2e0, 0xffecec00, 0xffecec00, 0xfd339c84, 0xfd339c84}, {0x0000a2e4, 0xfc0f0000, 0xfc0f0000, 0xfec3e000, 0xfec3e000}, {0x0000a2e8, 0xfc100000, 0xfc100000, 0xfffc0000, 0xfffc0000}, - {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9}, + {0x0000a410, 0x000050d9, 0x000050d9, 0x000050df, 0x000050df}, {0x0000a500, 0x00002220, 0x00002220, 0x00000000, 0x00000000}, {0x0000a504, 0x06002223, 0x06002223, 0x04000002, 0x04000002}, {0x0000a508, 0x0a022220, 0x0a022220, 0x08000004, 0x08000004}, @@ -1200,13 +1202,13 @@ static const u32 ar9565_1p0_modes_high_power_tx_gain_table[][5] = { {0x0000a558, 0x66027f56, 0x66027f56, 0x4c001ce5, 0x4c001ce5}, {0x0000a55c, 0x6a029f56, 0x6a029f56, 0x50001ce9, 0x50001ce9}, {0x0000a560, 0x70049f56, 0x70049f56, 0x54001ceb, 0x54001ceb}, - {0x0000a564, 0x7504ff56, 0x7504ff56, 0x56001eec, 0x56001eec}, - {0x0000a568, 0x7504ff56, 0x7504ff56, 0x56001eec, 0x56001eec}, - {0x0000a56c, 0x7504ff56, 0x7504ff56, 0x56001eec, 0x56001eec}, - {0x0000a570, 0x7504ff56, 0x7504ff56, 0x56001eec, 0x56001eec}, - {0x0000a574, 0x7504ff56, 0x7504ff56, 0x56001eec, 0x56001eec}, - {0x0000a578, 0x7504ff56, 0x7504ff56, 0x56001eec, 0x56001eec}, - {0x0000a57c, 0x7504ff56, 0x7504ff56, 0x56001eec, 0x56001eec}, + {0x0000a564, 0x7504ff56, 0x7504ff56, 0x59001cf0, 0x59001cf0}, + {0x0000a568, 0x7504ff56, 0x7504ff56, 0x5a001cf1, 0x5a001cf1}, + {0x0000a56c, 0x7504ff56, 0x7504ff56, 0x5b001cf2, 0x5b001cf2}, + {0x0000a570, 0x7504ff56, 0x7504ff56, 0x5c001cf3, 0x5c001cf3}, + {0x0000a574, 0x7504ff56, 0x7504ff56, 0x5d001cf4, 0x5d001cf4}, + {0x0000a578, 0x7504ff56, 0x7504ff56, 0x5f001ff6, 0x5f001ff6}, + {0x0000a57c, 0x7504ff56, 0x7504ff56, 0x5f001ff6, 0x5f001ff6}, {0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, -- cgit v0.10.2 From 48795424acff7215d5eac0b52793a2c1eb3a6283 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Mon, 6 May 2013 19:46:53 -0700 Subject: mwifiex: clear is_suspended flag when interrupt is received early When the XO-4 with 8787 wireless is woken up due to wake-on-WLAN mwifiex is often flooded with "not allowed while suspended" messages and the interface is unusable. [ 202.171609] int: sdio_ireg = 0x1 [ 202.180700] info: mwifiex_process_hs_config: auto cancelling host sleep since there is interrupt from the firmware [ 202.201880] event: wakeup device... [ 202.211452] event: hs_deactivated [ 202.514638] info: --- Rx: Data packet --- [ 202.514753] data: 4294957544 BSS(0-0): Data <= kernel [ 202.514825] PREP_CMD: device in suspended state [ 202.514839] data: dequeuing the packet ec7248c0 ec4869c0 [ 202.514886] mwifiex_write_data_sync: not allowed while suspended [ 202.514886] host_to_card, write iomem (1) failed: -1 [ 202.514917] mwifiex_write_data_sync: not allowed while suspended [ 202.514936] host_to_card, write iomem (2) failed: -1 [ 202.514949] mwifiex_write_data_sync: not allowed while suspended [ 202.514965] host_to_card, write iomem (3) failed: -1 [ 202.514976] mwifiex_write_data_async failed: 0xFFFFFFFF This can be readily reproduced when putting the XO-4 in a loop where it goes to sleep due to inactivity, but then wakes up due to an incoming ping. The error is hit within an hour or two. This issue happens when an interrupt comes in early while host sleep is still activated. Driver handles this case by auto cancelling host sleep. However is_suspended flag is still set which prevents any cmd or data from being sent to firmware. Fix it by clearing is_suspended flag in this path. Cc: Reported-by: Daniel Drake Tested-by: Daniel Drake Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c index 74db0d2..26755d9 100644 --- a/drivers/net/wireless/mwifiex/cmdevt.c +++ b/drivers/net/wireless/mwifiex/cmdevt.c @@ -1191,6 +1191,7 @@ mwifiex_process_hs_config(struct mwifiex_adapter *adapter) adapter->if_ops.wakeup(adapter); adapter->hs_activated = false; adapter->is_hs_configured = false; + adapter->is_suspended = false; mwifiex_hs_activated_event(mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY), false); -- cgit v0.10.2 From f16fdc9d2dc1e5b270e9a08377587e831e0d36ac Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Mon, 6 May 2013 19:46:54 -0700 Subject: mwifiex: fix memory leak issue when driver unload After unregister_netdevice() call the request is queued and reg_state is changed to NETREG_UNREGISTERING. As we check for NETREG_UNREGISTERED state, free_netdev() never gets executed causing memory leak. Initialize "dev->destructor" to free_netdev() to free device data after unregistration. Cc: Reported-by: Daniel Drake Tested-by: Daniel Drake Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index a0cb077..636145d 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -2234,9 +2234,6 @@ int mwifiex_del_virtual_intf(struct wiphy *wiphy, struct wireless_dev *wdev) if (wdev->netdev->reg_state == NETREG_REGISTERED) unregister_netdevice(wdev->netdev); - if (wdev->netdev->reg_state == NETREG_UNREGISTERED) - free_netdev(wdev->netdev); - /* Clear the priv in adapter */ priv->netdev = NULL; diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c index 121443a..2eb88ea 100644 --- a/drivers/net/wireless/mwifiex/main.c +++ b/drivers/net/wireless/mwifiex/main.c @@ -655,6 +655,7 @@ void mwifiex_init_priv_params(struct mwifiex_private *priv, struct net_device *dev) { dev->netdev_ops = &mwifiex_netdev_ops; + dev->destructor = free_netdev; /* Initialize private structure */ priv->current_key_index = 0; priv->media_connected = false; -- cgit v0.10.2 From ccd384b10420ac81ba3fb9b0a7d18272c7173552 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Wed, 8 May 2013 15:37:19 -0400 Subject: mwifiex: fix setting of multicast filter A small bug in this code was causing the ALLMULTI filter to be set when in fact we were just wanting to program a selective multicast list to the hardware. Fix that bug and remove a redundant if condition in the code that follows. This fixes wakeup behaviour when multicast WOL is enabled. Previously, all multicast packets would wake up the system. Now, only those that the host intended to receive trigger wakeups. Signed-off-by: Daniel Drake Cc: Acked-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c index 311d0b2..1a8a19d 100644 --- a/drivers/net/wireless/mwifiex/sta_ioctl.c +++ b/drivers/net/wireless/mwifiex/sta_ioctl.c @@ -96,7 +96,7 @@ int mwifiex_request_set_multicast_list(struct mwifiex_private *priv, } else { /* Multicast */ priv->curr_pkt_filter &= ~HostCmd_ACT_MAC_PROMISCUOUS_ENABLE; - if (mcast_list->mode == MWIFIEX_MULTICAST_MODE) { + if (mcast_list->mode == MWIFIEX_ALL_MULTI_MODE) { dev_dbg(priv->adapter->dev, "info: Enabling All Multicast!\n"); priv->curr_pkt_filter |= @@ -108,20 +108,11 @@ int mwifiex_request_set_multicast_list(struct mwifiex_private *priv, dev_dbg(priv->adapter->dev, "info: Set multicast list=%d\n", mcast_list->num_multicast_addr); - /* Set multicast addresses to firmware */ - if (old_pkt_filter == priv->curr_pkt_filter) { - /* Send request to firmware */ - ret = mwifiex_send_cmd_async(priv, - HostCmd_CMD_MAC_MULTICAST_ADR, - HostCmd_ACT_GEN_SET, 0, - mcast_list); - } else { - /* Send request to firmware */ - ret = mwifiex_send_cmd_async(priv, - HostCmd_CMD_MAC_MULTICAST_ADR, - HostCmd_ACT_GEN_SET, 0, - mcast_list); - } + /* Send multicast addresses to firmware */ + ret = mwifiex_send_cmd_async(priv, + HostCmd_CMD_MAC_MULTICAST_ADR, + HostCmd_ACT_GEN_SET, 0, + mcast_list); } } } -- cgit v0.10.2 From f35a4dee14c31dc00807f3bcd59cc7a6959f63d7 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 09:51:29 -0500 Subject: rbd: set the mapping size and features later Defer setting the size and features fields of a mapped image until after the Linux disk structure is set up. Set the capacity of the disk after that. Rearrange the definition of rbd_image_header, separating the fields that are set only once from those that can be updated. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index b5cac79..a05b6e5 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -100,21 +100,20 @@ * block device image metadata (in-memory version) */ struct rbd_image_header { - /* These four fields never change for a given rbd image */ + /* These six fields never change for a given rbd image */ char *object_prefix; - u64 features; __u8 obj_order; __u8 crypt_type; __u8 comp_type; + u64 stripe_unit; + u64 stripe_count; + u64 features; /* Might be changeable someday? */ /* The remaining fields need to be updated occasionally */ u64 image_size; struct ceph_snap_context *snapc; - char *snap_names; - u64 *snap_sizes; - - u64 stripe_unit; - u64 stripe_count; + char *snap_names; /* format 1 only */ + u64 *snap_sizes; /* format 1 only */ }; /* @@ -4637,10 +4636,6 @@ static int rbd_dev_device_setup(struct rbd_device *rbd_dev) { int ret; - ret = rbd_dev_mapping_set(rbd_dev); - if (ret) - return ret; - /* generate unique id: find highest unique id, add one */ rbd_dev_id_get(rbd_dev); @@ -4662,13 +4657,17 @@ static int rbd_dev_device_setup(struct rbd_device *rbd_dev) if (ret) goto err_out_blkdev; - ret = rbd_bus_add_dev(rbd_dev); + ret = rbd_dev_mapping_set(rbd_dev); if (ret) goto err_out_disk; + set_capacity(rbd_dev->disk, rbd_dev->mapping.size / SECTOR_SIZE); + + ret = rbd_bus_add_dev(rbd_dev); + if (ret) + goto err_out_mapping; /* Everything's ready. Announce the disk to the world. */ - set_capacity(rbd_dev->disk, rbd_dev->mapping.size / SECTOR_SIZE); set_bit(RBD_DEV_FLAG_EXISTS, &rbd_dev->flags); add_disk(rbd_dev->disk); @@ -4677,6 +4676,8 @@ static int rbd_dev_device_setup(struct rbd_device *rbd_dev) return ret; +err_out_mapping: + rbd_dev_mapping_clear(rbd_dev); err_out_disk: rbd_free_disk(rbd_dev); err_out_blkdev: -- cgit v0.10.2 From 46578dcdca951f3da70d3a5a9b5166b2a492a182 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 09:51:29 -0500 Subject: rbd: zero format 1 header structure earlier The passed-in header structure is zeroed in rbd_header_from_disk(). Instead, have the caller do it. Note that there are two callers, rbd_dev_v1_refresh() and rbd_dev_v1_probe(). The latter already has a zeroed header structure so zeroing it isn't necessary there. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index a05b6e5..b0fbc38 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -738,8 +738,6 @@ static int rbd_header_from_disk(struct rbd_image_header *header, size_t size; u32 i; - memset(header, 0, sizeof (*header)); - snap_count = le32_to_cpu(ondisk->snap_count); len = strnlen(ondisk->object_prefix, sizeof (ondisk->object_prefix)); @@ -3103,6 +3101,7 @@ static int rbd_dev_v1_refresh(struct rbd_device *rbd_dev) int ret; struct rbd_image_header h; + memset(&h, 0, sizeof (h)); ret = rbd_read_header(rbd_dev, &h); if (ret < 0) return ret; -- cgit v0.10.2 From bb23e37acb2ae9604130c4819fb8ae0f784a3a2b Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 09:51:29 -0500 Subject: rbd: refactor rbd_header_from_disk() This rearranges rbd_header_from_disk so that it: - allocates the snapshot context right away - keeps results in local variables, not changing the passed-in header until it's known we'll succeed - does initialization of set-once fields in a header only if they have not already been set The last point is moot at the moment, because rbd_read_header() (the only caller) always supplies a zero-filled header buffer. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index b0fbc38..a3b6bf5 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -727,86 +727,109 @@ static bool rbd_dev_ondisk_valid(struct rbd_image_header_ondisk *ondisk) } /* - * Create a new header structure, translate header format from the on-disk - * header. + * Fill an rbd image header with information from the given format 1 + * on-disk header. */ static int rbd_header_from_disk(struct rbd_image_header *header, struct rbd_image_header_ondisk *ondisk) { + bool first_time = header->object_prefix == NULL; + struct ceph_snap_context *snapc; + char *object_prefix = NULL; + char *snap_names = NULL; + u64 *snap_sizes = NULL; u32 snap_count; - size_t len; size_t size; + int ret = -ENOMEM; u32 i; - snap_count = le32_to_cpu(ondisk->snap_count); + /* Allocate this now to avoid having to handle failure below */ - len = strnlen(ondisk->object_prefix, sizeof (ondisk->object_prefix)); - header->object_prefix = kmalloc(len + 1, GFP_KERNEL); - if (!header->object_prefix) - return -ENOMEM; - memcpy(header->object_prefix, ondisk->object_prefix, len); - header->object_prefix[len] = '\0'; + if (first_time) { + size_t len; + len = strnlen(ondisk->object_prefix, + sizeof (ondisk->object_prefix)); + object_prefix = kmalloc(len + 1, GFP_KERNEL); + if (!object_prefix) + return -ENOMEM; + memcpy(object_prefix, ondisk->object_prefix, len); + object_prefix[len] = '\0'; + } + + /* Allocate the snapshot context and fill it in */ + + snap_count = le32_to_cpu(ondisk->snap_count); + snapc = ceph_create_snap_context(snap_count, GFP_KERNEL); + if (!snapc) + goto out_err; + snapc->seq = le64_to_cpu(ondisk->snap_seq); if (snap_count) { + struct rbd_image_snap_ondisk *snaps; u64 snap_names_len = le64_to_cpu(ondisk->snap_names_len); - /* Save a copy of the snapshot names */ + /* We'll keep a copy of the snapshot names... */ - if (snap_names_len > (u64) SIZE_MAX) - return -EIO; - header->snap_names = kmalloc(snap_names_len, GFP_KERNEL); - if (!header->snap_names) + if (snap_names_len > (u64)SIZE_MAX) + goto out_2big; + snap_names = kmalloc(snap_names_len, GFP_KERNEL); + if (!snap_names) goto out_err; - /* - * Note that rbd_dev_v1_header_read() guarantees - * the ondisk buffer we're working with has - * snap_names_len bytes beyond the end of the - * snapshot id array, this memcpy() is safe. - */ - memcpy(header->snap_names, &ondisk->snaps[snap_count], - snap_names_len); - /* Record each snapshot's size */ + /* ...as well as the array of their sizes. */ size = snap_count * sizeof (*header->snap_sizes); - header->snap_sizes = kmalloc(size, GFP_KERNEL); - if (!header->snap_sizes) + snap_sizes = kmalloc(size, GFP_KERNEL); + if (!snap_sizes) goto out_err; - for (i = 0; i < snap_count; i++) - header->snap_sizes[i] = - le64_to_cpu(ondisk->snaps[i].image_size); - } else { - header->snap_names = NULL; - header->snap_sizes = NULL; + + /* + * Copy the names, and fill in each snapshot's id + * and size. + * + * Note that rbd_dev_v1_header_read() guarantees the + * ondisk buffer we're working with has + * snap_names_len bytes beyond the end of the + * snapshot id array, this memcpy() is safe. + */ + memcpy(snap_names, &ondisk->snaps[snap_count], snap_names_len); + snaps = ondisk->snaps; + for (i = 0; i < snap_count; i++) { + snapc->snaps[i] = le64_to_cpu(snaps[i].id); + snap_sizes[i] = le64_to_cpu(snaps[i].image_size); + } } - header->features = 0; /* No features support in v1 images */ - header->obj_order = ondisk->options.order; - header->crypt_type = ondisk->options.crypt_type; - header->comp_type = ondisk->options.comp_type; + /* We won't fail any more, fill in the header */ + + if (first_time) { + header->object_prefix = object_prefix; + header->obj_order = ondisk->options.order; + header->crypt_type = ondisk->options.crypt_type; + header->comp_type = ondisk->options.comp_type; + /* The rest aren't used for format 1 images */ + header->stripe_unit = 0; + header->stripe_count = 0; + header->features = 0; + } - /* Allocate and fill in the snapshot context */ + /* The remaining fields always get updated (when we refresh) */ header->image_size = le64_to_cpu(ondisk->image_size); - - header->snapc = ceph_create_snap_context(snap_count, GFP_KERNEL); - if (!header->snapc) - goto out_err; - header->snapc->seq = le64_to_cpu(ondisk->snap_seq); - for (i = 0; i < snap_count; i++) - header->snapc->snaps[i] = le64_to_cpu(ondisk->snaps[i].id); + header->snapc = snapc; + header->snap_names = snap_names; + header->snap_sizes = snap_sizes; return 0; - +out_2big: + ret = -EIO; out_err: - kfree(header->snap_sizes); - header->snap_sizes = NULL; - kfree(header->snap_names); - header->snap_names = NULL; - kfree(header->object_prefix); - header->object_prefix = NULL; + kfree(snap_sizes); + kfree(snap_names); + ceph_put_snap_context(snapc); + kfree(object_prefix); - return -ENOMEM; + return ret; } static const char *_rbd_dev_v1_snap_name(struct rbd_device *rbd_dev, u32 which) -- cgit v0.10.2 From 662518b128c27def65e9af4bea2b56a1e04b3251 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 09:51:29 -0500 Subject: rbd: update in-core header directly Now that rbd_header_from_disk() only fills in one-time fields once, we can extend it slightly so it releases the other fields before replacing their values. This way there's no need to pass a temporary buffer and then copy all the results in. Just use the rbd device header structure in rbd_header_from_disk() so its values get updated directly. Note that this means we need to take the header semaphore at the point we update things. So pass the rbd_dev rather than the address of its header as its first argument to rbd_header_from_disk(), and have it return an error code. As a result, rbd_dev_v1_header_read() does all the work, rbd_read_header() becomes unnecessary, and rbd_dev_v1_refresh() becomes a very simple wrapper. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index a3b6bf5..e4586f2 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -730,9 +730,10 @@ static bool rbd_dev_ondisk_valid(struct rbd_image_header_ondisk *ondisk) * Fill an rbd image header with information from the given format 1 * on-disk header. */ -static int rbd_header_from_disk(struct rbd_image_header *header, +static int rbd_header_from_disk(struct rbd_device *rbd_dev, struct rbd_image_header_ondisk *ondisk) { + struct rbd_image_header *header = &rbd_dev->header; bool first_time = header->object_prefix == NULL; struct ceph_snap_context *snapc; char *object_prefix = NULL; @@ -802,6 +803,7 @@ static int rbd_header_from_disk(struct rbd_image_header *header, /* We won't fail any more, fill in the header */ + down_write(&rbd_dev->header_rwsem); if (first_time) { header->object_prefix = object_prefix; header->obj_order = ondisk->options.order; @@ -811,6 +813,10 @@ static int rbd_header_from_disk(struct rbd_image_header *header, header->stripe_unit = 0; header->stripe_count = 0; header->features = 0; + } else { + ceph_put_snap_context(header->snapc); + kfree(header->snap_names); + kfree(header->snap_sizes); } /* The remaining fields always get updated (when we refresh) */ @@ -820,6 +826,14 @@ static int rbd_header_from_disk(struct rbd_image_header *header, header->snap_names = snap_names; header->snap_sizes = snap_sizes; + /* Make sure mapping size is consistent with header info */ + + if (rbd_dev->spec->snap_id == CEPH_NOSNAP || first_time) + if (rbd_dev->mapping.size != header->image_size) + rbd_dev->mapping.size = header->image_size; + + up_write(&rbd_dev->header_rwsem); + return 0; out_2big: ret = -EIO; @@ -3032,17 +3046,11 @@ out: } /* - * Read the complete header for the given rbd device. - * - * Returns a pointer to a dynamically-allocated buffer containing - * the complete and validated header. Caller can pass the address - * of a variable that will be filled in with the version of the - * header object at the time it was read. - * - * Returns a pointer-coded errno if a failure occurs. + * Read the complete header for the given rbd device. On successful + * return, the rbd_dev->header field will contain up-to-date + * information about the image. */ -static struct rbd_image_header_ondisk * -rbd_dev_v1_header_read(struct rbd_device *rbd_dev) +static int rbd_dev_v1_header_read(struct rbd_device *rbd_dev) { struct rbd_image_header_ondisk *ondisk = NULL; u32 snap_count = 0; @@ -3067,22 +3075,22 @@ rbd_dev_v1_header_read(struct rbd_device *rbd_dev) size += names_size; ondisk = kmalloc(size, GFP_KERNEL); if (!ondisk) - return ERR_PTR(-ENOMEM); + return -ENOMEM; ret = rbd_obj_read_sync(rbd_dev, rbd_dev->header_name, 0, size, ondisk); if (ret < 0) - goto out_err; + goto out; if ((size_t)ret < size) { ret = -ENXIO; rbd_warn(rbd_dev, "short header read (want %zd got %d)", size, ret); - goto out_err; + goto out; } if (!rbd_dev_ondisk_valid(ondisk)) { ret = -ENXIO; rbd_warn(rbd_dev, "invalid header"); - goto out_err; + goto out; } names_size = le64_to_cpu(ondisk->snap_names_len); @@ -3090,27 +3098,8 @@ rbd_dev_v1_header_read(struct rbd_device *rbd_dev) snap_count = le32_to_cpu(ondisk->snap_count); } while (snap_count != want_count); - return ondisk; - -out_err: - kfree(ondisk); - - return ERR_PTR(ret); -} - -/* - * reload the ondisk the header - */ -static int rbd_read_header(struct rbd_device *rbd_dev, - struct rbd_image_header *header) -{ - struct rbd_image_header_ondisk *ondisk; - int ret; - - ondisk = rbd_dev_v1_header_read(rbd_dev); - if (IS_ERR(ondisk)) - return PTR_ERR(ondisk); - ret = rbd_header_from_disk(header, ondisk); + ret = rbd_header_from_disk(rbd_dev, ondisk); +out: kfree(ondisk); return ret; @@ -3121,40 +3110,7 @@ static int rbd_read_header(struct rbd_device *rbd_dev, */ static int rbd_dev_v1_refresh(struct rbd_device *rbd_dev) { - int ret; - struct rbd_image_header h; - - memset(&h, 0, sizeof (h)); - ret = rbd_read_header(rbd_dev, &h); - if (ret < 0) - return ret; - - down_write(&rbd_dev->header_rwsem); - - /* Update image size, and check for resize of mapped image */ - rbd_dev->header.image_size = h.image_size; - if (rbd_dev->spec->snap_id == CEPH_NOSNAP) - if (rbd_dev->mapping.size != rbd_dev->header.image_size) - rbd_dev->mapping.size = rbd_dev->header.image_size; - - /* rbd_dev->header.object_prefix shouldn't change */ - kfree(rbd_dev->header.snap_sizes); - kfree(rbd_dev->header.snap_names); - /* osd requests may still refer to snapc */ - ceph_put_snap_context(rbd_dev->header.snapc); - - rbd_dev->header.image_size = h.image_size; - rbd_dev->header.snapc = h.snapc; - rbd_dev->header.snap_names = h.snap_names; - rbd_dev->header.snap_sizes = h.snap_sizes; - /* Free the extra copy of the object prefix */ - if (strcmp(rbd_dev->header.object_prefix, h.object_prefix)) - rbd_warn(rbd_dev, "object prefix changed (ignoring)"); - kfree(h.object_prefix); - - up_write(&rbd_dev->header_rwsem); - - return ret; + return rbd_dev_v1_header_read(rbd_dev); } /* @@ -4517,7 +4473,7 @@ static int rbd_dev_v1_probe(struct rbd_device *rbd_dev) /* Populate rbd image metadata */ - ret = rbd_read_header(rbd_dev, &rbd_dev->header); + ret = rbd_dev_v1_header_read(rbd_dev); if (ret < 0) goto out_err; -- cgit v0.10.2 From 30d60ba2f258da24b91edb880338c7178f901de9 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 09:51:30 -0500 Subject: rbd: simplify rbd_dev_v1_probe() An rbd_dev structure's fields are all zero-filled for an initial probe, so there's no need to explicitly zero the parent_spec and parent_overlap fields in rbd_dev_v1_probe(). Removing these assignments makes rbd_dev_v1_probe() *almost* trivial. Move the dout() message that announces discovery of an image into rbd_dev_image_probe(), generalize to support images in either format and only show it if an image is fully discovered. This highlights that are some unnecessary cleanups in the error path for rbd_dev_v1_probe(), so they can be removed. Now rbd_dev_v1_probe() *is* a trivial wrapper function. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index e4586f2..ae22381 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -4469,31 +4469,7 @@ static void rbd_dev_unprobe(struct rbd_device *rbd_dev) static int rbd_dev_v1_probe(struct rbd_device *rbd_dev) { - int ret; - - /* Populate rbd image metadata */ - - ret = rbd_dev_v1_header_read(rbd_dev); - if (ret < 0) - goto out_err; - - /* Version 1 images have no parent (no layering) */ - - rbd_dev->parent_spec = NULL; - rbd_dev->parent_overlap = 0; - - dout("discovered version 1 image, header name is %s\n", - rbd_dev->header_name); - - return 0; - -out_err: - kfree(rbd_dev->header_name); - rbd_dev->header_name = NULL; - kfree(rbd_dev->spec->image_id); - rbd_dev->spec->image_id = NULL; - - return ret; + return rbd_dev_v1_header_read(rbd_dev); } static int rbd_dev_v2_probe(struct rbd_device *rbd_dev) @@ -4553,9 +4529,6 @@ static int rbd_dev_v2_probe(struct rbd_device *rbd_dev) if (ret) goto out_err; - dout("discovered version 2 image, header name is %s\n", - rbd_dev->header_name); - return 0; out_err: rbd_dev->parent_overlap = 0; @@ -4758,9 +4731,13 @@ static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool read_only) rbd_dev->mapping.read_only = read_only; ret = rbd_dev_probe_parent(rbd_dev); - if (!ret) - return 0; + if (ret) + goto err_out_probe; + + dout("discovered format %u image, header name is %s\n", + rbd_dev->image_format, rbd_dev->header_name); + return 0; err_out_probe: rbd_dev_unprobe(rbd_dev); err_out_watch: -- cgit v0.10.2 From 99a41ebcee1a1ea0463b1b29d2e888de21a60c66 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 09:51:30 -0500 Subject: rbd: get rid of trivial v1 header wrappers Get rid of the trivial wrapper functions rbd_dev_v1_refresh() and rbd_dev_v1_probe(), substituting rbd_dev_v1_header_read() calls in their place. Rename rbd_dev_v1_header_read() to be rbd_dev_v1_header_info(), to be more generic (it will better reflect what happens with format 2 images). Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index ae22381..6748fe2 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -788,7 +788,7 @@ static int rbd_header_from_disk(struct rbd_device *rbd_dev, * Copy the names, and fill in each snapshot's id * and size. * - * Note that rbd_dev_v1_header_read() guarantees the + * Note that rbd_dev_v1_header_info() guarantees the * ondisk buffer we're working with has * snap_names_len bytes beyond the end of the * snapshot id array, this memcpy() is safe. @@ -3050,7 +3050,7 @@ out: * return, the rbd_dev->header field will contain up-to-date * information about the image. */ -static int rbd_dev_v1_header_read(struct rbd_device *rbd_dev) +static int rbd_dev_v1_header_info(struct rbd_device *rbd_dev) { struct rbd_image_header_ondisk *ondisk = NULL; u32 snap_count = 0; @@ -3106,14 +3106,6 @@ out: } /* - * only read the first part of the ondisk header, without the snaps info - */ -static int rbd_dev_v1_refresh(struct rbd_device *rbd_dev) -{ - return rbd_dev_v1_header_read(rbd_dev); -} - -/* * Clear the rbd device's EXISTS flag if the snapshot it's mapped to * has disappeared from the (just updated) snapshot context. */ @@ -3141,7 +3133,7 @@ static int rbd_dev_refresh(struct rbd_device *rbd_dev) mapping_size = rbd_dev->mapping.size; mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); if (rbd_dev->image_format == 1) - ret = rbd_dev_v1_refresh(rbd_dev); + ret = rbd_dev_v1_header_info(rbd_dev); else ret = rbd_dev_v2_refresh(rbd_dev); @@ -4467,11 +4459,6 @@ static void rbd_dev_unprobe(struct rbd_device *rbd_dev) memset(header, 0, sizeof (*header)); } -static int rbd_dev_v1_probe(struct rbd_device *rbd_dev) -{ - return rbd_dev_v1_header_read(rbd_dev); -} - static int rbd_dev_v2_probe(struct rbd_device *rbd_dev) { int ret; @@ -4714,7 +4701,7 @@ static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool read_only) goto out_header_name; if (rbd_dev->image_format == 1) - ret = rbd_dev_v1_probe(rbd_dev); + ret = rbd_dev_v1_header_info(rbd_dev); else ret = rbd_dev_v2_probe(rbd_dev); if (ret) -- cgit v0.10.2 From 2df3fac75851dc4257b90dc72fdd3cf27ba177bc Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 09:51:30 -0500 Subject: rbd: define rbd_dev_v2_header_info() This rearranges rbd_dev_v2_refresh() so it works more like rbd_dev_v1_header_info(). While format 1 images need to read the whole header object to get any information, format 2 can collect almost all information selectively. So the one-time initialization will remain in a separate function--based on rbd_dev_v2_probe(). Rename rbd_dev_v2_refresh() to be rbd_dev_v2_header_info(), and have it call rbd_dev_v2_header_onetime() if it's being called for the first time for the given rbd device. Rename rbd_dev_v2_probe() to be rbd_dev_v2_header_onetime() and remove the image size and snapshot context calls it held in common with the refresh function. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 6748fe2..0d874a5 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -425,7 +425,8 @@ static void rbd_img_parent_read(struct rbd_obj_request *obj_request); static void rbd_dev_remove_parent(struct rbd_device *rbd_dev); static int rbd_dev_refresh(struct rbd_device *rbd_dev); -static int rbd_dev_v2_refresh(struct rbd_device *rbd_dev); +static int rbd_dev_v2_header_onetime(struct rbd_device *rbd_dev); +static int rbd_dev_v2_header_info(struct rbd_device *rbd_dev); static const char *rbd_dev_v2_snap_name(struct rbd_device *rbd_dev, u64 snap_id); static int _rbd_dev_v2_snap_size(struct rbd_device *rbd_dev, u64 snap_id, @@ -3135,7 +3136,7 @@ static int rbd_dev_refresh(struct rbd_device *rbd_dev) if (rbd_dev->image_format == 1) ret = rbd_dev_v1_header_info(rbd_dev); else - ret = rbd_dev_v2_refresh(rbd_dev); + ret = rbd_dev_v2_header_info(rbd_dev); /* If it's a mapped snapshot, validate its EXISTS flag */ @@ -4005,12 +4006,19 @@ out: return snap_name; } -static int rbd_dev_v2_refresh(struct rbd_device *rbd_dev) +static int rbd_dev_v2_header_info(struct rbd_device *rbd_dev) { + bool first_time = rbd_dev->header.object_prefix == NULL; int ret; down_write(&rbd_dev->header_rwsem); + if (first_time) { + ret = rbd_dev_v2_header_onetime(rbd_dev); + if (ret) + goto out; + } + ret = rbd_dev_v2_image_size(rbd_dev); if (ret) goto out; @@ -4459,22 +4467,18 @@ static void rbd_dev_unprobe(struct rbd_device *rbd_dev) memset(header, 0, sizeof (*header)); } -static int rbd_dev_v2_probe(struct rbd_device *rbd_dev) +static int rbd_dev_v2_header_onetime(struct rbd_device *rbd_dev) { int ret; - ret = rbd_dev_v2_image_size(rbd_dev); - if (ret) - goto out_err; - - /* Get the object prefix (a.k.a. block_name) for the image */ - ret = rbd_dev_v2_object_prefix(rbd_dev); if (ret) goto out_err; - /* Get the and check features for the image */ - + /* + * Get the and check features for the image. Currently the + * features are assumed to never change. + */ ret = rbd_dev_v2_features(rbd_dev); if (ret) goto out_err; @@ -4504,17 +4508,7 @@ static int rbd_dev_v2_probe(struct rbd_device *rbd_dev) if (ret < 0) goto out_err; } - - /* crypto and compression type aren't (yet) supported for v2 images */ - - rbd_dev->header.crypt_type = 0; - rbd_dev->header.comp_type = 0; - - /* Get the snapshot context, plus the header version */ - - ret = rbd_dev_v2_snap_context(rbd_dev); - if (ret) - goto out_err; + /* No support for crypto and compression type format 2 images */ return 0; out_err: @@ -4703,7 +4697,7 @@ static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool read_only) if (rbd_dev->image_format == 1) ret = rbd_dev_v1_header_info(rbd_dev); else - ret = rbd_dev_v2_probe(rbd_dev); + ret = rbd_dev_v2_header_info(rbd_dev); if (ret) goto err_out_watch; -- cgit v0.10.2 From c2b93e0699723700f886ce17bb65ffd771195a6d Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Tue, 7 May 2013 11:28:31 -0400 Subject: cifs: only set ops for inodes in I_NEW state It's generally not safe to reset the inode ops once they've been set. In the case where the inode was originally thought to be a directory and then later found to be a DFS referral, this can lead to an oops when we try to trigger an inode op on it after changing the ops to the blank referral operations. Cc: Reported-and-Tested-by: Sachin Prabhu Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index fc30251..20efd81 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -171,7 +171,8 @@ cifs_fattr_to_inode(struct inode *inode, struct cifs_fattr *fattr) if (fattr->cf_flags & CIFS_FATTR_DFS_REFERRAL) inode->i_flags |= S_AUTOMOUNT; - cifs_set_ops(inode); + if (inode->i_state & I_NEW) + cifs_set_ops(inode); } void -- cgit v0.10.2 From 91c6febb3817be576785ef06aeaaa8ed423e0a2a Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 17:40:32 -0500 Subject: rbd: fix an incorrect assertion condition In rbd_img_obj_parent_read_full_callback() there is an assertion intended to verify the size of the image request for a full parent read was the size of the original request's target object. But assertion was looking at the parent image order rather than the original one, and these values can differ. Fix that. This resolves: http://tracker.ceph.com/issues/4938 Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 0d874a5..15ac2a5 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -2186,13 +2186,13 @@ rbd_img_obj_parent_read_full_callback(struct rbd_img_request *img_request) result = img_request->result; obj_size = img_request->length; xferred = img_request->xferred; + rbd_img_request_put(img_request); - rbd_dev = img_request->rbd_dev; + rbd_assert(orig_request->img_request); + rbd_dev = orig_request->img_request->rbd_dev; rbd_assert(rbd_dev); rbd_assert(obj_size == (u64)1 << rbd_dev->header.obj_order); - rbd_img_request_put(img_request); - if (result) goto out_err; -- cgit v0.10.2 From 5b2ab72d367d2682c1a237448fbc1595881a88fa Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 17:40:33 -0500 Subject: rbd: support reading parent page data Currently, rbd_img_parent_read() assumes the incoming object request contains bio data. But if a layered image is part of a multi-layer stack of images it will result in read requests of page data to parent images. Fortunately, it's not hard to add support for page data. This resolves: http://tracker.ceph.com/issues/4939 Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 15ac2a5..2a0e9b8 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -2574,7 +2574,7 @@ static void rbd_img_parent_read(struct rbd_obj_request *obj_request) rbd_assert(obj_request_img_data_test(obj_request)); rbd_assert(obj_request->img_request != NULL); rbd_assert(obj_request->result == (s32) -ENOENT); - rbd_assert(obj_request->type == OBJ_REQUEST_BIO); + rbd_assert(obj_request_type_valid(obj_request->type)); rbd_dev = obj_request->img_request->rbd_dev; rbd_assert(rbd_dev->parent != NULL); @@ -2590,8 +2590,12 @@ static void rbd_img_parent_read(struct rbd_obj_request *obj_request) rbd_obj_request_get(obj_request); img_request->obj_request = obj_request; - result = rbd_img_request_fill(img_request, OBJ_REQUEST_BIO, - obj_request->bio_list); + if (obj_request->type == OBJ_REQUEST_BIO) + result = rbd_img_request_fill(img_request, OBJ_REQUEST_BIO, + obj_request->bio_list); + else + result = rbd_img_request_fill(img_request, OBJ_REQUEST_PAGES, + obj_request->pages); if (result) goto out_err; -- cgit v0.10.2 From 7ce4eef7b5fad73b365b7e4b8892af3af72d4bd3 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 17:40:33 -0500 Subject: rbd: set mapping read-only flag in rbd_add() The rbd_dev->mapping field for a parent image is not meaningful. Since rbd_image_probe() is used both for images being mapped and their parents, it doesn't make sense to set that flag in that function. So move the setting of the mapping.read_only flag out of rbd_dev_image_probe() and into rbd_add() instead. This resolves: http://tracker.ceph.com/issues/4940 Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 2a0e9b8..dbfc44a 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -358,7 +358,7 @@ static ssize_t rbd_add(struct bus_type *bus, const char *buf, size_t count); static ssize_t rbd_remove(struct bus_type *bus, const char *buf, size_t count); -static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool read_only); +static int rbd_dev_image_probe(struct rbd_device *rbd_dev); static struct bus_attribute rbd_bus_attrs[] = { __ATTR(add, S_IWUSR, NULL, rbd_add), @@ -4549,7 +4549,7 @@ static int rbd_dev_probe_parent(struct rbd_device *rbd_dev) if (!parent) goto out_err; - ret = rbd_dev_image_probe(parent, true); + ret = rbd_dev_image_probe(parent); if (ret < 0) goto out_err; rbd_dev->parent = parent; @@ -4671,10 +4671,9 @@ static void rbd_dev_image_release(struct rbd_device *rbd_dev) /* * Probe for the existence of the header object for the given rbd - * device. For format 2 images this includes determining the image - * id. + * device. */ -static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool read_only) +static int rbd_dev_image_probe(struct rbd_device *rbd_dev) { int ret; int tmp; @@ -4709,12 +4708,6 @@ static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool read_only) if (ret) goto err_out_probe; - /* If we are mapping a snapshot it must be marked read-only */ - - if (rbd_dev->spec->snap_id != CEPH_NOSNAP) - read_only = true; - rbd_dev->mapping.read_only = read_only; - ret = rbd_dev_probe_parent(rbd_dev); if (ret) goto err_out_probe; @@ -4795,10 +4788,16 @@ static ssize_t rbd_add(struct bus_type *bus, rbdc = NULL; /* rbd_dev now owns this */ spec = NULL; /* rbd_dev now owns this */ - rc = rbd_dev_image_probe(rbd_dev, read_only); + rc = rbd_dev_image_probe(rbd_dev); if (rc < 0) goto err_out_rbd_dev; + /* If we are mapping a snapshot it must be marked read-only */ + + if (rbd_dev->spec->snap_id != CEPH_NOSNAP) + read_only = true; + rbd_dev->mapping.read_only = read_only; + rc = rbd_dev_device_setup(rbd_dev); if (!rc) return count; -- cgit v0.10.2 From 1f3ef78861ac4b510175e177899b9b5ba4bbed91 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 17:40:33 -0500 Subject: rbd: only set up watch for mapped images Any changes to parent images are immaterial to any mapped clone. So there is no need to have a watch event registered on header objects except for the header object of an image that is mapped. In fact, a watch request is a write operation, and we may only have read access to a parent image. We can't set up the watch request until we know the name of the header object though. So pass a flag to rbd_dev_image_probe() to indicate whether this probe is for a mapping or for a parent image. Change the second parameter to rbd_dev_header_watch_sync() be Boolean while we're at it. This resolves: http://tracker.ceph.com/issues/4941 Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index dbfc44a..e417704 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -358,7 +358,7 @@ static ssize_t rbd_add(struct bus_type *bus, const char *buf, size_t count); static ssize_t rbd_remove(struct bus_type *bus, const char *buf, size_t count); -static int rbd_dev_image_probe(struct rbd_device *rbd_dev); +static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool mapping); static struct bus_attribute rbd_bus_attrs[] = { __ATTR(add, S_IWUSR, NULL, rbd_add), @@ -2664,7 +2664,7 @@ static void rbd_watch_cb(u64 ver, u64 notify_id, u8 opcode, void *data) * Request sync osd watch/unwatch. The value of "start" determines * whether a watch request is being initiated or torn down. */ -static int rbd_dev_header_watch_sync(struct rbd_device *rbd_dev, int start) +static int rbd_dev_header_watch_sync(struct rbd_device *rbd_dev, bool start) { struct ceph_osd_client *osdc = &rbd_dev->rbd_client->client->osdc; struct rbd_obj_request *obj_request; @@ -2698,7 +2698,7 @@ static int rbd_dev_header_watch_sync(struct rbd_device *rbd_dev, int start) rbd_dev->watch_request->osd_req); osd_req_op_watch_init(obj_request->osd_req, 0, CEPH_OSD_OP_WATCH, - rbd_dev->watch_event->cookie, 0, start); + rbd_dev->watch_event->cookie, 0, start ? 1 : 0); rbd_osd_req_format_write(obj_request); ret = rbd_obj_request_submit(osdc, obj_request); @@ -4549,7 +4549,7 @@ static int rbd_dev_probe_parent(struct rbd_device *rbd_dev) if (!parent) goto out_err; - ret = rbd_dev_image_probe(parent); + ret = rbd_dev_image_probe(parent, false); if (ret < 0) goto out_err; rbd_dev->parent = parent; @@ -4654,12 +4654,7 @@ static int rbd_dev_header_name(struct rbd_device *rbd_dev) static void rbd_dev_image_release(struct rbd_device *rbd_dev) { - int ret; - rbd_dev_unprobe(rbd_dev); - ret = rbd_dev_header_watch_sync(rbd_dev, 0); - if (ret) - rbd_warn(rbd_dev, "failed to cancel watch event (%d)\n", ret); kfree(rbd_dev->header_name); rbd_dev->header_name = NULL; rbd_dev->image_format = 0; @@ -4671,9 +4666,11 @@ static void rbd_dev_image_release(struct rbd_device *rbd_dev) /* * Probe for the existence of the header object for the given rbd - * device. + * device. If this image is the one being mapped (i.e., not a + * parent), initiate a watch on its header object before using that + * object to get detailed information about the rbd image. */ -static int rbd_dev_image_probe(struct rbd_device *rbd_dev) +static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool mapping) { int ret; int tmp; @@ -4693,9 +4690,11 @@ static int rbd_dev_image_probe(struct rbd_device *rbd_dev) if (ret) goto err_out_format; - ret = rbd_dev_header_watch_sync(rbd_dev, 1); - if (ret) - goto out_header_name; + if (mapping) { + ret = rbd_dev_header_watch_sync(rbd_dev, true); + if (ret) + goto out_header_name; + } if (rbd_dev->image_format == 1) ret = rbd_dev_v1_header_info(rbd_dev); @@ -4719,9 +4718,12 @@ static int rbd_dev_image_probe(struct rbd_device *rbd_dev) err_out_probe: rbd_dev_unprobe(rbd_dev); err_out_watch: - tmp = rbd_dev_header_watch_sync(rbd_dev, 0); - if (tmp) - rbd_warn(rbd_dev, "unable to tear down watch request\n"); + if (mapping) { + tmp = rbd_dev_header_watch_sync(rbd_dev, false); + if (tmp) + rbd_warn(rbd_dev, "unable to tear down " + "watch request (%d)\n", tmp); + } out_header_name: kfree(rbd_dev->header_name); rbd_dev->header_name = NULL; @@ -4788,7 +4790,7 @@ static ssize_t rbd_add(struct bus_type *bus, rbdc = NULL; /* rbd_dev now owns this */ spec = NULL; /* rbd_dev now owns this */ - rc = rbd_dev_image_probe(rbd_dev); + rc = rbd_dev_image_probe(rbd_dev, true); if (rc < 0) goto err_out_rbd_dev; @@ -4910,10 +4912,13 @@ static ssize_t rbd_remove(struct bus_type *bus, spin_unlock_irq(&rbd_dev->lock); if (ret < 0) goto done; - ret = count; rbd_bus_del_dev(rbd_dev); + ret = rbd_dev_header_watch_sync(rbd_dev, false); + if (ret) + rbd_warn(rbd_dev, "failed to cancel watch event (%d)\n", ret); rbd_dev_image_release(rbd_dev); module_put(THIS_MODULE); + ret = count; done: mutex_unlock(&ctl_mutex); -- cgit v0.10.2 From c48f3f86e248b1649ad22151dd45ef2610101ed3 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Wed, 8 May 2013 08:49:52 -0500 Subject: rbd: kill rbd_img_request_get() Get rid of rbd_img_request_get(), because it isn't used, and maybe won't ever be needed. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index e417704..51c45e7 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -1357,13 +1357,6 @@ static void rbd_obj_request_put(struct rbd_obj_request *obj_request) kref_put(&obj_request->kref, rbd_obj_request_destroy); } -static void rbd_img_request_get(struct rbd_img_request *img_request) -{ - dout("%s: img %p (was %d)\n", __func__, img_request, - atomic_read(&img_request->kref.refcount)); - kref_get(&img_request->kref); -} - static void rbd_img_request_destroy(struct kref *kref); static void rbd_img_request_put(struct rbd_img_request *img_request) { @@ -1888,9 +1881,6 @@ static struct rbd_img_request *rbd_img_request_create( INIT_LIST_HEAD(&img_request->obj_requests); kref_init(&img_request->kref); - rbd_img_request_get(img_request); /* Avoid a warning */ - rbd_img_request_put(img_request); /* TEMPORARY */ - dout("%s: rbd_dev %p %s %llu/%llu -> img %p\n", __func__, rbd_dev, write_request ? "write" : "read", offset, length, img_request); -- cgit v0.10.2 From 074d72ff57f65de779e2f70d5906964c0ba1c123 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 8 May 2013 12:13:03 -0400 Subject: x86/microcode: Add local mutex to fix physical CPU hot-add deadlock This can easily be triggered if a new CPU is added (via ACPI hotplug mechanism) and from user-space you do: echo 1 > /sys/devices/system/cpu/cpu3/online (or wait for UDEV to do it) on a newly appeared physical CPU. The deadlock is that the "store_online" in drivers/base/cpu.c takes the cpu_hotplug_driver_lock() lock, then calls "cpu_up". "cpu_up" eventually ends up calling "save_mc_for_early" which also takes the cpu_hotplug_driver_lock() lock. And here is that lockdep thinks of it: smpboot: Stack at about ffff880075c39f44 smpboot: CPU3: has booted. microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x25 ============================================= [ INFO: possible recursive locking detected ] 3.9.0upstream-10129-g167af0e #1 Not tainted --------------------------------------------- sh/2487 is trying to acquire lock: (x86_cpu_hotplug_driver_mutex){+.+.+.}, at: [] cpu_hotplug_driver_lock+0x12/0x20 but task is already holding lock: (x86_cpu_hotplug_driver_mutex){+.+.+.}, at: [] cpu_hotplug_driver_lock+0x12/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(x86_cpu_hotplug_driver_mutex); lock(x86_cpu_hotplug_driver_mutex); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by sh/2487: #0: (sb_writers#5){.+.+.+}, at: [] vfs_write+0x17d/0x190 #1: (&buffer->mutex){+.+.+.}, at: [] sysfs_write_file+0x3f/0x160 #2: (s_active#20){.+.+.+}, at: [] sysfs_write_file+0xc8/0x160 #3: (x86_cpu_hotplug_driver_mutex){+.+.+.}, at: [] cpu_hotplug_driver_lock+0x12/0x20 #4: (cpu_add_remove_lock){+.+.+.}, at: [] cpu_maps_update_begin+0x12/0x20 #5: (cpu_hotplug.lock){+.+.+.}, at: [] cpu_hotplug_begin+0x27/0x60 Suggested-and-Acked-by: Borislav Petkov Signed-off-by: Konrad Rzeszutek Wilk Cc: fenghua.yu@intel.com Cc: xen-devel@lists.xensource.com Cc: stable@vger.kernel.org # for v3.9 Link: http://lkml.kernel.org/r/1368029583-23337-1-git-send-email-konrad.wilk@oracle.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/microcode_intel_early.c b/arch/x86/kernel/microcode_intel_early.c index d893e8e..2e9e128 100644 --- a/arch/x86/kernel/microcode_intel_early.c +++ b/arch/x86/kernel/microcode_intel_early.c @@ -487,6 +487,7 @@ static inline void show_saved_mc(void) #endif #if defined(CONFIG_MICROCODE_INTEL_EARLY) && defined(CONFIG_HOTPLUG_CPU) +static DEFINE_MUTEX(x86_cpu_microcode_mutex); /* * Save this mc into mc_saved_data. So it will be loaded early when a CPU is * hot added or resumes. @@ -507,7 +508,7 @@ int save_mc_for_early(u8 *mc) * Hold hotplug lock so mc_saved_data is not accessed by a CPU in * hotplug. */ - cpu_hotplug_driver_lock(); + mutex_lock(&x86_cpu_microcode_mutex); mc_saved_count_init = mc_saved_data.mc_saved_count; mc_saved_count = mc_saved_data.mc_saved_count; @@ -544,7 +545,7 @@ int save_mc_for_early(u8 *mc) } out: - cpu_hotplug_driver_unlock(); + mutex_unlock(&x86_cpu_microcode_mutex); return ret; } -- cgit v0.10.2 From 293c9c1cef6be46ad72b528fa79c3ff034551fe0 Mon Sep 17 00:00:00 2001 From: Marek Lindner Date: Sat, 27 Apr 2013 16:22:28 +0800 Subject: batman-adv: check proto length before accessing proto string buffer batadv_param_set_ra() strips the trailing '\n' from the supplied string buffer without checking the length of the buffer first. This patches avoids random memory access and associated potential crashes. Reported-by: Sasha Levin Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli diff --git a/net/batman-adv/main.c b/net/batman-adv/main.c index 3e30a0f..9c620cd 100644 --- a/net/batman-adv/main.c +++ b/net/batman-adv/main.c @@ -475,7 +475,7 @@ static int batadv_param_set_ra(const char *val, const struct kernel_param *kp) char *algo_name = (char *)val; size_t name_len = strlen(algo_name); - if (algo_name[name_len - 1] == '\n') + if (name_len > 0 && algo_name[name_len - 1] == '\n') algo_name[name_len - 1] = '\0'; bat_algo_ops = batadv_algo_get(algo_name); -- cgit v0.10.2 From 7da19971a9da9c5e63d259c9a8a566f071dc95d0 Mon Sep 17 00:00:00 2001 From: Marek Lindner Date: Tue, 7 May 2013 19:25:02 +0800 Subject: batman-adv: check return value of pskb_trim_rcsum() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Reported-by: Sven Eckelmann Signed-off-by: Marek Lindner Acked-by: Martin Hundebøll Signed-off-by: Antonio Quartulli diff --git a/net/batman-adv/network-coding.c b/net/batman-adv/network-coding.c index f7c5430..e84629e 100644 --- a/net/batman-adv/network-coding.c +++ b/net/batman-adv/network-coding.c @@ -1514,6 +1514,7 @@ batadv_nc_skb_decode_packet(struct batadv_priv *bat_priv, struct sk_buff *skb, struct ethhdr *ethhdr, ethhdr_tmp; uint8_t *orig_dest, ttl, ttvn; unsigned int coding_len; + int err; /* Save headers temporarily */ memcpy(&coded_packet_tmp, skb->data, sizeof(coded_packet_tmp)); @@ -1568,8 +1569,11 @@ batadv_nc_skb_decode_packet(struct batadv_priv *bat_priv, struct sk_buff *skb, coding_len); /* Resize decoded skb if decoded with larger packet */ - if (nc_packet->skb->len > coding_len + h_size) - pskb_trim_rcsum(skb, coding_len + h_size); + if (nc_packet->skb->len > coding_len + h_size) { + err = pskb_trim_rcsum(skb, coding_len + h_size); + if (err) + return NULL; + } /* Create decoded unicast packet */ unicast_packet = (struct batadv_unicast_packet *)skb->data; -- cgit v0.10.2 From 88e48d7b3340ef07b108eb8a8b3813dd093cc7f7 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Thu, 9 May 2013 09:35:45 +0200 Subject: batman-adv: make DAT drop ARP requests targeting local clients In the outgoing ARP request snooping routine in DAT, ARP Request sent by local clients which are supposed to be replied by other local clients can be silently dropped. The destination host will reply by itself through the LAN and therefore there is no need to involve DAT. Reported-by: Carlos Quijano Signed-off-by: Antonio Quartulli Tested-by: Carlos Quijano Signed-off-by: Marek Lindner diff --git a/net/batman-adv/distributed-arp-table.c b/net/batman-adv/distributed-arp-table.c index 8e15d96..2399920 100644 --- a/net/batman-adv/distributed-arp-table.c +++ b/net/batman-adv/distributed-arp-table.c @@ -837,6 +837,19 @@ bool batadv_dat_snoop_outgoing_arp_request(struct batadv_priv *bat_priv, dat_entry = batadv_dat_entry_hash_find(bat_priv, ip_dst); if (dat_entry) { + /* If the ARP request is destined for a local client the local + * client will answer itself. DAT would only generate a + * duplicate packet. + * + * Moreover, if the soft-interface is enslaved into a bridge, an + * additional DAT answer may trigger kernel warnings about + * a packet coming from the wrong port. + */ + if (batadv_is_my_client(bat_priv, dat_entry->mac_addr)) { + ret = true; + goto out; + } + skb_new = arp_create(ARPOP_REPLY, ETH_P_ARP, ip_src, bat_priv->soft_iface, ip_dst, hw_src, dat_entry->mac_addr, hw_src); -- cgit v0.10.2 From a4361860351e87876aebd9595906d928ce8572c6 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Tue, 7 May 2013 01:06:18 +0200 Subject: batman-adv: reorder clean up routine in order to avoid race conditions nc_worker accesses the originator table during its periodic work, but since the originator table is freed before stopping the worker this leads to a global protection fault. Fix this by killing the worker (in nc_free) before freeing the originator table. Moreover tidy up the entire clean up routine by running all the subcomponents freeing procedures first and then killing the TT and the originator tables at the end. Signed-off-by: Antonio Quartulli Signed-off-by: Marek Lindner diff --git a/net/batman-adv/main.c b/net/batman-adv/main.c index 9c620cd..1240f07 100644 --- a/net/batman-adv/main.c +++ b/net/batman-adv/main.c @@ -163,14 +163,22 @@ void batadv_mesh_free(struct net_device *soft_iface) batadv_vis_quit(bat_priv); batadv_gw_node_purge(bat_priv); - batadv_originator_free(bat_priv); batadv_nc_free(bat_priv); + batadv_dat_free(bat_priv); + batadv_bla_free(bat_priv); + /* Free the TT and the originator tables only after having terminated + * all the other depending components which may use these structures for + * their purposes. + */ batadv_tt_free(bat_priv); - batadv_bla_free(bat_priv); - - batadv_dat_free(bat_priv); + /* Since the originator table clean up routine is accessing the TT + * tables as well, it has to be invoked after the TT tables have been + * freed and marked as empty. This ensures that no cleanup RCU callbacks + * accessing the TT data are scheduled for later execution. + */ + batadv_originator_free(bat_priv); free_percpu(bat_priv->bat_counters); -- cgit v0.10.2 From 61559af111e41761f5f4f20ce0897345eb59076e Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 9 May 2013 21:14:20 +0800 Subject: ASoC: da7213: Fix setting dmic_samplephase and dmic_clk_rate When set dmic_samplephase and dmic_clk_rate bits for dmic_cfg, current code checks pdata->dmic_data_sel which is wrong. Signed-off-by: Axel Lin Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/sound/soc/codecs/da7213.c b/sound/soc/codecs/da7213.c index 41230ad..4a6f1da 100644 --- a/sound/soc/codecs/da7213.c +++ b/sound/soc/codecs/da7213.c @@ -1488,17 +1488,17 @@ static int da7213_probe(struct snd_soc_codec *codec) DA7213_DMIC_DATA_SEL_SHIFT); break; } - switch (pdata->dmic_data_sel) { + switch (pdata->dmic_samplephase) { case DA7213_DMIC_SAMPLE_ON_CLKEDGE: case DA7213_DMIC_SAMPLE_BETWEEN_CLKEDGE: - dmic_cfg |= (pdata->dmic_data_sel << + dmic_cfg |= (pdata->dmic_samplephase << DA7213_DMIC_SAMPLEPHASE_SHIFT); break; } - switch (pdata->dmic_data_sel) { + switch (pdata->dmic_clk_rate) { case DA7213_DMIC_CLK_3_0MHZ: case DA7213_DMIC_CLK_1_5MHZ: - dmic_cfg |= (pdata->dmic_data_sel << + dmic_cfg |= (pdata->dmic_clk_rate << DA7213_DMIC_CLK_RATE_SHIFT); break; } -- cgit v0.10.2 From 97fbfbf40b678b95551276e9413517ba7858dba7 Mon Sep 17 00:00:00 2001 From: Damien Lespiau Date: Wed, 8 May 2013 17:03:30 +0100 Subject: drm: Add missing break in the command line mode parsing code As we parse the string given on the command line one char at a time, it seems that we do want a break at every case. Signed-off-by: Damien Lespiau Reviewed-by: Rodrigo Vivi Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index f264d08..7a83836 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -1143,6 +1143,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option, was_digit = false; } else goto done; + break; case '0' ... '9': was_digit = true; break; -- cgit v0.10.2 From ebbd97ad885c3c41f56a5f81c27b1ea8156a0f07 Mon Sep 17 00:00:00 2001 From: Damien Lespiau Date: Wed, 8 May 2013 17:03:32 +0100 Subject: drm: Don't prune modes loudly when a connector is disconnected drm_helper_probe_single_connector_modes() is responsible for pruning the previously detected modes on a disconnected connector. We don't really need to log, again, the full list of modes that used to be valid when connected. Signed-off-by: Damien Lespiau Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index e974f93..62f45ad 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -121,6 +121,7 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector, connector->helper_private; int count = 0; int mode_flags = 0; + bool verbose_prune = true; DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id, drm_get_connector_name(connector)); @@ -149,6 +150,7 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector, DRM_DEBUG_KMS("[CONNECTOR:%d:%s] disconnected\n", connector->base.id, drm_get_connector_name(connector)); drm_mode_connector_update_edid_property(connector, NULL); + verbose_prune = false; goto prune; } @@ -182,7 +184,7 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector, } prune: - drm_mode_prune_invalid(dev, &connector->modes, true); + drm_mode_prune_invalid(dev, &connector->modes, verbose_prune); if (list_empty(&connector->modes)) return 0; -- cgit v0.10.2 From d1fd3ddc469b576e36184f2bd02c0301d80118d3 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Tue, 7 May 2013 12:32:16 -0700 Subject: drm: refactor call to request_module This reduces the size of the stack frame when calling request_module(). Performing the sprintf before the call is not needed. Signed-off-by: Kees Cook Acked-by: Paul Menzel Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_encoder_slave.c b/drivers/gpu/drm/drm_encoder_slave.c index 48c52f7..0cfb60f 100644 --- a/drivers/gpu/drm/drm_encoder_slave.c +++ b/drivers/gpu/drm/drm_encoder_slave.c @@ -54,16 +54,12 @@ int drm_i2c_encoder_init(struct drm_device *dev, struct i2c_adapter *adap, const struct i2c_board_info *info) { - char modalias[sizeof(I2C_MODULE_PREFIX) - + I2C_NAME_SIZE]; struct module *module = NULL; struct i2c_client *client; struct drm_i2c_encoder_driver *encoder_drv; int err = 0; - snprintf(modalias, sizeof(modalias), - "%s%s", I2C_MODULE_PREFIX, info->type); - request_module(modalias); + request_module("%s%s", I2C_MODULE_PREFIX, info->type); client = i2c_new_device(adap, info); if (!client) { -- cgit v0.10.2 From 54afc1214133deddd49162b101971af5711f1b3a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Wed, 8 May 2013 16:38:33 +0300 Subject: drm: Add kernel-doc for drm_fb_helper_funcs->initial_config MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Ville Syrjälä Signed-off-by: Dave Airlie diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h index 8230b46..61ebd51 100644 --- a/include/drm/drm_fb_helper.h +++ b/include/drm/drm_fb_helper.h @@ -57,6 +57,7 @@ struct drm_fb_helper_surface_size { * @fb_probe: - Driver callback to allocate and initialize the fbdev info * structure. Futhermore it also needs to allocate the drm * framebuffer used to back the fbdev. + * @initial_config: - Setup an initial fbdev display configuration * * Driver callbacks used by the fbdev emulation helper library. */ -- cgit v0.10.2 From 7b97936f298af7991ca4717a4c23610d9ecd8927 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Wed, 8 May 2013 16:38:34 +0300 Subject: drm: Remove pointless '-' characters from drm_fb_helper documentation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Ville Syrjälä Signed-off-by: Dave Airlie diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h index 61ebd51..471f276 100644 --- a/include/drm/drm_fb_helper.h +++ b/include/drm/drm_fb_helper.h @@ -50,14 +50,14 @@ struct drm_fb_helper_surface_size { /** * struct drm_fb_helper_funcs - driver callbacks for the fbdev emulation library - * @gamma_set: - Set the given gamma lut register on the given crtc. - * @gamma_get: - Read the given gamma lut register on the given crtc, used to - * save the current lut when force-restoring the fbdev for e.g. - * kdbg. - * @fb_probe: - Driver callback to allocate and initialize the fbdev info - * structure. Futhermore it also needs to allocate the drm - * framebuffer used to back the fbdev. - * @initial_config: - Setup an initial fbdev display configuration + * @gamma_set: Set the given gamma lut register on the given crtc. + * @gamma_get: Read the given gamma lut register on the given crtc, used to + * save the current lut when force-restoring the fbdev for e.g. + * kdbg. + * @fb_probe: Driver callback to allocate and initialize the fbdev info + * structure. Futhermore it also needs to allocate the drm + * framebuffer used to back the fbdev. + * @initial_config: Setup an initial fbdev display configuration * * Driver callbacks used by the fbdev emulation helper library. */ -- cgit v0.10.2 From b9434d0f162c351e02e0e8f66ca6b75a67595537 Mon Sep 17 00:00:00 2001 From: Chris Cummins Date: Thu, 9 May 2013 14:20:40 +0100 Subject: drm: Use names of ioctls in debug traces MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The intention here is to make the output of dmesg with full verbosity a bit easier for a human to parse. This commit transforms: [drm:drm_ioctl], pid=699, cmd=0x6458, nr=0x58, dev 0xe200, auth=1 [drm:drm_ioctl], pid=699, cmd=0xc010645b, nr=0x5b, dev 0xe200, auth=1 [drm:drm_ioctl], pid=699, cmd=0xc0106461, nr=0x61, dev 0xe200, auth=1 [drm:drm_ioctl], pid=699, cmd=0xc01c64ae, nr=0xae, dev 0xe200, auth=1 [drm:drm_mode_addfb], [FB:32] [drm:drm_ioctl], pid=699, cmd=0xc0106464, nr=0x64, dev 0xe200, auth=1 [drm:drm_vm_open_locked], 0x7fd9302fe000,0x00a00000 [drm:drm_ioctl], pid=699, cmd=0x400c645f, nr=0x5f, dev 0xe200, auth=1 [drm:drm_ioctl], pid=699, cmd=0xc00464af, nr=0xaf, dev 0xe200, auth=1 [drm:intel_crtc_set_config], [CRTC:3] [NOFB] into: [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, I915_GEM_THROTTLE [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, I915_GEM_CREATE [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, I915_GEM_SET_TILING [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, IOCTL_MODE_ADDFB [drm:drm_mode_addfb], [FB:32] [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, I915_GEM_MMAP_GTT [drm:drm_vm_open_locked], 0x7fd9302fe000,0x00a00000 [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, I915_GEM_SET_DOMAIN [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, DRM_IOCTL_MODE_RMFB [drm:intel_crtc_set_config], [CRTC:3] [NOFB] v2: drm_ioctls is now a constant (Ville Syrjälä) Signed-off-by: Chris Cummins Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index 8d4f290..9cc247f 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -57,7 +57,7 @@ static int drm_version(struct drm_device *dev, void *data, struct drm_file *file_priv); #define DRM_IOCTL_DEF(ioctl, _func, _flags) \ - [DRM_IOCTL_NR(ioctl)] = {.cmd = ioctl, .func = _func, .flags = _flags, .cmd_drv = 0} + [DRM_IOCTL_NR(ioctl)] = {.cmd = ioctl, .func = _func, .flags = _flags, .cmd_drv = 0, .name = #ioctl} /** Ioctl table */ static const struct drm_ioctl_desc drm_ioctls[] = { @@ -375,7 +375,7 @@ long drm_ioctl(struct file *filp, { struct drm_file *file_priv = filp->private_data; struct drm_device *dev; - const struct drm_ioctl_desc *ioctl; + const struct drm_ioctl_desc *ioctl = NULL; drm_ioctl_t *func; unsigned int nr = DRM_IOCTL_NR(cmd); int retcode = -EINVAL; @@ -392,11 +392,6 @@ long drm_ioctl(struct file *filp, atomic_inc(&dev->counts[_DRM_STAT_IOCTLS]); ++file_priv->ioctl_count; - DRM_DEBUG("pid=%d, cmd=0x%02x, nr=0x%02x, dev 0x%lx, auth=%d\n", - task_pid_nr(current), cmd, nr, - (long)old_encode_dev(file_priv->minor->device), - file_priv->authenticated); - if ((nr >= DRM_CORE_IOCTL_COUNT) && ((nr < DRM_COMMAND_BASE) || (nr >= DRM_COMMAND_END))) goto err_i1; @@ -417,6 +412,11 @@ long drm_ioctl(struct file *filp, } else goto err_i1; + DRM_DEBUG("pid=%d, dev=0x%lx, auth=%d, %s\n", + task_pid_nr(current), + (long)old_encode_dev(file_priv->minor->device), + file_priv->authenticated, ioctl->name); + /* Do not trust userspace, use our own definition */ func = ioctl->func; /* is there a local override? */ @@ -471,6 +471,12 @@ long drm_ioctl(struct file *filp, } err_i1: + if (!ioctl) + DRM_DEBUG("invalid iotcl: pid=%d, dev=0x%lx, auth=%d, cmd=0x%02x, nr=0x%02x\n", + task_pid_nr(current), + (long)old_encode_dev(file_priv->minor->device), + file_priv->authenticated, cmd, nr); + if (kdata != stack_kdata) kfree(kdata); atomic_dec(&dev->ioctl_count); diff --git a/include/drm/drmP.h b/include/drm/drmP.h index f1ce786..b092b5b 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -316,6 +316,7 @@ struct drm_ioctl_desc { int flags; drm_ioctl_t *func; unsigned int cmd_drv; + const char *name; }; /** @@ -324,7 +325,7 @@ struct drm_ioctl_desc { */ #define DRM_IOCTL_DEF_DRV(ioctl, _func, _flags) \ - [DRM_IOCTL_NR(DRM_##ioctl)] = {.cmd = DRM_##ioctl, .func = _func, .flags = _flags, .cmd_drv = DRM_IOCTL_##ioctl} + [DRM_IOCTL_NR(DRM_##ioctl)] = {.cmd = DRM_##ioctl, .func = _func, .flags = _flags, .cmd_drv = DRM_IOCTL_##ioctl, .name = #ioctl} struct drm_magic_entry { struct list_head head; -- cgit v0.10.2 From 73ed148aea9dc0508be7e30e7a447f55c1b2f378 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 10 May 2013 16:59:18 +1000 Subject: powerpc/powernv: Improve kexec reliability We add a machine_shutdown hook that frees the OPAL interrupts (so they get masked at the source and don't fire while kexec'ing) and which triggers an IODA reset on all the PCIe host bridges which will have the effect of blocking all DMAs and subsequent PCIs interrupts. Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h index b6c8b58..b2906ad 100644 --- a/arch/powerpc/include/asm/opal.h +++ b/arch/powerpc/include/asm/opal.h @@ -563,6 +563,8 @@ extern void opal_nvram_init(void); extern int opal_machine_check(struct pt_regs *regs); +extern void opal_shutdown(void); + #endif /* __ASSEMBLY__ */ #endif /* __OPAL_H */ diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c index 12d9846..27907cb 100644 --- a/arch/powerpc/platforms/powernv/opal.c +++ b/arch/powerpc/platforms/powernv/opal.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include @@ -28,6 +29,8 @@ struct opal { static struct device_node *opal_node; static DEFINE_SPINLOCK(opal_write_lock); extern u64 opal_mc_secondary_handler[]; +static unsigned int *opal_irqs; +static unsigned int opal_irq_count; int __init early_init_dt_scan_opal(unsigned long node, const char *uname, int depth, void *data) @@ -323,6 +326,8 @@ static int __init opal_init(void) irqs = of_get_property(opal_node, "opal-interrupts", &irqlen); pr_debug("opal: Found %d interrupts reserved for OPAL\n", irqs ? (irqlen / 4) : 0); + opal_irq_count = irqlen / 4; + opal_irqs = kzalloc(opal_irq_count * sizeof(unsigned int), GFP_KERNEL); for (i = 0; irqs && i < (irqlen / 4); i++, irqs++) { unsigned int hwirq = be32_to_cpup(irqs); unsigned int irq = irq_create_mapping(NULL, hwirq); @@ -334,7 +339,19 @@ static int __init opal_init(void) if (rc) pr_warning("opal: Error %d requesting irq %d" " (0x%x)\n", rc, irq, hwirq); + opal_irqs[i] = irq; } return 0; } subsys_initcall(opal_init); + +void opal_shutdown(void) +{ + unsigned int i; + + for (i = 0; i < opal_irq_count; i++) { + if (opal_irqs[i]) + free_irq(opal_irqs[i], 0); + opal_irqs[i] = 0; + } +} diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index 1da578b..3937aaa 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -1048,6 +1048,12 @@ static u32 pnv_ioda_bdfn_to_pe(struct pnv_phb *phb, struct pci_bus *bus, return phb->ioda.pe_rmap[(bus->number << 8) | devfn]; } +static void pnv_pci_ioda_shutdown(struct pnv_phb *phb) +{ + opal_pci_reset(phb->opal_id, OPAL_PCI_IODA_TABLE_RESET, + OPAL_ASSERT_RESET); +} + void __init pnv_pci_init_ioda_phb(struct device_node *np, int ioda_type) { struct pci_controller *hose; @@ -1178,6 +1184,9 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np, int ioda_type) /* Setup TCEs */ phb->dma_dev_setup = pnv_pci_ioda_dma_dev_setup; + /* Setup shutdown function for kexec */ + phb->shutdown = pnv_pci_ioda_shutdown; + /* Setup MSI support */ pnv_pci_init_ioda_msis(phb); diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c index 55dfca844..163bd74 100644 --- a/arch/powerpc/platforms/powernv/pci.c +++ b/arch/powerpc/platforms/powernv/pci.c @@ -450,6 +450,18 @@ static void pnv_pci_dma_dev_setup(struct pci_dev *pdev) pnv_pci_dma_fallback_setup(hose, pdev); } +void pnv_pci_shutdown(void) +{ + struct pci_controller *hose; + + list_for_each_entry(hose, &hose_list, list_node) { + struct pnv_phb *phb = hose->private_data; + + if (phb && phb->shutdown) + phb->shutdown(phb); + } +} + /* Fixup wrong class code in p7ioc and p8 root complex */ static void pnv_p7ioc_rc_quirk(struct pci_dev *dev) { diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h index 48dc4bb..25d76c4 100644 --- a/arch/powerpc/platforms/powernv/pci.h +++ b/arch/powerpc/platforms/powernv/pci.h @@ -86,6 +86,7 @@ struct pnv_phb { void (*dma_dev_setup)(struct pnv_phb *phb, struct pci_dev *pdev); void (*fixup_phb)(struct pci_controller *hose); u32 (*bdfn_to_pe)(struct pnv_phb *phb, struct pci_bus *bus, u32 devfn); + void (*shutdown)(struct pnv_phb *phb); union { struct { @@ -158,4 +159,5 @@ extern void pnv_pci_init_ioda_hub(struct device_node *np); extern void pnv_pci_init_ioda2_phb(struct device_node *np); extern void pnv_pci_ioda_tce_invalidate(struct iommu_table *tbl, u64 *startp, u64 *endp); + #endif /* __POWERNV_PCI_H */ diff --git a/arch/powerpc/platforms/powernv/powernv.h b/arch/powerpc/platforms/powernv/powernv.h index 8a9df7f..a1c6f83 100644 --- a/arch/powerpc/platforms/powernv/powernv.h +++ b/arch/powerpc/platforms/powernv/powernv.h @@ -9,8 +9,10 @@ static inline void pnv_smp_init(void) { } #ifdef CONFIG_PCI extern void pnv_pci_init(void); +extern void pnv_pci_shutdown(void); #else static inline void pnv_pci_init(void) { } +static inline void pnv_pci_shutdown(void) { } #endif #endif /* _POWERNV_H */ diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c index db1ad1c..c20381c 100644 --- a/arch/powerpc/platforms/powernv/setup.c +++ b/arch/powerpc/platforms/powernv/setup.c @@ -126,6 +126,17 @@ static void pnv_progress(char *s, unsigned short hex) { } +static void pnv_shutdown(void) +{ + /* Let the PCI code clear up IODA tables */ + pnv_pci_shutdown(); + + /* And unregister all OPAL interrupts so they don't fire + * up while we kexec + */ + opal_shutdown(); +} + #ifdef CONFIG_KEXEC static void pnv_kexec_cpu_down(int crash_shutdown, int secondary) { @@ -187,6 +198,7 @@ define_machine(powernv) { .init_IRQ = pnv_init_IRQ, .show_cpuinfo = pnv_show_cpuinfo, .progress = pnv_progress, + .machine_shutdown = pnv_shutdown, .power_save = power7_idle, .calibrate_decr = generic_calibrate_decr, #ifdef CONFIG_KEXEC -- cgit v0.10.2 From 4a3b8d0b833707811011ad14dd12dabf31fa690a Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Thu, 9 May 2013 22:09:41 -0500 Subject: powerpc: hard_irq_disable(): Call trace_hardirqs_off after disabling lockdep.c has this: /* * So we're supposed to get called after you mask local IRQs, * but for some reason the hardware doesn't quite think you did * a proper job. */ if (DEBUG_LOCKS_WARN_ON(!irqs_disabled())) return; Since irqs_disabled() is based on soft_enabled(), that (not just the hard EE bit) needs to be 0 before we call trace_hardirqs_off. Signed-off-by: Scott Wood diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h index d615b28..ba713f1 100644 --- a/arch/powerpc/include/asm/hw_irq.h +++ b/arch/powerpc/include/asm/hw_irq.h @@ -96,11 +96,12 @@ static inline bool arch_irqs_disabled(void) #endif #define hard_irq_disable() do { \ + u8 _was_enabled = get_paca()->soft_enabled; \ __hard_irq_disable(); \ - if (local_paca->soft_enabled) \ - trace_hardirqs_off(); \ get_paca()->soft_enabled = 0; \ get_paca()->irq_happened |= PACA_IRQ_HARD_DIS; \ + if (_was_enabled) \ + trace_hardirqs_off(); \ } while(0) static inline bool lazy_irq_pending(void) -- cgit v0.10.2 From cf8b166d5c1c89aad6c436a954fa40fd18a75bfb Mon Sep 17 00:00:00 2001 From: Zhang Yanfei Date: Thu, 9 May 2013 23:57:42 +0800 Subject: x86/mm: Add missing comments for initial kernel direct mapping Two sets of comments were lost during patch-series shuffling: - comments for init_range_memory_mapping() - comments in init_mem_mapping that is helpful for reminding people that the pagetable is setup top-down The comments were written by Yinghai in his patch in: https://lkml.org/lkml/2012/11/28/620 This patch reintroduces them. Originally-From: Yinghai Lu Signed-off-by: Zhang Yanfei Cc: Yasuaki Ishimatsu Cc: Konrad Rzeszutek Wilk Cc: Andrew Morton Link: http://lkml.kernel.org/r/518BC776.7010506@gmail.com [ Tidied it all up a bit. ] Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index fdc5dca..eaac174 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -359,7 +359,17 @@ unsigned long __init_refok init_memory_mapping(unsigned long start, } /* - * would have hole in the middle or ends, and only ram parts will be mapped. + * We need to iterate through the E820 memory map and create direct mappings + * for only E820_RAM and E820_KERN_RESERVED regions. We cannot simply + * create direct mappings for all pfns from [0 to max_low_pfn) and + * [4GB to max_pfn) because of possible memory holes in high addresses + * that cannot be marked as UC by fixed/variable range MTRRs. + * Depending on the alignment of E820 ranges, this may possibly result + * in using smaller size (i.e. 4K instead of 2M or 1G) page tables. + * + * init_mem_mapping() calls init_range_memory_mapping() with big range. + * That range would have hole in the middle or ends, and only ram parts + * will be mapped in init_range_memory_mapping(). */ static unsigned long __init init_range_memory_mapping( unsigned long r_start, @@ -419,6 +429,13 @@ void __init init_mem_mapping(void) max_pfn_mapped = 0; /* will get exact value next */ min_pfn_mapped = real_end >> PAGE_SHIFT; last_start = start = real_end; + + /* + * We start from the top (end of memory) and go to the bottom. + * The memblock_find_in_range() gets us a block of RAM from the + * end of RAM in [min_pfn_mapped, max_pfn_mapped) used as new pages + * for page table. + */ while (last_start > ISA_END_ADDRESS) { if (last_start > step_size) { start = round_down(last_start - 1, step_size); -- cgit v0.10.2 From db90f91f6f4a870583d5c11cda187f20e4d835ae Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 3 May 2013 12:52:12 +0100 Subject: ARM: 7714/1: mmc: mmci: Ensure return value of regulator_enable() is checked MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch suppresses the warning below: drivers/mmc/host/mmci.c: In function ‘mmci_set_ios’: drivers/mmc/host/mmci.c:1165:20: warning: ignoring return value of ‘regulator_enable’, declared with attribute warn_unused_result [-Wunused-result] Cc: Chris Ball Acked-by: Srinidhi Kasagar Signed-off-by: Lee Jones Signed-off-by: Russell King diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 375c109..f4f3038 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1130,6 +1130,7 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) struct variant_data *variant = host->variant; u32 pwr = 0; unsigned long flags; + int ret; pm_runtime_get_sync(mmc_dev(mmc)); @@ -1161,8 +1162,12 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) break; case MMC_POWER_ON: if (!IS_ERR(mmc->supply.vqmmc) && - !regulator_is_enabled(mmc->supply.vqmmc)) - regulator_enable(mmc->supply.vqmmc); + !regulator_is_enabled(mmc->supply.vqmmc)) { + ret = regulator_enable(mmc->supply.vqmmc); + if (ret < 0) + dev_err(mmc_dev(mmc), + "failed to enable vqmmc regulator\n"); + } pwr |= MCI_PWR_ON; break; -- cgit v0.10.2 From 9e01573b5cf8b3188c1f33493d2e73a30e8d25fc Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Thu, 9 May 2013 19:19:20 +0100 Subject: ARM: 7715/1: MCPM: adapt to GIC changes after upstream merge Since commit c0114709ed85 ("irqchip: gic: Perform the gic_secondary_init() call via CPU notifier") it is no longer required nor possible to call gic_secondary_init() from platform code. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King diff --git a/arch/arm/common/mcpm_platsmp.c b/arch/arm/common/mcpm_platsmp.c index 52b88d8..3caed0d 100644 --- a/arch/arm/common/mcpm_platsmp.c +++ b/arch/arm/common/mcpm_platsmp.c @@ -15,8 +15,6 @@ #include #include -#include - #include #include #include @@ -49,7 +47,6 @@ static int __cpuinit mcpm_boot_secondary(unsigned int cpu, struct task_struct *i static void __cpuinit mcpm_secondary_init(unsigned int cpu) { mcpm_cpu_powered_up(); - gic_secondary_init(0); } #ifdef CONFIG_HOTPLUG_CPU -- cgit v0.10.2 From a2d0dbb4b55681874c5f288538ae55ae69baeaff Mon Sep 17 00:00:00 2001 From: Xiong Zhou Date: Tue, 7 May 2013 10:15:56 +0800 Subject: bq27x00: Fix I2C dependency in KConfig This patch fixes build failure(randconfig) of next-20130501. When config I2C as m, BATTERY_BQ27x00 as y, here comes the failure. The driver depends on I2C only if I2C is not disabled, as Lars commented. Last version of this patch make the driver depend on I2C unconditionally. Failure message: drivers/built-in.o: In function `bq27x00_read_i2c': bq27x00_battery.c:(.text+0x1082a7): undefined reference to `i2c_transfer' drivers/built-in.o: In function `bq27x00_battery_init': bq27x00_battery.c:(.init.text+0x6085): undefined reference to `i2c_register_driver' bq27x00_battery.c:(.init.text+0x60c7): undefined reference to `i2c_del_driver' drivers/built-in.o: In function `bq27x00_battery_exit': bq27x00_battery.c:(.exit.text+0xbf0): undefined reference to `i2c_del_driver' make: *** [vmlinux] Error 1 Signed-off-by: Xiong Zhou Cc: Lars-Peter Clausen Signed-off-by: Anton Vorontsov diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 814bcb9..674e633 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -152,6 +152,7 @@ config BATTERY_SBS config BATTERY_BQ27x00 tristate "BQ27x00 battery driver" + depends on I2C || I2C=n help Say Y here to enable support for batteries with BQ27x00 (I2C/HDQ) chips. -- cgit v0.10.2 From d3251859168b0b12841e1b90d6d768ab478dc23d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 10 May 2013 11:10:17 -0700 Subject: workqueue: workqueue_congested() shouldn't translate WORK_CPU_UNBOUND into node number df2d5ae499 ("workqueue: map an unbound workqueues to multiple per-node pool_workqueues") made unbound workqueues to map to multiple per-node pool_workqueues and accordingly updated workqueue_contested() so that, for unbound workqueues, it maps the specified @cpu to the NUMA node number to obtain the matching pool_workqueue to query the congested state. Before this change, workqueue_congested() ignored @cpu for unbound workqueues as there was only one pool_workqueue and some users (fscache) called it with WORK_CPU_UNBOUND. After the commit, this causes the following oops as WORK_CPU_UNBOUND gets translated to garbage by cpu_to_node(). BUG: unable to handle kernel paging request at ffff8803598d98b8 IP: [] unbound_pwq_by_node+0xa1/0xfa PGD 2421067 PUD 0 Oops: 0000 [#1] SMP CPU: 1 PID: 2689 Comm: cat Tainted: GF 3.9.0-fsdevel+ #4 task: ffff88003d801040 ti: ffff880025806000 task.ti: ffff880025806000 RIP: 0010:[] [] unbound_pwq_by_node+0xa1/0xfa RSP: 0018:ffff880025807ad8 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff8800388a2400 RCX: 0000000000000003 RDX: ffff880025807fd8 RSI: ffffffff81a31420 RDI: ffff88003d8016e0 RBP: ffff880025807ae8 R08: ffff88003d801730 R09: ffffffffa00b4898 R10: ffffffff81044217 R11: ffff88003d801040 R12: 0000000064206e97 R13: ffff880036059d98 R14: ffff880038cc8080 R15: ffff880038cc82d0 FS: 00007f21afd9c740(0000) GS:ffff88003d100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff8803598d98b8 CR3: 000000003df49000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff8800388a2400 0000000000000002 ffff880025807b18 ffffffff810442ce ffffffff81044217 ffff880000000002 ffff8800371b4080 ffff88003d112ec0 ffff880025807b38 ffffffffa00810b0 ffff880036059d88 ffff880036059be8 Call Trace: [] workqueue_congested+0xb7/0x12c [] fscache_enqueue_object+0xb2/0xe8 [fscache] [] __fscache_acquire_cookie+0x3b9/0x56c [fscache] [] nfs_fscache_set_inode_cookie+0xee/0x132 [nfs] [] do_open+0x9/0xd [nfs] [] do_dentry_open+0x175/0x24b [] finish_open+0x41/0x51 Fix it by using smp_processor_id() if @cpu is WORK_CPU_UNBOUND. Signed-off-by: Tejun Heo Reported-by: David Howells Tested-and-Acked-by: David Howells diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 4aa9f5b..1ae6028 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -4311,6 +4311,12 @@ bool current_is_workqueue_rescuer(void) * no synchronization around this function and the test result is * unreliable and only useful as advisory hints or for debugging. * + * If @cpu is WORK_CPU_UNBOUND, the test is performed on the local CPU. + * Note that both per-cpu and unbound workqueues may be associated with + * multiple pool_workqueues which have separate congested states. A + * workqueue being congested on one CPU doesn't mean the workqueue is also + * contested on other CPUs / NUMA nodes. + * * RETURNS: * %true if congested, %false otherwise. */ @@ -4321,6 +4327,9 @@ bool workqueue_congested(int cpu, struct workqueue_struct *wq) rcu_read_lock_sched(); + if (cpu == WORK_CPU_UNBOUND) + cpu = smp_processor_id(); + if (!(wq->flags & WQ_UNBOUND)) pwq = per_cpu_ptr(wq->cpu_pwqs, cpu); else -- cgit v0.10.2 From c909fc8573af3cff9184551e79cf37784b5ddc24 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sat, 4 May 2013 13:57:55 +0800 Subject: wm831x_backup: Fix wrong kfree call for devdata->backup.name devdata->backup.name points to devdata->name, the memory for devdata->name is part of struct wm831x_backup. Thus remove kfree call for devdata->backup.name. Signed-off-by: Axel Lin Acked-by: Mark Brown Signed-off-by: Anton Vorontsov diff --git a/drivers/power/wm831x_backup.c b/drivers/power/wm831x_backup.c index 58cbb00..56fb509 100644 --- a/drivers/power/wm831x_backup.c +++ b/drivers/power/wm831x_backup.c @@ -207,7 +207,6 @@ static int wm831x_backup_remove(struct platform_device *pdev) struct wm831x_backup *devdata = platform_get_drvdata(pdev); power_supply_unregister(&devdata->backup); - kfree(devdata->backup.name); return 0; } -- cgit v0.10.2 From dccab6092d3c25bf943d12fb658e63fd88bf8b4a Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sat, 4 May 2013 18:51:09 +0800 Subject: pm2301_charger: Fix module alias prefix This driver is a i2c driver, use "i2c" rather than "platform" prefix for module alias. Signed-off-by: Axel Lin Signed-off-by: Anton Vorontsov diff --git a/drivers/power/pm2301_charger.c b/drivers/power/pm2301_charger.c index f123f3c..e9c6ba0 100644 --- a/drivers/power/pm2301_charger.c +++ b/drivers/power/pm2301_charger.c @@ -1269,5 +1269,5 @@ module_exit(pm2xxx_charger_exit); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Rajkumar kasirajan, Olivier Launay"); -MODULE_ALIAS("platform:pm2xxx-charger"); +MODULE_ALIAS("i2c:pm2xxx-charger"); MODULE_DESCRIPTION("PM2xxx charger management driver"); -- cgit v0.10.2 From 416821d3d68164909b2cbcf398e4ba0797f5f8a2 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Fri, 10 May 2013 21:24:01 +0000 Subject: parisc: implement irq stacks - part 2 (v2) This patch fixes few build issues which were introduced with the last irq stack patch, e.g. the combination of stack overflow check and irq stack. Furthermore we now do proper locking and change the irq bh handler to use the irq stack as well. In /proc/interrupts one now can monitor how huge the irq stack has grown and how often it was preferred over the kernel stack. IRQ stacks are now enabled by default just to make sure that we not overflow the kernel stack by accident. Signed-off-by: Helge Deller diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index cad060f..6507dab 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -245,7 +245,7 @@ config SMP config IRQSTACKS bool "Use separate kernel stacks when processing interrupts" - default n + default y help If you say Y here the kernel will use separate kernel stacks for handling hard and soft interrupts. This can help avoid diff --git a/arch/parisc/include/asm/hardirq.h b/arch/parisc/include/asm/hardirq.h index 12373c4..c19f713 100644 --- a/arch/parisc/include/asm/hardirq.h +++ b/arch/parisc/include/asm/hardirq.h @@ -11,10 +11,18 @@ #include #include +#ifdef CONFIG_IRQSTACKS +#define __ARCH_HAS_DO_SOFTIRQ +#endif + typedef struct { unsigned int __softirq_pending; #ifdef CONFIG_DEBUG_STACKOVERFLOW unsigned int kernel_stack_usage; +#ifdef CONFIG_IRQSTACKS + unsigned int irq_stack_usage; + unsigned int irq_stack_counter; +#endif #endif #ifdef CONFIG_SMP unsigned int irq_resched_count; @@ -28,6 +36,7 @@ DECLARE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat); #define __ARCH_IRQ_STAT #define __IRQ_STAT(cpu, member) (irq_stat[cpu].member) #define inc_irq_stat(member) this_cpu_inc(irq_stat.member) +#define __inc_irq_stat(member) __this_cpu_inc(irq_stat.member) #define local_softirq_pending() this_cpu_read(irq_stat.__softirq_pending) #define __ARCH_SET_SOFTIRQ_PENDING diff --git a/arch/parisc/include/asm/processor.h b/arch/parisc/include/asm/processor.h index 0640155..cfbc439 100644 --- a/arch/parisc/include/asm/processor.h +++ b/arch/parisc/include/asm/processor.h @@ -63,10 +63,13 @@ */ #ifdef __KERNEL__ +#include + #define IRQ_STACK_SIZE (4096 << 2) /* 16k irq stack size */ union irq_stack_union { unsigned long stack[IRQ_STACK_SIZE/sizeof(unsigned long)]; + raw_spinlock_t lock; }; DECLARE_PER_CPU(union irq_stack_union, irq_stack_union); diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index e255db0..55237a7 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -166,22 +166,32 @@ int arch_show_interrupts(struct seq_file *p, int prec) seq_printf(p, "%*s: ", prec, "STK"); for_each_online_cpu(j) seq_printf(p, "%10u ", irq_stats(j)->kernel_stack_usage); - seq_printf(p, " Kernel stack usage\n"); + seq_puts(p, " Kernel stack usage\n"); +# ifdef CONFIG_IRQSTACKS + seq_printf(p, "%*s: ", prec, "IST"); + for_each_online_cpu(j) + seq_printf(p, "%10u ", irq_stats(j)->irq_stack_usage); + seq_puts(p, " Interrupt stack usage\n"); + seq_printf(p, "%*s: ", prec, "ISC"); + for_each_online_cpu(j) + seq_printf(p, "%10u ", irq_stats(j)->irq_stack_counter); + seq_puts(p, " Interrupt stack usage counter\n"); +# endif #endif #ifdef CONFIG_SMP seq_printf(p, "%*s: ", prec, "RES"); for_each_online_cpu(j) seq_printf(p, "%10u ", irq_stats(j)->irq_resched_count); - seq_printf(p, " Rescheduling interrupts\n"); + seq_puts(p, " Rescheduling interrupts\n"); seq_printf(p, "%*s: ", prec, "CAL"); for_each_online_cpu(j) seq_printf(p, "%10u ", irq_stats(j)->irq_call_count); - seq_printf(p, " Function call interrupts\n"); + seq_puts(p, " Function call interrupts\n"); #endif seq_printf(p, "%*s: ", prec, "TLB"); for_each_online_cpu(j) seq_printf(p, "%10u ", irq_stats(j)->irq_tlb_count); - seq_printf(p, " TLB shootdowns\n"); + seq_puts(p, " TLB shootdowns\n"); return 0; } @@ -378,6 +388,7 @@ static inline void stack_overflow_check(struct pt_regs *regs) unsigned long sp = regs->gr[30]; unsigned long stack_usage; unsigned int *last_usage; + int cpu = smp_processor_id(); /* if sr7 != 0, we interrupted a userspace process which we do not want * to check for stack overflow. We will only check the kernel stack. */ @@ -386,7 +397,31 @@ static inline void stack_overflow_check(struct pt_regs *regs) /* calculate kernel stack usage */ stack_usage = sp - stack_start; - last_usage = &per_cpu(irq_stat.kernel_stack_usage, smp_processor_id()); +#ifdef CONFIG_IRQSTACKS + if (likely(stack_usage <= THREAD_SIZE)) + goto check_kernel_stack; /* found kernel stack */ + + /* check irq stack usage */ + stack_start = (unsigned long) &per_cpu(irq_stack_union, cpu).stack; + stack_usage = sp - stack_start; + + last_usage = &per_cpu(irq_stat.irq_stack_usage, cpu); + if (unlikely(stack_usage > *last_usage)) + *last_usage = stack_usage; + + if (likely(stack_usage < (IRQ_STACK_SIZE - STACK_MARGIN))) + return; + + pr_emerg("stackcheck: %s will most likely overflow irq stack " + "(sp:%lx, stk bottom-top:%lx-%lx)\n", + current->comm, sp, stack_start, stack_start + IRQ_STACK_SIZE); + goto panic_check; + +check_kernel_stack: +#endif + + /* check kernel stack usage */ + last_usage = &per_cpu(irq_stat.kernel_stack_usage, cpu); if (unlikely(stack_usage > *last_usage)) *last_usage = stack_usage; @@ -398,31 +433,69 @@ static inline void stack_overflow_check(struct pt_regs *regs) "(sp:%lx, stk bottom-top:%lx-%lx)\n", current->comm, sp, stack_start, stack_start + THREAD_SIZE); +#ifdef CONFIG_IRQSTACKS +panic_check: +#endif if (sysctl_panic_on_stackoverflow) panic("low stack detected by irq handler - check messages\n"); #endif } #ifdef CONFIG_IRQSTACKS -DEFINE_PER_CPU(union irq_stack_union, irq_stack_union); +DEFINE_PER_CPU(union irq_stack_union, irq_stack_union) = { + .lock = __RAW_SPIN_LOCK_UNLOCKED((irq_stack_union).lock) + }; static void execute_on_irq_stack(void *func, unsigned long param1) { - unsigned long *irq_stack_start; + union irq_stack_union *union_ptr; unsigned long irq_stack; - int cpu = smp_processor_id(); + raw_spinlock_t *irq_stack_in_use; - irq_stack_start = &per_cpu(irq_stack_union, cpu).stack[0]; - irq_stack = (unsigned long) irq_stack_start; - irq_stack = ALIGN(irq_stack, 16); /* align for stack frame usage */ + union_ptr = &per_cpu(irq_stack_union, smp_processor_id()); + irq_stack = (unsigned long) &union_ptr->stack; + irq_stack = ALIGN(irq_stack + sizeof(irq_stack_union.lock), + 64); /* align for stack frame usage */ - BUG_ON(*irq_stack_start); /* report bug if we were called recursive. */ - *irq_stack_start = 1; + /* We may be called recursive. If we are already using the irq stack, + * just continue to use it. Use spinlocks to serialize + * the irq stack usage. + */ + irq_stack_in_use = &union_ptr->lock; + if (!raw_spin_trylock(irq_stack_in_use)) { + void (*direct_call)(unsigned long p1) = func; + + /* We are using the IRQ stack already. + * Do direct call on current stack. */ + direct_call(param1); + return; + } /* This is where we switch to the IRQ stack. */ call_on_stack(param1, func, irq_stack); - *irq_stack_start = 0; + __inc_irq_stat(irq_stack_counter); + + /* free up irq stack usage. */ + do_raw_spin_unlock(irq_stack_in_use); +} + +asmlinkage void do_softirq(void) +{ + __u32 pending; + unsigned long flags; + + if (in_interrupt()) + return; + + local_irq_save(flags); + + pending = local_softirq_pending(); + + if (pending) + execute_on_irq_stack(__do_softirq, 0); + + local_irq_restore(flags); } #endif /* CONFIG_IRQSTACKS */ diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index ce939ac..1c96564 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -1069,7 +1069,7 @@ void flush_tlb_all(void) { int do_recycle; - inc_irq_stat(irq_tlb_count); + __inc_irq_stat(irq_tlb_count); do_recycle = 0; spin_lock(&sid_lock); if (dirty_space_ids > RECYCLE_THRESHOLD) { @@ -1090,7 +1090,7 @@ void flush_tlb_all(void) #else void flush_tlb_all(void) { - inc_irq_stat(irq_tlb_count); + __inc_irq_stat(irq_tlb_count); spin_lock(&sid_lock); flush_tlb_all_local(NULL); recycle_sids(); -- cgit v0.10.2 From f0a18819e261afc5fdbd8c5c6f9943123c5461ba Mon Sep 17 00:00:00 2001 From: John David Anglin Date: Fri, 10 May 2013 23:21:38 +0000 Subject: parisc: fix SMP races when updating PTE and TLB entries in entry.S Currently, race conditions exist in the handling of TLB interruptions in entry.S. In particular, dirty bit updates can be lost if an accessed interruption occurs just after the dirty bit interruption on a different cpu. Lost dirty bit updates result in user pages not being flushed and general system instability. This change adds lock and unlock macros to synchronize all PTE and TLB updates done in entry.S. As a result, userspace stability is significantly improved. Signed-off-by: John David Anglin Signed-off-by: Helge Deller diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index 4bb96ad..ae27cb6 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -452,9 +452,41 @@ L2_ptep \pgd,\pte,\index,\va,\fault .endm + /* Acquire pa_dbit_lock lock. */ + .macro dbit_lock spc,tmp,tmp1 +#ifdef CONFIG_SMP + cmpib,COND(=),n 0,\spc,2f + load32 PA(pa_dbit_lock),\tmp +1: LDCW 0(\tmp),\tmp1 + cmpib,COND(=) 0,\tmp1,1b + nop +2: +#endif + .endm + + /* Release pa_dbit_lock lock without reloading lock address. */ + .macro dbit_unlock0 spc,tmp +#ifdef CONFIG_SMP + or,COND(=) %r0,\spc,%r0 + stw \spc,0(\tmp) +#endif + .endm + + /* Release pa_dbit_lock lock. */ + .macro dbit_unlock1 spc,tmp +#ifdef CONFIG_SMP + load32 PA(pa_dbit_lock),\tmp + dbit_unlock0 \spc,\tmp +#endif + .endm + /* Set the _PAGE_ACCESSED bit of the PTE. Be clever and * don't needlessly dirty the cache line if it was already set */ - .macro update_ptep ptep,pte,tmp,tmp1 + .macro update_ptep spc,ptep,pte,tmp,tmp1 +#ifdef CONFIG_SMP + or,COND(=) %r0,\spc,%r0 + LDREG 0(\ptep),\pte +#endif ldi _PAGE_ACCESSED,\tmp1 or \tmp1,\pte,\tmp and,COND(<>) \tmp1,\pte,%r0 @@ -463,7 +495,11 @@ /* Set the dirty bit (and accessed bit). No need to be * clever, this is only used from the dirty fault */ - .macro update_dirty ptep,pte,tmp + .macro update_dirty spc,ptep,pte,tmp +#ifdef CONFIG_SMP + or,COND(=) %r0,\spc,%r0 + LDREG 0(\ptep),\pte +#endif ldi _PAGE_ACCESSED|_PAGE_DIRTY,\tmp or \tmp,\pte,\pte STREG \pte,0(\ptep) @@ -1111,11 +1147,13 @@ dtlb_miss_20w: L3_ptep ptp,pte,t0,va,dtlb_check_alias_20w - update_ptep ptp,pte,t0,t1 + dbit_lock spc,t0,t1 + update_ptep spc,ptp,pte,t0,t1 make_insert_tlb spc,pte,prot idtlbt pte,prot + dbit_unlock1 spc,t0 rfir nop @@ -1135,11 +1173,13 @@ nadtlb_miss_20w: L3_ptep ptp,pte,t0,va,nadtlb_check_alias_20w - update_ptep ptp,pte,t0,t1 + dbit_lock spc,t0,t1 + update_ptep spc,ptp,pte,t0,t1 make_insert_tlb spc,pte,prot idtlbt pte,prot + dbit_unlock1 spc,t0 rfir nop @@ -1161,7 +1201,8 @@ dtlb_miss_11: L2_ptep ptp,pte,t0,va,dtlb_check_alias_11 - update_ptep ptp,pte,t0,t1 + dbit_lock spc,t0,t1 + update_ptep spc,ptp,pte,t0,t1 make_insert_tlb_11 spc,pte,prot @@ -1172,6 +1213,7 @@ dtlb_miss_11: idtlbp prot,(%sr1,va) mtsp t0, %sr1 /* Restore sr1 */ + dbit_unlock1 spc,t0 rfir nop @@ -1192,7 +1234,8 @@ nadtlb_miss_11: L2_ptep ptp,pte,t0,va,nadtlb_check_alias_11 - update_ptep ptp,pte,t0,t1 + dbit_lock spc,t0,t1 + update_ptep spc,ptp,pte,t0,t1 make_insert_tlb_11 spc,pte,prot @@ -1204,6 +1247,7 @@ nadtlb_miss_11: idtlbp prot,(%sr1,va) mtsp t0, %sr1 /* Restore sr1 */ + dbit_unlock1 spc,t0 rfir nop @@ -1224,13 +1268,15 @@ dtlb_miss_20: L2_ptep ptp,pte,t0,va,dtlb_check_alias_20 - update_ptep ptp,pte,t0,t1 + dbit_lock spc,t0,t1 + update_ptep spc,ptp,pte,t0,t1 make_insert_tlb spc,pte,prot f_extend pte,t0 idtlbt pte,prot + dbit_unlock1 spc,t0 rfir nop @@ -1250,13 +1296,15 @@ nadtlb_miss_20: L2_ptep ptp,pte,t0,va,nadtlb_check_alias_20 - update_ptep ptp,pte,t0,t1 + dbit_lock spc,t0,t1 + update_ptep spc,ptp,pte,t0,t1 make_insert_tlb spc,pte,prot f_extend pte,t0 idtlbt pte,prot + dbit_unlock1 spc,t0 rfir nop @@ -1357,11 +1405,13 @@ itlb_miss_20w: L3_ptep ptp,pte,t0,va,itlb_fault - update_ptep ptp,pte,t0,t1 + dbit_lock spc,t0,t1 + update_ptep spc,ptp,pte,t0,t1 make_insert_tlb spc,pte,prot iitlbt pte,prot + dbit_unlock1 spc,t0 rfir nop @@ -1379,11 +1429,13 @@ naitlb_miss_20w: L3_ptep ptp,pte,t0,va,naitlb_check_alias_20w - update_ptep ptp,pte,t0,t1 + dbit_lock spc,t0,t1 + update_ptep spc,ptp,pte,t0,t1 make_insert_tlb spc,pte,prot iitlbt pte,prot + dbit_unlock1 spc,t0 rfir nop @@ -1405,7 +1457,8 @@ itlb_miss_11: L2_ptep ptp,pte,t0,va,itlb_fault - update_ptep ptp,pte,t0,t1 + dbit_lock spc,t0,t1 + update_ptep spc,ptp,pte,t0,t1 make_insert_tlb_11 spc,pte,prot @@ -1416,6 +1469,7 @@ itlb_miss_11: iitlbp prot,(%sr1,va) mtsp t0, %sr1 /* Restore sr1 */ + dbit_unlock1 spc,t0 rfir nop @@ -1427,7 +1481,8 @@ naitlb_miss_11: L2_ptep ptp,pte,t0,va,naitlb_check_alias_11 - update_ptep ptp,pte,t0,t1 + dbit_lock spc,t0,t1 + update_ptep spc,ptp,pte,t0,t1 make_insert_tlb_11 spc,pte,prot @@ -1438,6 +1493,7 @@ naitlb_miss_11: iitlbp prot,(%sr1,va) mtsp t0, %sr1 /* Restore sr1 */ + dbit_unlock1 spc,t0 rfir nop @@ -1459,13 +1515,15 @@ itlb_miss_20: L2_ptep ptp,pte,t0,va,itlb_fault - update_ptep ptp,pte,t0,t1 + dbit_lock spc,t0,t1 + update_ptep spc,ptp,pte,t0,t1 make_insert_tlb spc,pte,prot f_extend pte,t0 iitlbt pte,prot + dbit_unlock1 spc,t0 rfir nop @@ -1477,13 +1535,15 @@ naitlb_miss_20: L2_ptep ptp,pte,t0,va,naitlb_check_alias_20 - update_ptep ptp,pte,t0,t1 + dbit_lock spc,t0,t1 + update_ptep spc,ptp,pte,t0,t1 make_insert_tlb spc,pte,prot f_extend pte,t0 iitlbt pte,prot + dbit_unlock1 spc,t0 rfir nop @@ -1507,29 +1567,13 @@ dbit_trap_20w: L3_ptep ptp,pte,t0,va,dbit_fault -#ifdef CONFIG_SMP - cmpib,COND(=),n 0,spc,dbit_nolock_20w - load32 PA(pa_dbit_lock),t0 - -dbit_spin_20w: - LDCW 0(t0),t1 - cmpib,COND(=) 0,t1,dbit_spin_20w - nop - -dbit_nolock_20w: -#endif - update_dirty ptp,pte,t1 + dbit_lock spc,t0,t1 + update_dirty spc,ptp,pte,t1 make_insert_tlb spc,pte,prot idtlbt pte,prot -#ifdef CONFIG_SMP - cmpib,COND(=),n 0,spc,dbit_nounlock_20w - ldi 1,t1 - stw t1,0(t0) - -dbit_nounlock_20w: -#endif + dbit_unlock0 spc,t0 rfir nop @@ -1543,18 +1587,8 @@ dbit_trap_11: L2_ptep ptp,pte,t0,va,dbit_fault -#ifdef CONFIG_SMP - cmpib,COND(=),n 0,spc,dbit_nolock_11 - load32 PA(pa_dbit_lock),t0 - -dbit_spin_11: - LDCW 0(t0),t1 - cmpib,= 0,t1,dbit_spin_11 - nop - -dbit_nolock_11: -#endif - update_dirty ptp,pte,t1 + dbit_lock spc,t0,t1 + update_dirty spc,ptp,pte,t1 make_insert_tlb_11 spc,pte,prot @@ -1565,13 +1599,7 @@ dbit_nolock_11: idtlbp prot,(%sr1,va) mtsp t1, %sr1 /* Restore sr1 */ -#ifdef CONFIG_SMP - cmpib,COND(=),n 0,spc,dbit_nounlock_11 - ldi 1,t1 - stw t1,0(t0) - -dbit_nounlock_11: -#endif + dbit_unlock0 spc,t0 rfir nop @@ -1583,32 +1611,15 @@ dbit_trap_20: L2_ptep ptp,pte,t0,va,dbit_fault -#ifdef CONFIG_SMP - cmpib,COND(=),n 0,spc,dbit_nolock_20 - load32 PA(pa_dbit_lock),t0 - -dbit_spin_20: - LDCW 0(t0),t1 - cmpib,= 0,t1,dbit_spin_20 - nop - -dbit_nolock_20: -#endif - update_dirty ptp,pte,t1 + dbit_lock spc,t0,t1 + update_dirty spc,ptp,pte,t1 make_insert_tlb spc,pte,prot f_extend pte,t1 idtlbt pte,prot - -#ifdef CONFIG_SMP - cmpib,COND(=),n 0,spc,dbit_nounlock_20 - ldi 1,t1 - stw t1,0(t0) - -dbit_nounlock_20: -#endif + dbit_unlock0 spc,t0 rfir nop -- cgit v0.10.2 From cffe52f38eb6f633d63a3313661d9ce8daaae9dd Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Thu, 9 May 2013 09:25:09 +0000 Subject: qlcnic: Fix setting MAC address o Delete previous unicast MAC which is already programmed in adapter before setting new unicast MAC Signed-off-by: Manish Chopra Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 264d5a4..04037b5 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -308,6 +308,23 @@ int qlcnic_read_mac_addr(struct qlcnic_adapter *adapter) return 0; } +static void qlcnic_delete_adapter_mac(struct qlcnic_adapter *adapter) +{ + struct qlcnic_mac_list_s *cur; + struct list_head *head; + + list_for_each(head, &adapter->mac_list) { + cur = list_entry(head, struct qlcnic_mac_list_s, list); + if (!memcmp(adapter->mac_addr, cur->mac_addr, ETH_ALEN)) { + qlcnic_sre_macaddr_change(adapter, cur->mac_addr, + 0, QLCNIC_MAC_DEL); + list_del(&cur->list); + kfree(cur); + return; + } + } +} + static int qlcnic_set_mac(struct net_device *netdev, void *p) { struct qlcnic_adapter *adapter = netdev_priv(netdev); @@ -322,11 +339,15 @@ static int qlcnic_set_mac(struct net_device *netdev, void *p) if (!is_valid_ether_addr(addr->sa_data)) return -EINVAL; + if (!memcmp(adapter->mac_addr, addr->sa_data, ETH_ALEN)) + return 0; + if (test_bit(__QLCNIC_DEV_UP, &adapter->state)) { netif_device_detach(netdev); qlcnic_napi_disable(adapter); } + qlcnic_delete_adapter_mac(adapter); memcpy(adapter->mac_addr, addr->sa_data, netdev->addr_len); memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); qlcnic_set_multi(adapter->netdev); -- cgit v0.10.2 From 8c0464108a79c7698d8af26a7b299c7f6651e02e Mon Sep 17 00:00:00 2001 From: Shahed Shaikh Date: Thu, 9 May 2013 09:25:10 +0000 Subject: qlcnic: Fix ethtool strings o Add missing information in ethtool statistics information array. o Fix the typo in the statistics information string. Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c index 08efb46..6005b06 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c @@ -131,12 +131,13 @@ static const char qlcnic_83xx_rx_stats_strings[][ETH_GSTRING_LEN] = { "ctx_lro_pkt_cnt", "ctx_ip_csum_error", "ctx_rx_pkts_wo_ctx", - "ctx_rx_pkts_dropped_wo_sts", + "ctx_rx_pkts_drop_wo_sds_on_card", + "ctx_rx_pkts_drop_wo_sds_on_host", "ctx_rx_osized_pkts", "ctx_rx_pkts_dropped_wo_rds", "ctx_rx_unexpected_mcast_pkts", "ctx_invalid_mac_address", - "ctx_rx_rds_ring_prim_attemoted", + "ctx_rx_rds_ring_prim_attempted", "ctx_rx_rds_ring_prim_success", "ctx_num_lro_flows_added", "ctx_num_lro_flows_removed", -- cgit v0.10.2 From 9fd13331ab8f108ade0e8077b69ff4663b63d43f Mon Sep 17 00:00:00 2001 From: Himanshu Madhani Date: Thu, 9 May 2013 09:25:11 +0000 Subject: qlcnic: Fix missing bracket in module parameter. Signed-off-by: Himanshu Madhani Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 04037b5..d97446a 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -37,24 +37,24 @@ MODULE_PARM_DESC(qlcnic_mac_learn, "Mac Filter (0=learning is disabled, 1=Driver learning is enabled, 2=FDB learning is enabled)"); int qlcnic_use_msi = 1; -MODULE_PARM_DESC(use_msi, "MSI interrupt (0=disabled, 1=enabled"); +MODULE_PARM_DESC(use_msi, "MSI interrupt (0=disabled, 1=enabled)"); module_param_named(use_msi, qlcnic_use_msi, int, 0444); int qlcnic_use_msi_x = 1; -MODULE_PARM_DESC(use_msi_x, "MSI-X interrupt (0=disabled, 1=enabled"); +MODULE_PARM_DESC(use_msi_x, "MSI-X interrupt (0=disabled, 1=enabled)"); module_param_named(use_msi_x, qlcnic_use_msi_x, int, 0444); int qlcnic_auto_fw_reset = 1; -MODULE_PARM_DESC(auto_fw_reset, "Auto firmware reset (0=disabled, 1=enabled"); +MODULE_PARM_DESC(auto_fw_reset, "Auto firmware reset (0=disabled, 1=enabled)"); module_param_named(auto_fw_reset, qlcnic_auto_fw_reset, int, 0644); int qlcnic_load_fw_file; -MODULE_PARM_DESC(load_fw_file, "Load firmware from (0=flash, 1=file"); +MODULE_PARM_DESC(load_fw_file, "Load firmware from (0=flash, 1=file)"); module_param_named(load_fw_file, qlcnic_load_fw_file, int, 0444); int qlcnic_config_npars; module_param(qlcnic_config_npars, int, 0444); -MODULE_PARM_DESC(qlcnic_config_npars, "Configure NPARs (0=disabled, 1=enabled"); +MODULE_PARM_DESC(qlcnic_config_npars, "Configure NPARs (0=disabled, 1=enabled)"); static int qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent); static void qlcnic_remove(struct pci_dev *pdev); -- cgit v0.10.2 From b938662d88264c1a92611ca1b82fdff5a4e87121 Mon Sep 17 00:00:00 2001 From: Himanshu Madhani Date: Thu, 9 May 2013 09:25:12 +0000 Subject: qlcnic: Fix ethtool supported port status for 83xx o Fix display for interface while using 'ethtool ' for 83xx adapter Signed-off-by: Himanshu Madhani Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 90c253b..019c5f7 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -429,6 +429,7 @@ struct qlcnic_hardware_context { u16 port_type; u16 board_type; + u16 supported_type; u16 link_speed; u16 link_duplex; @@ -1514,6 +1515,7 @@ void qlcnic_create_diag_entries(struct qlcnic_adapter *adapter); void qlcnic_remove_diag_entries(struct qlcnic_adapter *adapter); void qlcnic_82xx_add_sysfs(struct qlcnic_adapter *adapter); void qlcnic_82xx_remove_sysfs(struct qlcnic_adapter *adapter); +int qlcnic_82xx_get_settings(struct qlcnic_adapter *, struct ethtool_cmd *); int qlcnicvf_config_bridged_mode(struct qlcnic_adapter *, u32); int qlcnicvf_config_led(struct qlcnic_adapter *, u32, u32); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index ea790a9..642fca0 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -2830,6 +2830,23 @@ int qlcnic_83xx_test_link(struct qlcnic_adapter *adapter) break; } config = cmd.rsp.arg[3]; + if (QLC_83XX_SFP_PRESENT(config)) { + switch (ahw->module_type) { + case LINKEVENT_MODULE_OPTICAL_UNKNOWN: + case LINKEVENT_MODULE_OPTICAL_SRLR: + case LINKEVENT_MODULE_OPTICAL_LRM: + case LINKEVENT_MODULE_OPTICAL_SFP_1G: + ahw->supported_type = PORT_FIBRE; + break; + case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLE: + case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLELEN: + case LINKEVENT_MODULE_TWINAX: + ahw->supported_type = PORT_TP; + break; + default: + ahw->supported_type = PORT_OTHER; + } + } if (config & 1) err = 1; } @@ -2838,7 +2855,8 @@ out: return config; } -int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter) +int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter, + struct ethtool_cmd *ecmd) { u32 config = 0; int status = 0; @@ -2851,6 +2869,54 @@ int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter) ahw->module_type = QLC_83XX_SFP_MODULE_TYPE(config); /* hard code until there is a way to get it from flash */ ahw->board_type = QLCNIC_BRDTYPE_83XX_10G; + + if (netif_running(adapter->netdev) && ahw->has_link_events) { + ethtool_cmd_speed_set(ecmd, ahw->link_speed); + ecmd->duplex = ahw->link_duplex; + ecmd->autoneg = ahw->link_autoneg; + } else { + ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN); + ecmd->duplex = DUPLEX_UNKNOWN; + ecmd->autoneg = AUTONEG_DISABLE; + } + + if (ahw->port_type == QLCNIC_XGBE) { + ecmd->supported = SUPPORTED_1000baseT_Full; + ecmd->advertising = ADVERTISED_1000baseT_Full; + } else { + ecmd->supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full); + ecmd->advertising = (ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_1000baseT_Half | + ADVERTISED_1000baseT_Full); + } + + switch (ahw->supported_type) { + case PORT_FIBRE: + ecmd->supported |= SUPPORTED_FIBRE; + ecmd->advertising |= ADVERTISED_FIBRE; + ecmd->port = PORT_FIBRE; + ecmd->transceiver = XCVR_EXTERNAL; + break; + case PORT_TP: + ecmd->supported |= SUPPORTED_TP; + ecmd->advertising |= ADVERTISED_TP; + ecmd->port = PORT_TP; + ecmd->transceiver = XCVR_INTERNAL; + break; + default: + ecmd->supported |= SUPPORTED_FIBRE; + ecmd->advertising |= ADVERTISED_FIBRE; + ecmd->port = PORT_OTHER; + ecmd->transceiver = XCVR_EXTERNAL; + break; + } + ecmd->phy_address = ahw->physical_port; return status; } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h index 1f1d85e..faf5553 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h @@ -603,7 +603,7 @@ int qlcnic_83xx_get_vnic_pf_info(struct qlcnic_adapter *, struct qlcnic_info *); void qlcnic_83xx_get_minidump_template(struct qlcnic_adapter *); void qlcnic_83xx_get_stats(struct qlcnic_adapter *adapter, u64 *data); -int qlcnic_83xx_get_settings(struct qlcnic_adapter *); +int qlcnic_83xx_get_settings(struct qlcnic_adapter *, struct ethtool_cmd *); int qlcnic_83xx_set_settings(struct qlcnic_adapter *, struct ethtool_cmd *); void qlcnic_83xx_get_pauseparam(struct qlcnic_adapter *, struct ethtool_pauseparam *); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c index 6005b06..f67652d 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c @@ -252,6 +252,18 @@ static int qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) { struct qlcnic_adapter *adapter = netdev_priv(dev); + + if (qlcnic_82xx_check(adapter)) + return qlcnic_82xx_get_settings(adapter, ecmd); + else if (qlcnic_83xx_check(adapter)) + return qlcnic_83xx_get_settings(adapter, ecmd); + + return -EIO; +} + +int qlcnic_82xx_get_settings(struct qlcnic_adapter *adapter, + struct ethtool_cmd *ecmd) +{ struct qlcnic_hardware_context *ahw = adapter->ahw; u32 speed, reg; int check_sfp_module = 0; @@ -277,10 +289,7 @@ qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) } else if (adapter->ahw->port_type == QLCNIC_XGBE) { u32 val = 0; - if (qlcnic_83xx_check(adapter)) - qlcnic_83xx_get_settings(adapter); - else - val = QLCRD32(adapter, QLCNIC_PORT_MODE_ADDR); + val = QLCRD32(adapter, QLCNIC_PORT_MODE_ADDR); if (val == QLCNIC_PORT_MODE_802_3_AP) { ecmd->supported = SUPPORTED_1000baseT_Full; @@ -290,16 +299,13 @@ qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) ecmd->advertising = ADVERTISED_10000baseT_Full; } - if (netif_running(dev) && adapter->ahw->has_link_events) { - if (qlcnic_82xx_check(adapter)) { - reg = QLCRD32(adapter, - P3P_LINK_SPEED_REG(pcifn)); - speed = P3P_LINK_SPEED_VAL(pcifn, reg); - ahw->link_speed = speed * P3P_LINK_SPEED_MHZ; - } - ethtool_cmd_speed_set(ecmd, adapter->ahw->link_speed); - ecmd->autoneg = adapter->ahw->link_autoneg; - ecmd->duplex = adapter->ahw->link_duplex; + if (netif_running(adapter->netdev) && ahw->has_link_events) { + reg = QLCRD32(adapter, P3P_LINK_SPEED_REG(pcifn)); + speed = P3P_LINK_SPEED_VAL(pcifn, reg); + ahw->link_speed = speed * P3P_LINK_SPEED_MHZ; + ethtool_cmd_speed_set(ecmd, ahw->link_speed); + ecmd->autoneg = ahw->link_autoneg; + ecmd->duplex = ahw->link_duplex; goto skip; } @@ -341,8 +347,8 @@ skip: case QLCNIC_BRDTYPE_P3P_10G_SFP_QT: ecmd->advertising |= ADVERTISED_TP; ecmd->supported |= SUPPORTED_TP; - check_sfp_module = netif_running(dev) && - adapter->ahw->has_link_events; + check_sfp_module = netif_running(adapter->netdev) && + ahw->has_link_events; case QLCNIC_BRDTYPE_P3P_10G_XFP: ecmd->supported |= SUPPORTED_FIBRE; ecmd->advertising |= ADVERTISED_FIBRE; @@ -356,8 +362,8 @@ skip: ecmd->advertising |= (ADVERTISED_FIBRE | ADVERTISED_TP); ecmd->port = PORT_FIBRE; - check_sfp_module = netif_running(dev) && - adapter->ahw->has_link_events; + check_sfp_module = netif_running(adapter->netdev) && + ahw->has_link_events; } else { ecmd->autoneg = AUTONEG_ENABLE; ecmd->supported |= (SUPPORTED_TP | SUPPORTED_Autoneg); @@ -366,13 +372,6 @@ skip: ecmd->port = PORT_TP; } break; - case QLCNIC_BRDTYPE_83XX_10G: - ecmd->autoneg = AUTONEG_DISABLE; - ecmd->supported |= (SUPPORTED_FIBRE | SUPPORTED_TP); - ecmd->advertising |= (ADVERTISED_FIBRE | ADVERTISED_TP); - ecmd->port = PORT_FIBRE; - check_sfp_module = netif_running(dev) && ahw->has_link_events; - break; default: dev_err(&adapter->pdev->dev, "Unsupported board model %d\n", adapter->ahw->board_type); -- cgit v0.10.2 From 536faa61825c8e92f520264228388d69783370d3 Mon Sep 17 00:00:00 2001 From: Sony Chacko Date: Thu, 9 May 2013 09:25:13 +0000 Subject: qlcnic: Fix reset recovery after transmit timeout o When transmit timeout happens, recovery attempt should start with adapter soft reset. If soft reset fails to resume traffic, firmware dump will be collected and driver will perform a hard reset of the adapter. Reset recovery on 83xx was failing after a hard reset. This patch fixes that issue. Signed-off-by: Sony Chacko Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c index ab1d8d9..c67d1eb 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c @@ -435,10 +435,6 @@ static void qlcnic_83xx_idc_attach_driver(struct qlcnic_adapter *adapter) } done: netif_device_attach(netdev); - if (netif_running(netdev)) { - netif_carrier_on(netdev); - netif_wake_queue(netdev); - } } static int qlcnic_83xx_idc_enter_failed_state(struct qlcnic_adapter *adapter, @@ -642,15 +638,21 @@ static int qlcnic_83xx_idc_reattach_driver(struct qlcnic_adapter *adapter) static void qlcnic_83xx_idc_update_idc_params(struct qlcnic_adapter *adapter) { + struct qlcnic_hardware_context *ahw = adapter->ahw; + qlcnic_83xx_idc_update_drv_presence_reg(adapter, 1, 1); - clear_bit(__QLCNIC_RESETTING, &adapter->state); set_bit(QLC_83XX_MBX_READY, &adapter->ahw->idc.status); qlcnic_83xx_idc_update_audit_reg(adapter, 0, 1); set_bit(QLC_83XX_MODULE_LOADED, &adapter->ahw->idc.status); - adapter->ahw->idc.quiesce_req = 0; - adapter->ahw->idc.delay = QLC_83XX_IDC_FW_POLL_DELAY; - adapter->ahw->idc.err_code = 0; - adapter->ahw->idc.collect_dump = 0; + + ahw->idc.quiesce_req = 0; + ahw->idc.delay = QLC_83XX_IDC_FW_POLL_DELAY; + ahw->idc.err_code = 0; + ahw->idc.collect_dump = 0; + ahw->reset_context = 0; + adapter->tx_timeo_cnt = 0; + + clear_bit(__QLCNIC_RESETTING, &adapter->state); } /** @@ -851,6 +853,7 @@ static int qlcnic_83xx_idc_ready_state(struct qlcnic_adapter *adapter) /* Check for soft reset request */ if (ahw->reset_context && !(val & QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY)) { + adapter->ahw->reset_context = 0; qlcnic_83xx_idc_tx_soft_reset(adapter); return ret; } @@ -914,6 +917,7 @@ static int qlcnic_83xx_idc_need_quiesce_state(struct qlcnic_adapter *adapter) static int qlcnic_83xx_idc_failed_state(struct qlcnic_adapter *adapter) { dev_err(&adapter->pdev->dev, "%s: please restart!!\n", __func__); + clear_bit(__QLCNIC_RESETTING, &adapter->state); adapter->ahw->idc.err_code = -EIO; return 0; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index d97446a..8fb836d 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -2502,12 +2502,17 @@ static void qlcnic_tx_timeout(struct net_device *netdev) if (test_bit(__QLCNIC_RESETTING, &adapter->state)) return; - dev_err(&netdev->dev, "transmit timeout, resetting.\n"); - - if (++adapter->tx_timeo_cnt >= QLCNIC_MAX_TX_TIMEOUTS) - adapter->need_fw_reset = 1; - else + if (++adapter->tx_timeo_cnt >= QLCNIC_MAX_TX_TIMEOUTS) { + netdev_info(netdev, "Tx timeout, reset the adapter.\n"); + if (qlcnic_82xx_check(adapter)) + adapter->need_fw_reset = 1; + else if (qlcnic_83xx_check(adapter)) + qlcnic_83xx_idc_request_reset(adapter, + QLCNIC_FORCE_FW_DUMP_KEY); + } else { + netdev_info(netdev, "Tx timeout, reset adapter context.\n"); adapter->ahw->reset_context = 1; + } } static struct net_device_stats *qlcnic_get_stats(struct net_device *netdev) -- cgit v0.10.2 From 13a82b44fd761fdb6aeceb2ce9930310569efa3b Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Thu, 9 May 2013 09:25:14 +0000 Subject: qlcnic: Fix bug in diagnostics test reset recovery path o In order to perform reset recovery during diagnostics tests, current device status information need to be preserved. This patch makes the required changes in diagnostics routines Signed-off-by: Manish Chopra Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index 642fca0..7b5cb61 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -1276,11 +1276,13 @@ out: return err; } -static int qlcnic_83xx_diag_alloc_res(struct net_device *netdev, int test) +static int qlcnic_83xx_diag_alloc_res(struct net_device *netdev, int test, + int num_sds_ring) { struct qlcnic_adapter *adapter = netdev_priv(netdev); struct qlcnic_host_sds_ring *sds_ring; struct qlcnic_host_rds_ring *rds_ring; + u16 adapter_state = adapter->is_up; u8 ring; int ret; @@ -1304,6 +1306,10 @@ static int qlcnic_83xx_diag_alloc_res(struct net_device *netdev, int test) ret = qlcnic_fw_create_ctx(adapter); if (ret) { qlcnic_detach(adapter); + if (adapter_state == QLCNIC_ADAPTER_UP_MAGIC) { + adapter->max_sds_rings = num_sds_ring; + qlcnic_attach(adapter); + } netif_device_attach(netdev); return ret; } @@ -1596,7 +1602,8 @@ int qlcnic_83xx_loopback_test(struct net_device *netdev, u8 mode) if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state)) return -EBUSY; - ret = qlcnic_83xx_diag_alloc_res(netdev, QLCNIC_LOOPBACK_TEST); + ret = qlcnic_83xx_diag_alloc_res(netdev, QLCNIC_LOOPBACK_TEST, + max_sds_rings); if (ret) goto fail_diag_alloc; @@ -3112,7 +3119,8 @@ int qlcnic_83xx_interrupt_test(struct net_device *netdev) if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state)) return -EIO; - ret = qlcnic_83xx_diag_alloc_res(netdev, QLCNIC_INTERRUPT_TEST); + ret = qlcnic_83xx_diag_alloc_res(netdev, QLCNIC_INTERRUPT_TEST, + max_sds_rings); if (ret) goto fail_diag_irq; -- cgit v0.10.2 From 9106e5db8336d5048ac79f72056572c461a2566b Mon Sep 17 00:00:00 2001 From: Rajesh Borundia Date: Thu, 9 May 2013 09:25:15 +0000 Subject: qlcnic: Fix mailbox response handling. o Fix mailbox response poll time to maximum 5 seconds which includes mailbox response time as well as time required for processing AEN if any. o Driver need to read firmware control mailbox register instead of host control mailbox register. Signed-off-by: Jitendra Kalsaria Signed-off-by: Rajesh Borundia Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index 7b5cb61..b4ff1e3 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -696,15 +696,14 @@ u32 qlcnic_83xx_mac_rcode(struct qlcnic_adapter *adapter) return 1; } -u32 qlcnic_83xx_mbx_poll(struct qlcnic_adapter *adapter) +u32 qlcnic_83xx_mbx_poll(struct qlcnic_adapter *adapter, u32 *wait_time) { u32 data; - unsigned long wait_time = 0; struct qlcnic_hardware_context *ahw = adapter->ahw; /* wait for mailbox completion */ do { data = QLCRDX(ahw, QLCNIC_FW_MBX_CTRL); - if (++wait_time > QLCNIC_MBX_TIMEOUT) { + if (++(*wait_time) > QLCNIC_MBX_TIMEOUT) { data = QLCNIC_RCODE_TIMEOUT; break; } @@ -720,8 +719,8 @@ int qlcnic_83xx_mbx_op(struct qlcnic_adapter *adapter, u16 opcode; u8 mbx_err_code; unsigned long flags; - u32 rsp, mbx_val, fw_data, rsp_num, mbx_cmd; struct qlcnic_hardware_context *ahw = adapter->ahw; + u32 rsp, mbx_val, fw_data, rsp_num, mbx_cmd, wait_time = 0; opcode = LSW(cmd->req.arg[0]); if (!test_bit(QLC_83XX_MBX_READY, &adapter->ahw->idc.status)) { @@ -754,15 +753,13 @@ int qlcnic_83xx_mbx_op(struct qlcnic_adapter *adapter, /* Signal FW about the impending command */ QLCWRX(ahw, QLCNIC_HOST_MBX_CTRL, QLCNIC_SET_OWNER); poll: - rsp = qlcnic_83xx_mbx_poll(adapter); + rsp = qlcnic_83xx_mbx_poll(adapter, &wait_time); if (rsp != QLCNIC_RCODE_TIMEOUT) { /* Get the FW response data */ fw_data = readl(QLCNIC_MBX_FW(ahw, 0)); if (fw_data & QLCNIC_MBX_ASYNC_EVENT) { __qlcnic_83xx_process_aen(adapter); - mbx_val = QLCRDX(ahw, QLCNIC_HOST_MBX_CTRL); - if (mbx_val) - goto poll; + goto poll; } mbx_err_code = QLCNIC_MBX_STATUS(fw_data); rsp_num = QLCNIC_MBX_NUM_REGS(fw_data); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h index faf5553..f5db67f 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h @@ -620,7 +620,7 @@ int qlcnic_83xx_flash_test(struct qlcnic_adapter *); int qlcnic_83xx_enable_flash_write(struct qlcnic_adapter *); int qlcnic_83xx_disable_flash_write(struct qlcnic_adapter *); u32 qlcnic_83xx_mac_rcode(struct qlcnic_adapter *); -u32 qlcnic_83xx_mbx_poll(struct qlcnic_adapter *); +u32 qlcnic_83xx_mbx_poll(struct qlcnic_adapter *, u32 *); void qlcnic_83xx_enable_mbx_poll(struct qlcnic_adapter *); void qlcnic_83xx_disable_mbx_poll(struct qlcnic_adapter *); #endif diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h index 95b1b57..b6818f4 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h @@ -134,7 +134,7 @@ struct qlcnic_mailbox_metadata { #define QLCNIC_SET_OWNER 1 #define QLCNIC_CLR_OWNER 0 -#define QLCNIC_MBX_TIMEOUT 10000 +#define QLCNIC_MBX_TIMEOUT 5000 #define QLCNIC_MBX_RSP_OK 1 #define QLCNIC_MBX_PORT_RSP_OK 0x1a diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c index 44d547d..3869c38 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c @@ -280,9 +280,9 @@ void qlcnic_sriov_cleanup(struct qlcnic_adapter *adapter) static int qlcnic_sriov_post_bc_msg(struct qlcnic_adapter *adapter, u32 *hdr, u32 *pay, u8 pci_func, u8 size) { + u32 rsp, mbx_val, fw_data, rsp_num, mbx_cmd, val, wait_time = 0; struct qlcnic_hardware_context *ahw = adapter->ahw; unsigned long flags; - u32 rsp, mbx_val, fw_data, rsp_num, mbx_cmd, val; u16 opcode; u8 mbx_err_code; int i, j; @@ -330,15 +330,13 @@ static int qlcnic_sriov_post_bc_msg(struct qlcnic_adapter *adapter, u32 *hdr, * assume something is wrong. */ poll: - rsp = qlcnic_83xx_mbx_poll(adapter); + rsp = qlcnic_83xx_mbx_poll(adapter, &wait_time); if (rsp != QLCNIC_RCODE_TIMEOUT) { /* Get the FW response data */ fw_data = readl(QLCNIC_MBX_FW(ahw, 0)); if (fw_data & QLCNIC_MBX_ASYNC_EVENT) { __qlcnic_83xx_process_aen(adapter); - mbx_val = QLCRDX(ahw, QLCNIC_HOST_MBX_CTRL); - if (mbx_val) - goto poll; + goto poll; } mbx_err_code = QLCNIC_MBX_STATUS(fw_data); rsp_num = QLCNIC_MBX_NUM_REGS(fw_data); -- cgit v0.10.2 From cbccb18f4f937132af64a95ae04186a6c2c05236 Mon Sep 17 00:00:00 2001 From: Rajesh Borundia Date: Thu, 9 May 2013 09:25:16 +0000 Subject: qlcnic: Fix validation of link event command. o VF driver that has enabled asynchronous link events may not set BIT_8 in the request, if it does not require link state in the response. Signed-off-by: Pratik Pujar Signed-off-by: Rajesh Borundia Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c index c81be2d..1a66ccd 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c @@ -1133,9 +1133,6 @@ static int qlcnic_sriov_validate_linkevent(struct qlcnic_vf_info *vf, if ((cmd->req.arg[1] >> 16) != vf->rx_ctx_id) return -EINVAL; - if (!(cmd->req.arg[1] & BIT_8)) - return -EINVAL; - return 0; } -- cgit v0.10.2 From a549984b8c95acbecefd1fdd4bfdbea4d29b0588 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 11 May 2013 19:07:42 -0400 Subject: ext4: revert "ext4: use io_end for multiple bios" This reverts commit 4eec708d263f0ee10861d69251708a225b64cac7. Multiple users have reported crashes which is apparently caused by this commit. Thanks to Dmitry Monakhov for bisecting it. Signed-off-by: "Theodore Ts'o" Cc: Dmitry Monakhov Cc: Jan Kara diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 0aabb34..5aae3d1 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -209,7 +209,6 @@ typedef struct ext4_io_end { ssize_t size; /* size of the extent */ struct kiocb *iocb; /* iocb struct for AIO */ int result; /* error value for AIO */ - atomic_t count; /* reference counter */ } ext4_io_end_t; struct ext4_io_submit { @@ -2651,14 +2650,11 @@ extern int ext4_move_extents(struct file *o_filp, struct file *d_filp, /* page-io.c */ extern int __init ext4_init_pageio(void); +extern void ext4_add_complete_io(ext4_io_end_t *io_end); extern void ext4_exit_pageio(void); extern void ext4_ioend_shutdown(struct inode *); +extern void ext4_free_io_end(ext4_io_end_t *io); extern ext4_io_end_t *ext4_init_io_end(struct inode *inode, gfp_t flags); -extern ext4_io_end_t *ext4_get_io_end(ext4_io_end_t *io_end); -extern int ext4_put_io_end(ext4_io_end_t *io_end); -extern void ext4_put_io_end_defer(ext4_io_end_t *io_end); -extern void ext4_io_submit_init(struct ext4_io_submit *io, - struct writeback_control *wbc); extern void ext4_end_io_work(struct work_struct *work); extern void ext4_io_submit(struct ext4_io_submit *io); extern int ext4_bio_write_page(struct ext4_io_submit *io, diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 793d44b..d666569 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1487,10 +1487,7 @@ static int mpage_da_submit_io(struct mpage_da_data *mpd, struct ext4_io_submit io_submit; BUG_ON(mpd->next_page <= mpd->first_page); - ext4_io_submit_init(&io_submit, mpd->wbc); - io_submit.io_end = ext4_init_io_end(inode, GFP_NOFS); - if (!io_submit.io_end) - return -ENOMEM; + memset(&io_submit, 0, sizeof(io_submit)); /* * We need to start from the first_page to the next_page - 1 * to make sure we also write the mapped dirty buffer_heads. @@ -1578,8 +1575,6 @@ static int mpage_da_submit_io(struct mpage_da_data *mpd, pagevec_release(&pvec); } ext4_io_submit(&io_submit); - /* Drop io_end reference we got from init */ - ext4_put_io_end_defer(io_submit.io_end); return ret; } @@ -2238,16 +2233,9 @@ static int ext4_writepage(struct page *page, */ return __ext4_journalled_writepage(page, len); - ext4_io_submit_init(&io_submit, wbc); - io_submit.io_end = ext4_init_io_end(inode, GFP_NOFS); - if (!io_submit.io_end) { - redirty_page_for_writepage(wbc, page); - return -ENOMEM; - } + memset(&io_submit, 0, sizeof(io_submit)); ret = ext4_bio_write_page(&io_submit, page, len, wbc); ext4_io_submit(&io_submit); - /* Drop io_end reference we got from init */ - ext4_put_io_end_defer(io_submit.io_end); return ret; } @@ -3078,13 +3066,9 @@ static void ext4_end_io_dio(struct kiocb *iocb, loff_t offset, struct inode *inode = file_inode(iocb->ki_filp); ext4_io_end_t *io_end = iocb->private; - /* if not async direct IO just return */ - if (!io_end) { - inode_dio_done(inode); - if (is_async) - aio_complete(iocb, ret, 0); - return; - } + /* if not async direct IO or dio with 0 bytes write, just return */ + if (!io_end || !size) + goto out; ext_debug("ext4_end_io_dio(): io_end 0x%p " "for inode %lu, iocb 0x%p, offset %llu, size %zd\n", @@ -3092,13 +3076,25 @@ static void ext4_end_io_dio(struct kiocb *iocb, loff_t offset, size); iocb->private = NULL; + + /* if not aio dio with unwritten extents, just free io and return */ + if (!(io_end->flag & EXT4_IO_END_UNWRITTEN)) { + ext4_free_io_end(io_end); +out: + inode_dio_done(inode); + if (is_async) + aio_complete(iocb, ret, 0); + return; + } + io_end->offset = offset; io_end->size = size; if (is_async) { io_end->iocb = iocb; io_end->result = ret; } - ext4_put_io_end_defer(io_end); + + ext4_add_complete_io(io_end); } /* @@ -3132,7 +3128,6 @@ static ssize_t ext4_ext_direct_IO(int rw, struct kiocb *iocb, get_block_t *get_block_func = NULL; int dio_flags = 0; loff_t final_size = offset + count; - ext4_io_end_t *io_end = NULL; /* Use the old path for reads and writes beyond i_size. */ if (rw != WRITE || final_size > inode->i_size) @@ -3171,16 +3166,13 @@ static ssize_t ext4_ext_direct_IO(int rw, struct kiocb *iocb, iocb->private = NULL; ext4_inode_aio_set(inode, NULL); if (!is_sync_kiocb(iocb)) { - io_end = ext4_init_io_end(inode, GFP_NOFS); + ext4_io_end_t *io_end = ext4_init_io_end(inode, GFP_NOFS); if (!io_end) { ret = -ENOMEM; goto retake_lock; } io_end->flag |= EXT4_IO_END_DIRECT; - /* - * Grab reference for DIO. Will be dropped in ext4_end_io_dio() - */ - iocb->private = ext4_get_io_end(io_end); + iocb->private = io_end; /* * we save the io structure for current async direct * IO, so that later ext4_map_blocks() could flag the @@ -3204,27 +3196,26 @@ static ssize_t ext4_ext_direct_IO(int rw, struct kiocb *iocb, NULL, dio_flags); + if (iocb->private) + ext4_inode_aio_set(inode, NULL); /* - * Put our reference to io_end. This can free the io_end structure e.g. - * in sync IO case or in case of error. It can even perform extent - * conversion if all bios we submitted finished before we got here. - * Note that in that case iocb->private can be already set to NULL - * here. + * The io_end structure takes a reference to the inode, that + * structure needs to be destroyed and the reference to the + * inode need to be dropped, when IO is complete, even with 0 + * byte write, or failed. + * + * In the successful AIO DIO case, the io_end structure will + * be destroyed and the reference to the inode will be dropped + * after the end_io call back function is called. + * + * In the case there is 0 byte write, or error case, since VFS + * direct IO won't invoke the end_io call back function, we + * need to free the end_io structure here. */ - if (io_end) { - ext4_inode_aio_set(inode, NULL); - ext4_put_io_end(io_end); - /* - * In case of error or no write ext4_end_io_dio() was not - * called so we have to put iocb's reference. - */ - if (ret <= 0 && ret != -EIOCBQUEUED) { - WARN_ON(iocb->private != io_end); - ext4_put_io_end(io_end); - iocb->private = NULL; - } - } - if (ret > 0 && !overwrite && ext4_test_inode_state(inode, + if (ret != -EIOCBQUEUED && ret <= 0 && iocb->private) { + ext4_free_io_end(iocb->private); + iocb->private = NULL; + } else if (ret > 0 && !overwrite && ext4_test_inode_state(inode, EXT4_STATE_DIO_UNWRITTEN)) { int err; /* diff --git a/fs/ext4/page-io.c b/fs/ext4/page-io.c index 5929cd0..6626aba 100644 --- a/fs/ext4/page-io.c +++ b/fs/ext4/page-io.c @@ -61,28 +61,15 @@ void ext4_ioend_shutdown(struct inode *inode) cancel_work_sync(&EXT4_I(inode)->i_unwritten_work); } -static void ext4_release_io_end(ext4_io_end_t *io_end) +void ext4_free_io_end(ext4_io_end_t *io) { - BUG_ON(!list_empty(&io_end->list)); - BUG_ON(io_end->flag & EXT4_IO_END_UNWRITTEN); - - if (atomic_dec_and_test(&EXT4_I(io_end->inode)->i_ioend_count)) - wake_up_all(ext4_ioend_wq(io_end->inode)); - if (io_end->flag & EXT4_IO_END_DIRECT) - inode_dio_done(io_end->inode); - if (io_end->iocb) - aio_complete(io_end->iocb, io_end->result, 0); - kmem_cache_free(io_end_cachep, io_end); -} - -static void ext4_clear_io_unwritten_flag(ext4_io_end_t *io_end) -{ - struct inode *inode = io_end->inode; + BUG_ON(!io); + BUG_ON(!list_empty(&io->list)); + BUG_ON(io->flag & EXT4_IO_END_UNWRITTEN); - io_end->flag &= ~EXT4_IO_END_UNWRITTEN; - /* Wake up anyone waiting on unwritten extent conversion */ - if (atomic_dec_and_test(&EXT4_I(inode)->i_unwritten)) - wake_up_all(ext4_ioend_wq(inode)); + if (atomic_dec_and_test(&EXT4_I(io->inode)->i_ioend_count)) + wake_up_all(ext4_ioend_wq(io->inode)); + kmem_cache_free(io_end_cachep, io); } /* check a range of space and convert unwritten extents to written. */ @@ -105,8 +92,13 @@ static int ext4_end_io(ext4_io_end_t *io) "(inode %lu, offset %llu, size %zd, error %d)", inode->i_ino, offset, size, ret); } - ext4_clear_io_unwritten_flag(io); - ext4_release_io_end(io); + /* Wake up anyone waiting on unwritten extent conversion */ + if (atomic_dec_and_test(&EXT4_I(inode)->i_unwritten)) + wake_up_all(ext4_ioend_wq(inode)); + if (io->flag & EXT4_IO_END_DIRECT) + inode_dio_done(inode); + if (io->iocb) + aio_complete(io->iocb, io->result, 0); return ret; } @@ -137,7 +129,7 @@ static void dump_completed_IO(struct inode *inode) } /* Add the io_end to per-inode completed end_io list. */ -static void ext4_add_complete_io(ext4_io_end_t *io_end) +void ext4_add_complete_io(ext4_io_end_t *io_end) { struct ext4_inode_info *ei = EXT4_I(io_end->inode); struct workqueue_struct *wq; @@ -174,6 +166,8 @@ static int ext4_do_flush_completed_IO(struct inode *inode) err = ext4_end_io(io); if (unlikely(!ret && err)) ret = err; + io->flag &= ~EXT4_IO_END_UNWRITTEN; + ext4_free_io_end(io); } return ret; } @@ -205,43 +199,10 @@ ext4_io_end_t *ext4_init_io_end(struct inode *inode, gfp_t flags) atomic_inc(&EXT4_I(inode)->i_ioend_count); io->inode = inode; INIT_LIST_HEAD(&io->list); - atomic_set(&io->count, 1); } return io; } -void ext4_put_io_end_defer(ext4_io_end_t *io_end) -{ - if (atomic_dec_and_test(&io_end->count)) { - if (!(io_end->flag & EXT4_IO_END_UNWRITTEN) || !io_end->size) { - ext4_release_io_end(io_end); - return; - } - ext4_add_complete_io(io_end); - } -} - -int ext4_put_io_end(ext4_io_end_t *io_end) -{ - int err = 0; - - if (atomic_dec_and_test(&io_end->count)) { - if (io_end->flag & EXT4_IO_END_UNWRITTEN) { - err = ext4_convert_unwritten_extents(io_end->inode, - io_end->offset, io_end->size); - ext4_clear_io_unwritten_flag(io_end); - } - ext4_release_io_end(io_end); - } - return err; -} - -ext4_io_end_t *ext4_get_io_end(ext4_io_end_t *io_end) -{ - atomic_inc(&io_end->count); - return io_end; -} - /* * Print an buffer I/O error compatible with the fs/buffer.c. This * provides compatibility with dmesg scrapers that look for a specific @@ -324,7 +285,12 @@ static void ext4_end_bio(struct bio *bio, int error) bi_sector >> (inode->i_blkbits - 9)); } - ext4_put_io_end_defer(io_end); + if (!(io_end->flag & EXT4_IO_END_UNWRITTEN)) { + ext4_free_io_end(io_end); + return; + } + + ext4_add_complete_io(io_end); } void ext4_io_submit(struct ext4_io_submit *io) @@ -338,37 +304,40 @@ void ext4_io_submit(struct ext4_io_submit *io) bio_put(io->io_bio); } io->io_bio = NULL; -} - -void ext4_io_submit_init(struct ext4_io_submit *io, - struct writeback_control *wbc) -{ - io->io_op = (wbc->sync_mode == WB_SYNC_ALL ? WRITE_SYNC : WRITE); - io->io_bio = NULL; + io->io_op = 0; io->io_end = NULL; } -static int io_submit_init_bio(struct ext4_io_submit *io, - struct buffer_head *bh) +static int io_submit_init(struct ext4_io_submit *io, + struct inode *inode, + struct writeback_control *wbc, + struct buffer_head *bh) { + ext4_io_end_t *io_end; + struct page *page = bh->b_page; int nvecs = bio_get_nr_vecs(bh->b_bdev); struct bio *bio; + io_end = ext4_init_io_end(inode, GFP_NOFS); + if (!io_end) + return -ENOMEM; bio = bio_alloc(GFP_NOIO, min(nvecs, BIO_MAX_PAGES)); bio->bi_sector = bh->b_blocknr * (bh->b_size >> 9); bio->bi_bdev = bh->b_bdev; + bio->bi_private = io->io_end = io_end; bio->bi_end_io = ext4_end_bio; - bio->bi_private = ext4_get_io_end(io->io_end); - if (!io->io_end->size) - io->io_end->offset = (bh->b_page->index << PAGE_CACHE_SHIFT) - + bh_offset(bh); + + io_end->offset = (page->index << PAGE_CACHE_SHIFT) + bh_offset(bh); + io->io_bio = bio; + io->io_op = (wbc->sync_mode == WB_SYNC_ALL ? WRITE_SYNC : WRITE); io->io_next_block = bh->b_blocknr; return 0; } static int io_submit_add_bh(struct ext4_io_submit *io, struct inode *inode, + struct writeback_control *wbc, struct buffer_head *bh) { ext4_io_end_t *io_end; @@ -379,18 +348,18 @@ submit_and_retry: ext4_io_submit(io); } if (io->io_bio == NULL) { - ret = io_submit_init_bio(io, bh); + ret = io_submit_init(io, inode, wbc, bh); if (ret) return ret; } - ret = bio_add_page(io->io_bio, bh->b_page, bh->b_size, bh_offset(bh)); - if (ret != bh->b_size) - goto submit_and_retry; io_end = io->io_end; if (test_clear_buffer_uninit(bh)) ext4_set_io_unwritten_flag(inode, io_end); - io_end->size += bh->b_size; + io->io_end->size += bh->b_size; io->io_next_block++; + ret = bio_add_page(io->io_bio, bh->b_page, bh->b_size, bh_offset(bh)); + if (ret != bh->b_size) + goto submit_and_retry; return 0; } @@ -462,7 +431,7 @@ int ext4_bio_write_page(struct ext4_io_submit *io, do { if (!buffer_async_write(bh)) continue; - ret = io_submit_add_bh(io, inode, bh); + ret = io_submit_add_bh(io, inode, wbc, bh); if (ret) { /* * We only get here on ENOMEM. Not much else -- cgit v0.10.2 From 4849625569874d474ce351efd84b1f487ba08c94 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 8 May 2013 21:08:22 +0000 Subject: net: fec: enable hardware checksum only on imx6q-fec Commit 4c09eed (net: fec: Enable imx6 enet checksum acceleration.) enables hardware checksum acceleration unconditionally for all fec variants. This is inappropriate, because some variants like imx5 have no such support on hardware. Consequently, fec is broken on these platforms. Fix it by enabling hardware checksum only on imx6q-fec type of controllers. Signed-off-by: Shawn Guo Reviewed-by: Jim Baxter Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index aff0310..ca9825c 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -87,6 +87,8 @@ #define FEC_QUIRK_HAS_GBIT (1 << 3) /* Controller has extend desc buffer */ #define FEC_QUIRK_HAS_BUFDESC_EX (1 << 4) +/* Controller has hardware checksum support */ +#define FEC_QUIRK_HAS_CSUM (1 << 5) static struct platform_device_id fec_devtype[] = { { @@ -105,7 +107,7 @@ static struct platform_device_id fec_devtype[] = { }, { .name = "imx6q-fec", .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT | - FEC_QUIRK_HAS_BUFDESC_EX, + FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM, }, { .name = "mvf-fec", .driver_data = FEC_QUIRK_ENET_MAC, @@ -1744,6 +1746,8 @@ static const struct net_device_ops fec_netdev_ops = { static int fec_enet_init(struct net_device *ndev) { struct fec_enet_private *fep = netdev_priv(ndev); + const struct platform_device_id *id_entry = + platform_get_device_id(fep->pdev); struct bufdesc *cbd_base; /* Allocate memory for buffer descriptors. */ @@ -1775,12 +1779,14 @@ static int fec_enet_init(struct net_device *ndev) writel(FEC_RX_DISABLED_IMASK, fep->hwp + FEC_IMASK); netif_napi_add(ndev, &fep->napi, fec_enet_rx_napi, FEC_NAPI_WEIGHT); - /* enable hw accelerator */ - ndev->features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM - | NETIF_F_RXCSUM); - ndev->hw_features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM - | NETIF_F_RXCSUM); - fep->csum_flags |= FLAG_RX_CSUM_ENABLED; + if (id_entry->driver_data & FEC_QUIRK_HAS_CSUM) { + /* enable hw accelerator */ + ndev->features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM + | NETIF_F_RXCSUM); + ndev->hw_features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM + | NETIF_F_RXCSUM); + fep->csum_flags |= FLAG_RX_CSUM_ENABLED; + } fec_restart(ndev, 0); -- cgit v0.10.2 From 4e8cf5b8a1da8dbe1ece5f084b99f5c902ea709b Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Wed, 8 May 2013 22:22:34 +0000 Subject: net/mlx4_core: Add missing report on VST and spoof-checking dev caps Commits e6b6a23 "net/mlx4: Add VF MAC spoof checking support" and 3f7fb021 "net/mlx4: Add set VF default vlan ID and priority support" missed reporting in the device capabilities dump when these features are actually supported. Also two too noisy debug messages which produce message on every QP opened by a VF, were left in the code, fix that. Signed-off-by: Rony Efraim Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c index b147bdd..58a8e53 100644 --- a/drivers/net/ethernet/mellanox/mlx4/fw.c +++ b/drivers/net/ethernet/mellanox/mlx4/fw.c @@ -131,7 +131,9 @@ static void dump_dev_cap_flags2(struct mlx4_dev *dev, u64 flags) [2] = "RSS XOR Hash Function support", [3] = "Device manage flow steering support", [4] = "Automatic MAC reassignment support", - [5] = "Time stamping support" + [5] = "Time stamping support", + [6] = "VST (control vlan insertion/stripping) support", + [7] = "FSM (MAC anti-spoofing) support" }; int i; diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index e12e0d2..d4a9de6 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -377,19 +377,10 @@ static int update_vport_qp_param(struct mlx4_dev *dev, qpc->pri_path.feup |= 1 << 3; /* set fvl bit */ qpc->pri_path.sched_queue &= 0xC7; qpc->pri_path.sched_queue |= (vp_oper->state.default_qos) << 3; - mlx4_dbg(dev, "qp %d port %d Q 0x%x set vlan to %d vidx %d feup %x fl %x\n", - be32_to_cpu(qpc->local_qpn) & 0xffffff, port, - (int)(qpc->pri_path.sched_queue), vp_oper->state.default_vlan, - vp_oper->vlan_idx, (int)(qpc->pri_path.feup), - (int)(qpc->pri_path.fl)); } if (vp_oper->state.spoofchk) { qpc->pri_path.feup |= 1 << 5; /* set fsm bit */; qpc->pri_path.grh_mylmc = (0x80 & qpc->pri_path.grh_mylmc) + vp_oper->mac_idx; - mlx4_dbg(dev, "spoof qp %d port %d feup 0x%x, myLmc 0x%x mindx %d\n", - be32_to_cpu(qpc->local_qpn) & 0xffffff, port, - (int)qpc->pri_path.feup, (int)qpc->pri_path.grh_mylmc, - vp_oper->mac_idx); } return 0; } -- cgit v0.10.2 From 7677fc965fba41d1386fa3b76a1f00303f02bb2d Mon Sep 17 00:00:00 2001 From: Rony Efraim Date: Wed, 8 May 2013 22:22:35 +0000 Subject: net/mlx4: Strengthen VLAN tags/priorities enforcement in VST mode Make sure that the following steps are taken: - drop packets sent by the VF with vlan tag - block packets with vlan tag which are steered to the VF - drop/block tagged packets when the policy is priority-tagged - make sure VLAN stripping for received packets is set - make sure force UP bit for the VF QP is set Use enum values for all the above instead of numerical bit offsets. Signed-off-by: Rony Efraim Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_resources.c b/drivers/net/ethernet/mellanox/mlx4/en_resources.c index 91f2b2c..d3f5086 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_resources.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_resources.c @@ -60,7 +60,7 @@ void mlx4_en_fill_qp_context(struct mlx4_en_priv *priv, int size, int stride, context->pri_path.sched_queue = 0x83 | (priv->port - 1) << 6; if (user_prio >= 0) { context->pri_path.sched_queue |= user_prio << 3; - context->pri_path.feup = 1 << 6; + context->pri_path.feup = MLX4_FEUP_FORCE_ETH_UP; } context->pri_path.counter_index = 0xff; context->cqn_send = cpu_to_be32(cqn); diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index d4a9de6..1157f02 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -372,14 +372,28 @@ static int update_vport_qp_param(struct mlx4_dev *dev, if (MLX4_QP_ST_RC == qp_type) return -EINVAL; + /* force strip vlan by clear vsd */ + qpc->param3 &= ~cpu_to_be32(MLX4_STRIP_VLAN); + if (0 != vp_oper->state.default_vlan) { + qpc->pri_path.vlan_control = + MLX4_VLAN_CTRL_ETH_TX_BLOCK_TAGGED | + MLX4_VLAN_CTRL_ETH_RX_BLOCK_PRIO_TAGGED | + MLX4_VLAN_CTRL_ETH_RX_BLOCK_UNTAGGED; + } else { /* priority tagged */ + qpc->pri_path.vlan_control = + MLX4_VLAN_CTRL_ETH_TX_BLOCK_TAGGED | + MLX4_VLAN_CTRL_ETH_RX_BLOCK_TAGGED; + } + + qpc->pri_path.fvl_rx |= MLX4_FVL_RX_FORCE_ETH_VLAN; qpc->pri_path.vlan_index = vp_oper->vlan_idx; - qpc->pri_path.fl = (1 << 6) | (1 << 2); /* set cv bit and hide_cqe_vlan bit*/ - qpc->pri_path.feup |= 1 << 3; /* set fvl bit */ + qpc->pri_path.fl |= MLX4_FL_CV | MLX4_FL_ETH_HIDE_CQE_VLAN; + qpc->pri_path.feup |= MLX4_FEUP_FORCE_ETH_UP | MLX4_FVL_FORCE_ETH_VLAN; qpc->pri_path.sched_queue &= 0xC7; qpc->pri_path.sched_queue |= (vp_oper->state.default_qos) << 3; } if (vp_oper->state.spoofchk) { - qpc->pri_path.feup |= 1 << 5; /* set fsm bit */; + qpc->pri_path.feup |= MLX4_FSM_FORCE_ETH_SRC_MAC; qpc->pri_path.grh_mylmc = (0x80 & qpc->pri_path.grh_mylmc) + vp_oper->mac_idx; } return 0; diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h index 67f46ad..352eec9 100644 --- a/include/linux/mlx4/qp.h +++ b/include/linux/mlx4/qp.h @@ -126,7 +126,7 @@ struct mlx4_rss_context { struct mlx4_qp_path { u8 fl; - u8 reserved1[1]; + u8 vlan_control; u8 disable_pkey_check; u8 pkey_index; u8 counter_index; @@ -141,11 +141,32 @@ struct mlx4_qp_path { u8 sched_queue; u8 vlan_index; u8 feup; - u8 reserved3; + u8 fvl_rx; u8 reserved4[2]; u8 dmac[6]; }; +enum { /* fl */ + MLX4_FL_CV = 1 << 6, + MLX4_FL_ETH_HIDE_CQE_VLAN = 1 << 2 +}; +enum { /* vlan_control */ + MLX4_VLAN_CTRL_ETH_TX_BLOCK_TAGGED = 1 << 6, + MLX4_VLAN_CTRL_ETH_RX_BLOCK_TAGGED = 1 << 2, + MLX4_VLAN_CTRL_ETH_RX_BLOCK_PRIO_TAGGED = 1 << 1, /* 802.1p priority tag */ + MLX4_VLAN_CTRL_ETH_RX_BLOCK_UNTAGGED = 1 << 0 +}; + +enum { /* feup */ + MLX4_FEUP_FORCE_ETH_UP = 1 << 6, /* force Eth UP */ + MLX4_FSM_FORCE_ETH_SRC_MAC = 1 << 5, /* force Source MAC */ + MLX4_FVL_FORCE_ETH_VLAN = 1 << 3 /* force Eth vlan */ +}; + +enum { /* fvl_rx */ + MLX4_FVL_RX_FORCE_ETH_VLAN = 1 << 0 /* enforce Eth rx vlan */ +}; + struct mlx4_qp_context { __be32 flags; __be32 pd; @@ -185,6 +206,10 @@ struct mlx4_qp_context { u32 reserved5[10]; }; +enum { /* param3 */ + MLX4_STRIP_VLAN = 1 << 30 +}; + /* Which firmware version adds support for NEC (NoErrorCompletion) bit */ #define MLX4_FW_VER_WQE_CTRL_NEC mlx4_fw_ver(2, 2, 232) -- cgit v0.10.2 From 2fbd967973ae6ae1a989f5638da8bbed93cad2c5 Mon Sep 17 00:00:00 2001 From: Denis Efremov Date: Wed, 8 May 2013 23:19:42 +0000 Subject: ipv4: ip_output: remove inline marking of EXPORT_SYMBOL functions EXPORT_SYMBOL and inline directives are contradictory to each other. The patch fixes this inconsistency. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Denis Efremov Signed-off-by: David S. Miller diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index 147abf5..4bcabf3 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -84,7 +84,7 @@ int sysctl_ip_default_ttl __read_mostly = IPDEFTTL; EXPORT_SYMBOL(sysctl_ip_default_ttl); /* Generate a checksum for an outgoing IP datagram. */ -__inline__ void ip_send_check(struct iphdr *iph) +void ip_send_check(struct iphdr *iph) { iph->check = 0; iph->check = ip_fast_csum((unsigned char *)iph, iph->ihl); -- cgit v0.10.2 From 52c07423a819091b0fe9abbf26977098b996f85b Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Sat, 11 May 2013 16:16:49 -0700 Subject: target/rd: Add ramdisk bit for NULLIO operation This patch adds a rd_nullio parameter that allows RAMDISK_MCP backends to function in NULLIO mode, where all se_cmd I/O is immediately completed in rd_execute_rw() without actually performing the SGL memory copy. This is useful for performance testing when the ramdisk SGL memory copy begins to eat lots of cycles during heavy small block workloads, so allow this bit to be enabled when necessary on a per rd_dev basis. Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_rd.c b/drivers/target/target_core_rd.c index e0b3c37..0921a64 100644 --- a/drivers/target/target_core_rd.c +++ b/drivers/target/target_core_rd.c @@ -291,6 +291,11 @@ rd_execute_rw(struct se_cmd *cmd) u32 src_len; u64 tmp; + if (dev->rd_flags & RDF_NULLIO) { + target_complete_cmd(cmd, SAM_STAT_GOOD); + return 0; + } + tmp = cmd->t_task_lba * se_dev->dev_attrib.block_size; rd_offset = do_div(tmp, PAGE_SIZE); rd_page = tmp; @@ -373,11 +378,12 @@ rd_execute_rw(struct se_cmd *cmd) } enum { - Opt_rd_pages, Opt_err + Opt_rd_pages, Opt_rd_nullio, Opt_err }; static match_table_t tokens = { {Opt_rd_pages, "rd_pages=%d"}, + {Opt_rd_nullio, "rd_nullio=%d"}, {Opt_err, NULL} }; @@ -408,6 +414,14 @@ static ssize_t rd_set_configfs_dev_params(struct se_device *dev, " Count: %u\n", rd_dev->rd_page_count); rd_dev->rd_flags |= RDF_HAS_PAGE_COUNT; break; + case Opt_rd_nullio: + match_int(args, &arg); + if (arg != 1) + break; + + pr_debug("RAMDISK: Setting NULLIO flag: %d\n", arg); + rd_dev->rd_flags |= RDF_NULLIO; + break; default: break; } @@ -424,8 +438,9 @@ static ssize_t rd_show_configfs_dev_params(struct se_device *dev, char *b) ssize_t bl = sprintf(b, "TCM RamDisk ID: %u RamDisk Makeup: rd_mcp\n", rd_dev->rd_dev_id); bl += sprintf(b + bl, " PAGES/PAGE_SIZE: %u*%lu" - " SG_table_count: %u\n", rd_dev->rd_page_count, - PAGE_SIZE, rd_dev->sg_table_count); + " SG_table_count: %u nullio: %d\n", rd_dev->rd_page_count, + PAGE_SIZE, rd_dev->sg_table_count, + !!(rd_dev->rd_flags & RDF_NULLIO)); return bl; } diff --git a/drivers/target/target_core_rd.h b/drivers/target/target_core_rd.h index 933b38b..1789d1e 100644 --- a/drivers/target/target_core_rd.h +++ b/drivers/target/target_core_rd.h @@ -22,6 +22,7 @@ struct rd_dev_sg_table { } ____cacheline_aligned; #define RDF_HAS_PAGE_COUNT 0x01 +#define RDF_NULLIO 0x02 struct rd_dev { struct se_device dev; -- cgit v0.10.2 From 233c7df0821c4190e2d3f4be0f2ca0ab40a5ed8c Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 9 May 2013 04:23:40 +0000 Subject: macvlan: fix passthru mode race between dev removal and rx path Currently, if macvlan in passthru mode is created and data are rxed and you remove this device, following panic happens: NULL pointer dereference at 0000000000000198 IP: [] macvlan_handle_frame+0x153/0x1f7 [macvlan] I'm using following script to trigger this: I run this script while "ping -f" is running on another machine to send packets to e1 rx. Reason of the panic is that list_first_entry() is blindly called in macvlan_handle_frame() even if the list was empty. vlan is set to incorrect pointer which leads to the crash. I'm fixing this by protecting port->vlans list by rcu and by preventing from getting incorrect pointer in case the list is empty. Introduced by: commit eb06acdc85585f2 "macvlan: Introduce 'passthru' mode to takeover the underlying device" Signed-off-by: Jiri Pirko Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index d5a141c..1c502bb 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -229,7 +229,8 @@ static rx_handler_result_t macvlan_handle_frame(struct sk_buff **pskb) } if (port->passthru) - vlan = list_first_entry(&port->vlans, struct macvlan_dev, list); + vlan = list_first_or_null_rcu(&port->vlans, + struct macvlan_dev, list); else vlan = macvlan_hash_lookup(port, eth->h_dest); if (vlan == NULL) @@ -814,7 +815,7 @@ int macvlan_common_newlink(struct net *src_net, struct net_device *dev, if (err < 0) goto upper_dev_unlink; - list_add_tail(&vlan->list, &port->vlans); + list_add_tail_rcu(&vlan->list, &port->vlans); netif_stacked_transfer_operstate(lowerdev, dev); return 0; @@ -842,7 +843,7 @@ void macvlan_dellink(struct net_device *dev, struct list_head *head) { struct macvlan_dev *vlan = netdev_priv(dev); - list_del(&vlan->list); + list_del_rcu(&vlan->list); unregister_netdevice_queue(dev, head); netdev_upper_dev_unlink(vlan->lowerdev, dev); } -- cgit v0.10.2 From af40bb0b2e9d7591a3e7c4e1a1800212aa004dff Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Sat, 11 May 2013 16:24:21 -0700 Subject: iscsi-target: Fix typos in RDMAEXTENSIONS macro usage This patch fixes a handful of typos in 'RDMAEXTENTIONS' -> 'RDMAEXTENSIONS' macro usage. Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/iscsi/iscsi_target_parameters.c b/drivers/target/iscsi/iscsi_target_parameters.c index f690be9..c2185fc 100644 --- a/drivers/target/iscsi/iscsi_target_parameters.c +++ b/drivers/target/iscsi/iscsi_target_parameters.c @@ -436,7 +436,7 @@ int iscsi_create_default_params(struct iscsi_param_list **param_list_ptr) /* * Extra parameters for ISER from RFC-5046 */ - param = iscsi_set_default_param(pl, RDMAEXTENTIONS, INITIAL_RDMAEXTENTIONS, + param = iscsi_set_default_param(pl, RDMAEXTENSIONS, INITIAL_RDMAEXTENSIONS, PHASE_OPERATIONAL, SCOPE_SESSION_WIDE, SENDER_BOTH, TYPERANGE_BOOL_AND, USE_LEADING_ONLY); if (!param) @@ -529,7 +529,7 @@ int iscsi_set_keys_to_negotiate( SET_PSTATE_NEGOTIATE(param); } else if (!strcmp(param->name, OFMARKINT)) { SET_PSTATE_NEGOTIATE(param); - } else if (!strcmp(param->name, RDMAEXTENTIONS)) { + } else if (!strcmp(param->name, RDMAEXTENSIONS)) { if (iser == true) SET_PSTATE_NEGOTIATE(param); } else if (!strcmp(param->name, INITIATORRECVDATASEGMENTLENGTH)) { @@ -580,7 +580,7 @@ int iscsi_set_keys_irrelevant_for_discovery( param->state &= ~PSTATE_NEGOTIATE; else if (!strcmp(param->name, OFMARKINT)) param->state &= ~PSTATE_NEGOTIATE; - else if (!strcmp(param->name, RDMAEXTENTIONS)) + else if (!strcmp(param->name, RDMAEXTENSIONS)) param->state &= ~PSTATE_NEGOTIATE; else if (!strcmp(param->name, INITIATORRECVDATASEGMENTLENGTH)) param->state &= ~PSTATE_NEGOTIATE; @@ -1977,7 +1977,7 @@ void iscsi_set_session_parameters( ops->SessionType = !strcmp(param->value, DISCOVERY); pr_debug("SessionType: %s\n", param->value); - } else if (!strcmp(param->name, RDMAEXTENTIONS)) { + } else if (!strcmp(param->name, RDMAEXTENSIONS)) { ops->RDMAExtensions = !strcmp(param->value, YES); pr_debug("RDMAExtensions: %s\n", param->value); diff --git a/drivers/target/iscsi/iscsi_target_parameters.h b/drivers/target/iscsi/iscsi_target_parameters.h index f31b9c4..915b067 100644 --- a/drivers/target/iscsi/iscsi_target_parameters.h +++ b/drivers/target/iscsi/iscsi_target_parameters.h @@ -91,7 +91,7 @@ extern void iscsi_set_session_parameters(struct iscsi_sess_ops *, /* * Parameter names of iSCSI Extentions for RDMA (iSER). See RFC-5046 */ -#define RDMAEXTENTIONS "RDMAExtensions" +#define RDMAEXTENSIONS "RDMAExtensions" #define INITIATORRECVDATASEGMENTLENGTH "InitiatorRecvDataSegmentLength" #define TARGETRECVDATASEGMENTLENGTH "TargetRecvDataSegmentLength" @@ -142,7 +142,7 @@ extern void iscsi_set_session_parameters(struct iscsi_sess_ops *, /* * Initial values for iSER parameters following RFC-5046 Section 6 */ -#define INITIAL_RDMAEXTENTIONS NO +#define INITIAL_RDMAEXTENSIONS NO #define INITIAL_INITIATORRECVDATASEGMENTLENGTH "262144" #define INITIAL_TARGETRECVDATASEGMENTLENGTH "8192" -- cgit v0.10.2 From f77d602124d865c38705df7fa25c03de9c284ad2 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 9 May 2013 10:28:16 +0000 Subject: ipv6: do not clear pinet6 field We have seen multiple NULL dereferences in __inet6_lookup_established() After analysis, I found that inet6_sk() could be NULL while the check for sk_family == AF_INET6 was true. Bug was added in linux-2.6.29 when RCU lookups were introduced in UDP and TCP stacks. Once an IPv6 socket, using SLAB_DESTROY_BY_RCU is inserted in a hash table, we no longer can clear pinet6 field. This patch extends logic used in commit fcbdf09d9652c891 ("net: fix nulls list corruptions in sk_prot_alloc") TCP/UDP/UDPLite IPv6 protocols provide their own .clear_sk() method to make sure we do not clear pinet6 field. At socket clone phase, we do not really care, as cloning the parent (non NULL) pinet6 is not adding a fatal race. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/include/net/sock.h b/include/net/sock.h index 5c97b0f..66772cf 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -866,6 +866,18 @@ struct inet_hashinfo; struct raw_hashinfo; struct module; +/* + * caches using SLAB_DESTROY_BY_RCU should let .next pointer from nulls nodes + * un-modified. Special care is taken when initializing object to zero. + */ +static inline void sk_prot_clear_nulls(struct sock *sk, int size) +{ + if (offsetof(struct sock, sk_node.next) != 0) + memset(sk, 0, offsetof(struct sock, sk_node.next)); + memset(&sk->sk_node.pprev, 0, + size - offsetof(struct sock, sk_node.pprev)); +} + /* Networking protocol blocks we attach to sockets. * socket layer -> transport layer interface * transport -> network interface is defined by struct inet_proto diff --git a/net/core/sock.c b/net/core/sock.c index d4f4cea..6ba327d 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -1217,18 +1217,6 @@ static void sock_copy(struct sock *nsk, const struct sock *osk) #endif } -/* - * caches using SLAB_DESTROY_BY_RCU should let .next pointer from nulls nodes - * un-modified. Special care is taken when initializing object to zero. - */ -static inline void sk_prot_clear_nulls(struct sock *sk, int size) -{ - if (offsetof(struct sock, sk_node.next) != 0) - memset(sk, 0, offsetof(struct sock, sk_node.next)); - memset(&sk->sk_node.pprev, 0, - size - offsetof(struct sock, sk_node.pprev)); -} - void sk_prot_clear_portaddr_nulls(struct sock *sk, int size) { unsigned long nulls1, nulls2; diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 7116706..0a17ed9 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -1890,6 +1890,17 @@ void tcp6_proc_exit(struct net *net) } #endif +static void tcp_v6_clear_sk(struct sock *sk, int size) +{ + struct inet_sock *inet = inet_sk(sk); + + /* we do not want to clear pinet6 field, because of RCU lookups */ + sk_prot_clear_nulls(sk, offsetof(struct inet_sock, pinet6)); + + size -= offsetof(struct inet_sock, pinet6) + sizeof(inet->pinet6); + memset(&inet->pinet6 + 1, 0, size); +} + struct proto tcpv6_prot = { .name = "TCPv6", .owner = THIS_MODULE, @@ -1933,6 +1944,7 @@ struct proto tcpv6_prot = { #ifdef CONFIG_MEMCG_KMEM .proto_cgroup = tcp_proto_cgroup, #endif + .clear_sk = tcp_v6_clear_sk, }; static const struct inet6_protocol tcpv6_protocol = { diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index d4defdd..42923b1 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -1432,6 +1432,17 @@ void udp6_proc_exit(struct net *net) { } #endif /* CONFIG_PROC_FS */ +void udp_v6_clear_sk(struct sock *sk, int size) +{ + struct inet_sock *inet = inet_sk(sk); + + /* we do not want to clear pinet6 field, because of RCU lookups */ + sk_prot_clear_portaddr_nulls(sk, offsetof(struct inet_sock, pinet6)); + + size -= offsetof(struct inet_sock, pinet6) + sizeof(inet->pinet6); + memset(&inet->pinet6 + 1, 0, size); +} + /* ------------------------------------------------------------------------ */ struct proto udpv6_prot = { @@ -1462,7 +1473,7 @@ struct proto udpv6_prot = { .compat_setsockopt = compat_udpv6_setsockopt, .compat_getsockopt = compat_udpv6_getsockopt, #endif - .clear_sk = sk_prot_clear_portaddr_nulls, + .clear_sk = udp_v6_clear_sk, }; static struct inet_protosw udpv6_protosw = { diff --git a/net/ipv6/udp_impl.h b/net/ipv6/udp_impl.h index d757104..4691ed5 100644 --- a/net/ipv6/udp_impl.h +++ b/net/ipv6/udp_impl.h @@ -31,6 +31,8 @@ extern int udpv6_recvmsg(struct kiocb *iocb, struct sock *sk, extern int udpv6_queue_rcv_skb(struct sock * sk, struct sk_buff *skb); extern void udpv6_destroy_sock(struct sock *sk); +extern void udp_v6_clear_sk(struct sock *sk, int size); + #ifdef CONFIG_PROC_FS extern int udp6_seq_show(struct seq_file *seq, void *v); #endif diff --git a/net/ipv6/udplite.c b/net/ipv6/udplite.c index 1d08e21..dfcc4be 100644 --- a/net/ipv6/udplite.c +++ b/net/ipv6/udplite.c @@ -56,7 +56,7 @@ struct proto udplitev6_prot = { .compat_setsockopt = compat_udpv6_setsockopt, .compat_getsockopt = compat_udpv6_getsockopt, #endif - .clear_sk = sk_prot_clear_portaddr_nulls, + .clear_sk = udp_v6_clear_sk, }; static struct inet_protosw udplite6_protosw = { -- cgit v0.10.2 From 452cf3241a40a372ca5382bd8b51274115beb6de Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Sat, 11 May 2013 16:27:56 -0700 Subject: MAINTAINERS: Update target git tree URL Signed-off-by: Nicholas Bellinger diff --git a/MAINTAINERS b/MAINTAINERS index 50b4d73..0b5e7c5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7722,7 +7722,7 @@ L: linux-scsi@vger.kernel.org L: target-devel@vger.kernel.org L: http://groups.google.com/group/linux-iscsi-target-dev W: http://www.linux-iscsi.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/nab/lio-core.git master +T: git git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending.git master S: Supported F: drivers/target/ F: include/target/ -- cgit v0.10.2 From 3b76b3c37b89302db188b743f2f7b31aa666bb00 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 9 May 2013 11:04:45 +0000 Subject: net/ethernet: NET_CALXEDA_XGMAC should depend on HAS_DMA If NO_DMA=y: drivers/built-in.o: In function `xgmac_xmit': drivers/net/ethernet/calxeda/xgmac.c:1102: undefined reference to `dma_mapping_error' Signed-off-by: Geert Uytterhoeven Cc: Rob Herring Cc: David S. Miller Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/calxeda/Kconfig b/drivers/net/ethernet/calxeda/Kconfig index aba435c..184a063 100644 --- a/drivers/net/ethernet/calxeda/Kconfig +++ b/drivers/net/ethernet/calxeda/Kconfig @@ -1,6 +1,6 @@ config NET_CALXEDA_XGMAC tristate "Calxeda 1G/10G XGMAC Ethernet driver" - depends on HAS_IOMEM + depends on HAS_IOMEM && HAS_DMA select CRC32 help This is the driver for the XGMAC Ethernet IP block found on Calxeda -- cgit v0.10.2 From fd1eb9e660c7521884387eaf45c12e5225e4ccfb Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 9 May 2013 11:04:46 +0000 Subject: net/ethernet: STMMAC_ETH should depend on HAS_DMA If NO_DMA=y: drivers/built-in.o: In function `dma_free_tx_skbufs': drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1141: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `dma_free_rx_skbufs': drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1120: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `free_dma_desc_resources': drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1159: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `stmmac_init_rx_buffers': drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:980: undefined reference to `dma_map_single' drivers/built-in.o: In function `init_dma_desc_rings': drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1015: undefined reference to `dma_alloc_coherent' drivers/built-in.o: In function `stmmac_tx_clean': drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1250: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `stmmac_rx': drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2044: undefined reference to `dma_unmap_single' drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2082: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `stmmac_rx_refill': drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1967: undefined reference to `dma_map_single' drivers/built-in.o: In function `stmmac_xmit': drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1845: undefined reference to `dma_map_single' drivers/built-in.o: In function `skb_frag_dma_map': include/linux/skbuff.h:2184: undefined reference to `dma_map_page' drivers/built-in.o: In function `stmmac_jumbo_frm': drivers/net/ethernet/stmicro/stmmac/ring_mode.c:40: undefined reference to `dma_map_single' drivers/built-in.o: In function `stmmac_jumbo_frm': drivers/net/ethernet/stmicro/stmmac/chain_mode.c:48: undefined reference to `dma_map_single' drivers/net/ethernet/stmicro/stmmac/chain_mode.c:55: undefined reference to `dma_map_single' Signed-off-by: Geert Uytterhoeven Cc: Giuseppe Cavallaro Cc: David S. Miller Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig index f695a50..43c1f32 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig @@ -1,6 +1,6 @@ config STMMAC_ETH tristate "STMicroelectronics 10/100/1000 Ethernet driver" - depends on HAS_IOMEM + depends on HAS_IOMEM && HAS_DMA select NET_CORE select MII select PHYLIB -- cgit v0.10.2 From 4837ef42fff894f6ad2bc65431455bc5d9259431 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 9 May 2013 11:04:47 +0000 Subject: net/wireless: ATH9K should depend on HAS_DMA If NO_DMA=y: drivers/built-in.o: In function `ath9k_beacon_generate': drivers/net/wireless/ath/ath9k/beacon.c:146: undefined reference to `dma_unmap_single' drivers/net/wireless/ath/ath9k/beacon.c:174: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/beacon.c:176: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath9k_beacon_remove_slot': drivers/net/wireless/ath/ath9k/beacon.c:252: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_descdma_setup': drivers/net/wireless/ath/ath9k/init.c:382: undefined reference to `dmam_alloc_coherent' drivers/built-in.o: In function `ath_edma_get_buffers': drivers/net/wireless/ath/ath9k/recv.c:616: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_get_next_rx_buf': drivers/net/wireless/ath/ath9k/recv.c:740: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_rx_edma_cleanup': drivers/net/wireless/ath/ath9k/recv.c:176: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_rx_cleanup': drivers/net/wireless/ath/ath9k/recv.c:340: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_rx_edma_buf_link': drivers/net/wireless/ath/ath9k/recv.c:122: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_rx_tasklet': drivers/net/wireless/ath/ath9k/recv.c:1275: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/recv.c:1277: undefined reference to `dma_mapping_error' drivers/net/wireless/ath/ath9k/recv.c:1283: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_rx_edma_init': drivers/net/wireless/ath/ath9k/recv.c:226: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/recv.c:229: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath_rx_init': drivers/net/wireless/ath/ath9k/recv.c:303: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/recv.c:306: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath_tx_complete_buf': drivers/net/wireless/ath/ath9k/xmit.c:2088: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_txstatus_setup': drivers/net/wireless/ath/ath9k/xmit.c:2344: undefined reference to `dmam_alloc_coherent' drivers/built-in.o: In function `ath_tx_set_retry': drivers/net/wireless/ath/ath9k/xmit.c:307: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_tx_setup_buffer': drivers/net/wireless/ath/ath9k/xmit.c:1887: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/xmit.c:1889: undefined reference to `dma_mapping_error' Signed-off-by: Geert Uytterhoeven Cc: Luis R. Rodriguez Cc: John W. Linville Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig index 17507dc..f3dc124 100644 --- a/drivers/net/wireless/ath/ath9k/Kconfig +++ b/drivers/net/wireless/ath/ath9k/Kconfig @@ -17,7 +17,7 @@ config ATH9K_BTCOEX_SUPPORT config ATH9K tristate "Atheros 802.11n wireless cards support" - depends on MAC80211 + depends on MAC80211 && HAS_DMA select ATH9K_HW select MAC80211_LEDS select LEDS_CLASS -- cgit v0.10.2 From d914ae80b93c8ae8b1c9c55cf431426eff3982dc Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 9 May 2013 11:04:49 +0000 Subject: net/ethernet: ARM_AT91_ETHER should depend on HAS_DMA If NO_DMA=y: drivers/built-in.o: In function `at91ether_start': drivers/net/ethernet/cadence/at91_ether.c:49: undefined reference to `dma_alloc_coherent' drivers/net/ethernet/cadence/at91_ether.c:60: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `at91ether_interrupt': drivers/net/ethernet/cadence/at91_ether.c:250: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `at91ether_start_xmit': drivers/net/ethernet/cadence/at91_ether.c:169: undefined reference to `dma_map_single' drivers/built-in.o: In function `at91ether_close': drivers/net/ethernet/cadence/at91_ether.c:145: undefined reference to `dma_free_coherent' Signed-off-by: Geert Uytterhoeven Cc: Nicolas Ferre Cc: David S. Miller Cc: netdev@vger.kernel.org Acked-by: Nicolas Ferre Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig index 1194446..0d9d6e6 100644 --- a/drivers/net/ethernet/cadence/Kconfig +++ b/drivers/net/ethernet/cadence/Kconfig @@ -22,7 +22,7 @@ if NET_CADENCE config ARM_AT91_ETHER tristate "AT91RM9200 Ethernet support" - depends on GENERIC_HARDIRQS + depends on GENERIC_HARDIRQS && HAS_DMA select NET_CORE select MACB ---help--- -- cgit v0.10.2 From 822bc329695ac1612c87efe68bd8f7d5cbb47be9 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 9 May 2013 11:04:50 +0000 Subject: net/ethernet: MACB should depend on HAS_DMA If NO_DMA=y: drivers/built-in.o: In function `macb_free_consistent': drivers/net/ethernet/cadence/macb.c:878: undefined reference to `dma_free_coherent' drivers/net/ethernet/cadence/macb.c:883: undefined reference to `dma_free_coherent' drivers/net/ethernet/cadence/macb.c:888: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `macb_alloc_consistent': drivers/net/ethernet/cadence/macb.c:905: undefined reference to `dma_alloc_coherent' drivers/built-in.o: In function `macb_tx_interrupt': drivers/net/ethernet/cadence/macb.c:515: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `macb_tx_error_task': drivers/net/ethernet/cadence/macb.c:457: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `macb_start_xmit': drivers/net/ethernet/cadence/macb.c:838: undefined reference to `dma_map_single' Signed-off-by: Geert Uytterhoeven Cc: Nicolas Ferre Cc: David S. Miller Cc: netdev@vger.kernel.org Acked-by: Nicolas Ferre Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig index 0d9d6e6..768285e 100644 --- a/drivers/net/ethernet/cadence/Kconfig +++ b/drivers/net/ethernet/cadence/Kconfig @@ -31,6 +31,7 @@ config ARM_AT91_ETHER config MACB tristate "Cadence MACB/GEM support" + depends on HAS_DMA select PHYLIB ---help--- The Cadence MACB ethernet interface is found on many Atmel AT32 and -- cgit v0.10.2 From 79e0c19e85cd1617efcf441988a206ffc96b56a1 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 9 May 2013 11:04:52 +0000 Subject: caif: CAIF_VIRTIO should depend on HAS_DMA If NO_DMA=y: drivers/built-in.o: In function `cfv_destroy_genpool': drivers/net/caif/caif_virtio.c:364: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `cfv_create_genpool': drivers/net/caif/caif_virtio.c:397: undefined reference to `dma_alloc_coherent' Signed-off-by: Geert Uytterhoeven Cc: Dmitry Tarnyagin Cc: David S. Miller Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller diff --git a/drivers/net/caif/Kconfig b/drivers/net/caif/Kconfig index 7ffc756..5470980 100644 --- a/drivers/net/caif/Kconfig +++ b/drivers/net/caif/Kconfig @@ -43,7 +43,7 @@ config CAIF_HSI config CAIF_VIRTIO tristate "CAIF virtio transport driver" - depends on CAIF + depends on CAIF && HAS_DMA select VHOST_RING select VIRTIO select GENERIC_ALLOCATOR -- cgit v0.10.2 From 4b264a1676e70dc656ba53a8cac690f2d4b65f4e Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 9 May 2013 11:14:07 +0000 Subject: 3c59x: fix PCI resource management The driver wrongly claimed I/O ports at an address returned by pci_iomap() -- even if it was passed an MMIO address. Fix this by claiming/releasing all PCI resources in the PCI driver's probe()/remove() methods instead and get rid of 'must_free_region' flag weirdness (why would Cardbus claim anything for us?). Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/3com/3c59x.c b/drivers/net/ethernet/3com/3c59x.c index de570a8..072c6f1 100644 --- a/drivers/net/ethernet/3com/3c59x.c +++ b/drivers/net/ethernet/3com/3c59x.c @@ -632,7 +632,6 @@ struct vortex_private { pm_state_valid:1, /* pci_dev->saved_config_space has sane contents */ open:1, medialock:1, - must_free_region:1, /* Flag: if zero, Cardbus owns the I/O region */ large_frames:1, /* accept large frames */ handling_irq:1; /* private in_irq indicator */ /* {get|set}_wol operations are already serialized by rtnl. @@ -1012,6 +1011,12 @@ static int vortex_init_one(struct pci_dev *pdev, if (rc < 0) goto out; + rc = pci_request_regions(pdev, DRV_NAME); + if (rc < 0) { + pci_disable_device(pdev); + goto out; + } + unit = vortex_cards_found; if (global_use_mmio < 0 && (unit >= MAX_UNITS || use_mmio[unit] < 0)) { @@ -1027,6 +1032,7 @@ static int vortex_init_one(struct pci_dev *pdev, if (!ioaddr) /* If mapping fails, fall-back to BAR 0... */ ioaddr = pci_iomap(pdev, 0, 0); if (!ioaddr) { + pci_release_regions(pdev); pci_disable_device(pdev); rc = -ENOMEM; goto out; @@ -1036,6 +1042,7 @@ static int vortex_init_one(struct pci_dev *pdev, ent->driver_data, unit); if (rc < 0) { pci_iounmap(pdev, ioaddr); + pci_release_regions(pdev); pci_disable_device(pdev); goto out; } @@ -1178,11 +1185,6 @@ static int vortex_probe1(struct device *gendev, void __iomem *ioaddr, int irq, /* PCI-only startup logic */ if (pdev) { - /* EISA resources already marked, so only PCI needs to do this here */ - /* Ignore return value, because Cardbus drivers already allocate for us */ - if (request_region(dev->base_addr, vci->io_size, print_name) != NULL) - vp->must_free_region = 1; - /* enable bus-mastering if necessary */ if (vci->flags & PCI_USES_MASTER) pci_set_master(pdev); @@ -1220,7 +1222,7 @@ static int vortex_probe1(struct device *gendev, void __iomem *ioaddr, int irq, &vp->rx_ring_dma); retval = -ENOMEM; if (!vp->rx_ring) - goto free_region; + goto free_device; vp->tx_ring = (struct boom_tx_desc *)(vp->rx_ring + RX_RING_SIZE); vp->tx_ring_dma = vp->rx_ring_dma + sizeof(struct boom_rx_desc) * RX_RING_SIZE; @@ -1484,9 +1486,7 @@ free_ring: + sizeof(struct boom_tx_desc) * TX_RING_SIZE, vp->rx_ring, vp->rx_ring_dma); -free_region: - if (vp->must_free_region) - release_region(dev->base_addr, vci->io_size); +free_device: free_netdev(dev); pr_err(PFX "vortex_probe1 fails. Returns %d\n", retval); out: @@ -3254,8 +3254,9 @@ static void vortex_remove_one(struct pci_dev *pdev) + sizeof(struct boom_tx_desc) * TX_RING_SIZE, vp->rx_ring, vp->rx_ring_dma); - if (vp->must_free_region) - release_region(dev->base_addr, vp->io_size); + + pci_release_regions(pdev); + free_netdev(dev); } -- cgit v0.10.2 From 23fbb5a87c56e98a7a4cfac9d6f2ac70f135c4df Mon Sep 17 00:00:00 2001 From: Petri Gynther Date: Thu, 9 May 2013 16:50:00 +0000 Subject: emac: Fix EMAC soft reset on 460EX/GT Fix EMAC soft reset on 460EX/GT to select the right PHY clock source before and after the soft reset. EMAC with PHY should use the clock from PHY during soft reset. EMAC without PHY should use the internal clock during soft reset. PPC460EX/GT Embedded Processor Advanced User's Manual section 28.10.1 Mode Register 0 (EMACx_MR0) states: Note: The PHY must provide a TX Clk in order to perform a soft reset of the EMAC. If none is present, select the internal clock (SDR0_ETH_CFG[EMACx_PHY_CLK] = 1). After a soft reset, select the external clock. Without the fix, 460EX/GT-based boards with RGMII PHYs attached to EMACs experience EMAC interrupt storm and system watchdog reset when issuing "ifconfig eth0 down" + "ifconfig eth0 up" a few times. The system enters endless loop of serving emac_irq() with EMACx_ISR register stuck at value 0x10000000 (Rx parity error). With the fix, the above issue is no longer observed. Signed-off-by: Petri Gynther Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c index 4989481..d300a0c 100644 --- a/drivers/net/ethernet/ibm/emac/core.c +++ b/drivers/net/ethernet/ibm/emac/core.c @@ -359,10 +359,26 @@ static int emac_reset(struct emac_instance *dev) } #ifdef CONFIG_PPC_DCR_NATIVE - /* Enable internal clock source */ - if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) - dcri_clrset(SDR0, SDR0_ETH_CFG, - 0, SDR0_ETH_CFG_ECS << dev->cell_index); + /* + * PPC460EX/GT Embedded Processor Advanced User's Manual + * section 28.10.1 Mode Register 0 (EMACx_MR0) states: + * Note: The PHY must provide a TX Clk in order to perform a soft reset + * of the EMAC. If none is present, select the internal clock + * (SDR0_ETH_CFG[EMACx_PHY_CLK] = 1). + * After a soft reset, select the external clock. + */ + if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) { + if (dev->phy_address == 0xffffffff && + dev->phy_map == 0xffffffff) { + /* No PHY: select internal loop clock before reset */ + dcri_clrset(SDR0, SDR0_ETH_CFG, + 0, SDR0_ETH_CFG_ECS << dev->cell_index); + } else { + /* PHY present: select external clock before reset */ + dcri_clrset(SDR0, SDR0_ETH_CFG, + SDR0_ETH_CFG_ECS << dev->cell_index, 0); + } + } #endif out_be32(&p->mr0, EMAC_MR0_SRST); @@ -370,10 +386,14 @@ static int emac_reset(struct emac_instance *dev) --n; #ifdef CONFIG_PPC_DCR_NATIVE - /* Enable external clock source */ - if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) - dcri_clrset(SDR0, SDR0_ETH_CFG, - SDR0_ETH_CFG_ECS << dev->cell_index, 0); + if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) { + if (dev->phy_address == 0xffffffff && + dev->phy_map == 0xffffffff) { + /* No PHY: restore external clock source after reset */ + dcri_clrset(SDR0, SDR0_ETH_CFG, + SDR0_ETH_CFG_ECS << dev->cell_index, 0); + } + } #endif if (n) { -- cgit v0.10.2 From d34710e3e30fee26f4b0617b5458aa1c48236bb0 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Thu, 9 May 2013 19:50:51 +0000 Subject: virtio_net: use default napi weight by default Since commit 82dc3c63c692b1e1d5937 ("net: introduce NAPI_POLL_WEIGHT") we warn drivers when they use napi weight higher than NAPI_POLL_WEIGHT, but virtio_net still uses 128 by default. This patch makes its default value to NAPI_POLL_WEIGHT. Cc: "Michael S. Tsirkin" Cc: Eric Dumazet Cc: David S. Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 3c23fdc..655bb25 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -28,7 +28,7 @@ #include #include -static int napi_weight = 128; +static int napi_weight = NAPI_POLL_WEIGHT; module_param(napi_weight, int, 0444); static bool csum = true, gso = true; -- cgit v0.10.2 From 5dbd5068430b8bd1c19387d46d6c1a88b261257f Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Thu, 9 May 2013 21:56:37 +0000 Subject: ipv6,gre: do not leak info to user-space There is a hole in struct ip6_tnl_parm2, so we have to zero the struct on stack before copying it to user-space. Cc: David S. Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c index d3ddd84..ecd6073 100644 --- a/net/ipv6/ip6_gre.c +++ b/net/ipv6/ip6_gre.c @@ -1081,6 +1081,7 @@ static int ip6gre_tunnel_ioctl(struct net_device *dev, } if (t == NULL) t = netdev_priv(dev); + memset(&p, 0, sizeof(p)); ip6gre_tnl_parm_to_user(&p, &t->parms); if (copy_to_user(ifr->ifr_ifru.ifru_data, &p, sizeof(p))) err = -EFAULT; @@ -1128,6 +1129,7 @@ static int ip6gre_tunnel_ioctl(struct net_device *dev, if (t) { err = 0; + memset(&p, 0, sizeof(p)); ip6gre_tnl_parm_to_user(&p, &t->parms); if (copy_to_user(ifr->ifr_ifru.ifru_data, &p, sizeof(p))) err = -EFAULT; -- cgit v0.10.2 From 84c4a9dfbf430861e7588d95ae3ff61535dca351 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Thu, 9 May 2013 22:40:00 +0000 Subject: xfrm6: release dev before returning error We forget to call dev_put() on error path in xfrm6_fill_dst(), its caller doesn't handle this. Cc: Herbert Xu Cc: Steffen Klassert Cc: David S. Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c index 4ef7bdb..23ed03d 100644 --- a/net/ipv6/xfrm6_policy.c +++ b/net/ipv6/xfrm6_policy.c @@ -103,8 +103,10 @@ static int xfrm6_fill_dst(struct xfrm_dst *xdst, struct net_device *dev, dev_hold(dev); xdst->u.rt6.rt6i_idev = in6_dev_get(dev); - if (!xdst->u.rt6.rt6i_idev) + if (!xdst->u.rt6.rt6i_idev) { + dev_put(dev); return -ENODEV; + } rt6_transfer_peer(&xdst->u.rt6, rt); -- cgit v0.10.2 From 4510d198f994bf49f88aa05d55e7a3584cd430a8 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 23 Apr 2013 17:06:43 +0000 Subject: hwmon: (iio_hwmon) Fix missing iio_channel_release_all call if devm_kzalloc fail Signed-off-by: Axel Lin Acked-by: Jonathan Cameron Signed-off-by: Guenter Roeck diff --git a/drivers/hwmon/iio_hwmon.c b/drivers/hwmon/iio_hwmon.c index aafa453..368497f 100644 --- a/drivers/hwmon/iio_hwmon.c +++ b/drivers/hwmon/iio_hwmon.c @@ -84,8 +84,10 @@ static int iio_hwmon_probe(struct platform_device *pdev) return PTR_ERR(channels); st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL); - if (st == NULL) - return -ENOMEM; + if (st == NULL) { + ret = -ENOMEM; + goto error_release_channels; + } st->channels = channels; -- cgit v0.10.2 From 169c05cd54473ba4cc37bf4d22e7631395d14f68 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 9 May 2013 10:40:01 -0700 Subject: hwmon: (nct6775) Do not create non-existing attributes Overtemperature and hysteresis registers only exist for primary temperature registers, not for alternates, so do not assign those registers when initializing alternates. Signed-off-by: Guenter Roeck diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c index f43f5e5..04638ae 100644 --- a/drivers/hwmon/nct6775.c +++ b/drivers/hwmon/nct6775.c @@ -3705,8 +3705,10 @@ static int nct6775_probe(struct platform_device *pdev) data->have_temp |= 1 << i; data->have_temp_fixed |= 1 << i; data->reg_temp[0][i] = reg_temp_alternate[i]; - data->reg_temp[1][i] = reg_temp_over[i]; - data->reg_temp[2][i] = reg_temp_hyst[i]; + if (i < num_reg_temp) { + data->reg_temp[1][i] = reg_temp_over[i]; + data->reg_temp[2][i] = reg_temp_hyst[i]; + } data->temp_src[i] = i + 1; continue; } -- cgit v0.10.2 From 4b0c0f294f60abcdd20994a8341a95c8ac5eeb96 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 3 May 2013 15:02:50 +0200 Subject: tick: Cleanup NOHZ per cpu data on cpu down Prarit reported a crash on CPU offline/online. The reason is that on CPU down the NOHZ related per cpu data of the dead cpu is not cleaned up. If at cpu online an interrupt happens before the per cpu tick device is registered the irq_enter() check potentially sees stale data and dereferences a NULL pointer. Cleanup the data after the cpu is dead. Reported-by: Prarit Bhargava Cc: stable@vger.kernel.org Cc: Mike Galbraith Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1305031451561.2886@ionos Signed-off-by: Thomas Gleixner diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 225f8bf..0eed1db 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -904,7 +904,7 @@ void tick_cancel_sched_timer(int cpu) hrtimer_cancel(&ts->sched_timer); # endif - ts->nohz_mode = NOHZ_MODE_INACTIVE; + memset(ts, 0, sizeof(*ts)); } #endif -- cgit v0.10.2 From 0a3b15ac3cc3ddc791901e12bdc930b5fa11a30a Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 2 May 2013 21:54:37 +0200 Subject: ACPI / PM: Move processor suspend/resume to syscore_ops The system suspend routine of the ACPI processor driver saves the BUS_MASTER_RLD register and its resume routine restores it. However, there can be only one such register in the system and it really should be saved after non-boot CPUs have been offlined and restored before they are put back online during resume. For this reason, move the saving and restoration of BUS_MASTER_RLD to syscore suspend and syscore resume, respectively, and drop the no longer necessary suspend/resume callbacks from the ACPI processor driver. Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index bec717f..c266cdc 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -95,9 +95,6 @@ static const struct acpi_device_id processor_device_ids[] = { }; MODULE_DEVICE_TABLE(acpi, processor_device_ids); -static SIMPLE_DEV_PM_OPS(acpi_processor_pm, - acpi_processor_suspend, acpi_processor_resume); - static struct acpi_driver acpi_processor_driver = { .name = "processor", .class = ACPI_PROCESSOR_CLASS, @@ -107,7 +104,6 @@ static struct acpi_driver acpi_processor_driver = { .remove = acpi_processor_remove, .notify = acpi_processor_notify, }, - .drv.pm = &acpi_processor_pm, }; #define INSTALL_NOTIFY_HANDLER 1 @@ -934,6 +930,8 @@ static int __init acpi_processor_init(void) if (result < 0) return result; + acpi_processor_syscore_init(); + acpi_processor_install_hotplug_notify(); acpi_thermal_cpufreq_init(); @@ -956,6 +954,8 @@ static void __exit acpi_processor_exit(void) acpi_processor_uninstall_hotplug_notify(); + acpi_processor_syscore_exit(); + acpi_bus_unregister_driver(&acpi_processor_driver); return; diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index f0df2c9..eb133c7 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -34,6 +34,7 @@ #include /* need_resched() */ #include #include +#include /* * Include the apic definitions for x86 to have the APIC timer related defines @@ -210,33 +211,41 @@ static void lapic_timer_state_broadcast(struct acpi_processor *pr, #endif +#ifdef CONFIG_PM_SLEEP static u32 saved_bm_rld; -static void acpi_idle_bm_rld_save(void) +int acpi_processor_suspend(void) { acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld); + return 0; } -static void acpi_idle_bm_rld_restore(void) + +void acpi_processor_resume(void) { u32 resumed_bm_rld; acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &resumed_bm_rld); + if (resumed_bm_rld == saved_bm_rld) + return; - if (resumed_bm_rld != saved_bm_rld) - acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld); + acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld); } -int acpi_processor_suspend(struct device *dev) +static struct syscore_ops acpi_processor_syscore_ops = { + .suspend = acpi_processor_suspend, + .resume = acpi_processor_resume, +}; + +void acpi_processor_syscore_init(void) { - acpi_idle_bm_rld_save(); - return 0; + register_syscore_ops(&acpi_processor_syscore_ops); } -int acpi_processor_resume(struct device *dev) +void acpi_processor_syscore_exit(void) { - acpi_idle_bm_rld_restore(); - return 0; + unregister_syscore_ops(&acpi_processor_syscore_ops); } +#endif /* CONFIG_PM_SLEEP */ #if defined(CONFIG_X86) static void tsc_check_state(int state) diff --git a/include/acpi/processor.h b/include/acpi/processor.h index b327b5a..ea69367 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -329,10 +329,16 @@ int acpi_processor_power_init(struct acpi_processor *pr); int acpi_processor_power_exit(struct acpi_processor *pr); int acpi_processor_cst_has_changed(struct acpi_processor *pr); int acpi_processor_hotplug(struct acpi_processor *pr); -int acpi_processor_suspend(struct device *dev); -int acpi_processor_resume(struct device *dev); extern struct cpuidle_driver acpi_idle_driver; +#ifdef CONFIG_PM_SLEEP +void acpi_processor_syscore_init(void); +void acpi_processor_syscore_exit(void); +#else +static inline void acpi_processor_syscore_init(void) {} +static inline void acpi_processor_syscore_exit(void) {} +#endif + /* in processor_thermal.c */ int acpi_processor_get_limit_info(struct acpi_processor *pr); extern const struct thermal_cooling_device_ops processor_cooling_ops; -- cgit v0.10.2 From 36200af867e2cf5adc1ff77214b2524f6111736f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jan-Simon=20M=C3=B6ller?= Date: Tue, 30 Apr 2013 09:39:04 +0000 Subject: ACPI: Fix section to __init. Align with usage in acpixf.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes warning during compilation with clang. [rjw: Subject and changelog] Signed-off-by: Jan-Simon Möller Signed-off-by: Rafael J. Wysocki diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h index 5b3d2bd..64b8c76 100644 --- a/include/acpi/acpiosxf.h +++ b/include/acpi/acpiosxf.h @@ -77,7 +77,7 @@ struct acpi_signal_fatal_info { /* * OSL Initialization and shutdown primitives */ -acpi_status __initdata acpi_os_initialize(void); +acpi_status __init acpi_os_initialize(void); acpi_status acpi_os_terminate(void); -- cgit v0.10.2 From 4ef366c583d6180b1c951147869ee5a3038834f2 Mon Sep 17 00:00:00 2001 From: Alex Hung Date: Mon, 6 May 2013 08:23:43 +0000 Subject: ACPI video: ignore BIOS initial backlight value for HP 1000 On HP 1000 lapops, BIOS reports minimum backlight on boot and causes backlight to dim completely. This ignores the initial backlight values and set to max brightness. References:: https://bugs.launchpad.net/bugs/1167760 Signed-off-by: Alex Hung Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index c3932d0..5b32e15 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -456,6 +456,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dm4 Notebook PC"), }, }, + { + .callback = video_ignore_initial_backlight, + .ident = "HP 1000 Notebook PC", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP 1000 Notebook PC"), + }, + }, {} }; -- cgit v0.10.2 From 28fe5c825f8e15744d04c7c1b8df197950923ecd Mon Sep 17 00:00:00 2001 From: Lan Tianyu Date: Mon, 6 May 2013 03:23:40 +0000 Subject: ACPI / EC: Restart transaction even when the IBF flag set The EC driver works abnormally with IBF flag always set. IBF means "The host has written a byte of data to the command or data port, but the embedded controller has not yet read it". If IBF is set in the EC status and not cleared, this will cause all subsequent EC requests to fail with a timeout error. Change the EC driver so that it doesn't refuse to restart a transaction if IBF is set in the status. Also increase the number of transaction restarts to 5, as it turns out that 2 is not sufficient in some cases. This bug happens on several different machines (Asus V1S, Dell Latitude E6530, Samsung R719, Acer Aspire 5930G, Sony Vaio SR19VN and others). [rjw: Changelog] References: https://bugzilla.kernel.org/show_bug.cgi?id=14733 References: https://bugzilla.kernel.org/show_bug.cgi?id=15560 References: https://bugzilla.kernel.org/show_bug.cgi?id=15946 References: https://bugzilla.kernel.org/show_bug.cgi?id=42945 References: https://bugzilla.kernel.org/show_bug.cgi?id=48221 Signed-off-by: Lan Tianyu Cc: All Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index d45b287..edc0081 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -223,7 +223,7 @@ static int ec_check_sci_sync(struct acpi_ec *ec, u8 state) static int ec_poll(struct acpi_ec *ec) { unsigned long flags; - int repeat = 2; /* number of command restarts */ + int repeat = 5; /* number of command restarts */ while (repeat--) { unsigned long delay = jiffies + msecs_to_jiffies(ec_delay); @@ -241,8 +241,6 @@ static int ec_poll(struct acpi_ec *ec) } advance_transaction(ec, acpi_ec_read_status(ec)); } while (time_before(jiffies, delay)); - if (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) - break; pr_debug(PREFIX "controller reset, restart transaction\n"); spin_lock_irqsave(&ec->lock, flags); start_transaction(ec); -- cgit v0.10.2 From 0ab5bb64937d76c660c29813d8de0f4b47bf7550 Mon Sep 17 00:00:00 2001 From: Lan Tianyu Date: Wed, 8 May 2013 07:28:46 +0000 Subject: ACPI / AC: Add sleep quirk for Thinkpad e530 The Thinkpad e530's BIOS notifies the AC device first and then sleeps for certain amount of time before doing real work in the EC event handler (_Qxx): Method (_Q27, 0, NotSerialized) { Notify (AC, 0x80) Sleep (0x03E8) Store (Zero, PWRS) PNOT () } This causes the AC driver to report an outdated AC state to user space, because it reads the state information from the device while the EC handler is sleeping. Introduce a quirk to cause the AC driver to wait in acpi_ac_notify() before calling acpi_ac_get_state() on systems known to have this problem and add Thinkpad e530 to the list of quirky machines (with a 1s delay which has been verified to be sufficient for that machine). [rjw: Changelog] References: https://bugzilla.kernel.org/show_bug.cgi?id=45221 Signed-off-by: Lan Tianyu Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index 00d2efd..4f4e741 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -28,6 +28,8 @@ #include #include #include +#include +#include #ifdef CONFIG_ACPI_PROCFS_POWER #include #include @@ -74,6 +76,8 @@ static int acpi_ac_resume(struct device *dev); #endif static SIMPLE_DEV_PM_OPS(acpi_ac_pm, NULL, acpi_ac_resume); +static int ac_sleep_before_get_state_ms; + static struct acpi_driver acpi_ac_driver = { .name = "ac", .class = ACPI_AC_CLASS, @@ -252,6 +256,16 @@ static void acpi_ac_notify(struct acpi_device *device, u32 event) case ACPI_AC_NOTIFY_STATUS: case ACPI_NOTIFY_BUS_CHECK: case ACPI_NOTIFY_DEVICE_CHECK: + /* + * A buggy BIOS may notify AC first and then sleep for + * a specific time before doing actual operations in the + * EC event handler (_Qxx). This will cause the AC state + * reported by the ACPI event to be incorrect, so wait for a + * specific time for the EC event handler to make progress. + */ + if (ac_sleep_before_get_state_ms > 0) + msleep(ac_sleep_before_get_state_ms); + acpi_ac_get_state(ac); acpi_bus_generate_proc_event(device, event, (u32) ac->state); acpi_bus_generate_netlink_event(device->pnp.device_class, @@ -264,6 +278,24 @@ static void acpi_ac_notify(struct acpi_device *device, u32 event) return; } +static int thinkpad_e530_quirk(const struct dmi_system_id *d) +{ + ac_sleep_before_get_state_ms = 1000; + return 0; +} + +static struct dmi_system_id ac_dmi_table[] = { + { + .callback = thinkpad_e530_quirk, + .ident = "thinkpad e530", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "32597CG"), + }, + }, + {}, +}; + static int acpi_ac_add(struct acpi_device *device) { int result = 0; @@ -312,6 +344,7 @@ static int acpi_ac_add(struct acpi_device *device) kfree(ac); } + dmi_check_system(ac_dmi_table); return result; } -- cgit v0.10.2 From bb08be78721bed02b147448d2cb404babc369cfe Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 29 Apr 2013 13:24:44 +0000 Subject: cpufreq: ARM big LITTLE: Select PM_OPP The ARM big LITTLE cpufreq driver uses the OPP layer for its functionality. Select it in Kconfig. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index f3af18b..a78ce44 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -5,6 +5,7 @@ config ARM_BIG_LITTLE_CPUFREQ tristate depends on ARM_CPU_TOPOLOGY + select PM_OPP config ARM_DT_BL_CPUFREQ tristate "Generic ARM big LITTLE CPUfreq driver probed via DT" -- cgit v0.10.2 From 996905f3334506296c8a4bec63695bcf7a9df159 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 29 Apr 2013 13:24:45 +0000 Subject: cpufreq: ARM big LITTLE DT: Return correct transition latency By mistake we are returning zero for successful call to dt_get_transition_latency(), whereas we should return transition_latency. Fix that. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/arm_big_little_dt.c b/drivers/cpufreq/arm_big_little_dt.c index 44be311..d5ae4d2 100644 --- a/drivers/cpufreq/arm_big_little_dt.c +++ b/drivers/cpufreq/arm_big_little_dt.c @@ -78,7 +78,7 @@ static int dt_get_transition_latency(struct device *cpu_dev) of_node_put(np); of_node_put(parent); - return 0; + return transition_latency; } return -ENODEV; -- cgit v0.10.2 From 3c792e0fe17858105b72516f709c48fc8e4a7523 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 29 Apr 2013 13:24:46 +0000 Subject: cpufreq: ARM big LITTLE DT: Return CPUFREQ_ETERNAL if clock-latency isn't found If "/cpus" node isn't present or "clock-latency" isn't defined we are returning error currently. Let's return CPUFREQ_ETERNAL instead, so that we don't fail. Flag appropriate messages to user in such cases. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/arm_big_little_dt.c b/drivers/cpufreq/arm_big_little_dt.c index d5ae4d2..173ed05 100644 --- a/drivers/cpufreq/arm_big_little_dt.c +++ b/drivers/cpufreq/arm_big_little_dt.c @@ -66,8 +66,8 @@ static int dt_get_transition_latency(struct device *cpu_dev) parent = of_find_node_by_path("/cpus"); if (!parent) { - pr_err("failed to find OF /cpus\n"); - return -ENOENT; + pr_info("Failed to find OF /cpus. Use CPUFREQ_ETERNAL transition latency\n"); + return CPUFREQ_ETERNAL; } for_each_child_of_node(parent, np) { @@ -81,7 +81,8 @@ static int dt_get_transition_latency(struct device *cpu_dev) return transition_latency; } - return -ENODEV; + pr_info("clock-latency isn't found, use CPUFREQ_ETERNAL transition latency\n"); + return CPUFREQ_ETERNAL; } static struct cpufreq_arm_bL_ops dt_bL_ops = { -- cgit v0.10.2 From 4521adf85cd18e4652b9285846835f74418bd88f Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 29 Apr 2013 13:24:47 +0000 Subject: cpufreq: ARM big LITTLE: Move cpu_to_cluster() to arm_big_little.h The cpu_to_cluster() function may be used by glue drivers, so it's better to keep it in arm_big_little.h. [rjw: Changelog] Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c index dbdf677..fd7beed 100644 --- a/drivers/cpufreq/arm_big_little.c +++ b/drivers/cpufreq/arm_big_little.c @@ -40,11 +40,6 @@ static struct clk *clk[MAX_CLUSTERS]; static struct cpufreq_frequency_table *freq_table[MAX_CLUSTERS]; static atomic_t cluster_usage[MAX_CLUSTERS] = {ATOMIC_INIT(0), ATOMIC_INIT(0)}; -static int cpu_to_cluster(int cpu) -{ - return topology_physical_package_id(cpu); -} - static unsigned int bL_cpufreq_get(unsigned int cpu) { u32 cur_cluster = cpu_to_cluster(cpu); diff --git a/drivers/cpufreq/arm_big_little.h b/drivers/cpufreq/arm_big_little.h index 70f18fc..79b2ce1 100644 --- a/drivers/cpufreq/arm_big_little.h +++ b/drivers/cpufreq/arm_big_little.h @@ -34,6 +34,11 @@ struct cpufreq_arm_bL_ops { int (*init_opp_table)(struct device *cpu_dev); }; +static inline int cpu_to_cluster(int cpu) +{ + return topology_physical_package_id(cpu); +} + int bL_cpufreq_register(struct cpufreq_arm_bL_ops *ops); void bL_cpufreq_unregister(struct cpufreq_arm_bL_ops *ops); -- cgit v0.10.2 From 2b80f3138e8470194745a6b954b4905060ab4067 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 29 Apr 2013 13:24:48 +0000 Subject: cpufreq: ARM big LITTLE: Improve print message The message printed at the end of driver->init() doesn't include the "cpufreq" string at all and so is difficult to find in dmesg. Add function name to that message to clearly state where the message is coming from. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c index fd7beed..5d7f53f 100644 --- a/drivers/cpufreq/arm_big_little.c +++ b/drivers/cpufreq/arm_big_little.c @@ -187,7 +187,7 @@ static int bL_cpufreq_init(struct cpufreq_policy *policy) cpumask_copy(policy->cpus, topology_core_cpumask(policy->cpu)); - dev_info(cpu_dev, "CPU %d initialized\n", policy->cpu); + dev_info(cpu_dev, "%s: CPU %d initialized\n", __func__, policy->cpu); return 0; } -- cgit v0.10.2 From a97c98adddbe98e824b69e6d7b320c8dc91fe581 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Tue, 30 Apr 2013 14:32:17 +0000 Subject: cpufreq: governors: Fix CPUFREQ_GOV_POLICY_{INIT|EXIT} notifiers There are two types of INIT/EXIT activities that we need to do for governors: - Done only once per governor (doesn't depend how many instances of the governor there are). eg: cpufreq_register_notifier() for conservative governor. - Done per governor instance, eg: sysfs_{create|remove}_group(). There were some corner cases where current code isn't able to handle them separately and so failing for some test cases. We use two separate variables now for keeping track of above two requirements. - governor->initialized for first one - dbs_data->usage_count for per governor instance Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c index 443442d..5af40ad 100644 --- a/drivers/cpufreq/cpufreq_governor.c +++ b/drivers/cpufreq/cpufreq_governor.c @@ -255,6 +255,7 @@ int cpufreq_governor_dbs(struct cpufreq_policy *policy, if (have_governor_per_policy()) { WARN_ON(dbs_data); } else if (dbs_data) { + dbs_data->usage_count++; policy->governor_data = dbs_data; return 0; } @@ -266,6 +267,7 @@ int cpufreq_governor_dbs(struct cpufreq_policy *policy, } dbs_data->cdata = cdata; + dbs_data->usage_count = 1; rc = cdata->init(dbs_data); if (rc) { pr_err("%s: POLICY_INIT: init() failed\n", __func__); @@ -294,7 +296,8 @@ int cpufreq_governor_dbs(struct cpufreq_policy *policy, set_sampling_rate(dbs_data, max(dbs_data->min_sampling_rate, latency * LATENCY_MULTIPLIER)); - if (dbs_data->cdata->governor == GOV_CONSERVATIVE) { + if ((cdata->governor == GOV_CONSERVATIVE) && + (!policy->governor->initialized)) { struct cs_ops *cs_ops = dbs_data->cdata->gov_ops; cpufreq_register_notifier(cs_ops->notifier_block, @@ -306,12 +309,12 @@ int cpufreq_governor_dbs(struct cpufreq_policy *policy, return 0; case CPUFREQ_GOV_POLICY_EXIT: - if ((policy->governor->initialized == 1) || - have_governor_per_policy()) { + if (!--dbs_data->usage_count) { sysfs_remove_group(get_governor_parent_kobj(policy), get_sysfs_attr(dbs_data)); - if (dbs_data->cdata->governor == GOV_CONSERVATIVE) { + if ((dbs_data->cdata->governor == GOV_CONSERVATIVE) && + (policy->governor->initialized == 1)) { struct cs_ops *cs_ops = dbs_data->cdata->gov_ops; cpufreq_unregister_notifier(cs_ops->notifier_block, diff --git a/drivers/cpufreq/cpufreq_governor.h b/drivers/cpufreq/cpufreq_governor.h index 8ac3353..e16a961 100644 --- a/drivers/cpufreq/cpufreq_governor.h +++ b/drivers/cpufreq/cpufreq_governor.h @@ -211,6 +211,7 @@ struct common_dbs_data { struct dbs_data { struct common_dbs_data *cdata; unsigned int min_sampling_rate; + int usage_count; void *tuners; /* dbs_mutex protects dbs_enable in governor start/stop */ -- cgit v0.10.2 From d96038e0fa00f42a5d6711884bef0a725cdc70bb Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Tue, 30 Apr 2013 14:32:18 +0000 Subject: cpufreq: Issue CPUFREQ_GOV_POLICY_EXIT notifier before dropping policy refcount We must call __cpufreq_governor(data, CPUFREQ_GOV_POLICY_EXIT) before calling cpufreq_cpu_put(data), so that policy kobject have valid fields. Otherwise, removing last online cpu of policy->cpus causes this crash for ondemand/conservative governor. [] (sysfs_find_dirent+0xe/0xa8) from [] (sysfs_get_dirent+0x21/0x58) [] (sysfs_get_dirent+0x21/0x58) from [] (sysfs_remove_group+0x85/0xbc) [] (sysfs_remove_group+0x85/0xbc) from [] (cpufreq_governor_dbs+0x369/0x4a0) [] (cpufreq_governor_dbs+0x369/0x4a0) from [] (__cpufreq_governor+0x2b/0x8c) [] (__cpufreq_governor+0x2b/0x8c) from [] (__cpufreq_remove_dev.isra.12+0x15b/0x250) [] (__cpufreq_remove_dev.isra.12+0x15b/0x250) from [] (cpufreq_cpu_callback+0x2f/0x3c) [] (cpufreq_cpu_callback+0x2f/0x3c) from [] (notifier_call_chain+0x45/0x54) [] (notifier_call_chain+0x45/0x54) from [] (__cpu_notify+0x1d/0x34) [] (__cpu_notify+0x1d/0x34) from [] (_cpu_down+0x63/0x1ac) [] (_cpu_down+0x63/0x1ac) from [] (cpu_down+0x1b/0x30) [] (cpu_down+0x1b/0x30) from [] (store_online+0x27/0x54) [] (store_online+0x27/0x54) from [] (dev_attr_store+0x11/0x18) [] (dev_attr_store+0x11/0x18) from [] (sysfs_write_file+0xed/0x114) [] (sysfs_write_file+0xed/0x114) from [] (vfs_write+0x65/0xd8) [] (vfs_write+0x65/0xd8) from [] (sys_write+0x2f/0x50) [] (sys_write+0x2f/0x50) from [] (ret_fast_syscall+0x1/0x52) Of course this only impacted drivers which have have_governor_per_policy set to true. i.e. big LITTLE cpufreq driver. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 1b8a48e..b7acfd1 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -1075,14 +1075,14 @@ static int __cpufreq_remove_dev(struct device *dev, struct subsys_interface *sif __func__, cpu_dev->id, cpu); } + if ((cpus == 1) && (cpufreq_driver->target)) + __cpufreq_governor(data, CPUFREQ_GOV_POLICY_EXIT); + pr_debug("%s: removing link, cpu: %d\n", __func__, cpu); cpufreq_cpu_put(data); /* If cpu is last user of policy, free policy */ if (cpus == 1) { - if (cpufreq_driver->target) - __cpufreq_governor(data, CPUFREQ_GOV_POLICY_EXIT); - lock_policy_rwsem_read(cpu); kobj = &data->kobj; cmp = &data->kobj_unregister; -- cgit v0.10.2 From fc31d6f55908759530462998d0464a9f124b1c32 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Wed, 1 May 2013 13:38:12 +0000 Subject: cpufreq: cpufreq-cpu0: defer probe when regulator is not ready With commit 1e4b545, regulator_get will now return -EPROBE_DEFER when the cpu0-supply node is present, but the regulator is not yet registered. It is possible for this to occur when the regulator registration by itself might be defered due to some dependent interface not yet instantiated. For example: an regulator which uses I2C and GPIO might need both systems available before proceeding, in this case, the regulator might defer it's registration. However, the cpufreq-cpu0 driver assumes that any un-successful return result is equivalent of failure. When the regulator_get returns failure other than -EPROBE_DEFER, it makes sense to assume that supply node is not present and proceed with the assumption that only clock control is necessary in the platform. With this change, we can now handle the following conditions: a) cpu0-supply binding is not present, regulator_get will return appropriate error result, resulting in cpufreq-cpu0 driver controlling just the clock. b) cpu0-supply binding is present, regulator_get returns -EPROBE_DEFER, we retry resulting in cpufreq-cpu0 driver registering later once the regulator is available. c) cpu0-supply binding is present, regulator_get returns -EPROBE_DEFER, however, regulator never registers, we retry until cpufreq-cpu0 driver fails to register pointing at device tree information bug. However, in this case, the fact that cpufreq-cpu0 operates with clock only when the DT binding clearly indicates need of a supply is a bug of it's own. d) cpu0-supply gets an regulator at probe - cpufreq-cpu0 driver controls both the clock and regulator Signed-off-by: Nishanth Menon Acked-by: Shawn Guo Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c index 3ab8294..ecd8af9 100644 --- a/drivers/cpufreq/cpufreq-cpu0.c +++ b/drivers/cpufreq/cpufreq-cpu0.c @@ -195,6 +195,22 @@ static int cpu0_cpufreq_probe(struct platform_device *pdev) cpu_dev = &pdev->dev; cpu_dev->of_node = np; + cpu_reg = devm_regulator_get(cpu_dev, "cpu0"); + if (IS_ERR(cpu_reg)) { + /* + * If cpu0 regulator supply node is present, but regulator is + * not yet registered, we should try defering probe. + */ + if (PTR_ERR(cpu_reg) == -EPROBE_DEFER) { + dev_err(cpu_dev, "cpu0 regulator not ready, retry\n"); + ret = -EPROBE_DEFER; + goto out_put_node; + } + pr_warn("failed to get cpu0 regulator: %ld\n", + PTR_ERR(cpu_reg)); + cpu_reg = NULL; + } + cpu_clk = devm_clk_get(cpu_dev, NULL); if (IS_ERR(cpu_clk)) { ret = PTR_ERR(cpu_clk); @@ -202,12 +218,6 @@ static int cpu0_cpufreq_probe(struct platform_device *pdev) goto out_put_node; } - cpu_reg = devm_regulator_get(cpu_dev, "cpu0"); - if (IS_ERR(cpu_reg)) { - pr_warn("failed to get cpu0 regulator\n"); - cpu_reg = NULL; - } - ret = of_init_opp_table(cpu_dev); if (ret) { pr_err("failed to init OPP table: %d\n", ret); -- cgit v0.10.2 From 5aaa9cc7ab589893efe8e66bf02f7fc2175a1f5b Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 3 May 2013 04:44:25 +0000 Subject: cpufreq: cpufreq-cpu0: Free parent node for error cases We are freeing parent node in success cases but not in failure cases. Let's do it. Signed-off-by: Viresh Kumar Acked-by: Shawn Guo Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c index ecd8af9..a64eb8b 100644 --- a/drivers/cpufreq/cpufreq-cpu0.c +++ b/drivers/cpufreq/cpufreq-cpu0.c @@ -189,7 +189,8 @@ static int cpu0_cpufreq_probe(struct platform_device *pdev) if (!np) { pr_err("failed to find cpu0 node\n"); - return -ENOENT; + ret = -ENOENT; + goto out_put_parent; } cpu_dev = &pdev->dev; @@ -274,6 +275,8 @@ out_free_table: opp_free_cpufreq_table(cpu_dev, &freq_table); out_put_node: of_node_put(np); +out_put_parent: + of_node_put(parent); return ret; } -- cgit v0.10.2 From 99af771115f7b2f86548ca2f762adb9032096702 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Sat, 4 May 2013 12:03:54 +0530 Subject: cpufreq: ARM big LITTLE: Fix Kconfig entries This fixes usage of "depends on" and "select" options in Kconfig for ARM big LITTLE cpufreq driver. Otherwise we get these warnings: warning: (ARM_DT_BL_CPUFREQ) selects ARM_BIG_LITTLE_CPUFREQ which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && ARM && ARM_CPU_TOPOLOGY) Signed-off-by: Arnd Bergmann Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index a78ce44..6e57543 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -3,17 +3,17 @@ # config ARM_BIG_LITTLE_CPUFREQ - tristate - depends on ARM_CPU_TOPOLOGY - select PM_OPP + tristate "Generic ARM big LITTLE CPUfreq driver" + depends on ARM_CPU_TOPOLOGY && PM_OPP && HAVE_CLK + help + This enables the Generic CPUfreq driver for ARM big.LITTLE platforms. config ARM_DT_BL_CPUFREQ - tristate "Generic ARM big LITTLE CPUfreq driver probed via DT" - select ARM_BIG_LITTLE_CPUFREQ - depends on OF && HAVE_CLK + tristate "Generic probing via DT for ARM big LITTLE CPUfreq driver" + depends on ARM_BIG_LITTLE_CPUFREQ && OF help - This enables the Generic CPUfreq driver for ARM big.LITTLE platform. - This gets frequency tables from DT. + This enables probing via DT for Generic CPUfreq driver for ARM + big.LITTLE platform. This gets frequency tables from DT. config ARM_EXYNOS_CPUFREQ bool "SAMSUNG EXYNOS SoCs" -- cgit v0.10.2 From 559f56c70fc90bd9da8c9c9c36d86c5e582ac5b3 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sun, 5 May 2013 12:18:08 +0000 Subject: cpufreq: Fix incorrect dependecies for ARM SA11xx drivers Kconfig dependecies for ARM SA11xx drivers are incorrect, so fix them. [rjw: Changelog] Signed-off-by: Alexander Shiyan Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig index a1488f5..534fcb8 100644 --- a/drivers/cpufreq/Kconfig +++ b/drivers/cpufreq/Kconfig @@ -47,7 +47,7 @@ config CPU_FREQ_STAT_DETAILS choice prompt "Default CPUFreq governor" - default CPU_FREQ_DEFAULT_GOV_USERSPACE if CPU_FREQ_SA1100 || CPU_FREQ_SA1110 + default CPU_FREQ_DEFAULT_GOV_USERSPACE if ARM_SA1100_CPUFREQ || ARM_SA1110_CPUFREQ default CPU_FREQ_DEFAULT_GOV_PERFORMANCE help This option sets which CPUFreq governor shall be loaded at -- cgit v0.10.2 From 1abc4b20b85b42e8573957e54b193385cf48b0d6 Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Tue, 7 May 2013 08:20:25 -0700 Subject: cpufreq / intel_pstate: remove idle time and duration from sample and calculations Idle time is taken into account in the APERF/MPERF ratio calculation there is no reason for the driver to track it seperately. This reduces the work in the driver and makes the code more readable. Removal of the tracking of sample duration removes the possibility of the divide by zero exception when the duration is sub 1us References: https://bugzilla.kernel.org/show_bug.cgi?id=56691 Reported-by: Mike Lothian Cc: 3.9+ Signed-off-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index cc3a8e6..c6e10d0 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -48,12 +48,7 @@ static inline int32_t div_fp(int32_t x, int32_t y) } struct sample { - ktime_t start_time; - ktime_t end_time; int core_pct_busy; - int pstate_pct_busy; - u64 duration_us; - u64 idletime_us; u64 aperf; u64 mperf; int freq; @@ -91,8 +86,6 @@ struct cpudata { int min_pstate_count; int idle_mode; - ktime_t prev_sample; - u64 prev_idle_time_us; u64 prev_aperf; u64 prev_mperf; int sample_ptr; @@ -450,48 +443,26 @@ static inline void intel_pstate_calc_busy(struct cpudata *cpu, struct sample *sample) { u64 core_pct; - sample->pstate_pct_busy = 100 - div64_u64( - sample->idletime_us * 100, - sample->duration_us); core_pct = div64_u64(sample->aperf * 100, sample->mperf); sample->freq = cpu->pstate.max_pstate * core_pct * 1000; - sample->core_pct_busy = div_s64((sample->pstate_pct_busy * core_pct), - 100); + sample->core_pct_busy = core_pct; } static inline void intel_pstate_sample(struct cpudata *cpu) { - ktime_t now; - u64 idle_time_us; u64 aperf, mperf; - now = ktime_get(); - idle_time_us = get_cpu_idle_time_us(cpu->cpu, NULL); - rdmsrl(MSR_IA32_APERF, aperf); rdmsrl(MSR_IA32_MPERF, mperf); - /* for the first sample, don't actually record a sample, just - * set the baseline */ - if (cpu->prev_idle_time_us > 0) { - cpu->sample_ptr = (cpu->sample_ptr + 1) % SAMPLE_COUNT; - cpu->samples[cpu->sample_ptr].start_time = cpu->prev_sample; - cpu->samples[cpu->sample_ptr].end_time = now; - cpu->samples[cpu->sample_ptr].duration_us = - ktime_us_delta(now, cpu->prev_sample); - cpu->samples[cpu->sample_ptr].idletime_us = - idle_time_us - cpu->prev_idle_time_us; - - cpu->samples[cpu->sample_ptr].aperf = aperf; - cpu->samples[cpu->sample_ptr].mperf = mperf; - cpu->samples[cpu->sample_ptr].aperf -= cpu->prev_aperf; - cpu->samples[cpu->sample_ptr].mperf -= cpu->prev_mperf; - - intel_pstate_calc_busy(cpu, &cpu->samples[cpu->sample_ptr]); - } + cpu->sample_ptr = (cpu->sample_ptr + 1) % SAMPLE_COUNT; + cpu->samples[cpu->sample_ptr].aperf = aperf; + cpu->samples[cpu->sample_ptr].mperf = mperf; + cpu->samples[cpu->sample_ptr].aperf -= cpu->prev_aperf; + cpu->samples[cpu->sample_ptr].mperf -= cpu->prev_mperf; + + intel_pstate_calc_busy(cpu, &cpu->samples[cpu->sample_ptr]); - cpu->prev_sample = now; - cpu->prev_idle_time_us = idle_time_us; cpu->prev_aperf = aperf; cpu->prev_mperf = mperf; } -- cgit v0.10.2 From d8f469e9cff3bc4a6317d923e9506be046aa7bdc Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Tue, 7 May 2013 08:20:26 -0700 Subject: cpufreq / intel_pstate: use lowest requested max performance There are two ways that the maximum p-state can be clamped, via a policy change and via the sysfs file. The acpi-thermal driver adjusts the p-state policy in response to thermal events. These changes override the users settings at the moment. Use the lowest of the two requested values this ensures that we will not exceed the requested pstate from either mechanism. Reported-by: Srinivas Pandruvada Cc: 3.9+ Signed-off-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index c6e10d0..4a437ff 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -117,6 +117,8 @@ struct perf_limits { int min_perf_pct; int32_t max_perf; int32_t min_perf; + int max_policy_pct; + int max_sysfs_pct; }; static struct perf_limits limits = { @@ -125,6 +127,8 @@ static struct perf_limits limits = { .max_perf = int_tofp(1), .min_perf_pct = 0, .min_perf = 0, + .max_policy_pct = 100, + .max_sysfs_pct = 100, }; static inline void pid_reset(struct _pid *pid, int setpoint, int busy, @@ -295,7 +299,8 @@ static ssize_t store_max_perf_pct(struct kobject *a, struct attribute *b, if (ret != 1) return -EINVAL; - limits.max_perf_pct = clamp_t(int, input, 0 , 100); + limits.max_sysfs_pct = clamp_t(int, input, 0 , 100); + limits.max_perf_pct = min(limits.max_policy_pct, limits.max_sysfs_pct); limits.max_perf = div_fp(int_tofp(limits.max_perf_pct), int_tofp(100)); return count; } @@ -646,8 +651,9 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy) limits.min_perf_pct = clamp_t(int, limits.min_perf_pct, 0 , 100); limits.min_perf = div_fp(int_tofp(limits.min_perf_pct), int_tofp(100)); - limits.max_perf_pct = policy->max * 100 / policy->cpuinfo.max_freq; - limits.max_perf_pct = clamp_t(int, limits.max_perf_pct, 0 , 100); + limits.max_policy_pct = policy->max * 100 / policy->cpuinfo.max_freq; + limits.max_policy_pct = clamp_t(int, limits.max_policy_pct, 0 , 100); + limits.max_perf_pct = min(limits.max_policy_pct, limits.max_sysfs_pct); limits.max_perf = div_fp(int_tofp(limits.max_perf_pct), int_tofp(100)); return 0; -- cgit v0.10.2 From ca182aee389f8026401510f4c63841cb02c820e8 Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Tue, 7 May 2013 08:20:27 -0700 Subject: cpufreq / intel_pstate: fix ffmpeg regression The ffmpeg benchmark in the phoronix test suite has threads on multiple cores that rely on the progress on of threads on other cores and ping pong back and forth fast enough to make the core appear less busy than it "should" be. If the core has been at minimum p-state for a while bump the pstate up to kick the core to see if it is in this ping pong state. If the core is truly idle the p-state will be reduced at the next sample time. If the core makes more progress it will send more work to the thread bringing both threads out of the ping pong scenario and the p-state will be selected normally. This fixes a performance regression of approximately 30% Cc: 3.9+ Signed-off-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 4a437ff..a7f1946 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -551,22 +551,16 @@ static void intel_pstate_timer_func(unsigned long __data) struct cpudata *cpu = (struct cpudata *) __data; intel_pstate_sample(cpu); + intel_pstate_adjust_busy_pstate(cpu); - if (!cpu->idle_mode) - intel_pstate_adjust_busy_pstate(cpu); - else - intel_pstate_adjust_idle_pstate(cpu); - -#if defined(XPERF_FIX) if (cpu->pstate.current_pstate == cpu->pstate.min_pstate) { cpu->min_pstate_count++; if (!(cpu->min_pstate_count % 5)) { intel_pstate_set_pstate(cpu, cpu->pstate.max_pstate); - intel_pstate_idle_mode(cpu); } } else cpu->min_pstate_count = 0; -#endif + intel_pstate_set_sample_time(cpu); } -- cgit v0.10.2 From a73108d578559c83e35fa386a4058142a019b8d4 Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Tue, 7 May 2013 08:20:28 -0700 Subject: cpufreq / intel_pstate: Remove idle mode PID Remove dead code from the driver. Signed-off-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index a7f1946..b93e385 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -81,10 +81,8 @@ struct cpudata { struct pstate_adjust_policy *pstate_policy; struct pstate_data pstate; struct _pid pid; - struct _pid idle_pid; int min_pstate_count; - int idle_mode; u64 prev_aperf; u64 prev_mperf; @@ -199,19 +197,6 @@ static inline void intel_pstate_busy_pid_reset(struct cpudata *cpu) 0); } -static inline void intel_pstate_idle_pid_reset(struct cpudata *cpu) -{ - pid_p_gain_set(&cpu->idle_pid, cpu->pstate_policy->p_gain_pct); - pid_d_gain_set(&cpu->idle_pid, cpu->pstate_policy->d_gain_pct); - pid_i_gain_set(&cpu->idle_pid, cpu->pstate_policy->i_gain_pct); - - pid_reset(&cpu->idle_pid, - 75, - 50, - cpu->pstate_policy->deadband, - 0); -} - static inline void intel_pstate_reset_all_pid(void) { unsigned int cpu; @@ -481,16 +466,6 @@ static inline void intel_pstate_set_sample_time(struct cpudata *cpu) mod_timer_pinned(&cpu->timer, jiffies + delay); } -static inline void intel_pstate_idle_mode(struct cpudata *cpu) -{ - cpu->idle_mode = 1; -} - -static inline void intel_pstate_normal_mode(struct cpudata *cpu) -{ - cpu->idle_mode = 0; -} - static inline int intel_pstate_get_scaled_busy(struct cpudata *cpu) { int32_t busy_scaled; @@ -523,29 +498,6 @@ static inline void intel_pstate_adjust_busy_pstate(struct cpudata *cpu) intel_pstate_pstate_decrease(cpu, steps); } -static inline void intel_pstate_adjust_idle_pstate(struct cpudata *cpu) -{ - int busy_scaled; - struct _pid *pid; - int ctl = 0; - int steps; - - pid = &cpu->idle_pid; - - busy_scaled = intel_pstate_get_scaled_busy(cpu); - - ctl = pid_calc(pid, 100 - busy_scaled); - - steps = abs(ctl); - if (ctl < 0) - intel_pstate_pstate_decrease(cpu, steps); - else - intel_pstate_pstate_increase(cpu, steps); - - if (cpu->pstate.current_pstate == cpu->pstate.min_pstate) - intel_pstate_normal_mode(cpu); -} - static void intel_pstate_timer_func(unsigned long __data) { struct cpudata *cpu = (struct cpudata *) __data; @@ -601,7 +553,6 @@ static int intel_pstate_init_cpu(unsigned int cpunum) (unsigned long)cpu; cpu->timer.expires = jiffies + HZ/100; intel_pstate_busy_pid_reset(cpu); - intel_pstate_idle_pid_reset(cpu); intel_pstate_sample(cpu); intel_pstate_set_pstate(cpu, cpu->pstate.max_pstate); -- cgit v0.10.2 From 35363e943f2b0aa503e1dd55f894f736563e85a3 Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Tue, 7 May 2013 08:20:30 -0700 Subject: cpufreq / intel_pstate: remove #ifdef MODULE compile fence The driver can no longer be built as a module remove the compile fence around cpufreq tracing call. Signed-off-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index b93e385..0cc7d60 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -391,9 +391,8 @@ static void intel_pstate_set_pstate(struct cpudata *cpu, int pstate) if (pstate == cpu->pstate.current_pstate) return; -#ifndef MODULE trace_cpu_frequency(pstate * 100000, cpu->cpu); -#endif + cpu->pstate.current_pstate = pstate; wrmsrl(MSR_IA32_PERF_CTL, pstate << 8); -- cgit v0.10.2 From d96f7330176d69a9415162fb341b87e724e9ca74 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 10 May 2013 08:16:48 +0000 Subject: cpufreq / kirkwood: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/kirkwood-cpufreq.c b/drivers/cpufreq/kirkwood-cpufreq.c index d36ea8d..b2644af 100644 --- a/drivers/cpufreq/kirkwood-cpufreq.c +++ b/drivers/cpufreq/kirkwood-cpufreq.c @@ -171,10 +171,6 @@ static int kirkwood_cpufreq_probe(struct platform_device *pdev) priv.dev = &pdev->dev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "Cannot get memory resource\n"); - return -ENODEV; - } priv.base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(priv.base)) return PTR_ERR(priv.base); -- cgit v0.10.2 From d5e1670afe0c886d6dd92afb7a1f085f88294dc8 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Wed, 8 May 2013 01:14:32 +0200 Subject: PM: Avoid calling kfree() under spinlock in dev_pm_put_subsys_data() Fix dev_pm_put_subsys_data() so that it doesn't call kfree() under a spinlock and make it return 1 whenever it leaves NULL power.subsys_data (regardless of the reason). Signed-off-by: Shuah Khan Reviewed-by: Pavel Machek Acked-by: Greg Kroah-Hartman Signed-off-by: Rafael J. Wysocki diff --git a/drivers/base/power/common.c b/drivers/base/power/common.c index 39c3252..5da9140 100644 --- a/drivers/base/power/common.c +++ b/drivers/base/power/common.c @@ -61,24 +61,24 @@ EXPORT_SYMBOL_GPL(dev_pm_get_subsys_data); int dev_pm_put_subsys_data(struct device *dev) { struct pm_subsys_data *psd; - int ret = 0; + int ret = 1; spin_lock_irq(&dev->power.lock); psd = dev_to_psd(dev); - if (!psd) { - ret = -EINVAL; + if (!psd) goto out; - } if (--psd->refcount == 0) { dev->power.subsys_data = NULL; - kfree(psd); - ret = 1; + } else { + psd = NULL; + ret = 0; } out: spin_unlock_irq(&dev->power.lock); + kfree(psd); return ret; } -- cgit v0.10.2 From 29589f06d2430efb76c227b0117029ebd3101eec Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:46 +0200 Subject: drivers/ata: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang diff --git a/drivers/ata/pata_ep93xx.c b/drivers/ata/pata_ep93xx.c index c1bfaf4..980b88e 100644 --- a/drivers/ata/pata_ep93xx.c +++ b/drivers/ata/pata_ep93xx.c @@ -933,11 +933,6 @@ static int ep93xx_pata_probe(struct platform_device *pdev) } mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem_res) { - err = -ENXIO; - goto err_rel_gpio; - } - ide_base = devm_ioremap_resource(&pdev->dev, mem_res); if (IS_ERR(ide_base)) { err = PTR_ERR(ide_base); -- cgit v0.10.2 From 2a9ba2ee5f440dd6712ebcb5011e9f00309187c5 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:46 +0200 Subject: drivers/char/hw_random: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang diff --git a/drivers/char/hw_random/mxc-rnga.c b/drivers/char/hw_random/mxc-rnga.c index 4ca35e8..19a12ac 100644 --- a/drivers/char/hw_random/mxc-rnga.c +++ b/drivers/char/hw_random/mxc-rnga.c @@ -167,11 +167,6 @@ static int __init mxc_rnga_probe(struct platform_device *pdev) clk_prepare_enable(mxc_rng->clk); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - err = -ENOENT; - goto err_region; - } - mxc_rng->mem = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(mxc_rng->mem)) { err = PTR_ERR(mxc_rng->mem); @@ -189,7 +184,6 @@ static int __init mxc_rnga_probe(struct platform_device *pdev) return 0; err_ioremap: -err_region: clk_disable_unprepare(mxc_rng->clk); out: diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c index 749dc16..d2903e7 100644 --- a/drivers/char/hw_random/omap-rng.c +++ b/drivers/char/hw_random/omap-rng.c @@ -119,11 +119,6 @@ static int omap_rng_probe(struct platform_device *pdev) dev_set_drvdata(&pdev->dev, priv); priv->mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!priv->mem_res) { - ret = -ENOENT; - goto err_ioremap; - } - priv->base = devm_ioremap_resource(&pdev->dev, priv->mem_res); if (IS_ERR(priv->base)) { ret = PTR_ERR(priv->base); -- cgit v0.10.2 From 72cd7447e72a13ce72d760b42ec295430f77300a Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Wed, 17 Apr 2013 12:05:58 +0200 Subject: ARM i.MX6q: Fix periph_clk2_sel and periph2_clk2_sel clocks The periph_clk2_sel mux can be set to pll3, osc/pll1_ref_clk, or osc/ pll2_burn_in_clk. The periph2_clk2_sel mux can be set to pll3 or pll2. Signed-off-by: Philipp Zabel Signed-off-by: Shawn Guo diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 1512590..ca17171 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -177,7 +177,8 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) static const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", }; -static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", }; +static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", }; +static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", }; static const char *periph_sels[] = { "periph_pre", "periph_clk2", }; static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "pll3_pfd1_540m", }; @@ -369,8 +370,8 @@ int __init mx6q_clocks_init(void) clk[pll1_sw] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels)); clk[periph_pre] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); clk[periph2_pre] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); - clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); - clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); + clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); + clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels)); clk[axi_sel] = imx_clk_mux("axi_sel", base + 0x14, 6, 2, axi_sels, ARRAY_SIZE(axi_sels)); clk[esai_sel] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels)); clk[asrc_sel] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels)); -- cgit v0.10.2 From 0e574461c4c915a065dd75c894edb653ce99be9c Mon Sep 17 00:00:00 2001 From: Dirk Behme Date: Mon, 22 Apr 2013 08:00:34 +0200 Subject: ARM i.MX6: correct MLB clock configuration According to the i.MX6 Dual/Quad technical reference manual (Figure 18-2. Clock Tree - Part 1) the MLB clock is directly feed by the AXI_CLK_ROOT. This is called 'axi' in our code. Note that the clock of the MLB IP block on the i.MX6 is completely independent of the PLL8 (MLB PLL). The MLB PLL isn't responsible for feeding the MLB IP block with a clock. Instead, it's used internally by the MLB module to sync the bus clock in case the MLB 6-pin interface is enabled: MediaLB Control 0 Register, MLB150_MLBC0[5], MLBPEN: 1 MediaLB 6-pin interface enabled. MLB PLL and MLB PHY is enabled in this case. I.e. the PLL8 MLB PLL has to be handled by the MLB driver and isn't needed for clocking the MLB module itself. Signed-off-by: Dirk Behme CC: Jiada Wang Signed-off-by: Shawn Guo diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index ca17171..f2e1c62 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -499,7 +499,7 @@ int __init mx6q_clocks_init(void) clk[ldb_di1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14); clk[ipu2_di1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10); clk[hsi_tx] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16); - clk[mlb] = imx_clk_gate2("mlb", "pll8_mlb", base + 0x74, 18); + clk[mlb] = imx_clk_gate2("mlb", "axi", base + 0x74, 18); clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20); clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22); clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28); -- cgit v0.10.2 From 087bb28329f3ccda4e50cb4cf297542d7e773e20 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Tue, 16 Apr 2013 22:11:19 +0800 Subject: ARM: imx: replicate the diagnostic register of boot cpu into secondary cores The diagnostic register holds the errata bits. Mostly bootloader does not bring up secondary cores, so that when errata bits are set in bootloader, they are set only for boot cpu. But on a SMP configuration, it should be equally done on every single core. Set up the diagnostic register for secondary cores by replicating the register from boot cpu. Signed-off-by: Shawn Guo Acked-by: Dirk Behme diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S index 67b9c48..627f16f 100644 --- a/arch/arm/mach-imx/headsmp.S +++ b/arch/arm/mach-imx/headsmp.S @@ -18,8 +18,20 @@ .section ".text.head", "ax" #ifdef CONFIG_SMP +diag_reg_offset: + .word g_diag_reg - . + + .macro set_diag_reg + adr r0, diag_reg_offset + ldr r1, [r0] + add r1, r1, r0 @ r1 = physical &g_diag_reg + ldr r0, [r1] + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register + .endm + ENTRY(v7_secondary_startup) bl v7_invalidate_l1 + set_diag_reg b secondary_startup ENDPROC(v7_secondary_startup) #endif diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index 4a69305..c6e1ab5 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -12,6 +12,7 @@ #include #include +#include #include #include #include @@ -21,6 +22,7 @@ #define SCU_STANDBY_ENABLE (1 << 5) +u32 g_diag_reg; static void __iomem *scu_base; static struct map_desc scu_io_desc __initdata = { @@ -80,6 +82,18 @@ void imx_smp_prepare(void) static void __init imx_smp_prepare_cpus(unsigned int max_cpus) { imx_smp_prepare(); + + /* + * The diagnostic register holds the errata bits. Mostly bootloader + * does not bring up secondary cores, so that when errata bits are set + * in bootloader, they are set only for boot cpu. But on a SMP + * configuration, it should be equally done on every single core. + * Read the register from boot cpu here, and will replicate it into + * secondary cores when booting them. + */ + asm("mrc p15, 0, %0, c15, c0, 1" : "=r" (g_diag_reg) : : "cc"); + __cpuc_flush_dcache_area(&g_diag_reg, sizeof(g_diag_reg)); + outer_clean_range(__pa(&g_diag_reg), __pa(&g_diag_reg + 1)); } struct smp_operations imx_smp_ops __initdata = { -- cgit v0.10.2 From de78a23d73ba7f1d08f3e1aeaa0a03cb912c62a0 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Fri, 3 May 2013 10:55:46 +0800 Subject: ARM: imx: fix typo in gpu3d_shader_sels There is no clock pll2_pfd9_720m. Instead it should be pll3_pfd0_720m. Fix the typo in gpu3d_shader_sels. Signed-off-by: Shawn Guo Acked-by: Dirk Behme diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index f2e1c62..dda9a2b 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -186,7 +186,7 @@ static const char *audio_sels[] = { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd static const char *gpu_axi_sels[] = { "axi", "ahb", }; static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", }; static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", }; -static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", }; +static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll3_pfd0_720m", }; static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", }; static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", }; static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", }; -- cgit v0.10.2 From 68e850d80df934b9c9c15d8a0956512cb3b6f1fc Mon Sep 17 00:00:00 2001 From: Dimitris Papastamos Date: Thu, 9 May 2013 12:46:41 +0100 Subject: regmap: debugfs: Check return value of regmap_write() Signed-off-by: Dimitris Papastamos Signed-off-by: Mark Brown diff --git a/drivers/base/regmap/regmap-debugfs.c b/drivers/base/regmap/regmap-debugfs.c index 23b701f..975719b 100644 --- a/drivers/base/regmap/regmap-debugfs.c +++ b/drivers/base/regmap/regmap-debugfs.c @@ -265,6 +265,7 @@ static ssize_t regmap_map_write_file(struct file *file, char *start = buf; unsigned long reg, value; struct regmap *map = file->private_data; + int ret; buf_size = min(count, (sizeof(buf)-1)); if (copy_from_user(buf, user_buf, buf_size)) @@ -282,7 +283,9 @@ static ssize_t regmap_map_write_file(struct file *file, /* Userspace has been fiddling around behind the kernel's back */ add_taint(TAINT_USER, LOCKDEP_NOW_UNRELIABLE); - regmap_write(map, reg, value); + ret = regmap_write(map, reg, value); + if (ret < 0) + return ret; return buf_size; } #else -- cgit v0.10.2 From 625cdd78d119d5848ac3c47d129bdf5f23f64120 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 11 May 2013 19:13:49 +0300 Subject: svcauth_gss: fix error code in use_gss_proxy() This should return zero on success and -EBUSY on error so the type needs to be int instead of bool. Signed-off-by: Dan Carpenter Signed-off-by: J. Bruce Fields diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c index 871c73c..2c6a1ec 100644 --- a/net/sunrpc/auth_gss/svcauth_gss.c +++ b/net/sunrpc/auth_gss/svcauth_gss.c @@ -1287,7 +1287,7 @@ static bool use_gss_proxy(struct net *net) #ifdef CONFIG_PROC_FS -static bool set_gss_proxy(struct net *net, int type) +static int set_gss_proxy(struct net *net, int type) { struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); int ret = 0; -- cgit v0.10.2 From ed7951dc13aad4a14695ec8122e9f0e2ef25d39e Mon Sep 17 00:00:00 2001 From: "Lespiau, Damien" Date: Fri, 10 May 2013 12:36:42 +0000 Subject: drm: Make the HPD status updates debug logs more readable MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Instead of just printing "status updated from 1 to 2", make those enum numbers immediately readable. v2: Also patch output_poll_execute() (Daniel Vetter) v3: Use drm_get_connector_status_name (Ville Syrjälä) Signed-off-by: Damien Lespiau Reviewed-by: Jesse Barnes (for v1) Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index d7c449f..e7e9242 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -250,6 +250,7 @@ char *drm_get_connector_status_name(enum drm_connector_status status) else return "unknown"; } +EXPORT_SYMBOL(drm_get_connector_status_name); /** * drm_mode_object_get - allocate a new modeset identifier diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 62f45ad..9085db6 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -1007,10 +1007,11 @@ static void output_poll_execute(struct work_struct *work) continue; connector->status = connector->funcs->detect(connector, false); - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %d to %d\n", + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n", connector->base.id, drm_get_connector_name(connector), - old_status, connector->status); + drm_get_connector_status_name(old_status), + drm_get_connector_status_name(connector->status)); if (old_status != connector->status) changed = true; } @@ -1085,10 +1086,11 @@ void drm_helper_hpd_irq_event(struct drm_device *dev) old_status = connector->status; connector->status = connector->funcs->detect(connector, false); - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %d to %d\n", + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n", connector->base.id, drm_get_connector_name(connector), - old_status, connector->status); + drm_get_connector_status_name(old_status), + drm_get_connector_status_name(connector->status)); if (old_status != connector->status) changed = true; } -- cgit v0.10.2 From b2dfcae3cc6802e897556e09541080309cfdec60 Mon Sep 17 00:00:00 2001 From: "Lespiau, Damien" Date: Fri, 10 May 2013 12:36:44 +0000 Subject: drm: Only print a debug message when the polled connector has changed Suggested-by: Chris Wilson Signed-off-by: Damien Lespiau Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 9085db6..ed1334e 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -1007,13 +1007,20 @@ static void output_poll_execute(struct work_struct *work) continue; connector->status = connector->funcs->detect(connector, false); - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n", - connector->base.id, - drm_get_connector_name(connector), - drm_get_connector_status_name(old_status), - drm_get_connector_status_name(connector->status)); - if (old_status != connector->status) + if (old_status != connector->status) { + const char *old, *new; + + old = drm_get_connector_status_name(old_status); + new = drm_get_connector_status_name(connector->status); + + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] " + "status updated from %s to %s\n", + connector->base.id, + drm_get_connector_name(connector), + old, new); + changed = true; + } } mutex_unlock(&dev->mode_config.mutex); -- cgit v0.10.2 From 9d8aa55ff6bd21f573581a29da32ad746f2edcfb Mon Sep 17 00:00:00 2001 From: Christopher Harvey Date: Fri, 12 Apr 2013 20:42:19 +0000 Subject: drm/mgag200: Don't change unrelated registers during modeset Registers in indices below 0x18 are totally unrelated to modesetting, so don't write 0's, or anything else into them on modeset. Most of these registers are hardware cursor related, so this existing code interferes with hardware cursor development. Signed-off-by: Christopher Harvey Tested-by: Julia Lemire Acked-by: Julia Lemire Acked-by: Mathieu Larouche Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c index 7337013..2affe7a 100644 --- a/drivers/gpu/drm/mgag200/mgag200_mode.c +++ b/drivers/gpu/drm/mgag200/mgag200_mode.c @@ -832,11 +832,7 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc, for (i = 0; i < sizeof(dacvalue); i++) { - if ((i <= 0x03) || - (i == 0x07) || - (i == 0x0b) || - (i == 0x0f) || - ((i >= 0x13) && (i <= 0x17)) || + if ((i <= 0x17) || (i == 0x1b) || (i == 0x1c) || ((i >= 0x1f) && (i <= 0x29)) || -- cgit v0.10.2 From fb70a6690875315a3a1454e52fa339441ee7612b Mon Sep 17 00:00:00 2001 From: Christopher Harvey Date: Fri, 12 Apr 2013 22:24:05 +0000 Subject: drm/mgag200: Fix writes into MGA1064_PIX_CLK_CTL register The original line, WREG_DAC(MGA1064_PIX_CLK_CTL_CLK_DIS, tmp); wrote tmp into MGA1064_PIX_CLK_CTL_CLK_DIS, where MGA1064_PIX_CLK_CTL_CLK_DIS is an offset into MGA1064_PIX_CLK_CTL. Change the line to write properly into MGA1064_PIX_CLK_CTL. There were other chunks of code nearby that use the same pattern (but work correctly), so this patch updates them all to use this new (slightly more efficient) write pattern. The WREG_DAC macro was causing the DAC_INDEX register to be set to the same value twice. WREG8(DAC_DATA, foo) takes advantage of the fact that DAC_INDEX is already at the value we want. Signed-off-by: Christopher Harvey Acked-by: Julia Lemire Tested-by: Julia Lemire Acked-by: Mathieu Larouche Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c index 2affe7a..d983868 100644 --- a/drivers/gpu/drm/mgag200/mgag200_mode.c +++ b/drivers/gpu/drm/mgag200/mgag200_mode.c @@ -189,12 +189,12 @@ static int mga_g200wb_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp |= MGA1064_PIX_CLK_CTL_CLK_DIS; - WREG_DAC(MGA1064_PIX_CLK_CTL_CLK_DIS, tmp); + WREG8(DAC_DATA, tmp); WREG8(DAC_INDEX, MGA1064_REMHEADCTL); tmp = RREG8(DAC_DATA); tmp |= MGA1064_REMHEADCTL_CLKDIS; - WREG_DAC(MGA1064_REMHEADCTL, tmp); + WREG8(DAC_DATA, tmp); /* select PLL Set C */ tmp = RREG8(MGAREG_MEM_MISC_READ); @@ -204,7 +204,7 @@ static int mga_g200wb_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp |= MGA1064_PIX_CLK_CTL_CLK_POW_DOWN | 0x80; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); udelay(500); @@ -212,7 +212,7 @@ static int mga_g200wb_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_VREF_CTL); tmp = RREG8(DAC_DATA); tmp &= ~0x04; - WREG_DAC(MGA1064_VREF_CTL, tmp); + WREG8(DAC_DATA, tmp); udelay(50); @@ -236,13 +236,13 @@ static int mga_g200wb_set_plls(struct mga_device *mdev, long clock) tmp = RREG8(DAC_DATA); tmp &= ~MGA1064_PIX_CLK_CTL_SEL_MSK; tmp |= MGA1064_PIX_CLK_CTL_SEL_PLL; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); WREG8(DAC_INDEX, MGA1064_REMHEADCTL); tmp = RREG8(DAC_DATA); tmp &= ~MGA1064_REMHEADCTL_CLKSL_MSK; tmp |= MGA1064_REMHEADCTL_CLKSL_PLL; - WREG_DAC(MGA1064_REMHEADCTL, tmp); + WREG8(DAC_DATA, tmp); /* reset dotclock rate bit */ WREG8(MGAREG_SEQ_INDEX, 1); @@ -253,7 +253,7 @@ static int mga_g200wb_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp &= ~MGA1064_PIX_CLK_CTL_CLK_DIS; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); vcount = RREG8(MGAREG_VCOUNT); @@ -318,7 +318,7 @@ static int mga_g200ev_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp |= MGA1064_PIX_CLK_CTL_CLK_DIS; - WREG_DAC(MGA1064_PIX_CLK_CTL_CLK_DIS, tmp); + WREG8(DAC_DATA, tmp); tmp = RREG8(MGAREG_MEM_MISC_READ); tmp |= 0x3 << 2; @@ -326,12 +326,12 @@ static int mga_g200ev_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_PIX_PLL_STAT); tmp = RREG8(DAC_DATA); - WREG_DAC(MGA1064_PIX_PLL_STAT, tmp & ~0x40); + WREG8(DAC_DATA, tmp & ~0x40); WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp |= MGA1064_PIX_CLK_CTL_CLK_POW_DOWN; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); WREG_DAC(MGA1064_EV_PIX_PLLC_M, m); WREG_DAC(MGA1064_EV_PIX_PLLC_N, n); @@ -342,7 +342,7 @@ static int mga_g200ev_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp &= ~MGA1064_PIX_CLK_CTL_CLK_POW_DOWN; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); udelay(500); @@ -350,11 +350,11 @@ static int mga_g200ev_set_plls(struct mga_device *mdev, long clock) tmp = RREG8(DAC_DATA); tmp &= ~MGA1064_PIX_CLK_CTL_SEL_MSK; tmp |= MGA1064_PIX_CLK_CTL_SEL_PLL; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); WREG8(DAC_INDEX, MGA1064_PIX_PLL_STAT); tmp = RREG8(DAC_DATA); - WREG_DAC(MGA1064_PIX_PLL_STAT, tmp | 0x40); + WREG8(DAC_DATA, tmp | 0x40); tmp = RREG8(MGAREG_MEM_MISC_READ); tmp |= (0x3 << 2); @@ -363,7 +363,7 @@ static int mga_g200ev_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp &= ~MGA1064_PIX_CLK_CTL_CLK_DIS; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); return 0; } @@ -416,7 +416,7 @@ static int mga_g200eh_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp |= MGA1064_PIX_CLK_CTL_CLK_DIS; - WREG_DAC(MGA1064_PIX_CLK_CTL_CLK_DIS, tmp); + WREG8(DAC_DATA, tmp); tmp = RREG8(MGAREG_MEM_MISC_READ); tmp |= 0x3 << 2; @@ -425,7 +425,7 @@ static int mga_g200eh_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp |= MGA1064_PIX_CLK_CTL_CLK_POW_DOWN; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); udelay(500); @@ -439,13 +439,13 @@ static int mga_g200eh_set_plls(struct mga_device *mdev, long clock) tmp = RREG8(DAC_DATA); tmp &= ~MGA1064_PIX_CLK_CTL_SEL_MSK; tmp |= MGA1064_PIX_CLK_CTL_SEL_PLL; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp &= ~MGA1064_PIX_CLK_CTL_CLK_DIS; tmp &= ~MGA1064_PIX_CLK_CTL_CLK_POW_DOWN; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); vcount = RREG8(MGAREG_VCOUNT); @@ -515,12 +515,12 @@ static int mga_g200er_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp |= MGA1064_PIX_CLK_CTL_CLK_DIS; - WREG_DAC(MGA1064_PIX_CLK_CTL_CLK_DIS, tmp); + WREG8(DAC_DATA, tmp); WREG8(DAC_INDEX, MGA1064_REMHEADCTL); tmp = RREG8(DAC_DATA); tmp |= MGA1064_REMHEADCTL_CLKDIS; - WREG_DAC(MGA1064_REMHEADCTL, tmp); + WREG8(DAC_DATA, tmp); tmp = RREG8(MGAREG_MEM_MISC_READ); tmp |= (0x3<<2) | 0xc0; @@ -530,7 +530,7 @@ static int mga_g200er_set_plls(struct mga_device *mdev, long clock) tmp = RREG8(DAC_DATA); tmp &= ~MGA1064_PIX_CLK_CTL_CLK_DIS; tmp |= MGA1064_PIX_CLK_CTL_CLK_POW_DOWN; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); udelay(500); -- cgit v0.10.2 From 3cdc0e8d6142aaf3eb84a53eab6de1160da290a3 Mon Sep 17 00:00:00 2001 From: Christopher Harvey Date: Mon, 6 May 2013 15:56:17 +0000 Subject: drm/mgag200: Convert counter delays to jiffies Signed-off-by: Christopher Harvey Acked-by: Julia Lemire Tested-by: Julia Lemire Acked-by: Mathieu Larouche Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c index d983868..0326989 100644 --- a/drivers/gpu/drm/mgag200/mgag200_mode.c +++ b/drivers/gpu/drm/mgag200/mgag200_mode.c @@ -46,29 +46,26 @@ static void mga_crtc_load_lut(struct drm_crtc *crtc) static inline void mga_wait_vsync(struct mga_device *mdev) { - unsigned int count = 0; + unsigned long timeout = jiffies + HZ/10; unsigned int status = 0; do { status = RREG32(MGAREG_Status); - count++; - } while ((status & 0x08) && (count < 250000)); - count = 0; + } while ((status & 0x08) && time_before(jiffies, timeout)); + timeout = jiffies + HZ/10; status = 0; do { status = RREG32(MGAREG_Status); - count++; - } while (!(status & 0x08) && (count < 250000)); + } while (!(status & 0x08) && time_before(jiffies, timeout)); } static inline void mga_wait_busy(struct mga_device *mdev) { - unsigned int count = 0; + unsigned long timeout = jiffies + HZ; unsigned int status = 0; do { status = RREG8(MGAREG_Status + 2); - count++; - } while ((status & 0x01) && (count < 500000)); + } while ((status & 0x01) && time_before(jiffies, timeout)); } /* -- cgit v0.10.2 From 9f1d036648c1c5ed81b0e98d7a06d55df972701e Mon Sep 17 00:00:00 2001 From: Christopher Harvey Date: Wed, 8 May 2013 19:10:38 +0000 Subject: drm/mgag200: Fix framebuffer base address programming Higher bits of the base address of framebuffers weren't being programmed properly. This caused framebuffers that didn't happen to be allocated at a low enough address to not be displayed properly. Signed-off-by: Christopher Harvey Signed-off-by: Mathieu Larouche Acked-by: Julia Lemire Tested-by: Julia Lemire Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c index 0326989..e8e20c6 100644 --- a/drivers/gpu/drm/mgag200/mgag200_mode.c +++ b/drivers/gpu/drm/mgag200/mgag200_mode.c @@ -654,12 +654,26 @@ static void mga_g200wb_commit(struct drm_crtc *crtc) WREG_DAC(MGA1064_GEN_IO_DATA, tmp); } - +/* + This is how the framebuffer base address is stored in g200 cards: + * Assume @offset is the gpu_addr variable of the framebuffer object + * Then addr is the number of _pixels_ (not bytes) from the start of + VRAM to the first pixel we want to display. (divided by 2 for 32bit + framebuffers) + * addr is stored in the CRTCEXT0, CRTCC and CRTCD registers + addr<20> -> CRTCEXT0<6> + addr<19-16> -> CRTCEXT0<3-0> + addr<15-8> -> CRTCC<7-0> + addr<7-0> -> CRTCD<7-0> + CRTCEXT0 has to be programmed last to trigger an update and make the + new addr variable take effect. + */ void mga_set_start_address(struct drm_crtc *crtc, unsigned offset) { struct mga_device *mdev = crtc->dev->dev_private; u32 addr; int count; + u8 crtcext0; while (RREG8(0x1fda) & 0x08); while (!(RREG8(0x1fda) & 0x08)); @@ -667,10 +681,17 @@ void mga_set_start_address(struct drm_crtc *crtc, unsigned offset) count = RREG8(MGAREG_VCOUNT) + 2; while (RREG8(MGAREG_VCOUNT) < count); - addr = offset >> 2; + WREG8(MGAREG_CRTCEXT_INDEX, 0); + crtcext0 = RREG8(MGAREG_CRTCEXT_DATA); + crtcext0 &= 0xB0; + addr = offset / 8; + /* Can't store addresses any higher than that... + but we also don't have more than 16MB of memory, so it should be fine. */ + WARN_ON(addr > 0x1fffff); + crtcext0 |= (!!(addr & (1<<20)))<<6; WREG_CRT(0x0d, (u8)(addr & 0xff)); WREG_CRT(0x0c, (u8)(addr >> 8) & 0xff); - WREG_CRT(0xaf, (u8)(addr >> 16) & 0xf); + WREG_ECRT(0x0, ((u8)(addr >> 16) & 0xf) | crtcext0); } -- cgit v0.10.2 From fefaedcfb82d2e57c2320acf60604ab03b750cc0 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Sun, 12 May 2013 22:00:51 -0700 Subject: drm/radeon: check incoming cliprects pointer The "boxes" parameter points into userspace memory. It should be verified like any other operation against user memory. Signed-off-by: Kees Cook Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/r300_cmdbuf.c b/drivers/gpu/drm/radeon/r300_cmdbuf.c index 865e2c9..60170ea 100644 --- a/drivers/gpu/drm/radeon/r300_cmdbuf.c +++ b/drivers/gpu/drm/radeon/r300_cmdbuf.c @@ -75,7 +75,7 @@ static int r300_emit_cliprects(drm_radeon_private_t *dev_priv, OUT_RING(CP_PACKET0(R300_RE_CLIPRECT_TL_0, nr * 2 - 1)); for (i = 0; i < nr; ++i) { - if (DRM_COPY_FROM_USER_UNCHECKED + if (DRM_COPY_FROM_USER (&box, &cmdbuf->boxes[n + i], sizeof(box))) { DRM_ERROR("copy cliprect faulted\n"); return -EFAULT; -- cgit v0.10.2 From 95643359f8b31e74b35901f4e36cd069cd67fd48 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 13 May 2013 15:23:49 +1000 Subject: drm: remove unused wrapper macros We don't use these anymore so nuke them. Signed-off-by: Dave Airlie diff --git a/include/drm/drm_os_linux.h b/include/drm/drm_os_linux.h index 3933691..675ddf4 100644 --- a/include/drm/drm_os_linux.h +++ b/include/drm/drm_os_linux.h @@ -87,15 +87,6 @@ static __inline__ int mtrr_del(int reg, unsigned long base, unsigned long size) /** Other copying of data from kernel space */ #define DRM_COPY_TO_USER(arg1, arg2, arg3) \ copy_to_user(arg1, arg2, arg3) -/* Macros for copyfrom user, but checking readability only once */ -#define DRM_VERIFYAREA_READ( uaddr, size ) \ - (access_ok( VERIFY_READ, uaddr, size ) ? 0 : -EFAULT) -#define DRM_COPY_FROM_USER_UNCHECKED(arg1, arg2, arg3) \ - __copy_from_user(arg1, arg2, arg3) -#define DRM_COPY_TO_USER_UNCHECKED(arg1, arg2, arg3) \ - __copy_to_user(arg1, arg2, arg3) -#define DRM_GET_USER_UNCHECKED(val, uaddr) \ - __get_user(val, uaddr) #define DRM_HZ HZ -- cgit v0.10.2 From d34c671debe3d327424a9951a5c3a81065d0474d Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 18 Apr 2013 22:44:29 +0200 Subject: ARM: sunxi: Fix Mini X-plus device tree build Commit b00adbe0 ("ARM: sunxi: Rename uart nodes to serial") changed the node names in the DTSI, changes that were not accordingly made to the Mini X-Plus device tree. This breakage slipped through because it was not properly declared in the Makefile. Fix both issues. Signed-off-by: Maxime Ripard diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b9f7121..f0895c5 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -177,7 +177,9 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ spear320-evb.dtb \ spear320-hmi.dtb dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb -dtb-$(CONFIG_ARCH_SUNXI) += sun4i-a10-cubieboard.dtb \ +dtb-$(CONFIG_ARCH_SUNXI) += \ + sun4i-a10-cubieboard.dtb \ + sun4i-a10-mini-xplus.dtb \ sun4i-a10-hackberry.dtb \ sun5i-a13-olinuxino.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index 4a7c35d..078ed7f 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -22,8 +22,8 @@ bootargs = "earlyprintk console=ttyS0,115200"; }; - soc { - uart0: uart@01c28000 { + soc@01c20000 { + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; -- cgit v0.10.2 From 182a6f73ec6bc83ce9b72eec20fa1c6901338c16 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Fri, 19 Apr 2013 11:53:07 +0100 Subject: arm64: Fix duplicate definition of early_console When compiling with allmodconfig. early_console is already defined as an extern global pointer. Need let it point to the object which we intend to (like arm32 done). Signed-off-by: Chen Gang Acked-by: Arnd Bergmann Signed-off-by: Catalin Marinas diff --git a/arch/arm64/kernel/early_printk.c b/arch/arm64/kernel/early_printk.c index ac974f4..fbb6e18 100644 --- a/arch/arm64/kernel/early_printk.c +++ b/arch/arm64/kernel/early_printk.c @@ -95,7 +95,7 @@ static void early_write(struct console *con, const char *s, unsigned n) } } -static struct console early_console = { +static struct console early_console_dev = { .name = "earlycon", .write = early_write, .flags = CON_PRINTBUFFER | CON_BOOT, @@ -145,7 +145,8 @@ static int __init setup_early_printk(char *buf) early_base = early_io_map(paddr, EARLYCON_IOBASE); printch = match->printch; - register_console(&early_console); + early_console = &early_console_dev; + register_console(&early_console_dev); return 0; } -- cgit v0.10.2 From 9c413e25d95fd3c0abe23eadad66191b22baa549 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 8 May 2013 17:01:12 +0100 Subject: arm64: debug: clear mdscr_el1 instead of taking the OS lock During boot, we take the debug OS lock before interrupts are enabled. This is required to prevent clearing of PSTATE.D on the interrupt entry path, which could result in spurious debug exceptions before we've got round to resetting things like the hardware breakpoints registers to a sane state. A problem with this approach is that taking the OS lock prevents an external JTAG debugger from debugging the system, which is especially irritating during boot, where JTAG debugging can be most useful. This patch clears mdscr_el1 rather than taking the lock, clearing the MDE and KDE bits and preventing self-hosted hardware debug exceptions from occurring. Tested-by: Mark Rutland Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas Cc: stable@vger.kernel.org diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c index 0c3ba9f..f4726dc 100644 --- a/arch/arm64/kernel/debug-monitors.c +++ b/arch/arm64/kernel/debug-monitors.c @@ -136,8 +136,6 @@ void disable_debug_monitors(enum debug_el el) */ static void clear_os_lock(void *unused) { - asm volatile("msr mdscr_el1, %0" : : "r" (0)); - isb(); asm volatile("msr oslar_el1, %0" : : "r" (0)); isb(); } diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S index f1d8b9b..a82ae88 100644 --- a/arch/arm64/mm/proc.S +++ b/arch/arm64/mm/proc.S @@ -119,8 +119,7 @@ ENTRY(__cpu_setup) mov x0, #3 << 20 msr cpacr_el1, x0 // Enable FP/ASIMD - mov x0, #1 - msr oslar_el1, x0 // Set the debug OS lock + msr mdscr_el1, xzr // Reset mdscr_el1 tlbi vmalle1is // invalidate I + D TLBs /* * Memory region attributes for LPAE: -- cgit v0.10.2 From 60e6726c7bdec7fedae278ee3bf973ba988f2abf Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 8 May 2013 21:34:48 +0200 Subject: cpufreq, ondemand: Remove leftover debug line I don't see how the virtual address of the tuners pointer would be of any help to anyone so remove it. Signed-off-by: Borislav Petkov Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index b0ffef9..4b9bb5d 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -547,7 +547,6 @@ static int od_init(struct dbs_data *dbs_data) tuners->io_is_busy = should_io_be_busy(); dbs_data->tuners = tuners; - pr_info("%s: tuners %p\n", __func__, tuners); mutex_init(&dbs_data->mutex); return 0; } -- cgit v0.10.2 From 0a438d5b381e2bdfd5e02d653bf46fcc878356e3 Mon Sep 17 00:00:00 2001 From: Hema Prathaban Date: Sat, 11 May 2013 22:39:47 +0530 Subject: staging: vt6656: use free_netdev instead of kfree use free_netdev() instead of kfree(pDevice->apdev) Signed-off-by: Hema Prathaban Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/vt6656/hostap.c b/drivers/staging/vt6656/hostap.c index f4f1bf7..c699a30 100644 --- a/drivers/staging/vt6656/hostap.c +++ b/drivers/staging/vt6656/hostap.c @@ -133,7 +133,7 @@ static int hostap_disable_hostapd(struct vnt_private *pDevice, int rtnl_locked) DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: Netdevice %s unregistered\n", pDevice->dev->name, pDevice->apdev->name); } - kfree(pDevice->apdev); + free_netdev(pDevice->apdev); pDevice->apdev = NULL; pDevice->bEnable8021x = false; pDevice->bEnableHostWEP = false; -- cgit v0.10.2 From 159c8cddd9259e9379f37f0a69ddcbb01c4e8b77 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 13 May 2013 21:37:26 +0800 Subject: hwmon: (iio_hwmon) Fix null pointer dereference This patch fixes the null pointer dereference in goto error_release_channels path when allocate memory for st fails. Reported-by: Dan Carpenter Signed-off-by: Axel Lin Signed-off-by: Guenter Roeck diff --git a/drivers/hwmon/iio_hwmon.c b/drivers/hwmon/iio_hwmon.c index 368497f..52b77af 100644 --- a/drivers/hwmon/iio_hwmon.c +++ b/drivers/hwmon/iio_hwmon.c @@ -161,7 +161,7 @@ static int iio_hwmon_probe(struct platform_device *pdev) error_remove_group: sysfs_remove_group(&dev->kobj, &st->attr_group); error_release_channels: - iio_channel_release_all(st->channels); + iio_channel_release_all(channels); return ret; } -- cgit v0.10.2 From e2555fde4159467fb579e6ae3c0a8fc33015d0f5 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 13 May 2013 09:45:01 -0400 Subject: jbd,jbd2: fix oops in jbd2_journal_put_journal_head() Commit ae4647fb (jbd2: reduce journal_head size) introduced a regression where we occasionally hit panic in jbd2_journal_put_journal_head() because of wrong b_jcount. The bug is caused by gcc making 64-bit access to 32-bit bitfield and thus clobbering b_jcount. At least for now, those 8 bytes saved in struct journal_head are not worth the trouble with gcc bitfield handling so revert that part of the patch. Reported-by: EUNBONG SONG Reported-by: Tony Luck Signed-off-by: Jan Kara Signed-off-by: "Theodore Ts'o" diff --git a/include/linux/journal-head.h b/include/linux/journal-head.h index 13a3da2..98cd41b 100644 --- a/include/linux/journal-head.h +++ b/include/linux/journal-head.h @@ -30,15 +30,19 @@ struct journal_head { /* * Journalling list for this buffer [jbd_lock_bh_state()] + * NOTE: We *cannot* combine this with b_modified into a bitfield + * as gcc would then (which the C standard allows but which is + * very unuseful) make 64-bit accesses to the bitfield and clobber + * b_jcount if its update races with bitfield modification. */ - unsigned b_jlist:4; + unsigned b_jlist; /* * This flag signals the buffer has been modified by * the currently running transaction * [jbd_lock_bh_state()] */ - unsigned b_modified:1; + unsigned b_modified; /* * Copy of the buffer data frozen for writing to the log. -- cgit v0.10.2 From a62ee234a572b4c98fe98cf5fb18e4e8b0f6e43d Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Sun, 12 May 2013 14:31:19 +0200 Subject: sound: Fix make allmodconfig on MIPS correctly Commit d4702b189c ("sound: Fix make allmodconfig on MIPS") added a (negative) dependency on ISA_DMA_SUPPORT_BROKEN. Since that Kconfig symbol doesn't exist, this dependency will always evaluate to true. Apparently GENERIC_ISA_DMA_SUPPORT_BROKEN was meant to be used here. Signed-off-by: Paul Bolle Signed-off-by: Takashi Iwai diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig index 51c4ba9..1a96402 100644 --- a/sound/oss/Kconfig +++ b/sound/oss/Kconfig @@ -250,7 +250,7 @@ config MSND_FIFOSIZE menuconfig SOUND_OSS tristate "OSS sound modules" depends on ISA_DMA_API && VIRT_TO_BUS - depends on !ISA_DMA_SUPPORT_BROKEN + depends on !GENERIC_ISA_DMA_SUPPORT_BROKEN help OSS is the Open Sound System suite of sound card drivers. They make sound programming easier since they provide a common API. Say Y or -- cgit v0.10.2 From ecacb0b17c08fae89f65468727f0e4b8e91da4e1 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 13 May 2013 14:01:43 +0800 Subject: hwmon: fix error return code in abituguru_probe() Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c index df0b699..2ebd6ce 100644 --- a/drivers/hwmon/abituguru.c +++ b/drivers/hwmon/abituguru.c @@ -1414,14 +1414,18 @@ static int abituguru_probe(struct platform_device *pdev) pr_info("found Abit uGuru\n"); /* Register sysfs hooks */ - for (i = 0; i < sysfs_attr_i; i++) - if (device_create_file(&pdev->dev, - &data->sysfs_attr[i].dev_attr)) + for (i = 0; i < sysfs_attr_i; i++) { + res = device_create_file(&pdev->dev, + &data->sysfs_attr[i].dev_attr); + if (res) goto abituguru_probe_error; - for (i = 0; i < ARRAY_SIZE(abituguru_sysfs_attr); i++) - if (device_create_file(&pdev->dev, - &abituguru_sysfs_attr[i].dev_attr)) + } + for (i = 0; i < ARRAY_SIZE(abituguru_sysfs_attr); i++) { + res = device_create_file(&pdev->dev, + &abituguru_sysfs_attr[i].dev_attr); + if (res) goto abituguru_probe_error; + } data->hwmon_dev = hwmon_device_register(&pdev->dev); if (!IS_ERR(data->hwmon_dev)) -- cgit v0.10.2 From be3cd268d1d1837aaed937c2fc85b3d39d2f1b50 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 9 Apr 2013 23:26:18 +0200 Subject: ARM: mvebu: do not duplicate the mpic alias The mpic alias is already defined in the common armada-370-xp.dtsi, so there's no need to repeat it at the armada-xp.dtsi and armada-370.dtsi level. Signed-off-by: Thomas Petazzoni Signed-off-by: Jason Cooper diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index b2c1b5a..0c9130b 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -43,7 +43,7 @@ wt-override; }; - mpic: interrupt-controller@20000 { + interrupt-controller@20000 { reg = <0x20a00 0x1d0>, <0x21870 0x58>; }; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index bacab11..5b902f9 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -31,7 +31,7 @@ wt-override; }; - mpic: interrupt-controller@20000 { + interrupt-controller@20000 { reg = <0x20a00 0x2d0>, <0x21070 0x58>; }; -- cgit v0.10.2 From 99e11334dcb846f9b76fb808196c7f47aa83abb3 Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Sun, 21 Apr 2013 17:14:00 +0100 Subject: Kirkwood: Enable PCIe port 1 on QNAP TS-11x/TS-21x Enable KW_PCIE1 on QNAP TS-11x/TS-21x devices as newer revisions (rev 1.3) have a USB 3.0 chip from Etron on PCIe port 1. Thanks to Marek Vasut for identifying this issue! Cc: # v2.6.36.x Signed-off-by: Martin Michlmayr Tested-by: Marek Vasut Acked-by: Andrew Lunn Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index 283abff..e1267d6 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -124,7 +124,7 @@ static void __init qnap_ts219_init(void) static int __init ts219_pci_init(void) { if (machine_is_ts219()) - kirkwood_pcie_init(KW_PCIE0); + kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0); return 0; } -- cgit v0.10.2 From 7c14068f5a08d57d5ea98ef3668218e654617095 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Fri, 10 May 2013 22:12:27 +0200 Subject: ARM: plat-orion: add missing ehci include to common.h Removing orion ehci include from board files will raise a compiler error because plat/common.h is using an enum provided by orion ehci but not including the include itself. This just adds the missing include. Signed-off-by: Sebastian Hesselbarth Signed-off-by: Jason Cooper diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h index e06fc5f..d9a24f6 100644 --- a/arch/arm/plat-orion/include/plat/common.h +++ b/arch/arm/plat-orion/include/plat/common.h @@ -10,6 +10,7 @@ #ifndef __PLAT_COMMON_H #include +#include struct dsa_platform_data; struct mv_sata_platform_data; -- cgit v0.10.2 From 1aa3d8d9935dfb459d64f06ccd828b56147fd971 Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Wed, 8 May 2013 11:59:01 +0000 Subject: xen/arm: initialize pm functions later If we are running in dom0, we have to wait for the arch specific code to complete the initialization in order for us to successfully reset the power_off and pm_restart functions. Signed-off-by: Stefano Stabellini diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index d30042e..83d13b0 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -272,12 +272,18 @@ static int __init xen_guest_init(void) if (!xen_initial_domain()) xenbus_probe(NULL); + return 0; +} +core_initcall(xen_guest_init); + +static int __init xen_pm_init(void) +{ pm_power_off = xen_power_off; arm_pm_restart = xen_restart; return 0; } -core_initcall(xen_guest_init); +subsys_initcall(xen_pm_init); static irqreturn_t xen_arm_callback(int irq, void *arg) { -- cgit v0.10.2 From d7266d7894b111dee9b081c05944533bc8780eca Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Wed, 8 May 2013 13:02:38 +0000 Subject: xen/arm: do not handle VCPUOP_register_vcpu_info failures We expect VCPUOP_register_vcpu_info to succeed, do not try to handle failures. Signed-off-by: Stefano Stabellini Acked-by: Ian Campbell diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 83d13b0..3dfa2b5 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -165,13 +165,9 @@ static int __init xen_secondary_init(unsigned int cpu) info.offset = offset_in_page(vcpup); err = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_info, cpu, &info); - if (err) { - pr_debug("register_vcpu_info failed: err=%d\n", err); - } else { - /* This cpu is using the registered vcpu info, even if - later ones fail to. */ - per_cpu(xen_vcpu, cpu) = vcpup; - } + BUG_ON(err); + per_cpu(xen_vcpu, cpu) = vcpup; + return 0; } -- cgit v0.10.2 From 3cc8e40e8ff8e232a9dd672da81beabd09f87366 Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Wed, 8 May 2013 11:59:01 +0000 Subject: xen/arm: rename xen_secondary_init and run it on every online cpu Rename xen_secondary_init to xen_percpu_init. Run xen_percpu_init on the each online cpu, reuse the current on_each_cpu call. Merge xen_percpu_enable_events into xen_percpu_init. Signed-off-by: Stefano Stabellini diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 3dfa2b5..13609e0 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -152,11 +152,12 @@ int xen_unmap_domain_mfn_range(struct vm_area_struct *vma, } EXPORT_SYMBOL_GPL(xen_unmap_domain_mfn_range); -static int __init xen_secondary_init(unsigned int cpu) +static void __init xen_percpu_init(void *unused) { struct vcpu_register_vcpu_info info; struct vcpu_info *vcpup; int err; + int cpu = get_cpu(); pr_info("Xen: initializing cpu%d\n", cpu); vcpup = per_cpu_ptr(xen_vcpu_info, cpu); @@ -168,7 +169,7 @@ static int __init xen_secondary_init(unsigned int cpu) BUG_ON(err); per_cpu(xen_vcpu, cpu) = vcpup; - return 0; + enable_percpu_irq(xen_events_irq, 0); } static void xen_restart(char str, const char *cmd) @@ -204,7 +205,6 @@ static int __init xen_guest_init(void) const char *version = NULL; const char *xen_prefix = "xen,xen-"; struct resource res; - int i; node = of_find_compatible_node(NULL, NULL, "xen,xen"); if (!node) { @@ -261,8 +261,6 @@ static int __init xen_guest_init(void) sizeof(struct vcpu_info)); if (xen_vcpu_info == NULL) return -ENOMEM; - for_each_online_cpu(i) - xen_secondary_init(i); gnttab_init(); if (!xen_initial_domain()) @@ -287,11 +285,6 @@ static irqreturn_t xen_arm_callback(int irq, void *arg) return IRQ_HANDLED; } -static __init void xen_percpu_enable_events(void *unused) -{ - enable_percpu_irq(xen_events_irq, 0); -} - static int __init xen_init_events(void) { if (!xen_domain() || xen_events_irq < 0) @@ -305,7 +298,7 @@ static int __init xen_init_events(void) return -EINVAL; } - on_each_cpu(xen_percpu_enable_events, NULL, 0); + on_each_cpu(xen_percpu_init, NULL, 0); return 0; } -- cgit v0.10.2 From 00ed4a0bd964555fe9276f2299564c384d50ae7d Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Mon, 13 May 2013 12:22:53 -0300 Subject: ARM: mvebu: Add a ranges entry to translate devbus childs With the latest device tree reorganization which introduced the 'internal-reg' node, now the only region translated is the internal register's. This makes the description of the hardware incomplete, for it lacks the Device Bus childs address space. In order to fix this, it's required to add a 'ranges' entry with a suitable address space to map Device Bus childs, on a per-board basis. Signed-off-by: Ezequiel Garcia Signed-off-by: Jason Cooper diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index f14d36c..46b7850 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -27,6 +27,9 @@ }; soc { + ranges = <0 0 0xd0000000 0x100000 + 0xf0000000 0 0xf0000000 0x8000000>; + internal-regs { serial@12000 { clock-frequency = <250000000>; -- cgit v0.10.2 From c10ebbf55b40503a46fb8b29824c9ca1ca089826 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Thu, 9 May 2013 14:56:32 -0500 Subject: libceph: init sent and completed when starting The rbd code has a need to be able to restart an osd request that has already been started and completed once before. This currently wouldn't work right because the osd client code assumes an osd request will be started exactly once Certain fields in a request are never cleared and this leads to trouble if you try to reuse it. Specifically, the r_sent, r_got_reply, and r_completed fields are never cleared. The r_sent field records the osd incarnation at the time the request was sent to that osd. If that's non-zero, the message won't get re-mapped to a target osd properly, and won't be put on the unsafe requests list the first time it's sent as it should. The r_got_reply field is used in handle_reply() to ensure the reply to a request is processed only once. And the r_completed field is used for lingering requests to avoid calling the callback function every time the osd client re-sends the request on behalf of its initiator. Each osd request passes through ceph_osdc_start_request() when responsibility for the request is handed over to the osd client for completion. We can safely zero these three fields there each time a request gets started. One last related change--clear the r_linger flag when a request is no longer registered as a linger request. This resolves: http://tracker.ceph.com/issues/5026 Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c index a3395fd..d5953b8 100644 --- a/net/ceph/osd_client.c +++ b/net/ceph/osd_client.c @@ -1204,6 +1204,7 @@ void ceph_osdc_unregister_linger_request(struct ceph_osd_client *osdc, mutex_lock(&osdc->request_mutex); if (req->r_linger) { __unregister_linger_request(osdc, req); + req->r_linger = 0; ceph_osdc_put_request(req); } mutex_unlock(&osdc->request_mutex); @@ -2120,7 +2121,9 @@ int ceph_osdc_start_request(struct ceph_osd_client *osdc, down_read(&osdc->map_sem); mutex_lock(&osdc->request_mutex); __register_request(osdc, req); - WARN_ON(req->r_sent); + req->r_sent = 0; + req->r_got_reply = 0; + req->r_completed = 0; rc = __map_request(osdc, req, 0); if (rc < 0) { if (nofail) { -- cgit v0.10.2 From ebda6408f2227a774343c3cc2861384942143ff3 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Fri, 10 May 2013 16:29:22 -0500 Subject: rbd: fix parent request size assumption The code that reads object data from the parent for a copyup on write request currently assumes that the size of that request is the size of a "full" object from the original target image. That is not necessarily the case. The parent overlap could reduce the request size below that. To fix that assumption we need to record the number of pages in the copyup_pages array, for both an image request and an object request. Rename a local variable in rbd_img_obj_parent_read_full_callback() to reflect we're recording the length of the parent read request, not the size of the target object. This resolves: http://tracker.ceph.com/issues/5038 Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 51c45e7..597b9bb 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -224,6 +224,7 @@ struct rbd_obj_request { }; }; struct page **copyup_pages; + u32 copyup_page_count; struct ceph_osd_request *osd_req; @@ -256,6 +257,7 @@ struct rbd_img_request { struct rbd_obj_request *obj_request; /* obj req initiator */ }; struct page **copyup_pages; + u32 copyup_page_count; spinlock_t completion_lock;/* protects next_completion */ u32 next_completion; rbd_img_callback_t callback; @@ -2119,7 +2121,7 @@ rbd_img_obj_copyup_callback(struct rbd_obj_request *obj_request) { struct rbd_img_request *img_request; struct rbd_device *rbd_dev; - u64 length; + struct page **pages; u32 page_count; rbd_assert(obj_request->type == OBJ_REQUEST_BIO); @@ -2129,12 +2131,14 @@ rbd_img_obj_copyup_callback(struct rbd_obj_request *obj_request) rbd_dev = img_request->rbd_dev; rbd_assert(rbd_dev); - length = (u64)1 << rbd_dev->header.obj_order; - page_count = (u32)calc_pages_for(0, length); - rbd_assert(obj_request->copyup_pages); - ceph_release_page_vector(obj_request->copyup_pages, page_count); + pages = obj_request->copyup_pages; + rbd_assert(pages != NULL); obj_request->copyup_pages = NULL; + page_count = obj_request->copyup_page_count; + rbd_assert(page_count); + obj_request->copyup_page_count = 0; + ceph_release_page_vector(pages, page_count); /* * We want the transfer count to reflect the size of the @@ -2158,9 +2162,9 @@ rbd_img_obj_parent_read_full_callback(struct rbd_img_request *img_request) struct ceph_osd_client *osdc; struct rbd_device *rbd_dev; struct page **pages; + u32 page_count; int result; - u64 obj_size; - u64 xferred; + u64 parent_length; rbd_assert(img_request_child_test(img_request)); @@ -2169,19 +2173,21 @@ rbd_img_obj_parent_read_full_callback(struct rbd_img_request *img_request) pages = img_request->copyup_pages; rbd_assert(pages != NULL); img_request->copyup_pages = NULL; + page_count = img_request->copyup_page_count; + rbd_assert(page_count); + img_request->copyup_page_count = 0; orig_request = img_request->obj_request; rbd_assert(orig_request != NULL); rbd_assert(orig_request->type == OBJ_REQUEST_BIO); result = img_request->result; - obj_size = img_request->length; - xferred = img_request->xferred; + parent_length = img_request->length; + rbd_assert(parent_length == img_request->xferred); rbd_img_request_put(img_request); rbd_assert(orig_request->img_request); rbd_dev = orig_request->img_request->rbd_dev; rbd_assert(rbd_dev); - rbd_assert(obj_size == (u64)1 << rbd_dev->header.obj_order); if (result) goto out_err; @@ -2195,11 +2201,12 @@ rbd_img_obj_parent_read_full_callback(struct rbd_img_request *img_request) goto out_err; orig_request->osd_req = osd_req; orig_request->copyup_pages = pages; + orig_request->copyup_page_count = page_count; /* Initialize the copyup op */ osd_req_op_cls_init(osd_req, 0, CEPH_OSD_OP_CALL, "rbd", "copyup"); - osd_req_op_cls_request_data_pages(osd_req, 0, pages, obj_size, 0, + osd_req_op_cls_request_data_pages(osd_req, 0, pages, parent_length, 0, false, false); /* Then the original write request op */ @@ -2312,6 +2319,7 @@ static int rbd_img_obj_parent_read_full(struct rbd_obj_request *obj_request) if (result) goto out_err; parent_request->copyup_pages = pages; + parent_request->copyup_page_count = page_count; parent_request->callback = rbd_img_obj_parent_read_full_callback; result = rbd_img_request_submit(parent_request); @@ -2319,6 +2327,7 @@ static int rbd_img_obj_parent_read_full(struct rbd_obj_request *obj_request) return 0; parent_request->copyup_pages = NULL; + parent_request->copyup_page_count = 0; parent_request->obj_request = NULL; rbd_obj_request_put(obj_request); out_err: -- cgit v0.10.2 From 3fab70c165795431f00ddf9be8b84ddd07bd1f8f Mon Sep 17 00:00:00 2001 From: Lingzhu Xiang Date: Fri, 10 May 2013 18:29:21 +0800 Subject: efivarfs: Never return ENOENT from firmware again Previously in 1fa7e69 efi_status_to_err() translated firmware status EFI_NOT_FOUND to -EIO instead of -ENOENT for efivarfs operations to avoid confusion. After refactoring in e14ab23, it is also used in other places where the translation may be unnecessary. So move the translation to efivarfs specific code. Also return EOF for reading zero-length files, which is what users would expect. Cc: Josh Boyer Cc: Jeremy Kerr Cc: Lee, Chun-Yi Cc: Andy Whitcroft Signed-off-by: Lingzhu Xiang Signed-off-by: Matt Fleming diff --git a/fs/efivarfs/file.c b/fs/efivarfs/file.c index bfb5315..8dd524f 100644 --- a/fs/efivarfs/file.c +++ b/fs/efivarfs/file.c @@ -44,8 +44,11 @@ static ssize_t efivarfs_file_write(struct file *file, bytes = efivar_entry_set_get_size(var, attributes, &datasize, data, &set); - if (!set && bytes) + if (!set && bytes) { + if (bytes == -ENOENT) + bytes = -EIO; goto out; + } if (bytes == -ENOENT) { drop_nlink(inode); @@ -76,7 +79,14 @@ static ssize_t efivarfs_file_read(struct file *file, char __user *userbuf, int err; err = efivar_entry_size(var, &datasize); - if (err) + + /* + * efivarfs represents uncommitted variables with + * zero-length files. Reading them should return EOF. + */ + if (err == -ENOENT) + return 0; + else if (err) return err; data = kmalloc(datasize + sizeof(attributes), GFP_KERNEL); -- cgit v0.10.2 From b91f09f17b2a302f07022e2f766969e2536d71b3 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Fri, 10 May 2013 16:29:22 -0500 Subject: rbd: support reading parent page data for writes Currently, rbd_img_obj_parent_read_full() assumes the incoming object request contains bio data. But if a layered image is part of a multi-layer stack of images it will result in read requests of page data to parent images. This is handling the same kind of issue as was resolved by this commit: 5b2ab72d rbd: support reading parent page data This resolves: http://tracker.ceph.com/issues/5027 Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 597b9bb..5161e80 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -2165,6 +2165,8 @@ rbd_img_obj_parent_read_full_callback(struct rbd_img_request *img_request) u32 page_count; int result; u64 parent_length; + u64 offset; + u64 length; rbd_assert(img_request_child_test(img_request)); @@ -2179,7 +2181,7 @@ rbd_img_obj_parent_read_full_callback(struct rbd_img_request *img_request) orig_request = img_request->obj_request; rbd_assert(orig_request != NULL); - rbd_assert(orig_request->type == OBJ_REQUEST_BIO); + rbd_assert(obj_request_type_valid(orig_request->type)); result = img_request->result; parent_length = img_request->length; rbd_assert(parent_length == img_request->xferred); @@ -2211,11 +2213,17 @@ rbd_img_obj_parent_read_full_callback(struct rbd_img_request *img_request) /* Then the original write request op */ + offset = orig_request->offset; + length = orig_request->length; osd_req_op_extent_init(osd_req, 1, CEPH_OSD_OP_WRITE, - orig_request->offset, - orig_request->length, 0, 0); - osd_req_op_extent_osd_data_bio(osd_req, 1, orig_request->bio_list, - orig_request->length); + offset, length, 0, 0); + if (orig_request->type == OBJ_REQUEST_BIO) + osd_req_op_extent_osd_data_bio(osd_req, 1, + orig_request->bio_list, length); + else + osd_req_op_extent_osd_data_pages(osd_req, 1, + orig_request->pages, length, + offset & ~PAGE_MASK, false, false); rbd_osd_req_format_write(orig_request); @@ -2261,7 +2269,7 @@ static int rbd_img_obj_parent_read_full(struct rbd_obj_request *obj_request) int result; rbd_assert(obj_request_img_data_test(obj_request)); - rbd_assert(obj_request->type == OBJ_REQUEST_BIO); + rbd_assert(obj_request_type_valid(obj_request->type)); img_request = obj_request->img_request; rbd_assert(img_request != NULL); -- cgit v0.10.2 From 70cf49cfc7a4d1eb4aeea6cd128b88230be9d0b1 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 17:40:33 -0500 Subject: rbd: ignore zero-overlap parent An rbd clone image that has an overlap with its parent of 0 is effectively not a layered image at all. Detect this case and treat such an image as non-layered. Issue a warning to be sure the user knows what's going on. This resolves: http://tracker.ceph.com/issues/5028 Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 5161e80..b67ecda 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -3665,9 +3665,13 @@ static int rbd_dev_v2_parent_info(struct rbd_device *rbd_dev) ceph_decode_64_safe(&p, end, parent_spec->snap_id, out_err); ceph_decode_64_safe(&p, end, overlap, out_err); - rbd_dev->parent_overlap = overlap; - rbd_dev->parent_spec = parent_spec; - parent_spec = NULL; /* rbd_dev now owns this */ + if (overlap) { + rbd_dev->parent_spec = parent_spec; + parent_spec = NULL; /* rbd_dev now owns this */ + rbd_dev->parent_overlap = overlap; + } else { + rbd_warn(rbd_dev, "ignoring parent of clone with overlap 0\n"); + } out: ret = 0; out_err: -- cgit v0.10.2 From d51df2c5d3c1f2c639708fc644ed67296bb51dc5 Mon Sep 17 00:00:00 2001 From: Seiji Aguchi Date: Fri, 10 May 2013 20:45:36 +0000 Subject: efivar: fix oops in efivar_update_sysfs_entries() caused by memory reuse The loop in efivar_update_sysfs_entries() reuses the same allocation for entries each time it calls efivar_create_sysfs_entry(entry). This is wrong because efivar_create_sysfs_entry() expects to keep the memory it was passed, so the caller may not free it (and may not pass the same memory in multiple times). This leads to the oops below. Fix by getting a new allocation each time we go around the loop. ---[ end trace ba4907d5c519d111 ]--- BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] efivar_entry_find+0x14f/0x2d0 PGD 0 Oops: 0000 [#2] SMP Modules linked in: oops(OF+) ebtable_nat ebtables xt_CHECKSUM [...] CPU: 0 PID: 301 Comm: kworker/0:2 Tainted: GF D O 3.9.0+ #1 Hardware name: LENOVO 4291EV7/4291EV7, BIOS 8DET52WW (1.22 ) 09/15/2011 Workqueue: events efivar_update_sysfs_entries task: ffff8801955920c0 ti: ffff88019413e000 task.ti: ffff88019413e000 RIP: 0010:[] [] efivar_entry_find+0x14f/0x2d0 RSP: 0018:ffff88019413fa48 EFLAGS: 00010006 RAX: 0000000000000000 RBX: ffff880195d87c00 RCX: ffffffff81ab6f60 RDX: ffff88019413fb88 RSI: 0000000000000400 RDI: ffff880196254000 RBP: ffff88019413fbd8 R08: 0000000000000000 R09: ffff8800dad99037 R10: ffff880195d87c00 R11: 0000000000000430 R12: ffffffff81ab6f60 R13: fffffffffffff7d8 R14: ffff880196254000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88019e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000001a0b000 CR4: 00000000000407f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff88019413fb78 ffff88019413fb88 ffffffff81e85d60 03000000972b5c00 ffff88019413fa29 ffffffff81e85d60 ffff88019413fbfb 0000000197087280 00000000000000fe 0000000000000001 ffffffff81e85dd9 ffff880197087280 Call Trace: [] ? idr_get_empty_slot+0x131/0x240 [] ? put_dec+0x72/0x90 [] ? cache_alloc_refill+0x170/0x2f0 [] efivar_update_sysfs_entry+0x150/0x220 [] ? efi_call2+0x9/0x70 [] ? virt_efi_get_next_variable+0x47/0x1b0 [] ? kmem_cache_alloc_trace+0x1af/0x1c0 [] efivar_init+0x2c3/0x380 [] ? efivar_delete+0xd0/0xd0 [] efivar_update_sysfs_entries+0x6f/0x90 [] process_one_work+0x183/0x490 [] worker_thread+0x120/0x3a0 [] ? manage_workers+0x160/0x160 [] kthread+0xce/0xe0 [] ? kthread_freezable_should_stop+0x70/0x70 [] ret_from_fork+0x7c/0xb0 [] ? kthread_freezable_should_stop+0x70/0x70 Code: 8d 55 b0 48 8d 45 a0 49 81 ed 28 08 00 00 48 89 95 78 fe [...] RIP [] efivar_entry_find+0x14f/0x2d0 RSP CR2: 0000000000000000 ---[ end trace ba4907d5c519d112 ]--- Cc: James Bottomley Cc: Tomoki Sekiyama Signed-off-by: Seiji Aguchi Signed-off-by: Matt Fleming diff --git a/drivers/firmware/efi/efivars.c b/drivers/firmware/efi/efivars.c index b623c59..8bd1bb6 100644 --- a/drivers/firmware/efi/efivars.c +++ b/drivers/firmware/efi/efivars.c @@ -523,13 +523,11 @@ static void efivar_update_sysfs_entries(struct work_struct *work) struct efivar_entry *entry; int err; - entry = kzalloc(sizeof(*entry), GFP_KERNEL); - if (!entry) - return; - /* Add new sysfs entries */ while (1) { - memset(entry, 0, sizeof(*entry)); + entry = kzalloc(sizeof(*entry), GFP_KERNEL); + if (!entry) + return; err = efivar_init(efivar_update_sysfs_entry, entry, true, false, &efivar_sysfs_list); -- cgit v0.10.2 From 352a2d5bfc336d980af69cb0ed24f86d9026f377 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Mon, 15 Apr 2013 13:06:54 -0500 Subject: gpio/omap: ensure gpio context is initialised Commit a2797be (gpio/omap: force restore if context loss is not detectable) broke gpio support for OMAP when booting with device-tree because a restore of the gpio context being performed without ever initialising the gpio context. In other words, the context restored was bad. This problem could also occur in the non device-tree case, however, it is much less likely because when booting without device-tree we can detect context loss via a platform specific API and so context restore is performed less often. Nevertheless we should ensure that the gpio context is initialised on the first pm-runtime resume for gpio banks that could lose their state regardless of whether we are booting with device-tree or not. The context loss count was being initialised on the first pm-runtime suspend following a resume, by populating the get_count_loss_count() function pointer after the first pm-runtime resume. To make the code more readable and logical, initialise the context loss count on the first pm-runtime resume if the context is not yet valid. Reported-by: Tony Lindgren Signed-off-by: Jon Hunter Acked-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Tony Lindgren Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 2050891..d3f7d2d 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -69,6 +69,7 @@ struct gpio_bank { bool is_mpuio; bool dbck_flag; bool loses_context; + bool context_valid; int stride; u32 width; int context_loss_count; @@ -1128,6 +1129,10 @@ static int omap_gpio_probe(struct platform_device *pdev) bank->loses_context = true; } else { bank->loses_context = pdata->loses_context; + + if (bank->loses_context) + bank->get_context_loss_count = + pdata->get_context_loss_count; } @@ -1178,9 +1183,6 @@ static int omap_gpio_probe(struct platform_device *pdev) omap_gpio_chip_init(bank); omap_gpio_show_rev(bank); - if (bank->loses_context) - bank->get_context_loss_count = pdata->get_context_loss_count; - pm_runtime_put(bank->dev); list_add_tail(&bank->node, &omap_gpio_list); @@ -1259,6 +1261,8 @@ update_gpio_context_count: return 0; } +static void omap_gpio_init_context(struct gpio_bank *p); + static int omap_gpio_runtime_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -1268,6 +1272,20 @@ static int omap_gpio_runtime_resume(struct device *dev) int c; spin_lock_irqsave(&bank->lock, flags); + + /* + * On the first resume during the probe, the context has not + * been initialised and so initialise it now. Also initialise + * the context loss count. + */ + if (bank->loses_context && !bank->context_valid) { + omap_gpio_init_context(bank); + + if (bank->get_context_loss_count) + bank->context_loss_count = + bank->get_context_loss_count(bank->dev); + } + _gpio_dbck_enable(bank); /* @@ -1384,6 +1402,29 @@ void omap2_gpio_resume_after_idle(void) } #if defined(CONFIG_PM_RUNTIME) +static void omap_gpio_init_context(struct gpio_bank *p) +{ + struct omap_gpio_reg_offs *regs = p->regs; + void __iomem *base = p->base; + + p->context.ctrl = __raw_readl(base + regs->ctrl); + p->context.oe = __raw_readl(base + regs->direction); + p->context.wake_en = __raw_readl(base + regs->wkup_en); + p->context.leveldetect0 = __raw_readl(base + regs->leveldetect0); + p->context.leveldetect1 = __raw_readl(base + regs->leveldetect1); + p->context.risingdetect = __raw_readl(base + regs->risingdetect); + p->context.fallingdetect = __raw_readl(base + regs->fallingdetect); + p->context.irqenable1 = __raw_readl(base + regs->irqenable); + p->context.irqenable2 = __raw_readl(base + regs->irqenable2); + + if (regs->set_dataout && p->regs->clr_dataout) + p->context.dataout = __raw_readl(base + regs->set_dataout); + else + p->context.dataout = __raw_readl(base + regs->dataout); + + p->context_valid = true; +} + static void omap_gpio_restore_context(struct gpio_bank *bank) { __raw_writel(bank->context.wake_en, @@ -1421,6 +1462,7 @@ static void omap_gpio_restore_context(struct gpio_bank *bank) #else #define omap_gpio_runtime_suspend NULL #define omap_gpio_runtime_resume NULL +static void omap_gpio_init_context(struct gpio_bank *p) {} #endif static const struct dev_pm_ops gpio_pm_ops = { -- cgit v0.10.2 From 6d31727a0b6fe7206725c93508e6d2065f16ff03 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Mon, 13 May 2013 19:32:14 +0000 Subject: ARM: Orion: Remove redundant init_dma_coherent_pool_size() The patch: 387870f mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls makes these calls on Kirkwood and Orion5x redundant. The drivers are not making atomic requests for coherent memory and hence the default pool size is now sufficient. Jason Cooper added mach-mvebu/ hunk, and corrected minor typos in commit message. Signed-off-by: Andrew Lunn Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index c2cae69..f389228 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -528,12 +528,6 @@ void __init kirkwood_init_early(void) { orion_time_set_base(TIMER_VIRT_BASE); - /* - * Some Kirkwood devices allocate their coherent buffers from atomic - * context. Increase size of atomic coherent pool to make sure such - * the allocations won't fail. - */ - init_dma_coherent_pool_size(SZ_1M); mvebu_mbus_init("marvell,kirkwood-mbus", BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ); diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c index 42a4cb3..1c48890 100644 --- a/arch/arm/mach-mvebu/armada-370-xp.c +++ b/arch/arm/mach-mvebu/armada-370-xp.c @@ -54,13 +54,6 @@ void __init armada_370_xp_init_early(void) char *mbus_soc_name; /* - * Some Armada 370/XP devices allocate their coherent buffers - * from atomic context. Increase size of atomic coherent pool - * to make sure such the allocations won't fail. - */ - init_dma_coherent_pool_size(SZ_1M); - - /* * This initialization will be replaced by a DT-based * initialization once the mvebu-mbus driver gains DT support. */ diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index b97fd67..f8a6db9 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -199,13 +199,6 @@ void __init orion5x_init_early(void) orion_time_set_base(TIMER_VIRT_BASE); - /* - * Some Orion5x devices allocate their coherent buffers from atomic - * context. Increase size of atomic coherent pool to make sure such - * the allocations won't fail. - */ - init_dma_coherent_pool_size(SZ_1M); - /* Initialize the MBUS driver */ orion5x_pcie_id(&dev, &rev); if (dev == MV88F5281_DEV_ID) -- cgit v0.10.2 From ef38079401c03fab7e0eb72085635c841b9b8ee7 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Sat, 11 May 2013 09:15:37 +0000 Subject: qlge: fix dma map leak when the last chunk is not allocated qlge allocates chunks from a page that it maps and unmaps that page when the last chunk is released. When the driver is unloaded or the card is removed, all chunks are released and the page is unmapped for the last chunk. However, when the last chunk of a page is not allocated and the device is removed, that page is not unmapped. In fact, its last reference is not put and there's also a page leak. This bug prevents a device from being properly hotplugged. When the DMA API debug option is enabled, the following messages show the pending DMA allocation after we remove the driver. This patch fixes the bug by unmapping and putting the page from the ring if its last chunk has not been allocated. pci 0005:98:00.0: DMA-API: device driver has pending DMA allocations while released from device [count=1] One of leaked entries details: [device address=0x0000000060a80000] [size=65536 bytes] [mapped with DMA_FROM_DEVICE] [mapped as page] ------------[ cut here ]------------ WARNING: at lib/dma-debug.c:746 Modules linked in: qlge(-) rpadlpar_io rpaphp pci_hotplug fuse [last unloaded: qlge] NIP: c0000000003fc3ec LR: c0000000003fc3e8 CTR: c00000000054de60 REGS: c0000003ee9c74e0 TRAP: 0700 Tainted: G O (3.7.2) MSR: 8000000000029032 CR: 28002424 XER: 00000001 SOFTE: 1 CFAR: c0000000007a39c8 TASK = c0000003ee8d5c90[8406] 'rmmod' THREAD: c0000003ee9c4000 CPU: 31 GPR00: c0000000003fc3e8 c0000003ee9c7760 c000000000c789f8 00000000000000ee GPR04: 0000000000000000 00000000000000ef 0000000000004000 0000000000010000 GPR08: 00000000000000be c000000000b22088 c000000000c4c218 00000000007c0000 GPR12: 0000000028002422 c00000000ff26c80 0000000000000000 000001001b0f1b40 GPR16: 00000000100cb9d8 0000000010093088 c000000000cdf910 0000000000000001 GPR20: 0000000000000000 c000000000dbfc00 0000000000000000 c000000000dbfb80 GPR24: c0000003fafc9d80 0000000000000001 000000000001ff80 c0000003f38f7888 GPR28: c000000000ddfc00 0000000000000400 c000000000bd7790 c000000000ddfb80 NIP [c0000000003fc3ec] .dma_debug_device_change+0x22c/0x2b0 LR [c0000000003fc3e8] .dma_debug_device_change+0x228/0x2b0 Call Trace: [c0000003ee9c7760] [c0000000003fc3e8] .dma_debug_device_change+0x228/0x2b0 (unreliable) [c0000003ee9c7840] [c00000000079a098] .notifier_call_chain+0x78/0xf0 [c0000003ee9c78e0] [c0000000000acc20] .__blocking_notifier_call_chain+0x70/0xb0 [c0000003ee9c7990] [c0000000004a9580] .__device_release_driver+0x100/0x140 [c0000003ee9c7a20] [c0000000004a9708] .driver_detach+0x148/0x150 [c0000003ee9c7ac0] [c0000000004a8144] .bus_remove_driver+0xc4/0x150 [c0000003ee9c7b60] [c0000000004aa58c] .driver_unregister+0x8c/0xe0 [c0000003ee9c7bf0] [c0000000004090b4] .pci_unregister_driver+0x34/0xf0 [c0000003ee9c7ca0] [d000000002231194] .qlge_exit+0x1c/0x34 [qlge] [c0000003ee9c7d20] [c0000000000e36d8] .SyS_delete_module+0x1e8/0x290 [c0000003ee9c7e30] [c0000000000098d4] syscall_exit+0x0/0x94 Instruction dump: 7f26cb78 e818003a e87e81a0 e8f80028 e9180030 796b1f24 78001f24 7d6a5a14 7d2a002a e94b0020 483a7595 60000000 <0fe00000> 2fb80000 40de0048 80120050 ---[ end trace 4294f9abdb01031d ]--- Mapped at: [] .ql_update_lbq+0x384/0x580 [qlge] [] .ql_clean_inbound_rx_ring+0x300/0xc60 [qlge] [] .ql_napi_poll_msix+0x39c/0x5a0 [qlge] [] .net_rx_action+0x170/0x300 [] .__do_softirq+0x170/0x300 Signed-off-by: Thadeu Lima de Souza Cascardo Acked-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_main.c b/drivers/net/ethernet/qlogic/qlge/qlge_main.c index 87463bc..50235d2 100644 --- a/drivers/net/ethernet/qlogic/qlge/qlge_main.c +++ b/drivers/net/ethernet/qlogic/qlge/qlge_main.c @@ -1106,6 +1106,7 @@ static int ql_get_next_chunk(struct ql_adapter *qdev, struct rx_ring *rx_ring, if (pci_dma_mapping_error(qdev->pdev, map)) { __free_pages(rx_ring->pg_chunk.page, qdev->lbq_buf_order); + rx_ring->pg_chunk.page = NULL; netif_err(qdev, drv, qdev->ndev, "PCI mapping failed.\n"); return -ENOMEM; @@ -2777,6 +2778,12 @@ static void ql_free_lbq_buffers(struct ql_adapter *qdev, struct rx_ring *rx_ring curr_idx = 0; } + if (rx_ring->pg_chunk.page) { + pci_unmap_page(qdev->pdev, rx_ring->pg_chunk.map, + ql_lbq_block_size(qdev), PCI_DMA_FROMDEVICE); + put_page(rx_ring->pg_chunk.page); + rx_ring->pg_chunk.page = NULL; + } } static void ql_free_sbq_buffers(struct ql_adapter *qdev, struct rx_ring *rx_ring) -- cgit v0.10.2 From ba21fc696dd28ea7a5880345faf0168619a478d2 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 13 May 2013 04:26:06 +0000 Subject: bna: add missing iounmap() on error in bnad_init() Add the missing iounmap() before return from bnad_init() in the error handling case. Introduced by commit 01b54b1451853593739816a392485c4e2bee7dda (bna: tx rx cleanup fix). Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/brocade/bna/bnad.c b/drivers/net/ethernet/brocade/bna/bnad.c index ce4a030..07f7ef0 100644 --- a/drivers/net/ethernet/brocade/bna/bnad.c +++ b/drivers/net/ethernet/brocade/bna/bnad.c @@ -3236,9 +3236,10 @@ bnad_init(struct bnad *bnad, sprintf(bnad->wq_name, "%s_wq_%d", BNAD_NAME, bnad->id); bnad->work_q = create_singlethread_workqueue(bnad->wq_name); - - if (!bnad->work_q) + if (!bnad->work_q) { + iounmap(bnad->bar0); return -ENOMEM; + } return 0; } -- cgit v0.10.2 From 642a25375f4c863607d2170f4471aec8becf7788 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 17:40:33 -0500 Subject: rbd: get parent info on refresh Get parent info for format 2 images on every refresh (rather than just during the initial probe). This will be needed to detect the disappearance of the parent image in the event a mapped image becomes unlayered (i.e., flattened). Avoid leaking the previous parent spec on the second and subsequent times this information is requested by dropping the previous one (if any) before updating it. (Also, extract the pool id into a local variable before assigning it into the parent spec.) Switch to using a non-zero parent overlap value rather than the existence of a parent (a non-null parent_spec pointer) to determine whether to mark a request layered. It will soon be possible for a layered image to become unlayered while a request is in flight. This means that the layered flag for an image request indicates that there was a non-zero parent overlap at the time the image request was created. The parent overlap can change thereafter, which may lead to special handling at request submission or completion time. This and the next several patches are related to: http://tracker.ceph.com/issues/3763 NOTE: If an error occurs while refreshing the parent info (i.e., requesting it after initial probe), the old parent info will persist. This is not really correct, and is a scenario that needs to be addressed. For now we'll assert that the failure mode is unlikely, but the issue has been documented in tracker issue 5040. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index b67ecda..fcef63c 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -1873,7 +1873,7 @@ static struct rbd_img_request *rbd_img_request_create( } if (child_request) img_request_child_set(img_request); - if (rbd_dev->parent_spec) + if (rbd_dev->parent_overlap) img_request_layered_set(img_request); spin_lock_init(&img_request->completion_lock); img_request->next_completion = 0; @@ -3613,6 +3613,7 @@ static int rbd_dev_v2_parent_info(struct rbd_device *rbd_dev) __le64 snapid; void *p; void *end; + u64 pool_id; char *image_id; u64 overlap; int ret; @@ -3643,18 +3644,19 @@ static int rbd_dev_v2_parent_info(struct rbd_device *rbd_dev) p = reply_buf; end = reply_buf + ret; ret = -ERANGE; - ceph_decode_64_safe(&p, end, parent_spec->pool_id, out_err); - if (parent_spec->pool_id == CEPH_NOPOOL) + ceph_decode_64_safe(&p, end, pool_id, out_err); + if (pool_id == CEPH_NOPOOL) goto out; /* No parent? No problem. */ /* The ceph file layout needs to fit pool id in 32 bits */ ret = -EIO; - if (parent_spec->pool_id > (u64)U32_MAX) { + if (pool_id > (u64)U32_MAX) { rbd_warn(NULL, "parent pool id too large (%llu > %u)\n", - (unsigned long long)parent_spec->pool_id, U32_MAX); + (unsigned long long)pool_id, U32_MAX); goto out_err; } + parent_spec->pool_id = pool_id; image_id = ceph_extract_encoded_string(&p, end, NULL, GFP_KERNEL); if (IS_ERR(image_id)) { @@ -3666,6 +3668,7 @@ static int rbd_dev_v2_parent_info(struct rbd_device *rbd_dev) ceph_decode_64_safe(&p, end, overlap, out_err); if (overlap) { + rbd_spec_put(rbd_dev->parent_spec); rbd_dev->parent_spec = parent_spec; parent_spec = NULL; /* rbd_dev now owns this */ rbd_dev->parent_overlap = overlap; @@ -4034,17 +4037,43 @@ static int rbd_dev_v2_header_info(struct rbd_device *rbd_dev) goto out; } + /* + * If the image supports layering, get the parent info. We + * need to probe the first time regardless. Thereafter we + * only need to if there's a parent, to see if it has + * disappeared due to the mapped image getting flattened. + */ + if (rbd_dev->header.features & RBD_FEATURE_LAYERING && + (first_time || rbd_dev->parent_spec)) { + bool warn; + + ret = rbd_dev_v2_parent_info(rbd_dev); + if (ret) + goto out; + + /* + * Print a warning if this is the initial probe and + * the image has a parent. Don't print it if the + * image now being probed is itself a parent. We + * can tell at this point because we won't know its + * pool name yet (just its pool id). + */ + warn = rbd_dev->parent_spec && rbd_dev->spec->pool_name; + if (first_time && warn) + rbd_warn(rbd_dev, "WARNING: kernel layering " + "is EXPERIMENTAL!"); + } + ret = rbd_dev_v2_image_size(rbd_dev); if (ret) goto out; + if (rbd_dev->spec->snap_id == CEPH_NOSNAP) if (rbd_dev->mapping.size != rbd_dev->header.image_size) rbd_dev->mapping.size = rbd_dev->header.image_size; ret = rbd_dev_v2_snap_context(rbd_dev); dout("rbd_dev_v2_snap_context returned %d\n", ret); - if (ret) - goto out; out: up_write(&rbd_dev->header_rwsem); @@ -4498,24 +4527,6 @@ static int rbd_dev_v2_header_onetime(struct rbd_device *rbd_dev) if (ret) goto out_err; - /* If the image supports layering, get the parent info */ - - if (rbd_dev->header.features & RBD_FEATURE_LAYERING) { - ret = rbd_dev_v2_parent_info(rbd_dev); - if (ret) - goto out_err; - /* - * Print a warning if this image has a parent. - * Don't print it if the image now being probed - * is itself a parent. We can tell at this point - * because we won't know its pool name yet (just its - * pool id). - */ - if (rbd_dev->parent_spec && rbd_dev->spec->pool_name) - rbd_warn(rbd_dev, "WARNING: kernel layering " - "is EXPERIMENTAL!"); - } - /* If the image supports fancy striping, get its parameters */ if (rbd_dev->header.features & RBD_FEATURE_STRIPINGV2) { @@ -4527,11 +4538,7 @@ static int rbd_dev_v2_header_onetime(struct rbd_device *rbd_dev) return 0; out_err: - rbd_dev->parent_overlap = 0; - rbd_spec_put(rbd_dev->parent_spec); - rbd_dev->parent_spec = NULL; - kfree(rbd_dev->header_name); - rbd_dev->header_name = NULL; + rbd_dev->header.features = 0; kfree(rbd_dev->header.object_prefix); rbd_dev->header.object_prefix = NULL; -- cgit v0.10.2 From 8785b1d487f0a31afd2c802499786d3b355eccea Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Thu, 9 May 2013 10:08:49 -0500 Subject: rbd: don't release write request until necessary Previously when a layered write was going to involve a copyup request, the original osd request was released before submitting the parent full-object read. The osd request for the copyup would then be allocated in rbd_img_obj_parent_read_full_callback(). Shortly we will be handling the event of mapped layered images getting flattened, and when that occurs we need to resubmit the original request. We therefore don't want to release the osd request until we really konw we're going to replace it--in the callback function. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index fcef63c..d861c71 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -2194,13 +2194,17 @@ rbd_img_obj_parent_read_full_callback(struct rbd_img_request *img_request) if (result) goto out_err; - /* Allocate the new copyup osd request for the original request */ - + /* + * The original osd request is of no use to use any more. + * We need a new one that can hold the two ops in a copyup + * request. Allocate the new copyup osd request for the + * original request, and release the old one. + */ result = -ENOMEM; - rbd_assert(!orig_request->osd_req); osd_req = rbd_osd_req_create_copyup(orig_request); if (!osd_req) goto out_err; + rbd_osd_req_destroy(orig_request->osd_req); orig_request->osd_req = osd_req; orig_request->copyup_pages = pages; orig_request->copyup_page_count = page_count; @@ -2277,15 +2281,6 @@ static int rbd_img_obj_parent_read_full(struct rbd_obj_request *obj_request) rbd_assert(rbd_dev->parent != NULL); /* - * First things first. The original osd request is of no - * use to use any more, we'll need a new one that can hold - * the two ops in a copyup request. We'll get that later, - * but for now we can release the old one. - */ - rbd_osd_req_destroy(obj_request->osd_req); - obj_request->osd_req = NULL; - - /* * Determine the byte range covered by the object in the * child image to which the original request was to be sent. */ -- cgit v0.10.2 From fb65d2284c117cfc28d30217d25a14a8e7a75a94 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Wed, 8 May 2013 22:50:04 -0500 Subject: rbd: define rbd_dev_unparent() Define rbd_dev_unparent() to encapsulate cleaning up parent data structures from a layered rbd image. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index d861c71..9c2b20a 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -1837,6 +1837,17 @@ static void rbd_obj_request_destroy(struct kref *kref) kmem_cache_free(rbd_obj_request_cache, obj_request); } +/* It's OK to call this for a device with no parent */ + +static void rbd_spec_put(struct rbd_spec *spec); +static void rbd_dev_unparent(struct rbd_device *rbd_dev) +{ + rbd_dev_remove_parent(rbd_dev); + rbd_spec_put(rbd_dev->parent_spec); + rbd_dev->parent_spec = NULL; + rbd_dev->parent_overlap = 0; +} + /* * Caller is responsible for filling in the list of object requests * that comprises the image request, and the Linux request pointer @@ -4491,10 +4502,7 @@ static void rbd_dev_unprobe(struct rbd_device *rbd_dev) { struct rbd_image_header *header; - rbd_dev_remove_parent(rbd_dev); - rbd_spec_put(rbd_dev->parent_spec); - rbd_dev->parent_spec = NULL; - rbd_dev->parent_overlap = 0; + rbd_dev_unparent(rbd_dev); /* Free dynamic fields from the header, then zero it out */ @@ -4570,7 +4578,7 @@ static int rbd_dev_probe_parent(struct rbd_device *rbd_dev) return 0; out_err: if (parent) { - rbd_spec_put(rbd_dev->parent_spec); + rbd_dev_unparent(rbd_dev); kfree(rbd_dev->header_name); rbd_dev_destroy(parent); } else { -- cgit v0.10.2 From e93f3152357ca75284284bef8eeea7d45fe1bab1 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Wed, 8 May 2013 22:50:04 -0500 Subject: rbd: define parent image request routines Define rbd_parent_request_create() and rbd_parent_request_destroy() to handle the creation of parent image requests submitted for layered image objects. For simplicity, let rbd_img_request_put() handle dropping the reference to any image request (parent or not), and call whichever destructor is appropriate on the last put. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 9c2b20a..1ffdfbf 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -1359,13 +1359,18 @@ static void rbd_obj_request_put(struct rbd_obj_request *obj_request) kref_put(&obj_request->kref, rbd_obj_request_destroy); } +static bool img_request_child_test(struct rbd_img_request *img_request); +static void rbd_parent_request_destroy(struct kref *kref); static void rbd_img_request_destroy(struct kref *kref); static void rbd_img_request_put(struct rbd_img_request *img_request) { rbd_assert(img_request != NULL); dout("%s: img %p (was %d)\n", __func__, img_request, atomic_read(&img_request->kref.refcount)); - kref_put(&img_request->kref, rbd_img_request_destroy); + if (img_request_child_test(img_request)) + kref_put(&img_request->kref, rbd_parent_request_destroy); + else + kref_put(&img_request->kref, rbd_img_request_destroy); } static inline void rbd_img_obj_request_add(struct rbd_img_request *img_request, @@ -1482,6 +1487,12 @@ static void img_request_child_set(struct rbd_img_request *img_request) smp_mb(); } +static void img_request_child_clear(struct rbd_img_request *img_request) +{ + clear_bit(IMG_REQ_CHILD, &img_request->flags); + smp_mb(); +} + static bool img_request_child_test(struct rbd_img_request *img_request) { smp_mb(); @@ -1856,8 +1867,7 @@ static void rbd_dev_unparent(struct rbd_device *rbd_dev) static struct rbd_img_request *rbd_img_request_create( struct rbd_device *rbd_dev, u64 offset, u64 length, - bool write_request, - bool child_request) + bool write_request) { struct rbd_img_request *img_request; @@ -1882,8 +1892,6 @@ static struct rbd_img_request *rbd_img_request_create( } else { img_request->snap_id = rbd_dev->spec->snap_id; } - if (child_request) - img_request_child_set(img_request); if (rbd_dev->parent_overlap) img_request_layered_set(img_request); spin_lock_init(&img_request->completion_lock); @@ -1918,12 +1926,46 @@ static void rbd_img_request_destroy(struct kref *kref) if (img_request_write_test(img_request)) ceph_put_snap_context(img_request->snapc); - if (img_request_child_test(img_request)) - rbd_obj_request_put(img_request->obj_request); - kmem_cache_free(rbd_img_request_cache, img_request); } +static struct rbd_img_request *rbd_parent_request_create( + struct rbd_obj_request *obj_request, + u64 img_offset, u64 length) +{ + struct rbd_img_request *parent_request; + struct rbd_device *rbd_dev; + + rbd_assert(obj_request->img_request); + rbd_dev = obj_request->img_request->rbd_dev; + + parent_request = rbd_img_request_create(rbd_dev->parent, + img_offset, length, false); + if (!parent_request) + return NULL; + + img_request_child_set(parent_request); + rbd_obj_request_get(obj_request); + parent_request->obj_request = obj_request; + + return parent_request; +} + +static void rbd_parent_request_destroy(struct kref *kref) +{ + struct rbd_img_request *parent_request; + struct rbd_obj_request *orig_request; + + parent_request = container_of(kref, struct rbd_img_request, kref); + orig_request = parent_request->obj_request; + + parent_request->obj_request = NULL; + rbd_obj_request_put(orig_request); + img_request_child_clear(parent_request); + + rbd_img_request_destroy(kref); +} + static bool rbd_img_obj_end_request(struct rbd_obj_request *obj_request) { struct rbd_img_request *img_request; @@ -2321,13 +2363,10 @@ static int rbd_img_obj_parent_read_full(struct rbd_obj_request *obj_request) } result = -ENOMEM; - parent_request = rbd_img_request_create(rbd_dev->parent, - img_offset, length, - false, true); + parent_request = rbd_parent_request_create(obj_request, + img_offset, length); if (!parent_request) goto out_err; - rbd_obj_request_get(obj_request); - parent_request->obj_request = obj_request; result = rbd_img_request_fill(parent_request, OBJ_REQUEST_PAGES, pages); if (result) @@ -2580,7 +2619,6 @@ out: static void rbd_img_parent_read(struct rbd_obj_request *obj_request) { - struct rbd_device *rbd_dev; struct rbd_img_request *img_request; int result; @@ -2589,20 +2627,14 @@ static void rbd_img_parent_read(struct rbd_obj_request *obj_request) rbd_assert(obj_request->result == (s32) -ENOENT); rbd_assert(obj_request_type_valid(obj_request->type)); - rbd_dev = obj_request->img_request->rbd_dev; - rbd_assert(rbd_dev->parent != NULL); /* rbd_read_finish(obj_request, obj_request->length); */ - img_request = rbd_img_request_create(rbd_dev->parent, + img_request = rbd_parent_request_create(obj_request, obj_request->img_offset, - obj_request->length, - false, true); + obj_request->length); result = -ENOMEM; if (!img_request) goto out_err; - rbd_obj_request_get(obj_request); - img_request->obj_request = obj_request; - if (obj_request->type == OBJ_REQUEST_BIO) result = rbd_img_request_fill(img_request, OBJ_REQUEST_BIO, obj_request->bio_list); @@ -2913,7 +2945,7 @@ static void rbd_request_fn(struct request_queue *q) result = -ENOMEM; img_request = rbd_img_request_create(rbd_dev, offset, length, - write_request, false); + write_request); if (!img_request) goto end_request; -- cgit v0.10.2 From a2acd00e7964dbb1668a5956c9d0a4bdeb838c4a Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Wed, 8 May 2013 22:50:04 -0500 Subject: rbd: reference count parent requests Keep a reference count for uses of the parent information for an rbd device. An initial reference is set in rbd_img_request_create() if the target image has a parent (with non-zero overlap). Each image request for an image with a non-zero parent overlap gets another reference when it's created, and that reference is dropped when the request is destroyed. The initial reference is dropped when the image gets torn down. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 1ffdfbf..8b6091b 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -55,6 +55,39 @@ #define SECTOR_SHIFT 9 #define SECTOR_SIZE (1ULL << SECTOR_SHIFT) +/* + * Increment the given counter and return its updated value. + * If the counter is already 0 it will not be incremented. + * If the counter is already at its maximum value returns + * -EINVAL without updating it. + */ +static int atomic_inc_return_safe(atomic_t *v) +{ + unsigned int counter; + + counter = (unsigned int)__atomic_add_unless(v, 1, 0); + if (counter <= (unsigned int)INT_MAX) + return (int)counter; + + atomic_dec(v); + + return -EINVAL; +} + +/* Decrement the counter. Return the resulting value, or -EINVAL */ +static int atomic_dec_return_safe(atomic_t *v) +{ + int counter; + + counter = atomic_dec_return(v); + if (counter >= 0) + return counter; + + atomic_inc(v); + + return -EINVAL; +} + #define RBD_DRV_NAME "rbd" #define RBD_DRV_NAME_LONG "rbd (rados block device)" @@ -312,6 +345,7 @@ struct rbd_device { struct rbd_spec *parent_spec; u64 parent_overlap; + atomic_t parent_ref; struct rbd_device *parent; /* protects updating the header */ @@ -361,6 +395,7 @@ static ssize_t rbd_add(struct bus_type *bus, const char *buf, static ssize_t rbd_remove(struct bus_type *bus, const char *buf, size_t count); static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool mapping); +static void rbd_spec_put(struct rbd_spec *spec); static struct bus_attribute rbd_bus_attrs[] = { __ATTR(add, S_IWUSR, NULL, rbd_add), @@ -1505,6 +1540,12 @@ static void img_request_layered_set(struct rbd_img_request *img_request) smp_mb(); } +static void img_request_layered_clear(struct rbd_img_request *img_request) +{ + clear_bit(IMG_REQ_LAYERED, &img_request->flags); + smp_mb(); +} + static bool img_request_layered_test(struct rbd_img_request *img_request) { smp_mb(); @@ -1860,6 +1901,58 @@ static void rbd_dev_unparent(struct rbd_device *rbd_dev) } /* + * Parent image reference counting is used to determine when an + * image's parent fields can be safely torn down--after there are no + * more in-flight requests to the parent image. When the last + * reference is dropped, cleaning them up is safe. + */ +static void rbd_dev_parent_put(struct rbd_device *rbd_dev) +{ + int counter; + + if (!rbd_dev->parent_spec) + return; + + counter = atomic_dec_return_safe(&rbd_dev->parent_ref); + if (counter > 0) + return; + + /* Last reference; clean up parent data structures */ + + if (!counter) + rbd_dev_unparent(rbd_dev); + else + rbd_warn(rbd_dev, "parent reference underflow\n"); +} + +/* + * If an image has a non-zero parent overlap, get a reference to its + * parent. + * + * Returns true if the rbd device has a parent with a non-zero + * overlap and a reference for it was successfully taken, or + * false otherwise. + */ +static bool rbd_dev_parent_get(struct rbd_device *rbd_dev) +{ + int counter; + + if (!rbd_dev->parent_spec) + return false; + + counter = atomic_inc_return_safe(&rbd_dev->parent_ref); + if (counter > 0 && rbd_dev->parent_overlap) + return true; + + /* Image was flattened, but parent is not yet torn down */ + + if (counter < 0) + rbd_warn(rbd_dev, "parent reference overflow\n"); + + return false; +} + +/* * Caller is responsible for filling in the list of object requests * that comprises the image request, and the Linux request pointer * (if there is one). @@ -1892,7 +1985,7 @@ static struct rbd_img_request *rbd_img_request_create( } else { img_request->snap_id = rbd_dev->spec->snap_id; } - if (rbd_dev->parent_overlap) + if (rbd_dev_parent_get(rbd_dev)) img_request_layered_set(img_request); spin_lock_init(&img_request->completion_lock); img_request->next_completion = 0; @@ -1923,6 +2016,11 @@ static void rbd_img_request_destroy(struct kref *kref) rbd_img_obj_request_del(img_request, obj_request); rbd_assert(img_request->obj_request_count == 0); + if (img_request_layered_test(img_request)) { + img_request_layered_clear(img_request); + rbd_dev_parent_put(img_request->rbd_dev); + } + if (img_request_write_test(img_request)) ceph_put_snap_context(img_request->snapc); @@ -3502,6 +3600,7 @@ static struct rbd_device *rbd_dev_create(struct rbd_client *rbdc, spin_lock_init(&rbd_dev->lock); rbd_dev->flags = 0; + atomic_set(&rbd_dev->parent_ref, 0); INIT_LIST_HEAD(&rbd_dev->node); init_rwsem(&rbd_dev->header_rwsem); @@ -4534,7 +4633,7 @@ static void rbd_dev_unprobe(struct rbd_device *rbd_dev) { struct rbd_image_header *header; - rbd_dev_unparent(rbd_dev); + rbd_dev_parent_put(rbd_dev); /* Free dynamic fields from the header, then zero it out */ @@ -4606,6 +4705,7 @@ static int rbd_dev_probe_parent(struct rbd_device *rbd_dev) if (ret < 0) goto out_err; rbd_dev->parent = parent; + atomic_set(&rbd_dev->parent_ref, 1); return 0; out_err: -- cgit v0.10.2 From 392a9dad7e777296fe79d97a6b3acd735ad2eb5f Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 17:40:33 -0500 Subject: rbd: detect when clone image is flattened A format 2 clone image can be the subject of a "flatten" operation, during which all of its data gets "copied up" from its parent image, leaving the image fully populated. Once this is complete, the clone's association with the parent is abolished. Since this can occur when a clone is mapped, we need to detect when it has occurred and handle it accordingly. We know an image has been flattened when we know it at one time had a parent, but we have learned (via a "get_parent" object class method call) it no longer has one. There might be in-flight requests at the point we learn an image has been flattened, so we can't simply clean up parent data structures right away. Instead, we'll drop the initial parent reference when the parent has disappeared (rather than when the image gets destroyed), which will allow the last in-flight reference to clean things up when it's complete. We leverage the fact that a zero parent overlap renders an image effectively unlayered. We set the overlap to 0 at the point we detect the clone image has flattened, which allows the unlayered behavior to take effect immediately, while keeping other parent structures in place until in-flight requests to complete. This and the next few patches resolve: http://tracker.ceph.com/issues/3763 Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 8b6091b..9717e20 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -1929,6 +1929,11 @@ static void rbd_dev_parent_put(struct rbd_device *rbd_dev) * If an image has a non-zero parent overlap, get a reference to its * parent. * + * We must get the reference before checking for the overlap to + * coordinate properly with zeroing the parent overlap in + * rbd_dev_v2_parent_info() when an image gets flattened. We + * drop it again if there is no overlap. + * * Returns true if the rbd device has a parent with a non-zero * overlap and a reference for it was successfully taken, or * false otherwise. @@ -3782,8 +3787,26 @@ static int rbd_dev_v2_parent_info(struct rbd_device *rbd_dev) end = reply_buf + ret; ret = -ERANGE; ceph_decode_64_safe(&p, end, pool_id, out_err); - if (pool_id == CEPH_NOPOOL) + if (pool_id == CEPH_NOPOOL) { + /* + * Either the parent never existed, or we have + * record of it but the image got flattened so it no + * longer has a parent. When the parent of a + * layered image disappears we immediately set the + * overlap to 0. The effect of this is that all new + * requests will be treated as if the image had no + * parent. + */ + if (rbd_dev->parent_overlap) { + rbd_dev->parent_overlap = 0; + smp_mb(); + rbd_dev_parent_put(rbd_dev); + pr_info("%s: clone image has been flattened\n", + rbd_dev->disk->disk_name); + } + goto out; /* No parent? No problem. */ + } /* The ceph file layout needs to fit pool id in 32 bits */ @@ -4633,7 +4656,10 @@ static void rbd_dev_unprobe(struct rbd_device *rbd_dev) { struct rbd_image_header *header; - rbd_dev_parent_put(rbd_dev); + /* Drop parent reference unless it's already been done (or none) */ + + if (rbd_dev->parent_overlap) + rbd_dev_parent_put(rbd_dev); /* Free dynamic fields from the header, then zero it out */ -- cgit v0.10.2 From 02c74fbad9d4a5149756eb35be7300736e4904e9 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 17:40:33 -0500 Subject: rbd: re-submit read request for flattened clone If a clone image gets flattened while a parent read request is underway, the original rbd object request needs to be resubmitted. The reason is that by the time we get the response to the parent read request, the data read from the parent may be out of date. In other words, we could see this sequence of events: rbd client parent image/osd ---------- ---------------- original object ENOENT; issue parent read respond to parent read child image flattened original image header refresh <--- original object written independently here parent read response received Add code to rbd_img_parent_read_callback() to detect when a clone's parent image has disappeared (as evidenced by its parent overlap becoming 0), and re-submit the original read request in that case. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 9717e20..4edcb6d 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -2682,14 +2682,36 @@ static void rbd_img_parent_read_callback(struct rbd_img_request *img_request) struct rbd_obj_request *obj_request; struct rbd_device *rbd_dev; u64 obj_end; + u64 img_xferred; + int img_result; rbd_assert(img_request_child_test(img_request)); + /* First get what we need from the image request and release it */ + obj_request = img_request->obj_request; + img_xferred = img_request->xferred; + img_result = img_request->result; + rbd_img_request_put(img_request); + + /* + * If the overlap has become 0 (most likely because the + * image has been flattened) we need to re-submit the + * original request. + */ rbd_assert(obj_request); rbd_assert(obj_request->img_request); + rbd_dev = obj_request->img_request->rbd_dev; + if (!rbd_dev->parent_overlap) { + struct ceph_osd_client *osdc; + + osdc = &rbd_dev->rbd_client->client->osdc; + img_result = rbd_obj_request_submit(osdc, obj_request); + if (!img_result) + return; + } - obj_request->result = img_request->result; + obj_request->result = img_result; if (obj_request->result) goto out; @@ -2702,7 +2724,6 @@ static void rbd_img_parent_read_callback(struct rbd_img_request *img_request) */ rbd_assert(obj_request->img_offset < U64_MAX - obj_request->length); obj_end = obj_request->img_offset + obj_request->length; - rbd_dev = obj_request->img_request->rbd_dev; if (obj_end > rbd_dev->parent_overlap) { u64 xferred = 0; @@ -2710,12 +2731,11 @@ static void rbd_img_parent_read_callback(struct rbd_img_request *img_request) xferred = rbd_dev->parent_overlap - obj_request->img_offset; - obj_request->xferred = min(img_request->xferred, xferred); + obj_request->xferred = min(img_xferred, xferred); } else { - obj_request->xferred = img_request->xferred; + obj_request->xferred = img_xferred; } out: - rbd_img_request_put(img_request); rbd_img_obj_request_read_callback(obj_request); rbd_obj_request_complete(obj_request); } -- cgit v0.10.2 From bbea1c1a31b1128d34b2b5b4f28276969cce14e9 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 17:40:33 -0500 Subject: rbd: re-submit write request for flattened clone Add code to rbd_img_parent_read_full_callback() to detect when a clone's parent image has disappeared, and re-submit the original write request in that case. (See the previous commit for more reasoning about why this is appropriate.) Rename some variables in rbd_img_obj_parent_read_full_callback() to match the convention used in the previous patch. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 4edcb6d..5c27318 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -2319,7 +2319,7 @@ rbd_img_obj_parent_read_full_callback(struct rbd_img_request *img_request) struct rbd_device *rbd_dev; struct page **pages; u32 page_count; - int result; + int img_result; u64 parent_length; u64 offset; u64 length; @@ -2338,7 +2338,7 @@ rbd_img_obj_parent_read_full_callback(struct rbd_img_request *img_request) orig_request = img_request->obj_request; rbd_assert(orig_request != NULL); rbd_assert(obj_request_type_valid(orig_request->type)); - result = img_request->result; + img_result = img_request->result; parent_length = img_request->length; rbd_assert(parent_length == img_request->xferred); rbd_img_request_put(img_request); @@ -2347,7 +2347,22 @@ rbd_img_obj_parent_read_full_callback(struct rbd_img_request *img_request) rbd_dev = orig_request->img_request->rbd_dev; rbd_assert(rbd_dev); - if (result) + /* + * If the overlap has become 0 (most likely because the + * image has been flattened) we need to free the pages + * and re-submit the original write request. + */ + if (!rbd_dev->parent_overlap) { + struct ceph_osd_client *osdc; + + ceph_release_page_vector(pages, page_count); + osdc = &rbd_dev->rbd_client->client->osdc; + img_result = rbd_obj_request_submit(osdc, orig_request); + if (!img_result) + return; + } + + if (img_result) goto out_err; /* @@ -2356,7 +2371,7 @@ rbd_img_obj_parent_read_full_callback(struct rbd_img_request *img_request) * request. Allocate the new copyup osd request for the * original request, and release the old one. */ - result = -ENOMEM; + img_result = -ENOMEM; osd_req = rbd_osd_req_create_copyup(orig_request); if (!osd_req) goto out_err; @@ -2391,13 +2406,13 @@ rbd_img_obj_parent_read_full_callback(struct rbd_img_request *img_request) orig_request->callback = rbd_img_obj_copyup_callback; osdc = &rbd_dev->rbd_client->client->osdc; - result = rbd_obj_request_submit(osdc, orig_request); - if (!result) + img_result = rbd_obj_request_submit(osdc, orig_request); + if (!img_result) return; out_err: /* Record the error code and complete the request */ - orig_request->result = result; + orig_request->result = img_result; orig_request->xferred = 0; obj_request_done_set(orig_request); rbd_obj_request_complete(orig_request); -- cgit v0.10.2 From 638f5abed3f7d8a7fc24087bd760fa3d99f68a39 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 17:40:33 -0500 Subject: rbd: re-submit flattened write request (part 2) Add code to rbd_img_obj_exists_callback() to detect when a clone's parent image has disappeared, and re-submit the original write request in that case. Kill off some redundant assertions. This completes the resolution for: http://tracker.ceph.com/issues/3763 Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 5c27318..6b872f2 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -2516,6 +2516,7 @@ out_err: static void rbd_img_obj_exists_callback(struct rbd_obj_request *obj_request) { struct rbd_obj_request *orig_request; + struct rbd_device *rbd_dev; int result; rbd_assert(!obj_request_img_data_test(obj_request)); @@ -2538,8 +2539,21 @@ static void rbd_img_obj_exists_callback(struct rbd_obj_request *obj_request) obj_request->xferred, obj_request->length); rbd_obj_request_put(obj_request); - rbd_assert(orig_request); - rbd_assert(orig_request->img_request); + /* + * If the overlap has become 0 (most likely because the + * image has been flattened) we need to free the pages + * and re-submit the original write request. + */ + rbd_dev = orig_request->img_request->rbd_dev; + if (!rbd_dev->parent_overlap) { + struct ceph_osd_client *osdc; + + rbd_obj_request_put(orig_request); + osdc = &rbd_dev->rbd_client->client->osdc; + result = rbd_obj_request_submit(osdc, orig_request); + if (!result) + return; + } /* * Our only purpose here is to determine whether the object -- cgit v0.10.2 From 6880b0150a7c25fd75c5ece80abc49ebf53c38c1 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sat, 11 May 2013 19:04:09 +0000 Subject: parisc: make default cross compiler search more robust (v3) People/distros vary how they prefix the toolchain name for 64bit builds. Rather than enforce one convention over another, add a for loop which does a search for all the general prefixes. For 64bit builds, we now search for (in order): hppa64-unknown-linux-gnu hppa64-linux-gnu hppa64-linux For 32bit builds, we look for: hppa-unknown-linux-gnu hppa-linux-gnu hppa-linux hppa2.0-unknown-linux-gnu hppa2.0-linux-gnu hppa2.0-linux hppa1.1-unknown-linux-gnu hppa1.1-linux-gnu hppa1.1-linux This patch was initiated by Mike Frysinger, with feedback from Jeroen Roovers, John David Anglin and Helge Deller. Signed-off-by: Mike Frysinger Signed-off-by: Jeroen Roovers Signed-off-by: John David Anglin Signed-off-by: Helge Deller diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile index 2f967cc..1976900 100644 --- a/arch/parisc/Makefile +++ b/arch/parisc/Makefile @@ -23,24 +23,21 @@ NM = sh $(srctree)/arch/parisc/nm CHECKFLAGS += -D__hppa__=1 LIBGCC = $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) -MACHINE := $(shell uname -m) -NATIVE := $(if $(filter parisc%,$(MACHINE)),1,0) - ifdef CONFIG_64BIT UTS_MACHINE := parisc64 CHECKFLAGS += -D__LP64__=1 -m64 -WIDTH := 64 +CC_ARCHES = hppa64 else # 32-bit -WIDTH := +CC_ARCHES = hppa hppa2.0 hppa1.1 endif -# attempt to help out folks who are cross-compiling -ifeq ($(NATIVE),1) -CROSS_COMPILE := hppa$(WIDTH)-linux- -else - ifeq ($(CROSS_COMPILE),) - CROSS_COMPILE := hppa$(WIDTH)-linux-gnu- - endif +ifneq ($(SUBARCH),$(UTS_MACHINE)) + ifeq ($(CROSS_COMPILE),) + CC_SUFFIXES = linux linux-gnu unknown-linux-gnu + CROSS_COMPILE := $(call cc-cross-prefix, \ + $(foreach a,$(CC_ARCHES), \ + $(foreach s,$(CC_SUFFIXES),$(a)-$(s)-))) + endif endif OBJCOPY_FLAGS =-O binary -R .note -R .comment -S -- cgit v0.10.2 From d6ffe1b8ecc59ae23524e408063dc7725f485f96 Mon Sep 17 00:00:00 2001 From: Hans-Christian Egtvedt Date: Mon, 13 May 2013 22:13:59 +0200 Subject: avr32: move NODES_SHIFT into Kconfig and delete numnodes.h This patch moves the NODES_SHIFT symbol into Kconfig to synchronize AVR32 architecture with the current kernel. The global header files do longer use the value from numnodes.h. See commit c80d79d746cc48bd94b0ce4f6d4f3c90cd403aaf for details. Signed-off-by: Paul Bolle Signed-off-by: Hans-Christian Egtvedt diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index 22c4030..ba4d405 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -208,6 +208,11 @@ config ARCH_DISCONTIGMEM_ENABLE config ARCH_SPARSEMEM_ENABLE def_bool n +config NODES_SHIFT + int + default "2" + depends on NEED_MULTIPLE_NODES + source "mm/Kconfig" config OWNERSHIP_TRACE diff --git a/arch/avr32/include/asm/numnodes.h b/arch/avr32/include/asm/numnodes.h deleted file mode 100644 index 0b864d7..0000000 --- a/arch/avr32/include/asm/numnodes.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_AVR32_NUMNODES_H -#define __ASM_AVR32_NUMNODES_H - -/* Max 4 nodes */ -#define NODES_SHIFT 2 - -#endif /* __ASM_AVR32_NUMNODES_H */ -- cgit v0.10.2 From e68c636d88db3fda74e664ecb1a213ae0d50a7d8 Mon Sep 17 00:00:00 2001 From: Hans-Christian Egtvedt Date: Mon, 13 May 2013 22:22:10 +0200 Subject: avr32: fix relocation check for signed 18-bit offset Caught by static code analysis by David. Reported-by: David Binderman Signed-off-by: Hans-Christian Egtvedt Cc: stable@kernel.org diff --git a/arch/avr32/kernel/module.c b/arch/avr32/kernel/module.c index 596f730..2c94129 100644 --- a/arch/avr32/kernel/module.c +++ b/arch/avr32/kernel/module.c @@ -264,7 +264,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, break; case R_AVR32_GOT18SW: if ((relocation & 0xfffe0003) != 0 - && (relocation & 0xfffc0003) != 0xffff0000) + && (relocation & 0xfffc0000) != 0xfffc0000) return reloc_overflow(module, "R_AVR32_GOT18SW", relocation); relocation >>= 2; -- cgit v0.10.2 From 1581a03573e6c9ebd931e31f9172cce25dcb69e6 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Wed, 24 Apr 2013 11:26:14 -0700 Subject: staging: comedi: ni_labpc: fix build when VIRT_TO_BUS is not defined After merging the final tree, the next-20130424 build (powerpc allyesconfig) failed like this: drivers/staging/comedi/drivers/ni_labpc.c: In function 'labpc_ai_cmd': drivers/staging/comedi/drivers/ni_labpc.c:980:9: error: implicit declaration of function 'virt_to_bus' [-Werror=implicit-function-declaration] The virt_to_bus() is only needed for the ISA DMA support in this driver. On powerpc, CONFIG_COMEDI_NI_LABPC_ISA cannot be enabled due to the depends on VIRT_TO_BUS but the PCI driver, ni_labpc_pci, can be enabled. That driver uses the ni_labpc driver for the common support code shared by the ISA, PCI, and PCMCIA boards. The ISA specific support, and the optional ISA DMA support, are currently still in the common ni_labpc driver. The ISA specific code is protected by #if IS_ENABLED(CONFIG_COMEDI_NI_LABPC_ISA) and the ISA DMA support is protected by #ifdef CONFIG_ISA_DMA_API. This allows the ISA support to be enabled on architectures that support VIRT_TO_BUS and optionally enables ISA DMA support if ISA_DMA_API is enabled. Unfortunately, the ISA DMA code uses virt_to_bus(). This results in the build failure for architectures that enable ISA_DMA_API but do not have VIRT_TO_BUS. Add a new member to the private data, dma_addr, to hold the phys_addr_t returned by virt_to_bus() and initialize it in the ISA specific labpc_attach(). For architectures that enable ISA_DMA_API but not VIRT_TO_BUS, this will fix the build error. This is also safe for architectures the enable both options but don't enable COMEDI_NI_LABPC_ISA because the dma channel (devpriv->dma_chan) is only initialized in the ISA specific labpc_attach(). Signed-off-by: H Hartley Sweeten Reported-by: Stephen Rothwell Cc: Ian Abbott Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c index 3d978f3..77a7bb6 100644 --- a/drivers/staging/comedi/drivers/ni_labpc.c +++ b/drivers/staging/comedi/drivers/ni_labpc.c @@ -976,8 +976,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) /* clear flip-flop to make sure 2-byte registers for * count and address get set correctly */ clear_dma_ff(devpriv->dma_chan); - set_dma_addr(devpriv->dma_chan, - virt_to_bus(devpriv->dma_buffer)); + set_dma_addr(devpriv->dma_chan, devpriv->dma_addr); /* set appropriate size of transfer */ devpriv->dma_transfer_size = labpc_suggest_transfer_size(cmd); if (cmd->stop_src == TRIG_COUNT && @@ -1089,7 +1088,7 @@ static void labpc_drain_dma(struct comedi_device *dev) devpriv->count -= num_points; /* set address and count for next transfer */ - set_dma_addr(devpriv->dma_chan, virt_to_bus(devpriv->dma_buffer)); + set_dma_addr(devpriv->dma_chan, devpriv->dma_addr); set_dma_count(devpriv->dma_chan, leftover * sample_size); release_dma_lock(flags); @@ -1741,6 +1740,9 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it) unsigned long dma_flags; devpriv->dma_chan = dma_chan; + devpriv->dma_addr = + virt_to_bus(devpriv->dma_buffer); + dma_flags = claim_dma_lock(); disable_dma(devpriv->dma_chan); set_dma_mode(devpriv->dma_chan, DMA_MODE_READ); diff --git a/drivers/staging/comedi/drivers/ni_labpc.h b/drivers/staging/comedi/drivers/ni_labpc.h index 615f16f..4b691f5 100644 --- a/drivers/staging/comedi/drivers/ni_labpc.h +++ b/drivers/staging/comedi/drivers/ni_labpc.h @@ -82,6 +82,7 @@ struct labpc_private { unsigned int divisor_b1; unsigned int dma_chan; /* dma channel to use */ u16 *dma_buffer; /* buffer ai will dma into */ + phys_addr_t dma_addr; /* transfer size in bytes for current transfer */ unsigned int dma_transfer_size; /* we are using dma/fifo-half-full/etc. */ -- cgit v0.10.2 From b3fab427739c76871c96834e72c369dd0e502d4b Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Fri, 10 May 2013 14:08:28 +0100 Subject: staging: comedi: allow buffer resize if previous resize failed When a comedi device is successfully attached, those subdevices that support asynchronous commands will have had buffers allocated successfully. It is possible to resize the buffers afterwards, but if the resize fails the subdevice is left with no buffer (`s->async->prealloc_buf == NULL`). Currently, this also causes any subsequent attempts to resize the buffer to fail with an error, which seems like a bad idea. Remove the check in `resize_async_buffer()` that causes the resize to fail if the subdevice currently has no buffer (presumably due to the failure of a previous resize attempt). Callers of `resize_async_buffer()` have already checked that the subdevice is allowed to have a buffer. Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c index 00f2547..924c54c 100644 --- a/drivers/staging/comedi/comedi_fops.c +++ b/drivers/staging/comedi/comedi_fops.c @@ -246,9 +246,6 @@ static int resize_async_buffer(struct comedi_device *dev, return -EBUSY; } - if (!async->prealloc_buf) - return -EINVAL; - /* make sure buffer is an integral number of pages * (we round up) */ new_size = (new_size + PAGE_SIZE - 1) & PAGE_MASK; -- cgit v0.10.2 From 4efc4bbdc1602d887d784be629a7a4efbf6b6e19 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Fri, 10 May 2013 14:07:15 +0100 Subject: staging: comedi: work without HAS_DMA The core "comedi" module and the "mite" helper module for NI PCI devices both have calls to `dma_alloc_coherent()` and `dma_free_coherent()`. Those functions are only available if `CONFIG_HAS_DMA` is defined. Apart from the "mite" module, the functions are only called for comedi drivers that set `s->async_dma_dir` (where `s` is a pointer to a `struct comedi_subdevice`) to anything other than `DMA_NONE`. Change local helper functions `__comedi_buf_alloc()` and `__comedi_buf_free()` to only call `dma_alloc_coherent()` and `dma_free_coherent()` if `CONFIG_HAS_DMA` is defined. Change the "Kconfig" to make the following configuration options depend on `HAS_DMA`: `COMEDI_MITE` - builds the "mite" module. `COMEDI_NI_6527` - selects `COMEDI_MITE`. `COMEDI_NI_65XX` - selects `COMEDI_MITE`. `COMEDI_NI_670X` - selects `COMEDI_MITE`. `COMEDI_NI_LABPC_PCI` - selects `COMEDI_MITE`. `COMEDI_NI_PCIDIO` - selects `COMEDI_MITE`. `COMEDI_NI_TIOCMD` - selects `COMEDI_MITE`. `COMEDI_NI_660X` - selects `COMEDI_NI_TIOCMD`, sets `s->async_dma_dir`. `COMEDI_NI_PCIMIO` - selects `COMEDI_NI_TIOCMD`, sets `s->async_dma_dir`. Signed-off-by: Ian Abbott Reviewed-by: H Hartley Sweeten Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig index 7871579..87e852a 100644 --- a/drivers/staging/comedi/Kconfig +++ b/drivers/staging/comedi/Kconfig @@ -981,6 +981,7 @@ config COMEDI_ME_DAQ config COMEDI_NI_6527 tristate "NI 6527 support" + depends on HAS_DMA select COMEDI_MITE ---help--- Enable support for the National Instruments 6527 PCI card @@ -990,6 +991,7 @@ config COMEDI_NI_6527 config COMEDI_NI_65XX tristate "NI 65xx static dio PCI card support" + depends on HAS_DMA select COMEDI_MITE ---help--- Enable support for National Instruments 65xx static dio boards. @@ -1003,6 +1005,7 @@ config COMEDI_NI_65XX config COMEDI_NI_660X tristate "NI 660x counter/timer PCI card support" + depends on HAS_DMA select COMEDI_NI_TIOCMD ---help--- Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602, @@ -1013,6 +1016,7 @@ config COMEDI_NI_660X config COMEDI_NI_670X tristate "NI 670x PCI card support" + depends on HAS_DMA select COMEDI_MITE ---help--- Enable support for National Instruments PCI-6703 and PCI-6704 @@ -1022,6 +1026,7 @@ config COMEDI_NI_670X config COMEDI_NI_LABPC_PCI tristate "NI Lab-PC PCI-1200 support" + depends on HAS_DMA select COMEDI_NI_LABPC select COMEDI_MITE ---help--- @@ -1032,6 +1037,7 @@ config COMEDI_NI_LABPC_PCI config COMEDI_NI_PCIDIO tristate "NI PCI-DIO32HS, PCI-6533, PCI-6534 support" + depends on HAS_DMA select COMEDI_MITE select COMEDI_8255 ---help--- @@ -1043,6 +1049,7 @@ config COMEDI_NI_PCIDIO config COMEDI_NI_PCIMIO tristate "NI PCI-MIO-E series and M series support" + depends on HAS_DMA select COMEDI_NI_TIOCMD select COMEDI_8255 select COMEDI_FC @@ -1095,10 +1102,12 @@ config COMEDI_SSV_DNP called ssv_dnp. config COMEDI_MITE + depends on HAS_DMA tristate config COMEDI_NI_TIOCMD tristate + depends on HAS_DMA select COMEDI_NI_TIO select COMEDI_MITE diff --git a/drivers/staging/comedi/comedi_buf.c b/drivers/staging/comedi/comedi_buf.c index ca70990..b6cd67a 100644 --- a/drivers/staging/comedi/comedi_buf.c +++ b/drivers/staging/comedi/comedi_buf.c @@ -51,10 +51,12 @@ static void __comedi_buf_free(struct comedi_device *dev, clear_bit(PG_reserved, &(virt_to_page(buf->virt_addr)->flags)); if (s->async_dma_dir != DMA_NONE) { +#ifdef CONFIG_HAS_DMA dma_free_coherent(dev->hw_dev, PAGE_SIZE, buf->virt_addr, buf->dma_addr); +#endif } else { free_page((unsigned long)buf->virt_addr); } @@ -84,11 +86,15 @@ static void __comedi_buf_alloc(struct comedi_device *dev, for (i = 0; i < n_pages; i++) { buf = &async->buf_page_list[i]; if (s->async_dma_dir != DMA_NONE) +#ifdef CONFIG_HAS_DMA buf->virt_addr = dma_alloc_coherent(dev->hw_dev, PAGE_SIZE, &buf->dma_addr, GFP_KERNEL | __GFP_COMP); +#else + break; +#endif else buf->virt_addr = (void *)get_zeroed_page(GFP_KERNEL); if (!buf->virt_addr) -- cgit v0.10.2 From bd304a736afd99cc38bad4d1628e8e2d05d308d5 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Fri, 10 May 2013 14:07:17 +0100 Subject: staging: comedi: ni_mio_common: only do counter commands for ni_pcimio "ni_mio_common.c" holds common code included by "ni_pcimio.c", "ni_atmio.c" and "ni_mio_cs.c", including a common initialization function `ni_E_init()`. Amongst other things, this initializes some counter subdevices to support comedi instructions and asynchronous commands. However, even though it sets up the handlers to support asynchronous commands on these subdevices, the handlers will return an error unless the `PCIDMA` macro is defined (which is defined only in "ni_pcimio.c"). If the `PCIDMA` macro is not defined, the comedi core will needlessly allocate buffers to support the asynchronous commands. Also, `s->async_dma_dir` is set to `DMA_BIDIRECTIONAL`, causing the physical pages for the buffers to be allocated using `dma_alloc_coherent()`. If the comedi core cannot call `dma_alloc_coherent()` because `CONFIG_HAS_DMA` is not defined, it will fail to allocate the buffers, which ultimately causes `ni_E_init()` to fail. Avoid the wastage and prevent the failure by only setting up asynchronous command support for the counter subdevices if the `PCIDMA` macro is defined. Signed-off-by: Ian Abbott Reviewed-by: H Hartley Sweeten Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c index a46d579..8c5dee9 100644 --- a/drivers/staging/comedi/drivers/ni_mio_common.c +++ b/drivers/staging/comedi/drivers/ni_mio_common.c @@ -310,9 +310,11 @@ static int ni_gpct_insn_read(struct comedi_device *dev, static int ni_gpct_insn_config(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data); +#ifdef PCIDMA static int ni_gpct_cmd(struct comedi_device *dev, struct comedi_subdevice *s); static int ni_gpct_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_cmd *cmd); +#endif static int ni_gpct_cancel(struct comedi_device *dev, struct comedi_subdevice *s); static void handle_gpct_interrupt(struct comedi_device *dev, @@ -4617,9 +4619,7 @@ static int ni_E_init(struct comedi_device *dev) for (j = 0; j < NUM_GPCT; ++j) { s = &dev->subdevices[NI_GPCT_SUBDEV(j)]; s->type = COMEDI_SUBD_COUNTER; - s->subdev_flags = - SDF_READABLE | SDF_WRITABLE | SDF_LSAMPL | SDF_CMD_READ - /* | SDF_CMD_WRITE */ ; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_LSAMPL; s->n_chan = 3; if (board->reg_type & ni_reg_m_series_mask) s->maxdata = 0xffffffff; @@ -4628,11 +4628,14 @@ static int ni_E_init(struct comedi_device *dev) s->insn_read = &ni_gpct_insn_read; s->insn_write = &ni_gpct_insn_write; s->insn_config = &ni_gpct_insn_config; +#ifdef PCIDMA + s->subdev_flags |= SDF_CMD_READ /* | SDF_CMD_WRITE */; s->do_cmd = &ni_gpct_cmd; s->len_chanlist = 1; s->do_cmdtest = &ni_gpct_cmdtest; s->cancel = &ni_gpct_cancel; s->async_dma_dir = DMA_BIDIRECTIONAL; +#endif s->private = &devpriv->counter_dev->counters[j]; devpriv->counter_dev->counters[j].chip_index = 0; @@ -5216,10 +5219,10 @@ static int ni_gpct_insn_write(struct comedi_device *dev, return ni_tio_winsn(counter, insn, data); } +#ifdef PCIDMA static int ni_gpct_cmd(struct comedi_device *dev, struct comedi_subdevice *s) { int retval; -#ifdef PCIDMA struct ni_gpct *counter = s->private; /* const struct comedi_cmd *cmd = &s->async->cmd; */ @@ -5233,23 +5236,20 @@ static int ni_gpct_cmd(struct comedi_device *dev, struct comedi_subdevice *s) ni_tio_acknowledge_and_confirm(counter, NULL, NULL, NULL, NULL); ni_e_series_enable_second_irq(dev, counter->counter_index, 1); retval = ni_tio_cmd(counter, s->async); -#else - retval = -ENOTSUPP; -#endif return retval; } +#endif +#ifdef PCIDMA static int ni_gpct_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_cmd *cmd) { -#ifdef PCIDMA struct ni_gpct *counter = s->private; return ni_tio_cmdtest(counter, cmd); -#else return -ENOTSUPP; -#endif } +#endif static int ni_gpct_cancel(struct comedi_device *dev, struct comedi_subdevice *s) { -- cgit v0.10.2 From e9166139f6f829c2e7bf6695f13e08d09303d6ca Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Fri, 10 May 2013 14:07:16 +0100 Subject: staging: comedi: complain if dma buffer allocation not supported When allocating a buffer to support asynchronous comedi commands, if a DMA coherent buffer was requested but `CONFIG_HAS_DMA` is undefined, bail out of local helper function `__comedi_buf_alloc()` with an error message. Signed-off-by: Ian Abbott Reviewed-by: H Hartley Sweeten Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/comedi_buf.c b/drivers/staging/comedi/comedi_buf.c index b6cd67a..d4be0e6 100644 --- a/drivers/staging/comedi/comedi_buf.c +++ b/drivers/staging/comedi/comedi_buf.c @@ -76,6 +76,12 @@ static void __comedi_buf_alloc(struct comedi_device *dev, struct comedi_buf_page *buf; unsigned i; + if (!IS_ENABLED(CONFIG_HAS_DMA) && s->async_dma_dir != DMA_NONE) { + dev_err(dev->class_dev, + "dma buffer allocation not supported\n"); + return; + } + async->buf_page_list = vzalloc(sizeof(*buf) * n_pages); if (async->buf_page_list) pages = vmalloc(sizeof(struct page *) * n_pages); -- cgit v0.10.2 From 705a421238964e26f13a87d01cefa229eb8a458d Mon Sep 17 00:00:00 2001 From: Denis Efremov Date: Thu, 9 May 2013 13:19:37 +0400 Subject: staging: nvec: remove inline marking of EXPORT_SYMBOL functions EXPORT_SYMBOL and inline directives are contradictory to each other. The patch fixes this inconsistency. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Denis Efremov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c index a88959f..954c992 100644 --- a/drivers/staging/nvec/nvec.c +++ b/drivers/staging/nvec/nvec.c @@ -185,7 +185,7 @@ static struct nvec_msg *nvec_msg_alloc(struct nvec_chip *nvec, * * Free the given message */ -inline void nvec_msg_free(struct nvec_chip *nvec, struct nvec_msg *msg) +void nvec_msg_free(struct nvec_chip *nvec, struct nvec_msg *msg) { if (msg != &nvec->tx_scratch) dev_vdbg(nvec->dev, "INFO: Free %ti\n", msg - nvec->msg_pool); -- cgit v0.10.2 From 6eabb3301b1facee669d9938f7c5a0295c21d71d Mon Sep 17 00:00:00 2001 From: Jaccon Bastiaansen Date: Mon, 13 May 2013 17:28:27 +0100 Subject: ARM: 7720/1: ARM v6/v7 cmpxchg64 shouldn't clear upper 32 bits of the old/new value The implementation of cmpxchg64() for the ARM v6 and v7 architecture casts parameter 2 and 3 (the old and new 64bit values) to an unsigned long before calling the atomic_cmpxchg64() function. This clears the top 32 bits of the old and new values, resulting in the wrong values being compare-exchanged. Luckily, this only appears to be used for 64-bit sched_clock, which we don't (yet) have on ARM. This bug was introduced by commit 3e0f5a15f500 ("ARM: 7404/1: cmpxchg64: use atomic64 and local64 routines for cmpxchg64"). Cc: Acked-by: Will Deacon Signed-off-by: Jaccon Bastiaansen Signed-off-by: Russell King diff --git a/arch/arm/include/asm/cmpxchg.h b/arch/arm/include/asm/cmpxchg.h index 7eb18c1..4f009c1 100644 --- a/arch/arm/include/asm/cmpxchg.h +++ b/arch/arm/include/asm/cmpxchg.h @@ -233,15 +233,15 @@ static inline unsigned long __cmpxchg_local(volatile void *ptr, ((__typeof__(*(ptr)))atomic64_cmpxchg(container_of((ptr), \ atomic64_t, \ counter), \ - (unsigned long)(o), \ - (unsigned long)(n))) + (unsigned long long)(o), \ + (unsigned long long)(n))) #define cmpxchg64_local(ptr, o, n) \ ((__typeof__(*(ptr)))local64_cmpxchg(container_of((ptr), \ local64_t, \ a), \ - (unsigned long)(o), \ - (unsigned long)(n))) + (unsigned long long)(o), \ + (unsigned long long)(n))) #endif /* __LINUX_ARM_ARCH__ >= 6 */ -- cgit v0.10.2 From b57ffac5e57bff33dde3cff35dff5c41876a6d12 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 13 May 2013 08:03:43 +0000 Subject: cpufreq / intel_pstate: use vzalloc() instead of vmalloc()/memset(0) Use vzalloc() instead of vmalloc() and memset(0). Signed-off-by: Wei Yongjun Acked-by: Viresh Kumar Acked-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 0cc7d60..9c36ace 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -709,10 +709,9 @@ static int __init intel_pstate_init(void) pr_info("Intel P-state driver initializing.\n"); - all_cpu_data = vmalloc(sizeof(void *) * num_possible_cpus()); + all_cpu_data = vzalloc(sizeof(void *) * num_possible_cpus()); if (!all_cpu_data) return -ENOMEM; - memset(all_cpu_data, 0, sizeof(void *) * num_possible_cpus()); rc = cpufreq_register_driver(&intel_pstate_driver); if (rc) -- cgit v0.10.2 From dc5aeae4f961ca8ea9511422236d7076585f149a Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 13 May 2013 02:42:11 +0000 Subject: PM: Documentation update for freeze state Signed-off-by: Zhang Rui Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt index 504dfe4..a66c982 100644 --- a/Documentation/power/devices.txt +++ b/Documentation/power/devices.txt @@ -268,7 +268,7 @@ situations. System Power Management Phases ------------------------------ Suspending or resuming the system is done in several phases. Different phases -are used for standby or memory sleep states ("suspend-to-RAM") and the +are used for freeze, standby, and memory sleep states ("suspend-to-RAM") and the hibernation state ("suspend-to-disk"). Each phase involves executing callbacks for every device before the next phase begins. Not all busses or classes support all these callbacks and not all drivers use all the callbacks. The @@ -309,7 +309,8 @@ execute the corresponding method from dev->driver->pm instead if there is one. Entering System Suspend ----------------------- -When the system goes into the standby or memory sleep state, the phases are: +When the system goes into the freeze, standby or memory sleep state, +the phases are: prepare, suspend, suspend_late, suspend_noirq. @@ -368,7 +369,7 @@ the devices that were suspended. Leaving System Suspend ---------------------- -When resuming from standby or memory sleep, the phases are: +When resuming from freeze, standby or memory sleep, the phases are: resume_noirq, resume_early, resume, complete. @@ -433,8 +434,8 @@ the system log. Entering Hibernation -------------------- -Hibernating the system is more complicated than putting it into the standby or -memory sleep state, because it involves creating and saving a system image. +Hibernating the system is more complicated than putting it into the other +sleep states, because it involves creating and saving a system image. Therefore there are more phases for hibernation, with a different set of callbacks. These phases always run after tasks have been frozen and memory has been freed. @@ -485,8 +486,8 @@ image forms an atomic snapshot of the system state. At this point the system image is saved, and the devices then need to be prepared for the upcoming system shutdown. This is much like suspending them -before putting the system into the standby or memory sleep state, and the phases -are similar. +before putting the system into the freeze, standby or memory sleep state, +and the phases are similar. 9. The prepare phase is discussed above. diff --git a/Documentation/power/interface.txt b/Documentation/power/interface.txt index c537834..f1f0f59a 100644 --- a/Documentation/power/interface.txt +++ b/Documentation/power/interface.txt @@ -7,8 +7,8 @@ running. The interface exists in /sys/power/ directory (assuming sysfs is mounted at /sys). /sys/power/state controls system power state. Reading from this file -returns what states are supported, which is hard-coded to 'standby' -(Power-On Suspend), 'mem' (Suspend-to-RAM), and 'disk' +returns what states are supported, which is hard-coded to 'freeze', +'standby' (Power-On Suspend), 'mem' (Suspend-to-RAM), and 'disk' (Suspend-to-Disk). Writing to this file one of those strings causes the system to diff --git a/Documentation/power/states.txt b/Documentation/power/states.txt index 4416b28..42f28b7 100644 --- a/Documentation/power/states.txt +++ b/Documentation/power/states.txt @@ -2,12 +2,26 @@ System Power Management States -The kernel supports three power management states generically, though -each is dependent on platform support code to implement the low-level -details for each state. This file describes each state, what they are +The kernel supports four power management states generically, though +one is generic and the other three are dependent on platform support +code to implement the low-level details for each state. +This file describes each state, what they are commonly called, what ACPI state they map to, and what string to write to /sys/power/state to enter that state +state: Freeze / Low-Power Idle +ACPI state: S0 +String: "freeze" + +This state is a generic, pure software, light-weight, low-power state. +It allows more energy to be saved relative to idle by freezing user +space and putting all I/O devices into low-power states (possibly +lower-power than available at run time), such that the processors can +spend more time in their idle states. +This state can be used for platforms without Standby/Suspend-to-RAM +support, or it can be used in addition to Suspend-to-RAM (memory sleep) +to provide reduced resume latency. + State: Standby / Power-On Suspend ACPI State: S1 -- cgit v0.10.2 From 86fd03d1607525af3926ff0a299b16c51fa4221b Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 13 May 2013 02:42:12 +0000 Subject: PM / Documentation: remove inaccurate suspend/hibernate transition lantency statement The lantency of the transition from suspend and hibernate is platform-dependent. Thus we should not refer the lantency in the documentation. Signed-off-by: Zhang Rui Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/power/states.txt b/Documentation/power/states.txt index 42f28b7..442d43d 100644 --- a/Documentation/power/states.txt +++ b/Documentation/power/states.txt @@ -36,9 +36,6 @@ We try to put devices in a low-power state equivalent to D1, which also offers low power savings, but low resume latency. Not all devices support D1, and those that don't are left on. -A transition from Standby to the On state should take about 1-2 -seconds. - State: Suspend-to-RAM ACPI State: S3 @@ -56,9 +53,6 @@ transition back to the On state. For at least ACPI, STR requires some minimal boot-strapping code to resume the system from STR. This may be true on other platforms. -A transition from Suspend-to-RAM to the On state should take about -3-5 seconds. - State: Suspend-to-disk ACPI State: S4 @@ -88,7 +82,3 @@ low-power state (like ACPI S4), or it may simply power down. Powering down offers greater savings, and allows this mechanism to work on any system. However, entering a real low-power state allows the user to trigger wake up events (e.g. pressing a key or opening a laptop lid). - -A transition from Suspend-to-Disk to the On state should take about 30 -seconds, though it's typically a bit more with the current -implementation. -- cgit v0.10.2 From 6bc08ed02385378d8c84410fb407fe5640834350 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Mon, 13 May 2013 12:00:03 +0000 Subject: PM / hibernate: Correct documentation Correct the meaning of PM_HIBERNATION_PREPARE in the docs. References: http://lkml.kernel.org/r/20130512162717.GA6305@pd.tnic Signed-off-by: Borislav Petkov Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/power/notifiers.txt b/Documentation/power/notifiers.txt index c2a4a34..a81fa25 100644 --- a/Documentation/power/notifiers.txt +++ b/Documentation/power/notifiers.txt @@ -15,8 +15,10 @@ A suspend/hibernation notifier may be used for this purpose. The subsystems or drivers having such needs can register suspend notifiers that will be called upon the following events by the PM core: -PM_HIBERNATION_PREPARE The system is going to hibernate or suspend, tasks will - be frozen immediately. +PM_HIBERNATION_PREPARE The system is going to hibernate, tasks will be frozen + immediately. This is different from PM_SUSPEND_PREPARE + below because here we do additional work between notifiers + and drivers freezing. PM_POST_HIBERNATION The system memory state has been restored from a hibernation image or an error occurred during -- cgit v0.10.2 From 286233e604d79f0c7fa04abec2180d5d89a74749 Mon Sep 17 00:00:00 2001 From: Horia Geanta Date: Fri, 10 May 2013 15:08:39 +0300 Subject: crypto: caam - fix inconsistent assoc dma mapping direction req->assoc is dma mapped BIDIRECTIONAL and unmapped TO_DEVICE. Since it is read-only for the device, use TO_DEVICE both for mapping and unmapping. Cc: # 3.9, 3.8 Signed-off-by: Horia Geanta Signed-off-by: Herbert Xu diff --git a/drivers/crypto/caam/caamalg.c b/drivers/crypto/caam/caamalg.c index 765fdf5..bf416a8 100644 --- a/drivers/crypto/caam/caamalg.c +++ b/drivers/crypto/caam/caamalg.c @@ -1154,7 +1154,7 @@ static struct aead_edesc *aead_edesc_alloc(struct aead_request *req, dst_nents = sg_count(req->dst, req->cryptlen, &dst_chained); sgc = dma_map_sg_chained(jrdev, req->assoc, assoc_nents ? : 1, - DMA_BIDIRECTIONAL, assoc_chained); + DMA_TO_DEVICE, assoc_chained); if (likely(req->src == req->dst)) { sgc = dma_map_sg_chained(jrdev, req->src, src_nents ? : 1, DMA_BIDIRECTIONAL, src_chained); @@ -1336,7 +1336,7 @@ static struct aead_edesc *aead_giv_edesc_alloc(struct aead_givcrypt_request dst_nents = sg_count(req->dst, req->cryptlen, &dst_chained); sgc = dma_map_sg_chained(jrdev, req->assoc, assoc_nents ? : 1, - DMA_BIDIRECTIONAL, assoc_chained); + DMA_TO_DEVICE, assoc_chained); if (likely(req->src == req->dst)) { sgc = dma_map_sg_chained(jrdev, req->src, src_nents ? : 1, DMA_BIDIRECTIONAL, src_chained); -- cgit v0.10.2 From 613e60a66181acc5c8b63268e939622162da2393 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Sat, 11 May 2013 22:33:19 +0000 Subject: powerpc/mm: Use the correct mask value when looking at pgtable address Our pgtable are 2*sizeof(pte_t)*PTRS_PER_PTE which is PTE_FRAG_SIZE. Instead of depending on frag size, mask with PMD_MASKED_BITS. Signed-off-by: Aneesh Kumar K.V Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/include/asm/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h index 91acb12..b66ae72 100644 --- a/arch/powerpc/include/asm/pgalloc-64.h +++ b/arch/powerpc/include/asm/pgalloc-64.h @@ -186,7 +186,7 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, static inline pgtable_t pmd_pgtable(pmd_t pmd) { - return (pgtable_t)(pmd_val(pmd) & -sizeof(pte_t)*PTRS_PER_PTE); + return (pgtable_t)(pmd_val(pmd) & ~PMD_MASKED_BITS); } static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, -- cgit v0.10.2 From 83d5e64b7efa7f39b10ff5e92792e807a720289c Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Mon, 6 May 2013 10:51:00 +0000 Subject: powerpc: Fix build errors STRICT_MM_TYPECHECKS Signed-off-by: Aneesh Kumar K.V Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/include/asm/pte-hash64-64k.h b/arch/powerpc/include/asm/pte-hash64-64k.h index 3e13e23..d836d94 100644 --- a/arch/powerpc/include/asm/pte-hash64-64k.h +++ b/arch/powerpc/include/asm/pte-hash64-64k.h @@ -47,7 +47,7 @@ * generic accessors and iterators here */ #define __real_pte(e,p) ((real_pte_t) { \ - (e), ((e) & _PAGE_COMBO) ? \ + (e), (pte_val(e) & _PAGE_COMBO) ? \ (pte_val(*((p) + PTRS_PER_PTE))) : 0 }) #define __rpte_to_hidx(r,index) ((pte_val((r).pte) & _PAGE_COMBO) ? \ (((r).hidx >> ((index)<<2)) & 0xf) : ((pte_val((r).pte) >> 12) & 0xf)) diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index f5c5c90..6053f03 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -359,7 +359,6 @@ static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp, enum pci_mmap_state mmap_state, int write_combine) { - unsigned long prot = pgprot_val(protection); /* Write combine is always 0 on non-memory space mappings. On * memory space, if the user didn't pass 1, we check for a @@ -376,9 +375,9 @@ static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp, /* XXX would be nice to have a way to ask for write-through */ if (write_combine) - return pgprot_noncached_wc(prot); + return pgprot_noncached_wc(protection); else - return pgprot_noncached(prot); + return pgprot_noncached(protection); } /* diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index c2787bf..a90b9c4 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -215,7 +215,8 @@ static void __meminit vmemmap_create_mapping(unsigned long start, unsigned long phys) { int mapped = htab_bolt_mapping(start, start + page_size, phys, - PAGE_KERNEL, mmu_vmemmap_psize, + pgprot_val(PAGE_KERNEL), + mmu_vmemmap_psize, mmu_kernel_ssize); BUG_ON(mapped < 0); } -- cgit v0.10.2 From 79c66ce8f6448a3295a32efeac88c9debd7f7094 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sun, 12 May 2013 15:04:53 +0000 Subject: powerpc/kexec: Fix kexec when using VMX optimised memcpy commit b3f271e86e5a (powerpc: POWER7 optimised memcpy using VMX and enhanced prefetch) uses VMX when it is safe to do so (ie not in interrupt). It also looks at the task struct to decide if we have to save the current tasks' VMX state. kexec calls memcpy() at a point where the task struct may have been overwritten by the new kexec segments. If it has been overwritten then when memcpy -> enable_altivec looks up current->thread.regs->msr we get a cryptic oops or lockup. I also notice we aren't initialising thread_info->cpu, which means smp_processor_id is broken. Fix that too. Signed-off-by: Anton Blanchard Cc: # 3.6+ Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c index 466a290..611acdf 100644 --- a/arch/powerpc/kernel/machine_kexec_64.c +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -335,10 +336,13 @@ void default_machine_kexec(struct kimage *image) pr_debug("kexec: Starting switchover sequence.\n"); /* switch to a staticly allocated stack. Based on irq stack code. + * We setup preempt_count to avoid using VMX in memcpy. * XXX: the task struct will likely be invalid once we do the copy! */ kexec_stack.thread_info.task = current_thread_info()->task; kexec_stack.thread_info.flags = 0; + kexec_stack.thread_info.preempt_count = HARDIRQ_OFFSET; + kexec_stack.thread_info.cpu = current_thread_info()->cpu; /* We need a static PACA, too; copy this CPU's PACA over and switch to * it. Also poison per_cpu_offset to catch anyone using non-static -- cgit v0.10.2 From a94a14720eaf55c5f06d6ca7ecbe3f87f6864fc6 Mon Sep 17 00:00:00 2001 From: Vasant Hegde Date: Tue, 7 May 2013 16:54:47 +0000 Subject: powerpc/rtas_flash: Fix validate_flash buffer overflow issue ibm,validate-flash-image RTAS call output buffer contains 150 - 200 bytes of data on latest system. Presently we have output buffer size as 64 bytes and we use sprintf to copy data from RTAS buffer to local buffer. This causes kernel oops (see below call trace). This patch increases local buffer size to 256 and also uses snprintf instead of sprintf to copy data from RTAS buffer. Kernel call trace : ------------------- Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=1024 NUMA pSeries Modules linked in: nfs fscache lockd auth_rpcgss nfs_acl sunrpc fuse loop dm_mod ipv6 ipv6_lib usb_storage ehea(X) sr_mod qlge ses cdrom enclosure st be2net sg ext3 jbd mbcache usbhid hid ohci_hcd ehci_hcd usbcore qla2xxx usb_common sd_mod crc_t10dif scsi_dh_hp_sw scsi_dh_rdac scsi_dh_alua scsi_dh_emc scsi_dh lpfc scsi_transport_fc scsi_tgt ipr(X) libata scsi_mod Supported: Yes NIP: 4520323031333130 LR: 4520323031333130 CTR: 0000000000000000 REGS: c0000001b91779b0 TRAP: 0400 Tainted: G X (3.0.13-0.27-ppc64) MSR: 8000000040009032 CR: 44022488 XER: 20000018 TASK = c0000001bca1aba0[4736] 'cat' THREAD: c0000001b9174000 CPU: 36 GPR00: 4520323031333130 c0000001b9177c30 c000000000f87c98 000000000000009b GPR04: c0000001b9177c4a 000000000000000b 3520323031333130 2032303133313031 GPR08: 3133313031350a4d 000000000000009b 0000000000000000 c0000000003664a4 GPR12: 0000000022022448 c000000003ee6c00 0000000000000002 00000000100e8a90 GPR16: 00000000100cb9d8 0000000010093370 000000001001d310 0000000000000000 GPR20: 0000000000008000 00000000100fae60 000000000000005e 0000000000000000 GPR24: 0000000010129350 46573738302e3030 2046573738302e30 300a4d4720323031 GPR28: 333130313520554e 4b4e4f574e0a4d47 2032303133313031 3520323031333130 NIP [4520323031333130] 0x4520323031333130 LR [4520323031333130] 0x4520323031333130 Call Trace: [c0000001b9177c30] [4520323031333130] 0x4520323031333130 (unreliable) Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX Signed-off-by: Vasant Hegde Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c index 5b30224..2f3cdb0 100644 --- a/arch/powerpc/kernel/rtas_flash.c +++ b/arch/powerpc/kernel/rtas_flash.c @@ -89,6 +89,7 @@ /* Array sizes */ #define VALIDATE_BUF_SIZE 4096 +#define VALIDATE_MSG_LEN 256 #define RTAS_MSG_MAXLEN 64 /* Quirk - RTAS requires 4k list length and block size */ @@ -466,7 +467,7 @@ static void validate_flash(struct rtas_validate_flash_t *args_buf) } static int get_validate_flash_msg(struct rtas_validate_flash_t *args_buf, - char *msg) + char *msg, int msglen) { int n; @@ -474,7 +475,8 @@ static int get_validate_flash_msg(struct rtas_validate_flash_t *args_buf, n = sprintf(msg, "%d\n", args_buf->update_results); if ((args_buf->update_results >= VALIDATE_CUR_UNKNOWN) || (args_buf->update_results == VALIDATE_TMP_UPDATE)) - n += sprintf(msg + n, "%s\n", args_buf->buf); + n += snprintf(msg + n, msglen - n, "%s\n", + args_buf->buf); } else { n = sprintf(msg, "%d\n", args_buf->status); } @@ -486,11 +488,11 @@ static ssize_t validate_flash_read(struct file *file, char __user *buf, { struct rtas_validate_flash_t *const args_buf = &rtas_validate_flash_data; - char msg[RTAS_MSG_MAXLEN]; + char msg[VALIDATE_MSG_LEN]; int msglen; mutex_lock(&rtas_validate_flash_mutex); - msglen = get_validate_flash_msg(args_buf, msg); + msglen = get_validate_flash_msg(args_buf, msg, VALIDATE_MSG_LEN); mutex_unlock(&rtas_validate_flash_mutex); return simple_read_from_buffer(buf, count, ppos, msg, msglen); -- cgit v0.10.2 From 120496ac2d2d60aee68d3123a68169502a85f4b5 Mon Sep 17 00:00:00 2001 From: Robert Jennings Date: Tue, 7 May 2013 04:34:11 +0000 Subject: powerpc: Bring all threads online prior to migration/hibernation This patch brings online all threads which are present but not online prior to migration/hibernation. After migration/hibernation those threads are taken back offline. During migration/hibernation all online CPUs must call H_JOIN, this is required by the hypervisor. Without this patch, threads that are offline (H_CEDE'd) will not be woken to make the H_JOIN call and the OS will be deadlocked (all threads either JOIN'd or CEDE'd). Cc: Signed-off-by: Robert Jennings Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h index a8bc2bb..34fd704 100644 --- a/arch/powerpc/include/asm/rtas.h +++ b/arch/powerpc/include/asm/rtas.h @@ -264,6 +264,8 @@ extern void rtas_progress(char *s, unsigned short hex); extern void rtas_initialize(void); extern int rtas_suspend_cpu(struct rtas_suspend_me_data *data); extern int rtas_suspend_last_cpu(struct rtas_suspend_me_data *data); +extern int rtas_online_cpus_mask(cpumask_var_t cpus); +extern int rtas_offline_cpus_mask(cpumask_var_t cpus); extern int rtas_ibm_suspend_me(struct rtas_args *); struct rtc_time; diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 1fd6e7b..52add6f 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -807,6 +808,95 @@ static void rtas_percpu_suspend_me(void *info) __rtas_suspend_cpu((struct rtas_suspend_me_data *)info, 1); } +enum rtas_cpu_state { + DOWN, + UP, +}; + +#ifndef CONFIG_SMP +static int rtas_cpu_state_change_mask(enum rtas_cpu_state state, + cpumask_var_t cpus) +{ + if (!cpumask_empty(cpus)) { + cpumask_clear(cpus); + return -EINVAL; + } else + return 0; +} +#else +/* On return cpumask will be altered to indicate CPUs changed. + * CPUs with states changed will be set in the mask, + * CPUs with status unchanged will be unset in the mask. */ +static int rtas_cpu_state_change_mask(enum rtas_cpu_state state, + cpumask_var_t cpus) +{ + int cpu; + int cpuret = 0; + int ret = 0; + + if (cpumask_empty(cpus)) + return 0; + + for_each_cpu(cpu, cpus) { + switch (state) { + case DOWN: + cpuret = cpu_down(cpu); + break; + case UP: + cpuret = cpu_up(cpu); + break; + } + if (cpuret) { + pr_debug("%s: cpu_%s for cpu#%d returned %d.\n", + __func__, + ((state == UP) ? "up" : "down"), + cpu, cpuret); + if (!ret) + ret = cpuret; + if (state == UP) { + /* clear bits for unchanged cpus, return */ + cpumask_shift_right(cpus, cpus, cpu); + cpumask_shift_left(cpus, cpus, cpu); + break; + } else { + /* clear bit for unchanged cpu, continue */ + cpumask_clear_cpu(cpu, cpus); + } + } + } + + return ret; +} +#endif + +int rtas_online_cpus_mask(cpumask_var_t cpus) +{ + int ret; + + ret = rtas_cpu_state_change_mask(UP, cpus); + + if (ret) { + cpumask_var_t tmp_mask; + + if (!alloc_cpumask_var(&tmp_mask, GFP_TEMPORARY)) + return ret; + + /* Use tmp_mask to preserve cpus mask from first failure */ + cpumask_copy(tmp_mask, cpus); + rtas_offline_cpus_mask(tmp_mask); + free_cpumask_var(tmp_mask); + } + + return ret; +} +EXPORT_SYMBOL(rtas_online_cpus_mask); + +int rtas_offline_cpus_mask(cpumask_var_t cpus) +{ + return rtas_cpu_state_change_mask(DOWN, cpus); +} +EXPORT_SYMBOL(rtas_offline_cpus_mask); + int rtas_ibm_suspend_me(struct rtas_args *args) { long state; @@ -814,6 +904,8 @@ int rtas_ibm_suspend_me(struct rtas_args *args) unsigned long retbuf[PLPAR_HCALL_BUFSIZE]; struct rtas_suspend_me_data data; DECLARE_COMPLETION_ONSTACK(done); + cpumask_var_t offline_mask; + int cpuret; if (!rtas_service_present("ibm,suspend-me")) return -ENOSYS; @@ -837,11 +929,24 @@ int rtas_ibm_suspend_me(struct rtas_args *args) return 0; } + if (!alloc_cpumask_var(&offline_mask, GFP_TEMPORARY)) + return -ENOMEM; + atomic_set(&data.working, 0); atomic_set(&data.done, 0); atomic_set(&data.error, 0); data.token = rtas_token("ibm,suspend-me"); data.complete = &done; + + /* All present CPUs must be online */ + cpumask_andnot(offline_mask, cpu_present_mask, cpu_online_mask); + cpuret = rtas_online_cpus_mask(offline_mask); + if (cpuret) { + pr_err("%s: Could not bring present CPUs online.\n", __func__); + atomic_set(&data.error, cpuret); + goto out; + } + stop_topology_update(); /* Call function on all CPUs. One of us will make the @@ -857,6 +962,14 @@ int rtas_ibm_suspend_me(struct rtas_args *args) start_topology_update(); + /* Take down CPUs not online prior to suspend */ + cpuret = rtas_offline_cpus_mask(offline_mask); + if (cpuret) + pr_warn("%s: Could not restore CPUs to offline state.\n", + __func__); + +out: + free_cpumask_var(offline_mask); return atomic_read(&data.error); } #else /* CONFIG_PPC_PSERIES */ diff --git a/arch/powerpc/platforms/pseries/suspend.c b/arch/powerpc/platforms/pseries/suspend.c index 47226e0..5f997e7 100644 --- a/arch/powerpc/platforms/pseries/suspend.c +++ b/arch/powerpc/platforms/pseries/suspend.c @@ -16,6 +16,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include #include #include #include @@ -126,11 +127,15 @@ static ssize_t store_hibernate(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { + cpumask_var_t offline_mask; int rc; if (!capable(CAP_SYS_ADMIN)) return -EPERM; + if (!alloc_cpumask_var(&offline_mask, GFP_TEMPORARY)) + return -ENOMEM; + stream_id = simple_strtoul(buf, NULL, 16); do { @@ -140,15 +145,32 @@ static ssize_t store_hibernate(struct device *dev, } while (rc == -EAGAIN); if (!rc) { + /* All present CPUs must be online */ + cpumask_andnot(offline_mask, cpu_present_mask, + cpu_online_mask); + rc = rtas_online_cpus_mask(offline_mask); + if (rc) { + pr_err("%s: Could not bring present CPUs online.\n", + __func__); + goto out; + } + stop_topology_update(); rc = pm_suspend(PM_SUSPEND_MEM); start_topology_update(); + + /* Take down CPUs not online prior to suspend */ + if (!rtas_offline_cpus_mask(offline_mask)) + pr_warn("%s: Could not restore CPUs to offline " + "state.\n", __func__); } stream_id = 0; if (!rc) rc = count; +out: + free_cpumask_var(offline_mask); return rc; } -- cgit v0.10.2 From b80ec3dc8e100f6c8b27c02cbb6079d401c3a054 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Mon, 6 May 2013 18:43:39 +0000 Subject: powerpc: Make CONFIG_RTAS_PROC depend on CONFIG_PROC_FS We are getting build errors with CONFIG_PROC_FS=n: arch/powerpc/kernel/rtas_flash.c In function 'rtas_flash_init': 745:33: error: unused variable 'f' [-Werror=unused-variable] But rtas_flash.c should not be built when CONFIG_PROC_FS=n, beacause all it does is provide a /proc interface to the RTAS flash routines. CONFIG_RTAS_FLASH already depends on CONFIG_RTAS_PROC, to indicate that it depends on the RTAS proc support, but CONFIG_RTAS_PROC does not depend on CONFIG_PROC_FS. So fix that. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 34d224b..632444f 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -128,7 +128,7 @@ config PPC_RTAS_DAEMON config RTAS_PROC bool "Proc interface to RTAS" - depends on PPC_RTAS + depends on PPC_RTAS && PROC_FS default y config RTAS_FLASH -- cgit v0.10.2 From af945cf4bfc6586f0739b8c7f67af75576dec25e Mon Sep 17 00:00:00 2001 From: Li Zhong Date: Mon, 6 May 2013 22:44:41 +0000 Subject: powerpc: Fix MAX_STACK_TRACE_ENTRIES too low warning again Saw this warning again, and this time from the ret_from_fork path. It seems we could clear the back chain earlier in copy_thread(), which could cover both path, and also fix potential lockdep usage in schedule_tail(), or exception occurred before we clear the back chain. Signed-off-by: Li Zhong Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index e514de5..d22e73e 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -439,8 +439,6 @@ ret_from_fork: ret_from_kernel_thread: REST_NVGPRS(r1) bl schedule_tail - li r3,0 - stw r3,0(r1) mtlr r14 mr r3,r15 PPC440EP_ERR42 diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 3fe5259..48e8a86 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -376,8 +376,6 @@ _GLOBAL(ret_from_fork) _GLOBAL(ret_from_kernel_thread) bl .schedule_tail REST_NVGPRS(r1) - li r3,0 - std r3,0(r1) ld r14, 0(r14) mtlr r14 mr r3,r15 diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index ceb4e7b..21981a8 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -971,6 +971,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, * do some house keeping and then return from the fork or clone * system call, using the stack frame created above. */ + ((unsigned long *)sp)[0] = 0; sp -= sizeof(struct pt_regs); kregs = (struct pt_regs *) sp; sp -= STACK_FRAME_OVERHEAD; -- cgit v0.10.2 From ee8209fd026b074bb8eb75bece516a338a281b1b Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 8 May 2013 11:55:48 +0300 Subject: dma: acpi-dma: parse CSRT to extract additional resources Since we have CSRT only to get additional DMA controller resources, let's get rid of drivers/acpi/csrt.c and move its logic inside ACPI DMA helpers code. Signed-off-by: Andy Shevchenko Signed-off-by: Mika Westerberg Acked-by: Rafael J. Wysocki Signed-off-by: Vinod Koul diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index ecb743b..6050c80 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -38,7 +38,6 @@ acpi-y += processor_core.o acpi-y += ec.o acpi-$(CONFIG_ACPI_DOCK) += dock.o acpi-y += pci_root.o pci_link.o pci_irq.o -acpi-y += csrt.o acpi-$(CONFIG_X86_INTEL_LPSS) += acpi_lpss.o acpi-y += acpi_platform.o acpi-y += power.o diff --git a/drivers/acpi/csrt.c b/drivers/acpi/csrt.c deleted file mode 100644 index 5c15a91..0000000 --- a/drivers/acpi/csrt.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * Support for Core System Resources Table (CSRT) - * - * Copyright (C) 2013, Intel Corporation - * Authors: Mika Westerberg - * Andy Shevchenko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#define pr_fmt(fmt) "ACPI: CSRT: " fmt - -#include -#include -#include -#include -#include -#include - -ACPI_MODULE_NAME("CSRT"); - -static int __init acpi_csrt_parse_shared_info(struct platform_device *pdev, - const struct acpi_csrt_group *grp) -{ - const struct acpi_csrt_shared_info *si; - struct resource res[3]; - size_t nres; - int ret; - - memset(res, 0, sizeof(res)); - nres = 0; - - si = (const struct acpi_csrt_shared_info *)&grp[1]; - /* - * The peripherals that are listed on CSRT typically support only - * 32-bit addresses so we only use the low part of MMIO base for - * now. - */ - if (!si->mmio_base_high && si->mmio_base_low) { - /* - * There is no size of the memory resource in shared_info - * so we assume that it is 4k here. - */ - res[nres].start = si->mmio_base_low; - res[nres].end = res[0].start + SZ_4K - 1; - res[nres++].flags = IORESOURCE_MEM; - } - - if (si->gsi_interrupt) { - int irq = acpi_register_gsi(NULL, si->gsi_interrupt, - si->interrupt_mode, - si->interrupt_polarity); - res[nres].start = irq; - res[nres].end = irq; - res[nres++].flags = IORESOURCE_IRQ; - } - - if (si->base_request_line || si->num_handshake_signals) { - /* - * We pass the driver a DMA resource describing the range - * of request lines the device supports. - */ - res[nres].start = si->base_request_line; - res[nres].end = res[nres].start + si->num_handshake_signals - 1; - res[nres++].flags = IORESOURCE_DMA; - } - - ret = platform_device_add_resources(pdev, res, nres); - if (ret) { - if (si->gsi_interrupt) - acpi_unregister_gsi(si->gsi_interrupt); - return ret; - } - - return 0; -} - -static int __init -acpi_csrt_parse_resource_group(const struct acpi_csrt_group *grp) -{ - struct platform_device *pdev; - char vendor[5], name[16]; - int ret, i; - - vendor[0] = grp->vendor_id; - vendor[1] = grp->vendor_id >> 8; - vendor[2] = grp->vendor_id >> 16; - vendor[3] = grp->vendor_id >> 24; - vendor[4] = '\0'; - - if (grp->shared_info_length != sizeof(struct acpi_csrt_shared_info)) - return -ENODEV; - - snprintf(name, sizeof(name), "%s%04X", vendor, grp->device_id); - pdev = platform_device_alloc(name, PLATFORM_DEVID_AUTO); - if (!pdev) - return -ENOMEM; - - /* Add resources based on the shared info */ - ret = acpi_csrt_parse_shared_info(pdev, grp); - if (ret) - goto fail; - - ret = platform_device_add(pdev); - if (ret) - goto fail; - - for (i = 0; i < pdev->num_resources; i++) - dev_dbg(&pdev->dev, "%pR\n", &pdev->resource[i]); - - return 0; - -fail: - platform_device_put(pdev); - return ret; -} - -/* - * CSRT or Core System Resources Table is a proprietary ACPI table - * introduced by Microsoft. This table can contain devices that are not in - * the system DSDT table. In particular DMA controllers might be described - * here. - * - * We present these devices as normal platform devices that don't have ACPI - * IDs or handle. The platform device name will be something like - * ..auto for example: INTL9C06.0.auto. - */ -void __init acpi_csrt_init(void) -{ - struct acpi_csrt_group *grp, *end; - struct acpi_table_csrt *csrt; - acpi_status status; - int ret; - - status = acpi_get_table(ACPI_SIG_CSRT, 0, - (struct acpi_table_header **)&csrt); - if (ACPI_FAILURE(status)) { - if (status != AE_NOT_FOUND) - pr_warn("failed to get the CSRT table\n"); - return; - } - - pr_debug("parsing CSRT table for devices\n"); - - grp = (struct acpi_csrt_group *)(csrt + 1); - end = (struct acpi_csrt_group *)((void *)csrt + csrt->header.length); - - while (grp < end) { - ret = acpi_csrt_parse_resource_group(grp); - if (ret) { - pr_warn("error in parsing resource group: %d\n", ret); - return; - } - - grp = (struct acpi_csrt_group *)((void *)grp + grp->length); - } -} diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index 6f1afd9..297cbf4 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -35,7 +35,6 @@ void acpi_pci_link_init(void); void acpi_pci_root_hp_init(void); void acpi_platform_init(void); int acpi_sysfs_init(void); -void acpi_csrt_init(void); #ifdef CONFIG_ACPI_CONTAINER void acpi_container_init(void); #else diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index fe158fd..aacc08f 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -2042,7 +2042,6 @@ int __init acpi_scan_init(void) acpi_pci_link_init(); acpi_platform_init(); acpi_lpss_init(); - acpi_csrt_init(); acpi_container_init(); acpi_memory_hotplug_init(); diff --git a/drivers/dma/acpi-dma.c b/drivers/dma/acpi-dma.c index ba6fc62..5a18f82 100644 --- a/drivers/dma/acpi-dma.c +++ b/drivers/dma/acpi-dma.c @@ -4,7 +4,8 @@ * Based on of-dma.c * * Copyright (C) 2013, Intel Corporation - * Author: Andy Shevchenko + * Authors: Andy Shevchenko + * Mika Westerberg * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -16,6 +17,7 @@ #include #include #include +#include #include #include @@ -23,6 +25,117 @@ static LIST_HEAD(acpi_dma_list); static DEFINE_MUTEX(acpi_dma_lock); /** + * acpi_dma_parse_resource_group - match device and parse resource group + * @grp: CSRT resource group + * @adev: ACPI device to match with + * @adma: struct acpi_dma of the given DMA controller + * + * Returns 1 on success, 0 when no information is available, or appropriate + * errno value on error. + * + * In order to match a device from DSDT table to the corresponding CSRT device + * we use MMIO address and IRQ. + */ +static int acpi_dma_parse_resource_group(const struct acpi_csrt_group *grp, + struct acpi_device *adev, struct acpi_dma *adma) +{ + const struct acpi_csrt_shared_info *si; + struct list_head resource_list; + struct resource_list_entry *rentry; + resource_size_t mem = 0, irq = 0; + u32 vendor_id; + int ret; + + if (grp->shared_info_length != sizeof(struct acpi_csrt_shared_info)) + return -ENODEV; + + INIT_LIST_HEAD(&resource_list); + ret = acpi_dev_get_resources(adev, &resource_list, NULL, NULL); + if (ret <= 0) + return 0; + + list_for_each_entry(rentry, &resource_list, node) { + if (resource_type(&rentry->res) == IORESOURCE_MEM) + mem = rentry->res.start; + else if (resource_type(&rentry->res) == IORESOURCE_IRQ) + irq = rentry->res.start; + } + + acpi_dev_free_resource_list(&resource_list); + + /* Consider initial zero values as resource not found */ + if (mem == 0 && irq == 0) + return 0; + + si = (const struct acpi_csrt_shared_info *)&grp[1]; + + /* Match device by MMIO and IRQ */ + if (si->mmio_base_low != mem || si->gsi_interrupt != irq) + return 0; + + vendor_id = le32_to_cpu(grp->vendor_id); + dev_dbg(&adev->dev, "matches with %.4s%04X (rev %u)\n", + (char *)&vendor_id, grp->device_id, grp->revision); + + /* Check if the request line range is available */ + if (si->base_request_line == 0 && si->num_handshake_signals == 0) + return 0; + + adma->base_request_line = si->base_request_line; + adma->end_request_line = si->base_request_line + + si->num_handshake_signals - 1; + + dev_dbg(&adev->dev, "request line base: 0x%04x end: 0x%04x\n", + adma->base_request_line, adma->end_request_line); + + return 1; +} + +/** + * acpi_dma_parse_csrt - parse CSRT to exctract additional DMA resources + * @adev: ACPI device to match with + * @adma: struct acpi_dma of the given DMA controller + * + * CSRT or Core System Resources Table is a proprietary ACPI table + * introduced by Microsoft. This table can contain devices that are not in + * the system DSDT table. In particular DMA controllers might be described + * here. + * + * We are using this table to get the request line range of the specific DMA + * controller to be used later. + * + */ +static void acpi_dma_parse_csrt(struct acpi_device *adev, struct acpi_dma *adma) +{ + struct acpi_csrt_group *grp, *end; + struct acpi_table_csrt *csrt; + acpi_status status; + int ret; + + status = acpi_get_table(ACPI_SIG_CSRT, 0, + (struct acpi_table_header **)&csrt); + if (ACPI_FAILURE(status)) { + if (status != AE_NOT_FOUND) + dev_warn(&adev->dev, "failed to get the CSRT table\n"); + return; + } + + grp = (struct acpi_csrt_group *)(csrt + 1); + end = (struct acpi_csrt_group *)((void *)csrt + csrt->header.length); + + while (grp < end) { + ret = acpi_dma_parse_resource_group(grp, adev, adma); + if (ret < 0) { + dev_warn(&adev->dev, + "error in parsing resource group\n"); + return; + } + + grp = (struct acpi_csrt_group *)((void *)grp + grp->length); + } +} + +/** * acpi_dma_controller_register - Register a DMA controller to ACPI DMA helpers * @dev: struct device of DMA controller * @acpi_dma_xlate: translation function which converts a dma specifier @@ -61,6 +174,8 @@ int acpi_dma_controller_register(struct device *dev, adma->acpi_dma_xlate = acpi_dma_xlate; adma->data = data; + acpi_dma_parse_csrt(adev, adma); + /* Now queue acpi_dma controller structure in list */ mutex_lock(&acpi_dma_lock); list_add_tail(&adma->dma_controllers, &acpi_dma_list); @@ -149,6 +264,45 @@ void devm_acpi_dma_controller_free(struct device *dev) } EXPORT_SYMBOL_GPL(devm_acpi_dma_controller_free); +/** + * acpi_dma_update_dma_spec - prepare dma specifier to pass to translation function + * @adma: struct acpi_dma of DMA controller + * @dma_spec: dma specifier to update + * + * Returns 0, if no information is avaiable, -1 on mismatch, and 1 otherwise. + * + * Accordingly to ACPI 5.0 Specification Table 6-170 "Fixed DMA Resource + * Descriptor": + * DMA Request Line bits is a platform-relative number uniquely + * identifying the request line assigned. Request line-to-Controller + * mapping is done in a controller-specific OS driver. + * That's why we can safely adjust slave_id when the appropriate controller is + * found. + */ +static int acpi_dma_update_dma_spec(struct acpi_dma *adma, + struct acpi_dma_spec *dma_spec) +{ + /* Set link to the DMA controller device */ + dma_spec->dev = adma->dev; + + /* Check if the request line range is available */ + if (adma->base_request_line == 0 && adma->end_request_line == 0) + return 0; + + /* Check if slave_id falls to the range */ + if (dma_spec->slave_id < adma->base_request_line || + dma_spec->slave_id > adma->end_request_line) + return -1; + + /* + * Here we adjust slave_id. It should be a relative number to the base + * request line. + */ + dma_spec->slave_id -= adma->base_request_line; + + return 1; +} + struct acpi_dma_parser_data { struct acpi_dma_spec dma_spec; size_t index; @@ -193,6 +347,7 @@ struct dma_chan *acpi_dma_request_slave_chan_by_index(struct device *dev, struct acpi_device *adev; struct acpi_dma *adma; struct dma_chan *chan = NULL; + int found; /* Check if the device was enumerated by ACPI */ if (!dev || !ACPI_HANDLE(dev)) @@ -219,9 +374,20 @@ struct dma_chan *acpi_dma_request_slave_chan_by_index(struct device *dev, mutex_lock(&acpi_dma_lock); list_for_each_entry(adma, &acpi_dma_list, dma_controllers) { - dma_spec->dev = adma->dev; + /* + * We are not going to call translation function if slave_id + * doesn't fall to the request range. + */ + found = acpi_dma_update_dma_spec(adma, dma_spec); + if (found < 0) + continue; chan = adma->acpi_dma_xlate(dma_spec, adma); - if (chan) + /* + * Try to get a channel only from the DMA controller that + * matches the slave_id. See acpi_dma_update_dma_spec() + * description for the details. + */ + if (found > 0 || chan) break; } diff --git a/include/linux/acpi_dma.h b/include/linux/acpi_dma.h index d09deab..fb02980 100644 --- a/include/linux/acpi_dma.h +++ b/include/linux/acpi_dma.h @@ -37,6 +37,8 @@ struct acpi_dma_spec { * @dev: struct device of this controller * @acpi_dma_xlate: callback function to find a suitable channel * @data: private data used by a callback function + * @base_request_line: first supported request line (CSRT) + * @end_request_line: last supported request line (CSRT) */ struct acpi_dma { struct list_head dma_controllers; @@ -44,6 +46,8 @@ struct acpi_dma { struct dma_chan *(*acpi_dma_xlate) (struct acpi_dma_spec *, struct acpi_dma *); void *data; + unsigned short base_request_line; + unsigned short end_request_line; }; /* Used with acpi_dma_simple_xlate() */ -- cgit v0.10.2 From b59cc200ac025aca597fb21862c1c9e667f2eff2 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 8 May 2013 11:55:49 +0300 Subject: ACPI / LPSS: register clock device for Lynxpoint DMA properly The DMA controller in Lynxpoint is enumerated as a regular ACPI device now. To work properly it is using the LPSS root clock as a functional clock. That's why we have to register the clock device accordingly to the ACPI ID of the DMA controller. The acpi_lpss.c module is responsible to do the job. This patch also removes hardcoded name of the DMA device in clk-lpt.c and the name of the root clock in acpi_lpss.c. Signed-off-by: Rafael J. Wysocki Signed-off-by: Andy Shevchenko Signed-off-by: Vinod Koul diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index b1c9542..652fd5c 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -35,11 +35,16 @@ ACPI_MODULE_NAME("acpi_lpss"); struct lpss_device_desc { bool clk_required; - const char *clk_parent; + const char *clkdev_name; bool ltr_required; unsigned int prv_offset; }; +static struct lpss_device_desc lpss_dma_desc = { + .clk_required = true, + .clkdev_name = "hclk", +}; + struct lpss_private_data { void __iomem *mmio_base; resource_size_t mmio_size; @@ -49,7 +54,6 @@ struct lpss_private_data { static struct lpss_device_desc lpt_dev_desc = { .clk_required = true, - .clk_parent = "lpss_clk", .prv_offset = 0x800, .ltr_required = true, }; @@ -60,6 +64,9 @@ static struct lpss_device_desc lpt_sdio_dev_desc = { }; static const struct acpi_device_id acpi_lpss_device_ids[] = { + /* Generic LPSS devices */ + { "INTL9C60", (unsigned long)&lpss_dma_desc }, + /* Lynxpoint LPSS devices */ { "INT33C0", (unsigned long)&lpt_dev_desc }, { "INT33C1", (unsigned long)&lpt_dev_desc }, @@ -91,16 +98,27 @@ static int register_device_clock(struct acpi_device *adev, struct lpss_private_data *pdata) { const struct lpss_device_desc *dev_desc = pdata->dev_desc; + struct lpss_clk_data *clk_data; if (!lpss_clk_dev) lpt_register_clock_device(); - if (!dev_desc->clk_parent || !pdata->mmio_base + clk_data = platform_get_drvdata(lpss_clk_dev); + if (!clk_data) + return -ENODEV; + + if (dev_desc->clkdev_name) { + clk_register_clkdev(clk_data->clk, dev_desc->clkdev_name, + dev_name(&adev->dev)); + return 0; + } + + if (!pdata->mmio_base || pdata->mmio_size < dev_desc->prv_offset + LPSS_CLK_SIZE) return -ENODATA; pdata->clk = clk_register_gate(NULL, dev_name(&adev->dev), - dev_desc->clk_parent, 0, + clk_data->name, 0, pdata->mmio_base + dev_desc->prv_offset, 0, 0, NULL); if (IS_ERR(pdata->clk)) diff --git a/drivers/clk/x86/clk-lpt.c b/drivers/clk/x86/clk-lpt.c index 5cf4f46..4f45eee 100644 --- a/drivers/clk/x86/clk-lpt.c +++ b/drivers/clk/x86/clk-lpt.c @@ -15,22 +15,29 @@ #include #include #include +#include #include #define PRV_CLOCK_PARAMS 0x800 static int lpt_clk_probe(struct platform_device *pdev) { + struct lpss_clk_data *drvdata; struct clk *clk; + drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL); + if (!drvdata) + return -ENOMEM; + /* LPSS free running clock */ - clk = clk_register_fixed_rate(&pdev->dev, "lpss_clk", NULL, CLK_IS_ROOT, - 100000000); + drvdata->name = "lpss_clk"; + clk = clk_register_fixed_rate(&pdev->dev, drvdata->name, NULL, + CLK_IS_ROOT, 100000000); if (IS_ERR(clk)) return PTR_ERR(clk); - /* Shared DMA clock */ - clk_register_clkdev(clk, "hclk", "INTL9C60.0.auto"); + drvdata->clk = clk; + platform_set_drvdata(pdev, drvdata); return 0; } diff --git a/include/linux/platform_data/clk-lpss.h b/include/linux/platform_data/clk-lpss.h index 528e73c..2390199 100644 --- a/include/linux/platform_data/clk-lpss.h +++ b/include/linux/platform_data/clk-lpss.h @@ -13,6 +13,11 @@ #ifndef __CLK_LPSS_H #define __CLK_LPSS_H +struct lpss_clk_data { + const char *name; + struct clk *clk; +}; + extern int lpt_clk_init(void); #endif /* __CLK_LPSS_H */ -- cgit v0.10.2 From 75b93da43aa1132bf23dafbb4badb028ccf78129 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 14 May 2013 15:10:02 +1000 Subject: powerpc/powernv: Detect OPAL v3 API version Future firmwares will support that new version Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h index 0df5464..681bc03 100644 --- a/arch/powerpc/include/asm/firmware.h +++ b/arch/powerpc/include/asm/firmware.h @@ -52,6 +52,7 @@ #define FW_FEATURE_BEST_ENERGY ASM_CONST(0x0000000080000000) #define FW_FEATURE_TYPE1_AFFINITY ASM_CONST(0x0000000100000000) #define FW_FEATURE_PRRN ASM_CONST(0x0000000200000000) +#define FW_FEATURE_OPALv3 ASM_CONST(0x0000000400000000) #ifndef __ASSEMBLY__ @@ -69,7 +70,8 @@ enum { FW_FEATURE_SET_MODE | FW_FEATURE_BEST_ENERGY | FW_FEATURE_TYPE1_AFFINITY | FW_FEATURE_PRRN, FW_FEATURE_PSERIES_ALWAYS = 0, - FW_FEATURE_POWERNV_POSSIBLE = FW_FEATURE_OPAL | FW_FEATURE_OPALv2, + FW_FEATURE_POWERNV_POSSIBLE = FW_FEATURE_OPAL | FW_FEATURE_OPALv2 | + FW_FEATURE_OPALv3, FW_FEATURE_POWERNV_ALWAYS = 0, FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1, FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1, diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h index b2906ad..cbb9305 100644 --- a/arch/powerpc/include/asm/opal.h +++ b/arch/powerpc/include/asm/opal.h @@ -243,7 +243,8 @@ enum OpalMCE_TlbErrorType { enum OpalThreadStatus { OPAL_THREAD_INACTIVE = 0x0, - OPAL_THREAD_STARTED = 0x1 + OPAL_THREAD_STARTED = 0x1, + OPAL_THREAD_UNAVAILABLE = 0x2 /* opal-v3 */ }; enum OpalPciBusCompare { diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c index 27907cb..628c564 100644 --- a/arch/powerpc/platforms/powernv/opal.c +++ b/arch/powerpc/platforms/powernv/opal.c @@ -56,7 +56,11 @@ int __init early_init_dt_scan_opal(unsigned long node, opal.entry, entryp, entrysz); powerpc_firmware_features |= FW_FEATURE_OPAL; - if (of_flat_dt_is_compatible(node, "ibm,opal-v2")) { + if (of_flat_dt_is_compatible(node, "ibm,opal-v3")) { + powerpc_firmware_features |= FW_FEATURE_OPALv2; + powerpc_firmware_features |= FW_FEATURE_OPALv3; + printk("OPAL V3 detected !\n"); + } else if (of_flat_dt_is_compatible(node, "ibm,opal-v2")) { powerpc_firmware_features |= FW_FEATURE_OPALv2; printk("OPAL V2 detected !\n"); } else { diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c index c20381c..d4459bf 100644 --- a/arch/powerpc/platforms/powernv/setup.c +++ b/arch/powerpc/platforms/powernv/setup.c @@ -78,7 +78,9 @@ static void pnv_show_cpuinfo(struct seq_file *m) if (root) model = of_get_property(root, "model", NULL); seq_printf(m, "machine\t\t: PowerNV %s\n", model); - if (firmware_has_feature(FW_FEATURE_OPALv2)) + if (firmware_has_feature(FW_FEATURE_OPALv3)) + seq_printf(m, "firmware\t: OPAL v3\n"); + else if (firmware_has_feature(FW_FEATURE_OPALv2)) seq_printf(m, "firmware\t: OPAL v2\n"); else if (firmware_has_feature(FW_FEATURE_OPAL)) seq_printf(m, "firmware\t: OPAL v1\n"); -- cgit v0.10.2 From b2b48584dfc69a5ebc70ee7976524d7122e5df5f Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 14 May 2013 15:12:31 +1000 Subject: powerpc/powernv: Fix starting of secondary CPUs on OPALv2 and v3 The current code fails to handle kexec on OPALv2. This fixes it and adds code to improve the situation on OPALv3 where we can query the CPU status from the firmware and decide what to do based on that. Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c index 6a3ecca..88c9459 100644 --- a/arch/powerpc/platforms/powernv/smp.c +++ b/arch/powerpc/platforms/powernv/smp.c @@ -71,18 +71,68 @@ int pnv_smp_kick_cpu(int nr) BUG_ON(nr < 0 || nr >= NR_CPUS); - /* On OPAL v2 the CPU are still spinning inside OPAL itself, - * get them back now + /* + * If we already started or OPALv2 is not supported, we just + * kick the CPU via the PACA */ - if (!paca[nr].cpu_start && firmware_has_feature(FW_FEATURE_OPALv2)) { - pr_devel("OPAL: Starting CPU %d (HW 0x%x)...\n", nr, pcpu); - rc = opal_start_cpu(pcpu, start_here); + if (paca[nr].cpu_start || !firmware_has_feature(FW_FEATURE_OPALv2)) + goto kick; + + /* + * At this point, the CPU can either be spinning on the way in + * from kexec or be inside OPAL waiting to be started for the + * first time. OPAL v3 allows us to query OPAL to know if it + * has the CPUs, so we do that + */ + if (firmware_has_feature(FW_FEATURE_OPALv3)) { + uint8_t status; + + rc = opal_query_cpu_status(pcpu, &status); if (rc != OPAL_SUCCESS) { - pr_warn("OPAL Error %ld starting CPU %d\n", + pr_warn("OPAL Error %ld querying CPU %d state\n", rc, nr); return -ENODEV; } + + /* + * Already started, just kick it, probably coming from + * kexec and spinning + */ + if (status == OPAL_THREAD_STARTED) + goto kick; + + /* + * Available/inactive, let's kick it + */ + if (status == OPAL_THREAD_INACTIVE) { + pr_devel("OPAL: Starting CPU %d (HW 0x%x)...\n", + nr, pcpu); + rc = opal_start_cpu(pcpu, start_here); + if (rc != OPAL_SUCCESS) { + pr_warn("OPAL Error %ld starting CPU %d\n", + rc, nr); + return -ENODEV; + } + } else { + /* + * An unavailable CPU (or any other unknown status) + * shouldn't be started. It should also + * not be in the possible map but currently it can + * happen + */ + pr_devel("OPAL: CPU %d (HW 0x%x) is unavailable" + " (status %d)...\n", nr, pcpu, status); + return -ENODEV; + } + } else { + /* + * On OPAL v2, we just kick it and hope for the best, + * we must not test the error from opal_start_cpu() or + * we would fail to get CPUs from kexec. + */ + opal_start_cpu(pcpu, start_here); } + kick: return smp_generic_kick_cpu(nr); } -- cgit v0.10.2 From ca9d7aea5952c5e90bfe28ed738a7e962c0adad2 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 13 May 2013 00:23:38 +0000 Subject: powerpc: Provide __bswapdi2 Some versions of GCC apparently expect this to be provided by libgcc. Updates from Mikey to fix 32 bit version and adding "r" to registers. Signed-off-by: David Woodhouse Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 19e096b..e469f30 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -657,6 +657,17 @@ _GLOBAL(__ucmpdi2) li r3,2 blr +_GLOBAL(__bswapdi2) + rotlwi r9,r4,8 + rotlwi r10,r3,8 + rlwimi r9,r4,24,0,7 + rlwimi r10,r3,24,0,7 + rlwimi r9,r4,24,16,23 + rlwimi r10,r3,24,16,23 + mr r3,r9 + mr r4,r10 + blr + _GLOBAL(abs) srawi r4,r3,31 xor r3,r3,r4 diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index 5cfa800..6820e45 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -234,6 +234,17 @@ _GLOBAL(__flush_dcache_icache) isync blr +_GLOBAL(__bswapdi2) + srdi r8,r3,32 + rlwinm r7,r3,8,0xffffffff + rlwimi r7,r3,24,0,7 + rlwinm r9,r8,8,0xffffffff + rlwimi r7,r3,24,16,23 + rlwimi r9,r8,24,0,7 + rlwimi r9,r8,24,16,23 + sldi r7,r7,32 + or r3,r7,r9 + blr #if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) /* diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index 78b8766..c296665 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -143,7 +143,8 @@ EXPORT_SYMBOL(__lshrdi3); int __ucmpdi2(unsigned long long, unsigned long long); EXPORT_SYMBOL(__ucmpdi2); #endif - +long long __bswapdi2(long long); +EXPORT_SYMBOL(__bswapdi2); EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(memset); EXPORT_SYMBOL(memmove); -- cgit v0.10.2 From dcb615aef988b57deef3d9b4557ff20f681a82b0 Mon Sep 17 00:00:00 2001 From: Alexander Gordeev Date: Mon, 13 May 2013 00:57:49 +0000 Subject: powerpc: Fix irq_set_affinity() return values Signed-off-by: Alexander Gordeev Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/platforms/wsp/ics.c b/arch/powerpc/platforms/wsp/ics.c index 97fe82e..2d3b1dd 100644 --- a/arch/powerpc/platforms/wsp/ics.c +++ b/arch/powerpc/platforms/wsp/ics.c @@ -361,7 +361,7 @@ static int wsp_chip_set_affinity(struct irq_data *d, xive = xive_set_server(xive, get_irq_server(ics, hw_irq)); wsp_ics_set_xive(ics, hw_irq, xive); - return 0; + return IRQ_SET_MASK_OK; } static struct irq_chip wsp_irq_chip = { diff --git a/arch/powerpc/sysdev/ehv_pic.c b/arch/powerpc/sysdev/ehv_pic.c index 6e0e100..9cd0e60 100644 --- a/arch/powerpc/sysdev/ehv_pic.c +++ b/arch/powerpc/sysdev/ehv_pic.c @@ -81,7 +81,7 @@ int ehv_pic_set_affinity(struct irq_data *d, const struct cpumask *dest, ev_int_set_config(src, config, prio, cpuid); spin_unlock_irqrestore(&ehv_pic_lock, flags); - return 0; + return IRQ_SET_MASK_OK; } static unsigned int ehv_pic_type_to_vecpri(unsigned int type) diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index ee21b5e..0a13ecb 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -836,7 +836,7 @@ int mpic_set_affinity(struct irq_data *d, const struct cpumask *cpumask, mpic_physmask(mask)); } - return 0; + return IRQ_SET_MASK_OK; } static unsigned int mpic_type_to_vecpri(struct mpic *mpic, unsigned int type) diff --git a/arch/powerpc/sysdev/xics/ics-opal.c b/arch/powerpc/sysdev/xics/ics-opal.c index f7e8609..39d7221 100644 --- a/arch/powerpc/sysdev/xics/ics-opal.c +++ b/arch/powerpc/sysdev/xics/ics-opal.c @@ -148,7 +148,7 @@ static int ics_opal_set_affinity(struct irq_data *d, __func__, d->irq, hw_irq, server, rc); return -1; } - return 0; + return IRQ_SET_MASK_OK; } static struct irq_chip ics_opal_irq_chip = { -- cgit v0.10.2 From 6cecf76b47ba6bea3c81d170afc2e0b244e5849c Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Mon, 13 May 2013 14:14:53 +0000 Subject: powerpc/booke64: Fix kernel hangs at kernel_dbg_exc MSR_DE is not cleared on entry to the kernel, and we don't clear it explicitly outside of debug code. If we have MSR_DE set in prime_debug_regs(), and the new thread has events enabled in DBCR0 (e.g. ICMP is set in thread->dbsr0, even though it was cleared in the real DBCR0 when the thread got scheduled out), we'll end up taking a debug exception in the kernel when DBCR0 is loaded. DSRR0 will not point to an exception vector, and the kernel ends up hanging at kernel_dbg_exc. Fix this by always clearing MSR_DE when we load new debug state. Another observed source of kernel_dbg_exc hangs is with the branch taken event. If this event is active, but we take a non-debug trap (e.g. a TLB miss or an asynchronous interrupt) before the next branch. We end up taking a branch-taken debug exception on the initial branch instruction of the exception vector, but because the debug exception is DBSR_BT rather than DBSR_IC we branch to kernel_dbg_exc before even checking the DSRR0 address. Fix this by checking for DBSR_BT as well as DBSR_IC, which is what 32-bit does and what the comments suggest was intended in the 64-bit code as well. Signed-off-by: Scott Wood Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S index 42a756e..645170a 100644 --- a/arch/powerpc/kernel/exceptions-64e.S +++ b/arch/powerpc/kernel/exceptions-64e.S @@ -489,7 +489,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) */ mfspr r14,SPRN_DBSR /* check single-step/branch taken */ - andis. r15,r14,DBSR_IC@h + andis. r15,r14,(DBSR_IC|DBSR_BT)@h beq+ 1f LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e) @@ -500,7 +500,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) bge+ cr1,1f /* here it looks like we got an inappropriate debug exception. */ - lis r14,DBSR_IC@h /* clear the IC event */ + lis r14,(DBSR_IC|DBSR_BT)@h /* clear the event */ rlwinm r11,r11,0,~MSR_DE /* clear DE in the CSRR1 value */ mtspr SPRN_DBSR,r14 mtspr SPRN_CSRR1,r11 @@ -555,7 +555,7 @@ kernel_dbg_exc: */ mfspr r14,SPRN_DBSR /* check single-step/branch taken */ - andis. r15,r14,DBSR_IC@h + andis. r15,r14,(DBSR_IC|DBSR_BT)@h beq+ 1f LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e) @@ -566,7 +566,7 @@ kernel_dbg_exc: bge+ cr1,1f /* here it looks like we got an inappropriate debug exception. */ - lis r14,DBSR_IC@h /* clear the IC event */ + lis r14,(DBSR_IC|DBSR_BT)@h /* clear the event */ rlwinm r11,r11,0,~MSR_DE /* clear DE in the DSRR1 value */ mtspr SPRN_DBSR,r14 mtspr SPRN_DSRR1,r11 diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 21981a8..a902723 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -339,6 +339,13 @@ static void set_debug_reg_defaults(struct thread_struct *thread) static void prime_debug_regs(struct thread_struct *thread) { + /* + * We could have inherited MSR_DE from userspace, since + * it doesn't get cleared on exception entry. Make sure + * MSR_DE is clear before we enable any debug events. + */ + mtmsr(mfmsr() & ~MSR_DE); + mtspr(SPRN_IAC1, thread->iac1); mtspr(SPRN_IAC2, thread->iac2); #if CONFIG_PPC_ADV_DEBUG_IACS > 2 -- cgit v0.10.2 From 22ecbe8dcef4f6bf80ed4358600e8f6e03105c5c Mon Sep 17 00:00:00 2001 From: Li Zhong Date: Mon, 13 May 2013 16:16:40 +0000 Subject: powerpc: Syscall hooks for context tracking subsystem This is the syscall slow path hooks for context tracking subsystem, corresponding to [PATCH] x86: Syscall hooks for userspace RCU extended QS commit bf5a3c13b939813d28ce26c01425054c740d6731 TIF_MEMDIE is moved to the second 16-bits (with value 17), as it seems there is no asm code using it. TIF_NOHZ is added to _TIF_SYCALL_T_OR_A, so it is better for it to be in the same 16 bits with others in the group, so in the asm code, andi. with this group could work. Signed-off-by: Li Zhong Acked-by: Frederic Weisbecker Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h index 8ceea14..ba7b197 100644 --- a/arch/powerpc/include/asm/thread_info.h +++ b/arch/powerpc/include/asm/thread_info.h @@ -97,7 +97,7 @@ static inline struct thread_info *current_thread_info(void) #define TIF_PERFMON_CTXSW 6 /* perfmon needs ctxsw calls */ #define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */ #define TIF_SINGLESTEP 8 /* singlestepping active */ -#define TIF_MEMDIE 9 /* is terminating due to OOM killer */ +#define TIF_NOHZ 9 /* in adaptive nohz mode */ #define TIF_SECCOMP 10 /* secure computing */ #define TIF_RESTOREALL 11 /* Restore all regs (implies NOERROR) */ #define TIF_NOERROR 12 /* Force successful syscall return */ @@ -106,6 +106,7 @@ static inline struct thread_info *current_thread_info(void) #define TIF_SYSCALL_TRACEPOINT 15 /* syscall tracepoint instrumentation */ #define TIF_EMULATE_STACK_STORE 16 /* Is an instruction emulation for stack store? */ +#define TIF_MEMDIE 17 /* is terminating due to OOM killer */ /* as above, but as bit values */ #define _TIF_SYSCALL_TRACE (1< #include #include +#include #include #include @@ -1788,6 +1789,8 @@ long do_syscall_trace_enter(struct pt_regs *regs) { long ret = 0; + user_exit(); + secure_computing_strict(regs->gpr[0]); if (test_thread_flag(TIF_SYSCALL_TRACE) && @@ -1832,4 +1835,6 @@ void do_syscall_trace_leave(struct pt_regs *regs) step = test_thread_flag(TIF_SINGLESTEP); if (step || test_thread_flag(TIF_SYSCALL_TRACE)) tracehook_report_syscall_exit(regs, step); + + user_enter(); } -- cgit v0.10.2 From ba12eedee321eeb5baecaada285daeb3462c35f5 Mon Sep 17 00:00:00 2001 From: Li Zhong Date: Mon, 13 May 2013 16:16:41 +0000 Subject: powerpc: Exception hooks for context tracking subsystem This is the exception hooks for context tracking subsystem, including data access, program check, single step, instruction breakpoint, machine check, alignment, fp unavailable, altivec assist, unknown exception, whose handlers might use RCU. This patch corresponds to [PATCH] x86: Exception hooks for userspace RCU extended QS commit 6ba3c97a38803883c2eee489505796cb0a727122 But after the exception handling moved to generic code, and some changes in following two commits: 56dd9470d7c8734f055da2a6bac553caf4a468eb context_tracking: Move exception handling to generic code 6c1e0256fad84a843d915414e4b5973b7443d48d context_tracking: Restore correct previous context state on exception exit it is able for exception hooks to use the generic code above instead of a redundant arch implementation. Signed-off-by: Li Zhong Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 83efa2f..a7a648f 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include @@ -667,6 +668,7 @@ int machine_check_generic(struct pt_regs *regs) void machine_check_exception(struct pt_regs *regs) { + enum ctx_state prev_state = exception_enter(); int recover = 0; __get_cpu_var(irq_stat).mce_exceptions++; @@ -683,7 +685,7 @@ void machine_check_exception(struct pt_regs *regs) recover = cur_cpu_spec->machine_check(regs); if (recover > 0) - return; + goto bail; #if defined(CONFIG_8xx) && defined(CONFIG_PCI) /* the qspan pci read routines can cause machine checks -- Cort @@ -693,20 +695,23 @@ void machine_check_exception(struct pt_regs *regs) * -- BenH */ bad_page_fault(regs, regs->dar, SIGBUS); - return; + goto bail; #endif if (debugger_fault_handler(regs)) - return; + goto bail; if (check_io_access(regs)) - return; + goto bail; die("Machine check", regs, SIGBUS); /* Must die if the interrupt is not recoverable */ if (!(regs->msr & MSR_RI)) panic("Unrecoverable Machine check"); + +bail: + exception_exit(prev_state); } void SMIException(struct pt_regs *regs) @@ -716,20 +721,29 @@ void SMIException(struct pt_regs *regs) void unknown_exception(struct pt_regs *regs) { + enum ctx_state prev_state = exception_enter(); + printk("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", regs->nip, regs->msr, regs->trap); _exception(SIGTRAP, regs, 0, 0); + + exception_exit(prev_state); } void instruction_breakpoint_exception(struct pt_regs *regs) { + enum ctx_state prev_state = exception_enter(); + if (notify_die(DIE_IABR_MATCH, "iabr_match", regs, 5, 5, SIGTRAP) == NOTIFY_STOP) - return; + goto bail; if (debugger_iabr_match(regs)) - return; + goto bail; _exception(SIGTRAP, regs, TRAP_BRKPT, regs->nip); + +bail: + exception_exit(prev_state); } void RunModeException(struct pt_regs *regs) @@ -739,15 +753,20 @@ void RunModeException(struct pt_regs *regs) void __kprobes single_step_exception(struct pt_regs *regs) { + enum ctx_state prev_state = exception_enter(); + clear_single_step(regs); if (notify_die(DIE_SSTEP, "single_step", regs, 5, 5, SIGTRAP) == NOTIFY_STOP) - return; + goto bail; if (debugger_sstep(regs)) - return; + goto bail; _exception(SIGTRAP, regs, TRAP_TRACE, regs->nip); + +bail: + exception_exit(prev_state); } /* @@ -1005,6 +1024,7 @@ int is_valid_bugaddr(unsigned long addr) void __kprobes program_check_exception(struct pt_regs *regs) { + enum ctx_state prev_state = exception_enter(); unsigned int reason = get_reason(regs); extern int do_mathemu(struct pt_regs *regs); @@ -1014,26 +1034,26 @@ void __kprobes program_check_exception(struct pt_regs *regs) if (reason & REASON_FP) { /* IEEE FP exception */ parse_fpe(regs); - return; + goto bail; } if (reason & REASON_TRAP) { /* Debugger is first in line to stop recursive faults in * rcu_lock, notify_die, or atomic_notifier_call_chain */ if (debugger_bpt(regs)) - return; + goto bail; /* trap exception */ if (notify_die(DIE_BPT, "breakpoint", regs, 5, 5, SIGTRAP) == NOTIFY_STOP) - return; + goto bail; if (!(regs->msr & MSR_PR) && /* not user-mode */ report_bug(regs->nip, regs) == BUG_TRAP_TYPE_WARN) { regs->nip += 4; - return; + goto bail; } _exception(SIGTRAP, regs, TRAP_BRKPT, regs->nip); - return; + goto bail; } #ifdef CONFIG_PPC_TRANSACTIONAL_MEM if (reason & REASON_TM) { @@ -1049,7 +1069,7 @@ void __kprobes program_check_exception(struct pt_regs *regs) if (!user_mode(regs) && report_bug(regs->nip, regs) == BUG_TRAP_TYPE_WARN) { regs->nip += 4; - return; + goto bail; } /* If usermode caused this, it's done something illegal and * gets a SIGILL slap on the wrist. We call it an illegal @@ -1059,7 +1079,7 @@ void __kprobes program_check_exception(struct pt_regs *regs) */ if (user_mode(regs)) { _exception(SIGILL, regs, ILL_ILLOPN, regs->nip); - return; + goto bail; } else { printk(KERN_EMERG "Unexpected TM Bad Thing exception " "at %lx (msr 0x%x)\n", regs->nip, reason); @@ -1083,16 +1103,16 @@ void __kprobes program_check_exception(struct pt_regs *regs) switch (do_mathemu(regs)) { case 0: emulate_single_step(regs); - return; + goto bail; case 1: { int code = 0; code = __parse_fpscr(current->thread.fpscr.val); _exception(SIGFPE, regs, code, regs->nip); - return; + goto bail; } case -EFAULT: _exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip); - return; + goto bail; } /* fall through on any other errors */ #endif /* CONFIG_MATH_EMULATION */ @@ -1103,10 +1123,10 @@ void __kprobes program_check_exception(struct pt_regs *regs) case 0: regs->nip += 4; emulate_single_step(regs); - return; + goto bail; case -EFAULT: _exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip); - return; + goto bail; } } @@ -1114,10 +1134,14 @@ void __kprobes program_check_exception(struct pt_regs *regs) _exception(SIGILL, regs, ILL_PRVOPC, regs->nip); else _exception(SIGILL, regs, ILL_ILLOPC, regs->nip); + +bail: + exception_exit(prev_state); } void alignment_exception(struct pt_regs *regs) { + enum ctx_state prev_state = exception_enter(); int sig, code, fixed = 0; /* We restore the interrupt state now */ @@ -1131,7 +1155,7 @@ void alignment_exception(struct pt_regs *regs) if (fixed == 1) { regs->nip += 4; /* skip over emulated instruction */ emulate_single_step(regs); - return; + goto bail; } /* Operand address was bad */ @@ -1146,6 +1170,9 @@ void alignment_exception(struct pt_regs *regs) _exception(sig, regs, code, regs->dar); else bad_page_fault(regs, regs->dar, sig); + +bail: + exception_exit(prev_state); } void StackOverflow(struct pt_regs *regs) @@ -1174,23 +1201,32 @@ void trace_syscall(struct pt_regs *regs) void kernel_fp_unavailable_exception(struct pt_regs *regs) { + enum ctx_state prev_state = exception_enter(); + printk(KERN_EMERG "Unrecoverable FP Unavailable Exception " "%lx at %lx\n", regs->trap, regs->nip); die("Unrecoverable FP Unavailable Exception", regs, SIGABRT); + + exception_exit(prev_state); } void altivec_unavailable_exception(struct pt_regs *regs) { + enum ctx_state prev_state = exception_enter(); + if (user_mode(regs)) { /* A user program has executed an altivec instruction, but this kernel doesn't support altivec. */ _exception(SIGILL, regs, ILL_ILLOPC, regs->nip); - return; + goto bail; } printk(KERN_EMERG "Unrecoverable VMX/Altivec Unavailable Exception " "%lx at %lx\n", regs->trap, regs->nip); die("Unrecoverable VMX/Altivec Unavailable Exception", regs, SIGABRT); + +bail: + exception_exit(prev_state); } void vsx_unavailable_exception(struct pt_regs *regs) diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index 229951f..8726779 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include @@ -196,6 +197,7 @@ static int mm_fault_error(struct pt_regs *regs, unsigned long addr, int fault) int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address, unsigned long error_code) { + enum ctx_state prev_state = exception_enter(); struct vm_area_struct * vma; struct mm_struct *mm = current->mm; unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE; @@ -204,6 +206,7 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address, int trap = TRAP(regs); int is_exec = trap == 0x400; int fault; + int rc = 0; #if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE)) /* @@ -230,28 +233,30 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address, * look at it */ if (error_code & ICSWX_DSI_UCT) { - int rc = acop_handle_fault(regs, address, error_code); + rc = acop_handle_fault(regs, address, error_code); if (rc) - return rc; + goto bail; } #endif /* CONFIG_PPC_ICSWX */ if (notify_page_fault(regs)) - return 0; + goto bail; if (unlikely(debugger_fault_handler(regs))) - return 0; + goto bail; /* On a kernel SLB miss we can only check for a valid exception entry */ - if (!user_mode(regs) && (address >= TASK_SIZE)) - return SIGSEGV; + if (!user_mode(regs) && (address >= TASK_SIZE)) { + rc = SIGSEGV; + goto bail; + } #if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE) || \ defined(CONFIG_PPC_BOOK3S_64)) if (error_code & DSISR_DABRMATCH) { /* breakpoint match */ do_break(regs, address, error_code); - return 0; + goto bail; } #endif @@ -260,8 +265,10 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address, local_irq_enable(); if (in_atomic() || mm == NULL) { - if (!user_mode(regs)) - return SIGSEGV; + if (!user_mode(regs)) { + rc = SIGSEGV; + goto bail; + } /* in_atomic() in user mode is really bad, as is current->mm == NULL. */ printk(KERN_EMERG "Page fault in user mode with " @@ -417,9 +424,11 @@ good_area: */ fault = handle_mm_fault(mm, vma, address, flags); if (unlikely(fault & (VM_FAULT_RETRY|VM_FAULT_ERROR))) { - int rc = mm_fault_error(regs, address, fault); + rc = mm_fault_error(regs, address, fault); if (rc >= MM_FAULT_RETURN) - return rc; + goto bail; + else + rc = 0; } /* @@ -454,7 +463,7 @@ good_area: } up_read(&mm->mmap_sem); - return 0; + goto bail; bad_area: up_read(&mm->mmap_sem); @@ -463,7 +472,7 @@ bad_area_nosemaphore: /* User mode accesses cause a SIGSEGV */ if (user_mode(regs)) { _exception(SIGSEGV, regs, code, address); - return 0; + goto bail; } if (is_exec && (error_code & DSISR_PROTFAULT)) @@ -471,7 +480,11 @@ bad_area_nosemaphore: " page (%lx) - exploit attempt? (uid: %d)\n", address, from_kuid(&init_user_ns, current_uid())); - return SIGSEGV; + rc = SIGSEGV; + +bail: + exception_exit(prev_state); + return rc; } diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 88ac0ee..e303a6d 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include @@ -954,6 +955,7 @@ void hash_failure_debug(unsigned long ea, unsigned long access, */ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) { + enum ctx_state prev_state = exception_enter(); pgd_t *pgdir; unsigned long vsid; struct mm_struct *mm; @@ -973,7 +975,8 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) mm = current->mm; if (! mm) { DBG_LOW(" user region with no mm !\n"); - return 1; + rc = 1; + goto bail; } psize = get_slice_psize(mm, ea); ssize = user_segment_size(ea); @@ -992,19 +995,23 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) /* Not a valid range * Send the problem up to do_page_fault */ - return 1; + rc = 1; + goto bail; } DBG_LOW(" mm=%p, mm->pgdir=%p, vsid=%016lx\n", mm, mm->pgd, vsid); /* Bad address. */ if (!vsid) { DBG_LOW("Bad address!\n"); - return 1; + rc = 1; + goto bail; } /* Get pgdir */ pgdir = mm->pgd; - if (pgdir == NULL) - return 1; + if (pgdir == NULL) { + rc = 1; + goto bail; + } /* Check CPU locality */ tmp = cpumask_of(smp_processor_id()); @@ -1027,7 +1034,8 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) ptep = find_linux_pte_or_hugepte(pgdir, ea, &hugeshift); if (ptep == NULL || !pte_present(*ptep)) { DBG_LOW(" no PTE !\n"); - return 1; + rc = 1; + goto bail; } /* Add _PAGE_PRESENT to the required access perm */ @@ -1038,13 +1046,16 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) */ if (access & ~pte_val(*ptep)) { DBG_LOW(" no access !\n"); - return 1; + rc = 1; + goto bail; } #ifdef CONFIG_HUGETLB_PAGE - if (hugeshift) - return __hash_page_huge(ea, access, vsid, ptep, trap, local, + if (hugeshift) { + rc = __hash_page_huge(ea, access, vsid, ptep, trap, local, ssize, hugeshift, psize); + goto bail; + } #endif /* CONFIG_HUGETLB_PAGE */ #ifndef CONFIG_PPC_64K_PAGES @@ -1124,6 +1135,9 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) pte_val(*(ptep + PTRS_PER_PTE))); #endif DBG_LOW(" -> rc=%d\n", rc); + +bail: + exception_exit(prev_state); return rc; } EXPORT_SYMBOL_GPL(hash_page); @@ -1259,6 +1273,8 @@ void flush_hash_range(unsigned long number, int local) */ void low_hash_fault(struct pt_regs *regs, unsigned long address, int rc) { + enum ctx_state prev_state = exception_enter(); + if (user_mode(regs)) { #ifdef CONFIG_PPC_SUBPAGE_PROT if (rc == -2) @@ -1268,6 +1284,8 @@ void low_hash_fault(struct pt_regs *regs, unsigned long address, int rc) _exception(SIGBUS, regs, BUS_ADRERR, address); } else bad_page_fault(regs, address, SIGBUS); + + exception_exit(prev_state); } long hpte_insert_repeating(unsigned long hash, unsigned long vpn, -- cgit v0.10.2 From 106ed886abc46723c290e82e5f161d9b40820203 Mon Sep 17 00:00:00 2001 From: Li Zhong Date: Mon, 13 May 2013 16:16:42 +0000 Subject: powerpc: Exit user context on notify resume This patch allows RCU usage in do_notify_resume, e.g. signal handling. It corresponds to [PATCH] x86: Exit RCU extended QS on notify resume commit edf55fda35c7dc7f2d9241c3abaddaf759b457c6 Signed-off-by: Li Zhong Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index cf12eae..d63b502 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -159,6 +160,8 @@ static int do_signal(struct pt_regs *regs) void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags) { + user_exit(); + if (thread_info_flags & _TIF_UPROBE) uprobe_notify_resume(regs); @@ -169,4 +172,6 @@ void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags) clear_thread_flag(TIF_NOTIFY_RESUME); tracehook_notify_resume(regs); } + + user_enter(); } -- cgit v0.10.2 From 5d1c57451154047ab31aadfbc712bb8aa174bfb3 Mon Sep 17 00:00:00 2001 From: Li Zhong Date: Mon, 13 May 2013 16:16:43 +0000 Subject: powerpc: Use the new schedule_user API on userspace preemption This patch corresponds to [PATCH] x86: Use the new schedule_user API on userspace preemption commit 0430499ce9d78691f3985962021b16bf8f8a8048 Signed-off-by: Li Zhong Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/include/asm/context_tracking.h b/arch/powerpc/include/asm/context_tracking.h new file mode 100644 index 0000000..b6f5a33 --- /dev/null +++ b/arch/powerpc/include/asm/context_tracking.h @@ -0,0 +1,10 @@ +#ifndef _ASM_POWERPC_CONTEXT_TRACKING_H +#define _ASM_POWERPC_CONTEXT_TRACKING_H + +#ifdef CONFIG_CONTEXT_TRACKING +#define SCHEDULE_USER bl .schedule_user +#else +#define SCHEDULE_USER bl .schedule +#endif + +#endif diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 48e8a86..794889b 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -33,6 +33,7 @@ #include #include #include +#include /* * System calls. @@ -632,7 +633,7 @@ _GLOBAL(ret_from_except_lite) andi. r0,r4,_TIF_NEED_RESCHED beq 1f bl .restore_interrupts - bl .schedule + SCHEDULE_USER b .ret_from_except_lite 1: bl .save_nvgprs -- cgit v0.10.2 From a1797b2fd2051515689fd54a9db8fd20ebd5e5f7 Mon Sep 17 00:00:00 2001 From: Li Zhong Date: Mon, 13 May 2013 16:16:44 +0000 Subject: powerpc: select HAVE_CONTEXT_TRACKING for pSeries Start context tracking support from pSeries. Signed-off-by: Li Zhong Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index 9a0941b..023b288 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -18,6 +18,7 @@ config PPC_PSERIES select PPC_PCI_CHOICE if EXPERT select ZLIB_DEFLATE select PPC_DOORBELL + select HAVE_CONTEXT_TRACKING default y config PPC_SPLPAR -- cgit v0.10.2 From d52f2dc40b52201700001e868093c5ec827a8f33 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Mon, 13 May 2013 18:44:56 +0000 Subject: powerpc/perf: Move BHRB code into CONFIG_PPC64 region The new Branch History Rolling buffer (BHRB) code is only useful on 64bit processors, so move it into the #ifdef CONFIG_PPC64 region. This avoids code bloat on 32bit systems. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index c627843..843bb8b 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -100,6 +100,10 @@ static inline int siar_valid(struct pt_regs *regs) return 1; } +static inline void power_pmu_bhrb_enable(struct perf_event *event) {} +static inline void power_pmu_bhrb_disable(struct perf_event *event) {} +void power_pmu_flush_branch_stack(void) {} +static inline void power_pmu_bhrb_read(struct cpu_hw_events *cpuhw) {} #endif /* CONFIG_PPC32 */ static bool regs_use_siar(struct pt_regs *regs) @@ -308,6 +312,129 @@ static inline int siar_valid(struct pt_regs *regs) return 1; } + +/* Reset all possible BHRB entries */ +static void power_pmu_bhrb_reset(void) +{ + asm volatile(PPC_CLRBHRB); +} + +static void power_pmu_bhrb_enable(struct perf_event *event) +{ + struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events); + + if (!ppmu->bhrb_nr) + return; + + /* Clear BHRB if we changed task context to avoid data leaks */ + if (event->ctx->task && cpuhw->bhrb_context != event->ctx) { + power_pmu_bhrb_reset(); + cpuhw->bhrb_context = event->ctx; + } + cpuhw->bhrb_users++; +} + +static void power_pmu_bhrb_disable(struct perf_event *event) +{ + struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events); + + if (!ppmu->bhrb_nr) + return; + + cpuhw->bhrb_users--; + WARN_ON_ONCE(cpuhw->bhrb_users < 0); + + if (!cpuhw->disabled && !cpuhw->bhrb_users) { + /* BHRB cannot be turned off when other + * events are active on the PMU. + */ + + /* avoid stale pointer */ + cpuhw->bhrb_context = NULL; + } +} + +/* Called from ctxsw to prevent one process's branch entries to + * mingle with the other process's entries during context switch. + */ +void power_pmu_flush_branch_stack(void) +{ + if (ppmu->bhrb_nr) + power_pmu_bhrb_reset(); +} + + +/* Processing BHRB entries */ +static void power_pmu_bhrb_read(struct cpu_hw_events *cpuhw) +{ + u64 val; + u64 addr; + int r_index, u_index, target, pred; + + r_index = 0; + u_index = 0; + while (r_index < ppmu->bhrb_nr) { + /* Assembly read function */ + val = read_bhrb(r_index); + + /* Terminal marker: End of valid BHRB entries */ + if (val == 0) { + break; + } else { + /* BHRB field break up */ + addr = val & BHRB_EA; + pred = val & BHRB_PREDICTION; + target = val & BHRB_TARGET; + + /* Probable Missed entry: Not applicable for POWER8 */ + if ((addr == 0) && (target == 0) && (pred == 1)) { + r_index++; + continue; + } + + /* Real Missed entry: Power8 based missed entry */ + if ((addr == 0) && (target == 1) && (pred == 1)) { + r_index++; + continue; + } + + /* Reserved condition: Not a valid entry */ + if ((addr == 0) && (target == 1) && (pred == 0)) { + r_index++; + continue; + } + + /* Is a target address */ + if (val & BHRB_TARGET) { + /* First address cannot be a target address */ + if (r_index == 0) { + r_index++; + continue; + } + + /* Update target address for the previous entry */ + cpuhw->bhrb_entries[u_index - 1].to = addr; + cpuhw->bhrb_entries[u_index - 1].mispred = pred; + cpuhw->bhrb_entries[u_index - 1].predicted = ~pred; + + /* Dont increment u_index */ + r_index++; + } else { + /* Update address, flags for current entry */ + cpuhw->bhrb_entries[u_index].from = addr; + cpuhw->bhrb_entries[u_index].mispred = pred; + cpuhw->bhrb_entries[u_index].predicted = ~pred; + + /* Successfully popullated one entry */ + u_index++; + r_index++; + } + } + } + cpuhw->bhrb_stack.nr = u_index; + return; +} + #endif /* CONFIG_PPC64 */ static void perf_event_interrupt(struct pt_regs *regs); @@ -904,47 +1031,6 @@ static int collect_events(struct perf_event *group, int max_count, return n; } -/* Reset all possible BHRB entries */ -static void power_pmu_bhrb_reset(void) -{ - asm volatile(PPC_CLRBHRB); -} - -void power_pmu_bhrb_enable(struct perf_event *event) -{ - struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events); - - if (!ppmu->bhrb_nr) - return; - - /* Clear BHRB if we changed task context to avoid data leaks */ - if (event->ctx->task && cpuhw->bhrb_context != event->ctx) { - power_pmu_bhrb_reset(); - cpuhw->bhrb_context = event->ctx; - } - cpuhw->bhrb_users++; -} - -void power_pmu_bhrb_disable(struct perf_event *event) -{ - struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events); - - if (!ppmu->bhrb_nr) - return; - - cpuhw->bhrb_users--; - WARN_ON_ONCE(cpuhw->bhrb_users < 0); - - if (!cpuhw->disabled && !cpuhw->bhrb_users) { - /* BHRB cannot be turned off when other - * events are active on the PMU. - */ - - /* avoid stale pointer */ - cpuhw->bhrb_context = NULL; - } -} - /* * Add a event to the PMU. * If all events are not already frozen, then we disable and @@ -1180,15 +1266,6 @@ int power_pmu_commit_txn(struct pmu *pmu) return 0; } -/* Called from ctxsw to prevent one process's branch entries to - * mingle with the other process's entries during context switch. - */ -void power_pmu_flush_branch_stack(void) -{ - if (ppmu->bhrb_nr) - power_pmu_bhrb_reset(); -} - /* * Return 1 if we might be able to put event on a limited PMC, * or 0 if not. @@ -1458,77 +1535,6 @@ struct pmu power_pmu = { .flush_branch_stack = power_pmu_flush_branch_stack, }; -/* Processing BHRB entries */ -void power_pmu_bhrb_read(struct cpu_hw_events *cpuhw) -{ - u64 val; - u64 addr; - int r_index, u_index, target, pred; - - r_index = 0; - u_index = 0; - while (r_index < ppmu->bhrb_nr) { - /* Assembly read function */ - val = read_bhrb(r_index); - - /* Terminal marker: End of valid BHRB entries */ - if (val == 0) { - break; - } else { - /* BHRB field break up */ - addr = val & BHRB_EA; - pred = val & BHRB_PREDICTION; - target = val & BHRB_TARGET; - - /* Probable Missed entry: Not applicable for POWER8 */ - if ((addr == 0) && (target == 0) && (pred == 1)) { - r_index++; - continue; - } - - /* Real Missed entry: Power8 based missed entry */ - if ((addr == 0) && (target == 1) && (pred == 1)) { - r_index++; - continue; - } - - /* Reserved condition: Not a valid entry */ - if ((addr == 0) && (target == 1) && (pred == 0)) { - r_index++; - continue; - } - - /* Is a target address */ - if (val & BHRB_TARGET) { - /* First address cannot be a target address */ - if (r_index == 0) { - r_index++; - continue; - } - - /* Update target address for the previous entry */ - cpuhw->bhrb_entries[u_index - 1].to = addr; - cpuhw->bhrb_entries[u_index - 1].mispred = pred; - cpuhw->bhrb_entries[u_index - 1].predicted = ~pred; - - /* Dont increment u_index */ - r_index++; - } else { - /* Update address, flags for current entry */ - cpuhw->bhrb_entries[u_index].from = addr; - cpuhw->bhrb_entries[u_index].mispred = pred; - cpuhw->bhrb_entries[u_index].predicted = ~pred; - - /* Successfully popullated one entry */ - u_index++; - r_index++; - } - } - } - cpuhw->bhrb_stack.nr = u_index; - return; -} - /* * A counter has overflowed; update its count and record * things if requested. Note that interrupts are hard-disabled -- cgit v0.10.2 From 506e70d13236dfdb0bc15e0914298ab0a7b7f4df Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Mon, 13 May 2013 18:44:57 +0000 Subject: powerpc/pmu: Fix order of interpreting BHRB target entries The current Branch History Rolling Buffer (BHRB) code misinterprets the order of entries in the hardware buffer. It assumes that a branch target address will be read _after_ its corresponding branch. In reality the branch target comes before (lower mfbhrb entry) it's corresponding branch. This is a rewrite of the code to take this into account. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index 843bb8b..3fdfe45 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -363,72 +363,75 @@ void power_pmu_flush_branch_stack(void) power_pmu_bhrb_reset(); } - /* Processing BHRB entries */ -static void power_pmu_bhrb_read(struct cpu_hw_events *cpuhw) +void power_pmu_bhrb_read(struct cpu_hw_events *cpuhw) { u64 val; u64 addr; - int r_index, u_index, target, pred; + int r_index, u_index, pred; r_index = 0; u_index = 0; while (r_index < ppmu->bhrb_nr) { /* Assembly read function */ - val = read_bhrb(r_index); - - /* Terminal marker: End of valid BHRB entries */ - if (val == 0) { + val = read_bhrb(r_index++); + if (!val) + /* Terminal marker: End of valid BHRB entries */ break; - } else { - /* BHRB field break up */ + else { addr = val & BHRB_EA; pred = val & BHRB_PREDICTION; - target = val & BHRB_TARGET; - /* Probable Missed entry: Not applicable for POWER8 */ - if ((addr == 0) && (target == 0) && (pred == 1)) { - r_index++; + if (!addr) + /* invalid entry */ continue; - } - /* Real Missed entry: Power8 based missed entry */ - if ((addr == 0) && (target == 1) && (pred == 1)) { - r_index++; - continue; - } - - /* Reserved condition: Not a valid entry */ - if ((addr == 0) && (target == 1) && (pred == 0)) { - r_index++; - continue; - } + /* Branches are read most recent first (ie. mfbhrb 0 is + * the most recent branch). + * There are two types of valid entries: + * 1) a target entry which is the to address of a + * computed goto like a blr,bctr,btar. The next + * entry read from the bhrb will be branch + * corresponding to this target (ie. the actual + * blr/bctr/btar instruction). + * 2) a from address which is an actual branch. If a + * target entry proceeds this, then this is the + * matching branch for that target. If this is not + * following a target entry, then this is a branch + * where the target is given as an immediate field + * in the instruction (ie. an i or b form branch). + * In this case we need to read the instruction from + * memory to determine the target/to address. + */ - /* Is a target address */ if (val & BHRB_TARGET) { - /* First address cannot be a target address */ - if (r_index == 0) { - r_index++; - continue; - } - - /* Update target address for the previous entry */ - cpuhw->bhrb_entries[u_index - 1].to = addr; - cpuhw->bhrb_entries[u_index - 1].mispred = pred; - cpuhw->bhrb_entries[u_index - 1].predicted = ~pred; + /* Target branches use two entries + * (ie. computed gotos/XL form) + */ + cpuhw->bhrb_entries[u_index].to = addr; + cpuhw->bhrb_entries[u_index].mispred = pred; + cpuhw->bhrb_entries[u_index].predicted = ~pred; - /* Dont increment u_index */ - r_index++; + /* Get from address in next entry */ + val = read_bhrb(r_index++); + addr = val & BHRB_EA; + if (val & BHRB_TARGET) { + /* Shouldn't have two targets in a + row.. Reset index and try again */ + r_index--; + addr = 0; + } + cpuhw->bhrb_entries[u_index].from = addr; } else { - /* Update address, flags for current entry */ + /* Branches to immediate field + (ie I or B form) */ cpuhw->bhrb_entries[u_index].from = addr; + cpuhw->bhrb_entries[u_index].to = 0; cpuhw->bhrb_entries[u_index].mispred = pred; cpuhw->bhrb_entries[u_index].predicted = ~pred; - - /* Successfully popullated one entry */ - u_index++; - r_index++; } + u_index++; + } } cpuhw->bhrb_stack.nr = u_index; -- cgit v0.10.2 From 691231846cebfe1fbbcf898c8af17a569dbb5463 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Mon, 13 May 2013 18:44:58 +0000 Subject: powerpc/perf: Fix setting of "to" addresses for BHRB Currently we only set the "to" address in the branch stack when the CPU explicitly gives us a value. Unfortunately it only does this for XL form branches (eg blr, bctr, bctar) and not I and B form branches (eg b, bc). Fortunately if we read the instruction from memory we can extract the offset of a branch and calculate the target address. This adds a function power_pmu_bhrb_to() to calculate the target/to address of the corresponding I and B form branches. It handles branches in both user and kernel spaces. It also plumbs this into the perf brhb reading code. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index 3fdfe45..426180b 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -13,11 +13,13 @@ #include #include #include +#include #include #include #include #include #include +#include #define BHRB_MAX_ENTRIES 32 #define BHRB_TARGET 0x0000000000000002 @@ -362,6 +364,32 @@ void power_pmu_flush_branch_stack(void) if (ppmu->bhrb_nr) power_pmu_bhrb_reset(); } +/* Calculate the to address for a branch */ +static __u64 power_pmu_bhrb_to(u64 addr) +{ + unsigned int instr; + int ret; + __u64 target; + + if (is_kernel_addr(addr)) + return branch_target((unsigned int *)addr); + + /* Userspace: need copy instruction here then translate it */ + pagefault_disable(); + ret = __get_user_inatomic(instr, (unsigned int __user *)addr); + if (ret) { + pagefault_enable(); + return 0; + } + pagefault_enable(); + + target = branch_target(&instr); + if ((!target) || (instr & BRANCH_ABSOLUTE)) + return target; + + /* Translate relative branch target from kernel to user address */ + return target - (unsigned long)&instr + addr; +} /* Processing BHRB entries */ void power_pmu_bhrb_read(struct cpu_hw_events *cpuhw) @@ -426,7 +454,8 @@ void power_pmu_bhrb_read(struct cpu_hw_events *cpuhw) /* Branches to immediate field (ie I or B form) */ cpuhw->bhrb_entries[u_index].from = addr; - cpuhw->bhrb_entries[u_index].to = 0; + cpuhw->bhrb_entries[u_index].to = + power_pmu_bhrb_to(addr); cpuhw->bhrb_entries[u_index].mispred = pred; cpuhw->bhrb_entries[u_index].predicted = ~pred; } -- cgit v0.10.2 From 972be324fe0adaa67717407510aa067a4ae53d2d Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 14 May 2013 09:06:17 +0200 Subject: microblaze: Initialize temp variable to remove compilation warning Compilation warning: arch/microblaze/kernel/cpu/cache.c:148:2: warning: 'temp' is used uninitialized in this function [-Wuninitialized] Signed-off-by: Michal Simek diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c index 4254514b..a6e4441 100644 --- a/arch/microblaze/kernel/cpu/cache.c +++ b/arch/microblaze/kernel/cpu/cache.c @@ -140,7 +140,7 @@ do { \ /* It is used only first parameter for OP - for wic, wdc */ #define CACHE_RANGE_LOOP_1(start, end, line_length, op) \ do { \ - int volatile temp; \ + int volatile temp = 0; \ int align = ~(line_length - 1); \ end = ((end & align) == end) ? end - line_length : end & align; \ WARN_ON(end - start < 0); \ -- cgit v0.10.2 From eccaf52fee8305d5207ff110950a82c100e459bc Mon Sep 17 00:00:00 2001 From: "Lee, Chun-Yi" Date: Thu, 2 May 2013 22:07:01 +0800 Subject: x86, efi: initial the local variable of DataSize to zero That will be better initial the value of DataSize to zero for the input of GetVariable(), otherwise we will feed a random value. The debug log of input DataSize like this: ... [ 195.915612] EFI Variables Facility v0.08 2004-May-17 [ 195.915819] efi: size: 18446744071581821342 [ 195.915969] efi: size': 18446744071581821342 [ 195.916324] efi: size: 18446612150714306560 [ 195.916632] efi: size': 18446612150714306560 [ 195.917159] efi: size: 18446612150714306560 [ 195.917453] efi: size': 18446612150714306560 ... The size' is value that was returned by BIOS. After applied this patch: [ 82.442042] EFI Variables Facility v0.08 2004-May-17 [ 82.442202] efi: size: 0 [ 82.442360] efi: size': 1039 [ 82.443828] efi: size: 0 [ 82.444127] efi: size': 2616 [ 82.447057] efi: size: 0 [ 82.447356] efi: size': 5832 ... Found on Acer Aspire V3 BIOS, it will not return the size of data if we input a non-zero DataSize. Cc: Matthew Garrett Cc: H. Peter Anvin Signed-off-by: Lee, Chun-Yi Signed-off-by: Matt Fleming diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 55856b2..82089d8 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -206,7 +206,7 @@ static efi_status_t virt_efi_get_next_variable(unsigned long *name_size, } if (boot_used_size && !finished) { - unsigned long size; + unsigned long size = 0; u32 attr; efi_status_t s; void *tmp; -- cgit v0.10.2 From e34166ad63eac4d0fa98b4c4ed7a98202a18faef Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 14 May 2013 17:02:11 +1000 Subject: powerpc: Set show_unhandled_signals to 1 by default Just like other architectures Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index d63b502..577a8aa 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -25,7 +25,7 @@ * through debug.exception-trace sysctl. */ -int show_unhandled_signals = 0; +int show_unhandled_signals = 1; /* * Allocate space for the signal frame -- cgit v0.10.2 From 3210c05327e2b44b3bf96bab550d72cdb18b64e4 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 8 May 2013 14:29:01 +0100 Subject: ARM: ux500: Remove duplicated assignment of ab8500_platdata Since: "05ec260 mfd: db8500-prcmu: update resource passing", the AB8500's platform data 'ab8500_platdata' is passed directly as an attribute to 'db8500_prcmu_pdata', so there's no requirement to assign it a second time. In fact, it's only due to an ordering issue that the entire 'db8500_prcmu_pdata' data structure isn't completely over-written by the assignment in u8500_init_devices(). Signed-off-by: Lee Jones Signed-off-by: Linus Walleij diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 3cd555a..78389de 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -623,7 +623,7 @@ static void __init mop500_init_machine(void) sdi0_reg_info.gpios[0].gpio = GPIO_SDMMC_1V8_3V_SEL; mop500_pinmaps_init(); - parent = u8500_init_devices(&ab8500_platdata); + parent = u8500_init_devices(); for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) mop500_platform_devs[i]->dev.parent = parent; @@ -660,7 +660,7 @@ static void __init snowball_init_machine(void) sdi0_reg_info.gpios[0].gpio = SNOWBALL_SDMMC_1V8_3V_GPIO; snowball_pinmaps_init(); - parent = u8500_init_devices(&ab8500_platdata); + parent = u8500_init_devices(); for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++) snowball_platform_devs[i]->dev.parent = parent; @@ -698,7 +698,7 @@ static void __init hrefv60_init_machine(void) sdi0_reg_info.gpios[0].gpio = HREFV60_SDMMC_1V8_3V_GPIO; hrefv60_pinmaps_init(); - parent = u8500_init_devices(&ab8500_platdata); + parent = u8500_init_devices(); for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) mop500_platform_devs[i]->dev.parent = parent; diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index e90b5ab..8894327 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -206,7 +206,7 @@ static struct device * __init db8500_soc_device_init(void) /* * This function is called from the board init */ -struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) +struct device * __init u8500_init_devices(void) { struct device *parent; int i; @@ -220,8 +220,6 @@ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) for (i = 0; i < ARRAY_SIZE(platform_devs); i++) platform_devs[i]->dev.parent = parent; - db8500_prcmu_device.dev.platform_data = ab8500; - platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); return parent; diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h index bddce2b..cad3ca8 100644 --- a/arch/arm/mach-ux500/setup.h +++ b/arch/arm/mach-ux500/setup.h @@ -18,7 +18,7 @@ void __init ux500_map_io(void); extern void __init u8500_map_io(void); -extern struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500); +extern struct device * __init u8500_init_devices(void); extern void __init ux500_init_irq(void); extern void __init ux500_init_late(void); -- cgit v0.10.2 From ea63a11027103372f56bd2d9ee3c525be6edc9c1 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 8 May 2013 14:29:05 +0100 Subject: ARM: ux500: Fix incorrect DEBUG UART virtual addresses A recent move to rid header files which were hindering multiplatform support forced address allocations out of the headers and into the files which were using them. We also lost some useful macros such as IO_ADDRESS(), so physical -> virtual addressing has been carried out manually in this case. Unfortunately the incorrect value was converted. This patch rectifies the error and ensures earlyprintk works again. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij diff --git a/arch/arm/include/debug/ux500.S b/arch/arm/include/debug/ux500.S index 2848857..fbd24be 100644 --- a/arch/arm/include/debug/ux500.S +++ b/arch/arm/include/debug/ux500.S @@ -24,9 +24,9 @@ #define U8500_UART0_PHYS_BASE (0x80120000) #define U8500_UART1_PHYS_BASE (0x80121000) #define U8500_UART2_PHYS_BASE (0x80007000) -#define U8500_UART0_VIRT_BASE (0xa8120000) -#define U8500_UART1_VIRT_BASE (0xa8121000) -#define U8500_UART2_VIRT_BASE (0xa8007000) +#define U8500_UART0_VIRT_BASE (0xf8120000) +#define U8500_UART1_VIRT_BASE (0xf8121000) +#define U8500_UART2_VIRT_BASE (0xf8007000) #define __UX500_PHYS_UART(n) U8500_UART##n##_PHYS_BASE #define __UX500_VIRT_UART(n) U8500_UART##n##_VIRT_BASE #endif -- cgit v0.10.2 From 7d2b64f9832d7cb971141703219b3dc495bb9332 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 8 May 2013 14:29:06 +0100 Subject: ARM: ux500: Provide device enumeration number suffix for SMSC911x First Ethernet device has a ".0" appended onto the device name. Since on a non-DT boot the ethernet will be named "smsc911x.0" and since the clocks are not converted to device tree these names need to be matched when providing the name from auxdata. Signed-off-by: Lee Jones [edited commit message] Signed-off-by: Linus Walleij diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 8894327..46cca52 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -276,7 +276,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL), OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", &db8500_prcmu_pdata), - OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x", NULL), + OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x.0", NULL), /* Requires device name bindings. */ OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE, "pinctrl-db8500", NULL), -- cgit v0.10.2 From 2fcad12eb4d80b174c69bfbc34d1c094ad37e1bd Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 8 May 2013 14:29:07 +0100 Subject: pinctrl: abx500: Specify failed sub-driver by ID instead of driver_data If a sub-driver has not been specified correctly, there is a good chance that plat_id is NULL, hence using an attribute of plat_id in the error message is likely to not only fail the driver but Oops the kernel. Use the failed ID instead. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-abx500.c b/drivers/pinctrl/pinctrl-abx500.c index aa17f75..2a2a9df 100644 --- a/drivers/pinctrl/pinctrl-abx500.c +++ b/drivers/pinctrl/pinctrl-abx500.c @@ -900,8 +900,7 @@ static int abx500_gpio_probe(struct platform_device *pdev) abx500_pinctrl_ab8505_init(&pct->soc); break; default: - dev_err(&pdev->dev, "Unsupported pinctrl sub driver (%d)\n", - (int) platid->driver_data); + dev_err(&pdev->dev, "Unsupported pinctrl sub driver (%d)\n", id); mutex_destroy(&pct->lock); return -EINVAL; } -- cgit v0.10.2 From 86c976e43da417e341bee30ee734b89743ebe7e8 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 8 May 2013 14:29:08 +0100 Subject: pinctrl: abx500: Rejiggle platform data and DT initialisation Platform Data is invariably populated for this driver, even when booting with Device Tree. Thus the Device Tree probing code encased within the first check for Platform Data will never executed, causing the driver to fail when DT is enabled. This patch fixes the aforementioned regression by rejigging the probe() semantics to attempt to extract a platform ID from Device Tree if one can not be sourced from platform data. A pointer to GPIO platform data is always passed to the driver now, so there's little point in checking for 'pdata' and executing the DT case if it's not there. The difference between booting with DT and !DT is when booting with DT, plat_id is not populated. Thus, in the DT case we have to use a DT match table in order to find out which platform we're executing on. So, we're changing the semantics here to only use the match table if no plat_id is supplied though platform data. Signed-off-by: Lee Jones [edited commit message] Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-abx500.c b/drivers/pinctrl/pinctrl-abx500.c index 2a2a9df..6d45327 100644 --- a/drivers/pinctrl/pinctrl-abx500.c +++ b/drivers/pinctrl/pinctrl-abx500.c @@ -851,23 +851,12 @@ static int abx500_gpio_probe(struct platform_device *pdev) if (abx500_pdata) pdata = abx500_pdata->gpio; - if (!pdata) { - if (np) { - const struct of_device_id *match; - match = of_match_device(abx500_gpio_match, &pdev->dev); - if (!match) - return -ENODEV; - id = (unsigned long)match->data; - } else { - dev_err(&pdev->dev, "gpio dt and platform data missing\n"); - return -ENODEV; - } + if (!(pdata || np)) { + dev_err(&pdev->dev, "gpio dt and platform data missing\n"); + return -ENODEV; } - if (platid) - id = platid->driver_data; - pct = devm_kzalloc(&pdev->dev, sizeof(struct abx500_pinctrl), GFP_KERNEL); if (pct == NULL) { @@ -882,6 +871,16 @@ static int abx500_gpio_probe(struct platform_device *pdev) pct->chip.dev = &pdev->dev; pct->chip.base = (np) ? -1 : pdata->gpio_base; + if (platid) + id = platid->driver_data; + else if (np) { + const struct of_device_id *match; + + match = of_match_device(abx500_gpio_match, &pdev->dev); + if (match) + id = (unsigned long)match->data; + } + /* initialize the lock */ mutex_init(&pct->lock); -- cgit v0.10.2 From 99758dec9507fa1c5723c926626499e895679c40 Mon Sep 17 00:00:00 2001 From: Marc Dietrich Date: Mon, 29 Apr 2013 23:14:50 +0200 Subject: staging: nvec: add missing module aliases Keyboard and mouse drivers were missing MODULE_ALIAS definitions. This fixes auto module loading of these drivers. Signed-off-by: Marc Dietrich Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/nvec/nvec_kbd.c b/drivers/staging/nvec/nvec_kbd.c index 7445ce6..fdbe0f3 100644 --- a/drivers/staging/nvec/nvec_kbd.c +++ b/drivers/staging/nvec/nvec_kbd.c @@ -188,4 +188,5 @@ module_platform_driver(nvec_kbd_driver); MODULE_AUTHOR("Marc Dietrich "); MODULE_DESCRIPTION("NVEC keyboard driver"); +MODULE_ALIAS("platform:nvec-kbd"); MODULE_LICENSE("GPL"); diff --git a/drivers/staging/nvec/nvec_ps2.c b/drivers/staging/nvec/nvec_ps2.c index aff6b9b..abb03f0 100644 --- a/drivers/staging/nvec/nvec_ps2.c +++ b/drivers/staging/nvec/nvec_ps2.c @@ -179,4 +179,5 @@ module_platform_driver(nvec_mouse_driver); MODULE_DESCRIPTION("NVEC mouse driver"); MODULE_AUTHOR("Marc Dietrich "); +MODULE_ALIAS("platform:nvec-mouse"); MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 111c158787b2a2036c444f735370cb6aef823f78 Mon Sep 17 00:00:00 2001 From: Marc Dietrich Date: Mon, 29 Apr 2013 23:14:51 +0200 Subject: staging: nvec: implement unregistering of notifiers This implements the unregistering of notifiers so kernel modules can be unloaded. Signed-off-by: Marc Dietrich Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c index 954c992..51a123e 100644 --- a/drivers/staging/nvec/nvec.c +++ b/drivers/staging/nvec/nvec.c @@ -124,6 +124,20 @@ int nvec_register_notifier(struct nvec_chip *nvec, struct notifier_block *nb, EXPORT_SYMBOL_GPL(nvec_register_notifier); /** + * nvec_unregister_notifier - Unregister a notifier with nvec + * @nvec: A &struct nvec_chip + * @nb: The notifier block to unregister + * + * Unregisters a notifier with @nvec. The notifier will be removed from the + * atomic notifier chain. + */ +int nvec_unregister_notifier(struct nvec_chip *nvec, struct notifier_block *nb) +{ + return atomic_notifier_chain_unregister(&nvec->notifier_list, nb); +} +EXPORT_SYMBOL_GPL(nvec_unregister_notifier); + +/** * nvec_status_notifier - The final notifier * * Prints a message about control events not handled in the notifier diff --git a/drivers/staging/nvec/nvec.h b/drivers/staging/nvec/nvec.h index b7a14bc..2b1316d 100644 --- a/drivers/staging/nvec/nvec.h +++ b/drivers/staging/nvec/nvec.h @@ -197,9 +197,8 @@ extern int nvec_register_notifier(struct nvec_chip *nvec, struct notifier_block *nb, unsigned int events); -extern int nvec_unregister_notifier(struct device *dev, - struct notifier_block *nb, - unsigned int events); +extern int nvec_unregister_notifier(struct nvec_chip *dev, + struct notifier_block *nb); extern void nvec_msg_free(struct nvec_chip *nvec, struct nvec_msg *msg); -- cgit v0.10.2 From c2b62f60f67e0375c09d3c385ba90999d39d3dce Mon Sep 17 00:00:00 2001 From: Marc Dietrich Date: Mon, 29 Apr 2013 23:14:52 +0200 Subject: staging: nvec: cleanup childs on remove Disable device functions and unregister notifier if available. The serio device must not be "kzallocated". Otherwise serio_unregister_port will fail because the device is already freed. Signed-off-by: Marc Dietrich Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c index 51a123e..0e34679 100644 --- a/drivers/staging/nvec/nvec.c +++ b/drivers/staging/nvec/nvec.c @@ -829,7 +829,7 @@ static int tegra_nvec_probe(struct platform_device *pdev) return -ENODEV; } - i2c_clk = clk_get(&pdev->dev, "div-clk"); + i2c_clk = devm_clk_get(&pdev->dev, "div-clk"); if (IS_ERR(i2c_clk)) { dev_err(nvec->dev, "failed to get controller clock\n"); return -ENODEV; @@ -916,8 +916,11 @@ static int tegra_nvec_remove(struct platform_device *pdev) nvec_toggle_global_events(nvec, false); mfd_remove_devices(nvec->dev); + nvec_unregister_notifier(nvec, &nvec->nvec_status_notifier); cancel_work_sync(&nvec->rx_work); cancel_work_sync(&nvec->tx_work); + /* FIXME: needs check wether nvec is responsible for power off */ + pm_power_off = NULL; return 0; } diff --git a/drivers/staging/nvec/nvec_kbd.c b/drivers/staging/nvec/nvec_kbd.c index fdbe0f3..a0ec52a 100644 --- a/drivers/staging/nvec/nvec_kbd.c +++ b/drivers/staging/nvec/nvec_kbd.c @@ -169,8 +169,15 @@ fail: static int nvec_kbd_remove(struct platform_device *pdev) { + struct nvec_chip *nvec = dev_get_drvdata(pdev->dev.parent); + char disable_kbd[] = { NVEC_KBD, DISABLE_KBD }, + uncnfg_wake_key_reporting[] = { NVEC_KBD, CNFG_WAKE_KEY_REPORTING, + false }; + nvec_write_async(nvec, uncnfg_wake_key_reporting, 3); + nvec_write_async(nvec, disable_kbd, 2); + nvec_unregister_notifier(nvec, &keys_dev.notifier); + input_unregister_device(keys_dev.input); - input_free_device(keys_dev.input); return 0; } diff --git a/drivers/staging/nvec/nvec_power.c b/drivers/staging/nvec/nvec_power.c index 296f7b9..aacfcd6 100644 --- a/drivers/staging/nvec/nvec_power.c +++ b/drivers/staging/nvec/nvec_power.c @@ -414,6 +414,7 @@ static int nvec_power_remove(struct platform_device *pdev) struct nvec_power *power = platform_get_drvdata(pdev); cancel_delayed_work_sync(&power->poller); + nvec_unregister_notifier(power->nvec, &power->notifier); switch (pdev->id) { case AC: power_supply_unregister(&nvec_psy); diff --git a/drivers/staging/nvec/nvec_ps2.c b/drivers/staging/nvec/nvec_ps2.c index abb03f0..06dbb02 100644 --- a/drivers/staging/nvec/nvec_ps2.c +++ b/drivers/staging/nvec/nvec_ps2.c @@ -106,7 +106,7 @@ static int nvec_mouse_probe(struct platform_device *pdev) struct serio *ser_dev; char mouse_reset[] = { NVEC_PS2, SEND_COMMAND, PSMOUSE_RST, 3 }; - ser_dev = devm_kzalloc(&pdev->dev, sizeof(struct serio), GFP_KERNEL); + ser_dev = kzalloc(sizeof(struct serio), GFP_KERNEL); if (ser_dev == NULL) return -ENOMEM; @@ -133,6 +133,11 @@ static int nvec_mouse_probe(struct platform_device *pdev) static int nvec_mouse_remove(struct platform_device *pdev) { + struct nvec_chip *nvec = dev_get_drvdata(pdev->dev.parent); + + ps2_sendcommand(ps2_dev.ser_dev, DISABLE_MOUSE); + ps2_stopstreaming(ps2_dev.ser_dev); + nvec_unregister_notifier(nvec, &ps2_dev.notifier); serio_unregister_port(ps2_dev.ser_dev); return 0; -- cgit v0.10.2 From 1c7ad8f0019403bd32f457f14477e1855d93f434 Mon Sep 17 00:00:00 2001 From: Tony Prisk Date: Sat, 11 May 2013 05:45:56 +1200 Subject: pinctrl: vt8500: Fix incorrect data in WM8750 pinctrl table WMT_PIN_WAKEUP1 should be declared as WMT_PIN(0, 17) rather than WMT_PIN(0, 16). This currently generates a runtime warning because WMT_PIN_WAKEUP0 is already defined as WMT_PIN(0, 16). Signed-off-by: Tony Prisk Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/vt8500/pinctrl-wm8750.c b/drivers/pinctrl/vt8500/pinctrl-wm8750.c index b964cc5..de43262 100644 --- a/drivers/pinctrl/vt8500/pinctrl-wm8750.c +++ b/drivers/pinctrl/vt8500/pinctrl-wm8750.c @@ -53,7 +53,7 @@ static const struct wmt_pinctrl_bank_registers wm8750_banks[] = { #define WMT_PIN_EXTGPIO6 WMT_PIN(0, 6) #define WMT_PIN_EXTGPIO7 WMT_PIN(0, 7) #define WMT_PIN_WAKEUP0 WMT_PIN(0, 16) -#define WMT_PIN_WAKEUP1 WMT_PIN(0, 16) +#define WMT_PIN_WAKEUP1 WMT_PIN(0, 17) #define WMT_PIN_SD0CD WMT_PIN(0, 28) #define WMT_PIN_VDOUT0 WMT_PIN(1, 0) #define WMT_PIN_VDOUT1 WMT_PIN(1, 1) -- cgit v0.10.2 From 63ad9cbff5896dadfee510f631ffcb0176984722 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 23 Apr 2013 15:28:38 +0200 Subject: pinctrl: generic: Fix typos and clarify comments Drive strength controls both sink and source currents, clarify the description accordingly. Signed-off-by: Laurent Pinchart Signed-off-by: Linus Walleij diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index 72474e1..6aa2380 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -37,17 +37,17 @@ * if it is 0, pull-down is disabled. * @PIN_CONFIG_DRIVE_PUSH_PULL: the pin will be driven actively high and * low, this is the most typical case and is typically achieved with two - * active transistors on the output. Sending this config will enabale + * active transistors on the output. Setting this config will enable * push-pull mode, the argument is ignored. * @PIN_CONFIG_DRIVE_OPEN_DRAIN: the pin will be driven with open drain (open * collector) which means it is usually wired with other output ports - * which are then pulled up with an external resistor. Sending this - * config will enabale open drain mode, the argument is ignored. + * which are then pulled up with an external resistor. Setting this + * config will enable open drain mode, the argument is ignored. * @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source - * (open emitter). Sending this config will enabale open drain mode, the + * (open emitter). Setting this config will enable open drain mode, the * argument is ignored. - * @PIN_CONFIG_DRIVE_STRENGTH: the pin will output the current passed as - * argument. The argument is in mA. + * @PIN_CONFIG_DRIVE_STRENGTH: the pin will sink or source at most the current + * passed as argument. The argument is in mA. * @PIN_CONFIG_INPUT_SCHMITT_ENABLE: control schmitt-trigger mode on the pin. * If the argument != 0, schmitt-trigger mode is enabled. If it's 0, * schmitt-trigger mode is disabled. -- cgit v0.10.2 From 18442e65d424dc84a4a4a3b635eb1a52de3cb6b4 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 7 May 2013 20:06:19 +0800 Subject: pinctrl: single: fix error return code in pcs_parse_one_pinctrl_entry() Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Introduced by commit 9dddb4df90d136429b6d6ddefceb49a9b93f6cd1 (pinctrl: single: support generic pinconf) Signed-off-by: Wei Yongjun Acked-by: Haojian Zhuang Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c index 5f2d2bf..b9fa046 100644 --- a/drivers/pinctrl/pinctrl-single.c +++ b/drivers/pinctrl/pinctrl-single.c @@ -1166,7 +1166,8 @@ static int pcs_parse_one_pinctrl_entry(struct pcs_device *pcs, (*map)->data.mux.function = np->name; if (pcs->is_pinconf) { - if (pcs_parse_pinconf(pcs, np, function, map)) + res = pcs_parse_pinconf(pcs, np, function, map); + if (res) goto free_pingroups; *num_maps = 2; } else { -- cgit v0.10.2 From 9349d00fc3ff2b110dc07d9f5d06abfeac300c19 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Tue, 7 May 2013 22:06:57 +0200 Subject: ARM: at91/trivial: fix model name for SAM9X25-EK Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre Cc: stable # 3.8+ diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts index 3b40d11..315250b 100644 --- a/arch/arm/boot/dts/at91sam9x25ek.dts +++ b/arch/arm/boot/dts/at91sam9x25ek.dts @@ -11,7 +11,7 @@ /include/ "at91sam9x5ek.dtsi" / { - model = "Atmel AT91SAM9G25-EK"; + model = "Atmel AT91SAM9X25-EK"; compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; ahb { -- cgit v0.10.2 From 5ade7e4214b43e9b934202d892e3d7c131617908 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 14 May 2013 15:14:49 +0200 Subject: ARM: at91/trivial: typo in GEM compatible string Signed-off-by: Nicolas Ferre diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt index 44afa0e..4ff6504 100644 --- a/Documentation/devicetree/bindings/net/macb.txt +++ b/Documentation/devicetree/bindings/net/macb.txt @@ -4,7 +4,7 @@ Required properties: - compatible: Should be "cdns,[-]{macb|gem}" Use "cdns,at91sam9260-macb" Atmel at91sam9260 and at91sam9263 SoCs. Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb". - Use "cnds,pc302-gem" for Picochip picoXcell pc302 and later devices based on + Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on the Cadence GEM, or the generic form: "cdns,gem". - reg: Address and length of the register set for the device - interrupts: Should contain macb interrupt diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 2e643ea..5fce96b 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -156,7 +156,7 @@ }; macb0: ethernet@f0028000 { - compatible = "cnds,pc302-gem", "cdns,gem"; + compatible = "cdns,pc302-gem", "cdns,gem"; reg = <0xf0028000 0x100>; interrupts = <34 4 3>; pinctrl-names = "default"; -- cgit v0.10.2 From 3f81127293284da449942a0144b9747c5db1e523 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Wed, 24 Apr 2013 15:56:48 +0200 Subject: ARM: at91: dts: request only spi cs-gpios used on sama5d3x cpu module Instead of requesting all available spi cs-gpios, request only the ones used on the board, in our case on the cpu module. Signed-off-by: Ludovic Desroches Acked-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 5fce96b..5000e0d 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -75,11 +75,6 @@ compatible = "atmel,at91sam9x5-spi"; reg = <0xf0004000 0x100>; interrupts = <24 4 3>; - cs-gpios = <&pioD 13 0 - &pioD 14 0 /* conflicts with SCK0 and CANRX0 */ - &pioD 15 0 /* conflicts with CTS0 and CANTX0 */ - &pioD 16 0 /* conflicts with RTS0 and PWMFI3 */ - >; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -203,11 +198,6 @@ compatible = "atmel,at91sam9x5-spi"; reg = <0xf8008000 0x100>; interrupts = <25 4 3>; - cs-gpios = <&pioC 25 0 - &pioC 26 0 /* conflitcs with TWD1 and ISI_D11 */ - &pioC 27 0 /* conflitcs with TWCK1 and ISI_D10 */ - &pioC 28 0 /* conflitcs with PWMFI0 and ISI_D9 */ - >; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index 1f8ed40..b336e77 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -32,6 +32,10 @@ ahb { apb { + spi0: spi@f0004000 { + cs-gpios = <&pioD 13 0>, <0>, <0>, <0>; + }; + macb0: ethernet@f0028000 { phy-mode = "rgmii"; }; -- cgit v0.10.2 From c560ecfe9617c629ad09b07edb7523c87b2c9619 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 14 May 2013 10:51:18 +0100 Subject: arm64: Invoke the of_platform_populate() at arch_initcall() level The of_platform_populate() is currently invoked at device_initcall() level. There are however drivers that use platform_driver_probe() directly and they need the devices to be populated. This patch makes the of_platform_populate() and arch_initcall(). Signed-off-by: Catalin Marinas Reported-by: Benoit Lecardonnel Tested-by: Benoit Lecardonnel diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c index 6a9a532..add6ea6 100644 --- a/arch/arm64/kernel/setup.c +++ b/arch/arm64/kernel/setup.c @@ -282,12 +282,13 @@ void __init setup_arch(char **cmdline_p) #endif } -static int __init arm64_of_clk_init(void) +static int __init arm64_device_init(void) { of_clk_init(NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); return 0; } -arch_initcall(arm64_of_clk_init); +arch_initcall(arm64_device_init); static DEFINE_PER_CPU(struct cpu, cpu_data); @@ -305,13 +306,6 @@ static int __init topology_init(void) } subsys_initcall(topology_init); -static int __init arm64_device_probe(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - return 0; -} -device_initcall(arm64_device_probe); - static const char *hwcap_str[] = { "fp", "asimd", -- cgit v0.10.2 From b4fed0796841b5293b9c9427a5391b7bb20ef2d9 Mon Sep 17 00:00:00 2001 From: Sukanto Ghosh Date: Tue, 14 May 2013 10:26:54 +0100 Subject: arm64: mm: Fix operands of clz in __flush_dcache_all The format of the lower 32-bits of the 64-bit operand to 'dc cisw' is unchanged from ARMv7 architecture and the upper bits are RES0. This implies that the 'way' field of the operand of 'dc cisw' occupies the bit-positions [31 .. (32-A)]. Due to the use of 64-bit extended operands to 'clz', the existing implementation of __flush_dcache_all is incorrectly placing the 'way' field in the bit-positions [63 .. (64-A)]. Signed-off-by: Sukanto Ghosh Tested-by: Anup Patel Signed-off-by: Catalin Marinas Cc: stable@vger.kernel.org diff --git a/arch/arm64/mm/cache.S b/arch/arm64/mm/cache.S index abe69b8..48a3860 100644 --- a/arch/arm64/mm/cache.S +++ b/arch/arm64/mm/cache.S @@ -52,7 +52,7 @@ loop1: add x2, x2, #4 // add 4 (line length offset) mov x4, #0x3ff and x4, x4, x1, lsr #3 // find maximum number on the way size - clz x5, x4 // find bit position of way size increment + clz w5, w4 // find bit position of way size increment mov x7, #0x7fff and x7, x7, x1, lsr #13 // extract max number of the index size loop2: -- cgit v0.10.2 From 02e3cba685efe61f0c3b10f1622c6a229ac93a61 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 14 May 2013 12:22:06 +0100 Subject: arm64: Do not source kernel/time/Kconfig explicitly As per commit 764e0da1 (timers: Fixup the Kconfig consolidation fallout), init/Kconfig already includes kernel/time/Kconfig, so no need to do it explicitly for arm64. Signed-off-by: Catalin Marinas diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 48347dc..56b3f6d 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -122,8 +122,6 @@ endmenu menu "Kernel Features" -source "kernel/time/Kconfig" - config ARM64_64K_PAGES bool "Enable 64KB pages support" help -- cgit v0.10.2 From d6cbf35dac8a3dadb9103379820c96d7c85df3d9 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 14 May 2013 19:44:20 +0800 Subject: cgroup: initialize xattr before calling d_instantiate() cgroup_create_file() calls d_instantiate(), which may decide to look at the xattrs on the file. Smack always does this and SELinux can be configured to do so. But cgroup_add_file() didn't initialize xattrs before calling cgroup_create_file(), which finally leads to dereferencing NULL dentry->d_fsdata. This bug has been there since cgroup xattr was introduced. Cc: # 3.8.x Reported-by: Ivan Bulatovic Reported-by: Casey Schaufler Signed-off-by: Li Zefan Signed-off-by: Tejun Heo diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 2a99262..38b1365 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -2699,13 +2699,14 @@ static int cgroup_add_file(struct cgroup *cgrp, struct cgroup_subsys *subsys, goto out; } + cfe->type = (void *)cft; + cfe->dentry = dentry; + dentry->d_fsdata = cfe; + simple_xattrs_init(&cfe->xattrs); + mode = cgroup_file_mode(cft); error = cgroup_create_file(dentry, mode | S_IFREG, cgrp->root->sb); if (!error) { - cfe->type = (void *)cft; - cfe->dentry = dentry; - dentry->d_fsdata = cfe; - simple_xattrs_init(&cfe->xattrs); list_add_tail(&cfe->node, &parent->files); cfe = NULL; } -- cgit v0.10.2 From f7ea0fd639c2c48d3c61b6eec75362be290c6874 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 13 May 2013 21:40:27 +0200 Subject: tick: Don't invoke tick_nohz_stop_sched_tick() if the cpu is offline commit 5b39939a4 (nohz: Move ts->idle_calls incrementation into strict idle logic) moved code out of tick_nohz_stop_sched_tick() and missed to bail out when the cpu is offline. That's causing subsequent failures as an offline CPU is supposed to die and not to fiddle with nohz magic. Return false in can_stop_idle_tick() if the cpu is offline. Reported-and-tested-by: Jiri Kosina Reported-and-tested-by: Prarit Bhargava Cc: Frederic Weisbecker Cc: Borislav Petkov Cc: Tony Luck Cc: x86@kernel.org Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1305132138160.2863@ionos Signed-off-by: Thomas Gleixner diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 0eed1db..0121421 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -469,6 +469,7 @@ static bool can_stop_idle_tick(int cpu, struct tick_sched *ts) if (unlikely(!cpu_online(cpu))) { if (cpu == tick_do_timer_cpu) tick_do_timer_cpu = TICK_DO_TIMER_NONE; + return false; } if (unlikely(ts->nohz_mode == NOHZ_MODE_INACTIVE)) -- cgit v0.10.2 From b47430d3adbedbfdb5979ba4874f5dadf94f16b1 Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Tue, 14 May 2013 04:01:27 +0530 Subject: rcu/idle: Wrap cpu-idle poll mode within rcu_idle_enter/exit MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Bjørn Mork reported the following warning when running powertop. [ 49.289034] ------------[ cut here ]------------ [ 49.289055] WARNING: at kernel/rcutree.c:502 rcu_eqs_exit_common.isra.48+0x3d/0x125() [ 49.289244] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0-bisect-rcu-warn+ #107 [ 49.289251] ffffffff8157d8c8 ffffffff81801e28 ffffffff8137e4e3 ffffffff81801e68 [ 49.289260] ffffffff8103094f ffffffff81801e68 0000000000000000 ffff88023afcd9b0 [ 49.289268] 0000000000000000 0140000000000000 ffff88023bee7700 ffffffff81801e78 [ 49.289276] Call Trace: [ 49.289285] [] dump_stack+0x19/0x1b [ 49.289293] [] warn_slowpath_common+0x62/0x7b [ 49.289300] [] warn_slowpath_null+0x15/0x17 [ 49.289306] [] rcu_eqs_exit_common.isra.48+0x3d/0x125 [ 49.289314] [] ? trace_hardirqs_off_caller+0x37/0xa6 [ 49.289320] [] rcu_idle_exit+0x85/0xa8 [ 49.289327] [] trace_cpu_idle_rcuidle+0xae/0xff [ 49.289334] [] cpu_startup_entry+0x72/0x115 [ 49.289341] [] rest_init+0x149/0x150 [ 49.289347] [] ? csum_partial_copy_generic+0x16c/0x16c [ 49.289355] [] start_kernel+0x3f0/0x3fd [ 49.289362] [] ? repair_env_string+0x5a/0x5a [ 49.289368] [] x86_64_start_reservations+0x2a/0x2c [ 49.289375] [] x86_64_start_kernel+0xcd/0xd1 [ 49.289379] ---[ end trace 07a1cc95e29e9036 ]--- The warning is that 'rdtp->dynticks' has an unexpected value, which roughly translates to - the calls to rcu_idle_enter() and rcu_idle_exit() were not made in the correct order, or otherwise messed up. And Bjørn's painstaking debugging indicated that this happens when the idle loop enters the poll mode. Looking at the poll function cpu_idle_poll(), and the implementation of trace_cpu_idle_rcuidle(), the problem becomes very clear: cpu_idle_poll() lacks calls to rcu_idle_enter/exit(), and trace_cpu_idle_rcuidle() calls them in the reverse order - first rcu_idle_exit(), and then rcu_idle_enter(). Hence the even/odd alternative sequencing of rdtp->dynticks goes for a toss. And powertop readily triggers this because powertop uses the idle-tracing infrastructure extensively. So, to fix this, wrap the code in cpu_idle_poll() within rcu_idle_enter/exit(), so that it blends properly with the calls inside trace_cpu_idle_rcuidle() and thus get the function ordering right. Reported-and-tested-by: Bjørn Mork Cc: Paul McKenney Cc: Steven Rostedt Cc: Dipankar Sarma Signed-off-by: Srivatsa S. Bhat Link: http://lkml.kernel.org/r/519169BF.4080208@linux.vnet.ibm.com Signed-off-by: Thomas Gleixner diff --git a/kernel/cpu/idle.c b/kernel/cpu/idle.c index 8b86c0c..d5585f5 100644 --- a/kernel/cpu/idle.c +++ b/kernel/cpu/idle.c @@ -40,11 +40,13 @@ __setup("hlt", cpu_idle_nopoll_setup); static inline int cpu_idle_poll(void) { + rcu_idle_enter(); trace_cpu_idle_rcuidle(0, smp_processor_id()); local_irq_enable(); while (!need_resched()) cpu_relax(); trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id()); + rcu_idle_exit(); return 1; } -- cgit v0.10.2 From 42a5cf46cd56f46267d2a9fcf2655f4078cd3042 Mon Sep 17 00:00:00 2001 From: Tirupathi Reddy Date: Tue, 14 May 2013 13:59:02 +0530 Subject: timer: Don't reinitialize the cpu base lock during CPU_UP_PREPARE An inactive timer's base can refer to a offline cpu's base. In the current code, cpu_base's lock is blindly reinitialized each time a CPU is brought up. If a CPU is brought online during the period that another thread is trying to modify an inactive timer on that CPU with holding its timer base lock, then the lock will be reinitialized under its feet. This leads to following SPIN_BUG(). <0> BUG: spinlock already unlocked on CPU#3, kworker/u:3/1466 <0> lock: 0xe3ebe000, .magic: dead4ead, .owner: kworker/u:3/1466, .owner_cpu: 1 <4> [] (unwind_backtrace+0x0/0x11c) from [] (do_raw_spin_unlock+0x40/0xcc) <4> [] (do_raw_spin_unlock+0x40/0xcc) from [] (_raw_spin_unlock+0x8/0x30) <4> [] (_raw_spin_unlock+0x8/0x30) from [] (mod_timer+0x294/0x310) <4> [] (mod_timer+0x294/0x310) from [] (queue_delayed_work_on+0x104/0x120) <4> [] (queue_delayed_work_on+0x104/0x120) from [] (sdhci_msm_bus_voting+0x88/0x9c) <4> [] (sdhci_msm_bus_voting+0x88/0x9c) from [] (sdhci_disable+0x40/0x48) <4> [] (sdhci_disable+0x40/0x48) from [] (mmc_release_host+0x4c/0xb0) <4> [] (mmc_release_host+0x4c/0xb0) from [] (mmc_sd_detect+0x90/0xfc) <4> [] (mmc_sd_detect+0x90/0xfc) from [] (mmc_rescan+0x7c/0x2c4) <4> [] (mmc_rescan+0x7c/0x2c4) from [] (process_one_work+0x27c/0x484) <4> [] (process_one_work+0x27c/0x484) from [] (worker_thread+0x210/0x3b0) <4> [] (worker_thread+0x210/0x3b0) from [] (kthread+0x80/0x8c) <4> [] (kthread+0x80/0x8c) from [] (kernel_thread_exit+0x0/0x8) As an example, this particular crash occurred when CPU #3 is executing mod_timer() on an inactive timer whose base is refered to offlined CPU #2. The code locked the timer_base corresponding to CPU #2. Before it could proceed, CPU #2 came online and reinitialized the spinlock corresponding to its base. Thus now CPU #3 held a lock which was reinitialized. When CPU #3 finally ended up unlocking the old cpu_base corresponding to CPU #2, we hit the above SPIN_BUG(). CPU #0 CPU #3 CPU #2 ------ ------- ------- ..... ...... mod_timer() lock_timer_base spin_lock_irqsave(&base->lock) cpu_up(2) ..... ...... init_timers_cpu() .... ..... spin_lock_init(&base->lock) ..... spin_unlock_irqrestore(&base->lock) ...... Allocation of per_cpu timer vector bases is done only once under "tvec_base_done[]" check. In the current code, spinlock_initialization of base->lock isn't under this check. When a CPU is up each time the base lock is reinitialized. Move base spinlock initialization under the check. Signed-off-by: Tirupathi Reddy Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1368520142-4136-1-git-send-email-tirupath@codeaurora.org Signed-off-by: Thomas Gleixner diff --git a/kernel/timer.c b/kernel/timer.c index 09bca8c..7376589 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -1539,12 +1539,12 @@ static int __cpuinit init_timers_cpu(int cpu) boot_done = 1; base = &boot_tvec_bases; } + spin_lock_init(&base->lock); tvec_base_done[cpu] = 1; } else { base = per_cpu(tvec_bases, cpu); } - spin_lock_init(&base->lock); for (j = 0; j < TVN_SIZE; j++) { INIT_LIST_HEAD(base->tv5.vec + j); -- cgit v0.10.2 From de82b923012ff8790bcfff381eb3ca9069d00f49 Mon Sep 17 00:00:00 2001 From: Brian Foster Date: Tue, 14 May 2013 11:25:39 -0400 Subject: fuse: allocate for_background dio requests based on io->async state Commit 8b41e671 introduced explicit background checking for fuse_req structures with BUG_ON() checks for the appropriate type of request in in the associated send functions. Commit bcba24cc introduced the ability to send dio requests as background requests but does not update the request allocation based on the type of I/O request. As a result, a BUG_ON() triggers in the fuse_request_send_background() background path if an async I/O is sent. Allocate a request based on the async state of the fuse_io_priv to avoid the BUG. Signed-off-by: Brian Foster Signed-off-by: Miklos Szeredi diff --git a/fs/fuse/file.c b/fs/fuse/file.c index d1c9b85..fe19132 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -1278,7 +1278,10 @@ ssize_t fuse_direct_io(struct fuse_io_priv *io, const struct iovec *iov, iov_iter_init(&ii, iov, nr_segs, count, 0); - req = fuse_get_req(fc, fuse_iter_npages(&ii)); + if (io->async) + req = fuse_get_req_for_background(fc, fuse_iter_npages(&ii)); + else + req = fuse_get_req(fc, fuse_iter_npages(&ii)); if (IS_ERR(req)) return PTR_ERR(req); @@ -1314,7 +1317,11 @@ ssize_t fuse_direct_io(struct fuse_io_priv *io, const struct iovec *iov, break; if (count) { fuse_put_request(fc, req); - req = fuse_get_req(fc, fuse_iter_npages(&ii)); + if (io->async) + req = fuse_get_req_for_background(fc, + fuse_iter_npages(&ii)); + else + req = fuse_get_req(fc, fuse_iter_npages(&ii)); if (IS_ERR(req)) break; } -- cgit v0.10.2 From 6faf72834d9d0c0dc6632604eaeffb621e87fcf9 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Mon, 13 May 2013 06:53:37 -0700 Subject: rcu: Fix comparison sense in rcu_needs_cpu() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit c0f4dfd4f (rcu: Make RCU_FAST_NO_HZ take advantage of numbered callbacks) introduced a bug that can result in excessively long grace periods. This bug reverse the senes of the "if" statement checking for lazy callbacks, so that RCU takes a lazy approach when there are in fact non-lazy callbacks. This can result in excessive boot, suspend, and resume times. This commit therefore fixes the sense of this "if" statement. Reported-by: Borislav Petkov Reported-by: Bjørn Mork Reported-by: Joerg Roedel Signed-off-by: Paul E. McKenney Tested-by: Bjørn Mork Tested-by: Joerg Roedel diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h index 170814d..6d939a6 100644 --- a/kernel/rcutree_plugin.h +++ b/kernel/rcutree_plugin.h @@ -1667,7 +1667,7 @@ int rcu_needs_cpu(int cpu, unsigned long *dj) rdtp->last_accelerate = jiffies; /* Request timer delay depending on laziness, and round. */ - if (rdtp->all_lazy) { + if (!rdtp->all_lazy) { *dj = round_up(rcu_idle_gp_delay + jiffies, rcu_idle_gp_delay) - jiffies; } else { -- cgit v0.10.2 From 8c3d3d4b12bf8de8c59fe1eb1bf866a8676ca309 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 14 May 2013 11:09:50 -0700 Subject: libata: update "Maintained by:" tags Jeff moved on to a greener pasture. s/Maintained by: Jeff Garzik/Maintained by: Tejun Heo/g Signed-off-by: Tejun Heo Cc: Jeff Garzik diff --git a/drivers/ata/acard-ahci.c b/drivers/ata/acard-ahci.c index 4e94ba2..9d0cf01 100644 --- a/drivers/ata/acard-ahci.c +++ b/drivers/ata/acard-ahci.c @@ -2,7 +2,7 @@ /* * acard-ahci.c - ACard AHCI SATA support * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 251e57d..2180876 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1,7 +1,7 @@ /* * ahci.c - AHCI SATA support * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index b830e6c..10b14d4 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -1,7 +1,7 @@ /* * ahci.h - Common AHCI SATA definitions and declarations * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 2f48123..26bda6e 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1,7 +1,7 @@ /* * ata_piix.c - Intel PATA/SATA controllers * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 34c8216..a70ff15 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -1,7 +1,7 @@ /* * libahci.c - Common AHCI SATA low-level routines * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 63c743b..d35524c 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1,7 +1,7 @@ /* * libata-core.c - helper library for ATA * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index f9476fb..c69fcce 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1,7 +1,7 @@ /* * libata-eh.c - libata error handling * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index dd310b27..0101af5 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1,7 +1,7 @@ /* * libata-scsi.c - helper library for ATA * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index d8af325..b603720 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -1,7 +1,7 @@ /* * libata-sff.c - helper library for PCI IDE BMDMA * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c index 5053333..8ea6e6a 100644 --- a/drivers/ata/pdc_adma.c +++ b/drivers/ata/pdc_adma.c @@ -1,7 +1,7 @@ /* * pdc_adma.c - Pacific Digital Corporation ADMA * - * Maintained by: Mark Lord + * Maintained by: Tejun Heo * * Copyright 2005 Mark Lord * diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index fb0dd87..958ba2a 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -1,7 +1,7 @@ /* * sata_promise.c - Promise SATA * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Mikael Pettersson * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index a7b3167..0ae3ca4 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -1,7 +1,7 @@ /* * sata_sil.c - Silicon Image SATA * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index 7b7127a..9947010 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -1,7 +1,7 @@ /* * sata_sx4.c - Promise SATA * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 5913ea9..87f056e 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -1,7 +1,7 @@ /* * sata_via.c - VIA Serial ATA controllers * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * -- cgit v0.10.2 From 44f3b503c16425c8e9db4bbaa2fc9cd0c9d0ba91 Mon Sep 17 00:00:00 2001 From: Nithin Sujir Date: Mon, 13 May 2013 11:04:15 +0000 Subject: tg3: Skip powering down function 0 on certain serdes devices On the 5718, 5719 and 5720 serdes devices, powering down function 0 results in all the other ports being powered down. Add code to skip function 0 power down. v2: - Modify tg3_phy_power_bug() function to use a switch instead of a complicated if statement. Suggested by Joe Perches. Cc: Signed-off-by: Michael Chan Signed-off-by: Nithin Nayak Sujir Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 728d42a..781be76 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -2957,6 +2957,31 @@ static int tg3_5700_link_polarity(struct tg3 *tp, u32 speed) return 0; } +static bool tg3_phy_power_bug(struct tg3 *tp) +{ + switch (tg3_asic_rev(tp)) { + case ASIC_REV_5700: + case ASIC_REV_5704: + return true; + case ASIC_REV_5780: + if (tp->phy_flags & TG3_PHYFLG_MII_SERDES) + return true; + return false; + case ASIC_REV_5717: + if (!tp->pci_fn) + return true; + return false; + case ASIC_REV_5719: + case ASIC_REV_5720: + if ((tp->phy_flags & TG3_PHYFLG_PHY_SERDES) && + !tp->pci_fn) + return true; + return false; + } + + return false; +} + static void tg3_power_down_phy(struct tg3 *tp, bool do_low_power) { u32 val; @@ -3016,12 +3041,7 @@ static void tg3_power_down_phy(struct tg3 *tp, bool do_low_power) /* The PHY should not be powered down on some chips because * of bugs. */ - if (tg3_asic_rev(tp) == ASIC_REV_5700 || - tg3_asic_rev(tp) == ASIC_REV_5704 || - (tg3_asic_rev(tp) == ASIC_REV_5780 && - (tp->phy_flags & TG3_PHYFLG_MII_SERDES)) || - (tg3_asic_rev(tp) == ASIC_REV_5717 && - !tp->pci_fn)) + if (tg3_phy_power_bug(tp)) return; if (tg3_chip_rev(tp) == CHIPREV_5784_AX || -- cgit v0.10.2 From 0f0d15100a8ac875bdd408324c473e16d73d3557 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 13 May 2013 11:04:16 +0000 Subject: tg3: Fix data corruption on 5725 with TSO The 5725 family of devices (asic rev 5762), corrupts TSO packets where the buffer is within MSS bytes of a 4G boundary (4G, 8G etc.). Detect this condition and trigger the workaround path. Cc: Signed-off-by: Michael Chan Signed-off-by: Nithin Nayak Sujir Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 781be76..e285d76 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -7448,6 +7448,20 @@ static inline int tg3_4g_overflow_test(dma_addr_t mapping, int len) return (base > 0xffffdcc0) && (base + len + 8 < base); } +/* Test for TSO DMA buffers that cross into regions which are within MSS bytes + * of any 4GB boundaries: 4G, 8G, etc + */ +static inline int tg3_4g_tso_overflow_test(struct tg3 *tp, dma_addr_t mapping, + u32 len, u32 mss) +{ + if (tg3_asic_rev(tp) == ASIC_REV_5762 && mss) { + u32 base = (u32) mapping & 0xffffffff; + + return ((base + len + (mss & 0x3fff)) < base); + } + return 0; +} + /* Test for DMA addresses > 40-bit */ static inline int tg3_40bit_overflow_test(struct tg3 *tp, dma_addr_t mapping, int len) @@ -7484,6 +7498,9 @@ static bool tg3_tx_frag_set(struct tg3_napi *tnapi, u32 *entry, u32 *budget, if (tg3_4g_overflow_test(map, len)) hwbug = true; + if (tg3_4g_tso_overflow_test(tp, map, len, mss)) + hwbug = true; + if (tg3_40bit_overflow_test(tp, map, len)) hwbug = true; -- cgit v0.10.2 From c14ff2ea2d5818c811e5c6e67e794df4a71a6094 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 13 May 2013 11:58:31 +0000 Subject: sfc: Delete EFX_PAGE_IP_ALIGN, equivalent to NET_IP_ALIGN The two architectures that define CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS (powerpc and x86) now both define NET_IP_ALIGN as 0, so there is no need for this optimisation any more. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c index 01b9920..999289b 100644 --- a/drivers/net/ethernet/sfc/efx.c +++ b/drivers/net/ethernet/sfc/efx.c @@ -638,13 +638,13 @@ static void efx_start_datapath(struct efx_nic *efx) EFX_MAX_FRAME_LEN(efx->net_dev->mtu) + efx->type->rx_buffer_padding); rx_buf_len = (sizeof(struct efx_rx_page_state) + - EFX_PAGE_IP_ALIGN + efx->rx_dma_len); + NET_IP_ALIGN + efx->rx_dma_len); if (rx_buf_len <= PAGE_SIZE) { efx->rx_scatter = false; efx->rx_buffer_order = 0; } else if (efx->type->can_rx_scatter) { BUILD_BUG_ON(sizeof(struct efx_rx_page_state) + - EFX_PAGE_IP_ALIGN + EFX_RX_USR_BUF_SIZE > + NET_IP_ALIGN + EFX_RX_USR_BUF_SIZE > PAGE_SIZE / 2); efx->rx_scatter = true; efx->rx_dma_len = EFX_RX_USR_BUF_SIZE; diff --git a/drivers/net/ethernet/sfc/net_driver.h b/drivers/net/ethernet/sfc/net_driver.h index 9bd433a..5efddf3 100644 --- a/drivers/net/ethernet/sfc/net_driver.h +++ b/drivers/net/ethernet/sfc/net_driver.h @@ -468,24 +468,11 @@ enum nic_state { }; /* - * Alignment of page-allocated RX buffers - * - * Controls the number of bytes inserted at the start of an RX buffer. - * This is the equivalent of NET_IP_ALIGN [which controls the alignment - * of the skb->head for hardware DMA]. - */ -#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS -#define EFX_PAGE_IP_ALIGN 0 -#else -#define EFX_PAGE_IP_ALIGN NET_IP_ALIGN -#endif - -/* * Alignment of the skb->head which wraps a page-allocated RX buffer * * The skb allocated to wrap an rx_buffer can have this alignment. Since * the data is memcpy'd from the rx_buf, it does not need to be equal to - * EFX_PAGE_IP_ALIGN. + * NET_IP_ALIGN. */ #define EFX_PAGE_SKB_ALIGN 2 diff --git a/drivers/net/ethernet/sfc/rx.c b/drivers/net/ethernet/sfc/rx.c index e73e30b..99f70dd 100644 --- a/drivers/net/ethernet/sfc/rx.c +++ b/drivers/net/ethernet/sfc/rx.c @@ -93,7 +93,7 @@ static inline void efx_sync_rx_buffer(struct efx_nic *efx, void efx_rx_config_page_split(struct efx_nic *efx) { - efx->rx_page_buf_step = ALIGN(efx->rx_dma_len + EFX_PAGE_IP_ALIGN, + efx->rx_page_buf_step = ALIGN(efx->rx_dma_len + NET_IP_ALIGN, L1_CACHE_BYTES); efx->rx_bufs_per_page = efx->rx_buffer_order ? 1 : ((PAGE_SIZE - sizeof(struct efx_rx_page_state)) / @@ -188,9 +188,9 @@ static int efx_init_rx_buffers(struct efx_rx_queue *rx_queue) do { index = rx_queue->added_count & rx_queue->ptr_mask; rx_buf = efx_rx_buffer(rx_queue, index); - rx_buf->dma_addr = dma_addr + EFX_PAGE_IP_ALIGN; + rx_buf->dma_addr = dma_addr + NET_IP_ALIGN; rx_buf->page = page; - rx_buf->page_offset = page_offset + EFX_PAGE_IP_ALIGN; + rx_buf->page_offset = page_offset + NET_IP_ALIGN; rx_buf->len = efx->rx_dma_len; rx_buf->flags = 0; ++rx_queue->added_count; -- cgit v0.10.2 From 950c54df1e503ece4e2987b0cf6e2e4e22817c0c Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 13 May 2013 12:01:22 +0000 Subject: sfc: Reduce RX scatter buffer size, and reduce alignment if appropriate efx_start_datapath() asserts that we can fit 2 RX scatter buffers plus a software structure, each appropriately aligned, into a single page. Where L1_CACHE_BYTES == 256 and PAGE_SIZE == 4096, which is the case on s390, this assertion fails. The current scatter buffer size is also not a multiple of 64 or 128, which are more common cache line sizes. If we can make both the start and end of a scatter buffer cache-aligned, this will reduce the need for read-modify-write operations on inter- processor links. Fix the alignment by reducing EFX_RX_USR_BUF_SIZE to 2048 - 256 == 1792. (We could use 2048 - L1_CACHE_BYTES, but EFX_RX_USR_BUF_SIZE also affects user-level networking where a larger amount of housekeeping data may be needed. Although this version of the driver does not support user-level networking, I prefer to keep scattering behaviour consistent with the out-of-tree version.) This still doesn't fix the s390 build because like most architectures it has NET_IP_ALIGN == 2. When NET_IP_ALIGN != 0 we cannot achieve cache line alignment at either the start or end of a scatter buffer, so there is actually no point in padding the buffers to a multiple of the cache line size. All we need is 4-byte alignment of the network header, so do that. Adjust the assertions accordingly. Reported-by: Geert Uytterhoeven Reported-by: Heiko Carstens Signed-off-by: Ben Hutchings Acked-by: Geert Uytterhoeven Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c index 999289b..39e4cb3 100644 --- a/drivers/net/ethernet/sfc/efx.c +++ b/drivers/net/ethernet/sfc/efx.c @@ -643,9 +643,11 @@ static void efx_start_datapath(struct efx_nic *efx) efx->rx_scatter = false; efx->rx_buffer_order = 0; } else if (efx->type->can_rx_scatter) { + BUILD_BUG_ON(EFX_RX_USR_BUF_SIZE % L1_CACHE_BYTES); BUILD_BUG_ON(sizeof(struct efx_rx_page_state) + - NET_IP_ALIGN + EFX_RX_USR_BUF_SIZE > - PAGE_SIZE / 2); + 2 * ALIGN(NET_IP_ALIGN + EFX_RX_USR_BUF_SIZE, + EFX_RX_BUF_ALIGNMENT) > + PAGE_SIZE); efx->rx_scatter = true; efx->rx_dma_len = EFX_RX_USR_BUF_SIZE; efx->rx_buffer_order = 0; diff --git a/drivers/net/ethernet/sfc/net_driver.h b/drivers/net/ethernet/sfc/net_driver.h index 5efddf3..39d6bd77 100644 --- a/drivers/net/ethernet/sfc/net_driver.h +++ b/drivers/net/ethernet/sfc/net_driver.h @@ -72,8 +72,20 @@ /* Maximum possible MTU the driver supports */ #define EFX_MAX_MTU (9 * 1024) -/* Size of an RX scatter buffer. Small enough to pack 2 into a 4K page. */ -#define EFX_RX_USR_BUF_SIZE 1824 +/* Size of an RX scatter buffer. Small enough to pack 2 into a 4K page, + * and should be a multiple of the cache line size. + */ +#define EFX_RX_USR_BUF_SIZE (2048 - 256) + +/* If possible, we should ensure cache line alignment at start and end + * of every buffer. Otherwise, we just need to ensure 4-byte + * alignment of the network header. + */ +#if NET_IP_ALIGN == 0 +#define EFX_RX_BUF_ALIGNMENT L1_CACHE_BYTES +#else +#define EFX_RX_BUF_ALIGNMENT 4 +#endif /* Forward declare Precision Time Protocol (PTP) support structure. */ struct efx_ptp_data; diff --git a/drivers/net/ethernet/sfc/rx.c b/drivers/net/ethernet/sfc/rx.c index 99f70dd..a7dfe36 100644 --- a/drivers/net/ethernet/sfc/rx.c +++ b/drivers/net/ethernet/sfc/rx.c @@ -94,7 +94,7 @@ static inline void efx_sync_rx_buffer(struct efx_nic *efx, void efx_rx_config_page_split(struct efx_nic *efx) { efx->rx_page_buf_step = ALIGN(efx->rx_dma_len + NET_IP_ALIGN, - L1_CACHE_BYTES); + EFX_RX_BUF_ALIGNMENT); efx->rx_bufs_per_page = efx->rx_buffer_order ? 1 : ((PAGE_SIZE - sizeof(struct efx_rx_page_state)) / efx->rx_page_buf_step); -- cgit v0.10.2 From efee8e8712921279c3a5a687d5b65ee7fde7db89 Mon Sep 17 00:00:00 2001 From: Sarveshwar Bandi Date: Mon, 13 May 2013 20:28:20 +0000 Subject: be2net: Avoid double insertion of vlan tags. Fix to avoid double insertion of vlan tags into the packet while handling an asic workaroud (issue introduced by net next Commit bc0c340) Signed-off-by: Sarveshwar Bandi Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index a444110..ca2967b 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -780,26 +780,18 @@ static struct sk_buff *be_insert_vlan_in_pkt(struct be_adapter *adapter, if (unlikely(!skb)) return skb; - if (vlan_tx_tag_present(skb)) { + if (vlan_tx_tag_present(skb)) vlan_tag = be_get_tx_vlan_tag(adapter, skb); - skb = __vlan_put_tag(skb, htons(ETH_P_8021Q), vlan_tag); - if (skb) - skb->vlan_tci = 0; - } - - if (qnq_async_evt_rcvd(adapter) && adapter->pvid) { - if (!vlan_tag) - vlan_tag = adapter->pvid; - if (skip_hw_vlan) - *skip_hw_vlan = true; - } + else if (qnq_async_evt_rcvd(adapter) && adapter->pvid) + vlan_tag = adapter->pvid; if (vlan_tag) { skb = __vlan_put_tag(skb, htons(ETH_P_8021Q), vlan_tag); if (unlikely(!skb)) return skb; - skb->vlan_tci = 0; + if (skip_hw_vlan) + *skip_hw_vlan = true; } /* Insert the outer VLAN, if any */ -- cgit v0.10.2 From 54d27fcb338bd9c42d1dfc5a39e18f6f9d373c2e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 13 May 2013 21:25:52 +0000 Subject: tcp: fix tcp_md5_hash_skb_data() TCP md5 communications fail [1] for some devices, because sg/crypto code assume page offsets are below PAGE_SIZE. This was discovered using mlx4 driver [2], but I suspect loopback might trigger the same bug now we use order-3 pages in tcp_sendmsg() [1] Failure is giving following messages. huh, entered softirq 3 NET_RX ffffffff806ad230 preempt_count 00000100, exited with 00000101? [2] mlx4 driver uses order-2 pages to allocate RX frags Reported-by: Matt Schnall Signed-off-by: Eric Dumazet Cc: Bernhard Beck Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index dcb116d..10c9393 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -3269,8 +3269,11 @@ int tcp_md5_hash_skb_data(struct tcp_md5sig_pool *hp, for (i = 0; i < shi->nr_frags; ++i) { const struct skb_frag_struct *f = &shi->frags[i]; - struct page *page = skb_frag_page(f); - sg_set_page(&sg, page, skb_frag_size(f), f->page_offset); + unsigned int offset = f->page_offset; + struct page *page = skb_frag_page(f) + (offset >> PAGE_SHIFT); + + sg_set_page(&sg, page, skb_frag_size(f), + offset_in_page(offset)); if (crypto_hash_update(desc, &sg, skb_frag_size(f))) return 1; } -- cgit v0.10.2 From a3659aa09a2ee7e0028349b9100d8b4a7750a4be Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Mon, 13 May 2013 23:54:20 +0000 Subject: mv643xx_eth: fix NAPI weight being > 64 3.10-rc1 issues the following warning: netif_napi_add() called with weight 128 on device eth%d This patch reduce the weight to 64, using NAPI_POLL_WEIGHT. Signed-off-by: Andrew Lunn Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c index d0afeea..8f63c36 100644 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c @@ -2745,7 +2745,7 @@ static int mv643xx_eth_probe(struct platform_device *pdev) INIT_WORK(&mp->tx_timeout_task, tx_timeout_task); - netif_napi_add(dev, &mp->napi, mv643xx_eth_poll, 128); + netif_napi_add(dev, &mp->napi, mv643xx_eth_poll, NAPI_POLL_WEIGHT); init_timer(&mp->rx_oom); mp->rx_oom.data = (unsigned long)mp; -- cgit v0.10.2 From 8f174b1175a10903ade40f36eb6c896412877ca0 Mon Sep 17 00:00:00 2001 From: Joonsoo Kim Date: Wed, 1 May 2013 00:07:00 +0900 Subject: workqueue: correct handling of the pool spin_lock When we fail to mutex_trylock(), we release the pool spin_lock and do mutex_lock(). After that, we should regrab the pool spin_lock, but, regrabbing is missed in current code. So correct it. Cc: Lai Jiangshan Signed-off-by: Joonsoo Kim Signed-off-by: Tejun Heo diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 1ae6028..286847b 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -2059,6 +2059,7 @@ static bool manage_workers(struct worker *worker) if (unlikely(!mutex_trylock(&pool->manager_mutex))) { spin_unlock_irq(&pool->lock); mutex_lock(&pool->manager_mutex); + spin_lock_irq(&pool->lock); ret = true; } -- cgit v0.10.2 From ad7b1f841f8a54c6d61ff181451f55b68175e15a Mon Sep 17 00:00:00 2001 From: Marc Dionne Date: Mon, 6 May 2013 17:44:55 -0400 Subject: workqueue: Make schedule_work() available again to non GPL modules Commit 8425e3d5bdbe ("workqueue: inline trivial wrappers") changed schedule_work() and schedule_delayed_work() to inline wrappers, but these rely on some symbols that are EXPORT_SYMBOL_GPL, while the original functions were EXPORT_SYMBOL. This has the effect of changing the licensing requirement for these functions and making them unavailable to non GPL modules. Make them available again by removing the restriction on the required symbols. Signed-off-by: Marc Dionne Signed-off-by: Tejun Heo diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 286847b..02916f4 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -296,7 +296,7 @@ static DEFINE_HASHTABLE(unbound_pool_hash, UNBOUND_POOL_HASH_ORDER); static struct workqueue_attrs *unbound_std_wq_attrs[NR_STD_WORKER_POOLS]; struct workqueue_struct *system_wq __read_mostly; -EXPORT_SYMBOL_GPL(system_wq); +EXPORT_SYMBOL(system_wq); struct workqueue_struct *system_highpri_wq __read_mostly; EXPORT_SYMBOL_GPL(system_highpri_wq); struct workqueue_struct *system_long_wq __read_mostly; @@ -1411,7 +1411,7 @@ bool queue_work_on(int cpu, struct workqueue_struct *wq, local_irq_restore(flags); return ret; } -EXPORT_SYMBOL_GPL(queue_work_on); +EXPORT_SYMBOL(queue_work_on); void delayed_work_timer_fn(unsigned long __data) { @@ -1485,7 +1485,7 @@ bool queue_delayed_work_on(int cpu, struct workqueue_struct *wq, local_irq_restore(flags); return ret; } -EXPORT_SYMBOL_GPL(queue_delayed_work_on); +EXPORT_SYMBOL(queue_delayed_work_on); /** * mod_delayed_work_on - modify delay of or queue a delayed work on specific CPU -- cgit v0.10.2 From b4f711ee03d28f776fd2324fd0bd999cc428e4d2 Mon Sep 17 00:00:00 2001 From: John Stultz Date: Wed, 24 Apr 2013 11:32:56 -0700 Subject: time: Revert ALWAYS_USE_PERSISTENT_CLOCK compile time optimizaitons Kay Sievers noted that the ALWAYS_USE_PERSISTENT_CLOCK config, which enables some minor compile time optimization to avoid uncessary code in mostly the suspend/resume path could cause problems for userland. In particular, the dependency for RTC_HCTOSYS on !ALWAYS_USE_PERSISTENT_CLOCK, which avoids setting the time twice and simplifies suspend/resume, has the side effect of causing the /sys/class/rtc/rtcN/hctosys flag to always be zero, and this flag is commonly used by udev to setup the /dev/rtc symlink to /dev/rtcN, which can cause pain for older applications. While the udev rules could use some work to be less fragile, breaking userland should strongly be avoided. Additionally the compile time optimizations are fairly minor, and the code being optimized is likely to be reworked in the future, so lets revert this change. Reported-by: Kay Sievers Signed-off-by: John Stultz Cc: stable #3.9 Cc: Feng Tang Cc: Jason Gunthorpe Link: http://lkml.kernel.org/r/1366828376-18124-1-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 5db2117..45c4124 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -108,7 +108,6 @@ config X86 select GENERIC_CLOCKEVENTS_BROADCAST if X86_64 || (X86_32 && X86_LOCAL_APIC) select GENERIC_TIME_VSYSCALL if X86_64 select KTIME_SCALAR if X86_32 - select ALWAYS_USE_PERSISTENT_CLOCK select GENERIC_STRNCPY_FROM_USER select GENERIC_STRNLEN_USER select HAVE_CONTEXT_TRACKING if X86_64 diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 0c81915..b983813 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -20,7 +20,6 @@ if RTC_CLASS config RTC_HCTOSYS bool "Set system time from RTC on startup and resume" default y - depends on !ALWAYS_USE_PERSISTENT_CLOCK help If you say yes here, the system time (wall clock) will be set using the value read from a specified RTC device. This is useful to avoid @@ -29,7 +28,6 @@ config RTC_HCTOSYS config RTC_SYSTOHC bool "Set the RTC time based on NTP synchronization" default y - depends on !ALWAYS_USE_PERSISTENT_CLOCK help If you say yes here, the system time (wall clock) will be stored in the RTC specified by RTC_HCTOSYS_DEVICE approximately every 11 diff --git a/include/linux/time.h b/include/linux/time.h index 22d81b3..d5d229b 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -117,14 +117,10 @@ static inline bool timespec_valid_strict(const struct timespec *ts) extern bool persistent_clock_exist; -#ifdef ALWAYS_USE_PERSISTENT_CLOCK -#define has_persistent_clock() true -#else static inline bool has_persistent_clock(void) { return persistent_clock_exist; } -#endif extern void read_persistent_clock(struct timespec *ts); extern void read_boot_clock(struct timespec *ts); diff --git a/kernel/time/Kconfig b/kernel/time/Kconfig index 24510d8..b696922 100644 --- a/kernel/time/Kconfig +++ b/kernel/time/Kconfig @@ -12,11 +12,6 @@ config CLOCKSOURCE_WATCHDOG config ARCH_CLOCKSOURCE_DATA bool -# Platforms has a persistent clock -config ALWAYS_USE_PERSISTENT_CLOCK - bool - default n - # Timekeeping vsyscall support config GENERIC_TIME_VSYSCALL bool -- cgit v0.10.2 From faff57a92ba1d7247c5e86ecea2886d2c9d54507 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 13 May 2013 02:24:11 +0000 Subject: net/802/mrp: fix lockdep splat commit fb745e9a037895 ("net/802/mrp: fix possible race condition when calling mrp_pdu_queue()") introduced a lockdep splat. [ 19.735147] ================================= [ 19.735235] [ INFO: inconsistent lock state ] [ 19.735324] 3.9.2-build-0063 #4 Not tainted [ 19.735412] --------------------------------- [ 19.735500] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 19.735592] rmmod/1840 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 19.735682] (&(&app->lock)->rlock#2){+.?...}, at: [] mrp_uninit_applicant+0x69/0xba [mrp] app->lock is normally taken under softirq context, so disable BH to avoid the splat. Reported-by: Denys Fedoryshchenko Signed-off-by: Eric Dumazet Cc: David Ward Cc: Cong Wang Tested-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/802/mrp.c b/net/802/mrp.c index e085bcc..1eb05d8 100644 --- a/net/802/mrp.c +++ b/net/802/mrp.c @@ -871,10 +871,10 @@ void mrp_uninit_applicant(struct net_device *dev, struct mrp_application *appl) */ del_timer_sync(&app->join_timer); - spin_lock(&app->lock); + spin_lock_bh(&app->lock); mrp_mad_event(app, MRP_EVENT_TX); mrp_pdu_queue(app); - spin_unlock(&app->lock); + spin_unlock_bh(&app->lock); mrp_queue_xmit(app); -- cgit v0.10.2 From 581df9e1944194bfcabc57e1efae79b0fe171d6f Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 14 May 2013 03:00:16 +0000 Subject: net/macb: fix ISR clear-on-write behavior only for some SoC Commit 749a2b6 (net/macb: clear tx/rx completion flags in ISR) introduces clear-on-write on ISR register. This behavior is not always implemented when using Cadence MACB/GEM and is breaking other platforms. We are using the Design Configuration Register 1 information and a capability property to actually activate this clear-on-write behavior on ISR. Reported-by: Hein Tibosch Signed-off-by: Nicolas Ferre Tested-by: Hein Tibosch Acked-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index 6be513d..c89aa41 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -485,7 +485,8 @@ static void macb_tx_interrupt(struct macb *bp) status = macb_readl(bp, TSR); macb_writel(bp, TSR, status); - macb_writel(bp, ISR, MACB_BIT(TCOMP)); + if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE) + macb_writel(bp, ISR, MACB_BIT(TCOMP)); netdev_vdbg(bp->dev, "macb_tx_interrupt status = 0x%03lx\n", (unsigned long)status); @@ -738,7 +739,8 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id) * now. */ macb_writel(bp, IDR, MACB_RX_INT_FLAGS); - macb_writel(bp, ISR, MACB_BIT(RCOMP)); + if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE) + macb_writel(bp, ISR, MACB_BIT(RCOMP)); if (napi_schedule_prep(&bp->napi)) { netdev_vdbg(bp->dev, "scheduling RX softirq\n"); @@ -1062,6 +1064,17 @@ static void macb_configure_dma(struct macb *bp) } } +/* + * Configure peripheral capacities according to integration options used + */ +static void macb_configure_caps(struct macb *bp) +{ + if (macb_is_gem(bp)) { + if (GEM_BF(IRQCOR, gem_readl(bp, DCFG1)) == 0) + bp->caps |= MACB_CAPS_ISR_CLEAR_ON_WRITE; + } +} + static void macb_init_hw(struct macb *bp) { u32 config; @@ -1084,6 +1097,7 @@ static void macb_init_hw(struct macb *bp) bp->duplex = DUPLEX_HALF; macb_configure_dma(bp); + macb_configure_caps(bp); /* Initialize TX and RX buffers */ macb_writel(bp, RBQP, bp->rx_ring_dma); diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h index 993d703..548c0ec 100644 --- a/drivers/net/ethernet/cadence/macb.h +++ b/drivers/net/ethernet/cadence/macb.h @@ -300,6 +300,8 @@ #define MACB_REV_SIZE 16 /* Bitfields in DCFG1. */ +#define GEM_IRQCOR_OFFSET 23 +#define GEM_IRQCOR_SIZE 1 #define GEM_DBWDEF_OFFSET 25 #define GEM_DBWDEF_SIZE 3 @@ -323,6 +325,9 @@ #define MACB_MAN_READ 2 #define MACB_MAN_CODE 2 +/* Capability mask bits */ +#define MACB_CAPS_ISR_CLEAR_ON_WRITE 0x1 + /* Bit manipulation macros */ #define MACB_BIT(name) \ (1 << MACB_##name##_OFFSET) @@ -574,6 +579,8 @@ struct macb { unsigned int speed; unsigned int duplex; + u32 caps; + phy_interface_t phy_interface; /* AT91RM9200 transmit */ -- cgit v0.10.2 From 7d19273cd0408f8520539d5d6b1f695cd311b109 Mon Sep 17 00:00:00 2001 From: Christian Ruppert Date: Fri, 10 May 2013 16:05:50 +0200 Subject: ARC: [TB10x] Remove redundant abilis,simple-pinctrl mechanism The TB10x platform port includes a custom mechanism using to set up default pin controller configurations using abilis,simple-default pin configurations of nodes compatible with abilis,simple-pinctrl. This mechanism is redundant with the Linux standard "default" pin configuration, see commit ab78029ecc347debbd737f06688d788bd9d60c1d "drivers/pinctrl: grab default handles from device core". This patch removes the TB10x custom mechanism in favour of the Linux standard. Signed-off-by: Christian Ruppert Reviewed-by: Stephen Warren Reviewed-by: Linus Walleij Signed-off-by: Vineet Gupta diff --git a/arch/arc/boot/dts/abilis_tb100_dvk.dts b/arch/arc/boot/dts/abilis_tb100_dvk.dts index c0fd362..0fa0d4a 100644 --- a/arch/arc/boot/dts/abilis_tb100_dvk.dts +++ b/arch/arc/boot/dts/abilis_tb100_dvk.dts @@ -37,7 +37,7 @@ soc100 { uart@FF100000 { - pinctrl-names = "abilis,simple-default"; + pinctrl-names = "default"; pinctrl-0 = <&pctl_uart0>; }; ethernet@FE100000 { diff --git a/arch/arc/boot/dts/abilis_tb101_dvk.dts b/arch/arc/boot/dts/abilis_tb101_dvk.dts index 6f8c381..a4d80ce 100644 --- a/arch/arc/boot/dts/abilis_tb101_dvk.dts +++ b/arch/arc/boot/dts/abilis_tb101_dvk.dts @@ -37,7 +37,7 @@ soc100 { uart@FF100000 { - pinctrl-names = "abilis,simple-default"; + pinctrl-names = "default"; pinctrl-0 = <&pctl_uart0>; }; ethernet@FE100000 { diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi b/arch/arc/boot/dts/abilis_tb10x.dtsi index a6139fc..b97e305 100644 --- a/arch/arc/boot/dts/abilis_tb10x.dtsi +++ b/arch/arc/boot/dts/abilis_tb10x.dtsi @@ -88,8 +88,7 @@ }; uart@FF100000 { - compatible = "snps,dw-apb-uart", - "abilis,simple-pinctrl"; + compatible = "snps,dw-apb-uart"; reg = <0xFF100000 0x100>; clock-frequency = <166666666>; interrupts = <25 1>; @@ -184,8 +183,7 @@ #address-cells = <1>; #size-cells = <0>; cell-index = <1>; - compatible = "abilis,tb100-spi", - "abilis,simple-pinctrl"; + compatible = "abilis,tb100-spi"; num-cs = <2>; reg = <0xFE011000 0x20>; interrupt-parent = <&tb10x_ictl>; diff --git a/arch/arc/plat-tb10x/tb10x.c b/arch/arc/plat-tb10x/tb10x.c index d356769..06cb309 100644 --- a/arch/arc/plat-tb10x/tb10x.c +++ b/arch/arc/plat-tb10x/tb10x.c @@ -34,31 +34,6 @@ static void __init tb10x_platform_init(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static void __init tb10x_platform_late_init(void) -{ - struct device_node *dn; - - /* - * Pinctrl documentation recommends setting up the iomux here for - * all modules which don't require control over the pins themselves. - * Modules which need this kind of assistance are compatible with - * "abilis,simple-pinctrl", i.e. we can easily iterate over them. - * TODO: Does this recommended method work cleanly with pins required - * by modules? - */ - for_each_compatible_node(dn, NULL, "abilis,simple-pinctrl") { - struct platform_device *pd = of_find_device_by_node(dn); - struct pinctrl *pctl; - - pctl = pinctrl_get_select(&pd->dev, "abilis,simple-default"); - if (IS_ERR(pctl)) { - int ret = PTR_ERR(pctl); - dev_err(&pd->dev, "Could not set up pinctrl: %d\n", - ret); - } - } -} - static const char *tb10x_compat[] __initdata = { "abilis,arc-tb10x", NULL, @@ -67,5 +42,4 @@ static const char *tb10x_compat[] __initdata = { MACHINE_START(TB10x, "tb10x") .dt_compat = tb10x_compat, .init_machine = tb10x_platform_init, - .init_late = tb10x_platform_late_init, MACHINE_END -- cgit v0.10.2 From 19a280a61b520febab0f2fde94f4bd50250377b2 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sun, 12 May 2013 15:06:51 +0200 Subject: ARM: sunxi: select ARCH_REQUIRE_GPIOLIB MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit CONFIG_ARCH_SUNXI currently doesn't enable a gpiolib, which causes build problems when building a kernel with only the sunxi platform enabled. Select ARCH_REQUIRE_GPIOLIB to solve this. Signed-off-by: Maxime Ripard Tested-by: Emilio López diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index d259c78..5b045e3 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1,5 +1,6 @@ config ARCH_SUNXI bool "Allwinner A1X SOCs" if ARCH_MULTI_V7 + select ARCH_REQUIRE_GPIOLIB select CLKSRC_MMIO select CLKSRC_OF select COMMON_CLK -- cgit v0.10.2 From 867e1162068eb5632c829d453fd65d6089564f55 Mon Sep 17 00:00:00 2001 From: Emil Goode Date: Thu, 9 May 2013 22:39:26 +0200 Subject: bcache: Fix incompatible pointer type warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The function pointer release in struct block_device_operations should point to functions declared as void. Sparse warnings: drivers/md/bcache/super.c:656:27: warning: incorrect type in initializer (different base types) drivers/md/bcache/super.c:656:27: expected void ( *release )( ... ) drivers/md/bcache/super.c:656:27: got int ( static [toplevel] * )( ... ) drivers/md/bcache/super.c:656:2: warning: initialization from incompatible pointer type [enabled by default] drivers/md/bcache/super.c:656:2: warning: (near initialization for ‘bcache_ops.release’) [enabled by default] Signed-off-by: Emil Goode Signed-off-by: Kent Overstreet diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c index c8046bc..b09beb2 100644 --- a/drivers/md/bcache/super.c +++ b/drivers/md/bcache/super.c @@ -634,11 +634,10 @@ static int open_dev(struct block_device *b, fmode_t mode) return 0; } -static int release_dev(struct gendisk *b, fmode_t mode) +static void release_dev(struct gendisk *b, fmode_t mode) { struct bcache_device *d = b->private_data; closure_put(&d->cl); - return 0; } static int ioctl_dev(struct block_device *b, fmode_t mode, -- cgit v0.10.2 From bbb1c3b5ae6c6286a5e018786be88f126d769543 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Mon, 13 May 2013 10:35:21 +0200 Subject: bcache: drop "select CLOSURES" The Kconfig entry for BCACHE selects CLOSURES. But there's no Kconfig symbol CLOSURES. That symbol was used in development versions of bcache, but was removed when the closures code was no longer provided as a kernel library. It can safely be dropped. Signed-off-by: Paul Bolle diff --git a/drivers/md/bcache/Kconfig b/drivers/md/bcache/Kconfig index 05c220d..f950c9d 100644 --- a/drivers/md/bcache/Kconfig +++ b/drivers/md/bcache/Kconfig @@ -1,7 +1,6 @@ config BCACHE tristate "Block device as cache" - select CLOSURES ---help--- Allows a block device to be used as cache for other devices; uses a btree for indexing and the layout is optimized for SSDs. -- cgit v0.10.2 From fe0a797a6b42d9ad0ed063eaef705da1eb3c8147 Mon Sep 17 00:00:00 2001 From: Gabriel Date: Wed, 24 Apr 2013 19:51:02 +0200 Subject: bcache: clarify free/available/unused space Don't describe bcache_available_percent as free space but as non-writeback space. Describe priority_stats in more detail and point to that for total bcache occupation. Signed-off-by: Gabriel de Perthuis Signed-off-by: Kent Overstreet diff --git a/Documentation/bcache.txt b/Documentation/bcache.txt index 77db880..b3a7e7d 100644 --- a/Documentation/bcache.txt +++ b/Documentation/bcache.txt @@ -319,7 +319,10 @@ cache<0..n> Symlink to each of the cache devices comprising this cache set. cache_available_percent - Percentage of cache device free. + Percentage of cache device which doesn't contain dirty data, and could + potentially be used for writeback. This doesn't mean this space isn't used + for clean cached data; the unused statistic (in priority_stats) is typically + much lower. clear_stats Clears the statistics associated with this cache @@ -423,8 +426,11 @@ nbuckets Total buckets in this cache priority_stats - Statistics about how recently data in the cache has been accessed. This can - reveal your working set size. + Statistics about how recently data in the cache has been accessed. + This can reveal your working set size. Unused is the percentage of + the cache that doesn't contain any data. Metadata is bcache's + metadata overhead. Average is the average priority of cache buckets. + Next is a list of quantiles with the priority threshold of each. written Sum of all data that has been written to the cache; comparison with -- cgit v0.10.2 From f59fce847fc8483508b5028c24e2b1e00523dd88 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Wed, 15 May 2013 00:11:26 -0700 Subject: bcache: Fix error handling in init code This code appears to have rotted... fix various bugs and do some refactoring. Signed-off-by: Kent Overstreet diff --git a/drivers/md/bcache/bcache.h b/drivers/md/bcache/bcache.h index 340146d..d3e15b4 100644 --- a/drivers/md/bcache/bcache.h +++ b/drivers/md/bcache/bcache.h @@ -1241,7 +1241,7 @@ void bch_cache_set_stop(struct cache_set *); struct cache_set *bch_cache_set_alloc(struct cache_sb *); void bch_btree_cache_free(struct cache_set *); int bch_btree_cache_alloc(struct cache_set *); -void bch_writeback_init_cached_dev(struct cached_dev *); +void bch_cached_dev_writeback_init(struct cached_dev *); void bch_moving_init_cache_set(struct cache_set *); void bch_cache_allocator_exit(struct cache *ca); diff --git a/drivers/md/bcache/stats.c b/drivers/md/bcache/stats.c index 64e6794..b8730e7 100644 --- a/drivers/md/bcache/stats.c +++ b/drivers/md/bcache/stats.c @@ -93,24 +93,6 @@ static struct attribute *bch_stats_files[] = { }; static KTYPE(bch_stats); -static void scale_accounting(unsigned long data); - -void bch_cache_accounting_init(struct cache_accounting *acc, - struct closure *parent) -{ - kobject_init(&acc->total.kobj, &bch_stats_ktype); - kobject_init(&acc->five_minute.kobj, &bch_stats_ktype); - kobject_init(&acc->hour.kobj, &bch_stats_ktype); - kobject_init(&acc->day.kobj, &bch_stats_ktype); - - closure_init(&acc->cl, parent); - init_timer(&acc->timer); - acc->timer.expires = jiffies + accounting_delay; - acc->timer.data = (unsigned long) acc; - acc->timer.function = scale_accounting; - add_timer(&acc->timer); -} - int bch_cache_accounting_add_kobjs(struct cache_accounting *acc, struct kobject *parent) { @@ -244,3 +226,19 @@ void bch_mark_sectors_bypassed(struct search *s, int sectors) atomic_add(sectors, &dc->accounting.collector.sectors_bypassed); atomic_add(sectors, &s->op.c->accounting.collector.sectors_bypassed); } + +void bch_cache_accounting_init(struct cache_accounting *acc, + struct closure *parent) +{ + kobject_init(&acc->total.kobj, &bch_stats_ktype); + kobject_init(&acc->five_minute.kobj, &bch_stats_ktype); + kobject_init(&acc->hour.kobj, &bch_stats_ktype); + kobject_init(&acc->day.kobj, &bch_stats_ktype); + + closure_init(&acc->cl, parent); + init_timer(&acc->timer); + acc->timer.expires = jiffies + accounting_delay; + acc->timer.data = (unsigned long) acc; + acc->timer.function = scale_accounting; + add_timer(&acc->timer); +} diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c index b09beb2..f88e2b6 100644 --- a/drivers/md/bcache/super.c +++ b/drivers/md/bcache/super.c @@ -731,8 +731,7 @@ static void bcache_device_free(struct bcache_device *d) if (d->c) bcache_device_detach(d); - - if (d->disk) + if (d->disk && d->disk->flags & GENHD_FL_UP) del_gendisk(d->disk); if (d->disk && d->disk->queue) blk_cleanup_queue(d->disk->queue); @@ -755,12 +754,9 @@ static int bcache_device_init(struct bcache_device *d, unsigned block_size) if (!(d->bio_split = bioset_create(4, offsetof(struct bbio, bio))) || !(d->unaligned_bvec = mempool_create_kmalloc_pool(1, sizeof(struct bio_vec) * BIO_MAX_PAGES)) || - bio_split_pool_init(&d->bio_split_hook)) - - return -ENOMEM; - - d->disk = alloc_disk(1); - if (!d->disk) + bio_split_pool_init(&d->bio_split_hook) || + !(d->disk = alloc_disk(1)) || + !(q = blk_alloc_queue(GFP_KERNEL))) return -ENOMEM; snprintf(d->disk->disk_name, DISK_NAME_LEN, "bcache%i", bcache_minor); @@ -770,10 +766,6 @@ static int bcache_device_init(struct bcache_device *d, unsigned block_size) d->disk->fops = &bcache_ops; d->disk->private_data = d; - q = blk_alloc_queue(GFP_KERNEL); - if (!q) - return -ENOMEM; - blk_queue_make_request(q, NULL); d->disk->queue = q; q->queuedata = d; @@ -998,14 +990,17 @@ static void cached_dev_free(struct closure *cl) mutex_lock(&bch_register_lock); - bd_unlink_disk_holder(dc->bdev, dc->disk.disk); + if (atomic_read(&dc->running)) + bd_unlink_disk_holder(dc->bdev, dc->disk.disk); bcache_device_free(&dc->disk); list_del(&dc->list); mutex_unlock(&bch_register_lock); if (!IS_ERR_OR_NULL(dc->bdev)) { - blk_sync_queue(bdev_get_queue(dc->bdev)); + if (dc->bdev->bd_disk) + blk_sync_queue(bdev_get_queue(dc->bdev)); + blkdev_put(dc->bdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL); } @@ -1027,73 +1022,67 @@ static void cached_dev_flush(struct closure *cl) static int cached_dev_init(struct cached_dev *dc, unsigned block_size) { - int err; + int ret; struct io *io; - - closure_init(&dc->disk.cl, NULL); - set_closure_fn(&dc->disk.cl, cached_dev_flush, system_wq); + struct request_queue *q = bdev_get_queue(dc->bdev); __module_get(THIS_MODULE); INIT_LIST_HEAD(&dc->list); + closure_init(&dc->disk.cl, NULL); + set_closure_fn(&dc->disk.cl, cached_dev_flush, system_wq); kobject_init(&dc->disk.kobj, &bch_cached_dev_ktype); - - bch_cache_accounting_init(&dc->accounting, &dc->disk.cl); - - err = bcache_device_init(&dc->disk, block_size); - if (err) - goto err; - - spin_lock_init(&dc->io_lock); - closure_init_unlocked(&dc->sb_write); INIT_WORK(&dc->detach, cached_dev_detach_finish); + closure_init_unlocked(&dc->sb_write); + INIT_LIST_HEAD(&dc->io_lru); + spin_lock_init(&dc->io_lock); + bch_cache_accounting_init(&dc->accounting, &dc->disk.cl); dc->sequential_merge = true; dc->sequential_cutoff = 4 << 20; - INIT_LIST_HEAD(&dc->io_lru); - dc->sb_bio.bi_max_vecs = 1; - dc->sb_bio.bi_io_vec = dc->sb_bio.bi_inline_vecs; - for (io = dc->io; io < dc->io + RECENT_IO; io++) { list_add(&io->lru, &dc->io_lru); hlist_add_head(&io->hash, dc->io_hash + RECENT_IO); } - bch_writeback_init_cached_dev(dc); + ret = bcache_device_init(&dc->disk, block_size); + if (ret) + return ret; + + set_capacity(dc->disk.disk, + dc->bdev->bd_part->nr_sects - dc->sb.data_offset); + + dc->disk.disk->queue->backing_dev_info.ra_pages = + max(dc->disk.disk->queue->backing_dev_info.ra_pages, + q->backing_dev_info.ra_pages); + + bch_cached_dev_request_init(dc); + bch_cached_dev_writeback_init(dc); return 0; -err: - bcache_device_stop(&dc->disk); - return err; } /* Cached device - bcache superblock */ -static const char *register_bdev(struct cache_sb *sb, struct page *sb_page, +static void register_bdev(struct cache_sb *sb, struct page *sb_page, struct block_device *bdev, struct cached_dev *dc) { char name[BDEVNAME_SIZE]; const char *err = "cannot allocate memory"; - struct gendisk *g; struct cache_set *c; - if (!dc || cached_dev_init(dc, sb->block_size << 9) != 0) - return err; - memcpy(&dc->sb, sb, sizeof(struct cache_sb)); - dc->sb_bio.bi_io_vec[0].bv_page = sb_page; dc->bdev = bdev; dc->bdev->bd_holder = dc; - g = dc->disk.disk; - - set_capacity(g, dc->bdev->bd_part->nr_sects - dc->sb.data_offset); - - g->queue->backing_dev_info.ra_pages = - max(g->queue->backing_dev_info.ra_pages, - bdev->bd_queue->backing_dev_info.ra_pages); + bio_init(&dc->sb_bio); + dc->sb_bio.bi_max_vecs = 1; + dc->sb_bio.bi_io_vec = dc->sb_bio.bi_inline_vecs; + dc->sb_bio.bi_io_vec[0].bv_page = sb_page; + get_page(sb_page); - bch_cached_dev_request_init(dc); + if (cached_dev_init(dc, sb->block_size << 9)) + goto err; err = "error creating kobject"; if (kobject_add(&dc->disk.kobj, &part_to_dev(bdev->bd_part)->kobj, @@ -1102,6 +1091,8 @@ static const char *register_bdev(struct cache_sb *sb, struct page *sb_page, if (bch_cache_accounting_add_kobjs(&dc->accounting, &dc->disk.kobj)) goto err; + pr_info("registered backing device %s", bdevname(bdev, name)); + list_add(&dc->list, &uncached_devices); list_for_each_entry(c, &bch_cache_sets, list) bch_cached_dev_attach(dc, c); @@ -1110,15 +1101,10 @@ static const char *register_bdev(struct cache_sb *sb, struct page *sb_page, BDEV_STATE(&dc->sb) == BDEV_STATE_STALE) bch_cached_dev_run(dc); - return NULL; + return; err: - kobject_put(&dc->disk.kobj); pr_notice("error opening %s: %s", bdevname(bdev, name), err); - /* - * Return NULL instead of an error because kobject_put() cleans - * everything up - */ - return NULL; + bcache_device_stop(&dc->disk); } /* Flash only volumes */ @@ -1716,20 +1702,11 @@ static int cache_alloc(struct cache_sb *sb, struct cache *ca) size_t free; struct bucket *b; - if (!ca) - return -ENOMEM; - __module_get(THIS_MODULE); kobject_init(&ca->kobj, &bch_cache_ktype); - memcpy(&ca->sb, sb, sizeof(struct cache_sb)); - INIT_LIST_HEAD(&ca->discards); - bio_init(&ca->sb_bio); - ca->sb_bio.bi_max_vecs = 1; - ca->sb_bio.bi_io_vec = ca->sb_bio.bi_inline_vecs; - bio_init(&ca->journal.bio); ca->journal.bio.bi_max_vecs = 8; ca->journal.bio.bi_io_vec = ca->journal.bio.bi_inline_vecs; @@ -1741,18 +1718,17 @@ static int cache_alloc(struct cache_sb *sb, struct cache *ca) !init_fifo(&ca->free_inc, free << 2, GFP_KERNEL) || !init_fifo(&ca->unused, free << 2, GFP_KERNEL) || !init_heap(&ca->heap, free << 3, GFP_KERNEL) || - !(ca->buckets = vmalloc(sizeof(struct bucket) * + !(ca->buckets = vzalloc(sizeof(struct bucket) * ca->sb.nbuckets)) || !(ca->prio_buckets = kzalloc(sizeof(uint64_t) * prio_buckets(ca) * 2, GFP_KERNEL)) || !(ca->disk_buckets = alloc_bucket_pages(GFP_KERNEL, ca)) || !(ca->alloc_workqueue = alloc_workqueue("bch_allocator", 0, 1)) || bio_split_pool_init(&ca->bio_split_hook)) - goto err; + return -ENOMEM; ca->prio_last_buckets = ca->prio_buckets + prio_buckets(ca); - memset(ca->buckets, 0, ca->sb.nbuckets * sizeof(struct bucket)); for_each_bucket(b, ca) atomic_set(&b->pin, 0); @@ -1765,22 +1741,28 @@ err: return -ENOMEM; } -static const char *register_cache(struct cache_sb *sb, struct page *sb_page, +static void register_cache(struct cache_sb *sb, struct page *sb_page, struct block_device *bdev, struct cache *ca) { char name[BDEVNAME_SIZE]; const char *err = "cannot allocate memory"; - if (cache_alloc(sb, ca) != 0) - return err; - - ca->sb_bio.bi_io_vec[0].bv_page = sb_page; + memcpy(&ca->sb, sb, sizeof(struct cache_sb)); ca->bdev = bdev; ca->bdev->bd_holder = ca; + bio_init(&ca->sb_bio); + ca->sb_bio.bi_max_vecs = 1; + ca->sb_bio.bi_io_vec = ca->sb_bio.bi_inline_vecs; + ca->sb_bio.bi_io_vec[0].bv_page = sb_page; + get_page(sb_page); + if (blk_queue_discard(bdev_get_queue(ca->bdev))) ca->discard = CACHE_DISCARD(&ca->sb); + if (cache_alloc(sb, ca) != 0) + goto err; + err = "error creating kobject"; if (kobject_add(&ca->kobj, &part_to_dev(bdev->bd_part)->kobj, "bcache")) goto err; @@ -1790,15 +1772,10 @@ static const char *register_cache(struct cache_sb *sb, struct page *sb_page, goto err; pr_info("registered cache device %s", bdevname(bdev, name)); - - return NULL; + return; err: + pr_notice("error opening %s: %s", bdevname(bdev, name), err); kobject_put(&ca->kobj); - pr_info("error opening %s: %s", bdevname(bdev, name), err); - /* Return NULL instead of an error because kobject_put() cleans - * everything up - */ - return NULL; } /* Global interfaces/init */ @@ -1832,12 +1809,15 @@ static ssize_t register_bcache(struct kobject *k, struct kobj_attribute *attr, bdev = blkdev_get_by_path(strim(path), FMODE_READ|FMODE_WRITE|FMODE_EXCL, sb); - if (bdev == ERR_PTR(-EBUSY)) - err = "device busy"; - - if (IS_ERR(bdev) || - set_blocksize(bdev, 4096)) + if (IS_ERR(bdev)) { + if (bdev == ERR_PTR(-EBUSY)) + err = "device busy"; goto err; + } + + err = "failed to set blocksize"; + if (set_blocksize(bdev, 4096)) + goto err_close; err = read_super(sb, bdev, &sb_page); if (err) @@ -1845,33 +1825,33 @@ static ssize_t register_bcache(struct kobject *k, struct kobj_attribute *attr, if (SB_IS_BDEV(sb)) { struct cached_dev *dc = kzalloc(sizeof(*dc), GFP_KERNEL); + if (!dc) + goto err_close; - err = register_bdev(sb, sb_page, bdev, dc); + register_bdev(sb, sb_page, bdev, dc); } else { struct cache *ca = kzalloc(sizeof(*ca), GFP_KERNEL); + if (!ca) + goto err_close; - err = register_cache(sb, sb_page, bdev, ca); + register_cache(sb, sb_page, bdev, ca); } - - if (err) { - /* register_(bdev|cache) will only return an error if they - * didn't get far enough to create the kobject - if they did, - * the kobject destructor will do this cleanup. - */ +out: + if (sb_page) put_page(sb_page); -err_close: - blkdev_put(bdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL); -err: - if (attr != &ksysfs_register_quiet) - pr_info("error opening %s: %s", path, err); - ret = -EINVAL; - } - kfree(sb); kfree(path); mutex_unlock(&bch_register_lock); module_put(THIS_MODULE); return ret; + +err_close: + blkdev_put(bdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL); +err: + if (attr != &ksysfs_register_quiet) + pr_info("error opening %s: %s", path, err); + ret = -EINVAL; + goto out; } static int bcache_reboot(struct notifier_block *n, unsigned long code, void *x) diff --git a/drivers/md/bcache/writeback.c b/drivers/md/bcache/writeback.c index 93e7e31..2714ed3 100644 --- a/drivers/md/bcache/writeback.c +++ b/drivers/md/bcache/writeback.c @@ -375,7 +375,7 @@ err: refill_dirty(cl); } -void bch_writeback_init_cached_dev(struct cached_dev *dc) +void bch_cached_dev_writeback_init(struct cached_dev *dc) { closure_init_unlocked(&dc->writeback); init_rwsem(&dc->writeback_lock); -- cgit v0.10.2 From 974a51a245c2c8bece21cf2d3cbfc8261260f729 Mon Sep 17 00:00:00 2001 From: Sam Bradshaw Date: Wed, 15 May 2013 10:04:34 +0200 Subject: mtip32xx: Fix NULL pointer dereference during module unload An open file-handle to one or more of the driver exported debugfs nodes causes raciness in recursive removal during module unload; sometimes a stale parent dentry is dereferenced when more than 1 pci device is present. Signed-off-by: Sam Bradshaw Signed-off-by: Jens Axboe diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index 847107e..e366c74 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -3002,7 +3002,8 @@ static int mtip_hw_debugfs_init(struct driver_data *dd) static void mtip_hw_debugfs_exit(struct driver_data *dd) { - debugfs_remove_recursive(dd->dfs_node); + if (dd->dfs_node) + debugfs_remove_recursive(dd->dfs_node); } -- cgit v0.10.2 From 093c959307f2f5af72b24fdc4af7d4d0263f6eea Mon Sep 17 00:00:00 2001 From: Sam Bradshaw Date: Wed, 15 May 2013 10:09:05 +0200 Subject: mtip32xx: Correctly handle bio->bi_idx != 0 conditions Stacking drivers may append bvecs to existing bio's, resulting in non-zero bi_idx conditions. This patch counts the loops of bio_for_each_segment() rather than inheriting the bi_idx value to pass as a segment count to the hardware submission routine. Signed-off-by: Sam Bradshaw Signed-off-by: Jens Axboe diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index e366c74..20dd52a 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -3864,7 +3864,7 @@ static void mtip_make_request(struct request_queue *queue, struct bio *bio) struct driver_data *dd = queue->queuedata; struct scatterlist *sg; struct bio_vec *bvec; - int nents = 0; + int i, nents = 0; int tag = 0, unaligned = 0; if (unlikely(dd->dd_flag & MTIP_DDF_STOP_IO)) { @@ -3922,11 +3922,12 @@ static void mtip_make_request(struct request_queue *queue, struct bio *bio) } /* Create the scatter list for this bio. */ - bio_for_each_segment(bvec, bio, nents) { + bio_for_each_segment(bvec, bio, i) { sg_set_page(&sg[nents], bvec->bv_page, bvec->bv_len, bvec->bv_offset); + nents++; } /* Issue the read/write. */ -- cgit v0.10.2 From d2bdbee0d91a5d3ba2e439ce889e20bfe6fd4f1b Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Tue, 14 May 2013 23:41:04 -0700 Subject: target/iblock: Fix WCE=1 + DPOFUA=1 backend WRITE regression This patch fixes a regression bug introduced in v3.9-rc1 where if the underlying struct block_device for a IBLOCK backend is configured with WCE=1 + DPOFUA=1 settings, the rw = WRITE assignment no longer occurs in iblock_execute_rw(), and rw = 0 is passed to iblock_submit_bios() in effect causing a READ bio operation to occur. The offending commit is: commit d0c8b259f8970d39354c1966853363345d401330 Author: Nicholas Bellinger Date: Tue Jan 29 22:10:06 2013 -0800 target/iblock: Use backend REQ_FLUSH hint for WriteCacheEnabled status Note the WCE=1 + DPOFUA=0, WCE=0 + DPOFUA=1, and WCE=0 + DPOFUA=0 cases are not affected by this regression bug. Reported-by: Chris Boot Tested-by: Chris Boot Reported-by: Hannes Reinecke Cc: Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c index 07f5f94..aa1620a 100644 --- a/drivers/target/target_core_iblock.c +++ b/drivers/target/target_core_iblock.c @@ -615,6 +615,8 @@ iblock_execute_rw(struct se_cmd *cmd) rw = WRITE_FUA; else if (!(q->flush_flags & REQ_FLUSH)) rw = WRITE_FUA; + else + rw = WRITE; } else { rw = WRITE; } -- cgit v0.10.2 From a1321ddd27e65c6ada5b9a12cae4ee2612d76893 Mon Sep 17 00:00:00 2001 From: Joern Engel Date: Mon, 13 May 2013 16:30:05 -0400 Subject: target: removed unused transport_state flag Signed-off-by: Joern Engel Signed-off-by: Nicholas Bellinger diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 136b7b2..e773dfa 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -463,7 +463,6 @@ struct se_cmd { #define CMD_T_ABORTED (1 << 0) #define CMD_T_ACTIVE (1 << 1) #define CMD_T_COMPLETE (1 << 2) -#define CMD_T_QUEUED (1 << 3) #define CMD_T_SENT (1 << 4) #define CMD_T_STOP (1 << 5) #define CMD_T_FAILED (1 << 6) -- cgit v0.10.2 From ccf5ae83a6cf3d9cfe9a7038bfe7cd38ab03d5e1 Mon Sep 17 00:00:00 2001 From: Joern Engel Date: Mon, 13 May 2013 16:30:06 -0400 Subject: target: close target_put_sess_cmd() vs. core_tmr_abort_task() race It is possible for one thread to to take se_sess->sess_cmd_lock in core_tmr_abort_task() before taking a reference count on se_cmd->cmd_kref, while another thread in target_put_sess_cmd() drops se_cmd->cmd_kref before taking se_sess->sess_cmd_lock. This introduces kref_put_spinlock_irqsave() and uses it in target_put_sess_cmd() to close the race window. Signed-off-by: Joern Engel Acked-by: Greg Kroah-Hartman Cc: Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index c3477fa..4a79336 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2211,21 +2211,19 @@ static void target_release_cmd_kref(struct kref *kref) { struct se_cmd *se_cmd = container_of(kref, struct se_cmd, cmd_kref); struct se_session *se_sess = se_cmd->se_sess; - unsigned long flags; - spin_lock_irqsave(&se_sess->sess_cmd_lock, flags); if (list_empty(&se_cmd->se_cmd_list)) { - spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); + spin_unlock(&se_sess->sess_cmd_lock); se_cmd->se_tfo->release_cmd(se_cmd); return; } if (se_sess->sess_tearing_down && se_cmd->cmd_wait_set) { - spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); + spin_unlock(&se_sess->sess_cmd_lock); complete(&se_cmd->cmd_wait_comp); return; } list_del(&se_cmd->se_cmd_list); - spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); + spin_unlock(&se_sess->sess_cmd_lock); se_cmd->se_tfo->release_cmd(se_cmd); } @@ -2236,7 +2234,8 @@ static void target_release_cmd_kref(struct kref *kref) */ int target_put_sess_cmd(struct se_session *se_sess, struct se_cmd *se_cmd) { - return kref_put(&se_cmd->cmd_kref, target_release_cmd_kref); + return kref_put_spinlock_irqsave(&se_cmd->cmd_kref, target_release_cmd_kref, + &se_sess->sess_cmd_lock); } EXPORT_SYMBOL(target_put_sess_cmd); diff --git a/include/linux/kref.h b/include/linux/kref.h index 4972e6e..7419c02 100644 --- a/include/linux/kref.h +++ b/include/linux/kref.h @@ -19,6 +19,7 @@ #include #include #include +#include struct kref { atomic_t refcount; @@ -95,6 +96,38 @@ static inline int kref_put(struct kref *kref, void (*release)(struct kref *kref) return kref_sub(kref, 1, release); } +/** + * kref_put_spinlock_irqsave - decrement refcount for object. + * @kref: object. + * @release: pointer to the function that will clean up the object when the + * last reference to the object is released. + * This pointer is required, and it is not acceptable to pass kfree + * in as this function. + * @lock: lock to take in release case + * + * Behaves identical to kref_put with one exception. If the reference count + * drops to zero, the lock will be taken atomically wrt dropping the reference + * count. The release function has to call spin_unlock() without _irqrestore. + */ +static inline int kref_put_spinlock_irqsave(struct kref *kref, + void (*release)(struct kref *kref), + spinlock_t *lock) +{ + unsigned long flags; + + WARN_ON(release == NULL); + if (atomic_add_unless(&kref->refcount, -1, 1)) + return 0; + spin_lock_irqsave(lock, flags); + if (atomic_dec_and_test(&kref->refcount)) { + release(kref); + local_irq_restore(flags); + return 1; + } + spin_unlock_irqrestore(lock, flags); + return 0; +} + static inline int kref_put_mutex(struct kref *kref, void (*release)(struct kref *kref), struct mutex *lock) -- cgit v0.10.2 From b7a8ca5173ef9aa55fa039d7c216426ff0b25a12 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Wed, 15 May 2013 12:12:33 +0200 Subject: ARM: at91: rm9200 fix time support since commit 838a2ae80a6ab52139fb1bf0a93ea8c5eff94488 Author: Shawn Guo Date: Sat Jan 12 11:50:05 2013 +0000 ARM: use clockevents_config_and_register() where possible The timer is wrongly configured and result in a nice crash so revert it on rm9200 timer. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: stable # 3.8+ Cc: Shawn Guo Signed-off-by: Nicolas Ferre diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index 2acdff4..180b302 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -174,6 +174,7 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev) static struct clock_event_device clkevt = { .name = "at91_tick", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, .rating = 150, .set_next_event = clkevt32k_next_event, .set_mode = clkevt32k_mode, @@ -264,9 +265,11 @@ void __init at91rm9200_timer_init(void) at91_st_write(AT91_ST_RTMR, 1); /* Setup timer clockevent, with minimum of two ticks (important!!) */ + clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift); + clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt); + clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1; clkevt.cpumask = cpumask_of(0); - clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK, - 2, AT91_ST_ALMV); + clockevents_register_device(&clkevt); /* register clocksource */ clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK); -- cgit v0.10.2 From bb4b42ce0ca36af8c113587ab64b138b3cf5459c Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Wed, 8 May 2013 15:25:38 +0200 Subject: s390: fix gmap_ipte_notifier vs. software dirty pages On heavy paging load some guest cpus started to loop in gmap_ipte_notify. This was visible as stalled cpus inside the guest. The gmap_ipte_notifier tries to map a user page and then made sure that the pte is valid and writable. Turns out that with the software change bit tracking the pte can become read-only (and only software writable) if the page is clean. Since we loop in this code, the page would stay clean and, therefore, be never writable again. Let us just use fixup_user_fault, that guarantees to call handle_mm_fault. Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index 7805ddc..18dc417 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -677,8 +677,7 @@ int gmap_ipte_notify(struct gmap *gmap, unsigned long start, unsigned long len) break; } /* Get the page mapped */ - if (get_user_pages(current, gmap->mm, addr, 1, 1, 0, - NULL, NULL) != 1) { + if (fixup_user_fault(current, gmap->mm, addr, FAULT_FLAG_WRITE)) { rc = -EFAULT; break; } -- cgit v0.10.2 From aca91209775514b5a335e7ef11f1d636618590c7 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 13 May 2013 14:48:52 +0200 Subject: s390/ftrace: fix mcount adjustment Tony Jones reported that the ftrace self tests on s390 do not work: <6>Testing dynamic ftrace ops #1: (0 0 0 0 0) FAILED! <6>Testing tracer irqsoff: <3>failed to start irqsoff tracer <4>.. no entries found ..FAILED! <6>Testing tracer wakeup: <3>failed to start wakeup tracer <4>.. no entries found ..FAILED! <6>Testing tracer function_graph: <4>Failed to init function_graph tracer, init returned -19 <4>FAILED! This happens because we forgot to adjust the instruction pointer that gets passed to the ftrace trace function by MCOUNT_INSN_SIZE. In addition change MCOUNT_INSN_SIZE to the correct value on 31 bit. It only worked so far because the to be patched instruction was identical. Reported-by: Tony Jones Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/asm/ftrace.h b/arch/s390/include/asm/ftrace.h index b7931fa..bf246da 100644 --- a/arch/s390/include/asm/ftrace.h +++ b/arch/s390/include/asm/ftrace.h @@ -9,11 +9,6 @@ struct dyn_arch_ftrace { }; #define MCOUNT_ADDR ((long)_mcount) -#ifdef CONFIG_64BIT -#define MCOUNT_INSN_SIZE 12 -#else -#define MCOUNT_INSN_SIZE 20 -#endif static inline unsigned long ftrace_call_adjust(unsigned long addr) { @@ -21,4 +16,11 @@ static inline unsigned long ftrace_call_adjust(unsigned long addr) } #endif /* __ASSEMBLY__ */ + +#ifdef CONFIG_64BIT +#define MCOUNT_INSN_SIZE 12 +#else +#define MCOUNT_INSN_SIZE 22 +#endif + #endif /* _ASM_S390_FTRACE_H */ diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c index 78bdf0e..e3043ae 100644 --- a/arch/s390/kernel/ftrace.c +++ b/arch/s390/kernel/ftrace.c @@ -16,12 +16,6 @@ #include #include -#ifdef CONFIG_64BIT -#define MCOUNT_OFFSET_RET 12 -#else -#define MCOUNT_OFFSET_RET 22 -#endif - #ifdef CONFIG_DYNAMIC_FTRACE void ftrace_disable_code(void); @@ -155,9 +149,10 @@ unsigned long __kprobes prepare_ftrace_return(unsigned long parent, if (unlikely(atomic_read(¤t->tracing_graph_pause))) goto out; + ip = (ip & PSW_ADDR_INSN) - MCOUNT_INSN_SIZE; if (ftrace_push_return_trace(parent, ip, &trace.depth, 0) == -EBUSY) goto out; - trace.func = (ip & PSW_ADDR_INSN) - MCOUNT_OFFSET_RET; + trace.func = ip; /* Only trace if the calling function expects to. */ if (!ftrace_graph_entry(&trace)) { current->curr_ret_stack--; diff --git a/arch/s390/kernel/mcount.S b/arch/s390/kernel/mcount.S index 4567ce2..08dcf21 100644 --- a/arch/s390/kernel/mcount.S +++ b/arch/s390/kernel/mcount.S @@ -7,6 +7,7 @@ #include #include +#include .section .kprobes.text, "ax" @@ -33,6 +34,7 @@ ENTRY(ftrace_caller) la %r2,0(%r14) st %r0,__SF_BACKCHAIN(%r15) la %r3,0(%r3) + ahi %r2,-MCOUNT_INSN_SIZE l %r14,0b-0b(%r1) l %r14,0(%r14) basr %r14,%r14 diff --git a/arch/s390/kernel/mcount64.S b/arch/s390/kernel/mcount64.S index 1133219..1c52eae 100644 --- a/arch/s390/kernel/mcount64.S +++ b/arch/s390/kernel/mcount64.S @@ -7,6 +7,7 @@ #include #include +#include .section .kprobes.text, "ax" @@ -29,6 +30,7 @@ ENTRY(ftrace_caller) stg %r1,__SF_BACKCHAIN(%r15) lgr %r2,%r14 lg %r3,168(%r15) + aghi %r2,-MCOUNT_INSN_SIZE larl %r14,ftrace_trace_function lg %r14,0(%r14) basr %r14,%r14 -- cgit v0.10.2 From 1dda2fa650da12a644c7cc8645707c912bdc5ab8 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 14 May 2013 17:00:38 +0200 Subject: pinctrl/lantiq: Free mapping configs for both pin and groups When creating mappings from DT both pin config and group config mappings are allocated. Free them both when destroying the mappings. Signed-off-by: Laurent Pinchart Acked-by: John Crispin Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-lantiq.c b/drivers/pinctrl/pinctrl-lantiq.c index 615c500..d22ca25 100644 --- a/drivers/pinctrl/pinctrl-lantiq.c +++ b/drivers/pinctrl/pinctrl-lantiq.c @@ -52,7 +52,8 @@ static void ltq_pinctrl_dt_free_map(struct pinctrl_dev *pctldev, int i; for (i = 0; i < num_maps; i++) - if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN) + if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN || + map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP) kfree(map[i].data.configs.configs); kfree(map); } -- cgit v0.10.2 From 8cdb46da06ea94543a3b2e53e3e92736421d1093 Mon Sep 17 00:00:00 2001 From: Hans Schillstrom Date: Wed, 15 May 2013 01:23:45 +0000 Subject: netfilter: log: netns NULL ptr bug when calling from conntrack Since (69b34fb netfilter: xt_LOG: add net namespace support for xt_LOG), we hit this: [ 4224.708977] BUG: unable to handle kernel NULL pointer dereference at 0000000000000388 [ 4224.709074] IP: [] ipt_log_packet+0x29/0x270 when callling log functions from conntrack both in and out are NULL i.e. the net pointer is invalid. Adding struct net *net in call to nf_logfn() will secure that there always is a vaild net ptr. Reported as netfilter's bugzilla bug 818: https://bugzilla.netfilter.org/show_bug.cgi?id=818 Reported-by: Ronald Signed-off-by: Hans Schillstrom Signed-off-by: Pablo Neira Ayuso diff --git a/include/net/netfilter/nf_log.h b/include/net/netfilter/nf_log.h index 31f1fb9..99eac12 100644 --- a/include/net/netfilter/nf_log.h +++ b/include/net/netfilter/nf_log.h @@ -30,7 +30,8 @@ struct nf_loginfo { } u; }; -typedef void nf_logfn(u_int8_t pf, +typedef void nf_logfn(struct net *net, + u_int8_t pf, unsigned int hooknum, const struct sk_buff *skb, const struct net_device *in, diff --git a/include/net/netfilter/nfnetlink_log.h b/include/net/netfilter/nfnetlink_log.h index e2dec42..5ca3f14 100644 --- a/include/net/netfilter/nfnetlink_log.h +++ b/include/net/netfilter/nfnetlink_log.h @@ -2,7 +2,8 @@ #define _KER_NFNETLINK_LOG_H void -nfulnl_log_packet(u_int8_t pf, +nfulnl_log_packet(struct net *net, + u_int8_t pf, unsigned int hooknum, const struct sk_buff *skb, const struct net_device *in, diff --git a/net/bridge/netfilter/ebt_log.c b/net/bridge/netfilter/ebt_log.c index 9878eb8..19c37a4 100644 --- a/net/bridge/netfilter/ebt_log.c +++ b/net/bridge/netfilter/ebt_log.c @@ -72,13 +72,12 @@ print_ports(const struct sk_buff *skb, uint8_t protocol, int offset) } static void -ebt_log_packet(u_int8_t pf, unsigned int hooknum, - const struct sk_buff *skb, const struct net_device *in, - const struct net_device *out, const struct nf_loginfo *loginfo, - const char *prefix) +ebt_log_packet(struct net *net, u_int8_t pf, unsigned int hooknum, + const struct sk_buff *skb, const struct net_device *in, + const struct net_device *out, const struct nf_loginfo *loginfo, + const char *prefix) { unsigned int bitmask; - struct net *net = dev_net(in ? in : out); /* FIXME: Disabled from containers until syslog ns is supported */ if (!net_eq(net, &init_net)) @@ -191,7 +190,7 @@ ebt_log_tg(struct sk_buff *skb, const struct xt_action_param *par) nf_log_packet(net, NFPROTO_BRIDGE, par->hooknum, skb, par->in, par->out, &li, "%s", info->prefix); else - ebt_log_packet(NFPROTO_BRIDGE, par->hooknum, skb, par->in, + ebt_log_packet(net, NFPROTO_BRIDGE, par->hooknum, skb, par->in, par->out, &li, info->prefix); return EBT_CONTINUE; } diff --git a/net/bridge/netfilter/ebt_ulog.c b/net/bridge/netfilter/ebt_ulog.c index fc1905c..df0364a 100644 --- a/net/bridge/netfilter/ebt_ulog.c +++ b/net/bridge/netfilter/ebt_ulog.c @@ -131,14 +131,16 @@ static struct sk_buff *ulog_alloc_skb(unsigned int size) return skb; } -static void ebt_ulog_packet(unsigned int hooknr, const struct sk_buff *skb, - const struct net_device *in, const struct net_device *out, - const struct ebt_ulog_info *uloginfo, const char *prefix) +static void ebt_ulog_packet(struct net *net, unsigned int hooknr, + const struct sk_buff *skb, + const struct net_device *in, + const struct net_device *out, + const struct ebt_ulog_info *uloginfo, + const char *prefix) { ebt_ulog_packet_msg_t *pm; size_t size, copy_len; struct nlmsghdr *nlh; - struct net *net = dev_net(in ? in : out); struct ebt_ulog_net *ebt = ebt_ulog_pernet(net); unsigned int group = uloginfo->nlgroup; ebt_ulog_buff_t *ub = &ebt->ulog_buffers[group]; @@ -233,7 +235,7 @@ unlock: } /* this function is registered with the netfilter core */ -static void ebt_log_packet(u_int8_t pf, unsigned int hooknum, +static void ebt_log_packet(struct net *net, u_int8_t pf, unsigned int hooknum, const struct sk_buff *skb, const struct net_device *in, const struct net_device *out, const struct nf_loginfo *li, const char *prefix) @@ -252,13 +254,15 @@ static void ebt_log_packet(u_int8_t pf, unsigned int hooknum, strlcpy(loginfo.prefix, prefix, sizeof(loginfo.prefix)); } - ebt_ulog_packet(hooknum, skb, in, out, &loginfo, prefix); + ebt_ulog_packet(net, hooknum, skb, in, out, &loginfo, prefix); } static unsigned int ebt_ulog_tg(struct sk_buff *skb, const struct xt_action_param *par) { - ebt_ulog_packet(par->hooknum, skb, par->in, par->out, + struct net *net = dev_net(par->in ? par->in : par->out); + + ebt_ulog_packet(net, par->hooknum, skb, par->in, par->out, par->targinfo, NULL); return EBT_CONTINUE; } diff --git a/net/ipv4/netfilter/ipt_ULOG.c b/net/ipv4/netfilter/ipt_ULOG.c index f8a222cb..cf08218 100644 --- a/net/ipv4/netfilter/ipt_ULOG.c +++ b/net/ipv4/netfilter/ipt_ULOG.c @@ -162,7 +162,8 @@ static struct sk_buff *ulog_alloc_skb(unsigned int size) return skb; } -static void ipt_ulog_packet(unsigned int hooknum, +static void ipt_ulog_packet(struct net *net, + unsigned int hooknum, const struct sk_buff *skb, const struct net_device *in, const struct net_device *out, @@ -174,7 +175,6 @@ static void ipt_ulog_packet(unsigned int hooknum, size_t size, copy_len; struct nlmsghdr *nlh; struct timeval tv; - struct net *net = dev_net(in ? in : out); struct ulog_net *ulog = ulog_pernet(net); /* ffs == find first bit set, necessary because userspace @@ -291,12 +291,15 @@ alloc_failure: static unsigned int ulog_tg(struct sk_buff *skb, const struct xt_action_param *par) { - ipt_ulog_packet(par->hooknum, skb, par->in, par->out, + struct net *net = dev_net(par->in ? par->in : par->out); + + ipt_ulog_packet(net, par->hooknum, skb, par->in, par->out, par->targinfo, NULL); return XT_CONTINUE; } -static void ipt_logfn(u_int8_t pf, +static void ipt_logfn(struct net *net, + u_int8_t pf, unsigned int hooknum, const struct sk_buff *skb, const struct net_device *in, @@ -318,7 +321,7 @@ static void ipt_logfn(u_int8_t pf, strlcpy(loginfo.prefix, prefix, sizeof(loginfo.prefix)); } - ipt_ulog_packet(hooknum, skb, in, out, &loginfo, prefix); + ipt_ulog_packet(net, hooknum, skb, in, out, &loginfo, prefix); } static int ulog_tg_check(const struct xt_tgchk_param *par) diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c index 757951d..3b18dd1 100644 --- a/net/netfilter/nf_log.c +++ b/net/netfilter/nf_log.c @@ -148,7 +148,7 @@ void nf_log_packet(struct net *net, va_start(args, fmt); vsnprintf(prefix, sizeof(prefix), fmt, args); va_end(args); - logger->logfn(pf, hooknum, skb, in, out, loginfo, prefix); + logger->logfn(net, pf, hooknum, skb, in, out, loginfo, prefix); } rcu_read_unlock(); } diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c index d83d881..962e979 100644 --- a/net/netfilter/nfnetlink_log.c +++ b/net/netfilter/nfnetlink_log.c @@ -602,7 +602,8 @@ static struct nf_loginfo default_loginfo = { /* log handler for internal netfilter logging api */ void -nfulnl_log_packet(u_int8_t pf, +nfulnl_log_packet(struct net *net, + u_int8_t pf, unsigned int hooknum, const struct sk_buff *skb, const struct net_device *in, @@ -615,7 +616,6 @@ nfulnl_log_packet(u_int8_t pf, const struct nf_loginfo *li; unsigned int qthreshold; unsigned int plen; - struct net *net = dev_net(in ? in : out); struct nfnl_log_net *log = nfnl_log_pernet(net); if (li_user && li_user->type == NF_LOG_TYPE_ULOG) diff --git a/net/netfilter/xt_LOG.c b/net/netfilter/xt_LOG.c index fe573f6..491c7d8 100644 --- a/net/netfilter/xt_LOG.c +++ b/net/netfilter/xt_LOG.c @@ -466,7 +466,8 @@ log_packet_common(struct sbuff *m, static void -ipt_log_packet(u_int8_t pf, +ipt_log_packet(struct net *net, + u_int8_t pf, unsigned int hooknum, const struct sk_buff *skb, const struct net_device *in, @@ -475,7 +476,6 @@ ipt_log_packet(u_int8_t pf, const char *prefix) { struct sbuff *m; - struct net *net = dev_net(in ? in : out); /* FIXME: Disabled from containers until syslog ns is supported */ if (!net_eq(net, &init_net)) @@ -797,7 +797,8 @@ fallback: } static void -ip6t_log_packet(u_int8_t pf, +ip6t_log_packet(struct net *net, + u_int8_t pf, unsigned int hooknum, const struct sk_buff *skb, const struct net_device *in, @@ -806,7 +807,6 @@ ip6t_log_packet(u_int8_t pf, const char *prefix) { struct sbuff *m; - struct net *net = dev_net(in ? in : out); /* FIXME: Disabled from containers until syslog ns is supported */ if (!net_eq(net, &init_net)) @@ -833,17 +833,18 @@ log_tg(struct sk_buff *skb, const struct xt_action_param *par) { const struct xt_log_info *loginfo = par->targinfo; struct nf_loginfo li; + struct net *net = dev_net(par->in ? par->in : par->out); li.type = NF_LOG_TYPE_LOG; li.u.log.level = loginfo->level; li.u.log.logflags = loginfo->logflags; if (par->family == NFPROTO_IPV4) - ipt_log_packet(NFPROTO_IPV4, par->hooknum, skb, par->in, + ipt_log_packet(net, NFPROTO_IPV4, par->hooknum, skb, par->in, par->out, &li, loginfo->prefix); #if IS_ENABLED(CONFIG_IP6_NF_IPTABLES) else if (par->family == NFPROTO_IPV6) - ip6t_log_packet(NFPROTO_IPV6, par->hooknum, skb, par->in, + ip6t_log_packet(net, NFPROTO_IPV6, par->hooknum, skb, par->in, par->out, &li, loginfo->prefix); #endif else diff --git a/net/netfilter/xt_NFLOG.c b/net/netfilter/xt_NFLOG.c index a17dd0f..fb7497c 100644 --- a/net/netfilter/xt_NFLOG.c +++ b/net/netfilter/xt_NFLOG.c @@ -26,13 +26,14 @@ nflog_tg(struct sk_buff *skb, const struct xt_action_param *par) { const struct xt_nflog_info *info = par->targinfo; struct nf_loginfo li; + struct net *net = dev_net(par->in ? par->in : par->out); li.type = NF_LOG_TYPE_ULOG; li.u.ulog.copy_len = info->len; li.u.ulog.group = info->group; li.u.ulog.qthreshold = info->threshold; - nfulnl_log_packet(par->family, par->hooknum, skb, par->in, + nfulnl_log_packet(net, par->family, par->hooknum, skb, par->in, par->out, &li, info->prefix); return XT_CONTINUE; } -- cgit v0.10.2 From 61bb3fea44b71dd9935227920b036fdb96936f4d Mon Sep 17 00:00:00 2001 From: Patrik Jakobsson Date: Tue, 14 May 2013 14:37:10 +0200 Subject: drm/gma500: Add fb gtt offset to fb base Old code assumed framebuffer starts at base of stolen memory. Since the addition of hardware cursors, this might not be true anymore so add the gtt offset to the calculation. Reported-by: Holger Schurig Tested-by: Holger Schurig Signed-off-by: Patrik Jakobsson diff --git a/drivers/gpu/drm/gma500/framebuffer.c b/drivers/gpu/drm/gma500/framebuffer.c index 1534e22..8b1b6d9 100644 --- a/drivers/gpu/drm/gma500/framebuffer.c +++ b/drivers/gpu/drm/gma500/framebuffer.c @@ -121,8 +121,8 @@ static int psbfb_vm_fault(struct vm_area_struct *vma, struct vm_fault *vmf) unsigned long address; int ret; unsigned long pfn; - /* FIXME: assumes fb at stolen base which may not be true */ - unsigned long phys_addr = (unsigned long)dev_priv->stolen_base; + unsigned long phys_addr = (unsigned long)dev_priv->stolen_base + + psbfb->gtt->offset; page_num = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; address = (unsigned long)vmf->virtual_address - (vmf->pgoff << PAGE_SHIFT); -- cgit v0.10.2 From 74ba4ec7a2036f9dbe5fcc85c7c737222005507f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Emilio=20L=C3=B3pez?= Date: Wed, 15 May 2013 09:36:41 -0300 Subject: ARM: ux500: select REGULATOR MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit MACH_MOP500 selects REGULATOR_FIXED_VOLTAGE but not REGULATOR. This patch makes it select the latter too. Seen as: warning: (MACH_DOVE_DT && ARCH_KIRKWOOD_DT && MACH_AMS_DELTA && MACH_MOP500 && TPS6105X) selects REGULATOR_FIXED_VOLTAGE which has unmet direct dependencies (REGULATOR) Signed-off-by: Emilio López Signed-off-by: Linus Walleij diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 6a4387e..b19b072 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -51,6 +51,7 @@ config MACH_MOP500 bool "U8500 Development platform, MOP500 versions" select I2C select I2C_NOMADIK + select REGULATOR select REGULATOR_FIXED_VOLTAGE select SOC_BUS select UX500_SOC_DB8500 -- cgit v0.10.2 From c8c18883ba8b8c7f2d9d463c8cf948b944e3c2df Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 25 Apr 2013 17:29:05 +0800 Subject: usb: gadget: zero: fix error return code in zero_bind() Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Introduced by commit cf9a08ae5aece88987bbeee8eb0dd0ebb5015815 (usb: gadget: convert source sink and loopback to new function interface) Acked-by: Michal Nazarewicz Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index 2cd6262..0deb9d6 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -284,12 +284,16 @@ static int __init zero_bind(struct usb_composite_dev *cdev) ss_opts->bulk_buflen = gzero_options.bulk_buflen; func_ss = usb_get_function(func_inst_ss); - if (IS_ERR(func_ss)) + if (IS_ERR(func_ss)) { + status = PTR_ERR(func_ss); goto err_put_func_inst_ss; + } func_inst_lb = usb_get_function_instance("Loopback"); - if (IS_ERR(func_inst_lb)) + if (IS_ERR(func_inst_lb)) { + status = PTR_ERR(func_inst_lb); goto err_put_func_ss; + } lb_opts = container_of(func_inst_lb, struct f_lb_opts, func_inst); lb_opts->bulk_buflen = gzero_options.bulk_buflen; -- cgit v0.10.2 From 4b7e450fb5cefb5865c77999a675330206ab3b8a Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 26 Apr 2013 14:27:09 +0800 Subject: usb: musb: omap2430: add missing platform_device_put() on error in omap2430_probe() Add the missing platform_device_put() before return from omap2430_probe() in the error handling case. Introduced by commit ca784be36cc725bca9b526eba342de7550329731 (usb: start using the control module driver) Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 3551f1a..628b93f 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -549,7 +549,8 @@ static int omap2430_probe(struct platform_device *pdev) glue->control_otghs = omap_get_control_dev(); if (IS_ERR(glue->control_otghs)) { dev_vdbg(&pdev->dev, "Failed to get control device\n"); - return -ENODEV; + ret = PTR_ERR(glue->control_otghs); + goto err2; } } else { glue->control_otghs = ERR_PTR(-ENODEV); -- cgit v0.10.2 From de97f250394996f5acb07ba9e6dbdfc15ee4316c Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Thu, 2 May 2013 09:51:44 -0400 Subject: Correct typo "supperspeed" to "superspeed". Tidy up kernel-doc content for USB GADGET. No functional change. Signed-off-by: Robert P. J. Day Signed-off-by: Felipe Balbi diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index c454a88..f1b0dca 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -563,9 +563,8 @@ static inline int gadget_is_dualspeed(struct usb_gadget *g) } /** - * gadget_is_superspeed() - return true if the hardware handles - * supperspeed - * @g: controller that might support supper speed + * gadget_is_superspeed() - return true if the hardware handles superspeed + * @g: controller that might support superspeed */ static inline int gadget_is_superspeed(struct usb_gadget *g) { -- cgit v0.10.2 From 21c7dee52c02cb4c14f839f16ab538215e52ba13 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Thu, 2 May 2013 10:28:33 -0400 Subject: Add a couple kernel-doc lines to prevent warnings. No functional change. Signed-off-by: Robert P. J. Day Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c index d893d69..abf8a31 100644 --- a/drivers/usb/gadget/f_ecm.c +++ b/drivers/usb/gadget/f_ecm.c @@ -816,6 +816,7 @@ ecm_unbind(struct usb_configuration *c, struct usb_function *f) * @c: the configuration to support the network link * @ethaddr: a buffer in which the ethernet address of the host side * side of the link was recorded + * @dev: eth_dev structure * Context: single threaded during gadget setup * * Returns zero on success, else negative errno. diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c index 185d6f5..7be04b3 100644 --- a/drivers/usb/gadget/f_subset.c +++ b/drivers/usb/gadget/f_subset.c @@ -373,6 +373,7 @@ geth_unbind(struct usb_configuration *c, struct usb_function *f) * @c: the configuration to support the network link * @ethaddr: a buffer in which the ethernet address of the host side * side of the link was recorded + * @dev: eth_dev structure * Context: single threaded during gadget setup * * Returns zero on success, else negative errno. -- cgit v0.10.2 From fb00d6931ab9154cb4d66891909e54907be0798f Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 6 May 2013 17:07:19 +0530 Subject: usb: gadget: atmel_usba_udc: Remove redundant platform_set_drvdata() Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Acked-by: Nicolas Ferre Signed-off-by: Sachin Kamat Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index f2a970f..5a5128a 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -1992,8 +1992,6 @@ err_map_regs: err_get_hclk: clk_put(pclk); - platform_set_drvdata(pdev, NULL); - return ret; } -- cgit v0.10.2 From e80ad12389e12813888b7ce45d6f5986d6f41779 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 6 May 2013 17:07:20 +0530 Subject: usb: gadget: bcm63xx_udc: Remove redundant platform_set_drvdata() Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat Cc: Kevin Cernekee Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/bcm63xx_udc.c b/drivers/usb/gadget/bcm63xx_udc.c index 6e65182..9780c57 100644 --- a/drivers/usb/gadget/bcm63xx_udc.c +++ b/drivers/usb/gadget/bcm63xx_udc.c @@ -2420,7 +2420,6 @@ static int bcm63xx_udc_remove(struct platform_device *pdev) usb_del_gadget_udc(&udc->gadget); BUG_ON(udc->driver); - platform_set_drvdata(pdev, NULL); bcm63xx_uninit_udc_hw(udc); return 0; -- cgit v0.10.2 From a0c67276ee46a034ed1016fa4d8a1d54ab73aa15 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 6 May 2013 17:07:21 +0530 Subject: usb: gadget: dummy_hcd: Remove redundant platform_set_drvdata() Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat Cc: Alan Stern Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index a792e32..22236ec 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -1001,7 +1001,6 @@ static int dummy_udc_remove(struct platform_device *pdev) struct dummy *dum = platform_get_drvdata(pdev); usb_del_gadget_udc(&dum->gadget); - platform_set_drvdata(pdev, NULL); device_remove_file(&dum->gadget.dev, &dev_attr_function); return 0; } -- cgit v0.10.2 From a038391d8dcdb1408dcfd80c896fed98ac848cb2 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 6 May 2013 17:07:22 +0530 Subject: usb: gadget: f_uac2: Remove redundant platform_set_drvdata() Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Acked-by: Jaswinder Singh Signed-off-by: Sachin Kamat Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/f_uac2.c b/drivers/usb/gadget/f_uac2.c index c7468b6..03c1fb6 100644 --- a/drivers/usb/gadget/f_uac2.c +++ b/drivers/usb/gadget/f_uac2.c @@ -456,8 +456,6 @@ static int snd_uac2_remove(struct platform_device *pdev) { struct snd_card *card = platform_get_drvdata(pdev); - platform_set_drvdata(pdev, NULL); - if (card) return snd_card_free(card); -- cgit v0.10.2 From 2673976f7a80dfdf1b590e40c773aee01e62ada7 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 6 May 2013 17:07:23 +0530 Subject: usb: gadget: imx_udc: Remove redundant platform_set_drvdata() Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat Cc: Darius Augulis Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c index b5cebd6..9b2d24e 100644 --- a/drivers/usb/gadget/imx_udc.c +++ b/drivers/usb/gadget/imx_udc.c @@ -1511,8 +1511,6 @@ static int __exit imx_udc_remove(struct platform_device *pdev) if (pdata->exit) pdata->exit(&pdev->dev); - platform_set_drvdata(pdev, NULL); - return 0; } -- cgit v0.10.2 From c0b4e04d1a984dec4d6704ac3fcf289b1cb32993 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 6 May 2013 17:07:24 +0530 Subject: usb: gadget: pxa25x_udc: Remove redundant platform_set_drvdata() Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat Cc: Eric Miao Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index ef47495..95c531d 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -2236,7 +2236,6 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev) dev->transceiver = NULL; } - platform_set_drvdata(pdev, NULL); the_controller = NULL; return 0; } -- cgit v0.10.2 From 03fc1d84e13a26cdbd376b3a2658a64d2b978cd3 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 6 May 2013 17:07:25 +0530 Subject: usb: gadget: s3c2410_udc: Remove redundant platform_set_drvdata() Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index d0e75e1..7f5e3a6 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -1948,8 +1948,6 @@ static int s3c2410_udc_remove(struct platform_device *pdev) iounmap(base_addr); release_mem_region(rsrc_start, rsrc_len); - platform_set_drvdata(pdev, NULL); - if (!IS_ERR(udc_clock) && udc_clock != NULL) { clk_disable(udc_clock); clk_put(udc_clock); -- cgit v0.10.2 From c8a0b5c687bfc3fce4bcc6a1e7c354f40b38bbc9 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 6 May 2013 17:22:19 +0530 Subject: usb: phy: ab8500-usb: Remove redundant platform_set_drvdata() Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat Signed-off-by: Felipe Balbi diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c index 4acef26..e5eb1b5 100644 --- a/drivers/usb/phy/phy-ab8500-usb.c +++ b/drivers/usb/phy/phy-ab8500-usb.c @@ -892,8 +892,6 @@ static int ab8500_usb_remove(struct platform_device *pdev) else if (ab->mode == USB_PERIPHERAL) ab8500_usb_peri_phy_dis(ab); - platform_set_drvdata(pdev, NULL); - return 0; } -- cgit v0.10.2 From a9b1bddc7a171c89b4fd4c132202b5b2118f3905 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 6 May 2013 17:22:20 +0530 Subject: usb: phy: gpio-vbus-usb: Remove redundant platform_set_drvdata() Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat Cc: Philipp Zabel Signed-off-by: Felipe Balbi diff --git a/drivers/usb/phy/phy-gpio-vbus-usb.c b/drivers/usb/phy/phy-gpio-vbus-usb.c index 4c76074..1d32af2 100644 --- a/drivers/usb/phy/phy-gpio-vbus-usb.c +++ b/drivers/usb/phy/phy-gpio-vbus-usb.c @@ -343,7 +343,6 @@ err_irq: gpio_free(pdata->gpio_pullup); gpio_free(pdata->gpio_vbus); err_gpio: - platform_set_drvdata(pdev, NULL); kfree(gpio_vbus->phy.otg); kfree(gpio_vbus); return err; @@ -365,7 +364,6 @@ static int __exit gpio_vbus_remove(struct platform_device *pdev) if (gpio_is_valid(pdata->gpio_pullup)) gpio_free(pdata->gpio_pullup); gpio_free(gpio); - platform_set_drvdata(pdev, NULL); kfree(gpio_vbus->phy.otg); kfree(gpio_vbus); -- cgit v0.10.2 From c21b7eeaeeb8cdeecbb3c14204eecf604071620f Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 6 May 2013 17:22:21 +0530 Subject: usb: phy: mv-usb: Remove redundant platform_set_drvdata() Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat Cc: Chao Xie Signed-off-by: Felipe Balbi diff --git a/drivers/usb/phy/phy-mv-usb.c b/drivers/usb/phy/phy-mv-usb.c index c987bbe..4a6b03c 100644 --- a/drivers/usb/phy/phy-mv-usb.c +++ b/drivers/usb/phy/phy-mv-usb.c @@ -667,7 +667,6 @@ int mv_otg_remove(struct platform_device *pdev) mv_otg_disable(mvotg); usb_remove_phy(&mvotg->phy); - platform_set_drvdata(pdev, NULL); return 0; } @@ -850,8 +849,6 @@ err_destroy_workqueue: flush_workqueue(mvotg->qwork); destroy_workqueue(mvotg->qwork); - platform_set_drvdata(pdev, NULL); - return retval; } -- cgit v0.10.2 From 99f80cfc00084a4aa87372095cca7a279db12ce2 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 6 May 2013 17:22:22 +0530 Subject: usb: phy: mxs-usb: Remove redundant platform_set_drvdata() Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat Cc: Marek Vasut Signed-off-by: Felipe Balbi diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index 9d4381e..3b64277 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -180,8 +180,6 @@ static int mxs_phy_remove(struct platform_device *pdev) usb_remove_phy(&mxs_phy->phy); - platform_set_drvdata(pdev, NULL); - return 0; } -- cgit v0.10.2 From 9eff37a8713939f218ab8bf0dc93f1d67af7b8b4 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 5 Nov 2012 09:42:17 +0300 Subject: xen/privcmd: fix condition in privcmd_close() The parenthesis are in the wrong place so the original code is equivalent to: if (!xen_feature(XENFEAT_writable_descriptor_tables)) { ... Which obviously was not intended. Signed-off-by: Dan Carpenter Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/privcmd.c b/drivers/xen/privcmd.c index ca2b00e..2cfc24d 100644 --- a/drivers/xen/privcmd.c +++ b/drivers/xen/privcmd.c @@ -504,7 +504,7 @@ static void privcmd_close(struct vm_area_struct *vma) struct page **pages = vma->vm_private_data; int numpgs = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; - if (!xen_feature(XENFEAT_auto_translated_physmap || !numpgs || !pages)) + if (!xen_feature(XENFEAT_auto_translated_physmap) || !numpgs || !pages) return; xen_unmap_domain_mfn_range(vma, numpgs, pages); -- cgit v0.10.2 From 8fe61203687a67eb1db338a4b7198a8037ca96c8 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 6 May 2013 17:22:23 +0530 Subject: usb: phy: nop: Remove redundant platform_set_drvdata() Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat Signed-off-by: Felipe Balbi diff --git a/drivers/usb/phy/phy-nop.c b/drivers/usb/phy/phy-nop.c index 2b10cc9..638cc5d 100644 --- a/drivers/usb/phy/phy-nop.c +++ b/drivers/usb/phy/phy-nop.c @@ -254,8 +254,6 @@ static int nop_usb_xceiv_remove(struct platform_device *pdev) usb_remove_phy(&nop->phy); - platform_set_drvdata(pdev, NULL); - return 0; } -- cgit v0.10.2 From b25e5f1c4416cf96fac0918a8f1b0429642570a9 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 7 May 2013 19:47:44 +0800 Subject: usb: musb: dsps: fix error return code in dsps_create_musb_pdev() Fix to return -ENOMEM in the devm_kzalloc() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 3a18e44..e1b661d 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -560,6 +560,7 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue, u8 id) if (!config) { dev_err(&pdev->dev, "failed to allocate musb hdrc config\n"); + ret = -ENOMEM; goto err2; } -- cgit v0.10.2 From 48ad20f32d1153ad6a0a95ad2bfc391daa13fcad Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 7 May 2013 19:48:22 +0800 Subject: usb: gadget: s3c2410_udc: fix error return code in s3c2410_udc_probe() Fix to return a negative error code in the gpio_to_irq() error handling case instead of 0, as done elsewhere in this function. Reviewed-by: Jingoo Han Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index 7f5e3a6..09c4f70 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -1851,6 +1851,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev) irq = gpio_to_irq(udc_info->vbus_pin); if (irq < 0) { dev_err(dev, "no irq for gpio vbus pin\n"); + retval = irq; goto err_gpio_claim; } -- cgit v0.10.2 From f3423d3258cd9939c06df75a582b16d52fc2249f Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 7 May 2013 19:48:50 +0800 Subject: usb: gadget: r8a66597-udc: fix error return code in r8a66597_probe() Fix to return -ENOMEM in the request alloc error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c index 0b742d1..7ff7d9c 100644 --- a/drivers/usb/gadget/r8a66597-udc.c +++ b/drivers/usb/gadget/r8a66597-udc.c @@ -1977,8 +1977,10 @@ static int __init r8a66597_probe(struct platform_device *pdev) r8a66597->ep0_req = r8a66597_alloc_request(&r8a66597->ep[0].ep, GFP_KERNEL); - if (r8a66597->ep0_req == NULL) + if (r8a66597->ep0_req == NULL) { + ret = -ENOMEM; goto clean_up3; + } r8a66597->ep0_req->complete = nop_completion; ret = usb_add_gadget_udc(&pdev->dev, &r8a66597->gadget); -- cgit v0.10.2 From ef89a1f3a84d127bdcda7e4dd54f763d2f88203f Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 7 May 2013 19:49:08 +0800 Subject: usb: gadget: m66592-udc: fix error return code in m66592_probe() Fix to return -ENOMEM in the request alloc error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c index 866ef09..51cfe72 100644 --- a/drivers/usb/gadget/m66592-udc.c +++ b/drivers/usb/gadget/m66592-udc.c @@ -1660,8 +1660,10 @@ static int __init m66592_probe(struct platform_device *pdev) m66592->epaddr2ep[0] = &m66592->ep[0]; m66592->ep0_req = m66592_alloc_request(&m66592->ep[0].ep, GFP_KERNEL); - if (m66592->ep0_req == NULL) + if (m66592->ep0_req == NULL) { + ret = -ENOMEM; goto clean_up3; + } m66592->ep0_req->complete = nop_completion; init_controller(m66592); -- cgit v0.10.2 From c3661951032d002d710c2187c5d9dbc8b4cabfa2 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 7 May 2013 19:49:37 +0800 Subject: usb: gadget: fusb300_udc: fix error return code in fusb300_probe() Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c index cec8871..b8632d4 100644 --- a/drivers/usb/gadget/fusb300_udc.c +++ b/drivers/usb/gadget/fusb300_udc.c @@ -1461,8 +1461,10 @@ static int __init fusb300_probe(struct platform_device *pdev) fusb300->ep0_req = fusb300_alloc_request(&fusb300->ep[0]->ep, GFP_KERNEL); - if (fusb300->ep0_req == NULL) + if (fusb300->ep0_req == NULL) { + ret = -ENOMEM; goto clean_up3; + } init_controller(fusb300); ret = usb_add_gadget_udc(&pdev->dev, &fusb300->gadget); -- cgit v0.10.2 From 481d30427e5506fc1f5c27bbb94faef9d1ec72a0 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 7 May 2013 19:50:06 +0800 Subject: usb: gadget: dummy_hcd: fix error return code in init() Fix to return -ENOMEM in the kzalloc() error handling case instead of 0(following platform_device_add_data() will overwrite it to 0), as done elsewhere in this function. Acked-by: Alan Stern Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 22236ec..c588e8e 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -2660,8 +2660,10 @@ static int __init init(void) } for (i = 0; i < mod_data.num; i++) { dum[i] = kzalloc(sizeof(struct dummy), GFP_KERNEL); - if (!dum[i]) + if (!dum[i]) { + retval = -ENOMEM; goto err_add_pdata; + } retval = platform_device_add_data(the_hcd_pdev[i], &dum[i], sizeof(void *)); if (retval) -- cgit v0.10.2 From fea77077d1623c6a8d586266cf55c2289360bea3 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 7 May 2013 19:50:31 +0800 Subject: usb: gadget: fix error return code in configfs_composite_bind() Fix to return a negative error code in the go through all configs error handling case instead of 0(usb_add_function() will overwrite ret to 0). Also use error code from usb_gstrings_attach() in all strings init error case instead of -EINVAL. Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c index 3d5cfc9..80e7f75 100644 --- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -821,8 +821,10 @@ static int configfs_composite_bind(struct usb_gadget *gadget, gi->gstrings[i] = NULL; s = usb_gstrings_attach(&gi->cdev, gi->gstrings, USB_GADGET_FIRST_AVAIL_IDX); - if (IS_ERR(s)) + if (IS_ERR(s)) { + ret = PTR_ERR(s); goto err_comp_cleanup; + } gi->cdev.desc.iManufacturer = s[USB_GADGET_MANUFACTURER_IDX].id; gi->cdev.desc.iProduct = s[USB_GADGET_PRODUCT_IDX].id; @@ -847,8 +849,10 @@ static int configfs_composite_bind(struct usb_gadget *gadget, } cfg->gstrings[i] = NULL; s = usb_gstrings_attach(&gi->cdev, cfg->gstrings, 1); - if (IS_ERR(s)) + if (IS_ERR(s)) { + ret = PTR_ERR(s); goto err_comp_cleanup; + } c->iConfiguration = s[0].id; } -- cgit v0.10.2 From 1bc0d926895bf86cf2b848c5d02cb422e275bbbb Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Tue, 14 May 2013 17:32:16 +0530 Subject: usb: dwc3: Fix compilation break when building with USB_DWC3_DUAL_ROLE=y The commit: 388e5c5 usb: dwc3: remove dwc3 dependency on host AND gadget breaks compilation when USB=y, USB_GADGET=m, USB_DWC3=y and USB_DWC3_DUAL_ROLE=y. drivers/built-in.o: In function `dwc3_gadget_giveback': drivers/usb/dwc3/gadget.c:271: undefined reference to `usb_gadget_unmap_request' drivers/built-in.o: In function `__dwc3_gadget_kick_transfer': drivers/usb/dwc3/gadget.c:1005: undefined reference to `usb_gadget_unmap_request' drivers/built-in.o: In function `__dwc3_gadget_ep_queue': drivers/usb/dwc3/gadget.c:1073: undefined reference to `usb_gadget_map_request' drivers/built-in.o: In function `dwc3_gadget_reset_interrupt': drivers/usb/dwc3/gadget.c:2165: undefined reference to `usb_gadget_set_state' drivers/built-in.o: In function `dwc3_gadget_init': drivers/usb/dwc3/gadget.c:2647: undefined reference to `usb_add_gadget_udc' drivers/built-in.o: In function `dwc3_gadget_exit': drivers/usb/dwc3/gadget.c:2681: undefined reference to `usb_del_gadget_udc' drivers/built-in.o: In function `__dwc3_ep0_do_control_data': drivers/usb/dwc3/ep0.c:929: undefined reference to `usb_gadget_map_request' drivers/usb/dwc3/ep0.c:906: undefined reference to `usb_gadget_map_request' drivers/built-in.o: In function `dwc3_ep0_set_config': drivers/usb/dwc3/ep0.c:575: undefined reference to `usb_gadget_set_state' drivers/built-in.o: In function `dwc3_ep0_set_address': drivers/usb/dwc3/ep0.c:520: undefined reference to `usb_gadget_set_state' drivers/usb/dwc3/ep0.c:522: undefined reference to `usb_gadget_set_state' drivers/built-in.o: In function `dwc3_ep0_set_config': drivers/usb/dwc3/ep0.c:556: undefined reference to `usb_gadget_set_state' Making changes similar to patch: 71a5e61 usb: chipidea: fix and improve dependencies if usb host or gadget support is built as module Let us limit the DWC3 mode to depend on corresponding usb-subsystem and USB_DWC3. Signed-off-by: Vivek Gautam Cc: Felipe Balbi Cc: Fengguang Wu Signed-off-by: Felipe Balbi diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index ea5ee9c..757aa18 100644 --- a/drivers/usb/dwc3/Kconfig +++ b/drivers/usb/dwc3/Kconfig @@ -19,21 +19,21 @@ choice config USB_DWC3_HOST bool "Host only mode" - depends on USB + depends on USB=y || USB=USB_DWC3 help Select this when you want to use DWC3 in host mode only, thereby the gadget feature will be regressed. config USB_DWC3_GADGET bool "Gadget only mode" - depends on USB_GADGET + depends on USB_GADGET=y || USB_GADGET=USB_DWC3 help Select this when you want to use DWC3 in gadget mode only, thereby the host feature will be regressed. config USB_DWC3_DUAL_ROLE bool "Dual Role mode" - depends on (USB && USB_GADGET) + depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3)) help This is the default mode of working of DWC3 controller where both host and gadget features are enabled. -- cgit v0.10.2 From a5e9cd952e2ee215286ea3ec5e6b3aa669e04e0e Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 8 May 2013 15:16:23 -0400 Subject: xen/tmem: Cleanup. Remove the parts that say temporary. Frontswap is upstream, no need to having this #ifdef. Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/tmem.c b/drivers/xen/tmem.c index e3600be..5686d6d 100644 --- a/drivers/xen/tmem.c +++ b/drivers/xen/tmem.c @@ -11,11 +11,7 @@ #include #include #include - -/* temporary ifdef until include/linux/frontswap.h is upstream */ -#ifdef CONFIG_FRONTSWAP #include -#endif #include #include -- cgit v0.10.2 From 0cb401d44e1152658c99c8566de915c2d71eab9e Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 8 May 2013 15:50:59 -0400 Subject: xen/tmem: Move all of the boot and module parameters to the top of the file. Just code movement to see the different boot or module parameters. Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/tmem.c b/drivers/xen/tmem.c index 5686d6d..edf7e18 100644 --- a/drivers/xen/tmem.c +++ b/drivers/xen/tmem.c @@ -20,6 +20,51 @@ #include #include +#ifndef CONFIG_XEN_TMEM_MODULE +bool __read_mostly tmem_enabled = false; + +static int __init enable_tmem(char *s) +{ + tmem_enabled = true; + return 1; +} +__setup("tmem", enable_tmem); +#endif + +#ifdef CONFIG_CLEANCACHE +static bool disable_cleancache __read_mostly; +static bool disable_selfballooning __read_mostly; +#ifdef CONFIG_XEN_TMEM_MODULE +module_param(disable_cleancache, bool, S_IRUGO); +module_param(disable_selfballooning, bool, S_IRUGO); +#else +static int __init no_cleancache(char *s) +{ + disable_cleancache = true; + return 1; +} +__setup("nocleancache", no_cleancache); +#endif +#endif /* CONFIG_CLEANCACHE */ + +#ifdef CONFIG_FRONTSWAP +static bool disable_frontswap __read_mostly; +static bool disable_frontswap_selfshrinking __read_mostly; +#ifdef CONFIG_XEN_TMEM_MODULE +module_param(disable_frontswap, bool, S_IRUGO); +module_param(disable_frontswap_selfshrinking, bool, S_IRUGO); +#else +static int __init no_frontswap(char *s) +{ + disable_frontswap = true; + return 1; +} +__setup("nofrontswap", no_frontswap); +#endif +#else /* CONFIG_FRONTSWAP */ +#define disable_frontswap_selfshrinking 1 +#endif /* CONFIG_FRONTSWAP */ + #define TMEM_CONTROL 0 #define TMEM_NEW_POOL 1 #define TMEM_DESTROY_POOL 2 @@ -125,16 +170,6 @@ static int xen_tmem_flush_object(u32 pool_id, struct tmem_oid oid) return xen_tmem_op(TMEM_FLUSH_OBJECT, pool_id, oid, 0, 0, 0, 0, 0); } -#ifndef CONFIG_XEN_TMEM_MODULE -bool __read_mostly tmem_enabled = false; - -static int __init enable_tmem(char *s) -{ - tmem_enabled = true; - return 1; -} -__setup("tmem", enable_tmem); -#endif #ifdef CONFIG_CLEANCACHE static int xen_tmem_destroy_pool(u32 pool_id) @@ -226,20 +261,6 @@ static int tmem_cleancache_init_shared_fs(char *uuid, size_t pagesize) return xen_tmem_new_pool(shared_uuid, TMEM_POOL_SHARED, pagesize); } -static bool disable_cleancache __read_mostly; -static bool disable_selfballooning __read_mostly; -#ifdef CONFIG_XEN_TMEM_MODULE -module_param(disable_cleancache, bool, S_IRUGO); -module_param(disable_selfballooning, bool, S_IRUGO); -#else -static int __init no_cleancache(char *s) -{ - disable_cleancache = true; - return 1; -} -__setup("nocleancache", no_cleancache); -#endif - static struct cleancache_ops tmem_cleancache_ops = { .put_page = tmem_cleancache_put_page, .get_page = tmem_cleancache_get_page, @@ -357,20 +378,6 @@ static void tmem_frontswap_init(unsigned ignored) xen_tmem_new_pool(private, TMEM_POOL_PERSIST, PAGE_SIZE); } -static bool disable_frontswap __read_mostly; -static bool disable_frontswap_selfshrinking __read_mostly; -#ifdef CONFIG_XEN_TMEM_MODULE -module_param(disable_frontswap, bool, S_IRUGO); -module_param(disable_frontswap_selfshrinking, bool, S_IRUGO); -#else -static int __init no_frontswap(char *s) -{ - disable_frontswap = true; - return 1; -} -__setup("nofrontswap", no_frontswap); -#endif - static struct frontswap_ops tmem_frontswap_ops = { .store = tmem_frontswap_store, .load = tmem_frontswap_load, @@ -378,8 +385,6 @@ static struct frontswap_ops tmem_frontswap_ops = { .invalidate_area = tmem_frontswap_flush_area, .init = tmem_frontswap_init }; -#else /* CONFIG_FRONTSWAP */ -#define disable_frontswap_selfshrinking 1 #endif static int xen_tmem_init(void) -- cgit v0.10.2 From e8f9cb034b1cb633ff920ec65381a2e7ac1d76f2 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 8 May 2013 15:58:06 -0400 Subject: xen/tmem: Split out the different module/boot options. There are three options - depending on what combination of CONFIG_FRONTSWAP, CONFIG_CLEANCACHE and CONFIG_XEN_SELFBALLOONING is used. Lets split them out nicely out in three groups to make it easier to clean up. Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/tmem.c b/drivers/xen/tmem.c index edf7e18..c2ee188 100644 --- a/drivers/xen/tmem.c +++ b/drivers/xen/tmem.c @@ -49,10 +49,8 @@ __setup("nocleancache", no_cleancache); #ifdef CONFIG_FRONTSWAP static bool disable_frontswap __read_mostly; -static bool disable_frontswap_selfshrinking __read_mostly; #ifdef CONFIG_XEN_TMEM_MODULE module_param(disable_frontswap, bool, S_IRUGO); -module_param(disable_frontswap_selfshrinking, bool, S_IRUGO); #else static int __init no_frontswap(char *s) { @@ -61,8 +59,15 @@ static int __init no_frontswap(char *s) } __setup("nofrontswap", no_frontswap); #endif -#else /* CONFIG_FRONTSWAP */ +#endif /* CONFIG_FRONTSWAP */ + +#ifdef CONFIG_FRONTSWAP +static bool disable_frontswap_selfshrinking __read_mostly; +#ifdef CONFIG_XEN_TMEM_MODULE +module_param(disable_frontswap_selfshrinking, bool, S_IRUGO); +#else #define disable_frontswap_selfshrinking 1 +#endif #endif /* CONFIG_FRONTSWAP */ #define TMEM_CONTROL 0 -- cgit v0.10.2 From 23972c639980ba796a05ae9432df8267175b99ae Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 8 May 2013 16:57:35 -0400 Subject: xen/tmem: Fix compile warning. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We keep on getting: drivers/xen/tmem.c:65:13: warning: ‘disable_frontswap_selfshrinking’ defined but not used [-Wunused-variable] if CONFIG_FRONTSWAP=y and # CONFIG_CLEANCACHE is not set Found by 0 day test project Reported-by: Fengguang Wu Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/tmem.c b/drivers/xen/tmem.c index c2ee188..30bf974 100644 --- a/drivers/xen/tmem.c +++ b/drivers/xen/tmem.c @@ -61,14 +61,12 @@ __setup("nofrontswap", no_frontswap); #endif #endif /* CONFIG_FRONTSWAP */ -#ifdef CONFIG_FRONTSWAP +#ifdef CONFIG_XEN_SELFBALLOONING static bool disable_frontswap_selfshrinking __read_mostly; #ifdef CONFIG_XEN_TMEM_MODULE module_param(disable_frontswap_selfshrinking, bool, S_IRUGO); -#else -#define disable_frontswap_selfshrinking 1 #endif -#endif /* CONFIG_FRONTSWAP */ +#endif /* CONFIG_XEN_SELFBALLOONING */ #define TMEM_CONTROL 0 #define TMEM_NEW_POOL 1 -- cgit v0.10.2 From 9fd19653faceef210f30901f7cee0ceb13c6f39a Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 8 May 2013 17:10:08 -0400 Subject: xen/tmem: s/disable_// and change the logic. The variety of disable_[cleancache|frontswap|selfshrinking] are making this a bit complex. Just remove the "disable_" part and change the logic around for the "nofrontswap" and "nocleancache" parameters. Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/tmem.c b/drivers/xen/tmem.c index 30bf974..411c7e3 100644 --- a/drivers/xen/tmem.c +++ b/drivers/xen/tmem.c @@ -32,15 +32,15 @@ __setup("tmem", enable_tmem); #endif #ifdef CONFIG_CLEANCACHE -static bool disable_cleancache __read_mostly; -static bool disable_selfballooning __read_mostly; +static bool cleancache __read_mostly = true; +static bool selfballooning __read_mostly = true; #ifdef CONFIG_XEN_TMEM_MODULE -module_param(disable_cleancache, bool, S_IRUGO); -module_param(disable_selfballooning, bool, S_IRUGO); +module_param(cleancache, bool, S_IRUGO); +module_param(selfballooning, bool, S_IRUGO); #else static int __init no_cleancache(char *s) { - disable_cleancache = true; + cleancache = false; return 1; } __setup("nocleancache", no_cleancache); @@ -48,13 +48,13 @@ __setup("nocleancache", no_cleancache); #endif /* CONFIG_CLEANCACHE */ #ifdef CONFIG_FRONTSWAP -static bool disable_frontswap __read_mostly; +static bool frontswap __read_mostly = true; #ifdef CONFIG_XEN_TMEM_MODULE -module_param(disable_frontswap, bool, S_IRUGO); +module_param(frontswap, bool, S_IRUGO); #else static int __init no_frontswap(char *s) { - disable_frontswap = true; + frontswap = false; return 1; } __setup("nofrontswap", no_frontswap); @@ -62,9 +62,9 @@ __setup("nofrontswap", no_frontswap); #endif /* CONFIG_FRONTSWAP */ #ifdef CONFIG_XEN_SELFBALLOONING -static bool disable_frontswap_selfshrinking __read_mostly; +static bool frontswap_selfshrinking __read_mostly = true; #ifdef CONFIG_XEN_TMEM_MODULE -module_param(disable_frontswap_selfshrinking, bool, S_IRUGO); +module_param(frontswap_selfshrinking, bool, S_IRUGO); #endif #endif /* CONFIG_XEN_SELFBALLOONING */ @@ -395,7 +395,7 @@ static int xen_tmem_init(void) if (!xen_domain()) return 0; #ifdef CONFIG_FRONTSWAP - if (tmem_enabled && !disable_frontswap) { + if (tmem_enabled && frontswap) { char *s = ""; struct frontswap_ops *old_ops = frontswap_register_ops(&tmem_frontswap_ops); @@ -412,7 +412,7 @@ static int xen_tmem_init(void) #endif #ifdef CONFIG_CLEANCACHE BUG_ON(sizeof(struct cleancache_filekey) != sizeof(struct tmem_oid)); - if (tmem_enabled && !disable_cleancache) { + if (tmem_enabled && cleancache) { char *s = ""; struct cleancache_ops *old_ops = cleancache_register_ops(&tmem_cleancache_ops); @@ -423,8 +423,7 @@ static int xen_tmem_init(void) } #endif #ifdef CONFIG_XEN_SELFBALLOONING - xen_selfballoon_init(!disable_selfballooning, - !disable_frontswap_selfshrinking); + xen_selfballoon_init(selfballooning, frontswap_selfshrinking); #endif return 0; } -- cgit v0.10.2 From 2ca62b044457e3aacaa06684974b0ff40b2f5a94 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 8 May 2013 17:12:44 -0400 Subject: xen/tmem: Remove the boot options and fold them in the tmem.X parameters. If tmem is built-in or a module, the user has the option on the command line to influence it by doing: tmem. instead of having a variety of "nocleancache", and "nofrontswap". The others: "noselfballooning" and "selfballooning"; and "noselfshrink" are in a different driver xen-selfballoon.c and the patches: xen/tmem: Remove the usage of 'noselfshrink' and use 'tmem.selfshrink' bool instead. xen/tmem: Remove the usage of 'noselfballoon','selfballoon' and use 'tmem.selfballon' bool instead. remove them. Also add documentation. Signed-off-by: Konrad Rzeszutek Wilk diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index c3bfacb..3de01ed 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -3005,6 +3005,26 @@ bytes respectively. Such letter suffixes can also be entirely omitted. Force threading of all interrupt handlers except those marked explicitly IRQF_NO_THREAD. + tmem [KNL,XEN] + Enable the Transcendent memory driver if built-in. + + tmem.cleancache=0|1 [KNL, XEN] + Default is on (1). Disable the usage of the cleancache + API to send anonymous pages to the hypervisor. + + tmem.frontswap=0|1 [KNL, XEN] + Default is on (1). Disable the usage of the frontswap + API to send swap pages to the hypervisor. + + tmem.selfballooning=0|1 [KNL, XEN] + Default is on (1). Disable the driving of swap pages + to the hypervisor. + + tmem.selfshrinking=0|1 [KNL, XEN] + Default is on (1). Partial swapoff that immediately + transfers pages from Xen hypervisor back to the + kernel based on different criteria. + topology= [S390] Format: {off | on} Specify if the kernel should make use of the cpu diff --git a/drivers/xen/tmem.c b/drivers/xen/tmem.c index 411c7e3..c1df0ff 100644 --- a/drivers/xen/tmem.c +++ b/drivers/xen/tmem.c @@ -33,39 +33,19 @@ __setup("tmem", enable_tmem); #ifdef CONFIG_CLEANCACHE static bool cleancache __read_mostly = true; -static bool selfballooning __read_mostly = true; -#ifdef CONFIG_XEN_TMEM_MODULE module_param(cleancache, bool, S_IRUGO); +static bool selfballooning __read_mostly = true; module_param(selfballooning, bool, S_IRUGO); -#else -static int __init no_cleancache(char *s) -{ - cleancache = false; - return 1; -} -__setup("nocleancache", no_cleancache); -#endif #endif /* CONFIG_CLEANCACHE */ #ifdef CONFIG_FRONTSWAP static bool frontswap __read_mostly = true; -#ifdef CONFIG_XEN_TMEM_MODULE module_param(frontswap, bool, S_IRUGO); -#else -static int __init no_frontswap(char *s) -{ - frontswap = false; - return 1; -} -__setup("nofrontswap", no_frontswap); -#endif #endif /* CONFIG_FRONTSWAP */ #ifdef CONFIG_XEN_SELFBALLOONING -static bool frontswap_selfshrinking __read_mostly = true; -#ifdef CONFIG_XEN_TMEM_MODULE -module_param(frontswap_selfshrinking, bool, S_IRUGO); -#endif +static bool selfshrinking __read_mostly = true; +module_param(selfshrinking, bool, S_IRUGO); #endif /* CONFIG_XEN_SELFBALLOONING */ #define TMEM_CONTROL 0 @@ -423,7 +403,7 @@ static int xen_tmem_init(void) } #endif #ifdef CONFIG_XEN_SELFBALLOONING - xen_selfballoon_init(selfballooning, frontswap_selfshrinking); + xen_selfballoon_init(selfballooning, selfshrinking); #endif return 0; } -- cgit v0.10.2 From 54598d1b034624dc0817fca3f2c7fd914938b7c8 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 8 May 2013 16:44:06 -0400 Subject: xen/tmem: Remove the usage of 'noselfshrink' and use 'tmem.selfshrink' bool instead. As the 'tmem' driver is the one that actually sets whether it will use it or not so might as well make tmem responsible for this knob. Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig index f03bf50..98e9744 100644 --- a/drivers/xen/Kconfig +++ b/drivers/xen/Kconfig @@ -22,7 +22,7 @@ config XEN_SELFBALLOONING ballooning is disabled by default but can be enabled with the 'selfballooning' kernel boot parameter. If FRONTSWAP is configured, frontswap-selfshrinking is enabled by default but can be disabled - with the 'noselfshrink' kernel boot parameter; and self-ballooning + with the 'tmem.selfshrink=0' kernel boot parameter; and self-ballooning is enabled by default but can be disabled with the 'noselfballooning' kernel boot parameter. Note that systems without a sufficiently large swap device should not enable self-ballooning. diff --git a/drivers/xen/xen-selfballoon.c b/drivers/xen/xen-selfballoon.c index f2ef569..012f9d9 100644 --- a/drivers/xen/xen-selfballoon.c +++ b/drivers/xen/xen-selfballoon.c @@ -60,8 +60,8 @@ * be enabled with the "selfballooning" kernel boot option; similarly * selfballooning is enabled by default if frontswap is configured and * can be disabled with the "noselfballooning" kernel boot option. Finally, - * when frontswap is configured, frontswap-selfshrinking can be disabled - * with the "noselfshrink" kernel boot option. + * when frontswap is configured,frontswap-selfshrinking can be disabled + * with the "tmem.selfshrink=0" kernel boot option. * * Selfballooning is disallowed in domain0 and force-disabled. * @@ -120,9 +120,6 @@ static DECLARE_DELAYED_WORK(selfballoon_worker, selfballoon_process); /* Enable/disable with sysfs. */ static bool frontswap_selfshrinking __read_mostly; -/* Enable/disable with kernel boot option. */ -static bool use_frontswap_selfshrink = true; - /* * The default values for the following parameters were deemed reasonable * by experimentation, may be workload-dependent, and can all be @@ -176,14 +173,6 @@ static void frontswap_selfshrink(void) frontswap_shrink(tgt_frontswap_pages); } -static int __init xen_nofrontswap_selfshrink_setup(char *s) -{ - use_frontswap_selfshrink = false; - return 1; -} - -__setup("noselfshrink", xen_nofrontswap_selfshrink_setup); - /* Disable with kernel boot option. */ static bool use_selfballooning = true; -- cgit v0.10.2 From ed4f346a008edda8ee08ffcdc642691847636954 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 8 May 2013 16:52:38 -0400 Subject: xen/tmem: Remove the usage of '[no|]selfballoon' and use 'tmem.selfballooning' bool instead. As the 'tmem' driver is the one that actually sets whether it will use it (or not) so might as well make tmem responsible for this knob. Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig index 98e9744..9e02d60 100644 --- a/drivers/xen/Kconfig +++ b/drivers/xen/Kconfig @@ -19,11 +19,10 @@ config XEN_SELFBALLOONING by the current usage of anonymous memory ("committed AS") and controlled by various sysfs-settable parameters. Configuring FRONTSWAP is highly recommended; if it is not configured, self- - ballooning is disabled by default but can be enabled with the - 'selfballooning' kernel boot parameter. If FRONTSWAP is configured, + ballooning is disabled by default. If FRONTSWAP is configured, frontswap-selfshrinking is enabled by default but can be disabled with the 'tmem.selfshrink=0' kernel boot parameter; and self-ballooning - is enabled by default but can be disabled with the 'noselfballooning' + is enabled by default but can be disabled with the 'tmem.selfballooning=0' kernel boot parameter. Note that systems without a sufficiently large swap device should not enable self-ballooning. diff --git a/drivers/xen/xen-selfballoon.c b/drivers/xen/xen-selfballoon.c index 012f9d9..5d637e2 100644 --- a/drivers/xen/xen-selfballoon.c +++ b/drivers/xen/xen-selfballoon.c @@ -57,9 +57,9 @@ * configured, it is highly recommended that frontswap also be configured * and enabled when selfballooning is running. So, selfballooning * is disabled by default if frontswap is not configured and can only - * be enabled with the "selfballooning" kernel boot option; similarly + * be enabled with the "tmem.selfballooning=1" kernel boot option; similarly * selfballooning is enabled by default if frontswap is configured and - * can be disabled with the "noselfballooning" kernel boot option. Finally, + * can be disabled with the "tmem.selfballooning=0" kernel boot option. Finally, * when frontswap is configured,frontswap-selfshrinking can be disabled * with the "tmem.selfshrink=0" kernel boot option. * @@ -173,27 +173,6 @@ static void frontswap_selfshrink(void) frontswap_shrink(tgt_frontswap_pages); } -/* Disable with kernel boot option. */ -static bool use_selfballooning = true; - -static int __init xen_noselfballooning_setup(char *s) -{ - use_selfballooning = false; - return 1; -} - -__setup("noselfballooning", xen_noselfballooning_setup); -#else /* !CONFIG_FRONTSWAP */ -/* Enable with kernel boot option. */ -static bool use_selfballooning; - -static int __init xen_selfballooning_setup(char *s) -{ - use_selfballooning = true; - return 1; -} - -__setup("selfballooning", xen_selfballooning_setup); #endif /* CONFIG_FRONTSWAP */ #define MB2PAGES(mb) ((mb) << (20 - PAGE_SHIFT)) -- cgit v0.10.2 From 37d46e152e4c71cd772085912f1c7bf06839f739 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Tue, 14 May 2013 13:56:42 -0400 Subject: xen/tmem: Don't use self[ballooning|shrinking] if frontswap is off. There is no point. We would just squeeze the guest to put more and more pages in the swap disk without any purpose. The only time it makes sense to use the selfballooning and shrinking is when frontswap is being utilized. Signed-off-by: Konrad Rzeszutek Wilk diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 3de01ed..6e3b18a 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -3014,7 +3014,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. tmem.frontswap=0|1 [KNL, XEN] Default is on (1). Disable the usage of the frontswap - API to send swap pages to the hypervisor. + API to send swap pages to the hypervisor. If disabled + the selfballooning and selfshrinking are force disabled. tmem.selfballooning=0|1 [KNL, XEN] Default is on (1). Disable the driving of swap pages diff --git a/drivers/xen/tmem.c b/drivers/xen/tmem.c index c1df0ff..18e8bd8 100644 --- a/drivers/xen/tmem.c +++ b/drivers/xen/tmem.c @@ -403,6 +403,14 @@ static int xen_tmem_init(void) } #endif #ifdef CONFIG_XEN_SELFBALLOONING + /* + * There is no point of driving pages to the swap system if they + * aren't going anywhere in tmem universe. + */ + if (!frontswap) { + selfshrinking = false; + selfballooning = false; + } xen_selfballoon_init(selfballooning, selfshrinking); #endif return 0; diff --git a/drivers/xen/xen-selfballoon.c b/drivers/xen/xen-selfballoon.c index 5d637e2..f70984a8 100644 --- a/drivers/xen/xen-selfballoon.c +++ b/drivers/xen/xen-selfballoon.c @@ -53,15 +53,12 @@ * System configuration note: Selfballooning should not be enabled on * systems without a sufficiently large swap device configured; for best * results, it is recommended that total swap be increased by the size - * of the guest memory. Also, while technically not required to be - * configured, it is highly recommended that frontswap also be configured - * and enabled when selfballooning is running. So, selfballooning - * is disabled by default if frontswap is not configured and can only - * be enabled with the "tmem.selfballooning=1" kernel boot option; similarly - * selfballooning is enabled by default if frontswap is configured and - * can be disabled with the "tmem.selfballooning=0" kernel boot option. Finally, - * when frontswap is configured,frontswap-selfshrinking can be disabled - * with the "tmem.selfshrink=0" kernel boot option. + * of the guest memory. Note, that selfballooning should be disabled by default + * if frontswap is not configured. Similarly selfballooning should be enabled + * by default if frontswap is configured and can be disabled with the + * "tmem.selfballooning=0" kernel boot option. Finally, when frontswap is + * configured, frontswap-selfshrinking can be disabled with the + * "tmem.selfshrink=0" kernel boot option. * * Selfballooning is disallowed in domain0 and force-disabled. * -- cgit v0.10.2 From 2cde3935cf0e51ce5fd07609f1b770664db2d96b Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 10 May 2013 10:17:14 +0200 Subject: usb: gadget: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Acked-by: Greg Kroah-Hartman Signed-off-by: Wolfram Sang Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/bcm63xx_udc.c b/drivers/usb/gadget/bcm63xx_udc.c index 9780c57..fd24cb4 100644 --- a/drivers/usb/gadget/bcm63xx_udc.c +++ b/drivers/usb/gadget/bcm63xx_udc.c @@ -2334,21 +2334,11 @@ static int bcm63xx_udc_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "error finding USBD resource\n"); - return -ENXIO; - } - udc->usbd_regs = devm_ioremap_resource(dev, res); if (IS_ERR(udc->usbd_regs)) return PTR_ERR(udc->usbd_regs); res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!res) { - dev_err(dev, "error finding IUDMA resource\n"); - return -ENXIO; - } - udc->iudma_regs = devm_ioremap_resource(dev, res); if (IS_ERR(udc->iudma_regs)) return PTR_ERR(udc->iudma_regs); -- cgit v0.10.2 From 9d6ab420a9cb475fb99874f06d00df9c8259c973 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 10 May 2013 10:17:16 +0200 Subject: usb: phy: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Acked-by: Greg Kroah-Hartman Signed-off-by: Wolfram Sang Signed-off-by: Felipe Balbi diff --git a/drivers/usb/phy/phy-mv-u3d-usb.c b/drivers/usb/phy/phy-mv-u3d-usb.c index f7838a4..1568ea6 100644 --- a/drivers/usb/phy/phy-mv-u3d-usb.c +++ b/drivers/usb/phy/phy-mv-u3d-usb.c @@ -278,11 +278,6 @@ static int mv_u3d_phy_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "missing mem resource\n"); - return -ENODEV; - } - phy_base = devm_ioremap_resource(dev, res); if (IS_ERR(phy_base)) return PTR_ERR(phy_base); diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index 3b64277..763250b 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -130,11 +130,6 @@ static int mxs_phy_probe(struct platform_device *pdev) int ret; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "can't get device resources\n"); - return -ENOENT; - } - base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(base)) return PTR_ERR(base); diff --git a/drivers/usb/phy/phy-samsung-usb2.c b/drivers/usb/phy/phy-samsung-usb2.c index 45ffe03..9d5e273 100644 --- a/drivers/usb/phy/phy-samsung-usb2.c +++ b/drivers/usb/phy/phy-samsung-usb2.c @@ -363,11 +363,6 @@ static int samsung_usb2phy_probe(struct platform_device *pdev) int ret; phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!phy_mem) { - dev_err(dev, "%s: missing mem resource\n", __func__); - return -ENODEV; - } - phy_base = devm_ioremap_resource(dev, phy_mem); if (IS_ERR(phy_base)) return PTR_ERR(phy_base); diff --git a/drivers/usb/phy/phy-samsung-usb3.c b/drivers/usb/phy/phy-samsung-usb3.c index 133f3d0..5a9efcb 100644 --- a/drivers/usb/phy/phy-samsung-usb3.c +++ b/drivers/usb/phy/phy-samsung-usb3.c @@ -239,11 +239,6 @@ static int samsung_usb3phy_probe(struct platform_device *pdev) int ret; phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!phy_mem) { - dev_err(dev, "%s: missing mem resource\n", __func__); - return -ENODEV; - } - phy_base = devm_ioremap_resource(dev, phy_mem); if (IS_ERR(phy_base)) return PTR_ERR(phy_base); -- cgit v0.10.2 From 1abd8b3172b701ed626df4ebf09b7fe7f329888a Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Fri, 10 May 2013 15:15:08 +0530 Subject: usb: phy: Fix NULL pointer exception during usb_get_phy Upon initialisation (driver probe) a NULL pointer exception is triggered. This is due to lack of initialisation of device field in phy structure, which is used by phy framework in usb_get_phy(). Fix it by initialising the device field. Signed-off-by: Robert Jarzmik Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Felipe Balbi diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c index 97b9308..e771baf 100644 --- a/drivers/usb/phy/phy-fsl-usb.c +++ b/drivers/usb/phy/phy-fsl-usb.c @@ -799,6 +799,7 @@ static int fsl_otg_conf(struct platform_device *pdev) /* initialize the otg structure */ fsl_otg_tc->phy.label = DRIVER_DESC; + fsl_otg_tc->phy.dev = &pdev->dev; fsl_otg_tc->phy.set_power = fsl_otg_set_power; fsl_otg_tc->phy.otg->phy = &fsl_otg_tc->phy; diff --git a/drivers/usb/phy/phy-gpio-vbus-usb.c b/drivers/usb/phy/phy-gpio-vbus-usb.c index 1d32af2..8443335 100644 --- a/drivers/usb/phy/phy-gpio-vbus-usb.c +++ b/drivers/usb/phy/phy-gpio-vbus-usb.c @@ -266,6 +266,7 @@ static int __init gpio_vbus_probe(struct platform_device *pdev) platform_set_drvdata(pdev, gpio_vbus); gpio_vbus->dev = &pdev->dev; gpio_vbus->phy.label = "gpio-vbus"; + gpio_vbus->phy.dev = gpio_vbus->dev; gpio_vbus->phy.set_power = gpio_vbus_set_power; gpio_vbus->phy.set_suspend = gpio_vbus_set_suspend; gpio_vbus->phy.state = OTG_STATE_UNDEFINED; diff --git a/drivers/usb/phy/phy-isp1301.c b/drivers/usb/phy/phy-isp1301.c index 225ae6c..8a55b37 100644 --- a/drivers/usb/phy/phy-isp1301.c +++ b/drivers/usb/phy/phy-isp1301.c @@ -102,6 +102,7 @@ static int isp1301_probe(struct i2c_client *client, mutex_init(&isp->mutex); phy = &isp->phy; + phy->dev = &client->dev; phy->label = DRV_NAME; phy->init = isp1301_phy_init; phy->set_vbus = isp1301_phy_set_vbus; -- cgit v0.10.2 From 17d966a325a7ccfb5970839fb5b2ebb9e3909a6f Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Sat, 11 May 2013 21:14:00 +0900 Subject: usb: gadget: s3c-hsotg: pass 'struct usb_request *' to usb_gadget_unmap_request() 'struct usb_request *' should be passed to usb_gadget_unmap_request(), as the second argument; however, 'struct s3c_hsotg_req *' is used. Fixed build warnings as below: drivers/usb/gadget/s3c-hsotg.c: In function 's3c_hsotg_unmap_dma': drivers/usb/gadget/s3c-hsotg.c:440:2: warning: passing argument 2 of 'usb_gadget_unmap_request' from incompatible pointer type [enabled by default] include/linux/usb/gadget.h:961:13: note: expected 'struct usb_request *' but argument is of type 'struct s3c_hsotg_req *' drivers/usb/gadget/s3c-hsotg.c:434:22: warning: unused variable 'req' [-Wunused-variable] Signed-off-by: Jingoo Han Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index a3cdc32..af22f24 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -437,7 +437,7 @@ static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg, if (hs_req->req.length == 0) return; - usb_gadget_unmap_request(&hsotg->gadget, hs_req, hs_ep->dir_in); + usb_gadget_unmap_request(&hsotg->gadget, req, hs_ep->dir_in); } /** -- cgit v0.10.2 From b990da15f4ffaed11adfb55c975b2c6b8f20f222 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Mon, 13 May 2013 10:43:26 +0200 Subject: usb: phy: remove CONFIG_USB_OTG_UTILS once more The Kconfig symbol USB_OTG_UTILS was removed in the v3.10 merge window, in commit fd89149875 ("usb: phy: remove CONFIG_USB_OTG_UTILS"). But that symbol popped up again in a few places. Remove it there too. Acked-by: Paul Zimmerman Signed-off-by: Paul Bolle Signed-off-by: Felipe Balbi diff --git a/drivers/staging/dwc2/Kconfig b/drivers/staging/dwc2/Kconfig index f0b4739..bbee177 100644 --- a/drivers/staging/dwc2/Kconfig +++ b/drivers/staging/dwc2/Kconfig @@ -2,7 +2,6 @@ config USB_DWC2 tristate "DesignWare USB2 DRD Core Support" depends on USB depends on VIRT_TO_BUS - select USB_OTG_UTILS help Say Y or M here if your system has a Dual Role HighSpeed USB controller based on the DesignWare HSOTG IP Core. diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 83300d9..f41aa0d 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -146,7 +146,6 @@ config USB_LPC32XX depends on ARCH_LPC32XX depends on USB_PHY select USB_ISP1301 - select USB_OTG_UTILS help This option selects the USB device controller in the LPC32xx SoC. diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 371d0e7..5053cea 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -139,7 +139,6 @@ config USB_ISP1301 tristate "NXP ISP1301 USB transceiver support" depends on USB || USB_GADGET depends on I2C - select USB_OTG_UTILS help Say Y here to add support for the NXP ISP1301 USB transceiver driver. This chip is typically used as USB transceiver for USB host, gadget -- cgit v0.10.2 From 4e0aa635d069478e73ad95ff21fd4ae144faa189 Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Wed, 15 May 2013 15:03:14 +0200 Subject: usb: otg: mxs-phy: add missing type to usb_phy The mxs-phy is missing the phy.type property, why the usb_get_phy helper function won't be able to find it. This patch adds this missing property. Signed-off-by: Michael Grzeschik Signed-off-by: Felipe Balbi diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index 763250b..bd601c5 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -155,6 +155,7 @@ static int mxs_phy_probe(struct platform_device *pdev) mxs_phy->phy.set_suspend = mxs_phy_suspend; mxs_phy->phy.notify_connect = mxs_phy_on_connect; mxs_phy->phy.notify_disconnect = mxs_phy_on_disconnect; + mxs_phy->phy.type = USB_PHY_TYPE_USB2; ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier); -- cgit v0.10.2 From ba54229db65b161d46df449638a1a386444681b0 Mon Sep 17 00:00:00 2001 From: Peter Oberparleiter Date: Wed, 15 May 2013 13:43:29 +0200 Subject: s390/cio: add channel ID sysfs attribute Add new attributes "chid" and "chid_external" to the channel-path sysfs directory. These attributes contain information related to the channel-ID of the channel-path. Reviewed-by: Sebastian Ott Signed-off-by: Peter Oberparleiter Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/cio/chp.c b/drivers/s390/cio/chp.c index 21fabc6..6c440d4 100644 --- a/drivers/s390/cio/chp.c +++ b/drivers/s390/cio/chp.c @@ -352,12 +352,48 @@ static ssize_t chp_shared_show(struct device *dev, static DEVICE_ATTR(shared, 0444, chp_shared_show, NULL); +static ssize_t chp_chid_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct channel_path *chp = to_channelpath(dev); + ssize_t rc; + + mutex_lock(&chp->lock); + if (chp->desc_fmt1.flags & 0x10) + rc = sprintf(buf, "%04x\n", chp->desc_fmt1.chid); + else + rc = 0; + mutex_unlock(&chp->lock); + + return rc; +} +static DEVICE_ATTR(chid, 0444, chp_chid_show, NULL); + +static ssize_t chp_chid_external_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct channel_path *chp = to_channelpath(dev); + ssize_t rc; + + mutex_lock(&chp->lock); + if (chp->desc_fmt1.flags & 0x10) + rc = sprintf(buf, "%x\n", chp->desc_fmt1.flags & 0x8 ? 1 : 0); + else + rc = 0; + mutex_unlock(&chp->lock); + + return rc; +} +static DEVICE_ATTR(chid_external, 0444, chp_chid_external_show, NULL); + static struct attribute *chp_attrs[] = { &dev_attr_status.attr, &dev_attr_configure.attr, &dev_attr_type.attr, &dev_attr_cmg.attr, &dev_attr_shared.attr, + &dev_attr_chid.attr, + &dev_attr_chid_external.attr, NULL, }; static struct attribute_group chp_attr_group = { diff --git a/drivers/s390/cio/chsc.h b/drivers/s390/cio/chsc.h index 349d5fc..e7ef2a6 100644 --- a/drivers/s390/cio/chsc.h +++ b/drivers/s390/cio/chsc.h @@ -43,7 +43,9 @@ struct channel_path_desc_fmt1 { u8 chpid; u32:24; u8 chpp; - u32 unused[3]; + u32 unused[2]; + u16 chid; + u32:16; u16 mdc; u16:13; u8 r:1; -- cgit v0.10.2 From 615ee5443ff9bedd356dc6865f3e9c276ce434ea Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Tue, 26 Mar 2013 11:35:16 -0400 Subject: rcu: Don't allocate bootmem from rcu_init() When rcu_init() is called we already have slab working, allocating bootmem at that point results in warnings and an allocation from slab. This commit therefore changes alloc_bootmem_cpumask_var() to alloc_cpumask_var() in rcu_bootup_announce_oddness(), which is called from rcu_init(). Signed-off-by: Sasha Levin Signed-off-by: Paul E. McKenney Reviewed-by: Josh Triplett Tested-by: Robin Holt [paulmck: convert to zalloc_cpumask_var(), as suggested by Yinghai Lu.] diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h index 6d939a6..3db5a37 100644 --- a/kernel/rcutree_plugin.h +++ b/kernel/rcutree_plugin.h @@ -88,7 +88,7 @@ static void __init rcu_bootup_announce_oddness(void) #ifdef CONFIG_RCU_NOCB_CPU #ifndef CONFIG_RCU_NOCB_CPU_NONE if (!have_rcu_nocb_mask) { - alloc_bootmem_cpumask_var(&rcu_nocb_mask); + zalloc_cpumask_var(&rcu_nocb_mask, GFP_KERNEL); have_rcu_nocb_mask = true; } #ifdef CONFIG_RCU_NOCB_CPU_ZERO -- cgit v0.10.2 From e4f47e3675e6f1f40906b785b934ce963e9f2eb3 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 8 May 2013 11:18:05 -0400 Subject: USB: xHCI: override bogus bulk wMaxPacketSize values MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch shortens the logic in xhci_endpoint_init() by moving common calculations involving max_packet and max_burst outside the switch statement, rather than repeating the same code in multiple case-specific statements. It also replaces two usages of max_packet which were clearly intended to be max_burst all along. More importantly, it compensates for a common bug in high-speed bulk endpoint descriptors. In many devices there is a bulk endpoint having a wMaxPacketSize value smaller than 512, which is forbidden by the USB spec. Some xHCI controllers can't handle this and refuse to accept the endpoint. This patch changes the max_packet value to 512, which allows the controller to use the endpoint properly. In practice the bogus maxpacket size doesn't matter, because none of the transfers sent via these endpoints are longer than the maxpacket value anyway. Signed-off-by: Alan Stern Reported-and-tested-by: "Aurélien Leblond" CC: Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 965b539..2cfc465 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1423,15 +1423,17 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, ep_ctx->ep_info2 |= cpu_to_le32(xhci_get_endpoint_type(udev, ep)); /* Set the max packet size and max burst */ + max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc)); + max_burst = 0; switch (udev->speed) { case USB_SPEED_SUPER: - max_packet = usb_endpoint_maxp(&ep->desc); - ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet)); /* dig out max burst from ep companion desc */ - max_packet = ep->ss_ep_comp.bMaxBurst; - ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_packet)); + max_burst = ep->ss_ep_comp.bMaxBurst; break; case USB_SPEED_HIGH: + /* Some devices get this wrong */ + if (usb_endpoint_xfer_bulk(&ep->desc)) + max_packet = 512; /* bits 11:12 specify the number of additional transaction * opportunities per microframe (USB 2.0, section 9.6.6) */ @@ -1439,17 +1441,16 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, usb_endpoint_xfer_int(&ep->desc)) { max_burst = (usb_endpoint_maxp(&ep->desc) & 0x1800) >> 11; - ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_burst)); } - /* Fall through */ + break; case USB_SPEED_FULL: case USB_SPEED_LOW: - max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc)); - ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet)); break; default: BUG(); } + ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet) | + MAX_BURST(max_burst)); max_esit_payload = xhci_get_max_esit_payload(xhci, udev, ep); ep_ctx->tx_info = cpu_to_le32(MAX_ESIT_PAYLOAD_FOR_EP(max_esit_payload)); -- cgit v0.10.2 From ccd9509a0b942f7a139f1adb741a746ef0220911 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 14 May 2013 13:54:12 -0400 Subject: USB: fix Kconfig logic for USB_UHCI_HCD The Kconfig settings for uhci-hcd are too permissive; they allow the driver to be built without any bus-glue modules configured (USB_UHCI_HCD enabled, PCI disabled, SPARC_LEON disabled, ARCH_VT8500 enabled, and USB_UHCI_PLATFORM disabled). This patch fixes the problem by rearranging the dependencies. Now the platform-dependent config options don't depend on USB_UHCI_HCD; instead it depends on them. Furthermore, there is no user-selectable choice as to which glue modules will be built. If USB_UHCI_HCD is enabled then all applicable bus glues will be built. Signed-off-by: Alan Stern CC: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index de94f26..344d5e2 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -507,7 +507,7 @@ endif # USB_OHCI_HCD config USB_UHCI_HCD tristate "UHCI HCD (most Intel and VIA) support" - depends on PCI || SPARC_LEON || ARCH_VT8500 + depends on PCI || USB_UHCI_SUPPORT_NON_PCI_HC ---help--- The Universal Host Controller Interface is a standard by Intel for accessing the USB hardware in the PC (which is also called the USB @@ -524,26 +524,19 @@ config USB_UHCI_HCD config USB_UHCI_SUPPORT_NON_PCI_HC bool - depends on USB_UHCI_HCD - default y if (SPARC_LEON || ARCH_VT8500) + default y if (SPARC_LEON || USB_UHCI_PLATFORM) config USB_UHCI_PLATFORM - bool "Generic UHCI Platform Driver support" - depends on USB_UHCI_SUPPORT_NON_PCI_HC + bool default y if ARCH_VT8500 - ---help--- - Enable support for generic UHCI platform devices that require no - additional configuration. config USB_UHCI_BIG_ENDIAN_MMIO bool - depends on USB_UHCI_SUPPORT_NON_PCI_HC && SPARC_LEON - default y + default y if SPARC_LEON config USB_UHCI_BIG_ENDIAN_DESC bool - depends on USB_UHCI_SUPPORT_NON_PCI_HC && SPARC_LEON - default y + default y if SPARC_LEON config USB_FHCI_HCD tristate "Freescale QE USB Host Controller support" -- cgit v0.10.2 From 997ff893603c6455da4c5e26ba1d0f81adfecdfc Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 14 May 2013 13:55:29 -0400 Subject: USB: UHCI: fix for suspend of virtual HP controller HP's virtual UHCI host controller takes a long time to suspend (several hundred microseconds), even when no devices are attached. This provokes a warning message from uhci-hcd in the auto-stop case. To prevent this from happening, this patch adds a test to avoid performing an auto-stop when the wait_for_hp quirk flag is set. The controller will still suspend through the normal runtime PM mechanism. And since that pathway includes a 1-ms delay, the slowness of the virtual hardware won't matter. Signed-off-by: Alan Stern Reported-and-tested-by: ZhenHua CC: Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c index f87bee6..9189bc9 100644 --- a/drivers/usb/host/uhci-hub.c +++ b/drivers/usb/host/uhci-hub.c @@ -225,7 +225,8 @@ static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf) /* auto-stop if nothing connected for 1 second */ if (any_ports_active(uhci)) uhci->rh_state = UHCI_RH_RUNNING; - else if (time_after_eq(jiffies, uhci->auto_stop_time)) + else if (time_after_eq(jiffies, uhci->auto_stop_time) && + !uhci->wait_for_hp) suspend_rh(uhci, UHCI_RH_AUTO_STOPPED); break; -- cgit v0.10.2 From e1944017839d7dfbf7329fac4bdec8b4050edf5e Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 14 May 2013 13:57:19 -0400 Subject: USB: fix latency in uhci-hcd and ohci-hcd Commits c44b225077bb1fb25ed5cd5c4f226897b91bedd4 (UHCI: implement new semantics for URB_ISO_ASAP) and 6a41b4d3fe8cd4cc95181516fc6fba7b1747a27c (OHCI: implement new semantics for URB_ISO_ASAP) increased the latency for isochronous URBs in uhci-hcd and ohci-hcd respectively to 2 milliseconds, in an attempt to avoid underruns. It turns out that not only was this unnecessary -- 1-ms latency works okay -- it also causes problems with certain application loads such as real-time audio. This patch changes the latency for both drivers back to 1 ms. This should be applied to -stable kernels going back to 3.8. Signed-off-by: Alan Stern Reported-and-tested-by: Joe Rayhawk CC: Clemens Ladisch CC: Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 9e6de95..df1af0b 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -233,7 +233,7 @@ static int ohci_urb_enqueue ( urb->start_frame = frame; } } else if (ed->type == PIPE_ISOCHRONOUS) { - u16 next = ohci_frame_no(ohci) + 2; + u16 next = ohci_frame_no(ohci) + 1; u16 frame = ed->last_iso + ed->interval; /* Behind the scheduling threshold? */ diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index f0976d8..041c6dd 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -1287,7 +1287,7 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb, return -EINVAL; /* Can't change the period */ } else { - next = uhci->frame_number + 2; + next = uhci->frame_number + 1; /* Find the next unused frame */ if (list_empty(&qh->queue)) { -- cgit v0.10.2 From 815fa7b917614261748d1ecd9600ff27f99508e5 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 14 May 2013 13:57:51 -0400 Subject: USB: OHCI: fix logic for scheduling isochronous URBs The isochronous scheduling logic in ohci-hcd has a bug. The calculation for skipping TDs that are too late should be carried out only in the !URB_ISO_ASAP case. When URB_ISO_ASAP is set, the URB is pushed back so that none of the TDs are too late, which would cause the calculation to overflow. The patch also fixes the calculation to avoid overflow in the case where the frame value wraps around. This should be applied to -stable kernels going back to 3.8. Signed-off-by: Alan Stern CC: Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index df1af0b..fc627fd 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -240,7 +240,7 @@ static int ohci_urb_enqueue ( if (unlikely(tick_before(frame, next))) { /* USB_ISO_ASAP: Round up to the first available slot */ - if (urb->transfer_flags & URB_ISO_ASAP) + if (urb->transfer_flags & URB_ISO_ASAP) { frame += (next - frame + ed->interval - 1) & -ed->interval; @@ -248,21 +248,25 @@ static int ohci_urb_enqueue ( * Not ASAP: Use the next slot in the stream. If * the entire URB falls before the threshold, fail. */ - else if (tick_before(frame + ed->interval * + } else { + if (tick_before(frame + ed->interval * (urb->number_of_packets - 1), next)) { - retval = -EXDEV; - usb_hcd_unlink_urb_from_ep(hcd, urb); - goto fail; - } + retval = -EXDEV; + usb_hcd_unlink_urb_from_ep(hcd, urb); + goto fail; + } - /* - * Some OHCI hardware doesn't handle late TDs - * correctly. After retiring them it proceeds to - * the next ED instead of the next TD. Therefore - * we have to omit the late TDs entirely. - */ - urb_priv->td_cnt = DIV_ROUND_UP(next - frame, - ed->interval); + /* + * Some OHCI hardware doesn't handle late TDs + * correctly. After retiring them it proceeds + * to the next ED instead of the next TD. + * Therefore we have to omit the late TDs + * entirely. + */ + urb_priv->td_cnt = DIV_ROUND_UP( + (u16) (next - frame), + ed->interval); + } } urb->start_frame = frame; } -- cgit v0.10.2 From 98f541c6e390d48643047e0924da8ccc10bb1598 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 1 May 2013 12:13:54 -0400 Subject: USB: remove remaining instances of USB_SUSPEND Commit 84ebc10294a3d7be4c66f51070b7aedbaa24de9b (USB: remove CONFIG_USB_SUSPEND option) failed to remove all of the usages of USB_SUSPEND throughout the kernel. This patch (as1677) removes the remaining instances of that symbol. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 7e0ebb6..9940f7b 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -199,7 +199,6 @@ CONFIG_USB_PHY=y CONFIG_USB_DEBUG=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_SUSPEND=y CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index c1ef64b..435d69b 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -204,7 +204,6 @@ CONFIG_USB=y CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DEVICEFS=y -CONFIG_USB_SUSPEND=y CONFIG_USB_MON=y CONFIG_USB_WDM=y CONFIG_USB_STORAGE=y diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index face9d2..bac26b9 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -228,7 +228,6 @@ CONFIG_HIDRAW=y CONFIG_USB_HID=y CONFIG_USB_SUPPORT=y CONFIG_USB=y -CONFIG_USB_SUSPEND=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y diff --git a/arch/mips/configs/db1235_defconfig b/arch/mips/configs/db1235_defconfig index 14752dd..e2b4ad5 100644 --- a/arch/mips/configs/db1235_defconfig +++ b/arch/mips/configs/db1235_defconfig @@ -344,7 +344,6 @@ CONFIG_UHID=y CONFIG_USB_HIDDEV=y CONFIG_USB=y CONFIG_USB_DYNAMIC_MINORS=y -CONFIG_USB_SUSPEND=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_HCD_PLATFORM=y CONFIG_USB_EHCI_ROOT_HUB_TT=y diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig index b6acd2f..343bebc 100644 --- a/arch/mips/configs/lemote2f_defconfig +++ b/arch/mips/configs/lemote2f_defconfig @@ -300,7 +300,6 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_DYNAMIC_MINORS=y -CONFIG_USB_SUSPEND=y CONFIG_USB_OTG_WHITELIST=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig index f791962..139a830 100644 --- a/arch/powerpc/configs/ps3_defconfig +++ b/arch/powerpc/configs/ps3_defconfig @@ -136,7 +136,6 @@ CONFIG_HID_SMARTJOYPLUS=m CONFIG_USB_HIDDEV=y CONFIG_USB=m CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_SUSPEND=y CONFIG_USB_MON=m CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_HCD_PPC_OF is not set diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index f95cb03..06ee82f 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1477,7 +1477,7 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) /* usbnet already took usb runtime pm, so have to enable the feature * for usb interface, otherwise usb_autopm_get_interface may return - * failure if USB_SUSPEND(RUNTIME_PM) is enabled. + * failure if RUNTIME_PM is enabled. */ if (!driver->supports_autosuspend) { driver->supports_autosuspend = 1; diff --git a/drivers/staging/gdm72xx/Kconfig b/drivers/staging/gdm72xx/Kconfig index 3c18efe..6905913 100644 --- a/drivers/staging/gdm72xx/Kconfig +++ b/drivers/staging/gdm72xx/Kconfig @@ -39,7 +39,7 @@ if WIMAX_GDM72XX_USB config WIMAX_GDM72XX_USB_PM bool "Enable power managerment support" - depends on USB_SUSPEND + depends on PM_RUNTIME endif # WIMAX_GDM72XX_USB diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index 8772b36..db535b0 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -51,7 +51,7 @@ config USB_DYNAMIC_MINORS config USB_OTG bool "OTG support" - depends on USB_SUSPEND + depends on PM_RUNTIME default n help The most notable feature of USB OTG is support for a diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index 125e261..2facee5 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -1739,7 +1739,7 @@ static int isp1760_hub_status_data(struct usb_hcd *hcd, char *buf) int retval = 1; unsigned long flags; - /* if !USB_SUSPEND, root hub timers won't get shut down ... */ + /* if !PM_RUNTIME, root hub timers won't get shut down ... */ if (!HC_IS_RUNNING(hcd->state)) return 0; diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index 4f0f033..0f401db 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -3084,7 +3084,7 @@ static int oxu_hub_status_data(struct usb_hcd *hcd, char *buf) int ports, i, retval = 1; unsigned long flags; - /* if !USB_SUSPEND, root hub timers won't get shut down ... */ + /* if !PM_RUNTIME, root hub timers won't get shut down ... */ if (!HC_IS_RUNNING(hcd->state)) return 0; diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index ad4483e..b2ec7fe 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -22,7 +22,7 @@ * and usb-storage. * * TODO: - * - usb suspend/resume triggered by sl811 (with USB_SUSPEND) + * - usb suspend/resume triggered by sl811 (with PM_RUNTIME) * - various issues noted in the code * - performance work; use both register banks; ... * - use urb->iso_frame_desc[] with ISO transfers diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 5053cea..7ef3eb8 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -25,7 +25,7 @@ config AB8500_USB config FSL_USB2_OTG bool "Freescale USB OTG Transceiver Driver" - depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_SUSPEND + depends on USB_EHCI_FSL && USB_FSL_USB2 && PM_RUNTIME select USB_OTG help Enable this to support Freescale USB OTG transceiver. @@ -161,7 +161,7 @@ config USB_MSM_OTG config USB_MV_OTG tristate "Marvell USB OTG support" - depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND + depends on USB_EHCI_MV && USB_MV_UDC && PM_RUNTIME select USB_OTG help Say Y here if you want to build Marvell USB OTG transciever -- cgit v0.10.2 From 60705c89460fdc7227f2d153b68b3f34814738a4 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Red Hat)" Date: Tue, 14 May 2013 15:40:48 -0400 Subject: tracing: Fix leaks of filter preds Special preds are created when folding a series of preds that can be done in serial. These are allocated in an ops field of the pred structure. But they were never freed, causing memory leaks. This was discovered using the kmemleak checker: unreferenced object 0xffff8800797fd5e0 (size 32): comm "swapper/0", pid 1, jiffies 4294690605 (age 104.608s) hex dump (first 32 bytes): 00 00 01 00 03 00 05 00 07 00 09 00 0b 00 0d 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [] kmemleak_alloc+0x73/0x98 [] kmemleak_alloc_recursive.constprop.42+0x16/0x18 [] __kmalloc+0xd7/0x125 [] kcalloc.constprop.24+0x2d/0x2f [] fold_pred_tree_cb+0xa9/0xf4 [] walk_pred_tree+0x47/0xcc [] replace_preds.isra.20+0x6f8/0x72f [] create_filter+0x4e/0x8b [] ftrace_test_event_filter+0x5a/0x155 [] do_one_initcall+0xa0/0x137 [] kernel_init_freeable+0x14d/0x1dc [] kernel_init+0xe/0xdb [] ret_from_fork+0x7c/0xb0 [] 0xffffffffffffffff Cc: Tom Zanussi Cc: stable@vger.kernel.org # 2.6.39+ Signed-off-by: Steven Rostedt diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c index a636117..e1b653f 100644 --- a/kernel/trace/trace_events_filter.c +++ b/kernel/trace/trace_events_filter.c @@ -750,7 +750,11 @@ static int filter_set_pred(struct event_filter *filter, static void __free_preds(struct event_filter *filter) { + int i; + if (filter->preds) { + for (i = 0; i < filter->n_preds; i++) + kfree(filter->preds[i].ops); kfree(filter->preds); filter->preds = NULL; } -- cgit v0.10.2 From d36ccb9cec22a09a12d9ef8234d634f840d7ae4b Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 15 May 2013 10:46:33 -0700 Subject: SUNRPC: Fix a bug in gss_create_upcall If wait_event_interruptible_timeout() is successful, it returns the number of seconds remaining until the timeout. In that case, we should be retrying the upcall. Signed-off-by: Trond Myklebust diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index 7da6b45..f17f3c5 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -563,11 +563,12 @@ gss_create_upcall(struct gss_auth *gss_auth, struct gss_cred *gss_cred) struct rpc_cred *cred = &gss_cred->gc_base; struct gss_upcall_msg *gss_msg; DEFINE_WAIT(wait); - int err = 0; + int err; dprintk("RPC: %s for uid %u\n", __func__, from_kuid(&init_user_ns, cred->cr_uid)); retry: + err = 0; gss_msg = gss_setup_upcall(gss_auth->client, gss_auth, cred); if (PTR_ERR(gss_msg) == -EAGAIN) { err = wait_event_interruptible_timeout(pipe_version_waitqueue, @@ -576,7 +577,7 @@ retry: warn_gssd(); err = -EACCES; } - if (err) + if (err < 0) goto out; goto retry; } -- cgit v0.10.2 From c02c7e65d9b13670e34bc523744cf4f6e99c198a Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Mon, 13 May 2013 20:58:34 +0900 Subject: tracing/kprobes: Use rcu_dereference_raw for tp->files Use rcu_dereference_raw() for accessing tp->files. Because the write-side uses rcu_assign_pointer() for memory barrier, the read-side also has to use rcu_dereference_raw() with read memory barrier. Link: http://lkml.kernel.org/r/20130513115834.6545.17022.stgit@mhiramat-M0-7522 Cc: Srikar Dronamraju Cc: Oleg Nesterov Cc: Tom Zanussi Cc: Frederic Weisbecker Cc: Ingo Molnar Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c index 636d45f..0a3d8d5 100644 --- a/kernel/trace/trace_kprobe.c +++ b/kernel/trace/trace_kprobe.c @@ -185,9 +185,14 @@ static struct trace_probe *find_trace_probe(const char *event, static int trace_probe_nr_files(struct trace_probe *tp) { - struct ftrace_event_file **file = tp->files; + struct ftrace_event_file **file; int ret = 0; + /* + * Since all tp->files updater is protected by probe_enable_lock, + * we don't need to lock an rcu_read_lock. + */ + file = rcu_dereference_raw(tp->files); if (file) while (*(file++)) ret++; @@ -209,9 +214,10 @@ enable_trace_probe(struct trace_probe *tp, struct ftrace_event_file *file) mutex_lock(&probe_enable_lock); if (file) { - struct ftrace_event_file **new, **old = tp->files; + struct ftrace_event_file **new, **old; int n = trace_probe_nr_files(tp); + old = rcu_dereference_raw(tp->files); /* 1 is for new one and 1 is for stopper */ new = kzalloc((n + 2) * sizeof(struct ftrace_event_file *), GFP_KERNEL); @@ -251,11 +257,17 @@ enable_trace_probe(struct trace_probe *tp, struct ftrace_event_file *file) static int trace_probe_file_index(struct trace_probe *tp, struct ftrace_event_file *file) { + struct ftrace_event_file **files; int i; - if (tp->files) { - for (i = 0; tp->files[i]; i++) - if (tp->files[i] == file) + /* + * Since all tp->files updater is protected by probe_enable_lock, + * we don't need to lock an rcu_read_lock. + */ + files = rcu_dereference_raw(tp->files); + if (files) { + for (i = 0; files[i]; i++) + if (files[i] == file) return i; } @@ -274,10 +286,11 @@ disable_trace_probe(struct trace_probe *tp, struct ftrace_event_file *file) mutex_lock(&probe_enable_lock); if (file) { - struct ftrace_event_file **new, **old = tp->files; + struct ftrace_event_file **new, **old; int n = trace_probe_nr_files(tp); int i, j; + old = rcu_dereference_raw(tp->files); if (n == 0 || trace_probe_file_index(tp, file) < 0) { ret = -EINVAL; goto out_unlock; @@ -872,9 +885,16 @@ __kprobe_trace_func(struct trace_probe *tp, struct pt_regs *regs, static __kprobes void kprobe_trace_func(struct trace_probe *tp, struct pt_regs *regs) { - struct ftrace_event_file **file = tp->files; + /* + * Note: preempt is already disabled around the kprobe handler. + * However, we still need an smp_read_barrier_depends() corresponding + * to smp_wmb() in rcu_assign_pointer() to access the pointer. + */ + struct ftrace_event_file **file = rcu_dereference_raw(tp->files); + + if (unlikely(!file)) + return; - /* Note: preempt is already disabled around the kprobe handler */ while (*file) { __kprobe_trace_func(tp, regs, *file); file++; @@ -925,9 +945,16 @@ static __kprobes void kretprobe_trace_func(struct trace_probe *tp, struct kretprobe_instance *ri, struct pt_regs *regs) { - struct ftrace_event_file **file = tp->files; + /* + * Note: preempt is already disabled around the kprobe handler. + * However, we still need an smp_read_barrier_depends() corresponding + * to smp_wmb() in rcu_assign_pointer() to access the pointer. + */ + struct ftrace_event_file **file = rcu_dereference_raw(tp->files); + + if (unlikely(!file)) + return; - /* Note: preempt is already disabled around the kprobe handler */ while (*file) { __kretprobe_trace_func(tp, ri, regs, *file); file++; -- cgit v0.10.2 From 3d1fc7b0880c4db612a3d3211a808659e28af588 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Mon, 13 May 2013 20:58:37 +0900 Subject: tracing/kprobes: Fix a sparse warning for incorrect type in assignment Fix a sparse warning about the rcu operated pointer is defined without __rcu address space. Link: http://lkml.kernel.org/r/20130513115837.6545.23322.stgit@mhiramat-M0-7522 Cc: Srikar Dronamraju Cc: Oleg Nesterov Cc: Tom Zanussi Cc: Frederic Weisbecker Cc: Ingo Molnar Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c index 0a3d8d5..81c5109 100644 --- a/kernel/trace/trace_kprobe.c +++ b/kernel/trace/trace_kprobe.c @@ -35,7 +35,7 @@ struct trace_probe { const char *symbol; /* symbol name */ struct ftrace_event_class class; struct ftrace_event_call call; - struct ftrace_event_file **files; + struct ftrace_event_file * __rcu *files; ssize_t size; /* trace entry size */ unsigned int nr_args; struct probe_arg args[]; -- cgit v0.10.2 From b62fdd97fcae17e483b005bafd13fadbd9840672 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Mon, 13 May 2013 20:58:39 +0900 Subject: tracing/kprobes: Make print_*probe_event static According to sparse warning, print_*probe_event static because those functions are not directly called from outside. Link: http://lkml.kernel.org/r/20130513115839.6545.83067.stgit@mhiramat-M0-7522 Cc: Srikar Dronamraju Cc: Oleg Nesterov Cc: Tom Zanussi Cc: Frederic Weisbecker Cc: Ingo Molnar Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c index 81c5109..9f46e98 100644 --- a/kernel/trace/trace_kprobe.c +++ b/kernel/trace/trace_kprobe.c @@ -962,7 +962,7 @@ kretprobe_trace_func(struct trace_probe *tp, struct kretprobe_instance *ri, } /* Event entry printers */ -enum print_line_t +static enum print_line_t print_kprobe_event(struct trace_iterator *iter, int flags, struct trace_event *event) { @@ -998,7 +998,7 @@ partial: return TRACE_TYPE_PARTIAL_LINE; } -enum print_line_t +static enum print_line_t print_kretprobe_event(struct trace_iterator *iter, int flags, struct trace_event *event) { -- cgit v0.10.2 From 186f27ff9f9ec5c110739ced88ce9f8fca053882 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Tue, 22 Jan 2013 11:35:40 -0700 Subject: NTB: variable dereferenced before check Correct instances of variable dereferencing before checking its value on the functions exported to the client drivers. Also, add sanity checks for all exported functions. Reported-by: Dan Carpenter Signed-off-by: Jon Mason diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c index e0bdfd7..74c5812 100644 --- a/drivers/ntb/ntb_transport.c +++ b/drivers/ntb/ntb_transport.c @@ -1210,12 +1210,14 @@ EXPORT_SYMBOL_GPL(ntb_transport_create_queue); */ void ntb_transport_free_queue(struct ntb_transport_qp *qp) { - struct pci_dev *pdev = ntb_query_pdev(qp->ndev); + struct pci_dev *pdev; struct ntb_queue_entry *entry; if (!qp) return; + pdev = ntb_query_pdev(qp->ndev); + cancel_delayed_work_sync(&qp->link_work); ntb_unregister_db_callback(qp->ndev, qp->qp_num); @@ -1371,12 +1373,13 @@ EXPORT_SYMBOL_GPL(ntb_transport_link_up); */ void ntb_transport_link_down(struct ntb_transport_qp *qp) { - struct pci_dev *pdev = ntb_query_pdev(qp->ndev); + struct pci_dev *pdev; int rc, val; if (!qp) return; + pdev = ntb_query_pdev(qp->ndev); qp->client_ready = NTB_LINK_DOWN; rc = ntb_read_local_spad(qp->ndev, QP_LINKS, &val); @@ -1408,6 +1411,9 @@ EXPORT_SYMBOL_GPL(ntb_transport_link_down); */ bool ntb_transport_link_query(struct ntb_transport_qp *qp) { + if (!qp) + return false; + return qp->qp_link == NTB_LINK_UP; } EXPORT_SYMBOL_GPL(ntb_transport_link_query); @@ -1422,6 +1428,9 @@ EXPORT_SYMBOL_GPL(ntb_transport_link_query); */ unsigned char ntb_transport_qp_num(struct ntb_transport_qp *qp) { + if (!qp) + return 0; + return qp->qp_num; } EXPORT_SYMBOL_GPL(ntb_transport_qp_num); @@ -1436,6 +1445,9 @@ EXPORT_SYMBOL_GPL(ntb_transport_qp_num); */ unsigned int ntb_transport_max_size(struct ntb_transport_qp *qp) { + if (!qp) + return 0; + return qp->tx_max_frame - sizeof(struct ntb_payload_header); } EXPORT_SYMBOL_GPL(ntb_transport_max_size); -- cgit v0.10.2 From ad3e2751e7c546ae678be1f8d86e898506b42cef Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 22 Jan 2013 10:19:14 +0300 Subject: ntb: off by one sanity checks These tests are off by one. If "mw" is equal to NTB_NUM_MW then we would go beyond the end of the ndev->mw[] array. Signed-off-by: Dan Carpenter Signed-off-by: Jon Mason diff --git a/drivers/ntb/ntb_hw.c b/drivers/ntb/ntb_hw.c index f802e7c..195cc51 100644 --- a/drivers/ntb/ntb_hw.c +++ b/drivers/ntb/ntb_hw.c @@ -345,7 +345,7 @@ int ntb_read_remote_spad(struct ntb_device *ndev, unsigned int idx, u32 *val) */ void __iomem *ntb_get_mw_vbase(struct ntb_device *ndev, unsigned int mw) { - if (mw > NTB_NUM_MW) + if (mw >= NTB_NUM_MW) return NULL; return ndev->mw[mw].vbase; @@ -362,7 +362,7 @@ void __iomem *ntb_get_mw_vbase(struct ntb_device *ndev, unsigned int mw) */ resource_size_t ntb_get_mw_size(struct ntb_device *ndev, unsigned int mw) { - if (mw > NTB_NUM_MW) + if (mw >= NTB_NUM_MW) return 0; return ndev->mw[mw].bar_sz; @@ -380,7 +380,7 @@ resource_size_t ntb_get_mw_size(struct ntb_device *ndev, unsigned int mw) */ void ntb_set_mw_addr(struct ntb_device *ndev, unsigned int mw, u64 addr) { - if (mw > NTB_NUM_MW) + if (mw >= NTB_NUM_MW) return; dev_dbg(&ndev->pdev->dev, "Writing addr %Lx to BAR %d\n", addr, -- cgit v0.10.2 From cc0f868d8adef7bdc12cda132654870086d766bc Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 23 Jan 2013 22:26:05 +0300 Subject: NTB: fix pointer math issues ->remote_rx_info and ->rx_info are struct ntb_rx_info pointers. If we add sizeof(struct ntb_rx_info) then it goes too far. Signed-off-by: Dan Carpenter Signed-off-by: Jon Mason diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c index 74c5812..00f5e80 100644 --- a/drivers/ntb/ntb_transport.c +++ b/drivers/ntb/ntb_transport.c @@ -486,7 +486,7 @@ static void ntb_transport_setup_qp_mw(struct ntb_transport *nt, (qp_num / NTB_NUM_MW * rx_size); rx_size -= sizeof(struct ntb_rx_info); - qp->rx_buff = qp->remote_rx_info + sizeof(struct ntb_rx_info); + qp->rx_buff = qp->remote_rx_info + 1; qp->rx_max_frame = min(transport_mtu, rx_size); qp->rx_max_entry = rx_size / qp->rx_max_frame; qp->rx_index = 0; @@ -780,7 +780,7 @@ static void ntb_transport_init_queue(struct ntb_transport *nt, (qp_num / NTB_NUM_MW * tx_size); tx_size -= sizeof(struct ntb_rx_info); - qp->tx_mw = qp->rx_info + sizeof(struct ntb_rx_info); + qp->tx_mw = qp->rx_info + 1; qp->tx_max_frame = min(transport_mtu, tx_size); qp->tx_max_entry = tx_size / qp->tx_max_frame; qp->tx_index = 0; -- cgit v0.10.2 From 113fc505b83b2d16e820ca74fa07f99a34877b1d Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Wed, 30 Jan 2013 11:40:52 -0700 Subject: NTB: Handle 64bit BAR sizes 64bit BAR sizes are permissible with an NTB device. To support them various modifications and clean-ups were required, most significantly using 2 32bit scratch pad registers for each BAR. Also, modify the driver to allow more than 2 Memory Windows. Signed-off-by: Jon Mason diff --git a/drivers/ntb/ntb_hw.c b/drivers/ntb/ntb_hw.c index 195cc51..2dacd19 100644 --- a/drivers/ntb/ntb_hw.c +++ b/drivers/ntb/ntb_hw.c @@ -1027,8 +1027,8 @@ static int ntb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) ndev->mw[i].vbase = ioremap_wc(pci_resource_start(pdev, MW_TO_BAR(i)), ndev->mw[i].bar_sz); - dev_info(&pdev->dev, "MW %d size %d\n", i, - (u32) pci_resource_len(pdev, MW_TO_BAR(i))); + dev_info(&pdev->dev, "MW %d size %llu\n", i, + pci_resource_len(pdev, MW_TO_BAR(i))); if (!ndev->mw[i].vbase) { dev_warn(&pdev->dev, "Cannot remap BAR %d\n", MW_TO_BAR(i)); diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c index 00f5e80..79a3203 100644 --- a/drivers/ntb/ntb_transport.c +++ b/drivers/ntb/ntb_transport.c @@ -58,7 +58,7 @@ #include #include "ntb_hw.h" -#define NTB_TRANSPORT_VERSION 2 +#define NTB_TRANSPORT_VERSION 3 static unsigned int transport_mtu = 0x401E; module_param(transport_mtu, uint, 0644); @@ -173,10 +173,13 @@ struct ntb_payload_header { enum { VERSION = 0, - MW0_SZ, - MW1_SZ, - NUM_QPS, QP_LINKS, + NUM_QPS, + NUM_MWS, + MW0_SZ_HIGH, + MW0_SZ_LOW, + MW1_SZ_HIGH, + MW1_SZ_LOW, MAX_SPAD, }; @@ -526,6 +529,18 @@ static int ntb_set_mw(struct ntb_transport *nt, int num_mw, unsigned int size) return 0; } +static void ntb_free_mw(struct ntb_transport *nt, int num_mw) +{ + struct ntb_transport_mw *mw = &nt->mw[num_mw]; + struct pci_dev *pdev = ntb_query_pdev(nt->ndev); + + if (!mw->virt_addr) + return; + + dma_free_coherent(&pdev->dev, mw->size, mw->virt_addr, mw->dma_addr); + mw->virt_addr = NULL; +} + static void ntb_qp_link_cleanup(struct work_struct *work) { struct ntb_transport_qp *qp = container_of(work, @@ -604,25 +619,31 @@ static void ntb_transport_link_work(struct work_struct *work) u32 val; int rc, i; - /* send the local info */ - rc = ntb_write_remote_spad(ndev, VERSION, NTB_TRANSPORT_VERSION); - if (rc) { - dev_err(&pdev->dev, "Error writing %x to remote spad %d\n", - 0, VERSION); - goto out; - } + /* send the local info, in the opposite order of the way we read it */ + for (i = 0; i < NTB_NUM_MW; i++) { + rc = ntb_write_remote_spad(ndev, MW0_SZ_HIGH + (i * 2), + ntb_get_mw_size(ndev, i) >> 32); + if (rc) { + dev_err(&pdev->dev, "Error writing %u to remote spad %d\n", + (u32)(ntb_get_mw_size(ndev, i) >> 32), + MW0_SZ_HIGH + (i * 2)); + goto out; + } - rc = ntb_write_remote_spad(ndev, MW0_SZ, ntb_get_mw_size(ndev, 0)); - if (rc) { - dev_err(&pdev->dev, "Error writing %x to remote spad %d\n", - (u32) ntb_get_mw_size(ndev, 0), MW0_SZ); - goto out; + rc = ntb_write_remote_spad(ndev, MW0_SZ_LOW + (i * 2), + (u32) ntb_get_mw_size(ndev, i)); + if (rc) { + dev_err(&pdev->dev, "Error writing %u to remote spad %d\n", + (u32) ntb_get_mw_size(ndev, i), + MW0_SZ_LOW + (i * 2)); + goto out; + } } - rc = ntb_write_remote_spad(ndev, MW1_SZ, ntb_get_mw_size(ndev, 1)); + rc = ntb_write_remote_spad(ndev, NUM_MWS, NTB_NUM_MW); if (rc) { dev_err(&pdev->dev, "Error writing %x to remote spad %d\n", - (u32) ntb_get_mw_size(ndev, 1), MW1_SZ); + NTB_NUM_MW, NUM_MWS); goto out; } @@ -633,16 +654,10 @@ static void ntb_transport_link_work(struct work_struct *work) goto out; } - rc = ntb_read_local_spad(nt->ndev, QP_LINKS, &val); - if (rc) { - dev_err(&pdev->dev, "Error reading spad %d\n", QP_LINKS); - goto out; - } - - rc = ntb_write_remote_spad(ndev, QP_LINKS, val); + rc = ntb_write_remote_spad(ndev, VERSION, NTB_TRANSPORT_VERSION); if (rc) { dev_err(&pdev->dev, "Error writing %x to remote spad %d\n", - val, QP_LINKS); + NTB_TRANSPORT_VERSION, VERSION); goto out; } @@ -667,33 +682,43 @@ static void ntb_transport_link_work(struct work_struct *work) goto out; dev_dbg(&pdev->dev, "Remote max number of qps = %d\n", val); - rc = ntb_read_remote_spad(ndev, MW0_SZ, &val); + rc = ntb_read_remote_spad(ndev, NUM_MWS, &val); if (rc) { - dev_err(&pdev->dev, "Error reading remote spad %d\n", MW0_SZ); + dev_err(&pdev->dev, "Error reading remote spad %d\n", NUM_MWS); goto out; } - if (!val) + if (val != NTB_NUM_MW) goto out; - dev_dbg(&pdev->dev, "Remote MW0 size = %d\n", val); + dev_dbg(&pdev->dev, "Remote number of mws = %d\n", val); - rc = ntb_set_mw(nt, 0, val); - if (rc) - goto out; + for (i = 0; i < NTB_NUM_MW; i++) { + u64 val64; - rc = ntb_read_remote_spad(ndev, MW1_SZ, &val); - if (rc) { - dev_err(&pdev->dev, "Error reading remote spad %d\n", MW1_SZ); - goto out; - } + rc = ntb_read_remote_spad(ndev, MW0_SZ_HIGH + (i * 2), &val); + if (rc) { + dev_err(&pdev->dev, "Error reading remote spad %d\n", + MW0_SZ_HIGH + (i * 2)); + goto out1; + } - if (!val) - goto out; - dev_dbg(&pdev->dev, "Remote MW1 size = %d\n", val); + val64 = (u64) val << 32; - rc = ntb_set_mw(nt, 1, val); - if (rc) - goto out; + rc = ntb_read_remote_spad(ndev, MW0_SZ_LOW + (i * 2), &val); + if (rc) { + dev_err(&pdev->dev, "Error reading remote spad %d\n", + MW0_SZ_LOW + (i * 2)); + goto out1; + } + + val64 |= val; + + dev_dbg(&pdev->dev, "Remote MW%d size = %llu\n", i, val64); + + rc = ntb_set_mw(nt, i, val64); + if (rc) + goto out1; + } nt->transport_link = NTB_LINK_UP; @@ -708,6 +733,9 @@ static void ntb_transport_link_work(struct work_struct *work) return; +out1: + for (i = 0; i < NTB_NUM_MW; i++) + ntb_free_mw(nt, i); out: if (ntb_hw_link_status(ndev)) schedule_delayed_work(&nt->link_work, @@ -897,10 +925,7 @@ void ntb_transport_free(void *transport) pdev = ntb_query_pdev(nt->ndev); for (i = 0; i < NTB_NUM_MW; i++) - if (nt->mw[i].virt_addr) - dma_free_coherent(&pdev->dev, nt->mw[i].size, - nt->mw[i].virt_addr, - nt->mw[i].dma_addr); + ntb_free_mw(nt, i); kfree(nt->qps); ntb_unregister_transport(nt->ndev); -- cgit v0.10.2 From b77b2637b39ecc380bb08992380d7d48452b0872 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Fri, 1 Feb 2013 15:25:37 -0700 Subject: NTB: Link toggle memory leak Each link-up will allocate a new NTB receive buffer when the NTB properties are negotiated with the remote system. These allocations did not check for existing buffers and thus did not free them. Now, the driver will check for an existing buffer and free it if not of the correct size, before trying to alloc a new one. Signed-off-by: Jon Mason diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c index 79a3203..be416d6 100644 --- a/drivers/ntb/ntb_transport.c +++ b/drivers/ntb/ntb_transport.c @@ -507,17 +507,37 @@ static void ntb_transport_setup_qp_mw(struct ntb_transport *nt, qp->tx_pkts = 0; } +static void ntb_free_mw(struct ntb_transport *nt, int num_mw) +{ + struct ntb_transport_mw *mw = &nt->mw[num_mw]; + struct pci_dev *pdev = ntb_query_pdev(nt->ndev); + + if (!mw->virt_addr) + return; + + dma_free_coherent(&pdev->dev, mw->size, mw->virt_addr, mw->dma_addr); + mw->virt_addr = NULL; +} + static int ntb_set_mw(struct ntb_transport *nt, int num_mw, unsigned int size) { struct ntb_transport_mw *mw = &nt->mw[num_mw]; struct pci_dev *pdev = ntb_query_pdev(nt->ndev); + /* No need to re-setup */ + if (mw->size == ALIGN(size, 4096)) + return 0; + + if (mw->size != 0) + ntb_free_mw(nt, num_mw); + /* Alloc memory for receiving data. Must be 4k aligned */ mw->size = ALIGN(size, 4096); mw->virt_addr = dma_alloc_coherent(&pdev->dev, mw->size, &mw->dma_addr, GFP_KERNEL); if (!mw->virt_addr) { + mw->size = 0; dev_err(&pdev->dev, "Unable to allocate MW buffer of size %d\n", (int) mw->size); return -ENOMEM; @@ -529,18 +549,6 @@ static int ntb_set_mw(struct ntb_transport *nt, int num_mw, unsigned int size) return 0; } -static void ntb_free_mw(struct ntb_transport *nt, int num_mw) -{ - struct ntb_transport_mw *mw = &nt->mw[num_mw]; - struct pci_dev *pdev = ntb_query_pdev(nt->ndev); - - if (!mw->virt_addr) - return; - - dma_free_coherent(&pdev->dev, mw->size, mw->virt_addr, mw->dma_addr); - mw->virt_addr = NULL; -} - static void ntb_qp_link_cleanup(struct work_struct *work) { struct ntb_transport_qp *qp = container_of(work, -- cgit v0.10.2 From 90f9e934647e652a69396e18c779215a493271cf Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Fri, 1 Feb 2013 15:34:35 -0700 Subject: NTB: reset tx_index on link toggle If the NTB link toggles, the driver could stop receiving due to the tx_index not being set to 0 on the transmitting size on a link-up event. This is due to the driver expecting the incoming data to start at the beginning of the receive buffer and not at a random place. Signed-off-by: Jon Mason diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c index be416d6..73a000e 100644 --- a/drivers/ntb/ntb_transport.c +++ b/drivers/ntb/ntb_transport.c @@ -505,6 +505,7 @@ static void ntb_transport_setup_qp_mw(struct ntb_transport *nt, qp->rx_pkts = 0; qp->tx_pkts = 0; + qp->tx_index = 0; } static void ntb_free_mw(struct ntb_transport *nt, int num_mw) @@ -819,7 +820,6 @@ static void ntb_transport_init_queue(struct ntb_transport *nt, qp->tx_mw = qp->rx_info + 1; qp->tx_max_frame = min(transport_mtu, tx_size); qp->tx_max_entry = tx_size / qp->tx_max_frame; - qp->tx_index = 0; if (nt->debugfs_dir) { char debugfs_name[4]; -- cgit v0.10.2 From c9d534c8cbaedbb522a1d2cb037c6c394f610317 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Fri, 1 Feb 2013 15:45:16 -0700 Subject: NTB: Correctly handle receive buffers of the minimal size The ring logic of the NTB receive buffer/transmit memory window requires there to be at least 2 payload sized allotments. For the minimal size case, split the buffer into two and set the transport_mtu to the appropriate size. Signed-off-by: Jon Mason diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c index 73a000e..cd9745b 100644 --- a/drivers/ntb/ntb_transport.c +++ b/drivers/ntb/ntb_transport.c @@ -490,11 +490,12 @@ static void ntb_transport_setup_qp_mw(struct ntb_transport *nt, rx_size -= sizeof(struct ntb_rx_info); qp->rx_buff = qp->remote_rx_info + 1; - qp->rx_max_frame = min(transport_mtu, rx_size); + /* Due to housekeeping, there must be atleast 2 buffs */ + qp->rx_max_frame = min(transport_mtu, rx_size / 2); qp->rx_max_entry = rx_size / qp->rx_max_frame; qp->rx_index = 0; - qp->remote_rx_info->entry = qp->rx_max_entry; + qp->remote_rx_info->entry = qp->rx_max_entry - 1; /* setup the hdr offsets with 0's */ for (i = 0; i < qp->rx_max_entry; i++) { @@ -818,7 +819,8 @@ static void ntb_transport_init_queue(struct ntb_transport *nt, tx_size -= sizeof(struct ntb_rx_info); qp->tx_mw = qp->rx_info + 1; - qp->tx_max_frame = min(transport_mtu, tx_size); + /* Due to housekeeping, there must be atleast 2 buffs */ + qp->tx_max_frame = min(transport_mtu, tx_size / 2); qp->tx_max_entry = tx_size / qp->tx_max_frame; if (nt->debugfs_dir) { -- cgit v0.10.2 From c336acd3331dcc191a97dbc66a557d47741657c7 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Thu, 17 Jan 2013 15:28:45 -0700 Subject: NTB: memcpy lockup workaround The system will appear to lockup for long periods of time due to the NTB driver spending too much time in memcpy. Avoid this by reducing the number of packets that can be serviced on a given interrupt. Signed-off-by: Jon Mason diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c index cd9745b..583a7d3 100644 --- a/drivers/ntb/ntb_transport.c +++ b/drivers/ntb/ntb_transport.c @@ -1034,11 +1034,16 @@ out: static void ntb_transport_rx(unsigned long data) { struct ntb_transport_qp *qp = (struct ntb_transport_qp *)data; - int rc; + int rc, i; - do { + /* Limit the number of packets processed in a single interrupt to + * provide fairness to others + */ + for (i = 0; i < qp->rx_max_entry; i++) { rc = ntb_process_rxc(qp); - } while (!rc); + if (rc) + break; + } } static void ntb_transport_rxc_db(void *data, int db_num) -- cgit v0.10.2 From 904435cf76a9bdd5eb41b1c4e049d5a64f3a8400 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Thu, 18 Apr 2013 13:36:43 -0700 Subject: ntb_netdev: remove from list on exit The ntb_netdev device is not removed from the global list of devices upon device removal. If the device is re-added, the removal code would find the first instance and try to remove an already removed device. Signed-off-by: Jon Mason diff --git a/drivers/net/ntb_netdev.c b/drivers/net/ntb_netdev.c index ed947dd..f3cdf64 100644 --- a/drivers/net/ntb_netdev.c +++ b/drivers/net/ntb_netdev.c @@ -375,6 +375,8 @@ static void ntb_netdev_remove(struct pci_dev *pdev) if (dev == NULL) return; + list_del(&dev->list); + ndev = dev->ndev; unregister_netdev(ndev); -- cgit v0.10.2 From 8b19d450ad188d402a183ff4a4d40f31c3916fbf Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Fri, 26 Apr 2013 14:51:57 -0700 Subject: NTB: Multiple NTB client fix Fix issue with adding multiple ntb client devices to the ntb virtual bus. Previously, multiple devices would be added with the same name, resulting in crashes. To get around this issue, add a unique number to the device when it is added. Signed-off-by: Jon Mason diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c index 583a7d3..f8d7081 100644 --- a/drivers/ntb/ntb_transport.c +++ b/drivers/ntb/ntb_transport.c @@ -300,7 +300,7 @@ int ntb_register_client_dev(char *device_name) { struct ntb_transport_client_dev *client_dev; struct ntb_transport *nt; - int rc; + int rc, i = 0; if (list_empty(&ntb_transport_list)) return -ENODEV; @@ -318,7 +318,7 @@ int ntb_register_client_dev(char *device_name) dev = &client_dev->dev; /* setup and register client devices */ - dev_set_name(dev, "%s", device_name); + dev_set_name(dev, "%s%d", device_name, i); dev->bus = &ntb_bus_type; dev->release = ntb_client_release; dev->parent = &ntb_query_pdev(nt->ndev)->dev; @@ -330,6 +330,7 @@ int ntb_register_client_dev(char *device_name) } list_add_tail(&client_dev->entry, &nt->client_devs); + i++; } return 0; -- cgit v0.10.2 From 7a26b53070f0099dfcfc9d499458de861c5c4859 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 15 May 2013 16:49:35 +0000 Subject: ACPI / scan: Fix memory leak on acpi_scan_init_hotplug() error path Following commit 6b772e8f9 (ACPI: Update PNPID match handling for notify), the acpi_scan_init_hotplug() calls acpi_set_pnp_ids() which allocates acpi_hardware_id and copies a few strings (kstrdup). If the devices does not have hardware_id set, the function exits without freeing the previously allocated ids (and kmemleak complains). This patch calls simply changes 'return' on error to a 'goto out' which calls acpi_free_pnp_ids(). Reported-by: Larry Finger Signed-off-by: Catalin Marinas Reviewed-by: Toshi Kani Tested-by: Toshi Kani Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index fe158fd..c1bc608 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1785,7 +1785,7 @@ static void acpi_scan_init_hotplug(acpi_handle handle, int type) acpi_set_pnp_ids(handle, &pnp, type); if (!pnp.type.hardware_id) - return; + goto out; /* * This relies on the fact that acpi_install_notify_handler() will not @@ -1800,6 +1800,7 @@ static void acpi_scan_init_hotplug(acpi_handle handle, int type) } } +out: acpi_free_pnp_ids(&pnp); } -- cgit v0.10.2 From a66b2e503fc79fff6632d02ef5a0ee47c1d2553d Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Wed, 15 May 2013 21:47:17 +0200 Subject: cpufreq: Preserve sysfs files across suspend/resume The file permissions of cpufreq per-cpu sysfs files are not preserved across suspend/resume because we internally go through the CPU Hotplug path which reinitializes the file permissions on CPU online. But the user is not supposed to know that we are using CPU hotplug internally within suspend/resume (IOW, the kernel should not silently wreck the user-set file permissions across a suspend cycle). Therefore, we need to preserve the file permissions as they are across suspend/resume. The simplest way to achieve that is to just not touch the sysfs files at all - ie., just ignore the CPU hotplug notifications in the suspend/resume path (_FROZEN) in the cpufreq hotplug callback. Reported-by: Robert Jarzmik Reported-by: Durgadoss R Signed-off-by: Srivatsa S. Bhat Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index b7acfd1..4b8c7f2 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -1832,15 +1832,13 @@ static int __cpuinit cpufreq_cpu_callback(struct notifier_block *nfb, if (dev) { switch (action) { case CPU_ONLINE: - case CPU_ONLINE_FROZEN: cpufreq_add_dev(dev, NULL); break; case CPU_DOWN_PREPARE: - case CPU_DOWN_PREPARE_FROZEN: + case CPU_UP_CANCELED_FROZEN: __cpufreq_remove_dev(dev, NULL); break; case CPU_DOWN_FAILED: - case CPU_DOWN_FAILED_FROZEN: cpufreq_add_dev(dev, NULL); break; } diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c index bfd6273..fb65dec 100644 --- a/drivers/cpufreq/cpufreq_stats.c +++ b/drivers/cpufreq/cpufreq_stats.c @@ -349,15 +349,16 @@ static int __cpuinit cpufreq_stat_cpu_callback(struct notifier_block *nfb, switch (action) { case CPU_ONLINE: - case CPU_ONLINE_FROZEN: cpufreq_update_policy(cpu); break; case CPU_DOWN_PREPARE: - case CPU_DOWN_PREPARE_FROZEN: cpufreq_stats_free_sysfs(cpu); break; case CPU_DEAD: - case CPU_DEAD_FROZEN: + cpufreq_stats_free_table(cpu); + break; + case CPU_UP_CANCELED_FROZEN: + cpufreq_stats_free_sysfs(cpu); cpufreq_stats_free_table(cpu); break; } -- cgit v0.10.2 From 1be0c25da56e860992af972a60321563ca2cfcd1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 15 May 2013 14:24:24 -0700 Subject: workqueue: don't perform NUMA-aware allocations on offline nodes in wq_numa_init() wq_numa_init() builds per-node cpumasks which are later used to make unbound workqueues NUMA-aware. The cpumasks are allocated using alloc_cpumask_var_node() for all possible nodes. Unfortunately, on machines with off-line nodes, this leads to NUMA-aware allocations on existing bug offline nodes, which in turn triggers BUG in the memory allocation code. Fix it by using NUMA_NO_NODE for cpumask allocations for offline nodes. kernel BUG at include/linux/gfp.h:323! invalid opcode: 0000 [#1] SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0+ #1 Hardware name: ProLiant BL465c G7, BIOS A19 12/10/2011 task: ffff880234608000 ti: ffff880234602000 task.ti: ffff880234602000 RIP: 0010:[] [] new_slab+0x2ad/0x340 RSP: 0000:ffff880234603bf8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880237404b40 RCX: 00000000000000d0 RDX: 0000000000000001 RSI: 0000000000000003 RDI: 00000000002052d0 RBP: ffff880234603c28 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000001 R11: ffffffff812e3aa8 R12: 0000000000000001 R13: ffff8802378161c0 R14: 0000000000030027 R15: 00000000000040d0 FS: 0000000000000000(0000) GS:ffff880237800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff88043fdff000 CR3: 00000000018d5000 CR4: 00000000000007f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff880234603c28 0000000000000001 00000000000000d0 ffff8802378161c0 ffff880237404b40 ffff880237404b40 ffff880234603d28 ffffffff815edba1 ffff880237816140 0000000000000000 ffff88023740e1c0 Call Trace: [] __slab_alloc+0x330/0x4f2 [] kmem_cache_alloc_node_trace+0xa5/0x200 [] alloc_cpumask_var_node+0x28/0x90 [] wq_numa_init+0x10d/0x1be [] init_workqueues+0x64/0x341 [] do_one_initcall+0xea/0x1a0 [] kernel_init_freeable+0xb7/0x1ec [] kernel_init+0xe/0xf0 [] ret_from_fork+0x7c/0xb0 Code: 45 84 ac 00 00 00 f0 41 80 4d 00 40 e9 f6 fe ff ff 66 0f 1f 84 00 00 00 00 00 e8 eb 4b ff ff 49 89 c5 e9 05 fe ff ff <0f> 0b 4c 8b 73 38 44 89 ff 81 cf 00 00 20 00 4c 89 f6 48 c1 ee Signed-off-by: Tejun Heo Reported-and-Tested-by: Lingzhu Xiang diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 02916f4..ee8e29a 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -4905,7 +4905,8 @@ static void __init wq_numa_init(void) BUG_ON(!tbl); for_each_node(node) - BUG_ON(!alloc_cpumask_var_node(&tbl[node], GFP_KERNEL, node)); + BUG_ON(!alloc_cpumask_var_node(&tbl[node], GFP_KERNEL, + node_online(node) ? node : NUMA_NO_NODE)); for_each_possible_cpu(cpu) { node = cpu_to_node(cpu); -- cgit v0.10.2 From 0d709d91b85b71568b41b323d2a2c761f18e5213 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 14 May 2013 21:20:02 +0000 Subject: ipg: fix an unsigned widening cast of '~' truncation issue The bug here is this code from ipg_nic_hard_start_xmit(): txfd->tfc &= cpu_to_le64(~IPG_TFC_TFDDONE); IPG_TFC_TFDDONE is 0x0000000080000000 so it's an unsigned int. The negated value is 0x7fffffff but 0xffffffff7fffffff was intended. The other values in this file don't need to be changed but I did it for consistency. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/icplus/ipg.h b/drivers/net/ethernet/icplus/ipg.h index 6ce0273..abb300a 100644 --- a/drivers/net/ethernet/icplus/ipg.h +++ b/drivers/net/ethernet/icplus/ipg.h @@ -195,57 +195,57 @@ enum ipg_regs { /* TFD data structure masks. */ /* TFDList, TFC */ -#define IPG_TFC_RSVD_MASK 0x0000FFFF9FFFFFFF -#define IPG_TFC_FRAMEID 0x000000000000FFFF -#define IPG_TFC_WORDALIGN 0x0000000000030000 -#define IPG_TFC_WORDALIGNTODWORD 0x0000000000000000 -#define IPG_TFC_WORDALIGNTOWORD 0x0000000000020000 -#define IPG_TFC_WORDALIGNDISABLED 0x0000000000030000 -#define IPG_TFC_TCPCHECKSUMENABLE 0x0000000000040000 -#define IPG_TFC_UDPCHECKSUMENABLE 0x0000000000080000 -#define IPG_TFC_IPCHECKSUMENABLE 0x0000000000100000 -#define IPG_TFC_FCSAPPENDDISABLE 0x0000000000200000 -#define IPG_TFC_TXINDICATE 0x0000000000400000 -#define IPG_TFC_TXDMAINDICATE 0x0000000000800000 -#define IPG_TFC_FRAGCOUNT 0x000000000F000000 -#define IPG_TFC_VLANTAGINSERT 0x0000000010000000 -#define IPG_TFC_TFDDONE 0x0000000080000000 -#define IPG_TFC_VID 0x00000FFF00000000 -#define IPG_TFC_CFI 0x0000100000000000 -#define IPG_TFC_USERPRIORITY 0x0000E00000000000 +#define IPG_TFC_RSVD_MASK 0x0000FFFF9FFFFFFFULL +#define IPG_TFC_FRAMEID 0x000000000000FFFFULL +#define IPG_TFC_WORDALIGN 0x0000000000030000ULL +#define IPG_TFC_WORDALIGNTODWORD 0x0000000000000000ULL +#define IPG_TFC_WORDALIGNTOWORD 0x0000000000020000ULL +#define IPG_TFC_WORDALIGNDISABLED 0x0000000000030000ULL +#define IPG_TFC_TCPCHECKSUMENABLE 0x0000000000040000ULL +#define IPG_TFC_UDPCHECKSUMENABLE 0x0000000000080000ULL +#define IPG_TFC_IPCHECKSUMENABLE 0x0000000000100000ULL +#define IPG_TFC_FCSAPPENDDISABLE 0x0000000000200000ULL +#define IPG_TFC_TXINDICATE 0x0000000000400000ULL +#define IPG_TFC_TXDMAINDICATE 0x0000000000800000ULL +#define IPG_TFC_FRAGCOUNT 0x000000000F000000ULL +#define IPG_TFC_VLANTAGINSERT 0x0000000010000000ULL +#define IPG_TFC_TFDDONE 0x0000000080000000ULL +#define IPG_TFC_VID 0x00000FFF00000000ULL +#define IPG_TFC_CFI 0x0000100000000000ULL +#define IPG_TFC_USERPRIORITY 0x0000E00000000000ULL /* TFDList, FragInfo */ -#define IPG_TFI_RSVD_MASK 0xFFFF00FFFFFFFFFF -#define IPG_TFI_FRAGADDR 0x000000FFFFFFFFFF -#define IPG_TFI_FRAGLEN 0xFFFF000000000000LL +#define IPG_TFI_RSVD_MASK 0xFFFF00FFFFFFFFFFULL +#define IPG_TFI_FRAGADDR 0x000000FFFFFFFFFFULL +#define IPG_TFI_FRAGLEN 0xFFFF000000000000ULL /* RFD data structure masks. */ /* RFDList, RFS */ -#define IPG_RFS_RSVD_MASK 0x0000FFFFFFFFFFFF -#define IPG_RFS_RXFRAMELEN 0x000000000000FFFF -#define IPG_RFS_RXFIFOOVERRUN 0x0000000000010000 -#define IPG_RFS_RXRUNTFRAME 0x0000000000020000 -#define IPG_RFS_RXALIGNMENTERROR 0x0000000000040000 -#define IPG_RFS_RXFCSERROR 0x0000000000080000 -#define IPG_RFS_RXOVERSIZEDFRAME 0x0000000000100000 -#define IPG_RFS_RXLENGTHERROR 0x0000000000200000 -#define IPG_RFS_VLANDETECTED 0x0000000000400000 -#define IPG_RFS_TCPDETECTED 0x0000000000800000 -#define IPG_RFS_TCPERROR 0x0000000001000000 -#define IPG_RFS_UDPDETECTED 0x0000000002000000 -#define IPG_RFS_UDPERROR 0x0000000004000000 -#define IPG_RFS_IPDETECTED 0x0000000008000000 -#define IPG_RFS_IPERROR 0x0000000010000000 -#define IPG_RFS_FRAMESTART 0x0000000020000000 -#define IPG_RFS_FRAMEEND 0x0000000040000000 -#define IPG_RFS_RFDDONE 0x0000000080000000 -#define IPG_RFS_TCI 0x0000FFFF00000000 +#define IPG_RFS_RSVD_MASK 0x0000FFFFFFFFFFFFULL +#define IPG_RFS_RXFRAMELEN 0x000000000000FFFFULL +#define IPG_RFS_RXFIFOOVERRUN 0x0000000000010000ULL +#define IPG_RFS_RXRUNTFRAME 0x0000000000020000ULL +#define IPG_RFS_RXALIGNMENTERROR 0x0000000000040000ULL +#define IPG_RFS_RXFCSERROR 0x0000000000080000ULL +#define IPG_RFS_RXOVERSIZEDFRAME 0x0000000000100000ULL +#define IPG_RFS_RXLENGTHERROR 0x0000000000200000ULL +#define IPG_RFS_VLANDETECTED 0x0000000000400000ULL +#define IPG_RFS_TCPDETECTED 0x0000000000800000ULL +#define IPG_RFS_TCPERROR 0x0000000001000000ULL +#define IPG_RFS_UDPDETECTED 0x0000000002000000ULL +#define IPG_RFS_UDPERROR 0x0000000004000000ULL +#define IPG_RFS_IPDETECTED 0x0000000008000000ULL +#define IPG_RFS_IPERROR 0x0000000010000000ULL +#define IPG_RFS_FRAMESTART 0x0000000020000000ULL +#define IPG_RFS_FRAMEEND 0x0000000040000000ULL +#define IPG_RFS_RFDDONE 0x0000000080000000ULL +#define IPG_RFS_TCI 0x0000FFFF00000000ULL /* RFDList, FragInfo */ -#define IPG_RFI_RSVD_MASK 0xFFFF00FFFFFFFFFF -#define IPG_RFI_FRAGADDR 0x000000FFFFFFFFFF -#define IPG_RFI_FRAGLEN 0xFFFF000000000000LL +#define IPG_RFI_RSVD_MASK 0xFFFF00FFFFFFFFFFULL +#define IPG_RFI_FRAGADDR 0x000000FFFFFFFFFFULL +#define IPG_RFI_FRAGLEN 0xFFFF000000000000ULL /* I/O Register masks. */ -- cgit v0.10.2 From 3169134478a9638baf0dbb4fdca5a0718cbe8e27 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 15 May 2013 07:06:26 +0000 Subject: fec: Fix inconsistent lock state fec_restart() runs in softirq context and we should use the netif_tx_lock_bh/netif_tx_unlock_bh() variants to avoid the following warning that happens since commit 54309fa6 ("net: fec: fix kernel oops when plug/unplug cable many times"): [ 9.753168] ================================= [ 9.757540] [ INFO: inconsistent lock state ] [ 9.761921] 3.10.0-rc1-next-20130514 #13 Not tainted [ 9.766897] --------------------------------- [ 9.771264] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 9.777288] swapper/0 [HC0[0]:SC1[3]:HE1:SE0] takes: [ 9.782261] (_xmit_ETHER#2){+.?...}, at: [] sch_direct_xmit+0xa0/0x2d4 [ 9.789879] {SOFTIRQ-ON-W} state was registered at: [ 9.794769] [] __lock_acquire+0x528/0x1bc0 [ 9.799953] [] lock_acquire+0xa0/0x108 [ 9.804780] [] _raw_spin_lock+0x28/0x38 [ 9.809702] [] fec_restart+0x5d0/0x664 [ 9.814542] [] fec_enet_adjust_link+0xa8/0xc0 [ 9.819978] [] phy_state_machine+0x2fc/0x370 [ 9.825323] [] process_one_work+0x1c0/0x4a0 [ 9.830589] [] worker_thread+0x138/0x394 [ 9.835587] [] kthread+0xa4/0xb0 [ 9.839890] [] ret_from_fork+0x14/0x34 [ 9.844728] irq event stamp: 185984 [ 9.848226] hardirqs last enabled at (185984): [] local_bh_enable_ip+0x84/0xf0 [ 9.856450] hardirqs last disabled at (185983): [] local_bh_enable_ip+0x44/0xf0 [ 9.864667] softirqs last enabled at (185966): [] irq_enter+0x64/0x68 [ 9.872099] softirqs last disabled at (185967): [] irq_exit+0x9c/0xd8 [ 9.879440] [ 9.879440] other info that might help us debug this: [ 9.885981] Possible unsafe locking scenario: [ 9.885981] [ 9.891912] CPU0 [ 9.894364] ---- [ 9.896814] lock(_xmit_ETHER#2); [ 9.900259] [ 9.902884] lock(_xmit_ETHER#2); [ 9.906500] [ 9.906500] *** DEADLOCK *** Reported-by: Shawn Guo Suggested-by: Eric Dumazet Signed-off-by: Fabio Estevam Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index ca9825c..658fbc1 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -451,7 +451,7 @@ fec_restart(struct net_device *ndev, int duplex) netif_device_detach(ndev); napi_disable(&fep->napi); netif_stop_queue(ndev); - netif_tx_lock(ndev); + netif_tx_lock_bh(ndev); } /* Whack a reset. We should wait for this. */ @@ -619,7 +619,7 @@ fec_restart(struct net_device *ndev, int duplex) netif_device_attach(ndev); napi_enable(&fep->napi); netif_wake_queue(ndev); - netif_tx_unlock(ndev); + netif_tx_unlock_bh(ndev); } } -- cgit v0.10.2 From 1ed0d56c1d5ff07a5d57e6467621f9a0c09b0b65 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 15 May 2013 07:06:27 +0000 Subject: fec: Invert the order of function calls in fec_restart() commit 54309fa6 ("net: fec: fix kernel oops when plug/unplug cable many times") introduced the following 'if' block in the beginning of fec_start(): if (netif_running(ndev)) { netif_device_detach(ndev); napi_disable(&fep->napi); netif_stop_queue(ndev); netif_tx_lock_bh(ndev); } Then later in the end of fec_restart() there is another block that calls the opposite of each one of these functions. The correct approach would be to also call them with in the reverse order, so that we have as result: if (netif_running(ndev)) { netif_tx_unlock_bh(ndev); netif_wake_queue(ndev); napi_enable(&fep->napi); netif_device_attach(ndev); } Suggested-by: Eric Dumazet Signed-off-by: Fabio Estevam Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 658fbc1..570dfad 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -616,10 +616,10 @@ fec_restart(struct net_device *ndev, int duplex) writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK); if (netif_running(ndev)) { - netif_device_attach(ndev); - napi_enable(&fep->napi); - netif_wake_queue(ndev); netif_tx_unlock_bh(ndev); + netif_wake_queue(ndev); + napi_enable(&fep->napi); + netif_device_attach(ndev); } } -- cgit v0.10.2 From 755ccb9d577b95b43537cfeb36da59140412f858 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 15 May 2013 08:00:25 +0000 Subject: broadcom: add include guards to include/linux/brcmphy.h include/linux/brcmphy.h is currently not protected against double inclusion, add ifdefs guard to fix that. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h index b840a49..677b4f0 100644 --- a/include/linux/brcmphy.h +++ b/include/linux/brcmphy.h @@ -1,3 +1,6 @@ +#ifndef _LINUX_BRCMPHY_H +#define _LINUX_BRCMPHY_H + #define PHY_ID_BCM50610 0x0143bd60 #define PHY_ID_BCM50610M 0x0143bd70 #define PHY_ID_BCM5241 0x0143bc30 @@ -29,3 +32,5 @@ #define PHY_BRCM_CLEAR_RGMII_MODE 0x00004000 #define PHY_BRCM_DIS_TXCRXC_NOENRGY 0x00008000 #define PHY_BCM_FLAGS_VALID 0x80000000 + +#endif /* _LINUX_BRCMPHY_H */ -- cgit v0.10.2 From b1b9fbd0507aac4ddce14f513d52332f50be89dc Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 14 May 2013 12:58:47 +0200 Subject: ALSA: hda - Check the activity of the NID to be powered down When an inactive path is powered down with spec->power_down_unused flag, we should check the activity of each widget in the path whether it's still referred from any active path. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index ac079f9..ae85bbd2 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -606,6 +606,10 @@ static bool is_active_nid(struct hda_codec *codec, hda_nid_t nid, return false; } +/* check whether the NID is referred by any active paths */ +#define is_active_nid_for_any(codec, nid) \ + is_active_nid(codec, nid, HDA_OUTPUT, 0) + /* get the default amp value for the target state */ static int get_amp_val_to_activate(struct hda_codec *codec, hda_nid_t nid, int dir, unsigned int caps, bool enable) @@ -759,7 +763,8 @@ static void path_power_down_sync(struct hda_codec *codec, struct nid_path *path) for (i = 0; i < path->depth; i++) { hda_nid_t nid = path->path[i]; - if (!snd_hda_check_power_state(codec, nid, AC_PWRST_D3)) { + if (!snd_hda_check_power_state(codec, nid, AC_PWRST_D3) && + !is_active_nid_for_any(codec, nid)) { snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_POWER_STATE, AC_PWRST_D3); @@ -4157,7 +4162,7 @@ static unsigned int snd_hda_gen_path_power_filter(struct hda_codec *codec, return power_state; if (get_wcaps_type(get_wcaps(codec, nid)) >= AC_WID_POWER) return power_state; - if (is_active_nid(codec, nid, HDA_OUTPUT, 0)) + if (is_active_nid_for_any(codec, nid)) return power_state; return AC_PWRST_D3; } -- cgit v0.10.2 From 088578617d2aaab05ea96b529f16c9a2f1cfbbee Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Mon, 6 May 2013 11:01:05 +1000 Subject: ALSA: snd-aoa: Add a layout entry for PowerBook6,5 Either one or a combination of commits 81e5d86 "Register i2c devices from device-tree" and 3a3dd01 "Improve detection of devices from device-tree" broke sound on PowerBook6,5 machines. Fix it by adding an entry to the new driver to match PowerBook6,5 machines. Signed-off-by: Michael Ellerman Acked-by: Benjamin Herrenschmidt Signed-off-by: Takashi Iwai diff --git a/sound/aoa/fabrics/layout.c b/sound/aoa/fabrics/layout.c index 552b97a..61ab640 100644 --- a/sound/aoa/fabrics/layout.c +++ b/sound/aoa/fabrics/layout.c @@ -113,6 +113,7 @@ MODULE_ALIAS("sound-layout-100"); MODULE_ALIAS("aoa-device-id-14"); MODULE_ALIAS("aoa-device-id-22"); MODULE_ALIAS("aoa-device-id-35"); +MODULE_ALIAS("aoa-device-id-44"); /* onyx with all but microphone connected */ static struct codec_connection onyx_connections_nomic[] = { @@ -361,6 +362,13 @@ static struct layout layouts[] = { .connections = tas_connections_nolineout, }, }, + /* PowerBook6,5 */ + { .device_id = 44, + .codecs[0] = { + .name = "tas", + .connections = tas_connections_all, + }, + }, /* PowerBook6,7 */ { .layout_id = 80, .codecs[0] = { diff --git a/sound/aoa/soundbus/i2sbus/core.c b/sound/aoa/soundbus/i2sbus/core.c index 0106583..15e7613 100644 --- a/sound/aoa/soundbus/i2sbus/core.c +++ b/sound/aoa/soundbus/i2sbus/core.c @@ -200,7 +200,8 @@ static int i2sbus_add_dev(struct macio_dev *macio, * We probably cannot handle all device-id machines, * so restrict to those we do handle for now. */ - if (id && (*id == 22 || *id == 14 || *id == 35)) { + if (id && (*id == 22 || *id == 14 || *id == 35 || + *id == 44)) { snprintf(dev->sound.modalias, 32, "aoa-device-id-%d", *id); ok = 1; -- cgit v0.10.2 From 436c4a0cfbc4c7a95c4ea37dbd9f697d5dfd553f Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Wed, 15 May 2013 13:56:00 +0200 Subject: ALSA: hda - Add headset mic support for another Dell machine BugLink: https://bugs.launchpad.net/bugs/1180351 Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 6bf47f7..59d2e91 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3482,6 +3482,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x05c9, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05ca, "Dell", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05cb, "Dell", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1028, 0x05de, "Dell", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05e9, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05ea, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05eb, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), -- cgit v0.10.2 From f66ba560943ae21f5d1e505bad0a3591823b2b37 Mon Sep 17 00:00:00 2001 From: Luiz Capitulino Date: Wed, 15 May 2013 12:06:26 -0400 Subject: package: Makefile: unbreak binrpm-pkg target Commit 6501320311664e11ad5489fedb17ea1f817c2617 dropped the rpm spec as a prerequisite for the binrpm-pkg target but forgot to update $< usage, which causes the rule to break. This commit fixes that by replacing $< with the spec name. Signed-off-by: Luiz Capitulino Signed-off-by: Michal Marek diff --git a/scripts/package/Makefile b/scripts/package/Makefile index 84a4060..a4f31c9 100644 --- a/scripts/package/Makefile +++ b/scripts/package/Makefile @@ -63,7 +63,7 @@ binrpm-pkg: FORCE mv -f $(objtree)/.tmp_version $(objtree)/.version $(RPM) $(RPMOPTS) --define "_builddir $(objtree)" --target \ - $(UTS_MACHINE) -bb $< + $(UTS_MACHINE) -bb $(objtree)/binkernel.spec rm binkernel.spec # Deb target -- cgit v0.10.2 From c972c1280387e7015790d251160039ea2077e430 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Wed, 17 Apr 2013 14:28:47 -0700 Subject: mfd: tps65912: Select MFD_CORE CONFIG_MFD_CORE must be selected for TPS65912 to properly buid. Otherwise it results in a link error: drivers/built-in.o: In function `tps65912_device_init': (.text+0x587e4): undefined reference to `mfd_add_devices' drivers/built-in.o: In function `tps65912_device_init': (.text+0x5884c): undefined reference to `mfd_remove_devices' drivers/built-in.o: In function `tps65912_device_exit': (.text+0x58878): undefined reference to `mfd_remove_devices' Signed-off-by: David Rientjes Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index d9aed15..5ea1f8c 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -818,6 +818,7 @@ config MFD_TPS65910 config MFD_TPS65912 bool "TI TPS65912 Power Management chip" depends on GPIOLIB + select MFD_CORE help If you say yes here you get support for the TPS65912 series of PM chips. -- cgit v0.10.2 From abfdbd53a4e28844ad953b313f017f55edbb85b7 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 15 May 2013 11:28:54 -0700 Subject: SUNRPC: Faster detection if gssd is actually running Recent changes to the NFS security flavour negotiation mean that we have a stronger dependency on rpc.gssd. If the latter is not running, because the user failed to start it, then we time out and mark the container as not having an instance. We then use that information to time out faster the next time. If, on the other hand, the rpc.gssd successfully binds to an rpc_pipe, then we mark the container as having an rpc.gssd instance. Signed-off-by: Trond Myklebust diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index f17f3c5..3aff72f 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -52,6 +52,8 @@ #include #include +#include "../netns.h" + static const struct rpc_authops authgss_ops; static const struct rpc_credops gss_credops; @@ -559,9 +561,12 @@ out: static inline int gss_create_upcall(struct gss_auth *gss_auth, struct gss_cred *gss_cred) { + struct net *net = rpc_net_ns(gss_auth->client); + struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); struct rpc_pipe *pipe; struct rpc_cred *cred = &gss_cred->gc_base; struct gss_upcall_msg *gss_msg; + unsigned long timeout; DEFINE_WAIT(wait); int err; @@ -569,11 +574,17 @@ gss_create_upcall(struct gss_auth *gss_auth, struct gss_cred *gss_cred) __func__, from_kuid(&init_user_ns, cred->cr_uid)); retry: err = 0; + /* Default timeout is 15s unless we know that gssd is not running */ + timeout = 15 * HZ; + if (!sn->gssd_running) + timeout = HZ >> 2; gss_msg = gss_setup_upcall(gss_auth->client, gss_auth, cred); if (PTR_ERR(gss_msg) == -EAGAIN) { err = wait_event_interruptible_timeout(pipe_version_waitqueue, - pipe_version >= 0, 15*HZ); + pipe_version >= 0, timeout); if (pipe_version < 0) { + if (err == 0) + sn->gssd_running = 0; warn_gssd(); err = -EACCES; } diff --git a/net/sunrpc/netns.h b/net/sunrpc/netns.h index 7111a4c..0827f64 100644 --- a/net/sunrpc/netns.h +++ b/net/sunrpc/netns.h @@ -29,6 +29,8 @@ struct sunrpc_net { struct rpc_clnt *gssp_clnt; int use_gss_proxy; struct proc_dir_entry *use_gssp_proc; + + unsigned int gssd_running; }; extern int sunrpc_net_id; diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c index a9129f8..a370762 100644 --- a/net/sunrpc/rpc_pipe.c +++ b/net/sunrpc/rpc_pipe.c @@ -216,11 +216,14 @@ rpc_destroy_inode(struct inode *inode) static int rpc_pipe_open(struct inode *inode, struct file *filp) { + struct net *net = inode->i_sb->s_fs_info; + struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); struct rpc_pipe *pipe; int first_open; int res = -ENXIO; mutex_lock(&inode->i_mutex); + sn->gssd_running = 1; pipe = RPC_I(inode)->pipe; if (pipe == NULL) goto out; @@ -1069,6 +1072,7 @@ void rpc_pipefs_init_net(struct net *net) struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); mutex_init(&sn->pipefs_sb_lock); + sn->gssd_running = 1; } /* -- cgit v0.10.2 From 2aed8b476f3478be140df92bbfb182978e835504 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 15 May 2013 10:27:32 -0700 Subject: SUNRPC: Convert auth_gss pipe detection to work in namespaces This seems to have been overlooked when we did the namespace conversion. If a container is running a legacy version of rpc.gssd then it will be disrupted if the global 'pipe_version' is set by a container running the new version of rpc.gssd. Signed-off-by: Trond Myklebust diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index 3aff72f..fc2f78d 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -87,8 +87,6 @@ struct gss_auth { }; /* pipe_version >= 0 if and only if someone has a pipe open. */ -static int pipe_version = -1; -static atomic_t pipe_users = ATOMIC_INIT(0); static DEFINE_SPINLOCK(pipe_version_lock); static struct rpc_wait_queue pipe_version_rpc_waitqueue; static DECLARE_WAIT_QUEUE_HEAD(pipe_version_waitqueue); @@ -268,24 +266,27 @@ struct gss_upcall_msg { char databuf[UPCALL_BUF_LEN]; }; -static int get_pipe_version(void) +static int get_pipe_version(struct net *net) { + struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); int ret; spin_lock(&pipe_version_lock); - if (pipe_version >= 0) { - atomic_inc(&pipe_users); - ret = pipe_version; + if (sn->pipe_version >= 0) { + atomic_inc(&sn->pipe_users); + ret = sn->pipe_version; } else ret = -EAGAIN; spin_unlock(&pipe_version_lock); return ret; } -static void put_pipe_version(void) +static void put_pipe_version(struct net *net) { - if (atomic_dec_and_lock(&pipe_users, &pipe_version_lock)) { - pipe_version = -1; + struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); + + if (atomic_dec_and_lock(&sn->pipe_users, &pipe_version_lock)) { + sn->pipe_version = -1; spin_unlock(&pipe_version_lock); } } @@ -293,9 +294,10 @@ static void put_pipe_version(void) static void gss_release_msg(struct gss_upcall_msg *gss_msg) { + struct net *net = rpc_net_ns(gss_msg->auth->client); if (!atomic_dec_and_test(&gss_msg->count)) return; - put_pipe_version(); + put_pipe_version(net); BUG_ON(!list_empty(&gss_msg->list)); if (gss_msg->ctx != NULL) gss_put_ctx(gss_msg->ctx); @@ -441,7 +443,10 @@ static void gss_encode_msg(struct gss_upcall_msg *gss_msg, struct rpc_clnt *clnt, const char *service_name) { - if (pipe_version == 0) + struct net *net = rpc_net_ns(clnt); + struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); + + if (sn->pipe_version == 0) gss_encode_v0_msg(gss_msg); else /* pipe_version == 1 */ gss_encode_v1_msg(gss_msg, clnt, service_name); @@ -457,7 +462,7 @@ gss_alloc_msg(struct gss_auth *gss_auth, struct rpc_clnt *clnt, gss_msg = kzalloc(sizeof(*gss_msg), GFP_NOFS); if (gss_msg == NULL) return ERR_PTR(-ENOMEM); - vers = get_pipe_version(); + vers = get_pipe_version(rpc_net_ns(clnt)); if (vers < 0) { kfree(gss_msg); return ERR_PTR(vers); @@ -581,8 +586,8 @@ retry: gss_msg = gss_setup_upcall(gss_auth->client, gss_auth, cred); if (PTR_ERR(gss_msg) == -EAGAIN) { err = wait_event_interruptible_timeout(pipe_version_waitqueue, - pipe_version >= 0, timeout); - if (pipe_version < 0) { + sn->pipe_version >= 0, timeout); + if (sn->pipe_version < 0) { if (err == 0) sn->gssd_running = 0; warn_gssd(); @@ -719,20 +724,22 @@ out: static int gss_pipe_open(struct inode *inode, int new_version) { + struct net *net = inode->i_sb->s_fs_info; + struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); int ret = 0; spin_lock(&pipe_version_lock); - if (pipe_version < 0) { + if (sn->pipe_version < 0) { /* First open of any gss pipe determines the version: */ - pipe_version = new_version; + sn->pipe_version = new_version; rpc_wake_up(&pipe_version_rpc_waitqueue); wake_up(&pipe_version_waitqueue); - } else if (pipe_version != new_version) { + } else if (sn->pipe_version != new_version) { /* Trying to open a pipe of a different version */ ret = -EBUSY; goto out; } - atomic_inc(&pipe_users); + atomic_inc(&sn->pipe_users); out: spin_unlock(&pipe_version_lock); return ret; @@ -752,6 +759,7 @@ static int gss_pipe_open_v1(struct inode *inode) static void gss_pipe_release(struct inode *inode) { + struct net *net = inode->i_sb->s_fs_info; struct rpc_pipe *pipe = RPC_I(inode)->pipe; struct gss_upcall_msg *gss_msg; @@ -770,7 +778,7 @@ restart: } spin_unlock(&pipe->lock); - put_pipe_version(); + put_pipe_version(net); } static void diff --git a/net/sunrpc/netns.h b/net/sunrpc/netns.h index 0827f64..74d948f 100644 --- a/net/sunrpc/netns.h +++ b/net/sunrpc/netns.h @@ -28,6 +28,8 @@ struct sunrpc_net { wait_queue_head_t gssp_wq; struct rpc_clnt *gssp_clnt; int use_gss_proxy; + int pipe_version; + atomic_t pipe_users; struct proc_dir_entry *use_gssp_proc; unsigned int gssd_running; diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c index a370762..e7ce4b3 100644 --- a/net/sunrpc/rpc_pipe.c +++ b/net/sunrpc/rpc_pipe.c @@ -1073,6 +1073,7 @@ void rpc_pipefs_init_net(struct net *net) mutex_init(&sn->pipefs_sb_lock); sn->gssd_running = 1; + sn->pipe_version = -1; } /* -- cgit v0.10.2 From 6ed0106667d76589cb648c27edb4f4ffbf9d59ca Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Thu, 16 May 2013 20:48:49 +0900 Subject: tracing: Return -EBUSY when event_enable_func() fails to get module Since try_module_get() returns false( = 0) when it fails to pindown a module, event_enable_func() returns 0 which means "succeed". This can cause a kernel panic when the entry is removed, because the event is already released. This fixes the bug by returning -EBUSY, because the reason why it fails is that the module is being removed at that time. Link: http://lkml.kernel.org/r/20130516114848.13508.97899.stgit@mhiramat-M0-7522 Cc: Srikar Dronamraju Cc: Oleg Nesterov Cc: Tom Zanussi Cc: Frederic Weisbecker Cc: Ingo Molnar Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c index 7a0cf68..27963e2 100644 --- a/kernel/trace/trace_events.c +++ b/kernel/trace/trace_events.c @@ -2072,8 +2072,10 @@ event_enable_func(struct ftrace_hash *hash, out_reg: /* Don't let event modules unload while probe registered */ ret = try_module_get(file->event_call->mod); - if (!ret) + if (!ret) { + ret = -EBUSY; goto out_free; + } ret = __ftrace_event_enable_disable(file, 1, 1); if (ret < 0) -- cgit v0.10.2 From 304e71e0ad4125c29a0731491b75c3b83530d616 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 14 May 2013 20:28:15 -0700 Subject: ARM: dts: Fix musb interrupt for device tree booting Commit ad871c10 (ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+ boards) added support for MUSB on omap3 for device tree, but added the interrupts the wrong way probably as they were copied from the omap4.dtsi file. On omap3 we have TI specific interrupt controller, not GIC. Fix this by specifying the interrupt following the TI INTC binding. Without this fix MUSB won't work as it is trying to use irq0 instead of irq92. Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 82a404d..99ba6e1 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -516,7 +516,7 @@ usb_otg_hs: usb_otg_hs@480ab000 { compatible = "ti,omap3-musb"; reg = <0x480ab000 0x1000>; - interrupts = <0 92 0x4>, <0 93 0x4>; + interrupts = <92>, <93>; interrupt-names = "mc", "dma"; ti,hwmods = "usb_otg_hs"; multipoint = <1>; -- cgit v0.10.2 From bc6bcb59dd7c184d229f9e86d08aa56059938a4c Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 7 May 2013 03:22:18 +0200 Subject: netfilter: xt_TCPOPTSTRIP: fix possible mangling beyond packet boundary This target assumes that tcph->doff is well-formed, that may be well not the case. Add extra sanity checkings to avoid possible crash due to read/write out of the real packet boundary. After this patch, the default action on malformed TCP packets is to drop them. Moreover, fragments are skipped. Reported-by: Rafal Kupka Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/xt_TCPOPTSTRIP.c b/net/netfilter/xt_TCPOPTSTRIP.c index 25fd1c4..1eb1a44 100644 --- a/net/netfilter/xt_TCPOPTSTRIP.c +++ b/net/netfilter/xt_TCPOPTSTRIP.c @@ -30,17 +30,28 @@ static inline unsigned int optlen(const u_int8_t *opt, unsigned int offset) static unsigned int tcpoptstrip_mangle_packet(struct sk_buff *skb, - const struct xt_tcpoptstrip_target_info *info, + const struct xt_action_param *par, unsigned int tcphoff, unsigned int minlen) { + const struct xt_tcpoptstrip_target_info *info = par->targinfo; unsigned int optl, i, j; struct tcphdr *tcph; u_int16_t n, o; u_int8_t *opt; + int len; + + /* This is a fragment, no TCP header is available */ + if (par->fragoff != 0) + return XT_CONTINUE; if (!skb_make_writable(skb, skb->len)) return NF_DROP; + len = skb->len - tcphoff; + if (len < (int)sizeof(struct tcphdr) || + tcp_hdr(skb)->doff * 4 > len) + return NF_DROP; + tcph = (struct tcphdr *)(skb_network_header(skb) + tcphoff); opt = (u_int8_t *)tcph; @@ -76,7 +87,7 @@ tcpoptstrip_mangle_packet(struct sk_buff *skb, static unsigned int tcpoptstrip_tg4(struct sk_buff *skb, const struct xt_action_param *par) { - return tcpoptstrip_mangle_packet(skb, par->targinfo, ip_hdrlen(skb), + return tcpoptstrip_mangle_packet(skb, par, ip_hdrlen(skb), sizeof(struct iphdr) + sizeof(struct tcphdr)); } @@ -94,7 +105,7 @@ tcpoptstrip_tg6(struct sk_buff *skb, const struct xt_action_param *par) if (tcphoff < 0) return NF_DROP; - return tcpoptstrip_mangle_packet(skb, par->targinfo, tcphoff, + return tcpoptstrip_mangle_packet(skb, par, tcphoff, sizeof(*ipv6h) + sizeof(struct tcphdr)); } #endif -- cgit v0.10.2 From b0222afa5bab555c378d2ab82b32078c9e942b3a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 8 May 2013 22:23:42 +0200 Subject: mfd: si476x: Do not use binary constants Gcc < 4.3 doesn't understand binary constanrs (0b*): drivers/mfd/si476x-cmd.c:153:22: error: invalid suffix "b11111" on integer constant drivers/mfd/si476x-cmd.c:775:20: error: invalid suffix "b00001000" on integer constant drivers/mfd/si476x-cmd.c:776:20: error: invalid suffix "b00000100" on integer constant drivers/mfd/si476x-cmd.c:777:21: error: invalid suffix "b00000010" on integer constant drivers/mfd/si476x-cmd.c:778:21: error: invalid suffix "b00000001" on integer constant drivers/mfd/si476x-cmd.c:780:17: error: invalid suffix "b10000000" on integer constant drivers/mfd/si476x-cmd.c:781:22: error: invalid suffix "b00100000" on integer constant ... Hence use hexadecimal constants (0x*) instead. Signed-off-by: Geert Uytterhoeven Acked-by: Andrey Smirnov Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/si476x-cmd.c b/drivers/mfd/si476x-cmd.c index de48b4e..f12f016 100644 --- a/drivers/mfd/si476x-cmd.c +++ b/drivers/mfd/si476x-cmd.c @@ -150,7 +150,7 @@ enum si476x_acf_status_report_bits { SI476X_ACF_SOFTMUTE_INT = (1 << 0), SI476X_ACF_SMUTE = (1 << 0), - SI476X_ACF_SMATTN = 0b11111, + SI476X_ACF_SMATTN = 0x1f, SI476X_ACF_PILOT = (1 << 7), SI476X_ACF_STBLEND = ~SI476X_ACF_PILOT, }; @@ -772,16 +772,16 @@ int si476x_core_cmd_am_rsq_status(struct si476x_core *core, if (!report) return err; - report->snrhint = 0b00001000 & resp[1]; - report->snrlint = 0b00000100 & resp[1]; - report->rssihint = 0b00000010 & resp[1]; - report->rssilint = 0b00000001 & resp[1]; + report->snrhint = 0x08 & resp[1]; + report->snrlint = 0x04 & resp[1]; + report->rssihint = 0x02 & resp[1]; + report->rssilint = 0x01 & resp[1]; - report->bltf = 0b10000000 & resp[2]; - report->snr_ready = 0b00100000 & resp[2]; - report->rssiready = 0b00001000 & resp[2]; - report->afcrl = 0b00000010 & resp[2]; - report->valid = 0b00000001 & resp[2]; + report->bltf = 0x80 & resp[2]; + report->snr_ready = 0x20 & resp[2]; + report->rssiready = 0x08 & resp[2]; + report->afcrl = 0x02 & resp[2]; + report->valid = 0x01 & resp[2]; report->readfreq = be16_to_cpup((__be16 *)(resp + 3)); report->freqoff = resp[5]; @@ -931,26 +931,26 @@ int si476x_core_cmd_fm_rds_status(struct si476x_core *core, if (err < 0 || report == NULL) return err; - report->rdstpptyint = 0b00010000 & resp[1]; - report->rdspiint = 0b00001000 & resp[1]; - report->rdssyncint = 0b00000010 & resp[1]; - report->rdsfifoint = 0b00000001 & resp[1]; + report->rdstpptyint = 0x10 & resp[1]; + report->rdspiint = 0x08 & resp[1]; + report->rdssyncint = 0x02 & resp[1]; + report->rdsfifoint = 0x01 & resp[1]; - report->tpptyvalid = 0b00010000 & resp[2]; - report->pivalid = 0b00001000 & resp[2]; - report->rdssync = 0b00000010 & resp[2]; - report->rdsfifolost = 0b00000001 & resp[2]; + report->tpptyvalid = 0x10 & resp[2]; + report->pivalid = 0x08 & resp[2]; + report->rdssync = 0x02 & resp[2]; + report->rdsfifolost = 0x01 & resp[2]; - report->tp = 0b00100000 & resp[3]; - report->pty = 0b00011111 & resp[3]; + report->tp = 0x20 & resp[3]; + report->pty = 0x1f & resp[3]; report->pi = be16_to_cpup((__be16 *)(resp + 4)); report->rdsfifoused = resp[6]; - report->ble[V4L2_RDS_BLOCK_A] = 0b11000000 & resp[7]; - report->ble[V4L2_RDS_BLOCK_B] = 0b00110000 & resp[7]; - report->ble[V4L2_RDS_BLOCK_C] = 0b00001100 & resp[7]; - report->ble[V4L2_RDS_BLOCK_D] = 0b00000011 & resp[7]; + report->ble[V4L2_RDS_BLOCK_A] = 0xc0 & resp[7]; + report->ble[V4L2_RDS_BLOCK_B] = 0x30 & resp[7]; + report->ble[V4L2_RDS_BLOCK_C] = 0x0c & resp[7]; + report->ble[V4L2_RDS_BLOCK_D] = 0x03 & resp[7]; report->rds[V4L2_RDS_BLOCK_A].block = V4L2_RDS_BLOCK_A; report->rds[V4L2_RDS_BLOCK_A].msb = resp[8]; @@ -1005,7 +1005,7 @@ int si476x_core_cmd_fm_phase_diversity(struct si476x_core *core, { u8 resp[CMD_FM_PHASE_DIVERSITY_NRESP]; const u8 args[CMD_FM_PHASE_DIVERSITY_NARGS] = { - mode & 0b111, + mode & 0x07, }; return si476x_core_send_command(core, CMD_FM_PHASE_DIVERSITY, @@ -1162,7 +1162,7 @@ static int si476x_core_cmd_am_tune_freq_a20(struct si476x_core *core, const int am_freq = tuneargs->freq; u8 resp[CMD_AM_TUNE_FREQ_NRESP]; const u8 args[CMD_AM_TUNE_FREQ_NARGS] = { - (tuneargs->zifsr << 6) | (tuneargs->injside & 0b11), + (tuneargs->zifsr << 6) | (tuneargs->injside & 0x03), msb(am_freq), lsb(am_freq), }; @@ -1197,18 +1197,18 @@ static int si476x_core_cmd_fm_rsq_status_a10(struct si476x_core *core, if (err < 0 || report == NULL) return err; - report->multhint = 0b10000000 & resp[1]; - report->multlint = 0b01000000 & resp[1]; - report->snrhint = 0b00001000 & resp[1]; - report->snrlint = 0b00000100 & resp[1]; - report->rssihint = 0b00000010 & resp[1]; - report->rssilint = 0b00000001 & resp[1]; + report->multhint = 0x80 & resp[1]; + report->multlint = 0x40 & resp[1]; + report->snrhint = 0x08 & resp[1]; + report->snrlint = 0x04 & resp[1]; + report->rssihint = 0x02 & resp[1]; + report->rssilint = 0x01 & resp[1]; - report->bltf = 0b10000000 & resp[2]; - report->snr_ready = 0b00100000 & resp[2]; - report->rssiready = 0b00001000 & resp[2]; - report->afcrl = 0b00000010 & resp[2]; - report->valid = 0b00000001 & resp[2]; + report->bltf = 0x80 & resp[2]; + report->snr_ready = 0x20 & resp[2]; + report->rssiready = 0x08 & resp[2]; + report->afcrl = 0x02 & resp[2]; + report->valid = 0x01 & resp[2]; report->readfreq = be16_to_cpup((__be16 *)(resp + 3)); report->freqoff = resp[5]; @@ -1251,18 +1251,18 @@ static int si476x_core_cmd_fm_rsq_status_a20(struct si476x_core *core, if (err < 0 || report == NULL) return err; - report->multhint = 0b10000000 & resp[1]; - report->multlint = 0b01000000 & resp[1]; - report->snrhint = 0b00001000 & resp[1]; - report->snrlint = 0b00000100 & resp[1]; - report->rssihint = 0b00000010 & resp[1]; - report->rssilint = 0b00000001 & resp[1]; + report->multhint = 0x80 & resp[1]; + report->multlint = 0x40 & resp[1]; + report->snrhint = 0x08 & resp[1]; + report->snrlint = 0x04 & resp[1]; + report->rssihint = 0x02 & resp[1]; + report->rssilint = 0x01 & resp[1]; - report->bltf = 0b10000000 & resp[2]; - report->snr_ready = 0b00100000 & resp[2]; - report->rssiready = 0b00001000 & resp[2]; - report->afcrl = 0b00000010 & resp[2]; - report->valid = 0b00000001 & resp[2]; + report->bltf = 0x80 & resp[2]; + report->snr_ready = 0x20 & resp[2]; + report->rssiready = 0x08 & resp[2]; + report->afcrl = 0x02 & resp[2]; + report->valid = 0x01 & resp[2]; report->readfreq = be16_to_cpup((__be16 *)(resp + 3)); report->freqoff = resp[5]; @@ -1306,19 +1306,19 @@ static int si476x_core_cmd_fm_rsq_status_a30(struct si476x_core *core, if (err < 0 || report == NULL) return err; - report->multhint = 0b10000000 & resp[1]; - report->multlint = 0b01000000 & resp[1]; - report->snrhint = 0b00001000 & resp[1]; - report->snrlint = 0b00000100 & resp[1]; - report->rssihint = 0b00000010 & resp[1]; - report->rssilint = 0b00000001 & resp[1]; - - report->bltf = 0b10000000 & resp[2]; - report->snr_ready = 0b00100000 & resp[2]; - report->rssiready = 0b00001000 & resp[2]; - report->injside = 0b00000100 & resp[2]; - report->afcrl = 0b00000010 & resp[2]; - report->valid = 0b00000001 & resp[2]; + report->multhint = 0x80 & resp[1]; + report->multlint = 0x40 & resp[1]; + report->snrhint = 0x08 & resp[1]; + report->snrlint = 0x04 & resp[1]; + report->rssihint = 0x02 & resp[1]; + report->rssilint = 0x01 & resp[1]; + + report->bltf = 0x80 & resp[2]; + report->snr_ready = 0x20 & resp[2]; + report->rssiready = 0x08 & resp[2]; + report->injside = 0x04 & resp[2]; + report->afcrl = 0x02 & resp[2]; + report->valid = 0x01 & resp[2]; report->readfreq = be16_to_cpup((__be16 *)(resp + 3)); report->freqoff = resp[5]; -- cgit v0.10.2 From c34924b9503ca73ae36573d6ce08a34677c05081 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 8 May 2013 23:37:45 +0200 Subject: mfd: cros_ec_spi: Use %z to format pointer differences MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Before commit 5c29e47e6ac55b63c76999eb5b283a80208726c5 ("mfd: cros_ec_spi: Warnings fix"), 64-bit compiles gave the following warnings: drivers/mfd/cros_ec_spi.c: In function 'cros_ec_spi_receive_response': drivers/mfd/cros_ec_spi.c:123:5: warning: format '%d' expects argument of type 'int', but argument 4 has type 'long int' [-Wformat] drivers/mfd/cros_ec_spi.c:157:3: warning: format '%d' expects argument of type 'int', but argument 6 has type 'long int' [-Wformat] drivers/mfd/cros_ec_spi.c:181:2: warning: format '%d' expects argument of type 'int', but argument 4 has type 'long int' [-Wformat] After that commit, 32-bit compiles give: drivers/mfd/cros_ec_spi.c: In function ‘cros_ec_spi_receive_response’: drivers/mfd/cros_ec_spi.c:123: warning: format ‘%ld’ expects type ‘long int’, but argument 4 has type ‘int’ drivers/mfd/cros_ec_spi.c:157: warning: format ‘%ld’ expects type ‘long int’, but argument 6 has type ‘int’ drivers/mfd/cros_ec_spi.c:181: warning: format ‘%ld’ expects type ‘long int’, but argument 4 has type ‘int’ Use %z to format pointer differences to kill the warnings on both 32-bit and 64-bit. Signed-off-by: Geert Uytterhoeven Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/cros_ec_spi.c b/drivers/mfd/cros_ec_spi.c index 19193cf..367ccb5 100644 --- a/drivers/mfd/cros_ec_spi.c +++ b/drivers/mfd/cros_ec_spi.c @@ -120,7 +120,7 @@ static int cros_ec_spi_receive_response(struct cros_ec_device *ec_dev, for (end = ptr + EC_MSG_PREAMBLE_COUNT; ptr != end; ptr++) { if (*ptr == EC_MSG_HEADER) { - dev_dbg(ec_dev->dev, "msg found at %ld\n", + dev_dbg(ec_dev->dev, "msg found at %zd\n", ptr - ec_dev->din); break; } @@ -154,7 +154,7 @@ static int cros_ec_spi_receive_response(struct cros_ec_device *ec_dev, * maximum-supported transfer size. */ todo = min(need_len, 256); - dev_dbg(ec_dev->dev, "loop, todo=%d, need_len=%d, ptr=%ld\n", + dev_dbg(ec_dev->dev, "loop, todo=%d, need_len=%d, ptr=%zd\n", todo, need_len, ptr - ec_dev->din); memset(&trans, '\0', sizeof(trans)); @@ -178,7 +178,7 @@ static int cros_ec_spi_receive_response(struct cros_ec_device *ec_dev, need_len -= todo; } - dev_dbg(ec_dev->dev, "loop done, ptr=%ld\n", ptr - ec_dev->din); + dev_dbg(ec_dev->dev, "loop done, ptr=%zd\n", ptr - ec_dev->din); return 0; } -- cgit v0.10.2 From 151978bf671dd2f741eab79c91d7d74bad49929c Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 9 May 2013 14:01:05 +0200 Subject: mfd: si476x: Use get_unaligned_be16() for unaligned be16 loads Loading be16 values from byte buffers may cause unaligned accesses, so use get_unaligned_be16() to avoid problems on architectures that do not support these. Signed-off-by: Geert Uytterhoeven Acked-by: Andrey Smirnov Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/si476x-cmd.c b/drivers/mfd/si476x-cmd.c index f12f016..6f1ef63 100644 --- a/drivers/mfd/si476x-cmd.c +++ b/drivers/mfd/si476x-cmd.c @@ -29,6 +29,8 @@ #include +#include + #define msb(x) ((u8)((u16) x >> 8)) #define lsb(x) ((u8)((u16) x & 0x00FF)) @@ -483,7 +485,7 @@ int si476x_core_cmd_get_property(struct si476x_core *core, u16 property) if (err < 0) return err; else - return be16_to_cpup((__be16 *)(resp + 2)); + return get_unaligned_be16(resp + 2); } EXPORT_SYMBOL_GPL(si476x_core_cmd_get_property); @@ -783,7 +785,7 @@ int si476x_core_cmd_am_rsq_status(struct si476x_core *core, report->afcrl = 0x02 & resp[2]; report->valid = 0x01 & resp[2]; - report->readfreq = be16_to_cpup((__be16 *)(resp + 3)); + report->readfreq = get_unaligned_be16(resp + 3); report->freqoff = resp[5]; report->rssi = resp[6]; report->snr = resp[7]; @@ -944,7 +946,7 @@ int si476x_core_cmd_fm_rds_status(struct si476x_core *core, report->tp = 0x20 & resp[3]; report->pty = 0x1f & resp[3]; - report->pi = be16_to_cpup((__be16 *)(resp + 4)); + report->pi = get_unaligned_be16(resp + 4); report->rdsfifoused = resp[6]; report->ble[V4L2_RDS_BLOCK_A] = 0xc0 & resp[7]; @@ -991,9 +993,9 @@ int si476x_core_cmd_fm_rds_blockcount(struct si476x_core *core, SI476X_DEFAULT_TIMEOUT); if (!err) { - report->expected = be16_to_cpup((__be16 *)(resp + 2)); - report->received = be16_to_cpup((__be16 *)(resp + 4)); - report->uncorrectable = be16_to_cpup((__be16 *)(resp + 6)); + report->expected = get_unaligned_be16(resp + 2); + report->received = get_unaligned_be16(resp + 4); + report->uncorrectable = get_unaligned_be16(resp + 6); } return err; @@ -1210,7 +1212,7 @@ static int si476x_core_cmd_fm_rsq_status_a10(struct si476x_core *core, report->afcrl = 0x02 & resp[2]; report->valid = 0x01 & resp[2]; - report->readfreq = be16_to_cpup((__be16 *)(resp + 3)); + report->readfreq = get_unaligned_be16(resp + 3); report->freqoff = resp[5]; report->rssi = resp[6]; report->snr = resp[7]; @@ -1218,7 +1220,7 @@ static int si476x_core_cmd_fm_rsq_status_a10(struct si476x_core *core, report->hassi = resp[10]; report->mult = resp[11]; report->dev = resp[12]; - report->readantcap = be16_to_cpup((__be16 *)(resp + 13)); + report->readantcap = get_unaligned_be16(resp + 13); report->assi = resp[15]; report->usn = resp[16]; @@ -1264,7 +1266,7 @@ static int si476x_core_cmd_fm_rsq_status_a20(struct si476x_core *core, report->afcrl = 0x02 & resp[2]; report->valid = 0x01 & resp[2]; - report->readfreq = be16_to_cpup((__be16 *)(resp + 3)); + report->readfreq = get_unaligned_be16(resp + 3); report->freqoff = resp[5]; report->rssi = resp[6]; report->snr = resp[7]; @@ -1272,7 +1274,7 @@ static int si476x_core_cmd_fm_rsq_status_a20(struct si476x_core *core, report->hassi = resp[10]; report->mult = resp[11]; report->dev = resp[12]; - report->readantcap = be16_to_cpup((__be16 *)(resp + 13)); + report->readantcap = get_unaligned_be16(resp + 13); report->assi = resp[15]; report->usn = resp[16]; @@ -1320,7 +1322,7 @@ static int si476x_core_cmd_fm_rsq_status_a30(struct si476x_core *core, report->afcrl = 0x02 & resp[2]; report->valid = 0x01 & resp[2]; - report->readfreq = be16_to_cpup((__be16 *)(resp + 3)); + report->readfreq = get_unaligned_be16(resp + 3); report->freqoff = resp[5]; report->rssi = resp[6]; report->snr = resp[7]; @@ -1329,7 +1331,7 @@ static int si476x_core_cmd_fm_rsq_status_a30(struct si476x_core *core, report->hassi = resp[10]; report->mult = resp[11]; report->dev = resp[12]; - report->readantcap = be16_to_cpup((__be16 *)(resp + 13)); + report->readantcap = get_unaligned_be16(resp + 13); report->assi = resp[15]; report->usn = resp[16]; @@ -1337,7 +1339,7 @@ static int si476x_core_cmd_fm_rsq_status_a30(struct si476x_core *core, report->rdsdev = resp[18]; report->assidev = resp[19]; report->strongdev = resp[20]; - report->rdspi = be16_to_cpup((__be16 *)(resp + 21)); + report->rdspi = get_unaligned_be16(resp + 21); return err; } -- cgit v0.10.2 From fca8c90d519dedd4f4b19901d005c243f7f0bf2e Mon Sep 17 00:00:00 2001 From: "Chew, Chiau Ee" Date: Thu, 16 May 2013 15:33:29 +0800 Subject: ata_piix: add PCI IDs for Intel BayTail Adds IDE-mode SATA Device IDs for the Intel BayTrail platform. Signed-off-by: Chew, Chiau Ee Signed-off-by: Artem Bityutskiy Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 26bda6e..9a8a674 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -151,6 +151,7 @@ enum piix_controller_ids { piix_pata_vmw, /* PIIX4 for VMware, spurious DMA_ERR */ ich8_sata_snb, ich8_2port_sata_snb, + ich8_2port_sata_byt, }; struct piix_map_db { @@ -334,6 +335,9 @@ static const struct pci_device_id piix_pci_tbl[] = { { 0x8086, 0x8d60, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, /* SATA Controller IDE (Wellsburg) */ { 0x8086, 0x8d68, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (BayTrail) */ + { 0x8086, 0x0F20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_byt }, + { 0x8086, 0x0F21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_byt }, { } /* terminate list */ }; @@ -441,6 +445,7 @@ static const struct piix_map_db *piix_map_db_table[] = { [tolapai_sata] = &tolapai_map_db, [ich8_sata_snb] = &ich8_map_db, [ich8_2port_sata_snb] = &ich8_2port_map_db, + [ich8_2port_sata_byt] = &ich8_2port_map_db, }; static struct pci_bits piix_enable_bits[] = { @@ -1254,6 +1259,16 @@ static struct ata_port_info piix_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, + + [ich8_2port_sata_byt] = + { + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR | PIIX_FLAG_PIO16, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &piix_sata_ops, + }, + }; #define AHCI_PCI_BAR 5 -- cgit v0.10.2 From 0f497039276fa2ca2ca324236848bb15c8c775dc Mon Sep 17 00:00:00 2001 From: jean-philippe francois Date: Thu, 16 May 2013 11:25:07 -0700 Subject: ARM: OMAP: fix __init section mismatch for _enable_preprogram _enable_preprogram is marked as __init, but is called from _enable which is not. Without this patch, the board oopses after init. Tested on custom hardware and on beagle board xM. Otherwise we can get: Unable to handle kernel paging request at virtual address 000b0012 pgd = cf968000 *pgd=8fb06831, *pte=00000000, *ppte=00000000 PREEMPT ARM Modules linked in: CPU: 0 Not tainted (3.9.0 #2) PC is at _enable_preprogram+0x1c/0x24 LR is at omap_hwmod_enable+0x34/0x60 psr: 80000093 sp : cf95de08 ip : 00002de5 fp : bec33d4c r10: 00000000 r9 : 00000002 r8 : b6dd2c78 r7 : 00000004 r6 : 00000000 r5 : a0000013 r4 : cf95c000 r3 : 00000000 r2 : b6dd2c7c r1 : 00000000 r0 : 000b0012 Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 8f968019 DAC: 00000015 Process otpcmd (pid: 607, stack limit = 0xcf95c230) Stack: (0xcf95de08 to 0xcf95e000) de00: 00000001 cf91f840 00000000 c001d6fc 00000002 cf91f840 de20: cf8f7e10 c001de54 cf8f7e10 c001de78 c001de68 c01d5e80 00000000 cf8f7e10 de40: cf8f7e10 c01d5f28 cf8f7e10 c0530d30 00000000 c01d6f28 00000000 c0088664 de60: b6ea1000 cfb05284 cf95c000 00000001 cf95c000 60000013 00000001 cf95dee4 de80: cf870050 c01d7308 cf870010 cf870050 00000001 c0278b14 c0526f28 00000000 dea0: cf870050 ffff8e18 00000001 cf95dee4 00000000 c0274f7c cf870050 00000001 dec0: cf95dee4 cf1d8484 000000e0 c0276464 00000008 cf9c0000 00000007 c0276980 dee0: cf9c0000 00000064 00000008 cf1d8404 cf1d8400 c01cc05c 0000270a cf1d8504 df00: 00000023 cf1d8484 00000007 c01cc670 00000bdd 00000001 00000000 cf449e60 df20: cf1dde70 cf1d8400 bec33d18 cf1d8504 c0246f00 00000003 cf95c000 00000000 df40: bec33d4c c01cd078 00000003 cf1d8504 00000081 c01cbcb8 bec33d18 00000003 df60: bec33d18 c00a9034 00002000 c00a9c68 cf92fe00 00000003 c0246f00 cf92fe00 df80: 00000000 c00a9cb0 00000003 00000000 00008e70 00000000 b6f17000 00000036 dfa0: c000e484 c000e300 00008e70 00000000 00000003 c0246f00 bec33d18 bec33d18 dfc0: 00008e70 00000000 b6f17000 00000036 00000000 00000000 b6f6d000 bec33d4c dfe0: b6ea1bd0 bec33d0c 00008c9c b6ea1bdc 60000010 00000003 00000000 00000000 (_omap_device_enable_hwmods+0x20/0x34) (omap_device_enable+0x3c/0x50) (_od_runtime_resume+0x10/0x1c) (__rpm_callback+0x54/0x98) (rpm_callback+0x64/0x7c) (rpm_resume+0x434/0x554) (__pm_runtime_resume+0x48/0x74) (omap_i2c_xfer+0x28/0xe8) (__i2c_transfer+0x3c/0x78) (i2c_transfer+0x6c/0xc0) (i2c_master_send+0x38/0x48) (sha204p_send_command+0x60/0x9c) (sha204c_send_and_receive+0x5c/0x1e0) (sha204m_read+0x94/0xa0) (otp_do_read+0x50/0xa4) (vfs_ioctl+0x24/0x40) (do_vfs_ioctl+0x1b0/0x1c0) (sys_ioctl+0x38/0x54) (ret_fast_syscall+0x0/0x30) Code: e1a08002 ea000009 e598003c e592c05c (e7904003) Cc: stable@vger.kernel.org Signed-off-by: Jean-Philippe Fran=C3=A7ois Acked-by: Kevin Hilman [tony@atomide.com: updated description with oops] Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index d25a95f..e328988 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2065,7 +2065,7 @@ static int _omap4_get_context_lost(struct omap_hwmod *oh) * do so is present in the hwmod data, then call it and pass along the * return value; otherwise, return 0. */ -static int __init _enable_preprogram(struct omap_hwmod *oh) +static int _enable_preprogram(struct omap_hwmod *oh) { if (!oh->class->enable_preprogram) return 0; -- cgit v0.10.2 From a8b09c52a66e801d87704cfebf57958b1991ab86 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 16 May 2013 11:25:07 -0700 Subject: ARM: OMAP: fix error return code in omap1_system_dma_init() Fix to return -ENOMEM in the d->chan alloc error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index 68ab858..a94b3a7 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -345,6 +345,7 @@ static int __init omap1_system_dma_init(void) dev_err(&pdev->dev, "%s: Memory allocation failed for d->chan!\n", __func__); + ret = -ENOMEM; goto exit_release_d; } -- cgit v0.10.2 From a545ec160afea245939290e7f616f68de906a85c Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 16 May 2013 11:25:07 -0700 Subject: ARM: OMAP2+: Add missing CONFIG_ARCH_MULTI_V6=y to omap2plus_defconfig omap2plus_defconfig is missing CONFIG_ARCH_MULTI_V6. This results in undefined instruction traps in u-boot (and boot failures) on OMAP2xxx SoCs, which are ARM11-based. Fix by setting CONFIG_ARCH_MULTI_V6. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index c1ef64b..f590902 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -20,6 +20,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_ARCH_MULTI_V6=y CONFIG_ARCH_OMAP2PLUS=y CONFIG_OMAP_RESET_CLOCKS=y CONFIG_OMAP_MUX_DEBUG=y -- cgit v0.10.2 From 8ea6cd7af124ad070b44a7f60e225e45e3f38f79 Mon Sep 17 00:00:00 2001 From: David Daney Date: Mon, 13 May 2013 13:56:43 -0700 Subject: Revert "MIPS: microMIPS: Support dynamic ASID sizing." This reverts commit f6b06d9361a008afb93b97fb3683a6e92d69d0f4. The next revert depends on this one, so this has to go too. Signed-off-by: David Daney Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: "Steven J. Hill" Cc: David Daney Patchwork: https://patchwork.linux-mips.org/patch/5241/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 4d46d37..2ad41e9 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -309,32 +309,13 @@ static int check_for_high_segbits __cpuinitdata; static void __cpuinit insn_fixup(unsigned int **start, unsigned int **stop, unsigned int i_const) { - unsigned int **p; + unsigned int **p, *ip; for (p = start; p < stop; p++) { -#ifndef CONFIG_CPU_MICROMIPS - unsigned int *ip; - ip = *p; *ip = (*ip & 0xffff0000) | i_const; -#else - unsigned short *ip; - - ip = ((unsigned short *)((unsigned int)*p - 1)); - if ((*ip & 0xf000) == 0x4000) { - *ip &= 0xfff1; - *ip |= (i_const << 1); - } else if ((*ip & 0xf000) == 0x6000) { - *ip &= 0xfff1; - *ip |= ((i_const >> 2) << 1); - } else { - ip++; - *ip = i_const; - } -#endif - local_flush_icache_range((unsigned long)ip, - (unsigned long)ip + sizeof(*ip)); } + local_flush_icache_range((unsigned long)*p, (unsigned long)((*p) + 1)); } #define asid_insn_fixup(section, const) \ @@ -354,14 +335,6 @@ static void __cpuinit setup_asid(unsigned int inc, unsigned int mask, extern asmlinkage void handle_ri_rdhwr_vivt(void); unsigned long *vivt_exc; -#ifdef CONFIG_CPU_MICROMIPS - /* - * Worst case optimised microMIPS addiu instructions support - * only a 3-bit immediate value. - */ - if(inc > 7) - panic("Invalid ASID increment value!"); -#endif asid_insn_fixup(__asid_inc, inc); asid_insn_fixup(__asid_mask, mask); asid_insn_fixup(__asid_version_mask, version_mask); @@ -369,9 +342,6 @@ static void __cpuinit setup_asid(unsigned int inc, unsigned int mask, /* Patch up the 'handle_ri_rdhwr_vivt' handler. */ vivt_exc = (unsigned long *) &handle_ri_rdhwr_vivt; -#ifdef CONFIG_CPU_MICROMIPS - vivt_exc = (unsigned long *)((unsigned long) vivt_exc - 1); -#endif vivt_exc++; *vivt_exc = (*vivt_exc & ~mask) | mask; -- cgit v0.10.2 From 48c4ac976ae995f263cde8f09578de86bc8e9f1d Mon Sep 17 00:00:00 2001 From: David Daney Date: Mon, 13 May 2013 13:56:44 -0700 Subject: Revert "MIPS: Allow ASID size to be determined at boot time." This reverts commit d532f3d26716a39dfd4b88d687bd344fbe77e390. The original commit has several problems: 1) Doesn't work with 64-bit kernels. 2) Calls TLBMISS_HANDLER_SETUP() before the code is generated. 3) Calls TLBMISS_HANDLER_SETUP() twice in per_cpu_trap_init() when only one call is needed. [ralf@linux-mips.org: Also revert the bits of the ASID patch which were hidden in the KVM merge.] Signed-off-by: David Daney Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: "Steven J. Hill" Cc: David Daney Patchwork: https://patchwork.linux-mips.org/patch/5242/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/kvm_host.h b/arch/mips/include/asm/kvm_host.h index e68781e..143875c 100644 --- a/arch/mips/include/asm/kvm_host.h +++ b/arch/mips/include/asm/kvm_host.h @@ -336,7 +336,7 @@ enum emulation_result { #define VPN2_MASK 0xffffe000 #define TLB_IS_GLOBAL(x) (((x).tlb_lo0 & MIPS3_PG_G) && ((x).tlb_lo1 & MIPS3_PG_G)) #define TLB_VPN2(x) ((x).tlb_hi & VPN2_MASK) -#define TLB_ASID(x) (ASID_MASK((x).tlb_hi)) +#define TLB_ASID(x) ((x).tlb_hi & ASID_MASK) #define TLB_IS_VALID(x, va) (((va) & (1 << PAGE_SHIFT)) ? ((x).tlb_lo1 & MIPS3_PG_V) : ((x).tlb_lo0 & MIPS3_PG_V)) struct kvm_mips_tlb { diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h index 1554721..8201160 100644 --- a/arch/mips/include/asm/mmu_context.h +++ b/arch/mips/include/asm/mmu_context.h @@ -67,68 +67,45 @@ extern unsigned long pgd_current[]; TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir) #endif #endif /* CONFIG_MIPS_PGD_C0_CONTEXT*/ +#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) -#define ASID_INC(asid) \ -({ \ - unsigned long __asid = asid; \ - __asm__("1:\taddiu\t%0,1\t\t\t\t# patched\n\t" \ - ".section\t__asid_inc,\"a\"\n\t" \ - ".word\t1b\n\t" \ - ".previous" \ - :"=r" (__asid) \ - :"0" (__asid)); \ - __asid; \ -}) -#define ASID_MASK(asid) \ -({ \ - unsigned long __asid = asid; \ - __asm__("1:\tandi\t%0,%1,0xfc0\t\t\t# patched\n\t" \ - ".section\t__asid_mask,\"a\"\n\t" \ - ".word\t1b\n\t" \ - ".previous" \ - :"=r" (__asid) \ - :"r" (__asid)); \ - __asid; \ -}) -#define ASID_VERSION_MASK \ -({ \ - unsigned long __asid; \ - __asm__("1:\taddiu\t%0,$0,0xff00\t\t\t\t# patched\n\t" \ - ".section\t__asid_version_mask,\"a\"\n\t" \ - ".word\t1b\n\t" \ - ".previous" \ - :"=r" (__asid)); \ - __asid; \ -}) -#define ASID_FIRST_VERSION \ -({ \ - unsigned long __asid = asid; \ - __asm__("1:\tli\t%0,0x100\t\t\t\t# patched\n\t" \ - ".section\t__asid_first_version,\"a\"\n\t" \ - ".word\t1b\n\t" \ - ".previous" \ - :"=r" (__asid)); \ - __asid; \ -}) - -#define ASID_FIRST_VERSION_R3000 0x1000 -#define ASID_FIRST_VERSION_R4000 0x100 -#define ASID_FIRST_VERSION_R8000 0x1000 -#define ASID_FIRST_VERSION_RM9000 0x1000 +#define ASID_INC 0x40 +#define ASID_MASK 0xfc0 + +#elif defined(CONFIG_CPU_R8000) + +#define ASID_INC 0x10 +#define ASID_MASK 0xff0 + +#elif defined(CONFIG_MIPS_MT_SMTC) + +#define ASID_INC 0x1 +extern unsigned long smtc_asid_mask; +#define ASID_MASK (smtc_asid_mask) +#define HW_ASID_MASK 0xff +/* End SMTC/34K debug hack */ +#else /* FIXME: not correct for R6000 */ + +#define ASID_INC 0x1 +#define ASID_MASK 0xff -#ifdef CONFIG_MIPS_MT_SMTC -#define SMTC_HW_ASID_MASK 0xff -extern unsigned int smtc_asid_mask; #endif #define cpu_context(cpu, mm) ((mm)->context.asid[cpu]) -#define cpu_asid(cpu, mm) ASID_MASK(cpu_context((cpu), (mm))) +#define cpu_asid(cpu, mm) (cpu_context((cpu), (mm)) & ASID_MASK) #define asid_cache(cpu) (cpu_data[cpu].asid_cache) static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) { } +/* + * All unused by hardware upper bits will be considered + * as a software asid extension. + */ +#define ASID_VERSION_MASK ((unsigned long)~(ASID_MASK|(ASID_MASK-1))) +#define ASID_FIRST_VERSION ((unsigned long)(~ASID_VERSION_MASK) + 1) + #ifndef CONFIG_MIPS_MT_SMTC /* Normal, classic MIPS get_new_mmu_context */ static inline void @@ -137,7 +114,7 @@ get_new_mmu_context(struct mm_struct *mm, unsigned long cpu) extern void kvm_local_flush_tlb_all(void); unsigned long asid = asid_cache(cpu); - if (!ASID_MASK((asid = ASID_INC(asid)))) { + if (! ((asid += ASID_INC) & ASID_MASK) ) { if (cpu_has_vtag_icache) flush_icache_all(); #ifdef CONFIG_VIRTUALIZATION @@ -200,7 +177,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, * free up the ASID value for use and flush any old * instances of it from the TLB. */ - oldasid = ASID_MASK(read_c0_entryhi()); + oldasid = (read_c0_entryhi() & ASID_MASK); if(smtc_live_asid[mytlb][oldasid]) { smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu); if(smtc_live_asid[mytlb][oldasid] == 0) @@ -211,7 +188,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, * having ASID_MASK smaller than the hardware maximum, * make sure no "soft" bits become "hard"... */ - write_c0_entryhi((read_c0_entryhi() & ~SMTC_HW_ASID_MASK) | + write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) | cpu_asid(cpu, next)); ehb(); /* Make sure it propagates to TCStatus */ evpe(mtflags); @@ -264,15 +241,15 @@ activate_mm(struct mm_struct *prev, struct mm_struct *next) #ifdef CONFIG_MIPS_MT_SMTC /* See comments for similar code above */ mtflags = dvpe(); - oldasid = ASID_MASK(read_c0_entryhi()); + oldasid = read_c0_entryhi() & ASID_MASK; if(smtc_live_asid[mytlb][oldasid]) { smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu); if(smtc_live_asid[mytlb][oldasid] == 0) smtc_flush_tlb_asid(oldasid); } /* See comments for similar code above */ - write_c0_entryhi((read_c0_entryhi() & ~SMTC_HW_ASID_MASK) | - cpu_asid(cpu, next)); + write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) | + cpu_asid(cpu, next)); ehb(); /* Make sure it propagates to TCStatus */ evpe(mtflags); #else @@ -309,14 +286,14 @@ drop_mmu_context(struct mm_struct *mm, unsigned cpu) #ifdef CONFIG_MIPS_MT_SMTC /* See comments for similar code above */ prevvpe = dvpe(); - oldasid = ASID_MASK(read_c0_entryhi()); + oldasid = (read_c0_entryhi() & ASID_MASK); if (smtc_live_asid[mytlb][oldasid]) { smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu); if(smtc_live_asid[mytlb][oldasid] == 0) smtc_flush_tlb_asid(oldasid); } /* See comments for similar code above */ - write_c0_entryhi((read_c0_entryhi() & ~SMTC_HW_ASID_MASK) + write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) | cpu_asid(cpu, mm)); ehb(); /* Make sure it propagates to TCStatus */ evpe(prevvpe); diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index 5c2ba9f..9098829 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -493,7 +493,7 @@ NESTED(nmi_handler, PT_SIZE, sp) .set noreorder /* check if TLB contains a entry for EPC */ MFC0 k1, CP0_ENTRYHI - andi k1, 0xff /* ASID_MASK patched at run-time!! */ + andi k1, 0xff /* ASID_MASK */ MFC0 k0, CP0_EPC PTR_SRL k0, _PAGE_SHIFT + 1 PTR_SLL k0, _PAGE_SHIFT + 1 diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 31d22f3..7186222 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -111,7 +111,7 @@ static int vpe0limit; static int ipibuffers; static int nostlb; static int asidmask; -unsigned int smtc_asid_mask = 0xff; +unsigned long smtc_asid_mask = 0xff; static int __init vpe0tcs(char *str) { @@ -1395,7 +1395,7 @@ void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu) asid = asid_cache(cpu); do { - if (!ASID_MASK(ASID_INC(asid))) { + if (!((asid += ASID_INC) & ASID_MASK) ) { if (cpu_has_vtag_icache) flush_icache_all(); /* Traverse all online CPUs (hack requires contiguous range) */ @@ -1414,7 +1414,7 @@ void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu) mips_ihb(); } tcstat = read_tc_c0_tcstatus(); - smtc_live_asid[tlb][ASID_MASK(tcstat)] |= (asiduse)(0x1 << i); + smtc_live_asid[tlb][(tcstat & ASID_MASK)] |= (asiduse)(0x1 << i); if (!prevhalt) write_tc_c0_tchalt(0); } @@ -1423,7 +1423,7 @@ void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu) asid = ASID_FIRST_VERSION; local_flush_tlb_all(); /* start new asid cycle */ } - } while (smtc_live_asid[tlb][ASID_MASK(asid)]); + } while (smtc_live_asid[tlb][(asid & ASID_MASK)]); /* * SMTC shares the TLB within VPEs and possibly across all VPEs. @@ -1461,7 +1461,7 @@ void smtc_flush_tlb_asid(unsigned long asid) tlb_read(); ehb(); ehi = read_c0_entryhi(); - if (ASID_MASK(ehi) == asid) { + if ((ehi & ASID_MASK) == asid) { /* * Invalidate only entries with specified ASID, * makiing sure all entries differ. diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 77cff1f..cb14db3 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1656,7 +1656,6 @@ void __cpuinit per_cpu_trap_init(bool is_boot_cpu) unsigned int cpu = smp_processor_id(); unsigned int status_set = ST0_CU0; unsigned int hwrena = cpu_hwrena_impl_bits; - unsigned long asid = 0; #ifdef CONFIG_MIPS_MT_SMTC int secondaryTC = 0; int bootTC = (cpu == 0); @@ -1740,9 +1739,8 @@ void __cpuinit per_cpu_trap_init(bool is_boot_cpu) } #endif /* CONFIG_MIPS_MT_SMTC */ - asid = ASID_FIRST_VERSION; - cpu_data[cpu].asid_cache = asid; - TLBMISS_HANDLER_SETUP(); + if (!cpu_data[cpu].asid_cache) + cpu_data[cpu].asid_cache = ASID_FIRST_VERSION; atomic_inc(&init_mm.mm_count); current->active_mm = &init_mm; diff --git a/arch/mips/kvm/kvm_mips_emul.c b/arch/mips/kvm/kvm_mips_emul.c index 2b2bac9..4b6274b 100644 --- a/arch/mips/kvm/kvm_mips_emul.c +++ b/arch/mips/kvm/kvm_mips_emul.c @@ -525,16 +525,18 @@ kvm_mips_emulate_CP0(uint32_t inst, uint32_t *opc, uint32_t cause, printk("MTCz, cop0->reg[EBASE]: %#lx\n", kvm_read_c0_guest_ebase(cop0)); } else if (rd == MIPS_CP0_TLB_HI && sel == 0) { - uint32_t nasid = ASID_MASK(vcpu->arch.gprs[rt]); + uint32_t nasid = + vcpu->arch.gprs[rt] & ASID_MASK; if ((KSEGX(vcpu->arch.gprs[rt]) != CKSEG0) && - (ASID_MASK(kvm_read_c0_guest_entryhi(cop0)) - != nasid)) { + ((kvm_read_c0_guest_entryhi(cop0) & + ASID_MASK) != nasid)) { kvm_debug ("MTCz, change ASID from %#lx to %#lx\n", - ASID_MASK(kvm_read_c0_guest_entryhi(cop0)), - ASID_MASK(vcpu->arch.gprs[rt])); + kvm_read_c0_guest_entryhi(cop0) & + ASID_MASK, + vcpu->arch.gprs[rt] & ASID_MASK); /* Blow away the shadow host TLBs */ kvm_mips_flush_host_tlb(1); @@ -986,7 +988,8 @@ kvm_mips_emulate_cache(uint32_t inst, uint32_t *opc, uint32_t cause, * resulting handler will do the right thing */ index = kvm_mips_guest_tlb_lookup(vcpu, (va & VPN2_MASK) | - ASID_MASK(kvm_read_c0_guest_entryhi(cop0))); + (kvm_read_c0_guest_entryhi + (cop0) & ASID_MASK)); if (index < 0) { vcpu->arch.host_cp0_entryhi = (va & VPN2_MASK); @@ -1151,7 +1154,7 @@ kvm_mips_emulate_tlbmiss_ld(unsigned long cause, uint32_t *opc, struct kvm_vcpu_arch *arch = &vcpu->arch; enum emulation_result er = EMULATE_DONE; unsigned long entryhi = (vcpu->arch. host_cp0_badvaddr & VPN2_MASK) | - ASID_MASK(kvm_read_c0_guest_entryhi(cop0)); + (kvm_read_c0_guest_entryhi(cop0) & ASID_MASK); if ((kvm_read_c0_guest_status(cop0) & ST0_EXL) == 0) { /* save old pc */ @@ -1198,7 +1201,7 @@ kvm_mips_emulate_tlbinv_ld(unsigned long cause, uint32_t *opc, enum emulation_result er = EMULATE_DONE; unsigned long entryhi = (vcpu->arch.host_cp0_badvaddr & VPN2_MASK) | - ASID_MASK(kvm_read_c0_guest_entryhi(cop0)); + (kvm_read_c0_guest_entryhi(cop0) & ASID_MASK); if ((kvm_read_c0_guest_status(cop0) & ST0_EXL) == 0) { /* save old pc */ @@ -1243,7 +1246,7 @@ kvm_mips_emulate_tlbmiss_st(unsigned long cause, uint32_t *opc, struct kvm_vcpu_arch *arch = &vcpu->arch; enum emulation_result er = EMULATE_DONE; unsigned long entryhi = (vcpu->arch.host_cp0_badvaddr & VPN2_MASK) | - ASID_MASK(kvm_read_c0_guest_entryhi(cop0)); + (kvm_read_c0_guest_entryhi(cop0) & ASID_MASK); if ((kvm_read_c0_guest_status(cop0) & ST0_EXL) == 0) { /* save old pc */ @@ -1287,7 +1290,7 @@ kvm_mips_emulate_tlbinv_st(unsigned long cause, uint32_t *opc, struct kvm_vcpu_arch *arch = &vcpu->arch; enum emulation_result er = EMULATE_DONE; unsigned long entryhi = (vcpu->arch.host_cp0_badvaddr & VPN2_MASK) | - ASID_MASK(kvm_read_c0_guest_entryhi(cop0)); + (kvm_read_c0_guest_entryhi(cop0) & ASID_MASK); if ((kvm_read_c0_guest_status(cop0) & ST0_EXL) == 0) { /* save old pc */ @@ -1356,7 +1359,7 @@ kvm_mips_emulate_tlbmod(unsigned long cause, uint32_t *opc, { struct mips_coproc *cop0 = vcpu->arch.cop0; unsigned long entryhi = (vcpu->arch.host_cp0_badvaddr & VPN2_MASK) | - ASID_MASK(kvm_read_c0_guest_entryhi(cop0)); + (kvm_read_c0_guest_entryhi(cop0) & ASID_MASK); struct kvm_vcpu_arch *arch = &vcpu->arch; enum emulation_result er = EMULATE_DONE; @@ -1783,8 +1786,8 @@ kvm_mips_handle_tlbmiss(unsigned long cause, uint32_t *opc, */ index = kvm_mips_guest_tlb_lookup(vcpu, (va & VPN2_MASK) | - ASID_MASK(kvm_read_c0_guest_entryhi - (vcpu->arch.cop0))); + (kvm_read_c0_guest_entryhi + (vcpu->arch.cop0) & ASID_MASK)); if (index < 0) { if (exccode == T_TLB_LD_MISS) { er = kvm_mips_emulate_tlbmiss_ld(cause, opc, run, vcpu); diff --git a/arch/mips/kvm/kvm_tlb.c b/arch/mips/kvm/kvm_tlb.c index 89511a9..e3f0d9b 100644 --- a/arch/mips/kvm/kvm_tlb.c +++ b/arch/mips/kvm/kvm_tlb.c @@ -51,13 +51,13 @@ EXPORT_SYMBOL(kvm_mips_is_error_pfn); uint32_t kvm_mips_get_kernel_asid(struct kvm_vcpu *vcpu) { - return ASID_MASK(vcpu->arch.guest_kernel_asid[smp_processor_id()]); + return vcpu->arch.guest_kernel_asid[smp_processor_id()] & ASID_MASK; } uint32_t kvm_mips_get_user_asid(struct kvm_vcpu *vcpu) { - return ASID_MASK(vcpu->arch.guest_user_asid[smp_processor_id()]); + return vcpu->arch.guest_user_asid[smp_processor_id()] & ASID_MASK; } inline uint32_t kvm_mips_get_commpage_asid (struct kvm_vcpu *vcpu) @@ -84,7 +84,7 @@ void kvm_mips_dump_host_tlbs(void) old_pagemask = read_c0_pagemask(); printk("HOST TLBs:\n"); - printk("ASID: %#lx\n", ASID_MASK(read_c0_entryhi())); + printk("ASID: %#lx\n", read_c0_entryhi() & ASID_MASK); for (i = 0; i < current_cpu_data.tlbsize; i++) { write_c0_index(i); @@ -428,7 +428,7 @@ int kvm_mips_guest_tlb_lookup(struct kvm_vcpu *vcpu, unsigned long entryhi) for (i = 0; i < KVM_MIPS_GUEST_TLB_SIZE; i++) { if (((TLB_VPN2(tlb[i]) & ~tlb[i].tlb_mask) == ((entryhi & VPN2_MASK) & ~tlb[i].tlb_mask)) && - (TLB_IS_GLOBAL(tlb[i]) || (TLB_ASID(tlb[i]) == ASID_MASK(entryhi)))) { + (TLB_IS_GLOBAL(tlb[i]) || (TLB_ASID(tlb[i]) == (entryhi & ASID_MASK)))) { index = i; break; } @@ -626,7 +626,7 @@ kvm_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu, { unsigned long asid = asid_cache(cpu); - if (!(ASID_MASK(ASID_INC(asid)))) { + if (!((asid += ASID_INC) & ASID_MASK)) { if (cpu_has_vtag_icache) { flush_icache_all(); } @@ -804,7 +804,8 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) if (!newasid) { /* If we preempted while the guest was executing, then reload the pre-empted ASID */ if (current->flags & PF_VCPU) { - write_c0_entryhi(ASID_MASK(vcpu->arch.preempt_entryhi)); + write_c0_entryhi(vcpu->arch. + preempt_entryhi & ASID_MASK); ehb(); } } else { @@ -816,11 +817,13 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) */ if (current->flags & PF_VCPU) { if (KVM_GUEST_KERNEL_MODE(vcpu)) - write_c0_entryhi(ASID_MASK(vcpu->arch. - guest_kernel_asid[cpu])); + write_c0_entryhi(vcpu->arch. + guest_kernel_asid[cpu] & + ASID_MASK); else - write_c0_entryhi(ASID_MASK(vcpu->arch. - guest_user_asid[cpu])); + write_c0_entryhi(vcpu->arch. + guest_user_asid[cpu] & + ASID_MASK); ehb(); } } @@ -879,7 +882,8 @@ uint32_t kvm_get_inst(uint32_t *opc, struct kvm_vcpu *vcpu) kvm_mips_guest_tlb_lookup(vcpu, ((unsigned long) opc & VPN2_MASK) | - ASID_MASK(kvm_read_c0_guest_entryhi(cop0))); + (kvm_read_c0_guest_entryhi + (cop0) & ASID_MASK)); if (index < 0) { kvm_err ("%s: get_user_failed for %p, vcpu: %p, ASID: %#lx\n", diff --git a/arch/mips/lib/dump_tlb.c b/arch/mips/lib/dump_tlb.c index 8a12d00..32b9f21 100644 --- a/arch/mips/lib/dump_tlb.c +++ b/arch/mips/lib/dump_tlb.c @@ -11,7 +11,6 @@ #include #include #include -#include static inline const char *msk2str(unsigned int mask) { @@ -56,7 +55,7 @@ static void dump_tlb(int first, int last) s_pagemask = read_c0_pagemask(); s_entryhi = read_c0_entryhi(); s_index = read_c0_index(); - asid = ASID_MASK(s_entryhi); + asid = s_entryhi & 0xff; for (i = first; i <= last; i++) { write_c0_index(i); @@ -86,7 +85,7 @@ static void dump_tlb(int first, int last) printk("va=%0*lx asid=%02lx\n", width, (entryhi & ~0x1fffUL), - ASID_MASK(entryhi)); + entryhi & 0xff); printk("\t[pa=%0*llx c=%d d=%d v=%d g=%d] ", width, (entrylo0 << 6) & PAGE_MASK, c0, diff --git a/arch/mips/lib/r3k_dump_tlb.c b/arch/mips/lib/r3k_dump_tlb.c index 8327698..91615c2 100644 --- a/arch/mips/lib/r3k_dump_tlb.c +++ b/arch/mips/lib/r3k_dump_tlb.c @@ -9,7 +9,6 @@ #include #include -#include #include #include #include @@ -22,7 +21,7 @@ static void dump_tlb(int first, int last) unsigned int asid; unsigned long entryhi, entrylo0; - asid = ASID_MASK(read_c0_entryhi()); + asid = read_c0_entryhi() & 0xfc0; for (i = first; i <= last; i++) { write_c0_index(i<<8); @@ -36,7 +35,7 @@ static void dump_tlb(int first, int last) /* Unused entries have a virtual address of KSEG0. */ if ((entryhi & 0xffffe000) != 0x80000000 - && (ASID_MASK(entryhi) == asid)) { + && (entryhi & 0xfc0) == asid) { /* * Only print entries in use */ @@ -45,7 +44,7 @@ static void dump_tlb(int first, int last) printk("va=%08lx asid=%08lx" " [pa=%06lx n=%d d=%d v=%d g=%d]", (entryhi & 0xffffe000), - ASID_MASK(entryhi), + entryhi & 0xfc0, entrylo0 & PAGE_MASK, (entrylo0 & (1 << 11)) ? 1 : 0, (entrylo0 & (1 << 10)) ? 1 : 0, diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c index 4a13c15..a63d1ed 100644 --- a/arch/mips/mm/tlb-r3k.c +++ b/arch/mips/mm/tlb-r3k.c @@ -51,7 +51,7 @@ void local_flush_tlb_all(void) #endif local_irq_save(flags); - old_ctx = ASID_MASK(read_c0_entryhi()); + old_ctx = read_c0_entryhi() & ASID_MASK; write_c0_entrylo0(0); entry = r3k_have_wired_reg ? read_c0_wired() : 8; for (; entry < current_cpu_data.tlbsize; entry++) { @@ -87,13 +87,13 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, #ifdef DEBUG_TLB printk("[tlbrange<%lu,0x%08lx,0x%08lx>]", - ASID_MASK(cpu_context(cpu, mm)), start, end); + cpu_context(cpu, mm) & ASID_MASK, start, end); #endif local_irq_save(flags); size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; if (size <= current_cpu_data.tlbsize) { - int oldpid = ASID_MASK(read_c0_entryhi()); - int newpid = ASID_MASK(cpu_context(cpu, mm)); + int oldpid = read_c0_entryhi() & ASID_MASK; + int newpid = cpu_context(cpu, mm) & ASID_MASK; start &= PAGE_MASK; end += PAGE_SIZE - 1; @@ -166,10 +166,10 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) #ifdef DEBUG_TLB printk("[tlbpage<%lu,0x%08lx>]", cpu_context(cpu, vma->vm_mm), page); #endif - newpid = ASID_MASK(cpu_context(cpu, vma->vm_mm)); + newpid = cpu_context(cpu, vma->vm_mm) & ASID_MASK; page &= PAGE_MASK; local_irq_save(flags); - oldpid = ASID_MASK(read_c0_entryhi()); + oldpid = read_c0_entryhi() & ASID_MASK; write_c0_entryhi(page | newpid); BARRIER; tlb_probe(); @@ -197,10 +197,10 @@ void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte) if (current->active_mm != vma->vm_mm) return; - pid = ASID_MASK(read_c0_entryhi()); + pid = read_c0_entryhi() & ASID_MASK; #ifdef DEBUG_TLB - if ((pid != ASID_MASK(cpu_context(cpu, vma->vm_mm))) || (cpu_context(cpu, vma->vm_mm) == 0)) { + if ((pid != (cpu_context(cpu, vma->vm_mm) & ASID_MASK)) || (cpu_context(cpu, vma->vm_mm) == 0)) { printk("update_mmu_cache: Wheee, bogus tlbpid mmpid=%lu tlbpid=%d\n", (cpu_context(cpu, vma->vm_mm)), pid); } @@ -241,7 +241,7 @@ void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, local_irq_save(flags); /* Save old context and create impossible VPN2 value */ - old_ctx = ASID_MASK(read_c0_entryhi()); + old_ctx = read_c0_entryhi() & ASID_MASK; old_pagemask = read_c0_pagemask(); w = read_c0_wired(); write_c0_wired(w + 1); @@ -264,7 +264,7 @@ void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, #endif local_irq_save(flags); - old_ctx = ASID_MASK(read_c0_entryhi()); + old_ctx = read_c0_entryhi() & ASID_MASK; write_c0_entrylo0(entrylo0); write_c0_entryhi(entryhi); write_c0_index(wired); diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c index 09653b2..c643de4 100644 --- a/arch/mips/mm/tlb-r4k.c +++ b/arch/mips/mm/tlb-r4k.c @@ -287,7 +287,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) ENTER_CRITICAL(flags); - pid = ASID_MASK(read_c0_entryhi()); + pid = read_c0_entryhi() & ASID_MASK; address &= (PAGE_MASK << 1); write_c0_entryhi(address | pid); pgdp = pgd_offset(vma->vm_mm, address); diff --git a/arch/mips/mm/tlb-r8k.c b/arch/mips/mm/tlb-r8k.c index 122f920..91c2499 100644 --- a/arch/mips/mm/tlb-r8k.c +++ b/arch/mips/mm/tlb-r8k.c @@ -195,7 +195,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) if (current->active_mm != vma->vm_mm) return; - pid = ASID_MASK(read_c0_entryhi()); + pid = read_c0_entryhi() & ASID_MASK; local_irq_save(flags); address &= PAGE_MASK; diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 2ad41e9..ce9818e 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -29,7 +29,6 @@ #include #include -#include #include #include #include @@ -306,48 +305,6 @@ static struct uasm_reloc relocs[128] __cpuinitdata; static int check_for_high_segbits __cpuinitdata; #endif -static void __cpuinit insn_fixup(unsigned int **start, unsigned int **stop, - unsigned int i_const) -{ - unsigned int **p, *ip; - - for (p = start; p < stop; p++) { - ip = *p; - *ip = (*ip & 0xffff0000) | i_const; - } - local_flush_icache_range((unsigned long)*p, (unsigned long)((*p) + 1)); -} - -#define asid_insn_fixup(section, const) \ -do { \ - extern unsigned int *__start_ ## section; \ - extern unsigned int *__stop_ ## section; \ - insn_fixup(&__start_ ## section, &__stop_ ## section, const); \ -} while(0) - -/* - * Caller is assumed to flush the caches before the first context switch. - */ -static void __cpuinit setup_asid(unsigned int inc, unsigned int mask, - unsigned int version_mask, - unsigned int first_version) -{ - extern asmlinkage void handle_ri_rdhwr_vivt(void); - unsigned long *vivt_exc; - - asid_insn_fixup(__asid_inc, inc); - asid_insn_fixup(__asid_mask, mask); - asid_insn_fixup(__asid_version_mask, version_mask); - asid_insn_fixup(__asid_first_version, first_version); - - /* Patch up the 'handle_ri_rdhwr_vivt' handler. */ - vivt_exc = (unsigned long *) &handle_ri_rdhwr_vivt; - vivt_exc++; - *vivt_exc = (*vivt_exc & ~mask) | mask; - - current_cpu_data.asid_cache = first_version; -} - static int check_for_high_segbits __cpuinitdata; static unsigned int kscratch_used_mask __cpuinitdata; @@ -2226,7 +2183,6 @@ void __cpuinit build_tlb_refill_handler(void) case CPU_TX3922: case CPU_TX3927: #ifndef CONFIG_MIPS_PGD_C0_CONTEXT - setup_asid(0x40, 0xfc0, 0xf000, ASID_FIRST_VERSION_R3000); if (cpu_has_local_ebase) build_r3000_tlb_refill_handler(); if (!run_once) { @@ -2252,11 +2208,6 @@ void __cpuinit build_tlb_refill_handler(void) break; default: -#ifndef CONFIG_MIPS_MT_SMTC - setup_asid(0x1, 0xff, 0xff00, ASID_FIRST_VERSION_R4000); -#else - setup_asid(0x1, smtc_asid_mask, 0xff00, ASID_FIRST_VERSION_R4000); -#endif if (!run_once) { scratch_reg = allocate_kscratch(); #ifdef CONFIG_MIPS_PGD_C0_CONTEXT -- cgit v0.10.2 From 264b83c07a84223f0efd0d1db9ccc66d6f88288f Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Thu, 16 May 2013 17:43:55 +0200 Subject: usermodehelper: check subprocess_info->path != NULL argv_split(empty_or_all_spaces) happily succeeds, it simply returns argc == 0 and argv[0] == NULL. Change call_usermodehelper_exec() to check sub_info->path != NULL to avoid the crash. This is the minimal fix, todo: - perhaps we should change argv_split() to return NULL or change the callers. - kill or justify ->path[0] check - narrow the scope of helper_lock() Signed-off-by: Oleg Nesterov Acked-By: Lucas De Marchi Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds diff --git a/kernel/kmod.c b/kernel/kmod.c index 1296e72..8241906 100644 --- a/kernel/kmod.c +++ b/kernel/kmod.c @@ -569,6 +569,11 @@ int call_usermodehelper_exec(struct subprocess_info *sub_info, int wait) int retval = 0; helper_lock(); + if (!sub_info->path) { + retval = -EINVAL; + goto out; + } + if (sub_info->path[0] == '\0') goto out; -- cgit v0.10.2 From 03cd7e4e1ea16cd151c799a33b5ca1fd41a464df Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 10 May 2013 19:23:40 +0200 Subject: cfg80211: fix wiphy_register error path If rfkill_register() fails in wiphy_register() the struct device is unregistered but everything else isn't (regulatory, debugfs) and we even leave the wiphy instance on all internal lists even though it will likely be freed soon, which is clearly a problem. Fix this by cleaning up properly. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg diff --git a/net/wireless/core.c b/net/wireless/core.c index 84c9ad7..6c9f800 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -638,17 +638,21 @@ int wiphy_register(struct wiphy *wiphy) * cfg80211_mutex lock */ res = rfkill_register(rdev->rfkill); - if (res) - goto out_rm_dev; + if (res) { + device_del(&rdev->wiphy.dev); + + mutex_lock(&cfg80211_mutex); + debugfs_remove_recursive(rdev->wiphy.debugfsdir); + list_del_rcu(&rdev->list); + wiphy_regulatory_deregister(wiphy); + mutex_unlock(&cfg80211_mutex); + return res; + } rtnl_lock(); rdev->wiphy.registered = true; rtnl_unlock(); return 0; - -out_rm_dev: - device_del(&rdev->wiphy.dev); - return res; } EXPORT_SYMBOL(wiphy_register); -- cgit v0.10.2 From c07fe5ae0667f1077d671f62a093261223f918af Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Wed, 24 Apr 2013 00:40:05 -0400 Subject: mac80211_hwsim: correctly register the platform driver Not registering a platform_driver would make us access garbage when the platform callbacks under driver_register() kicks in. Signed-off-by: Sasha Levin Tested-By: Martin Pitt Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index b878a32..cb34c78 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -1723,11 +1723,11 @@ static void mac80211_hwsim_free(void) class_destroy(hwsim_class); } - -static struct device_driver mac80211_hwsim_driver = { - .name = "mac80211_hwsim", - .bus = &platform_bus_type, - .owner = THIS_MODULE, +static struct platform_driver mac80211_hwsim_driver = { + .driver = { + .name = "mac80211_hwsim", + .owner = THIS_MODULE, + }, }; static const struct net_device_ops hwsim_netdev_ops = { @@ -2219,7 +2219,7 @@ static int __init init_mac80211_hwsim(void) spin_lock_init(&hwsim_radio_lock); INIT_LIST_HEAD(&hwsim_radios); - err = driver_register(&mac80211_hwsim_driver); + err = platform_driver_register(&mac80211_hwsim_driver); if (err) return err; @@ -2254,7 +2254,7 @@ static int __init init_mac80211_hwsim(void) err = -ENOMEM; goto failed_drvdata; } - data->dev->driver = &mac80211_hwsim_driver; + data->dev->driver = &mac80211_hwsim_driver.driver; err = device_bind_driver(data->dev); if (err != 0) { printk(KERN_DEBUG @@ -2564,7 +2564,7 @@ failed_drvdata: failed: mac80211_hwsim_free(); failed_unregister_driver: - driver_unregister(&mac80211_hwsim_driver); + platform_driver_unregister(&mac80211_hwsim_driver); return err; } module_init(init_mac80211_hwsim); @@ -2577,6 +2577,6 @@ static void __exit exit_mac80211_hwsim(void) mac80211_hwsim_free(); unregister_netdev(hwsim_mon); - driver_unregister(&mac80211_hwsim_driver); + platform_driver_unregister(&mac80211_hwsim_driver); } module_exit(exit_mac80211_hwsim); -- cgit v0.10.2 From a92eecbbeaf01ea2267751569dd3301248513915 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 29 Apr 2013 12:09:14 +0200 Subject: cfg80211: fix WoWLAN wakeup tracing If the device reports a non-wireless wakeup reason, the tracing code crashes trying to dereference a NULL pointer. Fix this by checking the pointer on all accesses and also add a non_wireless tag to the event. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg diff --git a/net/wireless/trace.h b/net/wireless/trace.h index ecd4fce..5755bc1 100644 --- a/net/wireless/trace.h +++ b/net/wireless/trace.h @@ -2441,6 +2441,7 @@ TRACE_EVENT(cfg80211_report_wowlan_wakeup, TP_STRUCT__entry( WIPHY_ENTRY WDEV_ENTRY + __field(bool, non_wireless) __field(bool, disconnect) __field(bool, magic_pkt) __field(bool, gtk_rekey_failure) @@ -2449,20 +2450,22 @@ TRACE_EVENT(cfg80211_report_wowlan_wakeup, __field(bool, rfkill_release) __field(s32, pattern_idx) __field(u32, packet_len) - __dynamic_array(u8, packet, wakeup->packet_present_len) + __dynamic_array(u8, packet, + wakeup ? wakeup->packet_present_len : 0) ), TP_fast_assign( WIPHY_ASSIGN; WDEV_ASSIGN; - __entry->disconnect = wakeup->disconnect; - __entry->magic_pkt = wakeup->magic_pkt; - __entry->gtk_rekey_failure = wakeup->gtk_rekey_failure; - __entry->eap_identity_req = wakeup->eap_identity_req; - __entry->four_way_handshake = wakeup->four_way_handshake; - __entry->rfkill_release = wakeup->rfkill_release; - __entry->pattern_idx = wakeup->pattern_idx; - __entry->packet_len = wakeup->packet_len; - if (wakeup->packet && wakeup->packet_present_len) + __entry->non_wireless = !wakeup; + __entry->disconnect = wakeup ? wakeup->disconnect : false; + __entry->magic_pkt = wakeup ? wakeup->magic_pkt : false; + __entry->gtk_rekey_failure = wakeup ? wakeup->gtk_rekey_failure : false; + __entry->eap_identity_req = wakeup ? wakeup->eap_identity_req : false; + __entry->four_way_handshake = wakeup ? wakeup->four_way_handshake : false; + __entry->rfkill_release = wakeup ? wakeup->rfkill_release : false; + __entry->pattern_idx = wakeup ? wakeup->pattern_idx : false; + __entry->packet_len = wakeup ? wakeup->packet_len : false; + if (wakeup && wakeup->packet && wakeup->packet_present_len) memcpy(__get_dynamic_array(packet), wakeup->packet, wakeup->packet_present_len); ), -- cgit v0.10.2 From b8360ab8d2caf8a4d0d95bc03f0ba6956459505f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 29 Apr 2013 14:57:44 +0200 Subject: mac80211: fix IEEE80211_SDATA_DISCONNECT_RESUME Since commit 12e7f517029dad819c45eca9ca01fdb9ba57616b, IEEE80211_SDATA_DISCONNECT_RESUME no longer worked as it would simply never be tested. Restore a bit of the code removed there and in 9b7d72c1041ec5b20b24af487a9 to make it work again. Signed-off-by: Johannes Berg diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 158e6eb..44be28c 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1267,6 +1267,7 @@ void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata); void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata); void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data *sdata, __le16 fc, bool acked); +void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata); /* IBSS code */ void ieee80211_ibss_notify_scan_completed(struct ieee80211_local *local); diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 29620bfc..8a948ca 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3623,6 +3623,31 @@ static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata) } } +#ifdef CONFIG_PM +void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + + mutex_lock(&ifmgd->mtx); + if (!ifmgd->associated) { + mutex_unlock(&ifmgd->mtx); + return; + } + + if (sdata->flags & IEEE80211_SDATA_DISCONNECT_RESUME) { + sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME; + mlme_dbg(sdata, "driver requested disconnect after resume\n"); + ieee80211_sta_connection_lost(sdata, + ifmgd->associated->bssid, + WLAN_REASON_UNSPECIFIED, + true); + mutex_unlock(&ifmgd->mtx); + return; + } + mutex_unlock(&ifmgd->mtx); +} +#endif + /* interface setup */ void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata) { diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 3f87fa4..27e0715 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1740,6 +1740,13 @@ int ieee80211_reconfig(struct ieee80211_local *local) mb(); local->resuming = false; + list_for_each_entry(sdata, &local->interfaces, list) { + if (!ieee80211_sdata_running(sdata)) + continue; + if (sdata->vif.type == NL80211_IFTYPE_STATION) + ieee80211_sta_restart(sdata); + } + mod_timer(&local->sta_cleanup, jiffies + 1); #else WARN_ON(1); -- cgit v0.10.2 From 3670946fe2e942bcb09ec9bbc587bf305f9f97da Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 3 May 2013 09:35:35 +0200 Subject: mac80211: fix HT beacon-based channel switch handling When an HT AP is advertising channel switch in a beacon, it doesn't (and shouldn't, according to 802.11-2012 Table 8-20) include a secondary channel offset element. The only possible interpretation is that the previous secondary channel offset remains valid, so use that when switching channel based only on beacon information. VHT requires the Wide Bandwidth Channel Switch subelement to be present in the Channel Switch Wrapper element, so the code for that is probably ok (see 802.11ac Draft 4, 8.4.2.165.) Reported-by: Sujith Manoharan Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 8a948ca..d87d3f1 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1015,7 +1015,8 @@ static void ieee80211_chswitch_timer(unsigned long data) static void ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, - u64 timestamp, struct ieee802_11_elems *elems) + u64 timestamp, struct ieee802_11_elems *elems, + bool beacon) { struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; @@ -1032,6 +1033,7 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, struct cfg80211_chan_def new_vht_chandef = {}; const struct ieee80211_sec_chan_offs_ie *sec_chan_offs; const struct ieee80211_wide_bw_chansw_ie *wide_bw_chansw_ie; + const struct ieee80211_ht_operation *ht_oper; int secondary_channel_offset = -1; ASSERT_MGD_MTX(ifmgd); @@ -1048,11 +1050,14 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, sec_chan_offs = elems->sec_chan_offs; wide_bw_chansw_ie = elems->wide_bw_chansw_ie; + ht_oper = elems->ht_operation; if (ifmgd->flags & (IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_40MHZ)) { sec_chan_offs = NULL; wide_bw_chansw_ie = NULL; + /* only used for bandwidth here */ + ht_oper = NULL; } if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT) @@ -1094,10 +1099,20 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, return; } - if (sec_chan_offs) { + if (!beacon && sec_chan_offs) { secondary_channel_offset = sec_chan_offs->sec_chan_offs; + } else if (beacon && ht_oper) { + secondary_channel_offset = + ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET; } else if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) { - /* if HT is enabled and the IE not present, it's still HT */ + /* + * If it's not a beacon, HT is enabled and the IE not present, + * it's 20 MHz, 802.11-2012 8.5.2.6: + * This element [the Secondary Channel Offset Element] is + * present when switching to a 40 MHz channel. It may be + * present when switching to a 20 MHz channel (in which + * case the secondary channel offset is set to SCN). + */ secondary_channel_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE; } @@ -2796,7 +2811,8 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, mutex_unlock(&local->iflist_mtx); } - ieee80211_sta_process_chanswitch(sdata, rx_status->mactime, elems); + ieee80211_sta_process_chanswitch(sdata, rx_status->mactime, + elems, true); } @@ -3210,7 +3226,7 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, ieee80211_sta_process_chanswitch(sdata, rx_status->mactime, - &elems); + &elems, false); } else if (mgmt->u.action.category == WLAN_CATEGORY_PUBLIC) { ies_len = skb->len - offsetof(struct ieee80211_mgmt, @@ -3232,7 +3248,7 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, ieee80211_sta_process_chanswitch(sdata, rx_status->mactime, - &elems); + &elems, false); } break; } -- cgit v0.10.2 From f6b3d85f7f6d66f890862d763b2ed092c5dd4322 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 3 May 2013 10:01:03 +0200 Subject: mac80211: fix spurious RCU warning and update documentation Document rx vs tx status concurrency requirements. Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 04c2d46..885898a 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -3043,7 +3043,8 @@ void ieee80211_napi_complete(struct ieee80211_hw *hw); * This function may not be called in IRQ context. Calls to this function * for a single hardware must be synchronized against each other. Calls to * this function, ieee80211_rx_ni() and ieee80211_rx_irqsafe() may not be - * mixed for a single hardware. + * mixed for a single hardware. Must not run concurrently with + * ieee80211_tx_status() or ieee80211_tx_status_ni(). * * In process context use instead ieee80211_rx_ni(). * @@ -3059,7 +3060,8 @@ void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb); * (internally defers to a tasklet.) * * Calls to this function, ieee80211_rx() or ieee80211_rx_ni() may not - * be mixed for a single hardware. + * be mixed for a single hardware.Must not run concurrently with + * ieee80211_tx_status() or ieee80211_tx_status_ni(). * * @hw: the hardware this frame came in on * @skb: the buffer to receive, owned by mac80211 after this call @@ -3073,7 +3075,8 @@ void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, struct sk_buff *skb); * (internally disables bottom halves). * * Calls to this function, ieee80211_rx() and ieee80211_rx_irqsafe() may - * not be mixed for a single hardware. + * not be mixed for a single hardware. Must not run concurrently with + * ieee80211_tx_status() or ieee80211_tx_status_ni(). * * @hw: the hardware this frame came in on * @skb: the buffer to receive, owned by mac80211 after this call @@ -3196,7 +3199,8 @@ void ieee80211_get_tx_rates(struct ieee80211_vif *vif, * This function may not be called in IRQ context. Calls to this function * for a single hardware must be synchronized against each other. Calls * to this function, ieee80211_tx_status_ni() and ieee80211_tx_status_irqsafe() - * may not be mixed for a single hardware. + * may not be mixed for a single hardware. Must not run concurrently with + * ieee80211_rx() or ieee80211_rx_ni(). * * @hw: the hardware the frame was transmitted by * @skb: the frame that was transmitted, owned by mac80211 after this call diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c index 0d51877..d3f414f 100644 --- a/net/mac80211/rate.c +++ b/net/mac80211/rate.c @@ -688,8 +688,15 @@ int rate_control_set_rates(struct ieee80211_hw *hw, struct ieee80211_sta *pubsta, struct ieee80211_sta_rates *rates) { - struct ieee80211_sta_rates *old = rcu_dereference(pubsta->rates); + struct ieee80211_sta_rates *old; + /* + * mac80211 guarantees that this function will not be called + * concurrently, so the following RCU access is safe, even without + * extra locking. This can not be checked easily, so we just set + * the condition to true. + */ + old = rcu_dereference_protected(pubsta->rates, true); rcu_assign_pointer(pubsta->rates, rates); if (old) kfree_rcu(old, rcu_head); -- cgit v0.10.2 From 655914ab863bcc06c84270e4159fd59002d6b529 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 6 May 2013 15:54:58 +0200 Subject: mac80211: use just spin_lock() in ieee80211_get_tkip_p2k() ieee80211_get_tkip_p2k() may be called with interrupts disabled, so spin_unlock_bh() isn't safe and leads to warnings. Since it's always called with BHs disabled already, just use spin_lock(). Cc: stable@vger.kernel.org Reported-by: Milan Kocian Acked-by: Stanislaw Gruszka Signed-off-by: Johannes Berg diff --git a/net/mac80211/tkip.c b/net/mac80211/tkip.c index 3ed801d..124b1fd 100644 --- a/net/mac80211/tkip.c +++ b/net/mac80211/tkip.c @@ -208,10 +208,10 @@ void ieee80211_get_tkip_p2k(struct ieee80211_key_conf *keyconf, u32 iv32 = get_unaligned_le32(&data[4]); u16 iv16 = data[2] | (data[0] << 8); - spin_lock_bh(&key->u.tkip.txlock); + spin_lock(&key->u.tkip.txlock); ieee80211_compute_tkip_p1k(key, iv32); tkip_mixing_phase2(tk, ctx, iv16, p2k); - spin_unlock_bh(&key->u.tkip.txlock); + spin_unlock(&key->u.tkip.txlock); } EXPORT_SYMBOL(ieee80211_get_tkip_p2k); -- cgit v0.10.2 From a838490b493b56d523638c150985a2614d814b01 Mon Sep 17 00:00:00 2001 From: Ilan Peer Date: Wed, 8 May 2013 16:35:55 +0300 Subject: nl80211: Add wdev identifier to some nl80211 notifications Adding the attributes fixes an issue with P2P Device not working properly for management frame TX. Signed-off-by: Ilan Peer Signed-off-by: Johannes Berg diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index afa2838..0dca987 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -9970,6 +9970,7 @@ int nl80211_send_mgmt(struct cfg80211_registered_device *rdev, if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) || (netdev && nla_put_u32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex)) || + nla_put_u64(msg, NL80211_ATTR_WDEV, wdev_id(wdev)) || nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ, freq) || (sig_dbm && nla_put_u32(msg, NL80211_ATTR_RX_SIGNAL_DBM, sig_dbm)) || @@ -10010,6 +10011,7 @@ void cfg80211_mgmt_tx_status(struct wireless_dev *wdev, u64 cookie, if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) || (netdev && nla_put_u32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex)) || + nla_put_u64(msg, NL80211_ATTR_WDEV, wdev_id(wdev)) || nla_put(msg, NL80211_ATTR_FRAME, len, buf) || nla_put_u64(msg, NL80211_ATTR_COOKIE, cookie) || (ack && nla_put_flag(msg, NL80211_ATTR_ACK))) -- cgit v0.10.2 From 2b9ccd4e4308272e5aec614b77c5385e7ec2ec90 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 13 May 2013 16:42:40 +0200 Subject: mac80211: fix AP-mode frame matching In AP mode, ignore frames with mis-matched BSSID that aren't multicast or sent to the correct destination. This fixes reporting public action frames to userspace multiple times on multiple virtual AP interfaces. Cc: stable@vger.kernel.org Reported-by: Jouni Malinen Signed-off-by: Johannes Berg diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index c8447af..8e29526 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -3036,6 +3036,9 @@ static int prepare_for_handlers(struct ieee80211_rx_data *rx, * and location updates. Note that mac80211 * itself never looks at these frames. */ + if (!multicast && + !ether_addr_equal(sdata->vif.addr, hdr->addr1)) + return 0; if (ieee80211_is_public_action(hdr, skb->len)) return 1; if (!ieee80211_is_beacon(hdr->frame_control)) -- cgit v0.10.2 From 2430816b4e29fd9e6719ff46a4292d8f58565cff Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 14 May 2013 09:19:53 +0200 Subject: cfg80211: fix interface down/disconnect state handling When the interface goes down, there's no need to call cfg80211_mlme_down() after __cfg80211_disconnect() as the latter will call the former (if appropriate.) Also, in __cfg80211_disconnect(), if the cfg80211 SME isn't used, __cfg80211_disconnected() may still need to be called (depending on the current state) so that the SME state gets cleared. Signed-off-by: Johannes Berg diff --git a/net/wireless/core.c b/net/wireless/core.c index 6c9f800..73405e0 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -870,7 +870,6 @@ void cfg80211_leave(struct cfg80211_registered_device *rdev, #endif __cfg80211_disconnect(rdev, dev, WLAN_REASON_DEAUTH_LEAVING, true); - cfg80211_mlme_down(rdev, dev); wdev_unlock(wdev); break; case NL80211_IFTYPE_MESH_POINT: diff --git a/net/wireless/sme.c b/net/wireless/sme.c index a9dc5c7..8b5eddf 100644 --- a/net/wireless/sme.c +++ b/net/wireless/sme.c @@ -961,7 +961,7 @@ int __cfg80211_disconnect(struct cfg80211_registered_device *rdev, /* was it connected by userspace SME? */ if (!wdev->conn) { cfg80211_mlme_down(rdev, dev); - return 0; + goto disconnect; } if (wdev->sme_state == CFG80211_SME_CONNECTING && @@ -987,6 +987,7 @@ int __cfg80211_disconnect(struct cfg80211_registered_device *rdev, return err; } + disconnect: if (wdev->sme_state == CFG80211_SME_CONNECTED) __cfg80211_disconnected(dev, NULL, 0, 0, false); else if (wdev->sme_state == CFG80211_SME_CONNECTING) -- cgit v0.10.2 From de3d43a37de9549356d1bc4a6a2a3f07ccbdf072 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 14 May 2013 09:39:02 +0200 Subject: mac80211: report deauth to cfg80211 for local state change Even if the frame isn't transmitted to the AP, we need to report it to cfg80211 so the state there can be updated correctly. Reported-by: Jouni Malinen Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index d87d3f1..a46e490 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -4370,7 +4370,7 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; bool tx = !req->local_state_change; - bool sent_frame = false; + bool report_frame = false; mutex_lock(&ifmgd->mtx); @@ -4387,7 +4387,7 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, ieee80211_destroy_auth_data(sdata, false); mutex_unlock(&ifmgd->mtx); - sent_frame = tx; + report_frame = true; goto out; } @@ -4395,12 +4395,12 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, ether_addr_equal(ifmgd->associated->bssid, req->bssid)) { ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, req->reason_code, tx, frame_buf); - sent_frame = tx; + report_frame = true; } mutex_unlock(&ifmgd->mtx); out: - if (sent_frame) + if (report_frame) __cfg80211_send_deauth(sdata->dev, frame_buf, IEEE80211_DEAUTH_FRAME_LEN); -- cgit v0.10.2 From e248ad30204eff6559b4d2d94d49d9d46c08185a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 16 May 2013 10:24:28 +0200 Subject: cfg80211: fix sending WoWLAN TCP wakeup settings The code sending the current WoWLAN TCP wakeup settings in nl80211_send_wowlan_tcp() is not closing the nested attribute, thus causing the parser to get confused on the receiver side in userspace (iw). Fix this. Cc: stable@vger.kernel.org [3.9] Reported-by: Deepak Arora Signed-off-by: Johannes Berg diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 0dca987..dfdb5e6 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -7577,6 +7577,8 @@ static int nl80211_send_wowlan_tcp(struct sk_buff *msg, &tcp->payload_tok)) return -ENOBUFS; + nla_nest_end(msg, nl_tcp); + return 0; } -- cgit v0.10.2 From f70ed7b330ce769828d402f920fb13da6c13ea63 Mon Sep 17 00:00:00 2001 From: Ilan Peer Date: Sun, 28 Apr 2013 08:18:28 +0300 Subject: iwlwifi: mvm: Always use SCAN_TYPE_FORCED The FW AUX framework does not handle well cases where time events fail to be scheduled (and as a result issues assert 0x3330). Until a proper fix is in place, WA this by always setting the scan type to SCAN_TYPE_FORCED. Cc: stable@vger.kernel.org Signed-off-by: Ilan Peer Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index 2157b0f..2476e43 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -298,6 +298,12 @@ int iwl_mvm_scan_request(struct iwl_mvm *mvm, else cmd->type = cpu_to_le32(SCAN_TYPE_FORCED); + /* + * TODO: This is a WA due to a bug in the FW AUX framework that does not + * properly handle time events that fail to be scheduled + */ + cmd->type = cpu_to_le32(SCAN_TYPE_FORCED); + cmd->repeats = cpu_to_le32(1); /* -- cgit v0.10.2 From 51b6b9e029e81c857f9d8d17060f499cd25febdb Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 2 May 2013 15:01:24 +0300 Subject: iwlwifi: mvm: tell firmware to let multicast frames in Without this command, the firmware will filter out all the multicast frames. Let them all in as for now. Later we will want to optimize this to save power. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h index 191dcae..c638455 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h @@ -173,6 +173,8 @@ enum { REPLY_DEBUG_CMD = 0xf0, DEBUG_LOG_MSG = 0xf7, + MCAST_FILTER_CMD = 0xd0, + /* D3 commands/notifications */ D3_CONFIG_CMD = 0xd3, PROT_OFFLOAD_CONFIG_CMD = 0xd4, @@ -948,4 +950,29 @@ struct iwl_set_calib_default_cmd { u8 data[0]; } __packed; /* PHY_CALIB_OVERRIDE_VALUES_S */ +#define MAX_PORT_ID_NUM 2 + +/** + * struct iwl_mcast_filter_cmd - configure multicast filter. + * @filter_own: Set 1 to filter out multicast packets sent by station itself + * @port_id: Multicast MAC addresses array specifier. This is a strange way + * to identify network interface adopted in host-device IF. + * It is used by FW as index in array of addresses. This array has + * MAX_PORT_ID_NUM members. + * @count: Number of MAC addresses in the array + * @pass_all: Set 1 to pass all multicast packets. + * @bssid: current association BSSID. + * @addr_list: Place holder for array of MAC addresses. + * IMPORTANT: add padding if necessary to ensure DWORD alignment. + */ +struct iwl_mcast_filter_cmd { + u8 filter_own; + u8 port_id; + u8 count; + u8 pass_all; + u8 bssid[6]; + u8 reserved[2]; + u8 addr_list[0]; +} __packed; /* MCAST_FILTERING_CMD_API_S_VER_1 */ + #endif /* __fw_api_h__ */ diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index dd158ec..899b56c 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -701,6 +701,20 @@ static void iwl_mvm_configure_filter(struct ieee80211_hw *hw, *total_flags = 0; } +static int iwl_mvm_configure_mcast_filter(struct iwl_mvm *mvm, + struct ieee80211_vif *vif) +{ + struct iwl_mcast_filter_cmd mcast_filter_cmd = { + .pass_all = 1, + }; + + memcpy(mcast_filter_cmd.bssid, vif->bss_conf.bssid, ETH_ALEN); + + return iwl_mvm_send_cmd_pdu(mvm, MCAST_FILTER_CMD, CMD_SYNC, + sizeof(mcast_filter_cmd), + &mcast_filter_cmd); +} + static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_bss_conf *bss_conf, @@ -722,6 +736,7 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm, return; } iwl_mvm_bt_coex_vif_assoc(mvm, vif); + iwl_mvm_configure_mcast_filter(mvm, vif); } else if (mvmvif->ap_sta_id != IWL_MVM_STATION_COUNT) { /* remove AP station now that the MAC is unassoc */ ret = iwl_mvm_rm_sta_id(mvm, vif, mvmvif->ap_sta_id); diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c index fe031d3..b29c31a 100644 --- a/drivers/net/wireless/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/iwlwifi/mvm/ops.c @@ -292,6 +292,7 @@ static const char *iwl_mvm_cmd_strings[REPLY_MAX] = { CMD(BT_COEX_PROT_ENV), CMD(BT_PROFILE_NOTIFICATION), CMD(BT_CONFIG), + CMD(MCAST_FILTER_CMD), }; #undef CMD -- cgit v0.10.2 From ba283927268d45184c17c37ff78d427e59026229 Mon Sep 17 00:00:00 2001 From: Alexander Bondar Date: Thu, 2 May 2013 16:34:48 +0300 Subject: iwlwifi: mvm: Prevent setting assoc flag in MAC_CONTEXT_CMD In the normal flow first MAC_CONTEXT_CMD for particular interface is never sent while associated. The exception is fw restart flow when resuming from suspend when WoWLAN is enabled. In this case successive "add" and "modify" MAC_CONTEXT_CMD commands may be sent with assoc flag set what cause FW mal functioning. To prevent this never set assoc flag in MAC_CONTEXT_CMD with action "add". Cc: stable@vger.kernel.org Signed-off-by: Alexander Bondar Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c index e6eca4d..b2cc3d9 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c @@ -586,10 +586,12 @@ static int iwl_mvm_mac_ctxt_send_cmd(struct iwl_mvm *mvm, */ static void iwl_mvm_mac_ctxt_cmd_fill_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, - struct iwl_mac_data_sta *ctxt_sta) + struct iwl_mac_data_sta *ctxt_sta, + bool force_assoc_off) { /* We need the dtim_period to set the MAC as associated */ - if (vif->bss_conf.assoc && vif->bss_conf.dtim_period) { + if (vif->bss_conf.assoc && vif->bss_conf.dtim_period && + !force_assoc_off) { u32 dtim_offs; /* @@ -659,7 +661,8 @@ static int iwl_mvm_mac_ctxt_cmd_station(struct iwl_mvm *mvm, cmd.filter_flags &= ~cpu_to_le32(MAC_FILTER_IN_BEACON); /* Fill the data specific for station mode */ - iwl_mvm_mac_ctxt_cmd_fill_sta(mvm, vif, &cmd.sta); + iwl_mvm_mac_ctxt_cmd_fill_sta(mvm, vif, &cmd.sta, + action == FW_CTXT_ACTION_ADD); return iwl_mvm_mac_ctxt_send_cmd(mvm, &cmd); } @@ -677,7 +680,8 @@ static int iwl_mvm_mac_ctxt_cmd_p2p_client(struct iwl_mvm *mvm, iwl_mvm_mac_ctxt_cmd_common(mvm, vif, &cmd, action); /* Fill the data specific for station mode */ - iwl_mvm_mac_ctxt_cmd_fill_sta(mvm, vif, &cmd.p2p_sta.sta); + iwl_mvm_mac_ctxt_cmd_fill_sta(mvm, vif, &cmd.p2p_sta.sta, + action == FW_CTXT_ACTION_ADD); cmd.p2p_sta.ctwin = cpu_to_le32(noa->oppps_ctwindow & IEEE80211_P2P_OPPPS_CTWINDOW_MASK); -- cgit v0.10.2 From e3d4bc8cc0230e8dc8033484666f03f87392a8c4 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 7 May 2013 14:08:24 +0300 Subject: iwlwifi: mvm: fix aggregation drain flow Move the counter for non-AMPDU frames to mvm. It is needed for the drain flow which happens once the ieee80211_sta has been freed, so keeping it in iwl_mvm_sta which is embed into ieee80211_sta is not a good idea. Also, since its purpose it to remove the STA in the fw only after all the frames for this station have exited the shared Tx queues, we need to decrement it in the reclaim flow. This flow can happen after ieee80211_sta has been removed, which means that we have no iwl_mvm_sta there. So we can't know what is the vif type. Hence, we know audit these frames for all the vif types. In order to avoid spawning sta_drained_wk all the time, we now check that we are in a flow in which draining might happen - only when mvmsta is NULL. This is better than previous code that would spawn sta_drained_wk all the time in AP mode. Cc: stable@vger.kernel.org [3.9] Signed-off-by: Emmanuel Grumbach Reviewed-by: Ilan Peer Reviewed-by: Johannes Berg Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 899b56c..a5eb8c8 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -946,7 +946,7 @@ static void iwl_mvm_mac_sta_notify(struct ieee80211_hw *hw, switch (cmd) { case STA_NOTIFY_SLEEP: - if (atomic_read(&mvmsta->pending_frames) > 0) + if (atomic_read(&mvm->pending_frames[mvmsta->sta_id]) > 0) ieee80211_sta_block_awake(hw, sta, true); /* * The fw updates the STA to be asleep. Tx packets on the Tx diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h index 8269bc5..9f46b23 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h @@ -292,6 +292,7 @@ struct iwl_mvm { struct ieee80211_sta __rcu *fw_id_to_mac_id[IWL_MVM_STATION_COUNT]; struct work_struct sta_drained_wk; unsigned long sta_drained[BITS_TO_LONGS(IWL_MVM_STATION_COUNT)]; + atomic_t pending_frames[IWL_MVM_STATION_COUNT]; /* configured by mac80211 */ u32 rts_threshold; diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c index 0fd96e4..5c664ed 100644 --- a/drivers/net/wireless/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/iwlwifi/mvm/sta.c @@ -219,7 +219,7 @@ int iwl_mvm_add_sta(struct iwl_mvm *mvm, mvm_sta->max_agg_bufsize = LINK_QUAL_AGG_FRAME_LIMIT_DEF; /* HW restart, don't assume the memory has been zeroed */ - atomic_set(&mvm_sta->pending_frames, 0); + atomic_set(&mvm->pending_frames[sta_id], 0); mvm_sta->tid_disable_agg = 0; mvm_sta->tfd_queue_msk = 0; for (i = 0; i < IEEE80211_NUM_ACS; i++) @@ -407,14 +407,21 @@ int iwl_mvm_rm_sta(struct iwl_mvm *mvm, } /* + * Make sure that the tx response code sees the station as -EBUSY and + * calls the drain worker. + */ + spin_lock_bh(&mvm_sta->lock); + /* * There are frames pending on the AC queues for this station. * We need to wait until all the frames are drained... */ - if (atomic_read(&mvm_sta->pending_frames)) { - ret = iwl_mvm_drain_sta(mvm, mvm_sta, true); + if (atomic_read(&mvm->pending_frames[mvm_sta->sta_id])) { rcu_assign_pointer(mvm->fw_id_to_mac_id[mvm_sta->sta_id], ERR_PTR(-EBUSY)); + spin_unlock_bh(&mvm_sta->lock); + ret = iwl_mvm_drain_sta(mvm, mvm_sta, true); } else { + spin_unlock_bh(&mvm_sta->lock); ret = iwl_mvm_rm_sta_common(mvm, mvm_sta->sta_id); rcu_assign_pointer(mvm->fw_id_to_mac_id[mvm_sta->sta_id], NULL); } diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.h b/drivers/net/wireless/iwlwifi/mvm/sta.h index 12abd2d..a4ddce7 100644 --- a/drivers/net/wireless/iwlwifi/mvm/sta.h +++ b/drivers/net/wireless/iwlwifi/mvm/sta.h @@ -274,7 +274,6 @@ struct iwl_mvm_tid_data { * @bt_reduced_txpower: is reduced tx power enabled for this station * @lock: lock to protect the whole struct. Since %tid_data is access from Tx * and from Tx response flow, it needs a spinlock. - * @pending_frames: number of frames for this STA on the shared Tx queues. * @tid_data: per tid data. Look at %iwl_mvm_tid_data. * * When mac80211 creates a station it reserves some space (hw->sta_data_size) @@ -290,7 +289,6 @@ struct iwl_mvm_sta { u8 max_agg_bufsize; bool bt_reduced_txpower; spinlock_t lock; - atomic_t pending_frames; struct iwl_mvm_tid_data tid_data[IWL_MAX_TID_COUNT]; struct iwl_lq_sta lq_sta; struct ieee80211_vif *vif; diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c index 4790743..f212f16 100644 --- a/drivers/net/wireless/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/iwlwifi/mvm/tx.c @@ -416,9 +416,8 @@ int iwl_mvm_tx_skb(struct iwl_mvm *mvm, struct sk_buff *skb, spin_unlock(&mvmsta->lock); - if (mvmsta->vif->type == NL80211_IFTYPE_AP && - txq_id < IWL_MVM_FIRST_AGG_QUEUE) - atomic_inc(&mvmsta->pending_frames); + if (txq_id < IWL_MVM_FIRST_AGG_QUEUE) + atomic_inc(&mvm->pending_frames[mvmsta->sta_id]); return 0; @@ -680,16 +679,41 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm, /* * If the txq is not an AMPDU queue, there is no chance we freed * several skbs. Check that out... - * If there are no pending frames for this STA, notify mac80211 that - * this station can go to sleep in its STA table. */ - if (txq_id < IWL_MVM_FIRST_AGG_QUEUE && mvmsta && - !WARN_ON(skb_freed > 1) && - mvmsta->vif->type == NL80211_IFTYPE_AP && - atomic_sub_and_test(skb_freed, &mvmsta->pending_frames)) { - ieee80211_sta_block_awake(mvm->hw, sta, false); - set_bit(sta_id, mvm->sta_drained); - schedule_work(&mvm->sta_drained_wk); + if (txq_id < IWL_MVM_FIRST_AGG_QUEUE && !WARN_ON(skb_freed > 1) && + atomic_sub_and_test(skb_freed, &mvm->pending_frames[sta_id])) { + if (mvmsta) { + /* + * If there are no pending frames for this STA, notify + * mac80211 that this station can go to sleep in its + * STA table. + */ + if (mvmsta->vif->type == NL80211_IFTYPE_AP) + ieee80211_sta_block_awake(mvm->hw, sta, false); + /* + * We might very well have taken mvmsta pointer while + * the station was being removed. The remove flow might + * have seen a pending_frame (because we didn't take + * the lock) even if now the queues are drained. So make + * really sure now that this the station is not being + * removed. If it is, run the drain worker to remove it. + */ + spin_lock_bh(&mvmsta->lock); + sta = rcu_dereference(mvm->fw_id_to_mac_id[sta_id]); + if (IS_ERR_OR_NULL(sta)) { + /* + * Station disappeared in the meantime: + * so we are draining. + */ + set_bit(sta_id, mvm->sta_drained); + schedule_work(&mvm->sta_drained_wk); + } + spin_unlock_bh(&mvmsta->lock); + } else if (!mvmsta) { + /* Tx response without STA, so we are draining */ + set_bit(sta_id, mvm->sta_drained); + schedule_work(&mvm->sta_drained_wk); + } } rcu_read_unlock(); -- cgit v0.10.2 From 1b6b698f53b3a5382a907308048d77c8bacca4ab Mon Sep 17 00:00:00 2001 From: Alexandru Gheorghiu Date: Thu, 16 May 2013 14:04:24 -0500 Subject: drivers: char: ipmi: Replaced kmalloc and strcpy with kstrdup Replaced calls to kmalloc followed by strcpy with a sincle call to kstrdup. Patch found using coccinelle. Signed-off-by: Alexandru Gheorghiu Signed-off-by: Corey Minyard Signed-off-by: Linus Torvalds diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 4d439d2..4445fa1 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -2037,12 +2037,11 @@ int ipmi_smi_add_proc_entry(ipmi_smi_t smi, char *name, entry = kmalloc(sizeof(*entry), GFP_KERNEL); if (!entry) return -ENOMEM; - entry->name = kmalloc(strlen(name)+1, GFP_KERNEL); + entry->name = kstrdup(name, GFP_KERNEL); if (!entry->name) { kfree(entry); return -ENOMEM; } - strcpy(entry->name, name); file = proc_create_data(name, 0, smi->proc_dir, proc_ops, data); if (!file) { -- cgit v0.10.2 From a5f2b3d6a738e7d4180012fe7b541172f8c8dcea Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Thu, 16 May 2013 14:04:25 -0500 Subject: drivers/char/ipmi: memcpy, need additional 2 bytes to avoid memory overflow When calling memcpy, read_data and write_data need additional 2 bytes. write_data: for checking: "if (size > IPMI_MAX_MSG_LENGTH)" for operating: "memcpy(bt->write_data + 3, data + 1, size - 1)" read_data: for checking: "if (msg_len < 3 || msg_len > IPMI_MAX_MSG_LENGTH)" for operating: "memcpy(data + 2, bt->read_data + 4, msg_len - 2)" Signed-off-by: Chen Gang Signed-off-by: Corey Minyard Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c index cdd4c09f..a22a7a5 100644 --- a/drivers/char/ipmi/ipmi_bt_sm.c +++ b/drivers/char/ipmi/ipmi_bt_sm.c @@ -95,9 +95,9 @@ struct si_sm_data { enum bt_states state; unsigned char seq; /* BT sequence number */ struct si_sm_io *io; - unsigned char write_data[IPMI_MAX_MSG_LENGTH]; + unsigned char write_data[IPMI_MAX_MSG_LENGTH + 2]; /* +2 for memcpy */ int write_count; - unsigned char read_data[IPMI_MAX_MSG_LENGTH]; + unsigned char read_data[IPMI_MAX_MSG_LENGTH + 2]; /* +2 for memcpy */ int read_count; int truncated; long timeout; /* microseconds countdown */ -- cgit v0.10.2 From 0849bfece0199a345b0c5143d10cbc1dc228a60f Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Thu, 16 May 2013 14:04:26 -0500 Subject: ipmi: Improve error messages on failed irq enable When the interrupt enable message returns an error, the messages are not entirely accurate nor helpful. So improve them. Signed-off-by: Corey Minyard Cc: Andy Lutomirski Signed-off-by: Linus Torvalds diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 313538a..af4b23f 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -663,8 +663,10 @@ static void handle_transaction_done(struct smi_info *smi_info) /* We got the flags from the SMI, now handle them. */ smi_info->handlers->get_result(smi_info->si_sm, msg, 4); if (msg[2] != 0) { - dev_warn(smi_info->dev, "Could not enable interrupts" - ", failed get, using polled mode.\n"); + dev_warn(smi_info->dev, + "Couldn't get irq info: %x.\n", msg[2]); + dev_warn(smi_info->dev, + "Maybe ok, but ipmi might run very slowly.\n"); smi_info->si_state = SI_NORMAL; } else { msg[0] = (IPMI_NETFN_APP_REQUEST << 2); @@ -685,10 +687,12 @@ static void handle_transaction_done(struct smi_info *smi_info) /* We got the flags from the SMI, now handle them. */ smi_info->handlers->get_result(smi_info->si_sm, msg, 4); - if (msg[2] != 0) - dev_warn(smi_info->dev, "Could not enable interrupts" - ", failed set, using polled mode.\n"); - else + if (msg[2] != 0) { + dev_warn(smi_info->dev, + "Couldn't set irq info: %x.\n", msg[2]); + dev_warn(smi_info->dev, + "Maybe ok, but ipmi might run very slowly.\n"); + } else smi_info->interrupt_disabled = 0; smi_info->si_state = SI_NORMAL; break; -- cgit v0.10.2 From 6368087e851e697679af059b4247aca33a69cef3 Mon Sep 17 00:00:00 2001 From: Benjamin LaHaise Date: Thu, 16 May 2013 14:04:27 -0500 Subject: ipmi: ipmi_devintf: compat_ioctl method fails to take ipmi_mutex When a 32 bit version of ipmitool is used on a 64 bit kernel, the ipmi_devintf code fails to correctly acquire ipmi_mutex. This results in incomplete data being retrieved in some cases, or other possible failures. Add a wrapper around compat_ipmi_ioctl() to take ipmi_mutex to fix this. Signed-off-by: Benjamin LaHaise Signed-off-by: Corey Minyard Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds diff --git a/drivers/char/ipmi/ipmi_devintf.c b/drivers/char/ipmi/ipmi_devintf.c index 9eb360f..d5a5f02 100644 --- a/drivers/char/ipmi/ipmi_devintf.c +++ b/drivers/char/ipmi/ipmi_devintf.c @@ -837,13 +837,25 @@ static long compat_ipmi_ioctl(struct file *filep, unsigned int cmd, return ipmi_ioctl(filep, cmd, arg); } } + +static long unlocked_compat_ipmi_ioctl(struct file *filep, unsigned int cmd, + unsigned long arg) +{ + int ret; + + mutex_lock(&ipmi_mutex); + ret = compat_ipmi_ioctl(filep, cmd, arg); + mutex_unlock(&ipmi_mutex); + + return ret; +} #endif static const struct file_operations ipmi_fops = { .owner = THIS_MODULE, .unlocked_ioctl = ipmi_unlocked_ioctl, #ifdef CONFIG_COMPAT - .compat_ioctl = compat_ipmi_ioctl, + .compat_ioctl = unlocked_compat_ipmi_ioctl, #endif .open = ipmi_open, .release = ipmi_release, -- cgit v0.10.2 From 6ff50cd55545d922f5c62776fe1feb38a9846168 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 15 May 2013 15:38:01 +0000 Subject: tcp: gso: do not generate out of order packets MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit GSO TCP handler has following issues : 1) ooo_okay from original GSO packet is duplicated to all segments 2) segments (but the last one) are orphaned, so transmit path can not get transmit queue number from the socket. This happens if GSO segmentation is done before stacked device for example. Result is we can send packets from a given TCP flow to different TX queues (if using multiqueue NICS). This generates OOO problems and spurious SACK & retransmits. Fix this by keeping socket pointer set for all segments. This means that every segment must also have a destructor, and the original gso skb truesize must be split on all segments, to keep precise sk->sk_wmem_alloc accounting. Signed-off-by: Eric Dumazet Cc: Maciej Żenczykowski Cc: Tom Herbert Cc: Neal Cardwell Cc: Yuchung Cheng Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 10c9393..ab450c0 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2887,6 +2887,7 @@ struct sk_buff *tcp_tso_segment(struct sk_buff *skb, unsigned int mss; struct sk_buff *gso_skb = skb; __sum16 newcheck; + bool ooo_okay, copy_destructor; if (!pskb_may_pull(skb, sizeof(*th))) goto out; @@ -2927,10 +2928,18 @@ struct sk_buff *tcp_tso_segment(struct sk_buff *skb, goto out; } + copy_destructor = gso_skb->destructor == tcp_wfree; + ooo_okay = gso_skb->ooo_okay; + /* All segments but the first should have ooo_okay cleared */ + skb->ooo_okay = 0; + segs = skb_segment(skb, features); if (IS_ERR(segs)) goto out; + /* Only first segment might have ooo_okay set */ + segs->ooo_okay = ooo_okay; + delta = htonl(oldlen + (thlen + mss)); skb = segs; @@ -2950,6 +2959,17 @@ struct sk_buff *tcp_tso_segment(struct sk_buff *skb, thlen, skb->csum)); seq += mss; + if (copy_destructor) { + skb->destructor = gso_skb->destructor; + skb->sk = gso_skb->sk; + /* {tcp|sock}_wfree() use exact truesize accounting : + * sum(skb->truesize) MUST be exactly be gso_skb->truesize + * So we account mss bytes of 'true size' for each segment. + * The last segment will contain the remaining. + */ + skb->truesize = mss; + gso_skb->truesize -= mss; + } skb = skb->next; th = tcp_hdr(skb); @@ -2962,7 +2982,7 @@ struct sk_buff *tcp_tso_segment(struct sk_buff *skb, * is freed at TX completion, and not right now when gso_skb * is freed by GSO engine */ - if (gso_skb->destructor == tcp_wfree) { + if (copy_destructor) { swap(gso_skb->sk, skb->sk); swap(gso_skb->destructor, skb->destructor); swap(gso_skb->truesize, skb->truesize); -- cgit v0.10.2 From 3aefe2b4a8003517d6e15112f806fd4069785389 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 16 May 2013 06:31:42 +0000 Subject: NET: mv643xx_eth: avoid lockdep dump on interface down When the interface is shutdown, the mv643xx_eth driver hits the following lockdep dump: ================================= [ INFO: inconsistent lock state ] 3.8.0+ #303 Not tainted --------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. NetworkManager/3449 [HC0[0]:SC0[0]:HE1:SE1] takes: (_xmit_ETHER#2){+.?...}, at: [] txq_reclaim+0x60/0x230 {IN-SOFTIRQ-W} state was registered at: [] mark_irqflags+0xf8/0x1c4 [] __lock_acquire+0x458/0x9a4 [] lock_acquire+0x60/0x74 [] _raw_spin_lock+0x40/0x50 [] sch_direct_xmit+0xa4/0x2e4 [] dev_queue_xmit+0x174/0x508 [] ip6_finish_output2+0xd0/0x3c4 [] mld_sendpack+0x190/0x368 [] mld_ifc_timer_expire+0xc/0x58 [] call_timer_fn+0x6c/0xe0 [] run_timer_softirq+0x1d8/0x210 [] __do_softirq+0xe0/0x1b4 [] irq_exit+0x64/0x6c [] handle_IRQ+0x34/0x84 [] __irq_usr+0x30/0x80 irq event stamp: 160603 hardirqs last enabled at (160603): [] kfree+0xa8/0xe8 hardirqs last disabled at (160602): [] kfree+0x1c/0xe8 softirqs last enabled at (160304): [] mib_counters_update+0x5ec/0x60c softirqs last disabled at (160302): [] _raw_spin_lock_bh+0x14/0x54 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(_xmit_ETHER#2); lock(_xmit_ETHER#2); *** DEADLOCK *** 1 lock held by NetworkManager/3449: #0: (rtnl_mutex){+.+.+.}, at: [] rtnetlink_rcv+0xc/0x24 stack backtrace: [] (unwind_backtrace+0x0/0xf8) from [] (print_usage_bug+0x150/0x1d4) [] (print_usage_bug+0x150/0x1d4) from [] (mark_lock_irq+0x248/0x290) [] (mark_lock_irq+0x248/0x290) from [] (mark_lock+0x158/0x404) [] (mark_lock+0x158/0x404) from [] (mark_irqflags+0x138/0x1c4) [] (mark_irqflags+0x138/0x1c4) from [] (__lock_acquire+0x458/0x9a4) [] (__lock_acquire+0x458/0x9a4) from [] (lock_acquire+0x60/0x74) [] (lock_acquire+0x60/0x74) from [] (_raw_spin_lock+0x40/0x50) [] (_raw_spin_lock+0x40/0x50) from [] (txq_reclaim+0x60/0x230) [] (txq_reclaim+0x60/0x230) from [] (txq_deinit+0x24/0xcc) [] (txq_deinit+0x24/0xcc) from [] (mv643xx_eth_stop+0x1a8/0x1bc) [] (mv643xx_eth_stop+0x1a8/0x1bc) from [] (__dev_close_many+0x88/0xcc) [] (__dev_close_many+0x88/0xcc) from [] (__dev_close+0x28/0x3c) [] (__dev_close+0x28/0x3c) from [] (__dev_change_flags+0x7c/0x134) [] (__dev_change_flags+0x7c/0x134) from [] (dev_change_flags+0x10/0x48) [] (dev_change_flags+0x10/0x48) from [] (do_setlink+0x1a0/0x730) [] (do_setlink+0x1a0/0x730) from [] (rtnl_newlink+0x304/0x4b0) [] (rtnl_newlink+0x304/0x4b0) from [] (rtnetlink_rcv_msg+0x25c/0x2a0) [] (rtnetlink_rcv_msg+0x25c/0x2a0) from [] (netlink_rcv_skb+0xbc/0xd8) [] (netlink_rcv_skb+0xbc/0xd8) from [] (rtnetlink_rcv+0x1c/0x24) [] (rtnetlink_rcv+0x1c/0x24) from [] (netlink_unicast_kernel+0x88/0xd4) [] (netlink_unicast_kernel+0x88/0xd4) from [] (netlink_unicast+0x138/0x180) [] (netlink_unicast+0x138/0x180) from [] (netlink_sendmsg+0x208/0x32c) [] (netlink_sendmsg+0x208/0x32c) from [] (sock_sendmsg+0x84/0xa4) [] (sock_sendmsg+0x84/0xa4) from [] (__sys_sendmsg+0x2ac/0x2c4) [] (__sys_sendmsg+0x2ac/0x2c4) from [] (sys_sendmsg+0x3c/0x68) [] (sys_sendmsg+0x3c/0x68) from [] (ret_fast_syscall+0x0/0x3c) It seems that txq_reclaim() takes the netif tx lock: __netif_tx_lock(nq, smp_processor_id()); in a context outside of softirq context, and thus is susceptible to deadlock should an interrupt occur. Use __netif_tx_lock_bh()/__netif_tx_unlock_bh() instead. Signed-off-by: Russell King Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c index 8f63c36..2ad1494 100644 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c @@ -867,7 +867,7 @@ static int txq_reclaim(struct tx_queue *txq, int budget, int force) struct netdev_queue *nq = netdev_get_tx_queue(mp->dev, txq->index); int reclaimed; - __netif_tx_lock(nq, smp_processor_id()); + __netif_tx_lock_bh(nq); reclaimed = 0; while (reclaimed < budget && txq->tx_desc_count > 0) { @@ -913,7 +913,7 @@ static int txq_reclaim(struct tx_queue *txq, int budget, int force) dev_kfree_skb(skb); } - __netif_tx_unlock(nq); + __netif_tx_unlock_bh(nq); if (reclaimed < budget) mp->work_tx &= ~(1 << txq->index); -- cgit v0.10.2 From b0ce3508b25ea6fa10ae3ca254de1d695b521702 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 16 May 2013 07:34:53 +0000 Subject: bonding: allow TSO being set on bonding master MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In some situations, we need to disable TSO on bonding slaves. bonding device automatically unset TSO in bond_fix_features(), and performance is not good because : 1) We consume more cpu cycles. 2) GSO segmentation has some bugs leading to out of order TCP packets if this segmentation is done before virtual device. This particular problem will be addressed in a separate patch. This patch allows TSO being set/unset on the bonding master, so that GSO segmentation is done after bonding layer. Signed-off-by: Eric Dumazet Cc: Michał Mirosław Cc: Jay Vosburgh Cc: Andy Gospodarek Cc: Maciej Żenczykowski Cc: Tom Herbert Cc: Neal Cardwell Cc: Yuchung Cheng Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index d0aade0..449ad9b 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1362,6 +1362,7 @@ static netdev_features_t bond_fix_features(struct net_device *dev, slave->dev->features, mask); } + features = netdev_add_tso_features(features, mask); out: read_unlock(&bond->lock); diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index a94a5a0..60584b1 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2733,6 +2733,17 @@ static inline netdev_features_t netdev_get_wanted_features( } netdev_features_t netdev_increment_features(netdev_features_t all, netdev_features_t one, netdev_features_t mask); + +/* Allow TSO being used on stacked device : + * Performing the GSO segmentation before last device + * is a performance improvement. + */ +static inline netdev_features_t netdev_add_tso_features(netdev_features_t features, + netdev_features_t mask) +{ + return netdev_increment_features(features, NETIF_F_ALL_TSO, mask); +} + int __netdev_update_features(struct net_device *dev); void netdev_update_features(struct net_device *dev); void netdev_change_features(struct net_device *dev); -- cgit v0.10.2 From ab2273c62dbec17432d40d2a78ce380f3d34a216 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 1 May 2013 12:27:31 -0700 Subject: staging: sep: fix driver build and kconfig Fix build errors in staging/sep/ by making DX_SEP depend on CRYPTO. drivers/built-in.o: In function `sep_sha1_init': sep_crypto.c:(.text+0x245ece): undefined reference to `crypto_enqueue_request' drivers/built-in.o: In function `sep_sha1_update': sep_crypto.c:(.text+0x245f4f): undefined reference to `crypto_enqueue_request' drivers/built-in.o: In function `sep_sha1_final': sep_crypto.c:(.text+0x245fcf): undefined reference to `crypto_enqueue_request' drivers/built-in.o: In function `sep_sha1_finup': sep_crypto.c:(.text+0x24604f): undefined reference to `crypto_enqueue_request' drivers/built-in.o: In function `sep_sha1_digest': sep_crypto.c:(.text+0x2460de): undefined reference to `crypto_enqueue_request' drivers/built-in.o:sep_crypto.c:(.text+0x24616e): more undefined references to `crypto_enqueue_request' follow drivers/built-in.o: In function `sep_crypto_block': sep_crypto.c:(.text+0x247c81): undefined reference to `ablkcipher_walk_phys' sep_crypto.c:(.text+0x247e40): undefined reference to `ablkcipher_walk_phys' drivers/built-in.o: In function `sep_dequeuer': sep_crypto.c:(.text+0x248ab9): undefined reference to `crypto_dequeue_request' sep_crypto.c:(.text+0x248afa): undefined reference to `crypto_ahash_type' sep_crypto.c:(.text+0x248fdf): undefined reference to `crypto_dequeue_request' drivers/built-in.o: In function `sep_crypto_setup': (.text+0x24902a): undefined reference to `crypto_init_queue' drivers/built-in.o: In function `sep_crypto_setup': (.text+0x24909c): undefined reference to `crypto_register_ahash' drivers/built-in.o: In function `sep_crypto_setup': (.text+0x2490c4): undefined reference to `crypto_register_alg' drivers/built-in.o: In function `sep_crypto_setup': (.text+0x2490f7): undefined reference to `crypto_unregister_alg' drivers/built-in.o: In function `sep_crypto_setup': (.text+0x249118): undefined reference to `crypto_unregister_ahash' drivers/built-in.o: In function `sep_crypto_takedown': (.text+0x249176): undefined reference to `crypto_unregister_ahash' drivers/built-in.o: In function `sep_crypto_takedown': (.text+0x249197): undefined reference to `crypto_unregister_alg' Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/sep/Kconfig b/drivers/staging/sep/Kconfig index 185b676..aab945a 100644 --- a/drivers/staging/sep/Kconfig +++ b/drivers/staging/sep/Kconfig @@ -1,6 +1,6 @@ config DX_SEP tristate "Discretix SEP driver" - depends on PCI + depends on PCI && CRYPTO help Discretix SEP driver; used for the security processor subsystem on board the Intel Mobile Internet Device and adds SEP availability -- cgit v0.10.2 From a5017b962059f7cec8f6d2dfb286ef3fbfbaab82 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 3 May 2013 15:21:46 +0100 Subject: =?UTF-8?q?staging:=20ste=5Frmi4:=20Suppress=20'ignoring=20return?= =?UTF-8?q?=20value=20of=20=E2=80=98regulator=5Fenable()'=20warning?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c: In function ‘synaptics_rmi4_resume’: drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c:1090:18: warning: ignoring return value of ‘regulator_enable’, declared with attribute warn_unused_result [-Wunused-result Cc: Greg Kroah-Hartman Cc: devel@driverdev.osuosl.org Acked-by: Srinidhi Kasagar Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c index fe667dd..386362c 100644 --- a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c +++ b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c @@ -1087,7 +1087,11 @@ static int synaptics_rmi4_resume(struct device *dev) unsigned char intr_status; struct synaptics_rmi4_data *rmi4_data = dev_get_drvdata(dev); - regulator_enable(rmi4_data->regulator); + retval = regulator_enable(rmi4_data->regulator); + if (retval) { + dev_err(dev, "Regulator enable failed (%d)\n", retval); + return retval; + } enable_irq(rmi4_data->i2c_client->irq); rmi4_data->touch_stopped = false; -- cgit v0.10.2 From fcce768067ae5f397ab5f96e2e471b9ba6a4bf96 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 2 May 2013 17:16:08 +0200 Subject: staging/drm: imx: add missing dependencies The imx DRM driver needs a couple of extra Kconfig dependencies to avoid random build failures: drivers/staging/imx-drm/ipuv3-crtc.c:448: undefined reference to `ipu_idmac_put' drivers/staging/imx-drm/ipuv3-crtc.c:450: undefined reference to `ipu_dmfc_put' drivers/staging/imx-drm/ipuv3-crtc.c:452: undefined reference to `ipu_dp_put' drivers/staging/imx-drm/ipuv3-crtc.c:454: undefined reference to `ipu_di_put' drivers/built-in.o: In function `ipu_probe': :(.text+0x4b4174): undefined reference to `device_reset' drivers/built-in.o: In function `imx_tve_probe': drivers/staging/imx-drm/imx-tve.c:648: undefined reference to `devm_regmap_init_mmio_clk' drivers/built-in.o: In function `imx_pd_connector_get_modes': drivers/staging/imx-drm/parallel-display.c:78: undefined reference to `of_get_drm_display_mode' Cc: Greg Kroah-Hartman Cc: Shawn Guo Cc: Philipp Zabel Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/imx-drm/Kconfig b/drivers/staging/imx-drm/Kconfig index 8c9e403..35ccda5 100644 --- a/drivers/staging/imx-drm/Kconfig +++ b/drivers/staging/imx-drm/Kconfig @@ -1,6 +1,7 @@ config DRM_IMX tristate "DRM Support for Freescale i.MX" select DRM_KMS_HELPER + select VIDEOMODE_HELPERS select DRM_GEM_CMA_HELPER select DRM_KMS_CMA_HELPER depends on DRM && (ARCH_MXC || ARCH_MULTIPLATFORM) @@ -23,6 +24,7 @@ config DRM_IMX_PARALLEL_DISPLAY config DRM_IMX_TVE tristate "Support for TV and VGA displays" depends on DRM_IMX + select REGMAP_MMIO help Choose this to enable the internal Television Encoder (TVe) found on i.MX53 processors. @@ -30,6 +32,7 @@ config DRM_IMX_TVE config DRM_IMX_IPUV3_CORE tristate "IPUv3 core support" depends on DRM_IMX + depends on RESET_CONTROLLER help Choose this if you have a i.MX5/6 system and want to use the IPU. This option only enables IPU base @@ -38,5 +41,6 @@ config DRM_IMX_IPUV3_CORE config DRM_IMX_IPUV3 tristate "DRM Support for i.MX IPUv3" depends on DRM_IMX + depends on DRM_IMX_IPUV3_CORE help Choose this if you have a i.MX5 or i.MX6 processor. -- cgit v0.10.2 From 8c090cfbf980581454ae4caae731574fedd7dce8 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 2 May 2013 17:16:23 +0200 Subject: staging/solo6x10: depend on CONFIG_FONTS The new SOLO6X10 driver needs the built-in console fonts, specifically the VGA8x16 font and building it without console support results in a link error error. drivers/built-in.o: In function `solo_osd_print': :(.text+0x7d3424): undefined reference to `find_font' This adds a dependency on the CONFIG_FONTS symbol and changes the console code to always build the base driver even if there are no specific fonts built-in. Cc: Greg Kroah-Hartman Cc: Hans Verkuil Cc: Mauro Carvalho Chehab Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/media/solo6x10/Kconfig b/drivers/staging/media/solo6x10/Kconfig index ec32776..df6569b 100644 --- a/drivers/staging/media/solo6x10/Kconfig +++ b/drivers/staging/media/solo6x10/Kconfig @@ -1,6 +1,7 @@ config SOLO6X10 tristate "Softlogic 6x10 MPEG codec cards" depends on PCI && VIDEO_DEV && SND && I2C + depends on FONTS select VIDEOBUF2_DMA_SG select VIDEOBUF2_DMA_CONTIG select SND_PCM diff --git a/drivers/video/console/Makefile b/drivers/video/console/Makefile index a862e91..48da25c 100644 --- a/drivers/video/console/Makefile +++ b/drivers/video/console/Makefile @@ -18,6 +18,8 @@ font-objs-$(CONFIG_FONT_MINI_4x6) += font_mini_4x6.o font-objs += $(font-objs-y) +obj-$(CONFIG_FONTS) += font.o + # Each configuration option enables a list of files. obj-$(CONFIG_DUMMY_CONSOLE) += dummycon.o -- cgit v0.10.2 From 410b6372d780da3e3594bc107139af9d049d3ac5 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 3 May 2013 22:56:15 +0200 Subject: staging: zcache: Fix incorrect module_param_array types MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drivers/staging/zcache/zcache-main.c: In function ‘__check_disable_cleancache’: drivers/staging/zcache/zcache-main.c:1928: warning: return from incompatible pointer type drivers/staging/zcache/zcache-main.c: In function ‘__check_disable_frontswap’: drivers/staging/zcache/zcache-main.c:1929: warning: return from incompatible pointer type drivers/staging/zcache/zcache-main.c: In function ‘__check_disable_frontswap_ignore_nonactive’: drivers/staging/zcache/zcache-main.c:1933: warning: return from incompatible pointer type Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/zcache/zcache-main.c b/drivers/staging/zcache/zcache-main.c index 522cb8e..dcceed2 100644 --- a/drivers/staging/zcache/zcache-main.c +++ b/drivers/staging/zcache/zcache-main.c @@ -1922,15 +1922,15 @@ out: #ifdef CONFIG_ZCACHE_MODULE #ifdef CONFIG_RAMSTER -module_param(ramster_enabled, int, S_IRUGO); +module_param(ramster_enabled, bool, S_IRUGO); module_param(disable_frontswap_selfshrink, int, S_IRUGO); #endif -module_param(disable_cleancache, int, S_IRUGO); -module_param(disable_frontswap, int, S_IRUGO); +module_param(disable_cleancache, bool, S_IRUGO); +module_param(disable_frontswap, bool, S_IRUGO); #ifdef FRONTSWAP_HAS_EXCLUSIVE_GETS module_param(frontswap_has_exclusive_gets, bool, S_IRUGO); #endif -module_param(disable_frontswap_ignore_nonactive, int, S_IRUGO); +module_param(disable_frontswap_ignore_nonactive, bool, S_IRUGO); module_param(zcache_comp_name, charp, S_IRUGO); module_init(zcache_init); MODULE_LICENSE("GPL"); -- cgit v0.10.2 From bd471258f2e0911f29d5dc3e1689de35518a157a Mon Sep 17 00:00:00 2001 From: Xiong Zhou Date: Wed, 8 May 2013 18:52:48 +0800 Subject: staging: android: logger: use kuid_t instead of uid_t Use kuid_t instead of uid_t, to pass the UIDGID_STRICT_TYPE_CHECKS. Signed-off-by: Xiong Zhou Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/android/logger.c b/drivers/staging/android/logger.c index b040200..9bd8747 100644 --- a/drivers/staging/android/logger.c +++ b/drivers/staging/android/logger.c @@ -242,7 +242,7 @@ static ssize_t do_read_log_to_user(struct logger_log *log, * 'log->buffer' which contains the first entry readable by 'euid' */ static size_t get_next_entry_by_uid(struct logger_log *log, - size_t off, uid_t euid) + size_t off, kuid_t euid) { while (off != log->w_off) { struct logger_entry *entry; @@ -251,7 +251,7 @@ static size_t get_next_entry_by_uid(struct logger_log *log, entry = get_entry_header(log, off, &scratch); - if (entry->euid == euid) + if (uid_eq(entry->euid, euid)) return off; next_len = sizeof(struct logger_entry) + entry->len; diff --git a/drivers/staging/android/logger.h b/drivers/staging/android/logger.h index cc6bbd9..70af7d8 100644 --- a/drivers/staging/android/logger.h +++ b/drivers/staging/android/logger.h @@ -66,7 +66,7 @@ struct logger_entry { __s32 tid; __s32 sec; __s32 nsec; - uid_t euid; + kuid_t euid; char msg[0]; }; -- cgit v0.10.2 From 2ea86d5ac6f5c850d719aa79de12c9af53bb244b Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 16 May 2013 15:18:29 +0200 Subject: staging: Swap zram and zsmalloc in Kconfig ZRAM support depends on ZSMALLOC so present ZSMALLOC to the user first. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 4e8a179..aefe820 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -72,10 +72,10 @@ source "drivers/staging/sep/Kconfig" source "drivers/staging/iio/Kconfig" -source "drivers/staging/zram/Kconfig" - source "drivers/staging/zsmalloc/Kconfig" +source "drivers/staging/zram/Kconfig" + source "drivers/staging/wlags49_h2/Kconfig" source "drivers/staging/wlags49_h25/Kconfig" -- cgit v0.10.2 From 3993eff9da7cac9749ba2b5812873d3a903dfd8c Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 3 May 2013 08:52:32 +0100 Subject: mfd: ab8500: Debugfs code depends on gpadc The AB8500_DEBUG code specifically requires access to the gpadc code, not just the common ab8500 driver. drivers/built-in.o: In function `ab8500_gpadc_bat_ctrl_print': mfd/ab8500-debugfs.c:1733: undefined reference to `ab8500_gpadc_get' mfd/ab8500-debugfs.c:1734: undefined reference to `ab8500_gpadc_read_raw' mfd/ab8500-debugfs.c:1736: undefined reference to `ab8500_gpadc_ad_to_voltage' Signed-off-by: Arnd Bergmann Signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 5ea1f8c..d54e985 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -579,7 +579,7 @@ config AB8500_CORE config AB8500_DEBUG bool "Enable debug info via debugfs" - depends on AB8500_CORE && DEBUG_FS + depends on AB8500_GPADC && DEBUG_FS default y if DEBUG_FS help Select this option if you want debug information using the debug -- cgit v0.10.2 From 194bd7cf1d19aac8da116ed3137c3a3cf622572b Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Fri, 26 Apr 2013 14:17:14 +0200 Subject: mfd: abx500-core: Fix sparse warning Fix sparse warning: drivers/mfd/abx500-core.c:159:38: warning: Using plain integer as NULL pointer Acked-by: Linus Walleij Signed-off-by: Fabio Baltieri Signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/abx500-core.c b/drivers/mfd/abx500-core.c index 9818afb..3714acb 100644 --- a/drivers/mfd/abx500-core.c +++ b/drivers/mfd/abx500-core.c @@ -156,7 +156,7 @@ EXPORT_SYMBOL(abx500_startup_irq_enabled); void abx500_dump_all_banks(void) { struct abx500_ops *ops; - struct device dummy_child = {0}; + struct device dummy_child = {NULL}; struct abx500_device_entry *dev_entry; list_for_each_entry(dev_entry, &abx500_list, list) { -- cgit v0.10.2 From 3d2088a14d949651f8b799d425ecbd684e35348b Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Fri, 26 Apr 2013 14:17:15 +0200 Subject: mfd: ab8500-sysctrl: Fix sparse warning Fix sparse warning: drivers/mfd/ab8500-sysctrl.c:26:6: warning: symbol 'ab8500_power_off' was not declared. Should it be static? Acked-by: Linus Walleij Signed-off-by: Fabio Baltieri Signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c index fbca1ce..640495e 100644 --- a/drivers/mfd/ab8500-sysctrl.c +++ b/drivers/mfd/ab8500-sysctrl.c @@ -23,7 +23,7 @@ static struct device *sysctrl_dev; -void ab8500_power_off(void) +static void ab8500_power_off(void) { sigset_t old; sigset_t all; -- cgit v0.10.2 From 9f7af61a93fc96ae7e55d6a292f5cc7decba5ad2 Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Fri, 26 Apr 2013 14:17:17 +0200 Subject: mfd: ab8500-sysctrl: Set sysctrl_dev during probe The driver requires sysctrl_dev to be set at probe, as it's used by other driver functions. This was dropped by mistake in: 2377e52 mfd: ab8500-sysctrl: Error check clean up making all driver functions fail. Acked-by: Linus Walleij Signed-off-by: Fabio Baltieri Signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c index 640495e..b851692 100644 --- a/drivers/mfd/ab8500-sysctrl.c +++ b/drivers/mfd/ab8500-sysctrl.c @@ -191,6 +191,8 @@ static int ab8500_sysctrl_probe(struct platform_device *pdev) if (!(plat && plat->sysctrl)) return -EINVAL; + sysctrl_dev = &pdev->dev; + if (plat->pm_power_off) pm_power_off = ab8500_power_off; -- cgit v0.10.2 From 33a0d1907fb442cd59b8e2eb83be79c4ab1cb791 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 2 May 2013 15:46:34 +0100 Subject: mfd: ab8500-gpadc: Suppress 'ignoring regulator_enable() return value' warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drivers/mfd/ab8500-gpadc.c: In function ‘ab8500_gpadc_resume’: drivers/mfd/ab8500-gpadc.c:911:18: warning: ignoring return value of ‘regulator_enable’, declared with attribute warn_unused_result [-Wunused-result] Acked-by: Linus Walleij Acked-by: Srinidhi Kasagar Signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c index 5e65b28..13f7866 100644 --- a/drivers/mfd/ab8500-gpadc.c +++ b/drivers/mfd/ab8500-gpadc.c @@ -907,14 +907,17 @@ static int ab8500_gpadc_suspend(struct device *dev) static int ab8500_gpadc_resume(struct device *dev) { struct ab8500_gpadc *gpadc = dev_get_drvdata(dev); + int ret; - regulator_enable(gpadc->regu); + ret = regulator_enable(gpadc->regu); + if (ret) + dev_err(dev, "Failed to enable vtvout LDO: %d\n", ret); pm_runtime_mark_last_busy(gpadc->dev); pm_runtime_put_autosuspend(gpadc->dev); mutex_unlock(&gpadc->ab8500_gpadc_lock); - return 0; + return ret; } static int ab8500_gpadc_probe(struct platform_device *pdev) -- cgit v0.10.2 From 6999181eecb11863b78030c68037a9f851522735 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 12 Apr 2013 17:02:09 +0200 Subject: mfd: ab8500: Pass AB8500 IRQ to debugfs code by resource The AB8500 debug code which was merged in parallell with the multiplatform work incidentally introduced a new instance using the header which is now deleted, causing this build regression: drivers/mfd/ab8500-debugfs.c:95:23: fatal error: mach/irqs.h: No such file or directory compilation terminated. make[4]: *** [drivers/mfd/ab8500-debugfs.o] Error 1 The code most certainly never worked with device tree either since that does not rely on this kind of hard-coded interrupt numbers. Fix the problem at the root by passing it as a named resource from the ab8500-core driver. Use an untyped resource to stop the MFD core from remapping this IRQ relative to the AB8500 irqdomain. Signed-off-by: Linus Walleij Signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 8e8a016..65cd46b 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -868,6 +868,15 @@ static struct resource ab8500_chargalg_resources[] = {}; #ifdef CONFIG_DEBUG_FS static struct resource ab8500_debug_resources[] = { { + .name = "IRQ_AB8500", + /* + * Number will be filled in. NOTE: this is deliberately + * not flagged as an IRQ in ordet to avoid remapping using + * the irqdomain in the MFD core, so that this IRQ passes + * unremapped to the debug code. + */ + }, + { .name = "IRQ_FIRST", .start = AB8500_INT_MAIN_EXT_CH_NOT_OK, .end = AB8500_INT_MAIN_EXT_CH_NOT_OK, @@ -1712,6 +1721,12 @@ static int ab8500_probe(struct platform_device *pdev) if (ret) return ret; +#if CONFIG_DEBUG_FS + /* Pass to debugfs */ + ab8500_debug_resources[0].start = ab8500->irq; + ab8500_debug_resources[0].end = ab8500->irq; +#endif + if (is_ab9540(ab8500)) ret = mfd_add_devices(ab8500->dev, 0, ab9540_devs, ARRAY_SIZE(ab9540_devs), NULL, diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c index b88bbbc..37b7ce4 100644 --- a/drivers/mfd/ab8500-debugfs.c +++ b/drivers/mfd/ab8500-debugfs.c @@ -91,12 +91,10 @@ #include #endif -/* TODO: this file should not reference IRQ_DB8500_AB8500! */ -#include - static u32 debug_bank; static u32 debug_address; +static int irq_ab8500; static int irq_first; static int irq_last; static u32 *irq_count; @@ -1589,7 +1587,7 @@ void ab8500_debug_register_interrupt(int line) { if (line < num_interrupt_lines) { num_interrupts[line]++; - if (suspend_test_wake_cause_interrupt_is_mine(IRQ_DB8500_AB8500)) + if (suspend_test_wake_cause_interrupt_is_mine(irq_ab8500)) num_wake_interrupts[line]++; } } @@ -2941,6 +2939,7 @@ static int ab8500_debug_probe(struct platform_device *plf) struct dentry *file; int ret = -ENOMEM; struct ab8500 *ab8500; + struct resource *res; debug_bank = AB8500_MISC; debug_address = AB8500_REV_REG & 0x00FF; @@ -2959,6 +2958,15 @@ static int ab8500_debug_probe(struct platform_device *plf) if (!event_name) goto out_freedev_attr; + res = platform_get_resource_byname(plf, 0, "IRQ_AB8500"); + if (!res) { + dev_err(&plf->dev, "AB8500 irq not found, err %d\n", + irq_first); + ret = -ENXIO; + goto out_freeevent_name; + } + irq_ab8500 = res->start; + irq_first = platform_get_irq_byname(plf, "IRQ_FIRST"); if (irq_first < 0) { dev_err(&plf->dev, "First irq not found, err %d\n", -- cgit v0.10.2 From eb696c3181dd5b2266794776519120abdfe127d9 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 7 May 2013 11:29:55 +0100 Subject: mfd: ab8500-core: Use the correct driver name when enabling gpio/pinctrl When we're using Device Tree to enable GPIO drivers we're forced to be OS agnostic, thus we are forbidden use names like pinctrl as they are specific only to Linux, at least for the time being. However, when we are registering devices using internal systems such as MFD or platform registration, we can use such terminology. In this case we can and should use the platform device ID mechanism to specify which device we wish to utilise by detailing pinctrl-. This patch fixes a regression that when booting with Device Tree enabled the ABx500 GPIO/Pinctrl devices are not probed. Acked-by: Linus Walleij Signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 65cd46b..1183e6d 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -1106,7 +1106,7 @@ static struct mfd_cell ab8500_devs[] = { .of_compatible = "stericsson,ab8500-denc", }, { - .name = "ab8500-gpio", + .name = "pinctrl-ab8500", .of_compatible = "stericsson,ab8500-gpio", }, { @@ -1243,7 +1243,7 @@ static struct mfd_cell ab8505_devs[] = { .name = "ab8500-leds", }, { - .name = "ab8500-gpio", + .name = "pinctrl-ab8505", }, { .name = "ab8500-usb", @@ -1311,7 +1311,7 @@ static struct mfd_cell ab8540_devs[] = { .resources = ab8500_temp_resources, }, { - .name = "ab8500-gpio", + .name = "pinctrl-ab8540", }, { .name = "ab8540-usb", -- cgit v0.10.2 From a3ef0deb0fa45781ab653d7c9271e02c152076f1 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 7 May 2013 12:01:32 +0100 Subject: mfd: db8500-prcmu: Supply the pdata_size attribute for db8500-thermal The MFD subsystem requires drivers to state the size of any platform data passed, or it will fail to assign it to the device. This will culminate in a NULL platform_data attribute and normally a failure to probe() or a kernel Oops. Acked-by: Linus Walleij Signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 319b8ab..5389368 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -3095,6 +3095,7 @@ static struct mfd_cell db8500_prcmu_devs[] = { .num_resources = ARRAY_SIZE(db8500_thsens_resources), .resources = db8500_thsens_resources, .platform_data = &db8500_thsens_data, + .pdata_size = sizeof(db8500_thsens_data), }, }; -- cgit v0.10.2 From 955de2eab3fd89bc6d5735817710926ba5817450 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 8 May 2013 14:29:09 +0100 Subject: mfd: ab8500-core: Pass GPADC compatible string to MFD core When booting with Device Tree enabled the MFD core uses each device's compatible string to find and allocate its associated of_node pointer, which in turn is passed to the driver via the platform_device struct. Without it, the driver won't be able to interrogate the Device Tree or locate suitable regulators and will most likely fail to probe. Acked-by: Linus Walleij Signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 1183e6d..258b367 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -1060,6 +1060,7 @@ static struct mfd_cell ab8500_devs[] = { }, { .name = "ab8500-gpadc", + .of_compatible = "stericsson,ab8500-gpadc", .num_resources = ARRAY_SIZE(ab8500_gpadc_resources), .resources = ab8500_gpadc_resources, }, @@ -1217,6 +1218,7 @@ static struct mfd_cell ab8505_devs[] = { }, { .name = "ab8500-gpadc", + .of_compatible = "stericsson,ab8500-gpadc", .num_resources = ARRAY_SIZE(ab8505_gpadc_resources), .resources = ab8505_gpadc_resources, }, @@ -1280,6 +1282,7 @@ static struct mfd_cell ab8540_devs[] = { }, { .name = "ab8500-gpadc", + .of_compatible = "stericsson,ab8500-gpadc", .num_resources = ARRAY_SIZE(ab8505_gpadc_resources), .resources = ab8505_gpadc_resources, }, -- cgit v0.10.2 From 0b8ebdb18888c55588b932f4f564b9c9529de627 Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Thu, 9 May 2013 13:08:08 +0200 Subject: mfd: ab8500-sysctrl: Always enable pm_power_off handler AB8500 sysctrl driver implements a pm_power_off handler, but that is currently not registered until a specific platform data field is enabled. This patch drops the platform data field and always registers ab8500_power_off if no other pm_power_off handler was defined before, and also introduces the necessary cleanup code in the driver's remove function. Acked-by: Linus Walleij Signed-off-by: Fabio Baltieri Signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c index b851692..0c20361 100644 --- a/drivers/mfd/ab8500-sysctrl.c +++ b/drivers/mfd/ab8500-sysctrl.c @@ -193,7 +193,7 @@ static int ab8500_sysctrl_probe(struct platform_device *pdev) sysctrl_dev = &pdev->dev; - if (plat->pm_power_off) + if (!pm_power_off) pm_power_off = ab8500_power_off; pdata = plat->sysctrl; @@ -228,6 +228,10 @@ static int ab8500_sysctrl_probe(struct platform_device *pdev) static int ab8500_sysctrl_remove(struct platform_device *pdev) { sysctrl_dev = NULL; + + if (pm_power_off == ab8500_power_off) + pm_power_off = NULL; + return 0; } diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h index fb1bf7d..0390d59 100644 --- a/include/linux/mfd/abx500/ab8500.h +++ b/include/linux/mfd/abx500/ab8500.h @@ -373,13 +373,11 @@ struct ab8500_sysctrl_platform_data; /** * struct ab8500_platform_data - AB8500 platform data * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used - * @pm_power_off: Should machine pm power off hook be registered or not * @init: board-specific initialization after detection of ab8500 * @regulator: machine-specific constraints for regulators */ struct ab8500_platform_data { int irq_base; - bool pm_power_off; void (*init) (struct ab8500 *); struct ab8500_regulator_platform_data *regulator; struct abx500_gpio_platform_data *gpio; -- cgit v0.10.2 From e9d7b4b5691cac4dce6c5eed9e217e50e24edef7 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Tue, 14 May 2013 15:14:55 +0200 Subject: mfd: db8500-prcmu: Update stored DSI PLL divider value Previously the DSI PLL divider rate was initialised statically and assumed to be 1. Before the common clock framework was enabled for ux500, a call to clk_set_rate() would always update the HW registers no matter what the current setting was. This patch makes sure the actual hw settings and the sw assumed settings are matched. Signed-off-by: Paer-Olof Haakansson Signed-off-by: Ulf Hansson signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 5389368..66f8097 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -1613,6 +1613,8 @@ static unsigned long dsiclk_rate(u8 n) if (divsel == PRCM_DSI_PLLOUT_SEL_OFF) divsel = dsiclk[n].divsel; + else + dsiclk[n].divsel = divsel; switch (divsel) { case PRCM_DSI_PLLOUT_SEL_PHI_4: -- cgit v0.10.2 From 91ec61f8f01cf32868e2ed2fa96a299e77964055 Mon Sep 17 00:00:00 2001 From: Malcolm Priestley Date: Wed, 15 May 2013 01:44:25 +0100 Subject: staging: vt6656: [bug] Fix missing spin lock in iwctl_siwpower. Fixes occasional dead lock on power up / down. spin_lock_irq is used because of unlocking with spin_unlock_irq elsewhere in the driver. Only relevant to kernels 3.8 and later when command was transferred to the iw_handler. Signed-off-by: Malcolm Priestley Cc: stable@vger.kernel.org # 3.8+ Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/vt6656/iwctl.c b/drivers/staging/vt6656/iwctl.c index c335808..d0cf7d8 100644 --- a/drivers/staging/vt6656/iwctl.c +++ b/drivers/staging/vt6656/iwctl.c @@ -1345,9 +1345,12 @@ int iwctl_siwpower(struct net_device *dev, struct iw_request_info *info, return rc; } + spin_lock_irq(&pDevice->lock); + if (wrq->disabled) { pDevice->ePSMode = WMAC_POWER_CAM; PSvDisablePowerSaving(pDevice); + spin_unlock_irq(&pDevice->lock); return rc; } if ((wrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) { @@ -1358,6 +1361,9 @@ int iwctl_siwpower(struct net_device *dev, struct iw_request_info *info, pDevice->ePSMode = WMAC_POWER_FAST; PSvEnablePowerSaving((void *)pDevice, pMgmt->wListenInterval); } + + spin_unlock_irq(&pDevice->lock); + switch (wrq->flags & IW_POWER_MODE) { case IW_POWER_UNICAST_R: DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWPOWER: IW_POWER_UNICAST_R \n"); -- cgit v0.10.2 From 7c8bfed7aaeba690de30835fe89882e1047a55fd Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Fri, 26 Apr 2013 13:25:01 -0700 Subject: usb, chipidea: fix link error when USB_EHCI_HCD is a module Fixes link error when USB_EHCI_HCD=m and USB_CHIPIDEA_HOST=y: drivers/built-in.o: In function `ci_hdrc_host_init': drivers/usb/chipidea/host.c:104: undefined reference to `ehci_init_driver' as a result of commit 09f6ffde2ece ("USB: EHCI: fix build error by making ChipIdea host a normal EHCI driver"). Cc: stable@vger.kernel.org [v3.7+] Signed-off-by: David Rientjes Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig index 608a2ae..b2df442 100644 --- a/drivers/usb/chipidea/Kconfig +++ b/drivers/usb/chipidea/Kconfig @@ -20,7 +20,7 @@ config USB_CHIPIDEA_UDC config USB_CHIPIDEA_HOST bool "ChipIdea host controller" depends on USB=y || USB=USB_CHIPIDEA - depends on USB_EHCI_HCD + depends on USB_EHCI_HCD=y select USB_EHCI_ROOT_HUB_TT help Say Y here to enable host controller functionality of the -- cgit v0.10.2 From 1c9e55cda44d770ce4e519f9672a4f11e87a2160 Mon Sep 17 00:00:00 2001 From: Wei WANG Date: Sat, 27 Apr 2013 10:49:13 +0800 Subject: USB: usb-stor: realtek_cr: Fix compile error To fix the compile error when CONFIG_PM_RUNTIME is not enabled, move the declaration of us out of CONFIG_REALTEK_AUTOPM macro in rts51x_chip. drivers/usb/storage/realtek_cr.c: In function 'realtek_cr_destructor': drivers/usb/storage/realtek_cr.c:942:11: error: 'struct rts51x_chip' has no member named 'us' Signed-off-by: Wei WANG Reported-by: Randy Dunlap Acked-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c index 8623577..281be56 100644 --- a/drivers/usb/storage/realtek_cr.c +++ b/drivers/usb/storage/realtek_cr.c @@ -105,8 +105,9 @@ struct rts51x_chip { int status_len; u32 flag; -#ifdef CONFIG_REALTEK_AUTOPM struct us_data *us; + +#ifdef CONFIG_REALTEK_AUTOPM struct timer_list rts51x_suspend_timer; unsigned long timer_expires; int pwr_state; @@ -988,6 +989,7 @@ static int init_realtek_cr(struct us_data *us) us->extra = chip; us->extra_destructor = realtek_cr_destructor; us->max_lun = chip->max_lun = rts51x_get_max_lun(us); + chip->us = us; usb_stor_dbg(us, "chip->max_lun = %d\n", chip->max_lun); @@ -1010,10 +1012,8 @@ static int init_realtek_cr(struct us_data *us) SET_AUTO_DELINK(chip); } #ifdef CONFIG_REALTEK_AUTOPM - if (ss_en) { - chip->us = us; + if (ss_en) realtek_cr_autosuspend_setup(us); - } #endif usb_stor_dbg(us, "chip->flag = 0x%x\n", chip->flag); -- cgit v0.10.2 From bac6b03275184c912ad0818c9a0a736847804dca Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 30 Apr 2013 10:18:04 +0200 Subject: USB: reset resume quirk needed by a hub Werner Fink has reported problems with this hub. Signed-off-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index ab5638d..a635988 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -88,6 +88,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Edirol SD-20 */ { USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Alcor Micro Corp. Hub */ + { USB_DEVICE(0x058f, 0x9254), .driver_info = USB_QUIRK_RESET_RESUME }, + /* appletouch */ { USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME }, -- cgit v0.10.2 From 843e56c02d6066ad2d8615562b652ae74b452a0e Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 2 May 2013 17:16:19 +0200 Subject: USB: EHCI: remove bogus #error The EHCI host controller driver can be built standalone now, without enabling any of the available bus glue drivers, so there is not really a reason to error out here: drivers/usb/host/ehci-hcd.c:1303:2: error: #error "missing bus glue for ehci-hcd" #error "missing bus glue for ehci-hcd" The alternative would be to change the Kconfig code to build the ehci-hcd module only if any of the symbols below are in fact enabled. Signed-off-by: Arnd Bergmann Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 312fc10..246e124 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1286,23 +1286,6 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_hcd_sead3_driver #endif -#if !IS_ENABLED(CONFIG_USB_EHCI_PCI) && \ - !IS_ENABLED(CONFIG_USB_EHCI_HCD_PLATFORM) && \ - !IS_ENABLED(CONFIG_USB_CHIPIDEA_HOST) && \ - !IS_ENABLED(CONFIG_USB_EHCI_MXC) && \ - !IS_ENABLED(CONFIG_USB_EHCI_HCD_OMAP) && \ - !IS_ENABLED(CONFIG_USB_EHCI_HCD_ORION) && \ - !IS_ENABLED(CONFIG_USB_EHCI_HCD_SPEAR) && \ - !IS_ENABLED(CONFIG_USB_EHCI_S5P) && \ - !IS_ENABLED(CONFIG_USB_EHCI_HCD_AT91) && \ - !IS_ENABLED(CONFIG_USB_EHCI_MSM) && \ - !defined(PLATFORM_DRIVER) && \ - !defined(PS3_SYSTEM_BUS_DRIVER) && \ - !defined(OF_PLATFORM_DRIVER) && \ - !defined(XILINX_OF_PLATFORM_DRIVER) -#error "missing bus glue for ehci-hcd" -#endif - static int __init ehci_hcd_init(void) { int retval = 0; -- cgit v0.10.2 From 73c042df6e1bc50544842a04b777b36bbe3630e6 Mon Sep 17 00:00:00 2001 From: Teppo Kotilainen Date: Fri, 3 May 2013 10:28:12 +0300 Subject: usb: option: Add Telewell TW-LTE 4G Information from driver description files: diag: VID_19D2&PID_0412&MI_00 nmea: VID_19D2&PID_0412&MI_01 at: VID_19D2&PID_0412&MI_02 modem: VID_19D2&PID_0412&MI_03 net: VID_19D2&PID_0412&MI_04 Signed-off-by: Teppo Kotilainen Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 7343728..13205c5 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -966,6 +966,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0330, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0395, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0412, 0xff, 0xff, 0xff), /* Telewell TW-LTE 4G */ + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0414, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0417, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff), -- cgit v0.10.2 From 8ff10bdb14a52e3f25d4ce09e0582a8684c1a6db Mon Sep 17 00:00:00 2001 From: Schemmel Hans-Christoph Date: Mon, 6 May 2013 11:05:12 +0200 Subject: USB: Blacklisted Cinterion's PLxx WWAN Interface /drivers/usb/serial/option.c: Blacklisted Cinterion's PLxx WWAN Interface (USB Interface 4), because it will be handled by QMI WWAN driver. Product IDs renamed. Signed-off-by: Hans-Christoph Schemmel Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 13205c5..d6bb98a 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -341,8 +341,8 @@ static void option_instat_callback(struct urb *urb); #define CINTERION_PRODUCT_EU3_E 0x0051 #define CINTERION_PRODUCT_EU3_P 0x0052 #define CINTERION_PRODUCT_PH8 0x0053 -#define CINTERION_PRODUCT_AH6 0x0055 -#define CINTERION_PRODUCT_PLS8 0x0060 +#define CINTERION_PRODUCT_AHXX 0x0055 +#define CINTERION_PRODUCT_PLXX 0x0060 /* Olivetti products */ #define OLIVETTI_VENDOR_ID 0x0b3c @@ -1266,8 +1266,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8) }, - { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AH6) }, - { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLS8) }, + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX) }, + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLXX), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) }, { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) }, -- cgit v0.10.2 From 3b9561e9d9b88eca9d4ed6aab025dec2eeeed501 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Tue, 7 May 2013 16:53:52 -0600 Subject: USB: set device dma_mask without reference to global data Many USB host drivers contain code such as: if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &tegra_ehci_dma_mask; ... where tegra_ehci_dma_mask is a global. I suspect this code originated in commit 4a53f4e "USB: ehci-tegra: add probing through device tree" and was simply copied everywhere else. This works fine when the code is built-in, but can cause a crash when the code is in a module. The first module load sets up the dma_mask pointer, but if the module is removed and re-inserted, the value is now non-NULL, and hence is not updated to point at the new location, and hence points at a stale location within the previous module load address, which in turn causes a crash if the pointer is de-referenced. The simplest way of solving this seems to be to copy the code from ehci-platform.c, which uses the coherent_dma_mask as the target for the dma_mask pointer. Suggested-by: Arnd Bergmann Signed-off-by: Stephen Warren Acked-by: Tony Prisk Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c index 8faec9d..73f9d5f 100644 --- a/drivers/usb/chipidea/ci13xxx_imx.c +++ b/drivers/usb/chipidea/ci13xxx_imx.c @@ -173,17 +173,10 @@ static int ci13xxx_imx_probe(struct platform_device *pdev) ci13xxx_imx_platdata.phy = data->phy; - if (!pdev->dev.dma_mask) { - pdev->dev.dma_mask = devm_kzalloc(&pdev->dev, - sizeof(*pdev->dev.dma_mask), GFP_KERNEL); - if (!pdev->dev.dma_mask) { - ret = -ENOMEM; - dev_err(&pdev->dev, "Failed to alloc dma_mask!\n"); - goto err; - } - *pdev->dev.dma_mask = DMA_BIT_MASK(32); - dma_set_coherent_mask(&pdev->dev, *pdev->dev.dma_mask); - } + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + if (!pdev->dev.coherent_dma_mask) + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); if (usbmisc_ops && usbmisc_ops->init) { ret = usbmisc_ops->init(&pdev->dev); diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index a8afe6e..929e7dd 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -95,8 +95,6 @@ static int dwc3_exynos_remove_child(struct device *dev, void *unused) return 0; } -static u64 dwc3_exynos_dma_mask = DMA_BIT_MASK(32); - static int dwc3_exynos_probe(struct platform_device *pdev) { struct dwc3_exynos *exynos; @@ -118,7 +116,9 @@ static int dwc3_exynos_probe(struct platform_device *pdev) * Once we move to full device tree support this will vanish off. */ if (!dev->dma_mask) - dev->dma_mask = &dwc3_exynos_dma_mask; + dev->dma_mask = &dev->coherent_dma_mask; + if (!dev->coherent_dma_mask) + dev->coherent_dma_mask = DMA_BIT_MASK(32); platform_set_drvdata(pdev, exynos); diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index 6642009..02f4611 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -63,8 +63,6 @@ static void atmel_stop_ehci(struct platform_device *pdev) /*-------------------------------------------------------------------------*/ -static u64 at91_ehci_dma_mask = DMA_BIT_MASK(32); - static int ehci_atmel_drv_probe(struct platform_device *pdev) { struct usb_hcd *hcd; @@ -93,7 +91,9 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev) * Once we have dma capability bindings this can go away. */ if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &at91_ehci_dma_mask; + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + if (!pdev->dev.coherent_dma_mask) + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd) { diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 3d1491b..16d7150 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -90,8 +90,6 @@ static const struct ehci_driver_overrides ehci_omap_overrides __initdata = { .extra_priv_size = sizeof(struct omap_hcd), }; -static u64 omap_ehci_dma_mask = DMA_BIT_MASK(32); - /** * ehci_hcd_omap_probe - initialize TI-based HCDs * @@ -146,8 +144,10 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &omap_ehci_dma_mask; + if (!dev->dma_mask) + dev->dma_mask = &dev->coherent_dma_mask; + if (!dev->coherent_dma_mask) + dev->coherent_dma_mask = DMA_BIT_MASK(32); hcd = usb_create_hcd(&ehci_omap_hc_driver, dev, dev_name(dev)); diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 54c5794..efbc588 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -137,8 +137,6 @@ ehci_orion_conf_mbus_windows(struct usb_hcd *hcd, } } -static u64 ehci_orion_dma_mask = DMA_BIT_MASK(32); - static int ehci_orion_drv_probe(struct platform_device *pdev) { struct orion_ehci_data *pd = pdev->dev.platform_data; @@ -183,7 +181,9 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) * now. Once we have dma capability bindings this can go away. */ if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &ehci_orion_dma_mask; + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + if (!pdev->dev.coherent_dma_mask) + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); if (!request_mem_region(res->start, resource_size(res), ehci_orion_hc_driver.description)) { diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c index 6357752..a81465e 100644 --- a/drivers/usb/host/ehci-s5p.c +++ b/drivers/usb/host/ehci-s5p.c @@ -71,8 +71,6 @@ static void s5p_setup_vbus_gpio(struct platform_device *pdev) dev_err(dev, "can't request ehci vbus gpio %d", gpio); } -static u64 ehci_s5p_dma_mask = DMA_BIT_MASK(32); - static int s5p_ehci_probe(struct platform_device *pdev) { struct s5p_ehci_platdata *pdata = pdev->dev.platform_data; @@ -90,7 +88,7 @@ static int s5p_ehci_probe(struct platform_device *pdev) * Once we move to full device tree support this will vanish off. */ if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &ehci_s5p_dma_mask; + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; if (!pdev->dev.coherent_dma_mask) pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c index 61ecfb3..bd3e5cb 100644 --- a/drivers/usb/host/ehci-spear.c +++ b/drivers/usb/host/ehci-spear.c @@ -58,8 +58,6 @@ static int ehci_spear_drv_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(ehci_spear_pm_ops, ehci_spear_drv_suspend, ehci_spear_drv_resume); -static u64 spear_ehci_dma_mask = DMA_BIT_MASK(32); - static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) { struct usb_hcd *hcd ; @@ -84,7 +82,9 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) * Once we have dma capability bindings this can go away. */ if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &spear_ehci_dma_mask; + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + if (!pdev->dev.coherent_dma_mask) + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); usbh_clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(usbh_clk)) { diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index e3eddc3..59d111b 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -637,8 +637,6 @@ static void tegra_ehci_set_phcd(struct usb_phy *x, bool enable) writel(val, base + TEGRA_USB_PORTSC1); } -static u64 tegra_ehci_dma_mask = DMA_BIT_MASK(32); - static int tegra_ehci_probe(struct platform_device *pdev) { struct resource *res; @@ -661,7 +659,9 @@ static int tegra_ehci_probe(struct platform_device *pdev) * Once we have dma capability bindings this can go away. */ if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &tegra_ehci_dma_mask; + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + if (!pdev->dev.coherent_dma_mask) + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); setup_vbus_gpio(pdev, pdata); diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index a0cb44f..2ee1496 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -504,8 +504,6 @@ static const struct of_device_id at91_ohci_dt_ids[] = { MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids); -static u64 at91_ohci_dma_mask = DMA_BIT_MASK(32); - static int ohci_at91_of_init(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; @@ -522,7 +520,9 @@ static int ohci_at91_of_init(struct platform_device *pdev) * Once we have dma capability bindings this can go away. */ if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &at91_ohci_dma_mask; + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + if (!pdev->dev.coherent_dma_mask) + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index 07592c0..b0b542c 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -98,8 +98,6 @@ static const struct hc_driver exynos_ohci_hc_driver = { .start_port_reset = ohci_start_port_reset, }; -static u64 ohci_exynos_dma_mask = DMA_BIT_MASK(32); - static int exynos_ohci_probe(struct platform_device *pdev) { struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data; @@ -117,7 +115,7 @@ static int exynos_ohci_probe(struct platform_device *pdev) * Once we move to full device tree support this will vanish off. */ if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &ohci_exynos_dma_mask; + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; if (!pdev->dev.coherent_dma_mask) pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c index ddfc314..8663851 100644 --- a/drivers/usb/host/ohci-omap3.c +++ b/drivers/usb/host/ohci-omap3.c @@ -114,8 +114,6 @@ static const struct hc_driver ohci_omap3_hc_driver = { /*-------------------------------------------------------------------------*/ -static u64 omap_ohci_dma_mask = DMA_BIT_MASK(32); - /* * configure so an HC device and id are always provided * always called with process context; sleeping is OK @@ -168,8 +166,10 @@ static int ohci_hcd_omap3_probe(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &omap_ohci_dma_mask; + if (!dev->dma_mask) + dev->dma_mask = &dev->coherent_dma_mask; + if (!dev->coherent_dma_mask) + dev->coherent_dma_mask = DMA_BIT_MASK(32); hcd = usb_create_hcd(&ohci_omap3_hc_driver, dev, dev_name(dev)); diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index efe71f3..279b2ef 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -282,8 +282,6 @@ static const struct of_device_id pxa_ohci_dt_ids[] = { MODULE_DEVICE_TABLE(of, pxa_ohci_dt_ids); -static u64 pxa_ohci_dma_mask = DMA_BIT_MASK(32); - static int ohci_pxa_of_init(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; @@ -298,7 +296,9 @@ static int ohci_pxa_of_init(struct platform_device *pdev) * Once we have dma capability bindings this can go away. */ if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pxa_ohci_dma_mask; + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + if (!pdev->dev.coherent_dma_mask) + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c index 9020bf0..3e19e01 100644 --- a/drivers/usb/host/ohci-spear.c +++ b/drivers/usb/host/ohci-spear.c @@ -91,8 +91,6 @@ static const struct hc_driver ohci_spear_hc_driver = { .start_port_reset = ohci_start_port_reset, }; -static u64 spear_ohci_dma_mask = DMA_BIT_MASK(32); - static int spear_ohci_hcd_drv_probe(struct platform_device *pdev) { const struct hc_driver *driver = &ohci_spear_hc_driver; @@ -114,7 +112,9 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev) * Once we have dma capability bindings this can go away. */ if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &spear_ohci_dma_mask; + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + if (!pdev->dev.coherent_dma_mask) + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); usbh_clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(usbh_clk)) { diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c index 8c4dace..f1db61a 100644 --- a/drivers/usb/host/uhci-platform.c +++ b/drivers/usb/host/uhci-platform.c @@ -60,8 +60,6 @@ static const struct hc_driver uhci_platform_hc_driver = { .hub_control = uhci_hub_control, }; -static u64 platform_uhci_dma_mask = DMA_BIT_MASK(32); - static int uhci_hcd_platform_probe(struct platform_device *pdev) { struct usb_hcd *hcd; @@ -78,7 +76,9 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev) * Once we have dma capability bindings this can go away. */ if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &platform_uhci_dma_mask; + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + if (!pdev->dev.coherent_dma_mask) + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); hcd = usb_create_hcd(&uhci_platform_hc_driver, &pdev->dev, pdev->name); -- cgit v0.10.2 From 0693196fe7bbb5e6cafd255dfce91ff6d10bc18f Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sun, 5 May 2013 20:32:27 +0200 Subject: USB: serial: add wait_until_sent operation Add wait_until_sent operation which can be used to wait for hardware buffers to drain. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index cf75beb..31d2768 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -375,6 +375,22 @@ static int serial_chars_in_buffer(struct tty_struct *tty) return count; } +static void serial_wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial = port->serial; + + dev_dbg(tty->dev, "%s\n", __func__); + + if (!port->serial->type->wait_until_sent) + return; + + mutex_lock(&serial->disc_mutex); + if (!serial->disconnected) + port->serial->type->wait_until_sent(tty, timeout); + mutex_unlock(&serial->disc_mutex); +} + static void serial_throttle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; @@ -1191,6 +1207,7 @@ static const struct tty_operations serial_ops = { .unthrottle = serial_unthrottle, .break_ctl = serial_break, .chars_in_buffer = serial_chars_in_buffer, + .wait_until_sent = serial_wait_until_sent, .tiocmget = serial_tiocmget, .tiocmset = serial_tiocmset, .get_icount = serial_get_icount, diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index b9b0f7b4..afbb7ee 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -268,6 +268,7 @@ struct usb_serial_driver { struct usb_serial_port *port, struct ktermios *old); void (*break_ctl)(struct tty_struct *tty, int break_state); int (*chars_in_buffer)(struct tty_struct *tty); + void (*wait_until_sent)(struct tty_struct *tty, long timeout); void (*throttle)(struct tty_struct *tty); void (*unthrottle)(struct tty_struct *tty); int (*tiocmget)(struct tty_struct *tty); -- cgit v0.10.2 From dcf0105039660e951dfea348d317043d17988dfc Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 8 May 2013 17:51:43 +0200 Subject: USB: serial: add generic wait_until_sent implementation Add generic wait_until_sent implementation which polls for empty hardware buffers using the new port-operation tx_empty. The generic implementation will be used for all sub-drivers that implement tx_empty but does not define wait_until_sent. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 297665f..ba45170 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -253,6 +253,37 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty) } EXPORT_SYMBOL_GPL(usb_serial_generic_chars_in_buffer); +void usb_serial_generic_wait_until_sent(struct tty_struct *tty, long timeout) +{ + struct usb_serial_port *port = tty->driver_data; + unsigned int bps; + unsigned long period; + unsigned long expire; + + bps = tty_get_baud_rate(tty); + if (!bps) + bps = 9600; /* B0 */ + /* + * Use a poll-period of roughly the time it takes to send one + * character or at least one jiffy. + */ + period = max_t(unsigned long, (10 * HZ / bps), 1); + period = min_t(unsigned long, period, timeout); + + dev_dbg(&port->dev, "%s - timeout = %u ms, period = %u ms\n", + __func__, jiffies_to_msecs(timeout), + jiffies_to_msecs(period)); + expire = jiffies + timeout; + while (!port->serial->type->tx_empty(port)) { + schedule_timeout_interruptible(period); + if (signal_pending(current)) + break; + if (time_after(jiffies, expire)) + break; + } +} +EXPORT_SYMBOL_GPL(usb_serial_generic_wait_until_sent); + static int usb_serial_generic_submit_read_urb(struct usb_serial_port *port, int index, gfp_t mem_flags) { diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 31d2768..60caf9c 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1333,6 +1333,8 @@ static void usb_serial_operations_init(struct usb_serial_driver *device) set_to_generic_if_null(device, close); set_to_generic_if_null(device, write_room); set_to_generic_if_null(device, chars_in_buffer); + if (device->tx_empty) + set_to_generic_if_null(device, wait_until_sent); set_to_generic_if_null(device, read_bulk_callback); set_to_generic_if_null(device, write_bulk_callback); set_to_generic_if_null(device, process_read_urb); diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index afbb7ee..302ddf5 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -269,6 +269,7 @@ struct usb_serial_driver { void (*break_ctl)(struct tty_struct *tty, int break_state); int (*chars_in_buffer)(struct tty_struct *tty); void (*wait_until_sent)(struct tty_struct *tty, long timeout); + bool (*tx_empty)(struct usb_serial_port *port); void (*throttle)(struct tty_struct *tty); void (*unthrottle)(struct tty_struct *tty); int (*tiocmget)(struct tty_struct *tty); @@ -328,6 +329,8 @@ extern void usb_serial_generic_close(struct usb_serial_port *port); extern int usb_serial_generic_resume(struct usb_serial *serial); extern int usb_serial_generic_write_room(struct tty_struct *tty); extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty); +extern void usb_serial_generic_wait_until_sent(struct tty_struct *tty, + long timeout); extern void usb_serial_generic_read_bulk_callback(struct urb *urb); extern void usb_serial_generic_write_bulk_callback(struct urb *urb); extern void usb_serial_generic_throttle(struct tty_struct *tty); -- cgit v0.10.2 From c4133648bbce9e6b425a74cc890c8e4df51acaa9 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sun, 5 May 2013 20:32:29 +0200 Subject: USB: ftdi_sio: clean up get_modem_status Use usb-serial port rather than tty as argument to get_modem_status. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 242b577..1159fd4 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -925,7 +925,7 @@ static int ftdi_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static void ftdi_break_ctl(struct tty_struct *tty, int break_state); static int ftdi_chars_in_buffer(struct tty_struct *tty); -static int ftdi_get_modem_status(struct tty_struct *tty, +static int ftdi_get_modem_status(struct usb_serial_port *port, unsigned char status[2]); static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base); @@ -2068,7 +2068,7 @@ static int ftdi_chars_in_buffer(struct tty_struct *tty) goto out; /* Check if hardware buffer is empty. */ - ret = ftdi_get_modem_status(tty, buf); + ret = ftdi_get_modem_status(port, buf); if (ret == 2) { if (!(buf[1] & FTDI_RS_TEMT)) chars = 1; @@ -2268,10 +2268,9 @@ no_c_cflag_changes: * Returns the number of status bytes retrieved (device dependant), or * negative error code. */ -static int ftdi_get_modem_status(struct tty_struct *tty, +static int ftdi_get_modem_status(struct usb_serial_port *port, unsigned char status[2]) { - struct usb_serial_port *port = tty->driver_data; struct ftdi_private *priv = usb_get_serial_port_data(port); unsigned char *buf; int len; @@ -2336,7 +2335,7 @@ static int ftdi_tiocmget(struct tty_struct *tty) unsigned char buf[2]; int ret; - ret = ftdi_get_modem_status(tty, buf); + ret = ftdi_get_modem_status(port, buf); if (ret < 0) return ret; -- cgit v0.10.2 From a37025b5c702aaf87191cd75fcc42c54454f16f5 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sun, 5 May 2013 20:32:30 +0200 Subject: USB: ftdi_sio: fix chars_in_buffer overhead Use the new generic usb-serial wait_until_sent implementation to wait for hardware buffers to drain. This removes the need to check the hardware buffers in chars_in_buffer and thus removes the overhead introduced by commit 6f602912 ("usb: serial: ftdi_sio: Add missing chars_in_buffer function") without breaking tty_wait_until_sent (used by, for example, tcdrain, tcsendbreak and close). Reported-by: Stas Sergeev Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 1159fd4..a62a75a 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -924,7 +924,7 @@ static int ftdi_tiocmset(struct tty_struct *tty, static int ftdi_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static void ftdi_break_ctl(struct tty_struct *tty, int break_state); -static int ftdi_chars_in_buffer(struct tty_struct *tty); +static bool ftdi_tx_empty(struct usb_serial_port *port); static int ftdi_get_modem_status(struct usb_serial_port *port, unsigned char status[2]); @@ -961,7 +961,7 @@ static struct usb_serial_driver ftdi_sio_device = { .ioctl = ftdi_ioctl, .set_termios = ftdi_set_termios, .break_ctl = ftdi_break_ctl, - .chars_in_buffer = ftdi_chars_in_buffer, + .tx_empty = ftdi_tx_empty, }; static struct usb_serial_driver * const serial_drivers[] = { @@ -2056,27 +2056,18 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state) } -static int ftdi_chars_in_buffer(struct tty_struct *tty) +static bool ftdi_tx_empty(struct usb_serial_port *port) { - struct usb_serial_port *port = tty->driver_data; - int chars; unsigned char buf[2]; int ret; - chars = usb_serial_generic_chars_in_buffer(tty); - if (chars) - goto out; - - /* Check if hardware buffer is empty. */ ret = ftdi_get_modem_status(port, buf); if (ret == 2) { if (!(buf[1] & FTDI_RS_TEMT)) - chars = 1; + return false; } -out: - dev_dbg(&port->dev, "%s - %d\n", __func__, chars); - return chars; + return true; } /* old_termios contains the original termios settings and tty->termios contains -- cgit v0.10.2 From b16634adce951a7371be931487034f7365971ed0 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sun, 5 May 2013 20:32:31 +0200 Subject: USB: io_ti: fix chars_in_buffer overhead Use the new generic usb-serial wait_until_sent implementation to wait for hardware buffers to drain. This removes the need to check the hardware buffers in chars_in_buffer and thus removes the overhead introduced by commit 263e1f9f ("USB: io_ti: query hardware-buffer status in chars_in_buffer") without breaking tty_wait_until_sent (used by, for example, tcdrain, tcsendbreak and close). Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 158bf4b..1be6ba7 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2019,8 +2019,6 @@ static int edge_chars_in_buffer(struct tty_struct *tty) struct edgeport_port *edge_port = usb_get_serial_port_data(port); int chars = 0; unsigned long flags; - int ret; - if (edge_port == NULL) return 0; @@ -2028,16 +2026,22 @@ static int edge_chars_in_buffer(struct tty_struct *tty) chars = kfifo_len(&edge_port->write_fifo); spin_unlock_irqrestore(&edge_port->ep_lock, flags); - if (!chars) { - ret = tx_active(edge_port); - if (ret > 0) - chars = ret; - } - dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars); return chars; } +static bool edge_tx_empty(struct usb_serial_port *port) +{ + struct edgeport_port *edge_port = usb_get_serial_port_data(port); + int ret; + + ret = tx_active(edge_port); + if (ret > 0) + return false; + + return true; +} + static void edge_throttle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; @@ -2557,6 +2561,7 @@ static struct usb_serial_driver edgeport_1port_device = { .write = edge_write, .write_room = edge_write_room, .chars_in_buffer = edge_chars_in_buffer, + .tx_empty = edge_tx_empty, .break_ctl = edge_break, .read_int_callback = edge_interrupt_callback, .read_bulk_callback = edge_bulk_in_callback, @@ -2589,6 +2594,7 @@ static struct usb_serial_driver edgeport_2port_device = { .write = edge_write, .write_room = edge_write_room, .chars_in_buffer = edge_chars_in_buffer, + .tx_empty = edge_tx_empty, .break_ctl = edge_break, .read_int_callback = edge_interrupt_callback, .read_bulk_callback = edge_bulk_in_callback, -- cgit v0.10.2 From ff93b19eed0d5c124ee7168650a8e2e120ac8ea4 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sun, 5 May 2013 20:32:32 +0200 Subject: USB: ti_usb_3410_5052: fix chars_in_buffer overhead Use the new generic usb-serial wait_until_sent implementation to wait for hardware buffers to drain. This removes the need to check the hardware buffers in chars_in_buffer and thus removes the overhead introduced by commit 2c992cd73 ("USB: ti_usb_3410_5052: query hardware-buffer status in chars_in_buffer") without breaking tty_wait_until_sent (used by, for example, tcdrain, tcsendbreak and close). Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index cac47ae..c92c5ed 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -101,6 +101,7 @@ static int ti_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *data, int count); static int ti_write_room(struct tty_struct *tty); static int ti_chars_in_buffer(struct tty_struct *tty); +static bool ti_tx_empty(struct usb_serial_port *port); static void ti_throttle(struct tty_struct *tty); static void ti_unthrottle(struct tty_struct *tty); static int ti_ioctl(struct tty_struct *tty, @@ -222,6 +223,7 @@ static struct usb_serial_driver ti_1port_device = { .write = ti_write, .write_room = ti_write_room, .chars_in_buffer = ti_chars_in_buffer, + .tx_empty = ti_tx_empty, .throttle = ti_throttle, .unthrottle = ti_unthrottle, .ioctl = ti_ioctl, @@ -253,6 +255,7 @@ static struct usb_serial_driver ti_2port_device = { .write = ti_write, .write_room = ti_write_room, .chars_in_buffer = ti_chars_in_buffer, + .tx_empty = ti_tx_empty, .throttle = ti_throttle, .unthrottle = ti_unthrottle, .ioctl = ti_ioctl, @@ -684,8 +687,6 @@ static int ti_chars_in_buffer(struct tty_struct *tty) struct ti_port *tport = usb_get_serial_port_data(port); int chars = 0; unsigned long flags; - int ret; - u8 lsr; if (tport == NULL) return 0; @@ -694,16 +695,22 @@ static int ti_chars_in_buffer(struct tty_struct *tty) chars = kfifo_len(&tport->write_fifo); spin_unlock_irqrestore(&tport->tp_lock, flags); - if (!chars) { - ret = ti_get_lsr(tport, &lsr); - if (!ret && !(lsr & TI_LSR_TX_EMPTY)) - chars = 1; - } - dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars); return chars; } +static bool ti_tx_empty(struct usb_serial_port *port) +{ + struct ti_port *tport = usb_get_serial_port_data(port); + int ret; + u8 lsr; + + ret = ti_get_lsr(tport, &lsr); + if (!ret && !(lsr & TI_LSR_TX_EMPTY)) + return false; + + return true; +} static void ti_throttle(struct tty_struct *tty) { -- cgit v0.10.2 From 4746b6c6efcdc3f5ef84f0bc2c39707c6b4e5e24 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sun, 5 May 2013 20:32:33 +0200 Subject: USB: serial: clean up chars_in_buffer No need to grab disconnect mutex in chars_in_buffer now that no sub-driver is or should be querying hardware buffers anymore. (They should use wait_until_sent.) Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 60caf9c..4753c00 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -359,20 +359,13 @@ static int serial_chars_in_buffer(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; - int count = 0; dev_dbg(tty->dev, "%s\n", __func__); - mutex_lock(&serial->disc_mutex); - /* if the device was unplugged then any remaining characters - fell out of the connector ;) */ if (serial->disconnected) - count = 0; - else - count = serial->type->chars_in_buffer(tty); - mutex_unlock(&serial->disc_mutex); + return 0; - return count; + return serial->type->chars_in_buffer(tty); } static void serial_wait_until_sent(struct tty_struct *tty, int timeout) -- cgit v0.10.2 From 9a9ef7360e601cbe4c978742c115645e67bd6e25 Mon Sep 17 00:00:00 2001 From: Libo Chen Date: Thu, 9 May 2013 12:58:08 +0800 Subject: usb: ehci-s5p: fix memleak when fallback to pdata When devm_usb_get_phy fail, we should free hcd Signed-off-by: Libo Chen Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c index a81465e..379037f 100644 --- a/drivers/usb/host/ehci-s5p.c +++ b/drivers/usb/host/ehci-s5p.c @@ -105,6 +105,7 @@ static int s5p_ehci_probe(struct platform_device *pdev) if (IS_ERR(phy)) { /* Fallback to pdata */ if (!pdata) { + usb_put_hcd(hcd); dev_warn(&pdev->dev, "no platform data or transceiver defined\n"); return -EPROBE_DEFER; } else { -- cgit v0.10.2 From 72d9c8b68d013133b296ad8e63a30fb257351484 Mon Sep 17 00:00:00 2001 From: Libo Chen Date: Thu, 9 May 2013 12:58:09 +0800 Subject: usb: isp1760-if: fix memleak when platform_get_resource fail When platform_get_resource fail, we should release_mem_region Signed-off-by: Libo Chen Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c index bbb791b..a13709e 100644 --- a/drivers/usb/host/isp1760-if.c +++ b/drivers/usb/host/isp1760-if.c @@ -373,8 +373,10 @@ static int isp1760_plat_probe(struct platform_device *pdev) irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (!irq_res) { pr_warning("isp1760: IRQ resource not available\n"); - return -ENODEV; + ret = -ENODEV; + goto cleanup; } + irqflags |= irq_res->flags & IRQF_TRIGGER_MASK; if (priv) { -- cgit v0.10.2 From b3517d5de80ed7ba36977df71c437050389dca97 Mon Sep 17 00:00:00 2001 From: Libo Chen Date: Fri, 10 May 2013 14:22:42 +0800 Subject: usb: ohci: fix goto wrong tag in err case fix goto wrong tag in usb_hcd_nxp_probe Signed-off-by: Libo Chen Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c index f4988fb..2b61492 100644 --- a/drivers/usb/host/ohci-nxp.c +++ b/drivers/usb/host/ohci-nxp.c @@ -223,8 +223,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) isp1301_i2c_client = isp1301_get_client(isp1301_node); if (!isp1301_i2c_client) { - ret = -EPROBE_DEFER; - goto out; + return -EPROBE_DEFER; } pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); @@ -234,7 +233,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) if (usb_disabled()) { dev_err(&pdev->dev, "USB is disabled\n"); ret = -ENODEV; - goto out; + goto fail_disable; } /* Enable AHB slave USB clock, needed for further USB clock control */ @@ -245,19 +244,19 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) if (IS_ERR(usb_pll_clk)) { dev_err(&pdev->dev, "failed to acquire USB PLL\n"); ret = PTR_ERR(usb_pll_clk); - goto out1; + goto fail_pll; } ret = clk_enable(usb_pll_clk); if (ret < 0) { dev_err(&pdev->dev, "failed to start USB PLL\n"); - goto out2; + goto fail_pllen; } ret = clk_set_rate(usb_pll_clk, 48000); if (ret < 0) { dev_err(&pdev->dev, "failed to set USB clock rate\n"); - goto out3; + goto fail_rate; } /* Enable USB device clock */ @@ -265,13 +264,13 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) if (IS_ERR(usb_dev_clk)) { dev_err(&pdev->dev, "failed to acquire USB DEV Clock\n"); ret = PTR_ERR(usb_dev_clk); - goto out4; + goto fail_dev; } ret = clk_enable(usb_dev_clk); if (ret < 0) { dev_err(&pdev->dev, "failed to start USB DEV Clock\n"); - goto out5; + goto fail_deven; } /* Enable USB otg clocks */ @@ -279,7 +278,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) if (IS_ERR(usb_otg_clk)) { dev_err(&pdev->dev, "failed to acquire USB DEV Clock\n"); ret = PTR_ERR(usb_otg_clk); - goto out6; + goto fail_otg; } __raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL); @@ -287,7 +286,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) ret = clk_enable(usb_otg_clk); if (ret < 0) { dev_err(&pdev->dev, "failed to start USB DEV Clock\n"); - goto out7; + goto fail_otgen; } isp1301_configure(); @@ -296,20 +295,20 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) if (!hcd) { dev_err(&pdev->dev, "Failed to allocate HC buffer\n"); ret = -ENOMEM; - goto out8; + goto fail_hcd; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(&pdev->dev, "Failed to get MEM resource\n"); ret = -ENOMEM; - goto out8; + goto fail_resource; } hcd->regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(hcd->regs)) { ret = PTR_ERR(hcd->regs); - goto out8; + goto fail_resource; } hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); @@ -317,7 +316,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq < 0) { ret = -ENXIO; - goto out8; + goto fail_resource; } nxp_start_hc(); @@ -331,23 +330,24 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) return ret; nxp_stop_hc(); -out8: +fail_resource: usb_put_hcd(hcd); -out7: +fail_hcd: clk_disable(usb_otg_clk); -out6: +fail_otgen: clk_put(usb_otg_clk); -out5: +fail_otg: clk_disable(usb_dev_clk); -out4: +fail_deven: clk_put(usb_dev_clk); -out3: +fail_dev: +fail_rate: clk_disable(usb_pll_clk); -out2: +fail_pllen: clk_put(usb_pll_clk); -out1: +fail_pll: +fail_disable: isp1301_i2c_client = NULL; -out: return ret; } -- cgit v0.10.2 From 49c6e370dd6400b84897c4100095089b5c13a061 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 6 May 2013 16:16:44 -0500 Subject: USB: option: add device IDs for Dell 5804 (Novatel E371) WWAN card A rebranded Novatel E371 for AT&T's LTE bands. Cc: stable Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index d6bb98a..93d02bc 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -196,6 +196,7 @@ static void option_instat_callback(struct urb *urb); #define DELL_PRODUCT_5800_MINICARD_VZW 0x8195 /* Novatel E362 */ #define DELL_PRODUCT_5800_V2_MINICARD_VZW 0x8196 /* Novatel E362 */ +#define DELL_PRODUCT_5804_MINICARD_ATT 0x819b /* Novatel E371 */ #define KYOCERA_VENDOR_ID 0x0c88 #define KYOCERA_PRODUCT_KPC650 0x17da @@ -771,6 +772,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_VZW) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_MINICARD_VZW, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_V2_MINICARD_VZW, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5804_MINICARD_ATT, 0xff, 0xff, 0xff) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, /* ADU-E100, ADU-310 */ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) }, -- cgit v0.10.2 From a7b594b4905828b3bfc36be39d48b5e07a23c8e1 Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Tue, 30 Apr 2013 22:42:33 +0200 Subject: dummy-irq: require the user to specify an IRQ number Make sure that we let the user know that without specifying IRQ#, dummy-irq driver is useless. Reported-by: Dave Jones Signed-off-by: Jonathan Corbet Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/misc/dummy-irq.c b/drivers/misc/dummy-irq.c index 7014167..c37eeed 100644 --- a/drivers/misc/dummy-irq.c +++ b/drivers/misc/dummy-irq.c @@ -19,7 +19,7 @@ #include #include -static int irq; +static int irq = -1; static irqreturn_t dummy_interrupt(int irq, void *dev_id) { @@ -36,6 +36,10 @@ static irqreturn_t dummy_interrupt(int irq, void *dev_id) static int __init dummy_irq_init(void) { + if (irq < 0) { + printk(KERN_ERR "dummy-irq: no IRQ given. Use irq=N\n"); + return -EIO; + } if (request_irq(irq, &dummy_interrupt, IRQF_SHARED, "dummy_irq", &irq)) { printk(KERN_ERR "dummy-irq: cannot register IRQ %d\n", irq); return -EIO; -- cgit v0.10.2 From 221ba151731133c8b0e1cdb9bfd2a45b3ba8764b Mon Sep 17 00:00:00 2001 From: "salina@us.ibm.com" Date: Tue, 7 May 2013 16:18:09 +0200 Subject: Char: lp, protect LPGETSTATUS with port_mutex The patch fixes a problem in the lp driver that can cause oopses as follows: process A: calls lp_write, which in turn calls parport_ieee1284_write_compat, and that invokes parport_wait_peripheral process B: meanwhile does an ioctl(LPGETSTATUS), which call lp_release_parport when done. This function will set physport->cad = NULL. process A: parport_wait_peripheral tries to dereference physport->cad and dies So, protect that code with the port_mutex in order to protect against simultaneous calls to lp_read/lp_write. Similar protection is probably required for ioctl(LPRESET)... This patch was done by IBM a while back and we (at suse) have that since at least 2004 in our repos. Let's make it upstream. Signed-off-by: okir@suse.de Signed-off-by: Jiri Slaby Cc: Arnd Bergmann Cc: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/lp.c b/drivers/char/lp.c index dafd9ac..0913d79 100644 --- a/drivers/char/lp.c +++ b/drivers/char/lp.c @@ -622,9 +622,12 @@ static int lp_do_ioctl(unsigned int minor, unsigned int cmd, return -EFAULT; break; case LPGETSTATUS: + if (mutex_lock_interruptible(&lp_table[minor].port_mutex)) + return -EINTR; lp_claim_parport_or_block (&lp_table[minor]); status = r_str(minor); lp_release_parport (&lp_table[minor]); + mutex_unlock(&lp_table[minor].port_mutex); if (copy_to_user(argp, &status, sizeof(int))) return -EFAULT; -- cgit v0.10.2 From a6ac1bc341e499ad5296f265dfa8eba5afbf4191 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 14 May 2013 02:13:24 +0100 Subject: drm/qxl: fix ioport interactions for kernel submitted commands. So qxl has ioports, but it really really really doesn't want you to write to them twice, but if you write and get a signal before the irq arrives to let you know its completed, you have to think ahead and avoid writing another time. However this works fine for update area where really multiple writes aren't the end of the world, however with create primary surface, you can't ever do multiple writes. So this stop internal kernel writes from doing interruptible waits, because otherwise we have no idea if this write is a new one or a continuation of a previous one. virtual hw sucks more than real hw. This fixes lockups and VM crashes when resizing and starting/stopping X. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/qxl/qxl_cmd.c b/drivers/gpu/drm/qxl/qxl_cmd.c index 08b0823..f867714 100644 --- a/drivers/gpu/drm/qxl/qxl_cmd.c +++ b/drivers/gpu/drm/qxl/qxl_cmd.c @@ -277,7 +277,7 @@ out_unref: return 0; } -static int wait_for_io_cmd_user(struct qxl_device *qdev, uint8_t val, long port) +static int wait_for_io_cmd_user(struct qxl_device *qdev, uint8_t val, long port, bool intr) { int irq_num; long addr = qdev->io_base + port; @@ -285,20 +285,29 @@ static int wait_for_io_cmd_user(struct qxl_device *qdev, uint8_t val, long port) mutex_lock(&qdev->async_io_mutex); irq_num = atomic_read(&qdev->irq_received_io_cmd); - - if (qdev->last_sent_io_cmd > irq_num) { - ret = wait_event_interruptible(qdev->io_cmd_event, - atomic_read(&qdev->irq_received_io_cmd) > irq_num); - if (ret) + if (intr) + ret = wait_event_interruptible_timeout(qdev->io_cmd_event, + atomic_read(&qdev->irq_received_io_cmd) > irq_num, 5*HZ); + else + ret = wait_event_timeout(qdev->io_cmd_event, + atomic_read(&qdev->irq_received_io_cmd) > irq_num, 5*HZ); + /* 0 is timeout, just bail the "hw" has gone away */ + if (ret <= 0) goto out; irq_num = atomic_read(&qdev->irq_received_io_cmd); } outb(val, addr); qdev->last_sent_io_cmd = irq_num + 1; - ret = wait_event_interruptible(qdev->io_cmd_event, - atomic_read(&qdev->irq_received_io_cmd) > irq_num); + if (intr) + ret = wait_event_interruptible_timeout(qdev->io_cmd_event, + atomic_read(&qdev->irq_received_io_cmd) > irq_num, 5*HZ); + else + ret = wait_event_timeout(qdev->io_cmd_event, + atomic_read(&qdev->irq_received_io_cmd) > irq_num, 5*HZ); out: + if (ret > 0) + ret = 0; mutex_unlock(&qdev->async_io_mutex); return ret; } @@ -308,7 +317,7 @@ static void wait_for_io_cmd(struct qxl_device *qdev, uint8_t val, long port) int ret; restart: - ret = wait_for_io_cmd_user(qdev, val, port); + ret = wait_for_io_cmd_user(qdev, val, port, false); if (ret == -ERESTARTSYS) goto restart; } @@ -340,7 +349,7 @@ int qxl_io_update_area(struct qxl_device *qdev, struct qxl_bo *surf, mutex_lock(&qdev->update_area_mutex); qdev->ram_header->update_area = *area; qdev->ram_header->update_surface = surface_id; - ret = wait_for_io_cmd_user(qdev, 0, QXL_IO_UPDATE_AREA_ASYNC); + ret = wait_for_io_cmd_user(qdev, 0, QXL_IO_UPDATE_AREA_ASYNC, true); mutex_unlock(&qdev->update_area_mutex); return ret; } -- cgit v0.10.2 From d7292a07a1b3d0b31a54a3e949ed4dd99e9a85e8 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 13 May 2013 12:42:26 +1000 Subject: qxl: drop unused variable. this boolean isn't used anymore so drop it. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/qxl/qxl_display.c b/drivers/gpu/drm/qxl/qxl_display.c index fcfd443..735ddd2 100644 --- a/drivers/gpu/drm/qxl/qxl_display.c +++ b/drivers/gpu/drm/qxl/qxl_display.c @@ -604,7 +604,6 @@ static int qxl_crtc_mode_set(struct drm_crtc *crtc, mode->hdisplay, mode->vdisplay); } - qdev->mode_set = true; return 0; } diff --git a/drivers/gpu/drm/qxl/qxl_drv.h b/drivers/gpu/drm/qxl/qxl_drv.h index 52b582c..5b7c130 100644 --- a/drivers/gpu/drm/qxl/qxl_drv.h +++ b/drivers/gpu/drm/qxl/qxl_drv.h @@ -270,7 +270,6 @@ struct qxl_device { struct qxl_ring *cursor_ring; struct qxl_ram_header *ram_header; - bool mode_set; bool primary_created; -- cgit v0.10.2 From b2b4465d8bade681491e225fa6a5dc050820b004 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 13 May 2013 12:48:40 +1000 Subject: drm/qxl: drop active_user_framebuffer as its unneeded This was a bogus way to figure out what the active framebuffer was, just check if the underlying bo is the primary bo. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/qxl/qxl_display.c b/drivers/gpu/drm/qxl/qxl_display.c index 735ddd2..823d29e 100644 --- a/drivers/gpu/drm/qxl/qxl_display.c +++ b/drivers/gpu/drm/qxl/qxl_display.c @@ -428,10 +428,10 @@ static int qxl_framebuffer_surface_dirty(struct drm_framebuffer *fb, int inc = 1; qobj = gem_to_qxl_bo(qxl_fb->obj); - if (qxl_fb != qdev->active_user_framebuffer) { - DRM_INFO("%s: qxl_fb 0x%p != qdev->active_user_framebuffer 0x%p\n", - __func__, qxl_fb, qdev->active_user_framebuffer); - } + /* if we aren't primary surface ignore this */ + if (!qobj->is_primary) + return 0; + if (!num_clips) { num_clips = 1; clips = &norect; @@ -892,7 +892,6 @@ qxl_user_framebuffer_create(struct drm_device *dev, { struct drm_gem_object *obj; struct qxl_framebuffer *qxl_fb; - struct qxl_device *qdev = dev->dev_private; int ret; obj = drm_gem_object_lookup(dev, file_priv, mode_cmd->handles[0]); @@ -908,13 +907,6 @@ qxl_user_framebuffer_create(struct drm_device *dev, return NULL; } - if (qdev->active_user_framebuffer) { - DRM_INFO("%s: active_user_framebuffer %p -> %p\n", - __func__, - qdev->active_user_framebuffer, qxl_fb); - } - qdev->active_user_framebuffer = qxl_fb; - return &qxl_fb->base; } diff --git a/drivers/gpu/drm/qxl/qxl_drv.h b/drivers/gpu/drm/qxl/qxl_drv.h index 5b7c130..43d06ab 100644 --- a/drivers/gpu/drm/qxl/qxl_drv.h +++ b/drivers/gpu/drm/qxl/qxl_drv.h @@ -255,12 +255,6 @@ struct qxl_device { struct qxl_gem gem; struct qxl_mode_info mode_info; - /* - * last created framebuffer with fb_create - * only used by debugfs dumbppm - */ - struct qxl_framebuffer *active_user_framebuffer; - struct fb_info *fbdev_info; struct qxl_framebuffer *fbdev_qfb; void *ram_physical; -- cgit v0.10.2 From b90ed1e931c4d11cf32710c8a310b603effb5b11 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 9 May 2013 05:07:10 +0100 Subject: qxl: fix bug with object eviction and update area if the surface is evicted, this validation will happen to the wrong place, I noticed this with other work I was doing, haven't seen it go wrong in practice. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/qxl/qxl_ioctl.c b/drivers/gpu/drm/qxl/qxl_ioctl.c index 04b64f9..6db7370 100644 --- a/drivers/gpu/drm/qxl/qxl_ioctl.c +++ b/drivers/gpu/drm/qxl/qxl_ioctl.c @@ -294,6 +294,7 @@ static int qxl_update_area_ioctl(struct drm_device *dev, void *data, goto out; if (!qobj->pin_count) { + qxl_ttm_placement_from_domain(qobj, qobj->type); ret = ttm_bo_validate(&qobj->tbo, &qobj->placement, true, false); if (unlikely(ret)) -- cgit v0.10.2 From e9ced8e040ebe40e9953db90acbe7d0b58702ebb Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 15 May 2013 01:23:36 +0000 Subject: drm/radeon: restore nomodeset operation (v2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When UMS was deprecated it removed support for nomodeset commandline we really want this in distro land so we can debug stuff, everyone should fallback to vesa correctly. v2: oops -1 isn't used anymore, restore original behaviour -1 is default, so we can boot with nomodeset on the command line, then use radeon.modeset=1 to override it for debugging later. Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher Reviewed-by: Christian König Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index d33f484..094e7e5 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -147,7 +147,7 @@ static inline void radeon_unregister_atpx_handler(void) {} #endif int radeon_no_wb; -int radeon_modeset = 1; +int radeon_modeset = -1; int radeon_dynclks = -1; int radeon_r4xx_atom = 0; int radeon_agpmode = 0; @@ -456,6 +456,16 @@ static struct pci_driver radeon_kms_pci_driver = { static int __init radeon_init(void) { +#ifdef CONFIG_VGA_CONSOLE + if (vgacon_text_force() && radeon_modeset == -1) { + DRM_INFO("VGACON disable radeon kernel modesetting.\n"); + radeon_modeset = 0; + } +#endif + /* set to modesetting by default if not nomodeset */ + if (radeon_modeset == -1) + radeon_modeset = 1; + if (radeon_modeset == 1) { DRM_INFO("radeon kernel modesetting enabled.\n"); driver = &kms_driver; -- cgit v0.10.2 From e6135fe960bba1d1a3a6b6818839e6d8d3f21293 Mon Sep 17 00:00:00 2001 From: Torstein Hegge Date: Thu, 16 May 2013 20:26:17 +0200 Subject: ALSA: usb-audio: proc: use found syncmaxsize to determine feedback format freqshift is only set for the data endpoint and syncmaxsize is only set for the sync endpoint. This results in a syncmaxsize of zero used in the proc output feedback format calculation, which gives a feedback format incorrectly shown as 8.16 for UAC2 devices. As neither the data nor the sync endpoint gives all the relevant content, output the two combined. Also remove the sync_endpoint "packet size" which is always zero and the sync_endpoint "momentary freq" which is constant. Tested with UAC2 async and UAC1 adaptive, not tested with UAC1 async. Reported-by: B. Zhang Signed-off-by: Torstein Hegge Signed-off-by: Takashi Iwai diff --git a/sound/usb/proc.c b/sound/usb/proc.c index 135c768..5f761ab 100644 --- a/sound/usb/proc.c +++ b/sound/usb/proc.c @@ -116,21 +116,22 @@ static void proc_dump_substream_formats(struct snd_usb_substream *subs, struct s } static void proc_dump_ep_status(struct snd_usb_substream *subs, - struct snd_usb_endpoint *ep, + struct snd_usb_endpoint *data_ep, + struct snd_usb_endpoint *sync_ep, struct snd_info_buffer *buffer) { - if (!ep) + if (!data_ep) return; - snd_iprintf(buffer, " Packet Size = %d\n", ep->curpacksize); + snd_iprintf(buffer, " Packet Size = %d\n", data_ep->curpacksize); snd_iprintf(buffer, " Momentary freq = %u Hz (%#x.%04x)\n", subs->speed == USB_SPEED_FULL - ? get_full_speed_hz(ep->freqm) - : get_high_speed_hz(ep->freqm), - ep->freqm >> 16, ep->freqm & 0xffff); - if (ep->freqshift != INT_MIN) { - int res = 16 - ep->freqshift; + ? get_full_speed_hz(data_ep->freqm) + : get_high_speed_hz(data_ep->freqm), + data_ep->freqm >> 16, data_ep->freqm & 0xffff); + if (sync_ep && data_ep->freqshift != INT_MIN) { + int res = 16 - data_ep->freqshift; snd_iprintf(buffer, " Feedback Format = %d.%d\n", - (ep->syncmaxsize > 3 ? 32 : 24) - res, res); + (sync_ep->syncmaxsize > 3 ? 32 : 24) - res, res); } } @@ -140,8 +141,7 @@ static void proc_dump_substream_status(struct snd_usb_substream *subs, struct sn snd_iprintf(buffer, " Status: Running\n"); snd_iprintf(buffer, " Interface = %d\n", subs->interface); snd_iprintf(buffer, " Altset = %d\n", subs->altset_idx); - proc_dump_ep_status(subs, subs->data_endpoint, buffer); - proc_dump_ep_status(subs, subs->sync_endpoint, buffer); + proc_dump_ep_status(subs, subs->data_endpoint, subs->sync_endpoint, buffer); } else { snd_iprintf(buffer, " Status: Stop\n"); } -- cgit v0.10.2 From 72822225bd41320a98f5d7cde38317766e18983f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Linus=20L=C3=BCssing?= Date: Mon, 15 Apr 2013 21:43:29 +0800 Subject: batman-adv: Fix rcu_barrier() miss due to double call_rcu() in TT code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit rcu_barrier() only waits for the currently scheduled rcu functions to finish - it won't wait for any function scheduled via another call_rcu() within an rcu scheduled function. Unfortunately our batadv_tt_orig_list_entry_free_ref() does just that, via a batadv_orig_node_free_ref() call, leading to our rcu_barrier() call potentially missing such a batadv_orig_node_free_ref(). This patch fixes this issue by calling the batadv_orig_node_free_rcu() directly from the rcu callback, removing the unnecessary, additional call_rcu() layer here. Signed-off-by: Linus Lüssing Signed-off-by: Marek Lindner Acked-by: Antonio Quartulli diff --git a/net/batman-adv/originator.c b/net/batman-adv/originator.c index 2f34525..fad1a20 100644 --- a/net/batman-adv/originator.c +++ b/net/batman-adv/originator.c @@ -156,12 +156,28 @@ static void batadv_orig_node_free_rcu(struct rcu_head *rcu) kfree(orig_node); } +/** + * batadv_orig_node_free_ref - decrement the orig node refcounter and possibly + * schedule an rcu callback for freeing it + * @orig_node: the orig node to free + */ void batadv_orig_node_free_ref(struct batadv_orig_node *orig_node) { if (atomic_dec_and_test(&orig_node->refcount)) call_rcu(&orig_node->rcu, batadv_orig_node_free_rcu); } +/** + * batadv_orig_node_free_ref_now - decrement the orig node refcounter and + * possibly free it (without rcu callback) + * @orig_node: the orig node to free + */ +void batadv_orig_node_free_ref_now(struct batadv_orig_node *orig_node) +{ + if (atomic_dec_and_test(&orig_node->refcount)) + batadv_orig_node_free_rcu(&orig_node->rcu); +} + void batadv_originator_free(struct batadv_priv *bat_priv) { struct batadv_hashtable *hash = bat_priv->orig_hash; diff --git a/net/batman-adv/originator.h b/net/batman-adv/originator.h index 7df48fa..734e5a3 100644 --- a/net/batman-adv/originator.h +++ b/net/batman-adv/originator.h @@ -26,6 +26,7 @@ int batadv_originator_init(struct batadv_priv *bat_priv); void batadv_originator_free(struct batadv_priv *bat_priv); void batadv_purge_orig_ref(struct batadv_priv *bat_priv); void batadv_orig_node_free_ref(struct batadv_orig_node *orig_node); +void batadv_orig_node_free_ref_now(struct batadv_orig_node *orig_node); struct batadv_orig_node *batadv_get_orig_node(struct batadv_priv *bat_priv, const uint8_t *addr); struct batadv_neigh_node * diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index 5e89dee..9e87485 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -144,7 +144,12 @@ static void batadv_tt_orig_list_entry_free_rcu(struct rcu_head *rcu) struct batadv_tt_orig_list_entry *orig_entry; orig_entry = container_of(rcu, struct batadv_tt_orig_list_entry, rcu); - batadv_orig_node_free_ref(orig_entry->orig_node); + + /* We are in an rcu callback here, therefore we cannot use + * batadv_orig_node_free_ref() and its call_rcu(): + * An rcu_barrier() wouldn't wait for that to finish + */ + batadv_orig_node_free_ref_now(orig_entry->orig_node); kfree(orig_entry); } -- cgit v0.10.2 From c60855cdb976c632b3bf8922eeab8a0e78edfc04 Mon Sep 17 00:00:00 2001 From: Aaron Lu Date: Fri, 17 May 2013 15:47:20 +0800 Subject: blkpm: avoid sleep when holding queue lock In blk_post_runtime_resume, an autosuspend request will be initiated for the device. Since we are holding the queue lock, we can't sleep and thus we should use the async version to initiate an autosuspend, i.e. pm_request_suspend instead of pm_runtime_suspend, which might sleep. Signed-off-by: Aaron Lu Signed-off-by: Jens Axboe diff --git a/block/blk-core.c b/block/blk-core.c index 33c33bc..d5745b5 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -3164,7 +3164,7 @@ void blk_post_runtime_resume(struct request_queue *q, int err) q->rpm_status = RPM_ACTIVE; __blk_run_queue(q); pm_runtime_mark_last_busy(q->dev); - pm_runtime_autosuspend(q->dev); + pm_request_autosuspend(q->dev); } else { q->rpm_status = RPM_SUSPENDED; } -- cgit v0.10.2 From e6f34cea56f5b95498070eaa9f4aa3ba4a9e4f62 Mon Sep 17 00:00:00 2001 From: Josef Ahmad Date: Fri, 19 Apr 2013 17:28:10 +0100 Subject: i2c: designware: fix RX FIFO overrun i2c_dw_xfer_msg() pushes a number of bytes to transmit/receive to/from the bus into the TX FIFO. For master-rx transactions, the maximum amount of data that can be received is calculated depending solely on TX and RX FIFO load. This is racy - TX FIFO may contain master-rx data yet to be processed, which will eventually land into the RX FIFO. This data is not taken into account and the function may request more data than the controller is actually capable of storing. This patch ensures the driver takes into account the outstanding master-rx data in TX FIFO to prevent RX FIFO overrun. Signed-off-by: Josef Ahmad Acked-by: Mika Westerberg Signed-off-by: Wolfram Sang Cc: stable@kernel.org diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index 21fbb34..1f06c8e 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -448,8 +448,14 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev) cmd |= BIT(9); if (msgs[dev->msg_write_idx].flags & I2C_M_RD) { + + /* avoid rx buffer overrun */ + if (rx_limit - dev->rx_outstanding <= 0) + break; + dw_writel(dev, cmd | 0x100, DW_IC_DATA_CMD); rx_limit--; + dev->rx_outstanding++; } else dw_writel(dev, cmd | *buf++, DW_IC_DATA_CMD); tx_limit--; buf_len--; @@ -502,8 +508,10 @@ i2c_dw_read(struct dw_i2c_dev *dev) rx_valid = dw_readl(dev, DW_IC_RXFLR); - for (; len > 0 && rx_valid > 0; len--, rx_valid--) + for (; len > 0 && rx_valid > 0; len--, rx_valid--) { *buf++ = dw_readl(dev, DW_IC_DATA_CMD); + dev->rx_outstanding--; + } if (len > 0) { dev->status |= STATUS_READ_IN_PROGRESS; @@ -561,6 +569,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) dev->msg_err = 0; dev->status = STATUS_IDLE; dev->abort_source = 0; + dev->rx_outstanding = 0; ret = i2c_dw_wait_bus_not_busy(dev); if (ret < 0) diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index 9c1840e..e761ad1 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -60,6 +60,7 @@ * @adapter: i2c subsystem adapter node * @tx_fifo_depth: depth of the hardware tx fifo * @rx_fifo_depth: depth of the hardware rx fifo + * @rx_outstanding: current master-rx elements in tx fifo */ struct dw_i2c_dev { struct device *dev; @@ -88,6 +89,7 @@ struct dw_i2c_dev { u32 master_cfg; unsigned int tx_fifo_depth; unsigned int rx_fifo_depth; + int rx_outstanding; }; #define ACCESS_SWAP 0x00000001 -- cgit v0.10.2 From 2a2d95e9d6d29e726cc294b65391917ed2e32bf4 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Mon, 13 May 2013 00:54:30 +0000 Subject: i2c: designware: always clear interrupts before enabling them If the I2C bus is put to a low power state by an ACPI method it might pull the SDA line low (as its power is removed). Once the bus is put to full power state again, the SDA line is pulled back to high. This transition looks like a STOP condition from the controller point-of-view which sets STOP detected bit in its status register causing the driver to fail subsequent transfers. Fix this by always clearing all interrupts before we start a transfer. Signed-off-by: Mika Westerberg Signed-off-by: Wolfram Sang Cc: stable@kernel.org diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index 1f06c8e..c41ca63 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -383,7 +383,8 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev) /* Enable the adapter */ __i2c_dw_enable(dev, true); - /* Enable interrupts */ + /* Clear and enable interrupts */ + i2c_dw_clear_int(dev); dw_writel(dev, DW_IC_INTR_DEFAULT_MASK, DW_IC_INTR_MASK); } -- cgit v0.10.2 From 06c9494c0e9bdfcaa14d6d2b096a0ff7abe8494f Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 15 May 2013 20:33:01 +0100 Subject: kmemleak: Scan all allocated, writeable and not executable module sections Instead of just picking data sections by name (names that start with .data, .bss or .ref.data), use the section flags and scan all sections that are allocated, writable and not executable. Which should cover all sections of a module that might reference data. Signed-off-by: Steven Rostedt [catalin.marinas@arm.com: removed unused 'name' variable] [catalin.marinas@arm.com: collapsed 'if' blocks] Signed-off-by: Catalin Marinas Acked-by: Rusty Russell diff --git a/kernel/module.c b/kernel/module.c index b049939..06f496a 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -2431,10 +2431,10 @@ static void kmemleak_load_module(const struct module *mod, kmemleak_scan_area(mod, sizeof(struct module), GFP_KERNEL); for (i = 1; i < info->hdr->e_shnum; i++) { - const char *name = info->secstrings + info->sechdrs[i].sh_name; - if (!(info->sechdrs[i].sh_flags & SHF_ALLOC)) - continue; - if (!strstarts(name, ".data") && !strstarts(name, ".bss")) + /* Scan all writable sections that's not executable */ + if (!(info->sechdrs[i].sh_flags & SHF_ALLOC) || + !(info->sechdrs[i].sh_flags & SHF_WRITE) || + (info->sechdrs[i].sh_flags & SHF_EXECINSTR)) continue; kmemleak_scan_area((void *)info->sechdrs[i].sh_addr, -- cgit v0.10.2 From 89c837351db0b9b52fd572ec8b0445a42e59b75c Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 15 May 2013 20:46:23 +0100 Subject: kmemleak: No need for scanning specific module sections As kmemleak now scans all module sections that are allocated, writable and non executable, there's no need to scan individual sections that might reference data. Signed-off-by: Steven Rostedt Signed-off-by: Catalin Marinas Acked-by: Rusty Russell diff --git a/kernel/module.c b/kernel/module.c index 06f496a..cab4bce 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -2769,24 +2769,11 @@ static void find_module_sections(struct module *mod, struct load_info *info) mod->trace_events = section_objs(info, "_ftrace_events", sizeof(*mod->trace_events), &mod->num_trace_events); - /* - * This section contains pointers to allocated objects in the trace - * code and not scanning it leads to false positives. - */ - kmemleak_scan_area(mod->trace_events, sizeof(*mod->trace_events) * - mod->num_trace_events, GFP_KERNEL); #endif #ifdef CONFIG_TRACING mod->trace_bprintk_fmt_start = section_objs(info, "__trace_printk_fmt", sizeof(*mod->trace_bprintk_fmt_start), &mod->num_trace_bprintk_fmt); - /* - * This section contains pointers to allocated objects in the trace - * code and not scanning it leads to false positives. - */ - kmemleak_scan_area(mod->trace_bprintk_fmt_start, - sizeof(*mod->trace_bprintk_fmt_start) * - mod->num_trace_bprintk_fmt, GFP_KERNEL); #endif #ifdef CONFIG_FTRACE_MCOUNT_RECORD /* sechdrs[0].sh_size is always zero */ -- cgit v0.10.2 From a4eeea4e530fee26918529eb1b36ae306095eef5 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Wed, 15 May 2013 16:53:07 +0200 Subject: s390/smp: fix cpu re-scan vs. cpu state The cpu-info array starts with a list of cpus in configured state, followed by the cpus in standby state. The comparison to decide which state a cpu has is incorrect, this causes configured cpus appear as standby cpus. The correct comparison is the index of the new cpu in the cpu-info array vs. the number of configured cpus. Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 8074cb4..05674b6 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -645,7 +645,7 @@ static int __cpuinit __smp_rescan_cpus(struct sclp_cpu_info *info, continue; pcpu = pcpu_devices + cpu; pcpu->address = info->cpu[i].address; - pcpu->state = (cpu >= info->configured) ? + pcpu->state = (i >= info->configured) ? CPU_STATE_STANDBY : CPU_STATE_CONFIGURED; smp_cpu_set_polarization(cpu, POLARIZATION_UNKNOWN); set_cpu_present(cpu, true); -- cgit v0.10.2 From 00e5d35c0ffcbc59d7126387a0ca74a3abe62f59 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Thu, 16 May 2013 15:27:13 +0200 Subject: s390/xpram: mark xpram as non-rotational xpram is a memory technology. Lets mark that as non-rotational. Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/block/xpram.c b/drivers/s390/block/xpram.c index 690c333..464dd29 100644 --- a/drivers/s390/block/xpram.c +++ b/drivers/s390/block/xpram.c @@ -343,6 +343,7 @@ static int __init xpram_setup_blkdev(void) put_disk(xpram_disks[i]); goto out; } + queue_flag_set_unlocked(QUEUE_FLAG_NONROT, xpram_queues[i]); blk_queue_make_request(xpram_queues[i], xpram_make_request); blk_queue_logical_block_size(xpram_queues[i], 4096); } -- cgit v0.10.2 From 6b8224e40af147d3300136ce6d037db48f89068f Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Thu, 16 May 2013 22:16:32 +0200 Subject: s390/pgtable: fix ipte notify bit Dont use the same bit as user referenced. Signed-off-by: Christian Borntraeger diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index 4105b82..0f0de30 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -306,7 +306,7 @@ extern unsigned long MODULES_END; #define RCP_HC_BIT 0x00200000UL #define RCP_GR_BIT 0x00040000UL #define RCP_GC_BIT 0x00020000UL -#define RCP_IN_BIT 0x00008000UL /* IPTE notify bit */ +#define RCP_IN_BIT 0x00002000UL /* IPTE notify bit */ /* User dirty / referenced bit for KVM's migration feature */ #define KVM_UR_BIT 0x00008000UL @@ -374,7 +374,7 @@ extern unsigned long MODULES_END; #define RCP_HC_BIT 0x0020000000000000UL #define RCP_GR_BIT 0x0004000000000000UL #define RCP_GC_BIT 0x0002000000000000UL -#define RCP_IN_BIT 0x0000800000000000UL /* IPTE notify bit */ +#define RCP_IN_BIT 0x0000200000000000UL /* IPTE notify bit */ /* User dirty / referenced bit for KVM's migration feature */ #define KVM_UR_BIT 0x0000800000000000UL -- cgit v0.10.2 From 6211dd12da609bc6893b9c3182630b494737ec4b Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Fri, 17 May 2013 13:43:04 +0200 Subject: mac80211: fix direct probe auth We send direct probe to broadcast address, as some APs do not respond to unicast PROBE frames when unassociated. Broadcast frames are not acked, so we can not use that for trigger MLME state machine, but we need to use old timeout mechanism. This fixes authentication timed out like below: [ 1024.671974] wlan6: authenticate with 54:e6:fc:98:63:fe [ 1024.694125] wlan6: direct probe to 54:e6:fc:98:63:fe (try 1/3) [ 1024.695450] wlan6: direct probe to 54:e6:fc:98:63:fe (try 2/3) [ 1024.700586] wlan6: send auth to 54:e6:fc:98:63:fe (try 3/3) [ 1024.701441] wlan6: authentication with 54:e6:fc:98:63:fe timed out With fix, we have: [ 4524.198978] wlan6: authenticate with 54:e6:fc:98:63:fe [ 4524.220692] wlan6: direct probe to 54:e6:fc:98:63:fe (try 1/3) [ 4524.421784] wlan6: send auth to 54:e6:fc:98:63:fe (try 2/3) [ 4524.423272] wlan6: authenticated [ 4524.423811] wlan6: associate with 54:e6:fc:98:63:fe (try 1/3) [ 4524.427492] wlan6: RX AssocResp from 54:e6:fc:98:63:fe (capab=0x431 status=0 aid=1) Cc: stable@vger.kernel.org # 3.9 Signed-off-by: Stanislaw Gruszka Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index a46e490..a8c2130 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3321,10 +3321,6 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata) if (WARN_ON_ONCE(!auth_data)) return -EINVAL; - if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) - tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS | - IEEE80211_TX_INTFL_MLME_CONN_TX; - auth_data->tries++; if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) { @@ -3358,6 +3354,10 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata) auth_data->expected_transaction = trans; } + if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) + tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS | + IEEE80211_TX_INTFL_MLME_CONN_TX; + ieee80211_send_auth(sdata, trans, auth_data->algorithm, status, auth_data->data, auth_data->data_len, auth_data->bss->bssid, @@ -3381,12 +3381,12 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata) * will not answer to direct packet in unassociated state. */ ieee80211_send_probe_req(sdata, NULL, ssidie + 2, ssidie[1], - NULL, 0, (u32) -1, true, tx_flags, + NULL, 0, (u32) -1, true, 0, auth_data->bss->channel, false); rcu_read_unlock(); } - if (!(local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)) { + if (tx_flags == 0) { auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT; ifmgd->auth_data->timeout_started = true; run_again(ifmgd, auth_data->timeout); -- cgit v0.10.2 From dfbe403c5bc859620a2823ec1753369ac11a8bf6 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 17 May 2013 13:12:52 +0100 Subject: spi: Move mailing list to vger Given the spam and other problems with the existing list move to a newly created list on vger. Signed-off-by: Mark Brown diff --git a/MAINTAINERS b/MAINTAINERS index 3d7782b..d45a7d1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7589,7 +7589,7 @@ F: drivers/clk/spear/ SPI SUBSYSTEM M: Mark Brown M: Grant Likely -L: spi-devel-general@lists.sourceforge.net +L: linux-spi@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git Q: http://patchwork.kernel.org/project/spi-devel-general/list/ S: Maintained -- cgit v0.10.2 From 76e0310c2d5a4fb62f674af7dad16f544950fc13 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 14 May 2013 08:32:13 +0530 Subject: NVMe: Remove redundant version.h header include version.h header inclusion is not necessary as detected by checkversion.pl. Signed-off-by: Sachin Kamat Acked-by: Vishal Verma Signed-off-by: Matthew Wilcox diff --git a/drivers/block/nvme-scsi.c b/drivers/block/nvme-scsi.c index fed54b0..64bde68 100644 --- a/drivers/block/nvme-scsi.c +++ b/drivers/block/nvme-scsi.c @@ -44,7 +44,6 @@ #include #include #include -#include #include #include -- cgit v0.10.2 From 710a143dd870cd660b5ae26bb94b6da854376e91 Mon Sep 17 00:00:00 2001 From: Vishal Verma Date: Mon, 13 May 2013 14:55:18 -0600 Subject: NVMe: Fix a signedness bug in nvme_trans_modesel_get_mp nvme_trans_modesel_get_mp() was defined with a unsigned return type, but can return signed values. Reported-by: Dan Carpenter Signed-off-by: Vishal Verma Signed-off-by: Matthew Wilcox diff --git a/drivers/block/nvme-scsi.c b/drivers/block/nvme-scsi.c index 64bde68..102de2f 100644 --- a/drivers/block/nvme-scsi.c +++ b/drivers/block/nvme-scsi.c @@ -1653,7 +1653,7 @@ static void nvme_trans_modesel_save_bd(struct nvme_ns *ns, u8 *parm_list, } } -static u16 nvme_trans_modesel_get_mp(struct nvme_ns *ns, struct sg_io_hdr *hdr, +static int nvme_trans_modesel_get_mp(struct nvme_ns *ns, struct sg_io_hdr *hdr, u8 *mode_page, u8 page_code) { int res = SNTI_TRANSLATION_SUCCESS; -- cgit v0.10.2 From 5be37bf9c17ffad0590a4044dbb110fe08066923 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 13 May 2013 18:00:42 +0300 Subject: MAINTAINERS: update NVM EXPRESS DRIVER file list There isn't an nvme.c file any more. It has been split into multiple files. Signed-off-by: Dan Carpenter Signed-off-by: Matthew Wilcox diff --git a/MAINTAINERS b/MAINTAINERS index 3a7b07f..748a96d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5740,7 +5740,7 @@ M: Matthew Wilcox L: linux-nvme@lists.infradead.org T: git git://git.infradead.org/users/willy/linux-nvme.git S: Supported -F: drivers/block/nvme.c +F: drivers/block/nvme* F: include/linux/nvme.h OMAP SUPPORT -- cgit v0.10.2 From 5460fc03105fbed01fe27aa572d9f65bb410a61d Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 13 May 2013 17:59:50 +0300 Subject: NVMe: check for integer overflow in nvme_map_user_pages() You need to have CAP_SYS_ADMIN to trigger this overflow but it makes the static checkers complain so we should fix it. The worry is that "length" comes from copy_from_user() so we need to check that "length + offset" can't overflow. I also changed the min_t() cast to be unsigned instead of signed. Now that we cap "length" to INT_MAX it doesn't make a difference, but it's a little easier for reviewers to know that large values aren't cast to negative. Signed-off-by: Dan Carpenter Signed-off-by: Matthew Wilcox diff --git a/drivers/block/nvme-core.c b/drivers/block/nvme-core.c index 8efdfaa..4376375 100644 --- a/drivers/block/nvme-core.c +++ b/drivers/block/nvme-core.c @@ -1206,7 +1206,7 @@ struct nvme_iod *nvme_map_user_pages(struct nvme_dev *dev, int write, if (addr & 3) return ERR_PTR(-EINVAL); - if (!length) + if (!length || length > INT_MAX - PAGE_SIZE) return ERR_PTR(-EINVAL); offset = offset_in_page(addr); @@ -1227,7 +1227,8 @@ struct nvme_iod *nvme_map_user_pages(struct nvme_dev *dev, int write, sg_init_table(sg, count); for (i = 0; i < count; i++) { sg_set_page(&sg[i], pages[i], - min_t(int, length, PAGE_SIZE - offset), offset); + min_t(unsigned, length, PAGE_SIZE - offset), + offset); length -= (PAGE_SIZE - offset); offset = 0; } -- cgit v0.10.2 From 1287dabd345f447bbe0f7a99fc95ab89bcfc0f5d Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 13 May 2013 22:29:04 +0800 Subject: NVMe: fix error return code in nvme_submit_bio_queue() nvme_submit_flush_data() might overwrite the initialisation of the return value with 0, so move the -ENOMEM setting close to the usage. Signed-off-by: Wei Yongjun Signed-off-by: Matthew Wilcox diff --git a/drivers/block/nvme-core.c b/drivers/block/nvme-core.c index 4376375..d783f15 100644 --- a/drivers/block/nvme-core.c +++ b/drivers/block/nvme-core.c @@ -629,7 +629,7 @@ static int nvme_submit_bio_queue(struct nvme_queue *nvmeq, struct nvme_ns *ns, struct nvme_command *cmnd; struct nvme_iod *iod; enum dma_data_direction dma_dir; - int cmdid, length, result = -ENOMEM; + int cmdid, length, result; u16 control; u32 dsmgmt; int psegs = bio_phys_segments(ns->queue, bio); @@ -640,6 +640,7 @@ static int nvme_submit_bio_queue(struct nvme_queue *nvmeq, struct nvme_ns *ns, return result; } + result = -ENOMEM; iod = nvme_alloc_iod(psegs, bio->bi_size, GFP_ATOMIC); if (!iod) goto nomem; -- cgit v0.10.2 From 1fbeeba35e1a25f1a7598e0f5d1433c18084e96a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 17 May 2013 15:08:41 +0200 Subject: block: remove refs to XD disks from documentation Commit d1a6f4f19728d6e90480e53601a90fc9f6a348ad "block: delete super ancient PC-XT driver for 1980's hardware" deleted the XD disk driver, but there are still a few references to it in the documentation directory. Delete the remnants and thus also free up the major block device 13 for reuse. Cc: Paul Gortmaker Cc: Jens Axboe Signed-off-by: Linus Walleij Signed-off-by: Jens Axboe diff --git a/Documentation/devices.txt b/Documentation/devices.txt index 08f01e7..b901591 100644 --- a/Documentation/devices.txt +++ b/Documentation/devices.txt @@ -498,12 +498,8 @@ Your cooperation is appreciated. Each device type has 5 bits (32 minors). - 13 block 8-bit MFM/RLL/IDE controller - 0 = /dev/xda First XT disk whole disk - 64 = /dev/xdb Second XT disk whole disk - - Partitions are handled in the same way as IDE disks - (see major number 3). + 13 block Previously used for the XT disk (/dev/xdN) + Deleted in kernel v3.9. 14 char Open Sound System (OSS) 0 = /dev/mixer Mixer control diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index c3bfacb..5469dbf 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -3330,9 +3330,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted. plus one apbt timer for broadcast timer. x86_mrst_timer=apbt_only | lapic_and_apbt - xd= [HW,XT] Original XT pre-IDE (RLL encoded) disks. - xd_geo= See header of drivers/block/xd.c. - xen_emul_unplug= [HW,X86,XEN] Unplug Xen emulated devices Format: [unplug0,][unplug1] diff --git a/Documentation/m68k/kernel-options.txt b/Documentation/m68k/kernel-options.txt index 97d45f2..eaf32a1 100644 --- a/Documentation/m68k/kernel-options.txt +++ b/Documentation/m68k/kernel-options.txt @@ -80,8 +80,6 @@ Valid names are: /dev/sdd: -> 0x0830 (forth SCSI disk) /dev/sde: -> 0x0840 (fifth SCSI disk) /dev/fd : -> 0x0200 (floppy disk) - /dev/xda: -> 0x0c00 (first XT disk, unused in Linux/m68k) - /dev/xdb: -> 0x0c40 (second XT disk, unused in Linux/m68k) The name must be followed by a decimal number, that stands for the partition number. Internally, the value of the number is just -- cgit v0.10.2 From 053ab702cc2702f25a97ead087ed344b864785b7 Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Tue, 30 Apr 2013 11:19:38 -0600 Subject: NVMe: Do not cancel command multiple times Cancelling an already cancelled command does not do anything, so check the command context before cancelling it, continuing if had already been cancelled so we do not log the same problem every second if a device stops responding. Signed-off-by: Keith Busch Signed-off-by: Matthew Wilcox diff --git a/drivers/block/nvme-core.c b/drivers/block/nvme-core.c index d783f15..42abf72 100644 --- a/drivers/block/nvme-core.c +++ b/drivers/block/nvme-core.c @@ -978,6 +978,8 @@ static void nvme_cancel_ios(struct nvme_queue *nvmeq, bool timeout) if (timeout && !time_after(now, info[cmdid].timeout)) continue; + if (info[cmdid].ctx == CMD_CTX_CANCELLED) + continue; dev_warn(nvmeq->q_dmadev, "Cancelling I/O %d\n", cmdid); ctx = cancel_cmdid(nvmeq, cmdid, &fn); fn(nvmeq->dev, ctx, &cqe); -- cgit v0.10.2 From c6c003af0b91bb8722dbf2a8683cd40532e12079 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Fri, 17 May 2013 08:09:57 -0300 Subject: ARM: mvebu: Fix ranges entry on XP GP board With the latest device tree reorganization which introduced the 'internal-reg' node, now the only region translated is the internal register's. This makes the description of the hardware incomplete, for it lacks the Device Bus childs address space. In order to fix this, it's required to add a 'ranges' entry with a suitable address space to map Device Bus childs, on a per-board basis. This patch fixes the ranges property on the Armada XP GP board. Signed-off-by: Ezequiel Garcia Signed-off-by: Jason Cooper diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 26ad06f..3ee63d1 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -39,6 +39,9 @@ }; soc { + ranges = <0 0 0xd0000000 0x100000 + 0xf0000000 0 0xf0000000 0x1000000>; + internal-regs { serial@12000 { clock-frequency = <250000000>; -- cgit v0.10.2 From a6d25f4c951b8b28f2eaec6f891ff834622532f2 Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Wed, 27 Mar 2013 15:34:26 +0530 Subject: ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock It is required to enable respective clock-domain before enabling any clock/module inside that clock-domain. During common-clock migration, .clkdm_name field got missed for "clkdiv32k_ick" clock, which leaves "clk_24mhz_clkdm" unused; so it will be disabled even if childs of this clock-domain is enabled, which keeps child modules in idle mode. This fixes the kernel crash observed on AM335xEVM-SK platform, where clkdiv32_ick clock is being used as a gpio debounce clock and since clkdiv32k_ick is in idle mode it leads to below crash - Crash Log: ========== [ 2.598347] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa1ac150 [ 2.606434] Internal error: : 1028 [#1] SMP ARM [ 2.611207] Modules linked in: [ 2.614449] CPU: 0 Not tainted (3.8.4-01382-g1f449cd-dirty #4) [ 2.620973] PC is at _set_gpio_debounce+0x60/0x104 [ 2.626025] LR is at clk_enable+0x30/0x3c Cc: stable@vger.kernel.org # v3.9 Signed-off-by: Vaibhav Hiremath Cc: Rajendra Nayak Acked-by: Paul Walmsley Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/cclock33xx_data.c b/arch/arm/mach-omap2/cclock33xx_data.c index 6ebc780..af3544c 100644 --- a/arch/arm/mach-omap2/cclock33xx_data.c +++ b/arch/arm/mach-omap2/cclock33xx_data.c @@ -454,9 +454,29 @@ DEFINE_CLK_GATE(cefuse_fck, "sys_clkin_ck", &sys_clkin_ck, 0x0, */ DEFINE_CLK_FIXED_FACTOR(clkdiv32k_ck, "clk_24mhz", &clk_24mhz, 0x0, 1, 732); -DEFINE_CLK_GATE(clkdiv32k_ick, "clkdiv32k_ck", &clkdiv32k_ck, 0x0, - AM33XX_CM_PER_CLKDIV32K_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT, - 0x0, NULL); +static struct clk clkdiv32k_ick; + +static const char *clkdiv32k_ick_parent_names[] = { + "clkdiv32k_ck", +}; + +static const struct clk_ops clkdiv32k_ick_ops = { + .enable = &omap2_dflt_clk_enable, + .disable = &omap2_dflt_clk_disable, + .is_enabled = &omap2_dflt_clk_is_enabled, + .init = &omap2_init_clk_clkdm, +}; + +static struct clk_hw_omap clkdiv32k_ick_hw = { + .hw = { + .clk = &clkdiv32k_ick, + }, + .enable_reg = AM33XX_CM_PER_CLKDIV32K_CLKCTRL, + .enable_bit = AM33XX_MODULEMODE_SWCTRL_SHIFT, + .clkdm_name = "clk_24mhz_clkdm", +}; + +DEFINE_STRUCT_CLK(clkdiv32k_ick, clkdiv32k_ick_parent_names, clkdiv32k_ick_ops); /* "usbotg_fck" is an additional clock and not really a modulemode */ DEFINE_CLK_GATE(usbotg_fck, "dpll_per_ck", &dpll_per_ck, 0x0, -- cgit v0.10.2 From 3126976be64bfb4c87297cb022ca815212079aec Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 17 May 2013 17:41:22 +0100 Subject: arm64: debug: fix mdscr.ss check when enabling debug exceptions When we take an exception at EL1, we only want to enable debug exceptions if we're not currently stepping, otherwise we can easily get stuck in a loop stepping into interrupt handlers. Unfortunately, the current code tests the wrong bit in the mdscr, so fix that. Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h index c8eedc6..5aceb83 100644 --- a/arch/arm64/include/asm/assembler.h +++ b/arch/arm64/include/asm/assembler.h @@ -82,7 +82,7 @@ .macro enable_dbg_if_not_stepping, tmp mrs \tmp, mdscr_el1 - tbnz \tmp, #1, 9990f + tbnz \tmp, #0, 9990f enable_dbg 9990: .endm -- cgit v0.10.2 From 14d2f38df67fadee34625fcbd282ee22514c4846 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Wed, 15 May 2013 16:28:33 -0500 Subject: libceph: must hold mutex for reset_changed_osds() An osd client has a red-black tree describing its osds, and occasionally we would get crashes due to one of these trees tree becoming corrupt somehow. The problem turned out to be that reset_changed_osds() was being called without protection of the osd client request mutex. That function would call __reset_osd() for any osd that had changed, and __reset_osd() would call __remove_osd() for any osd with no outstanding requests, and finally __remove_osd() would remove the corresponding entry from the red-black tree. Thus, the tree was getting modified without having any lock protection, and was vulnerable to problems due to concurrent updates. This appears to be the only osd tree updating path that has this problem. It can be fairly easily fixed by moving the call up a few lines, to just before the request mutex gets dropped in kick_requests(). This resolves: http://tracker.ceph.com/issues/5043 Cc: stable@vger.kernel.org # 3.4+ Signed-off-by: Alex Elder Reviewed-by: Sage Weil diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c index d5953b8..3a246a6 100644 --- a/net/ceph/osd_client.c +++ b/net/ceph/osd_client.c @@ -1675,13 +1675,13 @@ static void kick_requests(struct ceph_osd_client *osdc, int force_resend) __register_request(osdc, req); __unregister_linger_request(osdc, req); } + reset_changed_osds(osdc); mutex_unlock(&osdc->request_mutex); if (needmap) { dout("%d requests for down osds, need new map\n", needmap); ceph_monc_request_next_osdmap(&osdc->client->monc); } - reset_changed_osds(osdc); } -- cgit v0.10.2 From c420276a532a10ef59849adc2681f45306166b89 Mon Sep 17 00:00:00 2001 From: Jim Schutt Date: Wed, 15 May 2013 13:03:35 -0500 Subject: ceph: add cpu_to_le32() calls when encoding a reconnect capability In his review, Alex Elder mentioned that he hadn't checked that num_fcntl_locks and num_flock_locks were properly decoded on the server side, from a le32 over-the-wire type to a cpu type. I checked, and AFAICS it is done; those interested can consult Locker::_do_cap_update() in src/mds/Locker.cc and src/include/encoding.h in the Ceph server code (git://github.com/ceph/ceph). I also checked the server side for flock_len decoding, and I believe that also happens correctly, by virtue of having been declared __le32 in struct ceph_mds_cap_reconnect, in src/include/ceph_fs.h. Cc: stable@vger.kernel.org # 3.4+ Signed-off-by: Jim Schutt Reviewed-by: Alex Elder diff --git a/fs/ceph/locks.c b/fs/ceph/locks.c index 202dd3d..a80ed18 100644 --- a/fs/ceph/locks.c +++ b/fs/ceph/locks.c @@ -206,10 +206,12 @@ int ceph_encode_locks(struct inode *inode, struct ceph_pagelist *pagelist, int err = 0; int seen_fcntl = 0; int seen_flock = 0; + __le32 nlocks; dout("encoding %d flock and %d fcntl locks", num_flock_locks, num_fcntl_locks); - err = ceph_pagelist_append(pagelist, &num_fcntl_locks, sizeof(u32)); + nlocks = cpu_to_le32(num_fcntl_locks); + err = ceph_pagelist_append(pagelist, &nlocks, sizeof(nlocks)); if (err) goto fail; for (lock = inode->i_flock; lock != NULL; lock = lock->fl_next) { @@ -229,7 +231,8 @@ int ceph_encode_locks(struct inode *inode, struct ceph_pagelist *pagelist, goto fail; } - err = ceph_pagelist_append(pagelist, &num_flock_locks, sizeof(u32)); + nlocks = cpu_to_le32(num_flock_locks); + err = ceph_pagelist_append(pagelist, &nlocks, sizeof(nlocks)); if (err) goto fail; for (lock = inode->i_flock; lock != NULL; lock = lock->fl_next) { diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c index 4f22671..d9ca152 100644 --- a/fs/ceph/mds_client.c +++ b/fs/ceph/mds_client.c @@ -2485,7 +2485,7 @@ static int encode_caps_cb(struct inode *inode, struct ceph_cap *cap, lock_flocks(); ceph_count_locks(inode, &num_fcntl_locks, &num_flock_locks); - rec.v2.flock_len = (2*sizeof(u32) + + rec.v2.flock_len = cpu_to_le32(2*sizeof(u32) + (num_fcntl_locks+num_flock_locks) * sizeof(struct ceph_filelock)); unlock_flocks(); -- cgit v0.10.2 From 39be95e9c8c0b5668c9f8806ffe29bf9f4bc0f40 Mon Sep 17 00:00:00 2001 From: Jim Schutt Date: Wed, 15 May 2013 13:03:35 -0500 Subject: ceph: ceph_pagelist_append might sleep while atomic Ceph's encode_caps_cb() worked hard to not call __page_cache_alloc() while holding a lock, but it's spoiled because ceph_pagelist_addpage() always calls kmap(), which might sleep. Here's the result: [13439.295457] ceph: mds0 reconnect start [13439.300572] BUG: sleeping function called from invalid context at include/linux/highmem.h:58 [13439.309243] in_atomic(): 1, irqs_disabled(): 0, pid: 12059, name: kworker/1:1 . . . [13439.376225] Call Trace: [13439.378757] [] __might_sleep+0xfc/0x110 [13439.384353] [] ceph_pagelist_append+0x120/0x1b0 [libceph] [13439.391491] [] ceph_encode_locks+0x89/0x190 [ceph] [13439.398035] [] ? _raw_spin_lock+0x49/0x50 [13439.403775] [] ? lock_flocks+0x15/0x20 [13439.409277] [] encode_caps_cb+0x41f/0x4a0 [ceph] [13439.415622] [] ? igrab+0x28/0x70 [13439.420610] [] ? iterate_session_caps+0xe8/0x250 [ceph] [13439.427584] [] iterate_session_caps+0x115/0x250 [ceph] [13439.434499] [] ? set_request_path_attr+0x2d0/0x2d0 [ceph] [13439.441646] [] send_mds_reconnect+0x238/0x450 [ceph] [13439.448363] [] ? ceph_mdsmap_decode+0x5e2/0x770 [ceph] [13439.455250] [] check_new_map+0x352/0x500 [ceph] [13439.461534] [] ceph_mdsc_handle_map+0x1bd/0x260 [ceph] [13439.468432] [] ? mutex_unlock+0xe/0x10 [13439.473934] [] extra_mon_dispatch+0x22/0x30 [ceph] [13439.480464] [] dispatch+0xbc/0x110 [libceph] [13439.486492] [] process_message+0x1ad/0x1d0 [libceph] [13439.493190] [] ? read_partial_message+0x3e8/0x520 [libceph] . . . [13439.587132] ceph: mds0 reconnect success [13490.720032] ceph: mds0 caps stale [13501.235257] ceph: mds0 recovery completed [13501.300419] ceph: mds0 caps renewed Fix it up by encoding locks into a buffer first, and when the number of encoded locks is stable, copy that into a ceph_pagelist. [elder@inktank.com: abbreviated the stack info a bit.] Cc: stable@vger.kernel.org # 3.4+ Signed-off-by: Jim Schutt Reviewed-by: Alex Elder diff --git a/fs/ceph/locks.c b/fs/ceph/locks.c index a80ed18..ebbf680 100644 --- a/fs/ceph/locks.c +++ b/fs/ceph/locks.c @@ -191,29 +191,23 @@ void ceph_count_locks(struct inode *inode, int *fcntl_count, int *flock_count) } /** - * Encode the flock and fcntl locks for the given inode into the pagelist. - * Format is: #fcntl locks, sequential fcntl locks, #flock locks, - * sequential flock locks. - * Must be called with lock_flocks() already held. - * If we encounter more of a specific lock type than expected, - * we return the value 1. + * Encode the flock and fcntl locks for the given inode into the ceph_filelock + * array. Must be called with lock_flocks() already held. + * If we encounter more of a specific lock type than expected, return -ENOSPC. */ -int ceph_encode_locks(struct inode *inode, struct ceph_pagelist *pagelist, - int num_fcntl_locks, int num_flock_locks) +int ceph_encode_locks_to_buffer(struct inode *inode, + struct ceph_filelock *flocks, + int num_fcntl_locks, int num_flock_locks) { struct file_lock *lock; - struct ceph_filelock cephlock; int err = 0; int seen_fcntl = 0; int seen_flock = 0; - __le32 nlocks; + int l = 0; dout("encoding %d flock and %d fcntl locks", num_flock_locks, num_fcntl_locks); - nlocks = cpu_to_le32(num_fcntl_locks); - err = ceph_pagelist_append(pagelist, &nlocks, sizeof(nlocks)); - if (err) - goto fail; + for (lock = inode->i_flock; lock != NULL; lock = lock->fl_next) { if (lock->fl_flags & FL_POSIX) { ++seen_fcntl; @@ -221,20 +215,12 @@ int ceph_encode_locks(struct inode *inode, struct ceph_pagelist *pagelist, err = -ENOSPC; goto fail; } - err = lock_to_ceph_filelock(lock, &cephlock); + err = lock_to_ceph_filelock(lock, &flocks[l]); if (err) goto fail; - err = ceph_pagelist_append(pagelist, &cephlock, - sizeof(struct ceph_filelock)); + ++l; } - if (err) - goto fail; } - - nlocks = cpu_to_le32(num_flock_locks); - err = ceph_pagelist_append(pagelist, &nlocks, sizeof(nlocks)); - if (err) - goto fail; for (lock = inode->i_flock; lock != NULL; lock = lock->fl_next) { if (lock->fl_flags & FL_FLOCK) { ++seen_flock; @@ -242,19 +228,51 @@ int ceph_encode_locks(struct inode *inode, struct ceph_pagelist *pagelist, err = -ENOSPC; goto fail; } - err = lock_to_ceph_filelock(lock, &cephlock); + err = lock_to_ceph_filelock(lock, &flocks[l]); if (err) goto fail; - err = ceph_pagelist_append(pagelist, &cephlock, - sizeof(struct ceph_filelock)); + ++l; } - if (err) - goto fail; } fail: return err; } +/** + * Copy the encoded flock and fcntl locks into the pagelist. + * Format is: #fcntl locks, sequential fcntl locks, #flock locks, + * sequential flock locks. + * Returns zero on success. + */ +int ceph_locks_to_pagelist(struct ceph_filelock *flocks, + struct ceph_pagelist *pagelist, + int num_fcntl_locks, int num_flock_locks) +{ + int err = 0; + __le32 nlocks; + + nlocks = cpu_to_le32(num_fcntl_locks); + err = ceph_pagelist_append(pagelist, &nlocks, sizeof(nlocks)); + if (err) + goto out_fail; + + err = ceph_pagelist_append(pagelist, flocks, + num_fcntl_locks * sizeof(*flocks)); + if (err) + goto out_fail; + + nlocks = cpu_to_le32(num_flock_locks); + err = ceph_pagelist_append(pagelist, &nlocks, sizeof(nlocks)); + if (err) + goto out_fail; + + err = ceph_pagelist_append(pagelist, + &flocks[num_fcntl_locks], + num_flock_locks * sizeof(*flocks)); +out_fail: + return err; +} + /* * Given a pointer to a lock, convert it to a ceph filelock */ diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c index d9ca152..4d29203 100644 --- a/fs/ceph/mds_client.c +++ b/fs/ceph/mds_client.c @@ -2478,39 +2478,44 @@ static int encode_caps_cb(struct inode *inode, struct ceph_cap *cap, if (recon_state->flock) { int num_fcntl_locks, num_flock_locks; - struct ceph_pagelist_cursor trunc_point; - - ceph_pagelist_set_cursor(pagelist, &trunc_point); - do { - lock_flocks(); - ceph_count_locks(inode, &num_fcntl_locks, - &num_flock_locks); - rec.v2.flock_len = cpu_to_le32(2*sizeof(u32) + - (num_fcntl_locks+num_flock_locks) * - sizeof(struct ceph_filelock)); - unlock_flocks(); - - /* pre-alloc pagelist */ - ceph_pagelist_truncate(pagelist, &trunc_point); - err = ceph_pagelist_append(pagelist, &rec, reclen); - if (!err) - err = ceph_pagelist_reserve(pagelist, - rec.v2.flock_len); - - /* encode locks */ - if (!err) { - lock_flocks(); - err = ceph_encode_locks(inode, - pagelist, - num_fcntl_locks, - num_flock_locks); - unlock_flocks(); - } - } while (err == -ENOSPC); + struct ceph_filelock *flocks; + +encode_again: + lock_flocks(); + ceph_count_locks(inode, &num_fcntl_locks, &num_flock_locks); + unlock_flocks(); + flocks = kmalloc((num_fcntl_locks+num_flock_locks) * + sizeof(struct ceph_filelock), GFP_NOFS); + if (!flocks) { + err = -ENOMEM; + goto out_free; + } + lock_flocks(); + err = ceph_encode_locks_to_buffer(inode, flocks, + num_fcntl_locks, + num_flock_locks); + unlock_flocks(); + if (err) { + kfree(flocks); + if (err == -ENOSPC) + goto encode_again; + goto out_free; + } + /* + * number of encoded locks is stable, so copy to pagelist + */ + rec.v2.flock_len = cpu_to_le32(2*sizeof(u32) + + (num_fcntl_locks+num_flock_locks) * + sizeof(struct ceph_filelock)); + err = ceph_pagelist_append(pagelist, &rec, reclen); + if (!err) + err = ceph_locks_to_pagelist(flocks, pagelist, + num_fcntl_locks, + num_flock_locks); + kfree(flocks); } else { err = ceph_pagelist_append(pagelist, &rec, reclen); } - out_free: kfree(path); out_dput: diff --git a/fs/ceph/super.h b/fs/ceph/super.h index 8696be2..7ccfdb4 100644 --- a/fs/ceph/super.h +++ b/fs/ceph/super.h @@ -822,8 +822,13 @@ extern const struct export_operations ceph_export_ops; extern int ceph_lock(struct file *file, int cmd, struct file_lock *fl); extern int ceph_flock(struct file *file, int cmd, struct file_lock *fl); extern void ceph_count_locks(struct inode *inode, int *p_num, int *f_num); -extern int ceph_encode_locks(struct inode *i, struct ceph_pagelist *p, - int p_locks, int f_locks); +extern int ceph_encode_locks_to_buffer(struct inode *inode, + struct ceph_filelock *flocks, + int num_fcntl_locks, + int num_flock_locks); +extern int ceph_locks_to_pagelist(struct ceph_filelock *flocks, + struct ceph_pagelist *pagelist, + int num_fcntl_locks, int num_flock_locks); extern int lock_to_ceph_filelock(struct file_lock *fl, struct ceph_filelock *c); /* debugfs.c */ -- cgit v0.10.2 From 7262cfca430a1a0e0707149af29ae86bc0ded230 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Thu, 16 May 2013 15:04:20 -0500 Subject: rbd: don't destroy ceph_opts in rbd_add() Whether rbd_client_create() successfully creates a new client or not, it takes responsibility for getting the ceph_opts structure it's passed destroyed. If successful, the structure becomes associated with the created client; if not, rbd_client_create() will destroy it. Previously, rbd_get_client() would call ceph_destroy_options() if rbd_get_client() failed, and that meant it got called twice. That led freeing various pointers more than once, which is never a good idea. This resolves: http://tracker.ceph.com/issues/4559 Cc: stable@vger.kernel.org # 3.8+ Reported-by: Dan van der Ster Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 6b872f2..5f64ba7 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -521,8 +521,8 @@ static const struct block_device_operations rbd_bd_ops = { }; /* - * Initialize an rbd client instance. - * We own *ceph_opts. + * Initialize an rbd client instance. Success or not, this function + * consumes ceph_opts. */ static struct rbd_client *rbd_client_create(struct ceph_options *ceph_opts) { @@ -677,7 +677,8 @@ static int parse_rbd_opts_token(char *c, void *private) /* * Get a ceph client with specific addr and configuration, if one does - * not exist create it. + * not exist create it. Either way, ceph_opts is consumed by this + * function. */ static struct rbd_client *rbd_get_client(struct ceph_options *ceph_opts) { @@ -4994,7 +4995,6 @@ static ssize_t rbd_add(struct bus_type *bus, rc = PTR_ERR(rbdc); goto err_out_args; } - ceph_opts = NULL; /* rbd_dev client now owns this */ /* pick the pool */ osdc = &rbdc->client->osdc; @@ -5038,8 +5038,6 @@ err_out_rbd_dev: err_out_client: rbd_put_client(rbdc); err_out_args: - if (ceph_opts) - ceph_destroy_options(ceph_opts); kfree(rbd_opts); rbd_spec_put(spec); err_out_module: -- cgit v0.10.2 From 3abef3b3585bbc67d56fdc9c67761a900fb4b69d Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 13 May 2013 20:35:37 -0500 Subject: rbd: fix cleanup in rbd_add() Bjorn Helgaas pointed out that a recent commit introduced a use-after-free condition in an error path for rbd_add(). He correctly stated: I think b536f69a3a5 "rbd: set up devices only for mapped images" introduced a use-after-free error in rbd_add(): ... If rbd_dev_device_setup() returns an error, we call rbd_dev_image_release(), which ultimately kfrees rbd_dev. Then we call rbd_dev_destroy(), which references fields in the already-freed rbd_dev struct before kfreeing it again. The simple fix is to return the error code after the call to rbd_dev_image_release(). Closer examination revealed that there's no need to clean up rbd_opts in that function, so fix that too. Update some other comments that have also become out of date. Reported-by: Bjorn Helgaas Signed-off-by: Alex Elder Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 5f64ba7..3a897a5 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -4700,8 +4700,10 @@ out: return ret; } -/* Undo whatever state changes are made by v1 or v2 image probe */ - +/* + * Undo whatever state changes are made by v1 or v2 header info + * call. + */ static void rbd_dev_unprobe(struct rbd_device *rbd_dev) { struct rbd_image_header *header; @@ -4905,9 +4907,10 @@ static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool mapping) int tmp; /* - * Get the id from the image id object. If it's not a - * format 2 image, we'll get ENOENT back, and we'll assume - * it's a format 1 image. + * Get the id from the image id object. Unless there's an + * error, rbd_dev->spec->image_id will be filled in with + * a dynamically-allocated string, and rbd_dev->image_format + * will be set to either 1 or 2. */ ret = rbd_dev_image_id(rbd_dev); if (ret) @@ -5029,16 +5032,18 @@ static ssize_t rbd_add(struct bus_type *bus, rbd_dev->mapping.read_only = read_only; rc = rbd_dev_device_setup(rbd_dev); - if (!rc) - return count; + if (rc) { + rbd_dev_image_release(rbd_dev); + goto err_out_module; + } + + return count; - rbd_dev_image_release(rbd_dev); err_out_rbd_dev: rbd_dev_destroy(rbd_dev); err_out_client: rbd_put_client(rbdc); err_out_args: - kfree(rbd_opts); rbd_spec_put(spec); err_out_module: module_put(THIS_MODULE); -- cgit v0.10.2 From becdbc592580f76df58fdae14544f5db36ae05b4 Mon Sep 17 00:00:00 2001 From: Denis Efremov Date: Thu, 9 May 2013 13:19:39 +0400 Subject: iwlegacy: remove inline marking of EXPORT_SYMBOL functions EXPORT_SYMBOL and inline directives are contradictory to each other. The patch fixes this inconsistency. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Denis Efremov Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlegacy/common.c b/drivers/net/wireless/iwlegacy/common.c index 592d0aa..e9a3cbc 100644 --- a/drivers/net/wireless/iwlegacy/common.c +++ b/drivers/net/wireless/iwlegacy/common.c @@ -1423,7 +1423,7 @@ il_setup_rx_scan_handlers(struct il_priv *il) } EXPORT_SYMBOL(il_setup_rx_scan_handlers); -inline u16 +u16 il_get_active_dwell_time(struct il_priv *il, enum ieee80211_band band, u8 n_probes) { -- cgit v0.10.2 From d4988d4c733ba0b61cb372edd3d1992d26dd10d3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Thu, 9 May 2013 21:24:24 +0200 Subject: bcma: add more core IDs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit PCIe and ARM CR4 cores were found on 14e4:43b1 AKA BCM4352. Reported-by: Gabriel Thörnblad Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville diff --git a/drivers/bcma/scan.c b/drivers/bcma/scan.c index bca9c80..8bffa5c 100644 --- a/drivers/bcma/scan.c +++ b/drivers/bcma/scan.c @@ -84,6 +84,8 @@ static const struct bcma_device_id_name bcma_bcm_device_names[] = { { BCMA_CORE_I2S, "I2S" }, { BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" }, { BCMA_CORE_SHIM, "SHIM" }, + { BCMA_CORE_PCIE2, "PCIe Gen2" }, + { BCMA_CORE_ARM_CR4, "ARM CR4" }, { BCMA_CORE_DEFAULT, "Default" }, }; diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index f14a98a..2e34db8 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -134,7 +134,10 @@ struct bcma_host_ops { #define BCMA_CORE_I2S 0x834 #define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */ #define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */ -#define BCMA_CORE_ARM_CR4 0x83e +#define BCMA_CORE_PHY_AC 0x83B +#define BCMA_CORE_PCIE2 0x83C /* PCI Express Gen2 */ +#define BCMA_CORE_USB30_DEV 0x83D +#define BCMA_CORE_ARM_CR4 0x83E #define BCMA_CORE_DEFAULT 0xFFF #define BCMA_MAX_NR_CORES 16 -- cgit v0.10.2 From a01ae5b367475e0615144f6243ef6283ff95466f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 9 May 2013 23:04:47 +0200 Subject: net/wireless: ATH9K should depend on HAS_DMA If NO_DMA=y: drivers/built-in.o: In function `ath9k_beacon_generate': drivers/net/wireless/ath/ath9k/beacon.c:146: undefined reference to `dma_unmap_single' drivers/net/wireless/ath/ath9k/beacon.c:174: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/beacon.c:176: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath9k_beacon_remove_slot': drivers/net/wireless/ath/ath9k/beacon.c:252: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_descdma_setup': drivers/net/wireless/ath/ath9k/init.c:382: undefined reference to `dmam_alloc_coherent' drivers/built-in.o: In function `ath_edma_get_buffers': drivers/net/wireless/ath/ath9k/recv.c:616: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_get_next_rx_buf': drivers/net/wireless/ath/ath9k/recv.c:740: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_rx_edma_cleanup': drivers/net/wireless/ath/ath9k/recv.c:176: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_rx_cleanup': drivers/net/wireless/ath/ath9k/recv.c:340: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_rx_edma_buf_link': drivers/net/wireless/ath/ath9k/recv.c:122: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_rx_tasklet': drivers/net/wireless/ath/ath9k/recv.c:1275: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/recv.c:1277: undefined reference to `dma_mapping_error' drivers/net/wireless/ath/ath9k/recv.c:1283: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_rx_edma_init': drivers/net/wireless/ath/ath9k/recv.c:226: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/recv.c:229: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath_rx_init': drivers/net/wireless/ath/ath9k/recv.c:303: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/recv.c:306: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath_tx_complete_buf': drivers/net/wireless/ath/ath9k/xmit.c:2088: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_txstatus_setup': drivers/net/wireless/ath/ath9k/xmit.c:2344: undefined reference to `dmam_alloc_coherent' drivers/built-in.o: In function `ath_tx_set_retry': drivers/net/wireless/ath/ath9k/xmit.c:307: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_tx_setup_buffer': drivers/net/wireless/ath/ath9k/xmit.c:1887: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/xmit.c:1889: undefined reference to `dma_mapping_error' Signed-off-by: Geert Uytterhoeven Cc: Luis R. Rodriguez Cc: John W. Linville Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig index 17507dc..f3dc124 100644 --- a/drivers/net/wireless/ath/ath9k/Kconfig +++ b/drivers/net/wireless/ath/ath9k/Kconfig @@ -17,7 +17,7 @@ config ATH9K_BTCOEX_SUPPORT config ATH9K tristate "Atheros 802.11n wireless cards support" - depends on MAC80211 + depends on MAC80211 && HAS_DMA select ATH9K_HW select MAC80211_LEDS select LEDS_CLASS -- cgit v0.10.2 From af690092ce91a2a6d807cdfcc0b0b9b71ae54d3e Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Fri, 10 May 2013 18:41:06 +0530 Subject: ath9k: Fix crash on module unload Make sure that any open relayfs files are closed before unregistering with mac80211, otherwise this crash is seen: [ 1331.097846] BUG: unable to handle kernel paging request at 6b6b6b8b [ 1331.098170] IP: [] debugfs_remove+0x26/0x80 [ 1331.098170] *pdpt = 000000002f9aa001 *pde = 0000000000000000 [ 1331.098170] Oops: 0000 [#1] PREEMPT SMP [ 1331.098170] Modules linked in: iptable_raw xt_CT nf_conntrack_ipv4 nf_defrag] [ 1331.098170] Pid: 4794, comm: rmmod Tainted: G WC 3.9.1+ #5 To Be Fi. [ 1331.098170] EIP: 0060:[] EFLAGS: 00010202 CPU: 0 [ 1331.098170] EIP is at debugfs_remove+0x26/0x80 [ 1331.098170] EAX: f2f3acd0 EBX: f2f3acd0 ECX: 00000006 EDX: f8622348 [ 1331.098170] ESI: 6b6b6b6b EDI: 00000001 EBP: ee251e14 ESP: ee251e0c [ 1331.098170] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 1331.098170] CR0: 8005003b CR2: 6b6b6b8b CR3: 2e7b7000 CR4: 000007e0 [ 1331.098170] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 1331.098170] DR6: ffff0ff0 DR7: 00000400 [ 1331.098170] Process rmmod (pid: 4794, ti=ee250000 task=efaa2560 task.ti=ee25) [ 1331.098170] Stack: [ 1331.098170] f241e170 0000000a ee251e1c f861394d ee251e28 c04e3088 f241e170 4 [ 1331.098170] c04e30fe f45482b0 ee251e54 c04e3187 f25e86b0 ee251e54 f8618748 0 [ 1331.098170] 0000000a 00000001 ee251e68 f860065b f2509e20 f25085a0 f5b6e8a4 8 [ 1331.098170] Call Trace: [ 1331.098170] [] remove_buf_file_handler+0xd/0x20 [ath9k] [ 1331.098170] [] relay_remove_buf+0x18/0x30 [ 1331.098170] [] relay_close_buf+0x2e/0x40 [ 1331.098170] [] relay_close+0x77/0xf0 [ 1331.098170] [] ? dpd_exit+0x38/0x40 [ath9k] [ 1331.098170] [] ath9k_deinit_softc+0x8b/0xa0 [ath9k] [ 1331.098170] [] ath9k_deinit_device+0x48/0x60 [ath9k] [ 1331.098170] [] ath_pci_remove+0x31/0x50 [ath9k] [ 1331.098170] [] pci_device_remove+0x38/0xc0 [ 1331.098170] [] __device_release_driver+0x64/0xc0 [ 1331.098170] [] driver_detach+0x97/0xa0 [ 1331.098170] [] bus_remove_driver+0x6c/0xe0 [ 1331.098170] [] ? bus_put+0x17/0x20 [ 1331.098170] [] ? bus_remove_driver+0x83/0xe0 [ 1331.098170] [] driver_unregister+0x49/0x80 [ 1331.098170] [] pci_unregister_driver+0x18/0x80 [ 1331.098170] [] ath_pci_exit+0x12/0x20 [ath9k] [ 1331.098170] [] ath9k_exit+0x17/0x337 [ath9k] [ 1331.098170] [] ? mutex_unlock+0xd/0x10 [ 1331.098170] [] sys_delete_module+0x17c/0x250 [ 1331.098170] [] ? do_munmap+0x244/0x2d0 [ 1331.098170] [] ? vm_munmap+0x46/0x60 [ 1331.098170] [] ? restore_all+0xf/0xf [ 1331.098170] [] ? __do_page_fault+0x4c0/0x4c0 [ 1331.098170] [] ? trace_hardirqs_on_caller+0xf4/0x180 [ 1331.098170] [] sysenter_do_call+0x12/0x38 [ 1331.098170] Code: 90 8d 74 26 00 55 89 e5 83 ec 08 89 1c 24 89 74 24 04 3e 82 [ 1331.098170] EIP: [] debugfs_remove+0x26/0x80 SS:ESP 0068:ee251e0c [ 1331.098170] CR2: 000000006b6b6b8b [ 1331.727971] ---[ end trace b5bb9f2066cef7f9 ]--- Cc: Acked-by: Simon Wunderlich Tested-by: Ben Greear Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c index e6307b8..b37eb8d 100644 --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c @@ -2008,6 +2008,14 @@ void ath9k_get_et_stats(struct ieee80211_hw *hw, WARN_ON(i != ATH9K_SSTATS_LEN); } +void ath9k_deinit_debug(struct ath_softc *sc) +{ + if (config_enabled(CONFIG_ATH9K_DEBUGFS) && sc->rfs_chan_spec_scan) { + relay_close(sc->rfs_chan_spec_scan); + sc->rfs_chan_spec_scan = NULL; + } +} + int ath9k_init_debug(struct ath_hw *ah) { struct ath_common *common = ath9k_hw_common(ah); diff --git a/drivers/net/wireless/ath/ath9k/debug.h b/drivers/net/wireless/ath/ath9k/debug.h index 794a7ec..9d49aab 100644 --- a/drivers/net/wireless/ath/ath9k/debug.h +++ b/drivers/net/wireless/ath/ath9k/debug.h @@ -304,6 +304,7 @@ struct ath9k_debug { }; int ath9k_init_debug(struct ath_hw *ah); +void ath9k_deinit_debug(struct ath_softc *sc); void ath_debug_stat_interrupt(struct ath_softc *sc, enum ath9k_int status); void ath_debug_stat_tx(struct ath_softc *sc, struct ath_buf *bf, @@ -339,6 +340,10 @@ static inline int ath9k_init_debug(struct ath_hw *ah) return 0; } +static inline void ath9k_deinit_debug(struct ath_softc *sc) +{ +} + static inline void ath_debug_stat_interrupt(struct ath_softc *sc, enum ath9k_int status) { diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 0237b28..aba4151 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -906,7 +906,7 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, if (!ath_is_world_regd(reg)) { error = regulatory_hint(hw->wiphy, reg->alpha2); if (error) - goto unregister; + goto debug_cleanup; } ath_init_leds(sc); @@ -914,6 +914,8 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, return 0; +debug_cleanup: + ath9k_deinit_debug(sc); unregister: ieee80211_unregister_hw(hw); rx_cleanup: @@ -942,11 +944,6 @@ static void ath9k_deinit_softc(struct ath_softc *sc) sc->dfs_detector->exit(sc->dfs_detector); ath9k_eeprom_release(sc); - - if (config_enabled(CONFIG_ATH9K_DEBUGFS) && sc->rfs_chan_spec_scan) { - relay_close(sc->rfs_chan_spec_scan); - sc->rfs_chan_spec_scan = NULL; - } } void ath9k_deinit_device(struct ath_softc *sc) @@ -960,6 +957,7 @@ void ath9k_deinit_device(struct ath_softc *sc) ath9k_ps_restore(sc); + ath9k_deinit_debug(sc); ieee80211_unregister_hw(hw); ath_rx_cleanup(sc); ath9k_deinit_softc(sc); -- cgit v0.10.2 From 58dd3ff86b4854cf6a60b60ab5eb57dbd0a2b4ad Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sun, 12 May 2013 21:43:46 -0500 Subject: rtlwifi: rtl8188ee: Fix warning when building on big-endian systems In http://lkml.indiana.edu/hypermail/linux/kernel/1305.1/index.html, Geert Uytterhoeven reports a new warning when building 3.10-rc1 in this driver. This is caused by using a "#if" test to see if __LITTLE_ENDIAN is set, which fails for all big-endian systems. Change to "ifdef". Signed-off-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/trx.h b/drivers/net/wireless/rtlwifi/rtl8188ee/trx.h index d3a02e7..21ca33a 100644 --- a/drivers/net/wireless/rtlwifi/rtl8188ee/trx.h +++ b/drivers/net/wireless/rtlwifi/rtl8188ee/trx.h @@ -550,7 +550,7 @@ do { \ rxmcs == DESC92C_RATE11M) struct phy_rx_agc_info_t { - #if __LITTLE_ENDIAN + #ifdef __LITTLE_ENDIAN u8 gain:7, trsw:1; #else u8 trsw:1, gain:7; @@ -574,7 +574,7 @@ struct phy_status_rpt { u8 stream_target_csi[2]; u8 sig_evm; u8 rsvd_3; -#if __LITTLE_ENDIAN +#ifdef __LITTLE_ENDIAN u8 antsel_rx_keep_2:1; /*ex_intf_flg:1;*/ u8 sgi_en:1; u8 rxsc:2; -- cgit v0.10.2 From 9af221b3138903bd792cc74e68280cb557e95983 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Tue, 14 May 2013 20:52:36 +0200 Subject: brcmfmac: announce P2P_DEVICE support in wiphy structure P2P_DEVICE support was removed from brcmfmac for v3.9 kernel with the commit below: commit 1527c343c12f3a2aae532aa881d12c6fbf8749f4 Author: Arend van Spriel Date: Thu Apr 4 12:10:11 2013 +0200 brcmfmac: remove advertising P2P device support However, it got merged into wireless-next. But for 3.10 brcmfmac does support P2P device. Putting it back with this commit. Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 6d758f2..761f501 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4140,6 +4140,10 @@ static const struct ieee80211_iface_limit brcmf_iface_limits[] = { .types = BIT(NL80211_IFTYPE_P2P_CLIENT) | BIT(NL80211_IFTYPE_P2P_GO) }, + { + .max = 1, + .types = BIT(NL80211_IFTYPE_P2P_DEVICE) + } }; static const struct ieee80211_iface_combination brcmf_iface_combos[] = { { @@ -4197,7 +4201,8 @@ static struct wiphy *brcmf_setup_wiphy(struct device *phydev) BIT(NL80211_IFTYPE_ADHOC) | BIT(NL80211_IFTYPE_AP) | BIT(NL80211_IFTYPE_P2P_CLIENT) | - BIT(NL80211_IFTYPE_P2P_GO); + BIT(NL80211_IFTYPE_P2P_GO) | + BIT(NL80211_IFTYPE_P2P_DEVICE); wiphy->iface_combinations = brcmf_iface_combos; wiphy->n_iface_combinations = ARRAY_SIZE(brcmf_iface_combos); wiphy->bands[IEEE80211_BAND_2GHZ] = &__wl_band_2ghz; -- cgit v0.10.2 From 707a61528bc9709653a56d4cefa383f793732598 Mon Sep 17 00:00:00 2001 From: Albert Pool Date: Wed, 15 May 2013 10:03:16 -0500 Subject: rtlwifi: rtl8192cu: Add new USB ID This adds the USB ID of the On Networks N300MA, clone of Netgear WNA3100M. Signed-off-by: Albert Pool Signed-off-by: Larry Finger Reported-by: Ana Rey Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c index 23d640a..938b1e6 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c @@ -349,6 +349,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = { {RTL_USB_DEVICE(0x07aa, 0x0056, rtl92cu_hal_cfg)}, /*ATKK-Gemtek*/ {RTL_USB_DEVICE(0x07b8, 0x8178, rtl92cu_hal_cfg)}, /*Funai -Abocom*/ {RTL_USB_DEVICE(0x0846, 0x9021, rtl92cu_hal_cfg)}, /*Netgear-Sercomm*/ + {RTL_USB_DEVICE(0x0846, 0xf001, rtl92cu_hal_cfg)}, /*On Netwrks N300MA*/ {RTL_USB_DEVICE(0x0b05, 0x17ab, rtl92cu_hal_cfg)}, /*ASUS-Edimax*/ {RTL_USB_DEVICE(0x0bda, 0x8186, rtl92cu_hal_cfg)}, /*Realtek 92CE-VAU*/ {RTL_USB_DEVICE(0x0df6, 0x0061, rtl92cu_hal_cfg)}, /*Sitecom-Edimax*/ -- cgit v0.10.2 From e99c60b58b595eaa1c279922ae29d5397c787294 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Thu, 16 May 2013 22:47:34 +0530 Subject: ath9k_hw: Enable manual peak calibration for AR9485 Manual peak calibration is currently enabled only for AR9462 and AR9565. This is also required for AR9485. The initvals are also modified to disable HW peak calibration. Cc: Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index 639ba7d..6988e1d 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -965,7 +965,7 @@ static void ar9003_hw_do_manual_peak_cal(struct ath_hw *ah, { int i; - if (!AR_SREV_9462(ah) && !AR_SREV_9565(ah)) + if (!AR_SREV_9462(ah) && !AR_SREV_9565(ah) && !AR_SREV_9485(ah)) return; for (i = 0; i < AR9300_MAX_CHAINS; i++) { diff --git a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h index 712f415..88ff1d7 100644 --- a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h @@ -1020,7 +1020,7 @@ static const u32 ar9485_1_1_baseband_postamble[][5] = { {0x0000a284, 0x00000000, 0x00000000, 0x000002a0, 0x000002a0}, {0x0000a288, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x0000a28c, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, - {0x0000a2c4, 0x00158d18, 0x00158d18, 0x00158d18, 0x00158d18}, + {0x0000a2c4, 0x00158d18, 0x00158d18, 0x00058d18, 0x00058d18}, {0x0000a2d0, 0x00071981, 0x00071981, 0x00071982, 0x00071982}, {0x0000a2d8, 0xf999a83a, 0xf999a83a, 0xf999a83a, 0xf999a83a}, {0x0000a358, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, -- cgit v0.10.2 From 16e23428024e4dc6b5ba5f6d36c57c49d33fe85b Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 17 May 2013 12:58:24 +0200 Subject: ath9k: fix aggregation stop/flush handling When aggregation stop is requested, don't run the mac80211 aggregation stop callback yet, while the session is still blocked. Also, when aggregation flush is requested, don't run the callback at all. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 8a1888d..366002f 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -254,6 +254,7 @@ struct ath_atx_tid { int sched; int paused; u8 state; + bool stop_cb; }; struct ath_node { @@ -351,7 +352,8 @@ void ath_tx_tasklet(struct ath_softc *sc); void ath_tx_edma_tasklet(struct ath_softc *sc); int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid, u16 *ssn); -void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid); +bool ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid, + bool flush); void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid); void ath_tx_aggr_wakeup(struct ath_softc *sc, struct ath_node *an); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index a18414b..2382d12 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1687,6 +1687,7 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw, u16 tid, u16 *ssn, u8 buf_size) { struct ath_softc *sc = hw->priv; + bool flush = false; int ret = 0; local_bh_disable(); @@ -1703,12 +1704,13 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw, ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); ath9k_ps_restore(sc); break; - case IEEE80211_AMPDU_TX_STOP_CONT: case IEEE80211_AMPDU_TX_STOP_FLUSH: case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: + flush = true; + case IEEE80211_AMPDU_TX_STOP_CONT: ath9k_ps_wakeup(sc); - ath_tx_aggr_stop(sc, sta, tid); - ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); + if (ath_tx_aggr_stop(sc, sta, tid, flush)) + ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); ath9k_ps_restore(sc); break; case IEEE80211_AMPDU_TX_OPERATIONAL: diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index eab0fcb..a47bf69 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -164,7 +164,20 @@ static void ath_set_rates(struct ieee80211_vif *vif, struct ieee80211_sta *sta, ARRAY_SIZE(bf->rates)); } -static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid) +static void ath_tx_clear_tid(struct ath_softc *sc, struct ath_atx_tid *tid) +{ + tid->state &= ~AGGR_ADDBA_COMPLETE; + tid->state &= ~AGGR_CLEANUP; + if (!tid->stop_cb) + return; + + ieee80211_start_tx_ba_cb_irqsafe(tid->an->vif, tid->an->sta->addr, + tid->tidno); + tid->stop_cb = false; +} + +static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid, + bool flush_packets) { struct ath_txq *txq = tid->ac->txq; struct sk_buff *skb; @@ -181,16 +194,15 @@ static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid) while ((skb = __skb_dequeue(&tid->buf_q))) { fi = get_frame_info(skb); bf = fi->bf; + if (!bf && !flush_packets) + bf = ath_tx_setup_buffer(sc, txq, tid, skb); if (!bf) { - bf = ath_tx_setup_buffer(sc, txq, tid, skb); - if (!bf) { - ieee80211_free_txskb(sc->hw, skb); - continue; - } + ieee80211_free_txskb(sc->hw, skb); + continue; } - if (fi->retries) { + if (fi->retries || flush_packets) { list_add_tail(&bf->list, &bf_head); ath_tx_update_baw(sc, tid, bf->bf_state.seqno); ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0); @@ -201,12 +213,10 @@ static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid) } } - if (tid->baw_head == tid->baw_tail) { - tid->state &= ~AGGR_ADDBA_COMPLETE; - tid->state &= ~AGGR_CLEANUP; - } + if (tid->baw_head == tid->baw_tail) + ath_tx_clear_tid(sc, tid); - if (sendbar) { + if (sendbar && !flush_packets) { ath_txq_unlock(sc, txq); ath_send_bar(tid, tid->seq_start); ath_txq_lock(sc, txq); @@ -602,7 +612,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, } if (tid->state & AGGR_CLEANUP) - ath_tx_flush_tid(sc, tid); + ath_tx_flush_tid(sc, tid, false); rcu_read_unlock(); @@ -1256,18 +1266,23 @@ int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta, return 0; } -void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid) +bool ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid, + bool flush) { struct ath_node *an = (struct ath_node *)sta->drv_priv; struct ath_atx_tid *txtid = ATH_AN_2_TID(an, tid); struct ath_txq *txq = txtid->ac->txq; + bool ret = !flush; + + if (flush) + txtid->stop_cb = false; if (txtid->state & AGGR_CLEANUP) - return; + return false; if (!(txtid->state & AGGR_ADDBA_COMPLETE)) { txtid->state &= ~AGGR_ADDBA_PROGRESS; - return; + return ret; } ath_txq_lock(sc, txq); @@ -1279,13 +1294,17 @@ void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid) * TID can only be reused after all in-progress subframes have been * completed. */ - if (txtid->baw_head != txtid->baw_tail) + if (txtid->baw_head != txtid->baw_tail) { txtid->state |= AGGR_CLEANUP; - else + ret = false; + txtid->stop_cb = !flush; + } else { txtid->state &= ~AGGR_ADDBA_COMPLETE; + } - ath_tx_flush_tid(sc, txtid); + ath_tx_flush_tid(sc, txtid, flush); ath_txq_unlock_complete(sc, txq); + return ret; } void ath_tx_aggr_sleep(struct ieee80211_sta *sta, struct ath_softc *sc, @@ -2415,6 +2434,7 @@ void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an) tid->ac = &an->ac[acno]; tid->state &= ~AGGR_ADDBA_COMPLETE; tid->state &= ~AGGR_ADDBA_PROGRESS; + tid->stop_cb = false; } for (acno = 0, ac = &an->ac[acno]; @@ -2451,8 +2471,7 @@ void ath_tx_node_cleanup(struct ath_softc *sc, struct ath_node *an) } ath_tid_drain(sc, txq, tid); - tid->state &= ~AGGR_ADDBA_COMPLETE; - tid->state &= ~AGGR_CLEANUP; + ath_tx_clear_tid(sc, tid); ath_txq_unlock(sc, txq); } -- cgit v0.10.2 From 0c585dda3574e40f562c362eaa326a98b1e49d02 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 17 May 2013 12:58:25 +0200 Subject: ath9k: fix rate handling/reporting This patch fixes some issues introduced in the rate control API rework. When not running aggregation, copy bf->rates into info->control.rates before applying the rate control status to it. In ath_lookup_rate, the rates need to be pulled from bf->rates, not the tx info. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index a47bf69..ad6e0b3 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -630,6 +630,7 @@ static void ath_tx_process_buffer(struct ath_softc *sc, struct ath_txq *txq, struct ath_tx_status *ts, struct ath_buf *bf, struct list_head *bf_head) { + struct ieee80211_tx_info *info; bool txok, flush; txok = !(ts->ts_status & ATH9K_TXERR_MASK); @@ -641,8 +642,12 @@ static void ath_tx_process_buffer(struct ath_softc *sc, struct ath_txq *txq, txq->axq_ampdu_depth--; if (!bf_isampdu(bf)) { - if (!flush) + if (!flush) { + info = IEEE80211_SKB_CB(bf->bf_mpdu); + memcpy(info->control.rates, bf->rates, + sizeof(info->control.rates)); ath_tx_rc_status(sc, bf, ts, 1, txok ? 0 : 1, txok); + } ath_tx_complete_buf(sc, bf, txq, bf_head, ts, txok); } else ath_tx_complete_aggr(sc, txq, bf, bf_head, ts, txok); @@ -686,7 +691,7 @@ static u32 ath_lookup_rate(struct ath_softc *sc, struct ath_buf *bf, skb = bf->bf_mpdu; tx_info = IEEE80211_SKB_CB(skb); - rates = tx_info->control.rates; + rates = bf->rates; /* * Find the lowest frame length among the rate series that will have a -- cgit v0.10.2 From 6bb4880d9ef30375da4507aeabd6dc261a2c6c2b Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 17 May 2013 12:58:26 +0200 Subject: ath9k: fix draining aggregation tid buffers After a tx attempt, an A-MPDU subframe can still have fi->retries at 0 (if the retry count wasn't incremented due to powersave). In that case it is still tracked as part of the block ack window, so when draining the tid queue, its sequence number needs to be cleared from the pending frame bitmap. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index ad6e0b3..14bb335 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -287,9 +287,7 @@ static void ath_tid_drain(struct ath_softc *sc, struct ath_txq *txq, list_add_tail(&bf->list, &bf_head); - if (fi->retries) - ath_tx_update_baw(sc, tid, bf->bf_state.seqno); - + ath_tx_update_baw(sc, tid, bf->bf_state.seqno); ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0); } -- cgit v0.10.2 From bda97ed39b075e8ac125d4af7cdf60ca19449a16 Mon Sep 17 00:00:00 2001 From: Libo Chen Date: Fri, 17 May 2013 05:21:31 +0000 Subject: MIPS: Xway: Fix clk leak When gptu_r32 fails, we should put clk before returning. Signed-off-by: Libo Chen Acked-by: John Crispin Cc: grant.likely@linaro.org Cc: rob.herring@calxeda.com, Cc: linux-mips@linux-mips.org Cc: LKML linux-kernel@vger.kernel.org Cc: Andrew Morton akpm@linux-foundation.org Cc: Li Zefan lizefan@huawei.com Patchwork: https://patchwork.linux-mips.org/patch/5247/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/lantiq/xway/gptu.c b/arch/mips/lantiq/xway/gptu.c index 9861c86..4fa577c 100644 --- a/arch/mips/lantiq/xway/gptu.c +++ b/arch/mips/lantiq/xway/gptu.c @@ -169,6 +169,8 @@ static int gptu_probe(struct platform_device *pdev) if (((gptu_r32(GPTU_ID) >> 8) & 0xff) != GPTU_MAGIC) { dev_err(&pdev->dev, "Failed to find magic\n"); gptu_hwexit(); + clk_disable(clk); + clk_put(clk); return -ENAVAIL; } -- cgit v0.10.2 From e84ff42500a2b909d8aaca9a6df84c0616df121f Mon Sep 17 00:00:00 2001 From: EunBong Song Date: Mon, 13 May 2013 00:16:55 +0000 Subject: MIPS: Fix build error for crash_dump.c in 3.10-rc1 This patch fixes crash_dump.c build error. Build error logs are as follow. arch/mips/kernel/crash_dump.c: In function 'kdump_buf_page_init': arch/mips/kernel/crash_dump.c:67: error: implicit declaration of function 'kmalloc' arch/mips/kernel/crash_dump.c:67: error: assignment makes pointer from integer without a cast Signed-off-by: EunBong Song Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5238/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/crash_dump.c b/arch/mips/kernel/crash_dump.c index 35bed0d..3be9e7b 100644 --- a/arch/mips/kernel/crash_dump.c +++ b/arch/mips/kernel/crash_dump.c @@ -2,6 +2,7 @@ #include #include #include +#include static int __init parse_savemaxmem(char *p) { -- cgit v0.10.2 From 49c426ba445f83d304a5eab3d49efa123329cf2b Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 7 May 2013 17:11:16 +0000 Subject: MIPS: Make virt_to_phys() work for all unmapped addresses. As reported: This problem was discovered when doing BGP traffic with the TCP MD5 option activated, where the following call chain caused a crash: * tcp_v4_rcv * tcp_v4_timewait_ack * tcp_v4_send_ack -> follow stack variable rep.th * tcp_v4_md5_hash_hdr * tcp_md5_hash_header * sg_init_one * sg_set_buf * virt_to_page I noticed that tcp_v4_send_reset uses a similar stack variable and also calls tcp_v4_md5_hash_hdr, so it has the same problem. The networking core can indirectly call virt_to_phys() on stack addresses, if this is done from PID 0, the stack will usually be in CKSEG0, so virt_to_phys() needs to work there as well Signed-off-by: David Daney Cc: linux-mips@linux-mips.org Cc: Jiang Liu Cc: eunb.song@samsung.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5220/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h index 1be1372..b7e5985 100644 --- a/arch/mips/include/asm/io.h +++ b/arch/mips/include/asm/io.h @@ -118,7 +118,7 @@ static inline void set_io_port_base(unsigned long base) */ static inline unsigned long virt_to_phys(volatile const void *address) { - return (unsigned long)address - PAGE_OFFSET + PHYS_OFFSET; + return __pa(address); } /* diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h index eab99e5..ec1ca53 100644 --- a/arch/mips/include/asm/page.h +++ b/arch/mips/include/asm/page.h @@ -46,7 +46,6 @@ #endif /* CONFIG_MIPS_HUGE_TLB_SUPPORT */ #include -#include extern void build_clear_page(void); extern void build_copy_page(void); @@ -151,6 +150,7 @@ typedef struct { unsigned long pgprot; } pgprot_t; ((unsigned long)(x) - PAGE_OFFSET + PHYS_OFFSET) #endif #define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET - PHYS_OFFSET)) +#include /* * RELOC_HIDE was originally added by 6007b903dfe5f1d13e0c711ac2894bdd4a61b1ad -- cgit v0.10.2 From d552b233f692416d63bb93eb35bf24e5c95c7e0b Mon Sep 17 00:00:00 2001 From: Denis Efremov Date: Thu, 9 May 2013 09:36:57 +0000 Subject: MIPS: MSP71xx: remove inline marking of EXPORT_SYMBOL functions EXPORT_SYMBOL and inline directives are contradictory to each other. The patch fixes this inconsistency. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Denis Efremov Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: trivial@kernel.org Cc: ldv-project@linuxtesting.org Patchwork: https://patchwork.linux-mips.org/patch/5227/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/pmcs-msp71xx/msp_prom.c b/arch/mips/pmcs-msp71xx/msp_prom.c index 0edb89a..1c98975 100644 --- a/arch/mips/pmcs-msp71xx/msp_prom.c +++ b/arch/mips/pmcs-msp71xx/msp_prom.c @@ -83,7 +83,7 @@ static inline unsigned char str2hexnum(unsigned char c) return 0; /* foo */ } -static inline int str2eaddr(unsigned char *ea, unsigned char *str) +int str2eaddr(unsigned char *ea, unsigned char *str) { int index = 0; unsigned char num = 0; -- cgit v0.10.2 From fbe06b7bae7c9cf6ab05168fce5ee93b2f4bae7c Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 17 May 2013 11:49:10 -0700 Subject: x86, range: fix missing merge during add range MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Christian found v3.9 does not work with E350 with EFI is enabled. [ 1.658832] Trying to unpack rootfs image as initramfs... [ 1.679935] BUG: unable to handle kernel paging request at ffff88006e3fd000 [ 1.686940] IP: [] memset+0x1f/0xb0 [ 1.692010] PGD 1f77067 PUD 1f7a067 PMD 61420067 PTE 0 but early memtest report all memory could be accessed without problem. early page table is set in following sequence: [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] init_memory_mapping: [mem 0x6e600000-0x6e7fffff] [ 0.000000] init_memory_mapping: [mem 0x6c000000-0x6e5fffff] [ 0.000000] init_memory_mapping: [mem 0x00100000-0x6bffffff] [ 0.000000] init_memory_mapping: [mem 0x6e800000-0x6ea07fff] but later efi_enter_virtual_mode try set mapping again wrongly. [ 0.010644] pid_max: default: 32768 minimum: 301 [ 0.015302] init_memory_mapping: [mem 0x640c5000-0x6e3fcfff] that means it fails with pfn_range_is_mapped. It turns out that we have a bug in add_range_with_merge and it does not merge range properly when new add one fill the hole between two exsiting ranges. In the case when [mem 0x00100000-0x6bffffff] is the hole between [mem 0x00000000-0x000fffff] and [mem 0x6c000000-0x6e7fffff]. Fix the add_range_with_merge by calling itself recursively. Reported-by: "Christian König" Signed-off-by: Yinghai Lu Link: http://lkml.kernel.org/r/CAE9FiQVofGoSk7q5-0irjkBxemqK729cND4hov-1QCBJDhxpgQ@mail.gmail.com Cc: v3.9 Signed-off-by: H. Peter Anvin diff --git a/kernel/range.c b/kernel/range.c index 071b0ab..eb911db 100644 --- a/kernel/range.c +++ b/kernel/range.c @@ -48,9 +48,11 @@ int add_range_with_merge(struct range *range, int az, int nr_range, final_start = min(range[i].start, start); final_end = max(range[i].end, end); - range[i].start = final_start; - range[i].end = final_end; - return nr_range; + /* clear it and add it back for further merge */ + range[i].start = 0; + range[i].end = 0; + return add_range_with_merge(range, az, nr_range, + final_start, final_end); } /* Need to add it: */ -- cgit v0.10.2 From 7138143972b7c293267c783fc99a194f0ceff7f2 Mon Sep 17 00:00:00 2001 From: "Gomella, Andrew (NIH/NHLBI) [F]" Date: Fri, 17 May 2013 17:39:46 +0000 Subject: USB: ftdi_sio: Add support for Newport CONEX motor drivers Here are two more devices that use FTDI USB-to-serial chips with new product ID's. The devices are the Newport Conex-AGP and Conex-CC motor controllers. (http://www.newport.com/CONEX-AGP-Integrated-Piezo-Motor-Rotation-Stages-/987623/1033/info.aspx) (http://www.newport.com/CONEX-CC-DC-Servo-Controller-Actuators/934114/1033/info.aspx) usb-devices command yields: P: Vendor=104d ProdID=3002 Rev=06.00 S: Manufacturer=Newport S: Product=CONEX-CC as well as P: Vendor=104d ProdID=3006 Rev=06.00 S: Manufacturer=Newport S: Product=CONEX-AGP Signed-off-by: Andrew Gomella Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index a62a75a..7260ec6 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -189,6 +189,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_BOOST_PID) }, { USB_DEVICE(NEWPORT_VID, NEWPORT_AGILIS_PID) }, + { USB_DEVICE(NEWPORT_VID, NEWPORT_CONEX_CC_PID) }, + { USB_DEVICE(NEWPORT_VID, NEWPORT_CONEX_AGP_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SPROG_II) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 9852827..6dd7925 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -772,6 +772,8 @@ */ #define NEWPORT_VID 0x104D #define NEWPORT_AGILIS_PID 0x3000 +#define NEWPORT_CONEX_CC_PID 0x3002 +#define NEWPORT_CONEX_AGP_PID 0x3006 /* Interbiometrics USB I/O Board */ /* Developed for Interbiometrics by Rudolf Gugler */ -- cgit v0.10.2 From e7438c4b893e87311d2fb0facb3e6a0df17abe01 Mon Sep 17 00:00:00 2001 From: Tony Wu Date: Sun, 12 May 2013 15:04:29 +0000 Subject: MIPS: Fix sibling call handling in get_frame_info Given a function, get_frame_info() analyzes its instructions to figure out frame size and return address. get_frame_info() works as follows: 1. analyze up to 128 instructions if the function size is unknown 2. search for 'addiu/daddiu sp,sp,-immed' for frame size 3. search for 'sw ra,offset(sp)' for return address 4. end search when it sees jr/jal/jalr This leads to an issue when the given function is a sibling call, example shown as follows. 801ca110 : 801ca110: 8f820000 lw v0,0(gp) 801ca114: 8c420000 lw v0,0(v0) 801ca118: 080726f0 j 801c9bc0 <__schedule> 801ca11c: 00000000 nop 801ca120 : 801ca120: 27bdffe8 addiu sp,sp,-24 801ca124: 3c028022 lui v0,0x8022 801ca128: afbf0014 sw ra,20(sp) In this case, get_frame_info() cannot properly detect schedule's frame info, and eventually returns io_schedule's instead. This patch adds 'j' to the end search condition to workaround sibling call cases. Signed-off-by: Tony Wu Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5236/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index eb902c1..785bf2a 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -264,7 +264,7 @@ static inline int is_ra_save_ins(union mips_instruction *ip) #endif } -static inline int is_jal_jalr_jr_ins(union mips_instruction *ip) +static inline int is_jump_ins(union mips_instruction *ip) { #ifdef CONFIG_CPU_MICROMIPS /* @@ -288,6 +288,8 @@ static inline int is_jal_jalr_jr_ins(union mips_instruction *ip) return 0; return (((ip->u_format.uimmediate >> 6) & mm_jalr_op) == mm_jalr_op); #else + if (ip->j_format.opcode == j_op) + return 1; if (ip->j_format.opcode == jal_op) return 1; if (ip->r_format.opcode != spec_op) @@ -350,7 +352,7 @@ static int get_frame_info(struct mips_frame_info *info) for (i = 0; i < max_insns; i++, ip++) { - if (is_jal_jalr_jr_ins(ip)) + if (is_jump_ins(ip)) break; if (!info->frame_size) { if (is_sp_move_ins(ip)) -- cgit v0.10.2 From 5000653e923de49aa282fd7d172eb6528c3ec5c7 Mon Sep 17 00:00:00 2001 From: Tony Wu Date: Sun, 12 May 2013 15:05:34 +0000 Subject: MIPS: Extract schedule_mfi info from __schedule schedule_mfi is supposed to be extracted from schedule(), and is used in thread_saved_pc and get_wchan. But, after optimization, schedule() is reduced to a sibling call to __schedule(), and no real frame info can be extracted. One solution is to compile schedule() with -fno-omit-frame-pointer and -fno-optimize-sibling-calls, but that will incur performance degradation. Another solution is to extract info from the real scheduler, __schedule, and this is the approache adopted here. This patch reads the __schedule address by either following the 'j' call in schedule if KALLSYMS is disabled or by using kallsyms_lookup_name to lookup __schedule if KALLSYMS is available, then, extracts schedule_mfi from __schedule frame info. This patch also fixes the "Can't analyze schedule() prologue" warning at boot time. Signed-off-by: Tony Wu Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5237/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 785bf2a..a682a87 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -224,6 +224,9 @@ struct mips_frame_info { int pc_offset; }; +#define J_TARGET(pc,target) \ + (((unsigned long)(pc) & 0xf0000000) | ((target) << 2)) + static inline int is_ra_save_ins(union mips_instruction *ip) { #ifdef CONFIG_CPU_MICROMIPS @@ -395,15 +398,42 @@ err: static struct mips_frame_info schedule_mfi __read_mostly; +#ifdef CONFIG_KALLSYMS +static unsigned long get___schedule_addr(void) +{ + return kallsyms_lookup_name("__schedule"); +} +#else +static unsigned long get___schedule_addr(void) +{ + union mips_instruction *ip = (void *)schedule; + int max_insns = 8; + int i; + + for (i = 0; i < max_insns; i++, ip++) { + if (ip->j_format.opcode == j_op) + return J_TARGET(ip, ip->j_format.target); + } + return 0; +} +#endif + static int __init frame_info_init(void) { unsigned long size = 0; #ifdef CONFIG_KALLSYMS unsigned long ofs; +#endif + unsigned long addr; - kallsyms_lookup_size_offset((unsigned long)schedule, &size, &ofs); + addr = get___schedule_addr(); + if (!addr) + addr = (unsigned long)schedule; + +#ifdef CONFIG_KALLSYMS + kallsyms_lookup_size_offset(addr, &size, &ofs); #endif - schedule_mfi.func = schedule; + schedule_mfi.func = (void *)addr; schedule_mfi.func_size = size; get_frame_info(&schedule_mfi); -- cgit v0.10.2 From 2792d42fe69e098a6e08ed814f49953b52874805 Mon Sep 17 00:00:00 2001 From: Matthijs Kooijman Date: Thu, 9 May 2013 06:32:09 +0000 Subject: MIPS: ralink: use the dwc2 driver for the rt305x USB controller This sets up the devicetree file for the rt3050 chip series and rt3052 eval board to use the right compatible string for the dwc2 driver. Acked-by: John Crispin Cc: blogic@openwrt.org Cc: linux-mips@linux-mips.org Cc: Matthijs Kooijman Patchwork: https://patchwork.linux-mips.org/patch/5226/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/ralink/dts/rt3050.dtsi b/arch/mips/ralink/dts/rt3050.dtsi index ef7da1e..e3203d4 100644 --- a/arch/mips/ralink/dts/rt3050.dtsi +++ b/arch/mips/ralink/dts/rt3050.dtsi @@ -55,4 +55,14 @@ reg-shift = <2>; }; }; + + usb@101c0000 { + compatible = "ralink,rt3050-usb", "snps,dwc2"; + reg = <0x101c0000 40000>; + + interrupt-parent = <&intc>; + interrupts = <18>; + + status = "disabled"; + }; }; diff --git a/arch/mips/ralink/dts/rt3052_eval.dts b/arch/mips/ralink/dts/rt3052_eval.dts index c18c9a8..0ac73ea 100644 --- a/arch/mips/ralink/dts/rt3052_eval.dts +++ b/arch/mips/ralink/dts/rt3052_eval.dts @@ -43,4 +43,8 @@ reg = <0x50000 0x7b0000>; }; }; + + usb@101c0000 { + status = "ok"; + }; }; -- cgit v0.10.2 From 3f327e39b4b8f760c331bb2836735be6d83fbf53 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 7 May 2013 11:06:03 -0600 Subject: PCI: acpiphp: Re-enumerate devices when host bridge receives Bus Check When a PCI host bridge device receives a Bus Check notification, we must re-enumerate starting with the bridge to discover changes (devices that have been added or removed). Prior to 668192b678 ("PCI: acpiphp: Move host bridge hotplug to pci_root.c"), this happened in _handle_hotplug_event_bridge(). After that commit, _handle_hotplug_event_bridge() is not installed for host bridges, and the host bridge notify handler, _handle_hotplug_event_root() did not re-enumerate. This patch adds re-enumeration to _handle_hotplug_event_root(). This fixes cases where we don't notice the addition or removal of PCI devices, e.g., the PCI-to-USB ExpressCard in the bugzilla below. [bhelgaas: changelog, references] Reference: https://lkml.kernel.org/r/CAAh6nkmbKR3HTqm5ommevsBwhL_u0N8Rk7Wsms_LfP=nBgKNew@mail.gmail.com Reference: https://bugzilla.kernel.org/show_bug.cgi?id=57961 Reported-by: Gavin Guo Tested-by: Gavin Guo Signed-off-by: Yinghai Lu Signed-off-by: Bjorn Helgaas Reviewed-by: Jiang Liu Acked-by: Rafael J. Wysocki CC: stable@vger.kernel.org # v3.9+ diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 1dd6f6c..e427dc5 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -641,7 +641,9 @@ static void _handle_hotplug_event_root(struct work_struct *work) /* bus enumerate */ printk(KERN_DEBUG "%s: Bus check notify on %s\n", __func__, (char *)buffer.pointer); - if (!root) + if (root) + acpiphp_check_host_bridge(handle); + else handle_root_bridge_insertion(handle); break; diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 96fed19..716aa93 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -950,6 +950,20 @@ check_sub_bridges(acpi_handle handle, u32 lvl, void *context, void **rv) return AE_OK ; } +void acpiphp_check_host_bridge(acpi_handle handle) +{ + struct acpiphp_bridge *bridge; + + bridge = acpiphp_handle_to_bridge(handle); + if (bridge) { + acpiphp_check_bridge(bridge); + put_bridge(bridge); + } + + acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, + ACPI_UINT32_MAX, check_sub_bridges, NULL, NULL, NULL); +} + static void _handle_hotplug_event_bridge(struct work_struct *work) { struct acpiphp_bridge *bridge; diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h index 81b3161..1704479 100644 --- a/include/linux/pci-acpi.h +++ b/include/linux/pci-acpi.h @@ -60,11 +60,13 @@ static inline void acpi_pci_slot_remove(struct pci_bus *bus) { } void acpiphp_init(void); void acpiphp_enumerate_slots(struct pci_bus *bus, acpi_handle handle); void acpiphp_remove_slots(struct pci_bus *bus); +void acpiphp_check_host_bridge(acpi_handle handle); #else static inline void acpiphp_init(void) { } static inline void acpiphp_enumerate_slots(struct pci_bus *bus, acpi_handle handle) { } static inline void acpiphp_remove_slots(struct pci_bus *bus) { } +static inline void acpiphp_check_host_bridge(acpi_handle handle) { } #endif #else /* CONFIG_ACPI */ -- cgit v0.10.2 From 60b62978bc5e903cd487de34972fb30f76c74a2e Mon Sep 17 00:00:00 2001 From: David Sterba Date: Tue, 30 Apr 2013 17:29:29 +0000 Subject: btrfs: annotate quota tree for lockdep Quota tree has been missing from lockdep annotations, though no warning has been seen in the wild. There's currently one entry that does not belong there, BTRFS_ORPHAN_OBJECTID. No such tree exists, it's probably a copy & paste mistake, the id is defined among tree ids. Signed-off-by: David Sterba Signed-off-by: Josef Bacik diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 63c328a..2720d55 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -88,12 +88,12 @@ struct btrfs_ordered_sum; /* holds checksums of all the data extents */ #define BTRFS_CSUM_TREE_OBJECTID 7ULL -/* for storing balance parameters in the root tree */ -#define BTRFS_BALANCE_OBJECTID -4ULL - /* holds quota configuration and tracking */ #define BTRFS_QUOTA_TREE_OBJECTID 8ULL +/* for storing balance parameters in the root tree */ +#define BTRFS_BALANCE_OBJECTID -4ULL + /* orhpan objectid for tracking unlinked/truncated files */ #define BTRFS_ORPHAN_OBJECTID -5ULL diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 4e9ebe1..72b1727 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -152,7 +152,7 @@ static struct btrfs_lockdep_keyset { { .id = BTRFS_DEV_TREE_OBJECTID, .name_stem = "dev" }, { .id = BTRFS_FS_TREE_OBJECTID, .name_stem = "fs" }, { .id = BTRFS_CSUM_TREE_OBJECTID, .name_stem = "csum" }, - { .id = BTRFS_ORPHAN_OBJECTID, .name_stem = "orphan" }, + { .id = BTRFS_QUOTA_TREE_OBJECTID, .name_stem = "quota" }, { .id = BTRFS_TREE_LOG_OBJECTID, .name_stem = "log" }, { .id = BTRFS_TREE_RELOC_OBJECTID, .name_stem = "treloc" }, { .id = BTRFS_DATA_RELOC_TREE_OBJECTID, .name_stem = "dreloc" }, -- cgit v0.10.2 From a52f4cd2b1a863a42c1cb268b1cddad451cdfede Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Wed, 1 May 2013 16:23:41 +0000 Subject: Btrfs: fix off-by-one in fiemap lock_extent/unlock_extent expect an exclusive end. Tested-by: David Sterba Signed-off-by: Liu Bo Signed-off-by: Josef Bacik diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index d2ac518..3e6e410 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -3989,7 +3989,7 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, last_for_get_extent = isize; } - lock_extent_bits(&BTRFS_I(inode)->io_tree, start, start + len, 0, + lock_extent_bits(&BTRFS_I(inode)->io_tree, start, start + len - 1, 0, &cached_state); em = get_extent_skip_holes(inode, start, last_for_get_extent, @@ -4076,7 +4076,7 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, out_free: free_extent_map(em); out: - unlock_extent_cached(&BTRFS_I(inode)->io_tree, start, start + len, + unlock_extent_cached(&BTRFS_I(inode)->io_tree, start, start + len - 1, &cached_state, GFP_NOFS); return ret; } -- cgit v0.10.2 From 5a7e6bd809ca2f06bd669bd477ad3d6b48a3dd9f Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Mon, 13 May 2013 00:54:31 +0000 Subject: i2c: designware: add Intel BayTrail ACPI ID This is the same controller as on Intel Lynxpoint but the ACPI ID is different (8086F41). Add support for this. Signed-off-by: Mika Westerberg Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 8ec9133..35b70a1 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -69,6 +69,7 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev) static const struct acpi_device_id dw_i2c_acpi_match[] = { { "INT33C2", 0 }, { "INT33C3", 0 }, + { "80860F41", 0 }, { } }; MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match); -- cgit v0.10.2 From 53229345502bf3713cce220e849743f83065381d Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 15 May 2013 02:44:10 +0000 Subject: i2c: i801: Document feature bits in modinfo Duplicate the feature bits documentation in modinfo, as not every user will read the driver's source code or documentation file. Signed-off-by: Jean Delvare Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index e1cf2e0..3a6903f 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -231,7 +231,11 @@ static const char *i801_feature_names[] = { static unsigned int disable_features; module_param(disable_features, uint, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(disable_features, "Disable selected driver features"); +MODULE_PARM_DESC(disable_features, "Disable selected driver features:\n" + "\t\t 0x01 disable SMBus PEC\n" + "\t\t 0x02 disable the block buffer\n" + "\t\t 0x08 disable the I2C block read functionality\n" + "\t\t 0x10 don't use interrupts "); /* Make sure the SMBus host is ready to start transmitting. Return 0 if it is, -EBUSY if it is not. */ -- cgit v0.10.2 From d295a86eab200b3f0c513e78dbe1f189fd32d397 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 16 May 2013 10:30:59 +0000 Subject: i2c: mv64xxx: work around signals causing I2C transactions to be aborted Do not use interruptible waits in an I2C driver; if a process uses signals (eg, Xorg uses SIGALRM and SIGPIPE) then these signals can cause the I2C driver to abort a transaction in progress by another driver, which can cause that driver to fail. I2C drivers are not expected to abort transactions on signals. Signed-off-by: Russell King Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 3bbd65d..1a3abd6 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -252,7 +252,7 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data) writel(drv_data->cntl_bits, drv_data->reg_base + MV64XXX_I2C_REG_CONTROL); drv_data->block = 0; - wake_up_interruptible(&drv_data->waitq); + wake_up(&drv_data->waitq); break; case MV64XXX_I2C_ACTION_CONTINUE: @@ -300,7 +300,7 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data) writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP, drv_data->reg_base + MV64XXX_I2C_REG_CONTROL); drv_data->block = 0; - wake_up_interruptible(&drv_data->waitq); + wake_up(&drv_data->waitq); break; case MV64XXX_I2C_ACTION_INVALID: @@ -315,7 +315,7 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data) writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP, drv_data->reg_base + MV64XXX_I2C_REG_CONTROL); drv_data->block = 0; - wake_up_interruptible(&drv_data->waitq); + wake_up(&drv_data->waitq); break; } } @@ -381,7 +381,7 @@ mv64xxx_i2c_wait_for_completion(struct mv64xxx_i2c_data *drv_data) unsigned long flags; char abort = 0; - time_left = wait_event_interruptible_timeout(drv_data->waitq, + time_left = wait_event_timeout(drv_data->waitq, !drv_data->block, drv_data->adapter.timeout); spin_lock_irqsave(&drv_data->lock, flags); -- cgit v0.10.2 From e9b526fe704812364bca07edd15eadeba163ebfb Mon Sep 17 00:00:00 2001 From: Alexander Sverdlin Date: Fri, 17 May 2013 14:56:35 +0200 Subject: i2c: suppress lockdep warning on delete_device i2c: suppress lockdep warning on delete_device Since commit 846f99749ab68bbc7f75c74fec305de675b1a1bf the following lockdep warning is thrown in case i2c device is removed (via delete_device sysfs attribute) which contains subdevices (e.g. i2c multiplexer): ============================================= [ INFO: possible recursive locking detected ] 3.8.7-0-sampleversion-fct #8 Tainted: G O --------------------------------------------- bash/3743 is trying to acquire lock: (s_active#110){++++.+}, at: [] sysfs_hash_and_remove+0x58/0xc8 but task is already holding lock: (s_active#110){++++.+}, at: [] sysfs_write_file+0xc8/0x208 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(s_active#110); lock(s_active#110); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by bash/3743: #0: (&buffer->mutex){+.+.+.}, at: [] sysfs_write_file+0x4c/0x208 #1: (s_active#110){++++.+}, at: [] sysfs_write_file+0xc8/0x208 #2: (&adap->userspace_clients_lock/1){+.+.+.}, at: [] i2c_sysfs_delete_device+0x90/0x238 #3: (&__lockdep_no_validate__){......}, at: [] device_release_driver+0x24/0x48 stack backtrace: Call Trace: [] dump_stack+0x8/0x34 [] __lock_acquire+0x161c/0x2110 [] lock_acquire+0x4c/0x70 [] sysfs_addrm_finish+0x19c/0x1e0 [] sysfs_hash_and_remove+0x58/0xc8 [] sysfs_remove_group+0x64/0x148 [] device_remove_attrs+0x9c/0x1a8 [] device_del+0x104/0x1d8 [] device_unregister+0x28/0x70 [] i2c_del_adapter+0x1cc/0x328 [] i2c_del_mux_adapter+0x14/0x38 [] pca954x_remove+0x90/0xe0 [pca954x] [] i2c_device_remove+0x80/0xe8 [] __device_release_driver+0x74/0xf8 [] device_release_driver+0x2c/0x48 [] bus_remove_device+0x13c/0x1d8 [] device_del+0x10c/0x1d8 [] device_unregister+0x28/0x70 [] i2c_sysfs_delete_device+0x180/0x238 [] sysfs_write_file+0xe4/0x208 [] vfs_write+0xbc/0x160 [] SyS_write+0x54/0xd8 [] handle_sys64+0x44/0x64 The problem is already known for USB and PCI subsystems. The reason is that delete_device attribute is defined statically in i2c-core.c and used for all devices in i2c subsystem. Discussion of original USB problem: http://lkml.indiana.edu/hypermail/linux/kernel/1204.3/01160.html Commit 356c05d58af05d582e634b54b40050c73609617b introduced new macro to suppress lockdep warnings for this special case and included workaround for USB code. LKML discussion of the workaround: http://lkml.indiana.edu/hypermail/linux/kernel/1205.1/03634.html As i2c case is in principle the same, the same workaround could be used here. Signed-off-by: Alexander Sverdlin Acked-by: Alan Stern Cc: Eric W. Biederman Cc: Tejun Heo Cc: Peter Zijlstra Cc: Greg Kroah-Hartman Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 6b63cc7..48e31ed 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -892,7 +892,8 @@ i2c_sysfs_delete_device(struct device *dev, struct device_attribute *attr, } static DEVICE_ATTR(new_device, S_IWUSR, NULL, i2c_sysfs_new_device); -static DEVICE_ATTR(delete_device, S_IWUSR, NULL, i2c_sysfs_delete_device); +static DEVICE_ATTR_IGNORE_LOCKDEP(delete_device, S_IWUSR, NULL, + i2c_sysfs_delete_device); static struct attribute *i2c_adapter_attrs[] = { &dev_attr_name.attr, -- cgit v0.10.2 From 642f2ecc092f4d2d5a9b7219090531508017c324 Mon Sep 17 00:00:00 2001 From: Matthijs Kooijman Date: Fri, 17 May 2013 10:52:55 +0200 Subject: staging: dwc2: Fix dma-enabled platform devices using a default dma_mask Platform devices added through OF usually do not have any dma_mask pointer set. If the hardware advertises DMA support, the driver will expect DMA buffers to be passed in, but the USB core will not do this due to lack of a dma mask, breaking all connectiviy. To fix this, set a default dma_mask by pointing it at the coherent_dma_mask and set their value to a 32 bit mask. This still allows any platform code to set any more specific mask if needed, but makes the driver work for most dma-enabled hardware. It would be great if this patch could be included in 3.10, since it is needed to make the dwc2 driver work on the ralink rt3052 target. Before, the plan was to set up the dma mask in MIPS platform code, but because of a similar change in ehci and the uglyness of the code for that, the plan for that infrastructure was dropped. This patch makes the setting of the dma_mask happen in the same way as the patch Stephen Warren (set device dma_mask without reference to global data). Signed-off-by: Matthijs Kooijman Acked-by: Paul Zimmerman Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/dwc2/platform.c b/drivers/staging/dwc2/platform.c index 1f3d581..afc515b 100644 --- a/drivers/staging/dwc2/platform.c +++ b/drivers/staging/dwc2/platform.c @@ -95,6 +95,14 @@ static int dwc2_driver_probe(struct platform_device *dev) hsotg->dev = &dev->dev; + /* + * Use reasonable defaults so platforms don't have to provide these. + */ + if (!dev->dev.dma_mask) + dev->dev.dma_mask = &dev->dev.coherent_dma_mask; + if (!dev->dev.coherent_dma_mask) + dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + irq = platform_get_irq(dev, 0); if (irq < 0) { dev_err(&dev->dev, "missing IRQ resource\n"); -- cgit v0.10.2 From e5f5e380e0f3bb11f04ca5bc66a551e58e0ad26e Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 16 May 2013 22:25:34 +0000 Subject: gianfar: add missing iounmap() on error in gianfar_ptp_probe() Add the missing iounmap() before return from gianfar_ptp_probe() in the error handling case. Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/gianfar_ptp.c b/drivers/net/ethernet/freescale/gianfar_ptp.c index 576e4b8..083ea2b 100644 --- a/drivers/net/ethernet/freescale/gianfar_ptp.c +++ b/drivers/net/ethernet/freescale/gianfar_ptp.c @@ -524,6 +524,7 @@ static int gianfar_ptp_probe(struct platform_device *dev) return 0; no_clock: + iounmap(etsects->regs); no_ioremap: release_resource(etsects->rsrc); no_resource: -- cgit v0.10.2 From 03b71c6ca6286625d8f1ed44aabab9b5bf5dac10 Mon Sep 17 00:00:00 2001 From: Gabriel de Perthuis Date: Mon, 6 May 2013 17:40:18 +0000 Subject: btrfs: don't stop searching after encountering the wrong item The search ioctl skips items that are too large for a result buffer, but inline items of a certain size occuring before any search result is found would trigger an overflow and stop the search entirely. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=57641 Cc: stable@vger.kernel.org Signed-off-by: Gabriel de Perthuis Signed-off-by: Josef Bacik diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 0de4a2f..0f81d67 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1801,7 +1801,11 @@ static noinline int copy_to_sk(struct btrfs_root *root, item_off = btrfs_item_ptr_offset(leaf, i); item_len = btrfs_item_size_nr(leaf, i); - if (item_len > BTRFS_SEARCH_ARGS_BUFSIZE) + btrfs_item_key_to_cpu(leaf, key, i); + if (!key_in_sk(key, sk)) + continue; + + if (sizeof(sh) + item_len > BTRFS_SEARCH_ARGS_BUFSIZE) item_len = 0; if (sizeof(sh) + item_len + *sk_offset > @@ -1810,10 +1814,6 @@ static noinline int copy_to_sk(struct btrfs_root *root, goto overflow; } - btrfs_item_key_to_cpu(leaf, key, i); - if (!key_in_sk(key, sk)) - continue; - sh.objectid = key->objectid; sh.offset = key->offset; sh.type = key->type; -- cgit v0.10.2 From 69a85bd87cc81bcbd36730d4a1214c12fdb8a548 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 8 May 2013 13:30:11 -0400 Subject: Btrfs: don't null pointer deref on abort I'm sorry, theres no excuse for this sort of work. We need to use root->leafsize since eb may be NULL. Thanks, Signed-off-by: Josef Bacik diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 72b1727..e8b29da 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -3808,7 +3808,7 @@ static int btrfs_destroy_marked_extents(struct btrfs_root *root, while (start <= end) { eb = btrfs_find_tree_block(root, start, root->leafsize); - start += eb->len; + start += root->leafsize; if (!eb) continue; wait_on_extent_buffer_writeback(eb); -- cgit v0.10.2 From 73e1e61fb85ab206854b6d87ff31733628bb8d72 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 8 May 2013 16:44:57 -0400 Subject: Btrfs: remove warn on in free space cache writeout This catches block groups that are too large to properly cache. We deal with this case fine, so the warning just confuses users. Remove the warning. Thanks, Signed-off-by: Josef Bacik diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index ecca6c7..6a8bb9c 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -920,10 +920,8 @@ static int __btrfs_write_out_cache(struct btrfs_root *root, struct inode *inode, /* Make sure we can fit our crcs into the first page */ if (io_ctl.check_crcs && - (io_ctl.num_pages * sizeof(u32)) >= PAGE_CACHE_SIZE) { - WARN_ON(1); + (io_ctl.num_pages * sizeof(u32)) >= PAGE_CACHE_SIZE) goto out_nospc; - } io_ctl_set_generation(&io_ctl, trans->transid); -- cgit v0.10.2 From b1c79e0947e0c190f865e2eb7b84a0fea0021cec Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Thu, 9 May 2013 13:49:30 -0400 Subject: Btrfs: handle running extent ops with skinny metadata Chris hit a bug where we weren't finding extent records when running extent ops. This is because we use the delayed_ref_head when running the extent op, which means we can't use the ->type checks to see if we are metadata. We also lose the level of the metadata we are working on. So to fix this we can just check the ->is_data section of the extent_op, and we can store the level of the buffer we were modifying in the extent_op. Thanks, Signed-off-by: Josef Bacik diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index de6de8e..02fae7f 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -951,10 +951,12 @@ static noinline int update_ref_for_cow(struct btrfs_trans_handle *trans, BUG_ON(ret); /* -ENOMEM */ } if (new_flags != 0) { + int level = btrfs_header_level(buf); + ret = btrfs_set_disk_extent_flags(trans, root, buf->start, buf->len, - new_flags, 0); + new_flags, level, 0); if (ret) return ret; } diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 2720d55..d6dd49b 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -3075,7 +3075,7 @@ int btrfs_dec_ref(struct btrfs_trans_handle *trans, struct btrfs_root *root, int btrfs_set_disk_extent_flags(struct btrfs_trans_handle *trans, struct btrfs_root *root, u64 bytenr, u64 num_bytes, u64 flags, - int is_data); + int level, int is_data); int btrfs_free_extent(struct btrfs_trans_handle *trans, struct btrfs_root *root, u64 bytenr, u64 num_bytes, u64 parent, u64 root_objectid, diff --git a/fs/btrfs/delayed-ref.h b/fs/btrfs/delayed-ref.h index f75fcaf..70b962c 100644 --- a/fs/btrfs/delayed-ref.h +++ b/fs/btrfs/delayed-ref.h @@ -60,6 +60,7 @@ struct btrfs_delayed_ref_node { struct btrfs_delayed_extent_op { struct btrfs_disk_key key; u64 flags_to_set; + int level; unsigned int update_key:1; unsigned int update_flags:1; unsigned int is_data:1; diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 2305b5c..c4c94b3 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -2070,8 +2070,7 @@ static int run_delayed_extent_op(struct btrfs_trans_handle *trans, u32 item_size; int ret; int err = 0; - int metadata = (node->type == BTRFS_TREE_BLOCK_REF_KEY || - node->type == BTRFS_SHARED_BLOCK_REF_KEY); + int metadata = !extent_op->is_data; if (trans->aborted) return 0; @@ -2086,11 +2085,8 @@ static int run_delayed_extent_op(struct btrfs_trans_handle *trans, key.objectid = node->bytenr; if (metadata) { - struct btrfs_delayed_tree_ref *tree_ref; - - tree_ref = btrfs_delayed_node_to_tree_ref(node); key.type = BTRFS_METADATA_ITEM_KEY; - key.offset = tree_ref->level; + key.offset = extent_op->level; } else { key.type = BTRFS_EXTENT_ITEM_KEY; key.offset = node->num_bytes; @@ -2719,7 +2715,7 @@ out: int btrfs_set_disk_extent_flags(struct btrfs_trans_handle *trans, struct btrfs_root *root, u64 bytenr, u64 num_bytes, u64 flags, - int is_data) + int level, int is_data) { struct btrfs_delayed_extent_op *extent_op; int ret; @@ -2732,6 +2728,7 @@ int btrfs_set_disk_extent_flags(struct btrfs_trans_handle *trans, extent_op->update_flags = 1; extent_op->update_key = 0; extent_op->is_data = is_data ? 1 : 0; + extent_op->level = level; ret = btrfs_add_delayed_extent_op(root->fs_info, trans, bytenr, num_bytes, extent_op); @@ -6763,6 +6760,7 @@ struct extent_buffer *btrfs_alloc_free_block(struct btrfs_trans_handle *trans, extent_op->update_key = 1; extent_op->update_flags = 1; extent_op->is_data = 0; + extent_op->level = level; ret = btrfs_add_delayed_tree_ref(root->fs_info, trans, ins.objectid, @@ -6934,7 +6932,8 @@ static noinline int walk_down_proc(struct btrfs_trans_handle *trans, ret = btrfs_dec_ref(trans, root, eb, 0, wc->for_reloc); BUG_ON(ret); /* -ENOMEM */ ret = btrfs_set_disk_extent_flags(trans, root, eb->start, - eb->len, flag, 0); + eb->len, flag, + btrfs_header_level(eb), 0); BUG_ON(ret); /* -ENOMEM */ wc->flags[level] |= flag; } -- cgit v0.10.2 From 49688107527a24b0ed3780576257a1225902180b Mon Sep 17 00:00:00 2001 From: Stefan Behrens Date: Tue, 7 May 2013 17:28:03 +0000 Subject: Btrfs: don't allow device replace on RAID5/RAID6 This is not yet supported and causes crashes. One sad user reported that it destroyed his filesystem. One failure is in __btrfs_map_block+0xc1f calling kmalloc(0). 0x5f21f is in __btrfs_map_block (fs/btrfs/volumes.c:4923). 4918 num_stripes = map->num_stripes; 4919 max_errors = nr_parity_stripes(map); 4920 4921 raid_map = kmalloc(sizeof(u64) * num_stripes, 4922 GFP_NOFS); 4923 if (!raid_map) { 4924 ret = -ENOMEM; 4925 goto out; 4926 } 4927 There might be more issues. Until this is really tested, don't allow users to start the procedure on RAID5/RAID6 filesystems. Signed-off-by: Stefan Behrens Signed-off-by: Josef Bacik diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c index 7ba7b39..65241f3 100644 --- a/fs/btrfs/dev-replace.c +++ b/fs/btrfs/dev-replace.c @@ -313,6 +313,11 @@ int btrfs_dev_replace_start(struct btrfs_root *root, struct btrfs_device *tgt_device = NULL; struct btrfs_device *src_device = NULL; + if (btrfs_fs_incompat(fs_info, RAID56)) { + pr_warn("btrfs: dev_replace cannot yet handle RAID5/RAID6\n"); + return -EINVAL; + } + switch (args->start.cont_reading_from_srcdev_mode) { case BTRFS_IOCTL_DEV_REPLACE_CONT_READING_FROM_SRCDEV_MODE_ALWAYS: case BTRFS_IOCTL_DEV_REPLACE_CONT_READING_FROM_SRCDEV_MODE_AVOID: -- cgit v0.10.2 From c16c2e2e51c2f0951fffa73c343b8fcb641108ba Mon Sep 17 00:00:00 2001 From: Wang Shilong Date: Wed, 8 May 2013 08:10:25 +0000 Subject: Btrfs: fix possible memory leak in the find_parent_nodes() In the find_parent_nodes(), if read_tree_block() fails, we can not return directly, we should free some allocated memory otherwise memory leak happens. Signed-off-by: Wang Shilong Signed-off-by: Josef Bacik diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c index b4fb415..290e347 100644 --- a/fs/btrfs/backref.c +++ b/fs/btrfs/backref.c @@ -918,7 +918,8 @@ again: ref->parent, bsz, 0); if (!eb || !extent_buffer_uptodate(eb)) { free_extent_buffer(eb); - return -EIO; + ret = -EIO; + goto out; } ret = find_extent_in_eb(eb, bytenr, *extent_item_pos, &eie); -- cgit v0.10.2 From 379cde741b220091d2124fb500b178b90ad7f460 Mon Sep 17 00:00:00 2001 From: Stefan Behrens Date: Wed, 8 May 2013 08:56:09 +0000 Subject: Btrfs: fix possible memory leak in replace_path() In replace_path(), if read_tree_block() fails, we cannot return directly, we should free some allocated memory otherwise memory leak happens. Similar to Wang's "Btrfs: fix possible memory leak in the find_parent_nodes()" patch, the current commit fixes an issue that is related to the "Btrfs: fix all callers of read_tree_block" commit. Signed-off-by: Stefan Behrens Signed-off-by: Josef Bacik diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index 704a1b8..5c5b8bb 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -1773,7 +1773,7 @@ again: if (!eb || !extent_buffer_uptodate(eb)) { ret = (!eb) ? -ENOMEM : -EIO; free_extent_buffer(eb); - return ret; + break; } btrfs_tree_lock(eb); if (cow) { -- cgit v0.10.2 From 8250dabedb633e162bce89f2aacf5e65fa9e6464 Mon Sep 17 00:00:00 2001 From: Andreas Philipp Date: Sat, 11 May 2013 11:13:03 +0000 Subject: Correct allowed raid levels on balance. Raid5 with 3 devices is well defined while the old logic allowed raid5 only with a minimum of 4 devices when converting the block group profile via btrfs balance. Creating a raid5 with just three devices using mkfs.btrfs worked always as expected. This is now fixed and the whole logic is rewritten. Signed-off-by: Andreas Philipp Signed-off-by: Josef Bacik diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index a191bac..062e930 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -3120,14 +3120,13 @@ int btrfs_balance(struct btrfs_balance_control *bctl, allowed = BTRFS_AVAIL_ALLOC_BIT_SINGLE; if (num_devices == 1) allowed |= BTRFS_BLOCK_GROUP_DUP; - else if (num_devices < 4) + else if (num_devices > 1) allowed |= (BTRFS_BLOCK_GROUP_RAID0 | BTRFS_BLOCK_GROUP_RAID1); - else - allowed |= (BTRFS_BLOCK_GROUP_RAID0 | BTRFS_BLOCK_GROUP_RAID1 | - BTRFS_BLOCK_GROUP_RAID10 | - BTRFS_BLOCK_GROUP_RAID5 | - BTRFS_BLOCK_GROUP_RAID6); - + if (num_devices > 2) + allowed |= BTRFS_BLOCK_GROUP_RAID5; + if (num_devices > 3) + allowed |= (BTRFS_BLOCK_GROUP_RAID10 | + BTRFS_BLOCK_GROUP_RAID6); if ((bctl->data.flags & BTRFS_BALANCE_ARGS_CONVERT) && (!alloc_profile_is_valid(bctl->data.target, 1) || (bctl->data.target & ~allowed))) { -- cgit v0.10.2 From 7cfa9e51d2948ae90e7599cc114dcce2c7c2b1fc Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Mon, 13 May 2013 13:55:08 +0000 Subject: Btrfs: don't abort the current transaction if there is no enough space for inode cache The filesystem with inode cache was forced to be read-only when we umounted it. Steps to reproduce: # mkfs.btrfs -f ${DEV} # mount -o inode_cache ${DEV} ${MNT} # dd if=/dev/zero of=${MNT}/file1 bs=1M count=8192 # btrfs fi syn ${MNT} # dd if=${MNT}/file1 of=/dev/null bs=1M # rm -f ${MNT}/file1 # btrfs fi syn ${MNT} # umount ${MNT} It is because there was no enough space to do inode cache truncation, and then we aborted the current transaction. But no space error is not a serious problem when we write out the inode cache, and it is safe that we just skip this step if we meet this problem. So we need not abort the current transaction. Reported-by: Tsutomu Itoh Signed-off-by: Miao Xie Tested-by: Tsutomu Itoh Signed-off-by: Josef Bacik diff --git a/fs/btrfs/inode-map.c b/fs/btrfs/inode-map.c index d26f67a..9818d4a 100644 --- a/fs/btrfs/inode-map.c +++ b/fs/btrfs/inode-map.c @@ -468,7 +468,8 @@ again: if (i_size_read(inode) > 0) { ret = btrfs_truncate_free_space_cache(root, trans, path, inode); if (ret) { - btrfs_abort_transaction(trans, root, ret); + if (ret != -ENOSPC) + btrfs_abort_transaction(trans, root, ret); goto out_put; } } -- cgit v0.10.2 From 7b61cd92242542944fc27024900c495a6a7b3396 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Mon, 13 May 2013 13:55:09 +0000 Subject: Btrfs: don't use global block reservation for inode cache truncation It is very likely that there are lots of subvolumes/snapshots in the filesystem, so if we use global block reservation to do inode cache truncation, we may hog all the free space that is reserved in global rsv. So it is better that we do the free space reservation for inode cache truncation by ourselves. Cc: Tsutomu Itoh Signed-off-by: Miao Xie Signed-off-by: Josef Bacik diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index c4c94b3..162a66b 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -3106,6 +3106,11 @@ again: WARN_ON(ret); if (i_size_read(inode) > 0) { + ret = btrfs_check_trunc_cache_free_space(root, + &root->fs_info->global_block_rsv); + if (ret) + goto out_put; + ret = btrfs_truncate_free_space_cache(root, trans, path, inode); if (ret) diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 6a8bb9c..e530096 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -197,30 +197,32 @@ int create_free_space_inode(struct btrfs_root *root, block_group->key.objectid); } -int btrfs_truncate_free_space_cache(struct btrfs_root *root, - struct btrfs_trans_handle *trans, - struct btrfs_path *path, - struct inode *inode) +int btrfs_check_trunc_cache_free_space(struct btrfs_root *root, + struct btrfs_block_rsv *rsv) { - struct btrfs_block_rsv *rsv; u64 needed_bytes; - loff_t oldsize; - int ret = 0; - - rsv = trans->block_rsv; - trans->block_rsv = &root->fs_info->global_block_rsv; + int ret; /* 1 for slack space, 1 for updating the inode */ needed_bytes = btrfs_calc_trunc_metadata_size(root, 1) + btrfs_calc_trans_metadata_size(root, 1); - spin_lock(&trans->block_rsv->lock); - if (trans->block_rsv->reserved < needed_bytes) { - spin_unlock(&trans->block_rsv->lock); - trans->block_rsv = rsv; - return -ENOSPC; - } - spin_unlock(&trans->block_rsv->lock); + spin_lock(&rsv->lock); + if (rsv->reserved < needed_bytes) + ret = -ENOSPC; + else + ret = 0; + spin_unlock(&rsv->lock); + return 0; +} + +int btrfs_truncate_free_space_cache(struct btrfs_root *root, + struct btrfs_trans_handle *trans, + struct btrfs_path *path, + struct inode *inode) +{ + loff_t oldsize; + int ret = 0; oldsize = i_size_read(inode); btrfs_i_size_write(inode, 0); @@ -232,9 +234,7 @@ int btrfs_truncate_free_space_cache(struct btrfs_root *root, */ ret = btrfs_truncate_inode_items(trans, root, inode, 0, BTRFS_EXTENT_DATA_KEY); - if (ret) { - trans->block_rsv = rsv; btrfs_abort_transaction(trans, root, ret); return ret; } @@ -242,7 +242,6 @@ int btrfs_truncate_free_space_cache(struct btrfs_root *root, ret = btrfs_update_inode(trans, root, inode); if (ret) btrfs_abort_transaction(trans, root, ret); - trans->block_rsv = rsv; return ret; } diff --git a/fs/btrfs/free-space-cache.h b/fs/btrfs/free-space-cache.h index 4dc17d8..8b7f19f 100644 --- a/fs/btrfs/free-space-cache.h +++ b/fs/btrfs/free-space-cache.h @@ -54,6 +54,8 @@ int create_free_space_inode(struct btrfs_root *root, struct btrfs_block_group_cache *block_group, struct btrfs_path *path); +int btrfs_check_trunc_cache_free_space(struct btrfs_root *root, + struct btrfs_block_rsv *rsv); int btrfs_truncate_free_space_cache(struct btrfs_root *root, struct btrfs_trans_handle *trans, struct btrfs_path *path, diff --git a/fs/btrfs/inode-map.c b/fs/btrfs/inode-map.c index 9818d4a..2c66ddb 100644 --- a/fs/btrfs/inode-map.c +++ b/fs/btrfs/inode-map.c @@ -429,11 +429,12 @@ int btrfs_save_ino_cache(struct btrfs_root *root, num_bytes = trans->bytes_reserved; /* * 1 item for inode item insertion if need - * 3 items for inode item update (in the worst case) + * 4 items for inode item update (in the worst case) + * 1 items for slack space if we need do truncation * 1 item for free space object * 3 items for pre-allocation */ - trans->bytes_reserved = btrfs_calc_trans_metadata_size(root, 8); + trans->bytes_reserved = btrfs_calc_trans_metadata_size(root, 10); ret = btrfs_block_rsv_add(root, trans->block_rsv, trans->bytes_reserved, BTRFS_RESERVE_NO_FLUSH); diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index 5c5b8bb..395b820 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -3350,6 +3350,11 @@ static int delete_block_group_cache(struct btrfs_fs_info *fs_info, } truncate: + ret = btrfs_check_trunc_cache_free_space(root, + &fs_info->global_block_rsv); + if (ret) + goto out; + path = btrfs_alloc_path(); if (!path) { ret = -ENOMEM; -- cgit v0.10.2 From b586b32374909863311b7c916c7c0c709141e35a Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Mon, 13 May 2013 13:55:10 +0000 Subject: Btrfs: optimize the error handle of use_block_rsv() cc: Tsutomu Itoh Signed-off-by: Miao Xie Signed-off-by: Josef Bacik diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 162a66b..5e2c0bf 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -6656,48 +6656,39 @@ use_block_rsv(struct btrfs_trans_handle *trans, block_rsv = get_block_rsv(trans, root); - if (block_rsv->size == 0) { - ret = reserve_metadata_bytes(root, block_rsv, blocksize, - BTRFS_RESERVE_NO_FLUSH); - /* - * If we couldn't reserve metadata bytes try and use some from - * the global reserve. - */ - if (ret && block_rsv != global_rsv) { - ret = block_rsv_use_bytes(global_rsv, blocksize); - if (!ret) - return global_rsv; - return ERR_PTR(ret); - } else if (ret) { - return ERR_PTR(ret); - } - return block_rsv; - } + if (unlikely(block_rsv->size == 0)) + goto try_reserve; ret = block_rsv_use_bytes(block_rsv, blocksize); if (!ret) return block_rsv; - if (ret && !block_rsv->failfast) { - if (btrfs_test_opt(root, ENOSPC_DEBUG)) { - static DEFINE_RATELIMIT_STATE(_rs, - DEFAULT_RATELIMIT_INTERVAL * 10, - /*DEFAULT_RATELIMIT_BURST*/ 1); - if (__ratelimit(&_rs)) - WARN(1, KERN_DEBUG - "btrfs: block rsv returned %d\n", ret); - } - ret = reserve_metadata_bytes(root, block_rsv, blocksize, - BTRFS_RESERVE_NO_FLUSH); - if (!ret) { - return block_rsv; - } else if (ret && block_rsv != global_rsv) { - ret = block_rsv_use_bytes(global_rsv, blocksize); - if (!ret) - return global_rsv; - } - } - return ERR_PTR(-ENOSPC); + if (block_rsv->failfast) + return ERR_PTR(ret); + + if (btrfs_test_opt(root, ENOSPC_DEBUG)) { + static DEFINE_RATELIMIT_STATE(_rs, + DEFAULT_RATELIMIT_INTERVAL * 10, + /*DEFAULT_RATELIMIT_BURST*/ 1); + if (__ratelimit(&_rs)) + WARN(1, KERN_DEBUG + "btrfs: block rsv returned %d\n", ret); + } +try_reserve: + ret = reserve_metadata_bytes(root, block_rsv, blocksize, + BTRFS_RESERVE_NO_FLUSH); + if (!ret) + return block_rsv; + /* + * If we couldn't reserve metadata bytes try and use some from + * the global reserve. + */ + if (block_rsv->type != BTRFS_BLOCK_RSV_GLOBAL) { + ret = block_rsv_use_bytes(global_rsv, blocksize); + if (!ret) + return global_rsv; + } + return ERR_PTR(ret); } static void unuse_block_rsv(struct btrfs_fs_info *fs_info, -- cgit v0.10.2 From 5881cfc924c8143dbc3e1f343516fc6527eb8311 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Mon, 13 May 2013 13:55:11 +0000 Subject: Btrfs: don't steal the reserved space from the global reserve if their space type is different If the type of the space we need is different with the global reserve, we can not steal the space from the global reserve, because we can not allocate the space from the free space cache that the global reserve points to. Cc: Tsutomu Itoh Signed-off-by: Miao Xie Signed-off-by: Josef Bacik diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 5e2c0bf..54e63b2 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -6681,9 +6681,11 @@ try_reserve: return block_rsv; /* * If we couldn't reserve metadata bytes try and use some from - * the global reserve. + * the global reserve if its space type is the same as the global + * reservation. */ - if (block_rsv->type != BTRFS_BLOCK_RSV_GLOBAL) { + if (block_rsv->type != BTRFS_BLOCK_RSV_GLOBAL && + block_rsv->space_info == global_rsv->space_info) { ret = block_rsv_use_bytes(global_rsv, blocksize); if (!ret) return global_rsv; -- cgit v0.10.2 From d88033dbf4c23279b012725876f1e164e09644ff Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Mon, 13 May 2013 13:55:12 +0000 Subject: Btrfs: update the global reserve if it is empty Before applying this patch, we reserved the space for the global reserve by the minimum unit if we found it is empty, it was unreasonable and inefficient, because if the global reserve space was depleted, it implied that the size of the global reserve was too small. In this case, we shoud update the global reserve and fill it. Cc: Tsutomu Itoh Signed-off-by: Miao Xie Signed-off-by: Josef Bacik diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 54e63b2..42f5e61 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -6653,12 +6653,13 @@ use_block_rsv(struct btrfs_trans_handle *trans, struct btrfs_block_rsv *block_rsv; struct btrfs_block_rsv *global_rsv = &root->fs_info->global_block_rsv; int ret; + bool global_updated = false; block_rsv = get_block_rsv(trans, root); if (unlikely(block_rsv->size == 0)) goto try_reserve; - +again: ret = block_rsv_use_bytes(block_rsv, blocksize); if (!ret) return block_rsv; @@ -6666,6 +6667,12 @@ use_block_rsv(struct btrfs_trans_handle *trans, if (block_rsv->failfast) return ERR_PTR(ret); + if (block_rsv->type == BTRFS_BLOCK_RSV_GLOBAL && !global_updated) { + global_updated = true; + update_global_block_rsv(root->fs_info); + goto again; + } + if (btrfs_test_opt(root, ENOSPC_DEBUG)) { static DEFINE_RATELIMIT_STATE(_rs, DEFAULT_RATELIMIT_INTERVAL * 10, -- cgit v0.10.2 From b9aa55bed1c1a3a329da31884b643c62d57ebb21 Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Tue, 14 May 2013 02:12:15 +0000 Subject: Btrfs: return errno if possible when we fail to allocate memory We need to set return value explicitly, otherwise we'll lose the error value. Signed-off-by: Liu Bo Signed-off-by: Josef Bacik diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 1669c3b..99a9c25 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -714,8 +714,10 @@ retry: async_extent->ram_size - 1, 0); em = alloc_extent_map(); - if (!em) + if (!em) { + ret = -ENOMEM; goto out_free_reserve; + } em->start = async_extent->start; em->len = async_extent->ram_size; em->orig_start = em->start; @@ -922,8 +924,10 @@ static noinline int __cow_file_range(struct btrfs_trans_handle *trans, } em = alloc_extent_map(); - if (!em) + if (!em) { + ret = -ENOMEM; goto out_reserve; + } em->start = start; em->orig_start = em->start; ram_size = ins.offset; -- cgit v0.10.2 From 89042e5ad23d50449691141334f30d53d6271266 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Wed, 15 May 2013 07:48:15 +0000 Subject: Btrfs: fix accessing a freed tree root inode_tree_del() will move the tree root into the dead root list, and then the tree will be destroyed by the cleaner. So if we remove the delayed node which is cached in the inode after inode_tree_del(), we may access a freed tree root. Fix it. Signed-off-by: Miao Xie Signed-off-by: Josef Bacik diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 99a9c25..790eceb 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -4727,6 +4727,7 @@ void btrfs_evict_inode(struct inode *inode) btrfs_end_transaction(trans, root); btrfs_btree_balance_dirty(root); no_delete: + btrfs_remove_delayed_node(inode); clear_inode(inode); return; } @@ -7982,7 +7983,6 @@ void btrfs_destroy_inode(struct inode *inode) inode_tree_del(inode); btrfs_drop_extent_cache(inode, 0, (u64)-1, 0); free: - btrfs_remove_delayed_node(inode); call_rcu(&inode->i_rcu, btrfs_i_callback); } -- cgit v0.10.2 From e1409cef85894f96f4bddc6633d64d1c5275e2a3 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Wed, 15 May 2013 07:48:16 +0000 Subject: Btrfs: fix unprotected root node of the subvolume's inode rb-tree The root node of the rb-tree may be changed, so we should get it under the lock. Fix it. Signed-off-by: Miao Xie Signed-off-by: Josef Bacik diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 790eceb..19eef3e 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -4843,14 +4843,13 @@ static void inode_tree_add(struct inode *inode) struct rb_node **p; struct rb_node *parent; u64 ino = btrfs_ino(inode); -again: - p = &root->inode_tree.rb_node; - parent = NULL; if (inode_unhashed(inode)) return; - +again: + parent = NULL; spin_lock(&root->inode_lock); + p = &root->inode_tree.rb_node; while (*p) { parent = *p; entry = rb_entry(parent, struct btrfs_inode, rb_node); -- cgit v0.10.2 From 061594ef171a5ba52b5786688ae766907b0bda2b Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Wed, 15 May 2013 07:48:17 +0000 Subject: Btrfs: pause the space balance when remounting to R/O Signed-off-by: Miao Xie Signed-off-by: Josef Bacik diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index a4807ce..f0857e0 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -1263,6 +1263,7 @@ static int btrfs_remount(struct super_block *sb, int *flags, char *data) btrfs_dev_replace_suspend_for_unmount(fs_info); btrfs_scrub_cancel(fs_info); + btrfs_pause_balance(fs_info); ret = btrfs_commit_super(root); if (ret) -- cgit v0.10.2 From 314297c2a3fbcbda992507f70cd04cc82084e434 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Wed, 15 May 2013 07:48:18 +0000 Subject: Btrfs: remove BUG_ON() in btrfs_read_fs_tree_no_radix() We have checked if ->node is NULL or not, so it is unnecessary to use BUG_ON() to check again. Remove it. Signed-off-by: Miao Xie Signed-off-by: Josef Bacik diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index e8b29da..9b9f286 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1513,7 +1513,6 @@ struct btrfs_root *btrfs_read_fs_root_no_radix(struct btrfs_root *tree_root, } root->commit_root = btrfs_root_node(root); - BUG_ON(!root->node); /* -ENOMEM */ out: if (location->objectid != BTRFS_TREE_LOG_OBJECTID) { root->ref_cows = 1; -- cgit v0.10.2 From b216cbfb52c08300c203abf06ea9519d15d10045 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Wed, 15 May 2013 07:48:21 +0000 Subject: Btrfs: don't invoke btrfs_invalidate_inodes() in the spin lock context btrfs_invalidate_inodes() may sleep, so we should not invoke it in the spin lock context. Fix it. Signed-off-by: Miao Xie Signed-off-by: Josef Bacik diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 9b9f286..1b03f83 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -3658,8 +3658,11 @@ static void btrfs_destroy_ordered_operations(struct btrfs_transaction *t, ordered_operations); list_del_init(&btrfs_inode->ordered_operations); + spin_unlock(&root->fs_info->ordered_extent_lock); btrfs_invalidate_inodes(btrfs_inode->root); + + spin_lock(&root->fs_info->ordered_extent_lock); } spin_unlock(&root->fs_info->ordered_extent_lock); @@ -3781,8 +3784,11 @@ static void btrfs_destroy_delalloc_inodes(struct btrfs_root *root) list_del_init(&btrfs_inode->delalloc_inodes); clear_bit(BTRFS_INODE_IN_DELALLOC_LIST, &btrfs_inode->runtime_flags); + spin_unlock(&root->fs_info->delalloc_lock); btrfs_invalidate_inodes(btrfs_inode->root); + + spin_lock(&root->fs_info->delalloc_lock); } spin_unlock(&root->fs_info->delalloc_lock); -- cgit v0.10.2 From 17a5adccf3fd01added91f3bf9aa7ee9aa28843b Mon Sep 17 00:00:00 2001 From: Alexandre Oliva Date: Wed, 15 May 2013 11:38:55 -0400 Subject: btrfs: do away with non-whole_page extent I/O end_bio_extent_readpage computes whole_page based on bv_offset and bv_len, without taking into account that blk_update_request may modify them when some of the blocks to be read into a page produce a read error. This would cause the read to unlock only part of the file range associated with the page, which would in turn leave the entire page locked, which would not only keep the process blocked instead of returning -EIO to it, but also prevent any further access to the file. It turns out that btrfs always issues whole-page reads and writes. The special handling of non-whole_page appears to be a mistake or a left-over from a time when this wasn't the case. Indeed, end_bio_extent_writepage distinguished between whole_page and non-whole_page writes but behaved identically in both cases! I've replaced the whole_page computations with warnings, just to be sure that we're not issuing partial page reads or writes. The warnings should probably just go away some time. Signed-off-by: Alexandre Oliva Signed-off-by: Josef Bacik diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 3e6e410..ca4355d 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -1948,28 +1948,6 @@ static void check_page_uptodate(struct extent_io_tree *tree, struct page *page) } /* - * helper function to unlock a page if all the extents in the tree - * for that page are unlocked - */ -static void check_page_locked(struct extent_io_tree *tree, struct page *page) -{ - u64 start = page_offset(page); - u64 end = start + PAGE_CACHE_SIZE - 1; - if (!test_range_bit(tree, start, end, EXTENT_LOCKED, 0, NULL)) - unlock_page(page); -} - -/* - * helper function to end page writeback if all the extents - * in the tree for that page are done with writeback - */ -static void check_page_writeback(struct extent_io_tree *tree, - struct page *page) -{ - end_page_writeback(page); -} - -/* * When IO fails, either with EIO or csum verification fails, we * try other mirrors that might have a good copy of the data. This * io_failure_record is used to record state as we go through all the @@ -2398,19 +2376,24 @@ static void end_bio_extent_writepage(struct bio *bio, int err) struct extent_io_tree *tree; u64 start; u64 end; - int whole_page; do { struct page *page = bvec->bv_page; tree = &BTRFS_I(page->mapping->host)->io_tree; - start = page_offset(page) + bvec->bv_offset; - end = start + bvec->bv_len - 1; + /* We always issue full-page reads, but if some block + * in a page fails to read, blk_update_request() will + * advance bv_offset and adjust bv_len to compensate. + * Print a warning for nonzero offsets, and an error + * if they don't add up to a full page. */ + if (bvec->bv_offset || bvec->bv_len != PAGE_CACHE_SIZE) + printk("%s page write in btrfs with offset %u and length %u\n", + bvec->bv_offset + bvec->bv_len != PAGE_CACHE_SIZE + ? KERN_ERR "partial" : KERN_INFO "incomplete", + bvec->bv_offset, bvec->bv_len); - if (bvec->bv_offset == 0 && bvec->bv_len == PAGE_CACHE_SIZE) - whole_page = 1; - else - whole_page = 0; + start = page_offset(page); + end = start + bvec->bv_offset + bvec->bv_len - 1; if (--bvec >= bio->bi_io_vec) prefetchw(&bvec->bv_page->flags); @@ -2418,10 +2401,7 @@ static void end_bio_extent_writepage(struct bio *bio, int err) if (end_extent_writepage(page, err, start, end)) continue; - if (whole_page) - end_page_writeback(page); - else - check_page_writeback(tree, page); + end_page_writeback(page); } while (bvec >= bio->bi_io_vec); bio_put(bio); @@ -2446,7 +2426,6 @@ static void end_bio_extent_readpage(struct bio *bio, int err) struct extent_io_tree *tree; u64 start; u64 end; - int whole_page; int mirror; int ret; @@ -2463,13 +2442,19 @@ static void end_bio_extent_readpage(struct bio *bio, int err) (long int)bio->bi_bdev); tree = &BTRFS_I(page->mapping->host)->io_tree; - start = page_offset(page) + bvec->bv_offset; - end = start + bvec->bv_len - 1; + /* We always issue full-page reads, but if some block + * in a page fails to read, blk_update_request() will + * advance bv_offset and adjust bv_len to compensate. + * Print a warning for nonzero offsets, and an error + * if they don't add up to a full page. */ + if (bvec->bv_offset || bvec->bv_len != PAGE_CACHE_SIZE) + printk("%s page read in btrfs with offset %u and length %u\n", + bvec->bv_offset + bvec->bv_len != PAGE_CACHE_SIZE + ? KERN_ERR "partial" : KERN_INFO "incomplete", + bvec->bv_offset, bvec->bv_len); - if (bvec->bv_offset == 0 && bvec->bv_len == PAGE_CACHE_SIZE) - whole_page = 1; - else - whole_page = 0; + start = page_offset(page); + end = start + bvec->bv_offset + bvec->bv_len - 1; if (++bvec <= bvec_end) prefetchw(&bvec->bv_page->flags); @@ -2528,23 +2513,13 @@ static void end_bio_extent_readpage(struct bio *bio, int err) } unlock_extent_cached(tree, start, end, &cached, GFP_ATOMIC); - if (whole_page) { - if (uptodate) { - SetPageUptodate(page); - } else { - ClearPageUptodate(page); - SetPageError(page); - } - unlock_page(page); + if (uptodate) { + SetPageUptodate(page); } else { - if (uptodate) { - check_page_uptodate(tree, page); - } else { - ClearPageUptodate(page); - SetPageError(page); - } - check_page_locked(tree, page); + ClearPageUptodate(page); + SetPageError(page); } + unlock_page(page); } while (bvec <= bvec_end); bio_put(bio); -- cgit v0.10.2 From 3a6cad9009c85e29e83aafc8ac00b1dd5067fc5f Mon Sep 17 00:00:00 2001 From: Stefan Behrens Date: Thu, 16 May 2013 14:48:19 +0000 Subject: Btrfs: explicitly use global_block_rsv for quota_tree The quota_tree was set up to use the empty_block_rsv before which would be problematic when the filesystem is filled up and ENOSPC happens during internal operations while the quota tree is updated and COWed (when the btrfs_qgroup_info_item items) are written. In fact, use_block_rsv() which is used in btrfs_cow_block() falls back to the global_block_rsv in this case. But just in order to make it more clear what is happening, change it to explicitly use the global_block_rsv. Signed-off-by: Stefan Behrens Signed-off-by: Josef Bacik diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 42f5e61..df472ab 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -4564,6 +4564,8 @@ static void init_global_block_rsv(struct btrfs_fs_info *fs_info) fs_info->csum_root->block_rsv = &fs_info->global_block_rsv; fs_info->dev_root->block_rsv = &fs_info->global_block_rsv; fs_info->tree_root->block_rsv = &fs_info->global_block_rsv; + if (fs_info->quota_root) + fs_info->quota_root->block_rsv = &fs_info->global_block_rsv; fs_info->chunk_root->block_rsv = &fs_info->chunk_block_rsv; update_global_block_rsv(fs_info); -- cgit v0.10.2 From 655b09fe540b73edeaabfb4c2d700be51a1f8bce Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 17 May 2013 14:06:51 -0400 Subject: Btrfs: make sure roots are assigned before freeing their nodes If we fail to load the chunk tree we'll call free_root_pointers, except we may not have assigned the roots for the dev_root/extent_root/csum_root yet, so we could NULL pointer deref at this point. Just add checks to make sure these roots are set to keep us from panicing. Thanks, Signed-off-by: Josef Bacik diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 1b03f83..4bdb052 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1987,30 +1987,33 @@ static void free_root_pointers(struct btrfs_fs_info *info, int chunk_root) { free_extent_buffer(info->tree_root->node); free_extent_buffer(info->tree_root->commit_root); - free_extent_buffer(info->dev_root->node); - free_extent_buffer(info->dev_root->commit_root); - free_extent_buffer(info->extent_root->node); - free_extent_buffer(info->extent_root->commit_root); - free_extent_buffer(info->csum_root->node); - free_extent_buffer(info->csum_root->commit_root); - if (info->quota_root) { - free_extent_buffer(info->quota_root->node); - free_extent_buffer(info->quota_root->commit_root); - } - info->tree_root->node = NULL; info->tree_root->commit_root = NULL; - info->dev_root->node = NULL; - info->dev_root->commit_root = NULL; - info->extent_root->node = NULL; - info->extent_root->commit_root = NULL; - info->csum_root->node = NULL; - info->csum_root->commit_root = NULL; + + if (info->dev_root) { + free_extent_buffer(info->dev_root->node); + free_extent_buffer(info->dev_root->commit_root); + info->dev_root->node = NULL; + info->dev_root->commit_root = NULL; + } + if (info->extent_root) { + free_extent_buffer(info->extent_root->node); + free_extent_buffer(info->extent_root->commit_root); + info->extent_root->node = NULL; + info->extent_root->commit_root = NULL; + } + if (info->csum_root) { + free_extent_buffer(info->csum_root->node); + free_extent_buffer(info->csum_root->commit_root); + info->csum_root->node = NULL; + info->csum_root->commit_root = NULL; + } if (info->quota_root) { + free_extent_buffer(info->quota_root->node); + free_extent_buffer(info->quota_root->commit_root); info->quota_root->node = NULL; info->quota_root->commit_root = NULL; } - if (chunk_root) { free_extent_buffer(info->chunk_root->node); free_extent_buffer(info->chunk_root->commit_root); -- cgit v0.10.2 From 9be3395bcd4ad4af76476ac38152b4cafa6b6159 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Fri, 17 May 2013 18:30:14 -0400 Subject: Btrfs: use a btrfs bioset instead of abusing bio internals Btrfs has been pointer tagging bi_private and using bi_bdev to store the stripe index and mirror number of failed IOs. As bios bubble back up through the call chain, we use these to decide if and how to retry our IOs. They are also used to count IO failures on a per device basis. Recently a bio tracepoint was added lead to crashes because we were abusing bi_bdev. This commit adds a btrfs bioset, and creates explicit fields for the mirror number and stripe index. The plan is to extend this structure for all of the fields currently in struct btrfs_bio, which will mean one less kmalloc in our IO path. Signed-off-by: Chris Mason Reported-by: Tejun Heo diff --git a/fs/btrfs/check-integrity.c b/fs/btrfs/check-integrity.c index 18af6f4..1431a69 100644 --- a/fs/btrfs/check-integrity.c +++ b/fs/btrfs/check-integrity.c @@ -1700,7 +1700,7 @@ static int btrfsic_read_block(struct btrfsic_state *state, unsigned int j; DECLARE_COMPLETION_ONSTACK(complete); - bio = bio_alloc(GFP_NOFS, num_pages - i); + bio = btrfs_io_bio_alloc(GFP_NOFS, num_pages - i); if (!bio) { printk(KERN_INFO "btrfsic: bio_alloc() for %u pages failed!\n", diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 4e9ebe1..ca0ea99 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -3128,7 +3128,7 @@ static int write_dev_flush(struct btrfs_device *device, int wait) * caller */ device->flush_bio = NULL; - bio = bio_alloc(GFP_NOFS, 0); + bio = btrfs_io_bio_alloc(GFP_NOFS, 0); if (!bio) return -ENOMEM; diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index d2ac518..fe1d6c3 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -23,6 +23,7 @@ static struct kmem_cache *extent_state_cache; static struct kmem_cache *extent_buffer_cache; +static struct bio_set *btrfs_bioset; #ifdef CONFIG_BTRFS_DEBUG static LIST_HEAD(buffers); @@ -125,10 +126,20 @@ int __init extent_io_init(void) SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL); if (!extent_buffer_cache) goto free_state_cache; + + btrfs_bioset = bioset_create(BIO_POOL_SIZE, + offsetof(struct btrfs_io_bio, bio)); + if (!btrfs_bioset) + goto free_buffer_cache; return 0; +free_buffer_cache: + kmem_cache_destroy(extent_buffer_cache); + extent_buffer_cache = NULL; + free_state_cache: kmem_cache_destroy(extent_state_cache); + extent_state_cache = NULL; return -ENOMEM; } @@ -145,6 +156,8 @@ void extent_io_exit(void) kmem_cache_destroy(extent_state_cache); if (extent_buffer_cache) kmem_cache_destroy(extent_buffer_cache); + if (btrfs_bioset) + bioset_free(btrfs_bioset); } void extent_io_tree_init(struct extent_io_tree *tree, @@ -2046,7 +2059,7 @@ int repair_io_failure(struct btrfs_fs_info *fs_info, u64 start, if (btrfs_is_parity_mirror(map_tree, logical, length, mirror_num)) return 0; - bio = bio_alloc(GFP_NOFS, 1); + bio = btrfs_io_bio_alloc(GFP_NOFS, 1); if (!bio) return -EIO; bio->bi_private = &compl; @@ -2336,7 +2349,7 @@ static int bio_readpage_error(struct bio *failed_bio, struct page *page, return -EIO; } - bio = bio_alloc(GFP_NOFS, 1); + bio = btrfs_io_bio_alloc(GFP_NOFS, 1); if (!bio) { free_io_failure(inode, failrec, 0); return -EIO; @@ -2457,10 +2470,11 @@ static void end_bio_extent_readpage(struct bio *bio, int err) struct page *page = bvec->bv_page; struct extent_state *cached = NULL; struct extent_state *state; + struct btrfs_io_bio *io_bio = btrfs_io_bio(bio); pr_debug("end_bio_extent_readpage: bi_sector=%llu, err=%d, " - "mirror=%ld\n", (u64)bio->bi_sector, err, - (long int)bio->bi_bdev); + "mirror=%lu\n", (u64)bio->bi_sector, err, + io_bio->mirror_num); tree = &BTRFS_I(page->mapping->host)->io_tree; start = page_offset(page) + bvec->bv_offset; @@ -2485,7 +2499,7 @@ static void end_bio_extent_readpage(struct bio *bio, int err) } spin_unlock(&tree->lock); - mirror = (int)(unsigned long)bio->bi_bdev; + mirror = io_bio->mirror_num; if (uptodate && tree->ops && tree->ops->readpage_end_io_hook) { ret = tree->ops->readpage_end_io_hook(page, start, end, state, mirror); @@ -2550,17 +2564,23 @@ static void end_bio_extent_readpage(struct bio *bio, int err) bio_put(bio); } +/* + * this allocates from the btrfs_bioset. We're returning a bio right now + * but you can call btrfs_io_bio for the appropriate container_of magic + */ struct bio * btrfs_bio_alloc(struct block_device *bdev, u64 first_sector, int nr_vecs, gfp_t gfp_flags) { struct bio *bio; - bio = bio_alloc(gfp_flags, nr_vecs); + bio = bio_alloc_bioset(gfp_flags, nr_vecs, btrfs_bioset); if (bio == NULL && (current->flags & PF_MEMALLOC)) { - while (!bio && (nr_vecs /= 2)) - bio = bio_alloc(gfp_flags, nr_vecs); + while (!bio && (nr_vecs /= 2)) { + bio = bio_alloc_bioset(gfp_flags, + nr_vecs, btrfs_bioset); + } } if (bio) { @@ -2571,6 +2591,19 @@ btrfs_bio_alloc(struct block_device *bdev, u64 first_sector, int nr_vecs, return bio; } +struct bio *btrfs_bio_clone(struct bio *bio, gfp_t gfp_mask) +{ + return bio_clone_bioset(bio, gfp_mask, btrfs_bioset); +} + + +/* this also allocates from the btrfs_bioset */ +struct bio *btrfs_io_bio_alloc(gfp_t gfp_mask, unsigned int nr_iovecs) +{ + return bio_alloc_bioset(gfp_mask, nr_iovecs, btrfs_bioset); +} + + static int __must_check submit_one_bio(int rw, struct bio *bio, int mirror_num, unsigned long bio_flags) { diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h index a2c03a1..41fb81e 100644 --- a/fs/btrfs/extent_io.h +++ b/fs/btrfs/extent_io.h @@ -336,6 +336,8 @@ int extent_clear_unlock_delalloc(struct inode *inode, struct bio * btrfs_bio_alloc(struct block_device *bdev, u64 first_sector, int nr_vecs, gfp_t gfp_flags); +struct bio *btrfs_io_bio_alloc(gfp_t gfp_mask, unsigned int nr_iovecs); +struct bio *btrfs_bio_clone(struct bio *bio, gfp_t gfp_mask); struct btrfs_fs_info; diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 1669c3b..d59dddf 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -6927,7 +6927,11 @@ struct btrfs_dio_private { /* IO errors */ int errors; + /* orig_bio is our btrfs_io_bio */ struct bio *orig_bio; + + /* dio_bio came from fs/direct-io.c */ + struct bio *dio_bio; }; static void btrfs_endio_direct_read(struct bio *bio, int err) @@ -6937,6 +6941,7 @@ static void btrfs_endio_direct_read(struct bio *bio, int err) struct bio_vec *bvec = bio->bi_io_vec; struct inode *inode = dip->inode; struct btrfs_root *root = BTRFS_I(inode)->root; + struct bio *dio_bio; u64 start; start = dip->logical_offset; @@ -6976,14 +6981,15 @@ failed: unlock_extent(&BTRFS_I(inode)->io_tree, dip->logical_offset, dip->logical_offset + dip->bytes - 1); - bio->bi_private = dip->private; + dio_bio = dip->dio_bio; kfree(dip); /* If we had a csum failure make sure to clear the uptodate flag */ if (err) - clear_bit(BIO_UPTODATE, &bio->bi_flags); - dio_end_io(bio, err); + clear_bit(BIO_UPTODATE, &dio_bio->bi_flags); + dio_end_io(dio_bio, err); + bio_put(bio); } static void btrfs_endio_direct_write(struct bio *bio, int err) @@ -6994,6 +7000,7 @@ static void btrfs_endio_direct_write(struct bio *bio, int err) struct btrfs_ordered_extent *ordered = NULL; u64 ordered_offset = dip->logical_offset; u64 ordered_bytes = dip->bytes; + struct bio *dio_bio; int ret; if (err) @@ -7021,14 +7028,15 @@ out_test: goto again; } out_done: - bio->bi_private = dip->private; + dio_bio = dip->dio_bio; kfree(dip); /* If we had an error make sure to clear the uptodate flag */ if (err) - clear_bit(BIO_UPTODATE, &bio->bi_flags); - dio_end_io(bio, err); + clear_bit(BIO_UPTODATE, &dio_bio->bi_flags); + dio_end_io(dio_bio, err); + bio_put(bio); } static int __btrfs_submit_bio_start_direct_io(struct inode *inode, int rw, @@ -7064,10 +7072,10 @@ static void btrfs_end_dio_bio(struct bio *bio, int err) if (!atomic_dec_and_test(&dip->pending_bios)) goto out; - if (dip->errors) + if (dip->errors) { bio_io_error(dip->orig_bio); - else { - set_bit(BIO_UPTODATE, &dip->orig_bio->bi_flags); + } else { + set_bit(BIO_UPTODATE, &dip->dio_bio->bi_flags); bio_endio(dip->orig_bio, 0); } out: @@ -7242,25 +7250,34 @@ out_err: return 0; } -static void btrfs_submit_direct(int rw, struct bio *bio, struct inode *inode, - loff_t file_offset) +static void btrfs_submit_direct(int rw, struct bio *dio_bio, + struct inode *inode, loff_t file_offset) { struct btrfs_root *root = BTRFS_I(inode)->root; struct btrfs_dio_private *dip; - struct bio_vec *bvec = bio->bi_io_vec; + struct bio_vec *bvec = dio_bio->bi_io_vec; + struct bio *io_bio; int skip_sum; int write = rw & REQ_WRITE; int ret = 0; skip_sum = BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM; + io_bio = btrfs_bio_clone(dio_bio, GFP_NOFS); + + if (!io_bio) { + ret = -ENOMEM; + goto free_ordered; + } + dip = kmalloc(sizeof(*dip), GFP_NOFS); if (!dip) { ret = -ENOMEM; - goto free_ordered; + goto free_io_bio; } - dip->private = bio->bi_private; + dip->private = dio_bio->bi_private; + io_bio->bi_private = dio_bio->bi_private; dip->inode = inode; dip->logical_offset = file_offset; @@ -7268,22 +7285,27 @@ static void btrfs_submit_direct(int rw, struct bio *bio, struct inode *inode, do { dip->bytes += bvec->bv_len; bvec++; - } while (bvec <= (bio->bi_io_vec + bio->bi_vcnt - 1)); + } while (bvec <= (dio_bio->bi_io_vec + dio_bio->bi_vcnt - 1)); - dip->disk_bytenr = (u64)bio->bi_sector << 9; - bio->bi_private = dip; + dip->disk_bytenr = (u64)dio_bio->bi_sector << 9; + io_bio->bi_private = dip; dip->errors = 0; - dip->orig_bio = bio; + dip->orig_bio = io_bio; + dip->dio_bio = dio_bio; atomic_set(&dip->pending_bios, 0); if (write) - bio->bi_end_io = btrfs_endio_direct_write; + io_bio->bi_end_io = btrfs_endio_direct_write; else - bio->bi_end_io = btrfs_endio_direct_read; + io_bio->bi_end_io = btrfs_endio_direct_read; ret = btrfs_submit_direct_hook(rw, dip, skip_sum); if (!ret) return; + +free_io_bio: + bio_put(io_bio); + free_ordered: /* * If this is a write, we need to clean up the reserved space and kill @@ -7299,7 +7321,7 @@ free_ordered: btrfs_put_ordered_extent(ordered); btrfs_put_ordered_extent(ordered); } - bio_endio(bio, ret); + bio_endio(dio_bio, ret); } static ssize_t check_direct_IO(struct btrfs_root *root, int rw, struct kiocb *iocb, diff --git a/fs/btrfs/raid56.c b/fs/btrfs/raid56.c index 0740621..0525e13 100644 --- a/fs/btrfs/raid56.c +++ b/fs/btrfs/raid56.c @@ -1050,7 +1050,7 @@ static int rbio_add_io_page(struct btrfs_raid_bio *rbio, } /* put a new bio on the list */ - bio = bio_alloc(GFP_NOFS, bio_max_len >> PAGE_SHIFT?:1); + bio = btrfs_io_bio_alloc(GFP_NOFS, bio_max_len >> PAGE_SHIFT?:1); if (!bio) return -ENOMEM; diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c index f489e24..79bd479 100644 --- a/fs/btrfs/scrub.c +++ b/fs/btrfs/scrub.c @@ -1296,7 +1296,7 @@ static void scrub_recheck_block(struct btrfs_fs_info *fs_info, } WARN_ON(!page->page); - bio = bio_alloc(GFP_NOFS, 1); + bio = btrfs_io_bio_alloc(GFP_NOFS, 1); if (!bio) { page->io_error = 1; sblock->no_io_error_seen = 0; @@ -1431,7 +1431,7 @@ static int scrub_repair_page_from_good_copy(struct scrub_block *sblock_bad, return -EIO; } - bio = bio_alloc(GFP_NOFS, 1); + bio = btrfs_io_bio_alloc(GFP_NOFS, 1); if (!bio) return -EIO; bio->bi_bdev = page_bad->dev->bdev; @@ -1522,7 +1522,7 @@ again: sbio->dev = wr_ctx->tgtdev; bio = sbio->bio; if (!bio) { - bio = bio_alloc(GFP_NOFS, wr_ctx->pages_per_wr_bio); + bio = btrfs_io_bio_alloc(GFP_NOFS, wr_ctx->pages_per_wr_bio); if (!bio) { mutex_unlock(&wr_ctx->wr_lock); return -ENOMEM; @@ -1930,7 +1930,7 @@ again: sbio->dev = spage->dev; bio = sbio->bio; if (!bio) { - bio = bio_alloc(GFP_NOFS, sctx->pages_per_rd_bio); + bio = btrfs_io_bio_alloc(GFP_NOFS, sctx->pages_per_rd_bio); if (!bio) return -ENOMEM; sbio->bio = bio; @@ -3307,7 +3307,7 @@ static int write_page_nocow(struct scrub_ctx *sctx, "btrfs: scrub write_page_nocow(bdev == NULL) is unexpected!\n"); return -EIO; } - bio = bio_alloc(GFP_NOFS, 1); + bio = btrfs_io_bio_alloc(GFP_NOFS, 1); if (!bio) { spin_lock(&sctx->stat_lock); sctx->stat.malloc_errors++; diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index a191bac..317afc7 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -5019,42 +5019,16 @@ int btrfs_rmap_block(struct btrfs_mapping_tree *map_tree, return 0; } -static void *merge_stripe_index_into_bio_private(void *bi_private, - unsigned int stripe_index) -{ - /* - * with single, dup, RAID0, RAID1 and RAID10, stripe_index is - * at most 1. - * The alternative solution (instead of stealing bits from the - * pointer) would be to allocate an intermediate structure - * that contains the old private pointer plus the stripe_index. - */ - BUG_ON((((uintptr_t)bi_private) & 3) != 0); - BUG_ON(stripe_index > 3); - return (void *)(((uintptr_t)bi_private) | stripe_index); -} - -static struct btrfs_bio *extract_bbio_from_bio_private(void *bi_private) -{ - return (struct btrfs_bio *)(((uintptr_t)bi_private) & ~((uintptr_t)3)); -} - -static unsigned int extract_stripe_index_from_bio_private(void *bi_private) -{ - return (unsigned int)((uintptr_t)bi_private) & 3; -} - static void btrfs_end_bio(struct bio *bio, int err) { - struct btrfs_bio *bbio = extract_bbio_from_bio_private(bio->bi_private); + struct btrfs_bio *bbio = bio->bi_private; int is_orig_bio = 0; if (err) { atomic_inc(&bbio->error); if (err == -EIO || err == -EREMOTEIO) { unsigned int stripe_index = - extract_stripe_index_from_bio_private( - bio->bi_private); + btrfs_io_bio(bio)->stripe_index; struct btrfs_device *dev; BUG_ON(stripe_index >= bbio->num_stripes); @@ -5084,8 +5058,7 @@ static void btrfs_end_bio(struct bio *bio, int err) } bio->bi_private = bbio->private; bio->bi_end_io = bbio->end_io; - bio->bi_bdev = (struct block_device *) - (unsigned long)bbio->mirror_num; + btrfs_io_bio(bio)->mirror_num = bbio->mirror_num; /* only send an error to the higher layers if it is * beyond the tolerance of the btrfs bio */ @@ -5211,8 +5184,7 @@ static void submit_stripe_bio(struct btrfs_root *root, struct btrfs_bio *bbio, struct btrfs_device *dev = bbio->stripes[dev_nr].dev; bio->bi_private = bbio; - bio->bi_private = merge_stripe_index_into_bio_private( - bio->bi_private, (unsigned int)dev_nr); + btrfs_io_bio(bio)->stripe_index = dev_nr; bio->bi_end_io = btrfs_end_bio; bio->bi_sector = physical >> 9; #ifdef DEBUG @@ -5273,8 +5245,7 @@ static void bbio_error(struct btrfs_bio *bbio, struct bio *bio, u64 logical) if (atomic_dec_and_test(&bbio->stripes_pending)) { bio->bi_private = bbio->private; bio->bi_end_io = bbio->end_io; - bio->bi_bdev = (struct block_device *) - (unsigned long)bbio->mirror_num; + btrfs_io_bio(bio)->mirror_num = bbio->mirror_num; bio->bi_sector = logical >> 9; kfree(bbio); bio_endio(bio, -EIO); @@ -5352,7 +5323,7 @@ int btrfs_map_bio(struct btrfs_root *root, int rw, struct bio *bio, } if (dev_nr < total_devs - 1) { - bio = bio_clone(first_bio, GFP_NOFS); + bio = btrfs_bio_clone(first_bio, GFP_NOFS); BUG_ON(!bio); /* -ENOMEM */ } else { bio = first_bio; diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h index 845ccbb..f6247e2 100644 --- a/fs/btrfs/volumes.h +++ b/fs/btrfs/volumes.h @@ -152,6 +152,26 @@ struct btrfs_fs_devices { int rotating; }; +/* + * we need the mirror number and stripe index to be passed around + * the call chain while we are processing end_io (especially errors). + * Really, what we need is a btrfs_bio structure that has this info + * and is properly sized with its stripe array, but we're not there + * quite yet. We have our own btrfs bioset, and all of the bios + * we allocate are actually btrfs_io_bios. We'll cram as much of + * struct btrfs_bio as we can into this over time. + */ +struct btrfs_io_bio { + unsigned long mirror_num; + unsigned long stripe_index; + struct bio bio; +}; + +static inline struct btrfs_io_bio *btrfs_io_bio(struct bio *bio) +{ + return container_of(bio, struct btrfs_io_bio, bio); +} + struct btrfs_bio_stripe { struct btrfs_device *dev; u64 physical; -- cgit v0.10.2 From d1ab2a98fa729d33973a82619732c534a6051f72 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:46 +0200 Subject: drivers/cpufreq: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang Acked-by: Viresh Kumar diff --git a/drivers/cpufreq/kirkwood-cpufreq.c b/drivers/cpufreq/kirkwood-cpufreq.c index d36ea8d..b2644af 100644 --- a/drivers/cpufreq/kirkwood-cpufreq.c +++ b/drivers/cpufreq/kirkwood-cpufreq.c @@ -171,10 +171,6 @@ static int kirkwood_cpufreq_probe(struct platform_device *pdev) priv.dev = &pdev->dev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "Cannot get memory resource\n"); - return -ENODEV; - } priv.base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(priv.base)) return PTR_ERR(priv.base); -- cgit v0.10.2 From 627ad13a39575e521a53f949fb2cb899e2945f02 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:47 +0200 Subject: drivers/dma: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang Acked-by: Stephen Warren diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c index ce19340..33f59ec 100644 --- a/drivers/dma/tegra20-apb-dma.c +++ b/drivers/dma/tegra20-apb-dma.c @@ -1273,11 +1273,6 @@ static int tegra_dma_probe(struct platform_device *pdev) platform_set_drvdata(pdev, tdma); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "No mem resource for DMA\n"); - return -EINVAL; - } - tdma->base_addr = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(tdma->base_addr)) return PTR_ERR(tdma->base_addr); -- cgit v0.10.2 From 8cfc2a1fce75d763bf59dd2d9d40add758fe7b46 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:47 +0200 Subject: drivers/gpio: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang Acked-by: Stephen Warren diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c index bf69a7e..3a4816a 100644 --- a/drivers/gpio/gpio-mvebu.c +++ b/drivers/gpio/gpio-mvebu.c @@ -619,11 +619,6 @@ static int mvebu_gpio_probe(struct platform_device *pdev) * per-CPU registers */ if (soc_variant == MVEBU_GPIO_SOC_VARIANT_ARMADAXP) { res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!res) { - dev_err(&pdev->dev, "Cannot get memory resource\n"); - return -ENODEV; - } - mvchip->percpu_membase = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(mvchip->percpu_membase)) diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c index da4cb5b..9a62672 100644 --- a/drivers/gpio/gpio-tegra.c +++ b/drivers/gpio/gpio-tegra.c @@ -463,11 +463,6 @@ static int tegra_gpio_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "Missing MEM resource\n"); - return -ENODEV; - } - regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(regs)) return PTR_ERR(regs); -- cgit v0.10.2 From 56261c544da785a3da46db4d033242618be50cce Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:47 +0200 Subject: drivers/gpu/drm/exynos: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index bbfc384..6652597 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -2005,11 +2005,6 @@ static int hdmi_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - DRM_ERROR("failed to find registers\n"); - return -ENOENT; - } - hdata->regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(hdata->regs)) return PTR_ERR(hdata->regs); -- cgit v0.10.2 From 849d34571fee01dc45dd4dc9cd13d748c86762df Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:47 +0200 Subject: drivers/gpu/host1x/drm: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang diff --git a/drivers/gpu/host1x/drm/dc.c b/drivers/gpu/host1x/drm/dc.c index 1e20603..8c04943 100644 --- a/drivers/gpu/host1x/drm/dc.c +++ b/drivers/gpu/host1x/drm/dc.c @@ -1128,11 +1128,6 @@ static int tegra_dc_probe(struct platform_device *pdev) return err; regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!regs) { - dev_err(&pdev->dev, "failed to get registers\n"); - return -ENXIO; - } - dc->regs = devm_ioremap_resource(&pdev->dev, regs); if (IS_ERR(dc->regs)) return PTR_ERR(dc->regs); -- cgit v0.10.2 From 00d083f928a37199e0fac984845bfd8b3587238e Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:48 +0200 Subject: drivers/i2c/busses: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang Acked-by: Stephen Warren Acked-by: Barry Song diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 6e8ee92..cab1c91 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -1082,11 +1082,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) /* map the registers */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(&pdev->dev, "cannot find IO resource\n"); - return -ENOENT; - } - i2c->regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(i2c->regs)) diff --git a/drivers/i2c/busses/i2c-sirf.c b/drivers/i2c/busses/i2c-sirf.c index 5a7ad24..a63c7d5 100644 --- a/drivers/i2c/busses/i2c-sirf.c +++ b/drivers/i2c/busses/i2c-sirf.c @@ -303,12 +303,6 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev) adap->class = I2C_CLASS_HWMON; mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (mem_res == NULL) { - dev_err(&pdev->dev, "Unable to get MEM resource\n"); - err = -EINVAL; - goto out; - } - siic->base = devm_ioremap_resource(&pdev->dev, mem_res); if (IS_ERR(siic->base)) { err = PTR_ERR(siic->base); diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index b60ff90..9aa1b60 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -714,11 +714,6 @@ static int tegra_i2c_probe(struct platform_device *pdev) int ret = 0; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "no mem resource\n"); - return -EINVAL; - } - base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(base)) return PTR_ERR(base); -- cgit v0.10.2 From 118811b234ce11cadba00c184b74442b3bff7c26 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:48 +0200 Subject: drivers/memory: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c index cadf1cc..04644e7 100644 --- a/drivers/memory/emif.c +++ b/drivers/memory/emif.c @@ -1560,12 +1560,6 @@ static int __init_or_module emif_probe(struct platform_device *pdev) platform_set_drvdata(pdev, emif); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(emif->dev, "%s: error getting memory resource\n", - __func__); - goto error; - } - emif->base = devm_ioremap_resource(emif->dev, res); if (IS_ERR(emif->base)) goto error; -- cgit v0.10.2 From 8897b2bfd2af79f8349754d006a700eef126686d Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:49 +0200 Subject: drivers/mfd: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang diff --git a/drivers/mfd/intel_msic.c b/drivers/mfd/intel_msic.c index 5be3b5e..d8d5137 100644 --- a/drivers/mfd/intel_msic.c +++ b/drivers/mfd/intel_msic.c @@ -414,11 +414,6 @@ static int intel_msic_probe(struct platform_device *pdev) * the clients via intel_msic_irq_read(). */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "failed to get SRAM iomem resource\n"); - return -ENODEV; - } - msic->irq_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(msic->irq_base)) return PTR_ERR(msic->irq_base); -- cgit v0.10.2 From 26a39bfca6c4eb32066a5982011c975286872b11 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:49 +0200 Subject: drivers/misc: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c index c09c28f..1abd5ad 100644 --- a/drivers/misc/atmel-ssc.c +++ b/drivers/misc/atmel-ssc.c @@ -154,11 +154,6 @@ static int ssc_probe(struct platform_device *pdev) ssc->pdata = (struct atmel_ssc_platform_data *)plat_dat; regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!regs) { - dev_dbg(&pdev->dev, "no mmio resource defined\n"); - return -ENXIO; - } - ssc->regs = devm_ioremap_resource(&pdev->dev, regs); if (IS_ERR(ssc->regs)) return PTR_ERR(ssc->regs); -- cgit v0.10.2 From e222a6eb77ca9897076761c854c25ffc43ab8949 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:49 +0200 Subject: drivers/mtd/nand: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang diff --git a/drivers/mtd/nand/lpc32xx_mlc.c b/drivers/mtd/nand/lpc32xx_mlc.c index a94facb..fd1df5e 100644 --- a/drivers/mtd/nand/lpc32xx_mlc.c +++ b/drivers/mtd/nand/lpc32xx_mlc.c @@ -672,11 +672,6 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) } rc = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (rc == NULL) { - dev_err(&pdev->dev, "No memory resource found for device!\r\n"); - return -ENXIO; - } - host->io_base = devm_ioremap_resource(&pdev->dev, rc); if (IS_ERR(host->io_base)) return PTR_ERR(host->io_base); -- cgit v0.10.2 From 042c730aa1a134c88c9afccef529694825891640 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:49 +0200 Subject: drivers/net/ethernet/renesas: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 33dc6f2..42e9dd0 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -2745,11 +2745,6 @@ static int sh_eth_drv_probe(struct platform_device *pdev) if (mdp->cd->tsu) { struct resource *rtsu; rtsu = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!rtsu) { - dev_err(&pdev->dev, "Not found TSU resource\n"); - ret = -ENODEV; - goto out_release; - } mdp->tsu_addr = devm_ioremap_resource(&pdev->dev, rtsu); if (IS_ERR(mdp->tsu_addr)) { ret = PTR_ERR(mdp->tsu_addr); -- cgit v0.10.2 From 0497a59450a70fcecffc288f9d864d6c778746ee Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:50 +0200 Subject: drivers/pinctrl: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang diff --git a/drivers/pinctrl/pinctrl-coh901.c b/drivers/pinctrl/pinctrl-coh901.c index edde3ac..a67af41 100644 --- a/drivers/pinctrl/pinctrl-coh901.c +++ b/drivers/pinctrl/pinctrl-coh901.c @@ -713,11 +713,6 @@ static int __init u300_gpio_probe(struct platform_device *pdev) gpio->dev = &pdev->dev; memres = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!memres) { - dev_err(gpio->dev, "could not get GPIO memory resource\n"); - return -ENODEV; - } - gpio->base = devm_ioremap_resource(&pdev->dev, memres); if (IS_ERR(gpio->base)) return PTR_ERR(gpio->base); diff --git a/drivers/pinctrl/pinctrl-exynos5440.c b/drivers/pinctrl/pinctrl-exynos5440.c index 6038503..32a48f4 100644 --- a/drivers/pinctrl/pinctrl-exynos5440.c +++ b/drivers/pinctrl/pinctrl-exynos5440.c @@ -1000,11 +1000,6 @@ static int exynos5440_pinctrl_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "cannot find IO resource\n"); - return -ENOENT; - } - priv->reg_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(priv->reg_base)) return PTR_ERR(priv->reg_base); diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index 9763668..055d016 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -932,11 +932,6 @@ static int samsung_pinctrl_probe(struct platform_device *pdev) drvdata->dev = dev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "cannot find IO resource\n"); - return -ENOENT; - } - drvdata->virt_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(drvdata->virt_base)) return PTR_ERR(drvdata->virt_base); diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c index f2977cf..e92132c 100644 --- a/drivers/pinctrl/pinctrl-xway.c +++ b/drivers/pinctrl/pinctrl-xway.c @@ -716,10 +716,6 @@ static int pinmux_xway_probe(struct platform_device *pdev) /* get and remap our register range */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "Failed to get resource\n"); - return -ENOENT; - } xway_info.membase[0] = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(xway_info.membase[0])) return PTR_ERR(xway_info.membase[0]); -- cgit v0.10.2 From 362e9cd2f54e3c72a37ff8e3319366554e48c555 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:50 +0200 Subject: drivers/pwm: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang Acked-by: Stephen Warren diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c index ec28798..c938bae 100644 --- a/drivers/pwm/pwm-imx.c +++ b/drivers/pwm/pwm-imx.c @@ -265,11 +265,6 @@ static int imx_pwm_probe(struct platform_device *pdev) imx->chip.npwm = 1; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (r == NULL) { - dev_err(&pdev->dev, "no memory resource defined\n"); - return -ENODEV; - } - imx->mmio_base = devm_ioremap_resource(&pdev->dev, r); if (IS_ERR(imx->mmio_base)) return PTR_ERR(imx->mmio_base); diff --git a/drivers/pwm/pwm-puv3.c b/drivers/pwm/pwm-puv3.c index d1eb499..ed6007b 100644 --- a/drivers/pwm/pwm-puv3.c +++ b/drivers/pwm/pwm-puv3.c @@ -117,11 +117,6 @@ static int pwm_probe(struct platform_device *pdev) return PTR_ERR(puv3->clk); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (r == NULL) { - dev_err(&pdev->dev, "no memory resource defined\n"); - return -ENODEV; - } - puv3->base = devm_ioremap_resource(&pdev->dev, r); if (IS_ERR(puv3->base)) return PTR_ERR(puv3->base); diff --git a/drivers/pwm/pwm-pxa.c b/drivers/pwm/pwm-pxa.c index dee6ab55..dc97175 100644 --- a/drivers/pwm/pwm-pxa.c +++ b/drivers/pwm/pwm-pxa.c @@ -147,11 +147,6 @@ static int pwm_probe(struct platform_device *pdev) pwm->chip.npwm = (id->driver_data & HAS_SECONDARY_PWM) ? 2 : 1; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (r == NULL) { - dev_err(&pdev->dev, "no memory resource defined\n"); - return -ENODEV; - } - pwm->mmio_base = devm_ioremap_resource(&pdev->dev, r); if (IS_ERR(pwm->mmio_base)) return PTR_ERR(pwm->mmio_base); diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c index 3d75f4a..a540293 100644 --- a/drivers/pwm/pwm-tegra.c +++ b/drivers/pwm/pwm-tegra.c @@ -181,11 +181,6 @@ static int tegra_pwm_probe(struct platform_device *pdev) pwm->dev = &pdev->dev; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!r) { - dev_err(&pdev->dev, "no memory resources defined\n"); - return -ENODEV; - } - pwm->mmio_base = devm_ioremap_resource(&pdev->dev, r); if (IS_ERR(pwm->mmio_base)) return PTR_ERR(pwm->mmio_base); diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c index 0d65fb2..72ca42d 100644 --- a/drivers/pwm/pwm-tiecap.c +++ b/drivers/pwm/pwm-tiecap.c @@ -240,11 +240,6 @@ static int ecap_pwm_probe(struct platform_device *pdev) pc->chip.npwm = 1; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!r) { - dev_err(&pdev->dev, "no memory resource defined\n"); - return -ENODEV; - } - pc->mmio_base = devm_ioremap_resource(&pdev->dev, r); if (IS_ERR(pc->mmio_base)) return PTR_ERR(pc->mmio_base); diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c index 6a21759..48a485c 100644 --- a/drivers/pwm/pwm-tiehrpwm.c +++ b/drivers/pwm/pwm-tiehrpwm.c @@ -471,11 +471,6 @@ static int ehrpwm_pwm_probe(struct platform_device *pdev) pc->chip.npwm = NUM_PWM_CHANNEL; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!r) { - dev_err(&pdev->dev, "no memory resource defined\n"); - return -ENODEV; - } - pc->mmio_base = devm_ioremap_resource(&pdev->dev, r); if (IS_ERR(pc->mmio_base)) return PTR_ERR(pc->mmio_base); diff --git a/drivers/pwm/pwm-tipwmss.c b/drivers/pwm/pwm-tipwmss.c index c9c3d3a..3b119bc 100644 --- a/drivers/pwm/pwm-tipwmss.c +++ b/drivers/pwm/pwm-tipwmss.c @@ -70,11 +70,6 @@ static int pwmss_probe(struct platform_device *pdev) mutex_init(&info->pwmss_lock); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!r) { - dev_err(&pdev->dev, "no memory resource defined\n"); - return -ENODEV; - } - info->mmio_base = devm_ioremap_resource(&pdev->dev, r); if (IS_ERR(info->mmio_base)) return PTR_ERR(info->mmio_base); diff --git a/drivers/pwm/pwm-vt8500.c b/drivers/pwm/pwm-vt8500.c index 69effd1..323125a 100644 --- a/drivers/pwm/pwm-vt8500.c +++ b/drivers/pwm/pwm-vt8500.c @@ -230,11 +230,6 @@ static int vt8500_pwm_probe(struct platform_device *pdev) } r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (r == NULL) { - dev_err(&pdev->dev, "no memory resource defined\n"); - return -ENODEV; - } - chip->base = devm_ioremap_resource(&pdev->dev, r); if (IS_ERR(chip->base)) return PTR_ERR(chip->base); -- cgit v0.10.2 From a177c3ac25df166dbdde03e09ba8cb3065742807 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:50 +0200 Subject: drivers/rtc: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang Acked-by: Stephen Warren diff --git a/drivers/rtc/rtc-nuc900.c b/drivers/rtc/rtc-nuc900.c index f5dfb6e..d592e2f 100644 --- a/drivers/rtc/rtc-nuc900.c +++ b/drivers/rtc/rtc-nuc900.c @@ -234,11 +234,6 @@ static int __init nuc900_rtc_probe(struct platform_device *pdev) return -ENOMEM; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "platform_get_resource failed\n"); - return -ENXIO; - } - nuc900_rtc->rtc_reg = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(nuc900_rtc->rtc_reg)) return PTR_ERR(nuc900_rtc->rtc_reg); diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c index 4e1bdb8..b0ba3fc 100644 --- a/drivers/rtc/rtc-omap.c +++ b/drivers/rtc/rtc-omap.c @@ -347,11 +347,6 @@ static int __init omap_rtc_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - pr_debug("%s: RTC resource data missing\n", pdev->name); - return -ENOENT; - } - rtc_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(rtc_base)) return PTR_ERR(rtc_base); diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index 14040b2..0b495e8 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -477,11 +477,6 @@ static int s3c_rtc_probe(struct platform_device *pdev) /* get the memory region */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(&pdev->dev, "failed to get memory region resource\n"); - return -ENOENT; - } - s3c_rtc_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(s3c_rtc_base)) return PTR_ERR(s3c_rtc_base); diff --git a/drivers/rtc/rtc-tegra.c b/drivers/rtc/rtc-tegra.c index a34315d..76af92a 100644 --- a/drivers/rtc/rtc-tegra.c +++ b/drivers/rtc/rtc-tegra.c @@ -322,12 +322,6 @@ static int __init tegra_rtc_probe(struct platform_device *pdev) return -ENOMEM; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, - "Unable to allocate resources for device.\n"); - return -EBUSY; - } - info->rtc_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(info->rtc_base)) return PTR_ERR(info->rtc_base); -- cgit v0.10.2 From 45bae305e495527fb1746c4fc741b53acfc5802c Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:51 +0200 Subject: drivers/spi: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang Acked-by: Stephen Warren diff --git a/drivers/spi/spi-tegra20-sflash.c b/drivers/spi/spi-tegra20-sflash.c index d65c000..09df8e2 100644 --- a/drivers/spi/spi-tegra20-sflash.c +++ b/drivers/spi/spi-tegra20-sflash.c @@ -489,11 +489,6 @@ static int tegra_sflash_probe(struct platform_device *pdev) tegra_sflash_parse_dt(tsd); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!r) { - dev_err(&pdev->dev, "No IO memory resource\n"); - ret = -ENODEV; - goto exit_free_master; - } tsd->base = devm_ioremap_resource(&pdev->dev, r); if (IS_ERR(tsd->base)) { ret = PTR_ERR(tsd->base); -- cgit v0.10.2 From b132566eab75c83a6892bfa835285824f3b40914 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:51 +0200 Subject: drivers/staging/dwc2: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang diff --git a/drivers/staging/dwc2/platform.c b/drivers/staging/dwc2/platform.c index 1f3d581..b610960 100644 --- a/drivers/staging/dwc2/platform.c +++ b/drivers/staging/dwc2/platform.c @@ -102,11 +102,6 @@ static int dwc2_driver_probe(struct platform_device *dev) } res = platform_get_resource(dev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&dev->dev, "missing memory base resource\n"); - return -EINVAL; - } - hsotg->regs = devm_ioremap_resource(&dev->dev, res); if (IS_ERR(hsotg->regs)) return PTR_ERR(hsotg->regs); -- cgit v0.10.2 From 4f39b5b5aeeab850ef40654a2ea2e327833aba0c Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:51 +0200 Subject: drivers/staging/nvec: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c index a88959f..863b22e 100644 --- a/drivers/staging/nvec/nvec.c +++ b/drivers/staging/nvec/nvec.c @@ -800,11 +800,6 @@ static int tegra_nvec_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "no mem resource?\n"); - return -ENODEV; - } - base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(base)) return PTR_ERR(base); -- cgit v0.10.2 From b948cc6161529d3efda05207225b72421ee005d1 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:51 +0200 Subject: drivers/thermal: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c index 5b4d75f..54ffd64 100644 --- a/drivers/thermal/armada_thermal.c +++ b/drivers/thermal/armada_thermal.c @@ -169,21 +169,11 @@ static int armada_thermal_probe(struct platform_device *pdev) return -ENOMEM; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "Failed to get platform resource\n"); - return -ENODEV; - } - priv->sensor = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(priv->sensor)) return PTR_ERR(priv->sensor); res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!res) { - dev_err(&pdev->dev, "Failed to get platform resource\n"); - return -ENODEV; - } - priv->control = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(priv->control)) return PTR_ERR(priv->control); diff --git a/drivers/thermal/dove_thermal.c b/drivers/thermal/dove_thermal.c index 4b15a5f..a088d13 100644 --- a/drivers/thermal/dove_thermal.c +++ b/drivers/thermal/dove_thermal.c @@ -149,10 +149,6 @@ static int dove_thermal_probe(struct platform_device *pdev) return PTR_ERR(priv->sensor); res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!res) { - dev_err(&pdev->dev, "Failed to get platform resource\n"); - return -ENODEV; - } priv->control = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(priv->control)) return PTR_ERR(priv->control); diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c index d20ce9e..788b1dd 100644 --- a/drivers/thermal/exynos_thermal.c +++ b/drivers/thermal/exynos_thermal.c @@ -925,11 +925,6 @@ static int exynos_tmu_probe(struct platform_device *pdev) INIT_WORK(&data->irq_work, exynos_tmu_work); data->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!data->mem) { - dev_err(&pdev->dev, "Failed to get platform resource\n"); - return -ENOENT; - } - data->base = devm_ioremap_resource(&pdev->dev, data->mem); if (IS_ERR(data->base)) return PTR_ERR(data->base); -- cgit v0.10.2 From 122af6d0eca8d36b3d1d1df1b552d94db268e157 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:52 +0200 Subject: drivers/usb/chipidea: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang Acked-by: Alexander Shishkin diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 450107e..49b098b 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -370,11 +370,6 @@ static int ci_hdrc_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "missing resource\n"); - return -ENODEV; - } - base = devm_ioremap_resource(dev, res); if (IS_ERR(base)) return PTR_ERR(base); -- cgit v0.10.2 From bd935817db7b7ce71fd1922677fc42fa3edcd4dc Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:52 +0200 Subject: drivers/usb/gadget: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang diff --git a/drivers/usb/gadget/bcm63xx_udc.c b/drivers/usb/gadget/bcm63xx_udc.c index 6e65182..7922977 100644 --- a/drivers/usb/gadget/bcm63xx_udc.c +++ b/drivers/usb/gadget/bcm63xx_udc.c @@ -2334,21 +2334,11 @@ static int bcm63xx_udc_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "error finding USBD resource\n"); - return -ENXIO; - } - udc->usbd_regs = devm_ioremap_resource(dev, res); if (IS_ERR(udc->usbd_regs)) return PTR_ERR(udc->usbd_regs); res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!res) { - dev_err(dev, "error finding IUDMA resource\n"); - return -ENXIO; - } - udc->iudma_regs = devm_ioremap_resource(dev, res); if (IS_ERR(udc->iudma_regs)) return PTR_ERR(udc->iudma_regs); -- cgit v0.10.2 From bb522812a1a620aa044448fcc8ea9baf0559be46 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:52 +0200 Subject: drivers/usb/host: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang Acked-by: Alan Stern diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c index f4988fb..f303cb0 100644 --- a/drivers/usb/host/ohci-nxp.c +++ b/drivers/usb/host/ohci-nxp.c @@ -300,12 +300,6 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "Failed to get MEM resource\n"); - ret = -ENOMEM; - goto out8; - } - hcd->regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(hcd->regs)) { ret = PTR_ERR(hcd->regs); -- cgit v0.10.2 From 9c5fdd38276973c8c65394220e5e740be561cf92 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:53 +0200 Subject: drivers/usb/phy: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang diff --git a/drivers/usb/phy/phy-mv-u3d-usb.c b/drivers/usb/phy/phy-mv-u3d-usb.c index f7838a4..1568ea6 100644 --- a/drivers/usb/phy/phy-mv-u3d-usb.c +++ b/drivers/usb/phy/phy-mv-u3d-usb.c @@ -278,11 +278,6 @@ static int mv_u3d_phy_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "missing mem resource\n"); - return -ENODEV; - } - phy_base = devm_ioremap_resource(dev, res); if (IS_ERR(phy_base)) return PTR_ERR(phy_base); diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index 9d4381e..eb25dd2 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -130,11 +130,6 @@ static int mxs_phy_probe(struct platform_device *pdev) int ret; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "can't get device resources\n"); - return -ENOENT; - } - base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(base)) return PTR_ERR(base); diff --git a/drivers/usb/phy/phy-samsung-usb2.c b/drivers/usb/phy/phy-samsung-usb2.c index 45ffe03..9d5e273 100644 --- a/drivers/usb/phy/phy-samsung-usb2.c +++ b/drivers/usb/phy/phy-samsung-usb2.c @@ -363,11 +363,6 @@ static int samsung_usb2phy_probe(struct platform_device *pdev) int ret; phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!phy_mem) { - dev_err(dev, "%s: missing mem resource\n", __func__); - return -ENODEV; - } - phy_base = devm_ioremap_resource(dev, phy_mem); if (IS_ERR(phy_base)) return PTR_ERR(phy_base); diff --git a/drivers/usb/phy/phy-samsung-usb3.c b/drivers/usb/phy/phy-samsung-usb3.c index 133f3d0..5a9efcb 100644 --- a/drivers/usb/phy/phy-samsung-usb3.c +++ b/drivers/usb/phy/phy-samsung-usb3.c @@ -239,11 +239,6 @@ static int samsung_usb3phy_probe(struct platform_device *pdev) int ret; phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!phy_mem) { - dev_err(dev, "%s: missing mem resource\n", __func__); - return -ENODEV; - } - phy_base = devm_ioremap_resource(dev, phy_mem); if (IS_ERR(phy_base)) return PTR_ERR(phy_base); -- cgit v0.10.2 From dc83d05b10046686882e4f07a3242aa7319de49b Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:53 +0200 Subject: drivers/video/omap2: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang diff --git a/drivers/video/omap2/vrfb.c b/drivers/video/omap2/vrfb.c index 5261229..f346b02 100644 --- a/drivers/video/omap2/vrfb.c +++ b/drivers/video/omap2/vrfb.c @@ -353,11 +353,6 @@ static int __init vrfb_probe(struct platform_device *pdev) /* first resource is the register res, the rest are vrfb contexts */ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem) { - dev_err(&pdev->dev, "can't get vrfb base address\n"); - return -EINVAL; - } - vrfb_base = devm_ioremap_resource(&pdev->dev, mem); if (IS_ERR(vrfb_base)) return PTR_ERR(vrfb_base); -- cgit v0.10.2 From ffc0775be17784e258836919fd3ec9c02bb6dc25 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:53 +0200 Subject: drivers/video/omap2/dss: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c index 17f4d55..a109934 100644 --- a/drivers/video/omap2/dss/hdmi.c +++ b/drivers/video/omap2/dss/hdmi.c @@ -1065,10 +1065,6 @@ static int omapdss_hdmihw_probe(struct platform_device *pdev) mutex_init(&hdmi.ip_data.lock); res = platform_get_resource(hdmi.pdev, IORESOURCE_MEM, 0); - if (!res) { - DSSERR("can't get IORESOURCE_MEM HDMI\n"); - return -EINVAL; - } /* Base address taken from platform */ hdmi.ip_data.base_wp = devm_ioremap_resource(&pdev->dev, res); -- cgit v0.10.2 From ac066a5c1c012e2a1375ff105b98b3b22fc9e7d2 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:53 +0200 Subject: drivers/w1/masters: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c index db2390a..6e94d8dd 100644 --- a/drivers/w1/masters/omap_hdq.c +++ b/drivers/w1/masters/omap_hdq.c @@ -555,11 +555,6 @@ static int omap_hdq_probe(struct platform_device *pdev) platform_set_drvdata(pdev, hdq_data); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_dbg(&pdev->dev, "unable to get resource\n"); - return -ENXIO; - } - hdq_data->hdq_base = devm_ioremap_resource(dev, res); if (IS_ERR(hdq_data->hdq_base)) return PTR_ERR(hdq_data->hdq_base); -- cgit v0.10.2 From 937192a7cf9f09e3ea02ef723855674f97e826bc Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:54 +0200 Subject: drivers/watchdog: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang diff --git a/drivers/watchdog/ath79_wdt.c b/drivers/watchdog/ath79_wdt.c index d184c48..37cb09b 100644 --- a/drivers/watchdog/ath79_wdt.c +++ b/drivers/watchdog/ath79_wdt.c @@ -248,11 +248,6 @@ static int ath79_wdt_probe(struct platform_device *pdev) return -EBUSY; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "no memory resource found\n"); - return -EINVAL; - } - wdt_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(wdt_base)) return PTR_ERR(wdt_base); diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c index 100d4fb..bead774 100644 --- a/drivers/watchdog/davinci_wdt.c +++ b/drivers/watchdog/davinci_wdt.c @@ -217,11 +217,6 @@ static int davinci_wdt_probe(struct platform_device *pdev) dev_info(dev, "heartbeat %d sec\n", heartbeat); wdt_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (wdt_mem == NULL) { - dev_err(dev, "failed to get memory region resource\n"); - return -ENOENT; - } - wdt_base = devm_ioremap_resource(dev, wdt_mem); if (IS_ERR(wdt_base)) return PTR_ERR(wdt_base); diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c index ff90882..62946c2 100644 --- a/drivers/watchdog/imx2_wdt.c +++ b/drivers/watchdog/imx2_wdt.c @@ -257,11 +257,6 @@ static int __init imx2_wdt_probe(struct platform_device *pdev) struct resource *res; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "can't get device resources\n"); - return -ENODEV; - } - imx2_wdt.base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(imx2_wdt.base)) return PTR_ERR(imx2_wdt.base); -- cgit v0.10.2 From d7fc0dde96248c0d90e02bc95dc5c003ece84982 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:55 +0200 Subject: arch/arm/mach-tegra: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang Acked-by: Stephen Warren diff --git a/arch/arm/mach-tegra/tegra2_emc.c b/arch/arm/mach-tegra/tegra2_emc.c index 9e8bdfa..31e69a0 100644 --- a/arch/arm/mach-tegra/tegra2_emc.c +++ b/arch/arm/mach-tegra/tegra2_emc.c @@ -307,11 +307,6 @@ static int tegra_emc_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "missing register base\n"); - return -ENOMEM; - } - emc_regbase = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(emc_regbase)) return PTR_ERR(emc_regbase); -- cgit v0.10.2 From c818b58e63f1d9fe1c070f0e578ef5168de35312 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:55 +0200 Subject: arch/arm/plat-samsung: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c index ca07cb1..79690f2 100644 --- a/arch/arm/plat-samsung/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -381,11 +381,6 @@ static int s3c_adc_probe(struct platform_device *pdev) } regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!regs) { - dev_err(dev, "failed to find registers\n"); - return -ENXIO; - } - adc->regs = devm_ioremap_resource(dev, regs); if (IS_ERR(adc->regs)) return PTR_ERR(adc->regs); -- cgit v0.10.2 From 02fdb79f3623de6281dae9ae26ff5a8e1aa58970 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:56 +0200 Subject: arch/mips/lantiq/xway: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang Acked-by: John Crispin diff --git a/arch/mips/lantiq/xway/gptu.c b/arch/mips/lantiq/xway/gptu.c index 9861c86..d6a79b8 100644 --- a/arch/mips/lantiq/xway/gptu.c +++ b/arch/mips/lantiq/xway/gptu.c @@ -144,10 +144,6 @@ static int gptu_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "Failed to get resource\n"); - return -ENOMEM; - } /* remap gptu register range */ gptu_membase = devm_ioremap_resource(&pdev->dev, res); -- cgit v0.10.2 From 5f68d04d39eeb16b9ea7639f62c4ae59163b4813 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:57 +0200 Subject: sound/soc/fsl: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang diff --git a/sound/soc/fsl/imx-ssi.c b/sound/soc/fsl/imx-ssi.c index 902fab0..c6fa03e 100644 --- a/sound/soc/fsl/imx-ssi.c +++ b/sound/soc/fsl/imx-ssi.c @@ -540,11 +540,6 @@ static int imx_ssi_probe(struct platform_device *pdev) clk_prepare_enable(ssi->clk); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - ret = -ENODEV; - goto failed_get_resource; - } - ssi->base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(ssi->base)) { ret = PTR_ERR(ssi->base); @@ -633,7 +628,6 @@ failed_pdev_fiq_alloc: snd_soc_unregister_component(&pdev->dev); failed_register: release_mem_region(res->start, resource_size(res)); -failed_get_resource: clk_disable_unprepare(ssi->clk); failed_clk: -- cgit v0.10.2 From 12716cd44da7e6c935e2fb1783417ca31fbbaa97 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:57 +0200 Subject: sound/soc/kirkwood: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang diff --git a/sound/soc/kirkwood/kirkwood-i2s.c b/sound/soc/kirkwood/kirkwood-i2s.c index befe68f..4c9dad3 100644 --- a/sound/soc/kirkwood/kirkwood-i2s.c +++ b/sound/soc/kirkwood/kirkwood-i2s.c @@ -471,11 +471,6 @@ static int kirkwood_i2s_dev_probe(struct platform_device *pdev) dev_set_drvdata(&pdev->dev, priv); mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem) { - dev_err(&pdev->dev, "platform_get_resource failed\n"); - return -ENXIO; - } - priv->io = devm_ioremap_resource(&pdev->dev, mem); if (IS_ERR(priv->io)) return PTR_ERR(priv->io); -- cgit v0.10.2 From 014be2c8eac3381e202f684c1f35ae184a8b152b Mon Sep 17 00:00:00 2001 From: Sridhar Samudrala Date: Fri, 17 May 2013 06:39:07 +0000 Subject: vxlan: Update vxlan fdb 'used' field after each usage Fix some instances where vxlan fdb 'used' field is not updated after the entry is used. v2: rename vxlan_find_mac() as __vxlan_find_mac() and create a new vxlan_find_mac() that also updates ->used field. Signed-off-by: Sridhar Samudrala Signed-off-by: David S. Miller diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index ba81f3c..3b1d2ee 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -301,7 +301,7 @@ static inline struct hlist_head *vxlan_fdb_head(struct vxlan_dev *vxlan, } /* Look up Ethernet address in forwarding table */ -static struct vxlan_fdb *vxlan_find_mac(struct vxlan_dev *vxlan, +static struct vxlan_fdb *__vxlan_find_mac(struct vxlan_dev *vxlan, const u8 *mac) { @@ -316,6 +316,18 @@ static struct vxlan_fdb *vxlan_find_mac(struct vxlan_dev *vxlan, return NULL; } +static struct vxlan_fdb *vxlan_find_mac(struct vxlan_dev *vxlan, + const u8 *mac) +{ + struct vxlan_fdb *f; + + f = __vxlan_find_mac(vxlan, mac); + if (f) + f->used = jiffies; + + return f; +} + /* Add/update destinations for multicast */ static int vxlan_fdb_append(struct vxlan_fdb *f, __be32 ip, __be16 port, __u32 vni, __u32 ifindex) @@ -353,7 +365,7 @@ static int vxlan_fdb_create(struct vxlan_dev *vxlan, struct vxlan_fdb *f; int notify = 0; - f = vxlan_find_mac(vxlan, mac); + f = __vxlan_find_mac(vxlan, mac); if (f) { if (flags & NLM_F_EXCL) { netdev_dbg(vxlan->dev, @@ -563,7 +575,6 @@ static void vxlan_snoop(struct net_device *dev, f = vxlan_find_mac(vxlan, src_mac); if (likely(f)) { - f->used = jiffies; if (likely(f->remote.remote_ip == src_ip)) return; -- cgit v0.10.2 From 284041ef21fdf2e0d216ab6b787bc9072b4eb58a Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 17 May 2013 04:53:13 +0000 Subject: ipv6: fix possible crashes in ip6_cork_release() commit 0178b695fd6b4 ("ipv6: Copy cork options in ip6_append_data") added some code duplication and bad error recovery, leading to potential crash in ip6_cork_release() as kfree() could be called with garbage. use kzalloc() to make sure this wont happen. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Cc: Herbert Xu Cc: Hideaki YOSHIFUJI Cc: Neal Cardwell diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index d2eedf1..dae1949 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -1147,7 +1147,7 @@ int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to, if (WARN_ON(np->cork.opt)) return -EINVAL; - np->cork.opt = kmalloc(opt->tot_len, sk->sk_allocation); + np->cork.opt = kzalloc(opt->tot_len, sk->sk_allocation); if (unlikely(np->cork.opt == NULL)) return -ENOBUFS; -- cgit v0.10.2 From 8b9232141bf40788cce31f893c13f344ec31ee66 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 18 May 2013 17:02:59 +0200 Subject: MIPS: Rewrite pfn_valid to work in modules, too. This fixes: MODPOST 393 modules ERROR: "min_low_pfn" [arch/mips/kvm/kvm.ko] undefined! make[3]: *** [__modpost] Error 1 It would have been possible to just export min_low_pfn but in the end pfn_valid should return 1 for any pfn argument for which a struct page exists so using min_low_pfn was wrong anyway. Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h index ec1ca53..f59552f 100644 --- a/arch/mips/include/asm/page.h +++ b/arch/mips/include/asm/page.h @@ -171,14 +171,13 @@ typedef struct { unsigned long pgprot; } pgprot_t; #ifdef CONFIG_FLATMEM -#define pfn_valid(pfn) \ -({ \ - unsigned long __pfn = (pfn); \ - /* avoid include hell */ \ - extern unsigned long min_low_pfn; \ - \ - __pfn >= min_low_pfn && __pfn < max_mapnr; \ -}) +static inline int pfn_valid(unsigned long pfn) +{ + /* avoid include hell */ + extern unsigned long max_mapnr; + + return pfn >= ARCH_PFN_OFFSET && pfn < max_mapnr; +} #elif defined(CONFIG_SPARSEMEM) -- cgit v0.10.2 From c93a64fe6ca6a03fbe076f705e5f5d30d1bded79 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Wed, 15 May 2013 19:02:24 +0200 Subject: KVM: take over co-maintainership from Marcelo, fix MAINTAINERS entry As announced last week by Marcelo Tosatti, I will be co-maintaining KVM together with Gleb. Cc: Marcelo Tosatti Cc: Gleb Natapov Cc: kvm@vger.kernel.org Acked-by: Marcelo Tosatti Signed-off-by: Paolo Bonzini Signed-off-by: Gleb Natapov diff --git a/MAINTAINERS b/MAINTAINERS index 3d7782b..790e5a9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4641,12 +4641,13 @@ F: include/linux/sunrpc/ F: include/uapi/linux/sunrpc/ KERNEL VIRTUAL MACHINE (KVM) -M: Marcelo Tosatti M: Gleb Natapov +M: Paolo Bonzini L: kvm@vger.kernel.org -W: http://kvm.qumranet.com +W: http://linux-kvm.org S: Supported -F: Documentation/*/kvm.txt +F: Documentation/*/kvm*.txt +F: Documentation/virtual/kvm/ F: arch/*/kvm/ F: arch/*/include/asm/kvm* F: include/linux/kvm* -- cgit v0.10.2 From 4e2284d23b5124df3a039fce25093bef619731ff Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 19 May 2013 16:57:30 +0200 Subject: hwmon: (tmp401) Drop redundant safety on cache lifetime time_after (as opposed to time_after_equal) already ensures that the cache lifetime is at least as much as requested. There is no point in manually adding another jiffy to that value, and this can confuse the reader into wrong interpretation. Signed-off-by: Jean Delvare Cc: Imre Deak Cc: Guenter Roeck Signed-off-by: Guenter Roeck diff --git a/drivers/hwmon/tmp401.c b/drivers/hwmon/tmp401.c index a478454..dfe6d95 100644 --- a/drivers/hwmon/tmp401.c +++ b/drivers/hwmon/tmp401.c @@ -240,7 +240,7 @@ static struct tmp401_data *tmp401_update_device(struct device *dev) mutex_lock(&data->update_lock); next_update = data->last_updated + - msecs_to_jiffies(data->update_interval) + 1; + msecs_to_jiffies(data->update_interval); if (time_after(jiffies, next_update) || !data->valid) { if (data->kind != tmp432) { /* -- cgit v0.10.2 From 610bba8b9372597967aefdc8d90661d2ab248802 Mon Sep 17 00:00:00 2001 From: Alasdair G Kergon Date: Sun, 19 May 2013 18:57:50 +0100 Subject: dm thin: fix metadata dev resize detection Fix detection of the need to resize the dm thin metadata device. The code incorrectly tried to extend the metadata device when it didn't need to due to a merging error with patch 24347e9 ("dm thin: detect metadata device resizing"). device-mapper: transaction manager: couldn't open metadata space map device-mapper: thin metadata: tm_open_with_sm failed device-mapper: thin: aborting transaction failed device-mapper: thin: switching pool to failure mode Signed-off-by: Alasdair G Kergon diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c index 759cffc..88f2f80 100644 --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -2188,7 +2188,7 @@ static int maybe_resize_metadata_dev(struct dm_target *ti, bool *need_commit) *need_commit = false; - metadata_dev_size = get_metadata_dev_size(pool->md_dev); + metadata_dev_size = get_metadata_dev_size_in_blocks(pool->md_dev); r = dm_pool_get_metadata_dev_size(pool->pmd, &sb_metadata_dev_size); if (r) { @@ -2197,7 +2197,7 @@ static int maybe_resize_metadata_dev(struct dm_target *ti, bool *need_commit) } if (metadata_dev_size < sb_metadata_dev_size) { - DMERR("metadata device (%llu sectors) too small: expected %llu", + DMERR("metadata device (%llu blocks) too small: expected %llu", metadata_dev_size, sb_metadata_dev_size); return -EINVAL; -- cgit v0.10.2 From c689cbac25b4fce2f3d7de2e4dd6678caeebdcb8 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Fri, 17 May 2013 14:25:03 +0200 Subject: ARM: mvebu: select ARCH_REQUIRE_GPIOLIB for mvebu platform Initially ARCH_REQUIRE_GPIOLIB was part of Thomas Petazzoni series when he introduced the gpiolib support for mvebu: 93a59cf arm: mvebu: use GPIO support now that a driver is available This commit was written to be applied for the ARCH_MVEBU which was located in arch/arm/KConfig and was merged in 3.7. In the same time Rob Herring moved the ARCH_MVEBU block to arch/arm/mach-mvebu/Kconfig with this commit and also merged in 3.7: 387798b ARM: initial multiplatform support Unfortunately the ARCH_REQUIRE_GPIOLIB have been lost during this migration. This was not noticed until the v3.10-rc1, because mvebu as part of ARCH_MULTIPLATFORM was always selected with ARCH_VEXPRESS, and this architect selected ARCH_REQUIRE_GPIOLIB. Since the following commit from Arnd: "883a106 ARM: default machine descriptor for multiplatform", ARCH_VEXPRESS was then no more selected by default with ARCH_MVEBU and it made appeared the lack of ARCH_REQUIRE_GPIOLIB for mvebu. This commit added back the selection of ARCH_REQUIRE_GPIOLIB for ARCH_MVEBU. Signed-off-by: Gregory CLEMENT Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index e11acbb..80a8bca 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -15,6 +15,7 @@ config ARCH_MVEBU select MVEBU_CLK_GATING select MVEBU_MBUS select ZONE_DMA if ARM_LPAE + select ARCH_REQUIRE_GPIOLIB if ARCH_MVEBU -- cgit v0.10.2 From 8eed481e6fe2c28c2a579ada0c8ba5cbad45bf2c Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 16 May 2013 17:55:16 +0200 Subject: arm: mvebu: fix the 'ranges' property to handle PCIe Since 82a682676 ('ARM: dts: mvebu: Convert all the mvebu files to use the range property') all the device nodes of Armada 370/XP are under a common 'ranges' property that translates the device register addresses into their absolute address, thanks to the base address of the internal register space. However, beyond just the register areas, there are also PCIe I/O and memory regions, whose addresses should be properly translated. This patch fixes the Armada 370 and XP ranges property to take PCIe into account properly. Signed-off-by: Thomas Petazzoni Signed-off-by: Jason Cooper diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 272bbc6..550eb77 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -33,7 +33,8 @@ #size-cells = <1>; compatible = "simple-bus"; interrupt-parent = <&mpic>; - ranges = <0 0 0xd0000000 0x100000>; + ranges = <0 0 0xd0000000 0x0100000 /* internal registers */ + 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */>; internal-regs { compatible = "simple-bus"; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 0c9130b..a1a8703 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -29,7 +29,8 @@ }; soc { - ranges = <0 0xd0000000 0x100000>; + ranges = <0 0xd0000000 0x0100000 /* internal registers */ + 0xe0000000 0xe0000000 0x8100000 /* PCIe */>; internal-regs { system-controller@18200 { compatible = "marvell,armada-370-xp-system-controller"; -- cgit v0.10.2 From 6b21e1b77d1a3d58ebfd513264c885695e8a0ba5 Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Fri, 17 May 2013 09:08:50 +0000 Subject: netlabel: improve domain mapping validation The net/netlabel/netlabel_domainhash.c:netlbl_domhsh_add() function does not properly validate new domain hash entries resulting in potential problems when an administrator attempts to add an invalid entry. One such problem, as reported by Vlad Halilov, is a kernel BUG (found in netlabel_domainhash.c:netlbl_domhsh_audit_add()) when adding an IPv6 outbound mapping with a CIPSO configuration. This patch corrects this problem by adding the necessary validation code to netlbl_domhsh_add() via the newly created netlbl_domhsh_validate() function. Ideally this patch should also be pushed to the currently active -stable trees. Reported-by: Vlad Halilov Signed-off-by: Paul Moore Signed-off-by: David S. Miller diff --git a/net/netlabel/netlabel_domainhash.c b/net/netlabel/netlabel_domainhash.c index d8d4243..6bb1d42 100644 --- a/net/netlabel/netlabel_domainhash.c +++ b/net/netlabel/netlabel_domainhash.c @@ -245,6 +245,71 @@ static void netlbl_domhsh_audit_add(struct netlbl_dom_map *entry, } } +/** + * netlbl_domhsh_validate - Validate a new domain mapping entry + * @entry: the entry to validate + * + * This function validates the new domain mapping entry to ensure that it is + * a valid entry. Returns zero on success, negative values on failure. + * + */ +static int netlbl_domhsh_validate(const struct netlbl_dom_map *entry) +{ + struct netlbl_af4list *iter4; + struct netlbl_domaddr4_map *map4; +#if IS_ENABLED(CONFIG_IPV6) + struct netlbl_af6list *iter6; + struct netlbl_domaddr6_map *map6; +#endif /* IPv6 */ + + if (entry == NULL) + return -EINVAL; + + switch (entry->type) { + case NETLBL_NLTYPE_UNLABELED: + if (entry->type_def.cipsov4 != NULL || + entry->type_def.addrsel != NULL) + return -EINVAL; + break; + case NETLBL_NLTYPE_CIPSOV4: + if (entry->type_def.cipsov4 == NULL) + return -EINVAL; + break; + case NETLBL_NLTYPE_ADDRSELECT: + netlbl_af4list_foreach(iter4, &entry->type_def.addrsel->list4) { + map4 = netlbl_domhsh_addr4_entry(iter4); + switch (map4->type) { + case NETLBL_NLTYPE_UNLABELED: + if (map4->type_def.cipsov4 != NULL) + return -EINVAL; + break; + case NETLBL_NLTYPE_CIPSOV4: + if (map4->type_def.cipsov4 == NULL) + return -EINVAL; + break; + default: + return -EINVAL; + } + } +#if IS_ENABLED(CONFIG_IPV6) + netlbl_af6list_foreach(iter6, &entry->type_def.addrsel->list6) { + map6 = netlbl_domhsh_addr6_entry(iter6); + switch (map6->type) { + case NETLBL_NLTYPE_UNLABELED: + break; + default: + return -EINVAL; + } + } +#endif /* IPv6 */ + break; + default: + return -EINVAL; + } + + return 0; +} + /* * Domain Hash Table Functions */ @@ -311,6 +376,10 @@ int netlbl_domhsh_add(struct netlbl_dom_map *entry, struct netlbl_af6list *tmp6; #endif /* IPv6 */ + ret_val = netlbl_domhsh_validate(entry); + if (ret_val != 0) + return ret_val; + /* XXX - we can remove this RCU read lock as the spinlock protects the * entire function, but before we do we need to fixup the * netlbl_af[4,6]list RCU functions to do "the right thing" with -- cgit v0.10.2 From ff0102ee104847023c36357e2b9f133f3f40d211 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Thu, 16 May 2013 23:13:04 +0000 Subject: net: irda: using kzalloc() instead of kmalloc() to avoid strncpy() issue. 'discovery->data.info' length is 22, NICKNAME_MAX_LEN is 21, so the strncpy() will always left the last byte of 'discovery->data.info' uninitialized. When 'text' length is longer than 21 (NICKNAME_MAX_LEN), if still left the last byte of 'discovery->data.info' uninitialized, the next strlen() will cause issue. Also 'discovery->data' is 'struct irda_device_info' which defined in "include/uapi/...", it may copy to user mode, so need whole initialized. All together, need use kzalloc() instead of kmalloc() to initialize all members firstly. Signed-off-by: Chen Gang Signed-off-by: David S. Miller diff --git a/net/irda/irlap_frame.c b/net/irda/irlap_frame.c index 8c00416..9ea0c93 100644 --- a/net/irda/irlap_frame.c +++ b/net/irda/irlap_frame.c @@ -544,7 +544,7 @@ static void irlap_recv_discovery_xid_cmd(struct irlap_cb *self, /* * We now have some discovery info to deliver! */ - discovery = kmalloc(sizeof(discovery_t), GFP_ATOMIC); + discovery = kzalloc(sizeof(discovery_t), GFP_ATOMIC); if (!discovery) { IRDA_WARNING("%s: unable to malloc!\n", __func__); return; -- cgit v0.10.2 From 35513171eed4d7245e81d926d311e74f3dca06f3 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Wed, 15 May 2013 20:18:37 +0530 Subject: ARM: OMAP2+: hwmod: Fix sidle programming in _enable_sysc()/_idle_sysc() _enable_sysc() and _idle_sysc() handle the midle mode programming correctly and program HWMOD_IDLEMODE_SMART or HWMOD_IDLEMODE_SMART_WKUP respectively for supported IPs (The ones which support hardware controlled midle modes) However the same programming logic is missing when it comes to sidle mode programming. Here they seem to just set HWMOD_IDLEMODE_SMART (Again for the ones which support hardware controlled sidle modes) This problem was hidden due to the fact that a call to _enable_wakeup() in those same functions would overwrite the idlemodes and program them correctly (to HWMOD_IDLEMODE_SMART_WKUP in the supported cases) So fix the sidlemode handling correctly in these functions and handle the _enable_wakeup() for SIDLEMODE supported IPs same as the way its handled for MIDLEMODE supported ones. Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra Nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index d25a95f..c28552b 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1356,13 +1356,26 @@ static void _enable_sysc(struct omap_hwmod *oh) clkdm = _get_clkdm(oh); if (sf & SYSC_HAS_SIDLEMODE) { + if (oh->flags & HWMOD_SWSUP_SIDLE) { + idlemode = HWMOD_IDLEMODE_NO; + } else { + if (sf & SYSC_HAS_ENAWAKEUP) + _enable_wakeup(oh, &v); + if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) + idlemode = HWMOD_IDLEMODE_SMART_WKUP; + else + idlemode = HWMOD_IDLEMODE_SMART; + } + + /* + * This is special handling for some IPs like + * 32k sync timer. Force them to idle! + */ clkdm_act = (clkdm && clkdm->flags & CLKDM_ACTIVE_WITH_MPU); if (clkdm_act && !(oh->class->sysc->idlemodes & (SIDLE_SMART | SIDLE_SMART_WKUP))) idlemode = HWMOD_IDLEMODE_FORCE; - else - idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ? - HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART; + _set_slave_idlemode(oh, idlemode, &v); } @@ -1391,10 +1404,6 @@ static void _enable_sysc(struct omap_hwmod *oh) (sf & SYSC_HAS_CLOCKACTIVITY)) _set_clockactivity(oh, oh->class->sysc->clockact, &v); - /* If slave is in SMARTIDLE, also enable wakeup */ - if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE)) - _enable_wakeup(oh, &v); - _write_sysconfig(v, oh); /* @@ -1430,13 +1439,16 @@ static void _idle_sysc(struct omap_hwmod *oh) sf = oh->class->sysc->sysc_flags; if (sf & SYSC_HAS_SIDLEMODE) { - /* XXX What about HWMOD_IDLEMODE_SMART_WKUP? */ - if (oh->flags & HWMOD_SWSUP_SIDLE || - !(oh->class->sysc->idlemodes & - (SIDLE_SMART | SIDLE_SMART_WKUP))) + if (oh->flags & HWMOD_SWSUP_SIDLE) { idlemode = HWMOD_IDLEMODE_FORCE; - else - idlemode = HWMOD_IDLEMODE_SMART; + } else { + if (sf & SYSC_HAS_ENAWAKEUP) + _enable_wakeup(oh, &v); + if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) + idlemode = HWMOD_IDLEMODE_SMART_WKUP; + else + idlemode = HWMOD_IDLEMODE_SMART; + } _set_slave_idlemode(oh, idlemode, &v); } @@ -1455,10 +1467,6 @@ static void _idle_sysc(struct omap_hwmod *oh) _set_master_standbymode(oh, idlemode, &v); } - /* If slave is in SMARTIDLE, also enable wakeup */ - if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE)) - _enable_wakeup(oh, &v); - _write_sysconfig(v, oh); } -- cgit v0.10.2 From ca43ea345de96dc214be790b6cebedbdfe110b63 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Wed, 15 May 2013 20:18:38 +0530 Subject: ARM: OMAP2+: hwmod: Add a new flag to handle SIDLE in SWSUP only in active Some IPs (like UART) need the sidle mode to be controlled in SW only while they are active. Once they go inactive, they need the IP to be put back in HW control so they are also wakeup capable. The flag HWMOD_SWSUP_SIDLE takes care of IPs which need the sidle mode to be *always* controlled in SWSUP. We now have a need to control IPs sidle mode in SWSUP only while its active. So define a new flag 'HWMOD_SWSUP_SIDLE_ACT' to help the framework know about these new IP requirements. Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra Nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index c28552b..5739429 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1356,7 +1356,8 @@ static void _enable_sysc(struct omap_hwmod *oh) clkdm = _get_clkdm(oh); if (sf & SYSC_HAS_SIDLEMODE) { - if (oh->flags & HWMOD_SWSUP_SIDLE) { + if (oh->flags & HWMOD_SWSUP_SIDLE || + oh->flags & HWMOD_SWSUP_SIDLE_ACT) { idlemode = HWMOD_IDLEMODE_NO; } else { if (sf & SYSC_HAS_ENAWAKEUP) diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index fe59629..8498774 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -463,6 +463,9 @@ struct omap_hwmod_omap4_prcm { * is kept in force-standby mode. Failing to do so causes PM problems * with musb on OMAP3630 at least. Note that musb has a dedicated register * to control MSTANDBY signal when MIDLEMODE is set to force-standby. + * HWMOD_SWSUP_SIDLE_ACT: omap_hwmod code should manually bring the module + * out of idle, but rely on smart-idle to the put it back in idle, + * so the wakeups are still functional (Only known case for now is UART) */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -476,6 +479,7 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_EXT_OPT_MAIN_CLK (1 << 9) #define HWMOD_BLOCK_WFI (1 << 10) #define HWMOD_FORCE_MSTANDBY (1 << 11) +#define HWMOD_SWSUP_SIDLE_ACT (1 << 12) /* * omap_hwmod._int_flags definitions -- cgit v0.10.2 From 66dde54e978a310c57a40023ff39835fa5ccd7a3 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Wed, 15 May 2013 20:18:39 +0530 Subject: ARM: OMAP2+: hwmod-data: UART IP needs software control to manage sidle modes OMAP UART IP needs software control for slave idle modes based on functional state of the IP. i.e The IP slave idle settings should be set to 'noidle' when being used and then put back to 'smart_idle' when unused. Currently this is handled by the driver with function pointers implemented in platform code. This however breaks in case of device tree because of missing idle handling APIs. Previous patches in this series added a flag HWMOD_SWSUP_SIDLE_ACTIVE which takes care of the mentioned requirement. Hence add the flag for all UART IPs to take advantage of feature supported by framework. Subsequent patches removes the slave idle handling from driver code. Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra Nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index c8c64b3..d05fc7b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -512,6 +512,7 @@ struct omap_hwmod omap2xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -531,6 +532,7 @@ struct omap_hwmod omap2xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -550,6 +552,7 @@ struct omap_hwmod omap2xxx_uart3_hwmod = { .mpu_irqs = omap2_uart3_mpu_irqs, .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 01d8f32..075f7cc 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -1995,6 +1995,7 @@ static struct omap_hwmod am33xx_uart1_hwmod = { .name = "uart1", .class = &uart_class, .clkdm_name = "l4_wkup_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart1_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_wkupdm_ck", @@ -2015,6 +2016,7 @@ static struct omap_hwmod am33xx_uart2_hwmod = { .name = "uart2", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart2_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2042,6 +2044,7 @@ static struct omap_hwmod am33xx_uart3_hwmod = { .name = "uart3", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart3_irqs, .sdma_reqs = uart3_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2062,6 +2065,7 @@ static struct omap_hwmod am33xx_uart4_hwmod = { .name = "uart4", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart4_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2082,6 +2086,7 @@ static struct omap_hwmod am33xx_uart5_hwmod = { .name = "uart5", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart5_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2102,6 +2107,7 @@ static struct omap_hwmod am33xx_uart6_hwmod = { .name = "uart6", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart6_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 4083606..31c7126 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -490,6 +490,7 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -508,6 +509,7 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -526,6 +528,7 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = { .mpu_irqs = omap2_uart3_mpu_irqs, .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, @@ -555,6 +558,7 @@ static struct omap_hwmod omap36xx_uart4_hwmod = { .mpu_irqs = uart4_mpu_irqs, .sdma_reqs = uart4_sdma_reqs, .main_clk = "uart4_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index eaba9dc..848b6dc 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -3434,6 +3434,7 @@ static struct omap_hwmod omap44xx_uart1_hwmod = { .name = "uart1", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart1_irqs, .sdma_reqs = omap44xx_uart1_sdma_reqs, .main_clk = "func_48m_fclk", @@ -3462,6 +3463,7 @@ static struct omap_hwmod omap44xx_uart2_hwmod = { .name = "uart2", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart2_irqs, .sdma_reqs = omap44xx_uart2_sdma_reqs, .main_clk = "func_48m_fclk", @@ -3490,7 +3492,8 @@ static struct omap_hwmod omap44xx_uart3_hwmod = { .name = "uart3", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, + .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET | + HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart3_irqs, .sdma_reqs = omap44xx_uart3_sdma_reqs, .main_clk = "func_48m_fclk", @@ -3519,6 +3522,7 @@ static struct omap_hwmod omap44xx_uart4_hwmod = { .name = "uart4", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart4_irqs, .sdma_reqs = omap44xx_uart4_sdma_reqs, .main_clk = "func_48m_fclk", -- cgit v0.10.2 From e59cd225c0ad280122cb69e04cd66699557875a4 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Wed, 15 May 2013 20:18:40 +0530 Subject: ARM: OMAP2+: serial: Remove the un-used slave idle hooks UART IP idle handling now taken care by runtime pm backend(hwmod) indirectly and OMAP serial driver is also cleaned up accordingly. So remove the un-used slave idle platforms hooks now. Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 8396b5b..f660156 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -95,38 +95,9 @@ static void omap_uart_enable_wakeup(struct device *dev, bool enable) omap_hwmod_disable_wakeup(od->hwmods[0]); } -/* - * Errata i291: [UART]:Cannot Acknowledge Idle Requests - * in Smartidle Mode When Configured for DMA Operations. - * WA: configure uart in force idle mode. - */ -static void omap_uart_set_noidle(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_device *od = to_omap_device(pdev); - - omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO); -} - -static void omap_uart_set_smartidle(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_device *od = to_omap_device(pdev); - u8 idlemode; - - if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP) - idlemode = HWMOD_IDLEMODE_SMART_WKUP; - else - idlemode = HWMOD_IDLEMODE_SMART; - - omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode); -} - #else static void omap_uart_enable_wakeup(struct device *dev, bool enable) {} -static void omap_uart_set_noidle(struct device *dev) {} -static void omap_uart_set_smartidle(struct device *dev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX @@ -299,8 +270,6 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, omap_up.uartclk = OMAP24XX_BASE_BAUD * 16; omap_up.flags = UPF_BOOT_AUTOCONF; omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count; - omap_up.set_forceidle = omap_uart_set_smartidle; - omap_up.set_noidle = omap_uart_set_noidle; omap_up.enable_wakeup = omap_uart_enable_wakeup; omap_up.dma_rx_buf_size = info->dma_rx_buf_size; omap_up.dma_rx_timeout = info->dma_rx_timeout; -- cgit v0.10.2 From 7f18d05a1af75142d4856a91ffd2f1d8eb553c12 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Wed, 15 May 2013 20:18:41 +0530 Subject: SERIAL: OMAP: Remove the slave idle handling from the driver UART IP slave idle handling now taken care by runtime pm backend(hwmod layer) so remove the hackery from the driver. As discussed on the list, in future if dma mode needs to be brought back to this driver, UART sysc handling needs to be updated in framework such a way that no-idle/force idle profile can be supported. Given the broken dma mode for OMAP uarts, its very unlikely. Acked-by: Greg Kroah-Hartman Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 30d4f7a..f0b9f6b 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -202,26 +202,6 @@ static int serial_omap_get_context_loss_count(struct uart_omap_port *up) return pdata->get_context_loss_count(up->dev); } -static void serial_omap_set_forceidle(struct uart_omap_port *up) -{ - struct omap_uart_port_info *pdata = up->dev->platform_data; - - if (!pdata || !pdata->set_forceidle) - return; - - pdata->set_forceidle(up->dev); -} - -static void serial_omap_set_noidle(struct uart_omap_port *up) -{ - struct omap_uart_port_info *pdata = up->dev->platform_data; - - if (!pdata || !pdata->set_noidle) - return; - - pdata->set_noidle(up->dev); -} - static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable) { struct omap_uart_port_info *pdata = up->dev->platform_data; @@ -298,8 +278,6 @@ static void serial_omap_stop_tx(struct uart_port *port) serial_out(up, UART_IER, up->ier); } - serial_omap_set_forceidle(up); - pm_runtime_mark_last_busy(up->dev); pm_runtime_put_autosuspend(up->dev); } @@ -364,7 +342,6 @@ static void serial_omap_start_tx(struct uart_port *port) pm_runtime_get_sync(up->dev); serial_omap_enable_ier_thri(up); - serial_omap_set_noidle(up); pm_runtime_mark_last_busy(up->dev); pm_runtime_put_autosuspend(up->dev); } diff --git a/include/linux/platform_data/serial-omap.h b/include/linux/platform_data/serial-omap.h index ff9b0aa..c860c1b 100644 --- a/include/linux/platform_data/serial-omap.h +++ b/include/linux/platform_data/serial-omap.h @@ -43,8 +43,6 @@ struct omap_uart_port_info { int DTR_present; int (*get_context_loss_count)(struct device *); - void (*set_forceidle)(struct device *); - void (*set_noidle)(struct device *); void (*enable_wakeup)(struct device *, bool); }; -- cgit v0.10.2 From 3260c76055afc6c9396e5ad9f9e599505ea8891f Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Wed, 15 May 2013 20:18:42 +0530 Subject: ARM: OMAP2+: hwmod: Remove sysc slave idle and auto idle apis With the OMAP serial driver sysc cleanup patches in this series, we can now remove the hwmod external apis for sysc fiddling. While at this, also remove unused sysc auto idle api from hwmod code. Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 5739429..0393142 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2255,42 +2255,6 @@ static int _idle(struct omap_hwmod *oh) } /** - * omap_hwmod_set_ocp_autoidle - set the hwmod's OCP autoidle bit - * @oh: struct omap_hwmod * - * @autoidle: desired AUTOIDLE bitfield value (0 or 1) - * - * Sets the IP block's OCP autoidle bit in hardware, and updates our - * local copy. Intended to be used by drivers that require - * direct manipulation of the AUTOIDLE bits. - * Returns -EINVAL if @oh is null or is not in the ENABLED state, or passes - * along the return value from _set_module_autoidle(). - * - * Any users of this function should be scrutinized carefully. - */ -int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle) -{ - u32 v; - int retval = 0; - unsigned long flags; - - if (!oh || oh->_state != _HWMOD_STATE_ENABLED) - return -EINVAL; - - spin_lock_irqsave(&oh->_lock, flags); - - v = oh->_sysc_cache; - - retval = _set_module_autoidle(oh, autoidle, &v); - - if (!retval) - _write_sysconfig(v, oh); - - spin_unlock_irqrestore(&oh->_lock, flags); - - return retval; -} - -/** * _shutdown - shutdown an omap_hwmod * @oh: struct omap_hwmod * * @@ -3189,38 +3153,6 @@ error: } /** - * omap_hwmod_set_slave_idlemode - set the hwmod's OCP slave idlemode - * @oh: struct omap_hwmod * - * @idlemode: SIDLEMODE field bits (shifted to bit 0) - * - * Sets the IP block's OCP slave idlemode in hardware, and updates our - * local copy. Intended to be used by drivers that have some erratum - * that requires direct manipulation of the SIDLEMODE bits. Returns - * -EINVAL if @oh is null, or passes along the return value from - * _set_slave_idlemode(). - * - * XXX Does this function have any current users? If not, we should - * remove it; it is better to let the rest of the hwmod code handle this. - * Any users of this function should be scrutinized carefully. - */ -int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode) -{ - u32 v; - int retval = 0; - - if (!oh) - return -EINVAL; - - v = oh->_sysc_cache; - - retval = _set_slave_idlemode(oh, idlemode, &v); - if (!retval) - _write_sysconfig(v, oh); - - return retval; -} - -/** * omap_hwmod_lookup - look up a registered omap_hwmod by name * @name: name of the omap_hwmod to look up * diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 8498774..0c898f5 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -645,9 +645,6 @@ int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name); int omap_hwmod_enable_clocks(struct omap_hwmod *oh); int omap_hwmod_disable_clocks(struct omap_hwmod *oh); -int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode); -int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle); - int omap_hwmod_reset(struct omap_hwmod *oh); void omap_hwmod_ocp_barrier(struct omap_hwmod *oh); -- cgit v0.10.2 From d2f83e9078b8114e3b9d09082856c1aac299aa37 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 17 May 2013 09:05:21 +0930 Subject: Hoist memcpy_fromiovec/memcpy_toiovec into lib/ ERROR: "memcpy_fromiovec" [drivers/vhost/vhost_scsi.ko] undefined! That function is only present with CONFIG_NET. Turns out that crypto/algif_skcipher.c also uses that outside net, but it actually needs sockets anyway. In addition, commit 6d4f0139d642c45411a47879325891ce2a7c164a added CONFIG_NET dependency to CONFIG_VMCI for memcpy_toiovec, so hoist that function and revert that commit too. socket.h already includes uio.h, so no callers need updating; trying only broke things fo x86_64 randconfig (thanks Fengguang!). Reported-by: Randy Dunlap Acked-by: David S. Miller Acked-by: Michael S. Tsirkin Signed-off-by: Rusty Russell diff --git a/drivers/misc/vmw_vmci/Kconfig b/drivers/misc/vmw_vmci/Kconfig index ea98f7e..39c2eca 100644 --- a/drivers/misc/vmw_vmci/Kconfig +++ b/drivers/misc/vmw_vmci/Kconfig @@ -4,7 +4,7 @@ config VMWARE_VMCI tristate "VMware VMCI Driver" - depends on X86 && PCI && NET + depends on X86 && PCI help This is VMware's Virtual Machine Communication Interface. It enables high-speed communication between host and guest in a virtual diff --git a/drivers/misc/vmw_vmci/vmci_queue_pair.c b/drivers/misc/vmw_vmci/vmci_queue_pair.c index d94245d..8ff2e5e 100644 --- a/drivers/misc/vmw_vmci/vmci_queue_pair.c +++ b/drivers/misc/vmw_vmci/vmci_queue_pair.c @@ -23,7 +23,7 @@ #include #include #include -#include +#include #include #include diff --git a/include/linux/socket.h b/include/linux/socket.h index 428c37a..33bf2df 100644 --- a/include/linux/socket.h +++ b/include/linux/socket.h @@ -305,7 +305,6 @@ struct ucred { extern void cred_to_ucred(struct pid *pid, const struct cred *cred, struct ucred *ucred); -extern int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len); extern int memcpy_fromiovecend(unsigned char *kdata, const struct iovec *iov, int offset, int len); extern int csum_partial_copy_fromiovecend(unsigned char *kdata, @@ -314,7 +313,6 @@ extern int csum_partial_copy_fromiovecend(unsigned char *kdata, unsigned int len, __wsum *csump); extern int verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr_storage *address, int mode); -extern int memcpy_toiovec(struct iovec *v, unsigned char *kdata, int len); extern int memcpy_toiovecend(const struct iovec *v, unsigned char *kdata, int offset, int len); extern int move_addr_to_kernel(void __user *uaddr, int ulen, struct sockaddr_storage *kaddr); diff --git a/include/linux/uio.h b/include/linux/uio.h index 629aaf5..c55ce24 100644 --- a/include/linux/uio.h +++ b/include/linux/uio.h @@ -35,4 +35,7 @@ static inline size_t iov_length(const struct iovec *iov, unsigned long nr_segs) } unsigned long iov_shorten(struct iovec *iov, unsigned long nr_segs, size_t to); + +int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len); +int memcpy_toiovec(struct iovec *iov, unsigned char *kdata, int len); #endif diff --git a/lib/Makefile b/lib/Makefile index e9c52e1..2377211 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -9,7 +9,7 @@ endif lib-y := ctype.o string.o vsprintf.o cmdline.o \ rbtree.o radix-tree.o dump_stack.o timerqueue.o\ - idr.o int_sqrt.o extable.o \ + idr.o int_sqrt.o extable.o iovec.o \ sha1.o md5.o irq_regs.o reciprocal_div.o argv_split.o \ proportions.o flex_proportions.o prio_heap.o ratelimit.o show_mem.o \ is_single_threaded.o plist.o decompress.o kobject_uevent.o \ diff --git a/lib/iovec.c b/lib/iovec.c new file mode 100644 index 0000000..454baa8 --- /dev/null +++ b/lib/iovec.c @@ -0,0 +1,53 @@ +#include +#include +#include + +/* + * Copy iovec to kernel. Returns -EFAULT on error. + * + * Note: this modifies the original iovec. + */ + +int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len) +{ + while (len > 0) { + if (iov->iov_len) { + int copy = min_t(unsigned int, len, iov->iov_len); + if (copy_from_user(kdata, iov->iov_base, copy)) + return -EFAULT; + len -= copy; + kdata += copy; + iov->iov_base += copy; + iov->iov_len -= copy; + } + iov++; + } + + return 0; +} +EXPORT_SYMBOL(memcpy_fromiovec); + +/* + * Copy kernel to iovec. Returns -EFAULT on error. + * + * Note: this modifies the original iovec. + */ + +int memcpy_toiovec(struct iovec *iov, unsigned char *kdata, int len) +{ + while (len > 0) { + if (iov->iov_len) { + int copy = min_t(unsigned int, iov->iov_len, len); + if (copy_to_user(iov->iov_base, kdata, copy)) + return -EFAULT; + kdata += copy; + len -= copy; + iov->iov_len -= copy; + iov->iov_base += copy; + } + iov++; + } + + return 0; +} +EXPORT_SYMBOL(memcpy_toiovec); diff --git a/net/core/iovec.c b/net/core/iovec.c index 7e7aeb0..de178e4 100644 --- a/net/core/iovec.c +++ b/net/core/iovec.c @@ -75,31 +75,6 @@ int verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr_storage *a /* * Copy kernel to iovec. Returns -EFAULT on error. - * - * Note: this modifies the original iovec. - */ - -int memcpy_toiovec(struct iovec *iov, unsigned char *kdata, int len) -{ - while (len > 0) { - if (iov->iov_len) { - int copy = min_t(unsigned int, iov->iov_len, len); - if (copy_to_user(iov->iov_base, kdata, copy)) - return -EFAULT; - kdata += copy; - len -= copy; - iov->iov_len -= copy; - iov->iov_base += copy; - } - iov++; - } - - return 0; -} -EXPORT_SYMBOL(memcpy_toiovec); - -/* - * Copy kernel to iovec. Returns -EFAULT on error. */ int memcpy_toiovecend(const struct iovec *iov, unsigned char *kdata, @@ -125,31 +100,6 @@ int memcpy_toiovecend(const struct iovec *iov, unsigned char *kdata, EXPORT_SYMBOL(memcpy_toiovecend); /* - * Copy iovec to kernel. Returns -EFAULT on error. - * - * Note: this modifies the original iovec. - */ - -int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len) -{ - while (len > 0) { - if (iov->iov_len) { - int copy = min_t(unsigned int, len, iov->iov_len); - if (copy_from_user(kdata, iov->iov_base, copy)) - return -EFAULT; - len -= copy; - kdata += copy; - iov->iov_base += copy; - iov->iov_len -= copy; - } - iov++; - } - - return 0; -} -EXPORT_SYMBOL(memcpy_fromiovec); - -/* * Copy iovec from kernel. Returns -EFAULT on error. */ -- cgit v0.10.2 From 6407d75afd08545f2252bb39806ffd3f10c7faac Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Fri, 17 May 2013 10:44:15 +0930 Subject: virtio_console: fix uapi header uapi should use __u32 not u32. Fix a macro in virtio_console.h which uses u32. Signed-off-by: Michael S. Tsirkin Signed-off-by: Rusty Russell Cc: stable@kernel.org diff --git a/include/uapi/linux/virtio_console.h b/include/uapi/linux/virtio_console.h index ee13ab6..c312f16 100644 --- a/include/uapi/linux/virtio_console.h +++ b/include/uapi/linux/virtio_console.h @@ -39,7 +39,7 @@ #define VIRTIO_CONSOLE_F_SIZE 0 /* Does host provide console size? */ #define VIRTIO_CONSOLE_F_MULTIPORT 1 /* Does host provide multiple ports? */ -#define VIRTIO_CONSOLE_BAD_ID (~(u32)0) +#define VIRTIO_CONSOLE_BAD_ID (~(__u32)0) struct virtio_console_config { /* colums of the screens */ -- cgit v0.10.2 From c5e624f8437331e1d985b4bb5efe3c4229569550 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 3 May 2013 06:40:37 +1000 Subject: drm/nouveau: fix build with nv50->nvc0 Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/nouveau/core/engine/device/nve0.c b/drivers/gpu/drm/nouveau/core/engine/device/nve0.c index 08f7b52..a354e40 100644 --- a/drivers/gpu/drm/nouveau/core/engine/device/nve0.c +++ b/drivers/gpu/drm/nouveau/core/engine/device/nve0.c @@ -149,7 +149,7 @@ nve0_identify(struct nouveau_device *device) device->oclass[NVDEV_SUBDEV_CLOCK ] = &nvc0_clock_oclass; device->oclass[NVDEV_SUBDEV_THERM ] = &nvd0_therm_oclass; device->oclass[NVDEV_SUBDEV_MXM ] = &nv50_mxm_oclass; - device->oclass[NVDEV_SUBDEV_DEVINIT] = &nvc0_devinit_oclass; + device->oclass[NVDEV_SUBDEV_DEVINIT] = &nv50_devinit_oclass; device->oclass[NVDEV_SUBDEV_MC ] = &nvc0_mc_oclass; device->oclass[NVDEV_SUBDEV_BUS ] = &nvc0_bus_oclass; device->oclass[NVDEV_SUBDEV_TIMER ] = &nv04_timer_oclass; -- cgit v0.10.2 From 46b47b8a7d9223b12ddcabf1f3fc6e753e2d84a1 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 7 May 2013 15:54:13 +1000 Subject: drm/nouveau/bios: fix thinko in ZM_MASK_ADD opcode Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/init.c b/drivers/gpu/drm/nouveau/core/subdev/bios/init.c index c300b5e..c434d39 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/bios/init.c +++ b/drivers/gpu/drm/nouveau/core/subdev/bios/init.c @@ -1940,8 +1940,8 @@ init_zm_mask_add(struct nvbios_init *init) trace("ZM_MASK_ADD\tR[0x%06x] &= 0x%08x += 0x%08x\n", addr, mask, add); init->offset += 13; - data = init_rd32(init, addr) & mask; - data |= ((data + add) & ~mask); + data = init_rd32(init, addr); + data = (data & mask) | ((data + add) & ~mask); init_wr32(init, addr, data); } -- cgit v0.10.2 From 6d5f83834dc2b064b8c1202ea281820286b675a8 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 13 May 2013 16:11:12 +1000 Subject: drm/nvc0/ce: disable ce1 on a number of chipsets The falcon is present, but the rest of the copy engine doesn't appear to be... PUNITS doesn't report disabled (maybe the bits for the copy engines got added later?), so we end up trying to use a non-functional CE1, and bust all sorts of things.. Most notably, suspend/resume.. Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/engine/device/nvc0.c b/drivers/gpu/drm/nouveau/core/engine/device/nvc0.c index 955af12..a36e64e 100644 --- a/drivers/gpu/drm/nouveau/core/engine/device/nvc0.c +++ b/drivers/gpu/drm/nouveau/core/engine/device/nvc0.c @@ -138,7 +138,6 @@ nvc0_identify(struct nouveau_device *device) device->oclass[NVDEV_ENGINE_BSP ] = &nvc0_bsp_oclass; device->oclass[NVDEV_ENGINE_PPP ] = &nvc0_ppp_oclass; device->oclass[NVDEV_ENGINE_COPY0 ] = &nvc0_copy0_oclass; - device->oclass[NVDEV_ENGINE_COPY1 ] = &nvc0_copy1_oclass; device->oclass[NVDEV_ENGINE_DISP ] = &nva3_disp_oclass; break; case 0xce: @@ -225,7 +224,6 @@ nvc0_identify(struct nouveau_device *device) device->oclass[NVDEV_ENGINE_BSP ] = &nvc0_bsp_oclass; device->oclass[NVDEV_ENGINE_PPP ] = &nvc0_ppp_oclass; device->oclass[NVDEV_ENGINE_COPY0 ] = &nvc0_copy0_oclass; - device->oclass[NVDEV_ENGINE_COPY1 ] = &nvc0_copy1_oclass; device->oclass[NVDEV_ENGINE_DISP ] = &nva3_disp_oclass; break; case 0xc8: -- cgit v0.10.2 From 49debbe4540efd08b4e9a1c499dce392a43bf1ed Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 14 May 2013 11:37:18 +1000 Subject: drm/nvc0/ltcg: fix handling of disabled partitions Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/subdev/ltcg/nvc0.c b/drivers/gpu/drm/nouveau/core/subdev/ltcg/nvc0.c index e4940fb..7c6194f 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/ltcg/nvc0.c +++ b/drivers/gpu/drm/nouveau/core/subdev/ltcg/nvc0.c @@ -29,7 +29,6 @@ struct nvc0_ltcg_priv { struct nouveau_ltcg base; u32 part_nr; - u32 part_mask; u32 subp_nr; struct nouveau_mm tags; u32 num_tags; @@ -105,8 +104,6 @@ nvc0_ltcg_tags_clear(struct nouveau_ltcg *ltcg, u32 first, u32 count) /* wait until it's finished with clearing */ for (p = 0; p < priv->part_nr; ++p) { - if (!(priv->part_mask & (1 << p))) - continue; for (i = 0; i < priv->subp_nr; ++i) nv_wait(priv, 0x1410c8 + p * 0x2000 + i * 0x400, ~0, 0); } @@ -167,16 +164,20 @@ nvc0_ltcg_ctor(struct nouveau_object *parent, struct nouveau_object *engine, { struct nvc0_ltcg_priv *priv; struct nouveau_fb *pfb = nouveau_fb(parent); - int ret; + u32 parts, mask; + int ret, i; ret = nouveau_ltcg_create(parent, engine, oclass, &priv); *pobject = nv_object(priv); if (ret) return ret; - priv->part_nr = nv_rd32(priv, 0x022438); - priv->part_mask = nv_rd32(priv, 0x022554); - + parts = nv_rd32(priv, 0x022438); + mask = nv_rd32(priv, 0x022554); + for (i = 0; i < parts; i++) { + if (!(mask & (1 << i))) + priv->part_nr++; + } priv->subp_nr = nv_rd32(priv, 0x17e8dc) >> 28; nv_mask(priv, 0x17e820, 0x00100000, 0x00000000); /* INTR_EN &= ~0x10 */ -- cgit v0.10.2 From fe6fc096b82eb0e84a0609f6431f7069f6c6c347 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 14 May 2013 12:03:33 +1000 Subject: drm/nve0/ltcg: poke the partition count into yet another register Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/subdev/ltcg/nvc0.c b/drivers/gpu/drm/nouveau/core/subdev/ltcg/nvc0.c index 7c6194f..fb794e9 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/ltcg/nvc0.c +++ b/drivers/gpu/drm/nouveau/core/subdev/ltcg/nvc0.c @@ -118,6 +118,8 @@ nvc0_ltcg_init_tag_ram(struct nouveau_fb *pfb, struct nvc0_ltcg_priv *priv) int ret; nv_wr32(priv, 0x17e8d8, priv->part_nr); + if (nv_device(pfb)->card_type >= NV_E0) + nv_wr32(priv, 0x17e000, priv->part_nr); /* tags for 1/4 of VRAM should be enough (8192/4 per GiB of VRAM) */ priv->num_tags = (pfb->ram.size >> 17) / 4; -- cgit v0.10.2 From c2e3259b7b6c89686892e4fbcc56dbcab14f1acf Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 6 May 2013 13:54:50 +1000 Subject: drm/nve0/fifo: prevent races between clients updating playlists Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c b/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c index 9151919..56192a7 100644 --- a/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c +++ b/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c @@ -94,11 +94,13 @@ nve0_fifo_playlist_update(struct nve0_fifo_priv *priv, u32 engine) u32 match = (engine << 16) | 0x00000001; int i, p; + mutex_lock(&nv_subdev(priv)->mutex); cur = engn->playlist[engn->cur_playlist]; if (unlikely(cur == NULL)) { int ret = nouveau_gpuobj_new(nv_object(priv), NULL, 0x8000, 0x1000, 0, &cur); if (ret) { + mutex_unlock(&nv_subdev(priv)->mutex); nv_error(priv, "playlist alloc failed\n"); return; } @@ -122,6 +124,7 @@ nve0_fifo_playlist_update(struct nve0_fifo_priv *priv, u32 engine) nv_wr32(priv, 0x002274, (engine << 20) | (p >> 3)); if (!nv_wait(priv, 0x002284 + (engine * 4), 0x00100000, 0x00000000)) nv_error(priv, "playlist %d update timeout\n", engine); + mutex_unlock(&nv_subdev(priv)->mutex); } static int -- cgit v0.10.2 From fadb171902df5c6ba38029a9306c2b0d559987b9 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 13 May 2013 10:02:11 +1000 Subject: drm/nvc0/fifo: prevent races between clients updating playlists Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/engine/fifo/nvc0.c b/drivers/gpu/drm/nouveau/core/engine/fifo/nvc0.c index 4d4a6b9..1613193 100644 --- a/drivers/gpu/drm/nouveau/core/engine/fifo/nvc0.c +++ b/drivers/gpu/drm/nouveau/core/engine/fifo/nvc0.c @@ -71,6 +71,7 @@ nvc0_fifo_playlist_update(struct nvc0_fifo_priv *priv) struct nouveau_gpuobj *cur; int i, p; + mutex_lock(&nv_subdev(priv)->mutex); cur = priv->playlist[priv->cur_playlist]; priv->cur_playlist = !priv->cur_playlist; @@ -87,6 +88,7 @@ nvc0_fifo_playlist_update(struct nvc0_fifo_priv *priv) nv_wr32(priv, 0x002274, 0x01f00000 | (p >> 3)); if (!nv_wait(priv, 0x00227c, 0x00100000, 0x00000000)) nv_error(priv, "playlist update failed\n"); + mutex_unlock(&nv_subdev(priv)->mutex); } static int -- cgit v0.10.2 From 9426eedb26cfe646a843295ac7f91bf866323f92 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 13 May 2013 11:09:59 +1000 Subject: drm/nvc0/fifo: prevent CHAN_TABLE_ERROR:CHANNEL_PENDING on fifo fini Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/engine/fifo/nvc0.c b/drivers/gpu/drm/nouveau/core/engine/fifo/nvc0.c index 1613193..46dfa68 100644 --- a/drivers/gpu/drm/nouveau/core/engine/fifo/nvc0.c +++ b/drivers/gpu/drm/nouveau/core/engine/fifo/nvc0.c @@ -250,9 +250,17 @@ nvc0_fifo_chan_fini(struct nouveau_object *object, bool suspend) struct nvc0_fifo_priv *priv = (void *)object->engine; struct nvc0_fifo_chan *chan = (void *)object; u32 chid = chan->base.chid; + u32 mask, engine; nv_mask(priv, 0x003004 + (chid * 8), 0x00000001, 0x00000000); nvc0_fifo_playlist_update(priv); + mask = nv_rd32(priv, 0x0025a4); + for (engine = 0; mask && engine < 16; engine++) { + if (!(mask & (1 << engine))) + continue; + nv_mask(priv, 0x0025a8 + (engine * 4), 0x00000000, 0x00000000); + mask &= ~(1 << engine); + } nv_wr32(priv, 0x003000 + (chid * 8), 0x00000000); return nouveau_fifo_channel_fini(&chan->base, suspend); -- cgit v0.10.2 From b5096566f6e1ee2b88324772f020ae9bc0cfa9a0 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 14 May 2013 13:33:56 +1000 Subject: drm/nv50/fifo: prevent races between clients updating playlists Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c b/drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c index ddaeb55..89bf459 100644 --- a/drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c +++ b/drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c @@ -47,6 +47,7 @@ nv50_fifo_playlist_update(struct nv50_fifo_priv *priv) struct nouveau_gpuobj *cur; int i, p; + mutex_lock(&nv_subdev(priv)->mutex); cur = priv->playlist[priv->cur_playlist]; priv->cur_playlist = !priv->cur_playlist; @@ -60,6 +61,7 @@ nv50_fifo_playlist_update(struct nv50_fifo_priv *priv) nv_wr32(priv, 0x0032f4, cur->addr >> 12); nv_wr32(priv, 0x0032ec, p); nv_wr32(priv, 0x002500, 0x00000101); + mutex_unlock(&nv_subdev(priv)->mutex); } static int -- cgit v0.10.2 From 81dff21b643f48c14010a97ffc799e1920d751e5 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 7 May 2013 08:33:10 +1000 Subject: drm/nouveau: ensure channels are stopped before saving fences for suspend Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c index 46c152f..383f4e6 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.c +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c @@ -453,18 +453,32 @@ nouveau_do_suspend(struct drm_device *dev) NV_INFO(drm, "evicting buffers...\n"); ttm_bo_evict_mm(&drm->ttm.bdev, TTM_PL_VRAM); + NV_INFO(drm, "waiting for kernel channels to go idle...\n"); + if (drm->cechan) { + ret = nouveau_channel_idle(drm->cechan); + if (ret) + return ret; + } + + if (drm->channel) { + ret = nouveau_channel_idle(drm->channel); + if (ret) + return ret; + } + + NV_INFO(drm, "suspending client object trees...\n"); if (drm->fence && nouveau_fence(drm)->suspend) { if (!nouveau_fence(drm)->suspend(drm)) return -ENOMEM; } - NV_INFO(drm, "suspending client object trees...\n"); list_for_each_entry(cli, &drm->clients, head) { ret = nouveau_client_fini(&cli->base, true); if (ret) goto fail_client; } + NV_INFO(drm, "suspending kernel object tree...\n"); ret = nouveau_client_fini(&drm->client.base, true); if (ret) goto fail_client; @@ -514,17 +528,18 @@ nouveau_do_resume(struct drm_device *dev) nouveau_agp_reset(drm); - NV_INFO(drm, "resuming client object trees...\n"); + NV_INFO(drm, "resuming kernel object tree...\n"); nouveau_client_init(&drm->client.base); nouveau_agp_init(drm); + NV_INFO(drm, "resuming client object trees...\n"); + if (drm->fence && nouveau_fence(drm)->resume) + nouveau_fence(drm)->resume(drm); + list_for_each_entry(cli, &drm->clients, head) { nouveau_client_init(&cli->base); } - if (drm->fence && nouveau_fence(drm)->resume) - nouveau_fence(drm)->resume(drm); - nouveau_run_vbios_init(dev); nouveau_pm_resume(dev); -- cgit v0.10.2 From ea6836dd7ef9cfbed5dce421190009f9eed00b7e Mon Sep 17 00:00:00 2001 From: "nikolay@redhat.com" Date: Sat, 18 May 2013 01:18:28 +0000 Subject: bonding: fix set mode race conditions Changing the mode without any locking can result in multiple races (e.g. upping a bond, enslaving/releasing). Depending on which race is hit the impact can vary from incosistent bond state to kernel crash. Use RTNL to synchronize the mode setting with the dangerous races. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index ea7a388..77ea237 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -316,6 +316,9 @@ static ssize_t bonding_store_mode(struct device *d, int new_value, ret = count; struct bonding *bond = to_bond(d); + if (!rtnl_trylock()) + return restart_syscall(); + if (bond->dev->flags & IFF_UP) { pr_err("unable to update mode of %s because interface is up.\n", bond->dev->name); @@ -352,6 +355,7 @@ static ssize_t bonding_store_mode(struct device *d, bond->dev->name, bond_mode_tbl[new_value].modename, new_value); out: + rtnl_unlock(); return ret; } static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, -- cgit v0.10.2 From acca2674a71816c5c9d0caa81fecd33b491fd68f Mon Sep 17 00:00:00 2001 From: "nikolay@redhat.com" Date: Sat, 18 May 2013 01:18:29 +0000 Subject: bonding: replace %x with %pI4 for IPv4 addresses There're few pr_debug() places that can provide the IPv4 address in dotted decimal format instead which is more helpful. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 449ad9b..d463598 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2556,8 +2556,8 @@ static void bond_arp_send(struct net_device *slave_dev, int arp_op, __be32 dest_ { struct sk_buff *skb; - pr_debug("arp %d on slave %s: dst %x src %x vid %d\n", arp_op, - slave_dev->name, dest_ip, src_ip, vlan_id); + pr_debug("arp %d on slave %s: dst %pI4 src %pI4 vid %d\n", arp_op, + slave_dev->name, &dest_ip, &src_ip, vlan_id); skb = arp_create(arp_op, ETH_P_ARP, dest_ip, slave_dev, src_ip, NULL, slave_dev->dev_addr, NULL); @@ -2589,7 +2589,7 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave) __be32 addr; if (!targets[i]) break; - pr_debug("basa: target %x\n", targets[i]); + pr_debug("basa: target %pI4\n", &targets[i]); if (!bond_vlan_used(bond)) { pr_debug("basa: empty vlan: arp_send\n"); addr = bond_confirm_addr(bond->dev, targets[i], 0); -- cgit v0.10.2 From 5a5c5fd48e3bcd57572e9a7a4964ed8f38a20b87 Mon Sep 17 00:00:00 2001 From: "nikolay@redhat.com" Date: Sat, 18 May 2013 01:18:30 +0000 Subject: bonding: arp_ip_count and arp_targets can be wrong When getting arp_ip_targets if we encounter a bad IP, arp_ip_count still gets increased and all the targets after the wrong one will not be probed if arp_interval is enabled after that (unless a new IP target is added through sysfs) because of the zero entry, in this case reading arp_ip_target through sysfs will show valid targets even if there's a zero entry. Example: 1.2.3.4,4.5.6.7,blah,5.6.7.8 When retrieving the list from arp_ip_target the output would be: 1.2.3.4,4.5.6.7,5.6.7.8 but there will be a 0 entry between 4.5.6.7 and 5.6.7.8. If arp_interval is enabled after that 5.6.7.8 will never be checked because of that. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index d463598..29b846c 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4471,7 +4471,7 @@ int bond_parse_parm(const char *buf, const struct bond_parm_tbl *tbl) static int bond_check_params(struct bond_params *params) { - int arp_validate_value, fail_over_mac_value, primary_reselect_value; + int arp_validate_value, fail_over_mac_value, primary_reselect_value, i; /* * Convert string parameters. @@ -4651,19 +4651,18 @@ static int bond_check_params(struct bond_params *params) arp_interval = BOND_LINK_ARP_INTERV; } - for (arp_ip_count = 0; - (arp_ip_count < BOND_MAX_ARP_TARGETS) && arp_ip_target[arp_ip_count]; - arp_ip_count++) { + for (arp_ip_count = 0, i = 0; + (arp_ip_count < BOND_MAX_ARP_TARGETS) && arp_ip_target[i]; i++) { /* not complete check, but should be good enough to catch mistakes */ - __be32 ip = in_aton(arp_ip_target[arp_ip_count]); - if (!isdigit(arp_ip_target[arp_ip_count][0]) || - ip == 0 || ip == htonl(INADDR_BROADCAST)) { + __be32 ip = in_aton(arp_ip_target[i]); + if (!isdigit(arp_ip_target[i][0]) || ip == 0 || + ip == htonl(INADDR_BROADCAST)) { pr_warning("Warning: bad arp_ip_target module parameter (%s), ARP monitoring will not be performed\n", - arp_ip_target[arp_ip_count]); + arp_ip_target[i]); arp_interval = 0; } else { - arp_target[arp_ip_count] = ip; + arp_target[arp_ip_count++] = ip; } } @@ -4697,8 +4696,6 @@ static int bond_check_params(struct bond_params *params) if (miimon) { pr_info("MII link monitoring set to %d ms\n", miimon); } else if (arp_interval) { - int i; - pr_info("ARP monitoring set to %d ms, validate %s, with %d target(s):", arp_interval, arp_validate_tbl[arp_validate_value].modename, -- cgit v0.10.2 From 318debd897735fe834545b6f3d2e96bcc9210b9f Mon Sep 17 00:00:00 2001 From: "nikolay@redhat.com" Date: Sat, 18 May 2013 01:18:31 +0000 Subject: bonding: fix multiple 3ad mode sysfs race conditions When bond_3ad_get_active_agg_info() is used in all show_ad_ functions it is not protected against slave manipulation and since it walks over the slaves and uses them, this can easily result in NULL pointer dereference or use of freed memory. Both the new wrapper and the internal function are exported to the bonding as they're needed in different places. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index fc58d11..390061d 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -2360,14 +2360,15 @@ int bond_3ad_set_carrier(struct bonding *bond) } /** - * bond_3ad_get_active_agg_info - get information of the active aggregator + * __bond_3ad_get_active_agg_info - get information of the active aggregator * @bond: bonding struct to work on * @ad_info: ad_info struct to fill with the bond's info * * Returns: 0 on success * < 0 on error */ -int bond_3ad_get_active_agg_info(struct bonding *bond, struct ad_info *ad_info) +int __bond_3ad_get_active_agg_info(struct bonding *bond, + struct ad_info *ad_info) { struct aggregator *aggregator = NULL; struct port *port; @@ -2391,6 +2392,18 @@ int bond_3ad_get_active_agg_info(struct bonding *bond, struct ad_info *ad_info) return -1; } +/* Wrapper used to hold bond->lock so no slave manipulation can occur */ +int bond_3ad_get_active_agg_info(struct bonding *bond, struct ad_info *ad_info) +{ + int ret; + + read_lock(&bond->lock); + ret = __bond_3ad_get_active_agg_info(bond, ad_info); + read_unlock(&bond->lock); + + return ret; +} + int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev) { struct slave *slave, *start_at; @@ -2402,8 +2415,8 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev) struct ad_info ad_info; int res = 1; - if (bond_3ad_get_active_agg_info(bond, &ad_info)) { - pr_debug("%s: Error: bond_3ad_get_active_agg_info failed\n", + if (__bond_3ad_get_active_agg_info(bond, &ad_info)) { + pr_debug("%s: Error: __bond_3ad_get_active_agg_info failed\n", dev->name); goto out; } diff --git a/drivers/net/bonding/bond_3ad.h b/drivers/net/bonding/bond_3ad.h index 0cfaa4a..5d91ad0 100644 --- a/drivers/net/bonding/bond_3ad.h +++ b/drivers/net/bonding/bond_3ad.h @@ -273,6 +273,8 @@ void bond_3ad_adapter_speed_changed(struct slave *slave); void bond_3ad_adapter_duplex_changed(struct slave *slave); void bond_3ad_handle_link_change(struct slave *slave, char link); int bond_3ad_get_active_agg_info(struct bonding *bond, struct ad_info *ad_info); +int __bond_3ad_get_active_agg_info(struct bonding *bond, + struct ad_info *ad_info); int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev); int bond_3ad_lacpdu_recv(const struct sk_buff *skb, struct bonding *bond, struct slave *slave); diff --git a/drivers/net/bonding/bond_procfs.c b/drivers/net/bonding/bond_procfs.c index 94d06f1..4060d41 100644 --- a/drivers/net/bonding/bond_procfs.c +++ b/drivers/net/bonding/bond_procfs.c @@ -130,7 +130,7 @@ static void bond_info_show_master(struct seq_file *seq) seq_printf(seq, "Aggregator selection policy (ad_select): %s\n", ad_select_tbl[bond->params.ad_select].modename); - if (bond_3ad_get_active_agg_info(bond, &ad_info)) { + if (__bond_3ad_get_active_agg_info(bond, &ad_info)) { seq_printf(seq, "bond %s has no active aggregator\n", bond->dev->name); } else { diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 77ea237..d7434e0 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -1319,7 +1319,6 @@ static ssize_t bonding_show_mii_status(struct device *d, } static DEVICE_ATTR(mii_status, S_IRUGO, bonding_show_mii_status, NULL); - /* * Show current 802.3ad aggregator ID. */ @@ -1333,7 +1332,7 @@ static ssize_t bonding_show_ad_aggregator(struct device *d, if (bond->params.mode == BOND_MODE_8023AD) { struct ad_info ad_info; count = sprintf(buf, "%d\n", - (bond_3ad_get_active_agg_info(bond, &ad_info)) + bond_3ad_get_active_agg_info(bond, &ad_info) ? 0 : ad_info.aggregator_id); } @@ -1355,7 +1354,7 @@ static ssize_t bonding_show_ad_num_ports(struct device *d, if (bond->params.mode == BOND_MODE_8023AD) { struct ad_info ad_info; count = sprintf(buf, "%d\n", - (bond_3ad_get_active_agg_info(bond, &ad_info)) + bond_3ad_get_active_agg_info(bond, &ad_info) ? 0 : ad_info.ports); } @@ -1377,7 +1376,7 @@ static ssize_t bonding_show_ad_actor_key(struct device *d, if (bond->params.mode == BOND_MODE_8023AD) { struct ad_info ad_info; count = sprintf(buf, "%d\n", - (bond_3ad_get_active_agg_info(bond, &ad_info)) + bond_3ad_get_active_agg_info(bond, &ad_info) ? 0 : ad_info.actor_key); } @@ -1399,7 +1398,7 @@ static ssize_t bonding_show_ad_partner_key(struct device *d, if (bond->params.mode == BOND_MODE_8023AD) { struct ad_info ad_info; count = sprintf(buf, "%d\n", - (bond_3ad_get_active_agg_info(bond, &ad_info)) + bond_3ad_get_active_agg_info(bond, &ad_info) ? 0 : ad_info.partner_key); } -- cgit v0.10.2 From b423e9ae49d78ea3f53b131c8d5a6087aed16fd6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?fran=C3=A7ois=20romieu?= Date: Sat, 18 May 2013 01:24:46 +0000 Subject: r8169: fix offloaded tx checksum for small packets. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 8168evl offloaded checksums are wrong since commit e5195c1f31f399289347e043d6abf3ffa80f0005 ("r8169: fix 8168evl frame padding.") pads small packets to 60 bytes (without ethernet checksum). Typical symptoms appear as UDP checksums which are wrong by the count of added bytes. It isn't worth compensating. Let the driver checksum. Due to the skb length changes, TSO code is moved before the Tx descriptor gets written. Signed-off-by: Francois Romieu Tested-by: Holger Hoffstätte Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 79c520b..393f961 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -5856,7 +5856,20 @@ err_out: return -EIO; } -static inline void rtl8169_tso_csum(struct rtl8169_private *tp, +static bool rtl_skb_pad(struct sk_buff *skb) +{ + if (skb_padto(skb, ETH_ZLEN)) + return false; + skb_put(skb, ETH_ZLEN - skb->len); + return true; +} + +static bool rtl_test_hw_pad_bug(struct rtl8169_private *tp, struct sk_buff *skb) +{ + return skb->len < ETH_ZLEN && tp->mac_version == RTL_GIGA_MAC_VER_34; +} + +static inline bool rtl8169_tso_csum(struct rtl8169_private *tp, struct sk_buff *skb, u32 *opts) { const struct rtl_tx_desc_info *info = tx_desc_info + tp->txd_version; @@ -5869,13 +5882,20 @@ static inline void rtl8169_tso_csum(struct rtl8169_private *tp, } else if (skb->ip_summed == CHECKSUM_PARTIAL) { const struct iphdr *ip = ip_hdr(skb); + if (unlikely(rtl_test_hw_pad_bug(tp, skb))) + return skb_checksum_help(skb) == 0 && rtl_skb_pad(skb); + if (ip->protocol == IPPROTO_TCP) opts[offset] |= info->checksum.tcp; else if (ip->protocol == IPPROTO_UDP) opts[offset] |= info->checksum.udp; else WARN_ON_ONCE(1); + } else { + if (unlikely(rtl_test_hw_pad_bug(tp, skb))) + return rtl_skb_pad(skb); } + return true; } static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb, @@ -5896,17 +5916,15 @@ static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb, goto err_stop_0; } - /* 8168evl does not automatically pad to minimum length. */ - if (unlikely(tp->mac_version == RTL_GIGA_MAC_VER_34 && - skb->len < ETH_ZLEN)) { - if (skb_padto(skb, ETH_ZLEN)) - goto err_update_stats; - skb_put(skb, ETH_ZLEN - skb->len); - } - if (unlikely(le32_to_cpu(txd->opts1) & DescOwn)) goto err_stop_0; + opts[1] = cpu_to_le32(rtl8169_tx_vlan_tag(skb)); + opts[0] = DescOwn; + + if (!rtl8169_tso_csum(tp, skb, opts)) + goto err_update_stats; + len = skb_headlen(skb); mapping = dma_map_single(d, skb->data, len, DMA_TO_DEVICE); if (unlikely(dma_mapping_error(d, mapping))) { @@ -5918,11 +5936,6 @@ static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb, tp->tx_skb[entry].len = len; txd->addr = cpu_to_le64(mapping); - opts[1] = cpu_to_le32(rtl8169_tx_vlan_tag(skb)); - opts[0] = DescOwn; - - rtl8169_tso_csum(tp, skb, opts); - frags = rtl8169_xmit_frags(tp, skb, opts); if (frags < 0) goto err_dma_1; -- cgit v0.10.2 From 96f5a846bdd60986992228bc7dae94d4d8eaacc0 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 18 May 2013 08:36:03 +0000 Subject: ip_gre: fix a possible crash in ipgre_err() Another fix needed in ipgre_err(), as parse_gre_header() might change skb->head. Bug added in commit c54419321455 (GRE: Refactor GRE tunneling code.) Signed-off-by: Eric Dumazet Cc: Pravin B Shelar Signed-off-by: David S. Miller diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c index c625e4d..2a83591 100644 --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -235,7 +235,7 @@ static void ipgre_err(struct sk_buff *skb, u32 info) */ struct net *net = dev_net(skb->dev); struct ip_tunnel_net *itn; - const struct iphdr *iph = (const struct iphdr *)skb->data; + const struct iphdr *iph; const int type = icmp_hdr(skb)->type; const int code = icmp_hdr(skb)->code; struct ip_tunnel *t; @@ -281,6 +281,7 @@ static void ipgre_err(struct sk_buff *skb, u32 info) else itn = net_generic(net, ipgre_net_id); + iph = (const struct iphdr *)skb->data; t = ip_tunnel_lookup(itn, skb->dev->ifindex, tpi.flags, iph->daddr, iph->saddr, tpi.key); -- cgit v0.10.2 From 057cf65e4f715f62acccbd9125cf63eddfe69d30 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Sun, 19 May 2013 04:41:01 +0000 Subject: bnx2x: Fix GSO for 57710/57711 chips Starting with commit 91226790bbe2dbfbba48dd79d49f2b38ef10eb97 `bnx2x: use FW 7.8.17', the bnx2x driver no longer requests the FW to perform IP checksums for IPv4 packets. This behaviour needs to be revised for 57710/57711 chips - when using GSO, if the driver will not set the IP checksum flag then packets will be transmitted by the chip without a valid IP checksum, resulting in a drop of all such packets on the receiver-side. Signed-off-by: Yuval Mintz Signed-off-by: Dmitry Kravkov Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index b8fbe26..be59ec4 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -3313,6 +3313,7 @@ static void bnx2x_set_pbd_gso_e2(struct sk_buff *skb, u32 *parsing_data, */ static void bnx2x_set_pbd_gso(struct sk_buff *skb, struct eth_tx_parse_bd_e1x *pbd, + struct eth_tx_start_bd *tx_start_bd, u32 xmit_type) { pbd->lso_mss = cpu_to_le16(skb_shinfo(skb)->gso_size); @@ -3326,11 +3327,14 @@ static void bnx2x_set_pbd_gso(struct sk_buff *skb, ip_hdr(skb)->daddr, 0, IPPROTO_TCP, 0)); - } else + /* GSO on 57710/57711 needs FW to calculate IP checksum */ + tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_IP_CSUM; + } else { pbd->tcp_pseudo_csum = bswab16(~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr, 0, IPPROTO_TCP, 0)); + } pbd->global_data |= cpu_to_le16(ETH_TX_PARSE_BD_E1X_PSEUDO_CS_WITHOUT_LEN); @@ -3814,7 +3818,8 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) bnx2x_set_pbd_gso_e2(skb, &pbd_e2_parsing_data, xmit_type); else - bnx2x_set_pbd_gso(skb, pbd_e1x, xmit_type); + bnx2x_set_pbd_gso(skb, pbd_e1x, tx_start_bd, + xmit_type); } /* Set the PBD's parsing_data field if not zero -- cgit v0.10.2 From 57a9c7609d7418ce75324df38f66cd7d937a77cb Mon Sep 17 00:00:00 2001 From: Clement Chauplannaz Date: Sun, 12 May 2013 21:08:52 +0200 Subject: scripts/config: fix assignment of parameters for short version of --*-after options When --*-after options are used, two parameters are parsed from the command-line before the adequate function is called: - the `before' option, after which the new option will be inserted, - the name of the option to enable/disable/modularise. With the short version of --*-after options (namely -E, -D, -M), the parsing step is not performed which leads to processing unset variables. Add options -E, -D, -M to the test that triggers assignment of parameters for --*-after options. Signed-off-by: Clement Chauplannaz Acked-by: Andi Kleen Signed-off-by: Yann E. MORIN diff --git a/scripts/config b/scripts/config index bb4d3de..a65ecbb 100755 --- a/scripts/config +++ b/scripts/config @@ -105,7 +105,7 @@ while [ "$1" != "" ] ; do ;; --refresh) ;; - --*-after) + --*-after|-E|-D|-M) checkarg "$1" A=$ARG checkarg "$2" -- cgit v0.10.2 From 3d15aacbb802af72b4ff0c3ba576536cdb3bace0 Mon Sep 17 00:00:00 2001 From: Andrew Bresticker Date: Sun, 19 May 2013 22:58:07 -0700 Subject: ASoC: max98090: request IRQF_ONESHOT interrupt request_threaded_irq() rejects calls which both do not specify a handler (indicating that the primary IRQ handler should be used) and do not set IRQF_ONESHOT because the combination is unsafe with level-triggered interrupts. It is safe in this case, though, since max98090 IRQs are edge-triggered and the interrupts aren't ACK'ed until the codec's IRQ status register is read. Because of this, an IRQF_ONESHOT interrupt doesn't really make a difference, but request one anyway in order to make request_threaded_irq() happy. Signed-off-by: Andrew Bresticker Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c index ce0d364..8d14a76 100644 --- a/sound/soc/codecs/max98090.c +++ b/sound/soc/codecs/max98090.c @@ -2233,7 +2233,7 @@ static int max98090_probe(struct snd_soc_codec *codec) dev_dbg(codec->dev, "irq = %d\n", max98090->irq); ret = request_threaded_irq(max98090->irq, NULL, - max98090_interrupt, IRQF_TRIGGER_FALLING, + max98090_interrupt, IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "max98090_interrupt", codec); if (ret < 0) { dev_err(codec->dev, "request_irq failed: %d\n", -- cgit v0.10.2 From 2c071ed7c3660992951abe4b560359058ce41f68 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Mon, 20 May 2013 08:33:54 +0100 Subject: ASoC: soc-compress: Send correct stream event for capture start Signed-off-by: Charles Keepax Signed-off-by: Mark Brown diff --git a/sound/soc/soc-compress.c b/sound/soc/soc-compress.c index 3853f7e..06a8000 100644 --- a/sound/soc/soc-compress.c +++ b/sound/soc/soc-compress.c @@ -220,8 +220,12 @@ static int soc_compr_set_params(struct snd_compr_stream *cstream, goto err; } - snd_soc_dapm_stream_event(rtd, SNDRV_PCM_STREAM_PLAYBACK, - SND_SOC_DAPM_STREAM_START); + if (cstream->direction == SND_COMPRESS_PLAYBACK) + snd_soc_dapm_stream_event(rtd, SNDRV_PCM_STREAM_PLAYBACK, + SND_SOC_DAPM_STREAM_START); + else + snd_soc_dapm_stream_event(rtd, SNDRV_PCM_STREAM_CAPTURE, + SND_SOC_DAPM_STREAM_START); /* cancel any delayed stream shutdown that is pending */ rtd->pop_wait = 0; -- cgit v0.10.2 From 917cc4e6b25c655264e8ea903eb77db25994ac24 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 19 May 2013 20:44:27 -0700 Subject: MAINTAINERS: Add myself as maintainer for LM95234 and TMP401 drivers I wrote the LM95234 driver and extended the TMP401 driver substantially, and I have hardware to test both, so it makes sense to explicitly maintain them. Signed-off-by: Guenter Roeck Acked-by: Jean Delvare diff --git a/MAINTAINERS b/MAINTAINERS index 3d7782b..f0f3d20 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4976,6 +4976,13 @@ S: Maintained F: Documentation/hwmon/lm90 F: drivers/hwmon/lm90.c +LM95234 HARDWARE MONITOR DRIVER +M: Guenter Roeck +L: lm-sensors@lm-sensors.org +S: Maintained +F: Documentation/hwmon/lm95234 +F: drivers/hwmon/lm95234.c + LME2510 MEDIA DRIVER M: Malcolm Priestley L: linux-media@vger.kernel.org @@ -8182,6 +8189,13 @@ F: drivers/mmc/host/sh_mobile_sdhi.c F: include/linux/mmc/tmio.h F: include/linux/mmc/sh_mobile_sdhi.h +TMP401 HARDWARE MONITOR DRIVER +M: Guenter Roeck +L: lm-sensors@lm-sensors.org +S: Maintained +F: Documentation/hwmon/tmp401 +F: drivers/hwmon/tmp401.c + TMPFS (SHMEM FILESYSTEM) M: Hugh Dickins L: linux-mm@kvack.org -- cgit v0.10.2 From 6ab7631014d0648e916f674c4bce0518739a2142 Mon Sep 17 00:00:00 2001 From: Niels Ole Salscheider Date: Tue, 14 May 2013 22:27:26 +0200 Subject: drm/radeon: Remove superfluous variable bool in_mode_set from struct radeon_crtc is not used anymore. Signed-off-by: Niels Ole Salscheider Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 6d6fdb3..d5df8fd 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -1811,12 +1811,9 @@ static bool atombios_crtc_mode_fixup(struct drm_crtc *crtc, static void atombios_crtc_prepare(struct drm_crtc *crtc) { - struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct drm_device *dev = crtc->dev; struct radeon_device *rdev = dev->dev_private; - radeon_crtc->in_mode_set = true; - /* disable crtc pair power gating before programming */ if (ASIC_IS_DCE6(rdev)) atombios_powergate_crtc(crtc, ATOM_DISABLE); @@ -1827,11 +1824,8 @@ static void atombios_crtc_prepare(struct drm_crtc *crtc) static void atombios_crtc_commit(struct drm_crtc *crtc) { - struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); - atombios_crtc_dpms(crtc, DRM_MODE_DPMS_ON); atombios_lock_crtc(crtc, ATOM_DISABLE); - radeon_crtc->in_mode_set = false; } static void atombios_crtc_disable(struct drm_crtc *crtc) diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index 6857cb4..7cb178a 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -1031,11 +1031,9 @@ static int radeon_crtc_mode_set(struct drm_crtc *crtc, static void radeon_crtc_prepare(struct drm_crtc *crtc) { - struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct drm_device *dev = crtc->dev; struct drm_crtc *crtci; - radeon_crtc->in_mode_set = true; /* * The hardware wedges sometimes if you reconfigure one CRTC * whilst another is running (see fdo bug #24611). @@ -1046,7 +1044,6 @@ static void radeon_crtc_prepare(struct drm_crtc *crtc) static void radeon_crtc_commit(struct drm_crtc *crtc) { - struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct drm_device *dev = crtc->dev; struct drm_crtc *crtci; @@ -1057,7 +1054,6 @@ static void radeon_crtc_commit(struct drm_crtc *crtc) if (crtci->enabled) radeon_crtc_dpms(crtci, DRM_MODE_DPMS_ON); } - radeon_crtc->in_mode_set = false; } static const struct drm_crtc_helper_funcs legacy_helper_funcs = { diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index 44e579e..69ad4fe 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -302,7 +302,6 @@ struct radeon_crtc { u16 lut_r[256], lut_g[256], lut_b[256]; bool enabled; bool can_tile; - bool in_mode_set; uint32_t crtc_offset; struct drm_gem_object *cursor_bo; uint64_t cursor_addr; -- cgit v0.10.2 From fc986034540102cd090237bf3f70262e1ae80d9c Mon Sep 17 00:00:00 2001 From: Niels Ole Salscheider Date: Sat, 18 May 2013 21:19:23 +0200 Subject: drm/radeon: Fix VRAM size calculation for VRAM >= 4GB Add ULL prefix to avoid overflow. Signed-off-by: Niels Ole Salscheider Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 105bafb..06c261b 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -3405,8 +3405,8 @@ int evergreen_mc_init(struct radeon_device *rdev) rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE); } else { /* size in MB on evergreen/cayman/tn */ - rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024; - rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024; + rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE) * 1024ULL * 1024ULL; + rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE) * 1024ULL * 1024ULL; } rdev->mc.visible_vram_size = rdev->mc.aper_size; r700_vram_gtt_location(rdev, &rdev->mc); diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index 93f760e..6c0ce89 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -726,7 +726,7 @@ int radeon_ttm_init(struct radeon_device *rdev) return r; } DRM_INFO("radeon: %uM of VRAM memory ready\n", - (unsigned)rdev->mc.real_vram_size / (1024 * 1024)); + (unsigned) (rdev->mc.real_vram_size / (1024 * 1024))); r = ttm_bo_init_mm(&rdev->mman.bdev, TTM_PL_TT, rdev->mc.gtt_size >> PAGE_SHIFT); if (r) { diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index f0b6c2f..113ed9f 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -3397,8 +3397,8 @@ static int si_mc_init(struct radeon_device *rdev) rdev->mc.aper_base = pci_resource_start(rdev->pdev, 0); rdev->mc.aper_size = pci_resource_len(rdev->pdev, 0); /* size in MB on si */ - rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024; - rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024; + rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE) * 1024ULL * 1024ULL; + rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE) * 1024ULL * 1024ULL; rdev->mc.visible_vram_size = rdev->mc.aper_size; si_vram_gtt_location(rdev, &rdev->mc); radeon_update_bandwidth_info(rdev); -- cgit v0.10.2 From 731da21b7b205efb388481f7a9731c4c1ca3b48c Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 13 May 2013 11:35:26 -0400 Subject: drm/radeon/dce2: use 10khz units for audio dto calculation Avoids overflows on DCE2.x devices. Also clarify the calculation on other asics. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/radeon/evergreen_hdmi.c b/drivers/gpu/drm/radeon/evergreen_hdmi.c index b4ab8ce..ed7c8a7 100644 --- a/drivers/gpu/drm/radeon/evergreen_hdmi.c +++ b/drivers/gpu/drm/radeon/evergreen_hdmi.c @@ -154,19 +154,18 @@ static void evergreen_audio_set_dto(struct drm_encoder *encoder, u32 clock) struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc); - u32 base_rate = 48000; + u32 base_rate = 24000; if (!dig || !dig->afmt) return; - /* XXX: properly calculate this */ /* XXX two dtos; generally use dto0 for hdmi */ /* Express [24MHz / target pixel clock] as an exact rational * number (coefficient of two integer numbers. DCCG_AUDIO_DTOx_PHASE * is the numerator, DCCG_AUDIO_DTOx_MODULE is the denominator */ - WREG32(DCCG_AUDIO_DTO0_PHASE, (base_rate*50) & 0xffffff); - WREG32(DCCG_AUDIO_DTO0_MODULE, (clock*100) & 0xffffff); + WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 100); + WREG32(DCCG_AUDIO_DTO0_MODULE, clock * 100); WREG32(DCCG_AUDIO_DTO_SOURCE, DCCG_AUDIO_DTO0_SOURCE_SEL(radeon_crtc->crtc_id)); } diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c index 47f180a..456750a 100644 --- a/drivers/gpu/drm/radeon/r600_hdmi.c +++ b/drivers/gpu/drm/radeon/r600_hdmi.c @@ -232,7 +232,7 @@ void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock) struct radeon_device *rdev = dev->dev_private; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; - u32 base_rate = 48000; + u32 base_rate = 24000; if (!dig || !dig->afmt) return; @@ -240,7 +240,6 @@ void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock) /* there are two DTOs selected by DCCG_AUDIO_DTO_SELECT. * doesn't matter which one you use. Just use the first one. */ - /* XXX: properly calculate this */ /* XXX two dtos; generally use dto0 for hdmi */ /* Express [24MHz / target pixel clock] as an exact rational * number (coefficient of two integer numbers. DCCG_AUDIO_DTOx_PHASE @@ -250,13 +249,13 @@ void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock) /* according to the reg specs, this should DCE3.2 only, but in * practice it seems to cover DCE3.0 as well. */ - WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 50); + WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 100); WREG32(DCCG_AUDIO_DTO0_MODULE, clock * 100); WREG32(DCCG_AUDIO_DTO_SELECT, 0); /* select DTO0 */ } else { /* according to the reg specs, this should be DCE2.0 and DCE3.0 */ - WREG32(AUDIO_DTO, AUDIO_DTO_PHASE(base_rate * 50) | - AUDIO_DTO_MODULE(clock * 100)); + WREG32(AUDIO_DTO, AUDIO_DTO_PHASE(base_rate / 10) | + AUDIO_DTO_MODULE(clock / 10)); } } -- cgit v0.10.2 From 3634a6327815d39dd93e5c44a602daae91c66297 Mon Sep 17 00:00:00 2001 From: Brian Foster Date: Fri, 17 May 2013 09:30:32 -0400 Subject: fuse: truncate pagecache range on hole punch fuse supports hole punch via the fallocate() FALLOC_FL_PUNCH_HOLE interface. When a hole punch is passed through, the page cache is not cleared and thus allows reading stale data from the cache. This is easily demonstrable (using FOPEN_KEEP_CACHE) by reading a smallish random data file into cache, punching a hole and creating a copy of the file. Drop caches or remount and observe that the original file no longer matches the file copied after the hole punch. The original file contains a zeroed range and the latter file contains stale data. Protect against writepage requests in progress and punch out the associated page cache range after a successful client fs hole punch. Signed-off-by: Brian Foster Signed-off-by: Miklos Szeredi diff --git a/fs/fuse/file.c b/fs/fuse/file.c index fe19132..a200a2d 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -16,6 +16,7 @@ #include #include #include +#include static const struct file_operations fuse_direct_io_file_operations; @@ -2453,6 +2454,7 @@ static long fuse_file_fallocate(struct file *file, int mode, loff_t offset, loff_t length) { struct fuse_file *ff = file->private_data; + struct inode *inode = file->f_inode; struct fuse_conn *fc = ff->fc; struct fuse_req *req; struct fuse_fallocate_in inarg = { @@ -2466,9 +2468,16 @@ static long fuse_file_fallocate(struct file *file, int mode, loff_t offset, if (fc->no_fallocate) return -EOPNOTSUPP; + if (mode & FALLOC_FL_PUNCH_HOLE) { + mutex_lock(&inode->i_mutex); + fuse_set_nowrite(inode); + } + req = fuse_get_req_nopages(fc); - if (IS_ERR(req)) - return PTR_ERR(req); + if (IS_ERR(req)) { + err = PTR_ERR(req); + goto out; + } req->in.h.opcode = FUSE_FALLOCATE; req->in.h.nodeid = ff->nodeid; @@ -2483,6 +2492,15 @@ static long fuse_file_fallocate(struct file *file, int mode, loff_t offset, } fuse_put_request(fc, req); +out: + if (mode & FALLOC_FL_PUNCH_HOLE) { + if (!err) + truncate_pagecache_range(inode, offset, + offset + length - 1); + fuse_release_nowrite(inode); + mutex_unlock(&inode->i_mutex); + } + return err; } -- cgit v0.10.2 From bee6c307800bbb26ba1a855b1841c2f0c4b7622a Mon Sep 17 00:00:00 2001 From: Brian Foster Date: Fri, 17 May 2013 15:27:34 -0400 Subject: fuse: update inode size and invalidate attributes on fallocate An fallocate request without FALLOC_FL_KEEP_SIZE set can extend the size of a file. Update the inode size after a successful fallocate. Also invalidate the inode attributes after a successful fallocate to ensure we pick up the latest attribute values (i.e., i_blocks). Signed-off-by: Brian Foster Signed-off-by: Miklos Szeredi diff --git a/fs/fuse/file.c b/fs/fuse/file.c index a200a2d..d9f4679 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -2492,11 +2492,20 @@ static long fuse_file_fallocate(struct file *file, int mode, loff_t offset, } fuse_put_request(fc, req); + if (err) + goto out; + + /* we could have extended the file */ + if (!(mode & FALLOC_FL_KEEP_SIZE)) + fuse_write_update_size(inode, offset + length); + + if (mode & FALLOC_FL_PUNCH_HOLE) + truncate_pagecache_range(inode, offset, offset + length - 1); + + fuse_invalidate_attr(inode); + out: if (mode & FALLOC_FL_PUNCH_HOLE) { - if (!err) - truncate_pagecache_range(inode, offset, - offset + length - 1); fuse_release_nowrite(inode); mutex_unlock(&inode->i_mutex); } -- cgit v0.10.2 From b5d9d72624b3591e4745422bd93399f9f158fb9e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 26 Jul 2012 18:53:55 -0400 Subject: drm/radeon: add chip family for Hainan MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Alex Deucher Reviewed-by: Christian König diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 1442ce7..ec26d68 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -1838,6 +1838,7 @@ void r100_pll_errata_after_index(struct radeon_device *rdev); #define ASIC_IS_DCE61(rdev) ((rdev->family >= CHIP_ARUBA) && \ (rdev->flags & RADEON_IS_IGP)) #define ASIC_IS_DCE64(rdev) ((rdev->family == CHIP_OLAND)) +#define ASIC_IS_NODCE(rdev) ((rdev->family == CHIP_HAINAN)) /* * BIOS helpers. diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index a8f6089..c2c59fb 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -94,6 +94,7 @@ static const char radeon_family_name[][16] = { "PITCAIRN", "VERDE", "OLAND", + "HAINAN", "LAST", }; diff --git a/drivers/gpu/drm/radeon/radeon_family.h b/drivers/gpu/drm/radeon/radeon_family.h index 2d91123..36e9803 100644 --- a/drivers/gpu/drm/radeon/radeon_family.h +++ b/drivers/gpu/drm/radeon/radeon_family.h @@ -92,6 +92,7 @@ enum radeon_family { CHIP_PITCAIRN, CHIP_VERDE, CHIP_OLAND, + CHIP_HAINAN, CHIP_LAST, }; -- cgit v0.10.2 From 8b02859d771e0f2800b841c4c7eb17f3a7852b88 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 31 Jul 2012 12:42:48 -0400 Subject: drm/radeon: fill in GPU init for Hainan (v2) v2: fix gb_addr_config value Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index 113ed9f..1d8c615 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -2003,7 +2003,8 @@ static void si_tiling_mode_table_init(struct radeon_device *rdev) WREG32(GB_TILE_MODE0 + (reg_offset * 4), gb_tile_moden); } } else if ((rdev->family == CHIP_VERDE) || - (rdev->family == CHIP_OLAND)) { + (rdev->family == CHIP_OLAND) || + (rdev->family == CHIP_HAINAN)) { for (reg_offset = 0; reg_offset < num_tile_mode_states; reg_offset++) { switch (reg_offset) { case 0: /* non-AA compressed depth or any compressed stencil */ @@ -2466,6 +2467,23 @@ static void si_gpu_init(struct radeon_device *rdev) rdev->config.si.sc_earlyz_tile_fifo_size = 0x130; gb_addr_config = VERDE_GB_ADDR_CONFIG_GOLDEN; break; + case CHIP_HAINAN: + rdev->config.si.max_shader_engines = 1; + rdev->config.si.max_tile_pipes = 4; + rdev->config.si.max_cu_per_sh = 5; + rdev->config.si.max_sh_per_se = 1; + rdev->config.si.max_backends_per_se = 1; + rdev->config.si.max_texture_channel_caches = 2; + rdev->config.si.max_gprs = 256; + rdev->config.si.max_gs_threads = 16; + rdev->config.si.max_hw_contexts = 8; + + rdev->config.si.sc_prim_fifo_size_frontend = 0x20; + rdev->config.si.sc_prim_fifo_size_backend = 0x40; + rdev->config.si.sc_hiz_tile_fifo_size = 0x30; + rdev->config.si.sc_earlyz_tile_fifo_size = 0x130; + gb_addr_config = HAINAN_GB_ADDR_CONFIG_GOLDEN; + break; } /* Initialize HDP */ diff --git a/drivers/gpu/drm/radeon/sid.h b/drivers/gpu/drm/radeon/sid.h index 222877b..8f2d7d4 100644 --- a/drivers/gpu/drm/radeon/sid.h +++ b/drivers/gpu/drm/radeon/sid.h @@ -28,6 +28,7 @@ #define TAHITI_GB_ADDR_CONFIG_GOLDEN 0x12011003 #define VERDE_GB_ADDR_CONFIG_GOLDEN 0x12010002 +#define HAINAN_GB_ADDR_CONFIG_GOLDEN 0x02010001 /* discrete uvd clocks */ #define CG_UPLL_FUNC_CNTL 0x634 -- cgit v0.10.2 From 8bb3e55103b37869175333e00fc01b34b0459529 Mon Sep 17 00:00:00 2001 From: Dan Magenheimer Date: Mon, 20 May 2013 07:52:17 -0700 Subject: staging: ramster: add how-to document Add how-to documentation that provides a step-by-step guide for configuring and trying out a ramster cluster. Signed-off-by: Dan Magenheimer Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/zcache/ramster/ramster-howto.txt b/drivers/staging/zcache/ramster/ramster-howto.txt new file mode 100644 index 0000000..7b1ee3b --- /dev/null +++ b/drivers/staging/zcache/ramster/ramster-howto.txt @@ -0,0 +1,366 @@ + RAMSTER HOW-TO + +Author: Dan Magenheimer +Ramster maintainer: Konrad Wilk + +This is a HOWTO document for ramster which, as of this writing, is in +the kernel as a subdirectory of zcache in drivers/staging, called ramster. +(Zcache can be built with or without ramster functionality.) If enabled +and properly configured, ramster allows memory capacity load balancing +across multiple machines in a cluster. Further, the ramster code serves +as an example of asynchronous access for zcache (as well as cleancache and +frontswap) that may prove useful for future transcendent memory +implementations, such as KVM and NVRAM. While ramster works today on +any network connection that supports kernel sockets, its features may +become more interesting on future high-speed fabrics/interconnects. + +Ramster requires both kernel and userland support. The userland support, +called ramster-tools, is known to work with EL6-based distros, but is a +set of poorly-hacked slightly-modified cluster tools based on ocfs2, which +includes an init file, a config file, and a userland binary that interfaces +to the kernel. This state of userland support reflects the abysmal userland +skills of this suitably-embarrassed author; any help/patches to turn +ramster-tools into more distributable rpms/debs useful for a wider range +of distros would be appreciated. The source RPM that can be used as a +starting point is available at: + http://oss.oracle.com/projects/tmem/files/RAMster/ + +As a result of this author's ignorance, userland setup described in this +HOWTO assumes an EL6 distro and is described in EL6 syntax. Apologies +if this offends anyone! + +Kernel support has only been tested on x86_64. Systems with an active +ocfs2 filesystem should work, but since ramster leverages a lot of +code from ocfs2, there may be latent issues. A kernel configuration that +includes CONFIG_OCFS2_FS should build OK, and should certainly run OK +if no ocfs2 filesystem is mounted. + +This HOWTO demonstrates memory capacity load balancing for a two-node +cluster, where one node called the "local" node becomes overcommitted +and the other node called the "remote" node provides additional RAM +capacity for use by the local node. Ramster is capable of more complex +topologies; see the last section titled "ADVANCED RAMSTER TOPOLOGIES". + +If you find any terms in this HOWTO unfamiliar or don't understand the +motivation for ramster, the following LWN reading is recommended: +-- Transcendent Memory in a Nutshell (lwn.net/Articles/454795) +-- The future calculus of memory management (lwn.net/Articles/475681) +And since ramster is built on top of zcache, this article may be helpful: +-- In-kernel memory compression (lwn.net/Articles/545244) + +Now that you've memorized the contents of those articles, let's get started! + +A. PRELIMINARY + +1) Install two x86_64 Linux systems that are known to work when + upgraded to a recent upstream Linux kernel version. + +On each system: + +2) Configure, build and install, then boot Linux, just to ensure it + can be done with an unmodified upstream kernel. Confirm you booted + the upstream kernel with "uname -a". + +3) If you plan to do any performance testing or unless you plan to + test only swapping, the "WasActive" patch is also highly recommended. + (Search lkml.org for WasActive, apply the patch, rebuild your kernel.) + For a demo or simple testing, the patch can be ignored. + +4) Install ramster-tools as root. An x86_64 rpm for EL6-based systems + can be found at: + http://oss.oracle.com/projects/tmem/files/RAMster/ + (Sorry but for now, non-EL6 users must recreate ramster-tools on + their own from source. See above.) + +5) Ensure that debugfs is mounted at each boot. Examples below assume it + is mounted at /sys/kernel/debug. + +B. BUILDING RAMSTER INTO THE KERNEL + +Do the following on each system: + +1) Using the kernel configuration mechanism of your choice, change + your config to include: + + CONFIG_CLEANCACHE=y + CONFIG_FRONTSWAP=y + CONFIG_STAGING=y + CONFIG_CONFIGFS_FS=y # NOTE: MUST BE y, not m + CONFIG_ZCACHE=y + CONFIG_RAMSTER=y + + For a linux-3.10 or later kernel, you should also set: + + CONFIG_ZCACHE_DEBUG=y + CONFIG_RAMSTER_DEBUG=y + + Before building the kernel please doublecheck your kernel config + file to ensure all of the settings are correct. + +2) Build this kernel and change your boot file (e.g. /etc/grub.conf) + so that the new kernel will boot. + +3) Add "zcache" and "ramster" as kernel boot parameters for the new kernel. + +4) Reboot each system approximately simultaneously. + +5) Check dmesg to ensure there are some messages from ramster, prefixed + by "ramster:" + + # dmesg | grep ramster + + You should also see a lot of files in: + + # ls /sys/kernel/debug/zcache + # ls /sys/kernel/debug/ramster + + These are mostly counters for various zcache and ramster activities. + You should also see files in: + + # ls /sys/kernel/mm/ramster + + These are sysfs files that control ramster as we shall see. + + Ramster now will act as a single-system zcache on each system + but doesn't yet know anything about the cluster so can't yet do + anything remotely. + +C. CONFIGURING THE RAMSTER CLUSTER + +This part can be error prone unless you are familiar with clustering +filesystems. We need to describe the cluster in a /etc/ramster.conf +file and the init scripts that parse it are extremely picky about +the syntax. + +1) Create a /etc/ramster.conf file and ensure it is identical on both + systems. This file mimics the ocfs2 format and there is a good amount + of documentation that can be searched for ocfs2.conf, but you can use: + + cluster: + name = ramster + node_count = 2 + node: + name = system1 + cluster = ramster + number = 0 + ip_address = my.ip.ad.r1 + ip_port = 7777 + node: + name = system2 + cluster = ramster + number = 1 + ip_address = my.ip.ad.r2 + ip_port = 7777 + + You must ensure that the "name" field in the file exactly matches + the output of "hostname" on each system; if "hostname" shows a + fully-qualified hostname, ensure the name is fully qualified in + /etc/ramster.conf. Obviously, substitute my.ip.ad.rx with proper + ip addresses. + +2) Enable the ramster service and configure it. If you used the + EL6 ramster-tools, this would be: + + # chkconfig --add ramster + # service ramster configure + + Set "load on boot" to "y", cluster to start is "ramster" (or whatever + name you chose in ramster.conf), heartbeat dead threshold as "500", + network idle timeout as "1000000". Leave the others as default. + +3) Reboot both systems. After reboot, try (assuming EL6 ramster-tools): + + # service ramster status + + You should see "Checking RAMSTER cluster "ramster": Online". If you do + not, something is wrong and ramster will not work. Note that you + should also see that the driver for "configfs" is loaded and mounted, + the driver for ocfs2_dlmfs is not loaded, and some numbers for network + parameters. You will also see "Checking RAMSTER heartbeat: Not active". + That's all OK. + +4) Now you need to start the cluster heartbeat; the cluster is not "up" + until all nodes detect a heartbeat. In a real cluster, heartbeat detection + is done via a cluster filesystem, but ramster doesn't require one. Some + hack-y kernel code in ramster can start the heartbeat for you though if + you tell it what nodes are "up". To enable the heartbeat, do: + + # echo 0 > /sys/kernel/mm/ramster/manual_node_up + # echo 1 > /sys/kernel/mm/ramster/manual_node_up + + This must be done on BOTH nodes and, to avoid timeouts, must be done + approximately concurrently on both nodes. On an EL6 system, it is + convenient to put these lines in /etc/rc.local. To confirm that the + cluster is now up, on both systems do: + + # dmesg | grep ramster + + You should see ramster "Accepted connection" messages in dmesg on both + nodes after this. Note that if you check userland status again with + + # service ramster status + + you will still see "Checking RAMSTER heartbeat: Not active". That's + still OK... the ramster kernel heartbeat hack doesn't communicate to + userland. + +5) You now must tell each node the node to which it should "remotify" pages. + On this two node cluster, we will assume the "local" node, node 0, has + memory overcommitted and will use ramster to utilize RAM capacity on + the "remote node", node 1. To configure this, on node 0, you do: + + # echo 1 > /sys/kernel/mm/ramster/remote_target_nodenum + + You should see "ramster: node 1 set as remotification target" in dmesg + on node 0. Again, on EL6, /etc/rc.local is a good place to put this + on node 0 so you don't forget to do it at each boot. + +6) One more step: By default, the ramster code does not "remotify" any + pages; this is primarily for testing purposes, but sometimes it is + useful. This may change in the future, but for now, on node 0, you do: + + # echo 1 > /sys/kernel/mm/ramster/pers_remotify_enable + # echo 1 > /sys/kernel/mm/ramster/eph_remotify_enable + + The first enables remotifying swap (persistent, aka frontswap) pages, + the second enables remotifying of page cache (ephemeral, cleancache) + pages. + + On EL6, these lines can also be put in /etc/rc.local (AFTER the + node_up lines), or at the beginning of a script that runs a workload. + +7) Note that most testing has been done with both/all machines booted + roughly simultaneously to avoid cluster timeouts. Ideally, you should + do this too unless you are trying to break ramster rather than just + use it. ;-) + +D. TESTING RAMSTER + +1) Note that ramster has no value unless pages get "remotified". For + swap/frontswap/persistent pages, this doesn't happen unless/until + the workload would cause swapping to occur, at which point pages + are put into frontswap/zcache, and the remotification thread starts + working. To get to the point where the system swaps, you either + need a workload for which the working set exceeds the RAM in the + system; or you need to somehow reduce the amount of RAM one of + the system sees. This latter is easy when testing in a VM, but + harder on physical systems. In some cases, "mem=xxxM" on the + kernel command line restricts memory, but for some values of xxx + the kernel may fail to boot. One may also try creating a fixed + RAMdisk, doing nothing with it, but ensuring that it eats up a fixed + amount of RAM. + +2) To see if ramster is working, on the "remote node", node 1, try: + + # grep . /sys/kernel/debug/ramster/foreign_* + # # note, that is space-dot-space between grep and the pathname + + to monitor the number (and max) ephemeral and persistent pages + that ramster has sent. If these stay at zero, ramster is not working + either because the workload on the local node (node 0) isn't creating + enough memory pressure or because "remotifying" isn't working. On the + local system, node 0, you can watch lots of useful information also. + Try: + + grep . /sys/kernel/debug/zcache/*pageframes* \ + /sys/kernel/debug/zcache/*zbytes* \ + /sys/kernel/debug/zcache/*zpages* \ + /sys/kernel/debug/ramster/*remote* + + Of particular note are the remote_*_pages_succ_get counters. These + show how many disk reads and/or disk writes have been avoided on the + overcommitted local system by storing pages remotely using ramster. + + At the risk of information overload, you can also grep: + + /sys/kernel/debug/cleancache/* and /sys/kernel/debug/frontswap/* + + These show, for example, how many disk reads and/or disk writes have + been avoided by using zcache to optimize RAM on the local system. + + +AUTOMATIC SWAP REPATRIATION + +You may notice that while the systems are idle, the foreign persistent +page count on the remote machine slowly decreases. This is because +ramster implements "frontswap selfshrinking": When possible, swap +pages that have been remotified are slowly repatriated to the local +machine. This is so that local RAM can be used when possible and +so that, in case of remote machine crash, the probability of loss +of data is reduced. + +REBOOTING / POWEROFF + +If a system is shut down while some of its swap pages still reside +on a remote system, the system may lock up during the shutdown +sequence. This will occur if the network is shut down before the +swap mechansim is shut down, which is the default ordering on many +distros. To avoid this annoying problem, simply shut off the swap +subsystem before starting the shutdown sequence, e.g.: + + # swapoff -a + # reboot + +Ideally, this swapoff-before-ifdown ordering should be enforced permanently +using shutdown scripts. + +KNOWN PROBLEMS + +1) You may periodically see messages such as: + + ramster_r2net, message length problem + + This is harmless but indicates that a node is sending messages + containing compressed pages that exceed the maximum for zcache + (PAGE_SIZE*15/16). The sender side needs to be fixed. + +2) If you see a "No longer connected to node..." message or a "No connection + established with node X after N seconds", it is possible you may + be in an unrecoverable state. If you are certain all of the + appropriate cluster configuration steps described above have been + performed, try rebooting the two servers concurrently to see if + the cluster starts. + + Note that "Connection to node... shutdown, state 7" is an intermediate + connection state. As long as you later see "Accepted connection", the + intermediate states are harmless. + +3) There are known issues in counting certain values. As a result + you may see periodic warnings from the kernel. Almost always you + will see "ramster: bad accounting for XXX". There are also "WARN_ONCE" + messages. If you see kernel warnings with a tombstone, please report + them. They are harmless but reflect bugs that need to be eventually fixed. + +ADVANCED RAMSTER TOPOLOGIES + +The kernel code for ramster can support up to eight nodes in a cluster, +but no testing has been done with more than three nodes. + +In the example described above, the "remote" node serves as a RAM +overflow for the "local" node. This can be made symmetric by appropriate +settings of the sysfs remote_target_nodenum file. For example, by setting: + + # echo 1 > /sys/kernel/mm/ramster/remote_target_nodenum + +on node 0, and + + # echo 0 > /sys/kernel/mm/ramster/remote_target_nodenum + +on node 1, each node can serve as a RAM overflow for the other. + +For more than two nodes, a "RAM server" can be configured. For a +three node system, set: + + # echo 0 > /sys/kernel/mm/ramster/remote_target_nodenum + +on node 1, and + + # echo 0 > /sys/kernel/mm/ramster/remote_target_nodenum + +on node 2. Then node 0 is a RAM server for node 1 and node 2. + +In this implementation of ramster, any remote node is potentially a single +point of failure (SPOF). Though the probability of failure is reduced +by automatic swap repatriation (see above), a proposed future enhancement +to ramster improves high-availability for the cluster by sending a copy +of each page of date to two other nodes. Patches welcome! -- cgit v0.10.2 From 5153550ad7e1d8e7344aded830258d5be7292989 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 30 Aug 2012 14:34:30 -0400 Subject: drm/radeon: don't touch DCE or VGA regs on Hainan (v3) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Hainan has no display hardware: - no DCE (crtc, uniphy, dac, etc.) - no VGA v2: fix bios fetch v3: fix interrupts Signed-off-by: Alex Deucher Reviewed-by: Christian König diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 06c261b..8f9e2d3 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -2343,11 +2343,13 @@ void evergreen_mc_stop(struct radeon_device *rdev, struct evergreen_mc_save *sav u32 crtc_enabled, tmp, frame_count, blackout; int i, j; - save->vga_render_control = RREG32(VGA_RENDER_CONTROL); - save->vga_hdp_control = RREG32(VGA_HDP_CONTROL); + if (!ASIC_IS_NODCE(rdev)) { + save->vga_render_control = RREG32(VGA_RENDER_CONTROL); + save->vga_hdp_control = RREG32(VGA_HDP_CONTROL); - /* disable VGA render */ - WREG32(VGA_RENDER_CONTROL, 0); + /* disable VGA render */ + WREG32(VGA_RENDER_CONTROL, 0); + } /* blank the display controllers */ for (i = 0; i < rdev->num_crtc; i++) { crtc_enabled = RREG32(EVERGREEN_CRTC_CONTROL + crtc_offsets[i]) & EVERGREEN_CRTC_MASTER_EN; @@ -2438,8 +2440,11 @@ void evergreen_mc_resume(struct radeon_device *rdev, struct evergreen_mc_save *s WREG32(EVERGREEN_GRPH_SECONDARY_SURFACE_ADDRESS + crtc_offsets[i], (u32)rdev->mc.vram_start); } - WREG32(EVERGREEN_VGA_MEMORY_BASE_ADDRESS_HIGH, upper_32_bits(rdev->mc.vram_start)); - WREG32(EVERGREEN_VGA_MEMORY_BASE_ADDRESS, (u32)rdev->mc.vram_start); + + if (!ASIC_IS_NODCE(rdev)) { + WREG32(EVERGREEN_VGA_MEMORY_BASE_ADDRESS_HIGH, upper_32_bits(rdev->mc.vram_start)); + WREG32(EVERGREEN_VGA_MEMORY_BASE_ADDRESS, (u32)rdev->mc.vram_start); + } /* unlock regs and wait for update */ for (i = 0; i < rdev->num_crtc; i++) { @@ -2499,10 +2504,12 @@ void evergreen_mc_resume(struct radeon_device *rdev, struct evergreen_mc_save *s } } } - /* Unlock vga access */ - WREG32(VGA_HDP_CONTROL, save->vga_hdp_control); - mdelay(1); - WREG32(VGA_RENDER_CONTROL, save->vga_render_control); + if (!ASIC_IS_NODCE(rdev)) { + /* Unlock vga access */ + WREG32(VGA_HDP_CONTROL, save->vga_hdp_control); + mdelay(1); + WREG32(VGA_RENDER_CONTROL, save->vga_render_control); + } } void evergreen_mc_program(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c index b801591..9448cbf 100644 --- a/drivers/gpu/drm/radeon/radeon_bios.c +++ b/drivers/gpu/drm/radeon/radeon_bios.c @@ -221,24 +221,28 @@ static bool ni_read_disabled_bios(struct radeon_device *rdev) /* enable the rom */ WREG32(R600_BUS_CNTL, (bus_cntl & ~R600_BIOS_ROM_DIS)); - /* Disable VGA mode */ - WREG32(AVIVO_D1VGA_CONTROL, - (d1vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE | - AVIVO_DVGA_CONTROL_TIMING_SELECT))); - WREG32(AVIVO_D2VGA_CONTROL, - (d2vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE | - AVIVO_DVGA_CONTROL_TIMING_SELECT))); - WREG32(AVIVO_VGA_RENDER_CONTROL, - (vga_render_control & ~AVIVO_VGA_VSTATUS_CNTL_MASK)); + if (!ASIC_IS_NODCE(rdev)) { + /* Disable VGA mode */ + WREG32(AVIVO_D1VGA_CONTROL, + (d1vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE | + AVIVO_DVGA_CONTROL_TIMING_SELECT))); + WREG32(AVIVO_D2VGA_CONTROL, + (d2vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE | + AVIVO_DVGA_CONTROL_TIMING_SELECT))); + WREG32(AVIVO_VGA_RENDER_CONTROL, + (vga_render_control & ~AVIVO_VGA_VSTATUS_CNTL_MASK)); + } WREG32(R600_ROM_CNTL, rom_cntl | R600_SCK_OVERWRITE); r = radeon_read_bios(rdev); /* restore regs */ WREG32(R600_BUS_CNTL, bus_cntl); - WREG32(AVIVO_D1VGA_CONTROL, d1vga_control); - WREG32(AVIVO_D2VGA_CONTROL, d2vga_control); - WREG32(AVIVO_VGA_RENDER_CONTROL, vga_render_control); + if (!ASIC_IS_NODCE(rdev)) { + WREG32(AVIVO_D1VGA_CONTROL, d1vga_control); + WREG32(AVIVO_D2VGA_CONTROL, d2vga_control); + WREG32(AVIVO_VGA_RENDER_CONTROL, vga_render_control); + } WREG32(R600_ROM_CNTL, rom_cntl); return r; } diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index 1d8c615..14472cc 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -3322,8 +3322,9 @@ static void si_mc_program(struct radeon_device *rdev) if (radeon_mc_wait_for_idle(rdev)) { dev_warn(rdev->dev, "Wait for MC idle timedout !\n"); } - /* Lockout access through VGA aperture*/ - WREG32(VGA_HDP_CONTROL, VGA_MEMORY_DISABLE); + if (!ASIC_IS_NODCE(rdev)) + /* Lockout access through VGA aperture*/ + WREG32(VGA_HDP_CONTROL, VGA_MEMORY_DISABLE); /* Update configuration */ WREG32(MC_VM_SYSTEM_APERTURE_LOW_ADDR, rdev->mc.vram_start >> 12); @@ -3345,9 +3346,11 @@ static void si_mc_program(struct radeon_device *rdev) dev_warn(rdev->dev, "Wait for MC idle timedout !\n"); } evergreen_mc_resume(rdev, &save); - /* we need to own VRAM, so turn off the VGA renderer here - * to stop it overwriting our objects */ - rv515_vga_render_disable(rdev); + if (!ASIC_IS_NODCE(rdev)) { + /* we need to own VRAM, so turn off the VGA renderer here + * to stop it overwriting our objects */ + rv515_vga_render_disable(rdev); + } } static void si_vram_gtt_location(struct radeon_device *rdev, @@ -4269,8 +4272,10 @@ static void si_disable_interrupt_state(struct radeon_device *rdev) tmp = RREG32(DMA_CNTL + DMA1_REGISTER_OFFSET) & ~TRAP_ENABLE; WREG32(DMA_CNTL + DMA1_REGISTER_OFFSET, tmp); WREG32(GRBM_INT_CNTL, 0); - WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); - WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); + if (rdev->num_crtc >= 2) { + WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); + WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); + } if (rdev->num_crtc >= 4) { WREG32(INT_MASK + EVERGREEN_CRTC2_REGISTER_OFFSET, 0); WREG32(INT_MASK + EVERGREEN_CRTC3_REGISTER_OFFSET, 0); @@ -4280,8 +4285,10 @@ static void si_disable_interrupt_state(struct radeon_device *rdev) WREG32(INT_MASK + EVERGREEN_CRTC5_REGISTER_OFFSET, 0); } - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); + if (rdev->num_crtc >= 2) { + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); + } if (rdev->num_crtc >= 4) { WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, 0); WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, 0); @@ -4291,21 +4298,22 @@ static void si_disable_interrupt_state(struct radeon_device *rdev) WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, 0); } - WREG32(DACA_AUTODETECT_INT_CONTROL, 0); - - tmp = RREG32(DC_HPD1_INT_CONTROL) & DC_HPDx_INT_POLARITY; - WREG32(DC_HPD1_INT_CONTROL, tmp); - tmp = RREG32(DC_HPD2_INT_CONTROL) & DC_HPDx_INT_POLARITY; - WREG32(DC_HPD2_INT_CONTROL, tmp); - tmp = RREG32(DC_HPD3_INT_CONTROL) & DC_HPDx_INT_POLARITY; - WREG32(DC_HPD3_INT_CONTROL, tmp); - tmp = RREG32(DC_HPD4_INT_CONTROL) & DC_HPDx_INT_POLARITY; - WREG32(DC_HPD4_INT_CONTROL, tmp); - tmp = RREG32(DC_HPD5_INT_CONTROL) & DC_HPDx_INT_POLARITY; - WREG32(DC_HPD5_INT_CONTROL, tmp); - tmp = RREG32(DC_HPD6_INT_CONTROL) & DC_HPDx_INT_POLARITY; - WREG32(DC_HPD6_INT_CONTROL, tmp); + if (!ASIC_IS_NODCE(rdev)) { + WREG32(DACA_AUTODETECT_INT_CONTROL, 0); + tmp = RREG32(DC_HPD1_INT_CONTROL) & DC_HPDx_INT_POLARITY; + WREG32(DC_HPD1_INT_CONTROL, tmp); + tmp = RREG32(DC_HPD2_INT_CONTROL) & DC_HPDx_INT_POLARITY; + WREG32(DC_HPD2_INT_CONTROL, tmp); + tmp = RREG32(DC_HPD3_INT_CONTROL) & DC_HPDx_INT_POLARITY; + WREG32(DC_HPD3_INT_CONTROL, tmp); + tmp = RREG32(DC_HPD4_INT_CONTROL) & DC_HPDx_INT_POLARITY; + WREG32(DC_HPD4_INT_CONTROL, tmp); + tmp = RREG32(DC_HPD5_INT_CONTROL) & DC_HPDx_INT_POLARITY; + WREG32(DC_HPD5_INT_CONTROL, tmp); + tmp = RREG32(DC_HPD6_INT_CONTROL) & DC_HPDx_INT_POLARITY; + WREG32(DC_HPD6_INT_CONTROL, tmp); + } } static int si_irq_init(struct radeon_device *rdev) @@ -4384,7 +4392,7 @@ int si_irq_set(struct radeon_device *rdev) u32 cp_int_cntl = CNTX_BUSY_INT_ENABLE | CNTX_EMPTY_INT_ENABLE; u32 cp_int_cntl1 = 0, cp_int_cntl2 = 0; u32 crtc1 = 0, crtc2 = 0, crtc3 = 0, crtc4 = 0, crtc5 = 0, crtc6 = 0; - u32 hpd1, hpd2, hpd3, hpd4, hpd5, hpd6; + u32 hpd1 = 0, hpd2 = 0, hpd3 = 0, hpd4 = 0, hpd5 = 0, hpd6 = 0; u32 grbm_int_cntl = 0; u32 grph1 = 0, grph2 = 0, grph3 = 0, grph4 = 0, grph5 = 0, grph6 = 0; u32 dma_cntl, dma_cntl1; @@ -4401,12 +4409,14 @@ int si_irq_set(struct radeon_device *rdev) return 0; } - hpd1 = RREG32(DC_HPD1_INT_CONTROL) & ~DC_HPDx_INT_EN; - hpd2 = RREG32(DC_HPD2_INT_CONTROL) & ~DC_HPDx_INT_EN; - hpd3 = RREG32(DC_HPD3_INT_CONTROL) & ~DC_HPDx_INT_EN; - hpd4 = RREG32(DC_HPD4_INT_CONTROL) & ~DC_HPDx_INT_EN; - hpd5 = RREG32(DC_HPD5_INT_CONTROL) & ~DC_HPDx_INT_EN; - hpd6 = RREG32(DC_HPD6_INT_CONTROL) & ~DC_HPDx_INT_EN; + if (!ASIC_IS_NODCE(rdev)) { + hpd1 = RREG32(DC_HPD1_INT_CONTROL) & ~DC_HPDx_INT_EN; + hpd2 = RREG32(DC_HPD2_INT_CONTROL) & ~DC_HPDx_INT_EN; + hpd3 = RREG32(DC_HPD3_INT_CONTROL) & ~DC_HPDx_INT_EN; + hpd4 = RREG32(DC_HPD4_INT_CONTROL) & ~DC_HPDx_INT_EN; + hpd5 = RREG32(DC_HPD5_INT_CONTROL) & ~DC_HPDx_INT_EN; + hpd6 = RREG32(DC_HPD6_INT_CONTROL) & ~DC_HPDx_INT_EN; + } dma_cntl = RREG32(DMA_CNTL + DMA0_REGISTER_OFFSET) & ~TRAP_ENABLE; dma_cntl1 = RREG32(DMA_CNTL + DMA1_REGISTER_OFFSET) & ~TRAP_ENABLE; @@ -4497,8 +4507,10 @@ int si_irq_set(struct radeon_device *rdev) WREG32(GRBM_INT_CNTL, grbm_int_cntl); - WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, crtc1); - WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, crtc2); + if (rdev->num_crtc >= 2) { + WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, crtc1); + WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, crtc2); + } if (rdev->num_crtc >= 4) { WREG32(INT_MASK + EVERGREEN_CRTC2_REGISTER_OFFSET, crtc3); WREG32(INT_MASK + EVERGREEN_CRTC3_REGISTER_OFFSET, crtc4); @@ -4508,8 +4520,10 @@ int si_irq_set(struct radeon_device *rdev) WREG32(INT_MASK + EVERGREEN_CRTC5_REGISTER_OFFSET, crtc6); } - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, grph1); - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, grph2); + if (rdev->num_crtc >= 2) { + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, grph1); + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, grph2); + } if (rdev->num_crtc >= 4) { WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, grph3); WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, grph4); @@ -4519,12 +4533,14 @@ int si_irq_set(struct radeon_device *rdev) WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, grph6); } - WREG32(DC_HPD1_INT_CONTROL, hpd1); - WREG32(DC_HPD2_INT_CONTROL, hpd2); - WREG32(DC_HPD3_INT_CONTROL, hpd3); - WREG32(DC_HPD4_INT_CONTROL, hpd4); - WREG32(DC_HPD5_INT_CONTROL, hpd5); - WREG32(DC_HPD6_INT_CONTROL, hpd6); + if (!ASIC_IS_NODCE(rdev)) { + WREG32(DC_HPD1_INT_CONTROL, hpd1); + WREG32(DC_HPD2_INT_CONTROL, hpd2); + WREG32(DC_HPD3_INT_CONTROL, hpd3); + WREG32(DC_HPD4_INT_CONTROL, hpd4); + WREG32(DC_HPD5_INT_CONTROL, hpd5); + WREG32(DC_HPD6_INT_CONTROL, hpd6); + } return 0; } @@ -4533,6 +4549,9 @@ static inline void si_irq_ack(struct radeon_device *rdev) { u32 tmp; + if (ASIC_IS_NODCE(rdev)) + return; + rdev->irq.stat_regs.evergreen.disp_int = RREG32(DISP_INTERRUPT_STATUS); rdev->irq.stat_regs.evergreen.disp_int_cont = RREG32(DISP_INTERRUPT_STATUS_CONTINUE); rdev->irq.stat_regs.evergreen.disp_int_cont2 = RREG32(DISP_INTERRUPT_STATUS_CONTINUE2); -- cgit v0.10.2 From c04c00b4c74aab251ce4fd4757c955cc31ecc50d Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 31 Jul 2012 12:57:45 -0400 Subject: drm/radeon: fill in ucode loading support for Hainan MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Alex Deucher Reviewed-by: Christian König diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index 14472cc..2e0a086 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -60,6 +60,11 @@ MODULE_FIRMWARE("radeon/OLAND_me.bin"); MODULE_FIRMWARE("radeon/OLAND_ce.bin"); MODULE_FIRMWARE("radeon/OLAND_mc.bin"); MODULE_FIRMWARE("radeon/OLAND_rlc.bin"); +MODULE_FIRMWARE("radeon/HAINAN_pfp.bin"); +MODULE_FIRMWARE("radeon/HAINAN_me.bin"); +MODULE_FIRMWARE("radeon/HAINAN_ce.bin"); +MODULE_FIRMWARE("radeon/HAINAN_mc.bin"); +MODULE_FIRMWARE("radeon/HAINAN_rlc.bin"); extern int r600_ih_ring_alloc(struct radeon_device *rdev); extern void r600_ih_ring_fini(struct radeon_device *rdev); @@ -1062,6 +1067,45 @@ static const u32 oland_io_mc_regs[TAHITI_IO_MC_REGS_SIZE][2] = { {0x0000009f, 0x00a17730} }; +static const u32 hainan_io_mc_regs[TAHITI_IO_MC_REGS_SIZE][2] = { + {0x0000006f, 0x03044000}, + {0x00000070, 0x0480c018}, + {0x00000071, 0x00000040}, + {0x00000072, 0x01000000}, + {0x00000074, 0x000000ff}, + {0x00000075, 0x00143400}, + {0x00000076, 0x08ec0800}, + {0x00000077, 0x040000cc}, + {0x00000079, 0x00000000}, + {0x0000007a, 0x21000409}, + {0x0000007c, 0x00000000}, + {0x0000007d, 0xe8000000}, + {0x0000007e, 0x044408a8}, + {0x0000007f, 0x00000003}, + {0x00000080, 0x00000000}, + {0x00000081, 0x01000000}, + {0x00000082, 0x02000000}, + {0x00000083, 0x00000000}, + {0x00000084, 0xe3f3e4f4}, + {0x00000085, 0x00052024}, + {0x00000087, 0x00000000}, + {0x00000088, 0x66036603}, + {0x00000089, 0x01000000}, + {0x0000008b, 0x1c0a0000}, + {0x0000008c, 0xff010000}, + {0x0000008e, 0xffffefff}, + {0x0000008f, 0xfff3efff}, + {0x00000090, 0xfff3efbf}, + {0x00000094, 0x00101101}, + {0x00000095, 0x00000fff}, + {0x00000096, 0x00116fff}, + {0x00000097, 0x60010000}, + {0x00000098, 0x10010000}, + {0x00000099, 0x00006000}, + {0x0000009a, 0x00001000}, + {0x0000009f, 0x00a07730} +}; + /* ucode loading */ static int si_mc_load_microcode(struct radeon_device *rdev) { @@ -1095,6 +1139,11 @@ static int si_mc_load_microcode(struct radeon_device *rdev) ucode_size = OLAND_MC_UCODE_SIZE; regs_size = TAHITI_IO_MC_REGS_SIZE; break; + case CHIP_HAINAN: + io_mc_regs = (u32 *)&hainan_io_mc_regs; + ucode_size = OLAND_MC_UCODE_SIZE; + regs_size = TAHITI_IO_MC_REGS_SIZE; + break; } running = RREG32(MC_SEQ_SUP_CNTL) & RUN_MASK; @@ -1198,6 +1247,15 @@ static int si_init_microcode(struct radeon_device *rdev) rlc_req_size = SI_RLC_UCODE_SIZE * 4; mc_req_size = OLAND_MC_UCODE_SIZE * 4; break; + case CHIP_HAINAN: + chip_name = "HAINAN"; + rlc_chip_name = "HAINAN"; + pfp_req_size = SI_PFP_UCODE_SIZE * 4; + me_req_size = SI_PM4_UCODE_SIZE * 4; + ce_req_size = SI_CE_UCODE_SIZE * 4; + rlc_req_size = SI_RLC_UCODE_SIZE * 4; + mc_req_size = OLAND_MC_UCODE_SIZE * 4; + break; default: BUG(); } -- cgit v0.10.2 From 86a45cac3f86eb65bfdaa122acf1b9073f9e69b2 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 26 Jul 2012 19:04:20 -0400 Subject: drm/radeon: radeon-asic updates for Hainan MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Alex Deucher Reviewed-by: Christian König diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c index 6417132..44a7a41 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.c +++ b/drivers/gpu/drm/radeon/radeon_asic.c @@ -2051,9 +2051,12 @@ int radeon_asic_init(struct radeon_device *rdev) case CHIP_PITCAIRN: case CHIP_VERDE: case CHIP_OLAND: + case CHIP_HAINAN: rdev->asic = &si_asic; /* set num crtcs */ - if (rdev->family == CHIP_OLAND) + if (rdev->family == CHIP_HAINAN) + rdev->num_crtc = 0; + else if (rdev->family == CHIP_OLAND) rdev->num_crtc = 2; else rdev->num_crtc = 6; -- cgit v0.10.2 From 948bee3ff41c226b5c8f7d4a78f5562473a09de6 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 14 May 2013 12:08:35 -0400 Subject: drm/radeon: track which asics have UVD Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index ec26d68..142ce6c 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -1694,6 +1694,7 @@ struct radeon_device { int num_crtc; /* number of crtcs */ struct mutex dc_hw_i2c_mutex; /* display controller hw i2c mutex */ bool audio_enabled; + bool has_uvd; struct r600_audio audio_status; /* audio stuff */ struct notifier_block acpi_nb; /* only one userspace can use Hyperz features or CMASK at a time */ diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c index 44a7a41..06b8c19 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.c +++ b/drivers/gpu/drm/radeon/radeon_asic.c @@ -1935,6 +1935,8 @@ int radeon_asic_init(struct radeon_device *rdev) else rdev->num_crtc = 2; + rdev->has_uvd = false; + switch (rdev->family) { case CHIP_R100: case CHIP_RV100: @@ -1999,16 +2001,22 @@ int radeon_asic_init(struct radeon_device *rdev) case CHIP_RV635: case CHIP_RV670: rdev->asic = &r600_asic; + if (rdev->family == CHIP_R600) + rdev->has_uvd = false; + else + rdev->has_uvd = true; break; case CHIP_RS780: case CHIP_RS880: rdev->asic = &rs780_asic; + rdev->has_uvd = true; break; case CHIP_RV770: case CHIP_RV730: case CHIP_RV710: case CHIP_RV740: rdev->asic = &rv770_asic; + rdev->has_uvd = true; break; case CHIP_CEDAR: case CHIP_REDWOOD: @@ -2021,11 +2029,13 @@ int radeon_asic_init(struct radeon_device *rdev) else rdev->num_crtc = 6; rdev->asic = &evergreen_asic; + rdev->has_uvd = true; break; case CHIP_PALM: case CHIP_SUMO: case CHIP_SUMO2: rdev->asic = &sumo_asic; + rdev->has_uvd = true; break; case CHIP_BARTS: case CHIP_TURKS: @@ -2036,16 +2046,19 @@ int radeon_asic_init(struct radeon_device *rdev) else rdev->num_crtc = 6; rdev->asic = &btc_asic; + rdev->has_uvd = true; break; case CHIP_CAYMAN: rdev->asic = &cayman_asic; /* set num crtcs */ rdev->num_crtc = 6; + rdev->has_uvd = true; break; case CHIP_ARUBA: rdev->asic = &trinity_asic; /* set num crtcs */ rdev->num_crtc = 4; + rdev->has_uvd = true; break; case CHIP_TAHITI: case CHIP_PITCAIRN: @@ -2060,6 +2073,10 @@ int radeon_asic_init(struct radeon_device *rdev) rdev->num_crtc = 2; else rdev->num_crtc = 6; + if (rdev->family == CHIP_HAINAN) + rdev->has_uvd = false; + else + rdev->has_uvd = true; break; default: /* FIXME: not supported yet */ -- cgit v0.10.2 From 1df0d523ddb8683e2d5ca1a50ca92f76f908ef20 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 26 Apr 2013 18:03:44 -0400 Subject: drm/radeon: sun/hainan chips do not have UVD (v2) Skip UVD handling on them. v2: split has_uvd tracking into separate patch Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index 2e0a086..d708fc9 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -2635,9 +2635,11 @@ static void si_gpu_init(struct radeon_device *rdev) WREG32(HDP_ADDR_CONFIG, gb_addr_config); WREG32(DMA_TILING_CONFIG + DMA0_REGISTER_OFFSET, gb_addr_config); WREG32(DMA_TILING_CONFIG + DMA1_REGISTER_OFFSET, gb_addr_config); - WREG32(UVD_UDEC_ADDR_CONFIG, gb_addr_config); - WREG32(UVD_UDEC_DB_ADDR_CONFIG, gb_addr_config); - WREG32(UVD_UDEC_DBW_ADDR_CONFIG, gb_addr_config); + if (rdev->has_uvd) { + WREG32(UVD_UDEC_ADDR_CONFIG, gb_addr_config); + WREG32(UVD_UDEC_DB_ADDR_CONFIG, gb_addr_config); + WREG32(UVD_UDEC_DBW_ADDR_CONFIG, gb_addr_config); + } si_tiling_mode_table_init(rdev); @@ -5213,15 +5215,17 @@ static int si_startup(struct radeon_device *rdev) return r; } - r = rv770_uvd_resume(rdev); - if (!r) { - r = radeon_fence_driver_start_ring(rdev, - R600_RING_TYPE_UVD_INDEX); + if (rdev->has_uvd) { + r = rv770_uvd_resume(rdev); + if (!r) { + r = radeon_fence_driver_start_ring(rdev, + R600_RING_TYPE_UVD_INDEX); + if (r) + dev_err(rdev->dev, "UVD fences init error (%d).\n", r); + } if (r) - dev_err(rdev->dev, "UVD fences init error (%d).\n", r); + rdev->ring[R600_RING_TYPE_UVD_INDEX].ring_size = 0; } - if (r) - rdev->ring[R600_RING_TYPE_UVD_INDEX].ring_size = 0; /* Enable IRQ */ r = si_irq_init(rdev); @@ -5280,16 +5284,18 @@ static int si_startup(struct radeon_device *rdev) if (r) return r; - ring = &rdev->ring[R600_RING_TYPE_UVD_INDEX]; - if (ring->ring_size) { - r = radeon_ring_init(rdev, ring, ring->ring_size, - R600_WB_UVD_RPTR_OFFSET, - UVD_RBC_RB_RPTR, UVD_RBC_RB_WPTR, - 0, 0xfffff, RADEON_CP_PACKET2); - if (!r) - r = r600_uvd_init(rdev); - if (r) - DRM_ERROR("radeon: failed initializing UVD (%d).\n", r); + if (rdev->has_uvd) { + ring = &rdev->ring[R600_RING_TYPE_UVD_INDEX]; + if (ring->ring_size) { + r = radeon_ring_init(rdev, ring, ring->ring_size, + R600_WB_UVD_RPTR_OFFSET, + UVD_RBC_RB_RPTR, UVD_RBC_RB_WPTR, + 0, 0xfffff, RADEON_CP_PACKET2); + if (!r) + r = r600_uvd_init(rdev); + if (r) + DRM_ERROR("radeon: failed initializing UVD (%d).\n", r); + } } r = radeon_ib_pool_init(rdev); @@ -5338,8 +5344,10 @@ int si_suspend(struct radeon_device *rdev) radeon_vm_manager_fini(rdev); si_cp_enable(rdev, false); cayman_dma_stop(rdev); - r600_uvd_rbc_stop(rdev); - radeon_uvd_suspend(rdev); + if (rdev->has_uvd) { + r600_uvd_rbc_stop(rdev); + radeon_uvd_suspend(rdev); + } si_irq_suspend(rdev); radeon_wb_disable(rdev); si_pcie_gart_disable(rdev); @@ -5427,11 +5435,13 @@ int si_init(struct radeon_device *rdev) ring->ring_obj = NULL; r600_ring_init(rdev, ring, 64 * 1024); - r = radeon_uvd_init(rdev); - if (!r) { - ring = &rdev->ring[R600_RING_TYPE_UVD_INDEX]; - ring->ring_obj = NULL; - r600_ring_init(rdev, ring, 4096); + if (rdev->has_uvd) { + r = radeon_uvd_init(rdev); + if (!r) { + ring = &rdev->ring[R600_RING_TYPE_UVD_INDEX]; + ring->ring_obj = NULL; + r600_ring_init(rdev, ring, 4096); + } } rdev->ih.ring_obj = NULL; @@ -5479,7 +5489,8 @@ void si_fini(struct radeon_device *rdev) radeon_vm_manager_fini(rdev); radeon_ib_pool_fini(rdev); radeon_irq_kms_fini(rdev); - radeon_uvd_fini(rdev); + if (rdev->has_uvd) + radeon_uvd_fini(rdev); si_pcie_gart_fini(rdev); r600_vram_scratch_fini(rdev); radeon_gem_fini(rdev); -- cgit v0.10.2 From fffbdda4eee69f99b8c798d8eaca91c7e0513f08 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 13 May 2013 13:36:23 -0400 Subject: drm/radeon: add golden register settings for Hainan (v2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit v2: fix typo Signed-off-by: Alex Deucher Reviewed-by: Christian König diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index d708fc9..5ffade6 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -270,6 +270,40 @@ static const u32 oland_golden_registers[] = 0x15c0, 0x000c0fc0, 0x000c0400 }; +static const u32 hainan_golden_registers[] = +{ + 0x9a10, 0x00010000, 0x00018208, + 0x9830, 0xffffffff, 0x00000000, + 0x9834, 0xf00fffff, 0x00000400, + 0x9838, 0x0002021c, 0x00020200, + 0xd0c0, 0xff000fff, 0x00000100, + 0xd030, 0x000300c0, 0x00800040, + 0xd8c0, 0xff000fff, 0x00000100, + 0xd830, 0x000300c0, 0x00800040, + 0x2ae4, 0x00073ffe, 0x000022a2, + 0x240c, 0x000007ff, 0x00000000, + 0x8a14, 0xf000001f, 0x00000007, + 0x8b24, 0xffffffff, 0x00ffffff, + 0x8b10, 0x0000ff0f, 0x00000000, + 0x28a4c, 0x07ffffff, 0x4e000000, + 0x28350, 0x3f3f3fff, 0x00000000, + 0x30, 0x000000ff, 0x0040, + 0x34, 0x00000040, 0x00004040, + 0x9100, 0x03e00000, 0x03600000, + 0x9060, 0x0000007f, 0x00000020, + 0x9508, 0x00010000, 0x00010000, + 0xac14, 0x000003ff, 0x000000f1, + 0xac10, 0xffffffff, 0x00000000, + 0xac0c, 0xffffffff, 0x00003210, + 0x88d4, 0x0000001f, 0x00000010, + 0x15c0, 0x000c0fc0, 0x000c0400 +}; + +static const u32 hainan_golden_registers2[] = +{ + 0x98f8, 0xffffffff, 0x02010001 +}; + static const u32 tahiti_mgcg_cgcg_init[] = { 0xc400, 0xffffffff, 0xfffffffc, @@ -678,6 +712,83 @@ static const u32 oland_mgcg_cgcg_init[] = 0xd8c0, 0xfffffff0, 0x00000100 }; +static const u32 hainan_mgcg_cgcg_init[] = +{ + 0xc400, 0xffffffff, 0xfffffffc, + 0x802c, 0xffffffff, 0xe0000000, + 0x9a60, 0xffffffff, 0x00000100, + 0x92a4, 0xffffffff, 0x00000100, + 0xc164, 0xffffffff, 0x00000100, + 0x9774, 0xffffffff, 0x00000100, + 0x8984, 0xffffffff, 0x06000100, + 0x8a18, 0xffffffff, 0x00000100, + 0x92a0, 0xffffffff, 0x00000100, + 0xc380, 0xffffffff, 0x00000100, + 0x8b28, 0xffffffff, 0x00000100, + 0x9144, 0xffffffff, 0x00000100, + 0x8d88, 0xffffffff, 0x00000100, + 0x8d8c, 0xffffffff, 0x00000100, + 0x9030, 0xffffffff, 0x00000100, + 0x9034, 0xffffffff, 0x00000100, + 0x9038, 0xffffffff, 0x00000100, + 0x903c, 0xffffffff, 0x00000100, + 0xad80, 0xffffffff, 0x00000100, + 0xac54, 0xffffffff, 0x00000100, + 0x897c, 0xffffffff, 0x06000100, + 0x9868, 0xffffffff, 0x00000100, + 0x9510, 0xffffffff, 0x00000100, + 0xaf04, 0xffffffff, 0x00000100, + 0xae04, 0xffffffff, 0x00000100, + 0x949c, 0xffffffff, 0x00000100, + 0x802c, 0xffffffff, 0xe0000000, + 0x9160, 0xffffffff, 0x00010000, + 0x9164, 0xffffffff, 0x00030002, + 0x9168, 0xffffffff, 0x00040007, + 0x916c, 0xffffffff, 0x00060005, + 0x9170, 0xffffffff, 0x00090008, + 0x9174, 0xffffffff, 0x00020001, + 0x9178, 0xffffffff, 0x00040003, + 0x917c, 0xffffffff, 0x00000007, + 0x9180, 0xffffffff, 0x00060005, + 0x9184, 0xffffffff, 0x00090008, + 0x9188, 0xffffffff, 0x00030002, + 0x918c, 0xffffffff, 0x00050004, + 0x9190, 0xffffffff, 0x00000008, + 0x9194, 0xffffffff, 0x00070006, + 0x9198, 0xffffffff, 0x000a0009, + 0x919c, 0xffffffff, 0x00040003, + 0x91a0, 0xffffffff, 0x00060005, + 0x91a4, 0xffffffff, 0x00000009, + 0x91a8, 0xffffffff, 0x00080007, + 0x91ac, 0xffffffff, 0x000b000a, + 0x91b0, 0xffffffff, 0x00050004, + 0x91b4, 0xffffffff, 0x00070006, + 0x91b8, 0xffffffff, 0x0008000b, + 0x91bc, 0xffffffff, 0x000a0009, + 0x91c0, 0xffffffff, 0x000d000c, + 0x91c4, 0xffffffff, 0x00060005, + 0x91c8, 0xffffffff, 0x00080007, + 0x91cc, 0xffffffff, 0x0000000b, + 0x91d0, 0xffffffff, 0x000a0009, + 0x91d4, 0xffffffff, 0x000d000c, + 0x9150, 0xffffffff, 0x96940200, + 0x8708, 0xffffffff, 0x00900100, + 0xc478, 0xffffffff, 0x00000080, + 0xc404, 0xffffffff, 0x0020003f, + 0x30, 0xffffffff, 0x0000001c, + 0x34, 0x000f0000, 0x000f0000, + 0x160c, 0xffffffff, 0x00000100, + 0x1024, 0xffffffff, 0x00000100, + 0x20a8, 0xffffffff, 0x00000104, + 0x264c, 0x000c0000, 0x000c0000, + 0x2648, 0x000c0000, 0x000c0000, + 0x2f50, 0x00000001, 0x00000001, + 0x30cc, 0xc0000fff, 0x00000104, + 0xc1e4, 0x00000001, 0x00000001, + 0xd0c0, 0xfffffff0, 0x00000100, + 0xd8c0, 0xfffffff0, 0x00000100 +}; + static u32 verde_pg_init[] = { 0x353c, 0xffffffff, 0x40000, @@ -858,6 +969,17 @@ static void si_init_golden_registers(struct radeon_device *rdev) oland_mgcg_cgcg_init, (const u32)ARRAY_SIZE(oland_mgcg_cgcg_init)); break; + case CHIP_HAINAN: + radeon_program_register_sequence(rdev, + hainan_golden_registers, + (const u32)ARRAY_SIZE(hainan_golden_registers)); + radeon_program_register_sequence(rdev, + hainan_golden_registers2, + (const u32)ARRAY_SIZE(hainan_golden_registers2)); + radeon_program_register_sequence(rdev, + hainan_mgcg_cgcg_init, + (const u32)ARRAY_SIZE(hainan_mgcg_cgcg_init)); + break; default: break; } -- cgit v0.10.2 From 2a0f90551a76a626fd6a606877c8635f52f066e6 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 27 Jul 2012 18:48:52 -0400 Subject: drm/radeon: add Hainan pci ids MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Alex Deucher Reviewed-by: Christian König diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index c2af598..bb1bc48 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -152,6 +152,12 @@ {0x1002, 0x6621, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6623, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6631, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6660, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6663, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6664, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6665, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6667, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x666F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6700, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6701, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6702, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \ -- cgit v0.10.2 From f3f011750a18abc389ef1b0d504fbeeacf641919 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 20 May 2013 10:20:21 -0600 Subject: Revert "x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0" This reverts commit dd72be99d11dbf738d910a38479ce414a51eb21e. Andy Shevchenko reported that this commit broke Intel Medfield devices. Reference: https://lkml.kernel.org/r/CAHp75Vdf6gFZChS47=grUygHBDWcoOWDYPzw+Zj5bdVCWj85Jw@mail.gmail.com Reported-by: Andy Shevchenko Signed-off-by: Bjorn Helgaas diff --git a/arch/x86/pci/mrst.c b/arch/x86/pci/mrst.c index 0e0fabf..6eb18c4 100644 --- a/arch/x86/pci/mrst.c +++ b/arch/x86/pci/mrst.c @@ -141,11 +141,6 @@ static int pci_device_update_fixed(struct pci_bus *bus, unsigned int devfn, */ static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg) { - if (bus == 0 && (devfn == PCI_DEVFN(2, 0) - || devfn == PCI_DEVFN(0, 0) - || devfn == PCI_DEVFN(3, 0))) - return 1; - /* This is a workaround for A0 LNC bug where PCI status register does * not have new CAP bit set. can not be written by SW either. * @@ -155,7 +150,10 @@ static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg) */ if (reg >= 0x100 || reg == PCI_STATUS || reg == PCI_HEADER_TYPE) return 0; - + if (bus == 0 && (devfn == PCI_DEVFN(2, 0) + || devfn == PCI_DEVFN(0, 0) + || devfn == PCI_DEVFN(3, 0))) + return 1; return 0; /* langwell on others */ } -- cgit v0.10.2 From e1e5762823be84cb97f629bdfecb97af3d187406 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 20 May 2013 17:54:35 +0200 Subject: spi: topcliff-pch: Pass correct pointer to free_irq() free_irq() expects the same pointer that was passed to request_irq(), otherwise the IRQ is not freed. The issue was found using the following coccinelle script: @r1@ type T; T devid; @@ request_irq(..., devid) @r2@ type r1.T; T devid; position p; @@ free_irq@p(..., devid) @@ position p != r2.p; @@ *free_irq@p(...) Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c index 35f60bd..963e0f3 100644 --- a/drivers/spi/spi-topcliff-pch.c +++ b/drivers/spi/spi-topcliff-pch.c @@ -1487,7 +1487,7 @@ static int pch_spi_pd_probe(struct platform_device *plat_dev) return 0; err_spi_register_master: - free_irq(board_dat->pdev->irq, board_dat); + free_irq(board_dat->pdev->irq, data); err_request_irq: pch_spi_free_resources(board_dat, data); err_spi_get_resources: -- cgit v0.10.2 From 7ec892ef5f1bd707e2d5ab128069cb6af75c7f07 Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Wed, 10 Apr 2013 19:30:38 +0900 Subject: ARM: dts: Enabling samsung-usb2phy driver for exynos5250 Adding usbphy node for Exynos5250 along with the necessary device data to be parsed. Signed-off-by: Vivek Gautam Signed-off-by: Kukjin Kim diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 98dfc3e..0673524 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -497,6 +497,21 @@ clock-names = "usbhost"; }; + usbphy@12130000 { + compatible = "samsung,exynos5250-usb2phy"; + reg = <0x12130000 0x100>; + clocks = <&clock 1>, <&clock 285>; + clock-names = "ext_xtal", "usbhost"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbphy-sys { + reg = <0x10040704 0x8>, + <0x10050230 0x4>; + }; + }; + amba { #address-cells = <1>; #size-cells = <1>; -- cgit v0.10.2 From 62cc4d595fe96106ff793cbebbff051179d7619e Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 20 May 2013 11:28:35 -0500 Subject: ASoC: wm5110: Add missing speaker initialisation Add callback to initialise the speaker in the core following the recent changes to handling of integration with the thermal interrupts. Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c index 731884e..c00480b 100644 --- a/sound/soc/codecs/wm5110.c +++ b/sound/soc/codecs/wm5110.c @@ -976,6 +976,8 @@ static int wm5110_codec_probe(struct snd_soc_codec *codec) if (ret != 0) return ret; + arizona_init_spk(codec); + snd_soc_dapm_disable_pin(&codec->dapm, "HAPTICS"); priv->core.arizona->dapm = &codec->dapm; -- cgit v0.10.2 From 0f119a840b128f18b20608f0d33895e85f381105 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 19 May 2013 19:11:54 +0800 Subject: gpio: mcp23s08: Fix build error when CONFIG_SPI_MASTER=y && CONFIG_I2C=m This patch fixes below build error when CONFIG_SPI_MASTER=y && CONFIG_I2C=m && CONFIG_GPIO_MCP23S08=y. LD init/built-in.o drivers/built-in.o: In function `mcp23017_write': clkdev.c:(.text+0x1e14): undefined reference to `i2c_smbus_write_word_data' drivers/built-in.o: In function `mcp23017_read': clkdev.c:(.text+0x1e24): undefined reference to `i2c_smbus_read_word_data' drivers/built-in.o: In function `mcp23008_write': clkdev.c:(.text+0x1e8c): undefined reference to `i2c_smbus_write_byte_data' drivers/built-in.o: In function `mcp23008_read': clkdev.c:(.text+0x1e98): undefined reference to `i2c_smbus_read_byte_data' drivers/built-in.o: In function `mcp23008_read_regs': clkdev.c:(.text+0x1ed0): undefined reference to `i2c_smbus_read_byte_data' drivers/built-in.o: In function `mcp23s08_init': clkdev.c:(.init.text+0x30): undefined reference to `i2c_register_driver' drivers/built-in.o: In function `mcp23s08_exit': clkdev.c:(.exit.text+0x30): undefined reference to `i2c_del_driver' make: *** [vmlinux] Error 1 When CONFIG_I2C=m, meaning we can't build the drivers in with I2C support. Thus don't allow the drivers to be compiled as built-in when CONFIG_I2C=m. The real fix though is to break the driver apart into a SPI part, an I2C part and a common part. But that's something for 3.11 while this is something for 3.10/stable. Signed-off-by: Axel Lin Reviewed-by: Andy Shevchenko Signed-off-by: Linus Walleij diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 87d5670..573c449 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -636,7 +636,7 @@ config GPIO_MAX7301 config GPIO_MCP23S08 tristate "Microchip MCP23xxx I/O expander" - depends on SPI_MASTER || I2C + depends on (SPI_MASTER && !I2C) || I2C help SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017 I/O expanders. -- cgit v0.10.2 From 2b8b2797142c7951e635c6eec5d1705ee9bc45c5 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Sun, 19 May 2013 22:12:43 +0200 Subject: ARM: plat-orion: Fix num_resources and id for ge10 and ge11 When platform data were moved from arch/arm/mach-mv78xx0/common.c to arch/arm/plat-orion/common.c with the commit "7e3819d ARM: orion: Consolidate ethernet platform data", there were few typo made on gigabit Ethernet interface ge10 and ge11. This commit writes back their initial value, which allows to use this interfaces again. Signed-off-by: Gregory CLEMENT Acked-by: Andrew Lunn Cc: # v3.0.x Signed-off-by: Jason Cooper diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index 251f827..c019b7a 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -383,7 +383,7 @@ static struct resource orion_ge10_shared_resources[] = { static struct platform_device orion_ge10_shared = { .name = MV643XX_ETH_SHARED_NAME, - .id = 1, + .id = 2, .dev = { .platform_data = &orion_ge10_shared_data, }, @@ -398,8 +398,8 @@ static struct resource orion_ge10_resources[] = { static struct platform_device orion_ge10 = { .name = MV643XX_ETH_NAME, - .id = 1, - .num_resources = 2, + .id = 2, + .num_resources = 1, .resource = orion_ge10_resources, .dev = { .coherent_dma_mask = DMA_BIT_MASK(32), @@ -432,7 +432,7 @@ static struct resource orion_ge11_shared_resources[] = { static struct platform_device orion_ge11_shared = { .name = MV643XX_ETH_SHARED_NAME, - .id = 1, + .id = 3, .dev = { .platform_data = &orion_ge11_shared_data, }, @@ -447,8 +447,8 @@ static struct resource orion_ge11_resources[] = { static struct platform_device orion_ge11 = { .name = MV643XX_ETH_NAME, - .id = 1, - .num_resources = 2, + .id = 3, + .num_resources = 1, .resource = orion_ge11_resources, .dev = { .coherent_dma_mask = DMA_BIT_MASK(32), -- cgit v0.10.2 From 489e138eec96f529c5e8d4cd3ea45882ecdbf5ca Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Mon, 20 May 2013 16:13:27 +0200 Subject: ARM: dts: mvebu: Fix wrong the address reg value for the L2-cache node During the conversion to the internal-regs' subnode, the L2-cache node haven not been converted (due to a wrong choice made by myself during the resolution of the merge conflict when I rebased the commit). This leads to wrong address for L2 cache which prevent it to be used on Armada 370. This commit fix the address reg of the e L2-cache node. Signed-off-by: Gregory CLEMENT Signed-off-by: Jason Cooper diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index a1a8703..aee2b18 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -39,7 +39,7 @@ L2: l2-cache { compatible = "marvell,aurora-outer-cache"; - reg = <0xd0008000 0x1000>; + reg = <0x08000 0x1000>; cache-id-part = <0x100>; wt-override; }; -- cgit v0.10.2 From 2519f9abced15b4327f03d7b8666827517582c29 Mon Sep 17 00:00:00 2001 From: David Cohen Date: Mon, 6 May 2013 16:11:03 -0700 Subject: gpio-langwell: fix irq conflicts when DT is not used When DT is not used IOAPIC does not register irq domain. As result IOAPIC won't care about gpio-langwell's virq and may cause conflict if an irq number is equal to gpio-langwell's virq mapped beforehand. This patch tells gpio_langwell to not ignore irq_base if != 0 and preferably use it to avoid the conflict. If DT is used, irq_base can safely be 0. Signed-off-by: David Cohen Acked-by: Mika Westerberg Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpio-langwell.c b/drivers/gpio/gpio-langwell.c index 634c3d3..62ef10a 100644 --- a/drivers/gpio/gpio-langwell.c +++ b/drivers/gpio/gpio-langwell.c @@ -324,6 +324,7 @@ static int lnw_gpio_probe(struct pci_dev *pdev, resource_size_t start, len; struct lnw_gpio *lnw; u32 gpio_base; + u32 irq_base; int retval; int ngpio = id->driver_data; @@ -345,6 +346,7 @@ static int lnw_gpio_probe(struct pci_dev *pdev, retval = -EFAULT; goto err_ioremap; } + irq_base = *(u32 *)base; gpio_base = *((u32 *)base + 1); /* release the IO mapping, since we already get the info from bar1 */ iounmap(base); @@ -365,13 +367,6 @@ static int lnw_gpio_probe(struct pci_dev *pdev, goto err_ioremap; } - lnw->domain = irq_domain_add_linear(pdev->dev.of_node, ngpio, - &lnw_gpio_irq_ops, lnw); - if (!lnw->domain) { - retval = -ENOMEM; - goto err_ioremap; - } - lnw->reg_base = base; lnw->chip.label = dev_name(&pdev->dev); lnw->chip.request = lnw_gpio_request; @@ -384,6 +379,14 @@ static int lnw_gpio_probe(struct pci_dev *pdev, lnw->chip.ngpio = ngpio; lnw->chip.can_sleep = 0; lnw->pdev = pdev; + + lnw->domain = irq_domain_add_simple(pdev->dev.of_node, ngpio, irq_base, + &lnw_gpio_irq_ops, lnw); + if (!lnw->domain) { + retval = -ENOMEM; + goto err_ioremap; + } + pci_set_drvdata(pdev, lnw); retval = gpiochip_add(&lnw->chip); if (retval) { -- cgit v0.10.2 From 90dae4ebf03063a70d992aad00d5f5a607c31db8 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 29 Apr 2013 16:07:18 +0200 Subject: gpio: mxs: Use set and clear capabilities of the gpio controller The current driver doesn't use the set and clear registers found on the mxs gpio controller. This leads the generic gpio controller to be using some internal value to avoid looking up the value stored in the registers, making it behave pretty much like a cache. This raises some coherency problem when a gpio is not modified by the gpio controller, while it can easily be fixed by using the set and clear registers. Signed-off-by: Maxime Ripard Acked-by: Shawn Guo Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c index 25000b0..f8e6af2 100644 --- a/drivers/gpio/gpio-mxs.c +++ b/drivers/gpio/gpio-mxs.c @@ -326,7 +326,8 @@ static int mxs_gpio_probe(struct platform_device *pdev) err = bgpio_init(&port->bgc, &pdev->dev, 4, port->base + PINCTRL_DIN(port), - port->base + PINCTRL_DOUT(port), NULL, + port->base + PINCTRL_DOUT(port) + MXS_SET, + port->base + PINCTRL_DOUT(port) + MXS_CLR, port->base + PINCTRL_DOE(port), NULL, 0); if (err) goto out_irqdesc_free; -- cgit v0.10.2 From d7e5075044f6c4e85f671cb88f99187509f4a2b0 Mon Sep 17 00:00:00 2001 From: Lisa Nguyen Date: Wed, 15 May 2013 23:47:11 -0700 Subject: xen/xenbus: Fixed indentation error in switch case Fixed the indentation error in the switch case in xenbus_dev_backend.c Signed-off-by: Lisa Nguyen Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/xenbus/xenbus_dev_backend.c b/drivers/xen/xenbus/xenbus_dev_backend.c index d730008..120ae15 100644 --- a/drivers/xen/xenbus/xenbus_dev_backend.c +++ b/drivers/xen/xenbus/xenbus_dev_backend.c @@ -76,16 +76,14 @@ static long xenbus_backend_ioctl(struct file *file, unsigned int cmd, unsigned l return -EPERM; switch (cmd) { - case IOCTL_XENBUS_BACKEND_EVTCHN: - if (xen_store_evtchn > 0) - return xen_store_evtchn; - return -ENODEV; - - case IOCTL_XENBUS_BACKEND_SETUP: - return xenbus_alloc(data); - - default: - return -ENOTTY; + case IOCTL_XENBUS_BACKEND_EVTCHN: + if (xen_store_evtchn > 0) + return xen_store_evtchn; + return -ENODEV; + case IOCTL_XENBUS_BACKEND_SETUP: + return xenbus_alloc(data); + default: + return -ENOTTY; } } -- cgit v0.10.2 From 3d645b02d9c6254caf51d9d78e6d9caf72990b33 Mon Sep 17 00:00:00 2001 From: Lisa Nguyen Date: Wed, 15 May 2013 23:48:03 -0700 Subject: xen/xenbus: Fixed over 80 character limit issue Fixed the format length of the xenbus_backend_ioctl() function to meet the 80 character limit in xenbus_dev_backend.c Signed-off-by: Lisa Nguyen Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/xenbus/xenbus_dev_backend.c b/drivers/xen/xenbus/xenbus_dev_backend.c index 120ae15..a6f42fc0 100644 --- a/drivers/xen/xenbus/xenbus_dev_backend.c +++ b/drivers/xen/xenbus/xenbus_dev_backend.c @@ -70,7 +70,8 @@ static long xenbus_alloc(domid_t domid) return err; } -static long xenbus_backend_ioctl(struct file *file, unsigned int cmd, unsigned long data) +static long xenbus_backend_ioctl(struct file *file, unsigned int cmd, + unsigned long data) { if (!capable(CAP_SYS_ADMIN)) return -EPERM; -- cgit v0.10.2 From fce92683570c2ddcdb82cde67b0b07800106fbd9 Mon Sep 17 00:00:00 2001 From: Lisa Nguyen Date: Wed, 15 May 2013 22:59:40 -0700 Subject: xen: Fixed assignment error in if statement Fixed assignment error in if statement in balloon.c Signed-off-by: Lisa Nguyen Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index a56776d..930fb68 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -407,7 +407,8 @@ static enum bp_state decrease_reservation(unsigned long nr_pages, gfp_t gfp) nr_pages = ARRAY_SIZE(frame_list); for (i = 0; i < nr_pages; i++) { - if ((page = alloc_page(gfp)) == NULL) { + page = alloc_page(gfp); + if (page == NULL) { nr_pages = i; state = BP_EAGAIN; break; -- cgit v0.10.2 From 774d5f14ee1ecac55f42a84ff35eb00b896b00b6 Mon Sep 17 00:00:00 2001 From: Andy Adamson Date: Mon, 20 May 2013 14:13:50 -0400 Subject: NFSv4.1 Fix a pNFS session draining deadlock On a CB_RECALL the callback service thread flushes the inode using filemap_flush prior to scheduling the state manager thread to return the delegation. When pNFS is used and I/O has not yet gone to the data server servicing the inode, a LAYOUTGET can preceed the I/O. Unlike the async filemap_flush call, the LAYOUTGET must proceed to completion. If the state manager starts to recover data while the inode flush is sending the LAYOUTGET, a deadlock occurs as the callback service thread holds the single callback session slot until the flushing is done which blocks the state manager thread, and the state manager thread has set the session draining bit which puts the inode flush LAYOUTGET RPC to sleep on the forechannel slot table waitq. Separate the draining of the back channel from the draining of the fore channel by moving the NFS4_SESSION_DRAINING bit from session scope into the fore and back slot tables. Drain the back channel first allowing the LAYOUTGET call to proceed (and fail) so the callback service thread frees the callback slot. Then proceed with draining the forechannel. Signed-off-by: Andy Adamson Signed-off-by: Trond Myklebust diff --git a/fs/nfs/callback_proc.c b/fs/nfs/callback_proc.c index a13d26e..0bc2768 100644 --- a/fs/nfs/callback_proc.c +++ b/fs/nfs/callback_proc.c @@ -414,7 +414,7 @@ __be32 nfs4_callback_sequence(struct cb_sequenceargs *args, spin_lock(&tbl->slot_tbl_lock); /* state manager is resetting the session */ - if (test_bit(NFS4_SESSION_DRAINING, &clp->cl_session->session_state)) { + if (test_bit(NFS4_SLOT_TBL_DRAINING, &tbl->slot_tbl_state)) { spin_unlock(&tbl->slot_tbl_lock); status = htonl(NFS4ERR_DELAY); /* Return NFS4ERR_BADSESSION if we're draining the session diff --git a/fs/nfs/callback_xdr.c b/fs/nfs/callback_xdr.c index 59461c9..a35582c 100644 --- a/fs/nfs/callback_xdr.c +++ b/fs/nfs/callback_xdr.c @@ -763,7 +763,7 @@ static void nfs4_callback_free_slot(struct nfs4_session *session) * A single slot, so highest used slotid is either 0 or -1 */ tbl->highest_used_slotid = NFS4_NO_SLOT; - nfs4_session_drain_complete(session, tbl); + nfs4_slot_tbl_drain_complete(tbl); spin_unlock(&tbl->slot_tbl_lock); } diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 8fbc100..4e2fe71 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -572,7 +572,7 @@ int nfs41_setup_sequence(struct nfs4_session *session, task->tk_timeout = 0; spin_lock(&tbl->slot_tbl_lock); - if (test_bit(NFS4_SESSION_DRAINING, &session->session_state) && + if (test_bit(NFS4_SLOT_TBL_DRAINING, &tbl->slot_tbl_state) && !args->sa_privileged) { /* The state manager will wait until the slot table is empty */ dprintk("%s session is draining\n", __func__); diff --git a/fs/nfs/nfs4session.c b/fs/nfs/nfs4session.c index ebda5f4..c4e225e 100644 --- a/fs/nfs/nfs4session.c +++ b/fs/nfs/nfs4session.c @@ -73,7 +73,7 @@ void nfs4_free_slot(struct nfs4_slot_table *tbl, struct nfs4_slot *slot) tbl->highest_used_slotid = new_max; else { tbl->highest_used_slotid = NFS4_NO_SLOT; - nfs4_session_drain_complete(tbl->session, tbl); + nfs4_slot_tbl_drain_complete(tbl); } } dprintk("%s: slotid %u highest_used_slotid %d\n", __func__, @@ -226,7 +226,7 @@ static bool nfs41_assign_slot(struct rpc_task *task, void *pslot) struct nfs4_slot *slot = pslot; struct nfs4_slot_table *tbl = slot->table; - if (nfs4_session_draining(tbl->session) && !args->sa_privileged) + if (nfs4_slot_tbl_draining(tbl) && !args->sa_privileged) return false; slot->generation = tbl->generation; args->sa_slot = slot; diff --git a/fs/nfs/nfs4session.h b/fs/nfs/nfs4session.h index 6f3cb39..ff7d9f0 100644 --- a/fs/nfs/nfs4session.h +++ b/fs/nfs/nfs4session.h @@ -25,6 +25,10 @@ struct nfs4_slot { }; /* Sessions */ +enum nfs4_slot_tbl_state { + NFS4_SLOT_TBL_DRAINING, +}; + #define SLOT_TABLE_SZ DIV_ROUND_UP(NFS4_MAX_SLOT_TABLE, 8*sizeof(long)) struct nfs4_slot_table { struct nfs4_session *session; /* Parent session */ @@ -43,6 +47,7 @@ struct nfs4_slot_table { unsigned long generation; /* Generation counter for target_highest_slotid */ struct completion complete; + unsigned long slot_tbl_state; }; /* @@ -68,7 +73,6 @@ struct nfs4_session { enum nfs4_session_state { NFS4_SESSION_INITING, - NFS4_SESSION_DRAINING, }; #if defined(CONFIG_NFS_V4_1) @@ -88,12 +92,11 @@ extern void nfs4_destroy_session(struct nfs4_session *session); extern int nfs4_init_session(struct nfs_server *server); extern int nfs4_init_ds_session(struct nfs_client *, unsigned long); -extern void nfs4_session_drain_complete(struct nfs4_session *session, - struct nfs4_slot_table *tbl); +extern void nfs4_slot_tbl_drain_complete(struct nfs4_slot_table *tbl); -static inline bool nfs4_session_draining(struct nfs4_session *session) +static inline bool nfs4_slot_tbl_draining(struct nfs4_slot_table *tbl) { - return !!test_bit(NFS4_SESSION_DRAINING, &session->session_state); + return !!test_bit(NFS4_SLOT_TBL_DRAINING, &tbl->slot_tbl_state); } bool nfs41_wake_and_assign_slot(struct nfs4_slot_table *tbl, diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index 300d17d..1fab140 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -241,7 +241,7 @@ static void nfs4_end_drain_session(struct nfs_client *clp) if (ses == NULL) return; tbl = &ses->fc_slot_table; - if (test_and_clear_bit(NFS4_SESSION_DRAINING, &ses->session_state)) { + if (test_and_clear_bit(NFS4_SLOT_TBL_DRAINING, &tbl->slot_tbl_state)) { spin_lock(&tbl->slot_tbl_lock); nfs41_wake_slot_table(tbl); spin_unlock(&tbl->slot_tbl_lock); @@ -251,15 +251,15 @@ static void nfs4_end_drain_session(struct nfs_client *clp) /* * Signal state manager thread if session fore channel is drained */ -void nfs4_session_drain_complete(struct nfs4_session *session, - struct nfs4_slot_table *tbl) +void nfs4_slot_tbl_drain_complete(struct nfs4_slot_table *tbl) { - if (nfs4_session_draining(session)) + if (nfs4_slot_tbl_draining(tbl)) complete(&tbl->complete); } -static int nfs4_wait_on_slot_tbl(struct nfs4_slot_table *tbl) +static int nfs4_drain_slot_tbl(struct nfs4_slot_table *tbl) { + set_bit(NFS4_SLOT_TBL_DRAINING, &tbl->slot_tbl_state); spin_lock(&tbl->slot_tbl_lock); if (tbl->highest_used_slotid != NFS4_NO_SLOT) { INIT_COMPLETION(tbl->complete); @@ -275,13 +275,12 @@ static int nfs4_begin_drain_session(struct nfs_client *clp) struct nfs4_session *ses = clp->cl_session; int ret = 0; - set_bit(NFS4_SESSION_DRAINING, &ses->session_state); /* back channel */ - ret = nfs4_wait_on_slot_tbl(&ses->bc_slot_table); + ret = nfs4_drain_slot_tbl(&ses->bc_slot_table); if (ret) return ret; /* fore channel */ - return nfs4_wait_on_slot_tbl(&ses->fc_slot_table); + return nfs4_drain_slot_tbl(&ses->fc_slot_table); } static void nfs41_finish_session_reset(struct nfs_client *clp) -- cgit v0.10.2 From cfb10898efe1bc1f3eb8d8f37f164d9e2ac8b43a Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 19 May 2013 14:00:47 +0800 Subject: gpio: Don't override the error code in probe error handling Otherwise, we return 0 in probe error paths when gpiochip_remove() returns 0. Also show error message if gpiochip_remove() fails. Signed-off-by: Axel Lin Cc: Tomoya MORINAGA Cc: Denis Turischev Cc: Lars Poeschel Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpio-ml-ioh.c b/drivers/gpio/gpio-ml-ioh.c index b733665..0966f26 100644 --- a/drivers/gpio/gpio-ml-ioh.c +++ b/drivers/gpio/gpio-ml-ioh.c @@ -496,8 +496,7 @@ err_irq_alloc_descs: err_gpiochip_add: while (--i >= 0) { chip--; - ret = gpiochip_remove(&chip->gpio); - if (ret) + if (gpiochip_remove(&chip->gpio)) dev_err(&pdev->dev, "Failed gpiochip_remove(%d)\n", i); } kfree(chip_save); diff --git a/drivers/gpio/gpio-pch.c b/drivers/gpio/gpio-pch.c index cdf5996..0fec097 100644 --- a/drivers/gpio/gpio-pch.c +++ b/drivers/gpio/gpio-pch.c @@ -424,8 +424,7 @@ end: err_request_irq: irq_free_descs(irq_base, gpio_pins[chip->ioh]); - ret = gpiochip_remove(&chip->gpio); - if (ret) + if (gpiochip_remove(&chip->gpio)) dev_err(&pdev->dev, "%s gpiochip_remove failed\n", __func__); err_gpiochip_add: diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c index 1e4de16..5af6571 100644 --- a/drivers/gpio/gpio-sch.c +++ b/drivers/gpio/gpio-sch.c @@ -272,10 +272,8 @@ static int sch_gpio_probe(struct platform_device *pdev) return 0; err_sch_gpio_resume: - err = gpiochip_remove(&sch_gpio_core); - if (err) - dev_err(&pdev->dev, "%s failed, %d\n", - "gpiochip_remove()", err); + if (gpiochip_remove(&sch_gpio_core)) + dev_err(&pdev->dev, "%s gpiochip_remove failed\n", __func__); err_sch_gpio_core: release_region(res->start, resource_size(res)); diff --git a/drivers/gpio/gpio-viperboard.c b/drivers/gpio/gpio-viperboard.c index 095ab14..5ac2919 100644 --- a/drivers/gpio/gpio-viperboard.c +++ b/drivers/gpio/gpio-viperboard.c @@ -446,7 +446,8 @@ static int vprbrd_gpio_probe(struct platform_device *pdev) return ret; err_gpiob: - ret = gpiochip_remove(&vb_gpio->gpioa); + if (gpiochip_remove(&vb_gpio->gpioa)) + dev_err(&pdev->dev, "%s gpiochip_remove failed\n", __func__); err_gpioa: return ret; -- cgit v0.10.2 From 2a0ebf80aa95cc758d4725f74a7016e992606a39 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 19 May 2013 21:52:20 +0300 Subject: USB: cxacru: potential underflow in cxacru_cm_get_array() The value of "offd" comes off the instance->rcv_buf[] and we used it as the offset into an array. The problem is that we check the upper bound but not for negative values. Signed-off-by: Dan Carpenter Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c index b7eb86a..8a7eb77 100644 --- a/drivers/usb/atm/cxacru.c +++ b/drivers/usb/atm/cxacru.c @@ -686,7 +686,8 @@ static int cxacru_cm_get_array(struct cxacru_data *instance, enum cxacru_cm_requ { int ret, len; __le32 *buf; - int offb, offd; + int offb; + unsigned int offd; const int stride = CMD_PACKET_SIZE / (4 * 2) - 1; int buflen = ((size - 1) / stride + 1 + size * 2) * 4; -- cgit v0.10.2 From 5e427ec2d066b48a5c27b3a5a3315f7e4e729077 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 20 May 2013 11:36:03 -0700 Subject: x86: Fix bit corruption at CPU resume time MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In commit 78d77df71510 ("x86-64, init: Do not set NX bits on non-NX capable hardware") we added the early_pmd_flags that gets the NX bit set when a CPU supports NX. However, the new variable was marked __initdata, because the main _use_ of this is in an __init routine. However, the bit setting happens from secondary_startup_64(), which is called not only at bootup, but on every secondary CPU start. Including resuming from STR and at CPU hotplug time. So the value cannot be __initdata. Reported-bisected-and-tested-by: Michal Hocko Cc: stable@vger.kernel.org # v3.9 Acked-by: Peter Anvin Cc: Fernando Luis Vázquez Cao Signed-off-by: Linus Torvalds diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c index dab95a8..55b6761 100644 --- a/arch/x86/kernel/head64.c +++ b/arch/x86/kernel/head64.c @@ -34,7 +34,7 @@ extern pgd_t early_level4_pgt[PTRS_PER_PGD]; extern pmd_t early_dynamic_pgts[EARLY_DYNAMIC_PAGE_TABLES][PTRS_PER_PMD]; static unsigned int __initdata next_early_pgt = 2; -pmdval_t __initdata early_pmd_flags = __PAGE_KERNEL_LARGE & ~(_PAGE_GLOBAL | _PAGE_NX); +pmdval_t early_pmd_flags = __PAGE_KERNEL_LARGE & ~(_PAGE_GLOBAL | _PAGE_NX); /* Wipe all early page tables except for the kernel symbol map */ static void __init reset_early_page_tables(void) -- cgit v0.10.2 From dbd2df859a4d992ccbceeb22c37f6a6c4aa4dc01 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Tue, 7 May 2013 08:27:16 -0300 Subject: serial: 8250_dw: Add valid clk pointer check Commit ffc3ae6dd "serial: 8250_dw: Enable runtime PM" introduced runtime PM management, which enables/disables the clk without checking if the clk is valid. However, this driver allows to be probed without a defined clk, using clock-frequency, as a fallback. Therefore, on platforms that are device tree probed using clock-frequency instead of clk, we get an ugly NULL pointer dereference. This patch fixes it by simply adding a check before accessing the clk api. Signed-off-by: Ezequiel Garcia Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index beaa283..0b0eef9 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -338,7 +338,8 @@ static int dw8250_runtime_suspend(struct device *dev) { struct dw8250_data *data = dev_get_drvdata(dev); - clk_disable_unprepare(data->clk); + if (!IS_ERR(data->clk)) + clk_disable_unprepare(data->clk); return 0; } @@ -347,7 +348,8 @@ static int dw8250_runtime_resume(struct device *dev) { struct dw8250_data *data = dev_get_drvdata(dev); - clk_prepare_enable(data->clk); + if (!IS_ERR(data->clk)) + clk_prepare_enable(data->clk); return 0; } -- cgit v0.10.2 From 383d2fc96c1983f5cd7fca3a3b1c9b8d8ee0de66 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 20 May 2013 19:07:30 +0200 Subject: tty: nwpserial: Pass correct pointer to free_irq() free_irq() expects the same pointer that was passed to request_irq(), otherwise the IRQ is not freed. The issue was found using the following coccinelle script: @r1@ type T; T devid; @@ request_irq(..., devid) @r2@ type r1.T; T devid; position p; @@ free_irq@p(..., devid) @@ position p != r2.p; @@ *free_irq@p(...) Signed-off-by: Lars-Peter Clausen Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/nwpserial.c b/drivers/tty/serial/nwpserial.c index 77287c5..549c70a 100644 --- a/drivers/tty/serial/nwpserial.c +++ b/drivers/tty/serial/nwpserial.c @@ -199,7 +199,7 @@ static void nwpserial_shutdown(struct uart_port *port) dcr_write(up->dcr_host, UART_IER, up->ier); /* free irq */ - free_irq(up->port.irq, port); + free_irq(up->port.irq, up); } static int nwpserial_verify_port(struct uart_port *port, -- cgit v0.10.2 From f6b6f52b583003ad443d5709c56b8858466c4268 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 9 May 2013 13:50:55 +0100 Subject: serial: pl011: protect attribute read from NULL platform data struct It's completely feasible that platform data will be empty i.e. when booting with Device Tree with no device AUXDATA. So we must protect it's use in these use-cases, or risk a kernel Oops. Cc: Russell King Cc: Jiri Slaby Cc: Arnd Bergmann Signed-off-by: Lee Jones Reviewed-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 8ab70a6..e2774f9 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -332,7 +332,7 @@ static void pl011_dma_probe_initcall(struct device *dev, struct uart_amba_port * dmaengine_slave_config(chan, &rx_conf); uap->dmarx.chan = chan; - if (plat->dma_rx_poll_enable) { + if (plat && plat->dma_rx_poll_enable) { /* Set poll rate if specified. */ if (plat->dma_rx_poll_rate) { uap->dmarx.auto_poll_rate = false; -- cgit v0.10.2 From a82ea439655a66d587f353a3992521159f4050ee Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sat, 27 Apr 2013 18:14:29 +0800 Subject: serial: samsung: add missing platform_driver_unregister() when module exit We have registered platform driver when module init, and need unregister it when module exit. Signed-off-by: Wei Yongjun Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 074b919..8942941 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1803,6 +1803,7 @@ static int __init s3c24xx_serial_modinit(void) static void __exit s3c24xx_serial_modexit(void) { + platform_driver_unregister(&samsung_serial_driver); uart_unregister_driver(&s3c24xx_uart_drv); } -- cgit v0.10.2 From 9bcc3278445bedc272dc2c432e81502d00ac9182 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 25 Apr 2013 15:34:27 +0800 Subject: tty: serial: mpc5xxx: fix error handing in mpc52xx_uart_init() Add the missing uart_unregister_driver() and uninit before return from mpc52xx_uart_init() in the error handling case. Signed-off-by: Wei Yongjun Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c index 018bad9..f51b280 100644 --- a/drivers/tty/serial/mpc52xx_uart.c +++ b/drivers/tty/serial/mpc52xx_uart.c @@ -1497,18 +1497,23 @@ mpc52xx_uart_init(void) if (psc_ops && psc_ops->fifoc_init) { ret = psc_ops->fifoc_init(); if (ret) - return ret; + goto err_init; } ret = platform_driver_register(&mpc52xx_uart_of_driver); if (ret) { printk(KERN_ERR "%s: platform_driver_register failed (%i)\n", __FILE__, ret); - uart_unregister_driver(&mpc52xx_uart_driver); - return ret; + goto err_reg; } return 0; +err_reg: + if (psc_ops && psc_ops->fifoc_uninit) + psc_ops->fifoc_uninit(); +err_init: + uart_unregister_driver(&mpc52xx_uart_driver); + return ret; } static void __exit -- cgit v0.10.2 From 2b359172e013c6b1b7e424e5be92a70fc7cceaaf Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 25 Apr 2013 09:17:23 +0800 Subject: serial: mcf: missing uart_unregister_driver() on error in mcf_init() Add the missing uart_unregister_driver() before return from mcf_init() in the error handling case. Signed-off-by: Wei Yongjun Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c index e956377..65be0c0 100644 --- a/drivers/tty/serial/mcf.c +++ b/drivers/tty/serial/mcf.c @@ -707,8 +707,10 @@ static int __init mcf_init(void) if (rc) return rc; rc = platform_driver_register(&mcf_platform_driver); - if (rc) + if (rc) { + uart_unregister_driver(&mcf_driver); return rc; + } return 0; } -- cgit v0.10.2 From 416187caedf1c3b30f9bd1ffe4f4e5596fe65ae6 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 25 Apr 2013 15:36:48 +0200 Subject: TTY: rocket, fix more no-PCI warnings Commit "TTY: rocket, fix compilation warning" fixed a compilation warning, but there was still a problem with !CONFIG_PCI configs. So fix them for good by coupling the PCI functions together and moving them inside a common #ifdef. Signed-off-by: Jiri Slaby Reported-by: kbuild test robot Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c index 82d35c5..354564e 100644 --- a/drivers/tty/rocket.c +++ b/drivers/tty/rocket.c @@ -150,12 +150,14 @@ static Word_t aiop_intr_bits[AIOP_CTL_SIZE] = { AIOP_INTR_BIT_3 }; +#ifdef CONFIG_PCI static Word_t upci_aiop_intr_bits[AIOP_CTL_SIZE] = { UPCI_AIOP_INTR_BIT_0, UPCI_AIOP_INTR_BIT_1, UPCI_AIOP_INTR_BIT_2, UPCI_AIOP_INTR_BIT_3 }; +#endif static Byte_t RData[RDATASIZE] = { 0x00, 0x09, 0xf6, 0x82, @@ -227,7 +229,6 @@ static unsigned long nextLineNumber; static int __init init_ISA(int i); static void rp_wait_until_sent(struct tty_struct *tty, int timeout); static void rp_flush_buffer(struct tty_struct *tty); -static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model); static unsigned char GetLineNumber(int ctrl, int aiop, int ch); static unsigned char SetLineNumber(int ctrl, int aiop, int ch); static void rp_start(struct tty_struct *tty); @@ -241,11 +242,6 @@ static void sDisInterrupts(CHANNEL_T * ChP, Word_t Flags); static void sModemReset(CONTROLLER_T * CtlP, int chan, int on); static void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on); static int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data); -static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum, - ByteIO_t * AiopIOList, int AiopIOListSize, - WordIO_t ConfigIO, int IRQNum, Byte_t Frequency, - int PeriodicOnly, int altChanRingIndicator, - int UPCIRingInd); static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO, ByteIO_t * AiopIOList, int AiopIOListSize, int IRQNum, Byte_t Frequency, int PeriodicOnly); @@ -1775,6 +1771,145 @@ static DEFINE_PCI_DEVICE_TABLE(rocket_pci_ids) = { }; MODULE_DEVICE_TABLE(pci, rocket_pci_ids); +/* Resets the speaker controller on RocketModem II and III devices */ +static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model) +{ + ByteIO_t addr; + + /* RocketModem II speaker control is at the 8th port location of offset 0x40 */ + if ((model == MODEL_RP4M) || (model == MODEL_RP6M)) { + addr = CtlP->AiopIO[0] + 0x4F; + sOutB(addr, 0); + } + + /* RocketModem III speaker control is at the 1st port location of offset 0x80 */ + if ((model == MODEL_UPCI_RM3_8PORT) + || (model == MODEL_UPCI_RM3_4PORT)) { + addr = CtlP->AiopIO[0] + 0x88; + sOutB(addr, 0); + } +} + +/*************************************************************************** +Function: sPCIInitController +Purpose: Initialization of controller global registers and controller + structure. +Call: sPCIInitController(CtlP,CtlNum,AiopIOList,AiopIOListSize, + IRQNum,Frequency,PeriodicOnly) + CONTROLLER_T *CtlP; Ptr to controller structure + int CtlNum; Controller number + ByteIO_t *AiopIOList; List of I/O addresses for each AIOP. + This list must be in the order the AIOPs will be found on the + controller. Once an AIOP in the list is not found, it is + assumed that there are no more AIOPs on the controller. + int AiopIOListSize; Number of addresses in AiopIOList + int IRQNum; Interrupt Request number. Can be any of the following: + 0: Disable global interrupts + 3: IRQ 3 + 4: IRQ 4 + 5: IRQ 5 + 9: IRQ 9 + 10: IRQ 10 + 11: IRQ 11 + 12: IRQ 12 + 15: IRQ 15 + Byte_t Frequency: A flag identifying the frequency + of the periodic interrupt, can be any one of the following: + FREQ_DIS - periodic interrupt disabled + FREQ_137HZ - 137 Hertz + FREQ_69HZ - 69 Hertz + FREQ_34HZ - 34 Hertz + FREQ_17HZ - 17 Hertz + FREQ_9HZ - 9 Hertz + FREQ_4HZ - 4 Hertz + If IRQNum is set to 0 the Frequency parameter is + overidden, it is forced to a value of FREQ_DIS. + int PeriodicOnly: 1 if all interrupts except the periodic + interrupt are to be blocked. + 0 is both the periodic interrupt and + other channel interrupts are allowed. + If IRQNum is set to 0 the PeriodicOnly parameter is + overidden, it is forced to a value of 0. +Return: int: Number of AIOPs on the controller, or CTLID_NULL if controller + initialization failed. + +Comments: + If periodic interrupts are to be disabled but AIOP interrupts + are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0. + + If interrupts are to be completely disabled set IRQNum to 0. + + Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an + invalid combination. + + This function performs initialization of global interrupt modes, + but it does not actually enable global interrupts. To enable + and disable global interrupts use functions sEnGlobalInt() and + sDisGlobalInt(). Enabling of global interrupts is normally not + done until all other initializations are complete. + + Even if interrupts are globally enabled, they must also be + individually enabled for each channel that is to generate + interrupts. + +Warnings: No range checking on any of the parameters is done. + + No context switches are allowed while executing this function. + + After this function all AIOPs on the controller are disabled, + they can be enabled with sEnAiop(). +*/ +static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum, + ByteIO_t * AiopIOList, int AiopIOListSize, + WordIO_t ConfigIO, int IRQNum, Byte_t Frequency, + int PeriodicOnly, int altChanRingIndicator, + int UPCIRingInd) +{ + int i; + ByteIO_t io; + + CtlP->AltChanRingIndicator = altChanRingIndicator; + CtlP->UPCIRingInd = UPCIRingInd; + CtlP->CtlNum = CtlNum; + CtlP->CtlID = CTLID_0001; /* controller release 1 */ + CtlP->BusType = isPCI; /* controller release 1 */ + + if (ConfigIO) { + CtlP->isUPCI = 1; + CtlP->PCIIO = ConfigIO + _PCI_9030_INT_CTRL; + CtlP->PCIIO2 = ConfigIO + _PCI_9030_GPIO_CTRL; + CtlP->AiopIntrBits = upci_aiop_intr_bits; + } else { + CtlP->isUPCI = 0; + CtlP->PCIIO = + (WordIO_t) ((ByteIO_t) AiopIOList[0] + _PCI_INT_FUNC); + CtlP->AiopIntrBits = aiop_intr_bits; + } + + sPCIControllerEOI(CtlP); /* clear EOI if warm init */ + /* Init AIOPs */ + CtlP->NumAiop = 0; + for (i = 0; i < AiopIOListSize; i++) { + io = AiopIOList[i]; + CtlP->AiopIO[i] = (WordIO_t) io; + CtlP->AiopIntChanIO[i] = io + _INT_CHAN; + + CtlP->AiopID[i] = sReadAiopID(io); /* read AIOP ID */ + if (CtlP->AiopID[i] == AIOPID_NULL) /* if AIOP does not exist */ + break; /* done looking for AIOPs */ + + CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io); /* num channels in AIOP */ + sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE); /* clock prescaler */ + sOutB(io + _INDX_DATA, sClockPrescale); + CtlP->NumAiop++; /* bump count of AIOPs */ + } + + if (CtlP->NumAiop == 0) + return (-1); + else + return (CtlP->NumAiop); +} + /* * Called when a PCI card is found. Retrieves and stores model information, * init's aiopic and serial port hardware. @@ -2519,147 +2654,6 @@ static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO, return (CtlP->NumAiop); } -#ifdef CONFIG_PCI -/*************************************************************************** -Function: sPCIInitController -Purpose: Initialization of controller global registers and controller - structure. -Call: sPCIInitController(CtlP,CtlNum,AiopIOList,AiopIOListSize, - IRQNum,Frequency,PeriodicOnly) - CONTROLLER_T *CtlP; Ptr to controller structure - int CtlNum; Controller number - ByteIO_t *AiopIOList; List of I/O addresses for each AIOP. - This list must be in the order the AIOPs will be found on the - controller. Once an AIOP in the list is not found, it is - assumed that there are no more AIOPs on the controller. - int AiopIOListSize; Number of addresses in AiopIOList - int IRQNum; Interrupt Request number. Can be any of the following: - 0: Disable global interrupts - 3: IRQ 3 - 4: IRQ 4 - 5: IRQ 5 - 9: IRQ 9 - 10: IRQ 10 - 11: IRQ 11 - 12: IRQ 12 - 15: IRQ 15 - Byte_t Frequency: A flag identifying the frequency - of the periodic interrupt, can be any one of the following: - FREQ_DIS - periodic interrupt disabled - FREQ_137HZ - 137 Hertz - FREQ_69HZ - 69 Hertz - FREQ_34HZ - 34 Hertz - FREQ_17HZ - 17 Hertz - FREQ_9HZ - 9 Hertz - FREQ_4HZ - 4 Hertz - If IRQNum is set to 0 the Frequency parameter is - overidden, it is forced to a value of FREQ_DIS. - int PeriodicOnly: 1 if all interrupts except the periodic - interrupt are to be blocked. - 0 is both the periodic interrupt and - other channel interrupts are allowed. - If IRQNum is set to 0 the PeriodicOnly parameter is - overidden, it is forced to a value of 0. -Return: int: Number of AIOPs on the controller, or CTLID_NULL if controller - initialization failed. - -Comments: - If periodic interrupts are to be disabled but AIOP interrupts - are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0. - - If interrupts are to be completely disabled set IRQNum to 0. - - Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an - invalid combination. - - This function performs initialization of global interrupt modes, - but it does not actually enable global interrupts. To enable - and disable global interrupts use functions sEnGlobalInt() and - sDisGlobalInt(). Enabling of global interrupts is normally not - done until all other initializations are complete. - - Even if interrupts are globally enabled, they must also be - individually enabled for each channel that is to generate - interrupts. - -Warnings: No range checking on any of the parameters is done. - - No context switches are allowed while executing this function. - - After this function all AIOPs on the controller are disabled, - they can be enabled with sEnAiop(). -*/ -static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum, - ByteIO_t * AiopIOList, int AiopIOListSize, - WordIO_t ConfigIO, int IRQNum, Byte_t Frequency, - int PeriodicOnly, int altChanRingIndicator, - int UPCIRingInd) -{ - int i; - ByteIO_t io; - - CtlP->AltChanRingIndicator = altChanRingIndicator; - CtlP->UPCIRingInd = UPCIRingInd; - CtlP->CtlNum = CtlNum; - CtlP->CtlID = CTLID_0001; /* controller release 1 */ - CtlP->BusType = isPCI; /* controller release 1 */ - - if (ConfigIO) { - CtlP->isUPCI = 1; - CtlP->PCIIO = ConfigIO + _PCI_9030_INT_CTRL; - CtlP->PCIIO2 = ConfigIO + _PCI_9030_GPIO_CTRL; - CtlP->AiopIntrBits = upci_aiop_intr_bits; - } else { - CtlP->isUPCI = 0; - CtlP->PCIIO = - (WordIO_t) ((ByteIO_t) AiopIOList[0] + _PCI_INT_FUNC); - CtlP->AiopIntrBits = aiop_intr_bits; - } - - sPCIControllerEOI(CtlP); /* clear EOI if warm init */ - /* Init AIOPs */ - CtlP->NumAiop = 0; - for (i = 0; i < AiopIOListSize; i++) { - io = AiopIOList[i]; - CtlP->AiopIO[i] = (WordIO_t) io; - CtlP->AiopIntChanIO[i] = io + _INT_CHAN; - - CtlP->AiopID[i] = sReadAiopID(io); /* read AIOP ID */ - if (CtlP->AiopID[i] == AIOPID_NULL) /* if AIOP does not exist */ - break; /* done looking for AIOPs */ - - CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io); /* num channels in AIOP */ - sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE); /* clock prescaler */ - sOutB(io + _INDX_DATA, sClockPrescale); - CtlP->NumAiop++; /* bump count of AIOPs */ - } - - if (CtlP->NumAiop == 0) - return (-1); - else - return (CtlP->NumAiop); -} - -/* Resets the speaker controller on RocketModem II and III devices */ -static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model) -{ - ByteIO_t addr; - - /* RocketModem II speaker control is at the 8th port location of offset 0x40 */ - if ((model == MODEL_RP4M) || (model == MODEL_RP6M)) { - addr = CtlP->AiopIO[0] + 0x4F; - sOutB(addr, 0); - } - - /* RocketModem III speaker control is at the 1st port location of offset 0x80 */ - if ((model == MODEL_UPCI_RM3_8PORT) - || (model == MODEL_UPCI_RM3_4PORT)) { - addr = CtlP->AiopIO[0] + 0x88; - sOutB(addr, 0); - } -} -#endif - /*************************************************************************** Function: sReadAiopID Purpose: Read the AIOP idenfication number directly from an AIOP. -- cgit v0.10.2 From df957d2b9c5c8aa12f050f94c9f15236fb0e51f1 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sat, 27 Apr 2013 18:14:56 +0800 Subject: TTY: ehv_bytechan: add missing platform_driver_unregister() when module exit We have registered platform driver when module init, and need unregister it when module exit. Signed-off-by: Wei Yongjun Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c index 6d0c27c..9bffcec 100644 --- a/drivers/tty/ehv_bytechan.c +++ b/drivers/tty/ehv_bytechan.c @@ -859,6 +859,7 @@ error: */ static void __exit ehv_bc_exit(void) { + platform_driver_unregister(&ehv_bc_tty_driver); tty_unregister_driver(ehv_bc_driver); put_tty_driver(ehv_bc_driver); kfree(bcs); -- cgit v0.10.2 From 421b40a6286ee343d77d5e51f5ee6d04d7a2a90f Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Fri, 17 May 2013 12:41:03 -0400 Subject: tty/vt: Fix vc_deallocate() lock order Now that the tty port owns the flip buffers and i/o is allowed from the driver even when no tty is attached, the destruction of the tty port (and the flip buffers) must ensure that no outstanding work is pending. Unfortunately, this creates a lock order problem with the console_lock (see attached lockdep report [1] below). For single console deallocation, drop the console_lock prior to port destruction. When multiple console deallocation, defer port destruction until the consoles have been deallocated. tty_port_destroy() is not required if the port has not been used; remove from vc_allocate() failure path. [1] lockdep report from Dave Jones ====================================================== [ INFO: possible circular locking dependency detected ] 3.9.0+ #16 Not tainted ------------------------------------------------------- (agetty)/26163 is trying to acquire lock: blocked: ((&buf->work)){+.+...}, instance: ffff88011c8b0020, at: [] flush_work+0x5/0x2e0 but task is already holding lock: blocked: (console_lock){+.+.+.}, instance: ffffffff81c2fde0, at: [] vt_ioctl+0xb61/0x1230 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (console_lock){+.+.+.}: [] lock_acquire+0xa4/0x210 [] console_lock+0x77/0x80 [] con_flush_chars+0x2d/0x50 [] n_tty_receive_buf+0x122/0x14d0 [] flush_to_ldisc+0x119/0x170 [] process_one_work+0x211/0x700 [] worker_thread+0x11b/0x3a0 [] kthread+0xed/0x100 [] ret_from_fork+0x7c/0xb0 -> #0 ((&buf->work)){+.+...}: [] __lock_acquire+0x193a/0x1c00 [] lock_acquire+0xa4/0x210 [] flush_work+0x4e/0x2e0 [] __cancel_work_timer+0x95/0x130 [] cancel_work_sync+0x10/0x20 [] tty_port_destroy+0x12/0x20 [] vc_deallocate+0xf8/0x110 [] vt_ioctl+0xb6c/0x1230 [] tty_ioctl+0x285/0xd50 [] do_vfs_ioctl+0x305/0x530 [] sys_ioctl+0x81/0xa0 [] system_call_fastpath+0x16/0x1b other info that might help us debug this: [ 6760.076175] Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(console_lock); lock((&buf->work)); lock(console_lock); lock((&buf->work)); *** DEADLOCK *** 1 lock on stack by (agetty)/26163: #0: blocked: (console_lock){+.+.+.}, instance: ffffffff81c2fde0, at: [] vt_ioctl+0xb61/0x1230 stack backtrace: Pid: 26163, comm: (agetty) Not tainted 3.9.0+ #16 Call Trace: [] print_circular_bug+0x200/0x20e [] __lock_acquire+0x193a/0x1c00 [] ? sched_clock+0x9/0x10 [] ? sched_clock+0x9/0x10 [] ? native_sched_clock+0x20/0x80 [] lock_acquire+0xa4/0x210 [] ? flush_work+0x5/0x2e0 [] flush_work+0x4e/0x2e0 [] ? flush_work+0x5/0x2e0 [] ? mark_held_locks+0xbb/0x140 [] ? __free_pages_ok.part.57+0x93/0xc0 [] ? mark_held_locks+0xbb/0x140 [] ? __cancel_work_timer+0x82/0x130 [] __cancel_work_timer+0x95/0x130 [] cancel_work_sync+0x10/0x20 [] tty_port_destroy+0x12/0x20 [] vc_deallocate+0xf8/0x110 [] vt_ioctl+0xb6c/0x1230 [] ? lock_release_holdtime.part.30+0xa1/0x170 [] tty_ioctl+0x285/0xd50 [] ? inode_has_perm.isra.46.constprop.61+0x56/0x80 [] do_vfs_ioctl+0x305/0x530 [] ? selinux_file_ioctl+0x5b/0x110 [] sys_ioctl+0x81/0xa0 [] system_call_fastpath+0x16/0x1b Cc: Dave Jones Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index fbd447b..740202d 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -779,7 +779,6 @@ int vc_allocate(unsigned int currcons) /* return 0 on success */ con_set_default_unimap(vc); vc->vc_screenbuf = kmalloc(vc->vc_screenbuf_size, GFP_KERNEL); if (!vc->vc_screenbuf) { - tty_port_destroy(&vc->port); kfree(vc); vc_cons[currcons].d = NULL; return -ENOMEM; @@ -986,26 +985,25 @@ static int vt_resize(struct tty_struct *tty, struct winsize *ws) return ret; } -void vc_deallocate(unsigned int currcons) +struct vc_data *vc_deallocate(unsigned int currcons) { + struct vc_data *vc = NULL; + WARN_CONSOLE_UNLOCKED(); if (vc_cons_allocated(currcons)) { - struct vc_data *vc = vc_cons[currcons].d; - struct vt_notifier_param param = { .vc = vc }; + struct vt_notifier_param param; + param.vc = vc = vc_cons[currcons].d; atomic_notifier_call_chain(&vt_notifier_list, VT_DEALLOCATE, ¶m); vcs_remove_sysfs(currcons); vc->vc_sw->con_deinit(vc); put_pid(vc->vt_pid); module_put(vc->vc_sw->owner); kfree(vc->vc_screenbuf); - if (currcons >= MIN_NR_CONSOLES) { - tty_port_destroy(&vc->port); - kfree(vc); - } vc_cons[currcons].d = NULL; } + return vc; } /* diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index 98ff173..fc2c06c 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -283,6 +283,51 @@ do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, int perm, struct vc_ return 0; } +/* deallocate a single console, if possible (leave 0) */ +static int vt_disallocate(unsigned int vc_num) +{ + struct vc_data *vc = NULL; + int ret = 0; + + if (!vc_num) + return 0; + + console_lock(); + if (VT_BUSY(vc_num)) + ret = -EBUSY; + else + vc = vc_deallocate(vc_num); + console_unlock(); + + if (vc && vc_num >= MIN_NR_CONSOLES) { + tty_port_destroy(&vc->port); + kfree(vc); + } + + return ret; +} + +/* deallocate all unused consoles, but leave 0 */ +static void vt_disallocate_all(void) +{ + struct vc_data *vc[MAX_NR_CONSOLES]; + int i; + + console_lock(); + for (i = 1; i < MAX_NR_CONSOLES; i++) + if (!VT_BUSY(i)) + vc[i] = vc_deallocate(i); + else + vc[i] = NULL; + console_unlock(); + + for (i = 1; i < MAX_NR_CONSOLES; i++) { + if (vc[i] && i >= MIN_NR_CONSOLES) { + tty_port_destroy(&vc[i]->port); + kfree(vc[i]); + } + } +} /* @@ -769,24 +814,10 @@ int vt_ioctl(struct tty_struct *tty, ret = -ENXIO; break; } - if (arg == 0) { - /* deallocate all unused consoles, but leave 0 */ - console_lock(); - for (i=1; i Date: Thu, 9 May 2013 14:16:47 +0800 Subject: TTY: Fix tty miss restart after we turn off flow-control I meet emacs hang in start if I do the operation below: 1: echo 3 > /proc/sys/vm/drop_caches 2: emacs BigFile 3: Press CTRL-S follow 2 immediately Then emacs hang on, CTRL-Q can't resume, the terminal hang on, you can do nothing with this terminal except close it. The reason is before emacs takeover control the tty, we use CTRL-S to XOFF it. Then when emacs takeover the control, it may don't use the flow-control, so emacs hang. This patch fix it. This patch will fix a kind of strange tty relation hang problem, I believe I meet it with vim in ssh, and also see below bug report: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=465823 Signed-off-by: Wang YanQing Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index d655416..6c7fe90 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1573,6 +1573,14 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old) ldata->real_raw = 0; } n_tty_set_room(tty); + /* + * Fix tty hang when I_IXON(tty) is cleared, but the tty + * been stopped by STOP_CHAR(tty) before it. + */ + if (!I_IXON(tty) && old && (old->c_iflag & IXON) && !tty->flow_stopped) { + start_tty(tty); + } + /* The termios change make the tty ready for I/O */ wake_up_interruptible(&tty->write_wait); wake_up_interruptible(&tty->read_wait); -- cgit v0.10.2 From 25dff94ff9df40d4d663bb6ea3193a7758cc50e5 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 19 May 2013 08:36:36 +0000 Subject: isdn/kcapi: fix a small underflow In get_capi_ctr_by_nr() and get_capi_appl_by_nr() the parameter comes from skb->data. The current code can underflow to one space before the start of the array. The sanity check isn't needed in __get_capi_appl_by_nr() but I changed it to match the others. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller diff --git a/drivers/isdn/capi/kcapi.c b/drivers/isdn/capi/kcapi.c index 9b1b274..c123709 100644 --- a/drivers/isdn/capi/kcapi.c +++ b/drivers/isdn/capi/kcapi.c @@ -93,7 +93,7 @@ capi_ctr_put(struct capi_ctr *ctr) static inline struct capi_ctr *get_capi_ctr_by_nr(u16 contr) { - if (contr - 1 >= CAPI_MAXCONTR) + if (contr < 1 || contr - 1 >= CAPI_MAXCONTR) return NULL; return capi_controller[contr - 1]; @@ -103,7 +103,7 @@ static inline struct capi20_appl *__get_capi_appl_by_nr(u16 applid) { lockdep_assert_held(&capi_controller_lock); - if (applid - 1 >= CAPI_MAXAPPL) + if (applid < 1 || applid - 1 >= CAPI_MAXAPPL) return NULL; return capi_applications[applid - 1]; @@ -111,7 +111,7 @@ static inline struct capi20_appl *__get_capi_appl_by_nr(u16 applid) static inline struct capi20_appl *get_capi_appl_by_nr(u16 applid) { - if (applid - 1 >= CAPI_MAXAPPL) + if (applid < 1 || applid - 1 >= CAPI_MAXAPPL) return NULL; return rcu_dereference(capi_applications[applid - 1]); -- cgit v0.10.2 From 4d12997a9bb3d217ad4b925ec3074ec89364bf95 Mon Sep 17 00:00:00 2001 From: Petko Manolov Date: Sun, 19 May 2013 23:08:47 +0000 Subject: drivers: net: usb: rtl8150: concurrent URB bugfix This patch fixes a potential race with concurrently running asynchronous write requests. The values for device's RX control register are now stored in dynamically allocated buffers so each URB submission has it's own copy. Doing it the old way is data clobbering prone. This patch is against latest 'net' tree. Signed-off-by: Petko Manolov Signed-off-by: David S. Miller diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c index a491d3a..6cbdac6 100644 --- a/drivers/net/usb/rtl8150.c +++ b/drivers/net/usb/rtl8150.c @@ -130,19 +130,23 @@ struct rtl8150 { struct usb_device *udev; struct tasklet_struct tl; struct net_device *netdev; - struct urb *rx_urb, *tx_urb, *intr_urb, *ctrl_urb; + struct urb *rx_urb, *tx_urb, *intr_urb; struct sk_buff *tx_skb, *rx_skb; struct sk_buff *rx_skb_pool[RX_SKB_POOL_SIZE]; spinlock_t rx_pool_lock; struct usb_ctrlrequest dr; int intr_interval; - __le16 rx_creg; u8 *intr_buff; u8 phy; }; typedef struct rtl8150 rtl8150_t; +struct async_req { + struct usb_ctrlrequest dr; + u16 rx_creg; +}; + static const char driver_name [] = "rtl8150"; /* @@ -164,51 +168,47 @@ static int set_registers(rtl8150_t * dev, u16 indx, u16 size, void *data) indx, 0, data, size, 500); } -static void ctrl_callback(struct urb *urb) +static void async_set_reg_cb(struct urb *urb) { - rtl8150_t *dev; + struct async_req *req = (struct async_req *)urb->context; int status = urb->status; - switch (status) { - case 0: - break; - case -EINPROGRESS: - break; - case -ENOENT: - break; - default: - if (printk_ratelimit()) - dev_warn(&urb->dev->dev, "ctrl urb status %d\n", status); - } - dev = urb->context; - clear_bit(RX_REG_SET, &dev->flags); + if (status < 0) + dev_dbg(&urb->dev->dev, "%s failed with %d", __func__, status); + kfree(req); + usb_free_urb(urb); } -static int async_set_registers(rtl8150_t * dev, u16 indx, u16 size) +static int async_set_registers(rtl8150_t *dev, u16 indx, u16 size, u16 reg) { - int ret; - - if (test_bit(RX_REG_SET, &dev->flags)) - return -EAGAIN; + int res = -ENOMEM; + struct urb *async_urb; + struct async_req *req; - dev->dr.bRequestType = RTL8150_REQT_WRITE; - dev->dr.bRequest = RTL8150_REQ_SET_REGS; - dev->dr.wValue = cpu_to_le16(indx); - dev->dr.wIndex = 0; - dev->dr.wLength = cpu_to_le16(size); - dev->ctrl_urb->transfer_buffer_length = size; - usb_fill_control_urb(dev->ctrl_urb, dev->udev, - usb_sndctrlpipe(dev->udev, 0), (char *) &dev->dr, - &dev->rx_creg, size, ctrl_callback, dev); - if ((ret = usb_submit_urb(dev->ctrl_urb, GFP_ATOMIC))) { - if (ret == -ENODEV) + req = kmalloc(sizeof(struct async_req), GFP_ATOMIC); + if (req == NULL) + return res; + async_urb = usb_alloc_urb(0, GFP_ATOMIC); + if (async_urb == NULL) { + kfree(req); + return res; + } + req->rx_creg = cpu_to_le16(reg); + req->dr.bRequestType = RTL8150_REQT_WRITE; + req->dr.bRequest = RTL8150_REQ_SET_REGS; + req->dr.wIndex = 0; + req->dr.wValue = cpu_to_le16(indx); + req->dr.wLength = cpu_to_le16(size); + usb_fill_control_urb(async_urb, dev->udev, + usb_sndctrlpipe(dev->udev, 0), (void *)&req->dr, + &req->rx_creg, size, async_set_reg_cb, req); + res = usb_submit_urb(async_urb, GFP_ATOMIC); + if (res) { + if (res == -ENODEV) netif_device_detach(dev->netdev); - dev_err(&dev->udev->dev, - "control request submission failed: %d\n", ret); - } else - set_bit(RX_REG_SET, &dev->flags); - - return ret; + dev_err(&dev->udev->dev, "%s failed with %d\n", __func__, res); + } + return res; } static int read_mii_word(rtl8150_t * dev, u8 phy, __u8 indx, u16 * reg) @@ -330,13 +330,6 @@ static int alloc_all_urbs(rtl8150_t * dev) usb_free_urb(dev->tx_urb); return 0; } - dev->ctrl_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!dev->ctrl_urb) { - usb_free_urb(dev->rx_urb); - usb_free_urb(dev->tx_urb); - usb_free_urb(dev->intr_urb); - return 0; - } return 1; } @@ -346,7 +339,6 @@ static void free_all_urbs(rtl8150_t * dev) usb_free_urb(dev->rx_urb); usb_free_urb(dev->tx_urb); usb_free_urb(dev->intr_urb); - usb_free_urb(dev->ctrl_urb); } static void unlink_all_urbs(rtl8150_t * dev) @@ -354,7 +346,6 @@ static void unlink_all_urbs(rtl8150_t * dev) usb_kill_urb(dev->rx_urb); usb_kill_urb(dev->tx_urb); usb_kill_urb(dev->intr_urb); - usb_kill_urb(dev->ctrl_urb); } static inline struct sk_buff *pull_skb(rtl8150_t *dev) @@ -629,7 +620,6 @@ static int enable_net_traffic(rtl8150_t * dev) } /* RCR bit7=1 attach Rx info at the end; =0 HW CRC (which is broken) */ rcr = 0x9e; - dev->rx_creg = cpu_to_le16(rcr); tcr = 0xd8; cr = 0x0c; if (!(rcr & 0x80)) @@ -662,20 +652,22 @@ static void rtl8150_tx_timeout(struct net_device *netdev) static void rtl8150_set_multicast(struct net_device *netdev) { rtl8150_t *dev = netdev_priv(netdev); + u16 rx_creg = 0x9e; + netif_stop_queue(netdev); if (netdev->flags & IFF_PROMISC) { - dev->rx_creg |= cpu_to_le16(0x0001); + rx_creg |= 0x0001; dev_info(&netdev->dev, "%s: promiscuous mode\n", netdev->name); } else if (!netdev_mc_empty(netdev) || (netdev->flags & IFF_ALLMULTI)) { - dev->rx_creg &= cpu_to_le16(0xfffe); - dev->rx_creg |= cpu_to_le16(0x0002); + rx_creg &= 0xfffe; + rx_creg |= 0x0002; dev_info(&netdev->dev, "%s: allmulti set\n", netdev->name); } else { /* ~RX_MULTICAST, ~RX_PROMISCUOUS */ - dev->rx_creg &= cpu_to_le16(0x00fc); + rx_creg &= 0x00fc; } - async_set_registers(dev, RCR, 2); + async_set_registers(dev, RCR, sizeof(rx_creg), rx_creg); netif_wake_queue(netdev); } -- cgit v0.10.2 From 98962baad72fd6d393bf39dbb7c2076532c363c6 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Mon, 20 May 2013 06:54:43 +0000 Subject: 8139cp: reset BQL when ring tx ring cleared This patch cures transmit timeout's with DHCP observed while running under KVM. When the transmit ring is cleaned out, the Byte Queue Limit values need to be reset. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c index 7d1fb9a..0352345 100644 --- a/drivers/net/ethernet/realtek/8139cp.c +++ b/drivers/net/ethernet/realtek/8139cp.c @@ -1136,6 +1136,7 @@ static void cp_clean_rings (struct cp_private *cp) cp->dev->stats.tx_dropped++; } } + netdev_reset_queue(cp->dev); memset(cp->rx_ring, 0, sizeof(struct cp_desc) * CP_RX_RING_SIZE); memset(cp->tx_ring, 0, sizeof(struct cp_desc) * CP_TX_RING_SIZE); -- cgit v0.10.2 From c7788792a5e7b0d5d7f96d0766b4cb6112d47d75 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 20 May 2013 14:37:38 -0700 Subject: Linux 3.10-rc2 diff --git a/Makefile b/Makefile index cd11e88..93875f5 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 10 SUBLEVEL = 0 -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 NAME = Unicycling Gorilla # *DOCUMENTATION* -- cgit v0.10.2 From be646c2d2ba8e2e56596d72633705f8286698c25 Mon Sep 17 00:00:00 2001 From: Joern Engel Date: Wed, 15 May 2013 00:44:07 -0700 Subject: target: Remove unused wait_for_tasks bit in target_wait_for_sess_cmds Drop unused transport_wait_for_tasks() check in target_wait_for_sess_cmds shutdown code, and convert tcm_qla2xxx + ib_srpt fabric drivers. Cc: Joern Engel Cc: Roland Dreier Signed-off-by: Nicholas Bellinger diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c index b08ca7a..564024e 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -2328,7 +2328,7 @@ static void srpt_release_channel_work(struct work_struct *w) se_sess = ch->sess; BUG_ON(!se_sess); - target_wait_for_sess_cmds(se_sess, 0); + target_wait_for_sess_cmds(se_sess); transport_deregister_session_configfs(se_sess); transport_deregister_session(se_sess); diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c index d182c96..7a3870f 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c @@ -1370,7 +1370,7 @@ static void tcm_qla2xxx_free_session(struct qla_tgt_sess *sess) dump_stack(); return; } - target_wait_for_sess_cmds(se_sess, 0); + target_wait_for_sess_cmds(se_sess); transport_deregister_session_configfs(sess->se_sess); transport_deregister_session(sess->se_sess); diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 4a79336..311c113 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2263,14 +2263,10 @@ EXPORT_SYMBOL(target_sess_cmd_list_set_waiting); /* target_wait_for_sess_cmds - Wait for outstanding descriptors * @se_sess: session to wait for active I/O - * @wait_for_tasks: Make extra transport_wait_for_tasks call */ -void target_wait_for_sess_cmds( - struct se_session *se_sess, - int wait_for_tasks) +void target_wait_for_sess_cmds(struct se_session *se_sess) { struct se_cmd *se_cmd, *tmp_cmd; - bool rc = false; list_for_each_entry_safe(se_cmd, tmp_cmd, &se_sess->sess_cmd_list, se_cmd_list) { @@ -2280,24 +2276,10 @@ void target_wait_for_sess_cmds( " %d\n", se_cmd, se_cmd->t_state, se_cmd->se_tfo->get_cmd_state(se_cmd)); - if (wait_for_tasks) { - pr_debug("Calling transport_wait_for_tasks se_cmd: %p t_state: %d," - " fabric state: %d\n", se_cmd, se_cmd->t_state, - se_cmd->se_tfo->get_cmd_state(se_cmd)); - - rc = transport_wait_for_tasks(se_cmd); - - pr_debug("After transport_wait_for_tasks se_cmd: %p t_state: %d," - " fabric state: %d\n", se_cmd, se_cmd->t_state, - se_cmd->se_tfo->get_cmd_state(se_cmd)); - } - - if (!rc) { - wait_for_completion(&se_cmd->cmd_wait_comp); - pr_debug("After cmd_wait_comp: se_cmd: %p t_state: %d" - " fabric state: %d\n", se_cmd, se_cmd->t_state, - se_cmd->se_tfo->get_cmd_state(se_cmd)); - } + wait_for_completion(&se_cmd->cmd_wait_comp); + pr_debug("After cmd_wait_comp: se_cmd: %p t_state: %d" + " fabric state: %d\n", se_cmd, se_cmd->t_state, + se_cmd->se_tfo->get_cmd_state(se_cmd)); se_cmd->se_tfo->release_cmd(se_cmd); } diff --git a/include/target/target_core_fabric.h b/include/target/target_core_fabric.h index ba3471b..8a26f0d 100644 --- a/include/target/target_core_fabric.h +++ b/include/target/target_core_fabric.h @@ -123,7 +123,7 @@ int transport_send_check_condition_and_sense(struct se_cmd *, int target_get_sess_cmd(struct se_session *, struct se_cmd *, bool); int target_put_sess_cmd(struct se_session *, struct se_cmd *); void target_sess_cmd_list_set_waiting(struct se_session *); -void target_wait_for_sess_cmds(struct se_session *, int); +void target_wait_for_sess_cmds(struct se_session *); int core_alua_check_nonop_delay(struct se_cmd *); -- cgit v0.10.2 From 7e94984495dbce182260fa3dd15687439236b0a1 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 6 May 2013 15:11:10 -0600 Subject: clk: tegra: remove USB from clk init table The USB clocks are just clock gates, so no need to set a specific clock. In fact trying to set a specific clock is just a NOP if the requested clockrate is the same as those of the parent (clk_m) or will trigger a WARN_ON() if rates don't match up. As we are not setting a specific rate, nor activating the clocks at init, there is no point in keeping the the usb entries in the clock init table. Signed-off-by: Lucas Stach Acked-by: Peter De Schrijver Reviewed-by: Prashant Gaikwad Acked-by: Mike Turquette Tested-by: Stephen Warren Signed-off-by: Stephen Warren Signed-off-by: Olof Johansson diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c index 8292a00..d80c7cc 100644 --- a/drivers/clk/tegra/clk-tegra20.c +++ b/drivers/clk/tegra/clk-tegra20.c @@ -1234,9 +1234,6 @@ static __initdata struct tegra_clk_init_table init_table[] = { {uartc, pll_p, 0, 0}, {uartd, pll_p, 0, 0}, {uarte, pll_p, 0, 0}, - {usbd, clk_max, 12000000, 0}, - {usb2, clk_max, 12000000, 0}, - {usb3, clk_max, 12000000, 0}, {pll_a, clk_max, 56448000, 1}, {pll_a_out0, clk_max, 11289600, 1}, {cdev1, clk_max, 0, 1}, -- cgit v0.10.2 From 6ec3240047ee6a4b34f90d45e19ed179bc9b4a2e Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 6 May 2013 15:11:11 -0600 Subject: clk: tegra: add ac97 controller clock AC97 controller clock is hardwired to pll_a_out0. Signed-off-by: Lucas Stach Acked-by: Peter De Schrijver Reviewed-by: Prashant Gaikwad Acked-by: Mike Turquette Tested-by: Stephen Warren Signed-off-by: Stephen Warren Signed-off-by: Olof Johansson diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c index d80c7cc..075db0c 100644 --- a/drivers/clk/tegra/clk-tegra20.c +++ b/drivers/clk/tegra/clk-tegra20.c @@ -872,6 +872,14 @@ static void __init tegra20_periph_clk_init(void) struct clk *clk; int i; + /* ac97 */ + clk = tegra_clk_register_periph_gate("ac97", "pll_a_out0", + TEGRA_PERIPH_ON_APB, + clk_base, 0, 3, &periph_l_regs, + periph_clk_enb_refcnt); + clk_register_clkdev(clk, NULL, "tegra20-ac97"); + clks[ac97] = clk; + /* apbdma */ clk = tegra_clk_register_periph_gate("apbdma", "pclk", 0, clk_base, 0, 34, &periph_h_regs, -- cgit v0.10.2 From 9f8466c6e09e62a1d047f2e57d90cd42e46b35c1 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 17 May 2013 08:44:17 +0100 Subject: ARM: vt8500: Add missing NULL terminator in dt_compat When I tried booting a stih415 Dual core A9 with multi_v7_defconfig, it failed to boot. The issues seems to be changing by enabling or disabling VT8550 platform. Having a quick look at dt_compat list, it seems to miss a NULL terminator, which means of_flat_dt_match will compat check will cross the boundary of dt_compat and fault at some point , which is what was happening in my case. Without this patch if we try to boot multi_v7_defconfig you might notice that some of the platforms might fault if they fall after vt8500 in machine-desc list. Other platforms which fall before vt8500 in mdesc list will not fault. Signed-off-by: Srinivas Kandagatla Acked-by: Tony Prisk Signed-off-by: Olof Johansson diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c index 1dd281e..f5c33df 100644 --- a/arch/arm/mach-vt8500/vt8500.c +++ b/arch/arm/mach-vt8500/vt8500.c @@ -173,6 +173,7 @@ static const char * const vt8500_dt_compat[] = { "wm,wm8505", "wm,wm8750", "wm,wm8850", + NULL }; DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)") -- cgit v0.10.2 From b98da4db297bad34a5577df36ff4cb2a8fc90923 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 19 May 2013 00:47:39 +0200 Subject: ARM: nomadik: fix IRQ assignment for SMC ethernet The assignment of IRQ for the SMC91x ethernet adapter had two problems making it non-working: - It was not put into the ethernet device node. Let's do this by using the board-specific overlay, so we can make other overlays on other Nomadik boards. - The IRQ number was actually completely wrong, this was the number for NHK8815, not S8815. After this ethernet starts working on the USB S8815. Signed-off-by: Linus Walleij Signed-off-by: Olof Johansson diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts index b28fbf3..6f82d93 100644 --- a/arch/arm/boot/dts/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -14,13 +14,19 @@ bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk"; }; + /* This is where the interrupt is routed on the S8815 board */ + external-bus@34000000 { + ethernet@300 { + interrupt-parent = <&gpio3>; + interrupts = <8 0x1>; + }; + }; + /* Custom board node with GPIO pins to active etc */ usb-s8815 { /* The S8815 is using this very GPIO pin for the SMSC91x IRQs */ ethernet-gpio { - gpios = <&gpio3 19 0x1>; - interrupts = <19 0x1>; - interrupt-parent = <&gpio3>; + gpios = <&gpio3 8 0x1>; }; /* This will bias the MMC/SD card detect line */ mmcsd-gpio { -- cgit v0.10.2 From 8d9849b05154ff6f19f538c2d094ea0f32981bb0 Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Mon, 20 May 2013 13:07:19 -0600 Subject: ARM: tegra: defconfig fixes The AK8975 Kconfig option was renamed during the 3.10 merge window. Adjust tegra_defconfig to enable the new name, so it's not missing useful features. Tegra DRM support used to be enabled in the default Tegra configuration, but it now depends on CONFIG_TEGRA_HOST1X which is disabled by default. Enable CONFIG_TEGRA_HOST1X so that DRM support is compiled in again. Signed-off-by: Alexandre Courbot [swarren, squashed Alex's and my changes together] Signed-off-by: Stephen Warren Signed-off-by: Olof Johansson diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index a5f0485..f7ba3161 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -153,6 +153,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m CONFIG_DRM=y +CONFIG_TEGRA_HOST1X=y CONFIG_DRM_TEGRA=y CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set @@ -202,7 +203,7 @@ CONFIG_TEGRA20_APB_DMA=y CONFIG_STAGING=y CONFIG_SENSORS_ISL29018=y CONFIG_SENSORS_ISL29028=y -CONFIG_SENSORS_AK8975=y +CONFIG_AK8975=y CONFIG_MFD_NVEC=y CONFIG_KEYBOARD_NVEC=y CONFIG_SERIO_NVEC_PS2=y -- cgit v0.10.2 From bbb013b9200f0d860d2b353d47cc7b9f8f75fc8b Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sun, 12 May 2013 13:03:56 +0200 Subject: amd64_edac: Fix bogus sysfs file permissions Fix yet another issue caught by 8f46baaa7ec6c ("base: core: WARN() about bogus permissions on device attributes"). Signed-off-by: Borislav Petkov diff --git a/drivers/edac/amd64_edac_inj.c b/drivers/edac/amd64_edac_inj.c index 8c171fa..845f047 100644 --- a/drivers/edac/amd64_edac_inj.c +++ b/drivers/edac/amd64_edac_inj.c @@ -202,9 +202,9 @@ static DEVICE_ATTR(inject_word, S_IRUGO | S_IWUSR, amd64_inject_word_show, amd64_inject_word_store); static DEVICE_ATTR(inject_ecc_vector, S_IRUGO | S_IWUSR, amd64_inject_ecc_vector_show, amd64_inject_ecc_vector_store); -static DEVICE_ATTR(inject_write, S_IRUGO | S_IWUSR, +static DEVICE_ATTR(inject_write, S_IWUSR, NULL, amd64_inject_write_store); -static DEVICE_ATTR(inject_read, S_IRUGO | S_IWUSR, +static DEVICE_ATTR(inject_read, S_IWUSR, NULL, amd64_inject_read_store); -- cgit v0.10.2 From 7c055881de33b5d8ebb6d12150eaf338a0546199 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Sun, 12 May 2013 23:21:24 +0200 Subject: NFC: Remove commented out LLCP related Makefile line The Kconfig symbol NFC_LLCP was removed in commit 30cc458765 ("NFC: Move LLCP code to the NFC top level diirectory"). But the reference to its macro in this Makefile was only commented out. Remove it now. Signed-off-by: Paul Bolle Signed-off-by: Samuel Ortiz diff --git a/net/nfc/Makefile b/net/nfc/Makefile index fb799de..a76f453 100644 --- a/net/nfc/Makefile +++ b/net/nfc/Makefile @@ -5,7 +5,6 @@ obj-$(CONFIG_NFC) += nfc.o obj-$(CONFIG_NFC_NCI) += nci/ obj-$(CONFIG_NFC_HCI) += hci/ -#obj-$(CONFIG_NFC_LLCP) += llcp/ nfc-objs := core.o netlink.o af_nfc.o rawsock.o llcp_core.o llcp_commands.o \ llcp_sock.o -- cgit v0.10.2 From d999e4db0ac409c582cb15e6b120241ed9105064 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 30 Apr 2013 23:22:34 +0200 Subject: NFC: mei_phy depends on INTEL_MEI INTEL_MEI_BUS_NFC never made it upstream, so make it depend on INTEL_MEI. Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/Kconfig b/drivers/nfc/Kconfig index 4775d4e..74a852e 100644 --- a/drivers/nfc/Kconfig +++ b/drivers/nfc/Kconfig @@ -28,7 +28,7 @@ config NFC_WILINK config NFC_MEI_PHY tristate "MEI bus NFC device support" - depends on INTEL_MEI_BUS_NFC && NFC_HCI + depends on INTEL_MEI && NFC_HCI help This adds support to use an mei bus nfc device. Select this if you will use an HCI NFC driver for an NFC chip connected behind an -- cgit v0.10.2 From 73f3adb9b91efac04e4e7f8379a85400fc57121e Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 30 Apr 2013 23:48:50 +0200 Subject: NFC: mei_phy: Register event callback when enabling the device The callback registration starts a waiting read, so it needs to be fired everytime the device is enabled. Otherwise following writes will never get an answer back. Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/mei_phy.c b/drivers/nfc/mei_phy.c index b8f8abc..1201bdb 100644 --- a/drivers/nfc/mei_phy.c +++ b/drivers/nfc/mei_phy.c @@ -64,6 +64,15 @@ int nfc_mei_phy_enable(void *phy_id) return r; } + r = mei_cl_register_event_cb(phy->device, nfc_mei_event_cb, phy); + if (r) { + pr_err("MEY_PHY: Event cb registration failed\n"); + mei_cl_disable_device(phy->device); + phy->powered = 0; + + return r; + } + phy->powered = 1; return 0; diff --git a/drivers/nfc/microread/mei.c b/drivers/nfc/microread/mei.c index 1ad044d..51d44fb 100644 --- a/drivers/nfc/microread/mei.c +++ b/drivers/nfc/microread/mei.c @@ -43,24 +43,16 @@ static int microread_mei_probe(struct mei_cl_device *device, return -ENOMEM; } - r = mei_cl_register_event_cb(device, nfc_mei_event_cb, phy); - if (r) { - pr_err(MICROREAD_DRIVER_NAME ": event cb registration failed\n"); - goto err_out; - } - r = microread_probe(phy, &mei_phy_ops, LLC_NOP_NAME, MEI_NFC_HEADER_SIZE, 0, MEI_NFC_MAX_HCI_PAYLOAD, &phy->hdev); - if (r < 0) - goto err_out; - - return 0; + if (r < 0) { + nfc_mei_phy_free(phy); -err_out: - nfc_mei_phy_free(phy); + return r; + } - return r; + return 0; } static int microread_mei_remove(struct mei_cl_device *device) diff --git a/drivers/nfc/pn544/mei.c b/drivers/nfc/pn544/mei.c index 1eb4884..50cef3a 100644 --- a/drivers/nfc/pn544/mei.c +++ b/drivers/nfc/pn544/mei.c @@ -43,24 +43,16 @@ static int pn544_mei_probe(struct mei_cl_device *device, return -ENOMEM; } - r = mei_cl_register_event_cb(device, nfc_mei_event_cb, phy); - if (r) { - pr_err(PN544_DRIVER_NAME ": event cb registration failed\n"); - goto err_out; - } - r = pn544_hci_probe(phy, &mei_phy_ops, LLC_NOP_NAME, MEI_NFC_HEADER_SIZE, 0, MEI_NFC_MAX_HCI_PAYLOAD, &phy->hdev); - if (r < 0) - goto err_out; - - return 0; + if (r < 0) { + nfc_mei_phy_free(phy); -err_out: - nfc_mei_phy_free(phy); + return r; + } - return r; + return 0; } static int pn544_mei_remove(struct mei_cl_device *device) -- cgit v0.10.2 From e3a6b14ceda0207c3405c6266e5177a85c0db044 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 30 Apr 2013 23:50:29 +0200 Subject: NFC: mei: Do not disable MEI devices from their remove routine Enabling and disabling device is exclusively handled by the mei_phy_ops. Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/microread/mei.c b/drivers/nfc/microread/mei.c index 51d44fb..cdf1bc5 100644 --- a/drivers/nfc/microread/mei.c +++ b/drivers/nfc/microread/mei.c @@ -63,8 +63,6 @@ static int microread_mei_remove(struct mei_cl_device *device) microread_remove(phy->hdev); - nfc_mei_phy_disable(phy); - nfc_mei_phy_free(phy); return 0; diff --git a/drivers/nfc/pn544/mei.c b/drivers/nfc/pn544/mei.c index 50cef3a..b5d3d18 100644 --- a/drivers/nfc/pn544/mei.c +++ b/drivers/nfc/pn544/mei.c @@ -63,8 +63,6 @@ static int pn544_mei_remove(struct mei_cl_device *device) pn544_hci_remove(phy->hdev); - nfc_mei_phy_disable(phy); - nfc_mei_phy_free(phy); return 0; -- cgit v0.10.2 From 1c98b4871cca4b7ce07e19f92f934d47cf7210b0 Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Mon, 13 May 2013 18:12:25 -0300 Subject: drm/i915: Adding more reserved PCI IDs for Haswell. At DDX commit Chris mentioned the tendency we have of finding out more PCI IDs only when users report. So Let's add all new reserved Haswell IDs. This patch also fix GT3 names. I'no not sending in separated patche because names are only in few comments and not in variable names. v2: Fix some mobile ids (by Paulo) References: http://bugs.freedesktop.org/show_bug.cgi?id=63701 Cc: Chris Wilson Cc: Paulo Zanoni Signed-off-by: Rodrigo Vivi Cc: stable@vger.kernel.org Reviewed-by: Paulo Zanoni Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 9ebe895..a2e4953 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -364,40 +364,64 @@ static const struct pci_device_id pciidlist[] = { /* aka */ INTEL_VGA_DEVICE(0x016a, &intel_ivybridge_d_info), /* GT2 server */ INTEL_VGA_DEVICE(0x0402, &intel_haswell_d_info), /* GT1 desktop */ INTEL_VGA_DEVICE(0x0412, &intel_haswell_d_info), /* GT2 desktop */ - INTEL_VGA_DEVICE(0x0422, &intel_haswell_d_info), /* GT2 desktop */ + INTEL_VGA_DEVICE(0x0422, &intel_haswell_d_info), /* GT3 desktop */ INTEL_VGA_DEVICE(0x040a, &intel_haswell_d_info), /* GT1 server */ INTEL_VGA_DEVICE(0x041a, &intel_haswell_d_info), /* GT2 server */ - INTEL_VGA_DEVICE(0x042a, &intel_haswell_d_info), /* GT2 server */ + INTEL_VGA_DEVICE(0x042a, &intel_haswell_d_info), /* GT3 server */ INTEL_VGA_DEVICE(0x0406, &intel_haswell_m_info), /* GT1 mobile */ INTEL_VGA_DEVICE(0x0416, &intel_haswell_m_info), /* GT2 mobile */ INTEL_VGA_DEVICE(0x0426, &intel_haswell_m_info), /* GT2 mobile */ + INTEL_VGA_DEVICE(0x040B, &intel_haswell_d_info), /* GT1 reserved */ + INTEL_VGA_DEVICE(0x041B, &intel_haswell_d_info), /* GT2 reserved */ + INTEL_VGA_DEVICE(0x042B, &intel_haswell_d_info), /* GT3 reserved */ + INTEL_VGA_DEVICE(0x040E, &intel_haswell_d_info), /* GT1 reserved */ + INTEL_VGA_DEVICE(0x041E, &intel_haswell_d_info), /* GT2 reserved */ + INTEL_VGA_DEVICE(0x042E, &intel_haswell_d_info), /* GT3 reserved */ INTEL_VGA_DEVICE(0x0C02, &intel_haswell_d_info), /* SDV GT1 desktop */ INTEL_VGA_DEVICE(0x0C12, &intel_haswell_d_info), /* SDV GT2 desktop */ - INTEL_VGA_DEVICE(0x0C22, &intel_haswell_d_info), /* SDV GT2 desktop */ + INTEL_VGA_DEVICE(0x0C22, &intel_haswell_d_info), /* SDV GT3 desktop */ INTEL_VGA_DEVICE(0x0C0A, &intel_haswell_d_info), /* SDV GT1 server */ INTEL_VGA_DEVICE(0x0C1A, &intel_haswell_d_info), /* SDV GT2 server */ - INTEL_VGA_DEVICE(0x0C2A, &intel_haswell_d_info), /* SDV GT2 server */ + INTEL_VGA_DEVICE(0x0C2A, &intel_haswell_d_info), /* SDV GT3 server */ INTEL_VGA_DEVICE(0x0C06, &intel_haswell_m_info), /* SDV GT1 mobile */ INTEL_VGA_DEVICE(0x0C16, &intel_haswell_m_info), /* SDV GT2 mobile */ - INTEL_VGA_DEVICE(0x0C26, &intel_haswell_m_info), /* SDV GT2 mobile */ + INTEL_VGA_DEVICE(0x0C26, &intel_haswell_m_info), /* SDV GT3 mobile */ + INTEL_VGA_DEVICE(0x0C0B, &intel_haswell_d_info), /* SDV GT1 reserved */ + INTEL_VGA_DEVICE(0x0C1B, &intel_haswell_d_info), /* SDV GT2 reserved */ + INTEL_VGA_DEVICE(0x0C2B, &intel_haswell_d_info), /* SDV GT3 reserved */ + INTEL_VGA_DEVICE(0x0C0E, &intel_haswell_d_info), /* SDV GT1 reserved */ + INTEL_VGA_DEVICE(0x0C1E, &intel_haswell_d_info), /* SDV GT2 reserved */ + INTEL_VGA_DEVICE(0x0C2E, &intel_haswell_d_info), /* SDV GT3 reserved */ INTEL_VGA_DEVICE(0x0A02, &intel_haswell_d_info), /* ULT GT1 desktop */ INTEL_VGA_DEVICE(0x0A12, &intel_haswell_d_info), /* ULT GT2 desktop */ - INTEL_VGA_DEVICE(0x0A22, &intel_haswell_d_info), /* ULT GT2 desktop */ + INTEL_VGA_DEVICE(0x0A22, &intel_haswell_d_info), /* ULT GT3 desktop */ INTEL_VGA_DEVICE(0x0A0A, &intel_haswell_d_info), /* ULT GT1 server */ INTEL_VGA_DEVICE(0x0A1A, &intel_haswell_d_info), /* ULT GT2 server */ - INTEL_VGA_DEVICE(0x0A2A, &intel_haswell_d_info), /* ULT GT2 server */ + INTEL_VGA_DEVICE(0x0A2A, &intel_haswell_d_info), /* ULT GT3 server */ INTEL_VGA_DEVICE(0x0A06, &intel_haswell_m_info), /* ULT GT1 mobile */ INTEL_VGA_DEVICE(0x0A16, &intel_haswell_m_info), /* ULT GT2 mobile */ - INTEL_VGA_DEVICE(0x0A26, &intel_haswell_m_info), /* ULT GT2 mobile */ + INTEL_VGA_DEVICE(0x0A26, &intel_haswell_m_info), /* ULT GT3 mobile */ + INTEL_VGA_DEVICE(0x0A0B, &intel_haswell_d_info), /* ULT GT1 reserved */ + INTEL_VGA_DEVICE(0x0A1B, &intel_haswell_d_info), /* ULT GT2 reserved */ + INTEL_VGA_DEVICE(0x0A2B, &intel_haswell_d_info), /* ULT GT3 reserved */ + INTEL_VGA_DEVICE(0x0A0E, &intel_haswell_m_info), /* ULT GT1 reserved */ + INTEL_VGA_DEVICE(0x0A1E, &intel_haswell_m_info), /* ULT GT2 reserved */ + INTEL_VGA_DEVICE(0x0A2E, &intel_haswell_m_info), /* ULT GT3 reserved */ INTEL_VGA_DEVICE(0x0D02, &intel_haswell_d_info), /* CRW GT1 desktop */ INTEL_VGA_DEVICE(0x0D12, &intel_haswell_d_info), /* CRW GT2 desktop */ - INTEL_VGA_DEVICE(0x0D22, &intel_haswell_d_info), /* CRW GT2 desktop */ + INTEL_VGA_DEVICE(0x0D22, &intel_haswell_d_info), /* CRW GT3 desktop */ INTEL_VGA_DEVICE(0x0D0A, &intel_haswell_d_info), /* CRW GT1 server */ INTEL_VGA_DEVICE(0x0D1A, &intel_haswell_d_info), /* CRW GT2 server */ - INTEL_VGA_DEVICE(0x0D2A, &intel_haswell_d_info), /* CRW GT2 server */ + INTEL_VGA_DEVICE(0x0D2A, &intel_haswell_d_info), /* CRW GT3 server */ INTEL_VGA_DEVICE(0x0D06, &intel_haswell_m_info), /* CRW GT1 mobile */ INTEL_VGA_DEVICE(0x0D16, &intel_haswell_m_info), /* CRW GT2 mobile */ - INTEL_VGA_DEVICE(0x0D26, &intel_haswell_m_info), /* CRW GT2 mobile */ + INTEL_VGA_DEVICE(0x0D26, &intel_haswell_m_info), /* CRW GT3 mobile */ + INTEL_VGA_DEVICE(0x0D0B, &intel_haswell_d_info), /* CRW GT1 reserved */ + INTEL_VGA_DEVICE(0x0D1B, &intel_haswell_d_info), /* CRW GT2 reserved */ + INTEL_VGA_DEVICE(0x0D2B, &intel_haswell_d_info), /* CRW GT3 reserved */ + INTEL_VGA_DEVICE(0x0D0E, &intel_haswell_d_info), /* CRW GT1 reserved */ + INTEL_VGA_DEVICE(0x0D1E, &intel_haswell_d_info), /* CRW GT2 reserved */ + INTEL_VGA_DEVICE(0x0D2E, &intel_haswell_d_info), /* CRW GT3 reserved */ INTEL_VGA_DEVICE(0x0f30, &intel_valleyview_m_info), INTEL_VGA_DEVICE(0x0f31, &intel_valleyview_m_info), INTEL_VGA_DEVICE(0x0f32, &intel_valleyview_m_info), -- cgit v0.10.2 From 2d05eae1c92f93ace0fc6f282c55527d293297dd Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 3 May 2013 17:36:25 +0100 Subject: drm/i915: Propagate errors back from fb set-base Along the modesetting short cut where we skip trying to do a full modeset and instead simply update the framebuffer base registers, we failed to handle any errors reported. This regression has been introduced in commit 94352cf9a5328bb1a44288e6c2c1276695f8a356 Author: Daniel Vetter Date: Thu Jul 5 22:51:56 2012 +0200 drm/i915: push crtc->fb update into pipe_set_base Signed-off-by: Chris Wilson Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index efe8299..300942a 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8332,11 +8332,6 @@ static int intel_crtc_set_config(struct drm_mode_set *set) ret = intel_set_mode(set->crtc, set->mode, set->x, set->y, set->fb); - if (ret) { - DRM_ERROR("failed to set mode on [CRTC:%d], err = %d\n", - set->crtc->base.id, ret); - goto fail; - } } else if (config->fb_changed) { intel_crtc_wait_for_pending_flips(set->crtc); @@ -8344,18 +8339,18 @@ static int intel_crtc_set_config(struct drm_mode_set *set) set->x, set->y, set->fb); } - intel_set_config_free(config); - - return 0; - + if (ret) { + DRM_ERROR("failed to set mode on [CRTC:%d], err = %d\n", + set->crtc->base.id, ret); fail: - intel_set_config_restore_state(dev, config); + intel_set_config_restore_state(dev, config); - /* Try to restore the config */ - if (config->mode_changed && - intel_set_mode(save_set.crtc, save_set.mode, - save_set.x, save_set.y, save_set.fb)) - DRM_ERROR("failed to restore config after modeset failure\n"); + /* Try to restore the config */ + if (config->mode_changed && + intel_set_mode(save_set.crtc, save_set.mode, + save_set.x, save_set.y, save_set.fb)) + DRM_ERROR("failed to restore config after modeset failure\n"); + } out_config: intel_set_config_free(config); -- cgit v0.10.2 From bdea0d222a21f864a811cf6666532334e622f7c6 Mon Sep 17 00:00:00 2001 From: "Lad, Prabhakar" Date: Tue, 7 May 2013 01:07:25 -0300 Subject: [media] media: davinci: vpbe: fix layer availability for NV12 format For NV12 format, even if display data is single image, both VIDWIN0 and VIDWIN1 parameters must be used. The start address of Y data plane and C data plane is configured in VIDEOWIN0ADH/L and VIDEOWIN1ADH/L respectively. cuurently only one layer was requested, which is suffice for yuv422, but for yuv420(NV12) two layers are required and fix the same by requesting for other layer if pix fmt is NV12 during set_fmt. Signed-off-by: Lad, Prabhakar Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/davinci/vpbe_display.c b/drivers/media/platform/davinci/vpbe_display.c index 1802f11..d0b375c 100644 --- a/drivers/media/platform/davinci/vpbe_display.c +++ b/drivers/media/platform/davinci/vpbe_display.c @@ -916,6 +916,21 @@ static int vpbe_display_s_fmt(struct file *file, void *priv, other video window */ layer->pix_fmt = *pixfmt; + if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12) { + struct vpbe_layer *otherlayer; + + otherlayer = _vpbe_display_get_other_win_layer(disp_dev, layer); + /* if other layer is available, only + * claim it, do not configure it + */ + ret = osd_device->ops.request_layer(osd_device, + otherlayer->layer_info.id); + if (ret < 0) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Display Manager failed to allocate layer\n"); + return -EBUSY; + } + } /* Get osd layer config */ osd_device->ops.get_layer_config(osd_device, -- cgit v0.10.2 From 39e219d9292958460c3229df29995454414ce626 Mon Sep 17 00:00:00 2001 From: "Lad, Prabhakar" Date: Fri, 10 May 2013 00:48:38 -0300 Subject: [media] davinci: vpfe: fix error path in probe The error path on failure was calling mutex_unlock(), but there was no actuall call before for mutex_lock(). This patch fixes this issue by pointing it to proper go label. Reported-by: Jose Pablo Carballo Signed-off-by: Lad, Prabhakar Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/davinci/vpfe_capture.c b/drivers/media/platform/davinci/vpfe_capture.c index 8c50d30..3827fe1 100644 --- a/drivers/media/platform/davinci/vpfe_capture.c +++ b/drivers/media/platform/davinci/vpfe_capture.c @@ -1837,7 +1837,7 @@ static int vpfe_probe(struct platform_device *pdev) if (NULL == ccdc_cfg) { v4l2_err(pdev->dev.driver, "Memory allocation failed for ccdc_cfg\n"); - goto probe_free_lock; + goto probe_free_dev_mem; } mutex_lock(&ccdc_lock); -- cgit v0.10.2 From 96f83b3f270aff148a1fa55f9a464e1bbadeadd4 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 7 May 2013 07:51:21 -0300 Subject: [media] davinci: vpfe: fix error return code in vpfe_probe() Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Acked-by: Lad, Prabhakar Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/staging/media/davinci_vpfe/vpfe_mc_capture.c b/drivers/staging/media/davinci_vpfe/vpfe_mc_capture.c index b88e1dd..d8ce20d 100644 --- a/drivers/staging/media/davinci_vpfe/vpfe_mc_capture.c +++ b/drivers/staging/media/davinci_vpfe/vpfe_mc_capture.c @@ -639,7 +639,8 @@ static int vpfe_probe(struct platform_device *pdev) if (ret) goto probe_free_dev_mem; - if (vpfe_initialize_modules(vpfe_dev, pdev)) + ret = vpfe_initialize_modules(vpfe_dev, pdev); + if (ret) goto probe_disable_clock; vpfe_dev->media_dev.dev = vpfe_dev->pdev; @@ -663,7 +664,8 @@ static int vpfe_probe(struct platform_device *pdev) /* set the driver data in platform device */ platform_set_drvdata(pdev, vpfe_dev); /* register subdevs/entities */ - if (vpfe_register_entities(vpfe_dev)) + ret = vpfe_register_entities(vpfe_dev); + if (ret) goto probe_out_v4l2_unregister; ret = vpfe_attach_irq(vpfe_dev); -- cgit v0.10.2 From ab6717886b6af7c1408602948653c63408c46f5e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 8 May 2013 16:23:41 -0300 Subject: [media] v4l2: SI476X MFD - Do not use binary constants Gcc < 4.3 doesn't understand binary constanrs (0b*): drivers/media/radio/radio-si476x.c:862:20: error: invalid suffix "b10000000" on integer constant Hence use a hexadecimal constant (0x*) instead. Signed-off-by: Geert Uytterhoeven Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/radio/radio-si476x.c b/drivers/media/radio/radio-si476x.c index 9430c6a..9dc8baf 100644 --- a/drivers/media/radio/radio-si476x.c +++ b/drivers/media/radio/radio-si476x.c @@ -44,7 +44,7 @@ #define FREQ_MUL (10000000 / 625) -#define SI476X_PHDIV_STATUS_LINK_LOCKED(status) (0b10000000 & (status)) +#define SI476X_PHDIV_STATUS_LINK_LOCKED(status) (0x80 & (status)) #define DRIVER_NAME "si476x-radio" #define DRIVER_CARD "SI476x AM/FM Receiver" -- cgit v0.10.2 From ea457ad9dbf32c8d22cc1cc39b4c1a2e06bf9b89 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 2 May 2013 11:16:26 -0300 Subject: [media] radio-si476x: depend on SND_SOC It is not possible to select SND_SOC_SI476X if we have not also enabled SND_SOC. warning: (RADIO_SI476X) selects SND_SOC_SI476X which has unmet direct dependencies (SOUND && !M68K && !UML && SND && SND_SOC) Signed-off-by: Arnd Bergmann [hans.verkuil@cisco.com: fixed wrong driver name in subject] Acked-by: Mauro Carvalho Chehab Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index c0beee2..d529ba7 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -22,6 +22,7 @@ config RADIO_SI476X tristate "Silicon Laboratories Si476x I2C FM Radio" depends on I2C && VIDEO_V4L2 depends on MFD_SI476X_CORE + depends on SND_SOC select SND_SOC_SI476X ---help--- Choose Y here if you have this FM radio chip. -- cgit v0.10.2 From 6e7df1cd373d688486b0b0b6626cb32f59ebdcfa Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 7 May 2013 08:06:11 -0300 Subject: [media] DocBook: media: update codec section, drop obsolete 'suspended' state The Codec section in the V4L2 specification was marked as 'suspended', even though codec support has been around for quite some time. Update this section, explaining a bit about memory-to-memory devices and pointing to the MPEG controls section. Signed-off-by: Hans Verkuil Acked-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/DocBook/media/v4l/dev-codec.xml b/Documentation/DocBook/media/v4l/dev-codec.xml index dca0ecd..ff44c16 100644 --- a/Documentation/DocBook/media/v4l/dev-codec.xml +++ b/Documentation/DocBook/media/v4l/dev-codec.xml @@ -1,18 +1,27 @@ Codec Interface - - Suspended + A V4L2 codec can compress, decompress, transform, or otherwise +convert video data from one format into another format, in memory. Typically +such devices are memory-to-memory devices (i.e. devices with the +V4L2_CAP_VIDEO_M2M or V4L2_CAP_VIDEO_M2M_MPLANE +capability set). + - This interface has been be suspended from the V4L2 API -implemented in Linux 2.6 until we have more experience with codec -device interfaces. - + A memory-to-memory video node acts just like a normal video node, but it +supports both output (sending frames from memory to the codec hardware) and +capture (receiving the processed frames from the codec hardware into memory) +stream I/O. An application will have to setup the stream +I/O for both sides and finally call &VIDIOC-STREAMON; for both capture and output +to start the codec. - A V4L2 codec can compress, decompress, transform, or otherwise -convert video data from one format into another format, in memory. -Applications send data to be converted to the driver through a -&func-write; call, and receive the converted data through a -&func-read; call. For efficiency a driver may also support streaming -I/O. + Video compression codecs use the MPEG controls to setup their codec parameters +(note that the MPEG controls actually support many more codecs than just MPEG). +See . - [to do] + Memory-to-memory devices can often be used as a shared resource: you can +open the video node multiple times, each application setting up their own codec properties +that are local to the file handle, and each can use it independently from the others. +The driver will arbitrate access to the codec and reprogram it whenever another file +handler gets access. This is different from the usual video node behavior where the video properties +are global to the device (i.e. changing something through one file handle is visible +through another file handle). -- cgit v0.10.2 From a2ac2d792cb6a22eb86ef4e026ba74c3ea6e67ee Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 10 May 2013 07:53:08 -0300 Subject: [media] vpfe-capture.c: remove unused label probe_free_lock Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/davinci/vpfe_capture.c b/drivers/media/platform/davinci/vpfe_capture.c index 3827fe1..9360909 100644 --- a/drivers/media/platform/davinci/vpfe_capture.c +++ b/drivers/media/platform/davinci/vpfe_capture.c @@ -1991,7 +1991,6 @@ probe_out_release_irq: free_irq(vpfe_dev->ccdc_irq0, vpfe_dev); probe_free_ccdc_cfg_mem: kfree(ccdc_cfg); -probe_free_lock: mutex_unlock(&ccdc_lock); probe_free_dev_mem: kfree(vpfe_dev); -- cgit v0.10.2 From 2031941502339d548cd51bf34e6ebb8bc3bb2d89 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 26 Apr 2013 04:52:57 -0300 Subject: [media] exynos4-is: Fix potential null pointer dereference in mipi-csis.c When 'node' is NULL, the print statement tries to dereference it. Hence replace the variable with the one that is accessible. Signed-off-by: Sachin Kamat Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c b/drivers/media/platform/exynos4-is/mipi-csis.c index a2eda9d..254d70f 100644 --- a/drivers/media/platform/exynos4-is/mipi-csis.c +++ b/drivers/media/platform/exynos4-is/mipi-csis.c @@ -746,7 +746,7 @@ static int s5pcsis_parse_dt(struct platform_device *pdev, node = v4l2_of_get_next_endpoint(node, NULL); if (!node) { dev_err(&pdev->dev, "No port node at %s\n", - node->full_name); + pdev->dev.of_node->full_name); return -EINVAL; } /* Get port node and validate MIPI-CSI channel id. */ -- cgit v0.10.2 From 8410725333088643f49371396e727cc1e41ccfb5 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 30 Apr 2013 02:16:19 -0300 Subject: [media] s3c-camif: Fix incorrect variable type 'rotation' was an 8 bit variable and hence could not have values greater than 255. Since we need higher values, change it to 16 bit type. Signed-off-by: Sachin Kamat Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/s3c-camif/camif-core.h b/drivers/media/platform/s3c-camif/camif-core.h index 261134b..35d2fcd 100644 --- a/drivers/media/platform/s3c-camif/camif-core.h +++ b/drivers/media/platform/s3c-camif/camif-core.h @@ -229,7 +229,7 @@ struct camif_vp { unsigned int state; u16 fmt_flags; u8 id; - u8 rotation; + u16 rotation; u8 hflip; u8 vflip; unsigned int offset; -- cgit v0.10.2 From c6f89116c14144c18295d2a06294788c86fe9e6d Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 30 Apr 2013 00:42:16 -0300 Subject: [media] s5c73m3: Fix off-by-one valid range checking for fie->index Current code uses fie->index as array subscript, thus the valid value range is 0 ... ARRAY_SIZE(s5c73m3_intervals) - 1. Signed-off-by: Axel Lin Acked-by: Andrzej Hajda Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/i2c/s5c73m3/s5c73m3-core.c b/drivers/media/i2c/s5c73m3/s5c73m3-core.c index cb52438..9eac531 100644 --- a/drivers/media/i2c/s5c73m3/s5c73m3-core.c +++ b/drivers/media/i2c/s5c73m3/s5c73m3-core.c @@ -956,7 +956,7 @@ static int s5c73m3_oif_enum_frame_interval(struct v4l2_subdev *sd, if (fie->pad != OIF_SOURCE_PAD) return -EINVAL; - if (fie->index > ARRAY_SIZE(s5c73m3_intervals)) + if (fie->index >= ARRAY_SIZE(s5c73m3_intervals)) return -EINVAL; mutex_lock(&state->lock); -- cgit v0.10.2 From 7accedd2fa059961629fd47212dd7096370c64fb Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 30 Apr 2013 10:18:23 -0300 Subject: [media] exynos4-is: Fix off-by-one valid range checking for is->config_index Current code uses is->config_index as array subscript, thus the valid value range is 0 ... ARRAY_SIZE(cmd) - 1. Signed-off-by: Axel Lin Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/exynos4-is/fimc-is-regs.c b/drivers/media/platform/exynos4-is/fimc-is-regs.c index b0ff67b..d05eaa2 100644 --- a/drivers/media/platform/exynos4-is/fimc-is-regs.c +++ b/drivers/media/platform/exynos4-is/fimc-is-regs.c @@ -174,7 +174,7 @@ int fimc_is_hw_change_mode(struct fimc_is *is) HIC_CAPTURE_STILL, HIC_CAPTURE_VIDEO, }; - if (WARN_ON(is->config_index > ARRAY_SIZE(cmd))) + if (WARN_ON(is->config_index >= ARRAY_SIZE(cmd))) return -EINVAL; mcuctl_write(cmd[is->config_index], is, MCUCTL_REG_ISSR(0)); -- cgit v0.10.2 From c79b069d72f54ff0589e7615160420553aa4f04e Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Thu, 9 May 2013 08:43:34 -0300 Subject: [media] exynos4-is: Correct fimc-lite compatible property description Ensure the compatible property for FIMC-LITE IP blocks is properly documented, a cut&paste error fix. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt b/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt index 3f62adf..de9f6b7 100644 --- a/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt +++ b/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt @@ -2,7 +2,7 @@ Exynos4x12/Exynos5 SoC series camera host interface (FIMC-LITE) Required properties: -- compatible : should be "samsung,exynos4212-fimc" for Exynos4212 and +- compatible : should be "samsung,exynos4212-fimc-lite" for Exynos4212 and Exynos4412 SoCs; - reg : physical base address and size of the device memory mapped registers; -- cgit v0.10.2 From ce0d10f887cabf9f16d1cbb60ef013021befbfdf Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Tue, 21 May 2013 15:04:07 +0100 Subject: regulator: core: Correct spelling mistake in comment Signed-off-by: Charles Keepax Signed-off-by: Mark Brown diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 6e50178..5e50b20 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2702,7 +2702,7 @@ EXPORT_SYMBOL_GPL(regulator_get_voltage); /** * regulator_set_current_limit - set regulator output current limit * @regulator: regulator source - * @min_uA: Minimuum supported current in uA + * @min_uA: Minimum supported current in uA * @max_uA: Maximum supported current in uA * * Sets current sink to the desired output current. This can be set during -- cgit v0.10.2 From aa033810461ee56abbef6cef10aabd6b97f5caee Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 20 May 2013 17:57:16 -0700 Subject: ARM: smp: Drop RCU_NONIDLE usage in cpu_die() Before f7b861b7a6d9 ("arm: Use generic idle loop") ARM would kill the CPU within the rcu idle section. Now that the rcu_idle_enter()/exit() pair have been pushed lower down in the idle loop this is no longer true and so using RCU_NONIDLE here is no longer necessary and also harmful because RCU is not actually idle at this point. Cc: Russell King Acked-by: Paul E. McKenney Signed-off-by: Stephen Boyd Signed-off-by: Linus Torvalds diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 47ab905..550d63c 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -251,7 +251,7 @@ void __ref cpu_die(void) * this returns, power and/or clocks can be removed at any point * from this CPU and its cache by platform_cpu_kill(). */ - RCU_NONIDLE(complete(&cpu_died)); + complete(&cpu_died); /* * Ensure that the cache lines associated with that completion are -- cgit v0.10.2 From 1c04fc3536b9e6d143991a8c5c16b04866baeed6 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 10 May 2013 09:14:04 -0700 Subject: driver core: export subsys_virtual_register Modules want to call this function, so it needs to be exported. Reported-by: Daniel Mack Cc: Kay Sievers Cc: Tejun Heo Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/base/bus.c b/drivers/base/bus.c index 1a68f94..d414331 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -1295,6 +1295,7 @@ int subsys_virtual_register(struct bus_type *subsys, return subsys_register(subsys, groups, virtual_dir); } +EXPORT_SYMBOL_GPL(subsys_virtual_register); int __init buses_init(void) { -- cgit v0.10.2 From 97521978c5ea80857d4f4f74d4e1fc93721482cf Mon Sep 17 00:00:00 2001 From: "dyoung@redhat.com" Date: Thu, 16 May 2013 14:31:30 +0800 Subject: driver core: print sysfs attribute name when warning about bogus permissions Make it obvious to see what attribute is using bogus permissions. Signed-off-by: Dave Young Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/base/core.c b/drivers/base/core.c index 016312437..2499cef 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -572,9 +572,11 @@ int device_create_file(struct device *dev, if (dev) { WARN(((attr->attr.mode & S_IWUGO) && !attr->store), - "Write permission without 'store'\n"); + "Attribute %s: write permission without 'store'\n", + attr->attr.name); WARN(((attr->attr.mode & S_IRUGO) && !attr->show), - "Read permission without 'show'\n"); + "Attribute %s: read permission without 'show'\n", + attr->attr.name); error = sysfs_create_file(&dev->kobj, &attr->attr); } -- cgit v0.10.2 From 46e0cd87d90056383c8b5408fb297f18c1bdddf3 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Tue, 7 May 2013 21:12:31 +0300 Subject: mei: fix out of array access to me clients array The patch 9f81abdac362: "mei: implement mei_cl_connect function" from Jan 8, 2013, leads to the following static checker warning: "drivers/misc/mei/main.c:522 mei_ioctl_connect_client() warn: check 'dev->me_clients[]' for negative offsets (-2)" Reported-by: Dan Carpenter Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c index 7c44c8d..053139f 100644 --- a/drivers/misc/mei/main.c +++ b/drivers/misc/mei/main.c @@ -489,11 +489,16 @@ static int mei_ioctl_connect_client(struct file *file, /* find ME client we're trying to connect to */ i = mei_me_cl_by_uuid(dev, &data->in_client_uuid); - if (i >= 0 && !dev->me_clients[i].props.fixed_address) { - cl->me_client_id = dev->me_clients[i].client_id; - cl->state = MEI_FILE_CONNECTING; + if (i < 0 || dev->me_clients[i].props.fixed_address) { + dev_dbg(&dev->pdev->dev, "Cannot connect to FW Client UUID = %pUl\n", + &data->in_client_uuid); + rets = -ENODEV; + goto end; } + cl->me_client_id = dev->me_clients[i].client_id; + cl->state = MEI_FILE_CONNECTING; + dev_dbg(&dev->pdev->dev, "Connect to FW Client ID = %d\n", cl->me_client_id); dev_dbg(&dev->pdev->dev, "FW Client - Protocol Version = %d\n", @@ -527,11 +532,6 @@ static int mei_ioctl_connect_client(struct file *file, goto end; } - if (cl->state != MEI_FILE_CONNECTING) { - rets = -ENODEV; - goto end; - } - /* prepare the output buffer */ client = &data->out_client_properties; @@ -543,7 +543,6 @@ static int mei_ioctl_connect_client(struct file *file, rets = mei_cl_connect(cl, file); end: - dev_dbg(&dev->pdev->dev, "free connect cb memory."); return rets; } -- cgit v0.10.2 From d2242a384355773c711a936522bcfae0f35f8c2a Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Fri, 17 May 2013 09:30:35 -0700 Subject: Drivers: hv: Fix a bug in get_vp_index() Linux' notion of cpuid is different from the Host's notion of CPUID. In the call to bind the channel interrupts, we should use the host's notion of CPU Ids. Fix this bug. Signed-off-by: K. Y. Srinivasan Cc: Stable (V3.9) Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c index bad8128..21ef689 100644 --- a/drivers/hv/channel_mgmt.c +++ b/drivers/hv/channel_mgmt.c @@ -329,7 +329,7 @@ static u32 get_vp_index(uuid_le *type_guid) return 0; } cur_cpu = (++next_vp % max_cpus); - return cur_cpu; + return hv_context.vp_index[cur_cpu]; } /* -- cgit v0.10.2 From bbedf2fc207bbd89c109123caee7cf0497030762 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 21 May 2013 18:52:09 +0200 Subject: mei: bus: Reset event_cb when disabling a device After cancelling all reads from the disable hook, we need to reset the event_cb pointer as well or else we won't be able to set a new one up when re-enabling the device. Acked-by: Tomas Winkler Signed-off-by: Samuel Ortiz Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c index 1e935ea..9ecd49a 100644 --- a/drivers/misc/mei/bus.c +++ b/drivers/misc/mei/bus.c @@ -496,6 +496,8 @@ int mei_cl_disable_device(struct mei_cl_device *device) } } + device->event_cb = NULL; + mutex_unlock(&dev->device_lock); if (!device->ops || !device->ops->disable) -- cgit v0.10.2 From a4162747b79683b163d54cfd9c9319d9a8bad111 Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Thu, 9 May 2013 14:34:55 -0700 Subject: MAINTAINERS: update Hyper-V file list Signed-off-by: Haiyang Zhang Reviewed-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman diff --git a/MAINTAINERS b/MAINTAINERS index 3d7782b..8f190f5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3865,9 +3865,16 @@ M: K. Y. Srinivasan M: Haiyang Zhang L: devel@linuxdriverproject.org S: Maintained -F: drivers/hv/ +F: arch/x86/include/asm/mshyperv.h +F: arch/x86/include/uapi/asm/hyperv.h +F: arch/x86/kernel/cpu/mshyperv.c F: drivers/hid/hid-hyperv.c +F: drivers/hv/ F: drivers/net/hyperv/ +F: drivers/scsi/storvsc_drv.c +F: drivers/video/hyperv_fb.c +F: include/linux/hyperv.h +F: tools/hv/ I2C OVER PARALLEL PORT M: Jean Delvare -- cgit v0.10.2 From 89fb9e7c3423662f4969a1e8ef0f5d44835d2381 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 9 May 2013 23:04:51 +0200 Subject: uio: UIO_DMEM_GENIRQ should depend on HAS_DMA If NO_DMA=y: drivers/built-in.o: In function `uio_dmem_genirq_release': drivers/uio/uio_dmem_genirq.c:95: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `uio_dmem_genirq_open': drivers/uio/uio_dmem_genirq.c:61: undefined reference to `dma_alloc_coherent' Signed-off-by: Geert Uytterhoeven Cc: Hans J. Koch Cc: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig index e92eeaf..5295be0 100644 --- a/drivers/uio/Kconfig +++ b/drivers/uio/Kconfig @@ -45,6 +45,7 @@ config UIO_PDRV_GENIRQ config UIO_DMEM_GENIRQ tristate "Userspace platform driver with generic irq and dynamic memory" + depends on HAS_DMA help Platform driver for Userspace I/O devices, including generic interrupt handling code. Shared interrupts are not supported. -- cgit v0.10.2 From b5325a02aa84c794cf520d6d68cae4b150988a32 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Fri, 10 May 2013 15:40:13 -0700 Subject: ttyprintk: Fix NULL pointer deref by setting tty_port ops after initializing port tty_port_init() zeroes out the tty port, which means that we have to set the ops pointer /after/, not before this call. Otherwise, tty_port_open will crash when it tries to deref ops, which is now a NULL pointer. Signed-off-by: Darrick J. Wong Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c index 4945bd3..d5d2e4a 100644 --- a/drivers/char/ttyprintk.c +++ b/drivers/char/ttyprintk.c @@ -179,7 +179,6 @@ static int __init ttyprintk_init(void) { int ret = -ENOMEM; - tpk_port.port.ops = &null_ops; mutex_init(&tpk_port.port_write_mutex); ttyprintk_driver = tty_alloc_driver(1, @@ -190,6 +189,7 @@ static int __init ttyprintk_init(void) return PTR_ERR(ttyprintk_driver); tty_port_init(&tpk_port.port); + tpk_port.port.ops = &null_ops; ttyprintk_driver->driver_name = "ttyprintk"; ttyprintk_driver->name = "ttyprintk"; -- cgit v0.10.2 From ac5a2962b02f57dea76d314ef2521a2170b28ab6 Mon Sep 17 00:00:00 2001 From: "wang, biao" Date: Thu, 16 May 2013 09:50:13 +0800 Subject: klist: del waiter from klist_remove_waiters before wakeup waitting process There is a race between klist_remove and klist_release. klist_remove uses a local var waiter saved on stack. When klist_release calls wake_up_process(waiter->process) to wake up the waiter, waiter might run immediately and reuse the stack. Then, klist_release calls list_del(&waiter->list) to change previous wait data and cause prior waiter thread corrupt. The patch fixes it against kernel 3.9. Signed-off-by: wang, biao Acked-by: Peter Zijlstra Signed-off-by: Greg Kroah-Hartman diff --git a/lib/klist.c b/lib/klist.c index 0874e41..358a368 100644 --- a/lib/klist.c +++ b/lib/klist.c @@ -193,10 +193,10 @@ static void klist_release(struct kref *kref) if (waiter->node != n) continue; + list_del(&waiter->list); waiter->woken = 1; mb(); wake_up_process(waiter->process); - list_del(&waiter->list); } spin_unlock(&klist_remove_lock); knode_set_klist(n, NULL); -- cgit v0.10.2 From 9d83e1807e6462ac5c4edb7eae96c69594e8c8ef Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Tue, 21 May 2013 09:34:24 +0300 Subject: serial: 8250_dw: add ACPI ID for Intel BayTrail This is the same controller as on Intel Lynxpoint but the ACPI ID is different. Signed-off-by: Heikki Krogerus Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 0b0eef9..d07b6af 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -369,6 +369,7 @@ MODULE_DEVICE_TABLE(of, dw8250_of_match); static const struct acpi_device_id dw8250_acpi_match[] = { { "INT33C4", 0 }, { "INT33C5", 0 }, + { "80860F0A", 0 }, { }, }; MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match); -- cgit v0.10.2 From dfc7b837c7f9f01f76511aa3eeea35232903e58f Mon Sep 17 00:00:00 2001 From: "Matwey V. Kornilov" Date: Tue, 21 May 2013 13:57:37 +0400 Subject: tty: mxser: fix usage of opmode_ioaddr mxser_port->opmode_ioaddr is initialized only for MOXA_MUST_MU860_HWID chips, but no precautions have been undertaken to prevent reading and writing to undefined port number. Signed-off-by: Matwey V. Kornilov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c index 71d6eb2..f97b196 100644 --- a/drivers/tty/mxser.c +++ b/drivers/tty/mxser.c @@ -1618,8 +1618,12 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp) if (ip->type == PORT_16550A) me->fifo[p] = 1; - opmode = inb(ip->opmode_ioaddr)>>((p % 4) * 2); - opmode &= OP_MODE_MASK; + if (ip->board->chip_flag == MOXA_MUST_MU860_HWID) { + opmode = inb(ip->opmode_ioaddr)>>((p % 4) * 2); + opmode &= OP_MODE_MASK; + } else { + opmode = RS232_MODE; + } me->iftype[p] = opmode; mutex_unlock(&port->mutex); } @@ -1670,6 +1674,9 @@ static int mxser_ioctl(struct tty_struct *tty, return mxser_ioctl_special(cmd, argp); if (cmd == MOXA_SET_OP_MODE || cmd == MOXA_GET_OP_MODE) { + if (info->board->chip_flag != MOXA_MUST_MU860_HWID) + return -EFAULT; + int p; unsigned long opmode; static unsigned char ModeMask[] = { 0xfc, 0xf3, 0xcf, 0x3f }; -- cgit v0.10.2 From 8c24d6ea12879a4880c5f9a514dd4c3b6575094a Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 24 Apr 2013 20:43:59 +0200 Subject: staging: video: imx: Select VIDEOMODE_HELPERS for parallel display Without this, I get the following problem when building kernel: drivers/built-in.o: In function `imx_pd_connector_get_modes': /linux-2.6/drivers/staging/imx-drm/parallel-display.c:78: undefined reference to `of_get_drm_display_mode' make: *** [vmlinux] Error 1 Signed-off-by: Marek Vasut Cc: Sascha Hauer Cc: Philipp Zabel Cc: Fabio Estevam Acked-by: Sascha Hauer Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/imx-drm/Kconfig b/drivers/staging/imx-drm/Kconfig index 35ccda5..ef699f7 100644 --- a/drivers/staging/imx-drm/Kconfig +++ b/drivers/staging/imx-drm/Kconfig @@ -20,6 +20,7 @@ config DRM_IMX_FB_HELPER config DRM_IMX_PARALLEL_DISPLAY tristate "Support for parallel displays" depends on DRM_IMX + select VIDEOMODE_HELPERS config DRM_IMX_TVE tristate "Support for TV and VGA displays" -- cgit v0.10.2 From c7b0cf3e712775e8e2015c2f4582864159540be6 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 21 May 2013 11:24:44 -0300 Subject: staging: imx-drm: imx-tve: Check the return value of 'regulator_enable()' Since commit c8801a8 (regulator: core: Mark all get and enable calls as __must_check) we need to check the value returned by 'regulator_enable()'. Do this check to get rid of the following build warning: drivers/staging/imx-drm/imx-tve.c: In function 'imx_tve_probe': drivers/staging/imx-drm/imx-tve.c:671:19: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] Signed-off-by: Fabio Estevam Acked-by: Shawn Guo Acked-by: Sascha Hauer Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/imx-drm/imx-tve.c b/drivers/staging/imx-drm/imx-tve.c index ac16344..03892de 100644 --- a/drivers/staging/imx-drm/imx-tve.c +++ b/drivers/staging/imx-drm/imx-tve.c @@ -670,7 +670,9 @@ static int imx_tve_probe(struct platform_device *pdev) tve->dac_reg = devm_regulator_get(&pdev->dev, "dac"); if (!IS_ERR(tve->dac_reg)) { regulator_set_voltage(tve->dac_reg, 2750000, 2750000); - regulator_enable(tve->dac_reg); + ret = regulator_enable(tve->dac_reg); + if (ret) + return ret; } tve->clk = devm_clk_get(&pdev->dev, "tve"); -- cgit v0.10.2 From 796718925159523919a589ecbd6d1811c22ef55f Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 16 May 2013 15:25:01 +0200 Subject: ASoC: davinci: fix sample rotation McASP serial audio engine needs different rotation values on TX and RX channels. Commit dde109fb462 ("ASoC: McASP: Fix data rotation for playback. Enables 24bit audio playback") changed the calculation to fix the playback format, but broke the capture stream by doing it for both TXFMT and RXFMT. Signed-off-by: Daniel Mack Signed-off-by: Mark Brown Cc: stable@vger.kernel.org [3.9 only] diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c index 56ecfc7..81490fe 100644 --- a/sound/soc/davinci/davinci-mcasp.c +++ b/sound/soc/davinci/davinci-mcasp.c @@ -631,7 +631,8 @@ static int davinci_config_channel_size(struct davinci_audio_dev *dev, int word_length) { u32 fmt; - u32 rotate = (word_length / 4) & 0x7; + u32 tx_rotate = (word_length / 4) & 0x7; + u32 rx_rotate = (32 - word_length) / 4; u32 mask = (1ULL << word_length) - 1; /* @@ -655,9 +656,9 @@ static int davinci_config_channel_size(struct davinci_audio_dev *dev, mcasp_mod_bits(dev->base + DAVINCI_MCASP_TXFMT_REG, TXSSZ(fmt), TXSSZ(0x0F)); mcasp_mod_bits(dev->base + DAVINCI_MCASP_TXFMT_REG, - TXROT(rotate), TXROT(7)); + TXROT(tx_rotate), TXROT(7)); mcasp_mod_bits(dev->base + DAVINCI_MCASP_RXFMT_REG, - RXROT(rotate), RXROT(7)); + RXROT(rx_rotate), RXROT(7)); mcasp_set_reg(dev->base + DAVINCI_MCASP_RXMASK_REG, mask); } -- cgit v0.10.2 From 803d19d57a042e86e9e9b685bbc3f4a0a751040f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Timo=20Ter=C3=A4s?= Date: Fri, 17 May 2013 00:48:39 -0700 Subject: leds: leds-gpio: reserve gpio before using it MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit a99d76f (leds: leds-gpio: use gpio_request_one) and commit 2d7c22f (leds: leds-gpio: set devm_gpio_request_one() flags param correctly) which was a fix of the first one. The conversion to devm_gpio_request in commit e3b1d44c (leds: leds-gpio: use devm_gpio_request_one) is not reverted. The problem is that gpio_cansleep() and gpio_get_value_cansleep() calls can crash if the gpio is not first reserved. Incidentally this same bug existed earlier and was fixed similarly in commit d95cbe61 (leds: Fix potential leds-gpio oops). But the OOPS is real. It happens when GPIOs are provided by module which is not yet loaded. So this fixes the following BUG during my ALIX boot (3.9.2-vanilla): BUG: unable to handle kernel NULL pointer dereference at 0000004c IP: [] __gpio_cansleep+0xe/0x1a *pde = 00000000 Oops: 0000 [#1] SMP Modules linked in: leds_gpio(+) via_rhine mii cs5535_mfd mfd_core geode_rng rng_core geode_aes isofs nls_utf8 nls_cp437 vfat fat ata_generic pata_amd pata_cs5536 pata_acpi libata ehci_pci ehci_hcd ohci_hcd usb_storage usbcore usb_common sd_mod scsi_mod squashfs loop Pid: 881, comm: modprobe Not tainted 3.9.2 #1-Alpine EIP: 0060:[] EFLAGS: 00010282 CPU: 0 EIP is at __gpio_cansleep+0xe/0x1a EAX: 00000000 EBX: cf364018 ECX: c132b8b9 EDX: 00000000 ESI: c13993a4 EDI: c1399370 EBP: cded9dbc ESP: cded9dbc DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 8005003b CR2: 0000004c CR3: 0f0c4000 CR4: 00000090 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Process modprobe (pid: 881, ti=cded8000 task=cf094aa0 task.ti=cded8000) Stack: cded9de0 d09471cb 00000000 c1399260 cf364014 00000000 c1399260 c1399254 d0949014 cded9df4 c118cd59 c1399260 d0949014 d0949014 cded9e08 c118ba47 c1399260 d0949014 c1399294 cded9e1c c118bb75 cded9e24 d0949014 00000000 Call Trace: [] gpio_led_probe+0xba/0x203 [leds_gpio] [] platform_drv_probe+0x26/0x48 [] driver_probe_device+0x75/0x15c [] __driver_attach+0x47/0x63 [] bus_for_each_dev+0x3c/0x66 [] driver_attach+0x14/0x16 [] ? driver_probe_device+0x15c/0x15c [] bus_add_driver+0xbd/0x1bc [] ? 0xd08b3fff [] ? 0xd08b3fff [] driver_register+0x74/0xec [] ? 0xd08b3fff [] platform_driver_register+0x38/0x3a [] gpio_led_driver_init+0xd/0x1000 [leds_gpio] [] do_one_initcall+0x6b/0x10f [] ? 0xd08b3fff [] load_module+0x1631/0x1907 [] ? insert_vmalloc_vmlist+0x14/0x43 [] ? __vmalloc_node_range+0x13e/0x15f [] sys_init_module+0x62/0x77 [] syscall_call+0x7/0xb EIP: [] __gpio_cansleep+0xe/0x1a SS:ESP 0068:cded9dbc CR2: 000000000000004c ---[ end trace 5308fb20d2514822 ]--- Signed-off-by: Timo Teräs Cc: Sachin Kamat Cc: Raphael Assenat Cc: Trent Piepho Cc: Javier Martinez Canillas Cc: Arnaud Patard Cc: Ezequiel Garcia Acked-by: Jingoo Han Signed-off-by: Bryan Wu diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c index a0d931b..b02b679 100644 --- a/drivers/leds/leds-gpio.c +++ b/drivers/leds/leds-gpio.c @@ -107,6 +107,10 @@ static int create_gpio_led(const struct gpio_led *template, return 0; } + ret = devm_gpio_request(parent, template->gpio, template->name); + if (ret < 0) + return ret; + led_dat->cdev.name = template->name; led_dat->cdev.default_trigger = template->default_trigger; led_dat->gpio = template->gpio; @@ -126,10 +130,7 @@ static int create_gpio_led(const struct gpio_led *template, if (!template->retain_state_suspended) led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; - ret = devm_gpio_request_one(parent, template->gpio, - (led_dat->active_low ^ state) ? - GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW, - template->name); + ret = gpio_direction_output(led_dat->gpio, led_dat->active_low ^ state); if (ret < 0) return ret; -- cgit v0.10.2 From e4f2dfbb5e92be4e46c0625f4f8eb101110f756f Mon Sep 17 00:00:00 2001 From: Mikael Pettersson Date: Fri, 8 Mar 2013 15:03:53 +0100 Subject: m68k: implement futex.h to support userspace robust futexes and PI mutexes Linux/M68K currently doesn't support robust futexes or PI mutexes. The problem is that the futex code needs to perform certain ops (cmpxchg, set, add, or, andn, xor) atomically on user-space addresses, and M68K's lack of a futex.h causes those operations to be unsupported and disabled. This patch adds that support, but only for uniprocessor machines, which is adequate for M68K. For UP it's enough to disable preemption to ensure mutual exclusion (futexes don't need to care about other hardware agents), and the mandatory pagefault_disable() does just that. This patch is closely based on the one I co-wrote for UP ARM back in August 2008. The main change is that this patch uses the C get_user/put_user accessors instead of inline assembly code with exception table fixups. For non-MMU machines the new futex.h simply redirects to the generic futex.h, so there is no functional change for them. Tested on aranym with the glibc-2.17 test suite: no regressions, and a number of mutex/condvar test cases went from failing to succeeding (tst-mutexpi{5,5a,6,9}, tst-cond2[45], tst-robust[1-9], tst-robustpi[1-8]). Also tested with glibc-2.18 HEAD and a local glibc patch to enable PI mutexes: no regressions. Signed-off-by: Mikael Pettersson Acked-by: Andreas Schwab [geert: Added removal of ""generic-y += futex.h"] Signed-off-by: Geert Uytterhoeven diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild index c7933e4..09d77a8 100644 --- a/arch/m68k/include/asm/Kbuild +++ b/arch/m68k/include/asm/Kbuild @@ -6,7 +6,6 @@ generic-y += device.h generic-y += emergency-restart.h generic-y += errno.h generic-y += exec.h -generic-y += futex.h generic-y += hw_irq.h generic-y += ioctl.h generic-y += ipcbuf.h diff --git a/arch/m68k/include/asm/futex.h b/arch/m68k/include/asm/futex.h new file mode 100644 index 0000000..bc868af --- /dev/null +++ b/arch/m68k/include/asm/futex.h @@ -0,0 +1,94 @@ +#ifndef _ASM_M68K_FUTEX_H +#define _ASM_M68K_FUTEX_H + +#ifdef __KERNEL__ +#if !defined(CONFIG_MMU) +#include +#else /* CONFIG_MMU */ + +#include +#include +#include + +static inline int +futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, + u32 oldval, u32 newval) +{ + u32 val; + + if (unlikely(get_user(val, uaddr) != 0)) + return -EFAULT; + + if (val == oldval && unlikely(put_user(newval, uaddr) != 0)) + return -EFAULT; + + *uval = val; + + return 0; +} + +static inline int +futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr) +{ + int op = (encoded_op >> 28) & 7; + int cmp = (encoded_op >> 24) & 15; + int oparg = (encoded_op << 8) >> 20; + int cmparg = (encoded_op << 20) >> 20; + int oldval, ret; + u32 tmp; + + if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) + oparg = 1 << oparg; + + pagefault_disable(); /* implies preempt_disable() */ + + ret = -EFAULT; + if (unlikely(get_user(oldval, uaddr) != 0)) + goto out_pagefault_enable; + + ret = 0; + tmp = oldval; + + switch (op) { + case FUTEX_OP_SET: + tmp = oparg; + break; + case FUTEX_OP_ADD: + tmp += oparg; + break; + case FUTEX_OP_OR: + tmp |= oparg; + break; + case FUTEX_OP_ANDN: + tmp &= ~oparg; + break; + case FUTEX_OP_XOR: + tmp ^= oparg; + break; + default: + ret = -ENOSYS; + } + + if (ret == 0 && unlikely(put_user(tmp, uaddr) != 0)) + ret = -EFAULT; + +out_pagefault_enable: + pagefault_enable(); /* subsumes preempt_enable() */ + + if (ret == 0) { + switch (cmp) { + case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; + case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; + case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; + case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; + case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; + case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; + default: ret = -ENOSYS; + } + } + return ret; +} + +#endif /* CONFIG_MMU */ +#endif /* __KERNEL__ */ +#endif /* _ASM_M68K_FUTEX_H */ -- cgit v0.10.2 From f69ae770e74df420fbcf93aae81b30a5dcc73b7d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Martin=20Hundeb=C3=B8ll?= Date: Wed, 17 Apr 2013 21:13:16 +0200 Subject: batman-adv: Avoid double freeing of bat_counters MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On errors in batadv_mesh_init(), bat_counters will be freed in both batadv_mesh_free() and batadv_softif_init_late(). This patch fixes this by returning earlier from batadv_softif_init_late() in case of errors in batadv_mesh_init() and by setting bat_counters to NULL after freeing. Signed-off-by: Martin Hundebøll Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli diff --git a/net/batman-adv/main.c b/net/batman-adv/main.c index 1240f07..51aafd6 100644 --- a/net/batman-adv/main.c +++ b/net/batman-adv/main.c @@ -181,6 +181,7 @@ void batadv_mesh_free(struct net_device *soft_iface) batadv_originator_free(bat_priv); free_percpu(bat_priv->bat_counters); + bat_priv->bat_counters = NULL; atomic_set(&bat_priv->mesh_state, BATADV_MESH_INACTIVE); } diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c index 6f20d33..819dfb0 100644 --- a/net/batman-adv/soft-interface.c +++ b/net/batman-adv/soft-interface.c @@ -505,6 +505,7 @@ unreg_debugfs: batadv_debugfs_del_meshif(dev); free_bat_counters: free_percpu(bat_priv->bat_counters); + bat_priv->bat_counters = NULL; return ret; } -- cgit v0.10.2 From 5649d8f9e335f2b093751fcc2bdd5953f79f66ef Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Fri, 26 Apr 2013 14:17:18 +0200 Subject: mfd: ab8500-sysctrl: Let sysctrl driver work without pdata A check for a valid plat->sysctrl was introduced in: 2377e52 mfd: ab8500-sysctrl: Error check clean up but the driver works just fine even without that initialization data, and enforcing it breaks existing platforms for no reason. This patch removes the check and let the driver go ahead with probe. Acked-by: Linus Walleij Signed-off-by: Fabio Baltieri Signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c index 0c20361..8e0dae5 100644 --- a/drivers/mfd/ab8500-sysctrl.c +++ b/drivers/mfd/ab8500-sysctrl.c @@ -104,7 +104,7 @@ void ab8500_restart(char mode, const char *cmd) plat = dev_get_platdata(sysctrl_dev->parent); pdata = plat->sysctrl; - if (pdata->reboot_reason_code) + if (pdata && pdata->reboot_reason_code) reason = pdata->reboot_reason_code(cmd); else pr_warn("[%s] No reboot reason set. Default reason %d\n", @@ -188,7 +188,7 @@ static int ab8500_sysctrl_probe(struct platform_device *pdev) plat = dev_get_platdata(pdev->dev.parent); - if (!(plat && plat->sysctrl)) + if (!plat) return -EINVAL; sysctrl_dev = &pdev->dev; @@ -197,7 +197,6 @@ static int ab8500_sysctrl_probe(struct platform_device *pdev) pm_power_off = ab8500_power_off; pdata = plat->sysctrl; - if (pdata) { int last, ret, i, j; -- cgit v0.10.2 From ec4602a9588a196fa1a9af46bfdd37cbf5792db4 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 16 May 2013 22:29:28 +0200 Subject: ACPI / PM: Allow device power states to be used for CONFIG_PM unset Currently, drivers/acpi/device_pm.c depends on CONFIG_PM and all of the functions defined in there are replaced with static inline stubs if that option is unset. However, CONFIG_PM means, roughly, "runtime PM or suspend/hibernation support" and some of those functions are useful regardless of that. For example, they are used by the ACPI fan driver for controlling fans and acpi_device_set_power() is called during device removal. Moreover, device initialization may depend on setting device power states properly. For these reasons, make the routines manipulating ACPI device power states defined in drivers/acpi/device_pm.c available for CONFIG_PM unset too. Reported-by: Zhang Rui Reported-and-tested-by: Michel Lespinasse Signed-off-by: Rafael J. Wysocki Cc: 3.9+ diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index ecb743b..7cad994 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -24,7 +24,7 @@ acpi-y += nvs.o # Power management related files acpi-y += wakeup.o acpi-y += sleep.o -acpi-$(CONFIG_PM) += device_pm.o +acpi-y += device_pm.o acpi-$(CONFIG_ACPI_SLEEP) += proc.o diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c index 96de787..bc493aa 100644 --- a/drivers/acpi/device_pm.c +++ b/drivers/acpi/device_pm.c @@ -37,68 +37,6 @@ #define _COMPONENT ACPI_POWER_COMPONENT ACPI_MODULE_NAME("device_pm"); -static DEFINE_MUTEX(acpi_pm_notifier_lock); - -/** - * acpi_add_pm_notifier - Register PM notifier for given ACPI device. - * @adev: ACPI device to add the notifier for. - * @context: Context information to pass to the notifier routine. - * - * NOTE: @adev need not be a run-wake or wakeup device to be a valid source of - * PM wakeup events. For example, wakeup events may be generated for bridges - * if one of the devices below the bridge is signaling wakeup, even if the - * bridge itself doesn't have a wakeup GPE associated with it. - */ -acpi_status acpi_add_pm_notifier(struct acpi_device *adev, - acpi_notify_handler handler, void *context) -{ - acpi_status status = AE_ALREADY_EXISTS; - - mutex_lock(&acpi_pm_notifier_lock); - - if (adev->wakeup.flags.notifier_present) - goto out; - - status = acpi_install_notify_handler(adev->handle, - ACPI_SYSTEM_NOTIFY, - handler, context); - if (ACPI_FAILURE(status)) - goto out; - - adev->wakeup.flags.notifier_present = true; - - out: - mutex_unlock(&acpi_pm_notifier_lock); - return status; -} - -/** - * acpi_remove_pm_notifier - Unregister PM notifier from given ACPI device. - * @adev: ACPI device to remove the notifier from. - */ -acpi_status acpi_remove_pm_notifier(struct acpi_device *adev, - acpi_notify_handler handler) -{ - acpi_status status = AE_BAD_PARAMETER; - - mutex_lock(&acpi_pm_notifier_lock); - - if (!adev->wakeup.flags.notifier_present) - goto out; - - status = acpi_remove_notify_handler(adev->handle, - ACPI_SYSTEM_NOTIFY, - handler); - if (ACPI_FAILURE(status)) - goto out; - - adev->wakeup.flags.notifier_present = false; - - out: - mutex_unlock(&acpi_pm_notifier_lock); - return status; -} - /** * acpi_power_state_string - String representation of ACPI device power state. * @state: ACPI device power state to return the string representation of. @@ -385,6 +323,69 @@ bool acpi_bus_power_manageable(acpi_handle handle) } EXPORT_SYMBOL(acpi_bus_power_manageable); +#ifdef CONFIG_PM +static DEFINE_MUTEX(acpi_pm_notifier_lock); + +/** + * acpi_add_pm_notifier - Register PM notifier for given ACPI device. + * @adev: ACPI device to add the notifier for. + * @context: Context information to pass to the notifier routine. + * + * NOTE: @adev need not be a run-wake or wakeup device to be a valid source of + * PM wakeup events. For example, wakeup events may be generated for bridges + * if one of the devices below the bridge is signaling wakeup, even if the + * bridge itself doesn't have a wakeup GPE associated with it. + */ +acpi_status acpi_add_pm_notifier(struct acpi_device *adev, + acpi_notify_handler handler, void *context) +{ + acpi_status status = AE_ALREADY_EXISTS; + + mutex_lock(&acpi_pm_notifier_lock); + + if (adev->wakeup.flags.notifier_present) + goto out; + + status = acpi_install_notify_handler(adev->handle, + ACPI_SYSTEM_NOTIFY, + handler, context); + if (ACPI_FAILURE(status)) + goto out; + + adev->wakeup.flags.notifier_present = true; + + out: + mutex_unlock(&acpi_pm_notifier_lock); + return status; +} + +/** + * acpi_remove_pm_notifier - Unregister PM notifier from given ACPI device. + * @adev: ACPI device to remove the notifier from. + */ +acpi_status acpi_remove_pm_notifier(struct acpi_device *adev, + acpi_notify_handler handler) +{ + acpi_status status = AE_BAD_PARAMETER; + + mutex_lock(&acpi_pm_notifier_lock); + + if (!adev->wakeup.flags.notifier_present) + goto out; + + status = acpi_remove_notify_handler(adev->handle, + ACPI_SYSTEM_NOTIFY, + handler); + if (ACPI_FAILURE(status)) + goto out; + + adev->wakeup.flags.notifier_present = false; + + out: + mutex_unlock(&acpi_pm_notifier_lock); + return status; +} + bool acpi_bus_can_wakeup(acpi_handle handle) { struct acpi_device *device; @@ -1023,3 +1024,4 @@ void acpi_dev_pm_remove_dependent(acpi_handle handle, struct device *depdev) mutex_unlock(&adev->physical_node_lock); } EXPORT_SYMBOL_GPL(acpi_dev_pm_remove_dependent); +#endif /* CONFIG_PM */ diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 98db31d..636c59f 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -377,7 +377,6 @@ acpi_status acpi_bus_get_status_handle(acpi_handle handle, unsigned long long *sta); int acpi_bus_get_status(struct acpi_device *device); -#ifdef CONFIG_PM int acpi_bus_set_power(acpi_handle handle, int state); const char *acpi_power_state_string(int state); int acpi_device_get_power(struct acpi_device *device, int *state); @@ -385,41 +384,12 @@ int acpi_device_set_power(struct acpi_device *device, int state); int acpi_bus_init_power(struct acpi_device *device); int acpi_bus_update_power(acpi_handle handle, int *state_p); bool acpi_bus_power_manageable(acpi_handle handle); + +#ifdef CONFIG_PM bool acpi_bus_can_wakeup(acpi_handle handle); -#else /* !CONFIG_PM */ -static inline int acpi_bus_set_power(acpi_handle handle, int state) -{ - return 0; -} -static inline const char *acpi_power_state_string(int state) -{ - return "D0"; -} -static inline int acpi_device_get_power(struct acpi_device *device, int *state) -{ - return 0; -} -static inline int acpi_device_set_power(struct acpi_device *device, int state) -{ - return 0; -} -static inline int acpi_bus_init_power(struct acpi_device *device) -{ - return 0; -} -static inline int acpi_bus_update_power(acpi_handle handle, int *state_p) -{ - return 0; -} -static inline bool acpi_bus_power_manageable(acpi_handle handle) -{ - return false; -} -static inline bool acpi_bus_can_wakeup(acpi_handle handle) -{ - return false; -} -#endif /* !CONFIG_PM */ +#else +static inline bool acpi_bus_can_wakeup(acpi_handle handle) { return false; } +#endif #ifdef CONFIG_ACPI_PROC_EVENT int acpi_bus_generate_proc_event(struct acpi_device *device, u8 type, int data); -- cgit v0.10.2 From 955ef4833574636819cd269cfbae12f79cbde63a Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 16 May 2013 05:09:58 +0000 Subject: cpufreq: Drop rwsem lock around CPUFREQ_GOV_POLICY_EXIT With the rwsem lock around __cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT), we get circular dependency when we call sysfs_remove_group(). ====================================================== [ INFO: possible circular locking dependency detected ] 3.9.0-rc7+ #15 Not tainted ------------------------------------------------------- cat/2387 is trying to acquire lock: (&per_cpu(cpu_policy_rwsem, cpu)){+++++.}, at: [] lock_policy_rwsem_read+0x25/0x34 but task is already holding lock: (s_active#41){++++.+}, at: [] sysfs_read_file+0x4f/0xcc which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (s_active#41){++++.+}: [] lock_acquire+0x61/0xbc [] sysfs_addrm_finish+0xc1/0x128 [] sysfs_hash_and_remove+0x35/0x64 [] remove_files.isra.0+0x1b/0x24 [] sysfs_remove_group+0x2d/0xa8 [] cpufreq_governor_interactive+0x13b/0x35c [] __cpufreq_governor+0x2b/0x8c [] __cpufreq_set_policy+0xa9/0xf8 [] store_scaling_governor+0x61/0x100 [] store+0x39/0x60 [] sysfs_write_file+0xed/0x114 [] vfs_write+0x65/0xd8 [] sys_write+0x2f/0x50 [] ret_fast_syscall+0x1/0x52 -> #0 (&per_cpu(cpu_policy_rwsem, cpu)){+++++.}: [] __lock_acquire+0xef3/0x13dc [] lock_acquire+0x61/0xbc [] down_read+0x25/0x30 [] lock_policy_rwsem_read+0x25/0x34 [] show+0x21/0x58 [] sysfs_read_file+0x67/0xcc [] vfs_read+0x63/0xd8 [] sys_read+0x2f/0x50 [] ret_fast_syscall+0x1/0x52 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(s_active#41); lock(&per_cpu(cpu_policy_rwsem, cpu)); lock(s_active#41); lock(&per_cpu(cpu_policy_rwsem, cpu)); *** DEADLOCK *** 2 locks held by cat/2387: #0: (&buffer->mutex){+.+.+.}, at: [] sysfs_read_file+0x25/0xcc #1: (s_active#41){++++.+}, at: [] sysfs_read_file+0x4f/0xcc stack backtrace: [] (unwind_backtrace+0x1/0x9c) from [] (print_circular_bug+0x19d/0x1e8) [] (print_circular_bug+0x19d/0x1e8) from [] (__lock_acquire+0xef3/0x13dc) [] (__lock_acquire+0xef3/0x13dc) from [] (lock_acquire+0x61/0xbc) [] (lock_acquire+0x61/0xbc) from [] (down_read+0x25/0x30) [] (down_read+0x25/0x30) from [] (lock_policy_rwsem_read+0x25/0x34) [] (lock_policy_rwsem_read+0x25/0x34) from [] (show+0x21/0x58) [] (show+0x21/0x58) from [] (sysfs_read_file+0x67/0xcc) [] (sysfs_read_file+0x67/0xcc) from [] (vfs_read+0x63/0xd8) [] (vfs_read+0x63/0xd8) from [] (sys_read+0x2f/0x50) [] (sys_read+0x2f/0x50) from [] (ret_fast_syscall+0x1/0x52) This lock isn't required while calling __cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT). Remove it. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 4b8c7f2..2d53f47 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -1729,18 +1729,23 @@ static int __cpufreq_set_policy(struct cpufreq_policy *data, /* end old governor */ if (data->governor) { __cpufreq_governor(data, CPUFREQ_GOV_STOP); + unlock_policy_rwsem_write(policy->cpu); __cpufreq_governor(data, CPUFREQ_GOV_POLICY_EXIT); + lock_policy_rwsem_write(policy->cpu); } /* start new governor */ data->governor = policy->governor; if (!__cpufreq_governor(data, CPUFREQ_GOV_POLICY_INIT)) { - if (!__cpufreq_governor(data, CPUFREQ_GOV_START)) + if (!__cpufreq_governor(data, CPUFREQ_GOV_START)) { failed = 0; - else + } else { + unlock_policy_rwsem_write(policy->cpu); __cpufreq_governor(data, CPUFREQ_GOV_POLICY_EXIT); + lock_policy_rwsem_write(policy->cpu); + } } if (failed) { -- cgit v0.10.2 From c96d53d600643ee0adfd1cb90814bd9510e62b71 Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Fri, 17 May 2013 16:10:24 +0000 Subject: cpufreq / intel_pstate: Add additional supported CPU ID Add CPU ID for Ivybrigde processor. Signed-off-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 9c36ace..07f2840 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -521,6 +521,7 @@ static void intel_pstate_timer_func(unsigned long __data) static const struct x86_cpu_id intel_pstate_cpu_ids[] = { ICPU(0x2a, default_policy), ICPU(0x2d, default_policy), + ICPU(0x3a, default_policy), {} }; MODULE_DEVICE_TABLE(x86cpu, intel_pstate_cpu_ids); -- cgit v0.10.2 From 95d38d144ab4520aea3f8fcfacc5fd62d3bf2697 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 8 Oct 2012 19:50:41 +0000 Subject: drm/nouveau: use drm_send_vblank_event() helper Signed-off-by: Rob Clark Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index 7bf22d4..f17dc2a 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -638,17 +638,8 @@ nouveau_finish_page_flip(struct nouveau_channel *chan, } s = list_first_entry(&fctx->flip, struct nouveau_page_flip_state, head); - if (s->event) { - struct drm_pending_vblank_event *e = s->event; - struct timeval now; - - do_gettimeofday(&now); - e->event.sequence = 0; - e->event.tv_sec = now.tv_sec; - e->event.tv_usec = now.tv_usec; - list_add_tail(&e->base.link, &e->base.file_priv->event_list); - wake_up_interruptible(&e->base.file_priv->event_wait); - } + if (s->event) + drm_send_vblank_event(dev, -1, s->event); list_del(&s->head); if (ps) -- cgit v0.10.2 From 26ae466732c181b7376610fd9241787698179b01 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 8 Oct 2012 19:50:42 +0000 Subject: drm/radeon: use drm_send_vblank_event() helper Signed-off-by: Rob Clark Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index e38fd55..eb18bb7 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -271,8 +271,6 @@ void radeon_crtc_handle_flip(struct radeon_device *rdev, int crtc_id) { struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc_id]; struct radeon_unpin_work *work; - struct drm_pending_vblank_event *e; - struct timeval now; unsigned long flags; u32 update_pending; int vpos, hpos; @@ -328,14 +326,9 @@ void radeon_crtc_handle_flip(struct radeon_device *rdev, int crtc_id) radeon_crtc->unpin_work = NULL; /* wakeup userspace */ - if (work->event) { - e = work->event; - e->event.sequence = drm_vblank_count_and_time(rdev->ddev, crtc_id, &now); - e->event.tv_sec = now.tv_sec; - e->event.tv_usec = now.tv_usec; - list_add_tail(&e->base.link, &e->base.file_priv->event_list); - wake_up_interruptible(&e->base.file_priv->event_wait); - } + if (work->event) + drm_send_vblank_event(rdev->ddev, crtc_id, work->event); + spin_unlock_irqrestore(&rdev->ddev->event_lock, flags); drm_vblank_put(rdev->ddev, radeon_crtc->crtc_id); -- cgit v0.10.2 From f7e96d7e28817a66db36e89f25b77bda7dba6da0 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 8 Oct 2012 19:50:45 +0000 Subject: drm/shmob: use drm_send_vblank_event() helper Signed-off-by: Rob Clark Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/shmobile/shmob_drm_crtc.c b/drivers/gpu/drm/shmobile/shmob_drm_crtc.c index 7dff49e..99e2034 100644 --- a/drivers/gpu/drm/shmobile/shmob_drm_crtc.c +++ b/drivers/gpu/drm/shmobile/shmob_drm_crtc.c @@ -451,27 +451,16 @@ void shmob_drm_crtc_finish_page_flip(struct shmob_drm_crtc *scrtc) { struct drm_pending_vblank_event *event; struct drm_device *dev = scrtc->crtc.dev; - struct timeval vblanktime; unsigned long flags; spin_lock_irqsave(&dev->event_lock, flags); event = scrtc->event; scrtc->event = NULL; + if (event) { + drm_send_vblank_event(dev, 0, event); + drm_vblank_put(dev, 0); + } spin_unlock_irqrestore(&dev->event_lock, flags); - - if (event == NULL) - return; - - event->event.sequence = drm_vblank_count_and_time(dev, 0, &vblanktime); - event->event.tv_sec = vblanktime.tv_sec; - event->event.tv_usec = vblanktime.tv_usec; - - spin_lock_irqsave(&dev->event_lock, flags); - list_add_tail(&event->base.link, &event->base.file_priv->event_list); - wake_up_interruptible(&event->base.file_priv->event_wait); - spin_unlock_irqrestore(&dev->event_lock, flags); - - drm_vblank_put(dev, 0); } static int shmob_drm_crtc_page_flip(struct drm_crtc *crtc, -- cgit v0.10.2 From 0eca56f9467038ee0b798637f03581aaa1186fac Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 8 Oct 2012 19:50:46 +0000 Subject: drm/imx: use drm_send_vblank_event() helper Also, slightly changes the behavior to always put the vblank irq, even if userspace did not request a vblank event. As far as I can tell, the previous code would leak a vblank irq refcnt if userspace requested a pageflip without event. Signed-off-by: Rob Clark Signed-off-by: Dave Airlie diff --git a/drivers/staging/imx-drm/ipuv3-crtc.c b/drivers/staging/imx-drm/ipuv3-crtc.c index b028b0d..1cd74f5 100644 --- a/drivers/staging/imx-drm/ipuv3-crtc.c +++ b/drivers/staging/imx-drm/ipuv3-crtc.c @@ -311,31 +311,14 @@ static int ipu_crtc_mode_set(struct drm_crtc *crtc, static void ipu_crtc_handle_pageflip(struct ipu_crtc *ipu_crtc) { - struct drm_pending_vblank_event *e; - struct timeval now; unsigned long flags; struct drm_device *drm = ipu_crtc->base.dev; spin_lock_irqsave(&drm->event_lock, flags); - - e = ipu_crtc->page_flip_event; - if (!e) { - spin_unlock_irqrestore(&drm->event_lock, flags); - return; - } - - do_gettimeofday(&now); - e->event.sequence = 0; - e->event.tv_sec = now.tv_sec; - e->event.tv_usec = now.tv_usec; + if (ipu_crtc->page_flip_event) + drm_send_vblank_event(drm, -1, ipu_crtc->page_flip_event); ipu_crtc->page_flip_event = NULL; - imx_drm_crtc_vblank_put(ipu_crtc->imx_crtc); - - list_add_tail(&e->base.link, &e->base.file_priv->event_list); - - wake_up_interruptible(&e->base.file_priv->event_wait); - spin_unlock_irqrestore(&drm->event_lock, flags); } -- cgit v0.10.2 From e771451c0a831d96a7c14b0ca8a8ec671d98567b Mon Sep 17 00:00:00 2001 From: Vincent Pelletier Date: Sat, 18 May 2013 18:44:04 +0200 Subject: libata: make ata_exec_internal_sg honor DMADIR MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit libata honors DMADIR for regular commands, but not for internal commands used (among other) during device initialisation. This makes SATA-host-to-PATA-device bridges based on Silicon Image SiL3611 (such as "Abit Serillel 2") end up disabled when used with an ATAPI device after a few tries. Log output of the bridge being hot-plugged with an ATAPI drive: [ 9631.212901] ata1: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen [ 9631.212913] ata1: irq_stat 0x00000040, connection status changed [ 9631.212923] ata1: SError: { CommWake 10B8B DevExch } [ 9631.212939] ata1: hard resetting link [ 9632.104962] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9632.106393] ata1.00: ATAPI: PIONEER DVD-RW DVR-115, 1.06, max UDMA/33 [ 9632.106407] ata1.00: applying bridge limits [ 9632.108151] ata1.00: configured for UDMA/33 [ 9637.105303] ata1.00: qc timeout (cmd 0xa0) [ 9637.105324] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5) [ 9637.105335] ata1: hard resetting link [ 9638.044599] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9638.047878] ata1.00: configured for UDMA/33 [ 9643.044933] ata1.00: qc timeout (cmd 0xa0) [ 9643.044953] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5) [ 9643.044963] ata1: limiting SATA link speed to 1.5 Gbps [ 9643.044971] ata1.00: limiting speed to UDMA/33:PIO3 [ 9643.044979] ata1: hard resetting link [ 9643.984225] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 9643.987471] ata1.00: configured for UDMA/33 [ 9648.984591] ata1.00: qc timeout (cmd 0xa0) [ 9648.984612] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5) [ 9648.984619] ata1.00: disabled [ 9649.000593] ata1: hard resetting link [ 9649.939902] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 9649.955864] ata1: EH complete With this patch, the drive enumerates correctly when libata is loaded with atapi_dmadir=1: [ 9891.810863] ata1: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen [ 9891.810874] ata1: irq_stat 0x00000040, connection status changed [ 9891.810884] ata1: SError: { CommWake 10B8B DevExch } [ 9891.810900] ata1: hard resetting link [ 9892.762105] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9892.763544] ata1.00: ATAPI: PIONEER DVD-RW DVR-115, 1.06, max UDMA/33, DMADIR [ 9892.763558] ata1.00: applying bridge limits [ 9892.765393] ata1.00: configured for UDMA/33 [ 9892.786063] ata1: EH complete [ 9892.792062] scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-115 1.06 PQ: 0 ANSI: 5 [ 9892.798455] sr2: scsi3-mmc drive: 12x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 9892.798837] sr 0:0:0:0: Attached scsi CD-ROM sr2 [ 9892.799109] sr 0:0:0:0: Attached scsi generic sg6 type 5 Based on a patch by Csaba Halász on linux-ide: http://marc.info/?l=linux-ide&m=136121147832295&w=2 tj: minor formatting changes. Signed-off-by: Vincent Pelletier Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index d35524c..f218427 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1602,6 +1602,12 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, qc->tf = *tf; if (cdb) memcpy(qc->cdb, cdb, ATAPI_CDB_LEN); + + /* some SATA bridges need us to indicate data xfer direction */ + if (tf->protocol == ATAPI_PROT_DMA && (dev->flags & ATA_DFLAG_DMADIR) && + dma_dir == DMA_FROM_DEVICE) + qc->tf.feature |= ATAPI_DMADIR; + qc->flags |= ATA_QCFLAG_RESULT_TF; qc->dma_dir = dma_dir; if (dma_dir != DMA_NONE) { -- cgit v0.10.2 From 154c2670087bd7f54688274aca627433e4a7c181 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 10:51:10 +0200 Subject: Add include dependencies to . MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If has not been included before , a build error like the below one will result: CC arch/mips/kernel/idle.o In file included from arch/mips/kernel/idle.c:17:0: include/linux/printk.h:109:1: error: data definition has no type or storage class [-Werror] include/linux/printk.h:109:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int] include/linux/printk.h:110:1: error: ‘format’ attribute only applies to function types [-Werror=attributes] include/linux/printk.h:110:1: error: expected ‘,’ or ‘;’ before ‘int’ include/linux/printk.h:114:1: error: data definition has no type or storage class [-Werror] include/linux/printk.h:114:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int] include/linux/printk.h:115:1: error: ‘format’ attribute only applies to function types [-Werror=attributes] include/linux/printk.h:115:1: error: expected ‘,’ or ‘;’ before ‘int’ include/linux/printk.h:117:1: error: data definition has no type or storage class [-Werror] include/linux/printk.h:117:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int] include/linux/printk.h:118:1: error: ‘format’ attribute only applies to function types [-Werror=attributes] include/linux/printk.h:118:1: error: ‘__cold__’ attribute ignored [-Werror=attributes] include/linux/printk.h:118:1: error: expected ‘,’ or ‘;’ before ‘asmlinkage’ include/linux/printk.h:122:1: error: data definition has no type or storage class [-Werror] include/linux/printk.h:122:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int] include/linux/printk.h:123:1: error: ‘format’ attribute only applies to function types [-Werror=attributes] include/linux/printk.h:123:1: error: ‘__cold__’ attribute ignored [-Werror=attributes] include/linux/printk.h:123:1: error: expected ‘,’ or ‘;’ before ‘int’ In file included from include/linux/kernel.h:14:0, from include/linux/sched.h:15, from arch/mips/kernel/idle.c:18: include/linux/dynamic_debug.h: In function ‘ddebug_dyndbg_module_param_cb’: include/linux/dynamic_debug.h:124:3: error: implicit declaration of function ‘printk’ [-Werror=implicit-function-declaration] Fixed by including . Signed-off-by: Ralf Baechle diff --git a/include/linux/printk.h b/include/linux/printk.h index 6af944a..22c7052 100644 --- a/include/linux/printk.h +++ b/include/linux/printk.h @@ -4,6 +4,7 @@ #include #include #include +#include extern const char linux_banner[]; extern const char linux_proc_banner[]; -- cgit v0.10.2 From 1a461c5bdcc815280fa5f51e3775bc05ed98af13 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 16:26:22 +0200 Subject: MIPS: clock.h: Remove declaration of cpu_wait. Duplicate and has no business in this header file. Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/clock.h b/arch/mips/include/asm/clock.h index c9456e7..778e32d 100644 --- a/arch/mips/include/asm/clock.h +++ b/arch/mips/include/asm/clock.h @@ -6,8 +6,6 @@ #include #include -extern void (*cpu_wait) (void); - struct clk; struct clk_ops { -- cgit v0.10.2 From 49f2ec91e14ce9bb20fdac88a38243129f3261c3 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 10:53:37 +0200 Subject: MIPS: Consolidate idle loop / WAIT instruction support in a single file. Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 6ad9e04..423d871 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -4,7 +4,7 @@ extra-y := head.o vmlinux.lds -obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \ +obj-y += cpu-probe.o branch.o entry.o genex.o idle.o irq.o process.o \ prom.o ptrace.o reset.o setup.o signal.o syscall.o \ time.o topology.o traps.o unaligned.o watch.o vdso.o diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 4bbffdb..c6568bf 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -27,105 +27,6 @@ #include #include -/* - * Not all of the MIPS CPUs have the "wait" instruction available. Moreover, - * the implementation of the "wait" feature differs between CPU families. This - * points to the function that implements CPU specific wait. - * The wait instruction stops the pipeline and reduces the power consumption of - * the CPU very much. - */ -void (*cpu_wait)(void); -EXPORT_SYMBOL(cpu_wait); - -static void r3081_wait(void) -{ - unsigned long cfg = read_c0_conf(); - write_c0_conf(cfg | R30XX_CONF_HALT); -} - -static void r39xx_wait(void) -{ - local_irq_disable(); - if (!need_resched()) - write_c0_conf(read_c0_conf() | TX39_CONF_HALT); - local_irq_enable(); -} - -extern void r4k_wait(void); - -/* - * This variant is preferable as it allows testing need_resched and going to - * sleep depending on the outcome atomically. Unfortunately the "It is - * implementation-dependent whether the pipeline restarts when a non-enabled - * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes - * using this version a gamble. - */ -void r4k_wait_irqoff(void) -{ - local_irq_disable(); - if (!need_resched()) - __asm__(" .set push \n" - " .set mips3 \n" - " wait \n" - " .set pop \n"); - local_irq_enable(); - __asm__(" .globl __pastwait \n" - "__pastwait: \n"); -} - -/* - * The RM7000 variant has to handle erratum 38. The workaround is to not - * have any pending stores when the WAIT instruction is executed. - */ -static void rm7k_wait_irqoff(void) -{ - local_irq_disable(); - if (!need_resched()) - __asm__( - " .set push \n" - " .set mips3 \n" - " .set noat \n" - " mfc0 $1, $12 \n" - " sync \n" - " mtc0 $1, $12 # stalls until W stage \n" - " wait \n" - " mtc0 $1, $12 # stalls until W stage \n" - " .set pop \n"); - local_irq_enable(); -} - -/* - * The Au1xxx wait is available only if using 32khz counter or - * external timer source, but specifically not CP0 Counter. - * alchemy/common/time.c may override cpu_wait! - */ -static void au1k_wait(void) -{ - __asm__(" .set mips3 \n" - " cache 0x14, 0(%0) \n" - " cache 0x14, 32(%0) \n" - " sync \n" - " nop \n" - " wait \n" - " nop \n" - " nop \n" - " nop \n" - " nop \n" - " .set mips0 \n" - : : "r" (au1k_wait)); -} - -static int __initdata nowait; - -static int __init wait_disable(char *s) -{ - nowait = 1; - - return 1; -} - -__setup("nowait", wait_disable); - static int __cpuinitdata mips_fpu_disabled; static int __init fpu_disable(char *s) @@ -150,105 +51,6 @@ static int __init dsp_disable(char *s) __setup("nodsp", dsp_disable); -void __init check_wait(void) -{ - struct cpuinfo_mips *c = ¤t_cpu_data; - - if (nowait) { - printk("Wait instruction disabled.\n"); - return; - } - - switch (c->cputype) { - case CPU_R3081: - case CPU_R3081E: - cpu_wait = r3081_wait; - break; - case CPU_TX3927: - cpu_wait = r39xx_wait; - break; - case CPU_R4200: -/* case CPU_R4300: */ - case CPU_R4600: - case CPU_R4640: - case CPU_R4650: - case CPU_R4700: - case CPU_R5000: - case CPU_R5500: - case CPU_NEVADA: - case CPU_4KC: - case CPU_4KEC: - case CPU_4KSC: - case CPU_5KC: - case CPU_25KF: - case CPU_PR4450: - case CPU_BMIPS3300: - case CPU_BMIPS4350: - case CPU_BMIPS4380: - case CPU_BMIPS5000: - case CPU_CAVIUM_OCTEON: - case CPU_CAVIUM_OCTEON_PLUS: - case CPU_CAVIUM_OCTEON2: - case CPU_JZRISC: - case CPU_LOONGSON1: - case CPU_XLR: - case CPU_XLP: - cpu_wait = r4k_wait; - break; - - case CPU_RM7000: - cpu_wait = rm7k_wait_irqoff; - break; - - case CPU_M14KC: - case CPU_M14KEC: - case CPU_24K: - case CPU_34K: - case CPU_1004K: - cpu_wait = r4k_wait; - if (read_c0_config7() & MIPS_CONF7_WII) - cpu_wait = r4k_wait_irqoff; - break; - - case CPU_74K: - cpu_wait = r4k_wait; - if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0)) - cpu_wait = r4k_wait_irqoff; - break; - - case CPU_TX49XX: - cpu_wait = r4k_wait_irqoff; - break; - case CPU_ALCHEMY: - cpu_wait = au1k_wait; - break; - case CPU_20KC: - /* - * WAIT on Rev1.0 has E1, E2, E3 and E16. - * WAIT on Rev2.0 and Rev3.0 has E16. - * Rev3.1 WAIT is nop, why bother - */ - if ((c->processor_id & 0xff) <= 0x64) - break; - - /* - * Another rev is incremeting c0_count at a reduced clock - * rate while in WAIT mode. So we basically have the choice - * between using the cp0 timer as clocksource or avoiding - * the WAIT instruction. Until more details are known, - * disable the use of WAIT for 20Kc entirely. - cpu_wait = r4k_wait; - */ - break; - case CPU_RM9000: - if ((c->processor_id & 0x00ff) >= 0x40) - cpu_wait = r4k_wait; - break; - default: - break; - } -} - static inline void check_errata(void) { struct cpuinfo_mips *c = ¤t_cpu_data; diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c new file mode 100644 index 0000000..1e9d938 --- /dev/null +++ b/arch/mips/kernel/idle.c @@ -0,0 +1,232 @@ +/* + * MIPS idle loop and WAIT instruction support. + * + * Copyright (C) xxxx the Anonymous + * Copyright (C) 1994 - 2006 Ralf Baechle + * Copyright (C) 2003, 2004 Maciej W. Rozycki + * Copyright (C) 2001, 2004, 2011, 2012 MIPS Technologies, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Not all of the MIPS CPUs have the "wait" instruction available. Moreover, + * the implementation of the "wait" feature differs between CPU families. This + * points to the function that implements CPU specific wait. + * The wait instruction stops the pipeline and reduces the power consumption of + * the CPU very much. + */ +void (*cpu_wait)(void); +EXPORT_SYMBOL(cpu_wait); + +static void r3081_wait(void) +{ + unsigned long cfg = read_c0_conf(); + write_c0_conf(cfg | R30XX_CONF_HALT); +} + +static void r39xx_wait(void) +{ + local_irq_disable(); + if (!need_resched()) + write_c0_conf(read_c0_conf() | TX39_CONF_HALT); + local_irq_enable(); +} + +extern void r4k_wait(void); + +/* + * This variant is preferable as it allows testing need_resched and going to + * sleep depending on the outcome atomically. Unfortunately the "It is + * implementation-dependent whether the pipeline restarts when a non-enabled + * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes + * using this version a gamble. + */ +void r4k_wait_irqoff(void) +{ + local_irq_disable(); + if (!need_resched()) + __asm__(" .set push \n" + " .set mips3 \n" + " wait \n" + " .set pop \n"); + local_irq_enable(); + __asm__(" .globl __pastwait \n" + "__pastwait: \n"); +} + +/* + * The RM7000 variant has to handle erratum 38. The workaround is to not + * have any pending stores when the WAIT instruction is executed. + */ +static void rm7k_wait_irqoff(void) +{ + local_irq_disable(); + if (!need_resched()) + __asm__( + " .set push \n" + " .set mips3 \n" + " .set noat \n" + " mfc0 $1, $12 \n" + " sync \n" + " mtc0 $1, $12 # stalls until W stage \n" + " wait \n" + " mtc0 $1, $12 # stalls until W stage \n" + " .set pop \n"); + local_irq_enable(); +} + +/* + * The Au1xxx wait is available only if using 32khz counter or + * external timer source, but specifically not CP0 Counter. + * alchemy/common/time.c may override cpu_wait! + */ +static void au1k_wait(void) +{ + __asm__(" .set mips3 \n" + " cache 0x14, 0(%0) \n" + " cache 0x14, 32(%0) \n" + " sync \n" + " nop \n" + " wait \n" + " nop \n" + " nop \n" + " nop \n" + " nop \n" + " .set mips0 \n" + : : "r" (au1k_wait)); +} + +static int __initdata nowait; + +static int __init wait_disable(char *s) +{ + nowait = 1; + + return 1; +} + +__setup("nowait", wait_disable); + +void __init check_wait(void) +{ + struct cpuinfo_mips *c = ¤t_cpu_data; + + if (nowait) { + printk("Wait instruction disabled.\n"); + return; + } + + switch (c->cputype) { + case CPU_R3081: + case CPU_R3081E: + cpu_wait = r3081_wait; + break; + case CPU_TX3927: + cpu_wait = r39xx_wait; + break; + case CPU_R4200: +/* case CPU_R4300: */ + case CPU_R4600: + case CPU_R4640: + case CPU_R4650: + case CPU_R4700: + case CPU_R5000: + case CPU_R5500: + case CPU_NEVADA: + case CPU_4KC: + case CPU_4KEC: + case CPU_4KSC: + case CPU_5KC: + case CPU_25KF: + case CPU_PR4450: + case CPU_BMIPS3300: + case CPU_BMIPS4350: + case CPU_BMIPS4380: + case CPU_BMIPS5000: + case CPU_CAVIUM_OCTEON: + case CPU_CAVIUM_OCTEON_PLUS: + case CPU_CAVIUM_OCTEON2: + case CPU_JZRISC: + case CPU_LOONGSON1: + case CPU_XLR: + case CPU_XLP: + cpu_wait = r4k_wait; + break; + + case CPU_RM7000: + cpu_wait = rm7k_wait_irqoff; + break; + + case CPU_M14KC: + case CPU_M14KEC: + case CPU_24K: + case CPU_34K: + case CPU_1004K: + cpu_wait = r4k_wait; + if (read_c0_config7() & MIPS_CONF7_WII) + cpu_wait = r4k_wait_irqoff; + break; + + case CPU_74K: + cpu_wait = r4k_wait; + if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0)) + cpu_wait = r4k_wait_irqoff; + break; + + case CPU_TX49XX: + cpu_wait = r4k_wait_irqoff; + break; + case CPU_ALCHEMY: + cpu_wait = au1k_wait; + break; + case CPU_20KC: + /* + * WAIT on Rev1.0 has E1, E2, E3 and E16. + * WAIT on Rev2.0 and Rev3.0 has E16. + * Rev3.1 WAIT is nop, why bother + */ + if ((c->processor_id & 0xff) <= 0x64) + break; + + /* + * Another rev is incremeting c0_count at a reduced clock + * rate while in WAIT mode. So we basically have the choice + * between using the cp0 timer as clocksource or avoiding + * the WAIT instruction. Until more details are known, + * disable the use of WAIT for 20Kc entirely. + cpu_wait = r4k_wait; + */ + break; + case CPU_RM9000: + if ((c->processor_id & 0x00ff) >= 0x40) + cpu_wait = r4k_wait; + break; + default: + break; + } +} + +void arch_cpu_idle(void) +{ +#ifdef CONFIG_MIPS_MT_SMTC + extern void smtc_idle_loop_hook(void); + + smtc_idle_loop_hook(); +#endif + if (cpu_wait) + (*cpu_wait)(); + else + local_irq_enable(); +} diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index a682a87..c6a041d 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -51,19 +51,6 @@ void arch_cpu_idle_dead(void) } #endif -void arch_cpu_idle(void) -{ -#ifdef CONFIG_MIPS_MT_SMTC - extern void smtc_idle_loop_hook(void); - - smtc_idle_loop_hook(); -#endif - if (cpu_wait) - (*cpu_wait)(); - else - local_irq_enable(); -} - asmlinkage void ret_from_fork(void); asmlinkage void ret_from_kernel_thread(void); -- cgit v0.10.2 From 00baf8576c29c93a470bdfc98a5c121a49c2f34b Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 12:47:26 +0200 Subject: MIPS: Idle: cleaup SMTC idle hook as per Linux coding style. Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c index 1e9d938..28abda7 100644 --- a/arch/mips/kernel/idle.c +++ b/arch/mips/kernel/idle.c @@ -218,13 +218,18 @@ void __init check_wait(void) } } -void arch_cpu_idle(void) +static void smtc_idle_hook(void) { #ifdef CONFIG_MIPS_MT_SMTC - extern void smtc_idle_loop_hook(void); + void smtc_idle_loop_hook(void); smtc_idle_loop_hook(); #endif +} + +void arch_cpu_idle(void) +{ + smtc_idle_hook(); if (cpu_wait) (*cpu_wait)(); else -- cgit v0.10.2 From f91a148aa22b3808c12525ccc5779ff0ae6314a4 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 12:58:08 +0200 Subject: MIPS: Idle: Consistently reformat inline assembler. Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c index 28abda7..b33875b 100644 --- a/arch/mips/kernel/idle.c +++ b/arch/mips/kernel/idle.c @@ -57,13 +57,15 @@ void r4k_wait_irqoff(void) { local_irq_disable(); if (!need_resched()) - __asm__(" .set push \n" - " .set mips3 \n" - " wait \n" - " .set pop \n"); + __asm__( + " .set push \n" + " .set mips3 \n" + " wait \n" + " .set pop \n"); local_irq_enable(); - __asm__(" .globl __pastwait \n" - "__pastwait: \n"); + __asm__( + " .globl __pastwait \n" + "__pastwait: \n"); } /* @@ -94,18 +96,19 @@ static void rm7k_wait_irqoff(void) */ static void au1k_wait(void) { - __asm__(" .set mips3 \n" - " cache 0x14, 0(%0) \n" - " cache 0x14, 32(%0) \n" - " sync \n" - " nop \n" - " wait \n" - " nop \n" - " nop \n" - " nop \n" - " nop \n" - " .set mips0 \n" - : : "r" (au1k_wait)); + __asm__( + " .set mips3 \n" + " cache 0x14, 0(%0) \n" + " cache 0x14, 32(%0) \n" + " sync \n" + " nop \n" + " wait \n" + " nop \n" + " nop \n" + " nop \n" + " nop \n" + " .set mips0 \n" + : : "r" (au1k_wait)); } static int __initdata nowait; -- cgit v0.10.2 From c9b6869dbb3c6edb24e3cc76d3655067cfa7b802 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 13:02:12 +0200 Subject: MIPS: Idle: Make call of function pointer readable. Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c index b33875b..36e79f5 100644 --- a/arch/mips/kernel/idle.c +++ b/arch/mips/kernel/idle.c @@ -234,7 +234,7 @@ void arch_cpu_idle(void) { smtc_idle_hook(); if (cpu_wait) - (*cpu_wait)(); + cpu_wait(); else local_irq_enable(); } -- cgit v0.10.2 From fb40bc3e94933007d3e42e96daf1ec8044821cb8 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 14:05:27 +0200 Subject: MIPS: Idle: Re-enable irqs at the end of r3081, au1k and loongson2 cpu_wait. Without this, the WARN_ON_ONCE(irqs_disabled()); in the idle loop will be triggered. Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c index 36e79f5..78cc7d6 100644 --- a/arch/mips/kernel/idle.c +++ b/arch/mips/kernel/idle.c @@ -34,6 +34,7 @@ static void r3081_wait(void) { unsigned long cfg = read_c0_conf(); write_c0_conf(cfg | R30XX_CONF_HALT); + local_irq_enable(); } static void r39xx_wait(void) @@ -109,6 +110,7 @@ static void au1k_wait(void) " nop \n" " .set mips0 \n" : : "r" (au1k_wait)); + local_irq_enable(); } static int __initdata nowait; diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c index 8488957..868976d 100644 --- a/drivers/cpufreq/loongson2_cpufreq.c +++ b/drivers/cpufreq/loongson2_cpufreq.c @@ -200,6 +200,7 @@ static void loongson2_cpu_wait(void) LOONGSON_CHIPCFG0 &= ~0x7; /* Put CPU into wait mode */ LOONGSON_CHIPCFG0 = cpu_freq; /* Restore CPU state */ spin_unlock_irqrestore(&loongson2_wait_lock, flags); + local_irq_enable(); } static int __init cpufreq_init(void) -- cgit v0.10.2 From d882f07a83642283b9bc4e7f4c56ac4982c5e629 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 14:14:48 +0200 Subject: MIPS: Idle: Don't call local_irq_disable() in cpu_wait() implementations. The generic idle loop has already disabled interrupts so this is redundant. Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c index 78cc7d6..1f85dda 100644 --- a/arch/mips/kernel/idle.c +++ b/arch/mips/kernel/idle.c @@ -39,7 +39,6 @@ static void r3081_wait(void) static void r39xx_wait(void) { - local_irq_disable(); if (!need_resched()) write_c0_conf(read_c0_conf() | TX39_CONF_HALT); local_irq_enable(); @@ -56,7 +55,6 @@ extern void r4k_wait(void); */ void r4k_wait_irqoff(void) { - local_irq_disable(); if (!need_resched()) __asm__( " .set push \n" @@ -75,7 +73,6 @@ void r4k_wait_irqoff(void) */ static void rm7k_wait_irqoff(void) { - local_irq_disable(); if (!need_resched()) __asm__( " .set push \n" -- cgit v0.10.2 From bdc92d74e0ec95a8101447467c25f015105f2e5a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 16:59:19 +0200 Subject: MIPS: Idle: Consolidate all declarations in . Signed-off-by: Ralf Baechle diff --git a/arch/mips/alchemy/board-gpr.c b/arch/mips/alchemy/board-gpr.c index cb0f6af..9edc35f 100644 --- a/arch/mips/alchemy/board-gpr.c +++ b/arch/mips/alchemy/board-gpr.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c index 38afb11..93fa586 100644 --- a/arch/mips/alchemy/common/time.c +++ b/arch/mips/alchemy/common/time.c @@ -36,6 +36,7 @@ #include #include +#include #include #include #include diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c index a0233a2..8be4e85 100644 --- a/arch/mips/ath79/setup.c +++ b/arch/mips/ath79/setup.c @@ -19,6 +19,7 @@ #include #include +#include #include /* for mips_hpt_frequency */ #include /* for _machine_{restart,halt} */ #include diff --git a/arch/mips/cobalt/reset.c b/arch/mips/cobalt/reset.c index 516b442..4eedd48 100644 --- a/arch/mips/cobalt/reset.c +++ b/arch/mips/cobalt/reset.c @@ -12,6 +12,7 @@ #include #include +#include #include #include diff --git a/arch/mips/include/asm/idle.h b/arch/mips/include/asm/idle.h new file mode 100644 index 0000000..8b26ac5 --- /dev/null +++ b/arch/mips/include/asm/idle.h @@ -0,0 +1,11 @@ +#ifndef __ASM_IDLE_H +#define __ASM_IDLE_H + +#include + +extern void (*cpu_wait)(void); +extern asmlinkage void r4k_wait(void); +extern void r4k_wait_irqoff(void); +extern void __pastwait(void); + +#endif /* __ASM_IDLE_H */ diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h index 71686c8..1470b7b 100644 --- a/arch/mips/include/asm/processor.h +++ b/arch/mips/include/asm/processor.h @@ -28,7 +28,6 @@ /* * System setup and hardware flags.. */ -extern void (*cpu_wait)(void); extern unsigned int vced_count, vcei_count; diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c index 1f85dda..985cc02 100644 --- a/arch/mips/kernel/idle.c +++ b/arch/mips/kernel/idle.c @@ -18,6 +18,7 @@ #include #include #include +#include #include /* @@ -44,8 +45,6 @@ static void r39xx_wait(void) local_irq_enable(); } -extern void r4k_wait(void); - /* * This variant is preferable as it allows testing need_resched and going to * sleep depending on the outcome atomically. Unfortunately the "It is diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c index a3e4614..acb3437 100644 --- a/arch/mips/kernel/proc.c +++ b/arch/mips/kernel/proc.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index c17619f..6e7862a 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -37,6 +37,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 7186222..46303bc 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include #include @@ -858,7 +859,6 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) unsigned long flags; int mtflags; unsigned long tcrestart; - extern void r4k_wait_irqoff(void), __pastwait(void); int set_resched_flag = (type == LINUX_SMP_IPI && action == SMP_RESCHEDULE_YOURSELF); diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index cb14db3..c6da4a9 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -41,6 +41,7 @@ #include #include #include +#include #include #include #include @@ -57,7 +58,6 @@ #include extern void check_wait(void); -extern asmlinkage void r4k_wait(void); extern asmlinkage void rollback_handle_int(void); extern asmlinkage void handle_int(void); extern u32 handle_tlbl[]; diff --git a/arch/mips/loongson/common/reset.c b/arch/mips/loongson/common/reset.c index 35c8c64..65bfbb5 100644 --- a/arch/mips/loongson/common/reset.c +++ b/arch/mips/loongson/common/reset.c @@ -12,6 +12,7 @@ #include #include +#include #include #include diff --git a/arch/mips/loongson1/common/reset.c b/arch/mips/loongson1/common/reset.c index d4f610f..547f34b 100644 --- a/arch/mips/loongson1/common/reset.c +++ b/arch/mips/loongson1/common/reset.c @@ -9,6 +9,7 @@ #include #include +#include #include #include diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c index af31914..eaa99d2 100644 --- a/arch/mips/netlogic/xlp/setup.c +++ b/arch/mips/netlogic/xlp/setup.c @@ -37,6 +37,7 @@ #include #include +#include #include #include #include diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c index e3e0941..89c8c10 100644 --- a/arch/mips/netlogic/xlr/setup.c +++ b/arch/mips/netlogic/xlr/setup.c @@ -36,6 +36,7 @@ #include #include +#include #include #include #include diff --git a/arch/mips/pmcs-msp71xx/msp_setup.c b/arch/mips/pmcs-msp71xx/msp_setup.c index 1651cfd..396b296 100644 --- a/arch/mips/pmcs-msp71xx/msp_setup.c +++ b/arch/mips/pmcs-msp71xx/msp_setup.c @@ -12,6 +12,7 @@ #include #include +#include #include #include #include diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 5364aab..681e7f8 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/mips/vr41xx/common/pmu.c b/arch/mips/vr41xx/common/pmu.c index 70a3f90..d7f7558 100644 --- a/arch/mips/vr41xx/common/pmu.c +++ b/arch/mips/vr41xx/common/pmu.c @@ -27,6 +27,7 @@ #include #include +#include #include #include #include diff --git a/arch/mips/wrppmc/reset.c b/arch/mips/wrppmc/reset.c index cc5474b..80beb18 100644 --- a/arch/mips/wrppmc/reset.c +++ b/arch/mips/wrppmc/reset.c @@ -9,6 +9,7 @@ #include #include +#include #include #include diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c index 868976d..d539127 100644 --- a/drivers/cpufreq/loongson2_cpufreq.c +++ b/drivers/cpufreq/loongson2_cpufreq.c @@ -18,6 +18,7 @@ #include #include +#include #include -- cgit v0.10.2 From f94d9a8ef9aebab5317d11fb1633ba14ad240983 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 17:30:36 +0200 Subject: MIPS: Idle: Do address fiddlery in helper functions. Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/idle.h b/arch/mips/include/asm/idle.h index 8b26ac5..be6f807 100644 --- a/arch/mips/include/asm/idle.h +++ b/arch/mips/include/asm/idle.h @@ -8,4 +8,15 @@ extern asmlinkage void r4k_wait(void); extern void r4k_wait_irqoff(void); extern void __pastwait(void); +static inline int using_rollback_handler(void) +{ + return cpu_wait == r4k_wait; +} + +static inline int address_is_in_r4k_wait_irqoff(unsigned long addr) +{ + return addr >= (unsigned long)r4k_wait_irqoff && + addr < (unsigned long)__pastwait; +} + #endif /* __ASM_IDLE_H */ diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 46303bc..75a4fd7 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -914,8 +914,7 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) */ if (cpu_wait == r4k_wait_irqoff) { tcrestart = read_tc_c0_tcrestart(); - if (tcrestart >= (unsigned long)r4k_wait_irqoff - && tcrestart < (unsigned long)__pastwait) { + if (address_is_in_r4k_wait_irqoff(tcrestart)) { write_tc_c0_tcrestart(__pastwait); tcstatus &= ~TCSTATUS_IXMT; write_tc_c0_tcstatus(tcstatus); diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index c6da4a9..e3be670 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1542,7 +1542,7 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs) extern char except_vec_vi, except_vec_vi_lui; extern char except_vec_vi_ori, except_vec_vi_end; extern char rollback_except_vec_vi; - char *vec_start = (cpu_wait == r4k_wait) ? + char *vec_start = using_rollback_handler() ? &rollback_except_vec_vi : &except_vec_vi; #ifdef CONFIG_MIPS_MT_SMTC /* @@ -1812,10 +1812,8 @@ void __init trap_init(void) extern char except_vec4; extern char except_vec3_r4000; unsigned long i; - int rollback; check_wait(); - rollback = (cpu_wait == r4k_wait); #if defined(CONFIG_KGDB) if (kgdb_early_setup) @@ -1892,7 +1890,8 @@ void __init trap_init(void) if (board_be_init) board_be_init(); - set_except_vector(0, rollback ? rollback_handle_int : handle_int); + set_except_vector(0, using_rollback_handler() ? rollback_handle_int + : handle_int); set_except_vector(1, handle_tlbm); set_except_vector(2, handle_tlbl); set_except_vector(3, handle_tlbs); -- cgit v0.10.2 From 087d990b371c59edbfc119600e2d2eda18366292 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 17:33:32 +0200 Subject: MIPS: Idle: Break r4k_wait into two functions and fix it. local_irq_enable() may expand into very different code, so it rather should stay in C. Also this keeps the assembler code size constant which keeps the rollback code simple. So it's best to split r4k_wait into two parts, one C and one assembler. Finally add the local_irq_enable() to r4k_wait to ensure the WAIT instruction in __r4k_wait() will work properly. Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/idle.h b/arch/mips/include/asm/idle.h index be6f807..d192158 100644 --- a/arch/mips/include/asm/idle.h +++ b/arch/mips/include/asm/idle.h @@ -4,7 +4,8 @@ #include extern void (*cpu_wait)(void); -extern asmlinkage void r4k_wait(void); +extern void r4k_wait(void); +extern asmlinkage void __r4k_wait(void); extern void r4k_wait_irqoff(void); extern void __pastwait(void); diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index 9098829..31fa856 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -122,7 +122,7 @@ handle_vcei: __FINIT .align 5 /* 32 byte rollback region */ -LEAF(r4k_wait) +LEAF(__r4k_wait) .set push .set noreorder /* start of rollback region */ @@ -146,14 +146,14 @@ LEAF(r4k_wait) jr ra nop .set pop - END(r4k_wait) + END(__r4k_wait) .macro BUILD_ROLLBACK_PROLOGUE handler FEXPORT(rollback_\handler) .set push .set noat MFC0 k0, CP0_EPC - PTR_LA k1, r4k_wait + PTR_LA k1, __r4k_wait ori k0, 0x1f /* 32 byte rollback region */ xori k0, 0x1f bne k0, k1, 9f diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c index 985cc02..3b09b88 100644 --- a/arch/mips/kernel/idle.c +++ b/arch/mips/kernel/idle.c @@ -45,6 +45,12 @@ static void r39xx_wait(void) local_irq_enable(); } +void r4k_wait(void) +{ + local_irq_enable(); + __r4k_wait(); +} + /* * This variant is preferable as it allows testing need_resched and going to * sleep depending on the outcome atomically. Unfortunately the "It is -- cgit v0.10.2 From df7e131f6359f20ed8f0a37db039c4f6420a18c2 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 21 May 2013 23:07:54 +0400 Subject: sata_rcar: clear STOP bit in bmdma_start() method Iff bmdma_setup() has to stop a DMA transfer before starting a new one, then the STOP bit in the ATAPI_CONTROL1 register will remain set (it's only cleared when setting the START bit to 1) and then bmdma_start() method will set both START and STOP bits simultaneously which should abort the transfer being just started. Avoid that by explicitly clearing the STOP bit in bmdma_start() method (in this case it will be ignored on write). Signed-off-by: Sergei Shtylyov Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c index 4799868..a8e091a 100644 --- a/drivers/ata/sata_rcar.c +++ b/drivers/ata/sata_rcar.c @@ -549,6 +549,7 @@ static void sata_rcar_bmdma_start(struct ata_queued_cmd *qc) /* start host DMA transaction */ dmactl = ioread32(priv->base + ATAPI_CONTROL1_REG); + dmactl &= ~ATAPI_CONTROL1_STOP; dmactl |= ATAPI_CONTROL1_START; iowrite32(dmactl, priv->base + ATAPI_CONTROL1_REG); } -- cgit v0.10.2 From 41eab402b43f1ca3e1279595bc138f5ac2a914f7 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 29 Apr 2013 12:27:05 +0530 Subject: drm/exynos: exynos_drm_fbdev: Fix incorrect usage of IS_ERR_OR_NULL exynos_drm_framebuffer_init() does not return NULL. Use IS_ERR instead. Signed-off-by: Sachin Kamat Signed-off-by: Inki Dae diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c index 68f0045..8f007aa 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c @@ -182,7 +182,7 @@ static int exynos_drm_fbdev_create(struct drm_fb_helper *helper, helper->fb = exynos_drm_framebuffer_init(dev, &mode_cmd, &exynos_gem_obj->base); - if (IS_ERR_OR_NULL(helper->fb)) { + if (IS_ERR(helper->fb)) { DRM_ERROR("failed to create drm framebuffer.\n"); ret = PTR_ERR(helper->fb); goto err_destroy_gem; -- cgit v0.10.2 From f02504587ed5669cc721a1f2351322e6badfe67f Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 29 Apr 2013 12:27:06 +0530 Subject: drm/exynos: exynos_drm_ipp: Fix incorrect usage of IS_ERR_OR_NULL None of these functions actually return a NULL pointer. Hence use IS_ERR() instead. Signed-off-by: Sachin Kamat Signed-off-by: Inki Dae diff --git a/drivers/gpu/drm/exynos/exynos_drm_ipp.c b/drivers/gpu/drm/exynos/exynos_drm_ipp.c index 29d2ad3..5c4764a 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_ipp.c +++ b/drivers/gpu/drm/exynos/exynos_drm_ipp.c @@ -222,7 +222,7 @@ static struct exynos_drm_ippdrv *ipp_find_driver(struct ipp_context *ctx, /* find ipp driver using idr */ ippdrv = ipp_find_obj(&ctx->ipp_idr, &ctx->ipp_lock, ipp_id); - if (IS_ERR_OR_NULL(ippdrv)) { + if (IS_ERR(ippdrv)) { DRM_ERROR("not found ipp%d driver.\n", ipp_id); return ippdrv; } @@ -388,7 +388,7 @@ static int ipp_find_and_set_property(struct drm_exynos_ipp_property *property) DRM_DEBUG_KMS("%s:prop_id[%d]\n", __func__, prop_id); ippdrv = ipp_find_drv_by_handle(prop_id); - if (IS_ERR_OR_NULL(ippdrv)) { + if (IS_ERR(ippdrv)) { DRM_ERROR("failed to get ipp driver.\n"); return -EINVAL; } @@ -492,7 +492,7 @@ int exynos_drm_ipp_set_property(struct drm_device *drm_dev, void *data, /* find ipp driver using ipp id */ ippdrv = ipp_find_driver(ctx, property); - if (IS_ERR_OR_NULL(ippdrv)) { + if (IS_ERR(ippdrv)) { DRM_ERROR("failed to get ipp driver.\n"); return -EINVAL; } @@ -521,19 +521,19 @@ int exynos_drm_ipp_set_property(struct drm_device *drm_dev, void *data, c_node->state = IPP_STATE_IDLE; c_node->start_work = ipp_create_cmd_work(); - if (IS_ERR_OR_NULL(c_node->start_work)) { + if (IS_ERR(c_node->start_work)) { DRM_ERROR("failed to create start work.\n"); goto err_clear; } c_node->stop_work = ipp_create_cmd_work(); - if (IS_ERR_OR_NULL(c_node->stop_work)) { + if (IS_ERR(c_node->stop_work)) { DRM_ERROR("failed to create stop work.\n"); goto err_free_start; } c_node->event_work = ipp_create_event_work(); - if (IS_ERR_OR_NULL(c_node->event_work)) { + if (IS_ERR(c_node->event_work)) { DRM_ERROR("failed to create event work.\n"); goto err_free_stop; } @@ -915,7 +915,7 @@ static int ipp_queue_buf_with_run(struct device *dev, DRM_DEBUG_KMS("%s\n", __func__); ippdrv = ipp_find_drv_by_handle(qbuf->prop_id); - if (IS_ERR_OR_NULL(ippdrv)) { + if (IS_ERR(ippdrv)) { DRM_ERROR("failed to get ipp driver.\n"); return -EFAULT; } -- cgit v0.10.2 From 4c1d8def9d5bbd642782893ccd849963f1811ae6 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 20 May 2013 19:32:06 +0200 Subject: drm/exynos: exynos_hdmi: Pass correct pointer to free_irq() free_irq() expects the same pointer that was passed to request_threaded_irq(), otherwise the IRQ is not freed. The issue was found using the following coccinelle script: @r1@ type T; T devid; @@ request_threaded_irq(..., devid) @r2@ type r1.T; T devid; position p; @@ free_irq@p(..., devid) @@ position p != r2.p; @@ *free_irq@p(...) Signed-off-by: Lars-Peter Clausen Acked-by: Seung-Woo Kim Signed-off-by: Inki Dae diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index bbfc384..7e99853 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -2082,7 +2082,7 @@ static int hdmi_remove(struct platform_device *pdev) pm_runtime_disable(dev); - free_irq(hdata->irq, hdata); + free_irq(hdata->irq, ctx); /* hdmiphy i2c driver */ -- cgit v0.10.2 From 94d019b87859bb984bd6c15db330d404eab3acaa Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 8 Oct 2012 14:50:44 -0500 Subject: drm/exynos: page flip fixes The event wouldn't be on any list at this point, so nothing to delete it from. Signed-off-by: Rob Clark Signed-off-by: Inki Dae diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c index e8894bc..02b3608 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c @@ -217,7 +217,6 @@ static int exynos_drm_crtc_page_flip(struct drm_crtc *crtc, ret = drm_vblank_get(dev, exynos_crtc->pipe); if (ret) { DRM_DEBUG("failed to acquire vblank counter\n"); - list_del(&event->base.link); goto out; } -- cgit v0.10.2 From 5f10428e4a6d99cc019270c51ad5a33fb38addeb Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 16 May 2013 12:14:59 +0900 Subject: ARM: shmobile: marzen: Use error values in usb_power_* This patch updates the marzen board code as if USB PHY isn't enabled they phy will have a value set by ERR_PTR() rather than be NULL. Without this patch a NULL pointer dereference and kernel panic occurs on initialisation of USB on marzen. This resolves a regression introduced in 3.10-rc1 by b7fa5c2aec5be083eb2719b405089703608e9bc6 ("usb: phy: return -ENXIO when PHY layer isn't enabled"). Tested-by: Nguyen Hong Ky Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index 9105285..b9594e9 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -212,8 +212,8 @@ static struct platform_device *marzen_devices[] __initdata = { static struct usb_phy *phy; static int usb_power_on(struct platform_device *pdev) { - if (!phy) - return -EIO; + if (IS_ERR(phy)) + return PTR_ERR(phy); pm_runtime_enable(&pdev->dev); pm_runtime_get_sync(&pdev->dev); @@ -225,7 +225,7 @@ static int usb_power_on(struct platform_device *pdev) static void usb_power_off(struct platform_device *pdev) { - if (!phy) + if (IS_ERR(phy)) return; usb_phy_shutdown(phy); -- cgit v0.10.2 From e3de42b68478a8c95dd27520e9adead2af9477a5 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Fri, 3 May 2013 19:44:07 +0200 Subject: drm/i915: force full modeset if the connector is in DPMS OFF mode Currently the driver's assumed behavior for a modeset with an attached FB is that the corresponding connector will be switched to DPMS ON mode if it happened to be in DPMS OFF (or another power save mode). This wasn't enforced though if only the FB changed, everything else (format, connector etc.) remaining the same. In this case we only set the new FB base and left the connector in the old power save mode. Fix this by forcing a full modeset whenever there is an attached FB and any affected connector is in a power save mode. V_2: Run the test for encoders in power save mode outside the the test for fb change: user space may have just disabled the encoders but left everything else in place. Make sure the connector list is not empty before running this test. Signed-off-by: Imre Deak Signed-off-by: Egbert Eich Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61642 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59834 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59339 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64178 Acked-by: Jesse Barnes [danvet: Apply Jani's s/connector_off/is_crtc_connector_off bikeshed.] Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 300942a..ad1117b 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8140,6 +8140,21 @@ static void intel_set_config_restore_state(struct drm_device *dev, } } +static bool +is_crtc_connector_off(struct drm_crtc *crtc, struct drm_connector *connectors, + int num_connectors) +{ + int i; + + for (i = 0; i < num_connectors; i++) + if (connectors[i].encoder && + connectors[i].encoder->crtc == crtc && + connectors[i].dpms != DRM_MODE_DPMS_ON) + return true; + + return false; +} + static void intel_set_config_compute_mode_changes(struct drm_mode_set *set, struct intel_set_config *config) @@ -8147,7 +8162,11 @@ intel_set_config_compute_mode_changes(struct drm_mode_set *set, /* We should be able to check here if the fb has the same properties * and then just flip_or_move it */ - if (set->crtc->fb != set->fb) { + if (set->connectors != NULL && + is_crtc_connector_off(set->crtc, *set->connectors, + set->num_connectors)) { + config->mode_changed = true; + } else if (set->crtc->fb != set->fb) { /* If we have no fb then treat it as a full mode set */ if (set->crtc->fb == NULL) { DRM_DEBUG_KMS("crtc has no fb, full mode set\n"); @@ -8157,8 +8176,9 @@ intel_set_config_compute_mode_changes(struct drm_mode_set *set, } else if (set->fb->pixel_format != set->crtc->fb->pixel_format) { config->mode_changed = true; - } else + } else { config->fb_changed = true; + } } if (set->fb && (set->x != set->crtc->x || set->y != set->crtc->y)) -- cgit v0.10.2 From abd9a0c36028771a8f397f38bf79bfcf404f957f Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Fri, 17 May 2013 16:37:59 +0200 Subject: s390/dma: do not call debug_dma after free In dma_free_coherent call debug_dma_free_coherent before deallocating the memory to avoid a possible use after free. Reviewed-by: Gerald Schaefer Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/asm/dma-mapping.h b/arch/s390/include/asm/dma-mapping.h index 9411db65..886ac7d 100644 --- a/arch/s390/include/asm/dma-mapping.h +++ b/arch/s390/include/asm/dma-mapping.h @@ -71,8 +71,8 @@ static inline void dma_free_coherent(struct device *dev, size_t size, { struct dma_map_ops *dma_ops = get_dma_ops(dev); - dma_ops->free(dev, size, cpu_addr, dma_handle, NULL); debug_dma_free_coherent(dev, size, cpu_addr, dma_handle); + dma_ops->free(dev, size, cpu_addr, dma_handle, NULL); } #endif /* _ASM_S390_DMA_MAPPING_H */ -- cgit v0.10.2 From 576ebd74928fd60ae112b33c42b89602015fadbd Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Tue, 21 May 2013 16:08:22 +0200 Subject: kernel: Fix s390 absolute memory access for /dev/mem On s390 the prefix page and absolute zero pages are not correctly returned when reading /dev/mem. The reason is that the s390 asm/io.h file includes the asm-generic/io.h file which then defines xlate_dev_mem_ptr() and therefore overwrites the s390 specific version that does the correct swap operation for prefix and absolute zero pages. The problem is a regression that was introduced with git commit cd248341 (s390/pci: base support). To fix the problem add "#ifndef xlate_dev_mem_ptr" in asm-generic/io.h and "#define xlate_dev_mem_ptr" in asm/io.h. This ensures that the s390 version is used. For completeness also add the "#ifndef" construct for xlate_dev_kmem_ptr(). Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/asm/io.h b/arch/s390/include/asm/io.h index 379d96e..fd9be01 100644 --- a/arch/s390/include/asm/io.h +++ b/arch/s390/include/asm/io.h @@ -36,6 +36,7 @@ static inline void * phys_to_virt(unsigned long address) } void *xlate_dev_mem_ptr(unsigned long phys); +#define xlate_dev_mem_ptr xlate_dev_mem_ptr void unxlate_dev_mem_ptr(unsigned long phys, void *addr); /* diff --git a/include/asm-generic/io.h b/include/asm-generic/io.h index ac9da00..d5afe96 100644 --- a/include/asm-generic/io.h +++ b/include/asm-generic/io.h @@ -343,8 +343,12 @@ extern void ioport_unmap(void __iomem *p); #endif /* CONFIG_GENERIC_IOMAP */ #endif /* CONFIG_HAS_IOPORT */ +#ifndef xlate_dev_kmem_ptr #define xlate_dev_kmem_ptr(p) p +#endif +#ifndef xlate_dev_mem_ptr #define xlate_dev_mem_ptr(p) __va(p) +#endif #ifdef CONFIG_VIRT_TO_BUS #ifndef virt_to_bus -- cgit v0.10.2 From ba86e4dda700b3e696119c7f4fad945b90cf5c84 Mon Sep 17 00:00:00 2001 From: Sanjay Lal Date: Sat, 18 May 2013 06:54:23 -0700 Subject: KVM/MIPS32: Move include/asm/kvm.h => include/uapi/asm/kvm.h since it is a user visible API. Signed-off-by: Sanjay Lal Signed-off-by: Gleb Natapov diff --git a/arch/mips/include/asm/kvm.h b/arch/mips/include/asm/kvm.h deleted file mode 100644 index 85789ea..0000000 --- a/arch/mips/include/asm/kvm.h +++ /dev/null @@ -1,55 +0,0 @@ -/* -* This file is subject to the terms and conditions of the GNU General Public -* License. See the file "COPYING" in the main directory of this archive -* for more details. -* -* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. -* Authors: Sanjay Lal -*/ - -#ifndef __LINUX_KVM_MIPS_H -#define __LINUX_KVM_MIPS_H - -#include - -#define __KVM_MIPS - -#define N_MIPS_COPROC_REGS 32 -#define N_MIPS_COPROC_SEL 8 - -/* for KVM_GET_REGS and KVM_SET_REGS */ -struct kvm_regs { - __u32 gprs[32]; - __u32 hi; - __u32 lo; - __u32 pc; - - __u32 cp0reg[N_MIPS_COPROC_REGS][N_MIPS_COPROC_SEL]; -}; - -/* for KVM_GET_SREGS and KVM_SET_SREGS */ -struct kvm_sregs { -}; - -/* for KVM_GET_FPU and KVM_SET_FPU */ -struct kvm_fpu { -}; - -struct kvm_debug_exit_arch { -}; - -/* for KVM_SET_GUEST_DEBUG */ -struct kvm_guest_debug_arch { -}; - -struct kvm_mips_interrupt { - /* in */ - __u32 cpu; - __u32 irq; -}; - -/* definition of registers in kvm_run */ -struct kvm_sync_regs { -}; - -#endif /* __LINUX_KVM_MIPS_H */ diff --git a/arch/mips/include/uapi/asm/kvm.h b/arch/mips/include/uapi/asm/kvm.h new file mode 100644 index 0000000..85789ea --- /dev/null +++ b/arch/mips/include/uapi/asm/kvm.h @@ -0,0 +1,55 @@ +/* +* This file is subject to the terms and conditions of the GNU General Public +* License. See the file "COPYING" in the main directory of this archive +* for more details. +* +* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. +* Authors: Sanjay Lal +*/ + +#ifndef __LINUX_KVM_MIPS_H +#define __LINUX_KVM_MIPS_H + +#include + +#define __KVM_MIPS + +#define N_MIPS_COPROC_REGS 32 +#define N_MIPS_COPROC_SEL 8 + +/* for KVM_GET_REGS and KVM_SET_REGS */ +struct kvm_regs { + __u32 gprs[32]; + __u32 hi; + __u32 lo; + __u32 pc; + + __u32 cp0reg[N_MIPS_COPROC_REGS][N_MIPS_COPROC_SEL]; +}; + +/* for KVM_GET_SREGS and KVM_SET_SREGS */ +struct kvm_sregs { +}; + +/* for KVM_GET_FPU and KVM_SET_FPU */ +struct kvm_fpu { +}; + +struct kvm_debug_exit_arch { +}; + +/* for KVM_SET_GUEST_DEBUG */ +struct kvm_guest_debug_arch { +}; + +struct kvm_mips_interrupt { + /* in */ + __u32 cpu; + __u32 irq; +}; + +/* definition of registers in kvm_run */ +struct kvm_sync_regs { +}; + +#endif /* __LINUX_KVM_MIPS_H */ -- cgit v0.10.2 From 6d17c0d1e8a66f5508082cb0fecb8afb7e9a21e4 Mon Sep 17 00:00:00 2001 From: Sanjay Lal Date: Sat, 18 May 2013 06:54:24 -0700 Subject: KVM/MIPS32: Wrap calls to gfn_to_pfn() with srcu_read_lock/unlock() - As suggested by Gleb, wrap calls to gfn_to_pfn() with srcu_read_lock/unlock(). Memory slots should be acccessed from a SRCU read section. - kvm_mips_map_page() now returns an error code to it's callers, instead of calling panic() if it cannot find a mapping for a particular gfn. Signed-off-by: Sanjay Lal Signed-off-by: Gleb Natapov diff --git a/arch/mips/kvm/kvm_tlb.c b/arch/mips/kvm/kvm_tlb.c index 89511a9..87d845e 100644 --- a/arch/mips/kvm/kvm_tlb.c +++ b/arch/mips/kvm/kvm_tlb.c @@ -17,6 +17,8 @@ #include #include #include +#include + #include #include @@ -169,21 +171,27 @@ void kvm_mips_dump_shadow_tlbs(struct kvm_vcpu *vcpu) } } -static void kvm_mips_map_page(struct kvm *kvm, gfn_t gfn) +static int kvm_mips_map_page(struct kvm *kvm, gfn_t gfn) { + int srcu_idx, err = 0; pfn_t pfn; if (kvm->arch.guest_pmap[gfn] != KVM_INVALID_PAGE) - return; + return 0; + srcu_idx = srcu_read_lock(&kvm->srcu); pfn = kvm_mips_gfn_to_pfn(kvm, gfn); if (kvm_mips_is_error_pfn(pfn)) { - panic("Couldn't get pfn for gfn %#" PRIx64 "!\n", gfn); + kvm_err("Couldn't get pfn for gfn %#" PRIx64 "!\n", gfn); + err = -EFAULT; + goto out; } kvm->arch.guest_pmap[gfn] = pfn; - return; +out: + srcu_read_unlock(&kvm->srcu, srcu_idx); + return err; } /* Translate guest KSEG0 addresses to Host PA */ @@ -207,7 +215,10 @@ unsigned long kvm_mips_translate_guest_kseg0_to_hpa(struct kvm_vcpu *vcpu, gva); return KVM_INVALID_PAGE; } - kvm_mips_map_page(vcpu->kvm, gfn); + + if (kvm_mips_map_page(vcpu->kvm, gfn) < 0) + return KVM_INVALID_ADDR; + return (kvm->arch.guest_pmap[gfn] << PAGE_SHIFT) + offset; } @@ -310,8 +321,11 @@ int kvm_mips_handle_kseg0_tlb_fault(unsigned long badvaddr, even = !(gfn & 0x1); vaddr = badvaddr & (PAGE_MASK << 1); - kvm_mips_map_page(vcpu->kvm, gfn); - kvm_mips_map_page(vcpu->kvm, gfn ^ 0x1); + if (kvm_mips_map_page(vcpu->kvm, gfn) < 0) + return -1; + + if (kvm_mips_map_page(vcpu->kvm, gfn ^ 0x1) < 0) + return -1; if (even) { pfn0 = kvm->arch.guest_pmap[gfn]; @@ -389,8 +403,11 @@ kvm_mips_handle_mapped_seg_tlb_fault(struct kvm_vcpu *vcpu, pfn0 = 0; pfn1 = 0; } else { - kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb->tlb_lo0) >> PAGE_SHIFT); - kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb->tlb_lo1) >> PAGE_SHIFT); + if (kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb->tlb_lo0) >> PAGE_SHIFT) < 0) + return -1; + + if (kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb->tlb_lo1) >> PAGE_SHIFT) < 0) + return -1; pfn0 = kvm->arch.guest_pmap[mips3_tlbpfn_to_paddr(tlb->tlb_lo0) >> PAGE_SHIFT]; pfn1 = kvm->arch.guest_pmap[mips3_tlbpfn_to_paddr(tlb->tlb_lo1) >> PAGE_SHIFT]; -- cgit v0.10.2 From b5f14720a6421aab841d9f03f0129cfbe7db5133 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Bilski?= Date: Sun, 19 May 2013 19:27:55 +0000 Subject: cpufreq / e_powersaver: Fix linker error when ACPI processor is a module on i386: CONFIG_ACPI_PROCESSOR=m CONFIG_X86_E_POWERSAVER=y drivers/built-in.o: In function `eps_cpu_init.part.8': e_powersaver.c:(.text.unlikely+0x2243): undefined reference to `acpi_processor_register_performance' e_powersaver.c:(.text.unlikely+0x22a2): undefined reference to `acpi_processor_unregister_performance' e_powersaver.c:(.text.unlikely+0x246b): undefined reference to `acpi_processor_get_bios_limit' X86_E_POWERSAVER should also depend on ACPI_PROCESSOR. Signed-off-by: Rafal Bilski Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86 index 2b8a8c3..6bd63d6 100644 --- a/drivers/cpufreq/Kconfig.x86 +++ b/drivers/cpufreq/Kconfig.x86 @@ -272,7 +272,7 @@ config X86_LONGHAUL config X86_E_POWERSAVER tristate "VIA C7 Enhanced PowerSaver (DANGEROUS)" select CPU_FREQ_TABLE - depends on X86_32 + depends on X86_32 && ACPI_PROCESSOR help This adds the CPUFreq driver for VIA C7 processors. However, this driver does not have any safeguards to prevent operating the CPU out of spec -- cgit v0.10.2 From 92a9b5c291c72aa9899021699458f0b6e328b940 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 17 May 2013 11:25:11 +0000 Subject: cpufreq: arm_big_little_dt: Register driver only if DT has valid data If arm_big_little_dt driver is enabled, then it will always try to register with big LITTLE cpufreq core driver. In case DT doesn't have relevant data for cpu nodes, i.e. operating points aren't present, then we should exit early and shouldn't register with big LITTLE cpufreq core driver. Otherwise we will fail continuously from the driver->init() routine. This patch fixes this issue. Reported-and-tested-by: Jon Medhurst Reviewed-by: Jon Medhurst Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/arm_big_little_dt.c b/drivers/cpufreq/arm_big_little_dt.c index 173ed05..27e2f45 100644 --- a/drivers/cpufreq/arm_big_little_dt.c +++ b/drivers/cpufreq/arm_big_little_dt.c @@ -19,6 +19,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include #include #include #include @@ -29,60 +30,63 @@ #include #include "arm_big_little.h" -static int dt_init_opp_table(struct device *cpu_dev) +/* get cpu node with valid operating-points */ +static struct device_node *get_cpu_node_with_valid_op(int cpu) { - struct device_node *np, *parent; - int count = 0, ret; + struct device_node *np = NULL, *parent; + int count = 0; parent = of_find_node_by_path("/cpus"); if (!parent) { pr_err("failed to find OF /cpus\n"); - return -ENOENT; + return NULL; } for_each_child_of_node(parent, np) { - if (count++ != cpu_dev->id) + if (count++ != cpu) continue; if (!of_get_property(np, "operating-points", NULL)) { - ret = -ENODATA; - } else { - cpu_dev->of_node = np; - ret = of_init_opp_table(cpu_dev); + of_node_put(np); + np = NULL; } - of_node_put(np); - of_node_put(parent); - return ret; + break; } - return -ENODEV; + of_node_put(parent); + return np; +} + +static int dt_init_opp_table(struct device *cpu_dev) +{ + struct device_node *np; + int ret; + + np = get_cpu_node_with_valid_op(cpu_dev->id); + if (!np) + return -ENODATA; + + cpu_dev->of_node = np; + ret = of_init_opp_table(cpu_dev); + of_node_put(np); + + return ret; } static int dt_get_transition_latency(struct device *cpu_dev) { - struct device_node *np, *parent; + struct device_node *np; u32 transition_latency = CPUFREQ_ETERNAL; - int count = 0; - parent = of_find_node_by_path("/cpus"); - if (!parent) { - pr_info("Failed to find OF /cpus. Use CPUFREQ_ETERNAL transition latency\n"); + np = get_cpu_node_with_valid_op(cpu_dev->id); + if (!np) return CPUFREQ_ETERNAL; - } - - for_each_child_of_node(parent, np) { - if (count++ != cpu_dev->id) - continue; - - of_property_read_u32(np, "clock-latency", &transition_latency); - of_node_put(np); - of_node_put(parent); - return transition_latency; - } + of_property_read_u32(np, "clock-latency", &transition_latency); + of_node_put(np); - pr_info("clock-latency isn't found, use CPUFREQ_ETERNAL transition latency\n"); - return CPUFREQ_ETERNAL; + pr_debug("%s: clock-latency: %d\n", __func__, transition_latency); + return transition_latency; } static struct cpufreq_arm_bL_ops dt_bL_ops = { @@ -93,6 +97,13 @@ static struct cpufreq_arm_bL_ops dt_bL_ops = { static int generic_bL_init(void) { + struct device_node *np; + + np = get_cpu_node_with_valid_op(0); + if (!np) + return -ENODEV; + + of_node_put(np); return bL_cpufreq_register(&dt_bL_ops); } module_init(generic_bL_init); -- cgit v0.10.2 From 9076eaca60b3796b3b97d1914c4924c4bc39f066 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 20 May 2013 09:57:17 +0530 Subject: cpufreq: arm_big_little_dt: Instantiate as platform_driver As multiplatform build is being adopted by more and more ARM platforms, initcall function should be used very carefully. For example, when both arm_big_little_dt and cpufreq-cpu0 drivers are compiled in, arm_big_little_dt driver may try to register even if we had platform device for cpufreq-cpu0 registered. To eliminate this undesired the effect, the patch changes arm_big_little_dt driver to have it instantiated as a platform_driver. Then it will only run on platforms that create the platform_device "arm-bL-cpufreq-dt". Reported-and-tested-by: Rob Herring Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/arm_big_little_dt.c b/drivers/cpufreq/arm_big_little_dt.c index 27e2f45..fd9e3ea 100644 --- a/drivers/cpufreq/arm_big_little_dt.c +++ b/drivers/cpufreq/arm_big_little_dt.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include "arm_big_little.h" @@ -95,7 +96,7 @@ static struct cpufreq_arm_bL_ops dt_bL_ops = { .init_opp_table = dt_init_opp_table, }; -static int generic_bL_init(void) +static int generic_bL_probe(struct platform_device *pdev) { struct device_node *np; @@ -106,13 +107,22 @@ static int generic_bL_init(void) of_node_put(np); return bL_cpufreq_register(&dt_bL_ops); } -module_init(generic_bL_init); -static void generic_bL_exit(void) +static int generic_bL_remove(struct platform_device *pdev) { - return bL_cpufreq_unregister(&dt_bL_ops); + bL_cpufreq_unregister(&dt_bL_ops); + return 0; } -module_exit(generic_bL_exit); + +static struct platform_driver generic_bL_platdrv = { + .driver = { + .name = "arm-bL-cpufreq-dt", + .owner = THIS_MODULE, + }, + .probe = generic_bL_probe, + .remove = generic_bL_remove, +}; +module_platform_driver(generic_bL_platdrv); MODULE_AUTHOR("Viresh Kumar "); MODULE_DESCRIPTION("Generic ARM big LITTLE cpufreq driver via DT"); -- cgit v0.10.2 From 22047b85170280b0ca59ce4befd0fa1f71a4ec16 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Wed, 22 May 2013 08:34:13 +0000 Subject: kprobes/mips: Fix to check double free of insn slot Fix to check double free of insn_slot at arch_remove_kprobe as other arches do. Signed-off-by: Masami Hiramatsu Cc: David Daney Cc: Maneesh Soni Cc: Victor Kamensky Cc: linux-mips@linux-mips.org Cc: Ingo Molnar Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: yrl.pp-manager.tt@hitachi.com Cc: systemtap@sourceware.org Patchwork: https://patchwork.linux-mips.org/patch/5293/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/kprobes.c b/arch/mips/kernel/kprobes.c index 12bc4eb..1f8187a 100644 --- a/arch/mips/kernel/kprobes.c +++ b/arch/mips/kernel/kprobes.c @@ -207,7 +207,10 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p) void __kprobes arch_remove_kprobe(struct kprobe *p) { - free_insn_slot(p->ainsn.insn, 0); + if (p->ainsn.insn) { + free_insn_slot(p->ainsn.insn, 0); + p->ainsn.insn = NULL; + } } static void save_previous_kprobe(struct kprobe_ctlblk *kcb) -- cgit v0.10.2 From df97729f1bcb5055ba414f08b48364d46c6baef0 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 21 May 2013 20:03:17 +0300 Subject: drm/i915: add msecs_to_jiffies_timeout to guarantee minimum duration We need this to avoid premature timeouts whenever scheduling a timeout based on the current jiffies value. For an explanation see [1]. The following patches will take the helper into use. Once the more generic solution proposed in the thread at [1] is accepted this patch can be reverted while keeping the follow-up patches. [1] http://marc.info/?l=linux-kernel&m=136854294730957&w=2 Signed-off-by: Imre Deak Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index d5dcf7f..b9d00dc 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1943,4 +1943,19 @@ static inline void __user *to_user_ptr(u64 address) return (void __user *)(uintptr_t)address; } +static inline unsigned long msecs_to_jiffies_timeout(const unsigned int m) +{ + unsigned long j = msecs_to_jiffies(m); + + return min_t(unsigned long, MAX_JIFFY_OFFSET, j + 1); +} + +static inline unsigned long +timespec_to_jiffies_timeout(const struct timespec *value) +{ + unsigned long j = timespec_to_jiffies(value); + + return min_t(unsigned long, MAX_JIFFY_OFFSET, j + 1); +} + #endif -- cgit v0.10.2 From 2554fc1fa6dc184ca553f73e3796fa59745efa8a Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 21 May 2013 20:03:18 +0300 Subject: drm/i915: use msecs_to_jiffies_timeout instead of open coding the same Signed-off-by: Imre Deak Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index 5d24503..98cd8535 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -228,7 +228,7 @@ gmbus_wait_hw_status(struct drm_i915_private *dev_priv, * need to wake up periodically and check that ourselves. */ I915_WRITE(GMBUS4 + reg_offset, gmbus4_irq_en); - for (i = 0; i < msecs_to_jiffies(50) + 1; i++) { + for (i = 0; i < msecs_to_jiffies_timeout(50); i++) { prepare_to_wait(&dev_priv->gmbus_wait_queue, &wait, TASK_UNINTERRUPTIBLE); -- cgit v0.10.2 From e054cc3937a4a58e77870d4c922a7b21824b610a Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 21 May 2013 20:03:19 +0300 Subject: drm/i915: avoid premature timeouts in __wait_seqno() At the moment wait_event_timeout/wait_event_interruptible_timeout may time out 1 jiffy too early, as the calculated expiry time is 1 less than needed. Besides timing out too early this also means that the calculation of the remaining time will be incorrect and we will pass a non-zero remaining time to user space in case of a time out. This is one reason for the following bugzilla report: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64270 Signed-off-by: Imre Deak Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 6165535..a6cf8e8 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1003,7 +1003,7 @@ static int __wait_seqno(struct intel_ring_buffer *ring, u32 seqno, wait_forever = false; } - timeout_jiffies = timespec_to_jiffies(&wait_time); + timeout_jiffies = timespec_to_jiffies_timeout(&wait_time); if (WARN_ON(!ring->irq_get(ring))) return -ENODEV; -- cgit v0.10.2 From 3598706b52cb45ba0a9e8aa99ce5ac59140f2b8b Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 21 May 2013 20:03:20 +0300 Subject: drm/i915: avoid premature DP AUX timeouts During DP AUX communication we might time out 1 jiffy too early, because the calculated expiry jiffy value is one less than needed. This is only one reason for false DP AUX timeouts. For a complete solution we also need the following fix, which is now queued for mainline: http://marc.info/?l=linux-kernel&m=136748515710837&w=2 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64133 Signed-off-by: Imre Deak Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 3d704b7..70789b1 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -303,7 +303,7 @@ intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq) #define C (((status = I915_READ_NOTRACE(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0) if (has_aux_irq) done = wait_event_timeout(dev_priv->gmbus_wait_queue, C, - msecs_to_jiffies(10)); + msecs_to_jiffies_timeout(10)); else done = wait_for_atomic(C, 10) == 0; if (!done) diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index 98cd8535..639fe19 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -263,7 +263,8 @@ gmbus_wait_idle(struct drm_i915_private *dev_priv) /* Important: The hw handles only the first bit, so set only one! */ I915_WRITE(GMBUS4 + reg_offset, GMBUS_IDLE_EN); - ret = wait_event_timeout(dev_priv->gmbus_wait_queue, C, 10); + ret = wait_event_timeout(dev_priv->gmbus_wait_queue, C, + msecs_to_jiffies_timeout(10)); I915_WRITE(GMBUS4 + reg_offset, 0); -- cgit v0.10.2 From dec33abaafc89bcbd78f85fad0513170415a26d5 Mon Sep 17 00:00:00 2001 From: Aron Xu Date: Tue, 21 May 2013 13:37:06 +0000 Subject: MIPS: N64: Wire getdents64(2) As a relatively new ABI, N64 only had getdents syscall while other modern architectures have getdents64. This was noticed when Python 3.3 shifted to the latter one for aarch64. [ralf@linux-mips.org: The history of getdents64 is a little complicated. Commit 1a1d77dd589de5a567fa95e36aa6999c704ceca4 [Merge with 2.4.0-test7.] added N64 getdents(2) to arch/mips64/kernel/scall_64.S as syscall 5213, then dropped again in 578720675c44e54e8aa7c68f6dce59ed37ce3d3b [Overhaul of the 64-bit syscall interface. Now heritage free.] for 2.5.18 in 2002.] Signed-off-by: Aron Xu Acked-by: David Daney Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5285/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/uapi/asm/unistd.h b/arch/mips/include/uapi/asm/unistd.h index 16338b8..1dee279 100644 --- a/arch/mips/include/uapi/asm/unistd.h +++ b/arch/mips/include/uapi/asm/unistd.h @@ -694,16 +694,17 @@ #define __NR_process_vm_writev (__NR_Linux + 305) #define __NR_kcmp (__NR_Linux + 306) #define __NR_finit_module (__NR_Linux + 307) +#define __NR_getdents64 (__NR_Linux + 308) /* * Offset of the last Linux 64-bit flavoured syscall */ -#define __NR_Linux_syscalls 307 +#define __NR_Linux_syscalls 308 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ #define __NR_64_Linux 5000 -#define __NR_64_Linux_syscalls 307 +#define __NR_64_Linux_syscalls 308 #if _MIPS_SIM == _MIPS_SIM_NABI32 diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index 36cfd40..97a5909 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -423,4 +423,5 @@ sys_call_table: PTR sys_process_vm_writev /* 5305 */ PTR sys_kcmp PTR sys_finit_module + PTR sys_getdents64 .size sys_call_table,.-sys_call_table -- cgit v0.10.2 From bb3ec6b08396bbd631b6441102dd1c3d89cbc576 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 22 May 2013 12:18:47 +0200 Subject: mm: Fix virt_to_page() warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit virt_to_page() is typically implemented as a macro containing a cast so that it will accept both pointers and unsigned long without causing a warning. But MIPS virt_to_page() uses virt_to_phys which is a function so passing an unsigned long will cause a warning: CC mm/page_alloc.o mm/page_alloc.c: In function ‘free_reserved_area’: mm/page_alloc.c:5161:3: warning: passing argument 1 of ‘virt_to_phys’ makes pointer from integer without a cast [enabled by default] arch/mips/include/asm/io.h:119:100: note: expected ‘const volatile void *’ but argument is of type ‘long unsigned int’ All others users of virt_to_page() in mm/ are passing a void *. Signed-off-by: Ralf Baechle Reported-by: Eunbong Song Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-mips@linux-mips.org Signed-off-by: Linus Torvalds diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 98cbdf6..378a15b 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -5158,7 +5158,7 @@ unsigned long free_reserved_area(unsigned long start, unsigned long end, for (pages = 0; pos < end; pos += PAGE_SIZE, pages++) { if (poison) memset((void *)pos, poison, PAGE_SIZE); - free_reserved_page(virt_to_page(pos)); + free_reserved_page(virt_to_page((void *)pos)); } if (pages && s) -- cgit v0.10.2 From bac902d505220544824829affcf9c1b17b57b8ca Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 22 May 2013 10:55:41 +0800 Subject: spi: topcliff-pch: fix error return code in pch_spi_probe() Fix to return -ENOMEM in the platform_device_alloc() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c index 963e0f3..637d728 100644 --- a/drivers/spi/spi-topcliff-pch.c +++ b/drivers/spi/spi-topcliff-pch.c @@ -1667,6 +1667,7 @@ static int pch_spi_probe(struct pci_dev *pdev, pd_dev = platform_device_alloc("pch-spi", i); if (!pd_dev) { dev_err(&pdev->dev, "platform_device_alloc failed\n"); + retval = -ENOMEM; goto err_platform_device; } pd_dev_save->pd_save[i] = pd_dev; -- cgit v0.10.2 From e037f95ffb5355ffe295e1d106d02fefd284d882 Mon Sep 17 00:00:00 2001 From: "Matwey V. Kornilov" Date: Wed, 22 May 2013 11:13:38 +0400 Subject: tty: mxser: Fix build warning introduced by dfc7b837c7f9 (Re: linux-next: build warning after merge of the tty.current tree) Fix build warning at mxser.c introduced by dfc7b837c7f9 (tty: mxser: fix usage of opmode_ioaddr) Signed-off-by: Matwey V. Kornilov Reported-by: kbuild test robot Reported-by: Stephen Rothwell Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c index f97b196..4c4a236 100644 --- a/drivers/tty/mxser.c +++ b/drivers/tty/mxser.c @@ -1674,15 +1674,15 @@ static int mxser_ioctl(struct tty_struct *tty, return mxser_ioctl_special(cmd, argp); if (cmd == MOXA_SET_OP_MODE || cmd == MOXA_GET_OP_MODE) { - if (info->board->chip_flag != MOXA_MUST_MU860_HWID) - return -EFAULT; - int p; unsigned long opmode; static unsigned char ModeMask[] = { 0xfc, 0xf3, 0xcf, 0x3f }; int shiftbit; unsigned char val, mask; + if (info->board->chip_flag != MOXA_MUST_MU860_HWID) + return -EFAULT; + p = tty->index % 4; if (cmd == MOXA_SET_OP_MODE) { if (get_user(opmode, (int __user *) argp)) -- cgit v0.10.2 From 08c96abd611beadf2af414a306fe0fb02ba706ff Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 18 May 2013 21:28:15 +0200 Subject: ath9k: prevent aggregation session deadlocks Waiting for all subframes of an existing aggregation session to drain before allowing mac80211 to start a new one is fragile and deadlocks caused by this behavior have been observed. Since mac80211 has proper synchronization for aggregation session start/stop handling, a better approach to session handling is to simply allow mac80211 to start a new session at any time. This requires changing the code to discard any packets outside of the BlockAck window in the A-MPDU software retry code. This patch implements the above and also simplifies the code. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 366002f..42b03dc 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -251,10 +251,9 @@ struct ath_atx_tid { int tidno; int baw_head; /* first un-acked tx buffer */ int baw_tail; /* next unused tx buffer slot */ - int sched; - int paused; - u8 state; - bool stop_cb; + bool sched; + bool paused; + bool active; }; struct ath_node { @@ -275,10 +274,6 @@ struct ath_node { #endif }; -#define AGGR_CLEANUP BIT(1) -#define AGGR_ADDBA_COMPLETE BIT(2) -#define AGGR_ADDBA_PROGRESS BIT(3) - struct ath_tx_control { struct ath_txq *txq; struct ath_node *an; @@ -352,8 +347,7 @@ void ath_tx_tasklet(struct ath_softc *sc); void ath_tx_edma_tasklet(struct ath_softc *sc); int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid, u16 *ssn); -bool ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid, - bool flush); +void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid); void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid); void ath_tx_aggr_wakeup(struct ath_softc *sc, struct ath_node *an); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 2382d12..5092eca 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1709,7 +1709,8 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw, flush = true; case IEEE80211_AMPDU_TX_STOP_CONT: ath9k_ps_wakeup(sc); - if (ath_tx_aggr_stop(sc, sta, tid, flush)) + ath_tx_aggr_stop(sc, sta, tid); + if (!flush) ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); ath9k_ps_restore(sc); break; diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index aa4d368..7eb1f4b 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -1227,10 +1227,7 @@ static bool ath_tx_aggr_check(struct ath_softc *sc, struct ieee80211_sta *sta, return false; txtid = ATH_AN_2_TID(an, tidno); - - if (!(txtid->state & (AGGR_ADDBA_COMPLETE | AGGR_ADDBA_PROGRESS))) - return true; - return false; + return !txtid->active; } diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 14bb335..1c9b1ba 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -125,24 +125,6 @@ static void ath_tx_queue_tid(struct ath_txq *txq, struct ath_atx_tid *tid) list_add_tail(&ac->list, &txq->axq_acq); } -static void ath_tx_resume_tid(struct ath_softc *sc, struct ath_atx_tid *tid) -{ - struct ath_txq *txq = tid->ac->txq; - - WARN_ON(!tid->paused); - - ath_txq_lock(sc, txq); - tid->paused = false; - - if (skb_queue_empty(&tid->buf_q)) - goto unlock; - - ath_tx_queue_tid(txq, tid); - ath_txq_schedule(sc, txq); -unlock: - ath_txq_unlock_complete(sc, txq); -} - static struct ath_frame_info *get_frame_info(struct sk_buff *skb) { struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); @@ -164,20 +146,7 @@ static void ath_set_rates(struct ieee80211_vif *vif, struct ieee80211_sta *sta, ARRAY_SIZE(bf->rates)); } -static void ath_tx_clear_tid(struct ath_softc *sc, struct ath_atx_tid *tid) -{ - tid->state &= ~AGGR_ADDBA_COMPLETE; - tid->state &= ~AGGR_CLEANUP; - if (!tid->stop_cb) - return; - - ieee80211_start_tx_ba_cb_irqsafe(tid->an->vif, tid->an->sta->addr, - tid->tidno); - tid->stop_cb = false; -} - -static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid, - bool flush_packets) +static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid) { struct ath_txq *txq = tid->ac->txq; struct sk_buff *skb; @@ -194,15 +163,16 @@ static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid, while ((skb = __skb_dequeue(&tid->buf_q))) { fi = get_frame_info(skb); bf = fi->bf; - if (!bf && !flush_packets) - bf = ath_tx_setup_buffer(sc, txq, tid, skb); if (!bf) { - ieee80211_free_txskb(sc->hw, skb); - continue; + bf = ath_tx_setup_buffer(sc, txq, tid, skb); + if (!bf) { + ieee80211_free_txskb(sc->hw, skb); + continue; + } } - if (fi->retries || flush_packets) { + if (fi->retries) { list_add_tail(&bf->list, &bf_head); ath_tx_update_baw(sc, tid, bf->bf_state.seqno); ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0); @@ -213,10 +183,7 @@ static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid, } } - if (tid->baw_head == tid->baw_tail) - ath_tx_clear_tid(sc, tid); - - if (sendbar && !flush_packets) { + if (sendbar) { ath_txq_unlock(sc, txq); ath_send_bar(tid, tid->seq_start); ath_txq_lock(sc, txq); @@ -499,19 +466,19 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, tx_info = IEEE80211_SKB_CB(skb); fi = get_frame_info(skb); - if (ATH_BA_ISSET(ba, ATH_BA_INDEX(seq_st, seqno))) { + if (!BAW_WITHIN(tid->seq_start, tid->baw_size, seqno)) { + /* + * Outside of the current BlockAck window, + * maybe part of a previous session + */ + txfail = 1; + } else if (ATH_BA_ISSET(ba, ATH_BA_INDEX(seq_st, seqno))) { /* transmit completion, subframe is * acked by block ack */ acked_cnt++; } else if (!isaggr && txok) { /* transmit completion */ acked_cnt++; - } else if (tid->state & AGGR_CLEANUP) { - /* - * cleanup in progress, just fail - * the un-acked sub-frames - */ - txfail = 1; } else if (flush) { txpending = 1; } else if (fi->retries < ATH_MAX_SW_RETRIES) { @@ -535,7 +502,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, if (bf_next != NULL || !bf_last->bf_stale) list_move_tail(&bf->list, &bf_head); - if (!txpending || (tid->state & AGGR_CLEANUP)) { + if (!txpending) { /* * complete the acked-ones/xretried ones; update * block-ack window @@ -609,9 +576,6 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, ath_txq_lock(sc, txq); } - if (tid->state & AGGR_CLEANUP) - ath_tx_flush_tid(sc, tid, false); - rcu_read_unlock(); if (needreset) @@ -1244,9 +1208,6 @@ int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta, an = (struct ath_node *)sta->drv_priv; txtid = ATH_AN_2_TID(an, tid); - if (txtid->state & (AGGR_CLEANUP | AGGR_ADDBA_COMPLETE)) - return -EAGAIN; - /* update ampdu factor/density, they may have changed. This may happen * in HT IBSS when a beacon with HT-info is received after the station * has already been added. @@ -1258,7 +1219,7 @@ int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta, an->mpdudensity = density; } - txtid->state |= AGGR_ADDBA_PROGRESS; + txtid->active = true; txtid->paused = true; *ssn = txtid->seq_start = txtid->seq_next; txtid->bar_index = -1; @@ -1269,45 +1230,17 @@ int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta, return 0; } -bool ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid, - bool flush) +void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid) { struct ath_node *an = (struct ath_node *)sta->drv_priv; struct ath_atx_tid *txtid = ATH_AN_2_TID(an, tid); struct ath_txq *txq = txtid->ac->txq; - bool ret = !flush; - - if (flush) - txtid->stop_cb = false; - - if (txtid->state & AGGR_CLEANUP) - return false; - - if (!(txtid->state & AGGR_ADDBA_COMPLETE)) { - txtid->state &= ~AGGR_ADDBA_PROGRESS; - return ret; - } ath_txq_lock(sc, txq); + txtid->active = false; txtid->paused = true; - - /* - * If frames are still being transmitted for this TID, they will be - * cleaned up during tx completion. To prevent race conditions, this - * TID can only be reused after all in-progress subframes have been - * completed. - */ - if (txtid->baw_head != txtid->baw_tail) { - txtid->state |= AGGR_CLEANUP; - ret = false; - txtid->stop_cb = !flush; - } else { - txtid->state &= ~AGGR_ADDBA_COMPLETE; - } - - ath_tx_flush_tid(sc, txtid, flush); + ath_tx_flush_tid(sc, txtid); ath_txq_unlock_complete(sc, txq); - return ret; } void ath_tx_aggr_sleep(struct ieee80211_sta *sta, struct ath_softc *sc, @@ -1371,18 +1304,28 @@ void ath_tx_aggr_wakeup(struct ath_softc *sc, struct ath_node *an) } } -void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid) +void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, + u16 tidno) { - struct ath_atx_tid *txtid; + struct ath_atx_tid *tid; struct ath_node *an; + struct ath_txq *txq; an = (struct ath_node *)sta->drv_priv; + tid = ATH_AN_2_TID(an, tidno); + txq = tid->ac->txq; - txtid = ATH_AN_2_TID(an, tid); - txtid->baw_size = IEEE80211_MIN_AMPDU_BUF << sta->ht_cap.ampdu_factor; - txtid->state |= AGGR_ADDBA_COMPLETE; - txtid->state &= ~AGGR_ADDBA_PROGRESS; - ath_tx_resume_tid(sc, txtid); + ath_txq_lock(sc, txq); + + tid->baw_size = IEEE80211_MIN_AMPDU_BUF << sta->ht_cap.ampdu_factor; + tid->paused = false; + + if (!skb_queue_empty(&tid->buf_q)) { + ath_tx_queue_tid(txq, tid); + ath_txq_schedule(sc, txq); + } + + ath_txq_unlock_complete(sc, txq); } /********************/ @@ -2431,13 +2374,10 @@ void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an) tid->baw_head = tid->baw_tail = 0; tid->sched = false; tid->paused = false; - tid->state &= ~AGGR_CLEANUP; + tid->active = false; __skb_queue_head_init(&tid->buf_q); acno = TID_TO_WME_AC(tidno); tid->ac = &an->ac[acno]; - tid->state &= ~AGGR_ADDBA_COMPLETE; - tid->state &= ~AGGR_ADDBA_PROGRESS; - tid->stop_cb = false; } for (acno = 0, ac = &an->ac[acno]; @@ -2474,7 +2414,7 @@ void ath_tx_node_cleanup(struct ath_softc *sc, struct ath_node *an) } ath_tid_drain(sc, txq, tid); - ath_tx_clear_tid(sc, tid); + tid->active = false; ath_txq_unlock(sc, txq); } -- cgit v0.10.2 From 0b6e81d1658e2aa6b3acc942088c529fee5aa62e Mon Sep 17 00:00:00 2001 From: Nicolas Schichan Date: Wed, 22 May 2013 19:19:25 +0200 Subject: ASoC: cs42l52: microphone bias is controlled by IFACE_CTL2 register. Signed-off-by: Nicolas Schichan Acked-by: Brian Austin Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/cs42l52.c b/sound/soc/codecs/cs42l52.c index 0f6f481..1a17c85 100644 --- a/sound/soc/codecs/cs42l52.c +++ b/sound/soc/codecs/cs42l52.c @@ -225,7 +225,7 @@ static const char * const mic_bias_level_text[] = { }; static const struct soc_enum mic_bias_level_enum = - SOC_ENUM_SINGLE(CS42L52_IFACE_CTL1, 0, + SOC_ENUM_SINGLE(CS42L52_IFACE_CTL2, 0, ARRAY_SIZE(mic_bias_level_text), mic_bias_level_text); static const char * const cs42l52_mic_text[] = { "Single", "Differential" }; -- cgit v0.10.2 From 99674c721fd9393030365b66cbbceaa193b0c0fd Mon Sep 17 00:00:00 2001 From: Nicolas Schichan Date: Wed, 22 May 2013 19:19:26 +0200 Subject: ASoC: cs42l52: fix bogus shifts in "Speaker Volume" and "PCM Mixer Volume" controls. Signed-off-by: Nicolas Schichan Acked-by: Brian Austin Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/cs42l52.c b/sound/soc/codecs/cs42l52.c index 1a17c85..8465c1fa 100644 --- a/sound/soc/codecs/cs42l52.c +++ b/sound/soc/codecs/cs42l52.c @@ -413,7 +413,7 @@ static const struct snd_kcontrol_new cs42l52_snd_controls[] = { SOC_ENUM("Headphone Analog Gain", hp_gain_enum), SOC_DOUBLE_R_SX_TLV("Speaker Volume", CS42L52_SPKA_VOL, - CS42L52_SPKB_VOL, 7, 0x1, 0xff, hl_tlv), + CS42L52_SPKB_VOL, 0, 0x1, 0xff, hl_tlv), SOC_DOUBLE_R_SX_TLV("Bypass Volume", CS42L52_PASSTHRUA_VOL, CS42L52_PASSTHRUB_VOL, 6, 0x18, 0x90, pga_tlv), @@ -441,7 +441,7 @@ static const struct snd_kcontrol_new cs42l52_snd_controls[] = { SOC_DOUBLE_R_SX_TLV("PCM Mixer Volume", CS42L52_PCMA_MIXER_VOL, CS42L52_PCMB_MIXER_VOL, - 6, 0x7f, 0x19, hl_tlv), + 0, 0x7f, 0x19, hl_tlv), SOC_DOUBLE_R("PCM Mixer Switch", CS42L52_PCMA_MIXER_VOL, CS42L52_PCMB_MIXER_VOL, 7, 1, 1), -- cgit v0.10.2 From 40e2516acb426f349c70e3bada821f3203b69de2 Mon Sep 17 00:00:00 2001 From: Nicolas Schichan Date: Wed, 22 May 2013 19:19:27 +0200 Subject: ASoC: cs42l52: fix master playback mute mask. The mask should define the bits to change in the register, not the bits to preserve. This fixes the inadvertent changes of the "Headphone Analog Gain" value during mute/unmute. Signed-off-by: Nicolas Schichan Acked-by: Brian Austin Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/cs42l52.h b/sound/soc/codecs/cs42l52.h index 60985c0..4277012 100644 --- a/sound/soc/codecs/cs42l52.h +++ b/sound/soc/codecs/cs42l52.h @@ -157,7 +157,7 @@ #define CS42L52_PB_CTL1_INV_PCMA (1 << 2) #define CS42L52_PB_CTL1_MSTB_MUTE (1 << 1) #define CS42L52_PB_CTL1_MSTA_MUTE (1 << 0) -#define CS42L52_PB_CTL1_MUTE_MASK 0xFFFD +#define CS42L52_PB_CTL1_MUTE_MASK 0x03 #define CS42L52_PB_CTL1_MUTE 3 #define CS42L52_PB_CTL1_UNMUTE 0 -- cgit v0.10.2 From beaee9cac180e37bbb30d538bcea0ebbcf4fba0e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 30 Apr 2013 10:57:05 +0300 Subject: atmel: printing bogus information There was an extra ';' character added to the end of the if statement which means that it always prints that the /proc entry wasn't created even though it was. Signed-off-by: Dan Carpenter Acked-by: David Howells Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index 830bb1d..b827d51 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -1624,7 +1624,7 @@ struct net_device *init_atmel_card(unsigned short irq, unsigned long port, netif_carrier_off(dev); - if (!proc_create_data("driver/atmel", 0, NULL, &atmel_proc_fops, priv)); + if (!proc_create_data("driver/atmel", 0, NULL, &atmel_proc_fops, priv)) printk(KERN_WARNING "atmel: unable to create /proc entry.\n"); printk(KERN_INFO "%s: Atmel at76c50x. Version %d.%d. MAC %pM\n", -- cgit v0.10.2 From a3c3cac5d31879cd9ae2de7874dc6544ca704aec Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 22 May 2013 12:57:24 -0400 Subject: SUNRPC: Prevent an rpc_task wakeup race The lockless RPC_IS_QUEUED() test in __rpc_execute means that we need to be careful about ordering the calls to rpc_test_and_set_running(task) and rpc_clear_queued(task). If we get the order wrong, then we may end up testing the RPC_TASK_RUNNING flag after __rpc_execute() has looped and changed the state of the rpc_task. Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c index f8529fc..5356b12 100644 --- a/net/sunrpc/sched.c +++ b/net/sunrpc/sched.c @@ -324,11 +324,17 @@ EXPORT_SYMBOL_GPL(__rpc_wait_for_completion_task); * Note: If the task is ASYNC, and is being made runnable after sitting on an * rpc_wait_queue, this must be called with the queue spinlock held to protect * the wait queue operation. + * Note the ordering of rpc_test_and_set_running() and rpc_clear_queued(), + * which is needed to ensure that __rpc_execute() doesn't loop (due to the + * lockless RPC_IS_QUEUED() test) before we've had a chance to test + * the RPC_TASK_RUNNING flag. */ static void rpc_make_runnable(struct rpc_task *task) { + bool need_wakeup = !rpc_test_and_set_running(task); + rpc_clear_queued(task); - if (rpc_test_and_set_running(task)) + if (!need_wakeup) return; if (RPC_IS_ASYNC(task)) { INIT_WORK(&task->u.tk_work, rpc_async_schedule); -- cgit v0.10.2 From 0c9b5a317b8ae7201fed07ec66d642b2ad7ea1b0 Mon Sep 17 00:00:00 2001 From: Jiang Liu Date: Fri, 17 May 2013 23:45:18 +0800 Subject: avr32: fix building warnings caused by redefinitions of HZ As suggested by David Howells , use asm-generic/param.h and uapi/asm-generic/param.h for AVR32. It also fixes building warnings caused by redefinitions of HZ: In file included from /ws/linux/kernel/linux.git/include/uapi/linux/param.h:4, from include/linux/timex.h:63, from include/linux/jiffies.h:8, from include/linux/ktime.h:25, from include/linux/timer.h:5, from include/linux/workqueue.h:8, from include/linux/srcu.h:34, from include/linux/notifier.h:15, from include/linux/memory_hotplug.h:6, from include/linux/mmzone.h:777, from include/linux/gfp.h:4, from arch/avr32/mm/init.c:10: /ws/linux/kernel/linux.git/arch/avr32/include/asm/param.h:6:1: warning: "HZ" redefined In file included from /ws/linux/kernel/linux.git/arch/avr32/include/asm/param.h:4, from /ws/linux/kernel/linux.git/include/uapi/linux/param.h:4, from include/linux/timex.h:63, from include/linux/jiffies.h:8, from include/linux/ktime.h:25, from include/linux/timer.h:5, from include/linux/workqueue.h:8, from include/linux/srcu.h:34, from include/linux/notifier.h:15, from include/linux/memory_hotplug.h:6, from include/linux/mmzone.h:777, from include/linux/gfp.h:4, from arch/avr32/mm/init.c:10: /ws/linux/kernel/linux.git/arch/avr32/include/uapi/asm/param.h:6:1: warning: this is the location of the previous definition Signed-off-by: Jiang Liu Cc: Hans-Christian Egtvedt Cc: Haavard Skinnemoen Cc: linux-kernel@vger.kernel.org Signed-off-by: Hans-Christian Egtvedt diff --git a/arch/avr32/include/asm/Kbuild b/arch/avr32/include/asm/Kbuild index 4dd4f78..d22af85 100644 --- a/arch/avr32/include/asm/Kbuild +++ b/arch/avr32/include/asm/Kbuild @@ -2,3 +2,4 @@ generic-y += clkdev.h generic-y += exec.h generic-y += trace_clock.h +generic-y += param.h diff --git a/arch/avr32/include/asm/param.h b/arch/avr32/include/asm/param.h deleted file mode 100644 index 009a167..0000000 --- a/arch/avr32/include/asm/param.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __ASM_AVR32_PARAM_H -#define __ASM_AVR32_PARAM_H - -#include - -# define HZ CONFIG_HZ -# define USER_HZ 100 /* User interfaces are in "ticks" */ -# define CLOCKS_PER_SEC (USER_HZ) /* frequency at which times() counts */ -#endif /* __ASM_AVR32_PARAM_H */ diff --git a/arch/avr32/include/uapi/asm/Kbuild b/arch/avr32/include/uapi/asm/Kbuild index df53e7a..3b85ead 100644 --- a/arch/avr32/include/uapi/asm/Kbuild +++ b/arch/avr32/include/uapi/asm/Kbuild @@ -33,3 +33,4 @@ header-y += termbits.h header-y += termios.h header-y += types.h header-y += unistd.h +generic-y += param.h diff --git a/arch/avr32/include/uapi/asm/param.h b/arch/avr32/include/uapi/asm/param.h deleted file mode 100644 index d28aa5e..0000000 --- a/arch/avr32/include/uapi/asm/param.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef _UAPI__ASM_AVR32_PARAM_H -#define _UAPI__ASM_AVR32_PARAM_H - - -#ifndef HZ -# define HZ 100 -#endif - -/* TODO: Should be configurable */ -#define EXEC_PAGESIZE 4096 - -#ifndef NOGROUP -# define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 - -#endif /* _UAPI__ASM_AVR32_PARAM_H */ -- cgit v0.10.2 From 934fc24df10abfd5aff533d0d044a17669d77d79 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Wed, 15 May 2013 10:46:30 +0100 Subject: ARM: 7723/1: crypto: sha1-armv4-large.S: fix SP handling Make the SHA1 asm code ABI conformant by making sure all stack accesses occur above the stack pointer. Origin: http://git.openssl.org/gitweb/?p=openssl.git;a=commit;h=1a9d60d2 Signed-off-by: Ard Biesheuvel Acked-by: Nicolas Pitre Cc: stable@vger.kernel.org Signed-off-by: Russell King diff --git a/arch/arm/crypto/sha1-armv4-large.S b/arch/arm/crypto/sha1-armv4-large.S index 92c6eed..99207c4 100644 --- a/arch/arm/crypto/sha1-armv4-large.S +++ b/arch/arm/crypto/sha1-armv4-large.S @@ -195,6 +195,7 @@ ENTRY(sha1_block_data_order) add r3,r3,r10 @ E+=F_00_19(B,C,D) cmp r14,sp bne .L_00_15 @ [((11+4)*5+2)*3] + sub sp,sp,#25*4 #if __ARM_ARCH__<7 ldrb r10,[r1,#2] ldrb r9,[r1,#3] @@ -290,7 +291,6 @@ ENTRY(sha1_block_data_order) add r3,r3,r10 @ E+=F_00_19(B,C,D) ldr r8,.LK_20_39 @ [+15+16*4] - sub sp,sp,#25*4 cmn sp,#0 @ [+3], clear carry to denote 20_39 .L_20_39_or_60_79: ldr r9,[r14,#15*4] -- cgit v0.10.2 From 4ca46c5e1f38e32c90247686e9e17dae213ecbdb Mon Sep 17 00:00:00 2001 From: Steven Capper Date: Thu, 16 May 2013 17:16:11 +0100 Subject: ARM: 7727/1: remove the .vm_mm value from gate_vma If one reads /proc/$PID/smaps, the mmap_sem belonging to the address space of the task being examined is locked for reading. All the pages of the vmas belonging to the task's address space are then walked with this lock held. If a gate_vma is present in the architecture, it too is examined by the fs/proc/task_mmu.c code. As gate_vma doesn't belong to the address space of the task though, its pages are not walked. A recent cleanup (commit f6604efe) of the gate_vma initialisation code set the vm_mm value to &init_mm. Unfortunately a non-NULL vm_mm value in the gate_vma will cause the task_mmu code to attempt to walk the pages of the gate_vma (with no mmap-sem lock held). If one enables Transparent Huge Page support and vm debugging, this will then cause OOPses as pmd_trans_huge_lock is called without mmap_sem being locked. This patch removes the .vm_mm value from gate_vma, restoring the original behaviour of the task_mmu code. Signed-off-by: Steve Capper Signed-off-by: Russell King diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index f219703..282de48 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -411,7 +411,6 @@ static struct vm_area_struct gate_vma = { .vm_start = 0xffff0000, .vm_end = 0xffff0000 + PAGE_SIZE, .vm_flags = VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYEXEC, - .vm_mm = &init_mm, }; static int __init gate_vma_init(void) -- cgit v0.10.2 From f27d6e172367a424ecf9d373062a820338671277 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 16 May 2013 19:38:51 +0100 Subject: ARM: 7729/1: vfp: ensure VFP_arch is non-zero when VFP is not supported Commit d3f79584a8b5 ("ARM: cleanup undefined instruction entry code") improved the register scheduling when handling undefined instructions. A side effect of this is that r5 is now used as a temporary, whilst the VFP probing code relies on r5 containing a non-zero value when VFP is not supported. This patch fixes the VFP detection code so that we don't rely on the contents of r5. Without this patch, Linux dies loudly on CPUs without VFP support. Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S index 323ce1a..46e1749 100644 --- a/arch/arm/vfp/entry.S +++ b/arch/arm/vfp/entry.S @@ -60,7 +60,7 @@ ENTRY(vfp_testing_entry) str r11, [r10, #TI_PREEMPT] #endif ldr r0, VFP_arch_address - str r5, [r0] @ known non-zero value + str r0, [r0] @ set to non-zero value mov pc, r9 @ we have handled the fault ENDPROC(vfp_testing_entry) -- cgit v0.10.2 From c80712c793febdf1b13ad0e1c71a051e071b3fd8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Micha=C5=82=20Miros=C5=82aw?= Date: Sat, 4 May 2013 14:19:00 +0100 Subject: staging/iio/mxs-lradc: fix preenable for multiple buffers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes 'preenable failed: -EINVAL' error when using this driver. Signed-off-by: Michał Mirosław Signed-off-by: Jonathan Cameron diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c index 2856b8f..163c638 100644 --- a/drivers/staging/iio/adc/mxs-lradc.c +++ b/drivers/staging/iio/adc/mxs-lradc.c @@ -690,7 +690,6 @@ static void mxs_lradc_trigger_remove(struct iio_dev *iio) static int mxs_lradc_buffer_preenable(struct iio_dev *iio) { struct mxs_lradc *lradc = iio_priv(iio); - struct iio_buffer *buffer = iio->buffer; int ret = 0, chan, ofs = 0; unsigned long enable = 0; uint32_t ctrl4_set = 0; @@ -698,7 +697,7 @@ static int mxs_lradc_buffer_preenable(struct iio_dev *iio) uint32_t ctrl1_irq = 0; const uint32_t chan_value = LRADC_CH_ACCUMULATE | ((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET); - const int len = bitmap_weight(buffer->scan_mask, LRADC_MAX_TOTAL_CHANS); + const int len = bitmap_weight(iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS); if (!len) return -EINVAL; @@ -725,7 +724,7 @@ static int mxs_lradc_buffer_preenable(struct iio_dev *iio) lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR); writel(0xff, lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR); - for_each_set_bit(chan, buffer->scan_mask, LRADC_MAX_TOTAL_CHANS) { + for_each_set_bit(chan, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) { ctrl4_set |= chan << LRADC_CTRL4_LRADCSELECT_OFFSET(ofs); ctrl4_clr |= LRADC_CTRL4_LRADCSELECT_MASK(ofs); ctrl1_irq |= LRADC_CTRL1_LRADC_IRQ_EN(ofs); -- cgit v0.10.2 From 3b813798aa7030f1beef638c75f8b0008f737a82 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 7 May 2013 12:51:00 +0100 Subject: staging:iio:light:tsl2x7x: fix the error handling in tsl2x7x_probe() Fix to return -EINVAL in the i2c device found error handling case instead of 0, as done elsewhere in this function. And also correct the fail1 and fail2 lable to do the right thing. Signed-off-by: Wei Yongjun Signed-off-by: Jonathan Cameron diff --git a/drivers/staging/iio/light/tsl2x7x_core.c b/drivers/staging/iio/light/tsl2x7x_core.c index d060f25..c99f890 100644 --- a/drivers/staging/iio/light/tsl2x7x_core.c +++ b/drivers/staging/iio/light/tsl2x7x_core.c @@ -1869,6 +1869,7 @@ static int tsl2x7x_probe(struct i2c_client *clientp, dev_info(&chip->client->dev, "%s: i2c device found does not match expected id\n", __func__); + ret = -EINVAL; goto fail1; } @@ -1907,7 +1908,7 @@ static int tsl2x7x_probe(struct i2c_client *clientp, if (ret) { dev_err(&clientp->dev, "%s: irq request failed", __func__); - goto fail2; + goto fail1; } } @@ -1920,17 +1921,17 @@ static int tsl2x7x_probe(struct i2c_client *clientp, if (ret) { dev_err(&clientp->dev, "%s: iio registration failed\n", __func__); - goto fail1; + goto fail2; } dev_info(&clientp->dev, "%s Light sensor found.\n", id->name); return 0; -fail1: +fail2: if (clientp->irq) free_irq(clientp->irq, indio_dev); -fail2: +fail1: iio_device_free(indio_dev); return ret; -- cgit v0.10.2 From 0ae5fb6fd346cf368639fb6256db6af0831b0048 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 9 May 2013 08:49:00 +0100 Subject: iio: dac: Fix build error when CONFIG_SPI_MASTER=y && CONFIG_I2C=m This patch fixes below build error when CONFIG_SPI_MASTER=y && CONFIG_I2C=m: drivers/built-in.o: In function `ad5064_i2c_write': drivers/iio/dac/ad5064.c:608: undefined reference to `i2c_master_send' drivers/built-in.o: In function `ad5064_i2c_register_driver': drivers/iio/dac/ad5064.c:646: undefined reference to `i2c_register_driver' drivers/built-in.o: In function `ad5064_i2c_unregister_driver': drivers/iio/dac/ad5064.c:651: undefined reference to `i2c_del_driver' make: *** [vmlinux] Error 1 When CONFIG_I2C=m, meaning we can't build the drivers in with I2C support. Thus don't allow the drivers to be compiled as built-in when CONFIG_I2C=m. The real fix though is to break the driver apart into a SPI part, an I2C part and a common part. But that's something for 3.11 while this is something for 3.10/stable. Reported-by: Wu Fengguang Reported-by: Randy Dunlap Signed-off-by: Axel Lin Acked-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig index f4a6f08..b61160b 100644 --- a/drivers/iio/dac/Kconfig +++ b/drivers/iio/dac/Kconfig @@ -5,7 +5,7 @@ menu "Digital to analog converters" config AD5064 tristate "Analog Devices AD5064 and similar multi-channel DAC driver" - depends on (SPI_MASTER || I2C) + depends on (SPI_MASTER && I2C!=m) || I2C help Say yes here to build support for Analog Devices AD5024, AD5025, AD5044, AD5045, AD5064, AD5064-1, AD5065, AD5628, AD5629R, AD5648, AD5666, AD5668, @@ -27,7 +27,7 @@ config AD5360 config AD5380 tristate "Analog Devices AD5380/81/82/83/84/90/91/92 DAC driver" - depends on (SPI_MASTER || I2C) + depends on (SPI_MASTER && I2C!=m) || I2C select REGMAP_I2C if I2C select REGMAP_SPI if SPI_MASTER help @@ -57,7 +57,7 @@ config AD5624R_SPI config AD5446 tristate "Analog Devices AD5446 and similar single channel DACs driver" - depends on (SPI_MASTER || I2C) + depends on (SPI_MASTER && I2C!=m) || I2C help Say yes here to build support for Analog Devices AD5300, AD5301, AD5310, AD5311, AD5320, AD5321, AD5444, AD5446, AD5450, AD5451, AD5452, AD5453, -- cgit v0.10.2 From d61a04dc148db1d0e7fa2307eb0f7abbc44fcd98 Mon Sep 17 00:00:00 2001 From: Denis CIOCCA Date: Thu, 9 May 2013 14:35:00 +0100 Subject: iio:common:st: added disable function after read info raw data Signed-off-by: Denis Ciocca Signed-off-by: Jonathan Cameron diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c index bd33473..ed9bc8a 100644 --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -312,6 +312,8 @@ int st_sensors_read_info_raw(struct iio_dev *indio_dev, goto read_error; *val = *val >> ch->scan_type.shift; + + err = st_sensors_set_enable(indio_dev, false); } mutex_unlock(&indio_dev->mlock); -- cgit v0.10.2 From 927b4dc3e440a060bd7d9a7ecb83c3dcd80adc84 Mon Sep 17 00:00:00 2001 From: Naveen Krishna Chatradhi Date: Mon, 20 May 2013 07:34:00 +0100 Subject: iio: exynos_adc: fix wrong structure extration in suspend and resume The exynos_adc device structure was wrongly extracted from the dev* correcting the same. Using the regular conversion of struct device* -> struct platform_device* -> struct exynos_adc* seems wrong. Instead we should be doing struct device* -> struct iio_dev* -> struct exynos_adc* Signed-off-by: Naveen Krishna Chatradhi Reviewed-by: Doug Anderson Signed-off-by: Jonathan Cameron diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c index 9f3a8ef..b3d03d3 100644 --- a/drivers/iio/adc/exynos_adc.c +++ b/drivers/iio/adc/exynos_adc.c @@ -390,8 +390,8 @@ static int exynos_adc_remove(struct platform_device *pdev) #ifdef CONFIG_PM_SLEEP static int exynos_adc_suspend(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct exynos_adc *info = platform_get_drvdata(pdev); + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct exynos_adc *info = iio_priv(indio_dev); u32 con; if (info->version == ADC_V2) { @@ -413,8 +413,8 @@ static int exynos_adc_suspend(struct device *dev) static int exynos_adc_resume(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct exynos_adc *info = platform_get_drvdata(pdev); + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct exynos_adc *info = iio_priv(indio_dev); int ret; ret = regulator_enable(info->vdd); -- cgit v0.10.2 From fb03a43f5fb42000dcc62d91138c1c24fca609b0 Mon Sep 17 00:00:00 2001 From: Nithin Sujir Date: Tue, 21 May 2013 12:57:32 +0000 Subject: tg3: Ensure boot code has completed initialization before accessing hardware After resetting the device, the driver waits for a signature to be updated to know that firmware has completed initialization. However, the call to tg3_poll_fw() is being done too late and we're writing to the GRC_MODE register before it has completely initialized, causing contention with firmware. This logic has existed since day one but is causing PCIE link to go down randomly at startup on one platform once every few hundred reboots. Move the tg3_poll_fw() up to before we write to the GRC_MODE register after reset. Signed-off-by: Nithin Nayak Sujir Signed-off-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index e285d76..158a7c9 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -8911,6 +8911,10 @@ static int tg3_chip_reset(struct tg3 *tp) tg3_halt_cpu(tp, RX_CPU_BASE); } + err = tg3_poll_fw(tp); + if (err) + return err; + tw32(GRC_MODE, tp->grc_mode); if (tg3_chip_rev_id(tp) == CHIPREV_ID_5705_A0) { @@ -8941,10 +8945,6 @@ static int tg3_chip_reset(struct tg3 *tp) tg3_ape_unlock(tp, TG3_APE_LOCK_GRC); - err = tg3_poll_fw(tp); - if (err) - return err; - tg3_mdio_start(tp); if (tg3_flag(tp, PCI_EXPRESS) && -- cgit v0.10.2 From c2bba067660f71408548e9206bc9be27885a815c Mon Sep 17 00:00:00 2001 From: Nithin Sujir Date: Tue, 21 May 2013 12:57:33 +0000 Subject: tg3: Update version to 3.132 Signed-off-by: Nithin Nayak Sujir Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 158a7c9..1f2dd92 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -94,10 +94,10 @@ static inline void _tg3_flag_clear(enum TG3_FLAGS flag, unsigned long *bits) #define DRV_MODULE_NAME "tg3" #define TG3_MAJ_NUM 3 -#define TG3_MIN_NUM 131 +#define TG3_MIN_NUM 132 #define DRV_MODULE_VERSION \ __stringify(TG3_MAJ_NUM) "." __stringify(TG3_MIN_NUM) -#define DRV_MODULE_RELDATE "April 09, 2013" +#define DRV_MODULE_RELDATE "May 21, 2013" #define RESET_KIND_SHUTDOWN 0 #define RESET_KIND_INIT 1 -- cgit v0.10.2 From 02135582f38e977fd609a7e345d7beb8c9b1c71f Mon Sep 17 00:00:00 2001 From: Sony Chacko Date: Tue, 21 May 2013 09:26:59 +0000 Subject: qlcnic: Return proper error codes from probe failure paths Fix error paths in probe to assign proper error codes to probe return value. Signed-off-by: Sony Chacko Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 8fb836d..9a7519f 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -2016,8 +2016,10 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) pci_enable_pcie_error_reporting(pdev); ahw = kzalloc(sizeof(struct qlcnic_hardware_context), GFP_KERNEL); - if (!ahw) + if (!ahw) { + err = -ENOMEM; goto err_out_free_res; + } switch (ent->device) { case PCI_DEVICE_ID_QLOGIC_QLE824X: @@ -2053,6 +2055,7 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) adapter->qlcnic_wq = create_singlethread_workqueue("qlcnic"); if (adapter->qlcnic_wq == NULL) { + err = -ENOMEM; dev_err(&pdev->dev, "Failed to create workqueue\n"); goto err_out_free_netdev; } @@ -2133,6 +2136,10 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_out_disable_msi; } + err = qlcnic_get_act_pci_func(adapter); + if (err) + goto err_out_disable_mbx_intr; + err = qlcnic_setup_netdev(adapter, netdev, pci_using_dac); if (err) goto err_out_disable_mbx_intr; @@ -2162,9 +2169,6 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) break; } - if (qlcnic_get_act_pci_func(adapter)) - goto err_out_disable_mbx_intr; - if (adapter->drv_mac_learn) qlcnic_alloc_lb_filters_mem(adapter); -- cgit v0.10.2 From 0ce54ce4aaef1389fb8d640271748ace257cb763 Mon Sep 17 00:00:00 2001 From: Sony Chacko Date: Tue, 21 May 2013 09:27:00 +0000 Subject: qlcnic: remove netdev->trans_start updates within the driver Code is removed because netdev->trans_start updates made by the driver will be ignored by the kernel. Signed-off-by: Sony Chacko Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c index c67d1eb..5e7fb1d 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c @@ -382,8 +382,6 @@ static int qlcnic_83xx_idc_tx_soft_reset(struct qlcnic_adapter *adapter) clear_bit(__QLCNIC_RESETTING, &adapter->state); dev_err(&adapter->pdev->dev, "%s:\n", __func__); - adapter->netdev->trans_start = jiffies; - return 0; } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 9a7519f..0da38df 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -3153,10 +3153,8 @@ qlcnic_check_health(struct qlcnic_adapter *adapter) if (adapter->need_fw_reset) goto detach; - if (adapter->ahw->reset_context && qlcnic_auto_fw_reset) { + if (adapter->ahw->reset_context && qlcnic_auto_fw_reset) qlcnic_reset_hw_context(adapter); - adapter->netdev->trans_start = jiffies; - } return 0; } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c index 3869c38..196b2d1 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c @@ -1734,7 +1734,6 @@ static int qlcnic_sriov_vf_handle_context_reset(struct qlcnic_adapter *adapter) if (!qlcnic_sriov_vf_reinit_driver(adapter)) { qlcnic_sriov_vf_attach(adapter); - adapter->netdev->trans_start = jiffies; adapter->tx_timeo_cnt = 0; adapter->reset_ctx_cnt = 0; adapter->fw_fail_cnt = 0; -- cgit v0.10.2 From 147a90887baa98d73db1fa7ed9e755bf48960c21 Mon Sep 17 00:00:00 2001 From: Shahed Shaikh Date: Tue, 21 May 2013 09:27:01 +0000 Subject: qlcnic: Fix updating netdev->features o After change in EPORT features of 82xx adapter, netdev->features needs to be updated to reflect EPORT feature updates but driver was manipulating netdev->features at wrong place. o This patch uses netdev_update_features() and .ndo_fix_features() to update netdev->features properly. Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 019c5f7..c1b693c 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -907,8 +907,11 @@ struct qlcnic_ipaddr { #define QLCNIC_FW_HANG 0x4000 #define QLCNIC_FW_LRO_MSS_CAP 0x8000 #define QLCNIC_TX_INTR_SHARED 0x10000 +#define QLCNIC_APP_CHANGED_FLAGS 0x20000 #define QLCNIC_IS_MSI_FAMILY(adapter) \ ((adapter)->flags & (QLCNIC_MSI_ENABLED | QLCNIC_MSIX_ENABLED)) +#define QLCNIC_IS_TSO_CAPABLE(adapter) \ + ((adapter)->ahw->capabilities & QLCNIC_FW_CAPABILITY_TSO) #define QLCNIC_DEF_NUM_STS_DESC_RINGS 4 #define QLCNIC_MSIX_TBL_SPACE 8192 @@ -1034,6 +1037,7 @@ struct qlcnic_adapter { spinlock_t rx_mac_learn_lock; u32 file_prd_off; /*File fw product offset*/ u32 fw_version; + u32 offload_flags; const struct firmware *fw; }; @@ -1542,6 +1546,8 @@ void qlcnic_add_lb_filter(struct qlcnic_adapter *, struct sk_buff *, int, u16); int qlcnic_83xx_configure_opmode(struct qlcnic_adapter *adapter); int qlcnic_read_mac_addr(struct qlcnic_adapter *); int qlcnic_setup_netdev(struct qlcnic_adapter *, struct net_device *, int); +void qlcnic_set_netdev_features(struct qlcnic_adapter *, + struct qlcnic_esw_func_cfg *); void qlcnic_sriov_vf_schedule_multi(struct net_device *); void qlcnic_vf_add_mc_list(struct net_device *, u16); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c index 6a6512b..106a12f 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c @@ -973,16 +973,57 @@ int qlcnic_change_mtu(struct net_device *netdev, int mtu) return rc; } +static netdev_features_t qlcnic_process_flags(struct qlcnic_adapter *adapter, + netdev_features_t features) +{ + u32 offload_flags = adapter->offload_flags; + + if (offload_flags & BIT_0) { + features |= NETIF_F_RXCSUM | NETIF_F_IP_CSUM | + NETIF_F_IPV6_CSUM; + adapter->rx_csum = 1; + if (QLCNIC_IS_TSO_CAPABLE(adapter)) { + if (!(offload_flags & BIT_1)) + features &= ~NETIF_F_TSO; + else + features |= NETIF_F_TSO; + + if (!(offload_flags & BIT_2)) + features &= ~NETIF_F_TSO6; + else + features |= NETIF_F_TSO6; + } + } else { + features &= ~(NETIF_F_RXCSUM | + NETIF_F_IP_CSUM | + NETIF_F_IPV6_CSUM); + + if (QLCNIC_IS_TSO_CAPABLE(adapter)) + features &= ~(NETIF_F_TSO | NETIF_F_TSO6); + adapter->rx_csum = 0; + } + + return features; +} netdev_features_t qlcnic_fix_features(struct net_device *netdev, netdev_features_t features) { struct qlcnic_adapter *adapter = netdev_priv(netdev); + netdev_features_t changed; - if ((adapter->flags & QLCNIC_ESWITCH_ENABLED) && - qlcnic_82xx_check(adapter)) { - netdev_features_t changed = features ^ netdev->features; - features ^= changed & (NETIF_F_ALL_CSUM | NETIF_F_RXCSUM); + if (qlcnic_82xx_check(adapter) && + (adapter->flags & QLCNIC_ESWITCH_ENABLED)) { + if (adapter->flags & QLCNIC_APP_CHANGED_FLAGS) { + features = qlcnic_process_flags(adapter, features); + } else { + changed = features ^ netdev->features; + features ^= changed & (NETIF_F_RXCSUM | + NETIF_F_IP_CSUM | + NETIF_F_IPV6_CSUM | + NETIF_F_TSO | + NETIF_F_TSO6); + } } if (!(features & NETIF_F_RXCSUM)) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 0da38df..aeb26a85 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -84,14 +84,9 @@ static int qlcnic_start_firmware(struct qlcnic_adapter *); static void qlcnic_free_lb_filters_mem(struct qlcnic_adapter *adapter); static void qlcnic_dev_set_npar_ready(struct qlcnic_adapter *); static int qlcnicvf_start_firmware(struct qlcnic_adapter *); -static void qlcnic_set_netdev_features(struct qlcnic_adapter *, - struct qlcnic_esw_func_cfg *); static int qlcnic_vlan_rx_add(struct net_device *, __be16, u16); static int qlcnic_vlan_rx_del(struct net_device *, __be16, u16); -#define QLCNIC_IS_TSO_CAPABLE(adapter) \ - ((adapter)->ahw->capabilities & QLCNIC_FW_CAPABILITY_TSO) - static u32 qlcnic_vlan_tx_check(struct qlcnic_adapter *adapter) { struct qlcnic_hardware_context *ahw = adapter->ahw; @@ -1074,8 +1069,6 @@ void qlcnic_set_eswitch_port_features(struct qlcnic_adapter *adapter, if (!esw_cfg->promisc_mode) adapter->flags |= QLCNIC_PROMISC_DISABLED; - - qlcnic_set_netdev_features(adapter, esw_cfg); } int qlcnic_set_eswitch_port_config(struct qlcnic_adapter *adapter) @@ -1090,51 +1083,23 @@ int qlcnic_set_eswitch_port_config(struct qlcnic_adapter *adapter) return -EIO; qlcnic_set_vlan_config(adapter, &esw_cfg); qlcnic_set_eswitch_port_features(adapter, &esw_cfg); + qlcnic_set_netdev_features(adapter, &esw_cfg); return 0; } -static void -qlcnic_set_netdev_features(struct qlcnic_adapter *adapter, - struct qlcnic_esw_func_cfg *esw_cfg) +void qlcnic_set_netdev_features(struct qlcnic_adapter *adapter, + struct qlcnic_esw_func_cfg *esw_cfg) { struct net_device *netdev = adapter->netdev; - unsigned long features, vlan_features; if (qlcnic_83xx_check(adapter)) return; - features = (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_RXCSUM | - NETIF_F_IPV6_CSUM | NETIF_F_GRO); - vlan_features = (NETIF_F_SG | NETIF_F_IP_CSUM | - NETIF_F_IPV6_CSUM); - - if (QLCNIC_IS_TSO_CAPABLE(adapter)) { - features |= (NETIF_F_TSO | NETIF_F_TSO6); - vlan_features |= (NETIF_F_TSO | NETIF_F_TSO6); - } - - if (netdev->features & NETIF_F_LRO) - features |= NETIF_F_LRO; - - if (esw_cfg->offload_flags & BIT_0) { - netdev->features |= features; - adapter->rx_csum = 1; - if (!(esw_cfg->offload_flags & BIT_1)) { - netdev->features &= ~NETIF_F_TSO; - features &= ~NETIF_F_TSO; - } - if (!(esw_cfg->offload_flags & BIT_2)) { - netdev->features &= ~NETIF_F_TSO6; - features &= ~NETIF_F_TSO6; - } - } else { - netdev->features &= ~features; - features &= ~features; - adapter->rx_csum = 0; - } - - netdev->vlan_features = (features & vlan_features); + adapter->offload_flags = esw_cfg->offload_flags; + adapter->flags |= QLCNIC_APP_CHANGED_FLAGS; + netdev_update_features(netdev); + adapter->flags &= ~QLCNIC_APP_CHANGED_FLAGS; } static int diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c index 4e22e79..e7a2fe2 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c @@ -544,6 +544,9 @@ static ssize_t qlcnic_sysfs_write_esw_config(struct file *file, switch (esw_cfg[i].op_mode) { case QLCNIC_PORT_DEFAULTS: qlcnic_set_eswitch_port_features(adapter, &esw_cfg[i]); + rtnl_lock(); + qlcnic_set_netdev_features(adapter, &esw_cfg[i]); + rtnl_unlock(); break; case QLCNIC_ADD_VLAN: qlcnic_set_vlan_config(adapter, &esw_cfg[i]); -- cgit v0.10.2 From 3680354209dcdeb84671ad3740ef52ab754e05d0 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 19 May 2013 04:38:46 +0000 Subject: net: fec: use a more proper compatible string for MVF type device MVF is a family while MVF600 is a particular SoC in the family. We generally prefer to use SoC rather than family name in compatible string to define a particular type of fec device. And this is how fec_dt_ids works for all those IMX fec variants. Let's change mvf to mvf600 to have it work in the same way. Signed-off-by: Shawn Guo Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 570dfad..85a0603 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -109,7 +109,7 @@ static struct platform_device_id fec_devtype[] = { .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT | FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM, }, { - .name = "mvf-fec", + .name = "mvf600-fec", .driver_data = FEC_QUIRK_ENET_MAC, }, { /* sentinel */ @@ -122,7 +122,7 @@ enum imx_fec_type { IMX27_FEC, /* runs on i.mx27/35/51 */ IMX28_FEC, IMX6Q_FEC, - MVF_FEC, + MVF600_FEC, }; static const struct of_device_id fec_dt_ids[] = { @@ -130,7 +130,7 @@ static const struct of_device_id fec_dt_ids[] = { { .compatible = "fsl,imx27-fec", .data = &fec_devtype[IMX27_FEC], }, { .compatible = "fsl,imx28-fec", .data = &fec_devtype[IMX28_FEC], }, { .compatible = "fsl,imx6q-fec", .data = &fec_devtype[IMX6Q_FEC], }, - { .compatible = "fsl,mvf-fec", .data = &fec_devtype[MVF_FEC], }, + { .compatible = "fsl,mvf600-fec", .data = &fec_devtype[MVF600_FEC], }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, fec_dt_ids); -- cgit v0.10.2 From 140c3c6a2bcd2c31e2f7f5a8d59689724776c8e5 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 20 May 2013 14:44:43 +0000 Subject: perf: net_dropmonitor: Fix trace parameter order This works much better if we don't treat protocol numbers as addresses. Cc: stable@vger.kernel.org Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller diff --git a/tools/perf/scripts/python/net_dropmonitor.py b/tools/perf/scripts/python/net_dropmonitor.py index a4ffc95..adbfbf0 100755 --- a/tools/perf/scripts/python/net_dropmonitor.py +++ b/tools/perf/scripts/python/net_dropmonitor.py @@ -64,7 +64,7 @@ def trace_end(): # called from perf, when it finds a correspoinding event def skb__kfree_skb(name, context, cpu, sec, nsec, pid, comm, - skbaddr, protocol, location): + skbaddr, location, protocol): slocation = str(location) try: drop_log[slocation] = drop_log[slocation] + 1 -- cgit v0.10.2 From 5a1e99dd2028e00998d42029be86835d8ef4a46e Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 20 May 2013 14:45:26 +0000 Subject: perf: net_dropmonitor: Fix symbol-relative addresses The comparison between traced and symbol addresses is backwards: if the traced address doesn't exactly match a symbol (which we don't expect it to), we'll show the next symbol and the offset to it, whereas we should show the previous symbol and the offset from it. Cc: stable@vger.kernel.org Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller diff --git a/tools/perf/scripts/python/net_dropmonitor.py b/tools/perf/scripts/python/net_dropmonitor.py index adbfbf0..4c11605 100755 --- a/tools/perf/scripts/python/net_dropmonitor.py +++ b/tools/perf/scripts/python/net_dropmonitor.py @@ -40,9 +40,9 @@ def get_kallsyms_table(): def get_sym(sloc): loc = int(sloc) - for i in kallsyms: - if (i['loc'] >= loc): - return (i['name'], i['loc']-loc) + for i in kallsyms[::-1]: + if loc >= i['loc']: + return (i['name'], loc - i['loc']) return (None, 0) def print_drop_table(): -- cgit v0.10.2 From 326017c757e387007c6629797d7ae22fd33c1317 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 20 May 2013 14:45:34 +0000 Subject: perf: net_dropmonitor: Do not assume ordering of dictionaries The sort order of dictionaries in Python is undocumented. Use tuples instead, which are documented to be lexically ordered. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller diff --git a/tools/perf/scripts/python/net_dropmonitor.py b/tools/perf/scripts/python/net_dropmonitor.py index 4c11605..6acdc82e 100755 --- a/tools/perf/scripts/python/net_dropmonitor.py +++ b/tools/perf/scripts/python/net_dropmonitor.py @@ -32,7 +32,7 @@ def get_kallsyms_table(): j = j +1 if ((j % 100) == 0): print "\r" + str(j) + "/" + str(linecount), - kallsyms.append({ 'loc': loc, 'name' : name}) + kallsyms.append((loc, name)) print "\r" + str(j) + "/" + str(linecount) kallsyms.sort() @@ -40,9 +40,9 @@ def get_kallsyms_table(): def get_sym(sloc): loc = int(sloc) - for i in kallsyms[::-1]: - if loc >= i['loc']: - return (i['name'], loc - i['loc']) + for symloc, name in kallsyms[::-1]: + if loc >= symloc: + return (name, loc - symloc) return (None, 0) def print_drop_table(): -- cgit v0.10.2 From 0ce58bae851dc3728af1c0b83905cd6b4565417a Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 20 May 2013 14:45:42 +0000 Subject: perf: net_dropmonitor: Use bisection in symbol lookup Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller diff --git a/tools/perf/scripts/python/net_dropmonitor.py b/tools/perf/scripts/python/net_dropmonitor.py index 6acdc82e..32fcee0 100755 --- a/tools/perf/scripts/python/net_dropmonitor.py +++ b/tools/perf/scripts/python/net_dropmonitor.py @@ -40,10 +40,24 @@ def get_kallsyms_table(): def get_sym(sloc): loc = int(sloc) - for symloc, name in kallsyms[::-1]: - if loc >= symloc: - return (name, loc - symloc) - return (None, 0) + + # Invariant: kallsyms[i][0] <= loc for all 0 <= i <= start + # kallsyms[i][0] > loc for all end <= i < len(kallsyms) + start, end = -1, len(kallsyms) + while end != start + 1: + pivot = (start + end) // 2 + if loc < kallsyms[pivot][0]: + end = pivot + else: + start = pivot + + # Now (start == -1 or kallsyms[start][0] <= loc) + # and (start == len(kallsyms) - 1 or loc < kallsyms[start + 1][0]) + if start >= 0: + symloc, name = kallsyms[start] + return (name, loc - symloc) + else: + return (None, 0) def print_drop_table(): print "%25s %25s %25s" % ("LOCATION", "OFFSET", "COUNT") -- cgit v0.10.2 From 6b75c7357c947dd9fd8482b3395664a9b7385ed5 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 20 May 2013 14:45:57 +0000 Subject: perf: net_dropmonitor: Remove progress indicator We can read /proc/kallsyms in a fraction of a second, so why waste a further fraction of a second showing progress? Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller diff --git a/tools/perf/scripts/python/net_dropmonitor.py b/tools/perf/scripts/python/net_dropmonitor.py index 32fcee0..b574059 100755 --- a/tools/perf/scripts/python/net_dropmonitor.py +++ b/tools/perf/scripts/python/net_dropmonitor.py @@ -15,28 +15,17 @@ kallsyms = [] def get_kallsyms_table(): global kallsyms + try: f = open("/proc/kallsyms", "r") - linecount = 0 - for line in f: - linecount = linecount+1 - f.seek(0) except: return - - j = 0 for line in f: loc = int(line.split()[0], 16) name = line.split()[2] - j = j +1 - if ((j % 100) == 0): - print "\r" + str(j) + "/" + str(linecount), kallsyms.append((loc, name)) - - print "\r" + str(j) + "/" + str(linecount) kallsyms.sort() - return def get_sym(sloc): loc = int(sloc) -- cgit v0.10.2 From bcef9a8f6f1dcff2a9bbe4ee21bfc50cc230984b Mon Sep 17 00:00:00 2001 From: Hans-Christoph Schemmel Date: Tue, 21 May 2013 02:07:17 +0000 Subject: qmi_wwan: Added support for Cinterion's PLxx WWAN Interface MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Added support for Cinterion's PLxx WWAN Interface by adding QMI_FIXED_INTF with Cinterion's Vendor ID as well as Product ID and WWAN Interface Number. Signed-off-by: Hans-Christoph Schemmel Signed-off-by: Christian Schmiedl Acked-by: Bjørn Mork Signed-off-by: David S. Miller diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index cf887c2..86adfa0 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -582,6 +582,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x1bbb, 0x011e, 4)}, /* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */ {QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */ {QMI_FIXED_INTF(0x1bc7, 0x1200, 5)}, /* Telit LE920 */ + {QMI_FIXED_INTF(0x1e2d, 0x12d1, 4)}, /* Cinterion PLxx */ /* 4. Gobi 1000 devices */ {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ -- cgit v0.10.2 From 0797c3a3e9660682b5df80911f35b523995a40bd Mon Sep 17 00:00:00 2001 From: Paul Zimmerman Date: Wed, 22 May 2013 15:10:15 -0700 Subject: staging: dwc2: remove compile warning for USB_DWC2_TRACK_MISSED_SOFS Remove the compile-time warning for this config option, and instead warn that it is experimental in the Kconfig text Reported-by: Geert Uytterhoeven Signed-off-by: Paul Zimmerman Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/dwc2/Kconfig b/drivers/staging/dwc2/Kconfig index f0b4739..609d35c 100644 --- a/drivers/staging/dwc2/Kconfig +++ b/drivers/staging/dwc2/Kconfig @@ -39,6 +39,7 @@ config USB_DWC2_TRACK_MISSED_SOFS bool "Enable Missed SOF Tracking" help Say Y here to enable logging of missed SOF events to the dmesg log. + WARNING: This feature is still experimental. If in doubt, say N. config USB_DWC2_DEBUG_PERIODIC diff --git a/drivers/staging/dwc2/hcd_intr.c b/drivers/staging/dwc2/hcd_intr.c index 6e5dbed..e24062f 100644 --- a/drivers/staging/dwc2/hcd_intr.c +++ b/drivers/staging/dwc2/hcd_intr.c @@ -56,8 +56,6 @@ static void dwc2_track_missed_sofs(struct dwc2_hsotg *hsotg) { #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS -#warning Compiling code to track missed SOFs - u16 curr_frame_number = hsotg->frame_number; if (hsotg->frame_num_idx < FRAME_NUM_ARRAY_SIZE) { -- cgit v0.10.2 From c8f6d8351ba8c89d5cd4c562552ec7ec29274e31 Mon Sep 17 00:00:00 2001 From: Bastian Triller Date: Sun, 19 May 2013 11:52:33 +0000 Subject: ACPI / video: Add "Asus UL30A" to ACPI video detect blacklist Like on UL30VT, the ACPI video driver can't control backlight correctly on Asus UL30A. Vendor driver (asus-laptop) can work. This patch is to add "Asus UL30A" to ACPI video detect blacklist in order to use asus-laptop for video control on the "Asus UL30A" rather than ACPI video driver. Signed-off-by: Bastian Triller Cc: All Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c index 66f6762..e6bd910 100644 --- a/drivers/acpi/video_detect.c +++ b/drivers/acpi/video_detect.c @@ -161,6 +161,14 @@ static struct dmi_system_id video_detect_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "UL30VT"), }, }, + { + .callback = video_detect_force_vendor, + .ident = "Asus UL30A", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "UL30A"), + }, + }, { }, }; -- cgit v0.10.2 From cc9a3e99949af4bcaf9027fc57f824b595a5fcac Mon Sep 17 00:00:00 2001 From: Jiada Wang Date: Mon, 20 May 2013 21:51:51 +0900 Subject: ARM i.MX6q: fix for ldb_di_sels As pll5_video_div has been introduced to represent the clock generated from post-divider for video. Instead of pll5_video, pll5_video_div should be proper root clock for ldb_di_sel. Signed-off-by: Jiada Wang Signed-off-by: Shawn Guo diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index dda9a2b..ba2de54 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -188,7 +188,7 @@ static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m" static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", }; static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll3_pfd0_720m", }; static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", }; -static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", }; +static const char *ldb_di_sels[] = { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", }; static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", }; static const char *ipu1_di0_sels[] = { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; static const char *ipu1_di1_sels[] = { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; -- cgit v0.10.2 From f538881cc672c1b049aa0a34a792d0953fcecba5 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Thu, 16 May 2013 12:19:29 +0530 Subject: ARC: [mm] Prevent stray dcache lines after__sync_icache_dcach() Flush and INVALIDATE the dcache page. This helper is only used for writeback of CODE pages to memory. So there's no value in keeping the dcache lines around. Infact it is risky as a writeback on natural eviction under pressure can cause un-needed writeback with weird issues on aliasing dcache configurations. Signed-off-by: Vineet Gupta diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c index 2f12bca..d4b7bb6 100644 --- a/arch/arc/mm/cache_arc700.c +++ b/arch/arc/mm/cache_arc700.c @@ -610,7 +610,7 @@ void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len) local_irq_save(flags); __ic_line_inv_vaddr(paddr, vaddr, len); - __dc_line_op(paddr, vaddr, len, OP_FLUSH); + __dc_line_op(paddr, vaddr, len, OP_FLUSH_N_INV); local_irq_restore(flags); } -- cgit v0.10.2 From a950549c675f2c8c504469dec7d780da8a6433dc Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Tue, 21 May 2013 15:25:11 +0530 Subject: ARC: copy_(to|from)_user() to honor usermode-access permissions This manifested as grep failing psuedo-randomly: -------------->8--------------------- [ARCLinux]$ ip address show lo | grep inet [ARCLinux]$ ip address show lo | grep inet [ARCLinux]$ ip address show lo | grep inet [ARCLinux]$ [ARCLinux]$ ip address show lo | grep inet inet 127.0.0.1/8 scope host lo -------------->8--------------------- ARC700 MMU provides fully orthogonal permission bits per page: Ur, Uw, Ux, Kr, Kw, Kx The user mode page permission templates used to have all Kernel mode access bits enabled. This caused a tricky race condition observed with uClibc buffered file read and UNIX pipes. 1. Read access to an anon mapped page in libc .bss: write-protected zero_page mapped: TLB Entry installed with Ur + K[rwx] 2. grep calls libc:getc() -> buffered read layer calls read(2) with the internal read buffer in same .bss page. The read() call is on STDIN which has been redirected to a pipe. read(2) => sys_read() => pipe_read() => copy_to_user() 3. Since page has Kernel-write permission (despite being user-mode write-protected), copy_to_user() suceeds w/o taking a MMU TLB-Miss Exception (page-fault for ARC). core-MM is unaware that kernel erroneously wrote to the reserved read-only zero-page (BUG #1) 4. Control returns to userspace which now does a write to same .bss page Since Linux MM is not aware that page has been modified by kernel, it simply reassigns a new writable zero-init page to mapping, loosing the prior write by kernel - effectively zero'ing out the libc read buffer under the hood - hence grep doesn't see right data (BUG #2) The fix is to make all kernel-mode access permissions mirror the user-mode ones. Note that the kernel still has full access to pages, when accessed directly (w/o MMU) - this fix ensures that kernel-mode access in copy_to_from() path uses the same faulting access model as for pure user accesses to keep MM fully aware of page state. The issue is peudo-random because it only shows up if the TLB entry installed in #1 is present at the time of #3. If it is evicted out, due to TLB pressure or some-such, then copy_to_user() does take a TLB Miss Exception, with a routine write-to-anon COW processing installing a fresh page for kernel writes and also usable as it is in userspace. Further the issue was dormant for so long as it depends on where the libc internal read buffer (in .bss) is mapped at runtime. If it happens to reside in file-backed data mapping of libc (in the page-aligned slack space trailing the file backed data), loader zero padding the slack space, does the early cow page replacement, setting things up at the very beginning itself. With gcc 4.8 based builds, the libc buffer got pushed out to a real anon mapping which triggers the issue. Reported-by: Anton Kolesov Cc: # 3.9 Signed-off-by: Vineet Gupta diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h index 1cc4720..95b1522 100644 --- a/arch/arc/include/asm/pgtable.h +++ b/arch/arc/include/asm/pgtable.h @@ -57,9 +57,9 @@ #define _PAGE_ACCESSED (1<<1) /* Page is accessed (S) */ #define _PAGE_CACHEABLE (1<<2) /* Page is cached (H) */ -#define _PAGE_EXECUTE (1<<3) /* Page has user execute perm (H) */ -#define _PAGE_WRITE (1<<4) /* Page has user write perm (H) */ -#define _PAGE_READ (1<<5) /* Page has user read perm (H) */ +#define _PAGE_U_EXECUTE (1<<3) /* Page has user execute perm (H) */ +#define _PAGE_U_WRITE (1<<4) /* Page has user write perm (H) */ +#define _PAGE_U_READ (1<<5) /* Page has user read perm (H) */ #define _PAGE_K_EXECUTE (1<<6) /* Page has kernel execute perm (H) */ #define _PAGE_K_WRITE (1<<7) /* Page has kernel write perm (H) */ #define _PAGE_K_READ (1<<8) /* Page has kernel perm (H) */ @@ -72,9 +72,9 @@ /* PD1 */ #define _PAGE_CACHEABLE (1<<0) /* Page is cached (H) */ -#define _PAGE_EXECUTE (1<<1) /* Page has user execute perm (H) */ -#define _PAGE_WRITE (1<<2) /* Page has user write perm (H) */ -#define _PAGE_READ (1<<3) /* Page has user read perm (H) */ +#define _PAGE_U_EXECUTE (1<<1) /* Page has user execute perm (H) */ +#define _PAGE_U_WRITE (1<<2) /* Page has user write perm (H) */ +#define _PAGE_U_READ (1<<3) /* Page has user read perm (H) */ #define _PAGE_K_EXECUTE (1<<4) /* Page has kernel execute perm (H) */ #define _PAGE_K_WRITE (1<<5) /* Page has kernel write perm (H) */ #define _PAGE_K_READ (1<<6) /* Page has kernel perm (H) */ @@ -93,7 +93,8 @@ #endif /* Kernel allowed all permissions for all pages */ -#define _K_PAGE_PERMS (_PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ) +#define _K_PAGE_PERMS (_PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ | \ + _PAGE_GLOBAL | _PAGE_PRESENT) #ifdef CONFIG_ARC_CACHE_PAGES #define _PAGE_DEF_CACHEABLE _PAGE_CACHEABLE @@ -106,7 +107,11 @@ * -by default cached, unless config otherwise * -present in memory */ -#define ___DEF (_PAGE_PRESENT | _K_PAGE_PERMS | _PAGE_DEF_CACHEABLE) +#define ___DEF (_PAGE_PRESENT | _PAGE_DEF_CACHEABLE) + +#define _PAGE_READ (_PAGE_U_READ | _PAGE_K_READ) +#define _PAGE_WRITE (_PAGE_U_WRITE | _PAGE_K_WRITE) +#define _PAGE_EXECUTE (_PAGE_U_EXECUTE | _PAGE_K_EXECUTE) /* Set of bits not changed in pte_modify */ #define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED) @@ -125,11 +130,10 @@ * kernel vaddr space - visible in all addr spaces, but kernel mode only * Thus Global, all-kernel-access, no-user-access, cached */ -#define PAGE_KERNEL __pgprot(___DEF | _PAGE_GLOBAL) +#define PAGE_KERNEL __pgprot(_K_PAGE_PERMS | _PAGE_DEF_CACHEABLE) /* ioremap */ -#define PAGE_KERNEL_NO_CACHE __pgprot(_PAGE_PRESENT | _K_PAGE_PERMS | \ - _PAGE_GLOBAL) +#define PAGE_KERNEL_NO_CACHE __pgprot(_K_PAGE_PERMS) /************************************************************************** * Mapping of vm_flags (Generic VM) to PTE flags (arch specific) diff --git a/arch/arc/include/asm/tlb.h b/arch/arc/include/asm/tlb.h index 85b6df8..cb0c708 100644 --- a/arch/arc/include/asm/tlb.h +++ b/arch/arc/include/asm/tlb.h @@ -16,7 +16,7 @@ /* Masks for actual TLB "PD"s */ #define PTE_BITS_IN_PD0 (_PAGE_GLOBAL | _PAGE_PRESENT) #define PTE_BITS_IN_PD1 (PAGE_MASK | _PAGE_CACHEABLE | \ - _PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ | \ + _PAGE_U_EXECUTE | _PAGE_U_WRITE | _PAGE_U_READ | \ _PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ) #ifndef __ASSEMBLY__ diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S index 9df765d..3357d26 100644 --- a/arch/arc/mm/tlbex.S +++ b/arch/arc/mm/tlbex.S @@ -277,7 +277,7 @@ ARC_ENTRY EV_TLBMissI ;---------------------------------------------------------------- ; VERIFY_PTE: Check if PTE permissions approp for executing code cmp_s r2, VMALLOC_START - mov.lo r2, (_PAGE_PRESENT | _PAGE_READ | _PAGE_EXECUTE) + mov.lo r2, (_PAGE_PRESENT | _PAGE_U_READ | _PAGE_U_EXECUTE) mov.hs r2, (_PAGE_PRESENT | _PAGE_K_READ | _PAGE_K_EXECUTE) and r3, r0, r2 ; Mask out NON Flag bits from PTE @@ -320,9 +320,9 @@ ARC_ENTRY EV_TLBMissD mov_s r2, 0 lr r3, [ecr] btst_s r3, ECR_C_BIT_DTLB_LD_MISS ; Read Access - or.nz r2, r2, _PAGE_READ ; chk for Read flag in PTE + or.nz r2, r2, _PAGE_U_READ ; chk for Read flag in PTE btst_s r3, ECR_C_BIT_DTLB_ST_MISS ; Write Access - or.nz r2, r2, _PAGE_WRITE ; chk for Write flag in PTE + or.nz r2, r2, _PAGE_U_WRITE ; chk for Write flag in PTE ; Above laddering takes care of XCHG access ; which is both Read and Write -- cgit v0.10.2 From da2e2c214953f37c2a6be20226537ca5a329724c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Emilio=20L=C3=B3pez?= Date: Wed, 22 May 2013 13:57:35 +0000 Subject: net: ethernet: apple: drop unused variable MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 3b0aaef ("net: ethernet: apple: initialize variables directly") dropped the only loop that was using i but did not remove the actual variable, therefore causing a warning when building. This patch drops the now redundant line. Signed-off-by: Emilio López Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/apple/bmac.c b/drivers/net/ethernet/apple/bmac.c index f36bbd6..8848190 100644 --- a/drivers/net/ethernet/apple/bmac.c +++ b/drivers/net/ethernet/apple/bmac.c @@ -1016,7 +1016,6 @@ static void bmac_set_multicast(struct net_device *dev) static void bmac_set_multicast(struct net_device *dev) { struct netdev_hw_addr *ha; - int i; unsigned short rx_cfg; u32 crc; -- cgit v0.10.2 From 1a5904342c7380ceddd61c0b37544d752d0b1433 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Emilio=20L=C3=B3pez?= Date: Wed, 22 May 2013 13:57:36 +0000 Subject: net: ethernet: korina: drop unused variable MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit e998fd4 ("net: ethernet: korina: initialize variables directly") dropped the only loop that was using i but did not remove the actual variable, therefore causing a warning when building. This patch drops the now redundant line. Signed-off-by: Emilio López Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/korina.c b/drivers/net/ethernet/korina.c index 5409fe8..907e94a 100644 --- a/drivers/net/ethernet/korina.c +++ b/drivers/net/ethernet/korina.c @@ -483,7 +483,6 @@ static void korina_multicast_list(struct net_device *dev) unsigned long flags; struct netdev_hw_addr *ha; u32 recognise = ETH_ARC_AB; /* always accept broadcasts */ - int i; /* Set promiscuous mode */ if (dev->flags & IFF_PROMISC) -- cgit v0.10.2 From c573972c111eb4c6b3f3250ad71e7c75cc799833 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Emilio=20L=C3=B3pez?= Date: Wed, 22 May 2013 13:57:37 +0000 Subject: net: ethernet: sun: drop unused variable MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit bfd428d ("net: ethernet: sun: initialize variables directly") dropped the only loop that was using i but did not remove the actual variable, therefore causing a warning when building. This patch drops the now redundant line. Reported-by: Stephen Rothwell Signed-off-by: Emilio López Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/sun/sunbmac.c b/drivers/net/ethernet/sun/sunbmac.c index 0549759..85d3b6b 100644 --- a/drivers/net/ethernet/sun/sunbmac.c +++ b/drivers/net/ethernet/sun/sunbmac.c @@ -995,7 +995,6 @@ static void bigmac_set_multicast(struct net_device *dev) struct bigmac *bp = netdev_priv(dev); void __iomem *bregs = bp->bregs; struct netdev_hw_addr *ha; - int i; u32 tmp, crc; /* Disable the receiver. The bit self-clears when -- cgit v0.10.2 From b5dd0bb43e209455fb83161d4c8774ce2c23f6e2 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 23 May 2013 08:04:09 +0200 Subject: microblaze: Use proper casting for inb/inw/inl in io.h We are going to move to asm-generic/io.h but let's fix compilation warnings first for 3.10. Warning message: arch/microblaze/include/asm/io.h:126:26: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] #define inb(port) readb((u8 *)((port))) ... Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h index 8cb8a85..2565cb9 100644 --- a/arch/microblaze/include/asm/io.h +++ b/arch/microblaze/include/asm/io.h @@ -123,11 +123,11 @@ static inline void writel(unsigned int v, volatile void __iomem *addr) * inb_p/inw_p/... * The macros don't do byte-swapping. */ -#define inb(port) readb((u8 *)((port))) +#define inb(port) readb((u8 *)((unsigned long)(port))) #define outb(val, port) writeb((val), (u8 *)((unsigned long)(port))) -#define inw(port) readw((u16 *)((port))) +#define inw(port) readw((u16 *)((unsigned long)(port))) #define outw(val, port) writew((val), (u16 *)((unsigned long)(port))) -#define inl(port) readl((u32 *)((port))) +#define inl(port) readl((u32 *)((unsigned long)(port))) #define outl(val, port) writel((val), (u32 *)((unsigned long)(port))) #define inb_p(port) inb((port)) -- cgit v0.10.2 From 35f079ebbc860dcd1cca70890c9c8d59c1145525 Mon Sep 17 00:00:00 2001 From: Nandita Dukkipati Date: Tue, 21 May 2013 15:12:07 +0000 Subject: tcp: bug fix in proportional rate reduction. This patch is a fix for a bug triggering newly_acked_sacked < 0 in tcp_ack(.). The bug is triggered by sacked_out decreasing relative to prior_sacked, but packets_out remaining the same as pior_packets. This is because the snapshot of prior_packets is taken after tcp_sacktag_write_queue() while prior_sacked is captured before tcp_sacktag_write_queue(). The problem is: tcp_sacktag_write_queue (tcp_match_skb_to_sack() -> tcp_fragment) adjusts the pcount for packets_out and sacked_out (MSS change or other reason). As a result, this delta in pcount is reflected in (prior_sacked - sacked_out) but not in (prior_packets - packets_out). This patch does the following: 1) initializes prior_packets at the start of tcp_ack() so as to capture the delta in packets_out created by tcp_fragment. 2) introduces a new "previous_packets_out" variable that snapshots packets_out right before tcp_clean_rtx_queue, so pkts_acked can be correctly computed as before. 3) Computes pkts_acked using previous_packets_out, and computes newly_acked_sacked using prior_packets. Signed-off-by: Nandita Dukkipati Acked-by: Yuchung Cheng Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 08bbe60..9c62257 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -2743,8 +2743,8 @@ static void tcp_process_loss(struct sock *sk, int flag, bool is_dupack) * tcp_xmit_retransmit_queue(). */ static void tcp_fastretrans_alert(struct sock *sk, int pkts_acked, - int prior_sacked, bool is_dupack, - int flag) + int prior_sacked, int prior_packets, + bool is_dupack, int flag) { struct inet_connection_sock *icsk = inet_csk(sk); struct tcp_sock *tp = tcp_sk(sk); @@ -2804,7 +2804,8 @@ static void tcp_fastretrans_alert(struct sock *sk, int pkts_acked, tcp_add_reno_sack(sk); } else do_lost = tcp_try_undo_partial(sk, pkts_acked); - newly_acked_sacked = pkts_acked + tp->sacked_out - prior_sacked; + newly_acked_sacked = prior_packets - tp->packets_out + + tp->sacked_out - prior_sacked; break; case TCP_CA_Loss: tcp_process_loss(sk, flag, is_dupack); @@ -2818,7 +2819,8 @@ static void tcp_fastretrans_alert(struct sock *sk, int pkts_acked, if (is_dupack) tcp_add_reno_sack(sk); } - newly_acked_sacked = pkts_acked + tp->sacked_out - prior_sacked; + newly_acked_sacked = prior_packets - tp->packets_out + + tp->sacked_out - prior_sacked; if (icsk->icsk_ca_state <= TCP_CA_Disorder) tcp_try_undo_dsack(sk); @@ -3330,9 +3332,10 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag) bool is_dupack = false; u32 prior_in_flight; u32 prior_fackets; - int prior_packets; + int prior_packets = tp->packets_out; int prior_sacked = tp->sacked_out; int pkts_acked = 0; + int previous_packets_out = 0; /* If the ack is older than previous acks * then we can probably ignore it. @@ -3403,14 +3406,14 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag) sk->sk_err_soft = 0; icsk->icsk_probes_out = 0; tp->rcv_tstamp = tcp_time_stamp; - prior_packets = tp->packets_out; if (!prior_packets) goto no_queue; /* See if we can take anything off of the retransmit queue. */ + previous_packets_out = tp->packets_out; flag |= tcp_clean_rtx_queue(sk, prior_fackets, prior_snd_una); - pkts_acked = prior_packets - tp->packets_out; + pkts_acked = previous_packets_out - tp->packets_out; if (tcp_ack_is_dubious(sk, flag)) { /* Advance CWND, if state allows this. */ @@ -3418,7 +3421,7 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag) tcp_cong_avoid(sk, ack, prior_in_flight); is_dupack = !(flag & (FLAG_SND_UNA_ADVANCED | FLAG_NOT_DUP)); tcp_fastretrans_alert(sk, pkts_acked, prior_sacked, - is_dupack, flag); + prior_packets, is_dupack, flag); } else { if (flag & FLAG_DATA_ACKED) tcp_cong_avoid(sk, ack, prior_in_flight); @@ -3441,7 +3444,7 @@ no_queue: /* If data was DSACKed, see if we can undo a cwnd reduction. */ if (flag & FLAG_DSACKING_ACK) tcp_fastretrans_alert(sk, pkts_acked, prior_sacked, - is_dupack, flag); + prior_packets, is_dupack, flag); /* If this ack opens up a zero window, clear backoff. It was * being used to time the probes, and is probably far higher than * it needs to be for normal retransmission. @@ -3464,7 +3467,7 @@ old_ack: if (TCP_SKB_CB(skb)->sacked) { flag |= tcp_sacktag_write_queue(sk, skb, prior_snd_una); tcp_fastretrans_alert(sk, pkts_acked, prior_sacked, - is_dupack, flag); + prior_packets, is_dupack, flag); } SOCK_DEBUG(sk, "Ack %u before %u:%u\n", ack, tp->snd_una, tp->snd_nxt); -- cgit v0.10.2 From e4166625edfd2d808ddda00c7e7e901f4f3b8cc0 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Tue, 21 May 2013 20:03:58 +0000 Subject: virtio_net: enable napi for all possible queues during open Commit 55257d72bd1c51f25106350f4983ec19f62ed1fa (virtio-net: fill only rx queues which are being used) only does the napi enabling during open for curr_queue_pairs. This will break multiqueue receiving since napi of new queues were still disabled after changing the number of queues. This patch fixes this by enabling napi for all possible queues during open. Cc: Sasha Levin Signed-off-by: Jason Wang Acked-by: Rusty Russell Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 655bb25..c9e0038 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -636,10 +636,11 @@ static int virtnet_open(struct net_device *dev) struct virtnet_info *vi = netdev_priv(dev); int i; - for (i = 0; i < vi->curr_queue_pairs; i++) { - /* Make sure we have some buffers: if oom use wq. */ - if (!try_fill_recv(&vi->rq[i], GFP_KERNEL)) - schedule_delayed_work(&vi->refill, 0); + for (i = 0; i < vi->max_queue_pairs; i++) { + if (i < vi->curr_queue_pairs) + /* Make sure we have some buffers: if oom use wq. */ + if (!try_fill_recv(&vi->rq[i], GFP_KERNEL)) + schedule_delayed_work(&vi->refill, 0); virtnet_napi_enable(&vi->rq[i]); } -- cgit v0.10.2 From ad06156876c0e55a01e13e1f2dd5c7f9262b1dfa Mon Sep 17 00:00:00 2001 From: Matthijs Kooijman Date: Wed, 8 May 2013 12:59:04 +0200 Subject: kbuild: Don't assume dts files live in arch/*/boot/dts In commit b40b25ff (kbuild: always run gcc -E on *.dts, remove cmd_dtc_cpp), dts building was changed to always use the C preprocessor. This meant that the .dts file passed to dtc is not the original, but the preprocessed one. When compiling with a separate build directory (i.e., with O=), this preprocessed file will not live in the same directory as the original. When the .dts file includes .dtsi files, dtc will look for them in the build directory, not in the source directory and compilation will fail. The commit referenced above tried to fix this by passing arch/*/boot/dts as an include path to dtc. However, for mips, the .dts files are not in this directory, so dts compilation on mips breaks for some targets. Instead of hardcoding this particular include path, this commit just uses the directory of the .dts file that is being compiled, which effectively restores the previous behaviour wrt includes. For most .dts files, this path is just the same as the previous hardcoded arch/*/boot/dts path. This was tested on a mips (rt3052) and an arm (bcm2835) target. Signed-off-by: Matthijs Kooijman Reviewed-by: Stephen Warren Signed-off-by: Michal Marek diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 51bb3de..8337663 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -264,7 +264,7 @@ $(obj)/%.dtb.S: $(obj)/%.dtb quiet_cmd_dtc = DTC $@ cmd_dtc = $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \ $(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 \ - -i $(srctree)/arch/$(SRCARCH)/boot/dts $(DTC_FLAGS) \ + -i $(dir $<) $(DTC_FLAGS) \ -d $(depfile).dtc $(dtc-tmp) ; \ cat $(depfile).pre $(depfile).dtc > $(depfile) -- cgit v0.10.2 From be8a6d452bda4b1b842e81a99bb86f77a1cb8279 Mon Sep 17 00:00:00 2001 From: David Daney Date: Wed, 22 May 2013 21:27:22 +0000 Subject: MIPS: Remove duplicate definition of check_for_high_segbits. In C, one definition is sufficient. Signed-off-by: David Daney Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5304/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index ce9818e..afeef93 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -301,10 +301,6 @@ static u32 tlb_handler[128] __cpuinitdata; static struct uasm_label labels[128] __cpuinitdata; static struct uasm_reloc relocs[128] __cpuinitdata; -#ifdef CONFIG_64BIT -static int check_for_high_segbits __cpuinitdata; -#endif - static int check_for_high_segbits __cpuinitdata; static unsigned int kscratch_used_mask __cpuinitdata; -- cgit v0.10.2 From 8f657933a3c2086d4731350c98f91a990783c0d3 Mon Sep 17 00:00:00 2001 From: David Daney Date: Wed, 22 May 2013 22:35:56 +0000 Subject: MIPS: Quit exposing Kconfig symbols in uapi headers. The kernel's struct pt_regs has many fields conditional on various Kconfig variables, we cannot be exporting this garbage to user-space. Move the kernel's definition to asm/ptrace.h, and put a uapi only version in uapi/asm/ptrace.h gated by #ifndef __KERNEL__ Signed-off-by: David Daney Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5305/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h index a3186f2..5e6cd09 100644 --- a/arch/mips/include/asm/ptrace.h +++ b/arch/mips/include/asm/ptrace.h @@ -16,6 +16,38 @@ #include #include +/* + * This struct defines the way the registers are stored on the stack during a + * system call/exception. As usual the registers k0/k1 aren't being saved. + */ +struct pt_regs { +#ifdef CONFIG_32BIT + /* Pad bytes for argument save space on the stack. */ + unsigned long pad0[6]; +#endif + + /* Saved main processor registers. */ + unsigned long regs[32]; + + /* Saved special registers. */ + unsigned long cp0_status; + unsigned long hi; + unsigned long lo; +#ifdef CONFIG_CPU_HAS_SMARTMIPS + unsigned long acx; +#endif + unsigned long cp0_badvaddr; + unsigned long cp0_cause; + unsigned long cp0_epc; +#ifdef CONFIG_MIPS_MT_SMTC + unsigned long cp0_tcstatus; +#endif /* CONFIG_MIPS_MT_SMTC */ +#ifdef CONFIG_CPU_CAVIUM_OCTEON + unsigned long long mpl[3]; /* MTM{0,1,2} */ + unsigned long long mtp[3]; /* MTP{0,1,2} */ +#endif +} __aligned(8); + struct task_struct; extern int ptrace_getregs(struct task_struct *child, __s64 __user *data); diff --git a/arch/mips/include/uapi/asm/ptrace.h b/arch/mips/include/uapi/asm/ptrace.h index 4d58d84..b26f7e3 100644 --- a/arch/mips/include/uapi/asm/ptrace.h +++ b/arch/mips/include/uapi/asm/ptrace.h @@ -22,16 +22,12 @@ #define DSP_CONTROL 77 #define ACX 78 +#ifndef __KERNEL__ /* * This struct defines the way the registers are stored on the stack during a * system call/exception. As usual the registers k0/k1 aren't being saved. */ struct pt_regs { -#ifdef CONFIG_32BIT - /* Pad bytes for argument save space on the stack. */ - unsigned long pad0[6]; -#endif - /* Saved main processor registers. */ unsigned long regs[32]; @@ -39,20 +35,11 @@ struct pt_regs { unsigned long cp0_status; unsigned long hi; unsigned long lo; -#ifdef CONFIG_CPU_HAS_SMARTMIPS - unsigned long acx; -#endif unsigned long cp0_badvaddr; unsigned long cp0_cause; unsigned long cp0_epc; -#ifdef CONFIG_MIPS_MT_SMTC - unsigned long cp0_tcstatus; -#endif /* CONFIG_MIPS_MT_SMTC */ -#ifdef CONFIG_CPU_CAVIUM_OCTEON - unsigned long long mpl[3]; /* MTM{0,1,2} */ - unsigned long long mtp[3]; /* MTP{0,1,2} */ -#endif } __attribute__ ((aligned (8))); +#endif /* __KERNEL__ */ /* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ #define PTRACE_GETREGS 12 -- cgit v0.10.2 From 497574c72c9922cf20c12aed15313c389f722fa0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Timo=20Ter=C3=A4s?= Date: Wed, 22 May 2013 01:40:47 +0000 Subject: xfrm: properly handle invalid states as an error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The error exit path needs err explicitly set. Otherwise it returns success and the only caller, xfrm_output_resume(), would oops in skb_dst(skb)->ops derefence as skb_dst(skb) is NULL. Bug introduced in commit bb65a9cb (xfrm: removes a superfluous check and add a statistic). Signed-off-by: Timo Teräs Cc: Li RongQing Cc: Steffen Klassert Signed-off-by: David S. Miller diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c index bcfda89..0cf003d 100644 --- a/net/xfrm/xfrm_output.c +++ b/net/xfrm/xfrm_output.c @@ -64,6 +64,7 @@ static int xfrm_output_one(struct sk_buff *skb, int err) if (unlikely(x->km.state != XFRM_STATE_VALID)) { XFRM_INC_STATS(net, LINUX_MIB_XFRMOUTSTATEINVALID); + err = -EINVAL; goto error; } -- cgit v0.10.2 From 3e87974dec5ec25a8a4852d9292db6be659164e6 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Wed, 22 May 2013 18:38:10 +0530 Subject: ARC: Brown paper bag bug in macro for checking cache color The VM_EXEC check in update_mmu_cache() was getting optimized away because of a stupid error in definition of macro addr_not_cache_congruent() The intention was to have the equivalent of following: if (a || (1 ? b : 0)) but we ended up with following: if (a || 1 ? b : 0) And because precedence of '||' is more that that of '?', gcc was optimizing away evaluation of Nasty Repercussions: 1. For non-aliasing configs it would mean some extraneous dcache flushes for non-code pages if U/K mappings were not congruent. 2. For aliasing config, some needed dcache flush for code pages might be missed if U/K mappings were congruent. Signed-off-by: Vineet Gupta diff --git a/arch/arc/include/asm/cacheflush.h b/arch/arc/include/asm/cacheflush.h index 9f841af..7d81974 100644 --- a/arch/arc/include/asm/cacheflush.h +++ b/arch/arc/include/asm/cacheflush.h @@ -99,8 +99,10 @@ static inline int cache_is_vipt_aliasing(void) * checks if two addresses (after page aligning) index into same cache set */ #define addr_not_cache_congruent(addr1, addr2) \ +({ \ cache_is_vipt_aliasing() ? \ - (CACHE_COLOR(addr1) != CACHE_COLOR(addr2)) : 0 \ + (CACHE_COLOR(addr1) != CACHE_COLOR(addr2)) : 0; \ +}) #define copy_to_user_page(vma, page, vaddr, dst, src, len) \ do { \ diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c index 066145b..fe1c5a0 100644 --- a/arch/arc/mm/tlb.c +++ b/arch/arc/mm/tlb.c @@ -444,7 +444,8 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned, * so userspace sees the right data. * (Avoids the flush for Non-exec + congruent mapping case) */ - if (vma->vm_flags & VM_EXEC || addr_not_cache_congruent(paddr, vaddr)) { + if ((vma->vm_flags & VM_EXEC) || + addr_not_cache_congruent(paddr, vaddr)) { struct page *page = pfn_to_page(pte_pfn(*ptep)); int dirty = test_and_clear_bit(PG_arch_1, &page->flags); -- cgit v0.10.2 From 006dfb3c9c44192f06093d65b3a876fa5ad1319a Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Sun, 19 May 2013 14:06:44 +0530 Subject: ARC: Use enough bits for determining page's cache color The current code uses 2 bits for determining page's dcache color, thus sorting pages into 4 bins, whereas the aliasing dcache really has 2 bins (8k page, 64k dcache - 4 way-set-assoc). This can cause extraneous flushes - e.g. color 0 and 2. Signed-off-by: Vineet Gupta diff --git a/arch/arc/include/asm/cacheflush.h b/arch/arc/include/asm/cacheflush.h index 7d81974..ef62682 100644 --- a/arch/arc/include/asm/cacheflush.h +++ b/arch/arc/include/asm/cacheflush.h @@ -93,7 +93,7 @@ static inline int cache_is_vipt_aliasing(void) #endif } -#define CACHE_COLOR(addr) (((unsigned long)(addr) >> (PAGE_SHIFT)) & 3) +#define CACHE_COLOR(addr) (((unsigned long)(addr) >> (PAGE_SHIFT)) & 1) /* * checks if two addresses (after page aligning) index into same cache set -- cgit v0.10.2 From 591a0ac7f14aae6bf11b1cb6b5a68480bd644ddb Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 23 May 2013 12:07:50 +0300 Subject: OMAPDSS: Fix crash with DT boot When booting with DT, there's a crash when omapfb is probed. This is caused by the fact that omapdss+DT is not yet supported, and thus omapdss is not probed at all. On the other hand, omapfb is always probed. When omapfb tries to use omapdss, there's a NULL pointer dereference crash. The same error should most likely happen with omapdrm and omap_vout also. To fix this, add an "initialized" state to omapdss. When omapdss has been probed, it's marked as initialized. omapfb, omapdrm and omap_vout check this state when they are probed to see that omapdss is actually there. Signed-off-by: Tomi Valkeinen Tested-by: Peter Ujfalusi diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c index 079c54c..902074b 100644 --- a/drivers/gpu/drm/omapdrm/omap_drv.c +++ b/drivers/gpu/drm/omapdrm/omap_drv.c @@ -548,6 +548,9 @@ static void pdev_shutdown(struct platform_device *device) static int pdev_probe(struct platform_device *device) { + if (omapdss_is_initialized() == false) + return -EPROBE_DEFER; + DBG("%s", device->name); return drm_platform_init(&omap_drm_driver, device); } diff --git a/drivers/media/platform/omap/omap_vout.c b/drivers/media/platform/omap/omap_vout.c index 96c4a17..0a489bd 100644 --- a/drivers/media/platform/omap/omap_vout.c +++ b/drivers/media/platform/omap/omap_vout.c @@ -2144,6 +2144,9 @@ static int __init omap_vout_probe(struct platform_device *pdev) struct omap_dss_device *def_display; struct omap2video_device *vid_dev = NULL; + if (omapdss_is_initialized() == false) + return -EPROBE_DEFER; + ret = omapdss_compat_init(); if (ret) { dev_err(&pdev->dev, "failed to init dss\n"); diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c index f8779d4..f49ddb9 100644 --- a/drivers/video/omap2/dss/core.c +++ b/drivers/video/omap2/dss/core.c @@ -53,6 +53,8 @@ static char *def_disp_name; module_param_named(def_disp, def_disp_name, charp, 0); MODULE_PARM_DESC(def_disp, "default display name"); +static bool dss_initialized; + const char *omapdss_get_default_display_name(void) { return core.default_display_name; @@ -66,6 +68,12 @@ enum omapdss_version omapdss_get_version(void) } EXPORT_SYMBOL(omapdss_get_version); +bool omapdss_is_initialized(void) +{ + return dss_initialized; +} +EXPORT_SYMBOL(omapdss_is_initialized); + struct platform_device *dss_get_core_pdev(void) { return core.pdev; @@ -606,6 +614,8 @@ static int __init omap_dss_init(void) return r; } + dss_initialized = true; + return 0; } @@ -636,7 +646,15 @@ static int __init omap_dss_init(void) static int __init omap_dss_init2(void) { - return omap_dss_register_drivers(); + int r; + + r = omap_dss_register_drivers(); + if (r) + return r; + + dss_initialized = true; + + return 0; } core_initcall(omap_dss_init); diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c index 717f13a..bb5f9fe 100644 --- a/drivers/video/omap2/omapfb/omapfb-main.c +++ b/drivers/video/omap2/omapfb/omapfb-main.c @@ -2416,6 +2416,9 @@ static int __init omapfb_probe(struct platform_device *pdev) DBG("omapfb_probe\n"); + if (omapdss_is_initialized() == false) + return -EPROBE_DEFER; + if (pdev->num_resources != 0) { dev_err(&pdev->dev, "probed for an unknown device\n"); r = -ENODEV; diff --git a/include/video/omapdss.h b/include/video/omapdss.h index caefa09..9b52340 100644 --- a/include/video/omapdss.h +++ b/include/video/omapdss.h @@ -741,6 +741,7 @@ struct omap_dss_driver { }; enum omapdss_version omapdss_get_version(void); +bool omapdss_is_initialized(void); int omap_dss_register_driver(struct omap_dss_driver *); void omap_dss_unregister_driver(struct omap_dss_driver *); -- cgit v0.10.2 From 2a7851bffb008ff4882eee673da74718997b4265 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 17 May 2013 03:56:10 +0000 Subject: netfilter: add nf_ipv6_ops hook to fix xt_addrtype with IPv6 Quoting https://bugzilla.netfilter.org/show_bug.cgi?id=812: [ ip6tables -m addrtype ] When I tried to use in the nat/PREROUTING it messes up the routing cache even if the rule didn't matched at all. [..] If I remove the --limit-iface-in from the non-working scenario, so just use the -m addrtype --dst-type LOCAL it works! This happens when LOCAL type matching is requested with --limit-iface-in, and the default ipv6 route is via the interface the packet we test arrived on. Because xt_addrtype uses ip6_route_output, the ipv6 routing implementation creates an unwanted cached entry, and the packet won't make it to the real/expected destination. Silently ignoring --limit-iface-in makes the routing work but it breaks rule matching (--dst-type LOCAL with limit-iface-in is supposed to only match if the dst address is configured on the incoming interface; without --limit-iface-in it will match if the address is reachable via lo). The test should call ipv6_chk_addr() instead. However, this would add a link-time dependency on ipv6. There are two possible solutions: 1) Revert the commit that moved ipt_addrtype to xt_addrtype, and put ipv6 specific code into ip6t_addrtype. 2) add new "nf_ipv6_ops" struct to register pointers to ipv6 functions. While the former might seem preferable, Pablo pointed out that there are more xt modules with link-time dependeny issues regarding ipv6, so lets go for 2). Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h index 98ffb54..2d4df6ce 100644 --- a/include/linux/netfilter_ipv6.h +++ b/include/linux/netfilter_ipv6.h @@ -17,6 +17,22 @@ extern __sum16 nf_ip6_checksum(struct sk_buff *skb, unsigned int hook, extern int ipv6_netfilter_init(void); extern void ipv6_netfilter_fini(void); + +/* + * Hook functions for ipv6 to allow xt_* modules to be built-in even + * if IPv6 is a module. + */ +struct nf_ipv6_ops { + int (*chk_addr)(struct net *net, const struct in6_addr *addr, + const struct net_device *dev, int strict); +}; + +extern const struct nf_ipv6_ops __rcu *nf_ipv6_ops; +static inline const struct nf_ipv6_ops *nf_get_ipv6_ops(void) +{ + return rcu_dereference(nf_ipv6_ops); +} + #else /* CONFIG_NETFILTER */ static inline int ipv6_netfilter_init(void) { return 0; } static inline void ipv6_netfilter_fini(void) { return; } diff --git a/include/net/addrconf.h b/include/net/addrconf.h index 84a6440..21f70270 100644 --- a/include/net/addrconf.h +++ b/include/net/addrconf.h @@ -65,7 +65,7 @@ extern int addrconf_set_dstaddr(struct net *net, extern int ipv6_chk_addr(struct net *net, const struct in6_addr *addr, - struct net_device *dev, + const struct net_device *dev, int strict); #if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index d1ab6ab..d1b2d80 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -1487,7 +1487,7 @@ static int ipv6_count_addresses(struct inet6_dev *idev) } int ipv6_chk_addr(struct net *net, const struct in6_addr *addr, - struct net_device *dev, int strict) + const struct net_device *dev, int strict) { struct inet6_ifaddr *ifp; unsigned int hash = inet6_addr_hash(addr); diff --git a/net/ipv6/netfilter.c b/net/ipv6/netfilter.c index 72836f4..95f3f1d 100644 --- a/net/ipv6/netfilter.c +++ b/net/ipv6/netfilter.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -186,6 +187,10 @@ static __sum16 nf_ip6_checksum_partial(struct sk_buff *skb, unsigned int hook, return csum; }; +static const struct nf_ipv6_ops ipv6ops = { + .chk_addr = ipv6_chk_addr, +}; + static const struct nf_afinfo nf_ip6_afinfo = { .family = AF_INET6, .checksum = nf_ip6_checksum, @@ -198,6 +203,7 @@ static const struct nf_afinfo nf_ip6_afinfo = { int __init ipv6_netfilter_init(void) { + RCU_INIT_POINTER(nf_ipv6_ops, &ipv6ops); return nf_register_afinfo(&nf_ip6_afinfo); } @@ -206,5 +212,6 @@ int __init ipv6_netfilter_init(void) */ void ipv6_netfilter_fini(void) { + RCU_INIT_POINTER(nf_ipv6_ops, NULL); nf_unregister_afinfo(&nf_ip6_afinfo); } diff --git a/net/netfilter/core.c b/net/netfilter/core.c index 07c865a..857ca9f 100644 --- a/net/netfilter/core.c +++ b/net/netfilter/core.c @@ -30,6 +30,8 @@ static DEFINE_MUTEX(afinfo_mutex); const struct nf_afinfo __rcu *nf_afinfo[NFPROTO_NUMPROTO] __read_mostly; EXPORT_SYMBOL(nf_afinfo); +const struct nf_ipv6_ops __rcu *nf_ipv6_ops __read_mostly; +EXPORT_SYMBOL_GPL(nf_ipv6_ops); int nf_register_afinfo(const struct nf_afinfo *afinfo) { diff --git a/net/netfilter/xt_addrtype.c b/net/netfilter/xt_addrtype.c index 49c5ff7..68ff29f 100644 --- a/net/netfilter/xt_addrtype.c +++ b/net/netfilter/xt_addrtype.c @@ -22,6 +22,7 @@ #include #endif +#include #include #include @@ -33,12 +34,12 @@ MODULE_ALIAS("ip6t_addrtype"); #if IS_ENABLED(CONFIG_IP6_NF_IPTABLES) static u32 match_lookup_rt6(struct net *net, const struct net_device *dev, - const struct in6_addr *addr) + const struct in6_addr *addr, u16 mask) { const struct nf_afinfo *afinfo; struct flowi6 flow; struct rt6_info *rt; - u32 ret; + u32 ret = 0; int route_err; memset(&flow, 0, sizeof(flow)); @@ -49,12 +50,19 @@ static u32 match_lookup_rt6(struct net *net, const struct net_device *dev, rcu_read_lock(); afinfo = nf_get_afinfo(NFPROTO_IPV6); - if (afinfo != NULL) + if (afinfo != NULL) { + const struct nf_ipv6_ops *v6ops; + + if (dev && (mask & XT_ADDRTYPE_LOCAL)) { + v6ops = nf_get_ipv6_ops(); + if (v6ops && v6ops->chk_addr(net, addr, dev, true)) + ret = XT_ADDRTYPE_LOCAL; + } route_err = afinfo->route(net, (struct dst_entry **)&rt, - flowi6_to_flowi(&flow), !!dev); - else + flowi6_to_flowi(&flow), false); + } else { route_err = 1; - + } rcu_read_unlock(); if (route_err) @@ -62,15 +70,12 @@ static u32 match_lookup_rt6(struct net *net, const struct net_device *dev, if (rt->rt6i_flags & RTF_REJECT) ret = XT_ADDRTYPE_UNREACHABLE; - else - ret = 0; - if (rt->rt6i_flags & RTF_LOCAL) + if (dev == NULL && rt->rt6i_flags & RTF_LOCAL) ret |= XT_ADDRTYPE_LOCAL; if (rt->rt6i_flags & RTF_ANYCAST) ret |= XT_ADDRTYPE_ANYCAST; - dst_release(&rt->dst); return ret; } @@ -90,7 +95,7 @@ static bool match_type6(struct net *net, const struct net_device *dev, if ((XT_ADDRTYPE_LOCAL | XT_ADDRTYPE_ANYCAST | XT_ADDRTYPE_UNREACHABLE) & mask) - return !!(mask & match_lookup_rt6(net, dev, addr)); + return !!(mask & match_lookup_rt6(net, dev, addr, mask)); return true; } -- cgit v0.10.2 From c5cca97fb915a90b1dcddf737062e67dd8656af8 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Wed, 22 May 2013 11:48:40 +0900 Subject: drm/exynos: use drm_send_vblank_event() helper Rebased. Signed-off-by: Rob Clark Signed-off-by: Inki Dae diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c index 02b3608..db3decf 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c @@ -397,7 +397,6 @@ void exynos_drm_crtc_finish_pageflip(struct drm_device *dev, int crtc) { struct exynos_drm_private *dev_priv = dev->dev_private; struct drm_pending_vblank_event *e, *t; - struct timeval now; unsigned long flags; DRM_DEBUG_KMS("%s\n", __FILE__); @@ -410,13 +409,8 @@ void exynos_drm_crtc_finish_pageflip(struct drm_device *dev, int crtc) if (crtc != e->pipe) continue; - do_gettimeofday(&now); - e->event.sequence = 0; - e->event.tv_sec = now.tv_sec; - e->event.tv_usec = now.tv_usec; - - list_move_tail(&e->base.link, &e->base.file_priv->event_list); - wake_up_interruptible(&e->base.file_priv->event_wait); + list_del(&e->base.link); + drm_send_vblank_event(dev, -1, e); drm_vblank_put(dev, crtc); } -- cgit v0.10.2 From 20cd2640a295cab46bcd08f4788984ca236fc148 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Tue, 21 May 2013 16:55:58 +0900 Subject: drm/exynos: wait for the completion of pending page flip This patch fixes the issue that drm_vblank_get() is failed. The issus occurs when next page flip request is tried if previous page flip event wasn't completed yet and then dpms became off. So this patch make sure that page flip event is completed before dpms goes to off. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c index db3decf..c200e4d 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c @@ -48,6 +48,8 @@ struct exynos_drm_crtc { unsigned int pipe; unsigned int dpms; enum exynos_crtc_mode mode; + wait_queue_head_t pending_flip_queue; + atomic_t pending_flip; }; static void exynos_drm_crtc_dpms(struct drm_crtc *crtc, int mode) @@ -61,6 +63,13 @@ static void exynos_drm_crtc_dpms(struct drm_crtc *crtc, int mode) return; } + if (mode > DRM_MODE_DPMS_ON) { + /* wait for the completion of page flip. */ + wait_event(exynos_crtc->pending_flip_queue, + atomic_read(&exynos_crtc->pending_flip) == 0); + drm_vblank_off(crtc->dev, exynos_crtc->pipe); + } + exynos_drm_fn_encoder(crtc, &mode, exynos_drm_encoder_crtc_dpms); exynos_crtc->dpms = mode; } @@ -224,6 +233,7 @@ static int exynos_drm_crtc_page_flip(struct drm_crtc *crtc, spin_lock_irq(&dev->event_lock); list_add_tail(&event->base.link, &dev_priv->pageflip_event_list); + atomic_set(&exynos_crtc->pending_flip, 1); spin_unlock_irq(&dev->event_lock); crtc->fb = fb; @@ -343,6 +353,8 @@ int exynos_drm_crtc_create(struct drm_device *dev, unsigned int nr) exynos_crtc->pipe = nr; exynos_crtc->dpms = DRM_MODE_DPMS_OFF; + init_waitqueue_head(&exynos_crtc->pending_flip_queue); + atomic_set(&exynos_crtc->pending_flip, 0); exynos_crtc->plane = exynos_plane_init(dev, 1 << nr, true); if (!exynos_crtc->plane) { kfree(exynos_crtc); @@ -397,6 +409,8 @@ void exynos_drm_crtc_finish_pageflip(struct drm_device *dev, int crtc) { struct exynos_drm_private *dev_priv = dev->dev_private; struct drm_pending_vblank_event *e, *t; + struct drm_crtc *drm_crtc = dev_priv->crtc[crtc]; + struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(drm_crtc); unsigned long flags; DRM_DEBUG_KMS("%s\n", __FILE__); @@ -412,6 +426,8 @@ void exynos_drm_crtc_finish_pageflip(struct drm_device *dev, int crtc) list_del(&e->base.link); drm_send_vblank_event(dev, -1, e); drm_vblank_put(dev, crtc); + atomic_set(&exynos_crtc->pending_flip, 0); + wake_up(&exynos_crtc->pending_flip_queue); } spin_unlock_irqrestore(&dev->event_lock, flags); -- cgit v0.10.2 From d873ab99acd23dcd6860d8e605bc3146a4d4d9a2 Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Wed, 22 May 2013 21:14:14 +0900 Subject: drm/exynos: cleanup device pointer usages Struct device pointer got from platform device pointer is already alsigned as variable, but some functions do not use device pointer. So this patch replaces thoes usages. Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimc.c b/drivers/gpu/drm/exynos/exynos_drm_fimc.c index 773f583..754d760 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimc.c @@ -1884,7 +1884,7 @@ static int fimc_probe(struct platform_device *pdev) goto err_pm_dis; } - dev_info(&pdev->dev, "drm fimc registered successfully.\n"); + dev_info(dev, "drm fimc registered successfully.\n"); return 0; diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 746b282..97c61db 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -885,7 +885,7 @@ static int fimd_probe(struct platform_device *pdev) DRM_DEBUG_KMS("%s\n", __FILE__); - if (pdev->dev.of_node) { + if (dev->of_node) { pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) { DRM_ERROR("memory allocation for pdata failed\n"); @@ -899,7 +899,7 @@ static int fimd_probe(struct platform_device *pdev) return ret; } } else { - pdata = pdev->dev.platform_data; + pdata = dev->platform_data; if (!pdata) { DRM_ERROR("no platform data specified\n"); return -EINVAL; @@ -912,7 +912,7 @@ static int fimd_probe(struct platform_device *pdev) return -EINVAL; } - ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) return -ENOMEM; @@ -930,7 +930,7 @@ static int fimd_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - ctx->regs = devm_ioremap_resource(&pdev->dev, res); + ctx->regs = devm_ioremap_resource(dev, res); if (IS_ERR(ctx->regs)) return PTR_ERR(ctx->regs); @@ -942,7 +942,7 @@ static int fimd_probe(struct platform_device *pdev) ctx->irq = res->start; - ret = devm_request_irq(&pdev->dev, ctx->irq, fimd_irq_handler, + ret = devm_request_irq(dev, ctx->irq, fimd_irq_handler, 0, "drm_fimd", ctx); if (ret) { dev_err(dev, "irq request failed.\n"); diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c index 47a493c..af75434 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c +++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c @@ -1379,7 +1379,7 @@ static int g2d_probe(struct platform_device *pdev) struct exynos_drm_subdrv *subdrv; int ret; - g2d = devm_kzalloc(&pdev->dev, sizeof(*g2d), GFP_KERNEL); + g2d = devm_kzalloc(dev, sizeof(*g2d), GFP_KERNEL); if (!g2d) { dev_err(dev, "failed to allocate driver data\n"); return -ENOMEM; @@ -1417,7 +1417,7 @@ static int g2d_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - g2d->regs = devm_ioremap_resource(&pdev->dev, res); + g2d->regs = devm_ioremap_resource(dev, res); if (IS_ERR(g2d->regs)) { ret = PTR_ERR(g2d->regs); goto err_put_clk; @@ -1430,7 +1430,7 @@ static int g2d_probe(struct platform_device *pdev) goto err_put_clk; } - ret = devm_request_irq(&pdev->dev, g2d->irq, g2d_irq_handler, 0, + ret = devm_request_irq(dev, g2d->irq, g2d_irq_handler, 0, "drm_g2d", g2d); if (ret < 0) { dev_err(dev, "irq request failed\n"); diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.c b/drivers/gpu/drm/exynos/exynos_drm_gsc.c index 7841c3b..487595a 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gsc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.c @@ -1743,7 +1743,7 @@ static int gsc_probe(struct platform_device *pdev) goto err_ippdrv_register; } - dev_info(&pdev->dev, "drm gsc registered successfully.\n"); + dev_info(dev, "drm gsc registered successfully.\n"); return 0; diff --git a/drivers/gpu/drm/exynos/exynos_drm_hdmi.c b/drivers/gpu/drm/exynos/exynos_drm_hdmi.c index ba2f0f1..437fb94 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_hdmi.c @@ -442,7 +442,7 @@ static int exynos_drm_hdmi_probe(struct platform_device *pdev) DRM_DEBUG_KMS("%s\n", __FILE__); - ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) { DRM_LOG_KMS("failed to alloc common hdmi context.\n"); return -ENOMEM; diff --git a/drivers/gpu/drm/exynos/exynos_drm_ipp.c b/drivers/gpu/drm/exynos/exynos_drm_ipp.c index 5c4764a..be1e884 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_ipp.c +++ b/drivers/gpu/drm/exynos/exynos_drm_ipp.c @@ -1909,7 +1909,7 @@ static int ipp_probe(struct platform_device *pdev) struct exynos_drm_subdrv *subdrv; int ret; - ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) return -ENOMEM; @@ -1963,7 +1963,7 @@ static int ipp_probe(struct platform_device *pdev) goto err_cmd_workq; } - dev_info(&pdev->dev, "drm ipp registered successfully.\n"); + dev_info(dev, "drm ipp registered successfully.\n"); return 0; diff --git a/drivers/gpu/drm/exynos/exynos_drm_vidi.c b/drivers/gpu/drm/exynos/exynos_drm_vidi.c index 9504b0c..24376c1 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_vidi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_vidi.c @@ -594,7 +594,7 @@ static int vidi_probe(struct platform_device *pdev) DRM_DEBUG_KMS("%s\n", __FILE__); - ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) return -ENOMEM; @@ -612,7 +612,7 @@ static int vidi_probe(struct platform_device *pdev) platform_set_drvdata(pdev, ctx); - ret = device_create_file(&pdev->dev, &dev_attr_connection); + ret = device_create_file(dev, &dev_attr_connection); if (ret < 0) DRM_INFO("failed to create connection sysfs.\n"); diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index 7e99853..8d5dcd1 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -1946,14 +1946,14 @@ static int hdmi_probe(struct platform_device *pdev) DRM_DEBUG_KMS("[%d]\n", __LINE__); - if (pdev->dev.of_node) { + if (dev->of_node) { pdata = drm_hdmi_dt_parse_pdata(dev); if (IS_ERR(pdata)) { DRM_ERROR("failed to parse dt\n"); return PTR_ERR(pdata); } } else { - pdata = pdev->dev.platform_data; + pdata = dev->platform_data; } if (!pdata) { @@ -1961,14 +1961,14 @@ static int hdmi_probe(struct platform_device *pdev) return -EINVAL; } - drm_hdmi_ctx = devm_kzalloc(&pdev->dev, sizeof(*drm_hdmi_ctx), + drm_hdmi_ctx = devm_kzalloc(dev, sizeof(*drm_hdmi_ctx), GFP_KERNEL); if (!drm_hdmi_ctx) { DRM_ERROR("failed to allocate common hdmi context.\n"); return -ENOMEM; } - hdata = devm_kzalloc(&pdev->dev, sizeof(struct hdmi_context), + hdata = devm_kzalloc(dev, sizeof(struct hdmi_context), GFP_KERNEL); if (!hdata) { DRM_ERROR("out of memory\n"); @@ -1985,7 +1985,7 @@ static int hdmi_probe(struct platform_device *pdev) if (dev->of_node) { const struct of_device_id *match; match = of_match_node(of_match_ptr(hdmi_match_types), - pdev->dev.of_node); + dev->of_node); if (match == NULL) return -ENODEV; hdata->type = (enum hdmi_type)match->data; @@ -2010,11 +2010,11 @@ static int hdmi_probe(struct platform_device *pdev) return -ENOENT; } - hdata->regs = devm_ioremap_resource(&pdev->dev, res); + hdata->regs = devm_ioremap_resource(dev, res); if (IS_ERR(hdata->regs)) return PTR_ERR(hdata->regs); - ret = devm_gpio_request(&pdev->dev, hdata->hpd_gpio, "HPD"); + ret = devm_gpio_request(dev, hdata->hpd_gpio, "HPD"); if (ret) { DRM_ERROR("failed to request HPD gpio\n"); return ret; diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index ec3e376..7c197d38 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -1061,7 +1061,7 @@ static int mixer_resources_init(struct exynos_drm_hdmi_context *ctx, return -ENXIO; } - mixer_res->mixer_regs = devm_ioremap(&pdev->dev, res->start, + mixer_res->mixer_regs = devm_ioremap(dev, res->start, resource_size(res)); if (mixer_res->mixer_regs == NULL) { dev_err(dev, "register mapping failed.\n"); @@ -1074,7 +1074,7 @@ static int mixer_resources_init(struct exynos_drm_hdmi_context *ctx, return -ENXIO; } - ret = devm_request_irq(&pdev->dev, res->start, mixer_irq_handler, + ret = devm_request_irq(dev, res->start, mixer_irq_handler, 0, "drm_mixer", ctx); if (ret) { dev_err(dev, "request interrupt failed.\n"); @@ -1118,7 +1118,7 @@ static int vp_resources_init(struct exynos_drm_hdmi_context *ctx, return -ENXIO; } - mixer_res->vp_regs = devm_ioremap(&pdev->dev, res->start, + mixer_res->vp_regs = devm_ioremap(dev, res->start, resource_size(res)); if (mixer_res->vp_regs == NULL) { dev_err(dev, "register mapping failed.\n"); @@ -1169,14 +1169,14 @@ static int mixer_probe(struct platform_device *pdev) dev_info(dev, "probe start\n"); - drm_hdmi_ctx = devm_kzalloc(&pdev->dev, sizeof(*drm_hdmi_ctx), + drm_hdmi_ctx = devm_kzalloc(dev, sizeof(*drm_hdmi_ctx), GFP_KERNEL); if (!drm_hdmi_ctx) { DRM_ERROR("failed to allocate common hdmi context.\n"); return -ENOMEM; } - ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) { DRM_ERROR("failed to alloc mixer context.\n"); return -ENOMEM; @@ -1187,14 +1187,14 @@ static int mixer_probe(struct platform_device *pdev) if (dev->of_node) { const struct of_device_id *match; match = of_match_node(of_match_ptr(mixer_match_types), - pdev->dev.of_node); + dev->of_node); drv = (struct mixer_drv_data *)match->data; } else { drv = (struct mixer_drv_data *) platform_get_device_id(pdev)->driver_data; } - ctx->dev = &pdev->dev; + ctx->dev = dev; ctx->parent_ctx = (void *)drm_hdmi_ctx; drm_hdmi_ctx->ctx = (void *)ctx; ctx->vp_enabled = drv->is_vp_enabled; -- cgit v0.10.2 From a3ad6976fe5a306fc6cb9e423ac0ef2f06f79189 Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Wed, 22 May 2013 21:14:15 +0900 Subject: drm/exynos: fix build warnings from ipp fimc Becuase of order of headers, there are build warnings and they are fixed with this patch. Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimc.c b/drivers/gpu/drm/exynos/exynos_drm_fimc.c index 754d760..75c50f5 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimc.c @@ -12,9 +12,9 @@ * */ #include -#include #include #include +#include #include #include #include -- cgit v0.10.2 From 7a1b00e0728ff20d6c8e2d6335da05d13d03ef74 Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Wed, 22 May 2013 21:14:16 +0900 Subject: drm/exynos: remove unnecessary devm_kfree devm_kfree does not need for fail case of probe function and for remove function. Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.c b/drivers/gpu/drm/exynos/exynos_drm_gsc.c index 487595a..98032d6 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gsc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.c @@ -1748,7 +1748,6 @@ static int gsc_probe(struct platform_device *pdev) return 0; err_ippdrv_register: - devm_kfree(dev, ippdrv->prop_list); pm_runtime_disable(dev); err_get_irq: free_irq(ctx->irq, ctx); @@ -1761,7 +1760,6 @@ static int gsc_remove(struct platform_device *pdev) struct gsc_context *ctx = get_gsc_context(dev); struct exynos_drm_ippdrv *ippdrv = &ctx->ippdrv; - devm_kfree(dev, ippdrv->prop_list); exynos_drm_ippdrv_unregister(ippdrv); mutex_destroy(&ctx->lock); diff --git a/drivers/gpu/drm/exynos/exynos_drm_rotator.c b/drivers/gpu/drm/exynos/exynos_drm_rotator.c index 947f09f..3aa502a 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_rotator.c +++ b/drivers/gpu/drm/exynos/exynos_drm_rotator.c @@ -709,7 +709,6 @@ static int rotator_probe(struct platform_device *pdev) return 0; err_ippdrv_register: - devm_kfree(dev, ippdrv->prop_list); pm_runtime_disable(dev); err_clk_get: free_irq(rot->irq, rot); @@ -722,7 +721,6 @@ static int rotator_remove(struct platform_device *pdev) struct rot_context *rot = dev_get_drvdata(dev); struct exynos_drm_ippdrv *ippdrv = &rot->ippdrv; - devm_kfree(dev, ippdrv->prop_list); exynos_drm_ippdrv_unregister(ippdrv); pm_runtime_disable(dev); -- cgit v0.10.2 From dcb9a7c74acf59679a537e6fcc7a99c12353e7b8 Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Wed, 22 May 2013 21:14:17 +0900 Subject: drm/exynos: replace request_threaded_irq with devm function devm_request_threaded_irq is used instead of request_threaded_irq and free_irq is removed. Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimc.c b/drivers/gpu/drm/exynos/exynos_drm_fimc.c index 75c50f5..4a1616a 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimc.c @@ -1845,7 +1845,7 @@ static int fimc_probe(struct platform_device *pdev) } ctx->irq = res->start; - ret = request_threaded_irq(ctx->irq, NULL, fimc_irq_handler, + ret = devm_request_threaded_irq(dev, ctx->irq, NULL, fimc_irq_handler, IRQF_ONESHOT, "drm_fimc", ctx); if (ret < 0) { dev_err(dev, "failed to request irq.\n"); @@ -1854,7 +1854,7 @@ static int fimc_probe(struct platform_device *pdev) ret = fimc_setup_clocks(ctx); if (ret < 0) - goto err_free_irq; + return ret; ippdrv = &ctx->ippdrv; ippdrv->ops[EXYNOS_DRM_OPS_SRC] = &fimc_src_ops; @@ -1892,8 +1892,6 @@ err_pm_dis: pm_runtime_disable(dev); err_put_clk: fimc_put_clocks(ctx); -err_free_irq: - free_irq(ctx->irq, ctx); return ret; } @@ -1911,8 +1909,6 @@ static int fimc_remove(struct platform_device *pdev) pm_runtime_set_suspended(dev); pm_runtime_disable(dev); - free_irq(ctx->irq, ctx); - return 0; } diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.c b/drivers/gpu/drm/exynos/exynos_drm_gsc.c index 98032d6..762f40d 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gsc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.c @@ -1704,7 +1704,7 @@ static int gsc_probe(struct platform_device *pdev) } ctx->irq = res->start; - ret = request_threaded_irq(ctx->irq, NULL, gsc_irq_handler, + ret = devm_request_threaded_irq(dev, ctx->irq, NULL, gsc_irq_handler, IRQF_ONESHOT, "drm_gsc", ctx); if (ret < 0) { dev_err(dev, "failed to request irq.\n"); @@ -1725,7 +1725,7 @@ static int gsc_probe(struct platform_device *pdev) ret = gsc_init_prop_list(ippdrv); if (ret < 0) { dev_err(dev, "failed to init property list.\n"); - goto err_get_irq; + return ret; } DRM_DEBUG_KMS("%s:id[%d]ippdrv[0x%x]\n", __func__, ctx->id, @@ -1749,8 +1749,6 @@ static int gsc_probe(struct platform_device *pdev) err_ippdrv_register: pm_runtime_disable(dev); -err_get_irq: - free_irq(ctx->irq, ctx); return ret; } @@ -1766,8 +1764,6 @@ static int gsc_remove(struct platform_device *pdev) pm_runtime_set_suspended(dev); pm_runtime_disable(dev); - free_irq(ctx->irq, ctx); - return 0; } diff --git a/drivers/gpu/drm/exynos/exynos_drm_rotator.c b/drivers/gpu/drm/exynos/exynos_drm_rotator.c index 3aa502a..9b6c709 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_rotator.c +++ b/drivers/gpu/drm/exynos/exynos_drm_rotator.c @@ -666,8 +666,8 @@ static int rotator_probe(struct platform_device *pdev) return rot->irq; } - ret = request_threaded_irq(rot->irq, NULL, rotator_irq_handler, - IRQF_ONESHOT, "drm_rotator", rot); + ret = devm_request_threaded_irq(dev, rot->irq, NULL, + rotator_irq_handler, IRQF_ONESHOT, "drm_rotator", rot); if (ret < 0) { dev_err(dev, "failed to request irq\n"); return ret; @@ -676,8 +676,7 @@ static int rotator_probe(struct platform_device *pdev) rot->clock = devm_clk_get(dev, "rotator"); if (IS_ERR(rot->clock)) { dev_err(dev, "failed to get clock\n"); - ret = PTR_ERR(rot->clock); - goto err_clk_get; + return PTR_ERR(rot->clock); } pm_runtime_enable(dev); @@ -710,8 +709,6 @@ static int rotator_probe(struct platform_device *pdev) err_ippdrv_register: pm_runtime_disable(dev); -err_clk_get: - free_irq(rot->irq, rot); return ret; } @@ -725,8 +722,6 @@ static int rotator_remove(struct platform_device *pdev) pm_runtime_disable(dev); - free_irq(rot->irq, rot); - return 0; } diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index 8d5dcd1..2f78532 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -2046,7 +2046,7 @@ static int hdmi_probe(struct platform_device *pdev) hdata->hpd = gpio_get_value(hdata->hpd_gpio); - ret = request_threaded_irq(hdata->irq, NULL, + ret = devm_request_threaded_irq(dev, hdata->irq, NULL, hdmi_irq_thread, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "hdmi", drm_hdmi_ctx); @@ -2075,16 +2075,11 @@ err_ddc: static int hdmi_remove(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct exynos_drm_hdmi_context *ctx = platform_get_drvdata(pdev); - struct hdmi_context *hdata = ctx->ctx; DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__); pm_runtime_disable(dev); - free_irq(hdata->irq, ctx); - - /* hdmiphy i2c driver */ i2c_del_driver(&hdmiphy_driver); /* DDC i2c driver */ -- cgit v0.10.2 From 4f36ea6eed2081340c7a7aa98c73187ecfccebff Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Thu, 23 May 2013 01:50:46 +0000 Subject: netfilter: ipt_ULOG: fix non-null terminated string in the nf_log path If nf_log uses ipt_ULOG as logging output, we can deliver non-null terminated strings to user-space since the maximum length of the prefix that is passed by nf_log is NF_LOG_PREFIXLEN but pm->prefix is 32 bytes long (ULOG_PREFIX_LEN). This is actually happening already from nf_conntrack_tcp if ipt_ULOG is used, since it is passing strings longer than 32 bytes. Signed-off-by: Chen Gang Signed-off-by: Pablo Neira Ayuso diff --git a/net/ipv4/netfilter/ipt_ULOG.c b/net/ipv4/netfilter/ipt_ULOG.c index cf08218..ff4b781 100644 --- a/net/ipv4/netfilter/ipt_ULOG.c +++ b/net/ipv4/netfilter/ipt_ULOG.c @@ -231,8 +231,10 @@ static void ipt_ulog_packet(struct net *net, put_unaligned(tv.tv_usec, &pm->timestamp_usec); put_unaligned(skb->mark, &pm->mark); pm->hook = hooknum; - if (prefix != NULL) - strncpy(pm->prefix, prefix, sizeof(pm->prefix)); + if (prefix != NULL) { + strncpy(pm->prefix, prefix, sizeof(pm->prefix) - 1); + pm->prefix[sizeof(pm->prefix) - 1] = '\0'; + } else if (loginfo->prefix[0] != '\0') strncpy(pm->prefix, loginfo->prefix, sizeof(pm->prefix)); else -- cgit v0.10.2 From d47333ddb234dbc661ab2a4fe019758bd33ba33b Mon Sep 17 00:00:00 2001 From: Torsten Schenk Date: Thu, 23 May 2013 13:38:29 +0200 Subject: ALSA: usb-6fire: Modify firmware version check Check only the uppermost 16 bits instead of the whole 32 bits of the version information. Do this because all firmware version tested with this version information worked correctly and the strict check causes problems for several users. Signed-off-by: Torsten Schenk Signed-off-by: Takashi Iwai diff --git a/sound/usb/6fire/firmware.c b/sound/usb/6fire/firmware.c index a1d9b07..b9defcd 100644 --- a/sound/usb/6fire/firmware.c +++ b/sound/usb/6fire/firmware.c @@ -42,8 +42,8 @@ static const u8 ep_w_max_packet_size[] = { 0x94, 0x01, 0x5c, 0x02 /* alt 3: 404 EP2 and 604 EP6 (25 fpp) */ }; -static const u8 known_fw_versions[][4] = { - { 0x03, 0x01, 0x0b, 0x00 } +static const u8 known_fw_versions[][2] = { + { 0x03, 0x01 } }; struct ihex_record { @@ -343,7 +343,7 @@ static int usb6fire_fw_check(u8 *version) int i; for (i = 0; i < ARRAY_SIZE(known_fw_versions); i++) - if (!memcmp(version, known_fw_versions + i, 4)) + if (!memcmp(version, known_fw_versions + i, 2)) return 0; snd_printk(KERN_ERR PREFIX "invalid fimware version in device: %*ph. " -- cgit v0.10.2 From a9a6e7a09598013ff97e34ebd84c39d1f51f261a Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Thu, 23 May 2013 14:31:23 +0000 Subject: MIPS: Trap exception handling fixes 2a0b24f56c2492b932f1aed617ae80fb23500d21 broke Trap exception handling in the standard MIPS mode. Additionally the microMIPS-mode trap code mask is wrong, as it's a 4-bit field. Here's a fix. Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5309/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index e3be670..a75ae40 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -897,22 +897,24 @@ out_sigsegv: asmlinkage void do_tr(struct pt_regs *regs) { - unsigned int opcode, tcode = 0; + u32 opcode, tcode = 0; u16 instr[2]; - unsigned long epc = exception_epc(regs); + unsigned long epc = msk_isa16_mode(exception_epc(regs)); - if ((__get_user(instr[0], (u16 __user *)msk_isa16_mode(epc))) || - (__get_user(instr[1], (u16 __user *)msk_isa16_mode(epc + 2)))) + if (get_isa16_mode(regs->cp0_epc)) { + if (__get_user(instr[0], (u16 __user *)(epc + 0)) || + __get_user(instr[1], (u16 __user *)(epc + 2))) goto out_sigsegv; - opcode = (instr[0] << 16) | instr[1]; - - /* Immediate versions don't provide a code. */ - if (!(opcode & OPCODE)) { - if (get_isa16_mode(regs->cp0_epc)) - /* microMIPS */ - tcode = (opcode >> 12) & 0x1f; - else - tcode = ((opcode >> 6) & ((1 << 10) - 1)); + opcode = (instr[0] << 16) | instr[1]; + /* Immediate versions don't provide a code. */ + if (!(opcode & OPCODE)) + tcode = (opcode >> 12) & ((1 << 4) - 1); + } else { + if (__get_user(opcode, (u32 __user *)epc)) + goto out_sigsegv; + /* Immediate versions don't provide a code. */ + if (!(opcode & OPCODE)) + tcode = (opcode >> 6) & ((1 << 10) - 1); } do_trap_or_bp(regs, tcode, "Trap"); -- cgit v0.10.2 From ca1643186d3dce6171d8f171e516b02496360a9e Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Red Hat)" Date: Thu, 23 May 2013 11:51:10 -0400 Subject: tracing: Fix crash when ftrace=nop on the kernel command line If ftrace= is on the kernel command line, when that tracer is registered, it will be initiated by tracing_set_tracer() to execute that tracer. The nop tracer is just a stub tracer that is used to have no tracer enabled. It is assigned at early bootup as it is the default tracer. But if ftrace=nop is on the kernel command line, the registering of the nop tracer will call tracing_set_tracer() which will try to execute the nop tracer. But it expects tr->current_trace to be assigned something as it usually is assigned to the nop tracer. As it hasn't been assigned to anything yet, it causes the system to crash. The simple fix is to move the tr->current_trace = nop before registering the nop tracer. The functionality is still the same as the nop tracer doesn't do anything anyway. Reported-by: Peter Zijlstra Signed-off-by: Steven Rostedt diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index ae6fa2d..4d79485 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -6216,10 +6216,15 @@ __init static int tracer_alloc_buffers(void) trace_init_cmdlines(); - register_tracer(&nop_trace); - + /* + * register_tracer() might reference current_trace, so it + * needs to be set before we register anything. This is + * just a bootstrap of current_trace anyway. + */ global_trace.current_trace = &nop_trace; + register_tracer(&nop_trace); + /* All seems OK, enable tracing */ tracing_disabled = 0; -- cgit v0.10.2 From c73a1afbe6dce11b6e249d0eee69b90dc24daa88 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Tue, 14 May 2013 23:34:53 -0700 Subject: Input: wacom - add an eraser to DTH2242/DTK2241 plus send begin and end of express keys events for Cintiq 13HD and DTH2242/DTK2241 Signed-off-by: Ping Cheng Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 3b6998a..5c68e44 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -362,7 +362,7 @@ static int wacom_intuos_inout(struct wacom_wac *wacom) case 0x100804: /* Intuos4/5 13HD/24HD Art Pen */ case 0x140802: /* Intuos4/5 13HD/24HD Classic Pen */ case 0x160802: /* Cintiq 13HD Pro Pen */ - case 0x180802: /* DTH2242 Grip Pen */ + case 0x180802: /* DTH2242 Pen */ wacom->tool[idx] = BTN_TOOL_PEN; break; @@ -400,6 +400,7 @@ static int wacom_intuos_inout(struct wacom_wac *wacom) case 0x10090a: /* Intuos4/5 13HD/24HD Airbrush Eraser */ case 0x10080c: /* Intuos4/5 13HD/24HD Art Pen Eraser */ case 0x16080a: /* Cintiq 13HD Pro Pen Eraser */ + case 0x18080a: /* DTH2242 Eraser */ wacom->tool[idx] = BTN_TOOL_RUBBER; break; @@ -550,6 +551,11 @@ static int wacom_intuos_irq(struct wacom_wac *wacom) input_report_key(input, BTN_3, (data[6] & 0x08)); input_report_key(input, BTN_4, (data[6] & 0x10)); input_report_key(input, BTN_5, (data[6] & 0x20)); + if (data[6] & 0x3f) { + input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); + } else { + input_report_abs(input, ABS_MISC, 0); + } } else if (features->type == WACOM_13HD) { input_report_key(input, BTN_0, (data[3] & 0x01)); input_report_key(input, BTN_1, (data[4] & 0x01)); @@ -560,6 +566,11 @@ static int wacom_intuos_irq(struct wacom_wac *wacom) input_report_key(input, BTN_6, (data[4] & 0x20)); input_report_key(input, BTN_7, (data[4] & 0x40)); input_report_key(input, BTN_8, (data[4] & 0x80)); + if ((data[3] & 0x01) | data[4]) { + input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); + } else { + input_report_abs(input, ABS_MISC, 0); + } } else if (features->type == WACOM_24HD) { input_report_key(input, BTN_0, (data[6] & 0x01)); input_report_key(input, BTN_1, (data[6] & 0x02)); @@ -1539,15 +1550,15 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, __set_bit(KEY_PROG1, input_dev->keybit); __set_bit(KEY_PROG2, input_dev->keybit); __set_bit(KEY_PROG3, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); + input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0); /* fall through */ case DTK: for (i = 0; i < 6; i++) __set_bit(BTN_0 + i, input_dev->keybit); - input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); - input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0); - __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); wacom_setup_cintiq(wacom_wac); -- cgit v0.10.2 From f20c783c3ae33c30fd7cf0616db18d30cb6e802b Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Thu, 23 May 2013 17:23:49 +0200 Subject: regmap: regcache: Fixup locking for custom lock callbacks The parameter passed to the regmap lock/unlock callbacks needs to be map->lock_arg, regcache passes just map. This works fine in the case that no custom locking callbacks are used since in this case map->lock_arg equals map, but will break when custom locking callbacks are used. The issue was introduced in commit 0d4529c5("regmap: make lock/unlock functions customizable") and is fixed by this patch. Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown diff --git a/drivers/base/regmap/regcache-rbtree.c b/drivers/base/regmap/regcache-rbtree.c index aa0875f..b4e343b 100644 --- a/drivers/base/regmap/regcache-rbtree.c +++ b/drivers/base/regmap/regcache-rbtree.c @@ -143,7 +143,7 @@ static int rbtree_show(struct seq_file *s, void *ignored) int registers = 0; int this_registers, average; - map->lock(map); + map->lock(map->lock_arg); mem_size = sizeof(*rbtree_ctx); mem_size += BITS_TO_LONGS(map->cache_present_nbits) * sizeof(long); @@ -170,7 +170,7 @@ static int rbtree_show(struct seq_file *s, void *ignored) seq_printf(s, "%d nodes, %d registers, average %d registers, used %zu bytes\n", nodes, registers, average, mem_size); - map->unlock(map); + map->unlock(map->lock_arg); return 0; } diff --git a/drivers/base/regmap/regcache.c b/drivers/base/regmap/regcache.c index 75923f2..507ee2d 100644 --- a/drivers/base/regmap/regcache.c +++ b/drivers/base/regmap/regcache.c @@ -270,7 +270,7 @@ int regcache_sync(struct regmap *map) BUG_ON(!map->cache_ops || !map->cache_ops->sync); - map->lock(map); + map->lock(map->lock_arg); /* Remember the initial bypass state */ bypass = map->cache_bypass; dev_dbg(map->dev, "Syncing %s cache\n", @@ -306,7 +306,7 @@ out: trace_regcache_sync(map->dev, name, "stop"); /* Restore the bypass state */ map->cache_bypass = bypass; - map->unlock(map); + map->unlock(map->lock_arg); return ret; } @@ -333,7 +333,7 @@ int regcache_sync_region(struct regmap *map, unsigned int min, BUG_ON(!map->cache_ops || !map->cache_ops->sync); - map->lock(map); + map->lock(map->lock_arg); /* Remember the initial bypass state */ bypass = map->cache_bypass; @@ -352,7 +352,7 @@ out: trace_regcache_sync(map->dev, name, "stop region"); /* Restore the bypass state */ map->cache_bypass = bypass; - map->unlock(map); + map->unlock(map->lock_arg); return ret; } @@ -372,11 +372,11 @@ EXPORT_SYMBOL_GPL(regcache_sync_region); */ void regcache_cache_only(struct regmap *map, bool enable) { - map->lock(map); + map->lock(map->lock_arg); WARN_ON(map->cache_bypass && enable); map->cache_only = enable; trace_regmap_cache_only(map->dev, enable); - map->unlock(map); + map->unlock(map->lock_arg); } EXPORT_SYMBOL_GPL(regcache_cache_only); @@ -391,9 +391,9 @@ EXPORT_SYMBOL_GPL(regcache_cache_only); */ void regcache_mark_dirty(struct regmap *map) { - map->lock(map); + map->lock(map->lock_arg); map->cache_dirty = true; - map->unlock(map); + map->unlock(map->lock_arg); } EXPORT_SYMBOL_GPL(regcache_mark_dirty); @@ -410,11 +410,11 @@ EXPORT_SYMBOL_GPL(regcache_mark_dirty); */ void regcache_cache_bypass(struct regmap *map, bool enable) { - map->lock(map); + map->lock(map->lock_arg); WARN_ON(map->cache_only && enable); map->cache_bypass = enable; trace_regmap_cache_bypass(map->dev, enable); - map->unlock(map); + map->unlock(map->lock_arg); } EXPORT_SYMBOL_GPL(regcache_cache_bypass); -- cgit v0.10.2 From c815797663b72e3ac1736f1886538152bc48e4af Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 23 May 2013 18:10:21 +0200 Subject: cfg80211: check wdev->netdev in connection work If a P2P-Device is present and another virtual interface triggers the connection work, the system crash because it tries to check if the P2P-Device's netdev (which doesn't exist) is up. Skip any wdevs that have no netdev to fix this. Cc: stable@vger.kernel.org Reported-by: YanBo Signed-off-by: Johannes Berg diff --git a/net/wireless/sme.c b/net/wireless/sme.c index 8b5eddf..3ed35c3 100644 --- a/net/wireless/sme.c +++ b/net/wireless/sme.c @@ -231,6 +231,9 @@ void cfg80211_conn_work(struct work_struct *work) mutex_lock(&rdev->sched_scan_mtx); list_for_each_entry(wdev, &rdev->wdev_list, list) { + if (!wdev->netdev) + continue; + wdev_lock(wdev); if (!netif_running(wdev->netdev)) { wdev_unlock(wdev); -- cgit v0.10.2 From b4d3ba3346f092b9185da991414775281ceacaac Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 22 May 2013 22:46:09 -0700 Subject: lib: make iovec obj instead of lib Fix build error io vmw_vmci.ko when CONFIG_VMWARE_VMCI=m by chaning iovec.o from lib-y to obj-y. ERROR: "memcpy_toiovec" [drivers/misc/vmw_vmci/vmw_vmci.ko] undefined! ERROR: "memcpy_fromiovec" [drivers/misc/vmw_vmci/vmw_vmci.ko] undefined! Signed-off-by: Randy Dunlap Acked-by: Rusty Russell Signed-off-by: Linus Torvalds diff --git a/lib/Makefile b/lib/Makefile index 2377211..c55a037 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -9,7 +9,7 @@ endif lib-y := ctype.o string.o vsprintf.o cmdline.o \ rbtree.o radix-tree.o dump_stack.o timerqueue.o\ - idr.o int_sqrt.o extable.o iovec.o \ + idr.o int_sqrt.o extable.o \ sha1.o md5.o irq_regs.o reciprocal_div.o argv_split.o \ proportions.o flex_proportions.o prio_heap.o ratelimit.o show_mem.o \ is_single_threaded.o plist.o decompress.o kobject_uevent.o \ @@ -23,7 +23,7 @@ lib-y += kobject.o klist.o obj-y += bcd.o div64.o sort.o parser.o halfmd4.o debug_locks.o random32.o \ bust_spinlocks.o hexdump.o kasprintf.o bitmap.o scatterlist.o \ - gcd.o lcm.o list_sort.o uuid.o flex_array.o \ + gcd.o lcm.o list_sort.o uuid.o flex_array.o iovec.o \ bsearch.o find_last_bit.o find_next_bit.o llist.o memweight.o kfifo.o obj-y += string_helpers.o obj-$(CONFIG_TEST_STRING_HELPERS) += test-string_helpers.o -- cgit v0.10.2 From cf90bc4830b858487fe4b9b9ecd0031e23ca3e83 Mon Sep 17 00:00:00 2001 From: Chayan Biswas Date: Wed, 22 May 2013 22:34:49 +0000 Subject: Return the result from user admin command IOCTL even in case of failure We copy the result to user if the command is completed from the controller even if it completes with failure (non-zero) status. A return status of < 0 indicates the command was not completed by the controller. The user application may expect the error code in the result field in case of failure. Signed-off-by: Chayan Biswas Signed-off-by: Matthew Wilcox diff --git a/drivers/block/nvme-core.c b/drivers/block/nvme-core.c index 42abf72..8493708 100644 --- a/drivers/block/nvme-core.c +++ b/drivers/block/nvme-core.c @@ -1439,7 +1439,7 @@ static int nvme_user_admin_cmd(struct nvme_dev *dev, nvme_free_iod(dev, iod); } - if (!status && copy_to_user(&ucmd->result, &cmd.result, + if ((status >= 0) && copy_to_user(&ucmd->result, &cmd.result, sizeof(cmd.result))) status = -EFAULT; -- cgit v0.10.2 From 2b436312f0919c05804fed5aa4b7f255db196e7a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 23 May 2013 21:04:38 +0200 Subject: mac80211: fix queue handling crash The code I added in "mac80211: don't start new netdev queues if driver stopped" crashes for monitor and AP VLAN interfaces because while they have a netdev, they don't have queues set up by the driver. To fix the crash, exclude these from queue accounting here and just start their netdev queues unconditionally. For monitor, this is the best we can do, as we can redirect frames there to any other interface and don't know which one that will since it can be different for each frame. For AP VLAN interfaces, we can do better later and actually properly track the queue status. Not doing this is really a separate bug though. Reported-by: Ilan Peer Reported-by: Jouni Malinen Signed-off-by: Johannes Berg diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 60f1ce5..68f51c3 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -653,7 +653,11 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up) ieee80211_recalc_ps(local, -1); - if (dev) { + if (sdata->vif.type == NL80211_IFTYPE_MONITOR || + sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { + /* XXX: for AP_VLAN, actually track AP queues */ + netif_tx_start_all_queues(dev); + } else if (dev) { unsigned long flags; int n_acs = IEEE80211_NUM_ACS; int ac; -- cgit v0.10.2 From 7a1a0cbfeb31f20acc10722642198e76bbc30cb9 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 23 May 2013 12:15:32 -0700 Subject: net: Revert unused variable changes. This reverts commits: c573972c111eb4c6b3f3250ad71e7c75cc799833 1a5904342c7380ceddd61c0b37544d752d0b1433 da2e2c214953f37c2a6be20226537ca5a329724c They were meant for net-next not net. Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/apple/bmac.c b/drivers/net/ethernet/apple/bmac.c index 8848190..f36bbd6 100644 --- a/drivers/net/ethernet/apple/bmac.c +++ b/drivers/net/ethernet/apple/bmac.c @@ -1016,6 +1016,7 @@ static void bmac_set_multicast(struct net_device *dev) static void bmac_set_multicast(struct net_device *dev) { struct netdev_hw_addr *ha; + int i; unsigned short rx_cfg; u32 crc; diff --git a/drivers/net/ethernet/korina.c b/drivers/net/ethernet/korina.c index 907e94a..5409fe8 100644 --- a/drivers/net/ethernet/korina.c +++ b/drivers/net/ethernet/korina.c @@ -483,6 +483,7 @@ static void korina_multicast_list(struct net_device *dev) unsigned long flags; struct netdev_hw_addr *ha; u32 recognise = ETH_ARC_AB; /* always accept broadcasts */ + int i; /* Set promiscuous mode */ if (dev->flags & IFF_PROMISC) diff --git a/drivers/net/ethernet/sun/sunbmac.c b/drivers/net/ethernet/sun/sunbmac.c index 85d3b6b..0549759 100644 --- a/drivers/net/ethernet/sun/sunbmac.c +++ b/drivers/net/ethernet/sun/sunbmac.c @@ -995,6 +995,7 @@ static void bigmac_set_multicast(struct net_device *dev) struct bigmac *bp = netdev_priv(dev); void __iomem *bregs = bp->bregs; struct netdev_hw_addr *ha; + int i; u32 tmp, crc; /* Disable the receiver. The bit self-clears when -- cgit v0.10.2 From 4325d724cd91643c727ca4cb063e8bb19989950b Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 23 May 2013 15:05:59 +0200 Subject: cfg80211: fix reporting 64-bit station info tx bytes Copy & paste mistake - STATION_INFO_TX_BYTES64 is the name of the flag, not NL80211_STA_INFO_TX_BYTES64. Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index dfdb5e6..d5aed3b 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3411,7 +3411,7 @@ static int nl80211_send_station(struct sk_buff *msg, u32 portid, u32 seq, (u32)sinfo->rx_bytes)) goto nla_put_failure; if ((sinfo->filled & (STATION_INFO_TX_BYTES | - NL80211_STA_INFO_TX_BYTES64)) && + STATION_INFO_TX_BYTES64)) && nla_put_u32(msg, NL80211_STA_INFO_TX_BYTES, (u32)sinfo->tx_bytes)) goto nla_put_failure; -- cgit v0.10.2 From 83c168bf8017212a9d502536f9dcd0b54d24e330 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Wed, 15 May 2013 22:00:10 -0400 Subject: NFS: Fix SETCLIENTID fallback if GSS is not available Commit 79d852bf "NFS: Retry SETCLIENTID with AUTH_SYS instead of AUTH_NONE" did not take into account commit 23631227 "NFSv4: Fix the fallback to AUTH_NULL if krb5i is not available". Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4client.c b/fs/nfs/nfs4client.c index 947b0c9..4cbad5d 100644 --- a/fs/nfs/nfs4client.c +++ b/fs/nfs/nfs4client.c @@ -203,7 +203,7 @@ struct nfs_client *nfs4_init_client(struct nfs_client *clp, __set_bit(NFS_CS_DISCRTRY, &clp->cl_flags); error = nfs_create_rpc_client(clp, timeparms, RPC_AUTH_GSS_KRB5I); if (error == -EINVAL) - error = nfs_create_rpc_client(clp, timeparms, RPC_AUTH_NULL); + error = nfs_create_rpc_client(clp, timeparms, RPC_AUTH_UNIX); if (error < 0) goto error; -- cgit v0.10.2 From 547669d483e5783d722772af1483fa474da7caf9 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 23 May 2013 07:44:20 +0000 Subject: tcp: xps: fix reordering issues commit 3853b5841c01a ("xps: Improvements in TX queue selection") introduced ooo_okay flag, but the condition to set it is slightly wrong. In our traces, we have seen ACK packets being received out of order, and RST packets sent in response. We should test if we have any packets still in host queue. Signed-off-by: Eric Dumazet Cc: Tom Herbert Cc: Yuchung Cheng Cc: Neal Cardwell Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 536d409..ec335fa 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -874,11 +874,13 @@ static int tcp_transmit_skb(struct sock *sk, struct sk_buff *skb, int clone_it, &md5); tcp_header_size = tcp_options_size + sizeof(struct tcphdr); - if (tcp_packets_in_flight(tp) == 0) { + if (tcp_packets_in_flight(tp) == 0) tcp_ca_event(sk, CA_EVENT_TX_START); - skb->ooo_okay = 1; - } else - skb->ooo_okay = 0; + + /* if no packet is in qdisc/device queue, then allow XPS to select + * another queue. + */ + skb->ooo_okay = sk_wmem_alloc_get(sk) == 0; skb_push(skb, tcp_header_size); skb_reset_transport_header(skb); -- cgit v0.10.2 From 7805d000db30a3787a4c969bab6ae4d8a5fd8ce6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 24 May 2013 10:50:24 +0900 Subject: cgroup: fix a subtle bug in descendant pre-order walk When cgroup_next_descendant_pre() initiates a walk, it checks whether the subtree root doesn't have any children and if not returns NULL. Later code assumes that the subtree isn't empty. This is broken because the subtree may become empty inbetween, which can lead to the traversal escaping the subtree by walking to the sibling of the subtree root. There's no reason to have the early exit path. Remove it along with the later assumption that the subtree isn't empty. This simplifies the code a bit and fixes the subtle bug. While at it, fix the comment of cgroup_for_each_descendant_pre() which was incorrectly referring to ->css_offline() instead of ->css_online(). Signed-off-by: Tejun Heo Reviewed-by: Michal Hocko Cc: stable@vger.kernel.org diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index 5047355..8bda129 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -707,7 +707,7 @@ struct cgroup *cgroup_rightmost_descendant(struct cgroup *pos); * * If a subsystem synchronizes against the parent in its ->css_online() and * before starting iterating, and synchronizes against @pos on each - * iteration, any descendant cgroup which finished ->css_offline() is + * iteration, any descendant cgroup which finished ->css_online() is * guaranteed to be visible in the future iterations. * * In other words, the following guarantees that a descendant can't escape diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 38b1365..31e9ef3 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -2954,11 +2954,8 @@ struct cgroup *cgroup_next_descendant_pre(struct cgroup *pos, WARN_ON_ONCE(!rcu_read_lock_held()); /* if first iteration, pretend we just visited @cgroup */ - if (!pos) { - if (list_empty(&cgroup->children)) - return NULL; + if (!pos) pos = cgroup; - } /* visit the first child if exists */ next = list_first_or_null_rcu(&pos->children, struct cgroup, sibling); @@ -2966,14 +2963,14 @@ struct cgroup *cgroup_next_descendant_pre(struct cgroup *pos, return next; /* no child, visit my or the closest ancestor's next sibling */ - do { + while (pos != cgroup) { next = list_entry_rcu(pos->sibling.next, struct cgroup, sibling); if (&next->sibling != &pos->parent->children) return next; pos = pos->parent; - } while (pos != cgroup); + } return NULL; } -- cgit v0.10.2 From 950e2958a5e96406e6e5ff4190a638a54769f89b Mon Sep 17 00:00:00 2001 From: Wei Yang Date: Wed, 22 May 2013 15:58:22 +0000 Subject: be2net: bug fix on returning an invalid nic descriptor In function be_get_nic_desc(), it will go through the descriptor array returned from f/w. By comparing the desc_type field, it determines whether there is a nic descriptor in the array or not. In the case of no nic descriptor, this function should return NULL. The code may return an invalide descriptor, when there is no nic descriptor in the array and the desc_count is less than MAX_RESOURCE_DESC. In this case, even there is no nic descriptor, it will still return the lase descriptor since the i doesn't equal to MAX_RESOURCE_DESC. This patch fix this issue by returning the descriptor when find it and return NULL for other cases. Signed-off-by: Wei Yang Reviewed-by: Gavin Shan Reviewed-by: Xiao Guangrong Acked-by: Sathya Perla Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index fd7b547..a236ecd 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -2976,22 +2976,17 @@ static struct be_nic_resource_desc *be_get_nic_desc(u8 *buf, u32 desc_count, for (i = 0; i < desc_count; i++) { desc->desc_len = desc->desc_len ? : RESOURCE_DESC_SIZE; if (((void *)desc + desc->desc_len) > - (void *)(buf + max_buf_size)) { - desc = NULL; - break; - } + (void *)(buf + max_buf_size)) + return NULL; if (desc->desc_type == NIC_RESOURCE_DESC_TYPE_V0 || desc->desc_type == NIC_RESOURCE_DESC_TYPE_V1) - break; + return desc; desc = (void *)desc + desc->desc_len; } - if (!desc || i == MAX_RESOURCE_DESC) - return NULL; - - return desc; + return NULL; } /* Uses Mbox */ -- cgit v0.10.2 From 37523dc5ec2fead0eb5235fd9334f0419013a1f2 Mon Sep 17 00:00:00 2001 From: Jonas Andersson Date: Thu, 23 May 2013 13:38:05 +0200 Subject: ARM: dts: imx: fix clocks for cspi The CSPI controller has only one clock, but the driver spi-imx.c needs clock "per" to calculate bitrate divisor. Signed-off-by: Jonas Andersson Acked-by: Sascha Hauer Signed-off-by: Shawn Guo diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index d2550e0..7011539 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -141,8 +141,8 @@ #size-cells = <0>; compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; reg = <0x43fa4000 0x4000>; - clocks = <&clks 62>; - clock-names = "ipg"; + clocks = <&clks 62>, <&clks 62>; + clock-names = "ipg", "per"; interrupts = <14>; status = "disabled"; }; @@ -182,8 +182,8 @@ compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; reg = <0x50004000 0x4000>; interrupts = <0>; - clocks = <&clks 80>; - clock-names = "ipg"; + clocks = <&clks 80>, <&clks 80>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -210,8 +210,8 @@ #size-cells = <0>; compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; reg = <0x50010000 0x4000>; - clocks = <&clks 79>; - clock-names = "ipg"; + clocks = <&clks 79>, <&clks 79>; + clock-names = "ipg", "per"; interrupts = <13>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index ff4bd48..75bd113 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -131,7 +131,7 @@ compatible = "fsl,imx27-cspi"; reg = <0x1000e000 0x1000>; interrupts = <16>; - clocks = <&clks 53>, <&clks 0>; + clocks = <&clks 53>, <&clks 53>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -142,7 +142,7 @@ compatible = "fsl,imx27-cspi"; reg = <0x1000f000 0x1000>; interrupts = <15>; - clocks = <&clks 52>, <&clks 0>; + clocks = <&clks 52>, <&clks 52>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -223,7 +223,7 @@ compatible = "fsl,imx27-cspi"; reg = <0x10017000 0x1000>; interrupts = <6>; - clocks = <&clks 51>, <&clks 0>; + clocks = <&clks 51>, <&clks 51>; clock-names = "ipg", "per"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 21bb786..53fdde6 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -631,7 +631,7 @@ compatible = "fsl,imx51-cspi", "fsl,imx35-cspi"; reg = <0x83fc0000 0x4000>; interrupts = <38>; - clocks = <&clks 55>, <&clks 0>; + clocks = <&clks 55>, <&clks 55>; clock-names = "ipg", "per"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 845982e..eb83aa0 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -714,7 +714,7 @@ compatible = "fsl,imx53-cspi", "fsl,imx35-cspi"; reg = <0x63fc0000 0x4000>; interrupts = <38>; - clocks = <&clks 55>, <&clks 0>; + clocks = <&clks 55>, <&clks 55>; clock-names = "ipg", "per"; status = "disabled"; }; -- cgit v0.10.2 From 1ad936e850a896bc16e0d72a56be432f9954ad7e Mon Sep 17 00:00:00 2001 From: Kent Yoder Date: Fri, 12 Apr 2013 17:13:59 +0000 Subject: drivers/crypto/nx: Fixes for multiple races and issues Fixes a race on driver init with registering algorithms where the driver status flag wasn't being set before self testing started. Added the cra_alignmask field for CBC and ECB modes. Fixed a bug in GCM where AES block size was being used instead of authsize. Removed use of blkcipher_walk routines for scatterlist processing. Corner cases in the code prevent us from processing an entire scatterlist at a time and walking the buffers in block sized chunks turns out to be unecessary anyway. Fixed off-by-one error in saving off extra data in the sha code. Fixed accounting error for number of bytes processed in the sha code. Signed-off-by: Kent Yoder Signed-off-by: Benjamin Herrenschmidt diff --git a/drivers/crypto/nx/nx-aes-cbc.c b/drivers/crypto/nx/nx-aes-cbc.c index a76d4c4..35d483f 100644 --- a/drivers/crypto/nx/nx-aes-cbc.c +++ b/drivers/crypto/nx/nx-aes-cbc.c @@ -126,6 +126,7 @@ struct crypto_alg nx_cbc_aes_alg = { .cra_blocksize = AES_BLOCK_SIZE, .cra_ctxsize = sizeof(struct nx_crypto_ctx), .cra_type = &crypto_blkcipher_type, + .cra_alignmask = 0xf, .cra_module = THIS_MODULE, .cra_init = nx_crypto_ctx_aes_cbc_init, .cra_exit = nx_crypto_ctx_exit, diff --git a/drivers/crypto/nx/nx-aes-ecb.c b/drivers/crypto/nx/nx-aes-ecb.c index ba5f161..7bbc9a8 100644 --- a/drivers/crypto/nx/nx-aes-ecb.c +++ b/drivers/crypto/nx/nx-aes-ecb.c @@ -123,6 +123,7 @@ struct crypto_alg nx_ecb_aes_alg = { .cra_priority = 300, .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, .cra_blocksize = AES_BLOCK_SIZE, + .cra_alignmask = 0xf, .cra_ctxsize = sizeof(struct nx_crypto_ctx), .cra_type = &crypto_blkcipher_type, .cra_module = THIS_MODULE, diff --git a/drivers/crypto/nx/nx-aes-gcm.c b/drivers/crypto/nx/nx-aes-gcm.c index c8109ed..6cca6c3 100644 --- a/drivers/crypto/nx/nx-aes-gcm.c +++ b/drivers/crypto/nx/nx-aes-gcm.c @@ -219,7 +219,7 @@ static int gcm_aes_nx_crypt(struct aead_request *req, int enc) if (enc) NX_CPB_FDM(csbcpb) |= NX_FDM_ENDE_ENCRYPT; else - nbytes -= AES_BLOCK_SIZE; + nbytes -= crypto_aead_authsize(crypto_aead_reqtfm(req)); csbcpb->cpb.aes_gcm.bit_length_data = nbytes * 8; diff --git a/drivers/crypto/nx/nx-sha256.c b/drivers/crypto/nx/nx-sha256.c index 9767315..67024f2 100644 --- a/drivers/crypto/nx/nx-sha256.c +++ b/drivers/crypto/nx/nx-sha256.c @@ -69,7 +69,7 @@ static int nx_sha256_update(struct shash_desc *desc, const u8 *data, * 1: <= SHA256_BLOCK_SIZE: copy into state, return 0 * 2: > SHA256_BLOCK_SIZE: process X blocks, copy in leftover */ - if (len + sctx->count <= SHA256_BLOCK_SIZE) { + if (len + sctx->count < SHA256_BLOCK_SIZE) { memcpy(sctx->buf + sctx->count, data, len); sctx->count += len; goto out; @@ -110,7 +110,8 @@ static int nx_sha256_update(struct shash_desc *desc, const u8 *data, atomic_inc(&(nx_ctx->stats->sha256_ops)); /* copy the leftover back into the state struct */ - memcpy(sctx->buf, data + len - leftover, leftover); + if (leftover) + memcpy(sctx->buf, data + len - leftover, leftover); sctx->count = leftover; csbcpb->cpb.sha256.message_bit_length += (u64) @@ -130,6 +131,7 @@ static int nx_sha256_final(struct shash_desc *desc, u8 *out) struct nx_sg *in_sg, *out_sg; int rc; + if (NX_CPB_FDM(csbcpb) & NX_FDM_CONTINUATION) { /* we've hit the nx chip previously, now we're finalizing, * so copy over the partial digest */ @@ -162,7 +164,7 @@ static int nx_sha256_final(struct shash_desc *desc, u8 *out) atomic_inc(&(nx_ctx->stats->sha256_ops)); - atomic64_add(csbcpb->cpb.sha256.message_bit_length, + atomic64_add(csbcpb->cpb.sha256.message_bit_length / 8, &(nx_ctx->stats->sha256_bytes)); memcpy(out, csbcpb->cpb.sha256.message_digest, SHA256_DIGEST_SIZE); out: diff --git a/drivers/crypto/nx/nx-sha512.c b/drivers/crypto/nx/nx-sha512.c index 3177b8c..08eee11 100644 --- a/drivers/crypto/nx/nx-sha512.c +++ b/drivers/crypto/nx/nx-sha512.c @@ -69,7 +69,7 @@ static int nx_sha512_update(struct shash_desc *desc, const u8 *data, * 1: <= SHA512_BLOCK_SIZE: copy into state, return 0 * 2: > SHA512_BLOCK_SIZE: process X blocks, copy in leftover */ - if ((u64)len + sctx->count[0] <= SHA512_BLOCK_SIZE) { + if ((u64)len + sctx->count[0] < SHA512_BLOCK_SIZE) { memcpy(sctx->buf + sctx->count[0], data, len); sctx->count[0] += len; goto out; @@ -110,7 +110,8 @@ static int nx_sha512_update(struct shash_desc *desc, const u8 *data, atomic_inc(&(nx_ctx->stats->sha512_ops)); /* copy the leftover back into the state struct */ - memcpy(sctx->buf, data + len - leftover, leftover); + if (leftover) + memcpy(sctx->buf, data + len - leftover, leftover); sctx->count[0] = leftover; spbc_bits = csbcpb->cpb.sha512.spbc * 8; @@ -168,7 +169,7 @@ static int nx_sha512_final(struct shash_desc *desc, u8 *out) goto out; atomic_inc(&(nx_ctx->stats->sha512_ops)); - atomic64_add(csbcpb->cpb.sha512.message_bit_length_lo, + atomic64_add(csbcpb->cpb.sha512.message_bit_length_lo / 8, &(nx_ctx->stats->sha512_bytes)); memcpy(out, csbcpb->cpb.sha512.message_digest, SHA512_DIGEST_SIZE); diff --git a/drivers/crypto/nx/nx.c b/drivers/crypto/nx/nx.c index c767f23..bbdab6e 100644 --- a/drivers/crypto/nx/nx.c +++ b/drivers/crypto/nx/nx.c @@ -211,44 +211,20 @@ int nx_build_sg_lists(struct nx_crypto_ctx *nx_ctx, { struct nx_sg *nx_insg = nx_ctx->in_sg; struct nx_sg *nx_outsg = nx_ctx->out_sg; - struct blkcipher_walk walk; - int rc; - - blkcipher_walk_init(&walk, dst, src, nbytes); - rc = blkcipher_walk_virt_block(desc, &walk, AES_BLOCK_SIZE); - if (rc) - goto out; if (iv) - memcpy(iv, walk.iv, AES_BLOCK_SIZE); + memcpy(iv, desc->info, AES_BLOCK_SIZE); - while (walk.nbytes) { - nx_insg = nx_build_sg_list(nx_insg, walk.src.virt.addr, - walk.nbytes, nx_ctx->ap->sglen); - nx_outsg = nx_build_sg_list(nx_outsg, walk.dst.virt.addr, - walk.nbytes, nx_ctx->ap->sglen); - - rc = blkcipher_walk_done(desc, &walk, 0); - if (rc) - break; - } - - if (walk.nbytes) { - nx_insg = nx_build_sg_list(nx_insg, walk.src.virt.addr, - walk.nbytes, nx_ctx->ap->sglen); - nx_outsg = nx_build_sg_list(nx_outsg, walk.dst.virt.addr, - walk.nbytes, nx_ctx->ap->sglen); - - rc = 0; - } + nx_insg = nx_walk_and_build(nx_insg, nx_ctx->ap->sglen, src, 0, nbytes); + nx_outsg = nx_walk_and_build(nx_outsg, nx_ctx->ap->sglen, dst, 0, nbytes); /* these lengths should be negative, which will indicate to phyp that * the input and output parameters are scatterlists, not linear * buffers */ nx_ctx->op.inlen = (nx_ctx->in_sg - nx_insg) * sizeof(struct nx_sg); nx_ctx->op.outlen = (nx_ctx->out_sg - nx_outsg) * sizeof(struct nx_sg); -out: - return rc; + + return 0; } /** @@ -454,6 +430,8 @@ static int nx_register_algs(void) if (rc) goto out; + nx_driver.of.status = NX_OKAY; + rc = crypto_register_alg(&nx_ecb_aes_alg); if (rc) goto out; @@ -498,8 +476,6 @@ static int nx_register_algs(void) if (rc) goto out_unreg_s512; - nx_driver.of.status = NX_OKAY; - goto out; out_unreg_s512: -- cgit v0.10.2 From 8fc1f5d7eff9a4ed0cdb7215e7ca4b82b931d6d7 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 20 May 2013 17:23:22 +0000 Subject: powerpc: Fix TLB cleanup at boot on POWER8 The TLB has 512 congruence classes (2048 entries 4 way set associative) while P7 had 128 Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/cpu_setup_power.S b/arch/powerpc/kernel/cpu_setup_power.S index a283b64..18b5b9c 100644 --- a/arch/powerpc/kernel/cpu_setup_power.S +++ b/arch/powerpc/kernel/cpu_setup_power.S @@ -135,8 +135,12 @@ __init_HFSCR: blr __init_TLB: - /* Clear the TLB */ - li r6,128 + /* + * Clear the TLB using the "IS 3" form of tlbiel instruction + * (invalidate by congruence class). P7 has 128 CCs, P8 has 512 + * so we just always do 512 + */ + li r6,512 mtctr r6 li r7,0xc00 /* IS field = 0b11 */ ptesync -- cgit v0.10.2 From bee7dd9c5fd5ab944e2e0ef3b92905fcbc993768 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 20 May 2013 17:24:39 +0000 Subject: powerpc/pci: Fix bogus message at boot about empty memory resources The message is only meant to be displayed if resource 0 is empty, but was displayed if any is. Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 6053f03..e9acf50 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1520,9 +1520,10 @@ static void pcibios_setup_phb_resources(struct pci_controller *hose, for (i = 0; i < 3; ++i) { res = &hose->mem_resources[i]; if (!res->flags) { - printk(KERN_ERR "PCI: Memory resource 0 not set for " - "host bridge %s (domain %d)\n", - hose->dn->full_name, hose->global_number); + if (i == 0) + printk(KERN_ERR "PCI: Memory resource 0 not set for " + "host bridge %s (domain %d)\n", + hose->dn->full_name, hose->global_number); continue; } offset = hose->mem_offset[i]; -- cgit v0.10.2 From 605e44d6e6f9b0c9ca8842dc0eb3ad032a463bdb Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 20 May 2013 17:25:15 +0000 Subject: powerpc/powernv: Fix condition for when to invalidate the TCE cache We use two flags, one to indicate an invalidation is needed after creating a new entry and one to indicate an invalidation is needed after removing an entry. However we were testing the wrong flag in the remove case. Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c index 163bd74..098d357 100644 --- a/arch/powerpc/platforms/powernv/pci.c +++ b/arch/powerpc/platforms/powernv/pci.c @@ -367,7 +367,7 @@ static void pnv_tce_free(struct iommu_table *tbl, long index, long npages) while (npages--) *(tcep++) = 0; - if (tbl->it_type & TCE_PCI_SWINV_CREATE) + if (tbl->it_type & TCE_PCI_SWINV_FREE) pnv_pci_ioda_tce_invalidate(tbl, tces, tcep - 1); } -- cgit v0.10.2 From 59affcd3e460b97492bc1aa2b843bafe7c54f596 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 21 May 2013 16:31:12 +0000 Subject: powerpc: Context switch more PMU related SPRs In commit 9353374 "Context switch the new EBB SPRs" we added support for context switching some new EBB SPRs. However despite four of us signing off on that patch we missed some. To be fair these are not actually new SPRs, but they are now potentially user accessible so need to be context switched. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index d7e67ca..594db6b 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -284,6 +284,12 @@ struct thread_struct { unsigned long ebbrr; unsigned long ebbhr; unsigned long bescr; + unsigned long siar; + unsigned long sdar; + unsigned long sier; + unsigned long mmcr0; + unsigned long mmcr2; + unsigned long mmcra; #endif }; diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index b51a97c..6f16ffa 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -127,6 +127,12 @@ int main(void) DEFINE(THREAD_BESCR, offsetof(struct thread_struct, bescr)); DEFINE(THREAD_EBBHR, offsetof(struct thread_struct, ebbhr)); DEFINE(THREAD_EBBRR, offsetof(struct thread_struct, ebbrr)); + DEFINE(THREAD_SIAR, offsetof(struct thread_struct, siar)); + DEFINE(THREAD_SDAR, offsetof(struct thread_struct, sdar)); + DEFINE(THREAD_SIER, offsetof(struct thread_struct, sier)); + DEFINE(THREAD_MMCR0, offsetof(struct thread_struct, mmcr0)); + DEFINE(THREAD_MMCR2, offsetof(struct thread_struct, mmcr2)); + DEFINE(THREAD_MMCRA, offsetof(struct thread_struct, mmcra)); #endif #ifdef CONFIG_PPC_TRANSACTIONAL_MEM DEFINE(PACATMSCRATCH, offsetof(struct paca_struct, tm_scratch)); diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 51cfb8f..0e9095e 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -465,6 +465,20 @@ BEGIN_FTR_SECTION std r0, THREAD_EBBHR(r3) mfspr r0, SPRN_EBBRR std r0, THREAD_EBBRR(r3) + + /* PMU registers made user read/(write) by EBB */ + mfspr r0, SPRN_SIAR + std r0, THREAD_SIAR(r3) + mfspr r0, SPRN_SDAR + std r0, THREAD_SDAR(r3) + mfspr r0, SPRN_SIER + std r0, THREAD_SIER(r3) + mfspr r0, SPRN_MMCR0 + std r0, THREAD_MMCR0(r3) + mfspr r0, SPRN_MMCR2 + std r0, THREAD_MMCR2(r3) + mfspr r0, SPRN_MMCRA + std r0, THREAD_MMCRA(r3) END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) #endif @@ -560,6 +574,20 @@ BEGIN_FTR_SECTION ld r0, THREAD_EBBRR(r4) mtspr SPRN_EBBRR, r0 + /* PMU registers made user read/(write) by EBB */ + ld r0, THREAD_SIAR(r4) + mtspr SPRN_SIAR, r0 + ld r0, THREAD_SDAR(r4) + mtspr SPRN_SDAR, r0 + ld r0, THREAD_SIER(r4) + mtspr SPRN_SIER, r0 + ld r0, THREAD_MMCR0(r4) + mtspr SPRN_MMCR0, r0 + ld r0, THREAD_MMCR2(r4) + mtspr SPRN_MMCR2, r0 + ld r0, THREAD_MMCRA(r4) + mtspr SPRN_MMCRA, r0 + ld r0,THREAD_TAR(r4) mtspr SPRN_TAR,r0 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) -- cgit v0.10.2 From b72c1f651491e4cd33ddec79c504a49071a512f0 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 21 May 2013 22:58:21 +0000 Subject: powerpc: Make radeon 32-bit MSI quirk work on powernv This moves the quirk itself to pci_64.c as to get built on all ppc64 platforms (the only ones with a pci_dn), factors the two implementations of get_pdn() into a single pci_get_dn() and use the quirk to do 32-bit MSIs on IODA based powernv platforms. Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h index 8b11b5b..2c1d8cb 100644 --- a/arch/powerpc/include/asm/pci-bridge.h +++ b/arch/powerpc/include/asm/pci-bridge.h @@ -174,6 +174,8 @@ struct pci_dn { /* Get the pointer to a device_node's pci_dn */ #define PCI_DN(dn) ((struct pci_dn *) (dn)->data) +extern struct pci_dn *pci_get_pdn(struct pci_dev *pdev); + extern void * update_dn_pci_info(struct device_node *dn, void *data); static inline int pci_device_from_OF_node(struct device_node *np, diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 873050d..2e86296 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -266,3 +266,13 @@ int pcibus_to_node(struct pci_bus *bus) } EXPORT_SYMBOL(pcibus_to_node); #endif + +static void quirk_radeon_32bit_msi(struct pci_dev *dev) +{ + struct pci_dn *pdn = pci_get_pdn(dev); + + if (pdn) + pdn->force_32bit_msi = 1; +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x68f2, quirk_radeon_32bit_msi); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0xaa68, quirk_radeon_32bit_msi); diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c index e7af165..df03844 100644 --- a/arch/powerpc/kernel/pci_dn.c +++ b/arch/powerpc/kernel/pci_dn.c @@ -32,6 +32,14 @@ #include #include +struct pci_dn *pci_get_pdn(struct pci_dev *pdev) +{ + struct device_node *dn = pci_device_to_OF_node(pdev); + if (!dn) + return NULL; + return PCI_DN(dn); +} + /* * Traverse_func that inits the PCI fields of the device node. * NOTE: this *must* be done before read/write config to the device. diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index 3937aaa..9c9d15e 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -68,16 +68,6 @@ define_pe_printk_level(pe_err, KERN_ERR); define_pe_printk_level(pe_warn, KERN_WARNING); define_pe_printk_level(pe_info, KERN_INFO); -static struct pci_dn *pnv_ioda_get_pdn(struct pci_dev *dev) -{ - struct device_node *np; - - np = pci_device_to_OF_node(dev); - if (!np) - return NULL; - return PCI_DN(np); -} - static int pnv_ioda_alloc_pe(struct pnv_phb *phb) { unsigned long pe; @@ -110,7 +100,7 @@ static struct pnv_ioda_pe *pnv_ioda_get_pe(struct pci_dev *dev) { struct pci_controller *hose = pci_bus_to_host(dev->bus); struct pnv_phb *phb = hose->private_data; - struct pci_dn *pdn = pnv_ioda_get_pdn(dev); + struct pci_dn *pdn = pci_get_pdn(dev); if (!pdn) return NULL; @@ -173,7 +163,7 @@ static int pnv_ioda_configure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe) /* Add to all parents PELT-V */ while (parent) { - struct pci_dn *pdn = pnv_ioda_get_pdn(parent); + struct pci_dn *pdn = pci_get_pdn(parent); if (pdn && pdn->pe_number != IODA_INVALID_PE) { rc = opal_pci_set_peltv(phb->opal_id, pdn->pe_number, pe->pe_number, OPAL_ADD_PE_TO_DOMAIN); @@ -252,7 +242,7 @@ static struct pnv_ioda_pe *pnv_ioda_setup_dev_PE(struct pci_dev *dev) { struct pci_controller *hose = pci_bus_to_host(dev->bus); struct pnv_phb *phb = hose->private_data; - struct pci_dn *pdn = pnv_ioda_get_pdn(dev); + struct pci_dn *pdn = pci_get_pdn(dev); struct pnv_ioda_pe *pe; int pe_num; @@ -323,7 +313,7 @@ static void pnv_ioda_setup_same_PE(struct pci_bus *bus, struct pnv_ioda_pe *pe) struct pci_dev *dev; list_for_each_entry(dev, &bus->devices, bus_list) { - struct pci_dn *pdn = pnv_ioda_get_pdn(dev); + struct pci_dn *pdn = pci_get_pdn(dev); if (pdn == NULL) { pr_warn("%s: No device node associated with device !\n", @@ -436,7 +426,7 @@ static void pnv_pci_ioda_setup_PEs(void) static void pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb, struct pci_dev *pdev) { - struct pci_dn *pdn = pnv_ioda_get_pdn(pdev); + struct pci_dn *pdn = pci_get_pdn(pdev); struct pnv_ioda_pe *pe; /* @@ -768,6 +758,7 @@ static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev, unsigned int is_64, struct msi_msg *msg) { struct pnv_ioda_pe *pe = pnv_ioda_get_pe(dev); + struct pci_dn *pdn = pci_get_pdn(dev); struct irq_data *idata; struct irq_chip *ichip; unsigned int xive_num = hwirq - phb->msi_base; @@ -783,6 +774,10 @@ static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev, if (pe->mve_number < 0) return -ENXIO; + /* Force 32-bit MSI on some broken devices */ + if (pdn && pdn->force_32bit_msi) + is_64 = 0; + /* Assign XIVE to PE */ rc = opal_pci_set_xive_pe(phb->opal_id, pe->pe_number, xive_num); if (rc) { @@ -1035,7 +1030,7 @@ static int pnv_pci_enable_device_hook(struct pci_dev *dev) if (!phb->initialized) return 0; - pdn = pnv_ioda_get_pdn(dev); + pdn = pci_get_pdn(dev); if (!pdn || pdn->pe_number == IODA_INVALID_PE) return -EINVAL; diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c index 098d357..277343c 100644 --- a/arch/powerpc/platforms/powernv/pci.c +++ b/arch/powerpc/platforms/powernv/pci.c @@ -47,6 +47,10 @@ static int pnv_msi_check_device(struct pci_dev* pdev, int nvec, int type) { struct pci_controller *hose = pci_bus_to_host(pdev->bus); struct pnv_phb *phb = hose->private_data; + struct pci_dn *pdn = pci_get_pdn(pdev); + + if (pdn && pdn->force_32bit_msi && !phb->msi32_support) + return -ENODEV; return (phb && phb->msi_bmp.bitmap) ? 0 : -ENODEV; } diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c index 420524e..d34f4ff 100644 --- a/arch/powerpc/platforms/pseries/msi.c +++ b/arch/powerpc/platforms/pseries/msi.c @@ -26,26 +26,6 @@ static int query_token, change_token; #define RTAS_CHANGE_MSIX_FN 4 #define RTAS_CHANGE_32MSI_FN 5 -static struct pci_dn *get_pdn(struct pci_dev *pdev) -{ - struct device_node *dn; - struct pci_dn *pdn; - - dn = pci_device_to_OF_node(pdev); - if (!dn) { - dev_dbg(&pdev->dev, "rtas_msi: No OF device node\n"); - return NULL; - } - - pdn = PCI_DN(dn); - if (!pdn) { - dev_dbg(&pdev->dev, "rtas_msi: No PCI DN\n"); - return NULL; - } - - return pdn; -} - /* RTAS Helpers */ static int rtas_change_msi(struct pci_dn *pdn, u32 func, u32 num_irqs) @@ -91,7 +71,7 @@ static void rtas_disable_msi(struct pci_dev *pdev) { struct pci_dn *pdn; - pdn = get_pdn(pdev); + pdn = pci_get_pdn(pdev); if (!pdn) return; @@ -152,7 +132,7 @@ static int check_req(struct pci_dev *pdev, int nvec, char *prop_name) struct pci_dn *pdn; const u32 *req_msi; - pdn = get_pdn(pdev); + pdn = pci_get_pdn(pdev); if (!pdn) return -ENODEV; @@ -402,7 +382,7 @@ static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec_in, int type) struct msi_msg msg; int nvec = nvec_in; - pdn = get_pdn(pdev); + pdn = pci_get_pdn(pdev); if (!pdn) return -ENODEV; @@ -518,12 +498,3 @@ static int rtas_msi_init(void) } arch_initcall(rtas_msi_init); -static void quirk_radeon(struct pci_dev *dev) -{ - struct pci_dn *pdn = get_pdn(dev); - - if (pdn) - pdn->force_32bit_msi = 1; -} -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x68f2, quirk_radeon); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0xaa68, quirk_radeon); -- cgit v0.10.2 From 83920c498ebb51cbd62f26f72e87c04a2a46dec9 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 21 May 2013 23:00:22 +0000 Subject: powerpc/powernv: Build a zImage.epapr The zImage.epapr wrapper allows to use zImages when booting via a flat device-tree which can be used on powernv. Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/platforms/powernv/Kconfig b/arch/powerpc/platforms/powernv/Kconfig index d3e840d..c24684c 100644 --- a/arch/powerpc/platforms/powernv/Kconfig +++ b/arch/powerpc/platforms/powernv/Kconfig @@ -6,6 +6,7 @@ config PPC_POWERNV select PPC_ICP_NATIVE select PPC_P7_NAP select PPC_PCI_CHOICE if EMBEDDED + select EPAPR_BOOT default y config POWERNV_MSI -- cgit v0.10.2 From f1dd153121dcb872ae6cba8d52bec97519eb7d97 Mon Sep 17 00:00:00 2001 From: Brian King Date: Wed, 22 May 2013 11:07:46 +0000 Subject: powerpc/pseries: Make 32-bit MSI quirk work on systems lacking firmware support Recent commit e61133dda480062d221f09e4fc18f66763f8ecd0 added support for a new firmware feature to force an adapter to use 32 bit MSIs. However, this firmware is not available for all systems. The hack below allows devices needing 32 bit MSIs to work on these systems as well. It is careful to only enable this on Gen2 slots, which should limit this to configurations where this hack is needed and tested to work. [Small change to factor out the hack into a separate function -- BenH] Signed-off-by: Brian King Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c index d34f4ff..6d2f0ab 100644 --- a/arch/powerpc/platforms/pseries/msi.c +++ b/arch/powerpc/platforms/pseries/msi.c @@ -374,6 +374,23 @@ static int check_msix_entries(struct pci_dev *pdev) return 0; } +static void rtas_hack_32bit_msi_gen2(struct pci_dev *pdev) +{ + u32 addr_hi, addr_lo; + + /* + * We should only get in here for IODA1 configs. This is based on the + * fact that we using RTAS for MSIs, we don't have the 32 bit MSI RTAS + * support, and we are in a PCIe Gen2 slot. + */ + dev_info(&pdev->dev, + "rtas_msi: No 32 bit MSI firmware support, forcing 32 bit MSI\n"); + pci_read_config_dword(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_HI, &addr_hi); + addr_lo = 0xffff0000 | ((addr_hi >> (48 - 32)) << 4); + pci_write_config_dword(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_LO, addr_lo); + pci_write_config_dword(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_HI, 0); +} + static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec_in, int type) { struct pci_dn *pdn; @@ -381,6 +398,7 @@ static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec_in, int type) struct msi_desc *entry; struct msi_msg msg; int nvec = nvec_in; + int use_32bit_msi_hack = 0; pdn = pci_get_pdn(pdev); if (!pdn) @@ -408,15 +426,31 @@ static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec_in, int type) */ again: if (type == PCI_CAP_ID_MSI) { - if (pdn->force_32bit_msi) + if (pdn->force_32bit_msi) { rc = rtas_change_msi(pdn, RTAS_CHANGE_32MSI_FN, nvec); - else + if (rc < 0) { + /* + * We only want to run the 32 bit MSI hack below if + * the max bus speed is Gen2 speed + */ + if (pdev->bus->max_bus_speed != PCIE_SPEED_5_0GT) + return rc; + + use_32bit_msi_hack = 1; + } + } else + rc = -1; + + if (rc < 0) rc = rtas_change_msi(pdn, RTAS_CHANGE_MSI_FN, nvec); - if (rc < 0 && !pdn->force_32bit_msi) { + if (rc < 0) { pr_debug("rtas_msi: trying the old firmware call.\n"); rc = rtas_change_msi(pdn, RTAS_CHANGE_FN, nvec); } + + if (use_32bit_msi_hack && rc > 0) + rtas_hack_32bit_msi_gen2(pdev); } else rc = rtas_change_msi(pdn, RTAS_CHANGE_MSIX_FN, nvec); -- cgit v0.10.2 From 029efddab6967f755c21f47b0bc456f1a546805f Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Fri, 24 May 2013 00:59:16 +0200 Subject: ARM: at91: at91sam9n12: move external irq declatation to DT Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 3de8e6d..8d25f88 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -57,6 +57,7 @@ compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; + atmel,external-irqs = <31>; }; ramc0: ramc@ffffe800 { diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c index 13cdbcd..c7d670d 100644 --- a/arch/arm/mach-at91/at91sam9n12.c +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -223,13 +223,7 @@ static void __init at91sam9n12_map_io(void) at91_init_sram(0, AT91SAM9N12_SRAM_BASE, AT91SAM9N12_SRAM_SIZE); } -void __init at91sam9n12_initialize(void) -{ - at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0); -} - AT91_SOC_START(at91sam9n12) .map_io = at91sam9n12_map_io, .register_clocks = at91sam9n12_register_clocks, - .init = at91sam9n12_initialize, AT91_SOC_END -- cgit v0.10.2 From f6d35d67d0a5c159f767a20f4fcc1d295a7314b1 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Thu, 23 May 2013 18:01:21 +0200 Subject: ARM: at91/dt: fix macb pinctrl_macb_rmii_mii_alt definition The PA24 pin is wrongly assigned to peripheral B. In the current config there is 2 ETX3 pins (PA11 and PA24) and no ETXER pin (PA22). Signed-off-by: Boris BREZILLON Signed-off-by: Nicolas Ferre Cc: stable # 3.8+ diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 70b5ccb..84c4bef 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -264,7 +264,7 @@ atmel,pins = <0 10 0x2 0x0 /* PA10 periph B */ 0 11 0x2 0x0 /* PA11 periph B */ - 0 24 0x2 0x0 /* PA24 periph B */ + 0 22 0x2 0x0 /* PA22 periph B */ 0 25 0x2 0x0 /* PA25 periph B */ 0 26 0x2 0x0 /* PA26 periph B */ 0 27 0x2 0x0 /* PA27 periph B */ -- cgit v0.10.2 From 144ea15e4fefbee14a7dcb05c7cd0822fda3ebf6 Mon Sep 17 00:00:00 2001 From: Josh Wu Date: Thu, 23 May 2013 10:18:48 +0000 Subject: ARM: at91/sama5: fix incorrect PMC pcr div definition Signed-off-by: Josh Wu Acked-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Ludovic Desroches Signed-off-by: Nicolas Ferre diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index 31df120..2bd7f51 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -179,9 +179,9 @@ extern void __iomem *at91_pmc_base; #define AT91_PMC_PCR_CMD (0x1 << 12) /* Command (read=0, write=1) */ #define AT91_PMC_PCR_DIV(n) ((n) << 16) /* Divisor Value */ #define AT91_PMC_PCR_DIV0 0x0 /* Peripheral clock is MCK */ -#define AT91_PMC_PCR_DIV2 0x2 /* Peripheral clock is MCK/2 */ -#define AT91_PMC_PCR_DIV4 0x4 /* Peripheral clock is MCK/4 */ -#define AT91_PMC_PCR_DIV8 0x8 /* Peripheral clock is MCK/8 */ +#define AT91_PMC_PCR_DIV2 0x1 /* Peripheral clock is MCK/2 */ +#define AT91_PMC_PCR_DIV4 0x2 /* Peripheral clock is MCK/4 */ +#define AT91_PMC_PCR_DIV8 0x3 /* Peripheral clock is MCK/8 */ #define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */ #endif -- cgit v0.10.2 From 37f715774e2dd9ae521334dbbc3af63becd47adb Mon Sep 17 00:00:00 2001 From: Bob Peterson Date: Fri, 10 May 2013 11:59:18 -0400 Subject: GFS2: two minor quota fixups This patch fixes two regression problems that Abhi found in the GFS2 quota code. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c index c7c840e..c253b13 100644 --- a/fs/gfs2/quota.c +++ b/fs/gfs2/quota.c @@ -121,7 +121,7 @@ static u64 qd2index(struct gfs2_quota_data *qd) { struct kqid qid = qd->qd_id; return (2 * (u64)from_kqid(&init_user_ns, qid)) + - (qid.type == USRQUOTA) ? 0 : 1; + ((qid.type == USRQUOTA) ? 0 : 1); } static u64 qd2offset(struct gfs2_quota_data *qd) @@ -721,7 +721,7 @@ get_a_page: goto unlock_out; } - gfs2_trans_add_meta(ip->i_gl, bh); + gfs2_trans_add_data(ip->i_gl, bh); kaddr = kmap_atomic(page); if (offset + sizeof(struct gfs2_quota) > PAGE_CACHE_SIZE) -- cgit v0.10.2 From af21ca8ed50f01c5278c5ded6dad6f05e8a5d2e4 Mon Sep 17 00:00:00 2001 From: Bob Peterson Date: Tue, 14 May 2013 13:04:29 -0400 Subject: GFS2: Use single-block reservations for directories This patch changes the multi-block allocation code, such that directory inodes only get a single block reserved in the bitmap. That way, the bitmaps are more tightly packed together, and there are fewer spans of free blocks for in-use block reservations. This means it takes less time to find a free span of blocks in the bitmap, which speeds things up. This increases the performance of some workloads by almost 2X. In Nate's mockup.py script (which does (1) create dir, (2) create dir in dir, (3) create file in that dir) the test executes in 23 steps rather than 43 steps, a 47% performance improvement. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index 0c5a575..5232525 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -1401,9 +1401,14 @@ static void rg_mblk_search(struct gfs2_rgrpd *rgd, struct gfs2_inode *ip, u32 extlen; u32 free_blocks = rgd->rd_free_clone - rgd->rd_reserved; int ret; + struct inode *inode = &ip->i_inode; - extlen = max_t(u32, atomic_read(&rs->rs_sizehint), requested); - extlen = clamp(extlen, RGRP_RSRV_MINBLKS, free_blocks); + if (S_ISDIR(inode->i_mode)) + extlen = 1; + else { + extlen = max_t(u32, atomic_read(&rs->rs_sizehint), requested); + extlen = clamp(extlen, RGRP_RSRV_MINBLKS, free_blocks); + } if ((rgd->rd_free_clone < rgd->rd_reserved) || (free_blocks < extlen)) return; -- cgit v0.10.2 From 75f96ce6e754eee30d9ec788ad91c6ec21d0a46b Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 14 May 2013 10:02:48 -0700 Subject: GFS2: fix DLM depends to fix build errors Fix build errors by correcting DLM dependencies in GFS2. Build errors happen when CONFIG_GFS2_FS_LOCKING_DLM=y and CONFIG_DLM=m: fs/built-in.o: In function `gfs2_lock': file.c:(.text+0xc7abd): undefined reference to `dlm_posix_get' file.c:(.text+0xc7ad0): undefined reference to `dlm_posix_unlock' file.c:(.text+0xc7ad9): undefined reference to `dlm_posix_lock' fs/built-in.o: In function `gdlm_unmount': lock_dlm.c:(.text+0xd6e5b): undefined reference to `dlm_release_lockspace' fs/built-in.o: In function `sync_unlock': lock_dlm.c:(.text+0xd6e9e): undefined reference to `dlm_unlock' fs/built-in.o: In function `sync_lock': lock_dlm.c:(.text+0xd6fb6): undefined reference to `dlm_lock' fs/built-in.o: In function `gdlm_put_lock': lock_dlm.c:(.text+0xd7238): undefined reference to `dlm_unlock' fs/built-in.o: In function `gdlm_mount': lock_dlm.c:(.text+0xd753e): undefined reference to `dlm_new_lockspace' lock_dlm.c:(.text+0xd79d3): undefined reference to `dlm_release_lockspace' fs/built-in.o: In function `gdlm_lock': lock_dlm.c:(.text+0xd8179): undefined reference to `dlm_lock' fs/built-in.o: In function `gdlm_cancel': lock_dlm.c:(.text+0xd6b22): undefined reference to `dlm_unlock' Signed-off-by: Randy Dunlap Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/Kconfig b/fs/gfs2/Kconfig index eb08c9e..5a376ab 100644 --- a/fs/gfs2/Kconfig +++ b/fs/gfs2/Kconfig @@ -26,7 +26,7 @@ config GFS2_FS config GFS2_FS_LOCKING_DLM bool "GFS2 DLM locking" depends on (GFS2_FS!=n) && NET && INET && (IPV6 || IPV6=n) && \ - HOTPLUG && DLM && CONFIGFS_FS && SYSFS + HOTPLUG && CONFIGFS_FS && SYSFS && (DLM=y || DLM=GFS2_FS) help Multiple node locking module for GFS2 -- cgit v0.10.2 From e97e548ba8baffe051146d1f5e897dec48da20e0 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Tue, 21 May 2013 12:49:07 +0100 Subject: GFS2: Fix typo in gfs2_log_end_write loop There was a missing _all in this loop iterator Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/lops.c b/fs/gfs2/lops.c index c5fa758..68b4c8f 100644 --- a/fs/gfs2/lops.c +++ b/fs/gfs2/lops.c @@ -212,7 +212,7 @@ static void gfs2_end_log_write(struct bio *bio, int error) fs_err(sdp, "Error %d writing to log\n", error); } - bio_for_each_segment(bvec, bio, i) { + bio_for_each_segment_all(bvec, bio, i) { page = bvec->bv_page; if (page_has_buffers(page)) gfs2_end_log_write_bh(sdp, bvec, error); -- cgit v0.10.2 From 331de00a64e5027365145bdf51da27b9ce15dfd5 Mon Sep 17 00:00:00 2001 From: Sergio Aguirre Date: Thu, 4 Apr 2013 10:32:13 -0700 Subject: xhci-mem: init list heads at the beginning of init It is possible that we fail on xhci_mem_init, just before doing the INIT_LIST_HEAD, and calling xhci_mem_cleanup. Problem is that, the list_for_each_entry_safe macro, assumes list heads are initialized (not NULL), and dereferences their 'next' pointer, causing a kernel panic if this is not yet initialized. Let's protect from that by moving inits to the beginning. This patch should be backported to kernels as old as 3.2, that contain the commit 9574323c39d1f8359a04843075d89c9f32d8b7e6 "xHCI: test USB2 software LPM". Signed-off-by: Sergio Aguirre Acked-by: David Cohen Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 2cfc465..bda2c51 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -2256,6 +2256,9 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) u32 page_size, temp; int i; + INIT_LIST_HEAD(&xhci->lpm_failed_devs); + INIT_LIST_HEAD(&xhci->cancel_cmd_list); + page_size = xhci_readl(xhci, &xhci->op_regs->page_size); xhci_dbg(xhci, "Supported page size register = 0x%x\n", page_size); for (i = 0; i < 16; i++) { @@ -2334,7 +2337,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) xhci->cmd_ring = xhci_ring_alloc(xhci, 1, 1, TYPE_COMMAND, flags); if (!xhci->cmd_ring) goto fail; - INIT_LIST_HEAD(&xhci->cancel_cmd_list); xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring); xhci_dbg(xhci, "First segment DMA is 0x%llx\n", (unsigned long long)xhci->cmd_ring->first_seg->dma); @@ -2445,8 +2447,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) if (xhci_setup_port_arrays(xhci, flags)) goto fail; - INIT_LIST_HEAD(&xhci->lpm_failed_devs); - /* Enable USB 3.0 device notifications for function remote wake, which * is necessary for allowing USB 3.0 devices to do remote wakeup from * U3 (device suspend). -- cgit v0.10.2 From 88696ae432ce7321540ac53d9caab3de9118b094 Mon Sep 17 00:00:00 2001 From: Vladimir Murzin Date: Tue, 9 Apr 2013 22:33:31 +0400 Subject: xhci: fix list access before init If for whatever reason we fall into fail path in xhci_mem_init() before bw table gets initialized we may access the uninitialized lists in xhci_mem_cleanup(). Check for bw table before traversing lists in cleanup routine. This patch should be backported to kernels as old as 3.2, that contain the commit 839c817ce67178ca3c7c7ad534c571bba1e69ebe "xhci: Store information about roothubs and TTs." Reported-by: Sergey Dyasly Tested-by: Sergey Dyasly Signed-off-by: Vladimir Murzin Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index bda2c51..fbf75e5 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1827,6 +1827,9 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) } spin_unlock_irqrestore(&xhci->lock, flags); + if (!xhci->rh_bw) + goto no_bw; + num_ports = HCS_MAX_PORTS(xhci->hcs_params1); for (i = 0; i < num_ports; i++) { struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table; @@ -1845,6 +1848,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) } } +no_bw: xhci->num_usb2_ports = 0; xhci->num_usb3_ports = 0; xhci->num_active_eps = 0; -- cgit v0.10.2 From 726dcaa158b316f02f7dec2cf6dbf61c30a8bf22 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Mon, 20 May 2013 08:12:57 +0100 Subject: arm64: kernel: compiling issue, need 'EXPORT_SYMBOL(clear_page)' Need 'EXPORT_SYMBOL(clear_page)' if building with allmodconfig. The related errors: ERROR: "clear_page" [fs/ocfs2/dlm/ocfs2_dlm.ko] undefined! ERROR: "clear_page" [fs/ntfs/ntfs.ko] undefined! ERROR: "clear_page" [fs/gfs2/gfs2.ko] undefined! ERROR: "clear_page" [fs/fuse/fuse.ko] undefined! ERROR: "clear_page" [fs/ext3/ext3.ko] undefined! ERROR: "clear_page" [fs/ext2/ext2.ko] undefined! ERROR: "clear_page" [fs/exofs/libore.ko] undefined! ERROR: "clear_page" [fs/exofs/exofs.ko] undefined! ERROR: "clear_page" [drivers/block/brd.ko] undefined! Signed-off-by: Chen Gang Signed-off-by: Catalin Marinas diff --git a/arch/arm64/kernel/arm64ksyms.c b/arch/arm64/kernel/arm64ksyms.c index 7df1aad..41b4f62 100644 --- a/arch/arm64/kernel/arm64ksyms.c +++ b/arch/arm64/kernel/arm64ksyms.c @@ -34,6 +34,7 @@ EXPORT_SYMBOL(__strnlen_user); EXPORT_SYMBOL(__strncpy_from_user); EXPORT_SYMBOL(copy_page); +EXPORT_SYMBOL(clear_page); EXPORT_SYMBOL(__copy_from_user); EXPORT_SYMBOL(__copy_to_user); -- cgit v0.10.2 From 953dbbed9ee310100bc841cdea8f992d192531c6 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 21 May 2013 12:16:56 +0100 Subject: arm64: Do not report user faults for handled signals Currently user faults (page, undefined instruction) are always reported even though the user may have a signal handler for them. This patch adds unhandled_signal() check together with printk_ratelimit() for these cases. Signed-off-by: Catalin Marinas diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c index 61d7dd2..f1ff9ba 100644 --- a/arch/arm64/kernel/traps.c +++ b/arch/arm64/kernel/traps.c @@ -267,7 +267,8 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs) return; #endif - if (show_unhandled_signals) { + if (show_unhandled_signals && unhandled_signal(current, SIGILL) && + printk_ratelimit()) { pr_info("%s[%d]: undefined instruction: pc=%p\n", current->comm, task_pid_nr(current), pc); dump_instr(KERN_INFO, regs); @@ -294,7 +295,7 @@ asmlinkage long do_ni_syscall(struct pt_regs *regs) } #endif - if (show_unhandled_signals) { + if (show_unhandled_signals && printk_ratelimit()) { pr_info("%s[%d]: syscall %d\n", current->comm, task_pid_nr(current), (int)regs->syscallno); dump_instr("", regs); diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index 98af6e7..1426468 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -113,7 +113,8 @@ static void __do_user_fault(struct task_struct *tsk, unsigned long addr, { struct siginfo si; - if (show_unhandled_signals) { + if (show_unhandled_signals && unhandled_signal(tsk, sig) && + printk_ratelimit()) { pr_info("%s[%d]: unhandled %s (%d) at 0x%08lx, esr 0x%03x\n", tsk->comm, task_pid_nr(tsk), fault_name(esr), sig, addr, esr); -- cgit v0.10.2 From 23dd9b2a43698df12f7951e0e5a5fbffd0b3108a Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 23 May 2013 12:20:54 +0200 Subject: ath9k_hw: fix spur mitigation issues on AR934x Do not subtract spur power from noise floor on this chip, as it can lead to packet loss and other connectivity issues. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 2bf6548..e1714d7 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -334,7 +334,8 @@ static void ar9003_hw_spur_ofdm(struct ath_hw *ah, REG_RMW_FIELD(ah, AR_PHY_SPUR_REG, AR_PHY_SPUR_REG_EN_VIT_SPUR_RSSI, 1); - if (REG_READ_FIELD(ah, AR_PHY_MODE, + if (!AR_SREV_9340(ah) && + REG_READ_FIELD(ah, AR_PHY_MODE, AR_PHY_MODE_DYNAMIC) == 0x1) REG_RMW_FIELD(ah, AR_PHY_SPUR_REG, AR_PHY_SPUR_REG_ENABLE_NF_RSSI_SPUR_MIT, 1); -- cgit v0.10.2 From a37a99102e4573145aa60a2f78a690cc8def027c Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 23 May 2013 12:20:55 +0200 Subject: ath9k_hw: fix host interface reset on AR934x If a local bus timeout has been detected, the host interface needs to be reset to clear the errors. AR934x uses a different synchronous interrupt bit to indicate this, so the check needs to be fixed. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 7f25da8..01e97ce 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1306,9 +1306,13 @@ static bool ath9k_hw_set_reset(struct ath_hw *ah, int type) AR_RTC_RC_COLD_RESET | AR_RTC_RC_WARM_RESET; } else { tmpReg = REG_READ(ah, AR_INTR_SYNC_CAUSE); - if (tmpReg & - (AR_INTR_SYNC_LOCAL_TIMEOUT | - AR_INTR_SYNC_RADM_CPL_TIMEOUT)) { + if (AR_SREV_9340(ah)) + tmpReg &= AR9340_INTR_SYNC_LOCAL_TIMEOUT; + else + tmpReg &= AR_INTR_SYNC_LOCAL_TIMEOUT | + AR_INTR_SYNC_RADM_CPL_TIMEOUT; + + if (tmpReg) { u32 val; REG_WRITE(ah, AR_INTR_SYNC_ENABLE, 0); diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index 5c4ab50..9c056a8 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -1007,6 +1007,8 @@ enum { AR_INTR_SYNC_LOCAL_TIMEOUT | AR_INTR_SYNC_MAC_SLEEP_ACCESS), + AR9340_INTR_SYNC_LOCAL_TIMEOUT = 0x00000010, + AR_INTR_SYNC_SPURIOUS = 0xFFFFFFFF, }; -- cgit v0.10.2 From 86c157b3f83597e11d8f03a9dece98d1e77a8ce7 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 23 May 2013 12:20:56 +0200 Subject: ath9k_hw: improve performance for AR934x v1.3+ AR934x v1.3 no longer needs the DCU backoff reduction workaround for preventing rx overruns, but in turn needs the number of usable Tx buffers to be reduced slightly. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 01e97ce..15dfefc 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1172,6 +1172,7 @@ u32 ath9k_regd_get_ctl(struct ath_regulatory *reg, struct ath9k_channel *chan) static inline void ath9k_hw_set_dma(struct ath_hw *ah) { struct ath_common *common = ath9k_hw_common(ah); + int txbuf_size; ENABLE_REGWRITE_BUFFER(ah); @@ -1225,13 +1226,17 @@ static inline void ath9k_hw_set_dma(struct ath_hw *ah) * So set the usable tx buf size also to half to * avoid data/delimiter underruns */ - REG_WRITE(ah, AR_PCU_TXBUF_CTRL, - AR_9285_PCU_TXBUF_CTRL_USABLE_SIZE); - } else if (!AR_SREV_9271(ah)) { - REG_WRITE(ah, AR_PCU_TXBUF_CTRL, - AR_PCU_TXBUF_CTRL_USABLE_SIZE); + txbuf_size = AR_9285_PCU_TXBUF_CTRL_USABLE_SIZE; + } else if (AR_SREV_9340_13_OR_LATER(ah)) { + /* Uses fewer entries for AR934x v1.3+ to prevent rx overruns */ + txbuf_size = AR_9340_PCU_TXBUF_CTRL_USABLE_SIZE; + } else { + txbuf_size = AR_PCU_TXBUF_CTRL_USABLE_SIZE; } + if (!AR_SREV_9271(ah)) + REG_WRITE(ah, AR_PCU_TXBUF_CTRL, txbuf_size); + REGWRITE_BUFFER_FLUSH(ah); if (AR_SREV_9300_20_OR_LATER(ah)) diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c index 498fee0..566109a 100644 --- a/drivers/net/wireless/ath/ath9k/mac.c +++ b/drivers/net/wireless/ath/ath9k/mac.c @@ -410,7 +410,7 @@ bool ath9k_hw_resettxqueue(struct ath_hw *ah, u32 q) REG_WRITE(ah, AR_QMISC(q), AR_Q_MISC_DCU_EARLY_TERM_REQ); - if (AR_SREV_9340(ah)) + if (AR_SREV_9340(ah) && !AR_SREV_9340_13_OR_LATER(ah)) REG_WRITE(ah, AR_DMISC(q), AR_D_MISC_CW_BKOFF_EN | AR_D_MISC_FRAG_WAIT_EN | 0x1); else diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index 9c056a8..f7c90cc 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -798,6 +798,10 @@ #define AR_SREV_REVISION_9485_10 0 #define AR_SREV_REVISION_9485_11 1 #define AR_SREV_VERSION_9340 0x300 +#define AR_SREV_REVISION_9340_10 0 +#define AR_SREV_REVISION_9340_11 1 +#define AR_SREV_REVISION_9340_12 2 +#define AR_SREV_REVISION_9340_13 3 #define AR_SREV_VERSION_9580 0x1C0 #define AR_SREV_REVISION_9580_10 4 /* AR9580 1.0 */ #define AR_SREV_VERSION_9462 0x280 @@ -897,6 +901,10 @@ #define AR_SREV_9340(_ah) \ (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9340)) +#define AR_SREV_9340_13_OR_LATER(_ah) \ + (AR_SREV_9340((_ah)) && \ + ((_ah)->hw_version.macRev >= AR_SREV_REVISION_9340_13)) + #define AR_SREV_9285E_20(_ah) \ (AR_SREV_9285_12_OR_LATER(_ah) && \ ((REG_READ(_ah, AR_AN_SYNTH9) & 0x7) == 0x1)) @@ -1883,6 +1891,7 @@ enum { #define AR_PCU_TXBUF_CTRL_SIZE_MASK 0x7FF #define AR_PCU_TXBUF_CTRL_USABLE_SIZE 0x700 #define AR_9285_PCU_TXBUF_CTRL_USABLE_SIZE 0x380 +#define AR_9340_PCU_TXBUF_CTRL_USABLE_SIZE 0x500 #define AR_PCU_MISC_MODE2 0x8344 #define AR_PCU_MISC_MODE2_MGMT_CRYPTO_ENABLE 0x00000002 -- cgit v0.10.2 From 62106e96279f66c52e2123782f9420af9dbe8cbe Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Tue, 7 May 2013 11:28:31 -0400 Subject: cifs: only set ops for inodes in I_NEW state It's generally not safe to reset the inode ops once they've been set. In the case where the inode was originally thought to be a directory and then later found to be a DFS referral, this can lead to an oops when we try to trigger an inode op on it after changing the ops to the blank referral operations. Cc: Reported-and-Tested-by: Sachin Prabhu Signed-off-by: Jeff Layton Signed-off-by: Steve French Signed-off-by: Steve French diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index fc30251..20efd81 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -171,7 +171,8 @@ cifs_fattr_to_inode(struct inode *inode, struct cifs_fattr *fattr) if (fattr->cf_flags & CIFS_FATTR_DFS_REFERRAL) inode->i_flags |= S_AUTOMOUNT; - cifs_set_ops(inode); + if (inode->i_state & I_NEW) + cifs_set_ops(inode); } void -- cgit v0.10.2 From 166faf21bd14bc5c5295a44874bf7f3930c30b20 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 24 May 2013 07:40:04 -0400 Subject: cifs: fix potential buffer overrun when composing a new options string Consider the case where we have a very short ip= string in the original mount options, and when we chase a referral we end up with a very long IPv6 address. Be sure to allow for that possibility when estimating the size of the string to allocate. Cc: Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c index 8e33ec6..8e5a181 100644 --- a/fs/cifs/cifs_dfs_ref.c +++ b/fs/cifs/cifs_dfs_ref.c @@ -18,6 +18,7 @@ #include #include #include +#include #include "cifsglob.h" #include "cifsproto.h" #include "cifsfs.h" @@ -150,7 +151,8 @@ char *cifs_compose_mount_options(const char *sb_mountdata, * assuming that we have 'unc=' and 'ip=' in * the original sb_mountdata */ - md_len = strlen(sb_mountdata) + rc + strlen(ref->node_name) + 12; + md_len = strlen(sb_mountdata) + rc + strlen(ref->node_name) + 12 + + INET6_ADDRSTRLEN; mountdata = kzalloc(md_len+1, GFP_KERNEL); if (mountdata == NULL) { rc = -ENOMEM; -- cgit v0.10.2 From 539673fff76af73c3aee96e0de10edcc97d84db3 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 24 May 2013 07:40:04 -0400 Subject: cifs: allow sec=none mounts to work against servers that don't support extended security In the case of sec=none, we're not sending a username or password, so there's little benefit to mandating NTLMSSP auth. Allow it to use unencapsulated auth in that case. Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 99eeaa1..0a7fdc3 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1061,6 +1061,7 @@ static int cifs_parse_security_flavors(char *value, #endif case Opt_sec_none: vol->nullauth = 1; + vol->secFlg |= CIFSSEC_MAY_NTLM; break; default: cifs_dbg(VFS, "bad security option: %s\n", value); -- cgit v0.10.2 From 37d4f99b55d46d9f71f4769faf74c95adb2c1daf Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 24 May 2013 07:40:05 -0400 Subject: cifs: fix error handling when calling cifs_parse_devname When we allowed separate unc= and prefixpath= mount options, we could ignore EINVAL errors from cifs_parse_devname. Now that they are deprecated, we need to check for that as well and fail the mount if it's malformed. Also fix a later error message that refers to the unc= option. Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 0a7fdc3..5b97e56 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1258,14 +1258,18 @@ cifs_parse_mount_options(const char *mountdata, const char *devname, vol->backupuid_specified = false; /* no backup intent for a user */ vol->backupgid_specified = false; /* no backup intent for a group */ - /* - * For now, we ignore -EINVAL errors under the assumption that the - * unc= and prefixpath= options will be usable. - */ - if (cifs_parse_devname(devname, vol) == -ENOMEM) { - printk(KERN_ERR "CIFS: Unable to allocate memory to parse " - "device string.\n"); - goto out_nomem; + switch (cifs_parse_devname(devname, vol)) { + case 0: + break; + case -ENOMEM: + cifs_dbg(VFS, "Unable to allocate memory for devname.\n"); + goto cifs_parse_mount_err; + case -EINVAL: + cifs_dbg(VFS, "Malformed UNC in devname.\n"); + goto cifs_parse_mount_err; + default: + cifs_dbg(VFS, "Unknown error parsing devname.\n"); + goto cifs_parse_mount_err; } while ((data = strsep(&options, separator)) != NULL) { @@ -1827,7 +1831,7 @@ cifs_parse_mount_options(const char *mountdata, const char *devname, } #endif if (!vol->UNC) { - cifs_dbg(VFS, "CIFS mount error: No usable UNC path provided in device string or in unc= option!\n"); + cifs_dbg(VFS, "CIFS mount error: No usable UNC path provided in device string!\n"); goto cifs_parse_mount_err; } -- cgit v0.10.2 From 9c9c29e1af2ff0459087876e3800078555794b60 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 24 May 2013 07:40:05 -0400 Subject: cifs: stop printing the unc= option in /proc/mounts Since we no longer recognize that option, stop printing it out. The devicename is now the canonical source for this info. Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 72e4efe..3752b9f 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -372,9 +372,6 @@ cifs_show_options(struct seq_file *s, struct dentry *root) cifs_show_security(s, tcon->ses->server); cifs_show_cache_flavor(s, cifs_sb); - seq_printf(s, ",unc="); - seq_escape(s, tcon->treeName, " \t\n\\"); - if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MULTIUSER) seq_printf(s, ",multiuser"); else if (tcon->ses->user_name) -- cgit v0.10.2 From d9deef0a3f38bcc1c155e8d9a8b522404e5e648c Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 24 May 2013 07:40:06 -0400 Subject: cifs: fix composing of mount options for DFS referrals With the change to ignore the unc= and prefixpath= mount options, there is no longer any need to add them to the options string when mounting. By the same token, we now need to build a device name that includes the prefixpath when mounting. To make things neater, the delimiters on the devicename are changed to '/' since that's preferred when mounting anyway. v2: fix some comments and don't bother looking at whether there is a prepath in the ref->node_name when deciding whether to pass a prepath to cifs_build_devname. v3: rebase on top of potential buffer overrun fix for stable Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c index 8e5a181..58df174 100644 --- a/fs/cifs/cifs_dfs_ref.c +++ b/fs/cifs/cifs_dfs_ref.c @@ -49,58 +49,74 @@ void cifs_dfs_release_automount_timer(void) } /** - * cifs_get_share_name - extracts share name from UNC - * @node_name: pointer to UNC string + * cifs_build_devname - build a devicename from a UNC and optional prepath + * @nodename: pointer to UNC string + * @prepath: pointer to prefixpath (or NULL if there isn't one) * - * Extracts sharename form full UNC. - * i.e. strips from UNC trailing path that is not part of share - * name and fixup missing '\' in the beginning of DFS node refferal - * if necessary. - * Returns pointer to share name on success or ERR_PTR on error. - * Caller is responsible for freeing returned string. + * Build a new cifs devicename after chasing a DFS referral. Allocate a buffer + * big enough to hold the final thing. Copy the UNC from the nodename, and + * concatenate the prepath onto the end of it if there is one. + * + * Returns pointer to the built string, or a ERR_PTR. Caller is responsible + * for freeing the returned string. */ -static char *cifs_get_share_name(const char *node_name) +static char * +cifs_build_devname(char *nodename, const char *prepath) { - int len; - char *UNC; - char *pSep; - - len = strlen(node_name); - UNC = kmalloc(len+2 /*for term null and additional \ if it's missed */, - GFP_KERNEL); - if (!UNC) - return ERR_PTR(-ENOMEM); + size_t pplen; + size_t unclen; + char *dev; + char *pos; + + /* skip over any preceding delimiters */ + nodename += strspn(nodename, "\\"); + if (!*nodename) + return ERR_PTR(-EINVAL); - /* get share name and server name */ - if (node_name[1] != '\\') { - UNC[0] = '\\'; - strncpy(UNC+1, node_name, len); - len++; - UNC[len] = 0; - } else { - strncpy(UNC, node_name, len); - UNC[len] = 0; - } + /* get length of UNC and set pos to last char */ + unclen = strlen(nodename); + pos = nodename + unclen - 1; - /* find server name end */ - pSep = memchr(UNC+2, '\\', len-2); - if (!pSep) { - cifs_dbg(VFS, "%s: no server name end in node name: %s\n", - __func__, node_name); - kfree(UNC); - return ERR_PTR(-EINVAL); + /* trim off any trailing delimiters */ + while (*pos == '\\') { + --pos; + --unclen; } - /* find sharename end */ - pSep++; - pSep = memchr(UNC+(pSep-UNC), '\\', len-(pSep-UNC)); - if (pSep) { - /* trim path up to sharename end - * now we have share name in UNC */ - *pSep = 0; + /* allocate a buffer: + * +2 for preceding "//" + * +1 for delimiter between UNC and prepath + * +1 for trailing NULL + */ + pplen = prepath ? strlen(prepath) : 0; + dev = kmalloc(2 + unclen + 1 + pplen + 1, GFP_KERNEL); + if (!dev) + return ERR_PTR(-ENOMEM); + + pos = dev; + /* add the initial "//" */ + *pos = '/'; + ++pos; + *pos = '/'; + ++pos; + + /* copy in the UNC portion from referral */ + memcpy(pos, nodename, unclen); + pos += unclen; + + /* copy the prefixpath remainder (if there is one) */ + if (pplen) { + *pos = '/'; + ++pos; + memcpy(pos, prepath, pplen); + pos += pplen; } - return UNC; + /* NULL terminator */ + *pos = '\0'; + + convert_delimiter(dev, '/'); + return dev; } @@ -124,6 +140,7 @@ char *cifs_compose_mount_options(const char *sb_mountdata, { int rc; char *mountdata = NULL; + const char *prepath = NULL; int md_len; char *tkn_e; char *srvIP = NULL; @@ -133,7 +150,10 @@ char *cifs_compose_mount_options(const char *sb_mountdata, if (sb_mountdata == NULL) return ERR_PTR(-EINVAL); - *devname = cifs_get_share_name(ref->node_name); + if (strlen(fullpath) - ref->path_consumed) + prepath = fullpath + ref->path_consumed; + + *devname = cifs_build_devname(ref->node_name, prepath); if (IS_ERR(*devname)) { rc = PTR_ERR(*devname); *devname = NULL; @@ -147,13 +167,14 @@ char *cifs_compose_mount_options(const char *sb_mountdata, goto compose_mount_options_err; } - /* md_len = strlen(...) + 12 for 'sep+prefixpath=' - * assuming that we have 'unc=' and 'ip=' in - * the original sb_mountdata + /* + * In most cases, we'll be building a shorter string than the original, + * but we do have to assume that the address in the ip= option may be + * much longer than the original. Add the max length of an address + * string to the length of the original string to allow for worst case. */ - md_len = strlen(sb_mountdata) + rc + strlen(ref->node_name) + 12 + - INET6_ADDRSTRLEN; - mountdata = kzalloc(md_len+1, GFP_KERNEL); + md_len = strlen(sb_mountdata) + INET6_ADDRSTRLEN; + mountdata = kzalloc(md_len + 1, GFP_KERNEL); if (mountdata == NULL) { rc = -ENOMEM; goto compose_mount_options_err; @@ -197,26 +218,6 @@ char *cifs_compose_mount_options(const char *sb_mountdata, strncat(mountdata, &sep, 1); strcat(mountdata, "ip="); strcat(mountdata, srvIP); - strncat(mountdata, &sep, 1); - strcat(mountdata, "unc="); - strcat(mountdata, *devname); - - /* find & copy prefixpath */ - tkn_e = strchr(ref->node_name + 2, '\\'); - if (tkn_e == NULL) { - /* invalid unc, missing share name*/ - rc = -EINVAL; - goto compose_mount_options_err; - } - - tkn_e = strchr(tkn_e + 1, '\\'); - if (tkn_e || (strlen(fullpath) - ref->path_consumed)) { - strncat(mountdata, &sep, 1); - strcat(mountdata, "prefixpath="); - if (tkn_e) - strcat(mountdata, tkn_e + 1); - strcat(mountdata, fullpath + ref->path_consumed); - } /*cifs_dbg(FYI, "%s: parent mountdata: %s\n", __func__, sb_mountdata);*/ /*cifs_dbg(FYI, "%s: submount mountdata: %s\n", __func__, mountdata );*/ diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c index e7512e4..7ede730 100644 --- a/fs/cifs/dns_resolve.c +++ b/fs/cifs/dns_resolve.c @@ -34,7 +34,7 @@ /** * dns_resolve_server_name_to_ip - Resolve UNC server name to ip address. - * @unc: UNC path specifying the server + * @unc: UNC path specifying the server (with '/' as delimiter) * @ip_addr: Where to return the IP address. * * The IP address will be returned in string form, and the caller is @@ -64,7 +64,7 @@ dns_resolve_server_name_to_ip(const char *unc, char **ip_addr) hostname = unc + 2; /* Search for server name delimiter */ - sep = memchr(hostname, '\\', len); + sep = memchr(hostname, '/', len); if (sep) len = sep - hostname; else -- cgit v0.10.2 From 70ef5578dd8011eeafa999a18194d9b548a4d889 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sun, 5 May 2013 22:08:22 +0000 Subject: MPILIB: disable usage of floating point registers on parisc The umul_ppmm() macro for parisc uses the xmpyu assembler statement which does calculation via a floating point register. But usage of floating point registers inside the Linux kernel are not allowed and gcc will stop compilation due to the -mdisable-fpregs compiler option. Fix this by disabling the umul_ppmm() and udiv_qrnnd() macros. The mpilib will then use the generic built-in implementations instead. Signed-off-by: Helge Deller diff --git a/lib/mpi/longlong.h b/lib/mpi/longlong.h index 095ab15..d411355 100644 --- a/lib/mpi/longlong.h +++ b/lib/mpi/longlong.h @@ -318,7 +318,8 @@ extern UDItype __udiv_qrnnd(); "rM" ((USItype)(bh)), \ "rM" ((USItype)(al)), \ "rM" ((USItype)(bl))) -#if defined(_PA_RISC1_1) +#if 0 && defined(_PA_RISC1_1) +/* xmpyu uses floating point register which is not allowed in Linux kernel. */ #define umul_ppmm(wh, wl, u, v) \ do { \ union {UDItype __ll; \ @@ -337,7 +338,7 @@ do { \ #define UMUL_TIME 40 #define UDIV_TIME 80 #endif -#ifndef LONGLONG_STANDALONE +#if 0 /* #ifndef LONGLONG_STANDALONE */ #define udiv_qrnnd(q, r, n1, n0, d) \ do { USItype __r; \ (q) = __udiv_qrnnd(&__r, (n1), (n0), (d)); \ -- cgit v0.10.2 From 949451b9b19da5e998778eb78929aafc73b5c227 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 16 May 2013 20:42:39 +0000 Subject: parisc: add rp5470 entry to machine database Signed-off-by: Helge Deller diff --git a/arch/parisc/kernel/hardware.c b/arch/parisc/kernel/hardware.c index f7752f6..9e2d2e4 100644 --- a/arch/parisc/kernel/hardware.c +++ b/arch/parisc/kernel/hardware.c @@ -222,6 +222,7 @@ static struct hp_hardware hp_hardware_list[] = { {HPHW_NPROC,0x5DD,0x4,0x81,"Duet W2"}, {HPHW_NPROC,0x5DE,0x4,0x81,"Piccolo W+"}, {HPHW_NPROC,0x5DF,0x4,0x81,"Cantata W2"}, + {HPHW_NPROC,0x5DF,0x0,0x00,"Marcato W+? (rp5470)"}, {HPHW_NPROC,0x5E0,0x4,0x91,"Cantata DC- W2"}, {HPHW_NPROC,0x5E1,0x4,0x91,"Crescendo DC- W2"}, {HPHW_NPROC,0x5E2,0x4,0x91,"Crescendo 650 W2"}, -- cgit v0.10.2 From d845b5fb36edbd16563bde49ae1217b3f5132eec Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 16 May 2013 20:51:41 +0000 Subject: parisc: use PAGE_SHIFT instead of hardcoded value 12 in pacache.S additionally clean up some whitespaces & tabs. Signed-off-by: Helge Deller diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S index 5e1de60..36d7f40 100644 --- a/arch/parisc/kernel/pacache.S +++ b/arch/parisc/kernel/pacache.S @@ -605,14 +605,14 @@ ENTRY(copy_user_page_asm) convert_phys_for_tlb_insert20 %r26 /* convert phys addr to tlb insert format */ convert_phys_for_tlb_insert20 %r23 /* convert phys addr to tlb insert format */ depd %r24,63,22, %r28 /* Form aliased virtual address 'to' */ - depdi 0, 63,PAGE_SHIFT, %r28 /* Clear any offset bits */ + depdi 0, 63,PAGE_SHIFT, %r28 /* Clear any offset bits */ copy %r28, %r29 depdi 1, 41,1, %r29 /* Form aliased virtual address 'from' */ #else extrw,u %r26, 24,25, %r26 /* convert phys addr to tlb insert format */ extrw,u %r23, 24,25, %r23 /* convert phys addr to tlb insert format */ depw %r24, 31,22, %r28 /* Form aliased virtual address 'to' */ - depwi 0, 31,12, %r28 /* Clear any offset bits */ + depwi 0, 31,PAGE_SHIFT, %r28 /* Clear any offset bits */ copy %r28, %r29 depwi 1, 9,1, %r29 /* Form aliased virtual address 'from' */ #endif @@ -762,7 +762,7 @@ ENTRY(clear_user_page_asm) #else extrw,u %r26, 24,25, %r26 /* convert phys addr to tlb insert format */ depw %r25, 31,22, %r28 /* Form aliased virtual address 'to' */ - depwi 0, 31,12, %r28 /* Clear any offset bits */ + depwi 0, 31,PAGE_SHIFT, %r28 /* Clear any offset bits */ #endif /* Purge any old translation */ @@ -846,7 +846,7 @@ ENTRY(flush_dcache_page_asm) #else extrw,u %r26, 24,25, %r26 /* convert phys addr to tlb insert format */ depw %r25, 31,22, %r28 /* Form aliased virtual address 'to' */ - depwi 0, 31,12, %r28 /* Clear any offset bits */ + depwi 0, 31,PAGE_SHIFT, %r28 /* Clear any offset bits */ #endif /* Purge any old translation */ @@ -918,11 +918,11 @@ ENTRY(flush_icache_page_asm) #endif convert_phys_for_tlb_insert20 %r26 /* convert phys addr to tlb insert format */ depd %r25, 63,22, %r28 /* Form aliased virtual address 'to' */ - depdi 0, 63,PAGE_SHIFT, %r28 /* Clear any offset bits */ + depdi 0, 63,PAGE_SHIFT, %r28 /* Clear any offset bits */ #else extrw,u %r26, 24,25, %r26 /* convert phys addr to tlb insert format */ depw %r25, 31,22, %r28 /* Form aliased virtual address 'to' */ - depwi 0, 31,12, %r28 /* Clear any offset bits */ + depwi 0, 31,PAGE_SHIFT, %r28 /* Clear any offset bits */ #endif /* Purge any old translation */ -- cgit v0.10.2 From fbb46caa1bd2d99079a24f8a6ae0b33655e42fae Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 16 May 2013 21:00:16 +0000 Subject: parisc: add additional parisc git tree to MAINTAINERS file Signed-off-by: Helge Deller diff --git a/MAINTAINERS b/MAINTAINERS index b645a3d..fd3a495 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6084,6 +6084,7 @@ L: linux-parisc@vger.kernel.org W: http://www.parisc-linux.org/ Q: http://patchwork.kernel.org/project/linux-parisc/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git S: Maintained F: arch/parisc/ F: drivers/parisc/ -- cgit v0.10.2 From d0c3be806a3fe7f4abdb0f7e7287addb55e73f35 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sat, 18 May 2013 19:35:44 +0000 Subject: parisc: show number of FPE and unaligned access handler calls in /proc/interrupts Show number of floating point assistant and unaligned access fixup handler in /proc/interrupts file. Signed-off-by: Helge Deller diff --git a/arch/parisc/include/asm/hardirq.h b/arch/parisc/include/asm/hardirq.h index c19f713..4c6dd8d 100644 --- a/arch/parisc/include/asm/hardirq.h +++ b/arch/parisc/include/asm/hardirq.h @@ -28,6 +28,8 @@ typedef struct { unsigned int irq_resched_count; unsigned int irq_call_count; #endif + unsigned int irq_unaligned_count; + unsigned int irq_fpassist_count; unsigned int irq_tlb_count; } ____cacheline_aligned irq_cpustat_t; diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index 55237a7..9c2d953 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -188,6 +188,14 @@ int arch_show_interrupts(struct seq_file *p, int prec) seq_printf(p, "%10u ", irq_stats(j)->irq_call_count); seq_puts(p, " Function call interrupts\n"); #endif + seq_printf(p, "%*s: ", prec, "UAH"); + for_each_online_cpu(j) + seq_printf(p, "%10u ", irq_stats(j)->irq_unaligned_count); + seq_puts(p, " Unaligned access handler traps\n"); + seq_printf(p, "%*s: ", prec, "FPA"); + for_each_online_cpu(j) + seq_printf(p, "%10u ", irq_stats(j)->irq_fpassist_count); + seq_puts(p, " Floating point assist traps\n"); seq_printf(p, "%*s: ", prec, "TLB"); for_each_online_cpu(j) seq_printf(p, "%10u ", irq_stats(j)->irq_tlb_count); diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c index fe41a98..04e47c6 100644 --- a/arch/parisc/kernel/traps.c +++ b/arch/parisc/kernel/traps.c @@ -646,6 +646,7 @@ void notrace handle_interruption(int code, struct pt_regs *regs) case 14: /* Assist Exception Trap, i.e. floating point exception. */ die_if_kernel("Floating point exception", regs, 0); /* quiet */ + __inc_irq_stat(irq_fpassist_count); handle_fpe(regs); return; diff --git a/arch/parisc/kernel/unaligned.c b/arch/parisc/kernel/unaligned.c index 234e368..d7c0acb 100644 --- a/arch/parisc/kernel/unaligned.c +++ b/arch/parisc/kernel/unaligned.c @@ -27,6 +27,7 @@ #include #include #include +#include /* #define DEBUG_UNALIGNED 1 */ @@ -454,6 +455,8 @@ void handle_unaligned(struct pt_regs *regs) struct siginfo si; register int flop=0; /* true if this is a flop */ + __inc_irq_stat(irq_unaligned_count); + /* log a message with pacing */ if (user_mode(regs)) { if (current->thread.flags & PARISC_UAC_SIGBUS) { -- cgit v0.10.2 From b63a2bbc0b9b106a93e11952ab057e2408f2eb02 Mon Sep 17 00:00:00 2001 From: John David Anglin Date: Mon, 20 May 2013 16:42:53 +0000 Subject: parisc: make interrupt and interruption stack allocation reentrant The get_stack_use_cr30 and get_stack_use_r30 macros allocate a stack frame for external interrupts and interruptions requiring a stack frame. They are currently not reentrant in that they save register context before the stack is set or adjusted. I have observed a number of system crashes where there was clear evidence of stack corruption during interrupt processing, and as a result register corruption. Some interruptions can still occur during interruption processing, however external interrupts are disabled and data TLB misses don't occur for absolute accesses. So, it's not entirely clear what triggers this issue. Also, if an interruption occurs when Q=0, it is generally not possible to recover as the shadowed registers are not copied. The attached patch reworks the get_stack_use_cr30 and get_stack_use_r30 macros to allocate stack before doing register saves. The new code is a couple of instructions shorter than the old implementation. Thus, it's an improvement even if it doesn't fully resolve the stack corruption issue. Based on limited testing, it improves SMP system stability. Signed-off-by: John David Anglin Signed-off-by: Helge Deller diff --git a/arch/parisc/include/asm/assembly.h b/arch/parisc/include/asm/assembly.h index 89fb400..0da8482 100644 --- a/arch/parisc/include/asm/assembly.h +++ b/arch/parisc/include/asm/assembly.h @@ -438,7 +438,6 @@ SAVE_SP (%sr4, PT_SR4 (\regs)) SAVE_SP (%sr5, PT_SR5 (\regs)) SAVE_SP (%sr6, PT_SR6 (\regs)) - SAVE_SP (%sr7, PT_SR7 (\regs)) SAVE_CR (%cr17, PT_IASQ0(\regs)) mtctl %r0, %cr17 diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index ae27cb6..e8f07dd 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -65,15 +65,11 @@ rsm PSW_SM_I, %r0 /* barrier for "Relied upon Translation */ mtsp %r0, %sr4 mtsp %r0, %sr5 - mfsp %sr7, %r1 - or,= %r0,%r1,%r0 /* Only save sr7 in sr3 if sr7 != 0 */ - mtsp %r1, %sr3 + mtsp %r0, %sr6 tovirt_r1 %r29 load32 KERNEL_PSW, %r1 rsm PSW_SM_QUIET,%r0 /* second "heavy weight" ctl op */ - mtsp %r0, %sr6 - mtsp %r0, %sr7 mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ mtctl %r1, %ipsw @@ -119,17 +115,20 @@ /* we save the registers in the task struct */ + copy %r30, %r17 mfctl %cr30, %r1 + ldo THREAD_SZ_ALGN(%r1), %r30 + mtsp %r0,%sr7 + mtsp %r16,%sr3 tophys %r1,%r9 LDREG TI_TASK(%r9), %r1 /* thread_info -> task_struct */ tophys %r1,%r9 ldo TASK_REGS(%r9),%r9 - STREG %r30, PT_GR30(%r9) + STREG %r17,PT_GR30(%r9) STREG %r29,PT_GR29(%r9) STREG %r26,PT_GR26(%r9) + STREG %r16,PT_SR7(%r9) copy %r9,%r29 - mfctl %cr30, %r1 - ldo THREAD_SZ_ALGN(%r1), %r30 .endm .macro get_stack_use_r30 @@ -137,10 +136,12 @@ /* we put a struct pt_regs on the stack and save the registers there */ tophys %r30,%r9 - STREG %r30,PT_GR30(%r9) + copy %r30,%r1 ldo PT_SZ_ALGN(%r30),%r30 + STREG %r1,PT_GR30(%r9) STREG %r29,PT_GR29(%r9) STREG %r26,PT_GR26(%r9) + STREG %r16,PT_SR7(%r9) copy %r9,%r29 .endm -- cgit v0.10.2 From 2c2d32bed1a1bb6121494965b31badb280f04b0e Mon Sep 17 00:00:00 2001 From: Peter Huewe Date: Mon, 20 May 2013 20:56:45 +0000 Subject: parisc/superio: Use module_pci_driver to register driver Removing some boilerplate by using module_pci_driver instead of calling register and unregister in the otherwise empty init/exit functions. Signed-off-by: Peter Huewe Signed-off-by: Helge Deller diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c index ac6e8e7..a042d06 100644 --- a/drivers/parisc/superio.c +++ b/drivers/parisc/superio.c @@ -494,15 +494,4 @@ static struct pci_driver superio_driver = { .probe = superio_probe, }; -static int __init superio_modinit(void) -{ - return pci_register_driver(&superio_driver); -} - -static void __exit superio_exit(void) -{ - pci_unregister_driver(&superio_driver); -} - -module_init(superio_modinit); -module_exit(superio_exit); +module_pci_driver(superio_driver); -- cgit v0.10.2 From e9b376671910d105c5e61103111b96209c729529 Mon Sep 17 00:00:00 2001 From: Vahram Martirosyan Date: Fri, 24 May 2013 13:57:12 +0500 Subject: jfs: Several bugs in jfs_freeze() and jfs_unfreeze() The mentioned functions do not pay attention to the error codes returned by the functions updateSuper(), lmLogInit() and lmLogShutdown(). It brings to system crash later when writing to log. The patch adds corresponding code to check and return the error codes and to print correct error messages in case of errors. Found by Linux File System Verification project (linuxtesting.org). Signed-off-by: Vahram Martirosyan Reviewed-by: Gu Zheng Signed-off-by: Dave Kleikamp diff --git a/fs/jfs/super.c b/fs/jfs/super.c index 2003e83..788e0a9 100644 --- a/fs/jfs/super.c +++ b/fs/jfs/super.c @@ -611,11 +611,28 @@ static int jfs_freeze(struct super_block *sb) { struct jfs_sb_info *sbi = JFS_SBI(sb); struct jfs_log *log = sbi->log; + int rc = 0; if (!(sb->s_flags & MS_RDONLY)) { txQuiesce(sb); - lmLogShutdown(log); - updateSuper(sb, FM_CLEAN); + rc = lmLogShutdown(log); + if (rc) { + jfs_error(sb, "jfs_freeze: lmLogShutdown failed"); + + /* let operations fail rather than hang */ + txResume(sb); + + return rc; + } + rc = updateSuper(sb, FM_CLEAN); + if (rc) { + jfs_err("jfs_freeze: updateSuper failed\n"); + /* + * Don't fail here. Everything succeeded except + * marking the superblock clean, so there's really + * no harm in leaving it frozen for now. + */ + } } return 0; } @@ -627,13 +644,18 @@ static int jfs_unfreeze(struct super_block *sb) int rc = 0; if (!(sb->s_flags & MS_RDONLY)) { - updateSuper(sb, FM_MOUNT); - if ((rc = lmLogInit(log))) - jfs_err("jfs_unlock failed with return code %d", rc); - else - txResume(sb); + rc = updateSuper(sb, FM_MOUNT); + if (rc) { + jfs_error(sb, "jfs_unfreeze: updateSuper failed"); + goto out; + } + rc = lmLogInit(log); + if (rc) + jfs_error(sb, "jfs_unfreeze: lmLogInit failed"); +out: + txResume(sb); } - return 0; + return rc; } static struct dentry *jfs_do_mount(struct file_system_type *fs_type, -- cgit v0.10.2 From 95bbb82f60c80808e5a49d8233c2de8451901531 Mon Sep 17 00:00:00 2001 From: Gu Zheng Date: Thu, 23 May 2013 16:14:19 +0800 Subject: fs/jfs: Add check if journaling to disk has been disabled in lbmRead() Signed-off-by: Gu Zheng Signed-off-by: Dave Kleikamp diff --git a/fs/jfs/jfs_logmgr.c b/fs/jfs/jfs_logmgr.c index c57499d..360d27c 100644 --- a/fs/jfs/jfs_logmgr.c +++ b/fs/jfs/jfs_logmgr.c @@ -2009,7 +2009,13 @@ static int lbmRead(struct jfs_log * log, int pn, struct lbuf ** bpp) bio->bi_end_io = lbmIODone; bio->bi_private = bp; - submit_bio(READ_SYNC, bio); + /*check if journaling to disk has been disabled*/ + if (log->no_integrity) { + bio->bi_size = 0; + lbmIODone(bio, 0); + } else { + submit_bio(READ_SYNC, bio); + } wait_event(bp->l_ioevent, (bp->l_flag != lbmREAD)); -- cgit v0.10.2 From 480d7467e4aaa3dc38088baf56bc3eb3599f5d26 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 20 May 2013 09:51:08 +1000 Subject: xfs: fix sub-page blocksize data integrity writes FSX on 512 byte block size filesystems has been failing for some time with corrupted data. The fault dates back to the change in the writeback data integrity algorithm that uses a mark-and-sweep approach to avoid data writeback livelocks. Unfortunately, a side effect of this mark-and-sweep approach is that each page will only be written once for a data integrity sync, and there is a condition in writeback in XFS where a page may require two writeback attempts to be fully written. As a result of the high level change, we now only get a partial page writeback during the integrity sync because the first pass through writeback clears the mark left on the page index to tell writeback that the page needs writeback.... The cause is writing a partial page in the clustering code. This can happen when a mapping boundary falls in the middle of a page - we end up writing back the first part of the page that the mapping covers, but then never revisit the page to have the remainder mapped and written. The fix is simple - if the mapping boundary falls inside a page, then simple abort clustering without touching the page. This means that the next ->writepage entry that write_cache_pages() will make is the page we aborted on, and xfs_vm_writepage() will map all sections of the page correctly. This behaviour is also optimal for non-data integrity writes, as it results in contiguous sequential writeback of the file rather than missing small holes and having to write them a "random" writes in a future pass. With this fix, all the fsx tests in xfstests now pass on a 512 byte block size filesystem on a 4k page machine. Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Signed-off-by: Ben Myers (cherry picked from commit 49b137cbbcc836ef231866c137d24f42c42bb483) diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c index 2b2691b..41a6950 100644 --- a/fs/xfs/xfs_aops.c +++ b/fs/xfs/xfs_aops.c @@ -725,6 +725,25 @@ xfs_convert_page( (xfs_off_t)(page->index + 1) << PAGE_CACHE_SHIFT, i_size_read(inode)); + /* + * If the current map does not span the entire page we are about to try + * to write, then give up. The only way we can write a page that spans + * multiple mappings in a single writeback iteration is via the + * xfs_vm_writepage() function. Data integrity writeback requires the + * entire page to be written in a single attempt, otherwise the part of + * the page we don't write here doesn't get written as part of the data + * integrity sync. + * + * For normal writeback, we also don't attempt to write partial pages + * here as it simply means that write_cache_pages() will see it under + * writeback and ignore the page until some point in the future, at + * which time this will be the only page in the file that needs + * writeback. Hence for more optimal IO patterns, we should always + * avoid partial page writeback due to multiple mappings on a page here. + */ + if (!xfs_imap_valid(inode, imap, end_offset)) + goto fail_unlock_page; + len = 1 << inode->i_blkbits; p_offset = min_t(unsigned long, end_offset & (PAGE_CACHE_SIZE - 1), PAGE_CACHE_SIZE); -- cgit v0.10.2 From 68a433f18c0574b50c5952978ca95b0db7347174 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Sat, 25 May 2013 06:27:29 +0900 Subject: ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC This patch extends exynos_init_time() function to handle Exynos4210 rev0 SoC, which differs in availability of system timers and needs different clocksource initialization. This makes it possible to use exynos_init_time() function as init_time callback for all Exynos-based boards, including Universal_C210, which originally had to use samsung_timer_init(). Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index d19edff..ff18fc2 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -250,6 +250,7 @@ config MACH_ARMLEX4210 config MACH_UNIVERSAL_C210 bool "Mobile UNIVERSAL_C210 Board" select CLKSRC_MMIO + select CLKSRC_SAMSUNG_PWM select CPU_EXYNOS4210 select EXYNOS4_SETUP_FIMC select EXYNOS4_SETUP_FIMD0 @@ -281,7 +282,6 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_TV select S5P_GPIO_INT select S5P_SETUP_MIPIPHY - select SAMSUNG_HRT help Machine support for Samsung Mobile Universal S5PC210 Reference Board. @@ -410,6 +410,7 @@ config MACH_EXYNOS4_DT depends on ARCH_EXYNOS4 select ARM_AMBA select CLKSRC_OF + select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210 select CPU_EXYNOS4210 select KEYBOARD_SAMSUNG if INPUT_KEYBOARD select PINCTRL diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 745e304..a2d2012 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -10,12 +10,14 @@ */ #include +#include #include #include #include #include #include #include +#include #include #include #include @@ -302,6 +304,13 @@ static struct map_desc exynos5440_iodesc0[] __initdata = { }, }; +static struct samsung_pwm_variant exynos4_pwm_variant = { + .bits = 32, + .div_base = 0, + .has_tint_cstat = true, + .tclk_mask = 0, +}; + void exynos4_restart(char mode, const char *cmd) { __raw_writel(0x1, S5P_SWRESET); @@ -442,8 +451,20 @@ static void __init exynos5440_map_io(void) iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0)); } +void __init exynos_set_timer_source(u8 channels) +{ + exynos4_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1; + exynos4_pwm_variant.output_mask &= ~channels; +} + void __init exynos_init_time(void) { + unsigned int timer_irqs[SAMSUNG_PWM_NUM] = { + EXYNOS4_IRQ_TIMER0_VIC, EXYNOS4_IRQ_TIMER1_VIC, + EXYNOS4_IRQ_TIMER2_VIC, EXYNOS4_IRQ_TIMER3_VIC, + EXYNOS4_IRQ_TIMER4_VIC, + }; + if (of_have_populated_dt()) { #ifdef CONFIG_OF of_clk_init(NULL); @@ -455,7 +476,14 @@ void __init exynos_init_time(void) exynos4_clk_init(NULL, !soc_is_exynos4210(), S5P_VA_CMU, readl(S5P_VA_CHIPID + 8) & 1); exynos4_clk_register_fixed_ext(xxti_f, xusbxti_f); #endif - mct_init(S5P_VA_SYSTIMER, EXYNOS4_IRQ_MCT_G0, EXYNOS4_IRQ_MCT_L0, EXYNOS4_IRQ_MCT_L1); +#ifdef CONFIG_CLKSRC_SAMSUNG_PWM + if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0) + samsung_pwm_clocksource_init(S3C_VA_TIMER, + timer_irqs, &exynos4_pwm_variant); + else +#endif + mct_init(S5P_VA_SYSTIMER, EXYNOS4_IRQ_MCT_G0, + EXYNOS4_IRQ_MCT_L0, EXYNOS4_IRQ_MCT_L1); } } diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 60dd35c..11fc1e2 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -32,6 +32,8 @@ void exynos4_clk_register_fixed_ext(unsigned long, unsigned long); void exynos_firmware_init(void); +void exynos_set_timer_source(u8 channels); + #ifdef CONFIG_PM_GENERIC_DOMAINS int exynos_pm_late_initcall(void); #else diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 327d50d..74ddb2b 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -41,7 +41,6 @@ #include #include #include -#include #include #include @@ -1094,7 +1093,7 @@ static void __init universal_map_io(void) { exynos_init_io(NULL, 0); s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); - samsung_set_timer_source(SAMSUNG_PWM2, SAMSUNG_PWM4); + exynos_set_timer_source(BIT(2) | BIT(4)); xxti_f = 0; xusbxti_f = 24000000; } @@ -1154,7 +1153,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") .map_io = universal_map_io, .init_machine = universal_machine_init, .init_late = exynos_init_late, - .init_time = samsung_timer_init, + .init_time = exynos_init_time, .reserve = &universal_reserve, .restart = exynos4_restart, MACHINE_END -- cgit v0.10.2 From 7031d0e1c46e2b1c869458233dd216cb72af41b2 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 20 May 2013 09:51:09 +1000 Subject: xfs: fix rounding in xfs_free_file_space The offset passed into xfs_free_file_space() needs to be rounded down to a certain size, but the rounding mask is built by a 32 bit variable. Hence the mask will always mask off the upper 32 bits of the offset and lead to incorrect writeback and invalidation ranges. This is not actually exposed as a bug because we writeback and invalidate from the rounded offset to the end of the file, and hence the offset we are actually punching a hole out of will always be covered by the code. This needs fixing, however, if we ever want to use exact ranges for writeback/invalidation here... Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Signed-off-by: Ben Myers (cherry picked from commit 28ca489c63e9aceed8801d2f82d731b3c9aa50f5) diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index 1501f4f..0176bb2 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -1453,7 +1453,7 @@ xfs_free_file_space( xfs_mount_t *mp; int nimap; uint resblks; - uint rounding; + xfs_off_t rounding; int rt; xfs_fileoff_t startoffset_fsb; xfs_trans_t *tp; @@ -1482,7 +1482,7 @@ xfs_free_file_space( inode_dio_wait(VFS_I(ip)); } - rounding = max_t(uint, 1 << mp->m_sb.sb_blocklog, PAGE_CACHE_SIZE); + rounding = max_t(xfs_off_t, 1 << mp->m_sb.sb_blocklog, PAGE_CACHE_SIZE); ioffset = offset & ~(rounding - 1); error = -filemap_write_and_wait_range(VFS_I(ip)->i_mapping, ioffset, -1); -- cgit v0.10.2 From 509e708a8929c5b75a16c985c03db5329e09cad4 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 20 May 2013 09:51:10 +1000 Subject: xfs: Don't reference the EFI after it is freed Checking the EFI for whether it is being released from recovery after we've already released the known active reference is a mistake worthy of a brown paper bag. Fix the (now) obvious use after free that it can cause. Reported-by: Dave Jones Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Signed-off-by: Ben Myers (cherry picked from commit 52c24ad39ff02d7bd73c92eb0c926fb44984a41d) diff --git a/fs/xfs/xfs_extfree_item.c b/fs/xfs/xfs_extfree_item.c index c0f3750..452920a 100644 --- a/fs/xfs/xfs_extfree_item.c +++ b/fs/xfs/xfs_extfree_item.c @@ -305,11 +305,12 @@ xfs_efi_release(xfs_efi_log_item_t *efip, { ASSERT(atomic_read(&efip->efi_next_extent) >= nextents); if (atomic_sub_and_test(nextents, &efip->efi_next_extent)) { - __xfs_efi_release(efip); - /* recovery needs us to drop the EFI reference, too */ if (test_bit(XFS_EFI_RECOVERED, &efip->efi_flags)) __xfs_efi_release(efip); + + __xfs_efi_release(efip); + /* efip may now have been freed, do not reference it again. */ } } -- cgit v0.10.2 From d96b51ec14650b490ab98e738bcc02309396e5bc Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Fri, 24 May 2013 21:27:35 +0000 Subject: parisc: fix irq stack on UP and SMP The logic to detect if the irq stack was already in use with raw_spin_trylock() is wrong, because it will generate a "trylock failure on UP" error message with CONFIG_SMP=n and CONFIG_DEBUG_SPINLOCK=y. arch_spin_trylock() can't be used either since in the CONFIG_SMP=n case no atomic protection is given and we are reentrant here. A mutex didn't worked either and brings more overhead by turning off interrupts. So, let's use the fastest path for parisc which is the ldcw instruction. Counting how often the irq stack was used is pretty useless, so just drop this piece of code. Signed-off-by: Helge Deller diff --git a/arch/parisc/include/asm/hardirq.h b/arch/parisc/include/asm/hardirq.h index 4c6dd8d..241c345 100644 --- a/arch/parisc/include/asm/hardirq.h +++ b/arch/parisc/include/asm/hardirq.h @@ -17,13 +17,8 @@ typedef struct { unsigned int __softirq_pending; -#ifdef CONFIG_DEBUG_STACKOVERFLOW unsigned int kernel_stack_usage; -#ifdef CONFIG_IRQSTACKS unsigned int irq_stack_usage; - unsigned int irq_stack_counter; -#endif -#endif #ifdef CONFIG_SMP unsigned int irq_resched_count; unsigned int irq_call_count; diff --git a/arch/parisc/include/asm/processor.h b/arch/parisc/include/asm/processor.h index cfbc439..cc2290a 100644 --- a/arch/parisc/include/asm/processor.h +++ b/arch/parisc/include/asm/processor.h @@ -17,7 +17,6 @@ #include #include #include - #endif /* __ASSEMBLY__ */ /* @@ -59,26 +58,6 @@ #ifndef __ASSEMBLY__ /* - * IRQ STACK - used for irq handler - */ -#ifdef __KERNEL__ - -#include - -#define IRQ_STACK_SIZE (4096 << 2) /* 16k irq stack size */ - -union irq_stack_union { - unsigned long stack[IRQ_STACK_SIZE/sizeof(unsigned long)]; - raw_spinlock_t lock; -}; - -DECLARE_PER_CPU(union irq_stack_union, irq_stack_union); - -void call_on_stack(unsigned long p1, void *func, unsigned long new_stack); - -#endif /* __KERNEL__ */ - -/* * Data detected about CPUs at boot time which is the same for all CPU's. * HP boxes are SMP - ie identical processors. * diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index 9c2d953..2e6443b 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -27,11 +27,11 @@ #include #include #include -#include #include #include #include +#include #undef PARISC_IRQ_CR16_COUNTS @@ -172,10 +172,6 @@ int arch_show_interrupts(struct seq_file *p, int prec) for_each_online_cpu(j) seq_printf(p, "%10u ", irq_stats(j)->irq_stack_usage); seq_puts(p, " Interrupt stack usage\n"); - seq_printf(p, "%*s: ", prec, "ISC"); - for_each_online_cpu(j) - seq_printf(p, "%10u ", irq_stats(j)->irq_stack_counter); - seq_puts(p, " Interrupt stack usage counter\n"); # endif #endif #ifdef CONFIG_SMP @@ -384,6 +380,24 @@ static inline int eirr_to_irq(unsigned long eirr) return (BITS_PER_LONG - bit) + TIMER_IRQ; } +#ifdef CONFIG_IRQSTACKS +/* + * IRQ STACK - used for irq handler + */ +#define IRQ_STACK_SIZE (4096 << 2) /* 16k irq stack size */ + +union irq_stack_union { + unsigned long stack[IRQ_STACK_SIZE/sizeof(unsigned long)]; + volatile unsigned int slock[4]; + volatile unsigned int lock[1]; +}; + +DEFINE_PER_CPU(union irq_stack_union, irq_stack_union) = { + .slock = { 1,1,1,1 }, + }; +#endif + + int sysctl_panic_on_stackoverflow = 1; static inline void stack_overflow_check(struct pt_regs *regs) @@ -450,27 +464,26 @@ panic_check: } #ifdef CONFIG_IRQSTACKS -DEFINE_PER_CPU(union irq_stack_union, irq_stack_union) = { - .lock = __RAW_SPIN_LOCK_UNLOCKED((irq_stack_union).lock) - }; +/* in entry.S: */ +void call_on_stack(unsigned long p1, void *func, unsigned long new_stack); static void execute_on_irq_stack(void *func, unsigned long param1) { union irq_stack_union *union_ptr; unsigned long irq_stack; - raw_spinlock_t *irq_stack_in_use; + volatile unsigned int *irq_stack_in_use; union_ptr = &per_cpu(irq_stack_union, smp_processor_id()); irq_stack = (unsigned long) &union_ptr->stack; - irq_stack = ALIGN(irq_stack + sizeof(irq_stack_union.lock), + irq_stack = ALIGN(irq_stack + sizeof(irq_stack_union.slock), 64); /* align for stack frame usage */ /* We may be called recursive. If we are already using the irq stack, * just continue to use it. Use spinlocks to serialize * the irq stack usage. */ - irq_stack_in_use = &union_ptr->lock; - if (!raw_spin_trylock(irq_stack_in_use)) { + irq_stack_in_use = (volatile unsigned int *)__ldcw_align(union_ptr); + if (!__ldcw(irq_stack_in_use)) { void (*direct_call)(unsigned long p1) = func; /* We are using the IRQ stack already. @@ -482,10 +495,8 @@ static void execute_on_irq_stack(void *func, unsigned long param1) /* This is where we switch to the IRQ stack. */ call_on_stack(param1, func, irq_stack); - __inc_irq_stat(irq_stack_counter); - /* free up irq stack usage. */ - do_raw_spin_unlock(irq_stack_in_use); + *irq_stack_in_use = 1; } asmlinkage void do_softirq(void) -- cgit v0.10.2 From b17cb364dbbbf65add79f1610599d01bcb6851f9 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 20 May 2013 09:51:12 +1000 Subject: xfs: fix missing KM_NOFS tags to keep lockdep happy There are several places where we use KM_SLEEP allocation contexts and use the fact that they are called from transaction context to add KM_NOFS where appropriate. Unfortunately, there are several places where the code makes this assumption but can be called from outside transaction context but with filesystem locks held. These places need explicit KM_NOFS annotations to avoid lockdep complaining about reclaim contexts. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit ac14876cf9255175bf3bdad645bf8aa2b8fb2d7c) diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c index 82b70bd..0d25542 100644 --- a/fs/xfs/xfs_buf.c +++ b/fs/xfs/xfs_buf.c @@ -1649,7 +1649,7 @@ xfs_alloc_buftarg( { xfs_buftarg_t *btp; - btp = kmem_zalloc(sizeof(*btp), KM_SLEEP); + btp = kmem_zalloc(sizeof(*btp), KM_SLEEP | KM_NOFS); btp->bt_mount = mp; btp->bt_dev = bdev->bd_dev; diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c index 9b26a99..41ea7e1 100644 --- a/fs/xfs/xfs_da_btree.c +++ b/fs/xfs/xfs_da_btree.c @@ -2464,7 +2464,8 @@ xfs_buf_map_from_irec( ASSERT(nirecs >= 1); if (nirecs > 1) { - map = kmem_zalloc(nirecs * sizeof(struct xfs_buf_map), KM_SLEEP); + map = kmem_zalloc(nirecs * sizeof(struct xfs_buf_map), + KM_SLEEP | KM_NOFS); if (!map) return ENOMEM; *mapp = map; @@ -2520,7 +2521,8 @@ xfs_dabuf_map( * Optimize the one-block case. */ if (nfsb != 1) - irecs = kmem_zalloc(sizeof(irec) * nfsb, KM_SLEEP); + irecs = kmem_zalloc(sizeof(irec) * nfsb, + KM_SLEEP | KM_NOFS); nirecs = nfsb; error = xfs_bmapi_read(dp, (xfs_fileoff_t)bno, nfsb, irecs, diff --git a/fs/xfs/xfs_dir2_leaf.c b/fs/xfs/xfs_dir2_leaf.c index 721ba2f..da71a18 100644 --- a/fs/xfs/xfs_dir2_leaf.c +++ b/fs/xfs/xfs_dir2_leaf.c @@ -1336,7 +1336,7 @@ xfs_dir2_leaf_getdents( mp->m_sb.sb_blocksize); map_info = kmem_zalloc(offsetof(struct xfs_dir2_leaf_map_info, map) + (length * sizeof(struct xfs_bmbt_irec)), - KM_SLEEP); + KM_SLEEP | KM_NOFS); map_info->map_size = length; /* diff --git a/fs/xfs/xfs_log_cil.c b/fs/xfs/xfs_log_cil.c index e3d0b85..d0833b5 100644 --- a/fs/xfs/xfs_log_cil.c +++ b/fs/xfs/xfs_log_cil.c @@ -139,7 +139,7 @@ xlog_cil_prepare_log_vecs( new_lv = kmem_zalloc(sizeof(*new_lv) + niovecs * sizeof(struct xfs_log_iovec), - KM_SLEEP); + KM_SLEEP|KM_NOFS); /* The allocated iovec region lies beyond the log vector. */ new_lv->lv_iovecp = (struct xfs_log_iovec *)&new_lv[1]; -- cgit v0.10.2 From 7ced60cae46cb37273a03c196e6f473b089bd8e1 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 20 May 2013 09:51:13 +1000 Subject: xfs: xfs_da3_node_read_verify() doesn't handle XFS_ATTR3_LEAF_MAGIC Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 72916fb8cbcf0c2928f56cdc2fbe8c7bf5517758) diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c index 41ea7e1..0b8b2a1 100644 --- a/fs/xfs/xfs_da_btree.c +++ b/fs/xfs/xfs_da_btree.c @@ -270,6 +270,7 @@ xfs_da3_node_read_verify( break; return; case XFS_ATTR_LEAF_MAGIC: + case XFS_ATTR3_LEAF_MAGIC: bp->b_ops = &xfs_attr3_leaf_buf_ops; bp->b_ops->verify_read(bp); return; -- cgit v0.10.2 From cf257abf02709dba3cc745d950f144ce49432b4f Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 20 May 2013 09:51:14 +1000 Subject: xfs: xfs_attr_shortform_allfit() does not handle attr3 format. xfstests generic/117 fails with: XFS: Assertion failed: leaf->hdr.info.magic == cpu_to_be16(XFS_ATTR_LEAF_MAGIC) indicating a function that does not handle the attr3 format correctly. Fix it. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit b38958d715316031fe9ea0cc6c22043072a55f49) diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index 08d5457..8eeb88f 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -931,20 +931,22 @@ xfs_attr_shortform_list(xfs_attr_list_context_t *context) */ int xfs_attr_shortform_allfit( - struct xfs_buf *bp, - struct xfs_inode *dp) + struct xfs_buf *bp, + struct xfs_inode *dp) { - xfs_attr_leafblock_t *leaf; - xfs_attr_leaf_entry_t *entry; + struct xfs_attr_leafblock *leaf; + struct xfs_attr_leaf_entry *entry; xfs_attr_leaf_name_local_t *name_loc; - int bytes, i; + struct xfs_attr3_icleaf_hdr leafhdr; + int bytes; + int i; leaf = bp->b_addr; - ASSERT(leaf->hdr.info.magic == cpu_to_be16(XFS_ATTR_LEAF_MAGIC)); + xfs_attr3_leaf_hdr_from_disk(&leafhdr, leaf); + entry = xfs_attr3_leaf_entryp(leaf); - entry = &leaf->entries[0]; bytes = sizeof(struct xfs_attr_sf_hdr); - for (i = 0; i < be16_to_cpu(leaf->hdr.count); entry++, i++) { + for (i = 0; i < leafhdr.count; entry++, i++) { if (entry->flags & XFS_ATTR_INCOMPLETE) continue; /* don't copy partial entries */ if (!(entry->flags & XFS_ATTR_LOCAL)) @@ -954,15 +956,15 @@ xfs_attr_shortform_allfit( return(0); if (be16_to_cpu(name_loc->valuelen) >= XFS_ATTR_SF_ENTSIZE_MAX) return(0); - bytes += sizeof(struct xfs_attr_sf_entry)-1 + bytes += sizeof(struct xfs_attr_sf_entry) - 1 + name_loc->namelen + be16_to_cpu(name_loc->valuelen); } if ((dp->i_mount->m_flags & XFS_MOUNT_ATTR2) && (dp->i_d.di_format != XFS_DINODE_FMT_BTREE) && (bytes == sizeof(struct xfs_attr_sf_hdr))) - return(-1); - return(xfs_attr_shortform_bytesfit(dp, bytes)); + return -1; + return xfs_attr_shortform_bytesfit(dp, bytes); } /* -- cgit v0.10.2 From 7ae077802c9f12959a81fa1a16c1ec2842dbae05 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 20 May 2013 09:51:16 +1000 Subject: xfs: remote attribute lookups require the value length When reading a remote attribute, to correctly calculate the length of the data buffer for CRC enable filesystems, we need to know the length of the attribute data. We get this information when we look up the attribute, but we don't store it in the args structure along with the other remote attr information we get from the lookup. Add this information to the args structure so we can use it appropriately. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit e461fcb194172b3f709e0b478d2ac1bdac7ab9a3) diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index 8eeb88f..0bce1b3 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -2332,9 +2332,10 @@ xfs_attr3_leaf_lookup_int( if (!xfs_attr_namesp_match(args->flags, entry->flags)) continue; args->index = probe; + args->valuelen = be32_to_cpu(name_rmt->valuelen); args->rmtblkno = be32_to_cpu(name_rmt->valueblk); args->rmtblkcnt = XFS_B_TO_FSB(args->dp->i_mount, - be32_to_cpu(name_rmt->valuelen)); + args->valuelen); return XFS_ERROR(EEXIST); } } -- cgit v0.10.2 From 1ba830c9997214a7fbe4d91cf238793764620e3b Mon Sep 17 00:00:00 2001 From: Jungseok Lee Date: Sat, 25 May 2013 06:33:03 +0900 Subject: ARM: EXYNOS: fix software reset logic for EXYNOS5440 SOC This patch fixes software reset logic. Software reset applies only to powered-on domains in SOC because software reset to all domains causes reboot failure. Signed-off-by: Jungseok Lee Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index a2d2012..027c9e7 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -326,9 +326,16 @@ void exynos5_restart(char mode, const char *cmd) val = 0x1; addr = EXYNOS_SWRESET; } else if (of_machine_is_compatible("samsung,exynos5440")) { + u32 status; np = of_find_compatible_node(NULL, NULL, "samsung,exynos5440-clock"); + + addr = of_iomap(np, 0) + 0xbc; + status = __raw_readl(addr); + addr = of_iomap(np, 0) + 0xcc; - val = (0xfff << 20) | (0x1 << 16); + val = __raw_readl(addr); + + val = (val & 0xffff0000) | (status & 0xffff); } else { pr_err("%s: cannot support non-DT\n", __func__); return; -- cgit v0.10.2 From 15f504f0c2038b9a0f1569c9ce34def61f0c65be Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Sat, 25 May 2013 06:49:43 +0900 Subject: ARM: SAMSUNG: Add names to fimd0 IRQ resources Since commit 1977e6d8 (drm/exynos: change the method for getting the interrupt) the Exynos DRM FIMD driver requires IRQ resources to be named. This patch fixes probe failure in non-DT cases by adding appropriate resource names to fimd0 platform device. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 30c2fe2..0f9c3f4 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -311,9 +311,9 @@ struct platform_device s5p_device_jpeg = { #ifdef CONFIG_S5P_DEV_FIMD0 static struct resource s5p_fimd0_resource[] = { [0] = DEFINE_RES_MEM(S5P_PA_FIMD0, SZ_32K), - [1] = DEFINE_RES_IRQ(IRQ_FIMD0_VSYNC), - [2] = DEFINE_RES_IRQ(IRQ_FIMD0_FIFO), - [3] = DEFINE_RES_IRQ(IRQ_FIMD0_SYSTEM), + [1] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_VSYNC, "vsync"), + [2] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_FIFO, "fifo"), + [3] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_SYSTEM, "lcd_sys"), }; struct platform_device s5p_device_fimd0 = { -- cgit v0.10.2 From 77df9e0b799b03e1d5d9c68062709af5f637e834 Mon Sep 17 00:00:00 2001 From: Tony Camuso Date: Thu, 21 Feb 2013 16:11:27 -0500 Subject: xhci - correct comp_mode_recovery_timer on return from hibernate Commit 71c731a2 (usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP Hardware) was a workaround for systems using the SN65LVPE502CP, controller, but it introduced a bug in resume from hibernate. The fix created a timer, comp_mode_recovery_timer, which is deleted from a timer list when xhci_suspend() is called. However, the hibernate image, including the timer list containing the comp_mode_recovery_timer, had already been saved before the timer was deleted. Upon resume from hibernate, the list containing the comp_mode_recovery_timer is restored from the image saved to disk, and xhci_resume(), assuming that the timer had been deleted by xhci_suspend(), makes a call to compliance_mode_recoery_timer_init(), which creates a new instance of the comp_mode_recovery_timer and attempts to place it into the same list in which it is already active, thus corrupting the list during the list_add() call. At this point, a call trace is emitted indicating the list corruption. Soon afterward, the system locks up, the watchdog times out, and the ensuing NMI crashes the system. The problem did not occur when resuming from suspend. In suspend, the image in RAM remains exactly as it was when xhci_suspend() deleted the comp_mode_recovery_timer, so there is no problem when xhci_resume() creates a new instance of this timer and places it in the still empty list. This patch avoids the problem by deleting the timer in xhci_resume() when resuming from hibernate. Now xhci_resume() can safely make the call to create a new instance of this timer, whether returning from suspend or hibernate. Thanks to Alan Stern for his help with understanding the problem. [Sarah reworked this patch to cover the case where the xHCI restore register operation fails, and (temp & STS_SRE) is true (and we re-init the host, including re-init for the compliance mode), but hibernate is false. The original patch would have caused list corruption in this case.] This patch should be backported to kernels as old as 3.2, that contain the commit 71c731a296f1b08a3724bd1b514b64f1bda87a23 "usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP Hardware" Signed-off-by: Tony Camuso Tested-by: Tony Camuso Acked-by: Don Zickus Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index b4aa79d..ae59119 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -956,6 +956,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) struct usb_hcd *hcd = xhci_to_hcd(xhci); struct usb_hcd *secondary_hcd; int retval = 0; + bool comp_timer_running = false; /* Wait a bit if either of the roothubs need to settle from the * transition into bus suspend. @@ -993,6 +994,13 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) /* If restore operation fails, re-initialize the HC during resume */ if ((temp & STS_SRE) || hibernated) { + + if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && + !(xhci_all_ports_seen_u0(xhci))) { + del_timer_sync(&xhci->comp_mode_recovery_timer); + xhci_dbg(xhci, "Compliance Mode Recovery Timer deleted!\n"); + } + /* Let the USB core know _both_ roothubs lost power. */ usb_root_hub_lost_power(xhci->main_hcd->self.root_hub); usb_root_hub_lost_power(xhci->shared_hcd->self.root_hub); @@ -1035,6 +1043,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) retval = xhci_init(hcd->primary_hcd); if (retval) return retval; + comp_timer_running = true; + xhci_dbg(xhci, "Start the primary HCD\n"); retval = xhci_run(hcd->primary_hcd); if (!retval) { @@ -1076,7 +1086,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) * to suffer the Compliance Mode issue again. It doesn't matter if * ports have entered previously to U0 before system's suspension. */ - if (xhci->quirks & XHCI_COMP_MODE_QUIRK) + if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && !comp_timer_running) compliance_mode_recovery_timer_init(xhci); /* Re-enable port polling. */ -- cgit v0.10.2 From c3897aa5386faba77e5bbdf94902a1658d3a5b11 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Thu, 18 Apr 2013 10:02:03 -0700 Subject: xhci: Disable D3cold for buggy TI redrivers. Some xHCI hosts contain a "redriver" from TI that silently drops port status connect changes if the port slips into Compliance Mode. If the port slips into compliance mode while the host is in D0, there will not be a port status change event. If the port slips into compliance mode while the host is in D3, the host will not send a PME. This includes when the system is suspended (S3) or hibernated (S4). If this happens when the system is in S3/S4, there is nothing software can do. Other port status change events that would normally cause the host to wake the system from S3/S4 may also be lost. This includes remote wakeup, disconnects and connects on other ports, and overrcurrent events. A decision was made to _NOT_ disable system suspend/hibernate on these systems, since users are unlikely to enable wakeup from S3/S4 for the xHCI host. Software can deal with this issue when the system is in S0. A work around was put in to poll the port status registers for Compliance Mode. The xHCI driver will continue to poll the registers while the host is runtime suspended. Unfortunately, that means we can't allow the PCI device to go into D3cold, because power will be removed from the host, and the config space will read as all Fs. Disable D3cold in the xHCI PCI runtime suspend function. This patch should be backported to kernels as old as 3.2, that contain the commit 71c731a296f1b08a3724bd1b514b64f1bda87a23 "usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP Hardware" Signed-off-by: Sarah Sharp Cc: Huang Ying Cc: stable@vger.kernel.org diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 1a30c38..cc24e39 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -221,6 +221,14 @@ static void xhci_pci_remove(struct pci_dev *dev) static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + + /* + * Systems with the TI redriver that loses port status change events + * need to have the registers polled during D3, so avoid D3cold. + */ + if (xhci_compliance_mode_recovery_timer_quirk_check()) + pdev->no_d3cold = true; return xhci_suspend(xhci); } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index ae59119..d8f640b 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -466,7 +466,7 @@ static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci) * Systems: * Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820 */ -static bool compliance_mode_recovery_timer_quirk_check(void) +bool xhci_compliance_mode_recovery_timer_quirk_check(void) { const char *dmi_product_name, *dmi_sys_vendor; @@ -517,7 +517,7 @@ int xhci_init(struct usb_hcd *hcd) xhci_dbg(xhci, "Finished xhci_init\n"); /* Initializing Compliance Mode Recovery Data If Needed */ - if (compliance_mode_recovery_timer_quirk_check()) { + if (xhci_compliance_mode_recovery_timer_quirk_check()) { xhci->quirks |= XHCI_COMP_MODE_QUIRK; compliance_mode_recovery_timer_init(xhci); } diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 29c978e..77600ce 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1853,4 +1853,7 @@ struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci, struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx); struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index); +/* xHCI quirks */ +bool xhci_compliance_mode_recovery_timer_quirk_check(void); + #endif /* __LINUX_XHCI_HCD_H */ -- cgit v0.10.2 From c15cddd900e867c5adfb3c79596479dc5975f743 Mon Sep 17 00:00:00 2001 From: Paul Taysom Date: Thu, 23 May 2013 14:31:43 -0700 Subject: ecryptfs: fixed msync to flush data When msync is called on a memory mapped file, that data is not flushed to the disk. In Linux, msync calls fsync for the file. For ecryptfs, fsync just calls the lower level file system's fsync. Changed the ecryptfs fsync code to call filemap_write_and_wait before calling the lower level fsync. Addresses the problem described in http://crbug.com/239536 Signed-off-by: Paul Taysom Signed-off-by: Tyler Hicks Cc: stable@vger.kernel.org # v3.6+ diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c index 201f0a0..16f509d 100644 --- a/fs/ecryptfs/file.c +++ b/fs/ecryptfs/file.c @@ -295,6 +295,7 @@ static int ecryptfs_release(struct inode *inode, struct file *file) static int ecryptfs_fsync(struct file *file, loff_t start, loff_t end, int datasync) { + filemap_write_and_wait(file->f_mapping); return vfs_fsync(ecryptfs_file_to_lower(file), datasync); } -- cgit v0.10.2 From 585dc0c2f68981c02a0bb6fc8fe191a3f513959c Mon Sep 17 00:00:00 2001 From: Gernot Vormayr Date: Fri, 24 May 2013 15:55:03 -0700 Subject: drivers/block/xsysace.c: fix id with missing port-number If the port number is missing from the device-tree the device gets named xs` instead of xsa. This fixes the check for missing ids. Tested on ml507 board. Signed-off-by: Gernot Vormayr Cc: Greg Kroah-Hartman Cc: Jens Axboe Cc: Grant Likely Cc: Rob Herring Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c index f8ef15f..3fd130f 100644 --- a/drivers/block/xsysace.c +++ b/drivers/block/xsysace.c @@ -1160,8 +1160,7 @@ static int ace_probe(struct platform_device *dev) dev_dbg(&dev->dev, "ace_probe(%p)\n", dev); /* device id and bus width */ - of_property_read_u32(dev->dev.of_node, "port-number", &id); - if (id < 0) + if (of_property_read_u32(dev->dev.of_node, "port-number", &id)) id = 0; if (of_find_property(dev->dev.of_node, "8-bit", NULL)) bus_width = ACE_BUS_WIDTH_8; -- cgit v0.10.2 From a11650e11093ed57dca78bf16e7836517c599098 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Fri, 24 May 2013 15:55:05 -0700 Subject: rapidio: make enumeration/discovery configurable Systems that use RapidIO fabric may need to implement their own enumeration and discovery methods which are better suitable for needs of a target application. The following set of patches is intended to simplify process of introduction of new RapidIO fabric enumeration/discovery methods. The first patch offers ability to add new RapidIO enumeration/discovery methods using kernel configuration options. This new configuration option mechanism allows to select statically linked or modular enumeration/discovery method(s) from the list of existing methods or use external module(s). This patch also updates the currently existing enumeration/discovery code to be used as a statically linked or modular method. The corresponding configuration option is named "Basic enumeration/discovery" method. This is the only one configuration option available today but new methods are expected to be introduced after adoption of provided patches. The second patch address a long time complaint of RapidIO subsystem users regarding fabric enumeration/discovery start sequence. Existing implementation offers only a boot-time enumeration/discovery start which requires synchronized boot of all endpoints in RapidIO network. While it works for small closed configurations with limited number of endpoints, using this approach in systems with large number of endpoints is quite challenging. To eliminate requirement for synchronized start the second patch introduces RapidIO enumeration/discovery start from user space. For compatibility with the existing RapidIO subsystem implementation, automatic boot time enumeration/discovery start can be configured in by specifying "rio-scan.scan=1" command line parameter if statically linked basic enumeration method is selected. This patch: Rework to implement RapidIO enumeration/discovery method selection combined with ability to use enumeration/discovery as a kernel module. This patch adds ability to introduce new RapidIO enumeration/discovery methods using kernel configuration options. Configuration option mechanism allows to select statically linked or modular enumeration/discovery method from the list of existing methods or use external modules. If a modular enumeration/discovery is selected each RapidIO mport device can have its own method attached to it. The existing enumeration/discovery code was updated to be used as statically linked or modular method. This configuration option is named "Basic enumeration/discovery" method. Several common routines have been moved from rio-scan.c to make them available to other enumeration methods and reduce number of exported symbols. Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Li Yang Cc: Kumar Gala Cc: Andre van Herk Cc: Micha Nelissen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig index 6194d35..5ab0564 100644 --- a/drivers/rapidio/Kconfig +++ b/drivers/rapidio/Kconfig @@ -47,4 +47,24 @@ config RAPIDIO_DEBUG If you are unsure about this, say N here. +choice + prompt "Enumeration method" + depends on RAPIDIO + default RAPIDIO_ENUM_BASIC + help + There are different enumeration and discovery mechanisms offered + for RapidIO subsystem. You may select single built-in method or + or any number of methods to be built as modules. + Selecting a built-in method disables use of loadable methods. + + If unsure, select Basic built-in. + +config RAPIDIO_ENUM_BASIC + tristate "Basic" + help + This option includes basic RapidIO fabric enumeration and discovery + mechanism similar to one described in RapidIO specification Annex 1. + +endchoice + source "drivers/rapidio/switches/Kconfig" diff --git a/drivers/rapidio/Makefile b/drivers/rapidio/Makefile index ec3fb81..3036702 100644 --- a/drivers/rapidio/Makefile +++ b/drivers/rapidio/Makefile @@ -1,7 +1,8 @@ # # Makefile for RapidIO interconnect services # -obj-y += rio.o rio-access.o rio-driver.o rio-scan.o rio-sysfs.o +obj-y += rio.o rio-access.o rio-driver.o rio-sysfs.o +obj-$(CONFIG_RAPIDIO_ENUM_BASIC) += rio-scan.o obj-$(CONFIG_RAPIDIO) += switches/ obj-$(CONFIG_RAPIDIO) += devices/ diff --git a/drivers/rapidio/rio-driver.c b/drivers/rapidio/rio-driver.c index 0f4a53b..55850bb 100644 --- a/drivers/rapidio/rio-driver.c +++ b/drivers/rapidio/rio-driver.c @@ -164,6 +164,13 @@ void rio_unregister_driver(struct rio_driver *rdrv) driver_unregister(&rdrv->driver); } +void rio_attach_device(struct rio_dev *rdev) +{ + rdev->dev.bus = &rio_bus_type; + rdev->dev.parent = &rio_bus; +} +EXPORT_SYMBOL_GPL(rio_attach_device); + /** * rio_match_bus - Tell if a RIO device structure has a matching RIO driver device id structure * @dev: the standard device structure to match against diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c index a965acd..7bdc674 100644 --- a/drivers/rapidio/rio-scan.c +++ b/drivers/rapidio/rio-scan.c @@ -37,12 +37,8 @@ #include "rio.h" -LIST_HEAD(rio_devices); - static void rio_init_em(struct rio_dev *rdev); -DEFINE_SPINLOCK(rio_global_list_lock); - static int next_destid = 0; static int next_comptag = 1; @@ -327,127 +323,6 @@ static int rio_is_switch(struct rio_dev *rdev) } /** - * rio_switch_init - Sets switch operations for a particular vendor switch - * @rdev: RIO device - * @do_enum: Enumeration/Discovery mode flag - * - * Searches the RIO switch ops table for known switch types. If the vid - * and did match a switch table entry, then call switch initialization - * routine to setup switch-specific routines. - */ -static void rio_switch_init(struct rio_dev *rdev, int do_enum) -{ - struct rio_switch_ops *cur = __start_rio_switch_ops; - struct rio_switch_ops *end = __end_rio_switch_ops; - - while (cur < end) { - if ((cur->vid == rdev->vid) && (cur->did == rdev->did)) { - pr_debug("RIO: calling init routine for %s\n", - rio_name(rdev)); - cur->init_hook(rdev, do_enum); - break; - } - cur++; - } - - if ((cur >= end) && (rdev->pef & RIO_PEF_STD_RT)) { - pr_debug("RIO: adding STD routing ops for %s\n", - rio_name(rdev)); - rdev->rswitch->add_entry = rio_std_route_add_entry; - rdev->rswitch->get_entry = rio_std_route_get_entry; - rdev->rswitch->clr_table = rio_std_route_clr_table; - } - - if (!rdev->rswitch->add_entry || !rdev->rswitch->get_entry) - printk(KERN_ERR "RIO: missing routing ops for %s\n", - rio_name(rdev)); -} - -/** - * rio_add_device- Adds a RIO device to the device model - * @rdev: RIO device - * - * Adds the RIO device to the global device list and adds the RIO - * device to the RIO device list. Creates the generic sysfs nodes - * for an RIO device. - */ -static int rio_add_device(struct rio_dev *rdev) -{ - int err; - - err = device_add(&rdev->dev); - if (err) - return err; - - spin_lock(&rio_global_list_lock); - list_add_tail(&rdev->global_list, &rio_devices); - spin_unlock(&rio_global_list_lock); - - rio_create_sysfs_dev_files(rdev); - - return 0; -} - -/** - * rio_enable_rx_tx_port - enable input receiver and output transmitter of - * given port - * @port: Master port associated with the RIO network - * @local: local=1 select local port otherwise a far device is reached - * @destid: Destination ID of the device to check host bit - * @hopcount: Number of hops to reach the target - * @port_num: Port (-number on switch) to enable on a far end device - * - * Returns 0 or 1 from on General Control Command and Status Register - * (EXT_PTR+0x3C) - */ -inline int rio_enable_rx_tx_port(struct rio_mport *port, - int local, u16 destid, - u8 hopcount, u8 port_num) { -#ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS - u32 regval; - u32 ext_ftr_ptr; - - /* - * enable rx input tx output port - */ - pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = " - "%d, port_num = %d)\n", local, destid, hopcount, port_num); - - ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount); - - if (local) { - rio_local_read_config_32(port, ext_ftr_ptr + - RIO_PORT_N_CTL_CSR(0), - ®val); - } else { - if (rio_mport_read_config_32(port, destid, hopcount, - ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), ®val) < 0) - return -EIO; - } - - if (regval & RIO_PORT_N_CTL_P_TYP_SER) { - /* serial */ - regval = regval | RIO_PORT_N_CTL_EN_RX_SER - | RIO_PORT_N_CTL_EN_TX_SER; - } else { - /* parallel */ - regval = regval | RIO_PORT_N_CTL_EN_RX_PAR - | RIO_PORT_N_CTL_EN_TX_PAR; - } - - if (local) { - rio_local_write_config_32(port, ext_ftr_ptr + - RIO_PORT_N_CTL_CSR(0), regval); - } else { - if (rio_mport_write_config_32(port, destid, hopcount, - ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0) - return -EIO; - } -#endif - return 0; -} - -/** * rio_setup_device- Allocates and sets up a RIO device * @net: RIO network * @port: Master port to send transactions @@ -587,8 +462,7 @@ static struct rio_dev *rio_setup_device(struct rio_net *net, rdev->destid); } - rdev->dev.bus = &rio_bus_type; - rdev->dev.parent = &rio_bus; + rio_attach_device(rdev); device_initialize(&rdev->dev); rdev->dev.release = rio_release_dev; @@ -1421,3 +1295,41 @@ enum_done: bail: return -EBUSY; } + +static struct rio_scan rio_scan_ops = { + .enumerate = rio_enum_mport, + .discover = rio_disc_mport, +}; + +static bool scan; +module_param(scan, bool, 0); +MODULE_PARM_DESC(scan, "Start RapidIO network enumeration/discovery " + "(default = 0)"); + +/** + * rio_basic_attach: + * + * When this enumeration/discovery method is loaded as a module this function + * registers its specific enumeration and discover routines for all available + * RapidIO mport devices. The "scan" command line parameter controls ability of + * the module to start RapidIO enumeration/discovery automatically. + * + * Returns 0 for success or -EIO if unable to register itself. + * + * This enumeration/discovery method cannot be unloaded and therefore does not + * provide a matching cleanup_module routine. + */ + +static int __init rio_basic_attach(void) +{ + if (rio_register_scan(RIO_MPORT_ANY, &rio_scan_ops)) + return -EIO; + if (scan) + rio_init_mports(); + return 0; +} + +late_initcall(rio_basic_attach); + +MODULE_DESCRIPTION("Basic RapidIO enumeration/discovery"); +MODULE_LICENSE("GPL"); diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c index d553b5d..6e75dda 100644 --- a/drivers/rapidio/rio.c +++ b/drivers/rapidio/rio.c @@ -31,7 +31,11 @@ #include "rio.h" +static LIST_HEAD(rio_devices); +static DEFINE_SPINLOCK(rio_global_list_lock); + static LIST_HEAD(rio_mports); +static DEFINE_MUTEX(rio_mport_list_lock); static unsigned char next_portid; static DEFINE_SPINLOCK(rio_mmap_lock); @@ -53,6 +57,32 @@ u16 rio_local_get_device_id(struct rio_mport *port) } /** + * rio_add_device- Adds a RIO device to the device model + * @rdev: RIO device + * + * Adds the RIO device to the global device list and adds the RIO + * device to the RIO device list. Creates the generic sysfs nodes + * for an RIO device. + */ +int rio_add_device(struct rio_dev *rdev) +{ + int err; + + err = device_add(&rdev->dev); + if (err) + return err; + + spin_lock(&rio_global_list_lock); + list_add_tail(&rdev->global_list, &rio_devices); + spin_unlock(&rio_global_list_lock); + + rio_create_sysfs_dev_files(rdev); + + return 0; +} +EXPORT_SYMBOL_GPL(rio_add_device); + +/** * rio_request_inb_mbox - request inbound mailbox service * @mport: RIO master port from which to allocate the mailbox resource * @dev_id: Device specific pointer to pass on event @@ -489,6 +519,7 @@ rio_mport_get_physefb(struct rio_mport *port, int local, return ext_ftr_ptr; } +EXPORT_SYMBOL_GPL(rio_mport_get_physefb); /** * rio_get_comptag - Begin or continue searching for a RIO device by component tag @@ -521,6 +552,7 @@ exit: spin_unlock(&rio_global_list_lock); return rdev; } +EXPORT_SYMBOL_GPL(rio_get_comptag); /** * rio_set_port_lockout - Sets/clears LOCKOUT bit (RIO EM 1.3) for a switch port. @@ -545,6 +577,107 @@ int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock) regval); return 0; } +EXPORT_SYMBOL_GPL(rio_set_port_lockout); + +/** + * rio_switch_init - Sets switch operations for a particular vendor switch + * @rdev: RIO device + * @do_enum: Enumeration/Discovery mode flag + * + * Searches the RIO switch ops table for known switch types. If the vid + * and did match a switch table entry, then call switch initialization + * routine to setup switch-specific routines. + */ +void rio_switch_init(struct rio_dev *rdev, int do_enum) +{ + struct rio_switch_ops *cur = __start_rio_switch_ops; + struct rio_switch_ops *end = __end_rio_switch_ops; + + while (cur < end) { + if ((cur->vid == rdev->vid) && (cur->did == rdev->did)) { + pr_debug("RIO: calling init routine for %s\n", + rio_name(rdev)); + cur->init_hook(rdev, do_enum); + break; + } + cur++; + } + + if ((cur >= end) && (rdev->pef & RIO_PEF_STD_RT)) { + pr_debug("RIO: adding STD routing ops for %s\n", + rio_name(rdev)); + rdev->rswitch->add_entry = rio_std_route_add_entry; + rdev->rswitch->get_entry = rio_std_route_get_entry; + rdev->rswitch->clr_table = rio_std_route_clr_table; + } + + if (!rdev->rswitch->add_entry || !rdev->rswitch->get_entry) + printk(KERN_ERR "RIO: missing routing ops for %s\n", + rio_name(rdev)); +} +EXPORT_SYMBOL_GPL(rio_switch_init); + +/** + * rio_enable_rx_tx_port - enable input receiver and output transmitter of + * given port + * @port: Master port associated with the RIO network + * @local: local=1 select local port otherwise a far device is reached + * @destid: Destination ID of the device to check host bit + * @hopcount: Number of hops to reach the target + * @port_num: Port (-number on switch) to enable on a far end device + * + * Returns 0 or 1 from on General Control Command and Status Register + * (EXT_PTR+0x3C) + */ +int rio_enable_rx_tx_port(struct rio_mport *port, + int local, u16 destid, + u8 hopcount, u8 port_num) +{ +#ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS + u32 regval; + u32 ext_ftr_ptr; + + /* + * enable rx input tx output port + */ + pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = " + "%d, port_num = %d)\n", local, destid, hopcount, port_num); + + ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount); + + if (local) { + rio_local_read_config_32(port, ext_ftr_ptr + + RIO_PORT_N_CTL_CSR(0), + ®val); + } else { + if (rio_mport_read_config_32(port, destid, hopcount, + ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), ®val) < 0) + return -EIO; + } + + if (regval & RIO_PORT_N_CTL_P_TYP_SER) { + /* serial */ + regval = regval | RIO_PORT_N_CTL_EN_RX_SER + | RIO_PORT_N_CTL_EN_TX_SER; + } else { + /* parallel */ + regval = regval | RIO_PORT_N_CTL_EN_RX_PAR + | RIO_PORT_N_CTL_EN_TX_PAR; + } + + if (local) { + rio_local_write_config_32(port, ext_ftr_ptr + + RIO_PORT_N_CTL_CSR(0), regval); + } else { + if (rio_mport_write_config_32(port, destid, hopcount, + ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0) + return -EIO; + } +#endif + return 0; +} +EXPORT_SYMBOL_GPL(rio_enable_rx_tx_port); + /** * rio_chk_dev_route - Validate route to the specified device. @@ -610,6 +743,7 @@ rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid, u8 hopcount) return 0; } +EXPORT_SYMBOL_GPL(rio_mport_chk_dev_access); /** * rio_chk_dev_access - Validate access to the specified device. @@ -941,6 +1075,7 @@ rio_mport_get_efb(struct rio_mport *port, int local, u16 destid, return RIO_GET_BLOCK_ID(reg_val); } } +EXPORT_SYMBOL_GPL(rio_mport_get_efb); /** * rio_mport_get_feature - query for devices' extended features @@ -997,6 +1132,7 @@ rio_mport_get_feature(struct rio_mport * port, int local, u16 destid, return 0; } +EXPORT_SYMBOL_GPL(rio_mport_get_feature); /** * rio_get_asm - Begin or continue searching for a RIO device by vid/did/asm_vid/asm_did @@ -1246,6 +1382,71 @@ EXPORT_SYMBOL_GPL(rio_dma_prep_slave_sg); #endif /* CONFIG_RAPIDIO_DMA_ENGINE */ +/** + * rio_register_scan - enumeration/discovery method registration interface + * @mport_id: mport device ID for which fabric scan routine has to be set + * (RIO_MPORT_ANY = set for all available mports) + * @scan_ops: enumeration/discovery control structure + * + * Assigns enumeration or discovery method to the specified mport device (or all + * available mports if RIO_MPORT_ANY is specified). + * Returns error if the mport already has an enumerator attached to it. + * In case of RIO_MPORT_ANY ignores ports with valid scan routines and returns + * an error if was unable to find at least one available mport. + */ +int rio_register_scan(int mport_id, struct rio_scan *scan_ops) +{ + struct rio_mport *port; + int rc = -EBUSY; + + mutex_lock(&rio_mport_list_lock); + list_for_each_entry(port, &rio_mports, node) { + if (port->id == mport_id || mport_id == RIO_MPORT_ANY) { + if (port->nscan && mport_id == RIO_MPORT_ANY) + continue; + else if (port->nscan) + break; + + port->nscan = scan_ops; + rc = 0; + + if (mport_id != RIO_MPORT_ANY) + break; + } + } + mutex_unlock(&rio_mport_list_lock); + + return rc; +} +EXPORT_SYMBOL_GPL(rio_register_scan); + +/** + * rio_unregister_scan - removes enumeration/discovery method from mport + * @mport_id: mport device ID for which fabric scan routine has to be + * unregistered (RIO_MPORT_ANY = set for all available mports) + * + * Removes enumeration or discovery method assigned to the specified mport + * device (or all available mports if RIO_MPORT_ANY is specified). + */ +int rio_unregister_scan(int mport_id) +{ + struct rio_mport *port; + + mutex_lock(&rio_mport_list_lock); + list_for_each_entry(port, &rio_mports, node) { + if (port->id == mport_id || mport_id == RIO_MPORT_ANY) { + if (port->nscan) + port->nscan = NULL; + if (mport_id != RIO_MPORT_ANY) + break; + } + } + mutex_unlock(&rio_mport_list_lock); + + return 0; +} +EXPORT_SYMBOL_GPL(rio_unregister_scan); + static void rio_fixup_device(struct rio_dev *dev) { } @@ -1274,7 +1475,7 @@ static void disc_work_handler(struct work_struct *_work) work = container_of(_work, struct rio_disc_work, work); pr_debug("RIO: discovery work for mport %d %s\n", work->mport->id, work->mport->name); - rio_disc_mport(work->mport); + work->mport->nscan->discover(work->mport); } int rio_init_mports(void) @@ -1290,12 +1491,15 @@ int rio_init_mports(void) * First, run enumerations and check if we need to perform discovery * on any of the registered mports. */ + mutex_lock(&rio_mport_list_lock); list_for_each_entry(port, &rio_mports, node) { - if (port->host_deviceid >= 0) - rio_enum_mport(port); - else + if (port->host_deviceid >= 0) { + if (port->nscan) + port->nscan->enumerate(port); + } else n++; } + mutex_unlock(&rio_mport_list_lock); if (!n) goto no_disc; @@ -1322,14 +1526,16 @@ int rio_init_mports(void) } n = 0; + mutex_lock(&rio_mport_list_lock); list_for_each_entry(port, &rio_mports, node) { - if (port->host_deviceid < 0) { + if (port->host_deviceid < 0 && port->nscan) { work[n].mport = port; INIT_WORK(&work[n].work, disc_work_handler); queue_work(rio_wq, &work[n].work); n++; } } + mutex_unlock(&rio_mport_list_lock); flush_workqueue(rio_wq); pr_debug("RIO: destroy discovery workqueue\n"); @@ -1342,8 +1548,6 @@ no_disc: return 0; } -device_initcall_sync(rio_init_mports); - static int hdids[RIO_MAX_MPORTS + 1]; static int rio_get_hdid(int index) @@ -1371,7 +1575,10 @@ int rio_register_mport(struct rio_mport *port) port->id = next_portid++; port->host_deviceid = rio_get_hdid(port->id); + port->nscan = NULL; + mutex_lock(&rio_mport_list_lock); list_add_tail(&port->node, &rio_mports); + mutex_unlock(&rio_mport_list_lock); return 0; } @@ -1386,3 +1593,4 @@ EXPORT_SYMBOL_GPL(rio_request_inb_mbox); EXPORT_SYMBOL_GPL(rio_release_inb_mbox); EXPORT_SYMBOL_GPL(rio_request_outb_mbox); EXPORT_SYMBOL_GPL(rio_release_outb_mbox); +EXPORT_SYMBOL_GPL(rio_init_mports); diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h index b1af414..0afdf48 100644 --- a/drivers/rapidio/rio.h +++ b/drivers/rapidio/rio.h @@ -15,6 +15,7 @@ #include #define RIO_MAX_CHK_RETRY 3 +#define RIO_MPORT_ANY (-1) /* Functions internal to the RIO core code */ @@ -27,8 +28,6 @@ extern u32 rio_mport_get_efb(struct rio_mport *port, int local, u16 destid, extern int rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid, u8 hopcount); extern int rio_create_sysfs_dev_files(struct rio_dev *rdev); -extern int rio_enum_mport(struct rio_mport *mport); -extern int rio_disc_mport(struct rio_mport *mport); extern int rio_std_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount, u16 table, u16 route_destid, u8 route_port); @@ -39,10 +38,16 @@ extern int rio_std_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount, u16 table); extern int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock); extern struct rio_dev *rio_get_comptag(u32 comp_tag, struct rio_dev *from); +extern int rio_add_device(struct rio_dev *rdev); +extern void rio_switch_init(struct rio_dev *rdev, int do_enum); +extern int rio_enable_rx_tx_port(struct rio_mport *port, int local, u16 destid, + u8 hopcount, u8 port_num); +extern int rio_register_scan(int mport_id, struct rio_scan *scan_ops); +extern int rio_unregister_scan(int mport_id); +extern void rio_attach_device(struct rio_dev *rdev); /* Structures internal to the RIO core code */ extern struct device_attribute rio_dev_attrs[]; -extern spinlock_t rio_global_list_lock; extern struct rio_switch_ops __start_rio_switch_ops[]; extern struct rio_switch_ops __end_rio_switch_ops[]; diff --git a/include/linux/rio.h b/include/linux/rio.h index a3e7842..cd3796e 100644 --- a/include/linux/rio.h +++ b/include/linux/rio.h @@ -83,7 +83,6 @@ extern struct bus_type rio_bus_type; extern struct device rio_bus; -extern struct list_head rio_devices; /* list of all devices */ struct rio_mport; struct rio_dev; @@ -237,6 +236,7 @@ enum rio_phy_type { * @name: Port name string * @priv: Master port private data * @dma: DMA device associated with mport + * @nscan: RapidIO network enumeration/discovery operations */ struct rio_mport { struct list_head dbells; /* list of doorbell events */ @@ -262,6 +262,7 @@ struct rio_mport { #ifdef CONFIG_RAPIDIO_DMA_ENGINE struct dma_device dma; #endif + struct rio_scan *nscan; }; struct rio_id_table { @@ -460,6 +461,16 @@ static inline struct rio_mport *dma_to_mport(struct dma_device *ddev) } #endif /* CONFIG_RAPIDIO_DMA_ENGINE */ +/** + * struct rio_scan - RIO enumeration and discovery operations + * @enumerate: Callback to perform RapidIO fabric enumeration. + * @discover: Callback to perform RapidIO fabric discovery. + */ +struct rio_scan { + int (*enumerate)(struct rio_mport *mport); + int (*discover)(struct rio_mport *mport); +}; + /* Architecture and hardware-specific functions */ extern int rio_register_mport(struct rio_mport *); extern int rio_open_inb_mbox(struct rio_mport *, void *, int, int); diff --git a/include/linux/rio_drv.h b/include/linux/rio_drv.h index b75c059..5059994 100644 --- a/include/linux/rio_drv.h +++ b/include/linux/rio_drv.h @@ -433,5 +433,6 @@ extern u16 rio_local_get_device_id(struct rio_mport *port); extern struct rio_dev *rio_get_device(u16 vid, u16 did, struct rio_dev *from); extern struct rio_dev *rio_get_asm(u16 vid, u16 did, u16 asm_vid, u16 asm_did, struct rio_dev *from); +extern int rio_init_mports(void); #endif /* LINUX_RIO_DRV_H */ -- cgit v0.10.2 From bc8fcfea18249640f2728c46d70999dcb7e4dc49 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Fri, 24 May 2013 15:55:06 -0700 Subject: rapidio: add enumeration/discovery start from user space Add RapidIO enumeration/discovery start from user space. User space start allows to defer RapidIO fabric scan until the moment when all participating endpoints are initialized avoiding mandatory synchronized start of all endpoints (which may be challenging in systems with large number of RapidIO endpoints). Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Li Yang Cc: Kumar Gala Cc: Andre van Herk Cc: Micha Nelissen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rapidio/rio-driver.c b/drivers/rapidio/rio-driver.c index 55850bb..a0c8755 100644 --- a/drivers/rapidio/rio-driver.c +++ b/drivers/rapidio/rio-driver.c @@ -207,6 +207,7 @@ struct bus_type rio_bus_type = { .name = "rapidio", .match = rio_match_bus, .dev_attrs = rio_dev_attrs, + .bus_attrs = rio_bus_attrs, .probe = rio_device_probe, .remove = rio_device_remove, }; diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c index 7bdc674..4c15dbf 100644 --- a/drivers/rapidio/rio-scan.c +++ b/drivers/rapidio/rio-scan.c @@ -1134,19 +1134,30 @@ static void rio_pw_enable(struct rio_mport *port, int enable) /** * rio_enum_mport- Start enumeration through a master port * @mport: Master port to send transactions + * @flags: Enumeration control flags * * Starts the enumeration process. If somebody has enumerated our * master port device, then give up. If not and we have an active * link, then start recursive peer enumeration. Returns %0 if * enumeration succeeds or %-EBUSY if enumeration fails. */ -int rio_enum_mport(struct rio_mport *mport) +int rio_enum_mport(struct rio_mport *mport, u32 flags) { struct rio_net *net = NULL; int rc = 0; printk(KERN_INFO "RIO: enumerate master port %d, %s\n", mport->id, mport->name); + + /* + * To avoid multiple start requests (repeat enumeration is not supported + * by this method) check if enumeration/discovery was performed for this + * mport: if mport was added into the list of mports for a net exit + * with error. + */ + if (mport->nnode.next || mport->nnode.prev) + return -EBUSY; + /* If somebody else enumerated our master port device, bail. */ if (rio_enum_host(mport) < 0) { printk(KERN_INFO @@ -1236,14 +1247,16 @@ static void rio_build_route_tables(struct rio_net *net) /** * rio_disc_mport- Start discovery through a master port * @mport: Master port to send transactions + * @flags: discovery control flags * * Starts the discovery process. If we have an active link, - * then wait for the signal that enumeration is complete. + * then wait for the signal that enumeration is complete (if wait + * is allowed). * When enumeration completion is signaled, start recursive * peer discovery. Returns %0 if discovery succeeds or %-EBUSY * on failure. */ -int rio_disc_mport(struct rio_mport *mport) +int rio_disc_mport(struct rio_mport *mport, u32 flags) { struct rio_net *net = NULL; unsigned long to_end; @@ -1253,6 +1266,11 @@ int rio_disc_mport(struct rio_mport *mport) /* If master port has an active link, allocate net and discover peers */ if (rio_mport_is_active(mport)) { + if (rio_enum_complete(mport)) + goto enum_done; + else if (flags & RIO_SCAN_ENUM_NO_WAIT) + return -EAGAIN; + pr_debug("RIO: wait for enumeration to complete...\n"); to_end = jiffies + CONFIG_RAPIDIO_DISC_TIMEOUT * HZ; diff --git a/drivers/rapidio/rio-sysfs.c b/drivers/rapidio/rio-sysfs.c index 4dbe360..66d4acd 100644 --- a/drivers/rapidio/rio-sysfs.c +++ b/drivers/rapidio/rio-sysfs.c @@ -285,3 +285,48 @@ void rio_remove_sysfs_dev_files(struct rio_dev *rdev) rdev->rswitch->sw_sysfs(rdev, RIO_SW_SYSFS_REMOVE); } } + +static ssize_t bus_scan_store(struct bus_type *bus, const char *buf, + size_t count) +{ + long val; + struct rio_mport *port = NULL; + int rc; + + if (kstrtol(buf, 0, &val) < 0) + return -EINVAL; + + if (val == RIO_MPORT_ANY) { + rc = rio_init_mports(); + goto exit; + } + + if (val < 0 || val >= RIO_MAX_MPORTS) + return -EINVAL; + + port = rio_find_mport((int)val); + + if (!port) { + pr_debug("RIO: %s: mport_%d not available\n", + __func__, (int)val); + return -EINVAL; + } + + if (!port->nscan) + return -EINVAL; + + if (port->host_deviceid >= 0) + rc = port->nscan->enumerate(port, 0); + else + rc = port->nscan->discover(port, RIO_SCAN_ENUM_NO_WAIT); +exit: + if (!rc) + rc = count; + + return rc; +} + +struct bus_attribute rio_bus_attrs[] = { + __ATTR(scan, (S_IWUSR|S_IWGRP), NULL, bus_scan_store), + __ATTR_NULL +}; diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c index 6e75dda..cb1c089 100644 --- a/drivers/rapidio/rio.c +++ b/drivers/rapidio/rio.c @@ -1383,6 +1383,30 @@ EXPORT_SYMBOL_GPL(rio_dma_prep_slave_sg); #endif /* CONFIG_RAPIDIO_DMA_ENGINE */ /** + * rio_find_mport - find RIO mport by its ID + * @mport_id: number (ID) of mport device + * + * Given a RIO mport number, the desired mport is located + * in the global list of mports. If the mport is found, a pointer to its + * data structure is returned. If no mport is found, %NULL is returned. + */ +struct rio_mport *rio_find_mport(int mport_id) +{ + struct rio_mport *port; + + mutex_lock(&rio_mport_list_lock); + list_for_each_entry(port, &rio_mports, node) { + if (port->id == mport_id) + goto found; + } + port = NULL; +found: + mutex_unlock(&rio_mport_list_lock); + + return port; +} + +/** * rio_register_scan - enumeration/discovery method registration interface * @mport_id: mport device ID for which fabric scan routine has to be set * (RIO_MPORT_ANY = set for all available mports) @@ -1475,7 +1499,7 @@ static void disc_work_handler(struct work_struct *_work) work = container_of(_work, struct rio_disc_work, work); pr_debug("RIO: discovery work for mport %d %s\n", work->mport->id, work->mport->name); - work->mport->nscan->discover(work->mport); + work->mport->nscan->discover(work->mport, 0); } int rio_init_mports(void) @@ -1495,7 +1519,7 @@ int rio_init_mports(void) list_for_each_entry(port, &rio_mports, node) { if (port->host_deviceid >= 0) { if (port->nscan) - port->nscan->enumerate(port); + port->nscan->enumerate(port, 0); } else n++; } diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h index 0afdf48..c14f864 100644 --- a/drivers/rapidio/rio.h +++ b/drivers/rapidio/rio.h @@ -45,9 +45,11 @@ extern int rio_enable_rx_tx_port(struct rio_mport *port, int local, u16 destid, extern int rio_register_scan(int mport_id, struct rio_scan *scan_ops); extern int rio_unregister_scan(int mport_id); extern void rio_attach_device(struct rio_dev *rdev); +extern struct rio_mport *rio_find_mport(int mport_id); /* Structures internal to the RIO core code */ extern struct device_attribute rio_dev_attrs[]; +extern struct bus_attribute rio_bus_attrs[]; extern struct rio_switch_ops __start_rio_switch_ops[]; extern struct rio_switch_ops __end_rio_switch_ops[]; diff --git a/include/linux/rio.h b/include/linux/rio.h index cd3796e..18e0993 100644 --- a/include/linux/rio.h +++ b/include/linux/rio.h @@ -265,6 +265,11 @@ struct rio_mport { struct rio_scan *nscan; }; +/* + * Enumeration/discovery control flags + */ +#define RIO_SCAN_ENUM_NO_WAIT 0x00000001 /* Do not wait for enum completed */ + struct rio_id_table { u16 start; /* logical minimal id */ u32 max; /* max number of IDs in table */ @@ -467,8 +472,8 @@ static inline struct rio_mport *dma_to_mport(struct dma_device *ddev) * @discover: Callback to perform RapidIO fabric discovery. */ struct rio_scan { - int (*enumerate)(struct rio_mport *mport); - int (*discover)(struct rio_mport *mport); + int (*enumerate)(struct rio_mport *mport, u32 flags); + int (*discover)(struct rio_mport *mport, u32 flags); }; /* Architecture and hardware-specific functions */ -- cgit v0.10.2 From 5eeb929390de7d5219483a1ca10cce4a84066099 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Fri, 24 May 2013 15:55:07 -0700 Subject: rapidio: documentation update for enumeration changes Update RapidIO documentation to reflect changes made to enumeration/discovery build configuration and user space triggering mechanism. Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Li Yang Cc: Kumar Gala Cc: Andre van Herk Cc: Micha Nelissen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/rapidio/rapidio.txt b/Documentation/rapidio/rapidio.txt index c75694b..a9c16c9 100644 --- a/Documentation/rapidio/rapidio.txt +++ b/Documentation/rapidio/rapidio.txt @@ -79,20 +79,63 @@ master port that is used to communicate with devices within the network. In order to initialize the RapidIO subsystem, a platform must initialize and register at least one master port within the RapidIO network. To register mport within the subsystem controller driver initialization code calls function -rio_register_mport() for each available master port. After all active master -ports are registered with a RapidIO subsystem, the rio_init_mports() routine -is called to perform enumeration and discovery. +rio_register_mport() for each available master port. -In the current PowerPC-based implementation a subsys_initcall() is specified to -perform controller initialization and mport registration. At the end it directly -calls rio_init_mports() to execute RapidIO enumeration and discovery. +RapidIO subsystem uses subsys_initcall() or device_initcall() to perform +controller initialization (depending on controller device type). + +After all active master ports are registered with a RapidIO subsystem, +an enumeration and/or discovery routine may be called automatically or +by user-space command. 4. Enumeration and Discovery ---------------------------- -When rio_init_mports() is called it scans a list of registered master ports and -calls an enumeration or discovery routine depending on the configured role of a -master port: host or agent. +4.1 Overview +------------ + +RapidIO subsystem configuration options allow users to specify enumeration and +discovery methods as statically linked components or loadable modules. +An enumeration/discovery method implementation and available input parameters +define how any given method can be attached to available RapidIO mports: +simply to all available mports OR individually to the specified mport device. + +Depending on selected enumeration/discovery build configuration, there are +several methods to initiate an enumeration and/or discovery process: + + (a) Statically linked enumeration and discovery process can be started + automatically during kernel initialization time using corresponding module + parameters. This was the original method used since introduction of RapidIO + subsystem. Now this method relies on enumerator module parameter which is + 'rio-scan.scan' for existing basic enumeration/discovery method. + When automatic start of enumeration/discovery is used a user has to ensure + that all discovering endpoints are started before the enumerating endpoint + and are waiting for enumeration to be completed. + Configuration option CONFIG_RAPIDIO_DISC_TIMEOUT defines time that discovering + endpoint waits for enumeration to be completed. If the specified timeout + expires the discovery process is terminated without obtaining RapidIO network + information. NOTE: a timed out discovery process may be restarted later using + a user-space command as it is described later if the given endpoint was + enumerated successfully. + + (b) Statically linked enumeration and discovery process can be started by + a command from user space. This initiation method provides more flexibility + for a system startup compared to the option (a) above. After all participating + endpoints have been successfully booted, an enumeration process shall be + started first by issuing a user-space command, after an enumeration is + completed a discovery process can be started on all remaining endpoints. + + (c) Modular enumeration and discovery process can be started by a command from + user space. After an enumeration/discovery module is loaded, a network scan + process can be started by issuing a user-space command. + Similar to the option (b) above, an enumerator has to be started first. + + (d) Modular enumeration and discovery process can be started by a module + initialization routine. In this case an enumerating module shall be loaded + first. + +When a network scan process is started it calls an enumeration or discovery +routine depending on the configured role of a master port: host or agent. Enumeration is performed by a master port if it is configured as a host port by assigning a host device ID greater than or equal to zero. A host device ID is @@ -104,8 +147,58 @@ for it. The enumeration and discovery routines use RapidIO maintenance transactions to access the configuration space of devices. -The enumeration process is implemented according to the enumeration algorithm -outlined in the RapidIO Interconnect Specification: Annex I [1]. +4.2 Automatic Start of Enumeration and Discovery +------------------------------------------------ + +Automatic enumeration/discovery start method is applicable only to built-in +enumeration/discovery RapidIO configuration selection. To enable automatic +enumeration/discovery start by existing basic enumerator method set use boot +command line parameter "rio-scan.scan=1". + +This configuration requires synchronized start of all RapidIO endpoints that +form a network which will be enumerated/discovered. Discovering endpoints have +to be started before an enumeration starts to ensure that all RapidIO +controllers have been initialized and are ready to be discovered. Configuration +parameter CONFIG_RAPIDIO_DISC_TIMEOUT defines time (in seconds) which +a discovering endpoint will wait for enumeration to be completed. + +When automatic enumeration/discovery start is selected, basic method's +initialization routine calls rio_init_mports() to perform enumeration or +discovery for all known mport devices. + +Depending on RapidIO network size and configuration this automatic +enumeration/discovery start method may be difficult to use due to the +requirement for synchronized start of all endpoints. + +4.3 User-space Start of Enumeration and Discovery +------------------------------------------------- + +User-space start of enumeration and discovery can be used with built-in and +modular build configurations. For user-space controlled start RapidIO subsystem +creates the sysfs write-only attribute file '/sys/bus/rapidio/scan'. To initiate +an enumeration or discovery process on specific mport device, a user needs to +write mport_ID (not RapidIO destination ID) into that file. The mport_ID is a +sequential number (0 ... RIO_MAX_MPORTS) assigned during mport device +registration. For example for machine with single RapidIO controller, mport_ID +for that controller always will be 0. + +To initiate RapidIO enumeration/discovery on all available mports a user may +write '-1' (or RIO_MPORT_ANY) into the scan attribute file. + +4.4 Basic Enumeration Method +---------------------------- + +This is an original enumeration/discovery method which is available since +first release of RapidIO subsystem code. The enumeration process is +implemented according to the enumeration algorithm outlined in the RapidIO +Interconnect Specification: Annex I [1]. + +This method can be configured as statically linked or loadable module. +The method's single parameter "scan" allows to trigger the enumeration/discovery +process from module initialization routine. + +This enumeration/discovery method can be started only once and does not support +unloading if it is built as a module. The enumeration process traverses the network using a recursive depth-first algorithm. When a new device is found, the enumerator takes ownership of that @@ -160,6 +253,19 @@ time period. If this wait time period expires before enumeration is completed, an agent skips RapidIO discovery and continues with remaining kernel initialization. +4.5 Adding New Enumeration/Discovery Method +------------------------------------------- + +RapidIO subsystem code organization allows addition of new enumeration/discovery +methods as new configuration options without significant impact to to the core +RapidIO code. + +A new enumeration/discovery method has to be attached to one or more mport +devices before an enumeration/discovery process can be started. Normally, +method's module initialization routine calls rio_register_scan() to attach +an enumerator to a specified mport device (or devices). The basic enumerator +implementation demonstrates this process. + 5. References ------------- diff --git a/Documentation/rapidio/sysfs.txt b/Documentation/rapidio/sysfs.txt index 97f71ce..1987817 100644 --- a/Documentation/rapidio/sysfs.txt +++ b/Documentation/rapidio/sysfs.txt @@ -88,3 +88,20 @@ that exports additional attributes. IDT_GEN2: errlog - reads contents of device error log until it is empty. + + +5. RapidIO Bus Attributes +------------------------- + +RapidIO bus subdirectory /sys/bus/rapidio implements the following bus-specific +attribute: + + scan - allows to trigger enumeration discovery process from user space. This + is a write-only attribute. To initiate an enumeration or discovery + process on specific mport device, a user needs to write mport_ID (not + RapidIO destination ID) into this file. The mport_ID is a sequential + number (0 ... RIO_MAX_MPORTS) assigned to the mport device. + For example, for a machine with a single RapidIO controller, mport_ID + for that controller always will be 0. + To initiate RapidIO enumeration/discovery on all available mports + a user must write '-1' (or RIO_MPORT_ANY) into this attribute file. -- cgit v0.10.2 From 7b92d03c3239f43e5b86c9cc9630f026d36ee995 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Fri, 24 May 2013 15:55:08 -0700 Subject: fat: fix possible overflow for fat_clusters Intermediate value of fat_clusters can be overflowed on 32bits arch. Reported-by: Krzysztof Strasburger Signed-off-by: OGAWA Hirofumi Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/fat/inode.c b/fs/fat/inode.c index dfce656..5d4513c 100644 --- a/fs/fat/inode.c +++ b/fs/fat/inode.c @@ -1229,6 +1229,19 @@ static int fat_read_root(struct inode *inode) return 0; } +static unsigned long calc_fat_clusters(struct super_block *sb) +{ + struct msdos_sb_info *sbi = MSDOS_SB(sb); + + /* Divide first to avoid overflow */ + if (sbi->fat_bits != 12) { + unsigned long ent_per_sec = sb->s_blocksize * 8 / sbi->fat_bits; + return ent_per_sec * sbi->fat_length; + } + + return sbi->fat_length * sb->s_blocksize * 8 / sbi->fat_bits; +} + /* * Read the super block of an MS-DOS FS. */ @@ -1434,7 +1447,7 @@ int fat_fill_super(struct super_block *sb, void *data, int silent, int isvfat, sbi->dirty = b->fat16.state & FAT_STATE_DIRTY; /* check that FAT table does not overflow */ - fat_clusters = sbi->fat_length * sb->s_blocksize * 8 / sbi->fat_bits; + fat_clusters = calc_fat_clusters(sb); total_clusters = min(total_clusters, fat_clusters - FAT_START_ENT); if (total_clusters > MAX_FAT(sb)) { if (!silent) -- cgit v0.10.2 From 4c663cfc523a88d97a8309b04a089c27dc57fd7e Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Fri, 24 May 2013 15:55:09 -0700 Subject: wait: fix false timeouts when using wait_event_timeout() Many callers of the wait_event_timeout() and wait_event_interruptible_timeout() expect that the return value will be positive if the specified condition becomes true before the timeout elapses. However, at the moment this isn't guaranteed. If the wake-up handler is delayed enough, the time remaining until timeout will be calculated as 0 - and passed back as a return value - even if the condition became true before the timeout has passed. Fix this by returning at least 1 if the condition becomes true. This semantic is in line with what wait_for_condition_timeout() does; see commit bb10ed09 ("sched: fix wait_for_completion_timeout() spurious failure under heavy load"). Daniel said "We have 3 instances of this bug in drm/i915. One case even where we switch between the interruptible and not interruptible wait_event_timeout variants, foolishly presuming they have the same semantics. I very much like this." One such bug is reported at https://bugs.freedesktop.org/show_bug.cgi?id=64133 Signed-off-by: Imre Deak Acked-by: Daniel Vetter Acked-by: David Howells Acked-by: Jens Axboe Cc: "Paul E. McKenney" Cc: Dave Jones Cc: Lukas Czerner Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/wait.h b/include/linux/wait.h index ac38be2..1133695 100644 --- a/include/linux/wait.h +++ b/include/linux/wait.h @@ -217,6 +217,8 @@ do { \ if (!ret) \ break; \ } \ + if (!ret && (condition)) \ + ret = 1; \ finish_wait(&wq, &__wait); \ } while (0) @@ -233,8 +235,9 @@ do { \ * wake_up() has to be called after changing any variable that could * change the result of the wait condition. * - * The function returns 0 if the @timeout elapsed, and the remaining - * jiffies if the condition evaluated to true before the timeout elapsed. + * The function returns 0 if the @timeout elapsed, or the remaining + * jiffies (at least 1) if the @condition evaluated to %true before + * the @timeout elapsed. */ #define wait_event_timeout(wq, condition, timeout) \ ({ \ @@ -302,6 +305,8 @@ do { \ ret = -ERESTARTSYS; \ break; \ } \ + if (!ret && (condition)) \ + ret = 1; \ finish_wait(&wq, &__wait); \ } while (0) @@ -318,9 +323,10 @@ do { \ * wake_up() has to be called after changing any variable that could * change the result of the wait condition. * - * The function returns 0 if the @timeout elapsed, -ERESTARTSYS if it - * was interrupted by a signal, and the remaining jiffies otherwise - * if the condition evaluated to true before the timeout elapsed. + * Returns: + * 0 if the @timeout elapsed, -%ERESTARTSYS if it was interrupted by + * a signal, or the remaining jiffies (at least 1) if the @condition + * evaluated to %true before the @timeout elapsed. */ #define wait_event_interruptible_timeout(wq, condition, timeout) \ ({ \ -- cgit v0.10.2 From d34883d4e35c0a994e91dd847a82b4c9e0c31d83 Mon Sep 17 00:00:00 2001 From: Xiao Guangrong Date: Fri, 24 May 2013 15:55:11 -0700 Subject: mm: mmu_notifier: re-fix freed page still mapped in secondary MMU Commit 751efd8610d3 ("mmu_notifier_unregister NULL Pointer deref and multiple ->release()") breaks the fix 3ad3d901bbcf ("mm: mmu_notifier: fix freed page still mapped in secondary MMU"). Since hlist_for_each_entry_rcu() is changed now, we can not revert that patch directly, so this patch reverts the commit and simply fix the bug spotted by that patch This bug spotted by commit 751efd8610d3 is: There is a race condition between mmu_notifier_unregister() and __mmu_notifier_release(). Assume two tasks, one calling mmu_notifier_unregister() as a result of a filp_close() ->flush() callout (task A), and the other calling mmu_notifier_release() from an mmput() (task B). A B t1 srcu_read_lock() t2 if (!hlist_unhashed()) t3 srcu_read_unlock() t4 srcu_read_lock() t5 hlist_del_init_rcu() t6 synchronize_srcu() t7 srcu_read_unlock() t8 hlist_del_rcu() <--- NULL pointer deref. This can be fixed by using hlist_del_init_rcu instead of hlist_del_rcu. The another issue spotted in the commit is "multiple ->release() callouts", we needn't care it too much because it is really rare (e.g, can not happen on kvm since mmu-notify is unregistered after exit_mmap()) and the later call of multiple ->release should be fast since all the pages have already been released by the first call. Anyway, this issue should be fixed in a separate patch. -stable suggestions: Any version that has commit 751efd8610d3 need to be backported. I find the oldest version has this commit is 3.0-stable. [akpm@linux-foundation.org: tweak comments] Signed-off-by: Xiao Guangrong Tested-by: Robin Holt Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/mmu_notifier.c b/mm/mmu_notifier.c index be04122..6725ff1 100644 --- a/mm/mmu_notifier.c +++ b/mm/mmu_notifier.c @@ -40,48 +40,44 @@ void __mmu_notifier_release(struct mm_struct *mm) int id; /* - * srcu_read_lock() here will block synchronize_srcu() in - * mmu_notifier_unregister() until all registered - * ->release() callouts this function makes have - * returned. + * SRCU here will block mmu_notifier_unregister until + * ->release returns. */ id = srcu_read_lock(&srcu); + hlist_for_each_entry_rcu(mn, &mm->mmu_notifier_mm->list, hlist) + /* + * If ->release runs before mmu_notifier_unregister it must be + * handled, as it's the only way for the driver to flush all + * existing sptes and stop the driver from establishing any more + * sptes before all the pages in the mm are freed. + */ + if (mn->ops->release) + mn->ops->release(mn, mm); + srcu_read_unlock(&srcu, id); + spin_lock(&mm->mmu_notifier_mm->lock); while (unlikely(!hlist_empty(&mm->mmu_notifier_mm->list))) { mn = hlist_entry(mm->mmu_notifier_mm->list.first, struct mmu_notifier, hlist); - /* - * Unlink. This will prevent mmu_notifier_unregister() - * from also making the ->release() callout. + * We arrived before mmu_notifier_unregister so + * mmu_notifier_unregister will do nothing other than to wait + * for ->release to finish and for mmu_notifier_unregister to + * return. */ hlist_del_init_rcu(&mn->hlist); - spin_unlock(&mm->mmu_notifier_mm->lock); - - /* - * Clear sptes. (see 'release' description in mmu_notifier.h) - */ - if (mn->ops->release) - mn->ops->release(mn, mm); - - spin_lock(&mm->mmu_notifier_mm->lock); } spin_unlock(&mm->mmu_notifier_mm->lock); /* - * All callouts to ->release() which we have done are complete. - * Allow synchronize_srcu() in mmu_notifier_unregister() to complete - */ - srcu_read_unlock(&srcu, id); - - /* - * mmu_notifier_unregister() may have unlinked a notifier and may - * still be calling out to it. Additionally, other notifiers - * may have been active via vmtruncate() et. al. Block here - * to ensure that all notifier callouts for this mm have been - * completed and the sptes are really cleaned up before returning - * to exit_mmap(). + * synchronize_srcu here prevents mmu_notifier_release from returning to + * exit_mmap (which would proceed with freeing all pages in the mm) + * until the ->release method returns, if it was invoked by + * mmu_notifier_unregister. + * + * The mmu_notifier_mm can't go away from under us because one mm_count + * is held by exit_mmap. */ synchronize_srcu(&srcu); } @@ -292,31 +288,34 @@ void mmu_notifier_unregister(struct mmu_notifier *mn, struct mm_struct *mm) { BUG_ON(atomic_read(&mm->mm_count) <= 0); - spin_lock(&mm->mmu_notifier_mm->lock); if (!hlist_unhashed(&mn->hlist)) { + /* + * SRCU here will force exit_mmap to wait for ->release to + * finish before freeing the pages. + */ int id; + id = srcu_read_lock(&srcu); /* - * Ensure we synchronize up with __mmu_notifier_release(). + * exit_mmap will block in mmu_notifier_release to guarantee + * that ->release is called before freeing the pages. */ - id = srcu_read_lock(&srcu); - - hlist_del_rcu(&mn->hlist); - spin_unlock(&mm->mmu_notifier_mm->lock); - if (mn->ops->release) mn->ops->release(mn, mm); + srcu_read_unlock(&srcu, id); + spin_lock(&mm->mmu_notifier_mm->lock); /* - * Allow __mmu_notifier_release() to complete. + * Can not use list_del_rcu() since __mmu_notifier_release + * can delete it before we hold the lock. */ - srcu_read_unlock(&srcu, id); - } else + hlist_del_init_rcu(&mn->hlist); spin_unlock(&mm->mmu_notifier_mm->lock); + } /* - * Wait for any running method to finish, including ->release() if it - * was run by __mmu_notifier_release() instead of us. + * Wait for any running method to finish, of course including + * ->release if it was run by mmu_notifier_relase instead of us. */ synchronize_srcu(&srcu); -- cgit v0.10.2 From afe1bb73f8ed588ab6268c27c5a447fe0484e48f Mon Sep 17 00:00:00 2001 From: Joseph Qi Date: Fri, 24 May 2013 15:55:12 -0700 Subject: ocfs2: unlock rw lock if inode lock failed In ocfs2_file_aio_write(), it does ocfs2_rw_lock() first and then ocfs2_inode_lock(). But if ocfs2_inode_lock() failed, it goes to out_sems without unlocking rw lock. This will cause a bug in ocfs2_lock_res_free() when testing res->l_ex_holders, which is increased in __ocfs2_cluster_lock() and decreased in __ocfs2_cluster_unlock(). Signed-off-by: Joseph Qi Cc: Joel Becker Cc: Mark Fasheh Cc: Li Zefan Cc: "Duyongfeng (B)" Acked-by: Sunil Mushran Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 8a7509f..ff54014 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -2288,7 +2288,7 @@ relock: ret = ocfs2_inode_lock(inode, NULL, 1); if (ret < 0) { mlog_errno(ret); - goto out_sems; + goto out; } ocfs2_inode_unlock(inode, 1); -- cgit v0.10.2 From 26549c8d36a64d9130e4c0f32412be7ba6180923 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 24 May 2013 15:55:13 -0700 Subject: drivers/video: implement a simple framebuffer driver A simple frame-buffer describes a raw memory region that may be rendered to, with the assumption that the display hardware has already been set up to scan out from that buffer. This is useful in cases where a bootloader exists and has set up the display hardware, but a Linux driver doesn't yet exist for the display hardware. Examples use-cases include: * The built-in LCD panels on the Samsung ARM chromebook, and Tegra devices, and likely many other ARM or embedded systems. These cannot yet be supported using a full graphics driver, since the panel control should be provided by the CDF (Common Display Framework), which has been stuck in design/review for quite some time. One could support these panels using custom SoC-specific code, but there is a desire to use common infra-structure rather than having each SoC vendor invent their own code, hence the desire to wait for CDF. * Hardware for which a full graphics driver is not yet available, and the path to obtain one upstream isn't yet clear. For example, the Raspberry Pi. * Any hardware in early stages of upstreaming, before a full graphics driver has been tackled. This driver can provide a graphical boot console (even full X support) much earlier in the upstreaming process, thus making new SoC or board support more generally useful earlier. [akpm@linux-foundation.org: make simplefb_formats[] static] Signed-off-by: Stephen Warren Cc: Arnd Bergmann Acked-by: Olof Johansson Cc: Rob Clark Cc: Florian Tobias Schandinat Cc: Tomasz Figa Cc: Laurent Pinchart Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/devicetree/bindings/video/simple-framebuffer.txt b/Documentation/devicetree/bindings/video/simple-framebuffer.txt new file mode 100644 index 0000000..3ea4605 --- /dev/null +++ b/Documentation/devicetree/bindings/video/simple-framebuffer.txt @@ -0,0 +1,25 @@ +Simple Framebuffer + +A simple frame-buffer describes a raw memory region that may be rendered to, +with the assumption that the display hardware has already been set up to scan +out from that buffer. + +Required properties: +- compatible: "simple-framebuffer" +- reg: Should contain the location and size of the framebuffer memory. +- width: The width of the framebuffer in pixels. +- height: The height of the framebuffer in pixels. +- stride: The number of bytes in each line of the framebuffer. +- format: The format of the framebuffer surface. Valid values are: + - r5g6b5 (16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b). + +Example: + + framebuffer { + compatible = "simple-framebuffer"; + reg = <0x1d385000 (1600 * 1200 * 2)>; + width = <1600>; + height = <1200>; + stride = <(1600 * 2)>; + format = "r5g6b5"; + }; diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index d71d60f..6246056 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -2453,6 +2453,23 @@ config FB_HYPERV help This framebuffer driver supports Microsoft Hyper-V Synthetic Video. +config FB_SIMPLE + bool "Simple framebuffer support" + depends on (FB = y) && OF + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + Say Y if you want support for a simple frame-buffer. + + This driver assumes that the display hardware has been initialized + before the kernel boots, and the kernel will simply render to the + pre-allocated frame buffer surface. + + Configuration re: surface address, size, and format must be provided + through device tree, or potentially plain old platform data in the + future. + source "drivers/video/omap/Kconfig" source "drivers/video/omap2/Kconfig" source "drivers/video/exynos/Kconfig" diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 7234e4a..e8bae8d 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -166,6 +166,7 @@ obj-$(CONFIG_FB_MX3) += mx3fb.o obj-$(CONFIG_FB_DA8XX) += da8xx-fb.o obj-$(CONFIG_FB_MXS) += mxsfb.o obj-$(CONFIG_FB_SSD1307) += ssd1307fb.o +obj-$(CONFIG_FB_SIMPLE) += simplefb.o # the test framebuffer is last obj-$(CONFIG_FB_VIRTUAL) += vfb.o diff --git a/drivers/video/simplefb.c b/drivers/video/simplefb.c new file mode 100644 index 0000000..e2e9e3e --- /dev/null +++ b/drivers/video/simplefb.c @@ -0,0 +1,234 @@ +/* + * Simplest possible simple frame-buffer driver, as a platform device + * + * Copyright (c) 2013, Stephen Warren + * + * Based on q40fb.c, which was: + * Copyright (C) 2001 Richard Zidlicky + * + * Also based on offb.c, which was: + * Copyright (C) 1997 Geert Uytterhoeven + * Copyright (C) 1996 Paul Mackerras + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include +#include +#include +#include +#include + +static struct fb_fix_screeninfo simplefb_fix = { + .id = "simple", + .type = FB_TYPE_PACKED_PIXELS, + .visual = FB_VISUAL_TRUECOLOR, + .accel = FB_ACCEL_NONE, +}; + +static struct fb_var_screeninfo simplefb_var = { + .height = -1, + .width = -1, + .activate = FB_ACTIVATE_NOW, + .vmode = FB_VMODE_NONINTERLACED, +}; + +static int simplefb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, + u_int transp, struct fb_info *info) +{ + u32 *pal = info->pseudo_palette; + u32 cr = red >> (16 - info->var.red.length); + u32 cg = green >> (16 - info->var.green.length); + u32 cb = blue >> (16 - info->var.blue.length); + u32 value; + + if (regno >= 16) + return -EINVAL; + + value = (cr << info->var.red.offset) | + (cg << info->var.green.offset) | + (cb << info->var.blue.offset); + if (info->var.transp.length > 0) { + u32 mask = (1 << info->var.transp.length) - 1; + mask <<= info->var.transp.offset; + value |= mask; + } + pal[regno] = value; + + return 0; +} + +static struct fb_ops simplefb_ops = { + .owner = THIS_MODULE, + .fb_setcolreg = simplefb_setcolreg, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, +}; + +struct simplefb_format { + const char *name; + u32 bits_per_pixel; + struct fb_bitfield red; + struct fb_bitfield green; + struct fb_bitfield blue; + struct fb_bitfield transp; +}; + +static struct simplefb_format simplefb_formats[] = { + { "r5g6b5", 16, {11, 5}, {5, 6}, {0, 5}, {0, 0} }, +}; + +struct simplefb_params { + u32 width; + u32 height; + u32 stride; + struct simplefb_format *format; +}; + +static int simplefb_parse_dt(struct platform_device *pdev, + struct simplefb_params *params) +{ + struct device_node *np = pdev->dev.of_node; + int ret; + const char *format; + int i; + + ret = of_property_read_u32(np, "width", ¶ms->width); + if (ret) { + dev_err(&pdev->dev, "Can't parse width property\n"); + return ret; + } + + ret = of_property_read_u32(np, "height", ¶ms->height); + if (ret) { + dev_err(&pdev->dev, "Can't parse height property\n"); + return ret; + } + + ret = of_property_read_u32(np, "stride", ¶ms->stride); + if (ret) { + dev_err(&pdev->dev, "Can't parse stride property\n"); + return ret; + } + + ret = of_property_read_string(np, "format", &format); + if (ret) { + dev_err(&pdev->dev, "Can't parse format property\n"); + return ret; + } + params->format = NULL; + for (i = 0; i < ARRAY_SIZE(simplefb_formats); i++) { + if (strcmp(format, simplefb_formats[i].name)) + continue; + params->format = &simplefb_formats[i]; + break; + } + if (!params->format) { + dev_err(&pdev->dev, "Invalid format value\n"); + return -EINVAL; + } + + return 0; +} + +static int simplefb_probe(struct platform_device *pdev) +{ + int ret; + struct simplefb_params params; + struct fb_info *info; + struct resource *mem; + + if (fb_get_options("simplefb", NULL)) + return -ENODEV; + + ret = simplefb_parse_dt(pdev, ¶ms); + if (ret) + return ret; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) { + dev_err(&pdev->dev, "No memory resource\n"); + return -EINVAL; + } + + info = framebuffer_alloc(sizeof(u32) * 16, &pdev->dev); + if (!info) + return -ENOMEM; + platform_set_drvdata(pdev, info); + + info->fix = simplefb_fix; + info->fix.smem_start = mem->start; + info->fix.smem_len = resource_size(mem); + info->fix.line_length = params.stride; + + info->var = simplefb_var; + info->var.xres = params.width; + info->var.yres = params.height; + info->var.xres_virtual = params.width; + info->var.yres_virtual = params.height; + info->var.bits_per_pixel = params.format->bits_per_pixel; + info->var.red = params.format->red; + info->var.green = params.format->green; + info->var.blue = params.format->blue; + info->var.transp = params.format->transp; + + info->fbops = &simplefb_ops; + info->flags = FBINFO_DEFAULT; + info->screen_base = devm_ioremap(&pdev->dev, info->fix.smem_start, + info->fix.smem_len); + if (!info->screen_base) { + framebuffer_release(info); + return -ENODEV; + } + info->pseudo_palette = (void *)(info + 1); + + ret = register_framebuffer(info); + if (ret < 0) { + dev_err(&pdev->dev, "Unable to register simplefb: %d\n", ret); + framebuffer_release(info); + return ret; + } + + dev_info(&pdev->dev, "fb%d: simplefb registered!\n", info->node); + + return 0; +} + +static int simplefb_remove(struct platform_device *pdev) +{ + struct fb_info *info = platform_get_drvdata(pdev); + + unregister_framebuffer(info); + framebuffer_release(info); + + return 0; +} + +static const struct of_device_id simplefb_of_match[] = { + { .compatible = "simple-framebuffer", }, + { }, +}; +MODULE_DEVICE_TABLE(of, simplefb_of_match); + +static struct platform_driver simplefb_driver = { + .driver = { + .name = "simple-framebuffer", + .owner = THIS_MODULE, + .of_match_table = simplefb_of_match, + }, + .probe = simplefb_probe, + .remove = simplefb_remove, +}; +module_platform_driver(simplefb_driver); + +MODULE_AUTHOR("Stephen Warren "); +MODULE_DESCRIPTION("Simple framebuffer driver"); +MODULE_LICENSE("GPL v2"); -- cgit v0.10.2 From 28ccddf7952c496df2a51ce5aee4f2a058a98bab Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Fri, 24 May 2013 15:55:15 -0700 Subject: mm: memcg: remove incorrect VM_BUG_ON for swap cache pages in uncharge Commit 0c59b89c81ea ("mm: memcg: push down PageSwapCache check into uncharge entry functions") added a VM_BUG_ON() on PageSwapCache in the uncharge path after checking that page flag once, assuming that the state is stable in all paths, but this is not the case and the condition triggers in user environments. An uncharge after the last page table reference to the page goes away can race with reclaim adding the page to swap cache. Swap cache pages are usually uncharged when they are freed after swapout, from a path that also handles swap usage accounting and memcg lifetime management. However, since the last page table reference is gone and thus no references to the swap slot left, the swap slot will be freed shortly when reclaim attempts to write the page to disk. The whole swap accounting is not even necessary. So while the race condition for which this VM_BUG_ON was added is real and actually existed all along, there are no negative effects. Remove the VM_BUG_ON again. Reported-by: Heiko Carstens Reported-by: Lingzhu Xiang Signed-off-by: Johannes Weiner Acked-by: Hugh Dickins Acked-by: Michal Hocko Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/memcontrol.c b/mm/memcontrol.c index cb1c9de..010d6c1 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -4108,8 +4108,6 @@ __mem_cgroup_uncharge_common(struct page *page, enum charge_type ctype, if (mem_cgroup_disabled()) return NULL; - VM_BUG_ON(PageSwapCache(page)); - if (PageTransHuge(page)) { nr_pages <<= compound_order(page); VM_BUG_ON(!PageTransHuge(page)); @@ -4205,6 +4203,18 @@ void mem_cgroup_uncharge_page(struct page *page) if (page_mapped(page)) return; VM_BUG_ON(page->mapping && !PageAnon(page)); + /* + * If the page is in swap cache, uncharge should be deferred + * to the swap path, which also properly accounts swap usage + * and handles memcg lifetime. + * + * Note that this check is not stable and reclaim may add the + * page to swap cache at any time after this. However, if the + * page is not in swap cache by the time page->mapcount hits + * 0, there won't be any page table references to the swap + * slot, and reclaim will free it and not actually write the + * page to disk. + */ if (PageSwapCache(page)) return; __mem_cgroup_uncharge_common(page, MEM_CGROUP_CHARGE_TYPE_ANON, false); -- cgit v0.10.2 From fb09c3733a94b5f1dba50359d09c9e217c763fb9 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Fri, 24 May 2013 15:55:16 -0700 Subject: hfs: avoid crash in hfs_bnode_create Commit 634725a92938 ("hfs: cleanup HFS+ prints") removed the BUG_ON in hfs_bnode_create in hfsplus. This patch removes it from the hfs version and avoids an fsfuzzer crash. Signed-off-by: Jeff Mahoney Acked-by: Jeff Mahoney Signed-off-by: Jiri Slaby Cc: Vyacheslav Dubeyko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/hfs/bnode.c b/fs/hfs/bnode.c index f3b1a15..d3fa6bd 100644 --- a/fs/hfs/bnode.c +++ b/fs/hfs/bnode.c @@ -415,7 +415,11 @@ struct hfs_bnode *hfs_bnode_create(struct hfs_btree *tree, u32 num) spin_lock(&tree->hash_lock); node = hfs_bnode_findhash(tree, num); spin_unlock(&tree->hash_lock); - BUG_ON(node); + if (node) { + pr_crit("new node %u already hashed?\n", num); + WARN_ON(1); + return node; + } node = __hfs_bnode_create(tree, num); if (!node) return ERR_PTR(-ENOMEM); -- cgit v0.10.2 From 1ccc819da6fda9bee10ab8b72e9adbb5ad3e4959 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Fri, 24 May 2013 15:55:17 -0700 Subject: rapidio/tsi721: fix bug in MSI interrupt handling Fix bug in MSI interrupt handling which causes loss of event notifications. Typical indication of lost MSI interrupts are stalled message and doorbell transfers between RapidIO endpoints. To avoid loss of MSI interrupts all interrupts from the device must be disabled on entering the interrupt handler routine and re-enabled when exiting it. Re-enabling device interrupts will trigger new MSI message(s) if Tsi721 registered new events since entering interrupt handler routine. This patch is applicable to kernel versions starting from v3.2. Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c index 6faba40..a8b2c23 100644 --- a/drivers/rapidio/devices/tsi721.c +++ b/drivers/rapidio/devices/tsi721.c @@ -471,6 +471,10 @@ static irqreturn_t tsi721_irqhandler(int irq, void *ptr) u32 intval; u32 ch_inte; + /* For MSI mode disable all device-level interrupts */ + if (priv->flags & TSI721_USING_MSI) + iowrite32(0, priv->regs + TSI721_DEV_INTE); + dev_int = ioread32(priv->regs + TSI721_DEV_INT); if (!dev_int) return IRQ_NONE; @@ -560,6 +564,14 @@ static irqreturn_t tsi721_irqhandler(int irq, void *ptr) } } #endif + + /* For MSI mode re-enable device-level interrupts */ + if (priv->flags & TSI721_USING_MSI) { + dev_int = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO | + TSI721_DEV_INT_SMSG_CH | TSI721_DEV_INT_BDMA_CH; + iowrite32(dev_int, priv->regs + TSI721_DEV_INTE); + } + return IRQ_HANDLED; } -- cgit v0.10.2 From c2cc499c5bcf9040a738f49e8051b42078205748 Mon Sep 17 00:00:00 2001 From: Leonid Yegoshin Date: Fri, 24 May 2013 15:55:18 -0700 Subject: mm compaction: fix of improper cache flush in migration code Page 'new' during MIGRATION can't be flushed with flush_cache_page(). Using flush_cache_page(vma, addr, pfn) is justified only if the page is already placed in process page table, and that is done right after flush_cache_page(). But without it the arch function has no knowledge of process PTE and does nothing. Besides that, flush_cache_page() flushes an application cache page, but the kernel has a different page virtual address and dirtied it. Replace it with flush_dcache_page(new) which is the proper usage. The old page is flushed in try_to_unmap_one() before migration. This bug takes place in Sead3 board with M14Kc MIPS CPU without cache aliasing (but Harvard arch - separate I and D cache) in tight memory environment (128MB) each 1-3days on SOAK test. It fails in cc1 during kernel build (SIGILL, SIGBUS, SIGSEG) if CONFIG_COMPACTION is switched ON. Signed-off-by: Leonid Yegoshin Cc: Leonid Yegoshin Acked-by: Rik van Riel Cc: Michal Hocko Acked-by: Mel Gorman Cc: Ralf Baechle Cc: Russell King Cc: David Miller Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/migrate.c b/mm/migrate.c index 27ed225..b1f5750 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -165,7 +165,7 @@ static int remove_migration_pte(struct page *new, struct vm_area_struct *vma, pte = arch_make_huge_pte(pte, vma, new, 0); } #endif - flush_cache_page(vma, addr, pte_pfn(pte)); + flush_dcache_page(new); set_pte_at(mm, addr, ptep, pte); if (PageHuge(new)) { -- cgit v0.10.2 From 7450231fb35492951e78a91b833fd935171f4e66 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 24 May 2013 15:55:20 -0700 Subject: linux/kernel.h: fix kernel-doc warning Fix kernel-doc warning in : Warning(include/linux/kernel.h:590): No description found for parameter 'ip' scripts/kernel-doc cannot handle macros, functions, or function prototypes between the function or macro that is being documented and its definition, so move these prototypes above the function that is being documented. Signed-off-by: Randy Dunlap Cc: Steven Rostedt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/kernel.h b/include/linux/kernel.h index e96329c..e9ef6d6 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -562,6 +562,9 @@ int __trace_bprintk(unsigned long ip, const char *fmt, ...); extern __printf(2, 3) int __trace_printk(unsigned long ip, const char *fmt, ...); +extern int __trace_bputs(unsigned long ip, const char *str); +extern int __trace_puts(unsigned long ip, const char *str, int size); + /** * trace_puts - write a string into the ftrace buffer * @str: the string to record @@ -587,8 +590,6 @@ int __trace_printk(unsigned long ip, const char *fmt, ...); * (1 when __trace_bputs is used, strlen(str) when __trace_puts is used) */ -extern int __trace_bputs(unsigned long ip, const char *str); -extern int __trace_puts(unsigned long ip, const char *str, int size); #define trace_puts(str) ({ \ static const char *trace_printk_fmt \ __attribute__((section("__trace_printk_fmt"))) = \ -- cgit v0.10.2 From 7c3425123ddfdc5f48e7913ff59d908789712b18 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Fri, 24 May 2013 15:55:21 -0700 Subject: mm/THP: use pmd_populate() to update the pmd with pgtable_t pointer We should not use set_pmd_at to update pmd_t with pgtable_t pointer. set_pmd_at is used to set pmd with huge pte entries and architectures like ppc64, clear few flags from the pte when saving a new entry. Without this change we observe bad pte errors like below on ppc64 with THP enabled. BUG: Bad page map in process ld mm=0xc000001ee39f4780 pte:7fc3f37848000001 pmd:c000001ec0000000 Signed-off-by: Aneesh Kumar K.V Cc: Hugh Dickins Cc: Benjamin Herrenschmidt Reviewed-by: Andrea Arcangeli Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/huge_memory.c b/mm/huge_memory.c index 03a89a2..362c329 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -2325,7 +2325,12 @@ static void collapse_huge_page(struct mm_struct *mm, pte_unmap(pte); spin_lock(&mm->page_table_lock); BUG_ON(!pmd_none(*pmd)); - set_pmd_at(mm, address, pmd, _pmd); + /* + * We can only use set_pmd_at when establishing + * hugepmds and never for establishing regular pmds that + * points to regular pagetables. Use pmd_populate for that + */ + pmd_populate(mm, pmd, pmd_pgtable(_pmd)); spin_unlock(&mm->page_table_lock); anon_vma_unlock_write(vma->anon_vma); goto out; -- cgit v0.10.2 From 4b949b8af12e24b8a48fa5bb775a13b558d9f4da Mon Sep 17 00:00:00 2001 From: Christian Gmeiner Date: Fri, 24 May 2013 15:55:22 -0700 Subject: drivers/leds/leds-ot200.c: fix error caused by shifted mask During the development of this driver an in-house register documentation was used. The last week some integration tests were done and this problem was found. It turned out that the released register documentation is wrong. The fix is very simple: shift all masks by one. Signed-off-by: Christian Gmeiner Cc: Bryan Wu Cc: Sebastian Andrzej Siewior Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/leds/leds-ot200.c b/drivers/leds/leds-ot200.c index ee14662..98cae52 100644 --- a/drivers/leds/leds-ot200.c +++ b/drivers/leds/leds-ot200.c @@ -47,37 +47,37 @@ static struct ot200_led leds[] = { { .name = "led_1", .port = 0x49, - .mask = BIT(7), + .mask = BIT(6), }, { .name = "led_2", .port = 0x49, - .mask = BIT(6), + .mask = BIT(5), }, { .name = "led_3", .port = 0x49, - .mask = BIT(5), + .mask = BIT(4), }, { .name = "led_4", .port = 0x49, - .mask = BIT(4), + .mask = BIT(3), }, { .name = "led_5", .port = 0x49, - .mask = BIT(3), + .mask = BIT(2), }, { .name = "led_6", .port = 0x49, - .mask = BIT(2), + .mask = BIT(1), }, { .name = "led_7", .port = 0x49, - .mask = BIT(1), + .mask = BIT(0), } }; -- cgit v0.10.2 From 97c9266b11967e6401866b0111af59fa894180bf Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 24 May 2013 15:55:23 -0700 Subject: revert "selftest: add simple test for soft-dirty bit" Revert commit 58c7be84fec8 ("selftest: add simple test for soft-dirty bit"). This is the self test for Pavel's pagemap2 patches which didn't actually get merged. Reported-by: Pavel Emelyanov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index d4abc59..0a63658 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -6,7 +6,6 @@ TARGETS += memory-hotplug TARGETS += mqueue TARGETS += net TARGETS += ptrace -TARGETS += soft-dirty TARGETS += vm all: diff --git a/tools/testing/selftests/soft-dirty/Makefile b/tools/testing/selftests/soft-dirty/Makefile deleted file mode 100644 index a9cdc82..0000000 --- a/tools/testing/selftests/soft-dirty/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -CFLAGS += -iquote../../../../include/uapi -Wall -soft-dirty: soft-dirty.c - -all: soft-dirty - -clean: - rm -f soft-dirty - -run_tests: all - @./soft-dirty || echo "soft-dirty selftests: [FAIL]" diff --git a/tools/testing/selftests/soft-dirty/soft-dirty.c b/tools/testing/selftests/soft-dirty/soft-dirty.c deleted file mode 100644 index aba4f87..0000000 --- a/tools/testing/selftests/soft-dirty/soft-dirty.c +++ /dev/null @@ -1,114 +0,0 @@ -#include -#include -#include -#include -#include -#include - -typedef unsigned long long u64; - -#define PME_PRESENT (1ULL << 63) -#define PME_SOFT_DIRTY (1Ull << 55) - -#define PAGES_TO_TEST 3 -#ifndef PAGE_SIZE -#define PAGE_SIZE 4096 -#endif - -static void get_pagemap2(char *mem, u64 *map) -{ - int fd; - - fd = open("/proc/self/pagemap2", O_RDONLY); - if (fd < 0) { - perror("Can't open pagemap2"); - exit(1); - } - - lseek(fd, (unsigned long)mem / PAGE_SIZE * sizeof(u64), SEEK_SET); - read(fd, map, sizeof(u64) * PAGES_TO_TEST); - close(fd); -} - -static inline char map_p(u64 map) -{ - return map & PME_PRESENT ? 'p' : '-'; -} - -static inline char map_sd(u64 map) -{ - return map & PME_SOFT_DIRTY ? 'd' : '-'; -} - -static int check_pte(int step, int page, u64 *map, u64 want) -{ - if ((map[page] & want) != want) { - printf("Step %d Page %d has %c%c, want %c%c\n", - step, page, - map_p(map[page]), map_sd(map[page]), - map_p(want), map_sd(want)); - return 1; - } - - return 0; -} - -static void clear_refs(void) -{ - int fd; - char *v = "4"; - - fd = open("/proc/self/clear_refs", O_WRONLY); - if (write(fd, v, 3) < 3) { - perror("Can't clear soft-dirty bit"); - exit(1); - } - close(fd); -} - -int main(void) -{ - char *mem, x; - u64 map[PAGES_TO_TEST]; - - mem = mmap(NULL, PAGES_TO_TEST * PAGE_SIZE, - PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANON, 0, 0); - - x = mem[0]; - mem[2 * PAGE_SIZE] = 'c'; - get_pagemap2(mem, map); - - if (check_pte(1, 0, map, PME_PRESENT)) - return 1; - if (check_pte(1, 1, map, 0)) - return 1; - if (check_pte(1, 2, map, PME_PRESENT | PME_SOFT_DIRTY)) - return 1; - - clear_refs(); - get_pagemap2(mem, map); - - if (check_pte(2, 0, map, PME_PRESENT)) - return 1; - if (check_pte(2, 1, map, 0)) - return 1; - if (check_pte(2, 2, map, PME_PRESENT)) - return 1; - - mem[0] = 'a'; - mem[PAGE_SIZE] = 'b'; - x = mem[2 * PAGE_SIZE]; - get_pagemap2(mem, map); - - if (check_pte(3, 0, map, PME_PRESENT | PME_SOFT_DIRTY)) - return 1; - if (check_pte(3, 1, map, PME_PRESENT | PME_SOFT_DIRTY)) - return 1; - if (check_pte(3, 2, map, PME_PRESENT)) - return 1; - - (void)x; /* gcc warn */ - - printf("PASS\n"); - return 0; -} -- cgit v0.10.2 From 6900807c6b95dcb004902302b8ac5dbfbf6feb89 Mon Sep 17 00:00:00 2001 From: Jeff Moyer Date: Fri, 24 May 2013 15:55:24 -0700 Subject: aio: fix io_getevents documentation In reviewing man pages, I noticed that io_getevents is documented to update the timeout that gets passed into the library call. This doesn't happen in kernel space or in the library (even though it's documented to do so in both places). Unless there is objection, I'd like to fix the comments/docs to match the code (I will also update the man page upon consensus). Signed-off-by: Jeff Moyer Signed-off-by: Benjamin LaHaise Acked-by: Cyril Hrubis Acked-by: Michael Kerrisk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/aio.c b/fs/aio.c index c5b1a8c..3fcdd73 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -1299,8 +1299,7 @@ SYSCALL_DEFINE3(io_cancel, aio_context_t, ctx_id, struct iocb __user *, iocb, * < min_nr if the timeout specified by timeout has elapsed * before sufficient events are available, where timeout == NULL * specifies an infinite timeout. Note that the timeout pointed to by - * timeout is relative and will be updated if not NULL and the - * operation blocks. Will fail with -ENOSYS if not implemented. + * timeout is relative. Will fail with -ENOSYS if not implemented. */ SYSCALL_DEFINE5(io_getevents, aio_context_t, ctx_id, long, min_nr, -- cgit v0.10.2 From 387b8b3e37cb1c257fb607787f73815c30d22859 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 24 May 2013 15:55:25 -0700 Subject: auditfilter.c: fix kernel-doc warnings Fix kernel-doc warnings in kernel/auditfilter.c: Warning(kernel/auditfilter.c:1029): Excess function parameter 'loginuid' description in 'audit_receive_filter' Warning(kernel/auditfilter.c:1029): Excess function parameter 'sessionid' description in 'audit_receive_filter' Warning(kernel/auditfilter.c:1029): Excess function parameter 'sid' description in 'audit_receive_filter' Signed-off-by: Randy Dunlap Cc: Eric Paris Cc: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c index 83a2970..6bd4a90 100644 --- a/kernel/auditfilter.c +++ b/kernel/auditfilter.c @@ -1021,9 +1021,6 @@ static void audit_log_rule_change(char *action, struct audit_krule *rule, int re * @seq: netlink audit message sequence (serial) number * @data: payload data * @datasz: size of payload data - * @loginuid: loginuid of sender - * @sessionid: sessionid for netlink audit message - * @sid: SE Linux Security ID of sender */ int audit_receive_filter(int type, int pid, int seq, void *data, size_t datasz) { -- cgit v0.10.2 From cac29af6bd6bc5c53499f39ef1eade193295b2f1 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 24 May 2013 15:55:26 -0700 Subject: drivers/rtc/rtc-pl031.c: pass correct pointer to free_irq() free_irq() expects the same pointer that was passed to request_irq(), otherwise the IRQ is not freed. The issue was found using the following coccinelle script: @r1@ type T; T devid; @@ request_irq(..., devid) @r2@ type r1.T; T devid; position p; @@ free_irq@p(..., devid) @@ position p != r2.p; @@ *free_irq@p(...) Signed-off-by: Lars-Peter Clausen Cc: Srinidhi Kasagar Cc: Linus Walleij Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c index 8900ea7..0f0609b 100644 --- a/drivers/rtc/rtc-pl031.c +++ b/drivers/rtc/rtc-pl031.c @@ -306,7 +306,7 @@ static int pl031_remove(struct amba_device *adev) struct pl031_local *ldata = dev_get_drvdata(&adev->dev); amba_set_drvdata(adev, NULL); - free_irq(adev->irq[0], ldata->rtc); + free_irq(adev->irq[0], ldata); rtc_device_unregister(ldata->rtc); iounmap(ldata->base); kfree(ldata); -- cgit v0.10.2 From e5ee7305ae03e43dbe2b0e346232975f793ad0eb Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 24 May 2013 15:55:27 -0700 Subject: fbdev: FB_GOLDFISH should depend on HAS_DMA If NO_DMA=y: drivers/built-in.o: In function `goldfish_fb_remove': drivers/video/goldfishfb.c:301: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `goldfish_fb_probe': drivers/video/goldfishfb.c:247: undefined reference to `dma_alloc_coherent' drivers/video/goldfishfb.c:280: undefined reference to `dma_free_coherent' Signed-off-by: Geert Uytterhoeven Cc: Florian Tobias Schandinat Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 6246056..2e937bd 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -2199,7 +2199,7 @@ config FB_XILINX config FB_GOLDFISH tristate "Goldfish Framebuffer" - depends on FB + depends on FB && HAS_DMA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT -- cgit v0.10.2 From dfd20b2b174d3a9b258ea3b7a35ead33576587b1 Mon Sep 17 00:00:00 2001 From: Brian Behlendorf Date: Fri, 24 May 2013 15:55:28 -0700 Subject: drivers/block/brd.c: fix brd_lookup_page() race The index on the page must be set before it is inserted in the radix tree. Otherwise there is a small race which can occur during lookup where the page can be found with the incorrect index. This will trigger the BUG_ON() in brd_lookup_page(). Signed-off-by: Brian Behlendorf Reported-by: Chris Wedgwood Cc: Jens Axboe Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/block/brd.c b/drivers/block/brd.c index f1a29f8..9bf4371 100644 --- a/drivers/block/brd.c +++ b/drivers/block/brd.c @@ -117,13 +117,13 @@ static struct page *brd_insert_page(struct brd_device *brd, sector_t sector) spin_lock(&brd->brd_lock); idx = sector >> PAGE_SECTORS_SHIFT; + page->index = idx; if (radix_tree_insert(&brd->brd_pages, idx, page)) { __free_page(page); page = radix_tree_lookup(&brd->brd_pages, idx); BUG_ON(!page); BUG_ON(page->index != idx); - } else - page->index = idx; + } spin_unlock(&brd->brd_lock); radix_tree_preload_end(); -- cgit v0.10.2 From 136e8770cd5d1fe38b3c613100dd6dc4db6d4fa6 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Fri, 24 May 2013 15:55:29 -0700 Subject: nilfs2: fix issue of nilfs_set_page_dirty() for page at EOF boundary nilfs2: fix issue of nilfs_set_page_dirty for page at EOF boundary DESCRIPTION: There are use-cases when NILFS2 file system (formatted with block size lesser than 4 KB) can be remounted in RO mode because of encountering of "broken bmap" issue. The issue was reported by Anthony Doggett : "The machine I've been trialling nilfs on is running Debian Testing, Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2), but I've also reproduced it (identically) with Debian Unstable amd64 and Debian Experimental (using the 3.8-trunk kernel). The problematic partitions were formatted with "mkfs.nilfs2 -b 1024 -B 8192"." SYMPTOMS: (1) System log contains error messages likewise: [63102.496756] nilfs_direct_assign: invalid pointer: 0 [63102.496786] NILFS error (device dm-17): nilfs_bmap_assign: broken bmap (inode number=28) [63102.496798] [63102.524403] Remounting filesystem read-only (2) The NILFS2 file system is remounted in RO mode. REPRODUSING PATH: (1) Create volume group with name "unencrypted" by means of vgcreate utility. (2) Run script (prepared by Anthony Doggett ): ----------------[BEGIN SCRIPT]-------------------- VG=unencrypted lvcreate --size 2G --name ntest $VG mkfs.nilfs2 -b 1024 -B 8192 /dev/mapper/$VG-ntest mkdir /var/tmp/n mkdir /var/tmp/n/ntest mount /dev/mapper/$VG-ntest /var/tmp/n/ntest mkdir /var/tmp/n/ntest/thedir cd /var/tmp/n/ntest/thedir sleep 2 date darcs init sleep 2 dmesg|tail -n 5 date darcs whatsnew || true date sleep 2 dmesg|tail -n 5 ----------------[END SCRIPT]-------------------- REPRODUCIBILITY: 100% INVESTIGATION: As it was discovered, the issue takes place during segment construction after executing such sequence of user-space operations: open("_darcs/index", O_RDWR|O_CREAT|O_NOCTTY, 0666) = 7 fstat(7, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0 ftruncate(7, 60) The error message "NILFS error (device dm-17): nilfs_bmap_assign: broken bmap (inode number=28)" takes place because of trying to get block number for third block of the file with logical offset #3072 bytes. As it is possible to see from above output, the file has 60 bytes of the whole size. So, it is enough one block (1 KB in size) allocation for the whole file. Trying to operate with several blocks instead of one takes place because of discovering several dirty buffers for this file in nilfs_segctor_scan_file() method. The root cause of this issue is in nilfs_set_page_dirty function which is called just before writing to an mmapped page. When nilfs_page_mkwrite function handles a page at EOF boundary, it fills hole blocks only inside EOF through __block_page_mkwrite(). The __block_page_mkwrite() function calls set_page_dirty() after filling hole blocks, thus nilfs_set_page_dirty function (= a_ops->set_page_dirty) is called. However, the current implementation of nilfs_set_page_dirty() wrongly marks all buffers dirty even for page at EOF boundary. As a result, buffers outside EOF are inconsistently marked dirty and queued for write even though they are not mapped with nilfs_get_block function. FIX: This modifies nilfs_set_page_dirty() not to mark hole blocks dirty. Thanks to Vyacheslav Dubeyko for his effort on analysis and proposals for this issue. Signed-off-by: Ryusuke Konishi Reported-by: Anthony Doggett Reported-by: Vyacheslav Dubeyko Cc: Vyacheslav Dubeyko Tested-by: Ryusuke Konishi Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c index 689fb60..bccfec8 100644 --- a/fs/nilfs2/inode.c +++ b/fs/nilfs2/inode.c @@ -219,13 +219,32 @@ static int nilfs_writepage(struct page *page, struct writeback_control *wbc) static int nilfs_set_page_dirty(struct page *page) { - int ret = __set_page_dirty_buffers(page); + int ret = __set_page_dirty_nobuffers(page); - if (ret) { + if (page_has_buffers(page)) { struct inode *inode = page->mapping->host; - unsigned nr_dirty = 1 << (PAGE_SHIFT - inode->i_blkbits); + unsigned nr_dirty = 0; + struct buffer_head *bh, *head; - nilfs_set_file_dirty(inode, nr_dirty); + /* + * This page is locked by callers, and no other thread + * concurrently marks its buffers dirty since they are + * only dirtied through routines in fs/buffer.c in + * which call sites of mark_buffer_dirty are protected + * by page lock. + */ + bh = head = page_buffers(page); + do { + /* Do not mark hole blocks dirty */ + if (buffer_dirty(bh) || !buffer_mapped(bh)) + continue; + + set_buffer_dirty(bh); + nr_dirty++; + } while (bh = bh->b_this_page, bh != head); + + if (nr_dirty) + nilfs_set_file_dirty(inode, nr_dirty); } return ret; } -- cgit v0.10.2 From 348f9f05e0266822fa048f7fb3b039692a0cafbc Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 24 May 2013 15:55:30 -0700 Subject: mm/memory_hotplug.c: fix printk format warnings Fix printk format warnings in mm/memory_hotplug.c by using "%pa": mm/memory_hotplug.c: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 2 has type 'resource_size_t' [-Wformat] mm/memory_hotplug.c: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'resource_size_t' [-Wformat] Signed-off-by: Randy Dunlap Reported-by: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index a221fac..1ad92b4 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -720,9 +720,12 @@ int __remove_pages(struct zone *zone, unsigned long phys_start_pfn, start = phys_start_pfn << PAGE_SHIFT; size = nr_pages * PAGE_SIZE; ret = release_mem_region_adjustable(&iomem_resource, start, size); - if (ret) - pr_warn("Unable to release resource <%016llx-%016llx> (%d)\n", - start, start + size - 1, ret); + if (ret) { + resource_size_t endres = start + size - 1; + + pr_warn("Unable to release resource <%pa-%pa> (%d)\n", + &start, &endres, ret); + } sections_to_remove = nr_pages / PAGES_PER_SECTION; for (i = 0; i < sections_to_remove; i++) { -- cgit v0.10.2 From 1e7e2e05c179a68aaf8830fe91547a87f4589e53 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Fri, 24 May 2013 15:55:31 -0700 Subject: drivers/char/random.c: fix priming of last_data Commit ec8f02da9ea5 ("random: prime last_data value per fips requirements") added priming of last_data per fips requirements. Unfortuantely, it did so in a way that can lead to multiple threads all incrementing nbytes, but only one actually doing anything with the extra data, which leads to some fun random corruption and panics. The fix is to simply do everything needed to prime last_data in a single shot, so there's no window for multiple cpus to increment nbytes -- in fact, we won't even increment or decrement nbytes anymore, we'll just extract the needed EXTRACT_SIZE one time per pool and then carry on with the normal routine. All these changes have been tested across multiple hosts and architectures where panics were previously encoutered. The code changes are are strictly limited to areas only touched when when booted in fips mode. This change should also go into 3.8-stable, to make the myriads of fips users on 3.8.x happy. Signed-off-by: Jarod Wilson Tested-by: Jan Stancek Tested-by: Jan Stodola Cc: Herbert Xu Acked-by: Neil Horman Cc: "David S. Miller" Cc: Matt Mackall Cc: "Theodore Ts'o" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/char/random.c b/drivers/char/random.c index cd9a621..73e52b7 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -957,10 +957,23 @@ static ssize_t extract_entropy(struct entropy_store *r, void *buf, { ssize_t ret = 0, i; __u8 tmp[EXTRACT_SIZE]; + unsigned long flags; /* if last_data isn't primed, we need EXTRACT_SIZE extra bytes */ - if (fips_enabled && !r->last_data_init) - nbytes += EXTRACT_SIZE; + if (fips_enabled) { + spin_lock_irqsave(&r->lock, flags); + if (!r->last_data_init) { + r->last_data_init = true; + spin_unlock_irqrestore(&r->lock, flags); + trace_extract_entropy(r->name, EXTRACT_SIZE, + r->entropy_count, _RET_IP_); + xfer_secondary_pool(r, EXTRACT_SIZE); + extract_buf(r, tmp); + spin_lock_irqsave(&r->lock, flags); + memcpy(r->last_data, tmp, EXTRACT_SIZE); + } + spin_unlock_irqrestore(&r->lock, flags); + } trace_extract_entropy(r->name, nbytes, r->entropy_count, _RET_IP_); xfer_secondary_pool(r, nbytes); @@ -970,19 +983,6 @@ static ssize_t extract_entropy(struct entropy_store *r, void *buf, extract_buf(r, tmp); if (fips_enabled) { - unsigned long flags; - - - /* prime last_data value if need be, per fips 140-2 */ - if (!r->last_data_init) { - spin_lock_irqsave(&r->lock, flags); - memcpy(r->last_data, tmp, EXTRACT_SIZE); - r->last_data_init = true; - nbytes -= EXTRACT_SIZE; - spin_unlock_irqrestore(&r->lock, flags); - extract_buf(r, tmp); - } - spin_lock_irqsave(&r->lock, flags); if (!memcmp(tmp, r->last_data, EXTRACT_SIZE)) panic("Hardware RNG duplicated output!\n"); -- cgit v0.10.2 From 10b3a32d292c21ea5b3ad5ca5975e88bb20b8d68 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Fri, 24 May 2013 15:55:33 -0700 Subject: random: fix accounting race condition with lockless irq entropy_count update Commit 902c098a3663 ("random: use lockless techniques in the interrupt path") turned IRQ path from being spinlock protected into lockless cmpxchg-retry update. That commit removed r->lock serialization between crediting entropy bits from IRQ context and accounting when extracting entropy on userspace read path, but didn't turn the r->entropy_count reads/updates in account() to use cmpxchg as well. It has been observed, that under certain circumstances this leads to read() on /dev/urandom to return 0 (EOF), as r->entropy_count gets corrupted and becomes negative, which in turn results in propagating 0 all the way from account() to the actual read() call. Convert the accounting code to be the proper lockless counterpart of what has been partially done by 902c098a3663. Signed-off-by: Jiri Kosina Cc: Theodore Ts'o Cc: Greg KH Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/char/random.c b/drivers/char/random.c index 73e52b7..35487e8 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -865,16 +865,24 @@ static size_t account(struct entropy_store *r, size_t nbytes, int min, if (r->entropy_count / 8 < min + reserved) { nbytes = 0; } else { + int entropy_count, orig; +retry: + entropy_count = orig = ACCESS_ONCE(r->entropy_count); /* If limited, never pull more than available */ - if (r->limit && nbytes + reserved >= r->entropy_count / 8) - nbytes = r->entropy_count/8 - reserved; - - if (r->entropy_count / 8 >= nbytes + reserved) - r->entropy_count -= nbytes*8; - else - r->entropy_count = reserved; + if (r->limit && nbytes + reserved >= entropy_count / 8) + nbytes = entropy_count/8 - reserved; + + if (entropy_count / 8 >= nbytes + reserved) { + entropy_count -= nbytes*8; + if (cmpxchg(&r->entropy_count, orig, entropy_count) != orig) + goto retry; + } else { + entropy_count = reserved; + if (cmpxchg(&r->entropy_count, orig, entropy_count) != orig) + goto retry; + } - if (r->entropy_count < random_write_wakeup_thresh) + if (entropy_count < random_write_wakeup_thresh) wakeup_write = 1; } -- cgit v0.10.2 From b4ca2b4b577c3530e34dcfaafccb2cc680ce95d1 Mon Sep 17 00:00:00 2001 From: Joseph Qi Date: Fri, 24 May 2013 15:55:34 -0700 Subject: ocfs2: goto out_unlock if ocfs2_get_clusters_nocache() failed in ocfs2_fiemap() Last time we found there is lock/unlock bug in ocfs2_file_aio_write, and then we did a thorough search for all lock resources in ocfs2_inode_info, including rw, inode and open lockres and found this bug. My kernel version is 3.0.13, and it is also in the lastest version 3.9. In ocfs2_fiemap, once ocfs2_get_clusters_nocache failed, it should goto out_unlock instead of out, because we need release buffer head, up read alloc sem and unlock inode. Signed-off-by: Joseph Qi Reviewed-by: Jie Liu Cc: Mark Fasheh Cc: Joel Becker Acked-by: Sunil Mushran Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/ocfs2/extent_map.c b/fs/ocfs2/extent_map.c index 1c39efb..2487116 100644 --- a/fs/ocfs2/extent_map.c +++ b/fs/ocfs2/extent_map.c @@ -790,7 +790,7 @@ int ocfs2_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, &hole_size, &rec, &is_last); if (ret) { mlog_errno(ret); - goto out; + goto out_unlock; } if (rec.e_blkno == 0ULL) { -- cgit v0.10.2 From 43c523bff7c3b47506d536c10637be8399dfd85f Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Fri, 24 May 2013 15:55:35 -0700 Subject: drivers/rtc/rtc-max8998.c: check for pdata presence before dereferencing Currently the driver can crash with a NULL pointer dereference if no pdata is provided, despite of successful registration of the MFD part. This patch fixes the problem by adding a NULL check before dereferencing the pdata pointer. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Cc: Sachin Kamat Reviewed-by: Jingoo Han Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/rtc-max8998.c b/drivers/rtc/rtc-max8998.c index 48b6612..d5af7ba 100644 --- a/drivers/rtc/rtc-max8998.c +++ b/drivers/rtc/rtc-max8998.c @@ -285,7 +285,7 @@ static int max8998_rtc_probe(struct platform_device *pdev) info->irq, ret); dev_info(&pdev->dev, "RTC CHIP NAME: %s\n", pdev->id_entry->name); - if (pdata->rtc_delay) { + if (pdata && pdata->rtc_delay) { info->lp3974_bug_workaround = true; dev_warn(&pdev->dev, "LP3974 with RTC REGERR option." " RTC updates will be extremely slow.\n"); -- cgit v0.10.2 From a9ff785e4437c83d2179161e012f5bdfbd6381f0 Mon Sep 17 00:00:00 2001 From: Cliff Wickman Date: Fri, 24 May 2013 15:55:36 -0700 Subject: mm/pagewalk.c: walk_page_range should avoid VM_PFNMAP areas A panic can be caused by simply cat'ing /proc//smaps while an application has a VM_PFNMAP range. It happened in-house when a benchmarker was trying to decipher the memory layout of his program. /proc//smaps and similar walks through a user page table should not be looking at VM_PFNMAP areas. Certain tests in walk_page_range() (specifically split_huge_page_pmd()) assume that all the mapped PFN's are backed with page structures. And this is not usually true for VM_PFNMAP areas. This can result in panics on kernel page faults when attempting to address those page structures. There are a half dozen callers of walk_page_range() that walk through a task's entire page table (as N. Horiguchi pointed out). So rather than change all of them, this patch changes just walk_page_range() to ignore VM_PFNMAP areas. The logic of hugetlb_vma() is moved back into walk_page_range(), as we want to test any vma in the range. VM_PFNMAP areas are used by: - graphics memory manager gpu/drm/drm_gem.c - global reference unit sgi-gru/grufile.c - sgi special memory char/mspec.c - and probably several out-of-tree modules [akpm@linux-foundation.org: remove now-unused hugetlb_vma() stub] Signed-off-by: Cliff Wickman Reviewed-by: Naoya Horiguchi Cc: Mel Gorman Cc: Andrea Arcangeli Cc: Dave Hansen Cc: David Sterba Cc: Johannes Weiner Cc: KOSAKI Motohiro Cc: "Kirill A. Shutemov" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/pagewalk.c b/mm/pagewalk.c index 35aa294..5da2cbc 100644 --- a/mm/pagewalk.c +++ b/mm/pagewalk.c @@ -127,28 +127,7 @@ static int walk_hugetlb_range(struct vm_area_struct *vma, return 0; } -static struct vm_area_struct* hugetlb_vma(unsigned long addr, struct mm_walk *walk) -{ - struct vm_area_struct *vma; - - /* We don't need vma lookup at all. */ - if (!walk->hugetlb_entry) - return NULL; - - VM_BUG_ON(!rwsem_is_locked(&walk->mm->mmap_sem)); - vma = find_vma(walk->mm, addr); - if (vma && vma->vm_start <= addr && is_vm_hugetlb_page(vma)) - return vma; - - return NULL; -} - #else /* CONFIG_HUGETLB_PAGE */ -static struct vm_area_struct* hugetlb_vma(unsigned long addr, struct mm_walk *walk) -{ - return NULL; -} - static int walk_hugetlb_range(struct vm_area_struct *vma, unsigned long addr, unsigned long end, struct mm_walk *walk) @@ -198,30 +177,53 @@ int walk_page_range(unsigned long addr, unsigned long end, if (!walk->mm) return -EINVAL; + VM_BUG_ON(!rwsem_is_locked(&walk->mm->mmap_sem)); + pgd = pgd_offset(walk->mm, addr); do { - struct vm_area_struct *vma; + struct vm_area_struct *vma = NULL; next = pgd_addr_end(addr, end); /* - * handle hugetlb vma individually because pagetable walk for - * the hugetlb page is dependent on the architecture and - * we can't handled it in the same manner as non-huge pages. + * This function was not intended to be vma based. + * But there are vma special cases to be handled: + * - hugetlb vma's + * - VM_PFNMAP vma's */ - vma = hugetlb_vma(addr, walk); + vma = find_vma(walk->mm, addr); if (vma) { - if (vma->vm_end < next) + /* + * There are no page structures backing a VM_PFNMAP + * range, so do not allow split_huge_page_pmd(). + */ + if ((vma->vm_start <= addr) && + (vma->vm_flags & VM_PFNMAP)) { next = vma->vm_end; + pgd = pgd_offset(walk->mm, next); + continue; + } /* - * Hugepage is very tightly coupled with vma, so - * walk through hugetlb entries within a given vma. + * Handle hugetlb vma individually because pagetable + * walk for the hugetlb page is dependent on the + * architecture and we can't handled it in the same + * manner as non-huge pages. */ - err = walk_hugetlb_range(vma, addr, next, walk); - if (err) - break; - pgd = pgd_offset(walk->mm, next); - continue; + if (walk->hugetlb_entry && (vma->vm_start <= addr) && + is_vm_hugetlb_page(vma)) { + if (vma->vm_end < next) + next = vma->vm_end; + /* + * Hugepage is very tightly coupled with vma, + * so walk through hugetlb entries within a + * given vma. + */ + err = walk_hugetlb_range(vma, addr, next, walk); + if (err) + break; + pgd = pgd_offset(walk->mm, next); + continue; + } } if (pgd_none_or_clear_bad(pgd)) { -- cgit v0.10.2 From 03e04f048d2774aabd126fbad84729d4ba9dc40a Mon Sep 17 00:00:00 2001 From: Benjamin LaHaise Date: Fri, 24 May 2013 15:55:38 -0700 Subject: aio: fix kioctx not being freed after cancellation at exit time The recent changes overhauling fs/aio.c introduced a bug that results in the kioctx not being freed when outstanding kiocbs are cancelled at exit_aio() time. Specifically, a kiocb that is cancelled has its completion events discarded by batch_complete_aio(), which then fails to wake up the process stuck in free_ioctx(). Fix this by modifying the wait_event() condition in free_ioctx() appropriately. This patch was tested with the cancel operation in the thread based code posted yesterday. [akpm@linux-foundation.org: fix build] Signed-off-by: Benjamin LaHaise Signed-off-by: Kent Overstreet Cc: Kent Overstreet Cc: Josh Boyer Cc: Zach Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/aio.c b/fs/aio.c index 3fcdd73..7fe5bde 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -307,7 +307,9 @@ static void free_ioctx(struct kioctx *ctx) kunmap_atomic(ring); while (atomic_read(&ctx->reqs_active) > 0) { - wait_event(ctx->wait, head != ctx->tail); + wait_event(ctx->wait, + head != ctx->tail || + atomic_read(&ctx->reqs_active) <= 0); avail = (head <= ctx->tail ? ctx->tail : ctx->nr_events) - head; -- cgit v0.10.2 From 7bb66f6e6eecdd8e10ed3a63bd28c1e9105adc79 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Sat, 25 May 2013 14:04:25 +0530 Subject: ARC: lazy dcache flush broke gdb in non-aliasing configs gdbserver inserting a breakpoint ends up calling copy_user_page() for a code page. The generic version of which (non-aliasing config) didn't set the PG_arch_1 bit hence update_mmu_cache() didn't sync dcache/icache for corresponding dynamic loader code page - causing garbade to be executed. So now aliasing versions of copy_user_highpage()/clear_page() are made default. There is no significant overhead since all of special alias handling code is compiled out for non-aliasing build Signed-off-by: Vineet Gupta diff --git a/arch/arc/include/asm/page.h b/arch/arc/include/asm/page.h index 374a355..ab84bf1 100644 --- a/arch/arc/include/asm/page.h +++ b/arch/arc/include/asm/page.h @@ -19,13 +19,6 @@ #define clear_page(paddr) memset((paddr), 0, PAGE_SIZE) #define copy_page(to, from) memcpy((to), (from), PAGE_SIZE) -#ifndef CONFIG_ARC_CACHE_VIPT_ALIASING - -#define clear_user_page(addr, vaddr, pg) clear_page(addr) -#define copy_user_page(vto, vfrom, vaddr, pg) copy_page(vto, vfrom) - -#else /* VIPT aliasing dcache */ - struct vm_area_struct; struct page; @@ -35,8 +28,6 @@ void copy_user_highpage(struct page *to, struct page *from, unsigned long u_vaddr, struct vm_area_struct *vma); void clear_user_page(void *to, unsigned long u_vaddr, struct page *page); -#endif /* CONFIG_ARC_CACHE_VIPT_ALIASING */ - #undef STRICT_MM_TYPECHECKS #ifdef STRICT_MM_TYPECHECKS diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c index d4b7bb6..aedce19 100644 --- a/arch/arc/mm/cache_arc700.c +++ b/arch/arc/mm/cache_arc700.c @@ -676,6 +676,17 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, flush_cache_all(); } +void flush_anon_page(struct vm_area_struct *vma, struct page *page, + unsigned long u_vaddr) +{ + /* TBD: do we really need to clear the kernel mapping */ + __flush_dcache_page(page_address(page), u_vaddr); + __flush_dcache_page(page_address(page), page_address(page)); + +} + +#endif + void copy_user_highpage(struct page *to, struct page *from, unsigned long u_vaddr, struct vm_area_struct *vma) { @@ -725,16 +736,6 @@ void clear_user_page(void *to, unsigned long u_vaddr, struct page *page) set_bit(PG_arch_1, &page->flags); } -void flush_anon_page(struct vm_area_struct *vma, struct page *page, - unsigned long u_vaddr) -{ - /* TBD: do we really need to clear the kernel mapping */ - __flush_dcache_page(page_address(page), u_vaddr); - __flush_dcache_page(page_address(page), page_address(page)); - -} - -#endif /********************************************************************** * Explicit Cache flush request from user space via syscall -- cgit v0.10.2 From 39d4ecdb711ba44e0aa0b2f3db74ed5ac97abe21 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Fri, 24 May 2013 11:38:24 +0100 Subject: ASoC: wm5110: Correct DSP4R Mixer control name Signed-off-by: Charles Keepax Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c index c00480b..ba38f06 100644 --- a/sound/soc/codecs/wm5110.c +++ b/sound/soc/codecs/wm5110.c @@ -190,7 +190,7 @@ ARIZONA_MIXER_CONTROLS("DSP2R", ARIZONA_DSP2RMIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("DSP3L", ARIZONA_DSP3LMIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("DSP3R", ARIZONA_DSP3RMIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("DSP4L", ARIZONA_DSP4LMIX_INPUT_1_SOURCE), -ARIZONA_MIXER_CONTROLS("DSP5R", ARIZONA_DSP4RMIX_INPUT_1_SOURCE), +ARIZONA_MIXER_CONTROLS("DSP4R", ARIZONA_DSP4RMIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("Mic", ARIZONA_MICMIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("Noise", ARIZONA_NOISEMIX_INPUT_1_SOURCE), -- cgit v0.10.2 From 6b3f7b5c2221c7a4fe715ea4fd479b6d07bbcbb5 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Sat, 25 May 2013 12:54:08 -0400 Subject: score: remove redundant kcore_list entries kcore_vmalloc is in fs/proc/kcore.c and kcore_mem is unused across the tree. Noticed while grepping the tree for some other kcore stuff. (score looks pretty unmaintained to me.) Signed-off-by: Kyle McMartin Signed-off-by: Linus Torvalds diff --git a/arch/score/mm/init.c b/arch/score/mm/init.c index d8f988a..0940682 100644 --- a/arch/score/mm/init.c +++ b/arch/score/mm/init.c @@ -41,8 +41,6 @@ unsigned long empty_zero_page; EXPORT_SYMBOL_GPL(empty_zero_page); -static struct kcore_list kcore_mem, kcore_vmalloc; - static void setup_zero_page(void) { struct page *page; -- cgit v0.10.2 From 4d2593cc65fa15f2a36313aa8d03a0937226ad49 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 22 May 2013 23:09:50 +0000 Subject: qlge: add missing free_netdev() on error in qlge_probe() Add the missing free_netdev() before return from function qlge_probe() in the error handling case. Signed-off-by: Wei Yongjun Acked-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_main.c b/drivers/net/ethernet/qlogic/qlge/qlge_main.c index 50235d2..f87cc21 100644 --- a/drivers/net/ethernet/qlogic/qlge/qlge_main.c +++ b/drivers/net/ethernet/qlogic/qlge/qlge_main.c @@ -4717,6 +4717,7 @@ static int qlge_probe(struct pci_dev *pdev, dev_err(&pdev->dev, "net device registration failed.\n"); ql_release_all(pdev); pci_disable_device(pdev); + free_netdev(ndev); return err; } /* Start up the timer to trigger EEH if -- cgit v0.10.2 From 0d8c3e77e7fba8c84c871b43f35029daa92acc17 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 22 May 2013 23:59:28 +0000 Subject: ptp_pch: fix error handling in pch_probe() Fix to release resources when ptp_clock_register() fail instead of return error code directly. Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller diff --git a/drivers/ptp/ptp_pch.c b/drivers/ptp/ptp_pch.c index bea9451..71a2559 100644 --- a/drivers/ptp/ptp_pch.c +++ b/drivers/ptp/ptp_pch.c @@ -628,9 +628,10 @@ pch_probe(struct pci_dev *pdev, const struct pci_device_id *id) chip->caps = ptp_pch_caps; chip->ptp_clock = ptp_clock_register(&chip->caps, &pdev->dev); - - if (IS_ERR(chip->ptp_clock)) - return PTR_ERR(chip->ptp_clock); + if (IS_ERR(chip->ptp_clock)) { + ret = PTR_ERR(chip->ptp_clock); + goto err_ptp_clock_reg; + } spin_lock_init(&chip->register_lock); @@ -669,6 +670,7 @@ pch_probe(struct pci_dev *pdev, const struct pci_device_id *id) err_req_irq: ptp_clock_unregister(chip->ptp_clock); +err_ptp_clock_reg: iounmap(chip->regs); chip->regs = NULL; -- cgit v0.10.2 From a622260254ee481747cceaaa8609985b29a31565 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 24 May 2013 05:49:58 +0000 Subject: ip_tunnel: fix kernel panic with icmp_dest_unreach Daniel Petre reported crashes in icmp_dst_unreach() with following call graph: #3 [ffff88003fc03938] __stack_chk_fail at ffffffff81037f77 #4 [ffff88003fc03948] icmp_send at ffffffff814d5fec #5 [ffff88003fc03ae8] ipv4_link_failure at ffffffff814a1795 #6 [ffff88003fc03af8] ipgre_tunnel_xmit at ffffffff814e7965 #7 [ffff88003fc03b78] dev_hard_start_xmit at ffffffff8146e032 #8 [ffff88003fc03bc8] sch_direct_xmit at ffffffff81487d66 #9 [ffff88003fc03c08] __qdisc_run at ffffffff81487efd #10 [ffff88003fc03c48] dev_queue_xmit at ffffffff8146e5a7 #11 [ffff88003fc03c88] ip_finish_output at ffffffff814ab596 Daniel found a similar problem mentioned in http://lkml.indiana.edu/hypermail/linux/kernel/1007.0/00961.html And indeed this is the root cause : skb->cb[] contains data fooling IP stack. We must clear IPCB in ip_tunnel_xmit() sooner in case dst_link_failure() is called. Or else skb->cb[] might contain garbage from GSO segmentation layer. A similar fix was tested on linux-3.9, but gre code was refactored in linux-3.10. I'll send patches for stable kernels as well. Many thanks to Daniel for providing reports, patches and testing ! Reported-by: Daniel Petre Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c index e4147ec..be2f8da 100644 --- a/net/ipv4/ip_tunnel.c +++ b/net/ipv4/ip_tunnel.c @@ -503,6 +503,7 @@ void ip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev, inner_iph = (const struct iphdr *)skb_inner_network_header(skb); + memset(IPCB(skb), 0, sizeof(*IPCB(skb))); dst = tnl_params->daddr; if (dst == 0) { /* NBMA tunnel */ @@ -658,7 +659,6 @@ void ip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev, skb_dst_drop(skb); skb_dst_set(skb, &rt->dst); - memset(IPCB(skb), 0, sizeof(*IPCB(skb))); /* Push down and install the IP header. */ skb_push(skb, sizeof(struct iphdr)); -- cgit v0.10.2 From f6825748bdbe381cfffe2dc13ca0b73050428fac Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Mon, 15 Apr 2013 17:08:35 +0200 Subject: mmc: sdhci-esdhc-imx: Fix SDIO interrupts Currently SDIO interrupts do not work on i.MX53 and maybe others. This was observed with a Marvell 8787 based SDIO wifi adapter using the mwifiex driver and firmware from the Marvell git repository. The symptom was a timeout after firmware download. Observing the SDIO_DAT1 line showed that an interrupt was requested (level 0) but no interrupt was generated in software, the line stayed low until a timeout ocurred and the card was reset. There is a Freescale errata ENGcm11186 "eSDHC misses SDIO interrupt when CINT is disabled" The workaround suggested by this errata is already implemented and involves clearing and then setting the D3CD bit in the host control register [see esdhc_writel_le()] However, when esdhc_writeb_le() is later used to write to SDHCI_HOST_CONTROL it always resets the D3CD bit. To fix this simply add the D3CD bit to the set of bits not modified by esdhc_writeb_le(). Signed-off-by: Martin Fuzzey Signed-off-by: Chris Ball diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 67d6dde..9b0a0a9 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -324,8 +324,10 @@ static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg) /* * Do not touch buswidth bits here. This is done in * esdhc_pltfm_bus_width. + * Do not touch the D3CD bit either which is used for the + * SDIO interrupt errata workaround. */ - mask = 0xffff & ~ESDHC_CTRL_BUSWIDTH_MASK; + mask = 0xffff & ~(ESDHC_CTRL_BUSWIDTH_MASK | ESDHC_CTRL_D3CD); esdhc_clrset_le(host, mask, new_val, reg); return; -- cgit v0.10.2 From 361b8482026c926997b1d3d5a045bc9f5bc02b16 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Fri, 15 Mar 2013 09:49:26 +0100 Subject: mmc: sdhci-esdhc-imx: fix multiblock reads on i.MX53 The eSDHC controller on the i.MX53 needs an additional, non spec compliant CMD12 after a multiblock read with a predefined number of blocks. Otherwise the internal state machine won't go back to the idle state. This commit effectively reverts 5b6b0ad6 (mmc: sdhci-esdhc-imx: fix for mmc cards on i.MX5), which fixed part of the problem by making multiblock reads work, however this fix was not sufficient when multi- and singleblock reads got intermixed. This implements the recommended workaround (Freescale i.MX Reference Manual, section 29.6.8 "Multi-block Read") by manually sending a CMD12 with the RSPTYP bits cleared. Signed-off-by: Lucas Stach Signed-off-by: Chris Ball diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 9b0a0a9..d5f0d59 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -85,6 +85,12 @@ struct pltfm_imx_data { struct clk *clk_ipg; struct clk *clk_ahb; struct clk *clk_per; + enum { + NO_CMD_PENDING, /* no multiblock command pending*/ + MULTIBLK_IN_PROCESS, /* exact multiblock cmd in process */ + WAIT_FOR_INT, /* sent CMD12, waiting for response INT */ + } multiblock_status; + }; static struct platform_device_id imx_esdhc_devtype[] = { @@ -154,6 +160,8 @@ static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, i static u32 esdhc_readl_le(struct sdhci_host *host, int reg) { + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = pltfm_host->priv; u32 val = readl(host->ioaddr + reg); if (unlikely(reg == SDHCI_CAPABILITIES)) { @@ -175,6 +183,18 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int reg) val &= ~ESDHC_INT_VENDOR_SPEC_DMA_ERR; val |= SDHCI_INT_ADMA_ERROR; } + + /* + * mask off the interrupt we get in response to the manually + * sent CMD12 + */ + if ((imx_data->multiblock_status == WAIT_FOR_INT) && + ((val & SDHCI_INT_RESPONSE) == SDHCI_INT_RESPONSE)) { + val &= ~SDHCI_INT_RESPONSE; + writel(SDHCI_INT_RESPONSE, host->ioaddr + + SDHCI_INT_STATUS); + imx_data->multiblock_status = NO_CMD_PENDING; + } } return val; @@ -211,6 +231,15 @@ static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg) v = readl(host->ioaddr + ESDHC_VENDOR_SPEC); v &= ~ESDHC_VENDOR_SPEC_SDIO_QUIRK; writel(v, host->ioaddr + ESDHC_VENDOR_SPEC); + + if (imx_data->multiblock_status == MULTIBLK_IN_PROCESS) + { + /* send a manual CMD12 with RESPTYP=none */ + data = MMC_STOP_TRANSMISSION << 24 | + SDHCI_CMD_ABORTCMD << 16; + writel(data, host->ioaddr + SDHCI_TRANSFER_MODE); + imx_data->multiblock_status = WAIT_FOR_INT; + } } if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)) { @@ -277,11 +306,13 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) } return; case SDHCI_COMMAND: - if ((host->cmd->opcode == MMC_STOP_TRANSMISSION || - host->cmd->opcode == MMC_SET_BLOCK_COUNT) && - (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)) + if (host->cmd->opcode == MMC_STOP_TRANSMISSION) val |= SDHCI_CMD_ABORTCMD; + if ((host->cmd->opcode == MMC_SET_BLOCK_COUNT) && + (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)) + imx_data->multiblock_status = MULTIBLK_IN_PROCESS; + if (is_imx6q_usdhc(imx_data)) writel(val << 16, host->ioaddr + SDHCI_TRANSFER_MODE); -- cgit v0.10.2 From 8c964df07aaf0e70d1756d204c306f69ca5023b8 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Fri, 19 Apr 2013 09:11:22 +0000 Subject: mmc: atmel-mci: convert to dma_request_slave_channel_compat() Use generic DMA DT helper. Platforms booting with or without DT populated are both supported. Signed-off-by: Ludovic Desroches Acked-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Nicolas Ferre Signed-off-by: Chris Ball diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index e75774f..aca59d9 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -2230,10 +2230,15 @@ static void __exit atmci_cleanup_slot(struct atmel_mci_slot *slot, mmc_free_host(slot->mmc); } -static bool atmci_filter(struct dma_chan *chan, void *slave) +static bool atmci_filter(struct dma_chan *chan, void *pdata) { - struct mci_dma_data *sl = slave; + struct mci_platform_data *sl_pdata = pdata; + struct mci_dma_data *sl; + if (!sl_pdata) + return false; + + sl = sl_pdata->dma_slave; if (sl && find_slave_dev(sl) == chan->device->dev) { chan->private = slave_data_ptr(sl); return true; @@ -2245,24 +2250,18 @@ static bool atmci_filter(struct dma_chan *chan, void *slave) static bool atmci_configure_dma(struct atmel_mci *host) { struct mci_platform_data *pdata; + dma_cap_mask_t mask; if (host == NULL) return false; pdata = host->pdev->dev.platform_data; - if (!pdata) - return false; + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); - if (pdata->dma_slave && find_slave_dev(pdata->dma_slave)) { - dma_cap_mask_t mask; - - /* Try to grab a DMA channel */ - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - host->dma.chan = - dma_request_channel(mask, atmci_filter, pdata->dma_slave); - } + host->dma.chan = dma_request_slave_channel_compat(mask, atmci_filter, pdata, + &host->pdev->dev, "rxtx"); if (!host->dma.chan) { dev_warn(&host->pdev->dev, "no DMA channel available\n"); return false; -- cgit v0.10.2 From 1d1ff45871984364056ebfc528ed31ff7f03f970 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 26 Apr 2013 11:27:21 +0300 Subject: mmc: sdhci-acpi: fix initial runtime pm status Initial runtime pm status is active. Signed-off-by: Adrian Hunter Signed-off-by: Chris Ball diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c index 7bcf74b..1da5f29 100644 --- a/drivers/mmc/host/sdhci-acpi.c +++ b/drivers/mmc/host/sdhci-acpi.c @@ -202,6 +202,7 @@ static int sdhci_acpi_probe(struct platform_device *pdev) goto err_free; if (c->use_runtime_pm) { + pm_runtime_set_active(dev); pm_suspend_ignore_children(dev, 1); pm_runtime_set_autosuspend_delay(dev, 50); pm_runtime_use_autosuspend(dev); -- cgit v0.10.2 From 07a588837be0a18075fedf71e6963b5109abec03 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 26 Apr 2013 11:27:22 +0300 Subject: mmc: sdhci-acpi: add more device ids Add three more ACPI HIDs. Also, as some devices must be further distinguished by ACPI UID, slot information is now associated with HID and UID. Signed-off-by: Adrian Hunter Signed-off-by: Chris Ball diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c index 1da5f29..706d9cb 100644 --- a/drivers/mmc/host/sdhci-acpi.c +++ b/drivers/mmc/host/sdhci-acpi.c @@ -87,6 +87,12 @@ static const struct sdhci_ops sdhci_acpi_ops_dflt = { .enable_dma = sdhci_acpi_enable_dma, }; +static const struct sdhci_acpi_slot sdhci_acpi_slot_int_emmc = { + .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, + .caps2 = MMC_CAP2_HC_ERASE_SZ, + .flags = SDHCI_ACPI_RUNTIME_PM, +}; + static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = { .quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON, .caps = MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD, @@ -94,23 +100,67 @@ static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = { .pm_caps = MMC_PM_KEEP_POWER, }; +static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sd = { +}; + +struct sdhci_acpi_uid_slot { + const char *hid; + const char *uid; + const struct sdhci_acpi_slot *slot; +}; + +static const struct sdhci_acpi_uid_slot sdhci_acpi_uids[] = { + { "80860F14" , "1" , &sdhci_acpi_slot_int_emmc }, + { "80860F14" , "3" , &sdhci_acpi_slot_int_sd }, + { "INT33BB" , "2" , &sdhci_acpi_slot_int_sdio }, + { "INT33C6" , NULL, &sdhci_acpi_slot_int_sdio }, + { "PNP0D40" }, + { }, +}; + static const struct acpi_device_id sdhci_acpi_ids[] = { - { "INT33C6", (kernel_ulong_t)&sdhci_acpi_slot_int_sdio }, - { "PNP0D40" }, + { "80860F14" }, + { "INT33BB" }, + { "INT33C6" }, + { "PNP0D40" }, { }, }; MODULE_DEVICE_TABLE(acpi, sdhci_acpi_ids); -static const struct sdhci_acpi_slot *sdhci_acpi_get_slot(const char *hid) +static const struct sdhci_acpi_slot *sdhci_acpi_get_slot_by_ids(const char *hid, + const char *uid) { - const struct acpi_device_id *id; - - for (id = sdhci_acpi_ids; id->id[0]; id++) - if (!strcmp(id->id, hid)) - return (const struct sdhci_acpi_slot *)id->driver_data; + const struct sdhci_acpi_uid_slot *u; + + for (u = sdhci_acpi_uids; u->hid; u++) { + if (strcmp(u->hid, hid)) + continue; + if (!u->uid) + return u->slot; + if (uid && !strcmp(u->uid, uid)) + return u->slot; + } return NULL; } +static const struct sdhci_acpi_slot *sdhci_acpi_get_slot(acpi_handle handle, + const char *hid) +{ + const struct sdhci_acpi_slot *slot; + struct acpi_device_info *info; + const char *uid = NULL; + acpi_status status; + + status = acpi_get_object_info(handle, &info); + if (!ACPI_FAILURE(status) && (info->valid & ACPI_VALID_UID)) + uid = info->unique_id.string; + + slot = sdhci_acpi_get_slot_by_ids(hid, uid); + + kfree(info); + return slot; +} + static int sdhci_acpi_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -148,7 +198,7 @@ static int sdhci_acpi_probe(struct platform_device *pdev) c = sdhci_priv(host); c->host = host; - c->slot = sdhci_acpi_get_slot(hid); + c->slot = sdhci_acpi_get_slot(handle, hid); c->pdev = pdev; c->use_runtime_pm = sdhci_acpi_flag(c, SDHCI_ACPI_RUNTIME_PM); -- cgit v0.10.2 From 728ef3d1939e23e26067608d8d8da9571be14b1d Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 26 Apr 2013 11:27:23 +0300 Subject: mmc: sdhci-pci: add more device ids Add three more PCI device ids. Signed-off-by: Adrian Hunter Signed-off-by: Chris Ball diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index 0012d3f..701d06d 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -33,6 +33,9 @@ */ #define PCI_DEVICE_ID_INTEL_PCH_SDIO0 0x8809 #define PCI_DEVICE_ID_INTEL_PCH_SDIO1 0x880a +#define PCI_DEVICE_ID_INTEL_BYT_EMMC 0x0f14 +#define PCI_DEVICE_ID_INTEL_BYT_SDIO 0x0f15 +#define PCI_DEVICE_ID_INTEL_BYT_SD 0x0f16 /* * PCI registers @@ -304,6 +307,33 @@ static const struct sdhci_pci_fixes sdhci_intel_pch_sdio = { .probe_slot = pch_hc_probe_slot, }; +static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot) +{ + slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE; + slot->host->mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ; + return 0; +} + +static int byt_sdio_probe_slot(struct sdhci_pci_slot *slot) +{ + slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_NONREMOVABLE; + return 0; +} + +static const struct sdhci_pci_fixes sdhci_intel_byt_emmc = { + .allow_runtime_pm = true, + .probe_slot = byt_emmc_probe_slot, +}; + +static const struct sdhci_pci_fixes sdhci_intel_byt_sdio = { + .quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON, + .allow_runtime_pm = true, + .probe_slot = byt_sdio_probe_slot, +}; + +static const struct sdhci_pci_fixes sdhci_intel_byt_sd = { +}; + /* O2Micro extra registers */ #define O2_SD_LOCK_WP 0xD3 #define O2_SD_MULTI_VCC3V 0xEE @@ -856,6 +886,30 @@ static const struct pci_device_id pci_ids[] = { }, { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_BYT_EMMC, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_intel_byt_emmc, + }, + + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_BYT_SDIO, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_intel_byt_sdio, + }, + + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_BYT_SD, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_intel_byt_sd, + }, + + { .vendor = PCI_VENDOR_ID_O2, .device = PCI_DEVICE_ID_O2_8120, .subvendor = PCI_ANY_ID, -- cgit v0.10.2 From cf5ae40b3968ca769e683b9b071685ad82ee893c Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 10 May 2013 17:42:33 +0530 Subject: mmc: omap_hsmmc: Fix the DT pbias workaround for MMC controllers 2 to 5 Otherwise SDIO cards won't necessarily work when booted with device tree as we will never power down the SDIO cards. This means the SDIO card reset does not happen which at least some WLAN controllers expect to happen with ifconfig wlan0 down. The PBIAS voltage is only available for the first controller instance, so let's limit the PBIAS workaround to the first controller only. Signed-off-by: Tony Lindgren Tested-by: Luciano Coelho Signed-off-by: Balaji T K Signed-off-by: Chris Ball diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 6e44025..29a63d2 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -161,6 +161,7 @@ struct omap_hsmmc_host { */ struct regulator *vcc; struct regulator *vcc_aux; + int pbias_disable; void __iomem *base; resource_size_t mapbase; spinlock_t irq_lock; /* Prevent races with irq handler */ @@ -255,11 +256,11 @@ static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on, if (!host->vcc) return 0; /* - * With DT, never turn OFF the regulator. This is because + * With DT, never turn OFF the regulator for MMC1. This is because * the pbias cell programming support is still missing when * booting with Device tree */ - if (dev->of_node && !vdd) + if (host->pbias_disable && !vdd) return 0; if (mmc_slot(host).before_set_reg) @@ -1520,10 +1521,10 @@ static void omap_hsmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) (ios->vdd == DUAL_VOLT_OCR_BIT) && /* * With pbias cell programming missing, this - * can't be allowed when booting with device + * can't be allowed on MMC1 when booting with device * tree. */ - !host->dev->of_node) { + !host->pbias_disable) { /* * The mmc_select_voltage fn of the core does * not seem to set the power_mode to @@ -1871,6 +1872,10 @@ static int omap_hsmmc_probe(struct platform_device *pdev) omap_hsmmc_context_save(host); + /* This can be removed once we support PBIAS with DT */ + if (host->dev->of_node && host->mapbase == 0x4809c000) + host->pbias_disable = 1; + host->dbclk = clk_get(&pdev->dev, "mmchsdb_fck"); /* * MMC can still work without debounce clock. -- cgit v0.10.2 From d272fbf0ca4a59339c768d76858f4add6ff36ace Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Fri, 10 May 2013 17:42:34 +0530 Subject: mmc: omap_hsmmc: convert to dma_request_slave_channel_compat Convert dmaengine channel requests to use dma_request_slave_channel_compat(). This supports platforms booting with or without DT populated. Signed-off-by: Matt Porter Acked-by: Tony Lindgren Acked-by: Arnd Bergmann Signed-off-by: Balaji T K Signed-off-by: Chris Ball diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 29a63d2..dc89aea 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1930,14 +1930,20 @@ static int omap_hsmmc_probe(struct platform_device *pdev) dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); - host->rx_chan = dma_request_channel(mask, omap_dma_filter_fn, &rx_req); + host->rx_chan = + dma_request_slave_channel_compat(mask, omap_dma_filter_fn, + &rx_req, &pdev->dev, "rx"); + if (!host->rx_chan) { dev_err(mmc_dev(host->mmc), "unable to obtain RX DMA engine channel %u\n", rx_req); ret = -ENXIO; goto err_irq; } - host->tx_chan = dma_request_channel(mask, omap_dma_filter_fn, &tx_req); + host->tx_chan = + dma_request_slave_channel_compat(mask, omap_dma_filter_fn, + &tx_req, &pdev->dev, "tx"); + if (!host->tx_chan) { dev_err(mmc_dev(host->mmc), "unable to obtain TX DMA engine channel %u\n", tx_req); ret = -ENXIO; -- cgit v0.10.2 From 4a29b5591faf25555fdf2b717594d50f70c15066 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Fri, 10 May 2013 17:42:35 +0530 Subject: mmc: omap_hsmmc: Skip platform_get_resource_byname() for dt case MMC driver probe will abort for DT case because of failed platform_get_resource_byname() lookup. Fix it by skipping resource lookup byname for device tree build. Issue is hidden because hwmod populates the IO resources which helps to succeed platform_get_resource_byname() and probe. Signed-off-by: Santosh Shilimkar Signed-off-by: Balaji T K Signed-off-by: Chris Ball diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index dc89aea..eccedc7 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1911,21 +1911,23 @@ static int omap_hsmmc_probe(struct platform_device *pdev) omap_hsmmc_conf_bus_power(host); - res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx"); - if (!res) { - dev_err(mmc_dev(host->mmc), "cannot get DMA TX channel\n"); - ret = -ENXIO; - goto err_irq; - } - tx_req = res->start; + if (!pdev->dev.of_node) { + res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx"); + if (!res) { + dev_err(mmc_dev(host->mmc), "cannot get DMA TX channel\n"); + ret = -ENXIO; + goto err_irq; + } + tx_req = res->start; - res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx"); - if (!res) { - dev_err(mmc_dev(host->mmc), "cannot get DMA RX channel\n"); - ret = -ENXIO; - goto err_irq; + res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx"); + if (!res) { + dev_err(mmc_dev(host->mmc), "cannot get DMA RX channel\n"); + ret = -ENXIO; + goto err_irq; + } + rx_req = res->start; } - rx_req = res->start; dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); -- cgit v0.10.2 From ab465df9dda42a997f7537c875127eeb6a88158c Mon Sep 17 00:00:00 2001 From: Manfred Spraul Date: Sun, 26 May 2013 11:08:52 +0200 Subject: ipc/sem.c: Fix missing wakeups in do_smart_update_queue() do_smart_update_queue() is called when an operation (semop, semctl(SETVAL), semctl(SETALL), ...) modified the array. It must check which of the sleeping tasks can proceed. do_smart_update_queue() missed a few wakeups: - if a sleeping complex op was completed, then all per-semaphore queues must be scanned - not only those that were modified by *sops - if a sleeping simple op proceeded, then the global queue must be scanned again And: - the test for "|sops == NULL) before scanning the global queue is not required: If the global queue is empty, then it doesn't need to be scanned - regardless of the reason for calling do_smart_update_queue() The patch is not optimized, i.e. even completing a wait-for-zero operation causes a rescan. This is done to keep the patch as simple as possible. Signed-off-by: Manfred Spraul Acked-by: Davidlohr Bueso Cc: Rik van Riel Cc: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/ipc/sem.c b/ipc/sem.c index a7e40ed..70480a3 100644 --- a/ipc/sem.c +++ b/ipc/sem.c @@ -752,19 +752,29 @@ static void do_smart_update(struct sem_array *sma, struct sembuf *sops, int nsop int otime, struct list_head *pt) { int i; + int progress; - if (sma->complex_count || sops == NULL) { - if (update_queue(sma, -1, pt)) + progress = 1; +retry_global: + if (sma->complex_count) { + if (update_queue(sma, -1, pt)) { + progress = 1; otime = 1; + sops = NULL; + } } + if (!progress) + goto done; if (!sops) { /* No semops; something special is going on. */ for (i = 0; i < sma->sem_nsems; i++) { - if (update_queue(sma, i, pt)) + if (update_queue(sma, i, pt)) { otime = 1; + progress = 1; + } } - goto done; + goto done_checkretry; } /* Check the semaphores that were modified. */ @@ -772,8 +782,15 @@ static void do_smart_update(struct sem_array *sma, struct sembuf *sops, int nsop if (sops[i].sem_op > 0 || (sops[i].sem_op < 0 && sma->sem_base[sops[i].sem_num].semval == 0)) - if (update_queue(sma, sops[i].sem_num, pt)) + if (update_queue(sma, sops[i].sem_num, pt)) { otime = 1; + progress = 1; + } + } +done_checkretry: + if (progress) { + progress = 0; + goto retry_global; } done: if (otime) -- cgit v0.10.2 From e4aa937ec75df0eea0bee03bffa3303ad36c986b Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 26 May 2013 16:00:47 -0700 Subject: Linux 3.10-rc3 diff --git a/Makefile b/Makefile index 93875f5..73e20db 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 10 SUBLEVEL = 0 -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 NAME = Unicycling Gorilla # *DOCUMENTATION* -- cgit v0.10.2 From 9acf73b7d06eaa3fbfbfafc9c835f8fe0d751eff Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 22 May 2013 10:24:37 +0200 Subject: s390/smp: lost IPIs on cpu hotplug IPIs might be lost when a cpu gets brought offline: When stop_machine executes its state machine there is a race window for the state STOPMACHINE_DISABLE_IRQ where the to be brought offline cpu might already have irqs disabled but a different cpu still may have irqs enabled. If the enabled cpu receives an interrupt and as a result sends an IPI to the to be offlined cpu in its bottom halve context, the IPI won't be noticed before the cpu is offline. In fact the race window is much larger since there is no guarantee when an IPI will be received. To fix this check for enqueued but not yet received IPIs in the cpu_disable() path and call the respective handlers before the cpu is marked offline. Reported-by: Juergen Doelle Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 05674b6..4f977d0 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -428,34 +428,27 @@ void smp_stop_cpu(void) * This is the main routine where commands issued by other * cpus are handled. */ -static void do_ext_call_interrupt(struct ext_code ext_code, - unsigned int param32, unsigned long param64) +static void smp_handle_ext_call(void) { unsigned long bits; - int cpu; - - cpu = smp_processor_id(); - if (ext_code.code == 0x1202) - inc_irq_stat(IRQEXT_EXC); - else - inc_irq_stat(IRQEXT_EMS); - /* - * handle bit signal external calls - */ - bits = xchg(&pcpu_devices[cpu].ec_mask, 0); + /* handle bit signal external calls */ + bits = xchg(&pcpu_devices[smp_processor_id()].ec_mask, 0); if (test_bit(ec_stop_cpu, &bits)) smp_stop_cpu(); - if (test_bit(ec_schedule, &bits)) scheduler_ipi(); - if (test_bit(ec_call_function, &bits)) generic_smp_call_function_interrupt(); - if (test_bit(ec_call_function_single, &bits)) generic_smp_call_function_single_interrupt(); +} +static void do_ext_call_interrupt(struct ext_code ext_code, + unsigned int param32, unsigned long param64) +{ + inc_irq_stat(ext_code.code == 0x1202 ? IRQEXT_EXC : IRQEXT_EMS); + smp_handle_ext_call(); } void arch_send_call_function_ipi_mask(const struct cpumask *mask) @@ -760,6 +753,8 @@ int __cpu_disable(void) { unsigned long cregs[16]; + /* Handle possible pending IPIs */ + smp_handle_ext_call(); set_cpu_online(smp_processor_id(), false); /* Disable pseudo page faults on this cpu. */ pfault_fini(); -- cgit v0.10.2 From 1351c5d3b189a487fbacd5cdf2dc3e6faf12c682 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 23 May 2013 23:09:56 +0200 Subject: mac80211: assign AP_VLAN hw queues correctly A lot of code in mac80211 assumes that the hw queues are set up correctly for all interfaces (except for monitor) but this isn't true for AP_VLAN interfaces. Fix this by copying the AP master configuration when an AP VLAN is brought up, after this the AP interface can't change its configuration any more and needs to be brought down to change it, which also forces AP_VLAN interfaces down, so just copying in open() is sufficient. Reported-by: Jouni Malinen Signed-off-by: Johannes Berg diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 68f51c3..00e2238 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -474,6 +474,9 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up) master->control_port_protocol; sdata->control_port_no_encrypt = master->control_port_no_encrypt; + sdata->vif.cab_queue = master->vif.cab_queue; + memcpy(sdata->vif.hw_queue, master->vif.hw_queue, + sizeof(sdata->vif.hw_queue)); break; } case NL80211_IFTYPE_AP: -- cgit v0.10.2 From c8aa22db0112f640ac6631347f850879c621840b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 24 May 2013 01:06:09 +0200 Subject: mac80211: close AP_VLAN interfaces before unregistering all Since Eric's commit efe117ab8 ("Speedup ieee80211_remove_interfaces") there's a bug in mac80211 when it unregisters with AP_VLAN interfaces up. If the AP_VLAN interface was registered after the AP it belongs to (which is the typical case) and then we get into this code path, unregister_netdevice_many() will crash because it isn't prepared to deal with interfaces being closed in the middle of it. Exactly this happens though, because we iterate the list, find the AP master this AP_VLAN belongs to and dev_close() the dependent VLANs. After this, unregister_netdevice_many() won't pick up the fact that the AP_VLAN is already down and will do it again, causing a crash. Cc: stable@vger.kernel.org [2.6.33+] Cc: Eric Dumazet Signed-off-by: Johannes Berg diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 00e2238..ceef644 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -1703,6 +1703,15 @@ void ieee80211_remove_interfaces(struct ieee80211_local *local) ASSERT_RTNL(); + /* + * Close all AP_VLAN interfaces first, as otherwise they + * might be closed while the AP interface they belong to + * is closed, causing unregister_netdevice_many() to crash. + */ + list_for_each_entry(sdata, &local->interfaces, list) + if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) + dev_close(sdata->dev); + mutex_lock(&local->iflist_mtx); list_for_each_entry_safe(sdata, tmp, &local->interfaces, list) { list_del(&sdata->list); -- cgit v0.10.2 From ac20976dcaeea3e77e40e9aac8f3799d2a22ea2b Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Mon, 27 May 2013 10:43:09 +0200 Subject: mac80211: Allow single vif mac address change with addr_mask When changing the MAC address of a single vif mac80211 will check if the new address fits into the address mask specified by the driver. This only needs to be done when using multiple BSSIDs. Hence, check the new address only against all other vifs. Also fix the MAC address assignment on new interfaces if the user changed the address of a vif such that perm_addr is not covered by addr_mask anymore. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=57371 Signed-off-by: Helmut Schaa Signed-off-by: Jakub Kicinski Reported-by: Alessandro Lannocca Cc: Alessandro Lannocca Cc: Bruno Randolf Signed-off-by: Johannes Berg diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index ceef644..98d20c0 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -159,9 +159,10 @@ static int ieee80211_change_mtu(struct net_device *dev, int new_mtu) return 0; } -static int ieee80211_verify_mac(struct ieee80211_local *local, u8 *addr) +static int ieee80211_verify_mac(struct ieee80211_sub_if_data *sdata, u8 *addr) { - struct ieee80211_sub_if_data *sdata; + struct ieee80211_local *local = sdata->local; + struct ieee80211_sub_if_data *iter; u64 new, mask, tmp; u8 *m; int ret = 0; @@ -181,11 +182,14 @@ static int ieee80211_verify_mac(struct ieee80211_local *local, u8 *addr) mutex_lock(&local->iflist_mtx); - list_for_each_entry(sdata, &local->interfaces, list) { - if (sdata->vif.type == NL80211_IFTYPE_MONITOR) + list_for_each_entry(iter, &local->interfaces, list) { + if (iter == sdata) continue; - m = sdata->vif.addr; + if (iter->vif.type == NL80211_IFTYPE_MONITOR) + continue; + + m = iter->vif.addr; tmp = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) | ((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) | ((u64)m[4] << 1*8) | ((u64)m[5] << 0*8); @@ -209,7 +213,7 @@ static int ieee80211_change_mac(struct net_device *dev, void *addr) if (ieee80211_sdata_running(sdata)) return -EBUSY; - ret = ieee80211_verify_mac(sdata->local, sa->sa_data); + ret = ieee80211_verify_mac(sdata, sa->sa_data); if (ret) return ret; @@ -1486,7 +1490,17 @@ static void ieee80211_assign_perm_addr(struct ieee80211_local *local, break; } + /* + * Pick address of existing interface in case user changed + * MAC address manually, default to perm_addr. + */ m = local->hw.wiphy->perm_addr; + list_for_each_entry(sdata, &local->interfaces, list) { + if (sdata->vif.type == NL80211_IFTYPE_MONITOR) + continue; + m = sdata->vif.addr; + break; + } start = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) | ((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) | ((u64)m[4] << 1*8) | ((u64)m[5] << 0*8); -- cgit v0.10.2 From a87783699b23395c46bbeeb5d28f6db24897bf26 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 22 May 2013 10:48:10 +0300 Subject: iwlwifi: dvm: fix zero LQ CMD sending avoidance In 63b77bf489881747c5118476918cc8c29378ee63 iwlwifi: dvm: don't send zeroed LQ cmd I tried to avoid to send zeroed LQ cmd, but I made a (very) stupid mistake in the memcmp. Since this patch has been ported to stable, the fix should go to stable too. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=58341 Cc: stable@vger.kernel.org Reported-by: Hinnerk van Bruinehsen Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/sta.c b/drivers/net/wireless/iwlwifi/dvm/sta.c index db183b4..c3c13ce 100644 --- a/drivers/net/wireless/iwlwifi/dvm/sta.c +++ b/drivers/net/wireless/iwlwifi/dvm/sta.c @@ -735,7 +735,7 @@ void iwl_restore_stations(struct iwl_priv *priv, struct iwl_rxon_context *ctx) memcpy(&lq, priv->stations[i].lq, sizeof(struct iwl_link_quality_cmd)); - if (!memcmp(&lq, &zero_lq, sizeof(lq))) + if (memcmp(&lq, &zero_lq, sizeof(lq))) send_lq = true; } spin_unlock_bh(&priv->sta_lock); -- cgit v0.10.2 From f6a12a7d0b1a70e969ae4f6d7c5201cdaf6edde0 Mon Sep 17 00:00:00 2001 From: "Meyer, Kirk" Date: Thu, 23 May 2013 17:06:57 +0000 Subject: microblaze: Reversed logic in futex cmpxchg futex_atomic_cmpxchg_inatomic exchanged if the values were unequal rather than equal. This caused incorrect behavior of robust futexes. Signed-off-by: Kirk Meyer Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/futex.h b/arch/microblaze/include/asm/futex.h index ff8cde1..01848f0 100644 --- a/arch/microblaze/include/asm/futex.h +++ b/arch/microblaze/include/asm/futex.h @@ -105,7 +105,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, __asm__ __volatile__ ("1: lwx %1, %3, r0; \ cmp %2, %1, %4; \ - beqi %2, 3f; \ + bnei %2, 3f; \ 2: swx %5, %3, r0; \ addic %2, r0, 0; \ bnei %2, 1b; \ -- cgit v0.10.2 From dc7b3eb900aab02e5cafbca3948d005be13fb4a5 Mon Sep 17 00:00:00 2001 From: Grzegorz Lyczba Date: Mon, 13 May 2013 23:56:24 +0200 Subject: ipvs: Fix reuse connection if real server is dead Expire cached connection for new TCP/SCTP connection if real server is down. Otherwise, IPVS uses the dead server for the reused connection, instead of a new working one. Signed-off-by: Grzegorz Lyczba Acked-by: Hans Schillstrom Acked-by: Julian Anastasov Signed-off-by: Simon Horman Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c index 085b588..05565d2 100644 --- a/net/netfilter/ipvs/ip_vs_core.c +++ b/net/netfilter/ipvs/ip_vs_core.c @@ -1001,6 +1001,32 @@ static inline int is_tcp_reset(const struct sk_buff *skb, int nh_len) return th->rst; } +static inline bool is_new_conn(const struct sk_buff *skb, + struct ip_vs_iphdr *iph) +{ + switch (iph->protocol) { + case IPPROTO_TCP: { + struct tcphdr _tcph, *th; + + th = skb_header_pointer(skb, iph->len, sizeof(_tcph), &_tcph); + if (th == NULL) + return false; + return th->syn; + } + case IPPROTO_SCTP: { + sctp_chunkhdr_t *sch, schunk; + + sch = skb_header_pointer(skb, iph->len + sizeof(sctp_sctphdr_t), + sizeof(schunk), &schunk); + if (sch == NULL) + return false; + return sch->type == SCTP_CID_INIT; + } + default: + return false; + } +} + /* Handle response packets: rewrite addresses and send away... */ static unsigned int @@ -1612,6 +1638,15 @@ ip_vs_in(unsigned int hooknum, struct sk_buff *skb, int af) * Check if the packet belongs to an existing connection entry */ cp = pp->conn_in_get(af, skb, &iph, 0); + + if (unlikely(sysctl_expire_nodest_conn(ipvs)) && cp && cp->dest && + unlikely(!atomic_read(&cp->dest->weight)) && !iph.fragoffs && + is_new_conn(skb, &iph)) { + ip_vs_conn_expire_now(cp); + __ip_vs_conn_put(cp); + cp = NULL; + } + if (unlikely(!cp) && !iph.fragoffs) { /* No (second) fragments need to enter here, as nf_defrag_ipv6 * replayed fragment zero will already have created the cp -- cgit v0.10.2 From 2c06897e4597b1cd68ef29e4145917a751c2b4cd Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 16 May 2013 12:15:35 +0100 Subject: ARM: ux500: Only configure wake-up reasons on ux500 based platforms Multiplatform calls all enabled platforms' initcalls. In the ux500_idle_init() initcall we call into the DBx500-PRCMU which in turn executes some ux500 specific register reads/writes. When running on some !ux500 platforms this ends up causing a kernel Oops. This patch ensures the PRCMU call is only invoked when running on ux500 based platforms. Reported-by: Rob Herring Signed-off-by: Lee Jones Signed-off-by: Linus Walleij diff --git a/arch/arm/mach-ux500/cpuidle.c b/arch/arm/mach-ux500/cpuidle.c index 317a2be..a45dd09 100644 --- a/arch/arm/mach-ux500/cpuidle.c +++ b/arch/arm/mach-ux500/cpuidle.c @@ -21,6 +21,7 @@ #include #include "db8500-regs.h" +#include "id.h" static atomic_t master = ATOMIC_INIT(0); static DEFINE_SPINLOCK(master_lock); @@ -114,6 +115,9 @@ static struct cpuidle_driver ux500_idle_driver = { int __init ux500_idle_init(void) { + if (!(cpu_is_u8500_family() || cpu_is_ux540_family())) + return -ENODEV; + /* Configure wake up reasons */ prcmu_enable_wakeups(PRCMU_WAKEUP(ARM) | PRCMU_WAKEUP(RTC) | PRCMU_WAKEUP(ABB)); -- cgit v0.10.2 From 67b7c75e1a42f8288450203cd80a26b11dab8582 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 24 May 2013 12:22:19 +0100 Subject: ARM: ux500: Provide supplies for AUX1, AUX2 and AUX3 This patch fixes a bug introduced in the v3.10 merge window. The AB8500 External Regulator driver has recently landed upstream, which registers each of the 3 external regulators located on the AB8500. If these regulators are marked as 'always on', there is a potential for power-loss. If they're not and are seemingly unused the Regulator subsystem will attempt to disable them to save power. This causes an issue for AUX1, AUX2 and AUX3 as they obtain their power from EXT3. So we're specifying that here to prevent EXT3 from being powered down. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 33c353b..d6b7c85 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -374,6 +374,7 @@ static struct ab8500_regulator_reg_init ab8500_reg_init[] = { static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { /* supplies to the display/camera */ [AB8500_LDO_AUX1] = { + .supply_regulator = "ab8500-ext-supply3", .constraints = { .name = "V-DISPLAY", .min_uV = 2800000, @@ -387,6 +388,7 @@ static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { }, /* supplies to the on-board eMMC */ [AB8500_LDO_AUX2] = { + .supply_regulator = "ab8500-ext-supply3", .constraints = { .name = "V-eMMC1", .min_uV = 1100000, @@ -402,6 +404,7 @@ static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { }, /* supply for VAUX3, supplies to SDcard slots */ [AB8500_LDO_AUX3] = { + .supply_regulator = "ab8500-ext-supply3", .constraints = { .name = "V-MMC-SD", .min_uV = 1100000, -- cgit v0.10.2 From 449875756055e2fff6074b4e69b35b9583f9f84d Mon Sep 17 00:00:00 2001 From: "Lad, Prabhakar" Date: Mon, 13 May 2013 06:39:07 -0300 Subject: [media] drivers/staging: davinci: vpfe: fix dependency for building the driver from commit 3778d05036cc7ddd983ae2451da579af00acdac2 [media: davinci: kconfig: fix incorrect selects] VIDEO_VPFE_CAPTURE was removed but there was a negative dependancy for building the DM365 VPFE MC based capture driver (VIDEO_DM365_VPFE), This patch fixes this dependency by replacing the VIDEO_VPFE_CAPTURE with VIDEO_DM365_ISIF, so as when older DM365 ISIF v4l driver is selected the newer media controller driver for DM365 isnt visible. Reported-by: Paul Bolle Signed-off-by: Lad, Prabhakar Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/staging/media/davinci_vpfe/Kconfig b/drivers/staging/media/davinci_vpfe/Kconfig index 2e4a28b..12f321d 100644 --- a/drivers/staging/media/davinci_vpfe/Kconfig +++ b/drivers/staging/media/davinci_vpfe/Kconfig @@ -1,6 +1,6 @@ config VIDEO_DM365_VPFE tristate "DM365 VPFE Media Controller Capture Driver" - depends on VIDEO_V4L2 && ARCH_DAVINCI_DM365 && !VIDEO_VPFE_CAPTURE + depends on VIDEO_V4L2 && ARCH_DAVINCI_DM365 && !VIDEO_DM365_ISIF select VIDEOBUF2_DMA_CONTIG help Support for DM365 VPFE based Media Controller Capture driver. -- cgit v0.10.2 From 6719a4974600fdaa4a3ac2ea2aed819a35d06605 Mon Sep 17 00:00:00 2001 From: Xiong Zhou Date: Fri, 17 May 2013 07:24:05 -0300 Subject: [media] staging/solo6x10: select the desired font Make sure FONT_8x16 can be found by find_font(). Signed-off-by: Xiong Zhou Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/staging/media/solo6x10/Kconfig b/drivers/staging/media/solo6x10/Kconfig index ec32776..0bc743b 100644 --- a/drivers/staging/media/solo6x10/Kconfig +++ b/drivers/staging/media/solo6x10/Kconfig @@ -4,6 +4,7 @@ config SOLO6X10 select VIDEOBUF2_DMA_SG select VIDEOBUF2_DMA_CONTIG select SND_PCM + select FONT_8x16 ---help--- This driver supports the Softlogic based MPEG-4 and h.264 codec cards. -- cgit v0.10.2 From d9f998639f539613bb25cbbca380c81c892d586c Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Thu, 16 May 2013 21:33:18 -0700 Subject: pinctrl: samsung: fix suspend/resume functionality The GPIO states need to be restored after s2r and this is not currently supported in the pinctrl driver. This patch saves the gpio states before suspend and restores them after resume. Saving and restoring is done very early using syscore_ops and must happen before pins are released from their powerdown state. Patch originally from Prathyush K but rewritten by Doug Anderson . Signed-off-by: Prathyush K Signed-off-by: Doug Anderson Tested-by: Tomasz Figa Acked-by: Kukjin Kim Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index 055d016..15db258 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -28,6 +28,7 @@ #include #include #include +#include #include "core.h" #include "pinctrl-samsung.h" @@ -48,6 +49,9 @@ static struct pin_config { { "samsung,pin-pud-pdn", PINCFG_TYPE_PUD_PDN }, }; +/* Global list of devices (struct samsung_pinctrl_drv_data) */ +LIST_HEAD(drvdata_list); + static unsigned int pin_base; static inline struct samsung_pin_bank *gc_to_pin_bank(struct gpio_chip *gc) @@ -956,9 +960,145 @@ static int samsung_pinctrl_probe(struct platform_device *pdev) ctrl->eint_wkup_init(drvdata); platform_set_drvdata(pdev, drvdata); + + /* Add to the global list */ + list_add_tail(&drvdata->node, &drvdata_list); + return 0; } +#ifdef CONFIG_PM + +/** + * samsung_pinctrl_suspend_dev - save pinctrl state for suspend for a device + * + * Save data for all banks handled by this device. + */ +static void samsung_pinctrl_suspend_dev( + struct samsung_pinctrl_drv_data *drvdata) +{ + struct samsung_pin_ctrl *ctrl = drvdata->ctrl; + void __iomem *virt_base = drvdata->virt_base; + int i; + + for (i = 0; i < ctrl->nr_banks; i++) { + struct samsung_pin_bank *bank = &ctrl->pin_banks[i]; + void __iomem *reg = virt_base + bank->pctl_offset; + + u8 *offs = bank->type->reg_offset; + u8 *widths = bank->type->fld_width; + enum pincfg_type type; + + /* Registers without a powerdown config aren't lost */ + if (!widths[PINCFG_TYPE_CON_PDN]) + continue; + + for (type = 0; type < PINCFG_TYPE_NUM; type++) + if (widths[type]) + bank->pm_save[type] = readl(reg + offs[type]); + + if (widths[PINCFG_TYPE_FUNC] * bank->nr_pins > 32) { + /* Some banks have two config registers */ + bank->pm_save[PINCFG_TYPE_NUM] = + readl(reg + offs[PINCFG_TYPE_FUNC] + 4); + pr_debug("Save %s @ %p (con %#010x %08x)\n", + bank->name, reg, + bank->pm_save[PINCFG_TYPE_FUNC], + bank->pm_save[PINCFG_TYPE_NUM]); + } else { + pr_debug("Save %s @ %p (con %#010x)\n", bank->name, + reg, bank->pm_save[PINCFG_TYPE_FUNC]); + } + } +} + +/** + * samsung_pinctrl_resume_dev - restore pinctrl state from suspend for a device + * + * Restore one of the banks that was saved during suspend. + * + * We don't bother doing anything complicated to avoid glitching lines since + * we're called before pad retention is turned off. + */ +static void samsung_pinctrl_resume_dev(struct samsung_pinctrl_drv_data *drvdata) +{ + struct samsung_pin_ctrl *ctrl = drvdata->ctrl; + void __iomem *virt_base = drvdata->virt_base; + int i; + + for (i = 0; i < ctrl->nr_banks; i++) { + struct samsung_pin_bank *bank = &ctrl->pin_banks[i]; + void __iomem *reg = virt_base + bank->pctl_offset; + + u8 *offs = bank->type->reg_offset; + u8 *widths = bank->type->fld_width; + enum pincfg_type type; + + /* Registers without a powerdown config aren't lost */ + if (!widths[PINCFG_TYPE_CON_PDN]) + continue; + + if (widths[PINCFG_TYPE_FUNC] * bank->nr_pins > 32) { + /* Some banks have two config registers */ + pr_debug("%s @ %p (con %#010x %08x => %#010x %08x)\n", + bank->name, reg, + readl(reg + offs[PINCFG_TYPE_FUNC]), + readl(reg + offs[PINCFG_TYPE_FUNC] + 4), + bank->pm_save[PINCFG_TYPE_FUNC], + bank->pm_save[PINCFG_TYPE_NUM]); + writel(bank->pm_save[PINCFG_TYPE_NUM], + reg + offs[PINCFG_TYPE_FUNC] + 4); + } else { + pr_debug("%s @ %p (con %#010x => %#010x)\n", bank->name, + reg, readl(reg + offs[PINCFG_TYPE_FUNC]), + bank->pm_save[PINCFG_TYPE_FUNC]); + } + for (type = 0; type < PINCFG_TYPE_NUM; type++) + if (widths[type]) + writel(bank->pm_save[type], reg + offs[type]); + } +} + +/** + * samsung_pinctrl_suspend - save pinctrl state for suspend + * + * Save data for all banks across all devices. + */ +static int samsung_pinctrl_suspend(void) +{ + struct samsung_pinctrl_drv_data *drvdata; + + list_for_each_entry(drvdata, &drvdata_list, node) { + samsung_pinctrl_suspend_dev(drvdata); + } + + return 0; +} + +/** + * samsung_pinctrl_resume - restore pinctrl state for suspend + * + * Restore data for all banks across all devices. + */ +static void samsung_pinctrl_resume(void) +{ + struct samsung_pinctrl_drv_data *drvdata; + + list_for_each_entry_reverse(drvdata, &drvdata_list, node) { + samsung_pinctrl_resume_dev(drvdata); + } +} + +#else +#define samsung_pinctrl_suspend NULL +#define samsung_pinctrl_resume NULL +#endif + +static struct syscore_ops samsung_pinctrl_syscore_ops = { + .suspend = samsung_pinctrl_suspend, + .resume = samsung_pinctrl_resume, +}; + static const struct of_device_id samsung_pinctrl_dt_match[] = { #ifdef CONFIG_PINCTRL_EXYNOS { .compatible = "samsung,exynos4210-pinctrl", @@ -987,6 +1127,14 @@ static struct platform_driver samsung_pinctrl_driver = { static int __init samsung_pinctrl_drv_register(void) { + /* + * Register syscore ops for save/restore of registers across suspend. + * It's important to ensure that this driver is running at an earlier + * initcall level than any arch-specific init calls that install syscore + * ops that turn off pad retention (like exynos_pm_resume). + */ + register_syscore_ops(&samsung_pinctrl_syscore_ops); + return platform_driver_register(&samsung_pinctrl_driver); } postcore_initcall(samsung_pinctrl_drv_register); diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h index 7c7f9eb..9f5cc81 100644 --- a/drivers/pinctrl/pinctrl-samsung.h +++ b/drivers/pinctrl/pinctrl-samsung.h @@ -127,6 +127,7 @@ struct samsung_pin_bank_type { * @gpio_chip: GPIO chip of the bank. * @grange: linux gpio pin range supported by this bank. * @slock: spinlock protecting bank registers + * @pm_save: saved register values during suspend */ struct samsung_pin_bank { struct samsung_pin_bank_type *type; @@ -144,6 +145,8 @@ struct samsung_pin_bank { struct gpio_chip gpio_chip; struct pinctrl_gpio_range grange; spinlock_t slock; + + u32 pm_save[PINCFG_TYPE_NUM + 1]; /* +1 to handle double CON registers*/ }; /** @@ -189,6 +192,7 @@ struct samsung_pin_ctrl { /** * struct samsung_pinctrl_drv_data: wrapper for holding driver data together. + * @node: global list node * @virt_base: register base address of the controller. * @dev: device instance representing the controller. * @irq: interrpt number used by the controller to notify gpio interrupts. @@ -201,6 +205,7 @@ struct samsung_pin_ctrl { * @nr_function: number of such pin functions. */ struct samsung_pinctrl_drv_data { + struct list_head node; void __iomem *virt_base; struct device *dev; int irq; -- cgit v0.10.2 From ad350cd9d5411353397843c8f410a6e7e84a71f9 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Fri, 17 May 2013 18:24:27 +0200 Subject: pinctrl: exynos: Add support for set_irq_wake of wake-up EINTs This patch adds support of IRQ wake-up ability configuration for wake-up EINTs on Exynos SoCs. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Tested-by: Doug Anderson Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c index ac74281..4f868e5 100644 --- a/drivers/pinctrl/pinctrl-exynos.c +++ b/drivers/pinctrl/pinctrl-exynos.c @@ -326,6 +326,28 @@ static int exynos_wkup_irq_set_type(struct irq_data *irqd, unsigned int type) return 0; } +static u32 exynos_eint_wake_mask = 0xffffffff; + +u32 exynos_get_eint_wake_mask(void) +{ + return exynos_eint_wake_mask; +} + +static int exynos_wkup_irq_set_wake(struct irq_data *irqd, unsigned int on) +{ + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); + unsigned long bit = 1UL << (2 * bank->eint_offset + irqd->hwirq); + + pr_info("wake %s for irq %d\n", on ? "enabled" : "disabled", irqd->irq); + + if (!on) + exynos_eint_wake_mask |= bit; + else + exynos_eint_wake_mask &= ~bit; + + return 0; +} + /* * irq_chip for wakeup interrupts */ @@ -335,6 +357,7 @@ static struct irq_chip exynos_wkup_irq_chip = { .irq_mask = exynos_wkup_irq_mask, .irq_ack = exynos_wkup_irq_ack, .irq_set_type = exynos_wkup_irq_set_type, + .irq_set_wake = exynos_wkup_irq_set_wake, }; /* interrupt handler for wakeup interrupts 0..15 */ -- cgit v0.10.2 From b134dc3feaa5136b376c7d2658bbe156bea19e63 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Fri, 17 May 2013 18:24:28 +0200 Subject: ARM: EXYNOS: Fix EINT wake-up mask configuration when pinctrl is used On DT-enabled systems pinctrl-exynos driver is responsible for handling of wake-up EINT interrupts. This patch adjusts wake-up mask configuration code to take wake-up mask value from pinctrl-exynos driver on DT-enabled systems. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Tested-by: Doug Anderson Signed-off-by: Linus Walleij diff --git a/arch/arm/mach-exynos/include/mach/pm-core.h b/arch/arm/mach-exynos/include/mach/pm-core.h index 7dbbfec..296090e 100644 --- a/arch/arm/mach-exynos/include/mach/pm-core.h +++ b/arch/arm/mach-exynos/include/mach/pm-core.h @@ -18,8 +18,15 @@ #ifndef __ASM_ARCH_PM_CORE_H #define __ASM_ARCH_PM_CORE_H __FILE__ +#include #include +#ifdef CONFIG_PINCTRL_EXYNOS +extern u32 exynos_get_eint_wake_mask(void); +#else +static inline u32 exynos_get_eint_wake_mask(void) { return 0xffffffff; } +#endif + static inline void s3c_pm_debug_init_uart(void) { /* nothing here yet */ @@ -27,7 +34,12 @@ static inline void s3c_pm_debug_init_uart(void) static inline void s3c_pm_arch_prepare_irqs(void) { - __raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK); + u32 eintmask = s3c_irqwake_eintmask; + + if (of_have_populated_dt()) + eintmask = exynos_get_eint_wake_mask(); + + __raw_writel(eintmask, S5P_EINT_WAKEUP_MASK); __raw_writel(s3c_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK); } -- cgit v0.10.2 From 97fc463769f1564e8eda2e2f70d3b6e92a25ff16 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 19 May 2013 13:58:37 +0800 Subject: pinctrl: Don't override the error code in probe error handling Otherwise, we return 0 in probe error paths when gpiochip_remove() returns 0. Also show error message if gpiochip_remove() fails. Signed-off-by: Axel Lin Acked-by: Tony Prisk Acked-by: Maxime Ripard Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-coh901.c b/drivers/pinctrl/pinctrl-coh901.c index a67af41..d6b4174 100644 --- a/drivers/pinctrl/pinctrl-coh901.c +++ b/drivers/pinctrl/pinctrl-coh901.c @@ -830,7 +830,8 @@ static int __init u300_gpio_probe(struct platform_device *pdev) return 0; err_no_range: - err = gpiochip_remove(&gpio->chip); + if (gpiochip_remove(&gpio->chip)) + dev_err(&pdev->dev, "failed to remove gpio chip\n"); err_no_chip: err_no_domain: err_no_port: diff --git a/drivers/pinctrl/pinctrl-sunxi.c b/drivers/pinctrl/pinctrl-sunxi.c index c52fc2c..c058529 100644 --- a/drivers/pinctrl/pinctrl-sunxi.c +++ b/drivers/pinctrl/pinctrl-sunxi.c @@ -2000,7 +2000,8 @@ static int sunxi_pinctrl_probe(struct platform_device *pdev) return 0; gpiochip_error: - ret = gpiochip_remove(pctl->chip); + if (gpiochip_remove(pctl->chip)) + dev_err(&pdev->dev, "failed to remove gpio chip\n"); pinctrl_error: pinctrl_unregister(pctl->pctl_dev); return ret; diff --git a/drivers/pinctrl/vt8500/pinctrl-wmt.c b/drivers/pinctrl/vt8500/pinctrl-wmt.c index ab63104..70d986e 100644 --- a/drivers/pinctrl/vt8500/pinctrl-wmt.c +++ b/drivers/pinctrl/vt8500/pinctrl-wmt.c @@ -609,8 +609,7 @@ int wmt_pinctrl_probe(struct platform_device *pdev, return 0; fail_range: - err = gpiochip_remove(&data->gpio_chip); - if (err) + if (gpiochip_remove(&data->gpio_chip)) dev_err(&pdev->dev, "failed to remove gpio chip\n"); fail_gpio: pinctrl_unregister(data->pctl_dev); -- cgit v0.10.2 From 21c219933fd123d4cdfc8853f51c41330b9d6c28 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Fri, 17 May 2013 18:24:30 +0200 Subject: pinctrl: samsung: Add support for SoC-specific suspend/resume callbacks SoC-specific driver might require additional save and restore of registers. This patch adds pair of SoC-specific callbacks per pinctrl device to account for this. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Tested-by: Doug Anderson Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index 15db258..63ac22e 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -1010,6 +1010,9 @@ static void samsung_pinctrl_suspend_dev( reg, bank->pm_save[PINCFG_TYPE_FUNC]); } } + + if (ctrl->suspend) + ctrl->suspend(drvdata); } /** @@ -1026,6 +1029,9 @@ static void samsung_pinctrl_resume_dev(struct samsung_pinctrl_drv_data *drvdata) void __iomem *virt_base = drvdata->virt_base; int i; + if (ctrl->resume) + ctrl->resume(drvdata); + for (i = 0; i < ctrl->nr_banks; i++) { struct samsung_pin_bank *bank = &ctrl->pin_banks[i]; void __iomem *reg = virt_base + bank->pctl_offset; diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h index 9f5cc81..b316d9f 100644 --- a/drivers/pinctrl/pinctrl-samsung.h +++ b/drivers/pinctrl/pinctrl-samsung.h @@ -187,6 +187,9 @@ struct samsung_pin_ctrl { int (*eint_gpio_init)(struct samsung_pinctrl_drv_data *); int (*eint_wkup_init)(struct samsung_pinctrl_drv_data *); + void (*suspend)(struct samsung_pinctrl_drv_data *); + void (*resume)(struct samsung_pinctrl_drv_data *); + char *label; }; -- cgit v0.10.2 From 3385474c3a2f5e81df67cba426c29beefd8a5c18 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Fri, 17 May 2013 18:24:31 +0200 Subject: pinctrl: samsung: Allow per-bank SoC-specific private data This patch extends pin bank descriptor structure with SoC-specific private data field that allows SoC-specific drivers to store their own private data. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Tested-by: Doug Anderson Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h index b316d9f..26d3519 100644 --- a/drivers/pinctrl/pinctrl-samsung.h +++ b/drivers/pinctrl/pinctrl-samsung.h @@ -139,6 +139,7 @@ struct samsung_pin_bank { u32 eint_mask; u32 eint_offset; char *name; + void *soc_priv; struct device_node *of_node; struct samsung_pinctrl_drv_data *drvdata; struct irq_domain *irq_domain; -- cgit v0.10.2 From 7ccbc60cd9c293304829662b043f4356f554fc3a Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Wed, 22 May 2013 16:03:17 +0200 Subject: pinctrl: exynos: Handle suspend/resume of GPIO EINT registers Some GPIO EINT control registers needs to be preserved across suspend/resume cycle. This patch extends the driver to take care of this. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c index 4f868e5..2d76f66 100644 --- a/drivers/pinctrl/pinctrl-exynos.c +++ b/drivers/pinctrl/pinctrl-exynos.c @@ -196,6 +196,12 @@ static irqreturn_t exynos_eint_gpio_irq(int irq, void *data) return IRQ_HANDLED; } +struct exynos_eint_gpio_save { + u32 eint_con; + u32 eint_fltcon0; + u32 eint_fltcon1; +}; + /* * exynos_eint_gpio_init() - setup handling of external gpio interrupts. * @d: driver data of samsung pinctrl driver. @@ -204,8 +210,8 @@ static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d) { struct samsung_pin_bank *bank; struct device *dev = d->dev; - unsigned int ret; - unsigned int i; + int ret; + int i; if (!d->irq) { dev_err(dev, "irq number not available\n"); @@ -227,11 +233,29 @@ static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d) bank->nr_pins, &exynos_gpio_irqd_ops, bank); if (!bank->irq_domain) { dev_err(dev, "gpio irq domain add failed\n"); - return -ENXIO; + ret = -ENXIO; + goto err_domains; + } + + bank->soc_priv = devm_kzalloc(d->dev, + sizeof(struct exynos_eint_gpio_save), GFP_KERNEL); + if (!bank->soc_priv) { + irq_domain_remove(bank->irq_domain); + ret = -ENOMEM; + goto err_domains; } } return 0; + +err_domains: + for (--i, --bank; i >= 0; --i, --bank) { + if (bank->eint_type != EINT_TYPE_GPIO) + continue; + irq_domain_remove(bank->irq_domain); + } + + return ret; } static void exynos_wkup_irq_unmask(struct irq_data *irqd) @@ -528,6 +552,72 @@ static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d) return 0; } +static void exynos_pinctrl_suspend_bank( + struct samsung_pinctrl_drv_data *drvdata, + struct samsung_pin_bank *bank) +{ + struct exynos_eint_gpio_save *save = bank->soc_priv; + void __iomem *regs = drvdata->virt_base; + + save->eint_con = readl(regs + EXYNOS_GPIO_ECON_OFFSET + + bank->eint_offset); + save->eint_fltcon0 = readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET + + 2 * bank->eint_offset); + save->eint_fltcon1 = readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET + + 2 * bank->eint_offset + 4); + + pr_debug("%s: save con %#010x\n", bank->name, save->eint_con); + pr_debug("%s: save fltcon0 %#010x\n", bank->name, save->eint_fltcon0); + pr_debug("%s: save fltcon1 %#010x\n", bank->name, save->eint_fltcon1); +} + +static void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata) +{ + struct samsung_pin_ctrl *ctrl = drvdata->ctrl; + struct samsung_pin_bank *bank = ctrl->pin_banks; + int i; + + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) + if (bank->eint_type == EINT_TYPE_GPIO) + exynos_pinctrl_suspend_bank(drvdata, bank); +} + +static void exynos_pinctrl_resume_bank( + struct samsung_pinctrl_drv_data *drvdata, + struct samsung_pin_bank *bank) +{ + struct exynos_eint_gpio_save *save = bank->soc_priv; + void __iomem *regs = drvdata->virt_base; + + pr_debug("%s: con %#010x => %#010x\n", bank->name, + readl(regs + EXYNOS_GPIO_ECON_OFFSET + + bank->eint_offset), save->eint_con); + pr_debug("%s: fltcon0 %#010x => %#010x\n", bank->name, + readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET + + 2 * bank->eint_offset), save->eint_fltcon0); + pr_debug("%s: fltcon1 %#010x => %#010x\n", bank->name, + readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET + + 2 * bank->eint_offset + 4), save->eint_fltcon1); + + writel(save->eint_con, regs + EXYNOS_GPIO_ECON_OFFSET + + bank->eint_offset); + writel(save->eint_fltcon0, regs + EXYNOS_GPIO_EFLTCON_OFFSET + + 2 * bank->eint_offset); + writel(save->eint_fltcon1, regs + EXYNOS_GPIO_EFLTCON_OFFSET + + 2 * bank->eint_offset + 4); +} + +static void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata) +{ + struct samsung_pin_ctrl *ctrl = drvdata->ctrl; + struct samsung_pin_bank *bank = ctrl->pin_banks; + int i; + + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) + if (bank->eint_type == EINT_TYPE_GPIO) + exynos_pinctrl_resume_bank(drvdata, bank); +} + /* pin banks of exynos4210 pin-controller 0 */ static struct samsung_pin_bank exynos4210_pin_banks0[] = { EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), @@ -591,6 +681,8 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos4210-gpio-ctrl0", }, { /* pin-controller instance 1 data */ @@ -605,6 +697,8 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = { .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, .eint_wkup_init = exynos_eint_wkup_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos4210-gpio-ctrl1", }, { /* pin-controller instance 2 data */ @@ -686,6 +780,8 @@ struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos4x12-gpio-ctrl0", }, { /* pin-controller instance 1 data */ @@ -700,6 +796,8 @@ struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = { .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, .eint_wkup_init = exynos_eint_wkup_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos4x12-gpio-ctrl1", }, { /* pin-controller instance 2 data */ @@ -710,6 +808,8 @@ struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos4x12-gpio-ctrl2", }, { /* pin-controller instance 3 data */ @@ -720,6 +820,8 @@ struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos4x12-gpio-ctrl3", }, }; @@ -798,6 +900,8 @@ struct samsung_pin_ctrl exynos5250_pin_ctrl[] = { .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, .eint_wkup_init = exynos_eint_wkup_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos5250-gpio-ctrl0", }, { /* pin-controller instance 1 data */ @@ -808,6 +912,8 @@ struct samsung_pin_ctrl exynos5250_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos5250-gpio-ctrl1", }, { /* pin-controller instance 2 data */ @@ -818,6 +924,8 @@ struct samsung_pin_ctrl exynos5250_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos5250-gpio-ctrl2", }, { /* pin-controller instance 3 data */ @@ -828,6 +936,8 @@ struct samsung_pin_ctrl exynos5250_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos5250-gpio-ctrl3", }, }; diff --git a/drivers/pinctrl/pinctrl-exynos.h b/drivers/pinctrl/pinctrl-exynos.h index 9b1f77a..3c91c35 100644 --- a/drivers/pinctrl/pinctrl-exynos.h +++ b/drivers/pinctrl/pinctrl-exynos.h @@ -19,6 +19,7 @@ /* External GPIO and wakeup interrupt related definitions */ #define EXYNOS_GPIO_ECON_OFFSET 0x700 +#define EXYNOS_GPIO_EFLTCON_OFFSET 0x800 #define EXYNOS_GPIO_EMASK_OFFSET 0x900 #define EXYNOS_GPIO_EPEND_OFFSET 0xA00 #define EXYNOS_WKUP_ECON_OFFSET 0xE00 -- cgit v0.10.2 From d72f88a42bf9761e3a92e58879d25a65712ca87a Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 23 May 2013 17:32:14 +0800 Subject: pinctrl: sunxi: fix error return code in sunxi_pinctrl_probe() Fix to return a negative error code from the devm_clk_get() error handling case instead of 0, as done elsewhere in this function. Introduced by commit 950707c0eb5c7aeaa2c446a04c824f4be686d2f6 (pinctrl: sunxi: add clock support) Signed-off-by: Wei Yongjun Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-sunxi.c b/drivers/pinctrl/pinctrl-sunxi.c index c058529..b7d8c89 100644 --- a/drivers/pinctrl/pinctrl-sunxi.c +++ b/drivers/pinctrl/pinctrl-sunxi.c @@ -1990,8 +1990,10 @@ static int sunxi_pinctrl_probe(struct platform_device *pdev) } clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(clk)) + if (IS_ERR(clk)) { + ret = PTR_ERR(clk); goto gpiochip_error; + } clk_prepare_enable(clk); -- cgit v0.10.2 From a386267a2ceea33d76fa2b7f1c2e72a858fcb68e Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 27 May 2013 15:53:32 +0200 Subject: pinctrl: pinconf: take the right mutex The pinconf_dgb_config_print() takes the per-pincontroller mutex, when what it wants to take is actually the pin maps mutex. Reported-by: James Hogan Cc: Patrice Chotard Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c index c67c37e..694c3ac 100644 --- a/drivers/pinctrl/pinconf.c +++ b/drivers/pinctrl/pinconf.c @@ -610,7 +610,7 @@ static int pinconf_dbg_config_print(struct seq_file *s, void *d) bool found = false; unsigned long config; - mutex_lock(&pctldev->mutex); + mutex_lock(&pinctrl_maps_mutex); /* Parse the pinctrl map and look for the elected pin/state */ for_each_maps(maps_node, i, map) { @@ -659,7 +659,7 @@ static int pinconf_dbg_config_print(struct seq_file *s, void *d) confops->pin_config_config_dbg_show(pctldev, s, config); exit: - mutex_unlock(&pctldev->mutex); + mutex_unlock(&pinctrl_maps_mutex); return 0; } -- cgit v0.10.2 From 9ecb41bd8cf002fd8f3e063db4df81647ddd623c Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Mon, 27 May 2013 16:03:40 +0200 Subject: dmaengine: ste_dma40: fix pm runtime ref counting The pm runtime reference counting of the driver is broken for the case when there is more than one transfer queued, leading to the device being runtime suspend while active. Fix it. Signed-off-by: Rabin Vincent Acked-by: Linus Walleij Cc: stable@vger.kernel.org Signed-off-by: Vinod Koul diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 1734fee..71bf4ec 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -1566,10 +1566,12 @@ static void dma_tc_handle(struct d40_chan *d40c) return; } - if (d40_queue_start(d40c) == NULL) + if (d40_queue_start(d40c) == NULL) { d40c->busy = false; - pm_runtime_mark_last_busy(d40c->base->dev); - pm_runtime_put_autosuspend(d40c->base->dev); + + pm_runtime_mark_last_busy(d40c->base->dev); + pm_runtime_put_autosuspend(d40c->base->dev); + } d40_desc_remove(d40d); d40_desc_done(d40c, d40d); -- cgit v0.10.2 From de614e561b9c633073caae8f86399aa8923ef85d Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Tue, 21 May 2013 17:09:41 +0300 Subject: crypto: sha256_ssse3 - fix stack corruption with SSSE3 and AVX implementations The _XFER stack element size was set too small, 8 bytes, when it needs to be 16 bytes. As _XFER is the last stack element used by these implementations, the 16 byte stores with 'movdqa' corrupt the stack where the value of register %r12 is temporarily stored. As these implementations align the stack pointer to 16 bytes, this corruption did not happen every time. Patch corrects this issue. Reported-by: Julian Wollrath Signed-off-by: Jussi Kivilinna Tested-by: Julian Wollrath Acked-by: Tim Chen Signed-off-by: Herbert Xu diff --git a/arch/x86/crypto/sha256-avx-asm.S b/arch/x86/crypto/sha256-avx-asm.S index 56610c4..642f156 100644 --- a/arch/x86/crypto/sha256-avx-asm.S +++ b/arch/x86/crypto/sha256-avx-asm.S @@ -118,7 +118,7 @@ y2 = %r15d _INP_END_SIZE = 8 _INP_SIZE = 8 -_XFER_SIZE = 8 +_XFER_SIZE = 16 _XMM_SAVE_SIZE = 0 _INP_END = 0 diff --git a/arch/x86/crypto/sha256-ssse3-asm.S b/arch/x86/crypto/sha256-ssse3-asm.S index 98d3c39..f833b74 100644 --- a/arch/x86/crypto/sha256-ssse3-asm.S +++ b/arch/x86/crypto/sha256-ssse3-asm.S @@ -111,7 +111,7 @@ y2 = %r15d _INP_END_SIZE = 8 _INP_SIZE = 8 -_XFER_SIZE = 8 +_XFER_SIZE = 16 _XMM_SAVE_SIZE = 0 _INP_END = 0 -- cgit v0.10.2 From 9a9c56cb34e65000d1f0a4b7553399bfcf7c5a52 Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Sun, 26 May 2013 21:31:28 +0000 Subject: net: phy: fix a bug when verify the EEE support The phy_init_eee has to exit with an error when the local device and its link partner both do not support EEE. So this patch fixes a problem when verify this. Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index c14f147..38f0b31 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -1044,7 +1044,7 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable) adv = mmd_eee_adv_to_ethtool_adv_t(eee_adv); lp = mmd_eee_adv_to_ethtool_adv_t(eee_lp); idx = phy_find_setting(phydev->speed, phydev->duplex); - if ((lp & adv & settings[idx].setting)) + if (!(lp & adv & settings[idx].setting)) goto eee_exit; if (clk_stop_enable) { -- cgit v0.10.2 From f96ef988cc603487c03a6de07807b06cbe641829 Mon Sep 17 00:00:00 2001 From: Michal Kubecek Date: Tue, 28 May 2013 08:26:49 +0200 Subject: ipv4: fix redirect handling for TCP packets Unlike ipv4_redirect() and ipv4_sk_redirect(), ip_do_redirect() doesn't call __build_flow_key() directly but via ip_rt_build_flow_key() wrapper. This leads to __build_flow_key() getting pointer to IPv4 header of the ICMP redirect packet rather than pointer to the embedded IPv4 header of the packet initiating the redirect. As a result, handling of ICMP redirects initiated by TCP packets is broken. Issue was introduced by 4895c771c ("ipv4: Add FIB nexthop exceptions.") Signed-off-by: Michal Kubecek Signed-off-by: David S. Miller diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 550781a..d35bbf0 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -737,10 +737,15 @@ static void ip_do_redirect(struct dst_entry *dst, struct sock *sk, struct sk_buf { struct rtable *rt; struct flowi4 fl4; + const struct iphdr *iph = (const struct iphdr *) skb->data; + int oif = skb->dev->ifindex; + u8 tos = RT_TOS(iph->tos); + u8 prot = iph->protocol; + u32 mark = skb->mark; rt = (struct rtable *) dst; - ip_rt_build_flow_key(&fl4, sk, skb); + __build_flow_key(&fl4, sk, iph, oif, tos, prot, mark, 0); __ip_do_redirect(rt, skb, &fl4, true); } -- cgit v0.10.2 From c89b65e7fffef745bdd36c372aa0dea778fecbab Mon Sep 17 00:00:00 2001 From: Andrew Jones Date: Mon, 27 May 2013 15:58:04 +0200 Subject: qxl: fix Kconfig deps - select FB_DEFERRED_IO Signed-off-by: Andrew Jones Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/qxl/Kconfig b/drivers/gpu/drm/qxl/Kconfig index 2f1a57e..d6c1279 100644 --- a/drivers/gpu/drm/qxl/Kconfig +++ b/drivers/gpu/drm/qxl/Kconfig @@ -4,6 +4,7 @@ config DRM_QXL select FB_SYS_FILLRECT select FB_SYS_COPYAREA select FB_SYS_IMAGEBLIT + select FB_DEFERRED_IO select DRM_KMS_HELPER select DRM_TTM help -- cgit v0.10.2 From 2938d2757fc99c26aa678ce4eba910c4a77c3a55 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 28 May 2013 09:33:01 +0200 Subject: tick: Cure broadcast false positive pending bit warning commit 26517f3e (tick: Avoid programming the local cpu timer if broadcast pending) added a warning if the cpu enters broadcast mode again while the pending bit is still set. Meelis reported that the warning triggers. There are two corner cases which have been not considered: 1) cpuidle calls clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER) twice. That can result in the following scenario CPU0 CPU1 cpuidle_idle_call() clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER) set cpu in tick_broadcast_oneshot_mask broadcast interrupt event expired for cpu1 set pending bit acpi_idle_enter_simple() clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER) WARN_ON(pending bit) Move the WARN_ON into the section where we enter broadcast mode so it wont provide false positives on the second call. 2) safe_halt() enables interrupts, so a broadcast interrupt can be delivered befor the broadcast mode is disabled. That sets the pending bit for the CPU which receives the broadcast interrupt. Though the interrupt is delivered right away from the broadcast handler and leaves the pending bit stale. Clear the pending bit for the current cpu in the broadcast handler. Reported-and-tested-by: Meelis Roos Cc: Len Brown Cc: Frederic Weisbecker Cc: Borislav Petkov Cc: Rafael J. Wysocki Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1305271841130.4220@ionos Signed-off-by: Thomas Gleixner diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index 24938d5..0c73942 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -511,6 +511,12 @@ again: } } + /* + * Remove the current cpu from the pending mask. The event is + * delivered immediately in tick_do_broadcast() ! + */ + cpumask_clear_cpu(smp_processor_id(), tick_broadcast_pending_mask); + /* Take care of enforced broadcast requests */ cpumask_or(tmpmask, tmpmask, tick_broadcast_force_mask); cpumask_clear(tick_broadcast_force_mask); @@ -575,8 +581,8 @@ void tick_broadcast_oneshot_control(unsigned long reason) raw_spin_lock_irqsave(&tick_broadcast_lock, flags); if (reason == CLOCK_EVT_NOTIFY_BROADCAST_ENTER) { - WARN_ON_ONCE(cpumask_test_cpu(cpu, tick_broadcast_pending_mask)); if (!cpumask_test_and_set_cpu(cpu, tick_broadcast_oneshot_mask)) { + WARN_ON_ONCE(cpumask_test_cpu(cpu, tick_broadcast_pending_mask)); clockevents_set_mode(dev, CLOCK_EVT_MODE_SHUTDOWN); /* * We only reprogram the broadcast timer if we -- cgit v0.10.2 From 37c14e83ee173cc3f6310d80f00f2e588c402b61 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 28 May 2013 10:22:06 +0200 Subject: m68k: Update defconfigs for v3.9 Signed-off-by: Geert Uytterhoeven diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig index 90d3109..19325e1 100644 --- a/arch/m68k/configs/amiga_defconfig +++ b/arch/m68k/configs/amiga_defconfig @@ -1,55 +1,78 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-amiga" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_AMIGA=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68020=y CONFIG_M68030=y CONFIG_M68040=y CONFIG_M68060=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m +CONFIG_AMIGA=y CONFIG_ZORRO=y CONFIG_AMIGA_PCMCIA=y -CONFIG_HEARTBEAT=y -CONFIG_PROC_HARDWARE=y CONFIG_ZORRO_NAMES=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -57,25 +80,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -86,6 +121,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -99,22 +136,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -124,7 +170,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -133,18 +178,30 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_PARPORT=m CONFIG_PARPORT_AMIGA=m @@ -154,11 +211,13 @@ CONFIG_AMIGA_FLOPPY=y CONFIG_AMIGA_Z2RAM=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m CONFIG_IDE=y +CONFIG_IDE_GD_ATAPI=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_GAYLE=y CONFIG_BLK_DEV_BUDDHA=y @@ -172,57 +231,77 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_A3000_SCSI=y CONFIG_A2091_SCSI=y CONFIG_GVP11_SCSI=y CONFIG_SCSI_A4000T=y CONFIG_SCSI_ZORRO7XX=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y -CONFIG_ARIADNE=y +# CONFIG_NET_VENDOR_3COM is not set CONFIG_A2065=y +CONFIG_ARIADNE=y +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FUJITSU is not set +# CONFIG_NET_VENDOR_HP is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set CONFIG_HYDRA=y -CONFIG_ZORRO8390=y CONFIG_APNE=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +CONFIG_ZORRO8390=y +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m CONFIG_KEYBOARD_AMIGA=y # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_MOUSE_PS2 is not set @@ -233,11 +312,14 @@ CONFIG_INPUT_MISC=y CONFIG_INPUT_M68K_BEEP=m # CONFIG_SERIO is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_PRINTER=m # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PPS_CLIENT_PARPORT=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_CIRRUS=y @@ -252,48 +334,64 @@ CONFIG_SOUND=m CONFIG_DMASOUND_PAULA=m CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_MSM6242=m +CONFIG_RTC_DRV_RP5C01=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_HEARTBEAT=y +CONFIG_PROC_HARDWARE=y CONFIG_AMIGA_BUILTIN_SERIAL=y CONFIG_SERIAL_CONSOLE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -332,10 +430,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -345,19 +456,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -373,6 +481,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig index 8f4f657..14dc6cc 100644 --- a/arch/m68k/configs/apollo_defconfig +++ b/arch/m68k/configs/apollo_defconfig @@ -1,55 +1,76 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-apollo" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_APOLLO=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68020=y CONFIG_M68030=y CONFIG_M68040=y CONFIG_M68060=y +CONFIG_APOLLO=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_HEARTBEAT=y -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -57,25 +78,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -86,6 +119,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -99,22 +134,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -124,7 +168,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -133,21 +176,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -162,57 +218,74 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=m CONFIG_SERIO=m -# CONFIG_SERIO_SERPORT is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FRAMEBUFFER_CONSOLE=y @@ -221,47 +294,61 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_HEARTBEAT=y +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -300,10 +387,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -313,19 +413,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -341,6 +438,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig index 4571d33..6d5370c 100644 --- a/arch/m68k/configs/atari_defconfig +++ b/arch/m68k/configs/atari_defconfig @@ -1,53 +1,75 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-atari" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_ATARI=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68020=y CONFIG_M68030=y CONFIG_M68040=y CONFIG_M68060=y +CONFIG_ATARI=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_STRAM_PROC=y -CONFIG_HEARTBEAT=y -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -55,25 +77,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -84,6 +118,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -97,22 +133,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -122,7 +167,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -131,18 +175,30 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_PARPORT=m CONFIG_PARPORT_ATARI=m @@ -150,11 +206,13 @@ CONFIG_PARPORT_1284=y CONFIG_ATARI_FLOPPY=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m CONFIG_IDE=y +CONFIG_IDE_GD_ATAPI=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_FALCON_IDE=y CONFIG_RAID_ATTRS=m @@ -167,63 +225,81 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_ATARI_SCSI=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m -CONFIG_VETH=m -CONFIG_NET_ETHERNET=y CONFIG_MII=y +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_VETH=m CONFIG_ATARILANCE=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m CONFIG_KEYBOARD_ATARI=y # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_ATARI=m CONFIG_INPUT_MISC=y CONFIG_INPUT_M68K_BEEP=m -# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_PRINTER=m # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PPS_CLIENT_PARPORT=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_ATARI=y @@ -233,47 +309,64 @@ CONFIG_SOUND=m CONFIG_DMASOUND_ATARI=m CONFIG_HID=m CONFIG_HIDRAW=y -# CONFIG_USB_SUPPORT is not set +CONFIG_UHID=m +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_HEARTBEAT=y +CONFIG_PROC_HARDWARE=y +CONFIG_NATFEAT=y +CONFIG_NFBLOCK=y +CONFIG_NFCON=y +CONFIG_NFETH=y CONFIG_ATARI_DSP56K=m CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -312,10 +405,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -325,19 +431,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -353,6 +456,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=y CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig index 12f2117..c015ddb 100644 --- a/arch/m68k/configs/bvme6000_defconfig +++ b/arch/m68k/configs/bvme6000_defconfig @@ -1,53 +1,74 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-bvme6000" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_VME=y -CONFIG_BVME6000=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68040=y CONFIG_M68060=y +CONFIG_VME=y +CONFIG_BVME6000=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -55,25 +76,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -84,6 +117,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -97,22 +132,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -122,7 +166,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -131,21 +174,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -160,103 +216,131 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_BVME6000_SCSI=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set CONFIG_BVME6000_NET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_SERIAL=m -CONFIG_SERIO=m -# CONFIG_SERIO_SERPORT is not set +# CONFIG_MOUSE_PS2 is not set +# CONFIG_SERIO is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -295,10 +379,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -308,19 +405,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -336,7 +430,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y -CONFIG_CRC32=m +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig index 215389a..ec7382d 100644 --- a/arch/m68k/configs/hp300_defconfig +++ b/arch/m68k/configs/hp300_defconfig @@ -1,54 +1,76 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-hp300" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_HP300=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68020=y CONFIG_M68030=y CONFIG_M68040=y CONFIG_M68060=y +CONFIG_HP300=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -56,25 +78,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -85,6 +119,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -98,22 +134,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -123,7 +168,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -132,21 +176,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -161,59 +218,77 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y CONFIG_HPLANCE=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=m CONFIG_INPUT_MISC=y CONFIG_HP_SDC_RTC=m -# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_SERPORT=m CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FRAMEBUFFER_CONSOLE=y @@ -222,47 +297,60 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -301,10 +389,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -314,19 +415,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -342,6 +440,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig index cb9dfb3..7d46fbe 100644 --- a/arch/m68k/configs/mac_defconfig +++ b/arch/m68k/configs/mac_defconfig @@ -1,49 +1,75 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-mac" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_MAC=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68020=y CONFIG_M68030=y CONFIG_M68040=y +CONFIG_M68KFPU_EMU=y +CONFIG_MAC=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -51,25 +77,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -80,6 +118,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -93,22 +133,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -118,7 +167,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -127,31 +175,45 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m CONFIG_DEV_APPLETALK=m CONFIG_IPDDP=m CONFIG_IPDDP_ENCAP=y CONFIG_IPDDP_DECAP=y +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m -CONFIG_BLK_DEV_SWIM=y +CONFIG_BLK_DEV_SWIM=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m CONFIG_IDE=y +CONFIG_IDE_GD_ATAPI=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_MAC_IDE=y CONFIG_RAID_ATTRS=m @@ -164,29 +226,30 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_MAC_SCSI=y CONFIG_SCSI_MAC_ESP=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_ADB=y CONFIG_ADB_MACII=y -CONFIG_ADB_MACIISI=y CONFIG_ADB_IOP=y CONFIG_ADB_PMU68K=y CONFIG_ADB_CUDA=y @@ -194,46 +257,61 @@ CONFIG_INPUT_ADBHID=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y -CONFIG_MAC8390=y -CONFIG_MAC89x0=m -CONFIG_MACSONIC=m CONFIG_MACMACE=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +CONFIG_MAC89x0=y +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +CONFIG_MACSONIC=y +CONFIG_MAC8390=y +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=m CONFIG_INPUT_MISC=y CONFIG_INPUT_M68K_BEEP=m CONFIG_SERIO=m -# CONFIG_SERIO_SERPORT is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_SERIAL_PMACZILOG=y CONFIG_SERIAL_PMACZILOG_TTYS=y CONFIG_SERIAL_PMACZILOG_CONSOLE=y # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_VALKYRIE=y @@ -242,46 +320,60 @@ CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m -CONFIG_HFS_FS=y -CONFIG_HFSPLUS_FS=y +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y +CONFIG_NFS_FS=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -320,10 +412,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -333,19 +438,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -361,6 +463,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig index 8d5def4..0f795d8 100644 --- a/arch/m68k/configs/multi_defconfig +++ b/arch/m68k/configs/multi_defconfig @@ -1,15 +1,29 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-multi" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_EFI_PARTITION is not set +CONFIG_IOSCHED_DEADLINE=m +CONFIG_M68020=y +CONFIG_M68040=y +CONFIG_M68060=y +CONFIG_M68KFPU_EMU=y CONFIG_AMIGA=y CONFIG_ATARI=y CONFIG_MAC=y @@ -21,48 +35,50 @@ CONFIG_BVME6000=y CONFIG_HP300=y CONFIG_SUN3X=y CONFIG_Q40=y -CONFIG_M68020=y -CONFIG_M68040=y -CONFIG_M68060=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m CONFIG_ZORRO=y CONFIG_AMIGA_PCMCIA=y -CONFIG_STRAM_PROC=y -CONFIG_HEARTBEAT=y -CONFIG_PROC_HARDWARE=y CONFIG_ZORRO_NAMES=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -70,25 +86,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -99,6 +127,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -112,22 +142,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -137,7 +176,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -146,22 +184,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m CONFIG_DEV_APPLETALK=m CONFIG_IPDDP=m CONFIG_IPDDP_ENCAP=y CONFIG_IPDDP_DECAP=y +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_PARPORT=m CONFIG_PARPORT_AMIGA=m @@ -170,15 +220,17 @@ CONFIG_PARPORT_ATARI=m CONFIG_PARPORT_1284=y CONFIG_AMIGA_FLOPPY=y CONFIG_ATARI_FLOPPY=y -CONFIG_BLK_DEV_SWIM=y +CONFIG_BLK_DEV_SWIM=m CONFIG_AMIGA_Z2RAM=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m CONFIG_IDE=y +CONFIG_IDE_GD_ATAPI=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_GAYLE=y CONFIG_BLK_DEV_BUDDHA=y @@ -195,11 +247,9 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_A3000_SCSI=y CONFIG_A2091_SCSI=y CONFIG_GVP11_SCSI=y @@ -213,21 +263,24 @@ CONFIG_MVME16x_SCSI=y CONFIG_BVME6000_SCSI=y CONFIG_SUN3X_ESP=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_ADB=y CONFIG_ADB_MACII=y -CONFIG_ADB_MACIISI=y CONFIG_ADB_IOP=y CONFIG_ADB_PMU68K=y CONFIG_ADB_CUDA=y @@ -235,49 +288,64 @@ CONFIG_INPUT_ADBHID=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m -CONFIG_VETH=m -CONFIG_NET_ETHERNET=y CONFIG_MII=y -CONFIG_ARIADNE=y +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_VETH=m +# CONFIG_NET_VENDOR_3COM is not set CONFIG_A2065=y -CONFIG_HYDRA=y -CONFIG_ZORRO8390=y -CONFIG_APNE=y -CONFIG_MAC8390=y -CONFIG_MAC89x0=y -CONFIG_MACSONIC=y -CONFIG_MACMACE=y -CONFIG_MVME147_NET=y -CONFIG_MVME16x_NET=y -CONFIG_BVME6000_NET=y +CONFIG_ARIADNE=y CONFIG_ATARILANCE=y -CONFIG_SUN3LANCE=y CONFIG_HPLANCE=y +CONFIG_MVME147_NET=y +CONFIG_SUN3LANCE=y +CONFIG_MACMACE=y +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +CONFIG_MAC89x0=y +# CONFIG_NET_VENDOR_FUJITSU is not set +# CONFIG_NET_VENDOR_HP is not set +CONFIG_BVME6000_NET=y +CONFIG_MVME16x_NET=y +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +CONFIG_MACSONIC=y +CONFIG_HYDRA=y +CONFIG_MAC8390=y CONFIG_NE2000=m -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +CONFIG_APNE=y +CONFIG_ZORRO8390=y +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m CONFIG_KEYBOARD_AMIGA=y CONFIG_KEYBOARD_ATARI=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_SUNKBD=y -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=m CONFIG_MOUSE_AMIGA=m CONFIG_MOUSE_ATARI=m @@ -285,18 +353,20 @@ CONFIG_INPUT_JOYSTICK=y CONFIG_JOYSTICK_AMIGA=m CONFIG_INPUT_MISC=y CONFIG_INPUT_M68K_BEEP=m -CONFIG_HP_SDC_RTC=y -# CONFIG_SERIO_SERPORT is not set +CONFIG_HP_SDC_RTC=m CONFIG_SERIO_Q40KBD=y CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_SERIAL_PMACZILOG=y CONFIG_SERIAL_PMACZILOG_TTYS=y CONFIG_SERIAL_PMACZILOG_CONSOLE=y CONFIG_PRINTER=m # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=y -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PPS_CLIENT_PARPORT=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_CIRRUS=y @@ -316,7 +386,20 @@ CONFIG_DMASOUND_PAULA=m CONFIG_DMASOUND_Q40=m CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_MSM6242=m +CONFIG_RTC_DRV_RP5C01=m +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_HEARTBEAT=y +CONFIG_PROC_HARDWARE=y +CONFIG_NATFEAT=y +CONFIG_NFBLOCK=y +CONFIG_NFCON=y +CONFIG_NFETH=y CONFIG_ATARI_DSP56K=m CONFIG_AMIGA_BUILTIN_SERIAL=y CONFIG_SERIAL_CONSOLE=y @@ -324,42 +407,49 @@ CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m -CONFIG_HFS_FS=y -CONFIG_HFSPLUS_FS=y +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -398,10 +488,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -411,19 +514,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -439,6 +539,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=y CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig index e2af46f..5586c65 100644 --- a/arch/m68k/configs/mvme147_defconfig +++ b/arch/m68k/configs/mvme147_defconfig @@ -1,52 +1,73 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-mvme147" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_IOSCHED_DEADLINE=m +CONFIG_M68030=y CONFIG_VME=y CONFIG_MVME147=y -CONFIG_M68030=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -54,25 +75,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -83,6 +116,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -96,22 +131,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -121,7 +165,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -130,21 +173,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -159,103 +215,132 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_MVME147_SCSI=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y CONFIG_MVME147_NET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_SERIAL=m -CONFIG_SERIO=m -# CONFIG_SERIO_SERPORT is not set +# CONFIG_MOUSE_PS2 is not set +# CONFIG_SERIO is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -294,10 +379,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -307,19 +405,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -335,6 +430,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig index 7c9402b..e5e8262 100644 --- a/arch/m68k/configs/mvme16x_defconfig +++ b/arch/m68k/configs/mvme16x_defconfig @@ -1,53 +1,74 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-mvme16x" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_VME=y -CONFIG_MVME16x=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68040=y CONFIG_M68060=y +CONFIG_VME=y +CONFIG_MVME16x=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -55,25 +76,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -84,6 +117,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -97,22 +132,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -122,7 +166,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -131,21 +174,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -160,103 +216,131 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_MVME16x_SCSI=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set CONFIG_MVME16x_NET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_SERIAL=m -CONFIG_SERIO=m -# CONFIG_SERIO_SERPORT is not set +# CONFIG_MOUSE_PS2 is not set +# CONFIG_SERIO is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -295,10 +379,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -308,19 +405,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -336,6 +430,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig index 19d23db..8982370 100644 --- a/arch/m68k/configs/q40_defconfig +++ b/arch/m68k/configs/q40_defconfig @@ -1,49 +1,74 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-q40" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_Q40=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68040=y CONFIG_M68060=y +CONFIG_Q40=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_HEARTBEAT=y -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -51,25 +76,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -80,6 +117,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -93,22 +132,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -118,7 +166,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -127,26 +174,40 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m CONFIG_IDE=y +CONFIG_IDE_GD_ATAPI=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_Q40IDE=y CONFIG_RAID_ATTRS=m @@ -159,61 +220,82 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_AMD is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FUJITSU is not set +# CONFIG_NET_VENDOR_HP is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set CONFIG_NE2000=m -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=m CONFIG_INPUT_MISC=y CONFIG_INPUT_M68K_BEEP=m -CONFIG_SERIO=m -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIO_Q40KBD=m +CONFIG_SERIO_Q40KBD=y CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FRAMEBUFFER_CONSOLE=y @@ -222,46 +304,61 @@ CONFIG_SOUND=m CONFIG_DMASOUND_Q40=m CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_HEARTBEAT=y +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -300,10 +397,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -313,19 +423,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -341,6 +448,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig index ca6c0b4..54674d6 100644 --- a/arch/m68k/configs/sun3_defconfig +++ b/arch/m68k/configs/sun3_defconfig @@ -1,50 +1,71 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-sun3" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_SUN3=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -52,25 +73,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -81,6 +114,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -94,22 +129,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -119,7 +163,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -128,21 +171,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -157,107 +213,136 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_SUN3_SCSI=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y CONFIG_SUN3LANCE=y +# CONFIG_NET_CADENCE is not set CONFIG_SUN3_82586=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_SUN is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_SUNKBD=y -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=m -# CONFIG_SERIO_SERPORT is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -296,10 +381,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -309,19 +407,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -337,6 +432,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig index c80941c..832d953 100644 --- a/arch/m68k/configs/sun3x_defconfig +++ b/arch/m68k/configs/sun3x_defconfig @@ -1,50 +1,71 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-sun3x" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_SUN3X=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -52,25 +73,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -81,6 +114,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -94,22 +129,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -119,7 +163,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -128,21 +171,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -157,106 +213,136 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_SUN3X_ESP=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y CONFIG_SUN3LANCE=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_SUNKBD=y -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=m -# CONFIG_SERIO_SERPORT is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -295,10 +381,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -308,19 +407,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -336,6 +432,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m -- cgit v0.10.2 From d5b4c2f4938aaebc392669111385c3cf50dd309f Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Mon, 27 May 2013 17:55:13 +0800 Subject: arch: s390: appldata: using strncpy() and strnlen() instead of sprintf() 'buf[2]' is 2 bytes length, and sprintf() will append '\0' at the end of string "?\n", so original implementation is memory overflow. Need use strncpy() and strnlen() instead of sprintf(). Signed-off-by: Chen Gang Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index bae0f40..87a2209 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -212,7 +212,9 @@ appldata_timer_handler(ctl_table *ctl, int write, return 0; } if (!write) { - len = sprintf(buf, appldata_timer_active ? "1\n" : "0\n"); + strncpy(buf, appldata_timer_active ? "1\n" : "0\n", + ARRAY_SIZE(buf)); + len = strnlen(buf, ARRAY_SIZE(buf)); if (len > *lenp) len = *lenp; if (copy_to_user(buffer, buf, len)) @@ -317,7 +319,8 @@ appldata_generic_handler(ctl_table *ctl, int write, return 0; } if (!write) { - len = sprintf(buf, ops->active ? "1\n" : "0\n"); + strncpy(buf, ops->active ? "1\n" : "0\n", ARRAY_SIZE(buf)); + len = strnlen(buf, ARRAY_SIZE(buf)); if (len > *lenp) len = *lenp; if (copy_to_user(buffer, buf, len)) { -- cgit v0.10.2 From 7b959fc582741227a1c4cba710d6aff8fb183128 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Wed, 22 May 2013 18:34:09 +0900 Subject: kprobes: Fix to free gone and unused optprobes Fix to free gone and unused optprobes. This bug will cause a kernel panic if the user reuses the killed and unused probe. Reported at: http://sourceware.org/ml/systemtap/2013-q2/msg00142.html In the normal path, an optprobe on an init function is unregistered when a module goes live. unregister_kprobe(kp) -> __unregister_kprobe_top ->__disable_kprobe ->disarm_kprobe(ap == op) ->__disarm_kprobe ->unoptimize_kprobe : the op is queued on unoptimizing_list and do nothing in __unregister_kprobe_bottom After a while (usually wait 5 jiffies), kprobe_optimizer runs to unoptimize and free optprobe. kprobe_optimizer ->do_unoptimize_kprobes ->arch_unoptimize_kprobes : moved to free_list ->do_free_cleaned_kprobes ->hlist_del: the op is removed ->free_aggr_kprobe ->arch_remove_optimized_kprobe ->arch_remove_kprobe ->kfree: the op is freed Here, if kprobes_module_callback is called and the delayed unoptimizing probe is picked BEFORE kprobe_optimizer runs, kprobes_module_callback ->kill_kprobe ->kill_optimized_kprobe : dequeued from unoptimizing_list <=!!! ->arch_remove_optimized_kprobe ->arch_remove_kprobe (but op is not freed, and on the kprobe hash table) This doesn't happen if the probe unregistration is done AFTER kprobes_module_callback is called (because at that time the op is gone), and kprobe-tracer does it. To fix this bug, this patch changes kprobes_module_callback to enqueue the op to freeing_list at kill_optimized_kprobe only if the op is unused. The unused probes on freeing_list will be freed in do_free_cleaned_kprobes. Note that this calls arch_remove_*kprobe twice on the same probe. Thus those functions have to check the double free. Fortunately, most of arch codes already checked that except for mips. This will be fixed in the next patch. Signed-off-by: Masami Hiramatsu Cc: Timo Juhani Lindfors Cc: Ananth N Mavinakayanahalli Cc: Anil S Keshavamurthy Cc: Frank Ch. Eigler Cc: systemtap@sourceware.org Cc: yrl.pp-manager.tt@hitachi.com Cc: David S. Miller Cc: "David S. Miller" Link: http://lkml.kernel.org/r/20130522093409.9084.63554.stgit@mhiramat-M0-7522 [ Minor edits. ] Signed-off-by: Ingo Molnar diff --git a/kernel/kprobes.c b/kernel/kprobes.c index 3fed7f0..bddf3b2 100644 --- a/kernel/kprobes.c +++ b/kernel/kprobes.c @@ -467,6 +467,7 @@ static struct kprobe *__kprobes get_optimized_kprobe(unsigned long addr) /* Optimization staging list, protected by kprobe_mutex */ static LIST_HEAD(optimizing_list); static LIST_HEAD(unoptimizing_list); +static LIST_HEAD(freeing_list); static void kprobe_optimizer(struct work_struct *work); static DECLARE_DELAYED_WORK(optimizing_work, kprobe_optimizer); @@ -504,7 +505,7 @@ static __kprobes void do_optimize_kprobes(void) * Unoptimize (replace a jump with a breakpoint and remove the breakpoint * if need) kprobes listed on unoptimizing_list. */ -static __kprobes void do_unoptimize_kprobes(struct list_head *free_list) +static __kprobes void do_unoptimize_kprobes(void) { struct optimized_kprobe *op, *tmp; @@ -515,9 +516,9 @@ static __kprobes void do_unoptimize_kprobes(struct list_head *free_list) /* Ditto to do_optimize_kprobes */ get_online_cpus(); mutex_lock(&text_mutex); - arch_unoptimize_kprobes(&unoptimizing_list, free_list); + arch_unoptimize_kprobes(&unoptimizing_list, &freeing_list); /* Loop free_list for disarming */ - list_for_each_entry_safe(op, tmp, free_list, list) { + list_for_each_entry_safe(op, tmp, &freeing_list, list) { /* Disarm probes if marked disabled */ if (kprobe_disabled(&op->kp)) arch_disarm_kprobe(&op->kp); @@ -536,11 +537,11 @@ static __kprobes void do_unoptimize_kprobes(struct list_head *free_list) } /* Reclaim all kprobes on the free_list */ -static __kprobes void do_free_cleaned_kprobes(struct list_head *free_list) +static __kprobes void do_free_cleaned_kprobes(void) { struct optimized_kprobe *op, *tmp; - list_for_each_entry_safe(op, tmp, free_list, list) { + list_for_each_entry_safe(op, tmp, &freeing_list, list) { BUG_ON(!kprobe_unused(&op->kp)); list_del_init(&op->list); free_aggr_kprobe(&op->kp); @@ -556,8 +557,6 @@ static __kprobes void kick_kprobe_optimizer(void) /* Kprobe jump optimizer */ static __kprobes void kprobe_optimizer(struct work_struct *work) { - LIST_HEAD(free_list); - mutex_lock(&kprobe_mutex); /* Lock modules while optimizing kprobes */ mutex_lock(&module_mutex); @@ -566,7 +565,7 @@ static __kprobes void kprobe_optimizer(struct work_struct *work) * Step 1: Unoptimize kprobes and collect cleaned (unused and disarmed) * kprobes before waiting for quiesence period. */ - do_unoptimize_kprobes(&free_list); + do_unoptimize_kprobes(); /* * Step 2: Wait for quiesence period to ensure all running interrupts @@ -581,7 +580,7 @@ static __kprobes void kprobe_optimizer(struct work_struct *work) do_optimize_kprobes(); /* Step 4: Free cleaned kprobes after quiesence period */ - do_free_cleaned_kprobes(&free_list); + do_free_cleaned_kprobes(); mutex_unlock(&module_mutex); mutex_unlock(&kprobe_mutex); @@ -723,8 +722,19 @@ static void __kprobes kill_optimized_kprobe(struct kprobe *p) if (!list_empty(&op->list)) /* Dequeue from the (un)optimization queue */ list_del_init(&op->list); - op->kp.flags &= ~KPROBE_FLAG_OPTIMIZED; + + if (kprobe_unused(p)) { + /* Enqueue if it is unused */ + list_add(&op->list, &freeing_list); + /* + * Remove unused probes from the hash list. After waiting + * for synchronization, this probe is reclaimed. + * (reclaiming is done by do_free_cleaned_kprobes().) + */ + hlist_del_rcu(&op->kp.hlist); + } + /* Don't touch the code, because it is already freed. */ arch_remove_optimized_kprobe(op); } -- cgit v0.10.2 From 26cb63ad11e04047a64309362674bcbbd6a6f246 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 28 May 2013 10:55:48 +0200 Subject: perf: Fix perf mmap bugs Vince reported a problem found by his perf specific trinity fuzzer. Al noticed 2 problems with perf's mmap(): - it has issues against fork() since we use vma->vm_mm for accounting. - it has an rb refcount leak on double mmap(). We fix the issues against fork() by using VM_DONTCOPY; I don't think there's code out there that uses this; we didn't hear about weird accounting problems/crashes. If we do need this to work, the previously proposed VM_PINNED could make this work. Aside from the rb reference leak spotted by Al, Vince's example prog was indeed doing a double mmap() through the use of perf_event_set_output(). This exposes another problem, since we now have 2 events with one buffer, the accounting gets screwy because we account per event. Fix this by making the buffer responsible for its own accounting. Reported-by: Vince Weaver Signed-off-by: Peter Zijlstra Cc: Al Viro Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Link: http://lkml.kernel.org/r/20130528085548.GA12193@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index f463a46..c5b6dbf 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -389,8 +389,7 @@ struct perf_event { /* mmap bits */ struct mutex mmap_mutex; atomic_t mmap_count; - int mmap_locked; - struct user_struct *mmap_user; + struct ring_buffer *rb; struct list_head rb_entry; diff --git a/kernel/events/core.c b/kernel/events/core.c index 9dc297f..ae752cd 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -2917,7 +2917,7 @@ static void free_event_rcu(struct rcu_head *head) kfree(event); } -static void ring_buffer_put(struct ring_buffer *rb); +static bool ring_buffer_put(struct ring_buffer *rb); static void free_event(struct perf_event *event) { @@ -3582,13 +3582,13 @@ static struct ring_buffer *ring_buffer_get(struct perf_event *event) return rb; } -static void ring_buffer_put(struct ring_buffer *rb) +static bool ring_buffer_put(struct ring_buffer *rb) { struct perf_event *event, *n; unsigned long flags; if (!atomic_dec_and_test(&rb->refcount)) - return; + return false; spin_lock_irqsave(&rb->event_lock, flags); list_for_each_entry_safe(event, n, &rb->event_list, rb_entry) { @@ -3598,6 +3598,7 @@ static void ring_buffer_put(struct ring_buffer *rb) spin_unlock_irqrestore(&rb->event_lock, flags); call_rcu(&rb->rcu_head, rb_free_rcu); + return true; } static void perf_mmap_open(struct vm_area_struct *vma) @@ -3612,18 +3613,20 @@ static void perf_mmap_close(struct vm_area_struct *vma) struct perf_event *event = vma->vm_file->private_data; if (atomic_dec_and_mutex_lock(&event->mmap_count, &event->mmap_mutex)) { - unsigned long size = perf_data_size(event->rb); - struct user_struct *user = event->mmap_user; struct ring_buffer *rb = event->rb; + struct user_struct *mmap_user = rb->mmap_user; + int mmap_locked = rb->mmap_locked; + unsigned long size = perf_data_size(rb); - atomic_long_sub((size >> PAGE_SHIFT) + 1, &user->locked_vm); - vma->vm_mm->pinned_vm -= event->mmap_locked; rcu_assign_pointer(event->rb, NULL); ring_buffer_detach(event, rb); mutex_unlock(&event->mmap_mutex); - ring_buffer_put(rb); - free_uid(user); + if (ring_buffer_put(rb)) { + atomic_long_sub((size >> PAGE_SHIFT) + 1, &mmap_user->locked_vm); + vma->vm_mm->pinned_vm -= mmap_locked; + free_uid(mmap_user); + } } } @@ -3676,9 +3679,7 @@ static int perf_mmap(struct file *file, struct vm_area_struct *vma) WARN_ON_ONCE(event->ctx->parent_ctx); mutex_lock(&event->mmap_mutex); if (event->rb) { - if (event->rb->nr_pages == nr_pages) - atomic_inc(&event->rb->refcount); - else + if (event->rb->nr_pages != nr_pages) ret = -EINVAL; goto unlock; } @@ -3720,12 +3721,14 @@ static int perf_mmap(struct file *file, struct vm_area_struct *vma) ret = -ENOMEM; goto unlock; } - rcu_assign_pointer(event->rb, rb); + + rb->mmap_locked = extra; + rb->mmap_user = get_current_user(); atomic_long_add(user_extra, &user->locked_vm); - event->mmap_locked = extra; - event->mmap_user = get_current_user(); - vma->vm_mm->pinned_vm += event->mmap_locked; + vma->vm_mm->pinned_vm += extra; + + rcu_assign_pointer(event->rb, rb); perf_event_update_userpage(event); @@ -3734,7 +3737,7 @@ unlock: atomic_inc(&event->mmap_count); mutex_unlock(&event->mmap_mutex); - vma->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP; + vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND | VM_DONTDUMP; vma->vm_ops = &perf_mmap_vmops; return ret; diff --git a/kernel/events/internal.h b/kernel/events/internal.h index eb675c4..5bc6c8e 100644 --- a/kernel/events/internal.h +++ b/kernel/events/internal.h @@ -31,6 +31,9 @@ struct ring_buffer { spinlock_t event_lock; struct list_head event_list; + int mmap_locked; + struct user_struct *mmap_user; + struct perf_event_mmap_page *user_page; void *data_pages[0]; }; -- cgit v0.10.2 From 15ef0298deb3929eb6ad6d2334fd2059fd53807c Mon Sep 17 00:00:00 2001 From: Pavel Tikhomirov Date: Fri, 17 May 2013 02:12:03 +0400 Subject: posix-timers: Show clock ID in proc file Expand information about posix-timers in /proc//timers by adding info about clock, with which the timer was created. I.e. in the forth line of timer info after "notify:" line go "ClockID: ". Signed-off-by: Pavel Tikhomirov Cc: Michael Kerrisk Cc: Matthew Helsley Cc: Pavel Emelyanov Link: http://lkml.kernel.org/r/1368742323-46949-2-git-send-email-snorcht@gmail.com Signed-off-by: Thomas Gleixner diff --git a/fs/proc/base.c b/fs/proc/base.c index dd51e50..c3834da 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -2118,6 +2118,7 @@ static int show_timer(struct seq_file *m, void *v) nstr[notify & ~SIGEV_THREAD_ID], (notify & SIGEV_THREAD_ID) ? "tid" : "pid", pid_nr_ns(timer->it_pid, tp->ns)); + seq_printf(m, "ClockID: %d\n", timer->it_clock); return 0; } -- cgit v0.10.2 From b56433cb782d1cc7e44fc46d2ce3917fa75d2236 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Mon, 27 May 2013 16:19:55 +0200 Subject: s390/pgtable: Fix check for pgste/storage key handling pte_present might return true on PAGE_TYPE_NONE, even if the invalid bit is on. Modify the existing check of the pgste functions to avoid crashes. [ Martin Schwidefsky: added ptep_modify_prot_[start|commit] bits ] Reported-by: Martin Schwidefky Signed-off-by: Christian Borntraeger CC: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index 0f0de30..ac01463 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -646,7 +646,7 @@ static inline pgste_t pgste_update_all(pte_t *ptep, pgste_t pgste) unsigned long address, bits; unsigned char skey; - if (!pte_present(*ptep)) + if (pte_val(*ptep) & _PAGE_INVALID) return pgste; address = pte_val(*ptep) & PAGE_MASK; skey = page_get_storage_key(address); @@ -680,7 +680,7 @@ static inline pgste_t pgste_update_young(pte_t *ptep, pgste_t pgste) #ifdef CONFIG_PGSTE int young; - if (!pte_present(*ptep)) + if (pte_val(*ptep) & _PAGE_INVALID) return pgste; /* Get referenced bit from storage key */ young = page_reset_referenced(pte_val(*ptep) & PAGE_MASK); @@ -706,7 +706,7 @@ static inline void pgste_set_key(pte_t *ptep, pgste_t pgste, pte_t entry) unsigned long address; unsigned long okey, nkey; - if (!pte_present(entry)) + if (pte_val(entry) & _PAGE_INVALID) return; address = pte_val(entry) & PAGE_MASK; okey = nkey = page_get_storage_key(address); @@ -1098,6 +1098,9 @@ static inline pte_t ptep_modify_prot_start(struct mm_struct *mm, pte = *ptep; if (!mm_exclusive(mm)) __ptep_ipte(address, ptep); + + if (mm_has_pgste(mm)) + pgste = pgste_update_all(&pte, pgste); return pte; } @@ -1105,9 +1108,13 @@ static inline void ptep_modify_prot_commit(struct mm_struct *mm, unsigned long address, pte_t *ptep, pte_t pte) { + pgste_t pgste; + if (mm_has_pgste(mm)) { + pgste = *(pgste_t *)(ptep + PTRS_PER_PTE); + pgste_set_key(ptep, pgste, pte); pgste_set_pte(ptep, pte); - pgste_set_unlock(ptep, *(pgste_t *)(ptep + PTRS_PER_PTE)); + pgste_set_unlock(ptep, pgste); } else *ptep = pte; } -- cgit v0.10.2 From 1d7004f0593f631b78745e4c835d8e09b31f4996 Mon Sep 17 00:00:00 2001 From: Frederico Cadete Date: Sat, 25 May 2013 22:48:57 +0200 Subject: xmem/tmem: fix 'undefined variable' build error. In the (not so useful) kernel configuration where CONFIG_SWAP is undefined and CONFIG_XEN_SELFBALLOONING is defined, xen_tmem_init would use undefined variable 'static bool frontswap'. Added #else to have #define frontswap (0) in the case where CONFIG_FRONTSWAP is not defined. Signed-off-by: Frederico Cadete Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/tmem.c b/drivers/xen/tmem.c index 18e8bd8..cc072c6 100644 --- a/drivers/xen/tmem.c +++ b/drivers/xen/tmem.c @@ -41,6 +41,8 @@ module_param(selfballooning, bool, S_IRUGO); #ifdef CONFIG_FRONTSWAP static bool frontswap __read_mostly = true; module_param(frontswap, bool, S_IRUGO); +#else /* CONFIG_FRONTSWAP */ +#define frontswap (0) #endif /* CONFIG_FRONTSWAP */ #ifdef CONFIG_XEN_SELFBALLOONING -- cgit v0.10.2 From d3134e211e8db7fa833c40b5879fc022693e16c2 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Tue, 28 May 2013 15:41:57 +0530 Subject: ASoC: wm8994: use the correct pointer to get the control value Signed-off-by: Vinod Koul Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 1eb152c..62dc305 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -1031,7 +1031,7 @@ static int aif1clk_ev(struct snd_soc_dapm_widget *w, { struct snd_soc_codec *codec = w->codec; struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); - struct wm8994 *control = codec->control_data; + struct wm8994 *control = wm8994->wm8994; int mask = WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA; int i; int dac; -- cgit v0.10.2 From 9767a58b8b2a0b153c246fb6306c7d48d51bb379 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 28 May 2013 12:52:08 +0100 Subject: ASoC: wm8994: Fix reporting of accessory removal on WM8958 During recent refactoring the code to report removal when MICDET reports an absent microphone was removed, causing problems for systems which rely solely on the MICDET for this functionality. Restore it. Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 62dc305..b38382c 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -3833,6 +3833,11 @@ static irqreturn_t wm8958_mic_irq(int irq, void *data) dev_dbg(codec->dev, "Ignoring removed jack\n"); return IRQ_HANDLED; } + } else if (!(reg & WM8958_MICD_STS)) { + snd_soc_jack_report(wm8994->micdet[0].jack, 0, + SND_JACK_MECHANICAL | SND_JACK_HEADSET | + wm8994->btn_mask); + goto out; } if (wm8994->mic_detecting) -- cgit v0.10.2 From 7d6898be8db92450ce7a0afcc4238680b9703e2b Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Tue, 28 May 2013 15:06:42 +0530 Subject: ASoC: wm8994: check for array index returned The array 'drc_cfg' of size 3 may use index value -22 (EINVAL) The array 'retune_mobile_cfg' of size 3 may use index value -22 (EINVAL) Signed-off-by: Vinod Koul Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index b38382c..dfd997a 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -383,6 +383,8 @@ static int wm8994_get_drc_enum(struct snd_kcontrol *kcontrol, struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); int drc = wm8994_get_drc(kcontrol->id.name); + if (drc < 0) + return drc; ucontrol->value.enumerated.item[0] = wm8994->drc_cfg[drc]; return 0; @@ -488,6 +490,9 @@ static int wm8994_get_retune_mobile_enum(struct snd_kcontrol *kcontrol, struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); int block = wm8994_get_retune_mobile_block(kcontrol->id.name); + if (block < 0) + return block; + ucontrol->value.enumerated.item[0] = wm8994->retune_mobile_cfg[block]; return 0; -- cgit v0.10.2 From 04d245b7899c020559402841d2f70ddd740a7704 Mon Sep 17 00:00:00 2001 From: Nicolas Schichan Date: Thu, 23 May 2013 16:53:02 +0200 Subject: ASoC: cs42l52: fix default value for MASTERA_VOL. The default register value for MASTERA_VOL is 0x00, the same as MASTERB_VOL. Signed-off-by: Nicolas Schichan Acked-by: Brian Austin Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/sound/soc/codecs/cs42l52.c b/sound/soc/codecs/cs42l52.c index 8465c1fa..030f53c 100644 --- a/sound/soc/codecs/cs42l52.c +++ b/sound/soc/codecs/cs42l52.c @@ -86,7 +86,7 @@ static const struct reg_default cs42l52_reg_defaults[] = { { CS42L52_BEEP_VOL, 0x00 }, /* r1D Beep Volume off Time */ { CS42L52_BEEP_TONE_CTL, 0x00 }, /* r1E Beep Tone Cfg. */ { CS42L52_TONE_CTL, 0x00 }, /* r1F Tone Ctl */ - { CS42L52_MASTERA_VOL, 0x88 }, /* r20 Master A Volume */ + { CS42L52_MASTERA_VOL, 0x00 }, /* r20 Master A Volume */ { CS42L52_MASTERB_VOL, 0x00 }, /* r21 Master B Volume */ { CS42L52_HPA_VOL, 0x00 }, /* r22 Headphone A Volume */ { CS42L52_HPB_VOL, 0x00 }, /* r23 Headphone B Volume */ -- cgit v0.10.2 From e89b4058096569c999fa599370162022a5a2b3d2 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Tue, 21 May 2013 19:41:48 +0200 Subject: ARM: Kirkwood: TS219: Fix crash by double PCIe instantiation When creating the DT based boards-ts219.c the none DT ts219-setup.c was used as a template. This includes a lateinit() call to initialize the PCIe bus. The code makes use of machine_is_ts219() which is never true on DT, so a FIXME was added and the code left as is. This was unproblematic until b73690c8f8b5d: "ARM: Kirkwood: Support basic hotplug for PCI-E" which changes the way the PCIe bus is initialized. The non-DT ts219-setup.c now crashes during boot. The lateinit() call in the DT boards-ts219.c is being called, machine_is_ts219() is true and so the PCIe is initialized a second time. This patch removes the useless, and now clearly dangerous, code from boards-ts219.c, making ts219-setup.c work again. Signed-off-by: Andrew Lunn Cc: # v3.9.x Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c index acb0187..4695d5f 100644 --- a/arch/arm/mach-kirkwood/board-ts219.c +++ b/arch/arm/mach-kirkwood/board-ts219.c @@ -41,13 +41,3 @@ void __init qnap_dt_ts219_init(void) pm_power_off = qnap_tsx1x_power_off; } - -/* FIXME: Will not work with DT. Maybe use MPP40_GPIO? */ -static int __init ts219_pci_init(void) -{ - if (machine_is_ts219()) - kirkwood_pcie_init(KW_PCIE0); - - return 0; -} -subsys_initcall(ts219_pci_init); -- cgit v0.10.2 From b60b61d41220c8d34e2c62a748bc78bc5d40585e Mon Sep 17 00:00:00 2001 From: Nadav Haklai Date: Thu, 23 May 2013 10:54:02 +0200 Subject: ARM: mvebu: Fix bug in coherency fabric low level init function When adding CPU to the SMP group and enabling the coherency on this CPU we must protect the register access. The previous implementation claims to be atomic but doesn't provide any protection against parallel access to the coherency fabric control and configuration registers. This patch fixes this by using the ldrex and strex mechanism. This method should be used in all accesses to those registers. [gregory.clement@free-electrons.com: fixed the commit's topic] Signed-off-by: Nadav Haklai Signed-off-by: Gregory CLEMENT Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S index 53e8391..5476669 100644 --- a/arch/arm/mach-mvebu/coherency_ll.S +++ b/arch/arm/mach-mvebu/coherency_ll.S @@ -32,15 +32,21 @@ ENTRY(ll_set_cpu_coherent) /* Add CPU to SMP group - Atomic */ add r3, r0, #ARMADA_XP_CFB_CTL_REG_OFFSET - ldr r2, [r3] +1: + ldrex r2, [r3] orr r2, r2, r1 - str r2, [r3] + strex r0, r2, [r3] + cmp r0, #0 + bne 1b /* Enable coherency on CPU - Atomic */ - add r3, r0, #ARMADA_XP_CFB_CFG_REG_OFFSET - ldr r2, [r3] + add r3, r3, #ARMADA_XP_CFB_CFG_REG_OFFSET +1: + ldrex r2, [r3] orr r2, r2, r1 - str r2, [r3] + strex r0, r2, [r3] + cmp r0, #0 + bne 1b dsb -- cgit v0.10.2 From 6721cb60022629ae76365551f05d9658b8d14c55 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Red Hat)" Date: Thu, 23 May 2013 14:21:36 -0400 Subject: ring-buffer: Do not poll non allocated cpu buffers The tracing infrastructure sets up for possible CPUs, but it uses the ring buffer polling, it is possible to call the ring buffer polling code with a CPU that hasn't been allocated. This will cause a kernel oops when it access a ring buffer cpu buffer that is part of the possible cpus but hasn't been allocated yet as the CPU has never been online. Reported-by: Mauro Carvalho Chehab Tested-by: Mauro Carvalho Chehab Signed-off-by: Steven Rostedt diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index b59aea2..e444ff8 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -620,6 +620,9 @@ int ring_buffer_poll_wait(struct ring_buffer *buffer, int cpu, if (cpu == RING_BUFFER_ALL_CPUS) work = &buffer->irq_work; else { + if (!cpumask_test_cpu(cpu, buffer->cpumask)) + return -EINVAL; + cpu_buffer = buffer->buffers[cpu]; work = &cpu_buffer->irq_work; } -- cgit v0.10.2 From 6390460af8a672754dd6743f326515e98f52b2a7 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Mon, 20 May 2013 23:05:15 +0530 Subject: net/9p: Handle error in zero copy request correctly for 9p2000.u For zero copy request, error will be encoded in the user space buffer. So copy the error code correctly using copy_from_user. Here we use the extra bytes we allocate for zero copy request. If total error details are more than P9_ZC_HDR_SZ - 7 bytes, we return -EFAULT. The patch also avoid a memory allocation in the error path. Signed-off-by: Aneesh Kumar K.V Signed-off-by: Eric Van Hensbergen diff --git a/net/9p/client.c b/net/9p/client.c index 8eb7542..addc116c 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -562,36 +562,19 @@ static int p9_check_zc_errors(struct p9_client *c, struct p9_req_t *req, if (!p9_is_proto_dotl(c)) { /* Error is reported in string format */ - uint16_t len; - /* 7 = header size for RERROR, 2 is the size of string len; */ - int inline_len = in_hdrlen - (7 + 2); + int len; + /* 7 = header size for RERROR; */ + int inline_len = in_hdrlen - 7; - /* Read the size of error string */ - err = p9pdu_readf(req->rc, c->proto_version, "w", &len); - if (err) - goto out_err; - - ename = kmalloc(len + 1, GFP_NOFS); - if (!ename) { - err = -ENOMEM; + len = req->rc->size - req->rc->offset; + if (len > (P9_ZC_HDR_SZ - 7)) { + err = -EFAULT; goto out_err; } - if (len <= inline_len) { - /* We have error in protocol buffer itself */ - if (pdu_read(req->rc, ename, len)) { - err = -EFAULT; - goto out_free; - } - } else { - /* - * Part of the data is in user space buffer. - */ - if (pdu_read(req->rc, ename, inline_len)) { - err = -EFAULT; - goto out_free; - - } + ename = &req->rc->sdata[req->rc->offset]; + if (len > inline_len) { + /* We have error in external buffer */ if (kern_buf) { memcpy(ename + inline_len, uidata, len - inline_len); @@ -600,19 +583,19 @@ static int p9_check_zc_errors(struct p9_client *c, struct p9_req_t *req, uidata, len - inline_len); if (err) { err = -EFAULT; - goto out_free; + goto out_err; } } } - ename[len] = 0; - if (p9_is_proto_dotu(c)) { - /* For dotu we also have error code */ - err = p9pdu_readf(req->rc, - c->proto_version, "d", &ecode); - if (err) - goto out_free; + ename = NULL; + err = p9pdu_readf(req->rc, c->proto_version, "s?d", + &ename, &ecode); + if (err) + goto out_err; + + if (p9_is_proto_dotu(c)) err = -ecode; - } + if (!err || !IS_ERR_VALUE(err)) { err = p9_errstr2errno(ename, strlen(ename)); @@ -628,8 +611,6 @@ static int p9_check_zc_errors(struct p9_client *c, struct p9_req_t *req, } return err; -out_free: - kfree(ename); out_err: p9_debug(P9_DEBUG_ERROR, "couldn't parse error%d\n", err); return err; -- cgit v0.10.2 From b3657453f16a7b84eab9b93bb9a9a2901ffc70af Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Mon, 27 May 2013 21:09:53 +0200 Subject: brcmfmac: Turn off ARP offloading when configured for AP. ARP offloading should only be used in STA or P2P client mode. It is currently configured once at init. When being configured for AP ARP offloading should be turned off and when AP mode is left it can be turned back on. Cc: stable@vger.kernel.org Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c index be0787c..9431af2 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c @@ -27,7 +27,6 @@ #include "tracepoint.h" #define PKTFILTER_BUF_SIZE 128 -#define BRCMF_ARPOL_MODE 0xb /* agent|snoop|peer_autoreply */ #define BRCMF_DEFAULT_BCN_TIMEOUT 3 #define BRCMF_DEFAULT_SCAN_CHANNEL_TIME 40 #define BRCMF_DEFAULT_SCAN_UNASSOC_TIME 40 @@ -338,23 +337,6 @@ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp) goto done; } - /* Try to set and enable ARP offload feature, this may fail */ - err = brcmf_fil_iovar_int_set(ifp, "arp_ol", BRCMF_ARPOL_MODE); - if (err) { - brcmf_dbg(TRACE, "failed to set ARP offload mode to 0x%x, err = %d\n", - BRCMF_ARPOL_MODE, err); - err = 0; - } else { - err = brcmf_fil_iovar_int_set(ifp, "arpoe", 1); - if (err) { - brcmf_dbg(TRACE, "failed to enable ARP offload err = %d\n", - err); - err = 0; - } else - brcmf_dbg(TRACE, "successfully enabled ARP offload to 0x%x\n", - BRCMF_ARPOL_MODE); - } - /* Setup packet filter */ brcmf_c_pktfilter_offload_set(ifp, BRCMF_DEFAULT_PACKET_FILTER); brcmf_c_pktfilter_offload_enable(ifp, BRCMF_DEFAULT_PACKET_FILTER, diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h index 0f2c83b..665ef69 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h @@ -23,6 +23,12 @@ #define BRCMF_FIL_ACTION_FRAME_SIZE 1800 +/* ARP Offload feature flags for arp_ol iovar */ +#define BRCMF_ARP_OL_AGENT 0x00000001 +#define BRCMF_ARP_OL_SNOOP 0x00000002 +#define BRCMF_ARP_OL_HOST_AUTO_REPLY 0x00000004 +#define BRCMF_ARP_OL_PEER_AUTO_REPLY 0x00000008 + enum brcmf_fil_p2p_if_types { BRCMF_FIL_P2P_IF_CLIENT, diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 761f501..94285f6 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -459,6 +459,38 @@ send_key_to_dongle(struct net_device *ndev, struct brcmf_wsec_key *key) return err; } +static s32 +brcmf_configure_arp_offload(struct brcmf_if *ifp, bool enable) +{ + s32 err; + u32 mode; + + if (enable) + mode = BRCMF_ARP_OL_AGENT | BRCMF_ARP_OL_PEER_AUTO_REPLY; + else + mode = 0; + + /* Try to set and enable ARP offload feature, this may fail, then it */ + /* is simply not supported and err 0 will be returned */ + err = brcmf_fil_iovar_int_set(ifp, "arp_ol", mode); + if (err) { + brcmf_dbg(TRACE, "failed to set ARP offload mode to 0x%x, err = %d\n", + mode, err); + err = 0; + } else { + err = brcmf_fil_iovar_int_set(ifp, "arpoe", enable); + if (err) { + brcmf_dbg(TRACE, "failed to configure (%d) ARP offload err = %d\n", + enable, err); + err = 0; + } else + brcmf_dbg(TRACE, "successfully configured (%d) ARP offload to 0x%x\n", + enable, mode); + } + + return err; +} + static struct wireless_dev *brcmf_cfg80211_add_iface(struct wiphy *wiphy, const char *name, enum nl80211_iftype type, @@ -3683,6 +3715,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, } brcmf_set_mpc(ifp, 0); + brcmf_configure_arp_offload(ifp, false); /* find the RSN_IE */ rsn_ie = brcmf_parse_tlvs((u8 *)settings->beacon.tail, @@ -3789,8 +3822,10 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, set_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state); exit: - if (err) + if (err) { brcmf_set_mpc(ifp, 1); + brcmf_configure_arp_offload(ifp, true); + } return err; } @@ -3831,6 +3866,7 @@ static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev) brcmf_err("bss_enable config failed %d\n", err); } brcmf_set_mpc(ifp, 1); + brcmf_configure_arp_offload(ifp, true); set_bit(BRCMF_VIF_STATUS_AP_CREATING, &ifp->vif->sme_state); clear_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state); @@ -5229,6 +5265,8 @@ static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg) if (err) goto default_conf_out; + brcmf_configure_arp_offload(ifp, true); + cfg->dongle_up = true; default_conf_out: -- cgit v0.10.2 From 15a953d0919e3e7c94691ecabd0d9f74373f19aa Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Mon, 27 May 2013 21:09:54 +0200 Subject: brcmfmac: Fix p2p setup when connected to ap on 5G. The firmware requires that on p2p setup when net interfaces are created or updated that they start initially with the same channel as the channel in use for the current connection (if any). If none exists take default channel 11. Reviewed-by: Arend Van Spriel Reviewed-by: Franky (Zhenhui) Lin Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index e7a1a47..17275ce 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -47,6 +47,7 @@ #define IS_P2P_SOCIAL_CHANNEL(channel) ((channel == SOCIAL_CHAN_1) || \ (channel == SOCIAL_CHAN_2) || \ (channel == SOCIAL_CHAN_3)) +#define BRCMF_P2P_TEMP_CHAN SOCIAL_CHAN_3 #define SOCIAL_CHAN_CNT 3 #define AF_PEER_SEARCH_CNT 2 @@ -2013,17 +2014,30 @@ static void brcmf_p2p_get_current_chanspec(struct brcmf_p2p_info *p2p, u16 *chanspec) { struct brcmf_if *ifp; - struct brcmf_fil_chan_info_le ci; + u8 mac_addr[ETH_ALEN]; struct brcmu_chan ch; - s32 err; + struct brcmf_bss_info_le *bi; + u8 *buf; ifp = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp; - ch.chnum = 11; - - err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_CHANNEL, &ci, sizeof(ci)); - if (!err) - ch.chnum = le32_to_cpu(ci.hw_channel); + if (brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSSID, mac_addr, + ETH_ALEN) == 0) { + buf = kzalloc(WL_BSS_INFO_MAX, GFP_KERNEL); + if (buf != NULL) { + *(__le32 *)buf = cpu_to_le32(WL_BSS_INFO_MAX); + if (brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSS_INFO, + buf, WL_BSS_INFO_MAX) == 0) { + bi = (struct brcmf_bss_info_le *)(buf + 4); + *chanspec = le16_to_cpu(bi->chanspec); + kfree(buf); + return; + } + kfree(buf); + } + } + /* Use default channel for P2P */ + ch.chnum = BRCMF_P2P_TEMP_CHAN; ch.bw = BRCMU_CHAN_BW_20; p2p->cfg->d11inf.encchspec(&ch); *chanspec = ch.chspec; -- cgit v0.10.2 From 24e28beef939df8666a5d2784d6617cd9bb910a0 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Mon, 27 May 2013 21:09:55 +0200 Subject: brcmfmac: add additional parameter to brcmf_free_vif() Pass the struct brcmf_cfg80211_info instance instead of obtaining through vif itself using vif->wdev. This is needed as the netdev associated with this vif is already unregistered. Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index 17275ce..167b7af 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -1955,21 +1955,21 @@ s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg) err = brcmf_fil_iovar_int_set(pri_ifp, "p2p_disc", 1); if (err < 0) { brcmf_err("set p2p_disc error\n"); - brcmf_free_vif(p2p_vif); + brcmf_free_vif(cfg, p2p_vif); goto exit; } /* obtain bsscfg index for P2P discovery */ err = brcmf_fil_iovar_int_get(pri_ifp, "p2p_dev", &bssidx); if (err < 0) { brcmf_err("retrieving discover bsscfg index failed\n"); - brcmf_free_vif(p2p_vif); + brcmf_free_vif(cfg, p2p_vif); goto exit; } /* Verify that firmware uses same bssidx as driver !! */ if (p2p_ifp->bssidx != bssidx) { brcmf_err("Incorrect bssidx=%d, compared to p2p_ifp->bssidx=%d\n", bssidx, p2p_ifp->bssidx); - brcmf_free_vif(p2p_vif); + brcmf_free_vif(cfg, p2p_vif); goto exit; } @@ -1997,7 +1997,7 @@ void brcmf_p2p_detach(struct brcmf_p2p_info *p2p) brcmf_p2p_cancel_remain_on_channel(vif->ifp); brcmf_p2p_deinit_discovery(p2p); /* remove discovery interface */ - brcmf_free_vif(vif); + brcmf_free_vif(p2p->cfg, vif); p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL; } /* just set it all to zero */ @@ -2222,7 +2222,7 @@ static struct wireless_dev *brcmf_p2p_create_p2pdev(struct brcmf_p2p_info *p2p, return &p2p_vif->wdev; fail: - brcmf_free_vif(p2p_vif); + brcmf_free_vif(p2p->cfg, p2p_vif); return ERR_PTR(err); } @@ -2231,13 +2231,12 @@ fail: * * @vif: virtual interface object to delete. */ -static void brcmf_p2p_delete_p2pdev(struct brcmf_cfg80211_vif *vif) +static void brcmf_p2p_delete_p2pdev(struct brcmf_cfg80211_info *cfg, + struct brcmf_cfg80211_vif *vif) { - struct brcmf_p2p_info *p2p = &vif->ifp->drvr->config->p2p; - cfg80211_unregister_wdev(&vif->wdev); - p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL; - brcmf_free_vif(vif); + cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL; + brcmf_free_vif(cfg, vif); } /** @@ -2328,7 +2327,7 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, return &ifp->vif->wdev; fail: - brcmf_free_vif(vif); + brcmf_free_vif(cfg, vif); return ERR_PTR(err); } @@ -2364,7 +2363,7 @@ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) break; case NL80211_IFTYPE_P2P_DEVICE: - brcmf_p2p_delete_p2pdev(vif); + brcmf_p2p_delete_p2pdev(cfg, vif); return 0; default: return -ENOTSUPP; @@ -2392,7 +2391,7 @@ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) err = 0; } brcmf_cfg80211_arm_vif_event(cfg, NULL); - brcmf_free_vif(vif); + brcmf_free_vif(cfg, vif); p2p->bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = NULL; return err; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 94285f6..f8c86b5 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4292,20 +4292,16 @@ struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg, return vif; } -void brcmf_free_vif(struct brcmf_cfg80211_vif *vif) +void brcmf_free_vif(struct brcmf_cfg80211_info *cfg, + struct brcmf_cfg80211_vif *vif) { - struct brcmf_cfg80211_info *cfg; - struct wiphy *wiphy; - - wiphy = vif->wdev.wiphy; - cfg = wiphy_priv(wiphy); list_del(&vif->list); cfg->vif_cnt--; kfree(vif); if (!cfg->vif_cnt) { - wiphy_unregister(wiphy); - wiphy_free(wiphy); + wiphy_unregister(cfg->wiphy); + wiphy_free(cfg->wiphy); } } @@ -4888,8 +4884,7 @@ cfg80211_p2p_attach_out: wl_deinit_priv(cfg); cfg80211_attach_out: - brcmf_free_vif(vif); - wiphy_free(wiphy); + brcmf_free_vif(cfg, vif); return NULL; } @@ -4901,7 +4896,7 @@ void brcmf_cfg80211_detach(struct brcmf_cfg80211_info *cfg) wl_deinit_priv(cfg); brcmf_btcoex_detach(cfg); list_for_each_entry_safe(vif, tmp, &cfg->vif_list, list) { - brcmf_free_vif(vif); + brcmf_free_vif(cfg, vif); } } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h index a71cff8..d9bdaf9 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h @@ -487,7 +487,8 @@ enum nl80211_iftype brcmf_cfg80211_get_iftype(struct brcmf_if *ifp); struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg, enum nl80211_iftype type, bool pm_block); -void brcmf_free_vif(struct brcmf_cfg80211_vif *vif); +void brcmf_free_vif(struct brcmf_cfg80211_info *cfg, + struct brcmf_cfg80211_vif *vif); s32 brcmf_vif_set_mgmt_ie(struct brcmf_cfg80211_vif *vif, s32 pktflag, const u8 *vndr_ie_buf, u32 vndr_ie_len); -- cgit v0.10.2 From 9390ace916b2fd866c1762b1cd16c276d8c8c890 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Mon, 27 May 2013 21:09:56 +0200 Subject: brcmfmac: free net device when registration fails When registration fails the net device is no longer needed. Free the net device and remove reference to private data from the driver. Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 59c2546..f04e355 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -656,7 +656,9 @@ int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked) return 0; fail: + drvr->iflist[ifp->bssidx] = NULL; ndev->netdev_ops = NULL; + free_netdev(ndev); return -EBADE; } @@ -720,6 +722,9 @@ static int brcmf_net_p2p_attach(struct brcmf_if *ifp) return 0; fail: + ifp->drvr->iflist[ifp->bssidx] = NULL; + ndev->netdev_ops = NULL; + free_netdev(ndev); return -EBADE; } @@ -925,8 +930,6 @@ fail: brcmf_fws_del_interface(ifp); brcmf_fws_deinit(drvr); } - free_netdev(ifp->ndev); - drvr->iflist[0] = NULL; if (p2p_ifp) { free_netdev(p2p_ifp->ndev); drvr->iflist[1] = NULL; @@ -934,7 +937,8 @@ fail: return ret; } if ((brcmf_p2p_enable) && (p2p_ifp)) - brcmf_net_p2p_attach(p2p_ifp); + if (brcmf_net_p2p_attach(p2p_ifp) < 0) + brcmf_p2p_enable = 0; return 0; } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c index 5a64280..83ee53a 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c @@ -202,7 +202,8 @@ static void brcmf_fweh_handle_if_event(struct brcmf_pub *drvr, return; brcmf_fws_add_interface(ifp); if (!drvr->fweh.evt_handler[BRCMF_E_IF]) - err = brcmf_net_attach(ifp, false); + if (brcmf_net_attach(ifp, false) < 0) + return; } if (ifevent->action == BRCMF_E_IF_CHANGE) -- cgit v0.10.2 From cbb371da233eb2b4c200010a5372579b880b4ae6 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Mon, 27 May 2013 21:09:57 +0200 Subject: brcmfmac: use struct net_device::destructor to remove interfaces Upon deleting a P2P_CLIENT/GO interface the vif and consequently the wdev is freed before the net_device is actually being unregistered but cfg80211 still needs to access the wdev. Using destructor field to free the net_device and vif. Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index f04e355..b98f223 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -653,6 +653,7 @@ int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked) brcmf_dbg(INFO, "%s: Broadcom Dongle Host Driver\n", ndev->name); + ndev->destructor = free_netdev; return 0; fail: @@ -793,6 +794,7 @@ void brcmf_del_if(struct brcmf_pub *drvr, s32 bssidx) struct brcmf_if *ifp; ifp = drvr->iflist[bssidx]; + drvr->iflist[bssidx] = NULL; if (!ifp) { brcmf_err("Null interface, idx=%d\n", bssidx); return; @@ -813,15 +815,13 @@ void brcmf_del_if(struct brcmf_pub *drvr, s32 bssidx) cancel_work_sync(&ifp->setmacaddr_work); cancel_work_sync(&ifp->multicast_work); } - + /* unregister will take care of freeing it */ unregister_netdev(ifp->ndev); if (bssidx == 0) brcmf_cfg80211_detach(drvr->config); - free_netdev(ifp->ndev); } else { kfree(ifp); } - drvr->iflist[bssidx] = NULL; } int brcmf_attach(uint bus_hdrlen, struct device *dev) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index 167b7af..79555f0 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -2240,6 +2240,25 @@ static void brcmf_p2p_delete_p2pdev(struct brcmf_cfg80211_info *cfg, } /** + * brcmf_p2p_free_p2p_if() - free up net device related data. + * + * @ndev: net device that needs to be freed. + */ +static void brcmf_p2p_free_p2p_if(struct net_device *ndev) +{ + struct brcmf_cfg80211_info *cfg; + struct brcmf_cfg80211_vif *vif; + struct brcmf_if *ifp; + + ifp = netdev_priv(ndev); + cfg = ifp->drvr->config; + vif = ifp->vif; + + brcmf_free_vif(cfg, vif); + free_netdev(ifp->ndev); +} + +/** * brcmf_p2p_add_vif() - create a new P2P virtual interface. * * @wiphy: wiphy device of new interface. @@ -2316,6 +2335,9 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, brcmf_err("Registering netdevice failed\n"); goto fail; } + /* override destructor */ + ifp->ndev->destructor = brcmf_p2p_free_p2p_if; + cfg->p2p.bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = vif; /* Disable firmware roaming for P2P interface */ brcmf_fil_iovar_int_set(ifp, "roam_off", 1); @@ -2391,7 +2413,6 @@ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) err = 0; } brcmf_cfg80211_arm_vif_event(cfg, NULL); - brcmf_free_vif(cfg, vif); p2p->bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = NULL; return err; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index f8c86b5..656ce87 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4678,7 +4678,6 @@ static s32 brcmf_notify_vif_event(struct brcmf_if *ifp, return 0; case BRCMF_E_IF_DEL: - ifp->vif = NULL; mutex_unlock(&event->vif_event_lock); /* event may not be upon user request */ if (brcmf_cfg80211_vif_event_armed(cfg)) -- cgit v0.10.2 From 1c9d30cfac9901c4f7447deacdfb6b77eee1a096 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Mon, 27 May 2013 21:09:58 +0200 Subject: brcmfmac: Add multi channel support for P2P. Multi channel support was disabled. This patch will enable it and configure the P2P GO on the correct frequency when multi channel is used. Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 656ce87..6a87178 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3672,10 +3672,28 @@ brcmf_config_ap_mgmt_ie(struct brcmf_cfg80211_vif *vif, } static s32 +brcmf_cfg80211_set_channel(struct brcmf_cfg80211_info *cfg, + struct brcmf_if *ifp, + struct ieee80211_channel *channel) +{ + u16 chanspec; + s32 err; + + brcmf_dbg(TRACE, "band=%d, center_freq=%d\n", channel->band, + channel->center_freq); + + chanspec = channel_to_chanspec(&cfg->d11inf, channel); + err = brcmf_fil_iovar_int_set(ifp, "chanspec", chanspec); + + return err; +} + +static s32 brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, struct cfg80211_ap_settings *settings) { s32 ie_offset; + struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); struct brcmf_if *ifp = netdev_priv(ndev); struct brcmf_tlv *ssid_ie; struct brcmf_ssid_le ssid_le; @@ -3746,6 +3764,12 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, brcmf_config_ap_mgmt_ie(ifp->vif, &settings->beacon); + err = brcmf_cfg80211_set_channel(cfg, ifp, settings->chandef.chan); + if (err < 0) { + brcmf_err("Set Channel failed, %d\n", err); + goto exit; + } + if (settings->beacon_interval) { err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_BCNPRD, settings->beacon_interval); @@ -4184,7 +4208,7 @@ static const struct ieee80211_iface_limit brcmf_iface_limits[] = { static const struct ieee80211_iface_combination brcmf_iface_combos[] = { { .max_interfaces = BRCMF_IFACE_MAX_CNT, - .num_different_channels = 1, /* no multi-channel for now */ + .num_different_channels = 2, .n_limits = ARRAY_SIZE(brcmf_iface_limits), .limits = brcmf_iface_limits } -- cgit v0.10.2 From 102fd0d69eed4c778555fe957f8660dfee1568ea Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Mon, 27 May 2013 21:09:59 +0200 Subject: brcmfmac: Disable powersave mode for P2P link. For p2p client mode powersave mode should be kept disabled. It is working but inefficient. In general p2p links do no benefit from this mode, because these links are setup temporarily to transfer data. Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 6a87178..301e572 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -2248,6 +2248,11 @@ brcmf_cfg80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *ndev, } pm = enabled ? PM_FAST : PM_OFF; + /* Do not enable the power save after assoc if it is a p2p interface */ + if (ifp->vif->wdev.iftype == NL80211_IFTYPE_P2P_CLIENT) { + brcmf_dbg(INFO, "Do not enable power save for P2P clients\n"); + pm = PM_OFF; + } brcmf_dbg(INFO, "power save %s\n", (pm ? "enabled" : "disabled")); err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM, pm); -- cgit v0.10.2 From add295a4afbdf5852d004c754c552d692b0fcac8 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Tue, 28 May 2013 14:52:19 +0200 Subject: ath9k: use correct OTP register offsets for AR9550 Accessing the OTP memory on AR9950 causes a data bus like this: Data bus error, epc == 801f7774, ra == 801f7774 Oops[#1]: CPU: 0 PID: 1 Comm: swapper Not tainted 3.10.0-rc3 #592 task: 87c28000 ti: 87c22000 task.ti: 87c22000 $ 0 : 00000000 00000061 deadc0de 00000000 $ 4 : b8115f18 00015f18 00000007 00000004 $ 8 : 00000001 7c7c3c7c 7c7c7c7c 7c7c7c7c $12 : 7c7c3c7c 80320a68 00000000 7c7c7c3c $16 : 87cd8010 00015f18 00000007 00000000 $20 : 00000064 00000004 87c23c7c 8035210c $24 : 00000000 801f3674 $28 : 87c22000 87c23b48 00000001 801f7774 Hi : 00000000 Lo : 00000064 epc : 801f7774 ath9k_hw_wait+0x58/0xb0 Not tainted ra : 801f7774 ath9k_hw_wait+0x58/0xb0 Status: 1000cc03 KERNEL EXL IE Cause : 4080801c PrId : 00019750 (MIPS 74Kc) Modules linked in: Process swapper (pid: 1, threadinfo=87c22000, task=87c28000, ts=00000000) Stack : 0000000f 00000061 00002710 8006240c 00000001 87cd8010 87c23bb0 87cd8010 00000000 00000004 00000003 80210c7c 000000b3 67fa8000 0000032a 000006fe 000003e8 00000002 00000028 87c23bf0 000003ff 80210d24 803e5630 80210e28 00000000 00000007 87cd8010 00007044 00000004 00000061 000003ff 000001ff 87c26000 87cd8010 00000220 87cd8bb8 80210000 8020fcf4 87c22000 87c23c08 ... Call Trace: [<801f7774>] ath9k_hw_wait+0x58/0xb0 [<80210c7c>] ar9300_otp_read_word+0x80/0xd4 [<80210d24>] ar9300_read_otp+0x54/0xb0 [<8020fcf4>] ar9300_check_eeprom_header+0x1c/0x40 [<80210fe4>] ath9k_hw_ar9300_fill_eeprom+0x118/0x39c [<80206650>] ath9k_hw_eeprom_init+0x74/0xb4 [<801f96d0>] ath9k_hw_init+0x7ec/0x96c [<801e65ec>] ath9k_init_device+0x340/0x758 [<801f35d0>] ath_ahb_probe+0x21c/0x2c0 [<801c041c>] driver_probe_device+0xc0/0x1e4 [<801c05ac>] __driver_attach+0x6c/0xa4 [<801bea08>] bus_for_each_dev+0x64/0xa8 [<801bfa40>] bus_add_driver+0xcc/0x24c [<801c0954>] driver_register+0xbc/0x17c [<803f8fc0>] ath9k_init+0x5c/0x88 [<800608fc>] do_one_initcall+0xec/0x1a0 [<803e6a68>] kernel_init_freeable+0x13c/0x200 [<80309cdc>] kernel_init+0x1c/0xe4 [<80062450>] ret_from_kernel_thread+0x10/0x18 On the AR9550, the OTP registers are located at the same address as on the AR9340. Use the correct values to avoid the error. Cc: stable@vger.kernel.org # 3.6+ Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h index 54ba42f..874f657 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h @@ -68,13 +68,16 @@ #define AR9300_BASE_ADDR 0x3ff #define AR9300_BASE_ADDR_512 0x1ff -#define AR9300_OTP_BASE (AR_SREV_9340(ah) ? 0x30000 : 0x14000) -#define AR9300_OTP_STATUS (AR_SREV_9340(ah) ? 0x30018 : 0x15f18) +#define AR9300_OTP_BASE \ + ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x30000 : 0x14000) +#define AR9300_OTP_STATUS \ + ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x30018 : 0x15f18) #define AR9300_OTP_STATUS_TYPE 0x7 #define AR9300_OTP_STATUS_VALID 0x4 #define AR9300_OTP_STATUS_ACCESS_BUSY 0x2 #define AR9300_OTP_STATUS_SM_BUSY 0x1 -#define AR9300_OTP_READ_DATA (AR_SREV_9340(ah) ? 0x3001c : 0x15f1c) +#define AR9300_OTP_READ_DATA \ + ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x3001c : 0x15f1c) enum targetPowerHTRates { HT_TARGET_RATE_0_8_16, -- cgit v0.10.2 From f28c42c576b293b3a1daaed8ca2775ebc2fe5398 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Fri, 24 May 2013 14:29:20 +0800 Subject: usb: dwc3: pci: PHY should be deleted later than dwc3 core If the glue layer is removed first (core layer later), it deletes the phy device first, then the core device. But at core's removal, it still uses PHY's resources, it may cause kernel's oops. It is much like the problem Paul Zimmerman reported at: http://marc.info/?l=linux-usb&m=136547502011472&w=2. Besides, it is reasonable the PHY is deleted at last as the controller is the PHY's user. Signed-off-by: Peter Chen Cc: Signed-off-by: Felipe Balbi diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 227d4a7..eba9e2b 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -196,9 +196,9 @@ static void dwc3_pci_remove(struct pci_dev *pci) { struct dwc3_pci *glue = pci_get_drvdata(pci); + platform_device_unregister(glue->dwc3); platform_device_unregister(glue->usb2_phy); platform_device_unregister(glue->usb3_phy); - platform_device_unregister(glue->dwc3); pci_set_drvdata(pci, NULL); pci_disable_device(pci); } -- cgit v0.10.2 From 022d0547aa8b00ff5035ba6207ebc2c08ea0a51f Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Fri, 24 May 2013 14:30:16 +0800 Subject: usb: dwc3: exynos: PHY should be deleted later than dwc3 core If the glue layer is removed first (core layer later), it deletes the phy device first, then the core device. But at core's removal, it still uses PHY's resources, it may cause kernel's oops. It is much like the problem Paul Zimmerman reported at: http://marc.info/?l=linux-usb&m=136547502011472&w=2. Besides, it is reasonable the PHY is deleted at last as the controller is the PHY's user. Signed-off-by: Peter Chen Cc: Signed-off-by: Felipe Balbi diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index 929e7dd..8ce9d7f 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -164,9 +164,9 @@ static int dwc3_exynos_remove(struct platform_device *pdev) { struct dwc3_exynos *exynos = platform_get_drvdata(pdev); + device_for_each_child(&pdev->dev, NULL, dwc3_exynos_remove_child); platform_device_unregister(exynos->usb2_phy); platform_device_unregister(exynos->usb3_phy); - device_for_each_child(&pdev->dev, NULL, dwc3_exynos_remove_child); clk_disable_unprepare(exynos->clk); -- cgit v0.10.2 From 5bf8fae33d14cc5c3c53a926f9079f92c8b082b0 Mon Sep 17 00:00:00 2001 From: George Cherian Date: Mon, 27 May 2013 14:35:49 +0530 Subject: usb: dwc3: gadget: free trb pool only from epnum 2 we never allocate a TRB pool for physical endpoints 0 and 1 so trying to free it (a invalid TRB pool pointer) will lead us in a warning while removing dwc3.ko module. In order to fix the situation, all we have to do is skip dwc3_free_trb_pool() for physical endpoints 0 and 1 just as we while deleting endpoints from the endpoints list. Cc: stable@vger.kernel.org Signed-off-by: George Cherian Signed-off-by: Felipe Balbi diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 2b6e7e0..b5e5b35 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1706,11 +1706,19 @@ static void dwc3_gadget_free_endpoints(struct dwc3 *dwc) dep = dwc->eps[epnum]; if (!dep) continue; - - dwc3_free_trb_pool(dep); - - if (epnum != 0 && epnum != 1) + /* + * Physical endpoints 0 and 1 are special; they form the + * bi-directional USB endpoint 0. + * + * For those two physical endpoints, we don't allocate a TRB + * pool nor do we add them the endpoints list. Due to that, we + * shouldn't do these two operations otherwise we would end up + * with all sorts of bugs when removing dwc3.ko. + */ + if (epnum != 0 && epnum != 1) { + dwc3_free_trb_pool(dep); list_del(&dep->endpoint.ep_list); + } kfree(dep); } -- cgit v0.10.2 From ed74df12dc3e07a37d99aab60211496e871488a0 Mon Sep 17 00:00:00 2001 From: Virupax Sadashivpetimath Date: Wed, 24 Apr 2013 08:38:48 +0200 Subject: usb: musb: make use_sg flag URB specific Since highmem PIO URB handling was introduced in: 8e8a551 usb: musb: host: Handle highmem in PIO mode when a URB is being handled it may happen that the static use_sg flag was set by a previous URB with buffer in highmem. This leads to error in handling the present URB. Fix this by making the use_sg flag URB specific. Cc: stable # 3.7+ Acked-by: Linus Walleij Signed-off-by: Virupax Sadashivpetimath Signed-off-by: Fabio Baltieri Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 8914dec..9d3044b 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1232,7 +1232,6 @@ void musb_host_tx(struct musb *musb, u8 epnum) void __iomem *mbase = musb->mregs; struct dma_channel *dma; bool transfer_pending = false; - static bool use_sg; musb_ep_select(mbase, epnum); tx_csr = musb_readw(epio, MUSB_TXCSR); @@ -1463,9 +1462,9 @@ done: * NULL. */ if (!urb->transfer_buffer) - use_sg = true; + qh->use_sg = true; - if (use_sg) { + if (qh->use_sg) { /* sg_miter_start is already done in musb_ep_program */ if (!sg_miter_next(&qh->sg_miter)) { dev_err(musb->controller, "error: sg list empty\n"); @@ -1484,9 +1483,9 @@ done: qh->segsize = length; - if (use_sg) { + if (qh->use_sg) { if (offset + length >= urb->transfer_buffer_length) - use_sg = false; + qh->use_sg = false; } musb_ep_select(mbase, epnum); @@ -1552,7 +1551,6 @@ void musb_host_rx(struct musb *musb, u8 epnum) bool done = false; u32 status; struct dma_channel *dma; - static bool use_sg; unsigned int sg_flags = SG_MITER_ATOMIC | SG_MITER_TO_SG; musb_ep_select(mbase, epnum); @@ -1878,12 +1876,12 @@ void musb_host_rx(struct musb *musb, u8 epnum) * NULL. */ if (!urb->transfer_buffer) { - use_sg = true; + qh->use_sg = true; sg_miter_start(&qh->sg_miter, urb->sg, 1, sg_flags); } - if (use_sg) { + if (qh->use_sg) { if (!sg_miter_next(&qh->sg_miter)) { dev_err(musb->controller, "error: sg list empty\n"); sg_miter_stop(&qh->sg_miter); @@ -1913,8 +1911,8 @@ finish: urb->actual_length += xfer_len; qh->offset += xfer_len; if (done) { - if (use_sg) - use_sg = false; + if (qh->use_sg) + qh->use_sg = false; if (urb->status == -EINPROGRESS) urb->status = status; diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h index 5a9c8fe..738f7eb 100644 --- a/drivers/usb/musb/musb_host.h +++ b/drivers/usb/musb/musb_host.h @@ -74,6 +74,7 @@ struct musb_qh { u16 frame; /* for periodic schedule */ unsigned iso_idx; /* in urb->iso_frame_desc[] */ struct sg_mapping_iter sg_miter; /* for highmem in PIO mode */ + bool use_sg; /* to track urb using sglist */ }; /* map from control or bulk queue head to the first qh on that ring */ -- cgit v0.10.2 From aa848233f740abbabfa7669daca0ab94aaa37bcd Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 3 May 2013 23:27:07 +0200 Subject: ntp: Remove unused variable flags in __hardpps MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit kernel/time/ntp.c: In function ‘__hardpps’: kernel/time/ntp.c:877: warning: unused variable ‘flags’ commit a076b2146fabb0894cae5e0189a8ba3f1502d737 ("ntp: Remove ntp_lock, using the timekeeping locks to protect ntp state") removed its users, but not the actual variable. Signed-off-by: Geert Uytterhoeven Signed-off-by: John Stultz diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c index 12ff13a..8f5b3b9 100644 --- a/kernel/time/ntp.c +++ b/kernel/time/ntp.c @@ -874,7 +874,6 @@ static void hardpps_update_phase(long error) void __hardpps(const struct timespec *phase_ts, const struct timespec *raw_ts) { struct pps_normtime pts_norm, freq_norm; - unsigned long flags; pts_norm = pps_normalize_ts(*phase_ts); -- cgit v0.10.2 From 0d6bd9953f739dad96d9a0de65383e479ab4e10d Mon Sep 17 00:00:00 2001 From: Zoran Markovic Date: Fri, 17 May 2013 11:24:05 -0700 Subject: timekeeping: Correct run-time detection of persistent_clock. Since commit 31ade30692dc9680bfc95700d794818fa3f754ac, timekeeping_init() checks for presence of persistent clock by attempting to read a non-zero time value. This is an issue on platforms where persistent_clock (instead is implemented as a free-running counter (instead of an RTC) starting from zero on each boot and running during suspend. Examples are some ARM platforms (e.g. PandaBoard). An attempt to read such a clock during timekeeping_init() may return zero value and falsely declare persistent clock as missing. Additionally, in the above case suspend times may be accounted twice (once from timekeeping_resume() and once from rtc_resume()), resulting in a gradual drift of system time. This patch does a run-time correction of the issue by doing the same check during timekeeping_suspend(). A better long-term solution would have to return error when trying to read non-existing clock and zero when trying to read an uninitialized clock, but that would require changing all persistent_clock implementations. This patch addresses the immediate breakage, for now. Cc: John Stultz Cc: Thomas Gleixner Cc: Feng Tang Cc: stable@vger.kernel.org Signed-off-by: Zoran Markovic [jstultz: Tweaked commit message and subject] Signed-off-by: John Stultz diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 98cd470..baeeb5c 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -975,6 +975,14 @@ static int timekeeping_suspend(void) read_persistent_clock(&timekeeping_suspend_time); + /* + * On some systems the persistent_clock can not be detected at + * timekeeping_init by its return value, so if we see a valid + * value returned, update the persistent_clock_exists flag. + */ + if (timekeeping_suspend_time.tv_sec || timekeeping_suspend_time.tv_nsec) + persistent_clock_exist = true; + raw_spin_lock_irqsave(&timekeeper_lock, flags); write_seqcount_begin(&timekeeper_seq); timekeeping_forward_now(tk); -- cgit v0.10.2 From cf9f123b38345b2c2777e642eb9bb561f4b7de91 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 28 May 2013 16:46:46 -0400 Subject: NVMe: Use dma_set_mask() correctly In some circumstances setting a 64-bit DMA mask can fail, as explained in Documentation/DMA-API-HOWTO.txt. Use the recommended code sequence to set a 32-bit DMA mask if setting a 64-bit DMA mask fails. Reported-by: Chayan Biswas Signed-off-by: Matthew Wilcox diff --git a/drivers/block/nvme-core.c b/drivers/block/nvme-core.c index 8493708..a57d3bc 100644 --- a/drivers/block/nvme-core.c +++ b/drivers/block/nvme-core.c @@ -1927,8 +1927,14 @@ static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id) INIT_LIST_HEAD(&dev->namespaces); dev->pci_dev = pdev; pci_set_drvdata(pdev, dev); - dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); - dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); + + if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) + dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); + else if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) + dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + else + goto disable; + result = nvme_set_instance(dev); if (result) goto disable; -- cgit v0.10.2 From b161c144404c18f6a9e20e46b63828ae3c2eb093 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Fri, 24 May 2013 09:47:49 -0400 Subject: svcrpc: implement O_NONBLOCK behavior for use-gss-proxy Somebody noticed LTP was complaining about O_NONBLOCK opens of /proc/net/rpc/use-gss-proxy succeeding and then a following read hanging. I'm not convinced LTP really has any business opening random proc files and expecting them to behave a certain way. Maybe this isn't really a bug. But in any case the O_NONBLOCK behavior could be useful for someone that wants to test whether gss-proxy is up without waiting. Reported-by: Jan Stancek Signed-off-by: J. Bruce Fields diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c index 2c6a1ec..29b4ba9 100644 --- a/net/sunrpc/auth_gss/svcauth_gss.c +++ b/net/sunrpc/auth_gss/svcauth_gss.c @@ -1317,10 +1317,12 @@ static inline bool gssp_ready(struct sunrpc_net *sn) return false; } -static int wait_for_gss_proxy(struct net *net) +static int wait_for_gss_proxy(struct net *net, struct file *file) { struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); + if (file->f_flags & O_NONBLOCK && !gssp_ready(sn)) + return -EAGAIN; return wait_event_interruptible(sn->gssp_wq, gssp_ready(sn)); } @@ -1362,7 +1364,7 @@ static ssize_t read_gssp(struct file *file, char __user *buf, size_t len; int ret; - ret = wait_for_gss_proxy(net); + ret = wait_for_gss_proxy(net, file); if (ret) return ret; -- cgit v0.10.2 From e9d0626ed43a41a3fc526d1df06122b0d4eac174 Mon Sep 17 00:00:00 2001 From: Zhang Yanfei Date: Tue, 14 May 2013 14:48:58 +0800 Subject: x86-64, init: Fix a possible wraparound bug in switchover in head_64.S In head_64.S, a switchover has been used to handle kernel crossing 1G, 512G boundaries. And commit 8170e6bed465b4b0c7687f93e9948aca4358a33b x86, 64bit: Use a #PF handler to materialize early mappings on demand said: During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. But from the switchover code, when we set up the PUD table: 114 addq $4096, %rdx 115 movq %rdi, %rax 116 shrq $PUD_SHIFT, %rax 117 andl $(PTRS_PER_PUD-1), %eax 118 movq %rdx, (4096+0)(%rbx,%rax,8) 119 movq %rdx, (4096+8)(%rbx,%rax,8) It seems line 119 has a potential bug there. For example, if the kernel is loaded at physical address 511G+1008M, that is 000000000 111111111 111111000 000000000000000000000 and the kernel _end is 512G+2M, that is 000000001 000000000 000000001 000000000000000000000 So in this example, when using the 2nd page to setup PUD (line 114~119), rax is 511. In line 118, we put rdx which is the address of the PMD page (the 3rd page) into entry 511 of the PUD table. But in line 119, the entry we calculate from (4096+8)(%rbx,%rax,8) has exceeded the PUD page. IMO, the entry in line 119 should be wraparound into entry 0 of the PUD table. The patch fixes the bug. Signed-off-by: Zhang Yanfei Link: http://lkml.kernel.org/r/5191DE5A.3020302@cn.fujitsu.com Signed-off-by: Yinghai Lu Cc: v3.9 Signed-off-by: H. Peter Anvin diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 08f7e80..321d65e 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -115,8 +115,10 @@ startup_64: movq %rdi, %rax shrq $PUD_SHIFT, %rax andl $(PTRS_PER_PUD-1), %eax - movq %rdx, (4096+0)(%rbx,%rax,8) - movq %rdx, (4096+8)(%rbx,%rax,8) + movq %rdx, 4096(%rbx,%rax,8) + incl %eax + andl $(PTRS_PER_PUD-1), %eax + movq %rdx, 4096(%rbx,%rax,8) addq $8192, %rbx movq %rdi, %rax -- cgit v0.10.2 From 2a0ff3fbe39bc93f719ff857e5a359d9780579ff Mon Sep 17 00:00:00 2001 From: Jeff Liu Date: Sun, 26 May 2013 21:33:09 +0800 Subject: cgroup: warn about mismatching options of a new mount of an existing hierarchy With the new __DEVEL__sane_behavior mount option was introduced, if the root cgroup is alive with no xattr function, to mount a new cgroup with xattr will be rejected in terms of design which just fine. However, if the root cgroup does not mounted with __DEVEL__sane_hehavior, to create a new cgroup with xattr option will succeed although after that the EA function does not works as expected but will get ENOTSUPP for setting up attributes under either cgroup. e.g. setfattr: /cgroup2/test: Operation not supported Instead of keeping silence in this case, it's better to drop a log entry in warning level. That would be helpful to understand the reason behind the scene from the user's perspective, and this is essentially an improvement does not break the backward compatibilities. With this fix, above mount attemption will keep up works as usual but the following line cound be found at the system log: [ ...] cgroup: new mount options do not match the existing superblock tj: minor formatting / message updates. Signed-off-by: Jie Liu Reported-by: Alexey Kodanev Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 31e9ef3..a7c9e6d 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -1686,11 +1686,14 @@ static struct dentry *cgroup_mount(struct file_system_type *fs_type, */ cgroup_drop_root(opts.new_root); - if (((root->flags | opts.flags) & CGRP_ROOT_SANE_BEHAVIOR) && - root->flags != opts.flags) { - pr_err("cgroup: sane_behavior: new mount options should match the existing superblock\n"); - ret = -EINVAL; - goto drop_new_super; + if (root->flags != opts.flags) { + if ((root->flags | opts.flags) & CGRP_ROOT_SANE_BEHAVIOR) { + pr_err("cgroup: sane_behavior: new mount options should match the existing superblock\n"); + ret = -EINVAL; + goto drop_new_super; + } else { + pr_warning("cgroup: new mount options do not match the existing superblock, will be ignored\n"); + } } /* no subsys rebinding, so refcounts don't change */ -- cgit v0.10.2 From da9d0fbf5e9aa47492a19588bd0efd18d6d172e0 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Thu, 9 May 2013 13:58:19 -0700 Subject: ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson Reviewed-by: Doug Anderson Tested-by: Tushar Behera Acked-by: Kukjin Kim diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index e40b435..227abf9 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -1,4 +1,4 @@ -CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BLK_DEV_INITRD=y @@ -7,17 +7,18 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y -CONFIG_EFI_PARTITION=y CONFIG_ARCH_EXYNOS=y -CONFIG_S3C_LOWLEVEL_UART_PORT=1 +CONFIG_S3C_LOWLEVEL_UART_PORT=3 CONFIG_S3C24XX_PWM=y CONFIG_ARCH_EXYNOS5=y CONFIG_MACH_EXYNOS4_DT=y -CONFIG_MACH_EXYNOS5_DT=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PREEMPT=y CONFIG_AEABI=y +CONFIG_HIGHMEM=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M" @@ -30,35 +31,58 @@ CONFIG_NET_KEY=y CONFIG_INET=y CONFIG_RFKILL_REGULATOR=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y +CONFIG_MD=y +CONFIG_BLK_DEV_DM=y +CONFIG_DM_CRYPT=m CONFIG_NETDEVICES=y CONFIG_SMSC911X=y CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set +CONFIG_KEYBOARD_CROS_EC=y +# CONFIG_MOUSE_PS2 is not set +CONFIG_MOUSE_CYAPA=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_SAMSUNG=y CONFIG_SERIAL_SAMSUNG_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_HW_RANDOM=y +CONFIG_TCG_TPM=y +CONFIG_TCG_TIS_I2C_INFINEON=y CONFIG_I2C=y +CONFIG_I2C_MUX=y +CONFIG_I2C_ARB_GPIO_CHALLENGE=y +CONFIG_I2C_S3C2410=y +CONFIG_DEBUG_GPIO=y # CONFIG_HWMON is not set +CONFIG_MFD_CROS_EC=y +CONFIG_MFD_CROS_EC_I2C=y +CONFIG_MFD_MAX77686=y +CONFIG_MFD_MAX8997=y +CONFIG_MFD_SEC_CORE=y CONFIG_MFD_TPS65090=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_MAX8997=y +CONFIG_REGULATOR_MAX77686=y +CONFIG_REGULATOR_S5M8767=y CONFIG_REGULATOR_TPS65090=y CONFIG_FB=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_SIMPLE=y CONFIG_EXYNOS_VIDEO=y CONFIG_EXYNOS_MIPI_DSI=y CONFIG_EXYNOS_DP=y @@ -67,6 +91,20 @@ CONFIG_FONTS=y CONFIG_FONT_7x14=y CONFIG_LOGO=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_S5P=y +CONFIG_USB_STORAGE=y +CONFIG_USB_DWC3=y +CONFIG_USB_PHY=y +CONFIG_SAMSUNG_USB2PHY=y +CONFIG_SAMSUNG_USB3PHY=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_S3C=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_IDMAC=y +CONFIG_MMC_DW_EXYNOS=y +CONFIG_COMMON_CLK_MAX77686=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y @@ -79,6 +117,7 @@ CONFIG_ROMFS_FS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y +CONFIG_PRINTK_TIME=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y @@ -87,6 +126,5 @@ CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -CONFIG_EARLY_PRINTK=y +CONFIG_CRYPTO_SHA256=y CONFIG_CRC_CCITT=y -- cgit v0.10.2 From fcce9a35f8faaa1f52236c554ef1b15d99a7537e Mon Sep 17 00:00:00 2001 From: George Spelvin Date: Wed, 29 May 2013 10:20:35 +0900 Subject: ahci: add an observed PCI ID for Marvell 88se9172 SATA controller A third possible PCI ID, as personally observed, and found in the pci.ids list. Signed-off-by: George Spelvin Signed-off-by: Tejun Heo diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 2180876..2b50dfd 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -423,6 +423,8 @@ static const struct pci_device_id ahci_pci_tbl[] = { .driver_data = board_ahci_yes_fbs }, /* 88se9125 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x917a), .driver_data = board_ahci_yes_fbs }, /* 88se9172 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9172), + .driver_data = board_ahci_yes_fbs }, /* 88se9172 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9192), .driver_data = board_ahci_yes_fbs }, /* 88se9172 on some Gigabyte */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x91a3), -- cgit v0.10.2 From fdc03438f53a00294ed9939eb3a1f6db6f3d8963 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 28 May 2013 14:03:10 -0400 Subject: USB: revert periodic scheduling bugfix This patch reverts commit 3e619d04159be54b3daa0b7036b0ce9e067f4b5d (USB: EHCI: fix bug in scheduling periodic split transfers). The commit was valid -- it fixed a real bug -- but the periodic scheduler in ehci-hcd is in such bad shape (especially the part that handles split transactions) that fixing one bug is very likely to cause another to surface. That's what happened in this case; the result was choppy and noisy playback on certain 24-bit audio devices. The only real fix will be to rewrite this entire section of code. My next project... This fixes https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1136110. Thanks to Tim Richardson for extra testing and feedback, and to Joseph Salisbury and Tyson Tan for tracking down the original source of the problem. Signed-off-by: Alan Stern CC: Joseph Salisbury CC: Tim Richardson Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index acff5b8..f3c1028 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -213,7 +213,7 @@ static inline unsigned char tt_start_uframe(struct ehci_hcd *ehci, __hc32 mask) } static const unsigned char -max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 125, 25 }; +max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 30, 0 }; /* carryover low/fullspeed bandwidth that crosses uframe boundries */ static inline void carryover_tt_bandwidth(unsigned short tt_usecs[8]) -- cgit v0.10.2 From 5f8e2c07d75967ee49a5da1d21ddf5f50d48cda0 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 27 May 2013 14:44:37 +0200 Subject: USB: serial: fix Treo/Kyocera interrrupt-in urb context The first and second interrupt-in urbs are swapped for some Treo/Kyocera devices, but the urb context was never updated with the new port. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 7573ec8..8d1a3e6 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -564,6 +564,7 @@ static int treo_attach(struct usb_serial *serial) dest->bulk_in_endpointAddress = src->bulk_in_endpointAddress;\ dest->bulk_in_buffer = src->bulk_in_buffer; \ dest->interrupt_in_urb = src->interrupt_in_urb; \ + dest->interrupt_in_urb->context = dest; \ dest->interrupt_in_endpointAddress = \ src->interrupt_in_endpointAddress;\ dest->interrupt_in_buffer = src->interrupt_in_buffer; \ -- cgit v0.10.2 From 420021a395ce38b7ab2cceb52dee4038be7d8fa3 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 27 May 2013 14:44:38 +0200 Subject: USB: visor: fix initialisation of Treo/Kyocera devices Fix regression introduced by commit 214916f2e ("USB: visor: reimplement using generic framework") which broke initialisation of Treo/Kyocera devices that re-mapped bulk-in endpoints. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 8d1a3e6..9910aa2 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -560,9 +560,17 @@ static int treo_attach(struct usb_serial *serial) */ #define COPY_PORT(dest, src) \ do { \ + int i; \ + \ + for (i = 0; i < ARRAY_SIZE(src->read_urbs); ++i) { \ + dest->read_urbs[i] = src->read_urbs[i]; \ + dest->read_urbs[i]->context = dest; \ + dest->bulk_in_buffers[i] = src->bulk_in_buffers[i]; \ + } \ dest->read_urb = src->read_urb; \ dest->bulk_in_endpointAddress = src->bulk_in_endpointAddress;\ dest->bulk_in_buffer = src->bulk_in_buffer; \ + dest->bulk_in_size = src->bulk_in_size; \ dest->interrupt_in_urb = src->interrupt_in_urb; \ dest->interrupt_in_urb->context = dest; \ dest->interrupt_in_endpointAddress = \ -- cgit v0.10.2 From 72ea18a558ed7a63a50bb121ba60d73b5b38ae30 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 27 May 2013 14:44:39 +0200 Subject: USB: mos7720: fix DMA to stack The read_mos_reg function is called with stack-allocated buffers, which must not be used for control messages. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index cc0e543..7752cff 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -227,11 +227,22 @@ static int read_mos_reg(struct usb_serial *serial, unsigned int serial_portnum, __u8 requesttype = (__u8)0xc0; __u16 index = get_reg_index(reg); __u16 value = get_reg_value(reg, serial_portnum); - int status = usb_control_msg(usbdev, pipe, request, requesttype, value, - index, data, 1, MOS_WDR_TIMEOUT); - if (status < 0) + u8 *buf; + int status; + + buf = kmalloc(1, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + status = usb_control_msg(usbdev, pipe, request, requesttype, value, + index, buf, 1, MOS_WDR_TIMEOUT); + if (status == 1) + *data = *buf; + else if (status < 0) dev_err(&usbdev->dev, "mos7720: usb_control_msg() failed: %d", status); + kfree(buf); + return status; } -- cgit v0.10.2 From 15ee89c3347fbf58a4361011eda5ac2731e45126 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 27 May 2013 14:44:40 +0200 Subject: USB: mos7840: fix DMA to stack Fix regression introduced by commit 0eafe4de1a ("USB: serial: mos7840: add support for MCS7810 devices") which used stack-allocated buffers for control messages. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index a0d5ea5..7e99808 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -2142,13 +2142,21 @@ static int mos7840_ioctl(struct tty_struct *tty, static int mos7810_check(struct usb_serial *serial) { int i, pass_count = 0; + u8 *buf; __u16 data = 0, mcr_data = 0; __u16 test_pattern = 0x55AA; + int res; + + buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL); + if (!buf) + return 0; /* failed to identify 7810 */ /* Store MCR setting */ - usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), MCS_RDREQ, MCS_RD_RTYPE, 0x0300, MODEM_CONTROL_REGISTER, - &mcr_data, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + buf, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + if (res == VENDOR_READ_LENGTH) + mcr_data = *buf; for (i = 0; i < 16; i++) { /* Send the 1-bit test pattern out to MCS7810 test pin */ @@ -2158,9 +2166,12 @@ static int mos7810_check(struct usb_serial *serial) MODEM_CONTROL_REGISTER, NULL, 0, MOS_WDR_TIMEOUT); /* Read the test pattern back */ - usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), - MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data, - VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + res = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), MCS_RDREQ, + MCS_RD_RTYPE, 0, GPIO_REGISTER, buf, + VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + if (res == VENDOR_READ_LENGTH) + data = *buf; /* If this is a MCS7810 device, both test patterns must match */ if (((test_pattern >> i) ^ (~data >> 1)) & 0x0001) @@ -2174,6 +2185,8 @@ static int mos7810_check(struct usb_serial *serial) MCS_WR_RTYPE, 0x0300 | mcr_data, MODEM_CONTROL_REGISTER, NULL, 0, MOS_WDR_TIMEOUT); + kfree(buf); + if (pass_count == 16) return 1; @@ -2183,11 +2196,17 @@ static int mos7810_check(struct usb_serial *serial) static int mos7840_calc_num_ports(struct usb_serial *serial) { __u16 data = 0x00; + u8 *buf; int mos7840_num_ports; - usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), - MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data, - VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + buf = kzalloc(VENDOR_READ_LENGTH, GFP_KERNEL); + if (buf) { + usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, buf, + VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + data = *buf; + kfree(buf); + } if (serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7810 || serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7820) { -- cgit v0.10.2 From 634371911730a462626071065b64cd6e1fe213e0 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 27 May 2013 14:44:41 +0200 Subject: USB: ark3116: fix control-message timeout The control-message timeout is specified in milliseconds and should not depend on HZ. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 3b16118..40e7fd9 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -43,7 +43,7 @@ #define DRIVER_NAME "ark3116" /* usb timeout of 1 second */ -#define ARK_TIMEOUT (1*HZ) +#define ARK_TIMEOUT 1000 static const struct usb_device_id id_table[] = { { USB_DEVICE(0x6547, 0x0232) }, -- cgit v0.10.2 From 6c13ff68a7ce01da7a51b44241a7aad8eaaedde7 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 27 May 2013 14:44:42 +0200 Subject: USB: iuu_phoenix: fix bulk-message timeout The bulk-message timeout is specified in milliseconds and should not depend on HZ. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 9d74c27..790673e 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -287,7 +287,7 @@ static int bulk_immediate(struct usb_serial_port *port, u8 *buf, u8 count) usb_bulk_msg(serial->dev, usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress), buf, - count, &actual, HZ * 1); + count, &actual, 1000); if (status != IUU_OPERATION_OK) dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status); @@ -307,7 +307,7 @@ static int read_immediate(struct usb_serial_port *port, u8 *buf, u8 count) usb_bulk_msg(serial->dev, usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress), buf, - count, &actual, HZ * 1); + count, &actual, 1000); if (status != IUU_OPERATION_OK) dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status); -- cgit v0.10.2 From 849513a7809175420d353625b6f651d961e99d49 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 27 May 2013 14:44:43 +0200 Subject: USB: mos7720: fix message timeouts The control and bulk-message timeouts are specified in milliseconds and should not depend on HZ. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 7752cff..6eac266 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -40,7 +40,7 @@ #define DRIVER_DESC "Moschip USB Serial Driver" /* default urb timeout */ -#define MOS_WDR_TIMEOUT (HZ * 5) +#define MOS_WDR_TIMEOUT 5000 #define MOS_MAX_PORT 0x02 #define MOS_WRITE 0x0E @@ -1938,7 +1938,7 @@ static int mos7720_startup(struct usb_serial *serial) /* setting configuration feature to one */ usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ); + (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000); /* start the interrupt urb */ ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL); @@ -1981,7 +1981,7 @@ static void mos7720_release(struct usb_serial *serial) /* wait for synchronous usb calls to return */ if (mos_parport->msg_pending) wait_for_completion_timeout(&mos_parport->syncmsg_compl, - MOS_WDR_TIMEOUT); + msecs_to_jiffies(MOS_WDR_TIMEOUT)); parport_remove_port(mos_parport->pp); usb_set_serial_data(serial, NULL); -- cgit v0.10.2 From 5cbfa3acdcbf19e1d29cf3479ad8200d2e644e44 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 27 May 2013 14:44:44 +0200 Subject: USB: zte_ev: fix control-message timeouts The control-message timeout is specified in milliseconds and should not depend on HZ. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c index 39ee737..b9a88f2 100644 --- a/drivers/usb/serial/zte_ev.c +++ b/drivers/usb/serial/zte_ev.c @@ -53,7 +53,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0001, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); /* send 2st cmd and recieve data */ @@ -65,7 +65,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x21, 0xa1, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 3 cmd */ @@ -84,7 +84,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x20, 0x21, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 4 cmd */ @@ -95,7 +95,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0003, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); /* send 5 cmd */ @@ -107,7 +107,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x21, 0xa1, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 6 cmd */ @@ -126,7 +126,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x20, 0x21, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); kfree(buf); @@ -178,7 +178,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0002, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); /* send 2st ctl cmd(CTL 21 22 03 00 00 00 00 00 ) */ @@ -186,7 +186,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0003, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); /* send 3st cmd and recieve data */ @@ -198,7 +198,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x21, 0xa1, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 4 cmd */ @@ -217,7 +217,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x20, 0x21, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 5 cmd */ @@ -228,7 +228,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0003, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); /* send 6 cmd */ @@ -240,7 +240,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x21, 0xa1, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 7 cmd */ @@ -259,7 +259,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x20, 0x21, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 8 cmd */ @@ -270,7 +270,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0003, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); kfree(buf); -- cgit v0.10.2 From 12bcbe66d7b3cc9f9f86cd02f925666eaa3c2107 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 28 May 2013 14:38:42 -0400 Subject: rcu: Add _notrace variation of rcu_dereference_raw() and hlist_for_each_entry_rcu() As rcu_dereference_raw() under RCU debug config options can add quite a bit of checks, and that tracing uses rcu_dereference_raw(), these checks happen with the function tracer. The function tracer also happens to trace these debug checks too. This added overhead can livelock the system. Add a new interface to RCU for both rcu_dereference_raw_notrace() as well as hlist_for_each_entry_rcu_notrace() as the hlist iterator uses the rcu_dereference_raw() as well, and is used a bit with the function tracer. Link: http://lkml.kernel.org/r/20130528184209.304356745@goodmis.org Acked-by: Paul E. McKenney Signed-off-by: Steven Rostedt diff --git a/include/linux/rculist.h b/include/linux/rculist.h index 8089e35..f4b1001 100644 --- a/include/linux/rculist.h +++ b/include/linux/rculist.h @@ -461,6 +461,26 @@ static inline void hlist_add_after_rcu(struct hlist_node *prev, &(pos)->member)), typeof(*(pos)), member)) /** + * hlist_for_each_entry_rcu_notrace - iterate over rcu list of given type (for tracing) + * @pos: the type * to use as a loop cursor. + * @head: the head for your list. + * @member: the name of the hlist_node within the struct. + * + * This list-traversal primitive may safely run concurrently with + * the _rcu list-mutation primitives such as hlist_add_head_rcu() + * as long as the traversal is guarded by rcu_read_lock(). + * + * This is the same as hlist_for_each_entry_rcu() except that it does + * not do any RCU debugging or tracing. + */ +#define hlist_for_each_entry_rcu_notrace(pos, head, member) \ + for (pos = hlist_entry_safe (rcu_dereference_raw_notrace(hlist_first_rcu(head)),\ + typeof(*(pos)), member); \ + pos; \ + pos = hlist_entry_safe(rcu_dereference_raw_notrace(hlist_next_rcu(\ + &(pos)->member)), typeof(*(pos)), member)) + +/** * hlist_for_each_entry_rcu_bh - iterate over rcu list of given type * @pos: the type * to use as a loop cursor. * @head: the head for your list. diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 4ccd68e..ddcc782 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -640,6 +640,15 @@ static inline void rcu_preempt_sleep_check(void) #define rcu_dereference_raw(p) rcu_dereference_check(p, 1) /*@@@ needed? @@@*/ +/* + * The tracing infrastructure traces RCU (we want that), but unfortunately + * some of the RCU checks causes tracing to lock up the system. + * + * The tracing version of rcu_dereference_raw() must not call + * rcu_read_lock_held(). + */ +#define rcu_dereference_raw_notrace(p) __rcu_dereference_check((p), 1, __rcu) + /** * rcu_access_index() - fetch RCU index with no dereferencing * @p: The index to read -- cgit v0.10.2 From 1bb539ca36e21c2f4fce0865e11df384bc7b7656 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 28 May 2013 14:38:43 -0400 Subject: ftrace: Use the rcu _notrace variants for rcu_dereference_raw() and friends As rcu_dereference_raw() under RCU debug config options can add quite a bit of checks, and that tracing uses rcu_dereference_raw(), these checks happen with the function tracer. The function tracer also happens to trace these debug checks too. This added overhead can livelock the system. Have the function tracer use the new RCU _notrace equivalents that do not do the debug checks for RCU. Link: http://lkml.kernel.org/r/20130528184209.467603904@goodmis.org Acked-by: Paul E. McKenney Signed-off-by: Steven Rostedt diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index b549b0f..6c508ff 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -120,22 +120,22 @@ static void ftrace_ops_no_ops(unsigned long ip, unsigned long parent_ip); /* * Traverse the ftrace_global_list, invoking all entries. The reason that we - * can use rcu_dereference_raw() is that elements removed from this list + * can use rcu_dereference_raw_notrace() is that elements removed from this list * are simply leaked, so there is no need to interact with a grace-period - * mechanism. The rcu_dereference_raw() calls are needed to handle + * mechanism. The rcu_dereference_raw_notrace() calls are needed to handle * concurrent insertions into the ftrace_global_list. * * Silly Alpha and silly pointer-speculation compiler optimizations! */ #define do_for_each_ftrace_op(op, list) \ - op = rcu_dereference_raw(list); \ + op = rcu_dereference_raw_notrace(list); \ do /* * Optimized for just a single item in the list (as that is the normal case). */ #define while_for_each_ftrace_op(op) \ - while (likely(op = rcu_dereference_raw((op)->next)) && \ + while (likely(op = rcu_dereference_raw_notrace((op)->next)) && \ unlikely((op) != &ftrace_list_end)) static inline void ftrace_ops_init(struct ftrace_ops *ops) @@ -779,7 +779,7 @@ ftrace_find_profiled_func(struct ftrace_profile_stat *stat, unsigned long ip) if (hlist_empty(hhd)) return NULL; - hlist_for_each_entry_rcu(rec, hhd, node) { + hlist_for_each_entry_rcu_notrace(rec, hhd, node) { if (rec->ip == ip) return rec; } @@ -1165,7 +1165,7 @@ ftrace_lookup_ip(struct ftrace_hash *hash, unsigned long ip) hhd = &hash->buckets[key]; - hlist_for_each_entry_rcu(entry, hhd, hlist) { + hlist_for_each_entry_rcu_notrace(entry, hhd, hlist) { if (entry->ip == ip) return entry; } @@ -1422,8 +1422,8 @@ ftrace_ops_test(struct ftrace_ops *ops, unsigned long ip) struct ftrace_hash *notrace_hash; int ret; - filter_hash = rcu_dereference_raw(ops->filter_hash); - notrace_hash = rcu_dereference_raw(ops->notrace_hash); + filter_hash = rcu_dereference_raw_notrace(ops->filter_hash); + notrace_hash = rcu_dereference_raw_notrace(ops->notrace_hash); if ((ftrace_hash_empty(filter_hash) || ftrace_lookup_ip(filter_hash, ip)) && @@ -2920,7 +2920,7 @@ static void function_trace_probe_call(unsigned long ip, unsigned long parent_ip, * on the hash. rcu_read_lock is too dangerous here. */ preempt_disable_notrace(); - hlist_for_each_entry_rcu(entry, hhd, node) { + hlist_for_each_entry_rcu_notrace(entry, hhd, node) { if (entry->ip == ip) entry->ops->func(ip, parent_ip, &entry->data); } -- cgit v0.10.2 From 1be374a0518a288147c6a7398792583200a67261 Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Wed, 22 May 2013 14:07:44 -0700 Subject: net: Block MSG_CMSG_COMPAT in send(m)msg and recv(m)msg To: linux-kernel@vger.kernel.org Cc: x86@kernel.org, trinity@vger.kernel.org, Andy Lutomirski , netdev@vger.kernel.org, "David S. Miller" Subject: [PATCH 5/5] net: Block MSG_CMSG_COMPAT in send(m)msg and recv(m)msg MSG_CMSG_COMPAT is (AFAIK) not intended to be part of the API -- it's a hack that steals a bit to indicate to other networking code that a compat entry was used. So don't allow it from a non-compat syscall. This prevents an oops when running this code: int main() { int s; struct sockaddr_in addr; struct msghdr *hdr; char *highpage = mmap((void*)(TASK_SIZE_MAX - 4096), 4096, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS | MAP_FIXED, -1, 0); if (highpage == MAP_FAILED) err(1, "mmap"); s = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP); if (s == -1) err(1, "socket"); addr.sin_family = AF_INET; addr.sin_port = htons(1); addr.sin_addr.s_addr = htonl(INADDR_LOOPBACK); if (connect(s, (struct sockaddr*)&addr, sizeof(addr)) != 0) err(1, "connect"); void *evil = highpage + 4096 - COMPAT_MSGHDR_SIZE; printf("Evil address is %p\n", evil); if (syscall(__NR_sendmmsg, s, evil, 1, MSG_CMSG_COMPAT) < 0) err(1, "sendmmsg"); return 0; } Cc: David S. Miller Signed-off-by: Andy Lutomirski Signed-off-by: David S. Miller diff --git a/net/socket.c b/net/socket.c index 6b94633..9ff6366 100644 --- a/net/socket.c +++ b/net/socket.c @@ -2075,8 +2075,12 @@ SYSCALL_DEFINE3(sendmsg, int, fd, struct msghdr __user *, msg, unsigned int, fla { int fput_needed, err; struct msghdr msg_sys; - struct socket *sock = sockfd_lookup_light(fd, &err, &fput_needed); + struct socket *sock; + + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; + sock = sockfd_lookup_light(fd, &err, &fput_needed); if (!sock) goto out; @@ -2149,6 +2153,8 @@ int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen, SYSCALL_DEFINE4(sendmmsg, int, fd, struct mmsghdr __user *, mmsg, unsigned int, vlen, unsigned int, flags) { + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; return __sys_sendmmsg(fd, mmsg, vlen, flags); } @@ -2249,8 +2255,12 @@ SYSCALL_DEFINE3(recvmsg, int, fd, struct msghdr __user *, msg, { int fput_needed, err; struct msghdr msg_sys; - struct socket *sock = sockfd_lookup_light(fd, &err, &fput_needed); + struct socket *sock; + + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; + sock = sockfd_lookup_light(fd, &err, &fput_needed); if (!sock) goto out; @@ -2375,6 +2385,9 @@ SYSCALL_DEFINE5(recvmmsg, int, fd, struct mmsghdr __user *, mmsg, int datagrams; struct timespec timeout_sys; + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; + if (!timeout) return __sys_recvmmsg(fd, mmsg, vlen, flags, NULL); @@ -2492,15 +2505,31 @@ SYSCALL_DEFINE2(socketcall, int, call, unsigned long __user *, args) (int __user *)a[4]); break; case SYS_SENDMSG: + if (a[2] & MSG_CMSG_COMPAT) { + err = -EINVAL; + break; + } err = sys_sendmsg(a0, (struct msghdr __user *)a1, a[2]); break; case SYS_SENDMMSG: + if (a[3] & MSG_CMSG_COMPAT) { + err = -EINVAL; + break; + } err = sys_sendmmsg(a0, (struct mmsghdr __user *)a1, a[2], a[3]); break; case SYS_RECVMSG: + if (a[2] & MSG_CMSG_COMPAT) { + err = -EINVAL; + break; + } err = sys_recvmsg(a0, (struct msghdr __user *)a1, a[2]); break; case SYS_RECVMMSG: + if (a[3] & MSG_CMSG_COMPAT) { + err = -EINVAL; + break; + } err = sys_recvmmsg(a0, (struct mmsghdr __user *)a1, a[2], a[3], (struct timespec __user *)a[4]); break; -- cgit v0.10.2 From cf6c31fc5c3de225348742c95cc6185fca20a2f2 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Mon, 29 Apr 2013 10:04:46 +1000 Subject: m68k: only use local gpio_request_one if not using GPIOLIB MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Compiling for targets that use the local gpio code (not GPIOLIB) fail to compile with: CC arch/m68k/platform/coldfire/device.o In file included from include/linux/gpio.h:45:0, from arch/m68k/platform/coldfire/device.c:15: /home/gerg/new-wave.git/linux-3.x/arch/m68k/include/asm/gpio.h:89:19: error: static declaration of ‘gpio_request_one’ follows non-static declaration include/asm-generic/gpio.h:195:12: note: previous declaration of ‘gpio_request_one’ was here Fix by conditionally using the local gpio_request_one() function based on !CONFIG_GPIOLIB. Signed-off-by: Greg Ungerer diff --git a/arch/m68k/include/asm/gpio.h b/arch/m68k/include/asm/gpio.h index 8cc8343..2f6eec1 100644 --- a/arch/m68k/include/asm/gpio.h +++ b/arch/m68k/include/asm/gpio.h @@ -86,6 +86,7 @@ static inline int gpio_cansleep(unsigned gpio) return gpio < MCFGPIO_PIN_MAX ? 0 : __gpio_cansleep(gpio); } +#ifndef CONFIG_GPIOLIB static inline int gpio_request_one(unsigned gpio, unsigned long flags, const char *label) { int err; @@ -105,5 +106,5 @@ static inline int gpio_request_one(unsigned gpio, unsigned long flags, const cha return err; } - +#endif /* !CONFIG_GPIOLIB */ #endif -- cgit v0.10.2 From 456db6a4d495f40777da6f1f32f62f13026f52db Mon Sep 17 00:00:00 2001 From: Federico Vaga Date: Tue, 28 May 2013 05:02:44 +0000 Subject: net/core/sock.c: add missing VSOCK string in af_family_*_key_strings The three arrays of strings: af_family_key_strings, af_family_slock_key_strings and af_family_clock_key_strings have not VSOCK's string Signed-off-by: Federico Vaga Signed-off-by: David S. Miller diff --git a/net/core/sock.c b/net/core/sock.c index 6ba327d..88868a9 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -210,7 +210,7 @@ static const char *const af_family_key_strings[AF_MAX+1] = { "sk_lock-AF_TIPC" , "sk_lock-AF_BLUETOOTH", "sk_lock-IUCV" , "sk_lock-AF_RXRPC" , "sk_lock-AF_ISDN" , "sk_lock-AF_PHONET" , "sk_lock-AF_IEEE802154", "sk_lock-AF_CAIF" , "sk_lock-AF_ALG" , - "sk_lock-AF_NFC" , "sk_lock-AF_MAX" + "sk_lock-AF_NFC" , "sk_lock-AF_VSOCK" , "sk_lock-AF_MAX" }; static const char *const af_family_slock_key_strings[AF_MAX+1] = { "slock-AF_UNSPEC", "slock-AF_UNIX" , "slock-AF_INET" , @@ -226,7 +226,7 @@ static const char *const af_family_slock_key_strings[AF_MAX+1] = { "slock-AF_TIPC" , "slock-AF_BLUETOOTH", "slock-AF_IUCV" , "slock-AF_RXRPC" , "slock-AF_ISDN" , "slock-AF_PHONET" , "slock-AF_IEEE802154", "slock-AF_CAIF" , "slock-AF_ALG" , - "slock-AF_NFC" , "slock-AF_MAX" + "slock-AF_NFC" , "slock-AF_VSOCK" ,"slock-AF_MAX" }; static const char *const af_family_clock_key_strings[AF_MAX+1] = { "clock-AF_UNSPEC", "clock-AF_UNIX" , "clock-AF_INET" , @@ -242,7 +242,7 @@ static const char *const af_family_clock_key_strings[AF_MAX+1] = { "clock-AF_TIPC" , "clock-AF_BLUETOOTH", "clock-AF_IUCV" , "clock-AF_RXRPC" , "clock-AF_ISDN" , "clock-AF_PHONET" , "clock-AF_IEEE802154", "clock-AF_CAIF" , "clock-AF_ALG" , - "clock-AF_NFC" , "clock-AF_MAX" + "clock-AF_NFC" , "clock-AF_VSOCK" , "clock-AF_MAX" }; /* -- cgit v0.10.2 From 8e6d91ae0917bf934ed86411148f79d904728d51 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Tue, 28 May 2013 18:32:11 +0000 Subject: tuntap: forbid changing mq flag for persistent device We currently allow changing the mq flag (IFF_MULTI_QUEUE) for a persistent device. This will result a mismatch between the number the queues in netdev and tuntap. This is because we only allocate a 1q netdevice when IFF_MULTI_QUEUE was not specified, so when we set the IFF_MULTI_QUEUE and try to attach more queues later, netif_set_real_num_tx_queues() may fail which result a single queue netdevice with multiple sockets attached. Solve this by disallowing changing the mq flag for persistent device. Bug was introduced by commit edfb6a148ce62e5e19354a1dcd9a34e00815c2a1 (tuntap: reduce memory using of queues). Reported-by: Sriram Narasimhan Cc: Michael S. Tsirkin Signed-off-by: Jason Wang Signed-off-by: David S. Miller diff --git a/drivers/net/tun.c b/drivers/net/tun.c index f042b03..89776c5 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1585,6 +1585,10 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) else return -EINVAL; + if (!!(ifr->ifr_flags & IFF_MULTI_QUEUE) != + !!(tun->flags & TUN_TAP_MQ)) + return -EINVAL; + if (tun_not_capable(tun)) return -EPERM; err = security_tun_dev_open(tun->security); -- cgit v0.10.2 From e2e2f0ea1c935edcf53feb4c4c8fdb4f86d57dd9 Mon Sep 17 00:00:00 2001 From: Federico Manzan Date: Fri, 24 May 2013 18:18:48 +0200 Subject: usbfs: Increase arbitrary limit for USB 3 isopkt length Increase the current arbitrary limit for isocronous packet size to a value large enough to account for USB 3.0 super bandwidth streams, bMaxBurst (0~15 allowed, 1~16 packets) bmAttributes (bit 1:0, mult 0~2, 1~3 packets) so the size max for one USB 3 isocronous transfer is 1024 byte * 16 * 3 = 49152 byte Acked-by: Alan Stern Signed-off-by: Federico Manzan Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index caefc80..c88c4fb 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1287,9 +1287,13 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, goto error; } for (totlen = u = 0; u < uurb->number_of_packets; u++) { - /* arbitrary limit, - * sufficient for USB 2.0 high-bandwidth iso */ - if (isopkt[u].length > 8192) { + /* + * arbitrary limit need for USB 3.0 + * bMaxBurst (0~15 allowed, 1~16 packets) + * bmAttributes (bit 1:0, mult 0~2, 1~3 packets) + * sizemax: 1024 * 16 * 3 = 49152 + */ + if (isopkt[u].length > 49152) { ret = -EINVAL; goto error; } -- cgit v0.10.2 From d660164d79b67f879db35a7d61e47d3b99bc714e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michal=20Kube=C4=8Dek?= Date: Tue, 28 May 2013 22:37:03 +0000 Subject: netfilter: xt_LOG: fix mark logging for IPv6 packets In dump_ipv6_packet(), the "recurse" parameter is zero only if dumping contents of a packet embedded into an ICMPv6 error message. Therefore we want to log packet mark if recurse is non-zero, not when it is zero. Signed-off-by: Michal Kubecek Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/xt_LOG.c b/net/netfilter/xt_LOG.c index 491c7d8..5ab2484 100644 --- a/net/netfilter/xt_LOG.c +++ b/net/netfilter/xt_LOG.c @@ -737,7 +737,7 @@ static void dump_ipv6_packet(struct sbuff *m, dump_sk_uid_gid(m, skb->sk); /* Max length: 16 "MARK=0xFFFFFFFF " */ - if (!recurse && skb->mark) + if (recurse && skb->mark) sb_add(m, "MARK=0x%x ", skb->mark); } -- cgit v0.10.2 From 2abb274629614bef4044a0b98ada42e977feadfd Mon Sep 17 00:00:00 2001 From: Aurelien Chartier Date: Tue, 28 May 2013 18:09:56 +0100 Subject: xenbus: delay xenbus frontend resume if xenstored is not running If the xenbus frontend is located in a domain running xenstored, the device resume is hanging because it is happening before the process resume. This patch adds extra logic to the resume code to check if we are the domain running xenstored and delay the resume if needed. Signed-off-by: Aurelien Chartier [Changes in v2: - Instead of bypassing the resume, process it in a workqueue] [Changes in v3: - Add a struct work in xenbus_device to avoid dynamic allocation - Several small code fixes] [Changes in v4: - Use a dedicated workqueue] [Changes in v5: - Move create_workqueue error handling to xenbus_frontend_dev_resume] Acked-by: Jan Beulich Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/xenbus/xenbus_probe_frontend.c b/drivers/xen/xenbus/xenbus_probe_frontend.c index 3159a37..a7e2507 100644 --- a/drivers/xen/xenbus/xenbus_probe_frontend.c +++ b/drivers/xen/xenbus/xenbus_probe_frontend.c @@ -29,6 +29,8 @@ #include "xenbus_probe.h" +static struct workqueue_struct *xenbus_frontend_wq; + /* device// => - */ static int frontend_bus_id(char bus_id[XEN_BUS_ID_SIZE], const char *nodename) { @@ -89,9 +91,40 @@ static void backend_changed(struct xenbus_watch *watch, xenbus_otherend_changed(watch, vec, len, 1); } +static void xenbus_frontend_delayed_resume(struct work_struct *w) +{ + struct xenbus_device *xdev = container_of(w, struct xenbus_device, work); + + xenbus_dev_resume(&xdev->dev); +} + +static int xenbus_frontend_dev_resume(struct device *dev) +{ + /* + * If xenstored is running in this domain, we cannot access the backend + * state at the moment, so we need to defer xenbus_dev_resume + */ + if (xen_store_domain_type == XS_LOCAL) { + struct xenbus_device *xdev = to_xenbus_device(dev); + + if (!xenbus_frontend_wq) { + pr_err("%s: no workqueue to process delayed resume\n", + xdev->nodename); + return -EFAULT; + } + + INIT_WORK(&xdev->work, xenbus_frontend_delayed_resume); + queue_work(xenbus_frontend_wq, &xdev->work); + + return 0; + } + + return xenbus_dev_resume(dev); +} + static const struct dev_pm_ops xenbus_pm_ops = { .suspend = xenbus_dev_suspend, - .resume = xenbus_dev_resume, + .resume = xenbus_frontend_dev_resume, .freeze = xenbus_dev_suspend, .thaw = xenbus_dev_cancel, .restore = xenbus_dev_resume, @@ -440,6 +473,8 @@ static int __init xenbus_probe_frontend_init(void) register_xenstore_notifier(&xenstore_notifier); + xenbus_frontend_wq = create_workqueue("xenbus_frontend"); + return 0; } subsys_initcall(xenbus_probe_frontend_init); diff --git a/include/xen/xenbus.h b/include/xen/xenbus.h index 0a7515c..569c07f 100644 --- a/include/xen/xenbus.h +++ b/include/xen/xenbus.h @@ -70,6 +70,7 @@ struct xenbus_device { struct device dev; enum xenbus_state state; struct completion down; + struct work_struct work; }; static inline struct xenbus_device *to_xenbus_device(struct device *dev) -- cgit v0.10.2 From 33c1174bae3ea8f420abce53cf8aded778987583 Mon Sep 17 00:00:00 2001 From: Aurelien Chartier Date: Tue, 28 May 2013 18:09:55 +0100 Subject: xenbus: save xenstore local status for later use Save the xenstore local status computed in xenbus_init. It can then be used later to check if xenstored is running in this domain. Signed-off-by: Aurelien Chartier [Changes in v4: - Change variable name to xen_store_domain_type] Reviewed-by: David Vrabel Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/xenbus/xenbus_comms.h b/drivers/xen/xenbus/xenbus_comms.h index c8abd3b..e74f9c1 100644 --- a/drivers/xen/xenbus/xenbus_comms.h +++ b/drivers/xen/xenbus/xenbus_comms.h @@ -45,6 +45,7 @@ int xb_wait_for_data_to_read(void); int xs_input_avail(void); extern struct xenstore_domain_interface *xen_store_interface; extern int xen_store_evtchn; +extern enum xenstore_init xen_store_domain_type; extern const struct file_operations xen_xenbus_fops; diff --git a/drivers/xen/xenbus/xenbus_probe.c b/drivers/xen/xenbus/xenbus_probe.c index 3325884..56cfaaa 100644 --- a/drivers/xen/xenbus/xenbus_probe.c +++ b/drivers/xen/xenbus/xenbus_probe.c @@ -69,6 +69,9 @@ EXPORT_SYMBOL_GPL(xen_store_evtchn); struct xenstore_domain_interface *xen_store_interface; EXPORT_SYMBOL_GPL(xen_store_interface); +enum xenstore_init xen_store_domain_type; +EXPORT_SYMBOL_GPL(xen_store_domain_type); + static unsigned long xen_store_mfn; static BLOCKING_NOTIFIER_HEAD(xenstore_chain); @@ -719,17 +722,11 @@ static int __init xenstored_local_init(void) return err; } -enum xenstore_init { - UNKNOWN, - PV, - HVM, - LOCAL, -}; static int __init xenbus_init(void) { int err = 0; - enum xenstore_init usage = UNKNOWN; uint64_t v = 0; + xen_store_domain_type = XS_UNKNOWN; if (!xen_domain()) return -ENODEV; @@ -737,29 +734,29 @@ static int __init xenbus_init(void) xenbus_ring_ops_init(); if (xen_pv_domain()) - usage = PV; + xen_store_domain_type = XS_PV; if (xen_hvm_domain()) - usage = HVM; + xen_store_domain_type = XS_HVM; if (xen_hvm_domain() && xen_initial_domain()) - usage = LOCAL; + xen_store_domain_type = XS_LOCAL; if (xen_pv_domain() && !xen_start_info->store_evtchn) - usage = LOCAL; + xen_store_domain_type = XS_LOCAL; if (xen_pv_domain() && xen_start_info->store_evtchn) xenstored_ready = 1; - switch (usage) { - case LOCAL: + switch (xen_store_domain_type) { + case XS_LOCAL: err = xenstored_local_init(); if (err) goto out_error; xen_store_interface = mfn_to_virt(xen_store_mfn); break; - case PV: + case XS_PV: xen_store_evtchn = xen_start_info->store_evtchn; xen_store_mfn = xen_start_info->store_mfn; xen_store_interface = mfn_to_virt(xen_store_mfn); break; - case HVM: + case XS_HVM: err = hvm_get_parameter(HVM_PARAM_STORE_EVTCHN, &v); if (err) goto out_error; diff --git a/drivers/xen/xenbus/xenbus_probe.h b/drivers/xen/xenbus/xenbus_probe.h index bb4f92e..146f857 100644 --- a/drivers/xen/xenbus/xenbus_probe.h +++ b/drivers/xen/xenbus/xenbus_probe.h @@ -47,6 +47,13 @@ struct xen_bus_type { struct bus_type bus; }; +enum xenstore_init { + XS_UNKNOWN, + XS_PV, + XS_HVM, + XS_LOCAL, +}; + extern struct device_attribute xenbus_dev_attrs[]; extern int xenbus_match(struct device *_dev, struct device_driver *_drv); -- cgit v0.10.2 From 1db01b4903639fcfaec213701a494fe3fb2c490b Mon Sep 17 00:00:00 2001 From: Stefan Bader Date: Wed, 8 May 2013 16:37:35 +0200 Subject: xen: Clean up apic ipi interface Commit f447d56d36af18c5104ff29dcb1327c0c0ac3634 introduced the implementation of the PV apic ipi interface. But there were some odd things (it seems none of which cause really any issue but maybe they should be cleaned up anyway): - xen_send_IPI_mask_allbutself (and by that xen_send_IPI_allbutself) ignore the passed in vector and only use the CALL_FUNCTION_SINGLE vector. While xen_send_IPI_all and xen_send_IPI_mask use the vector. - physflat_send_IPI_allbutself is declared unnecessarily. It is never used. This patch tries to clean up those things. Signed-off-by: Stefan Bader Signed-off-by: Konrad Rzeszutek Wilk diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 8ff3799..fb44426 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -576,24 +576,22 @@ void xen_send_IPI_mask_allbutself(const struct cpumask *mask, { unsigned cpu; unsigned int this_cpu = smp_processor_id(); + int xen_vector = xen_map_vector(vector); - if (!(num_online_cpus() > 1)) + if (!(num_online_cpus() > 1) || (xen_vector < 0)) return; for_each_cpu_and(cpu, mask, cpu_online_mask) { if (this_cpu == cpu) continue; - xen_smp_send_call_function_single_ipi(cpu); + xen_send_IPI_one(cpu, xen_vector); } } void xen_send_IPI_allbutself(int vector) { - int xen_vector = xen_map_vector(vector); - - if (xen_vector >= 0) - xen_send_IPI_mask_allbutself(cpu_online_mask, xen_vector); + xen_send_IPI_mask_allbutself(cpu_online_mask, vector); } static irqreturn_t xen_call_function_interrupt(int irq, void *dev_id) diff --git a/arch/x86/xen/smp.h b/arch/x86/xen/smp.h index 8981a76..c7c2d89 100644 --- a/arch/x86/xen/smp.h +++ b/arch/x86/xen/smp.h @@ -5,7 +5,6 @@ extern void xen_send_IPI_mask(const struct cpumask *mask, extern void xen_send_IPI_mask_allbutself(const struct cpumask *mask, int vector); extern void xen_send_IPI_allbutself(int vector); -extern void physflat_send_IPI_allbutself(int vector); extern void xen_send_IPI_all(int vector); extern void xen_send_IPI_self(int vector); -- cgit v0.10.2 From d69c0e3975e4955dd596c162d1628ba1dbb1eb45 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 29 May 2013 13:31:15 +0100 Subject: xen-pciback: more uses of cached MSI-X capability offset Signed-off-by: Jan Beulich Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/xen-pciback/pci_stub.c b/drivers/xen/xen-pciback/pci_stub.c index a2278ba..4e8ba38 100644 --- a/drivers/xen/xen-pciback/pci_stub.c +++ b/drivers/xen/xen-pciback/pci_stub.c @@ -106,7 +106,7 @@ static void pcistub_device_release(struct kref *kref) else pci_restore_state(dev); - if (pci_find_capability(dev, PCI_CAP_ID_MSIX)) { + if (dev->msix_cap) { struct physdev_pci_device ppdev = { .seg = pci_domain_nr(dev->bus), .bus = dev->bus->number, @@ -371,7 +371,7 @@ static int pcistub_init_device(struct pci_dev *dev) if (err) goto config_release; - if (pci_find_capability(dev, PCI_CAP_ID_MSIX)) { + if (dev->msix_cap) { struct physdev_pci_device ppdev = { .seg = pci_domain_nr(dev->bus), .bus = dev->bus->number, -- cgit v0.10.2 From 104529661b645295903c5007ae632d2dd4029254 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 16 May 2013 11:11:08 +0300 Subject: pktcdvd: silence static checker warning Static checkers complain about widening the binary "not" operations here because sectors are u64 and "(pd)->settings.size" is unsigned int. It unintentionally clears the high 32 bits of the sector. This means that the driver won't work for devices with over 2TB of space. Since this is a DVD drive, we're unlikely to reach that limit, but we may as well silence the warning. Signed-off-by: Dan Carpenter Signed-off-by: Jiri Kosina diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index 3c08983..f5d0ea1 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -83,7 +83,8 @@ #define MAX_SPEED 0xffff -#define ZONE(sector, pd) (((sector) + (pd)->offset) & ~((pd)->settings.size - 1)) +#define ZONE(sector, pd) (((sector) + (pd)->offset) & \ + ~(sector_t)((pd)->settings.size - 1)) static DEFINE_MUTEX(pktcdvd_mutex); static struct pktcdvd_device *pkt_devs[MAX_WRITERS]; -- cgit v0.10.2 From afe3c3fd5392b2f0066930abc5dbd3f4b14a0f13 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Fri, 24 May 2013 17:24:34 -0400 Subject: svcrpc: fix failures to handle -1 uid's and gid's As of f025adf191924e3a75ce80e130afcd2485b53bb8 "sunrpc: Properly decode kuids and kgids in RPC_AUTH_UNIX credentials" any rpc containing a -1 (0xffff) uid or gid would fail with a badcred error. Reported symptoms were xmbc clients failing on upgrade of the NFS server; examination of the network trace showed them sending -1 as the gid. Reported-by: Julian Sikorski Tested-by: Julian Sikorski Cc: "Eric W. Biederman" Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields diff --git a/net/sunrpc/svcauth_unix.c b/net/sunrpc/svcauth_unix.c index c3f9e1e..06bdf5a 100644 --- a/net/sunrpc/svcauth_unix.c +++ b/net/sunrpc/svcauth_unix.c @@ -810,11 +810,15 @@ svcauth_unix_accept(struct svc_rqst *rqstp, __be32 *authp) goto badcred; argv->iov_base = (void*)((__be32*)argv->iov_base + slen); /* skip machname */ argv->iov_len -= slen*4; - + /* + * Note: we skip uid_valid()/gid_valid() checks here for + * backwards compatibility with clients that use -1 id's. + * Instead, -1 uid or gid is later mapped to the + * (export-specific) anonymous id by nfsd_setuser. + * Supplementary gid's will be left alone. + */ cred->cr_uid = make_kuid(&init_user_ns, svc_getnl(argv)); /* uid */ cred->cr_gid = make_kgid(&init_user_ns, svc_getnl(argv)); /* gid */ - if (!uid_valid(cred->cr_uid) || !gid_valid(cred->cr_gid)) - goto badcred; slen = svc_getnl(argv); /* gids length */ if (slen > 16 || (len -= (slen + 2)*4) < 0) goto badcred; @@ -823,8 +827,6 @@ svcauth_unix_accept(struct svc_rqst *rqstp, __be32 *authp) return SVC_CLOSE; for (i = 0; i < slen; i++) { kgid_t kgid = make_kgid(&init_user_ns, svc_getnl(argv)); - if (!gid_valid(kgid)) - goto badcred; GROUP_AT(cred->cr_group_info, i) = kgid; } if (svc_getu32(argv) != htonl(RPC_AUTH_NULL) || svc_getu32(argv) != 0) { -- cgit v0.10.2 From 27b0705c68dab67a6c8ffa19869aeca3eaf75d78 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Tue, 21 May 2013 17:14:18 +0200 Subject: drm/radeon: UVD block on SUMO2 is the same as on SUMO MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The chip id for SUMO2 isn't used. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=63935 Tested-By: Dave Witbrodt Signed-off-by: Christian König Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 83f612a..3fc2985 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -862,10 +862,8 @@ int rv770_uvd_resume(struct radeon_device *rdev) chip_id = 0x0100000b; break; case CHIP_SUMO: - chip_id = 0x0100000c; - break; case CHIP_SUMO2: - chip_id = 0x0100000d; + chip_id = 0x0100000c; break; case CHIP_PALM: chip_id = 0x0100000e; -- cgit v0.10.2 From 468ef1a58c9268ac9709350bf95eaf1c22a69f29 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 21 May 2013 13:35:19 -0400 Subject: drm/radeon: fix typo in cu_per_sh on verde Should be 5 rather than 2. Noticed by sroland and glisse on IRC. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index 5ffade6..d1ba9d8 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -2616,7 +2616,7 @@ static void si_gpu_init(struct radeon_device *rdev) default: rdev->config.si.max_shader_engines = 1; rdev->config.si.max_tile_pipes = 4; - rdev->config.si.max_cu_per_sh = 2; + rdev->config.si.max_cu_per_sh = 5; rdev->config.si.max_sh_per_se = 2; rdev->config.si.max_backends_per_se = 4; rdev->config.si.max_texture_channel_caches = 4; -- cgit v0.10.2 From 09fb8bd1a63b0f9f15e655c4fe8d047e5d2bf67a Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 22 May 2013 11:22:51 -0400 Subject: drm/radeon: fix card_posted check for newer asics MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Newer asics have variable numbers of crtcs. Use that rather than the asic family to determine which crtcs to check. This avoids checking non-existent crtcs or missing crtcs on certain asics. Reviewed-by: Michel Dänzer Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index c2c59fb..89cc816 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -472,18 +472,17 @@ bool radeon_card_posted(struct radeon_device *rdev) return false; /* first check CRTCs */ - if (ASIC_IS_DCE41(rdev)) { + if (ASIC_IS_DCE4(rdev)) { reg = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET) | RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET); - if (reg & EVERGREEN_CRTC_MASTER_EN) - return true; - } else if (ASIC_IS_DCE4(rdev)) { - reg = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET) | - RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET) | - RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET) | - RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET) | - RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET) | - RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET); + if (rdev->num_crtc >= 4) { + reg |= RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET) | + RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET); + } + if (rdev->num_crtc >= 6) { + reg |= RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET) | + RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET); + } if (reg & EVERGREEN_CRTC_MASTER_EN) return true; } else if (ASIC_IS_AVIVO(rdev)) { -- cgit v0.10.2 From 2cf3a4fcc64e5b54a8a3cd793c6c0024b5d8da6c Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 22 May 2013 11:30:34 -0400 Subject: drm/radeon: don't check crtcs in card_posted() on cards without DCE Skip checking crtcs in hardware without them. Avoids checking non-existent hardware. Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 89cc816..af82c9b 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -471,6 +471,9 @@ bool radeon_card_posted(struct radeon_device *rdev) rdev->pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE) return false; + if (ASIC_IS_NODCE(rdev)) + goto check_memsize; + /* first check CRTCs */ if (ASIC_IS_DCE4(rdev)) { reg = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET) | @@ -499,6 +502,7 @@ bool radeon_card_posted(struct radeon_device *rdev) } } +check_memsize: /* then check MEM_SIZE, in case the crtcs are off */ if (rdev->family >= CHIP_R600) reg = RREG32(R600_CONFIG_MEMSIZE); -- cgit v0.10.2 From a70b9641e6a90d6821e4354a2c2fede74015db29 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 29 May 2013 13:33:51 +0100 Subject: ipvs: ip_vs_sh: fix build kfree_rcu() requires offsetof(..., rcu_head) < 4096, which can get violated with a sufficiently high CONFIG_IP_VS_SH_TAB_BITS. Signed-off-by: Jan Beulich Signed-off-by: Simon Horman Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/ipvs/ip_vs_sh.c b/net/netfilter/ipvs/ip_vs_sh.c index 0df269d..a65edfe4 100644 --- a/net/netfilter/ipvs/ip_vs_sh.c +++ b/net/netfilter/ipvs/ip_vs_sh.c @@ -67,8 +67,8 @@ struct ip_vs_sh_bucket { #define IP_VS_SH_TAB_MASK (IP_VS_SH_TAB_SIZE - 1) struct ip_vs_sh_state { - struct ip_vs_sh_bucket buckets[IP_VS_SH_TAB_SIZE]; struct rcu_head rcu_head; + struct ip_vs_sh_bucket buckets[IP_VS_SH_TAB_SIZE]; }; /* -- cgit v0.10.2 From 50a583f64bfe53aae4996965c1d1b25d90ce4f64 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 22 May 2013 13:29:33 -0400 Subject: drm/radeon: narrow scope of Apple re-POST hack This narrows the scope of the apple re-POST hack added in: drm/radeon: re-POST the asic on Apple hardware when booted via EFI That patch prevents UVD from working on macs when booted in EFI mode. The original patch fixed macbook2,1 systems which were r5xx and hence have no UVD. Limit the hack to those systems to prevent UVD breakage on newer systems. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=63935 Cc: Matthew Garrett Signed-off-by: Alex Deucher Acked-by: Matthew Garrett diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index af82c9b..1899738 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -467,8 +467,10 @@ bool radeon_card_posted(struct radeon_device *rdev) { uint32_t reg; + /* required for EFI mode on macbook2,1 which uses an r5xx asic */ if (efi_enabled(EFI_BOOT) && - rdev->pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE) + (rdev->pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE) && + (rdev->family < CHIP_R600)) return false; if (ASIC_IS_NODCE(rdev)) -- cgit v0.10.2 From 7e0e41963740525af702bb23edede8ae9afc4ac0 Mon Sep 17 00:00:00 2001 From: Kleber Sacilotto de Souza Date: Fri, 3 May 2013 19:43:13 -0300 Subject: radeon: use max_bus_speed to activate gen2 speeds radeon currently uses a drm function to get the speed capabilities for the bus, drm_pcie_get_speed_cap_mask. However, this is a non-standard method of performing this detection and this patch changes it to use the max_bus_speed attribute. From: Lucas Kannebley Tavares Signed-off-by: Kleber Sacilotto de Souza Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 8f9e2d3..8546e3b 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -4999,8 +4999,7 @@ void evergreen_fini(struct radeon_device *rdev) void evergreen_pcie_gen2_enable(struct radeon_device *rdev) { - u32 link_width_cntl, speed_cntl, mask; - int ret; + u32 link_width_cntl, speed_cntl; if (radeon_pcie_gen2 == 0) return; @@ -5015,11 +5014,8 @@ void evergreen_pcie_gen2_enable(struct radeon_device *rdev) if (ASIC_IS_X2(rdev)) return; - ret = drm_pcie_get_speed_cap_mask(rdev->ddev, &mask); - if (ret != 0) - return; - - if (!(mask & DRM_PCIE_SPEED_50)) + if ((rdev->pdev->bus->max_bus_speed != PCIE_SPEED_5_0GT) && + (rdev->pdev->bus->max_bus_speed != PCIE_SPEED_8_0GT)) return; speed_cntl = RREG32_PCIE_PORT(PCIE_LC_SPEED_CNTL); diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 1a08008..b45e648 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -4631,8 +4631,6 @@ static void r600_pcie_gen2_enable(struct radeon_device *rdev) { u32 link_width_cntl, lanes, speed_cntl, training_cntl, tmp; u16 link_cntl2; - u32 mask; - int ret; if (radeon_pcie_gen2 == 0) return; @@ -4651,11 +4649,8 @@ static void r600_pcie_gen2_enable(struct radeon_device *rdev) if (rdev->family <= CHIP_R600) return; - ret = drm_pcie_get_speed_cap_mask(rdev->ddev, &mask); - if (ret != 0) - return; - - if (!(mask & DRM_PCIE_SPEED_50)) + if ((rdev->pdev->bus->max_bus_speed != PCIE_SPEED_5_0GT) && + (rdev->pdev->bus->max_bus_speed != PCIE_SPEED_8_0GT)) return; speed_cntl = RREG32_PCIE_PORT(PCIE_LC_SPEED_CNTL); diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 3fc2985..08aef24 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -2111,8 +2111,6 @@ static void rv770_pcie_gen2_enable(struct radeon_device *rdev) { u32 link_width_cntl, lanes, speed_cntl, tmp; u16 link_cntl2; - u32 mask; - int ret; if (radeon_pcie_gen2 == 0) return; @@ -2127,11 +2125,8 @@ static void rv770_pcie_gen2_enable(struct radeon_device *rdev) if (ASIC_IS_X2(rdev)) return; - ret = drm_pcie_get_speed_cap_mask(rdev->ddev, &mask); - if (ret != 0) - return; - - if (!(mask & DRM_PCIE_SPEED_50)) + if ((rdev->pdev->bus->max_bus_speed != PCIE_SPEED_5_0GT) && + (rdev->pdev->bus->max_bus_speed != PCIE_SPEED_8_0GT)) return; DRM_INFO("enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0\n"); -- cgit v0.10.2 From 8ac60a6866e58b861f2a15689c6513faf1602a3d Mon Sep 17 00:00:00 2001 From: Nicolas Schichan Date: Wed, 29 May 2013 20:01:19 +0200 Subject: ASoC: cs42l52: use correct PCM mixer TLV dB scale to match datasheet. Signed-off-by: Nicolas Schichan Acked-by: Brian Austin Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/cs42l52.c b/sound/soc/codecs/cs42l52.c index 030f53c..756c204 100644 --- a/sound/soc/codecs/cs42l52.c +++ b/sound/soc/codecs/cs42l52.c @@ -193,6 +193,8 @@ static DECLARE_TLV_DB_SCALE(mic_tlv, 1600, 100, 0); static DECLARE_TLV_DB_SCALE(pga_tlv, -600, 50, 0); +static DECLARE_TLV_DB_SCALE(mix_tlv, -50, 50, 0); + static const unsigned int limiter_tlv[] = { TLV_DB_RANGE_HEAD(2), 0, 2, TLV_DB_SCALE_ITEM(-3000, 600, 0), @@ -441,7 +443,7 @@ static const struct snd_kcontrol_new cs42l52_snd_controls[] = { SOC_DOUBLE_R_SX_TLV("PCM Mixer Volume", CS42L52_PCMA_MIXER_VOL, CS42L52_PCMB_MIXER_VOL, - 0, 0x7f, 0x19, hl_tlv), + 0, 0x7f, 0x19, mix_tlv), SOC_DOUBLE_R("PCM Mixer Switch", CS42L52_PCMA_MIXER_VOL, CS42L52_PCMB_MIXER_VOL, 7, 1, 1), -- cgit v0.10.2 From 7d8acf2cba81d7c64842b5dac0d7b3dae16f0378 Mon Sep 17 00:00:00 2001 From: Nicolas Schichan Date: Wed, 29 May 2013 20:01:20 +0200 Subject: ASoC: cs42l52: fix hp_gain_enum shift value. Signed-off-by: Nicolas Schichan Acked-by: Brian Austin Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/cs42l52.c b/sound/soc/codecs/cs42l52.c index 756c204..987f728 100644 --- a/sound/soc/codecs/cs42l52.c +++ b/sound/soc/codecs/cs42l52.c @@ -262,7 +262,7 @@ static const char * const hp_gain_num_text[] = { }; static const struct soc_enum hp_gain_enum = - SOC_ENUM_SINGLE(CS42L52_PB_CTL1, 4, + SOC_ENUM_SINGLE(CS42L52_PB_CTL1, 5, ARRAY_SIZE(hp_gain_num_text), hp_gain_num_text); static const char * const beep_pitch_text[] = { -- cgit v0.10.2 From dd4704480372fdbf3e8f7826274a883c4c7c335a Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 8 May 2013 14:29:03 +0100 Subject: clk: ux500: Provide device enumeration number suffix for SMSC911x First Ethernet device has a ".0" appended onto the device name. It appears that we need this in order to obtain the correct clock. Without this fix Ethernet does not function on Ux500 devices, which is a regression. Cc: Ulf Hansson Signed-off-by: Lee Jones Signed-off-by: Mike Turquette [mturquette@linaro.org: improved changelog] diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index 0b4f35a..80069c3 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -325,7 +325,7 @@ void u8500_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, clk = clk_reg_prcc_pclk("p3_pclk0", "per3clk", clkrst3_base, BIT(0), 0); clk_register_clkdev(clk, "fsmc", NULL); - clk_register_clkdev(clk, NULL, "smsc911x"); + clk_register_clkdev(clk, NULL, "smsc911x.0"); clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", clkrst3_base, BIT(1), 0); -- cgit v0.10.2 From f586938ba2cf83ed4cbebe96436220d182a7808e Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Tue, 30 Apr 2013 14:45:06 +0200 Subject: clk: ux500: clk-sysctrl: handle clocks with no parents Fix clk_reg_sysctrl() to set main clock registers of new struct clk_sysctrl even if the registered clock has no parents. This fixes an issue where "ulpclk" was registered with all clk->reg_* fields uninitialized, causing a -EINVAL error from clk_prepare(). Signed-off-by: Fabio Baltieri Acked-by: Ulf Hansson Signed-off-by: Mike Turquette diff --git a/drivers/clk/ux500/clk-sysctrl.c b/drivers/clk/ux500/clk-sysctrl.c index bc7e9bd..e364c9d 100644 --- a/drivers/clk/ux500/clk-sysctrl.c +++ b/drivers/clk/ux500/clk-sysctrl.c @@ -145,7 +145,13 @@ static struct clk *clk_reg_sysctrl(struct device *dev, return ERR_PTR(-ENOMEM); } - for (i = 0; i < num_parents; i++) { + /* set main clock registers */ + clk->reg_sel[0] = reg_sel[0]; + clk->reg_bits[0] = reg_bits[0]; + clk->reg_mask[0] = reg_mask[0]; + + /* handle clocks with more than one parent */ + for (i = 1; i < num_parents; i++) { clk->reg_sel[i] = reg_sel[i]; clk->reg_bits[i] = reg_bits[i]; clk->reg_mask[i] = reg_mask[i]; -- cgit v0.10.2 From 056f3d58db6f7d19be7dbc2aab8d049f28e20d6e Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 10 May 2013 18:38:09 +0200 Subject: clk: samsung: Add CLK_IGNORE_UNUSED flag for the sysreg clocks Currently no driver *) handles the sysreg clock, with an assumption that this clock is always left in its default state (enabled). Before commit 6e6aac7590f902d14d90bace3fd499 ARM: EXYNOS: Migrate clock support to common clock framework the sysreg clock was not even defined and hence wasn't handled explicitly in the kernel. To restore the previous behaviour disable masking the sysreg clock off in the clock core by default. *) Except the Exynos4x12 FIMC-IS driver, which will be modified to not touch the sysreg clock. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mike Turquette diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c index d0940e6..3c1f888 100644 --- a/drivers/clk/samsung/clk-exynos4.c +++ b/drivers/clk/samsung/clk-exynos4.c @@ -791,7 +791,8 @@ struct samsung_gate_clock exynos4210_gate_clks[] __initdata = { GATE(smmu_pcie, "smmu_pcie", "aclk133", GATE_IP_FSYS, 18, 0, 0), GATE(modemif, "modemif", "aclk100", GATE_IP_PERIL, 28, 0, 0), GATE(chipid, "chipid", "aclk100", E4210_GATE_IP_PERIR, 0, 0, 0), - GATE(sysreg, "sysreg", "aclk100", E4210_GATE_IP_PERIR, 0, 0, 0), + GATE(sysreg, "sysreg", "aclk100", E4210_GATE_IP_PERIR, 0, + CLK_IGNORE_UNUSED, 0), GATE(hdmi_cec, "hdmi_cec", "aclk100", E4210_GATE_IP_PERIR, 11, 0, 0), GATE(smmu_rotator, "smmu_rotator", "aclk200", E4210_GATE_IP_IMAGE, 4, 0, 0), @@ -819,7 +820,8 @@ struct samsung_gate_clock exynos4x12_gate_clks[] __initdata = { GATE(smmu_mdma, "smmu_mdma", "aclk200", E4X12_GATE_IP_IMAGE, 5, 0, 0), GATE(mipi_hsi, "mipi_hsi", "aclk133", GATE_IP_FSYS, 10, 0, 0), GATE(chipid, "chipid", "aclk100", E4X12_GATE_IP_PERIR, 0, 0, 0), - GATE(sysreg, "sysreg", "aclk100", E4X12_GATE_IP_PERIR, 1, 0, 0), + GATE(sysreg, "sysreg", "aclk100", E4X12_GATE_IP_PERIR, 1, + CLK_IGNORE_UNUSED, 0), GATE(hdmi_cec, "hdmi_cec", "aclk100", E4X12_GATE_IP_PERIR, 11, 0, 0), GATE(sclk_mdnie0, "sclk_mdnie0", "div_mdnie0", SRC_MASK_LCD0, 4, CLK_SET_RATE_PARENT, 0), -- cgit v0.10.2 From 8d0b8801c9e4c2c6b20cdac74dbab16facce7653 Mon Sep 17 00:00:00 2001 From: Wei Liu Date: Wed, 29 May 2013 17:02:58 +0100 Subject: xenbus_client.c: correct exit path for xenbus_map_ring_valloc_hvm Apparently we should not free page that has not been allocated. This is b/c alloc_xenballooned_pages will take care of freeing the page on its own. Signed-off-by: Wei Liu Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/xenbus/xenbus_client.c b/drivers/xen/xenbus/xenbus_client.c index 61786be..ec097d6 100644 --- a/drivers/xen/xenbus/xenbus_client.c +++ b/drivers/xen/xenbus/xenbus_client.c @@ -534,7 +534,7 @@ static int xenbus_map_ring_valloc_hvm(struct xenbus_device *dev, err = xenbus_map_ring(dev, gnt_ref, &node->handle, addr); if (err) - goto out_err; + goto out_err_free_ballooned_pages; spin_lock(&xenbus_valloc_lock); list_add(&node->next, &xenbus_valloc_pages); @@ -543,8 +543,9 @@ static int xenbus_map_ring_valloc_hvm(struct xenbus_device *dev, *vaddr = addr; return 0; - out_err: + out_err_free_ballooned_pages: free_xenballooned_pages(1, &node->page); + out_err: kfree(node); return err; } -- cgit v0.10.2 From 0184d50f9fd17658c232d6ee6d465a87f989d706 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Red Hat)" Date: Wed, 29 May 2013 15:56:49 -0400 Subject: tracing: Fix bad parameter passed in branch selftest The branch selftest calls trace_test_buffer(), but with the new code it expects the first parameter to be a pointer to a struct trace_buffer. All self tests were changed but the branch selftest was missed. This caused either a crash or failed test when the branch selftest was enabled. Link: http://lkml.kernel.org/r/20130529141333.GA24064@localhost Reported-by: Fengguang Wu Signed-off-by: Steven Rostedt diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c index 55e2cf6..2901e3b 100644 --- a/kernel/trace/trace_selftest.c +++ b/kernel/trace/trace_selftest.c @@ -1159,7 +1159,7 @@ trace_selftest_startup_branch(struct tracer *trace, struct trace_array *tr) /* stop the tracing. */ tracing_stop(); /* check the trace buffer */ - ret = trace_test_buffer(tr, &count); + ret = trace_test_buffer(&tr->trace_buffer, &count); trace->reset(tr); tracing_start(); -- cgit v0.10.2 From f448badd34700ae728a32ba024249626d49c10e1 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 29 May 2013 15:36:40 -0400 Subject: NFSv4: Fix a thinko in nfs4_try_open_cached We need to pass the full open mode flags to nfs_may_open() when doing a delegated open. Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 4e2fe71..d7ba561 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -1078,7 +1078,7 @@ static struct nfs4_state *nfs4_try_open_cached(struct nfs4_opendata *opendata) struct nfs4_state *state = opendata->state; struct nfs_inode *nfsi = NFS_I(state->inode); struct nfs_delegation *delegation; - int open_mode = opendata->o_arg.open_flags & (O_EXCL|O_TRUNC); + int open_mode = opendata->o_arg.open_flags; fmode_t fmode = opendata->o_arg.fmode; nfs4_stateid stateid; int ret = -EAGAIN; -- cgit v0.10.2 From 67e1e2268e598861dc771e3c976daf07db380638 Mon Sep 17 00:00:00 2001 From: Marek Belisko Date: Fri, 3 May 2013 07:53:22 +0200 Subject: clk: si5351: Fix clkout rate computation. Rate was incorrectly computed because we read from wrong divider register. Signed-off-by: Marek Belisko Acked-by: Sebastian Hesselbarth Signed-off-by: Mike Turquette Cc: stable@kernel.org diff --git a/drivers/clk/clk-si5351.c b/drivers/clk/clk-si5351.c index 8927284..cf39e53 100644 --- a/drivers/clk/clk-si5351.c +++ b/drivers/clk/clk-si5351.c @@ -932,7 +932,7 @@ static unsigned long si5351_clkout_recalc_rate(struct clk_hw *hw, unsigned char reg; unsigned char rdiv; - if (hwdata->num > 5) + if (hwdata->num <= 5) reg = si5351_msynth_params_address(hwdata->num) + 2; else reg = SI5351_CLK6_7_OUTPUT_DIVIDER; -- cgit v0.10.2 From 6532cb71fb31436b8d31818a056f45b8f95dfb31 Mon Sep 17 00:00:00 2001 From: Marek Belisko Date: Fri, 3 May 2013 07:53:23 +0200 Subject: clk: si5351: Set initial clkout rate when defined in platform data. clock-frequency property from platform data was read but never used. Apply defined rate when clock is registered. Signed-off-by: Marek Belisko Acked-by: Sebastian Hesselbarth Signed-off-by: Mike Turquette [mturquette@linaro.org: add missing changelog] Cc: stable@kernel.org Signed-off-by: Mike Turquette diff --git a/drivers/clk/clk-si5351.c b/drivers/clk/clk-si5351.c index cf39e53..24f5536 100644 --- a/drivers/clk/clk-si5351.c +++ b/drivers/clk/clk-si5351.c @@ -1477,6 +1477,16 @@ static int si5351_i2c_probe(struct i2c_client *client, return -EINVAL; } drvdata->onecell.clks[n] = clk; + + /* set initial clkout rate */ + if (pdata->clkout[n].rate != 0) { + int ret; + ret = clk_set_rate(clk, pdata->clkout[n].rate); + if (ret != 0) { + dev_err(&client->dev, "Cannot set rate : %d\n", + ret); + } + } } ret = of_clk_add_provider(client->dev.of_node, of_clk_src_onecell_get, -- cgit v0.10.2 From 063f4661fde8c03c4c03f8a205071a52691c152e Mon Sep 17 00:00:00 2001 From: Dirk Gouders Date: Sun, 19 May 2013 21:48:44 +0200 Subject: mconf: handle keys in empty dialogs When entering an empty dialog, using the movement keys resulted in unexpected characters beeing displayed, other keys like "z" and "h" did not work as expected. This patch handles the movement keys as well as other keys, especially "z", "h" and "/". Signed-off-by: Dirk Gouders [yann.morin.1998@free.fr: keep lines <80 chars, so reorder test] Tested-by: "Yann E. MORIN" Reviewed-by: "Yann E. MORIN" Signed-off-by: "Yann E. MORIN" diff --git a/scripts/kconfig/lxdialog/menubox.c b/scripts/kconfig/lxdialog/menubox.c index 48d382e..38cd69c 100644 --- a/scripts/kconfig/lxdialog/menubox.c +++ b/scripts/kconfig/lxdialog/menubox.c @@ -303,10 +303,11 @@ do_resize: } } - if (i < max_choice || - key == KEY_UP || key == KEY_DOWN || - key == '-' || key == '+' || - key == KEY_PPAGE || key == KEY_NPAGE) { + if (item_count() != 0 && + (i < max_choice || + key == KEY_UP || key == KEY_DOWN || + key == '-' || key == '+' || + key == KEY_PPAGE || key == KEY_NPAGE)) { /* Remove highligt of current item */ print_item(scroll + choice, choice, FALSE); diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c index 387dc8d..a69cbd7 100644 --- a/scripts/kconfig/mconf.c +++ b/scripts/kconfig/mconf.c @@ -670,11 +670,12 @@ static void conf(struct menu *menu, struct menu *active_menu) active_menu, &s_scroll); if (res == 1 || res == KEY_ESC || res == -ERRDISPLAYTOOSMALL) break; - if (!item_activate_selected()) - continue; - if (!item_tag()) - continue; - + if (item_count() != 0) { + if (!item_activate_selected()) + continue; + if (!item_tag()) + continue; + } submenu = item_data(); active_menu = item_data(); if (submenu) -- cgit v0.10.2 From e983b7b17ad1a978e954e6aaa62cf12bfc747883 Mon Sep 17 00:00:00 2001 From: Dirk Gouders Date: Tue, 21 May 2013 10:54:11 +0200 Subject: kconfig/menu.c: fix multiple references to expressions in menu_add_prop() menu_add_prop() applies upper menus' visibilities to actual prompts by AND-ing the prompts visibilities with the upper menus ones. This creates a further reference to the menu's visibilities and when the expression reduction functions do their work, they may remove or modify expressions that have multiple references, thus causing unpredictable side-effects. The following example Kconfig constructs a case where this causes problems: a menu and a prompt which's visibilities depend on the same symbol. When invoking mconf with this Kconfig and pressing "Z" we see a problem caused by a free'd expression still referenced by the menu's visibility: ------------------------------------------------------------------------ mainmenu "Kconfig Testing Configuration" config VISIBLE def_bool n config Placeholder bool "Place holder" menu "Invisible" visible if VISIBLE config TEST_VAR bool "Test option" if VISIBLE endmenu ------------------------------------------------------------------------ This patch fixes this problem by creating copies of the menu's visibility expressions before AND-ing them with the prompt's one. Signed-off-by: Dirk Gouders [yann.morin.1998@free.fr: move variable into its block-scope, keep lines <80 chars, typo] Tested-by: "Yann E. MORIN" Reviewed-by: "Yann E. MORIN" Signed-off-by: "Yann E. MORIN" diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c index b5c7d90..fd3f018 100644 --- a/scripts/kconfig/menu.c +++ b/scripts/kconfig/menu.c @@ -146,11 +146,24 @@ struct property *menu_add_prop(enum prop_type type, char *prompt, struct expr *e struct menu *menu = current_entry; while ((menu = menu->parent) != NULL) { + struct expr *dup_expr; + if (!menu->visibility) continue; + /* + * Do not add a reference to the + * menu's visibility expression but + * use a copy of it. Otherwise the + * expression reduction functions + * will modify expressions that have + * multiple references which can + * cause unwanted side effects. + */ + dup_expr = expr_copy(menu->visibility); + prop->visible.expr = expr_alloc_and(prop->visible.expr, - menu->visibility); + dup_expr); } } -- cgit v0.10.2 From 419e321df8d7d605f21f980903befc65ee66e848 Mon Sep 17 00:00:00 2001 From: Tony Prisk Date: Sat, 18 May 2013 09:18:49 +1200 Subject: clk: vt8500: Fix unbalanced spinlock in vt8500_dclk_set_rate() With the addition of a DVO clock, a bug is now evident in the vt8500 clock code: [ 0.290000] WARNING: at init/main.c:698 do_one_initcall+0x158/0x18c() [ 0.300000] initcall wm8505fb_driver_init+0x0/0xc returned with disabled int This is caused by an unbalanced spinlock in vt8500_dclk_set_rate(). Replace the second call to spin_lock_irqsave() with spin_unlock_irqrestore(). Signed-off-by: Tony Prisk Signed-off-by: Mike Turquette diff --git a/drivers/clk/clk-vt8500.c b/drivers/clk/clk-vt8500.c index debf688..553ac35 100644 --- a/drivers/clk/clk-vt8500.c +++ b/drivers/clk/clk-vt8500.c @@ -183,7 +183,7 @@ static int vt8500_dclk_set_rate(struct clk_hw *hw, unsigned long rate, writel(divisor, cdev->div_reg); vt8500_pmc_wait_busy(); - spin_lock_irqsave(cdev->lock, flags); + spin_unlock_irqrestore(cdev->lock, flags); return 0; } -- cgit v0.10.2 From 9b31a328e344e62e7cc98ae574edcb7b674719bb Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 15 May 2013 00:52:44 -0700 Subject: target: Re-instate sess_wait_list for target_wait_for_sess_cmds Switch back to pre commit 1c7b13fe652 list splicing logic for active I/O shutdown with tcm_qla2xxx + ib_srpt fabrics. The original commit was done under the incorrect assumption that it's safe to walk se_sess->sess_cmd_list unprotected in target_wait_for_sess_cmds() after sess->sess_tearing_down = 1 has been set by target_sess_cmd_list_set_waiting() during session shutdown. So instead of adding sess->sess_cmd_lock protection around sess->sess_cmd_list during target_wait_for_sess_cmds(), switch back to sess->sess_wait_list to allow wait_for_completion() + TFO->release_cmd() to occur without having to walk ->sess_cmd_list after the list_splice. Also add a check to exit if target_sess_cmd_list_set_waiting() has already been called, and add a WARN_ON to check for any fabric bug where new se_cmds are added to sess->sess_cmd_list after sess->sess_tearing_down = 1 has already been set. Cc: Joern Engel Cc: Roland Dreier Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 311c113..bbca144 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -221,6 +221,7 @@ struct se_session *transport_init_session(void) INIT_LIST_HEAD(&se_sess->sess_list); INIT_LIST_HEAD(&se_sess->sess_acl_list); INIT_LIST_HEAD(&se_sess->sess_cmd_list); + INIT_LIST_HEAD(&se_sess->sess_wait_list); spin_lock_init(&se_sess->sess_cmd_lock); kref_init(&se_sess->sess_kref); @@ -2250,11 +2251,14 @@ void target_sess_cmd_list_set_waiting(struct se_session *se_sess) unsigned long flags; spin_lock_irqsave(&se_sess->sess_cmd_lock, flags); - - WARN_ON(se_sess->sess_tearing_down); + if (se_sess->sess_tearing_down) { + spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); + return; + } se_sess->sess_tearing_down = 1; + list_splice_init(&se_sess->sess_cmd_list, &se_sess->sess_wait_list); - list_for_each_entry(se_cmd, &se_sess->sess_cmd_list, se_cmd_list) + list_for_each_entry(se_cmd, &se_sess->sess_wait_list, se_cmd_list) se_cmd->cmd_wait_set = 1; spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); @@ -2267,9 +2271,10 @@ EXPORT_SYMBOL(target_sess_cmd_list_set_waiting); void target_wait_for_sess_cmds(struct se_session *se_sess) { struct se_cmd *se_cmd, *tmp_cmd; + unsigned long flags; list_for_each_entry_safe(se_cmd, tmp_cmd, - &se_sess->sess_cmd_list, se_cmd_list) { + &se_sess->sess_wait_list, se_cmd_list) { list_del(&se_cmd->se_cmd_list); pr_debug("Waiting for se_cmd: %p t_state: %d, fabric state:" @@ -2283,6 +2288,11 @@ void target_wait_for_sess_cmds(struct se_session *se_sess) se_cmd->se_tfo->release_cmd(se_cmd); } + + spin_lock_irqsave(&se_sess->sess_cmd_lock, flags); + WARN_ON(!list_empty(&se_sess->sess_cmd_list)); + spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); + } EXPORT_SYMBOL(target_wait_for_sess_cmds); diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index e773dfa..4ea4f98 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -543,6 +543,7 @@ struct se_session { struct list_head sess_list; struct list_head sess_acl_list; struct list_head sess_cmd_list; + struct list_head sess_wait_list; spinlock_t sess_cmd_lock; struct kref sess_kref; }; -- cgit v0.10.2 From 1d19f7800d643b270b28d0a969c5eca455d54397 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 15 May 2013 01:30:01 -0700 Subject: ib_srpt: Call target_sess_cmd_list_set_waiting during shutdown_session Given that srpt_release_channel_work() calls target_wait_for_sess_cmds() to allow outstanding se_cmd_t->cmd_kref a change to complete, the call to perform target_sess_cmd_list_set_waiting() needs to happen in srpt_shutdown_session() Also, this patch adds an explicit call to srpt_shutdown_session() within srpt_drain_channel() so that target_sess_cmd_list_set_waiting() will be called in the cases where TFO->shutdown_session() is not triggered directly by TCM. Cc: Joern Engel Cc: Roland Dreier Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c index 564024e..3f3f041 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -2227,6 +2227,27 @@ static void srpt_close_ch(struct srpt_rdma_ch *ch) } /** + * srpt_shutdown_session() - Whether or not a session may be shut down. + */ +static int srpt_shutdown_session(struct se_session *se_sess) +{ + struct srpt_rdma_ch *ch = se_sess->fabric_sess_ptr; + unsigned long flags; + + spin_lock_irqsave(&ch->spinlock, flags); + if (ch->in_shutdown) { + spin_unlock_irqrestore(&ch->spinlock, flags); + return true; + } + + ch->in_shutdown = true; + target_sess_cmd_list_set_waiting(se_sess); + spin_unlock_irqrestore(&ch->spinlock, flags); + + return true; +} + +/** * srpt_drain_channel() - Drain a channel by resetting the IB queue pair. * @cm_id: Pointer to the CM ID of the channel to be drained. * @@ -2264,6 +2285,9 @@ static void srpt_drain_channel(struct ib_cm_id *cm_id) spin_unlock_irq(&sdev->spinlock); if (do_reset) { + if (ch->sess) + srpt_shutdown_session(ch->sess); + ret = srpt_ch_qp_err(ch); if (ret < 0) printk(KERN_ERR "Setting queue pair in error state" @@ -3467,14 +3491,6 @@ static void srpt_release_cmd(struct se_cmd *se_cmd) } /** - * srpt_shutdown_session() - Whether or not a session may be shut down. - */ -static int srpt_shutdown_session(struct se_session *se_sess) -{ - return true; -} - -/** * srpt_close_session() - Forcibly close a session. * * Callback function invoked by the TCM core to clean up sessions associated diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.h b/drivers/infiniband/ulp/srpt/ib_srpt.h index 4caf55c..3dae156 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.h +++ b/drivers/infiniband/ulp/srpt/ib_srpt.h @@ -325,6 +325,7 @@ struct srpt_rdma_ch { u8 sess_name[36]; struct work_struct release_work; struct completion *release_done; + bool in_shutdown; }; /** -- cgit v0.10.2 From 1e00227d4e8017ac9c3f73bf949a06c6e27f5122 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 28 May 2013 20:21:02 +0100 Subject: MN10300: Fix ret_from_kernel_thread ret_from_kernel_thread needs to set A2 to the thread_info pointer before jumping to syscall_exit. Without this, we never correctly start userspace. This was caused by the rejuggling of the fork/exec paths in commit ddf23e87a804 ("mn10300: switch to saner kernel_execve() semantics") Reported-by: Ken Cox Signed-off-by: David Howells Acked-by: Ken Cox Acked-by: Al Viro Signed-off-by: Linus Torvalds diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index 68fcab8..9420057 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -60,6 +60,7 @@ ENTRY(ret_from_kernel_thread) mov (REG_D0,fp),d0 mov (REG_A0,fp),a0 calls (a0) + GET_THREAD_INFO a2 # A2 must be set on return from sys_exit() clr d0 mov d0,(REG_D0,fp) jmp syscall_exit -- cgit v0.10.2 From d17fc238ac1486906ff724b4a5fe4ec169f554c5 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 28 May 2013 20:21:10 +0100 Subject: MN10300: Enable IRQs more in system call exit work path Enable IRQs when calling schedule() for TIF_NEED_RESCHED and do_notify_resume(). If interrupts are enabled during do_notify_resume(), a warning can be seen (see lower down). Whilst we're at it, resume_userspace can be made local to entry.S as it is not called outside of there and it can be merged with the part of work_resched that occurs after schedule() is called. WARNING: at kernel/softirq.c:160 local_bh_enable+0x42/0xa0() Call Trace: local_bh_enable+0x42/0xa0 unix_release_sock+0x86/0x23c unix_release+0x20/0x28 sock_release+0x17/0x88 sock_close+0x20/0x28 __fput+0xc9/0x1fc ____fput+0xb/0x10 task_work_run+0x64/0x78 do_notify_resume+0x53d/0x544 work_notifysig+0xa/0xc Signed-off-by: David Howells Acked-by: Ken Cox Signed-off-by: Linus Torvalds diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index 9420057..222152a 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -108,10 +108,10 @@ syscall_exit_work: and EPSW_nSL,d0 beq resume_kernel # returning to supervisor mode - btst _TIF_SYSCALL_TRACE,d2 - beq work_pending LOCAL_IRQ_ENABLE # could let syscall_trace_exit() call # schedule() instead + btst _TIF_SYSCALL_TRACE,d2 + beq work_pending mov fp,d0 call syscall_trace_exit[],0 # do_syscall_trace(regs) jmp resume_userspace @@ -124,6 +124,7 @@ work_pending: work_resched: call schedule[],0 +resume_userspace: # make sure we don't miss an interrupt setting need_resched or # sigpending between sampling and the rti LOCAL_IRQ_DISABLE @@ -132,6 +133,8 @@ work_resched: mov (TI_flags,a2),d2 btst _TIF_WORK_MASK,d2 beq restore_all + + LOCAL_IRQ_ENABLE btst _TIF_NEED_RESCHED,d2 bne work_resched @@ -170,17 +173,6 @@ ret_from_intr: and EPSW_nSL,d0 beq resume_kernel # returning to supervisor mode -ENTRY(resume_userspace) - # make sure we don't miss an interrupt setting need_resched or - # sigpending between sampling and the rti - LOCAL_IRQ_DISABLE - - # is there any work to be done on int/exception return? - mov (TI_flags,a2),d2 - btst _TIF_WORK_MASK,d2 - bne work_pending - jmp restore_all - #ifdef CONFIG_PREEMPT ENTRY(resume_kernel) LOCAL_IRQ_DISABLE -- cgit v0.10.2 From b8bc9b0237873e814266566f84003d73799f170f Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 28 May 2013 20:21:17 +0100 Subject: MN10300: ASB2305's PCI code needs the definition of XIRQ1 The code for PCI in the ASB2305 needs the definition of XIRQ1 from proc/irq.h otherwise the following error appears: arch/mn10300/unit-asb2305/pci.c: In function 'unit_pci_init': arch/mn10300/unit-asb2305/pci.c:481: error: 'XIRQ1' undeclared (first use in this function) arch/mn10300/unit-asb2305/pci.c:481: error: (Each undeclared identifier is reported only once arch/mn10300/unit-asb2305/pci.c:481: error: for each function it appears in.) Signed-off-by: David Howells Acked-by: Ken Cox Signed-off-by: Linus Torvalds diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c index 1adcf02..e37fac0 100644 --- a/arch/mn10300/unit-asb2305/pci.c +++ b/arch/mn10300/unit-asb2305/pci.c @@ -19,6 +19,7 @@ #include #include #include +#include #include "pci-asb2305.h" unsigned int pci_probe = 1; -- cgit v0.10.2 From 1aeeac7ad484e1bea6fe602880893b3074adb40a Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 28 May 2013 20:21:25 +0100 Subject: MN10300: Need pci_iomap() and __pci_ioport_map() defining Include the generic definitions of pci_iomap() and __pci_ioport_map() otherwise we can get errors like: lib/pci_iomap.c: In function 'pci_iomap': lib/pci_iomap.c:37: error: implicit declaration of function '__pci_ioport_map' lib/pci_iomap.c:37: warning: return makes pointer from integer without a cast and: drivers/pci/quirks.c: In function 'disable_igfx_irq': drivers/pci/quirks.c:2893: error: implicit declaration of function 'pci_iomap' drivers/pci/quirks.c:2893: warning: initialization makes pointer from integer without a cast drivers/pci/quirks.c: In function 'reset_ivb_igd': drivers/pci/quirks.c:3133: warning: assignment makes pointer from integer without a cast Signed-off-by: David Howells Acked-by: Ken Cox Signed-off-by: Linus Torvalds diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h index 8137c25..6f31cc0 100644 --- a/arch/mn10300/include/asm/pci.h +++ b/arch/mn10300/include/asm/pci.h @@ -103,4 +103,6 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) return channel ? 15 : 14; } +#include + #endif /* _ASM_PCI_H */ -- cgit v0.10.2 From 4997b72ee62930cb841d185398ea547d979789f4 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Thu, 30 May 2013 08:44:39 +0200 Subject: raid5: Initialize bi_vcnt The patch that converted raid5 to use bio_reset() forgot to initialize bi_vcnt. Signed-off-by: Kent Overstreet Cc: NeilBrown Cc: linux-raid@vger.kernel.org Tested-by: Ilia Mirkin Signed-off-by: Jens Axboe diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 9359828..753f318 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -664,6 +664,7 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s) if (test_bit(R5_ReadNoMerge, &sh->dev[i].flags)) bi->bi_rw |= REQ_FLUSH; + bi->bi_vcnt = 1; bi->bi_io_vec[0].bv_len = STRIPE_SIZE; bi->bi_io_vec[0].bv_offset = 0; bi->bi_size = STRIPE_SIZE; @@ -701,6 +702,7 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s) else rbi->bi_sector = (sh->sector + rrdev->data_offset); + rbi->bi_vcnt = 1; rbi->bi_io_vec[0].bv_len = STRIPE_SIZE; rbi->bi_io_vec[0].bv_offset = 0; rbi->bi_size = STRIPE_SIZE; -- cgit v0.10.2 From ac4e97abce9b80c020e7113325f49e58b7b15e3f Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 30 May 2013 09:19:35 +0200 Subject: scatterlist: sg_set_buf() argument must be in linear mapping Add a check behind CONFIG_DEBUG_SG to verify this. Signed-off-by: Rusty Russell Signed-off-by: Jens Axboe diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h index 5951e3f..2680677 100644 --- a/include/linux/scatterlist.h +++ b/include/linux/scatterlist.h @@ -111,6 +111,9 @@ static inline struct page *sg_page(struct scatterlist *sg) static inline void sg_set_buf(struct scatterlist *sg, const void *buf, unsigned int buflen) { +#ifdef CONFIG_DEBUG_SG + BUG_ON(!virt_addr_valid(buf)); +#endif sg_set_page(sg, virt_to_page(buf), buflen, offset_in_page(buf)); } -- cgit v0.10.2 From 3f4d6364084ca0525591836eba4a59f04bb85c68 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Wed, 8 May 2013 16:09:06 +0530 Subject: regulator: palmas: Fix incorrect condition Since 'id' cannot take two values at the same time, the condition should probably be an OR (||) instead of AND (&&). Introduced by commit 28d1e8cd67 ("regulator: palma: add ramp delay support through regulator constraints"). Signed-off-by: Sachin Kamat Signed-off-by: Mark Brown diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index 92ceed0..ced7416 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -840,7 +840,7 @@ static int palmas_regulators_probe(struct platform_device *pdev) break; } - if ((id == PALMAS_REG_SMPS6) && (id == PALMAS_REG_SMPS8)) + if ((id == PALMAS_REG_SMPS6) || (id == PALMAS_REG_SMPS8)) ramp_delay_support = true; if (ramp_delay_support) { -- cgit v0.10.2 From f232168df0c7e7414b70ac5d8fed83086d441c0b Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 30 May 2013 15:55:09 +0530 Subject: regulator: palmas: Fix "enable_reg" to point to the correct reg for SMPS10 regulator_enable_regmap() uses enable_reg to enable the regulator. But enable_reg for smps10 points to SMPS10_STATUS which is a read-only register. Fixed the same by having enable_reg set to SMPS10_CTRL. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index ced7416..3ae44ac 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -878,7 +878,7 @@ static int palmas_regulators_probe(struct platform_device *pdev) pmic->desc[id].vsel_mask = SMPS10_VSEL; pmic->desc[id].enable_reg = PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE, - PALMAS_SMPS10_STATUS); + PALMAS_SMPS10_CTRL); pmic->desc[id].enable_mask = SMPS10_BOOST_EN; pmic->desc[id].min_uV = 3750000; pmic->desc[id].uV_step = 1250000; -- cgit v0.10.2 From 9e43088bb015397930d6c9ea5edba92abc0dc655 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 29 May 2013 18:38:46 +0100 Subject: ASoC: wm8994: Avoid leaking pm_runtime reference on removed jack race Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index dfd997a..19e0b20 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -3836,7 +3836,7 @@ static irqreturn_t wm8958_mic_irq(int irq, void *data) ret); } else if (!(ret & WM1811_JACKDET_LVL)) { dev_dbg(codec->dev, "Ignoring removed jack\n"); - return IRQ_HANDLED; + goto out; } } else if (!(reg & WM8958_MICD_STS)) { snd_soc_jack_report(wm8994->micdet[0].jack, 0, -- cgit v0.10.2 From 308853139fcd440e4ca28d844678c7e69fb40826 Mon Sep 17 00:00:00 2001 From: Paul Zimmerman Date: Fri, 24 May 2013 16:27:56 -0700 Subject: staging: dwc2: fix value of dma_mask Passing the value DMA_BIT_MASK(31) to dma_set_mask() causes the dwc2-pci driver to sometimes fail (cannot enumerate the connected device). Change it to DMA_BIT_MASK(32) instead, which is a more sensible value anyway. Signed-off-by: Paul Zimmerman Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/dwc2/hcd.c b/drivers/staging/dwc2/hcd.c index 827ab78..8551cce 100644 --- a/drivers/staging/dwc2/hcd.c +++ b/drivers/staging/dwc2/hcd.c @@ -2804,9 +2804,8 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq, /* Set device flags indicating whether the HCD supports DMA */ if (hsotg->core_params->dma_enable > 0) { - if (dma_set_mask(hsotg->dev, DMA_BIT_MASK(31)) < 0) - dev_warn(hsotg->dev, - "can't enable workaround for >2GB RAM\n"); + if (dma_set_mask(hsotg->dev, DMA_BIT_MASK(32)) < 0) + dev_warn(hsotg->dev, "can't set DMA mask\n"); if (dma_set_coherent_mask(hsotg->dev, DMA_BIT_MASK(31)) < 0) dev_warn(hsotg->dev, "can't enable workaround for >2GB RAM\n"); -- cgit v0.10.2 From 76554b87c85c0ac5ba56797dda670bad6677f9f1 Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Mon, 27 May 2013 11:15:40 +0800 Subject: drivers: staging: zcache: fix compile error Fix below compile error: drivers/built-in.o: In function `zcache_pampd_free': >> zcache-main.c:(.text+0xb1c8a): undefined reference to `ramster_pampd_free' >> zcache-main.c:(.text+0xb1cbc): undefined reference to `ramster_count_foreign_pages' drivers/built-in.o: In function `zcache_pampd_get_data_and_free': >> zcache-main.c:(.text+0xb1f05): undefined reference to `ramster_count_foreign_pages' drivers/built-in.o: In function `zcache_cpu_notifier': >> zcache-main.c:(.text+0xb228d): undefined reference to `ramster_cpu_up' >> zcache-main.c:(.text+0xb2339): undefined reference to `ramster_cpu_down' drivers/built-in.o: In function `zcache_pampd_create': >> (.text+0xb26ce): undefined reference to `ramster_count_foreign_pages' drivers/built-in.o: In function `zcache_pampd_create': >> (.text+0xb27ef): undefined reference to `ramster_count_foreign_pages' drivers/built-in.o: In function `zcache_put_page': >> (.text+0xb299f): undefined reference to `ramster_do_preload_flnode' drivers/built-in.o: In function `zcache_flush_page': >> (.text+0xb2ea3): undefined reference to `ramster_do_preload_flnode' drivers/built-in.o: In function `zcache_flush_object': >> (.text+0xb307c): undefined reference to `ramster_do_preload_flnode' drivers/built-in.o: In function `zcache_init': >> zcache-main.c:(.text+0xb3629): undefined reference to `ramster_register_pamops' >> zcache-main.c:(.text+0xb3868): undefined reference to `ramster_init' >> drivers/built-in.o:(.rodata+0x15058): undefined reference to `ramster_foreign_eph_pages' >> drivers/built-in.o:(.rodata+0x15078): undefined reference to `ramster_foreign_pers_pages' Reported-by: Fengguang Wu Signed-off-by: Bob Liu Acked-by: Konrad Rzeszutek Wilk Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/zcache/ramster.h b/drivers/staging/zcache/ramster.h index e1f91d5..a858666 100644 --- a/drivers/staging/zcache/ramster.h +++ b/drivers/staging/zcache/ramster.h @@ -11,10 +11,6 @@ #ifndef _ZCACHE_RAMSTER_H_ #define _ZCACHE_RAMSTER_H_ -#ifdef CONFIG_RAMSTER_MODULE -#define CONFIG_RAMSTER -#endif - #ifdef CONFIG_RAMSTER #include "ramster/ramster.h" #else diff --git a/drivers/staging/zcache/ramster/debug.c b/drivers/staging/zcache/ramster/debug.c index 327e4f0..5b26ee9 100644 --- a/drivers/staging/zcache/ramster/debug.c +++ b/drivers/staging/zcache/ramster/debug.c @@ -1,6 +1,8 @@ #include #include "debug.h" +ssize_t ramster_foreign_eph_pages; +ssize_t ramster_foreign_pers_pages; #ifdef CONFIG_DEBUG_FS #include diff --git a/drivers/staging/zcache/ramster/ramster.c b/drivers/staging/zcache/ramster/ramster.c index b18b887..a937ce1 100644 --- a/drivers/staging/zcache/ramster/ramster.c +++ b/drivers/staging/zcache/ramster/ramster.c @@ -66,8 +66,6 @@ static int ramster_remote_target_nodenum __read_mostly = -1; /* Used by this code. */ long ramster_flnodes; -ssize_t ramster_foreign_eph_pages; -ssize_t ramster_foreign_pers_pages; /* FIXME frontswap selfshrinking knobs in debugfs? */ static LIST_HEAD(ramster_rem_op_list); @@ -399,14 +397,18 @@ void ramster_count_foreign_pages(bool eph, int count) inc_ramster_foreign_eph_pages(); } else { dec_ramster_foreign_eph_pages(); +#ifdef CONFIG_RAMSTER_DEBUG WARN_ON_ONCE(ramster_foreign_eph_pages < 0); +#endif } } else { if (count > 0) { inc_ramster_foreign_pers_pages(); } else { dec_ramster_foreign_pers_pages(); +#ifdef CONFIG_RAMSTER_DEBUG WARN_ON_ONCE(ramster_foreign_pers_pages < 0); +#endif } } } -- cgit v0.10.2 From 077f5f1c23b3cf1134c031677497dfb6077e6bdd Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 29 May 2013 11:33:52 -0400 Subject: USB: EHCI: fix regression related to qh_refresh() This patch adds some code that inadvertently got left out of commit c1fdb68e3d73741630ca16695cf9176c233be7ed (USB: EHCI: changes related to qh_refresh()). The calls to qh_refresh() and qh_link_periodic() were taken out of qh_schedule(); therefore it is necessary to call these routines manually after calling qh_schedule(). Signed-off-by: Alan Stern Reported-and-tested-by: Oleksij Rempel Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index f3c1028..f80d033 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -646,6 +646,10 @@ static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh) /* reschedule QH iff another request is queued */ if (!list_empty(&qh->qtd_list) && ehci->rh_state == EHCI_RH_RUNNING) { rc = qh_schedule(ehci, qh); + if (rc == 0) { + qh_refresh(ehci, qh); + qh_link_periodic(ehci, qh); + } /* An error here likely indicates handshake failure * or no space left in the schedule. Neither fault @@ -653,9 +657,10 @@ static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh) * * FIXME kill the now-dysfunctional queued urbs */ - if (rc != 0) + else { ehci_err(ehci, "can't reschedule qh %p, err %d\n", qh, rc); + } } /* maybe turn off periodic schedule */ -- cgit v0.10.2 From 7afce3f5e56e9cb97cf1f35832bf8e8dde08cc45 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 30 May 2013 13:42:27 +0100 Subject: ASoC: wm8994: Ensure microphone detection state is reset on removal Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 19e0b20..29e95f9 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -3842,6 +3842,7 @@ static irqreturn_t wm8958_mic_irq(int irq, void *data) snd_soc_jack_report(wm8994->micdet[0].jack, 0, SND_JACK_MECHANICAL | SND_JACK_HEADSET | wm8994->btn_mask); + wm8994->mic_detecting = true; goto out; } -- cgit v0.10.2 From 37448adfc7ce0d6d5892b87aa8d57edde4126f49 Mon Sep 17 00:00:00 2001 From: Lance Ortiz Date: Thu, 30 May 2013 08:25:12 -0600 Subject: aerdrv: Move cper_print_aer() call out of interrupt context The following warning was seen on 3.9 when a corrected PCIe error was being handled by the AER subsystem. WARNING: at .../drivers/pci/search.c:214 pci_get_dev_by_id+0x8a/0x90() This occurred because a call to pci_get_domain_bus_and_slot() was added to cper_print_pcie() to setup for the call to cper_print_aer(). The warning showed up because cper_print_pcie() is called in an interrupt context and pci_get* functions are not supposed to be called in that context. The solution is to move the cper_print_aer() call out of the interrupt context and into aer_recover_work_func() to avoid any warnings when calling pci_get* functions. Signed-off-by: Lance Ortiz Acked-by: Borislav Petkov Acked-by: Rafael J. Wysocki Signed-off-by: Tony Luck diff --git a/drivers/acpi/apei/cper.c b/drivers/acpi/apei/cper.c index fefc2ca..33dc6a0 100644 --- a/drivers/acpi/apei/cper.c +++ b/drivers/acpi/apei/cper.c @@ -250,10 +250,6 @@ static const char *cper_pcie_port_type_strs[] = { static void cper_print_pcie(const char *pfx, const struct cper_sec_pcie *pcie, const struct acpi_hest_generic_data *gdata) { -#ifdef CONFIG_ACPI_APEI_PCIEAER - struct pci_dev *dev; -#endif - if (pcie->validation_bits & CPER_PCIE_VALID_PORT_TYPE) printk("%s""port_type: %d, %s\n", pfx, pcie->port_type, pcie->port_type < ARRAY_SIZE(cper_pcie_port_type_strs) ? @@ -285,20 +281,6 @@ static void cper_print_pcie(const char *pfx, const struct cper_sec_pcie *pcie, printk( "%s""bridge: secondary_status: 0x%04x, control: 0x%04x\n", pfx, pcie->bridge.secondary_status, pcie->bridge.control); -#ifdef CONFIG_ACPI_APEI_PCIEAER - dev = pci_get_domain_bus_and_slot(pcie->device_id.segment, - pcie->device_id.bus, pcie->device_id.function); - if (!dev) { - pr_err("PCI AER Cannot get PCI device %04x:%02x:%02x.%d\n", - pcie->device_id.segment, pcie->device_id.bus, - pcie->device_id.slot, pcie->device_id.function); - return; - } - if (pcie->validation_bits & CPER_PCIE_VALID_AER_INFO) - cper_print_aer(pfx, dev, gdata->error_severity, - (struct aer_capability_regs *) pcie->aer_info); - pci_dev_put(dev); -#endif } static const char *apei_estatus_section_flag_strs[] = { diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c index d668a8a..403baf4 100644 --- a/drivers/acpi/apei/ghes.c +++ b/drivers/acpi/apei/ghes.c @@ -454,7 +454,9 @@ static void ghes_do_proc(struct ghes *ghes, aer_severity = cper_severity_to_aer(sev); aer_recover_queue(pcie_err->device_id.segment, pcie_err->device_id.bus, - devfn, aer_severity); + devfn, aer_severity, + (struct aer_capability_regs *) + pcie_err->aer_info); } } diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index 8ec8b4f..0f4554e 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -580,6 +580,7 @@ struct aer_recover_entry u8 devfn; u16 domain; int severity; + struct aer_capability_regs *regs; }; static DEFINE_KFIFO(aer_recover_ring, struct aer_recover_entry, @@ -593,7 +594,7 @@ static DEFINE_SPINLOCK(aer_recover_ring_lock); static DECLARE_WORK(aer_recover_work, aer_recover_work_func); void aer_recover_queue(int domain, unsigned int bus, unsigned int devfn, - int severity) + int severity, struct aer_capability_regs *aer_regs) { unsigned long flags; struct aer_recover_entry entry = { @@ -601,6 +602,7 @@ void aer_recover_queue(int domain, unsigned int bus, unsigned int devfn, .devfn = devfn, .domain = domain, .severity = severity, + .regs = aer_regs, }; spin_lock_irqsave(&aer_recover_ring_lock, flags); @@ -627,6 +629,7 @@ static void aer_recover_work_func(struct work_struct *work) PCI_SLOT(entry.devfn), PCI_FUNC(entry.devfn)); continue; } + cper_print_aer(pdev, entry.severity, entry.regs); do_recovery(pdev, entry.severity); pci_dev_put(pdev); } diff --git a/drivers/pci/pcie/aer/aerdrv_errprint.c b/drivers/pci/pcie/aer/aerdrv_errprint.c index 5ab1425..2c7c9f5 100644 --- a/drivers/pci/pcie/aer/aerdrv_errprint.c +++ b/drivers/pci/pcie/aer/aerdrv_errprint.c @@ -220,7 +220,7 @@ int cper_severity_to_aer(int cper_severity) } EXPORT_SYMBOL_GPL(cper_severity_to_aer); -void cper_print_aer(const char *prefix, struct pci_dev *dev, int cper_severity, +void cper_print_aer(struct pci_dev *dev, int cper_severity, struct aer_capability_regs *aer) { int aer_severity, layer, agent, status_strs_size, tlp_header_valid = 0; @@ -244,7 +244,7 @@ void cper_print_aer(const char *prefix, struct pci_dev *dev, int cper_severity, agent = AER_GET_AGENT(aer_severity, status); dev_err(&dev->dev, "aer_status: 0x%08x, aer_mask: 0x%08x\n", status, mask); - cper_print_bits(prefix, status, status_strs, status_strs_size); + cper_print_bits("", status, status_strs, status_strs_size); dev_err(&dev->dev, "aer_layer=%s, aer_agent=%s\n", aer_error_layer[layer], aer_agent_string[agent]); if (aer_severity != AER_CORRECTABLE) diff --git a/include/linux/aer.h b/include/linux/aer.h index ec10e1b..737f90a 100644 --- a/include/linux/aer.h +++ b/include/linux/aer.h @@ -49,10 +49,11 @@ static inline int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev) } #endif -extern void cper_print_aer(const char *prefix, struct pci_dev *dev, +extern void cper_print_aer(struct pci_dev *dev, int cper_severity, struct aer_capability_regs *aer); extern int cper_severity_to_aer(int cper_severity); extern void aer_recover_queue(int domain, unsigned int bus, unsigned int devfn, - int severity); + int severity, + struct aer_capability_regs *aer_regs); #endif //_AER_H_ -- cgit v0.10.2 From 2d403f7b198163d14a37ab79de33e27e390bb3b1 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 30 May 2013 12:44:47 -0700 Subject: ARM: OMAP3: Fix iva2_pwrdm settings for 3703 Commit a819c4f1 (ARM: OMAP3: PM: Only access IVA if one exists) changed PM to not access IVA registers on omaps that don't have them. Turns out we still need to idle iva2 as otherwise iva2_pwrdm will stay on and block deeper idle states. It seems that the only part of the reset that may not be needed is the setting of the iva2 boot mode to idle. But as that register seems to be there and is harmless if no iva2 is on the SoC, it's probably safest to do the complete reset. Acked-by: Mark A. Greer Acked-by: Kevin Hilman Tested-by: Yegor Yefremov Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index c018593..5a2d803 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -546,8 +546,10 @@ static void __init prcm_setup_regs(void) /* Clear any pending PRCM interrupts */ omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); - if (omap3_has_iva()) - omap3_iva_idle(); + /* + * We need to idle iva2_pwrdm even on am3703 with no iva2. + */ + omap3_iva_idle(); omap3_d2d_idle(); } -- cgit v0.10.2 From eb54d43707c69340581940e1fcaecb4d7d17b814 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Tue, 14 May 2013 14:37:56 -0400 Subject: NFS: Fix security flavor negotiation with legacy binary mounts Darrick J. Wong reports: > I have a kvm-based testing setup that netboots VMs over NFS, the > client end of which seems to have broken somehow in 3.10-rc1. The > server's exports file looks like this: > > /storage/mtr/x64 192.168.122.0/24(ro,sync,no_root_squash,no_subtree_check) > > On the client end (inside the VM), the initrd runs the following > command to try to mount the rootfs over NFS: > > # mount -o nolock -o ro -o retrans=10 192.168.122.1:/storage/mtr/x64/ /root > > (Note: This is the busybox mount command.) > > The mount fails with -EINVAL. Commit 4580a92d44 "NFS: Use server-recommended security flavor by default (NFSv3)" introduced a behavior regression for NFS mounts done via a legacy binary mount(2) call. Ensure that a default security flavor is specified for legacy binary mount requests, since they do not invoke nfs_select_flavor() in the kernel. Busybox uses klibc's nfsmount command, which performs NFS mounts using the legacy binary mount data format. /sbin/mount.nfs is not affected by this regression. Reported-by: Darrick J. Wong Signed-off-by: Chuck Lever Tested-by: Darrick J. Wong Acked-by: Weston Andros Adamson Signed-off-by: Trond Myklebust diff --git a/fs/nfs/super.c b/fs/nfs/super.c index a366107..2d7525f 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -1942,6 +1942,7 @@ static int nfs23_validate_mount_data(void *options, args->namlen = data->namlen; args->bsize = data->bsize; + args->auth_flavors[0] = RPC_AUTH_UNIX; if (data->flags & NFS_MOUNT_SECFLAVOUR) args->auth_flavors[0] = data->pseudoflavor; if (!args->nfs_server.hostname) @@ -2637,6 +2638,7 @@ static int nfs4_validate_mount_data(void *options, goto out_no_address; args->nfs_server.port = ntohs(((struct sockaddr_in *)sap)->sin_port); + args->auth_flavors[0] = RPC_AUTH_UNIX; if (data->auth_flavourlen) { if (data->auth_flavourlen > 1) goto out_inval_auth; -- cgit v0.10.2 From 5489e948dc0f41a249c109d74612bf5aceab8f38 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 30 May 2013 22:23:44 +0200 Subject: MAINTAINERS: Framebuffer Layer maintainers update Tomi and I will now take care of the Framebuffer Layer The git tree is now on kernel.org Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Tomi Valkeinen Cc: Olof Johansson Cc: Andrew Morton Cc: Arnd Bergmann Cc: Florian Tobias Schandinat Cc: linux-fbdev@vger.kernel.org Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index fd3a495..7714c3c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3322,11 +3322,12 @@ F: drivers/net/wan/dlci.c F: drivers/net/wan/sdla.c FRAMEBUFFER LAYER -M: Florian Tobias Schandinat +M: Jean-Christophe Plagniol-Villard +M: Tomi Valkeinen L: linux-fbdev@vger.kernel.org W: http://linux-fbdev.sourceforge.net/ Q: http://patchwork.kernel.org/project/linux-fbdev/list/ -T: git git://github.com/schandinat/linux-2.6.git fbdev-next +T: git git://git.kernel.org/pub/scm/linux/kernel/git/plagnioj/linux-fbdev.git S: Maintained F: Documentation/fb/ F: Documentation/devicetree/bindings/fb/ -- cgit v0.10.2 From 08fb39051f5581df45ae2a20c6cf2d0c4cddf7c2 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:00 +1000 Subject: xfs: avoid nesting transactions in xfs_qm_scall_setqlim() Lockdep reports: ============================================= [ INFO: possible recursive locking detected ] 3.9.0+ #3 Not tainted --------------------------------------------- setquota/28368 is trying to acquire lock: (sb_internal){++++.?}, at: [] xfs_trans_alloc+0x26/0x50 but task is already holding lock: (sb_internal){++++.?}, at: [] xfs_trans_alloc+0x26/0x50 from xfs_qm_scall_setqlim()->xfs_dqread() when a dquot needs to be allocated. xfs_qm_scall_setqlim() is starting a transaction and then not passing it into xfs_qm_dqet() and so it starts it's own transaction when allocating the dquot. Splat! Fix this by not allocating the dquot in xfs_qm_scall_setqlim() inside the setqlim transaction. This requires getting the dquot first (and allocating it if necessary) then dropping and relocking the dquot before joining it to the setqlim transaction. Reported-by: Michael L. Semon Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit f648167f3ac79018c210112508c732ea9bf67c7b) diff --git a/fs/xfs/xfs_qm_syscalls.c b/fs/xfs/xfs_qm_syscalls.c index c41190c..6cdf6ff 100644 --- a/fs/xfs/xfs_qm_syscalls.c +++ b/fs/xfs/xfs_qm_syscalls.c @@ -489,31 +489,36 @@ xfs_qm_scall_setqlim( if ((newlim->d_fieldmask & XFS_DQ_MASK) == 0) return 0; - tp = xfs_trans_alloc(mp, XFS_TRANS_QM_SETQLIM); - error = xfs_trans_reserve(tp, 0, XFS_QM_SETQLIM_LOG_RES(mp), - 0, 0, XFS_DEFAULT_LOG_COUNT); - if (error) { - xfs_trans_cancel(tp, 0); - return (error); - } - /* * We don't want to race with a quotaoff so take the quotaoff lock. - * (We don't hold an inode lock, so there's nothing else to stop - * a quotaoff from happening). (XXXThis doesn't currently happen - * because we take the vfslock before calling xfs_qm_sysent). + * We don't hold an inode lock, so there's nothing else to stop + * a quotaoff from happening. */ mutex_lock(&q->qi_quotaofflock); /* - * Get the dquot (locked), and join it to the transaction. - * Allocate the dquot if this doesn't exist. + * Get the dquot (locked) before we start, as we need to do a + * transaction to allocate it if it doesn't exist. Once we have the + * dquot, unlock it so we can start the next transaction safely. We hold + * a reference to the dquot, so it's safe to do this unlock/lock without + * it being reclaimed in the mean time. */ - if ((error = xfs_qm_dqget(mp, NULL, id, type, XFS_QMOPT_DQALLOC, &dqp))) { - xfs_trans_cancel(tp, XFS_TRANS_ABORT); + error = xfs_qm_dqget(mp, NULL, id, type, XFS_QMOPT_DQALLOC, &dqp); + if (error) { ASSERT(error != ENOENT); goto out_unlock; } + xfs_dqunlock(dqp); + + tp = xfs_trans_alloc(mp, XFS_TRANS_QM_SETQLIM); + error = xfs_trans_reserve(tp, 0, XFS_QM_SETQLIM_LOG_RES(mp), + 0, 0, XFS_DEFAULT_LOG_COUNT); + if (error) { + xfs_trans_cancel(tp, 0); + goto out_rele; + } + + xfs_dqlock(dqp); xfs_trans_dqjoin(tp, dqp); ddq = &dqp->q_core; @@ -621,9 +626,10 @@ xfs_qm_scall_setqlim( xfs_trans_log_dquot(tp, dqp); error = xfs_trans_commit(tp, 0); - xfs_qm_dqrele(dqp); - out_unlock: +out_rele: + xfs_qm_dqrele(dqp); +out_unlock: mutex_unlock(&q->qi_quotaofflock); return error; } -- cgit v0.10.2 From 2962f5a5dcc56f69cbf62121a7be67cc15d6940b Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 27 May 2013 16:38:25 +1000 Subject: xfs: kill suid/sgid through the truncate path. XFS has failed to kill suid/sgid bits correctly when truncating files of non-zero size since commit c4ed4243 ("xfs: split xfs_setattr") introduced in the 3.1 kernel. Fix it. Fix it. cc: stable kernel Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Signed-off-by: Ben Myers (cherry picked from commit 56c19e89b38618390addfc743d822f99519055c6) diff --git a/fs/xfs/xfs_iops.c b/fs/xfs/xfs_iops.c index d82efaa..ca9ecaa 100644 --- a/fs/xfs/xfs_iops.c +++ b/fs/xfs/xfs_iops.c @@ -455,6 +455,28 @@ xfs_vn_getattr( return 0; } +static void +xfs_setattr_mode( + struct xfs_trans *tp, + struct xfs_inode *ip, + struct iattr *iattr) +{ + struct inode *inode = VFS_I(ip); + umode_t mode = iattr->ia_mode; + + ASSERT(tp); + ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL)); + + if (!in_group_p(inode->i_gid) && !capable(CAP_FSETID)) + mode &= ~S_ISGID; + + ip->i_d.di_mode &= S_IFMT; + ip->i_d.di_mode |= mode & ~S_IFMT; + + inode->i_mode &= S_IFMT; + inode->i_mode |= mode & ~S_IFMT; +} + int xfs_setattr_nonsize( struct xfs_inode *ip, @@ -606,18 +628,8 @@ xfs_setattr_nonsize( /* * Change file access modes. */ - if (mask & ATTR_MODE) { - umode_t mode = iattr->ia_mode; - - if (!in_group_p(inode->i_gid) && !capable(CAP_FSETID)) - mode &= ~S_ISGID; - - ip->i_d.di_mode &= S_IFMT; - ip->i_d.di_mode |= mode & ~S_IFMT; - - inode->i_mode &= S_IFMT; - inode->i_mode |= mode & ~S_IFMT; - } + if (mask & ATTR_MODE) + xfs_setattr_mode(tp, ip, iattr); /* * Change file access or modified times. @@ -714,9 +726,8 @@ xfs_setattr_size( return XFS_ERROR(error); ASSERT(S_ISREG(ip->i_d.di_mode)); - ASSERT((mask & (ATTR_MODE|ATTR_UID|ATTR_GID|ATTR_ATIME|ATTR_ATIME_SET| - ATTR_MTIME_SET|ATTR_KILL_SUID|ATTR_KILL_SGID| - ATTR_KILL_PRIV|ATTR_TIMES_SET)) == 0); + ASSERT((mask & (ATTR_UID|ATTR_GID|ATTR_ATIME|ATTR_ATIME_SET| + ATTR_MTIME_SET|ATTR_KILL_PRIV|ATTR_TIMES_SET)) == 0); if (!(flags & XFS_ATTR_NOLOCK)) { lock_flags |= XFS_IOLOCK_EXCL; @@ -860,6 +871,12 @@ xfs_setattr_size( xfs_inode_clear_eofblocks_tag(ip); } + /* + * Change file access modes. + */ + if (mask & ATTR_MODE) + xfs_setattr_mode(tp, ip, iattr); + if (mask & ATTR_CTIME) { inode->i_ctime = iattr->ia_ctime; ip->i_d.di_ctime.t_sec = iattr->ia_ctime.tv_sec; -- cgit v0.10.2 From 7d2ffe80aa000a149246b3745968634192eb5358 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 27 May 2013 16:38:23 +1000 Subject: xfs: fix split buffer vector log recovery support A long time ago in a galaxy far away.... .. the was a commit made to fix some ilinux specific "fragmented buffer" log recovery problem: http://oss.sgi.com/cgi-bin/gitweb.cgi?p=archive/xfs-import.git;a=commitdiff;h=b29c0bece51da72fb3ff3b61391a391ea54e1603 That problem occurred when a contiguous dirty region of a buffer was split across across two pages of an unmapped buffer. It's been a long time since that has been done in XFS, and the changes to log the entire inode buffers for CRC enabled filesystems has re-introduced that corner case. And, of course, it turns out that the above commit didn't actually fix anything - it just ensured that log recovery is guaranteed to fail when this situation occurs. And now for the gory details. xfstest xfs/085 is failing with this assert: XFS (vdb): bad number of regions (0) in inode log format XFS: Assertion failed: 0, file: fs/xfs/xfs_log_recover.c, line: 1583 Largely undocumented factoid #1: Log recovery depends on all log buffer format items starting with this format: struct foo_log_format { __uint16_t type; __uint16_t size; .... As recoery uses the size field and assumptions about 32 bit alignment in decoding format items. So don't pay much attention to the fact log recovery thinks that it decoding an inode log format item - it just uses them to determine what the size of the item is. But why would it see a log format item with a zero size? Well, luckily enough xfs_logprint uses the same code and gives the same error, so with a bit of gdb magic, it turns out that it isn't a log format that is being decoded. What logprint tells us is this: Oper (130): tid: a0375e1a len: 28 clientid: TRANS flags: none BUF: #regs: 2 start blkno: 144 (0x90) len: 16 bmap size: 2 flags: 0x4000 Oper (131): tid: a0375e1a len: 4096 clientid: TRANS flags: none BUF DATA ---------------------------------------------------------------------------- Oper (132): tid: a0375e1a len: 4096 clientid: TRANS flags: none xfs_logprint: unknown log operation type (4e49) ********************************************************************** * ERROR: data block=2 * ********************************************************************** That we've got a buffer format item (oper 130) that has two regions; the format item itself and one dirty region. The subsequent region after the buffer format item and it's data is them what we are tripping over, and the first bytes of it at an inode magic number. Not a log opheader like there is supposed to be. That means there's a problem with the buffer format item. It's dirty data region is 4096 bytes, and it contains - you guessed it - initialised inodes. But inode buffers are 8k, not 4k, and we log them in their entirety. So something is wrong here. The buffer format item contains: (gdb) p /x *(struct xfs_buf_log_format *)in_f $22 = {blf_type = 0x123c, blf_size = 0x2, blf_flags = 0x4000, blf_len = 0x10, blf_blkno = 0x90, blf_map_size = 0x2, blf_data_map = {0xffffffff, 0xffffffff, .... }} Two regions, and a signle dirty contiguous region of 64 bits. 64 * 128 = 8k, so this should be followed by a single 8k region of data. And the blf_flags tell us that the type of buffer is a XFS_BLFT_DINO_BUF. It contains inodes. And because it doesn't have the XFS_BLF_INODE_BUF flag set, that means it's an inode allocation buffer. So, it should be followed by 8k of inode data. But we know that the next region has a header of: (gdb) p /x *ohead $25 = {oh_tid = 0x1a5e37a0, oh_len = 0x100000, oh_clientid = 0x69, oh_flags = 0x0, oh_res2 = 0x0} and so be32_to_cpu(oh_len) = 0x1000 = 4096 bytes. It's simply not long enough to hold all the logged data. There must be another region. There is - there's a following opheader for another 4k of data that contains the other half of the inode cluster data - the one we assert fail on because it's not a log format header. So why is the second part of the data not being accounted to the correct buffer log format structure? It took a little more work with gdb to work out that the buffer log format structure was both expecting it to be there but hadn't accounted for it. It was at that point I went to the kernel code, as clearly this wasn't a bug in xfs_logprint and the kernel was writing bad stuff to the log. First port of call was the buffer item formatting code, and the discontiguous memory/contiguous dirty region handling code immediately stood out. I've wondered for a long time why the code had this comment in it: vecp->i_addr = xfs_buf_offset(bp, buffer_offset); vecp->i_len = nbits * XFS_BLF_CHUNK; vecp->i_type = XLOG_REG_TYPE_BCHUNK; /* * You would think we need to bump the nvecs here too, but we do not * this number is used by recovery, and it gets confused by the boundary * split here * nvecs++; */ vecp++; And it didn't account for the extra vector pointer. The case being handled here is that a contiguous dirty region lies across a boundary that cannot be memcpy()d across, and so has to be split into two separate operations for xlog_write() to perform. What this code assumes is that what is written to the log is two consecutive blocks of data that are accounted in the buf log format item as the same contiguous dirty region and so will get decoded as such by the log recovery code. The thing is, xlog_write() knows nothing about this, and so just does it's normal thing of adding an opheader for each vector. That means the 8k region gets written to the log as two separate regions of 4k each, but because nvecs has not been incremented, the buf log format item accounts for only one of them. Hence when we come to log recovery, we process the first 4k region and then expect to come across a new item that starts with a log format structure of some kind that tells us whenteh next data is going to be. Instead, we hit raw buffer data and things go bad real quick. So, the commit from 2002 that commented out nvecs++ is just plain wrong. It breaks log recovery completely, and it would seem the only reason this hasn't been since then is that we don't log large contigous regions of multi-page unmapped buffers very often. Never would be a closer estimate, at least until the CRC code came along.... So, lets fix that by restoring the nvecs accounting for the extra region when we hit this case..... .... and there's the problemin log recovery it is apparently working around: XFS: Assertion failed: i == item->ri_total, file: fs/xfs/xfs_log_recover.c, line: 2135 Yup, xlog_recover_do_reg_buffer() doesn't handle contigous dirty regions being broken up into multiple regions by the log formatting code. That's an easy fix, though - if the number of contiguous dirty bits exceeds the length of the region being copied out of the log, only account for the number of dirty bits that region covers, and then loop again and copy more from the next region. It's a 2 line fix. Now xfstests xfs/085 passes, we have one less piece of mystery code, and one more important piece of knowledge about how to structure new log format items.. Signed-off-by: Dave Chinner Reviewed-by: Mark Tinguely Signed-off-by: Ben Myers (cherry picked from commit 709da6a61aaf12181a8eea8443919ae5fc1b731d) diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c index cf26347..4ec4317 100644 --- a/fs/xfs/xfs_buf_item.c +++ b/fs/xfs/xfs_buf_item.c @@ -262,12 +262,7 @@ xfs_buf_item_format_segment( vecp->i_addr = xfs_buf_offset(bp, buffer_offset); vecp->i_len = nbits * XFS_BLF_CHUNK; vecp->i_type = XLOG_REG_TYPE_BCHUNK; -/* - * You would think we need to bump the nvecs here too, but we do not - * this number is used by recovery, and it gets confused by the boundary - * split here - * nvecs++; - */ + nvecs++; vecp++; first_bit = next_bit; last_bit = next_bit; diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index 93f03ec..d9e4d3c 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -2097,6 +2097,17 @@ xlog_recover_do_reg_buffer( ((uint)bit << XFS_BLF_SHIFT) + (nbits << XFS_BLF_SHIFT)); /* + * The dirty regions logged in the buffer, even though + * contiguous, may span multiple chunks. This is because the + * dirty region may span a physical page boundary in a buffer + * and hence be split into two separate vectors for writing into + * the log. Hence we need to trim nbits back to the length of + * the current region being copied out of the log. + */ + if (item->ri_buf[i].i_len < (nbits << XFS_BLF_SHIFT)) + nbits = item->ri_buf[i].i_len >> XFS_BLF_SHIFT; + + /* * Do a sanity check if this is a dquot buffer. Just checking * the first dquot in the buffer should do. XXXThis is * probably a good thing to do for other buf types also. -- cgit v0.10.2 From 1de09d1ae48152e56399aba0bfd984fb0ddae6b0 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 27 May 2013 16:38:20 +1000 Subject: xfs: fix incorrect remote symlink block count When CRCs are enabled, the number of blocks needed to hold a remote symlink on a 1k block size filesystem may be 2 instead of 1. The transaction reservation for the allocated blocks was not taking this into account and only allocating one block. Hence when trying to read or invalidate such symlinks, we are mapping a hole where there should be a block and things go bad at that point. Fix the reservation to use the correct block count, clean up the block count calculation similar to the remote attribute calculation, and add a debug guard to detect when we don't write the entire symlink to disk. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Reviewed-by: Brian Foster Signed-off-by: Ben Myers (cherry picked from commit 321a95839e65db3759a07a3655184b0283af90fe) diff --git a/fs/xfs/xfs_symlink.c b/fs/xfs/xfs_symlink.c index 5f234389..195a403 100644 --- a/fs/xfs/xfs_symlink.c +++ b/fs/xfs/xfs_symlink.c @@ -56,16 +56,9 @@ xfs_symlink_blocks( struct xfs_mount *mp, int pathlen) { - int fsblocks = 0; - int len = pathlen; + int buflen = XFS_SYMLINK_BUF_SPACE(mp, mp->m_sb.sb_blocksize); - do { - fsblocks++; - len -= XFS_SYMLINK_BUF_SPACE(mp, mp->m_sb.sb_blocksize); - } while (len > 0); - - ASSERT(fsblocks <= XFS_SYMLINK_MAPS); - return fsblocks; + return (pathlen + buflen - 1) / buflen; } static int @@ -405,7 +398,7 @@ xfs_symlink( if (pathlen <= XFS_LITINO(mp, dp->i_d.di_version)) fs_blocks = 0; else - fs_blocks = XFS_B_TO_FSB(mp, pathlen); + fs_blocks = xfs_symlink_blocks(mp, pathlen); resblks = XFS_SYMLINK_SPACE_RES(mp, link_name->len, fs_blocks); error = xfs_trans_reserve(tp, resblks, XFS_SYMLINK_LOG_RES(mp), 0, XFS_TRANS_PERM_LOG_RES, XFS_SYMLINK_LOG_COUNT); @@ -512,7 +505,7 @@ xfs_symlink( cur_chunk = target_path; offset = 0; for (n = 0; n < nmaps; n++) { - char *buf; + char *buf; d = XFS_FSB_TO_DADDR(mp, mval[n].br_startblock); byte_cnt = XFS_FSB_TO_B(mp, mval[n].br_blockcount); @@ -525,9 +518,7 @@ xfs_symlink( bp->b_ops = &xfs_symlink_buf_ops; byte_cnt = XFS_SYMLINK_BUF_SPACE(mp, byte_cnt); - if (pathlen < byte_cnt) { - byte_cnt = pathlen; - } + byte_cnt = min(byte_cnt, pathlen); buf = bp->b_addr; buf += xfs_symlink_hdr_set(mp, ip->i_ino, offset, @@ -542,6 +533,7 @@ xfs_symlink( xfs_trans_log_buf(tp, bp, 0, (buf + byte_cnt - 1) - (char *)bp->b_addr); } + ASSERT(pathlen == 0); } /* -- cgit v0.10.2 From e7927e879d12d27aa06b9bbed57cc32dcd7d17fd Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 27 May 2013 16:38:26 +1000 Subject: xfs: add fsgeom flag for v5 superblock support. Currently userspace has no way of determining that a filesystem is CRC enabled. Add a flag to the XFS_IOC_FSGEOMETRY ioctl output to indicate that the filesystem has v5 superblock support enabled. This will allow xfs_info to correctly report the state of the filesystem. Signed-off-by: Dave Chinner Reviewed-by: Eric Sandeen Reviewed-by: Brian Foster Signed-off-by: Ben Myers (cherry picked from commit 74137fff067961c9aca1e14d073805c3de8549bd) diff --git a/fs/xfs/xfs_fs.h b/fs/xfs/xfs_fs.h index 6dda3f9..d046955 100644 --- a/fs/xfs/xfs_fs.h +++ b/fs/xfs/xfs_fs.h @@ -236,6 +236,7 @@ typedef struct xfs_fsop_resblks { #define XFS_FSOP_GEOM_FLAGS_PROJID32 0x0800 /* 32-bit project IDs */ #define XFS_FSOP_GEOM_FLAGS_DIRV2CI 0x1000 /* ASCII only CI names */ #define XFS_FSOP_GEOM_FLAGS_LAZYSB 0x4000 /* lazy superblock counters */ +#define XFS_FSOP_GEOM_FLAGS_V5SB 0x8000 /* version 5 superblock */ /* diff --git a/fs/xfs/xfs_fsops.c b/fs/xfs/xfs_fsops.c index 87595b2..3c3644e 100644 --- a/fs/xfs/xfs_fsops.c +++ b/fs/xfs/xfs_fsops.c @@ -99,7 +99,9 @@ xfs_fs_geometry( (xfs_sb_version_hasattr2(&mp->m_sb) ? XFS_FSOP_GEOM_FLAGS_ATTR2 : 0) | (xfs_sb_version_hasprojid32bit(&mp->m_sb) ? - XFS_FSOP_GEOM_FLAGS_PROJID32 : 0); + XFS_FSOP_GEOM_FLAGS_PROJID32 : 0) | + (xfs_sb_version_hascrc(&mp->m_sb) ? + XFS_FSOP_GEOM_FLAGS_V5SB : 0); geo->logsectsize = xfs_sb_version_hassector(&mp->m_sb) ? mp->m_sb.sb_logsectsize : BBSIZE; geo->rtsectsize = mp->m_sb.sb_blocksize; -- cgit v0.10.2 From 7c9950fd2ac97431230544142d5e652e1b948372 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 27 May 2013 16:38:24 +1000 Subject: xfs: disable swap extents ioctl on CRC enabled filesystems Currently, swapping extents from one inode to another is a simple act of switching data and attribute forks from one inode to another. This, unfortunately in no longer so simple with CRC enabled filesystems as there is owner information embedded into the BMBT blocks that are swapped between inodes. Hence swapping the forks between inodes results in the inodes having mapping blocks that point to the wrong owner and hence are considered corrupt. To fix this we need an extent tree block or record based swap algorithm so that the BMBT block owner information can be updated atomically in the swap transaction. This is a significant piece of new work, so for the moment simply don't allow swap extent operations to succeed on CRC enabled filesystems. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Reviewed-by: Brian Foster Signed-off-by: Ben Myers (cherry picked from commit 02f75405a75eadfb072609f6bf839e027de6a29a) diff --git a/fs/xfs/xfs_dfrag.c b/fs/xfs/xfs_dfrag.c index f852b08..c407e1c 100644 --- a/fs/xfs/xfs_dfrag.c +++ b/fs/xfs/xfs_dfrag.c @@ -219,6 +219,14 @@ xfs_swap_extents( int taforkblks = 0; __uint64_t tmp; + /* + * We have no way of updating owner information in the BMBT blocks for + * each inode on CRC enabled filesystems, so to avoid corrupting the + * this metadata we simply don't allow extent swaps to occur. + */ + if (xfs_sb_version_hascrc(&mp->m_sb)) + return XFS_ERROR(EINVAL); + tempifp = kmem_alloc(sizeof(xfs_ifork_t), KM_MAYFAIL); if (!tempifp) { error = XFS_ERROR(ENOMEM); -- cgit v0.10.2 From e400d27d1690d609f203f2d7d8efebc98cbc3089 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 28 May 2013 18:37:17 +1000 Subject: xfs: fix dir3 freespace block corruption When the directory freespace index grows to a second block (2017 4k data blocks in the directory), the initialisation of the second new block header goes wrong. The write verifier fires a corruption error indicating that the block number in the header is zero. This was being tripped by xfs/110. The problem is that the initialisation of the new block is done just fine in xfs_dir3_free_get_buf(), but the caller then users a dirv2 structure to zero on-disk header fields that xfs_dir3_free_get_buf() has already zeroed. These lined up with the block number in the dir v3 header format. While looking at this, I noticed that the struct xfs_dir3_free_hdr() had 4 bytes of padding in it that wasn't defined as padding or being zeroed by the initialisation. Add a pad field declaration and fully zero the on disk and in-core headers in xfs_dir3_free_get_buf() so that this is never an issue in the future. Note that this doesn't change the on-disk layout, just makes the 32 bits of padding in the layout explicit. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 5ae6e6a401957698f2bd8c9f4a86d86d02199fea) diff --git a/fs/xfs/xfs_dir2_format.h b/fs/xfs/xfs_dir2_format.h index a3b1bd8..995f1f5 100644 --- a/fs/xfs/xfs_dir2_format.h +++ b/fs/xfs/xfs_dir2_format.h @@ -715,6 +715,7 @@ struct xfs_dir3_free_hdr { __be32 firstdb; /* db of first entry */ __be32 nvalid; /* count of valid entries */ __be32 nused; /* count of used entries */ + __be32 pad; /* 64 bit alignment. */ }; struct xfs_dir3_free { diff --git a/fs/xfs/xfs_dir2_node.c b/fs/xfs/xfs_dir2_node.c index 5246de4..2226a00 100644 --- a/fs/xfs/xfs_dir2_node.c +++ b/fs/xfs/xfs_dir2_node.c @@ -263,18 +263,19 @@ xfs_dir3_free_get_buf( * Initialize the new block to be empty, and remember * its first slot as our empty slot. */ - hdr.magic = XFS_DIR2_FREE_MAGIC; - hdr.firstdb = 0; - hdr.nused = 0; - hdr.nvalid = 0; + memset(bp->b_addr, 0, sizeof(struct xfs_dir3_free_hdr)); + memset(&hdr, 0, sizeof(hdr)); + if (xfs_sb_version_hascrc(&mp->m_sb)) { struct xfs_dir3_free_hdr *hdr3 = bp->b_addr; hdr.magic = XFS_DIR3_FREE_MAGIC; + hdr3->hdr.blkno = cpu_to_be64(bp->b_bn); hdr3->hdr.owner = cpu_to_be64(dp->i_ino); uuid_copy(&hdr3->hdr.uuid, &mp->m_sb.sb_uuid); - } + } else + hdr.magic = XFS_DIR2_FREE_MAGIC; xfs_dir3_free_hdr_to_disk(bp->b_addr, &hdr); *bpp = bp; return 0; @@ -1921,8 +1922,6 @@ xfs_dir2_node_addname_int( */ freehdr.firstdb = (fbno - XFS_DIR2_FREE_FIRSTDB(mp)) * xfs_dir3_free_max_bests(mp); - free->hdr.nvalid = 0; - free->hdr.nused = 0; } else { free = fbp->b_addr; bests = xfs_dir3_free_bests_p(mp, free); -- cgit v0.10.2 From 9531e2de6b7f04bd734b4bbc1e16a6955121615a Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:01 +1000 Subject: xfs: remote attribute allocation may be contiguous When CRCs are enabled, there may be multiple allocations made if the headers cause a length overflow. This, however, does not mean that the number of headers required increases, as the second and subsequent extents may be contiguous with the previous extent. Hence when we map the extents to write the attribute data, we may end up with less extents than allocations made. Hence the assertion that we consume the number of headers we calculated in the allocation loop is incorrect and needs to be removed. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 90253cf142469a40f89f989904abf0a1e500e1a6) diff --git a/fs/xfs/xfs_attr_remote.c b/fs/xfs/xfs_attr_remote.c index dee8446..aad95b0 100644 --- a/fs/xfs/xfs_attr_remote.c +++ b/fs/xfs/xfs_attr_remote.c @@ -359,6 +359,11 @@ xfs_attr_rmtval_set( * into requiring more blocks. e.g. for 512 byte blocks, we'll * spill for another block every 9 headers we require in this * loop. + * + * Note that this can result in contiguous allocation of blocks, + * so we don't use all the space we allocate for headers as we + * have one less header for each contiguous allocation that + * occurs in the map/write loop below. */ if (crcs && blkcnt == 0) { int total_len; @@ -439,7 +444,6 @@ xfs_attr_rmtval_set( lblkno += map.br_blockcount; } ASSERT(valuelen == 0); - ASSERT(hdrcnt == 0); return 0; } -- cgit v0.10.2 From 551b382f5368900d6d82983505cb52553c946a2b Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:02 +1000 Subject: xfs: remote attribute read too short Reading a maximally size remote attribute fails when CRCs are enabled with this verification error: XFS (vdb): remote attribute header does not match required off/len/owner) There are two reasons for this, the first being that the length of the buffer being read is determined from the args->rmtblkcnt which doesn't take into account CRC headers. Hence the mapped length ends up being too short and so we need to calculate it directly from the value length. The second is that the byte count of valid data within a buffer is capped by the length of the data and so doesn't take into account that the buffer might be longer due to headers. Hence we need to calculate the data space in the buffer first before calculating the actual byte count of data. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 913e96bc292e1bb248854686c79d6545ef3ee720) diff --git a/fs/xfs/xfs_attr_remote.c b/fs/xfs/xfs_attr_remote.c index aad95b0..bcdc07c 100644 --- a/fs/xfs/xfs_attr_remote.c +++ b/fs/xfs/xfs_attr_remote.c @@ -52,9 +52,11 @@ xfs_attr3_rmt_blocks( struct xfs_mount *mp, int attrlen) { - int buflen = XFS_ATTR3_RMT_BUF_SPACE(mp, - mp->m_sb.sb_blocksize); - return (attrlen + buflen - 1) / buflen; + if (xfs_sb_version_hascrc(&mp->m_sb)) { + int buflen = XFS_ATTR3_RMT_BUF_SPACE(mp, mp->m_sb.sb_blocksize); + return (attrlen + buflen - 1) / buflen; + } + return XFS_B_TO_FSB(mp, attrlen); } static bool @@ -206,8 +208,9 @@ xfs_attr_rmtval_get( while (valuelen > 0) { nmap = ATTR_RMTVALUE_MAPSIZE; + blkcnt = xfs_attr3_rmt_blocks(mp, valuelen); error = xfs_bmapi_read(args->dp, (xfs_fileoff_t)lblkno, - args->rmtblkcnt, map, &nmap, + blkcnt, map, &nmap, XFS_BMAPI_ATTRFORK); if (error) return error; @@ -227,8 +230,8 @@ xfs_attr_rmtval_get( if (error) return error; - byte_cnt = min_t(int, valuelen, BBTOB(bp->b_length)); - byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, byte_cnt); + byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, BBTOB(bp->b_length)); + byte_cnt = min_t(int, valuelen, byte_cnt); src = bp->b_addr; if (xfs_sb_version_hascrc(&mp->m_sb)) { -- cgit v0.10.2 From 26f714450c3907ce07c41a0bd1bea40368e0b4da Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:03 +1000 Subject: xfs: remote attribute tail zeroing does too much When an attribute data does not fill then entire remote block, we zero the remaining part of the buffer. This, however, needs to take into account that the buffer has a header, and so the offset where zeroing starts and the length of zeroing need to take this into account. Otherwise we end up with zeros over the end of the attribute value when CRCs are enabled. While there, make sure we only ask to map an extent that covers the remaining range of the attribute, rather than asking every time for the full length of remote data. If the remote attribute blocks are contiguous with other parts of the attribute tree, it will map those blocks as well and we can potentially zero them incorrectly. We can also get buffer size mistmatches when trying to read or remove the remote attribute, and this can lead to not finding the correct buffer when looking it up in cache. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 4af3644c9a53eb2f1ecf69cc53576561b64be4c6) diff --git a/fs/xfs/xfs_attr_remote.c b/fs/xfs/xfs_attr_remote.c index bcdc07c..e207bf0 100644 --- a/fs/xfs/xfs_attr_remote.c +++ b/fs/xfs/xfs_attr_remote.c @@ -296,10 +296,7 @@ xfs_attr_rmtval_set( * and we may not need that many, so we have to handle this when * allocating the blocks below. */ - if (!crcs) - blkcnt = XFS_B_TO_FSB(mp, args->valuelen); - else - blkcnt = xfs_attr3_rmt_blocks(mp, args->valuelen); + blkcnt = xfs_attr3_rmt_blocks(mp, args->valuelen); error = xfs_bmap_first_unused(args->trans, args->dp, blkcnt, &lfileoff, XFS_ATTR_FORK); @@ -394,8 +391,11 @@ xfs_attr_rmtval_set( */ lblkno = args->rmtblkno; valuelen = args->valuelen; + blkcnt = args->rmtblkcnt; while (valuelen > 0) { int byte_cnt; + int hdr_size; + int dblkcnt; char *buf; /* @@ -404,7 +404,7 @@ xfs_attr_rmtval_set( xfs_bmap_init(args->flist, args->firstblock); nmap = 1; error = xfs_bmapi_read(dp, (xfs_fileoff_t)lblkno, - args->rmtblkcnt, &map, &nmap, + blkcnt, &map, &nmap, XFS_BMAPI_ATTRFORK); if (error) return(error); @@ -413,26 +413,25 @@ xfs_attr_rmtval_set( (map.br_startblock != HOLESTARTBLOCK)); dblkno = XFS_FSB_TO_DADDR(mp, map.br_startblock), - blkcnt = XFS_FSB_TO_BB(mp, map.br_blockcount); + dblkcnt = XFS_FSB_TO_BB(mp, map.br_blockcount); - bp = xfs_buf_get(mp->m_ddev_targp, dblkno, blkcnt, 0); + bp = xfs_buf_get(mp->m_ddev_targp, dblkno, dblkcnt, 0); if (!bp) return ENOMEM; bp->b_ops = &xfs_attr3_rmt_buf_ops; - - byte_cnt = BBTOB(bp->b_length); - byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, byte_cnt); - if (valuelen < byte_cnt) - byte_cnt = valuelen; - buf = bp->b_addr; - buf += xfs_attr3_rmt_hdr_set(mp, dp->i_ino, offset, + + byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, BBTOB(bp->b_length)); + byte_cnt = min_t(int, valuelen, byte_cnt); + hdr_size = xfs_attr3_rmt_hdr_set(mp, dp->i_ino, offset, byte_cnt, bp); - memcpy(buf, src, byte_cnt); + ASSERT(hdr_size + byte_cnt <= BBTOB(bp->b_length)); - if (byte_cnt < BBTOB(bp->b_length)) - xfs_buf_zero(bp, byte_cnt, - BBTOB(bp->b_length) - byte_cnt); + memcpy(buf + hdr_size, src, byte_cnt); + + if (byte_cnt + hdr_size < BBTOB(bp->b_length)) + xfs_buf_zero(bp, byte_cnt + hdr_size, + BBTOB(bp->b_length) - byte_cnt - hdr_size); error = xfs_bwrite(bp); /* GROT: NOTE: synchronous write */ xfs_buf_relse(bp); @@ -442,9 +441,9 @@ xfs_attr_rmtval_set( src += byte_cnt; valuelen -= byte_cnt; offset += byte_cnt; - hdrcnt--; lblkno += map.br_blockcount; + blkcnt -= map.br_blockcount; } ASSERT(valuelen == 0); return 0; -- cgit v0.10.2 From 58a72281555bf301f6dff24db2db205c87ef8db1 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:04 +1000 Subject: xfs: correctly map remote attr buffers during removal If we don't map the buffers correctly (same as for get/set operations) then the incore buffer lookup will fail. If a block number matches but a length is wrong, then debug kernels will ASSERT fail in _xfs_buf_find() due to the length mismatch. Ensure that we map the buffers correctly by basing the length of the buffer on the attribute data length rather than the remote block count. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 6863ef8449f1908c19f43db572e4474f24a1e9da) diff --git a/fs/xfs/xfs_attr_remote.c b/fs/xfs/xfs_attr_remote.c index e207bf0..d8bcb2d 100644 --- a/fs/xfs/xfs_attr_remote.c +++ b/fs/xfs/xfs_attr_remote.c @@ -468,19 +468,25 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args) mp = args->dp->i_mount; /* - * Roll through the "value", invalidating the attribute value's - * blocks. + * Roll through the "value", invalidating the attribute value's blocks. + * Note that args->rmtblkcnt is the minimum number of data blocks we'll + * see for a CRC enabled remote attribute. Each extent will have a + * header, and so we may have more blocks than we realise here. If we + * fail to map the blocks correctly, we'll have problems with the buffer + * lookups. */ lblkno = args->rmtblkno; - valuelen = args->rmtblkcnt; + valuelen = args->valuelen; + blkcnt = xfs_attr3_rmt_blocks(mp, valuelen); while (valuelen > 0) { + int dblkcnt; + /* * Try to remember where we decided to put the value. */ nmap = 1; error = xfs_bmapi_read(args->dp, (xfs_fileoff_t)lblkno, - args->rmtblkcnt, &map, &nmap, - XFS_BMAPI_ATTRFORK); + blkcnt, &map, &nmap, XFS_BMAPI_ATTRFORK); if (error) return(error); ASSERT(nmap == 1); @@ -488,28 +494,31 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args) (map.br_startblock != HOLESTARTBLOCK)); dblkno = XFS_FSB_TO_DADDR(mp, map.br_startblock), - blkcnt = XFS_FSB_TO_BB(mp, map.br_blockcount); + dblkcnt = XFS_FSB_TO_BB(mp, map.br_blockcount); /* * If the "remote" value is in the cache, remove it. */ - bp = xfs_incore(mp->m_ddev_targp, dblkno, blkcnt, XBF_TRYLOCK); + bp = xfs_incore(mp->m_ddev_targp, dblkno, dblkcnt, XBF_TRYLOCK); if (bp) { xfs_buf_stale(bp); xfs_buf_relse(bp); bp = NULL; } - valuelen -= map.br_blockcount; + valuelen -= XFS_ATTR3_RMT_BUF_SPACE(mp, + XFS_FSB_TO_B(mp, map.br_blockcount)); lblkno += map.br_blockcount; + blkcnt -= map.br_blockcount; + blkcnt = max(blkcnt, xfs_attr3_rmt_blocks(mp, valuelen)); } /* * Keep de-allocating extents until the remote-value region is gone. */ + blkcnt = lblkno - args->rmtblkno; lblkno = args->rmtblkno; - blkcnt = args->rmtblkcnt; done = 0; while (!done) { xfs_bmap_init(args->flist, args->firstblock); -- cgit v0.10.2 From 9e80c76205b46b338cb56c336148f54b2326342f Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:05 +1000 Subject: xfs: fully initialise temp leaf in xfs_attr3_leaf_unbalance xfs_attr3_leaf_unbalance() uses a temporary buffer for recombining the entries in two leaves when the destination leaf requires compaction. The temporary buffer ends up being copied back over the original destination buffer, so the header in the temporary buffer needs to contain all the information that is in the destination buffer. To make sure the temporary buffer is fully initialised, once we've set up the temporary incore header appropriately, write is back to the temporary buffer before starting to move entries around. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 8517de2a81da830f5d90da66b4799f4040c76dc9) diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index 0bce1b3..79ece72 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -2181,14 +2181,24 @@ xfs_attr3_leaf_unbalance( struct xfs_attr_leafblock *tmp_leaf; struct xfs_attr3_icleaf_hdr tmphdr; - tmp_leaf = kmem_alloc(state->blocksize, KM_SLEEP); - memset(tmp_leaf, 0, state->blocksize); - memset(&tmphdr, 0, sizeof(tmphdr)); + tmp_leaf = kmem_zalloc(state->blocksize, KM_SLEEP); + + /* + * Copy the header into the temp leaf so that all the stuff + * not in the incore header is present and gets copied back in + * once we've moved all the entries. + */ + memcpy(tmp_leaf, save_leaf, xfs_attr3_leaf_hdr_size(save_leaf)); + memset(&tmphdr, 0, sizeof(tmphdr)); tmphdr.magic = savehdr.magic; tmphdr.forw = savehdr.forw; tmphdr.back = savehdr.back; tmphdr.firstused = state->blocksize; + + /* write the header to the temp buffer to initialise it */ + xfs_attr3_leaf_hdr_to_disk(tmp_leaf, &tmphdr); + if (xfs_attr3_leaf_order(save_blk->bp, &savehdr, drop_blk->bp, &drophdr)) { xfs_attr3_leaf_moveents(drop_leaf, &drophdr, 0, -- cgit v0.10.2 From 634fd5322a3e6ae632dcf5f20eebc0583ba50838 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:06 +1000 Subject: xfs: fully initialise temp leaf in xfs_attr3_leaf_compact xfs_attr3_leaf_compact() uses a temporary buffer for compacting the the entries in a leaf. It copies the the original buffer into the temporary buffer, then zeros the original buffer completely. It then copies the entries back into the original buffer. However, the original buffer has not been correctly initialised, and so the movement of the entries goes horribly wrong. Make sure the zeroed destination buffer is fully initialised, and once we've set up the destination incore header appropriately, write is back to the buffer before starting to move entries around. While debugging this, the _d/_s prefixes weren't sufficient to remind me what buffer was what, so rename then all _src/_dst. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit d4c712bcf26a25c2b67c90e44e0b74c7993b5334) diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index 79ece72..5b03d15 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -1445,11 +1445,12 @@ xfs_attr3_leaf_add_work( STATIC void xfs_attr3_leaf_compact( struct xfs_da_args *args, - struct xfs_attr3_icleaf_hdr *ichdr_d, + struct xfs_attr3_icleaf_hdr *ichdr_dst, struct xfs_buf *bp) { - xfs_attr_leafblock_t *leaf_s, *leaf_d; - struct xfs_attr3_icleaf_hdr ichdr_s; + struct xfs_attr_leafblock *leaf_src; + struct xfs_attr_leafblock *leaf_dst; + struct xfs_attr3_icleaf_hdr ichdr_src; struct xfs_trans *trans = args->trans; struct xfs_mount *mp = trans->t_mountp; char *tmpbuffer; @@ -1457,29 +1458,38 @@ xfs_attr3_leaf_compact( trace_xfs_attr_leaf_compact(args); tmpbuffer = kmem_alloc(XFS_LBSIZE(mp), KM_SLEEP); - ASSERT(tmpbuffer != NULL); memcpy(tmpbuffer, bp->b_addr, XFS_LBSIZE(mp)); memset(bp->b_addr, 0, XFS_LBSIZE(mp)); + leaf_src = (xfs_attr_leafblock_t *)tmpbuffer; + leaf_dst = bp->b_addr; /* - * Copy basic information + * Copy the on-disk header back into the destination buffer to ensure + * all the information in the header that is not part of the incore + * header structure is preserved. */ - leaf_s = (xfs_attr_leafblock_t *)tmpbuffer; - leaf_d = bp->b_addr; - ichdr_s = *ichdr_d; /* struct copy */ - ichdr_d->firstused = XFS_LBSIZE(mp); - ichdr_d->usedbytes = 0; - ichdr_d->count = 0; - ichdr_d->holes = 0; - ichdr_d->freemap[0].base = xfs_attr3_leaf_hdr_size(leaf_s); - ichdr_d->freemap[0].size = ichdr_d->firstused - ichdr_d->freemap[0].base; + memcpy(bp->b_addr, tmpbuffer, xfs_attr3_leaf_hdr_size(leaf_src)); + + /* Initialise the incore headers */ + ichdr_src = *ichdr_dst; /* struct copy */ + ichdr_dst->firstused = XFS_LBSIZE(mp); + ichdr_dst->usedbytes = 0; + ichdr_dst->count = 0; + ichdr_dst->holes = 0; + ichdr_dst->freemap[0].base = xfs_attr3_leaf_hdr_size(leaf_src); + ichdr_dst->freemap[0].size = ichdr_dst->firstused - + ichdr_dst->freemap[0].base; + + + /* write the header back to initialise the underlying buffer */ + xfs_attr3_leaf_hdr_to_disk(leaf_dst, ichdr_dst); /* * Copy all entry's in the same (sorted) order, * but allocate name/value pairs packed and in sequence. */ - xfs_attr3_leaf_moveents(leaf_s, &ichdr_s, 0, leaf_d, ichdr_d, 0, - ichdr_s.count, mp); + xfs_attr3_leaf_moveents(leaf_src, &ichdr_src, 0, leaf_dst, ichdr_dst, 0, + ichdr_src.count, mp); /* * this logs the entire buffer, but the caller must write the header * back to the buffer when it is finished modifying it. -- cgit v0.10.2 From 7bc0dc271e494e12be3afd3c6431e5216347c624 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:08 +1000 Subject: xfs: rework remote attr CRCs Note: this changes the on-disk remote attribute format. I assert that this is OK to do as CRCs are marked experimental and the first kernel it is included in has not yet reached release yet. Further, the userspace utilities are still evolving and so anyone using this stuff right now is a developer or tester using volatile filesystems for testing this feature. Hence changing the format right now to save longer term pain is the right thing to do. The fundamental change is to move from a header per extent in the attribute to a header per filesytem block in the attribute. This means there are more header blocks and the parsing of the attribute data is slightly more complex, but it has the advantage that we always know the size of the attribute on disk based on the length of the data it contains. This is where the header-per-extent method has problems. We don't know the size of the attribute on disk without first knowing how many extents are used to hold it. And we can't tell from a mapping lookup, either, because remote attributes can be allocated contiguously with other attribute blocks and so there is no obvious way of determining the actual size of the atribute on disk short of walking and mapping buffers. The problem with this approach is that if we map a buffer incorrectly (e.g. we make the last buffer for the attribute data too long), we then get buffer cache lookup failure when we map it correctly. i.e. we get a size mismatch on lookup. This is not necessarily fatal, but it's a cache coherency problem that can lead to returning the wrong data to userspace or writing the wrong data to disk. And debug kernels will assert fail if this occurs. I found lots of niggly little problems trying to fix this issue on a 4k block size filesystem, finally getting it to pass with lots of fixes. The thing is, 1024 byte filesystems still failed, and it was getting really complex handling all the corner cases that were showing up. And there were clearly more that I hadn't found yet. It is complex, fragile code, and if we don't fix it now, it will be complex, fragile code forever more. Hence the simple fix is to add a header to each filesystem block. This gives us the same relationship between the attribute data length and the number of blocks on disk as we have without CRCs - it's a linear mapping and doesn't require us to guess anything. It is simple to implement, too - the remote block count calculated at lookup time can be used by the remote attribute set/get/remove code without modification for both CRC and non-CRC filesystems. The world becomes sane again. Because the copy-in and copy-out now need to iterate over each filesystem block, I moved them into helper functions so we separate the block mapping and buffer manupulations from the attribute data and CRC header manipulations. The code becomes much clearer as a result, and it is a lot easier to understand and debug. It also appears to be much more robust - once it worked on 4k block size filesystems, it has worked without failure on 1k block size filesystems, too. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit ad1858d77771172e08016890f0eb2faedec3ecee) diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index 5b03d15..d788302 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -1412,7 +1412,7 @@ xfs_attr3_leaf_add_work( name_rmt->valuelen = 0; name_rmt->valueblk = 0; args->rmtblkno = 1; - args->rmtblkcnt = XFS_B_TO_FSB(mp, args->valuelen); + args->rmtblkcnt = xfs_attr3_rmt_blocks(mp, args->valuelen); } xfs_trans_log_buf(args->trans, bp, XFS_DA_LOGRANGE(leaf, xfs_attr3_leaf_name(leaf, args->index), @@ -2354,8 +2354,9 @@ xfs_attr3_leaf_lookup_int( args->index = probe; args->valuelen = be32_to_cpu(name_rmt->valuelen); args->rmtblkno = be32_to_cpu(name_rmt->valueblk); - args->rmtblkcnt = XFS_B_TO_FSB(args->dp->i_mount, - args->valuelen); + args->rmtblkcnt = xfs_attr3_rmt_blocks( + args->dp->i_mount, + args->valuelen); return XFS_ERROR(EEXIST); } } @@ -2406,7 +2407,8 @@ xfs_attr3_leaf_getvalue( ASSERT(memcmp(args->name, name_rmt->name, args->namelen) == 0); valuelen = be32_to_cpu(name_rmt->valuelen); args->rmtblkno = be32_to_cpu(name_rmt->valueblk); - args->rmtblkcnt = XFS_B_TO_FSB(args->dp->i_mount, valuelen); + args->rmtblkcnt = xfs_attr3_rmt_blocks(args->dp->i_mount, + valuelen); if (args->flags & ATTR_KERNOVAL) { args->valuelen = valuelen; return 0; @@ -2732,7 +2734,8 @@ xfs_attr3_leaf_list_int( args.valuelen = valuelen; args.value = kmem_alloc(valuelen, KM_SLEEP | KM_NOFS); args.rmtblkno = be32_to_cpu(name_rmt->valueblk); - args.rmtblkcnt = XFS_B_TO_FSB(args.dp->i_mount, valuelen); + args.rmtblkcnt = xfs_attr3_rmt_blocks( + args.dp->i_mount, valuelen); retval = xfs_attr_rmtval_get(&args); if (retval) return retval; diff --git a/fs/xfs/xfs_attr_remote.c b/fs/xfs/xfs_attr_remote.c index d8bcb2d..ef6b0c1 100644 --- a/fs/xfs/xfs_attr_remote.c +++ b/fs/xfs/xfs_attr_remote.c @@ -47,7 +47,7 @@ * Each contiguous block has a header, so it is not just a simple attribute * length to FSB conversion. */ -static int +int xfs_attr3_rmt_blocks( struct xfs_mount *mp, int attrlen) @@ -59,12 +59,43 @@ xfs_attr3_rmt_blocks( return XFS_B_TO_FSB(mp, attrlen); } +/* + * Checking of the remote attribute header is split into two parts. The verifier + * does CRC, location and bounds checking, the unpacking function checks the + * attribute parameters and owner. + */ +static bool +xfs_attr3_rmt_hdr_ok( + struct xfs_mount *mp, + void *ptr, + xfs_ino_t ino, + uint32_t offset, + uint32_t size, + xfs_daddr_t bno) +{ + struct xfs_attr3_rmt_hdr *rmt = ptr; + + if (bno != be64_to_cpu(rmt->rm_blkno)) + return false; + if (offset != be32_to_cpu(rmt->rm_offset)) + return false; + if (size != be32_to_cpu(rmt->rm_bytes)) + return false; + if (ino != be64_to_cpu(rmt->rm_owner)) + return false; + + /* ok */ + return true; +} + static bool xfs_attr3_rmt_verify( - struct xfs_buf *bp) + struct xfs_mount *mp, + void *ptr, + int fsbsize, + xfs_daddr_t bno) { - struct xfs_mount *mp = bp->b_target->bt_mount; - struct xfs_attr3_rmt_hdr *rmt = bp->b_addr; + struct xfs_attr3_rmt_hdr *rmt = ptr; if (!xfs_sb_version_hascrc(&mp->m_sb)) return false; @@ -72,7 +103,9 @@ xfs_attr3_rmt_verify( return false; if (!uuid_equal(&rmt->rm_uuid, &mp->m_sb.sb_uuid)) return false; - if (bp->b_bn != be64_to_cpu(rmt->rm_blkno)) + if (be64_to_cpu(rmt->rm_blkno) != bno) + return false; + if (be32_to_cpu(rmt->rm_bytes) > fsbsize - sizeof(*rmt)) return false; if (be32_to_cpu(rmt->rm_offset) + be32_to_cpu(rmt->rm_bytes) >= XATTR_SIZE_MAX) @@ -88,17 +121,40 @@ xfs_attr3_rmt_read_verify( struct xfs_buf *bp) { struct xfs_mount *mp = bp->b_target->bt_mount; + char *ptr; + int len; + bool corrupt = false; + xfs_daddr_t bno; /* no verification of non-crc buffers */ if (!xfs_sb_version_hascrc(&mp->m_sb)) return; - if (!xfs_verify_cksum(bp->b_addr, BBTOB(bp->b_length), - XFS_ATTR3_RMT_CRC_OFF) || - !xfs_attr3_rmt_verify(bp)) { + ptr = bp->b_addr; + bno = bp->b_bn; + len = BBTOB(bp->b_length); + ASSERT(len >= XFS_LBSIZE(mp)); + + while (len > 0) { + if (!xfs_verify_cksum(ptr, XFS_LBSIZE(mp), + XFS_ATTR3_RMT_CRC_OFF)) { + corrupt = true; + break; + } + if (!xfs_attr3_rmt_verify(mp, ptr, XFS_LBSIZE(mp), bno)) { + corrupt = true; + break; + } + len -= XFS_LBSIZE(mp); + ptr += XFS_LBSIZE(mp); + bno += mp->m_bsize; + } + + if (corrupt) { XFS_CORRUPTION_ERROR(__func__, XFS_ERRLEVEL_LOW, mp, bp->b_addr); xfs_buf_ioerror(bp, EFSCORRUPTED); - } + } else + ASSERT(len == 0); } static void @@ -107,23 +163,39 @@ xfs_attr3_rmt_write_verify( { struct xfs_mount *mp = bp->b_target->bt_mount; struct xfs_buf_log_item *bip = bp->b_fspriv; + char *ptr; + int len; + xfs_daddr_t bno; /* no verification of non-crc buffers */ if (!xfs_sb_version_hascrc(&mp->m_sb)) return; - if (!xfs_attr3_rmt_verify(bp)) { - XFS_CORRUPTION_ERROR(__func__, XFS_ERRLEVEL_LOW, mp, bp->b_addr); - xfs_buf_ioerror(bp, EFSCORRUPTED); - return; - } + ptr = bp->b_addr; + bno = bp->b_bn; + len = BBTOB(bp->b_length); + ASSERT(len >= XFS_LBSIZE(mp)); + + while (len > 0) { + if (!xfs_attr3_rmt_verify(mp, ptr, XFS_LBSIZE(mp), bno)) { + XFS_CORRUPTION_ERROR(__func__, + XFS_ERRLEVEL_LOW, mp, bp->b_addr); + xfs_buf_ioerror(bp, EFSCORRUPTED); + return; + } + if (bip) { + struct xfs_attr3_rmt_hdr *rmt; - if (bip) { - struct xfs_attr3_rmt_hdr *rmt = bp->b_addr; - rmt->rm_lsn = cpu_to_be64(bip->bli_item.li_lsn); + rmt = (struct xfs_attr3_rmt_hdr *)ptr; + rmt->rm_lsn = cpu_to_be64(bip->bli_item.li_lsn); + } + xfs_update_cksum(ptr, XFS_LBSIZE(mp), XFS_ATTR3_RMT_CRC_OFF); + + len -= XFS_LBSIZE(mp); + ptr += XFS_LBSIZE(mp); + bno += mp->m_bsize; } - xfs_update_cksum(bp->b_addr, BBTOB(bp->b_length), - XFS_ATTR3_RMT_CRC_OFF); + ASSERT(len == 0); } const struct xfs_buf_ops xfs_attr3_rmt_buf_ops = { @@ -131,15 +203,16 @@ const struct xfs_buf_ops xfs_attr3_rmt_buf_ops = { .verify_write = xfs_attr3_rmt_write_verify, }; -static int +STATIC int xfs_attr3_rmt_hdr_set( struct xfs_mount *mp, + void *ptr, xfs_ino_t ino, uint32_t offset, uint32_t size, - struct xfs_buf *bp) + xfs_daddr_t bno) { - struct xfs_attr3_rmt_hdr *rmt = bp->b_addr; + struct xfs_attr3_rmt_hdr *rmt = ptr; if (!xfs_sb_version_hascrc(&mp->m_sb)) return 0; @@ -149,36 +222,107 @@ xfs_attr3_rmt_hdr_set( rmt->rm_bytes = cpu_to_be32(size); uuid_copy(&rmt->rm_uuid, &mp->m_sb.sb_uuid); rmt->rm_owner = cpu_to_be64(ino); - rmt->rm_blkno = cpu_to_be64(bp->b_bn); - bp->b_ops = &xfs_attr3_rmt_buf_ops; + rmt->rm_blkno = cpu_to_be64(bno); return sizeof(struct xfs_attr3_rmt_hdr); } /* - * Checking of the remote attribute header is split into two parts. the verifier - * does CRC, location and bounds checking, the unpacking function checks the - * attribute parameters and owner. + * Helper functions to copy attribute data in and out of the one disk extents */ -static bool -xfs_attr3_rmt_hdr_ok( - struct xfs_mount *mp, - xfs_ino_t ino, - uint32_t offset, - uint32_t size, - struct xfs_buf *bp) +STATIC int +xfs_attr_rmtval_copyout( + struct xfs_mount *mp, + struct xfs_buf *bp, + xfs_ino_t ino, + int *offset, + int *valuelen, + char **dst) { - struct xfs_attr3_rmt_hdr *rmt = bp->b_addr; + char *src = bp->b_addr; + xfs_daddr_t bno = bp->b_bn; + int len = BBTOB(bp->b_length); - if (offset != be32_to_cpu(rmt->rm_offset)) - return false; - if (size != be32_to_cpu(rmt->rm_bytes)) - return false; - if (ino != be64_to_cpu(rmt->rm_owner)) - return false; + ASSERT(len >= XFS_LBSIZE(mp)); - /* ok */ - return true; + while (len > 0 && *valuelen > 0) { + int hdr_size = 0; + int byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, XFS_LBSIZE(mp)); + + byte_cnt = min_t(int, *valuelen, byte_cnt); + + if (xfs_sb_version_hascrc(&mp->m_sb)) { + if (!xfs_attr3_rmt_hdr_ok(mp, src, ino, *offset, + byte_cnt, bno)) { + xfs_alert(mp, +"remote attribute header mismatch bno/off/len/owner (0x%llx/0x%x/Ox%x/0x%llx)", + bno, *offset, byte_cnt, ino); + return EFSCORRUPTED; + } + hdr_size = sizeof(struct xfs_attr3_rmt_hdr); + } + + memcpy(*dst, src + hdr_size, byte_cnt); + + /* roll buffer forwards */ + len -= XFS_LBSIZE(mp); + src += XFS_LBSIZE(mp); + bno += mp->m_bsize; + + /* roll attribute data forwards */ + *valuelen -= byte_cnt; + *dst += byte_cnt; + *offset += byte_cnt; + } + return 0; +} + +STATIC void +xfs_attr_rmtval_copyin( + struct xfs_mount *mp, + struct xfs_buf *bp, + xfs_ino_t ino, + int *offset, + int *valuelen, + char **src) +{ + char *dst = bp->b_addr; + xfs_daddr_t bno = bp->b_bn; + int len = BBTOB(bp->b_length); + + ASSERT(len >= XFS_LBSIZE(mp)); + + while (len > 0 && *valuelen > 0) { + int hdr_size; + int byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, XFS_LBSIZE(mp)); + + byte_cnt = min(*valuelen, byte_cnt); + hdr_size = xfs_attr3_rmt_hdr_set(mp, dst, ino, *offset, + byte_cnt, bno); + + memcpy(dst + hdr_size, *src, byte_cnt); + + /* + * If this is the last block, zero the remainder of it. + * Check that we are actually the last block, too. + */ + if (byte_cnt + hdr_size < XFS_LBSIZE(mp)) { + ASSERT(*valuelen - byte_cnt == 0); + ASSERT(len == XFS_LBSIZE(mp)); + memset(dst + hdr_size + byte_cnt, 0, + XFS_LBSIZE(mp) - hdr_size - byte_cnt); + } + + /* roll buffer forwards */ + len -= XFS_LBSIZE(mp); + dst += XFS_LBSIZE(mp); + bno += mp->m_bsize; + + /* roll attribute data forwards */ + *valuelen -= byte_cnt; + *src += byte_cnt; + *offset += byte_cnt; + } } /* @@ -192,13 +336,12 @@ xfs_attr_rmtval_get( struct xfs_bmbt_irec map[ATTR_RMTVALUE_MAPSIZE]; struct xfs_mount *mp = args->dp->i_mount; struct xfs_buf *bp; - xfs_daddr_t dblkno; xfs_dablk_t lblkno = args->rmtblkno; - void *dst = args->value; + char *dst = args->value; int valuelen = args->valuelen; int nmap; int error; - int blkcnt; + int blkcnt = args->rmtblkcnt; int i; int offset = 0; @@ -208,7 +351,6 @@ xfs_attr_rmtval_get( while (valuelen > 0) { nmap = ATTR_RMTVALUE_MAPSIZE; - blkcnt = xfs_attr3_rmt_blocks(mp, valuelen); error = xfs_bmapi_read(args->dp, (xfs_fileoff_t)lblkno, blkcnt, map, &nmap, XFS_BMAPI_ATTRFORK); @@ -217,45 +359,29 @@ xfs_attr_rmtval_get( ASSERT(nmap >= 1); for (i = 0; (i < nmap) && (valuelen > 0); i++) { - int byte_cnt; - char *src; + xfs_daddr_t dblkno; + int dblkcnt; ASSERT((map[i].br_startblock != DELAYSTARTBLOCK) && (map[i].br_startblock != HOLESTARTBLOCK)); dblkno = XFS_FSB_TO_DADDR(mp, map[i].br_startblock); - blkcnt = XFS_FSB_TO_BB(mp, map[i].br_blockcount); + dblkcnt = XFS_FSB_TO_BB(mp, map[i].br_blockcount); error = xfs_trans_read_buf(mp, NULL, mp->m_ddev_targp, - dblkno, blkcnt, 0, &bp, + dblkno, dblkcnt, 0, &bp, &xfs_attr3_rmt_buf_ops); if (error) return error; - byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, BBTOB(bp->b_length)); - byte_cnt = min_t(int, valuelen, byte_cnt); - - src = bp->b_addr; - if (xfs_sb_version_hascrc(&mp->m_sb)) { - if (!xfs_attr3_rmt_hdr_ok(mp, args->dp->i_ino, - offset, byte_cnt, bp)) { - xfs_alert(mp, -"remote attribute header does not match required off/len/owner (0x%x/Ox%x,0x%llx)", - offset, byte_cnt, args->dp->i_ino); - xfs_buf_relse(bp); - return EFSCORRUPTED; - - } - - src += sizeof(struct xfs_attr3_rmt_hdr); - } - - memcpy(dst, src, byte_cnt); + error = xfs_attr_rmtval_copyout(mp, bp, args->dp->i_ino, + &offset, &valuelen, + &dst); xfs_buf_relse(bp); + if (error) + return error; - offset += byte_cnt; - dst += byte_cnt; - valuelen -= byte_cnt; - + /* roll attribute extent map forwards */ lblkno += map[i].br_blockcount; + blkcnt -= map[i].br_blockcount; } } ASSERT(valuelen == 0); @@ -273,17 +399,13 @@ xfs_attr_rmtval_set( struct xfs_inode *dp = args->dp; struct xfs_mount *mp = dp->i_mount; struct xfs_bmbt_irec map; - struct xfs_buf *bp; - xfs_daddr_t dblkno; xfs_dablk_t lblkno; xfs_fileoff_t lfileoff = 0; - void *src = args->value; + char *src = args->value; int blkcnt; int valuelen; int nmap; int error; - int hdrcnt = 0; - bool crcs = xfs_sb_version_hascrc(&mp->m_sb); int offset = 0; trace_xfs_attr_rmtval_set(args); @@ -292,21 +414,14 @@ xfs_attr_rmtval_set( * Find a "hole" in the attribute address space large enough for * us to drop the new attribute's value into. Because CRC enable * attributes have headers, we can't just do a straight byte to FSB - * conversion. We calculate the worst case block count in this case - * and we may not need that many, so we have to handle this when - * allocating the blocks below. + * conversion and have to take the header space into account. */ blkcnt = xfs_attr3_rmt_blocks(mp, args->valuelen); - error = xfs_bmap_first_unused(args->trans, args->dp, blkcnt, &lfileoff, XFS_ATTR_FORK); if (error) return error; - /* Start with the attribute data. We'll allocate the rest afterwards. */ - if (crcs) - blkcnt = XFS_B_TO_FSB(mp, args->valuelen); - args->rmtblkno = lblkno = (xfs_dablk_t)lfileoff; args->rmtblkcnt = blkcnt; @@ -349,31 +464,6 @@ xfs_attr_rmtval_set( (map.br_startblock != HOLESTARTBLOCK)); lblkno += map.br_blockcount; blkcnt -= map.br_blockcount; - hdrcnt++; - - /* - * If we have enough blocks for the attribute data, calculate - * how many extra blocks we need for headers. We might run - * through this multiple times in the case that the additional - * headers in the blocks needed for the data fragments spills - * into requiring more blocks. e.g. for 512 byte blocks, we'll - * spill for another block every 9 headers we require in this - * loop. - * - * Note that this can result in contiguous allocation of blocks, - * so we don't use all the space we allocate for headers as we - * have one less header for each contiguous allocation that - * occurs in the map/write loop below. - */ - if (crcs && blkcnt == 0) { - int total_len; - - total_len = args->valuelen + - hdrcnt * sizeof(struct xfs_attr3_rmt_hdr); - blkcnt = XFS_B_TO_FSB(mp, total_len); - blkcnt -= args->rmtblkcnt; - args->rmtblkcnt += blkcnt; - } /* * Start the next trans in the chain. @@ -390,17 +480,15 @@ xfs_attr_rmtval_set( * the INCOMPLETE flag. */ lblkno = args->rmtblkno; - valuelen = args->valuelen; blkcnt = args->rmtblkcnt; + valuelen = args->valuelen; while (valuelen > 0) { - int byte_cnt; - int hdr_size; - int dblkcnt; - char *buf; + struct xfs_buf *bp; + xfs_daddr_t dblkno; + int dblkcnt; + + ASSERT(blkcnt > 0); - /* - * Try to remember where we decided to put the value. - */ xfs_bmap_init(args->flist, args->firstblock); nmap = 1; error = xfs_bmapi_read(dp, (xfs_fileoff_t)lblkno, @@ -419,29 +507,17 @@ xfs_attr_rmtval_set( if (!bp) return ENOMEM; bp->b_ops = &xfs_attr3_rmt_buf_ops; - buf = bp->b_addr; - - byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, BBTOB(bp->b_length)); - byte_cnt = min_t(int, valuelen, byte_cnt); - hdr_size = xfs_attr3_rmt_hdr_set(mp, dp->i_ino, offset, - byte_cnt, bp); - ASSERT(hdr_size + byte_cnt <= BBTOB(bp->b_length)); - memcpy(buf + hdr_size, src, byte_cnt); - - if (byte_cnt + hdr_size < BBTOB(bp->b_length)) - xfs_buf_zero(bp, byte_cnt + hdr_size, - BBTOB(bp->b_length) - byte_cnt - hdr_size); + xfs_attr_rmtval_copyin(mp, bp, args->dp->i_ino, &offset, + &valuelen, &src); error = xfs_bwrite(bp); /* GROT: NOTE: synchronous write */ xfs_buf_relse(bp); if (error) return error; - src += byte_cnt; - valuelen -= byte_cnt; - offset += byte_cnt; + /* roll attribute extent map forwards */ lblkno += map.br_blockcount; blkcnt -= map.br_blockcount; } @@ -454,19 +530,17 @@ xfs_attr_rmtval_set( * out-of-line buffer that it is stored on. */ int -xfs_attr_rmtval_remove(xfs_da_args_t *args) +xfs_attr_rmtval_remove( + struct xfs_da_args *args) { - xfs_mount_t *mp; - xfs_bmbt_irec_t map; - xfs_buf_t *bp; - xfs_daddr_t dblkno; - xfs_dablk_t lblkno; - int valuelen, blkcnt, nmap, error, done, committed; + struct xfs_mount *mp = args->dp->i_mount; + xfs_dablk_t lblkno; + int blkcnt; + int error; + int done; trace_xfs_attr_rmtval_remove(args); - mp = args->dp->i_mount; - /* * Roll through the "value", invalidating the attribute value's blocks. * Note that args->rmtblkcnt is the minimum number of data blocks we'll @@ -476,10 +550,13 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args) * lookups. */ lblkno = args->rmtblkno; - valuelen = args->valuelen; - blkcnt = xfs_attr3_rmt_blocks(mp, valuelen); - while (valuelen > 0) { - int dblkcnt; + blkcnt = args->rmtblkcnt; + while (blkcnt > 0) { + struct xfs_bmbt_irec map; + struct xfs_buf *bp; + xfs_daddr_t dblkno; + int dblkcnt; + int nmap; /* * Try to remember where we decided to put the value. @@ -506,21 +583,19 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args) bp = NULL; } - valuelen -= XFS_ATTR3_RMT_BUF_SPACE(mp, - XFS_FSB_TO_B(mp, map.br_blockcount)); - lblkno += map.br_blockcount; blkcnt -= map.br_blockcount; - blkcnt = max(blkcnt, xfs_attr3_rmt_blocks(mp, valuelen)); } /* * Keep de-allocating extents until the remote-value region is gone. */ - blkcnt = lblkno - args->rmtblkno; lblkno = args->rmtblkno; + blkcnt = args->rmtblkcnt; done = 0; while (!done) { + int committed; + xfs_bmap_init(args->flist, args->firstblock); error = xfs_bunmapi(args->trans, args->dp, lblkno, blkcnt, XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA, diff --git a/fs/xfs/xfs_attr_remote.h b/fs/xfs/xfs_attr_remote.h index c7cca60..92a8fd7 100644 --- a/fs/xfs/xfs_attr_remote.h +++ b/fs/xfs/xfs_attr_remote.h @@ -20,6 +20,14 @@ #define XFS_ATTR3_RMT_MAGIC 0x5841524d /* XARM */ +/* + * There is one of these headers per filesystem block in a remote attribute. + * This is done to ensure there is a 1:1 mapping between the attribute value + * length and the number of blocks needed to store the attribute. This makes the + * verification of a buffer a little more complex, but greatly simplifies the + * allocation, reading and writing of these attributes as we don't have to guess + * the number of blocks needed to store the attribute data. + */ struct xfs_attr3_rmt_hdr { __be32 rm_magic; __be32 rm_offset; @@ -39,6 +47,8 @@ struct xfs_attr3_rmt_hdr { extern const struct xfs_buf_ops xfs_attr3_rmt_buf_ops; +int xfs_attr3_rmt_blocks(struct xfs_mount *mp, int attrlen); + int xfs_attr_rmtval_get(struct xfs_da_args *args); int xfs_attr_rmtval_set(struct xfs_da_args *args); int xfs_attr_rmtval_remove(struct xfs_da_args *args); diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c index 0d25542..1b2472a 100644 --- a/fs/xfs/xfs_buf.c +++ b/fs/xfs/xfs_buf.c @@ -513,6 +513,7 @@ _xfs_buf_find( xfs_alert(btp->bt_mount, "%s: Block out of range: block 0x%llx, EOFS 0x%llx ", __func__, blkno, eofs); + WARN_ON(1); return NULL; } -- cgit v0.10.2 From 2baad6121e2b2fa3428ee6cb2298107be11ab23a Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 29 May 2013 13:43:54 +0100 Subject: x86, crc32-pclmul: Fix build with older binutils binutils prior to 2.18 (e.g. the ones found on SLE10) don't support assembling PEXTRD, so a macro based approach like the one for PCLMULQDQ in the same file should be used. This requires making the helper macros capable of recognizing 32-bit general purpose register operands. [ hpa: tagging for stable as it is a low risk build fix ] Signed-off-by: Jan Beulich Link: http://lkml.kernel.org/r/51A6142A02000078000D99D8@nat28.tlf.novell.com Cc: Alexander Boyko Cc: Herbert Xu Cc: Huang Ying Cc: v3.9 Signed-off-by: H. Peter Anvin diff --git a/arch/x86/crypto/crc32-pclmul_asm.S b/arch/x86/crypto/crc32-pclmul_asm.S index 94c27df..f247304 100644 --- a/arch/x86/crypto/crc32-pclmul_asm.S +++ b/arch/x86/crypto/crc32-pclmul_asm.S @@ -240,7 +240,7 @@ fold_64: pand %xmm3, %xmm1 PCLMULQDQ 0x00, CONSTANT, %xmm1 pxor %xmm2, %xmm1 - pextrd $0x01, %xmm1, %eax + PEXTRD 0x01, %xmm1, %eax ret ENDPROC(crc32_pclmul_le_16) diff --git a/arch/x86/include/asm/inst.h b/arch/x86/include/asm/inst.h index 280bf7f..3e11527 100644 --- a/arch/x86/include/asm/inst.h +++ b/arch/x86/include/asm/inst.h @@ -9,12 +9,68 @@ #define REG_NUM_INVALID 100 -#define REG_TYPE_R64 0 -#define REG_TYPE_XMM 1 +#define REG_TYPE_R32 0 +#define REG_TYPE_R64 1 +#define REG_TYPE_XMM 2 #define REG_TYPE_INVALID 100 + .macro R32_NUM opd r32 + \opd = REG_NUM_INVALID + .ifc \r32,%eax + \opd = 0 + .endif + .ifc \r32,%ecx + \opd = 1 + .endif + .ifc \r32,%edx + \opd = 2 + .endif + .ifc \r32,%ebx + \opd = 3 + .endif + .ifc \r32,%esp + \opd = 4 + .endif + .ifc \r32,%ebp + \opd = 5 + .endif + .ifc \r32,%esi + \opd = 6 + .endif + .ifc \r32,%edi + \opd = 7 + .endif +#ifdef CONFIG_X86_64 + .ifc \r32,%r8d + \opd = 8 + .endif + .ifc \r32,%r9d + \opd = 9 + .endif + .ifc \r32,%r10d + \opd = 10 + .endif + .ifc \r32,%r11d + \opd = 11 + .endif + .ifc \r32,%r12d + \opd = 12 + .endif + .ifc \r32,%r13d + \opd = 13 + .endif + .ifc \r32,%r14d + \opd = 14 + .endif + .ifc \r32,%r15d + \opd = 15 + .endif +#endif + .endm + .macro R64_NUM opd r64 \opd = REG_NUM_INVALID +#ifdef CONFIG_X86_64 .ifc \r64,%rax \opd = 0 .endif @@ -63,6 +119,7 @@ .ifc \r64,%r15 \opd = 15 .endif +#endif .endm .macro XMM_NUM opd xmm @@ -118,10 +175,13 @@ .endm .macro REG_TYPE type reg + R32_NUM reg_type_r32 \reg R64_NUM reg_type_r64 \reg XMM_NUM reg_type_xmm \reg .if reg_type_r64 <> REG_NUM_INVALID \type = REG_TYPE_R64 + .elseif reg_type_r32 <> REG_NUM_INVALID + \type = REG_TYPE_R32 .elseif reg_type_xmm <> REG_NUM_INVALID \type = REG_TYPE_XMM .else @@ -162,6 +222,16 @@ .byte \imm8 .endm + .macro PEXTRD imm8 xmm gpr + R32_NUM extrd_opd1 \gpr + XMM_NUM extrd_opd2 \xmm + PFX_OPD_SIZE + PFX_REX extrd_opd1 extrd_opd2 + .byte 0x0f, 0x3a, 0x16 + MODRM 0xc0 extrd_opd1 extrd_opd2 + .byte \imm8 + .endm + .macro AESKEYGENASSIST rcon xmm1 xmm2 XMM_NUM aeskeygen_opd1 \xmm1 XMM_NUM aeskeygen_opd2 \xmm2 -- cgit v0.10.2 From 5187b28ff08249ab8a162e802209ed04e271ca02 Mon Sep 17 00:00:00 2001 From: Pekka Riikonen Date: Mon, 13 May 2013 14:32:07 +0200 Subject: x86: Allow FPU to be used at interrupt time even with eagerfpu With the addition of eagerfpu the irq_fpu_usable() now returns false negatives especially in the case of ksoftirqd and interrupted idle task, two common cases for FPU use for example in networking/crypto. With eagerfpu=off FPU use is possible in those contexts. This is because of the eagerfpu check in interrupted_kernel_fpu_idle(): ... * For now, with eagerfpu we will return interrupted kernel FPU * state as not-idle. TBD: Ideally we can change the return value * to something like __thread_has_fpu(current). But we need to * be careful of doing __thread_clear_has_fpu() before saving * the FPU etc for supporting nested uses etc. For now, take * the simple route! ... if (use_eager_fpu()) return 0; As eagerfpu is automatically "on" on those CPUs that also have the features like AES-NI this patch changes the eagerfpu check to return 1 in case the kernel_fpu_begin() has not been said yet. Once it has been the __thread_has_fpu() will start returning 0. Notice that with eagerfpu the __thread_has_fpu is always true initially. FPU use is thus always possible no matter what task is under us, unless the state has already been saved with kernel_fpu_begin(). [ hpa: this is a performance regression, not a correctness regression, but since it can be quite serious on CPUs which need encryption at interrupt time I am marking this for urgent/stable. ] Signed-off-by: Pekka Riikonen Link: http://lkml.kernel.org/r/alpine.GSO.2.00.1305131356320.18@git.silcnet.org Cc: v3.7+ Signed-off-by: H. Peter Anvin diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c index 245a71d..cb33909 100644 --- a/arch/x86/kernel/i387.c +++ b/arch/x86/kernel/i387.c @@ -22,23 +22,19 @@ /* * Were we in an interrupt that interrupted kernel mode? * - * For now, with eagerfpu we will return interrupted kernel FPU - * state as not-idle. TBD: Ideally we can change the return value - * to something like __thread_has_fpu(current). But we need to - * be careful of doing __thread_clear_has_fpu() before saving - * the FPU etc for supporting nested uses etc. For now, take - * the simple route! - * * On others, we can do a kernel_fpu_begin/end() pair *ONLY* if that * pair does nothing at all: the thread must not have fpu (so * that we don't try to save the FPU state), and TS must * be set (so that the clts/stts pair does nothing that is * visible in the interrupted kernel thread). + * + * Except for the eagerfpu case when we return 1 unless we've already + * been eager and saved the state in kernel_fpu_begin(). */ static inline bool interrupted_kernel_fpu_idle(void) { if (use_eager_fpu()) - return 0; + return __thread_has_fpu(current); return !__thread_has_fpu(current) && (read_cr0() & X86_CR0_TS); @@ -78,8 +74,8 @@ void __kernel_fpu_begin(void) struct task_struct *me = current; if (__thread_has_fpu(me)) { - __save_init_fpu(me); __thread_clear_has_fpu(me); + __save_init_fpu(me); /* We do 'stts()' in __kernel_fpu_end() */ } else if (!use_eager_fpu()) { this_cpu_write(fpu_owner_task, NULL); -- cgit v0.10.2 From e38b170695d4108eeb6cd84db36f567fc6de4120 Mon Sep 17 00:00:00 2001 From: Somnath Kotur Date: Wed, 29 May 2013 22:55:56 +0000 Subject: be2net: Mark checksum fail for IP fragmented packets HW does not compute L4 checksum for IP Fragmented packets. Signed-off-by: Kalesh AP Signed-off-by: Somnath Kotur Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h index f544b29..0a51068 100644 --- a/drivers/net/ethernet/emulex/benet/be.h +++ b/drivers/net/ethernet/emulex/benet/be.h @@ -262,6 +262,7 @@ struct be_rx_compl_info { u8 ipv6; u8 vtm; u8 pkt_type; + u8 ip_frag; }; struct be_rx_obj { diff --git a/drivers/net/ethernet/emulex/benet/be_hw.h b/drivers/net/ethernet/emulex/benet/be_hw.h index 3c1099b..8780183 100644 --- a/drivers/net/ethernet/emulex/benet/be_hw.h +++ b/drivers/net/ethernet/emulex/benet/be_hw.h @@ -356,7 +356,7 @@ struct amap_eth_rx_compl_v0 { u8 ip_version; /* dword 1 */ u8 macdst[6]; /* dword 1 */ u8 vtp; /* dword 1 */ - u8 rsvd0; /* dword 1 */ + u8 ip_frag; /* dword 1 */ u8 fragndx[10]; /* dword 1 */ u8 ct[2]; /* dword 1 */ u8 sw; /* dword 1 */ diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index ca2967b..32a6927 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -1599,6 +1599,8 @@ static void be_parse_rx_compl_v0(struct be_eth_rx_compl *compl, compl); } rxcp->port = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, port, compl); + rxcp->ip_frag = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, + ip_frag, compl); } static struct be_rx_compl_info *be_rx_compl_get(struct be_rx_obj *rxo) @@ -1620,6 +1622,9 @@ static struct be_rx_compl_info *be_rx_compl_get(struct be_rx_obj *rxo) else be_parse_rx_compl_v0(compl, rxcp); + if (rxcp->ip_frag) + rxcp->l4_csum = 0; + if (rxcp->vlanf) { /* vlanf could be wrongly set in some cards. * ignore if vtm is not set */ @@ -2168,7 +2173,7 @@ static irqreturn_t be_msix(int irq, void *dev) static inline bool do_gro(struct be_rx_compl_info *rxcp) { - return (rxcp->tcpf && !rxcp->err) ? true : false; + return (rxcp->tcpf && !rxcp->err && rxcp->l4_csum) ? true : false; } static int be_process_rx(struct be_rx_obj *rxo, struct napi_struct *napi, -- cgit v0.10.2 From 01e5b2c4559d084f4eaf0d160d84cc185db141ba Mon Sep 17 00:00:00 2001 From: Somnath Kotur Date: Wed, 29 May 2013 22:56:17 +0000 Subject: be2net: Fix crash on 2nd invocation of PCI AER/EEH error_detected hook During a PCI EEH/AER error recovery flow, if the device did not successfully restart, the error_detected() hook may be called a second time with a "perm_failure" state. This patch skips over driver cleanup for the second invocation of the callback. Also, Lancer error recovery code is fixed-up to handle these changes. Signed-off-by: Kalesh AP Signed-off-by: Somnath kotur Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index a236ecd..1db2df6 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -562,7 +562,7 @@ int lancer_test_and_set_rdy_state(struct be_adapter *adapter) resource_error = lancer_provisioning_error(adapter); if (resource_error) - return -1; + return -EAGAIN; status = lancer_wait_ready(adapter); if (!status) { @@ -590,8 +590,8 @@ int lancer_test_and_set_rdy_state(struct be_adapter *adapter) * when PF provisions resources. */ resource_error = lancer_provisioning_error(adapter); - if (status == -1 && !resource_error) - adapter->eeh_error = true; + if (resource_error) + status = -EAGAIN; return status; } diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 32a6927..8bc1b21 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -4098,6 +4098,7 @@ static int be_get_initial_config(struct be_adapter *adapter) static int lancer_recover_func(struct be_adapter *adapter) { + struct device *dev = &adapter->pdev->dev; int status; status = lancer_test_and_set_rdy_state(adapter); @@ -4109,8 +4110,7 @@ static int lancer_recover_func(struct be_adapter *adapter) be_clear(adapter); - adapter->hw_error = false; - adapter->fw_timeout = false; + be_clear_all_error(adapter); status = be_setup(adapter); if (status) @@ -4122,13 +4122,13 @@ static int lancer_recover_func(struct be_adapter *adapter) goto err; } - dev_err(&adapter->pdev->dev, - "Adapter SLIPORT recovery succeeded\n"); + dev_err(dev, "Error recovery successful\n"); return 0; err: - if (adapter->eeh_error) - dev_err(&adapter->pdev->dev, - "Adapter SLIPORT recovery failed\n"); + if (status == -EAGAIN) + dev_err(dev, "Waiting for resource provisioning\n"); + else + dev_err(dev, "Error recovery failed\n"); return status; } @@ -4137,28 +4137,27 @@ static void be_func_recovery_task(struct work_struct *work) { struct be_adapter *adapter = container_of(work, struct be_adapter, func_recovery_work.work); - int status; + int status = 0; be_detect_error(adapter); if (adapter->hw_error && lancer_chip(adapter)) { - if (adapter->eeh_error) - goto out; - rtnl_lock(); netif_device_detach(adapter->netdev); rtnl_unlock(); status = lancer_recover_func(adapter); - if (!status) netif_device_attach(adapter->netdev); } -out: - schedule_delayed_work(&adapter->func_recovery_work, - msecs_to_jiffies(1000)); + /* In Lancer, for all errors other than provisioning error (-EAGAIN), + * no need to attempt further recovery. + */ + if (!status || status == -EAGAIN) + schedule_delayed_work(&adapter->func_recovery_work, + msecs_to_jiffies(1000)); } static void be_worker(struct work_struct *work) @@ -4441,20 +4440,19 @@ static pci_ers_result_t be_eeh_err_detected(struct pci_dev *pdev, dev_err(&adapter->pdev->dev, "EEH error detected\n"); - adapter->eeh_error = true; - - cancel_delayed_work_sync(&adapter->func_recovery_work); + if (!adapter->eeh_error) { + adapter->eeh_error = true; - rtnl_lock(); - netif_device_detach(netdev); - rtnl_unlock(); + cancel_delayed_work_sync(&adapter->func_recovery_work); - if (netif_running(netdev)) { rtnl_lock(); - be_close(netdev); + netif_device_detach(netdev); + if (netif_running(netdev)) + be_close(netdev); rtnl_unlock(); + + be_clear(adapter); } - be_clear(adapter); if (state == pci_channel_io_perm_failure) return PCI_ERS_RESULT_DISCONNECT; @@ -4479,7 +4477,6 @@ static pci_ers_result_t be_eeh_reset(struct pci_dev *pdev) int status; dev_info(&adapter->pdev->dev, "EEH reset\n"); - be_clear_all_error(adapter); status = pci_enable_device(pdev); if (status) @@ -4497,6 +4494,7 @@ static pci_ers_result_t be_eeh_reset(struct pci_dev *pdev) return PCI_ERS_RESULT_DISCONNECT; pci_cleanup_aer_uncorrect_error_status(pdev); + be_clear_all_error(adapter); return PCI_ERS_RESULT_RECOVERED; } -- cgit v0.10.2 From 21363ca873334391992f2f424856aa864345bb61 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 29 May 2013 21:35:23 -0700 Subject: target/file: Fix off-by-one READ_CAPACITY bug for !S_ISBLK export This patch fixes a bug where FILEIO was incorrectly reporting the number of logical blocks (+ 1) when using non struct block_device export mode. It changes fd_get_blocks() to follow all other backend ->get_blocks() cases, and reduces the calculated dev_size by one dev->dev_attrib.block_size number of bytes, and also fixes initial fd_block_size assignment at fd_configure_device() time introduced in commit 0fd97ccf4. Reported-by: Wenchao Xia Reported-by: Badari Pulavarty Tested-by: Badari Pulavarty Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_file.c b/drivers/target/target_core_file.c index 1b1d544..b11890d 100644 --- a/drivers/target/target_core_file.c +++ b/drivers/target/target_core_file.c @@ -153,6 +153,7 @@ static int fd_configure_device(struct se_device *dev) struct request_queue *q = bdev_get_queue(inode->i_bdev); unsigned long long dev_size; + fd_dev->fd_block_size = bdev_logical_block_size(inode->i_bdev); /* * Determine the number of bytes from i_size_read() minus * one (1) logical sector from underlying struct block_device @@ -199,6 +200,7 @@ static int fd_configure_device(struct se_device *dev) goto fail; } + fd_dev->fd_block_size = FD_BLOCKSIZE; /* * Limit UNMAP emulation to 8k Number of LBAs (NoLB) */ @@ -217,9 +219,7 @@ static int fd_configure_device(struct se_device *dev) dev->dev_attrib.max_write_same_len = 0x1000; } - fd_dev->fd_block_size = dev->dev_attrib.hw_block_size; - - dev->dev_attrib.hw_block_size = FD_BLOCKSIZE; + dev->dev_attrib.hw_block_size = fd_dev->fd_block_size; dev->dev_attrib.hw_max_sectors = FD_MAX_SECTORS; dev->dev_attrib.hw_queue_depth = FD_MAX_DEVICE_QUEUE_DEPTH; @@ -694,11 +694,12 @@ static sector_t fd_get_blocks(struct se_device *dev) * to handle underlying block_device resize operations. */ if (S_ISBLK(i->i_mode)) - dev_size = (i_size_read(i) - fd_dev->fd_block_size); + dev_size = i_size_read(i); else dev_size = fd_dev->fd_dev_size; - return div_u64(dev_size, dev->dev_attrib.block_size); + return div_u64(dev_size - dev->dev_attrib.block_size, + dev->dev_attrib.block_size); } static struct sbc_ops fd_sbc_ops = { -- cgit v0.10.2 From cea4dcfdad926a27a18e188720efe0f2c9403456 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Thu, 23 May 2013 10:32:17 -0700 Subject: iscsi-target: fix heap buffer overflow on error If a key was larger than 64 bytes, as checked by iscsi_check_key(), the error response packet, generated by iscsi_add_notunderstood_response(), would still attempt to copy the entire key into the packet, overflowing the structure on the heap. Remote preauthentication kernel memory corruption was possible if a target was configured and listening on the network. CVE-2013-2850 Signed-off-by: Kees Cook Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/iscsi/iscsi_target_parameters.c b/drivers/target/iscsi/iscsi_target_parameters.c index c2185fc..e382221 100644 --- a/drivers/target/iscsi/iscsi_target_parameters.c +++ b/drivers/target/iscsi/iscsi_target_parameters.c @@ -758,9 +758,9 @@ static int iscsi_add_notunderstood_response( } INIT_LIST_HEAD(&extra_response->er_list); - strncpy(extra_response->key, key, strlen(key) + 1); - strncpy(extra_response->value, NOTUNDERSTOOD, - strlen(NOTUNDERSTOOD) + 1); + strlcpy(extra_response->key, key, sizeof(extra_response->key)); + strlcpy(extra_response->value, NOTUNDERSTOOD, + sizeof(extra_response->value)); list_add_tail(&extra_response->er_list, ¶m_list->extra_response_list); @@ -1629,8 +1629,6 @@ int iscsi_decode_text_input( if (phase & PHASE_SECURITY) { if (iscsi_check_for_auth_key(key) > 0) { - char *tmpptr = key + strlen(key); - *tmpptr = '='; kfree(tmpbuf); return 1; } diff --git a/drivers/target/iscsi/iscsi_target_parameters.h b/drivers/target/iscsi/iscsi_target_parameters.h index 915b067..a47046a 100644 --- a/drivers/target/iscsi/iscsi_target_parameters.h +++ b/drivers/target/iscsi/iscsi_target_parameters.h @@ -1,8 +1,10 @@ #ifndef ISCSI_PARAMETERS_H #define ISCSI_PARAMETERS_H +#include + struct iscsi_extra_response { - char key[64]; + char key[KEY_MAXLEN]; char value[32]; struct list_head er_list; } ____cacheline_aligned; -- cgit v0.10.2 From d68c380590c390a488fe214e5ebf9439216ac3ba Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 27 May 2013 12:28:25 -0300 Subject: clk: mxs: Include clk mxs header file Fix the following sparse warnings: drivers/clk/mxs/clk-imx28.c:72:5: warning: symbol 'mxs_saif_clkmux_select' was not declared. Should it be static? drivers/clk/mxs/clk-imx28.c:156:12: warning: symbol 'mx28_clocks_init' was not declared. Should it be static? Signed-off-by: Fabio Estevam Acked-by: Shawn Guo Signed-off-by: Mike Turquette [mturquette@linaro.org: fixed $SUBJECT line] diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c index d0e5eed..4faf0af 100644 --- a/drivers/clk/mxs/clk-imx28.c +++ b/drivers/clk/mxs/clk-imx28.c @@ -10,6 +10,7 @@ */ #include +#include #include #include #include -- cgit v0.10.2 From 970fa986fadb1165cf38b45b70e98302a3bee497 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 31 May 2013 12:45:09 +1000 Subject: drm/qxl: fix build warnings on 32-bit Just the usual printk related warnings. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/qxl/qxl_ioctl.c b/drivers/gpu/drm/qxl/qxl_ioctl.c index 6db7370..a4b71b2 100644 --- a/drivers/gpu/drm/qxl/qxl_ioctl.c +++ b/drivers/gpu/drm/qxl/qxl_ioctl.c @@ -151,7 +151,7 @@ static int qxl_execbuffer_ioctl(struct drm_device *dev, void *data, struct qxl_bo *cmd_bo; int release_type; struct drm_qxl_command *commands = - (struct drm_qxl_command *)execbuffer->commands; + (struct drm_qxl_command *)(uintptr_t)execbuffer->commands; if (DRM_COPY_FROM_USER(&user_cmd, &commands[cmd_num], sizeof(user_cmd))) @@ -193,7 +193,7 @@ static int qxl_execbuffer_ioctl(struct drm_device *dev, void *data, for (i = 0 ; i < user_cmd.relocs_num; ++i) { if (DRM_COPY_FROM_USER(&reloc, - &((struct drm_qxl_reloc *)user_cmd.relocs)[i], + &((struct drm_qxl_reloc *)(uintptr_t)user_cmd.relocs)[i], sizeof(reloc))) { qxl_bo_list_unreserve(&reloc_list, true); qxl_release_unreserve(qdev, release); diff --git a/drivers/gpu/drm/qxl/qxl_kms.c b/drivers/gpu/drm/qxl/qxl_kms.c index 85127ed..e27ce2a 100644 --- a/drivers/gpu/drm/qxl/qxl_kms.c +++ b/drivers/gpu/drm/qxl/qxl_kms.c @@ -128,12 +128,13 @@ int qxl_device_init(struct qxl_device *qdev, qdev->vram_mapping = io_mapping_create_wc(qdev->vram_base, pci_resource_len(pdev, 0)); qdev->surface_mapping = io_mapping_create_wc(qdev->surfaceram_base, qdev->surfaceram_size); - DRM_DEBUG_KMS("qxl: vram %p-%p(%dM %dk), surface %p-%p(%dM %dk)\n", - (void *)qdev->vram_base, (void *)pci_resource_end(pdev, 0), + DRM_DEBUG_KMS("qxl: vram %llx-%llx(%dM %dk), surface %llx-%llx(%dM %dk)\n", + (unsigned long long)qdev->vram_base, + (unsigned long long)pci_resource_end(pdev, 0), (int)pci_resource_len(pdev, 0) / 1024 / 1024, (int)pci_resource_len(pdev, 0) / 1024, - (void *)qdev->surfaceram_base, - (void *)pci_resource_end(pdev, 1), + (unsigned long long)qdev->surfaceram_base, + (unsigned long long)pci_resource_end(pdev, 1), (int)qdev->surfaceram_size / 1024 / 1024, (int)qdev->surfaceram_size / 1024); -- cgit v0.10.2 From 8b1dacb6ae15c94d50642a474e5af8981555253b Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 30 May 2013 19:55:34 +0800 Subject: ALSA: sis7019: fix error return code in sis_chip_create() Fix to return a negative error code in the pci_set_dma_mask() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: Takashi Iwai diff --git a/sound/pci/sis7019.c b/sound/pci/sis7019.c index d59abe1..748e82d 100644 --- a/sound/pci/sis7019.c +++ b/sound/pci/sis7019.c @@ -1341,7 +1341,8 @@ static int sis_chip_create(struct snd_card *card, if (rc) goto error_out; - if (pci_set_dma_mask(pci, DMA_BIT_MASK(30)) < 0) { + rc = pci_set_dma_mask(pci, DMA_BIT_MASK(30)); + if (rc < 0) { dev_err(&pci->dev, "architecture does not support 30-bit PCI busmaster DMA"); goto error_out_enabled; } -- cgit v0.10.2 From 6b4dc2bd7e706570167e086a41b87ea250a55b34 Mon Sep 17 00:00:00 2001 From: Ebben Aries Date: Wed, 29 May 2013 22:27:18 -0600 Subject: ALSA: hda - add dock support for Thinkpad T431s Add a model/fixup string "lenovo-dock", for Thinkpad T431s, to allow sound in docking station. Tested on Lenovo T431s with ThinkPad Mini Dock Plus Series 3 Signed-off-by: Ebben Aries Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 59d2e91..9658faf 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3530,6 +3530,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x21fa, "Thinkpad X230", ALC269_FIXUP_LENOVO_DOCK), SND_PCI_QUIRK(0x17aa, 0x21f3, "Thinkpad T430", ALC269_FIXUP_LENOVO_DOCK), SND_PCI_QUIRK(0x17aa, 0x21fb, "Thinkpad T430s", ALC269_FIXUP_LENOVO_DOCK), + SND_PCI_QUIRK(0x17aa, 0x2208, "Thinkpad T431s", ALC269_FIXUP_LENOVO_DOCK), SND_PCI_QUIRK(0x17aa, 0x2203, "Thinkpad X230 Tablet", ALC269_FIXUP_LENOVO_DOCK), SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_FIXUP_PCM_44K), SND_PCI_QUIRK(0x17aa, 0x9e54, "LENOVO NB", ALC269_FIXUP_LENOVO_EAPD), -- cgit v0.10.2 From d5ddad4168348337d98d6b8f156a3892de444411 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Fri, 31 May 2013 00:46:11 -0700 Subject: target: Propigate up ->cmd_kref put return via transport_generic_free_cmd Go ahead and propigate up the ->cmd_kref put return value from target_put_sess_cmd() -> transport_release_cmd() -> transport_put_cmd() -> transport_generic_free_cmd(). This is useful for certain fabrics when determining the active I/O shutdown case with SCF_ACK_KREF where a final target_put_sess_cmd() is still required by the caller. Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index bbca144..21e3158 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -65,7 +65,7 @@ static void transport_complete_task_attr(struct se_cmd *cmd); static void transport_handle_queue_full(struct se_cmd *cmd, struct se_device *dev); static int transport_generic_get_mem(struct se_cmd *cmd); -static void transport_put_cmd(struct se_cmd *cmd); +static int transport_put_cmd(struct se_cmd *cmd); static void target_complete_ok_work(struct work_struct *work); int init_se_kmem_caches(void) @@ -1944,7 +1944,7 @@ static inline void transport_free_pages(struct se_cmd *cmd) * This routine unconditionally frees a command, and reference counting * or list removal must be done in the caller. */ -static void transport_release_cmd(struct se_cmd *cmd) +static int transport_release_cmd(struct se_cmd *cmd) { BUG_ON(!cmd->se_tfo); @@ -1956,11 +1956,11 @@ static void transport_release_cmd(struct se_cmd *cmd) * If this cmd has been setup with target_get_sess_cmd(), drop * the kref and call ->release_cmd() in kref callback. */ - if (cmd->check_release != 0) { - target_put_sess_cmd(cmd->se_sess, cmd); - return; - } + if (cmd->check_release != 0) + return target_put_sess_cmd(cmd->se_sess, cmd); + cmd->se_tfo->release_cmd(cmd); + return 1; } /** @@ -1969,7 +1969,7 @@ static void transport_release_cmd(struct se_cmd *cmd) * * This routine releases our reference to the command and frees it if possible. */ -static void transport_put_cmd(struct se_cmd *cmd) +static int transport_put_cmd(struct se_cmd *cmd) { unsigned long flags; @@ -1977,7 +1977,7 @@ static void transport_put_cmd(struct se_cmd *cmd) if (atomic_read(&cmd->t_fe_count) && !atomic_dec_and_test(&cmd->t_fe_count)) { spin_unlock_irqrestore(&cmd->t_state_lock, flags); - return; + return 0; } if (cmd->transport_state & CMD_T_DEV_ACTIVE) { @@ -1987,8 +1987,7 @@ static void transport_put_cmd(struct se_cmd *cmd) spin_unlock_irqrestore(&cmd->t_state_lock, flags); transport_free_pages(cmd); - transport_release_cmd(cmd); - return; + return transport_release_cmd(cmd); } void *transport_kmap_data_sg(struct se_cmd *cmd) @@ -2153,13 +2152,15 @@ static void transport_write_pending_qf(struct se_cmd *cmd) } } -void transport_generic_free_cmd(struct se_cmd *cmd, int wait_for_tasks) +int transport_generic_free_cmd(struct se_cmd *cmd, int wait_for_tasks) { + int ret = 0; + if (!(cmd->se_cmd_flags & SCF_SE_LUN_CMD)) { if (wait_for_tasks && (cmd->se_cmd_flags & SCF_SCSI_TMR_CDB)) transport_wait_for_tasks(cmd); - transport_release_cmd(cmd); + ret = transport_release_cmd(cmd); } else { if (wait_for_tasks) transport_wait_for_tasks(cmd); @@ -2167,8 +2168,9 @@ void transport_generic_free_cmd(struct se_cmd *cmd, int wait_for_tasks) if (cmd->se_lun) transport_lun_remove_cmd(cmd); - transport_put_cmd(cmd); + ret = transport_put_cmd(cmd); } + return ret; } EXPORT_SYMBOL(transport_generic_free_cmd); diff --git a/include/target/target_core_fabric.h b/include/target/target_core_fabric.h index 8a26f0d..1dcce9c 100644 --- a/include/target/target_core_fabric.h +++ b/include/target/target_core_fabric.h @@ -114,7 +114,7 @@ sense_reason_t transport_generic_new_cmd(struct se_cmd *); void target_execute_cmd(struct se_cmd *cmd); -void transport_generic_free_cmd(struct se_cmd *, int); +int transport_generic_free_cmd(struct se_cmd *, int); bool transport_wait_for_tasks(struct se_cmd *); int transport_check_aborted_status(struct se_cmd *, int); -- cgit v0.10.2 From aafc9d158b0039e600fc429246c7bb04a111fb26 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Fri, 31 May 2013 00:49:41 -0700 Subject: iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handling With the introduction of target_get_sess_cmd() referencing counting for ISCSI_OP_SCSI_CMD processing with iser-target, iscsit_free_cmd() usage in traditional iscsi-target driver code now needs to be aware of the active I/O shutdown case when a remaining se_cmd->cmd_kref reference may exist after transport_generic_free_cmd() completes, requiring a final target_put_sess_cmd() to release iscsi_cmd descriptor memory. This patch changes iscsit_free_cmd() to invoke __iscsit_free_cmd() before transport_generic_free_cmd() -> target_put_sess_cmd(), and also avoids aquiring the per-connection queue locks for typical fast-path calls during normal ISTATE_REMOVE operation. Also update iscsit_free_cmd() usage throughout iscsi-target to use the new 'bool shutdown' parameter. This patch fixes a regression bug introduced during v3.10-rc1 in commit 3e1c81a95, that was causing the following WARNING to appear: [ 257.235153] ------------[ cut here]------------ [ 257.240314] WARNING: at kernel/softirq.c:160 local_bh_enable_ip+0x3c/0x86() [ 257.248089] Modules linked in: vhost_scsi ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi loop acpi_cpufreq freq_table mperf kvm_intel kvm crc32c_intel button ehci_pci pcspkr joydev i2c_i801 microcode ext3 jbd raid10 raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx raid1 raid0 linear igb hwmon i2c_algo_bit i2c_core ptp ata_piix libata qla2xxx uhci_hcd ehci_hcd mlx4_core scsi_transport_fc scsi_tgt pps_core [ 257.308748] CPU: 1 PID: 3295 Comm: iscsi_ttx Not tainted 3.10.0-rc2+ #103 [ 257.316329] Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.00.0057.031020111721 03/10/2011 [ 257.327597] ffffffff814c24b7 ffff880458331b58 ffffffff8138eef2 ffff880458331b98 [ 257.335892] ffffffff8102c052 ffff880400000008 0000000000000000 ffff88085bdf0000 [ 257.344191] ffff88085bdf00d8 ffff88085bdf00e0 ffff88085bdf00f8 ffff880458331ba8 [ 257.352488] Call Trace: [ 257.355223] [] dump_stack+0x19/0x1f [ 257.360963] [] warn_slowpath_common+0x62/0x7b [ 257.367669] [] warn_slowpath_null+0x15/0x17 [ 257.374181] [] local_bh_enable_ip+0x3c/0x86 [ 257.380697] [] _raw_spin_unlock_bh+0x10/0x12 [ 257.387311] [] iscsit_free_r2ts_from_list+0x5e/0x67 [iscsi_target_mod] [ 257.396438] [] iscsit_release_cmd+0x20/0x223 [iscsi_target_mod] [ 257.404893] [] lio_release_cmd+0x3a/0x3e [iscsi_target_mod] [ 257.412964] [] target_release_cmd_kref+0x7a/0x7c [target_core_mod] [ 257.421712] [] target_put_sess_cmd+0x5f/0x7f [target_core_mod] [ 257.430071] [] transport_release_cmd+0x59/0x6f [target_core_mod] [ 257.438625] [] transport_put_cmd+0x131/0x140 [target_core_mod] [ 257.446985] [] ? transport_wait_for_tasks+0xfa/0x1d5 [target_core_mod] [ 257.456121] [] transport_generic_free_cmd+0x4e/0x52 [target_core_mod] [ 257.465159] [] ? __migrate_task+0x110/0x110 [ 257.471674] [] iscsit_free_cmd+0x46/0x55 [iscsi_target_mod] [ 257.479741] [] iscsit_immediate_queue+0x301/0x353 [iscsi_target_mod] [ 257.488683] [] iscsi_target_tx_thread+0x1c6/0x2a8 [iscsi_target_mod] [ 257.497623] [] ? wake_up_bit+0x25/0x25 [ 257.503652] [] ? iscsit_ack_from_expstatsn+0xd5/0xd5 [iscsi_target_mod] [ 257.512882] [] kthread+0xb0/0xb8 [ 257.518329] [] ? kthread_freezable_should_stop+0x60/0x60 [ 257.526105] [] ret_from_fork+0x7c/0xb0 [ 257.532133] [] ? kthread_freezable_should_stop+0x60/0x60 [ 257.539906] ---[ end trace 5520397d0f2e0800 ]--- Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 262ef1f..d7705e5 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -651,7 +651,7 @@ static int iscsit_add_reject( cmd->buf_ptr = kmemdup(buf, ISCSI_HDR_LEN, GFP_KERNEL); if (!cmd->buf_ptr) { pr_err("Unable to allocate memory for cmd->buf_ptr\n"); - iscsit_release_cmd(cmd); + iscsit_free_cmd(cmd, false); return -1; } @@ -697,7 +697,7 @@ int iscsit_add_reject_from_cmd( cmd->buf_ptr = kmemdup(buf, ISCSI_HDR_LEN, GFP_KERNEL); if (!cmd->buf_ptr) { pr_err("Unable to allocate memory for cmd->buf_ptr\n"); - iscsit_release_cmd(cmd); + iscsit_free_cmd(cmd, false); return -1; } @@ -1743,7 +1743,7 @@ int iscsit_handle_nop_out(struct iscsi_conn *conn, struct iscsi_cmd *cmd, return 0; out: if (cmd) - iscsit_release_cmd(cmd); + iscsit_free_cmd(cmd, false); ping_out: kfree(ping_data); return ret; @@ -2251,7 +2251,7 @@ iscsit_handle_logout_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd, if (conn->conn_state != TARG_CONN_STATE_LOGGED_IN) { pr_err("Received logout request on connection that" " is not in logged in state, ignoring request.\n"); - iscsit_release_cmd(cmd); + iscsit_free_cmd(cmd, false); return 0; } @@ -3665,7 +3665,7 @@ iscsit_immediate_queue(struct iscsi_conn *conn, struct iscsi_cmd *cmd, int state list_del(&cmd->i_conn_node); spin_unlock_bh(&conn->cmd_lock); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, false); break; case ISTATE_SEND_NOPIN_WANT_RESPONSE: iscsit_mod_nopin_response_timer(conn); @@ -4122,7 +4122,7 @@ static void iscsit_release_commands_from_conn(struct iscsi_conn *conn) iscsit_increment_maxcmdsn(cmd, sess); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, true); spin_lock_bh(&conn->cmd_lock); } diff --git a/drivers/target/iscsi/iscsi_target_erl2.c b/drivers/target/iscsi/iscsi_target_erl2.c index ba6091b..45a5afd 100644 --- a/drivers/target/iscsi/iscsi_target_erl2.c +++ b/drivers/target/iscsi/iscsi_target_erl2.c @@ -143,7 +143,7 @@ void iscsit_free_connection_recovery_entires(struct iscsi_session *sess) list_del(&cmd->i_conn_node); cmd->conn = NULL; spin_unlock(&cr->conn_recovery_cmd_lock); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, true); spin_lock(&cr->conn_recovery_cmd_lock); } spin_unlock(&cr->conn_recovery_cmd_lock); @@ -165,7 +165,7 @@ void iscsit_free_connection_recovery_entires(struct iscsi_session *sess) list_del(&cmd->i_conn_node); cmd->conn = NULL; spin_unlock(&cr->conn_recovery_cmd_lock); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, true); spin_lock(&cr->conn_recovery_cmd_lock); } spin_unlock(&cr->conn_recovery_cmd_lock); @@ -248,7 +248,7 @@ void iscsit_discard_cr_cmds_by_expstatsn( iscsit_remove_cmd_from_connection_recovery(cmd, sess); spin_unlock(&cr->conn_recovery_cmd_lock); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, true); spin_lock(&cr->conn_recovery_cmd_lock); } spin_unlock(&cr->conn_recovery_cmd_lock); @@ -302,7 +302,7 @@ int iscsit_discard_unacknowledged_ooo_cmdsns_for_conn(struct iscsi_conn *conn) list_del(&cmd->i_conn_node); spin_unlock_bh(&conn->cmd_lock); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, true); spin_lock_bh(&conn->cmd_lock); } spin_unlock_bh(&conn->cmd_lock); @@ -355,7 +355,7 @@ int iscsit_prepare_cmds_for_realligance(struct iscsi_conn *conn) list_del(&cmd->i_conn_node); spin_unlock_bh(&conn->cmd_lock); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, true); spin_lock_bh(&conn->cmd_lock); continue; } @@ -375,7 +375,7 @@ int iscsit_prepare_cmds_for_realligance(struct iscsi_conn *conn) iscsi_sna_gte(cmd->cmd_sn, conn->sess->exp_cmd_sn)) { list_del(&cmd->i_conn_node); spin_unlock_bh(&conn->cmd_lock); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, true); spin_lock_bh(&conn->cmd_lock); continue; } diff --git a/drivers/target/iscsi/iscsi_target_util.c b/drivers/target/iscsi/iscsi_target_util.c index 2cc6c9a..08a3bac 100644 --- a/drivers/target/iscsi/iscsi_target_util.c +++ b/drivers/target/iscsi/iscsi_target_util.c @@ -676,40 +676,56 @@ void iscsit_free_queue_reqs_for_conn(struct iscsi_conn *conn) void iscsit_release_cmd(struct iscsi_cmd *cmd) { - struct iscsi_conn *conn = cmd->conn; - - iscsit_free_r2ts_from_list(cmd); - iscsit_free_all_datain_reqs(cmd); - kfree(cmd->buf_ptr); kfree(cmd->pdu_list); kfree(cmd->seq_list); kfree(cmd->tmr_req); kfree(cmd->iov_data); - if (conn) { + kmem_cache_free(lio_cmd_cache, cmd); +} + +static void __iscsit_free_cmd(struct iscsi_cmd *cmd, bool scsi_cmd, + bool check_queues) +{ + struct iscsi_conn *conn = cmd->conn; + + if (scsi_cmd) { + if (cmd->data_direction == DMA_TO_DEVICE) { + iscsit_stop_dataout_timer(cmd); + iscsit_free_r2ts_from_list(cmd); + } + if (cmd->data_direction == DMA_FROM_DEVICE) + iscsit_free_all_datain_reqs(cmd); + } + + if (conn && check_queues) { iscsit_remove_cmd_from_immediate_queue(cmd, conn); iscsit_remove_cmd_from_response_queue(cmd, conn); } - - kmem_cache_free(lio_cmd_cache, cmd); } -void iscsit_free_cmd(struct iscsi_cmd *cmd) +void iscsit_free_cmd(struct iscsi_cmd *cmd, bool shutdown) { + struct se_cmd *se_cmd = NULL; + int rc; /* * Determine if a struct se_cmd is associated with * this struct iscsi_cmd. */ switch (cmd->iscsi_opcode) { case ISCSI_OP_SCSI_CMD: - if (cmd->data_direction == DMA_TO_DEVICE) - iscsit_stop_dataout_timer(cmd); + se_cmd = &cmd->se_cmd; + __iscsit_free_cmd(cmd, true, shutdown); /* * Fallthrough */ case ISCSI_OP_SCSI_TMFUNC: - transport_generic_free_cmd(&cmd->se_cmd, 1); + rc = transport_generic_free_cmd(&cmd->se_cmd, 1); + if (!rc && shutdown && se_cmd && se_cmd->se_sess) { + __iscsit_free_cmd(cmd, true, shutdown); + target_put_sess_cmd(se_cmd->se_sess, se_cmd); + } break; case ISCSI_OP_REJECT: /* @@ -718,11 +734,19 @@ void iscsit_free_cmd(struct iscsi_cmd *cmd) * associated cmd->se_cmd needs to be released. */ if (cmd->se_cmd.se_tfo != NULL) { - transport_generic_free_cmd(&cmd->se_cmd, 1); + se_cmd = &cmd->se_cmd; + __iscsit_free_cmd(cmd, true, shutdown); + + rc = transport_generic_free_cmd(&cmd->se_cmd, 1); + if (!rc && shutdown && se_cmd->se_sess) { + __iscsit_free_cmd(cmd, true, shutdown); + target_put_sess_cmd(se_cmd->se_sess, se_cmd); + } break; } /* Fall-through */ default: + __iscsit_free_cmd(cmd, false, shutdown); cmd->release_cmd(cmd); break; } diff --git a/drivers/target/iscsi/iscsi_target_util.h b/drivers/target/iscsi/iscsi_target_util.h index 4f8e01a..a442265 100644 --- a/drivers/target/iscsi/iscsi_target_util.h +++ b/drivers/target/iscsi/iscsi_target_util.h @@ -29,7 +29,7 @@ extern void iscsit_remove_cmd_from_tx_queues(struct iscsi_cmd *, struct iscsi_co extern bool iscsit_conn_all_queues_empty(struct iscsi_conn *); extern void iscsit_free_queue_reqs_for_conn(struct iscsi_conn *); extern void iscsit_release_cmd(struct iscsi_cmd *); -extern void iscsit_free_cmd(struct iscsi_cmd *); +extern void iscsit_free_cmd(struct iscsi_cmd *, bool); extern int iscsit_check_session_usage_count(struct iscsi_session *); extern void iscsit_dec_session_usage_count(struct iscsi_session *); extern void iscsit_inc_session_usage_count(struct iscsi_session *); -- cgit v0.10.2 From df66834a43c461de2565c45d815288ba1c0def37 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Wed, 29 May 2013 12:37:17 +1000 Subject: m68k/mac: Fix unexpected interrupt with CONFIG_EARLY_PRINTK The present code does not wait for the SCC to finish resetting itself before trying to initialise the device. The result is that the SCC interrupt sources become enabled (if they weren't already). This leads to an early boot crash (unexpected interrupt) given CONFIG_EARLY_PRINTK. Fix this by adding a delay. A successful reset disables the interrupt sources. Also, after the reset for channel A setup, the SCC then gets a second reset for channel B setup which leaves channel A uninitialised again. Fix this by performing the reset only once. Signed-off-by: Finn Thain Cc: stable@vger.kernel.org Signed-off-by: Geert Uytterhoeven diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S index d197e7f..ac85f16 100644 --- a/arch/m68k/kernel/head.S +++ b/arch/m68k/kernel/head.S @@ -2752,11 +2752,9 @@ func_return get_new_page #ifdef CONFIG_MAC L(scc_initable_mac): - .byte 9,12 /* Reset */ .byte 4,0x44 /* x16, 1 stopbit, no parity */ .byte 3,0xc0 /* receiver: 8 bpc */ .byte 5,0xe2 /* transmitter: 8 bpc, assert dtr/rts */ - .byte 9,0 /* no interrupts */ .byte 10,0 /* NRZ */ .byte 11,0x50 /* use baud rate generator */ .byte 12,1,13,0 /* 38400 baud */ @@ -2899,6 +2897,7 @@ func_start serial_init,%d0/%d1/%a0/%a1 is_not_mac(L(serial_init_not_mac)) #ifdef SERIAL_DEBUG + /* You may define either or both of these. */ #define MAC_USE_SCC_A /* Modem port */ #define MAC_USE_SCC_B /* Printer port */ @@ -2908,9 +2907,21 @@ func_start serial_init,%d0/%d1/%a0/%a1 #define mac_scc_cha_b_data_offset 0x4 #define mac_scc_cha_a_data_offset 0x6 +#if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B) + movel %pc@(L(mac_sccbase)),%a0 + /* Reset SCC device */ + moveb #9,%a0@(mac_scc_cha_a_ctrl_offset) + moveb #0xc0,%a0@(mac_scc_cha_a_ctrl_offset) + /* Wait for 5 PCLK cycles, which is about 68 CPU cycles */ + /* 5 / 3.6864 MHz = approx. 1.36 us = 68 / 50 MHz */ + movel #35,%d0 +5: + subq #1,%d0 + jne 5b +#endif + #ifdef MAC_USE_SCC_A /* Initialize channel A */ - movel %pc@(L(mac_sccbase)),%a0 lea %pc@(L(scc_initable_mac)),%a1 5: moveb %a1@+,%d0 jmi 6f @@ -2922,9 +2933,6 @@ func_start serial_init,%d0/%d1/%a0/%a1 #ifdef MAC_USE_SCC_B /* Initialize channel B */ -#ifndef MAC_USE_SCC_A /* Load mac_sccbase only if needed */ - movel %pc@(L(mac_sccbase)),%a0 -#endif /* MAC_USE_SCC_A */ lea %pc@(L(scc_initable_mac)),%a1 7: moveb %a1@+,%d0 jmi 8f @@ -2933,6 +2941,7 @@ func_start serial_init,%d0/%d1/%a0/%a1 jra 7b 8: #endif /* MAC_USE_SCC_B */ + #endif /* SERIAL_DEBUG */ jra L(serial_init_done) @@ -3006,17 +3015,17 @@ func_start serial_putc,%d0/%d1/%a0/%a1 #ifdef SERIAL_DEBUG -#ifdef MAC_USE_SCC_A +#if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B) movel %pc@(L(mac_sccbase)),%a1 +#endif + +#ifdef MAC_USE_SCC_A 3: btst #2,%a1@(mac_scc_cha_a_ctrl_offset) jeq 3b moveb %d0,%a1@(mac_scc_cha_a_data_offset) #endif /* MAC_USE_SCC_A */ #ifdef MAC_USE_SCC_B -#ifndef MAC_USE_SCC_A /* Load mac_sccbase only if needed */ - movel %pc@(L(mac_sccbase)),%a1 -#endif /* MAC_USE_SCC_A */ 4: btst #2,%a1@(mac_scc_cha_b_ctrl_offset) jeq 4b moveb %d0,%a1@(mac_scc_cha_b_data_offset) -- cgit v0.10.2 From 3ee2102fbe92150af2b6d1d87f6bbefbaff0c7ca Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Fri, 31 May 2013 10:41:04 +0200 Subject: ALSA: hda - Add headset quirk for two Dell machines This quirk is required for the headset mic to work on these two machines. BugLink: https://bugs.launchpad.net/bugs/1186170 Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 9658faf..02e22b4 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3493,6 +3493,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x05f4, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05f5, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05f6, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1028, 0x05f8, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1028, 0x0609, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x103c, 0x1586, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC2), SND_PCI_QUIRK(0x103c, 0x18e6, "HP", ALC269_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x1973, "HP Pavilion", ALC269_FIXUP_HP_MUTE_LED_MIC1), -- cgit v0.10.2 From 45eacc692771bd2b1ea3d384e6345cab3da10861 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Wed, 15 May 2013 22:16:32 +0200 Subject: vtime: Use consistent clocks among nohz accounting While computing the cputime delta of dynticks CPUs, we are mixing up clocks of differents natures: * local_clock() which takes care of unstable clock sources and fix these if needed. * sched_clock() which is the weaker version of local_clock(). It doesn't compute any fixup in case of unstable source. If the clock source is stable, those two clocks are the same and we can safely compute the difference against two random points. Otherwise it results in random deltas as sched_clock() can randomly drift away, back or forward, from local_clock(). As a consequence, some strange behaviour with unstable tsc has been observed such as non progressing constant zero cputime. (The 'top' command showing no load). Fix this by only using local_clock(), or its irq safe/remote equivalent, in vtime code. Reported-by: Mike Galbraith Suggested-by: Mike Galbraith Cc: Steven Rostedt Cc: Paul E. McKenney Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Peter Zijlstra Cc: Borislav Petkov Cc: Li Zhong Cc: Mike Galbraith Signed-off-by: Frederic Weisbecker Signed-off-by: Ingo Molnar diff --git a/include/linux/vtime.h b/include/linux/vtime.h index 71a5782..b1dd2db 100644 --- a/include/linux/vtime.h +++ b/include/linux/vtime.h @@ -34,7 +34,7 @@ static inline void vtime_user_exit(struct task_struct *tsk) } extern void vtime_guest_enter(struct task_struct *tsk); extern void vtime_guest_exit(struct task_struct *tsk); -extern void vtime_init_idle(struct task_struct *tsk); +extern void vtime_init_idle(struct task_struct *tsk, int cpu); #else static inline void vtime_account_irq_exit(struct task_struct *tsk) { @@ -45,7 +45,7 @@ static inline void vtime_user_enter(struct task_struct *tsk) { } static inline void vtime_user_exit(struct task_struct *tsk) { } static inline void vtime_guest_enter(struct task_struct *tsk) { } static inline void vtime_guest_exit(struct task_struct *tsk) { } -static inline void vtime_init_idle(struct task_struct *tsk) { } +static inline void vtime_init_idle(struct task_struct *tsk, int cpu) { } #endif #ifdef CONFIG_IRQ_TIME_ACCOUNTING diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 58453b8..e1a27f9 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -4745,7 +4745,7 @@ void __cpuinit init_idle(struct task_struct *idle, int cpu) */ idle->sched_class = &idle_sched_class; ftrace_graph_init_idle_task(idle, cpu); - vtime_init_idle(idle); + vtime_init_idle(idle, cpu); #if defined(CONFIG_SMP) sprintf(idle->comm, "%s/%d", INIT_TASK_COMM, cpu); #endif diff --git a/kernel/sched/cputime.c b/kernel/sched/cputime.c index cc2dc3e..b5ccba2 100644 --- a/kernel/sched/cputime.c +++ b/kernel/sched/cputime.c @@ -747,17 +747,17 @@ void arch_vtime_task_switch(struct task_struct *prev) write_seqlock(¤t->vtime_seqlock); current->vtime_snap_whence = VTIME_SYS; - current->vtime_snap = sched_clock(); + current->vtime_snap = sched_clock_cpu(smp_processor_id()); write_sequnlock(¤t->vtime_seqlock); } -void vtime_init_idle(struct task_struct *t) +void vtime_init_idle(struct task_struct *t, int cpu) { unsigned long flags; write_seqlock_irqsave(&t->vtime_seqlock, flags); t->vtime_snap_whence = VTIME_SYS; - t->vtime_snap = sched_clock(); + t->vtime_snap = sched_clock_cpu(cpu); write_sequnlock_irqrestore(&t->vtime_seqlock, flags); } -- cgit v0.10.2 From 521921bad1192fb1b8f9b6a5aa673635848b8b5f Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Thu, 16 May 2013 01:21:38 +0200 Subject: kvm: Move guest entry/exit APIs to context_tracking The kvm_host.h header file doesn't handle well inclusion when archs don't support KVM. This results in build crashes for such archs when they want to implement context tracking because this subsystem includes kvm_host.h in order to implement the guest_enter/exit APIs but it doesn't handle KVM off case. To fix this, move the guest_enter()/guest_exit() declarations and generic implementation to the context tracking headers. These generic APIs actually belong to this subsystem, besides other domains boundary tracking like user_enter() et al. KVM now properly becomes a user of this library, not the other buggy way around. Reported-by: Kevin Hilman Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman Signed-off-by: Frederic Weisbecker Cc: Steven Rostedt Cc: Paul E. McKenney Cc: Thomas Gleixner Cc: Peter Zijlstra Cc: Kevin Hilman Cc: Marcelo Tosatti Cc: Gleb Natapov Signed-off-by: Ingo Molnar diff --git a/include/linux/context_tracking.h b/include/linux/context_tracking.h index 365f4a6..fc09d7b 100644 --- a/include/linux/context_tracking.h +++ b/include/linux/context_tracking.h @@ -3,6 +3,7 @@ #include #include +#include #include struct context_tracking { @@ -19,6 +20,26 @@ struct context_tracking { } state; }; +static inline void __guest_enter(void) +{ + /* + * This is running in ioctl context so we can avoid + * the call to vtime_account() with its unnecessary idle check. + */ + vtime_account_system(current); + current->flags |= PF_VCPU; +} + +static inline void __guest_exit(void) +{ + /* + * This is running in ioctl context so we can avoid + * the call to vtime_account() with its unnecessary idle check. + */ + vtime_account_system(current); + current->flags &= ~PF_VCPU; +} + #ifdef CONFIG_CONTEXT_TRACKING DECLARE_PER_CPU(struct context_tracking, context_tracking); @@ -35,6 +56,9 @@ static inline bool context_tracking_active(void) extern void user_enter(void); extern void user_exit(void); +extern void guest_enter(void); +extern void guest_exit(void); + static inline enum ctx_state exception_enter(void) { enum ctx_state prev_ctx; @@ -57,6 +81,17 @@ extern void context_tracking_task_switch(struct task_struct *prev, static inline bool context_tracking_in_user(void) { return false; } static inline void user_enter(void) { } static inline void user_exit(void) { } + +static inline void guest_enter(void) +{ + __guest_enter(); +} + +static inline void guest_exit(void) +{ + __guest_exit(); +} + static inline enum ctx_state exception_enter(void) { return 0; } static inline void exception_exit(enum ctx_state prev_ctx) { } static inline void context_tracking_task_switch(struct task_struct *prev, diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index f0eea07..8db53cf 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -760,42 +761,6 @@ static inline int kvm_iommu_unmap_guest(struct kvm *kvm) } #endif -static inline void __guest_enter(void) -{ - /* - * This is running in ioctl context so we can avoid - * the call to vtime_account() with its unnecessary idle check. - */ - vtime_account_system(current); - current->flags |= PF_VCPU; -} - -static inline void __guest_exit(void) -{ - /* - * This is running in ioctl context so we can avoid - * the call to vtime_account() with its unnecessary idle check. - */ - vtime_account_system(current); - current->flags &= ~PF_VCPU; -} - -#ifdef CONFIG_CONTEXT_TRACKING -extern void guest_enter(void); -extern void guest_exit(void); - -#else /* !CONFIG_CONTEXT_TRACKING */ -static inline void guest_enter(void) -{ - __guest_enter(); -} - -static inline void guest_exit(void) -{ - __guest_exit(); -} -#endif /* !CONFIG_CONTEXT_TRACKING */ - static inline void kvm_guest_enter(void) { unsigned long flags; diff --git a/kernel/context_tracking.c b/kernel/context_tracking.c index 65349f0..85bdde1 100644 --- a/kernel/context_tracking.c +++ b/kernel/context_tracking.c @@ -15,7 +15,6 @@ */ #include -#include #include #include #include -- cgit v0.10.2 From 1a7f829f094dd7951e7d46c571a18080e455a436 Mon Sep 17 00:00:00 2001 From: Li Zhong Date: Fri, 17 May 2013 16:44:04 +0800 Subject: nohz: Fix notifier return val that enforce timekeeping In tick_nohz_cpu_down_callback() if the cpu is the one handling timekeeping, we must return something that stops the CPU_DOWN_PREPARE notifiers and then start notify CPU_DOWN_FAILED on the already called notifier call backs. However traditional errno values are not handled by the notifier unless these are encapsulated using errno_to_notifier(). Hence the current -EINVAL is misinterpreted and converted to junk after notifier_to_errno(), leaving the notifier subsystem to random behaviour such as eventually allowing the cpu to go down. Fix this by using the standard NOTIFY_BAD instead. Signed-off-by: Li Zhong Reviewed-by: Srivatsa S. Bhat Acked-by: Steven Rostedt Cc: Paul E. McKenney Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Peter Zijlstra Cc: Borislav Petkov Signed-off-by: Frederic Weisbecker Signed-off-by: Ingo Molnar diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index f420813..0cf1c14 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -306,7 +306,7 @@ static int __cpuinit tick_nohz_cpu_down_callback(struct notifier_block *nfb, * we can't safely shutdown that CPU. */ if (have_nohz_full_mask && tick_do_timer_cpu == cpu) - return -EINVAL; + return NOTIFY_BAD; break; } return NOTIFY_OK; -- cgit v0.10.2 From b0bc225d0e5de887340d4d92a8c594ef0f60d412 Mon Sep 17 00:00:00 2001 From: Andrew Jones Date: Wed, 29 May 2013 14:48:15 +0200 Subject: sched/x86: Construct all sibling maps if smt Commit 316ad248307fb ("sched/x86: Rewrite set_cpu_sibling_map()") broke the construction of sibling maps, which also broke the booted_cores accounting. Before the rewrite, if smt was present, then each map was updated for each smt sibling. After the rewrite only cpu_sibling_mask gets updated, as the llc and core maps depend on 'has_mc = x86_max_cores > 1' instead. This leads to problems with topologies like the following (qemu -smp sockets=2,cores=1,threads=2) processor : 0 physical id : 0 siblings : 1 <= should be 2 core id : 0 cpu cores : 1 processor : 1 physical id : 0 siblings : 1 <= should be 2 core id : 0 cpu cores : 0 <= should be 1 processor : 2 physical id : 1 siblings : 1 <= should be 2 core id : 0 cpu cores : 1 processor : 3 physical id : 1 siblings : 1 <= should be 2 core id : 0 cpu cores : 0 <= should be 1 This patch restores the former construction by defining has_mc as (has_smt || x86_max_cores > 1). This should be fine as there were no (has_smt && !has_mc) conditions in the context. Aso rename has_mc to has_mp now that it's not just for cores. Signed-off-by: Andrew Jones Acked-by: Peter Zijlstra Cc: a.p.zijlstra@chello.nl Cc: fenghua.yu@intel.com Link: http://lkml.kernel.org/r/1369831695-11970-1-git-send-email-drjones@redhat.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 9c73b51..bfd348e 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -372,15 +372,15 @@ static bool __cpuinit match_mc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o) void __cpuinit set_cpu_sibling_map(int cpu) { - bool has_mc = boot_cpu_data.x86_max_cores > 1; bool has_smt = smp_num_siblings > 1; + bool has_mp = has_smt || boot_cpu_data.x86_max_cores > 1; struct cpuinfo_x86 *c = &cpu_data(cpu); struct cpuinfo_x86 *o; int i; cpumask_set_cpu(cpu, cpu_sibling_setup_mask); - if (!has_smt && !has_mc) { + if (!has_mp) { cpumask_set_cpu(cpu, cpu_sibling_mask(cpu)); cpumask_set_cpu(cpu, cpu_llc_shared_mask(cpu)); cpumask_set_cpu(cpu, cpu_core_mask(cpu)); @@ -394,7 +394,7 @@ void __cpuinit set_cpu_sibling_map(int cpu) if ((i == cpu) || (has_smt && match_smt(c, o))) link_mask(sibling, cpu, i); - if ((i == cpu) || (has_mc && match_llc(c, o))) + if ((i == cpu) || (has_mp && match_llc(c, o))) link_mask(llc_shared, cpu, i); } @@ -406,7 +406,7 @@ void __cpuinit set_cpu_sibling_map(int cpu) for_each_cpu(i, cpu_sibling_setup_mask) { o = &cpu_data(i); - if ((i == cpu) || (has_mc && match_mc(c, o))) { + if ((i == cpu) || (has_mp && match_mc(c, o))) { link_mask(core, cpu, i); /* -- cgit v0.10.2 From f5d00c1f9adb350c24c5301600f7bf2da99b66de Mon Sep 17 00:00:00 2001 From: Jiri Bohac Date: Tue, 28 May 2013 15:29:03 +0200 Subject: tick: Remove useless timekeeping duty attribution to broadcast source Since 7300711e ("clockevents: broadcast fixup possible waiters"), the timekeeping duty is assigned to the CPU that handles the tick broadcast clock device by the time it is set in one shot mode. This is an issue in full dynticks mode where the timekeeping duty must stay handled by the boot CPU for now. Otherwise it prevents secondary CPUs from offlining and this breaks suspend/shutdown/reboot/... As it appears there is no reason for this timekeeping duty to be moved to the broadcast CPU, besides nothing prevent it from being later re-assigned to another target, let's simply remove it. Signed-off-by: Jiri Bohac Reported-by: Steven Rostedt Acked-by: Thomas Gleixner Cc: Steven Rostedt Cc: Thomas Gleixner Cc: Paul E. McKenney Cc: Peter Zijlstra Cc: Borislav Petkov Signed-off-by: Frederic Weisbecker Signed-off-by: Ingo Molnar diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index 0c73942..b4c2455 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -698,10 +698,6 @@ void tick_broadcast_setup_oneshot(struct clock_event_device *bc) bc->event_handler = tick_handle_oneshot_broadcast; - /* Take the do_timer update */ - if (!tick_nohz_full_cpu(cpu)) - tick_do_timer_cpu = cpu; - /* * We must be careful here. There might be other CPUs * waiting for periodic broadcast. We need to set the -- cgit v0.10.2 From 381cc2b9705512ee7c7f1839cbdde374625a2a9f Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Fri, 24 May 2013 12:02:35 +0100 Subject: arm64: treat unhandled compat el0 traps as undef Currently, if a compat process reads or writes from/to a disabled cp15/cp14 register, the trap is not handled by the el0_sync_compat handler, and the kernel will head to bad_mode, where it will die(), and oops(). For 64 bit processes, disabled system register accesses are currently treated as unhandled instructions. This patch modifies entry.S to treat these unhandled traps as undefined instructions, sending a SIGILL to userspace. This gives processes a chance to handle this and stop using inaccessible registers, and prevents further issues in the kernel as a result of the die(). Reported-by: Johannes Jensen Signed-off-by: Mark Rutland Signed-off-by: Catalin Marinas diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index c7e0470..1d13142 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -390,6 +390,16 @@ el0_sync_compat: b.eq el0_fpsimd_exc cmp x24, #ESR_EL1_EC_UNKNOWN // unknown exception in EL0 b.eq el0_undef + cmp x24, #ESR_EL1_EC_CP15_32 // CP15 MRC/MCR trap + b.eq el0_undef + cmp x24, #ESR_EL1_EC_CP15_64 // CP15 MRRC/MCRR trap + b.eq el0_undef + cmp x24, #ESR_EL1_EC_CP14_MR // CP14 MRC/MCR trap + b.eq el0_undef + cmp x24, #ESR_EL1_EC_CP14_LS // CP14 LDC/STC trap + b.eq el0_undef + cmp x24, #ESR_EL1_EC_CP14_64 // CP14 MRRC/MCRR trap + b.eq el0_undef cmp x24, #ESR_EL1_EC_BREAKPT_EL0 // debug exception in EL0 b.ge el0_dbg b el0_inv -- cgit v0.10.2 From 9955ac47f4ba1c95ecb6092aeaefb40a22e99268 Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Tue, 28 May 2013 15:54:15 +0100 Subject: arm64: don't kill the kernel on a bad esr from el0 Rather than completely killing the kernel if we receive an esr value we can't deal with in the el0 handlers, send the process a SIGILL and log the esr value in the hope that we can debug it. If we receive a bad esr from el1, we'll die() as before. Signed-off-by: Mark Rutland Signed-off-by: Catalin Marinas Cc: stable@vger.kernel.org diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c index f1ff9ba..f30852d 100644 --- a/arch/arm64/kernel/traps.c +++ b/arch/arm64/kernel/traps.c @@ -311,14 +311,20 @@ asmlinkage long do_ni_syscall(struct pt_regs *regs) */ asmlinkage void bad_mode(struct pt_regs *regs, int reason, unsigned int esr) { + siginfo_t info; + void __user *pc = (void __user *)instruction_pointer(regs); console_verbose(); pr_crit("Bad mode in %s handler detected, code 0x%08x\n", handler[reason], esr); + __show_regs(regs); + + info.si_signo = SIGILL; + info.si_errno = 0; + info.si_code = ILL_ILLOPC; + info.si_addr = pc; - die("Oops - bad mode", regs, 0); - local_irq_disable(); - panic("bad mode"); + arm64_notify_die("Oops - bad mode", regs, &info, 0); } void __pte_error(const char *file, int line, unsigned long val) -- cgit v0.10.2 From 8b811bae69cf30e0a9676d7dcafb0cf16f13b3bc Mon Sep 17 00:00:00 2001 From: Stefan Weinhuber Date: Tue, 28 May 2013 15:26:06 +0200 Subject: s390/dasd: fix handling of gone paths When a path is gone and dasd_generic_path_event is called with a PE_PATH_GONE event, we must assume that any I/O request on that subchannel is still running. This is unlike the dasd_generic_notify handler and the CIO_NO_PATH event, which implies that the subchannel has been cleared. If dasd_generic_path_event finds that the path has been the last usable path, it must not call dasd_generic_last_path_gone (which would reset the state of running requests), but just set the DASD_STOPPED_DC_WAIT bit. Signed-off-by: Stefan Weinhuber Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 4361d97..d72a9216e 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -3440,8 +3440,16 @@ void dasd_generic_path_event(struct ccw_device *cdev, int *path_event) device->path_data.opm &= ~eventlpm; device->path_data.ppm &= ~eventlpm; device->path_data.npm &= ~eventlpm; - if (oldopm && !device->path_data.opm) - dasd_generic_last_path_gone(device); + if (oldopm && !device->path_data.opm) { + dev_warn(&device->cdev->dev, + "No verified channel paths remain " + "for the device\n"); + DBF_DEV_EVENT(DBF_WARNING, device, + "%s", "last verified path gone"); + dasd_eer_write(device, NULL, DASD_EER_NOPATH); + dasd_device_set_stop_bits(device, + DASD_STOPPED_DC_WAIT); + } } if (path_event[chp] & PE_PATH_AVAILABLE) { device->path_data.opm &= ~eventlpm; -- cgit v0.10.2 From e86cbd8765bd2e1f9eeb209822449c9b1e5958cf Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Wed, 29 May 2013 13:08:39 +0200 Subject: s390/pgtable: Fix gmap notifier address The address of the gmap notifier was broken, resulting in unhandled validity intercepts in KVM. Fix the rmap->vmaddr to be on a segment boundary. Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index 18dc417..a938b54 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -492,7 +492,7 @@ static int gmap_connect_pgtable(unsigned long address, unsigned long segment, mp = (struct gmap_pgtable *) page->index; rmap->gmap = gmap; rmap->entry = segment_ptr; - rmap->vmaddr = address; + rmap->vmaddr = address & PMD_MASK; spin_lock(&mm->page_table_lock); if (*segment_ptr == segment) { list_add(&rmap->list, &mp->mapper); -- cgit v0.10.2 From fa08a396647767abd24a9e7015cb177121d0cf15 Mon Sep 17 00:00:00 2001 From: Ramachandra Rao Gajula Date: Sat, 11 May 2013 15:19:31 -0700 Subject: NVMe: Add MSI support Some devices only have support for MSI, not MSI-X. While MSI is more limited, it still provides better performance than line-based interrupts. Signed-off-by: Ramachandra Gajula Signed-off-by: Matthew Wilcox diff --git a/drivers/block/nvme-core.c b/drivers/block/nvme-core.c index a57d3bc..ce79a59 100644 --- a/drivers/block/nvme-core.c +++ b/drivers/block/nvme-core.c @@ -1637,7 +1637,8 @@ static int set_queue_count(struct nvme_dev *dev, int count) static int nvme_setup_io_queues(struct nvme_dev *dev) { - int result, cpu, i, nr_io_queues, db_bar_size, q_depth; + struct pci_dev *pdev = dev->pci_dev; + int result, cpu, i, nr_io_queues, db_bar_size, q_depth, q_count; nr_io_queues = num_online_cpus(); result = set_queue_count(dev, nr_io_queues); @@ -1646,14 +1647,14 @@ static int nvme_setup_io_queues(struct nvme_dev *dev) if (result < nr_io_queues) nr_io_queues = result; + q_count = nr_io_queues; /* Deregister the admin queue's interrupt */ free_irq(dev->entry[0].vector, dev->queues[0]); db_bar_size = 4096 + ((nr_io_queues + 1) << (dev->db_stride + 3)); if (db_bar_size > 8192) { iounmap(dev->bar); - dev->bar = ioremap(pci_resource_start(dev->pci_dev, 0), - db_bar_size); + dev->bar = ioremap(pci_resource_start(pdev, 0), db_bar_size); dev->dbs = ((void __iomem *)dev->bar) + 4096; dev->queues[0]->q_db = dev->dbs; } @@ -1661,19 +1662,36 @@ static int nvme_setup_io_queues(struct nvme_dev *dev) for (i = 0; i < nr_io_queues; i++) dev->entry[i].entry = i; for (;;) { - result = pci_enable_msix(dev->pci_dev, dev->entry, - nr_io_queues); + result = pci_enable_msix(pdev, dev->entry, nr_io_queues); if (result == 0) { break; } else if (result > 0) { nr_io_queues = result; continue; } else { - nr_io_queues = 1; + nr_io_queues = 0; break; } } + if (nr_io_queues == 0) { + nr_io_queues = q_count; + for (;;) { + result = pci_enable_msi_block(pdev, nr_io_queues); + if (result == 0) { + for (i = 0; i < nr_io_queues; i++) + dev->entry[i].vector = i + pdev->irq; + break; + } else if (result > 0) { + nr_io_queues = result; + continue; + } else { + nr_io_queues = 1; + break; + } + } + } + result = queue_request_irq(dev, dev->queues[0], "nvme admin"); /* XXX: handle failure here */ @@ -1854,7 +1872,10 @@ static void nvme_free_dev(struct kref *kref) { struct nvme_dev *dev = container_of(kref, struct nvme_dev, kref); nvme_dev_remove(dev); - pci_disable_msix(dev->pci_dev); + if (dev->pci_dev->msi_enabled) + pci_disable_msi(dev->pci_dev); + else if (dev->pci_dev->msix_enabled) + pci_disable_msix(dev->pci_dev); iounmap(dev->bar); nvme_release_instance(dev); nvme_release_prp_pools(dev); @@ -1987,7 +2008,10 @@ static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id) unmap: iounmap(dev->bar); disable_msix: - pci_disable_msix(pdev); + if (dev->pci_dev->msi_enabled) + pci_disable_msi(dev->pci_dev); + else if (dev->pci_dev->msix_enabled) + pci_disable_msix(dev->pci_dev); nvme_release_instance(dev); nvme_release_prp_pools(dev); disable: -- cgit v0.10.2 From 24a923e4e9a296a8f8ff852109d423ba07616cc4 Mon Sep 17 00:00:00 2001 From: Dustin Kirkland Date: Fri, 31 May 2013 10:41:43 -0500 Subject: Update eCryptFS maintainers Remove myself from the eCryptFS kernel maintainers. Add the ecryptfs.org website. I will continue to actively maintain and monitor the ecryptfs-utils user space project and packages. Signed-off-by: Dustin Kirkland Signed-off-by: Tyler Hicks diff --git a/MAINTAINERS b/MAINTAINERS index 829c032..d151f5a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2890,8 +2890,8 @@ F: drivers/media/dvb-frontends/ec100* ECRYPT FILE SYSTEM M: Tyler Hicks -M: Dustin Kirkland L: ecryptfs@vger.kernel.org +W: http://ecryptfs.org W: https://launchpad.net/ecryptfs S: Supported F: Documentation/filesystems/ecryptfs.txt -- cgit v0.10.2 From 5d477b6079619910dab882fa229cce1f14f86cf8 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 10 May 2013 14:04:11 +0200 Subject: vfs: Fix invalid ida_remove() call MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When the group id of a shared mount is not allocated, the umount still tries to call mnt_release_group_id(), which eventually hits a kernel warning at ida_remove() spewing a message like: ida_remove called for id=0 which is not allocated. This patch fixes the bug simply checking the group id in the caller. Reported-by: Cristian Rodríguez Signed-off-by: Takashi Iwai Signed-off-by: Al Viro diff --git a/fs/pnode.c b/fs/pnode.c index 3d2a714..9af0df1 100644 --- a/fs/pnode.c +++ b/fs/pnode.c @@ -83,7 +83,8 @@ static int do_make_slave(struct mount *mnt) if (peer_mnt == mnt) peer_mnt = NULL; } - if (IS_MNT_SHARED(mnt) && list_empty(&mnt->mnt_share)) + if (mnt->mnt_group_id && IS_MNT_SHARED(mnt) && + list_empty(&mnt->mnt_share)) mnt_release_group_id(mnt); list_del_init(&mnt->mnt_share); -- cgit v0.10.2 From 801d9d26bfd6e88e9cf0efbb30b649d1bdc15dcf Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 29 May 2013 13:26:53 +0100 Subject: fix buffer leak after "scsi: saner replacements for ->proc_info()" That patch failed to set proc_scsi_fops' .release method. Signed-off-by: Jan Beulich Signed-off-by: Al Viro diff --git a/drivers/scsi/scsi_proc.c b/drivers/scsi/scsi_proc.c index db66357..86f0c5d 100644 --- a/drivers/scsi/scsi_proc.c +++ b/drivers/scsi/scsi_proc.c @@ -84,6 +84,7 @@ static int proc_scsi_host_open(struct inode *inode, struct file *file) static const struct file_operations proc_scsi_fops = { .open = proc_scsi_host_open, + .release = single_release, .read = seq_read, .llseek = seq_lseek, .write = proc_scsi_host_write -- cgit v0.10.2 From 1d7095c72d35eee4ebc28e66563e636b9adafeb2 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 May 2013 15:21:56 -0400 Subject: qnx6: qnx6_readdir() has a braino in pos calculation We want to mask lower 5 bits out, not leave only those and clear the rest... As it is, we end up always starting to read from the beginning of directory, no matter what the current position had been. Signed-off-by: Al Viro diff --git a/fs/qnx6/dir.c b/fs/qnx6/dir.c index 8798d06..afa6be6 100644 --- a/fs/qnx6/dir.c +++ b/fs/qnx6/dir.c @@ -120,7 +120,7 @@ static int qnx6_readdir(struct file *filp, void *dirent, filldir_t filldir) struct inode *inode = file_inode(filp); struct super_block *s = inode->i_sb; struct qnx6_sb_info *sbi = QNX6_SB(s); - loff_t pos = filp->f_pos & (QNX6_DIR_ENTRY_SIZE - 1); + loff_t pos = filp->f_pos & ~(QNX6_DIR_ENTRY_SIZE - 1); unsigned long npages = dir_pages(inode); unsigned long n = pos >> PAGE_CACHE_SHIFT; unsigned start = (pos & ~PAGE_CACHE_MASK) / QNX6_DIR_ENTRY_SIZE; -- cgit v0.10.2 From 31abdab9c11bb1694ecd1476a7edbe8e964d94ac Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 18 May 2013 02:38:52 -0400 Subject: hpfs: deadlock and race in directory lseek() For one thing, there's an ABBA deadlock on hpfs fs-wide lock and i_mutex in hpfs_dir_lseek() - there's a lot of methods that grab the former with the caller already holding the latter, so it must take i_mutex first. For another, locking the damn thing, carefully validating the offset, then dropping locks and assigning the offset is obviously racy. Moreover, we _must_ do hpfs_add_pos(), or the machinery in dnode.c won't modify the sucker on B-tree surgeries. Signed-off-by: Al Viro diff --git a/fs/hpfs/dir.c b/fs/hpfs/dir.c index 546f6d3..834ac13 100644 --- a/fs/hpfs/dir.c +++ b/fs/hpfs/dir.c @@ -33,25 +33,27 @@ static loff_t hpfs_dir_lseek(struct file *filp, loff_t off, int whence) if (whence == SEEK_DATA || whence == SEEK_HOLE) return -EINVAL; + mutex_lock(&i->i_mutex); hpfs_lock(s); /*printk("dir lseek\n");*/ if (new_off == 0 || new_off == 1 || new_off == 11 || new_off == 12 || new_off == 13) goto ok; - mutex_lock(&i->i_mutex); pos = ((loff_t) hpfs_de_as_down_as_possible(s, hpfs_inode->i_dno) << 4) + 1; while (pos != new_off) { if (map_pos_dirent(i, &pos, &qbh)) hpfs_brelse4(&qbh); else goto fail; if (pos == 12) goto fail; } - mutex_unlock(&i->i_mutex); + hpfs_add_pos(i, &filp->f_pos); ok: + filp->f_pos = new_off; hpfs_unlock(s); - return filp->f_pos = new_off; -fail: mutex_unlock(&i->i_mutex); + return new_off; +fail: /*printk("illegal lseek: %016llx\n", new_off);*/ hpfs_unlock(s); + mutex_unlock(&i->i_mutex); return -ESPIPE; } -- cgit v0.10.2 From 448293aadb54ab38b9c053bf9f1eecafdc0ed214 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 22 May 2013 13:41:26 -0400 Subject: befs_readdir(): do not increment ->f_pos if filldir tells us to stop Signed-off-by: Al Viro diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c index 8615ee8..f95dddc 100644 --- a/fs/befs/linuxvfs.c +++ b/fs/befs/linuxvfs.c @@ -265,8 +265,8 @@ befs_readdir(struct file *filp, void *dirent, filldir_t filldir) result = filldir(dirent, keybuf, keysize, filp->f_pos, (ino_t) value, d_type); } - - filp->f_pos++; + if (!result) + filp->f_pos++; befs_debug(sb, "<--- befs_readdir() filp->f_pos %Ld", filp->f_pos); -- cgit v0.10.2 From 65ac057bce426b4abdf42384c4e09e40a634df32 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Fri, 31 May 2013 14:28:38 +0000 Subject: trivial: atmel_lcdfb: add missing error message When a too small framebuffer is given, the atmel_lcdfb_check_var silently fails. Adding an error message will save some head scratching. Signed-off-by: Richard Genoud Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 540909d..6e6491f 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -461,8 +461,11 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var, if (info->fix.smem_len) { unsigned int smem_len = (var->xres_virtual * var->yres_virtual * ((var->bits_per_pixel + 7) / 8)); - if (smem_len > info->fix.smem_len) + if (smem_len > info->fix.smem_len) { + dev_err(dev, "Frame buffer is too small (%u) for screen size (need at least %u)\n", + info->fix.smem_len, smem_len); return -EINVAL; + } } /* Saturate vertical and horizontal timings at maximum values */ -- cgit v0.10.2 From 56c21b53ab071feb3ce93375a563ead745fa7105 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Fri, 31 May 2013 15:49:35 +0000 Subject: atmel_lcdfb: blank the backlight on remove When removing atmel_lcdfb module, the backlight is unregistered but not blanked. (only for CONFIG_BACKLIGHT_ATMEL_LCDC case). This can result in the screen going full white depending on how the PWM is wired. Signed-off-by: Richard Genoud Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 6e6491f..effdb37 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -223,8 +223,14 @@ static void init_backlight(struct atmel_lcdfb_info *sinfo) static void exit_backlight(struct atmel_lcdfb_info *sinfo) { - if (sinfo->backlight) - backlight_device_unregister(sinfo->backlight); + if (!sinfo->backlight) + return; + + if (sinfo->backlight->ops) { + sinfo->backlight->props.power = FB_BLANK_POWERDOWN; + sinfo->backlight->ops->update_status(sinfo->backlight); + } + backlight_device_unregister(sinfo->backlight); } #else -- cgit v0.10.2 From 4ad1f70ebcdb69393ce083f514bf4a4a3a3e65cb Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 23 May 2013 04:38:22 -0400 Subject: zoran: racy refcount handling in vm_ops ->open()/->close() worse, we lock ->resource_lock too late when we are destroying the final clonal VMA; the check for lack of other mappings of the same opened file can race with mmap(). Signed-off-by: Al Viro diff --git a/drivers/media/pci/zoran/zoran.h b/drivers/media/pci/zoran/zoran.h index ca2754a..5e04008 100644 --- a/drivers/media/pci/zoran/zoran.h +++ b/drivers/media/pci/zoran/zoran.h @@ -176,7 +176,7 @@ struct zoran_fh; struct zoran_mapping { struct zoran_fh *fh; - int count; + atomic_t count; }; struct zoran_buffer { diff --git a/drivers/media/pci/zoran/zoran_driver.c b/drivers/media/pci/zoran/zoran_driver.c index 1168a84..d133c30 100644 --- a/drivers/media/pci/zoran/zoran_driver.c +++ b/drivers/media/pci/zoran/zoran_driver.c @@ -2803,8 +2803,7 @@ static void zoran_vm_open (struct vm_area_struct *vma) { struct zoran_mapping *map = vma->vm_private_data; - - map->count++; + atomic_inc(&map->count); } static void @@ -2815,7 +2814,7 @@ zoran_vm_close (struct vm_area_struct *vma) struct zoran *zr = fh->zr; int i; - if (--map->count > 0) + if (!atomic_dec_and_mutex_lock(&map->count, &zr->resource_lock)) return; dprintk(3, KERN_INFO "%s: %s - munmap(%s)\n", ZR_DEVNAME(zr), @@ -2828,14 +2827,16 @@ zoran_vm_close (struct vm_area_struct *vma) kfree(map); /* Any buffers still mapped? */ - for (i = 0; i < fh->buffers.num_buffers; i++) - if (fh->buffers.buffer[i].map) + for (i = 0; i < fh->buffers.num_buffers; i++) { + if (fh->buffers.buffer[i].map) { + mutex_unlock(&zr->resource_lock); return; + } + } dprintk(3, KERN_INFO "%s: %s - free %s buffers\n", ZR_DEVNAME(zr), __func__, mode_name(fh->map_mode)); - mutex_lock(&zr->resource_lock); if (fh->map_mode == ZORAN_MAP_MODE_RAW) { if (fh->buffers.active != ZORAN_FREE) { @@ -2939,7 +2940,7 @@ zoran_mmap (struct file *file, goto mmap_unlock_and_return; } map->fh = fh; - map->count = 1; + atomic_set(&map->count, 1); vma->vm_ops = &zoran_vm_ops; vma->vm_flags |= VM_DONTEXPAND; -- cgit v0.10.2 From 7de3d66b1387ddf5a37d9689e5eb8510fb75c765 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 31 May 2013 08:53:07 -0700 Subject: x86: Fix adjust_range_size_mask calling position Commit 8d57470d x86, mm: setup page table in top-down causes a kernel panic while setting mem=2G. [mem 0x00000000-0x000fffff] page 4k [mem 0x7fe00000-0x7fffffff] page 1G [mem 0x7c000000-0x7fdfffff] page 1G [mem 0x00100000-0x001fffff] page 4k [mem 0x00200000-0x7bffffff] page 2M for last entry is not what we want, we should have [mem 0x00200000-0x3fffffff] page 2M [mem 0x40000000-0x7bffffff] page 1G Actually we merge the continuous ranges with same page size too early. in this case, before merging we have [mem 0x00200000-0x3fffffff] page 2M [mem 0x40000000-0x7bffffff] page 2M after merging them, will get [mem 0x00200000-0x7bffffff] page 2M even we can use 1G page to map [mem 0x40000000-0x7bffffff] that will cause problem, because we already map [mem 0x7fe00000-0x7fffffff] page 1G [mem 0x7c000000-0x7fdfffff] page 1G with 1G page, aka [0x40000000-0x7fffffff] is mapped with 1G page already. During phys_pud_init() for [0x40000000-0x7bffffff], it will not reuse existing that pud page, and allocate new one then try to use 2M page to map it instead, as page_size_mask does not include PG_LEVEL_1G. At end will have [7c000000-0x7fffffff] not mapped, loop in phys_pmd_init stop mapping at 0x7bffffff. That is right behavoir, it maps exact range with exact page size that we ask, and we should explicitly call it to map [7c000000-0x7fffffff] before or after mapping 0x40000000-0x7bffffff. Anyway we need to make sure ranges' page_size_mask correct and consistent after split_mem_range for each range. Fix that by calling adjust_range_size_mask before merging range with same page size. -v2: update change log. -v3: add more explanation why [7c000000-0x7fffffff] is not mapped, and it causes panic. Bisected-by: "Xie, ChanglongX" Bisected-by: Yuanhan Liu Reported-and-tested-by: Yuanhan Liu Signed-off-by: Yinghai Lu Link: http://lkml.kernel.org/r/1370015587-20835-1-git-send-email-yinghai@kernel.org Cc: v3.9 Signed-off-by: H. Peter Anvin diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index eaac174..1f34e92 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -277,6 +277,9 @@ static int __meminit split_mem_range(struct map_range *mr, int nr_range, end_pfn = limit_pfn; nr_range = save_mr(mr, nr_range, start_pfn, end_pfn, 0); + if (!after_bootmem) + adjust_range_page_size_mask(mr, nr_range); + /* try to merge same page size and continuous */ for (i = 0; nr_range > 1 && i < nr_range - 1; i++) { unsigned long old_start; @@ -291,9 +294,6 @@ static int __meminit split_mem_range(struct map_range *mr, int nr_range, nr_range--; } - if (!after_bootmem) - adjust_range_page_size_mask(mr, nr_range); - for (i = 0; i < nr_range; i++) printk(KERN_DEBUG " [mem %#010lx-%#010lx] page %s\n", mr[i].start, mr[i].end - 1, -- cgit v0.10.2 From 0bdc7acba56a7ca4232f15f37b16f7ec079385ab Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Fri, 31 May 2013 15:07:52 -0400 Subject: reiserfs: fix spurious multiple-fill in reiserfs_readdir_dentry After sleeping for filldir(), we check to see if the file system has changed and research. The next_pos pointer is updated but its value isn't pushed into the key used for the search itself. As a result, the search returns the same item that the last cycle of the loop did and filldir() is called multiple times with the same data. The end result is that the buffer can contain the same name multiple times. This can be returned to userspace or used internally in the xattr code where it can manifest with the following warning: jdm-20004 reiserfs_delete_xattrs: Couldn't delete all xattrs (-2) reiserfs_for_each_xattr uses reiserfs_readdir_dentry to iterate over the xattr names and ends up trying to unlink the same name twice. The second attempt fails with -ENOENT and the error is returned. At some point I'll need to add support into reiserfsck to remove the orphaned directories left behind when this occurs. The fix is to push the value into the key before researching. Signed-off-by: Jeff Mahoney Signed-off-by: Jan Kara diff --git a/fs/reiserfs/dir.c b/fs/reiserfs/dir.c index 66c53b6..6c2d136 100644 --- a/fs/reiserfs/dir.c +++ b/fs/reiserfs/dir.c @@ -204,6 +204,8 @@ int reiserfs_readdir_dentry(struct dentry *dentry, void *dirent, next_pos = deh_offset(deh) + 1; if (item_moved(&tmp_ih, &path_to_entry)) { + set_cpu_key_k_offset(&pos_key, + next_pos); goto research; } } /* for */ -- cgit v0.10.2 From 4a8570112b76a63ad21cfcbe2783f98f7fd5ba1b Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Fri, 31 May 2013 15:54:17 -0400 Subject: reiserfs: fix problems with chowning setuid file w/ xattrs reiserfs_chown_xattrs() takes the iattr struct passed into ->setattr and uses it to iterate over all the attrs associated with a file to change ownership of xattrs (and transfer quota associated with the xattr files). When the setuid bit is cleared during chown, ATTR_MODE and iattr->ia_mode are passed to all the xattrs as well. This means that the xattr directory will have S_IFREG added to its mode bits. This has been prevented in practice by a missing IS_PRIVATE check in reiserfs_acl_chmod, which caused a double-lock to occur while holding the write lock. Since the file system was completely locked up, the writeout of the corrupted mode never happened. This patch temporarily clears everything but ATTR_UID|ATTR_GID for the calls to reiserfs_setattr and adds the missing IS_PRIVATE check. Signed-off-by: Jeff Mahoney Signed-off-by: Jan Kara diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index 4cce1d9..821bcf7 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -318,7 +318,19 @@ static int delete_one_xattr(struct dentry *dentry, void *data) static int chown_one_xattr(struct dentry *dentry, void *data) { struct iattr *attrs = data; - return reiserfs_setattr(dentry, attrs); + int ia_valid = attrs->ia_valid; + int err; + + /* + * We only want the ownership bits. Otherwise, we'll do + * things like change a directory to a regular file if + * ATTR_MODE is set. + */ + attrs->ia_valid &= (ATTR_UID|ATTR_GID); + err = reiserfs_setattr(dentry, attrs); + attrs->ia_valid = ia_valid; + + return err; } /* No i_mutex, but the inode is unconnected. */ diff --git a/fs/reiserfs/xattr_acl.c b/fs/reiserfs/xattr_acl.c index d7c01ef..6c8767f 100644 --- a/fs/reiserfs/xattr_acl.c +++ b/fs/reiserfs/xattr_acl.c @@ -443,6 +443,9 @@ int reiserfs_acl_chmod(struct inode *inode) int depth; int error; + if (IS_PRIVATE(inode)) + return 0; + if (S_ISLNK(inode->i_mode)) return -EOPNOTSUPP; -- cgit v0.10.2 From a1457c0ce976bad1356b9b0437f2a5c3ab8a9cfc Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Fri, 31 May 2013 15:51:17 -0400 Subject: reiserfs: fix deadlock with nfs racing on create/lookup Reiserfs is currently able to be deadlocked by having two NFS clients where one has removed and recreated a file and another is accessing the file with an open file handle. If one client deletes and recreates a file with timing such that the recreated file obtains the same [dirid, objectid] pair as the original file while another client accesses the file via file handle, the create and lookup can race and deadlock if the lookup manages to create the in-memory inode first. The create thread, in insert_inode_locked4, will hold the write lock while waiting on the other inode to be unlocked. The lookup thread, anywhere in the iget path, will release and reacquire the write lock while it schedules. If it needs to reacquire the lock while the create thread has it, it will never be able to make forward progress because it needs to reacquire the lock before ultimately unlocking the inode. This patch drops the write lock across the insert_inode_locked4 call so that the ordering of inode_wait -> write lock is retained. Since this would have been the case before the BKL push-down, this is safe. Signed-off-by: Jeff Mahoney Signed-off-by: Jan Kara diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c index 77d6d47..f844533 100644 --- a/fs/reiserfs/inode.c +++ b/fs/reiserfs/inode.c @@ -1811,11 +1811,16 @@ int reiserfs_new_inode(struct reiserfs_transaction_handle *th, TYPE_STAT_DATA, SD_SIZE, MAX_US_INT); memcpy(INODE_PKEY(inode), &(ih.ih_key), KEY_SIZE); args.dirid = le32_to_cpu(ih.ih_key.k_dir_id); - if (insert_inode_locked4(inode, args.objectid, - reiserfs_find_actor, &args) < 0) { + + reiserfs_write_unlock(inode->i_sb); + err = insert_inode_locked4(inode, args.objectid, + reiserfs_find_actor, &args); + reiserfs_write_lock(inode->i_sb); + if (err) { err = -EINVAL; goto out_bad_inode; } + if (old_format_only(sb)) /* not a perfect generation count, as object ids can be reused, but ** this is as good as reiserfs can do right now. -- cgit v0.10.2 From 1fc29bacedeabb278080e31bb9c1ecb49f143c3b Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 31 May 2013 10:00:18 -0400 Subject: cifs: fix off-by-one bug in build_unc_path_to_root commit 839db3d10a (cifs: fix up handling of prefixpath= option) changed the code such that the vol->prepath no longer contained a leading delimiter and then fixed up the places that accessed that field to account for that change. One spot in build_unc_path_to_root was missed however. When doing the pointer addition on pos, that patch failed to account for the fact that we had already incremented "pos" by one when adding the length of the prepath. This caused a buffer overrun by one byte. This patch fixes the problem by correcting the handling of "pos". Cc: # v3.8+ Reported-by: Marcus Moeller Reported-by: Ken Fallon Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 5b97e56..e3bc39b 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -3279,8 +3279,8 @@ build_unc_path_to_root(const struct smb_vol *vol, pos = full_path + unc_len; if (pplen) { - *pos++ = CIFS_DIR_SEP(cifs_sb); - strncpy(pos, vol->prepath, pplen); + *pos = CIFS_DIR_SEP(cifs_sb); + strncpy(pos + 1, vol->prepath, pplen); pos += pplen; } -- cgit v0.10.2 From 35f7097fcedec63fcba1852dbee96f74a2d90878 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Sun, 26 May 2013 18:09:37 +0000 Subject: powerpc/tm: Make room for hypervisor in abort cause codes PAPR carves out 0xff-0xe0 for hypervisor use of transactional memory software abort cause codes. Unfortunately we don't respect this currently. Below fixes this to move our cause codes to below this region. Signed-off-by: Michael Neuling Cc: # 3.9 only Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index a613651..8f6a94b 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -113,14 +113,15 @@ /* Reason codes describing kernel causes for transaction aborts. By convention, bit0 is copied to TEXASR[56] (IBM bit 7) which is set if - the failure is persistent. + the failure is persistent. PAPR saves 0xff-0xe0 for the hypervisor. */ -#define TM_CAUSE_RESCHED 0xfe -#define TM_CAUSE_TLBI 0xfc -#define TM_CAUSE_FAC_UNAV 0xfa -#define TM_CAUSE_SYSCALL 0xf9 /* Persistent */ -#define TM_CAUSE_MISC 0xf6 -#define TM_CAUSE_SIGNAL 0xf4 +#define TM_CAUSE_PERSISTENT 0x01 +#define TM_CAUSE_RESCHED 0xde +#define TM_CAUSE_TLBI 0xdc +#define TM_CAUSE_FAC_UNAV 0xda +#define TM_CAUSE_SYSCALL 0xd8 /* future use */ +#define TM_CAUSE_MISC 0xd6 /* future use */ +#define TM_CAUSE_SIGNAL 0xd4 #if defined(CONFIG_PPC_BOOK3S_64) #define MSR_64BIT MSR_SF -- cgit v0.10.2 From 24b92375dc4ec8a15262e8aaaab60b7404d4b1e7 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Sun, 26 May 2013 18:09:38 +0000 Subject: powerpc/tm: Update cause codes documentation Signed-off-by: Michael Neuling Cc: # 3.9 only Signed-off-by: Benjamin Herrenschmidt diff --git a/Documentation/powerpc/transactional_memory.txt b/Documentation/powerpc/transactional_memory.txt index c907be4..84e04a0 100644 --- a/Documentation/powerpc/transactional_memory.txt +++ b/Documentation/powerpc/transactional_memory.txt @@ -155,6 +155,7 @@ These are defined in , and distinguish different reasons why the kernel aborted a transaction: TM_CAUSE_RESCHED Thread was rescheduled. + TM_CAUSE_TLBI Software TLB invalide. TM_CAUSE_FAC_UNAV FP/VEC/VSX unavailable trap. TM_CAUSE_SYSCALL Currently unused; future syscalls that must abort transactions for consistency will use this. -- cgit v0.10.2 From 6ce6c629fd8254b3177650de99699682ff7f6707 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Sun, 26 May 2013 18:09:39 +0000 Subject: powerpc/tm: Abort on emulation and alignment faults If we are emulating an instruction inside an active user transaction that touches memory, the kernel can't emulate it as it operates in transactional suspend context. We need to abort these transactions and send them back to userspace for the hardware to rollback. We can service these if the user transaction is in suspend mode, since the kernel will operate in the same suspend context. This adds a check to all alignment faults and to specific instruction emulations (only string instructions for now). If the user process is in an active (non-suspended) transaction, we abort the transaction go back to userspace allowing the HW to roll back the transaction and tell the user of the failure. This also adds new tm abort cause codes to report the reason of the persistent error to the user. Crappy test case here http://neuling.org/devel/junkcode/aligntm.c Signed-off-by: Michael Neuling Cc: # v3.9 Signed-off-by: Benjamin Herrenschmidt diff --git a/Documentation/powerpc/transactional_memory.txt b/Documentation/powerpc/transactional_memory.txt index 84e04a0..c54bf31 100644 --- a/Documentation/powerpc/transactional_memory.txt +++ b/Documentation/powerpc/transactional_memory.txt @@ -161,9 +161,12 @@ kernel aborted a transaction: transactions for consistency will use this. TM_CAUSE_SIGNAL Signal delivered. TM_CAUSE_MISC Currently unused. + TM_CAUSE_ALIGNMENT Alignment fault. + TM_CAUSE_EMULATE Emulation that touched memory. -These can be checked by the user program's abort handler as TEXASR[0:7]. - +These can be checked by the user program's abort handler as TEXASR[0:7]. If +bit 7 is set, it indicates that the error is consider persistent. For example +a TM_CAUSE_ALIGNMENT will be persistent while a TM_CAUSE_RESCHED will not.q GDB === diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index 8f6a94b..d0528e0 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -122,6 +122,8 @@ #define TM_CAUSE_SYSCALL 0xd8 /* future use */ #define TM_CAUSE_MISC 0xd6 /* future use */ #define TM_CAUSE_SIGNAL 0xd4 +#define TM_CAUSE_ALIGNMENT 0xd2 +#define TM_CAUSE_EMULATE 0xd0 #if defined(CONFIG_PPC_BOOK3S_64) #define MSR_64BIT MSR_SF diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index a7a648f..f18c79c 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -53,6 +53,7 @@ #ifdef CONFIG_PPC64 #include #include +#include #endif #include #include @@ -932,6 +933,28 @@ static int emulate_isel(struct pt_regs *regs, u32 instword) return 0; } +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +static inline bool tm_abort_check(struct pt_regs *regs, int cause) +{ + /* If we're emulating a load/store in an active transaction, we cannot + * emulate it as the kernel operates in transaction suspended context. + * We need to abort the transaction. This creates a persistent TM + * abort so tell the user what caused it with a new code. + */ + if (MSR_TM_TRANSACTIONAL(regs->msr)) { + tm_enable(); + tm_abort(cause); + return true; + } + return false; +} +#else +static inline bool tm_abort_check(struct pt_regs *regs, int reason) +{ + return false; +} +#endif + static int emulate_instruction(struct pt_regs *regs) { u32 instword; @@ -971,6 +994,9 @@ static int emulate_instruction(struct pt_regs *regs) /* Emulate load/store string insn. */ if ((instword & PPC_INST_STRING_GEN_MASK) == PPC_INST_STRING) { + if (tm_abort_check(regs, + TM_CAUSE_EMULATE | TM_CAUSE_PERSISTENT)) + return -EINVAL; PPC_WARN_EMULATED(string, regs); return emulate_string_inst(regs, instword); } @@ -1148,6 +1174,9 @@ void alignment_exception(struct pt_regs *regs) if (!arch_irq_disabled_regs(regs)) local_irq_enable(); + if (tm_abort_check(regs, TM_CAUSE_ALIGNMENT | TM_CAUSE_PERSISTENT)) + goto bail; + /* we don't implement logging of alignment exceptions */ if (!(current->thread.align_ctl & PR_UNALIGN_SIGBUS)) fixed = fix_alignment(regs); -- cgit v0.10.2 From b75c100ef24894bd2c8b52e123bcc5f191c5d9fd Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Sun, 26 May 2013 18:30:56 +0000 Subject: powerpc/tm: Move TM abort cause codes to uapi These cause codes are usable by userspace, so let's export to uapi. Signed-off-by: Michael Neuling Cc: # v3.9 Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index d0528e0..4a9e408 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -111,20 +111,6 @@ #define MSR_TM_TRANSACTIONAL(x) (((x) & MSR_TS_MASK) == MSR_TS_T) #define MSR_TM_SUSPENDED(x) (((x) & MSR_TS_MASK) == MSR_TS_S) -/* Reason codes describing kernel causes for transaction aborts. By - convention, bit0 is copied to TEXASR[56] (IBM bit 7) which is set if - the failure is persistent. PAPR saves 0xff-0xe0 for the hypervisor. -*/ -#define TM_CAUSE_PERSISTENT 0x01 -#define TM_CAUSE_RESCHED 0xde -#define TM_CAUSE_TLBI 0xdc -#define TM_CAUSE_FAC_UNAV 0xda -#define TM_CAUSE_SYSCALL 0xd8 /* future use */ -#define TM_CAUSE_MISC 0xd6 /* future use */ -#define TM_CAUSE_SIGNAL 0xd4 -#define TM_CAUSE_ALIGNMENT 0xd2 -#define TM_CAUSE_EMULATE 0xd0 - #if defined(CONFIG_PPC_BOOK3S_64) #define MSR_64BIT MSR_SF diff --git a/arch/powerpc/include/asm/tm.h b/arch/powerpc/include/asm/tm.h index 4b4449a..9dfbc34 100644 --- a/arch/powerpc/include/asm/tm.h +++ b/arch/powerpc/include/asm/tm.h @@ -5,6 +5,8 @@ * Copyright 2012 Matt Evans & Michael Neuling, IBM Corporation. */ +#include + #ifdef CONFIG_PPC_TRANSACTIONAL_MEM extern void do_load_up_transact_fpu(struct thread_struct *thread); extern void do_load_up_transact_altivec(struct thread_struct *thread); diff --git a/arch/powerpc/include/uapi/asm/Kbuild b/arch/powerpc/include/uapi/asm/Kbuild index f7bca63..5182c86 100644 --- a/arch/powerpc/include/uapi/asm/Kbuild +++ b/arch/powerpc/include/uapi/asm/Kbuild @@ -40,6 +40,7 @@ header-y += statfs.h header-y += swab.h header-y += termbits.h header-y += termios.h +header-y += tm.h header-y += types.h header-y += ucontext.h header-y += unistd.h diff --git a/arch/powerpc/include/uapi/asm/tm.h b/arch/powerpc/include/uapi/asm/tm.h new file mode 100644 index 0000000..85059a0 --- /dev/null +++ b/arch/powerpc/include/uapi/asm/tm.h @@ -0,0 +1,18 @@ +#ifndef _ASM_POWERPC_TM_H +#define _ASM_POWERPC_TM_H + +/* Reason codes describing kernel causes for transaction aborts. By + * convention, bit0 is copied to TEXASR[56] (IBM bit 7) which is set if + * the failure is persistent. PAPR saves 0xff-0xe0 for the hypervisor. + */ +#define TM_CAUSE_PERSISTENT 0x01 +#define TM_CAUSE_RESCHED 0xde +#define TM_CAUSE_TLBI 0xdc +#define TM_CAUSE_FAC_UNAV 0xda +#define TM_CAUSE_SYSCALL 0xd8 /* future use */ +#define TM_CAUSE_MISC 0xd6 /* future use */ +#define TM_CAUSE_SIGNAL 0xd4 +#define TM_CAUSE_ALIGNMENT 0xd2 +#define TM_CAUSE_EMULATE 0xd0 + +#endif -- cgit v0.10.2 From 2b3f8e87cf99a33fb6faf5026d7147748bbd77b6 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Sun, 26 May 2013 18:09:41 +0000 Subject: powerpc/tm: Fix userspace stack corruption on signal delivery for active transactions When in an active transaction that takes a signal, we need to be careful with the stack. It's possible that the stack has moved back up after the tbegin. The obvious case here is when the tbegin is called inside a function that returns before a tend. In this case, the stack is part of the checkpointed transactional memory state. If we write over this non transactionally or in suspend, we are in trouble because if we get a tm abort, the program counter and stack pointer will be back at the tbegin but our in memory stack won't be valid anymore. To avoid this, when taking a signal in an active transaction, we need to use the stack pointer from the checkpointed state, rather than the speculated state. This ensures that the signal context (written tm suspended) will be written below the stack required for the rollback. The transaction is aborted becuase of the treclaim, so any memory written between the tbegin and the signal will be rolled back anyway. For signals taken in non-TM or suspended mode, we use the normal/non-checkpointed stack pointer. Tested with 64 and 32 bit signals Signed-off-by: Michael Neuling Cc: # v3.9 Signed-off-by: Benjamin Herrenschmidt diff --git a/Documentation/powerpc/transactional_memory.txt b/Documentation/powerpc/transactional_memory.txt index c54bf31..dc23e58 100644 --- a/Documentation/powerpc/transactional_memory.txt +++ b/Documentation/powerpc/transactional_memory.txt @@ -147,6 +147,25 @@ Example signal handler: fix_the_problem(ucp->dar); } +When in an active transaction that takes a signal, we need to be careful with +the stack. It's possible that the stack has moved back up after the tbegin. +The obvious case here is when the tbegin is called inside a function that +returns before a tend. In this case, the stack is part of the checkpointed +transactional memory state. If we write over this non transactionally or in +suspend, we are in trouble because if we get a tm abort, the program counter and +stack pointer will be back at the tbegin but our in memory stack won't be valid +anymore. + +To avoid this, when taking a signal in an active transaction, we need to use +the stack pointer from the checkpointed state, rather than the speculated +state. This ensures that the signal context (written tm suspended) will be +written below the stack required for the rollback. The transaction is aborted +becuase of the treclaim, so any memory written between the tbegin and the +signal will be rolled back anyway. + +For signals taken in non-TM or suspended mode, we use the +normal/non-checkpointed stack pointer. + Failure cause codes used by kernel ================================== diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 594db6b..14a6583 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -409,21 +409,16 @@ static inline void prefetchw(const void *x) #endif #ifdef CONFIG_PPC64 -static inline unsigned long get_clean_sp(struct pt_regs *regs, int is_32) +static inline unsigned long get_clean_sp(unsigned long sp, int is_32) { - unsigned long sp; - if (is_32) - sp = regs->gpr[1] & 0x0ffffffffUL; - else - sp = regs->gpr[1]; - + return sp & 0x0ffffffffUL; return sp; } #else -static inline unsigned long get_clean_sp(struct pt_regs *regs, int is_32) +static inline unsigned long get_clean_sp(unsigned long sp, int is_32) { - return regs->gpr[1]; + return sp; } #endif diff --git a/arch/powerpc/include/asm/signal.h b/arch/powerpc/include/asm/signal.h index fbe66c4..9322c28 100644 --- a/arch/powerpc/include/asm/signal.h +++ b/arch/powerpc/include/asm/signal.h @@ -3,5 +3,8 @@ #define __ARCH_HAS_SA_RESTORER #include +#include + +extern unsigned long get_tm_stackpointer(struct pt_regs *regs); #endif /* _ASM_POWERPC_SIGNAL_H */ diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index 577a8aa..457e97a 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -18,6 +18,7 @@ #include #include #include +#include #include "signal.h" @@ -30,13 +31,13 @@ int show_unhandled_signals = 1; /* * Allocate space for the signal frame */ -void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, +void __user * get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size, int is_32) { unsigned long oldsp, newsp; /* Default to using normal stack */ - oldsp = get_clean_sp(regs, is_32); + oldsp = get_clean_sp(sp, is_32); /* Check for alt stack */ if ((ka->sa.sa_flags & SA_ONSTACK) && @@ -175,3 +176,38 @@ void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags) user_enter(); } + +unsigned long get_tm_stackpointer(struct pt_regs *regs) +{ + /* When in an active transaction that takes a signal, we need to be + * careful with the stack. It's possible that the stack has moved back + * up after the tbegin. The obvious case here is when the tbegin is + * called inside a function that returns before a tend. In this case, + * the stack is part of the checkpointed transactional memory state. + * If we write over this non transactionally or in suspend, we are in + * trouble because if we get a tm abort, the program counter and stack + * pointer will be back at the tbegin but our in memory stack won't be + * valid anymore. + * + * To avoid this, when taking a signal in an active transaction, we + * need to use the stack pointer from the checkpointed state, rather + * than the speculated state. This ensures that the signal context + * (written tm suspended) will be written below the stack required for + * the rollback. The transaction is aborted becuase of the treclaim, + * so any memory written between the tbegin and the signal will be + * rolled back anyway. + * + * For signals taken in non-TM or suspended mode, we use the + * normal/non-checkpointed stack pointer. + */ + +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + if (MSR_TM_ACTIVE(regs->msr)) { + tm_enable(); + tm_reclaim(¤t->thread, regs->msr, TM_CAUSE_SIGNAL); + if (MSR_TM_TRANSACTIONAL(regs->msr)) + return current->thread.ckpt_regs.gpr[1]; + } +#endif + return regs->gpr[1]; +} diff --git a/arch/powerpc/kernel/signal.h b/arch/powerpc/kernel/signal.h index ec84c90..c69b9ae 100644 --- a/arch/powerpc/kernel/signal.h +++ b/arch/powerpc/kernel/signal.h @@ -12,7 +12,7 @@ extern void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags); -extern void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, +extern void __user * get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size, int is_32); extern int handle_signal32(unsigned long sig, struct k_sigaction *ka, diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 95068bf..201385c 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -503,12 +503,6 @@ static int save_tm_user_regs(struct pt_regs *regs, { unsigned long msr = regs->msr; - /* tm_reclaim rolls back all reg states, updating thread.ckpt_regs, - * thread.transact_fpr[], thread.transact_vr[], etc. - */ - tm_enable(); - tm_reclaim(¤t->thread, msr, TM_CAUSE_SIGNAL); - /* Make sure floating point registers are stored in regs */ flush_fp_to_thread(current); @@ -965,7 +959,7 @@ int handle_rt_signal32(unsigned long sig, struct k_sigaction *ka, /* Set up Signal Frame */ /* Put a Real Time Context onto stack */ - rt_sf = get_sigframe(ka, regs, sizeof(*rt_sf), 1); + rt_sf = get_sigframe(ka, get_tm_stackpointer(regs), sizeof(*rt_sf), 1); addr = rt_sf; if (unlikely(rt_sf == NULL)) goto badframe; @@ -1403,7 +1397,7 @@ int handle_signal32(unsigned long sig, struct k_sigaction *ka, unsigned long tramp; /* Set up Signal Frame */ - frame = get_sigframe(ka, regs, sizeof(*frame), 1); + frame = get_sigframe(ka, get_tm_stackpointer(regs), sizeof(*frame), 1); if (unlikely(frame == NULL)) goto badframe; sc = (struct sigcontext __user *) &frame->sctx; diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index c179428..3459473 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -154,11 +154,12 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, * As above, but Transactional Memory is in use, so deliver sigcontexts * containing checkpointed and transactional register states. * - * To do this, we treclaim to gather both sets of registers and set up the - * 'normal' sigcontext registers with rolled-back register values such that a - * simple signal handler sees a correct checkpointed register state. - * If interested, a TM-aware sighandler can examine the transactional registers - * in the 2nd sigcontext to determine the real origin of the signal. + * To do this, we treclaim (done before entering here) to gather both sets of + * registers and set up the 'normal' sigcontext registers with rolled-back + * register values such that a simple signal handler sees a correct + * checkpointed register state. If interested, a TM-aware sighandler can + * examine the transactional registers in the 2nd sigcontext to determine the + * real origin of the signal. */ static long setup_tm_sigcontexts(struct sigcontext __user *sc, struct sigcontext __user *tm_sc, @@ -184,16 +185,6 @@ static long setup_tm_sigcontexts(struct sigcontext __user *sc, BUG_ON(!MSR_TM_ACTIVE(regs->msr)); - /* tm_reclaim rolls back all reg states, saving checkpointed (older) - * GPRs to thread.ckpt_regs and (if used) FPRs to (newer) - * thread.transact_fp and/or VRs to (newer) thread.transact_vr. - * THEN we save out FP/VRs, if necessary, to the checkpointed (older) - * thread.fr[]/vr[]s. The transactional (newer) GPRs are on the - * stack, in *regs. - */ - tm_enable(); - tm_reclaim(¤t->thread, msr, TM_CAUSE_SIGNAL); - flush_fp_to_thread(current); #ifdef CONFIG_ALTIVEC @@ -711,7 +702,7 @@ int handle_rt_signal64(int signr, struct k_sigaction *ka, siginfo_t *info, unsigned long newsp = 0; long err = 0; - frame = get_sigframe(ka, regs, sizeof(*frame), 0); + frame = get_sigframe(ka, get_tm_stackpointer(regs), sizeof(*frame), 0); if (unlikely(frame == NULL)) goto badframe; -- cgit v0.10.2 From e242114afff0a41550e174cd787cdbafd34625de Mon Sep 17 00:00:00 2001 From: chenhui zhao Date: Mon, 27 May 2013 21:59:43 +0000 Subject: powerpc/mpic: Fix irq distribution problem when MPIC_SINGLE_DEST_CPU For the mpic with a flag MPIC_SINGLE_DEST_CPU, only one bit should be set in interrupt destination registers. The code is applicable to 64-bit platforms as well as 32-bit. Signed-off-by: Zhao Chenhui Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 0a13ecb..3cc2f91 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -54,7 +54,7 @@ static DEFINE_RAW_SPINLOCK(mpic_lock); #ifdef CONFIG_PPC32 /* XXX for now */ #ifdef CONFIG_IRQ_ALL_CPUS -#define distribute_irqs (!(mpic->flags & MPIC_SINGLE_DEST_CPU)) +#define distribute_irqs (1) #else #define distribute_irqs (0) #endif @@ -1703,7 +1703,7 @@ void mpic_setup_this_cpu(void) * it differently, then we should make sure we also change the default * values of irq_desc[].affinity in irq.c. */ - if (distribute_irqs) { + if (distribute_irqs && !(mpic->flags & MPIC_SINGLE_DEST_CPU)) { for (i = 0; i < mpic->num_sources ; i++) mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), mpic_irq_read(i, MPIC_INFO(IRQ_DESTINATION)) | msk); -- cgit v0.10.2 From 2ac6f427ad837a69561160b282eff80d9f0c2466 Mon Sep 17 00:00:00 2001 From: Nishanth Aravamudan Date: Tue, 28 May 2013 10:39:50 +0000 Subject: powerpc/cputable: Fix oprofile_cpu_type on power8 Maynard informed me that neither the oprofile kernel module nor oprofile userspace has been updated to support that "legacy" oprofile module interface for power8, which is indicated by "ppc64/power8." This results in no samples. The solution is to default to the "timer" type, instead. The raw entry also should be updated, as "ppc64/ibm-compat-v1" indicates to oprofile userspace to use "compatibility events" which are obsolete in ISA 2.07. Signed-off-by: Nishanth Aravamudan Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index c60bbec..b8808bc 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -453,7 +453,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .oprofile_type = PPC_OPROFILE_POWER4, - .oprofile_cpu_type = "ppc64/ibm-compat-v1", + .oprofile_cpu_type = 0, .cpu_setup = __setup_cpu_power8, .cpu_restore = __restore_cpu_power8, .platform = "power8", @@ -506,7 +506,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .dcache_bsize = 128, .num_pmcs = 6, .pmc_type = PPC_PMC_IBM, - .oprofile_cpu_type = "ppc64/power8", + .oprofile_cpu_type = 0, .oprofile_type = PPC_OPROFILE_POWER4, .cpu_setup = __setup_cpu_power8, .cpu_restore = __restore_cpu_power8, -- cgit v0.10.2 From a515348fc69fd1d9e8ebd34a16f1026d7fe32048 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 29 May 2013 19:34:27 +0000 Subject: powerpc/pseries: Kill all prefetch streams on context switch On context switch, we should have no prefetch streams leak from one userspace process to another. This frees up prefetch resources for the next process. Based on patch from Milton Miller. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h index cea8496..2f1b6c5 100644 --- a/arch/powerpc/include/asm/ppc_asm.h +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -523,6 +523,17 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,946) #define PPC440EP_ERR42 #endif +/* The following stops all load and store data streams associated with stream + * ID (ie. streams created explicitly). The embedded and server mnemonics for + * dcbt are different so we use machine "power4" here explicitly. + */ +#define DCBT_STOP_ALL_STREAM_IDS(scratch) \ +.machine push ; \ +.machine "power4" ; \ + lis scratch,0x60000000@h; \ + dcbt r0,scratch,0b01010; \ +.machine pop + /* * toreal/fromreal/tophys/tovirt macros. 32-bit BookE makes them * keep the address intact to be compatible with code shared with diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 0e9095e..246b11c 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -501,6 +501,13 @@ BEGIN_FTR_SECTION ldarx r6,0,r1 END_FTR_SECTION_IFSET(CPU_FTR_STCX_CHECKS_ADDRESS) +#ifdef CONFIG_PPC_BOOK3S +/* Cancel all explict user streams as they will have no use after context + * switch and will stop the HW from creating streams itself + */ + DCBT_STOP_ALL_STREAM_IDS(r6) +#endif + addi r6,r4,-THREAD /* Convert THREAD to 'current' */ std r6,PACACURRENT(r13) /* Set new 'current' */ -- cgit v0.10.2 From 280a5ba22ca35575721d42e536176a3561f4ec43 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 29 May 2013 19:34:29 +0000 Subject: powerpc/pseries: Improve stream generation comments in copypage/user No code changes, just documenting what's happening a little better. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/lib/copypage_power7.S b/arch/powerpc/lib/copypage_power7.S index 0ef75bf..395c594 100644 --- a/arch/powerpc/lib/copypage_power7.S +++ b/arch/powerpc/lib/copypage_power7.S @@ -28,13 +28,14 @@ _GLOBAL(copypage_power7) * aligned we don't need to clear the bottom 7 bits of either * address. */ - ori r9,r3,1 /* stream=1 */ + ori r9,r3,1 /* stream=1 => to */ #ifdef CONFIG_PPC_64K_PAGES - lis r7,0x0E01 /* depth=7, units=512 */ + lis r7,0x0E01 /* depth=7 + * units/cachelines=512 */ #else lis r7,0x0E00 /* depth=7 */ - ori r7,r7,0x1000 /* units=32 */ + ori r7,r7,0x1000 /* units/cachelines=32 */ #endif ori r10,r7,1 /* stream=1 */ @@ -43,12 +44,14 @@ _GLOBAL(copypage_power7) .machine push .machine "power4" - dcbt r0,r4,0b01000 - dcbt r0,r7,0b01010 - dcbtst r0,r9,0b01000 - dcbtst r0,r10,0b01010 + /* setup read stream 0 */ + dcbt r0,r4,0b01000 /* addr from */ + dcbt r0,r7,0b01010 /* length and depth from */ + /* setup write stream 1 */ + dcbtst r0,r9,0b01000 /* addr to */ + dcbtst r0,r10,0b01010 /* length and depth to */ eieio - dcbt r0,r8,0b01010 /* GO */ + dcbt r0,r8,0b01010 /* all streams GO */ .machine pop #ifdef CONFIG_ALTIVEC diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S index 0d24ff1..d1f1179 100644 --- a/arch/powerpc/lib/copyuser_power7.S +++ b/arch/powerpc/lib/copyuser_power7.S @@ -318,12 +318,14 @@ err1; stb r0,0(r3) .machine push .machine "power4" - dcbt r0,r6,0b01000 - dcbt r0,r7,0b01010 - dcbtst r0,r9,0b01000 - dcbtst r0,r10,0b01010 + /* setup read stream 0 */ + dcbt r0,r6,0b01000 /* addr from */ + dcbt r0,r7,0b01010 /* length and depth from */ + /* setup write stream 1 */ + dcbtst r0,r9,0b01000 /* addr to */ + dcbtst r0,r10,0b01010 /* length and depth to */ eieio - dcbt r0,r8,0b01010 /* GO */ + dcbt r0,r8,0b01010 /* all streams GO */ .machine pop beq cr1,.Lunwind_stack_nonvmx_copy -- cgit v0.10.2 From 0608d692463598c1d6e826d9dd7283381b4f246c Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Fri, 31 May 2013 01:03:24 +0000 Subject: powerpc/mm: Always invalidate tlb on hpte invalidate and update If a hash bucket gets full, we "evict" a more/less random entry from it. When we do that we don't invalidate the TLB (hpte_remove) because we assume the old translation is still technically "valid". This implies that when we are invalidating or updating pte, even if HPTE entry is not valid we should do a tlb invalidate. This was a regression introduced by b1022fbd293564de91596b8775340cf41ad5214c Signed-off-by: Aneesh Kumar K.V Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c index 6a2aead..4c122c3 100644 --- a/arch/powerpc/mm/hash_native_64.c +++ b/arch/powerpc/mm/hash_native_64.c @@ -336,11 +336,18 @@ static long native_hpte_updatepp(unsigned long slot, unsigned long newpp, hpte_v = hptep->v; actual_psize = hpte_actual_psize(hptep, psize); + /* + * We need to invalidate the TLB always because hpte_remove doesn't do + * a tlb invalidate. If a hash bucket gets full, we "evict" a more/less + * random entry from it. When we do that we don't invalidate the TLB + * (hpte_remove) because we assume the old translation is still + * technically "valid". + */ if (actual_psize < 0) { - native_unlock_hpte(hptep); - return -1; + actual_psize = psize; + ret = -1; + goto err_out; } - /* Even if we miss, we need to invalidate the TLB */ if (!HPTE_V_COMPARE(hpte_v, want_v)) { DBG_LOW(" -> miss\n"); ret = -1; @@ -350,6 +357,7 @@ static long native_hpte_updatepp(unsigned long slot, unsigned long newpp, hptep->r = (hptep->r & ~(HPTE_R_PP | HPTE_R_N)) | (newpp & (HPTE_R_PP | HPTE_R_N | HPTE_R_C)); } +err_out: native_unlock_hpte(hptep); /* Ensure it is out of the tlb too. */ @@ -409,7 +417,7 @@ static void native_hpte_updateboltedpp(unsigned long newpp, unsigned long ea, hptep = htab_address + slot; actual_psize = hpte_actual_psize(hptep, psize); if (actual_psize < 0) - return; + actual_psize = psize; /* Update the HPTE */ hptep->r = (hptep->r & ~(HPTE_R_PP | HPTE_R_N)) | @@ -437,21 +445,27 @@ static void native_hpte_invalidate(unsigned long slot, unsigned long vpn, hpte_v = hptep->v; actual_psize = hpte_actual_psize(hptep, psize); + /* + * We need to invalidate the TLB always because hpte_remove doesn't do + * a tlb invalidate. If a hash bucket gets full, we "evict" a more/less + * random entry from it. When we do that we don't invalidate the TLB + * (hpte_remove) because we assume the old translation is still + * technically "valid". + */ if (actual_psize < 0) { + actual_psize = psize; native_unlock_hpte(hptep); - local_irq_restore(flags); - return; + goto err_out; } - /* Even if we miss, we need to invalidate the TLB */ if (!HPTE_V_COMPARE(hpte_v, want_v)) native_unlock_hpte(hptep); else /* Invalidate the hpte. NOTE: this also unlocks it */ hptep->v = 0; +err_out: /* Invalidate the TLB */ tlbie(vpn, psize, actual_psize, ssize, local); - local_irq_restore(flags); } -- cgit v0.10.2 From f7b3367774f92a688d39ed767f0ae9b93af7873a Mon Sep 17 00:00:00 2001 From: Priyanka Jain Date: Fri, 31 May 2013 01:20:02 +0000 Subject: powerpc/32bit:Store temporary result in r0 instead of r8 Commit a9c4e541ea9b22944da356f2a9258b4eddcc953b "powerpc/kprobe: Complete kprobe and migrate exception frame" introduced a regression: While returning from exception handling in case of PREEMPT enabled, _TIF_NEED_RESCHED bit is checked in TI_FLAGS (thread_info flag) of current task. Only if this bit is set, it should continue with the process of calling preempt_schedule_irq() to schedule highest priority task if available. Current code assumes that r8 contains TI_FLAGS and check this for _TIF_NEED_RESCHED, but as r8 is modified in the code which executes before this check, r8 no longer contains the expected TI_FLAGS information. As a result check for comparison with _TIF_NEED_RESCHED was failing even if NEED_RESCHED bit is set in the current thread_info flag. Due to this, preempt_schedule_irq() and in turn scheduler was not getting called even if highest priority task is ready for execution. So, store temporary results in r0 instead of r8 to prevent r8 from getting modified as subsequent code is dependent on its value. Signed-off-by: Priyanka Jain CC: [v3.7+] Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index d22e73e..22b45a4 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -849,7 +849,7 @@ resume_kernel: /* check current_thread_info, _TIF_EMULATE_STACK_STORE */ CURRENT_THREAD_INFO(r9, r1) lwz r8,TI_FLAGS(r9) - andis. r8,r8,_TIF_EMULATE_STACK_STORE@h + andis. r0,r8,_TIF_EMULATE_STACK_STORE@h beq+ 1f addi r8,r1,INT_FRAME_SIZE /* Get the kprobed function entry */ -- cgit v0.10.2 From 8e44ddc3f34d22c55f2977ac8b160609935d37ca Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 23 May 2013 15:42:21 +0000 Subject: powerpc/kvm/book3s: Add support for H_IPOLL and H_XIRR_X in XICS emulation This adds the remaining two hypercalls defined by PAPR for manipulating the XICS interrupt controller, H_IPOLL and H_XIRR_X. H_IPOLL returns information about the priority and pending interrupts for a virtual cpu, without changing any state. H_XIRR_X is like H_XIRR in that it reads and acknowledges the highest-priority pending interrupt, but it also returns the timestamp (timebase register value) from when the interrupt was first received by the hypervisor. Currently we just return the current time, since we don't do any software queueing of virtual interrupts inside the XICS emulation code. These hcalls are not currently used by Linux guests, but may be in future. Signed-off-by: Paul Mackerras Acked-by: Scott Wood Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h index cf4df8e..0c7f2bf 100644 --- a/arch/powerpc/include/asm/hvcall.h +++ b/arch/powerpc/include/asm/hvcall.h @@ -264,6 +264,7 @@ #define H_GET_MPP 0x2D4 #define H_HOME_NODE_ASSOCIATIVITY 0x2EC #define H_BEST_ENERGY 0x2F4 +#define H_XIRR_X 0x2FC #define H_RANDOM 0x300 #define H_COP 0x304 #define H_GET_MPP_X 0x314 diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 9de24f8..550f592 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -562,6 +562,8 @@ int kvmppc_pseries_do_hcall(struct kvm_vcpu *vcpu) case H_CPPR: case H_EOI: case H_IPI: + case H_IPOLL: + case H_XIRR_X: if (kvmppc_xics_enabled(vcpu)) { ret = kvmppc_xics_hcall(vcpu, req); break; diff --git a/arch/powerpc/kvm/book3s_pr_papr.c b/arch/powerpc/kvm/book3s_pr_papr.c index b24309c..da0e0bc 100644 --- a/arch/powerpc/kvm/book3s_pr_papr.c +++ b/arch/powerpc/kvm/book3s_pr_papr.c @@ -257,6 +257,8 @@ int kvmppc_h_pr(struct kvm_vcpu *vcpu, unsigned long cmd) case H_CPPR: case H_EOI: case H_IPI: + case H_IPOLL: + case H_XIRR_X: if (kvmppc_xics_enabled(vcpu)) return kvmppc_h_pr_xics_hcall(vcpu, cmd); break; diff --git a/arch/powerpc/kvm/book3s_xics.c b/arch/powerpc/kvm/book3s_xics.c index f7a1037..94c1dd4 100644 --- a/arch/powerpc/kvm/book3s_xics.c +++ b/arch/powerpc/kvm/book3s_xics.c @@ -650,6 +650,23 @@ static noinline int kvmppc_h_ipi(struct kvm_vcpu *vcpu, unsigned long server, return H_SUCCESS; } +static int kvmppc_h_ipoll(struct kvm_vcpu *vcpu, unsigned long server) +{ + union kvmppc_icp_state state; + struct kvmppc_icp *icp; + + icp = vcpu->arch.icp; + if (icp->server_num != server) { + icp = kvmppc_xics_find_server(vcpu->kvm, server); + if (!icp) + return H_PARAMETER; + } + state = ACCESS_ONCE(icp->state); + kvmppc_set_gpr(vcpu, 4, ((u32)state.cppr << 24) | state.xisr); + kvmppc_set_gpr(vcpu, 5, state.mfrr); + return H_SUCCESS; +} + static noinline void kvmppc_h_cppr(struct kvm_vcpu *vcpu, unsigned long cppr) { union kvmppc_icp_state old_state, new_state; @@ -787,6 +804,18 @@ int kvmppc_xics_hcall(struct kvm_vcpu *vcpu, u32 req) if (!xics || !vcpu->arch.icp) return H_HARDWARE; + /* These requests don't have real-mode implementations at present */ + switch (req) { + case H_XIRR_X: + res = kvmppc_h_xirr(vcpu); + kvmppc_set_gpr(vcpu, 4, res); + kvmppc_set_gpr(vcpu, 5, get_tb()); + return rc; + case H_IPOLL: + rc = kvmppc_h_ipoll(vcpu, kvmppc_get_gpr(vcpu, 4)); + return rc; + } + /* Check for real mode returning too hard */ if (xics->real_mode) return kvmppc_xics_rm_complete(vcpu, req); -- cgit v0.10.2 From f274ef8747d3be649bba8708696fb31cb00fa75a Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Tue, 21 May 2013 09:32:48 +0000 Subject: powerpc/pseries: Always enable CONFIG_HOTPLUG_CPU on PSERIES SMP MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Adam Lackorzynski reported the following build failure on !CONFIG_HOTPLUG_CPU configuration: CC arch/powerpc/kernel/rtas.o arch/powerpc/kernel/rtas.c: In function ‘rtas_cpu_state_change_mask’: arch/powerpc/kernel/rtas.c:843:4: error: implicit declaration of function ‘cpu_down’ [-Werror=implicit-function-declaration] cc1: all warnings being treated as errors make[1]: *** [arch/powerpc/kernel/rtas.o] Error 1 make: *** [arch/powerpc/kernel] Error 2 The build fails because cpu_down() is defined only under CONFIG_HOTPLUG_CPU. Looking further, the mobility code in pseries is one of the call-sites which uses rtas_ibm_suspend_me(), which in turn calls rtas_cpu_state_change_mask(). And the mobility code is unconditionally compiled-in (it does not fall under any Kconfig option). And commit 120496ac (powerpc: Bring all threads online prior to migration/hibernation) which introduced this build regression is critical for the proper functioning of the migration code. So it appears that the only solution to this problem is to enable CONFIG_HOTPLUG_CPU if SMP is enabled on PPC_PSERIES platforms. So make that change in the Kconfig. Reported-by: Adam Lackorzynski Cc: stable@vger.kernel.org Signed-off-by: Srivatsa S. Bhat Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index 023b288..4459eff 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -19,6 +19,8 @@ config PPC_PSERIES select ZLIB_DEFLATE select PPC_DOORBELL select HAVE_CONTEXT_TRACKING + select HOTPLUG if SMP + select HOTPLUG_CPU if SMP default y config PPC_SPLPAR -- cgit v0.10.2 From 279838960484fa22d903086eea743a6b6700647d Mon Sep 17 00:00:00 2001 From: Kevin Hao Date: Thu, 16 May 2013 20:58:41 +0000 Subject: powerpc/pci: Remove the stale comments of pci_process_bridge_OF_ranges These comments already don't apply to the current code. So just remove them. Signed-off-by: Kevin Hao Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index e9acf50..8acd7c9 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -657,15 +657,6 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar, * ranges. However, some machines (thanks Apple !) tend to split their * space into lots of small contiguous ranges. So we have to coalesce. * - * - We can only cope with all memory ranges having the same offset - * between CPU addresses and PCI addresses. Unfortunately, some bridges - * are setup for a large 1:1 mapping along with a small "window" which - * maps PCI address 0 to some arbitrary high address of the CPU space in - * order to give access to the ISA memory hole. - * The way out of here that I've chosen for now is to always set the - * offset based on the first resource found, then override it if we - * have a different offset and the previous was set by an ISA hole. - * * - Some busses have IO space not starting at 0, which causes trouble with * the way we do our IO resource renumbering. The code somewhat deals with * it for 64 bits but I would expect problems on 32 bits. -- cgit v0.10.2 From 858957ab1e3a7ee29ed40309bdf0f1b7bcf5bf30 Mon Sep 17 00:00:00 2001 From: Kevin Hao Date: Thu, 16 May 2013 20:58:42 +0000 Subject: powerpc/pci: Remove the unused variables in pci_process_bridge_OF_ranges The codes which ever used these two variables have gone. Throw away them too. Signed-off-by: Kevin Hao Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 8acd7c9..7f2273c 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -671,10 +671,9 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose, int rlen; int pna = of_n_addr_cells(dev); int np = pna + 5; - int memno = 0, isa_hole = -1; + int memno = 0; u32 pci_space; unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size; - unsigned long long isa_mb = 0; struct resource *res; printk(KERN_INFO "PCI host bridge %s %s ranges:\n", @@ -768,8 +767,6 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose, } /* Handles ISA memory hole space here */ if (pci_addr == 0) { - isa_mb = cpu_addr; - isa_hole = memno; if (primary || isa_mem_base == 0) isa_mem_base = cpu_addr; hose->isa_mem_phys = cpu_addr; -- cgit v0.10.2 From cbda6aa10bd2d97e38f4d26a03a0b2183ad580ba Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 15 May 2013 20:19:30 +0000 Subject: powerpc/perf: Revert to original NO_SIPR logic This is a revert and then some of commit 860aad7 "Add regs_no_sipr()". This workaround was only needed on early chip versions. As before NO_SIPR becomes a static flag of the PMU struct. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index 426180b..b2f873b 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -110,7 +110,7 @@ static inline void power_pmu_bhrb_read(struct cpu_hw_events *cpuhw) {} static bool regs_use_siar(struct pt_regs *regs) { - return !!(regs->result & 1); + return !!regs->result; } /* @@ -181,11 +181,6 @@ static bool regs_sipr(struct pt_regs *regs) return !!(regs->dsisr & sipr); } -static bool regs_no_sipr(struct pt_regs *regs) -{ - return !!(regs->result & 2); -} - static inline u32 perf_flags_from_msr(struct pt_regs *regs) { if (regs->msr & MSR_PR) @@ -208,7 +203,7 @@ static inline u32 perf_get_misc_flags(struct pt_regs *regs) * SIAR which should give slightly more reliable * results */ - if (regs_no_sipr(regs)) { + if (ppmu->flags & PPMU_NO_SIPR) { unsigned long siar = mfspr(SPRN_SIAR); if (siar >= PAGE_OFFSET) return PERF_RECORD_MISC_KERNEL; @@ -239,22 +234,9 @@ static inline void perf_read_regs(struct pt_regs *regs) int use_siar; regs->dsisr = mmcra; - regs->result = 0; - - if (ppmu->flags & PPMU_NO_SIPR) - regs->result |= 2; - - /* - * On power8 if we're in random sampling mode, the SIER is updated. - * If we're in continuous sampling mode, we don't have SIPR. - */ - if (ppmu->flags & PPMU_HAS_SIER) { - if (marked) - regs->dar = mfspr(SPRN_SIER); - else - regs->result |= 2; - } + if (ppmu->flags & PPMU_HAS_SIER) + regs->dar = mfspr(SPRN_SIER); /* * If this isn't a PMU exception (eg a software event) the SIAR is @@ -279,12 +261,12 @@ static inline void perf_read_regs(struct pt_regs *regs) use_siar = 1; else if ((ppmu->flags & PPMU_NO_CONT_SAMPLING)) use_siar = 0; - else if (!regs_no_sipr(regs) && regs_sipr(regs)) + else if (!(ppmu->flags & PPMU_NO_SIPR) && regs_sipr(regs)) use_siar = 0; else use_siar = 1; - regs->result |= use_siar; + regs->result = use_siar; } /* -- cgit v0.10.2 From 58a032c3b106adcd2b83b7e631de3b79f238cdd2 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 15 May 2013 20:19:31 +0000 Subject: powerpc/perf: Add missing SIER support Commit 8f61aa3 "Add support for SIER" missed updates to siar_valid() and perf_get_data_addr(). In both cases we need to check the SIER instead of mmcra. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index b2f873b..845c867 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -136,22 +136,30 @@ static inline unsigned long perf_ip_adjust(struct pt_regs *regs) * If we're not doing instruction sampling, give them the SDAR * (sampled data address). If we are doing instruction sampling, then * only give them the SDAR if it corresponds to the instruction - * pointed to by SIAR; this is indicated by the [POWER6_]MMCRA_SDSYNC or - * the [POWER7P_]MMCRA_SDAR_VALID bit in MMCRA. + * pointed to by SIAR; this is indicated by the [POWER6_]MMCRA_SDSYNC, the + * [POWER7P_]MMCRA_SDAR_VALID bit in MMCRA, or the SDAR_VALID bit in SIER. */ static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp) { unsigned long mmcra = regs->dsisr; - unsigned long sdsync; + bool sdar_valid; - if (ppmu->flags & PPMU_SIAR_VALID) - sdsync = POWER7P_MMCRA_SDAR_VALID; - else if (ppmu->flags & PPMU_ALT_SIPR) - sdsync = POWER6_MMCRA_SDSYNC; - else - sdsync = MMCRA_SDSYNC; + if (ppmu->flags & PPMU_HAS_SIER) + sdar_valid = regs->dar & SIER_SDAR_VALID; + else { + unsigned long sdsync; + + if (ppmu->flags & PPMU_SIAR_VALID) + sdsync = POWER7P_MMCRA_SDAR_VALID; + else if (ppmu->flags & PPMU_ALT_SIPR) + sdsync = POWER6_MMCRA_SDSYNC; + else + sdsync = MMCRA_SDSYNC; - if (!(mmcra & MMCRA_SAMPLE_ENABLE) || (mmcra & sdsync)) + sdar_valid = mmcra & sdsync; + } + + if (!(mmcra & MMCRA_SAMPLE_ENABLE) || sdar_valid) *addrp = mfspr(SPRN_SDAR); } @@ -290,8 +298,13 @@ static inline int siar_valid(struct pt_regs *regs) unsigned long mmcra = regs->dsisr; int marked = mmcra & MMCRA_SAMPLE_ENABLE; - if ((ppmu->flags & PPMU_SIAR_VALID) && marked) - return mmcra & POWER7P_MMCRA_SIAR_VALID; + if (marked) { + if (ppmu->flags & PPMU_HAS_SIER) + return regs->dar & SIER_SIAR_VALID; + + if (ppmu->flags & PPMU_SIAR_VALID) + return mmcra & POWER7P_MMCRA_SIAR_VALID; + } return 1; } -- cgit v0.10.2 From fda3f402f446e82204266f4a3bf26912f2d55e75 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Fri, 31 May 2013 05:37:57 +0000 Subject: snmp6: remove IPSTATS_MIB_CSUMERRORS This stat is not relevant in IPv6, there is no checksum in IPv6 header. Just leave a comment to explain the hole. Signed-off-by: Nicolas Dichtel Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c index f3c1ff4..51c3285 100644 --- a/net/ipv6/proc.c +++ b/net/ipv6/proc.c @@ -90,7 +90,7 @@ static const struct snmp_mib snmp6_ipstats_list[] = { SNMP_MIB_ITEM("Ip6OutMcastOctets", IPSTATS_MIB_OUTMCASTOCTETS), SNMP_MIB_ITEM("Ip6InBcastOctets", IPSTATS_MIB_INBCASTOCTETS), SNMP_MIB_ITEM("Ip6OutBcastOctets", IPSTATS_MIB_OUTBCASTOCTETS), - SNMP_MIB_ITEM("InCsumErrors", IPSTATS_MIB_CSUMERRORS), + /* IPSTATS_MIB_CSUMERRORS is not relevant in IPv6 (no checksum) */ SNMP_MIB_SENTINEL }; -- cgit v0.10.2 From badec11b645e21acbc2411d7759e3efa559af443 Mon Sep 17 00:00:00 2001 From: Will Schmidt Date: Mon, 20 May 2013 05:04:18 +0000 Subject: powerpc/cputable: Fix typo on P7+ cputable entry Fix a typo in setting COMMON_USER2_POWER7 bits to .cpu_user_features2 cpu specs table. Signed-off-by: Will Schmidt Acked-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index b8808bc..1f0937d 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -482,7 +482,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_name = "POWER7+ (raw)", .cpu_features = CPU_FTRS_POWER7, .cpu_user_features = COMMON_USER_POWER7, - .cpu_user_features = COMMON_USER2_POWER7, + .cpu_user_features2 = COMMON_USER2_POWER7, .mmu_features = MMU_FTRS_POWER7, .icache_bsize = 128, .dcache_bsize = 128, -- cgit v0.10.2 From 9747ba6636be8a7e8ba83a1fb231d061ca318e4f Mon Sep 17 00:00:00 2001 From: Jay Vosburgh Date: Fri, 31 May 2013 11:57:26 +0000 Subject: net/core: __hw_addr_create_ex does not initialize sync_cnt The sync_cnt field is not being initialized, which can result in arbitrary values in the field. Fixed by initializing it to zero. Signed-off-by: Jay Vosburgh Reviewed-by: Vlad Yasevich Tested-by: Shawn Bohrer Signed-off-by: David S. Miller diff --git a/net/core/dev_addr_lists.c b/net/core/dev_addr_lists.c index c013f38..1f919d9 100644 --- a/net/core/dev_addr_lists.c +++ b/net/core/dev_addr_lists.c @@ -39,6 +39,7 @@ static int __hw_addr_create_ex(struct netdev_hw_addr_list *list, ha->refcount = 1; ha->global_use = global; ha->synced = sync; + ha->sync_cnt = 0; list_add_tail_rcu(&ha->list, &list->list); list->count++; -- cgit v0.10.2 From 60ba834c2fb65f2fafee47e03c258fac579d0591 Mon Sep 17 00:00:00 2001 From: Jay Vosburgh Date: Fri, 31 May 2013 11:57:27 +0000 Subject: net/core: __hw_addr_unsync_one "from" address not marked synced When an address is added to a subordinate interface (the "to" list), the address entry in the "from" list is not marked "synced" as the entry added to the "to" list is. When performing the unsync operation (e.g., dev_mc_unsync), __hw_addr_unsync_one calls __hw_addr_del_entry with the "synced" parameter set to true for the case when the address reference is being released from the "from" list. This causes a test inside to fail, with the result being that the reference count on the "from" address is not properly decremeted and the address on the "from" list will never be freed. Correct this by having __hw_addr_unsync_one call the __hw_addr_del_entry function with the "sync" flag set to false for the "remove from the from list" case. Signed-off-by: Jay Vosburgh Reviewed-by: Vlad Yasevich Tested-by: Shawn Bohrer Signed-off-by: David S. Miller diff --git a/net/core/dev_addr_lists.c b/net/core/dev_addr_lists.c index 1f919d9..c858e81 100644 --- a/net/core/dev_addr_lists.c +++ b/net/core/dev_addr_lists.c @@ -160,7 +160,8 @@ static void __hw_addr_unsync_one(struct netdev_hw_addr_list *to_list, if (err) return; ha->sync_cnt--; - __hw_addr_del_entry(from_list, ha, false, true); + /* address on from list is not marked synced */ + __hw_addr_del_entry(from_list, ha, false, false); } static int __hw_addr_sync_multiple(struct netdev_hw_addr_list *to_list, -- cgit v0.10.2 From 29ca2f8fcc721517b83d0a560c47cee2dde827a6 Mon Sep 17 00:00:00 2001 From: Jay Vosburgh Date: Fri, 31 May 2013 11:57:28 +0000 Subject: net/core: __hw_addr_sync_one / _multiple broken Currently, __hw_addr_sync_one is called in a loop by __hw_addr_sync_multiple to sync each of a "from" device's hw addresses to a "to" device. __hw_addr_sync_one calls __hw_addr_add_ex to attempt to add each address. __hw_addr_add_ex is called with global=false, and sync=true. __hw_addr_add_ex checks to see if the new address matches an address already on the list. If so, it tests global and sync. In this case, sync=true, and it then checks if the address is already synced, and if so, returns 0. This 0 return causes __hw_addr_sync_one to increment the sync_cnt and refcount for the "from" list's address entry, even though the address is already synced and has a reference and sync_cnt. This will cause the sync_cnt and refcount to increment without bound every time an addresses is added to the "from" device and synced to the "to" device. The fix here has two parts: First, when __hw_addr_add_ex finds the address already exists and is synced, return -EEXIST instead of 0. Second, __hw_addr_sync_one checks the error return for -EEXIST, and if so, it (a) does not add a refcount/sync_cnt, and (b) returns 0 itself so that __hw_addr_sync_multiple will not return an error. Signed-off-by: Jay Vosburgh Reviewed-by: Vlad Yasevich Tested-by: Shawn Bohrer Signed-off-by: David S. Miller diff --git a/net/core/dev_addr_lists.c b/net/core/dev_addr_lists.c index c858e81..8e2c2ef 100644 --- a/net/core/dev_addr_lists.c +++ b/net/core/dev_addr_lists.c @@ -67,7 +67,7 @@ static int __hw_addr_add_ex(struct netdev_hw_addr_list *list, } if (sync) { if (ha->synced) - return 0; + return -EEXIST; else ha->synced = true; } @@ -140,10 +140,13 @@ static int __hw_addr_sync_one(struct netdev_hw_addr_list *to_list, err = __hw_addr_add_ex(to_list, ha->addr, addr_len, ha->type, false, true); - if (err) + if (err && err != -EEXIST) return err; - ha->sync_cnt++; - ha->refcount++; + + if (!err) { + ha->sync_cnt++; + ha->refcount++; + } return 0; } -- cgit v0.10.2 From b190a50875b95e58ebe2b00ed3bf7f1d44961471 Mon Sep 17 00:00:00 2001 From: Jay Vosburgh Date: Fri, 31 May 2013 11:57:29 +0000 Subject: net/core: dev_mc_sync_multiple calls wrong helper The dev_mc_sync_multiple function is currently calling __hw_addr_sync, and not __hw_addr_sync_multiple. This will result in addresses only being synced to the first device from the set. Corrected by calling the _multiple variant. Signed-off-by: Jay Vosburgh Reviewed-by: Vlad Yasevich Tested-by: Shawn Bohrer Signed-off-by: David S. Miller diff --git a/net/core/dev_addr_lists.c b/net/core/dev_addr_lists.c index 8e2c2ef..6cda4e2 100644 --- a/net/core/dev_addr_lists.c +++ b/net/core/dev_addr_lists.c @@ -801,7 +801,7 @@ int dev_mc_sync_multiple(struct net_device *to, struct net_device *from) return -EINVAL; netif_addr_lock_nested(to); - err = __hw_addr_sync(&to->mc, &from->mc, to->addr_len); + err = __hw_addr_sync_multiple(&to->mc, &from->mc, to->addr_len); if (!err) __dev_set_rx_mode(to); netif_addr_unlock(to); -- cgit v0.10.2 From 1e2bd517c108816220f262d7954b697af03b5f9c Mon Sep 17 00:00:00 2001 From: Pravin B Shelar Date: Thu, 30 May 2013 06:45:27 +0000 Subject: udp6: Fix udp fragmentation for tunnel traffic. udp6 over GRE tunnel does not work after to GRE tso changes. GRE tso handler passes inner packet but keeps track of outer header start in SKB_GSO_CB(skb)->mac_offset. udp6 fragment need to take care of outer header, which start at the mac_offset, while adding fragment header. This bug is introduced by commit 68c3316311 (GRE: Add TCP segmentation offload for GRE). Reported-by: Dmitry Kravkov Signed-off-by: Pravin B Shelar Tested-by: Dmitry Kravkov Signed-off-by: David S. Miller diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 2e0ced1..9c676eae 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -2852,6 +2852,21 @@ static inline int skb_tnl_header_len(const struct sk_buff *inner_skb) SKB_GSO_CB(inner_skb)->mac_offset; } +static inline int gso_pskb_expand_head(struct sk_buff *skb, int extra) +{ + int new_headroom, headroom; + int ret; + + headroom = skb_headroom(skb); + ret = pskb_expand_head(skb, extra, 0, GFP_ATOMIC); + if (ret) + return ret; + + new_headroom = skb_headroom(skb); + SKB_GSO_CB(skb)->mac_offset += (new_headroom - headroom); + return 0; +} + static inline bool skb_is_gso(const struct sk_buff *skb) { return skb_shinfo(skb)->gso_size; diff --git a/net/ipv6/udp_offload.c b/net/ipv6/udp_offload.c index 3bb3a89..d3cfaf9 100644 --- a/net/ipv6/udp_offload.c +++ b/net/ipv6/udp_offload.c @@ -46,11 +46,12 @@ static struct sk_buff *udp6_ufo_fragment(struct sk_buff *skb, unsigned int mss; unsigned int unfrag_ip6hlen, unfrag_len; struct frag_hdr *fptr; - u8 *mac_start, *prevhdr; + u8 *packet_start, *prevhdr; u8 nexthdr; u8 frag_hdr_sz = sizeof(struct frag_hdr); int offset; __wsum csum; + int tnl_hlen; mss = skb_shinfo(skb)->gso_size; if (unlikely(skb->len <= mss)) @@ -83,9 +84,11 @@ static struct sk_buff *udp6_ufo_fragment(struct sk_buff *skb, skb->ip_summed = CHECKSUM_NONE; /* Check if there is enough headroom to insert fragment header. */ - if ((skb_mac_header(skb) < skb->head + frag_hdr_sz) && - pskb_expand_head(skb, frag_hdr_sz, 0, GFP_ATOMIC)) - goto out; + tnl_hlen = skb_tnl_header_len(skb); + if (skb_headroom(skb) < (tnl_hlen + frag_hdr_sz)) { + if (gso_pskb_expand_head(skb, tnl_hlen + frag_hdr_sz)) + goto out; + } /* Find the unfragmentable header and shift it left by frag_hdr_sz * bytes to insert fragment header. @@ -93,11 +96,12 @@ static struct sk_buff *udp6_ufo_fragment(struct sk_buff *skb, unfrag_ip6hlen = ip6_find_1stfragopt(skb, &prevhdr); nexthdr = *prevhdr; *prevhdr = NEXTHDR_FRAGMENT; - unfrag_len = skb_network_header(skb) - skb_mac_header(skb) + - unfrag_ip6hlen; - mac_start = skb_mac_header(skb); - memmove(mac_start-frag_hdr_sz, mac_start, unfrag_len); + unfrag_len = (skb_network_header(skb) - skb_mac_header(skb)) + + unfrag_ip6hlen + tnl_hlen; + packet_start = (u8 *) skb->head + SKB_GSO_CB(skb)->mac_offset; + memmove(packet_start-frag_hdr_sz, packet_start, unfrag_len); + SKB_GSO_CB(skb)->mac_offset -= frag_hdr_sz; skb->mac_header -= frag_hdr_sz; skb->network_header -= frag_hdr_sz; -- cgit v0.10.2 From e4c1721642bbd42d8142f4811cde0588c28db51d Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Wed, 29 May 2013 07:36:25 +0000 Subject: xfrm: force a garbage collection after deleting a policy In some cases after deleting a policy from the SPD the policy would remain in the dst/flow/route cache for an extended period of time which caused problems for SELinux as its dynamic network access controls key off of the number of XFRM policy and state entries. This patch corrects this problem by forcing a XFRM garbage collection whenever a policy is sucessfully removed. Reported-by: Ondrej Moris Signed-off-by: Paul Moore Signed-off-by: David S. Miller diff --git a/include/net/xfrm.h b/include/net/xfrm.h index ae16531..94ce082 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -1160,6 +1160,8 @@ static inline void xfrm_sk_free_policy(struct sock *sk) } } +extern void xfrm_garbage_collect(struct net *net); + #else static inline void xfrm_sk_free_policy(struct sock *sk) {} @@ -1194,6 +1196,9 @@ static inline int xfrm6_policy_check_reverse(struct sock *sk, int dir, { return 1; } +static inline void xfrm_garbage_collect(struct net *net) +{ +} #endif static __inline__ diff --git a/net/key/af_key.c b/net/key/af_key.c index 5b1e5af..c5fbd75 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -2366,6 +2366,8 @@ static int pfkey_spddelete(struct sock *sk, struct sk_buff *skb, const struct sa out: xfrm_pol_put(xp); + if (err == 0) + xfrm_garbage_collect(net); return err; } @@ -2615,6 +2617,8 @@ static int pfkey_spdget(struct sock *sk, struct sk_buff *skb, const struct sadb_ out: xfrm_pol_put(xp); + if (delete && err == 0) + xfrm_garbage_collect(net); return err; } diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index 23cea0f..ea970b8 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -2557,11 +2557,12 @@ static void __xfrm_garbage_collect(struct net *net) } } -static void xfrm_garbage_collect(struct net *net) +void xfrm_garbage_collect(struct net *net) { flow_cache_flush(); __xfrm_garbage_collect(net); } +EXPORT_SYMBOL(xfrm_garbage_collect); static void xfrm_garbage_collect_deferred(struct net *net) { diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index aa77874..3f565e4 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -1681,6 +1681,8 @@ static int xfrm_get_policy(struct sk_buff *skb, struct nlmsghdr *nlh, out: xfrm_pol_put(xp); + if (delete && err == 0) + xfrm_garbage_collect(net); return err; } -- cgit v0.10.2 From e4e8536f65b51ce91c30588b0925872bdfc60d03 Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Wed, 29 May 2013 07:36:32 +0000 Subject: selinux: fix the labeled xfrm/IPsec reference count handling The SELinux labeled IPsec code was improperly handling its reference counting, dropping a reference on a delete operation instead of on a free/release operation. Reported-by: Ondrej Moris Signed-off-by: Paul Moore Signed-off-by: David S. Miller diff --git a/security/selinux/xfrm.c b/security/selinux/xfrm.c index 8ab2951..d030818 100644 --- a/security/selinux/xfrm.c +++ b/security/selinux/xfrm.c @@ -316,6 +316,7 @@ int selinux_xfrm_policy_clone(struct xfrm_sec_ctx *old_ctx, memcpy(new_ctx, old_ctx, sizeof(*new_ctx)); memcpy(new_ctx->ctx_str, old_ctx->ctx_str, new_ctx->ctx_len); + atomic_inc(&selinux_xfrm_refcount); *new_ctxp = new_ctx; } return 0; @@ -326,6 +327,7 @@ int selinux_xfrm_policy_clone(struct xfrm_sec_ctx *old_ctx, */ void selinux_xfrm_policy_free(struct xfrm_sec_ctx *ctx) { + atomic_dec(&selinux_xfrm_refcount); kfree(ctx); } @@ -335,17 +337,13 @@ void selinux_xfrm_policy_free(struct xfrm_sec_ctx *ctx) int selinux_xfrm_policy_delete(struct xfrm_sec_ctx *ctx) { const struct task_security_struct *tsec = current_security(); - int rc = 0; - if (ctx) { - rc = avc_has_perm(tsec->sid, ctx->ctx_sid, - SECCLASS_ASSOCIATION, - ASSOCIATION__SETCONTEXT, NULL); - if (rc == 0) - atomic_dec(&selinux_xfrm_refcount); - } + if (!ctx) + return 0; - return rc; + return avc_has_perm(tsec->sid, ctx->ctx_sid, + SECCLASS_ASSOCIATION, ASSOCIATION__SETCONTEXT, + NULL); } /* @@ -370,8 +368,8 @@ int selinux_xfrm_state_alloc(struct xfrm_state *x, struct xfrm_user_sec_ctx *uct */ void selinux_xfrm_state_free(struct xfrm_state *x) { - struct xfrm_sec_ctx *ctx = x->security; - kfree(ctx); + atomic_dec(&selinux_xfrm_refcount); + kfree(x->security); } /* @@ -381,17 +379,13 @@ int selinux_xfrm_state_delete(struct xfrm_state *x) { const struct task_security_struct *tsec = current_security(); struct xfrm_sec_ctx *ctx = x->security; - int rc = 0; - if (ctx) { - rc = avc_has_perm(tsec->sid, ctx->ctx_sid, - SECCLASS_ASSOCIATION, - ASSOCIATION__SETCONTEXT, NULL); - if (rc == 0) - atomic_dec(&selinux_xfrm_refcount); - } + if (!ctx) + return 0; - return rc; + return avc_has_perm(tsec->sid, ctx->ctx_sid, + SECCLASS_ASSOCIATION, ASSOCIATION__SETCONTEXT, + NULL); } /* -- cgit v0.10.2 From 6d7581e62f8be462440d7b22c6361f7c9fa4902b Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Wed, 29 May 2013 05:02:56 +0000 Subject: list: introduce list_first_entry_or_null non-rcu variant of list_first_or_null_rcu Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/include/linux/list.h b/include/linux/list.h index 6a1f8df..b83e565 100644 --- a/include/linux/list.h +++ b/include/linux/list.h @@ -362,6 +362,17 @@ static inline void list_splice_tail_init(struct list_head *list, list_entry((ptr)->next, type, member) /** + * list_first_entry_or_null - get the first element from a list + * @ptr: the list head to take the element from. + * @type: the type of the struct this is embedded in. + * @member: the name of the list_struct within the struct. + * + * Note that if the list is empty, it returns NULL. + */ +#define list_first_entry_or_null(ptr, type, member) \ + (!list_empty(ptr) ? list_first_entry(ptr, type, member) : NULL) + +/** * list_for_each - iterate over a list * @pos: the &struct list_head to use as a loop cursor. * @head: the head for your list. -- cgit v0.10.2 From 3f3e7ce4ff87c8ea69acaa7700699fb26baa2914 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Wed, 29 May 2013 05:02:57 +0000 Subject: team: fix port list dump for big number of ports In case the port list dump does not fit into one skb currently the dump would start over again. Fix this by continue from the last dumped port. Introduced by commit d90f889e9c (team: handle sending port list in the same way option list is sent) Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 7c43261..d016a76 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -2374,7 +2374,8 @@ static int team_nl_send_port_list_get(struct team *team, u32 portid, u32 seq, bool incomplete; int i; - port = list_first_entry(&team->port_list, struct team_port, list); + port = list_first_entry_or_null(&team->port_list, + struct team_port, list); start_again: err = __send_and_alloc_skb(&skb, team, portid, send_func); @@ -2402,8 +2403,8 @@ start_again: err = team_nl_fill_one_port_get(skb, one_port); if (err) goto errout; - } else { - list_for_each_entry(port, &team->port_list, list) { + } else if (port) { + list_for_each_entry_from(port, &team->port_list, list) { err = team_nl_fill_one_port_get(skb, port); if (err) { if (err == -EMSGSIZE) { -- cgit v0.10.2 From c802db1164f28e62c6a43132b8d290cb8113f2ac Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Tue, 28 May 2013 06:15:56 +0000 Subject: hyperv: Fix vlan_proto setting in netvsc_recv_callback() Since the recent addition of 8021AD, we need to set the new field vlan_proto in sk_buff. Otherwise, it will trigger BUG() call in vlan_proto_idx(). This patch fixes the problem. Signed-off-by: Haiyang Zhang Reviewed-by: K. Y. Srinivasan Signed-off-by: David S. Miller diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index 088c554..ab2307b 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include @@ -284,7 +285,7 @@ int netvsc_recv_callback(struct hv_device *device_obj, skb->protocol = eth_type_trans(skb, net); skb->ip_summed = CHECKSUM_NONE; - skb->vlan_tci = packet->vlan_tci; + __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), packet->vlan_tci); net->stats.rx_packets++; net->stats.rx_bytes += packet->total_data_buflen; -- cgit v0.10.2 From 3f108de96ba449a8df3d7e3c053bf890fee2cb95 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Mon, 27 May 2013 04:57:09 +0000 Subject: parisc: memory overflow, 'name' length is too short for using 'path.bc[i]' can be asigned by PCI_SLOT() which can '> 10', so sizeof(6 * "%u:" + "%u" + '\0') may be 21. Since 'name' length is 20, it may be memory overflow. And 'path.bc[i]' is 'unsigned char' for printing, we can be sure the max length of 'name' must be less than 28. So simplify thinking, we can use 28 instead of 20 directly, and do not think of whether 'patchc.bc[i]' can '> 100'. Signed-off-by: Chen Gang Signed-off-by: Helge Deller diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c index 5709c5e..14285ca 100644 --- a/arch/parisc/kernel/drivers.c +++ b/arch/parisc/kernel/drivers.c @@ -394,7 +394,7 @@ EXPORT_SYMBOL(print_pci_hwpath); static void setup_bus_id(struct parisc_device *padev) { struct hardware_path path; - char name[20]; + char name[28]; char *output = name; int i; -- cgit v0.10.2 From ae249b5fa27f9fba25aa59664d4338efc2dd2394 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Tue, 28 May 2013 20:35:54 +0000 Subject: parisc: fix kernel BUG at arch/parisc/include/asm/mmzone.h:50 With CONFIG_DISCONTIGMEM=y and multiple physical memory areas, cat /proc/kpageflags triggers this kernel bug: kernel BUG at arch/parisc/include/asm/mmzone.h:50! CPU: 2 PID: 7848 Comm: cat Tainted: G D W 3.10.0-rc3-64bit #44 IAOQ[0]: kpageflags_read0x128/0x238 IAOQ[1]: kpageflags_read0x12c/0x238 RP(r2): proc_reg_read0xbc/0x130 Backtrace: [<00000000402ca2d4>] proc_reg_read0xbc/0x130 [<0000000040235bcc>] vfs_read0xc4/0x1d0 [<0000000040235f0c>] SyS_read0x94/0xf0 [<0000000040105fc0>] syscall_exit0x0/0x14 kpageflags_read() walks through the whole memory, even if some memory areas are physically not available. So, we should better not BUG on an unavailable pfn in pfn_to_nid() but just return the expected value -1 or 0. Signed-off-by: Helge Deller diff --git a/arch/parisc/include/asm/mmzone.h b/arch/parisc/include/asm/mmzone.h index 0e625ab..cc50d33 100644 --- a/arch/parisc/include/asm/mmzone.h +++ b/arch/parisc/include/asm/mmzone.h @@ -39,17 +39,14 @@ extern unsigned char pfnnid_map[PFNNID_MAP_MAX]; static inline int pfn_to_nid(unsigned long pfn) { unsigned int i; - unsigned char r; if (unlikely(pfn_is_io(pfn))) return 0; i = pfn >> PFNNID_SHIFT; BUG_ON(i >= ARRAY_SIZE(pfnnid_map)); - r = pfnnid_map[i]; - BUG_ON(r == 0xff); - return (int)r; + return (int)pfnnid_map[i]; } static inline int pfn_valid(int pfn) -- cgit v0.10.2 From 766039022a480ede847659daaa78772bdcc598ae Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Wed, 29 May 2013 09:56:58 +0000 Subject: parisc: rename "CONFIG_PA7100" to "CONFIG_PA7000" There's a Makefile line setting cflags for CONFIG_PA7100. But that Kconfig macro doesn't exist. There is a Kconfig symbol PA7000, which covers both PA7000 and PA7100 processors. So let's use the corresponding Kconfig macro. Signed-off-by: Paul Bolle Signed-off-by: Helge Deller diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile index 1976900..96ec398 100644 --- a/arch/parisc/Makefile +++ b/arch/parisc/Makefile @@ -66,7 +66,7 @@ KBUILD_CFLAGS_KERNEL += -mlong-calls endif # select which processor to optimise for -cflags-$(CONFIG_PA7100) += -march=1.1 -mschedule=7100 +cflags-$(CONFIG_PA7000) += -march=1.1 -mschedule=7100 cflags-$(CONFIG_PA7200) += -march=1.1 -mschedule=7200 cflags-$(CONFIG_PA7100LC) += -march=1.1 -mschedule=7100LC cflags-$(CONFIG_PA7300LC) += -march=1.1 -mschedule=7300 -- cgit v0.10.2 From ea99b1adf22abd62bdcf14b1c9a0a4d3664eefd8 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Thu, 30 May 2013 01:18:43 +0000 Subject: parisc: kernel: using strlcpy() instead of strcpy() 'boot_args' is an input args, and 'boot_command_line' has a fix length. So use strlcpy() instead of strcpy() to avoid memory overflow. Signed-off-by: Chen Gang Acked-by: Kyle McMartin Signed-off-by: Helge Deller diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c index 76b63e7..1e95b20 100644 --- a/arch/parisc/kernel/setup.c +++ b/arch/parisc/kernel/setup.c @@ -69,7 +69,8 @@ void __init setup_cmdline(char **cmdline_p) /* called from hpux boot loader */ boot_command_line[0] = '\0'; } else { - strcpy(boot_command_line, (char *)__va(boot_args[1])); + strlcpy(boot_command_line, (char *)__va(boot_args[1]), + COMMAND_LINE_SIZE); #ifdef CONFIG_BLK_DEV_INITRD if (boot_args[2] != 0) /* did palo pass us a ramdisk? */ -- cgit v0.10.2 From 2b6bac9ee99fa7d60dfa0debd82ccf4217931b1e Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 30 May 2013 13:48:07 +0000 Subject: MAINTAINERS: update parisc architecture file list Signed-off-by: Helge Deller diff --git a/MAINTAINERS b/MAINTAINERS index 7714c3c..f35a259 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6088,7 +6088,15 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git S: Maintained F: arch/parisc/ +F: Documentation/parisc/ F: drivers/parisc/ +F: drivers/char/agp/parisc-agp.c +F: drivers/input/serio/gscps2.c +F: drivers/parport/parport_gsc.* +F: drivers/tty/serial/8250/8250_gsc.c +F: drivers/video/sti* +F: drivers/video/console/sti* +F: drivers/video/logo/logo_parisc* PC87360 HARDWARE MONITORING DRIVER M: Jim Cromie -- cgit v0.10.2 From b47d4934e71d918814aee4a1d0211f81329b767e Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 30 May 2013 11:45:39 -0600 Subject: parisc/PCI: Set type for LBA bus_num resource The non-PAT resource probing code failed to set the type of the LBA bus_num resource (30aa80da43 "parisc/PCI: register busn_res for root buses" did the corresponding thing for the PAT case). This causes incorrect resource assignments and a non-working stifb framebuffer on most parisc machines. Signed-off-by: Bjorn Helgaas Signed-off-by: Helge Deller diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c index 2ef7103..5d25038 100644 --- a/drivers/parisc/lba_pci.c +++ b/drivers/parisc/lba_pci.c @@ -1096,6 +1096,7 @@ lba_legacy_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev) r->name = "LBA PCI Busses"; r->start = lba_num & 0xff; r->end = (lba_num>>8) & 0xff; + r->flags = IORESOURCE_BUS; /* Set up local PCI Bus resources - we don't need them for ** Legacy boxes but it's nice to see in /proc/iomem. -- cgit v0.10.2 From b204a4d2d4f2061659bb5c33f5a4013fb0f6ffbe Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Fri, 31 May 2013 22:24:58 +0000 Subject: parisc/PCI: lba: fix: convert to pci_create_root_bus() for correct root bus resources (v2) commit dc7dce280a Author: Bjorn Helgaas Date: Fri Oct 28 16:27:27 2011 -0600 parisc/PCI: lba: convert to pci_create_root_bus() for correct root bus resources Supply root bus resources to pci_create_root_bus() so they're correct immediately. This fixes the problem of "early" and "header" quirks seeing incorrect root bus resources. added tests for elmmio_space.start while it should use elmmio_space.flags. This for example led to incorrect resource assignments and a non-working stifb framebuffer on most parisc machines. LBA 10:1: PCI host bridge to bus 0000:01 pci_bus 0000:01: root bus resource [io 0x12000-0x13fff] (bus address [0x2000-0x3fff]) pci_bus 0000:01: root bus resource [mem 0xfffffffffa000000-0xfffffffffbffffff] (bus address [0xfa000000-0xfbffffff]) pci_bus 0000:01: root bus resource [mem 0xfffffffff4800000-0xfffffffff4ffffff] (bus address [0xf4800000-0xf4ffffff]) pci_bus 0000:01: root bus resource [??? 0x00000001 flags 0x0] Signed-off-by: Helge Deller Acked-by: Bjorn Helgaas diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c index 5d25038..1f05913 100644 --- a/drivers/parisc/lba_pci.c +++ b/drivers/parisc/lba_pci.c @@ -668,7 +668,7 @@ lba_fixup_bus(struct pci_bus *bus) BUG(); } - if (ldev->hba.elmmio_space.start) { + if (ldev->hba.elmmio_space.flags) { err = request_resource(&iomem_resource, &(ldev->hba.elmmio_space)); if (err < 0) { @@ -993,7 +993,7 @@ lba_pat_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev) case PAT_LMMIO: /* used to fix up pre-initialized MEM BARs */ - if (!lba_dev->hba.lmmio_space.start) { + if (!lba_dev->hba.lmmio_space.flags) { sprintf(lba_dev->hba.lmmio_name, "PCI%02x LMMIO", (int)lba_dev->hba.bus_num.start); @@ -1001,7 +1001,7 @@ lba_pat_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev) io->start; r = &lba_dev->hba.lmmio_space; r->name = lba_dev->hba.lmmio_name; - } else if (!lba_dev->hba.elmmio_space.start) { + } else if (!lba_dev->hba.elmmio_space.flags) { sprintf(lba_dev->hba.elmmio_name, "PCI%02x ELMMIO", (int)lba_dev->hba.bus_num.start); @@ -1495,7 +1495,7 @@ lba_driver_probe(struct parisc_device *dev) pci_add_resource_offset(&resources, &lba_dev->hba.io_space, HBA_PORT_BASE(lba_dev->hba.hba_num)); - if (lba_dev->hba.elmmio_space.start) + if (lba_dev->hba.elmmio_space.flags) pci_add_resource_offset(&resources, &lba_dev->hba.elmmio_space, lba_dev->hba.lmmio_space_offset); if (lba_dev->hba.lmmio_space.flags) -- cgit v0.10.2 From c218c713c56b01d4a1cd69390f675cc44857f5fd Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 30 May 2013 16:24:46 +0000 Subject: parport_pc: disable PARPORT_PC_SUPERIO on parisc architecture If enabled, CONFIG_PARPORT_PC_SUPERIO scans on PC-like hardware for various super-io chips by accessing i/o ports in a range which will crash any parisc hardware at once. In addition, parisc has it's own incompatible superio chip (CONFIG_SUPERIO), so if we disable PARPORT_PC_SUPERIO completely for parisc we can avoid that people by accident enable the parport_pc superio option too. Signed-off-by: Helge Deller diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig index 24e12d4..a505760 100644 --- a/drivers/parport/Kconfig +++ b/drivers/parport/Kconfig @@ -71,7 +71,7 @@ config PARPORT_PC_FIFO config PARPORT_PC_SUPERIO bool "SuperIO chipset support" - depends on PARPORT_PC + depends on PARPORT_PC && !PARISC help Saying Y here enables some probes for Super-IO chipsets in order to find out things like base addresses, IRQ lines and DMA channels. It -- cgit v0.10.2 From 4edb38695d9a3cd62739f8595e21f36f0aabf4c2 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 30 May 2013 21:06:39 +0000 Subject: parisc: parport0: fix this legacy no-device port driver! Fix the above kernel error from parport_announce_port() on 32bit GSC machines (e.g. B160L). The parport driver requires now a pointer to the device struct. Signed-off-by: Helge Deller diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c index a5251cb..6e3a60c 100644 --- a/drivers/parport/parport_gsc.c +++ b/drivers/parport/parport_gsc.c @@ -234,7 +234,7 @@ static int parport_PS2_supported(struct parport *pb) struct parport *parport_gsc_probe_port(unsigned long base, unsigned long base_hi, int irq, - int dma, struct pci_dev *dev) + int dma, struct parisc_device *padev) { struct parport_gsc_private *priv; struct parport_operations *ops; @@ -258,7 +258,6 @@ struct parport *parport_gsc_probe_port(unsigned long base, priv->ctr_writable = 0xff; priv->dma_buf = 0; priv->dma_handle = 0; - priv->dev = dev; p->base = base; p->base_hi = base_hi; p->irq = irq; @@ -282,6 +281,7 @@ struct parport *parport_gsc_probe_port(unsigned long base, return NULL; } + p->dev = &padev->dev; p->base_hi = base_hi; p->modes = tmp.modes; p->size = (p->modes & PARPORT_MODE_EPP)?8:3; @@ -373,7 +373,7 @@ static int parport_init_chip(struct parisc_device *dev) } p = parport_gsc_probe_port(port, 0, dev->irq, - /* PARPORT_IRQ_NONE */ PARPORT_DMA_NONE, NULL); + /* PARPORT_IRQ_NONE */ PARPORT_DMA_NONE, dev); if (p) parport_count++; dev_set_drvdata(&dev->dev, p); diff --git a/drivers/parport/parport_gsc.h b/drivers/parport/parport_gsc.h index fc9c37c..8122147 100644 --- a/drivers/parport/parport_gsc.h +++ b/drivers/parport/parport_gsc.h @@ -217,6 +217,6 @@ extern void parport_gsc_dec_use_count(void); extern struct parport *parport_gsc_probe_port(unsigned long base, unsigned long base_hi, int irq, int dma, - struct pci_dev *dev); + struct parisc_device *padev); #endif /* __DRIVERS_PARPORT_PARPORT_GSC_H */ -- cgit v0.10.2 From f3284f91535cc2e1406b7efe27a1de96c96c19b4 Mon Sep 17 00:00:00 2001 From: Maarten ter Huurne Date: Fri, 31 May 2013 16:45:13 +0200 Subject: regmap: rbtree: Fixed node range check on sync A node starting before the minimum register is no reason to reject it, since its end could be in range. The check for the end already exists two lines lower, so we can just remove the incorrect check. Signed-off-by: Maarten ter Huurne Signed-off-by: Mark Brown diff --git a/drivers/base/regmap/regcache-rbtree.c b/drivers/base/regmap/regcache-rbtree.c index b4e343b..02f490b 100644 --- a/drivers/base/regmap/regcache-rbtree.c +++ b/drivers/base/regmap/regcache-rbtree.c @@ -391,8 +391,6 @@ static int regcache_rbtree_sync(struct regmap *map, unsigned int min, for (node = rb_first(&rbtree_ctx->root); node; node = rb_next(node)) { rbnode = rb_entry(node, struct regcache_rbtree_node, node); - if (rbnode->base_reg < min) - continue; if (rbnode->base_reg > max) break; if (rbnode->base_reg + rbnode->blklen < min) -- cgit v0.10.2 From d9f1f489c034829c1082c0e7efa09450e716d23e Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 1 Jun 2013 19:31:15 +0100 Subject: MAINTAINERS: Remove myself from Wolfson maintainers I no longer work for Wolfson. Signed-off-by: Mark Brown diff --git a/MAINTAINERS b/MAINTAINERS index fd3a495..859cf06 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8985,7 +8985,7 @@ S: Maintained F: drivers/net/wireless/wl3501* WM97XX TOUCHSCREEN DRIVERS -M: Mark Brown +M: Mark Brown M: Liam Girdwood L: linux-input@vger.kernel.org T: git git://opensource.wolfsonmicro.com/linux-2.6-touch @@ -8995,7 +8995,6 @@ F: drivers/input/touchscreen/*wm97* F: include/linux/wm97xx.h WOLFSON MICROELECTRONICS DRIVERS -M: Mark Brown L: patches@opensource.wolfsonmicro.com T: git git://opensource.wolfsonmicro.com/linux-2.6-asoc T: git git://opensource.wolfsonmicro.com/linux-2.6-audioplus -- cgit v0.10.2 From af1d486c18bad7820b0ca52b413458914231102c Mon Sep 17 00:00:00 2001 From: "lan,Tianyu" Date: Tue, 28 May 2013 02:25:33 +0000 Subject: x86 / platform / hp_wmi: Fix bluetooth_rfkill misuse in hp_wmi_rfkill_setup() HP wmi platform driver fails to initialize GPS and causes poweroff failure in HP Elitebook 6930p. Call Trace: [] hp_wmi_bios_setup+0x25a/0x3a0 [hp_wmi] [] platform_drv_probe+0x3c/0x70 [] ? driver_sysfs_add+0x7a/0xb0 [] driver_probe_device+0x87/0x3a0 [] __driver_attach+0x93/0xa0 [] ? __device_attach+0x40/0x40 [] bus_for_each_dev+0x63/0xa0 [] driver_attach+0x1e/0x20 [] bus_add_driver+0x1f8/0x2b0 [] driver_register+0x71/0x150 [] platform_driver_register+0x46/0x50 [] platform_driver_probe+0x1b/0xa0 [] hp_wmi_init+0x1be/0x1fb [hp_wmi] [] ? hp_wmi_bios_setup+0x3a0/0x3a0 [hp_wmi] [] do_one_initcall+0x10a/0x160 [] load_module+0x1b46/0x2640 [] ? ddebug_proc_write+0xf0/0xf0 [] sys_init_module+0xa2/0xf0 [] system_call_fastpath+0x1a/0x1f Code: 48 ff ff ff 80 7b 24 00 74 d2 41 83 e5 01 45 38 ec 74 c9 48 8d bb a0 03 00 00 e8 ed fb aa e0 5b 41 5c 41 5d 44 89 f0 41 5e 5d c3 <0f> 0b 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 RIP [] rfkill_set_hw_state+0x9f/0xb0 [rfkill] RSP Check code and find this error is caused by misusing variable bluetooth_rfkill where gps_rfkill should be. Reported-and-tested-by: Iru Cai References: https://bugzilla.kernel.org/show_bug.cgi?id=58401 Cc: All Signed-off-by: Lan Tianyu Signed-off-by: Rafael J. Wysocki diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index 8df0c5a..d111c86 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -703,7 +703,7 @@ static int hp_wmi_rfkill_setup(struct platform_device *device) } rfkill_init_sw_state(gps_rfkill, hp_wmi_get_sw_state(HPWMI_GPS)); - rfkill_set_hw_state(bluetooth_rfkill, + rfkill_set_hw_state(gps_rfkill, hp_wmi_get_hw_state(HPWMI_GPS)); err = rfkill_register(gps_rfkill); if (err) -- cgit v0.10.2 From fedbe9bc6fd3e14b1ffbb3dac407777ac4a3650c Mon Sep 17 00:00:00 2001 From: Alex Hung Date: Tue, 28 May 2013 02:05:09 +0000 Subject: ACPI / video: ignore BIOS initial backlight value for HP m4 On HP m4 lapops, BIOS reports minimum backlight on boot and causes backlight to dim completely. This ignores the initial backlight values and set to max brightness. References: https://bugs.launchpad.net/bugs/1184501 Cc: All Signed-off-by: Alex Hung Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 5b32e15..d0937ab 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -464,6 +464,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "HP 1000 Notebook PC"), }, }, + { + .callback = video_ignore_initial_backlight, + .ident = "HP Pavilion m4", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion m4 Notebook PC"), + }, + }, {} }; -- cgit v0.10.2 From 780a6ec640a3fed671fc2c40e4dd30c03eca3ac3 Mon Sep 17 00:00:00 2001 From: Ash Willis Date: Wed, 29 May 2013 01:27:59 +0000 Subject: ACPI / video: ignore BIOS initial backlight value for HP Pavilion g6 This patch addresses kernel bug 56661. BIOS reports an incorrect backlight value, causing the driver to switch off the backlight completely during startup. This patch ignores the incorrect value from BIOS. References: https://bugzilla.kernel.org/show_bug.cgi?id=56661 Signed-off-by: Ash Willis Cc: All Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index d0937ab..5d7075d 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -458,6 +458,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = { }, { .callback = video_ignore_initial_backlight, + .ident = "HP Pavilion g6 Notebook PC", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion g6 Notebook PC"), + }, + }, + { + .callback = video_ignore_initial_backlight, .ident = "HP 1000 Notebook PC", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), -- cgit v0.10.2 From 52a2a1087b5924de00484f35ef5e2a73f61dbd22 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 1 Jun 2013 02:38:35 +0400 Subject: sata_rcar: fix interrupt handling The driver's interrupt handling code is too picky in deciding whether it should handle an interrupt or not which causes completely unneeded spurious interrupts. Thus make sata_rcar_{ata|serr}_interrupt() *void*; add ATA status register read to sata_rcar_ata_interrupt() to clear an unexpected ATA interrupt -- it doesn't get cleared by writing to the SATAINTSTAT register in the interrupt mode we use. Also, in sata_rcar_ata_interrupt() we should check SATAINTSTAT register only for enabled interrupts and we should clear only those interrupts that we have read as active first time around, because else we have a race and risk clearing an interrupt that can occur between read and write of the SATAINTSTAT register and never registering it... Signed-off-by: Sergei Shtylyov Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c index a8e091a..249c8a2 100644 --- a/drivers/ata/sata_rcar.c +++ b/drivers/ata/sata_rcar.c @@ -619,17 +619,16 @@ static struct ata_port_operations sata_rcar_port_ops = { .bmdma_status = sata_rcar_bmdma_status, }; -static int sata_rcar_serr_interrupt(struct ata_port *ap) +static void sata_rcar_serr_interrupt(struct ata_port *ap) { struct sata_rcar_priv *priv = ap->host->private_data; struct ata_eh_info *ehi = &ap->link.eh_info; int freeze = 0; - int handled = 0; u32 serror; serror = ioread32(priv->base + SCRSERR_REG); if (!serror) - return 0; + return; DPRINTK("SError @host_intr: 0x%x\n", serror); @@ -642,7 +641,6 @@ static int sata_rcar_serr_interrupt(struct ata_port *ap) ata_ehi_push_desc(ehi, "%s", "hotplug"); freeze = serror & SERR_COMM_WAKE ? 0 : 1; - handled = 1; } /* freeze or abort */ @@ -650,11 +648,9 @@ static int sata_rcar_serr_interrupt(struct ata_port *ap) ata_port_freeze(ap); else ata_port_abort(ap); - - return handled; } -static int sata_rcar_ata_interrupt(struct ata_port *ap) +static void sata_rcar_ata_interrupt(struct ata_port *ap) { struct ata_queued_cmd *qc; int handled = 0; @@ -663,7 +659,9 @@ static int sata_rcar_ata_interrupt(struct ata_port *ap) if (qc) handled |= ata_bmdma_port_intr(ap, qc); - return handled; + /* be sure to clear ATA interrupt */ + if (!handled) + sata_rcar_check_status(ap); } static irqreturn_t sata_rcar_interrupt(int irq, void *dev_instance) @@ -678,20 +676,21 @@ static irqreturn_t sata_rcar_interrupt(int irq, void *dev_instance) spin_lock_irqsave(&host->lock, flags); sataintstat = ioread32(priv->base + SATAINTSTAT_REG); + sataintstat &= SATA_RCAR_INT_MASK; if (!sataintstat) goto done; /* ack */ - iowrite32(sataintstat & ~SATA_RCAR_INT_MASK, - priv->base + SATAINTSTAT_REG); + iowrite32(~sataintstat & 0x7ff, priv->base + SATAINTSTAT_REG); ap = host->ports[0]; if (sataintstat & SATAINTSTAT_ATA) - handled |= sata_rcar_ata_interrupt(ap); + sata_rcar_ata_interrupt(ap); if (sataintstat & SATAINTSTAT_SERR) - handled |= sata_rcar_serr_interrupt(ap); + sata_rcar_serr_interrupt(ap); + handled = 1; done: spin_unlock_irqrestore(&host->lock, flags); -- cgit v0.10.2 From d683b96b072dc4680fc74964eca77e6a23d1fa6e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 2 Jun 2013 17:11:17 +0900 Subject: Linux 3.10-rc4 diff --git a/Makefile b/Makefile index 73e20db..49aa84b 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 10 SUBLEVEL = 0 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Unicycling Gorilla # *DOCUMENTATION* -- cgit v0.10.2 From 13731d862cf5219216533a3b0de052cee4cc5038 Mon Sep 17 00:00:00 2001 From: Jongsung Kim Date: Wed, 29 May 2013 22:07:39 -0600 Subject: ARM: bcm2835: override the HW UART periphid Stephen Warren reported the recent commit 78506f2 (add support for extended FIFO-size of PL011-r1p5) breaks the serial port on the BCM2835 ARM SoC. A UART compatible with the ARM PL011-r1p5 should have 32-deep FIFOs. The BCM2835 UART just looks like an ARM PL011-r1p5, but has 16-deep FIFOs just like PL011-r1p4 or earlier revisions. As a workaround for this compatibility issue, this patch overrides the HW UART periphid register values with the actually compatible UART periphid 0x00241011 (r1p3 or r1p4). Reported-by: Stephen Warren Signed-off-by: Jongsung Kim Signed-off-by: Stephen Warren Signed-off-by: Olof Johansson diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index f0052dc..1e12aef 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -44,6 +44,7 @@ reg = <0x7e201000 0x1000>; interrupts = <2 25>; clock-frequency = <3000000>; + arm,primecell-periphid = <0x00241011>; }; gpio: gpio { -- cgit v0.10.2 From c87a124a5d5e8cf8e21c4363c3372bcaf53ea190 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 29 May 2013 09:06:27 +0000 Subject: net: force a reload of first item in hlist_nulls_for_each_entry_rcu Roman Gushchin discovered that udp4_lib_lookup2() was not reloading first item in the rcu protected list, in case the loop was restarted. This produced soft lockups as in https://lkml.org/lkml/2013/4/16/37 rcu_dereference(X)/ACCESS_ONCE(X) seem to not work as intended if X is ptr->field : In some cases, gcc caches the value or ptr->field in a register. Use a barrier() to disallow such caching, as documented in Documentation/atomic_ops.txt line 114 Thanks a lot to Roman for providing analysis and numerous patches. Diagnosed-by: Roman Gushchin Signed-off-by: Eric Dumazet Reported-by: Boris Zhmurov Signed-off-by: Roman Gushchin Acked-by: Paul E. McKenney Signed-off-by: David S. Miller diff --git a/include/linux/rculist_nulls.h b/include/linux/rculist_nulls.h index 2ae1371..1c33dd7 100644 --- a/include/linux/rculist_nulls.h +++ b/include/linux/rculist_nulls.h @@ -105,9 +105,14 @@ static inline void hlist_nulls_add_head_rcu(struct hlist_nulls_node *n, * @head: the head for your list. * @member: the name of the hlist_nulls_node within the struct. * + * The barrier() is needed to make sure compiler doesn't cache first element [1], + * as this loop can be restarted [2] + * [1] Documentation/atomic_ops.txt around line 114 + * [2] Documentation/RCU/rculist_nulls.txt around line 146 */ #define hlist_nulls_for_each_entry_rcu(tpos, pos, head, member) \ - for (pos = rcu_dereference_raw(hlist_nulls_first_rcu(head)); \ + for (({barrier();}), \ + pos = rcu_dereference_raw(hlist_nulls_first_rcu(head)); \ (!is_a_nulls(pos)) && \ ({ tpos = hlist_nulls_entry(pos, typeof(*tpos), member); 1; }); \ pos = rcu_dereference_raw(hlist_nulls_next_rcu(pos))) -- cgit v0.10.2 From 01cb71d2d47b78354358e4bb938bb06323e17498 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 2 Jun 2013 13:55:05 +0000 Subject: net_sched: restore "overhead xxx" handling commit 56b765b79 ("htb: improved accuracy at high rates") broke the "overhead xxx" handling, as well as the "linklayer atm" attribute. tc class add ... htb rate X ceil Y linklayer atm overhead 10 This patch restores the "overhead xxx" handling, for htb, tbf and act_police The "linklayer atm" thing needs a separate fix. Reported-by: Jesper Dangaard Brouer Signed-off-by: Eric Dumazet Cc: Vimalkumar Cc: Jiri Pirko Signed-off-by: David S. Miller diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h index f10818f..e7f4e21 100644 --- a/include/net/sch_generic.h +++ b/include/net/sch_generic.h @@ -679,22 +679,26 @@ static inline struct sk_buff *skb_act_clone(struct sk_buff *skb, gfp_t gfp_mask, #endif struct psched_ratecfg { - u64 rate_bps; - u32 mult; - u32 shift; + u64 rate_bps; + u32 mult; + u16 overhead; + u8 shift; }; static inline u64 psched_l2t_ns(const struct psched_ratecfg *r, unsigned int len) { - return ((u64)len * r->mult) >> r->shift; + return ((u64)(len + r->overhead) * r->mult) >> r->shift; } -extern void psched_ratecfg_precompute(struct psched_ratecfg *r, u32 rate); +extern void psched_ratecfg_precompute(struct psched_ratecfg *r, const struct tc_ratespec *conf); -static inline u32 psched_ratecfg_getrate(const struct psched_ratecfg *r) +static inline void psched_ratecfg_getrate(struct tc_ratespec *res, + const struct psched_ratecfg *r) { - return r->rate_bps >> 3; + memset(res, 0, sizeof(*res)); + res->rate = r->rate_bps >> 3; + res->overhead = r->overhead; } #endif diff --git a/net/sched/act_police.c b/net/sched/act_police.c index 823463a..189e3c5 100644 --- a/net/sched/act_police.c +++ b/net/sched/act_police.c @@ -231,14 +231,14 @@ override: } if (R_tab) { police->rate_present = true; - psched_ratecfg_precompute(&police->rate, R_tab->rate.rate); + psched_ratecfg_precompute(&police->rate, &R_tab->rate); qdisc_put_rtab(R_tab); } else { police->rate_present = false; } if (P_tab) { police->peak_present = true; - psched_ratecfg_precompute(&police->peak, P_tab->rate.rate); + psched_ratecfg_precompute(&police->peak, &P_tab->rate); qdisc_put_rtab(P_tab); } else { police->peak_present = false; @@ -376,9 +376,9 @@ tcf_act_police_dump(struct sk_buff *skb, struct tc_action *a, int bind, int ref) }; if (police->rate_present) - opt.rate.rate = psched_ratecfg_getrate(&police->rate); + psched_ratecfg_getrate(&opt.rate, &police->rate); if (police->peak_present) - opt.peakrate.rate = psched_ratecfg_getrate(&police->peak); + psched_ratecfg_getrate(&opt.peakrate, &police->peak); if (nla_put(skb, TCA_POLICE_TBF, sizeof(opt), &opt)) goto nla_put_failure; if (police->tcfp_result && diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index eac7e0e..2022408 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -898,14 +898,16 @@ void dev_shutdown(struct net_device *dev) WARN_ON(timer_pending(&dev->watchdog_timer)); } -void psched_ratecfg_precompute(struct psched_ratecfg *r, u32 rate) +void psched_ratecfg_precompute(struct psched_ratecfg *r, + const struct tc_ratespec *conf) { u64 factor; u64 mult; int shift; - r->rate_bps = (u64)rate << 3; - r->shift = 0; + memset(r, 0, sizeof(*r)); + r->overhead = conf->overhead; + r->rate_bps = (u64)conf->rate << 3; r->mult = 1; /* * Calibrate mult, shift so that token counting is accurate diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index 79b1876..f87fb85 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -1090,9 +1090,9 @@ static int htb_dump_class(struct Qdisc *sch, unsigned long arg, memset(&opt, 0, sizeof(opt)); - opt.rate.rate = psched_ratecfg_getrate(&cl->rate); + psched_ratecfg_getrate(&opt.rate, &cl->rate); opt.buffer = PSCHED_NS2TICKS(cl->buffer); - opt.ceil.rate = psched_ratecfg_getrate(&cl->ceil); + psched_ratecfg_getrate(&opt.ceil, &cl->ceil); opt.cbuffer = PSCHED_NS2TICKS(cl->cbuffer); opt.quantum = cl->quantum; opt.prio = cl->prio; @@ -1459,8 +1459,8 @@ static int htb_change_class(struct Qdisc *sch, u32 classid, cl->prio = TC_HTB_NUMPRIO - 1; } - psched_ratecfg_precompute(&cl->rate, hopt->rate.rate); - psched_ratecfg_precompute(&cl->ceil, hopt->ceil.rate); + psched_ratecfg_precompute(&cl->rate, &hopt->rate); + psched_ratecfg_precompute(&cl->ceil, &hopt->ceil); cl->buffer = PSCHED_TICKS2NS(hopt->buffer); cl->cbuffer = PSCHED_TICKS2NS(hopt->buffer); diff --git a/net/sched/sch_tbf.c b/net/sched/sch_tbf.c index c8388f3..e478d31 100644 --- a/net/sched/sch_tbf.c +++ b/net/sched/sch_tbf.c @@ -298,9 +298,9 @@ static int tbf_change(struct Qdisc *sch, struct nlattr *opt) q->tokens = q->buffer; q->ptokens = q->mtu; - psched_ratecfg_precompute(&q->rate, rtab->rate.rate); + psched_ratecfg_precompute(&q->rate, &rtab->rate); if (ptab) { - psched_ratecfg_precompute(&q->peak, ptab->rate.rate); + psched_ratecfg_precompute(&q->peak, &ptab->rate); q->peak_present = true; } else { q->peak_present = false; @@ -350,9 +350,9 @@ static int tbf_dump(struct Qdisc *sch, struct sk_buff *skb) goto nla_put_failure; opt.limit = q->limit; - opt.rate.rate = psched_ratecfg_getrate(&q->rate); + psched_ratecfg_getrate(&opt.rate, &q->rate); if (q->peak_present) - opt.peakrate.rate = psched_ratecfg_getrate(&q->peak); + psched_ratecfg_getrate(&opt.peakrate, &q->peak); else memset(&opt.peakrate, 0, sizeof(opt.peakrate)); opt.mtu = PSCHED_NS2TICKS(q->mtu); -- cgit v0.10.2 From a08b9bc586a7810cdebbc316d5cbaed56a2a04a9 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Fri, 31 May 2013 17:01:54 -0400 Subject: ARM: imx: clk-imx6q: AXI clock select index is incorrect The AXI clock mux should be as below: 00: periph; 01: pll2_pfd2_396m; 10: periph; 11: pll3_pfd1_540m; Signed-off-by: Anson Huang Signed-off-by: Shawn Guo diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index ba2de54..4e3148c 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -181,7 +181,7 @@ static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", }; static const char *periph_sels[] = { "periph_pre", "periph_clk2", }; static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; -static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "pll3_pfd1_540m", }; +static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", }; static const char *audio_sels[] = { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", }; static const char *gpu_axi_sels[] = { "axi", "ahb", }; static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", }; -- cgit v0.10.2 From a0c6d309c6df14655f9962f666d1da96318b0b7c Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Sun, 2 Jun 2013 19:49:07 +0200 Subject: ALSA: usb-audio: fix Roland/Cakewalk UM-3G support Commit 927c9423dd5f2d1c0b93d5e694ab84b4a5559713 (ALSA: usb-audio: add Edirol UM-3G support) used a wrong quirk type, which would make the driver refuse to attach with the error message "MIDIStreaming interface descriptor not found". Cc: # 3.3 and later Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 7f1722f..6ae71b8 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -1792,7 +1792,11 @@ YAMAHA_DEVICE(0x7010, "UB99"), USB_DEVICE_VENDOR_SPEC(0x0582, 0x0108), .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { .ifnum = 0, - .type = QUIRK_MIDI_STANDARD_INTERFACE + .type = QUIRK_MIDI_FIXED_ENDPOINT, + .data = & (const struct snd_usb_midi_endpoint_info) { + .out_cables = 0x0007, + .in_cables = 0x0007 + } } }, { -- cgit v0.10.2 From 1f3dc6d76424538efb2095055035254b14499c77 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 23 May 2013 09:49:05 -0700 Subject: mips/kvm: Fix ABI for use of FPU. Define a non-empty struct kvm_fpu. Signed-off-by: David Daney Acked-by: Sanjay Lal Signed-off-by: Paolo Bonzini diff --git a/arch/mips/include/uapi/asm/kvm.h b/arch/mips/include/uapi/asm/kvm.h index 85789ea..0e8f565 100644 --- a/arch/mips/include/uapi/asm/kvm.h +++ b/arch/mips/include/uapi/asm/kvm.h @@ -1,11 +1,12 @@ /* -* This file is subject to the terms and conditions of the GNU General Public -* License. See the file "COPYING" in the main directory of this archive -* for more details. -* -* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. -* Authors: Sanjay Lal -*/ + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2013 Cavium, Inc. + * Authors: Sanjay Lal + */ #ifndef __LINUX_KVM_MIPS_H #define __LINUX_KVM_MIPS_H @@ -31,8 +32,20 @@ struct kvm_regs { struct kvm_sregs { }; -/* for KVM_GET_FPU and KVM_SET_FPU */ +/* + * for KVM_GET_FPU and KVM_SET_FPU + * + * If Status[FR] is zero (32-bit FPU), the upper 32-bits of the FPRs + * are zero filled. + */ struct kvm_fpu { + __u64 fpr[32]; + __u32 fir; + __u32 fccr; + __u32 fexr; + __u32 fenr; + __u32 fcsr; + __u32 pad; }; struct kvm_debug_exit_arch { -- cgit v0.10.2 From 688cded320a4760de679160b42f9a81face02674 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 23 May 2013 09:49:06 -0700 Subject: mips/kvm: Fix ABI for use of 64-bit registers. All registers are 64-bits wide, 32-bit guests use the least significant portion of the register storage fields. Signed-off-by: David Daney Acked-by: Sanjay Lal Signed-off-by: Paolo Bonzini diff --git a/arch/mips/include/uapi/asm/kvm.h b/arch/mips/include/uapi/asm/kvm.h index 0e8f565..86812fb 100644 --- a/arch/mips/include/uapi/asm/kvm.h +++ b/arch/mips/include/uapi/asm/kvm.h @@ -18,12 +18,18 @@ #define N_MIPS_COPROC_REGS 32 #define N_MIPS_COPROC_SEL 8 -/* for KVM_GET_REGS and KVM_SET_REGS */ +/* + * for KVM_GET_REGS and KVM_SET_REGS + * + * If Config[AT] is zero (32-bit CPU), the register contents are + * stored in the lower 32-bits of the struct kvm_regs fields and sign + * extended to 64-bits. + */ struct kvm_regs { - __u32 gprs[32]; - __u32 hi; - __u32 lo; - __u32 pc; + __u64 gprs[32]; + __u64 hi; + __u64 lo; + __u64 pc; __u32 cp0reg[N_MIPS_COPROC_REGS][N_MIPS_COPROC_SEL]; }; -- cgit v0.10.2 From bf32ebf66d74e8a196256d7ac2a4f3c6938c614a Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 23 May 2013 09:49:07 -0700 Subject: mips/kvm: Fix name of gpr field in struct kvm_regs. Signed-off-by: David Daney Acked-by: Sanjay Lal Signed-off-by: Paolo Bonzini diff --git a/arch/mips/include/uapi/asm/kvm.h b/arch/mips/include/uapi/asm/kvm.h index 86812fb..d145ead 100644 --- a/arch/mips/include/uapi/asm/kvm.h +++ b/arch/mips/include/uapi/asm/kvm.h @@ -26,7 +26,8 @@ * extended to 64-bits. */ struct kvm_regs { - __u64 gprs[32]; + /* out (KVM_GET_REGS) / in (KVM_SET_REGS) */ + __u64 gpr[32]; __u64 hi; __u64 lo; __u64 pc; diff --git a/arch/mips/kvm/kvm_mips.c b/arch/mips/kvm/kvm_mips.c index e0dad02..93da750 100644 --- a/arch/mips/kvm/kvm_mips.c +++ b/arch/mips/kvm/kvm_mips.c @@ -678,7 +678,7 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) int i; for (i = 0; i < 32; i++) - vcpu->arch.gprs[i] = regs->gprs[i]; + vcpu->arch.gprs[i] = regs->gpr[i]; vcpu->arch.hi = regs->hi; vcpu->arch.lo = regs->lo; @@ -692,7 +692,7 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) int i; for (i = 0; i < 32; i++) - regs->gprs[i] = vcpu->arch.gprs[i]; + regs->gpr[i] = vcpu->arch.gprs[i]; regs->hi = vcpu->arch.hi; regs->lo = vcpu->arch.lo; -- cgit v0.10.2 From 8d17dd041a548b016ff401d36be6b2563c940ed5 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 23 May 2013 09:49:08 -0700 Subject: mips/kvm: Use ARRAY_SIZE() instead of hardcoded constants in kvm_arch_vcpu_ioctl_{s,g}et_regs Also we cannot set special zero register, so force it to zero. Signed-off-by: David Daney Acked-by: Sanjay Lal Signed-off-by: Paolo Bonzini diff --git a/arch/mips/kvm/kvm_mips.c b/arch/mips/kvm/kvm_mips.c index 93da750..71a1fc1 100644 --- a/arch/mips/kvm/kvm_mips.c +++ b/arch/mips/kvm/kvm_mips.c @@ -677,9 +677,9 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) { int i; - for (i = 0; i < 32; i++) + for (i = 1; i < ARRAY_SIZE(vcpu->arch.gprs); i++) vcpu->arch.gprs[i] = regs->gpr[i]; - + vcpu->arch.gprs[0] = 0; /* zero is special, and cannot be set. */ vcpu->arch.hi = regs->hi; vcpu->arch.lo = regs->lo; vcpu->arch.pc = regs->pc; @@ -691,7 +691,7 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) { int i; - for (i = 0; i < 32; i++) + for (i = 0; i < ARRAY_SIZE(vcpu->arch.gprs); i++) regs->gpr[i] = vcpu->arch.gprs[i]; regs->hi = vcpu->arch.hi; -- cgit v0.10.2 From 4c73fb2b05192f2c817940b38015c36007379380 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 23 May 2013 09:49:09 -0700 Subject: mips/kvm: Fix ABI by moving manipulation of CP0 registers to KVM_{G,S}ET_ONE_REG Because not all 256 CP0 registers are ever implemented, we need a different method of manipulating them. Use the KVM_SET_ONE_REG/KVM_GET_ONE_REG mechanism. Now unused code and definitions are removed. Signed-off-by: David Daney Acked-by: Sanjay Lal Signed-off-by: Paolo Bonzini diff --git a/arch/mips/include/asm/kvm_host.h b/arch/mips/include/asm/kvm_host.h index 143875c..4d6fa0b 100644 --- a/arch/mips/include/asm/kvm_host.h +++ b/arch/mips/include/asm/kvm_host.h @@ -496,10 +496,6 @@ struct kvm_mips_callbacks { uint32_t cause); int (*irq_clear) (struct kvm_vcpu *vcpu, unsigned int priority, uint32_t cause); - int (*vcpu_ioctl_get_regs) (struct kvm_vcpu *vcpu, - struct kvm_regs *regs); - int (*vcpu_ioctl_set_regs) (struct kvm_vcpu *vcpu, - struct kvm_regs *regs); }; extern struct kvm_mips_callbacks *kvm_mips_callbacks; int kvm_mips_emulation_init(struct kvm_mips_callbacks **install_callbacks); diff --git a/arch/mips/include/uapi/asm/kvm.h b/arch/mips/include/uapi/asm/kvm.h index d145ead..3f424f5 100644 --- a/arch/mips/include/uapi/asm/kvm.h +++ b/arch/mips/include/uapi/asm/kvm.h @@ -13,10 +13,11 @@ #include -#define __KVM_MIPS - -#define N_MIPS_COPROC_REGS 32 -#define N_MIPS_COPROC_SEL 8 +/* + * KVM MIPS specific structures and definitions. + * + * Some parts derived from the x86 version of this file. + */ /* * for KVM_GET_REGS and KVM_SET_REGS @@ -31,12 +32,6 @@ struct kvm_regs { __u64 hi; __u64 lo; __u64 pc; - - __u32 cp0reg[N_MIPS_COPROC_REGS][N_MIPS_COPROC_SEL]; -}; - -/* for KVM_GET_SREGS and KVM_SET_SREGS */ -struct kvm_sregs { }; /* @@ -55,21 +50,89 @@ struct kvm_fpu { __u32 pad; }; + +/* + * For MIPS, we use KVM_SET_ONE_REG and KVM_GET_ONE_REG to access CP0 + * registers. The id field is broken down as follows: + * + * bits[2..0] - Register 'sel' index. + * bits[7..3] - Register 'rd' index. + * bits[15..8] - Must be zero. + * bits[63..16] - 1 -> CP0 registers. + * + * Other sets registers may be added in the future. Each set would + * have its own identifier in bits[63..16]. + * + * The addr field of struct kvm_one_reg must point to an aligned + * 64-bit wide location. For registers that are narrower than + * 64-bits, the value is stored in the low order bits of the location, + * and sign extended to 64-bits. + * + * The registers defined in struct kvm_regs are also accessible, the + * id values for these are below. + */ + +#define KVM_REG_MIPS_R0 0 +#define KVM_REG_MIPS_R1 1 +#define KVM_REG_MIPS_R2 2 +#define KVM_REG_MIPS_R3 3 +#define KVM_REG_MIPS_R4 4 +#define KVM_REG_MIPS_R5 5 +#define KVM_REG_MIPS_R6 6 +#define KVM_REG_MIPS_R7 7 +#define KVM_REG_MIPS_R8 8 +#define KVM_REG_MIPS_R9 9 +#define KVM_REG_MIPS_R10 10 +#define KVM_REG_MIPS_R11 11 +#define KVM_REG_MIPS_R12 12 +#define KVM_REG_MIPS_R13 13 +#define KVM_REG_MIPS_R14 14 +#define KVM_REG_MIPS_R15 15 +#define KVM_REG_MIPS_R16 16 +#define KVM_REG_MIPS_R17 17 +#define KVM_REG_MIPS_R18 18 +#define KVM_REG_MIPS_R19 19 +#define KVM_REG_MIPS_R20 20 +#define KVM_REG_MIPS_R21 21 +#define KVM_REG_MIPS_R22 22 +#define KVM_REG_MIPS_R23 23 +#define KVM_REG_MIPS_R24 24 +#define KVM_REG_MIPS_R25 25 +#define KVM_REG_MIPS_R26 26 +#define KVM_REG_MIPS_R27 27 +#define KVM_REG_MIPS_R28 28 +#define KVM_REG_MIPS_R29 29 +#define KVM_REG_MIPS_R30 30 +#define KVM_REG_MIPS_R31 31 + +#define KVM_REG_MIPS_HI 32 +#define KVM_REG_MIPS_LO 33 +#define KVM_REG_MIPS_PC 34 + +/* + * KVM MIPS specific structures and definitions + * + */ struct kvm_debug_exit_arch { + __u64 epc; }; /* for KVM_SET_GUEST_DEBUG */ struct kvm_guest_debug_arch { }; +/* definition of registers in kvm_run */ +struct kvm_sync_regs { +}; + +/* dummy definition */ +struct kvm_sregs { +}; + struct kvm_mips_interrupt { /* in */ __u32 cpu; __u32 irq; }; -/* definition of registers in kvm_run */ -struct kvm_sync_regs { -}; - #endif /* __LINUX_KVM_MIPS_H */ diff --git a/arch/mips/kvm/kvm_mips.c b/arch/mips/kvm/kvm_mips.c index 71a1fc1..3caa006 100644 --- a/arch/mips/kvm/kvm_mips.c +++ b/arch/mips/kvm/kvm_mips.c @@ -485,15 +485,253 @@ kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu, return -EINVAL; } +#define KVM_REG_MIPS_CP0_INDEX (0x10000 + 8 * 0 + 0) +#define KVM_REG_MIPS_CP0_ENTRYLO0 (0x10000 + 8 * 2 + 0) +#define KVM_REG_MIPS_CP0_ENTRYLO1 (0x10000 + 8 * 3 + 0) +#define KVM_REG_MIPS_CP0_CONTEXT (0x10000 + 8 * 4 + 0) +#define KVM_REG_MIPS_CP0_USERLOCAL (0x10000 + 8 * 4 + 2) +#define KVM_REG_MIPS_CP0_PAGEMASK (0x10000 + 8 * 5 + 0) +#define KVM_REG_MIPS_CP0_PAGEGRAIN (0x10000 + 8 * 5 + 1) +#define KVM_REG_MIPS_CP0_WIRED (0x10000 + 8 * 6 + 0) +#define KVM_REG_MIPS_CP0_HWRENA (0x10000 + 8 * 7 + 0) +#define KVM_REG_MIPS_CP0_BADVADDR (0x10000 + 8 * 8 + 0) +#define KVM_REG_MIPS_CP0_COUNT (0x10000 + 8 * 9 + 0) +#define KVM_REG_MIPS_CP0_ENTRYHI (0x10000 + 8 * 10 + 0) +#define KVM_REG_MIPS_CP0_COMPARE (0x10000 + 8 * 11 + 0) +#define KVM_REG_MIPS_CP0_STATUS (0x10000 + 8 * 12 + 0) +#define KVM_REG_MIPS_CP0_CAUSE (0x10000 + 8 * 13 + 0) +#define KVM_REG_MIPS_CP0_EBASE (0x10000 + 8 * 15 + 1) +#define KVM_REG_MIPS_CP0_CONFIG (0x10000 + 8 * 16 + 0) +#define KVM_REG_MIPS_CP0_CONFIG1 (0x10000 + 8 * 16 + 1) +#define KVM_REG_MIPS_CP0_CONFIG2 (0x10000 + 8 * 16 + 2) +#define KVM_REG_MIPS_CP0_CONFIG3 (0x10000 + 8 * 16 + 3) +#define KVM_REG_MIPS_CP0_CONFIG7 (0x10000 + 8 * 16 + 7) +#define KVM_REG_MIPS_CP0_XCONTEXT (0x10000 + 8 * 20 + 0) +#define KVM_REG_MIPS_CP0_ERROREPC (0x10000 + 8 * 30 + 0) + +static u64 kvm_mips_get_one_regs[] = { + KVM_REG_MIPS_R0, + KVM_REG_MIPS_R1, + KVM_REG_MIPS_R2, + KVM_REG_MIPS_R3, + KVM_REG_MIPS_R4, + KVM_REG_MIPS_R5, + KVM_REG_MIPS_R6, + KVM_REG_MIPS_R7, + KVM_REG_MIPS_R8, + KVM_REG_MIPS_R9, + KVM_REG_MIPS_R10, + KVM_REG_MIPS_R11, + KVM_REG_MIPS_R12, + KVM_REG_MIPS_R13, + KVM_REG_MIPS_R14, + KVM_REG_MIPS_R15, + KVM_REG_MIPS_R16, + KVM_REG_MIPS_R17, + KVM_REG_MIPS_R18, + KVM_REG_MIPS_R19, + KVM_REG_MIPS_R20, + KVM_REG_MIPS_R21, + KVM_REG_MIPS_R22, + KVM_REG_MIPS_R23, + KVM_REG_MIPS_R24, + KVM_REG_MIPS_R25, + KVM_REG_MIPS_R26, + KVM_REG_MIPS_R27, + KVM_REG_MIPS_R28, + KVM_REG_MIPS_R29, + KVM_REG_MIPS_R30, + KVM_REG_MIPS_R31, + + KVM_REG_MIPS_HI, + KVM_REG_MIPS_LO, + KVM_REG_MIPS_PC, + + KVM_REG_MIPS_CP0_INDEX, + KVM_REG_MIPS_CP0_CONTEXT, + KVM_REG_MIPS_CP0_PAGEMASK, + KVM_REG_MIPS_CP0_WIRED, + KVM_REG_MIPS_CP0_BADVADDR, + KVM_REG_MIPS_CP0_ENTRYHI, + KVM_REG_MIPS_CP0_STATUS, + KVM_REG_MIPS_CP0_CAUSE, + /* EPC set via kvm_regs, et al. */ + KVM_REG_MIPS_CP0_CONFIG, + KVM_REG_MIPS_CP0_CONFIG1, + KVM_REG_MIPS_CP0_CONFIG2, + KVM_REG_MIPS_CP0_CONFIG3, + KVM_REG_MIPS_CP0_CONFIG7, + KVM_REG_MIPS_CP0_ERROREPC +}; + +static int kvm_mips_get_reg(struct kvm_vcpu *vcpu, + const struct kvm_one_reg *reg) +{ + u64 __user *uaddr = (u64 __user *)(long)reg->addr; + + struct mips_coproc *cop0 = vcpu->arch.cop0; + s64 v; + + switch (reg->id) { + case KVM_REG_MIPS_R0 ... KVM_REG_MIPS_R31: + v = (long)vcpu->arch.gprs[reg->id - KVM_REG_MIPS_R0]; + break; + case KVM_REG_MIPS_HI: + v = (long)vcpu->arch.hi; + break; + case KVM_REG_MIPS_LO: + v = (long)vcpu->arch.lo; + break; + case KVM_REG_MIPS_PC: + v = (long)vcpu->arch.pc; + break; + + case KVM_REG_MIPS_CP0_INDEX: + v = (long)kvm_read_c0_guest_index(cop0); + break; + case KVM_REG_MIPS_CP0_CONTEXT: + v = (long)kvm_read_c0_guest_context(cop0); + break; + case KVM_REG_MIPS_CP0_PAGEMASK: + v = (long)kvm_read_c0_guest_pagemask(cop0); + break; + case KVM_REG_MIPS_CP0_WIRED: + v = (long)kvm_read_c0_guest_wired(cop0); + break; + case KVM_REG_MIPS_CP0_BADVADDR: + v = (long)kvm_read_c0_guest_badvaddr(cop0); + break; + case KVM_REG_MIPS_CP0_ENTRYHI: + v = (long)kvm_read_c0_guest_entryhi(cop0); + break; + case KVM_REG_MIPS_CP0_STATUS: + v = (long)kvm_read_c0_guest_status(cop0); + break; + case KVM_REG_MIPS_CP0_CAUSE: + v = (long)kvm_read_c0_guest_cause(cop0); + break; + case KVM_REG_MIPS_CP0_ERROREPC: + v = (long)kvm_read_c0_guest_errorepc(cop0); + break; + case KVM_REG_MIPS_CP0_CONFIG: + v = (long)kvm_read_c0_guest_config(cop0); + break; + case KVM_REG_MIPS_CP0_CONFIG1: + v = (long)kvm_read_c0_guest_config1(cop0); + break; + case KVM_REG_MIPS_CP0_CONFIG2: + v = (long)kvm_read_c0_guest_config2(cop0); + break; + case KVM_REG_MIPS_CP0_CONFIG3: + v = (long)kvm_read_c0_guest_config3(cop0); + break; + case KVM_REG_MIPS_CP0_CONFIG7: + v = (long)kvm_read_c0_guest_config7(cop0); + break; + default: + return -EINVAL; + } + return put_user(v, uaddr); +} + +static int kvm_mips_set_reg(struct kvm_vcpu *vcpu, + const struct kvm_one_reg *reg) +{ + u64 __user *uaddr = (u64 __user *)(long)reg->addr; + struct mips_coproc *cop0 = vcpu->arch.cop0; + u64 v; + + if (get_user(v, uaddr) != 0) + return -EFAULT; + + switch (reg->id) { + case KVM_REG_MIPS_R0: + /* Silently ignore requests to set $0 */ + break; + case KVM_REG_MIPS_R1 ... KVM_REG_MIPS_R31: + vcpu->arch.gprs[reg->id - KVM_REG_MIPS_R0] = v; + break; + case KVM_REG_MIPS_HI: + vcpu->arch.hi = v; + break; + case KVM_REG_MIPS_LO: + vcpu->arch.lo = v; + break; + case KVM_REG_MIPS_PC: + vcpu->arch.pc = v; + break; + + case KVM_REG_MIPS_CP0_INDEX: + kvm_write_c0_guest_index(cop0, v); + break; + case KVM_REG_MIPS_CP0_CONTEXT: + kvm_write_c0_guest_context(cop0, v); + break; + case KVM_REG_MIPS_CP0_PAGEMASK: + kvm_write_c0_guest_pagemask(cop0, v); + break; + case KVM_REG_MIPS_CP0_WIRED: + kvm_write_c0_guest_wired(cop0, v); + break; + case KVM_REG_MIPS_CP0_BADVADDR: + kvm_write_c0_guest_badvaddr(cop0, v); + break; + case KVM_REG_MIPS_CP0_ENTRYHI: + kvm_write_c0_guest_entryhi(cop0, v); + break; + case KVM_REG_MIPS_CP0_STATUS: + kvm_write_c0_guest_status(cop0, v); + break; + case KVM_REG_MIPS_CP0_CAUSE: + kvm_write_c0_guest_cause(cop0, v); + break; + case KVM_REG_MIPS_CP0_ERROREPC: + kvm_write_c0_guest_errorepc(cop0, v); + break; + default: + return -EINVAL; + } + return 0; +} + long kvm_arch_vcpu_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg) { struct kvm_vcpu *vcpu = filp->private_data; void __user *argp = (void __user *)arg; long r; - int intr; switch (ioctl) { + case KVM_SET_ONE_REG: + case KVM_GET_ONE_REG: { + struct kvm_one_reg reg; + if (copy_from_user(®, argp, sizeof(reg))) + return -EFAULT; + if (ioctl == KVM_SET_ONE_REG) + return kvm_mips_set_reg(vcpu, ®); + else + return kvm_mips_get_reg(vcpu, ®); + } + case KVM_GET_REG_LIST: { + struct kvm_reg_list __user *user_list = argp; + u64 __user *reg_dest; + struct kvm_reg_list reg_list; + unsigned n; + + if (copy_from_user(®_list, user_list, sizeof(reg_list))) + return -EFAULT; + n = reg_list.n; + reg_list.n = ARRAY_SIZE(kvm_mips_get_one_regs); + if (copy_to_user(user_list, ®_list, sizeof(reg_list))) + return -EFAULT; + if (n < reg_list.n) + return -E2BIG; + reg_dest = user_list->reg; + if (copy_to_user(reg_dest, kvm_mips_get_one_regs, + sizeof(kvm_mips_get_one_regs))) + return -EFAULT; + return 0; + } case KVM_NMI: /* Treat the NMI as a CPU reset */ r = kvm_mips_reset_vcpu(vcpu); @@ -505,8 +743,6 @@ kvm_arch_vcpu_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg) if (copy_from_user(&irq, argp, sizeof(irq))) goto out; - intr = (int)irq.irq; - kvm_debug("[%d] %s: irq: %d\n", vcpu->vcpu_id, __func__, irq.irq); @@ -514,7 +750,7 @@ kvm_arch_vcpu_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg) break; } default: - r = -EINVAL; + r = -ENOIOCTLCMD; } out: @@ -627,6 +863,9 @@ int kvm_dev_ioctl_check_extension(long ext) int r; switch (ext) { + case KVM_CAP_ONE_REG: + r = 1; + break; case KVM_CAP_COALESCED_MMIO: r = KVM_COALESCED_MMIO_PAGE_OFFSET; break; @@ -635,7 +874,6 @@ int kvm_dev_ioctl_check_extension(long ext) break; } return r; - } int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu) @@ -684,7 +922,7 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) vcpu->arch.lo = regs->lo; vcpu->arch.pc = regs->pc; - return kvm_mips_callbacks->vcpu_ioctl_set_regs(vcpu, regs); + return 0; } int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) @@ -698,7 +936,7 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) regs->lo = vcpu->arch.lo; regs->pc = vcpu->arch.pc; - return kvm_mips_callbacks->vcpu_ioctl_get_regs(vcpu, regs); + return 0; } void kvm_mips_comparecount_func(unsigned long data) diff --git a/arch/mips/kvm/kvm_trap_emul.c b/arch/mips/kvm/kvm_trap_emul.c index 466aeef..30d7253 100644 --- a/arch/mips/kvm/kvm_trap_emul.c +++ b/arch/mips/kvm/kvm_trap_emul.c @@ -345,54 +345,6 @@ static int kvm_trap_emul_handle_break(struct kvm_vcpu *vcpu) return ret; } -static int -kvm_trap_emul_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) -{ - struct mips_coproc *cop0 = vcpu->arch.cop0; - - kvm_write_c0_guest_index(cop0, regs->cp0reg[MIPS_CP0_TLB_INDEX][0]); - kvm_write_c0_guest_context(cop0, regs->cp0reg[MIPS_CP0_TLB_CONTEXT][0]); - kvm_write_c0_guest_badvaddr(cop0, regs->cp0reg[MIPS_CP0_BAD_VADDR][0]); - kvm_write_c0_guest_entryhi(cop0, regs->cp0reg[MIPS_CP0_TLB_HI][0]); - kvm_write_c0_guest_epc(cop0, regs->cp0reg[MIPS_CP0_EXC_PC][0]); - - kvm_write_c0_guest_status(cop0, regs->cp0reg[MIPS_CP0_STATUS][0]); - kvm_write_c0_guest_cause(cop0, regs->cp0reg[MIPS_CP0_CAUSE][0]); - kvm_write_c0_guest_pagemask(cop0, - regs->cp0reg[MIPS_CP0_TLB_PG_MASK][0]); - kvm_write_c0_guest_wired(cop0, regs->cp0reg[MIPS_CP0_TLB_WIRED][0]); - kvm_write_c0_guest_errorepc(cop0, regs->cp0reg[MIPS_CP0_ERROR_PC][0]); - - return 0; -} - -static int -kvm_trap_emul_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) -{ - struct mips_coproc *cop0 = vcpu->arch.cop0; - - regs->cp0reg[MIPS_CP0_TLB_INDEX][0] = kvm_read_c0_guest_index(cop0); - regs->cp0reg[MIPS_CP0_TLB_CONTEXT][0] = kvm_read_c0_guest_context(cop0); - regs->cp0reg[MIPS_CP0_BAD_VADDR][0] = kvm_read_c0_guest_badvaddr(cop0); - regs->cp0reg[MIPS_CP0_TLB_HI][0] = kvm_read_c0_guest_entryhi(cop0); - regs->cp0reg[MIPS_CP0_EXC_PC][0] = kvm_read_c0_guest_epc(cop0); - - regs->cp0reg[MIPS_CP0_STATUS][0] = kvm_read_c0_guest_status(cop0); - regs->cp0reg[MIPS_CP0_CAUSE][0] = kvm_read_c0_guest_cause(cop0); - regs->cp0reg[MIPS_CP0_TLB_PG_MASK][0] = - kvm_read_c0_guest_pagemask(cop0); - regs->cp0reg[MIPS_CP0_TLB_WIRED][0] = kvm_read_c0_guest_wired(cop0); - regs->cp0reg[MIPS_CP0_ERROR_PC][0] = kvm_read_c0_guest_errorepc(cop0); - - regs->cp0reg[MIPS_CP0_CONFIG][0] = kvm_read_c0_guest_config(cop0); - regs->cp0reg[MIPS_CP0_CONFIG][1] = kvm_read_c0_guest_config1(cop0); - regs->cp0reg[MIPS_CP0_CONFIG][2] = kvm_read_c0_guest_config2(cop0); - regs->cp0reg[MIPS_CP0_CONFIG][3] = kvm_read_c0_guest_config3(cop0); - regs->cp0reg[MIPS_CP0_CONFIG][7] = kvm_read_c0_guest_config7(cop0); - - return 0; -} - static int kvm_trap_emul_vm_init(struct kvm *kvm) { return 0; @@ -471,8 +423,6 @@ static struct kvm_mips_callbacks kvm_trap_emul_callbacks = { .dequeue_io_int = kvm_mips_dequeue_io_int_cb, .irq_deliver = kvm_mips_irq_deliver_cb, .irq_clear = kvm_mips_irq_clear_cb, - .vcpu_ioctl_get_regs = kvm_trap_emul_ioctl_get_regs, - .vcpu_ioctl_set_regs = kvm_trap_emul_ioctl_set_regs, }; int kvm_mips_emulation_init(struct kvm_mips_callbacks **install_callbacks) -- cgit v0.10.2 From ed829857b36bc0155d85b661ab227df57ac898f3 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 23 May 2013 09:49:10 -0700 Subject: mips/kvm: Use ENOIOCTLCMD to indicate unimplemented ioctls. The Linux Way is to return -ENOIOCTLCMD to the vfs when an unimplemented ioctl is requested. Do this in kvm_mips instead of a random mixture of -ENOTSUPP and -EINVAL. Signed-off-by: David Daney Acked-by: Sanjay Lal Signed-off-by: Paolo Bonzini diff --git a/arch/mips/kvm/kvm_mips.c b/arch/mips/kvm/kvm_mips.c index 3caa006..d934b01 100644 --- a/arch/mips/kvm/kvm_mips.c +++ b/arch/mips/kvm/kvm_mips.c @@ -195,7 +195,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm) long kvm_arch_dev_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg) { - return -EINVAL; + return -ENOIOCTLCMD; } void kvm_arch_free_memslot(struct kvm_memory_slot *free, @@ -401,7 +401,7 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu, struct kvm_guest_debug *dbg) { - return -EINVAL; + return -ENOIOCTLCMD; } int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) @@ -475,14 +475,14 @@ int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu, struct kvm_mp_state *mp_state) { - return -EINVAL; + return -ENOIOCTLCMD; } int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu, struct kvm_mp_state *mp_state) { - return -EINVAL; + return -ENOIOCTLCMD; } #define KVM_REG_MIPS_CP0_INDEX (0x10000 + 8 * 0 + 0) @@ -801,7 +801,7 @@ long kvm_arch_vm_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg) switch (ioctl) { default: - r = -EINVAL; + r = -ENOIOCTLCMD; } return r; @@ -829,13 +829,13 @@ void kvm_arch_exit(void) int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu, struct kvm_sregs *sregs) { - return -ENOTSUPP; + return -ENOIOCTLCMD; } int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu, struct kvm_sregs *sregs) { - return -ENOTSUPP; + return -ENOIOCTLCMD; } int kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu) @@ -845,12 +845,12 @@ int kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu) int kvm_arch_vcpu_ioctl_get_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu) { - return -ENOTSUPP; + return -ENOIOCTLCMD; } int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu) { - return -ENOTSUPP; + return -ENOIOCTLCMD; } int kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf) -- cgit v0.10.2 From e8180dcaa8470ceca21109f143876fdcd9fe050a Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Thu, 9 May 2013 00:28:06 +0200 Subject: ARM: KVM: prevent NULL pointer dereferences with KVM VCPU ioctl Some ARM KVM VCPU ioctls require the vCPU to be properly initialized with the KVM_ARM_VCPU_INIT ioctl before being used with further requests. KVM_RUN checks whether this initialization has been done, but other ioctls do not. Namely KVM_GET_REG_LIST will dereference an array with index -1 without initialization and thus leads to a kernel oops. Fix this by adding checks before executing the ioctl handlers. [ Removed superflous comment from static function - Christoffer ] Changes from v1: * moved check into a static function with a meaningful name Signed-off-by: Andre Przywara Signed-off-by: Christoffer Dall diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 37d216d..ef1703b 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -492,6 +492,11 @@ static void vcpu_pause(struct kvm_vcpu *vcpu) wait_event_interruptible(*wq, !vcpu->arch.pause); } +static int kvm_vcpu_initialized(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.target >= 0; +} + /** * kvm_arch_vcpu_ioctl_run - the main VCPU run function to execute guest code * @vcpu: The VCPU pointer @@ -508,8 +513,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) int ret; sigset_t sigsaved; - /* Make sure they initialize the vcpu with KVM_ARM_VCPU_INIT */ - if (unlikely(vcpu->arch.target < 0)) + if (unlikely(!kvm_vcpu_initialized(vcpu))) return -ENOEXEC; ret = kvm_vcpu_first_run_init(vcpu); @@ -710,6 +714,10 @@ long kvm_arch_vcpu_ioctl(struct file *filp, case KVM_SET_ONE_REG: case KVM_GET_ONE_REG: { struct kvm_one_reg reg; + + if (unlikely(!kvm_vcpu_initialized(vcpu))) + return -ENOEXEC; + if (copy_from_user(®, argp, sizeof(reg))) return -EFAULT; if (ioctl == KVM_SET_ONE_REG) @@ -722,6 +730,9 @@ long kvm_arch_vcpu_ioctl(struct file *filp, struct kvm_reg_list reg_list; unsigned n; + if (unlikely(!kvm_vcpu_initialized(vcpu))) + return -ENOEXEC; + if (copy_from_user(®_list, user_list, sizeof(reg_list))) return -EFAULT; n = reg_list.n; -- cgit v0.10.2 From d4cb9df5d1f79950b34e78ec5d1b1b59d6e9c7b7 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 14 May 2013 12:11:34 +0100 Subject: ARM: KVM: be more thorough when invalidating TLBs The KVM/ARM MMU code doesn't take care of invalidating TLBs before freeing a {pte,pmd} table. This could cause problems if the page is reallocated and then speculated into by another CPU. Reported-by: Catalin Marinas Signed-off-by: Marc Zyngier Acked-by: Catalin Marinas Signed-off-by: Christoffer Dall diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index 9657065..84ba67b 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -43,7 +43,14 @@ static phys_addr_t hyp_idmap_vector; static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa) { - kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, kvm, ipa); + /* + * This function also gets called when dealing with HYP page + * tables. As HYP doesn't have an associated struct kvm (and + * the HYP page tables are fairly static), we don't do + * anything there. + */ + if (kvm) + kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, kvm, ipa); } static int mmu_topup_memory_cache(struct kvm_mmu_memory_cache *cache, @@ -78,18 +85,20 @@ static void *mmu_memory_cache_alloc(struct kvm_mmu_memory_cache *mc) return p; } -static void clear_pud_entry(pud_t *pud) +static void clear_pud_entry(struct kvm *kvm, pud_t *pud, phys_addr_t addr) { pmd_t *pmd_table = pmd_offset(pud, 0); pud_clear(pud); + kvm_tlb_flush_vmid_ipa(kvm, addr); pmd_free(NULL, pmd_table); put_page(virt_to_page(pud)); } -static void clear_pmd_entry(pmd_t *pmd) +static void clear_pmd_entry(struct kvm *kvm, pmd_t *pmd, phys_addr_t addr) { pte_t *pte_table = pte_offset_kernel(pmd, 0); pmd_clear(pmd); + kvm_tlb_flush_vmid_ipa(kvm, addr); pte_free_kernel(NULL, pte_table); put_page(virt_to_page(pmd)); } @@ -100,11 +109,12 @@ static bool pmd_empty(pmd_t *pmd) return page_count(pmd_page) == 1; } -static void clear_pte_entry(pte_t *pte) +static void clear_pte_entry(struct kvm *kvm, pte_t *pte, phys_addr_t addr) { if (pte_present(*pte)) { kvm_set_pte(pte, __pte(0)); put_page(virt_to_page(pte)); + kvm_tlb_flush_vmid_ipa(kvm, addr); } } @@ -114,7 +124,8 @@ static bool pte_empty(pte_t *pte) return page_count(pte_page) == 1; } -static void unmap_range(pgd_t *pgdp, unsigned long long start, u64 size) +static void unmap_range(struct kvm *kvm, pgd_t *pgdp, + unsigned long long start, u64 size) { pgd_t *pgd; pud_t *pud; @@ -138,15 +149,15 @@ static void unmap_range(pgd_t *pgdp, unsigned long long start, u64 size) } pte = pte_offset_kernel(pmd, addr); - clear_pte_entry(pte); + clear_pte_entry(kvm, pte, addr); range = PAGE_SIZE; /* If we emptied the pte, walk back up the ladder */ if (pte_empty(pte)) { - clear_pmd_entry(pmd); + clear_pmd_entry(kvm, pmd, addr); range = PMD_SIZE; if (pmd_empty(pmd)) { - clear_pud_entry(pud); + clear_pud_entry(kvm, pud, addr); range = PUD_SIZE; } } @@ -165,14 +176,14 @@ void free_boot_hyp_pgd(void) mutex_lock(&kvm_hyp_pgd_mutex); if (boot_hyp_pgd) { - unmap_range(boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE); - unmap_range(boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); + unmap_range(NULL, boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE); + unmap_range(NULL, boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); kfree(boot_hyp_pgd); boot_hyp_pgd = NULL; } if (hyp_pgd) - unmap_range(hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); + unmap_range(NULL, hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); kfree(init_bounce_page); init_bounce_page = NULL; @@ -200,9 +211,10 @@ void free_hyp_pgds(void) if (hyp_pgd) { for (addr = PAGE_OFFSET; virt_addr_valid(addr); addr += PGDIR_SIZE) - unmap_range(hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE); + unmap_range(NULL, hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE); for (addr = VMALLOC_START; is_vmalloc_addr((void*)addr); addr += PGDIR_SIZE) - unmap_range(hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE); + unmap_range(NULL, hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE); + kfree(hyp_pgd); hyp_pgd = NULL; } @@ -393,7 +405,7 @@ int kvm_alloc_stage2_pgd(struct kvm *kvm) */ static void unmap_stage2_range(struct kvm *kvm, phys_addr_t start, u64 size) { - unmap_range(kvm->arch.pgd, start, size); + unmap_range(kvm, kvm->arch.pgd, start, size); } /** @@ -675,7 +687,6 @@ static void handle_hva_to_gpa(struct kvm *kvm, static void kvm_unmap_hva_handler(struct kvm *kvm, gpa_t gpa, void *data) { unmap_stage2_range(kvm, gpa, PAGE_SIZE); - kvm_tlb_flush_vmid_ipa(kvm, gpa); } int kvm_unmap_hva(struct kvm *kvm, unsigned long hva) -- cgit v0.10.2 From 103f98ea64a1b0a67d8a1b23070b4db3533db2b8 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 30 May 2013 13:22:39 +0200 Subject: KVM: Emulate multibyte NOP This is encountered when booting RHEL5.9 64-bit. There is another bug after this one that is not a simple emulation failure, but this one lets the boot proceed a bit. Cc: # 3.9 Signed-off-by: Paolo Bonzini Signed-off-by: Gleb Natapov diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index 8db0010..0f42c2a 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -3997,7 +3997,8 @@ static const struct opcode twobyte_table[256] = { DI(ImplicitOps | Priv, invd), DI(ImplicitOps | Priv, wbinvd), N, N, N, D(ImplicitOps | ModRM), N, N, /* 0x10 - 0x1F */ - N, N, N, N, N, N, N, N, D(ImplicitOps | ModRM), N, N, N, N, N, N, N, + N, N, N, N, N, N, N, N, + D(ImplicitOps | ModRM), N, N, N, N, N, N, D(ImplicitOps | ModRM), /* 0x20 - 0x2F */ DIP(ModRM | DstMem | Priv | Op3264, cr_read, check_cr_read), DIP(ModRM | DstMem | Priv | Op3264, dr_read, check_dr_read), @@ -4836,6 +4837,7 @@ twobyte_insn: case 0x08: /* invd */ case 0x0d: /* GrpP (prefetch) */ case 0x18: /* Grp16 (prefetch/nop) */ + case 0x1f: /* nop */ break; case 0x20: /* mov cr, reg */ ctxt->dst.val = ops->get_cr(ctxt, ctxt->modrm_reg); -- cgit v0.10.2 From 8acb42070ec4c87a9baab5c7bac626030d5bef28 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 30 May 2013 16:35:55 +0200 Subject: KVM: fix sil/dil/bpl/spl in the mod/rm fields The x86-64 extended low-byte registers were fetched correctly from reg, but not from mod/rm. This fixes another bug in the boot of RHEL5.9 64-bit, but it is still not enough. Cc: # 3.9 Signed-off-by: Paolo Bonzini Signed-off-by: Gleb Natapov diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index 0f42c2a..5953dce 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -1240,9 +1240,12 @@ static int decode_modrm(struct x86_emulate_ctxt *ctxt, ctxt->modrm_seg = VCPU_SREG_DS; if (ctxt->modrm_mod == 3) { + int highbyte_regs = ctxt->rex_prefix == 0; + op->type = OP_REG; op->bytes = (ctxt->d & ByteOp) ? 1 : ctxt->op_bytes; - op->addr.reg = decode_register(ctxt, ctxt->modrm_rm, ctxt->d & ByteOp); + op->addr.reg = decode_register(ctxt, ctxt->modrm_rm, + highbyte_regs && (ctxt->d & ByteOp)); if (ctxt->d & Sse) { op->type = OP_XMM; op->bytes = 16; -- cgit v0.10.2 From 299018f44ac553dce3caf84df1d14c4764faa279 Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Mon, 3 Jun 2013 11:30:02 +0300 Subject: KVM: Fix race in apic->pending_events processing apic->pending_events processing has a race that may cause INIT and SIPI processing to be reordered: vpu0: vcpu1: set INIT test_and_clear_bit(KVM_APIC_INIT) process INIT set INIT set SIPI test_and_clear_bit(KVM_APIC_SIPI) process SIPI At the end INIT is left pending in pending_events. The following patch fixes this by latching pending event before processing them. Signed-off-by: Gleb Natapov diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index e1adbb4..0eee2c8 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -1861,11 +1861,14 @@ void kvm_apic_accept_events(struct kvm_vcpu *vcpu) { struct kvm_lapic *apic = vcpu->arch.apic; unsigned int sipi_vector; + unsigned long pe; - if (!kvm_vcpu_has_lapic(vcpu)) + if (!kvm_vcpu_has_lapic(vcpu) || !apic->pending_events) return; - if (test_and_clear_bit(KVM_APIC_INIT, &apic->pending_events)) { + pe = xchg(&apic->pending_events, 0); + + if (test_bit(KVM_APIC_INIT, &pe)) { kvm_lapic_reset(vcpu); kvm_vcpu_reset(vcpu); if (kvm_vcpu_is_bsp(apic->vcpu)) @@ -1873,7 +1876,7 @@ void kvm_apic_accept_events(struct kvm_vcpu *vcpu) else vcpu->arch.mp_state = KVM_MP_STATE_INIT_RECEIVED; } - if (test_and_clear_bit(KVM_APIC_SIPI, &apic->pending_events) && + if (test_bit(KVM_APIC_SIPI, &pe) && vcpu->arch.mp_state == KVM_MP_STATE_INIT_RECEIVED) { /* evaluate pending_events before reading the vector */ smp_rmb(); -- cgit v0.10.2 From 8706a6b6303dd75c7ee2baf2161de0f5a2fbdd8b Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 30 May 2013 15:10:52 +0200 Subject: microblaze: Fix sparse warnings arch/microblaze/include/asm/uaccess.h:101:3: warning: cast removes address space of expression arch/microblaze/include/asm/uaccess.h:107:2: warning: cast removes address space of expression Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h index efe59d8..04e4955 100644 --- a/arch/microblaze/include/asm/uaccess.h +++ b/arch/microblaze/include/asm/uaccess.h @@ -99,13 +99,13 @@ static inline int access_ok(int type, const void __user *addr, if ((get_fs().seg < ((unsigned long)addr)) || (get_fs().seg < ((unsigned long)addr + size - 1))) { pr_debug("ACCESS fail: %s at 0x%08x (size 0x%x), seg 0x%08x\n", - type ? "WRITE" : "READ ", (u32)addr, (u32)size, + type ? "WRITE" : "READ ", (__force u32)addr, (u32)size, (u32)get_fs().seg); return 0; } ok: pr_debug("ACCESS OK: %s at 0x%08x (size 0x%x), seg 0x%08x\n", - type ? "WRITE" : "READ ", (u32)addr, (u32)size, + type ? "WRITE" : "READ ", (__force u32)addr, (u32)size, (u32)get_fs().seg); return 1; } -- cgit v0.10.2 From 056790923e1c4eed5d8cc502e1092944a2b23025 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 1 Jun 2013 23:13:53 +0100 Subject: ASoC: pcm: Require both CODEC and CPU support when declaring stream caps When declaring playback and capture capabilities check for both CODEC side and CPU side support rather than only checking for CODEC side support. While it is unusual some CPUs do have unidirectional DAIs. Reported-by: Fabio Estevam Tested-by: Fabio Estevam Acked-by: Liam Girdwood Signed-off-by: Mark Brown diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 73bb8ee..a9fddf0 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -2011,9 +2011,11 @@ int soc_new_pcm(struct snd_soc_pcm_runtime *rtd, int num) if (cpu_dai->driver->capture.channels_min) capture = 1; } else { - if (codec_dai->driver->playback.channels_min) + if (codec_dai->driver->playback.channels_min && + cpu_dai->driver->playback.channels_min) playback = 1; - if (codec_dai->driver->capture.channels_min) + if (codec_dai->driver->capture.channels_min && + cpu_dai->driver->capture.channels_min) capture = 1; } -- cgit v0.10.2 From b7ea85a4fed37835eec78a7be3039c8dc22b8178 Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Tue, 21 May 2013 06:23:43 +0000 Subject: drm: fix a use-after-free when GPU acceleration disabled MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When GPU acceleration is disabled, drm_vblank_cleanup() will free the vblank-related data, such as vblank_refcount, vblank_inmodeset, etc. But we found that drm_vblank_post_modeset() may be called after the cleanup, which use vblank_refcount and vblank_inmodeset. And this will cause a kernel panic. Fix this by return immediately if dev->num_crtcs is zero. This is the same thing that drm_vblank_pre_modeset() does. Call trace of a drm_vblank_post_modeset() after drm_vblank_cleanup(): [ 62.628906] [] drm_vblank_post_modeset+0x34/0xb4 [ 62.628906] [] atombios_crtc_dpms+0xb4/0x174 [ 62.628906] [] atombios_crtc_commit+0x18/0x38 [ 62.628906] [] drm_crtc_helper_set_mode+0x304/0x3cc [ 62.628906] [] drm_crtc_helper_set_config+0x6d8/0x988 [ 62.628906] [] drm_fb_helper_set_par+0x94/0x104 [ 62.628906] [] fbcon_init+0x424/0x57c [ 62.628906] [] visual_init+0xb8/0x118 [ 62.628906] [] take_over_console+0x238/0x384 [ 62.628906] [] fbcon_takeover+0x7c/0xdc [ 62.628906] [] notifier_call_chain+0x44/0x94 [ 62.628906] [] __blocking_notifier_call_chain+0x48/0x68 [ 62.628906] [] register_framebuffer+0x228/0x260 [ 62.628906] [] drm_fb_helper_single_fb_probe+0x260/0x314 [ 62.628906] [] drm_fb_helper_initial_config+0x200/0x234 [ 62.628906] [] radeon_fbdev_init+0xd4/0xf4 [ 62.628906] [] radeon_modeset_init+0x9bc/0xa18 [ 62.628906] [] radeon_driver_load_kms+0xdc/0x12c [ 62.628906] [] drm_get_pci_dev+0x148/0x238 [ 62.628906] [] local_pci_probe+0x5c/0xd0 [ 62.628906] [] work_for_cpu_fn+0x1c/0x30 [ 62.628906] [] process_one_work+0x274/0x3bc [ 62.628906] [] process_scheduled_works+0x24/0x44 [ 62.628906] [] worker_thread+0x31c/0x3f4 [ 62.628906] [] kthread+0x88/0x90 [ 62.628906] [] kernel_thread_helper+0x10/0x18 Signed-off-by: Huacai Chen Signed-off-by: Binbin Zhou Cc: Reviewed-by: Michel Dänzer Acked-by: Paul Menzel Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index a6a8643..8bcce78 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -1054,7 +1054,7 @@ EXPORT_SYMBOL(drm_vblank_off); */ void drm_vblank_pre_modeset(struct drm_device *dev, int crtc) { - /* vblank is not initialized (IRQ not installed ?) */ + /* vblank is not initialized (IRQ not installed ?), or has been freed */ if (!dev->num_crtcs) return; /* @@ -1076,6 +1076,10 @@ void drm_vblank_post_modeset(struct drm_device *dev, int crtc) { unsigned long irqflags; + /* vblank is not initialized (IRQ not installed ?), or has been freed */ + if (!dev->num_crtcs) + return; + if (dev->vblank_inmodeset[crtc]) { spin_lock_irqsave(&dev->vbl_lock, irqflags); dev->vblank_disable_allowed = 1; -- cgit v0.10.2 From 1ed7fad6dbb211142cb61169d8d0bbbb049d4de1 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 31 May 2013 22:22:47 +0000 Subject: drm/tilcd: select BACKLIGHT_LCD_SUPPORT The dependecies for BACKLIGHT_CLASS_DEVICE are defined a bit strange, but it seems one has to always select both BACKLIGHT_CLASS_DEVICE and BACKLIGHT_LCD_SUPPORT to avoid this error: drivers/gpu/drm/tilcdc/tilcdc_panel.c:396: undefined reference to `of_find_backlight_by_node' Cc: Rob Clark Cc: dri-devel@lists.freedesktop.org Cc: Dave Airlie Signed-off-by: Arnd Bergmann Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/tilcdc/Kconfig b/drivers/gpu/drm/tilcdc/Kconfig index e461e99..7a4d101 100644 --- a/drivers/gpu/drm/tilcdc/Kconfig +++ b/drivers/gpu/drm/tilcdc/Kconfig @@ -6,6 +6,7 @@ config DRM_TILCDC select DRM_GEM_CMA_HELPER select VIDEOMODE_HELPERS select BACKLIGHT_CLASS_DEVICE + select BACKLIGHT_LCD_SUPPORT help Choose this option if you have an TI SoC with LCDC display controller, for example AM33xx in beagle-bone, DA8xx, or -- cgit v0.10.2 From b06f6a9d06f4b0fa38bd3e32714106d824470813 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 31 May 2013 22:22:40 +0000 Subject: drm/nouveau: use mdelay instead of large udelay constants ARM cannot handle udelay for more than 2 miliseconds, so we should use mdelay instead for those. Signed-off-by: Arnd Bergmann Cc: David Airlie Cc: Ben Skeggs Cc: dri-devel@lists.freedesktop.org Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/nouveau/core/engine/disp/dacnv50.c b/drivers/gpu/drm/nouveau/core/engine/disp/dacnv50.c index d0817d9..ed7415e 100644 --- a/drivers/gpu/drm/nouveau/core/engine/disp/dacnv50.c +++ b/drivers/gpu/drm/nouveau/core/engine/disp/dacnv50.c @@ -51,7 +51,8 @@ nv50_dac_sense(struct nv50_disp_priv *priv, int or, u32 loadval) const u32 doff = (or * 0x800); int load = -EINVAL; nv_wr32(priv, 0x61a00c + doff, 0x00100000 | loadval); - udelay(9500); + mdelay(9); + udelay(500); nv_wr32(priv, 0x61a00c + doff, 0x80000000); load = (nv_rd32(priv, 0x61a00c + doff) & 0x38000000) >> 27; nv_wr32(priv, 0x61a00c + doff, 0x00000000); -- cgit v0.10.2 From 91f8f105f2b82b4a38dee2d74760bc39d40ec42c Mon Sep 17 00:00:00 2001 From: Christopher Harvey Date: Fri, 31 May 2013 20:33:07 +0000 Subject: drm/mgag200: Add missing write to index before accessing data register This is a bug fix for some versions of g200se cards while doing mode-setting. Signed-off-by: Christopher Harvey Tested-by: Julia Lemire Acked-by: Julia Lemire Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c index 77b8a45..ee66bad 100644 --- a/drivers/gpu/drm/mgag200/mgag200_mode.c +++ b/drivers/gpu/drm/mgag200/mgag200_mode.c @@ -1034,13 +1034,14 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc, else hi_pri_lvl = 5; - WREG8(0x1fde, 0x06); - WREG8(0x1fdf, hi_pri_lvl); + WREG8(MGAREG_CRTCEXT_INDEX, 0x06); + WREG8(MGAREG_CRTCEXT_DATA, hi_pri_lvl); } else { + WREG8(MGAREG_CRTCEXT_INDEX, 0x06); if (mdev->reg_1e24 >= 0x01) - WREG8(0x1fdf, 0x03); + WREG8(MGAREG_CRTCEXT_DATA, 0x03); else - WREG8(0x1fdf, 0x04); + WREG8(MGAREG_CRTCEXT_DATA, 0x04); } } return 0; -- cgit v0.10.2 From 768dc16397fb18c9de209cbcb84d890b8279faa7 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 28 May 2013 17:17:45 +0200 Subject: arm: omap2: fix AM33xx hwmod infos for UART2 The UART2 hwmod structure is pointing to the EDMA channels of UART1, which doesn't look right. This patch fixes this by making the UART2 hwmod structure to a new structure that lists the EDMA channels to be used by the UART2. Signed-off-by: Thomas Petazzoni Acked-by: Vaibhav Hiremath [paul@pwsan.com: updated to apply] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 075f7cc..69337af 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -2007,6 +2007,13 @@ static struct omap_hwmod am33xx_uart1_hwmod = { }, }; +/* uart2 */ +static struct omap_hwmod_dma_info uart2_edma_reqs[] = { + { .name = "tx", .dma_req = 28, }, + { .name = "rx", .dma_req = 29, }, + { .dma_req = -1 } +}; + static struct omap_hwmod_irq_info am33xx_uart2_irqs[] = { { .irq = 73 + OMAP_INTC_START, }, { .irq = -1 }, @@ -2018,7 +2025,7 @@ static struct omap_hwmod am33xx_uart2_hwmod = { .clkdm_name = "l4ls_clkdm", .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart2_irqs, - .sdma_reqs = uart1_edma_reqs, + .sdma_reqs = uart2_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", .prcm = { .omap4 = { -- cgit v0.10.2 From 087c2e3b4e062573dbbc8a50b9208992e3768dcf Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 31 May 2013 13:54:10 +0200 Subject: ALSA: hda/via - Disable broken dynamic power control Since the transition to the generic parser, the actual routes used there don't match always with the assumed static paths in some set_widgets_power_state callbacks. This results in the wrong power setup in the end. As a temporary workaround, we need to disable the calls together with the non-functional dynamic power control enum. Reported-by: Alex Riesen Cc: [v3.9] Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c index e0dadcf..75fdb51 100644 --- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -231,9 +231,14 @@ static void vt1708_update_hp_work(struct hda_codec *codec) static void set_widgets_power_state(struct hda_codec *codec) { +#if 0 /* FIXME: the assumed connections don't match always with the + * actual routes by the generic parser, so better to disable + * the control for safety. + */ struct via_spec *spec = codec->spec; if (spec->set_widgets_power_state) spec->set_widgets_power_state(codec); +#endif } static void update_power_state(struct hda_codec *codec, hda_nid_t nid, -- cgit v0.10.2 From 77afe0e94884ae40de29cd813a1fb7ddee583591 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 31 May 2013 14:10:03 +0200 Subject: ALSA: hda - Allow setting automute/automic hooks after parsing Some codec drivers (VIA codecs and some Realtek fixups) set the automute and automic hooks after calling snd_hda_gen_parse_auto_config(). In the current code, the hook pointers are referred only in snd_hda_gen_parse_auto_config() and passed to snd_hda_jack_detect_enable_callback(), thus changing the hook values won't change the actually called callbacks properly. This patch fixes this bug by setting the static functions as the primary callback functions for the jack detection, and let them calling the appropriate hooks dynamically. Cc: [v3.9] Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index ae85bbd2..fbc10b6 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -3875,6 +3875,36 @@ static void update_automute_all(struct hda_codec *codec) snd_hda_gen_mic_autoswitch(codec, NULL); } +/* call appropriate hooks */ +static void call_hp_automute(struct hda_codec *codec, struct hda_jack_tbl *jack) +{ + struct hda_gen_spec *spec = codec->spec; + if (spec->hp_automute_hook) + spec->hp_automute_hook(codec, jack); + else + snd_hda_gen_hp_automute(codec, jack); +} + +static void call_line_automute(struct hda_codec *codec, + struct hda_jack_tbl *jack) +{ + struct hda_gen_spec *spec = codec->spec; + if (spec->line_automute_hook) + spec->line_automute_hook(codec, jack); + else + snd_hda_gen_line_automute(codec, jack); +} + +static void call_mic_autoswitch(struct hda_codec *codec, + struct hda_jack_tbl *jack) +{ + struct hda_gen_spec *spec = codec->spec; + if (spec->mic_autoswitch_hook) + spec->mic_autoswitch_hook(codec, jack); + else + snd_hda_gen_mic_autoswitch(codec, jack); +} + /* * Auto-Mute mode mixer enum support */ @@ -4009,9 +4039,7 @@ static int check_auto_mute_availability(struct hda_codec *codec) snd_printdd("hda-codec: Enable HP auto-muting on NID 0x%x\n", nid); snd_hda_jack_detect_enable_callback(codec, nid, HDA_GEN_HP_EVENT, - spec->hp_automute_hook ? - spec->hp_automute_hook : - snd_hda_gen_hp_automute); + call_hp_automute); spec->detect_hp = 1; } @@ -4024,9 +4052,7 @@ static int check_auto_mute_availability(struct hda_codec *codec) snd_printdd("hda-codec: Enable Line-Out auto-muting on NID 0x%x\n", nid); snd_hda_jack_detect_enable_callback(codec, nid, HDA_GEN_FRONT_EVENT, - spec->line_automute_hook ? - spec->line_automute_hook : - snd_hda_gen_line_automute); + call_line_automute); spec->detect_lo = 1; } spec->automute_lo_possible = spec->detect_hp; @@ -4068,9 +4094,7 @@ static bool auto_mic_check_imux(struct hda_codec *codec) snd_hda_jack_detect_enable_callback(codec, spec->am_entry[i].pin, HDA_GEN_MIC_EVENT, - spec->mic_autoswitch_hook ? - spec->mic_autoswitch_hook : - snd_hda_gen_mic_autoswitch); + call_mic_autoswitch); return true; } -- cgit v0.10.2 From 05909d5c679cf7c9a8a5bc663677c066a546894f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 31 May 2013 19:55:54 +0200 Subject: ALSA: hda - Add keep_eapd_on flag to generic parser VT1802 codec seems to reset EAPD of other pins in the hardware level, and this was another reason of the silent headphone output on some machines. As a workaround, introduce a new flag indicating to keep the EPAD on to the generic parser, and set it in patch_via.c. Reported-by: Alex Riesen Cc: [v3.9] Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index fbc10b6..cfdb917 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -788,6 +788,8 @@ static void set_pin_eapd(struct hda_codec *codec, hda_nid_t pin, bool enable) return; if (codec->inv_eapd) enable = !enable; + if (spec->keep_eapd_on && !enable) + return; snd_hda_codec_update_cache(codec, pin, 0, AC_VERB_SET_EAPD_BTLENABLE, enable ? 0x02 : 0x00); diff --git a/sound/pci/hda/hda_generic.h b/sound/pci/hda/hda_generic.h index 54e6651..7620031 100644 --- a/sound/pci/hda/hda_generic.h +++ b/sound/pci/hda/hda_generic.h @@ -222,6 +222,7 @@ struct hda_gen_spec { unsigned int multi_cap_vol:1; /* allow multiple capture xxx volumes */ unsigned int inv_dmic_split:1; /* inverted dmic w/a for conexant */ unsigned int own_eapd_ctl:1; /* set EAPD by own function */ + unsigned int keep_eapd_on:1; /* don't turn off EAPD automatically */ unsigned int vmaster_mute_enum:1; /* add vmaster mute mode enum */ unsigned int indep_hp:1; /* independent HP supported */ unsigned int prefer_hp_amp:1; /* enable HP amp for speaker if any */ diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c index 75fdb51..a6c3856 100644 --- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -136,6 +136,7 @@ static struct via_spec *via_new_spec(struct hda_codec *codec) spec->codec_type = VT1708S; spec->no_pin_power_ctl = 1; spec->gen.indep_hp = 1; + spec->gen.keep_eapd_on = 1; spec->gen.pcm_playback_hook = via_playback_pcm_hook; return spec; } -- cgit v0.10.2 From 5a6f294e87974e6ec68d7113553ffd975d83bf15 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 3 Jun 2013 11:17:38 +0200 Subject: ALSA: hda/via - Fix wrongly cleared pins after suspend on VT1802 VIA driver has a special suspend handling only for VT1802 to reduce the pop noise. During the transition to the generic parser, the behavior of snd_hda_set_pin_ctl() was also changed to modify the cached values, too. And this caused a regression where the pin is still cleared even after the resume (including the resume from power save), resulting in the silent output. The fix is simply to replace snd_hda_set_pin_ctl() with the explicit call of snd_hda_codec_write() again. Reported-by: Alex Riesen Cc: [v3.9] Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c index a6c3856..e524554 100644 --- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -484,7 +484,9 @@ static int via_suspend(struct hda_codec *codec) /* Fix pop noise on headphones */ int i; for (i = 0; i < spec->gen.autocfg.hp_outs; i++) - snd_hda_set_pin_ctl(codec, spec->gen.autocfg.hp_pins[i], 0); + snd_hda_codec_write(codec, spec->gen.autocfg.hp_pins[i], + 0, AC_VERB_SET_PIN_WIDGET_CONTROL, + 0x00); } return 0; -- cgit v0.10.2 From 62bc82a82bb1e2b5ee5048c088af7260ddb2b7b5 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 3 Jun 2013 11:30:04 +0200 Subject: microblaze: Use static inline functions in cacheflush.h Using static inline functions ensure proper type checking which also remove compilation warning for no MMU Compilation warning: arch/microblaze/include/asm/cacheflush.h: warning: 'addr' may be used uninitialized in this function [-Wmaybe-uninitialized] Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/cacheflush.h b/arch/microblaze/include/asm/cacheflush.h index 0f553bc..ffea82a 100644 --- a/arch/microblaze/include/asm/cacheflush.h +++ b/arch/microblaze/include/asm/cacheflush.h @@ -102,21 +102,23 @@ do { \ #define flush_cache_range(vma, start, len) do { } while (0) -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ -do { \ - u32 addr = virt_to_phys(dst); \ - memcpy((dst), (src), (len)); \ - if (vma->vm_flags & VM_EXEC) { \ - invalidate_icache_range((unsigned) (addr), \ - (unsigned) (addr) + PAGE_SIZE); \ - flush_dcache_range((unsigned) (addr), \ - (unsigned) (addr) + PAGE_SIZE); \ - } \ -} while (0) - -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ -do { \ - memcpy((dst), (src), (len)); \ -} while (0) +static inline void copy_to_user_page(struct vm_area_struct *vma, + struct page *page, unsigned long vaddr, + void *dst, void *src, int len) +{ + u32 addr = virt_to_phys(dst); + memcpy(dst, src, len); + if (vma->vm_flags & VM_EXEC) { + invalidate_icache_range(addr, addr + PAGE_SIZE); + flush_dcache_range(addr, addr + PAGE_SIZE); + } +} + +static inline void copy_from_user_page(struct vm_area_struct *vma, + struct page *page, unsigned long vaddr, + void *dst, void *src, int len) +{ + memcpy(dst, src, len); +} #endif /* _ASM_MICROBLAZE_CACHEFLUSH_H */ -- cgit v0.10.2 From 963afde9509c4bef1b06be7117d018a8da26480a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 31 May 2013 15:20:31 +0200 Subject: ALSA: hda/via - Clean up duplicated codes The previous commit was written in the way to make the backport to 3.9.y easier, and left the duplicated open codes intentionally. Now let's clean up the duplicated codes. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index cfdb917..4b1524a 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -1940,17 +1940,7 @@ static int create_speaker_out_ctls(struct hda_codec *codec) * independent HP controls */ -/* update HP auto-mute state too */ -static void update_hp_automute_hook(struct hda_codec *codec) -{ - struct hda_gen_spec *spec = codec->spec; - - if (spec->hp_automute_hook) - spec->hp_automute_hook(codec, NULL); - else - snd_hda_gen_hp_automute(codec, NULL); -} - +static void call_hp_automute(struct hda_codec *codec, struct hda_jack_tbl *jack); static int indep_hp_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { @@ -2011,7 +2001,7 @@ static int indep_hp_put(struct snd_kcontrol *kcontrol, else *dacp = spec->alt_dac_nid; - update_hp_automute_hook(codec); + call_hp_automute(codec, NULL); ret = 1; } unlock: @@ -2307,7 +2297,7 @@ static void update_hp_mic(struct hda_codec *codec, int adc_mux, bool force) else val = PIN_HP; set_pin_target(codec, pin, val, true); - update_hp_automute_hook(codec); + call_hp_automute(codec, NULL); } } @@ -2716,7 +2706,7 @@ static int hp_mic_jack_mode_put(struct snd_kcontrol *kcontrol, val = snd_hda_get_default_vref(codec, nid); } snd_hda_set_pin_ctl_cache(codec, nid, val); - update_hp_automute_hook(codec); + call_hp_automute(codec, NULL); return 1; } @@ -3861,22 +3851,6 @@ void snd_hda_gen_mic_autoswitch(struct hda_codec *codec, struct hda_jack_tbl *ja } EXPORT_SYMBOL_HDA(snd_hda_gen_mic_autoswitch); -/* update jack retasking */ -static void update_automute_all(struct hda_codec *codec) -{ - struct hda_gen_spec *spec = codec->spec; - - update_hp_automute_hook(codec); - if (spec->line_automute_hook) - spec->line_automute_hook(codec, NULL); - else - snd_hda_gen_line_automute(codec, NULL); - if (spec->mic_autoswitch_hook) - spec->mic_autoswitch_hook(codec, NULL); - else - snd_hda_gen_mic_autoswitch(codec, NULL); -} - /* call appropriate hooks */ static void call_hp_automute(struct hda_codec *codec, struct hda_jack_tbl *jack) { @@ -3907,6 +3881,14 @@ static void call_mic_autoswitch(struct hda_codec *codec, snd_hda_gen_mic_autoswitch(codec, jack); } +/* update jack retasking */ +static void update_automute_all(struct hda_codec *codec) +{ + call_hp_automute(codec, NULL); + call_line_automute(codec, NULL); + call_mic_autoswitch(codec, NULL); +} + /* * Auto-Mute mode mixer enum support */ -- cgit v0.10.2 From a90f13b24fb40d02d11496cce6a10ae8d4b319b2 Mon Sep 17 00:00:00 2001 From: Jonas Peterson Date: Tue, 7 May 2013 22:05:23 +0200 Subject: net: can: kvaser_usb: fix reception on "USBcan Pro" and "USBcan R" type hardware. Unlike Kvaser Leaf light devices, some other Kvaser devices (like USBcan Pro, USBcan R) receive CAN messages in CMD_LOG_MESSAGE frames. This patch adds support for it. Cc: linux-stable # >= v3.8 Signed-off-by: Jonas Peterson Signed-off-by: Olivier Sobrie Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c index 45cb9f3..3b95465 100644 --- a/drivers/net/can/usb/kvaser_usb.c +++ b/drivers/net/can/usb/kvaser_usb.c @@ -136,6 +136,9 @@ #define KVASER_CTRL_MODE_SELFRECEPTION 3 #define KVASER_CTRL_MODE_OFF 4 +/* log message */ +#define KVASER_EXTENDED_FRAME BIT(31) + struct kvaser_msg_simple { u8 tid; u8 channel; @@ -817,8 +820,13 @@ static void kvaser_usb_rx_can_msg(const struct kvaser_usb *dev, priv = dev->nets[channel]; stats = &priv->netdev->stats; - if (msg->u.rx_can.flag & (MSG_FLAG_ERROR_FRAME | MSG_FLAG_NERR | - MSG_FLAG_OVERRUN)) { + if ((msg->u.rx_can.flag & MSG_FLAG_ERROR_FRAME) && + (msg->id == CMD_LOG_MESSAGE)) { + kvaser_usb_rx_error(dev, msg); + return; + } else if (msg->u.rx_can.flag & (MSG_FLAG_ERROR_FRAME | + MSG_FLAG_NERR | + MSG_FLAG_OVERRUN)) { kvaser_usb_rx_can_err(priv, msg); return; } else if (msg->u.rx_can.flag & ~MSG_FLAG_REMOTE_FRAME) { @@ -834,22 +842,40 @@ static void kvaser_usb_rx_can_msg(const struct kvaser_usb *dev, return; } - cf->can_id = ((msg->u.rx_can.msg[0] & 0x1f) << 6) | - (msg->u.rx_can.msg[1] & 0x3f); - cf->can_dlc = get_can_dlc(msg->u.rx_can.msg[5]); + if (msg->id == CMD_LOG_MESSAGE) { + cf->can_id = le32_to_cpu(msg->u.log_message.id); + if (cf->can_id & KVASER_EXTENDED_FRAME) + cf->can_id &= CAN_EFF_MASK | CAN_EFF_FLAG; + else + cf->can_id &= CAN_SFF_MASK; - if (msg->id == CMD_RX_EXT_MESSAGE) { - cf->can_id <<= 18; - cf->can_id |= ((msg->u.rx_can.msg[2] & 0x0f) << 14) | - ((msg->u.rx_can.msg[3] & 0xff) << 6) | - (msg->u.rx_can.msg[4] & 0x3f); - cf->can_id |= CAN_EFF_FLAG; - } + cf->can_dlc = get_can_dlc(msg->u.log_message.dlc); - if (msg->u.rx_can.flag & MSG_FLAG_REMOTE_FRAME) - cf->can_id |= CAN_RTR_FLAG; - else - memcpy(cf->data, &msg->u.rx_can.msg[6], cf->can_dlc); + if (msg->u.log_message.flags & MSG_FLAG_REMOTE_FRAME) + cf->can_id |= CAN_RTR_FLAG; + else + memcpy(cf->data, &msg->u.log_message.data, + cf->can_dlc); + } else { + cf->can_id = ((msg->u.rx_can.msg[0] & 0x1f) << 6) | + (msg->u.rx_can.msg[1] & 0x3f); + + if (msg->id == CMD_RX_EXT_MESSAGE) { + cf->can_id <<= 18; + cf->can_id |= ((msg->u.rx_can.msg[2] & 0x0f) << 14) | + ((msg->u.rx_can.msg[3] & 0xff) << 6) | + (msg->u.rx_can.msg[4] & 0x3f); + cf->can_id |= CAN_EFF_FLAG; + } + + cf->can_dlc = get_can_dlc(msg->u.rx_can.msg[5]); + + if (msg->u.rx_can.flag & MSG_FLAG_REMOTE_FRAME) + cf->can_id |= CAN_RTR_FLAG; + else + memcpy(cf->data, &msg->u.rx_can.msg[6], + cf->can_dlc); + } netif_rx(skb); @@ -911,6 +937,7 @@ static void kvaser_usb_handle_message(const struct kvaser_usb *dev, case CMD_RX_STD_MESSAGE: case CMD_RX_EXT_MESSAGE: + case CMD_LOG_MESSAGE: kvaser_usb_rx_can_msg(dev, msg); break; @@ -919,11 +946,6 @@ static void kvaser_usb_handle_message(const struct kvaser_usb *dev, kvaser_usb_rx_error(dev, msg); break; - case CMD_LOG_MESSAGE: - if (msg->u.log_message.flags & MSG_FLAG_ERROR_FRAME) - kvaser_usb_rx_error(dev, msg); - break; - case CMD_TX_ACKNOWLEDGE: kvaser_usb_tx_acknowledge(dev, msg); break; -- cgit v0.10.2 From fae37f81fdf3680c5d70abdc57e7b83f4b6c266a Mon Sep 17 00:00:00 2001 From: Olivier Sobrie Date: Fri, 18 Jan 2013 09:14:04 +0100 Subject: net: can: esd_usb2: Do not do dma on the stack smatch reports the following warnings: drivers/net/can/usb/esd_usb2.c:640 esd_usb2_start() error: doing dma on the stack (&msg) drivers/net/can/usb/esd_usb2.c:846 esd_usb2_close() error: doing dma on the stack (&msg) drivers/net/can/usb/esd_usb2.c:855 esd_usb2_close() error: doing dma on the stack (&msg) drivers/net/can/usb/esd_usb2.c:923 esd_usb2_set_bittiming() error: doing dma on the stack (&msg) drivers/net/can/usb/esd_usb2.c:1047 esd_usb2_probe() error: doing dma on the stack (&msg) drivers/net/can/usb/esd_usb2.c:1053 esd_usb2_probe() error: doing dma on the stack (&msg) See "Documentation/DMA-API-HOWTO.txt" section "What memory is DMA'able?" Signed-off-by: Olivier Sobrie Cc: Matthias Fuchs Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/usb/esd_usb2.c b/drivers/net/can/usb/esd_usb2.c index 9b74d1e..6aa7b32 100644 --- a/drivers/net/can/usb/esd_usb2.c +++ b/drivers/net/can/usb/esd_usb2.c @@ -612,9 +612,15 @@ static int esd_usb2_start(struct esd_usb2_net_priv *priv) { struct esd_usb2 *dev = priv->usb2; struct net_device *netdev = priv->netdev; - struct esd_usb2_msg msg; + struct esd_usb2_msg *msg; int err, i; + msg = kmalloc(sizeof(*msg), GFP_KERNEL); + if (!msg) { + err = -ENOMEM; + goto out; + } + /* * Enable all IDs * The IDADD message takes up to 64 32 bit bitmasks (2048 bits). @@ -628,33 +634,32 @@ static int esd_usb2_start(struct esd_usb2_net_priv *priv) * the number of the starting bitmask (0..64) to the filter.option * field followed by only some bitmasks. */ - msg.msg.hdr.cmd = CMD_IDADD; - msg.msg.hdr.len = 2 + ESD_MAX_ID_SEGMENT; - msg.msg.filter.net = priv->index; - msg.msg.filter.option = ESD_ID_ENABLE; /* start with segment 0 */ + msg->msg.hdr.cmd = CMD_IDADD; + msg->msg.hdr.len = 2 + ESD_MAX_ID_SEGMENT; + msg->msg.filter.net = priv->index; + msg->msg.filter.option = ESD_ID_ENABLE; /* start with segment 0 */ for (i = 0; i < ESD_MAX_ID_SEGMENT; i++) - msg.msg.filter.mask[i] = cpu_to_le32(0xffffffff); + msg->msg.filter.mask[i] = cpu_to_le32(0xffffffff); /* enable 29bit extended IDs */ - msg.msg.filter.mask[ESD_MAX_ID_SEGMENT] = cpu_to_le32(0x00000001); + msg->msg.filter.mask[ESD_MAX_ID_SEGMENT] = cpu_to_le32(0x00000001); - err = esd_usb2_send_msg(dev, &msg); + err = esd_usb2_send_msg(dev, msg); if (err) - goto failed; + goto out; err = esd_usb2_setup_rx_urbs(dev); if (err) - goto failed; + goto out; priv->can.state = CAN_STATE_ERROR_ACTIVE; - return 0; - -failed: +out: if (err == -ENODEV) netif_device_detach(netdev); + if (err) + netdev_err(netdev, "couldn't start device: %d\n", err); - netdev_err(netdev, "couldn't start device: %d\n", err); - + kfree(msg); return err; } @@ -833,26 +838,30 @@ nourbmem: static int esd_usb2_close(struct net_device *netdev) { struct esd_usb2_net_priv *priv = netdev_priv(netdev); - struct esd_usb2_msg msg; + struct esd_usb2_msg *msg; int i; + msg = kmalloc(sizeof(*msg), GFP_KERNEL); + if (!msg) + return -ENOMEM; + /* Disable all IDs (see esd_usb2_start()) */ - msg.msg.hdr.cmd = CMD_IDADD; - msg.msg.hdr.len = 2 + ESD_MAX_ID_SEGMENT; - msg.msg.filter.net = priv->index; - msg.msg.filter.option = ESD_ID_ENABLE; /* start with segment 0 */ + msg->msg.hdr.cmd = CMD_IDADD; + msg->msg.hdr.len = 2 + ESD_MAX_ID_SEGMENT; + msg->msg.filter.net = priv->index; + msg->msg.filter.option = ESD_ID_ENABLE; /* start with segment 0 */ for (i = 0; i <= ESD_MAX_ID_SEGMENT; i++) - msg.msg.filter.mask[i] = 0; - if (esd_usb2_send_msg(priv->usb2, &msg) < 0) + msg->msg.filter.mask[i] = 0; + if (esd_usb2_send_msg(priv->usb2, msg) < 0) netdev_err(netdev, "sending idadd message failed\n"); /* set CAN controller to reset mode */ - msg.msg.hdr.len = 2; - msg.msg.hdr.cmd = CMD_SETBAUD; - msg.msg.setbaud.net = priv->index; - msg.msg.setbaud.rsvd = 0; - msg.msg.setbaud.baud = cpu_to_le32(ESD_USB2_NO_BAUDRATE); - if (esd_usb2_send_msg(priv->usb2, &msg) < 0) + msg->msg.hdr.len = 2; + msg->msg.hdr.cmd = CMD_SETBAUD; + msg->msg.setbaud.net = priv->index; + msg->msg.setbaud.rsvd = 0; + msg->msg.setbaud.baud = cpu_to_le32(ESD_USB2_NO_BAUDRATE); + if (esd_usb2_send_msg(priv->usb2, msg) < 0) netdev_err(netdev, "sending setbaud message failed\n"); priv->can.state = CAN_STATE_STOPPED; @@ -861,6 +870,8 @@ static int esd_usb2_close(struct net_device *netdev) close_candev(netdev); + kfree(msg); + return 0; } @@ -886,7 +897,8 @@ static int esd_usb2_set_bittiming(struct net_device *netdev) { struct esd_usb2_net_priv *priv = netdev_priv(netdev); struct can_bittiming *bt = &priv->can.bittiming; - struct esd_usb2_msg msg; + struct esd_usb2_msg *msg; + int err; u32 canbtr; int sjw_shift; @@ -912,15 +924,22 @@ static int esd_usb2_set_bittiming(struct net_device *netdev) if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) canbtr |= ESD_USB2_3_SAMPLES; - msg.msg.hdr.len = 2; - msg.msg.hdr.cmd = CMD_SETBAUD; - msg.msg.setbaud.net = priv->index; - msg.msg.setbaud.rsvd = 0; - msg.msg.setbaud.baud = cpu_to_le32(canbtr); + msg = kmalloc(sizeof(*msg), GFP_KERNEL); + if (!msg) + return -ENOMEM; + + msg->msg.hdr.len = 2; + msg->msg.hdr.cmd = CMD_SETBAUD; + msg->msg.setbaud.net = priv->index; + msg->msg.setbaud.rsvd = 0; + msg->msg.setbaud.baud = cpu_to_le32(canbtr); netdev_info(netdev, "setting BTR=%#x\n", canbtr); - return esd_usb2_send_msg(priv->usb2, &msg); + err = esd_usb2_send_msg(priv->usb2, msg); + + kfree(msg); + return err; } static int esd_usb2_get_berr_counter(const struct net_device *netdev, @@ -1022,7 +1041,7 @@ static int esd_usb2_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct esd_usb2 *dev; - struct esd_usb2_msg msg; + struct esd_usb2_msg *msg; int i, err; dev = kzalloc(sizeof(*dev), GFP_KERNEL); @@ -1037,27 +1056,33 @@ static int esd_usb2_probe(struct usb_interface *intf, usb_set_intfdata(intf, dev); + msg = kmalloc(sizeof(*msg), GFP_KERNEL); + if (!msg) { + err = -ENOMEM; + goto free_msg; + } + /* query number of CAN interfaces (nets) */ - msg.msg.hdr.cmd = CMD_VERSION; - msg.msg.hdr.len = 2; - msg.msg.version.rsvd = 0; - msg.msg.version.flags = 0; - msg.msg.version.drv_version = 0; + msg->msg.hdr.cmd = CMD_VERSION; + msg->msg.hdr.len = 2; + msg->msg.version.rsvd = 0; + msg->msg.version.flags = 0; + msg->msg.version.drv_version = 0; - err = esd_usb2_send_msg(dev, &msg); + err = esd_usb2_send_msg(dev, msg); if (err < 0) { dev_err(&intf->dev, "sending version message failed\n"); - goto free_dev; + goto free_msg; } - err = esd_usb2_wait_msg(dev, &msg); + err = esd_usb2_wait_msg(dev, msg); if (err < 0) { dev_err(&intf->dev, "no version message answer\n"); - goto free_dev; + goto free_msg; } - dev->net_count = (int)msg.msg.version_reply.nets; - dev->version = le32_to_cpu(msg.msg.version_reply.version); + dev->net_count = (int)msg->msg.version_reply.nets; + dev->version = le32_to_cpu(msg->msg.version_reply.version); if (device_create_file(&intf->dev, &dev_attr_firmware)) dev_err(&intf->dev, @@ -1075,10 +1100,10 @@ static int esd_usb2_probe(struct usb_interface *intf, for (i = 0; i < dev->net_count; i++) esd_usb2_probe_one_net(intf, i); - return 0; - -free_dev: - kfree(dev); +free_msg: + kfree(msg); + if (err) + kfree(dev); done: return err; } -- cgit v0.10.2 From f14e22435a27ef183bbfa78f77ad86644c0b354c Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Thu, 16 May 2013 11:36:40 +0200 Subject: net: can: peak_usb: Do not do dma on the stack smatch reports the following warnings: drivers/net/can/usb/peak_usb/pcan_usb_pro.c:514 pcan_usb_pro_drv_loaded() error: doing dma on the stack (buffer) drivers/net/can/usb/peak_usb/pcan_usb_pro.c:878 pcan_usb_pro_init() error: doing dma on the stack (&fi) drivers/net/can/usb/peak_usb/pcan_usb_pro.c:889 pcan_usb_pro_init() error: doing dma on the stack (&bi) See "Documentation/DMA-API-HOWTO.txt" section "What memory is DMA'able?" Cc: Stephane Grosjean Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c index 30d79bf..8ee9d15 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c @@ -504,15 +504,24 @@ static int pcan_usb_pro_restart_async(struct peak_usb_device *dev, return usb_submit_urb(urb, GFP_ATOMIC); } -static void pcan_usb_pro_drv_loaded(struct peak_usb_device *dev, int loaded) +static int pcan_usb_pro_drv_loaded(struct peak_usb_device *dev, int loaded) { - u8 buffer[16]; + u8 *buffer; + int err; + + buffer = kmalloc(PCAN_USBPRO_FCT_DRVLD_REQ_LEN, GFP_KERNEL); + if (!buffer) + return -ENOMEM; buffer[0] = 0; buffer[1] = !!loaded; - pcan_usb_pro_send_req(dev, PCAN_USBPRO_REQ_FCT, - PCAN_USBPRO_FCT_DRVLD, buffer, sizeof(buffer)); + err = pcan_usb_pro_send_req(dev, PCAN_USBPRO_REQ_FCT, + PCAN_USBPRO_FCT_DRVLD, buffer, + PCAN_USBPRO_FCT_DRVLD_REQ_LEN); + kfree(buffer); + + return err; } static inline @@ -851,21 +860,24 @@ static int pcan_usb_pro_stop(struct peak_usb_device *dev) */ static int pcan_usb_pro_init(struct peak_usb_device *dev) { - struct pcan_usb_pro_interface *usb_if; struct pcan_usb_pro_device *pdev = container_of(dev, struct pcan_usb_pro_device, dev); + struct pcan_usb_pro_interface *usb_if = NULL; + struct pcan_usb_pro_fwinfo *fi = NULL; + struct pcan_usb_pro_blinfo *bi = NULL; + int err; /* do this for 1st channel only */ if (!dev->prev_siblings) { - struct pcan_usb_pro_fwinfo fi; - struct pcan_usb_pro_blinfo bi; - int err; - /* allocate netdevices common structure attached to first one */ usb_if = kzalloc(sizeof(struct pcan_usb_pro_interface), GFP_KERNEL); - if (!usb_if) - return -ENOMEM; + fi = kmalloc(sizeof(struct pcan_usb_pro_fwinfo), GFP_KERNEL); + bi = kmalloc(sizeof(struct pcan_usb_pro_blinfo), GFP_KERNEL); + if (!usb_if || !fi || !bi) { + err = -ENOMEM; + goto err_out; + } /* number of ts msgs to ignore before taking one into account */ usb_if->cm_ignore_count = 5; @@ -877,34 +889,34 @@ static int pcan_usb_pro_init(struct peak_usb_device *dev) */ err = pcan_usb_pro_send_req(dev, PCAN_USBPRO_REQ_INFO, PCAN_USBPRO_INFO_FW, - &fi, sizeof(fi)); + fi, sizeof(*fi)); if (err) { - kfree(usb_if); dev_err(dev->netdev->dev.parent, "unable to read %s firmware info (err %d)\n", pcan_usb_pro.name, err); - return err; + goto err_out; } err = pcan_usb_pro_send_req(dev, PCAN_USBPRO_REQ_INFO, PCAN_USBPRO_INFO_BL, - &bi, sizeof(bi)); + bi, sizeof(*bi)); if (err) { - kfree(usb_if); dev_err(dev->netdev->dev.parent, "unable to read %s bootloader info (err %d)\n", pcan_usb_pro.name, err); - return err; + goto err_out; } + /* tell the device the can driver is running */ + err = pcan_usb_pro_drv_loaded(dev, 1); + if (err) + goto err_out; + dev_info(dev->netdev->dev.parent, "PEAK-System %s hwrev %u serial %08X.%08X (%u channels)\n", pcan_usb_pro.name, - bi.hw_rev, bi.serial_num_hi, bi.serial_num_lo, + bi->hw_rev, bi->serial_num_hi, bi->serial_num_lo, pcan_usb_pro.ctrl_count); - - /* tell the device the can driver is running */ - pcan_usb_pro_drv_loaded(dev, 1); } else { usb_if = pcan_usb_pro_dev_if(dev->prev_siblings); } @@ -916,6 +928,13 @@ static int pcan_usb_pro_init(struct peak_usb_device *dev) pcan_usb_pro_set_led(dev, 0, 1); return 0; + + err_out: + kfree(bi); + kfree(fi); + kfree(usb_if); + + return err; } static void pcan_usb_pro_exit(struct peak_usb_device *dev) diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.h b/drivers/net/can/usb/peak_usb/pcan_usb_pro.h index a869918..32275af 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.h +++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.h @@ -29,6 +29,7 @@ /* Vendor Request value for XXX_FCT */ #define PCAN_USBPRO_FCT_DRVLD 5 /* tell device driver is loaded */ +#define PCAN_USBPRO_FCT_DRVLD_REQ_LEN 16 /* PCAN_USBPRO_INFO_BL vendor request record type */ struct __packed pcan_usb_pro_blinfo { -- cgit v0.10.2 From 7abb690a0e095717420ba78dcab4309abbbec78a Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Fri, 24 May 2013 21:29:32 +0200 Subject: drm/i915: Fix spurious -EIO/SIGBUS on wedged gpus Chris Wilson noticed that since commit 1f83fee08d625f8d0130f9fe5ef7b17c2e022f3c [v3.9] Author: Daniel Vetter Date: Thu Nov 15 17:17:22 2012 +0100 drm/i915: clear up wedged transitions X can again get -EIO when it does not expect it. And even worse score a SIGBUS when accessing gtt mmaps. The established ABI is that we _only_ return an -EIO from execbuf - all other ioctls should just work. And since the reset code moves all bos out of gpu domains and clears out all the last_seqno/ring tracking there really shouldn't be any reason for non-execbuf code to ever touch the hw and see an -EIO. After some extensive discussions we've noticed that these spurios -EIO are caused by i915_gem_wait_for_error: http://www.mail-archive.com/intel-gfx@lists.freedesktop.org/msg20540.html That is easy to fix by returning 0 instead of -EIO, since grabbing the dev->struct_mutex does not yet mean that we actually want to touch the hw. And so there is no reason at all to fail with -EIO. But that's not the entire since, since often (at least it's easily googleable) dmesg indicates that the reset fails and we declare the gpu wedged. Then, quite a bit later X wakes up with the "Timed out waiting for the gpu reset to complete" DRM_ERROR message in wait_for_errror and brings down the desktop with an -EIO/SIGBUS. So clearly we're missing a wakeup somewhere, since the gpu reset just doesn't take 10 seconds to complete. And indeed we're do handle the terminally wedged state wrong. Fix this all up. References: https://bugs.freedesktop.org/show_bug.cgi?id=63921 References: https://bugs.freedesktop.org/show_bug.cgi?id=64073 Cc: Chris Wilson Cc: Daniel Vetter Cc: Damien Lespiau Cc: stable@vger.kernel.org Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index a6cf8e8..970ad17 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -91,14 +91,11 @@ i915_gem_wait_for_error(struct i915_gpu_error *error) { int ret; -#define EXIT_COND (!i915_reset_in_progress(error)) +#define EXIT_COND (!i915_reset_in_progress(error) || \ + i915_terminally_wedged(error)) if (EXIT_COND) return 0; - /* GPU is already declared terminally dead, give up. */ - if (i915_terminally_wedged(error)) - return -EIO; - /* * Only wait 10 seconds for the gpu reset to complete to avoid hanging * userspace. If it takes that long something really bad is going on and -- cgit v0.10.2 From d62cf62ad07d5584da1f2132641928ded8216327 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 29 May 2013 10:41:29 +0200 Subject: drm/i915: Quirk the pipe A quirk in the modeset state checker If we always force the pipe A to on we can't use the hw state to decide whether it should be on. Hence quirk the quirk. The problem is that crtc->active tracks the state of the entire display pipe, i.e. including planes, encoders and all. But our hw state readout simply looks at the pipe. But with the pipe A quirk we force-enable that (together with it's pll). To fix that mismatch we have two options: - Quirk the checked state to match what our sw tracking states if the pipe A quirk is in effect. - Improve the hw state readout to not get fooled by the pipe A quirk. Since we already have similar state clamping in e.g. assert_pipe I've opted for the first variant. Also note that we don't really loose any state checking: Individual pieces of the abstract crtc pipe are checked in the enable/disable functions with the various asssert_* checks we have, and the hw state check code doesn't check anything if the pipe is off anyway. v2: Pimp commit message after discussion with Chris and only apply the quirk for the quirk if we're checking pipe A. Otherwise we'll miss state checking for pipe B on i830M ... v3: Make the code comment consistent with the improved commit message, too (Chris). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64764 Cc: stable@vger.kernel.org Cc: Chris Wilson Reported-and-Tested-by: mlsemon35@gmail.com (v1) Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index ad1117b..56746dc 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -7937,6 +7937,11 @@ intel_modeset_check_state(struct drm_device *dev) memset(&pipe_config, 0, sizeof(pipe_config)); active = dev_priv->display.get_pipe_config(crtc, &pipe_config); + + /* hw state is inconsistent with the pipe A quirk */ + if (crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) + active = crtc->active; + WARN(crtc->active != active, "crtc active state doesn't match with hw state " "(expected %i, found %i)\n", crtc->active, active); -- cgit v0.10.2 From 45a211d75137b1ac869a8a758a6667f15827a115 Mon Sep 17 00:00:00 2001 From: Ben Mesman Date: Tue, 16 Apr 2013 20:00:28 +0200 Subject: drm/i915: no lvds quirk for hp t5740 Last year, a patch was made for the "HP t5740e Thin Client" (see http://lists.freedesktop.org/archives/dri-devel/2012-May/023245.html). This device reports an lvds panel, but does not really have one. The predecessor of this device is the "hp t5740", which also does not have an lvds panel. This patch will add the same quirk for this device. Signed-off-by: Ben Mesman Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index f36f1ba..29412cc 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -815,10 +815,10 @@ static const struct dmi_system_id intel_no_lvds[] = { }, { .callback = intel_no_lvds_dmi_callback, - .ident = "Hewlett-Packard HP t5740e Thin Client", + .ident = "Hewlett-Packard HP t5740", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "HP t5740e Thin Client"), + DMI_MATCH(DMI_PRODUCT_NAME, " t5740"), }, }, { -- cgit v0.10.2 From 28420dad233520811c0e0860e7fb4975ed863fc4 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Mon, 3 Jun 2013 14:40:22 +0200 Subject: fuse: fix readdirplus Oops in fuse_dentry_revalidate Fix bug introduced by commit 4582a4ab2a "FUSE: Adapt readdirplus to application usage patterns". We need to check for a positive dentry; negative dentries are not added by readdirplus. Secondly we need to advise the use of readdirplus on the *parent*, otherwise the whole thing is useless. Thirdly all this is only relevant if "readdirplus_auto" mode is selected by the filesystem. We advise the use of readdirplus only if the dentry was still valid. If we had to redo the lookup then there was no use in doing the -plus version. Reported-by: Bernd Schubert Signed-off-by: Miklos Szeredi CC: Feng Shuo CC: stable@vger.kernel.org diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c index 254df56..f3f783d 100644 --- a/fs/fuse/dir.c +++ b/fs/fuse/dir.c @@ -180,6 +180,8 @@ u64 fuse_get_attr_version(struct fuse_conn *fc) static int fuse_dentry_revalidate(struct dentry *entry, unsigned int flags) { struct inode *inode; + struct dentry *parent; + struct fuse_conn *fc; inode = ACCESS_ONCE(entry->d_inode); if (inode && is_bad_inode(inode)) @@ -187,10 +189,8 @@ static int fuse_dentry_revalidate(struct dentry *entry, unsigned int flags) else if (fuse_dentry_time(entry) < get_jiffies_64()) { int err; struct fuse_entry_out outarg; - struct fuse_conn *fc; struct fuse_req *req; struct fuse_forget_link *forget; - struct dentry *parent; u64 attr_version; /* For negative dentries, always do a fresh lookup */ @@ -241,8 +241,14 @@ static int fuse_dentry_revalidate(struct dentry *entry, unsigned int flags) entry_attr_timeout(&outarg), attr_version); fuse_change_entry_timeout(entry, &outarg); + } else if (inode) { + fc = get_fuse_conn(inode); + if (fc->readdirplus_auto) { + parent = dget_parent(entry); + fuse_advise_use_readdirplus(parent->d_inode); + dput(parent); + } } - fuse_advise_use_readdirplus(inode); return 1; } diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 6201f81..9a0cdde 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -867,10 +867,11 @@ static void process_init_reply(struct fuse_conn *fc, struct fuse_req *req) fc->dont_mask = 1; if (arg->flags & FUSE_AUTO_INVAL_DATA) fc->auto_inval_data = 1; - if (arg->flags & FUSE_DO_READDIRPLUS) + if (arg->flags & FUSE_DO_READDIRPLUS) { fc->do_readdirplus = 1; - if (arg->flags & FUSE_READDIRPLUS_AUTO) - fc->readdirplus_auto = 1; + if (arg->flags & FUSE_READDIRPLUS_AUTO) + fc->readdirplus_auto = 1; + } if (arg->flags & FUSE_ASYNC_DIO) fc->async_dio = 1; } else { -- cgit v0.10.2 From 00dddcaa51f997cdc6dbae3303a31024e29a0fc0 Mon Sep 17 00:00:00 2001 From: Lars Poeschel Date: Tue, 28 May 2013 10:24:57 +0200 Subject: ARM: dts: AM33xx: Fix properties on gpmc node The gpmc driver is actually looking for "gpmc,num-cs" and "gpmc,num-waitpins" properties in DT. The binding doc also states this. Correct the properties in the dts to provide the right values for the gpmc driver. Signed-off-by: Lars Poeschel Acked-by: Peter Korsgaard Acked-by: Pekon Gupta Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 1460d9b..8e1248f 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -409,8 +409,8 @@ ti,hwmods = "gpmc"; reg = <0x50000000 0x2000>; interrupts = <100>; - num-cs = <7>; - num-waitpins = <2>; + gpmc,num-cs = <7>; + gpmc,num-waitpins = <2>; #address-cells = <2>; #size-cells = <1>; status = "disabled"; -- cgit v0.10.2 From 1e68f43b7dcf0e5eee10baeb3cbe4e1ca59db9fd Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 24 May 2013 17:24:21 -0700 Subject: ARM: dts: omap4-panda|sdp: Fix mux for twl6030 IRQ pin and msecure line Earlier commits ensured proper muxing of pins related to proper TWL6030 behavior: see commit 265a2bc8 (ARM: OMAP3: TWL4030: ensure sys_nirq1 is mux'd and wakeup enabled) and commit 1ef43369 (ARM: OMAP4: TWL: mux sys_drm_msecure as output for PMIC). However these only fixed legacy boot and not DT boot. For DT boot, the default mux values need to be set properly in DT. Special thanks to Nishanth Menon for the review and catching some major flaws in earlier versions. Tested on OMAP4430/Panda and OMAP4460/Panda-ES. Cc: Nishanth Menon Cc: Tony Lindgren Signed-off-by: Kevin Hilman Acked-by: Grygorii Strashko [benoit.cousson@linaro.org: Slightly change the subject to align board name with file name] Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 03bd60d..eeb734e 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -56,9 +56,23 @@ }; }; +&omap4_pmx_wkup { + pinctrl-names = "default"; + pinctrl-0 = < + &twl6030_wkup_pins + >; + + twl6030_wkup_pins: pinmux_twl6030_wkup_pins { + pinctrl-single,pins = < + 0x14 0x2 /* fref_clk0_out.sys_drm_msecure OUTPUT | MODE2 */ + >; + }; +}; + &omap4_pmx_core { pinctrl-names = "default"; pinctrl-0 = < + &twl6030_pins &twl6040_pins &mcpdm_pins &mcbsp1_pins @@ -66,6 +80,12 @@ &tpd12s015_pins >; + twl6030_pins: pinmux_twl6030_pins { + pinctrl-single,pins = < + 0x15e 0x4118 /* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */ + >; + }; + twl6040_pins: pinmux_twl6040_pins { pinctrl-single,pins = < 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */ diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index a35d9cd..98505a2 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -142,9 +142,23 @@ }; }; +&omap4_pmx_wkup { + pinctrl-names = "default"; + pinctrl-0 = < + &twl6030_wkup_pins + >; + + twl6030_wkup_pins: pinmux_twl6030_wkup_pins { + pinctrl-single,pins = < + 0x14 0x2 /* fref_clk0_out.sys_drm_msecure OUTPUT | MODE2 */ + >; + }; +}; + &omap4_pmx_core { pinctrl-names = "default"; pinctrl-0 = < + &twl6030_pins &twl6040_pins &mcpdm_pins &dmic_pins @@ -179,6 +193,12 @@ >; }; + twl6030_pins: pinmux_twl6030_pins { + pinctrl-single,pins = < + 0x15e 0x4118 /* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */ + >; + }; + twl6040_pins: pinmux_twl6040_pins { pinctrl-single,pins = < 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */ -- cgit v0.10.2 From 8341613afbc8d65bca8c81158edfb49f36b7ad92 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Wed, 17 Apr 2013 18:23:15 -0500 Subject: ARM: dts: OMAP5: Fix missing PWM capability to timer nodes OMAP5 has 6 timers (GPTimers 5, 6, 8 to 11) that are capable of PWM. The PWM capability property is missing from the node definitions of couple of timers. Add ti,timer-pwm attribute for timer 5, 6, 8 and 11. Signed-off-by: Suman Anna [benoit.cousson@linaro.org: Update changelog and subject to highlight the fix] Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 3dd7ff8..635cae2 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -538,6 +538,7 @@ interrupts = <0 41 0x4>; ti,hwmods = "timer5"; ti,timer-dsp; + ti,timer-pwm; }; timer6: timer@4013a000 { @@ -574,6 +575,7 @@ reg = <0x4803e000 0x80>; interrupts = <0 45 0x4>; ti,hwmods = "timer9"; + ti,timer-pwm; }; timer10: timer@48086000 { @@ -581,6 +583,7 @@ reg = <0x48086000 0x80>; interrupts = <0 46 0x4>; ti,hwmods = "timer10"; + ti,timer-pwm; }; timer11: timer@48088000 { -- cgit v0.10.2 From c9ecf989cc7626e9edf8abef79f64b909542129b Mon Sep 17 00:00:00 2001 From: Brian Foster Date: Thu, 30 May 2013 15:35:50 -0400 Subject: fuse: return -EIOCBQUEUED from fuse_direct_IO() for all async requests If request submission fails for an async request (i.e., get_user_pages() returns -ERESTARTSYS), we currently skip the -EIOCBQUEUED return and drop into wait_for_sync_kiocb() forever. Avoid this by always returning -EIOCBQUEUED for async requests. If an error occurs, the error is passed into fuse_aio_complete(), returned via aio_complete() and thus propagated to userspace via io_getevents(). Signed-off-by: Brian Foster Reviewed-by: Maxim Patlasov Signed-off-by: Miklos Szeredi diff --git a/fs/fuse/file.c b/fs/fuse/file.c index d9f4679..b3ad8d6 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -2432,7 +2432,7 @@ fuse_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, fuse_aio_complete(io, ret < 0 ? ret : 0, -1); /* we have a non-extending, async request, so return */ - if (ret > 0 && !is_sync_kiocb(iocb)) + if (!is_sync_kiocb(iocb)) return -EIOCBQUEUED; ret = wait_on_sync_kiocb(iocb); -- cgit v0.10.2 From e5c5f05dca0cf90f0f3bb1aea85dcf658baff185 Mon Sep 17 00:00:00 2001 From: Maxim Patlasov Date: Thu, 30 May 2013 16:41:34 +0400 Subject: fuse: fix alignment in short read optimization for async_dio The bug was introduced with async_dio feature: trying to optimize short reads, we cut number-of-bytes-to-read to i_size boundary. Hence the following example: truncate --size=300 /mnt/file dd if=/mnt/file of=/dev/null iflag=direct led to FUSE_READ request of 300 bytes size. This turned out to be problem for userspace fuse implementations who rely on assumption that kernel fuse does not change alignment of request from client FS. The patch turns off the optimization if async_dio is disabled. And, if it's enabled, the patch fixes adjustment of number-of-bytes-to-read to preserve alignment. Note, that we cannot throw out short read optimization entirely because otherwise a direct read of a huge size issued on a tiny file would generate a huge amount of fuse requests and most of them would be ACKed by userspace with zero bytes read. Signed-off-by: Maxim Patlasov Reviewed-by: Brian Foster Signed-off-by: Miklos Szeredi diff --git a/fs/fuse/file.c b/fs/fuse/file.c index b3ad8d6..e570081 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -2373,6 +2373,11 @@ static void fuse_do_truncate(struct file *file) fuse_do_setattr(inode, &attr, file); } +static inline loff_t fuse_round_up(loff_t off) +{ + return round_up(off, FUSE_MAX_PAGES_PER_REQ << PAGE_SHIFT); +} + static ssize_t fuse_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, loff_t offset, unsigned long nr_segs) @@ -2380,6 +2385,7 @@ fuse_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, ssize_t ret = 0; struct file *file = iocb->ki_filp; struct fuse_file *ff = file->private_data; + bool async_dio = ff->fc->async_dio; loff_t pos = 0; struct inode *inode; loff_t i_size; @@ -2391,10 +2397,10 @@ fuse_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, i_size = i_size_read(inode); /* optimization for short read */ - if (rw != WRITE && offset + count > i_size) { + if (async_dio && rw != WRITE && offset + count > i_size) { if (offset >= i_size) return 0; - count = i_size - offset; + count = min_t(loff_t, count, fuse_round_up(i_size - offset)); } io = kmalloc(sizeof(struct fuse_io_priv), GFP_KERNEL); @@ -2412,7 +2418,7 @@ fuse_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, * By default, we want to optimize all I/Os with async request * submission to the client filesystem if supported. */ - io->async = ff->fc->async_dio; + io->async = async_dio; io->iocb = iocb; /* @@ -2420,7 +2426,7 @@ fuse_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, * to wait on real async I/O requests, so we must submit this request * synchronously. */ - if (!is_sync_kiocb(iocb) && (offset + count > i_size)) + if (!is_sync_kiocb(iocb) && (offset + count > i_size) && rw == WRITE) io->async = false; if (rw == WRITE) -- cgit v0.10.2 From e49f3959a96dc279860af7e86e6dbcfda50580a5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Adis=20Hamzi=C4=87?= Date: Sun, 2 Jun 2013 16:47:54 +0200 Subject: radeon: Fix system hang issue when using KMS with older cards MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The current radeon driver initialization routines, when using KMS, are written so that the IRQ installation routine is called before initializing the WB buffer and the CP rings. With some ASICs, though, the IRQ routine tries to access the GFX_INDEX ring causing a call to RREG32 with the value of -1 in radeon_fence_read. This, in turn causes the system to completely hang with some cards, requiring a hard reset. A call stack that can cause such a hang looks like this (using rv515 ASIC for the example here): * rv515_init (rv515.c) * radeon_irq_kms_init (radeon_irq_kms.c) * drm_irq_install (drm_irq.c) * radeon_driver_irq_preinstall_kms (radeon_irq_kms.c) * rs600_irq_process (rs600.c) * radeon_fence_process - due to SW interrupt (radeon_fence.c) * radeon_fence_read (radeon_fence.c) * hang due to RREG32(-1) The patch moves the IRQ installation to the card startup routine, after the ring has been initialized, but before the IRQ has been set. This fixes the issue, but requires a check to see if the IRQ is already installed, as is the case in the system resume codepath. I have tested the patch on three machines using the rv515, the rv770 and the evergreen ASIC. They worked without issues. This seems to be a known issue and has been reported on several bug tracking sites by various distributions (see links below). Most of reports recommend booting the system with KMS disabled and then enabling KMS by reloading the radeon module. For some reason, this was indeed a usable workaround, however, UMS is now deprecated and disabled by default. Bug reports: https://bugzilla.redhat.com/show_bug.cgi?id=845745 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/561789 https://bbs.archlinux.org/viewtopic.php?id=156964 Signed-off-by: Adis Hamzić Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 8546e3b..0f89ce3 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -4754,6 +4754,12 @@ static int evergreen_startup(struct radeon_device *rdev) rdev->ring[R600_RING_TYPE_UVD_INDEX].ring_size = 0; /* Enable IRQ */ + if (!rdev->irq.installed) { + r = radeon_irq_kms_init(rdev); + if (r) + return r; + } + r = r600_irq_init(rdev); if (r) { DRM_ERROR("radeon: IH init failed (%d).\n", r); @@ -4923,10 +4929,6 @@ int evergreen_init(struct radeon_device *rdev) if (r) return r; - r = radeon_irq_kms_init(rdev); - if (r) - return r; - rdev->ring[RADEON_RING_TYPE_GFX_INDEX].ring_obj = NULL; r600_ring_init(rdev, &rdev->ring[RADEON_RING_TYPE_GFX_INDEX], 1024 * 1024); diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index 7969c0c..8458330 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -2025,6 +2025,12 @@ static int cayman_startup(struct radeon_device *rdev) } /* Enable IRQ */ + if (!rdev->irq.installed) { + r = radeon_irq_kms_init(rdev); + if (r) + return r; + } + r = r600_irq_init(rdev); if (r) { DRM_ERROR("radeon: IH init failed (%d).\n", r); @@ -2190,10 +2196,6 @@ int cayman_init(struct radeon_device *rdev) if (r) return r; - r = radeon_irq_kms_init(rdev); - if (r) - return r; - ring->ring_obj = NULL; r600_ring_init(rdev, ring, 1024 * 1024); diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 4973bff..d0314ec 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -3869,6 +3869,12 @@ static int r100_startup(struct radeon_device *rdev) } /* Enable IRQ */ + if (!rdev->irq.installed) { + r = radeon_irq_kms_init(rdev); + if (r) + return r; + } + r100_irq_set(rdev); rdev->config.r100.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL); /* 1M ring buffer */ @@ -4024,9 +4030,6 @@ int r100_init(struct radeon_device *rdev) r = radeon_fence_driver_init(rdev); if (r) return r; - r = radeon_irq_kms_init(rdev); - if (r) - return r; /* Memory manager */ r = radeon_bo_init(rdev); if (r) diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index c60350e..b9b776f 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -1382,6 +1382,12 @@ static int r300_startup(struct radeon_device *rdev) } /* Enable IRQ */ + if (!rdev->irq.installed) { + r = radeon_irq_kms_init(rdev); + if (r) + return r; + } + r100_irq_set(rdev); rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL); /* 1M ring buffer */ @@ -1516,9 +1522,6 @@ int r300_init(struct radeon_device *rdev) r = radeon_fence_driver_init(rdev); if (r) return r; - r = radeon_irq_kms_init(rdev); - if (r) - return r; /* Memory manager */ r = radeon_bo_init(rdev); if (r) diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c index 6fce2eb..4e796ec 100644 --- a/drivers/gpu/drm/radeon/r420.c +++ b/drivers/gpu/drm/radeon/r420.c @@ -265,6 +265,12 @@ static int r420_startup(struct radeon_device *rdev) } /* Enable IRQ */ + if (!rdev->irq.installed) { + r = radeon_irq_kms_init(rdev); + if (r) + return r; + } + r100_irq_set(rdev); rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL); /* 1M ring buffer */ @@ -411,10 +417,6 @@ int r420_init(struct radeon_device *rdev) if (r) { return r; } - r = radeon_irq_kms_init(rdev); - if (r) { - return r; - } /* Memory manager */ r = radeon_bo_init(rdev); if (r) { diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c index f795a4e..e1aece7 100644 --- a/drivers/gpu/drm/radeon/r520.c +++ b/drivers/gpu/drm/radeon/r520.c @@ -194,6 +194,12 @@ static int r520_startup(struct radeon_device *rdev) } /* Enable IRQ */ + if (!rdev->irq.installed) { + r = radeon_irq_kms_init(rdev); + if (r) + return r; + } + rs600_irq_set(rdev); rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL); /* 1M ring buffer */ @@ -297,9 +303,6 @@ int r520_init(struct radeon_device *rdev) r = radeon_fence_driver_init(rdev); if (r) return r; - r = radeon_irq_kms_init(rdev); - if (r) - return r; /* Memory manager */ r = radeon_bo_init(rdev); if (r) diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index b45e648..0f30d0d 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -3202,6 +3202,12 @@ static int r600_startup(struct radeon_device *rdev) } /* Enable IRQ */ + if (!rdev->irq.installed) { + r = radeon_irq_kms_init(rdev); + if (r) + return r; + } + r = r600_irq_init(rdev); if (r) { DRM_ERROR("radeon: IH init failed (%d).\n", r); @@ -3356,10 +3362,6 @@ int r600_init(struct radeon_device *rdev) if (r) return r; - r = radeon_irq_kms_init(rdev); - if (r) - return r; - rdev->ring[RADEON_RING_TYPE_GFX_INDEX].ring_obj = NULL; r600_ring_init(rdev, &rdev->ring[RADEON_RING_TYPE_GFX_INDEX], 1024 * 1024); diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c index 73051ce..233a9b9 100644 --- a/drivers/gpu/drm/radeon/rs400.c +++ b/drivers/gpu/drm/radeon/rs400.c @@ -417,6 +417,12 @@ static int rs400_startup(struct radeon_device *rdev) } /* Enable IRQ */ + if (!rdev->irq.installed) { + r = radeon_irq_kms_init(rdev); + if (r) + return r; + } + r100_irq_set(rdev); rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL); /* 1M ring buffer */ @@ -535,9 +541,6 @@ int rs400_init(struct radeon_device *rdev) r = radeon_fence_driver_init(rdev); if (r) return r; - r = radeon_irq_kms_init(rdev); - if (r) - return r; /* Memory manager */ r = radeon_bo_init(rdev); if (r) diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index 46fa1b0..670b555 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -923,6 +923,12 @@ static int rs600_startup(struct radeon_device *rdev) } /* Enable IRQ */ + if (!rdev->irq.installed) { + r = radeon_irq_kms_init(rdev); + if (r) + return r; + } + rs600_irq_set(rdev); rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL); /* 1M ring buffer */ @@ -1047,9 +1053,6 @@ int rs600_init(struct radeon_device *rdev) r = radeon_fence_driver_init(rdev); if (r) return r; - r = radeon_irq_kms_init(rdev); - if (r) - return r; /* Memory manager */ r = radeon_bo_init(rdev); if (r) diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c index ab4c86c..55880d5 100644 --- a/drivers/gpu/drm/radeon/rs690.c +++ b/drivers/gpu/drm/radeon/rs690.c @@ -651,6 +651,12 @@ static int rs690_startup(struct radeon_device *rdev) } /* Enable IRQ */ + if (!rdev->irq.installed) { + r = radeon_irq_kms_init(rdev); + if (r) + return r; + } + rs600_irq_set(rdev); rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL); /* 1M ring buffer */ @@ -776,9 +782,6 @@ int rs690_init(struct radeon_device *rdev) r = radeon_fence_driver_init(rdev); if (r) return r; - r = radeon_irq_kms_init(rdev); - if (r) - return r; /* Memory manager */ r = radeon_bo_init(rdev); if (r) diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c index ffcba73..21c7d7b 100644 --- a/drivers/gpu/drm/radeon/rv515.c +++ b/drivers/gpu/drm/radeon/rv515.c @@ -532,6 +532,12 @@ static int rv515_startup(struct radeon_device *rdev) } /* Enable IRQ */ + if (!rdev->irq.installed) { + r = radeon_irq_kms_init(rdev); + if (r) + return r; + } + rs600_irq_set(rdev); rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL); /* 1M ring buffer */ @@ -662,9 +668,6 @@ int rv515_init(struct radeon_device *rdev) r = radeon_fence_driver_init(rdev); if (r) return r; - r = radeon_irq_kms_init(rdev); - if (r) - return r; /* Memory manager */ r = radeon_bo_init(rdev); if (r) diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 08aef24..4a62ad2 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -1887,6 +1887,12 @@ static int rv770_startup(struct radeon_device *rdev) rdev->ring[R600_RING_TYPE_UVD_INDEX].ring_size = 0; /* Enable IRQ */ + if (!rdev->irq.installed) { + r = radeon_irq_kms_init(rdev); + if (r) + return r; + } + r = r600_irq_init(rdev); if (r) { DRM_ERROR("radeon: IH init failed (%d).\n", r); @@ -2045,10 +2051,6 @@ int rv770_init(struct radeon_device *rdev) if (r) return r; - r = radeon_irq_kms_init(rdev); - if (r) - return r; - rdev->ring[RADEON_RING_TYPE_GFX_INDEX].ring_obj = NULL; r600_ring_init(rdev, &rdev->ring[RADEON_RING_TYPE_GFX_INDEX], 1024 * 1024); diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index d1ba9d8..a1b0da6 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -5350,6 +5350,12 @@ static int si_startup(struct radeon_device *rdev) } /* Enable IRQ */ + if (!rdev->irq.installed) { + r = radeon_irq_kms_init(rdev); + if (r) + return r; + } + r = si_irq_init(rdev); if (r) { DRM_ERROR("radeon: IH init failed (%d).\n", r); @@ -5533,10 +5539,6 @@ int si_init(struct radeon_device *rdev) if (r) return r; - r = radeon_irq_kms_init(rdev); - if (r) - return r; - ring = &rdev->ring[RADEON_RING_TYPE_GFX_INDEX]; ring->ring_obj = NULL; r600_ring_init(rdev, ring, 1024 * 1024); -- cgit v0.10.2 From 65337e60a7616a610ef53b7a9f807eb80a827070 Mon Sep 17 00:00:00 2001 From: Samuel Li Date: Fri, 5 Apr 2013 17:50:53 -0400 Subject: drm/radeon: Use direct mapping for fast fb access on RS780/RS880 (v2) v2: fix trailing whitespace Signed-off-by: Samuel Li Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 0f30d0d..0e53416 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1046,6 +1046,24 @@ int r600_mc_wait_for_idle(struct radeon_device *rdev) return -1; } +uint32_t rs780_mc_rreg(struct radeon_device *rdev, uint32_t reg) +{ + uint32_t r; + + WREG32(R_0028F8_MC_INDEX, S_0028F8_MC_IND_ADDR(reg)); + r = RREG32(R_0028FC_MC_DATA); + WREG32(R_0028F8_MC_INDEX, ~C_0028F8_MC_IND_ADDR); + return r; +} + +void rs780_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v) +{ + WREG32(R_0028F8_MC_INDEX, S_0028F8_MC_IND_ADDR(reg) | + S_0028F8_MC_IND_WR_EN(1)); + WREG32(R_0028FC_MC_DATA, v); + WREG32(R_0028F8_MC_INDEX, 0x7F); +} + static void r600_mc_program(struct radeon_device *rdev) { struct rv515_mc_save save; @@ -1181,6 +1199,8 @@ static int r600_mc_init(struct radeon_device *rdev) { u32 tmp; int chansize, numchan; + uint32_t h_addr, l_addr; + unsigned long long k8_addr; /* Get VRAM informations */ rdev->mc.vram_is_ddr = true; @@ -1221,7 +1241,30 @@ static int r600_mc_init(struct radeon_device *rdev) if (rdev->flags & RADEON_IS_IGP) { rs690_pm_info(rdev); rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev); + + if (rdev->family == CHIP_RS780 || rdev->family == CHIP_RS880) { + /* Use K8 direct mapping for fast fb access. */ + rdev->fastfb_working = false; + h_addr = G_000012_K8_ADDR_EXT(RREG32_MC(R_000012_MC_MISC_UMA_CNTL)); + l_addr = RREG32_MC(R_000011_K8_FB_LOCATION); + k8_addr = ((unsigned long long)h_addr) << 32 | l_addr; +#if defined(CONFIG_X86_32) && !defined(CONFIG_X86_PAE) + if (k8_addr + rdev->mc.visible_vram_size < 0x100000000ULL) +#endif + { + /* FastFB shall be used with UMA memory. Here it is simply disabled when sideport + * memory is present. + */ + if (rdev->mc.igp_sideport_enabled == false && radeon_fastfb == 1) { + DRM_INFO("Direct mapping: aper base at 0x%llx, replaced by direct mapping base 0x%llx.\n", + (unsigned long long)rdev->mc.aper_base, k8_addr); + rdev->mc.aper_base = (resource_size_t)k8_addr; + rdev->fastfb_working = true; + } + } + } } + radeon_update_bandwidth_info(rdev); return 0; } diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h index acb146c..79df558 100644 --- a/drivers/gpu/drm/radeon/r600d.h +++ b/drivers/gpu/drm/radeon/r600d.h @@ -1342,6 +1342,14 @@ #define PACKET3_STRMOUT_BASE_UPDATE 0x72 /* r7xx */ #define PACKET3_SURFACE_BASE_UPDATE 0x73 +#define R_000011_K8_FB_LOCATION 0x11 +#define R_000012_MC_MISC_UMA_CNTL 0x12 +#define G_000012_K8_ADDR_EXT(x) (((x) >> 0) & 0xFF) +#define R_0028F8_MC_INDEX 0x28F8 +#define S_0028F8_MC_IND_ADDR(x) (((x) & 0x1FF) << 0) +#define C_0028F8_MC_IND_ADDR 0xFFFFFE00 +#define S_0028F8_MC_IND_WR_EN(x) (((x) & 0x1) << 9) +#define R_0028FC_MC_DATA 0x28FC #define R_008020_GRBM_SOFT_RESET 0x8020 #define S_008020_SOFT_RESET_CP(x) (((x) & 1) << 0) diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c index 06b8c19..a2802b47 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.c +++ b/drivers/gpu/drm/radeon/radeon_asic.c @@ -122,6 +122,10 @@ static void radeon_register_accessor_init(struct radeon_device *rdev) rdev->mc_rreg = &rs600_mc_rreg; rdev->mc_wreg = &rs600_mc_wreg; } + if (rdev->family == CHIP_RS780 || rdev->family == CHIP_RS880) { + rdev->mc_rreg = &rs780_mc_rreg; + rdev->mc_wreg = &rs780_mc_wreg; + } if (rdev->family >= CHIP_R600) { rdev->pciep_rreg = &r600_pciep_rreg; rdev->pciep_wreg = &r600_pciep_wreg; diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h index 2c87365..a72759e 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.h +++ b/drivers/gpu/drm/radeon/radeon_asic.h @@ -347,6 +347,8 @@ extern bool r600_gui_idle(struct radeon_device *rdev); extern void r600_pm_misc(struct radeon_device *rdev); extern void r600_pm_init_profile(struct radeon_device *rdev); extern void rs780_pm_init_profile(struct radeon_device *rdev); +extern uint32_t rs780_mc_rreg(struct radeon_device *rdev, uint32_t reg); +extern void rs780_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v); extern void r600_pm_get_dynpm_state(struct radeon_device *rdev); extern void r600_set_pcie_lanes(struct radeon_device *rdev, int lanes); extern int r600_get_pcie_lanes(struct radeon_device *rdev); -- cgit v0.10.2 From 1cbcca302a318499f20a512847c5d6a510c08c35 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 3 Jun 2013 10:32:40 -0400 Subject: drm/radeon: don't allow audio on DCE6 It's not supported yet. Fixes display issues when users force it on. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c index 44a7da6..8406c82 100644 --- a/drivers/gpu/drm/radeon/atombios_encoders.c +++ b/drivers/gpu/drm/radeon/atombios_encoders.c @@ -667,6 +667,8 @@ atombios_digital_setup(struct drm_encoder *encoder, int action) int atombios_get_encoder_mode(struct drm_encoder *encoder) { + struct drm_device *dev = encoder->dev; + struct radeon_device *rdev = dev->dev_private; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct drm_connector *connector; struct radeon_connector *radeon_connector; @@ -693,7 +695,8 @@ atombios_get_encoder_mode(struct drm_encoder *encoder) case DRM_MODE_CONNECTOR_DVII: case DRM_MODE_CONNECTOR_HDMIB: /* HDMI-B is basically DL-DVI; analog works fine */ if (drm_detect_hdmi_monitor(radeon_connector->edid) && - radeon_audio) + radeon_audio && + !ASIC_IS_DCE6(rdev)) /* remove once we support DCE6 */ return ATOM_ENCODER_MODE_HDMI; else if (radeon_connector->use_digital) return ATOM_ENCODER_MODE_DVI; @@ -704,7 +707,8 @@ atombios_get_encoder_mode(struct drm_encoder *encoder) case DRM_MODE_CONNECTOR_HDMIA: default: if (drm_detect_hdmi_monitor(radeon_connector->edid) && - radeon_audio) + radeon_audio && + !ASIC_IS_DCE6(rdev)) /* remove once we support DCE6 */ return ATOM_ENCODER_MODE_HDMI; else return ATOM_ENCODER_MODE_DVI; @@ -718,7 +722,8 @@ atombios_get_encoder_mode(struct drm_encoder *encoder) (dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_eDP)) return ATOM_ENCODER_MODE_DP; else if (drm_detect_hdmi_monitor(radeon_connector->edid) && - radeon_audio) + radeon_audio && + !ASIC_IS_DCE6(rdev)) /* remove once we support DCE6 */ return ATOM_ENCODER_MODE_HDMI; else return ATOM_ENCODER_MODE_DVI; -- cgit v0.10.2 From b5f83e9b069f4bf19214ca6130947806a2b853fa Mon Sep 17 00:00:00 2001 From: Markus Pargmann Date: Tue, 28 May 2013 17:00:57 +0200 Subject: ARM: mxs: icoll: Fix interrupts gpio bank 0 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The mxs interrupt controller does not support polling for interrupts, but the driver still does it, which is a relict from pre-MULTI_IRQ_HANDLER times. The existing code assumes that 0x7f means no interrupt, but this value is an actually valid irq number, namely gpio bank 0's irq. This results in the driver not detecting when irq 0x7f is active which makes the machine effectively dead lock. This patch removes the interrupt poll loop and allows usage of gpio0 interrupt without an infinite loop. Signed-off-by: Uwe Kleine-König Signed-off-by: Markus Pargmann Cc: stable@vger.kernel.org Signed-off-by: Shawn Guo diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c index 29889bb..63b3d4e 100644 --- a/drivers/irqchip/irq-mxs.c +++ b/drivers/irqchip/irq-mxs.c @@ -76,16 +76,10 @@ asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs) { u32 irqnr; - do { - irqnr = __raw_readl(icoll_base + HW_ICOLL_STAT_OFFSET); - if (irqnr != 0x7f) { - __raw_writel(irqnr, icoll_base + HW_ICOLL_VECTOR); - irqnr = irq_find_mapping(icoll_domain, irqnr); - handle_IRQ(irqnr, regs); - continue; - } - break; - } while (1); + irqnr = __raw_readl(icoll_base + HW_ICOLL_STAT_OFFSET); + __raw_writel(irqnr, icoll_base + HW_ICOLL_VECTOR); + irqnr = irq_find_mapping(icoll_domain, irqnr); + handle_IRQ(irqnr, regs); } static int icoll_irq_domain_map(struct irq_domain *d, unsigned int virq, -- cgit v0.10.2 From 4a586812055dbd2588b0836ab758f6b9670c3949 Mon Sep 17 00:00:00 2001 From: Bob Peterson Date: Fri, 24 May 2013 15:02:49 -0400 Subject: GFS2: Set log descriptor type for jdata blocks This patch sets the log descriptor type according to whether the journal commit is for (journaled) data or metadata. This was recently broken when the functions to process data and metadata log ops were combined. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/lops.c b/fs/gfs2/lops.c index 68b4c8f..6c33d7b 100644 --- a/fs/gfs2/lops.c +++ b/fs/gfs2/lops.c @@ -419,7 +419,9 @@ static void gfs2_before_commit(struct gfs2_sbd *sdp, unsigned int limit, if (total > limit) num = limit; gfs2_log_unlock(sdp); - page = gfs2_get_log_desc(sdp, GFS2_LOG_DESC_METADATA, num + 1, num); + page = gfs2_get_log_desc(sdp, + is_databuf ? GFS2_LOG_DESC_JDATA : + GFS2_LOG_DESC_METADATA, num + 1, num); ld = page_address(page); gfs2_log_lock(sdp); ptr = (__be64 *)(ld + 1); -- cgit v0.10.2 From 2b3dcf35810ff02ad0e785527a25c1b13bf82b19 Mon Sep 17 00:00:00 2001 From: Bob Peterson Date: Tue, 28 May 2013 10:04:44 -0400 Subject: GFS2: Increase i_writecount during gfs2_setattr_size This patch calls get_write_access in a few functions. This merely increases inode->i_writecount for the duration of the function. That will ensure that any file closes won't delete the inode's multi-block reservation while the function is running. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c index 1dc9a13..93b5809 100644 --- a/fs/gfs2/bmap.c +++ b/fs/gfs2/bmap.c @@ -1286,17 +1286,26 @@ int gfs2_setattr_size(struct inode *inode, u64 newsize) if (ret) return ret; + ret = get_write_access(inode); + if (ret) + return ret; + inode_dio_wait(inode); ret = gfs2_rs_alloc(GFS2_I(inode)); if (ret) - return ret; + goto out; oldsize = inode->i_size; - if (newsize >= oldsize) - return do_grow(inode, newsize); + if (newsize >= oldsize) { + ret = do_grow(inode, newsize); + goto out; + } - return do_shrink(inode, oldsize, newsize); + ret = do_shrink(inode, oldsize, newsize); +out: + put_write_access(inode); + return ret; } int gfs2_truncatei_resume(struct gfs2_inode *ip) diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c index acd1676..ad0dc38 100644 --- a/fs/gfs2/file.c +++ b/fs/gfs2/file.c @@ -402,16 +402,20 @@ static int gfs2_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf) /* Update file times before taking page lock */ file_update_time(vma->vm_file); + ret = get_write_access(inode); + if (ret) + goto out; + ret = gfs2_rs_alloc(ip); if (ret) - return ret; + goto out_write_access; gfs2_size_hint(vma->vm_file, pos, PAGE_CACHE_SIZE); gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh); ret = gfs2_glock_nq(&gh); if (ret) - goto out; + goto out_uninit; set_bit(GLF_DIRTY, &ip->i_gl->gl_flags); set_bit(GIF_SW_PAGED, &ip->i_flags); @@ -480,12 +484,15 @@ out_quota_unlock: gfs2_quota_unlock(ip); out_unlock: gfs2_glock_dq(&gh); -out: +out_uninit: gfs2_holder_uninit(&gh); if (ret == 0) { set_page_dirty(page); wait_for_stable_page(page); } +out_write_access: + put_write_access(inode); +out: sb_end_pagefault(inode->i_sb); return block_page_mkwrite_return(ret); } @@ -594,10 +601,10 @@ static int gfs2_release(struct inode *inode, struct file *file) kfree(file->private_data); file->private_data = NULL; - if ((file->f_mode & FMODE_WRITE) && - (atomic_read(&inode->i_writecount) == 1)) - gfs2_rs_delete(ip); + if (!(file->f_mode & FMODE_WRITE)) + return 0; + gfs2_rs_delete(ip); return 0; } diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index 5232525..9809156 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -638,8 +638,10 @@ void gfs2_rs_deltree(struct gfs2_blkreserv *rs) */ void gfs2_rs_delete(struct gfs2_inode *ip) { + struct inode *inode = &ip->i_inode; + down_write(&ip->i_rw_mutex); - if (ip->i_res) { + if (ip->i_res && atomic_read(&inode->i_writecount) <= 1) { gfs2_rs_deltree(ip->i_res); BUG_ON(ip->i_res->rs_free); kmem_cache_free(gfs2_rsrv_cachep, ip->i_res); -- cgit v0.10.2 From e8830d8856e3ad61067dd46c05438b0d75a0441a Mon Sep 17 00:00:00 2001 From: Bob Peterson Date: Thu, 30 May 2013 09:48:56 -0400 Subject: GFS2: Fall back to vmalloc if kmalloc fails for dir hash tables This version has one more correction: the vmalloc calls are replaced by __vmalloc calls to preserve the GFP_NOFS flag. When GFS2's directory management code allocates buffers for a directory hash table, if it can't get the memory it needs, it currently gives a bad return code. Rather than giving an error, this patch allows it to use virtual memory rather than kernel memory for the hash table. This should make it possible for directories to function properly, even when kernel memory becomes very fragmented. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/dir.c b/fs/gfs2/dir.c index c3e82bd..b631c90 100644 --- a/fs/gfs2/dir.c +++ b/fs/gfs2/dir.c @@ -354,22 +354,31 @@ static __be64 *gfs2_dir_get_hash_table(struct gfs2_inode *ip) return ERR_PTR(-EIO); } - hc = kmalloc(hsize, GFP_NOFS); - ret = -ENOMEM; + hc = kmalloc(hsize, GFP_NOFS | __GFP_NOWARN); + if (hc == NULL) + hc = __vmalloc(hsize, GFP_NOFS, PAGE_KERNEL); + if (hc == NULL) return ERR_PTR(-ENOMEM); ret = gfs2_dir_read_data(ip, hc, hsize); if (ret < 0) { - kfree(hc); + if (is_vmalloc_addr(hc)) + vfree(hc); + else + kfree(hc); return ERR_PTR(ret); } spin_lock(&inode->i_lock); - if (ip->i_hash_cache) - kfree(hc); - else + if (ip->i_hash_cache) { + if (is_vmalloc_addr(hc)) + vfree(hc); + else + kfree(hc); + } else { ip->i_hash_cache = hc; + } spin_unlock(&inode->i_lock); return ip->i_hash_cache; @@ -385,7 +394,10 @@ void gfs2_dir_hash_inval(struct gfs2_inode *ip) { __be64 *hc = ip->i_hash_cache; ip->i_hash_cache = NULL; - kfree(hc); + if (is_vmalloc_addr(hc)) + vfree(hc); + else + kfree(hc); } static inline int gfs2_dirent_sentinel(const struct gfs2_dirent *dent) @@ -1113,7 +1125,10 @@ static int dir_double_exhash(struct gfs2_inode *dip) if (IS_ERR(hc)) return PTR_ERR(hc); - h = hc2 = kmalloc(hsize_bytes * 2, GFP_NOFS); + h = hc2 = kmalloc(hsize_bytes * 2, GFP_NOFS | __GFP_NOWARN); + if (hc2 == NULL) + hc2 = __vmalloc(hsize_bytes * 2, GFP_NOFS, PAGE_KERNEL); + if (!hc2) return -ENOMEM; @@ -1145,7 +1160,10 @@ fail: gfs2_dinode_out(dip, dibh->b_data); brelse(dibh); out_kfree: - kfree(hc2); + if (is_vmalloc_addr(hc2)) + vfree(hc2); + else + kfree(hc2); return error; } @@ -1846,6 +1864,8 @@ static int leaf_dealloc(struct gfs2_inode *dip, u32 index, u32 len, memset(&rlist, 0, sizeof(struct gfs2_rgrp_list)); ht = kzalloc(size, GFP_NOFS); + if (ht == NULL) + ht = vzalloc(size); if (!ht) return -ENOMEM; @@ -1933,7 +1953,10 @@ out_rlist: gfs2_rlist_free(&rlist); gfs2_quota_unhold(dip); out: - kfree(ht); + if (is_vmalloc_addr(ht)) + vfree(ht); + else + kfree(ht); return error; } -- cgit v0.10.2 From a6a4d98b0124b5d3befe8b3a99f51f1b4fcc6dcf Mon Sep 17 00:00:00 2001 From: Bob Peterson Date: Wed, 29 May 2013 11:51:52 -0400 Subject: GFS2: Don't cache iopen glocks This patch makes GFS2 immediately reclaim/delete all iopen glocks as soon as they're dequeued. This allows deleters to get an EXclusive lock on iopen so files are deleted properly instead of being set as unlinked. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c index 8833a4f..62b484e 100644 --- a/fs/gfs2/inode.c +++ b/fs/gfs2/inode.c @@ -189,6 +189,7 @@ struct inode *gfs2_inode_lookup(struct super_block *sb, unsigned int type, return inode; fail_refresh: + ip->i_iopen_gh.gh_flags |= GL_NOCACHE; ip->i_iopen_gh.gh_gl->gl_object = NULL; gfs2_glock_dq_uninit(&ip->i_iopen_gh); fail_iopen: diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c index 917c8e1..e5639de 100644 --- a/fs/gfs2/super.c +++ b/fs/gfs2/super.c @@ -1444,6 +1444,7 @@ static void gfs2_evict_inode(struct inode *inode) /* Must not read inode block until block type has been verified */ error = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, GL_SKIP, &gh); if (unlikely(error)) { + ip->i_iopen_gh.gh_flags |= GL_NOCACHE; gfs2_glock_dq_uninit(&ip->i_iopen_gh); goto out; } @@ -1514,8 +1515,10 @@ out_unlock: if (gfs2_rs_active(ip->i_res)) gfs2_rs_deltree(ip->i_res); - if (test_bit(HIF_HOLDER, &ip->i_iopen_gh.gh_iflags)) + if (test_bit(HIF_HOLDER, &ip->i_iopen_gh.gh_iflags)) { + ip->i_iopen_gh.gh_flags |= GL_NOCACHE; gfs2_glock_dq(&ip->i_iopen_gh); + } gfs2_holder_uninit(&ip->i_iopen_gh); gfs2_glock_dq_uninit(&gh); if (error && error != GLR_TRYFAILED && error != -EROFS) @@ -1534,6 +1537,7 @@ out: ip->i_gl = NULL; if (ip->i_iopen_gh.gh_gl) { ip->i_iopen_gh.gh_gl->gl_object = NULL; + ip->i_iopen_gh.gh_flags |= GL_NOCACHE; gfs2_glock_dq_uninit(&ip->i_iopen_gh); } } -- cgit v0.10.2 From bff09b099b31a31573b3c5943f805f6a08c714f0 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Thu, 30 May 2013 15:47:04 +0200 Subject: serial/imx: disable hardware flow control at startup We only want to enable hardware flow control if RTS/CTS pins are connected. Signed-off-by: Lucas Stach Signed-off-by: Markus Pargmann Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 147c9e1..8cdfbd3 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -761,6 +761,8 @@ static int imx_startup(struct uart_port *port) temp = readl(sport->port.membase + UCR2); temp |= (UCR2_RXEN | UCR2_TXEN); + if (!sport->have_rtscts) + temp |= UCR2_IRTS; writel(temp, sport->port.membase + UCR2); if (USE_IRDA(sport)) { -- cgit v0.10.2 From 60e93575476f90a72146b51283f514da655410a7 Mon Sep 17 00:00:00 2001 From: Chander Kashyap Date: Tue, 28 May 2013 18:32:07 +0530 Subject: serial: samsung: enable clock before clearing pending interrupts during init Ensure that the uart controller clock is enabled prior to writing to the interrupt mask and pending registers in the s3c24xx_serial_init_port function. Signed-off-by: Chander Kashyap Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 8942941..0c8a9fa 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1166,6 +1166,18 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, ourport->tx_irq = ret; ourport->clk = clk_get(&platdev->dev, "uart"); + if (IS_ERR(ourport->clk)) { + pr_err("%s: Controller clock not found\n", + dev_name(&platdev->dev)); + return PTR_ERR(ourport->clk); + } + + ret = clk_prepare_enable(ourport->clk); + if (ret) { + pr_err("uart: clock failed to prepare+enable: %d\n", ret); + clk_put(ourport->clk); + return ret; + } /* Keep all interrupts masked and cleared */ if (s3c24xx_serial_has_interrupt_mask(port)) { @@ -1180,6 +1192,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, /* reset the fifos (and setup the uart) */ s3c24xx_serial_resetport(port, cfg); + clk_disable_unprepare(ourport->clk); return 0; } -- cgit v0.10.2 From 317a68427d4b0a302ecff252fd83a00557947db8 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Mon, 3 Jun 2013 09:38:26 -0400 Subject: Revert "serial: 8250: Make SERIAL_8250_RUNTIME_UARTS work correctly" This reverts commit cfcec52e9781f08948c6eb98198d65c45be75a70. This regresses a longstanding behaviour on X86 systems, which end up with PCI serial ports moving between ttyS4 and ttyS0 when you bisect to opposite sides of this commit, resulting in the need to constantly modify the console setting in order to bisect across it. Please revert, we can work on solving this for ARM platforms in a less disruptive way. Signed-off-by: Kyle McMartin Cc: Karthik Manamcheri Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 46528d5..86c00b1 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -2755,7 +2755,7 @@ static void __init serial8250_isa_init_ports(void) if (nr_uarts > UART_NR) nr_uarts = UART_NR; - for (i = 0; i < UART_NR; i++) { + for (i = 0; i < nr_uarts; i++) { struct uart_8250_port *up = &serial8250_ports[i]; struct uart_port *port = &up->port; @@ -2916,7 +2916,7 @@ static int __init serial8250_console_setup(struct console *co, char *options) * if so, search for the first available port that does have * console support. */ - if (co->index >= UART_NR) + if (co->index >= nr_uarts) co->index = 0; port = &serial8250_ports[co->index].port; if (!port->iobase && !port->membase) @@ -2957,7 +2957,7 @@ int serial8250_find_port(struct uart_port *p) int line; struct uart_port *port; - for (line = 0; line < UART_NR; line++) { + for (line = 0; line < nr_uarts; line++) { port = &serial8250_ports[line].port; if (uart_match_port(p, port)) return line; @@ -3110,7 +3110,7 @@ static int serial8250_remove(struct platform_device *dev) { int i; - for (i = 0; i < UART_NR; i++) { + for (i = 0; i < nr_uarts; i++) { struct uart_8250_port *up = &serial8250_ports[i]; if (up->port.dev == &dev->dev) @@ -3178,7 +3178,7 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port * /* * First, find a port entry which matches. */ - for (i = 0; i < UART_NR; i++) + for (i = 0; i < nr_uarts; i++) if (uart_match_port(&serial8250_ports[i].port, port)) return &serial8250_ports[i]; @@ -3187,7 +3187,7 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port * * free entry. We look for one which hasn't been previously * used (indicated by zero iobase). */ - for (i = 0; i < UART_NR; i++) + for (i = 0; i < nr_uarts; i++) if (serial8250_ports[i].port.type == PORT_UNKNOWN && serial8250_ports[i].port.iobase == 0) return &serial8250_ports[i]; @@ -3196,7 +3196,7 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port * * That also failed. Last resort is to find any entry which * doesn't have a real port associated with it. */ - for (i = 0; i < UART_NR; i++) + for (i = 0; i < nr_uarts; i++) if (serial8250_ports[i].port.type == PORT_UNKNOWN) return &serial8250_ports[i]; -- cgit v0.10.2 From 6529591e3eef65f0f528a81ac169f6e294b947a7 Mon Sep 17 00:00:00 2001 From: Robert Butora Date: Fri, 31 May 2013 18:09:51 +0300 Subject: USB: Serial: cypress_M8: Enable FRWD Dongle hidcom device The patch adds a new HIDCOM device and does not affect other devices driven by the cypress_M8 module. Changes are: - add VendorID ProductID to device tables - skip unstable speed check because FRWD uses 115200bps - skip reset at probe which is an issue workaround for this particular device. Signed-off-by: Robert Butora Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index d341555..0821201 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -65,6 +65,7 @@ static const struct usb_device_id id_table_earthmate[] = { static const struct usb_device_id id_table_cyphidcomrs232[] = { { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) }, + { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) }, { } /* Terminating entry */ }; @@ -78,6 +79,7 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) }, { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) }, + { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) }, { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) }, { } /* Terminating entry */ }; @@ -229,6 +231,12 @@ static struct usb_serial_driver * const serial_drivers[] = { * Cypress serial helper functions *****************************************************************************/ +/* FRWD Dongle hidcom needs to skip reset and speed checks */ +static inline bool is_frwd(struct usb_device *dev) +{ + return ((le16_to_cpu(dev->descriptor.idVendor) == VENDOR_ID_FRWD) && + (le16_to_cpu(dev->descriptor.idProduct) == PRODUCT_ID_CYPHIDCOM_FRWD)); +} static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate) { @@ -238,6 +246,10 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate) if (unstable_bauds) return new_rate; + /* FRWD Dongle uses 115200 bps */ + if (is_frwd(port->serial->dev)) + return new_rate; + /* * The general purpose firmware for the Cypress M8 allows for * a maximum speed of 57600bps (I have no idea whether DeLorme @@ -448,7 +460,11 @@ static int cypress_generic_port_probe(struct usb_serial_port *port) return -ENOMEM; } - usb_reset_configuration(serial->dev); + /* Skip reset for FRWD device. It is a workaound: + device hangs if it receives SET_CONFIGURE in Configured + state. */ + if (!is_frwd(serial->dev)) + usb_reset_configuration(serial->dev); priv->cmd_ctrl = 0; priv->line_control = 0; diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h index 67cf608..b461311 100644 --- a/drivers/usb/serial/cypress_m8.h +++ b/drivers/usb/serial/cypress_m8.h @@ -24,6 +24,10 @@ #define VENDOR_ID_CYPRESS 0x04b4 #define PRODUCT_ID_CYPHIDCOM 0x5500 +/* FRWD Dongle - a GPS sports watch */ +#define VENDOR_ID_FRWD 0x6737 +#define PRODUCT_ID_CYPHIDCOM_FRWD 0x0001 + /* Powercom UPS, chip CY7C63723 */ #define VENDOR_ID_POWERCOM 0x0d9f #define PRODUCT_ID_UPS 0x0002 -- cgit v0.10.2 From 8a2f132a01c2dd4c3905fa560f92019761ed72b1 Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Fri, 24 May 2013 12:01:51 +0200 Subject: USB: serial: Add Option GTM681W to qcserial device table. The Option GTM681W uses a qualcomm chip and can be served by the qcserial device driver. Signed-off-by: Richard Weinberger Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 59b32b7..bd794b4 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -118,6 +118,7 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */ {USB_DEVICE(0x12D1, 0x14F0)}, /* Sony Gobi 3000 QDL */ {USB_DEVICE(0x12D1, 0x14F1)}, /* Sony Gobi 3000 Composite */ + {USB_DEVICE(0x0AF0, 0x8120)}, /* Option GTM681W */ /* non Gobi Qualcomm serial devices */ {USB_DEVICE_INTERFACE_NUMBER(0x0f3d, 0x68a2, 0)}, /* Sierra Wireless MC7700 Device Management */ -- cgit v0.10.2 From e9d98ddc0a4e4e11603c818bf234644031bff384 Mon Sep 17 00:00:00 2001 From: Arun Kumar K Date: Wed, 24 Apr 2013 09:41:53 -0300 Subject: [media] s5p-mfc: Update v6 encoder buffer alloc MFC v6 needs minimum number of output buffers to be queued for encoder depending on the stream type and profile. The patch modifies the driver so that encoding cannot be started with lesser number of OUTPUT buffers than required. This also fixes the crash happeninig during multi instance encoder-decoder simultaneous run due to memory allocation happening from interrupt context. Signed-off-by: Arun Kumar K Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c index 01f9ae0..3b2345e 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c @@ -397,7 +397,7 @@ static void s5p_mfc_handle_frame(struct s5p_mfc_ctx *ctx, leave_handle_frame: spin_unlock_irqrestore(&dev->irqlock, flags); if ((ctx->src_queue_cnt == 0 && ctx->state != MFCINST_FINISHING) - || ctx->dst_queue_cnt < ctx->dpb_count) + || ctx->dst_queue_cnt < ctx->pb_count) clear_work_bit(ctx); s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev); wake_up_ctx(ctx, reason, err); @@ -473,7 +473,7 @@ static void s5p_mfc_handle_seq_done(struct s5p_mfc_ctx *ctx, s5p_mfc_hw_call(dev->mfc_ops, dec_calc_dpb_size, ctx); - ctx->dpb_count = s5p_mfc_hw_call(dev->mfc_ops, get_dpb_count, + ctx->pb_count = s5p_mfc_hw_call(dev->mfc_ops, get_dpb_count, dev); ctx->mv_count = s5p_mfc_hw_call(dev->mfc_ops, get_mv_count, dev); diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h index 202d1d7..975d1b2 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h @@ -138,6 +138,7 @@ enum s5p_mfc_inst_state { MFCINST_INIT = 100, MFCINST_GOT_INST, MFCINST_HEAD_PARSED, + MFCINST_HEAD_PRODUCED, MFCINST_BUFS_SET, MFCINST_RUNNING, MFCINST_FINISHING, @@ -602,7 +603,7 @@ struct s5p_mfc_ctx { int after_packed_pb; int sei_fp_parse; - int dpb_count; + int pb_count; int total_dpb_count; int mv_count; /* Buffers */ diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c index 4af53bd..00b0703 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c @@ -210,11 +210,11 @@ static int s5p_mfc_ctx_ready(struct s5p_mfc_ctx *ctx) /* Context is to decode a frame */ if (ctx->src_queue_cnt >= 1 && ctx->state == MFCINST_RUNNING && - ctx->dst_queue_cnt >= ctx->dpb_count) + ctx->dst_queue_cnt >= ctx->pb_count) return 1; /* Context is to return last frame */ if (ctx->state == MFCINST_FINISHING && - ctx->dst_queue_cnt >= ctx->dpb_count) + ctx->dst_queue_cnt >= ctx->pb_count) return 1; /* Context is to set buffers */ if (ctx->src_queue_cnt >= 1 && @@ -224,7 +224,7 @@ static int s5p_mfc_ctx_ready(struct s5p_mfc_ctx *ctx) /* Resolution change */ if ((ctx->state == MFCINST_RES_CHANGE_INIT || ctx->state == MFCINST_RES_CHANGE_FLUSH) && - ctx->dst_queue_cnt >= ctx->dpb_count) + ctx->dst_queue_cnt >= ctx->pb_count) return 1; if (ctx->state == MFCINST_RES_CHANGE_END && ctx->src_queue_cnt >= 1) @@ -537,7 +537,7 @@ static int vidioc_reqbufs(struct file *file, void *priv, mfc_err("vb2_reqbufs on capture failed\n"); return ret; } - if (reqbufs->count < ctx->dpb_count) { + if (reqbufs->count < ctx->pb_count) { mfc_err("Not enough buffers allocated\n"); reqbufs->count = 0; s5p_mfc_clock_on(); @@ -751,7 +751,7 @@ static int s5p_mfc_dec_g_v_ctrl(struct v4l2_ctrl *ctrl) case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE: if (ctx->state >= MFCINST_HEAD_PARSED && ctx->state < MFCINST_ABORT) { - ctrl->val = ctx->dpb_count; + ctrl->val = ctx->pb_count; break; } else if (ctx->state != MFCINST_INIT) { v4l2_err(&dev->v4l2_dev, "Decoding not initialised\n"); @@ -763,7 +763,7 @@ static int s5p_mfc_dec_g_v_ctrl(struct v4l2_ctrl *ctrl) S5P_MFC_R2H_CMD_SEQ_DONE_RET, 0); if (ctx->state >= MFCINST_HEAD_PARSED && ctx->state < MFCINST_ABORT) { - ctrl->val = ctx->dpb_count; + ctrl->val = ctx->pb_count; } else { v4l2_err(&dev->v4l2_dev, "Decoding not initialised\n"); return -EINVAL; @@ -924,10 +924,10 @@ static int s5p_mfc_queue_setup(struct vb2_queue *vq, /* Output plane count is 2 - one for Y and one for CbCr */ *plane_count = 2; /* Setup buffer count */ - if (*buf_count < ctx->dpb_count) - *buf_count = ctx->dpb_count; - if (*buf_count > ctx->dpb_count + MFC_MAX_EXTRA_DPB) - *buf_count = ctx->dpb_count + MFC_MAX_EXTRA_DPB; + if (*buf_count < ctx->pb_count) + *buf_count = ctx->pb_count; + if (*buf_count > ctx->pb_count + MFC_MAX_EXTRA_DPB) + *buf_count = ctx->pb_count + MFC_MAX_EXTRA_DPB; if (*buf_count > MFC_MAX_BUFFERS) *buf_count = MFC_MAX_BUFFERS; } else { diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c index 4f6b553..5e019aa 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c @@ -592,7 +592,7 @@ static int s5p_mfc_ctx_ready(struct s5p_mfc_ctx *ctx) return 1; /* context is ready to encode a frame */ if ((ctx->state == MFCINST_RUNNING || - ctx->state == MFCINST_HEAD_PARSED) && + ctx->state == MFCINST_HEAD_PRODUCED) && ctx->src_queue_cnt >= 1 && ctx->dst_queue_cnt >= 1) return 1; /* context is ready to encode remaining frames */ @@ -649,6 +649,7 @@ static int enc_post_seq_start(struct s5p_mfc_ctx *ctx) struct s5p_mfc_enc_params *p = &ctx->enc_params; struct s5p_mfc_buf *dst_mb; unsigned long flags; + unsigned int enc_pb_count; if (p->seq_hdr_mode == V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE) { spin_lock_irqsave(&dev->irqlock, flags); @@ -661,18 +662,19 @@ static int enc_post_seq_start(struct s5p_mfc_ctx *ctx) vb2_buffer_done(dst_mb->b, VB2_BUF_STATE_DONE); spin_unlock_irqrestore(&dev->irqlock, flags); } - if (IS_MFCV6(dev)) { - ctx->state = MFCINST_HEAD_PARSED; /* for INIT_BUFFER cmd */ - } else { + + if (!IS_MFCV6(dev)) { ctx->state = MFCINST_RUNNING; if (s5p_mfc_ctx_ready(ctx)) set_work_bit_irqsave(ctx); s5p_mfc_hw_call(dev->mfc_ops, try_run, dev); - } - - if (IS_MFCV6(dev)) - ctx->dpb_count = s5p_mfc_hw_call(dev->mfc_ops, + } else { + enc_pb_count = s5p_mfc_hw_call(dev->mfc_ops, get_enc_dpb_count, dev); + if (ctx->pb_count < enc_pb_count) + ctx->pb_count = enc_pb_count; + ctx->state = MFCINST_HEAD_PRODUCED; + } return 0; } @@ -1055,15 +1057,13 @@ static int vidioc_reqbufs(struct file *file, void *priv, } ctx->capture_state = QUEUE_BUFS_REQUESTED; - if (!IS_MFCV6(dev)) { - ret = s5p_mfc_hw_call(ctx->dev->mfc_ops, - alloc_codec_buffers, ctx); - if (ret) { - mfc_err("Failed to allocate encoding buffers\n"); - reqbufs->count = 0; - ret = vb2_reqbufs(&ctx->vq_dst, reqbufs); - return -ENOMEM; - } + ret = s5p_mfc_hw_call(ctx->dev->mfc_ops, + alloc_codec_buffers, ctx); + if (ret) { + mfc_err("Failed to allocate encoding buffers\n"); + reqbufs->count = 0; + ret = vb2_reqbufs(&ctx->vq_dst, reqbufs); + return -ENOMEM; } } else if (reqbufs->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { if (ctx->output_state != QUEUE_FREE) { @@ -1071,6 +1071,19 @@ static int vidioc_reqbufs(struct file *file, void *priv, ctx->output_state); return -EINVAL; } + + if (IS_MFCV6(dev)) { + /* Check for min encoder buffers */ + if (ctx->pb_count && + (reqbufs->count < ctx->pb_count)) { + reqbufs->count = ctx->pb_count; + mfc_debug(2, "Minimum %d output buffers needed\n", + ctx->pb_count); + } else { + ctx->pb_count = reqbufs->count; + } + } + ret = vb2_reqbufs(&ctx->vq_src, reqbufs); if (ret != 0) { mfc_err("error in vb2_reqbufs() for E(S)\n"); @@ -1760,11 +1773,28 @@ static int s5p_mfc_start_streaming(struct vb2_queue *q, unsigned int count) struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv); struct s5p_mfc_dev *dev = ctx->dev; + if (IS_MFCV6(dev) && (q->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)) { + + if ((ctx->state == MFCINST_GOT_INST) && + (dev->curr_ctx == ctx->num) && dev->hw_lock) { + s5p_mfc_wait_for_done_ctx(ctx, + S5P_MFC_R2H_CMD_SEQ_DONE_RET, + 0); + } + + if (ctx->src_bufs_cnt < ctx->pb_count) { + mfc_err("Need minimum %d OUTPUT buffers\n", + ctx->pb_count); + return -EINVAL; + } + } + v4l2_ctrl_handler_setup(&ctx->ctrl_handler); /* If context is ready then dev = work->data;schedule it to run */ if (s5p_mfc_ctx_ready(ctx)) set_work_bit_irqsave(ctx); s5p_mfc_hw_call(dev->mfc_ops, try_run, dev); + return 0; } diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c index db57f25..383ae77 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c @@ -167,7 +167,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx) S5P_FIMV_SCRATCH_BUFFER_ALIGN_V6); ctx->bank1.size = ctx->scratch_buf_size + ctx->tmv_buffer_size + - (ctx->dpb_count * (ctx->luma_dpb_size + + (ctx->pb_count * (ctx->luma_dpb_size + ctx->chroma_dpb_size + ctx->me_buffer_size)); ctx->bank2.size = 0; break; @@ -181,7 +181,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx) S5P_FIMV_SCRATCH_BUFFER_ALIGN_V6); ctx->bank1.size = ctx->scratch_buf_size + ctx->tmv_buffer_size + - (ctx->dpb_count * (ctx->luma_dpb_size + + (ctx->pb_count * (ctx->luma_dpb_size + ctx->chroma_dpb_size + ctx->me_buffer_size)); ctx->bank2.size = 0; break; @@ -198,7 +198,6 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx) } BUG_ON(ctx->bank1.dma & ((1 << MFC_BANK1_ALIGN_ORDER) - 1)); } - return 0; } @@ -497,7 +496,7 @@ static int s5p_mfc_set_enc_ref_buffer_v6(struct s5p_mfc_ctx *ctx) mfc_debug(2, "Buf1: %p (%d)\n", (void *)buf_addr1, buf_size1); - for (i = 0; i < ctx->dpb_count; i++) { + for (i = 0; i < ctx->pb_count; i++) { WRITEL(buf_addr1, S5P_FIMV_E_LUMA_DPB_V6 + (4 * i)); buf_addr1 += ctx->luma_dpb_size; WRITEL(buf_addr1, S5P_FIMV_E_CHROMA_DPB_V6 + (4 * i)); @@ -520,7 +519,7 @@ static int s5p_mfc_set_enc_ref_buffer_v6(struct s5p_mfc_ctx *ctx) buf_size1 -= ctx->tmv_buffer_size; mfc_debug(2, "Buf1: %u, buf_size1: %d (ref frames %d)\n", - buf_addr1, buf_size1, ctx->dpb_count); + buf_addr1, buf_size1, ctx->pb_count); if (buf_size1 < 0) { mfc_debug(2, "Not enough memory has been allocated.\n"); return -ENOMEM; @@ -1522,22 +1521,6 @@ static inline int s5p_mfc_run_init_enc_buffers(struct s5p_mfc_ctx *ctx) struct s5p_mfc_dev *dev = ctx->dev; int ret; - ret = s5p_mfc_alloc_codec_buffers_v6(ctx); - if (ret) { - mfc_err("Failed to allocate encoding buffers.\n"); - return -ENOMEM; - } - - /* Header was generated now starting processing - * First set the reference frame buffers - */ - if (ctx->capture_state != QUEUE_BUFS_REQUESTED) { - mfc_err("It seems that destionation buffers were not\n" - "requested.MFC requires that header should be generated\n" - "before allocating codec buffer.\n"); - return -EAGAIN; - } - dev->curr_ctx = ctx->num; s5p_mfc_clean_ctx_int_flags(ctx); ret = s5p_mfc_set_enc_ref_buffer_v6(ctx); @@ -1582,7 +1565,7 @@ static void s5p_mfc_try_run_v6(struct s5p_mfc_dev *dev) mfc_debug(1, "Seting new context to %p\n", ctx); /* Got context to run in ctx */ mfc_debug(1, "ctx->dst_queue_cnt=%d ctx->dpb_count=%d ctx->src_queue_cnt=%d\n", - ctx->dst_queue_cnt, ctx->dpb_count, ctx->src_queue_cnt); + ctx->dst_queue_cnt, ctx->pb_count, ctx->src_queue_cnt); mfc_debug(1, "ctx->state=%d\n", ctx->state); /* Last frame has already been sent to MFC * Now obtaining frames from MFC buffer */ @@ -1647,7 +1630,7 @@ static void s5p_mfc_try_run_v6(struct s5p_mfc_dev *dev) case MFCINST_GOT_INST: s5p_mfc_run_init_enc(ctx); break; - case MFCINST_HEAD_PARSED: /* Only for MFC6.x */ + case MFCINST_HEAD_PRODUCED: ret = s5p_mfc_run_init_enc_buffers(ctx); break; default: -- cgit v0.10.2 From 412cb87d28a1f299ee82fe1c8bfe6cbeec9a4655 Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Mon, 20 May 2013 23:47:29 -0300 Subject: [media] media: vb2: return for polling if a buffer is available The vb2_poll() does not need to wait next vb_buffer_done() if there is already a buffer in done_list of queue, but current vb2_poll() always waits. So done_list is checked before calling poll_wait(). Signed-off-by: Seung-Woo Kim Acked-by: Marek Szyprowski Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c index 7d833ee..e3bdc3b 100644 --- a/drivers/media/v4l2-core/videobuf2-core.c +++ b/drivers/media/v4l2-core/videobuf2-core.c @@ -2014,7 +2014,8 @@ unsigned int vb2_poll(struct vb2_queue *q, struct file *file, poll_table *wait) if (list_empty(&q->queued_list)) return res | POLLERR; - poll_wait(file, &q->done_wq, wait); + if (list_empty(&q->done_list)) + poll_wait(file, &q->done_wq, wait); /* * Take first buffer available for dequeuing. -- cgit v0.10.2 From 57183467c09555d985ae62b79c754e64279381df Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Mon, 20 May 2013 23:47:30 -0300 Subject: [media] media: v4l2-mem2mem: return for polling if a buffer is available The v4l2_m2m_poll() does not need to wait if there is already a buffer in done_list of source and destination queues, but current v4l2_m2m_poll() always waits. So done_list of each queue is checked before calling poll_wait(). Signed-off-by: Seung-Woo Kim Acked-by: Marek Szyprowski Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c index 66f599f..9ac39b5 100644 --- a/drivers/media/v4l2-core/v4l2-mem2mem.c +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c @@ -486,8 +486,10 @@ unsigned int v4l2_m2m_poll(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, if (m2m_ctx->m2m_dev->m2m_ops->unlock) m2m_ctx->m2m_dev->m2m_ops->unlock(m2m_ctx->priv); - poll_wait(file, &src_q->done_wq, wait); - poll_wait(file, &dst_q->done_wq, wait); + if (list_empty(&src_q->done_list)) + poll_wait(file, &src_q->done_wq, wait); + if (list_empty(&dst_q->done_list)) + poll_wait(file, &dst_q->done_wq, wait); if (m2m_ctx->m2m_dev->m2m_ops->lock) m2m_ctx->m2m_dev->m2m_ops->lock(m2m_ctx->priv); -- cgit v0.10.2 From 8b94ca61d7065fa7fa7bdb08ce31a9385be5205b Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 21 May 2013 04:16:28 -0300 Subject: [media] v4l2-mem2mem: add v4l2_m2m_create_bufs helper Signed-off-by: Philipp Zabel Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c index 9ac39b5..a756170 100644 --- a/drivers/media/v4l2-core/v4l2-mem2mem.c +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c @@ -372,6 +372,20 @@ int v4l2_m2m_dqbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, EXPORT_SYMBOL_GPL(v4l2_m2m_dqbuf); /** + * v4l2_m2m_create_bufs() - create a source or destination buffer, depending + * on the type + */ +int v4l2_m2m_create_bufs(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, + struct v4l2_create_buffers *create) +{ + struct vb2_queue *vq; + + vq = v4l2_m2m_get_vq(m2m_ctx, create->format.type); + return vb2_create_bufs(vq, create); +} +EXPORT_SYMBOL_GPL(v4l2_m2m_create_bufs); + +/** * v4l2_m2m_expbuf() - export a source or destination buffer, depending on * the type */ diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h index d3eef01..0f4555b 100644 --- a/include/media/v4l2-mem2mem.h +++ b/include/media/v4l2-mem2mem.h @@ -110,6 +110,8 @@ int v4l2_m2m_qbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, struct v4l2_buffer *buf); int v4l2_m2m_dqbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, struct v4l2_buffer *buf); +int v4l2_m2m_create_bufs(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, + struct v4l2_create_buffers *create); int v4l2_m2m_expbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, struct v4l2_exportbuffer *eb); -- cgit v0.10.2 From 8fdf94a254ab2f90ae79b82e56b1f8e9d7582026 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 21 May 2013 04:16:29 -0300 Subject: [media] coda: v4l2-compliance fix: add VIDIOC_CREATE_BUFS support Signed-off-by: Philipp Zabel Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/coda.c b/drivers/media/platform/coda.c index 5612329..f82e1c6 100644 --- a/drivers/media/platform/coda.c +++ b/drivers/media/platform/coda.c @@ -571,6 +571,14 @@ static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *buf) return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf); } +static int vidioc_create_bufs(struct file *file, void *priv, + struct v4l2_create_buffers *create) +{ + struct coda_ctx *ctx = fh_to_ctx(priv); + + return v4l2_m2m_create_bufs(file, ctx->m2m_ctx, create); +} + static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type type) { @@ -605,6 +613,7 @@ static const struct v4l2_ioctl_ops coda_ioctl_ops = { .vidioc_qbuf = vidioc_qbuf, .vidioc_dqbuf = vidioc_dqbuf, + .vidioc_create_bufs = vidioc_create_bufs, .vidioc_streamon = vidioc_streamon, .vidioc_streamoff = vidioc_streamoff, -- cgit v0.10.2 From b730627ad65f023dd9ce83047a3076330ebaefe5 Mon Sep 17 00:00:00 2001 From: John Sheu Date: Thu, 23 May 2013 20:41:48 -0300 Subject: [media] v4l2: mem2mem: save irq flags correctly Save flags correctly when taking spinlocks in v4l2_m2m_try_schedule. Signed-off-by: John Sheu Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c index a756170..e96497f 100644 --- a/drivers/media/v4l2-core/v4l2-mem2mem.c +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c @@ -205,7 +205,7 @@ static void v4l2_m2m_try_run(struct v4l2_m2m_dev *m2m_dev) static void v4l2_m2m_try_schedule(struct v4l2_m2m_ctx *m2m_ctx) { struct v4l2_m2m_dev *m2m_dev; - unsigned long flags_job, flags; + unsigned long flags_job, flags_out, flags_cap; m2m_dev = m2m_ctx->m2m_dev; dprintk("Trying to schedule a job for m2m_ctx: %p\n", m2m_ctx); @@ -223,23 +223,26 @@ static void v4l2_m2m_try_schedule(struct v4l2_m2m_ctx *m2m_ctx) return; } - spin_lock_irqsave(&m2m_ctx->out_q_ctx.rdy_spinlock, flags); + spin_lock_irqsave(&m2m_ctx->out_q_ctx.rdy_spinlock, flags_out); if (list_empty(&m2m_ctx->out_q_ctx.rdy_queue)) { - spin_unlock_irqrestore(&m2m_ctx->out_q_ctx.rdy_spinlock, flags); + spin_unlock_irqrestore(&m2m_ctx->out_q_ctx.rdy_spinlock, + flags_out); spin_unlock_irqrestore(&m2m_dev->job_spinlock, flags_job); dprintk("No input buffers available\n"); return; } - spin_lock_irqsave(&m2m_ctx->cap_q_ctx.rdy_spinlock, flags); + spin_lock_irqsave(&m2m_ctx->cap_q_ctx.rdy_spinlock, flags_cap); if (list_empty(&m2m_ctx->cap_q_ctx.rdy_queue)) { - spin_unlock_irqrestore(&m2m_ctx->cap_q_ctx.rdy_spinlock, flags); - spin_unlock_irqrestore(&m2m_ctx->out_q_ctx.rdy_spinlock, flags); + spin_unlock_irqrestore(&m2m_ctx->cap_q_ctx.rdy_spinlock, + flags_cap); + spin_unlock_irqrestore(&m2m_ctx->out_q_ctx.rdy_spinlock, + flags_out); spin_unlock_irqrestore(&m2m_dev->job_spinlock, flags_job); dprintk("No output buffers available\n"); return; } - spin_unlock_irqrestore(&m2m_ctx->cap_q_ctx.rdy_spinlock, flags); - spin_unlock_irqrestore(&m2m_ctx->out_q_ctx.rdy_spinlock, flags); + spin_unlock_irqrestore(&m2m_ctx->cap_q_ctx.rdy_spinlock, flags_cap); + spin_unlock_irqrestore(&m2m_ctx->out_q_ctx.rdy_spinlock, flags_out); if (m2m_dev->m2m_ops->job_ready && (!m2m_dev->m2m_ops->job_ready(m2m_ctx->priv))) { -- cgit v0.10.2 From 644469aefbac3c007284b43ac932ba6f1794a110 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Sat, 25 May 2013 07:25:55 -0300 Subject: [media] s5p-mfc: Remove unused s5p_mfc_get_decoded_status_v6() function MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fixes following compilation warning: CC [M] drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.o drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c:1733:12: warning: ‘s5p_mfc_get_decoded_status_v6’ defined but not used It assigns existing but not used s5p_mfc_get_dec_status_v6() function to the get_dec_status callback. It seems the get_dec_status callback is not used anyway, as there is no corresponding s5p_mfc_hw_call(). Signed-off-by: Sylwester Nawrocki Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c index 383ae77..5eeaecb 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c @@ -62,12 +62,6 @@ static void s5p_mfc_release_dec_desc_buffer_v6(struct s5p_mfc_ctx *ctx) /* NOP */ } -static int s5p_mfc_get_dec_status_v6(struct s5p_mfc_dev *dev) -{ - /* NOP */ - return -1; -} - /* Allocate codec buffers */ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx) { @@ -1713,7 +1707,7 @@ static int s5p_mfc_get_dspl_status_v6(struct s5p_mfc_dev *dev) return mfc_read(dev, S5P_FIMV_D_DISPLAY_STATUS_V6); } -static int s5p_mfc_get_decoded_status_v6(struct s5p_mfc_dev *dev) +static int s5p_mfc_get_dec_status_v6(struct s5p_mfc_dev *dev) { return mfc_read(dev, S5P_FIMV_D_DECODED_STATUS_V6); } -- cgit v0.10.2 From fc906b6d189f26e869b11b94eaa9a733b3950740 Mon Sep 17 00:00:00 2001 From: Arun Kumar K Date: Mon, 27 May 2013 03:39:29 -0300 Subject: [media] s5p-mfc: Remove special clock usage in driver MFC uses two clocks - MFC gate clock and special clock which is named as "sclk_mfc" in exynos4 and "aclk_333" in exynos5 SoC. The driver was doing just a clk_prepare on this special clock without a clk_enable call. As this sclk is the parent of gate clock, it gets prepared and enabled along with the gate clock. So there is no need for the driver to use this sclk. This patch removes the sclk usage from driver. Signed-off-by: Arun Kumar K Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c index 3b2345e..78280eb 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c @@ -1362,7 +1362,6 @@ static struct s5p_mfc_variant mfc_drvdata_v5 = { .port_num = MFC_NUM_PORTS, .buf_size = &buf_size_v5, .buf_align = &mfc_buf_align_v5, - .mclk_name = "sclk_mfc", .fw_name = "s5p-mfc.fw", }; @@ -1389,7 +1388,6 @@ static struct s5p_mfc_variant mfc_drvdata_v6 = { .port_num = MFC_NUM_PORTS_V6, .buf_size = &buf_size_v6, .buf_align = &mfc_buf_align_v6, - .mclk_name = "aclk_333", .fw_name = "s5p-mfc-v6.fw", }; diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h index 975d1b2..4e81ab8 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h @@ -232,7 +232,6 @@ struct s5p_mfc_variant { unsigned int port_num; struct s5p_mfc_buf_size *buf_size; struct s5p_mfc_buf_align *buf_align; - char *mclk_name; char *fw_name; }; diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c index 6aa38a5..cab6e0b 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c @@ -50,19 +50,6 @@ int s5p_mfc_init_pm(struct s5p_mfc_dev *dev) goto err_p_ip_clk; } - pm->clock = clk_get(&dev->plat_dev->dev, dev->variant->mclk_name); - if (IS_ERR(pm->clock)) { - mfc_err("Failed to get MFC clock\n"); - ret = PTR_ERR(pm->clock); - goto err_g_ip_clk_2; - } - - ret = clk_prepare(pm->clock); - if (ret) { - mfc_err("Failed to prepare MFC clock\n"); - goto err_p_ip_clk_2; - } - atomic_set(&pm->power, 0); #ifdef CONFIG_PM_RUNTIME pm->device = &dev->plat_dev->dev; @@ -72,10 +59,6 @@ int s5p_mfc_init_pm(struct s5p_mfc_dev *dev) atomic_set(&clk_ref, 0); #endif return 0; -err_p_ip_clk_2: - clk_put(pm->clock); -err_g_ip_clk_2: - clk_unprepare(pm->clock_gate); err_p_ip_clk: clk_put(pm->clock_gate); err_g_ip_clk: @@ -86,8 +69,6 @@ void s5p_mfc_final_pm(struct s5p_mfc_dev *dev) { clk_unprepare(pm->clock_gate); clk_put(pm->clock_gate); - clk_unprepare(pm->clock); - clk_put(pm->clock); #ifdef CONFIG_PM_RUNTIME pm_runtime_disable(pm->device); #endif -- cgit v0.10.2 From ac5f867fbfbd1ff5a43e796ed470deff42b630d2 Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Tue, 28 May 2013 03:26:14 -0300 Subject: [media] s5p-mfc: separate encoder parameters for h264 and mpeg4 This patch fixes a bug which caused overwriting h264 codec parameters by mpeg4 parameters during V4L2 control setting. Signed-off-by: Andrzej Hajda Signed-off-by: Kyungmin Park Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h index 4e81ab8..ef4074c 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h @@ -438,7 +438,7 @@ struct s5p_mfc_enc_params { u32 rc_framerate_num; u32 rc_framerate_denom; - union { + struct { struct s5p_mfc_h264_enc_params h264; struct s5p_mfc_mpeg4_enc_params mpeg4; } codec; -- cgit v0.10.2 From 69c9fe6f4afae54cad12635bdb8e90e7d832e240 Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Tue, 28 May 2013 03:26:15 -0300 Subject: [media] s5p-mfc: v4l2 controls setup routine moved to initialization code Callback .start_streaming is called once for every queue, so v4l2_ctrl_handler_setup was called twice during stream start. Moving v4l2_ctrl_handler_setup to context initialization reduces numbers of calls and seems to be more consistent with API. Signed-off-by: Andrzej Hajda Signed-off-by: Kyungmin Park Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c index 5e019aa..5d97a98 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c @@ -1789,7 +1789,6 @@ static int s5p_mfc_start_streaming(struct vb2_queue *q, unsigned int count) } } - v4l2_ctrl_handler_setup(&ctx->ctrl_handler); /* If context is ready then dev = work->data;schedule it to run */ if (s5p_mfc_ctx_ready(ctx)) set_work_bit_irqsave(ctx); @@ -1950,6 +1949,7 @@ int s5p_mfc_enc_ctrls_setup(struct s5p_mfc_ctx *ctx) if (controls[i].is_volatile && ctx->ctrls[i]) ctx->ctrls[i]->flags |= V4L2_CTRL_FLAG_VOLATILE; } + v4l2_ctrl_handler_setup(&ctx->ctrl_handler); return 0; } -- cgit v0.10.2 From 4130eabc55f4d4d1510d2e1c556fe3e0237c5ba5 Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Tue, 28 May 2013 03:26:16 -0300 Subject: [media] s5p-mfc: added missing end-of-lines in debug messages Many debug messages missed end-of-line. Signed-off-by: Andrzej Hajda Signed-off-by: Kyungmin Park Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c index 78280eb..d12faa6 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c @@ -562,7 +562,7 @@ static void s5p_mfc_handle_stream_complete(struct s5p_mfc_ctx *ctx, struct s5p_mfc_dev *dev = ctx->dev; struct s5p_mfc_buf *mb_entry; - mfc_debug(2, "Stream completed"); + mfc_debug(2, "Stream completed\n"); s5p_mfc_clear_int_flags(dev); ctx->int_type = reason; diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_debug.h b/drivers/media/platform/s5p-mfc/s5p_mfc_debug.h index bd5cd4a..8e608f5 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_debug.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_debug.h @@ -30,8 +30,8 @@ extern int debug; #define mfc_debug(level, fmt, args...) #endif -#define mfc_debug_enter() mfc_debug(5, "enter") -#define mfc_debug_leave() mfc_debug(5, "leave") +#define mfc_debug_enter() mfc_debug(5, "enter\n") +#define mfc_debug_leave() mfc_debug(5, "leave\n") #define mfc_err(fmt, args...) \ do { \ diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c index 5d97a98..2549967 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c @@ -719,9 +719,9 @@ static int enc_post_frame_start(struct s5p_mfc_ctx *ctx) slice_type = s5p_mfc_hw_call(dev->mfc_ops, get_enc_slice_type, dev); strm_size = s5p_mfc_hw_call(dev->mfc_ops, get_enc_strm_size, dev); - mfc_debug(2, "Encoded slice type: %d", slice_type); - mfc_debug(2, "Encoded stream size: %d", strm_size); - mfc_debug(2, "Display order: %d", + mfc_debug(2, "Encoded slice type: %d\n", slice_type); + mfc_debug(2, "Encoded stream size: %d\n", strm_size); + mfc_debug(2, "Display order: %d\n", mfc_read(dev, S5P_FIMV_ENC_SI_PIC_CNT)); spin_lock_irqsave(&dev->irqlock, flags); if (slice_type >= 0) { @@ -1546,14 +1546,14 @@ int vidioc_encoder_cmd(struct file *file, void *priv, spin_lock_irqsave(&dev->irqlock, flags); if (list_empty(&ctx->src_queue)) { - mfc_debug(2, "EOS: empty src queue, entering finishing state"); + mfc_debug(2, "EOS: empty src queue, entering finishing state\n"); ctx->state = MFCINST_FINISHING; if (s5p_mfc_ctx_ready(ctx)) set_work_bit_irqsave(ctx); spin_unlock_irqrestore(&dev->irqlock, flags); s5p_mfc_hw_call(dev->mfc_ops, try_run, dev); } else { - mfc_debug(2, "EOS: marking last buffer of stream"); + mfc_debug(2, "EOS: marking last buffer of stream\n"); buf = list_entry(ctx->src_queue.prev, struct s5p_mfc_buf, list); if (buf->flags & MFC_BUF_FLAG_USED) @@ -1622,9 +1622,9 @@ static int check_vb_with_fmt(struct s5p_mfc_fmt *fmt, struct vb2_buffer *vb) mfc_err("failed to get plane cookie\n"); return -EINVAL; } - mfc_debug(2, "index: %d, plane[%d] cookie: 0x%08zx", - vb->v4l2_buf.index, i, - vb2_dma_contig_plane_dma_addr(vb, i)); + mfc_debug(2, "index: %d, plane[%d] cookie: 0x%08zx\n", + vb->v4l2_buf.index, i, + vb2_dma_contig_plane_dma_addr(vb, i)); } return 0; } diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c index 0af05a2..368582b 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c @@ -1275,8 +1275,8 @@ static int s5p_mfc_run_enc_frame(struct s5p_mfc_ctx *ctx) spin_unlock_irqrestore(&dev->irqlock, flags); dev->curr_ctx = ctx->num; s5p_mfc_clean_ctx_int_flags(ctx); - mfc_debug(2, "encoding buffer with index=%d state=%d", - src_mb ? src_mb->b->v4l2_buf.index : -1, ctx->state); + mfc_debug(2, "encoding buffer with index=%d state=%d\n", + src_mb ? src_mb->b->v4l2_buf.index : -1, ctx->state); s5p_mfc_encode_one_frame_v5(ctx); return 0; } diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c index 5eeaecb..7d4c5e1 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c @@ -442,8 +442,8 @@ static int s5p_mfc_set_enc_stream_buffer_v6(struct s5p_mfc_ctx *ctx, WRITEL(addr, S5P_FIMV_E_STREAM_BUFFER_ADDR_V6); /* 16B align */ WRITEL(size, S5P_FIMV_E_STREAM_BUFFER_SIZE_V6); - mfc_debug(2, "stream buf addr: 0x%08lx, size: 0x%d", - addr, size); + mfc_debug(2, "stream buf addr: 0x%08lx, size: 0x%d\n", + addr, size); return 0; } @@ -456,8 +456,8 @@ static void s5p_mfc_set_enc_frame_buffer_v6(struct s5p_mfc_ctx *ctx, WRITEL(y_addr, S5P_FIMV_E_SOURCE_LUMA_ADDR_V6); /* 256B align */ WRITEL(c_addr, S5P_FIMV_E_SOURCE_CHROMA_ADDR_V6); - mfc_debug(2, "enc src y buf addr: 0x%08lx", y_addr); - mfc_debug(2, "enc src c buf addr: 0x%08lx", c_addr); + mfc_debug(2, "enc src y buf addr: 0x%08lx\n", y_addr); + mfc_debug(2, "enc src c buf addr: 0x%08lx\n", c_addr); } static void s5p_mfc_get_enc_frame_buffer_v6(struct s5p_mfc_ctx *ctx, @@ -472,8 +472,8 @@ static void s5p_mfc_get_enc_frame_buffer_v6(struct s5p_mfc_ctx *ctx, enc_recon_y_addr = READL(S5P_FIMV_E_RECON_LUMA_DPB_ADDR_V6); enc_recon_c_addr = READL(S5P_FIMV_E_RECON_CHROMA_DPB_ADDR_V6); - mfc_debug(2, "recon y addr: 0x%08lx", enc_recon_y_addr); - mfc_debug(2, "recon c addr: 0x%08lx", enc_recon_c_addr); + mfc_debug(2, "recon y addr: 0x%08lx\n", enc_recon_y_addr); + mfc_debug(2, "recon c addr: 0x%08lx\n", enc_recon_c_addr); } /* Set encoding ref & codec buffer */ @@ -1424,8 +1424,8 @@ static inline int s5p_mfc_run_enc_frame(struct s5p_mfc_ctx *ctx) src_y_addr = vb2_dma_contig_plane_dma_addr(src_mb->b, 0); src_c_addr = vb2_dma_contig_plane_dma_addr(src_mb->b, 1); - mfc_debug(2, "enc src y addr: 0x%08lx", src_y_addr); - mfc_debug(2, "enc src c addr: 0x%08lx", src_c_addr); + mfc_debug(2, "enc src y addr: 0x%08lx\n", src_y_addr); + mfc_debug(2, "enc src c addr: 0x%08lx\n", src_c_addr); s5p_mfc_set_enc_frame_buffer_v6(ctx, src_y_addr, src_c_addr); diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c index cab6e0b..11d5f1d 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c @@ -79,7 +79,7 @@ int s5p_mfc_clock_on(void) int ret; #ifdef CLK_DEBUG atomic_inc(&clk_ref); - mfc_debug(3, "+ %d", atomic_read(&clk_ref)); + mfc_debug(3, "+ %d\n", atomic_read(&clk_ref)); #endif ret = clk_enable(pm->clock_gate); return ret; @@ -89,7 +89,7 @@ void s5p_mfc_clock_off(void) { #ifdef CLK_DEBUG atomic_dec(&clk_ref); - mfc_debug(3, "- %d", atomic_read(&clk_ref)); + mfc_debug(3, "- %d\n", atomic_read(&clk_ref)); #endif clk_disable(pm->clock_gate); } -- cgit v0.10.2 From d1c1cc664342cf197afeea4b0dd8145d1edee35c Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Wed, 29 May 2013 00:10:00 -0300 Subject: [media] s5p-mfc: Add NULL check for allocated buffer In certain cases, dma_alloc_coherent returns NULL. Add check for NULL pointer. Signed-off-by: Sachin Kamat Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c index 2e5f30b..dc1fc94 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c @@ -38,7 +38,7 @@ int s5p_mfc_alloc_firmware(struct s5p_mfc_dev *dev) dev->fw_virt_addr = dma_alloc_coherent(dev->mem_dev_l, dev->fw_size, &dev->bank1, GFP_KERNEL); - if (IS_ERR(dev->fw_virt_addr)) { + if (IS_ERR_OR_NULL(dev->fw_virt_addr)) { dev->fw_virt_addr = NULL; mfc_err("Allocating bitprocessor buffer failed\n"); return -ENOMEM; -- cgit v0.10.2 From e919b86c3b018c0e0c5e522354e743dcc0824ee1 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 3 Jun 2013 02:02:31 -0700 Subject: staging: alarm-dev: information leak in alarm_ioctl() Smatch complains that if we pass an invalid clock type then "ts" is never set. We need to check for errors earlier, otherwise we end up passing uninitialized stack data to userspace. Signed-off-by: Dan Carpenter Acked-by: John Stultz Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/android/alarm-dev.c b/drivers/staging/android/alarm-dev.c index ceb1c64..c8600d9 100644 --- a/drivers/staging/android/alarm-dev.c +++ b/drivers/staging/android/alarm-dev.c @@ -264,6 +264,8 @@ static long alarm_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } rv = alarm_do_ioctl(file, cmd, &ts); + if (rv) + return rv; switch (ANDROID_ALARM_BASE_CMD(cmd)) { case ANDROID_ALARM_GET_TIME(0): @@ -272,7 +274,7 @@ static long alarm_ioctl(struct file *file, unsigned int cmd, unsigned long arg) break; } - return rv; + return 0; } #ifdef CONFIG_COMPAT static long alarm_compat_ioctl(struct file *file, unsigned int cmd, -- cgit v0.10.2 From 350753bf2bd1267f471e89829d68c35b9abf4930 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 21 May 2013 12:39:31 +0200 Subject: sh-pfc: r8a7779: Don't group USB OVC and PENC pins The USB_OVCn pins are alternate options for USB over-current detection when using a 3.3V USB interface. As they're not mandatory they can be used independently of the USB PENC pins. Don't group the USB_OVCn and PENC pins to avoid conflicts when the USB_OVCn pins are used by another function. Reported-by: Sergei Shtylyov Signed-off-by: Laurent Pinchart Acked-by: Linus Walleij Signed-off-by: Simon Horman diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7779.c b/drivers/pinctrl/sh-pfc/pfc-r8a7779.c index 791a671..8cd90e7 100644 --- a/drivers/pinctrl/sh-pfc/pfc-r8a7779.c +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7779.c @@ -2357,27 +2357,48 @@ static const unsigned int sdhi3_wp_mux[] = { }; /* - USB0 ------------------------------------------------------------------- */ static const unsigned int usb0_pins[] = { - /* OVC */ - 150, 154, + /* PENC */ + 154, }; static const unsigned int usb0_mux[] = { - USB_OVC0_MARK, USB_PENC0_MARK, + USB_PENC0_MARK, +}; +static const unsigned int usb0_ovc_pins[] = { + /* USB_OVC */ + 150 +}; +static const unsigned int usb0_ovc_mux[] = { + USB_OVC0_MARK, }; /* - USB1 ------------------------------------------------------------------- */ static const unsigned int usb1_pins[] = { - /* OVC */ - 152, 155, + /* PENC */ + 155, }; static const unsigned int usb1_mux[] = { - USB_OVC1_MARK, USB_PENC1_MARK, + USB_PENC1_MARK, +}; +static const unsigned int usb1_ovc_pins[] = { + /* USB_OVC */ + 152, +}; +static const unsigned int usb1_ovc_mux[] = { + USB_OVC1_MARK, }; /* - USB2 ------------------------------------------------------------------- */ static const unsigned int usb2_pins[] = { - /* OVC, PENC */ - 125, 156, + /* PENC */ + 156, }; static const unsigned int usb2_mux[] = { - USB_OVC2_MARK, USB_PENC2_MARK, + USB_PENC2_MARK, +}; +static const unsigned int usb2_ovc_pins[] = { + /* USB_OVC */ + 125, +}; +static const unsigned int usb2_ovc_mux[] = { + USB_OVC2_MARK, }; static const struct sh_pfc_pin_group pinmux_groups[] = { @@ -2501,8 +2522,11 @@ static const struct sh_pfc_pin_group pinmux_groups[] = { SH_PFC_PIN_GROUP(sdhi3_cd), SH_PFC_PIN_GROUP(sdhi3_wp), SH_PFC_PIN_GROUP(usb0), + SH_PFC_PIN_GROUP(usb0_ovc), SH_PFC_PIN_GROUP(usb1), + SH_PFC_PIN_GROUP(usb1_ovc), SH_PFC_PIN_GROUP(usb2), + SH_PFC_PIN_GROUP(usb2_ovc), }; static const char * const du0_groups[] = { @@ -2683,14 +2707,17 @@ static const char * const sdhi3_groups[] = { static const char * const usb0_groups[] = { "usb0", + "usb0_ovc", }; static const char * const usb1_groups[] = { "usb1", + "usb1_ovc", }; static const char * const usb2_groups[] = { "usb2", + "usb2_ovc", }; static const struct sh_pfc_function pinmux_functions[] = { -- cgit v0.10.2 From 5600a8485603b240790005b9b58de4c4f6ada69d Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 22 May 2013 19:47:05 +0900 Subject: ARM: shmobile: sh73a0: Update CMT clockevent rating to 80 Update the CMT clockevent rating from 125 to 80. This resolves a boot-failure regression for kzm9g-reference in v3.10-rc1 introduced by f7db706b132f11c79ae1d74b2382e0926cf31644 ("ARM: 7674/1: smp: Avoid dummy clockevent being preferred over real"). The patch noted above reduces the rating of dummy clockevent from 400 to 100. This patch reduces the rating of CMT so that it is once again less than that of the dummy clockevent. Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index fdf3894..9696f36 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -252,7 +252,7 @@ static struct sh_timer_config cmt10_platform_data = { .name = "CMT10", .channel_offset = 0x10, .timer_bit = 0, - .clockevent_rating = 125, + .clockevent_rating = 80, .clocksource_rating = 125, }; -- cgit v0.10.2 From 466318a87f28cb3ba0d08a3b7ef1a37ae73d5aa7 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Mon, 3 Jun 2013 10:33:55 -0400 Subject: xen/smp: Fixup NOHZ per cpu data when onlining an offline CPU. The xen_play_dead is an undead function. When the vCPU is told to offline it ends up calling xen_play_dead wherin it calls the VCPUOP_down hypercall which offlines the vCPU. However, when the vCPU is onlined back, it resumes execution right after VCPUOP_down hypercall. That was OK (albeit the API for play_dead assumes that the CPU stays dead and never returns) but with commit 4b0c0f294 (tick: Cleanup NOHZ per cpu data on cpu down) that is no longer safe as said commit resets the ts->inidle which at the start of the cpu_idle loop was set. The net effect is that we get this warn: Broke affinity for irq 16 installing Xen timer for CPU 1 cpu 1 spinlock event irq 48 ------------[ cut here ]------------ WARNING: at /home/konrad/linux-linus/kernel/time/tick-sched.c:935 tick_nohz_idle_exit+0x195/0x1b0() Modules linked in: dm_multipath dm_mod xen_evtchn iscsi_boot_sysfs CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.10.0-rc3upstream-00068-gdcdbe33 #1 Hardware name: BIOSTAR Group N61PB-M2S/N61PB-M2S, BIOS 6.00 PG 09/03/2009 ffffffff8193b448 ffff880039da5e60 ffffffff816707c8 ffff880039da5ea0 ffffffff8108ce8b ffff880039da4010 ffff88003fa8e500 ffff880039da4010 0000000000000001 ffff880039da4000 ffff880039da4010 ffff880039da5eb0 Call Trace: [] dump_stack+0x19/0x1b [] warn_slowpath_common+0x6b/0xa0 [] warn_slowpath_null+0x15/0x20 [] tick_nohz_idle_exit+0x195/0x1b0 [] cpu_startup_entry+0x205/0x250 [] cpu_bringup_and_idle+0x13/0x15 ---[ end trace 915c8c486004dda1 ]--- b/c ts_inidle is set to zero. Thomas suggested that we just add a workaround to call tick_nohz_idle_enter before returning from xen_play_dead() - and that is what this patch does and fixes the issue. We also add the stable part b/c git commit 4b0c0f294 is on the stable tree. CC: stable@vger.kernel.org Suggested-by: Thomas Gleixner Signed-off-by: Konrad Rzeszutek Wilk diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index fb44426..d99cae8 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -447,6 +448,13 @@ static void __cpuinit xen_play_dead(void) /* used only with HOTPLUG_CPU */ play_dead_common(); HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL); cpu_bringup(); + /* + * commit 4b0c0f294 (tick: Cleanup NOHZ per cpu data on cpu down) + * clears certain data that the cpu_idle loop (which called us + * and that we return from) expects. The only way to get that + * data back is to call: + */ + tick_nohz_idle_enter(); } #else /* !CONFIG_HOTPLUG_CPU */ -- cgit v0.10.2 From 8eafc0a161123d90617c9ca2eddfe87b382b1b89 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 4 Jun 2013 16:02:54 +0200 Subject: ALSA: usb-audio - Apply Logitech QuickCam Pro 9000 quirk only to audio iface ... instead of applying to all interfaces. Reference: http://forums.gentoo.org/viewtopic-p-6886404.html Cc: Signed-off-by: Takashi Iwai diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 6ae71b8..8b75bcf 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -215,7 +215,13 @@ .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL }, { - USB_DEVICE(0x046d, 0x0990), + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | + USB_DEVICE_ID_MATCH_INT_CLASS | + USB_DEVICE_ID_MATCH_INT_SUBCLASS, + .idVendor = 0x046d, + .idProduct = 0x0990, + .bInterfaceClass = USB_CLASS_AUDIO, + .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL, .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { .vendor_name = "Logitech, Inc.", .product_name = "QuickCam Pro 9000", -- cgit v0.10.2 From 53d3b4d7778daf15900867336c85d3f8dd70600c Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Tue, 4 Jun 2013 17:13:21 +0200 Subject: drm/i915/sdvo: Use &intel_sdvo->ddc instead of intel_sdvo->i2c for DDC. In intel_sdvo_get_lvds_modes() the wrong i2c adapter record is used for DDC. Thus the code will always have to rely on a LVDS panel mode supplied by VBT. In most cases this succeeds, so this didn't get detected for quite a while. This regression seems to have been introduced in commit f899fc64cda8569d0529452aafc0da31c042df2e Author: Chris Wilson Date: Tue Jul 20 15:44:45 2010 -0700 drm/i915: use GMBUS to manage i2c links Signed-off-by: Egbert Eich Cc: stable@vger.kernel.org Reviewed-by: Chris Wilson [danvet: Add note about which commit likely introduced this issue.] Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index d154284..4c47b44 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1776,7 +1776,7 @@ static void intel_sdvo_get_lvds_modes(struct drm_connector *connector) * Assume that the preferred modes are * arranged in priority order. */ - intel_ddc_get_modes(connector, intel_sdvo->i2c); + intel_ddc_get_modes(connector, &intel_sdvo->ddc); if (list_empty(&connector->probed_modes) == false) goto end; -- cgit v0.10.2 From eeb065582a9618c1cf5b7154df7bae06aeb44636 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 4 Jun 2013 09:30:55 -0700 Subject: Input: synaptics - fix sync lost after resume on some laptops In summary, the symptom is intermittent key events lost after resume on some machines with synaptics touchpad (seems this is synaptics _only_), and key events loss is due to serio port reconnect after psmouse sync lost. Removing psmouse and inserting it back during the suspend/resume process is able to work around the issue, so the difference between psmouse_connect() and psmouse_reconnect() is the key to the root cause of this problem. After comparing the two different paths, synaptics driver has its own implementation of synaptics_reconnect(), and the missing psmouse_probe() seems significant, the patch below added psmouse_probe() to the reconnect process, and has been verified many times that the issue could not be reliably reproduced. There are two PS/2 commands in psmouse_probe(): 1. PSMOUSE_CMD_GETID 2. PSMOUSE_CMD_RESET_DIS Only the PSMOUSE_CMD_GETID seems to be significant. The PSMOUSE_CMD_RESET_DIS is irrelevant to this issue after trying several times. So we have only implemented this patch to issue the PSMOUSE_CMD_GETID so far. Tested-by: Daniel Manrique Signed-off-by: James M Leddy Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 2f78538..b2420ae 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -1379,6 +1379,7 @@ static int synaptics_reconnect(struct psmouse *psmouse) { struct synaptics_data *priv = psmouse->private; struct synaptics_data old_priv = *priv; + unsigned char param[2]; int retry = 0; int error; @@ -1394,6 +1395,7 @@ static int synaptics_reconnect(struct psmouse *psmouse) */ ssleep(1); } + ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETID); error = synaptics_detect(psmouse, 0); } while (error && ++retry < 3); -- cgit v0.10.2 From 3bd1f7e2db4124a2726f9afdeaaf82f09b0bd8eb Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Thu, 23 May 2013 10:22:33 -0700 Subject: Input: wacom - fix a typo for Cintiq 22HDT And make the lines easier to read. Signed-off-by: Ping Cheng Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 5c68e44..518282d 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1966,7 +1966,8 @@ static const struct wacom_features wacom_features_0xF4 = 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xF8 = { "Wacom Cintiq 24HD touch", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047, /* Pen */ - 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf6 }; + 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, + .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf6 }; static const struct wacom_features wacom_features_0xF6 = { "Wacom Cintiq 24HD touch", .type = WACOM_24HDT, /* Touch */ .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf8, .touch_max = 10 }; @@ -2009,7 +2010,8 @@ static const struct wacom_features wacom_features_0xFA = 63, WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0x5B = { "Wacom Cintiq 22HDT", WACOM_PKGLEN_INTUOS, 95840, 54260, 2047, - 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5e }; + 63, WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, + .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5e }; static const struct wacom_features wacom_features_0x5E = { "Wacom Cintiq 22HDT", .type = WACOM_24HDT, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5b, .touch_max = 10 }; @@ -2042,7 +2044,7 @@ static const struct wacom_features wacom_features_0xE5 = static const struct wacom_features wacom_features_0xE6 = { "Wacom ISDv4 E6", WACOM_PKGLEN_TPC2FG, 27760, 15694, 255, 0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES, - .touch_max = 2 }; + .touch_max = 2 }; static const struct wacom_features wacom_features_0xEC = { "Wacom ISDv4 EC", WACOM_PKGLEN_GRAPHIRE, 25710, 14500, 255, 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -- cgit v0.10.2 From d8a1d0d54d5fdac0347b75e9afd554b3dfaa465f Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 4 Jun 2013 18:50:28 +0200 Subject: USB: zte_ev: fix broken open Remove bogus port-number check in open and close, which prevented this driver from being used with a minor number different from zero. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c index b9a88f2..870e01e 100644 --- a/drivers/usb/serial/zte_ev.c +++ b/drivers/usb/serial/zte_ev.c @@ -41,9 +41,6 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, int len; unsigned char *buf; - if (port->number != 0) - return -ENODEV; - buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL); if (!buf) return -ENOMEM; @@ -166,9 +163,6 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) int len; unsigned char *buf; - if (port->number != 0) - return; - buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL); if (!buf) return; -- cgit v0.10.2 From a07088098a650267b2eda689538133a324b9523f Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 4 Jun 2013 18:50:29 +0200 Subject: USB: keyspan: fix bogus array index The outcont_endpoints array was indexed using the port minor number (which can be greater than the array size) rather than the device port number. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index eb30d7b..d85a3e0 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -1559,7 +1559,7 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, d_details = s_priv->device_details; device_port = port->number - port->serial->minor; - outcont_urb = d_details->outcont_endpoints[port->number]; + outcont_urb = d_details->outcont_endpoints[device_port]; this_urb = p_priv->outcont_urb; dev_dbg(&port->dev, "%s - endpoint %d\n", __func__, usb_pipeendpoint(this_urb->pipe)); -- cgit v0.10.2 From c1ec1bcf0c97cdd4e25f16524c962fae9a4a39f9 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 4 Jun 2013 18:50:30 +0200 Subject: USB: keyspan: remove unused endpoint-array access Remove the no longer used endpoint-array access completely. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index d85a3e0..3549d07 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -1548,7 +1548,6 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, struct keyspan_serial_private *s_priv; struct keyspan_port_private *p_priv; const struct keyspan_device_details *d_details; - int outcont_urb; struct urb *this_urb; int device_port, err; @@ -1559,7 +1558,6 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, d_details = s_priv->device_details; device_port = port->number - port->serial->minor; - outcont_urb = d_details->outcont_endpoints[device_port]; this_urb = p_priv->outcont_urb; dev_dbg(&port->dev, "%s - endpoint %d\n", __func__, usb_pipeendpoint(this_urb->pipe)); @@ -1685,14 +1683,6 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err != 0) dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); -#if 0 - else { - dev_dbg(&port->dev, "%s - usb_submit_urb(%d) OK %d bytes (end %d)\n", __func__ - outcont_urb, this_urb->transfer_buffer_length, - usb_pipeendpoint(this_urb->pipe)); - } -#endif - return 0; } -- cgit v0.10.2 From a26f009a070e840fadacb91013b2391ba7ab6cc2 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 4 Jun 2013 18:50:31 +0200 Subject: USB: mos7720: fix hardware flow control The register access to enable hardware flow control depends on the device port number and not the port minor number. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 6eac266..f27c621 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -1629,7 +1629,7 @@ static void change_port_settings(struct tty_struct *tty, mos7720_port->shadowMCR |= (UART_MCR_XONANY); /* To set hardware flow control to the specified * * serial port, in SP1/2_CONTROL_REG */ - if (port->number) + if (port_number) write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x01); else write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x02); -- cgit v0.10.2 From 702df9f1819c7fc7e257251fabc5eec674342c32 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Wed, 22 May 2013 22:41:00 +0100 Subject: iio:callback buffer: free the scan_mask MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Reported-by: Michał Mirosław Signed-off-by: Jonathan Cameron diff --git a/drivers/iio/buffer_cb.c b/drivers/iio/buffer_cb.c index 9201022..9d19ba7 100644 --- a/drivers/iio/buffer_cb.c +++ b/drivers/iio/buffer_cb.c @@ -64,7 +64,7 @@ struct iio_cb_buffer *iio_channel_get_all_cb(struct device *dev, while (chan->indio_dev) { if (chan->indio_dev != indio_dev) { ret = -EINVAL; - goto error_release_channels; + goto error_free_scan_mask; } set_bit(chan->channel->scan_index, cb_buff->buffer.scan_mask); @@ -73,6 +73,8 @@ struct iio_cb_buffer *iio_channel_get_all_cb(struct device *dev, return cb_buff; +error_free_scan_mask: + kfree(cb_buff->buffer.scan_mask); error_release_channels: iio_channel_release_all(cb_buff->channels); error_free_cb_buff: @@ -100,6 +102,7 @@ EXPORT_SYMBOL_GPL(iio_channel_stop_all_cb); void iio_channel_release_all_cb(struct iio_cb_buffer *cb_buff) { + kfree(cb_buff->buffer.scan_mask); iio_channel_release_all(cb_buff->channels); kfree(cb_buff); } -- cgit v0.10.2 From 60bba385c5e86ee6a654e3345093eb48e258eb1d Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 4 Jun 2013 16:13:25 +0300 Subject: staging: alarm-dev: information leak in alarm_compat_ioctl() If we pass an invalid clock type then "ts" is never set. We need to check for errors earlier, otherwise we end up passing uninitialized stack data to userspace. Reported-by: John Stultz Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/android/alarm-dev.c b/drivers/staging/android/alarm-dev.c index c8600d9..6dc27da 100644 --- a/drivers/staging/android/alarm-dev.c +++ b/drivers/staging/android/alarm-dev.c @@ -297,6 +297,8 @@ static long alarm_compat_ioctl(struct file *file, unsigned int cmd, } rv = alarm_do_ioctl(file, cmd, &ts); + if (rv) + return rv; switch (ANDROID_ALARM_BASE_CMD(cmd)) { case ANDROID_ALARM_GET_TIME(0): /* NOTE: we modified cmd above */ @@ -305,7 +307,7 @@ static long alarm_compat_ioctl(struct file *file, unsigned int cmd, break; } - return rv; + return 0; } #endif -- cgit v0.10.2 From e916b80d2b1988e985abc0a1c85eca5b96c61f48 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 4 Jun 2013 15:44:00 +0100 Subject: inkern: iio_device_put after incorrect return/goto The code uses return foo; goto err_type; when instead the form should have been ret = foo; goto err_type; Here this causes a useful iio_device_put to be skipped. Signed-off-by: Joe Perches Signed-off-by: Jonathan Cameron diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c index 795d100..dca4eed 100644 --- a/drivers/iio/inkern.c +++ b/drivers/iio/inkern.c @@ -124,7 +124,7 @@ static int __of_iio_channel_get(struct iio_channel *channel, channel->indio_dev = indio_dev; index = iiospec.args_count ? iiospec.args[0] : 0; if (index >= indio_dev->num_channels) { - return -EINVAL; + err = -EINVAL; goto err_put; } channel->channel = &indio_dev->channels[index]; -- cgit v0.10.2 From 68c315bb951d94210c43c52166d326f9c26f7ce8 Mon Sep 17 00:00:00 2001 From: Peter Crosthwaite Date: Tue, 4 Jun 2013 16:02:34 +0200 Subject: spi: spi-xilinx: Remove ISR race condition The ISR currently consumes the rx buffer data and re-enables transmission from within interrupt context. This is bad because if the interrupt occurs again before the ISR exits, the new interrupt will be erroneously cleared by the still completing ISR. Simplified the ISR by just setting the completion variable and exiting with no action. Then just looped the transmit functionality in xilinx_spi_txrx_bufs(). Signed-off-by: Peter Crosthwaite Signed-off-by: Michal Simek Signed-off-by: Mark Brown diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c index e1d7696..34d18dc 100644 --- a/drivers/spi/spi-xilinx.c +++ b/drivers/spi/spi-xilinx.c @@ -267,7 +267,6 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) { struct xilinx_spi *xspi = spi_master_get_devdata(spi->master); u32 ipif_ier; - u16 cr; /* We get here with transmitter inhibited */ @@ -276,7 +275,6 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) xspi->remaining_bytes = t->len; INIT_COMPLETION(xspi->done); - xilinx_spi_fill_tx_fifo(xspi); /* Enable the transmit empty interrupt, which we use to determine * progress on the transmission. @@ -285,12 +283,41 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) xspi->write_fn(ipif_ier | XSPI_INTR_TX_EMPTY, xspi->regs + XIPIF_V123B_IIER_OFFSET); - /* Start the transfer by not inhibiting the transmitter any longer */ - cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET) & - ~XSPI_CR_TRANS_INHIBIT; - xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET); + for (;;) { + u16 cr; + u8 sr; + + xilinx_spi_fill_tx_fifo(xspi); + + /* Start the transfer by not inhibiting the transmitter any + * longer + */ + cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET) & + ~XSPI_CR_TRANS_INHIBIT; + xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET); + + wait_for_completion(&xspi->done); + + /* A transmit has just completed. Process received data and + * check for more data to transmit. Always inhibit the + * transmitter while the Isr refills the transmit register/FIFO, + * or make sure it is stopped if we're done. + */ + cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET); + xspi->write_fn(cr | XSPI_CR_TRANS_INHIBIT, + xspi->regs + XSPI_CR_OFFSET); + + /* Read out all the data from the Rx FIFO */ + sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET); + while ((sr & XSPI_SR_RX_EMPTY_MASK) == 0) { + xspi->rx_fn(xspi); + sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET); + } - wait_for_completion(&xspi->done); + /* See if there is more data to send */ + if (!xspi->remaining_bytes > 0) + break; + } /* Disable the transmit empty interrupt */ xspi->write_fn(ipif_ier, xspi->regs + XIPIF_V123B_IIER_OFFSET); @@ -314,38 +341,7 @@ static irqreturn_t xilinx_spi_irq(int irq, void *dev_id) xspi->write_fn(ipif_isr, xspi->regs + XIPIF_V123B_IISR_OFFSET); if (ipif_isr & XSPI_INTR_TX_EMPTY) { /* Transmission completed */ - u16 cr; - u8 sr; - - /* A transmit has just completed. Process received data and - * check for more data to transmit. Always inhibit the - * transmitter while the Isr refills the transmit register/FIFO, - * or make sure it is stopped if we're done. - */ - cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET); - xspi->write_fn(cr | XSPI_CR_TRANS_INHIBIT, - xspi->regs + XSPI_CR_OFFSET); - - /* Read out all the data from the Rx FIFO */ - sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET); - while ((sr & XSPI_SR_RX_EMPTY_MASK) == 0) { - xspi->rx_fn(xspi); - sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET); - } - - /* See if there is more data to send */ - if (xspi->remaining_bytes > 0) { - xilinx_spi_fill_tx_fifo(xspi); - /* Start the transfer by not inhibiting the - * transmitter any longer - */ - xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET); - } else { - /* No more data to send. - * Indicate the transfer is completed. - */ - complete(&xspi->done); - } + complete(&xspi->done); } return IRQ_HANDLED; -- cgit v0.10.2 From 2eb3a81eef0510511a3211bb3da560f446a8c8de Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 3 Jun 2013 14:30:00 +0100 Subject: iio: frequency: ad4350: Fix bug / typo in mask Signed-off-by: Michael Hennerich Reviewed-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron diff --git a/drivers/iio/frequency/adf4350.c b/drivers/iio/frequency/adf4350.c index a884252..e76d4ac 100644 --- a/drivers/iio/frequency/adf4350.c +++ b/drivers/iio/frequency/adf4350.c @@ -212,7 +212,7 @@ static int adf4350_set_freq(struct adf4350_state *st, unsigned long long freq) (pdata->r2_user_settings & (ADF4350_REG2_PD_POLARITY_POS | ADF4350_REG2_LDP_6ns | ADF4350_REG2_LDF_INT_N | ADF4350_REG2_CHARGE_PUMP_CURR_uA(5000) | - ADF4350_REG2_MUXOUT(0x7) | ADF4350_REG2_NOISE_MODE(0x9))); + ADF4350_REG2_MUXOUT(0x7) | ADF4350_REG2_NOISE_MODE(0x3))); st->regs[ADF4350_REG3] = pdata->r3_user_settings & (ADF4350_REG3_12BIT_CLKDIV(0xFFF) | -- cgit v0.10.2 From 6c5d4c96f979611f0165dc825af9e1cea8dd35b9 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 3 Jun 2013 09:04:00 +0100 Subject: iio:inkern: Fix typo/bug in convert raw to processed. Signed-off-by: Michael Hennerich Signed-off-by: Jonathan Cameron diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c index dca4eed..98ddc32 100644 --- a/drivers/iio/inkern.c +++ b/drivers/iio/inkern.c @@ -450,7 +450,7 @@ static int iio_convert_raw_to_processed_unlocked(struct iio_channel *chan, s64 raw64 = raw; int ret; - ret = iio_channel_read(chan, &offset, NULL, IIO_CHAN_INFO_SCALE); + ret = iio_channel_read(chan, &offset, NULL, IIO_CHAN_INFO_OFFSET); if (ret == 0) raw64 += offset; -- cgit v0.10.2 From bc2bfffc3866e8c87dde19d5619262a810a51ed8 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 26 May 2013 17:59:20 -0700 Subject: spi: hspi: fixup long delay time Current HSPI driver is using msleep(20) on hspi_status_check_timeout(), but it was too long delay for SPI device. Bock-W board SPI access was too slow without this patch. This patch uses udelay(10) for it. Tested-by: Yusuke Goda Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown diff --git a/drivers/spi/spi-sh-hspi.c b/drivers/spi/spi-sh-hspi.c index 60cfae5..eab593e 100644 --- a/drivers/spi/spi-sh-hspi.c +++ b/drivers/spi/spi-sh-hspi.c @@ -89,7 +89,7 @@ static int hspi_status_check_timeout(struct hspi_priv *hspi, u32 mask, u32 val) if ((mask & hspi_read(hspi, SPSR)) == val) return 0; - msleep(20); + udelay(10); } dev_err(hspi->dev, "timeout\n"); -- cgit v0.10.2 From a1c6693a50391683e7f5787bb027b1aae1afbedb Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Tue, 4 Jun 2013 05:13:26 +0000 Subject: net/mlx4_en: Fix adaptive moderation cq update When turning on adaptive_rx under adaptive moderation, the CQ's moderation count wasn't updated according to rx_frames which resulted in too many interrupts and bandwidth drop. Signed-off-by: Sagi Grimberg Signed-off-by: Amir Vadai Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index b35f947..810aab0 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1323,6 +1323,7 @@ static void mlx4_en_auto_moderation(struct mlx4_en_priv *priv) priv->last_moder_time[ring] = moder_time; cq = &priv->rx_cq[ring]; cq->moder_time = moder_time; + cq->moder_cnt = priv->rx_frames; err = mlx4_en_set_cq_moder(priv, cq); if (err) en_err(priv, "Failed modifying moderation for cq:%d\n", -- cgit v0.10.2 From 5efe5355f22fb9b7bb64d19809c0a75805e0ccb8 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Tue, 4 Jun 2013 05:13:27 +0000 Subject: net/mlx4_core: Return -EPROBE_DEFER when a VF is probed before PF is sufficiently initialized In the PF initialization, SRIOV is enabled before the PF is fully initialized. This allows the kernel to probe the newly-exposed VFs before the PF is ready to handle them (nested probes). Have the probe method return the -EPROBE_DEFER value in this situation (instead of the VF probe method retrying its initialization in a loop, and returning -EIO on failure). When -EPROBE_DEFER is returned by the VF probe method, the kernel itself will retry the probe after a suitable delay. Based upon a suggestion by Ben Hutchings Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c index 1df56cc..0e572a5 100644 --- a/drivers/net/ethernet/mellanox/mlx4/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c @@ -222,8 +222,6 @@ static int mlx4_comm_cmd_poll(struct mlx4_dev *dev, u8 cmd, u16 param, * FLR process. The only non-zero result in the RESET command * is MLX4_DELAY_RESET_SLAVE*/ if ((MLX4_COMM_CMD_RESET == cmd)) { - mlx4_warn(dev, "Got slave FLRed from Communication" - " channel (ret:0x%x)\n", ret_from_pending); err = MLX4_DELAY_RESET_SLAVE; } else { mlx4_warn(dev, "Communication channel timed out\n"); diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 0d32a82..2f4a260 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -1290,7 +1290,6 @@ static int mlx4_init_slave(struct mlx4_dev *dev) { struct mlx4_priv *priv = mlx4_priv(dev); u64 dma = (u64) priv->mfunc.vhcr_dma; - int num_of_reset_retries = NUM_OF_RESET_RETRIES; int ret_from_reset = 0; u32 slave_read; u32 cmd_channel_ver; @@ -1304,18 +1303,10 @@ static int mlx4_init_slave(struct mlx4_dev *dev) * NUM_OF_RESET_RETRIES times before leaving.*/ if (ret_from_reset) { if (MLX4_DELAY_RESET_SLAVE == ret_from_reset) { - msleep(SLEEP_TIME_IN_RESET); - while (ret_from_reset && num_of_reset_retries) { - mlx4_warn(dev, "slave is currently in the" - "middle of FLR. retrying..." - "(try num:%d)\n", - (NUM_OF_RESET_RETRIES - - num_of_reset_retries + 1)); - ret_from_reset = - mlx4_comm_cmd(dev, MLX4_COMM_CMD_RESET, - 0, MLX4_COMM_TIME); - num_of_reset_retries = num_of_reset_retries - 1; - } + mlx4_warn(dev, "slave is currently in the " + "middle of FLR. Deferring probe.\n"); + mutex_unlock(&priv->cmd.slave_cmd_mutex); + return -EPROBE_DEFER; } else goto err; } @@ -1526,7 +1517,8 @@ static int mlx4_init_hca(struct mlx4_dev *dev) } else { err = mlx4_init_slave(dev); if (err) { - mlx4_err(dev, "Failed to initialize slave\n"); + if (err != -EPROBE_DEFER) + mlx4_err(dev, "Failed to initialize slave\n"); return err; } -- cgit v0.10.2 From ef96f7d46ad86625237da8a35e812bdf7896e640 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Tue, 4 Jun 2013 05:13:28 +0000 Subject: net/mlx4_en: Handle unassigned VF MAC address correctly When a VF sense they didn't get MAC address, use random one. This will address the case of administrator not assigning MAC to the VF through the PF OS APIs and keep udev happy. Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 810aab0..89c47ea 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -2119,6 +2119,7 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, struct mlx4_en_priv *priv; int i; int err; + u64 mac_u64; dev = alloc_etherdev_mqs(sizeof(struct mlx4_en_priv), MAX_TX_RINGS, MAX_RX_RINGS); @@ -2192,10 +2193,17 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, dev->addr_len = ETH_ALEN; mlx4_en_u64_to_mac(dev->dev_addr, mdev->dev->caps.def_mac[priv->port]); if (!is_valid_ether_addr(dev->dev_addr)) { - en_err(priv, "Port: %d, invalid mac burned: %pM, quiting\n", - priv->port, dev->dev_addr); - err = -EINVAL; - goto out; + if (mlx4_is_slave(priv->mdev->dev)) { + eth_hw_addr_random(dev); + en_warn(priv, "Assigned random MAC address %pM\n", dev->dev_addr); + mac_u64 = mlx4_en_mac_to_u64(dev->dev_addr); + mdev->dev->caps.def_mac[priv->port] = mac_u64; + } else { + en_err(priv, "Port: %d, invalid mac burned: %pM, quiting\n", + priv->port, dev->dev_addr); + err = -EINVAL; + goto out; + } } memcpy(priv->prev_mac, dev->dev_addr, sizeof(priv->prev_mac)); -- cgit v0.10.2 From c418253f12c0a95c7cd894953644c7488899c9fd Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Tue, 4 Jun 2013 05:13:29 +0000 Subject: net/mlx4_core: Keep VF assigned MAC in the PF admin table MAC addresses assigned by the PF to VFs were not kept in the PF driver admin table. As a result, displaying the VF MACs from the PF interface to user space showed zero address where in fact the VF got non-zero address from the PF, fix that. Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c index 58a8e53..2c97901 100644 --- a/drivers/net/ethernet/mellanox/mlx4/fw.c +++ b/drivers/net/ethernet/mellanox/mlx4/fw.c @@ -840,12 +840,16 @@ int mlx4_QUERY_PORT_wrapper(struct mlx4_dev *dev, int slave, MLX4_CMD_NATIVE); if (!err && dev->caps.function != slave) { - /* set slave default_mac address */ - MLX4_GET(def_mac, outbox->buf, QUERY_PORT_MAC_OFFSET); - def_mac += slave << 8; /* if config MAC in DB use it */ if (priv->mfunc.master.vf_oper[slave].vport[vhcr->in_modifier].state.mac) def_mac = priv->mfunc.master.vf_oper[slave].vport[vhcr->in_modifier].state.mac; + else { + /* set slave default_mac address */ + MLX4_GET(def_mac, outbox->buf, QUERY_PORT_MAC_OFFSET); + def_mac += slave << 8; + priv->mfunc.master.vf_admin[slave].vport[vhcr->in_modifier].mac = def_mac; + } + MLX4_PUT(outbox->buf, def_mac, QUERY_PORT_MAC_OFFSET); /* get port type - currently only eth is enabled */ -- cgit v0.10.2 From 534c877928a16ae5f9776436a497109639bf67dc Mon Sep 17 00:00:00 2001 From: Gao feng Date: Sun, 2 Jun 2013 22:16:21 +0000 Subject: ipv6: assign rt6_info to inet6_ifaddr in init_loopback Commit 25fb6ca4ed9cad72f14f61629b68dc03c0d9713f "net IPv6 : Fix broken IPv6 routing table after loopback down-up" forgot to assign rt6_info to the inet6_ifaddr. When disable the net device, the rt6_info which allocated in init_loopback will not be destroied in __ipv6_ifa_notify. This will trigger the waring message below [23527.916091] unregister_netdevice: waiting for tap0 to become free. Usage count = 1 Reported-by: Arkadiusz Miskiewicz Signed-off-by: Gao feng Signed-off-by: David S. Miller diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index d1b2d80..1bbf744 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -2658,8 +2658,10 @@ static void init_loopback(struct net_device *dev) sp_rt = addrconf_dst_alloc(idev, &sp_ifa->addr, 0); /* Failure cases are ignored */ - if (!IS_ERR(sp_rt)) + if (!IS_ERR(sp_rt)) { + sp_ifa->rt = sp_rt; ip6_ins_rt(sp_rt); + } } read_unlock_bh(&idev->lock); } -- cgit v0.10.2 From e768fb292d362ff2742d843e346a10853bde68be Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Sun, 2 Jun 2013 23:28:41 +0000 Subject: bnx2x: fix TCP offload for tunneling ipv4 over ipv6 FW was initialized with data from wrong header, this caused TSO packets have wrong IP csum. Signed-off-by: Dmitry Kravkov Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index be59ec4..e3fe1ce 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -3192,11 +3192,11 @@ static u32 bnx2x_xmit_type(struct bnx2x *bp, struct sk_buff *skb) rc |= XMIT_CSUM_TCP; if (skb_is_gso_v6(skb)) { - rc |= (XMIT_GSO_V6 | XMIT_CSUM_TCP | XMIT_CSUM_V6); + rc |= (XMIT_GSO_V6 | XMIT_CSUM_TCP); if (rc & XMIT_CSUM_ENC) rc |= XMIT_GSO_ENC_V6; } else if (skb_is_gso(skb)) { - rc |= (XMIT_GSO_V4 | XMIT_CSUM_V4 | XMIT_CSUM_TCP); + rc |= (XMIT_GSO_V4 | XMIT_CSUM_TCP); if (rc & XMIT_CSUM_ENC) rc |= XMIT_GSO_ENC_V4; } @@ -3483,19 +3483,18 @@ static void bnx2x_update_pbds_gso_enc(struct sk_buff *skb, { u16 hlen_w = 0; u8 outerip_off, outerip_len = 0; + /* from outer IP to transport */ hlen_w = (skb_inner_transport_header(skb) - skb_network_header(skb)) >> 1; /* transport len */ - if (xmit_type & XMIT_CSUM_TCP) - hlen_w += inner_tcp_hdrlen(skb) >> 1; - else - hlen_w += sizeof(struct udphdr) >> 1; + hlen_w += inner_tcp_hdrlen(skb) >> 1; pbd2->fw_ip_hdr_to_payload_w = hlen_w; - if (xmit_type & XMIT_CSUM_ENC_V4) { + /* outer IP header info */ + if (xmit_type & XMIT_CSUM_V4) { struct iphdr *iph = ip_hdr(skb); pbd2->fw_ip_csum_wo_len_flags_frag = bswab16(csum_fold((~iph->check) - -- cgit v0.10.2 From ff5b2fabf53426c15a5f041505687f94d1b2109f Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 3 Jun 2013 00:38:39 +0000 Subject: net: fec: add fallback to random MAC address If no valid MAC address could be obtained from the hardware, fall back to a randomly generated one. Signed-off-by: Pavel Machek Signed-off-by: Lucas Stach Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 85a0603..a667015 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -1038,6 +1038,18 @@ static void fec_get_mac(struct net_device *ndev) iap = &tmpaddr[0]; } + /* + * 5) random mac address + */ + if (!is_valid_ether_addr(iap)) { + /* Report it and use a random ethernet address instead */ + netdev_err(ndev, "Invalid MAC address: %pM\n", iap); + eth_hw_addr_random(ndev); + netdev_info(ndev, "Using random MAC address: %pM\n", + ndev->dev_addr); + return; + } + memcpy(ndev->dev_addr, iap, ETH_ALEN); /* Adjust MAC if using macaddr */ -- cgit v0.10.2 From 5b61ff43a774b9843402fb280fec6d700e1fe583 Mon Sep 17 00:00:00 2001 From: Roi Dayan Date: Wed, 8 May 2013 12:21:17 +0000 Subject: IB/iser: Fix device removal flow Change the code to destroy the "last opened" rdma_cm id after making sure we released all other objects (QP, CQs, PD, etc) associated with the IB device. Since iser accesses the IB device using the rdma_cm id, we need to free any objects that are related to the device that is associated with the rdma_cm id prior to destroying that id. When this isn't done, the low level driver that created this device can be unloaded before iser has a chance to free all the objects and a such a call may invoke code segment which isn't valid any more and crash. Cc: Sean Hefty Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/ulp/iser/iser_verbs.c b/drivers/infiniband/ulp/iser/iser_verbs.c index 5278916..f13cc22 100644 --- a/drivers/infiniband/ulp/iser/iser_verbs.c +++ b/drivers/infiniband/ulp/iser/iser_verbs.c @@ -292,10 +292,10 @@ out_err: } /** - * releases the FMR pool, QP and CMA ID objects, returns 0 on success, + * releases the FMR pool and QP objects, returns 0 on success, * -1 on failure */ -static int iser_free_ib_conn_res(struct iser_conn *ib_conn, int can_destroy_id) +static int iser_free_ib_conn_res(struct iser_conn *ib_conn) { int cq_index; BUG_ON(ib_conn == NULL); @@ -314,13 +314,9 @@ static int iser_free_ib_conn_res(struct iser_conn *ib_conn, int can_destroy_id) rdma_destroy_qp(ib_conn->cma_id); } - /* if cma handler context, the caller acts s.t the cma destroy the id */ - if (ib_conn->cma_id != NULL && can_destroy_id) - rdma_destroy_id(ib_conn->cma_id); ib_conn->fmr_pool = NULL; ib_conn->qp = NULL; - ib_conn->cma_id = NULL; kfree(ib_conn->page_vec); if (ib_conn->login_buf) { @@ -415,11 +411,16 @@ static void iser_conn_release(struct iser_conn *ib_conn, int can_destroy_id) list_del(&ib_conn->conn_list); mutex_unlock(&ig.connlist_mutex); iser_free_rx_descriptors(ib_conn); - iser_free_ib_conn_res(ib_conn, can_destroy_id); + iser_free_ib_conn_res(ib_conn); ib_conn->device = NULL; /* on EVENT_ADDR_ERROR there's no device yet for this conn */ if (device != NULL) iser_device_try_release(device); + /* if cma handler context, the caller actually destroy the id */ + if (ib_conn->cma_id != NULL && can_destroy_id) { + rdma_destroy_id(ib_conn->cma_id); + ib_conn->cma_id = NULL; + } iscsi_destroy_endpoint(ib_conn->ep); } -- cgit v0.10.2 From 28f292e879a6acf745005e75196fe8f7cc504103 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Wed, 8 May 2013 12:21:18 +0000 Subject: IB/iser: Add Mellanox copyright Add Mellanox copyright to the iser initiator source code which I maintain. Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c index f19b099..2e84ef8 100644 --- a/drivers/infiniband/ulp/iser/iscsi_iser.c +++ b/drivers/infiniband/ulp/iser/iscsi_iser.c @@ -5,6 +5,7 @@ * Copyright (C) 2004 Alex Aizman * Copyright (C) 2005 Mike Christie * Copyright (c) 2005, 2006 Voltaire, Inc. All rights reserved. + * Copyright (c) 2013 Mellanox Technologies. All rights reserved. * maintained by openib-general@openib.org * * This software is available to you under a choice of one of two diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.h b/drivers/infiniband/ulp/iser/iscsi_iser.h index 06f578c..4f069c0 100644 --- a/drivers/infiniband/ulp/iser/iscsi_iser.h +++ b/drivers/infiniband/ulp/iser/iscsi_iser.h @@ -8,6 +8,7 @@ * * Copyright (c) 2004, 2005, 2006 Voltaire, Inc. All rights reserved. * Copyright (c) 2005, 2006 Cisco Systems. All rights reserved. + * Copyright (c) 2013 Mellanox Technologies. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/ulp/iser/iser_initiator.c b/drivers/infiniband/ulp/iser/iser_initiator.c index a00ccd1..b6d81a8 100644 --- a/drivers/infiniband/ulp/iser/iser_initiator.c +++ b/drivers/infiniband/ulp/iser/iser_initiator.c @@ -1,5 +1,6 @@ /* * Copyright (c) 2004, 2005, 2006 Voltaire, Inc. All rights reserved. + * Copyright (c) 2013 Mellanox Technologies. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/ulp/iser/iser_memory.c b/drivers/infiniband/ulp/iser/iser_memory.c index 68ebb7f..7827baf 100644 --- a/drivers/infiniband/ulp/iser/iser_memory.c +++ b/drivers/infiniband/ulp/iser/iser_memory.c @@ -1,5 +1,6 @@ /* * Copyright (c) 2004, 2005, 2006 Voltaire, Inc. All rights reserved. + * Copyright (c) 2013 Mellanox Technologies. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/ulp/iser/iser_verbs.c b/drivers/infiniband/ulp/iser/iser_verbs.c index f13cc22..2c4941d 100644 --- a/drivers/infiniband/ulp/iser/iser_verbs.c +++ b/drivers/infiniband/ulp/iser/iser_verbs.c @@ -1,6 +1,7 @@ /* * Copyright (c) 2004, 2005, 2006 Voltaire, Inc. All rights reserved. * Copyright (c) 2005, 2006 Cisco Systems. All rights reserved. + * Copyright (c) 2013 Mellanox Technologies. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU -- cgit v0.10.2 From 1e65eb425b660ccd7c8d3ffb353512352690c67f Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Wed, 8 May 2013 12:21:19 +0000 Subject: MAINTAINERS: Add entry for iSCSI Extensions for RDMA (iSER) initiator Add entry for the iSER initiator driver and which is maintained by Or Gerlitz and Roi Dayan below the kernel InfiniBand subsystem. Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier diff --git a/MAINTAINERS b/MAINTAINERS index f35a259..8e0a847 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4448,6 +4448,16 @@ S: Maintained F: drivers/scsi/*iscsi* F: include/scsi/*iscsi* +ISCSI EXTENSIONS FOR RDMA (ISER) INITIATOR +M: Or Gerlitz +M: Roi Dayan +L: linux-rdma@vger.kernel.org +S: Supported +W: http://www.openfabrics.org +W: www.open-iscsi.org +Q: http://patchwork.kernel.org/project/linux-rdma/list/ +F: drivers/infiniband/ulp/iser + ISDN SUBSYSTEM M: Karsten Keil L: isdn4linux@listserv.isdn4linux.de (subscribers-only) -- cgit v0.10.2 From f3bdf34465307fc3f6967a9202a921e11505b2e6 Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Fri, 17 May 2013 12:40:32 +0000 Subject: IB/qib: Fix lockdep splat in qib_alloc_lkey() The following backtrace is reported with CONFIG_PROVE_RCU: drivers/infiniband/hw/qib/qib_keys.c:64 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 1 4 locks held by kworker/0:1/56: #0: (events){.+.+.+}, at: [] process_one_work+0x165/0x4a0 #1: ((&wfc.work)){+.+.+.}, at: [] process_one_work+0x165/0x4a0 #2: (device_mutex){+.+.+.}, at: [] ib_register_device+0x38/0x220 [ib_core] #3: (&(&dev->lk_table.lock)->rlock){......}, at: [] qib_alloc_lkey+0x3c/0x1b0 [ib_qib] stack backtrace: Pid: 56, comm: kworker/0:1 Not tainted 3.10.0-rc1+ #6 Call Trace: [] lockdep_rcu_suspicious+0xe5/0x130 [] qib_alloc_lkey+0x101/0x1b0 [ib_qib] [] qib_get_dma_mr+0xa6/0xd0 [ib_qib] [] ib_get_dma_mr+0x1a/0x50 [ib_core] [] ib_mad_port_open+0x12c/0x390 [ib_mad] [] ? trace_hardirqs_on_caller+0x105/0x190 [] ib_mad_init_device+0x52/0x110 [ib_mad] [] ? sl2vl_attr_show+0x30/0x30 [ib_qib] [] ib_register_device+0x1a9/0x220 [ib_core] [] qib_register_ib_device+0x735/0xa40 [ib_qib] [] ? mod_timer+0x118/0x220 [] qib_init_one+0x1e5/0x400 [ib_qib] [] local_pci_probe+0x4e/0x90 [] work_for_cpu_fn+0x18/0x30 [] process_one_work+0x1d6/0x4a0 [] ? process_one_work+0x165/0x4a0 [] worker_thread+0x119/0x370 [] ? manage_workers+0x180/0x180 [] kthread+0xee/0x100 [] ? __init_kthread_worker+0x70/0x70 [] ret_from_fork+0x7c/0xb0 [] ? __init_kthread_worker+0x70/0x70 Per Documentation/RCU/lockdep-splat.txt, the code now uses rcu_access_pointer() vs. rcu_dereference(). Reported-by: Jay Fenlason Reviewed-by: Dean Luick Signed-off-by: Mike Marciniszyn Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/qib/qib_keys.c b/drivers/infiniband/hw/qib/qib_keys.c index 81c7b73..3b9afcc 100644 --- a/drivers/infiniband/hw/qib/qib_keys.c +++ b/drivers/infiniband/hw/qib/qib_keys.c @@ -61,7 +61,7 @@ int qib_alloc_lkey(struct qib_mregion *mr, int dma_region) if (dma_region) { struct qib_mregion *tmr; - tmr = rcu_dereference(dev->dma_mr); + tmr = rcu_access_pointer(dev->dma_mr); if (!tmr) { qib_get_mr(mr); rcu_assign_pointer(dev->dma_mr, mr); -- cgit v0.10.2 From 44dbc78ee43d5df0bbcd7f3ae6a0ba00ed261e95 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Mon, 3 Jun 2013 02:59:57 +0000 Subject: bnx2x: Fix bridged GSO for 57710/57711 chips It was recently found out that GSO on 57710/57711 was broken, due to packets being sent without a valid IP checksum. Commit 057cf65 "bnx2x: Fix GSO for 57710/57711 chips" partially fixed this issue, but failed to set the correct IP checksum when receiving GSO packets via bridges, as such packets enter bnx2x_tx_split() and the FW flags needed to calculate IP checksum were erroneously set in the incorrect buffer descriptor. This patch re-enables GSO in said scenario for 57710/57711 chips. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index e3fe1ce..638e554 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -3817,8 +3817,7 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) bnx2x_set_pbd_gso_e2(skb, &pbd_e2_parsing_data, xmit_type); else - bnx2x_set_pbd_gso(skb, pbd_e1x, tx_start_bd, - xmit_type); + bnx2x_set_pbd_gso(skb, pbd_e1x, first_bd, xmit_type); } /* Set the PBD's parsing_data field if not zero -- cgit v0.10.2 From 3a5395b3d57b9e3836c755434c88f4590d5ea6f6 Mon Sep 17 00:00:00 2001 From: "Jens Renner \\(EFE\\)" Date: Mon, 3 Jun 2013 04:32:52 +0000 Subject: net: ethernet: xilinx_emaclite: set protocol selector bits when writing ANAR This patch sets the protocol selector bits (4:0) of the PHY's MII_ADVERTISE register (ANAR) when writing ADVERTISE_ALL. The protocol selector bits are indicating IEEE 803.3u support and are fixed / read-only on some PHYs. Not setting them correctly on others (like TI DP83630) makes the PHY fall back to 10M HDX mode which should be avoided. Tested for TI DP83630 PHY on Microblaze platform. Signed-off-by: Jens Renner Tested-by: Michal Simek Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c index 919b983..b7268b3 100644 --- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c +++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c @@ -946,7 +946,8 @@ static int xemaclite_open(struct net_device *dev) phy_write(lp->phy_dev, MII_CTRL1000, 0); /* Advertise only 10 and 100mbps full/half duplex speeds */ - phy_write(lp->phy_dev, MII_ADVERTISE, ADVERTISE_ALL); + phy_write(lp->phy_dev, MII_ADVERTISE, ADVERTISE_ALL | + ADVERTISE_CSMA); /* Restart auto negotiation */ bmcr = phy_read(lp->phy_dev, MII_BMCR); -- cgit v0.10.2 From 9bc297ea0622bb2a6b3abfa2fa84f0a3b86ef8c8 Mon Sep 17 00:00:00 2001 From: Nithin Sujir Date: Mon, 3 Jun 2013 09:19:34 +0000 Subject: tg3: Add read dma workaround for 5720 Commit 091f0ea30074bc43f9250961b3247af713024bc6 "tg3: Add New 5719 Read DMA workaround" added a workaround for TX DMA stall on the 5719. This workaround needs to be applied to the 5720 as well. Cc: stable@vger.kernel.org Reported-by: Roland Dreier Tested-by: Roland Dreier Signed-off-by: Nithin Nayak Sujir Signed-off-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 1f2dd92..0f493c8 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -9468,6 +9468,14 @@ static void tg3_rss_write_indir_tbl(struct tg3 *tp) } } +static inline u32 tg3_lso_rd_dma_workaround_bit(struct tg3 *tp) +{ + if (tg3_asic_rev(tp) == ASIC_REV_5719) + return TG3_LSO_RD_DMA_TX_LENGTH_WA_5719; + else + return TG3_LSO_RD_DMA_TX_LENGTH_WA_5720; +} + /* tp->lock is held. */ static int tg3_reset_hw(struct tg3 *tp, bool reset_phy) { @@ -10153,16 +10161,17 @@ static int tg3_reset_hw(struct tg3 *tp, bool reset_phy) tw32_f(RDMAC_MODE, rdmac_mode); udelay(40); - if (tg3_asic_rev(tp) == ASIC_REV_5719) { + if (tg3_asic_rev(tp) == ASIC_REV_5719 || + tg3_asic_rev(tp) == ASIC_REV_5720) { for (i = 0; i < TG3_NUM_RDMA_CHANNELS; i++) { if (tr32(TG3_RDMA_LENGTH + (i << 2)) > TG3_MAX_MTU(tp)) break; } if (i < TG3_NUM_RDMA_CHANNELS) { val = tr32(TG3_LSO_RD_DMA_CRPTEN_CTRL); - val |= TG3_LSO_RD_DMA_TX_LENGTH_WA; + val |= tg3_lso_rd_dma_workaround_bit(tp); tw32(TG3_LSO_RD_DMA_CRPTEN_CTRL, val); - tg3_flag_set(tp, 5719_RDMA_BUG); + tg3_flag_set(tp, 5719_5720_RDMA_BUG); } } @@ -10526,15 +10535,15 @@ static void tg3_periodic_fetch_stats(struct tg3 *tp) TG3_STAT_ADD32(&sp->tx_ucast_packets, MAC_TX_STATS_UCAST); TG3_STAT_ADD32(&sp->tx_mcast_packets, MAC_TX_STATS_MCAST); TG3_STAT_ADD32(&sp->tx_bcast_packets, MAC_TX_STATS_BCAST); - if (unlikely(tg3_flag(tp, 5719_RDMA_BUG) && + if (unlikely(tg3_flag(tp, 5719_5720_RDMA_BUG) && (sp->tx_ucast_packets.low + sp->tx_mcast_packets.low + sp->tx_bcast_packets.low) > TG3_NUM_RDMA_CHANNELS)) { u32 val; val = tr32(TG3_LSO_RD_DMA_CRPTEN_CTRL); - val &= ~TG3_LSO_RD_DMA_TX_LENGTH_WA; + val &= ~tg3_lso_rd_dma_workaround_bit(tp); tw32(TG3_LSO_RD_DMA_CRPTEN_CTRL, val); - tg3_flag_clear(tp, 5719_RDMA_BUG); + tg3_flag_clear(tp, 5719_5720_RDMA_BUG); } TG3_STAT_ADD32(&sp->rx_octets, MAC_RX_STATS_OCTETS); diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h index 9b2d3ac..ff6e30e 100644 --- a/drivers/net/ethernet/broadcom/tg3.h +++ b/drivers/net/ethernet/broadcom/tg3.h @@ -1422,7 +1422,8 @@ #define TG3_LSO_RD_DMA_CRPTEN_CTRL 0x00004910 #define TG3_LSO_RD_DMA_CRPTEN_CTRL_BLEN_BD_4K 0x00030000 #define TG3_LSO_RD_DMA_CRPTEN_CTRL_BLEN_LSO_4K 0x000c0000 -#define TG3_LSO_RD_DMA_TX_LENGTH_WA 0x02000000 +#define TG3_LSO_RD_DMA_TX_LENGTH_WA_5719 0x02000000 +#define TG3_LSO_RD_DMA_TX_LENGTH_WA_5720 0x00200000 /* 0x4914 --> 0x4be0 unused */ #define TG3_NUM_RDMA_CHANNELS 4 @@ -3059,7 +3060,7 @@ enum TG3_FLAGS { TG3_FLAG_APE_HAS_NCSI, TG3_FLAG_TX_TSTAMP_EN, TG3_FLAG_4K_FIFO_LIMIT, - TG3_FLAG_5719_RDMA_BUG, + TG3_FLAG_5719_5720_RDMA_BUG, TG3_FLAG_RESET_TASK_PENDING, TG3_FLAG_PTP_CAPABLE, TG3_FLAG_5705_PLUS, -- cgit v0.10.2 From 5e71d9d77c07fa7d4c42287a177f7b738d0cd4b9 Mon Sep 17 00:00:00 2001 From: Pablo Neira Date: Mon, 3 Jun 2013 09:28:43 +0000 Subject: net: fix sk_buff head without data area Eric Dumazet spotted that we have to check skb->head instead of skb->data as skb->head points to the beginning of the data area of the skbuff. Similarly, we have to initialize the skb->head pointer, not skb->data in __alloc_skb_head. After this fix, netlink crashes in the release path of the sk_buff, so let's fix that as well. This bug was introduced in (0ebd0ac net: add function to allocate sk_buff head without data area). Reported-by: Eric Dumazet Signed-off-by: Pablo Neira Ayuso Signed-off-by: David S. Miller diff --git a/net/core/skbuff.c b/net/core/skbuff.c index af9185d..cfd777b 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -195,7 +195,7 @@ struct sk_buff *__alloc_skb_head(gfp_t gfp_mask, int node) * the tail pointer in struct sk_buff! */ memset(skb, 0, offsetof(struct sk_buff, tail)); - skb->data = NULL; + skb->head = NULL; skb->truesize = sizeof(struct sk_buff); atomic_set(&skb->users, 1); @@ -611,7 +611,7 @@ static void skb_release_head_state(struct sk_buff *skb) static void skb_release_all(struct sk_buff *skb) { skb_release_head_state(skb); - if (likely(skb->data)) + if (likely(skb->head)) skb_release_data(skb); } diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index 12ac6b4..d0b3dd6 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -747,7 +747,7 @@ static void netlink_skb_destructor(struct sk_buff *skb) atomic_dec(&ring->pending); sock_put(sk); - skb->data = NULL; + skb->head = NULL; } #endif if (skb->sk != NULL) -- cgit v0.10.2 From 5343a7f8be11951cb3095b91e8e4eb506cfacc0f Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 4 Jun 2013 07:11:48 +0000 Subject: net_sched: htb: do not mix 1ns and 64ns time units commit 56b765b79 ("htb: improved accuracy at high rates") added another regression for low rates, because it mixes 1ns and 64ns time units. So the maximum delay (mbuffer) was not 60 second, but 937 ms. Lets convert all time fields to 1ns as 64bit arches are becoming the norm. Reported-by: Jesper Dangaard Brouer Signed-off-by: Eric Dumazet Tested-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index f87fb85..adaedd7 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -109,7 +109,7 @@ struct htb_class { } un; struct rb_node node[TC_HTB_NUMPRIO]; /* node for self or feed tree */ struct rb_node pq_node; /* node for event queue */ - psched_time_t pq_key; + s64 pq_key; int prio_activity; /* for which prios are we active */ enum htb_cmode cmode; /* current mode of the class */ @@ -121,10 +121,10 @@ struct htb_class { /* token bucket parameters */ struct psched_ratecfg rate; struct psched_ratecfg ceil; - s64 buffer, cbuffer; /* token bucket depth/rate */ - psched_tdiff_t mbuffer; /* max wait time */ - s64 tokens, ctokens; /* current number of tokens */ - psched_time_t t_c; /* checkpoint time */ + s64 buffer, cbuffer; /* token bucket depth/rate */ + s64 mbuffer; /* max wait time */ + s64 tokens, ctokens; /* current number of tokens */ + s64 t_c; /* checkpoint time */ }; struct htb_sched { @@ -141,15 +141,15 @@ struct htb_sched { struct rb_root wait_pq[TC_HTB_MAXDEPTH]; /* time of nearest event per level (row) */ - psched_time_t near_ev_cache[TC_HTB_MAXDEPTH]; + s64 near_ev_cache[TC_HTB_MAXDEPTH]; int defcls; /* class where unclassified flows go to */ /* filters for qdisc itself */ struct tcf_proto *filter_list; - int rate2quantum; /* quant = rate / rate2quantum */ - psched_time_t now; /* cached dequeue time */ + int rate2quantum; /* quant = rate / rate2quantum */ + s64 now; /* cached dequeue time */ struct qdisc_watchdog watchdog; /* non shaped skbs; let them go directly thru */ @@ -664,8 +664,8 @@ static void htb_charge_class(struct htb_sched *q, struct htb_class *cl, * next pending event (0 for no event in pq, q->now for too many events). * Note: Applied are events whose have cl->pq_key <= q->now. */ -static psched_time_t htb_do_events(struct htb_sched *q, int level, - unsigned long start) +static s64 htb_do_events(struct htb_sched *q, int level, + unsigned long start) { /* don't run for longer than 2 jiffies; 2 is used instead of * 1 to simplify things when jiffy is going to be incremented @@ -857,7 +857,7 @@ static struct sk_buff *htb_dequeue(struct Qdisc *sch) struct sk_buff *skb; struct htb_sched *q = qdisc_priv(sch); int level; - psched_time_t next_event; + s64 next_event; unsigned long start_at; /* try to dequeue direct packets as high prio (!) to minimize cpu work */ @@ -880,7 +880,7 @@ ok: for (level = 0; level < TC_HTB_MAXDEPTH; level++) { /* common case optimization - skip event handler quickly */ int m; - psched_time_t event; + s64 event; if (q->now >= q->near_ev_cache[level]) { event = htb_do_events(q, level, start_at); @@ -1117,8 +1117,8 @@ htb_dump_class_stats(struct Qdisc *sch, unsigned long arg, struct gnet_dump *d) if (!cl->level && cl->un.leaf.q) cl->qstats.qlen = cl->un.leaf.q->q.qlen; - cl->xstats.tokens = cl->tokens; - cl->xstats.ctokens = cl->ctokens; + cl->xstats.tokens = PSCHED_NS2TICKS(cl->tokens); + cl->xstats.ctokens = PSCHED_NS2TICKS(cl->ctokens); if (gnet_stats_copy_basic(d, &cl->bstats) < 0 || gnet_stats_copy_rate_est(d, NULL, &cl->rate_est) < 0 || @@ -1200,7 +1200,7 @@ static void htb_parent_to_leaf(struct htb_sched *q, struct htb_class *cl, parent->un.leaf.q = new_q ? new_q : &noop_qdisc; parent->tokens = parent->buffer; parent->ctokens = parent->cbuffer; - parent->t_c = psched_get_time(); + parent->t_c = ktime_to_ns(ktime_get()); parent->cmode = HTB_CAN_SEND; } @@ -1417,8 +1417,8 @@ static int htb_change_class(struct Qdisc *sch, u32 classid, /* set class to be in HTB_CAN_SEND state */ cl->tokens = PSCHED_TICKS2NS(hopt->buffer); cl->ctokens = PSCHED_TICKS2NS(hopt->cbuffer); - cl->mbuffer = 60 * PSCHED_TICKS_PER_SEC; /* 1min */ - cl->t_c = psched_get_time(); + cl->mbuffer = 60ULL * NSEC_PER_SEC; /* 1min */ + cl->t_c = ktime_to_ns(ktime_get()); cl->cmode = HTB_CAN_SEND; /* attach to the hash list and parent's family */ -- cgit v0.10.2 From beba44b17d572ebb4909c1327360918ee4d89e43 Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Mon, 20 May 2013 19:14:00 +0200 Subject: drm/nv84/disp: Fix HDMI audio regression Code refactoring in commit 8e9e3d2deacc460fbb8a4691140318f6e85e6891 (drm/nv84/disp: move hdmi control into core) disabled HDMI audio on my nv84 by removing too much old code without adding it in the new one. This patch adds the missing code within the new code layout resulting in HDMI audio working again. It should work on any HDMI head, but due to lacking ahrdware I could only test the (1st) one. It also might be possible that similar code is needed for nva3, which I can't test. Signed-off-by: Alexander Stein Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/engine/disp/hdminv84.c b/drivers/gpu/drm/nouveau/core/engine/disp/hdminv84.c index 0d36bdc..7fdade6 100644 --- a/drivers/gpu/drm/nouveau/core/engine/disp/hdminv84.c +++ b/drivers/gpu/drm/nouveau/core/engine/disp/hdminv84.c @@ -55,6 +55,10 @@ nv84_hdmi_ctrl(struct nv50_disp_priv *priv, int head, int or, u32 data) nv_wr32(priv, 0x616510 + hoff, 0x00000000); nv_mask(priv, 0x616500 + hoff, 0x00000001, 0x00000001); + nv_mask(priv, 0x6165d0 + hoff, 0x00070001, 0x00010001); /* SPARE, HW_CTS */ + nv_mask(priv, 0x616568 + hoff, 0x00010101, 0x00000000); /* ACR_CTRL, ?? */ + nv_mask(priv, 0x616578 + hoff, 0x80000000, 0x80000000); /* ACR_0441_ENABLE */ + /* ??? */ nv_mask(priv, 0x61733c, 0x00100000, 0x00100000); /* RESETF */ nv_mask(priv, 0x61733c, 0x10000000, 0x10000000); /* LOOKUP_EN */ -- cgit v0.10.2 From 89e033a4bc688bc6631c6de8b66d7f26f8e0652b Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 3 Jun 2013 15:43:30 +1000 Subject: drm/nv50-nv84/fifo: fix resume regression introduced by playlist race fix Reported-by: Maarten Maathuis Reported-by: Sven Joachim Reported-by: Konrad Rzeszutek Wilk Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c b/drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c index 89bf459..e9b8217 100644 --- a/drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c +++ b/drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c @@ -40,14 +40,13 @@ * FIFO channel objects ******************************************************************************/ -void -nv50_fifo_playlist_update(struct nv50_fifo_priv *priv) +static void +nv50_fifo_playlist_update_locked(struct nv50_fifo_priv *priv) { struct nouveau_bar *bar = nouveau_bar(priv); struct nouveau_gpuobj *cur; int i, p; - mutex_lock(&nv_subdev(priv)->mutex); cur = priv->playlist[priv->cur_playlist]; priv->cur_playlist = !priv->cur_playlist; @@ -61,6 +60,13 @@ nv50_fifo_playlist_update(struct nv50_fifo_priv *priv) nv_wr32(priv, 0x0032f4, cur->addr >> 12); nv_wr32(priv, 0x0032ec, p); nv_wr32(priv, 0x002500, 0x00000101); +} + +void +nv50_fifo_playlist_update(struct nv50_fifo_priv *priv) +{ + mutex_lock(&nv_subdev(priv)->mutex); + nv50_fifo_playlist_update_locked(priv); mutex_unlock(&nv_subdev(priv)->mutex); } @@ -489,7 +495,7 @@ nv50_fifo_init(struct nouveau_object *object) for (i = 0; i < 128; i++) nv_wr32(priv, 0x002600 + (i * 4), 0x00000000); - nv50_fifo_playlist_update(priv); + nv50_fifo_playlist_update_locked(priv); nv_wr32(priv, 0x003200, 0x00000001); nv_wr32(priv, 0x003250, 0x00000001); -- cgit v0.10.2 From ea9197cc323839ef3d5280c0453b2c622caa6bc7 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 3 Jun 2013 16:07:06 +1000 Subject: drm/nv50/disp: force dac power state during load detect MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit fdo#64904 Reported-by: Gerhard Bräunlich Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/engine/disp/dacnv50.c b/drivers/gpu/drm/nouveau/core/engine/disp/dacnv50.c index d0817d9..a60a5ac 100644 --- a/drivers/gpu/drm/nouveau/core/engine/disp/dacnv50.c +++ b/drivers/gpu/drm/nouveau/core/engine/disp/dacnv50.c @@ -50,11 +50,15 @@ nv50_dac_sense(struct nv50_disp_priv *priv, int or, u32 loadval) { const u32 doff = (or * 0x800); int load = -EINVAL; + nv_mask(priv, 0x61a004 + doff, 0x807f0000, 0x80150000); + nv_wait(priv, 0x61a004 + doff, 0x80000000, 0x00000000); nv_wr32(priv, 0x61a00c + doff, 0x00100000 | loadval); udelay(9500); nv_wr32(priv, 0x61a00c + doff, 0x80000000); load = (nv_rd32(priv, 0x61a00c + doff) & 0x38000000) >> 27; nv_wr32(priv, 0x61a00c + doff, 0x00000000); + nv_mask(priv, 0x61a004 + doff, 0x807f0000, 0x80550000); + nv_wait(priv, 0x61a004 + doff, 0x80000000, 0x00000000); return load; } diff --git a/drivers/gpu/drm/nouveau/core/include/core/class.h b/drivers/gpu/drm/nouveau/core/include/core/class.h index 0a393f7..5a5961b 100644 --- a/drivers/gpu/drm/nouveau/core/include/core/class.h +++ b/drivers/gpu/drm/nouveau/core/include/core/class.h @@ -218,7 +218,7 @@ struct nv04_display_class { #define NV50_DISP_DAC_PWR_STATE 0x00000040 #define NV50_DISP_DAC_PWR_STATE_ON 0x00000000 #define NV50_DISP_DAC_PWR_STATE_OFF 0x00000040 -#define NV50_DISP_DAC_LOAD 0x0002000c +#define NV50_DISP_DAC_LOAD 0x00020100 #define NV50_DISP_DAC_LOAD_VALUE 0x00000007 #define NV50_DISP_PIOR_MTHD 0x00030000 -- cgit v0.10.2 From d40ee48acde16894fb3b241d7e896d5fa84e0f10 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 3 Jun 2013 16:40:14 +1000 Subject: drm/nv50/kms: use dac loadval from vbios, where it's available Regression from merging the old nv50/nvd9 code together, and may be needed to fully fix fdo#64904. The value is ignored completely by the hardware starting from nva3. Reported-by: Emil Velikov Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c index 3258873..e843cf8 100644 --- a/drivers/gpu/drm/nouveau/nv50_display.c +++ b/drivers/gpu/drm/nouveau/nv50_display.c @@ -1554,7 +1554,9 @@ nv50_dac_detect(struct drm_encoder *encoder, struct drm_connector *connector) { struct nv50_disp *disp = nv50_disp(encoder->dev); int ret, or = nouveau_encoder(encoder)->or; - u32 load = 0; + u32 load = nouveau_drm(encoder->dev)->vbios.dactestval; + if (load == 0) + load = 340; ret = nv_exec(disp->core, NV50_DISP_DAC_LOAD + or, &load, sizeof(load)); if (ret || load != 7) -- cgit v0.10.2 From 11e7064f35bb87da8f427d1aa4bbd8b7473a3993 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 5 Jun 2013 08:35:26 +0200 Subject: ALSA: usb-audio - Fix invalid volume resolution on Logitech HD webcam c270 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit USB audio driver spews an error message when probing Logitech HD webcam c270: ALSA mixer.c:1300 usb_audio: Warning! Unlikely big volume range (=6144), cval->res is probably wrong. ALSA mixer.c:1304 usb_audio: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7680/1 Obviously the device needs a fixed volume resolution (cval->res = 384) like other Logitech devices. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=821735 Reported-and-tested-by: Cristian Rodríguez Cc: Signed-off-by: Takashi Iwai diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index ca4739c..e5c7f9f 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -886,6 +886,7 @@ static void volume_control_quirks(struct usb_mixer_elem_info *cval, case USB_ID(0x046d, 0x0808): case USB_ID(0x046d, 0x0809): case USB_ID(0x046d, 0x081d): /* HD Webcam c510 */ + case USB_ID(0x046d, 0x0825): /* HD Webcam c270 */ case USB_ID(0x046d, 0x0991): /* Most audio usb devices lie about volume resolution. * Most Logitech webcams have res = 384. -- cgit v0.10.2 From bc5abcf7e411b889f73ea2a90439071a0f451011 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Tue, 4 Jun 2013 10:24:56 -0700 Subject: eCryptfs: Check return of filemap_write_and_wait during fsync Error out of ecryptfs_fsync() if filemap_write_and_wait() fails. Signed-off-by: Tyler Hicks Cc: Paul Taysom Cc: Olof Johansson Cc: stable@vger.kernel.org # v3.6+ diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c index 16f509d..a7abbea 100644 --- a/fs/ecryptfs/file.c +++ b/fs/ecryptfs/file.c @@ -295,7 +295,12 @@ static int ecryptfs_release(struct inode *inode, struct file *file) static int ecryptfs_fsync(struct file *file, loff_t start, loff_t end, int datasync) { - filemap_write_and_wait(file->f_mapping); + int rc; + + rc = filemap_write_and_wait(file->f_mapping); + if (rc) + return rc; + return vfs_fsync(ecryptfs_file_to_lower(file), datasync); } -- cgit v0.10.2 From 3ef91f21a66826cf1003bb7b3c51ac2de4c28182 Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Sun, 2 Jun 2013 19:51:47 +0300 Subject: crypto: twofish - disable AVX2 implementation It appears that the performance of 'vpgatherdd' is suboptimal for this kind of workload (tested on Core i5-4570) and causes twofish_avx2 to be significantly slower than twofish_avx. So disable the AVX2 implementation to avoid performance regressions. Signed-off-by: Jussi Kivilinna Signed-off-by: Herbert Xu diff --git a/crypto/Kconfig b/crypto/Kconfig index 622d8a4..27720af 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -1299,6 +1299,7 @@ config CRYPTO_TWOFISH_AVX_X86_64 config CRYPTO_TWOFISH_AVX2_X86_64 tristate "Twofish cipher algorithm (x86_64/AVX2)" depends on X86 && 64BIT + depends on BROKEN select CRYPTO_ALGAPI select CRYPTO_CRYPTD select CRYPTO_ABLK_HELPER_X86 -- cgit v0.10.2 From edb7c7cdba90c3fb2339e51c15d21982bdf72fdc Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Sun, 2 Jun 2013 19:51:52 +0300 Subject: crypto: blowfish - disable AVX2 implementation It appears that the performance of 'vpgatherdd' is suboptimal for this kind of workload (tested on Core i5-4570) and causes blowfish-avx2 to be significantly slower than blowfish-amd64. So disable the AVX2 implementation to avoid performance regressions. Signed-off-by: Jussi Kivilinna Signed-off-by: Herbert Xu diff --git a/crypto/Kconfig b/crypto/Kconfig index 27720af..bf8148e 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -823,6 +823,7 @@ config CRYPTO_BLOWFISH_X86_64 config CRYPTO_BLOWFISH_AVX2_X86_64 tristate "Blowfish cipher algorithm (x86_64/AVX2)" depends on X86 && 64BIT + depends on BROKEN select CRYPTO_ALGAPI select CRYPTO_CRYPTD select CRYPTO_ABLK_HELPER_X86 -- cgit v0.10.2 From 68be0b1ae355c6deb11326df6758f80154f44cf0 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 3 Jun 2013 23:57:37 +0200 Subject: crypto: sahara - fix building as module The sahara crypto driver has an incorrect MODULE_DEVICE_TABLE, which prevents us from actually building this driver as a loadable module. sahara_dt_ids is a of_device_id array, so we have to use MODULE_DEVICE_TABLE(of, ...). Signed-off-by: Arnd Bergmann Cc: Javier Martin Cc: Herbert Xu Signed-off-by: Herbert Xu diff --git a/drivers/crypto/sahara.c b/drivers/crypto/sahara.c index a97bb6c..c3dc1c0 100644 --- a/drivers/crypto/sahara.c +++ b/drivers/crypto/sahara.c @@ -863,7 +863,7 @@ static struct of_device_id sahara_dt_ids[] = { { .compatible = "fsl,imx27-sahara" }, { /* sentinel */ } }; -MODULE_DEVICE_TABLE(platform, sahara_dt_ids); +MODULE_DEVICE_TABLE(of, sahara_dt_ids); static int sahara_probe(struct platform_device *pdev) { -- cgit v0.10.2 From 066a1a5fca0e188c41636d0874ab7495f24f595b Mon Sep 17 00:00:00 2001 From: James Hogan Date: Wed, 22 May 2013 12:29:22 +0100 Subject: KVM: add kvm_para_available to asm-generic/kvm_para.h According to include/uapi/linux/kvm_para.h architectures should define kvm_para_available, so add an implementation to asm-generic/kvm_para.h which just returns false. This fixes intel8x0.c build failure on mips with KVM enabled. Signed-off-by: James Hogan Cc: Marcelo Tosatti Cc: Gleb Natapov Cc: Arnd Bergmann Signed-off-by: Gleb Natapov diff --git a/include/asm-generic/kvm_para.h b/include/asm-generic/kvm_para.h index 9d96605..fa25bec 100644 --- a/include/asm-generic/kvm_para.h +++ b/include/asm-generic/kvm_para.h @@ -18,4 +18,9 @@ static inline unsigned int kvm_arch_para_features(void) return 0; } +static inline bool kvm_para_available(void) +{ + return false; +} + #endif -- cgit v0.10.2 From 991a6b735ff47710769545b11e481bb140b2e6f7 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Sat, 1 Jun 2013 15:31:40 +0200 Subject: netfilter: nfnetlink_acct: fix incomplete dumping of objects Fix broken incomplete object dumping if the list of objects does not fit into one single netlink message. Reported-by: Gabriel Lazar Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/nfnetlink_acct.c b/net/netfilter/nfnetlink_acct.c index dc3fd5d..c7b6d46 100644 --- a/net/netfilter/nfnetlink_acct.c +++ b/net/netfilter/nfnetlink_acct.c @@ -149,9 +149,12 @@ nfnl_acct_dump(struct sk_buff *skb, struct netlink_callback *cb) rcu_read_lock(); list_for_each_entry_rcu(cur, &nfnl_acct_list, head) { - if (last && cur != last) - continue; + if (last) { + if (cur != last) + continue; + last = NULL; + } if (nfnl_acct_fill_info(skb, NETLINK_CB(cb->skb).portid, cb->nlh->nlmsg_seq, NFNL_MSG_TYPE(cb->nlh->nlmsg_type), -- cgit v0.10.2 From 37bc4f8dfa72fb43b84381abca39cfdbbc8ff2df Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Sat, 1 Jun 2013 15:36:02 +0200 Subject: netfilter: nfnetlink_cttimeout: fix incomplete dumping of objects Fix broken incomplete object dumping if the list of objects does not fit into one single netlink message. Reported-by: Gabriel Lazar Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/nfnetlink_cttimeout.c b/net/netfilter/nfnetlink_cttimeout.c index 701c88a..65074df 100644 --- a/net/netfilter/nfnetlink_cttimeout.c +++ b/net/netfilter/nfnetlink_cttimeout.c @@ -220,9 +220,12 @@ ctnl_timeout_dump(struct sk_buff *skb, struct netlink_callback *cb) rcu_read_lock(); list_for_each_entry_rcu(cur, &cttimeout_list, head) { - if (last && cur != last) - continue; + if (last) { + if (cur != last) + continue; + last = NULL; + } if (ctnl_timeout_fill_info(skb, NETLINK_CB(cb->skb).portid, cb->nlh->nlmsg_seq, NFNL_MSG_TYPE(cb->nlh->nlmsg_type), -- cgit v0.10.2 From 8673b83bf2f013379453b4779047bf3c6ae387e4 Mon Sep 17 00:00:00 2001 From: Ross Lagerwall Date: Fri, 31 May 2013 20:45:17 +0100 Subject: acpi-cpufreq: set current frequency based on target P-State Commit 4b31e774 (Always set P-state on initialization) fixed bug #4634 and caused the driver to always set the target P-State at least once since the initial P-State may not be the desired one. Commit 5a1c0228 (cpufreq: Avoid calling cpufreq driver's target() routine if target_freq == policy->cur) caused a regression in this behavior. This fixes the regression by setting policy->cur based on the CPU's target frequency rather than the CPU's current reported frequency (which may be different). This means that the P-State will be set initially if the CPU's target frequency is different from the governor's target frequency. This fixes an issue where setting the default governor to performance wouldn't correctly enable turbo mode on all cores. Signed-off-by: Ross Lagerwall Reviewed-by: Len Brown Acked-by: Viresh Kumar Cc: 3.8+ Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c index 11b8b4b..edc089e 100644 --- a/drivers/cpufreq/acpi-cpufreq.c +++ b/drivers/cpufreq/acpi-cpufreq.c @@ -347,11 +347,11 @@ static u32 get_cur_val(const struct cpumask *mask) switch (per_cpu(acfreq_data, cpumask_first(mask))->cpu_feature) { case SYSTEM_INTEL_MSR_CAPABLE: cmd.type = SYSTEM_INTEL_MSR_CAPABLE; - cmd.addr.msr.reg = MSR_IA32_PERF_STATUS; + cmd.addr.msr.reg = MSR_IA32_PERF_CTL; break; case SYSTEM_AMD_MSR_CAPABLE: cmd.type = SYSTEM_AMD_MSR_CAPABLE; - cmd.addr.msr.reg = MSR_AMD_PERF_STATUS; + cmd.addr.msr.reg = MSR_AMD_PERF_CTL; break; case SYSTEM_IO_CAPABLE: cmd.type = SYSTEM_IO_CAPABLE; -- cgit v0.10.2 From a98d4f64a20b2b88697e7e08c871144a7e3f0ec4 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 3 Jun 2013 02:08:39 +0000 Subject: ACPI / APEI: fix error return code in ghes_probe() Fix to return a negative error code in the acpi_gsi_to_irq() and request_irq() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Reviewed-by: Huang Ying Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c index d668a8a..ea750ed 100644 --- a/drivers/acpi/apei/ghes.c +++ b/drivers/acpi/apei/ghes.c @@ -917,13 +917,14 @@ static int ghes_probe(struct platform_device *ghes_dev) break; case ACPI_HEST_NOTIFY_EXTERNAL: /* External interrupt vector is GSI */ - if (acpi_gsi_to_irq(generic->notify.vector, &ghes->irq)) { + rc = acpi_gsi_to_irq(generic->notify.vector, &ghes->irq); + if (rc) { pr_err(GHES_PFX "Failed to map GSI to IRQ for generic hardware error source: %d\n", generic->header.source_id); goto err_edac_unreg; } - if (request_irq(ghes->irq, ghes_irq_func, - 0, "GHES IRQ", ghes)) { + rc = request_irq(ghes->irq, ghes_irq_func, 0, "GHES IRQ", ghes); + if (rc) { pr_err(GHES_PFX "Failed to register IRQ for generic hardware error source: %d\n", generic->header.source_id); goto err_edac_unreg; -- cgit v0.10.2 From 9f29ab11ddbfc12db54df5a66dab22b39ad94e8e Mon Sep 17 00:00:00 2001 From: Aaron Lu Date: Tue, 4 Jun 2013 23:02:58 +0200 Subject: ACPI / scan: do not match drivers against objects having scan handlers With the introduction of ACPI scan handlers, an ACPI device object with an ACPI scan handler attached to it must not be bound to an ACPI driver any more. Therefore it doesn't make sense to match those ACPI device objects against a newly registered ACPI driver in acpi_bus_match(), so make that function return 0 if the device object passed to it has an ACPI scan handler attached. This also addresses a regression related to a broken ACPI table in the BIOS, where it has defined a _ROM method under the PCI root bridge object. This causes the video module to treat that object as a display controller device (since only display devices are supposed to have a _ROM method defined according to the ACPI spec). As a result, the ACPI video driver binds to the PCI root bridge object and overwrites the previously assigned driver_data field of it, causing subsequent calls to acpi_get_pci_dev() to fail. [rjw: Subject and changelog] References: https://bugzilla.kernel.org/show_bug.cgi?id=58091 Reported-by: Jason Cassell Reported-and-bisected-by: Dmitry S. Demin Cc: 3.9+ Signed-off-by: Aaron Lu Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 44225cb..90c5759 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -740,6 +740,10 @@ static int acpi_bus_match(struct device *dev, struct device_driver *drv) struct acpi_device *acpi_dev = to_acpi_device(dev); struct acpi_driver *acpi_drv = to_acpi_driver(drv); + /* Skip ACPI device objects with scan handlers attached. */ + if (acpi_dev->handler) + return 0; + return acpi_dev->flags.match_driver && !acpi_match_device_ids(acpi_dev, acpi_drv->ids); } -- cgit v0.10.2 From 2f7021a815f20f3481c10884fe9735ce2a56db35 Mon Sep 17 00:00:00 2001 From: Michael Wang Date: Wed, 5 Jun 2013 08:49:37 +0000 Subject: cpufreq: protect 'policy->cpus' from offlining during __gov_queue_work() Jiri Kosina and Borislav Petkov reported the warning: [ 51.616759] ------------[ cut here ]------------ [ 51.621460] WARNING: at arch/x86/kernel/smp.c:123 native_smp_send_reschedule+0x58/0x60() [ 51.629638] Modules linked in: ext2 vfat fat loop snd_hda_codec_hdmi usbhid snd_hda_codec_realtek coretemp kvm_intel kvm snd_hda_intel snd_hda_codec crc32_pclmul crc32c_intel ghash_clmulni_intel snd_hwdep snd_pcm aesni_intel sb_edac aes_x86_64 ehci_pci snd_page_alloc glue_helper snd_timer xhci_hcd snd iTCO_wdt iTCO_vendor_support ehci_hcd edac_core lpc_ich acpi_cpufreq lrw gf128mul ablk_helper cryptd mperf usbcore usb_common soundcore mfd_core dcdbas evdev pcspkr processor i2c_i801 button microcode [ 51.675581] CPU: 0 PID: 244 Comm: kworker/1:1 Tainted: G W 3.10.0-rc1+ #10 [ 51.683407] Hardware name: Dell Inc. Precision T3600/0PTTT9, BIOS A08 01/24/2013 [ 51.690901] Workqueue: events od_dbs_timer [ 51.695069] 0000000000000009 ffff88043a2f5b68 ffffffff8161441c ffff88043a2f5ba8 [ 51.702602] ffffffff8103e540 0000000000000033 0000000000000001 ffff88043d5f8000 [ 51.710136] 00000000ffff0ce1 0000000000000001 ffff88044fc4fc08 ffff88043a2f5bb8 [ 51.717691] Call Trace: [ 51.720191] [] dump_stack+0x19/0x1b [ 51.725396] [] warn_slowpath_common+0x70/0xa0 [ 51.731473] [] warn_slowpath_null+0x1a/0x20 [ 51.737378] [] native_smp_send_reschedule+0x58/0x60 [ 51.744013] [] wake_up_nohz_cpu+0x2d/0xa0 [ 51.749745] [] add_timer_on+0x8f/0x110 [ 51.755214] [] __queue_delayed_work+0x16e/0x1a0 [ 51.761470] [] ? try_to_grab_pending+0xd1/0x1a0 [ 51.767724] [] mod_delayed_work_on+0x5a/0xa0 [ 51.773719] [] gov_queue_work+0x4d/0xc0 [ 51.779271] [] od_dbs_timer+0xcb/0x170 [ 51.784734] [] process_one_work+0x1fd/0x540 [ 51.790634] [] ? process_one_work+0x192/0x540 [ 51.796711] [] worker_thread+0x122/0x380 [ 51.802350] [] ? rescuer_thread+0x320/0x320 [ 51.808264] [] kthread+0xea/0xf0 [ 51.813200] [] ? flush_kthread_worker+0x150/0x150 [ 51.819644] [] ret_from_fork+0x7c/0xb0 [ 51.918165] nouveau E[ DRM] GPU lockup - switching to software fbcon [ 51.930505] [] ? flush_kthread_worker+0x150/0x150 [ 51.936994] ---[ end trace f419538ada83b5c5 ]--- It was caused by the policy->cpus changed during the process of __gov_queue_work(), in other word, cpu offline happened. Use get/put_online_cpus() to prevent the offline from happening while __gov_queue_work() is running. [rjw: The problem has been present since recent commit 031299b (cpufreq: governors: Avoid unnecessary per cpu timer interrupts)] References: https://lkml.org/lkml/2013/6/5/88 Reported-by: Borislav Petkov Reported-and-tested-by: Jiri Kosina Signed-off-by: Michael Wang Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c index 5af40ad..dc9b72e 100644 --- a/drivers/cpufreq/cpufreq_governor.c +++ b/drivers/cpufreq/cpufreq_governor.c @@ -26,6 +26,7 @@ #include #include #include +#include #include "cpufreq_governor.h" @@ -180,8 +181,10 @@ void gov_queue_work(struct dbs_data *dbs_data, struct cpufreq_policy *policy, if (!all_cpus) { __gov_queue_work(smp_processor_id(), dbs_data, delay); } else { + get_online_cpus(); for_each_cpu(i, policy->cpus) __gov_queue_work(i, dbs_data, delay); + put_online_cpus(); } } EXPORT_SYMBOL_GPL(gov_queue_work); -- cgit v0.10.2 From 0ca684365547cd5f214b5739568dae3df5d6cec9 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 25 Feb 2013 18:22:37 +0100 Subject: cpufreq: cpufreq-cpu0: use the exact frequency for clk_set_rate() clk_set_rate() isn't supposed to accept approximate frequencies, instead a supported frequency should be obtained from clk_round_rate() and then used to set the clock. Signed-off-by: Guennadi Liakhovetski Acked-by: Shawn Guo Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c index a64eb8b..ad1fde2 100644 --- a/drivers/cpufreq/cpufreq-cpu0.c +++ b/drivers/cpufreq/cpufreq-cpu0.c @@ -45,7 +45,7 @@ static int cpu0_set_target(struct cpufreq_policy *policy, struct cpufreq_freqs freqs; struct opp *opp; unsigned long volt = 0, volt_old = 0, tol = 0; - long freq_Hz; + long freq_Hz, freq_exact; unsigned int index; int ret; @@ -60,6 +60,7 @@ static int cpu0_set_target(struct cpufreq_policy *policy, freq_Hz = clk_round_rate(cpu_clk, freq_table[index].frequency * 1000); if (freq_Hz < 0) freq_Hz = freq_table[index].frequency * 1000; + freq_exact = freq_Hz; freqs.new = freq_Hz / 1000; freqs.old = clk_get_rate(cpu_clk) / 1000; @@ -98,7 +99,7 @@ static int cpu0_set_target(struct cpufreq_policy *policy, } } - ret = clk_set_rate(cpu_clk, freqs.new * 1000); + ret = clk_set_rate(cpu_clk, freq_exact); if (ret) { pr_err("failed to set clock rate: %d\n", ret); if (cpu_reg) -- cgit v0.10.2 From 409b545ac10d9548929557a75ad86540f59a2c83 Mon Sep 17 00:00:00 2001 From: Phil Oester Date: Tue, 4 Jun 2013 05:09:27 +0000 Subject: netfilter: xt_TCPMSS: Fix violation of RFC879 in absence of MSS option The clamp-mss-to-pmtu option of the xt_TCPMSS target can cause issues connecting to websites if there was no MSS option present in the original SYN packet from the client. In these cases, it may add a MSS higher than the default specified in RFC879. Fix this by never setting a value > 536 if no MSS option was specified by the client. This closes netfilter's bugzilla #662. Signed-off-by: Phil Oester Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/xt_TCPMSS.c b/net/netfilter/xt_TCPMSS.c index a75240f..afaebc7 100644 --- a/net/netfilter/xt_TCPMSS.c +++ b/net/netfilter/xt_TCPMSS.c @@ -125,6 +125,12 @@ tcpmss_mangle_packet(struct sk_buff *skb, skb_put(skb, TCPOLEN_MSS); + /* RFC 879 states that the default MSS is 536 without specific + * knowledge that the destination host is prepared to accept larger. + * Since no MSS was provided, we MUST NOT set a value > 536. + */ + newmss = min(newmss, (u16)536); + opt = (u_int8_t *)tcph + sizeof(struct tcphdr); memmove(opt + TCPOLEN_MSS, opt, tcplen - sizeof(struct tcphdr)); -- cgit v0.10.2 From ee4b7c7fe0c50b97d074f9185dba9558d9440c21 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Wed, 5 Jun 2013 14:51:30 +0100 Subject: ASoC: arizona: Correct AEC loopback enable Signed-off-by: Charles Keepax Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/wm5102.c b/sound/soc/codecs/wm5102.c index e895d39..100fdad 100644 --- a/sound/soc/codecs/wm5102.c +++ b/sound/soc/codecs/wm5102.c @@ -1120,7 +1120,8 @@ SND_SOC_DAPM_AIF_IN("AIF3RX2", NULL, 0, ARIZONA_DSP_WIDGETS(DSP1, "DSP1"), SND_SOC_DAPM_VALUE_MUX("AEC Loopback", ARIZONA_DAC_AEC_CONTROL_1, - ARIZONA_AEC_LOOPBACK_ENA, 0, &wm5102_aec_loopback_mux), + ARIZONA_AEC_LOOPBACK_ENA_SHIFT, 0, + &wm5102_aec_loopback_mux), SND_SOC_DAPM_PGA_E("OUT1L", SND_SOC_NOPM, ARIZONA_OUT1L_ENA_SHIFT, 0, NULL, 0, arizona_hp_ev, diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c index ba38f06..88ad7db 100644 --- a/sound/soc/codecs/wm5110.c +++ b/sound/soc/codecs/wm5110.c @@ -503,7 +503,8 @@ SND_SOC_DAPM_PGA("ASRC2R", ARIZONA_ASRC_ENABLE, ARIZONA_ASRC2R_ENA_SHIFT, 0, NULL, 0), SND_SOC_DAPM_VALUE_MUX("AEC Loopback", ARIZONA_DAC_AEC_CONTROL_1, - ARIZONA_AEC_LOOPBACK_ENA, 0, &wm5110_aec_loopback_mux), + ARIZONA_AEC_LOOPBACK_ENA_SHIFT, 0, + &wm5110_aec_loopback_mux), SND_SOC_DAPM_AIF_OUT("AIF1TX1", NULL, 0, ARIZONA_AIF1_TX_ENABLES, ARIZONA_AIF1TX1_ENA_SHIFT, 0), -- cgit v0.10.2 From 9a6aa279d3d17af73a029fa40654e92f4e75e8bb Mon Sep 17 00:00:00 2001 From: Alexey Kardashevskiy Date: Wed, 5 Jun 2013 08:54:16 -0600 Subject: vfio: fix crash on rmmod devtmpfs_delete_node() calls devnode() callback with mode==NULL but vfio still tries to write there. The patch fixes this. Signed-off-by: Alexey Kardashevskiy Signed-off-by: Alex Williamson diff --git a/drivers/vfio/vfio.c b/drivers/vfio/vfio.c index acb7121..6d78736 100644 --- a/drivers/vfio/vfio.c +++ b/drivers/vfio/vfio.c @@ -1360,7 +1360,7 @@ static const struct file_operations vfio_device_fops = { */ static char *vfio_devnode(struct device *dev, umode_t *mode) { - if (MINOR(dev->devt) == 0) + if (mode && (MINOR(dev->devt) == 0)) *mode = S_IRUGO | S_IWUGO; return kasprintf(GFP_KERNEL, "vfio/%s", dev_name(dev)); -- cgit v0.10.2 From f4488035abdac56682153aa0cff3d1dce84e1c54 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 5 Jun 2013 12:21:11 +0200 Subject: USB: serial: fix TIOCMIWAIT return value Fix regression introduced by commit 143d9d9616 ("USB: serial: add tiocmiwait subdriver operation") which made the ioctl operation return ENODEV rather than ENOIOCTLCMD when a subdriver TIOCMIWAIT implementation is missing. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 4753c00..5f6b1ff 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -408,7 +408,7 @@ static int serial_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; - int retval = -ENODEV; + int retval = -ENOIOCTLCMD; dev_dbg(tty->dev, "%s - cmd 0x%.4x\n", __func__, cmd); @@ -420,8 +420,6 @@ static int serial_ioctl(struct tty_struct *tty, default: if (port->serial->type->ioctl) retval = port->serial->type->ioctl(tty, cmd, arg); - else - retval = -ENOIOCTLCMD; } return retval; -- cgit v0.10.2 From 338679f7ba4a81906b3fdfa6507824fdf704be80 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Tue, 4 Jun 2013 09:53:59 +0200 Subject: s390/pgtable: Fix guest overindication for change bit When doing the transition invalid->valid in the host page table for a guest, then the guest view of C/R is in the pgste. After validation the view is pgste OR real key. We must zero out the real key C/R to avoid guest over-indication for change (and reference). Touching the real key is ok also for the host: The change bit is tracked via write protection and the reference bit is also ok because set_pte_at was called and the page will be touched anyway soon. Furthermore architecture defines reference as "substantially accurate", over- and underindication are ok. Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index ac01463..391e592 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -704,17 +704,19 @@ static inline void pgste_set_key(pte_t *ptep, pgste_t pgste, pte_t entry) { #ifdef CONFIG_PGSTE unsigned long address; - unsigned long okey, nkey; + unsigned long nkey; if (pte_val(entry) & _PAGE_INVALID) return; + VM_BUG_ON(!(pte_val(*ptep) & _PAGE_INVALID)); address = pte_val(entry) & PAGE_MASK; - okey = nkey = page_get_storage_key(address); - nkey &= ~(_PAGE_ACC_BITS | _PAGE_FP_BIT); - /* Set page access key and fetch protection bit from pgste */ - nkey |= (pgste_val(pgste) & (RCP_ACC_BITS | RCP_FP_BIT)) >> 56; - if (okey != nkey) - page_set_storage_key(address, nkey, 0); + /* + * Set page access key and fetch protection bit from pgste. + * The guest C/R information is still in the PGSTE, set real + * key C/R to 0. + */ + nkey = (pgste_val(pgste) & (RCP_ACC_BITS | RCP_FP_BIT)) >> 56; + page_set_storage_key(address, nkey, 0); #endif } -- cgit v0.10.2 From 9cc5c206d9b44b7763aab3082a5be72c78a3ef7a Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Tue, 4 Jun 2013 11:00:08 +0200 Subject: s390/dumpstack: fix address ranges for asynchronous and panic stack git commit dc7ee00d4771b321 "s390: lowcore stack pointer offsets" introduced a regression in regard to show_stack(). The stack pointer for the asynchronous and the panic stack in the lowcore now have an additional offset applied to them. This offset needs to be taken into account in the calculation for the low and high address for the stacks. Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/dumpstack.c b/arch/s390/kernel/dumpstack.c index 2982974..87acc38 100644 --- a/arch/s390/kernel/dumpstack.c +++ b/arch/s390/kernel/dumpstack.c @@ -74,6 +74,8 @@ __show_trace(unsigned long sp, unsigned long low, unsigned long high) static void show_trace(struct task_struct *task, unsigned long *stack) { + const unsigned long frame_size = + STACK_FRAME_OVERHEAD + sizeof(struct pt_regs); register unsigned long __r15 asm ("15"); unsigned long sp; @@ -82,11 +84,13 @@ static void show_trace(struct task_struct *task, unsigned long *stack) sp = task ? task->thread.ksp : __r15; printk("Call Trace:\n"); #ifdef CONFIG_CHECK_STACK - sp = __show_trace(sp, S390_lowcore.panic_stack - 4096, - S390_lowcore.panic_stack); + sp = __show_trace(sp, + S390_lowcore.panic_stack + frame_size - 4096, + S390_lowcore.panic_stack + frame_size); #endif - sp = __show_trace(sp, S390_lowcore.async_stack - ASYNC_SIZE, - S390_lowcore.async_stack); + sp = __show_trace(sp, + S390_lowcore.async_stack + frame_size - ASYNC_SIZE, + S390_lowcore.async_stack + frame_size); if (task) __show_trace(sp, (unsigned long) task_stack_page(task), (unsigned long) task_stack_page(task) + THREAD_SIZE); -- cgit v0.10.2 From 3a82603be4f5523ce21dd468a323aa36ff845f6d Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Wed, 5 Jun 2013 09:22:33 +0200 Subject: s390/pgtable: Save pgste during modify_prot_start/commit In modify_prot_start we update the pgste value but never store it back into the original location. Lets save the calculated result, since modify_prot_commit will use the value of the pgste. Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index 391e592..f9a0a70 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -640,6 +640,13 @@ static inline void pgste_set_unlock(pte_t *ptep, pgste_t pgste) #endif } +static inline void pgste_set(pte_t *ptep, pgste_t pgste) +{ +#ifdef CONFIG_PGSTE + *(pgste_t *)(ptep + PTRS_PER_PTE) = pgste; +#endif +} + static inline pgste_t pgste_update_all(pte_t *ptep, pgste_t pgste) { #ifdef CONFIG_PGSTE @@ -1101,8 +1108,10 @@ static inline pte_t ptep_modify_prot_start(struct mm_struct *mm, if (!mm_exclusive(mm)) __ptep_ipte(address, ptep); - if (mm_has_pgste(mm)) + if (mm_has_pgste(mm)) { pgste = pgste_update_all(&pte, pgste); + pgste_set(ptep, pgste); + } return pte; } -- cgit v0.10.2 From a8f6e7f7953d1baa05a346bf7cee44f1d022c63d Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Wed, 5 Jun 2013 09:25:34 +0200 Subject: s390/pgtable: make pgste lock an explicit barrier Getting and Releasing the pgste lock has lock semantics. Make the code an explicit barrier. Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index f9a0a70..e8b6e5b 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -623,7 +623,7 @@ static inline pgste_t pgste_get_lock(pte_t *ptep) " csg %0,%1,%2\n" " jl 0b\n" : "=&d" (old), "=&d" (new), "=Q" (ptep[PTRS_PER_PTE]) - : "Q" (ptep[PTRS_PER_PTE]) : "cc"); + : "Q" (ptep[PTRS_PER_PTE]) : "cc", "memory"); #endif return __pgste(new); } @@ -635,7 +635,8 @@ static inline void pgste_set_unlock(pte_t *ptep, pgste_t pgste) " nihh %1,0xff7f\n" /* clear RCP_PCL_BIT */ " stg %1,%0\n" : "=Q" (ptep[PTRS_PER_PTE]) - : "d" (pgste_val(pgste)), "Q" (ptep[PTRS_PER_PTE]) : "cc"); + : "d" (pgste_val(pgste)), "Q" (ptep[PTRS_PER_PTE]) + : "cc", "memory"); preempt_enable(); #endif } -- cgit v0.10.2 From 98f6d1a6681b9398968f9fe5e016d19c259b04c2 Mon Sep 17 00:00:00 2001 From: Peter Oberparleiter Date: Wed, 5 Jun 2013 15:51:57 +0200 Subject: s390/sclp: fix new line detection When printing multi-line text using sclp_print, line endings are not correctly handled. The routine is expecting an EBCDIC new line character as line terminator while the input text is encoded in ASCII format. Fix this problem by modifying sclp_print to scan for ASCII new line characters. Signed-off-by: Peter Oberparleiter Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/sclp.S b/arch/s390/kernel/sclp.S index b6506ee..29bd7be 100644 --- a/arch/s390/kernel/sclp.S +++ b/arch/s390/kernel/sclp.S @@ -225,7 +225,7 @@ _sclp_print: ahi %r2,1 ltr %r0,%r0 # end of string? jz .LfinalizemtoS4 - chi %r0,0x15 # end of line (NL)? + chi %r0,0x0a # end of line (NL)? jz .LfinalizemtoS4 stc %r0,0(%r6,%r7) # copy to mto la %r11,0(%r6,%r7) -- cgit v0.10.2 From 65694c5aaddfedd9da082e4e150cafc6b3fc8a6a Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Wed, 5 Jun 2013 15:15:41 +0100 Subject: x86/PCI: Map PCI setup data with ioremap() so it can be in highmem f9a37be0f0 ("x86: Use PCI setup data") added support for using PCI ROM images from setup_data. This used phys_to_virt(), which is not valid for highmem addresses, and can cause a crash when booting a 32-bit kernel via the EFI boot stub. pcibios_add_device() assumes that the physical addresses stored in setup_data are accessible via the direct kernel mapping, and that calling phys_to_virt() is valid. This isn't guaranteed to be true on x86 where the direct mapping range is much smaller than on x86-64. Calling phys_to_virt() on a highmem address results in the following: BUG: unable to handle kernel paging request at 39a3c198 IP: [] pcibios_add_device+0x2f/0x90 ... Call Trace: [] pci_device_add+0xe3/0x130 [] pci_scan_single_device+0x8b/0xb0 [] pci_scan_slot+0x48/0x100 [] pci_scan_child_bus+0x24/0xc0 [] pci_acpi_scan_root+0x2c0/0x490 [] acpi_pci_root_add+0x312/0x42f ... The solution is to use ioremap() instead of phys_to_virt() to map the setup data into the kernel address space. [bhelgaas: changelog] Tested-by: Jani Nikula Signed-off-by: Matt Fleming Signed-off-by: Bjorn Helgaas Cc: Matthew Garrett Cc: Seth Forshee Cc: Jesse Barnes Cc: stable@vger.kernel.org # v3.8+ diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 305c68b..981c2db 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -628,7 +628,9 @@ int pcibios_add_device(struct pci_dev *dev) pa_data = boot_params.hdr.setup_data; while (pa_data) { - data = phys_to_virt(pa_data); + data = ioremap(pa_data, sizeof(*rom)); + if (!data) + return -ENOMEM; if (data->type == SETUP_PCI) { rom = (struct pci_setup_rom *)data; @@ -645,6 +647,7 @@ int pcibios_add_device(struct pci_dev *dev) } } pa_data = data->next; + iounmap(data); } return 0; } -- cgit v0.10.2 From 275236797916924103e133e3d7a7ea777c951273 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Wed, 29 May 2013 16:57:30 +0100 Subject: ARM: 7737/1: fix kernel decompressor compilation error with CONFIG_DEBUG_SEMIHOSTING Selecting this option produces: AS arch/arm/boot/compressed/debug.o arch/arm/boot/compressed/debug.S:4:33: fatal error: mach/debug-macro.S: No such file or directory compilation terminated. make[3]: *** [arch/arm/boot/compressed/debug.o] Error 1 The semihosting support cannot be modelled into a senduart macro as it requires memory space for argument passing. So the CONFIG_DEBUG_LL_INCLUDE may not have any sensible value and the include directive should be omitted. While at it, let's add proper semihosting output support to the decompressor. Signed-off-by: Nicolas Pitre Acked-by: Shawn Guo Signed-off-by: Russell King diff --git a/arch/arm/boot/compressed/debug.S b/arch/arm/boot/compressed/debug.S index 6e8382d..5392ee6 100644 --- a/arch/arm/boot/compressed/debug.S +++ b/arch/arm/boot/compressed/debug.S @@ -1,6 +1,8 @@ #include #include +#ifndef CONFIG_DEBUG_SEMIHOSTING + #include CONFIG_DEBUG_LL_INCLUDE ENTRY(putc) @@ -10,3 +12,29 @@ ENTRY(putc) busyuart r3, r1 mov pc, lr ENDPROC(putc) + +#else + +ENTRY(putc) + adr r1, 1f + ldmia r1, {r2, r3} + add r2, r2, r1 + ldr r1, [r2, r3] + strb r0, [r1] + mov r0, #0x03 @ SYS_WRITEC + ARM( svc #0x123456 ) + THUMB( svc #0xab ) + mov pc, lr + .align 2 +1: .word _GLOBAL_OFFSET_TABLE_ - . + .word semi_writec_buf(GOT) +ENDPROC(putc) + + .bss + .global semi_writec_buf + .type semi_writec_buf, %object +semi_writec_buf: + .space 4 + .size semi_writec_buf, 4 + +#endif -- cgit v0.10.2 From 92bdd3f5eba299b33c2f4407977d6fa2e2a6a0da Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 31 May 2013 22:49:22 +0100 Subject: ARM: 7742/1: topology: export cpu_topology The cpu_topology symbol is required by any driver using the topology interfaces, which leads to a couple of build errors: ERROR: "cpu_topology" [drivers/net/ethernet/sfc/sfc.ko] undefined! ERROR: "cpu_topology" [drivers/cpufreq/arm_big_little.ko] undefined! ERROR: "cpu_topology" [drivers/block/mtip32xx/mtip32xx.ko] undefined! The obvious solution is to export this symbol. Signed-off-by: Arnd Bergmann Acked-by: Will Deacon Cc: stable@vger.kernel.org Cc: Nicolas Pitre Cc: Vincent Guittot Signed-off-by: Russell King diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index f10316b..c5a5954 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -13,6 +13,7 @@ #include #include +#include #include #include #include @@ -200,6 +201,7 @@ static inline void update_cpu_power(unsigned int cpuid, unsigned int mpidr) {} * cpu topology table */ struct cputopo_arm cpu_topology[NR_CPUS]; +EXPORT_SYMBOL_GPL(cpu_topology); const struct cpumask *cpu_coregroup_mask(int cpu) { -- cgit v0.10.2 From da94a829305f1c217cfdf6771cb1faca0917e3b9 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 31 May 2013 22:50:47 +0100 Subject: ARM: 7743/1: compressed/head.S: work around new binutils warning In August 2012, Matthew Gretton-Dann checked a change into binutils labelled "Error on obsolete & warn on deprecated registers", apparently as part of ARMv8 support. Apparently, this was supposed to emit the message "Warning: This coprocessor register access is deprecated in ARMv8" when using certain mcr/mrc instructions and building for ARMv8. Unfortunately, the message that is actually emitted appears to be '(null)', which is less helpful in comparison. Even more unfortunately, this is biting us on every single kernel build with a new gas, because arch/arm/boot/compressed/head.S and some other files in that directory are built with -march=all since kernel commit 80cec14a8 "[ARM] Add -march=all to assembly file build in arch/arm/boot/compressed" back in v2.6.28. This patch reverts Russell's nice solution and instead marks the head.S file to be built for armv7-a, which fortunately lets us build all instructions in that file without warnings even on the broken binutils. Without this patch, building anything results in: arch/arm/boot/compressed/head.S: Assembler messages: arch/arm/boot/compressed/head.S:565: Warning: (null) arch/arm/boot/compressed/head.S:676: Warning: (null) arch/arm/boot/compressed/head.S:698: Warning: (null) arch/arm/boot/compressed/head.S:722: Warning: (null) arch/arm/boot/compressed/head.S:726: Warning: (null) arch/arm/boot/compressed/head.S:957: Warning: (null) arch/arm/boot/compressed/head.S:996: Warning: (null) arch/arm/boot/compressed/head.S:997: Warning: (null) arch/arm/boot/compressed/head.S:1027: Warning: (null) arch/arm/boot/compressed/head.S:1035: Warning: (null) arch/arm/boot/compressed/head.S:1046: Warning: (null) arch/arm/boot/compressed/head.S:1060: Warning: (null) arch/arm/boot/compressed/head.S:1092: Warning: (null) arch/arm/boot/compressed/head.S:1094: Warning: (null) arch/arm/boot/compressed/head.S:1095: Warning: (null) arch/arm/boot/compressed/head.S:1102: Warning: (null) arch/arm/boot/compressed/head.S:1134: Warning: (null) Signed-off-by: Arnd Bergmann Cc: stable@vger.kernel.org Cc: Matthew Gretton-Dann Signed-off-by: Russell King diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 3580d57..79e9bdb 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -124,7 +124,7 @@ KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS)) endif ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj) -asflags-y := -Wa,-march=all -DZIMAGE +asflags-y := -DZIMAGE # Supply kernel BSS size to the decompressor via a linker symbol. KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \ diff --git a/arch/arm/boot/compressed/head-sa1100.S b/arch/arm/boot/compressed/head-sa1100.S index 6179d94..3115e31 100644 --- a/arch/arm/boot/compressed/head-sa1100.S +++ b/arch/arm/boot/compressed/head-sa1100.S @@ -11,6 +11,7 @@ #include .section ".start", "ax" + .arch armv4 __SA1100_start: diff --git a/arch/arm/boot/compressed/head-shark.S b/arch/arm/boot/compressed/head-shark.S index 089c560..92b5689 100644 --- a/arch/arm/boot/compressed/head-shark.S +++ b/arch/arm/boot/compressed/head-shark.S @@ -18,6 +18,7 @@ .section ".start", "ax" + .arch armv4 b __beginning __ofw_data: .long 0 @ the number of memory blocks diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index fe4d9c3..6938559 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -11,6 +11,7 @@ #include #include + .arch armv7-a /* * Debugging stuff * -- cgit v0.10.2 From ced2a3b84965f1be8b6a142d6029faf241f109af Mon Sep 17 00:00:00 2001 From: Marc C Date: Wed, 5 Jun 2013 22:02:23 +0100 Subject: ARM: 7750/1: update legacy CPU ID in decompressor cache support jump table The previous mask values for the legacy ARM CPU IDs were conflicting with the CPU ID assignments for late-generation CPUs (like the Qualcomm MSM/QSD or Broadcom Brahma-15 processors). This change corrects the legacy ARM CPU ID value so that the jump table can fall-through to the appropriate cache maintenance / MMU functions. Signed-off-by: Marc C Signed-off-by: Russell King diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 6938559..032a8d9 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -806,8 +806,8 @@ call_cache_fn: adr r12, proc_types .align 2 .type proc_types,#object proc_types: - .word 0x00000000 @ old ARM ID - .word 0x0000f000 + .word 0x41000000 @ old ARM ID + .word 0xff00f000 mov pc, lr THUMB( nop ) mov pc, lr -- cgit v0.10.2 From 509eb76ebf9771abc9fe51859382df2571f11447 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 5 Jun 2013 11:20:33 +0100 Subject: ARM: 7747/1: pcpu: ensure __my_cpu_offset cannot be re-ordered across barrier() __my_cpu_offset is non-volatile, since we want its value to be cached when we access several per-cpu variables in a row with preemption disabled. This means that we rely on preempt_{en,dis}able to hazard with the operation via the barrier() macro, so that we can't end up migrating CPUs without reloading the per-cpu offset. Unfortunately, GCC doesn't treat a "memory" clobber on a non-volatile asm block as a side-effect, and will happily re-order it before other memory clobbers (including those in prempt_disable()) and cache the value. This has been observed to break the cmpxchg logic in the slub allocator, leading to livelock in kmem_cache_alloc in mainline kernels. This patch adds a dummy memory input operand to __my_cpu_offset, forcing it to be ordered with respect to the barrier() macro. Cc: Cc: Rob Herring Reviewed-by: Nicolas Pitre Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/include/asm/percpu.h b/arch/arm/include/asm/percpu.h index 968c0a1..209e650 100644 --- a/arch/arm/include/asm/percpu.h +++ b/arch/arm/include/asm/percpu.h @@ -30,8 +30,15 @@ static inline void set_my_cpu_offset(unsigned long off) static inline unsigned long __my_cpu_offset(void) { unsigned long off; - /* Read TPIDRPRW */ - asm("mrc p15, 0, %0, c13, c0, 4" : "=r" (off) : : "memory"); + register unsigned long *sp asm ("sp"); + + /* + * Read TPIDRPRW. + * We want to allow caching the value, so avoid using volatile and + * instead use a fake stack read to hazard against barrier(). + */ + asm("mrc p15, 0, %0, c13, c0, 4" : "=r" (off) : "Q" (*sp)); + return off; } #define __my_cpu_offset __my_cpu_offset() -- cgit v0.10.2 From 29eb77825cc7da8d45b642de2de3d423dc8a363f Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 5 Jun 2013 12:26:50 +0200 Subject: arch, mm: Remove tlb_fast_mode() Since the introduction of preemptible mmu_gather TLB fast mode has been broken. TLB fast mode relies on there being absolutely no concurrency; it frees pages first and invalidates TLBs later. However now we can get concurrency and stuff goes *bang*. This patch removes all tlb_fast_mode() code; it was found the better option vs trying to patch the hole by entangling tlb invalidation with the scheduler. Cc: Thomas Gleixner Cc: Russell King Cc: Tony Luck Reported-by: Max Filippov Signed-off-by: Peter Zijlstra Signed-off-by: Linus Torvalds diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 99a1951..bdf2b84 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -33,18 +33,6 @@ #include #include -/* - * We need to delay page freeing for SMP as other CPUs can access pages - * which have been removed but not yet had their TLB entries invalidated. - * Also, as ARMv7 speculative prefetch can drag new entries into the TLB, - * we need to apply this same delaying tactic to ensure correct operation. - */ -#if defined(CONFIG_SMP) || defined(CONFIG_CPU_32v7) -#define tlb_fast_mode(tlb) 0 -#else -#define tlb_fast_mode(tlb) 1 -#endif - #define MMU_GATHER_BUNDLE 8 /* @@ -112,12 +100,10 @@ static inline void __tlb_alloc_page(struct mmu_gather *tlb) static inline void tlb_flush_mmu(struct mmu_gather *tlb) { tlb_flush(tlb); - if (!tlb_fast_mode(tlb)) { - free_pages_and_swap_cache(tlb->pages, tlb->nr); - tlb->nr = 0; - if (tlb->pages == tlb->local) - __tlb_alloc_page(tlb); - } + free_pages_and_swap_cache(tlb->pages, tlb->nr); + tlb->nr = 0; + if (tlb->pages == tlb->local) + __tlb_alloc_page(tlb); } static inline void @@ -178,11 +164,6 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) static inline int __tlb_remove_page(struct mmu_gather *tlb, struct page *page) { - if (tlb_fast_mode(tlb)) { - free_page_and_swap_cache(page); - return 1; /* avoid calling tlb_flush_mmu */ - } - tlb->pages[tlb->nr++] = page; VM_BUG_ON(tlb->nr > tlb->max); return tlb->max - tlb->nr; diff --git a/arch/ia64/include/asm/tlb.h b/arch/ia64/include/asm/tlb.h index c3ffe3e..ef3a9de 100644 --- a/arch/ia64/include/asm/tlb.h +++ b/arch/ia64/include/asm/tlb.h @@ -46,12 +46,6 @@ #include #include -#ifdef CONFIG_SMP -# define tlb_fast_mode(tlb) ((tlb)->nr == ~0U) -#else -# define tlb_fast_mode(tlb) (1) -#endif - /* * If we can't allocate a page to make a big batch of page pointers * to work on, then just handle a few from the on-stack structure. @@ -60,7 +54,7 @@ struct mmu_gather { struct mm_struct *mm; - unsigned int nr; /* == ~0U => fast mode */ + unsigned int nr; unsigned int max; unsigned char fullmm; /* non-zero means full mm flush */ unsigned char need_flush; /* really unmapped some PTEs? */ @@ -103,6 +97,7 @@ extern struct ia64_tr_entry *ia64_idtrs[NR_CPUS]; static inline void ia64_tlb_flush_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long end) { + unsigned long i; unsigned int nr; if (!tlb->need_flush) @@ -141,13 +136,11 @@ ia64_tlb_flush_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long e /* lastly, release the freed pages */ nr = tlb->nr; - if (!tlb_fast_mode(tlb)) { - unsigned long i; - tlb->nr = 0; - tlb->start_addr = ~0UL; - for (i = 0; i < nr; ++i) - free_page_and_swap_cache(tlb->pages[i]); - } + + tlb->nr = 0; + tlb->start_addr = ~0UL; + for (i = 0; i < nr; ++i) + free_page_and_swap_cache(tlb->pages[i]); } static inline void __tlb_alloc_page(struct mmu_gather *tlb) @@ -167,20 +160,7 @@ tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int full_m tlb->mm = mm; tlb->max = ARRAY_SIZE(tlb->local); tlb->pages = tlb->local; - /* - * Use fast mode if only 1 CPU is online. - * - * It would be tempting to turn on fast-mode for full_mm_flush as well. But this - * doesn't work because of speculative accesses and software prefetching: the page - * table of "mm" may (and usually is) the currently active page table and even - * though the kernel won't do any user-space accesses during the TLB shoot down, a - * compiler might use speculation or lfetch.fault on what happens to be a valid - * user-space address. This in turn could trigger a TLB miss fault (or a VHPT - * walk) and re-insert a TLB entry we just removed. Slow mode avoids such - * problems. (We could make fast-mode work by switching the current task to a - * different "mm" during the shootdown.) --davidm 08/02/2002 - */ - tlb->nr = (num_online_cpus() == 1) ? ~0U : 0; + tlb->nr = 0; tlb->fullmm = full_mm_flush; tlb->start_addr = ~0UL; } @@ -214,11 +194,6 @@ static inline int __tlb_remove_page(struct mmu_gather *tlb, struct page *page) { tlb->need_flush = 1; - if (tlb_fast_mode(tlb)) { - free_page_and_swap_cache(page); - return 1; /* avoid calling tlb_flush_mmu */ - } - if (!tlb->nr && tlb->pages == tlb->local) __tlb_alloc_page(tlb); diff --git a/include/asm-generic/tlb.h b/include/asm-generic/tlb.h index b1b1fa6..13821c3 100644 --- a/include/asm-generic/tlb.h +++ b/include/asm-generic/tlb.h @@ -97,11 +97,9 @@ struct mmu_gather { unsigned long start; unsigned long end; unsigned int need_flush : 1, /* Did free PTEs */ - fast_mode : 1; /* No batching */ - /* we are in the middle of an operation to clear * a full mm and can make some optimizations */ - unsigned int fullmm : 1, + fullmm : 1, /* we have performed an operation which * requires a complete flush of the tlb */ need_flush_all : 1; @@ -114,19 +112,6 @@ struct mmu_gather { #define HAVE_GENERIC_MMU_GATHER -static inline int tlb_fast_mode(struct mmu_gather *tlb) -{ -#ifdef CONFIG_SMP - return tlb->fast_mode; -#else - /* - * For UP we don't need to worry about TLB flush - * and page free order so much.. - */ - return 1; -#endif -} - void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, bool fullmm); void tlb_flush_mmu(struct mmu_gather *tlb); void tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, diff --git a/mm/memory.c b/mm/memory.c index 6dc1882..61a262b 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -220,7 +220,6 @@ void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, bool fullmm) tlb->start = -1UL; tlb->end = 0; tlb->need_flush = 0; - tlb->fast_mode = (num_possible_cpus() == 1); tlb->local.next = NULL; tlb->local.nr = 0; tlb->local.max = ARRAY_SIZE(tlb->__pages); @@ -244,9 +243,6 @@ void tlb_flush_mmu(struct mmu_gather *tlb) tlb_table_flush(tlb); #endif - if (tlb_fast_mode(tlb)) - return; - for (batch = &tlb->local; batch; batch = batch->next) { free_pages_and_swap_cache(batch->pages, batch->nr); batch->nr = 0; @@ -288,11 +284,6 @@ int __tlb_remove_page(struct mmu_gather *tlb, struct page *page) VM_BUG_ON(!tlb->need_flush); - if (tlb_fast_mode(tlb)) { - free_page_and_swap_cache(page); - return 1; /* avoid calling tlb_flush_mmu() */ - } - batch = tlb->active; batch->pages[batch->nr++] = page; if (batch->nr == batch->max) { -- cgit v0.10.2 From 406b5ee22215554a37760b6fa807da6ad4d52f52 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Tue, 28 May 2013 01:23:22 +0000 Subject: MIPS: rtlx: Fix implicit declaration of function set_vi_handler() arch/mips/kernel/rtlx.c: In function 'rtlx_module_init': arch/mips/kernel/rtlx.c:523:3: error: implicit declaration of function 'set_vi_handler' [-Werror=implicit-function-declaration] Signed-off-by: Yoichi Yuasa Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5340/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c index 93c070b..6fa198d 100644 --- a/arch/mips/kernel/rtlx.c +++ b/arch/mips/kernel/rtlx.c @@ -40,6 +40,7 @@ #include #include #include +#include static struct rtlx_info *rtlx; static int major; -- cgit v0.10.2 From 38c3c0f6733bec1d1841915a9a82d2c324362686 Mon Sep 17 00:00:00 2001 From: David Daney Date: Fri, 24 May 2013 16:23:02 +0000 Subject: MIPS: OCTEON: Improve _machine_halt implementation. As noted by Wladislav Wiebe: $ halt .. Sent SIGKILL to all processes Requesting system halt [66.729373] System halted. [66.733244] [66.734761] ===================================== [66.739473] [ BUG: lock held at task exit time! ] [66.744188] 3.8.7-0-sampleversion-fct #49 Tainted: G O [66.750202] ------------------------------------- [66.754913] init/21479 is exiting with locks still held! [66.760234] 1 lock held by init/21479: [66.763990] #0: (reboot_mutex){+.+...}, at: [] SyS_reboot+0xe0/0x218 [66.772165] [66.772165] stack backtrace: [66.776532] Call Trace: [66.778992] [] dump_stack+0x8/0x34 [66.783972] [] do_exit+0x610/0xa70 [66.788948] [] SyS_reboot+0x1c0/0x218 [66.794186] [] handle_sys64+0x44/0x64 This is an alternative fix to the one sent by Wladislav. We kill the watchdog for each CPU and then spin in WAIT with interrupts disabled. This is the lowest power mode for the OCTEON. If we were to spin with interrupts enabled, we would get a continual stream of warning messages and backtraces from the lockup detector, so I chose to disable interrupts. Signed-off-by: David Daney Cc: Maxim Uvarov Cc: Wladislav Wiebe Cc: linux-mips@linux-mips.org Cc: David Daney Patchwork: https://patchwork.linux-mips.org/patch/5324/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index b0baa29..01b1b3f 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -428,13 +428,16 @@ static void octeon_restart(char *command) */ static void octeon_kill_core(void *arg) { - mb(); - if (octeon_is_simulation()) { - /* The simulator needs the watchdog to stop for dead cores */ - cvmx_write_csr(CVMX_CIU_WDOGX(cvmx_get_core_num()), 0); + if (octeon_is_simulation()) /* A break instruction causes the simulator stop a core */ - asm volatile ("sync\nbreak"); - } + asm volatile ("break" ::: "memory"); + + local_irq_disable(); + /* Disable watchdog on this core. */ + cvmx_write_csr(CVMX_CIU_WDOGX(cvmx_get_core_num()), 0); + /* Spin in a low power mode. */ + while (true) + asm volatile ("wait" ::: "memory"); } -- cgit v0.10.2 From 7b741aa4067b375caa4fce41e292d2f60cf9c98a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 29 May 2013 00:48:10 +0200 Subject: MIPS: Compat: Fix cputime_to_timeval() arguments in compat binfmt_elf. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit cputime_to_timeval() takes a struct timeval *as its second argument but a struct compat_timeval * will be passed resulting in: CC arch/mips/kernel/binfmt_elfn32.o In file included from arch/mips/kernel/binfmt_elfn32.c:122:0: arch/mips/kernel/../../../fs/binfmt_elf.c: In function ‘fill_prstatus’: arch/mips/kernel/../../../fs/binfmt_elf.c:1330:3: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default] In file included from include/asm-generic/cputime.h:12:0, from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4, from include/linux/sched.h:28, from include/linux/ptrace.h:5, from include/uapi/linux/elfcore.h:7, from include/linux/elfcore.h:7, from arch/mips/kernel/binfmt_elfn32.c:55: include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’ In file included from arch/mips/kernel/binfmt_elfn32.c:122:0: arch/mips/kernel/../../../fs/binfmt_elf.c:1331:3: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default] In file included from include/asm-generic/cputime.h:12:0, from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4, from include/linux/sched.h:28, from include/linux/ptrace.h:5, from include/uapi/linux/elfcore.h:7, from include/linux/elfcore.h:7, from arch/mips/kernel/binfmt_elfn32.c:55: include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’ In file included from arch/mips/kernel/binfmt_elfn32.c:122:0: arch/mips/kernel/../../../fs/binfmt_elf.c:1336:3: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default] In file included from include/asm-generic/cputime.h:12:0, from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4, from include/linux/sched.h:28, from include/linux/ptrace.h:5, from include/uapi/linux/elfcore.h:7, from include/linux/elfcore.h:7, from arch/mips/kernel/binfmt_elfn32.c:55: include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’ In file included from arch/mips/kernel/binfmt_elfn32.c:122:0: arch/mips/kernel/../../../fs/binfmt_elf.c:1337:3: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default] In file included from include/asm-generic/cputime.h:12:0, from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4, from include/linux/sched.h:28, from include/linux/ptrace.h:5, from include/uapi/linux/elfcore.h:7, from include/linux/elfcore.h:7, from arch/mips/kernel/binfmt_elfn32.c:55: include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’ In file included from arch/mips/kernel/binfmt_elfn32.c:122:0: arch/mips/kernel/../../../fs/binfmt_elf.c:1339:2: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default] In file included from include/asm-generic/cputime.h:12:0, from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4, from include/linux/sched.h:28, from include/linux/ptrace.h:5, from include/uapi/linux/elfcore.h:7, from include/linux/elfcore.h:7, from arch/mips/kernel/binfmt_elfn32.c:55: include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’ In file included from arch/mips/kernel/binfmt_elfn32.c:122:0: arch/mips/kernel/../../../fs/binfmt_elf.c:1340:2: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default] In file included from include/asm-generic/cputime.h:12:0, from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4, from include/linux/sched.h:28, from include/linux/ptrace.h:5, from include/uapi/linux/elfcore.h:7, from include/linux/elfcore.h:7, from arch/mips/kernel/binfmt_elfn32.c:55: include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’ AS arch/mips/kernel/scall64-n32.o CC arch/mips/kernel/signal_n32.o CC arch/mips/kernel/binfmt_elfo32.o In file included from arch/mips/kernel/binfmt_elfo32.c:165:0: arch/mips/kernel/../../../fs/binfmt_elf.c: In function ‘fill_prstatus’: arch/mips/kernel/../../../fs/binfmt_elf.c:1330:3: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default] In file included from include/asm-generic/cputime.h:12:0, from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4, from include/linux/sched.h:28, from include/linux/ptrace.h:5, from include/uapi/linux/elfcore.h:7, from include/linux/elfcore.h:7, from arch/mips/kernel/binfmt_elfo32.c:78: include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’ In file included from arch/mips/kernel/binfmt_elfo32.c:165:0: arch/mips/kernel/../../../fs/binfmt_elf.c:1331:3: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default] In file included from include/asm-generic/cputime.h:12:0, from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4, from include/linux/sched.h:28, from include/linux/ptrace.h:5, from include/uapi/linux/elfcore.h:7, from include/linux/elfcore.h:7, from arch/mips/kernel/binfmt_elfo32.c:78: include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’ In file included from arch/mips/kernel/binfmt_elfo32.c:165:0: arch/mips/kernel/../../../fs/binfmt_elf.c:1336:3: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default] In file included from include/asm-generic/cputime.h:12:0, from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4, from include/linux/sched.h:28, from include/linux/ptrace.h:5, from include/uapi/linux/elfcore.h:7, from include/linux/elfcore.h:7, from arch/mips/kernel/binfmt_elfo32.c:78: include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’ In file included from arch/mips/kernel/binfmt_elfo32.c:165:0: arch/mips/kernel/../../../fs/binfmt_elf.c:1337:3: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default] In file included from include/asm-generic/cputime.h:12:0, from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4, from include/linux/sched.h:28, from include/linux/ptrace.h:5, from include/uapi/linux/elfcore.h:7, from include/linux/elfcore.h:7, from arch/mips/kernel/binfmt_elfo32.c:78: include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’ In file included from arch/mips/kernel/binfmt_elfo32.c:165:0: arch/mips/kernel/../../../fs/binfmt_elf.c:1339:2: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default] In file included from include/asm-generic/cputime.h:12:0, from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4, from include/linux/sched.h:28, from include/linux/ptrace.h:5, from include/uapi/linux/elfcore.h:7, from include/linux/elfcore.h:7, from arch/mips/kernel/binfmt_elfo32.c:78: include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’ In file included from arch/mips/kernel/binfmt_elfo32.c:165:0: arch/mips/kernel/../../../fs/binfmt_elf.c:1340:2: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default] In file included from include/asm-generic/cputime.h:12:0, from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4, from include/linux/sched.h:28, from include/linux/ptrace.h:5, from include/uapi/linux/elfcore.h:7, from include/linux/elfcore.h:7, from arch/mips/kernel/binfmt_elfo32.c:78: include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’ Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/binfmt_elfn32.c b/arch/mips/kernel/binfmt_elfn32.c index e06f777..1188e00 100644 --- a/arch/mips/kernel/binfmt_elfn32.c +++ b/arch/mips/kernel/binfmt_elfn32.c @@ -119,4 +119,15 @@ MODULE_AUTHOR("Ralf Baechle (ralf@linux-mips.org)"); #undef TASK_SIZE #define TASK_SIZE TASK_SIZE32 +#undef cputime_to_timeval +#define cputime_to_timeval cputime_to_compat_timeval +static __inline__ void +cputime_to_compat_timeval(const cputime_t cputime, struct compat_timeval *value) +{ + unsigned long jiffies = cputime_to_jiffies(cputime); + + value->tv_usec = (jiffies % HZ) * (1000000L / HZ); + value->tv_sec = jiffies / HZ; +} + #include "../../../fs/binfmt_elf.c" diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c index 97c5a16..202e581 100644 --- a/arch/mips/kernel/binfmt_elfo32.c +++ b/arch/mips/kernel/binfmt_elfo32.c @@ -162,4 +162,15 @@ MODULE_AUTHOR("Ralf Baechle (ralf@linux-mips.org)"); #undef TASK_SIZE #define TASK_SIZE TASK_SIZE32 +#undef cputime_to_timeval +#define cputime_to_timeval cputime_to_compat_timeval +static __inline__ void +cputime_to_compat_timeval(const cputime_t cputime, struct compat_timeval *value) +{ + unsigned long jiffies = cputime_to_jiffies(cputime); + + value->tv_usec = (jiffies % HZ) * (1000000L / HZ); + value->tv_sec = jiffies / HZ; +} + #include "../../../fs/binfmt_elf.c" -- cgit v0.10.2 From cdfce53986a39daf039b62b69026867734d8430a Mon Sep 17 00:00:00 2001 From: John Crispin Date: Thu, 6 Jun 2013 12:55:53 +0000 Subject: MIPS: ralink: add missing SZ_1M multiplier On RT5350 the memory size is set to Bytes and not MegaBytes due to a missing multiplier. Signed-off-by: John Crispin Cc: John Crispin Patchwork: https://patchwork.linux-mips.org/patch/5378/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c index fb15695..6b5f340 100644 --- a/arch/mips/ralink/of.c +++ b/arch/mips/ralink/of.c @@ -88,7 +88,7 @@ void __init plat_mem_setup(void) __dt_setup_arch(&__dtb_start); if (soc_info.mem_size) - add_memory_region(soc_info.mem_base, soc_info.mem_size, + add_memory_region(soc_info.mem_base, soc_info.mem_size * SZ_1M, BOOT_MEM_RAM); else detect_memory_region(soc_info.mem_base, -- cgit v0.10.2 From a93d8a1cea0899982993e9a93404c6f78b123697 Mon Sep 17 00:00:00 2001 From: Jean-Philippe Francois Date: Thu, 6 Jun 2013 08:48:07 -0600 Subject: ARM: omap3: clock: fix wrong container_of in clock36xx.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit omap36xx_pwrdn_clk_enable_with_hsdiv_restore expects the parent hw of the clock to be a clk_hw_omap. However, looking at cclock3xxx_data.c, all concerned clock have parent defined as clk_divider. Fix the function to use clk_divider. Tested with 3.9 on dm3730. Signed-off-by: Jean-Philippe François Cc: NeilBrown Cc: Mike Turquette Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/clock36xx.c b/arch/arm/mach-omap2/clock36xx.c index 8f3bf4e..bbd6a3f 100644 --- a/arch/arm/mach-omap2/clock36xx.c +++ b/arch/arm/mach-omap2/clock36xx.c @@ -20,11 +20,12 @@ #include #include +#include #include #include "clock.h" #include "clock36xx.h" - +#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw) /** * omap36xx_pwrdn_clk_enable_with_hsdiv_restore - enable clocks suffering @@ -39,29 +40,28 @@ */ int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *clk) { - struct clk_hw_omap *parent; + struct clk_divider *parent; struct clk_hw *parent_hw; - u32 dummy_v, orig_v, clksel_shift; + u32 dummy_v, orig_v; int ret; /* Clear PWRDN bit of HSDIVIDER */ ret = omap2_dflt_clk_enable(clk); parent_hw = __clk_get_hw(__clk_get_parent(clk->clk)); - parent = to_clk_hw_omap(parent_hw); + parent = to_clk_divider(parent_hw); /* Restore the dividers */ if (!ret) { - clksel_shift = __ffs(parent->clksel_mask); - orig_v = __raw_readl(parent->clksel_reg); + orig_v = __raw_readl(parent->reg); dummy_v = orig_v; /* Write any other value different from the Read value */ - dummy_v ^= (1 << clksel_shift); - __raw_writel(dummy_v, parent->clksel_reg); + dummy_v ^= (1 << parent->shift); + __raw_writel(dummy_v, parent->reg); /* Write the original divider */ - __raw_writel(orig_v, parent->clksel_reg); + __raw_writel(orig_v, parent->reg); } return ret; -- cgit v0.10.2 From bb9b8e86ad083ecb2567ae909c1d6cb0bbaa60fe Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 3 Jun 2013 15:28:46 +1000 Subject: xfs: rework dquot CRCs Calculating dquot CRCs when the backing buffer is written back just doesn't work reliably. There are several places which manipulate dquots directly in the buffers, and they don't calculate CRCs appropriately, nor do they always set the buffer up to calculate CRCs appropriately. Firstly, if we log a dquot buffer (e.g. during allocation) it gets logged without valid CRC, and so on recovery we end up with a dquot that is not valid. Secondly, if we recover/repair a dquot, we don't have a verifier attached to the buffer and hence CRCs are not calculated on the way down to disk. Thirdly, calculating the CRC after we've changed the contents means that if we re-read the dquot from the buffer, we cannot verify the contents of the dquot are valid, as the CRC is invalid. So, to avoid all the dquot CRC errors that are being detected by the read verifier, change to using the same model as for inodes. That is, dquot CRCs are calculated and written to the backing buffer at the time the dquot is flushed to the backing buffer. If we modify the dquot directly in the backing buffer, calculate the CRC immediately after the modification is complete. Hence the dquot in the on-disk buffer should always have a valid CRC. Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 6fcdc59de28817d1fbf1bd58cc01f4f3fac858fb) diff --git a/fs/xfs/xfs_dquot.c b/fs/xfs/xfs_dquot.c index a41f8bf..044e97a 100644 --- a/fs/xfs/xfs_dquot.c +++ b/fs/xfs/xfs_dquot.c @@ -249,8 +249,11 @@ xfs_qm_init_dquot_blk( d->dd_diskdq.d_version = XFS_DQUOT_VERSION; d->dd_diskdq.d_id = cpu_to_be32(curid); d->dd_diskdq.d_flags = type; - if (xfs_sb_version_hascrc(&mp->m_sb)) + if (xfs_sb_version_hascrc(&mp->m_sb)) { uuid_copy(&d->dd_uuid, &mp->m_sb.sb_uuid); + xfs_update_cksum((char *)d, sizeof(struct xfs_dqblk), + XFS_DQUOT_CRC_OFF); + } } xfs_trans_dquot_buf(tp, bp, @@ -286,23 +289,6 @@ xfs_dquot_set_prealloc_limits(struct xfs_dquot *dqp) dqp->q_low_space[XFS_QLOWSP_5_PCNT] = space * 5; } -STATIC void -xfs_dquot_buf_calc_crc( - struct xfs_mount *mp, - struct xfs_buf *bp) -{ - struct xfs_dqblk *d = (struct xfs_dqblk *)bp->b_addr; - int i; - - if (!xfs_sb_version_hascrc(&mp->m_sb)) - return; - - for (i = 0; i < mp->m_quotainfo->qi_dqperchunk; i++, d++) { - xfs_update_cksum((char *)d, sizeof(struct xfs_dqblk), - offsetof(struct xfs_dqblk, dd_crc)); - } -} - STATIC bool xfs_dquot_buf_verify_crc( struct xfs_mount *mp, @@ -328,12 +314,11 @@ xfs_dquot_buf_verify_crc( for (i = 0; i < ndquots; i++, d++) { if (!xfs_verify_cksum((char *)d, sizeof(struct xfs_dqblk), - offsetof(struct xfs_dqblk, dd_crc))) + XFS_DQUOT_CRC_OFF)) return false; if (!uuid_equal(&d->dd_uuid, &mp->m_sb.sb_uuid)) return false; } - return true; } @@ -393,6 +378,11 @@ xfs_dquot_buf_read_verify( } } +/* + * we don't calculate the CRC here as that is done when the dquot is flushed to + * the buffer after the update is done. This ensures that the dquot in the + * buffer always has an up-to-date CRC value. + */ void xfs_dquot_buf_write_verify( struct xfs_buf *bp) @@ -404,7 +394,6 @@ xfs_dquot_buf_write_verify( xfs_buf_ioerror(bp, EFSCORRUPTED); return; } - xfs_dquot_buf_calc_crc(mp, bp); } const struct xfs_buf_ops xfs_dquot_buf_ops = { @@ -1151,11 +1140,17 @@ xfs_qm_dqflush( * copy the lsn into the on-disk dquot now while we have the in memory * dquot here. This can't be done later in the write verifier as we * can't get access to the log item at that point in time. + * + * We also calculate the CRC here so that the on-disk dquot in the + * buffer always has a valid CRC. This ensures there is no possibility + * of a dquot without an up-to-date CRC getting to disk. */ if (xfs_sb_version_hascrc(&mp->m_sb)) { struct xfs_dqblk *dqb = (struct xfs_dqblk *)ddqp; dqb->dd_lsn = cpu_to_be64(dqp->q_logitem.qli_item.li_lsn); + xfs_update_cksum((char *)dqb, sizeof(struct xfs_dqblk), + XFS_DQUOT_CRC_OFF); } /* diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index d9e4d3c..d6204d1 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -2266,6 +2266,12 @@ xfs_qm_dqcheck( d->dd_diskdq.d_flags = type; d->dd_diskdq.d_id = cpu_to_be32(id); + if (xfs_sb_version_hascrc(&mp->m_sb)) { + uuid_copy(&d->dd_uuid, &mp->m_sb.sb_uuid); + xfs_update_cksum((char *)d, sizeof(struct xfs_dqblk), + XFS_DQUOT_CRC_OFF); + } + return errs; } @@ -2793,6 +2799,10 @@ xlog_recover_dquot_pass2( } memcpy(ddq, recddq, item->ri_buf[1].i_len); + if (xfs_sb_version_hascrc(&mp->m_sb)) { + xfs_update_cksum((char *)ddq, sizeof(struct xfs_dqblk), + XFS_DQUOT_CRC_OFF); + } ASSERT(dq_f->qlf_size == 2); ASSERT(bp->b_target->bt_mount == mp); diff --git a/fs/xfs/xfs_qm.c b/fs/xfs/xfs_qm.c index f41702b..b75c9bb 100644 --- a/fs/xfs/xfs_qm.c +++ b/fs/xfs/xfs_qm.c @@ -41,6 +41,7 @@ #include "xfs_qm.h" #include "xfs_trace.h" #include "xfs_icache.h" +#include "xfs_cksum.h" /* * The global quota manager. There is only one of these for the entire @@ -839,7 +840,7 @@ xfs_qm_reset_dqcounts( xfs_dqid_t id, uint type) { - xfs_disk_dquot_t *ddq; + struct xfs_dqblk *dqb; int j; trace_xfs_reset_dqcounts(bp, _RET_IP_); @@ -853,8 +854,12 @@ xfs_qm_reset_dqcounts( do_div(j, sizeof(xfs_dqblk_t)); ASSERT(mp->m_quotainfo->qi_dqperchunk == j); #endif - ddq = bp->b_addr; + dqb = bp->b_addr; for (j = 0; j < mp->m_quotainfo->qi_dqperchunk; j++) { + struct xfs_disk_dquot *ddq; + + ddq = (struct xfs_disk_dquot *)&dqb[j]; + /* * Do a sanity check, and if needed, repair the dqblk. Don't * output any warnings because it's perfectly possible to @@ -871,7 +876,12 @@ xfs_qm_reset_dqcounts( ddq->d_bwarns = 0; ddq->d_iwarns = 0; ddq->d_rtbwarns = 0; - ddq = (xfs_disk_dquot_t *) ((xfs_dqblk_t *)ddq + 1); + + if (xfs_sb_version_hascrc(&mp->m_sb)) { + xfs_update_cksum((char *)&dqb[j], + sizeof(struct xfs_dqblk), + XFS_DQUOT_CRC_OFF); + } } } @@ -907,19 +917,29 @@ xfs_qm_dqiter_bufs( XFS_FSB_TO_DADDR(mp, bno), mp->m_quotainfo->qi_dqchunklen, 0, &bp, &xfs_dquot_buf_ops); - if (error) - break; /* - * XXX(hch): need to figure out if it makes sense to validate - * the CRC here. + * CRC and validation errors will return a EFSCORRUPTED here. If + * this occurs, re-read without CRC validation so that we can + * repair the damage via xfs_qm_reset_dqcounts(). This process + * will leave a trace in the log indicating corruption has + * been detected. */ + if (error == EFSCORRUPTED) { + error = xfs_trans_read_buf(mp, NULL, mp->m_ddev_targp, + XFS_FSB_TO_DADDR(mp, bno), + mp->m_quotainfo->qi_dqchunklen, 0, &bp, + NULL); + } + + if (error) + break; + xfs_qm_reset_dqcounts(mp, bp, firstid, type); xfs_buf_delwri_queue(bp, buffer_list); xfs_buf_relse(bp); - /* - * goto the next block. - */ + + /* goto the next block. */ bno++; firstid += mp->m_quotainfo->qi_dqperchunk; } diff --git a/fs/xfs/xfs_quota.h b/fs/xfs/xfs_quota.h index c61e31c..c38068f 100644 --- a/fs/xfs/xfs_quota.h +++ b/fs/xfs/xfs_quota.h @@ -87,6 +87,8 @@ typedef struct xfs_dqblk { uuid_t dd_uuid; /* location information */ } xfs_dqblk_t; +#define XFS_DQUOT_CRC_OFF offsetof(struct xfs_dqblk, dd_crc) + /* * flags for q_flags field in the dquot. */ -- cgit v0.10.2 From ea929536a43226a01d1a73ac8b14d52e81163bd4 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 3 Jun 2013 15:28:49 +1000 Subject: xfs: fix remote attribute invalidation for a leaf When invalidating an attribute leaf block block, there might be remote attributes that it points to. With the recent rework of the remote attribute format, we have to make sure we calculate the length of the attribute correctly. We aren't doing that in xfs_attr3_leaf_inactive(), so fix it. Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Reviewed-by: Mark Tinguely Signed-off-by: Ben Myers (cherry picked from commit 59913f14dfe8eb772ff93eb442947451b4416329) diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index d788302..31d3cd1 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -3258,7 +3258,7 @@ xfs_attr3_leaf_inactive( name_rmt = xfs_attr3_leaf_name_remote(leaf, i); if (name_rmt->valueblk) { lp->valueblk = be32_to_cpu(name_rmt->valueblk); - lp->valuelen = XFS_B_TO_FSB(dp->i_mount, + lp->valuelen = xfs_attr3_rmt_blocks(dp->i_mount, be32_to_cpu(name_rmt->valuelen)); lp++; } -- cgit v0.10.2 From 75406170751b4de88a01f73dda56efa617ddd5d7 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Wed, 5 Jun 2013 12:09:07 +1000 Subject: xfs: fix log recovery transaction item reordering There are several constraints that inode allocation and unlink logging impose on log recovery. These all stem from the fact that inode alloc/unlink are logged in buffers, but all other inode changes are logged in inode items. Hence there are ordering constraints that recovery must follow to ensure the correct result occurs. As it turns out, this ordering has been working mostly by chance than good management. The existing code moves all buffers except cancelled buffers to the head of the list, and everything else to the tail of the list. The problem with this is that is interleaves inode items with the buffer cancellation items, and hence whether the inode item in an cancelled buffer gets replayed is essentially left to chance. Further, this ordering causes problems for log recovery when inode CRCs are enabled. It typically replays the inode unlink buffer long before it replays the inode core changes, and so the CRC recorded in an unlink buffer is going to be invalid and hence any attempt to validate the inode in the buffer is going to fail. Hence we really need to enforce the ordering that the inode alloc/unlink code has expected log recovery to have since inode chunk de-allocation was introduced back in 2003... Signed-off-by: Dave Chinner Reviewed-by: Mark Tinguely Signed-off-by: Ben Myers (cherry picked from commit a775ad778073d55744ed6709ccede36310638911) diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index d6204d1..83088d9 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -1599,10 +1599,43 @@ xlog_recover_add_to_trans( } /* - * Sort the log items in the transaction. Cancelled buffers need - * to be put first so they are processed before any items that might - * modify the buffers. If they are cancelled, then the modifications - * don't need to be replayed. + * Sort the log items in the transaction. + * + * The ordering constraints are defined by the inode allocation and unlink + * behaviour. The rules are: + * + * 1. Every item is only logged once in a given transaction. Hence it + * represents the last logged state of the item. Hence ordering is + * dependent on the order in which operations need to be performed so + * required initial conditions are always met. + * + * 2. Cancelled buffers are recorded in pass 1 in a separate table and + * there's nothing to replay from them so we can simply cull them + * from the transaction. However, we can't do that until after we've + * replayed all the other items because they may be dependent on the + * cancelled buffer and replaying the cancelled buffer can remove it + * form the cancelled buffer table. Hence they have tobe done last. + * + * 3. Inode allocation buffers must be replayed before inode items that + * read the buffer and replay changes into it. + * + * 4. Inode unlink buffers must be replayed after inode items are replayed. + * This ensures that inodes are completely flushed to the inode buffer + * in a "free" state before we remove the unlinked inode list pointer. + * + * Hence the ordering needs to be inode allocation buffers first, inode items + * second, inode unlink buffers third and cancelled buffers last. + * + * But there's a problem with that - we can't tell an inode allocation buffer + * apart from a regular buffer, so we can't separate them. We can, however, + * tell an inode unlink buffer from the others, and so we can separate them out + * from all the other buffers and move them to last. + * + * Hence, 4 lists, in order from head to tail: + * - buffer_list for all buffers except cancelled/inode unlink buffers + * - item_list for all non-buffer items + * - inode_buffer_list for inode unlink buffers + * - cancel_list for the cancelled buffers */ STATIC int xlog_recover_reorder_trans( @@ -1612,6 +1645,10 @@ xlog_recover_reorder_trans( { xlog_recover_item_t *item, *n; LIST_HEAD(sort_list); + LIST_HEAD(cancel_list); + LIST_HEAD(buffer_list); + LIST_HEAD(inode_buffer_list); + LIST_HEAD(inode_list); list_splice_init(&trans->r_itemq, &sort_list); list_for_each_entry_safe(item, n, &sort_list, ri_list) { @@ -1619,12 +1656,18 @@ xlog_recover_reorder_trans( switch (ITEM_TYPE(item)) { case XFS_LI_BUF: - if (!(buf_f->blf_flags & XFS_BLF_CANCEL)) { + if (buf_f->blf_flags & XFS_BLF_CANCEL) { trace_xfs_log_recover_item_reorder_head(log, trans, item, pass); - list_move(&item->ri_list, &trans->r_itemq); + list_move(&item->ri_list, &cancel_list); break; } + if (buf_f->blf_flags & XFS_BLF_INODE_BUF) { + list_move(&item->ri_list, &inode_buffer_list); + break; + } + list_move_tail(&item->ri_list, &buffer_list); + break; case XFS_LI_INODE: case XFS_LI_DQUOT: case XFS_LI_QUOTAOFF: @@ -1632,7 +1675,7 @@ xlog_recover_reorder_trans( case XFS_LI_EFI: trace_xfs_log_recover_item_reorder_tail(log, trans, item, pass); - list_move_tail(&item->ri_list, &trans->r_itemq); + list_move_tail(&item->ri_list, &inode_list); break; default: xfs_warn(log->l_mp, @@ -1643,6 +1686,14 @@ xlog_recover_reorder_trans( } } ASSERT(list_empty(&sort_list)); + if (!list_empty(&buffer_list)) + list_splice(&buffer_list, &trans->r_itemq); + if (!list_empty(&inode_list)) + list_splice_tail(&inode_list, &trans->r_itemq); + if (!list_empty(&inode_buffer_list)) + list_splice_tail(&inode_buffer_list, &trans->r_itemq); + if (!list_empty(&cancel_list)) + list_splice_tail(&cancel_list, &trans->r_itemq); return 0; } -- cgit v0.10.2 From ad868afddb908a5d4015c6b7637721b48fb9c8f9 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Wed, 5 Jun 2013 12:09:08 +1000 Subject: xfs: inode unlinked list needs to recalculate the inode CRC The inode unlinked list manipulations operate directly on the inode buffer, and so bypass the inode CRC calculation mechanisms. Hence an inode on the unlinked list has an invalid CRC. Fix this by recalculating the CRC whenever we modify an unlinked list pointer in an inode, ncluding during log recovery. This is trivial to do and results in unlinked list operations always leaving a consistent inode in the buffer. Signed-off-by: Dave Chinner Reviewed-by: Mark Tinguely Signed-off-by: Ben Myers (cherry picked from commit 0a32c26e720a8b38971d0685976f4a7d63f9e2ef) diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index efbe1ac..7f7be5f 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -1638,6 +1638,10 @@ xfs_iunlink( dip->di_next_unlinked = agi->agi_unlinked[bucket_index]; offset = ip->i_imap.im_boffset + offsetof(xfs_dinode_t, di_next_unlinked); + + /* need to recalc the inode CRC if appropriate */ + xfs_dinode_calc_crc(mp, dip); + xfs_trans_inode_buf(tp, ibp); xfs_trans_log_buf(tp, ibp, offset, (offset + sizeof(xfs_agino_t) - 1)); @@ -1723,6 +1727,10 @@ xfs_iunlink_remove( dip->di_next_unlinked = cpu_to_be32(NULLAGINO); offset = ip->i_imap.im_boffset + offsetof(xfs_dinode_t, di_next_unlinked); + + /* need to recalc the inode CRC if appropriate */ + xfs_dinode_calc_crc(mp, dip); + xfs_trans_inode_buf(tp, ibp); xfs_trans_log_buf(tp, ibp, offset, (offset + sizeof(xfs_agino_t) - 1)); @@ -1796,6 +1804,10 @@ xfs_iunlink_remove( dip->di_next_unlinked = cpu_to_be32(NULLAGINO); offset = ip->i_imap.im_boffset + offsetof(xfs_dinode_t, di_next_unlinked); + + /* need to recalc the inode CRC if appropriate */ + xfs_dinode_calc_crc(mp, dip); + xfs_trans_inode_buf(tp, ibp); xfs_trans_log_buf(tp, ibp, offset, (offset + sizeof(xfs_agino_t) - 1)); @@ -1809,6 +1821,10 @@ xfs_iunlink_remove( last_dip->di_next_unlinked = cpu_to_be32(next_agino); ASSERT(next_agino != 0); offset = last_offset + offsetof(xfs_dinode_t, di_next_unlinked); + + /* need to recalc the inode CRC if appropriate */ + xfs_dinode_calc_crc(mp, last_dip); + xfs_trans_inode_buf(tp, last_ibp); xfs_trans_log_buf(tp, last_ibp, offset, (offset + sizeof(xfs_agino_t) - 1)); diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index 83088d9..45a85ff 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -1912,6 +1912,15 @@ xlog_recover_do_inode_buffer( buffer_nextp = (xfs_agino_t *)xfs_buf_offset(bp, next_unlinked_offset); *buffer_nextp = *logged_nextp; + + /* + * If necessary, recalculate the CRC in the on-disk inode. We + * have to leave the inode in a consistent state for whoever + * reads it next.... + */ + xfs_dinode_calc_crc(mp, (struct xfs_dinode *) + xfs_buf_offset(bp, i * mp->m_sb.sb_inodesize)); + } return 0; -- cgit v0.10.2 From f763fd440e094be37b38596ee14f1d64caa9bf9c Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Wed, 5 Jun 2013 12:09:09 +1000 Subject: xfs: disable noattr2/attr2 mount options for CRC enabled filesystems attr2 format is always enabled for v5 superblock filesystems, so the mount options to enable or disable it need to be cause mount errors. Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Signed-off-by: Ben Myers (cherry picked from commit d3eaace84e40bf946129e516dcbd617173c1cf14) diff --git a/Documentation/filesystems/xfs.txt b/Documentation/filesystems/xfs.txt index 3e4b3dd..83577f0 100644 --- a/Documentation/filesystems/xfs.txt +++ b/Documentation/filesystems/xfs.txt @@ -33,6 +33,9 @@ When mounting an XFS filesystem, the following options are accepted. removing extended attributes) the on-disk superblock feature bit field will be updated to reflect this format being in use. + CRC enabled filesystems always use the attr2 format, and so + will reject the noattr2 mount option if it is set. + barrier Enables the use of block layer write barriers for writes into the journal and unwritten extent conversion. This allows for diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c index ea341ce..3033ba5 100644 --- a/fs/xfs/xfs_super.c +++ b/fs/xfs/xfs_super.c @@ -1373,6 +1373,17 @@ xfs_finish_flags( } /* + * V5 filesystems always use attr2 format for attributes. + */ + if (xfs_sb_version_hascrc(&mp->m_sb) && + (mp->m_flags & XFS_MOUNT_NOATTR2)) { + xfs_warn(mp, +"Cannot mount a V5 filesystem as %s. %s is always enabled for V5 filesystems.", + MNTOPT_NOATTR2, MNTOPT_ATTR2); + return XFS_ERROR(EINVAL); + } + + /* * mkfs'ed attr2 will turn on attr2 mount unless explicitly * told by noattr2 to turn it off */ -- cgit v0.10.2 From 0a8aa1939777dd114479677f0044652c1fd72398 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Wed, 5 Jun 2013 12:09:10 +1000 Subject: xfs: increase number of ACL entries for V5 superblocks The limit of 25 ACL entries is arbitrary, but baked into the on-disk format. For version 5 superblocks, increase it to the maximum nuber of ACLs that can fit into a single xattr. Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Reviewed-by: Mark Tinguely Signed-off-by: Ben Myers (cherry picked from commit 5c87d4bc1a86bd6e6754ac3d6e111d776ddcfe57) diff --git a/fs/xfs/xfs_acl.c b/fs/xfs/xfs_acl.c index 1d32f1d..306d883 100644 --- a/fs/xfs/xfs_acl.c +++ b/fs/xfs/xfs_acl.c @@ -21,6 +21,8 @@ #include "xfs_bmap_btree.h" #include "xfs_inode.h" #include "xfs_vnodeops.h" +#include "xfs_sb.h" +#include "xfs_mount.h" #include "xfs_trace.h" #include #include @@ -34,7 +36,9 @@ */ STATIC struct posix_acl * -xfs_acl_from_disk(struct xfs_acl *aclp) +xfs_acl_from_disk( + struct xfs_acl *aclp, + int max_entries) { struct posix_acl_entry *acl_e; struct posix_acl *acl; @@ -42,7 +46,7 @@ xfs_acl_from_disk(struct xfs_acl *aclp) unsigned int count, i; count = be32_to_cpu(aclp->acl_cnt); - if (count > XFS_ACL_MAX_ENTRIES) + if (count > max_entries) return ERR_PTR(-EFSCORRUPTED); acl = posix_acl_alloc(count, GFP_KERNEL); @@ -108,9 +112,9 @@ xfs_get_acl(struct inode *inode, int type) struct xfs_inode *ip = XFS_I(inode); struct posix_acl *acl; struct xfs_acl *xfs_acl; - int len = sizeof(struct xfs_acl); unsigned char *ea_name; int error; + int len; acl = get_cached_acl(inode, type); if (acl != ACL_NOT_CACHED) @@ -133,8 +137,8 @@ xfs_get_acl(struct inode *inode, int type) * If we have a cached ACLs value just return it, not need to * go out to the disk. */ - - xfs_acl = kzalloc(sizeof(struct xfs_acl), GFP_KERNEL); + len = XFS_ACL_MAX_SIZE(ip->i_mount); + xfs_acl = kzalloc(len, GFP_KERNEL); if (!xfs_acl) return ERR_PTR(-ENOMEM); @@ -153,7 +157,7 @@ xfs_get_acl(struct inode *inode, int type) goto out; } - acl = xfs_acl_from_disk(xfs_acl); + acl = xfs_acl_from_disk(xfs_acl, XFS_ACL_MAX_ENTRIES(ip->i_mount)); if (IS_ERR(acl)) goto out; @@ -189,16 +193,17 @@ xfs_set_acl(struct inode *inode, int type, struct posix_acl *acl) if (acl) { struct xfs_acl *xfs_acl; - int len; + int len = XFS_ACL_MAX_SIZE(ip->i_mount); - xfs_acl = kzalloc(sizeof(struct xfs_acl), GFP_KERNEL); + xfs_acl = kzalloc(len, GFP_KERNEL); if (!xfs_acl) return -ENOMEM; xfs_acl_to_disk(xfs_acl, acl); - len = sizeof(struct xfs_acl) - - (sizeof(struct xfs_acl_entry) * - (XFS_ACL_MAX_ENTRIES - acl->a_count)); + + /* subtract away the unused acl entries */ + len -= sizeof(struct xfs_acl_entry) * + (XFS_ACL_MAX_ENTRIES(ip->i_mount) - acl->a_count); error = -xfs_attr_set(ip, ea_name, (unsigned char *)xfs_acl, len, ATTR_ROOT); @@ -243,7 +248,7 @@ xfs_set_mode(struct inode *inode, umode_t mode) static int xfs_acl_exists(struct inode *inode, unsigned char *name) { - int len = sizeof(struct xfs_acl); + int len = XFS_ACL_MAX_SIZE(XFS_M(inode->i_sb)); return (xfs_attr_get(XFS_I(inode), name, NULL, &len, ATTR_ROOT|ATTR_KERNOVAL) == 0); @@ -379,7 +384,7 @@ xfs_xattr_acl_set(struct dentry *dentry, const char *name, goto out_release; error = -EINVAL; - if (acl->a_count > XFS_ACL_MAX_ENTRIES) + if (acl->a_count > XFS_ACL_MAX_ENTRIES(XFS_M(inode->i_sb))) goto out_release; if (type == ACL_TYPE_ACCESS) { diff --git a/fs/xfs/xfs_acl.h b/fs/xfs/xfs_acl.h index 39632d9..4016a56 100644 --- a/fs/xfs/xfs_acl.h +++ b/fs/xfs/xfs_acl.h @@ -22,19 +22,36 @@ struct inode; struct posix_acl; struct xfs_inode; -#define XFS_ACL_MAX_ENTRIES 25 #define XFS_ACL_NOT_PRESENT (-1) /* On-disk XFS access control list structure */ +struct xfs_acl_entry { + __be32 ae_tag; + __be32 ae_id; + __be16 ae_perm; + __be16 ae_pad; /* fill the implicit hole in the structure */ +}; + struct xfs_acl { - __be32 acl_cnt; - struct xfs_acl_entry { - __be32 ae_tag; - __be32 ae_id; - __be16 ae_perm; - } acl_entry[XFS_ACL_MAX_ENTRIES]; + __be32 acl_cnt; + struct xfs_acl_entry acl_entry[0]; }; +/* + * The number of ACL entries allowed is defined by the on-disk format. + * For v4 superblocks, that is limited to 25 entries. For v5 superblocks, it is + * limited only by the maximum size of the xattr that stores the information. + */ +#define XFS_ACL_MAX_ENTRIES(mp) \ + (xfs_sb_version_hascrc(&mp->m_sb) \ + ? (XATTR_SIZE_MAX - sizeof(struct xfs_acl)) / \ + sizeof(struct xfs_acl_entry) \ + : 25) + +#define XFS_ACL_MAX_SIZE(mp) \ + (sizeof(struct xfs_acl) + \ + sizeof(struct xfs_acl_entry) * XFS_ACL_MAX_ENTRIES((mp))) + /* On-disk XFS extended attribute names */ #define SGI_ACL_FILE (unsigned char *)"SGI_ACL_FILE" #define SGI_ACL_DEFAULT (unsigned char *)"SGI_ACL_DEFAULT" -- cgit v0.10.2 From 9eecf22d2b375b9064a20421c6c307b760b03d46 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 6 Jun 2013 13:32:47 +0200 Subject: USB: whiteheat: fix broken port configuration When configuring the port (e.g. set_termios) the port minor number rather than the port number was used in the request (and they only coincide for minor number 0). Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index b9fca35..347caad 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -649,7 +649,7 @@ static void firm_setup_port(struct tty_struct *tty) struct whiteheat_port_settings port_settings; unsigned int cflag = tty->termios.c_cflag; - port_settings.port = port->number + 1; + port_settings.port = port->number - port->serial->minor + 1; /* get the byte size */ switch (cflag & CSIZE) { -- cgit v0.10.2 From b8a24e6281d37243c06b9497dcbfaa98c1e2ad35 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Thu, 6 Jun 2013 12:57:24 +0200 Subject: USB: option: blacklist network interface on Huawei E1820 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The mode used by Windows for the Huawei E1820 will use the same ff/ff/ff class codes for both serial and network functions. Reported-by: Graham Inggs Signed-off-by: Bjørn Mork Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 93d02bc..66314c3 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -593,6 +593,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x14ac, 0xff, 0xff, 0xff), /* Huawei E1820 */ + .driver_info = (kernel_ulong_t) &net_intf1_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0xff, 0xff) }, -- cgit v0.10.2 From 73228a0538a70ebc4547bd09dee8971360dc1d87 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 5 Jun 2013 15:26:27 -0500 Subject: USB: option,zte_ev: move most ZTE CDMA devices to zte_ev Per some ZTE Linux drivers I found for the AC2716, the following patch moves most ZTE CDMA devices from option to zte_ev. The blacklist stuff that option does is not required with zte_ev, because it doesn't implement any of the send_setup hooks which the blacklist suppressed. I did not move the 2718 over because I could not find any ZTE Linux drivers for that device, nor even any Windows drivers. Signed-off-by: Dan Williams Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 66314c3..bd4323d 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -250,13 +250,7 @@ static void option_instat_callback(struct urb *urb); #define ZTE_PRODUCT_MF622 0x0001 #define ZTE_PRODUCT_MF628 0x0015 #define ZTE_PRODUCT_MF626 0x0031 -#define ZTE_PRODUCT_CDMA_TECH 0xfffe -#define ZTE_PRODUCT_AC8710 0xfff1 -#define ZTE_PRODUCT_AC2726 0xfff5 -#define ZTE_PRODUCT_AC8710T 0xffff #define ZTE_PRODUCT_MC2718 0xffe8 -#define ZTE_PRODUCT_AD3812 0xffeb -#define ZTE_PRODUCT_MC2716 0xffed #define BENQ_VENDOR_ID 0x04a5 #define BENQ_PRODUCT_H10 0x4068 @@ -495,18 +489,10 @@ static const struct option_blacklist_info zte_k3765_z_blacklist = { .reserved = BIT(4), }; -static const struct option_blacklist_info zte_ad3812_z_blacklist = { - .sendsetup = BIT(0) | BIT(1) | BIT(2), -}; - static const struct option_blacklist_info zte_mc2718_z_blacklist = { .sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4), }; -static const struct option_blacklist_info zte_mc2716_z_blacklist = { - .sendsetup = BIT(1) | BIT(2) | BIT(3), -}; - static const struct option_blacklist_info huawei_cdc12_blacklist = { .reserved = BIT(1) | BIT(2), }; @@ -799,7 +785,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1012, 0xff) }, { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) }, { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) }, - { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */ @@ -1201,16 +1186,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) }, + /* NOTE: most ZTE CDMA devices should be driven by zte_ev, not option */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist }, { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) }, { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) }, { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) }, diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c index 870e01e..fca4c75 100644 --- a/drivers/usb/serial/zte_ev.c +++ b/drivers/usb/serial/zte_ev.c @@ -273,11 +273,29 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) } static const struct usb_device_id id_table[] = { - { USB_DEVICE(0x19d2, 0xffff) }, /* AC8700 */ - { USB_DEVICE(0x19d2, 0xfffe) }, - { USB_DEVICE(0x19d2, 0xfffd) }, /* MG880 */ + /* AC8710, AC8710T */ + { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffff, 0xff, 0xff, 0xff) }, + /* AC8700 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfffe, 0xff, 0xff, 0xff) }, + /* MG880 */ + { USB_DEVICE(0x19d2, 0xfffd) }, + { USB_DEVICE(0x19d2, 0xfffc) }, + { USB_DEVICE(0x19d2, 0xfffb) }, + /* AC2726, AC8710_V3 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfff1, 0xff, 0xff, 0xff) }, + { USB_DEVICE(0x19d2, 0xfff6) }, + { USB_DEVICE(0x19d2, 0xfff7) }, + { USB_DEVICE(0x19d2, 0xfff8) }, + { USB_DEVICE(0x19d2, 0xfff9) }, + { USB_DEVICE(0x19d2, 0xffee) }, + /* AC2716, MC2716 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffed, 0xff, 0xff, 0xff) }, + /* AD3812 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffeb, 0xff, 0xff, 0xff) }, + { USB_DEVICE(0x19d2, 0xffec) }, { USB_DEVICE(0x05C6, 0x3197) }, { USB_DEVICE(0x05C6, 0x6000) }, + { USB_DEVICE(0x05C6, 0x9008) }, { }, }; MODULE_DEVICE_TABLE(usb, id_table); -- cgit v0.10.2 From f17a5194859a82afe4164e938b92035b86c55794 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Red Hat)" Date: Thu, 30 May 2013 21:10:37 -0400 Subject: tracing: Use current_uid() for critical time tracing The irqsoff tracer records the max time that interrupts are disabled. There are hooks in the assembly code that calls back into the tracer when interrupts are disabled or enabled. When they are enabled, the tracer checks if the amount of time they were disabled is larger than the previous recorded max interrupts off time. If it is, it creates a snapshot of the currently running trace to store where the last largest interrupts off time was held and how it happened. During testing, this RCU lockdep dump appeared: [ 1257.829021] =============================== [ 1257.829021] [ INFO: suspicious RCU usage. ] [ 1257.829021] 3.10.0-rc1-test+ #171 Tainted: G W [ 1257.829021] ------------------------------- [ 1257.829021] /home/rostedt/work/git/linux-trace.git/include/linux/rcupdate.h:780 rcu_read_lock() used illegally while idle! [ 1257.829021] [ 1257.829021] other info that might help us debug this: [ 1257.829021] [ 1257.829021] [ 1257.829021] RCU used illegally from idle CPU! [ 1257.829021] rcu_scheduler_active = 1, debug_locks = 0 [ 1257.829021] RCU used illegally from extended quiescent state! [ 1257.829021] 2 locks held by trace-cmd/4831: [ 1257.829021] #0: (max_trace_lock){......}, at: [] stop_critical_timing+0x1a3/0x209 [ 1257.829021] #1: (rcu_read_lock){.+.+..}, at: [] __update_max_tr+0x88/0x1ee [ 1257.829021] [ 1257.829021] stack backtrace: [ 1257.829021] CPU: 3 PID: 4831 Comm: trace-cmd Tainted: G W 3.10.0-rc1-test+ #171 [ 1257.829021] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007 [ 1257.829021] 0000000000000001 ffff880065f49da8 ffffffff8153dd2b ffff880065f49dd8 [ 1257.829021] ffffffff81092a00 ffff88006bd78680 ffff88007add7500 0000000000000003 [ 1257.829021] ffff88006bd78680 ffff880065f49e18 ffffffff810daebf ffffffff810dae5a [ 1257.829021] Call Trace: [ 1257.829021] [] dump_stack+0x19/0x1b [ 1257.829021] [] lockdep_rcu_suspicious+0x109/0x112 [ 1257.829021] [] __update_max_tr+0xed/0x1ee [ 1257.829021] [] ? __update_max_tr+0x88/0x1ee [ 1257.829021] [] ? user_enter+0xfd/0x107 [ 1257.829021] [] update_max_tr_single+0x11d/0x12d [ 1257.829021] [] ? user_enter+0xfd/0x107 [ 1257.829021] [] stop_critical_timing+0x141/0x209 [ 1257.829021] [] ? trace_hardirqs_on+0xd/0xf [ 1257.829021] [] ? user_enter+0xfd/0x107 [ 1257.829021] [] time_hardirqs_on+0x2a/0x2f [ 1257.829021] [] ? user_enter+0xfd/0x107 [ 1257.829021] [] trace_hardirqs_on_caller+0x16/0x197 [ 1257.829021] [] trace_hardirqs_on+0xd/0xf [ 1257.829021] [] user_enter+0xfd/0x107 [ 1257.829021] [] do_notify_resume+0x92/0x97 [ 1257.829021] [] int_signal+0x12/0x17 What happened was entering into the user code, the interrupts were enabled and a max interrupts off was recorded. The trace buffer was saved along with various information about the task: comm, pid, uid, priority, etc. The uid is recorded with task_uid(tsk). But this is a macro that uses rcu_read_lock() to retrieve the data, and this happened to happen where RCU is blind (user_enter). As only the preempt and irqs off tracers can have this happen, and they both only have the tsk == current, if tsk == current, use current_uid() instead of task_uid(), as current_uid() does not use RCU as only current can change its uid. This fixes the RCU suspicious splat. Signed-off-by: Steven Rostedt diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 4d79485..1a41023 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -843,7 +843,15 @@ __update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu) memcpy(max_data->comm, tsk->comm, TASK_COMM_LEN); max_data->pid = tsk->pid; - max_data->uid = task_uid(tsk); + /* + * If tsk == current, then use current_uid(), as that does not use + * RCU. The irq tracer can be called out of RCU scope. + */ + if (tsk == current) + max_data->uid = current_uid(); + else + max_data->uid = task_uid(tsk); + max_data->nice = tsk->static_prio - 20 - MAX_RT_PRIO; max_data->policy = tsk->policy; max_data->rt_priority = tsk->rt_priority; -- cgit v0.10.2 From 4089fe95bfed295c8ad38251d5fe02b6b0ba684c Mon Sep 17 00:00:00 2001 From: Nicolas Schichan Date: Thu, 6 Jun 2013 19:00:46 +0200 Subject: ARM: Kirkwood: handle mv88f6282 cpu in __kirkwood_variant(). MPP_F6281_MASK would be previously be returned when on mv88f6282, which would disallow some valid MPP configurations. Commit 830f8b91 (arm: plat-orion: fix printing of "MPP config unavailable on this hardware") made this problem visible as an invalid MPP configuration is now correctly detected and not applied. Signed-off-by: Nicolas Schichan Cc: # v3.9.x Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c index 827cde4..e96fd71 100644 --- a/arch/arm/mach-kirkwood/mpp.c +++ b/arch/arm/mach-kirkwood/mpp.c @@ -22,9 +22,10 @@ static unsigned int __init kirkwood_variant(void) kirkwood_pcie_id(&dev, &rev); - if ((dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0) || - (dev == MV88F6282_DEV_ID)) + if (dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0) return MPP_F6281_MASK; + if (dev == MV88F6282_DEV_ID) + return MPP_F6282_MASK; if (dev == MV88F6192_DEV_ID && rev >= MV88F6192_REV_A0) return MPP_F6192_MASK; if (dev == MV88F6180_DEV_ID) -- cgit v0.10.2 From a7526eb5d06b0084ef12d7b168d008fcf516caab Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Wed, 5 Jun 2013 19:38:26 +0000 Subject: net: Unbreak compat_sys_{send,recv}msg I broke them in this commit: commit 1be374a0518a288147c6a7398792583200a67261 Author: Andy Lutomirski Date: Wed May 22 14:07:44 2013 -0700 net: Block MSG_CMSG_COMPAT in send(m)msg and recv(m)msg This patch adds __sys_sendmsg and __sys_sendmsg as common helpers that accept MSG_CMSG_COMPAT and blocks MSG_CMSG_COMPAT at the syscall entrypoints. It also reverts some unnecessary checks in sys_socketcall. Apparently I was suffering from underscore blindness the first time around. Signed-off-by: Andy Lutomirski Tested-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/include/linux/socket.h b/include/linux/socket.h index 33bf2df..b10ce4b 100644 --- a/include/linux/socket.h +++ b/include/linux/socket.h @@ -320,6 +320,9 @@ extern int put_cmsg(struct msghdr*, int level, int type, int len, void *data); struct timespec; +/* The __sys_...msg variants allow MSG_CMSG_COMPAT */ +extern long __sys_recvmsg(int fd, struct msghdr __user *msg, unsigned flags); +extern long __sys_sendmsg(int fd, struct msghdr __user *msg, unsigned flags); extern int __sys_recvmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen, unsigned int flags, struct timespec *timeout); extern int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg, diff --git a/net/compat.c b/net/compat.c index 79ae884..f0a1ba6 100644 --- a/net/compat.c +++ b/net/compat.c @@ -734,19 +734,25 @@ static unsigned char nas[21] = { asmlinkage long compat_sys_sendmsg(int fd, struct compat_msghdr __user *msg, unsigned int flags) { - return sys_sendmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT); + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; + return __sys_sendmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT); } asmlinkage long compat_sys_sendmmsg(int fd, struct compat_mmsghdr __user *mmsg, unsigned int vlen, unsigned int flags) { + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; return __sys_sendmmsg(fd, (struct mmsghdr __user *)mmsg, vlen, flags | MSG_CMSG_COMPAT); } asmlinkage long compat_sys_recvmsg(int fd, struct compat_msghdr __user *msg, unsigned int flags) { - return sys_recvmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT); + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; + return __sys_recvmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT); } asmlinkage long compat_sys_recv(int fd, void __user *buf, size_t len, unsigned int flags) @@ -768,6 +774,9 @@ asmlinkage long compat_sys_recvmmsg(int fd, struct compat_mmsghdr __user *mmsg, int datagrams; struct timespec ktspec; + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; + if (COMPAT_USE_64BIT_TIME) return __sys_recvmmsg(fd, (struct mmsghdr __user *)mmsg, vlen, flags | MSG_CMSG_COMPAT, diff --git a/net/socket.c b/net/socket.c index 9ff6366..4ca1526 100644 --- a/net/socket.c +++ b/net/socket.c @@ -1956,7 +1956,7 @@ struct used_address { unsigned int name_len; }; -static int __sys_sendmsg(struct socket *sock, struct msghdr __user *msg, +static int ___sys_sendmsg(struct socket *sock, struct msghdr __user *msg, struct msghdr *msg_sys, unsigned int flags, struct used_address *used_address) { @@ -2071,26 +2071,30 @@ out: * BSD sendmsg interface */ -SYSCALL_DEFINE3(sendmsg, int, fd, struct msghdr __user *, msg, unsigned int, flags) +long __sys_sendmsg(int fd, struct msghdr __user *msg, unsigned flags) { int fput_needed, err; struct msghdr msg_sys; struct socket *sock; - if (flags & MSG_CMSG_COMPAT) - return -EINVAL; - sock = sockfd_lookup_light(fd, &err, &fput_needed); if (!sock) goto out; - err = __sys_sendmsg(sock, msg, &msg_sys, flags, NULL); + err = ___sys_sendmsg(sock, msg, &msg_sys, flags, NULL); fput_light(sock->file, fput_needed); out: return err; } +SYSCALL_DEFINE3(sendmsg, int, fd, struct msghdr __user *, msg, unsigned int, flags) +{ + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; + return __sys_sendmsg(fd, msg, flags); +} + /* * Linux sendmmsg interface */ @@ -2121,15 +2125,16 @@ int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen, while (datagrams < vlen) { if (MSG_CMSG_COMPAT & flags) { - err = __sys_sendmsg(sock, (struct msghdr __user *)compat_entry, - &msg_sys, flags, &used_address); + err = ___sys_sendmsg(sock, (struct msghdr __user *)compat_entry, + &msg_sys, flags, &used_address); if (err < 0) break; err = __put_user(err, &compat_entry->msg_len); ++compat_entry; } else { - err = __sys_sendmsg(sock, (struct msghdr __user *)entry, - &msg_sys, flags, &used_address); + err = ___sys_sendmsg(sock, + (struct msghdr __user *)entry, + &msg_sys, flags, &used_address); if (err < 0) break; err = put_user(err, &entry->msg_len); @@ -2158,7 +2163,7 @@ SYSCALL_DEFINE4(sendmmsg, int, fd, struct mmsghdr __user *, mmsg, return __sys_sendmmsg(fd, mmsg, vlen, flags); } -static int __sys_recvmsg(struct socket *sock, struct msghdr __user *msg, +static int ___sys_recvmsg(struct socket *sock, struct msghdr __user *msg, struct msghdr *msg_sys, unsigned int flags, int nosec) { struct compat_msghdr __user *msg_compat = @@ -2250,27 +2255,31 @@ out: * BSD recvmsg interface */ -SYSCALL_DEFINE3(recvmsg, int, fd, struct msghdr __user *, msg, - unsigned int, flags) +long __sys_recvmsg(int fd, struct msghdr __user *msg, unsigned flags) { int fput_needed, err; struct msghdr msg_sys; struct socket *sock; - if (flags & MSG_CMSG_COMPAT) - return -EINVAL; - sock = sockfd_lookup_light(fd, &err, &fput_needed); if (!sock) goto out; - err = __sys_recvmsg(sock, msg, &msg_sys, flags, 0); + err = ___sys_recvmsg(sock, msg, &msg_sys, flags, 0); fput_light(sock->file, fput_needed); out: return err; } +SYSCALL_DEFINE3(recvmsg, int, fd, struct msghdr __user *, msg, + unsigned int, flags) +{ + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; + return __sys_recvmsg(fd, msg, flags); +} + /* * Linux recvmmsg interface */ @@ -2308,17 +2317,18 @@ int __sys_recvmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen, * No need to ask LSM for more than the first datagram. */ if (MSG_CMSG_COMPAT & flags) { - err = __sys_recvmsg(sock, (struct msghdr __user *)compat_entry, - &msg_sys, flags & ~MSG_WAITFORONE, - datagrams); + err = ___sys_recvmsg(sock, (struct msghdr __user *)compat_entry, + &msg_sys, flags & ~MSG_WAITFORONE, + datagrams); if (err < 0) break; err = __put_user(err, &compat_entry->msg_len); ++compat_entry; } else { - err = __sys_recvmsg(sock, (struct msghdr __user *)entry, - &msg_sys, flags & ~MSG_WAITFORONE, - datagrams); + err = ___sys_recvmsg(sock, + (struct msghdr __user *)entry, + &msg_sys, flags & ~MSG_WAITFORONE, + datagrams); if (err < 0) break; err = put_user(err, &entry->msg_len); @@ -2505,31 +2515,15 @@ SYSCALL_DEFINE2(socketcall, int, call, unsigned long __user *, args) (int __user *)a[4]); break; case SYS_SENDMSG: - if (a[2] & MSG_CMSG_COMPAT) { - err = -EINVAL; - break; - } err = sys_sendmsg(a0, (struct msghdr __user *)a1, a[2]); break; case SYS_SENDMMSG: - if (a[3] & MSG_CMSG_COMPAT) { - err = -EINVAL; - break; - } err = sys_sendmmsg(a0, (struct mmsghdr __user *)a1, a[2], a[3]); break; case SYS_RECVMSG: - if (a[2] & MSG_CMSG_COMPAT) { - err = -EINVAL; - break; - } err = sys_recvmsg(a0, (struct msghdr __user *)a1, a[2]); break; case SYS_RECVMMSG: - if (a[3] & MSG_CMSG_COMPAT) { - err = -EINVAL; - break; - } err = sys_recvmmsg(a0, (struct mmsghdr __user *)a1, a[2], a[3], (struct timespec __user *)a[4]); break; -- cgit v0.10.2 From 5f1f3d5088316f827591764aa6a5e7161eb514bd Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 6 Jun 2013 11:21:23 +0200 Subject: arm: mvebu: armada-xp-{gp,openblocks-ax3-4}: specify PCIe range The ranges DT entry needed by the PCIe controller is defined at the SoC .dtsi level. However, some boards have a NOR flash, and to support it, they need to override the SoC-level ranges property to add an additional range. Since PCIe and NOR support came separately, some boards were not properly changed to include the PCIe range in their ranges property at the .dts level. This commit fixes those platforms. Signed-off-by: Thomas Petazzoni Signed-off-by: Jason Cooper diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 3ee63d1..76db557 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -39,8 +39,9 @@ }; soc { - ranges = <0 0 0xd0000000 0x100000 - 0xf0000000 0 0xf0000000 0x1000000>; + ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */ + 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */ + 0xf0000000 0 0xf0000000 0x1000000 /* Device Bus, NOR 16MiB */>; internal-regs { serial@12000 { diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 46b7850..fdea75c 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -27,8 +27,9 @@ }; soc { - ranges = <0 0 0xd0000000 0x100000 - 0xf0000000 0 0xf0000000 0x8000000>; + ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */ + 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */ + 0xf0000000 0 0xf0000000 0x8000000 /* Device Bus, NOR 128MiB */>; internal-regs { serial@12000 { -- cgit v0.10.2 From 72b5322f11ff0abf6a52b3007486656578d2c982 Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Mon, 3 Jun 2013 17:17:15 +0800 Subject: clk: remove notifier from list before freeing it MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The @cn is stay in @clk_notifier_list after it is freed, it cause memory corruption. Example, if @clk is registered(first), unregistered(first), registered(second), unregistered(second). The freed @cn will be used when @clk is registered(second), and the bug will be happened when @clk is unregistered(second): [ 517.040000] clk_notif_dbg clk_notif_dbg.1: clk_notifier_unregister() [ 517.040000] Unable to handle kernel paging request at virtual address 00df3008 [ 517.050000] pgd = ed858000 [ 517.050000] [00df3008] *pgd=00000000 [ 517.060000] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 517.060000] Modules linked in: clk_notif_dbg(O-) [last unloaded: clk_notif_dbg] [ 517.060000] CPU: 1 PID: 499 Comm: modprobe Tainted: G O 3.10.0-rc3-00119-ga93cb29-dirty #85 [ 517.060000] task: ee1e0180 ti: ee3e6000 task.ti: ee3e6000 [ 517.060000] PC is at srcu_readers_seq_idx+0x48/0x84 [ 517.060000] LR is at srcu_readers_seq_idx+0x60/0x84 [ 517.060000] pc : [] lr : [] psr: 80070013 [ 517.060000] sp : ee3e7d48 ip : 00000000 fp : ee3e7d6c [ 517.060000] r10: 00000000 r9 : ee3e6000 r8 : 00000000 [ 517.060000] r7 : ed84fe4c r6 : c068ec90 r5 : c068e430 r4 : 00000000 [ 517.060000] r3 : 00df3000 r2 : 00000000 r1 : 00000002 r0 : 00000000 [ 517.060000] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 517.060000] Control: 18c5387d Table: 2d85804a DAC: 00000015 [ 517.060000] Process modprobe (pid: 499, stack limit = 0xee3e6238) [ 517.060000] Stack: (0xee3e7d48 to 0xee3e8000) .... [ 517.060000] [] (srcu_readers_seq_idx+0x48/0x84) from [] (try_check_zero+0x34/0xfc) [ 517.060000] [] (try_check_zero+0x34/0xfc) from [] (srcu_advance_batches+0x58/0x114) [ 517.060000] [] (srcu_advance_batches+0x58/0x114) from [] (__synchronize_srcu+0x114/0x1ac) [ 517.060000] [] (__synchronize_srcu+0x114/0x1ac) from [] (synchronize_srcu+0x2c/0x34) [ 517.060000] [] (synchronize_srcu+0x2c/0x34) from [] (srcu_notifier_chain_unregister+0x68/0x74) [ 517.060000] [] (srcu_notifier_chain_unregister+0x68/0x74) from [] (clk_notifier_unregister+0x7c/0xc0) [ 517.060000] [] (clk_notifier_unregister+0x7c/0xc0) from [] (clk_notif_dbg_remove+0x34/0x9c [clk_notif_dbg]) [ 517.060000] [] (clk_notif_dbg_remove+0x34/0x9c [clk_notif_dbg]) from [] (platform_drv_remove+0x24/0x28) [ 517.060000] [] (platform_drv_remove+0x24/0x28) from [] (__device_release_driver+0x8c/0xd4) [ 517.060000] [] (__device_release_driver+0x8c/0xd4) from [] (driver_detach+0x9c/0xc4) [ 517.060000] [] (driver_detach+0x9c/0xc4) from [] (bus_remove_driver+0xcc/0xfc) [ 517.060000] [] (bus_remove_driver+0xcc/0xfc) from [] (driver_unregister+0x54/0x78) [ 517.060000] [] (driver_unregister+0x54/0x78) from [] (platform_driver_unregister+0x1c/0x20) [ 517.060000] [] (platform_driver_unregister+0x1c/0x20) from [] (clk_notif_dbg_driver_exit+0x14/0x1c [clk_notif_dbg]) [ 517.060000] [] (clk_notif_dbg_driver_exit+0x14/0x1c [clk_notif_dbg]) from [] (SyS_delete_module+0x200/0x28c) [ 517.060000] [] (SyS_delete_module+0x200/0x28c) from [] (ret_fast_syscall+0x0/0x48) [ 517.060000] Code: e5973004 e7911102 e0833001 e2881002 (e7933101) Cc: stable@kernel.org Reported-by: Sören Brinkmann Signed-off-by: Lai Jiangshan Tested-by: Sören Brinkmann Signed-off-by: Mike Turquette [mturquette@linaro.org: shortened $SUBJECT] diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 934cfd1..1144e8c 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -1955,6 +1955,7 @@ int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb) /* XXX the notifier code should handle this better */ if (!cn->notifier_head.head) { srcu_cleanup_notifier_head(&cn->notifier_head); + list_del(&cn->node); kfree(cn); } -- cgit v0.10.2 From 7cd8407d53ef5fb0280fcbe34f42311472f90feb Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 5 Jun 2013 14:01:19 +0200 Subject: ACPI / PM: Do not execute _PS0 for devices without _PSC during initialization Commit b378549 (ACPI / PM: Do not power manage devices in unknown initial states) added code to force devices without _PSC, but having _PS0 defined in the ACPI namespace, into ACPI power state D0 by executing _PS0 for them. That turned out to break Toshiba P870-303, however, so revert that code. References: https://bugzilla.kernel.org/show_bug.cgi?id=58201 Reported-and-tested-by: Jerome Cantenot Tracked-down-by: Lan Tianyu Cc: 3.9+ Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c index bc493aa..318fa32 100644 --- a/drivers/acpi/device_pm.c +++ b/drivers/acpi/device_pm.c @@ -278,11 +278,13 @@ int acpi_bus_init_power(struct acpi_device *device) if (result) return result; } else if (state == ACPI_STATE_UNKNOWN) { - /* No power resources and missing _PSC? Try to force D0. */ + /* + * No power resources and missing _PSC? Cross fingers and make + * it D0 in hope that this is what the BIOS put the device into. + * [We tried to force D0 here by executing _PS0, but that broke + * Toshiba P870-303 in a nasty way.] + */ state = ACPI_STATE_D0; - result = acpi_dev_pm_explicit_set(device, state); - if (result) - return result; } device->power.state = state; return 0; -- cgit v0.10.2 From 4616274d3382fa7698536d61b351e63cf0ce27f0 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 5 Jun 2013 19:36:11 +0100 Subject: ASoC: dapm: Treat DAI widgets like AIF widgets for power Even though they are virtual widgets DAI widgets still get counted for the DAPM context power management so we can't just use the active state to check if they should be powered as they may not be part of a complete path. Instead split them into input and output widgets and do the same power checks as we perform on AIFs. Reported-by: Stephen Warren Tested-by: Stephen Warren Signed-off-by: Mark Brown diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index d460902..385c632 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -450,7 +450,8 @@ enum snd_soc_dapm_type { snd_soc_dapm_aif_in, /* audio interface input */ snd_soc_dapm_aif_out, /* audio interface output */ snd_soc_dapm_siggen, /* signal generator */ - snd_soc_dapm_dai, /* link to DAI structure */ + snd_soc_dapm_dai_in, /* link to DAI structure */ + snd_soc_dapm_dai_out, snd_soc_dapm_dai_link, /* link between two DAI structures */ }; diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index a80c883..c7051c4 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -55,7 +55,8 @@ static int dapm_up_seq[] = { [snd_soc_dapm_clock_supply] = 1, [snd_soc_dapm_micbias] = 2, [snd_soc_dapm_dai_link] = 2, - [snd_soc_dapm_dai] = 3, + [snd_soc_dapm_dai_in] = 3, + [snd_soc_dapm_dai_out] = 3, [snd_soc_dapm_aif_in] = 3, [snd_soc_dapm_aif_out] = 3, [snd_soc_dapm_mic] = 4, @@ -92,7 +93,8 @@ static int dapm_down_seq[] = { [snd_soc_dapm_value_mux] = 9, [snd_soc_dapm_aif_in] = 10, [snd_soc_dapm_aif_out] = 10, - [snd_soc_dapm_dai] = 10, + [snd_soc_dapm_dai_in] = 10, + [snd_soc_dapm_dai_out] = 10, [snd_soc_dapm_dai_link] = 11, [snd_soc_dapm_clock_supply] = 12, [snd_soc_dapm_regulator_supply] = 12, @@ -419,7 +421,8 @@ static void dapm_set_path_status(struct snd_soc_dapm_widget *w, case snd_soc_dapm_clock_supply: case snd_soc_dapm_aif_in: case snd_soc_dapm_aif_out: - case snd_soc_dapm_dai: + case snd_soc_dapm_dai_in: + case snd_soc_dapm_dai_out: case snd_soc_dapm_hp: case snd_soc_dapm_mic: case snd_soc_dapm_spk: @@ -820,7 +823,7 @@ static int is_connected_output_ep(struct snd_soc_dapm_widget *widget, switch (widget->id) { case snd_soc_dapm_adc: case snd_soc_dapm_aif_out: - case snd_soc_dapm_dai: + case snd_soc_dapm_dai_out: if (widget->active) { widget->outputs = snd_soc_dapm_suspend_check(widget); return widget->outputs; @@ -916,7 +919,7 @@ static int is_connected_input_ep(struct snd_soc_dapm_widget *widget, switch (widget->id) { case snd_soc_dapm_dac: case snd_soc_dapm_aif_in: - case snd_soc_dapm_dai: + case snd_soc_dapm_dai_in: if (widget->active) { widget->inputs = snd_soc_dapm_suspend_check(widget); return widget->inputs; @@ -1135,16 +1138,6 @@ static int dapm_generic_check_power(struct snd_soc_dapm_widget *w) return out != 0 && in != 0; } -static int dapm_dai_check_power(struct snd_soc_dapm_widget *w) -{ - DAPM_UPDATE_STAT(w, power_checks); - - if (w->active) - return w->active; - - return dapm_generic_check_power(w); -} - /* Check to see if an ADC has power */ static int dapm_adc_check_power(struct snd_soc_dapm_widget *w) { @@ -2318,7 +2311,8 @@ static int snd_soc_dapm_add_route(struct snd_soc_dapm_context *dapm, case snd_soc_dapm_clock_supply: case snd_soc_dapm_aif_in: case snd_soc_dapm_aif_out: - case snd_soc_dapm_dai: + case snd_soc_dapm_dai_in: + case snd_soc_dapm_dai_out: case snd_soc_dapm_dai_link: list_add(&path->list, &dapm->card->paths); list_add(&path->list_sink, &wsink->sources); @@ -3129,10 +3123,12 @@ snd_soc_dapm_new_control(struct snd_soc_dapm_context *dapm, break; case snd_soc_dapm_adc: case snd_soc_dapm_aif_out: + case snd_soc_dapm_dai_out: w->power_check = dapm_adc_check_power; break; case snd_soc_dapm_dac: case snd_soc_dapm_aif_in: + case snd_soc_dapm_dai_in: w->power_check = dapm_dac_check_power; break; case snd_soc_dapm_pga: @@ -3152,9 +3148,6 @@ snd_soc_dapm_new_control(struct snd_soc_dapm_context *dapm, case snd_soc_dapm_clock_supply: w->power_check = dapm_supply_check_power; break; - case snd_soc_dapm_dai: - w->power_check = dapm_dai_check_power; - break; default: w->power_check = dapm_always_on_check_power; break; @@ -3375,7 +3368,7 @@ int snd_soc_dapm_new_dai_widgets(struct snd_soc_dapm_context *dapm, template.reg = SND_SOC_NOPM; if (dai->driver->playback.stream_name) { - template.id = snd_soc_dapm_dai; + template.id = snd_soc_dapm_dai_in; template.name = dai->driver->playback.stream_name; template.sname = dai->driver->playback.stream_name; @@ -3393,7 +3386,7 @@ int snd_soc_dapm_new_dai_widgets(struct snd_soc_dapm_context *dapm, } if (dai->driver->capture.stream_name) { - template.id = snd_soc_dapm_dai; + template.id = snd_soc_dapm_dai_out; template.name = dai->driver->capture.stream_name; template.sname = dai->driver->capture.stream_name; @@ -3423,8 +3416,13 @@ int snd_soc_dapm_link_dai_widgets(struct snd_soc_card *card) /* For each DAI widget... */ list_for_each_entry(dai_w, &card->widgets, list) { - if (dai_w->id != snd_soc_dapm_dai) + switch (dai_w->id) { + case snd_soc_dapm_dai_in: + case snd_soc_dapm_dai_out: + break; + default: continue; + } dai = dai_w->priv; @@ -3433,8 +3431,13 @@ int snd_soc_dapm_link_dai_widgets(struct snd_soc_card *card) if (w->dapm != dai_w->dapm) continue; - if (w->id == snd_soc_dapm_dai) + switch (w->id) { + case snd_soc_dapm_dai_in: + case snd_soc_dapm_dai_out: continue; + default: + break; + } if (!w->sname) continue; diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index a9fddf0..ccb6be4 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -928,8 +928,13 @@ static int dpcm_add_paths(struct snd_soc_pcm_runtime *fe, int stream, /* Create any new FE <--> BE connections */ for (i = 0; i < list->num_widgets; i++) { - if (list->widgets[i]->id != snd_soc_dapm_dai) + switch (list->widgets[i]->id) { + case snd_soc_dapm_dai_in: + case snd_soc_dapm_dai_out: + break; + default: continue; + } /* is there a valid BE rtd for this widget */ be = dpcm_get_be(card, list->widgets[i], stream); -- cgit v0.10.2 From 698b8223631472bf982ed570b0812faa61955683 Mon Sep 17 00:00:00 2001 From: Dave Chiluk Date: Tue, 28 May 2013 16:06:08 -0500 Subject: ncpfs: fix rmdir returns Device or resource busy 1d2ef5901483004d74947bbf78d5146c24038fe7 caused a regression in ncpfs such that directories could no longer be removed. This was because ncp_rmdir checked to see if a dentry could be unhashed before allowing it to be removed. Since 1d2ef5901483004d74947bbf78d5146c24038fe7 introduced a change that incremented dentry->d_count causing it to always be greater than 1 unhash would always fail. Thus causing the error path in ncp_rmdir to always be taken. Removing this error path is safe as unhashing is still accomplished by calls to dput from vfs_rmdir. Signed-off-by: Dave Chiluk Signed-off-by: Petr Vandrovec Signed-off-by: Al Viro diff --git a/fs/ncpfs/dir.c b/fs/ncpfs/dir.c index 8163260..6792ce1 100644 --- a/fs/ncpfs/dir.c +++ b/fs/ncpfs/dir.c @@ -1029,15 +1029,6 @@ static int ncp_rmdir(struct inode *dir, struct dentry *dentry) DPRINTK("ncp_rmdir: removing %s/%s\n", dentry->d_parent->d_name.name, dentry->d_name.name); - /* - * fail with EBUSY if there are still references to this - * directory. - */ - dentry_unhash(dentry); - error = -EBUSY; - if (!d_unhashed(dentry)) - goto out; - len = sizeof(__name); error = ncp_io2vol(server, __name, &len, dentry->d_name.name, dentry->d_name.len, !ncp_preserve_case(dir)); -- cgit v0.10.2 From 7b8dfe289fdde0066be343a3e0271ad6d7b6dbcf Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Fri, 7 Jun 2013 18:42:00 +0200 Subject: netfilter: nfnetlink_queue: fix missing HW protocol Locally generated IPv4 and IPv6 traffic gets skb->protocol unset, thus passing zero. ip6tables -I OUTPUT -j NFQUEUE libmnl/examples/netfilter# ./nf-queue 0 & ping6 ::1 packet received (id=1 hw=0x0000 hook=3) ^^^^^^ Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/nfnetlink_queue_core.c b/net/netfilter/nfnetlink_queue_core.c index 4e27fa0..5352b2d 100644 --- a/net/netfilter/nfnetlink_queue_core.c +++ b/net/netfilter/nfnetlink_queue_core.c @@ -637,9 +637,6 @@ nfqnl_enqueue_packet(struct nf_queue_entry *entry, unsigned int queuenum) if (queue->copy_mode == NFQNL_COPY_NONE) return -EINVAL; - if ((queue->flags & NFQA_CFG_F_GSO) || !skb_is_gso(entry->skb)) - return __nfqnl_enqueue_packet(net, queue, entry); - skb = entry->skb; switch (entry->pf) { @@ -651,6 +648,9 @@ nfqnl_enqueue_packet(struct nf_queue_entry *entry, unsigned int queuenum) break; } + if ((queue->flags & NFQA_CFG_F_GSO) || !skb_is_gso(skb)) + return __nfqnl_enqueue_packet(net, queue, entry); + nf_bridge_adjust_skb_data(skb); segs = skb_gso_segment(skb, 0); /* Does not use PTR_ERR to limit the number of error codes that can be -- cgit v0.10.2 From 2894770ec17ff732f911c8495ae0504f06a5dad5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andreas=20Irest=C3=A5l?= Date: Wed, 5 Jun 2013 08:49:47 +0200 Subject: ASoC: tlv320aic3x: Remove deadlock from snd_soc_dapm_put_volsw_aic3x() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When calling snd_soc_dapm_sync(), it eventually tries to lock the same mutex already locked in snd_soc_dapm_put_volsw_aic3x() and a deadlock occurs. By moving the mutex unlock to just before snd_soc_dapm_sync(), this deadlock is prevented. This problem was introduced in Linux 3.5 Signed-off-by: Andreas Irestål Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index 65d09d6..1514bf8 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -187,14 +187,14 @@ static int snd_soc_dapm_put_volsw_aic3x(struct snd_kcontrol *kcontrol, break; } - - if (found) - snd_soc_dapm_sync(widget->dapm); } - ret = snd_soc_update_bits(widget->codec, reg, val_mask, val); - mutex_unlock(&widget->codec->mutex); + + if (found) + snd_soc_dapm_sync(widget->dapm); + + ret = snd_soc_update_bits_locked(widget->codec, reg, val_mask, val); return ret; } -- cgit v0.10.2 From 591bfcfc334a003ba31c0deff03b22e73349939b Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 5 Jun 2013 14:09:30 -0700 Subject: hwmon: (adm1021) Strengthen chip detection for ADM1021, LM84 and MAX1617 On a system with both MAX1617 and JC42 sensors, JC42 sensors can be misdetected as LM84. Strengthen detection sufficiently enough to avoid this misdetection. Also improve detection for ADM1021. Modeled after chip detection code in sensors-detect command. Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck Tested-by: Jean Delvare Acked-by: Jean Delvare diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c index 7e76922..f920619 100644 --- a/drivers/hwmon/adm1021.c +++ b/drivers/hwmon/adm1021.c @@ -331,26 +331,68 @@ static int adm1021_detect(struct i2c_client *client, man_id = i2c_smbus_read_byte_data(client, ADM1021_REG_MAN_ID); dev_id = i2c_smbus_read_byte_data(client, ADM1021_REG_DEV_ID); + if (man_id < 0 || dev_id < 0) + return -ENODEV; + if (man_id == 0x4d && dev_id == 0x01) type_name = "max1617a"; else if (man_id == 0x41) { if ((dev_id & 0xF0) == 0x30) type_name = "adm1023"; - else + else if ((dev_id & 0xF0) == 0x00) type_name = "adm1021"; + else + return -ENODEV; } else if (man_id == 0x49) type_name = "thmc10"; else if (man_id == 0x23) type_name = "gl523sm"; else if (man_id == 0x54) type_name = "mc1066"; - /* LM84 Mfr ID in a different place, and it has more unused bits */ - else if (conv_rate == 0x00 - && (config & 0x7F) == 0x00 - && (status & 0xAB) == 0x00) - type_name = "lm84"; - else - type_name = "max1617"; + else { + int lte, rte, lhi, rhi, llo, rlo; + + /* extra checks for LM84 and MAX1617 to avoid misdetections */ + + llo = i2c_smbus_read_byte_data(client, ADM1021_REG_THYST_R(0)); + rlo = i2c_smbus_read_byte_data(client, ADM1021_REG_THYST_R(1)); + + /* fail if any of the additional register reads failed */ + if (llo < 0 || rlo < 0) + return -ENODEV; + + lte = i2c_smbus_read_byte_data(client, ADM1021_REG_TEMP(0)); + rte = i2c_smbus_read_byte_data(client, ADM1021_REG_TEMP(1)); + lhi = i2c_smbus_read_byte_data(client, ADM1021_REG_TOS_R(0)); + rhi = i2c_smbus_read_byte_data(client, ADM1021_REG_TOS_R(1)); + + /* + * Fail for negative temperatures and negative high limits. + * This check also catches read errors on the tested registers. + */ + if ((s8)lte < 0 || (s8)rte < 0 || (s8)lhi < 0 || (s8)rhi < 0) + return -ENODEV; + + /* fail if all registers hold the same value */ + if (lte == rte && lte == lhi && lte == rhi && lte == llo + && lte == rlo) + return -ENODEV; + + /* + * LM84 Mfr ID is in a different place, + * and it has more unused bits. + */ + if (conv_rate == 0x00 + && (config & 0x7F) == 0x00 + && (status & 0xAB) == 0x00) { + type_name = "lm84"; + } else { + /* fail if low limits are larger than high limits */ + if ((s8)llo > lhi || (s8)rlo > rhi) + return -ENODEV; + type_name = "max1617"; + } + } pr_debug("Detected chip %s at adapter %d, address 0x%02x.\n", type_name, i2c_adapter_id(adapter), client->addr); -- cgit v0.10.2 From bcc567e3115055a9cc256183d72864f01286be22 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 23 May 2013 14:29:53 +0300 Subject: dmatest: do not allow to interrupt ongoing tests When user interrupts ongoing transfers the dmatest may end up with console lockup, oops, or data mismatch. This patch prevents user to abort any ongoing test. Documentation is updated accordingly. Signed-off-by: Andy Shevchenko Reported-by: Will Deacon Tested-by: Will Deacon Signed-off-by: Vinod Koul diff --git a/Documentation/dmatest.txt b/Documentation/dmatest.txt index 279ac0a..132a094 100644 --- a/Documentation/dmatest.txt +++ b/Documentation/dmatest.txt @@ -34,7 +34,7 @@ command: After a while you will start to get messages about current status or error like in the original code. -Note that running a new test will stop any in progress test. +Note that running a new test will not stop any in progress test. The following command should return actual state of the test. % cat /sys/kernel/debug/dmatest/run @@ -52,8 +52,8 @@ To wait for test done the user may perform a busy loop that checks the state. The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be -interrupted or re-run with same or different parameters. For the details see -the above section "Part 2 - When dmatest is built as a module..." +re-run with the same or different parameters. For the details see the above +section "Part 2 - When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index d8ce4ec..e88ded2 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -716,8 +716,7 @@ static int dmatest_func(void *data) } dma_async_issue_pending(chan); - wait_event_freezable_timeout(done_wait, - done.done || kthread_should_stop(), + wait_event_freezable_timeout(done_wait, done.done, msecs_to_jiffies(params->timeout)); status = dma_async_is_tx_complete(chan, cookie, NULL, NULL); @@ -997,7 +996,6 @@ static void stop_threaded_test(struct dmatest_info *info) static int __restart_threaded_test(struct dmatest_info *info, bool run) { struct dmatest_params *params = &info->params; - int ret; /* Stop any running test first */ __stop_threaded_test(info); @@ -1012,13 +1010,23 @@ static int __restart_threaded_test(struct dmatest_info *info, bool run) memcpy(params, &info->dbgfs_params, sizeof(*params)); /* Run test with new parameters */ - ret = __run_threaded_test(info); - if (ret) { - __stop_threaded_test(info); - pr_err("dmatest: Can't run test\n"); + return __run_threaded_test(info); +} + +static bool __is_threaded_test_run(struct dmatest_info *info) +{ + struct dmatest_chan *dtc; + + list_for_each_entry(dtc, &info->channels, node) { + struct dmatest_thread *thread; + + list_for_each_entry(thread, &dtc->threads, node) { + if (!thread->done) + return true; + } } - return ret; + return false; } static ssize_t dtf_write_string(void *to, size_t available, loff_t *ppos, @@ -1091,22 +1099,10 @@ static ssize_t dtf_read_run(struct file *file, char __user *user_buf, { struct dmatest_info *info = file->private_data; char buf[3]; - struct dmatest_chan *dtc; - bool alive = false; mutex_lock(&info->lock); - list_for_each_entry(dtc, &info->channels, node) { - struct dmatest_thread *thread; - - list_for_each_entry(thread, &dtc->threads, node) { - if (!thread->done) { - alive = true; - break; - } - } - } - if (alive) { + if (__is_threaded_test_run(info)) { buf[0] = 'Y'; } else { __stop_threaded_test(info); @@ -1132,7 +1128,12 @@ static ssize_t dtf_write_run(struct file *file, const char __user *user_buf, if (strtobool(buf, &bv) == 0) { mutex_lock(&info->lock); - ret = __restart_threaded_test(info, bv); + + if (__is_threaded_test_run(info)) + ret = -EBUSY; + else + ret = __restart_threaded_test(info, bv); + mutex_unlock(&info->lock); } -- cgit v0.10.2 From 40edeff6e1c6f9a6f16536ae3375e3af9d648449 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 2 Jun 2013 11:15:55 +0000 Subject: net_sched: qdisc_get_rtab() must check data[] array qdisc_get_rtab() should check not only the keys in struct tc_ratespec, but also the full data[] array. "tc ... linklayer atm " only perturbs values in the 256 slots array. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c index 2b935e7..281c1bd 100644 --- a/net/sched/sch_api.c +++ b/net/sched/sch_api.c @@ -291,17 +291,18 @@ struct qdisc_rate_table *qdisc_get_rtab(struct tc_ratespec *r, struct nlattr *ta { struct qdisc_rate_table *rtab; + if (tab == NULL || r->rate == 0 || r->cell_log == 0 || + nla_len(tab) != TC_RTAB_SIZE) + return NULL; + for (rtab = qdisc_rtab_list; rtab; rtab = rtab->next) { - if (memcmp(&rtab->rate, r, sizeof(struct tc_ratespec)) == 0) { + if (!memcmp(&rtab->rate, r, sizeof(struct tc_ratespec)) && + !memcmp(&rtab->data, nla_data(tab), 1024)) { rtab->refcnt++; return rtab; } } - if (tab == NULL || r->rate == 0 || r->cell_log == 0 || - nla_len(tab) != TC_RTAB_SIZE) - return NULL; - rtab = kmalloc(sizeof(*rtab), GFP_KERNEL); if (rtab) { rtab->rate = *r; -- cgit v0.10.2 From 437d8ac510b90610da814ae25a7b79aaf3b4910f Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Tue, 4 Jun 2013 09:49:10 +0530 Subject: ARM: EXYNOS: uncompress - print debug messages if DEBUG_LL is defined Printing low-level debug messages make an assumption that the specified UART port has been preconfigured by the bootloader. Incorrectly specified UART port results in system getting stalled while printing the message "Uncompressing Linux... done, booting the kernel" This UART port number is specified through S3C_LOWLEVEL_UART_PORT. Since the UART port might different for different board, it is not possible to specify it correctly for every board that use a common defconfig file. Calling this print subroutine only when DEBUG_LL fixes the problem. By disabling DEBUG_LL in default config file, we would be able to boot multiple boards with different default UART ports. With this current approach, we miss the print "Uncompressing Linux... done, booting the kernel." when DEBUG_LL is not defined. Signed-off-by: Tushar Behera Signed-off-by: Olof Johansson diff --git a/arch/arm/plat-samsung/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h index 438b248..02b66d7 100644 --- a/arch/arm/plat-samsung/include/plat/uncompress.h +++ b/arch/arm/plat-samsung/include/plat/uncompress.h @@ -66,6 +66,9 @@ uart_rd(unsigned int reg) static void putc(int ch) { + if (!config_enabled(CONFIG_DEBUG_LL)) + return; + if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) { int level; @@ -118,7 +121,12 @@ static void arch_decomp_error(const char *x) #ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO static inline void arch_enable_uart_fifo(void) { - u32 fifocon = uart_rd(S3C2410_UFCON); + u32 fifocon; + + if (!config_enabled(CONFIG_DEBUG_LL)) + return; + + fifocon = uart_rd(S3C2410_UFCON); if (!(fifocon & S3C2410_UFCON_FIFOMODE)) { fifocon |= S3C2410_UFCON_RESETBOTH; -- cgit v0.10.2 From 9c1fcdccc7ce5611ec1edf45dbbe51b10e333bd3 Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Wed, 5 Jun 2013 13:56:33 -0700 Subject: ARM: exynos: add debug_ll_io_init() call in exynos_init_io() If the early MMU mapping of the UART happens to get booted out of the TLB between the start of paging_init() and when we finally re-add the UART at the very end of s3c_init_cpu(), we'll get a hang at bootup if we've got early_printk enabled. Avoid this hang by calling debug_ll_io_init() early. Without this patch, you can reliably reproduce a hang when early printk is enabled by adding flush_tlb_all() at the start of exynos_init_io(). After this patch the hang goes away. Signed-off-by: Doug Anderson Acked-by: Kukjin Kim Signed-off-by: Olof Johansson diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 027c9e7..f7e504b 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -386,6 +386,8 @@ int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, void __init exynos_init_io(struct map_desc *mach_desc, int size) { + debug_ll_io_init(); + #ifdef CONFIG_OF if (initial_boot_params) of_scan_flat_dt(exynos_fdt_map_chipid, NULL); -- cgit v0.10.2 From ea7f665612fcc73da6b7698f468cd5fc03a30d47 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 8 Jun 2013 02:55:07 +0200 Subject: Revert "ACPI / scan: do not match drivers against objects having scan handlers" Commit 9f29ab11ddbf ("ACPI / scan: do not match drivers against objects having scan handlers") introduced a boot regression on Tony's ia64 HP rx2600. Tony says: "It panics with the message: Kernel panic - not syncing: Unable to find SBA IOMMU: Try a generic or DIG kernel [...] my problem comes from arch/ia64/hp/common/sba_iommu.c where the code in sba_init() says: acpi_bus_register_driver(&acpi_sba_ioc_driver); if (!ioc_list) { but because of this change we never managed to call ioc_init() so ioc_list doesn't get set up, and we die." Revert it to avoid this breakage and we'll fix the problem it attempted to address later. Reported-by: Tony Luck Cc: 3.9+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Linus Torvalds diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 90c5759..44225cb 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -740,10 +740,6 @@ static int acpi_bus_match(struct device *dev, struct device_driver *drv) struct acpi_device *acpi_dev = to_acpi_device(dev); struct acpi_driver *acpi_drv = to_acpi_driver(drv); - /* Skip ACPI device objects with scan handlers attached. */ - if (acpi_dev->handler) - return 0; - return acpi_dev->flags.match_driver && !acpi_match_device_ids(acpi_dev, acpi_drv->ids); } -- cgit v0.10.2 From 7b5ff90ed081787ec0765ceb4fe5ccf5677493a6 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Thu, 6 Jun 2013 10:29:40 -0400 Subject: Btrfs: don't delete fs_roots until after we cleanup the transaction We get a use after free if we had a transaction to cleanup since there could be delayed inodes which refer to their respective fs_root. Thanks Reported-by: David Sterba Signed-off-by: Josef Bacik Signed-off-by: Chris Mason diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index e7b3cb5..bdaa092 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -2859,8 +2859,8 @@ fail_qgroup: btrfs_free_qgroup_config(fs_info); fail_trans_kthread: kthread_stop(fs_info->transaction_kthread); - del_fs_roots(fs_info); btrfs_cleanup_transaction(fs_info->tree_root); + del_fs_roots(fs_info); fail_cleaner: kthread_stop(fs_info->cleaner_kthread); -- cgit v0.10.2 From 6379ef9fb2482a92b5fe09f927d6ce1f989c0c6d Mon Sep 17 00:00:00 2001 From: Naohiro Aota Date: Thu, 6 Jun 2013 09:56:34 +0000 Subject: btrfs: Drop inode if inode root is NULL There is a path where btrfs_drop_inode() is called with its inode's root is NULL: In btrfs_new_inode(), when btrfs_set_inode_index() fails, iput() is called. We should handle this case before taking look at the root->root_item. Signed-off-by: Naohiro Aota Reviewed-by: Miao Xie Signed-off-by: Josef Bacik Signed-off-by: Chris Mason diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 23c596c..c931a4d 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -8011,6 +8011,9 @@ int btrfs_drop_inode(struct inode *inode) { struct btrfs_root *root = BTRFS_I(inode)->root; + if (root == NULL) + return 1; + /* the snap/subvol tree is on deleting */ if (btrfs_root_refs(&root->root_item) == 0 && root != root->fs_info->tree_root) -- cgit v0.10.2 From a9995eece39a0630ebbfc1ab38570bce6c8a8f5b Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 31 May 2013 13:04:36 -0400 Subject: Btrfs: init relocate extent_io_tree with a mapping Dave reported a NULL pointer deref. This is caused because he thought he'd be smart and add sanity checks to the extent_io bit operations, but he didn't expect a tree to have a NULL mapping. To fix this we just need to init the relocation's processed_blocks with the btree_inode->i_mapping. Thanks, Reported-by: David Sterba Signed-off-by: Josef Bacik Signed-off-by: Chris Mason diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index 395b820..4febca4 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -4082,7 +4082,7 @@ out: return inode; } -static struct reloc_control *alloc_reloc_control(void) +static struct reloc_control *alloc_reloc_control(struct btrfs_fs_info *fs_info) { struct reloc_control *rc; @@ -4093,7 +4093,8 @@ static struct reloc_control *alloc_reloc_control(void) INIT_LIST_HEAD(&rc->reloc_roots); backref_cache_init(&rc->backref_cache); mapping_tree_init(&rc->reloc_root_tree); - extent_io_tree_init(&rc->processed_blocks, NULL); + extent_io_tree_init(&rc->processed_blocks, + fs_info->btree_inode->i_mapping); return rc; } @@ -4110,7 +4111,7 @@ int btrfs_relocate_block_group(struct btrfs_root *extent_root, u64 group_start) int rw = 0; int err = 0; - rc = alloc_reloc_control(); + rc = alloc_reloc_control(fs_info); if (!rc) return -ENOMEM; @@ -4311,7 +4312,7 @@ int btrfs_recover_relocation(struct btrfs_root *root) if (list_empty(&reloc_roots)) goto out; - rc = alloc_reloc_control(); + rc = alloc_reloc_control(root->fs_info); if (!rc) { err = -ENOMEM; goto out; -- cgit v0.10.2 From 2932505abe7c56477315a3d93ffb3c27c5182e9d Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Sun, 26 May 2013 13:50:27 +0000 Subject: Btrfs: fix use-after-free bug during umount Commit be283b2e674a09457d4563729015adb637ce7cc1 ( Btrfs: use helper to cleanup tree roots) introduced the following bug, BUG: unable to handle kernel NULL pointer dereference at 0000000000000034 IP: [] extent_buffer_get+0x4/0xa [btrfs] [...] Pid: 2463, comm: btrfs-cache-1 Tainted: G O 3.9.0+ #4 innotek GmbH VirtualBox/VirtualBox RIP: 0010:[] [] extent_buffer_get+0x4/0xa [btrfs] Process btrfs-cache-1 (pid: 2463, threadinfo ffff880112d60000, task ffff880117679730) [...] Call Trace: [] btrfs_search_slot+0x104/0x64d [btrfs] [] btrfs_next_old_leaf+0xa7/0x334 [btrfs] [] btrfs_next_leaf+0x10/0x12 [btrfs] [] caching_thread+0x1a3/0x2e0 [btrfs] [] worker_loop+0x14b/0x48e [btrfs] [] ? btrfs_queue_worker+0x25c/0x25c [btrfs] [] kthread+0x8d/0x95 [] ? kthread_freezable_should_stop+0x43/0x43 [] ret_from_fork+0x7c/0xb0 [] ? kthread_freezable_should_stop+0x43/0x43 RIP [] extent_buffer_get+0x4/0xa [btrfs] We've free'ed commit_root before actually getting to free block groups where caching thread needs valid extent_root->commit_root. Signed-off-by: Liu Bo Signed-off-by: Josef Bacik Signed-off-by: Chris Mason diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index bdaa092..7c66c23 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -3512,10 +3512,10 @@ int close_ctree(struct btrfs_root *root) percpu_counter_sum(&fs_info->delalloc_bytes)); } - free_root_pointers(fs_info, 1); - btrfs_free_block_groups(fs_info); + free_root_pointers(fs_info, 1); + del_fs_roots(fs_info); iput(fs_info->btree_inode); -- cgit v0.10.2 From 13e6c37b989859e70b0d73d3f2cb0aa022159b17 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Thu, 30 May 2013 16:55:44 -0400 Subject: Btrfs: stop all workers before cleaning up roots Dave reported a panic because the extent_root->commit_root was NULL in the caching kthread. That is because we just unset it in free_root_pointers, which is not the correct thing to do, we have to either wait for the caching kthread to complete or hold the extent_commit_sem lock so we know the thread has exited. This patch makes the kthreads all stop first and then we do our cleanup. This should fix the race. Thanks, Reported-by: David Sterba Signed-off-by: Josef Bacik diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 7c66c23..b8b60b6 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -3514,13 +3514,13 @@ int close_ctree(struct btrfs_root *root) btrfs_free_block_groups(fs_info); - free_root_pointers(fs_info, 1); + btrfs_stop_all_workers(fs_info); del_fs_roots(fs_info); - iput(fs_info->btree_inode); + free_root_pointers(fs_info, 1); - btrfs_stop_all_workers(fs_info); + iput(fs_info->btree_inode); #ifdef CONFIG_BTRFS_FS_CHECK_INTEGRITY if (btrfs_test_opt(root, CHECK_INTEGRITY)) -- cgit v0.10.2 From 346dbb79ea0118ebb0df372b35cab9d5805216cd Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 25 Apr 2013 19:28:54 +0200 Subject: irqdomain: export irq_domain_add_simple All other irq_domain_add_* functions are exported already, and apparently this one got left out by mistake, which causes build errors for ARM allmodconfig kernels: ERROR: "irq_domain_add_simple" [drivers/gpio/gpio-rcar.ko] undefined! ERROR: "irq_domain_add_simple" [drivers/gpio/gpio-em.ko] undefined! Signed-off-by: Arnd Bergmann Acked-by: Simon Horman Signed-off-by: Grant Likely diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c index 5a83dde..d1adaed 100644 --- a/kernel/irq/irqdomain.c +++ b/kernel/irq/irqdomain.c @@ -191,6 +191,7 @@ struct irq_domain *irq_domain_add_simple(struct device_node *of_node, /* A linear domain is the default */ return irq_domain_add_linear(of_node, size, ops, host_data); } +EXPORT_SYMBOL_GPL(irq_domain_add_simple); /** * irq_domain_add_legacy() - Allocate and register a legacy revmap irq_domain. -- cgit v0.10.2 From 275e31b10ce20613aedceaa5160129c64b260a98 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Tue, 14 May 2013 19:02:45 +0800 Subject: kernel/irq/irqdomain.c: before use 'irq_data', need check it whether valid. Since irq_data may be NULL, if so, we WARN_ON(), and continue, 'hwirq' which related with 'irq_data' has to initialize later, or it will cause issue. Signed-off-by: Chen Gang Signed-off-by: Grant Likely diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c index d1adaed..8c4c8ea 100644 --- a/kernel/irq/irqdomain.c +++ b/kernel/irq/irqdomain.c @@ -398,11 +398,12 @@ static void irq_domain_disassociate_many(struct irq_domain *domain, while (count--) { int irq = irq_base + count; struct irq_data *irq_data = irq_get_irq_data(irq); - irq_hw_number_t hwirq = irq_data->hwirq; + irq_hw_number_t hwirq; if (WARN_ON(!irq_data || irq_data->domain != domain)) continue; + hwirq = irq_data->hwirq; irq_set_status_flags(irq, IRQ_NOREQUEST); /* remove chip and handler */ -- cgit v0.10.2 From 94a63da0ac1a67bfb8b30aec1086523c5031ea5a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 6 Jun 2013 12:10:23 +0100 Subject: irqdomain: document the simple domain first_irq The first_irq needs to be zero to get a linear domain and that comes with special semantics. We want to simplify this going forward but some documentation never hurts. Signed-off-by: Linus Walleij Signed-off-by: Grant Likely diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c index 8c4c8ea..54a4d52 100644 --- a/kernel/irq/irqdomain.c +++ b/kernel/irq/irqdomain.c @@ -143,7 +143,10 @@ static unsigned int irq_domain_legacy_revmap(struct irq_domain *domain, * irq_domain_add_simple() - Allocate and register a simple irq_domain. * @of_node: pointer to interrupt controller's device tree node. * @size: total number of irqs in mapping - * @first_irq: first number of irq block assigned to the domain + * @first_irq: first number of irq block assigned to the domain, + * pass zero to assign irqs on-the-fly. This will result in a + * linear IRQ domain so it is important to use irq_create_mapping() + * for each used IRQ, especially when SPARSE_IRQ is enabled. * @ops: map/unmap domain callbacks * @host_data: Controller private data pointer * -- cgit v0.10.2 From d94ea3f6d21e8b4398285516cc307c81d7374ec9 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 6 Jun 2013 14:11:38 +0100 Subject: irqchip: Return -EPERM for reserved IRQs The irqdomain core will report a log message for any attempted map call that fails unless the error code is -EPERM. This patch changes the Versatile irq controller drivers to use -EPERM because it is normal for a subset of the IRQ inputs to be marked as reserved on the various Versatile platforms. Signed-off-by: Grant Likely diff --git a/drivers/irqchip/irq-versatile-fpga.c b/drivers/irqchip/irq-versatile-fpga.c index 065b7a3..47a52ab 100644 --- a/drivers/irqchip/irq-versatile-fpga.c +++ b/drivers/irqchip/irq-versatile-fpga.c @@ -119,7 +119,7 @@ static int fpga_irqdomain_map(struct irq_domain *d, unsigned int irq, /* Skip invalid IRQs, only register handlers for the real ones */ if (!(f->valid & BIT(hwirq))) - return -ENOTSUPP; + return -EPERM; irq_set_chip_data(irq, f); irq_set_chip_and_handler(irq, &f->chip, handle_level_irq); diff --git a/drivers/irqchip/irq-vic.c b/drivers/irqchip/irq-vic.c index 884d11c..2bbb004 100644 --- a/drivers/irqchip/irq-vic.c +++ b/drivers/irqchip/irq-vic.c @@ -197,7 +197,7 @@ static int vic_irqdomain_map(struct irq_domain *d, unsigned int irq, /* Skip invalid IRQs, only register handlers for the real ones */ if (!(v->valid_sources & (1 << hwirq))) - return -ENOTSUPP; + return -EPERM; irq_set_chip_and_handler(irq, &vic_chip, handle_level_irq); irq_set_chip_data(irq, v->base); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); -- cgit v0.10.2 From 3cf138a6393d4ae2aeabce4c4b776d7d15cce69b Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 31 May 2013 08:40:35 -0300 Subject: [media] exynos4-is: Prevent NULL pointer dereference when firmware isn't loaded Ensure the firmware isn't accessed in the driver when the firmware loading routine has not completed. This fixes a potential kernel crash: [ 96.510000] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 96.520000] pgd = ee604000 [ 96.520000] [00000000] *pgd=6e947831, *pte=00000000, *ppte=00000000 [ 96.530000] Internal error: Oops: 17 [#1] PREEMPT SMP ARM [ 96.530000] Modules linked in: [ 96.530000] CPU: 2 PID: 2787 Comm: camera_test Not tainted 3.10.0-rc1-00269-gcdbde37-dirty #2158 [ 96.545000] task: ee42e400 ti: edfcc000 task.ti: edfcc000 [ 96.545000] PC is at fimc_is_start_firmware+0x14/0x94 [ 96.545000] LR is at fimc_isp_subdev_s_power+0x13c/0x1f8 ... [ 96.745000] [] (fimc_is_start_firmware+0x14/0x94) from [] (fimc_isp_subdev_s_power+0x13c/0x1f8) [ 96.745000] [] (fimc_isp_subdev_s_power+0x13c/0x1f8) from [] (__subdev_set_power+0x70/0x84) [ 96.745000] [] (__subdev_set_power+0x70/0x84) from [] (fimc_pipeline_s_power+0xc8/0x164) [ 96.745000] [] (fimc_pipeline_s_power+0xc8/0x164) from [] (__fimc_pipeline_open+0x90/0x268) [ 96.745000] [] (__fimc_pipeline_open+0x90/0x268) from [] (fimc_capture_open+0xe4/0x1ec) [ 96.745000] [] (fimc_capture_open+0xe4/0x1ec) from [] (v4l2_open+0xa8/0xe4) [ 96.745000] [] (v4l2_open+0xa8/0xe4) from [] (chrdev_open+0x9c/0x158) [ 96.745000] [] (chrdev_open+0x9c/0x158) from [] (do_dentry_open+0x1f4/0x27c) [ 96.745000] [] (do_dentry_open+0x1f4/0x27c) from [] (finish_open+0x34/0x50) [ 96.745000] [] (finish_open+0x34/0x50) from [] (do_last+0x59c/0xbcc) [ 96.745000] [] (do_last+0x59c/0xbcc) from [] (path_openat+0xb0/0x484) [ 96.745000] [] (path_openat+0xb0/0x484) from [] (do_filp_open+0x30/0x84) [ 96.745000] [] (do_filp_open+0x30/0x84) from [] (do_sys_open+0xe8/0x170) [ 96.745000] [] (do_sys_open+0xe8/0x170) from [] (ret_fast_syscall+0x0/0x30) Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/exynos4-is/fimc-is.c b/drivers/media/platform/exynos4-is/fimc-is.c index 47c6363..1adf6df 100644 --- a/drivers/media/platform/exynos4-is/fimc-is.c +++ b/drivers/media/platform/exynos4-is/fimc-is.c @@ -326,6 +326,11 @@ int fimc_is_start_firmware(struct fimc_is *is) struct device *dev = &is->pdev->dev; int ret; + if (is->fw.f_w == NULL) { + dev_err(dev, "firmware is not loaded\n"); + return -EINVAL; + } + memcpy(is->memory.vaddr, is->fw.f_w->data, is->fw.f_w->size); wmb(); @@ -941,7 +946,8 @@ static int fimc_is_remove(struct platform_device *pdev) vb2_dma_contig_cleanup_ctx(is->alloc_ctx); fimc_is_put_clocks(is); fimc_is_debugfs_remove(is); - release_firmware(is->fw.f_w); + if (is->fw.f_w) + release_firmware(is->fw.f_w); fimc_is_free_cpu_memory(is); return 0; -- cgit v0.10.2 From b4155d7d5b2c4e82238d629c451f7c27c9f37d9c Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 31 May 2013 08:40:36 -0300 Subject: [media] exynos4-is: Ensure fimc-is clocks are not enabled until properly configured Use clk_prepare_enable/clk_unprepare_disable instead of preparing the clocks during the driver initalization and then using just clk_disable/ clk_enable. The clock framework doesn't guarantee a clock will not get enabled during e.g. clk_set_parent if clk_prepare has been called on it. So we ensure clk_prepare() is called only when it is safe to enable the clocks, i.e. the parent clocks and the clocks' frequencies are set. It must be ensured the FIMC-IS clocks have proper frequencies before they are enabled, otherwise the whole system will hang. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyunmin Park Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/exynos4-is/fimc-is.c b/drivers/media/platform/exynos4-is/fimc-is.c index 1adf6df..89f28fe 100644 --- a/drivers/media/platform/exynos4-is/fimc-is.c +++ b/drivers/media/platform/exynos4-is/fimc-is.c @@ -71,7 +71,6 @@ static void fimc_is_put_clocks(struct fimc_is *is) for (i = 0; i < ISS_CLKS_MAX; i++) { if (IS_ERR(is->clocks[i])) continue; - clk_unprepare(is->clocks[i]); clk_put(is->clocks[i]); is->clocks[i] = ERR_PTR(-EINVAL); } @@ -90,12 +89,6 @@ static int fimc_is_get_clocks(struct fimc_is *is) ret = PTR_ERR(is->clocks[i]); goto err; } - ret = clk_prepare(is->clocks[i]); - if (ret < 0) { - clk_put(is->clocks[i]); - is->clocks[i] = ERR_PTR(-EINVAL); - goto err; - } } return 0; @@ -103,7 +96,7 @@ err: fimc_is_put_clocks(is); dev_err(&is->pdev->dev, "failed to get clock: %s\n", fimc_is_clocks[i]); - return -ENXIO; + return ret; } static int fimc_is_setup_clocks(struct fimc_is *is) @@ -144,7 +137,7 @@ int fimc_is_enable_clocks(struct fimc_is *is) for (i = 0; i < ISS_GATE_CLKS_MAX; i++) { if (IS_ERR(is->clocks[i])) continue; - ret = clk_enable(is->clocks[i]); + ret = clk_prepare_enable(is->clocks[i]); if (ret < 0) { dev_err(&is->pdev->dev, "clock %s enable failed\n", fimc_is_clocks[i]); @@ -163,7 +156,7 @@ void fimc_is_disable_clocks(struct fimc_is *is) for (i = 0; i < ISS_GATE_CLKS_MAX; i++) { if (!IS_ERR(is->clocks[i])) { - clk_disable(is->clocks[i]); + clk_disable_unprepare(is->clocks[i]); pr_debug("disabled clock: %s\n", fimc_is_clocks[i]); } } -- cgit v0.10.2 From ac2a4a86643aa74236508f0a8c0e34b0622b0b46 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 31 May 2013 08:40:37 -0300 Subject: [media] exynos4-is: Fix reported colorspace at FIMC-IS-ISP subdev The FIMC-IS-ISP handles only Bayer formats thus V4L2_COLORSPACE_SRGB should be used. This change applies to the code first added in v3.10. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/exynos4-is/fimc-isp.c b/drivers/media/platform/exynos4-is/fimc-isp.c index d63947f..7ede30b 100644 --- a/drivers/media/platform/exynos4-is/fimc-isp.c +++ b/drivers/media/platform/exynos4-is/fimc-isp.c @@ -138,7 +138,7 @@ static int fimc_isp_subdev_get_fmt(struct v4l2_subdev *sd, return 0; } - mf->colorspace = V4L2_COLORSPACE_JPEG; + mf->colorspace = V4L2_COLORSPACE_SRGB; mutex_lock(&isp->subdev_lock); __is_get_frame_size(is, &cur_fmt); @@ -194,7 +194,7 @@ static int fimc_isp_subdev_set_fmt(struct v4l2_subdev *sd, v4l2_dbg(1, debug, sd, "%s: pad%d: code: 0x%x, %dx%d\n", __func__, fmt->pad, mf->code, mf->width, mf->height); - mf->colorspace = V4L2_COLORSPACE_JPEG; + mf->colorspace = V4L2_COLORSPACE_SRGB; mutex_lock(&isp->subdev_lock); __isp_subdev_try_format(isp, fmt); -- cgit v0.10.2 From 6301b13213d55e51b7255b1098618ba99d2945cd Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 10 May 2013 12:46:35 -0300 Subject: [media] exynos4-is: Remove "sysreg" clock handling The "sysreg" clock is required by multiple subsystems and none of the other drivers handles this clock explicitly. It is currently assumed that this clock is always on, left in its default state after system reset. Remove handling of this clock from the FIMC-IS driver to avoid breaking other subsystems. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/exynos4-is/fimc-is.c b/drivers/media/platform/exynos4-is/fimc-is.c index 89f28fe..520e439 100644 --- a/drivers/media/platform/exynos4-is/fimc-is.c +++ b/drivers/media/platform/exynos4-is/fimc-is.c @@ -48,7 +48,6 @@ static char *fimc_is_clocks[ISS_CLKS_MAX] = { [ISS_CLK_LITE0] = "lite0", [ISS_CLK_LITE1] = "lite1", [ISS_CLK_MPLL] = "mpll", - [ISS_CLK_SYSREG] = "sysreg", [ISS_CLK_ISP] = "isp", [ISS_CLK_DRC] = "drc", [ISS_CLK_FD] = "fd", diff --git a/drivers/media/platform/exynos4-is/fimc-is.h b/drivers/media/platform/exynos4-is/fimc-is.h index f5275a5..606a7c9 100644 --- a/drivers/media/platform/exynos4-is/fimc-is.h +++ b/drivers/media/platform/exynos4-is/fimc-is.h @@ -73,7 +73,6 @@ enum { ISS_CLK_LITE0, ISS_CLK_LITE1, ISS_CLK_MPLL, - ISS_CLK_SYSREG, ISS_CLK_ISP, ISS_CLK_DRC, ISS_CLK_FD, -- cgit v0.10.2 From dfd50fc9030a62521838eecbe488e1962edcba80 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 29 May 2013 05:03:32 -0300 Subject: [media] DocBook/media/v4l: update version number The version number was still 3.9: update to 3.10. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml index bfc93cd..bfe823d 100644 --- a/Documentation/DocBook/media/v4l/v4l2.xml +++ b/Documentation/DocBook/media/v4l/v4l2.xml @@ -493,7 +493,7 @@ and discussions on the V4L mailing list. Video for Linux Two API Specification - Revision 3.9 + Revision 3.10 &sub-common; -- cgit v0.10.2 From 609c4c12af79b1ba5fd2d31727a95dd3a319c0ae Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 29 May 2013 10:44:22 -0300 Subject: [media] cx88: fix NULL pointer dereference This fixes a NULL pointer deference when loading the cx88_dvb module for a Hauppauge HVR4000. The bugzilla bug report is here: https://bugzilla.kernel.org/show_bug.cgi?id=56271 The cause is that the wm8775 is optional, so even though the board info says there is one, it doesn't have to be there. Checking whether the module was actually loaded is much safer. Note that this driver is quite buggy when it comes to unloading and reloading modules. Unloading cx8800 and reloading it again will still cause a crash, most likely because either the i2c bus isn't unloaded at the right time and/or the v4l2_device_unregister isn't called at the right time. Signed-off-by: Hans Verkuil Reported-by: Sebastian Frei Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/pci/cx88/cx88-alsa.c b/drivers/media/pci/cx88/cx88-alsa.c index 27d6262..aba5b1c 100644 --- a/drivers/media/pci/cx88/cx88-alsa.c +++ b/drivers/media/pci/cx88/cx88-alsa.c @@ -615,7 +615,7 @@ static int snd_cx88_volume_put(struct snd_kcontrol *kcontrol, int changed = 0; u32 old; - if (core->board.audio_chip == V4L2_IDENT_WM8775) + if (core->sd_wm8775) snd_cx88_wm8775_volume_put(kcontrol, value); left = value->value.integer.value[0] & 0x3f; @@ -682,8 +682,7 @@ static int snd_cx88_switch_put(struct snd_kcontrol *kcontrol, vol ^= bit; cx_swrite(SHADOW_AUD_VOL_CTL, AUD_VOL_CTL, vol); /* Pass mute onto any WM8775 */ - if ((core->board.audio_chip == V4L2_IDENT_WM8775) && - ((1<<6) == bit)) + if (core->sd_wm8775 && ((1<<6) == bit)) wm8775_s_ctrl(core, V4L2_CID_AUDIO_MUTE, 0 != (vol & bit)); ret = 1; } @@ -903,7 +902,7 @@ static int cx88_audio_initdev(struct pci_dev *pci, goto error; /* If there's a wm8775 then add a Line-In ALC switch */ - if (core->board.audio_chip == V4L2_IDENT_WM8775) + if (core->sd_wm8775) snd_ctl_add(card, snd_ctl_new1(&snd_cx88_alc_switch, chip)); strcpy (card->driver, "CX88x"); diff --git a/drivers/media/pci/cx88/cx88-video.c b/drivers/media/pci/cx88/cx88-video.c index 1b00615..c7a9be1 100644 --- a/drivers/media/pci/cx88/cx88-video.c +++ b/drivers/media/pci/cx88/cx88-video.c @@ -385,8 +385,7 @@ int cx88_video_mux(struct cx88_core *core, unsigned int input) /* The wm8775 module has the "2" route hardwired into the initialization. Some boards may use different routes for different inputs. HVR-1300 surely does */ - if (core->board.audio_chip && - core->board.audio_chip == V4L2_IDENT_WM8775) { + if (core->sd_wm8775) { call_all(core, audio, s_routing, INPUT(input).audioroute, 0, 0); } @@ -771,8 +770,7 @@ static int video_open(struct file *file) cx_write(MO_GP1_IO, core->board.radio.gpio1); cx_write(MO_GP2_IO, core->board.radio.gpio2); if (core->board.radio.audioroute) { - if(core->board.audio_chip && - core->board.audio_chip == V4L2_IDENT_WM8775) { + if (core->sd_wm8775) { call_all(core, audio, s_routing, core->board.radio.audioroute, 0, 0); } @@ -959,7 +957,7 @@ static int cx8800_s_aud_ctrl(struct v4l2_ctrl *ctrl) u32 value,mask; /* Pass changes onto any WM8775 */ - if (core->board.audio_chip == V4L2_IDENT_WM8775) { + if (core->sd_wm8775) { switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: wm8775_s_ctrl(core, ctrl->id, ctrl->val); -- cgit v0.10.2 From 3963d4fb869de1144aebe6eef074995f086961c4 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 2 Jun 2013 07:55:59 -0300 Subject: [media] v4l2-ctrls: V4L2_CTRL_CLASS_FM_RX controls are also valid radio controls The radio filter function that filters controls that are valid for a radio device should also accept V4L2_CTRL_CLASS_FM_RX controls. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c index ebb8e48..fccd08b 100644 --- a/drivers/media/v4l2-core/v4l2-ctrls.c +++ b/drivers/media/v4l2-core/v4l2-ctrls.c @@ -1835,6 +1835,8 @@ bool v4l2_ctrl_radio_filter(const struct v4l2_ctrl *ctrl) { if (V4L2_CTRL_ID2CLASS(ctrl->id) == V4L2_CTRL_CLASS_FM_TX) return true; + if (V4L2_CTRL_ID2CLASS(ctrl->id) == V4L2_CTRL_CLASS_FM_RX) + return true; switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: case V4L2_CID_AUDIO_VOLUME: -- cgit v0.10.2 From 560dde24adfdc9dbcd141c75faecc5e0402fe531 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 3 Jun 2013 04:35:22 -0300 Subject: [media] v4l2-ioctl: don't print the clips list The clips pointer is a userspace pointer, not a kernelspace pointer, so you can't dereference the clips pointer. Also add a few missing commas and newlines. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c index f81bda1..7658586 100644 --- a/drivers/media/v4l2-core/v4l2-ioctl.c +++ b/drivers/media/v4l2-core/v4l2-ioctl.c @@ -243,7 +243,6 @@ static void v4l_print_format(const void *arg, bool write_only) const struct v4l2_vbi_format *vbi; const struct v4l2_sliced_vbi_format *sliced; const struct v4l2_window *win; - const struct v4l2_clip *clip; unsigned i; pr_cont("type=%s", prt_names(p->type, v4l2_type_names)); @@ -253,7 +252,7 @@ static void v4l_print_format(const void *arg, bool write_only) pix = &p->fmt.pix; pr_cont(", width=%u, height=%u, " "pixelformat=%c%c%c%c, field=%s, " - "bytesperline=%u sizeimage=%u, colorspace=%d\n", + "bytesperline=%u, sizeimage=%u, colorspace=%d\n", pix->width, pix->height, (pix->pixelformat & 0xff), (pix->pixelformat >> 8) & 0xff, @@ -284,20 +283,14 @@ static void v4l_print_format(const void *arg, bool write_only) case V4L2_BUF_TYPE_VIDEO_OVERLAY: case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: win = &p->fmt.win; - pr_cont(", wxh=%dx%d, x,y=%d,%d, field=%s, " - "chromakey=0x%08x, bitmap=%p, " - "global_alpha=0x%02x\n", - win->w.width, win->w.height, - win->w.left, win->w.top, + /* Note: we can't print the clip list here since the clips + * pointer is a userspace pointer, not a kernelspace + * pointer. */ + pr_cont(", wxh=%dx%d, x,y=%d,%d, field=%s, chromakey=0x%08x, clipcount=%u, clips=%p, bitmap=%p, global_alpha=0x%02x\n", + win->w.width, win->w.height, win->w.left, win->w.top, prt_names(win->field, v4l2_field_names), - win->chromakey, win->bitmap, win->global_alpha); - clip = win->clips; - for (i = 0; i < win->clipcount; i++) { - printk(KERN_DEBUG "clip %u: wxh=%dx%d, x,y=%d,%d\n", - i, clip->c.width, clip->c.height, - clip->c.left, clip->c.top); - clip = clip->next; - } + win->chromakey, win->clipcount, win->clips, + win->bitmap, win->global_alpha); break; case V4L2_BUF_TYPE_VBI_CAPTURE: case V4L2_BUF_TYPE_VBI_OUTPUT: @@ -332,7 +325,7 @@ static void v4l_print_framebuffer(const void *arg, bool write_only) pr_cont("capability=0x%x, flags=0x%x, base=0x%p, width=%u, " "height=%u, pixelformat=%c%c%c%c, " - "bytesperline=%u sizeimage=%u, colorspace=%d\n", + "bytesperline=%u, sizeimage=%u, colorspace=%d\n", p->capability, p->flags, p->base, p->fmt.width, p->fmt.height, (p->fmt.pixelformat & 0xff), @@ -353,7 +346,7 @@ static void v4l_print_modulator(const void *arg, bool write_only) const struct v4l2_modulator *p = arg; if (write_only) - pr_cont("index=%u, txsubchans=0x%x", p->index, p->txsubchans); + pr_cont("index=%u, txsubchans=0x%x\n", p->index, p->txsubchans); else pr_cont("index=%u, name=%.*s, capability=0x%x, " "rangelow=%u, rangehigh=%u, txsubchans=0x%x\n", @@ -445,13 +438,13 @@ static void v4l_print_buffer(const void *arg, bool write_only) for (i = 0; i < p->length; ++i) { plane = &p->m.planes[i]; printk(KERN_DEBUG - "plane %d: bytesused=%d, data_offset=0x%08x " + "plane %d: bytesused=%d, data_offset=0x%08x, " "offset/userptr=0x%lx, length=%d\n", i, plane->bytesused, plane->data_offset, plane->m.userptr, plane->length); } } else { - pr_cont("bytesused=%d, offset/userptr=0x%lx, length=%d\n", + pr_cont(", bytesused=%d, offset/userptr=0x%lx, length=%d\n", p->bytesused, p->m.userptr, p->length); } @@ -504,6 +497,8 @@ static void v4l_print_streamparm(const void *arg, bool write_only) c->capability, c->outputmode, c->timeperframe.numerator, c->timeperframe.denominator, c->extendedmode, c->writebuffers); + } else { + pr_cont("\n"); } } @@ -734,11 +729,11 @@ static void v4l_print_frmsizeenum(const void *arg, bool write_only) p->type); switch (p->type) { case V4L2_FRMSIZE_TYPE_DISCRETE: - pr_cont(" wxh=%ux%u\n", + pr_cont(", wxh=%ux%u\n", p->discrete.width, p->discrete.height); break; case V4L2_FRMSIZE_TYPE_STEPWISE: - pr_cont(" min=%ux%u, max=%ux%u, step=%ux%u\n", + pr_cont(", min=%ux%u, max=%ux%u, step=%ux%u\n", p->stepwise.min_width, p->stepwise.min_height, p->stepwise.step_width, p->stepwise.step_height, p->stepwise.max_width, p->stepwise.max_height); @@ -764,12 +759,12 @@ static void v4l_print_frmivalenum(const void *arg, bool write_only) p->width, p->height, p->type); switch (p->type) { case V4L2_FRMIVAL_TYPE_DISCRETE: - pr_cont(" fps=%d/%d\n", + pr_cont(", fps=%d/%d\n", p->discrete.numerator, p->discrete.denominator); break; case V4L2_FRMIVAL_TYPE_STEPWISE: - pr_cont(" min=%d/%d, max=%d/%d, step=%d/%d\n", + pr_cont(", min=%d/%d, max=%d/%d, step=%d/%d\n", p->stepwise.min.numerator, p->stepwise.min.denominator, p->stepwise.max.numerator, @@ -807,8 +802,8 @@ static void v4l_print_event(const void *arg, bool write_only) pr_cont("value64=%lld, ", c->value64); else pr_cont("value=%d, ", c->value); - pr_cont("flags=0x%x, minimum=%d, maximum=%d, step=%d," - " default_value=%d\n", + pr_cont("flags=0x%x, minimum=%d, maximum=%d, step=%d, " + "default_value=%d\n", c->flags, c->minimum, c->maximum, c->step, c->default_value); break; @@ -845,7 +840,7 @@ static void v4l_print_freq_band(const void *arg, bool write_only) const struct v4l2_frequency_band *p = arg; pr_cont("tuner=%u, type=%u, index=%u, capability=0x%x, " - "rangelow=%u, rangehigh=%u, modulation=0x%x\n", + "rangelow=%u, rangehigh=%u, modulation=0x%x\n", p->tuner, p->type, p->index, p->capability, p->rangelow, p->rangehigh, p->modulation); -- cgit v0.10.2 From bbd465df73f0d8ba41b8a0732766a243d0f5b356 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Sun, 9 Jun 2013 01:25:57 +0200 Subject: hpfs: fix warnings when the filesystem fills up This patch fixes warnings due to missing lock on write error path. WARNING: at fs/hpfs/hpfs_fn.h:353 hpfs_truncate+0x75/0x80 [hpfs]() Hardware name: empty Pid: 26563, comm: dd Tainted: P O 3.9.4 #12 Call Trace: hpfs_truncate+0x75/0x80 [hpfs] hpfs_write_begin+0x84/0x90 [hpfs] _hpfs_bmap+0x10/0x10 [hpfs] generic_file_buffered_write+0x121/0x2c0 __generic_file_aio_write+0x1c7/0x3f0 generic_file_aio_write+0x7c/0x100 do_sync_write+0x98/0xd0 hpfs_file_write+0xd/0x50 [hpfs] vfs_write+0xa2/0x160 sys_write+0x51/0xa0 page_fault+0x22/0x30 system_call_fastpath+0x1a/0x1f Signed-off-by: Mikulas Patocka Cc: stable@kernel.org # 2.6.39+ Signed-off-by: Linus Torvalds diff --git a/fs/hpfs/file.c b/fs/hpfs/file.c index 3027f4d..e4ba5fe 100644 --- a/fs/hpfs/file.c +++ b/fs/hpfs/file.c @@ -109,10 +109,14 @@ static void hpfs_write_failed(struct address_space *mapping, loff_t to) { struct inode *inode = mapping->host; + hpfs_lock(inode->i_sb); + if (to > inode->i_size) { truncate_pagecache(inode, to, inode->i_size); hpfs_truncate(inode); } + + hpfs_unlock(inode->i_sb); } static int hpfs_write_begin(struct file *file, struct address_space *mapping, -- cgit v0.10.2 From 317ddd256b9c24b0d78fa8018f80f1e495481a10 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 8 Jun 2013 17:41:04 -0700 Subject: Linux 3.10-rc5 diff --git a/Makefile b/Makefile index 49aa84b..9040016 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 10 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Unicycling Gorilla # *DOCUMENTATION* -- cgit v0.10.2 From 9166e1aae3c90720fc389815909cb0bb815d9bca Mon Sep 17 00:00:00 2001 From: Katsuya Matsubara Date: Tue, 23 Apr 2013 07:51:35 -0300 Subject: [media] sh_veu: invoke v4l2_m2m_job_finish() even if a job has been aborted v4l2_m2m_job_finish() should be invoked even if the current ongoing job has been aborted since v4l2_m2m_ctx_release() which has issued the job abort may wait until the finish function is invoked. Signed-off-by: Katsuya Matsubara Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/sh_veu.c b/drivers/media/platform/sh_veu.c index 0b32cc3..6fecf9f 100644 --- a/drivers/media/platform/sh_veu.c +++ b/drivers/media/platform/sh_veu.c @@ -1138,10 +1138,7 @@ static irqreturn_t sh_veu_isr(int irq, void *dev_id) veu->xaction++; - if (!veu->aborting) - return IRQ_WAKE_THREAD; - - return IRQ_HANDLED; + return IRQ_WAKE_THREAD; } static int sh_veu_probe(struct platform_device *pdev) -- cgit v0.10.2 From 6abb3cf2c34554590791b7486e0e32b291feacc4 Mon Sep 17 00:00:00 2001 From: Katsuya Matsubara Date: Tue, 23 Apr 2013 07:51:36 -0300 Subject: [media] sh_veu: keep power supply until the m2m context is released In the sh_veu driver, only the interrupt handler 'sh_veu_bh' can invoke the v4l2_m2m_job_finish() function. So the hardware must be alive for handling interrupts until returning from v4l2_m2m_ctx_release(). Signed-off-by: Katsuya Matsubara Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/sh_veu.c b/drivers/media/platform/sh_veu.c index 6fecf9f..ebf90bf 100644 --- a/drivers/media/platform/sh_veu.c +++ b/drivers/media/platform/sh_veu.c @@ -1033,8 +1033,6 @@ static int sh_veu_release(struct file *file) dev_dbg(veu->dev, "Releasing instance %p\n", veu_file); - pm_runtime_put(veu->dev); - if (veu_file == veu->capture) { veu->capture = NULL; vb2_queue_release(v4l2_m2m_get_vq(veu->m2m_ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE)); @@ -1050,6 +1048,8 @@ static int sh_veu_release(struct file *file) veu->m2m_ctx = NULL; } + pm_runtime_put(veu->dev); + kfree(veu_file); return 0; -- cgit v0.10.2 From 697a6d2387692c7f9c94f3bfb3dac474aa840f02 Mon Sep 17 00:00:00 2001 From: Katsuya Matsubara Date: Tue, 23 Apr 2013 07:51:37 -0300 Subject: [media] sh_veu: fix the buffer size calculation The 'bytesperline' value only indicates the stride of the Y plane if the color format is planar, such as NV12. When calculating the total plane size, the size of CbCr plane must also be considered. Signed-off-by: Katsuya Matsubara Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/sh_veu.c b/drivers/media/platform/sh_veu.c index ebf90bf..59a9dee 100644 --- a/drivers/media/platform/sh_veu.c +++ b/drivers/media/platform/sh_veu.c @@ -905,11 +905,11 @@ static int sh_veu_queue_setup(struct vb2_queue *vq, if (ftmp.fmt.pix.width != pix->width || ftmp.fmt.pix.height != pix->height) return -EINVAL; - size = pix->bytesperline ? pix->bytesperline * pix->height : - pix->width * pix->height * fmt->depth >> 3; + size = pix->bytesperline ? pix->bytesperline * pix->height * fmt->depth / fmt->ydepth : + pix->width * pix->height * fmt->depth / fmt->ydepth; } else { vfmt = sh_veu_get_vfmt(veu, vq->type); - size = vfmt->bytesperline * vfmt->frame.height; + size = vfmt->bytesperline * vfmt->frame.height * vfmt->fmt->depth / vfmt->fmt->ydepth; } if (count < 2) -- cgit v0.10.2 From af44ad5edd1eb6ca92ed5be48e0004e1f04bf219 Mon Sep 17 00:00:00 2001 From: Wenbing Wang Date: Wed, 5 Jun 2013 06:37:14 -0300 Subject: [media] soc_camera: error dev remove and v4l2 call in soc_camera_close(), if ici->ops->remove() removes device firstly, and then call __soc_camera_power_off(), it has logic error. Since if remove device, it should disable subdev clk. but in __soc_camera_ power_off(), it will callback v4l2 s_power function which will read/write subdev registers to control power by i2c. and then i2c read/write will fail because of clk disable. So suggest to re-sequence two functions call. Change-Id: Iee7a6d4fc7c7c1addb5d342621eb8dcd00fa2745 Signed-off-by: Wenbing Wang Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/soc_camera/soc_camera.c b/drivers/media/platform/soc_camera/soc_camera.c index eea832c..3a4efbd 100644 --- a/drivers/media/platform/soc_camera/soc_camera.c +++ b/drivers/media/platform/soc_camera/soc_camera.c @@ -643,9 +643,9 @@ static int soc_camera_close(struct file *file) if (ici->ops->init_videobuf2) vb2_queue_release(&icd->vb2_vidq); - ici->ops->remove(icd); - __soc_camera_power_off(icd); + + ici->ops->remove(icd); } if (icd->streamer == file) -- cgit v0.10.2 From 820de86a90089ee607d7864538c98a23b503c846 Mon Sep 17 00:00:00 2001 From: Patrik Jakobsson Date: Wed, 5 Jun 2013 14:24:01 +0200 Subject: drm/gma500/psb: Unpin framebuffer on crtc disable The framebuffer needs to be unpinned in the crtc->disable callback because of previous pinning in psb_intel_pipe_set_base(). This will fix a memory leak where the framebuffer was released but not unpinned properly. This patch only affects Poulsbo. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=889511 Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=812113 Cc: stable@vger.kernel.org Reviewed-by: Daniel Vetter Signed-off-by: Patrik Jakobsson diff --git a/drivers/gpu/drm/gma500/psb_intel_display.c b/drivers/gpu/drm/gma500/psb_intel_display.c index 6e8f42b..12d129e 100644 --- a/drivers/gpu/drm/gma500/psb_intel_display.c +++ b/drivers/gpu/drm/gma500/psb_intel_display.c @@ -1150,6 +1150,19 @@ static void psb_intel_crtc_destroy(struct drm_crtc *crtc) kfree(psb_intel_crtc); } +static void psb_intel_crtc_disable(struct drm_crtc *crtc) +{ + struct gtt_range *gt; + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + + crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); + + if (crtc->fb) { + gt = to_psb_fb(crtc->fb)->gtt; + psb_gtt_unpin(gt); + } +} + const struct drm_crtc_helper_funcs psb_intel_helper_funcs = { .dpms = psb_intel_crtc_dpms, .mode_fixup = psb_intel_crtc_mode_fixup, @@ -1157,6 +1170,7 @@ const struct drm_crtc_helper_funcs psb_intel_helper_funcs = { .mode_set_base = psb_intel_pipe_set_base, .prepare = psb_intel_crtc_prepare, .commit = psb_intel_crtc_commit, + .disable = psb_intel_crtc_disable, }; const struct drm_crtc_funcs psb_intel_crtc_funcs = { -- cgit v0.10.2 From 22e7c385a80d771aaf3a15ae7ccea3b0686bbe10 Mon Sep 17 00:00:00 2001 From: Patrik Jakobsson Date: Sat, 8 Jun 2013 20:23:08 +0200 Subject: drm/gma500/cdv: Unpin framebuffer on crtc disable The framebuffer needs to be unpinned in the crtc->disable callback because of previous pinning in psb_intel_pipe_set_base(). This will fix a memory leak where the framebuffer was released but not unpinned properly. This patch only affects Cedarview. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=889511 Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=812113 Cc: stable@vger.kernel.org Reviewed-by: Daniel Vetter Signed-off-by: Patrik Jakobsson diff --git a/drivers/gpu/drm/gma500/cdv_intel_display.c b/drivers/gpu/drm/gma500/cdv_intel_display.c index 3cfd093..d6742dc 100644 --- a/drivers/gpu/drm/gma500/cdv_intel_display.c +++ b/drivers/gpu/drm/gma500/cdv_intel_display.c @@ -1750,6 +1750,19 @@ static void cdv_intel_crtc_destroy(struct drm_crtc *crtc) kfree(psb_intel_crtc); } +static void cdv_intel_crtc_disable(struct drm_crtc *crtc) +{ + struct gtt_range *gt; + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + + crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); + + if (crtc->fb) { + gt = to_psb_fb(crtc->fb)->gtt; + psb_gtt_unpin(gt); + } +} + const struct drm_crtc_helper_funcs cdv_intel_helper_funcs = { .dpms = cdv_intel_crtc_dpms, .mode_fixup = cdv_intel_crtc_mode_fixup, @@ -1757,6 +1770,7 @@ const struct drm_crtc_helper_funcs cdv_intel_helper_funcs = { .mode_set_base = cdv_intel_pipe_set_base, .prepare = cdv_intel_crtc_prepare, .commit = cdv_intel_crtc_commit, + .disable = cdv_intel_crtc_disable, }; const struct drm_crtc_funcs cdv_intel_crtc_funcs = { -- cgit v0.10.2 From 3463cf1aad48ef43dd0b4cbd7fed15dcc8d2ca53 Mon Sep 17 00:00:00 2001 From: Patrik Jakobsson Date: Sun, 26 May 2013 17:56:19 +0200 Subject: drm/gma500/psb: Fix cursor gem obj referencing on psb The internal crtc cursor gem object pointer was never set/updated since it was required to be set in the first place. Fixing this will make the pin/unpin count match and prevent cursor objects from leaking when userspace drops all references to it. Also make sure we drop the gem obj reference on failure. This patch only affects Poulsbo chips. Signed-off-by: Patrik Jakobsson diff --git a/drivers/gpu/drm/gma500/psb_intel_display.c b/drivers/gpu/drm/gma500/psb_intel_display.c index 12d129e..6666493 100644 --- a/drivers/gpu/drm/gma500/psb_intel_display.c +++ b/drivers/gpu/drm/gma500/psb_intel_display.c @@ -843,7 +843,7 @@ static int psb_intel_crtc_cursor_set(struct drm_crtc *crtc, struct gtt_range *cursor_gt = psb_intel_crtc->cursor_gt; struct drm_gem_object *obj; void *tmp_dst, *tmp_src; - int ret, i, cursor_pages; + int ret = 0, i, cursor_pages; /* if we want to turn of the cursor ignore width and height */ if (!handle) { @@ -880,7 +880,8 @@ static int psb_intel_crtc_cursor_set(struct drm_crtc *crtc, if (obj->size < width * height * 4) { dev_dbg(dev->dev, "buffer is to small\n"); - return -ENOMEM; + ret = -ENOMEM; + goto unref_cursor; } gt = container_of(obj, struct gtt_range, gem); @@ -889,13 +890,14 @@ static int psb_intel_crtc_cursor_set(struct drm_crtc *crtc, ret = psb_gtt_pin(gt); if (ret) { dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle); - return ret; + goto unref_cursor; } if (dev_priv->ops->cursor_needs_phys) { if (cursor_gt == NULL) { dev_err(dev->dev, "No hardware cursor mem available"); - return -ENOMEM; + ret = -ENOMEM; + goto unref_cursor; } /* Prevent overflow */ @@ -936,9 +938,14 @@ static int psb_intel_crtc_cursor_set(struct drm_crtc *crtc, struct gtt_range, gem); psb_gtt_unpin(gt); drm_gem_object_unreference(psb_intel_crtc->cursor_obj); - psb_intel_crtc->cursor_obj = obj; } - return 0; + + psb_intel_crtc->cursor_obj = obj; + return ret; + +unref_cursor: + drm_gem_object_unreference(obj); + return ret; } static int psb_intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) -- cgit v0.10.2 From 70b1304eeedf211fc9fa185b43350bd9ab4c119c Mon Sep 17 00:00:00 2001 From: Patrik Jakobsson Date: Sun, 26 May 2013 18:44:48 +0200 Subject: drm/gma500/cdv: Fix cursor gem obj referencing on cdv The internal crtc cursor gem object pointer was never set/updated since it was required to be set in the first place. Fixing this will make the pin/unpin count match and prevent cursor objects from leaking when userspace drops all references to it. Also make sure we drop the gem obj reference on failure. This patch only affects Cedarview chips. Signed-off-by: Patrik Jakobsson diff --git a/drivers/gpu/drm/gma500/cdv_intel_display.c b/drivers/gpu/drm/gma500/cdv_intel_display.c index d6742dc..82430ad 100644 --- a/drivers/gpu/drm/gma500/cdv_intel_display.c +++ b/drivers/gpu/drm/gma500/cdv_intel_display.c @@ -1462,7 +1462,7 @@ static int cdv_intel_crtc_cursor_set(struct drm_crtc *crtc, size_t addr = 0; struct gtt_range *gt; struct drm_gem_object *obj; - int ret; + int ret = 0; /* if we want to turn of the cursor ignore width and height */ if (!handle) { @@ -1499,7 +1499,8 @@ static int cdv_intel_crtc_cursor_set(struct drm_crtc *crtc, if (obj->size < width * height * 4) { dev_dbg(dev->dev, "buffer is to small\n"); - return -ENOMEM; + ret = -ENOMEM; + goto unref_cursor; } gt = container_of(obj, struct gtt_range, gem); @@ -1508,7 +1509,7 @@ static int cdv_intel_crtc_cursor_set(struct drm_crtc *crtc, ret = psb_gtt_pin(gt); if (ret) { dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle); - return ret; + goto unref_cursor; } addr = gt->offset; /* Or resource.start ??? */ @@ -1532,9 +1533,14 @@ static int cdv_intel_crtc_cursor_set(struct drm_crtc *crtc, struct gtt_range, gem); psb_gtt_unpin(gt); drm_gem_object_unreference(psb_intel_crtc->cursor_obj); - psb_intel_crtc->cursor_obj = obj; } - return 0; + + psb_intel_crtc->cursor_obj = obj; + return ret; + +unref_cursor: + drm_gem_object_unreference(obj); + return ret; } static int cdv_intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) -- cgit v0.10.2 From c5df457ffe6db7569de9fb856de490b5317c97b4 Mon Sep 17 00:00:00 2001 From: Kevin Hao Date: Wed, 5 Jun 2013 02:26:51 +0000 Subject: powerpc/pci: Check the bus address instead of resource address in pcibios_fixup_resources If a BAR has the value of 0, we would assume that it is unset yet and then mark the resource as unset and would reassign it later. But after commit 6c5705fe (powerpc/PCI: get rid of device resource fixups) the pcibios_fixup_resources is invoked after the bus address was translated to linux resource. So the value of res->start is resource address. And since the resource and bus address may be different, we should translate it to the bus address before doing the check. Signed-off-by: Kevin Hao Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 7f2273c..eabeec9 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -827,6 +827,7 @@ static void pcibios_fixup_resources(struct pci_dev *dev) } for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { struct resource *res = dev->resource + i; + struct pci_bus_region reg; if (!res->flags) continue; @@ -835,8 +836,9 @@ static void pcibios_fixup_resources(struct pci_dev *dev) * at 0 as unset as well, except if PCI_PROBE_ONLY is also set * since in that case, we don't want to re-assign anything */ + pcibios_resource_to_bus(dev, ®, res); if (pci_has_flag(PCI_REASSIGN_ALL_RSRC) || - (res->start == 0 && !pci_has_flag(PCI_PROBE_ONLY))) { + (reg.start == 0 && !pci_has_flag(PCI_PROBE_ONLY))) { /* Only print message if not re-assigning */ if (!pci_has_flag(PCI_REASSIGN_ALL_RSRC)) pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] " -- cgit v0.10.2 From b8b3de224f194005ad87ede6fd022fcc2bef3b1a Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Wed, 5 Jun 2013 14:25:50 +0000 Subject: powerpc/eeh: Don't check RTAS token to get PE addr RTAS token "ibm,get-config-addr-info" or ibm,get-config-addr-info2" are used to retrieve the PE address according to PCI address, which made up of domain/bus/slot/function. If we don't have those 2 tokens, the domain/bus/slot/function would be used as the address for EEH RTAS operations. Some older f/w might not have those 2 tokens and that blocks the EEH functionality to be initialized. It was introduced by commit e2af155c ("powerpc/eeh: pseries platform EEH initialization"). The patch skips the check on those 2 tokens so we can bring up EEH functionality successfully. And domain/bus/slot/function will be used as address for EEH RTAS operations. Cc: # v3.4+ Reported-by: Robert Knight Signed-off-by: Gavin Shan Tested-by: Robert Knight Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c index 19506f9..b456b15 100644 --- a/arch/powerpc/platforms/pseries/eeh_pseries.c +++ b/arch/powerpc/platforms/pseries/eeh_pseries.c @@ -83,7 +83,11 @@ static int pseries_eeh_init(void) ibm_configure_pe = rtas_token("ibm,configure-pe"); ibm_configure_bridge = rtas_token("ibm,configure-bridge"); - /* necessary sanity check */ + /* + * Necessary sanity check. We needn't check "get-config-addr-info" + * and its variant since the old firmware probably support address + * of domain/bus/slot/function for EEH RTAS operations. + */ if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE) { pr_warning("%s: RTAS service invalid\n", __func__); @@ -102,12 +106,6 @@ static int pseries_eeh_init(void) pr_warning("%s: RTAS service invalid\n", __func__); return -EINVAL; - } else if (ibm_get_config_addr_info2 == RTAS_UNKNOWN_SERVICE && - ibm_get_config_addr_info == RTAS_UNKNOWN_SERVICE) { - pr_warning("%s: RTAS service and " - " invalid\n", - __func__); - return -EINVAL; } else if (ibm_configure_pe == RTAS_UNKNOWN_SERVICE && ibm_configure_bridge == RTAS_UNKNOWN_SERVICE) { pr_warning("%s: RTAS service and " -- cgit v0.10.2 From 6a60f9e7d8bb3e81fa8bd6752f1473e216424ec4 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Tue, 4 Jun 2013 19:38:54 +0000 Subject: powerpc/power8: Fix oprofile and perf In 2ac6f42 powerpc/cputable: Fix oprofile_cpu_type on power8 we broke all power8 hw events. This reverts this change and uses oprofile_type instead. Perf now works on POWER8 again and oprofile will revert to using timers on POWER8. Kudos to mpe this fix. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 1f0937d..2a45d0f 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -452,8 +452,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .mmu_features = MMU_FTRS_POWER8, .icache_bsize = 128, .dcache_bsize = 128, - .oprofile_type = PPC_OPROFILE_POWER4, - .oprofile_cpu_type = 0, + .oprofile_type = PPC_OPROFILE_INVALID, + .oprofile_cpu_type = "ppc64/ibm-compat-v1", .cpu_setup = __setup_cpu_power8, .cpu_restore = __restore_cpu_power8, .platform = "power8", @@ -506,8 +506,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .dcache_bsize = 128, .num_pmcs = 6, .pmc_type = PPC_PMC_IBM, - .oprofile_cpu_type = 0, - .oprofile_type = PPC_OPROFILE_POWER4, + .oprofile_cpu_type = "ppc64/power8", + .oprofile_type = PPC_OPROFILE_INVALID, .cpu_setup = __setup_cpu_power8, .cpu_restore = __restore_cpu_power8, .platform = "power8", -- cgit v0.10.2 From d7c67fb1cf00b84829ae06fca04ad39408f156ba Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 29 May 2013 21:33:18 +0000 Subject: powerpc/pseries: Simplify denormalization handler The following simplifies the denorm code by using macros to generate the long stream of almost identical instructions. This patch results in no changes to the output binary, but removes a lot of lines of code. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index e6eba1b..3c9296b 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -454,38 +454,14 @@ BEGIN_FTR_SECTION xori r10,r10,(MSR_FE0|MSR_FE1) mtmsrd r10 sync - fmr 0,0 - fmr 1,1 - fmr 2,2 - fmr 3,3 - fmr 4,4 - fmr 5,5 - fmr 6,6 - fmr 7,7 - fmr 8,8 - fmr 9,9 - fmr 10,10 - fmr 11,11 - fmr 12,12 - fmr 13,13 - fmr 14,14 - fmr 15,15 - fmr 16,16 - fmr 17,17 - fmr 18,18 - fmr 19,19 - fmr 20,20 - fmr 21,21 - fmr 22,22 - fmr 23,23 - fmr 24,24 - fmr 25,25 - fmr 26,26 - fmr 27,27 - fmr 28,28 - fmr 29,29 - fmr 30,30 - fmr 31,31 + +#define FMR2(n) fmr (n), (n) ; fmr n+1, n+1 +#define FMR4(n) FMR2(n) ; FMR2(n+2) +#define FMR8(n) FMR4(n) ; FMR4(n+4) +#define FMR16(n) FMR8(n) ; FMR8(n+8) +#define FMR32(n) FMR16(n) ; FMR16(n+16) + FMR32(0) + FTR_SECTION_ELSE /* * To denormalise we need to move a copy of the register to itself. @@ -495,38 +471,14 @@ FTR_SECTION_ELSE oris r10,r10,MSR_VSX@h mtmsrd r10 sync - XVCPSGNDP(0,0,0) - XVCPSGNDP(1,1,1) - XVCPSGNDP(2,2,2) - XVCPSGNDP(3,3,3) - XVCPSGNDP(4,4,4) - XVCPSGNDP(5,5,5) - XVCPSGNDP(6,6,6) - XVCPSGNDP(7,7,7) - XVCPSGNDP(8,8,8) - XVCPSGNDP(9,9,9) - XVCPSGNDP(10,10,10) - XVCPSGNDP(11,11,11) - XVCPSGNDP(12,12,12) - XVCPSGNDP(13,13,13) - XVCPSGNDP(14,14,14) - XVCPSGNDP(15,15,15) - XVCPSGNDP(16,16,16) - XVCPSGNDP(17,17,17) - XVCPSGNDP(18,18,18) - XVCPSGNDP(19,19,19) - XVCPSGNDP(20,20,20) - XVCPSGNDP(21,21,21) - XVCPSGNDP(22,22,22) - XVCPSGNDP(23,23,23) - XVCPSGNDP(24,24,24) - XVCPSGNDP(25,25,25) - XVCPSGNDP(26,26,26) - XVCPSGNDP(27,27,27) - XVCPSGNDP(28,28,28) - XVCPSGNDP(29,29,29) - XVCPSGNDP(30,30,30) - XVCPSGNDP(31,31,31) + +#define XVCPSGNDP2(n) XVCPSGNDP(n,n,n) ; XVCPSGNDP(n+1,n+1,n+1) +#define XVCPSGNDP4(n) XVCPSGNDP2(n) ; XVCPSGNDP2(n+2) +#define XVCPSGNDP8(n) XVCPSGNDP4(n) ; XVCPSGNDP4(n+4) +#define XVCPSGNDP16(n) XVCPSGNDP8(n) ; XVCPSGNDP8(n+8) +#define XVCPSGNDP32(n) XVCPSGNDP16(n) ; XVCPSGNDP16(n+16) + XVCPSGNDP32(0) + ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_206) mtspr SPRN_HSRR0,r11 mtcrf 0x80,r9 -- cgit v0.10.2 From fb0fce3e554e5513aaa1c1c52b2ece11feea3c7d Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 29 May 2013 21:33:19 +0000 Subject: powerpc/power8: Update denormalization handler POWER8 can take a denormalisation exception on any VSX registers. This does the extra 32 VSX registers we don't currently handle. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index 3c9296b..e783453 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -480,6 +480,16 @@ FTR_SECTION_ELSE XVCPSGNDP32(0) ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_206) + +BEGIN_FTR_SECTION + b denorm_done +END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S) +/* + * To denormalise we need to move a copy of the register to itself. + * For POWER8 we need to do that for all 64 VSX registers + */ + XVCPSGNDP32(32) +denorm_done: mtspr SPRN_HSRR0,r11 mtcrf 0x80,r9 ld r9,PACA_EXGEN+EX_R9(r13) -- cgit v0.10.2 From 82a9f16adc12f51c3f8ea59a7c3c120241aff836 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Thu, 16 May 2013 20:27:31 +0000 Subject: powerpc/hw_breakpoints: Add DABRX cpu feature to fix 32-bit regression When introducing support for DABRX in 4474ef0, we broke older 32-bit CPUs that don't have that register. Some CPUs have a DABR but not DABRX. Configuration are: - No 32bit CPUs have DABRX but some have DABR. - POWER4+ and below have the DABR but no DABRX. - 970 and POWER5 and above have DABR and DABRX. - POWER8 has DAWR, hence no DABRX. This introduces CPU_FTR_DABRX and sets it on appropriate CPUs. We use the top 64 bits for CPU FTR bits since only 64 bit CPUs have this. Processors that don't have the DABRX will still work as they will fall back to software filtering these breakpoints via perf_exclude_event(). Signed-off-by: Michael Neuling Reported-by: "Gorelik, Jacob (335F)" cc: stable@vger.kernel.org (v3.9 only) Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index 26807e5..6f3887d 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -176,6 +176,7 @@ extern const char *powerpc_base_platform; #define CPU_FTR_CFAR LONG_ASM_CONST(0x0100000000000000) #define CPU_FTR_HAS_PPR LONG_ASM_CONST(0x0200000000000000) #define CPU_FTR_DAWR LONG_ASM_CONST(0x0400000000000000) +#define CPU_FTR_DABRX LONG_ASM_CONST(0x0800000000000000) #ifndef __ASSEMBLY__ @@ -394,19 +395,20 @@ extern const char *powerpc_base_platform; CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_ARCH_201 | \ CPU_FTR_ALTIVEC_COMP | CPU_FTR_CAN_NAP | CPU_FTR_MMCRA | \ CPU_FTR_CP_USE_DCBTZ | CPU_FTR_STCX_CHECKS_ADDRESS | \ - CPU_FTR_HVMODE) + CPU_FTR_HVMODE | CPU_FTR_DABRX) #define CPU_FTRS_POWER5 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_MMCRA | CPU_FTR_SMT | \ CPU_FTR_COHERENT_ICACHE | CPU_FTR_PURR | \ - CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB) + CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_DABRX) #define CPU_FTRS_POWER6 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_MMCRA | CPU_FTR_SMT | \ CPU_FTR_COHERENT_ICACHE | \ CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ CPU_FTR_DSCR | CPU_FTR_UNALIGNED_LD_STD | \ - CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_CFAR) + CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_CFAR | \ + CPU_FTR_DABRX) #define CPU_FTRS_POWER7 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_ARCH_206 |\ CPU_FTR_MMCRA | CPU_FTR_SMT | \ @@ -415,7 +417,7 @@ extern const char *powerpc_base_platform; CPU_FTR_DSCR | CPU_FTR_SAO | CPU_FTR_ASYM_SMT | \ CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \ CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | \ - CPU_FTR_VMX_COPY | CPU_FTR_HAS_PPR) + CPU_FTR_VMX_COPY | CPU_FTR_HAS_PPR | CPU_FTR_DABRX) #define CPU_FTRS_POWER8 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_ARCH_206 |\ CPU_FTR_MMCRA | CPU_FTR_SMT | \ @@ -430,14 +432,15 @@ extern const char *powerpc_base_platform; CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \ CPU_FTR_PAUSE_ZERO | CPU_FTR_CELL_TB_BUG | CPU_FTR_CP_USE_DCBTZ | \ - CPU_FTR_UNALIGNED_LD_STD) + CPU_FTR_UNALIGNED_LD_STD | CPU_FTR_DABRX) #define CPU_FTRS_PA6T (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP | \ - CPU_FTR_PURR | CPU_FTR_REAL_LE) + CPU_FTR_PURR | CPU_FTR_REAL_LE | CPU_FTR_DABRX) #define CPU_FTRS_COMPATIBLE (CPU_FTR_USE_TB | CPU_FTR_PPCAS_ARCH_V2) #define CPU_FTRS_A2 (CPU_FTR_USE_TB | CPU_FTR_SMT | CPU_FTR_DBELL | \ - CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN | CPU_FTR_ICSWX) + CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN | \ + CPU_FTR_ICSWX | CPU_FTR_DABRX ) #ifdef __powerpc64__ #ifdef CONFIG_PPC_BOOK3E diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index a902723..b0f3e3f 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -399,7 +399,8 @@ static inline int __set_dabr(unsigned long dabr, unsigned long dabrx) static inline int __set_dabr(unsigned long dabr, unsigned long dabrx) { mtspr(SPRN_DABR, dabr); - mtspr(SPRN_DABRX, dabrx); + if (cpu_has_feature(CPU_FTR_DABRX)) + mtspr(SPRN_DABRX, dabrx); return 0; } #else -- cgit v0.10.2 From 6772faa1ba22eba18d087c2459030a683b65be57 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 5 Jun 2013 17:58:20 +0000 Subject: powerpc/perf: Fix deadlock caused by calling printk() in PMU exception In commit bc09c21 "Fix finding overflowed PMC in interrupt" we added a printk() to the PMU exception handler. Unfortunately that is not safe. The problem is that the PMU exception may run even when interrupts are soft disabled, aka NMI context. We do this so that we can profile parts of the kernel that have interrupts soft-disabled. But by calling printk() from the exception handler, we can potentially deadlock in the printk code on logbuf_lock, eg: [c00000038ba575c0] c000000000081928 .vprintk_emit+0xa8/0x540 [c00000038ba576a0] c0000000007bcde8 .printk+0x48/0x58 [c00000038ba57710] c000000000076504 .perf_event_interrupt+0x2d4/0x490 [c00000038ba57810] c00000000001f6f8 .performance_monitor_exception+0x48/0x60 [c00000038ba57880] c0000000000032cc performance_monitor_common+0x14c/0x180 --- Exception: f01 (Performance Monitor) at c0000000007b25d4 ._raw_spin_lock_irq +0x64/0xc0 [c00000038ba57bf0] c00000000007ed90 .devkmsg_read+0xd0/0x5a0 [c00000038ba57d00] c0000000001c2934 .vfs_read+0xc4/0x1e0 [c00000038ba57d90] c0000000001c2cd8 .SyS_read+0x58/0xd0 [c00000038ba57e30] c000000000009d54 syscall_exit+0x0/0x98 --- Exception: c01 (System Call) at 00001fffffbf6f7c SP (3ffff6d4de10) is in userspace Fix it by making sure we only call printk() when we are not in NMI context. Signed-off-by: Michael Ellerman Cc: # 3.9 Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index 845c867..29c6482 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -1758,7 +1758,7 @@ static void perf_event_interrupt(struct pt_regs *regs) } } } - if ((!found) && printk_ratelimit()) + if (!found && !nmi && printk_ratelimit()) printk(KERN_WARNING "Can't find PMC that caused IRQ\n"); /* -- cgit v0.10.2 From b11ae95100f7061b39a15e5c1ecbf862464ac4b4 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 5 Jun 2013 18:03:36 +0000 Subject: powerpc: Partial revert of "Context switch more PMU related SPRs" In commit 59affcd I added context switching of more PMU SPRs, because they are potentially exposed to userspace on Power8. However despite me being a smart arse in the commit message it's actually not correct. In particular it interacts badly with a global perf record. We will have to do something more complicated, but that will have to wait for 3.11. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 246b11c..8741c85 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -465,20 +465,6 @@ BEGIN_FTR_SECTION std r0, THREAD_EBBHR(r3) mfspr r0, SPRN_EBBRR std r0, THREAD_EBBRR(r3) - - /* PMU registers made user read/(write) by EBB */ - mfspr r0, SPRN_SIAR - std r0, THREAD_SIAR(r3) - mfspr r0, SPRN_SDAR - std r0, THREAD_SDAR(r3) - mfspr r0, SPRN_SIER - std r0, THREAD_SIER(r3) - mfspr r0, SPRN_MMCR0 - std r0, THREAD_MMCR0(r3) - mfspr r0, SPRN_MMCR2 - std r0, THREAD_MMCR2(r3) - mfspr r0, SPRN_MMCRA - std r0, THREAD_MMCRA(r3) END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) #endif @@ -581,20 +567,6 @@ BEGIN_FTR_SECTION ld r0, THREAD_EBBRR(r4) mtspr SPRN_EBBRR, r0 - /* PMU registers made user read/(write) by EBB */ - ld r0, THREAD_SIAR(r4) - mtspr SPRN_SIAR, r0 - ld r0, THREAD_SDAR(r4) - mtspr SPRN_SDAR, r0 - ld r0, THREAD_SIER(r4) - mtspr SPRN_SIER, r0 - ld r0, THREAD_MMCR0(r4) - mtspr SPRN_MMCR0, r0 - ld r0, THREAD_MMCR2(r4) - mtspr SPRN_MMCR2, r0 - ld r0, THREAD_MMCRA(r4) - mtspr SPRN_MMCRA, r0 - ld r0,THREAD_TAR(r4) mtspr SPRN_TAR,r0 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) -- cgit v0.10.2 From ac16d1484efd5d2d9077c55453b1f8abff49fc18 Mon Sep 17 00:00:00 2001 From: Matthias Schiffer Date: Tue, 28 May 2013 17:32:32 +0200 Subject: batman-adv: wait for rtnl in batadv_store_mesh_iface instead of failing if it is taken The rtnl_lock in batadv_store_mesh_iface has been converted to a rtnl_trylock some time ago to avoid a possible deadlock between rtnl and s_active on removal of the sysfs nodes. The behaviour introduced by that was quite confusing as it could lead to the sysfs store to fail, making batman-adv setup scripts unreliable. As recently the sysfs removal was postponed to a worker not running with the rtnl taken, the deadlock can't occur any more and it is safe to change the trylock back to a lock to make the sysfs store reliable again. Signed-off-by: Matthias Schiffer Reviewed-by: Simon Wunderlich Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli diff --git a/net/batman-adv/sysfs.c b/net/batman-adv/sysfs.c index 15a22ef..929e304 100644 --- a/net/batman-adv/sysfs.c +++ b/net/batman-adv/sysfs.c @@ -582,10 +582,7 @@ static ssize_t batadv_store_mesh_iface(struct kobject *kobj, (strncmp(hard_iface->soft_iface->name, buff, IFNAMSIZ) == 0)) goto out; - if (!rtnl_trylock()) { - ret = -ERESTARTSYS; - goto out; - } + rtnl_lock(); if (status_tmp == BATADV_IF_NOT_IN_USE) { batadv_hardif_disable_interface(hard_iface, -- cgit v0.10.2 From 7c24bbbeab4159f924b65b1e94878e597b762714 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Thu, 23 May 2013 13:07:42 +0200 Subject: batman-adv: forward late OGMs from best next hop When a packet is received from another node first and later from the best next hop, this packet is dropped. However the first OGM was sent with the BATADV_NOT_BEST_NEXT_HOP flag and thus dropped by neighbors. The late OGM from the best neighbor is then dropped because it is a duplicate. If this situation happens constantly, a node might end up not forwarding the "valid" OGMs anymore, and nodes behind will starve from not getting valid OGMs. Fix this by refining the duplicate checking behaviour: The actions should depend on whether it was a duplicate for a neighbor only or for the originator. OGMs which are not duplicates for a specific neighbor will now be considered in batadv_iv_ogm_forward(), but only actually forwarded for the best next hop. Therefore, late OGMs from the best next hop are forwarded now and not dropped as duplicates anymore. Signed-off-by: Simon Wunderlich Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c index 071f288..f680ee1 100644 --- a/net/batman-adv/bat_iv_ogm.c +++ b/net/batman-adv/bat_iv_ogm.c @@ -29,6 +29,21 @@ #include "bat_algo.h" #include "network-coding.h" +/** + * batadv_dup_status - duplicate status + * @BATADV_NO_DUP: the packet is a duplicate + * @BATADV_ORIG_DUP: OGM is a duplicate in the originator (but not for the + * neighbor) + * @BATADV_NEIGH_DUP: OGM is a duplicate for the neighbor + * @BATADV_PROTECTED: originator is currently protected (after reboot) + */ +enum batadv_dup_status { + BATADV_NO_DUP = 0, + BATADV_ORIG_DUP, + BATADV_NEIGH_DUP, + BATADV_PROTECTED, +}; + static struct batadv_neigh_node * batadv_iv_ogm_neigh_new(struct batadv_hard_iface *hard_iface, const uint8_t *neigh_addr, @@ -650,7 +665,7 @@ batadv_iv_ogm_orig_update(struct batadv_priv *bat_priv, const struct batadv_ogm_packet *batadv_ogm_packet, struct batadv_hard_iface *if_incoming, const unsigned char *tt_buff, - int is_duplicate) + enum batadv_dup_status dup_status) { struct batadv_neigh_node *neigh_node = NULL, *tmp_neigh_node = NULL; struct batadv_neigh_node *router = NULL; @@ -676,7 +691,7 @@ batadv_iv_ogm_orig_update(struct batadv_priv *bat_priv, continue; } - if (is_duplicate) + if (dup_status != BATADV_NO_DUP) continue; spin_lock_bh(&tmp_neigh_node->lq_update_lock); @@ -718,7 +733,7 @@ batadv_iv_ogm_orig_update(struct batadv_priv *bat_priv, neigh_node->tq_avg = batadv_ring_buffer_avg(neigh_node->tq_recv); spin_unlock_bh(&neigh_node->lq_update_lock); - if (!is_duplicate) { + if (dup_status == BATADV_NO_DUP) { orig_node->last_ttl = batadv_ogm_packet->header.ttl; neigh_node->last_ttl = batadv_ogm_packet->header.ttl; } @@ -902,15 +917,16 @@ out: return ret; } -/* processes a batman packet for all interfaces, adjusts the sequence number and - * finds out whether it is a duplicate. - * returns: - * 1 the packet is a duplicate - * 0 the packet has not yet been received - * -1 the packet is old and has been received while the seqno window - * was protected. Caller should drop it. +/** + * batadv_iv_ogm_update_seqnos - process a batman packet for all interfaces, + * adjust the sequence number and find out whether it is a duplicate + * @ethhdr: ethernet header of the packet + * @batadv_ogm_packet: OGM packet to be considered + * @if_incoming: interface on which the OGM packet was received + * + * Returns duplicate status as enum batadv_dup_status */ -static int +static enum batadv_dup_status batadv_iv_ogm_update_seqnos(const struct ethhdr *ethhdr, const struct batadv_ogm_packet *batadv_ogm_packet, const struct batadv_hard_iface *if_incoming) @@ -918,17 +934,18 @@ batadv_iv_ogm_update_seqnos(const struct ethhdr *ethhdr, struct batadv_priv *bat_priv = netdev_priv(if_incoming->soft_iface); struct batadv_orig_node *orig_node; struct batadv_neigh_node *tmp_neigh_node; - int is_duplicate = 0; + int is_dup; int32_t seq_diff; int need_update = 0; - int set_mark, ret = -1; + int set_mark; + enum batadv_dup_status ret = BATADV_NO_DUP; uint32_t seqno = ntohl(batadv_ogm_packet->seqno); uint8_t *neigh_addr; uint8_t packet_count; orig_node = batadv_get_orig_node(bat_priv, batadv_ogm_packet->orig); if (!orig_node) - return 0; + return BATADV_NO_DUP; spin_lock_bh(&orig_node->ogm_cnt_lock); seq_diff = seqno - orig_node->last_real_seqno; @@ -936,22 +953,29 @@ batadv_iv_ogm_update_seqnos(const struct ethhdr *ethhdr, /* signalize caller that the packet is to be dropped. */ if (!hlist_empty(&orig_node->neigh_list) && batadv_window_protected(bat_priv, seq_diff, - &orig_node->batman_seqno_reset)) + &orig_node->batman_seqno_reset)) { + ret = BATADV_PROTECTED; goto out; + } rcu_read_lock(); hlist_for_each_entry_rcu(tmp_neigh_node, &orig_node->neigh_list, list) { - is_duplicate |= batadv_test_bit(tmp_neigh_node->real_bits, - orig_node->last_real_seqno, - seqno); - neigh_addr = tmp_neigh_node->addr; + is_dup = batadv_test_bit(tmp_neigh_node->real_bits, + orig_node->last_real_seqno, + seqno); + if (batadv_compare_eth(neigh_addr, ethhdr->h_source) && - tmp_neigh_node->if_incoming == if_incoming) + tmp_neigh_node->if_incoming == if_incoming) { set_mark = 1; - else + if (is_dup) + ret = BATADV_NEIGH_DUP; + } else { set_mark = 0; + if (is_dup && (ret != BATADV_NEIGH_DUP)) + ret = BATADV_ORIG_DUP; + } /* if the window moved, set the update flag. */ need_update |= batadv_bit_get_packet(bat_priv, @@ -971,8 +995,6 @@ batadv_iv_ogm_update_seqnos(const struct ethhdr *ethhdr, orig_node->last_real_seqno = seqno; } - ret = is_duplicate; - out: spin_unlock_bh(&orig_node->ogm_cnt_lock); batadv_orig_node_free_ref(orig_node); @@ -994,7 +1016,8 @@ static void batadv_iv_ogm_process(const struct ethhdr *ethhdr, int is_broadcast = 0, is_bidirect; bool is_single_hop_neigh = false; bool is_from_best_next_hop = false; - int is_duplicate, sameseq, simlar_ttl; + int sameseq, similar_ttl; + enum batadv_dup_status dup_status; uint32_t if_incoming_seqno; uint8_t *prev_sender; @@ -1138,10 +1161,10 @@ static void batadv_iv_ogm_process(const struct ethhdr *ethhdr, if (!orig_node) return; - is_duplicate = batadv_iv_ogm_update_seqnos(ethhdr, batadv_ogm_packet, - if_incoming); + dup_status = batadv_iv_ogm_update_seqnos(ethhdr, batadv_ogm_packet, + if_incoming); - if (is_duplicate == -1) { + if (dup_status == BATADV_PROTECTED) { batadv_dbg(BATADV_DBG_BATMAN, bat_priv, "Drop packet: packet within seqno protection time (sender: %pM)\n", ethhdr->h_source); @@ -1211,11 +1234,12 @@ static void batadv_iv_ogm_process(const struct ethhdr *ethhdr, * seqno and similar ttl as the non-duplicate */ sameseq = orig_node->last_real_seqno == ntohl(batadv_ogm_packet->seqno); - simlar_ttl = orig_node->last_ttl - 3 <= batadv_ogm_packet->header.ttl; - if (is_bidirect && (!is_duplicate || (sameseq && simlar_ttl))) + similar_ttl = orig_node->last_ttl - 3 <= batadv_ogm_packet->header.ttl; + if (is_bidirect && ((dup_status == BATADV_NO_DUP) || + (sameseq && similar_ttl))) batadv_iv_ogm_orig_update(bat_priv, orig_node, ethhdr, batadv_ogm_packet, if_incoming, - tt_buff, is_duplicate); + tt_buff, dup_status); /* is single hop (direct) neighbor */ if (is_single_hop_neigh) { @@ -1236,7 +1260,7 @@ static void batadv_iv_ogm_process(const struct ethhdr *ethhdr, goto out_neigh; } - if (is_duplicate) { + if (dup_status == BATADV_NEIGH_DUP) { batadv_dbg(BATADV_DBG_BATMAN, bat_priv, "Drop packet: duplicate packet received\n"); goto out_neigh; -- cgit v0.10.2 From d5b4c93e67b0b1291aa8e2aaf694e40afc3412d0 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Fri, 7 Jun 2013 16:52:05 +0200 Subject: batman-adv: Don't handle address updates when bla is disabled The bridge loop avoidance has a hook to handle address updates of the originator. These should not be handled when bridge loop avoidance is disabled - it might send some bridge loop avoidance packets which should not appear if bla is disabled. Signed-off-by: Simon Wunderlich Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c index 379061c..de27b31 100644 --- a/net/batman-adv/bridge_loop_avoidance.c +++ b/net/batman-adv/bridge_loop_avoidance.c @@ -1067,6 +1067,10 @@ void batadv_bla_update_orig_address(struct batadv_priv *bat_priv, group = htons(crc16(0, primary_if->net_dev->dev_addr, ETH_ALEN)); bat_priv->bla.claim_dest.group = group; + /* purge everything when bridge loop avoidance is turned off */ + if (!atomic_read(&bat_priv->bridge_loop_avoidance)) + oldif = NULL; + if (!oldif) { batadv_bla_purge_claims(bat_priv, NULL, 1); batadv_bla_purge_backbone_gw(bat_priv, 1); -- cgit v0.10.2 From 7ee2aff373498a887cde0d564f89cf05377c538e Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sun, 9 Jun 2013 16:02:03 +0100 Subject: drm/i915: Fix hotplug interrupt enabling for SDVOC A broken conditional would lead to SDVOC waiting upon hotplug events on SDVOB - and so miss all activity on its SDVO port. This regression has been introduced in commit 1d843f9de4e6dc6a899b6f07f106c00da09925e6 Author: Egbert Eich Date: Mon Feb 25 12:06:49 2013 -0500 DRM/I915: Add enum hpd_pin to intel_encoder. References: https://bugs.freedesktop.org/show_bug.cgi?id=58405 Signed-off-by: Chris Wilson [danvet: Add regression note.] Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 4c47b44..69886d9 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -2793,8 +2793,10 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) /* Only enable the hotplug irq if we need it, to work around noisy * hotplug lines. */ - if (intel_sdvo->hotplug_active) - intel_encoder->hpd_pin = HPD_SDVO_B ? HPD_SDVO_B : HPD_SDVO_C; + if (intel_sdvo->hotplug_active) { + intel_encoder->hpd_pin = + intel_sdvo->is_sdvob ? HPD_SDVO_B : HPD_SDVO_C; + } intel_encoder->compute_config = intel_sdvo_compute_config; intel_encoder->disable = intel_disable_sdvo; -- cgit v0.10.2 From 7ba220cec0bbe9453c1f958cf282f84a157c924f Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sun, 9 Jun 2013 16:02:04 +0100 Subject: drm/i915: Enable hotplug interrupts after querying hw capabilities. sdvo->hotplug_active is initialised during intel_sdvo_setup_outputs(), and so we never enabled the hotplug interrupts on SDVO as we were checking too early. This regression has been introduced somewhere in the hpd rework for the storm detection and handling starting with commit 1d843f9de4e6dc6a899b6f07f106c00da09925e6 Author: Egbert Eich Date: Mon Feb 25 12:06:49 2013 -0500 DRM/I915: Add enum hpd_pin to intel_encoder. and the follow-up patches to use the new encoder->hpd_pin variable for the different irq setup functions. The problem is that encoder->hpd_pin was set up _before_ the output setup was done and so before we could assess the hotplug capabilities of the outputs on an sdvo encoder. Reported-by: Alex Fiestas Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58405 Signed-off-by: Chris Wilson [danvet: Add regression note.] Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 69886d9..f44aa75 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -2790,14 +2790,6 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) SDVOB_HOTPLUG_INT_STATUS_I915 : SDVOC_HOTPLUG_INT_STATUS_I915; } - /* Only enable the hotplug irq if we need it, to work around noisy - * hotplug lines. - */ - if (intel_sdvo->hotplug_active) { - intel_encoder->hpd_pin = - intel_sdvo->is_sdvob ? HPD_SDVO_B : HPD_SDVO_C; - } - intel_encoder->compute_config = intel_sdvo_compute_config; intel_encoder->disable = intel_disable_sdvo; intel_encoder->mode_set = intel_sdvo_mode_set; @@ -2816,6 +2808,14 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) goto err_output; } + /* Only enable the hotplug irq if we need it, to work around noisy + * hotplug lines. + */ + if (intel_sdvo->hotplug_active) { + intel_encoder->hpd_pin = + intel_sdvo->is_sdvob ? HPD_SDVO_B : HPD_SDVO_C; + } + /* * Cloning SDVO with anything is often impossible, since the SDVO * encoder can request a special input timing mode. And even if that's -- cgit v0.10.2 From c3456fb3e4712d0448592af3c5d644c9472cd3c1 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Mon, 10 Jun 2013 09:47:58 +0200 Subject: drm/i915: prefer VBT modes for SVDO-LVDS over EDID In commit 53d3b4d7778daf15900867336c85d3f8dd70600c Author: Egbert Eich Date: Tue Jun 4 17:13:21 2013 +0200 drm/i915/sdvo: Use &intel_sdvo->ddc instead of intel_sdvo->i2c for DDC Egbert Eich fixed a long-standing bug where we simply used a non-working i2c controller to read the EDID for SDVO-LVDS panels. Unfortunately some machines seem to not be able to cope with the mode provided in the EDID. Specifically they seem to not be able to cope with a 4x pixel mutliplier instead of a 2x one, which seems to have been worked around by slightly changing the panels native mode in the VBT so that the dotclock is just barely above 50MHz. Since it took forever to notice the breakage it's fairly safe to assume that at least for SDVO-LVDS panels the VBT contains fairly sane data. So just switch around the order and use VBT modes first. v2: Also add EDID modes just in case, and spell Egbert correctly. v3: Elaborate a bit more about what's going on on Chris' machine. Cc: Egbert Eich Cc: Chris Wilson Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65524 Cc: stable@vger.kernel.org Reported-and-tested-by: Chris Wilson Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index f44aa75..d4ea6c2 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1777,10 +1777,13 @@ static void intel_sdvo_get_lvds_modes(struct drm_connector *connector) * arranged in priority order. */ intel_ddc_get_modes(connector, &intel_sdvo->ddc); - if (list_empty(&connector->probed_modes) == false) - goto end; - /* Fetch modes from VBT */ + /* + * Fetch modes from VBT. For SDVO prefer the VBT mode since some + * SDVO->LVDS transcoders can't cope with the EDID mode. Since + * drm_mode_probed_add adds the mode at the head of the list we add it + * last. + */ if (dev_priv->sdvo_lvds_vbt_mode != NULL) { newmode = drm_mode_duplicate(connector->dev, dev_priv->sdvo_lvds_vbt_mode); @@ -1792,7 +1795,6 @@ static void intel_sdvo_get_lvds_modes(struct drm_connector *connector) } } -end: list_for_each_entry(newmode, &connector->probed_modes, head) { if (newmode->type & DRM_MODE_TYPE_PREFERRED) { intel_sdvo->sdvo_lvds_fixed_mode = -- cgit v0.10.2 From 8c9b7a7b2fc2750af418ddc28e707c42e78aa0bf Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 10 Jun 2013 13:00:29 +0200 Subject: ACPI / video: Do not bind to device objects with a scan handler With the introduction of ACPI scan handlers, ACPI device objects with an ACPI scan handler attached to them must not be bound to by ACPI drivers any more. Unfortunately, however, the ACPI video driver attempts to do just that if there is a _ROM ACPI control method defined under a device object with an ACPI scan handler. Prevent that from happening by making the video driver's "add" routine check if the device object already has an ACPI scan handler attached to it and return an error code in that case. That is not sufficient, though, because acpi_bus_driver_init() would then clear the device object's driver_data that may be set by its scan handler, so for the fix to work acpi_bus_driver_init() has to be modified to leave driver_data as is on errors. References: https://bugzilla.kernel.org/show_bug.cgi?id=58091 Bisected-and-tested-by: Dmitry S. Demin Reported-and-tested-by: Jason Cassell Tracked-down-by: Aaron Lu Cc: 3.9+ Signed-off-by: Rafael J. Wysocki Reviewed-by: Aaron Lu diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 44225cb..b14ac46 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1017,11 +1017,8 @@ acpi_bus_driver_init(struct acpi_device *device, struct acpi_driver *driver) return -ENOSYS; result = driver->ops.add(device); - if (result) { - device->driver = NULL; - device->driver_data = NULL; + if (result) return result; - } device->driver = driver; diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 5d7075d..440eadf 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1722,6 +1722,9 @@ static int acpi_video_bus_add(struct acpi_device *device) int error; acpi_status status; + if (device->handler) + return -EINVAL; + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, device->parent->handle, 1, acpi_video_bus_match, NULL, -- cgit v0.10.2 From a8241c63517ec0b900695daa9003cddc41c536a1 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 3 Jun 2013 12:00:49 +0300 Subject: ipvs: info leak in __ip_vs_get_dest_entries() The entry struct has a 2 byte hole after ->port and another 4 byte hole after ->stats.outpkts. You must have CAP_NET_ADMIN in your namespace to hit this information leak. Signed-off-by: Dan Carpenter Acked-by: Julian Anastasov Signed-off-by: Simon Horman Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c index 5b142fb..9e6c2a0 100644 --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -2542,6 +2542,7 @@ __ip_vs_get_dest_entries(struct net *net, const struct ip_vs_get_dests *get, struct ip_vs_dest *dest; struct ip_vs_dest_entry entry; + memset(&entry, 0, sizeof(entry)); list_for_each_entry(dest, &svc->destinations, n_list) { if (count >= get->num_dests) break; -- cgit v0.10.2 From c46b54f7406780ec4cf9c9124d1cfb777674dc70 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 10 Jun 2013 15:34:04 +0200 Subject: s390/pci: Implement IRQ functions if !PCI All architectures must implement IRQ functions. Since various dependencies on !S390 were removed, there are various drivers that can be selected but will fail to link. Provide a dummy implementation of these functions for the !PCI case. Signed-off-by: Ben Hutchings Cc: stable@vger.kernel.org # 3.9 Acked-by: David S. Miller Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c index f7fb589..408e866 100644 --- a/arch/s390/kernel/irq.c +++ b/arch/s390/kernel/irq.c @@ -311,3 +311,67 @@ void measurement_alert_subclass_unregister(void) spin_unlock(&ma_subclass_lock); } EXPORT_SYMBOL(measurement_alert_subclass_unregister); + +void synchronize_irq(unsigned int irq) +{ + /* + * Not needed, the handler is protected by a lock and IRQs that occur + * after the handler is deleted are just NOPs. + */ +} +EXPORT_SYMBOL_GPL(synchronize_irq); + +#ifndef CONFIG_PCI + +/* Only PCI devices have dynamically-defined IRQ handlers */ + +int request_irq(unsigned int irq, irq_handler_t handler, + unsigned long irqflags, const char *devname, void *dev_id) +{ + return -EINVAL; +} +EXPORT_SYMBOL_GPL(request_irq); + +void free_irq(unsigned int irq, void *dev_id) +{ + WARN_ON(1); +} +EXPORT_SYMBOL_GPL(free_irq); + +void enable_irq(unsigned int irq) +{ + WARN_ON(1); +} +EXPORT_SYMBOL_GPL(enable_irq); + +void disable_irq(unsigned int irq) +{ + WARN_ON(1); +} +EXPORT_SYMBOL_GPL(disable_irq); + +#endif /* !CONFIG_PCI */ + +void disable_irq_nosync(unsigned int irq) +{ + disable_irq(irq); +} +EXPORT_SYMBOL_GPL(disable_irq_nosync); + +unsigned long probe_irq_on(void) +{ + return 0; +} +EXPORT_SYMBOL_GPL(probe_irq_on); + +int probe_irq_off(unsigned long val) +{ + return 0; +} +EXPORT_SYMBOL_GPL(probe_irq_off); + +unsigned int probe_irq_mask(unsigned long val) +{ + return val; +} +EXPORT_SYMBOL_GPL(probe_irq_mask); diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c index e6f15b5..f1e5be8 100644 --- a/arch/s390/pci/pci.c +++ b/arch/s390/pci/pci.c @@ -302,15 +302,6 @@ static int zpci_cfg_store(struct zpci_dev *zdev, int offset, u32 val, u8 len) return rc; } -void synchronize_irq(unsigned int irq) -{ - /* - * Not needed, the handler is protected by a lock and IRQs that occur - * after the handler is deleted are just NOPs. - */ -} -EXPORT_SYMBOL_GPL(synchronize_irq); - void enable_irq(unsigned int irq) { struct msi_desc *msi = irq_get_msi_desc(irq); @@ -327,30 +318,6 @@ void disable_irq(unsigned int irq) } EXPORT_SYMBOL_GPL(disable_irq); -void disable_irq_nosync(unsigned int irq) -{ - disable_irq(irq); -} -EXPORT_SYMBOL_GPL(disable_irq_nosync); - -unsigned long probe_irq_on(void) -{ - return 0; -} -EXPORT_SYMBOL_GPL(probe_irq_on); - -int probe_irq_off(unsigned long val) -{ - return 0; -} -EXPORT_SYMBOL_GPL(probe_irq_off); - -unsigned int probe_irq_mask(unsigned long val) -{ - return val; -} -EXPORT_SYMBOL_GPL(probe_irq_mask); - void pcibios_fixup_bus(struct pci_bus *bus) { } -- cgit v0.10.2 From b2c75c446ae72387916e2caf6e6dca815b6e5e6e Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Fri, 7 Jun 2013 15:26:03 -0400 Subject: xen/tmem: Don't over-write tmem_frontswap_poolid after tmem_frontswap_init set it. Commit 10a7a0771399a57a297fca9615450dbb3f88081a ("xen: tmem: enable Xen tmem shim to be built/loaded as a module") allows the tmem module to be loaded any time. For this work the frontswap API had to be able to asynchronously to call tmem_frontswap_init before or after the swap image had been set. That was added in git commit 905cd0e1bf9ffe82d6906a01fd974ea0f70be97a ("mm: frontswap: lazy initialization to allow tmem backends to build/run as modules"). Which means we could do this (The common case): modprobe tmem [so calls frontswap_register_ops, no ->init] modifies tmem_frontswap_poolid = -1 swapon /dev/xvda1 [__frontswap_init, calls -> init, tmem_frontswap_poolid is < 0 so tmem hypercall done] Or the failing one: swapon /dev/xvda1 [calls __frontswap_init, sets the need_init bitmap] modprobe tmem [calls frontswap_register_ops, -->init calls, finds out tmem_frontswap_poolid is 0, does not make a hypercall. Later in the module_init, sets tmem_frontswap_poolid=-1] Which meant that in the failing case we would not call the hypercall to initialize the pool and never be able to make any frontswap backend calls. Moving the frontswap_register_ops after setting the tmem_frontswap_poolid fixes it. Signed-off-by: Konrad Rzeszutek Wilk Reviewed-by: Bob Liu diff --git a/drivers/xen/tmem.c b/drivers/xen/tmem.c index cc072c6..0f0493c 100644 --- a/drivers/xen/tmem.c +++ b/drivers/xen/tmem.c @@ -379,10 +379,10 @@ static int xen_tmem_init(void) #ifdef CONFIG_FRONTSWAP if (tmem_enabled && frontswap) { char *s = ""; - struct frontswap_ops *old_ops = - frontswap_register_ops(&tmem_frontswap_ops); + struct frontswap_ops *old_ops; tmem_frontswap_poolid = -1; + old_ops = frontswap_register_ops(&tmem_frontswap_ops); if (IS_ERR(old_ops) || old_ops) { if (IS_ERR(old_ops)) return PTR_ERR(old_ops); -- cgit v0.10.2 From e63a24ddc79cc801766646fb643451ad366a1121 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Sat, 8 Jun 2013 19:15:41 +0000 Subject: MIPS: Alchemy: fix wait function Only an interrupt can wake the core from 'wait', enable interrupts locally before executing 'wait'. [ralf@linux-mips.org: This leave the race between an interrupt that's setting TIF_NEED_RESCHEd and entering the WAIT status. but at least it's going to bring Alchemy back from the dead, so I'm going to apply this patch.] Signed-off-by: Manuel Lauss Cc: Linux-MIPS Cc: Maciej W. Rozycki Patchwork: https://patchwork.linux-mips.org/patch/5408/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c index 3b09b88..0c655de 100644 --- a/arch/mips/kernel/idle.c +++ b/arch/mips/kernel/idle.c @@ -93,26 +93,27 @@ static void rm7k_wait_irqoff(void) } /* - * The Au1xxx wait is available only if using 32khz counter or - * external timer source, but specifically not CP0 Counter. - * alchemy/common/time.c may override cpu_wait! + * Au1 'wait' is only useful when the 32kHz counter is used as timer, + * since coreclock (and the cp0 counter) stops upon executing it. Only an + * interrupt can wake it, so they must be enabled before entering idle modes. */ static void au1k_wait(void) { + unsigned long c0status = read_c0_status() | 1; /* irqs on */ + __asm__( " .set mips3 \n" " cache 0x14, 0(%0) \n" " cache 0x14, 32(%0) \n" " sync \n" - " nop \n" + " mtc0 %1, $12 \n" /* wr c0status */ " wait \n" " nop \n" " nop \n" " nop \n" " nop \n" " .set mips0 \n" - : : "r" (au1k_wait)); - local_irq_enable(); + : : "r" (au1k_wait), "r" (c0status)); } static int __initdata nowait; -- cgit v0.10.2 From d414976d1ca721456f7b7c603a8699d117c2ec07 Mon Sep 17 00:00:00 2001 From: Markos Chandras Date: Mon, 10 Jun 2013 12:16:16 +0000 Subject: MIPS: include: mmu_context.h: Replace VIRTUALIZATION with KVM The kvm_* symbols are only available if KVM is selected. Fixes the following linking problem on a randconfig: arch/mips/built-in.o: In function `local_flush_tlb_mm': (.text+0x18a94): undefined reference to `kvm_local_flush_tlb_all' arch/mips/built-in.o: In function `local_flush_tlb_range': (.text+0x18d0c): undefined reference to `kvm_local_flush_tlb_all' kernel/built-in.o: In function `__schedule': core.c:(.sched.text+0x2a00): undefined reference to `kvm_local_flush_tlb_all' mm/built-in.o: In function `use_mm': (.text+0x30214): undefined reference to `kvm_local_flush_tlb_all' fs/built-in.o: In function `flush_old_exec': (.text+0xf0a0): undefined reference to `kvm_local_flush_tlb_all' make: *** [vmlinux] Error 1 Signed-off-by: Markos Chandras Acked-by: Steven J. Hill Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5437/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h index 8201160..516e6e9 100644 --- a/arch/mips/include/asm/mmu_context.h +++ b/arch/mips/include/asm/mmu_context.h @@ -117,7 +117,7 @@ get_new_mmu_context(struct mm_struct *mm, unsigned long cpu) if (! ((asid += ASID_INC) & ASID_MASK) ) { if (cpu_has_vtag_icache) flush_icache_all(); -#ifdef CONFIG_VIRTUALIZATION +#ifdef CONFIG_KVM kvm_local_flush_tlb_all(); /* start new asid cycle */ #else local_flush_tlb_all(); /* start new asid cycle */ -- cgit v0.10.2 From cb2f9938d0a57625644750e66373d3bf4d3a1601 Mon Sep 17 00:00:00 2001 From: Markos Chandras Date: Mon, 10 Jun 2013 10:35:26 +0000 Subject: MIPS: ftrace: Add missing CONFIG_DYNAMIC_FTRACE arch_ftrace_update_code and ftrace_modify_all_code are only available if CONFIG_DYNAMIC_FTRACE is selected. Fixes the following build problem on MIPS randconfig: arch/mips/kernel/ftrace.c: In function 'arch_ftrace_update_code': arch/mips/kernel/ftrace.c:31:2: error: implicit declaration of function 'ftrace_modify_all_code' [-Werror=implicit-function-declaration] Signed-off-by: Markos Chandras Acked-by: Steven J. Hill Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5435/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c index cf5509f..dba90ec 100644 --- a/arch/mips/kernel/ftrace.c +++ b/arch/mips/kernel/ftrace.c @@ -25,12 +25,16 @@ #define MCOUNT_OFFSET_INSNS 4 #endif +#ifdef CONFIG_DYNAMIC_FTRACE + /* Arch override because MIPS doesn't need to run this from stop_machine() */ void arch_ftrace_update_code(int command) { ftrace_modify_all_code(command); } +#endif + /* * Check if the address is in kernel space * -- cgit v0.10.2 From 21886725d58e92188159731c7c1aac803dd6b9dc Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 10 Jun 2013 18:29:37 +0200 Subject: USB: f81232: fix device initialisation at open Do not use uninitialised termios data to determine when to configure the device at open. This also prevents stack data from leaking to userspace. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c index 090b411..7d8dd5a 100644 --- a/drivers/usb/serial/f81232.c +++ b/drivers/usb/serial/f81232.c @@ -165,11 +165,12 @@ static void f81232_set_termios(struct tty_struct *tty, /* FIXME - Stubbed out for now */ /* Don't change anything if nothing has changed */ - if (!tty_termios_hw_change(&tty->termios, old_termios)) + if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) return; /* Do the real work here... */ - tty_termios_copy_hw(&tty->termios, old_termios); + if (old_termios) + tty_termios_copy_hw(&tty->termios, old_termios); } static int f81232_tiocmget(struct tty_struct *tty) @@ -187,12 +188,11 @@ static int f81232_tiocmset(struct tty_struct *tty, static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port) { - struct ktermios tmp_termios; int result; /* Setup termios */ if (tty) - f81232_set_termios(tty, port, &tmp_termios); + f81232_set_termios(tty, port, NULL); result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) { -- cgit v0.10.2 From 5e4211f1c47560c36a8b3d4544dfd866dcf7ccd0 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 10 Jun 2013 18:29:39 +0200 Subject: USB: spcp8x5: fix device initialisation at open Do not use uninitialised termios data to determine when to configure the device at open. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index cf3df79..ddf6c47 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -291,7 +291,6 @@ static void spcp8x5_set_termios(struct tty_struct *tty, struct spcp8x5_private *priv = usb_get_serial_port_data(port); unsigned long flags; unsigned int cflag = tty->termios.c_cflag; - unsigned int old_cflag = old_termios->c_cflag; unsigned short uartdata; unsigned char buf[2] = {0, 0}; int baud; @@ -299,15 +298,15 @@ static void spcp8x5_set_termios(struct tty_struct *tty, u8 control; /* check that they really want us to change something */ - if (!tty_termios_hw_change(&tty->termios, old_termios)) + if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) return; /* set DTR/RTS active */ spin_lock_irqsave(&priv->lock, flags); control = priv->line_control; - if ((old_cflag & CBAUD) == B0) { + if (old_termios && (old_termios->c_cflag & CBAUD) == B0) { priv->line_control |= MCR_DTR; - if (!(old_cflag & CRTSCTS)) + if (!(old_termios->c_cflag & CRTSCTS)) priv->line_control |= MCR_RTS; } if (control != priv->line_control) { @@ -394,7 +393,6 @@ static void spcp8x5_set_termios(struct tty_struct *tty, static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port) { - struct ktermios tmp_termios; struct usb_serial *serial = port->serial; struct spcp8x5_private *priv = usb_get_serial_port_data(port); int ret; @@ -411,7 +409,7 @@ static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port) spcp8x5_set_ctrl_line(port, priv->line_control); if (tty) - spcp8x5_set_termios(tty, port, &tmp_termios); + spcp8x5_set_termios(tty, port, NULL); port->port.drain_delay = 256; -- cgit v0.10.2 From 2d8f4447b58bba5f8cb895c07690434c02307eaf Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 10 Jun 2013 18:29:38 +0200 Subject: USB: pl2303: fix device initialisation at open Do not use uninitialised termios data to determine when to configure the device at open. This also prevents stack data from leaking to userspace in the OOM error path. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 7151659..048cd44 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -284,7 +284,7 @@ static void pl2303_set_termios(struct tty_struct *tty, serial settings even to the same values as before. Thus we actually need to filter in this specific case */ - if (!tty_termios_hw_change(&tty->termios, old_termios)) + if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) return; cflag = tty->termios.c_cflag; @@ -293,7 +293,8 @@ static void pl2303_set_termios(struct tty_struct *tty, if (!buf) { dev_err(&port->dev, "%s - out of memory.\n", __func__); /* Report back no change occurred */ - tty->termios = *old_termios; + if (old_termios) + tty->termios = *old_termios; return; } @@ -433,7 +434,7 @@ static void pl2303_set_termios(struct tty_struct *tty, control = priv->line_control; if ((cflag & CBAUD) == B0) priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); - else if ((old_termios->c_cflag & CBAUD) == B0) + else if (old_termios && (old_termios->c_cflag & CBAUD) == B0) priv->line_control |= (CONTROL_DTR | CONTROL_RTS); if (control != priv->line_control) { control = priv->line_control; @@ -492,7 +493,6 @@ static void pl2303_close(struct usb_serial_port *port) static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) { - struct ktermios tmp_termios; struct usb_serial *serial = port->serial; struct pl2303_serial_private *spriv = usb_get_serial_data(serial); int result; @@ -508,7 +508,7 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) /* Setup termios */ if (tty) - pl2303_set_termios(tty, port, &tmp_termios); + pl2303_set_termios(tty, port, NULL); result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) { -- cgit v0.10.2 From d62840995a99c9766803d54e9d7923f247a1c1db Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Wed, 22 May 2013 02:41:36 -0700 Subject: trace: Allow idle-safe tracepoints to be called from irq __DECLARE_TRACE_RCU() currently creates an _rcuidle() tracepoint which may safely be invoked from what RCU considers to be an idle CPU. However, these _rcuidle() tracepoints may -not- be invoked from the handler of an irq taken from idle, because rcu_idle_enter() zeroes RCU's nesting-level counter, so that the rcu_irq_exit() returning to idle will trigger a WARN_ON_ONCE(). This commit therefore substitutes rcu_irq_enter() for rcu_idle_exit() and rcu_irq_exit() for rcu_idle_enter() in order to make the _rcuidle() tracepoints usable from irq handlers as well as from process context. Reported-by: Dave Jones Signed-off-by: Paul E. McKenney Cc: Steven Rostedt diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h index 2f322c3..f8e084d 100644 --- a/include/linux/tracepoint.h +++ b/include/linux/tracepoint.h @@ -145,8 +145,8 @@ static inline void tracepoint_synchronize_unregister(void) TP_PROTO(data_proto), \ TP_ARGS(data_args), \ TP_CONDITION(cond), \ - rcu_idle_exit(), \ - rcu_idle_enter()); \ + rcu_irq_enter(), \ + rcu_irq_exit()); \ } #else #define __DECLARE_TRACE_RCU(name, proto, args, cond, data_proto, data_args) -- cgit v0.10.2 From 016a8d5be6ddcc72ef0432d82d9f6fa34f61b907 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 28 May 2013 17:32:53 -0400 Subject: rcu: Don't call wakeup() with rcu_node structure ->lock held This commit fixes a lockdep-detected deadlock by moving a wake_up() call out from a rnp->lock critical section. Please see below for the long version of this story. On Tue, 2013-05-28 at 16:13 -0400, Dave Jones wrote: > [12572.705832] ====================================================== > [12572.750317] [ INFO: possible circular locking dependency detected ] > [12572.796978] 3.10.0-rc3+ #39 Not tainted > [12572.833381] ------------------------------------------------------- > [12572.862233] trinity-child17/31341 is trying to acquire lock: > [12572.870390] (rcu_node_0){..-.-.}, at: [] rcu_read_unlock_special+0x9f/0x4c0 > [12572.878859] > but task is already holding lock: > [12572.894894] (&ctx->lock){-.-...}, at: [] perf_lock_task_context+0x7d/0x2d0 > [12572.903381] > which lock already depends on the new lock. > > [12572.927541] > the existing dependency chain (in reverse order) is: > [12572.943736] > -> #4 (&ctx->lock){-.-...}: > [12572.960032] [] lock_acquire+0x91/0x1f0 > [12572.968337] [] _raw_spin_lock+0x40/0x80 > [12572.976633] [] __perf_event_task_sched_out+0x2e7/0x5e0 > [12572.984969] [] perf_event_task_sched_out+0x93/0xa0 > [12572.993326] [] __schedule+0x2cf/0x9c0 > [12573.001652] [] schedule_user+0x2e/0x70 > [12573.009998] [] retint_careful+0x12/0x2e > [12573.018321] > -> #3 (&rq->lock){-.-.-.}: > [12573.034628] [] lock_acquire+0x91/0x1f0 > [12573.042930] [] _raw_spin_lock+0x40/0x80 > [12573.051248] [] wake_up_new_task+0xb7/0x260 > [12573.059579] [] do_fork+0x105/0x470 > [12573.067880] [] kernel_thread+0x26/0x30 > [12573.076202] [] rest_init+0x23/0x140 > [12573.084508] [] start_kernel+0x3f1/0x3fe > [12573.092852] [] x86_64_start_reservations+0x2a/0x2c > [12573.101233] [] x86_64_start_kernel+0xcc/0xcf > [12573.109528] > -> #2 (&p->pi_lock){-.-.-.}: > [12573.125675] [] lock_acquire+0x91/0x1f0 > [12573.133829] [] _raw_spin_lock_irqsave+0x4b/0x90 > [12573.141964] [] try_to_wake_up+0x31/0x320 > [12573.150065] [] default_wake_function+0x12/0x20 > [12573.158151] [] autoremove_wake_function+0x18/0x40 > [12573.166195] [] __wake_up_common+0x58/0x90 > [12573.174215] [] __wake_up+0x39/0x50 > [12573.182146] [] rcu_start_gp_advanced.isra.11+0x4a/0x50 > [12573.190119] [] rcu_start_future_gp+0x1c9/0x1f0 > [12573.198023] [] rcu_nocb_kthread+0x114/0x930 > [12573.205860] [] kthread+0xed/0x100 > [12573.213656] [] ret_from_fork+0x7c/0xb0 > [12573.221379] > -> #1 (&rsp->gp_wq){..-.-.}: > [12573.236329] [] lock_acquire+0x91/0x1f0 > [12573.243783] [] _raw_spin_lock_irqsave+0x4b/0x90 > [12573.251178] [] __wake_up+0x23/0x50 > [12573.258505] [] rcu_start_gp_advanced.isra.11+0x4a/0x50 > [12573.265891] [] rcu_start_future_gp+0x1c9/0x1f0 > [12573.273248] [] rcu_nocb_kthread+0x114/0x930 > [12573.280564] [] kthread+0xed/0x100 > [12573.287807] [] ret_from_fork+0x7c/0xb0 Notice the above call chain. rcu_start_future_gp() is called with the rnp->lock held. Then it calls rcu_start_gp_advance, which does a wakeup. You can't do wakeups while holding the rnp->lock, as that would mean that you could not do a rcu_read_unlock() while holding the rq lock, or any lock that was taken while holding the rq lock. This is because... (See below). > [12573.295067] > -> #0 (rcu_node_0){..-.-.}: > [12573.309293] [] __lock_acquire+0x1786/0x1af0 > [12573.316568] [] lock_acquire+0x91/0x1f0 > [12573.323825] [] _raw_spin_lock+0x40/0x80 > [12573.331081] [] rcu_read_unlock_special+0x9f/0x4c0 > [12573.338377] [] __rcu_read_unlock+0x96/0xa0 > [12573.345648] [] perf_lock_task_context+0x143/0x2d0 > [12573.352942] [] find_get_context+0x4e/0x1f0 > [12573.360211] [] SYSC_perf_event_open+0x514/0xbd0 > [12573.367514] [] SyS_perf_event_open+0x9/0x10 > [12573.374816] [] tracesys+0xdd/0xe2 Notice the above trace. perf took its own ctx->lock, which can be taken while holding the rq lock. While holding this lock, it did a rcu_read_unlock(). The perf_lock_task_context() basically looks like: rcu_read_lock(); raw_spin_lock(ctx->lock); rcu_read_unlock(); Now, what looks to have happened, is that we scheduled after taking that first rcu_read_lock() but before taking the spin lock. When we scheduled back in and took the ctx->lock, the following rcu_read_unlock() triggered the "special" code. The rcu_read_unlock_special() takes the rnp->lock, which gives us a possible deadlock scenario. CPU0 CPU1 CPU2 ---- ---- ---- rcu_nocb_kthread() lock(rq->lock); lock(ctx->lock); lock(rnp->lock); wake_up(); lock(rq->lock); rcu_read_unlock(); rcu_read_unlock_special(); lock(rnp->lock); lock(ctx->lock); **** DEADLOCK **** > [12573.382068] > other info that might help us debug this: > > [12573.403229] Chain exists of: > rcu_node_0 --> &rq->lock --> &ctx->lock > > [12573.424471] Possible unsafe locking scenario: > > [12573.438499] CPU0 CPU1 > [12573.445599] ---- ---- > [12573.452691] lock(&ctx->lock); > [12573.459799] lock(&rq->lock); > [12573.467010] lock(&ctx->lock); > [12573.474192] lock(rcu_node_0); > [12573.481262] > *** DEADLOCK *** > > [12573.501931] 1 lock held by trinity-child17/31341: > [12573.508990] #0: (&ctx->lock){-.-...}, at: [] perf_lock_task_context+0x7d/0x2d0 > [12573.516475] > stack backtrace: > [12573.530395] CPU: 1 PID: 31341 Comm: trinity-child17 Not tainted 3.10.0-rc3+ #39 > [12573.545357] ffffffff825b4f90 ffff880219f1dbc0 ffffffff816e375b ffff880219f1dc00 > [12573.552868] ffffffff816dfa5d ffff880219f1dc50 ffff88023ce4d1f8 ffff88023ce4ca40 > [12573.560353] 0000000000000001 0000000000000001 ffff88023ce4d1f8 ffff880219f1dcc0 > [12573.567856] Call Trace: > [12573.575011] [] dump_stack+0x19/0x1b > [12573.582284] [] print_circular_bug+0x200/0x20f > [12573.589637] [] __lock_acquire+0x1786/0x1af0 > [12573.596982] [] ? sched_clock_cpu+0xb5/0x100 > [12573.604344] [] lock_acquire+0x91/0x1f0 > [12573.611652] [] ? rcu_read_unlock_special+0x9f/0x4c0 > [12573.619030] [] _raw_spin_lock+0x40/0x80 > [12573.626331] [] ? rcu_read_unlock_special+0x9f/0x4c0 > [12573.633671] [] rcu_read_unlock_special+0x9f/0x4c0 > [12573.640992] [] ? perf_lock_task_context+0x7d/0x2d0 > [12573.648330] [] ? put_lock_stats.isra.29+0xe/0x40 > [12573.655662] [] ? delay_tsc+0x90/0xe0 > [12573.662964] [] __rcu_read_unlock+0x96/0xa0 > [12573.670276] [] perf_lock_task_context+0x143/0x2d0 > [12573.677622] [] ? __perf_event_enable+0x370/0x370 > [12573.684981] [] find_get_context+0x4e/0x1f0 > [12573.692358] [] SYSC_perf_event_open+0x514/0xbd0 > [12573.699753] [] ? get_parent_ip+0xd/0x50 > [12573.707135] [] ? trace_hardirqs_on_caller+0xfd/0x1c0 > [12573.714599] [] SyS_perf_event_open+0x9/0x10 > [12573.721996] [] tracesys+0xdd/0xe2 This commit delays the wakeup via irq_work(), which is what perf and ftrace use to perform wakeups in critical sections. Reported-by: Dave Jones Signed-off-by: Steven Rostedt Signed-off-by: Paul E. McKenney diff --git a/init/Kconfig b/init/Kconfig index 9d3a788..2d9b831 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -431,6 +431,7 @@ choice config TREE_RCU bool "Tree-based hierarchical RCU" depends on !PREEMPT && SMP + select IRQ_WORK help This option selects the RCU implementation that is designed for very large SMP system with hundreds or diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 16ea679..b61d20c 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -1613,6 +1613,14 @@ static int __noreturn rcu_gp_kthread(void *arg) } } +static void rsp_wakeup(struct irq_work *work) +{ + struct rcu_state *rsp = container_of(work, struct rcu_state, wakeup_work); + + /* Wake up rcu_gp_kthread() to start the grace period. */ + wake_up(&rsp->gp_wq); +} + /* * Start a new RCU grace period if warranted, re-initializing the hierarchy * in preparation for detecting the next grace period. The caller must hold @@ -1637,8 +1645,12 @@ rcu_start_gp_advanced(struct rcu_state *rsp, struct rcu_node *rnp, } rsp->gp_flags = RCU_GP_FLAG_INIT; - /* Wake up rcu_gp_kthread() to start the grace period. */ - wake_up(&rsp->gp_wq); + /* + * We can't do wakeups while holding the rnp->lock, as that + * could cause possible deadlocks with the rq->lock. Deter + * the wakeup to interrupt context. + */ + irq_work_queue(&rsp->wakeup_work); } /* @@ -3235,6 +3247,7 @@ static void __init rcu_init_one(struct rcu_state *rsp, rsp->rda = rda; init_waitqueue_head(&rsp->gp_wq); + init_irq_work(&rsp->wakeup_work, rsp_wakeup); rnp = rsp->level[rcu_num_lvls - 1]; for_each_possible_cpu(i) { while (i > rnp->grphi) diff --git a/kernel/rcutree.h b/kernel/rcutree.h index da77a8f..4df5034 100644 --- a/kernel/rcutree.h +++ b/kernel/rcutree.h @@ -27,6 +27,7 @@ #include #include #include +#include /* * Define shape of hierarchy based on NR_CPUS, CONFIG_RCU_FANOUT, and @@ -442,6 +443,7 @@ struct rcu_state { char *name; /* Name of structure. */ char abbr; /* Abbreviated name. */ struct list_head flavors; /* List of RCU flavors. */ + struct irq_work wakeup_work; /* Postponed wakeups */ }; /* Values for rcu_state structure's gp_flags field. */ -- cgit v0.10.2 From 971394f389992f8462c4e5ae0e3b49a10a9534a3 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Sun, 2 Jun 2013 07:13:57 -0700 Subject: rcu: Fix deadlock with CPU hotplug, RCU GP init, and timer migration In Steven Rostedt's words: > I've been debugging the last couple of days why my tests have been > locking up. One of my tracing tests, runs all available tracers. The > lockup always happened with the mmiotrace, which is used to trace > interactions between priority drivers and the kernel. But to do this > easily, when the tracer gets registered, it disables all but the boot > CPUs. The lockup always happened after it got done disabling the CPUs. > > Then I decided to try this: > > while :; do > for i in 1 2 3; do > echo 0 > /sys/devices/system/cpu/cpu$i/online > done > for i in 1 2 3; do > echo 1 > /sys/devices/system/cpu/cpu$i/online > done > done > > Well, sure enough, that locked up too, with the same users. Doing a > sysrq-w (showing all blocked tasks): > > [ 2991.344562] task PC stack pid father > [ 2991.344562] rcu_preempt D ffff88007986fdf8 0 10 2 0x00000000 > [ 2991.344562] ffff88007986fc98 0000000000000002 ffff88007986fc48 0000000000000908 > [ 2991.344562] ffff88007986c280 ffff88007986ffd8 ffff88007986ffd8 00000000001d3c80 > [ 2991.344562] ffff880079248a40 ffff88007986c280 0000000000000000 00000000fffd4295 > [ 2991.344562] Call Trace: > [ 2991.344562] [] schedule+0x64/0x66 > [ 2991.344562] [] schedule_timeout+0xbc/0xf9 > [ 2991.344562] [] ? ftrace_call+0x5/0x2f > [ 2991.344562] [] ? cascade+0xa8/0xa8 > [ 2991.344562] [] schedule_timeout_uninterruptible+0x1e/0x20 > [ 2991.344562] [] rcu_gp_kthread+0x502/0x94b > [ 2991.344562] [] ? __init_waitqueue_head+0x50/0x50 > [ 2991.344562] [] ? rcu_gp_fqs+0x64/0x64 > [ 2991.344562] [] kthread+0xb1/0xb9 > [ 2991.344562] [] ? lock_release_holdtime.part.23+0x4e/0x55 > [ 2991.344562] [] ? __init_kthread_worker+0x58/0x58 > [ 2991.344562] [] ret_from_fork+0x7c/0xb0 > [ 2991.344562] [] ? __init_kthread_worker+0x58/0x58 > [ 2991.344562] kworker/0:1 D ffffffff81a30680 0 47 2 0x00000000 > [ 2991.344562] Workqueue: events cpuset_hotplug_workfn > [ 2991.344562] ffff880078dbbb58 0000000000000002 0000000000000006 00000000000000d8 > [ 2991.344562] ffff880078db8100 ffff880078dbbfd8 ffff880078dbbfd8 00000000001d3c80 > [ 2991.344562] ffff8800779ca5c0 ffff880078db8100 ffffffff81541fcf 0000000000000000 > [ 2991.344562] Call Trace: > [ 2991.344562] [] ? __mutex_lock_common+0x3d4/0x609 > [ 2991.344562] [] schedule+0x64/0x66 > [ 2991.344562] [] schedule_preempt_disabled+0x18/0x24 > [ 2991.344562] [] __mutex_lock_common+0x3d4/0x609 > [ 2991.344562] [] ? get_online_cpus+0x3c/0x50 > [ 2991.344562] [] ? get_online_cpus+0x3c/0x50 > [ 2991.344562] [] mutex_lock_nested+0x3b/0x40 > [ 2991.344562] [] get_online_cpus+0x3c/0x50 > [ 2991.344562] [] rebuild_sched_domains_locked+0x6e/0x3a8 > [ 2991.344562] [] rebuild_sched_domains+0x1c/0x2a > [ 2991.344562] [] cpuset_hotplug_workfn+0x1c7/0x1d3 > [ 2991.344562] [] ? cpuset_hotplug_workfn+0x5/0x1d3 > [ 2991.344562] [] process_one_work+0x2d4/0x4d1 > [ 2991.344562] [] ? process_one_work+0x207/0x4d1 > [ 2991.344562] [] worker_thread+0x2e7/0x3b5 > [ 2991.344562] [] ? rescuer_thread+0x332/0x332 > [ 2991.344562] [] kthread+0xb1/0xb9 > [ 2991.344562] [] ? __init_kthread_worker+0x58/0x58 > [ 2991.344562] [] ret_from_fork+0x7c/0xb0 > [ 2991.344562] [] ? __init_kthread_worker+0x58/0x58 > [ 2991.344562] bash D ffffffff81a4aa80 0 2618 2612 0x10000000 > [ 2991.344562] ffff8800379abb58 0000000000000002 0000000000000006 0000000000000c2c > [ 2991.344562] ffff880077fea140 ffff8800379abfd8 ffff8800379abfd8 00000000001d3c80 > [ 2991.344562] ffff8800779ca5c0 ffff880077fea140 ffffffff81541fcf 0000000000000000 > [ 2991.344562] Call Trace: > [ 2991.344562] [] ? __mutex_lock_common+0x3d4/0x609 > [ 2991.344562] [] schedule+0x64/0x66 > [ 2991.344562] [] schedule_preempt_disabled+0x18/0x24 > [ 2991.344562] [] __mutex_lock_common+0x3d4/0x609 > [ 2991.344562] [] ? rcu_cpu_notify+0x2f5/0x86e > [ 2991.344562] [] ? rcu_cpu_notify+0x2f5/0x86e > [ 2991.344562] [] mutex_lock_nested+0x3b/0x40 > [ 2991.344562] [] rcu_cpu_notify+0x2f5/0x86e > [ 2991.344562] [] ? __lock_is_held+0x32/0x53 > [ 2991.344562] [] notifier_call_chain+0x6b/0x98 > [ 2991.344562] [] __raw_notifier_call_chain+0xe/0x10 > [ 2991.344562] [] __cpu_notify+0x20/0x32 > [ 2991.344562] [] cpu_notify_nofail+0x17/0x36 > [ 2991.344562] [] _cpu_down+0x154/0x259 > [ 2991.344562] [] cpu_down+0x2d/0x3a > [ 2991.344562] [] store_online+0x4e/0xe7 > [ 2991.344562] [] dev_attr_store+0x20/0x22 > [ 2991.344562] [] sysfs_write_file+0x108/0x144 > [ 2991.344562] [] vfs_write+0xfd/0x158 > [ 2991.344562] [] SyS_write+0x5c/0x83 > [ 2991.344562] [] tracesys+0xdd/0xe2 > > As well as held locks: > > [ 3034.728033] Showing all locks held in the system: > [ 3034.728033] 1 lock held by rcu_preempt/10: > [ 3034.728033] #0: (rcu_preempt_state.onoff_mutex){+.+...}, at: [] rcu_gp_kthread+0x167/0x94b > [ 3034.728033] 4 locks held by kworker/0:1/47: > [ 3034.728033] #0: (events){.+.+.+}, at: [] process_one_work+0x207/0x4d1 > [ 3034.728033] #1: (cpuset_hotplug_work){+.+.+.}, at: [] process_one_work+0x207/0x4d1 > [ 3034.728033] #2: (cpuset_mutex){+.+.+.}, at: [] rebuild_sched_domains+0x17/0x2a > [ 3034.728033] #3: (cpu_hotplug.lock){+.+.+.}, at: [] get_online_cpus+0x3c/0x50 > [ 3034.728033] 1 lock held by mingetty/2563: > [ 3034.728033] #0: (&ldata->atomic_read_lock){+.+...}, at: [] n_tty_read+0x252/0x7e8 > [ 3034.728033] 1 lock held by mingetty/2565: > [ 3034.728033] #0: (&ldata->atomic_read_lock){+.+...}, at: [] n_tty_read+0x252/0x7e8 > [ 3034.728033] 1 lock held by mingetty/2569: > [ 3034.728033] #0: (&ldata->atomic_read_lock){+.+...}, at: [] n_tty_read+0x252/0x7e8 > [ 3034.728033] 1 lock held by mingetty/2572: > [ 3034.728033] #0: (&ldata->atomic_read_lock){+.+...}, at: [] n_tty_read+0x252/0x7e8 > [ 3034.728033] 1 lock held by mingetty/2575: > [ 3034.728033] #0: (&ldata->atomic_read_lock){+.+...}, at: [] n_tty_read+0x252/0x7e8 > [ 3034.728033] 7 locks held by bash/2618: > [ 3034.728033] #0: (sb_writers#5){.+.+.+}, at: [] file_start_write+0x2a/0x2c > [ 3034.728033] #1: (&buffer->mutex#2){+.+.+.}, at: [] sysfs_write_file+0x3c/0x144 > [ 3034.728033] #2: (s_active#54){.+.+.+}, at: [] sysfs_write_file+0xe7/0x144 > [ 3034.728033] #3: (x86_cpu_hotplug_driver_mutex){+.+.+.}, at: [] cpu_hotplug_driver_lock+0x17/0x19 > [ 3034.728033] #4: (cpu_add_remove_lock){+.+.+.}, at: [] cpu_maps_update_begin+0x17/0x19 > [ 3034.728033] #5: (cpu_hotplug.lock){+.+.+.}, at: [] cpu_hotplug_begin+0x2c/0x6d > [ 3034.728033] #6: (rcu_preempt_state.onoff_mutex){+.+...}, at: [] rcu_cpu_notify+0x2f5/0x86e > [ 3034.728033] 1 lock held by bash/2980: > [ 3034.728033] #0: (&ldata->atomic_read_lock){+.+...}, at: [] n_tty_read+0x252/0x7e8 > > Things looked a little weird. Also, this is a deadlock that lockdep did > not catch. But what we have here does not look like a circular lock > issue: > > Bash is blocked in rcu_cpu_notify(): > > 1961 /* Exclude any attempts to start a new grace period. */ > 1962 mutex_lock(&rsp->onoff_mutex); > > > kworker is blocked in get_online_cpus(), which makes sense as we are > currently taking down a CPU. > > But rcu_preempt is not blocked on anything. It is simply sleeping in > rcu_gp_kthread (really rcu_gp_init) here: > > 1453 #ifdef CONFIG_PROVE_RCU_DELAY > 1454 if ((prandom_u32() % (rcu_num_nodes * 8)) == 0 && > 1455 system_state == SYSTEM_RUNNING) > 1456 schedule_timeout_uninterruptible(2); > 1457 #endif /* #ifdef CONFIG_PROVE_RCU_DELAY */ > > And it does this while holding the onoff_mutex that bash is waiting for. > > Doing a function trace, it showed me where it happened: > > [ 125.940066] rcu_pree-10 3.... 28384115273: schedule_timeout_uninterruptible <-rcu_gp_kthread > [...] > [ 125.940066] rcu_pree-10 3d..3 28384202439: sched_switch: prev_comm=rcu_preempt prev_pid=10 prev_prio=120 prev_state=D ==> next_comm=watchdog/3 next_pid=38 next_prio=120 > > The watchdog ran, and then: > > [ 125.940066] watchdog-38 3d..3 28384692863: sched_switch: prev_comm=watchdog/3 prev_pid=38 prev_prio=120 prev_state=P ==> next_comm=modprobe next_pid=2848 next_prio=118 > > Not sure what modprobe was doing, but shortly after that: > > [ 125.940066] modprobe-2848 3d..3 28385041749: sched_switch: prev_comm=modprobe prev_pid=2848 prev_prio=118 prev_state=R+ ==> next_comm=migration/3 next_pid=40 next_prio=0 > > Where the migration thread took down the CPU: > > [ 125.940066] migratio-40 3d..3 28389148276: sched_switch: prev_comm=migration/3 prev_pid=40 prev_prio=0 prev_state=P ==> next_comm=swapper/3 next_pid=0 next_prio=120 > > which finally did: > > [ 125.940066] -0 3...1 28389282142: arch_cpu_idle_dead <-cpu_startup_entry > [ 125.940066] -0 3...1 28389282548: native_play_dead <-arch_cpu_idle_dead > [ 125.940066] -0 3...1 28389282924: play_dead_common <-native_play_dead > [ 125.940066] -0 3...1 28389283468: idle_task_exit <-play_dead_common > [ 125.940066] -0 3...1 28389284644: amd_e400_remove_cpu <-play_dead_common > > > CPU 3 is now offline, the rcu_preempt thread that ran on CPU 3 is still > doing a schedule_timeout_uninterruptible() and it registered it's > timeout to the timer base for CPU 3. You would think that it would get > migrated right? The issue here is that the timer migration happens at > the CPU notifier for CPU_DEAD. The problem is that the rcu notifier for > CPU_DOWN is blocked waiting for the onoff_mutex to be released, which is > held by the thread that just put itself into a uninterruptible sleep, > that wont wake up until the CPU_DEAD notifier of the timer > infrastructure is called, which wont happen until the rcu notifier > finishes. Here's our deadlock! This commit breaks this deadlock cycle by substituting a shorter udelay() for the previous schedule_timeout_uninterruptible(), while at the same time increasing the probability of the delay. This maintains the intensity of the testing. Reported-by: Steven Rostedt Signed-off-by: Paul E. McKenney Tested-by: Steven Rostedt diff --git a/kernel/rcutree.c b/kernel/rcutree.c index b61d20c..3538001 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -1451,9 +1451,9 @@ static int rcu_gp_init(struct rcu_state *rsp) rnp->grphi, rnp->qsmask); raw_spin_unlock_irq(&rnp->lock); #ifdef CONFIG_PROVE_RCU_DELAY - if ((prandom_u32() % (rcu_num_nodes * 8)) == 0 && + if ((prandom_u32() % (rcu_num_nodes + 1)) == 0 && system_state == SYSTEM_RUNNING) - schedule_timeout_uninterruptible(2); + udelay(200); #endif /* #ifdef CONFIG_PROVE_RCU_DELAY */ cond_resched(); } -- cgit v0.10.2 From f8b8404337de4e2466e2e1139ea68b1f8295974f Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Sat, 1 Jun 2013 16:06:20 -0400 Subject: Modify UEFI anti-bricking code This patch reworks the UEFI anti-bricking code, including an effective reversion of cc5a080c and 31ff2f20. It turns out that calling QueryVariableInfo() from boot services results in some firmware implementations jumping to physical addresses even after entering virtual mode, so until we have 1:1 mappings for UEFI runtime space this isn't going to work so well. Reverting these gets us back to the situation where we'd refuse to create variables on some systems because they classify deleted variables as "used" until the firmware triggers a garbage collection run, which they won't do until they reach a lower threshold. This results in it being impossible to install a bootloader, which is unhelpful. Feedback from Samsung indicates that the firmware doesn't need more than 5KB of storage space for its own purposes, so that seems like a reasonable threshold. However, there's still no guarantee that a platform will attempt garbage collection merely because it drops below this threshold. It seems that this is often only triggered if an attempt to write generates a genuine EFI_OUT_OF_RESOURCES error. We can force that by attempting to create a variable larger than the remaining space. This should fail, but if it somehow succeeds we can then immediately delete it. I've tested this on the UEFI machines I have available, but I don't have a Samsung and so can't verify that it avoids the bricking problem. Signed-off-by: Matthew Garrett Signed-off-by: Lee, Chun-Y [ dummy variable cleanup ] Cc: Signed-off-by: Matt Fleming diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c index 35ee62f..c205035 100644 --- a/arch/x86/boot/compressed/eboot.c +++ b/arch/x86/boot/compressed/eboot.c @@ -251,51 +251,6 @@ static void find_bits(unsigned long mask, u8 *pos, u8 *size) *size = len; } -static efi_status_t setup_efi_vars(struct boot_params *params) -{ - struct setup_data *data; - struct efi_var_bootdata *efidata; - u64 store_size, remaining_size, var_size; - efi_status_t status; - - if (sys_table->runtime->hdr.revision < EFI_2_00_SYSTEM_TABLE_REVISION) - return EFI_UNSUPPORTED; - - data = (struct setup_data *)(unsigned long)params->hdr.setup_data; - - while (data && data->next) - data = (struct setup_data *)(unsigned long)data->next; - - status = efi_call_phys4((void *)sys_table->runtime->query_variable_info, - EFI_VARIABLE_NON_VOLATILE | - EFI_VARIABLE_BOOTSERVICE_ACCESS | - EFI_VARIABLE_RUNTIME_ACCESS, &store_size, - &remaining_size, &var_size); - - if (status != EFI_SUCCESS) - return status; - - status = efi_call_phys3(sys_table->boottime->allocate_pool, - EFI_LOADER_DATA, sizeof(*efidata), &efidata); - - if (status != EFI_SUCCESS) - return status; - - efidata->data.type = SETUP_EFI_VARS; - efidata->data.len = sizeof(struct efi_var_bootdata) - - sizeof(struct setup_data); - efidata->data.next = 0; - efidata->store_size = store_size; - efidata->remaining_size = remaining_size; - efidata->max_var_size = var_size; - - if (data) - data->next = (unsigned long)efidata; - else - params->hdr.setup_data = (unsigned long)efidata; - -} - static efi_status_t setup_efi_pci(struct boot_params *params) { efi_pci_io_protocol *pci; @@ -1202,8 +1157,6 @@ struct boot_params *efi_main(void *handle, efi_system_table_t *_table, setup_graphics(boot_params); - setup_efi_vars(boot_params); - setup_efi_pci(boot_params); status = efi_call_phys3(sys_table->boottime->allocate_pool, diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h index 2fb5d58..60c89f3 100644 --- a/arch/x86/include/asm/efi.h +++ b/arch/x86/include/asm/efi.h @@ -102,13 +102,6 @@ extern void efi_call_phys_epilog(void); extern void efi_unmap_memmap(void); extern void efi_memory_uc(u64 addr, unsigned long size); -struct efi_var_bootdata { - struct setup_data data; - u64 store_size; - u64 remaining_size; - u64 max_var_size; -}; - #ifdef CONFIG_EFI static inline bool efi_is_native(void) diff --git a/arch/x86/include/uapi/asm/bootparam.h b/arch/x86/include/uapi/asm/bootparam.h index 0874424..c15ddaf 100644 --- a/arch/x86/include/uapi/asm/bootparam.h +++ b/arch/x86/include/uapi/asm/bootparam.h @@ -6,7 +6,6 @@ #define SETUP_E820_EXT 1 #define SETUP_DTB 2 #define SETUP_PCI 3 -#define SETUP_EFI_VARS 4 /* ram_size flags */ #define RAMDISK_IMAGE_START_MASK 0x07FF diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 82089d8..5ae2eb0 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -42,7 +42,6 @@ #include #include #include -#include #include #include @@ -54,12 +53,12 @@ #define EFI_DEBUG 1 -/* - * There's some additional metadata associated with each - * variable. Intel's reference implementation is 60 bytes - bump that - * to account for potential alignment constraints - */ -#define VAR_METADATA_SIZE 64 +#define EFI_MIN_RESERVE 5120 + +#define EFI_DUMMY_GUID \ + EFI_GUID(0x4424ac57, 0xbe4b, 0x47dd, 0x9e, 0x97, 0xed, 0x50, 0xf0, 0x9f, 0x92, 0xa9) + +static efi_char16_t efi_dummy_name[6] = { 'D', 'U', 'M', 'M', 'Y', 0 }; struct efi __read_mostly efi = { .mps = EFI_INVALID_TABLE_ADDR, @@ -79,13 +78,6 @@ struct efi_memory_map memmap; static struct efi efi_phys __initdata; static efi_system_table_t efi_systab __initdata; -static u64 efi_var_store_size; -static u64 efi_var_remaining_size; -static u64 efi_var_max_var_size; -static u64 boot_used_size; -static u64 boot_var_size; -static u64 active_size; - unsigned long x86_efi_facility; /* @@ -188,53 +180,8 @@ static efi_status_t virt_efi_get_next_variable(unsigned long *name_size, efi_char16_t *name, efi_guid_t *vendor) { - efi_status_t status; - static bool finished = false; - static u64 var_size; - - status = efi_call_virt3(get_next_variable, - name_size, name, vendor); - - if (status == EFI_NOT_FOUND) { - finished = true; - if (var_size < boot_used_size) { - boot_var_size = boot_used_size - var_size; - active_size += boot_var_size; - } else { - printk(KERN_WARNING FW_BUG "efi: Inconsistent initial sizes\n"); - } - } - - if (boot_used_size && !finished) { - unsigned long size = 0; - u32 attr; - efi_status_t s; - void *tmp; - - s = virt_efi_get_variable(name, vendor, &attr, &size, NULL); - - if (s != EFI_BUFFER_TOO_SMALL || !size) - return status; - - tmp = kmalloc(size, GFP_ATOMIC); - - if (!tmp) - return status; - - s = virt_efi_get_variable(name, vendor, &attr, &size, tmp); - - if (s == EFI_SUCCESS && (attr & EFI_VARIABLE_NON_VOLATILE)) { - var_size += size; - var_size += ucs2_strsize(name, 1024); - active_size += size; - active_size += VAR_METADATA_SIZE; - active_size += ucs2_strsize(name, 1024); - } - - kfree(tmp); - } - - return status; + return efi_call_virt3(get_next_variable, + name_size, name, vendor); } static efi_status_t virt_efi_set_variable(efi_char16_t *name, @@ -243,34 +190,9 @@ static efi_status_t virt_efi_set_variable(efi_char16_t *name, unsigned long data_size, void *data) { - efi_status_t status; - u32 orig_attr = 0; - unsigned long orig_size = 0; - - status = virt_efi_get_variable(name, vendor, &orig_attr, &orig_size, - NULL); - - if (status != EFI_BUFFER_TOO_SMALL) - orig_size = 0; - - status = efi_call_virt5(set_variable, - name, vendor, attr, - data_size, data); - - if (status == EFI_SUCCESS) { - if (orig_size) { - active_size -= orig_size; - active_size -= ucs2_strsize(name, 1024); - active_size -= VAR_METADATA_SIZE; - } - if (data_size) { - active_size += data_size; - active_size += ucs2_strsize(name, 1024); - active_size += VAR_METADATA_SIZE; - } - } - - return status; + return efi_call_virt5(set_variable, + name, vendor, attr, + data_size, data); } static efi_status_t virt_efi_query_variable_info(u32 attr, @@ -786,9 +708,6 @@ void __init efi_init(void) char vendor[100] = "unknown"; int i = 0; void *tmp; - struct setup_data *data; - struct efi_var_bootdata *efi_var_data; - u64 pa_data; #ifdef CONFIG_X86_32 if (boot_params.efi_info.efi_systab_hi || @@ -806,22 +725,6 @@ void __init efi_init(void) if (efi_systab_init(efi_phys.systab)) return; - pa_data = boot_params.hdr.setup_data; - while (pa_data) { - data = early_ioremap(pa_data, sizeof(*efi_var_data)); - if (data->type == SETUP_EFI_VARS) { - efi_var_data = (struct efi_var_bootdata *)data; - - efi_var_store_size = efi_var_data->store_size; - efi_var_remaining_size = efi_var_data->remaining_size; - efi_var_max_var_size = efi_var_data->max_var_size; - } - pa_data = data->next; - early_iounmap(data, sizeof(*efi_var_data)); - } - - boot_used_size = efi_var_store_size - efi_var_remaining_size; - set_bit(EFI_SYSTEM_TABLES, &x86_efi_facility); /* @@ -1085,6 +988,13 @@ void __init efi_enter_virtual_mode(void) runtime_code_page_mkexec(); kfree(new_memmap); + + /* clean DUMMY object */ + efi.set_variable(efi_dummy_name, &EFI_DUMMY_GUID, + EFI_VARIABLE_NON_VOLATILE | + EFI_VARIABLE_BOOTSERVICE_ACCESS | + EFI_VARIABLE_RUNTIME_ACCESS, + 0, NULL); } /* @@ -1136,33 +1046,65 @@ efi_status_t efi_query_variable_store(u32 attributes, unsigned long size) efi_status_t status; u64 storage_size, remaining_size, max_size; + if (!(attributes & EFI_VARIABLE_NON_VOLATILE)) + return 0; + status = efi.query_variable_info(attributes, &storage_size, &remaining_size, &max_size); if (status != EFI_SUCCESS) return status; - if (!max_size && remaining_size > size) - printk_once(KERN_ERR FW_BUG "Broken EFI implementation" - " is returning MaxVariableSize=0\n"); /* * Some firmware implementations refuse to boot if there's insufficient * space in the variable store. We account for that by refusing the * write if permitting it would reduce the available space to under - * 50%. However, some firmware won't reclaim variable space until - * after the used (not merely the actively used) space drops below - * a threshold. We can approximate that case with the value calculated - * above. If both the firmware and our calculations indicate that the - * available space would drop below 50%, refuse the write. + * 5KB. This figure was provided by Samsung, so should be safe. */ + if ((remaining_size - size < EFI_MIN_RESERVE) && + !efi_no_storage_paranoia) { + + /* + * Triggering garbage collection may require that the firmware + * generate a real EFI_OUT_OF_RESOURCES error. We can force + * that by attempting to use more space than is available. + */ + unsigned long dummy_size = remaining_size + 1024; + void *dummy = kmalloc(dummy_size, GFP_ATOMIC); + + status = efi.set_variable(efi_dummy_name, &EFI_DUMMY_GUID, + EFI_VARIABLE_NON_VOLATILE | + EFI_VARIABLE_BOOTSERVICE_ACCESS | + EFI_VARIABLE_RUNTIME_ACCESS, + dummy_size, dummy); + + if (status == EFI_SUCCESS) { + /* + * This should have failed, so if it didn't make sure + * that we delete it... + */ + efi.set_variable(efi_dummy_name, &EFI_DUMMY_GUID, + EFI_VARIABLE_NON_VOLATILE | + EFI_VARIABLE_BOOTSERVICE_ACCESS | + EFI_VARIABLE_RUNTIME_ACCESS, + 0, dummy); + } - if (!storage_size || size > remaining_size || - (max_size && size > max_size)) - return EFI_OUT_OF_RESOURCES; + /* + * The runtime code may now have triggered a garbage collection + * run, so check the variable info again + */ + status = efi.query_variable_info(attributes, &storage_size, + &remaining_size, &max_size); - if (!efi_no_storage_paranoia && - ((active_size + size + VAR_METADATA_SIZE > storage_size / 2) && - (remaining_size - size < storage_size / 2))) - return EFI_OUT_OF_RESOURCES; + if (status != EFI_SUCCESS) + return status; + + /* + * There still isn't enough room, so return an error + */ + if (remaining_size - size < EFI_MIN_RESERVE) + return EFI_OUT_OF_RESOURCES; + } return EFI_SUCCESS; } -- cgit v0.10.2 From 4364d5f96eed7994a2c625bd9216656e55fba0cb Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Wed, 5 Jun 2013 15:40:46 +0800 Subject: vhost_net: clear msg.control for non-zerocopy case during tx When we decide not use zero-copy, msg.control should be set to NULL otherwise macvtap/tap may set zerocopy callbacks which may decrease the kref of ubufs wrongly. Bug were introduced by commit cedb9bdce099206290a2bdd02ce47a7b253b6a84 (vhost-net: skip head management if no outstanding). This solves the following warnings: WARNING: at include/linux/kref.h:47 handle_tx+0x477/0x4b0 [vhost_net]() Modules linked in: vhost_net macvtap macvlan tun nfsd exportfs bridge stp llc openvswitch kvm_amd kvm bnx2 megaraid_sas [last unloaded: tun] CPU: 5 PID: 8670 Comm: vhost-8668 Not tainted 3.10.0-rc2+ #1566 Hardware name: Dell Inc. PowerEdge R715/00XHKG, BIOS 1.5.2 04/19/2011 ffffffffa0198323 ffff88007c9ebd08 ffffffff81796b73 ffff88007c9ebd48 ffffffff8103d66b 000000007b773e20 ffff8800779f0000 ffff8800779f43f0 ffff8800779f8418 000000000000015c 0000000000000062 ffff88007c9ebd58 Call Trace: [] dump_stack+0x19/0x1e [] warn_slowpath_common+0x6b/0xa0 [] warn_slowpath_null+0x15/0x20 [] handle_tx+0x477/0x4b0 [vhost_net] [] handle_tx_kick+0x10/0x20 [vhost_net] [] vhost_worker+0xfe/0x1a0 [vhost_net] [] ? vhost_attach_cgroups_work+0x30/0x30 [vhost_net] [] ? vhost_attach_cgroups_work+0x30/0x30 [vhost_net] [] kthread+0xc6/0xd0 [] ? kthread_freezable_should_stop+0x70/0x70 [] ret_from_fork+0x7c/0xb0 [] ? kthread_freezable_should_stop+0x70/0x70 Signed-off-by: Jason Wang Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c index 2b51e23..b07d96b 100644 --- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -436,7 +436,8 @@ static void handle_tx(struct vhost_net *net) kref_get(&ubufs->kref); } nvq->upend_idx = (nvq->upend_idx + 1) % UIO_MAXIOV; - } + } else + msg.msg_control = NULL; /* TODO: Check specific error and bomb out unless ENOBUFS? */ err = sock->ops->sendmsg(NULL, sock, &msg, len); if (unlikely(err < 0)) { -- cgit v0.10.2 From 92bb73ea2c434618a68a58a2f3a5c3fd0b660d18 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Wed, 5 Jun 2013 16:44:57 +0800 Subject: tuntap: fix a possible race between queue selection and changing queues Complier may generate codes that re-read the tun->numqueues during tun_select_queue(). This may be a race if vlan->numqueues were changed in the same time and can lead unexpected result (e.g. very huge value). We need prevent the compiler from generating such codes by adding an ACCESS_ONCE() to make sure tun->numqueues were only read once. Bug were introduced by commit c8d68e6be1c3b242f1c598595830890b65cea64a (tuntap: multiqueue support). Reported-by: Michael S. Tsirkin Cc: Michael S. Tsirkin Signed-off-by: Jason Wang Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 89776c5..b1cbfbc 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -352,7 +352,7 @@ static u16 tun_select_queue(struct net_device *dev, struct sk_buff *skb) u32 numqueues = 0; rcu_read_lock(); - numqueues = tun->numqueues; + numqueues = ACCESS_ONCE(tun->numqueues); txq = skb_get_rxhash(skb); if (txq) { -- cgit v0.10.2 From 39b72d89eb2bf74ec94773defece6890febba7a5 Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Fri, 17 May 2013 11:25:52 +0530 Subject: clk: exynos5250: Update cpufreq related clocks for EXYNOS5250 cpufreq driver for EXYNOS5250 is not a platform driver, hence we cannot currently pass the clock names through a device tree node. Instead, we need to make them available through a global alias. cpufreq driver for EXYNOS5250 requires four clocks - 'armclk', 'mout_cpu', 'mout_mpll' and 'mout_apll'. 'armclk' has already been defined with an alias, 'mout_cpu', 'mout_mpll' and 'mout_apll' are now defined with an alias. Signed-off-by: Tushar Behera Signed-off-by: Mike Turquette diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c index 5c97e75..05d099d 100644 --- a/drivers/clk/samsung/clk-exynos5250.c +++ b/drivers/clk/samsung/clk-exynos5250.c @@ -208,10 +208,10 @@ struct samsung_fixed_factor_clock exynos5250_fixed_factor_clks[] __initdata = { }; struct samsung_mux_clock exynos5250_mux_clks[] __initdata = { - MUX(none, "mout_apll", mout_apll_p, SRC_CPU, 0, 1), - MUX(none, "mout_cpu", mout_cpu_p, SRC_CPU, 16, 1), + MUX_A(none, "mout_apll", mout_apll_p, SRC_CPU, 0, 1, "mout_apll"), + MUX_A(none, "mout_cpu", mout_cpu_p, SRC_CPU, 16, 1, "mout_cpu"), MUX(none, "mout_mpll_fout", mout_mpll_fout_p, PLL_DIV2_SEL, 4, 1), - MUX(none, "sclk_mpll", mout_mpll_p, SRC_CORE1, 8, 1), + MUX_A(none, "sclk_mpll", mout_mpll_p, SRC_CORE1, 8, 1, "mout_mpll"), MUX(none, "mout_bpll_fout", mout_bpll_fout_p, PLL_DIV2_SEL, 0, 1), MUX(none, "sclk_bpll", mout_bpll_p, SRC_CDREX, 0, 1), MUX(none, "mout_vpllsrc", mout_vpllsrc_p, SRC_TOP2, 0, 1), -- cgit v0.10.2 From 589c603b2c591ed470a731ceda589e6d60b77b5f Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Fri, 17 May 2013 11:25:53 +0530 Subject: clk: exynos5250: Add sclk_mpll to the parent list of mout_cpu clock 'mout_mpll' is added the list of parent clocks for 'mout_cpu'. 'mout_mpll' is an alias to the clock 'sclk_mpll'. Hence 'sclk_mpll' should be added to the list of parent clocks. This results in an error when cpufreq driver for EXYNOS5250 tries to set 'mout_mpll' as a parent for 'mout_cpu'. clk_set_parent: clk sclk_mpll can not be parent of clk mout_cpu Signed-off-by: Tushar Behera Signed-off-by: Mike Turquette diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c index 05d099d..b6d79c0 100644 --- a/drivers/clk/samsung/clk-exynos5250.c +++ b/drivers/clk/samsung/clk-exynos5250.c @@ -155,7 +155,7 @@ static __initdata unsigned long exynos5250_clk_regs[] = { /* list of all parent clock list */ PNAME(mout_apll_p) = { "fin_pll", "fout_apll", }; -PNAME(mout_cpu_p) = { "mout_apll", "mout_mpll", }; +PNAME(mout_cpu_p) = { "mout_apll", "sclk_mpll", }; PNAME(mout_mpll_fout_p) = { "fout_mplldiv2", "fout_mpll" }; PNAME(mout_mpll_p) = { "fin_pll", "mout_mpll_fout" }; PNAME(mout_bpll_fout_p) = { "fout_bplldiv2", "fout_bpll" }; -- cgit v0.10.2 From 34376a50fb1fa095b9d0636fa41ed2e73125f214 Mon Sep 17 00:00:00 2001 From: Ben Greear Date: Thu, 6 Jun 2013 14:29:49 -0700 Subject: Fix lockup related to stop_machine being stuck in __do_softirq. The stop machine logic can lock up if all but one of the migration threads make it through the disable-irq step and the one remaining thread gets stuck in __do_softirq. The reason __do_softirq can hang is that it has a bail-out based on jiffies timeout, but in the lockup case, jiffies itself is not incremented. To work around this, re-add the max_restart counter in __do_irq and stop processing irqs after 10 restarts. Thanks to Tejun Heo and Rusty Russell and others for helping me track this down. This was introduced in 3.9 by commit c10d73671ad3 ("softirq: reduce latencies"). It may be worth looking into ath9k to see if it has issues with its irq handler at a later date. The hang stack traces look something like this: ------------[ cut here ]------------ WARNING: at kernel/watchdog.c:245 watchdog_overflow_callback+0x9c/0xa7() Watchdog detected hard LOCKUP on cpu 2 Modules linked in: ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 nfsv4 auth_rpcgss nfs fscache nf_nat_ipv4 nf_nat veth 8021q garp stp mrp llc pktgen lockd sunrpc] Pid: 23, comm: migration/2 Tainted: G C 3.9.4+ #11 Call Trace: warn_slowpath_common+0x85/0x9f warn_slowpath_fmt+0x46/0x48 watchdog_overflow_callback+0x9c/0xa7 __perf_event_overflow+0x137/0x1cb perf_event_overflow+0x14/0x16 intel_pmu_handle_irq+0x2dc/0x359 perf_event_nmi_handler+0x19/0x1b nmi_handle+0x7f/0xc2 do_nmi+0xbc/0x304 end_repeat_nmi+0x1e/0x2e <> cpu_stopper_thread+0xae/0x162 smpboot_thread_fn+0x258/0x260 kthread+0xc7/0xcf ret_from_fork+0x7c/0xb0 ---[ end trace 4947dfa9b0a4cec3 ]--- BUG: soft lockup - CPU#1 stuck for 22s! [migration/1:17] Modules linked in: ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 nfsv4 auth_rpcgss nfs fscache nf_nat_ipv4 nf_nat veth 8021q garp stp mrp llc pktgen lockd sunrpc] irq event stamp: 835637905 hardirqs last enabled at (835637904): __do_softirq+0x9f/0x257 hardirqs last disabled at (835637905): apic_timer_interrupt+0x6d/0x80 softirqs last enabled at (5654720): __do_softirq+0x1ff/0x257 softirqs last disabled at (5654725): irq_exit+0x5f/0xbb CPU 1 Pid: 17, comm: migration/1 Tainted: G WC 3.9.4+ #11 To be filled by O.E.M. To be filled by O.E.M./To be filled by O.E.M. RIP: tasklet_hi_action+0xf0/0xf0 Process migration/1 Call Trace: __do_softirq+0x117/0x257 irq_exit+0x5f/0xbb smp_apic_timer_interrupt+0x8a/0x98 apic_timer_interrupt+0x72/0x80 printk+0x4d/0x4f stop_machine_cpu_stop+0x22c/0x274 cpu_stopper_thread+0xae/0x162 smpboot_thread_fn+0x258/0x260 kthread+0xc7/0xcf ret_from_fork+0x7c/0xb0 Signed-off-by: Ben Greear Acked-by: Tejun Heo Acked-by: Pekka Riikonen Cc: Eric Dumazet Cc: stable@kernel.org Signed-off-by: Linus Torvalds diff --git a/kernel/softirq.c b/kernel/softirq.c index b5197dc..3d6833f 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -195,8 +195,12 @@ void local_bh_enable_ip(unsigned long ip) EXPORT_SYMBOL(local_bh_enable_ip); /* - * We restart softirq processing for at most 2 ms, - * and if need_resched() is not set. + * We restart softirq processing for at most MAX_SOFTIRQ_RESTART times, + * but break the loop if need_resched() is set or after 2 ms. + * The MAX_SOFTIRQ_TIME provides a nice upper bound in most cases, but in + * certain cases, such as stop_machine(), jiffies may cease to + * increment and so we need the MAX_SOFTIRQ_RESTART limit as + * well to make sure we eventually return from this method. * * These limits have been established via experimentation. * The two things to balance is latency against fairness - @@ -204,6 +208,7 @@ EXPORT_SYMBOL(local_bh_enable_ip); * should not be able to lock up the box. */ #define MAX_SOFTIRQ_TIME msecs_to_jiffies(2) +#define MAX_SOFTIRQ_RESTART 10 asmlinkage void __do_softirq(void) { @@ -212,6 +217,7 @@ asmlinkage void __do_softirq(void) unsigned long end = jiffies + MAX_SOFTIRQ_TIME; int cpu; unsigned long old_flags = current->flags; + int max_restart = MAX_SOFTIRQ_RESTART; /* * Mask out PF_MEMALLOC s current task context is borrowed for the @@ -265,7 +271,8 @@ restart: pending = local_softirq_pending(); if (pending) { - if (time_before(jiffies, end) && !need_resched()) + if (time_before(jiffies, end) && !need_resched() && + --max_restart) goto restart; wakeup_softirqd(); -- cgit v0.10.2 From ed13998c319b050fc9abdb73915859dfdbe1fb38 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Wed, 5 Jun 2013 15:30:55 +0200 Subject: sock_diag: fix filter code sent to userspace Filters need to be translated to real BPF code for userland, like SO_GETFILTER. Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller diff --git a/include/linux/filter.h b/include/linux/filter.h index c050dcc..f65f5a6 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -46,6 +46,7 @@ extern int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk); extern int sk_detach_filter(struct sock *sk); extern int sk_chk_filter(struct sock_filter *filter, unsigned int flen); extern int sk_get_filter(struct sock *sk, struct sock_filter __user *filter, unsigned len); +extern void sk_decode_filter(struct sock_filter *filt, struct sock_filter *to); #ifdef CONFIG_BPF_JIT #include diff --git a/net/core/filter.c b/net/core/filter.c index dad2a17..6438f29 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -778,7 +778,7 @@ int sk_detach_filter(struct sock *sk) } EXPORT_SYMBOL_GPL(sk_detach_filter); -static void sk_decode_filter(struct sock_filter *filt, struct sock_filter *to) +void sk_decode_filter(struct sock_filter *filt, struct sock_filter *to) { static const u16 decodes[] = { [BPF_S_ALU_ADD_K] = BPF_ALU|BPF_ADD|BPF_K, diff --git a/net/core/sock_diag.c b/net/core/sock_diag.c index d5bef0b0..a0e9cf6 100644 --- a/net/core/sock_diag.c +++ b/net/core/sock_diag.c @@ -73,8 +73,13 @@ int sock_diag_put_filterinfo(struct user_namespace *user_ns, struct sock *sk, goto out; } - if (filter) - memcpy(nla_data(attr), filter->insns, len); + if (filter) { + struct sock_filter *fb = (struct sock_filter *)nla_data(attr); + int i; + + for (i = 0; i < filter->len; i++, fb++) + sk_decode_filter(&filter->insns[i], fb); + } out: rcu_read_unlock(); -- cgit v0.10.2 From 7e5955db458b2d349a8180242afebc78a13ed023 Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Fri, 7 Jun 2013 11:17:07 +0800 Subject: ARM: prima2: fix incorrect panic usage In prima2, some functions of checking DT is registered in initcall level. If it doesn't match the compatible name of sirf, kernel will panic. It blocks the usage of multiplatform on other verndor. The error message is in below. Knic - not syncing: unable to find compatible pwrc node in dtb CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0-rc3-00006-gd7f26ea-dirty #86 [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x1) [] (show_stack+0x10/0x14) from [] (panic+0x90/0x1e8) [] (panic+0x90/0x1e8) from [] (sirfsoc_of_pwrc_init+0x24/0x) [] (sirfsoc_of_pwrc_init+0x24/0x58) from [] (do_one_initcal) [] (do_one_initcall+0x90/0x150) from [] (kernel_init_freeab) [] (kernel_init_freeable+0xfc/0x1c4) from [] (kernel_init+0) [] (kernel_init+0x8/0xe4) from [] (ret_from_fork+0x14/0x3c) Signen-off-by: Haojian Zhuang Signed-off-by: Olof Johansson diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c index 9936c18..8f595c0 100644 --- a/arch/arm/mach-prima2/pm.c +++ b/arch/arm/mach-prima2/pm.c @@ -101,8 +101,10 @@ static int __init sirfsoc_of_pwrc_init(void) struct device_node *np; np = of_find_matching_node(NULL, pwrc_ids); - if (!np) - panic("unable to find compatible pwrc node in dtb\n"); + if (!np) { + pr_err("unable to find compatible sirf pwrc node in dtb\n"); + return -ENOENT; + } /* * pwrc behind rtciobrg is not located in memory space diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c index 435019c..d5e0cbc 100644 --- a/arch/arm/mach-prima2/rstc.c +++ b/arch/arm/mach-prima2/rstc.c @@ -28,8 +28,10 @@ static int __init sirfsoc_of_rstc_init(void) struct device_node *np; np = of_find_matching_node(NULL, rstc_ids); - if (!np) - panic("unable to find compatible rstc node in dtb\n"); + if (!np) { + pr_err("unable to find compatible sirf rstc node in dtb\n"); + return -ENOENT; + } sirfsoc_rstc_base = of_iomap(np, 0); if (!sirfsoc_rstc_base) -- cgit v0.10.2 From 2a8fedd0c142d4328ab4667847e05afe17c3295c Mon Sep 17 00:00:00 2001 From: David Daney Date: Mon, 10 Jun 2013 12:33:47 -0700 Subject: kvm: Add definition of KVM_REG_MIPS We use 0x7000000000000000ULL as 0x6000000000000000ULL is reserved for ARM64. Signed-off-by: David Daney Signed-off-by: Gleb Natapov diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index a5c86fc..d88c8ee 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -783,6 +783,7 @@ struct kvm_dirty_tlb { #define KVM_REG_IA64 0x3000000000000000ULL #define KVM_REG_ARM 0x4000000000000000ULL #define KVM_REG_S390 0x5000000000000000ULL +#define KVM_REG_MIPS 0x7000000000000000ULL #define KVM_REG_SIZE_SHIFT 52 #define KVM_REG_SIZE_MASK 0x00f0000000000000ULL -- cgit v0.10.2 From 681865d48e867a4fb55ff0516e2aa1cee3e4f343 Mon Sep 17 00:00:00 2001 From: David Daney Date: Mon, 10 Jun 2013 12:33:48 -0700 Subject: mips/kvm: Use KVM_REG_MIPS and proper size indicators for *_ONE_REG The API requires that the GET_ONE_REG and SET_ONE_REG ioctls have this extra information encoded in the register identifiers. Signed-off-by: David Daney Signed-off-by: Gleb Natapov diff --git a/arch/mips/include/uapi/asm/kvm.h b/arch/mips/include/uapi/asm/kvm.h index 3f424f5..f09ff5a 100644 --- a/arch/mips/include/uapi/asm/kvm.h +++ b/arch/mips/include/uapi/asm/kvm.h @@ -58,56 +58,53 @@ struct kvm_fpu { * bits[2..0] - Register 'sel' index. * bits[7..3] - Register 'rd' index. * bits[15..8] - Must be zero. - * bits[63..16] - 1 -> CP0 registers. + * bits[31..16] - 1 -> CP0 registers. + * bits[51..32] - Must be zero. + * bits[63..52] - As per linux/kvm.h * * Other sets registers may be added in the future. Each set would - * have its own identifier in bits[63..16]. - * - * The addr field of struct kvm_one_reg must point to an aligned - * 64-bit wide location. For registers that are narrower than - * 64-bits, the value is stored in the low order bits of the location, - * and sign extended to 64-bits. + * have its own identifier in bits[31..16]. * * The registers defined in struct kvm_regs are also accessible, the * id values for these are below. */ -#define KVM_REG_MIPS_R0 0 -#define KVM_REG_MIPS_R1 1 -#define KVM_REG_MIPS_R2 2 -#define KVM_REG_MIPS_R3 3 -#define KVM_REG_MIPS_R4 4 -#define KVM_REG_MIPS_R5 5 -#define KVM_REG_MIPS_R6 6 -#define KVM_REG_MIPS_R7 7 -#define KVM_REG_MIPS_R8 8 -#define KVM_REG_MIPS_R9 9 -#define KVM_REG_MIPS_R10 10 -#define KVM_REG_MIPS_R11 11 -#define KVM_REG_MIPS_R12 12 -#define KVM_REG_MIPS_R13 13 -#define KVM_REG_MIPS_R14 14 -#define KVM_REG_MIPS_R15 15 -#define KVM_REG_MIPS_R16 16 -#define KVM_REG_MIPS_R17 17 -#define KVM_REG_MIPS_R18 18 -#define KVM_REG_MIPS_R19 19 -#define KVM_REG_MIPS_R20 20 -#define KVM_REG_MIPS_R21 21 -#define KVM_REG_MIPS_R22 22 -#define KVM_REG_MIPS_R23 23 -#define KVM_REG_MIPS_R24 24 -#define KVM_REG_MIPS_R25 25 -#define KVM_REG_MIPS_R26 26 -#define KVM_REG_MIPS_R27 27 -#define KVM_REG_MIPS_R28 28 -#define KVM_REG_MIPS_R29 29 -#define KVM_REG_MIPS_R30 30 -#define KVM_REG_MIPS_R31 31 +#define KVM_REG_MIPS_R0 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 0) +#define KVM_REG_MIPS_R1 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 1) +#define KVM_REG_MIPS_R2 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 2) +#define KVM_REG_MIPS_R3 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 3) +#define KVM_REG_MIPS_R4 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 4) +#define KVM_REG_MIPS_R5 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 5) +#define KVM_REG_MIPS_R6 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 6) +#define KVM_REG_MIPS_R7 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 7) +#define KVM_REG_MIPS_R8 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 8) +#define KVM_REG_MIPS_R9 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 9) +#define KVM_REG_MIPS_R10 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 10) +#define KVM_REG_MIPS_R11 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 11) +#define KVM_REG_MIPS_R12 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 12) +#define KVM_REG_MIPS_R13 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 13) +#define KVM_REG_MIPS_R14 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 14) +#define KVM_REG_MIPS_R15 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 15) +#define KVM_REG_MIPS_R16 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 16) +#define KVM_REG_MIPS_R17 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 17) +#define KVM_REG_MIPS_R18 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 18) +#define KVM_REG_MIPS_R19 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 19) +#define KVM_REG_MIPS_R20 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 20) +#define KVM_REG_MIPS_R21 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 21) +#define KVM_REG_MIPS_R22 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 22) +#define KVM_REG_MIPS_R23 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 23) +#define KVM_REG_MIPS_R24 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 24) +#define KVM_REG_MIPS_R25 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 25) +#define KVM_REG_MIPS_R26 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 26) +#define KVM_REG_MIPS_R27 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 27) +#define KVM_REG_MIPS_R28 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 28) +#define KVM_REG_MIPS_R29 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 29) +#define KVM_REG_MIPS_R30 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 30) +#define KVM_REG_MIPS_R31 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 31) -#define KVM_REG_MIPS_HI 32 -#define KVM_REG_MIPS_LO 33 -#define KVM_REG_MIPS_PC 34 +#define KVM_REG_MIPS_HI (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 32) +#define KVM_REG_MIPS_LO (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 33) +#define KVM_REG_MIPS_PC (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 34) /* * KVM MIPS specific structures and definitions diff --git a/arch/mips/kvm/kvm_mips.c b/arch/mips/kvm/kvm_mips.c index d934b01..dd203e5 100644 --- a/arch/mips/kvm/kvm_mips.c +++ b/arch/mips/kvm/kvm_mips.c @@ -485,29 +485,35 @@ kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu, return -ENOIOCTLCMD; } -#define KVM_REG_MIPS_CP0_INDEX (0x10000 + 8 * 0 + 0) -#define KVM_REG_MIPS_CP0_ENTRYLO0 (0x10000 + 8 * 2 + 0) -#define KVM_REG_MIPS_CP0_ENTRYLO1 (0x10000 + 8 * 3 + 0) -#define KVM_REG_MIPS_CP0_CONTEXT (0x10000 + 8 * 4 + 0) -#define KVM_REG_MIPS_CP0_USERLOCAL (0x10000 + 8 * 4 + 2) -#define KVM_REG_MIPS_CP0_PAGEMASK (0x10000 + 8 * 5 + 0) -#define KVM_REG_MIPS_CP0_PAGEGRAIN (0x10000 + 8 * 5 + 1) -#define KVM_REG_MIPS_CP0_WIRED (0x10000 + 8 * 6 + 0) -#define KVM_REG_MIPS_CP0_HWRENA (0x10000 + 8 * 7 + 0) -#define KVM_REG_MIPS_CP0_BADVADDR (0x10000 + 8 * 8 + 0) -#define KVM_REG_MIPS_CP0_COUNT (0x10000 + 8 * 9 + 0) -#define KVM_REG_MIPS_CP0_ENTRYHI (0x10000 + 8 * 10 + 0) -#define KVM_REG_MIPS_CP0_COMPARE (0x10000 + 8 * 11 + 0) -#define KVM_REG_MIPS_CP0_STATUS (0x10000 + 8 * 12 + 0) -#define KVM_REG_MIPS_CP0_CAUSE (0x10000 + 8 * 13 + 0) -#define KVM_REG_MIPS_CP0_EBASE (0x10000 + 8 * 15 + 1) -#define KVM_REG_MIPS_CP0_CONFIG (0x10000 + 8 * 16 + 0) -#define KVM_REG_MIPS_CP0_CONFIG1 (0x10000 + 8 * 16 + 1) -#define KVM_REG_MIPS_CP0_CONFIG2 (0x10000 + 8 * 16 + 2) -#define KVM_REG_MIPS_CP0_CONFIG3 (0x10000 + 8 * 16 + 3) -#define KVM_REG_MIPS_CP0_CONFIG7 (0x10000 + 8 * 16 + 7) -#define KVM_REG_MIPS_CP0_XCONTEXT (0x10000 + 8 * 20 + 0) -#define KVM_REG_MIPS_CP0_ERROREPC (0x10000 + 8 * 30 + 0) +#define MIPS_CP0_32(_R, _S) \ + (KVM_REG_MIPS | KVM_REG_SIZE_U32 | 0x10000 | (8 * (_R) + (_S))) + +#define MIPS_CP0_64(_R, _S) \ + (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 0x10000 | (8 * (_R) + (_S))) + +#define KVM_REG_MIPS_CP0_INDEX MIPS_CP0_32(0, 0) +#define KVM_REG_MIPS_CP0_ENTRYLO0 MIPS_CP0_64(2, 0) +#define KVM_REG_MIPS_CP0_ENTRYLO1 MIPS_CP0_64(3, 0) +#define KVM_REG_MIPS_CP0_CONTEXT MIPS_CP0_64(4, 0) +#define KVM_REG_MIPS_CP0_USERLOCAL MIPS_CP0_64(4, 2) +#define KVM_REG_MIPS_CP0_PAGEMASK MIPS_CP0_32(5, 0) +#define KVM_REG_MIPS_CP0_PAGEGRAIN MIPS_CP0_32(5, 1) +#define KVM_REG_MIPS_CP0_WIRED MIPS_CP0_32(6, 0) +#define KVM_REG_MIPS_CP0_HWRENA MIPS_CP0_32(7, 0) +#define KVM_REG_MIPS_CP0_BADVADDR MIPS_CP0_64(8, 0) +#define KVM_REG_MIPS_CP0_COUNT MIPS_CP0_32(9, 0) +#define KVM_REG_MIPS_CP0_ENTRYHI MIPS_CP0_64(10, 0) +#define KVM_REG_MIPS_CP0_COMPARE MIPS_CP0_32(11, 0) +#define KVM_REG_MIPS_CP0_STATUS MIPS_CP0_32(12, 0) +#define KVM_REG_MIPS_CP0_CAUSE MIPS_CP0_32(13, 0) +#define KVM_REG_MIPS_CP0_EBASE MIPS_CP0_64(15, 1) +#define KVM_REG_MIPS_CP0_CONFIG MIPS_CP0_32(16, 0) +#define KVM_REG_MIPS_CP0_CONFIG1 MIPS_CP0_32(16, 1) +#define KVM_REG_MIPS_CP0_CONFIG2 MIPS_CP0_32(16, 2) +#define KVM_REG_MIPS_CP0_CONFIG3 MIPS_CP0_32(16, 3) +#define KVM_REG_MIPS_CP0_CONFIG7 MIPS_CP0_32(16, 7) +#define KVM_REG_MIPS_CP0_XCONTEXT MIPS_CP0_64(20, 0) +#define KVM_REG_MIPS_CP0_ERROREPC MIPS_CP0_64(30, 0) static u64 kvm_mips_get_one_regs[] = { KVM_REG_MIPS_R0, @@ -567,8 +573,6 @@ static u64 kvm_mips_get_one_regs[] = { static int kvm_mips_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) { - u64 __user *uaddr = (u64 __user *)(long)reg->addr; - struct mips_coproc *cop0 = vcpu->arch.cop0; s64 v; @@ -631,18 +635,39 @@ static int kvm_mips_get_reg(struct kvm_vcpu *vcpu, default: return -EINVAL; } - return put_user(v, uaddr); + if ((reg->id & KVM_REG_SIZE_MASK) == KVM_REG_SIZE_U64) { + u64 __user *uaddr64 = (u64 __user *)(long)reg->addr; + return put_user(v, uaddr64); + } else if ((reg->id & KVM_REG_SIZE_MASK) == KVM_REG_SIZE_U32) { + u32 __user *uaddr32 = (u32 __user *)(long)reg->addr; + u32 v32 = (u32)v; + return put_user(v32, uaddr32); + } else { + return -EINVAL; + } } static int kvm_mips_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) { - u64 __user *uaddr = (u64 __user *)(long)reg->addr; struct mips_coproc *cop0 = vcpu->arch.cop0; u64 v; - if (get_user(v, uaddr) != 0) - return -EFAULT; + if ((reg->id & KVM_REG_SIZE_MASK) == KVM_REG_SIZE_U64) { + u64 __user *uaddr64 = (u64 __user *)(long)reg->addr; + + if (get_user(v, uaddr64) != 0) + return -EFAULT; + } else if ((reg->id & KVM_REG_SIZE_MASK) == KVM_REG_SIZE_U32) { + u32 __user *uaddr32 = (u32 __user *)(long)reg->addr; + s32 v32; + + if (get_user(v32, uaddr32) != 0) + return -EFAULT; + v = (s64)v32; + } else { + return -EINVAL; + } switch (reg->id) { case KVM_REG_MIPS_R0: -- cgit v0.10.2 From cd3fc1b9a34e535a8acbead7461475fbc43bdd49 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Fri, 17 May 2013 18:24:29 +0200 Subject: ARM: SAMSUNG: pm: Adjust for pinctrl- and DT-enabled platforms This patch makes legacy code on suspend/resume path being executed conditionally, on non-DT platforms only, to fix suspend/resume of DT-enabled systems, for which the code is inappropriate. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park [olof: add #include ] Signed-off-by: Olof Johansson diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 53210ec..bd7124c 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -261,7 +262,8 @@ static int s3c_pm_enter(suspend_state_t state) * require a full power-cycle) */ - if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) && + if (!of_have_populated_dt() && + !any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) && !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) { printk(KERN_ERR "%s: No wake-up sources!\n", __func__); printk(KERN_ERR "%s: Aborting sleep\n", __func__); @@ -270,8 +272,11 @@ static int s3c_pm_enter(suspend_state_t state) /* save all necessary core registers not covered by the drivers */ - samsung_pm_save_gpios(); - samsung_pm_saved_gpios(); + if (!of_have_populated_dt()) { + samsung_pm_save_gpios(); + samsung_pm_saved_gpios(); + } + s3c_pm_save_uarts(); s3c_pm_save_core(); @@ -310,8 +315,11 @@ static int s3c_pm_enter(suspend_state_t state) s3c_pm_restore_core(); s3c_pm_restore_uarts(); - samsung_pm_restore_gpios(); - s3c_pm_restored_gpios(); + + if (!of_have_populated_dt()) { + samsung_pm_restore_gpios(); + s3c_pm_restored_gpios(); + } s3c_pm_debug_init(); -- cgit v0.10.2 From 4edd1ae91baa63e120b414647c79a7aa5ca50ae7 Mon Sep 17 00:00:00 2001 From: Mihai Caraman Date: Thu, 6 Jun 2013 19:16:29 -0500 Subject: kvm/ppc/booke64: Fix AltiVec interrupt numbers and build breakage Interrupt numbers defined for Book3E follows IVORs definition. Align BOOKE_INTERRUPT_ALTIVEC_UNAVAIL and BOOKE_INTERRUPT_ALTIVEC_ASSIST to this rule which also fixes the build breakage. IVORs 32 and 33 are shared so reflect this in the interrupts naming. This fixes a build break for 64-bit booke KVM. Signed-off-by: Mihai Caraman Signed-off-by: Scott Wood Signed-off-by: Gleb Natapov diff --git a/arch/powerpc/include/asm/kvm_asm.h b/arch/powerpc/include/asm/kvm_asm.h index b9dd382..851bac7 100644 --- a/arch/powerpc/include/asm/kvm_asm.h +++ b/arch/powerpc/include/asm/kvm_asm.h @@ -54,8 +54,16 @@ #define BOOKE_INTERRUPT_DEBUG 15 /* E500 */ -#define BOOKE_INTERRUPT_SPE_UNAVAIL 32 -#define BOOKE_INTERRUPT_SPE_FP_DATA 33 +#define BOOKE_INTERRUPT_SPE_ALTIVEC_UNAVAIL 32 +#define BOOKE_INTERRUPT_SPE_FP_DATA_ALTIVEC_ASSIST 33 +/* + * TODO: Unify 32-bit and 64-bit kernel exception handlers to use same defines + */ +#define BOOKE_INTERRUPT_SPE_UNAVAIL BOOKE_INTERRUPT_SPE_ALTIVEC_UNAVAIL +#define BOOKE_INTERRUPT_SPE_FP_DATA BOOKE_INTERRUPT_SPE_FP_DATA_ALTIVEC_ASSIST +#define BOOKE_INTERRUPT_ALTIVEC_UNAVAIL BOOKE_INTERRUPT_SPE_ALTIVEC_UNAVAIL +#define BOOKE_INTERRUPT_ALTIVEC_ASSIST \ + BOOKE_INTERRUPT_SPE_FP_DATA_ALTIVEC_ASSIST #define BOOKE_INTERRUPT_SPE_FP_ROUND 34 #define BOOKE_INTERRUPT_PERFORMANCE_MONITOR 35 #define BOOKE_INTERRUPT_DOORBELL 36 @@ -67,10 +75,6 @@ #define BOOKE_INTERRUPT_HV_SYSCALL 40 #define BOOKE_INTERRUPT_HV_PRIV 41 -/* altivec */ -#define BOOKE_INTERRUPT_ALTIVEC_UNAVAIL 42 -#define BOOKE_INTERRUPT_ALTIVEC_ASSIST 43 - /* book3s */ #define BOOK3S_INTERRUPT_SYSTEM_RESET 0x100 -- cgit v0.10.2 From 2b6398fcf2831f52a8ad9f01c123b3ce2ea31277 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Thu, 6 Jun 2013 19:16:30 -0500 Subject: kvm/ppc/booke64: Disable e6500 support The previous patch made 64-bit booke KVM build again, but Altivec support is still not complete, and we can't prevent the guest from turning on Altivec (which can corrupt host state until state save/restore is implemented). Disable e6500 on KVM until this is fixed. Signed-off-by: Scott Wood Signed-off-by: Gleb Natapov diff --git a/arch/powerpc/kvm/e500mc.c b/arch/powerpc/kvm/e500mc.c index 753cc99..19c8379 100644 --- a/arch/powerpc/kvm/e500mc.c +++ b/arch/powerpc/kvm/e500mc.c @@ -177,8 +177,6 @@ int kvmppc_core_check_processor_compat(void) r = 0; else if (strcmp(cur_cpu_spec->cpu_name, "e5500") == 0) r = 0; - else if (strcmp(cur_cpu_spec->cpu_name, "e6500") == 0) - r = 0; else r = -ENOTSUPP; -- cgit v0.10.2 From f1e89028f020ca982bf51be6eaba0d462ba0f7fa Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Thu, 6 Jun 2013 19:16:31 -0500 Subject: kvm/ppc/booke: Hold srcu lock when calling gfn functions KVM core expects arch code to acquire the srcu lock when calling gfn_to_memslot and similar functions. Signed-off-by: Scott Wood Signed-off-by: Gleb Natapov diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c index 5dd3ab4..ed03854 100644 --- a/arch/powerpc/kvm/44x_tlb.c +++ b/arch/powerpc/kvm/44x_tlb.c @@ -441,6 +441,7 @@ int kvmppc_44x_emul_tlbwe(struct kvm_vcpu *vcpu, u8 ra, u8 rs, u8 ws) struct kvmppc_vcpu_44x *vcpu_44x = to_44x(vcpu); struct kvmppc_44x_tlbe *tlbe; unsigned int gtlb_index; + int idx; gtlb_index = kvmppc_get_gpr(vcpu, ra); if (gtlb_index >= KVM44x_GUEST_TLB_SIZE) { @@ -473,6 +474,8 @@ int kvmppc_44x_emul_tlbwe(struct kvm_vcpu *vcpu, u8 ra, u8 rs, u8 ws) return EMULATE_FAIL; } + idx = srcu_read_lock(&vcpu->kvm->srcu); + if (tlbe_is_host_safe(vcpu, tlbe)) { gva_t eaddr; gpa_t gpaddr; @@ -489,6 +492,8 @@ int kvmppc_44x_emul_tlbwe(struct kvm_vcpu *vcpu, u8 ra, u8 rs, u8 ws) kvmppc_mmu_map(vcpu, eaddr, gpaddr, gtlb_index); } + srcu_read_unlock(&vcpu->kvm->srcu, idx); + trace_kvm_gtlb_write(gtlb_index, tlbe->tid, tlbe->word0, tlbe->word1, tlbe->word2); diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c index 1020119..ecbe908 100644 --- a/arch/powerpc/kvm/booke.c +++ b/arch/powerpc/kvm/booke.c @@ -832,6 +832,7 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu, { int r = RESUME_HOST; int s; + int idx; /* update before a new last_exit_type is rewritten */ kvmppc_update_timing_stats(vcpu); @@ -1053,6 +1054,8 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu, break; } + idx = srcu_read_lock(&vcpu->kvm->srcu); + gpaddr = kvmppc_mmu_xlate(vcpu, gtlb_index, eaddr); gfn = gpaddr >> PAGE_SHIFT; @@ -1075,6 +1078,7 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu, kvmppc_account_exit(vcpu, MMIO_EXITS); } + srcu_read_unlock(&vcpu->kvm->srcu, idx); break; } @@ -1098,6 +1102,8 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu, kvmppc_account_exit(vcpu, ITLB_VIRT_MISS_EXITS); + idx = srcu_read_lock(&vcpu->kvm->srcu); + gpaddr = kvmppc_mmu_xlate(vcpu, gtlb_index, eaddr); gfn = gpaddr >> PAGE_SHIFT; @@ -1114,6 +1120,7 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu, kvmppc_booke_queue_irqprio(vcpu, BOOKE_IRQPRIO_MACHINE_CHECK); } + srcu_read_unlock(&vcpu->kvm->srcu, idx); break; } diff --git a/arch/powerpc/kvm/e500_mmu.c b/arch/powerpc/kvm/e500_mmu.c index c41a5a9..6d6f153 100644 --- a/arch/powerpc/kvm/e500_mmu.c +++ b/arch/powerpc/kvm/e500_mmu.c @@ -396,6 +396,7 @@ int kvmppc_e500_emul_tlbwe(struct kvm_vcpu *vcpu) struct kvm_book3e_206_tlb_entry *gtlbe; int tlbsel, esel; int recal = 0; + int idx; tlbsel = get_tlb_tlbsel(vcpu); esel = get_tlb_esel(vcpu, tlbsel); @@ -430,6 +431,8 @@ int kvmppc_e500_emul_tlbwe(struct kvm_vcpu *vcpu) kvmppc_set_tlb1map_range(vcpu, gtlbe); } + idx = srcu_read_lock(&vcpu->kvm->srcu); + /* Invalidate shadow mappings for the about-to-be-clobbered TLBE. */ if (tlbe_is_host_safe(vcpu, gtlbe)) { u64 eaddr = get_tlb_eaddr(gtlbe); @@ -444,6 +447,8 @@ int kvmppc_e500_emul_tlbwe(struct kvm_vcpu *vcpu) kvmppc_mmu_map(vcpu, eaddr, raddr, index_of(tlbsel, esel)); } + srcu_read_unlock(&vcpu->kvm->srcu, idx); + kvmppc_set_exit_type(vcpu, EMULATED_TLBWE_EXITS); return EMULATE_DONE; } -- cgit v0.10.2 From 7c11c0ccc7ba186433b2102cf3775ce6b2445453 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Thu, 6 Jun 2013 19:16:32 -0500 Subject: kvm/ppc/booke64: Fix lazy ee handling in kvmppc_handle_exit() EE is hard-disabled on entry to kvmppc_handle_exit(), so call hard_irq_disable() so that PACA_IRQ_HARD_DIS is set, and soft_enabled is unset. Without this, we get warnings such as arch/powerpc/kernel/time.c:300, and sometimes host kernel hangs. Signed-off-by: Scott Wood Signed-off-by: Gleb Natapov diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c index ecbe908..5cd7ad0 100644 --- a/arch/powerpc/kvm/booke.c +++ b/arch/powerpc/kvm/booke.c @@ -834,6 +834,17 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu, int s; int idx; +#ifdef CONFIG_PPC64 + WARN_ON(local_paca->irq_happened != 0); +#endif + + /* + * We enter with interrupts disabled in hardware, but + * we need to call hard_irq_disable anyway to ensure that + * the software state is kept in sync. + */ + hard_irq_disable(); + /* update before a new last_exit_type is rewritten */ kvmppc_update_timing_stats(vcpu); -- cgit v0.10.2 From 2786aae7fc935e44f81d5f359b6a768c81b46a9b Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Wed, 5 Jun 2013 18:54:00 +0200 Subject: net/ti davinci_mdio: don't hold a spin lock while calling pm_runtime was playing with suspend and run into this: |BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:891 |in_atomic(): 1, irqs_disabled(): 0, pid: 1963, name: bash |6 locks held by bash/1963: |CPU: 0 PID: 1963 Comm: bash Not tainted 3.10.0-rc4+ #50 |[] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) |[] (show_stack+0x10/0x14) from [] (__pm_runtime_idle+0xa4/0xac) |[] (__pm_runtime_idle+0xa4/0xac) from [] (davinci_mdio_suspend+0x6c/0x9c) |[] (davinci_mdio_suspend+0x6c/0x9c) from [] (platform_pm_suspend+0x2c/0x54) |[] (platform_pm_suspend+0x2c/0x54) from [] (dpm_run_callback.isra.3+0x2c/0x64) |[] (dpm_run_callback.isra.3+0x2c/0x64) from [] (__device_suspend+0x100/0x22c) |[] (__device_suspend+0x100/0x22c) from [] (dpm_suspend+0x68/0x230) |[] (dpm_suspend+0x68/0x230) from [] (suspend_devices_and_enter+0x68/0x350) |[] (suspend_devices_and_enter+0x68/0x350) from [] (pm_suspend+0x210/0x24c) |[] (pm_suspend+0x210/0x24c) from [] (state_store+0x6c/0xbc) |[] (state_store+0x6c/0xbc) from [] (kobj_attr_store+0x14/0x20) |[] (kobj_attr_store+0x14/0x20) from [] (sysfs_write_file+0x16c/0x19c) |[] (sysfs_write_file+0x16c/0x19c) from [] (vfs_write+0xb4/0x190) |[] (vfs_write+0xb4/0x190) from [] (SyS_write+0x3c/0x70) |[] (SyS_write+0x3c/0x70) from [] (ret_fast_syscall+0x0/0x48) I don't see a reason why the pm_runtime call must be under the lock. Further I don't understand why this is a spinlock and not mutex. Cc: Mugunthan V N Signed-off-by: Sebastian Andrzej Siewior Acked-by: Mugunthan V N Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c index 12aec17..b2275d1 100644 --- a/drivers/net/ethernet/ti/davinci_mdio.c +++ b/drivers/net/ethernet/ti/davinci_mdio.c @@ -449,10 +449,9 @@ static int davinci_mdio_suspend(struct device *dev) __raw_writel(ctrl, &data->regs->control); wait_for_idle(data); - pm_runtime_put_sync(data->dev); - data->suspended = true; spin_unlock(&data->lock); + pm_runtime_put_sync(data->dev); return 0; } @@ -462,9 +461,9 @@ static int davinci_mdio_resume(struct device *dev) struct davinci_mdio_data *data = dev_get_drvdata(dev); u32 ctrl; - spin_lock(&data->lock); pm_runtime_get_sync(data->dev); + spin_lock(&data->lock); /* restart the scan state machine */ ctrl = __raw_readl(&data->regs->control); ctrl |= CONTROL_ENABLE; -- cgit v0.10.2 From 9f8c4265bda4a6e9aa97041d5cfd91386f460b65 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 5 Jun 2013 23:54:01 +0400 Subject: sh_eth: fix result of sh_eth_check_reset() on timeout When the first loop in sh_eth_check_reset() runs to its end, 'cnt' is 0, so the following check for 'cnt < 0' fails to catch the timeout. Fix the condition in this check, so that the timeout is actually reported. While at it, fix the grammar in the failure message... Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 42e9dd0..b4479b5 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -897,8 +897,8 @@ static int sh_eth_check_reset(struct net_device *ndev) mdelay(1); cnt--; } - if (cnt < 0) { - pr_err("Device reset fail\n"); + if (cnt <= 0) { + pr_err("Device reset failed\n"); ret = -ETIMEDOUT; } return ret; -- cgit v0.10.2 From c2020be3c35ab230b4ee046c262ddab3e0d3aab4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Thu, 6 Jun 2013 12:57:02 +0200 Subject: qmi_wwan/cdc_ether: let qmi_wwan handle the Huawei E1820 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Another QMI speaking Qualcomm based device, which should be driven by qmi_wwan, while cdc_ether should ignore it. Like on other Huawei devices, the wwan function can appear either as a single vendor specific interface or as a CDC ECM class function using separate control and data interfaces. The ECM control interface protocol is 0xff, likely in an attempt to indicate that vendor specific management is required. In addition to the near standard CDC class, Huawei also add vendor specific AT management commands to their firmwares. This is probably an attempt to support non-Windows systems using standard class drivers. Unfortunately, this part of the firmware is often buggy. Linux is much better off using whatever native vendor specific management protocol the device offers, and Windows uses, whenever possible. This means QMI in the case of Qualcomm based devices. The E1820 has been verified to work fine with QMI. Matching on interface number is necessary to distiguish the wwan function from serial functions in the single interface mode, as both function types will have class/subclass/function set to ff/ff/ff. The control interface number does not change in CDC ECM mode, so the interface number matching rule is sufficient to handle both modes. The cdc_ether blacklist entry is only relevant in CDC ECM mode, but using a similar interface number based rule helps document this as a transfer from one driver to another. Other Huawei 02/06/ff devices are left with the cdc_ether driver because we do not know whether they are based on Qualcomm chips. The Huawei specific AT command management is known to be somewhat hardware independent, and their usage of these class codes may also be independent of the modem hardware. Reported-by: Graham Inggs Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index 078795f..04ee044 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -627,6 +627,12 @@ static const struct usb_device_id products [] = { .driver_info = 0, }, +/* Huawei E1820 - handled by qmi_wwan */ +{ + USB_DEVICE_INTERFACE_NUMBER(HUAWEI_VENDOR_ID, 0x14ac, 1), + .driver_info = 0, +}, + /* Realtek RTL8152 Based USB 2.0 Ethernet Adapters */ #if defined(CONFIG_USB_RTL8152) || defined(CONFIG_USB_RTL8152_MODULE) { diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 86adfa0..d095d0d 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -519,6 +519,7 @@ static const struct usb_device_id products[] = { /* 3. Combined interface devices matching on interface number */ {QMI_FIXED_INTF(0x0408, 0xea42, 4)}, /* Yota / Megafon M100-1 */ {QMI_FIXED_INTF(0x12d1, 0x140c, 1)}, /* Huawei E173 */ + {QMI_FIXED_INTF(0x12d1, 0x14ac, 1)}, /* Huawei E1820 */ {QMI_FIXED_INTF(0x19d2, 0x0002, 1)}, {QMI_FIXED_INTF(0x19d2, 0x0012, 1)}, {QMI_FIXED_INTF(0x19d2, 0x0017, 3)}, -- cgit v0.10.2 From 05c05351943cc03bf5c77e86953b24ae6fb21368 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Thu, 6 Jun 2013 15:20:39 +0300 Subject: vhost: check owner before we overwrite ubuf_info If device has an owner, we shouldn't touch ubuf_info since it might be in use. Signed-off-by: Michael S. Tsirkin Signed-off-by: David S. Miller diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c index b07d96b..8cf5aec 100644 --- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -1054,6 +1054,10 @@ static long vhost_net_set_owner(struct vhost_net *n) int r; mutex_lock(&n->dev.mutex); + if (vhost_dev_has_owner(&n->dev)) { + r = -EBUSY; + goto out; + } r = vhost_net_set_ubuf_info(n); if (r) goto out; diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c index beee7f5..60aa5ad 100644 --- a/drivers/vhost/vhost.c +++ b/drivers/vhost/vhost.c @@ -344,13 +344,19 @@ static int vhost_attach_cgroups(struct vhost_dev *dev) } /* Caller should have device mutex */ +bool vhost_dev_has_owner(struct vhost_dev *dev) +{ + return dev->mm; +} + +/* Caller should have device mutex */ long vhost_dev_set_owner(struct vhost_dev *dev) { struct task_struct *worker; int err; /* Is there an owner already? */ - if (dev->mm) { + if (vhost_dev_has_owner(dev)) { err = -EBUSY; goto err_mm; } diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h index a7ad635..64adcf9 100644 --- a/drivers/vhost/vhost.h +++ b/drivers/vhost/vhost.h @@ -133,6 +133,7 @@ struct vhost_dev { long vhost_dev_init(struct vhost_dev *, struct vhost_virtqueue **vqs, int nvqs); long vhost_dev_set_owner(struct vhost_dev *dev); +bool vhost_dev_has_owner(struct vhost_dev *dev); long vhost_dev_check_owner(struct vhost_dev *); struct vhost_memory *vhost_dev_reset_owner_prepare(void); void vhost_dev_reset_owner(struct vhost_dev *, struct vhost_memory *); -- cgit v0.10.2 From 288cfe78c8173f35c7a94f06859f60b3693d828a Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Thu, 6 Jun 2013 15:20:46 +0300 Subject: vhost: fix ubuf_info cleanup vhost_net_clear_ubuf_info didn't clear ubuf_info after kfree, this could trigger double free. Fix this and simplify this code to make it more robust: make sure ubuf info is always freed through vhost_net_clear_ubuf_info. Reported-by: Tommi Rantala Signed-off-by: Michael S. Tsirkin Signed-off-by: David S. Miller diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c index 8cf5aec..f80d3dd 100644 --- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -155,14 +155,11 @@ static void vhost_net_ubuf_put_and_wait(struct vhost_net_ubuf_ref *ubufs) static void vhost_net_clear_ubuf_info(struct vhost_net *n) { - - bool zcopy; int i; - for (i = 0; i < n->dev.nvqs; ++i) { - zcopy = vhost_net_zcopy_mask & (0x1 << i); - if (zcopy) - kfree(n->vqs[i].ubuf_info); + for (i = 0; i < VHOST_NET_VQ_MAX; ++i) { + kfree(n->vqs[i].ubuf_info); + n->vqs[i].ubuf_info = NULL; } } @@ -171,7 +168,7 @@ int vhost_net_set_ubuf_info(struct vhost_net *n) bool zcopy; int i; - for (i = 0; i < n->dev.nvqs; ++i) { + for (i = 0; i < VHOST_NET_VQ_MAX; ++i) { zcopy = vhost_net_zcopy_mask & (0x1 << i); if (!zcopy) continue; @@ -183,12 +180,7 @@ int vhost_net_set_ubuf_info(struct vhost_net *n) return 0; err: - while (i--) { - zcopy = vhost_net_zcopy_mask & (0x1 << i); - if (!zcopy) - continue; - kfree(n->vqs[i].ubuf_info); - } + vhost_net_clear_ubuf_info(n); return -ENOMEM; } @@ -196,12 +188,12 @@ void vhost_net_vq_reset(struct vhost_net *n) { int i; + vhost_net_clear_ubuf_info(n); + for (i = 0; i < VHOST_NET_VQ_MAX; i++) { n->vqs[i].done_idx = 0; n->vqs[i].upend_idx = 0; n->vqs[i].ubufs = NULL; - kfree(n->vqs[i].ubuf_info); - n->vqs[i].ubuf_info = NULL; n->vqs[i].vhost_hlen = 0; n->vqs[i].sock_hlen = 0; } -- cgit v0.10.2 From 1abd165ed757db1afdefaac0a4bc8a70f97d258c Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Thu, 6 Jun 2013 15:53:47 +0200 Subject: net: sctp: fix NULL pointer dereference in socket destruction While stress testing sctp sockets, I hit the following panic: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: [] sctp_endpoint_free+0xe/0x40 [sctp] PGD 7cead067 PUD 7ce76067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: sctp(F) libcrc32c(F) [...] CPU: 7 PID: 2950 Comm: acc Tainted: GF 3.10.0-rc2+ #1 Hardware name: Dell Inc. PowerEdge T410/0H19HD, BIOS 1.6.3 02/01/2011 task: ffff88007ce0e0c0 ti: ffff88007b568000 task.ti: ffff88007b568000 RIP: 0010:[] [] sctp_endpoint_free+0xe/0x40 [sctp] RSP: 0018:ffff88007b569e08 EFLAGS: 00010292 RAX: 0000000000000000 RBX: ffff88007db78a00 RCX: dead000000200200 RDX: ffffffffa049fdb0 RSI: ffff8800379baf38 RDI: 0000000000000000 RBP: ffff88007b569e18 R08: ffff88007c230da0 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff880077990d00 R14: 0000000000000084 R15: ffff88007db78a00 FS: 00007fc18ab61700(0000) GS:ffff88007fc60000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000020 CR3: 000000007cf9d000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff88007b569e38 ffff88007db78a00 ffff88007b569e38 ffffffffa049fded ffffffff81abf0c0 ffff88007db78a00 ffff88007b569e58 ffffffff8145b60e 0000000000000000 0000000000000000 ffff88007b569eb8 ffffffff814df36e Call Trace: [] sctp_destroy_sock+0x3d/0x80 [sctp] [] sk_common_release+0x1e/0xf0 [] inet_create+0x2ae/0x350 [] __sock_create+0x11f/0x240 [] sock_create+0x30/0x40 [] SyS_socket+0x4c/0xc0 [] ? do_page_fault+0xe/0x10 [] ? page_fault+0x22/0x30 [] system_call_fastpath+0x16/0x1b Code: 0c c9 c3 66 2e 0f 1f 84 00 00 00 00 00 e8 fb fe ff ff c9 c3 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 53 48 83 ec 08 66 66 66 66 90 <48> 8b 47 20 48 89 fb c6 47 1c 01 c6 40 12 07 e8 9e 68 01 00 48 RIP [] sctp_endpoint_free+0xe/0x40 [sctp] RSP CR2: 0000000000000020 ---[ end trace e0d71ec1108c1dd9 ]--- I did not hit this with the lksctp-tools functional tests, but with a small, multi-threaded test program, that heavily allocates, binds, listens and waits in accept on sctp sockets, and then randomly kills some of them (no need for an actual client in this case to hit this). Then, again, allocating, binding, etc, and then killing child processes. This panic then only occurs when ``echo 1 > /proc/sys/net/sctp/auth_enable'' is set. The cause for that is actually very simple: in sctp_endpoint_init() we enter the path of sctp_auth_init_hmacs(). There, we try to allocate our crypto transforms through crypto_alloc_hash(). In our scenario, it then can happen that crypto_alloc_hash() fails with -EINTR from crypto_larval_wait(), thus we bail out and release the socket via sk_common_release(), sctp_destroy_sock() and hit the NULL pointer dereference as soon as we try to access members in the endpoint during sctp_endpoint_free(), since endpoint at that time is still NULL. Now, if we have that case, we do not need to do any cleanup work and just leave the destruction handler. Signed-off-by: Daniel Borkmann Acked-by: Neil Horman Acked-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/net/sctp/socket.c b/net/sctp/socket.c index f631c5f..6abb1ca 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -4003,6 +4003,12 @@ SCTP_STATIC void sctp_destroy_sock(struct sock *sk) /* Release our hold on the endpoint. */ sp = sctp_sk(sk); + /* This could happen during socket init, thus we bail out + * early, since the rest of the below is not setup either. + */ + if (sp->ep == NULL) + return; + if (sp->do_auto_asconf) { sp->do_auto_asconf = 0; list_del(&sp->auto_asconf_list); -- cgit v0.10.2 From 7cdbac71f911494aa7d0343be23c092ca84a5ed4 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 11 Jun 2013 02:52:47 -0700 Subject: netlink: fix error propagation in netlink_mmap() Return the error if something went wrong instead of unconditionally returning 0. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index d0b3dd6..57ee84d 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -371,7 +371,7 @@ static int netlink_mmap(struct file *file, struct socket *sock, err = 0; out: mutex_unlock(&nlk->pg_vec_lock); - return 0; + return err; } static void netlink_frame_flush_dcache(const struct nl_mmap_hdr *hdr) -- cgit v0.10.2 From 071ff9a36cb08b5a2b099fcdb45b63a61618f928 Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Tue, 11 Jun 2013 08:24:05 -0700 Subject: clk: samsung: Fix pll36xx_recalc_rate to handle kdiv properly The KDIV value is often listed as unsigned but it needs to be treated as a 16-bit signed value when using it in calculations. Fix our rate recalculation to do this correctly. Before doing this, I tried setting EPLL on exynos5250 to: rate, m, p, s, k = 80000000, 107, 2, 4, 43691 This rate is exactly from the table in the exynos5250 user manual. I read this back as 80750003 with: cat /sys/kernel/debug/clk/fin_pll/fout_epll/clk_rate After this patch, it reads back as 80000003 Signed-off-by: Doug Anderson Acked-by: Kukjin Kim Reviewed-by: Vikas Sajjan Signed-off-by: Mike Turquette diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c index 89135f6..362f12d 100644 --- a/drivers/clk/samsung/clk-pll.c +++ b/drivers/clk/samsung/clk-pll.c @@ -111,7 +111,8 @@ static unsigned long samsung_pll36xx_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct samsung_clk_pll36xx *pll = to_clk_pll36xx(hw); - u32 mdiv, pdiv, sdiv, kdiv, pll_con0, pll_con1; + u32 mdiv, pdiv, sdiv, pll_con0, pll_con1; + s16 kdiv; u64 fvco = parent_rate; pll_con0 = __raw_readl(pll->con_reg); @@ -119,7 +120,7 @@ static unsigned long samsung_pll36xx_recalc_rate(struct clk_hw *hw, mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK; pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK; sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK; - kdiv = pll_con1 & PLL36XX_KDIV_MASK; + kdiv = (s16)(pll_con1 & PLL36XX_KDIV_MASK); fvco *= (mdiv << 16) + kdiv; do_div(fvco, (pdiv << sdiv)); -- cgit v0.10.2 From 58e8eedf18577c7eac722d5d1f190507ea263d1b Mon Sep 17 00:00:00 2001 From: Yoshihiro YUNOMAE Date: Tue, 23 Apr 2013 10:32:39 +0900 Subject: tracing: Fix outputting formats of x86-tsc and counter when use trace_clock Outputting formats of x86-tsc and counter should be a raw format, but after applying the patch(2b6080f28c7cc3efc8625ab71495aae89aeb63a0), the format was changed to nanosec. This is because the global variable trace_clock_id was used. When we use multiple buffers, clock_id of each sub-buffer should be used. Then, this patch uses tr->clock_id instead of the global variable trace_clock_id. [ Basically, this fixes a regression where the multibuffer code changed the trace_clock file to update tr->clock_id but the traces still use the old global trace_clock_id variable, negating the file's effect. The global trace_clock_id variable is obsolete and removed. - SR ] Link: http://lkml.kernel.org/r/20130423013239.22334.7394.stgit@yunodevel Signed-off-by: Yoshihiro YUNOMAE Signed-off-by: Steven Rostedt diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 1a41023..e71a8be 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -652,8 +652,6 @@ static struct { ARCH_TRACE_CLOCKS }; -int trace_clock_id; - /* * trace_parser_get_init - gets the buffer for trace parser */ @@ -2826,7 +2824,7 @@ __tracing_open(struct inode *inode, struct file *file, bool snapshot) iter->iter_flags |= TRACE_FILE_ANNOTATE; /* Output in nanoseconds only if we are using a clock in nanoseconds. */ - if (trace_clocks[trace_clock_id].in_ns) + if (trace_clocks[tr->clock_id].in_ns) iter->iter_flags |= TRACE_FILE_TIME_IN_NS; /* stop the trace while dumping if we are not opening "snapshot" */ @@ -3825,7 +3823,7 @@ static int tracing_open_pipe(struct inode *inode, struct file *filp) iter->iter_flags |= TRACE_FILE_LAT_FMT; /* Output in nanoseconds only if we are using a clock in nanoseconds. */ - if (trace_clocks[trace_clock_id].in_ns) + if (trace_clocks[tr->clock_id].in_ns) iter->iter_flags |= TRACE_FILE_TIME_IN_NS; iter->cpu_file = tc->cpu; @@ -5095,7 +5093,7 @@ tracing_stats_read(struct file *filp, char __user *ubuf, cnt = ring_buffer_bytes_cpu(trace_buf->buffer, cpu); trace_seq_printf(s, "bytes: %ld\n", cnt); - if (trace_clocks[trace_clock_id].in_ns) { + if (trace_clocks[tr->clock_id].in_ns) { /* local or global for trace_clock */ t = ns2usecs(ring_buffer_oldest_event_ts(trace_buf->buffer, cpu)); usec_rem = do_div(t, USEC_PER_SEC); diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 711ca7d..20572ed 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -700,8 +700,6 @@ enum print_line_t print_trace_line(struct trace_iterator *iter); extern unsigned long trace_flags; -extern int trace_clock_id; - /* Standard output formatting function used for function return traces */ #ifdef CONFIG_FUNCTION_GRAPH_TRACER -- cgit v0.10.2 From d7880812b3594d3c6dcbe3cfd71dabb17347d082 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 10 Jun 2013 16:52:03 +0200 Subject: idle: Add the stack canary init to cpu_startup_entry() Moving x86 to the generic idle implementation (commit 7d1a9417 "x86: Use generic idle loop") wreckaged the stack protector. I stupidly missed that boot_init_stack_canary() must be inlined from a function which never returns, but I put that call into arch_cpu_idle_prepare() which of course returns. I pondered to play tricks with arch_cpu_idle_prepare() first, but then I noticed, that the other archs which have implemented the stackprotector (ARM and SH) do not initialize the canary for the non-boot cpus. So I decided to move the boot_init_stack_canary() call into cpu_startup_entry() ifdeffed with an CONFIG_X86 for now. This #ifdef is just a temporary measure as I don't want to inflict the boot_init_stack_canary() call on ARM and SH that late in the cycle. I'll queue a patch for 3.11 which removes the #ifdef if the ARM/SH maintainers have no objection. Reported-by: Wouter van Kesteren Cc: x86@kernel.org Cc: Russell King Cc: Paul Mundt Signed-off-by: Thomas Gleixner diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 4e7a37f..81a5f5e 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -277,18 +277,6 @@ void exit_idle(void) } #endif -void arch_cpu_idle_prepare(void) -{ - /* - * If we're the non-boot CPU, nothing set the stack canary up - * for us. CPU0 already has it initialized but no harm in - * doing it again. This is a good place for updating it, as - * we wont ever return from this function (so the invalid - * canaries already on the stack wont ever trigger). - */ - boot_init_stack_canary(); -} - void arch_cpu_idle_enter(void) { local_touch_nmi(); diff --git a/kernel/cpu/idle.c b/kernel/cpu/idle.c index d5585f5..bf2ee1a 100644 --- a/kernel/cpu/idle.c +++ b/kernel/cpu/idle.c @@ -5,6 +5,7 @@ #include #include #include +#include #include @@ -112,6 +113,21 @@ static void cpu_idle_loop(void) void cpu_startup_entry(enum cpuhp_state state) { + /* + * This #ifdef needs to die, but it's too late in the cycle to + * make this generic (arm and sh have never invoked the canary + * init for the non boot cpus!). Will be fixed in 3.11 + */ +#ifdef CONFIG_X86 + /* + * If we're the non-boot CPU, nothing set the stack canary up + * for us. The boot CPU already has it initialized but no harm + * in doing it again. This is a good place for updating it, as + * we wont ever return from this function (so the invalid + * canaries already on the stack wont ever trigger). + */ + boot_init_stack_canary(); +#endif current_set_polling(); arch_cpu_idle_prepare(); cpu_idle_loop(); -- cgit v0.10.2 From 0b63cc3ce11822ac96a334a345640f524212cd6b Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 4 Jun 2013 00:05:07 +0200 Subject: clk: spear: fix build error for spear3xx This patch is required to be able to disable spear320 support after the spear320_clk_init() prototype changed for the real function but not for the dummy. Signed-off-by: Arnd Bergmann Acked-by: Viresh Kumar Signed-off-by: Mike Turquette diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c index f9ec43f..080c3c5 100644 --- a/drivers/clk/spear/spear3xx_clock.c +++ b/drivers/clk/spear/spear3xx_clock.c @@ -369,7 +369,7 @@ static void __init spear320_clk_init(void __iomem *soc_config_base) clk_register_clkdev(clk, NULL, "60100000.serial"); } #else -static inline void spear320_clk_init(void) { } +static inline void spear320_clk_init(void __iomem *soc_config_base) { } #endif void __init spear3xx_clk_init(void __iomem *misc_base, void __iomem *soc_config_base) -- cgit v0.10.2 From d343f4e8d6e4e4237b25b32e4f6a09d1281d4ca3 Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Tue, 11 Jun 2013 13:41:47 +0300 Subject: usb: chipidea: fix no transceiver case Since usb phy code does return ERR_PTR() values, make sure that we don't end up dereferencing them. This is a problem, for example, on platforms that don't register a phy for chipidea since b7fa5c2a ("usb: phy: return -ENXIO when PHY layer isn't enabled"). Signed-off-by: Alexander Shishkin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 519ead2..b501346 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -1678,8 +1678,11 @@ static int udc_start(struct ci13xxx *ci) ci->gadget.ep0 = &ci->ep0in->ep; - if (ci->global_phy) + if (ci->global_phy) { ci->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); + if (IS_ERR(ci->transceiver)) + ci->transceiver = NULL; + } if (ci->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) { if (ci->transceiver == NULL) { @@ -1694,7 +1697,7 @@ static int udc_start(struct ci13xxx *ci) goto put_transceiver; } - if (!IS_ERR_OR_NULL(ci->transceiver)) { + if (ci->transceiver) { retval = otg_set_peripheral(ci->transceiver->otg, &ci->gadget); if (retval) @@ -1711,7 +1714,7 @@ static int udc_start(struct ci13xxx *ci) return retval; remove_trans: - if (!IS_ERR_OR_NULL(ci->transceiver)) { + if (ci->transceiver) { otg_set_peripheral(ci->transceiver->otg, NULL); if (ci->global_phy) usb_put_phy(ci->transceiver); @@ -1719,7 +1722,7 @@ remove_trans: dev_err(dev, "error = %i\n", retval); put_transceiver: - if (!IS_ERR_OR_NULL(ci->transceiver) && ci->global_phy) + if (ci->transceiver && ci->global_phy) usb_put_phy(ci->transceiver); destroy_eps: destroy_eps(ci); @@ -1747,7 +1750,7 @@ static void udc_stop(struct ci13xxx *ci) dma_pool_destroy(ci->td_pool); dma_pool_destroy(ci->qh_pool); - if (!IS_ERR_OR_NULL(ci->transceiver)) { + if (ci->transceiver) { otg_set_peripheral(ci->transceiver->otg, NULL); if (ci->global_phy) usb_put_phy(ci->transceiver); -- cgit v0.10.2 From 0c3f3dc68bb6e6950e8cd7851e7778c550e8dfb4 Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Tue, 11 Jun 2013 13:41:48 +0300 Subject: usb: chipidea: fix id change handling Re-enable chipidea irq even if there's no role changing to do. This is a problem since b183c19f ("USB: chipidea: re-order irq handling to avoid unhandled irqs"); when it manifests, chipidea irq gets disabled for good. Cc: stable@vger.kernel.org # v3.7 Signed-off-by: Alexander Shishkin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 49b098b..475c9c1 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -276,8 +276,9 @@ static void ci_role_work(struct work_struct *work) ci_role_stop(ci); ci_role_start(ci, role); - enable_irq(ci->irq); } + + enable_irq(ci->irq); } static irqreturn_t ci_irq(int irq, void *data) -- cgit v0.10.2 From 346f372f7b72a05bfa9b4e6d1b1e5de289a18d8a Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Thu, 6 Jun 2013 13:58:18 +0530 Subject: clk: exynos5250: Add CLK_IGNORE_UNUSED flag for pmu clock Currently 'pmu' clock is not handled by any of the drivers. Also before the introduction of CCF, this clock was not defined, hence was left enabled always. When this clock is disabled, software reset register becomes inaccessible and system reboot doesn't work. Upon restoring the default behaviour, system reboot starts working. Signed-off-by: Tushar Behera Signed-off-by: Mike Turquette diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c index b6d79c0..22d7699 100644 --- a/drivers/clk/samsung/clk-exynos5250.c +++ b/drivers/clk/samsung/clk-exynos5250.c @@ -378,7 +378,7 @@ struct samsung_gate_clock exynos5250_gate_clks[] __initdata = { GATE(hsi2c3, "hsi2c3", "aclk66", GATE_IP_PERIC, 31, 0, 0), GATE(chipid, "chipid", "aclk66", GATE_IP_PERIS, 0, 0, 0), GATE(sysreg, "sysreg", "aclk66", GATE_IP_PERIS, 1, 0, 0), - GATE(pmu, "pmu", "aclk66", GATE_IP_PERIS, 2, 0, 0), + GATE(pmu, "pmu", "aclk66", GATE_IP_PERIS, 2, CLK_IGNORE_UNUSED, 0), GATE(tzpc0, "tzpc0", "aclk66", GATE_IP_PERIS, 6, 0, 0), GATE(tzpc1, "tzpc1", "aclk66", GATE_IP_PERIS, 7, 0, 0), GATE(tzpc2, "tzpc2", "aclk66", GATE_IP_PERIS, 8, 0, 0), -- cgit v0.10.2 From 19a6afb23e5d323e1245baa4e62755492b2f1200 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Sat, 8 Jun 2013 14:17:41 +0800 Subject: tuntap: set SOCK_ZEROCOPY flag during open Commit 54f968d6efdbf7dec36faa44fc11f01b0e4d1990 (tuntap: move socket to tun_file) forgets to set SOCK_ZEROCOPY flag, which will prevent vhost_net from doing zercopy w/ tap. This patch fixes this by setting it during file open. Cc: Michael S. Tsirkin Signed-off-by: Jason Wang Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller diff --git a/drivers/net/tun.c b/drivers/net/tun.c index b1cbfbc..bfa9bb4 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -2159,6 +2159,8 @@ static int tun_chr_open(struct inode *inode, struct file * file) set_bit(SOCK_EXTERNALLY_ALLOCATED, &tfile->socket.flags); INIT_LIST_HEAD(&tfile->next); + sock_set_flag(&tfile->sk, SOCK_ZEROCOPY); + return 0; } -- cgit v0.10.2 From 76c455decbbad31de21c727edb184a963f42b40b Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Sat, 8 Jun 2013 15:00:53 +0200 Subject: team: check return value of team_get_port_by_index_rcu() for NULL team_get_port_by_index_rcu() might return NULL due to race between port removal and skb tx path. Panic is easily triggeable when txing packets and adding/removing port in a loop. introduced by commit 3d249d4ca "net: introduce ethernet teaming device" and commit 753f993911b "team: introduce random mode" (for random mode) Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/net/team/team_mode_random.c b/drivers/net/team/team_mode_random.c index 5ca14d4..7f032e2 100644 --- a/drivers/net/team/team_mode_random.c +++ b/drivers/net/team/team_mode_random.c @@ -28,6 +28,8 @@ static bool rnd_transmit(struct team *team, struct sk_buff *skb) port_index = random_N(team->en_port_count); port = team_get_port_by_index_rcu(team, port_index); + if (unlikely(!port)) + goto drop; port = team_get_first_port_txable_rcu(team, port); if (unlikely(!port)) goto drop; diff --git a/drivers/net/team/team_mode_roundrobin.c b/drivers/net/team/team_mode_roundrobin.c index d268e4d..472623f 100644 --- a/drivers/net/team/team_mode_roundrobin.c +++ b/drivers/net/team/team_mode_roundrobin.c @@ -32,6 +32,8 @@ static bool rr_transmit(struct team *team, struct sk_buff *skb) port_index = rr_priv(team)->sent_packets++ % team->en_port_count; port = team_get_port_by_index_rcu(team, port_index); + if (unlikely(!port)) + goto drop; port = team_get_first_port_txable_rcu(team, port); if (unlikely(!port)) goto drop; -- cgit v0.10.2 From 72df935d985c1575ed44ad2c8c653b28147993fa Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Sat, 8 Jun 2013 15:00:54 +0200 Subject: team: move add to port list before port enablement team_port_enable() adds port to port_hashlist. Reader sees port in team_get_port_by_index_rcu() and returns it, but team_get_first_port_txable_rcu() tries to go through port_list, where the port is not inserted yet -> NULL pointer dereference. Fix this by reordering port_list and port_hashlist insertion. Panic is easily triggeable when txing packets and adding/removing port in a loop. Introduced by commit 3d249d4c "net: introduce ethernet teaming device" Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index d016a76..b305105 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -1092,8 +1092,8 @@ static int team_port_add(struct team *team, struct net_device *port_dev) } port->index = -1; - team_port_enable(team, port); list_add_tail_rcu(&port->list, &team->port_list); + team_port_enable(team, port); __team_compute_features(team); __team_port_change_port_added(port, !!netif_carrier_ok(port_dev)); __team_options_change_check(team); -- cgit v0.10.2 From b79462a8b9f9a452edc20c64a70a89ba3b0a6a88 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Sat, 8 Jun 2013 15:00:55 +0200 Subject: team: fix checks in team_get_first_port_txable_rcu() should be checked if "cur" is txable, not "port". Introduced by commit 6e88e1357c "team: use function team_port_txable() for determing enabled and up port" Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/include/linux/if_team.h b/include/linux/if_team.h index 4474557..16fae64 100644 --- a/include/linux/if_team.h +++ b/include/linux/if_team.h @@ -249,12 +249,12 @@ team_get_first_port_txable_rcu(struct team *team, struct team_port *port) return port; cur = port; list_for_each_entry_continue_rcu(cur, &team->port_list, list) - if (team_port_txable(port)) + if (team_port_txable(cur)) return cur; list_for_each_entry_rcu(cur, &team->port_list, list) { if (cur == port) break; - if (team_port_txable(port)) + if (team_port_txable(cur)) return cur; } return NULL; -- cgit v0.10.2 From 5939212df87e9377dd3813904264b94a962d19ca Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 29 May 2013 10:45:09 +0200 Subject: HID: multitouch: prevent memleak with the allocated name mt_free_input_name() was never called during .remove(): hid_hw_stop() removes the hid_input items in hdev->inputs, and so the list is therefore empty after the call. In the end, we never free the special names that has been allocated during .probe(). Restore the original name before freeing it to avoid acessing already freed pointer. This fixes a regression introduced by 49a5a827a ("HID: multitouch: append " Pen" to the name of the stylus input") Signed-off-by: Benjamin Tissoires Signed-off-by: Jiri Kosina diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index dc3ae5c..d39a5ce 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -264,9 +264,12 @@ static struct mt_class mt_classes[] = { static void mt_free_input_name(struct hid_input *hi) { struct hid_device *hdev = hi->report->device; + const char *name = hi->input->name; - if (hi->input->name != hdev->name) - kfree(hi->input->name); + if (name != hdev->name) { + hi->input->name = hdev->name; + kfree(name); + } } static ssize_t mt_show_quirks(struct device *dev, @@ -1040,11 +1043,11 @@ static void mt_remove(struct hid_device *hdev) struct hid_input *hi; sysfs_remove_group(&hdev->dev.kobj, &mt_attribute_group); - hid_hw_stop(hdev); - list_for_each_entry(hi, &hdev->inputs, list) mt_free_input_name(hi); + hid_hw_stop(hdev); + kfree(td); hid_set_drvdata(hdev, NULL); } -- cgit v0.10.2 From 3813f5ca9ab7a00e80a17aab34f155453c66c78a Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Thu, 6 Jun 2013 12:41:17 -0400 Subject: drm/radeon: do not try to uselessly update virtual memory pagetable If a buffer is never bound to a virtual memory pagetable than don't try to unbind it. Only drawback is that we don't update the pagetable when unbinding the ib pool buffer which is fine because it only happens at suspend or module unload/shutdown. Fixes spurious messages about buffers without VM mappings. E.g.: radeon 0000:01:00.0: bo ffff88020afac400 don't has a mapping in vm ffff88021ca2b900 Cc: stable@kernel.org Signed-off-by: Jerome Glisse Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index 2c1341f..43ec4a4 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -1197,11 +1197,13 @@ int radeon_vm_bo_update_pte(struct radeon_device *rdev, int radeon_vm_bo_rmv(struct radeon_device *rdev, struct radeon_bo_va *bo_va) { - int r; + int r = 0; mutex_lock(&rdev->vm_manager.lock); mutex_lock(&bo_va->vm->mutex); - r = radeon_vm_bo_update_pte(rdev, bo_va->vm, bo_va->bo, NULL); + if (bo_va->soffset) { + r = radeon_vm_bo_update_pte(rdev, bo_va->vm, bo_va->bo, NULL); + } mutex_unlock(&rdev->vm_manager.lock); list_del(&bo_va->vm_list); mutex_unlock(&bo_va->vm->mutex); -- cgit v0.10.2 From 089920f21db0108fb105ecfd81de4c92d88f06d0 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Thu, 6 Jun 2013 17:51:21 -0400 Subject: drm/radeon: fix write back suspend regression with uvd v2 UVD ring can't use scratch thus it does need writeback buffer to keep a valid address or radeon_ring_backup will trigger a kernel fault. It's ok to not unpin the write back buffer on suspend as it leave in gtt and thus does not need eviction. v2: Fix the uvd case. Reported and tracked by Wojtek Signed-off-by: Jerome Glisse Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 1899738..b0dc0b6 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -244,16 +244,6 @@ void radeon_scratch_free(struct radeon_device *rdev, uint32_t reg) */ void radeon_wb_disable(struct radeon_device *rdev) { - int r; - - if (rdev->wb.wb_obj) { - r = radeon_bo_reserve(rdev->wb.wb_obj, false); - if (unlikely(r != 0)) - return; - radeon_bo_kunmap(rdev->wb.wb_obj); - radeon_bo_unpin(rdev->wb.wb_obj); - radeon_bo_unreserve(rdev->wb.wb_obj); - } rdev->wb.enabled = false; } @@ -269,6 +259,11 @@ void radeon_wb_fini(struct radeon_device *rdev) { radeon_wb_disable(rdev); if (rdev->wb.wb_obj) { + if (!radeon_bo_reserve(rdev->wb.wb_obj, false)) { + radeon_bo_kunmap(rdev->wb.wb_obj); + radeon_bo_unpin(rdev->wb.wb_obj); + radeon_bo_unreserve(rdev->wb.wb_obj); + } radeon_bo_unref(&rdev->wb.wb_obj); rdev->wb.wb = NULL; rdev->wb.wb_obj = NULL; @@ -295,26 +290,26 @@ int radeon_wb_init(struct radeon_device *rdev) dev_warn(rdev->dev, "(%d) create WB bo failed\n", r); return r; } - } - r = radeon_bo_reserve(rdev->wb.wb_obj, false); - if (unlikely(r != 0)) { - radeon_wb_fini(rdev); - return r; - } - r = radeon_bo_pin(rdev->wb.wb_obj, RADEON_GEM_DOMAIN_GTT, - &rdev->wb.gpu_addr); - if (r) { + r = radeon_bo_reserve(rdev->wb.wb_obj, false); + if (unlikely(r != 0)) { + radeon_wb_fini(rdev); + return r; + } + r = radeon_bo_pin(rdev->wb.wb_obj, RADEON_GEM_DOMAIN_GTT, + &rdev->wb.gpu_addr); + if (r) { + radeon_bo_unreserve(rdev->wb.wb_obj); + dev_warn(rdev->dev, "(%d) pin WB bo failed\n", r); + radeon_wb_fini(rdev); + return r; + } + r = radeon_bo_kmap(rdev->wb.wb_obj, (void **)&rdev->wb.wb); radeon_bo_unreserve(rdev->wb.wb_obj); - dev_warn(rdev->dev, "(%d) pin WB bo failed\n", r); - radeon_wb_fini(rdev); - return r; - } - r = radeon_bo_kmap(rdev->wb.wb_obj, (void **)&rdev->wb.wb); - radeon_bo_unreserve(rdev->wb.wb_obj); - if (r) { - dev_warn(rdev->dev, "(%d) map WB bo failed\n", r); - radeon_wb_fini(rdev); - return r; + if (r) { + dev_warn(rdev->dev, "(%d) map WB bo failed\n", r); + radeon_wb_fini(rdev); + return r; + } } /* clear wb memory */ diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c index 5b937df..ddb8f8e 100644 --- a/drivers/gpu/drm/radeon/radeon_fence.c +++ b/drivers/gpu/drm/radeon/radeon_fence.c @@ -63,7 +63,9 @@ static void radeon_fence_write(struct radeon_device *rdev, u32 seq, int ring) { struct radeon_fence_driver *drv = &rdev->fence_drv[ring]; if (likely(rdev->wb.enabled || !drv->scratch_reg)) { - *drv->cpu_addr = cpu_to_le32(seq); + if (drv->cpu_addr) { + *drv->cpu_addr = cpu_to_le32(seq); + } } else { WREG32(drv->scratch_reg, seq); } @@ -84,7 +86,11 @@ static u32 radeon_fence_read(struct radeon_device *rdev, int ring) u32 seq = 0; if (likely(rdev->wb.enabled || !drv->scratch_reg)) { - seq = le32_to_cpu(*drv->cpu_addr); + if (drv->cpu_addr) { + seq = le32_to_cpu(*drv->cpu_addr); + } else { + seq = lower_32_bits(atomic64_read(&drv->last_seq)); + } } else { seq = RREG32(drv->scratch_reg); } diff --git a/drivers/gpu/drm/radeon/radeon_uvd.c b/drivers/gpu/drm/radeon/radeon_uvd.c index 906e5c0..9f55ade 100644 --- a/drivers/gpu/drm/radeon/radeon_uvd.c +++ b/drivers/gpu/drm/radeon/radeon_uvd.c @@ -159,7 +159,17 @@ int radeon_uvd_suspend(struct radeon_device *rdev) if (!r) { radeon_bo_kunmap(rdev->uvd.vcpu_bo); radeon_bo_unpin(rdev->uvd.vcpu_bo); + rdev->uvd.cpu_addr = NULL; + if (!radeon_bo_pin(rdev->uvd.vcpu_bo, RADEON_GEM_DOMAIN_CPU, NULL)) { + radeon_bo_kmap(rdev->uvd.vcpu_bo, &rdev->uvd.cpu_addr); + } radeon_bo_unreserve(rdev->uvd.vcpu_bo); + + if (rdev->uvd.cpu_addr) { + radeon_fence_driver_start_ring(rdev, R600_RING_TYPE_UVD_INDEX); + } else { + rdev->fence_drv[R600_RING_TYPE_UVD_INDEX].cpu_addr = NULL; + } } return r; } @@ -178,6 +188,10 @@ int radeon_uvd_resume(struct radeon_device *rdev) return r; } + /* Have been pin in cpu unmap unpin */ + radeon_bo_kunmap(rdev->uvd.vcpu_bo); + radeon_bo_unpin(rdev->uvd.vcpu_bo); + r = radeon_bo_pin(rdev->uvd.vcpu_bo, RADEON_GEM_DOMAIN_VRAM, &rdev->uvd.gpu_addr); if (r) { -- cgit v0.10.2 From 757aee0f7177b7c7528aa0c120fc131aca8bf641 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Wed, 24 Apr 2013 13:05:32 +0300 Subject: Bluetooth: Fix checks for LE support on LE-only controllers LE-only controllers do not support extended features so any kind of host feature bit checks do not make sense for them. This patch fixes code used for both single-mode (LE-only) and dual-mode (BR/EDR/LE) to use the HCI_LE_ENABLED flag instead of the "Host LE supported" feature bit for LE support tests. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan Signed-off-by: John W. Linville diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 35fef22..5e93b24 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -2700,7 +2700,7 @@ static int start_discovery(struct sock *sk, struct hci_dev *hdev, break; case DISCOV_TYPE_LE: - if (!lmp_host_le_capable(hdev)) { + if (!test_bit(HCI_LE_ENABLED, &hdev->dev_flags)) { err = cmd_status(sk, hdev->id, MGMT_OP_START_DISCOVERY, MGMT_STATUS_NOT_SUPPORTED); mgmt_pending_remove(cmd); diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c index b2296d3..b5562ab 100644 --- a/net/bluetooth/smp.c +++ b/net/bluetooth/smp.c @@ -770,7 +770,7 @@ int smp_conn_security(struct hci_conn *hcon, __u8 sec_level) BT_DBG("conn %p hcon %p level 0x%2.2x", conn, hcon, sec_level); - if (!lmp_host_le_capable(hcon->hdev)) + if (!test_bit(HCI_LE_ENABLED, &hcon->hdev->dev_flags)) return 1; if (sec_level == BT_SECURITY_LOW) @@ -851,7 +851,7 @@ int smp_sig_channel(struct l2cap_conn *conn, struct sk_buff *skb) __u8 reason; int err = 0; - if (!lmp_host_le_capable(conn->hcon->hdev)) { + if (!test_bit(HCI_LE_ENABLED, &conn->hcon->hdev->dev_flags)) { err = -ENOTSUPP; reason = SMP_PAIRING_NOTSUPP; goto done; -- cgit v0.10.2 From 22f2efed35e02a7c0b1ec73cfe790b1e3d207f4b Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Mon, 13 May 2013 18:15:32 -0700 Subject: Bluetooth: btmrvl: support Marvell Bluetooth device SD8897 The register offsets have been changed in SD8897 and newer chips. Define a new btmrvl_sdio_card_reg map for SD88xx. Signed-off-by: Bing Zhao Signed-off-by: Frank Huang Signed-off-by: Gustavo Padovan Signed-off-by: John W. Linville diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index fdfd61a..11a6104 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -201,7 +201,7 @@ config BT_MRVL The core driver to support Marvell Bluetooth devices. This driver is required if you want to support - Marvell Bluetooth devices, such as 8688/8787/8797. + Marvell Bluetooth devices, such as 8688/8787/8797/8897. Say Y here to compile Marvell Bluetooth driver into the kernel or say M to compile it as module. @@ -214,7 +214,7 @@ config BT_MRVL_SDIO The driver for Marvell Bluetooth chipsets with SDIO interface. This driver is required if you want to use Marvell Bluetooth - devices with SDIO interface. Currently SD8688/SD8787/SD8797 + devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8897 chipsets are supported. Say Y here to compile support for Marvell BT-over-SDIO driver diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c index c63488c..13693b7 100644 --- a/drivers/bluetooth/btmrvl_sdio.c +++ b/drivers/bluetooth/btmrvl_sdio.c @@ -82,6 +82,23 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_87xx = { .io_port_2 = 0x7a, }; +static const struct btmrvl_sdio_card_reg btmrvl_reg_88xx = { + .cfg = 0x00, + .host_int_mask = 0x02, + .host_intstatus = 0x03, + .card_status = 0x50, + .sq_read_base_addr_a0 = 0x60, + .sq_read_base_addr_a1 = 0x61, + .card_revision = 0xbc, + .card_fw_status0 = 0xc0, + .card_fw_status1 = 0xc1, + .card_rx_len = 0xc2, + .card_rx_unit = 0xc3, + .io_port_0 = 0xd8, + .io_port_1 = 0xd9, + .io_port_2 = 0xda, +}; + static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = { .helper = "mrvl/sd8688_helper.bin", .firmware = "mrvl/sd8688.bin", @@ -103,6 +120,13 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = { .sd_blksz_fw_dl = 256, }; +static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = { + .helper = NULL, + .firmware = "mrvl/sd8897_uapsta.bin", + .reg = &btmrvl_reg_88xx, + .sd_blksz_fw_dl = 256, +}; + static const struct sdio_device_id btmrvl_sdio_ids[] = { /* Marvell SD8688 Bluetooth device */ { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9105), @@ -116,6 +140,9 @@ static const struct sdio_device_id btmrvl_sdio_ids[] = { /* Marvell SD8797 Bluetooth device */ { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912A), .driver_data = (unsigned long) &btmrvl_sdio_sd8797 }, + /* Marvell SD8897 Bluetooth device */ + { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912E), + .driver_data = (unsigned long) &btmrvl_sdio_sd8897 }, { } /* Terminating entry */ }; @@ -1194,3 +1221,4 @@ MODULE_FIRMWARE("mrvl/sd8688_helper.bin"); MODULE_FIRMWARE("mrvl/sd8688.bin"); MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin"); MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin"); +MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin"); -- cgit v0.10.2 From cb3b3152b2f5939d67005cff841a1ca748b19888 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Tue, 28 May 2013 13:46:30 +0300 Subject: Bluetooth: Fix missing length checks for L2CAP signalling PDUs There has been code in place to check that the L2CAP length header matches the amount of data received, but many PDU handlers have not been checking that the data received actually matches that expected by the specific PDU. This patch adds passing the length header to the specific handler functions and ensures that those functions fail cleanly in the case of an incorrect amount of data. Signed-off-by: Johan Hedberg Cc: stable@vger.kernel.org Signed-off-by: Gustavo Padovan Signed-off-by: John W. Linville diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index a76d1ac..24bee07 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -3677,10 +3677,14 @@ static void l2cap_conf_rfc_get(struct l2cap_chan *chan, void *rsp, int len) } static inline int l2cap_command_rej(struct l2cap_conn *conn, - struct l2cap_cmd_hdr *cmd, u8 *data) + struct l2cap_cmd_hdr *cmd, u16 cmd_len, + u8 *data) { struct l2cap_cmd_rej_unk *rej = (struct l2cap_cmd_rej_unk *) data; + if (cmd_len < sizeof(*rej)) + return -EPROTO; + if (rej->reason != L2CAP_REJ_NOT_UNDERSTOOD) return 0; @@ -3829,11 +3833,14 @@ sendresp: } static int l2cap_connect_req(struct l2cap_conn *conn, - struct l2cap_cmd_hdr *cmd, u8 *data) + struct l2cap_cmd_hdr *cmd, u16 cmd_len, u8 *data) { struct hci_dev *hdev = conn->hcon->hdev; struct hci_conn *hcon = conn->hcon; + if (cmd_len < sizeof(struct l2cap_conn_req)) + return -EPROTO; + hci_dev_lock(hdev); if (test_bit(HCI_MGMT, &hdev->dev_flags) && !test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &hcon->flags)) @@ -3847,7 +3854,8 @@ static int l2cap_connect_req(struct l2cap_conn *conn, } static int l2cap_connect_create_rsp(struct l2cap_conn *conn, - struct l2cap_cmd_hdr *cmd, u8 *data) + struct l2cap_cmd_hdr *cmd, u16 cmd_len, + u8 *data) { struct l2cap_conn_rsp *rsp = (struct l2cap_conn_rsp *) data; u16 scid, dcid, result, status; @@ -3855,6 +3863,9 @@ static int l2cap_connect_create_rsp(struct l2cap_conn *conn, u8 req[128]; int err; + if (cmd_len < sizeof(*rsp)) + return -EPROTO; + scid = __le16_to_cpu(rsp->scid); dcid = __le16_to_cpu(rsp->dcid); result = __le16_to_cpu(rsp->result); @@ -3952,6 +3963,9 @@ static inline int l2cap_config_req(struct l2cap_conn *conn, struct l2cap_chan *chan; int len, err = 0; + if (cmd_len < sizeof(*req)) + return -EPROTO; + dcid = __le16_to_cpu(req->dcid); flags = __le16_to_cpu(req->flags); @@ -3975,7 +3989,7 @@ static inline int l2cap_config_req(struct l2cap_conn *conn, /* Reject if config buffer is too small. */ len = cmd_len - sizeof(*req); - if (len < 0 || chan->conf_len + len > sizeof(chan->conf_req)) { + if (chan->conf_len + len > sizeof(chan->conf_req)) { l2cap_send_cmd(conn, cmd->ident, L2CAP_CONF_RSP, l2cap_build_conf_rsp(chan, rsp, L2CAP_CONF_REJECT, flags), rsp); @@ -4053,14 +4067,18 @@ unlock: } static inline int l2cap_config_rsp(struct l2cap_conn *conn, - struct l2cap_cmd_hdr *cmd, u8 *data) + struct l2cap_cmd_hdr *cmd, u16 cmd_len, + u8 *data) { struct l2cap_conf_rsp *rsp = (struct l2cap_conf_rsp *)data; u16 scid, flags, result; struct l2cap_chan *chan; - int len = le16_to_cpu(cmd->len) - sizeof(*rsp); + int len = cmd_len - sizeof(*rsp); int err = 0; + if (cmd_len < sizeof(*rsp)) + return -EPROTO; + scid = __le16_to_cpu(rsp->scid); flags = __le16_to_cpu(rsp->flags); result = __le16_to_cpu(rsp->result); @@ -4161,7 +4179,8 @@ done: } static inline int l2cap_disconnect_req(struct l2cap_conn *conn, - struct l2cap_cmd_hdr *cmd, u8 *data) + struct l2cap_cmd_hdr *cmd, u16 cmd_len, + u8 *data) { struct l2cap_disconn_req *req = (struct l2cap_disconn_req *) data; struct l2cap_disconn_rsp rsp; @@ -4169,6 +4188,9 @@ static inline int l2cap_disconnect_req(struct l2cap_conn *conn, struct l2cap_chan *chan; struct sock *sk; + if (cmd_len != sizeof(*req)) + return -EPROTO; + scid = __le16_to_cpu(req->scid); dcid = __le16_to_cpu(req->dcid); @@ -4208,12 +4230,16 @@ static inline int l2cap_disconnect_req(struct l2cap_conn *conn, } static inline int l2cap_disconnect_rsp(struct l2cap_conn *conn, - struct l2cap_cmd_hdr *cmd, u8 *data) + struct l2cap_cmd_hdr *cmd, u16 cmd_len, + u8 *data) { struct l2cap_disconn_rsp *rsp = (struct l2cap_disconn_rsp *) data; u16 dcid, scid; struct l2cap_chan *chan; + if (cmd_len != sizeof(*rsp)) + return -EPROTO; + scid = __le16_to_cpu(rsp->scid); dcid = __le16_to_cpu(rsp->dcid); @@ -4243,11 +4269,15 @@ static inline int l2cap_disconnect_rsp(struct l2cap_conn *conn, } static inline int l2cap_information_req(struct l2cap_conn *conn, - struct l2cap_cmd_hdr *cmd, u8 *data) + struct l2cap_cmd_hdr *cmd, u16 cmd_len, + u8 *data) { struct l2cap_info_req *req = (struct l2cap_info_req *) data; u16 type; + if (cmd_len != sizeof(*req)) + return -EPROTO; + type = __le16_to_cpu(req->type); BT_DBG("type 0x%4.4x", type); @@ -4294,11 +4324,15 @@ static inline int l2cap_information_req(struct l2cap_conn *conn, } static inline int l2cap_information_rsp(struct l2cap_conn *conn, - struct l2cap_cmd_hdr *cmd, u8 *data) + struct l2cap_cmd_hdr *cmd, u16 cmd_len, + u8 *data) { struct l2cap_info_rsp *rsp = (struct l2cap_info_rsp *) data; u16 type, result; + if (cmd_len != sizeof(*rsp)) + return -EPROTO; + type = __le16_to_cpu(rsp->type); result = __le16_to_cpu(rsp->result); @@ -5164,16 +5198,16 @@ static inline int l2cap_bredr_sig_cmd(struct l2cap_conn *conn, switch (cmd->code) { case L2CAP_COMMAND_REJ: - l2cap_command_rej(conn, cmd, data); + l2cap_command_rej(conn, cmd, cmd_len, data); break; case L2CAP_CONN_REQ: - err = l2cap_connect_req(conn, cmd, data); + err = l2cap_connect_req(conn, cmd, cmd_len, data); break; case L2CAP_CONN_RSP: case L2CAP_CREATE_CHAN_RSP: - err = l2cap_connect_create_rsp(conn, cmd, data); + err = l2cap_connect_create_rsp(conn, cmd, cmd_len, data); break; case L2CAP_CONF_REQ: @@ -5181,15 +5215,15 @@ static inline int l2cap_bredr_sig_cmd(struct l2cap_conn *conn, break; case L2CAP_CONF_RSP: - err = l2cap_config_rsp(conn, cmd, data); + err = l2cap_config_rsp(conn, cmd, cmd_len, data); break; case L2CAP_DISCONN_REQ: - err = l2cap_disconnect_req(conn, cmd, data); + err = l2cap_disconnect_req(conn, cmd, cmd_len, data); break; case L2CAP_DISCONN_RSP: - err = l2cap_disconnect_rsp(conn, cmd, data); + err = l2cap_disconnect_rsp(conn, cmd, cmd_len, data); break; case L2CAP_ECHO_REQ: @@ -5200,11 +5234,11 @@ static inline int l2cap_bredr_sig_cmd(struct l2cap_conn *conn, break; case L2CAP_INFO_REQ: - err = l2cap_information_req(conn, cmd, data); + err = l2cap_information_req(conn, cmd, cmd_len, data); break; case L2CAP_INFO_RSP: - err = l2cap_information_rsp(conn, cmd, data); + err = l2cap_information_rsp(conn, cmd, cmd_len, data); break; case L2CAP_CREATE_CHAN_REQ: -- cgit v0.10.2 From 96570ffcca0b872dc8626e97569d2697f374d868 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Wed, 29 May 2013 09:51:29 +0300 Subject: Bluetooth: Fix mgmt handling of power on failures If hci_dev_open fails we need to ensure that the corresponding mgmt_set_powered command gets an appropriate response. This patch fixes the missing response by adding a new mgmt_set_powered_failed function that's used to indicate a power on failure to mgmt. Since a situation with the device being rfkilled may require special handling in user space the patch uses a new dedicated mgmt status code for this. Signed-off-by: Johan Hedberg Cc: stable@vger.kernel.org Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan Signed-off-by: John W. Linville diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 35a57cd..7cb6d36 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -1117,6 +1117,7 @@ void hci_sock_dev_event(struct hci_dev *hdev, int event); int mgmt_control(struct sock *sk, struct msghdr *msg, size_t len); int mgmt_index_added(struct hci_dev *hdev); int mgmt_index_removed(struct hci_dev *hdev); +int mgmt_set_powered_failed(struct hci_dev *hdev, int err); int mgmt_powered(struct hci_dev *hdev, u8 powered); int mgmt_discoverable(struct hci_dev *hdev, u8 discoverable); int mgmt_connectable(struct hci_dev *hdev, u8 connectable); diff --git a/include/net/bluetooth/mgmt.h b/include/net/bluetooth/mgmt.h index 22980a7..9944c3e 100644 --- a/include/net/bluetooth/mgmt.h +++ b/include/net/bluetooth/mgmt.h @@ -42,6 +42,7 @@ #define MGMT_STATUS_NOT_POWERED 0x0f #define MGMT_STATUS_CANCELLED 0x10 #define MGMT_STATUS_INVALID_INDEX 0x11 +#define MGMT_STATUS_RFKILLED 0x12 struct mgmt_hdr { __le16 opcode; diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 33843c5..d817c93 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1555,11 +1555,15 @@ static const struct rfkill_ops hci_rfkill_ops = { static void hci_power_on(struct work_struct *work) { struct hci_dev *hdev = container_of(work, struct hci_dev, power_on); + int err; BT_DBG("%s", hdev->name); - if (hci_dev_open(hdev->id) < 0) + err = hci_dev_open(hdev->id); + if (err < 0) { + mgmt_set_powered_failed(hdev, err); return; + } if (test_bit(HCI_AUTO_OFF, &hdev->dev_flags)) queue_delayed_work(hdev->req_workqueue, &hdev->power_off, diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 5e93b24..f8ecbc7 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -3418,6 +3418,27 @@ new_settings: return err; } +int mgmt_set_powered_failed(struct hci_dev *hdev, int err) +{ + struct pending_cmd *cmd; + u8 status; + + cmd = mgmt_pending_find(MGMT_OP_SET_POWERED, hdev); + if (!cmd) + return -ENOENT; + + if (err == -ERFKILL) + status = MGMT_STATUS_RFKILLED; + else + status = MGMT_STATUS_FAILED; + + err = cmd_status(cmd->sk, hdev->id, MGMT_OP_SET_POWERED, status); + + mgmt_pending_remove(cmd); + + return err; +} + int mgmt_discoverable(struct hci_dev *hdev, u8 discoverable) { struct cmd_lookup match = { NULL, hdev }; -- cgit v0.10.2 From f873ded213d6d8c36354c0fc903af44da4fd6ac5 Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Wed, 29 May 2013 12:25:34 -0700 Subject: mwifiex: debugfs: Fix out of bounds array access When reading the contents of '/sys/kernel/debug/mwifiex/p2p0/info', the following panic occurs: $ cat /sys/kernel/debug/mwifiex/p2p0/info Unable to handle kernel paging request at virtual address 74706164 pgd = de530000 [74706164] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: phy_twl4030_usb omap2430 musb_hdrc mwifiex_sdio mwifiex CPU: 0 PID: 1635 Comm: cat Not tainted 3.10.0-rc1-00010-g1268390 #1 task: de16b6c0 ti: de048000 task.ti: de048000 PC is at strnlen+0xc/0x4c LR is at string+0x3c/0xf8 pc : [] lr : [] psr: a0000013 sp : de049e10 ip : c06efba0 fp : de6d2092 r10: bf01a260 r9 : ffffffff r8 : 74706164 r7 : 0000ffff r6 : ffffffff r5 : de6d209c r4 : 00000000 r3 : ff0a0004 r2 : 74706164 r1 : ffffffff r0 : 74706164 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 9e530019 DAC: 00000015 Process cat (pid: 1635, stack limit = 0xde048240) Stack: (0xde049e10 to 0xde04a000) 9e00: de6d2092 00000002 bf01a25e de6d209c 9e20: de049e80 c02c438c 0000000a ff0a0004 ffffffff 00000000 00000000 de049e48 9e40: 00000000 2192df6d ff0a0004 ffffffff 00000000 de6d2092 de049ef8 bef3cc00 9e60: de6b0000 dc358000 de6d2000 00000000 00000003 c02c45a4 bf01790c bf01a254 9e80: 74706164 bf018698 00000000 de59c3c0 de048000 de049f80 00001000 bef3cc00 9ea0: 00000008 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9ec0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9ee0: 00000000 00000000 00000000 00000001 00000000 00000000 6669776d 20786569 9f00: 20302e31 2e343128 392e3636 3231702e 00202933 00000000 00000003 c0294898 9f20: 00000000 00000000 00000000 00000000 de59c3c0 c0107c04 de554000 de59c3c0 9f40: 00001000 bef3cc00 de049f80 bef3cc00 de049f80 00000000 00000003 c0108a00 9f60: de048000 de59c3c0 00000000 00000000 de59c3c0 00001000 bef3cc00 c0108b60 9f80: 00000000 00000000 00001000 bef3cc00 00000003 00000003 c0014128 de048000 9fa0: 00000000 c0013f80 00001000 bef3cc00 00000003 bef3cc00 00001000 00000000 9fc0: 00001000 bef3cc00 00000003 00000003 00000001 00000001 00000001 00000003 9fe0: 00000000 bef3cbdc 00011984 b6f1127c 60000010 00000003 18dbdd2c 7f7bfffd [] (strnlen+0xc/0x4c) from [] (string+0x3c/0xf8) [] (string+0x3c/0xf8) from [] (vsnprintf+0x1e8/0x3e8) [] (vsnprintf+0x1e8/0x3e8) from [] (sprintf+0x18/0x24) [] (sprintf+0x18/0x24) from [] (mwifiex_info_read+0xfc/0x3e8 [mwifiex]) [] (mwifiex_info_read+0xfc/0x3e8 [mwifiex]) from [] (vfs_read+0xb0/0x144) [] (vfs_read+0xb0/0x144) from [] (SyS_read+0x44/0x70) [] (SyS_read+0x44/0x70) from [] (ret_fast_syscall+0x0/0x30) Code: e12fff1e e3510000 e1a02000 0a00000d (e5d03000) ---[ end trace ca98273dc605a04f ]--- The panic is caused by the mwifiex_info_read() routine assuming that there can only be four modes (0-3) which is an invalid assumption. For example, when testing P2P, the mode is '8' (P2P_CLIENT) so the code accesses data beyond the bounds of the bss_modes[] array which causes the panic. Fix this by updating bss_modes[] to support the current list of modes and adding a check to prevent the out-of-bounds access from occuring in the future when more modes are added. Signed-off-by: Mark A. Greer Acked-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/debugfs.c b/drivers/net/wireless/mwifiex/debugfs.c index 753b568..a5f9875 100644 --- a/drivers/net/wireless/mwifiex/debugfs.c +++ b/drivers/net/wireless/mwifiex/debugfs.c @@ -26,10 +26,17 @@ static struct dentry *mwifiex_dfs_dir; static char *bss_modes[] = { - "Unknown", - "Ad-hoc", - "Managed", - "Auto" + "UNSPECIFIED", + "ADHOC", + "STATION", + "AP", + "AP_VLAN", + "WDS", + "MONITOR", + "MESH_POINT", + "P2P_CLIENT", + "P2P_GO", + "P2P_DEVICE", }; /* size/addr for mwifiex_debug_info */ @@ -200,7 +207,12 @@ mwifiex_info_read(struct file *file, char __user *ubuf, p += sprintf(p, "driver_version = %s", fmt); p += sprintf(p, "\nverext = %s", priv->version_str); p += sprintf(p, "\ninterface_name=\"%s\"\n", netdev->name); - p += sprintf(p, "bss_mode=\"%s\"\n", bss_modes[info.bss_mode]); + + if (info.bss_mode >= ARRAY_SIZE(bss_modes)) + p += sprintf(p, "bss_mode=\"%d\"\n", info.bss_mode); + else + p += sprintf(p, "bss_mode=\"%s\"\n", bss_modes[info.bss_mode]); + p += sprintf(p, "media_state=\"%s\"\n", (!priv->media_connected ? "Disconnected" : "Connected")); p += sprintf(p, "mac_address=\"%pM\"\n", netdev->dev_addr); -- cgit v0.10.2 From 5b8df24e22e0b00b599cb9ae63dbb96e1959be30 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Thu, 30 May 2013 18:05:55 -0500 Subject: rtlwifi: rtl8192cu: Fix problem in connecting to WEP or WPA(1) networks Driver rtl8192cu can connect to WPA2 networks, but fails for any other encryption method. The cause is a failure to set the rate control data blocks. These changes fix https://bugzilla.redhat.com/show_bug.cgi?id=952793 and https://bugzilla.redhat.com/show_bug.cgi?id=761525. Signed-off-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c index 3d0498e..189ba12 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c @@ -1973,26 +1973,35 @@ void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) } } -void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw, - struct ieee80211_sta *sta, - u8 rssi_level) +static void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw, + struct ieee80211_sta *sta) { struct rtl_priv *rtlpriv = rtl_priv(hw); struct rtl_phy *rtlphy = &(rtlpriv->phy); struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); - u32 ratr_value = (u32) mac->basic_rates; - u8 *mcsrate = mac->mcs; + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + u32 ratr_value; u8 ratr_index = 0; u8 nmode = mac->ht_enable; - u8 mimo_ps = 1; - u16 shortgi_rate = 0; - u32 tmp_ratr_value = 0; + u8 mimo_ps = IEEE80211_SMPS_OFF; + u16 shortgi_rate; + u32 tmp_ratr_value; u8 curtxbw_40mhz = mac->bw_40; - u8 curshortgi_40mhz = mac->sgi_40; - u8 curshortgi_20mhz = mac->sgi_20; + u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? + 1 : 0; + u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? + 1 : 0; enum wireless_mode wirelessmode = mac->mode; - ratr_value |= ((*(u16 *) (mcsrate))) << 12; + if (rtlhal->current_bandtype == BAND_ON_5G) + ratr_value = sta->supp_rates[1] << 4; + else + ratr_value = sta->supp_rates[0]; + if (mac->opmode == NL80211_IFTYPE_ADHOC) + ratr_value = 0xfff; + + ratr_value |= (sta->ht_cap.mcs.rx_mask[1] << 20 | + sta->ht_cap.mcs.rx_mask[0] << 12); switch (wirelessmode) { case WIRELESS_MODE_B: if (ratr_value & 0x0000000c) @@ -2006,7 +2015,7 @@ void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw, case WIRELESS_MODE_N_24G: case WIRELESS_MODE_N_5G: nmode = 1; - if (mimo_ps == 0) { + if (mimo_ps == IEEE80211_SMPS_STATIC) { ratr_value &= 0x0007F005; } else { u32 ratr_mask; @@ -2016,8 +2025,7 @@ void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw, ratr_mask = 0x000ff005; else ratr_mask = 0x0f0ff005; - if (curtxbw_40mhz) - ratr_mask |= 0x00000010; + ratr_value &= ratr_mask; } break; @@ -2026,41 +2034,74 @@ void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw, ratr_value &= 0x000ff0ff; else ratr_value &= 0x0f0ff0ff; + break; } + ratr_value &= 0x0FFFFFFF; - if (nmode && ((curtxbw_40mhz && curshortgi_40mhz) || - (!curtxbw_40mhz && curshortgi_20mhz))) { + + if (nmode && ((curtxbw_40mhz && + curshortgi_40mhz) || (!curtxbw_40mhz && + curshortgi_20mhz))) { + ratr_value |= 0x10000000; tmp_ratr_value = (ratr_value >> 12); + for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) { if ((1 << shortgi_rate) & tmp_ratr_value) break; } + shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) | - (shortgi_rate << 4) | (shortgi_rate); + (shortgi_rate << 4) | (shortgi_rate); } + rtl_write_dword(rtlpriv, REG_ARFR0 + ratr_index * 4, ratr_value); + + RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, "%x\n", + rtl_read_dword(rtlpriv, REG_ARFR0)); } -void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level) +static void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, + u8 rssi_level) { struct rtl_priv *rtlpriv = rtl_priv(hw); struct rtl_phy *rtlphy = &(rtlpriv->phy); struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); - u32 ratr_bitmap = (u32) mac->basic_rates; - u8 *p_mcsrate = mac->mcs; - u8 ratr_index = 0; - u8 curtxbw_40mhz = mac->bw_40; - u8 curshortgi_40mhz = mac->sgi_40; - u8 curshortgi_20mhz = mac->sgi_20; - enum wireless_mode wirelessmode = mac->mode; + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct rtl_sta_info *sta_entry = NULL; + u32 ratr_bitmap; + u8 ratr_index; + u8 curtxbw_40mhz = (sta->bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0; + u8 curshortgi_40mhz = curtxbw_40mhz && + (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? + 1 : 0; + u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? + 1 : 0; + enum wireless_mode wirelessmode = 0; bool shortgi = false; u8 rate_mask[5]; u8 macid = 0; - u8 mimops = 1; - - ratr_bitmap |= (p_mcsrate[1] << 20) | (p_mcsrate[0] << 12); + u8 mimo_ps = IEEE80211_SMPS_OFF; + + sta_entry = (struct rtl_sta_info *) sta->drv_priv; + wirelessmode = sta_entry->wireless_mode; + if (mac->opmode == NL80211_IFTYPE_STATION || + mac->opmode == NL80211_IFTYPE_MESH_POINT) + curtxbw_40mhz = mac->bw_40; + else if (mac->opmode == NL80211_IFTYPE_AP || + mac->opmode == NL80211_IFTYPE_ADHOC) + macid = sta->aid + 1; + + if (rtlhal->current_bandtype == BAND_ON_5G) + ratr_bitmap = sta->supp_rates[1] << 4; + else + ratr_bitmap = sta->supp_rates[0]; + if (mac->opmode == NL80211_IFTYPE_ADHOC) + ratr_bitmap = 0xfff; + ratr_bitmap |= (sta->ht_cap.mcs.rx_mask[1] << 20 | + sta->ht_cap.mcs.rx_mask[0] << 12); switch (wirelessmode) { case WIRELESS_MODE_B: ratr_index = RATR_INX_WIRELESS_B; @@ -2071,6 +2112,7 @@ void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level) break; case WIRELESS_MODE_G: ratr_index = RATR_INX_WIRELESS_GB; + if (rssi_level == 1) ratr_bitmap &= 0x00000f00; else if (rssi_level == 2) @@ -2085,7 +2127,8 @@ void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level) case WIRELESS_MODE_N_24G: case WIRELESS_MODE_N_5G: ratr_index = RATR_INX_WIRELESS_NGB; - if (mimops == 0) { + + if (mimo_ps == IEEE80211_SMPS_STATIC) { if (rssi_level == 1) ratr_bitmap &= 0x00070000; else if (rssi_level == 2) @@ -2128,8 +2171,10 @@ void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level) } } } + if ((curtxbw_40mhz && curshortgi_40mhz) || (!curtxbw_40mhz && curshortgi_20mhz)) { + if (macid == 0) shortgi = true; else if (macid == 1) @@ -2138,21 +2183,42 @@ void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level) break; default: ratr_index = RATR_INX_WIRELESS_NGB; + if (rtlphy->rf_type == RF_1T2R) ratr_bitmap &= 0x000ff0ff; else ratr_bitmap &= 0x0f0ff0ff; break; } - RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, "ratr_bitmap :%x\n", - ratr_bitmap); - *(u32 *)&rate_mask = ((ratr_bitmap & 0x0fffffff) | - ratr_index << 28); + sta_entry->ratr_index = ratr_index; + + RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, + "ratr_bitmap :%x\n", ratr_bitmap); + *(u32 *)&rate_mask = (ratr_bitmap & 0x0fffffff) | + (ratr_index << 28); rate_mask[4] = macid | (shortgi ? 0x20 : 0x00) | 0x80; RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, "Rate_index:%x, ratr_val:%x, %5phC\n", ratr_index, ratr_bitmap, rate_mask); - rtl92c_fill_h2c_cmd(hw, H2C_RA_MASK, 5, rate_mask); + memcpy(rtlpriv->rate_mask, rate_mask, 5); + /* rtl92c_fill_h2c_cmd() does USB I/O and will result in a + * "scheduled while atomic" if called directly */ + schedule_work(&rtlpriv->works.fill_h2c_cmd); + + if (macid != 0) + sta_entry->ratr_index = ratr_index; +} + +void rtl92cu_update_hal_rate_tbl(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, + u8 rssi_level) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + + if (rtlpriv->dm.useramask) + rtl92cu_update_hal_rate_mask(hw, sta, rssi_level); + else + rtl92cu_update_hal_rate_table(hw, sta); } void rtl92cu_update_channel_access_setting(struct ieee80211_hw *hw) diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h index f41a3aa..8e3ec1e 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h @@ -98,10 +98,6 @@ void rtl92cu_update_interrupt_mask(struct ieee80211_hw *hw, u32 add_msr, u32 rm_msr); void rtl92cu_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val); void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val); -void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw, - struct ieee80211_sta *sta, - u8 rssi_level); -void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level); void rtl92cu_update_channel_access_setting(struct ieee80211_hw *hw); bool rtl92cu_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 * valid); diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c b/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c index 85b6bdb..da4f587 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c @@ -289,14 +289,30 @@ void rtl92c_set_key(struct ieee80211_hw *hw, u32 key_index, macaddr = cam_const_broad; entry_id = key_index; } else { + if (mac->opmode == NL80211_IFTYPE_AP || + mac->opmode == NL80211_IFTYPE_MESH_POINT) { + entry_id = rtl_cam_get_free_entry(hw, + p_macaddr); + if (entry_id >= TOTAL_CAM_ENTRY) { + RT_TRACE(rtlpriv, COMP_SEC, + DBG_EMERG, + "Can not find free hw security cam entry\n"); + return; + } + } else { + entry_id = CAM_PAIRWISE_KEY_POSITION; + } + key_index = PAIRWISE_KEYIDX; - entry_id = CAM_PAIRWISE_KEY_POSITION; is_pairwise = true; } } if (rtlpriv->sec.key_len[key_index] == 0) { RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "delete one entry\n"); + if (mac->opmode == NL80211_IFTYPE_AP || + mac->opmode == NL80211_IFTYPE_MESH_POINT) + rtl_cam_del_entry(hw, p_macaddr); rtl_cam_delete_one_entry(hw, p_macaddr, entry_id); } else { RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c index 938b1e6..826f085 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c @@ -106,8 +106,7 @@ static struct rtl_hal_ops rtl8192cu_hal_ops = { .update_interrupt_mask = rtl92cu_update_interrupt_mask, .get_hw_reg = rtl92cu_get_hw_reg, .set_hw_reg = rtl92cu_set_hw_reg, - .update_rate_tbl = rtl92cu_update_hal_rate_table, - .update_rate_mask = rtl92cu_update_hal_rate_mask, + .update_rate_tbl = rtl92cu_update_hal_rate_tbl, .fill_tx_desc = rtl92cu_tx_fill_desc, .fill_fake_txdesc = rtl92cu_fill_fake_txdesc, .fill_tx_cmddesc = rtl92cu_tx_fill_cmddesc, @@ -137,6 +136,7 @@ static struct rtl_hal_ops rtl8192cu_hal_ops = { .phy_lc_calibrate = _rtl92cu_phy_lc_calibrate, .phy_set_bw_mode_callback = rtl92cu_phy_set_bw_mode_callback, .dm_dynamic_txpower = rtl92cu_dm_dynamic_txpower, + .fill_h2c_cmd = rtl92c_fill_h2c_cmd, }; static struct rtl_mod_params rtl92cu_mod_params = { diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.h b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.h index a1310ab..262e1e4 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.h +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.h @@ -49,5 +49,8 @@ bool rtl92cu_phy_set_rf_power_state(struct ieee80211_hw *hw, u32 rtl92cu_phy_query_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath, u32 regaddr, u32 bitmask); void rtl92cu_phy_set_bw_mode_callback(struct ieee80211_hw *hw); +void rtl92cu_update_hal_rate_tbl(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, + u8 rssi_level); #endif diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c index 76732b0..a3532e0 100644 --- a/drivers/net/wireless/rtlwifi/usb.c +++ b/drivers/net/wireless/rtlwifi/usb.c @@ -824,6 +824,7 @@ static void rtl_usb_stop(struct ieee80211_hw *hw) /* should after adapter start and interrupt enable. */ set_hal_stop(rtlhal); + cancel_work_sync(&rtlpriv->works.fill_h2c_cmd); /* Enable software */ SET_USB_STOP(rtlusb); rtl_usb_deinit(hw); @@ -1026,6 +1027,16 @@ static bool rtl_usb_tx_chk_waitq_insert(struct ieee80211_hw *hw, return false; } +static void rtl_fill_h2c_cmd_work_callback(struct work_struct *work) +{ + struct rtl_works *rtlworks = + container_of(work, struct rtl_works, fill_h2c_cmd); + struct ieee80211_hw *hw = rtlworks->hw; + struct rtl_priv *rtlpriv = rtl_priv(hw); + + rtlpriv->cfg->ops->fill_h2c_cmd(hw, H2C_RA_MASK, 5, rtlpriv->rate_mask); +} + static struct rtl_intf_ops rtl_usb_ops = { .adapter_start = rtl_usb_start, .adapter_stop = rtl_usb_stop, @@ -1057,6 +1068,8 @@ int rtl_usb_probe(struct usb_interface *intf, /* this spin lock must be initialized early */ spin_lock_init(&rtlpriv->locks.usb_lock); + INIT_WORK(&rtlpriv->works.fill_h2c_cmd, + rtl_fill_h2c_cmd_work_callback); rtlpriv->usb_data_index = 0; init_completion(&rtlpriv->firmware_loading_complete); diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h index 44328ba..cc03e7c 100644 --- a/drivers/net/wireless/rtlwifi/wifi.h +++ b/drivers/net/wireless/rtlwifi/wifi.h @@ -1736,6 +1736,8 @@ struct rtl_hal_ops { void (*bt_wifi_media_status_notify) (struct ieee80211_hw *hw, bool mstate); void (*bt_coex_off_before_lps) (struct ieee80211_hw *hw); + void (*fill_h2c_cmd) (struct ieee80211_hw *hw, u8 element_id, + u32 cmd_len, u8 *p_cmdbuffer); }; struct rtl_intf_ops { @@ -1869,6 +1871,7 @@ struct rtl_works { struct delayed_work fwevt_wq; struct work_struct lps_change_work; + struct work_struct fill_h2c_cmd; }; struct rtl_debug { @@ -2048,6 +2051,7 @@ struct rtl_priv { }; }; bool enter_ps; /* true when entering PS */ + u8 rate_mask[5]; /*This must be the last item so that it points to the data allocated -- cgit v0.10.2 From 60c28cf18f970e1c1bd40d615596eeab6efbd9d7 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Fri, 10 May 2013 10:19:38 +0300 Subject: wl12xx: fix minimum required firmware version for wl127x multirole There was a typo in commit 8675f9 (wlcore/wl12xx/wl18xx: verify multi-role and single-role fw versions), which was causing the multirole firmware for wl127x (WiLink6) to be rejected. The actual minimum version needed for wl127x multirole is 6.5.7.0.42. Reported-by: Levi Pearson Reported-by: Michael Scott Cc: stable@kernel.org # 3.9+ Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ti/wl12xx/wl12xx.h b/drivers/net/wireless/ti/wl12xx/wl12xx.h index 222d035..139da4d 100644 --- a/drivers/net/wireless/ti/wl12xx/wl12xx.h +++ b/drivers/net/wireless/ti/wl12xx/wl12xx.h @@ -41,7 +41,7 @@ #define WL127X_IFTYPE_MR_VER 5 #define WL127X_MAJOR_MR_VER 7 #define WL127X_SUBTYPE_MR_VER WLCORE_FW_VER_IGNORE -#define WL127X_MINOR_MR_VER 115 +#define WL127X_MINOR_MR_VER 42 /* FW chip version for wl128x */ #define WL128X_CHIP_VER 7 -- cgit v0.10.2 From 0e284c074ef96554f2988298da7d110b0e8d1e23 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Fri, 10 May 2013 10:44:25 +0300 Subject: wl12xx: increase minimum singlerole firmware version required The minimum firmware version required for singlerole after recent driver changes is 6/7.3.10.0.133. Reported-by: Tony Lindgren Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ti/wl12xx/wl12xx.h b/drivers/net/wireless/ti/wl12xx/wl12xx.h index 139da4d..9e5484a 100644 --- a/drivers/net/wireless/ti/wl12xx/wl12xx.h +++ b/drivers/net/wireless/ti/wl12xx/wl12xx.h @@ -36,7 +36,7 @@ #define WL127X_IFTYPE_SR_VER 3 #define WL127X_MAJOR_SR_VER 10 #define WL127X_SUBTYPE_SR_VER WLCORE_FW_VER_IGNORE -#define WL127X_MINOR_SR_VER 115 +#define WL127X_MINOR_SR_VER 133 /* minimum multi-role FW version for wl127x */ #define WL127X_IFTYPE_MR_VER 5 #define WL127X_MAJOR_MR_VER 7 @@ -49,7 +49,7 @@ #define WL128X_IFTYPE_SR_VER 3 #define WL128X_MAJOR_SR_VER 10 #define WL128X_SUBTYPE_SR_VER WLCORE_FW_VER_IGNORE -#define WL128X_MINOR_SR_VER 115 +#define WL128X_MINOR_SR_VER 133 /* minimum multi-role FW version for wl128x */ #define WL128X_IFTYPE_MR_VER 5 #define WL128X_MAJOR_MR_VER 7 -- cgit v0.10.2 From a805de4d036152a4ad7d3b18a9993a5c86588d6d Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 7 May 2013 15:41:09 +0300 Subject: wl12xx/wl18xx: scan all 5ghz channels Due to a typo, the current code copies only sizeof(cmd->channels_2) bytes, which is smaller than the correct sizeof(cmd->channels_5) size, resulting in a partial scan (some channels are skipped). Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ti/wl12xx/scan.c b/drivers/net/wireless/ti/wl12xx/scan.c index affdb3e..4a0bbb1 100644 --- a/drivers/net/wireless/ti/wl12xx/scan.c +++ b/drivers/net/wireless/ti/wl12xx/scan.c @@ -310,7 +310,7 @@ static void wl12xx_adjust_channels(struct wl1271_cmd_sched_scan_config *cmd, memcpy(cmd->channels_2, cmd_channels->channels_2, sizeof(cmd->channels_2)); memcpy(cmd->channels_5, cmd_channels->channels_5, - sizeof(cmd->channels_2)); + sizeof(cmd->channels_5)); /* channels_4 are not supported, so no need to copy them */ } diff --git a/drivers/net/wireless/ti/wl18xx/scan.c b/drivers/net/wireless/ti/wl18xx/scan.c index 09d9445..2b642f8 100644 --- a/drivers/net/wireless/ti/wl18xx/scan.c +++ b/drivers/net/wireless/ti/wl18xx/scan.c @@ -34,7 +34,7 @@ static void wl18xx_adjust_channels(struct wl18xx_cmd_scan_params *cmd, memcpy(cmd->channels_2, cmd_channels->channels_2, sizeof(cmd->channels_2)); memcpy(cmd->channels_5, cmd_channels->channels_5, - sizeof(cmd->channels_2)); + sizeof(cmd->channels_5)); /* channels_4 are not supported, so no need to copy them */ } -- cgit v0.10.2 From 87ccee46fabd235c2bac3652dee009e8f791dc10 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Thu, 30 May 2013 16:21:47 -0500 Subject: rtlwifi: Fix a false leak indication for PCI devices This false leak indication is avoided with a no-leak annotation to kmemleak. Signed-off-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index 999ffc1..c97e9d3 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -764,6 +764,7 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw) "can't alloc skb for rx\n"); goto done; } + kmemleak_not_leak(new_skb); pci_unmap_single(rtlpci->pdev, *((dma_addr_t *) skb->cb), -- cgit v0.10.2 From 71aa5bba83f81722e7f6bfaeda16b983ba8a0cc2 Mon Sep 17 00:00:00 2001 From: Yijing Wang Date: Fri, 31 May 2013 14:05:32 +0800 Subject: net: wireless: iwlegacy: fix build error for il_pm_ops Fix build error for il_pm_ops if CONFIG_PM is set but CONFIG_PM_SLEEP is not set. ERROR: "il_pm_ops" [drivers/net/wireless/iwlegacy/iwl4965.ko] undefined! ERROR: "il_pm_ops" [drivers/net/wireless/iwlegacy/iwl3945.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Signed-off-by: Yijing Wang Cc: Stanislaw Gruszka Cc: "John W. Linville" Cc: netdev@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: Jingoo Han Acked-by: Jingoo Han Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlegacy/common.h b/drivers/net/wireless/iwlegacy/common.h index f8246f2..4caaf52 100644 --- a/drivers/net/wireless/iwlegacy/common.h +++ b/drivers/net/wireless/iwlegacy/common.h @@ -1832,16 +1832,16 @@ u32 il_usecs_to_beacons(struct il_priv *il, u32 usec, u32 beacon_interval); __le32 il_add_beacon_time(struct il_priv *il, u32 base, u32 addon, u32 beacon_interval); -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP extern const struct dev_pm_ops il_pm_ops; #define IL_LEGACY_PM_OPS (&il_pm_ops) -#else /* !CONFIG_PM */ +#else /* !CONFIG_PM_SLEEP */ #define IL_LEGACY_PM_OPS NULL -#endif /* !CONFIG_PM */ +#endif /* !CONFIG_PM_SLEEP */ /***************************************************** * Error Handling Debugging -- cgit v0.10.2 From 531671cb17af07281e6f28c1425f754346e65c41 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Sat, 1 Jun 2013 07:08:09 +0530 Subject: ath9k: Disable PowerSave by default Almost all the DMA issues which have plagued ath9k (in station mode) for years are related to PS. Disabling PS usually "fixes" the user's connection stablility. Reports of DMA problems are still trickling in and are sitting in the kernel bugzilla. Until the PS code in ath9k is given a thorough review, disbale it by default. The slight increase in chip power consumption is a small price to pay for improved link stability. Cc: stable@vger.kernel.org Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index aba4151..47d3269 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -787,8 +787,7 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw) hw->wiphy->iface_combinations = if_comb; hw->wiphy->n_iface_combinations = ARRAY_SIZE(if_comb); - if (AR_SREV_5416(sc->sc_ah)) - hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; + hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS; -- cgit v0.10.2 From 96005931785238e1a24febf65ffb5016273e8225 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 3 Jun 2013 11:18:57 +0200 Subject: Revert "ath9k_hw: Update rx gain initval to improve rx sensitivity" This reverts commit 68d9e1fa24d9c7c2e527f49df8d18fb8cf0ec943 This change reduces rx sensitivity with no apparent extra benefit. It looks like it was meant for testing in a specific scenario, but it was never properly validated. Cc: rmanohar@qca.qualcomm.com Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h index db5ffad..7546b9a 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h @@ -958,11 +958,11 @@ static const u32 ar9300Common_rx_gain_table_2p2[][2] = { {0x0000a074, 0x00000000}, {0x0000a078, 0x00000000}, {0x0000a07c, 0x00000000}, - {0x0000a080, 0x1a1a1a1a}, - {0x0000a084, 0x1a1a1a1a}, - {0x0000a088, 0x1a1a1a1a}, - {0x0000a08c, 0x1a1a1a1a}, - {0x0000a090, 0x171a1a1a}, + {0x0000a080, 0x22222229}, + {0x0000a084, 0x1d1d1d1d}, + {0x0000a088, 0x1d1d1d1d}, + {0x0000a08c, 0x1d1d1d1d}, + {0x0000a090, 0x171d1d1d}, {0x0000a094, 0x11111717}, {0x0000a098, 0x00030311}, {0x0000a09c, 0x00000000}, -- cgit v0.10.2 From 5efac94999ff218e0101f67a059e44abb4b0b523 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Thu, 6 Jun 2013 10:06:29 +0530 Subject: ath9k: Use minstrel rate control by default The ath9k rate control algorithm has various architectural issues that make it a poor fit in scenarios like congested environments etc. An example: https://bugzilla.redhat.com/show_bug.cgi?id=927191 Change the default to minstrel which is more robust in such cases. The ath9k RC code is left in the driver for now, maybe it can be removed altogether later on. Cc: stable@vger.kernel.org Cc: Jouni Malinen Cc: Linus Torvalds Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig index f3dc124..3c2cbc9 100644 --- a/drivers/net/wireless/ath/ath9k/Kconfig +++ b/drivers/net/wireless/ath/ath9k/Kconfig @@ -92,13 +92,17 @@ config ATH9K_MAC_DEBUG This option enables collection of statistics for Rx/Tx status data and some other MAC related statistics -config ATH9K_RATE_CONTROL +config ATH9K_LEGACY_RATE_CONTROL bool "Atheros ath9k rate control" depends on ATH9K - default y + default n ---help--- Say Y, if you want to use the ath9k specific rate control - module instead of minstrel_ht. + module instead of minstrel_ht. Be warned that there are various + issues with the ath9k RC and minstrel is a more robust algorithm. + Note that even if this option is selected, "ath9k_rate_control" + has to be passed to mac80211 using the module parameter, + ieee80211_default_rc_algo. config ATH9K_HTC tristate "Atheros HTC based wireless cards support" diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile index 2ad8f94..75ee9e7 100644 --- a/drivers/net/wireless/ath/ath9k/Makefile +++ b/drivers/net/wireless/ath/ath9k/Makefile @@ -8,7 +8,7 @@ ath9k-y += beacon.o \ antenna.o ath9k-$(CONFIG_ATH9K_BTCOEX_SUPPORT) += mci.o -ath9k-$(CONFIG_ATH9K_RATE_CONTROL) += rc.o +ath9k-$(CONFIG_ATH9K_LEGACY_RATE_CONTROL) += rc.o ath9k-$(CONFIG_ATH9K_PCI) += pci.o ath9k-$(CONFIG_ATH9K_AHB) += ahb.o ath9k-$(CONFIG_ATH9K_DEBUGFS) += debug.o diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 47d3269..2ba4945 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -829,10 +829,6 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw) sc->ant_rx = hw->wiphy->available_antennas_rx; sc->ant_tx = hw->wiphy->available_antennas_tx; -#ifdef CONFIG_ATH9K_RATE_CONTROL - hw->rate_control_algorithm = "ath9k_rate_control"; -#endif - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ) hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &sc->sbands[IEEE80211_BAND_2GHZ]; diff --git a/drivers/net/wireless/ath/ath9k/rc.h b/drivers/net/wireless/ath/ath9k/rc.h index 267dbfc..b9a8738 100644 --- a/drivers/net/wireless/ath/ath9k/rc.h +++ b/drivers/net/wireless/ath/ath9k/rc.h @@ -231,7 +231,7 @@ static inline void ath_debug_stat_retries(struct ath_rate_priv *rc, int rix, } #endif -#ifdef CONFIG_ATH9K_RATE_CONTROL +#ifdef CONFIG_ATH9K_LEGACY_RATE_CONTROL int ath_rate_control_register(void); void ath_rate_control_unregister(void); #else -- cgit v0.10.2 From e0e29b683d6784ef59bbc914eac85a04b650e63c Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Fri, 10 May 2013 14:48:21 -0700 Subject: b43: stop format string leaking into error msgs The module parameter "fwpostfix" is userspace controllable, unfiltered, and is used to define the firmware filename. b43_do_request_fw() populates ctx->errors[] on error, containing the firmware filename. b43err() parses its arguments as a format string. For systems with b43 hardware, this could lead to a uid-0 to ring-0 escalation. CVE-2013-2852 Signed-off-by: Kees Cook Cc: stable@vger.kernel.org Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 6dd07e2..a95b77a 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -2458,7 +2458,7 @@ static void b43_request_firmware(struct work_struct *work) for (i = 0; i < B43_NR_FWTYPES; i++) { errmsg = ctx->errors[i]; if (strlen(errmsg)) - b43err(dev->wl, errmsg); + b43err(dev->wl, "%s", errmsg); } b43_print_fw_helptext(dev->wl, 1); goto out; -- cgit v0.10.2 From b1983b0a7578de09211a696802edab83fd253303 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Tue, 11 Jun 2013 11:56:52 -0700 Subject: x86, relocs: Move __vvar_page from S_ABS to S_REL The __vvar_page relocation should actually be listed in S_REL instead of S_ABS. Oddly, this didn't always cause things to break, presumably because there are no users for relocation information on 64 bits yet. [ hpa: Not for stable - new code in 3.10 ] Signed-off-by: Kees Cook Link: http://lkml.kernel.org/r/20130611185652.GA23674@www.outflux.net Reported-by: Michael Davidson Signed-off-by: H. Peter Anvin diff --git a/arch/x86/tools/relocs.c b/arch/x86/tools/relocs.c index 590be10..f7bab68 100644 --- a/arch/x86/tools/relocs.c +++ b/arch/x86/tools/relocs.c @@ -42,9 +42,6 @@ static const char * const sym_regex_kernel[S_NSYMTYPES] = { "^(xen_irq_disable_direct_reloc$|" "xen_save_fl_direct_reloc$|" "VDSO|" -#if ELF_BITS == 64 - "__vvar_page|" -#endif "__crc_)", /* @@ -72,6 +69,7 @@ static const char * const sym_regex_kernel[S_NSYMTYPES] = { "__per_cpu_load|" "init_per_cpu__.*|" "__end_rodata_hpage_align|" + "__vvar_page|" #endif "_end)$" }; -- cgit v0.10.2 From c8a22d19dd238ede87aa0ac4f7dbea8da039b9c1 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Wed, 5 Jun 2013 11:47:18 -0700 Subject: x86: Fix typo in kexec register clearing Fixes a typo in register clearing code. Thanks to PaX Team for fixing this originally, and James Troup for pointing it out. Signed-off-by: Kees Cook Link: http://lkml.kernel.org/r/20130605184718.GA8396@www.outflux.net Cc: v2.6.30+ Cc: PaX Team Signed-off-by: H. Peter Anvin diff --git a/arch/x86/kernel/relocate_kernel_64.S b/arch/x86/kernel/relocate_kernel_64.S index 7a6f3b3..f2bb9c9 100644 --- a/arch/x86/kernel/relocate_kernel_64.S +++ b/arch/x86/kernel/relocate_kernel_64.S @@ -160,7 +160,7 @@ identity_mapped: xorq %rbp, %rbp xorq %r8, %r8 xorq %r9, %r9 - xorq %r10, %r9 + xorq %r10, %r10 xorq %r11, %r11 xorq %r12, %r12 xorq %r13, %r13 -- cgit v0.10.2 From 16e53dbf10a2d7e228709a7286310e629ede5e45 Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Wed, 12 Jun 2013 14:04:36 -0700 Subject: CPU hotplug: provide a generic helper to disable/enable CPU hotplug There are instances in the kernel where we would like to disable CPU hotplug (from sysfs) during some important operation. Today the freezer code depends on this and the code to do it was kinda tailor-made for that. Restructure the code and make it generic enough to be useful for other usecases too. Signed-off-by: Srivatsa S. Bhat Signed-off-by: Robin Holt Cc: H. Peter Anvin Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Russ Anderson Cc: Robin Holt Cc: Russell King Cc: Guan Xuetao Cc: Shawn Guo Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/cpu.h b/include/linux/cpu.h index c6f6e08..9f3c7e8 100644 --- a/include/linux/cpu.h +++ b/include/linux/cpu.h @@ -175,6 +175,8 @@ extern struct bus_type cpu_subsys; extern void get_online_cpus(void); extern void put_online_cpus(void); +extern void cpu_hotplug_disable(void); +extern void cpu_hotplug_enable(void); #define hotcpu_notifier(fn, pri) cpu_notifier(fn, pri) #define register_hotcpu_notifier(nb) register_cpu_notifier(nb) #define unregister_hotcpu_notifier(nb) unregister_cpu_notifier(nb) @@ -198,6 +200,8 @@ static inline void cpu_hotplug_driver_unlock(void) #define get_online_cpus() do { } while (0) #define put_online_cpus() do { } while (0) +#define cpu_hotplug_disable() do { } while (0) +#define cpu_hotplug_enable() do { } while (0) #define hotcpu_notifier(fn, pri) do { (void)(fn); } while (0) /* These aren't inline functions due to a GCC bug. */ #define register_hotcpu_notifier(nb) ({ (void)(nb); 0; }) diff --git a/kernel/cpu.c b/kernel/cpu.c index b5e4ab2..198a388 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -133,6 +133,27 @@ static void cpu_hotplug_done(void) mutex_unlock(&cpu_hotplug.lock); } +/* + * Wait for currently running CPU hotplug operations to complete (if any) and + * disable future CPU hotplug (from sysfs). The 'cpu_add_remove_lock' protects + * the 'cpu_hotplug_disabled' flag. The same lock is also acquired by the + * hotplug path before performing hotplug operations. So acquiring that lock + * guarantees mutual exclusion from any currently running hotplug operations. + */ +void cpu_hotplug_disable(void) +{ + cpu_maps_update_begin(); + cpu_hotplug_disabled = 1; + cpu_maps_update_done(); +} + +void cpu_hotplug_enable(void) +{ + cpu_maps_update_begin(); + cpu_hotplug_disabled = 0; + cpu_maps_update_done(); +} + #else /* #if CONFIG_HOTPLUG_CPU */ static void cpu_hotplug_begin(void) {} static void cpu_hotplug_done(void) {} @@ -541,36 +562,6 @@ static int __init alloc_frozen_cpus(void) core_initcall(alloc_frozen_cpus); /* - * Prevent regular CPU hotplug from racing with the freezer, by disabling CPU - * hotplug when tasks are about to be frozen. Also, don't allow the freezer - * to continue until any currently running CPU hotplug operation gets - * completed. - * To modify the 'cpu_hotplug_disabled' flag, we need to acquire the - * 'cpu_add_remove_lock'. And this same lock is also taken by the regular - * CPU hotplug path and released only after it is complete. Thus, we - * (and hence the freezer) will block here until any currently running CPU - * hotplug operation gets completed. - */ -void cpu_hotplug_disable_before_freeze(void) -{ - cpu_maps_update_begin(); - cpu_hotplug_disabled = 1; - cpu_maps_update_done(); -} - - -/* - * When tasks have been thawed, re-enable regular CPU hotplug (which had been - * disabled while beginning to freeze tasks). - */ -void cpu_hotplug_enable_after_thaw(void) -{ - cpu_maps_update_begin(); - cpu_hotplug_disabled = 0; - cpu_maps_update_done(); -} - -/* * When callbacks for CPU hotplug notifications are being executed, we must * ensure that the state of the system with respect to the tasks being frozen * or not, as reported by the notification, remains unchanged *throughout the @@ -589,12 +580,12 @@ cpu_hotplug_pm_callback(struct notifier_block *nb, case PM_SUSPEND_PREPARE: case PM_HIBERNATION_PREPARE: - cpu_hotplug_disable_before_freeze(); + cpu_hotplug_disable(); break; case PM_POST_SUSPEND: case PM_POST_HIBERNATION: - cpu_hotplug_enable_after_thaw(); + cpu_hotplug_enable(); break; default: -- cgit v0.10.2 From cf7df378aa4ff7da3a44769b7ff6e9eef1a9f3db Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Wed, 12 Jun 2013 14:04:37 -0700 Subject: reboot: rigrate shutdown/reboot to boot cpu We recently noticed that reboot of a 1024 cpu machine takes approx 16 minutes of just stopping the cpus. The slowdown was tracked to commit f96972f2dc63 ("kernel/sys.c: call disable_nonboot_cpus() in kernel_restart()"). The current implementation does all the work of hot removing the cpus before halting the system. We are switching to just migrating to the boot cpu and then continuing with shutdown/reboot. This also has the effect of not breaking x86's command line parameter for specifying the reboot cpu. Note, this code was shamelessly copied from arch/x86/kernel/reboot.c with bits removed pertaining to the reboot_cpu command line parameter. Signed-off-by: Robin Holt Tested-by: Shawn Guo Cc: "Srivatsa S. Bhat" Cc: H. Peter Anvin Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Russ Anderson Cc: Robin Holt Cc: Russell King Cc: Guan Xuetao Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/sys.c b/kernel/sys.c index b95d3c7..2bbd9a7 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -362,6 +362,29 @@ int unregister_reboot_notifier(struct notifier_block *nb) } EXPORT_SYMBOL(unregister_reboot_notifier); +/* Add backwards compatibility for stable trees. */ +#ifndef PF_NO_SETAFFINITY +#define PF_NO_SETAFFINITY PF_THREAD_BOUND +#endif + +static void migrate_to_reboot_cpu(void) +{ + /* The boot cpu is always logical cpu 0 */ + int cpu = 0; + + cpu_hotplug_disable(); + + /* Make certain the cpu I'm about to reboot on is online */ + if (!cpu_online(cpu)) + cpu = cpumask_first(cpu_online_mask); + + /* Prevent races with other tasks migrating this task */ + current->flags |= PF_NO_SETAFFINITY; + + /* Make certain I only run on the appropriate processor */ + set_cpus_allowed_ptr(current, cpumask_of(cpu)); +} + /** * kernel_restart - reboot the system * @cmd: pointer to buffer containing command to execute for restart @@ -373,7 +396,7 @@ EXPORT_SYMBOL(unregister_reboot_notifier); void kernel_restart(char *cmd) { kernel_restart_prepare(cmd); - disable_nonboot_cpus(); + migrate_to_reboot_cpu(); syscore_shutdown(); if (!cmd) printk(KERN_EMERG "Restarting system.\n"); @@ -400,7 +423,7 @@ static void kernel_shutdown_prepare(enum system_states state) void kernel_halt(void) { kernel_shutdown_prepare(SYSTEM_HALT); - disable_nonboot_cpus(); + migrate_to_reboot_cpu(); syscore_shutdown(); printk(KERN_EMERG "System halted.\n"); kmsg_dump(KMSG_DUMP_HALT); @@ -419,7 +442,7 @@ void kernel_power_off(void) kernel_shutdown_prepare(SYSTEM_POWER_OFF); if (pm_power_off_prepare) pm_power_off_prepare(); - disable_nonboot_cpus(); + migrate_to_reboot_cpu(); syscore_shutdown(); printk(KERN_EMERG "Power down.\n"); kmsg_dump(KMSG_DUMP_POWEROFF); -- cgit v0.10.2 From 637241a900cbd982f744d44646b48a273d609b34 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Wed, 12 Jun 2013 14:04:39 -0700 Subject: kmsg: honor dmesg_restrict sysctl on /dev/kmsg The dmesg_restrict sysctl currently covers the syslog method for access dmesg, however /dev/kmsg isn't covered by the same protections. Most people haven't noticed because util-linux dmesg(1) defaults to using the syslog method for access in older versions. With util-linux dmesg(1) defaults to reading directly from /dev/kmsg. To fix /dev/kmsg, let's compare the existing interfaces and what they allow: - /proc/kmsg allows: - open (SYSLOG_ACTION_OPEN) if CAP_SYSLOG since it uses a destructive single-reader interface (SYSLOG_ACTION_READ). - everything, after an open. - syslog syscall allows: - anything, if CAP_SYSLOG. - SYSLOG_ACTION_READ_ALL and SYSLOG_ACTION_SIZE_BUFFER, if dmesg_restrict==0. - nothing else (EPERM). The use-cases were: - dmesg(1) needs to do non-destructive SYSLOG_ACTION_READ_ALLs. - sysklog(1) needs to open /proc/kmsg, drop privs, and still issue the destructive SYSLOG_ACTION_READs. AIUI, dmesg(1) is moving to /dev/kmsg, and systemd-journald doesn't clear the ring buffer. Based on the comments in devkmsg_llseek, it sounds like actions besides reading aren't going to be supported by /dev/kmsg (i.e. SYSLOG_ACTION_CLEAR), so we have a strict subset of the non-destructive syslog syscall actions. To this end, move the check as Josh had done, but also rename the constants to reflect their new uses (SYSLOG_FROM_CALL becomes SYSLOG_FROM_READER, and SYSLOG_FROM_FILE becomes SYSLOG_FROM_PROC). SYSLOG_FROM_READER allows non-destructive actions, and SYSLOG_FROM_PROC allows destructive actions after a capabilities-constrained SYSLOG_ACTION_OPEN check. - /dev/kmsg allows: - open if CAP_SYSLOG or dmesg_restrict==0 - reading/polling, after open Addresses https://bugzilla.redhat.com/show_bug.cgi?id=903192 [akpm@linux-foundation.org: use pr_warn_once()] Signed-off-by: Kees Cook Reported-by: Christian Kujau Tested-by: Josh Boyer Cc: Kay Sievers Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/proc/kmsg.c b/fs/proc/kmsg.c index bd4b5a7..bdfabda 100644 --- a/fs/proc/kmsg.c +++ b/fs/proc/kmsg.c @@ -21,12 +21,12 @@ extern wait_queue_head_t log_wait; static int kmsg_open(struct inode * inode, struct file * file) { - return do_syslog(SYSLOG_ACTION_OPEN, NULL, 0, SYSLOG_FROM_FILE); + return do_syslog(SYSLOG_ACTION_OPEN, NULL, 0, SYSLOG_FROM_PROC); } static int kmsg_release(struct inode * inode, struct file * file) { - (void) do_syslog(SYSLOG_ACTION_CLOSE, NULL, 0, SYSLOG_FROM_FILE); + (void) do_syslog(SYSLOG_ACTION_CLOSE, NULL, 0, SYSLOG_FROM_PROC); return 0; } @@ -34,15 +34,15 @@ static ssize_t kmsg_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { if ((file->f_flags & O_NONBLOCK) && - !do_syslog(SYSLOG_ACTION_SIZE_UNREAD, NULL, 0, SYSLOG_FROM_FILE)) + !do_syslog(SYSLOG_ACTION_SIZE_UNREAD, NULL, 0, SYSLOG_FROM_PROC)) return -EAGAIN; - return do_syslog(SYSLOG_ACTION_READ, buf, count, SYSLOG_FROM_FILE); + return do_syslog(SYSLOG_ACTION_READ, buf, count, SYSLOG_FROM_PROC); } static unsigned int kmsg_poll(struct file *file, poll_table *wait) { poll_wait(file, &log_wait, wait); - if (do_syslog(SYSLOG_ACTION_SIZE_UNREAD, NULL, 0, SYSLOG_FROM_FILE)) + if (do_syslog(SYSLOG_ACTION_SIZE_UNREAD, NULL, 0, SYSLOG_FROM_PROC)) return POLLIN | POLLRDNORM; return 0; } diff --git a/include/linux/syslog.h b/include/linux/syslog.h index 3891139..98a3153 100644 --- a/include/linux/syslog.h +++ b/include/linux/syslog.h @@ -44,8 +44,8 @@ /* Return size of the log buffer */ #define SYSLOG_ACTION_SIZE_BUFFER 10 -#define SYSLOG_FROM_CALL 0 -#define SYSLOG_FROM_FILE 1 +#define SYSLOG_FROM_READER 0 +#define SYSLOG_FROM_PROC 1 int do_syslog(int type, char __user *buf, int count, bool from_file); diff --git a/kernel/printk.c b/kernel/printk.c index fa36e14..8212c1a 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -363,6 +363,53 @@ static void log_store(int facility, int level, log_next_seq++; } +#ifdef CONFIG_SECURITY_DMESG_RESTRICT +int dmesg_restrict = 1; +#else +int dmesg_restrict; +#endif + +static int syslog_action_restricted(int type) +{ + if (dmesg_restrict) + return 1; + /* + * Unless restricted, we allow "read all" and "get buffer size" + * for everybody. + */ + return type != SYSLOG_ACTION_READ_ALL && + type != SYSLOG_ACTION_SIZE_BUFFER; +} + +static int check_syslog_permissions(int type, bool from_file) +{ + /* + * If this is from /proc/kmsg and we've already opened it, then we've + * already done the capabilities checks at open time. + */ + if (from_file && type != SYSLOG_ACTION_OPEN) + return 0; + + if (syslog_action_restricted(type)) { + if (capable(CAP_SYSLOG)) + return 0; + /* + * For historical reasons, accept CAP_SYS_ADMIN too, with + * a warning. + */ + if (capable(CAP_SYS_ADMIN)) { + pr_warn_once("%s (%d): Attempt to access syslog with " + "CAP_SYS_ADMIN but no CAP_SYSLOG " + "(deprecated).\n", + current->comm, task_pid_nr(current)); + return 0; + } + return -EPERM; + } + return security_syslog(type); +} + + /* /dev/kmsg - userspace message inject/listen interface */ struct devkmsg_user { u64 seq; @@ -620,7 +667,8 @@ static int devkmsg_open(struct inode *inode, struct file *file) if ((file->f_flags & O_ACCMODE) == O_WRONLY) return 0; - err = security_syslog(SYSLOG_ACTION_READ_ALL); + err = check_syslog_permissions(SYSLOG_ACTION_READ_ALL, + SYSLOG_FROM_READER); if (err) return err; @@ -813,45 +861,6 @@ static inline void boot_delay_msec(int level) } #endif -#ifdef CONFIG_SECURITY_DMESG_RESTRICT -int dmesg_restrict = 1; -#else -int dmesg_restrict; -#endif - -static int syslog_action_restricted(int type) -{ - if (dmesg_restrict) - return 1; - /* Unless restricted, we allow "read all" and "get buffer size" for everybody */ - return type != SYSLOG_ACTION_READ_ALL && type != SYSLOG_ACTION_SIZE_BUFFER; -} - -static int check_syslog_permissions(int type, bool from_file) -{ - /* - * If this is from /proc/kmsg and we've already opened it, then we've - * already done the capabilities checks at open time. - */ - if (from_file && type != SYSLOG_ACTION_OPEN) - return 0; - - if (syslog_action_restricted(type)) { - if (capable(CAP_SYSLOG)) - return 0; - /* For historical reasons, accept CAP_SYS_ADMIN too, with a warning */ - if (capable(CAP_SYS_ADMIN)) { - printk_once(KERN_WARNING "%s (%d): " - "Attempt to access syslog with CAP_SYS_ADMIN " - "but no CAP_SYSLOG (deprecated).\n", - current->comm, task_pid_nr(current)); - return 0; - } - return -EPERM; - } - return 0; -} - #if defined(CONFIG_PRINTK_TIME) static bool printk_time = 1; #else @@ -1249,7 +1258,7 @@ out: SYSCALL_DEFINE3(syslog, int, type, char __user *, buf, int, len) { - return do_syslog(type, buf, len, SYSLOG_FROM_CALL); + return do_syslog(type, buf, len, SYSLOG_FROM_READER); } /* -- cgit v0.10.2 From 5402b8047b0d286b6501f9097891cbf1e06daa3a Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Wed, 12 Jun 2013 14:04:40 -0700 Subject: lib/mpi/mpicoder.c: looping issue, need stop when equal to zero, found by 'EXTRA_FLAGS=-W'. For 'while' looping, need stop when 'nbytes == 0', or will cause issue. ('nbytes' is size_t which is always bigger or equal than zero). The related warning: (with EXTRA_CFLAGS=-W) lib/mpi/mpicoder.c:40:2: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] Signed-off-by: Chen Gang Cc: Rusty Russell Cc: David Howells Cc: James Morris Cc: Andy Shevchenko Acked-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/lib/mpi/mpicoder.c b/lib/mpi/mpicoder.c index 5f9c44c..4cc6442 100644 --- a/lib/mpi/mpicoder.c +++ b/lib/mpi/mpicoder.c @@ -37,7 +37,7 @@ MPI mpi_read_raw_data(const void *xbuffer, size_t nbytes) mpi_limb_t a; MPI val = NULL; - while (nbytes >= 0 && buffer[0] == 0) { + while (nbytes > 0 && buffer[0] == 0) { buffer++; nbytes--; } -- cgit v0.10.2 From 7869e590679ed71cd1a1e676e8c1c179762c3efe Mon Sep 17 00:00:00 2001 From: "Xiaowei.Hu" Date: Wed, 12 Jun 2013 14:04:41 -0700 Subject: ocfs2: ocfs2_prep_new_orphaned_file() should return ret If an error occurs, for example an EIO in __ocfs2_prepare_orphan_dir, ocfs2_prep_new_orphaned_file will release the inode_ac, then when the caller of ocfs2_prep_new_orphaned_file gets a 0 return, it will refer to a NULL ocfs2_alloc_context struct in the following functions. A kernel panic happens. Signed-off-by: "Xiaowei.Hu" Reviewed-by: shencanquan Acked-by: Sunil Mushran Cc: Joe Jin Cc: Mark Fasheh Cc: Joel Becker Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c index 04ee1b5..b563351 100644 --- a/fs/ocfs2/namei.c +++ b/fs/ocfs2/namei.c @@ -2216,7 +2216,7 @@ out: brelse(orphan_dir_bh); - return 0; + return ret; } int ocfs2_create_inode_in_orphan(struct inode *dir, -- cgit v0.10.2 From f101a9464bfbda42730b54a66f926d75ed2cd31e Mon Sep 17 00:00:00 2001 From: Andrey Vagin Date: Wed, 12 Jun 2013 14:04:42 -0700 Subject: memcg: don't initialize kmem-cache destroying work for root caches struct memcg_cache_params has a union. Different parts of this union are used for root and non-root caches. A part with destroying work is used only for non-root caches. BUG: unable to handle kernel paging request at 0000000fffffffe0 IP: kmem_cache_alloc+0x41/0x1f0 Modules linked in: netlink_diag af_packet_diag udp_diag tcp_diag inet_diag unix_diag ip6table_filter ip6_tables i2c_piix4 virtio_net virtio_balloon microcode i2c_core pcspkr floppy CPU: 0 PID: 1929 Comm: lt-vzctl Tainted: G D 3.10.0-rc1+ #2 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 RIP: kmem_cache_alloc+0x41/0x1f0 Call Trace: getname_flags.part.34+0x30/0x140 getname+0x38/0x60 do_sys_open+0xc5/0x1e0 SyS_open+0x22/0x30 system_call_fastpath+0x16/0x1b Code: f4 53 48 83 ec 18 8b 05 8e 53 b7 00 4c 8b 4d 08 21 f0 a8 10 74 0d 4c 89 4d c0 e8 1b 76 4a 00 4c 8b 4d c0 e9 92 00 00 00 4d 89 f5 <4d> 8b 45 00 65 4c 03 04 25 48 cd 00 00 49 8b 50 08 4d 8b 38 49 RIP [] kmem_cache_alloc+0x41/0x1f0 Signed-off-by: Andrey Vagin Cc: Konstantin Khlebnikov Cc: Glauber Costa Cc: Johannes Weiner Cc: Balbir Singh Cc: KAMEZAWA Hiroyuki Reviewed-by: Michal Hocko Cc: Li Zefan Cc: [3.9.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 010d6c1..931e38c 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -3141,8 +3141,6 @@ int memcg_update_cache_size(struct kmem_cache *s, int num_groups) return -ENOMEM; } - INIT_WORK(&s->memcg_params->destroy, - kmem_cache_destroy_work_func); s->memcg_params->is_root_cache = true; /* -- cgit v0.10.2 From 5a280844bb3bcd79076cac6ad002f71d25c798e5 Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Wed, 12 Jun 2013 14:04:44 -0700 Subject: drivers/rtc/rtc-tps6586x.c: device wakeup flags correction Use device_init_wakeup() instead of device_set_wakeup_capable() and move it before rtc dev registering. This fixes alarmtimer not registered when tps6586x rtc is the only wakeup compatible rtc in the system. Signed-off-by: Dmitry Osipenko Cc: Laxman Dewangan Cc: Jingoo Han Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/rtc-tps6586x.c b/drivers/rtc/rtc-tps6586x.c index 459c2ff..426901c 100644 --- a/drivers/rtc/rtc-tps6586x.c +++ b/drivers/rtc/rtc-tps6586x.c @@ -273,6 +273,8 @@ static int tps6586x_rtc_probe(struct platform_device *pdev) return ret; } + device_init_wakeup(&pdev->dev, 1); + platform_set_drvdata(pdev, rtc); rtc->rtc = devm_rtc_device_register(&pdev->dev, dev_name(&pdev->dev), &tps6586x_rtc_ops, THIS_MODULE); @@ -292,7 +294,6 @@ static int tps6586x_rtc_probe(struct platform_device *pdev) goto fail_rtc_register; } disable_irq(rtc->irq); - device_set_wakeup_capable(&pdev->dev, 1); return 0; fail_rtc_register: -- cgit v0.10.2 From ebf8d6c8630bfd3e24683306599cb953c9a2842c Mon Sep 17 00:00:00 2001 From: Derek Basehore Date: Wed, 12 Jun 2013 14:04:45 -0700 Subject: drivers/rtc/rtc-cmos.c: fix accidentally enabling rtc channel During resume, we call hpet_rtc_timer_init after masking an irq bit in hpet. This will cause the call to hpet_disable_rtc_channel to be undone if RTC_AIE is the only bit not masked. Allowing the cmos interrupt handler to run before resuming caused some issues where the timer for the alarm was not removed. This would cause other, later timers to not be cleared, so utilities such as hwclock would time out when waiting for the update interrupt. [akpm@linux-foundation.org: coding-style tweak] Signed-off-by: Derek Basehore Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index cc5bea9..f1cb706 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -854,6 +854,9 @@ static int cmos_resume(struct device *dev) } spin_lock_irq(&rtc_lock); + if (device_may_wakeup(dev)) + hpet_rtc_timer_init(); + do { CMOS_WRITE(tmp, RTC_CONTROL); hpet_set_rtc_irq_bit(tmp & RTC_IRQMASK); @@ -869,7 +872,6 @@ static int cmos_resume(struct device *dev) rtc_update_irq(cmos->rtc, 1, mask); tmp &= ~RTC_AIE; hpet_mask_rtc_irq_bit(RTC_AIE); - hpet_rtc_timer_init(); } while (mask & RTC_AIE); spin_unlock_irq(&rtc_lock); } -- cgit v0.10.2 From f000cfdde5de4fc15dead5ccf524359c07eadf2b Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Wed, 12 Jun 2013 14:04:46 -0700 Subject: audit: wait_for_auditd() should use TASK_UNINTERRUPTIBLE audit_log_start() does wait_for_auditd() in a loop until audit_backlog_wait_time passes or audit_skb_queue has a room. If signal_pending() is true this becomes a busy-wait loop, schedule() in TASK_INTERRUPTIBLE won't block. Thanks to Guy for fully investigating and explaining the problem. (akpm: that'll cause the system to lock up on a non-preemptible uniprocessor kernel) (Guy: "Our customer was in fact running a uniprocessor machine, and they reported a system hang.") Signed-off-by: Oleg Nesterov Reported-by: Guy Streeter Cc: Eric Paris Cc: Al Viro Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/audit.c b/kernel/audit.c index 21c7fa6..91e53d0 100644 --- a/kernel/audit.c +++ b/kernel/audit.c @@ -1056,7 +1056,7 @@ static inline void audit_get_stamp(struct audit_context *ctx, static void wait_for_auditd(unsigned long sleep_time) { DECLARE_WAITQUEUE(wait, current); - set_current_state(TASK_INTERRUPTIBLE); + set_current_state(TASK_UNINTERRUPTIBLE); add_wait_queue(&audit_backlog_wait, &wait); if (audit_backlog_limit && -- cgit v0.10.2 From 03f47e888daf56c8e9046c674719a0bcc644eed5 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Wed, 12 Jun 2013 14:04:47 -0700 Subject: cciss: fix broken mutex usage in ioctl If a new logical drive is added and the CCISS_REGNEWD ioctl is invoked (as is normal with the Array Configuration Utility) the process will hang as below. It attempts to acquire the same mutex twice, once in do_ioctl() and once in cciss_unlocked_open(). The BKL was recursive, the mutex isn't. Linux version 3.10.0-rc2 (scameron@localhost.localdomain) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Fri May 24 14:32:12 CDT 2013 [...] acu D 0000000000000001 0 3246 3191 0x00000080 Call Trace: schedule+0x29/0x70 schedule_preempt_disabled+0xe/0x10 __mutex_lock_slowpath+0x17b/0x220 mutex_lock+0x2b/0x50 cciss_unlocked_open+0x2f/0x110 [cciss] __blkdev_get+0xd3/0x470 blkdev_get+0x5c/0x1e0 register_disk+0x182/0x1a0 add_disk+0x17c/0x310 cciss_add_disk+0x13a/0x170 [cciss] cciss_update_drive_info+0x39b/0x480 [cciss] rebuild_lun_table+0x258/0x370 [cciss] cciss_ioctl+0x34f/0x470 [cciss] do_ioctl+0x49/0x70 [cciss] __blkdev_driver_ioctl+0x28/0x30 blkdev_ioctl+0x200/0x7b0 block_ioctl+0x3c/0x40 do_vfs_ioctl+0x89/0x350 SyS_ioctl+0xa1/0xb0 system_call_fastpath+0x16/0x1b This mutex usage was added into the ioctl path when the big kernel lock was removed. As it turns out, these paths are all thread safe anyway (or can easily be made so) and we don't want ioctl() to be single threaded in any case. Signed-off-by: Stephen M. Cameron Cc: Jens Axboe Cc: Mike Miller Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 6374dc1..62b6c2c 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -168,8 +168,6 @@ static irqreturn_t do_cciss_msix_intr(int irq, void *dev_id); static int cciss_open(struct block_device *bdev, fmode_t mode); static int cciss_unlocked_open(struct block_device *bdev, fmode_t mode); static void cciss_release(struct gendisk *disk, fmode_t mode); -static int do_ioctl(struct block_device *bdev, fmode_t mode, - unsigned int cmd, unsigned long arg); static int cciss_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg); static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo); @@ -235,7 +233,7 @@ static const struct block_device_operations cciss_fops = { .owner = THIS_MODULE, .open = cciss_unlocked_open, .release = cciss_release, - .ioctl = do_ioctl, + .ioctl = cciss_ioctl, .getgeo = cciss_getgeo, #ifdef CONFIG_COMPAT .compat_ioctl = cciss_compat_ioctl, @@ -1143,16 +1141,6 @@ static void cciss_release(struct gendisk *disk, fmode_t mode) mutex_unlock(&cciss_mutex); } -static int do_ioctl(struct block_device *bdev, fmode_t mode, - unsigned cmd, unsigned long arg) -{ - int ret; - mutex_lock(&cciss_mutex); - ret = cciss_ioctl(bdev, mode, cmd, arg); - mutex_unlock(&cciss_mutex); - return ret; -} - #ifdef CONFIG_COMPAT static int cciss_ioctl32_passthru(struct block_device *bdev, fmode_t mode, @@ -1179,7 +1167,7 @@ static int cciss_compat_ioctl(struct block_device *bdev, fmode_t mode, case CCISS_REGNEWD: case CCISS_RESCANDISK: case CCISS_GETLUNINFO: - return do_ioctl(bdev, mode, cmd, arg); + return cciss_ioctl(bdev, mode, cmd, arg); case CCISS_PASSTHRU32: return cciss_ioctl32_passthru(bdev, mode, cmd, arg); @@ -1219,7 +1207,7 @@ static int cciss_ioctl32_passthru(struct block_device *bdev, fmode_t mode, if (err) return -EFAULT; - err = do_ioctl(bdev, mode, CCISS_PASSTHRU, (unsigned long)p); + err = cciss_ioctl(bdev, mode, CCISS_PASSTHRU, (unsigned long)p); if (err) return err; err |= @@ -1261,7 +1249,7 @@ static int cciss_ioctl32_big_passthru(struct block_device *bdev, fmode_t mode, if (err) return -EFAULT; - err = do_ioctl(bdev, mode, CCISS_BIG_PASSTHRU, (unsigned long)p); + err = cciss_ioctl(bdev, mode, CCISS_BIG_PASSTHRU, (unsigned long)p); if (err) return err; err |= @@ -1311,11 +1299,14 @@ static int cciss_getpciinfo(ctlr_info_t *h, void __user *argp) static int cciss_getintinfo(ctlr_info_t *h, void __user *argp) { cciss_coalint_struct intinfo; + unsigned long flags; if (!argp) return -EINVAL; + spin_lock_irqsave(&h->lock, flags); intinfo.delay = readl(&h->cfgtable->HostWrite.CoalIntDelay); intinfo.count = readl(&h->cfgtable->HostWrite.CoalIntCount); + spin_unlock_irqrestore(&h->lock, flags); if (copy_to_user (argp, &intinfo, sizeof(cciss_coalint_struct))) return -EFAULT; @@ -1356,12 +1347,15 @@ static int cciss_setintinfo(ctlr_info_t *h, void __user *argp) static int cciss_getnodename(ctlr_info_t *h, void __user *argp) { NodeName_type NodeName; + unsigned long flags; int i; if (!argp) return -EINVAL; + spin_lock_irqsave(&h->lock, flags); for (i = 0; i < 16; i++) NodeName[i] = readb(&h->cfgtable->ServerName[i]); + spin_unlock_irqrestore(&h->lock, flags); if (copy_to_user(argp, NodeName, sizeof(NodeName_type))) return -EFAULT; return 0; @@ -1398,10 +1392,13 @@ static int cciss_setnodename(ctlr_info_t *h, void __user *argp) static int cciss_getheartbeat(ctlr_info_t *h, void __user *argp) { Heartbeat_type heartbeat; + unsigned long flags; if (!argp) return -EINVAL; + spin_lock_irqsave(&h->lock, flags); heartbeat = readl(&h->cfgtable->HeartBeat); + spin_unlock_irqrestore(&h->lock, flags); if (copy_to_user(argp, &heartbeat, sizeof(Heartbeat_type))) return -EFAULT; return 0; @@ -1410,10 +1407,13 @@ static int cciss_getheartbeat(ctlr_info_t *h, void __user *argp) static int cciss_getbustypes(ctlr_info_t *h, void __user *argp) { BusTypes_type BusTypes; + unsigned long flags; if (!argp) return -EINVAL; + spin_lock_irqsave(&h->lock, flags); BusTypes = readl(&h->cfgtable->BusTypes); + spin_unlock_irqrestore(&h->lock, flags); if (copy_to_user(argp, &BusTypes, sizeof(BusTypes_type))) return -EFAULT; return 0; -- cgit v0.10.2 From 24b8256a1fb28d357bc6fa09184ba29b4255ba5c Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 12 Jun 2013 14:04:48 -0700 Subject: drivers/rtc/rtc-twl.c: fix missing device_init_wakeup() when booted with device tree When booted in legacy mode device_init_wakeup() gets called by drivers/mfd/twl-core.c when the children are initialized. However, when booted using device tree, the children are created with of_platform_populate() instead add_children(). This means that the RTC driver will not have device_init_wakeup() set, and we need to call it from the driver probe like RTC drivers typically do. Without this we cannot test PM wake-up events on omaps for cases where there may not be any physical wake-up event. Signed-off-by: Tony Lindgren Reported-by: Kevin Hilman Cc: Alessandro Zummo Cc: Jingoo Han Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/rtc-twl.c b/drivers/rtc/rtc-twl.c index 8751a52..b2eab34 100644 --- a/drivers/rtc/rtc-twl.c +++ b/drivers/rtc/rtc-twl.c @@ -524,6 +524,7 @@ static int twl_rtc_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, rtc); + device_init_wakeup(&pdev->dev, 1); return 0; out2: -- cgit v0.10.2 From cbab0e4eec299e9059199ebe6daf48730be46d2b Mon Sep 17 00:00:00 2001 From: Rafael Aquini Date: Wed, 12 Jun 2013 14:04:49 -0700 Subject: swap: avoid read_swap_cache_async() race to deadlock while waiting on discard I/O completion read_swap_cache_async() can race against get_swap_page(), and stumble across a SWAP_HAS_CACHE entry in the swap map whose page wasn't brought into the swapcache yet. This transient swap_map state is expected to be transitory, but the actual placement of discard at scan_swap_map() inserts a wait for I/O completion thus making the thread at read_swap_cache_async() to loop around its -EEXIST case, while the other end at get_swap_page() is scheduled away at scan_swap_map(). This can leave the system deadlocked if the I/O completion happens to be waiting on the CPU waitqueue where read_swap_cache_async() is busy looping and !CONFIG_PREEMPT. This patch introduces a cond_resched() call to make the aforementioned read_swap_cache_async() busy loop condition to bail out when necessary, thus avoiding the subtle race window. Signed-off-by: Rafael Aquini Acked-by: Johannes Weiner Acked-by: KOSAKI Motohiro Acked-by: Hugh Dickins Cc: Shaohua Li Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/swap_state.c b/mm/swap_state.c index b3d40dc..f24ab0d 100644 --- a/mm/swap_state.c +++ b/mm/swap_state.c @@ -336,8 +336,24 @@ struct page *read_swap_cache_async(swp_entry_t entry, gfp_t gfp_mask, * Swap entry may have been freed since our caller observed it. */ err = swapcache_prepare(entry); - if (err == -EEXIST) { /* seems racy */ + if (err == -EEXIST) { radix_tree_preload_end(); + /* + * We might race against get_swap_page() and stumble + * across a SWAP_HAS_CACHE swap_map entry whose page + * has not been brought into the swapcache yet, while + * the other end is scheduled away waiting on discard + * I/O completion at scan_swap_map(). + * + * In order to avoid turning this transitory state + * into a permanent loop around this -EEXIST case + * if !CONFIG_PREEMPT and the I/O completion happens + * to be waiting on the CPU waitqueue where we are now + * busy looping, we just conditionally invoke the + * scheduler here, if there are some more important + * tasks to run. + */ + cond_resched(); continue; } if (err) { /* swp entry is obsolete ? */ -- cgit v0.10.2 From e099127169429c19544a8f55dd26937fddd5b1f4 Mon Sep 17 00:00:00 2001 From: Goldwyn Rodrigues Date: Wed, 12 Jun 2013 14:04:51 -0700 Subject: fs/ocfs2/namei.c: remove unecessary ERROR when removing non-empty directory While removing a non-empty directory, the kernel dumps a message: (rmdir,21743,1):ocfs2_unlink:953 ERROR: status = -39 Suppress the error message from being printed in the dmesg so users don't panic. Signed-off-by: Goldwyn Rodrigues Cc: Mark Fasheh Cc: Joel Becker Acked-by: Sunil Mushran Reviewed-by: Jie Liu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c index b563351..b4a5cdf 100644 --- a/fs/ocfs2/namei.c +++ b/fs/ocfs2/namei.c @@ -947,7 +947,7 @@ leave: ocfs2_free_dir_lookup_result(&orphan_insert); ocfs2_free_dir_lookup_result(&lookup); - if (status) + if (status && (status != -ENOTEMPTY)) mlog_errno(status); return status; -- cgit v0.10.2 From 558c61e5579a81551c0d6c2deaed1da3c7bf714a Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 12 Jun 2013 14:04:52 -0700 Subject: rtc-at91rm9200: add match-table compile guard The members of Atmel's at91sam9x5 family (9x5) have a broken RTC interrupt mask register (AT91_RTC_IMR). It does not reflect enabled interrupts but instead always returns zero. The kernel's rtc-at91rm9200 driver handles the RTC for the 9x5 family. Currently when the date/time is set, an interrupt is generated and this driver neglects to handle the interrupt. The kernel complains about the un-handled interrupt and disables it henceforth. This not only breaks the RTC function, but since that interrupt is shared (Atmel's SYS interrupt) then other things break as well (e.g. the debug port no longer accepts characters). Tested on the at91sam9g25. Bug confirmed by Atmel. This patch (of 5): Add missing match-table compile guard. Signed-off-by: Johan Hovold Acked-by: Nicolas Ferre Cc: Douglas Gilbert Cc: Jean-Christophe PLAGNIOL-VILLARD Cc: Ludovic Desroches Cc: Robert Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c index 0eab77b..eeeb73f 100644 --- a/drivers/rtc/rtc-at91rm9200.c +++ b/drivers/rtc/rtc-at91rm9200.c @@ -383,11 +383,13 @@ static int at91_rtc_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(at91_rtc_pm_ops, at91_rtc_suspend, at91_rtc_resume); +#ifdef CONFIG_OF static const struct of_device_id at91_rtc_dt_ids[] = { { .compatible = "atmel,at91rm9200-rtc" }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, at91_rtc_dt_ids); +#endif static struct platform_driver at91_rtc_driver = { .remove = __exit_p(at91_rtc_remove), -- cgit v0.10.2 From de645475913f677eb024b3d2bd52e264e8106497 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 12 Jun 2013 14:04:53 -0700 Subject: rtc-at91rm9200: add configuration support Add configuration support which can be used to implement SoC-specific workarounds for broken hardware. Signed-off-by: Johan Hovold Acked-by: Nicolas Ferre Cc: Douglas Gilbert Cc: Jean-Christophe PLAGNIOL-VILLARD Cc: Ludovic Desroches Cc: Robert Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c index eeeb73f..ab2024b 100644 --- a/drivers/rtc/rtc-at91rm9200.c +++ b/drivers/rtc/rtc-at91rm9200.c @@ -42,6 +42,10 @@ #define AT91_RTC_EPOCH 1900UL /* just like arch/arm/common/rtctime.c */ +struct at91_rtc_config { +}; + +static const struct at91_rtc_config *at91_rtc_config; static DECLARE_COMPLETION(at91_rtc_updated); static unsigned int at91_alarm_year = AT91_RTC_EPOCH; static void __iomem *at91_rtc_regs; @@ -250,6 +254,36 @@ static irqreturn_t at91_rtc_interrupt(int irq, void *dev_id) return IRQ_NONE; /* not handled */ } +static const struct at91_rtc_config at91rm9200_config = { +}; + +#ifdef CONFIG_OF +static const struct of_device_id at91_rtc_dt_ids[] = { + { + .compatible = "atmel,at91rm9200-rtc", + .data = &at91rm9200_config, + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(of, at91_rtc_dt_ids); +#endif + +static const struct at91_rtc_config * +at91_rtc_get_config(struct platform_device *pdev) +{ + const struct of_device_id *match; + + if (pdev->dev.of_node) { + match = of_match_node(at91_rtc_dt_ids, pdev->dev.of_node); + if (!match) + return NULL; + return (const struct at91_rtc_config *)match->data; + } + + return &at91rm9200_config; +} + static const struct rtc_class_ops at91_rtc_ops = { .read_time = at91_rtc_readtime, .set_time = at91_rtc_settime, @@ -268,6 +302,10 @@ static int __init at91_rtc_probe(struct platform_device *pdev) struct resource *regs; int ret = 0; + at91_rtc_config = at91_rtc_get_config(pdev); + if (!at91_rtc_config) + return -ENODEV; + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!regs) { dev_err(&pdev->dev, "no mmio resource defined\n"); @@ -383,14 +421,6 @@ static int at91_rtc_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(at91_rtc_pm_ops, at91_rtc_suspend, at91_rtc_resume); -#ifdef CONFIG_OF -static const struct of_device_id at91_rtc_dt_ids[] = { - { .compatible = "atmel,at91rm9200-rtc" }, - { /* sentinel */ } -}; -MODULE_DEVICE_TABLE(of, at91_rtc_dt_ids); -#endif - static struct platform_driver at91_rtc_driver = { .remove = __exit_p(at91_rtc_remove), .driver = { -- cgit v0.10.2 From e304fcd075a0e97d0e538dd4408b95406b505f85 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 12 Jun 2013 14:04:55 -0700 Subject: rtc-at91rm9200: refactor interrupt-register handling Add accessors for the interrupt register. This will allow us to easily add a shadow interrupt-mask register to use on SoCs where the interrupt-mask register cannot be used. Signed-off-by: Johan Hovold Acked-by: Nicolas Ferre Cc: Douglas Gilbert Cc: Jean-Christophe PLAGNIOL-VILLARD Cc: Ludovic Desroches Cc: Robert Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c index ab2024b..9592d08 100644 --- a/drivers/rtc/rtc-at91rm9200.c +++ b/drivers/rtc/rtc-at91rm9200.c @@ -51,6 +51,21 @@ static unsigned int at91_alarm_year = AT91_RTC_EPOCH; static void __iomem *at91_rtc_regs; static int irq; +static void at91_rtc_write_ier(u32 mask) +{ + at91_rtc_write(AT91_RTC_IER, mask); +} + +static void at91_rtc_write_idr(u32 mask) +{ + at91_rtc_write(AT91_RTC_IDR, mask); +} + +static u32 at91_rtc_read_imr(void) +{ + return at91_rtc_read(AT91_RTC_IMR); +} + /* * Decode time/date into rtc_time structure */ @@ -114,9 +129,9 @@ static int at91_rtc_settime(struct device *dev, struct rtc_time *tm) cr = at91_rtc_read(AT91_RTC_CR); at91_rtc_write(AT91_RTC_CR, cr | AT91_RTC_UPDCAL | AT91_RTC_UPDTIM); - at91_rtc_write(AT91_RTC_IER, AT91_RTC_ACKUPD); + at91_rtc_write_ier(AT91_RTC_ACKUPD); wait_for_completion(&at91_rtc_updated); /* wait for ACKUPD interrupt */ - at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD); + at91_rtc_write_idr(AT91_RTC_ACKUPD); at91_rtc_write(AT91_RTC_TIMR, bin2bcd(tm->tm_sec) << 0 @@ -148,7 +163,7 @@ static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year); tm->tm_year = at91_alarm_year - 1900; - alrm->enabled = (at91_rtc_read(AT91_RTC_IMR) & AT91_RTC_ALARM) + alrm->enabled = (at91_rtc_read_imr() & AT91_RTC_ALARM) ? 1 : 0; dev_dbg(dev, "%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__, @@ -173,7 +188,7 @@ static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) tm.tm_min = alrm->time.tm_min; tm.tm_sec = alrm->time.tm_sec; - at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ALARM); + at91_rtc_write_idr(AT91_RTC_ALARM); at91_rtc_write(AT91_RTC_TIMALR, bin2bcd(tm.tm_sec) << 0 | bin2bcd(tm.tm_min) << 8 @@ -186,7 +201,7 @@ static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) if (alrm->enabled) { at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM); - at91_rtc_write(AT91_RTC_IER, AT91_RTC_ALARM); + at91_rtc_write_ier(AT91_RTC_ALARM); } dev_dbg(dev, "%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__, @@ -202,9 +217,9 @@ static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) if (enabled) { at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM); - at91_rtc_write(AT91_RTC_IER, AT91_RTC_ALARM); + at91_rtc_write_ier(AT91_RTC_ALARM); } else - at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ALARM); + at91_rtc_write_idr(AT91_RTC_ALARM); return 0; } @@ -213,7 +228,7 @@ static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) */ static int at91_rtc_proc(struct device *dev, struct seq_file *seq) { - unsigned long imr = at91_rtc_read(AT91_RTC_IMR); + unsigned long imr = at91_rtc_read_imr(); seq_printf(seq, "update_IRQ\t: %s\n", (imr & AT91_RTC_ACKUPD) ? "yes" : "no"); @@ -233,7 +248,7 @@ static irqreturn_t at91_rtc_interrupt(int irq, void *dev_id) unsigned int rtsr; unsigned long events = 0; - rtsr = at91_rtc_read(AT91_RTC_SR) & at91_rtc_read(AT91_RTC_IMR); + rtsr = at91_rtc_read(AT91_RTC_SR) & at91_rtc_read_imr(); if (rtsr) { /* this interrupt is shared! Is it ours? */ if (rtsr & AT91_RTC_ALARM) events |= (RTC_AF | RTC_IRQF); @@ -328,7 +343,7 @@ static int __init at91_rtc_probe(struct platform_device *pdev) at91_rtc_write(AT91_RTC_MR, 0); /* 24 hour mode */ /* Disable all interrupts */ - at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM | + at91_rtc_write_idr(AT91_RTC_ACKUPD | AT91_RTC_ALARM | AT91_RTC_SECEV | AT91_RTC_TIMEV | AT91_RTC_CALEV); @@ -373,7 +388,7 @@ static int __exit at91_rtc_remove(struct platform_device *pdev) struct rtc_device *rtc = platform_get_drvdata(pdev); /* Disable all interrupts */ - at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM | + at91_rtc_write_idr(AT91_RTC_ACKUPD | AT91_RTC_ALARM | AT91_RTC_SECEV | AT91_RTC_TIMEV | AT91_RTC_CALEV); free_irq(irq, pdev); @@ -396,13 +411,13 @@ static int at91_rtc_suspend(struct device *dev) /* this IRQ is shared with DBGU and other hardware which isn't * necessarily doing PM like we are... */ - at91_rtc_imr = at91_rtc_read(AT91_RTC_IMR) + at91_rtc_imr = at91_rtc_read_imr() & (AT91_RTC_ALARM|AT91_RTC_SECEV); if (at91_rtc_imr) { if (device_may_wakeup(dev)) enable_irq_wake(irq); else - at91_rtc_write(AT91_RTC_IDR, at91_rtc_imr); + at91_rtc_write_idr(at91_rtc_imr); } return 0; } @@ -413,7 +428,7 @@ static int at91_rtc_resume(struct device *dev) if (device_may_wakeup(dev)) disable_irq_wake(irq); else - at91_rtc_write(AT91_RTC_IER, at91_rtc_imr); + at91_rtc_write_ier(at91_rtc_imr); } return 0; } -- cgit v0.10.2 From e9f08bbe3f97829975d2b59091ef557101c83f61 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 12 Jun 2013 14:04:56 -0700 Subject: rtc-at91rm9200: add shadow interrupt mask Add shadow interrupt-mask register which can be used on SoCs where the actual hardware register is broken. Note that some care needs to be taken to make sure the shadow mask corresponds to the actual hardware state. The added overhead is not an issue for the non-broken SoCs due to the relatively infrequent interrupt-mask updates. We do, however, only use the shadow mask value as a fall-back when it actually needed as there is still a theoretical possibility that the mask is incorrect (see the code for details). Signed-off-by: Johan Hovold Acked-by: Nicolas Ferre Cc: Douglas Gilbert Cc: Jean-Christophe PLAGNIOL-VILLARD Cc: Ludovic Desroches Cc: Robert Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c index 9592d08..811a102 100644 --- a/drivers/rtc/rtc-at91rm9200.c +++ b/drivers/rtc/rtc-at91rm9200.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -43,6 +44,7 @@ #define AT91_RTC_EPOCH 1900UL /* just like arch/arm/common/rtctime.c */ struct at91_rtc_config { + bool use_shadow_imr; }; static const struct at91_rtc_config *at91_rtc_config; @@ -50,20 +52,55 @@ static DECLARE_COMPLETION(at91_rtc_updated); static unsigned int at91_alarm_year = AT91_RTC_EPOCH; static void __iomem *at91_rtc_regs; static int irq; +static DEFINE_SPINLOCK(at91_rtc_lock); +static u32 at91_rtc_shadow_imr; static void at91_rtc_write_ier(u32 mask) { + unsigned long flags; + + spin_lock_irqsave(&at91_rtc_lock, flags); + at91_rtc_shadow_imr |= mask; at91_rtc_write(AT91_RTC_IER, mask); + spin_unlock_irqrestore(&at91_rtc_lock, flags); } static void at91_rtc_write_idr(u32 mask) { + unsigned long flags; + + spin_lock_irqsave(&at91_rtc_lock, flags); at91_rtc_write(AT91_RTC_IDR, mask); + /* + * Register read back (of any RTC-register) needed to make sure + * IDR-register write has reached the peripheral before updating + * shadow mask. + * + * Note that there is still a possibility that the mask is updated + * before interrupts have actually been disabled in hardware. The only + * way to be certain would be to poll the IMR-register, which is is + * the very register we are trying to emulate. The register read back + * is a reasonable heuristic. + */ + at91_rtc_read(AT91_RTC_SR); + at91_rtc_shadow_imr &= ~mask; + spin_unlock_irqrestore(&at91_rtc_lock, flags); } static u32 at91_rtc_read_imr(void) { - return at91_rtc_read(AT91_RTC_IMR); + unsigned long flags; + u32 mask; + + if (at91_rtc_config->use_shadow_imr) { + spin_lock_irqsave(&at91_rtc_lock, flags); + mask = at91_rtc_shadow_imr; + spin_unlock_irqrestore(&at91_rtc_lock, flags); + } else { + mask = at91_rtc_read(AT91_RTC_IMR); + } + + return mask; } /* -- cgit v0.10.2 From bba00e59107275faa615573c44eb0a513a1220a6 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 12 Jun 2013 14:04:57 -0700 Subject: rtc-at91rm9200: use shadow IMR on at91sam9x5 Add support for the at91sam9x5-family which must use the shadow interrupt mask due to a hardware issue (causing RTC_IMR to always be zero). Signed-off-by: Johan Hovold Acked-by: Nicolas Ferre Cc: Douglas Gilbert Cc: Jean-Christophe PLAGNIOL-VILLARD Cc: Ludovic Desroches Cc: Robert Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt index 2a3feab..34c1505 100644 --- a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt @@ -1,7 +1,7 @@ Atmel AT91RM9200 Real Time Clock Required properties: -- compatible: should be: "atmel,at91rm9200-rtc" +- compatible: should be: "atmel,at91rm9200-rtc" or "atmel,at91sam9x5-rtc" - reg: physical base address of the controller and length of memory mapped region. - interrupts: rtc alarm/event interrupt diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c index 811a102..f296f3f 100644 --- a/drivers/rtc/rtc-at91rm9200.c +++ b/drivers/rtc/rtc-at91rm9200.c @@ -309,12 +309,19 @@ static irqreturn_t at91_rtc_interrupt(int irq, void *dev_id) static const struct at91_rtc_config at91rm9200_config = { }; +static const struct at91_rtc_config at91sam9x5_config = { + .use_shadow_imr = true, +}; + #ifdef CONFIG_OF static const struct of_device_id at91_rtc_dt_ids[] = { { .compatible = "atmel,at91rm9200-rtc", .data = &at91rm9200_config, }, { + .compatible = "atmel,at91sam9x5-rtc", + .data = &at91sam9x5_config, + }, { /* sentinel */ } }; -- cgit v0.10.2 From 4fcc712f5c48b1e32cdbf9b9cfba42a27b2e3160 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Wed, 12 Jun 2013 14:04:59 -0700 Subject: aio: fix io_destroy() regression by using call_rcu() There was a regression introduced by 36f5588905c1 ("aio: refcounting cleanup"), reported by Jens Axboe - the refcounting cleanup switched to using RCU in the shutdown path, but the synchronize_rcu() was done in the context of the io_destroy() syscall greatly increasing the time it could block. This patch switches it to call_rcu() and makes shutdown asynchronous (more asynchronous than it was originally; before the refcount changes io_destroy() would still wait on pending kiocbs). Note that there's a global quota on the max outstanding kiocbs, and that quota must be manipulated synchronously; otherwise io_setup() could return -EAGAIN when there isn't quota available, and userspace won't have any way of waiting until shutdown of the old kioctxs has finished (besides busy looping). So we release our quota before kioctx shutdown has finished, which should be fine since the quota never corresponded to anything real anyways. Signed-off-by: Kent Overstreet Cc: Zach Brown Cc: Felipe Balbi Cc: Greg Kroah-Hartman Cc: Mark Fasheh Cc: Joel Becker Cc: Rusty Russell Reported-by: Jens Axboe Tested-by: Jens Axboe Cc: Asai Thambi S P Cc: Selvan Mani Cc: Sam Bradshaw Cc: Jeff Moyer Cc: Al Viro Signed-off-by: Benjamin LaHaise Tested-by: Benjamin LaHaise Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/aio.c b/fs/aio.c index 7fe5bde..2bbcacf 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -141,9 +141,6 @@ static void aio_free_ring(struct kioctx *ctx) for (i = 0; i < ctx->nr_pages; i++) put_page(ctx->ring_pages[i]); - if (ctx->mmap_size) - vm_munmap(ctx->mmap_base, ctx->mmap_size); - if (ctx->ring_pages && ctx->ring_pages != ctx->internal_pages) kfree(ctx->ring_pages); } @@ -322,11 +319,6 @@ static void free_ioctx(struct kioctx *ctx) aio_free_ring(ctx); - spin_lock(&aio_nr_lock); - BUG_ON(aio_nr - ctx->max_reqs > aio_nr); - aio_nr -= ctx->max_reqs; - spin_unlock(&aio_nr_lock); - pr_debug("freeing %p\n", ctx); /* @@ -435,17 +427,24 @@ static void kill_ioctx(struct kioctx *ctx) { if (!atomic_xchg(&ctx->dead, 1)) { hlist_del_rcu(&ctx->list); - /* Between hlist_del_rcu() and dropping the initial ref */ - synchronize_rcu(); /* - * We can't punt to workqueue here because put_ioctx() -> - * free_ioctx() will unmap the ringbuffer, and that has to be - * done in the original process's context. kill_ioctx_rcu/work() - * exist for exit_aio(), as in that path free_ioctx() won't do - * the unmap. + * It'd be more correct to do this in free_ioctx(), after all + * the outstanding kiocbs have finished - but by then io_destroy + * has already returned, so io_setup() could potentially return + * -EAGAIN with no ioctxs actually in use (as far as userspace + * could tell). */ - kill_ioctx_work(&ctx->rcu_work); + spin_lock(&aio_nr_lock); + BUG_ON(aio_nr - ctx->max_reqs > aio_nr); + aio_nr -= ctx->max_reqs; + spin_unlock(&aio_nr_lock); + + if (ctx->mmap_size) + vm_munmap(ctx->mmap_base, ctx->mmap_size); + + /* Between hlist_del_rcu() and dropping the initial ref */ + call_rcu(&ctx->rcu_head, kill_ioctx_rcu); } } @@ -495,10 +494,7 @@ void exit_aio(struct mm_struct *mm) */ ctx->mmap_size = 0; - if (!atomic_xchg(&ctx->dead, 1)) { - hlist_del_rcu(&ctx->list); - call_rcu(&ctx->rcu_head, kill_ioctx_rcu); - } + kill_ioctx(ctx); } } -- cgit v0.10.2 From 282c4c0ecce9b9ac1b69acae32a4239441601405 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 12 Jun 2013 14:05:00 -0700 Subject: drivers/misc/sgi-gru/grufile.c: fix info leak in gru_get_config_info() The "info.fill" array isn't initialized so it can leak uninitialized stack information to user space. Signed-off-by: Dan Carpenter Acked-by: Robin Holt Acked-by: Dimitri Sivanich Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c index 44d273c..0535d1e 100644 --- a/drivers/misc/sgi-gru/grufile.c +++ b/drivers/misc/sgi-gru/grufile.c @@ -172,6 +172,7 @@ static long gru_get_config_info(unsigned long arg) nodesperblade = 2; else nodesperblade = 1; + memset(&info, 0, sizeof(info)); info.cpus = num_online_cpus(); info.nodes = num_online_nodes(); info.blades = info.nodes / nodesperblade; -- cgit v0.10.2 From 026b08147923142e925a7d0aaa39038055ae0156 Mon Sep 17 00:00:00 2001 From: Tomasz Stanislawski Date: Wed, 12 Jun 2013 14:05:02 -0700 Subject: mm/page_alloc.c: fix watermark check in __zone_watermark_ok() The watermark check consists of two sub-checks. The first one is: if (free_pages <= min + lowmem_reserve) return false; The check assures that there is minimal amount of RAM in the zone. If CMA is used then the free_pages is reduced by the number of free pages in CMA prior to the over-mentioned check. if (!(alloc_flags & ALLOC_CMA)) free_pages -= zone_page_state(z, NR_FREE_CMA_PAGES); This prevents the zone from being drained from pages available for non-movable allocations. The second check prevents the zone from getting too fragmented. for (o = 0; o < order; o++) { free_pages -= z->free_area[o].nr_free << o; min >>= 1; if (free_pages <= min) return false; } The field z->free_area[o].nr_free is equal to the number of free pages including free CMA pages. Therefore the CMA pages are subtracted twice. This may cause a false positive fail of __zone_watermark_ok() if the CMA area gets strongly fragmented. In such a case there are many 0-order free pages located in CMA. Those pages are subtracted twice therefore they will quickly drain free_pages during the check against fragmentation. The test fails even though there are many free non-cma pages in the zone. This patch fixes this issue by subtracting CMA pages only for a purpose of (free_pages <= min + lowmem_reserve) check. Laura said: We were observing allocation failures of higher order pages (order 5 = 128K typically) under tight memory conditions resulting in driver failure. The output from the page allocation failure showed plenty of free pages of the appropriate order/type/zone and mostly CMA pages in the lower orders. For full disclosure, we still observed some page allocation failures even after applying the patch but the number was drastically reduced and those failures were attributed to fragmentation/other system issues. Signed-off-by: Tomasz Stanislawski Signed-off-by: Kyungmin Park Tested-by: Laura Abbott Cc: Bartlomiej Zolnierkiewicz Acked-by: Minchan Kim Cc: Mel Gorman Tested-by: Marek Szyprowski Cc: [3.7+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 378a15b..c3edb62 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -1628,6 +1628,7 @@ static bool __zone_watermark_ok(struct zone *z, int order, unsigned long mark, long min = mark; long lowmem_reserve = z->lowmem_reserve[classzone_idx]; int o; + long free_cma = 0; free_pages -= (1 << order) - 1; if (alloc_flags & ALLOC_HIGH) @@ -1637,9 +1638,10 @@ static bool __zone_watermark_ok(struct zone *z, int order, unsigned long mark, #ifdef CONFIG_CMA /* If allocation can't use CMA areas don't use free CMA pages */ if (!(alloc_flags & ALLOC_CMA)) - free_pages -= zone_page_state(z, NR_FREE_CMA_PAGES); + free_cma = zone_page_state(z, NR_FREE_CMA_PAGES); #endif - if (free_pages <= min + lowmem_reserve) + + if (free_pages - free_cma <= min + lowmem_reserve) return false; for (o = 0; o < order; o++) { /* At the next order, this order's pages become unavailable */ -- cgit v0.10.2 From 27749f2ff0717e115680922000839ad6a576eddf Mon Sep 17 00:00:00 2001 From: Xue jiufei Date: Wed, 12 Jun 2013 14:05:03 -0700 Subject: ocfs2: add missing lockres put in dlm_mig_lockres_handler dlm_mig_lockres_handler() is missing a dlm_lockres_put() on an error path. Signed-off-by: joyce Reviewed-by: shencanquan Cc: Mark Fasheh Cc: Joel Becker Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/ocfs2/dlm/dlmrecovery.c b/fs/ocfs2/dlm/dlmrecovery.c index b3fdd1a..e68588e 100644 --- a/fs/ocfs2/dlm/dlmrecovery.c +++ b/fs/ocfs2/dlm/dlmrecovery.c @@ -1408,6 +1408,7 @@ int dlm_mig_lockres_handler(struct o2net_msg *msg, u32 len, void *data, mres->lockname_len, mres->lockname); ret = -EFAULT; spin_unlock(&res->spinlock); + dlm_lockres_put(res); goto leave; } res->state |= DLM_LOCK_RES_MIGRATING; -- cgit v0.10.2 From 30dad30922ccc733cfdbfe232090cf674dc374dc Mon Sep 17 00:00:00 2001 From: Naoya Horiguchi Date: Wed, 12 Jun 2013 14:05:04 -0700 Subject: mm: migration: add migrate_entry_wait_huge() When we have a page fault for the address which is backed by a hugepage under migration, the kernel can't wait correctly and do busy looping on hugepage fault until the migration finishes. As a result, users who try to kick hugepage migration (via soft offlining, for example) occasionally experience long delay or soft lockup. This is because pte_offset_map_lock() can't get a correct migration entry or a correct page table lock for hugepage. This patch introduces migration_entry_wait_huge() to solve this. Signed-off-by: Naoya Horiguchi Reviewed-by: Rik van Riel Reviewed-by: Wanpeng Li Reviewed-by: Michal Hocko Cc: Mel Gorman Cc: Andi Kleen Cc: KOSAKI Motohiro Cc: [2.6.35+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/swapops.h b/include/linux/swapops.h index 47ead51..c5fd30d 100644 --- a/include/linux/swapops.h +++ b/include/linux/swapops.h @@ -137,6 +137,7 @@ static inline void make_migration_entry_read(swp_entry_t *entry) extern void migration_entry_wait(struct mm_struct *mm, pmd_t *pmd, unsigned long address); +extern void migration_entry_wait_huge(struct mm_struct *mm, pte_t *pte); #else #define make_migration_entry(page, write) swp_entry(0, 0) @@ -148,6 +149,8 @@ static inline int is_migration_entry(swp_entry_t swp) static inline void make_migration_entry_read(swp_entry_t *entryp) { } static inline void migration_entry_wait(struct mm_struct *mm, pmd_t *pmd, unsigned long address) { } +static inline void migration_entry_wait_huge(struct mm_struct *mm, + pte_t *pte) { } static inline int is_write_migration_entry(swp_entry_t entry) { return 0; diff --git a/mm/hugetlb.c b/mm/hugetlb.c index f8feeec..e2bfbf7 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -2839,7 +2839,7 @@ int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma, if (ptep) { entry = huge_ptep_get(ptep); if (unlikely(is_hugetlb_entry_migration(entry))) { - migration_entry_wait(mm, (pmd_t *)ptep, address); + migration_entry_wait_huge(mm, ptep); return 0; } else if (unlikely(is_hugetlb_entry_hwpoisoned(entry))) return VM_FAULT_HWPOISON_LARGE | diff --git a/mm/migrate.c b/mm/migrate.c index b1f5750..6f0c244 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -200,15 +200,14 @@ static void remove_migration_ptes(struct page *old, struct page *new) * get to the page and wait until migration is finished. * When we return from this function the fault will be retried. */ -void migration_entry_wait(struct mm_struct *mm, pmd_t *pmd, - unsigned long address) +static void __migration_entry_wait(struct mm_struct *mm, pte_t *ptep, + spinlock_t *ptl) { - pte_t *ptep, pte; - spinlock_t *ptl; + pte_t pte; swp_entry_t entry; struct page *page; - ptep = pte_offset_map_lock(mm, pmd, address, &ptl); + spin_lock(ptl); pte = *ptep; if (!is_swap_pte(pte)) goto out; @@ -236,6 +235,20 @@ out: pte_unmap_unlock(ptep, ptl); } +void migration_entry_wait(struct mm_struct *mm, pmd_t *pmd, + unsigned long address) +{ + spinlock_t *ptl = pte_lockptr(mm, pmd); + pte_t *ptep = pte_offset_map(pmd, address); + __migration_entry_wait(mm, ptep, ptl); +} + +void migration_entry_wait_huge(struct mm_struct *mm, pte_t *pte) +{ + spinlock_t *ptl = &(mm)->page_table_lock; + __migration_entry_wait(mm, pte, ptl); +} + #ifdef CONFIG_BLOCK /* Returns true if all buffers are successfully locked */ static bool buffer_migrate_lock_buffers(struct buffer_head *head, -- cgit v0.10.2 From 736f3203a06eafd0944103775a98584082744c6b Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Wed, 12 Jun 2013 14:05:07 -0700 Subject: kernel/audit_tree.c:audit_add_tree_rule(): protect `rule' from kill_rules() audit_add_tree_rule() must set 'rule->tree = NULL;' firstly, to protect the rule itself freed in kill_rules(). The reason is when it is killed, the 'rule' itself may have already released, we should not access it. one example: we add a rule to an inode, just at the same time the other task is deleting this inode. The work flow for adding a rule: audit_receive() -> (need audit_cmd_mutex lock) audit_receive_skb() -> audit_receive_msg() -> audit_receive_filter() -> audit_add_rule() -> audit_add_tree_rule() -> (need audit_filter_mutex lock) ... unlock audit_filter_mutex get_tree() ... iterate_mounts() -> (iterate all related inodes) tag_mount() -> tag_trunk() -> create_trunk() -> (assume it is 1st rule) fsnotify_add_mark() -> fsnotify_add_inode_mark() -> (add mark to inode->i_fsnotify_marks) ... get_tree(); (each inode will get one) ... lock audit_filter_mutex The work flow for deleting an inode: __destroy_inode() -> fsnotify_inode_delete() -> __fsnotify_inode_delete() -> fsnotify_clear_marks_by_inode() -> (get mark from inode->i_fsnotify_marks) fsnotify_destroy_mark() -> fsnotify_destroy_mark_locked() -> audit_tree_freeing_mark() -> evict_chunk() -> ... tree->goner = 1 ... kill_rules() -> (assume current->audit_context == NULL) call_rcu() -> (rule->tree != NULL) audit_free_rule_rcu() -> audit_free_rule() ... audit_schedule_prune() -> (assume current->audit_context == NULL) kthread_run() -> (need audit_cmd_mutex and audit_filter_mutex lock) prune_one() -> (delete it from prue_list) put_tree(); (match the original get_tree above) Signed-off-by: Chen Gang Cc: Eric Paris Cc: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c index a291aa2..43c307d 100644 --- a/kernel/audit_tree.c +++ b/kernel/audit_tree.c @@ -658,6 +658,7 @@ int audit_add_tree_rule(struct audit_krule *rule) struct vfsmount *mnt; int err; + rule->tree = NULL; list_for_each_entry(tree, &tree_list, list) { if (!strcmp(seed->pathname, tree->pathname)) { put_tree(seed); -- cgit v0.10.2 From 7b57976da48e60b66fdbb9e97f5711b5382a49d7 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Wed, 12 Jun 2013 14:05:08 -0700 Subject: frontswap: fix incorrect zeroing and allocation size for frontswap_map The bitmap accessed by bitops must have enough size to hold the required numbers of bits rounded up to a multiple of BITS_PER_LONG. And the bitmap must not be zeroed by memset() if the number of bits cleared is not a multiple of BITS_PER_LONG. This fixes incorrect zeroing and allocation size for frontswap_map. The incorrect zeroing part doesn't cause any problem because frontswap_map is freed just after zeroing. But the wrongly calculated allocation size may cause the problem. For 32bit systems, the allocation size of frontswap_map is about twice as large as required size. For 64bit systems, the allocation size is smaller than requeired if the number of bits is not a multiple of BITS_PER_LONG. Signed-off-by: Akinobu Mita Cc: Konrad Rzeszutek Wilk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/frontswap.c b/mm/frontswap.c index 538367e..1b24bdc 100644 --- a/mm/frontswap.c +++ b/mm/frontswap.c @@ -319,7 +319,7 @@ void __frontswap_invalidate_area(unsigned type) return; frontswap_ops->invalidate_area(type); atomic_set(&sis->frontswap_pages, 0); - memset(sis->frontswap_map, 0, sis->max / sizeof(long)); + bitmap_zero(sis->frontswap_map, sis->max); } clear_bit(type, need_init); } diff --git a/mm/swapfile.c b/mm/swapfile.c index 6c340d9..746af55b 100644 --- a/mm/swapfile.c +++ b/mm/swapfile.c @@ -2116,7 +2116,7 @@ SYSCALL_DEFINE2(swapon, const char __user *, specialfile, int, swap_flags) } /* frontswap enabled? set up bit-per-page map for frontswap */ if (frontswap_enabled) - frontswap_map = vzalloc(maxpages / sizeof(long)); + frontswap_map = vzalloc(BITS_TO_LONGS(maxpages) * sizeof(long)); if (p->bdev) { if (blk_queue_nonrot(bdev_get_queue(p->bdev))) { -- cgit v0.10.2 From 89dc991f0f5272c307c746fdd57d0bff382b1ba2 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Wed, 12 Jun 2013 14:05:09 -0700 Subject: mm: memcontrol: fix lockless reclaim hierarchy iterator The lockless reclaim hierarchy iterator currently has a misplaced barrier that can lead to use-after-free crashes. The reclaim hierarchy iterator consist of a sequence count and a position pointer that are read and written locklessly, with memory barriers enforcing ordering. The write side sets the position pointer first, then updates the sequence count to "publish" the new position. Likewise, the read side must read the sequence count first, then the position. If the sequence count is up to date, it's guaranteed that the position is up to date as well: writer: reader: iter->position = position if iter->sequence == expected: smp_wmb() smp_rmb() iter->sequence = sequence position = iter->position However, the read side barrier is currently misplaced, which can lead to dereferencing stale position pointers that no longer point to valid memory. Fix this. Signed-off-by: Johannes Weiner Reported-by: Tejun Heo Reviewed-by: Tejun Heo Acked-by: Michal Hocko Cc: KAMEZAWA Hiroyuki Cc: Glauber Costa Cc: [3.10+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 931e38c..1947218 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -1199,7 +1199,6 @@ struct mem_cgroup *mem_cgroup_iter(struct mem_cgroup *root, mz = mem_cgroup_zoneinfo(root, nid, zid); iter = &mz->reclaim_iter[reclaim->priority]; - last_visited = iter->last_visited; if (prev && reclaim->generation != iter->generation) { iter->last_visited = NULL; goto out_unlock; @@ -1218,13 +1217,12 @@ struct mem_cgroup *mem_cgroup_iter(struct mem_cgroup *root, * is alive. */ dead_count = atomic_read(&root->dead_count); - smp_rmb(); - last_visited = iter->last_visited; - if (last_visited) { - if ((dead_count != iter->last_dead_count) || - !css_tryget(&last_visited->css)) { + if (dead_count == iter->last_dead_count) { + smp_rmb(); + last_visited = iter->last_visited; + if (last_visited && + !css_tryget(&last_visited->css)) last_visited = NULL; - } } } -- cgit v0.10.2 From c2853c8df57f49620d26f317d7d43347c29bfc2e Mon Sep 17 00:00:00 2001 From: Alex Shi Date: Wed, 12 Jun 2013 14:05:10 -0700 Subject: include/linux/math64.h: add div64_ul() There is div64_long() to handle the s64/long division, but no mocro do u64/ul division. It is necessary in some scenarios, so add this function. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Alex Shi Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/math64.h b/include/linux/math64.h index b8ba855..2913b86 100644 --- a/include/linux/math64.h +++ b/include/linux/math64.h @@ -6,7 +6,8 @@ #if BITS_PER_LONG == 64 -#define div64_long(x,y) div64_s64((x),(y)) +#define div64_long(x, y) div64_s64((x), (y)) +#define div64_ul(x, y) div64_u64((x), (y)) /** * div_u64_rem - unsigned 64bit divide with 32bit divisor with remainder @@ -47,7 +48,8 @@ static inline s64 div64_s64(s64 dividend, s64 divisor) #elif BITS_PER_LONG == 32 -#define div64_long(x,y) div_s64((x),(y)) +#define div64_long(x, y) div_s64((x), (y)) +#define div64_ul(x, y) div_u64((x), (y)) #ifndef div_u64_rem static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder) -- cgit v0.10.2 From 6b6204ee92adb53bfd6a77cb5679282ec3820c4b Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 9 May 2013 09:48:30 +1000 Subject: md: md_stop_writes() should always freeze recovery. __md_stop_writes() will currently sometimes freeze recovery. So any caller must be ready for that to happen, and indeed they are. However if __md_stop_writes() doesn't freeze_recovery, then a recovery could start before mddev_suspend() is called, which could be awkward. This can particularly cause problems or dm-raid. So change __md_stop_writes() to always freeze recovery. This is safe and more predicatable. Reported-by: Brassow Jonathan Tested-by: Brassow Jonathan Signed-off-by: NeilBrown diff --git a/drivers/md/md.c b/drivers/md/md.c index 4c74424..3e2acfa 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -5277,8 +5277,8 @@ static void md_clean(struct mddev *mddev) static void __md_stop_writes(struct mddev *mddev) { + set_bit(MD_RECOVERY_FROZEN, &mddev->recovery); if (mddev->sync_thread) { - set_bit(MD_RECOVERY_FROZEN, &mddev->recovery); set_bit(MD_RECOVERY_INTR, &mddev->recovery); md_reap_sync_thread(mddev); } -- cgit v0.10.2 From 3056e3aec8d8ba61a0710fb78b2d562600aa2ea7 Mon Sep 17 00:00:00 2001 From: Alex Lyakas Date: Tue, 4 Jun 2013 20:42:21 +0300 Subject: md/raid1: consider WRITE as successful only if at least one non-Faulty and non-rebuilding drive completed it. Without that fix, the following scenario could happen: - RAID1 with drives A and B; drive B was freshly-added and is rebuilding - Drive A fails - WRITE request arrives to the array. It is failed by drive A, so r1_bio is marked as R1BIO_WriteError, but the rebuilding drive B succeeds in writing it, so the same r1_bio is marked as R1BIO_Uptodate. - r1_bio arrives to handle_write_finished, badblocks are disabled, md_error()->error() does nothing because we don't fail the last drive of raid1 - raid_end_bio_io() calls call_bio_endio() - As a result, in call_bio_endio(): if (!test_bit(R1BIO_Uptodate, &r1_bio->state)) clear_bit(BIO_UPTODATE, &bio->bi_flags); this code doesn't clear the BIO_UPTODATE flag, and the whole master WRITE succeeds, back to the upper layer. So we returned success to the upper layer, even though we had written the data onto the rebuilding drive only. But when we want to read the data back, we would not read from the rebuilding drive, so this data is lost. [neilb - applied identical change to raid10 as well] This bug can result in lost data, so it is suitable for any -stable kernel. Cc: stable@vger.kernel.org Signed-off-by: Alex Lyakas Signed-off-by: NeilBrown diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 851023e..f2db7a9 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -427,7 +427,17 @@ static void raid1_end_write_request(struct bio *bio, int error) r1_bio->bios[mirror] = NULL; to_put = bio; - set_bit(R1BIO_Uptodate, &r1_bio->state); + /* + * Do not set R1BIO_Uptodate if the current device is + * rebuilding or Faulty. This is because we cannot use + * such device for properly reading the data back (we could + * potentially use it, if the current write would have felt + * before rdev->recovery_offset, but for simplicity we don't + * check this here. + */ + if (test_bit(In_sync, &conf->mirrors[mirror].rdev->flags) && + !test_bit(Faulty, &conf->mirrors[mirror].rdev->flags)) + set_bit(R1BIO_Uptodate, &r1_bio->state); /* Maybe we can clear some bad blocks. */ if (is_badblock(conf->mirrors[mirror].rdev, diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 018741b..8000ee2 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -490,7 +490,17 @@ static void raid10_end_write_request(struct bio *bio, int error) sector_t first_bad; int bad_sectors; - set_bit(R10BIO_Uptodate, &r10_bio->state); + /* + * Do not set R10BIO_Uptodate if the current device is + * rebuilding or Faulty. This is because we cannot use + * such device for properly reading the data back (we could + * potentially use it, if the current write would have felt + * before rdev->recovery_offset, but for simplicity we don't + * check this here. + */ + if (test_bit(In_sync, &rdev->flags) && + !test_bit(Faulty, &rdev->flags)) + set_bit(R10BIO_Uptodate, &r10_bio->state); /* Maybe we can clear some bad blocks. */ if (is_badblock(rdev, -- cgit v0.10.2 From e2d59925221cd562e07fee38ec8839f7209ae603 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 12 Jun 2013 11:01:22 +1000 Subject: md/raid1,raid10: use freeze_array in place of raise_barrier in various places. Various places in raid1 and raid10 are calling raise_barrier when they really should call freeze_array. The former is only intended to be called from "make_request". The later has extra checks for 'nr_queued' and makes a call to flush_pending_writes(), so it is safe to call it from within the management thread. Using raise_barrier will sometimes deadlock. Using freeze_array should not. As 'freeze_array' currently expects one request to be pending (in handle_read_error - the only previous caller), we need to pass it the number of pending requests (extra) to ignore. The deadlock was made particularly noticeable by commits 050b66152f87c7 (raid10) and 6b740b8d79252f13 (raid1) which appeared in 3.4, so the fix is appropriate for any -stable kernel since then. This patch probably won't apply directly to some early kernels and will need to be applied by hand. Cc: stable@vger.kernel.org Reported-by: Alexander Lyakas Signed-off-by: NeilBrown diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index f2db7a9..5208e9d 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -890,17 +890,17 @@ static void allow_barrier(struct r1conf *conf) wake_up(&conf->wait_barrier); } -static void freeze_array(struct r1conf *conf) +static void freeze_array(struct r1conf *conf, int extra) { /* stop syncio and normal IO and wait for everything to * go quite. * We increment barrier and nr_waiting, and then - * wait until nr_pending match nr_queued+1 + * wait until nr_pending match nr_queued+extra * This is called in the context of one normal IO request * that has failed. Thus any sync request that might be pending * will be blocked by nr_pending, and we need to wait for * pending IO requests to complete or be queued for re-try. - * Thus the number queued (nr_queued) plus this request (1) + * Thus the number queued (nr_queued) plus this request (extra) * must match the number of pending IOs (nr_pending) before * we continue. */ @@ -908,7 +908,7 @@ static void freeze_array(struct r1conf *conf) conf->barrier++; conf->nr_waiting++; wait_event_lock_irq_cmd(conf->wait_barrier, - conf->nr_pending == conf->nr_queued+1, + conf->nr_pending == conf->nr_queued+extra, conf->resync_lock, flush_pending_writes(conf)); spin_unlock_irq(&conf->resync_lock); @@ -1568,8 +1568,8 @@ static int raid1_add_disk(struct mddev *mddev, struct md_rdev *rdev) * we wait for all outstanding requests to complete. */ synchronize_sched(); - raise_barrier(conf); - lower_barrier(conf); + freeze_array(conf, 0); + unfreeze_array(conf); clear_bit(Unmerged, &rdev->flags); } md_integrity_add_rdev(rdev, mddev); @@ -1619,11 +1619,11 @@ static int raid1_remove_disk(struct mddev *mddev, struct md_rdev *rdev) */ struct md_rdev *repl = conf->mirrors[conf->raid_disks + number].rdev; - raise_barrier(conf); + freeze_array(conf, 0); clear_bit(Replacement, &repl->flags); p->rdev = repl; conf->mirrors[conf->raid_disks + number].rdev = NULL; - lower_barrier(conf); + unfreeze_array(conf); clear_bit(WantReplacement, &rdev->flags); } else clear_bit(WantReplacement, &rdev->flags); @@ -2240,7 +2240,7 @@ static void handle_read_error(struct r1conf *conf, struct r1bio *r1_bio) * frozen */ if (mddev->ro == 0) { - freeze_array(conf); + freeze_array(conf, 1); fix_read_error(conf, r1_bio->read_disk, r1_bio->sector, r1_bio->sectors); unfreeze_array(conf); @@ -3020,7 +3020,7 @@ static int raid1_reshape(struct mddev *mddev) return -ENOMEM; } - raise_barrier(conf); + freeze_array(conf, 0); /* ok, everything is stopped */ oldpool = conf->r1bio_pool; @@ -3051,7 +3051,7 @@ static int raid1_reshape(struct mddev *mddev) conf->raid_disks = mddev->raid_disks = raid_disks; mddev->delta_disks = 0; - lower_barrier(conf); + unfreeze_array(conf); set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); md_wakeup_thread(mddev->thread); diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 8000ee2..aa9ed30 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1065,17 +1065,17 @@ static void allow_barrier(struct r10conf *conf) wake_up(&conf->wait_barrier); } -static void freeze_array(struct r10conf *conf) +static void freeze_array(struct r10conf *conf, int extra) { /* stop syncio and normal IO and wait for everything to * go quiet. * We increment barrier and nr_waiting, and then - * wait until nr_pending match nr_queued+1 + * wait until nr_pending match nr_queued+extra * This is called in the context of one normal IO request * that has failed. Thus any sync request that might be pending * will be blocked by nr_pending, and we need to wait for * pending IO requests to complete or be queued for re-try. - * Thus the number queued (nr_queued) plus this request (1) + * Thus the number queued (nr_queued) plus this request (extra) * must match the number of pending IOs (nr_pending) before * we continue. */ @@ -1083,7 +1083,7 @@ static void freeze_array(struct r10conf *conf) conf->barrier++; conf->nr_waiting++; wait_event_lock_irq_cmd(conf->wait_barrier, - conf->nr_pending == conf->nr_queued+1, + conf->nr_pending == conf->nr_queued+extra, conf->resync_lock, flush_pending_writes(conf)); @@ -1849,8 +1849,8 @@ static int raid10_add_disk(struct mddev *mddev, struct md_rdev *rdev) * we wait for all outstanding requests to complete. */ synchronize_sched(); - raise_barrier(conf, 0); - lower_barrier(conf); + freeze_array(conf, 0); + unfreeze_array(conf); clear_bit(Unmerged, &rdev->flags); } md_integrity_add_rdev(rdev, mddev); @@ -2646,7 +2646,7 @@ static void handle_read_error(struct mddev *mddev, struct r10bio *r10_bio) r10_bio->devs[slot].bio = NULL; if (mddev->ro == 0) { - freeze_array(conf); + freeze_array(conf, 1); fix_read_error(conf, mddev, r10_bio); unfreeze_array(conf); } else -- cgit v0.10.2 From 5026d7a9b2f3eb1f9bda66c18ac6bc3036ec9020 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Wed, 12 Jun 2013 07:37:43 -0700 Subject: md/raid1,5,10: Disable WRITE SAME until a recovery strategy is in place There are cases where the kernel will believe that the WRITE SAME command is supported by a block device which does not, in fact, support WRITE SAME. This currently happens for SATA drivers behind a SAS controller, but there are probably a hundred other ways that can happen, including drive firmware bugs. After receiving an error for WRITE SAME the block layer will retry the request as a plain write of zeroes, but mdraid will consider the failure as fatal and consider the drive failed. This has the effect that all the mirrors containing a specific set of data are each offlined in very rapid succession resulting in data loss. However, just bouncing the request back up to the block layer isn't ideal either, because the whole initial request-retry sequence should be inside the write bitmap fence, which probably means that md needs to do its own conversion of WRITE SAME to write zero. Until the failure scenario has been sorted out, disable WRITE SAME for raid1, raid5, and raid10. [neilb: added raid5] This patch is appropriate for any -stable since 3.7 when write_same support was added. Cc: stable@vger.kernel.org Signed-off-by: H. Peter Anvin Signed-off-by: NeilBrown diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 5208e9d..e02ad44 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -2837,8 +2837,8 @@ static int run(struct mddev *mddev) return PTR_ERR(conf); if (mddev->queue) - blk_queue_max_write_same_sectors(mddev->queue, - mddev->chunk_sectors); + blk_queue_max_write_same_sectors(mddev->queue, 0); + rdev_for_each(rdev, mddev) { if (!mddev->gendisk) continue; diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index aa9ed30..06c2cbe 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -3651,8 +3651,7 @@ static int run(struct mddev *mddev) if (mddev->queue) { blk_queue_max_discard_sectors(mddev->queue, mddev->chunk_sectors); - blk_queue_max_write_same_sectors(mddev->queue, - mddev->chunk_sectors); + blk_queue_max_write_same_sectors(mddev->queue, 0); blk_queue_io_min(mddev->queue, chunk_size); if (conf->geo.raid_disks % conf->geo.near_copies) blk_queue_io_opt(mddev->queue, chunk_size * conf->geo.raid_disks); diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 4a7be45..26ee399 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -5465,7 +5465,7 @@ static int run(struct mddev *mddev) if (mddev->major_version == 0 && mddev->minor_version > 90) rdev->recovery_offset = reshape_offset; - + if (rdev->recovery_offset < reshape_offset) { /* We need to check old and new layout */ if (!only_parity(rdev->raid_disk, @@ -5588,6 +5588,8 @@ static int run(struct mddev *mddev) */ mddev->queue->limits.discard_zeroes_data = 0; + blk_queue_max_write_same_sectors(mddev->queue, 0); + rdev_for_each(rdev, mddev) { disk_stack_limits(mddev->gendisk, rdev->bdev, rdev->data_offset << 9); -- cgit v0.10.2 From fe6510b5d6349a8999b83ef7c5671e5a561b803a Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Tue, 11 Jun 2013 22:25:22 +0300 Subject: crypto: aesni_intel - fix accessing of unaligned memory The new XTS code for aesni_intel uses input buffers directly as memory operands for pxor instructions, which causes crash if those buffers are not aligned to 16 bytes. Patch changes XTS code to handle unaligned memory correctly, by loading memory with movdqu instead. Reported-by: Dave Jones Tested-by: Dave Jones Signed-off-by: Jussi Kivilinna Signed-off-by: Herbert Xu diff --git a/arch/x86/crypto/aesni-intel_asm.S b/arch/x86/crypto/aesni-intel_asm.S index 62fe22c..477e9d7 100644 --- a/arch/x86/crypto/aesni-intel_asm.S +++ b/arch/x86/crypto/aesni-intel_asm.S @@ -2681,56 +2681,68 @@ ENTRY(aesni_xts_crypt8) addq %rcx, KEYP movdqa IV, STATE1 - pxor 0x00(INP), STATE1 + movdqu 0x00(INP), INC + pxor INC, STATE1 movdqu IV, 0x00(OUTP) _aesni_gf128mul_x_ble() movdqa IV, STATE2 - pxor 0x10(INP), STATE2 + movdqu 0x10(INP), INC + pxor INC, STATE2 movdqu IV, 0x10(OUTP) _aesni_gf128mul_x_ble() movdqa IV, STATE3 - pxor 0x20(INP), STATE3 + movdqu 0x20(INP), INC + pxor INC, STATE3 movdqu IV, 0x20(OUTP) _aesni_gf128mul_x_ble() movdqa IV, STATE4 - pxor 0x30(INP), STATE4 + movdqu 0x30(INP), INC + pxor INC, STATE4 movdqu IV, 0x30(OUTP) call *%r11 - pxor 0x00(OUTP), STATE1 + movdqu 0x00(OUTP), INC + pxor INC, STATE1 movdqu STATE1, 0x00(OUTP) _aesni_gf128mul_x_ble() movdqa IV, STATE1 - pxor 0x40(INP), STATE1 + movdqu 0x40(INP), INC + pxor INC, STATE1 movdqu IV, 0x40(OUTP) - pxor 0x10(OUTP), STATE2 + movdqu 0x10(OUTP), INC + pxor INC, STATE2 movdqu STATE2, 0x10(OUTP) _aesni_gf128mul_x_ble() movdqa IV, STATE2 - pxor 0x50(INP), STATE2 + movdqu 0x50(INP), INC + pxor INC, STATE2 movdqu IV, 0x50(OUTP) - pxor 0x20(OUTP), STATE3 + movdqu 0x20(OUTP), INC + pxor INC, STATE3 movdqu STATE3, 0x20(OUTP) _aesni_gf128mul_x_ble() movdqa IV, STATE3 - pxor 0x60(INP), STATE3 + movdqu 0x60(INP), INC + pxor INC, STATE3 movdqu IV, 0x60(OUTP) - pxor 0x30(OUTP), STATE4 + movdqu 0x30(OUTP), INC + pxor INC, STATE4 movdqu STATE4, 0x30(OUTP) _aesni_gf128mul_x_ble() movdqa IV, STATE4 - pxor 0x70(INP), STATE4 + movdqu 0x70(INP), INC + pxor INC, STATE4 movdqu IV, 0x70(OUTP) _aesni_gf128mul_x_ble() @@ -2738,16 +2750,20 @@ ENTRY(aesni_xts_crypt8) call *%r11 - pxor 0x40(OUTP), STATE1 + movdqu 0x40(OUTP), INC + pxor INC, STATE1 movdqu STATE1, 0x40(OUTP) - pxor 0x50(OUTP), STATE2 + movdqu 0x50(OUTP), INC + pxor INC, STATE2 movdqu STATE2, 0x50(OUTP) - pxor 0x60(OUTP), STATE3 + movdqu 0x60(OUTP), INC + pxor INC, STATE3 movdqu STATE3, 0x60(OUTP) - pxor 0x70(OUTP), STATE4 + movdqu 0x70(OUTP), INC + pxor INC, STATE4 movdqu STATE4, 0x70(OUTP) ret -- cgit v0.10.2 From 907985f48bc60818e291c631249f9bc84c83a06f Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Mon, 10 Jun 2013 15:18:00 -0400 Subject: slab: prevent warnings when allocating with __GFP_NOWARN Sasha Levin noticed that the warning introduced by commit 6286ae9 ("slab: Return NULL for oversized allocations) is being triggered: WARNING: CPU: 15 PID: 21519 at mm/slab_common.c:376 kmalloc_slab+0x2f/0xb0() can: request_module (can-proto-4) failed. mpoa: proc_mpc_write: could not parse '' Modules linked in: CPU: 15 PID: 21519 Comm: trinity-child15 Tainted: G W 3.10.0-rc4-next-20130607-sasha-00011-gcd78395-dirty #2 0000000000000009 ffff880020a95e30 ffffffff83ff4041 0000000000000000 ffff880020a95e68 ffffffff8111fe12 fffffffffffffff0 00000000000082d0 0000000000080000 0000000000080000 0000000001400000 ffff880020a95e78 Call Trace: [] dump_stack+0x4e/0x82 [] warn_slowpath_common+0x82/0xb0 [] warn_slowpath_null+0x15/0x20 [] kmalloc_slab+0x2f/0xb0 [] __kmalloc+0x24/0x4b0 [] ? security_capable+0x13/0x20 [] ? pipe_fcntl+0x107/0x210 [] pipe_fcntl+0x107/0x210 [] ? fget_raw_light+0x130/0x3f0 [] SyS_fcntl+0x60b/0x6a0 [] tracesys+0xe1/0xe6 Andrew Morton writes: __GFP_NOWARN is frequently used by kernel code to probe for "how big an allocation can I get". That's a bit lame, but it's used on slow paths and is pretty simple. However, SLAB would still spew a warning when a big allocation happens if the __GFP_NOWARN flag is _not_ set to expose kernel bugs. Signed-off-by: Sasha Levin [ penberg@kernel.org: improve changelog ] Signed-off-by: Pekka Enberg diff --git a/mm/slab_common.c b/mm/slab_common.c index ff3218a..2d41450 100644 --- a/mm/slab_common.c +++ b/mm/slab_common.c @@ -373,8 +373,10 @@ struct kmem_cache *kmalloc_slab(size_t size, gfp_t flags) { int index; - if (WARN_ON_ONCE(size > KMALLOC_MAX_SIZE)) + if (size > KMALLOC_MAX_SIZE) { + WARN_ON_ONCE(!(flags & __GFP_NOWARN)); return NULL; + } if (size <= 192) { if (!size) -- cgit v0.10.2 From 99ffc3e74fb0d9d321d2f19c6021e0dbaff2f4b2 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Thu, 13 Jun 2013 10:07:29 +0300 Subject: macvlan: don't touch promisc without passthrough commit df8ef8f3aaa6692970a436204c4429210addb23a "macvlan: add FDB bridge ops and macvlan flags" added a way to control NOPROMISC macvlan flag through netlink. However, with a non passthrough device we never set promisc on open, even if NOPROMISC is off. As a result: If userspace clears NOPROMISC on open, then does not clear it on a netlink command, promisc counter is not decremented on stop and there will be no way to clear it once macvlan is detached. If userspace does not clear NOPROMISC on open, then sets NOPROMISC on a netlink command, promisc counter will be decremented from 0 and overflow to fffffffff with no way to clear promisc. To fix, simply ignore NOPROMISC flag in a netlink command for non-passthrough devices, same as we do at open/close. Since we touch this code anyway - check dev_set_promiscuity return code and pass it to users (though an error here is unlikely). Cc: "David S. Miller" Reviewed-by: John Fastabend Signed-off-by: Michael S. Tsirkin Signed-off-by: David S. Miller diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 1c502bb..6e91931 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -853,18 +853,24 @@ static int macvlan_changelink(struct net_device *dev, struct nlattr *tb[], struct nlattr *data[]) { struct macvlan_dev *vlan = netdev_priv(dev); - if (data && data[IFLA_MACVLAN_MODE]) - vlan->mode = nla_get_u32(data[IFLA_MACVLAN_MODE]); + if (data && data[IFLA_MACVLAN_FLAGS]) { __u16 flags = nla_get_u16(data[IFLA_MACVLAN_FLAGS]); bool promisc = (flags ^ vlan->flags) & MACVLAN_FLAG_NOPROMISC; - - if (promisc && (flags & MACVLAN_FLAG_NOPROMISC)) - dev_set_promiscuity(vlan->lowerdev, -1); - else if (promisc && !(flags & MACVLAN_FLAG_NOPROMISC)) - dev_set_promiscuity(vlan->lowerdev, 1); + if (vlan->port->passthru && promisc) { + int err; + + if (flags & MACVLAN_FLAG_NOPROMISC) + err = dev_set_promiscuity(vlan->lowerdev, -1); + else + err = dev_set_promiscuity(vlan->lowerdev, 1); + if (err < 0) + return err; + } vlan->flags = flags; } + if (data && data[IFLA_MACVLAN_MODE]) + vlan->mode = nla_get_u32(data[IFLA_MACVLAN_MODE]); return 0; } -- cgit v0.10.2 From 94f950c4060cd9b1989c565284beb159b9705a50 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 11 Jun 2013 11:00:34 +0100 Subject: xen-netback: don't de-reference vif pointer after having called xenvif_put() When putting vif-s on the rx notify list, calling xenvif_put() must be deferred until after the removal from the list and the issuing of the notification, as both operations dereference the pointer. Changing this got me to notice that the "irq" variable was effectively unused (and was of too narrow type anyway). Signed-off-by: Jan Beulich Acked-by: Ian Campbell Signed-off-by: David S. Miller diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index 37984e6..8c20935 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -662,7 +662,7 @@ static void xen_netbk_rx_action(struct xen_netbk *netbk) { struct xenvif *vif = NULL, *tmp; s8 status; - u16 irq, flags; + u16 flags; struct xen_netif_rx_response *resp; struct sk_buff_head rxq; struct sk_buff *skb; @@ -771,13 +771,13 @@ static void xen_netbk_rx_action(struct xen_netbk *netbk) sco->meta_slots_used); RING_PUSH_RESPONSES_AND_CHECK_NOTIFY(&vif->rx, ret); - irq = vif->irq; - if (ret && list_empty(&vif->notify_list)) - list_add_tail(&vif->notify_list, ¬ify); xenvif_notify_tx_completion(vif); - xenvif_put(vif); + if (ret && list_empty(&vif->notify_list)) + list_add_tail(&vif->notify_list, ¬ify); + else + xenvif_put(vif); npo.meta_cons += sco->meta_slots_used; dev_kfree_skb(skb); } @@ -785,6 +785,7 @@ static void xen_netbk_rx_action(struct xen_netbk *netbk) list_for_each_entry_safe(vif, tmp, ¬ify, notify_list) { notify_remote_via_irq(vif->irq); list_del_init(&vif->notify_list); + xenvif_put(vif); } /* More work to do? */ -- cgit v0.10.2 From 0c5fed09ab0feedd43c362b1c7fff67fdbf9548f Mon Sep 17 00:00:00 2001 From: Somnath Kotur Date: Tue, 11 Jun 2013 17:18:22 +0530 Subject: be2net: Fix 32-bit DMA Mask handling Fix to set the coherent DMA mask only if dma_set_mask() succeeded, and to error out if either fails. Signed-off-by: Somnath Kotur Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 8bc1b21..a0b4be5 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -4262,6 +4262,9 @@ static int be_probe(struct pci_dev *pdev, const struct pci_device_id *pdev_id) netdev->features |= NETIF_F_HIGHDMA; } else { status = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (!status) + status = dma_set_coherent_mask(&pdev->dev, + DMA_BIT_MASK(32)); if (status) { dev_err(&pdev->dev, "Could not set PCI DMA Mask\n"); goto free_netdev; -- cgit v0.10.2 From 631f24a2febb228f82604dc5330091e8080cd8ae Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Wed, 12 Jun 2013 11:05:03 -0500 Subject: net: ethernet: stmicro: stmmac: Fix compile error when STMMAC_XMIT_DEBUG used drivers/net/ethernet/stmicro/stmmac/stmmac_main.c: In function: stmmac_xmit drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1902:74: error: expected ) before __func__ Signed-off-by: Dinh Nguyen Cc: Giuseppe Cavallaro CC: David S. Miller Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 618446a..ee919ca 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1899,7 +1899,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) #ifdef STMMAC_XMIT_DEBUG if (netif_msg_pktdata(priv)) { - pr_info("%s: curr %d dirty=%d entry=%d, first=%p, nfrags=%d" + pr_info("%s: curr %d dirty=%d entry=%d, first=%p, nfrags=%d", __func__, (priv->cur_tx % txsize), (priv->dirty_tx % txsize), entry, first, nfrags); if (priv->extend_desc) -- cgit v0.10.2 From 2dc85bf323515e59e15dfa858d1472bb25cad0fe Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Wed, 12 Jun 2013 16:02:27 +0200 Subject: packet: packet_getname_spkt: make sure string is always 0-terminated uaddr->sa_data is exactly of size 14, which is hard-coded here and passed as a size argument to strncpy(). A device name can be of size IFNAMSIZ (== 16), meaning we might leave the destination string unterminated. Thus, use strlcpy() and also sizeof() while we're at it. We need to memset the data area beforehand, since strlcpy does not padd the remaining buffer with zeroes for user space, so that we do not possibly leak anything. Signed-off-by: Daniel Borkmann Signed-off-by: David S. Miller diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index 8ec1bca..20a1bd0 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -2851,12 +2851,11 @@ static int packet_getname_spkt(struct socket *sock, struct sockaddr *uaddr, return -EOPNOTSUPP; uaddr->sa_family = AF_PACKET; + memset(uaddr->sa_data, 0, sizeof(uaddr->sa_data)); rcu_read_lock(); dev = dev_get_by_index_rcu(sock_net(sk), pkt_sk(sk)->ifindex); if (dev) - strncpy(uaddr->sa_data, dev->name, 14); - else - memset(uaddr->sa_data, 0, 14); + strlcpy(uaddr->sa_data, dev->name, sizeof(uaddr->sa_data)); rcu_read_unlock(); *uaddr_len = sizeof(*uaddr); -- cgit v0.10.2 From b8fad459f9cc8417b74f71c6c229eef7412163d1 Mon Sep 17 00:00:00 2001 From: Nikolay Aleksandrov Date: Wed, 12 Jun 2013 00:07:01 +0200 Subject: bonding: reset master mac on first enslave failure If the bond device is supposed to get the first slave's MAC address and the first enslavement fails then we need to reset the master's MAC otherwise it will stay the same as the failed slave device. We do it after err_undo_flags since that is the first place where the MAC can be changed and we check if it should've been the first slave and if the bond's MAC was set to it because that err place is used by multiple locations prior to changing the master's MAC address. Signed-off-by: Nikolay Aleksandrov Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 29b846c..473633a 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1957,6 +1957,10 @@ err_free: err_undo_flags: bond_compute_features(bond); + /* Enslave of first slave has failed and we need to fix master's mac */ + if (bond->slave_cnt == 0 && + ether_addr_equal(bond_dev->dev_addr, slave_dev->dev_addr)) + eth_hw_addr_random(bond_dev); return res; } -- cgit v0.10.2 From 4f5474e7fd68988cb11373fc698bf10b35b49e31 Mon Sep 17 00:00:00 2001 From: Nikolay Aleksandrov Date: Wed, 12 Jun 2013 00:07:02 +0200 Subject: bonding: fix igmp_retrans type and two related races First the type of igmp_retrans (which is the actual counter of igmp_resend parameter) is changed to u8 to be able to store values up to 255 (as per documentation). There are two races that were hidden there and which are easy to trigger after the previous fix, the first is between bond_resend_igmp_join_requests and bond_change_active_slave where igmp_retrans is set and can be altered by the periodic. The second race condition is between multiple running instances of the periodic (upon execution it can be scheduled again for immediate execution which can cause the counter to go < 0 which in the unsigned case leads to unnecessary igmp retransmissions). Since in bond_change_active_slave bond->lock is held for reading and curr_slave_lock for writing, we use curr_slave_lock for mutual exclusion. We can't drop them as there're cases where RTNL is not held when bond_change_active_slave is called. RCU is unlocked in bond_resend_igmp_join_requests before getting curr_slave_lock since we don't need it there and it's pointless to delay. The decrement is moved inside the "if" block because if we decrement unconditionally there's still a possibility for a race condition although it is much more difficult to hit (many changes have to happen in a very short period in order to trigger) which in the case of 3 parallel running instances of this function and igmp_retrans == 1 (with check bond->igmp_retrans-- > 1) is: f1 passes, doesn't re-schedule, but decrements - igmp_retrans = 0 f2 then passes, doesn't re-schedule, but decrements - igmp_retrans = 255 f3 does the unnecessary retransmissions. Signed-off-by: Nikolay Aleksandrov Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 473633a..02d9ae7 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -764,8 +764,8 @@ static void bond_resend_igmp_join_requests(struct bonding *bond) struct net_device *bond_dev, *vlan_dev, *upper_dev; struct vlan_entry *vlan; - rcu_read_lock(); read_lock(&bond->lock); + rcu_read_lock(); bond_dev = bond->dev; @@ -787,12 +787,19 @@ static void bond_resend_igmp_join_requests(struct bonding *bond) if (vlan_dev) __bond_resend_igmp_join_requests(vlan_dev); } + rcu_read_unlock(); - if (--bond->igmp_retrans > 0) + /* We use curr_slave_lock to protect against concurrent access to + * igmp_retrans from multiple running instances of this function and + * bond_change_active_slave + */ + write_lock_bh(&bond->curr_slave_lock); + if (bond->igmp_retrans > 1) { + bond->igmp_retrans--; queue_delayed_work(bond->wq, &bond->mcast_work, HZ/5); - + } + write_unlock_bh(&bond->curr_slave_lock); read_unlock(&bond->lock); - rcu_read_unlock(); } static void bond_resend_igmp_join_requests_delayed(struct work_struct *work) diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h index 2baec24..f989e15 100644 --- a/drivers/net/bonding/bonding.h +++ b/drivers/net/bonding/bonding.h @@ -225,7 +225,7 @@ struct bonding { rwlock_t curr_slave_lock; u8 send_peer_notif; s8 setup_by_slave; - s8 igmp_retrans; + u8 igmp_retrans; #ifdef CONFIG_PROC_FS struct proc_dir_entry *proc_entry; char proc_file_name[IFNAMSIZ]; -- cgit v0.10.2 From 55b92b7a11690bc377b5d373872a6b650ae88e64 Mon Sep 17 00:00:00 2001 From: Guillaume Nault Date: Wed, 12 Jun 2013 16:07:23 +0200 Subject: l2tp: Fix PPP header erasure and memory leak Copy user data after PPP framing header. This prevents erasure of the added PPP header and avoids leaking two bytes of uninitialised memory at the end of skb's data buffer. Signed-off-by: Guillaume Nault Signed-off-by: David S. Miller diff --git a/net/l2tp/l2tp_ppp.c b/net/l2tp/l2tp_ppp.c index 637a341..681c626 100644 --- a/net/l2tp/l2tp_ppp.c +++ b/net/l2tp/l2tp_ppp.c @@ -346,12 +346,12 @@ static int pppol2tp_sendmsg(struct kiocb *iocb, struct socket *sock, struct msgh skb_put(skb, 2); /* Copy user data into skb */ - error = memcpy_fromiovec(skb->data, m->msg_iov, total_len); + error = memcpy_fromiovec(skb_put(skb, total_len), m->msg_iov, + total_len); if (error < 0) { kfree_skb(skb); goto error_put_sess_tun; } - skb_put(skb, total_len); l2tp_xmit_skb(session, skb, session->hdr_len); -- cgit v0.10.2 From a6f79d0f26704214b5b702bbac525cb72997f984 Mon Sep 17 00:00:00 2001 From: Guillaume Nault Date: Wed, 12 Jun 2013 16:07:36 +0200 Subject: l2tp: Fix sendmsg() return value PPPoL2TP sockets should comply with the standard send*() return values (i.e. return number of bytes sent instead of 0 upon success). Signed-off-by: Guillaume Nault Signed-off-by: David S. Miller diff --git a/net/l2tp/l2tp_ppp.c b/net/l2tp/l2tp_ppp.c index 681c626..8dec687 100644 --- a/net/l2tp/l2tp_ppp.c +++ b/net/l2tp/l2tp_ppp.c @@ -358,7 +358,7 @@ static int pppol2tp_sendmsg(struct kiocb *iocb, struct socket *sock, struct msgh sock_put(ps->tunnel_sock); sock_put(sk); - return error; + return total_len; error_put_sess_tun: sock_put(ps->tunnel_sock); -- cgit v0.10.2 From df465abfe06f7dc4f33f4a96d17f096e9e8ac917 Mon Sep 17 00:00:00 2001 From: Nithin Sujir Date: Wed, 12 Jun 2013 11:08:59 -0700 Subject: tg3: Wait for boot code to finish after power on Some systems that don't need wake-on-lan may choose to power down the chip on system standby. Upon resume, the power on causes the boot code to startup and initialize the hardware. On one new platform, this is causing the device to go into a bad state due to a race between the driver and boot code, once every several hundred resumes. The same race exists on open since we come up from a power on. This patch adds a wait for boot code signature at the beginning of tg3_init_hw() which is common to both cases. If there has not been a power-off or the boot code has already completed, the signature will be present and poll_fw() returns immediately. Also return immediately if the device does not have firmware. Cc: stable@vger.kernel.org Signed-off-by: Nithin Nayak Sujir Signed-off-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 0f493c8..c777b90 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -1800,6 +1800,9 @@ static int tg3_poll_fw(struct tg3 *tp) int i; u32 val; + if (tg3_flag(tp, NO_FWARE_REPORTED)) + return 0; + if (tg3_flag(tp, IS_SSB_CORE)) { /* We don't use firmware. */ return 0; @@ -10404,6 +10407,13 @@ static int tg3_reset_hw(struct tg3 *tp, bool reset_phy) */ static int tg3_init_hw(struct tg3 *tp, bool reset_phy) { + /* Chip may have been just powered on. If so, the boot code may still + * be running initialization. Wait for it to finish to avoid races in + * accessing the hardware. + */ + tg3_enable_register_access(tp); + tg3_poll_fw(tp); + tg3_switch_clocks(tp); tw32(TG3PCI_MEM_WIN_BASE_ADDR, 0); -- cgit v0.10.2 From baafc77b32f647daa7c45825f7af8cdd55d00817 Mon Sep 17 00:00:00 2001 From: Saurabh Mohan Date: Mon, 10 Jun 2013 17:45:10 -0700 Subject: net/ipv4: ip_vti clear skb cb before tunneling. If users apply shaper to vti tunnel then it will cause a kernel crash. The problem seems to be due to the vti_tunnel_xmit function not clearing skb->opt field before passing the packet to xfrm tunneling code. Signed-off-by: Saurabh Mohan Acked-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/net/ipv4/ip_vti.c b/net/ipv4/ip_vti.c index 9d2bdb2..c118f6b 100644 --- a/net/ipv4/ip_vti.c +++ b/net/ipv4/ip_vti.c @@ -361,8 +361,7 @@ static netdev_tx_t vti_tunnel_xmit(struct sk_buff *skb, struct net_device *dev) tunnel->err_count = 0; } - IPCB(skb)->flags &= ~(IPSKB_XFRM_TUNNEL_SIZE | IPSKB_XFRM_TRANSFORMED | - IPSKB_REROUTED); + memset(IPCB(skb), 0, sizeof(*IPCB(skb))); skb_dst_drop(skb); skb_dst_set(skb, &rt->dst); nf_reset(skb); -- cgit v0.10.2 From 5033ec3e3f923a371c28f0c3df45905a9dd9c457 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Tue, 11 Jun 2013 15:32:04 +0530 Subject: drivers: net: davinci_mdio: moving mdio resume earlier than cpsw ethernet driver MDIO driver should resume before CPSW ethernet driver so that CPSW connect to the phy and start tx/rx ethernet packets, changing the suspend/resume apis with suspend_late/resume_early. Signed-off-by: Mugunthan V N Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c index b2275d1..74e56b3 100644 --- a/drivers/net/ethernet/ti/davinci_mdio.c +++ b/drivers/net/ethernet/ti/davinci_mdio.c @@ -476,8 +476,8 @@ static int davinci_mdio_resume(struct device *dev) } static const struct dev_pm_ops davinci_mdio_pm_ops = { - .suspend = davinci_mdio_suspend, - .resume = davinci_mdio_resume, + .suspend_late = davinci_mdio_suspend, + .resume_early = davinci_mdio_resume, }; static const struct of_device_id davinci_mdio_of_mtable[] = { -- cgit v0.10.2 From cc60ab0a8b5b62ea6b5cc1c6397adb5b4bd41271 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Tue, 11 Jun 2013 15:32:05 +0530 Subject: drivers: net: davinci_mdio: restore mdio clk divider in mdio resume During suspend resume cycle all the register data is lost, so MDIO clock divier value gets reset. This patch restores the clock divider value. Signed-off-by: Mugunthan V N Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c index 74e56b3..c47f0db 100644 --- a/drivers/net/ethernet/ti/davinci_mdio.c +++ b/drivers/net/ethernet/ti/davinci_mdio.c @@ -459,15 +459,12 @@ static int davinci_mdio_suspend(struct device *dev) static int davinci_mdio_resume(struct device *dev) { struct davinci_mdio_data *data = dev_get_drvdata(dev); - u32 ctrl; pm_runtime_get_sync(data->dev); spin_lock(&data->lock); /* restart the scan state machine */ - ctrl = __raw_readl(&data->regs->control); - ctrl |= CONTROL_ENABLE; - __raw_writel(ctrl, &data->regs->control); + __davinci_mdio_reset(data); data->suspended = false; spin_unlock(&data->lock); -- cgit v0.10.2 From d3b6f6141831b6e2d414edea6cc7af5b9bc6fac2 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 7 Jun 2013 13:26:05 -0700 Subject: ip_tunnel: remove __net_init/exit from exported functions If CONFIG_NET_NS is not set then __net_init is the same as __init and __net_exit is the same as __exit. These functions will be removed from memory after the module loads or is removed. Functions that are exported for use by other functions should never be labeled for removal. Bug introduced by commit c54419321455631079c ("GRE: Refactor GRE tunneling code.") Reported-by: Steinar H. Gunderson Signed-off-by: Steven Rostedt Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/include/net/ip_tunnels.h b/include/net/ip_tunnels.h index 4b6f0b2..09b1360 100644 --- a/include/net/ip_tunnels.h +++ b/include/net/ip_tunnels.h @@ -95,10 +95,10 @@ struct ip_tunnel_net { int ip_tunnel_init(struct net_device *dev); void ip_tunnel_uninit(struct net_device *dev); void ip_tunnel_dellink(struct net_device *dev, struct list_head *head); -int __net_init ip_tunnel_init_net(struct net *net, int ip_tnl_net_id, - struct rtnl_link_ops *ops, char *devname); +int ip_tunnel_init_net(struct net *net, int ip_tnl_net_id, + struct rtnl_link_ops *ops, char *devname); -void __net_exit ip_tunnel_delete_net(struct ip_tunnel_net *itn); +void ip_tunnel_delete_net(struct ip_tunnel_net *itn); void ip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev, const struct iphdr *tnl_params); diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c index be2f8da..7fa8f08 100644 --- a/net/ipv4/ip_tunnel.c +++ b/net/ipv4/ip_tunnel.c @@ -853,7 +853,7 @@ void ip_tunnel_dellink(struct net_device *dev, struct list_head *head) } EXPORT_SYMBOL_GPL(ip_tunnel_dellink); -int __net_init ip_tunnel_init_net(struct net *net, int ip_tnl_net_id, +int ip_tunnel_init_net(struct net *net, int ip_tnl_net_id, struct rtnl_link_ops *ops, char *devname) { struct ip_tunnel_net *itn = net_generic(net, ip_tnl_net_id); @@ -899,7 +899,7 @@ static void ip_tunnel_destroy(struct ip_tunnel_net *itn, struct list_head *head) unregister_netdevice_queue(itn->fb_tunnel_dev, head); } -void __net_exit ip_tunnel_delete_net(struct ip_tunnel_net *itn) +void ip_tunnel_delete_net(struct ip_tunnel_net *itn) { LIST_HEAD(list); -- cgit v0.10.2 From dd019897358b815f7828dab90b51d51df4d3658d Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Thu, 13 Jun 2013 10:15:45 +0900 Subject: net: sh_eth: fix incorrect RX length error if R8A7740 This patch fixes an issue that the driver increments the "RX length error" on every buffer in sh_eth_rx() if the R8A7740. This patch also adds a description about the Receive Frame Status bits. Signed-off-by: Yoshihiro Shimoda Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index b4479b5..5e3982f 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -1401,16 +1401,23 @@ static int sh_eth_rx(struct net_device *ndev, u32 intr_status) desc_status = edmac_to_cpu(mdp, rxdesc->status); pkt_len = rxdesc->frame_length; -#if defined(CONFIG_ARCH_R8A7740) - desc_status >>= 16; -#endif - if (--boguscnt < 0) break; if (!(desc_status & RDFEND)) ndev->stats.rx_length_errors++; +#if defined(CONFIG_ARCH_R8A7740) + /* + * In case of almost all GETHER/ETHERs, the Receive Frame State + * (RFS) bits in the Receive Descriptor 0 are from bit 9 to + * bit 0. However, in case of the R8A7740's GETHER, the RFS + * bits are from bit 25 to bit 16. So, the driver needs right + * shifting by 16. + */ + desc_status >>= 16; +#endif + if (desc_status & (RD_RFS1 | RD_RFS2 | RD_RFS3 | RD_RFS4 | RD_RFS5 | RD_RFS6 | RD_RFS10)) { ndev->stats.rx_errors++; -- cgit v0.10.2 From 3a96d5cd7bdce45d5dded75c3a62d4fb98050280 Mon Sep 17 00:00:00 2001 From: Josh Durgin Date: Wed, 12 Jun 2013 19:15:06 -0700 Subject: rbd: use the correct length for format 2 object names Format 2 objects use 16 characters for the object name suffix to be able to express the full 64-bit range of object numbers. Format 1 images only use 12 characters for this. Using 12-character names for format 2 caused userspace and kernel rbd clients to read differently named objects, which made an image written by one client look empty to the other client. CC: stable@vger.kernel.org # 3.9+ Reported-by: Chris Dunlop Signed-off-by: Josh Durgin Reviewed-by: Sage Weil diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 3a897a5..cc7c60e 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -1038,12 +1038,16 @@ static const char *rbd_segment_name(struct rbd_device *rbd_dev, u64 offset) char *name; u64 segment; int ret; + char *name_format; name = kmem_cache_alloc(rbd_segment_name_cache, GFP_NOIO); if (!name) return NULL; segment = offset >> rbd_dev->header.obj_order; - ret = snprintf(name, MAX_OBJ_NAME_SIZE + 1, "%s.%012llx", + name_format = "%s.%012llx"; + if (rbd_dev->image_format == 2) + name_format = "%s.%016llx"; + ret = snprintf(name, MAX_OBJ_NAME_SIZE + 1, name_format, rbd_dev->header.object_prefix, segment); if (ret < 0 || ret > MAX_OBJ_NAME_SIZE) { pr_err("error formatting segment name for #%llu (%d)\n", -- cgit v0.10.2 From b844db31874e3b1c3b86c65024ac7bed9f77ee42 Mon Sep 17 00:00:00 2001 From: Josh Triplett Date: Wed, 12 Jun 2013 17:26:37 -0700 Subject: turbostat: Increase output buffer size to accommodate C8-C10 On platforms with C8-C10 support, the additional C-states cause turbostat to overrun its output buffer of 128 bytes per CPU. Increase this to 256 bytes per CPU. [ As a bugfix, this should go into 3.10; however, since the C8-C10 support didn't go in until after 3.9, this need not go into any stable kernel. ] Signed-off-by: Josh Triplett Cc: Len Brown Cc: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 9e9d348..fe70207 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -2191,7 +2191,7 @@ int initialize_counters(int cpu_id) void allocate_output_buffer() { - output_buffer = calloc(1, (1 + topo.num_cpus) * 128); + output_buffer = calloc(1, (1 + topo.num_cpus) * 256); outp = output_buffer; if (outp == NULL) { perror("calloc"); -- cgit v0.10.2 From b0a4d8b3cf199e7277f659663ac3a3580e9967bb Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Fri, 31 May 2013 11:14:20 +0100 Subject: kbuild: make sure we clean up DTB temporary files Various temporary files used when building DTB files were not suffixed with .tmp and therefore were not cleaned up by "make clean". Signed-off-by: Ian Campbell Reviewed-by: Stephen Warren Tested-by: Stephen Warren Signed-off-by: Grant Likely diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 8337663..f97869f 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -149,7 +149,7 @@ cpp_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \ ld_flags = $(LDFLAGS) $(ldflags-y) -dtc_cpp_flags = -Wp,-MD,$(depfile).pre -nostdinc \ +dtc_cpp_flags = -Wp,-MD,$(depfile).pre.tmp -nostdinc \ -I$(srctree)/arch/$(SRCARCH)/boot/dts \ -I$(srctree)/arch/$(SRCARCH)/boot/dts/include \ -undef -D__DTS__ @@ -265,13 +265,13 @@ quiet_cmd_dtc = DTC $@ cmd_dtc = $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \ $(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 \ -i $(dir $<) $(DTC_FLAGS) \ - -d $(depfile).dtc $(dtc-tmp) ; \ - cat $(depfile).pre $(depfile).dtc > $(depfile) + -d $(depfile).dtc.tmp $(dtc-tmp) ; \ + cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile) $(obj)/%.dtb: $(src)/%.dts FORCE $(call if_changed_dep,dtc) -dtc-tmp = $(subst $(comma),_,$(dot-target).dts) +dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp) # Bzip2 # --------------------------------------------------------------------------- -- cgit v0.10.2 From d25d86949b6799c35d78f4910498c2b65a3f0841 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 12 Jun 2013 15:39:04 +1000 Subject: of: Fix locking vs. interrupts The OF code uses irqsafe locks everywhere except in a handful of functions for no obvious reasons. Since the conversion from the old rwlocks, this now triggers lockdep warnings when used at interrupt time. At least one driver (ibmvscsi) seems to be doing that from softirq context. This converts the few non-irqsafe locks into irqsafe ones, making them consistent with the rest of the code. Signed-off-by: Benjamin Herrenschmidt Acked-by: Thomas Gleixner Acked-by: David S. Miller Signed-off-by: Grant Likely diff --git a/arch/sparc/kernel/prom_common.c b/arch/sparc/kernel/prom_common.c index 9f20566..79cc0d1 100644 --- a/arch/sparc/kernel/prom_common.c +++ b/arch/sparc/kernel/prom_common.c @@ -54,6 +54,7 @@ EXPORT_SYMBOL(of_set_property_mutex); int of_set_property(struct device_node *dp, const char *name, void *val, int len) { struct property **prevp; + unsigned long flags; void *new_val; int err; @@ -64,7 +65,7 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len err = -ENODEV; mutex_lock(&of_set_property_mutex); - raw_spin_lock(&devtree_lock); + raw_spin_lock_irqsave(&devtree_lock, flags); prevp = &dp->properties; while (*prevp) { struct property *prop = *prevp; @@ -91,7 +92,7 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len } prevp = &(*prevp)->next; } - raw_spin_unlock(&devtree_lock); + raw_spin_unlock_irqrestore(&devtree_lock, flags); mutex_unlock(&of_set_property_mutex); /* XXX Upate procfs if necessary... */ diff --git a/drivers/of/base.c b/drivers/of/base.c index f53b992..a6f584a 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -192,14 +192,15 @@ EXPORT_SYMBOL(of_find_property); struct device_node *of_find_all_nodes(struct device_node *prev) { struct device_node *np; + unsigned long flags; - raw_spin_lock(&devtree_lock); + raw_spin_lock_irqsave(&devtree_lock, flags); np = prev ? prev->allnext : of_allnodes; for (; np != NULL; np = np->allnext) if (of_node_get(np)) break; of_node_put(prev); - raw_spin_unlock(&devtree_lock); + raw_spin_unlock_irqrestore(&devtree_lock, flags); return np; } EXPORT_SYMBOL(of_find_all_nodes); @@ -421,8 +422,9 @@ struct device_node *of_get_next_available_child(const struct device_node *node, struct device_node *prev) { struct device_node *next; + unsigned long flags; - raw_spin_lock(&devtree_lock); + raw_spin_lock_irqsave(&devtree_lock, flags); next = prev ? prev->sibling : node->child; for (; next; next = next->sibling) { if (!__of_device_is_available(next)) @@ -431,7 +433,7 @@ struct device_node *of_get_next_available_child(const struct device_node *node, break; } of_node_put(prev); - raw_spin_unlock(&devtree_lock); + raw_spin_unlock_irqrestore(&devtree_lock, flags); return next; } EXPORT_SYMBOL(of_get_next_available_child); @@ -735,13 +737,14 @@ EXPORT_SYMBOL_GPL(of_modalias_node); struct device_node *of_find_node_by_phandle(phandle handle) { struct device_node *np; + unsigned long flags; - raw_spin_lock(&devtree_lock); + raw_spin_lock_irqsave(&devtree_lock, flags); for (np = of_allnodes; np; np = np->allnext) if (np->phandle == handle) break; of_node_get(np); - raw_spin_unlock(&devtree_lock); + raw_spin_unlock_irqrestore(&devtree_lock, flags); return np; } EXPORT_SYMBOL(of_find_node_by_phandle); -- cgit v0.10.2 From 2a6a08ca5e3561e17346f8f87ce8dc88c0a8e42d Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 13 Jun 2013 13:00:43 +0100 Subject: dtc: Update generated files to output from Bison 2.5 This patch merely updates the generated dtc parser and lexer files to the output generated by Bison 2.5. The previous versions were generated from version 2.4.1. The only reason for this commit is to minimize the diff on the next commit which fixes a bug in the DTC #line directive parsing. Otherwise the Bison changes would be intermingled with the functional changes. Signed-off-by: Grant Likely diff --git a/scripts/dtc/dtc-parser.tab.c_shipped b/scripts/dtc/dtc-parser.tab.c_shipped index 4af5590..ee1d8c3 100644 --- a/scripts/dtc/dtc-parser.tab.c_shipped +++ b/scripts/dtc/dtc-parser.tab.c_shipped @@ -1,10 +1,8 @@ +/* A Bison parser, made by GNU Bison 2.5. */ -/* A Bison parser, made by GNU Bison 2.4.1. */ - -/* Skeleton implementation for Bison's Yacc-like parsers in C +/* Bison implementation for Yacc-like parsers in C - Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 - Free Software Foundation, Inc. + Copyright (C) 1984, 1989-1990, 2000-2011 Free Software Foundation, Inc. This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -46,7 +44,7 @@ #define YYBISON 1 /* Bison version. */ -#define YYBISON_VERSION "2.4.1" +#define YYBISON_VERSION "2.5" /* Skeleton name. */ #define YYSKELETON_NAME "yacc.c" @@ -67,7 +65,7 @@ /* Copy the first part of user declarations. */ -/* Line 189 of yacc.c */ +/* Line 268 of yacc.c */ #line 21 "dtc-parser.y" #include @@ -88,8 +86,8 @@ static unsigned long long eval_literal(const char *s, int base, int bits); static unsigned char eval_char_literal(const char *s); -/* Line 189 of yacc.c */ -#line 93 "dtc-parser.tab.c" +/* Line 268 of yacc.c */ +#line 91 "dtc-parser.tab.c" /* Enabling traces. */ #ifndef YYDEBUG @@ -147,7 +145,7 @@ static unsigned char eval_char_literal(const char *s); typedef union YYSTYPE { -/* Line 214 of yacc.c */ +/* Line 293 of yacc.c */ #line 40 "dtc-parser.y" char *propnodename; @@ -171,8 +169,8 @@ typedef union YYSTYPE -/* Line 214 of yacc.c */ -#line 176 "dtc-parser.tab.c" +/* Line 293 of yacc.c */ +#line 174 "dtc-parser.tab.c" } YYSTYPE; # define YYSTYPE_IS_TRIVIAL 1 # define yystype YYSTYPE /* obsolescent; will be withdrawn */ @@ -183,8 +181,8 @@ typedef union YYSTYPE /* Copy the second part of user declarations. */ -/* Line 264 of yacc.c */ -#line 188 "dtc-parser.tab.c" +/* Line 343 of yacc.c */ +#line 186 "dtc-parser.tab.c" #ifdef short # undef short @@ -234,7 +232,7 @@ typedef short int yytype_int16; #define YYSIZE_MAXIMUM ((YYSIZE_T) -1) #ifndef YY_ -# if YYENABLE_NLS +# if defined YYENABLE_NLS && YYENABLE_NLS # if ENABLE_NLS # include /* INFRINGES ON USER NAME SPACE */ # define YY_(msgid) dgettext ("bison-runtime", msgid) @@ -287,11 +285,11 @@ YYID (yyi) # define alloca _alloca # else # define YYSTACK_ALLOC alloca -# if ! defined _ALLOCA_H && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ +# if ! defined _ALLOCA_H && ! defined EXIT_SUCCESS && (defined __STDC__ || defined __C99__FUNC__ \ || defined __cplusplus || defined _MSC_VER) # include /* INFRINGES ON USER NAME SPACE */ -# ifndef _STDLIB_H -# define _STDLIB_H 1 +# ifndef EXIT_SUCCESS +# define EXIT_SUCCESS 0 # endif # endif # endif @@ -314,24 +312,24 @@ YYID (yyi) # ifndef YYSTACK_ALLOC_MAXIMUM # define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM # endif -# if (defined __cplusplus && ! defined _STDLIB_H \ +# if (defined __cplusplus && ! defined EXIT_SUCCESS \ && ! ((defined YYMALLOC || defined malloc) \ && (defined YYFREE || defined free))) # include /* INFRINGES ON USER NAME SPACE */ -# ifndef _STDLIB_H -# define _STDLIB_H 1 +# ifndef EXIT_SUCCESS +# define EXIT_SUCCESS 0 # endif # endif # ifndef YYMALLOC # define YYMALLOC malloc -# if ! defined malloc && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ +# if ! defined malloc && ! defined EXIT_SUCCESS && (defined __STDC__ || defined __C99__FUNC__ \ || defined __cplusplus || defined _MSC_VER) void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */ # endif # endif # ifndef YYFREE # define YYFREE free -# if ! defined free && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ +# if ! defined free && ! defined EXIT_SUCCESS && (defined __STDC__ || defined __C99__FUNC__ \ || defined __cplusplus || defined _MSC_VER) void free (void *); /* INFRINGES ON USER NAME SPACE */ # endif @@ -360,23 +358,7 @@ union yyalloc ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE)) \ + YYSTACK_GAP_MAXIMUM) -/* Copy COUNT objects from FROM to TO. The source and destination do - not overlap. */ -# ifndef YYCOPY -# if defined __GNUC__ && 1 < __GNUC__ -# define YYCOPY(To, From, Count) \ - __builtin_memcpy (To, From, (Count) * sizeof (*(From))) -# else -# define YYCOPY(To, From, Count) \ - do \ - { \ - YYSIZE_T yyi; \ - for (yyi = 0; yyi < (Count); yyi++) \ - (To)[yyi] = (From)[yyi]; \ - } \ - while (YYID (0)) -# endif -# endif +# define YYCOPY_NEEDED 1 /* Relocate STACK from its old location to the new one. The local variables YYSIZE and YYSTACKSIZE give the old and new number of @@ -396,6 +378,26 @@ union yyalloc #endif +#if defined YYCOPY_NEEDED && YYCOPY_NEEDED +/* Copy COUNT objects from FROM to TO. The source and destination do + not overlap. */ +# ifndef YYCOPY +# if defined __GNUC__ && 1 < __GNUC__ +# define YYCOPY(To, From, Count) \ + __builtin_memcpy (To, From, (Count) * sizeof (*(From))) +# else +# define YYCOPY(To, From, Count) \ + do \ + { \ + YYSIZE_T yyi; \ + for (yyi = 0; yyi < (Count); yyi++) \ + (To)[yyi] = (From)[yyi]; \ + } \ + while (YYID (0)) +# endif +# endif +#endif /* !YYCOPY_NEEDED */ + /* YYFINAL -- State number of the termination state. */ #define YYFINAL 4 /* YYLAST -- Last index in YYTABLE. */ @@ -571,8 +573,8 @@ static const yytype_uint8 yyr2[] = 2, 0, 2, 2, 0, 2, 2, 2, 3, 2 }; -/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state - STATE-NUM when YYTABLE doesn't specify something else to do. Zero +/* YYDEFACT[STATE-NAME] -- Default reduction number in state STATE-NUM. + Performed when YYTABLE doesn't specify something else to do. Zero means the default is an error. */ static const yytype_uint8 yydefact[] = { @@ -633,8 +635,7 @@ static const yytype_int8 yypgoto[] = /* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If positive, shift that token. If negative, reduce the rule which - number is the opposite. If zero, do what YYDEFACT says. - If YYTABLE_NINF, syntax error. */ + number is the opposite. If YYTABLE_NINF, syntax error. */ #define YYTABLE_NINF -1 static const yytype_uint8 yytable[] = { @@ -654,6 +655,12 @@ static const yytype_uint8 yytable[] = 137, 0, 73, 139 }; +#define yypact_value_is_default(yystate) \ + ((yystate) == (-78)) + +#define yytable_value_is_error(yytable_value) \ + YYID (0) + static const yytype_int16 yycheck[] = { 5, 38, 39, 17, 18, 19, 12, 12, 17, 18, @@ -705,9 +712,18 @@ static const yytype_uint8 yystos[] = /* Like YYERROR except do call yyerror. This remains here temporarily to ease the transition to the new meaning of YYERROR, for GCC. - Once GCC version 2 has supplanted version 1, this can go. */ + Once GCC version 2 has supplanted version 1, this can go. However, + YYFAIL appears to be in use. Nevertheless, it is formally deprecated + in Bison 2.4.2's NEWS entry, where a plan to phase it out is + discussed. */ #define YYFAIL goto yyerrlab +#if defined YYFAIL + /* This is here to suppress warnings from the GCC cpp's + -Wunused-macros. Normally we don't worry about that warning, but + some users do, and we want to make it easy for users to remove + YYFAIL uses, which will produce warnings from Bison 2.5. */ +#endif #define YYRECOVERING() (!!yyerrstatus) @@ -717,7 +733,6 @@ do \ { \ yychar = (Token); \ yylval = (Value); \ - yytoken = YYTRANSLATE (yychar); \ YYPOPSTACK (1); \ goto yybackup; \ } \ @@ -759,19 +774,10 @@ while (YYID (0)) #endif -/* YY_LOCATION_PRINT -- Print the location on the stream. - This macro was not mandated originally: define only if we know - we won't break user code: when these are the locations we know. */ +/* This macro is provided for backward compatibility. */ #ifndef YY_LOCATION_PRINT -# if YYLTYPE_IS_TRIVIAL -# define YY_LOCATION_PRINT(File, Loc) \ - fprintf (File, "%d.%d-%d.%d", \ - (Loc).first_line, (Loc).first_column, \ - (Loc).last_line, (Loc).last_column) -# else -# define YY_LOCATION_PRINT(File, Loc) ((void) 0) -# endif +# define YY_LOCATION_PRINT(File, Loc) ((void) 0) #endif @@ -963,7 +969,6 @@ int yydebug; # define YYMAXDEPTH 10000 #endif - #if YYERROR_VERBOSE @@ -1066,115 +1071,142 @@ yytnamerr (char *yyres, const char *yystr) } # endif -/* Copy into YYRESULT an error message about the unexpected token - YYCHAR while in state YYSTATE. Return the number of bytes copied, - including the terminating null byte. If YYRESULT is null, do not - copy anything; just return the number of bytes that would be - copied. As a special case, return 0 if an ordinary "syntax error" - message will do. Return YYSIZE_MAXIMUM if overflow occurs during - size calculation. */ -static YYSIZE_T -yysyntax_error (char *yyresult, int yystate, int yychar) -{ - int yyn = yypact[yystate]; +/* Copy into *YYMSG, which is of size *YYMSG_ALLOC, an error message + about the unexpected token YYTOKEN for the state stack whose top is + YYSSP. - if (! (YYPACT_NINF < yyn && yyn <= YYLAST)) - return 0; - else + Return 0 if *YYMSG was successfully written. Return 1 if *YYMSG is + not large enough to hold the message. In that case, also set + *YYMSG_ALLOC to the required number of bytes. Return 2 if the + required number of bytes is too large to store. */ +static int +yysyntax_error (YYSIZE_T *yymsg_alloc, char **yymsg, + yytype_int16 *yyssp, int yytoken) +{ + YYSIZE_T yysize0 = yytnamerr (0, yytname[yytoken]); + YYSIZE_T yysize = yysize0; + YYSIZE_T yysize1; + enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 }; + /* Internationalized format string. */ + const char *yyformat = 0; + /* Arguments of yyformat. */ + char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM]; + /* Number of reported tokens (one for the "unexpected", one per + "expected"). */ + int yycount = 0; + + /* There are many possibilities here to consider: + - Assume YYFAIL is not used. It's too flawed to consider. See + + for details. YYERROR is fine as it does not invoke this + function. + - If this state is a consistent state with a default action, then + the only way this function was invoked is if the default action + is an error action. In that case, don't check for expected + tokens because there are none. + - The only way there can be no lookahead present (in yychar) is if + this state is a consistent state with a default action. Thus, + detecting the absence of a lookahead is sufficient to determine + that there is no unexpected or expected token to report. In that + case, just report a simple "syntax error". + - Don't assume there isn't a lookahead just because this state is a + consistent state with a default action. There might have been a + previous inconsistent state, consistent state with a non-default + action, or user semantic action that manipulated yychar. + - Of course, the expected token list depends on states to have + correct lookahead information, and it depends on the parser not + to perform extra reductions after fetching a lookahead from the + scanner and before detecting a syntax error. Thus, state merging + (from LALR or IELR) and default reductions corrupt the expected + token list. However, the list is correct for canonical LR with + one exception: it will still contain any token that will not be + accepted due to an error action in a later state. + */ + if (yytoken != YYEMPTY) { - int yytype = YYTRANSLATE (yychar); - YYSIZE_T yysize0 = yytnamerr (0, yytname[yytype]); - YYSIZE_T yysize = yysize0; - YYSIZE_T yysize1; - int yysize_overflow = 0; - enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 }; - char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM]; - int yyx; - -# if 0 - /* This is so xgettext sees the translatable formats that are - constructed on the fly. */ - YY_("syntax error, unexpected %s"); - YY_("syntax error, unexpected %s, expecting %s"); - YY_("syntax error, unexpected %s, expecting %s or %s"); - YY_("syntax error, unexpected %s, expecting %s or %s or %s"); - YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s"); -# endif - char *yyfmt; - char const *yyf; - static char const yyunexpected[] = "syntax error, unexpected %s"; - static char const yyexpecting[] = ", expecting %s"; - static char const yyor[] = " or %s"; - char yyformat[sizeof yyunexpected - + sizeof yyexpecting - 1 - + ((YYERROR_VERBOSE_ARGS_MAXIMUM - 2) - * (sizeof yyor - 1))]; - char const *yyprefix = yyexpecting; - - /* Start YYX at -YYN if negative to avoid negative indexes in - YYCHECK. */ - int yyxbegin = yyn < 0 ? -yyn : 0; - - /* Stay within bounds of both yycheck and yytname. */ - int yychecklim = YYLAST - yyn + 1; - int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS; - int yycount = 1; - - yyarg[0] = yytname[yytype]; - yyfmt = yystpcpy (yyformat, yyunexpected); - - for (yyx = yyxbegin; yyx < yyxend; ++yyx) - if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR) - { - if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM) - { - yycount = 1; - yysize = yysize0; - yyformat[sizeof yyunexpected - 1] = '\0'; - break; - } - yyarg[yycount++] = yytname[yyx]; - yysize1 = yysize + yytnamerr (0, yytname[yyx]); - yysize_overflow |= (yysize1 < yysize); - yysize = yysize1; - yyfmt = yystpcpy (yyfmt, yyprefix); - yyprefix = yyor; - } + int yyn = yypact[*yyssp]; + yyarg[yycount++] = yytname[yytoken]; + if (!yypact_value_is_default (yyn)) + { + /* Start YYX at -YYN if negative to avoid negative indexes in + YYCHECK. In other words, skip the first -YYN actions for + this state because they are default actions. */ + int yyxbegin = yyn < 0 ? -yyn : 0; + /* Stay within bounds of both yycheck and yytname. */ + int yychecklim = YYLAST - yyn + 1; + int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS; + int yyx; + + for (yyx = yyxbegin; yyx < yyxend; ++yyx) + if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR + && !yytable_value_is_error (yytable[yyx + yyn])) + { + if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM) + { + yycount = 1; + yysize = yysize0; + break; + } + yyarg[yycount++] = yytname[yyx]; + yysize1 = yysize + yytnamerr (0, yytname[yyx]); + if (! (yysize <= yysize1 + && yysize1 <= YYSTACK_ALLOC_MAXIMUM)) + return 2; + yysize = yysize1; + } + } + } - yyf = YY_(yyformat); - yysize1 = yysize + yystrlen (yyf); - yysize_overflow |= (yysize1 < yysize); - yysize = yysize1; + switch (yycount) + { +# define YYCASE_(N, S) \ + case N: \ + yyformat = S; \ + break + YYCASE_(0, YY_("syntax error")); + YYCASE_(1, YY_("syntax error, unexpected %s")); + YYCASE_(2, YY_("syntax error, unexpected %s, expecting %s")); + YYCASE_(3, YY_("syntax error, unexpected %s, expecting %s or %s")); + YYCASE_(4, YY_("syntax error, unexpected %s, expecting %s or %s or %s")); + YYCASE_(5, YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s")); +# undef YYCASE_ + } - if (yysize_overflow) - return YYSIZE_MAXIMUM; + yysize1 = yysize + yystrlen (yyformat); + if (! (yysize <= yysize1 && yysize1 <= YYSTACK_ALLOC_MAXIMUM)) + return 2; + yysize = yysize1; - if (yyresult) - { - /* Avoid sprintf, as that infringes on the user's name space. - Don't have undefined behavior even if the translation - produced a string with the wrong number of "%s"s. */ - char *yyp = yyresult; - int yyi = 0; - while ((*yyp = *yyf) != '\0') - { - if (*yyp == '%' && yyf[1] == 's' && yyi < yycount) - { - yyp += yytnamerr (yyp, yyarg[yyi++]); - yyf += 2; - } - else - { - yyp++; - yyf++; - } - } - } - return yysize; + if (*yymsg_alloc < yysize) + { + *yymsg_alloc = 2 * yysize; + if (! (yysize <= *yymsg_alloc + && *yymsg_alloc <= YYSTACK_ALLOC_MAXIMUM)) + *yymsg_alloc = YYSTACK_ALLOC_MAXIMUM; + return 1; } + + /* Avoid sprintf, as that infringes on the user's name space. + Don't have undefined behavior even if the translation + produced a string with the wrong number of "%s"s. */ + { + char *yyp = *yymsg; + int yyi = 0; + while ((*yyp = *yyformat) != '\0') + if (*yyp == '%' && yyformat[1] == 's' && yyi < yycount) + { + yyp += yytnamerr (yyp, yyarg[yyi++]); + yyformat += 2; + } + else + { + yyp++; + yyformat++; + } + } + return 0; } #endif /* YYERROR_VERBOSE */ - /*-----------------------------------------------. | Release the memory associated to this symbol. | @@ -1207,6 +1239,7 @@ yydestruct (yymsg, yytype, yyvaluep) } } + /* Prevent warnings from -Wmissing-prototypes. */ #ifdef YYPARSE_PARAM #if defined __STDC__ || defined __cplusplus @@ -1233,10 +1266,9 @@ YYSTYPE yylval; int yynerrs; - -/*-------------------------. -| yyparse or yypush_parse. | -`-------------------------*/ +/*----------. +| yyparse. | +`----------*/ #ifdef YYPARSE_PARAM #if (defined __STDC__ || defined __C99__FUNC__ \ @@ -1260,8 +1292,6 @@ yyparse () #endif #endif { - - int yystate; /* Number of tokens to shift before error messages enabled. */ int yyerrstatus; @@ -1416,7 +1446,7 @@ yybackup: /* First try to decide what to do without reference to lookahead token. */ yyn = yypact[yystate]; - if (yyn == YYPACT_NINF) + if (yypact_value_is_default (yyn)) goto yydefault; /* Not known => get a lookahead token if don't already have one. */ @@ -1447,8 +1477,8 @@ yybackup: yyn = yytable[yyn]; if (yyn <= 0) { - if (yyn == 0 || yyn == YYTABLE_NINF) - goto yyerrlab; + if (yytable_value_is_error (yyn)) + goto yyerrlab; yyn = -yyn; goto yyreduce; } @@ -1503,72 +1533,72 @@ yyreduce: { case 2: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 110 "dtc-parser.y" { the_boot_info = build_boot_info((yyvsp[(3) - (4)].re), (yyvsp[(4) - (4)].node), guess_boot_cpuid((yyvsp[(4) - (4)].node))); - ;} + } break; case 3: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 118 "dtc-parser.y" { (yyval.re) = NULL; - ;} + } break; case 4: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 122 "dtc-parser.y" { (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re)); - ;} + } break; case 5: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 129 "dtc-parser.y" { (yyval.re) = build_reserve_entry((yyvsp[(2) - (4)].integer), (yyvsp[(3) - (4)].integer)); - ;} + } break; case 6: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 133 "dtc-parser.y" { add_label(&(yyvsp[(2) - (2)].re)->labels, (yyvsp[(1) - (2)].labelref)); (yyval.re) = (yyvsp[(2) - (2)].re); - ;} + } break; case 7: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 141 "dtc-parser.y" { (yyval.node) = name_node((yyvsp[(2) - (2)].node), ""); - ;} + } break; case 8: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 145 "dtc-parser.y" { (yyval.node) = merge_nodes((yyvsp[(1) - (3)].node), (yyvsp[(3) - (3)].node)); - ;} + } break; case 9: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 149 "dtc-parser.y" { struct node *target = get_node_by_ref((yyvsp[(1) - (3)].node), (yyvsp[(2) - (3)].labelref)); @@ -1578,12 +1608,12 @@ yyreduce: else print_error("label or path, '%s', not found", (yyvsp[(2) - (3)].labelref)); (yyval.node) = (yyvsp[(1) - (3)].node); - ;} + } break; case 10: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 159 "dtc-parser.y" { struct node *target = get_node_by_ref((yyvsp[(1) - (4)].node), (yyvsp[(3) - (4)].labelref)); @@ -1594,112 +1624,112 @@ yyreduce: delete_node(target); (yyval.node) = (yyvsp[(1) - (4)].node); - ;} + } break; case 11: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 173 "dtc-parser.y" { (yyval.node) = build_node((yyvsp[(2) - (5)].proplist), (yyvsp[(3) - (5)].nodelist)); - ;} + } break; case 12: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 180 "dtc-parser.y" { (yyval.proplist) = NULL; - ;} + } break; case 13: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 184 "dtc-parser.y" { (yyval.proplist) = chain_property((yyvsp[(2) - (2)].prop), (yyvsp[(1) - (2)].proplist)); - ;} + } break; case 14: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 191 "dtc-parser.y" { (yyval.prop) = build_property((yyvsp[(1) - (4)].propnodename), (yyvsp[(3) - (4)].data)); - ;} + } break; case 15: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 195 "dtc-parser.y" { (yyval.prop) = build_property((yyvsp[(1) - (2)].propnodename), empty_data); - ;} + } break; case 16: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 199 "dtc-parser.y" { (yyval.prop) = build_property_delete((yyvsp[(2) - (3)].propnodename)); - ;} + } break; case 17: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 203 "dtc-parser.y" { add_label(&(yyvsp[(2) - (2)].prop)->labels, (yyvsp[(1) - (2)].labelref)); (yyval.prop) = (yyvsp[(2) - (2)].prop); - ;} + } break; case 18: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 211 "dtc-parser.y" { (yyval.data) = data_merge((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].data)); - ;} + } break; case 19: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 215 "dtc-parser.y" { (yyval.data) = data_merge((yyvsp[(1) - (3)].data), (yyvsp[(2) - (3)].array).data); - ;} + } break; case 20: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 219 "dtc-parser.y" { (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data)); - ;} + } break; case 21: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 223 "dtc-parser.y" { (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), REF_PATH, (yyvsp[(2) - (2)].labelref)); - ;} + } break; case 22: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 227 "dtc-parser.y" { FILE *f = srcfile_relative_open((yyvsp[(4) - (9)].data).val, NULL); @@ -1716,12 +1746,12 @@ yyreduce: (yyval.data) = data_merge((yyvsp[(1) - (9)].data), d); fclose(f); - ;} + } break; case 23: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 244 "dtc-parser.y" { FILE *f = srcfile_relative_open((yyvsp[(4) - (5)].data).val, NULL); @@ -1731,48 +1761,48 @@ yyreduce: (yyval.data) = data_merge((yyvsp[(1) - (5)].data), d); fclose(f); - ;} + } break; case 24: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 254 "dtc-parser.y" { (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); - ;} + } break; case 25: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 261 "dtc-parser.y" { (yyval.data) = empty_data; - ;} + } break; case 26: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 265 "dtc-parser.y" { (yyval.data) = (yyvsp[(1) - (2)].data); - ;} + } break; case 27: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 269 "dtc-parser.y" { (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); - ;} + } break; case 28: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 276 "dtc-parser.y" { (yyval.array).data = empty_data; @@ -1787,22 +1817,22 @@ yyreduce: " are currently supported"); (yyval.array).bits = 32; } - ;} + } break; case 29: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 291 "dtc-parser.y" { (yyval.array).data = empty_data; (yyval.array).bits = 32; - ;} + } break; case 30: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 296 "dtc-parser.y" { if ((yyvsp[(1) - (2)].array).bits < 64) { @@ -1822,12 +1852,12 @@ yyreduce: } (yyval.array).data = data_append_integer((yyvsp[(1) - (2)].array).data, (yyvsp[(2) - (2)].integer), (yyvsp[(1) - (2)].array).bits); - ;} + } break; case 31: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 316 "dtc-parser.y" { uint64_t val = ~0ULL >> (64 - (yyvsp[(1) - (2)].array).bits); @@ -1841,288 +1871,299 @@ yyreduce: "arrays with 32-bit elements."); (yyval.array).data = data_append_integer((yyvsp[(1) - (2)].array).data, val, (yyvsp[(1) - (2)].array).bits); - ;} + } break; case 32: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 330 "dtc-parser.y" { (yyval.array).data = data_add_marker((yyvsp[(1) - (2)].array).data, LABEL, (yyvsp[(2) - (2)].labelref)); - ;} + } break; case 33: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 337 "dtc-parser.y" { (yyval.integer) = eval_literal((yyvsp[(1) - (1)].literal), 0, 64); - ;} + } break; case 34: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 341 "dtc-parser.y" { (yyval.integer) = eval_char_literal((yyvsp[(1) - (1)].literal)); - ;} + } break; case 35: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 345 "dtc-parser.y" { (yyval.integer) = (yyvsp[(2) - (3)].integer); - ;} + } break; case 38: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 356 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (5)].integer) ? (yyvsp[(3) - (5)].integer) : (yyvsp[(5) - (5)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (5)].integer) ? (yyvsp[(3) - (5)].integer) : (yyvsp[(5) - (5)].integer); } break; case 40: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 361 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) || (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) || (yyvsp[(3) - (3)].integer); } break; case 42: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 366 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) && (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) && (yyvsp[(3) - (3)].integer); } break; case 44: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 371 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) | (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) | (yyvsp[(3) - (3)].integer); } break; case 46: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 376 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) ^ (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) ^ (yyvsp[(3) - (3)].integer); } break; case 48: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 381 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) & (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) & (yyvsp[(3) - (3)].integer); } break; case 50: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 386 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) == (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) == (yyvsp[(3) - (3)].integer); } break; case 51: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 387 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) != (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) != (yyvsp[(3) - (3)].integer); } break; case 53: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 392 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) < (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) < (yyvsp[(3) - (3)].integer); } break; case 54: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 393 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) > (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) > (yyvsp[(3) - (3)].integer); } break; case 55: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 394 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) <= (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) <= (yyvsp[(3) - (3)].integer); } break; case 56: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 395 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) >= (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) >= (yyvsp[(3) - (3)].integer); } break; case 57: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 399 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) << (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) << (yyvsp[(3) - (3)].integer); } break; case 58: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 400 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) >> (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) >> (yyvsp[(3) - (3)].integer); } break; case 60: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 405 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) + (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) + (yyvsp[(3) - (3)].integer); } break; case 61: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 406 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) - (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) - (yyvsp[(3) - (3)].integer); } break; case 63: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 411 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) * (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) * (yyvsp[(3) - (3)].integer); } break; case 64: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 412 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) / (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) / (yyvsp[(3) - (3)].integer); } break; case 65: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 413 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) % (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) % (yyvsp[(3) - (3)].integer); } break; case 68: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 419 "dtc-parser.y" - { (yyval.integer) = -(yyvsp[(2) - (2)].integer); ;} + { (yyval.integer) = -(yyvsp[(2) - (2)].integer); } break; case 69: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 420 "dtc-parser.y" - { (yyval.integer) = ~(yyvsp[(2) - (2)].integer); ;} + { (yyval.integer) = ~(yyvsp[(2) - (2)].integer); } break; case 70: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 421 "dtc-parser.y" - { (yyval.integer) = !(yyvsp[(2) - (2)].integer); ;} + { (yyval.integer) = !(yyvsp[(2) - (2)].integer); } break; case 71: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 426 "dtc-parser.y" { (yyval.data) = empty_data; - ;} + } break; case 72: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 430 "dtc-parser.y" { (yyval.data) = data_append_byte((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].byte)); - ;} + } break; case 73: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 434 "dtc-parser.y" { (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); - ;} + } break; case 74: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 441 "dtc-parser.y" { (yyval.nodelist) = NULL; - ;} + } break; case 75: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 445 "dtc-parser.y" { (yyval.nodelist) = chain_node((yyvsp[(1) - (2)].node), (yyvsp[(2) - (2)].nodelist)); - ;} + } break; case 76: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 449 "dtc-parser.y" { print_error("syntax error: properties must precede subnodes"); YYERROR; - ;} + } break; case 77: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 457 "dtc-parser.y" { (yyval.node) = name_node((yyvsp[(2) - (2)].node), (yyvsp[(1) - (2)].propnodename)); - ;} + } break; case 78: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 461 "dtc-parser.y" { (yyval.node) = name_node(build_node_delete(), (yyvsp[(2) - (3)].propnodename)); - ;} + } break; case 79: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 465 "dtc-parser.y" { add_label(&(yyvsp[(2) - (2)].node)->labels, (yyvsp[(1) - (2)].labelref)); (yyval.node) = (yyvsp[(2) - (2)].node); - ;} + } break; -/* Line 1455 of yacc.c */ -#line 2124 "dtc-parser.tab.c" +/* Line 1806 of yacc.c */ +#line 2154 "dtc-parser.tab.c" default: break; } + /* User semantic actions sometimes alter yychar, and that requires + that yytoken be updated with the new translation. We take the + approach of translating immediately before every use of yytoken. + One alternative is translating here after every semantic action, + but that translation would be missed if the semantic action invokes + YYABORT, YYACCEPT, or YYERROR immediately after altering yychar or + if it invokes YYBACKUP. In the case of YYABORT or YYACCEPT, an + incorrect destructor might then be invoked immediately. In the + case of YYERROR or YYBACKUP, subsequent parser actions might lead + to an incorrect destructor call or verbose syntax error message + before the lookahead is translated. */ YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc); YYPOPSTACK (yylen); @@ -2150,6 +2191,10 @@ yyreduce: | yyerrlab -- here on detecting error | `------------------------------------*/ yyerrlab: + /* Make sure we have latest lookahead translation. See comments at + user semantic actions for why this is necessary. */ + yytoken = yychar == YYEMPTY ? YYEMPTY : YYTRANSLATE (yychar); + /* If not already recovering from an error, report this error. */ if (!yyerrstatus) { @@ -2157,37 +2202,36 @@ yyerrlab: #if ! YYERROR_VERBOSE yyerror (YY_("syntax error")); #else +# define YYSYNTAX_ERROR yysyntax_error (&yymsg_alloc, &yymsg, \ + yyssp, yytoken) { - YYSIZE_T yysize = yysyntax_error (0, yystate, yychar); - if (yymsg_alloc < yysize && yymsg_alloc < YYSTACK_ALLOC_MAXIMUM) - { - YYSIZE_T yyalloc = 2 * yysize; - if (! (yysize <= yyalloc && yyalloc <= YYSTACK_ALLOC_MAXIMUM)) - yyalloc = YYSTACK_ALLOC_MAXIMUM; - if (yymsg != yymsgbuf) - YYSTACK_FREE (yymsg); - yymsg = (char *) YYSTACK_ALLOC (yyalloc); - if (yymsg) - yymsg_alloc = yyalloc; - else - { - yymsg = yymsgbuf; - yymsg_alloc = sizeof yymsgbuf; - } - } - - if (0 < yysize && yysize <= yymsg_alloc) - { - (void) yysyntax_error (yymsg, yystate, yychar); - yyerror (yymsg); - } - else - { - yyerror (YY_("syntax error")); - if (yysize != 0) - goto yyexhaustedlab; - } + char const *yymsgp = YY_("syntax error"); + int yysyntax_error_status; + yysyntax_error_status = YYSYNTAX_ERROR; + if (yysyntax_error_status == 0) + yymsgp = yymsg; + else if (yysyntax_error_status == 1) + { + if (yymsg != yymsgbuf) + YYSTACK_FREE (yymsg); + yymsg = (char *) YYSTACK_ALLOC (yymsg_alloc); + if (!yymsg) + { + yymsg = yymsgbuf; + yymsg_alloc = sizeof yymsgbuf; + yysyntax_error_status = 2; + } + else + { + yysyntax_error_status = YYSYNTAX_ERROR; + yymsgp = yymsg; + } + } + yyerror (yymsgp); + if (yysyntax_error_status == 2) + goto yyexhaustedlab; } +# undef YYSYNTAX_ERROR #endif } @@ -2246,7 +2290,7 @@ yyerrlab1: for (;;) { yyn = yypact[yystate]; - if (yyn != YYPACT_NINF) + if (!yypact_value_is_default (yyn)) { yyn += YYTERROR; if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR) @@ -2305,8 +2349,13 @@ yyexhaustedlab: yyreturn: if (yychar != YYEMPTY) - yydestruct ("Cleanup: discarding lookahead", - yytoken, &yylval); + { + /* Make sure we have latest lookahead translation. See comments at + user semantic actions for why this is necessary. */ + yytoken = YYTRANSLATE (yychar); + yydestruct ("Cleanup: discarding lookahead", + yytoken, &yylval); + } /* Do not reclaim the symbols of the rule which action triggered this YYABORT or YYACCEPT. */ YYPOPSTACK (yylen); @@ -2331,7 +2380,7 @@ yyreturn: -/* Line 1675 of yacc.c */ +/* Line 2067 of yacc.c */ #line 471 "dtc-parser.y" diff --git a/scripts/dtc/dtc-parser.tab.h_shipped b/scripts/dtc/dtc-parser.tab.h_shipped index 9d2dce4..25d3b88 100644 --- a/scripts/dtc/dtc-parser.tab.h_shipped +++ b/scripts/dtc/dtc-parser.tab.h_shipped @@ -1,10 +1,8 @@ +/* A Bison parser, made by GNU Bison 2.5. */ -/* A Bison parser, made by GNU Bison 2.4.1. */ - -/* Skeleton interface for Bison's Yacc-like parsers in C +/* Bison interface for Yacc-like parsers in C - Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 - Free Software Foundation, Inc. + Copyright (C) 1984, 1989-1990, 2000-2011 Free Software Foundation, Inc. This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -70,7 +68,7 @@ typedef union YYSTYPE { -/* Line 1676 of yacc.c */ +/* Line 2068 of yacc.c */ #line 40 "dtc-parser.y" char *propnodename; @@ -94,8 +92,8 @@ typedef union YYSTYPE -/* Line 1676 of yacc.c */ -#line 99 "dtc-parser.tab.h" +/* Line 2068 of yacc.c */ +#line 97 "dtc-parser.tab.h" } YYSTYPE; # define YYSTYPE_IS_TRIVIAL 1 # define yystype YYSTYPE /* obsolescent; will be withdrawn */ -- cgit v0.10.2 From 706b78f37fbed8d81b6061359f28a315fb9b1d73 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 13 Jun 2013 12:57:44 +0100 Subject: dtc: ensure #line directives don't consume data from the next line Previously, the #line parsing regex ended with ({WS}+[0-9]+)?. The {WS} could match line-break characters. If the #line directive did not contain the optional flags field at the end, this could cause any integer data on the next line to be consumed as part of the #line directive parsing. This could cause syntax errors (i.e. #line parsing consuming the leading 0 from a hex literal 0x1234, leaving x1234 to be parsed as cell data, which is a syntax error), or invalid compilation results (i.e. simply consuming literal 1234 as part of the #line processing, thus removing it from the cell data). Fix this by replacing {WS} with [ \t] so that it can't match line-breaks. Convert all instances of {WS}, even though the other instances should be irrelevant for any well-formed #line directive. This is done for consistency and ultimate safety. [Cherry picked from DTC commit a1ee6f068e1c8dbc62873645037a353d7852d5cc] Reported-by: Ian Campbell Signed-off-by: Stephen Warren Acked-by: David Gibson Signed-off-by: Grant Likely diff --git a/scripts/dtc/dtc-lexer.l b/scripts/dtc/dtc-lexer.l index 254d5af..3b41bfc 100644 --- a/scripts/dtc/dtc-lexer.l +++ b/scripts/dtc/dtc-lexer.l @@ -71,7 +71,7 @@ static int pop_input_file(void); push_input_file(name); } -<*>^"#"(line)?{WS}+[0-9]+{WS}+{STRING}({WS}+[0-9]+)? { +<*>^"#"(line)?[ \t]+[0-9]+[ \t]+{STRING}([ \t]+[0-9]+)? { char *line, *tmp, *fn; /* skip text before line # */ line = yytext; diff --git a/scripts/dtc/dtc-lexer.lex.c_shipped b/scripts/dtc/dtc-lexer.lex.c_shipped index a6c5fcd..2d30f41 100644 --- a/scripts/dtc/dtc-lexer.lex.c_shipped +++ b/scripts/dtc/dtc-lexer.lex.c_shipped @@ -405,19 +405,19 @@ static yyconst flex_int16_t yy_accept[161] = static yyconst flex_int32_t yy_ec[256] = { 0, 1, 1, 1, 1, 1, 1, 1, 1, 2, 3, - 2, 2, 2, 1, 1, 1, 1, 1, 1, 1, + 4, 4, 4, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 2, 4, 5, 6, 1, 1, 7, 8, 1, - 1, 9, 10, 10, 11, 10, 12, 13, 14, 15, - 15, 15, 15, 15, 15, 15, 15, 16, 1, 17, - 18, 19, 10, 10, 20, 20, 20, 20, 20, 20, - 21, 21, 21, 21, 21, 22, 21, 21, 21, 21, - 21, 21, 21, 21, 23, 21, 21, 24, 21, 21, - 1, 25, 26, 1, 21, 1, 20, 27, 28, 29, - - 30, 20, 21, 21, 31, 21, 21, 32, 33, 34, - 35, 36, 21, 37, 38, 39, 40, 41, 21, 24, - 42, 21, 43, 44, 45, 1, 1, 1, 1, 1, + 1, 2, 5, 6, 7, 1, 1, 8, 9, 1, + 1, 10, 11, 11, 12, 11, 13, 14, 15, 16, + 16, 16, 16, 16, 16, 16, 16, 17, 1, 18, + 19, 20, 11, 11, 21, 21, 21, 21, 21, 21, + 22, 22, 22, 22, 22, 23, 22, 22, 22, 22, + 22, 22, 22, 22, 24, 22, 22, 25, 22, 22, + 1, 26, 27, 1, 22, 1, 21, 28, 29, 30, + + 31, 21, 22, 22, 32, 22, 22, 33, 34, 35, + 36, 37, 22, 38, 39, 40, 41, 42, 22, 25, + 43, 22, 44, 45, 46, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, @@ -434,36 +434,36 @@ static yyconst flex_int32_t yy_ec[256] = 1, 1, 1, 1, 1 } ; -static yyconst flex_int32_t yy_meta[46] = +static yyconst flex_int32_t yy_meta[47] = { 0, - 1, 1, 1, 1, 1, 2, 3, 1, 2, 2, - 2, 4, 5, 5, 5, 6, 1, 1, 1, 7, - 8, 8, 8, 8, 1, 1, 7, 7, 7, 7, - 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, - 8, 8, 3, 1, 1 + 1, 1, 1, 1, 1, 1, 2, 3, 1, 2, + 2, 2, 4, 5, 5, 5, 6, 1, 1, 1, + 7, 8, 8, 8, 8, 1, 1, 7, 7, 7, + 7, 8, 8, 8, 8, 8, 8, 8, 8, 8, + 8, 8, 8, 3, 1, 1 } ; static yyconst flex_int16_t yy_base[175] = { 0, - 0, 388, 381, 40, 41, 386, 71, 385, 34, 44, - 390, 395, 60, 62, 371, 112, 111, 111, 111, 104, - 370, 106, 371, 342, 124, 119, 0, 144, 395, 0, - 123, 0, 159, 153, 165, 167, 395, 130, 395, 382, - 395, 0, 372, 122, 395, 157, 374, 379, 350, 21, - 346, 349, 395, 395, 395, 395, 395, 362, 395, 395, - 181, 346, 342, 395, 359, 0, 191, 343, 190, 351, - 350, 0, 0, 0, 173, 362, 177, 367, 357, 329, - 335, 328, 337, 331, 206, 329, 334, 327, 395, 338, - 170, 314, 346, 345, 318, 325, 343, 158, 316, 212, - - 322, 319, 320, 395, 340, 336, 308, 305, 314, 304, - 295, 138, 208, 220, 395, 292, 305, 265, 264, 254, - 201, 222, 285, 275, 273, 270, 236, 235, 225, 115, - 395, 395, 252, 216, 216, 217, 214, 230, 209, 220, - 213, 239, 211, 217, 216, 209, 229, 395, 240, 225, - 206, 169, 395, 395, 116, 106, 99, 54, 395, 395, - 254, 260, 268, 272, 276, 282, 289, 293, 301, 309, - 313, 319, 327, 335 + 0, 385, 378, 40, 41, 383, 72, 382, 34, 44, + 388, 393, 61, 117, 368, 116, 115, 115, 115, 48, + 367, 107, 368, 339, 127, 120, 0, 147, 393, 0, + 127, 0, 133, 156, 168, 153, 393, 125, 393, 380, + 393, 0, 369, 127, 393, 160, 371, 377, 347, 21, + 343, 346, 393, 393, 393, 393, 393, 359, 393, 393, + 183, 343, 339, 393, 356, 0, 183, 340, 187, 348, + 347, 0, 0, 0, 178, 359, 195, 365, 354, 326, + 332, 325, 334, 328, 204, 326, 331, 324, 393, 335, + 150, 311, 343, 342, 315, 322, 340, 179, 313, 207, + + 319, 316, 317, 393, 337, 333, 305, 302, 311, 301, + 310, 190, 338, 337, 393, 307, 322, 301, 305, 277, + 208, 311, 307, 278, 271, 270, 248, 246, 213, 130, + 393, 393, 263, 235, 207, 221, 218, 229, 213, 213, + 206, 234, 218, 210, 208, 193, 219, 393, 223, 204, + 176, 157, 393, 393, 120, 106, 97, 119, 393, 393, + 245, 251, 259, 263, 267, 273, 280, 284, 292, 300, + 304, 310, 318, 326 } ; static yyconst flex_int16_t yy_def[175] = @@ -489,108 +489,108 @@ static yyconst flex_int16_t yy_def[175] = 160, 160, 160, 160 } ; -static yyconst flex_int16_t yy_nxt[441] = +static yyconst flex_int16_t yy_nxt[440] = { 0, - 12, 13, 14, 15, 16, 12, 17, 18, 12, 12, - 12, 19, 12, 12, 12, 12, 20, 21, 22, 23, - 23, 23, 23, 23, 12, 12, 23, 23, 23, 23, + 12, 13, 14, 13, 15, 16, 12, 17, 18, 12, + 12, 12, 19, 12, 12, 12, 12, 20, 21, 22, + 23, 23, 23, 23, 23, 12, 12, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, - 23, 23, 12, 24, 12, 25, 34, 35, 35, 25, - 81, 26, 26, 27, 27, 27, 34, 35, 35, 82, - 28, 36, 36, 36, 36, 159, 29, 28, 28, 28, - 28, 12, 13, 14, 15, 16, 30, 17, 18, 30, - 30, 30, 26, 30, 30, 30, 12, 20, 21, 22, - 31, 31, 31, 31, 31, 32, 12, 31, 31, 31, + 23, 23, 23, 12, 24, 12, 25, 34, 35, 35, + 25, 81, 26, 26, 27, 27, 27, 34, 35, 35, + 82, 28, 36, 36, 36, 53, 54, 29, 28, 28, + 28, 28, 12, 13, 14, 13, 15, 16, 30, 17, + 18, 30, 30, 30, 26, 30, 30, 30, 12, 20, + 21, 22, 31, 31, 31, 31, 31, 32, 12, 31, 31, 31, 31, 31, 31, 31, 31, 31, 31, 31, - 31, 31, 31, 12, 24, 12, 39, 41, 45, 47, - 53, 54, 48, 56, 57, 61, 61, 47, 66, 45, - 48, 66, 66, 66, 39, 46, 40, 49, 59, 50, - 158, 51, 122, 52, 157, 49, 46, 50, 136, 63, - 137, 52, 156, 43, 40, 62, 65, 65, 65, 59, - 61, 61, 123, 65, 75, 69, 69, 69, 36, 36, - 65, 65, 65, 65, 70, 71, 72, 69, 69, 69, - 45, 46, 61, 61, 109, 77, 70, 71, 93, 110, - 68, 70, 71, 85, 85, 85, 66, 46, 155, 66, - - 66, 66, 69, 69, 69, 122, 59, 100, 100, 61, - 61, 70, 71, 100, 100, 148, 112, 154, 85, 85, - 85, 61, 61, 129, 129, 123, 129, 129, 135, 135, - 135, 142, 142, 148, 143, 149, 153, 135, 135, 135, - 142, 142, 160, 143, 152, 151, 150, 146, 145, 144, - 141, 140, 139, 149, 38, 38, 38, 38, 38, 38, - 38, 38, 42, 138, 134, 133, 42, 42, 44, 44, - 44, 44, 44, 44, 44, 44, 58, 58, 58, 58, - 64, 132, 64, 66, 131, 130, 66, 160, 66, 66, - 67, 128, 127, 67, 67, 67, 67, 73, 126, 73, - - 73, 76, 76, 76, 76, 76, 76, 76, 76, 78, - 78, 78, 78, 78, 78, 78, 78, 91, 125, 91, - 92, 124, 92, 92, 120, 92, 92, 121, 121, 121, - 121, 121, 121, 121, 121, 147, 147, 147, 147, 147, - 147, 147, 147, 119, 118, 117, 116, 115, 47, 114, - 110, 113, 111, 108, 107, 106, 48, 105, 104, 89, - 103, 102, 101, 99, 98, 97, 96, 95, 94, 79, - 77, 90, 89, 88, 59, 87, 86, 59, 84, 83, - 80, 79, 77, 74, 160, 60, 59, 55, 37, 160, - 33, 25, 26, 25, 11, 160, 160, 160, 160, 160, + 31, 31, 31, 31, 31, 12, 24, 12, 36, 36, + 36, 39, 41, 45, 47, 56, 57, 48, 61, 47, + 39, 159, 48, 66, 61, 45, 66, 66, 66, 158, + 46, 40, 49, 59, 50, 157, 51, 49, 52, 50, + 40, 63, 46, 52, 36, 36, 36, 156, 43, 62, + 65, 65, 65, 59, 136, 68, 137, 65, 75, 69, + 69, 69, 70, 71, 65, 65, 65, 65, 70, 71, + 72, 69, 69, 69, 61, 46, 45, 155, 154, 66, + 70, 71, 66, 66, 66, 122, 85, 85, 85, 59, + + 69, 69, 69, 46, 77, 100, 109, 93, 100, 70, + 71, 110, 112, 122, 129, 123, 153, 85, 85, 85, + 135, 135, 135, 148, 148, 160, 135, 135, 135, 152, + 142, 142, 142, 123, 143, 142, 142, 142, 151, 143, + 150, 146, 145, 149, 149, 38, 38, 38, 38, 38, + 38, 38, 38, 42, 144, 141, 140, 42, 42, 44, + 44, 44, 44, 44, 44, 44, 44, 58, 58, 58, + 58, 64, 139, 64, 66, 138, 134, 66, 133, 66, + 66, 67, 132, 131, 67, 67, 67, 67, 73, 130, + 73, 73, 76, 76, 76, 76, 76, 76, 76, 76, + + 78, 78, 78, 78, 78, 78, 78, 78, 91, 160, + 91, 92, 129, 92, 92, 128, 92, 92, 121, 121, + 121, 121, 121, 121, 121, 121, 147, 147, 147, 147, + 147, 147, 147, 147, 127, 126, 125, 124, 61, 61, + 120, 119, 118, 117, 116, 115, 47, 114, 110, 113, + 111, 108, 107, 106, 48, 105, 104, 89, 103, 102, + 101, 99, 98, 97, 96, 95, 94, 79, 77, 90, + 89, 88, 59, 87, 86, 59, 84, 83, 80, 79, + 77, 74, 160, 60, 59, 55, 37, 160, 33, 25, + 26, 25, 11, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, - 160, 160, 160, 160, 160, 160, 160, 160, 160, 160 + 160, 160, 160, 160, 160, 160, 160, 160, 160 } ; -static yyconst flex_int16_t yy_chk[441] = +static yyconst flex_int16_t yy_chk[440] = { 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 4, 9, 9, 9, 10, - 50, 4, 5, 5, 5, 5, 10, 10, 10, 50, - 5, 13, 13, 14, 14, 158, 5, 5, 5, 5, - 5, 7, 7, 7, 7, 7, 7, 7, 7, 7, + 1, 1, 1, 1, 1, 1, 4, 9, 9, 9, + 10, 50, 4, 5, 5, 5, 5, 10, 10, 10, + 50, 5, 13, 13, 13, 20, 20, 5, 5, 5, + 5, 5, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 16, 17, 18, 19, - 20, 20, 19, 22, 22, 25, 25, 26, 31, 44, - 26, 31, 31, 31, 38, 18, 16, 19, 31, 19, - 157, 19, 112, 19, 156, 26, 44, 26, 130, 26, - 130, 26, 155, 17, 38, 25, 28, 28, 28, 28, - 33, 33, 112, 28, 46, 34, 34, 34, 36, 36, - 28, 28, 28, 28, 34, 34, 34, 35, 35, 35, - 75, 46, 61, 61, 98, 77, 35, 35, 77, 98, - 33, 91, 91, 61, 61, 61, 67, 75, 152, 67, - - 67, 67, 69, 69, 69, 121, 67, 85, 85, 113, - 113, 69, 69, 100, 100, 143, 100, 151, 85, 85, - 85, 114, 114, 122, 122, 121, 129, 129, 135, 135, - 135, 138, 138, 147, 138, 143, 150, 129, 129, 129, - 142, 142, 149, 142, 146, 145, 144, 141, 140, 139, - 137, 136, 134, 147, 161, 161, 161, 161, 161, 161, - 161, 161, 162, 133, 128, 127, 162, 162, 163, 163, - 163, 163, 163, 163, 163, 163, 164, 164, 164, 164, - 165, 126, 165, 166, 125, 124, 166, 123, 166, 166, - 167, 120, 119, 167, 167, 167, 167, 168, 118, 168, - - 168, 169, 169, 169, 169, 169, 169, 169, 169, 170, - 170, 170, 170, 170, 170, 170, 170, 171, 117, 171, - 172, 116, 172, 172, 111, 172, 172, 173, 173, 173, - 173, 173, 173, 173, 173, 174, 174, 174, 174, 174, - 174, 174, 174, 110, 109, 108, 107, 106, 105, 103, - 102, 101, 99, 97, 96, 95, 94, 93, 92, 90, - 88, 87, 86, 84, 83, 82, 81, 80, 79, 78, - 76, 71, 70, 68, 65, 63, 62, 58, 52, 51, - 49, 48, 47, 43, 40, 24, 23, 21, 15, 11, - 8, 6, 3, 2, 160, 160, 160, 160, 160, 160, + 7, 7, 7, 7, 7, 7, 7, 7, 14, 14, + 14, 16, 17, 18, 19, 22, 22, 19, 25, 26, + 38, 158, 26, 31, 33, 44, 31, 31, 31, 157, + 18, 16, 19, 31, 19, 156, 19, 26, 19, 26, + 38, 26, 44, 26, 36, 36, 36, 155, 17, 25, + 28, 28, 28, 28, 130, 33, 130, 28, 46, 34, + 34, 34, 91, 91, 28, 28, 28, 28, 34, 34, + 34, 35, 35, 35, 61, 46, 75, 152, 151, 67, + 35, 35, 67, 67, 67, 112, 61, 61, 61, 67, + + 69, 69, 69, 75, 77, 85, 98, 77, 100, 69, + 69, 98, 100, 121, 129, 112, 150, 85, 85, 85, + 135, 135, 135, 143, 147, 149, 129, 129, 129, 146, + 138, 138, 138, 121, 138, 142, 142, 142, 145, 142, + 144, 141, 140, 143, 147, 161, 161, 161, 161, 161, + 161, 161, 161, 162, 139, 137, 136, 162, 162, 163, + 163, 163, 163, 163, 163, 163, 163, 164, 164, 164, + 164, 165, 134, 165, 166, 133, 128, 166, 127, 166, + 166, 167, 126, 125, 167, 167, 167, 167, 168, 124, + 168, 168, 169, 169, 169, 169, 169, 169, 169, 169, + + 170, 170, 170, 170, 170, 170, 170, 170, 171, 123, + 171, 172, 122, 172, 172, 120, 172, 172, 173, 173, + 173, 173, 173, 173, 173, 173, 174, 174, 174, 174, + 174, 174, 174, 174, 119, 118, 117, 116, 114, 113, + 111, 110, 109, 108, 107, 106, 105, 103, 102, 101, + 99, 97, 96, 95, 94, 93, 92, 90, 88, 87, + 86, 84, 83, 82, 81, 80, 79, 78, 76, 71, + 70, 68, 65, 63, 62, 58, 52, 51, 49, 48, + 47, 43, 40, 24, 23, 21, 15, 11, 8, 6, + 3, 2, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, - 160, 160, 160, 160, 160, 160, 160, 160, 160, 160 + 160, 160, 160, 160, 160, 160, 160, 160, 160 } ; static yy_state_type yy_last_accepting_state; -- cgit v0.10.2 From c9bfbb31af7c8428267b34eb9706a621ac219a28 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Thu, 13 Jun 2013 15:31:28 -0400 Subject: tulip: Properly check dma mapping result Tulip throws an error when dma debugging is enabled, as it doesn't properly check dma mapping results with dma_mapping_error() durring tx ring refills. Easy fix, just add it in, and drop the frame if the mapping is bad Signed-off-by: Neil Horman CC: Grant Grundler CC: "David S. Miller" Reviewed-by: Grant Grundler Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/dec/tulip/interrupt.c b/drivers/net/ethernet/dec/tulip/interrupt.c index 28a5e42..92306b3 100644 --- a/drivers/net/ethernet/dec/tulip/interrupt.c +++ b/drivers/net/ethernet/dec/tulip/interrupt.c @@ -76,6 +76,12 @@ int tulip_refill_rx(struct net_device *dev) mapping = pci_map_single(tp->pdev, skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE); + if (dma_mapping_error(&tp->pdev->dev, mapping)) { + dev_kfree_skb(skb); + tp->rx_buffers[entry].skb = NULL; + break; + } + tp->rx_buffers[entry].mapping = mapping; tp->rx_ring[entry].buffer1 = cpu_to_le32(mapping); -- cgit v0.10.2 From aaf9522d62d18626a60f7f2080671d853d9e8681 Mon Sep 17 00:00:00 2001 From: Benjamin Poirier Date: Thu, 13 Jun 2013 09:09:47 -0400 Subject: netiucv: Hold rtnl between name allocation and device registration. fixes a race condition between concurrent initializations of netiucv devices that try to use the same name. sysfs: cannot create duplicate filename '/devices/iucv/netiucv2' [...] Call Trace: ([<00000000002edea4>] sysfs_add_one+0xb0/0xdc) [<00000000002eecd4>] create_dir+0x80/0xfc [<00000000002eee38>] sysfs_create_dir+0xe8/0x118 [<00000000003835a8>] kobject_add_internal+0x120/0x2d0 [<00000000003839d6>] kobject_add+0x62/0x9c [<00000000003d9564>] device_add+0xcc/0x510 [<000003e00212c7b4>] netiucv_register_device+0xc0/0x1ec [netiucv] Signed-off-by: Benjamin Poirier Tested-by: Ursula Braun Signed-off-by: David S. Miller diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c index 4ffa66c..9ca3996 100644 --- a/drivers/s390/net/netiucv.c +++ b/drivers/s390/net/netiucv.c @@ -2040,6 +2040,7 @@ static struct net_device *netiucv_init_netdevice(char *username, char *userdata) netiucv_setup_netdevice); if (!dev) return NULL; + rtnl_lock(); if (dev_alloc_name(dev, dev->name) < 0) goto out_netdev; @@ -2061,6 +2062,7 @@ static struct net_device *netiucv_init_netdevice(char *username, char *userdata) out_fsm: kfree_fsm(privptr->fsm); out_netdev: + rtnl_unlock(); free_netdev(dev); return NULL; } @@ -2100,6 +2102,7 @@ static ssize_t conn_write(struct device_driver *drv, rc = netiucv_register_device(dev); if (rc) { + rtnl_unlock(); IUCV_DBF_TEXT_(setup, 2, "ret %d from netiucv_register_device\n", rc); goto out_free_ndev; @@ -2109,7 +2112,8 @@ static ssize_t conn_write(struct device_driver *drv, priv = netdev_priv(dev); SET_NETDEV_DEV(dev, priv->dev); - rc = register_netdev(dev); + rc = register_netdevice(dev); + rtnl_unlock(); if (rc) goto out_unreg; -- cgit v0.10.2 From c5c7774d7eb4397891edca9ebdf750ba90977a69 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Wed, 12 Jun 2013 14:26:44 -0400 Subject: sctp: fully initialize sctp_outq in sctp_outq_init In commit 2f94aabd9f6c925d77aecb3ff020f1cc12ed8f86 (refactor sctp_outq_teardown to insure proper re-initalization) we modified sctp_outq_teardown to use sctp_outq_init to fully re-initalize the outq structure. Steve West recently asked me why I removed the q->error = 0 initalization from sctp_outq_teardown. I did so because I was operating under the impression that sctp_outq_init would properly initalize that value for us, but it doesn't. sctp_outq_init operates under the assumption that the outq struct is all 0's (as it is when called from sctp_association_init), but using it in __sctp_outq_teardown violates that assumption. We should do a memset in sctp_outq_init to ensure that the entire structure is in a known state there instead. Signed-off-by: Neil Horman Reported-by: "West, Steve (NSN - US/Fort Worth)" CC: Vlad Yasevich CC: netdev@vger.kernel.org CC: davem@davemloft.net Acked-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c index 32a4625..be35e2d 100644 --- a/net/sctp/outqueue.c +++ b/net/sctp/outqueue.c @@ -206,6 +206,8 @@ static inline int sctp_cacc_skip(struct sctp_transport *primary, */ void sctp_outq_init(struct sctp_association *asoc, struct sctp_outq *q) { + memset(q, 0, sizeof(struct sctp_outq)); + q->asoc = asoc; INIT_LIST_HEAD(&q->out_chunk_list); INIT_LIST_HEAD(&q->control_chunk_list); @@ -213,11 +215,7 @@ void sctp_outq_init(struct sctp_association *asoc, struct sctp_outq *q) INIT_LIST_HEAD(&q->sacked); INIT_LIST_HEAD(&q->abandoned); - q->fast_rtx = 0; - q->outstanding_bytes = 0; q->empty = 1; - q->cork = 0; - q->out_qlen = 0; } /* Free the outqueue structure and any related pending chunks. -- cgit v0.10.2 From 5e85b364481af75e84228cd8704bd490493818a2 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Mon, 10 Jun 2013 10:10:25 +0300 Subject: mei: init: Flush scheduled work before resetting the device Flushing pending work items before resetting the device makes more sense than doing so afterwards. Some of them, like e.g. the NFC initialization one, find themselves with client IDs changed after the reset, eventually leading to trigger a client.c:mei_me_cl_by_id() warning after a few modprobe/rmmod cycles. Signed-off-by: Samuel Ortiz Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/misc/mei/init.c b/drivers/misc/mei/init.c index 713d89f..f580d30 100644 --- a/drivers/misc/mei/init.c +++ b/drivers/misc/mei/init.c @@ -197,6 +197,8 @@ void mei_stop(struct mei_device *dev) { dev_dbg(&dev->pdev->dev, "stopping the device.\n"); + flush_scheduled_work(); + mutex_lock(&dev->device_lock); cancel_delayed_work(&dev->timer_work); @@ -210,8 +212,6 @@ void mei_stop(struct mei_device *dev) mutex_unlock(&dev->device_lock); - flush_scheduled_work(); - mei_watchdog_unregister(dev); } EXPORT_SYMBOL_GPL(mei_stop); -- cgit v0.10.2 From 2753ff53d4158dbb394b3a2064001283fa9a8701 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Mon, 10 Jun 2013 10:10:26 +0300 Subject: mei: nfc: fix nfc device freeing The nfc_dev is a static variable and is not cleaned properly upon reset mainly ndev->cl and ndev->cl_info are not set to NULL after freeing which mei_stop:198: mei_me 0000:00:16.0: stopping the device. [ 404.253427] general protection fault: 0000 [#2] SMP [ 404.253437] Modules linked in: mei_me(-) binfmt_misc snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device edd af_packet cpufreq_conservative cpufreq_userspace cpufreq_powersave fuse loop dm_mod hid_generic usbhid hid coretemp acpi_cpufreq mperf kvm_intel kvm crc32c_intel ghash_clmulni_intel aesni_intel ablk_helper cryptd lrw gf128mul snd_hda_codec_hdmi glue_helper aes_x86_64 e1000e snd_hda_intel snd_hda_codec ehci_pci iTCO_wdt iTCO_vendor_support ehci_hcd snd_hwdep xhci_hcd snd_pcm usbcore ptp mei sg microcode snd_timer pps_core i2c_i801 snd pcspkr battery rtc_cmos lpc_ich mfd_core soundcore usb_common snd_page_alloc ac ext3 jbd mbcache drm_kms_helper drm intel_agp i2c_algo_bit intel_gtt i2c_core sd_mod crc_t10dif thermal fan video button processor thermal_sys hwmon ahci libahci libata scsi_mod [last unloaded: mei_me] [ 404.253591] CPU: 0 PID: 5551 Comm: modprobe Tainted: G D W 3.10.0-rc3 #1 [ 404.253611] task: ffff880143cd8300 ti: ffff880144a2a000 task.ti: ffff880144a2a000 [ 404.253619] RIP: 0010:[] [] device_del+0x1d/0x1d0 [ 404.253638] RSP: 0018:ffff880144a2bcf8 EFLAGS: 00010206 [ 404.253645] RAX: 2020302e30202030 RBX: ffff880144fdb000 RCX: 0000000000000086 [ 404.253652] RDX: 0000000000000001 RSI: 0000000000000086 RDI: ffff880144fdb000 [ 404.253659] RBP: ffff880144a2bd18 R08: 0000000000000651 R09: 0000000000000006 [ 404.253666] R10: 0000000000000651 R11: 0000000000000006 R12: ffff880144fdb000 [ 404.253673] R13: ffff880149371098 R14: ffff880144482c00 R15: ffffffffa04710e0 [ 404.253681] FS: 00007f251c59a700(0000) GS:ffff88014e200000(0000) knlGS:0000000000000000 [ 404.253689] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 404.253696] CR2: ffffffffff600400 CR3: 0000000145319000 CR4: 00000000001407f0 [ 404.253703] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 404.253710] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 404.253716] Stack: [ 404.253720] ffff880144fdb000 ffff880143ffe000 ffff880149371098 ffffffffa0471000 [ 404.253732] ffff880144a2bd38 ffffffff8133502d ffff88014e20cf48 ffff880143ffe1d8 [ 404.253744] ffff880144a2bd48 ffffffffa02a4749 ffff880144a2bd58 ffffffffa02a4ba1 [ 404.253755] Call Trace: [ 404.253766] [] device_unregister+0x1d/0x60 [ 404.253787] [] mei_cl_remove_device+0x9/0x10 [mei] [ 404.253804] [] mei_nfc_host_exit+0x21/0x30 [mei] [ 404.253819] [] mei_stop+0x3d/0x90 [mei] [ 404.253830] [] mei_me_remove+0x60/0xe0 [mei_me] [ 404.253843] [] pci_device_remove+0x37/0xb0 [ 404.253855] [] __device_release_driver+0x98/0x100 [ 404.253865] [] driver_detach+0xb0/0xc0 [ 404.253876] [] bus_remove_driver+0x8f/0x120 [ 404.253891] [] ? try_to_wake_up+0x2b0/0x2b0 [ 404.253903] [] driver_unregister+0x58/0x90 [ 404.253913] [] pci_unregister_driver+0x2b/0xb0 [ 404.253924] [] mei_me_driver_exit+0x10/0xdcc [mei_me] [ 404.253936] [] SyS_delete_module+0x198/0x2b0 [ 404.253949] [] ? do_page_fault+0x9/0x10 [ 404.253961] [] system_call_fastpath+0x16/0x1b [ 404.253967] Code: 41 5c 41 5d 41 5e 41 5f c9 c3 0f 1f 40 00 55 48 89 e5 41 56 41 55 41 54 49 89 fc 53 48 8b 87 88 00 00 00 4c 8b 37 48 85 c0 74 18 <48> 8b 78 78 4c 89 e2 be 02 00 00 00 48 81 c7 f8 00 00 00 e8 3b [ 404.254048] RIP [] device_del+0x1d/0x1d0 Cc: Samuel Ortiz Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/misc/mei/nfc.c b/drivers/misc/mei/nfc.c index 3adf8a7..d0c6907 100644 --- a/drivers/misc/mei/nfc.c +++ b/drivers/misc/mei/nfc.c @@ -142,6 +142,8 @@ static void mei_nfc_free(struct mei_nfc_dev *ndev) mei_cl_unlink(ndev->cl_info); kfree(ndev->cl_info); } + + memset(ndev, 0, sizeof(struct mei_nfc_dev)); } static int mei_nfc_build_bus_name(struct mei_nfc_dev *ndev) -- cgit v0.10.2 From 42f132febff3b7b42c6c9dbfc151f29233be3132 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Wed, 5 Jun 2013 10:51:13 +0300 Subject: mei: me: clear interrupts on the resume path We need to clear pending interrupts on the resume path. This brings the device into defined state before starting the reset flow This should solve suspend/resume issues: mei_me : wait hw ready failed. status = 0x0 mei_me : version message write failed Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c index a727464..0f26832 100644 --- a/drivers/misc/mei/pci-me.c +++ b/drivers/misc/mei/pci-me.c @@ -325,6 +325,7 @@ static int mei_me_pci_resume(struct device *device) mutex_lock(&dev->device_lock); dev->dev_state = MEI_DEV_POWER_UP; + mei_clear_interrupts(dev); mei_reset(dev, 1); mutex_unlock(&dev->device_lock); -- cgit v0.10.2 From 574780fd5e6ec52bd43e0bdb777a19e4c4c6aa9c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rn=20Engel?= Date: Thu, 30 May 2013 16:36:51 -0400 Subject: target/iscsi: don't corrupt bh_count in iscsit_stop_time2retain_timer() Here is a fun one. Bug seems to have been introduced by commit 140854cb, almost two years ago. I have no idea why we only started seeing it now, but we did. Rough callgraph: core_tpg_set_initiator_node_queue_depth() `-> spin_lock_irqsave(&tpg->session_lock, flags); `-> lio_tpg_shutdown_session() `-> iscsit_stop_time2retain_timer() `-> spin_unlock_bh(&se_tpg->session_lock); `-> spin_lock_bh(&se_tpg->session_lock); `-> spin_unlock_irqrestore(&tpg->session_lock, flags); core_tpg_set_initiator_node_queue_depth() used to call spin_lock_bh(), but 140854cb changed that to spin_lock_irqsave(). However, lio_tpg_shutdown_session() still claims to be called with spin_lock_bh() held, as does iscsit_stop_time2retain_timer(): * Called with spin_lock_bh(&struct se_portal_group->session_lock) held Stale documentation is mostly annoying, but in this case the dropping the lock with the _bh variant is plain wrong. It is also wrong to drop locks two functions below the lock-holder, but I will ignore that bit for now. After some more locking and unlocking we eventually hit this backtrace: ------------[ cut here ]------------ WARNING: at kernel/softirq.c:159 local_bh_enable_ip+0xe8/0x100() Pid: 24645, comm: lio_helper.py Tainted: G O 3.6.11+ Call Trace: [] warn_slowpath_common+0x7f/0xc0 [] ? iscsit_inc_conn_usage_count+0x37/0x50 [iscsi_target_mod] [] warn_slowpath_null+0x1a/0x20 [] local_bh_enable_ip+0xe8/0x100 [] _raw_spin_unlock_bh+0x15/0x20 [] iscsit_inc_conn_usage_count+0x37/0x50 [iscsi_target_mod] [] iscsit_stop_session+0xfa/0x1c0 [iscsi_target_mod] [] lio_tpg_shutdown_session+0x7b/0x90 [iscsi_target_mod] [] core_tpg_set_initiator_node_queue_depth+0xe4/0x290 [target_core_mod] [] iscsit_tpg_set_initiator_node_queue_depth+0x12/0x20 [iscsi_target_mod] [] lio_target_nacl_store_cmdsn_depth+0xa9/0x180 [iscsi_target_mod] [] target_fabric_nacl_base_attr_store+0x39/0x40 [target_core_mod] [] configfs_write_file+0xbd/0x120 [] vfs_write+0xc6/0x180 [] sys_write+0x51/0x90 [] system_call_fastpath+0x16/0x1b ---[ end trace 3747632b9b164652 ]--- As a pure band-aid, this patch drops the _bh. Signed-off-by: Joern Engel Cc: stable Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/iscsi/iscsi_target_erl0.c b/drivers/target/iscsi/iscsi_target_erl0.c index 8e6298c..dcb199d 100644 --- a/drivers/target/iscsi/iscsi_target_erl0.c +++ b/drivers/target/iscsi/iscsi_target_erl0.c @@ -842,11 +842,11 @@ int iscsit_stop_time2retain_timer(struct iscsi_session *sess) return 0; sess->time2retain_timer_flags |= ISCSI_TF_STOP; - spin_unlock_bh(&se_tpg->session_lock); + spin_unlock(&se_tpg->session_lock); del_timer_sync(&sess->time2retain_timer); - spin_lock_bh(&se_tpg->session_lock); + spin_lock(&se_tpg->session_lock); sess->time2retain_timer_flags &= ~ISCSI_TF_RUNNING; pr_debug("Stopped Time2Retain Timer for SID: %u\n", sess->sid); -- cgit v0.10.2 From b5aff3d2747bea08b386edd070941a45611ffe51 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 5 Jun 2013 09:54:17 -0700 Subject: tcm_qla2xxx: Fix residual for underrun commands that fail Suppose an initiator sends a DATA IN command with an allocation length shorter than the FC transfer length -- we get a target message like TARGET_CORE[qla2xxx]: Expected Transfer Length: 256 does not match SCSI CDB Length: 0 for SAM Opcode: 0x12 In that case, the target core adjusts the data_length and sets se_cmd->residual_count for the underrun. But now suppose that command fails and we end up in tcm_qla2xxx_queue_status() -- that function unconditionally overwrites residual_count with the already adjusted data_length, and the initiator will burp with a message like qla2xxx [0000:00:06.0]-301d:0: Dropped frame(s) detected (0x100 of 0x100 bytes). Fix this by adding on to the existing underflow residual count instead. Signed-off-by: Roland Dreier Cc: Giridhar Malavali Cc: Chad Dupuis Cc: stable Signed-off-by: Nicholas Bellinger diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c index 7a3870f..66b0b26 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c @@ -688,8 +688,12 @@ static int tcm_qla2xxx_queue_status(struct se_cmd *se_cmd) * For FCP_READ with CHECK_CONDITION status, clear cmd->bufflen * for qla_tgt_xmit_response LLD code */ + if (se_cmd->se_cmd_flags & SCF_OVERFLOW_BIT) { + se_cmd->se_cmd_flags &= ~SCF_OVERFLOW_BIT; + se_cmd->residual_count = 0; + } se_cmd->se_cmd_flags |= SCF_UNDERFLOW_BIT; - se_cmd->residual_count = se_cmd->data_length; + se_cmd->residual_count += se_cmd->data_length; cmd->bufflen = 0; } -- cgit v0.10.2 From 47ad2fcba9ddd0630acccb13c71f19a818947751 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 27 May 2013 16:38:19 +1000 Subject: xfs: don't emit v5 superblock warnings on write We write the superblock every 30s or so which results in the verifier being called. Right now that results in this output every 30s: XFS (vda): Version 5 superblock detected. This kernel has EXPERIMENTAL support enabled! Use of these features in this kernel is at your own risk! And spamming the logs. We don't need to check for whether we support v5 superblocks or whether there are feature bits we don't support set as these are only relevant when we first mount the filesytem. i.e. on superblock read. Hence for the write verification we can just skip all the checks (and hence verbose output) altogether. Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Signed-off-by: Ben Myers (cherry picked from commit 34510185abeaa5be9b178a41c0a03d30aec3db7e) diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index f6bfbd7..e8e310c 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -314,7 +314,8 @@ STATIC int xfs_mount_validate_sb( xfs_mount_t *mp, xfs_sb_t *sbp, - bool check_inprogress) + bool check_inprogress, + bool check_version) { /* @@ -337,9 +338,10 @@ xfs_mount_validate_sb( /* * Version 5 superblock feature mask validation. Reject combinations the - * kernel cannot support up front before checking anything else. + * kernel cannot support up front before checking anything else. For + * write validation, we don't need to check feature masks. */ - if (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_5) { + if (check_version && XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_5) { xfs_alert(mp, "Version 5 superblock detected. This kernel has EXPERIMENTAL support enabled!\n" "Use of these features in this kernel is at your own risk!"); @@ -675,7 +677,8 @@ xfs_sb_to_disk( static int xfs_sb_verify( - struct xfs_buf *bp) + struct xfs_buf *bp, + bool check_version) { struct xfs_mount *mp = bp->b_target->bt_mount; struct xfs_sb sb; @@ -686,7 +689,8 @@ xfs_sb_verify( * Only check the in progress field for the primary superblock as * mkfs.xfs doesn't clear it from secondary superblocks. */ - return xfs_mount_validate_sb(mp, &sb, bp->b_bn == XFS_SB_DADDR); + return xfs_mount_validate_sb(mp, &sb, bp->b_bn == XFS_SB_DADDR, + check_version); } /* @@ -719,7 +723,7 @@ xfs_sb_read_verify( goto out_error; } } - error = xfs_sb_verify(bp); + error = xfs_sb_verify(bp, true); out_error: if (error) { @@ -758,7 +762,7 @@ xfs_sb_write_verify( struct xfs_buf_log_item *bip = bp->b_fspriv; int error; - error = xfs_sb_verify(bp); + error = xfs_sb_verify(bp, false); if (error) { XFS_CORRUPTION_ERROR(__func__, XFS_ERRLEVEL_LOW, mp, bp->b_addr); xfs_buf_ioerror(bp, error); -- cgit v0.10.2 From 5170711df79b284cf95b3924322e8ac4c0fd6c76 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Wed, 12 Jun 2013 12:19:07 +1000 Subject: xfs: fix implicit padding in directory and attr CRC formats Michael L. Semon has been testing CRC patches on a 32 bit system and been seeing assert failures in the directory code from xfs/080. Thanks to Michael's heroic efforts with printk debugging, we found that the problem was that the last free space being left in the directory structure was too small to fit a unused tag structure and it was being corrupted and attempting to log a region out of bounds. Hence the assert failure looked something like: ..... #5 calling xfs_dir2_data_log_unused() 36 32 #1 4092 4095 4096 #2 8182 8183 4096 XFS: Assertion failed: first <= last && last < BBTOB(bp->b_length), file: fs/xfs/xfs_trans_buf.c, line: 568 Where #1 showed the first region of the dup being logged (i.e. the last 4 bytes of a directory buffer) and #2 shows the corrupt values being calculated from the length of the dup entry which overflowed the size of the buffer. It turns out that the problem was not in the logging code, nor in the freespace handling code. It is an initial condition bug that only shows up on 32 bit systems. When a new buffer is initialised, where's the freespace that is set up: [ 172.316249] calling xfs_dir2_leaf_addname() from xfs_dir_createname() [ 172.316346] #9 calling xfs_dir2_data_log_unused() [ 172.316351] #1 calling xfs_trans_log_buf() 60 63 4096 [ 172.316353] #2 calling xfs_trans_log_buf() 4094 4095 4096 Note the offset of the first region being logged? It's 60 bytes into the buffer. Once I saw that, I pretty much knew that the bug was going to be caused by this. Essentially, all direct entries are rounded to 8 bytes in length, and all entries start with an 8 byte alignment. This means that we can decode inplace as variables are naturally aligned. With the directory data supposedly starting on a 8 byte boundary, and all entries padded to 8 bytes, the minimum freespace in a directory block is supposed to be 8 bytes, which is large enough to fit a unused data entry structure (6 bytes in size). The fact we only have 4 bytes of free space indicates a directory data block alignment problem. And what do you know - there's an implicit hole in the directory data block header for the CRC format, which means the header is 60 byte on 32 bit intel systems and 64 bytes on 64 bit systems. Needs padding. And while looking at the structures, I found the same problem in the attr leaf header. Fix them both. Note that this only affects 32 bit systems with CRCs enabled. Everything else is just fine. Note that CRC enabled filesystems created before this fix on such systems will not be readable with this fix applied. Reported-by: Michael L. Semon Debugged-by: Michael L. Semon Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 8a1fd2950e1fe267e11fc8c85dcaa6b023b51b60) diff --git a/fs/xfs/xfs_attr_leaf.h b/fs/xfs/xfs_attr_leaf.h index f9d7846..444a770 100644 --- a/fs/xfs/xfs_attr_leaf.h +++ b/fs/xfs/xfs_attr_leaf.h @@ -128,6 +128,7 @@ struct xfs_attr3_leaf_hdr { __u8 holes; __u8 pad1; struct xfs_attr_leaf_map freemap[XFS_ATTR_LEAF_MAPSIZE]; + __be32 pad2; /* 64 bit alignment */ }; #define XFS_ATTR3_LEAF_CRC_OFF (offsetof(struct xfs_attr3_leaf_hdr, info.crc)) diff --git a/fs/xfs/xfs_dir2_format.h b/fs/xfs/xfs_dir2_format.h index 995f1f5..7826782 100644 --- a/fs/xfs/xfs_dir2_format.h +++ b/fs/xfs/xfs_dir2_format.h @@ -266,6 +266,7 @@ struct xfs_dir3_blk_hdr { struct xfs_dir3_data_hdr { struct xfs_dir3_blk_hdr hdr; xfs_dir2_data_free_t best_free[XFS_DIR2_DATA_FD_COUNT]; + __be32 pad; /* 64 bit alignment */ }; #define XFS_DIR3_DATA_CRC_OFF offsetof(struct xfs_dir3_data_hdr, hdr.crc) @@ -477,7 +478,7 @@ struct xfs_dir3_leaf_hdr { struct xfs_da3_blkinfo info; /* header for da routines */ __be16 count; /* count of entries */ __be16 stale; /* count of stale entries */ - __be32 pad; + __be32 pad; /* 64 bit alignment */ }; struct xfs_dir3_icleaf_hdr { @@ -715,7 +716,7 @@ struct xfs_dir3_free_hdr { __be32 firstdb; /* db of first entry */ __be32 nvalid; /* count of valid entries */ __be32 nused; /* count of used entries */ - __be32 pad; /* 64 bit alignment. */ + __be32 pad; /* 64 bit alignment */ }; struct xfs_dir3_free { -- cgit v0.10.2 From 088c9f67c3f53339d2bc20b42a9cb904901fdc5d Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Wed, 12 Jun 2013 12:19:08 +1000 Subject: xfs: ensure btree root split sets blkno correctly For CRC enabled filesystems, the BMBT is rooted in an inode, so it passes through a different code path on root splits than the freespace and inode btrees. This is much less traversed by xfstests than the other trees. When testing on a 1k block size filesystem, I've been seeing ASSERT failures in generic/234 like: XFS: Assertion failed: cur->bc_btnum != XFS_BTNUM_BMAP || cur->bc_private.b.allocated == 0, file: fs/xfs/xfs_btree.c, line: 317 which are generally preceded by a lblock check failure. I noticed this in the bmbt stats: $ pminfo -f xfs.btree.block_map xfs.btree.block_map.lookup value 39135 xfs.btree.block_map.compare value 268432 xfs.btree.block_map.insrec value 15786 xfs.btree.block_map.delrec value 13884 xfs.btree.block_map.newroot value 2 xfs.btree.block_map.killroot value 0 ..... Very little coverage of root splits and merges. Indeed, on a 4k filesystem, block_map.newroot and block_map.killroot are both zero. i.e. the code is not exercised at all, and it's the only generic btree infrastructure operation that is not exercised by a default run of xfstests. Turns out that on a 1k filesystem, generic/234 accounts for one of those two root splits, and that is somewhat of a smoking gun. In fact, it's the same problem we saw in the directory/attr code where headers are memcpy()d from one block to another without updating the self describing metadata. Simple fix - when copying the header out of the root block, make sure the block number is updated correctly. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit ade1335afef556df6538eb02e8c0dc91fbd9cc37) diff --git a/fs/xfs/xfs_btree.c b/fs/xfs/xfs_btree.c index 8804b8a..0903960 100644 --- a/fs/xfs/xfs_btree.c +++ b/fs/xfs/xfs_btree.c @@ -2544,7 +2544,17 @@ xfs_btree_new_iroot( if (error) goto error0; + /* + * we can't just memcpy() the root in for CRC enabled btree blocks. + * In that case have to also ensure the blkno remains correct + */ memcpy(cblock, block, xfs_btree_block_len(cur)); + if (cur->bc_flags & XFS_BTREE_CRC_BLOCKS) { + if (cur->bc_flags & XFS_BTREE_LONG_PTRS) + cblock->bb_u.l.bb_blkno = cpu_to_be64(cbp->b_bn); + else + cblock->bb_u.s.bb_blkno = cpu_to_be64(cbp->b_bn); + } be16_add_cpu(&block->bb_level, 1); xfs_btree_set_numrecs(block, 1); -- cgit v0.10.2 From d302cf1d316dca5f567e89872cf5d475c9a55f74 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Wed, 12 Jun 2013 12:19:06 +1000 Subject: xfs: don't shutdown log recovery on validation errors Unfortunately, we cannot guarantee that items logged multiple times and replayed by log recovery do not take objects back in time. When they are taken back in time, the go into an intermediate state which is corrupt, and hence verification that occurs on this intermediate state causes log recovery to abort with a corruption shutdown. Instead of causing a shutdown and unmountable filesystem, don't verify post-recovery items before they are written to disk. This is less than optimal, but there is no way to detect this issue for non-CRC filesystems If log recovery successfully completes, this will be undone and the object will be consistent by subsequent transactions that are replayed, so in most cases we don't need to take drastic action. For CRC enabled filesystems, leave the verifiers in place - we need to call them to recalculate the CRCs on the objects anyway. This recovery problem can be solved for such filesystems - we have a LSN stamped in all metadata at writeback time that we can to determine whether the item should be replayed or not. This is a separate piece of work, so is not addressed by this patch. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 9222a9cf86c0d64ffbedf567412b55da18763aa3) diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index 45a85ff..7cf5e4e 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -1845,7 +1845,13 @@ xlog_recover_do_inode_buffer( xfs_agino_t *buffer_nextp; trace_xfs_log_recover_buf_inode_buf(mp->m_log, buf_f); - bp->b_ops = &xfs_inode_buf_ops; + + /* + * Post recovery validation only works properly on CRC enabled + * filesystems. + */ + if (xfs_sb_version_hascrc(&mp->m_sb)) + bp->b_ops = &xfs_inode_buf_ops; inodes_per_buf = BBTOB(bp->b_io_length) >> mp->m_sb.sb_inodelog; for (i = 0; i < inodes_per_buf; i++) { @@ -2205,7 +2211,16 @@ xlog_recover_do_reg_buffer( /* Shouldn't be any more regions */ ASSERT(i == item->ri_total); - xlog_recovery_validate_buf_type(mp, bp, buf_f); + /* + * We can only do post recovery validation on items on CRC enabled + * fielsystems as we need to know when the buffer was written to be able + * to determine if we should have replayed the item. If we replay old + * metadata over a newer buffer, then it will enter a temporarily + * inconsistent state resulting in verification failures. Hence for now + * just avoid the verification stage for non-crc filesystems + */ + if (xfs_sb_version_hascrc(&mp->m_sb)) + xlog_recovery_validate_buf_type(mp, bp, buf_f); } /* -- cgit v0.10.2 From 29ce3785b22da47c49f4ef6e14b9014fa5dee261 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Wed, 8 May 2013 14:05:34 -0700 Subject: idle: Enable interrupts in the weak arch_cpu_idle() implementation PARISC bootup triggers the warning at kernel/cpu/idle.c:96. That's caused by the weak arch_cpu_idle() implementation, which is provided to avoid that architectures implement idle_poll over and over. The switchover to polling mode happens in the first call of the weak arch_cpu_idle() implementation, but that code fails to reenable interrupts and therefor triggers the warning. Fix this by enabling interrupts in the weak arch_cpu_idle() code. [ tglx: Made the changelog match the patch ] Signed-off-by: James Bottomley Reviewed-by: Srivatsa S. Bhat Link: http://lkml.kernel.org/r/1371236142.2726.43.camel@dabdike Signed-off-by: Thomas Gleixner diff --git a/kernel/cpu/idle.c b/kernel/cpu/idle.c index bf2ee1a..e695c0a 100644 --- a/kernel/cpu/idle.c +++ b/kernel/cpu/idle.c @@ -59,6 +59,7 @@ void __weak arch_cpu_idle_dead(void) { } void __weak arch_cpu_idle(void) { cpu_idle_force_poll = 1; + local_irq_enable(); } /* -- cgit v0.10.2 From c139b1ee4e36374af705660af6172d7477352792 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 7 Jun 2013 10:04:54 -0400 Subject: drm/radeon: fix UVD on big endian This fixes the kernel side so that the ring should come up and ring and IB tests should work. The userspace UVD drivers will also need big endian fixes. Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 0e53416..6948eb8 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -2687,6 +2687,9 @@ void r600_uvd_rbc_stop(struct radeon_device *rdev) int r600_uvd_init(struct radeon_device *rdev) { int i, j, r; + /* disable byte swapping */ + u32 lmi_swap_cntl = 0; + u32 mp_swap_cntl = 0; /* raise clocks while booting up the VCPU */ radeon_set_uvd_clocks(rdev, 53300, 40000); @@ -2711,9 +2714,13 @@ int r600_uvd_init(struct radeon_device *rdev) WREG32(UVD_LMI_CTRL, 0x40 | (1 << 8) | (1 << 13) | (1 << 21) | (1 << 9) | (1 << 20)); - /* disable byte swapping */ - WREG32(UVD_LMI_SWAP_CNTL, 0); - WREG32(UVD_MP_SWAP_CNTL, 0); +#ifdef __BIG_ENDIAN + /* swap (8 in 32) RB and IB */ + lmi_swap_cntl = 0xa; + mp_swap_cntl = 0; +#endif + WREG32(UVD_LMI_SWAP_CNTL, lmi_swap_cntl); + WREG32(UVD_MP_SWAP_CNTL, mp_swap_cntl); WREG32(UVD_MPC_SET_MUXA0, 0x40c2040); WREG32(UVD_MPC_SET_MUXA1, 0x0); diff --git a/drivers/gpu/drm/radeon/radeon_uvd.c b/drivers/gpu/drm/radeon/radeon_uvd.c index 9f55ade..cad735d 100644 --- a/drivers/gpu/drm/radeon/radeon_uvd.c +++ b/drivers/gpu/drm/radeon/radeon_uvd.c @@ -627,19 +627,19 @@ int radeon_uvd_get_create_msg(struct radeon_device *rdev, int ring, } /* stitch together an UVD create msg */ - msg[0] = 0x00000de4; - msg[1] = 0x00000000; - msg[2] = handle; - msg[3] = 0x00000000; - msg[4] = 0x00000000; - msg[5] = 0x00000000; - msg[6] = 0x00000000; - msg[7] = 0x00000780; - msg[8] = 0x00000440; - msg[9] = 0x00000000; - msg[10] = 0x01b37000; + msg[0] = cpu_to_le32(0x00000de4); + msg[1] = cpu_to_le32(0x00000000); + msg[2] = cpu_to_le32(handle); + msg[3] = cpu_to_le32(0x00000000); + msg[4] = cpu_to_le32(0x00000000); + msg[5] = cpu_to_le32(0x00000000); + msg[6] = cpu_to_le32(0x00000000); + msg[7] = cpu_to_le32(0x00000780); + msg[8] = cpu_to_le32(0x00000440); + msg[9] = cpu_to_le32(0x00000000); + msg[10] = cpu_to_le32(0x01b37000); for (i = 11; i < 1024; ++i) - msg[i] = 0x0; + msg[i] = cpu_to_le32(0x0); radeon_bo_kunmap(bo); radeon_bo_unreserve(bo); @@ -673,12 +673,12 @@ int radeon_uvd_get_destroy_msg(struct radeon_device *rdev, int ring, } /* stitch together an UVD destroy msg */ - msg[0] = 0x00000de4; - msg[1] = 0x00000002; - msg[2] = handle; - msg[3] = 0x00000000; + msg[0] = cpu_to_le32(0x00000de4); + msg[1] = cpu_to_le32(0x00000002); + msg[2] = cpu_to_le32(handle); + msg[3] = cpu_to_le32(0x00000000); for (i = 4; i < 1024; ++i) - msg[i] = 0x0; + msg[i] = cpu_to_le32(0x0); radeon_bo_kunmap(bo); radeon_bo_unreserve(bo); -- cgit v0.10.2 From e7b2c4069252732d52f1de6d1f7c82d99a156659 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 14 Jun 2013 21:09:47 +0200 Subject: fput: task_work_add() can fail if the caller has passed exit_task_work() fput() assumes that it can't be called after exit_task_work() but this is not true, for example free_ipc_ns()->shm_destroy() can do this. In this case fput() silently leaks the file. Change it to fallback to delayed_fput_work if task_work_add() fails. The patch looks complicated but it is not, it changes the code from if (PF_KTHREAD) { schedule_work(...); return; } task_work_add(...) to if (!PF_KTHREAD) { if (!task_work_add(...)) return; /* fallback */ } schedule_work(...); As for shm_destroy() in particular, we could make another fix but I think this change makes sense anyway. There could be another similar user, it is not safe to assume that task_work_add() can't fail. Reported-by: Andrey Vagin Signed-off-by: Oleg Nesterov Signed-off-by: Al Viro diff --git a/fs/file_table.c b/fs/file_table.c index cd4d87a..485dc0e 100644 --- a/fs/file_table.c +++ b/fs/file_table.c @@ -306,17 +306,18 @@ void fput(struct file *file) { if (atomic_long_dec_and_test(&file->f_count)) { struct task_struct *task = current; + unsigned long flags; + file_sb_list_del(file); - if (unlikely(in_interrupt() || task->flags & PF_KTHREAD)) { - unsigned long flags; - spin_lock_irqsave(&delayed_fput_lock, flags); - list_add(&file->f_u.fu_list, &delayed_fput_list); - schedule_work(&delayed_fput_work); - spin_unlock_irqrestore(&delayed_fput_lock, flags); - return; + if (likely(!in_interrupt() && !(task->flags & PF_KTHREAD))) { + init_task_work(&file->f_u.fu_rcuhead, ____fput); + if (!task_work_add(task, &file->f_u.fu_rcuhead, true)) + return; } - init_task_work(&file->f_u.fu_rcuhead, ____fput); - task_work_add(task, &file->f_u.fu_rcuhead, true); + spin_lock_irqsave(&delayed_fput_lock, flags); + list_add(&file->f_u.fu_list, &delayed_fput_list); + schedule_work(&delayed_fput_work); + spin_unlock_irqrestore(&delayed_fput_lock, flags); } } -- cgit v0.10.2 From 8aac62706adaaf0fab02c4327761561c8bda9448 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 14 Jun 2013 21:09:49 +0200 Subject: move exit_task_namespaces() outside of exit_notify() exit_notify() does exit_task_namespaces() after forget_original_parent(). This was needed to ensure that ->nsproxy can't be cleared prematurely, an exiting child we are going to reparent can do do_notify_parent() and use the parent's (ours) pid_ns. However, after 32084504 "pidns: use task_active_pid_ns in do_notify_parent" ->nsproxy != NULL is no longer needed, we rely on task_active_pid_ns(). Move exit_task_namespaces() from exit_notify() to do_exit(), after exit_fs() and before exit_task_work(). This solves the problem reported by Andrey, free_ipc_ns()->shm_destroy() does fput() which needs task_work_add(). Note: this particular problem can be fixed if we change fput(), and that change makes sense anyway. But there is another reason to move the callsite. The original reason for exit_task_namespaces() from the middle of exit_notify() was subtle and it has already gone away, now this looks confusing. And this allows us do simplify exit_notify(), we can avoid unlock/lock(tasklist) and we can use ->exit_state instead of PF_EXITING in forget_original_parent(). Reported-by: Andrey Vagin Signed-off-by: Oleg Nesterov Acked-by: "Eric W. Biederman" Acked-by: Andrey Vagin Signed-off-by: Al Viro diff --git a/kernel/exit.c b/kernel/exit.c index af2eb3c..7bb73f9 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -649,7 +649,6 @@ static void exit_notify(struct task_struct *tsk, int group_dead) * jobs, send them a SIGHUP and then a SIGCONT. (POSIX 3.2.2.2) */ forget_original_parent(tsk); - exit_task_namespaces(tsk); write_lock_irq(&tasklist_lock); if (group_dead) @@ -795,6 +794,7 @@ void do_exit(long code) exit_shm(tsk); exit_files(tsk); exit_fs(tsk); + exit_task_namespaces(tsk); exit_task_work(tsk); check_stack_usage(); exit_thread(); -- cgit v0.10.2 From 05252901199d886a68830befb135d1723730ca86 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 6 Jun 2013 19:33:47 -0400 Subject: use can_lookup() instead of direct checks of ->i_op->lookup a couple of places got missed back when Linus has introduced that one... Signed-off-by: Al Viro diff --git a/fs/namei.c b/fs/namei.c index 85e40d1..9ed9361 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -1976,7 +1976,7 @@ static int path_lookupat(int dfd, const char *name, err = complete_walk(nd); if (!err && nd->flags & LOOKUP_DIRECTORY) { - if (!nd->inode->i_op->lookup) { + if (!can_lookup(nd->inode)) { path_put(&nd->path); err = -ENOTDIR; } @@ -2850,7 +2850,7 @@ finish_lookup: if ((open_flag & O_CREAT) && S_ISDIR(nd->inode->i_mode)) goto out; error = -ENOTDIR; - if ((nd->flags & LOOKUP_DIRECTORY) && !nd->inode->i_op->lookup) + if ((nd->flags & LOOKUP_DIRECTORY) && !can_lookup(nd->inode)) goto out; audit_inode(name, nd->path.dentry, 0); finish_open: -- cgit v0.10.2 From dd6c5cd8fedddc9605209098e2fa4e82c7af22aa Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 5 Jun 2013 14:07:08 -0400 Subject: snd_pcm_link(): fix a leak... in case when snd_pcm_stream_linked(substream) is true, we end up leaking group. Signed-off-by: Al Viro diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index ccfa383..f928181 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -1649,6 +1649,7 @@ static int snd_pcm_link(struct snd_pcm_substream *substream, int fd) } if (!snd_pcm_stream_linked(substream)) { substream->group = group; + group = NULL; spin_lock_init(&substream->group->lock); INIT_LIST_HEAD(&substream->group->substreams); list_add_tail(&substream->link_list, &substream->group->substreams); @@ -1663,8 +1664,7 @@ static int snd_pcm_link(struct snd_pcm_substream *substream, int fd) _nolock: snd_card_unref(substream1->pcm->card); fput_light(file, fput_needed); - if (res < 0) - kfree(group); + kfree(group); return res; } -- cgit v0.10.2 From 0e37739b1c96d65e6433998454985de994383019 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 13 Jun 2013 21:04:56 +1000 Subject: powerpc: Fix stack overflow crash in resume_kernel when ftracing It's possible for us to crash when running with ftrace enabled, eg: Bad kernel stack pointer bffffd12 at c00000000000a454 cpu 0x3: Vector: 300 (Data Access) at [c00000000ffe3d40] pc: c00000000000a454: resume_kernel+0x34/0x60 lr: c00000000000335c: performance_monitor_common+0x15c/0x180 sp: bffffd12 msr: 8000000000001032 dar: bffffd12 dsisr: 42000000 If we look at current's stack (paca->__current->stack) we see it is equal to c0000002ecab0000. Our stack is 16K, and comparing to paca->kstack (c0000002ecab3e30) we can see that we have overflowed our kernel stack. This leads to us writing over our struct thread_info, and in this case we have corrupted thread_info->flags and set _TIF_EMULATE_STACK_STORE. Dumping the stack we see: 3:mon> t c0000002ecab0000 [c0000002ecab0000] c00000000002131c .performance_monitor_exception+0x5c/0x70 [c0000002ecab0080] c00000000000335c performance_monitor_common+0x15c/0x180 --- Exception: f01 (Performance Monitor) at c0000000000fb2ec .trace_hardirqs_off+0x1c/0x30 [c0000002ecab0370] c00000000016fdb0 .trace_graph_entry+0xb0/0x280 (unreliable) [c0000002ecab0410] c00000000003d038 .prepare_ftrace_return+0x98/0x130 [c0000002ecab04b0] c00000000000a920 .ftrace_graph_caller+0x14/0x28 [c0000002ecab0520] c0000000000d6b58 .idle_cpu+0x18/0x90 [c0000002ecab05a0] c00000000000a934 .return_to_handler+0x0/0x34 [c0000002ecab0620] c00000000001e660 .timer_interrupt+0x160/0x300 [c0000002ecab06d0] c0000000000025dc decrementer_common+0x15c/0x180 --- Exception: 901 (Decrementer) at c0000000000104d4 .arch_local_irq_restore+0x74/0xa0 [c0000002ecab09c0] c0000000000fe044 .trace_hardirqs_on+0x14/0x30 (unreliable) [c0000002ecab0fb0] c00000000016fe3c .trace_graph_entry+0x13c/0x280 [c0000002ecab1050] c00000000003d038 .prepare_ftrace_return+0x98/0x130 [c0000002ecab10f0] c00000000000a920 .ftrace_graph_caller+0x14/0x28 [c0000002ecab1160] c0000000000161f0 .__ppc64_runlatch_on+0x10/0x40 [c0000002ecab11d0] c00000000000a934 .return_to_handler+0x0/0x34 --- Exception: 901 (Decrementer) at c0000000000104d4 .arch_local_irq_restore+0x74/0xa0 ... and so on __ppc64_runlatch_on() is called from RUNLATCH_ON in the exception entry path. At that point the irq state is not consistent, ie. interrupts are hard disabled (by the exception entry), but the paca soft-enabled flag may be out of sync. This leads to the local_irq_restore() in trace_graph_entry() actually enabling interrupts, which we do not want. Because we have not yet reprogrammed the decrementer we immediately take another decrementer exception, and recurse. The fix is twofold. Firstly make sure we call DISABLE_INTS before calling RUNLATCH_ON. The badly named DISABLE_INTS actually reconciles the irq state in the paca with the hardware, making it safe again to call local_irq_save/restore(). Although that should be sufficient to fix the bug, we also mark the runlatch routines as notrace. They are called very early in the exception entry and we are asking for trouble tracing them. They are also fairly uninteresting and tracing them just adds unnecessary overhead. [ This regression was introduced by fe1952fc0afb9a2e4c79f103c08aef5d13db1873 "powerpc: Rework runlatch code" by myself --BenH ] CC: [v3.4+] Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h index 8e5fae8..46793b5 100644 --- a/arch/powerpc/include/asm/exception-64s.h +++ b/arch/powerpc/include/asm/exception-64s.h @@ -513,7 +513,7 @@ label##_common: \ */ #define STD_EXCEPTION_COMMON_ASYNC(trap, label, hdlr) \ EXCEPTION_COMMON(trap, label, hdlr, ret_from_except_lite, \ - FINISH_NAP;RUNLATCH_ON;DISABLE_INTS) + FINISH_NAP;DISABLE_INTS;RUNLATCH_ON) /* * When the idle code in power4_idle puts the CPU into NAP mode, diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index b0f3e3f..076d124 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -1369,7 +1369,7 @@ void show_stack(struct task_struct *tsk, unsigned long *stack) #ifdef CONFIG_PPC64 /* Called with hard IRQs off */ -void __ppc64_runlatch_on(void) +void notrace __ppc64_runlatch_on(void) { struct thread_info *ti = current_thread_info(); unsigned long ctrl; @@ -1382,7 +1382,7 @@ void __ppc64_runlatch_on(void) } /* Called with hard IRQs off */ -void __ppc64_runlatch_off(void) +void notrace __ppc64_runlatch_off(void) { struct thread_info *ti = current_thread_info(); unsigned long ctrl; -- cgit v0.10.2 From bf593907f7236e95698a76b7c7a2bbf8b1165327 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 14 Jun 2013 20:07:41 +1000 Subject: powerpc: Fix emulation of illegal instructions on PowerNV platform Normally, the kernel emulates a few instructions that are unimplemented on some processors (e.g. the old dcba instruction), or privileged (e.g. mfpvr). The emulation of unimplemented instructions is currently not working on the PowerNV platform. The reason is that on these machines, unimplemented and illegal instructions cause a hypervisor emulation assist interrupt, rather than a program interrupt as on older CPUs. Our vector for the emulation assist interrupt just calls program_check_exception() directly, without setting the bit in SRR1 that indicates an illegal instruction interrupt. This fixes it by making the emulation assist interrupt set that bit before calling program_check_interrupt(). With this, old programs that use no-longer implemented instructions such as dcba now work again. CC: Signed-off-by: Paul Mackerras Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index e783453..40e4a17 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -683,7 +683,7 @@ machine_check_common: STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception) STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception) STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception) - STD_EXCEPTION_COMMON(0xe40, emulation_assist, .program_check_exception) + STD_EXCEPTION_COMMON(0xe40, emulation_assist, .emulation_assist_interrupt) STD_EXCEPTION_COMMON(0xe60, hmi_exception, .unknown_exception) #ifdef CONFIG_PPC_DOORBELL STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, .doorbell_exception) diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index f18c79c..c0e5caf 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -1165,6 +1165,16 @@ bail: exception_exit(prev_state); } +/* + * This occurs when running in hypervisor mode on POWER6 or later + * and an illegal instruction is encountered. + */ +void __kprobes emulation_assist_interrupt(struct pt_regs *regs) +{ + regs->msr |= REASON_ILLEGAL; + program_check_exception(regs); +} + void alignment_exception(struct pt_regs *regs) { enum ctx_state prev_state = exception_enter(); -- cgit v0.10.2 From 230b3034793247f61e6a0b08c44cf415f6d92981 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 15 Jun 2013 12:13:40 +1000 Subject: powerpc: Fix missing/delayed calls to irq_work When replaying interrupts (as a result of the interrupt occurring while soft-disabled), in the case of the decrementer, we are exclusively testing for a pending timer target. However we also use decrementer interrupts to trigger the new "irq_work", which in this case would be missed. This change the logic to force a replay in both cases of a timer boundary reached and a decrementer interrupt having actually occurred while disabled. The former test is still useful to catch cases where a CPU having been hard-disabled for a long time completely misses the interrupt due to a decrementer rollover. CC: [v3.4+] Signed-off-by: Benjamin Herrenschmidt Tested-by: Steven Rostedt diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 5cbcf4d..ea185e0 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -162,7 +162,7 @@ notrace unsigned int __check_irq_replay(void) * in case we also had a rollover while hard disabled */ local_paca->irq_happened &= ~PACA_IRQ_DEC; - if (decrementer_check_overflow()) + if ((happened & PACA_IRQ_DEC) || decrementer_check_overflow()) return 0x900; /* Finally check if an external interrupt happened */ -- cgit v0.10.2 From f21afc25f9ed45b8ffe200d0f071b0caec3ed2ef Mon Sep 17 00:00:00 2001 From: David Daney Date: Fri, 14 Jun 2013 11:13:59 -0700 Subject: smp.h: Use local_irq_{save,restore}() in !SMP version of on_each_cpu(). Thanks to commit f91eb62f71b3 ("init: scream bloody murder if interrupts are enabled too early"), "bloody murder" is now being screamed. With a MIPS OCTEON config, we use on_each_cpu() in our irq_chip.irq_bus_sync_unlock() function. This gets called in early as a result of the time_init() call. Because the !SMP version of on_each_cpu() unconditionally enables irqs, we get: WARNING: at init/main.c:560 start_kernel+0x250/0x410() Interrupts were enabled early CPU: 0 PID: 0 Comm: swapper Not tainted 3.10.0-rc5-Cavium-Octeon+ #801 Call Trace: show_stack+0x68/0x80 warn_slowpath_common+0x78/0xb0 warn_slowpath_fmt+0x38/0x48 start_kernel+0x250/0x410 Suggested fix: Do what we already do in the SMP version of on_each_cpu(), and use local_irq_save/local_irq_restore. Because we need a flags variable, make it a static inline to avoid name space issues. [ Change from v1: Convert on_each_cpu to a static inline function, add #include to avoid build breakage on some files. on_each_cpu_mask() and on_each_cpu_cond() suffer the same problem as on_each_cpu(), but they are not causing !SMP bugs for me, so I will defer changing them to a less urgent patch. ] Signed-off-by: David Daney Cc: Ralf Baechle Cc: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/smp.h b/include/linux/smp.h index e6564c1..c848876 100644 --- a/include/linux/smp.h +++ b/include/linux/smp.h @@ -11,6 +11,7 @@ #include #include #include +#include extern void cpu_idle(void); @@ -139,13 +140,17 @@ static inline int up_smp_call_function(smp_call_func_t func, void *info) } #define smp_call_function(func, info, wait) \ (up_smp_call_function(func, info)) -#define on_each_cpu(func,info,wait) \ - ({ \ - local_irq_disable(); \ - func(info); \ - local_irq_enable(); \ - 0; \ - }) + +static inline int on_each_cpu(smp_call_func_t func, void *info, int wait) +{ + unsigned long flags; + + local_irq_save(flags); + func(info); + local_irq_restore(flags); + return 0; +} + /* * Note we still need to test the mask even for UP * because we actually can get an empty mask from -- cgit v0.10.2 From 3cb3f839d306443f3d1e79b0bde1a2ad2c12b555 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Sat, 15 Jun 2013 16:47:47 -0400 Subject: tilepro: work around module link error with gcc 4.7 gcc 4.7.x is emitting calls to __ffsdi2 where previously it used to inline the appropriate ctz instructions. While this needs to be fixed in gcc, it's also easy to avoid having it cause build failures when building with those compilers by exporting __ffsdi2 to modules. Signed-off-by: Chris Metcalf Cc: stable@kernel.org diff --git a/arch/tile/lib/exports.c b/arch/tile/lib/exports.c index 4385cb6..a93b02a 100644 --- a/arch/tile/lib/exports.c +++ b/arch/tile/lib/exports.c @@ -84,4 +84,6 @@ uint64_t __ashrdi3(uint64_t, unsigned int); EXPORT_SYMBOL(__ashrdi3); uint64_t __ashldi3(uint64_t, unsigned int); EXPORT_SYMBOL(__ashldi3); +int __ffsdi2(uint64_t); +EXPORT_SYMBOL(__ffsdi2); #endif -- cgit v0.10.2 From 7d132055814ef17a6c7b69f342244c410a5e000f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 15 Jun 2013 11:51:07 -1000 Subject: Linux 3.10-rc6 diff --git a/Makefile b/Makefile index 9040016..c6863b5 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 10 SUBLEVEL = 0 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Unicycling Gorilla # *DOCUMENTATION* -- cgit v0.10.2 From 8177a9d79c0e942dcac3312f15585d0344d505a5 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 16 Jun 2013 18:06:06 +0100 Subject: lseek(fd, n, SEEK_END) does *not* go to eof - n When you copy some code, you are supposed to read it. If nothing else, there's a chance to spot and fix an obvious bug instead of sharing it... X-Song: "I Got It From Agnes", by Tom Lehrer Signed-off-by: Al Viro [ Tom Lehrer? You're dating yourself, Al ] Signed-off-by: Linus Torvalds diff --git a/drivers/net/ethernet/brocade/bna/bnad_debugfs.c b/drivers/net/ethernet/brocade/bna/bnad_debugfs.c index 6e8bc9d..94d957d 100644 --- a/drivers/net/ethernet/brocade/bna/bnad_debugfs.c +++ b/drivers/net/ethernet/brocade/bna/bnad_debugfs.c @@ -244,7 +244,7 @@ bnad_debugfs_lseek(struct file *file, loff_t offset, int orig) file->f_pos += offset; break; case 2: - file->f_pos = debug->buffer_len - offset; + file->f_pos = debug->buffer_len + offset; break; default: return -EINVAL; diff --git a/drivers/scsi/bfa/bfad_debugfs.c b/drivers/scsi/bfa/bfad_debugfs.c index 439c012..b63d534 100644 --- a/drivers/scsi/bfa/bfad_debugfs.c +++ b/drivers/scsi/bfa/bfad_debugfs.c @@ -186,7 +186,7 @@ bfad_debugfs_lseek(struct file *file, loff_t offset, int orig) file->f_pos += offset; break; case 2: - file->f_pos = debug->buffer_len - offset; + file->f_pos = debug->buffer_len + offset; break; default: return -EINVAL; diff --git a/drivers/scsi/fnic/fnic_debugfs.c b/drivers/scsi/fnic/fnic_debugfs.c index adc1f7f..85e1ffd 100644 --- a/drivers/scsi/fnic/fnic_debugfs.c +++ b/drivers/scsi/fnic/fnic_debugfs.c @@ -174,7 +174,7 @@ static loff_t fnic_trace_debugfs_lseek(struct file *file, pos = file->f_pos + offset; break; case 2: - pos = fnic_dbg_prt->buffer_len - offset; + pos = fnic_dbg_prt->buffer_len + offset; } return (pos < 0 || pos > fnic_dbg_prt->buffer_len) ? -EINVAL : (file->f_pos = pos); diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index f63f5ff..f525ecb 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -1178,7 +1178,7 @@ lpfc_debugfs_lseek(struct file *file, loff_t off, int whence) pos = file->f_pos + off; break; case 2: - pos = debug->len - off; + pos = debug->len + off; } return (pos < 0 || pos > debug->len) ? -EINVAL : (file->f_pos = pos); } -- cgit v0.10.2 From ff49fad1d9bf2c49f52817b04cde8e4412434637 Mon Sep 17 00:00:00 2001 From: Jay Agarwal Date: Wed, 12 Jun 2013 12:43:43 +0530 Subject: ARM: tegra30: clocks: Fix pciex clock registration Registering pciex as peripheral clock instead of fixed clock as tegra_perih_reset_assert(deassert) api of this clock api gives warning and ultimately does not succeed to assert(deassert) Signed-off-by: Jay Agarwal Acked-by: Stephen Warren Signed-off-by: Mike Turquette diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c index c6921f5..ba99e38 100644 --- a/drivers/clk/tegra/clk-tegra30.c +++ b/drivers/clk/tegra/clk-tegra30.c @@ -1598,6 +1598,12 @@ static void __init tegra30_periph_clk_init(void) clk_register_clkdev(clk, "afi", "tegra-pcie"); clks[afi] = clk; + /* pciex */ + clk = tegra_clk_register_periph_gate("pciex", "pll_e", 0, clk_base, 0, + 74, &periph_u_regs, periph_clk_enb_refcnt); + clk_register_clkdev(clk, "pciex", "tegra-pcie"); + clks[pciex] = clk; + /* kfuse */ clk = tegra_clk_register_periph_gate("kfuse", "clk_m", TEGRA_PERIPH_ON_APB, @@ -1716,11 +1722,6 @@ static void __init tegra30_fixed_clk_init(void) 1, 0, &cml_lock); clk_register_clkdev(clk, "cml1", NULL); clks[cml1] = clk; - - /* pciex */ - clk = clk_register_fixed_rate(NULL, "pciex", "pll_e", 0, 100000000); - clk_register_clkdev(clk, "pciex", NULL); - clks[pciex] = clk; } static void __init tegra30_osc_clk_init(void) -- cgit v0.10.2 From d81bf8cf549f7a6656a64924672a42c101d17026 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Tue, 11 Jun 2013 11:06:48 +0200 Subject: ALSA: hda - Headset mic support for three more machines They need these quirks to have headset mic support. BugLink: https://bugs.launchpad.net/bugs/1189363 Tested-by: Shawn Wang Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 02e22b4..af9e71b 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3483,6 +3483,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x05ca, "Dell", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05cb, "Dell", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05de, "Dell", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1028, 0x05e0, "Dell", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05e9, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05ea, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05eb, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), @@ -3494,6 +3495,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x05f5, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05f6, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05f8, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1028, 0x0606, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1028, 0x0608, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x0609, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x103c, 0x1586, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC2), SND_PCI_QUIRK(0x103c, 0x18e6, "HP", ALC269_FIXUP_HP_GPIO_LED), -- cgit v0.10.2 From 342cda29343a6272c630f94ed56810a76740251b Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Sat, 15 Jun 2013 11:21:09 +0200 Subject: ALSA: usb-audio: work around Android accessory firmware bug When the Android firmware enables the audio interfaces in accessory mode, it always declares in the control interface's baInterfaceNr array that interfaces 0 and 1 belong to the audio function. However, the accessory interface itself, if also enabled, already is at index 0 and shifts the actual audio interface numbers to 1 and 2, which prevents the PCM streaming interface from being seen by the host driver. To get the PCM interface interface to work, detect when the descriptors point to the (for this driver useless) accessory interface, and redirect to the correct one. Reported-by: Jeremy Rosen Tested-by: Jeremy Rosen Cc: Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai diff --git a/sound/usb/card.c b/sound/usb/card.c index 1a03317..64952e2 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -147,14 +147,32 @@ static int snd_usb_create_stream(struct snd_usb_audio *chip, int ctrlif, int int return -EINVAL; } + alts = &iface->altsetting[0]; + altsd = get_iface_desc(alts); + + /* + * Android with both accessory and audio interfaces enabled gets the + * interface numbers wrong. + */ + if ((chip->usb_id == USB_ID(0x18d1, 0x2d04) || + chip->usb_id == USB_ID(0x18d1, 0x2d05)) && + interface == 0 && + altsd->bInterfaceClass == USB_CLASS_VENDOR_SPEC && + altsd->bInterfaceSubClass == USB_SUBCLASS_VENDOR_SPEC) { + interface = 2; + iface = usb_ifnum_to_if(dev, interface); + if (!iface) + return -EINVAL; + alts = &iface->altsetting[0]; + altsd = get_iface_desc(alts); + } + if (usb_interface_claimed(iface)) { snd_printdd(KERN_INFO "%d:%d:%d: skipping, already claimed\n", dev->devnum, ctrlif, interface); return -EINVAL; } - alts = &iface->altsetting[0]; - altsd = get_iface_desc(alts); if ((altsd->bInterfaceClass == USB_CLASS_AUDIO || altsd->bInterfaceClass == USB_CLASS_VENDOR_SPEC) && altsd->bInterfaceSubClass == USB_SUBCLASS_MIDISTREAMING) { -- cgit v0.10.2 From 6ab982e8cf8e5760da407ccdc4abc815bea23179 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 17 Jun 2013 10:19:49 +0200 Subject: ALSA: hda - Fix pin configurations for MacBook Air 4,2 MacBook Air 4,2 requires the whole default pin configuration table to be overridden by the driver, as usual, as Apple's machines don't set up properly after boot. Otherwise mic won't work, and other ill effect may happen. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59381 Reported-and-tested-by: Peter John Hartman Cc: [v3.9+] Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c index bd8d46c..cccaf9c 100644 --- a/sound/pci/hda/patch_cirrus.c +++ b/sound/pci/hda/patch_cirrus.c @@ -58,6 +58,7 @@ enum { CS420X_GPIO_23, CS420X_MBP101, CS420X_MBP81, + CS420X_MBA42, CS420X_AUTO, /* aliases */ CS420X_IMAC27_122 = CS420X_GPIO_23, @@ -346,6 +347,7 @@ static const struct hda_model_fixup cs420x_models[] = { { .id = CS420X_APPLE, .name = "apple" }, { .id = CS420X_MBP101, .name = "mbp101" }, { .id = CS420X_MBP81, .name = "mbp81" }, + { .id = CS420X_MBA42, .name = "mba42" }, {} }; @@ -361,6 +363,7 @@ static const struct snd_pci_quirk cs420x_fixup_tbl[] = { SND_PCI_QUIRK(0x106b, 0x1c00, "MacBookPro 8,1", CS420X_MBP81), SND_PCI_QUIRK(0x106b, 0x2000, "iMac 12,2", CS420X_IMAC27_122), SND_PCI_QUIRK(0x106b, 0x2800, "MacBookPro 10,1", CS420X_MBP101), + SND_PCI_QUIRK(0x106b, 0x5b00, "MacBookAir 4,2", CS420X_MBA42), SND_PCI_QUIRK_VENDOR(0x106b, "Apple", CS420X_APPLE), {} /* terminator */ }; @@ -414,6 +417,20 @@ static const struct hda_pintbl mbp101_pincfgs[] = { {} /* terminator */ }; +static const struct hda_pintbl mba42_pincfgs[] = { + { 0x09, 0x012b4030 }, /* HP */ + { 0x0a, 0x400000f0 }, + { 0x0b, 0x90100120 }, /* speaker */ + { 0x0c, 0x400000f0 }, + { 0x0d, 0x90a00110 }, /* mic */ + { 0x0e, 0x400000f0 }, + { 0x0f, 0x400000f0 }, + { 0x10, 0x400000f0 }, + { 0x12, 0x400000f0 }, + { 0x15, 0x400000f0 }, + {} /* terminator */ +}; + static void cs420x_fixup_gpio_13(struct hda_codec *codec, const struct hda_fixup *fix, int action) { @@ -482,6 +499,12 @@ static const struct hda_fixup cs420x_fixups[] = { .chained = true, .chain_id = CS420X_GPIO_13, }, + [CS420X_MBA42] = { + .type = HDA_FIXUP_PINS, + .v.pins = mba42_pincfgs, + .chained = true, + .chain_id = CS420X_GPIO_13, + }, }; static struct cs_spec *cs_alloc_spec(struct hda_codec *codec, int vendor_nid) -- cgit v0.10.2 From 36691e1be6ec551eef4a5225f126a281f8c051c2 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 17 Jun 2013 10:25:02 +0200 Subject: ALSA: usb-audio: Fix invalid volume resolution for Logitech HD Webcam c310 Just like the previous fix for LogitechHD Webcam c270 in commit 11e7064f35bb87da8f427d1aa4bbd8b7473a3993, c310 model also requires the same workaround for avoiding the kernel warning. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59741 Cc: Signed-off-by: Takashi Iwai diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index e5c7f9f..d543808 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -885,6 +885,7 @@ static void volume_control_quirks(struct usb_mixer_elem_info *cval, case USB_ID(0x046d, 0x0808): case USB_ID(0x046d, 0x0809): + case USB_ID(0x046d, 0x081b): /* HD Webcam c310 */ case USB_ID(0x046d, 0x081d): /* HD Webcam c510 */ case USB_ID(0x046d, 0x0825): /* HD Webcam c270 */ case USB_ID(0x046d, 0x0991): -- cgit v0.10.2 From e32aa85ab49203104019025eba83f03f88a3a0e3 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Mon, 17 Jun 2013 11:04:02 +0200 Subject: ALSA: hda - Add models for Dell headset jacks These headset jacks keep coming in on more and more platforms, and it's possible I don't catch them all. Make it easier to test and verify by making models. Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index bb8b0dc..77d68e2 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -29,6 +29,8 @@ ALC269/270/275/276/280/282 alc271-dmic Enable ALC271X digital mic workaround inv-dmic Inverted internal mic workaround lenovo-dock Enables docking station I/O for some Lenovos + dell-headset-multi Headset jack, which can also be used as mic-in + dell-headset-dock Headset jack (without mic-in), and also dock I/O ALC662/663/272 ============== @@ -42,6 +44,7 @@ ALC662/663/272 asus-mode7 ASUS asus-mode8 ASUS inv-dmic Inverted internal mic workaround + dell-headset-multi Headset jack, which can also be used as mic-in ALC680 ====== diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index af9e71b..403010c 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3599,6 +3599,8 @@ static const struct hda_model_fixup alc269_fixup_models[] = { {.id = ALC269_FIXUP_INV_DMIC, .name = "inv-dmic"}, {.id = ALC269_FIXUP_LENOVO_DOCK, .name = "lenovo-dock"}, {.id = ALC269_FIXUP_HP_GPIO_LED, .name = "hp-gpio-led"}, + {.id = ALC269_FIXUP_DELL1_MIC_NO_PRESENCE, .name = "dell-headset-multi"}, + {.id = ALC269_FIXUP_DELL2_MIC_NO_PRESENCE, .name = "dell-headset-dock"}, {} }; @@ -4278,6 +4280,7 @@ static const struct hda_model_fixup alc662_fixup_models[] = { {.id = ALC662_FIXUP_ASUS_MODE7, .name = "asus-mode7"}, {.id = ALC662_FIXUP_ASUS_MODE8, .name = "asus-mode8"}, {.id = ALC662_FIXUP_INV_DMIC, .name = "inv-dmic"}, + {.id = ALC668_FIXUP_DELL_MIC_NO_PRESENCE, .name = "dell-headset-multi"}, {} }; -- cgit v0.10.2 From 691557941af4c12bd307ad81a4d9fa9c7743ac28 Mon Sep 17 00:00:00 2001 From: Jon Medhurst Date: Fri, 7 Jun 2013 10:35:35 +0100 Subject: ARM: 7752/1: errata: LoUIS bit field in CLIDR register is incorrect On Cortex-A9 before version r1p0, the LoUIS bit field of the CLIDR register returns zero when it should return one. This leads to cache maintenance operations which rely on this value to not function as intended, causing data corruption. The workaround for this errata is to detect affected CPUs and correct the LoUIS value read. Acked-by: Will Deacon Acked-by: Nicolas Pitre Cc: stable@vger.kernel.org Signed-off-by: Jon Medhurst Signed-off-by: Russell King diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 49d993c..239fa96 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1189,6 +1189,16 @@ config PL310_ERRATA_588369 is not correctly implemented in PL310 as clean lines are not invalidated as a result of these operations. +config ARM_ERRATA_643719 + bool "ARM errata: LoUIS bit field in CLIDR register is incorrect" + depends on CPU_V7 && SMP + help + This option enables the workaround for the 643719 Cortex-A9 (prior to + r1p0) erratum. On affected cores the LoUIS bit field of the CLIDR + register returns zero when it should return one. The workaround + corrects this value, ensuring cache maintenance operations which use + it behave as intended and avoiding data corruption. + config ARM_ERRATA_720789 bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID" depends on CPU_V7 diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 15451ee..515b000 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -92,6 +92,14 @@ ENTRY(v7_flush_dcache_louis) mrc p15, 1, r0, c0, c0, 1 @ read clidr, r0 = clidr ALT_SMP(ands r3, r0, #(7 << 21)) @ extract LoUIS from clidr ALT_UP(ands r3, r0, #(7 << 27)) @ extract LoUU from clidr +#ifdef CONFIG_ARM_ERRATA_643719 + ALT_SMP(mrceq p15, 0, r2, c0, c0, 0) @ read main ID register + ALT_UP(moveq pc, lr) @ LoUU is zero, so nothing to do + ldreq r1, =0x410fc090 @ ID of ARM Cortex A9 r0p? + biceq r2, r2, #0x0000000f @ clear minor revision number + teqeq r2, r1 @ test for errata affected core and if so... + orreqs r3, #(1 << 21) @ fix LoUIS value (and set flags state to 'ne') +#endif ALT_SMP(mov r3, r3, lsr #20) @ r3 = LoUIS * 2 ALT_UP(mov r3, r3, lsr #26) @ r3 = LoUU * 2 moveq pc, lr @ return if level == 0 -- cgit v0.10.2 From 37468b30a3948bbbdf9d664678f611510d987e65 Mon Sep 17 00:00:00 2001 From: Po-Yu Chuang Date: Fri, 7 Jun 2013 12:15:45 +0100 Subject: ARM: 7753/1: map_init_section flushes incorrect pmd This bug was introduced in commit e651eab0. Some v4/v5 platforms failed to boot due to this. Signed-off-by: Po-Yu Chuang Signed-off-by: Russell King diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index e0d8565..4d409e6 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -616,10 +616,12 @@ static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr, } while (pte++, addr += PAGE_SIZE, addr != end); } -static void __init map_init_section(pmd_t *pmd, unsigned long addr, +static void __init __map_init_section(pmd_t *pmd, unsigned long addr, unsigned long end, phys_addr_t phys, const struct mem_type *type) { + pmd_t *p = pmd; + #ifndef CONFIG_ARM_LPAE /* * In classic MMU format, puds and pmds are folded in to @@ -638,7 +640,7 @@ static void __init map_init_section(pmd_t *pmd, unsigned long addr, phys += SECTION_SIZE; } while (pmd++, addr += SECTION_SIZE, addr != end); - flush_pmd_entry(pmd); + flush_pmd_entry(p); } static void __init alloc_init_pmd(pud_t *pud, unsigned long addr, @@ -661,7 +663,7 @@ static void __init alloc_init_pmd(pud_t *pud, unsigned long addr, */ if (type->prot_sect && ((addr | next | phys) & ~SECTION_MASK) == 0) { - map_init_section(pmd, addr, next, phys, type); + __map_init_section(pmd, addr, next, phys, type); } else { alloc_init_pte(pmd, addr, next, __phys_to_pfn(phys), type); -- cgit v0.10.2 From 049be07053ebbf0ee8543caea23ae7bdf0765bb2 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Mon, 10 Jun 2013 18:05:51 +0100 Subject: ARM: 7754/1: Fix the CPU ID and the mask associated to the PJ4B This commit fixes the ID and mask for the PJ4B which was too restrictive and didn't match the CPU of the Armada 370 SoC. Signed-off-by: Gregory CLEMENT Reviewed-by: Will Deacon Cc: Signed-off-by: Russell King diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 2c73a73..4c8c9c1 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -409,8 +409,8 @@ __v7_ca9mp_proc_info: */ .type __v7_pj4b_proc_info, #object __v7_pj4b_proc_info: - .long 0x562f5840 - .long 0xfffffff0 + .long 0x560f5800 + .long 0xff0fff00 __v7_proc __v7_pj4b_setup .size __v7_pj4b_proc_info, . - __v7_pj4b_proc_info -- cgit v0.10.2 From 1bc39742aab09248169ef9d3727c9def3528b3f3 Mon Sep 17 00:00:00 2001 From: Simon Baatz Date: Mon, 10 Jun 2013 21:10:12 +0100 Subject: ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page Commit f8b63c1 made flush_kernel_dcache_page a no-op assuming that the pages it needs to handle are kernel mapped only. However, for example when doing direct I/O, pages with user space mappings may occur. Thus, continue to do lazy flushing if there are no user space mappings. Otherwise, flush the kernel cache lines directly. Signed-off-by: Simon Baatz Reviewed-by: Catalin Marinas Cc: # 3.2+ Signed-off-by: Russell King diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index bff7138..17d0ae8 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -320,9 +320,7 @@ static inline void flush_anon_page(struct vm_area_struct *vma, } #define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE -static inline void flush_kernel_dcache_page(struct page *page) -{ -} +extern void flush_kernel_dcache_page(struct page *); #define flush_dcache_mmap_lock(mapping) \ spin_lock_irq(&(mapping)->tree_lock) diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 0d473cc..32aa586 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -301,6 +301,39 @@ void flush_dcache_page(struct page *page) EXPORT_SYMBOL(flush_dcache_page); /* + * Ensure cache coherency for the kernel mapping of this page. We can + * assume that the page is pinned via kmap. + * + * If the page only exists in the page cache and there are no user + * space mappings, this is a no-op since the page was already marked + * dirty at creation. Otherwise, we need to flush the dirty kernel + * cache lines directly. + */ +void flush_kernel_dcache_page(struct page *page) +{ + if (cache_is_vivt() || cache_is_vipt_aliasing()) { + struct address_space *mapping; + + mapping = page_mapping(page); + + if (!mapping || mapping_mapped(mapping)) { + void *addr; + + addr = page_address(page); + /* + * kmap_atomic() doesn't set the page virtual + * address for highmem pages, and + * kunmap_atomic() takes care of cache + * flushing already. + */ + if (!IS_ENABLED(CONFIG_HIGHMEM) || addr) + __cpuc_flush_dcache_area(addr, PAGE_SIZE); + } + } +} +EXPORT_SYMBOL(flush_kernel_dcache_page); + +/* * Flush an anonymous page so that users of get_user_pages() * can safely access the data. The expected sequence is: * -- cgit v0.10.2 From 69f91ff8c93c778cb65b71d9b2d95ff62956354f Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 12 Jun 2013 10:56:43 +0100 Subject: ARM: 7756/1: zImage/virt: remove hyp-stub.S during distclean Make sure hyp-stub.S gets removed during make distclean, this left over file was introduced in commit: 424e599 ARM: zImage/virt: hyp mode entry support for the zImage loader Signed-off-by: Magnus Damm Acked-by: Dave Martin Reviewed-by: Simon Horman Signed-off-by: Russell King diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 79e9bdb..120b83b 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -116,7 +116,8 @@ targets := vmlinux vmlinux.lds \ # Make sure files are removed during clean extra-y += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern \ - lib1funcs.S ashldi3.S $(libfdt) $(libfdt_hdrs) + lib1funcs.S ashldi3.S $(libfdt) $(libfdt_hdrs) \ + hyp-stub.S ifeq ($(CONFIG_FUNCTION_TRACER),y) ORIG_CFLAGS := $(KBUILD_CFLAGS) -- cgit v0.10.2 From 0abb6aeacc20822cd7baee82fd3b61169ca3f32e Mon Sep 17 00:00:00 2001 From: Padmavathi Venna Date: Wed, 12 Jun 2013 13:53:44 +0530 Subject: ARM: dts: Correct the base address of pinctrl_3 on Exynos5250 This patch corrects the base address of pinctrl_3 on Exynos5250 platform. Signed-off-by: Padmavathi Venna Acked-by: Kukjin Kim Signed-off-by: Olof Johansson diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi index d1650fb..ded558b 100644 --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -763,7 +763,7 @@ }; }; - pinctrl@03680000 { + pinctrl@03860000 { gpz: gpz { gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 0673524..fc9fb3d 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -161,9 +161,9 @@ interrupts = <0 50 0>; }; - pinctrl_3: pinctrl@03680000 { + pinctrl_3: pinctrl@03860000 { compatible = "samsung,exynos5250-pinctrl"; - reg = <0x0368000 0x1000>; + reg = <0x03860000 0x1000>; interrupts = <0 47 0>; }; -- cgit v0.10.2 From a908eb9936ba06678720226feed891d01827066f Mon Sep 17 00:00:00 2001 From: Gianluca Gennari Date: Sun, 2 Jun 2013 17:24:24 -0300 Subject: [media] rtl28xxu: fix buffer overflow when probing Rafael Micro r820t tuner As suggested by Antti, this patch replaces: https://patchwork.kernel.org/patch/2649861/ The buffer overflow is fixed by reading only the r820t ID register. Signed-off-by: Gianluca Gennari Acked-by: Antti Palosaari Reviewed-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c index 22015fe..2cc8ec7 100644 --- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c +++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c @@ -376,7 +376,7 @@ static int rtl2832u_read_config(struct dvb_usb_device *d) struct rtl28xxu_req req_mxl5007t = {0xd9c0, CMD_I2C_RD, 1, buf}; struct rtl28xxu_req req_e4000 = {0x02c8, CMD_I2C_RD, 1, buf}; struct rtl28xxu_req req_tda18272 = {0x00c0, CMD_I2C_RD, 2, buf}; - struct rtl28xxu_req req_r820t = {0x0034, CMD_I2C_RD, 5, buf}; + struct rtl28xxu_req req_r820t = {0x0034, CMD_I2C_RD, 1, buf}; dev_dbg(&d->udev->dev, "%s:\n", __func__); @@ -481,9 +481,9 @@ static int rtl2832u_read_config(struct dvb_usb_device *d) goto found; } - /* check R820T by reading tuner stats at I2C addr 0x1a */ + /* check R820T ID register; reg=00 val=69 */ ret = rtl28xxu_ctrl_msg(d, &req_r820t); - if (ret == 0) { + if (ret == 0 && buf[0] == 0x69) { priv->tuner = TUNER_RTL2832_R820T; priv->tuner_name = "R820T"; goto found; -- cgit v0.10.2 From ef223fb3d1d61c2a95a89cdc02f8e86dac96ddc3 Mon Sep 17 00:00:00 2001 From: Ross Lagerwall Date: Fri, 14 Jun 2013 23:24:25 +0100 Subject: tty/vt: Return EBUSY if deallocating VT1 and it is busy Commit 421b40a6286e ("tty/vt: Fix vc_deallocate() lock order") changed the behavior when deallocating VT 1. Previously if trying to deallocate VT1 and it is busy, we would return EBUSY. The commit changed this to return 0 (success). This commit restores the old behavior. Signed-off-by: Ross Lagerwall Tested-by: Mikael Pettersson Acked-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index fc2c06c..2bd78e2 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -289,13 +289,10 @@ static int vt_disallocate(unsigned int vc_num) struct vc_data *vc = NULL; int ret = 0; - if (!vc_num) - return 0; - console_lock(); if (VT_BUSY(vc_num)) ret = -EBUSY; - else + else if (vc_num) vc = vc_deallocate(vc_num); console_unlock(); -- cgit v0.10.2 From 7c61c3d8f44d5d822f758754287af644307b4af9 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Thu, 13 Jun 2013 15:56:37 -0400 Subject: tty: Fix transient pty write() EIO Commit 699390354da6c258b65bf8fa79cfd5feaede50b6 ('pty: Ignore slave pty close() if never successfully opened') introduced a bug with ptys whereby a write() in parallel with an open() on an existing pty could mistakenly indicate an I/O error. Only indicate an I/O error if the condition on open() actually exists. Reported-by: Markus Trippelsdorf Signed-off-by: Peter Hurley Tested-by: Mikael Pettersson Cc: stable # 3.9 Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index 59bfaec..abfd990 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -244,14 +244,9 @@ static void pty_flush_buffer(struct tty_struct *tty) static int pty_open(struct tty_struct *tty, struct file *filp) { - int retval = -ENODEV; - if (!tty || !tty->link) - goto out; - - set_bit(TTY_IO_ERROR, &tty->flags); + return -ENODEV; - retval = -EIO; if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) goto out; if (test_bit(TTY_PTY_LOCK, &tty->link->flags)) @@ -262,9 +257,11 @@ static int pty_open(struct tty_struct *tty, struct file *filp) clear_bit(TTY_IO_ERROR, &tty->flags); clear_bit(TTY_OTHER_CLOSED, &tty->link->flags); set_bit(TTY_THROTTLED, &tty->flags); - retval = 0; + return 0; + out: - return retval; + set_bit(TTY_IO_ERROR, &tty->flags); + return -EIO; } static void pty_set_termios(struct tty_struct *tty, -- cgit v0.10.2 From 19ab428f4b7988ef3ac727c680efc193ef53ce14 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 14 Jun 2013 16:14:14 +0100 Subject: ARM: 7759/1: decouple CPU offlining from reboot/shutdown Add comments to machine_shutdown()/halt()/power_off()/restart() that describe their purpose and/or requirements re: CPUs being active/not. In machine_shutdown(), replace the call to smp_send_stop() with a call to disable_nonboot_cpus(). This completely disables all but one CPU, thus satisfying the requirement that only a single CPU be active for kexec. Adjust Kconfig dependencies for this change. In machine_halt()/power_off()/restart(), call smp_send_stop() directly, rather than via machine_shutdown(); these functions don't need to completely de-activate all CPUs using hotplug, but rather just quiesce them. Remove smp_kill_cpus(), and its call from smp_send_stop(). smp_kill_cpus() was indirectly calling smp_ops.cpu_kill() without calling smp_ops.cpu_die() on the target CPUs first. At least some implementations of smp_ops had issues with this; it caused cpu_kill() to hang on Tegra, for example. Since smp_send_stop() is only used for shutdown, halt, and power-off, there is no need to attempt any kind of CPU hotplug here. Adjust Kconfig to reflect that machine_shutdown() (and hence kexec) relies upon disable_nonboot_cpus(). However, this alone doesn't guarantee that hotplug will work, or even that hotplug is implemented for a particular piece of HW that a multi-platform zImage runs on. Hence, add error-checking to machine_kexec() to determine whether it did work. Suggested-by: Russell King Signed-off-by: Stephen Warren Acked-by: Will Deacon Tested-by: Zhangfei Gao Signed-off-by: Russell King diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 239fa96..2651b1d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -2016,7 +2016,7 @@ config XIP_PHYS_ADDR config KEXEC bool "Kexec system call (EXPERIMENTAL)" - depends on (!SMP || HOTPLUG_CPU) + depends on (!SMP || PM_SLEEP_SMP) help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index 8ef8c93..4fb074c 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -134,6 +134,10 @@ void machine_kexec(struct kimage *image) unsigned long reboot_code_buffer_phys; void *reboot_code_buffer; + if (num_online_cpus() > 1) { + pr_err("kexec: error: multiple CPUs still online\n"); + return; + } page_list = image->head & PAGE_MASK; diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 282de48..6e8931c 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -184,30 +184,61 @@ int __init reboot_setup(char *str) __setup("reboot=", reboot_setup); +/* + * Called by kexec, immediately prior to machine_kexec(). + * + * This must completely disable all secondary CPUs; simply causing those CPUs + * to execute e.g. a RAM-based pin loop is not sufficient. This allows the + * kexec'd kernel to use any and all RAM as it sees fit, without having to + * avoid any code or data used by any SW CPU pin loop. The CPU hotplug + * functionality embodied in disable_nonboot_cpus() to achieve this. + */ void machine_shutdown(void) { -#ifdef CONFIG_SMP - smp_send_stop(); -#endif + disable_nonboot_cpus(); } +/* + * Halting simply requires that the secondary CPUs stop performing any + * activity (executing tasks, handling interrupts). smp_send_stop() + * achieves this. + */ void machine_halt(void) { - machine_shutdown(); + smp_send_stop(); + local_irq_disable(); while (1); } +/* + * Power-off simply requires that the secondary CPUs stop performing any + * activity (executing tasks, handling interrupts). smp_send_stop() + * achieves this. When the system power is turned off, it will take all CPUs + * with it. + */ void machine_power_off(void) { - machine_shutdown(); + smp_send_stop(); + if (pm_power_off) pm_power_off(); } +/* + * Restart requires that the secondary CPUs stop performing any activity + * while the primary CPU resets the system. Systems with a single CPU can + * use soft_restart() as their machine descriptor's .restart hook, since that + * will cause the only available CPU to reset. Systems with multiple CPUs must + * provide a HW restart implementation, to ensure that all CPUs reset at once. + * This is required so that any code running after reset on the primary CPU + * doesn't have to co-ordinate with other CPUs to ensure they aren't still + * executing pre-reset code, and using RAM that the primary CPU's code wishes + * to use. Implementing such co-ordination would be essentially impossible. + */ void machine_restart(char *cmd) { - machine_shutdown(); + smp_send_stop(); arm_pm_restart(reboot_mode, cmd); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 550d63c..5919eb4 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -651,17 +651,6 @@ void smp_send_reschedule(int cpu) smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE); } -#ifdef CONFIG_HOTPLUG_CPU -static void smp_kill_cpus(cpumask_t *mask) -{ - unsigned int cpu; - for_each_cpu(cpu, mask) - platform_cpu_kill(cpu); -} -#else -static void smp_kill_cpus(cpumask_t *mask) { } -#endif - void smp_send_stop(void) { unsigned long timeout; @@ -679,8 +668,6 @@ void smp_send_stop(void) if (num_online_cpus() > 1) pr_warning("SMP: failed to stop secondary CPUs\n"); - - smp_kill_cpus(&mask); } /* -- cgit v0.10.2 From f75773103d24faaa75323597c2804edfb4a48a52 Mon Sep 17 00:00:00 2001 From: David Daney Date: Sun, 16 Jun 2013 13:06:28 -0700 Subject: [IA64] Fix include dependency in asm/irqflags.h asm/kregs.h isn't always included first, so we need an explicit include. [Fix build breakage introduced by f21afc25f9ed45b8ffe200d0f071b0caec3ed2ef smp.h: Use local_irq_{save,restore}() in !SMP version of on_each_cpu().] Signed-off-by: David Daney Acked-by: Geert Uytterhoeven Signed-off-by: Tony Luck diff --git a/arch/ia64/include/asm/irqflags.h b/arch/ia64/include/asm/irqflags.h index 1bf2cf2..cec6c06 100644 --- a/arch/ia64/include/asm/irqflags.h +++ b/arch/ia64/include/asm/irqflags.h @@ -11,6 +11,7 @@ #define _ASM_IA64_IRQFLAGS_H #include +#include #ifdef CONFIG_IA64_DEBUG_IRQ extern unsigned long last_cli_ip; -- cgit v0.10.2 From 764bcbc5a6d7a2f3e75c9f0e4caa984e2926e346 Mon Sep 17 00:00:00 2001 From: "Zhanghaoyu (A)" Date: Fri, 14 Jun 2013 07:36:13 +0000 Subject: KVM: x86: remove vcpu's CPL check in host-invoked XCR set __kvm_set_xcr function does the CPL check when set xcr. __kvm_set_xcr is called in two flows, one is invoked by guest, call stack shown as below, handle_xsetbv(or xsetbv_interception) kvm_set_xcr __kvm_set_xcr the other one is invoked by host, for example during system reset: kvm_arch_vcpu_ioctl kvm_vcpu_ioctl_x86_set_xcrs __kvm_set_xcr The former does need the CPL check, but the latter does not. Cc: stable@vger.kernel.org Signed-off-by: Zhang Haoyu [Tweaks to commit message. - Paolo] Signed-off-by: Paolo Bonzini diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 094b5d9..e8ba99c 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -582,8 +582,6 @@ int __kvm_set_xcr(struct kvm_vcpu *vcpu, u32 index, u64 xcr) if (index != XCR_XFEATURE_ENABLED_MASK) return 1; xcr0 = xcr; - if (kvm_x86_ops->get_cpl(vcpu) != 0) - return 1; if (!(xcr0 & XSTATE_FP)) return 1; if ((xcr0 & XSTATE_YMM) && !(xcr0 & XSTATE_SSE)) @@ -597,7 +595,8 @@ int __kvm_set_xcr(struct kvm_vcpu *vcpu, u32 index, u64 xcr) int kvm_set_xcr(struct kvm_vcpu *vcpu, u32 index, u64 xcr) { - if (__kvm_set_xcr(vcpu, index, xcr)) { + if (kvm_x86_ops->get_cpl(vcpu) != 0 || + __kvm_set_xcr(vcpu, index, xcr)) { kvm_inject_gp(vcpu, 0); return 1; } -- cgit v0.10.2 From d8d386c10630d8f7837700f4c466443d49e12cc0 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 13 Jun 2013 13:17:01 -0700 Subject: x86, mtrr: Fix original mtrr range get for mtrr_cleanup Joshua reported: Commit cd7b304dfaf1 (x86, range: fix missing merge during add range) broke mtrr cleanup on his setup in 3.9.5. corresponding commit in upstream is fbe06b7bae7c. *BAD*gran_size: 64K chunk_size: 16M num_reg: 6 lose cover RAM: -0G https://bugzilla.kernel.org/show_bug.cgi?id=59491 So it rejects new var mtrr layout. It turns out we have some problem with initial mtrr range retrieval. The current sequence is: x86_get_mtrr_mem_range ==> bunchs of add_range_with_merge ==> bunchs of subract_range ==> clean_sort_range add_range_with_merge for [0,1M) sort_range() add_range_with_merge could have blank slots, so we can not just sort only, that will have final result have extra blank slot in head. So move that calling add_range_with_merge for [0,1M), with that we could avoid extra clean_sort_range calling. Reported-by: Joshua Covington Tested-by: Joshua Covington Signed-off-by: Yinghai Lu Link: http://lkml.kernel.org/r/1371154622-8929-2-git-send-email-yinghai@kernel.org Cc: v3.9 Signed-off-by: H. Peter Anvin diff --git a/arch/x86/kernel/cpu/mtrr/cleanup.c b/arch/x86/kernel/cpu/mtrr/cleanup.c index 35ffda5..5f90b85 100644 --- a/arch/x86/kernel/cpu/mtrr/cleanup.c +++ b/arch/x86/kernel/cpu/mtrr/cleanup.c @@ -714,15 +714,15 @@ int __init mtrr_cleanup(unsigned address_bits) if (mtrr_tom2) x_remove_size = (mtrr_tom2 >> PAGE_SHIFT) - x_remove_base; - nr_range = x86_get_mtrr_mem_range(range, 0, x_remove_base, x_remove_size); /* * [0, 1M) should always be covered by var mtrr with WB * and fixed mtrrs should take effect before var mtrr for it: */ - nr_range = add_range_with_merge(range, RANGE_NUM, nr_range, 0, + nr_range = add_range_with_merge(range, RANGE_NUM, 0, 0, 1ULL<<(20 - PAGE_SHIFT)); - /* Sort the ranges: */ - sort_range(range, nr_range); + /* add from var mtrr at last */ + nr_range = x86_get_mtrr_mem_range(range, nr_range, + x_remove_base, x_remove_size); range_sums = sum_ranges(range, nr_range); printk(KERN_INFO "total RAM covered: %ldM\n", -- cgit v0.10.2 From 0541881502a1276149889fe468662ff6a8fc8f6d Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 13 Jun 2013 13:17:02 -0700 Subject: range: Do not add new blank slot with add_range_with_merge Joshua reported: Commit cd7b304dfaf1 (x86, range: fix missing merge during add range) broke mtrr cleanup on his setup in 3.9.5. corresponding commit in upstream is fbe06b7bae7c. The reason is add_range_with_merge could generate blank spot. We could avoid that by searching new expanded start/end, that new range should include all connected ranges in range array. At last add the new expanded start/end to the range array. Also move up left array so do not add new blank slot in the range array. -v2: move left array to avoid enhance add_range() -v3: include fix from Joshua about memmove declaring when DYN_DEBUG is used. Reported-by: Joshua Covington Tested-by: Joshua Covington Signed-off-by: Yinghai Lu Link: http://lkml.kernel.org/r/1371154622-8929-3-git-send-email-yinghai@kernel.org Cc: v3.9 Signed-off-by: H. Peter Anvin diff --git a/kernel/range.c b/kernel/range.c index eb911db..322ea8e 100644 --- a/kernel/range.c +++ b/kernel/range.c @@ -4,7 +4,7 @@ #include #include #include - +#include #include int add_range(struct range *range, int az, int nr_range, u64 start, u64 end) @@ -32,9 +32,8 @@ int add_range_with_merge(struct range *range, int az, int nr_range, if (start >= end) return nr_range; - /* Try to merge it with old one: */ + /* get new start/end: */ for (i = 0; i < nr_range; i++) { - u64 final_start, final_end; u64 common_start, common_end; if (!range[i].end) @@ -45,14 +44,16 @@ int add_range_with_merge(struct range *range, int az, int nr_range, if (common_start > common_end) continue; - final_start = min(range[i].start, start); - final_end = max(range[i].end, end); + /* new start/end, will add it back at last */ + start = min(range[i].start, start); + end = max(range[i].end, end); - /* clear it and add it back for further merge */ - range[i].start = 0; - range[i].end = 0; - return add_range_with_merge(range, az, nr_range, - final_start, final_end); + memmove(&range[i], &range[i + 1], + (nr_range - (i + 1)) * sizeof(range[i])); + range[nr_range - 1].start = 0; + range[nr_range - 1].end = 0; + nr_range--; + i--; } /* Need to add it: */ -- cgit v0.10.2 From 035978beaf79e3bd0c4f6308e8c8ce5067e26b9d Mon Sep 17 00:00:00 2001 From: George Spelvin Date: Mon, 17 Jun 2013 01:45:50 -0400 Subject: usb: phy: Improve Kconfig help for CONFIG_USB_PHY The previous text confused users by not describing the very common (e.g. x86 PC) sitations where no PHY driver is necessary. Signed-off-by: George Spelvin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 7ef3eb8..2311b1e 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -4,11 +4,17 @@ menuconfig USB_PHY bool "USB Physical Layer drivers" help - USB controllers (those which are host, device or DRD) need a - device to handle the physical layer signalling, commonly called - a PHY. + Most USB controllers have the physical layer signalling part + (commonly called a PHY) built in. However, dual-role devices + (a.k.a. USB on-the-go) which support being USB master or slave + with the same connector often use an external PHY. - The following drivers add support for such PHY devices. + The drivers in this submenu add support for such PHY devices. + They are not needed for standard master-only (or the vast + majority of slave-only) USB interfaces. + + If you're not sure if this applies to you, it probably doesn't; + say N here. if USB_PHY -- cgit v0.10.2 From 875979368eb4cfecff9f0e97625b90cc6009269d Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Sat, 15 Jun 2013 16:36:38 +0800 Subject: firmware loader: fix use-after-free by double abort fw_priv->buf is accessed in both request_firmware_load() and writing to sysfs file of 'loading' context, but not protected by 'fw_lock' entirely. The patch makes sure that access on 'fw_priv->buf' is protected by the lock. So fixes the double abort problem reported by nirinA raseliarison: http://lkml.org/lkml/2013/6/14/188 Reported-and-tested-by: nirinA raseliarison Cc: Guenter Roeck Cc: Bjorn Helgaas Cc: stable # 3.9 Signed-off-by: Ming Lei Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c index 4b1f926..01e2103 100644 --- a/drivers/base/firmware_class.c +++ b/drivers/base/firmware_class.c @@ -450,8 +450,18 @@ static void fw_load_abort(struct firmware_priv *fw_priv) { struct firmware_buf *buf = fw_priv->buf; + /* + * There is a small window in which user can write to 'loading' + * between loading done and disappearance of 'loading' + */ + if (test_bit(FW_STATUS_DONE, &buf->status)) + return; + set_bit(FW_STATUS_ABORT, &buf->status); complete_all(&buf->completion); + + /* avoid user action after loading abort */ + fw_priv->buf = NULL; } #define is_fw_load_aborted(buf) \ @@ -528,7 +538,12 @@ static ssize_t firmware_loading_show(struct device *dev, struct device_attribute *attr, char *buf) { struct firmware_priv *fw_priv = to_firmware_priv(dev); - int loading = test_bit(FW_STATUS_LOADING, &fw_priv->buf->status); + int loading = 0; + + mutex_lock(&fw_lock); + if (fw_priv->buf) + loading = test_bit(FW_STATUS_LOADING, &fw_priv->buf->status); + mutex_unlock(&fw_lock); return sprintf(buf, "%d\n", loading); } @@ -570,12 +585,12 @@ static ssize_t firmware_loading_store(struct device *dev, const char *buf, size_t count) { struct firmware_priv *fw_priv = to_firmware_priv(dev); - struct firmware_buf *fw_buf = fw_priv->buf; + struct firmware_buf *fw_buf; int loading = simple_strtol(buf, NULL, 10); int i; mutex_lock(&fw_lock); - + fw_buf = fw_priv->buf; if (!fw_buf) goto out; @@ -777,10 +792,6 @@ static void firmware_class_timeout_work(struct work_struct *work) struct firmware_priv, timeout_work.work); mutex_lock(&fw_lock); - if (test_bit(FW_STATUS_DONE, &(fw_priv->buf->status))) { - mutex_unlock(&fw_lock); - return; - } fw_load_abort(fw_priv); mutex_unlock(&fw_lock); } @@ -861,8 +872,6 @@ static int _request_firmware_load(struct firmware_priv *fw_priv, bool uevent, cancel_delayed_work_sync(&fw_priv->timeout_work); - fw_priv->buf = NULL; - device_remove_file(f_dev, &dev_attr_loading); err_del_bin_attr: device_remove_bin_file(f_dev, &firmware_attr_data); -- cgit v0.10.2 From 91ea8207168793b365322be3c90a4ee9e8b03ed4 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Wed, 5 Jun 2013 20:50:01 +0000 Subject: parisc: fix kernel BUG at arch/parisc/include/asm/mmzone.h:50 (part 2) Make sure that we really return -1 (instead of 0x00ff) as node id for page frame numbers which are not physically available. This finally fixes the kernel panic when running cat /proc/kpageflags /proc/kpagecount. Theoretically this patch now limits the number of physical memory ranges to 127 instead of 254, but currently we have MAX_PHYSMEM_RANGES hardcoded to 8 which is sufficient for all existing parisc machines. Signed-off-by: Helge Deller diff --git a/arch/parisc/include/asm/mmzone.h b/arch/parisc/include/asm/mmzone.h index cc50d33..b6b34a0 100644 --- a/arch/parisc/include/asm/mmzone.h +++ b/arch/parisc/include/asm/mmzone.h @@ -27,7 +27,7 @@ extern struct node_map_data node_data[]; #define PFNNID_SHIFT (30 - PAGE_SHIFT) #define PFNNID_MAP_MAX 512 /* support 512GB */ -extern unsigned char pfnnid_map[PFNNID_MAP_MAX]; +extern signed char pfnnid_map[PFNNID_MAP_MAX]; #ifndef CONFIG_64BIT #define pfn_is_io(pfn) ((pfn & (0xf0000000UL >> PAGE_SHIFT)) == (0xf0000000UL >> PAGE_SHIFT)) @@ -46,7 +46,7 @@ static inline int pfn_to_nid(unsigned long pfn) i = pfn >> PFNNID_SHIFT; BUG_ON(i >= ARRAY_SIZE(pfnnid_map)); - return (int)pfnnid_map[i]; + return pfnnid_map[i]; } static inline int pfn_valid(int pfn) diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index 1c96564..505b56c 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -47,7 +47,7 @@ pte_t pg0[PT_INITIAL * PTRS_PER_PTE] __attribute__ ((__section__ (".data..vm0.pt #ifdef CONFIG_DISCONTIGMEM struct node_map_data node_data[MAX_NUMNODES] __read_mostly; -unsigned char pfnnid_map[PFNNID_MAP_MAX] __read_mostly; +signed char pfnnid_map[PFNNID_MAP_MAX] __read_mostly; #endif static struct resource data_resource = { -- cgit v0.10.2 From 9a66d1869d90f13fbaf83dcce5b1aeec86fbc699 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Sun, 9 Jun 2013 23:00:21 +0200 Subject: parisc: fix serial ports on C8000 workstation The C8000 workstation (64 bit kernel only) has a somewhat different serial port configuration than other models. Thomas Bogendoerfer sent a patch to fix this in September 2010, which was now minimally modified by me. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Helge Deller diff --git a/arch/parisc/kernel/hardware.c b/arch/parisc/kernel/hardware.c index 9e2d2e4..8722756 100644 --- a/arch/parisc/kernel/hardware.c +++ b/arch/parisc/kernel/hardware.c @@ -1205,6 +1205,7 @@ static struct hp_hardware hp_hardware_list[] = { {HPHW_FIO, 0x004, 0x00320, 0x0, "Metheus Frame Buffer"}, {HPHW_FIO, 0x004, 0x00340, 0x0, "BARCO CX4500 VME Grphx Cnsl"}, {HPHW_FIO, 0x004, 0x00360, 0x0, "Hughes TOG VME FDDI"}, + {HPHW_FIO, 0x076, 0x000AD, 0x00, "Crestone Peak RS-232"}, {HPHW_IOA, 0x185, 0x0000B, 0x00, "Java BC Summit Port"}, {HPHW_IOA, 0x1FF, 0x0000B, 0x00, "Hitachi Ghostview Summit Port"}, {HPHW_IOA, 0x580, 0x0000B, 0x10, "U2-IOA BC Runway Port"}, diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c index 9544cdc..e79e006 100644 --- a/drivers/parisc/iosapic.c +++ b/drivers/parisc/iosapic.c @@ -811,6 +811,70 @@ int iosapic_fixup_irq(void *isi_obj, struct pci_dev *pcidev) return pcidev->irq; } +static struct iosapic_info *first_isi = NULL; + +#ifdef CONFIG_64BIT +int iosapic_serial_irq(int num) +{ + struct iosapic_info *isi = first_isi; + struct irt_entry *irte = NULL; /* only used if PAT PDC */ + struct vector_info *vi; + int isi_line; /* line used by device */ + + /* lookup IRT entry for isi/slot/pin set */ + irte = &irt_cell[num]; + + DBG_IRT("iosapic_serial_irq(): irte %p %x %x %x %x %x %x %x %x\n", + irte, + irte->entry_type, + irte->entry_length, + irte->polarity_trigger, + irte->src_bus_irq_devno, + irte->src_bus_id, + irte->src_seg_id, + irte->dest_iosapic_intin, + (u32) irte->dest_iosapic_addr); + isi_line = irte->dest_iosapic_intin; + + /* get vector info for this input line */ + vi = isi->isi_vector + isi_line; + DBG_IRT("iosapic_serial_irq: line %d vi 0x%p\n", isi_line, vi); + + /* If this IRQ line has already been setup, skip it */ + if (vi->irte) + goto out; + + vi->irte = irte; + + /* + * Allocate processor IRQ + * + * XXX/FIXME The txn_alloc_irq() code and related code should be + * moved to enable_irq(). That way we only allocate processor IRQ + * bits for devices that actually have drivers claiming them. + * Right now we assign an IRQ to every PCI device present, + * regardless of whether it's used or not. + */ + vi->txn_irq = txn_alloc_irq(8); + + if (vi->txn_irq < 0) + panic("I/O sapic: couldn't get TXN IRQ\n"); + + /* enable_irq() will use txn_* to program IRdT */ + vi->txn_addr = txn_alloc_addr(vi->txn_irq); + vi->txn_data = txn_alloc_data(vi->txn_irq); + + vi->eoi_addr = isi->addr + IOSAPIC_REG_EOI; + vi->eoi_data = cpu_to_le32(vi->txn_data); + + cpu_claim_irq(vi->txn_irq, &iosapic_interrupt_type, vi); + + out: + + return vi->txn_irq; +} +#endif + /* ** squirrel away the I/O Sapic Version @@ -877,6 +941,8 @@ void *iosapic_register(unsigned long hpa) vip->irqline = (unsigned char) cnt; vip->iosapic = isi; } + if (!first_isi) + first_isi = isi; return isi; } diff --git a/drivers/tty/serial/8250/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c index 097dff9..bb91b47 100644 --- a/drivers/tty/serial/8250/8250_gsc.c +++ b/drivers/tty/serial/8250/8250_gsc.c @@ -30,6 +30,12 @@ static int __init serial_init_chip(struct parisc_device *dev) unsigned long address; int err; +#ifdef CONFIG_64BIT + extern int iosapic_serial_irq(int cellnum); + if (!dev->irq && (dev->id.sversion == 0xad)) + dev->irq = iosapic_serial_irq(dev->mod_index-1); +#endif + if (!dev->irq) { /* We find some unattached serial ports by walking native * busses. These should be silently ignored. Otherwise, @@ -51,7 +57,8 @@ static int __init serial_init_chip(struct parisc_device *dev) memset(&uart, 0, sizeof(uart)); uart.port.iotype = UPIO_MEM; /* 7.272727MHz on Lasi. Assumed the same for Dino, Wax and Timi. */ - uart.port.uartclk = 7272727; + uart.port.uartclk = (dev->id.sversion != 0xad) ? + 7272727 : 1843200; uart.port.mapbase = address; uart.port.membase = ioremap_nocache(address, 16); uart.port.irq = dev->irq; @@ -73,6 +80,7 @@ static struct parisc_device_id serial_tbl[] = { { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00075 }, { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008c }, { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008d }, + { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x000ad }, { 0 } }; -- cgit v0.10.2 From 2cc7138f4347df939ce03f313e3d87794bab36f8 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Fri, 14 Jun 2013 09:05:41 +0200 Subject: parisc: provide pci_mmap_page_range() for parisc pci_mmap_page_range() is needed for X11-server support on C8000 with ATI FireGL card. Signed-off-by Thomas Bogendoerfer Signed-off-by: Helge Deller diff --git a/arch/parisc/include/asm/pci.h b/arch/parisc/include/asm/pci.h index 3234f49..4651540 100644 --- a/arch/parisc/include/asm/pci.h +++ b/arch/parisc/include/asm/pci.h @@ -225,4 +225,9 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) return channel ? 15 : 14; } +#define HAVE_PCI_MMAP + +extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine); + #endif /* __ASM_PARISC_PCI_H */ diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c index 6030905..64f2764 100644 --- a/arch/parisc/kernel/pci.c +++ b/arch/parisc/kernel/pci.c @@ -220,6 +220,33 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res, } +int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine) +{ + unsigned long prot; + + /* + * I/O space can be accessed via normal processor loads and stores on + * this platform but for now we elect not to do this and portable + * drivers should not do this anyway. + */ + if (mmap_state == pci_mmap_io) + return -EINVAL; + + if (write_combine) + return -EINVAL; + + /* + * Ignore write-combine; for now only return uncached mappings. + */ + prot = pgprot_val(vma->vm_page_prot); + prot |= _PAGE_NO_CACHE; + vma->vm_page_prot = __pgprot(prot); + + return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, + vma->vm_end - vma->vm_start, vma->vm_page_prot); +} + /* * A driver is enabling the device. We make sure that all the appropriate * bits are set to allow the device to operate as the driver is expecting. -- cgit v0.10.2 From d65ea48dc61ffdf6cd7f25b4c319bbd68015e018 Mon Sep 17 00:00:00 2001 From: John David Anglin Date: Sun, 2 Jun 2013 12:21:48 -0400 Subject: parisc: Use unshadowed index register for flush instructions in flush_dcache_page_asm and flush_icache_page_asm The comment at the start of pacache.S states that the base and index registers used for fdc,fic, and pdc instructions should not use shadowed registers. Although this is probably unnecessary for tmpalias flushes, there is also no reason not to comply. Signed-off-by: John David Anglin Signed-off-by: Helge Deller diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S index 36d7f40..b743a80 100644 --- a/arch/parisc/kernel/pacache.S +++ b/arch/parisc/kernel/pacache.S @@ -860,7 +860,7 @@ ENTRY(flush_dcache_page_asm) #endif ldil L%dcache_stride, %r1 - ldw R%dcache_stride(%r1), %r1 + ldw R%dcache_stride(%r1), r31 #ifdef CONFIG_64BIT depdi,z 1, 63-PAGE_SHIFT,1, %r25 @@ -868,26 +868,26 @@ ENTRY(flush_dcache_page_asm) depwi,z 1, 31-PAGE_SHIFT,1, %r25 #endif add %r28, %r25, %r25 - sub %r25, %r1, %r25 - - -1: fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) + sub %r25, r31, %r25 + + +1: fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) cmpb,COND(<<) %r28, %r25,1b - fdc,m %r1(%r28) + fdc,m r31(%r28) sync @@ -936,7 +936,7 @@ ENTRY(flush_icache_page_asm) #endif ldil L%icache_stride, %r1 - ldw R%icache_stride(%r1), %r1 + ldw R%icache_stride(%r1), %r31 #ifdef CONFIG_64BIT depdi,z 1, 63-PAGE_SHIFT,1, %r25 @@ -944,28 +944,28 @@ ENTRY(flush_icache_page_asm) depwi,z 1, 31-PAGE_SHIFT,1, %r25 #endif add %r28, %r25, %r25 - sub %r25, %r1, %r25 + sub %r25, %r31, %r25 /* fic only has the type 26 form on PA1.1, requiring an * explicit space specification, so use %sr4 */ -1: fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) +1: fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) cmpb,COND(<<) %r28, %r25,1b - fic,m %r1(%sr4,%r28) + fic,m %r31(%sr4,%r28) sync -- cgit v0.10.2 From d1603990ea626668c78527376d9ec084d634202d Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 18 Jun 2013 12:33:40 -0700 Subject: x86: fix build error and kconfig for ia32_emulation and binfmt Fix kconfig warning and build errors on x86_64 by selecting BINFMT_ELF when COMPAT_BINFMT_ELF is being selected. warning: (IA32_EMULATION) selects COMPAT_BINFMT_ELF which has unmet direct dependencies (COMPAT && BINFMT_ELF) fs/built-in.o: In function `elf_core_dump': compat_binfmt_elf.c:(.text+0x3e093): undefined reference to `elf_core_extra_phdrs' compat_binfmt_elf.c:(.text+0x3ebcd): undefined reference to `elf_core_extra_data_size' compat_binfmt_elf.c:(.text+0x3eddd): undefined reference to `elf_core_write_extra_phdrs' compat_binfmt_elf.c:(.text+0x3f004): undefined reference to `elf_core_write_extra_data' [ hpa: This was sent to me for -next but it is a low risk build fix ] Signed-off-by: Randy Dunlap Link: http://lkml.kernel.org/r/51C0B614.5000708@infradead.org Cc: Signed-off-by: H. Peter Anvin diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 685692c..fe120da 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -2265,6 +2265,7 @@ source "fs/Kconfig.binfmt" config IA32_EMULATION bool "IA32 Emulation" depends on X86_64 + select BINFMT_ELF select COMPAT_BINFMT_ELF select HAVE_UID16 ---help--- -- cgit v0.10.2 From ebc0bad4a05ad63979e8bc115cea3b8abdf814c7 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 19 Jun 2013 03:14:20 +0200 Subject: drm/prime: Honor requested file flags when exporting a buffer The DRM PRIME API passes file flags to the driver for the exported buffer. Honor them instead of hardcoding 0600. Signed-off-by: Laurent Pinchart Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_prime.c b/drivers/gpu/drm/drm_prime.c index dcde352..5b7b911 100644 --- a/drivers/gpu/drm/drm_prime.c +++ b/drivers/gpu/drm/drm_prime.c @@ -190,8 +190,7 @@ struct dma_buf *drm_gem_prime_export(struct drm_device *dev, if (ret) return ERR_PTR(ret); } - return dma_buf_export(obj, &drm_gem_prime_dmabuf_ops, obj->size, - 0600); + return dma_buf_export(obj, &drm_gem_prime_dmabuf_ops, obj->size, flags); } EXPORT_SYMBOL(drm_gem_prime_export); -- cgit v0.10.2 From c9036e9f3b2b77f678572260e1ef1075fcb08c36 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 19 Jun 2013 12:35:42 +0400 Subject: mconsole: we'd better initialize pos before passing it to vfs_read()... Signed-off-by: Al Viro diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c index d7d2185..3df3bd5 100644 --- a/arch/um/drivers/mconsole_kern.c +++ b/arch/um/drivers/mconsole_kern.c @@ -147,7 +147,7 @@ void mconsole_proc(struct mc_request *req) } do { - loff_t pos; + loff_t pos = file->f_pos; mm_segment_t old_fs = get_fs(); set_fs(KERNEL_DS); len = vfs_read(file, buf, PAGE_SIZE - 1, &pos); -- cgit v0.10.2 From ccd847b2c101a7e5772d0463ac76f7c18732675a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 7 May 2013 11:55:55 +0200 Subject: sparc: Switch to asm-generic/linkage.h Signed-off-by: Geert Uytterhoeven Signed-off-by: David S. Miller diff --git a/arch/sparc/include/asm/Kbuild b/arch/sparc/include/asm/Kbuild index ff18e3c..7e4a97f 100644 --- a/arch/sparc/include/asm/Kbuild +++ b/arch/sparc/include/asm/Kbuild @@ -6,6 +6,7 @@ generic-y += cputime.h generic-y += div64.h generic-y += emergency-restart.h generic-y += exec.h +generic-y += linkage.h generic-y += local64.h generic-y += mutex.h generic-y += irq_regs.h diff --git a/arch/sparc/include/asm/linkage.h b/arch/sparc/include/asm/linkage.h deleted file mode 100644 index 291c2d0..0000000 --- a/arch/sparc/include/asm/linkage.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_LINKAGE_H -#define __ASM_LINKAGE_H - -/* Nothing to see here... */ - -#endif -- cgit v0.10.2 From dbebe0da64d0738a21221a7f9d29510b9f29d908 Mon Sep 17 00:00:00 2001 From: Denis Efremov Date: Thu, 9 May 2013 14:36:54 +0400 Subject: sparc: remove inline marking of EXPORT_SYMBOL functions EXPORT_SYMBOL and inline directives are contradictory to each other. The patch fixes this inconsistency. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Denis Efremov Signed-off-by: David S. Miller diff --git a/arch/sparc/prom/tree_64.c b/arch/sparc/prom/tree_64.c index 92204c3..bd1b2a3 100644 --- a/arch/sparc/prom/tree_64.c +++ b/arch/sparc/prom/tree_64.c @@ -39,7 +39,7 @@ inline phandle __prom_getchild(phandle node) return prom_node_to_node("child", node); } -inline phandle prom_getchild(phandle node) +phandle prom_getchild(phandle node) { phandle cnode; @@ -72,7 +72,7 @@ inline phandle __prom_getsibling(phandle node) return prom_node_to_node(prom_peer_name, node); } -inline phandle prom_getsibling(phandle node) +phandle prom_getsibling(phandle node) { phandle sibnode; @@ -89,7 +89,7 @@ EXPORT_SYMBOL(prom_getsibling); /* Return the length in bytes of property 'prop' at node 'node'. * Return -1 on error. */ -inline int prom_getproplen(phandle node, const char *prop) +int prom_getproplen(phandle node, const char *prop) { unsigned long args[6]; @@ -113,8 +113,8 @@ EXPORT_SYMBOL(prom_getproplen); * 'buffer' which has a size of 'bufsize'. If the acquisition * was successful the length will be returned, else -1 is returned. */ -inline int prom_getproperty(phandle node, const char *prop, - char *buffer, int bufsize) +int prom_getproperty(phandle node, const char *prop, + char *buffer, int bufsize) { unsigned long args[8]; int plen; @@ -141,7 +141,7 @@ EXPORT_SYMBOL(prom_getproperty); /* Acquire an integer property and return its value. Returns -1 * on failure. */ -inline int prom_getint(phandle node, const char *prop) +int prom_getint(phandle node, const char *prop) { int intprop; @@ -235,7 +235,7 @@ static const char *prom_nextprop_name = "nextprop"; /* Return the first property type for node 'node'. * buffer should be at least 32B in length */ -inline char *prom_firstprop(phandle node, char *buffer) +char *prom_firstprop(phandle node, char *buffer) { unsigned long args[7]; @@ -261,7 +261,7 @@ EXPORT_SYMBOL(prom_firstprop); * at node 'node' . Returns NULL string if no more * property types for this node. */ -inline char *prom_nextprop(phandle node, const char *oprop, char *buffer) +char *prom_nextprop(phandle node, const char *oprop, char *buffer) { unsigned long args[7]; char buf[32]; -- cgit v0.10.2 From 242ece22f0bd90e237365e51c5bd90a21693d6c3 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Thu, 30 May 2013 11:35:22 +0800 Subject: arch: sparc: prom: looping issue, need additional length check in the outside looping When "cp >= barg_buf + BARG_LEN-2", it breaks internel looping 'while', but outside loop 'for' still has effect, so "*cp++ = ' '" will continue repeating which may cause memory overflow. So need additional length check for it in the outside looping. Also beautify the related code which found by "./scripts/checkpatch.pl" Signed-off-by: Chen Gang Signed-off-by: David S. Miller diff --git a/arch/sparc/prom/bootstr_32.c b/arch/sparc/prom/bootstr_32.c index f5ec32e..d2b49d2 100644 --- a/arch/sparc/prom/bootstr_32.c +++ b/arch/sparc/prom/bootstr_32.c @@ -23,23 +23,25 @@ prom_getbootargs(void) return barg_buf; } - switch(prom_vers) { + switch (prom_vers) { case PROM_V0: cp = barg_buf; /* Start from 1 and go over fd(0,0,0)kernel */ - for(iter = 1; iter < 8; iter++) { + for (iter = 1; iter < 8; iter++) { arg = (*(romvec->pv_v0bootargs))->argv[iter]; if (arg == NULL) break; - while(*arg != 0) { + while (*arg != 0) { /* Leave place for space and null. */ - if(cp >= barg_buf + BARG_LEN-2){ + if (cp >= barg_buf + BARG_LEN - 2) /* We might issue a warning here. */ break; - } *cp++ = *arg++; } *cp++ = ' '; + if (cp >= barg_buf + BARG_LEN - 1) + /* We might issue a warning here. */ + break; } *cp = 0; break; -- cgit v0.10.2 From 117a0c5fc9c2d06045bd217385b2b39ea426b5a6 Mon Sep 17 00:00:00 2001 From: Zhao Hongjiang Date: Sun, 9 Jun 2013 16:57:58 +0800 Subject: sparc: kernel: using strlcpy() instead of strcpy() 'boot_command_line' and 'full_boot_str' has a fix length, 'cmdline_p' and 'boot_command' maybe larger than them. So use strlcpy() instead of strcpy() to avoid memory overflow. Signed-off-by: Zhao Hongjiang Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/ds.c b/arch/sparc/kernel/ds.c index 75bb608..5ef48da 100644 --- a/arch/sparc/kernel/ds.c +++ b/arch/sparc/kernel/ds.c @@ -843,7 +843,8 @@ void ldom_reboot(const char *boot_command) unsigned long len; strcpy(full_boot_str, "boot "); - strcpy(full_boot_str + strlen("boot "), boot_command); + strlcpy(full_boot_str + strlen("boot "), boot_command, + sizeof(full_boot_str + strlen("boot "))); len = strlen(full_boot_str); if (reboot_data_supported) { diff --git a/arch/sparc/kernel/setup_32.c b/arch/sparc/kernel/setup_32.c index 38bf80a..1434526 100644 --- a/arch/sparc/kernel/setup_32.c +++ b/arch/sparc/kernel/setup_32.c @@ -304,7 +304,7 @@ void __init setup_arch(char **cmdline_p) /* Initialize PROM console and command line. */ *cmdline_p = prom_getbootargs(); - strcpy(boot_command_line, *cmdline_p); + strlcpy(boot_command_line, *cmdline_p, COMMAND_LINE_SIZE); parse_early_param(); boot_flags_init(*cmdline_p); diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c index 88a127b..1378554 100644 --- a/arch/sparc/kernel/setup_64.c +++ b/arch/sparc/kernel/setup_64.c @@ -555,7 +555,7 @@ void __init setup_arch(char **cmdline_p) { /* Initialize PROM console and command line. */ *cmdline_p = prom_getbootargs(); - strcpy(boot_command_line, *cmdline_p); + strlcpy(boot_command_line, *cmdline_p, COMMAND_LINE_SIZE); parse_early_param(); boot_flags_init(*cmdline_p); -- cgit v0.10.2 From 1ffbc51a0d00e52983c70aa7c8dbc7b621d6287d Mon Sep 17 00:00:00 2001 From: Andreas Larsson Date: Mon, 10 Jun 2013 08:53:28 +0200 Subject: sparc32, leon: Remove separate "ticker" timer for SMP This reduces the need from two timers to one timer. Moreover, without this patch, when the "ticker" timer triggers timer_cs_read via tick_periodic it reads the value of the usual timer it can get an wrapped timer value without timer_cs_internal_counter having been updated leading to the clock going backwards. This effectively hangs one cpu that gets stuck in update_wall_time with an offset slightly smaller than 0xffffffffffffffff. Signed-off-by: Andreas Larsson Signed-off-by: David S. Miller diff --git a/arch/sparc/include/asm/leon.h b/arch/sparc/include/asm/leon.h index 15a7169..b836e92 100644 --- a/arch/sparc/include/asm/leon.h +++ b/arch/sparc/include/asm/leon.h @@ -135,7 +135,7 @@ static inline int sparc_leon3_cpuid(void) #ifdef CONFIG_SMP # define LEON3_IRQ_IPI_DEFAULT 13 -# define LEON3_IRQ_TICKER (leon3_ticker_irq) +# define LEON3_IRQ_TICKER (leon3_gptimer_irq) # define LEON3_IRQ_CROSS_CALL 15 #endif diff --git a/arch/sparc/include/asm/leon_amba.h b/arch/sparc/include/asm/leon_amba.h index f3034ed..24ec48c 100644 --- a/arch/sparc/include/asm/leon_amba.h +++ b/arch/sparc/include/asm/leon_amba.h @@ -47,6 +47,7 @@ struct amba_prom_registers { #define LEON3_GPTIMER_LD 4 #define LEON3_GPTIMER_IRQEN 8 #define LEON3_GPTIMER_SEPIRQ 8 +#define LEON3_GPTIMER_TIMERS 0x7 #define LEON23_REG_TIMER_CONTROL_EN 0x00000001 /* 1 = enable counting */ /* 0 = hold scalar and counter */ diff --git a/arch/sparc/kernel/leon_kernel.c b/arch/sparc/kernel/leon_kernel.c index 7c0231d..b7c6897 100644 --- a/arch/sparc/kernel/leon_kernel.c +++ b/arch/sparc/kernel/leon_kernel.c @@ -38,7 +38,6 @@ static DEFINE_SPINLOCK(leon_irq_lock); unsigned long leon3_gptimer_irq; /* interrupt controller irq number */ unsigned long leon3_gptimer_idx; /* Timer Index (0..6) within Timer Core */ -int leon3_ticker_irq; /* Timer ticker IRQ */ unsigned int sparc_leon_eirq; #define LEON_IMASK(cpu) (&leon3_irqctrl_regs->mask[cpu]) #define LEON_IACK (&leon3_irqctrl_regs->iclear) @@ -278,6 +277,9 @@ irqreturn_t leon_percpu_timer_ce_interrupt(int irq, void *unused) leon_clear_profile_irq(cpu); + if (cpu == boot_cpu_id) + timer_interrupt(irq, NULL); + ce = &per_cpu(sparc32_clockevent, cpu); irq_enter(); @@ -299,6 +301,7 @@ void __init leon_init_timers(void) int icsel; int ampopts; int err; + u32 config; sparc_config.get_cycles_offset = leon_cycles_offset; sparc_config.cs_period = 1000000 / HZ; @@ -377,23 +380,6 @@ void __init leon_init_timers(void) LEON3_BYPASS_STORE_PA( &leon3_gptimer_regs->e[leon3_gptimer_idx].ctrl, 0); -#ifdef CONFIG_SMP - leon3_ticker_irq = leon3_gptimer_irq + 1 + leon3_gptimer_idx; - - if (!(LEON3_BYPASS_LOAD_PA(&leon3_gptimer_regs->config) & - (1<e[leon3_gptimer_idx+1].val, - 0); - LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx+1].rld, - (((1000000/HZ) - 1))); - LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx+1].ctrl, - 0); -#endif - /* * The IRQ controller may (if implemented) consist of multiple * IRQ controllers, each mapped on a 4Kb boundary. @@ -416,13 +402,6 @@ void __init leon_init_timers(void) if (eirq != 0) leon_eirq_setup(eirq); - irq = _leon_build_device_irq(NULL, leon3_gptimer_irq+leon3_gptimer_idx); - err = request_irq(irq, timer_interrupt, IRQF_TIMER, "timer", NULL); - if (err) { - printk(KERN_ERR "unable to attach timer IRQ%d\n", irq); - prom_halt(); - } - #ifdef CONFIG_SMP { unsigned long flags; @@ -439,30 +418,31 @@ void __init leon_init_timers(void) } #endif - LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx].ctrl, - LEON3_GPTIMER_EN | - LEON3_GPTIMER_RL | - LEON3_GPTIMER_LD | - LEON3_GPTIMER_IRQEN); + config = LEON3_BYPASS_LOAD_PA(&leon3_gptimer_regs->config); + if (config & (1 << LEON3_GPTIMER_SEPIRQ)) + leon3_gptimer_irq += leon3_gptimer_idx; + else if ((config & LEON3_GPTIMER_TIMERS) > 1) + pr_warn("GPTIMER uses shared irqs, using other timers of the same core will fail.\n"); #ifdef CONFIG_SMP /* Install per-cpu IRQ handler for broadcasted ticker */ - irq = leon_build_device_irq(leon3_ticker_irq, handle_percpu_irq, + irq = leon_build_device_irq(leon3_gptimer_irq, handle_percpu_irq, "per-cpu", 0); err = request_irq(irq, leon_percpu_timer_ce_interrupt, - IRQF_PERCPU | IRQF_TIMER, "ticker", - NULL); + IRQF_PERCPU | IRQF_TIMER, "timer", NULL); +#else + irq = _leon_build_device_irq(NULL, leon3_gptimer_irq); + err = request_irq(irq, timer_interrupt, IRQF_TIMER, "timer", NULL); +#endif if (err) { - printk(KERN_ERR "unable to attach ticker IRQ%d\n", irq); + pr_err("Unable to attach timer IRQ%d\n", irq); prom_halt(); } - - LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx+1].ctrl, + LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx].ctrl, LEON3_GPTIMER_EN | LEON3_GPTIMER_RL | LEON3_GPTIMER_LD | LEON3_GPTIMER_IRQEN); -#endif return; bad: printk(KERN_ERR "No Timer/irqctrl found\n"); -- cgit v0.10.2 From d72ee6be58b7c99a6e8da6584106c5958dae2bf8 Mon Sep 17 00:00:00 2001 From: Andreas Larsson Date: Mon, 10 Jun 2013 08:56:41 +0200 Subject: sparc32, leon: Enable interrupts before going idle to avoid getting stuck This enables interrupts for Leon before having the CPU enter power-down mode. Commit 87fa05aeb3a5e8e21b1a5510eef6983650eff092, "sparc: Use generic idle loop", gets the CPU stuck on idle for Leon systems. On Leon, disabling interrupts and powering down the processor will get the processor stuck waiting for an interrupt that will never be reacted to. Signed-off-by: Andreas Larsson Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/leon_pmc.c b/arch/sparc/kernel/leon_pmc.c index bdf53d9..b0b3967 100644 --- a/arch/sparc/kernel/leon_pmc.c +++ b/arch/sparc/kernel/leon_pmc.c @@ -47,6 +47,10 @@ void pmc_leon_idle_fixup(void) * MMU does not get a TLB miss here by using the MMU BYPASS ASI. */ register unsigned int address = (unsigned int)leon3_irqctrl_regs; + + /* Interrupts need to be enabled to not hang the CPU */ + local_irq_enable(); + __asm__ __volatile__ ( "wr %%g0, %%asr19\n" "lda [%0] %1, %%g0\n" @@ -60,6 +64,9 @@ void pmc_leon_idle_fixup(void) */ void pmc_leon_idle(void) { + /* Interrupts need to be enabled to not hang the CPU */ + local_irq_enable(); + /* For systems without power-down, this will be no-op */ __asm__ __volatile__ ("wr %g0, %asr19\n\t"); } -- cgit v0.10.2 From 771a37ff4d80b80db3b0df3e7696f14b298c67b7 Mon Sep 17 00:00:00 2001 From: bob picco Date: Tue, 11 Jun 2013 14:54:51 -0400 Subject: sparc64 address-congruence property The Machine Description (MD) property "address-congruence-offset" is optional. According to the MD specification the value is assumed 0UL when not present. This caused early boot failure on T5. Signed-off-by: Bob Picco CC: sparclinux@vger.kernel.org Signed-off-by: David S. Miller diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c index a717199..04fd55a 100644 --- a/arch/sparc/mm/init_64.c +++ b/arch/sparc/mm/init_64.c @@ -1098,7 +1098,14 @@ static int __init grab_mblocks(struct mdesc_handle *md) m->size = *val; val = mdesc_get_property(md, node, "address-congruence-offset", NULL); - m->offset = *val; + + /* The address-congruence-offset property is optional. + * Explicity zero it be identifty this. + */ + if (val) + m->offset = *val; + else + m->offset = 0UL; numadbg("MBLOCK[%d]: base[%llx] size[%llx] offset[%llx]\n", count - 1, m->base, m->size, m->offset); -- cgit v0.10.2 From f670758f5b829169562e1016a72af0c59360a541 Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Mon, 17 Jun 2013 14:37:44 +0530 Subject: sparc,leon: Convert to use devm_ioremap_resource Commit 75096579c3ac ("lib: devres: Introduce devm_ioremap_resource()") introduced devm_ioremap_resource() and deprecated the use of devm_request_and_ioremap(). While at it, also remove the error message as devm_ioremap_resource() also prints similar error message. Signed-off-by: Tushar Behera CC: sparclinux@vger.kernel.org CC: "David S. Miller" Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/leon_pci_grpci1.c b/arch/sparc/kernel/leon_pci_grpci1.c index 7739a54..6df26e3 100644 --- a/arch/sparc/kernel/leon_pci_grpci1.c +++ b/arch/sparc/kernel/leon_pci_grpci1.c @@ -536,11 +536,9 @@ static int grpci1_of_probe(struct platform_device *ofdev) /* find device register base address */ res = platform_get_resource(ofdev, IORESOURCE_MEM, 0); - regs = devm_request_and_ioremap(&ofdev->dev, res); - if (!regs) { - dev_err(&ofdev->dev, "io-regs mapping failed\n"); - return -EADDRNOTAVAIL; - } + regs = devm_ioremap_resource(&ofdev->dev, res); + if (IS_ERR(regs)) + return PTR_ERR(regs); /* * check that we're in Host Slot and that we can act as a Host Bridge -- cgit v0.10.2 From 23a01138efe216f8084cfaa74b0b90dd4b097441 Mon Sep 17 00:00:00 2001 From: Dave Kleikamp Date: Tue, 18 Jun 2013 09:05:36 -0500 Subject: sparc: tsb must be flushed before tlb This fixes a race where a cpu may re-load a tlb from a stale tsb right after it has been flushed by a remote function call. I still see some instability when stressing the system with parallel kernel builds while creating memory pressure by writing to /proc/sys/vm/nr_hugepages, but this patch improves the stability significantly. Signed-off-by: Dave Kleikamp Acked-by: Bob Picco Signed-off-by: David S. Miller diff --git a/arch/sparc/mm/tlb.c b/arch/sparc/mm/tlb.c index 83d89bc..37e7bc4 100644 --- a/arch/sparc/mm/tlb.c +++ b/arch/sparc/mm/tlb.c @@ -85,8 +85,8 @@ static void tlb_batch_add_one(struct mm_struct *mm, unsigned long vaddr, } if (!tb->active) { - global_flush_tlb_page(mm, vaddr); flush_tsb_user_page(mm, vaddr); + global_flush_tlb_page(mm, vaddr); goto out; } -- cgit v0.10.2 From f8941fbe204fa2fb51e7acd8bfd0f51225fe03b4 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Tue, 11 Jun 2013 11:38:31 -0500 Subject: kvm/ppc/booke: Delay kvmppc_lazy_ee_enable kwmppc_lazy_ee_enable() should be called as late as possible, or else we get things like WARN_ON(preemptible()) in enable_kernel_fp() in configurations where preemptible() works. Note that book3s_pr already waits until just before __kvmppc_vcpu_run to call kvmppc_lazy_ee_enable(). Signed-off-by: Scott Wood Signed-off-by: Paolo Bonzini diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c index 5cd7ad0..1a1b511 100644 --- a/arch/powerpc/kvm/booke.c +++ b/arch/powerpc/kvm/booke.c @@ -673,7 +673,6 @@ int kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu) ret = s; goto out; } - kvmppc_lazy_ee_enable(); kvm_guest_enter(); @@ -699,6 +698,8 @@ int kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu) kvmppc_load_guest_fp(vcpu); #endif + kvmppc_lazy_ee_enable(); + ret = __kvmppc_vcpu_run(kvm_run, vcpu); /* No need for kvm_guest_exit. It's done in handle_exit. -- cgit v0.10.2 From 07868fc6aaf57847b0f3a3d53086b7556eb83f4a Mon Sep 17 00:00:00 2001 From: Igor Mammedov Date: Mon, 10 Jun 2013 18:31:11 +0200 Subject: x86: kvmclock: zero initialize pvclock shared memory area kernel might hung in pvclock_clocksource_read() due to uninitialized memory might contain odd version value in following cycle: do { version = __pvclock_read_cycles(src, &ret, &flags); } while ((src->version & 1) || version != src->version); if secondary kvmclock is accessed before it's registered with kvm. Clear garbage in pvclock shared memory area right after it's allocated to avoid this issue. Ref: https://bugzilla.kernel.org/show_bug.cgi?id=59521 Signed-off-by: Igor Mammedov [See BZ for analysis. We may want a different fix for 3.11, but this is the safest for now - Paolo] Cc: # 3.8 Signed-off-by: Paolo Bonzini diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c index d2c3812..3dd37eb 100644 --- a/arch/x86/kernel/kvmclock.c +++ b/arch/x86/kernel/kvmclock.c @@ -242,6 +242,7 @@ void __init kvmclock_init(void) if (!mem) return; hv_clock = __va(mem); + memset(hv_clock, 0, size); if (kvm_register_clock("boot clock")) { hv_clock = NULL; -- cgit v0.10.2 From 9bb5d40cd93c9dd4be74834b1dcb1ba03629716b Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 4 Jun 2013 10:44:21 +0200 Subject: perf: Fix mmap() accounting hole Vince's fuzzer once again found holes. This time it spotted a leak in the locked page accounting. When an event had redirected output and its close() was the last reference to the buffer we didn't have a vm context to undo accounting. Change the code to destroy the buffer on the last munmap() and detach all redirected events at that time. This provides us the right context to undo the vm accounting. Reported-and-tested-by: Vince Weaver Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20130604084421.GI8923@twins.programming.kicks-ass.net Cc: Signed-off-by: Ingo Molnar diff --git a/kernel/events/core.c b/kernel/events/core.c index ae752cd..b391907 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -196,9 +196,6 @@ static void cpu_ctx_sched_in(struct perf_cpu_context *cpuctx, static void update_context_time(struct perf_event_context *ctx); static u64 perf_event_time(struct perf_event *event); -static void ring_buffer_attach(struct perf_event *event, - struct ring_buffer *rb); - void __weak perf_event_print_debug(void) { } extern __weak const char *perf_pmu_name(void) @@ -2917,7 +2914,8 @@ static void free_event_rcu(struct rcu_head *head) kfree(event); } -static bool ring_buffer_put(struct ring_buffer *rb); +static void ring_buffer_put(struct ring_buffer *rb); +static void ring_buffer_detach(struct perf_event *event, struct ring_buffer *rb); static void free_event(struct perf_event *event) { @@ -2942,15 +2940,30 @@ static void free_event(struct perf_event *event) if (has_branch_stack(event)) { static_key_slow_dec_deferred(&perf_sched_events); /* is system-wide event */ - if (!(event->attach_state & PERF_ATTACH_TASK)) + if (!(event->attach_state & PERF_ATTACH_TASK)) { atomic_dec(&per_cpu(perf_branch_stack_events, event->cpu)); + } } } if (event->rb) { - ring_buffer_put(event->rb); - event->rb = NULL; + struct ring_buffer *rb; + + /* + * Can happen when we close an event with re-directed output. + * + * Since we have a 0 refcount, perf_mmap_close() will skip + * over us; possibly making our ring_buffer_put() the last. + */ + mutex_lock(&event->mmap_mutex); + rb = event->rb; + if (rb) { + rcu_assign_pointer(event->rb, NULL); + ring_buffer_detach(event, rb); + ring_buffer_put(rb); /* could be last */ + } + mutex_unlock(&event->mmap_mutex); } if (is_cgroup_event(event)) @@ -3188,30 +3201,13 @@ static unsigned int perf_poll(struct file *file, poll_table *wait) unsigned int events = POLL_HUP; /* - * Race between perf_event_set_output() and perf_poll(): perf_poll() - * grabs the rb reference but perf_event_set_output() overrides it. - * Here is the timeline for two threads T1, T2: - * t0: T1, rb = rcu_dereference(event->rb) - * t1: T2, old_rb = event->rb - * t2: T2, event->rb = new rb - * t3: T2, ring_buffer_detach(old_rb) - * t4: T1, ring_buffer_attach(rb1) - * t5: T1, poll_wait(event->waitq) - * - * To avoid this problem, we grab mmap_mutex in perf_poll() - * thereby ensuring that the assignment of the new ring buffer - * and the detachment of the old buffer appear atomic to perf_poll() + * Pin the event->rb by taking event->mmap_mutex; otherwise + * perf_event_set_output() can swizzle our rb and make us miss wakeups. */ mutex_lock(&event->mmap_mutex); - - rcu_read_lock(); - rb = rcu_dereference(event->rb); - if (rb) { - ring_buffer_attach(event, rb); + rb = event->rb; + if (rb) events = atomic_xchg(&rb->poll, 0); - } - rcu_read_unlock(); - mutex_unlock(&event->mmap_mutex); poll_wait(file, &event->waitq, wait); @@ -3521,16 +3517,12 @@ static void ring_buffer_attach(struct perf_event *event, return; spin_lock_irqsave(&rb->event_lock, flags); - if (!list_empty(&event->rb_entry)) - goto unlock; - - list_add(&event->rb_entry, &rb->event_list); -unlock: + if (list_empty(&event->rb_entry)) + list_add(&event->rb_entry, &rb->event_list); spin_unlock_irqrestore(&rb->event_lock, flags); } -static void ring_buffer_detach(struct perf_event *event, - struct ring_buffer *rb) +static void ring_buffer_detach(struct perf_event *event, struct ring_buffer *rb) { unsigned long flags; @@ -3549,13 +3541,10 @@ static void ring_buffer_wakeup(struct perf_event *event) rcu_read_lock(); rb = rcu_dereference(event->rb); - if (!rb) - goto unlock; - - list_for_each_entry_rcu(event, &rb->event_list, rb_entry) - wake_up_all(&event->waitq); - -unlock: + if (rb) { + list_for_each_entry_rcu(event, &rb->event_list, rb_entry) + wake_up_all(&event->waitq); + } rcu_read_unlock(); } @@ -3582,23 +3571,14 @@ static struct ring_buffer *ring_buffer_get(struct perf_event *event) return rb; } -static bool ring_buffer_put(struct ring_buffer *rb) +static void ring_buffer_put(struct ring_buffer *rb) { - struct perf_event *event, *n; - unsigned long flags; - if (!atomic_dec_and_test(&rb->refcount)) - return false; + return; - spin_lock_irqsave(&rb->event_lock, flags); - list_for_each_entry_safe(event, n, &rb->event_list, rb_entry) { - list_del_init(&event->rb_entry); - wake_up_all(&event->waitq); - } - spin_unlock_irqrestore(&rb->event_lock, flags); + WARN_ON_ONCE(!list_empty(&rb->event_list)); call_rcu(&rb->rcu_head, rb_free_rcu); - return true; } static void perf_mmap_open(struct vm_area_struct *vma) @@ -3606,28 +3586,100 @@ static void perf_mmap_open(struct vm_area_struct *vma) struct perf_event *event = vma->vm_file->private_data; atomic_inc(&event->mmap_count); + atomic_inc(&event->rb->mmap_count); } +/* + * A buffer can be mmap()ed multiple times; either directly through the same + * event, or through other events by use of perf_event_set_output(). + * + * In order to undo the VM accounting done by perf_mmap() we need to destroy + * the buffer here, where we still have a VM context. This means we need + * to detach all events redirecting to us. + */ static void perf_mmap_close(struct vm_area_struct *vma) { struct perf_event *event = vma->vm_file->private_data; - if (atomic_dec_and_mutex_lock(&event->mmap_count, &event->mmap_mutex)) { - struct ring_buffer *rb = event->rb; - struct user_struct *mmap_user = rb->mmap_user; - int mmap_locked = rb->mmap_locked; - unsigned long size = perf_data_size(rb); + struct ring_buffer *rb = event->rb; + struct user_struct *mmap_user = rb->mmap_user; + int mmap_locked = rb->mmap_locked; + unsigned long size = perf_data_size(rb); - rcu_assign_pointer(event->rb, NULL); - ring_buffer_detach(event, rb); - mutex_unlock(&event->mmap_mutex); + atomic_dec(&rb->mmap_count); + + if (!atomic_dec_and_mutex_lock(&event->mmap_count, &event->mmap_mutex)) + return; + + /* Detach current event from the buffer. */ + rcu_assign_pointer(event->rb, NULL); + ring_buffer_detach(event, rb); + mutex_unlock(&event->mmap_mutex); + + /* If there's still other mmap()s of this buffer, we're done. */ + if (atomic_read(&rb->mmap_count)) { + ring_buffer_put(rb); /* can't be last */ + return; + } - if (ring_buffer_put(rb)) { - atomic_long_sub((size >> PAGE_SHIFT) + 1, &mmap_user->locked_vm); - vma->vm_mm->pinned_vm -= mmap_locked; - free_uid(mmap_user); + /* + * No other mmap()s, detach from all other events that might redirect + * into the now unreachable buffer. Somewhat complicated by the + * fact that rb::event_lock otherwise nests inside mmap_mutex. + */ +again: + rcu_read_lock(); + list_for_each_entry_rcu(event, &rb->event_list, rb_entry) { + if (!atomic_long_inc_not_zero(&event->refcount)) { + /* + * This event is en-route to free_event() which will + * detach it and remove it from the list. + */ + continue; } + rcu_read_unlock(); + + mutex_lock(&event->mmap_mutex); + /* + * Check we didn't race with perf_event_set_output() which can + * swizzle the rb from under us while we were waiting to + * acquire mmap_mutex. + * + * If we find a different rb; ignore this event, a next + * iteration will no longer find it on the list. We have to + * still restart the iteration to make sure we're not now + * iterating the wrong list. + */ + if (event->rb == rb) { + rcu_assign_pointer(event->rb, NULL); + ring_buffer_detach(event, rb); + ring_buffer_put(rb); /* can't be last, we still have one */ + } + mutex_unlock(&event->mmap_mutex); + put_event(event); + + /* + * Restart the iteration; either we're on the wrong list or + * destroyed its integrity by doing a deletion. + */ + goto again; } + rcu_read_unlock(); + + /* + * It could be there's still a few 0-ref events on the list; they'll + * get cleaned up by free_event() -- they'll also still have their + * ref on the rb and will free it whenever they are done with it. + * + * Aside from that, this buffer is 'fully' detached and unmapped, + * undo the VM accounting. + */ + + atomic_long_sub((size >> PAGE_SHIFT) + 1, &mmap_user->locked_vm); + vma->vm_mm->pinned_vm -= mmap_locked; + free_uid(mmap_user); + + ring_buffer_put(rb); /* could be last */ } static const struct vm_operations_struct perf_mmap_vmops = { @@ -3677,10 +3729,24 @@ static int perf_mmap(struct file *file, struct vm_area_struct *vma) return -EINVAL; WARN_ON_ONCE(event->ctx->parent_ctx); +again: mutex_lock(&event->mmap_mutex); if (event->rb) { - if (event->rb->nr_pages != nr_pages) + if (event->rb->nr_pages != nr_pages) { ret = -EINVAL; + goto unlock; + } + + if (!atomic_inc_not_zero(&event->rb->mmap_count)) { + /* + * Raced against perf_mmap_close() through + * perf_event_set_output(). Try again, hope for better + * luck. + */ + mutex_unlock(&event->mmap_mutex); + goto again; + } + goto unlock; } @@ -3722,12 +3788,14 @@ static int perf_mmap(struct file *file, struct vm_area_struct *vma) goto unlock; } + atomic_set(&rb->mmap_count, 1); rb->mmap_locked = extra; rb->mmap_user = get_current_user(); atomic_long_add(user_extra, &user->locked_vm); vma->vm_mm->pinned_vm += extra; + ring_buffer_attach(event, rb); rcu_assign_pointer(event->rb, rb); perf_event_update_userpage(event); @@ -3737,6 +3805,10 @@ unlock: atomic_inc(&event->mmap_count); mutex_unlock(&event->mmap_mutex); + /* + * Since pinned accounting is per vm we cannot allow fork() to copy our + * vma. + */ vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND | VM_DONTDUMP; vma->vm_ops = &perf_mmap_vmops; @@ -6415,6 +6487,8 @@ set: if (atomic_read(&event->mmap_count)) goto unlock; + old_rb = event->rb; + if (output_event) { /* get the rb we want to redirect to */ rb = ring_buffer_get(output_event); @@ -6422,16 +6496,28 @@ set: goto unlock; } - old_rb = event->rb; - rcu_assign_pointer(event->rb, rb); if (old_rb) ring_buffer_detach(event, old_rb); + + if (rb) + ring_buffer_attach(event, rb); + + rcu_assign_pointer(event->rb, rb); + + if (old_rb) { + ring_buffer_put(old_rb); + /* + * Since we detached before setting the new rb, so that we + * could attach the new rb, we could have missed a wakeup. + * Provide it now. + */ + wake_up_all(&event->waitq); + } + ret = 0; unlock: mutex_unlock(&event->mmap_mutex); - if (old_rb) - ring_buffer_put(old_rb); out: return ret; } diff --git a/kernel/events/internal.h b/kernel/events/internal.h index 5bc6c8e..ca65997 100644 --- a/kernel/events/internal.h +++ b/kernel/events/internal.h @@ -31,7 +31,8 @@ struct ring_buffer { spinlock_t event_lock; struct list_head event_list; - int mmap_locked; + atomic_t mmap_count; + unsigned long mmap_locked; struct user_struct *mmap_user; struct perf_event_mmap_page *user_page; -- cgit v0.10.2 From f1a527899ef0a8a241eb3bea619eb2e29d797f44 Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Fri, 7 Jun 2013 23:22:10 +0200 Subject: perf/x86: Fix broken PEBS-LL support on SNB-EP/IVB-EP This patch fixes broken support of PEBS-LL on SNB-EP/IVB-EP. For some reason, the LDLAT extra reg definition for snb_ep showed up as duplicate in the snb table. This patch moves the definition of LDLAT back into the snb_ep table. Thanks to Don Zickus for tracking this one down. Signed-off-by: Stephane Eranian Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20130607212210.GA11849@quad Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index f60d41f..a9e2207 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -165,13 +165,13 @@ static struct extra_reg intel_snb_extra_regs[] __read_mostly = { INTEL_EVENT_EXTRA_REG(0xb7, MSR_OFFCORE_RSP_0, 0x3f807f8fffull, RSP_0), INTEL_EVENT_EXTRA_REG(0xbb, MSR_OFFCORE_RSP_1, 0x3f807f8fffull, RSP_1), INTEL_UEVENT_PEBS_LDLAT_EXTRA_REG(0x01cd), - INTEL_UEVENT_PEBS_LDLAT_EXTRA_REG(0x01cd), EVENT_EXTRA_END }; static struct extra_reg intel_snbep_extra_regs[] __read_mostly = { INTEL_EVENT_EXTRA_REG(0xb7, MSR_OFFCORE_RSP_0, 0x3fffff8fffull, RSP_0), INTEL_EVENT_EXTRA_REG(0xbb, MSR_OFFCORE_RSP_1, 0x3fffff8fffull, RSP_1), + INTEL_UEVENT_PEBS_LDLAT_EXTRA_REG(0x01cd), EVENT_EXTRA_END }; -- cgit v0.10.2 From 873b4c65b519fd769940eb281f77848227d4e5c1 Mon Sep 17 00:00:00 2001 From: Vincent Guittot Date: Wed, 5 Jun 2013 10:13:11 +0200 Subject: sched: Fix clear NOHZ_BALANCE_KICK I have faced a sequence where the Idle Load Balance was sometime not triggered for a while on my platform, in the following scenario: CPU 0 and CPU 1 are running tasks and CPU 2 is idle CPU 1 kicks the Idle Load Balance CPU 1 selects CPU 2 as the new Idle Load Balancer CPU 2 sets NOHZ_BALANCE_KICK for CPU 2 CPU 2 sends a reschedule IPI to CPU 2 While CPU 3 wakes up, CPU 0 or CPU 1 migrates a waking up task A on CPU 2 CPU 2 finally wakes up, runs task A and discards the Idle Load Balance task A quickly goes back to sleep (before a tick occurs on CPU 2) CPU 2 goes back to idle with NOHZ_BALANCE_KICK set Whenever CPU 2 will be selected as the ILB, no reschedule IPI will be sent because NOHZ_BALANCE_KICK is already set and no Idle Load Balance will be performed. We must wait for the sched softirq to be raised on CPU 2 thanks to another part the kernel to come back to clear NOHZ_BALANCE_KICK. The proposed solution clears NOHZ_BALANCE_KICK in schedule_ipi if we can't raise the sched_softirq for the Idle Load Balance. Change since V1: - move the clear of NOHZ_BALANCE_KICK in got_nohz_idle_kick if the ILB can't run on this CPU (as suggested by Peter) Signed-off-by: Vincent Guittot Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1370419991-13870-1-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 58453b8..919bee6 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -633,7 +633,19 @@ void wake_up_nohz_cpu(int cpu) static inline bool got_nohz_idle_kick(void) { int cpu = smp_processor_id(); - return idle_cpu(cpu) && test_bit(NOHZ_BALANCE_KICK, nohz_flags(cpu)); + + if (!test_bit(NOHZ_BALANCE_KICK, nohz_flags(cpu))) + return false; + + if (idle_cpu(cpu) && !need_resched()) + return true; + + /* + * We can't run Idle Load Balance on this CPU for this time so we + * cancel it and clear NOHZ_BALANCE_KICK + */ + clear_bit(NOHZ_BALANCE_KICK, nohz_flags(cpu)); + return false; } #else /* CONFIG_NO_HZ_COMMON */ @@ -1393,8 +1405,9 @@ static void sched_ttwu_pending(void) void scheduler_ipi(void) { - if (llist_empty(&this_rq()->wake_list) && !got_nohz_idle_kick() - && !tick_nohz_full_cpu(smp_processor_id())) + if (llist_empty(&this_rq()->wake_list) + && !tick_nohz_full_cpu(smp_processor_id()) + && !got_nohz_idle_kick()) return; /* @@ -1417,7 +1430,7 @@ void scheduler_ipi(void) /* * Check if someone kicked us for doing the nohz idle load balance. */ - if (unlikely(got_nohz_idle_kick() && !need_resched())) { + if (unlikely(got_nohz_idle_kick())) { this_rq()->idle_balance = 1; raise_softirq_irqoff(SCHED_SOFTIRQ); } -- cgit v0.10.2 From 29bb9e5a75684106a37593ad75ec75ff8312731b Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 24 May 2013 15:23:40 -0400 Subject: tracing/context-tracking: Add preempt_schedule_context() for tracing Dave Jones hit the following bug report: =============================== [ INFO: suspicious RCU usage. ] 3.10.0-rc2+ #1 Not tainted ------------------------------- include/linux/rcupdate.h:771 rcu_read_lock() used illegally while idle! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 RCU used illegally from extended quiescent state! 2 locks held by cc1/63645: #0: (&rq->lock){-.-.-.}, at: [] __schedule+0xed/0x9b0 #1: (rcu_read_lock){.+.+..}, at: [] cpuacct_charge+0x5/0x1f0 CPU: 1 PID: 63645 Comm: cc1 Not tainted 3.10.0-rc2+ #1 [loadavg: 40.57 27.55 13.39 25/277 64369] Hardware name: Gigabyte Technology Co., Ltd. GA-MA78GM-S2H/GA-MA78GM-S2H, BIOS F12a 04/23/2010 0000000000000000 ffff88010f78fcf8 ffffffff816ae383 ffff88010f78fd28 ffffffff810b698d ffff88011c092548 000000000023d073 ffff88011c092500 0000000000000001 ffff88010f78fd60 ffffffff8109d7c5 ffffffff8109d645 Call Trace: [] dump_stack+0x19/0x1b [] lockdep_rcu_suspicious+0xfd/0x130 [] cpuacct_charge+0x185/0x1f0 [] ? cpuacct_charge+0x5/0x1f0 [] update_curr+0xec/0x240 [] put_prev_task_fair+0x228/0x480 [] __schedule+0x161/0x9b0 [] preempt_schedule+0x51/0x80 [] ? __cond_resched_softirq+0x60/0x60 [] ? retint_careful+0x12/0x2e [] ftrace_ops_control_func+0x1dc/0x210 [] ftrace_call+0x5/0x2f [] ? retint_careful+0xb/0x2e [] ? schedule_user+0x5/0x70 [] ? schedule_user+0x5/0x70 [] ? retint_careful+0x12/0x2e ------------[ cut here ]------------ What happened was that the function tracer traced the schedule_user() code that tells RCU that the system is coming back from userspace, and to add the CPU back to the RCU monitoring. Because the function tracer does a preempt_disable/enable_notrace() calls the preempt_enable_notrace() checks the NEED_RESCHED flag. If it is set, then preempt_schedule() is called. But this is called before the user_exit() function can inform the kernel that the CPU is no longer in user mode and needs to be accounted for by RCU. The fix is to create a new preempt_schedule_context() that checks if the kernel is still in user mode and if so to switch it to kernel mode before calling schedule. It also switches back to user mode coming back from schedule in need be. The only user of this currently is the preempt_enable_notrace(), which is only used by the tracing subsystem. Signed-off-by: Steven Rostedt Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1369423420.6828.226.camel@gandalf.local.home Signed-off-by: Ingo Molnar diff --git a/include/linux/preempt.h b/include/linux/preempt.h index 87a03c7..f5d4723 100644 --- a/include/linux/preempt.h +++ b/include/linux/preempt.h @@ -33,9 +33,25 @@ do { \ preempt_schedule(); \ } while (0) +#ifdef CONFIG_CONTEXT_TRACKING + +void preempt_schedule_context(void); + +#define preempt_check_resched_context() \ +do { \ + if (unlikely(test_thread_flag(TIF_NEED_RESCHED))) \ + preempt_schedule_context(); \ +} while (0) +#else + +#define preempt_check_resched_context() preempt_check_resched() + +#endif /* CONFIG_CONTEXT_TRACKING */ + #else /* !CONFIG_PREEMPT */ #define preempt_check_resched() do { } while (0) +#define preempt_check_resched_context() do { } while (0) #endif /* CONFIG_PREEMPT */ @@ -88,7 +104,7 @@ do { \ do { \ preempt_enable_no_resched_notrace(); \ barrier(); \ - preempt_check_resched(); \ + preempt_check_resched_context(); \ } while (0) #else /* !CONFIG_PREEMPT_COUNT */ diff --git a/kernel/context_tracking.c b/kernel/context_tracking.c index 65349f0..6667700 100644 --- a/kernel/context_tracking.c +++ b/kernel/context_tracking.c @@ -71,6 +71,46 @@ void user_enter(void) local_irq_restore(flags); } +#ifdef CONFIG_PREEMPT +/** + * preempt_schedule_context - preempt_schedule called by tracing + * + * The tracing infrastructure uses preempt_enable_notrace to prevent + * recursion and tracing preempt enabling caused by the tracing + * infrastructure itself. But as tracing can happen in areas coming + * from userspace or just about to enter userspace, a preempt enable + * can occur before user_exit() is called. This will cause the scheduler + * to be called when the system is still in usermode. + * + * To prevent this, the preempt_enable_notrace will use this function + * instead of preempt_schedule() to exit user context if needed before + * calling the scheduler. + */ +void __sched notrace preempt_schedule_context(void) +{ + struct thread_info *ti = current_thread_info(); + enum ctx_state prev_ctx; + + if (likely(ti->preempt_count || irqs_disabled())) + return; + + /* + * Need to disable preemption in case user_exit() is traced + * and the tracer calls preempt_enable_notrace() causing + * an infinite recursion. + */ + preempt_disable_notrace(); + prev_ctx = exception_enter(); + preempt_enable_no_resched_notrace(); + + preempt_schedule(); + + preempt_disable_notrace(); + exception_exit(prev_ctx); + preempt_enable_notrace(); +} +EXPORT_SYMBOL_GPL(preempt_schedule_context); +#endif /* CONFIG_PREEMPT */ /** * user_exit - Inform the context tracking that the CPU is -- cgit v0.10.2 From 722a860ecb29aa34ec6f7d7f32b949209e86a2f3 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 14 Jun 2013 10:44:30 -0300 Subject: [media] exynos4-is: Fix FIMC-IS clocks initialization The ISP clock register content is not preserved over the ISP power domain off/on cycle. Instead of setting the clock frequencies once at probe time the clock rates set up is moved to the runtime_resume handler, which is invoked after the related power domain is already enabled, ensuring the clocks are properly configured when the device is actively used. This fixes the FIMC-IS malfunctions and STREAM ON timeout errors accuring on some boards: [ 59.860000] fimc_is_general_irq_handler:583 ISR_NDONE: 5: 0x800003e8, IS_ERROR_UNKNOWN [ 59.860000] fimc_is_general_irq_handler:586 IS_ERROR_TIME_OUT Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park diff --git a/drivers/media/platform/exynos4-is/fimc-is.c b/drivers/media/platform/exynos4-is/fimc-is.c index 520e439..0741945 100644 --- a/drivers/media/platform/exynos4-is/fimc-is.c +++ b/drivers/media/platform/exynos4-is/fimc-is.c @@ -834,23 +834,11 @@ static int fimc_is_probe(struct platform_device *pdev) goto err_clk; } pm_runtime_enable(dev); - /* - * Enable only the ISP power domain, keep FIMC-IS clocks off until - * the whole clock tree is configured. The ISP power domain needs - * be active in order to acces any CMU_ISP clock registers. - */ - ret = pm_runtime_get_sync(dev); - if (ret < 0) - goto err_irq; - - ret = fimc_is_setup_clocks(is); - pm_runtime_put_sync(dev); + ret = pm_runtime_get_sync(dev); if (ret < 0) goto err_irq; - is->clk_init = true; - is->alloc_ctx = vb2_dma_contig_init_ctx(dev); if (IS_ERR(is->alloc_ctx)) { ret = PTR_ERR(is->alloc_ctx); @@ -872,6 +860,8 @@ static int fimc_is_probe(struct platform_device *pdev) if (ret < 0) goto err_dfs; + pm_runtime_put_sync(dev); + dev_dbg(dev, "FIMC-IS registered successfully\n"); return 0; @@ -891,9 +881,11 @@ err_clk: static int fimc_is_runtime_resume(struct device *dev) { struct fimc_is *is = dev_get_drvdata(dev); + int ret; - if (!is->clk_init) - return 0; + ret = fimc_is_setup_clocks(is); + if (ret) + return ret; return fimc_is_enable_clocks(is); } @@ -902,9 +894,7 @@ static int fimc_is_runtime_suspend(struct device *dev) { struct fimc_is *is = dev_get_drvdata(dev); - if (is->clk_init) - fimc_is_disable_clocks(is); - + fimc_is_disable_clocks(is); return 0; } diff --git a/drivers/media/platform/exynos4-is/fimc-is.h b/drivers/media/platform/exynos4-is/fimc-is.h index 606a7c9..d7db133 100644 --- a/drivers/media/platform/exynos4-is/fimc-is.h +++ b/drivers/media/platform/exynos4-is/fimc-is.h @@ -264,7 +264,6 @@ struct fimc_is { spinlock_t slock; struct clk *clocks[ISS_CLKS_MAX]; - bool clk_init; void __iomem *regs; void __iomem *pmu_regs; int irq; -- cgit v0.10.2 From 418a133b714352c35f050d59857f95f769d552d2 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Fri, 14 Jun 2013 10:31:01 +0100 Subject: metag: fix mm/hugetlb.c build breakage Commit 106c992a5ebe ("mm/hugetlb: add more arch-defined huge_pte functions") added an include of to each architecture's (except s390). Unfortunately metag was missed which resulted in build errors when hugetlbfs is enabled (see below). Add the include for metag too to fix the build errors: mm/hugetlb.c In function 'make_huge_pte': mm/hugetlb.c +2250 : error: implicit declaration of function 'huge_pte_mkwrite' mm/hugetlb.c +2250 : error: implicit declaration of function 'huge_pte_mkdirty' ... Signed-off-by: James Hogan Cc: Gerald Schaefer Cc: Andrew Morton Cc: Michal Hocko Signed-off-by: Linus Torvalds diff --git a/arch/metag/include/asm/hugetlb.h b/arch/metag/include/asm/hugetlb.h index f545477..471f481 100644 --- a/arch/metag/include/asm/hugetlb.h +++ b/arch/metag/include/asm/hugetlb.h @@ -2,6 +2,7 @@ #define _ASM_METAG_HUGETLB_H #include +#include static inline int is_hugepage_only_range(struct mm_struct *mm, -- cgit v0.10.2 From c0691143dfe1d42ec9bd89de5921ccb6a27ea1b3 Mon Sep 17 00:00:00 2001 From: David Daney Date: Mon, 17 Jun 2013 08:46:07 -0700 Subject: mn10300: Fix include dependency in irqflags.h et al. We need to pick up the definition of raw_smp_processor_id() from asm/smp.h. For the !SMP case, we need to supply a definition of raw_smp_processor_id(). Because of the include dependencies we cannot use smp_call_func_t in asm/smp.h, but we do need linux/thread_info.h Signed-off-by: David Daney Acked-by: Geert Uytterhoeven Acked-by: David Howells Signed-off-by: Linus Torvalds diff --git a/arch/mn10300/include/asm/irqflags.h b/arch/mn10300/include/asm/irqflags.h index 678f68d..8730c0a 100644 --- a/arch/mn10300/include/asm/irqflags.h +++ b/arch/mn10300/include/asm/irqflags.h @@ -13,9 +13,8 @@ #define _ASM_IRQFLAGS_H #include -#ifndef __ASSEMBLY__ -#include -#endif +/* linux/smp.h <- linux/irqflags.h needs asm/smp.h first */ +#include /* * interrupt control diff --git a/arch/mn10300/include/asm/smp.h b/arch/mn10300/include/asm/smp.h index 6745dbe..56c4241 100644 --- a/arch/mn10300/include/asm/smp.h +++ b/arch/mn10300/include/asm/smp.h @@ -24,6 +24,7 @@ #ifndef __ASSEMBLY__ #include #include +#include #endif #ifdef CONFIG_SMP @@ -85,7 +86,7 @@ extern cpumask_t cpu_boot_map; extern void smp_init_cpus(void); extern void smp_cache_interrupt(void); extern void send_IPI_allbutself(int irq); -extern int smp_nmi_call_function(smp_call_func_t func, void *info, int wait); +extern int smp_nmi_call_function(void (*func)(void *), void *info, int wait); extern void arch_send_call_function_single_ipi(int cpu); extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); @@ -100,6 +101,7 @@ extern void __cpu_die(unsigned int cpu); #ifndef __ASSEMBLY__ static inline void smp_init_cpus(void) {} +#define raw_smp_processor_id() 0 #endif /* __ASSEMBLY__ */ #endif /* CONFIG_SMP */ -- cgit v0.10.2 From 949785996ec2250fa958fc3a924e5186e9a8fa2c Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 19 Jun 2013 11:15:26 -0400 Subject: x86: Fix section mismatch on load_ucode_ap We are in the process of removing all the __cpuinit annotations. While working on making that change, an existing problem was made evident: WARNING: arch/x86/kernel/built-in.o(.text+0x198f2): Section mismatch in reference from the function cpu_init() to the function .init.text:load_ucode_ap() The function cpu_init() references the function __init load_ucode_ap(). This is often because cpu_init lacks a __init annotation or the annotation of load_ucode_ap is wrong. This now appears because in my working tree, cpu_init() is no longer tagged as __cpuinit, and so the audit picks up the mismatch. The 2nd hypothesis from the audit is the correct one, as there was an incorrect __init tag on the prototype in the header (but __cpuinit was used on the function itself.) The audit is telling us that the prototype's __init annotation took effect and the function did land in the .init.text section. Checking with objdump on a mainline tree that still has __cpuinit shows that the __cpuinit on the function takes precedence over the __init on the prototype, but that won't be true once we make __cpuinit a no-op. Even though we are removing __cpuinit, we temporarily align both the function and the prototype on __cpuinit so that the changeset can be applied to stable trees if desired. [ hpa: build fix only, no object code change ] Cc: Thomas Gleixner Cc: Ingo Molnar Cc: "H. Peter Anvin" Cc: stable # 3.9+ Signed-off-by: Paul Gortmaker Link: http://lkml.kernel.org/r/1371654926-11729-1-git-send-email-paul.gortmaker@windriver.com Signed-off-by: H. Peter Anvin diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h index 6825e2e..6bc3985 100644 --- a/arch/x86/include/asm/microcode.h +++ b/arch/x86/include/asm/microcode.h @@ -60,11 +60,11 @@ static inline void __exit exit_amd_microcode(void) {} #ifdef CONFIG_MICROCODE_EARLY #define MAX_UCODE_COUNT 128 extern void __init load_ucode_bsp(void); -extern __init void load_ucode_ap(void); +extern void __cpuinit load_ucode_ap(void); extern int __init save_microcode_in_initrd(void); #else static inline void __init load_ucode_bsp(void) {} -static inline __init void load_ucode_ap(void) {} +static inline void __cpuinit load_ucode_ap(void) {} static inline int __init save_microcode_in_initrd(void) { return 0; -- cgit v0.10.2 From 204ebc0aa30a7115f300cac39fbb7eeb66524881 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Mon, 20 May 2013 15:41:45 +0000 Subject: ACPI / resources: call acpi_get_override_irq() only for legacy IRQ resources acpi_get_override_irq() was added because there was a problem with buggy BIOSes passing wrong IRQ() resource for the RTC IRQ. The commit that added the workaround was 61fd47e0c8476 (ACPI: fix two IRQ8 issues in IOAPIC mode). With ACPI 5 enumerated devices there are typically one or more extended IRQ resources per device (and these IRQs can be shared). However, the acpi_get_override_irq() workaround forces all IRQs in range 0 - 15 (the legacy ISA IRQs) to be edge triggered, active high as can be seen from the dmesg below: ACPI: IRQ 6 override to edge, high ACPI: IRQ 7 override to edge, high ACPI: IRQ 7 override to edge, high ACPI: IRQ 13 override to edge, high Also /proc/interrupts for the I2C controllers (INT33C2 and INT33C3) shows the same thing: 7: 4 0 0 0 IO-APIC-edge INT33C2:00, INT33C3:00 The _CSR method for INT33C2 (and INT33C3) device returns following resource: Interrupt (ResourceConsumer, Level, ActiveLow, Shared,,, ) { 0x00000007, } which states that this is supposed to be level triggered, active low, shared IRQ instead. Fix this by making sure that acpi_get_override_irq() gets only called when we are dealing with legacy IRQ() or IRQNoFlags() descriptors. While we are there, correct pr_warning() to print the right triggering value. This change turns out to be necessary to make DMA work correctly on systems based on the Intel Lynxpoint PCH (Platform Controller Hub). [rjw: Changelog] Signed-off-by: Mika Westerberg Cc: 3.9+ Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c index a3868f6..3322b47 100644 --- a/drivers/acpi/resource.c +++ b/drivers/acpi/resource.c @@ -304,7 +304,8 @@ static void acpi_dev_irqresource_disabled(struct resource *res, u32 gsi) } static void acpi_dev_get_irqresource(struct resource *res, u32 gsi, - u8 triggering, u8 polarity, u8 shareable) + u8 triggering, u8 polarity, u8 shareable, + bool legacy) { int irq, p, t; @@ -317,14 +318,19 @@ static void acpi_dev_get_irqresource(struct resource *res, u32 gsi, * In IO-APIC mode, use overrided attribute. Two reasons: * 1. BIOS bug in DSDT * 2. BIOS uses IO-APIC mode Interrupt Source Override + * + * We do this only if we are dealing with IRQ() or IRQNoFlags() + * resource (the legacy ISA resources). With modern ACPI 5 devices + * using extended IRQ descriptors we take the IRQ configuration + * from _CRS directly. */ - if (!acpi_get_override_irq(gsi, &t, &p)) { + if (legacy && !acpi_get_override_irq(gsi, &t, &p)) { u8 trig = t ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE; u8 pol = p ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH; if (triggering != trig || polarity != pol) { pr_warning("ACPI: IRQ %d override to %s, %s\n", gsi, - t ? "edge" : "level", p ? "low" : "high"); + t ? "level" : "edge", p ? "low" : "high"); triggering = trig; polarity = pol; } @@ -373,7 +379,7 @@ bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index, } acpi_dev_get_irqresource(res, irq->interrupts[index], irq->triggering, irq->polarity, - irq->sharable); + irq->sharable, true); break; case ACPI_RESOURCE_TYPE_EXTENDED_IRQ: ext_irq = &ares->data.extended_irq; @@ -383,7 +389,7 @@ bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index, } acpi_dev_get_irqresource(res, ext_irq->interrupts[index], ext_irq->triggering, ext_irq->polarity, - ext_irq->sharable); + ext_irq->sharable, false); break; default: return false; -- cgit v0.10.2 From 8112006f41fd76ddf4988f8ddd904563db85613c Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 16 Jun 2013 00:38:30 +0200 Subject: ACPI / dock: Take ACPI scan lock in write_undock() Since commit 3757b94 (ACPI / hotplug: Fix concurrency issues and memory leaks) acpi_bus_scan() and acpi_bus_trim() must always be called under acpi_scan_lock, but currently the following scenario violating that requirement is possible: write_undock() handle_eject_request() hotplug_dock_devices() dock_remove_acpi_device() acpi_bus_trim() Fix that by making write_undock() acquire acpi_scan_lock before calling handle_eject_request() as appropriate (begin_undock() is under the lock too in analogy with acpi_dock_deferred_cb()). Signed-off-by: Rafael J. Wysocki Cc: 3.9+ Acked-by: Toshi Kani diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index 4fdea38..ec117c6 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -868,8 +868,10 @@ static ssize_t write_undock(struct device *dev, struct device_attribute *attr, if (!count) return -EINVAL; + acpi_scan_lock_acquire(); begin_undock(dock_station); ret = handle_eject_request(dock_station, ACPI_NOTIFY_EJECT_REQUEST); + acpi_scan_lock_release(); return ret ? ret: count; } static DEVICE_ATTR(undock, S_IWUSR, NULL, write_undock); -- cgit v0.10.2 From 6ee22e9d59151550a55d370b14109bdae8b58bda Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 19 Jun 2013 00:44:45 +0200 Subject: ACPI / PM: Fix error code path for power resources initialization Commit 781d737 (ACPI: Drop power resources driver) introduced a bug in the power resources initialization error code path causing a NULL pointer to be referenced in acpi_release_power_resource() if there's an error triggering a jump to the 'err' label in acpi_add_power_resource(). This happens because the list_node field of struct acpi_power_resource has not been initialized yet at this point and doing a list_del() on it is a bad idea. To prevent this problem from occuring, initialize the list_node field of struct acpi_power_resource upfront. Reported-by: Mika Westerberg Tested-by: Lan Tianyu Signed-off-by: Rafael J. Wysocki Cc: 3.9+ Acked-by: Yasuaki Ishimatsu Reviewed-by: Mika Westerberg diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index f962047..288bb27 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -885,6 +885,7 @@ int acpi_add_power_resource(acpi_handle handle) ACPI_STA_DEFAULT); mutex_init(&resource->resource_lock); INIT_LIST_HEAD(&resource->dependent); + INIT_LIST_HEAD(&resource->list_node); resource->name = device->pnp.bus_id; strcpy(acpi_device_name(device), ACPI_POWER_DEVICE_NAME); strcpy(acpi_device_class(device), ACPI_POWER_CLASS); -- cgit v0.10.2 From b9e95fc65ededbec083aa91b4faa58ad992c0891 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 19 Jun 2013 00:45:34 +0200 Subject: ACPI / LPSS: Power up LPSS devices during enumeration Commit 7cd8407 (ACPI / PM: Do not execute _PS0 for devices without _PSC during initialization) introduced a regression on some systems with Intel Lynxpoint Low-Power Subsystem (LPSS) where some devices need to be powered up during initialization, but their device objects in the ACPI namespace have _PS0 and _PS3 only (without _PSC or power resources). To work around this problem, make the ACPI LPSS driver power up devices it knows about by using a new helper function acpi_device_fix_up_power() that does all of the necessary sanity checks and calls acpi_dev_pm_explicit_set() to put the device into D0. Reported-and-tested-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index 652fd5c..cab13f2 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -164,15 +164,24 @@ static int acpi_lpss_create_device(struct acpi_device *adev, if (dev_desc->clk_required) { ret = register_device_clock(adev, pdata); if (ret) { - /* - * Skip the device, but don't terminate the namespace - * scan. - */ - kfree(pdata); - return 0; + /* Skip the device, but continue the namespace scan. */ + ret = 0; + goto err_out; } } + /* + * This works around a known issue in ACPI tables where LPSS devices + * have _PS0 and _PS3 without _PSC (and no power resources), so + * acpi_bus_init_power() will assume that the BIOS has put them into D0. + */ + ret = acpi_device_fix_up_power(adev); + if (ret) { + /* Skip the device, but continue the namespace scan. */ + ret = 0; + goto err_out; + } + adev->driver_data = pdata; ret = acpi_create_platform_device(adev, id); if (ret > 0) diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c index 318fa32..31c217a 100644 --- a/drivers/acpi/device_pm.c +++ b/drivers/acpi/device_pm.c @@ -290,6 +290,26 @@ int acpi_bus_init_power(struct acpi_device *device) return 0; } +/** + * acpi_device_fix_up_power - Force device with missing _PSC into D0. + * @device: Device object whose power state is to be fixed up. + * + * Devices without power resources and _PSC, but having _PS0 and _PS3 defined, + * are assumed to be put into D0 by the BIOS. However, in some cases that may + * not be the case and this function should be used then. + */ +int acpi_device_fix_up_power(struct acpi_device *device) +{ + int ret = 0; + + if (!device->power.flags.power_resources + && !device->power.flags.explicit_get + && device->power.state == ACPI_STATE_D0) + ret = acpi_dev_pm_explicit_set(device, ACPI_STATE_D0); + + return ret; +} + int acpi_bus_update_power(acpi_handle handle, int *state_p) { struct acpi_device *device; diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 636c59f..c13c919 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -382,6 +382,7 @@ const char *acpi_power_state_string(int state); int acpi_device_get_power(struct acpi_device *device, int *state); int acpi_device_set_power(struct acpi_device *device, int state); int acpi_bus_init_power(struct acpi_device *device); +int acpi_device_fix_up_power(struct acpi_device *device); int acpi_bus_update_power(acpi_handle handle, int *state_p); bool acpi_bus_power_manageable(acpi_handle handle); -- cgit v0.10.2 From 35a2fbc941accd0e9f1bfadd669311786118d874 Mon Sep 17 00:00:00 2001 From: Anders Hammarquist Date: Wed, 19 Jun 2013 01:45:48 +0200 Subject: USB: serial: ti_usb_3410_5052: new device id for Abbot strip port cable Add product id for Abbott strip port cable for Precision meter which uses the TI 3410 chip. Signed-off-by: Anders Hammarquist Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index c92c5ed..e581c25 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -172,7 +172,8 @@ static struct usb_device_id ti_id_table_3410[15+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) }, - { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) }, + { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STEREO_PLUG_ID) }, + { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) }, { USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) }, }; diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h index b353e7e..4a2423e 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.h +++ b/drivers/usb/serial/ti_usb_3410_5052.h @@ -52,7 +52,9 @@ /* Abbott Diabetics vendor and product ids */ #define ABBOTT_VENDOR_ID 0x1a61 -#define ABBOTT_PRODUCT_ID 0x3410 +#define ABBOTT_STEREO_PLUG_ID 0x3410 +#define ABBOTT_PRODUCT_ID ABBOTT_STEREO_PLUG_ID +#define ABBOTT_STRIP_PORT_ID 0x3420 /* Commands */ #define TI_GET_VERSION 0x01 -- cgit v0.10.2 From 8bbd9f04b7d982d1c6aeb5c08f5983b3d0b9e2fe Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Wed, 19 Jun 2013 12:04:26 +0530 Subject: powerpc: Fix bad pmd error with book3E config Book3E uses the hugepd at PMD level and don't encode pte directly at the pmd level. So it will find the lower bits of pmd set and the pmd_bad check throws error. Infact the current code will never take the free_hugepd_range call at all because it will clear the pmd if it find a hugepd pointer. Fix this by clearing bad pmd only if it is not a hugepd pointer. This is regression introduced by e2b3d202d1dba8f3546ed28224ce485bc50010be "powerpc: Switch 16GB and 16MB explicit hugepages to a different page table format" Reported-by: Scott Wood Signed-off-by: Aneesh Kumar K.V Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 237c8e5..77fdd2c 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -592,8 +592,14 @@ static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud, do { pmd = pmd_offset(pud, addr); next = pmd_addr_end(addr, end); - if (pmd_none_or_clear_bad(pmd)) + if (!is_hugepd(pmd)) { + /* + * if it is not hugepd pointer, we should already find + * it cleared. + */ + WARN_ON(!pmd_none_or_clear_bad(pmd)); continue; + } #ifdef CONFIG_PPC_FSL_BOOK3E /* * Increment next by the size of the huge mapping since -- cgit v0.10.2 From 5f63adbb4cb9f952a8daee97f89c8811da5fd68a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 20 Jun 2013 05:46:00 -0300 Subject: [media] s5p makefiles: don't override other selections on obj-[ym] The $obj-m/$obj-y vars should be adding new modules to build, not overriding it. So, it should never use $obj-y := foo.o instead, it should use: $obj-y += foo.o Failing to do that is very bad, as it will suppress needed modules. Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/s5p-jpeg/Makefile b/drivers/media/platform/s5p-jpeg/Makefile index ddc2900..d18cb5e 100644 --- a/drivers/media/platform/s5p-jpeg/Makefile +++ b/drivers/media/platform/s5p-jpeg/Makefile @@ -1,2 +1,2 @@ s5p-jpeg-objs := jpeg-core.o -obj-$(CONFIG_VIDEO_SAMSUNG_S5P_JPEG) := s5p-jpeg.o +obj-$(CONFIG_VIDEO_SAMSUNG_S5P_JPEG) += s5p-jpeg.o diff --git a/drivers/media/platform/s5p-mfc/Makefile b/drivers/media/platform/s5p-mfc/Makefile index 379008c..15f59b3 100644 --- a/drivers/media/platform/s5p-mfc/Makefile +++ b/drivers/media/platform/s5p-mfc/Makefile @@ -1,4 +1,4 @@ -obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC) := s5p-mfc.o +obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC) += s5p-mfc.o s5p-mfc-y += s5p_mfc.o s5p_mfc_intr.o s5p-mfc-y += s5p_mfc_dec.o s5p_mfc_enc.o s5p-mfc-y += s5p_mfc_ctrl.o s5p_mfc_pm.o -- cgit v0.10.2 From abc41254181e901ef5eda2c884ca6cd88a186b6d Mon Sep 17 00:00:00 2001 From: Jed Davis Date: Thu, 20 Jun 2013 04:07:14 +0100 Subject: perf: arm64: Record the user-mode PC in the call chain. With this change, we no longer lose the innermost entry in the user-mode part of the call chain. See also the x86 port, which includes the ip, and the corresponding change in arch/arm. Signed-off-by: Jed Davis Acked-by: Ingo Molnar Acked-by: Will Deacon Cc: stable@vger.kernel.org Signed-off-by: Catalin Marinas diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c index 1e49e5eb..9ba33c4 100644 --- a/arch/arm64/kernel/perf_event.c +++ b/arch/arm64/kernel/perf_event.c @@ -1336,6 +1336,7 @@ void perf_callchain_user(struct perf_callchain_entry *entry, return; } + perf_callchain_store(entry, regs->pc); tail = (struct frame_tail __user *)regs->regs[29]; while (entry->nr < PERF_MAX_STACK_DEPTH && -- cgit v0.10.2 From b52e0a7c4e4100f8683af508664e60e1603070f9 Mon Sep 17 00:00:00 2001 From: Michel Lespinasse Date: Thu, 6 Jun 2013 04:41:15 -0700 Subject: x86: Fix trigger_all_cpu_backtrace() implementation The following change fixes the x86 implementation of trigger_all_cpu_backtrace(), which was previously (accidentally, as far as I can tell) disabled to always return false as on architectures that do not implement this function. trigger_all_cpu_backtrace(), as defined in include/linux/nmi.h, should call arch_trigger_all_cpu_backtrace() if available, or return false if the underlying arch doesn't implement this function. x86 did provide a suitable arch_trigger_all_cpu_backtrace() implementation, but it wasn't actually being used because it was declared in asm/nmi.h, which linux/nmi.h doesn't include. Also, linux/nmi.h couldn't easily be fixed by including asm/nmi.h, because that file is not available on all architectures. I am proposing to fix this by moving the x86 definition of arch_trigger_all_cpu_backtrace() to asm/irq.h. Tested via: echo l > /proc/sysrq-trigger Before the change, this uses a fallback implementation which shows backtraces on active CPUs (using smp_call_function_interrupt() ) After the change, this shows NMI backtraces on all CPUs Signed-off-by: Michel Lespinasse Cc: Linus Torvalds Link: http://lkml.kernel.org/r/1370518875-1346-1-git-send-email-walken@google.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/include/asm/irq.h b/arch/x86/include/asm/irq.h index ba870bb..57873be 100644 --- a/arch/x86/include/asm/irq.h +++ b/arch/x86/include/asm/irq.h @@ -41,4 +41,9 @@ extern int vector_used_by_percpu_irq(unsigned int vector); extern void init_ISA_irqs(void); +#ifdef CONFIG_X86_LOCAL_APIC +void arch_trigger_all_cpu_backtrace(void); +#define arch_trigger_all_cpu_backtrace arch_trigger_all_cpu_backtrace +#endif + #endif /* _ASM_X86_IRQ_H */ diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h index c0fa356..86f9301 100644 --- a/arch/x86/include/asm/nmi.h +++ b/arch/x86/include/asm/nmi.h @@ -18,9 +18,7 @@ extern int proc_nmi_enabled(struct ctl_table *, int , void __user *, size_t *, loff_t *); extern int unknown_nmi_panic; -void arch_trigger_all_cpu_backtrace(void); -#define arch_trigger_all_cpu_backtrace arch_trigger_all_cpu_backtrace -#endif +#endif /* CONFIG_X86_LOCAL_APIC */ #define NMI_FLAG_FIRST 1 diff --git a/arch/x86/kernel/apic/hw_nmi.c b/arch/x86/kernel/apic/hw_nmi.c index 31cb9ae..a698d71 100644 --- a/arch/x86/kernel/apic/hw_nmi.c +++ b/arch/x86/kernel/apic/hw_nmi.c @@ -9,6 +9,7 @@ * */ #include +#include #include #include -- cgit v0.10.2 From 8b6fd652641e5ab1892d092e73e83d49291ed638 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 12 Jun 2013 19:30:27 +0800 Subject: irqchip: gic: call gic_cpu_init() as well in CPU_STARTING_FROZEN case Commit c011470 (irqchip: gic: Perform the gic_secondary_init() call via CPU notifier) moves gic_secondary_init() that used to be called in .smp_secondary_init hook into a notifier call. But it changes the system behavior a little bit. Before the commit, gic_cpu_init() is called not only when kernel brings up the secondary cores but also when system resuming procedure hot-plugs the cores back to kernel. While after the commit, the function will not be called in the latter case, where the 'action' will not be CPU_STARTING but CPU_STARTING_FROZEN. This behavior difference at least causes the following suspend/resume regression on imx6q. $ echo mem > /sys/power/state PM: Syncing filesystems ... done. PM: Preparing system for mem sleep mmc1: card e624 removed Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: Entering mem sleep PM: suspend of devices complete after 5.930 msecs PM: suspend devices took 0.010 seconds PM: late suspend of devices complete after 0.343 msecs PM: noirq suspend of devices complete after 0.828 msecs Disabling non-boot CPUs ... CPU1: shutdown CPU2: shutdown CPU3: shutdown Enabling non-boot CPUs ... CPU1: Booted secondary processor INFO: rcu_sched detected stalls on CPUs/tasks: { 1 2 3} (detected by 0, t=2102 jiffies, g=4294967169, c=4294967168, q=17) Task dump for CPU 1: swapper/1 R running 0 0 1 0x00000000 Backtrace: [] (0xbf895ff4) from [<00000000>] ( (null)) Backtrace aborted due to bad frame pointer <8007ccdc> Task dump for CPU 2: swapper/2 R running 0 0 1 0x00000000 Backtrace: [<8075dbdc>] (0x8075dbdc) from [<00000000>] ( (null)) Backtrace aborted due to bad frame pointer <00000002> Task dump for CPU 3: swapper/3 R running 0 0 1 0x00000000 Backtrace: [<8075dbdc>] (0x8075dbdc) from [<00000000>] ( (null)) Fix the regression by checking 'action' being CPU_STARTING_FROZEN to have gic_cpu_init() called for secondary cores when system resumes. Signed-off-by: Shawn Guo Acked-by: Catalin Marinas Tested-by: Joseph Lo Signed-off-by: Arnd Bergmann diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index 1760ceb..19ceaa6 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -705,7 +705,7 @@ static int gic_irq_domain_xlate(struct irq_domain *d, static int __cpuinit gic_secondary_init(struct notifier_block *nfb, unsigned long action, void *hcpu) { - if (action == CPU_STARTING) + if (action == CPU_STARTING || action == CPU_STARTING_FROZEN) gic_cpu_init(&gic_data[0]); return NOTIFY_OK; } -- cgit v0.10.2 From bb69ee27b96110c509d5b92c9ee541d81a821706 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 20 Jun 2013 10:35:53 -0300 Subject: [media] Fix build when drivers are builtin and frontend modules There are a large number of reports that the media build is not compiling when some drivers are compiled as builtin, while the needed frontends are compiled as module. On the last one of such reports: From: kbuild test robot Subject: saa7134-dvb.c:undefined reference to `zl10039_attach' The .config file has: CONFIG_VIDEO_SAA7134=y CONFIG_VIDEO_SAA7134_DVB=y # CONFIG_MEDIA_ATTACH is not set CONFIG_DVB_ZL10039=m And it produces all those errors: drivers/built-in.o: In function `set_type': tuner-core.c:(.text+0x2f263e): undefined reference to `tea5767_attach' tuner-core.c:(.text+0x2f273e): undefined reference to `tda9887_attach' drivers/built-in.o: In function `tuner_probe': tuner-core.c:(.text+0x2f2d20): undefined reference to `tea5767_autodetection' drivers/built-in.o: In function `av7110_attach': av7110.c:(.text+0x330bda): undefined reference to `ves1x93_attach' av7110.c:(.text+0x330bf7): undefined reference to `stv0299_attach' av7110.c:(.text+0x330c63): undefined reference to `tda8083_attach' av7110.c:(.text+0x330d09): undefined reference to `ves1x93_attach' av7110.c:(.text+0x330d33): undefined reference to `tda8083_attach' av7110.c:(.text+0x330d5d): undefined reference to `stv0297_attach' av7110.c:(.text+0x330dbe): undefined reference to `stv0299_attach' drivers/built-in.o: In function `tuner_attach_dtt7520x': ngene-cards.c:(.text+0x3381cb): undefined reference to `dvb_pll_attach' drivers/built-in.o: In function `demod_attach_lg330x': ngene-cards.c:(.text+0x33828a): undefined reference to `lgdt330x_attach' drivers/built-in.o: In function `demod_attach_stv0900': ngene-cards.c:(.text+0x3383d5): undefined reference to `stv090x_attach' drivers/built-in.o: In function `cineS2_probe': ngene-cards.c:(.text+0x338b7f): undefined reference to `drxk_attach' drivers/built-in.o: In function `configure_tda827x_fe': saa7134-dvb.c:(.text+0x346ae7): undefined reference to `tda10046_attach' drivers/built-in.o: In function `dvb_init': saa7134-dvb.c:(.text+0x347283): undefined reference to `mt352_attach' saa7134-dvb.c:(.text+0x3472cd): undefined reference to `mt352_attach' saa7134-dvb.c:(.text+0x34731c): undefined reference to `tda10046_attach' saa7134-dvb.c:(.text+0x34733c): undefined reference to `tda10046_attach' saa7134-dvb.c:(.text+0x34735c): undefined reference to `tda10046_attach' saa7134-dvb.c:(.text+0x347378): undefined reference to `tda10046_attach' saa7134-dvb.c:(.text+0x3473db): undefined reference to `tda10046_attach' drivers/built-in.o:saa7134-dvb.c:(.text+0x347502): more undefined references to `tda10046_attach' follow drivers/built-in.o: In function `dvb_init': saa7134-dvb.c:(.text+0x347812): undefined reference to `mt352_attach' saa7134-dvb.c:(.text+0x347951): undefined reference to `mt312_attach' saa7134-dvb.c:(.text+0x3479a9): undefined reference to `mt312_attach' >> saa7134-dvb.c:(.text+0x3479c1): undefined reference to `zl10039_attach' This is happening because a builtin module can't use directly a symbol found on a module. By enabling CONFIG_MEDIA_ATTACH, the configuration becomes valid, as dvb_attach() macro loads the module if needed, making the symbol available to the builtin module. While this bug started to appear after the patches that use IS_DEFINED macro (like changeset 7b34be71db533f3e0cf93d53cf62d036cdb5418a), this bug is a way ancient than that. The thing is that, before the IS_DEFINED() patches, the logic used to be: && defined(MODULE)) struct dvb_frontend *zl10039_attach(struct dvb_frontend *fe, u8 i2c_addr, struct i2c_adapter *i2c); static inline struct dvb_frontend *zl10039_attach(struct dvb_frontend *fe, u8 i2c_addr, struct i2c_adapter *i2c) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } The above code, with the .config file used, was evoluting to FALSE (instead of TRUE as it should be, as CONFIG_DVB_ZL10039 is 'm'), and were adding the static inline code at saa7134-dvb, instead of the external call. So, while it weren't producing any compilation error, the code weren't working either. So, as the overhead for using CONFIG_MEDIA_ATTACH is minimal, just enable it, if MODULES is defined. Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig index 7f5a7ca..8270388 100644 --- a/drivers/media/Kconfig +++ b/drivers/media/Kconfig @@ -136,9 +136,9 @@ config DVB_NET # This Kconfig option is used by both PCI and USB drivers config TTPCI_EEPROM - tristate - depends on I2C - default n + tristate + depends on I2C + default n source "drivers/media/dvb-core/Kconfig" @@ -189,6 +189,12 @@ config MEDIA_SUBDRV_AUTOSELECT If unsure say Y. +config MEDIA_ATTACH + bool + depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT + depends on MODULES + default MODULES + source "drivers/media/i2c/Kconfig" source "drivers/media/tuners/Kconfig" source "drivers/media/dvb-frontends/Kconfig" diff --git a/drivers/media/tuners/Kconfig b/drivers/media/tuners/Kconfig index f6768ca..15665de 100644 --- a/drivers/media/tuners/Kconfig +++ b/drivers/media/tuners/Kconfig @@ -1,23 +1,3 @@ -config MEDIA_ATTACH - bool "Load and attach frontend and tuner driver modules as needed" - depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT - depends on MODULES - default y if !EXPERT - help - Remove the static dependency of DVB card drivers on all - frontend modules for all possible card variants. Instead, - allow the card drivers to only load the frontend modules - they require. - - Also, tuner module will automatically load a tuner driver - when needed, for analog mode. - - This saves several KBytes of memory. - - Note: You will need module-init-tools v3.2 or later for this feature. - - If unsure say Y. - # Analog TV tuners, auto-loaded via tuner.ko config MEDIA_TUNER tristate -- cgit v0.10.2 From 7995bd287134f6c8f80d94bebe7396f05a9bc42b Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 20 Jun 2013 18:58:36 +0400 Subject: splice: don't pass the address of ->f_pos to methods Signed-off-by: Al Viro diff --git a/fs/internal.h b/fs/internal.h index eaa75f7..6812158 100644 --- a/fs/internal.h +++ b/fs/internal.h @@ -132,6 +132,12 @@ extern struct dentry *__d_alloc(struct super_block *, const struct qstr *); extern ssize_t __kernel_write(struct file *, const char *, size_t, loff_t *); /* + * splice.c + */ +extern long do_splice_direct(struct file *in, loff_t *ppos, struct file *out, + loff_t *opos, size_t len, unsigned int flags); + +/* * pipe.c */ extern const struct file_operations pipefifo_fops; diff --git a/fs/read_write.c b/fs/read_write.c index 0343000..2cefa41 100644 --- a/fs/read_write.c +++ b/fs/read_write.c @@ -1064,6 +1064,7 @@ static ssize_t do_sendfile(int out_fd, int in_fd, loff_t *ppos, struct fd in, out; struct inode *in_inode, *out_inode; loff_t pos; + loff_t out_pos; ssize_t retval; int fl; @@ -1077,12 +1078,14 @@ static ssize_t do_sendfile(int out_fd, int in_fd, loff_t *ppos, if (!(in.file->f_mode & FMODE_READ)) goto fput_in; retval = -ESPIPE; - if (!ppos) - ppos = &in.file->f_pos; - else + if (!ppos) { + pos = in.file->f_pos; + } else { + pos = *ppos; if (!(in.file->f_mode & FMODE_PREAD)) goto fput_in; - retval = rw_verify_area(READ, in.file, ppos, count); + } + retval = rw_verify_area(READ, in.file, &pos, count); if (retval < 0) goto fput_in; count = retval; @@ -1099,7 +1102,8 @@ static ssize_t do_sendfile(int out_fd, int in_fd, loff_t *ppos, retval = -EINVAL; in_inode = file_inode(in.file); out_inode = file_inode(out.file); - retval = rw_verify_area(WRITE, out.file, &out.file->f_pos, count); + out_pos = out.file->f_pos; + retval = rw_verify_area(WRITE, out.file, &out_pos, count); if (retval < 0) goto fput_out; count = retval; @@ -1107,7 +1111,6 @@ static ssize_t do_sendfile(int out_fd, int in_fd, loff_t *ppos, if (!max) max = min(in_inode->i_sb->s_maxbytes, out_inode->i_sb->s_maxbytes); - pos = *ppos; if (unlikely(pos + count > max)) { retval = -EOVERFLOW; if (pos >= max) @@ -1126,18 +1129,23 @@ static ssize_t do_sendfile(int out_fd, int in_fd, loff_t *ppos, if (in.file->f_flags & O_NONBLOCK) fl = SPLICE_F_NONBLOCK; #endif - retval = do_splice_direct(in.file, ppos, out.file, count, fl); + retval = do_splice_direct(in.file, &pos, out.file, &out_pos, count, fl); if (retval > 0) { add_rchar(current, retval); add_wchar(current, retval); fsnotify_access(in.file); fsnotify_modify(out.file); + out.file->f_pos = out_pos; + if (ppos) + *ppos = pos; + else + in.file->f_pos = pos; } inc_syscr(current); inc_syscw(current); - if (*ppos > max) + if (pos > max) retval = -EOVERFLOW; fput_out: diff --git a/fs/splice.c b/fs/splice.c index e6b2559..9eca476 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -1274,7 +1274,7 @@ static int direct_splice_actor(struct pipe_inode_info *pipe, { struct file *file = sd->u.file; - return do_splice_from(pipe, file, &file->f_pos, sd->total_len, + return do_splice_from(pipe, file, sd->opos, sd->total_len, sd->flags); } @@ -1294,7 +1294,7 @@ static int direct_splice_actor(struct pipe_inode_info *pipe, * */ long do_splice_direct(struct file *in, loff_t *ppos, struct file *out, - size_t len, unsigned int flags) + loff_t *opos, size_t len, unsigned int flags) { struct splice_desc sd = { .len = len, @@ -1302,6 +1302,7 @@ long do_splice_direct(struct file *in, loff_t *ppos, struct file *out, .flags = flags, .pos = *ppos, .u.file = out, + .opos = opos, }; long ret; @@ -1325,7 +1326,7 @@ static long do_splice(struct file *in, loff_t __user *off_in, { struct pipe_inode_info *ipipe; struct pipe_inode_info *opipe; - loff_t offset, *off; + loff_t offset; long ret; ipipe = get_pipe_info(in); @@ -1356,13 +1357,15 @@ static long do_splice(struct file *in, loff_t __user *off_in, return -EINVAL; if (copy_from_user(&offset, off_out, sizeof(loff_t))) return -EFAULT; - off = &offset; - } else - off = &out->f_pos; + } else { + offset = out->f_pos; + } - ret = do_splice_from(ipipe, out, off, len, flags); + ret = do_splice_from(ipipe, out, &offset, len, flags); - if (off_out && copy_to_user(off_out, off, sizeof(loff_t))) + if (!off_out) + out->f_pos = offset; + else if (copy_to_user(off_out, &offset, sizeof(loff_t))) ret = -EFAULT; return ret; @@ -1376,13 +1379,15 @@ static long do_splice(struct file *in, loff_t __user *off_in, return -EINVAL; if (copy_from_user(&offset, off_in, sizeof(loff_t))) return -EFAULT; - off = &offset; - } else - off = &in->f_pos; + } else { + offset = in->f_pos; + } - ret = do_splice_to(in, off, opipe, len, flags); + ret = do_splice_to(in, &offset, opipe, len, flags); - if (off_in && copy_to_user(off_in, off, sizeof(loff_t))) + if (!off_in) + in->f_pos = offset; + else if (copy_to_user(off_in, &offset, sizeof(loff_t))) ret = -EFAULT; return ret; diff --git a/include/linux/fs.h b/include/linux/fs.h index 43db02e..65c2be2 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2414,8 +2414,6 @@ extern ssize_t generic_file_splice_write(struct pipe_inode_info *, struct file *, loff_t *, size_t, unsigned int); extern ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe, struct file *out, loff_t *, size_t len, unsigned int flags); -extern long do_splice_direct(struct file *in, loff_t *ppos, struct file *out, - size_t len, unsigned int flags); extern void file_ra_state_init(struct file_ra_state *ra, struct address_space *mapping); diff --git a/include/linux/splice.h b/include/linux/splice.h index 09a545a..74575cb 100644 --- a/include/linux/splice.h +++ b/include/linux/splice.h @@ -35,6 +35,7 @@ struct splice_desc { void *data; /* cookie */ } u; loff_t pos; /* file position */ + loff_t *opos; /* sendfile: output position */ size_t num_spliced; /* number of bytes already spliced */ bool need_wakeup; /* need to wake up writer */ }; -- cgit v0.10.2 From 8444d5c69549aa0f0b574cc608742d4669e1cc01 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Wed, 19 Jun 2013 10:02:28 -0400 Subject: drm/radeon: update lockup tracking when scheduling in empty ring MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There might be issue with lockup detection when scheduling on an empty ring that have been sitting idle for a while. Thus update the lockup tracking data when scheduling new work in an empty ring. Signed-off-by: Jerome Glisse Tested-by: Andy Lutomirski Cc: stable@vger.kernel.org Reviewed-by: Christian König Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c index e17faa7..82434018 100644 --- a/drivers/gpu/drm/radeon/radeon_ring.c +++ b/drivers/gpu/drm/radeon/radeon_ring.c @@ -402,6 +402,13 @@ int radeon_ring_alloc(struct radeon_device *rdev, struct radeon_ring *ring, unsi return -ENOMEM; /* Align requested size with padding so unlock_commit can * pad safely */ + radeon_ring_free_size(rdev, ring); + if (ring->ring_free_dw == (ring->ring_size / 4)) { + /* This is an empty ring update lockup info to avoid + * false positive. + */ + radeon_ring_lockup_update(ring); + } ndw = (ndw + ring->align_mask) & ~ring->align_mask; while (ndw > (ring->ring_free_dw - 1)) { radeon_ring_free_size(rdev, ring); -- cgit v0.10.2 From 58bd0c69ffa27ea2309959836811e88004d73720 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Wed, 29 May 2013 12:05:59 -0700 Subject: target/iscsi: Fix op=disable + error handling cases in np_store_iser Writing 0 when iser was not previously enabled, so succeed but do nothing so that user-space code doesn't need a try: catch block when ib_isert logic is not available. Also, return actual error from add_network_portal using PTR_ERR during op=enable failure. Signed-off-by: Andy Grover Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/iscsi/iscsi_target_configfs.c b/drivers/target/iscsi/iscsi_target_configfs.c index 13e9e71..fe4a5a20 100644 --- a/drivers/target/iscsi/iscsi_target_configfs.c +++ b/drivers/target/iscsi/iscsi_target_configfs.c @@ -155,7 +155,7 @@ static ssize_t lio_target_np_store_iser( struct iscsi_tpg_np *tpg_np_iser = NULL; char *endptr; u32 op; - int rc; + int rc = 0; op = simple_strtoul(page, &endptr, 0); if ((op != 1) && (op != 0)) { @@ -174,22 +174,25 @@ static ssize_t lio_target_np_store_iser( return -EINVAL; if (op) { - int rc = request_module("ib_isert"); - if (rc != 0) + rc = request_module("ib_isert"); + if (rc != 0) { pr_warn("Unable to request_module for ib_isert\n"); + rc = 0; + } tpg_np_iser = iscsit_tpg_add_network_portal(tpg, &np->np_sockaddr, np->np_ip, tpg_np, ISCSI_INFINIBAND); - if (!tpg_np_iser || IS_ERR(tpg_np_iser)) + if (IS_ERR(tpg_np_iser)) { + rc = PTR_ERR(tpg_np_iser); goto out; + } } else { tpg_np_iser = iscsit_tpg_locate_child_np(tpg_np, ISCSI_INFINIBAND); - if (!tpg_np_iser) - goto out; - - rc = iscsit_tpg_del_network_portal(tpg, tpg_np_iser); - if (rc < 0) - goto out; + if (tpg_np_iser) { + rc = iscsit_tpg_del_network_portal(tpg, tpg_np_iser); + if (rc < 0) + goto out; + } } printk("lio_target_np_store_iser() done, op: %d\n", op); @@ -198,7 +201,7 @@ static ssize_t lio_target_np_store_iser( return count; out: iscsit_put_tpg(tpg); - return -EINVAL; + return rc; } TF_NP_BASE_ATTR(lio_target, iser, S_IRUGO | S_IWUSR); -- cgit v0.10.2 From 58807a524782744aed5fb7b8fefac7134721331a Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 20 Jun 2013 16:36:17 -0700 Subject: iscsi-target: Remove left over v3.10-rc debug printks Reported-by: Andy Grover Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/iscsi/iscsi_target_configfs.c b/drivers/target/iscsi/iscsi_target_configfs.c index fe4a5a20..8d8b3ff 100644 --- a/drivers/target/iscsi/iscsi_target_configfs.c +++ b/drivers/target/iscsi/iscsi_target_configfs.c @@ -195,8 +195,6 @@ static ssize_t lio_target_np_store_iser( } } - printk("lio_target_np_store_iser() done, op: %d\n", op); - iscsit_put_tpg(tpg); return count; out: diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c index bb5d5c5..3402241 100644 --- a/drivers/target/iscsi/iscsi_target_login.c +++ b/drivers/target/iscsi/iscsi_target_login.c @@ -984,8 +984,6 @@ int iscsi_target_setup_login_socket( } np->np_transport = t; - printk("Set np->np_transport to %p -> %s\n", np->np_transport, - np->np_transport->name); return 0; } @@ -1002,7 +1000,6 @@ int iscsit_accept_np(struct iscsi_np *np, struct iscsi_conn *conn) conn->sock = new_sock; conn->login_family = np->np_sockaddr.ss_family; - printk("iSCSI/TCP: Setup conn->sock from new_sock: %p\n", new_sock); if (np->np_sockaddr.ss_family == AF_INET6) { memset(&sock_in6, 0, sizeof(struct sockaddr_in6)); diff --git a/drivers/target/iscsi/iscsi_target_nego.c b/drivers/target/iscsi/iscsi_target_nego.c index 7ad9120..cd5018f 100644 --- a/drivers/target/iscsi/iscsi_target_nego.c +++ b/drivers/target/iscsi/iscsi_target_nego.c @@ -721,9 +721,6 @@ int iscsi_target_locate_portal( start += strlen(key) + strlen(value) + 2; } - - printk("i_buf: %s, s_buf: %s, t_buf: %s\n", i_buf, s_buf, t_buf); - /* * See 5.3. Login Phase. */ -- cgit v0.10.2 From b8cb62f82103083a6e8fa5470bfe634a2c06514d Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sun, 16 Jun 2013 21:27:12 +0100 Subject: x86/efi: Fix dummy variable buffer allocation 1. Check for allocation failure 2. Clear the buffer contents, as they may actually be written to flash 3. Don't leak the buffer Compile-tested only. [ Tested successfully on my buggy ASUS machine - Matt ] Signed-off-by: Ben Hutchings Cc: stable@vger.kernel.org Signed-off-by: Matt Fleming diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 5ae2eb0..d2fbced 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -1069,7 +1069,10 @@ efi_status_t efi_query_variable_store(u32 attributes, unsigned long size) * that by attempting to use more space than is available. */ unsigned long dummy_size = remaining_size + 1024; - void *dummy = kmalloc(dummy_size, GFP_ATOMIC); + void *dummy = kzalloc(dummy_size, GFP_ATOMIC); + + if (!dummy) + return EFI_OUT_OF_RESOURCES; status = efi.set_variable(efi_dummy_name, &EFI_DUMMY_GUID, EFI_VARIABLE_NON_VOLATILE | @@ -1089,6 +1092,8 @@ efi_status_t efi_query_variable_store(u32 attributes, unsigned long size) 0, dummy); } + kfree(dummy); + /* * The runtime code may now have triggered a garbage collection * run, so check the variable info again -- cgit v0.10.2 From 945fb136dfcb5291b4fb2abd4fd1edf790de44ff Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Jun 2013 11:01:38 +0400 Subject: aout32 coredump compat fix dump_seek() does SEEK_CUR, not SEEK_SET; native binfmt_aout handles it correctly (seeks by PAGE_SIZE - sizeof(struct user), getting the current position to PAGE_SIZE), compat one seeks by PAGE_SIZE and ends up at PAGE_SIZE + already written... Signed-off-by: Al Viro diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c index 805078e..52ff81c 100644 --- a/arch/x86/ia32/ia32_aout.c +++ b/arch/x86/ia32/ia32_aout.c @@ -192,7 +192,7 @@ static int aout_core_dump(long signr, struct pt_regs *regs, struct file *file, /* struct user */ DUMP_WRITE(&dump, sizeof(dump)); /* Now dump all of the user data. Include malloced stuff as well */ - DUMP_SEEK(PAGE_SIZE); + DUMP_SEEK(PAGE_SIZE - sizeof(dump)); /* now we start writing out the user space info */ set_fs(USER_DS); /* Dump the data area */ -- cgit v0.10.2 From 9e895ace5d82df8929b16f58e9f515f6d54ab82d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 22 Jun 2013 09:47:31 -1000 Subject: Linux 3.10-rc7 diff --git a/Makefile b/Makefile index c6863b5..0142c93 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 10 SUBLEVEL = 0 -EXTRAVERSION = -rc6 +EXTRAVERSION = -rc7 NAME = Unicycling Gorilla # *DOCUMENTATION* -- cgit v0.10.2