From add7b58e7558dd2894f3c17ca8574099fcba5c15 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 24 Oct 2005 22:11:57 +0100 Subject: [SERIAL] support the Exsys EX-4055 4S four-port card Tested by Wolfgang Denk with this device: 00:0f.0 Network controller: PLX Technology, Inc. PCI <-> IOBus Bridge (rev 01) Subsystem: Exsys EX-4055 4S(16C550) RS-232 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Signed-off-by: Russell King diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 0e21f58..5da61eb 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -226,8 +226,10 @@ static int __devinit pci_plx9050_init(struct pci_dev *dev) } irq_config = 0x41; - if (dev->vendor == PCI_VENDOR_ID_PANACOM) + if (dev->vendor == PCI_VENDOR_ID_PANACOM || + dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS) { irq_config = 0x43; + } if ((dev->vendor == PCI_VENDOR_ID_PLX) && (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) { /* @@ -664,6 +666,15 @@ static struct pci_serial_quirk pci_serial_quirks[] = { { .vendor = PCI_VENDOR_ID_PLX, .device = PCI_DEVICE_ID_PLX_9050, + .subvendor = PCI_SUBVENDOR_ID_EXSYS, + .subdevice = PCI_SUBDEVICE_ID_EXSYS_4055, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_plx9050_exit), + }, + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_9050, .subvendor = PCI_SUBVENDOR_ID_KEYSPAN, .subdevice = PCI_SUBDEVICE_ID_KEYSPAN_SX2, .init = pci_plx9050_init, @@ -927,6 +938,7 @@ enum pci_board_num_t { pbn_panacom, pbn_panacom2, pbn_panacom4, + pbn_exsys_4055, pbn_plx_romulus, pbn_oxsemi, pbn_intel_i960, @@ -1292,6 +1304,13 @@ static struct pciserial_board pci_boards[] __devinitdata = { .reg_shift = 7, }, + [pbn_exsys_4055] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + /* I think this entry is broken - the first_offset looks wrong --rmk */ [pbn_plx_romulus] = { .flags = FL_BASE2, @@ -1853,6 +1872,10 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_SUBVENDOR_ID_CHASE_PCIRAS, PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0, pbn_b2_8_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_EXSYS, + PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0, + pbn_exsys_4055 }, /* * Megawolf Romulus PCI Serial Card, from Mike Hudson * (Exoray@isys.ca) diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index f74ed94..ca0691c 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2696,6 +2696,7 @@ #define PCI_SUBVENDOR_ID_EXSYS 0xd84d #define PCI_SUBDEVICE_ID_EXSYS_4014 0x4014 +#define PCI_SUBDEVICE_ID_EXSYS_4055 0x4055 #define PCI_VENDOR_ID_TIGERJET 0xe159 #define PCI_DEVICE_ID_TIGERJET_300 0x0001 -- cgit v0.10.2 From 551f8f0e87becb415c522adccab524a7a05ca83a Mon Sep 17 00:00:00 2001 From: Justin Chen Date: Mon, 24 Oct 2005 22:16:38 +0100 Subject: [SERIAL] new hp diva console port Add the new ID 0x132a and configure the new PCI Diva console port. This device supports only 1 single console UART. Signed-off-by: Andrew Morton Signed-off-by: Russell King diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 5da61eb..5c3c039 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -152,6 +152,7 @@ static int __devinit pci_hp_diva_init(struct pci_dev *dev) rc = 4; break; case PCI_DEVICE_ID_HP_DIVA_POWERBAR: + case PCI_DEVICE_ID_HP_DIVA_HURRICANE: rc = 1; break; } diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index ca0691c..71834f0 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -723,6 +723,7 @@ #define PCI_DEVICE_ID_HP_DIVA_EVEREST 0x1282 #define PCI_DEVICE_ID_HP_DIVA_AUX 0x1290 #define PCI_DEVICE_ID_HP_DIVA_RMP3 0x1301 +#define PCI_DEVICE_ID_HP_DIVA_HURRICANE 0x132a #define PCI_DEVICE_ID_HP_CISS 0x3210 #define PCI_DEVICE_ID_HP_CISSA 0x3220 #define PCI_DEVICE_ID_HP_CISSB 0x3222 -- cgit v0.10.2 From c34e152a494c0de8d920b70163d95235a51f4120 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Mon, 24 Oct 2005 22:30:10 +0100 Subject: [ARM] fix sharp zaurus c-3000 compile failure without CONFIG_FB_PXA This fixes compile problem when CONFIG_FB_PXA is not set. LD .tmp_vmlinux1 arch/arm/mach-pxa/built-in.o(.text+0x1d74): In function `spitz_get_hsync_len': : undefined reference to `pxafb_get_hsync_time' make: *** [.tmp_vmlinux1] Error 1 3.46user 0.46system 5.10 (0m5.106s) elapsed 77.01%CPU Signed-off-by: Pavel Machek Signed-off-by: Richard Purdie Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c index 850538f..370df11 100644 --- a/arch/arm/mach-pxa/corgi_lcd.c +++ b/arch/arm/mach-pxa/corgi_lcd.c @@ -488,6 +488,7 @@ static int is_pxafb_device(struct device * dev, void * data) unsigned long spitz_get_hsync_len(void) { +#ifdef CONFIG_FB_PXA if (!spitz_pxafb_dev) { spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device); if (!spitz_pxafb_dev) @@ -496,6 +497,7 @@ unsigned long spitz_get_hsync_len(void) if (!get_hsync_time) get_hsync_time = symbol_get(pxafb_get_hsync_time); if (!get_hsync_time) +#endif return 0; return pxafb_get_hsync_time(spitz_pxafb_dev); -- cgit v0.10.2 From 7edc24c4d1924e79d3853a8d7563bcce73f31e5d Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Wed, 26 Oct 2005 15:04:21 +0100 Subject: [ARM] 3032/1: sparse: complains about generic_fls() prototype in asm-arm/bitops.h Patch from Ian Campbell Sparse complains about the definition of generic_fls in asm-arm/bitops.h: CHECK /home/icampbell/devel/kernel/2.6/arch/arm/mach-pxa/viper.c include2/asm/bitops.h:350:34: error: marked inline, but without a definition The definition is unnecessary since linux/bitops.h defines generic_fls before including asm/bitops.h and asm/bitops.h should not be included directly. There are still some places where asm/bitops.h is directly included, but I think that code should be fixed. I was a little wary of the patch for this reason but lubbock, mainstone and assabet all build OK and so do my in house boards... ARM is the only arch with the generic_fls prototype in this way. Signed-off-by: Ian Campbell Signed-off-by: Russell King diff --git a/include/asm-arm/bitops.h b/include/asm-arm/bitops.h index aad7aad..e007dd9 100644 --- a/include/asm-arm/bitops.h +++ b/include/asm-arm/bitops.h @@ -347,7 +347,6 @@ static inline unsigned long __ffs(unsigned long word) * the clz instruction for much better code efficiency. */ -static __inline__ int generic_fls(int x); #define fls(x) \ ( __builtin_constant_p(x) ? generic_fls(x) : \ ({ int __r; asm("clz\t%0, %1" : "=r"(__r) : "r"(x) : "cc"); 32-__r; }) ) -- cgit v0.10.2 From 8712e553562bbbed9b3a99370f08e9bc25908a76 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 26 Oct 2005 01:58:58 -0700 Subject: [PATCH] md: make sure mdthreads will always respond to kthread_stop There are still a couple of cases where md threads (the resync/recovery thread) is not interruptible since the change to use kthreads. All places there it tests "signal_pending", it should also test kthread_should_stop, as with this patch. Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/md/md.c b/drivers/md/md.c index e947607..2a8a569 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3568,7 +3568,8 @@ static void md_do_sync(mddev_t *mddev) mddev->curr_resync = 2; try_again: - if (signal_pending(current)) { + if (signal_pending(current) || + kthread_should_stop()) { flush_signals(current); set_bit(MD_RECOVERY_INTR, &mddev->recovery); goto skip; @@ -3590,8 +3591,9 @@ static void md_do_sync(mddev_t *mddev) */ continue; prepare_to_wait(&resync_wait, &wq, TASK_INTERRUPTIBLE); - if (!signal_pending(current) - && mddev2->curr_resync >= mddev->curr_resync) { + if (!signal_pending(current) && + !kthread_should_stop() && + mddev2->curr_resync >= mddev->curr_resync) { printk(KERN_INFO "md: delaying resync of %s" " until %s has finished resync (they" " share one or more physical units)\n", @@ -3697,7 +3699,7 @@ static void md_do_sync(mddev_t *mddev) } - if (signal_pending(current)) { + if (signal_pending(current) || kthread_should_stop()) { /* * got a signal, exit. */ -- cgit v0.10.2 From 1c6fe9465941df04a1ad8f009bd6d95b20072a58 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 26 Oct 2005 01:58:59 -0700 Subject: [PATCH] NUMA: broken per cpu pageset counters The NUMA counters in struct per_cpu_pageset (linux/mmzone.h) are never cleared today. This works ok for CPU 0 on NUMA machines because boot_pageset[] is already zero, but for other CPU:s this results in uninitialized counters. Signed-off-by: Magnus Damm Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/page_alloc.c b/mm/page_alloc.c index cc1fe26..e1d3d77 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -1750,6 +1750,8 @@ inline void setup_pageset(struct per_cpu_pageset *p, unsigned long batch) { struct per_cpu_pages *pcp; + memset(p, 0, sizeof(*p)); + pcp = &p->pcp[0]; /* hot */ pcp->count = 0; pcp->low = 2 * batch; -- cgit v0.10.2 From 958d24df82e021704437da0789c47fcf581e4b85 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 26 Oct 2005 01:59:00 -0700 Subject: [PATCH] ppc64: Fix wrong register mapping in mpic driver The mpic interrupt controller driver (used on G5 and early pSeries among others) has a bug where it doesn't get the right virtual address for the timer registers. It causes the driver to poke at the MMIO space of whatever has been mapped just next to it (ouch !) when initializing and causes boot failures on some IBM machines. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/ppc64/kernel/mpic.c b/arch/ppc64/kernel/mpic.c index cc262a0..5f5bc73 100644 --- a/arch/ppc64/kernel/mpic.c +++ b/arch/ppc64/kernel/mpic.c @@ -506,8 +506,8 @@ struct mpic * __init mpic_alloc(unsigned long phys_addr, mpic->senses_count = senses_count; /* Map the global registers */ - mpic->gregs = ioremap(phys_addr + MPIC_GREG_BASE, 0x1000); - mpic->tmregs = mpic->gregs + (MPIC_TIMER_BASE >> 2); + mpic->gregs = ioremap(phys_addr + MPIC_GREG_BASE, 0x2000); + mpic->tmregs = mpic->gregs + ((MPIC_TIMER_BASE - MPIC_GREG_BASE) >> 2); BUG_ON(mpic->gregs == NULL); /* Reset */ -- cgit v0.10.2 From bb32051532fed727de0d513a9a578b54c0b7ea5a Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 26 Oct 2005 01:59:01 -0700 Subject: [PATCH] export cpu_online_map With CONFIG_SMP=n: *** Warning: "cpu_online_map" [drivers/firmware/dcdbas.ko] undefined! due to set_cpus_allowed(). Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/sched.c b/kernel/sched.c index 1f31a52..1e5cafd 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -3879,6 +3879,7 @@ EXPORT_SYMBOL(cpu_present_map); #ifndef CONFIG_SMP cpumask_t cpu_online_map = CPU_MASK_ALL; +EXPORT_SYMBOL_GPL(cpu_online_map); cpumask_t cpu_possible_map = CPU_MASK_ALL; #endif -- cgit v0.10.2 From 35848e048f55368f132e28e7f3278ce2d2347f6c Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 26 Oct 2005 01:59:01 -0700 Subject: [PATCH] kill massive wireless-related log spam Although this message is having the intended effect of causing wireless driver maintainers to upgrade their code, I never should have merged this patch in its present form. Leading to tons of bug reports and unhappy users. Some wireless apps poll for statistics regularly, which leads to a printk() every single time they ask for stats. That's a little bit _too_ much of a reminder that the driver is using an old API. Change this to printing out the message once, per kernel boot. Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/net/core/wireless.c b/net/core/wireless.c index d17f158..271ddb3 100644 --- a/net/core/wireless.c +++ b/net/core/wireless.c @@ -455,10 +455,15 @@ static inline struct iw_statistics *get_wireless_stats(struct net_device *dev) /* Old location, field to be removed in next WE */ if(dev->get_wireless_stats) { - printk(KERN_DEBUG "%s (WE) : Driver using old /proc/net/wireless support, please fix driver !\n", - dev->name); + static int printed_message; + + if (!printed_message++) + printk(KERN_DEBUG "%s (WE) : Driver using old /proc/net/wireless support, please fix driver !\n", + dev->name); + return dev->get_wireless_stats(dev); } + /* Not found */ return (struct iw_statistics *) NULL; } -- cgit v0.10.2 From 94c1d3184523efa7109472eb393cee6e954c5d75 Mon Sep 17 00:00:00 2001 From: Peter Wainwright Date: Wed, 26 Oct 2005 01:59:02 -0700 Subject: [PATCH] Fix HFS+ to free up the space when a file is deleted. fsck_hfs reveals lots of temporary files accumulating in the hidden directory "\000\000\000HFS+ Private Data". According to the HFS+ documentation these are files which are unlinked while in use. However, there may be a bug in the Linux hfsplus implementation which causes this to happen even when the files are not in use. It looks like the "opencnt" field is never initialized as (I think) it should be in hfsplus_read_inode. This means that a file can appear to be still in use when in fact it has been closed. This patch seems to fix it for me. Signed-off-by: Anton Altaparmakov Cc: Roman Zippel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/hfsplus/super.c b/fs/hfsplus/super.c index fd0f0f0..452fc1f 100644 --- a/fs/hfsplus/super.c +++ b/fs/hfsplus/super.c @@ -50,6 +50,7 @@ static void hfsplus_read_inode(struct inode *inode) init_MUTEX(&HFSPLUS_I(inode).extents_lock); HFSPLUS_I(inode).flags = 0; HFSPLUS_I(inode).rsrc_inode = NULL; + atomic_set(&HFSPLUS_I(inode).opencnt, 0); if (inode->i_ino >= HFSPLUS_FIRSTUSER_CNID) { read_inode: -- cgit v0.10.2 From 4bcde03d41d2264edb4ea3c47cb27da1e2609e48 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 26 Oct 2005 01:59:03 -0700 Subject: [PATCH] svcsock timestamp fix Convert nanoseconds to microseconds correctly. Spotted by Steve Dickson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c index 30ec3ef..691dea4 100644 --- a/net/sunrpc/svcsock.c +++ b/net/sunrpc/svcsock.c @@ -587,7 +587,7 @@ svc_udp_recvfrom(struct svc_rqst *rqstp) struct timeval tv; tv.tv_sec = xtime.tv_sec; - tv.tv_usec = xtime.tv_nsec * 1000; + tv.tv_usec = xtime.tv_nsec / NSEC_PER_USEC; skb_set_timestamp(skb, &tv); /* Don't enable netstamp, sunrpc doesn't need that much accuracy */ -- cgit v0.10.2 From b0917bd912d3708c50e1df1b5e1648d0547108a3 Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Wed, 26 Oct 2005 11:05:25 +0100 Subject: [PATCH] fix radeon_cp_init_ring_buffer() I've seen similar failure on alpha. Obviously, someone forgot to convert sg->handle stuff for PCI gart case. Signed-off-by: Dave Airlie Signed-off-by: Linus Torvalds diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 6d9080a..12ef13f 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -1133,10 +1133,10 @@ static void radeon_cp_init_ring_buffer( drm_device_t *dev, ring_start = (dev_priv->cp_ring->offset - dev->agp->base + dev_priv->gart_vm_start); - } else + } else #endif ring_start = (dev_priv->cp_ring->offset - - dev->sg->handle + - (unsigned long)dev->sg->virtual + dev_priv->gart_vm_start); RADEON_WRITE( RADEON_CP_RB_BASE, ring_start ); @@ -1164,7 +1164,8 @@ static void radeon_cp_init_ring_buffer( drm_device_t *dev, drm_sg_mem_t *entry = dev->sg; unsigned long tmp_ofs, page_ofs; - tmp_ofs = dev_priv->ring_rptr->offset - dev->sg->handle; + tmp_ofs = dev_priv->ring_rptr->offset - + (unsigned long)dev->sg->virtual; page_ofs = tmp_ofs >> PAGE_SHIFT; RADEON_WRITE( RADEON_CP_RB_RPTR_ADDR, @@ -1491,8 +1492,8 @@ static int radeon_do_init_cp( drm_device_t *dev, drm_radeon_init_t *init ) else #endif dev_priv->gart_buffers_offset = (dev->agp_buffer_map->offset - - dev->sg->handle - + dev_priv->gart_vm_start); + - (unsigned long)dev->sg->virtual + + dev_priv->gart_vm_start); DRM_DEBUG( "dev_priv->gart_size %d\n", dev_priv->gart_size ); -- cgit v0.10.2 From 70ab81c2ed3d1323e7d6805bf59cbb570dff7937 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 26 Oct 2005 11:23:06 -0700 Subject: posix cpu timers: fix timer ordering Pointed out by Oleg Nesterov, who has been walking over the code forwards and backwards. Signed-off-by: Linus Torvalds diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c index b15462b..2f86424 100644 --- a/kernel/posix-cpu-timers.c +++ b/kernel/posix-cpu-timers.c @@ -576,17 +576,15 @@ static void arm_timer(struct k_itimer *timer, union cpu_time_count now) listpos = head; if (CPUCLOCK_WHICH(timer->it_clock) == CPUCLOCK_SCHED) { list_for_each_entry(next, head, entry) { - if (next->expires.sched > nt->expires.sched) { - listpos = &next->entry; + if (next->expires.sched > nt->expires.sched) break; - } + listpos = &next->entry; } } else { list_for_each_entry(next, head, entry) { - if (cputime_gt(next->expires.cpu, nt->expires.cpu)) { - listpos = &next->entry; + if (cputime_gt(next->expires.cpu, nt->expires.cpu)) break; - } + listpos = &next->entry; } } list_add(&nt->entry, listpos); -- cgit v0.10.2 From 7a4ed937aa44acdeb8c6ba671509dc7b54b09d3a Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Wed, 26 Oct 2005 20:26:53 +0400 Subject: [PATCH] Fix cpu timers expiration time There's a silly off-by-one error in the code that updates the expiration of posix CPU timers, causing them to not be properly updated when they hit exactly on their expiration time (which should be the normal case). This causes them to then fire immediately again, and only _then_ get properly updated. Signed-off-by: Linus Torvalds diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c index 2f86424..383ba22 100644 --- a/kernel/posix-cpu-timers.c +++ b/kernel/posix-cpu-timers.c @@ -91,7 +91,7 @@ static inline union cpu_time_count cpu_time_sub(clockid_t which_clock, * Update expiry time from increment, and increase overrun count, * given the current clock sample. */ -static inline void bump_cpu_timer(struct k_itimer *timer, +static void bump_cpu_timer(struct k_itimer *timer, union cpu_time_count now) { int i; @@ -110,7 +110,7 @@ static inline void bump_cpu_timer(struct k_itimer *timer, for (i = 0; incr < delta - incr; i++) incr = incr << 1; for (; i >= 0; incr >>= 1, i--) { - if (delta <= incr) + if (delta < incr) continue; timer->it.cpu.expires.sched += incr; timer->it_overrun += 1 << i; @@ -128,7 +128,7 @@ static inline void bump_cpu_timer(struct k_itimer *timer, for (i = 0; cputime_lt(incr, cputime_sub(delta, incr)); i++) incr = cputime_add(incr, incr); for (; i >= 0; incr = cputime_halve(incr), i--) { - if (cputime_le(delta, incr)) + if (cputime_lt(delta, incr)) continue; timer->it.cpu.expires.cpu = cputime_add(timer->it.cpu.expires.cpu, incr); -- cgit v0.10.2 From a362f463a6d316d14daed0f817e151835ce97ff7 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 27 Oct 2005 09:07:33 -0700 Subject: Revert "remove false BUG_ON() from run_posix_cpu_timers()" This reverts commit 3de463c7d9d58f8cf3395268230cb20a4c15bffa. Roland has another patch that allows us to leave the BUG_ON() in place by just making sure that the condition it tests for really is always true. That goes in next. Signed-off-by: Linus Torvalds diff --git a/kernel/exit.c b/kernel/exit.c index 4897977..3b25b18 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -825,6 +825,14 @@ fastcall NORET_TYPE void do_exit(long code) tsk->flags |= PF_EXITING; + /* + * Make sure we don't try to process any timer firings + * while we are already exiting. + */ + tsk->it_virt_expires = cputime_zero; + tsk->it_prof_expires = cputime_zero; + tsk->it_sched_expires = 0; + if (unlikely(in_atomic())) printk(KERN_INFO "note: %s[%d] exited with preempt_count %d\n", current->comm, current->pid, diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c index 383ba22..ea1aca5 100644 --- a/kernel/posix-cpu-timers.c +++ b/kernel/posix-cpu-timers.c @@ -1293,30 +1293,30 @@ void run_posix_cpu_timers(struct task_struct *tsk) #undef UNEXPIRED + BUG_ON(tsk->exit_state); + /* * Double-check with locks held. */ read_lock(&tasklist_lock); - if (likely(tsk->signal != NULL)) { - spin_lock(&tsk->sighand->siglock); + spin_lock(&tsk->sighand->siglock); - /* - * Here we take off tsk->cpu_timers[N] and tsk->signal->cpu_timers[N] - * all the timers that are firing, and put them on the firing list. - */ - check_thread_timers(tsk, &firing); - check_process_timers(tsk, &firing); + /* + * Here we take off tsk->cpu_timers[N] and tsk->signal->cpu_timers[N] + * all the timers that are firing, and put them on the firing list. + */ + check_thread_timers(tsk, &firing); + check_process_timers(tsk, &firing); - /* - * We must release these locks before taking any timer's lock. - * There is a potential race with timer deletion here, as the - * siglock now protects our private firing list. We have set - * the firing flag in each timer, so that a deletion attempt - * that gets the timer lock before we do will give it up and - * spin until we've taken care of that timer below. - */ - spin_unlock(&tsk->sighand->siglock); - } + /* + * We must release these locks before taking any timer's lock. + * There is a potential race with timer deletion here, as the + * siglock now protects our private firing list. We have set + * the firing flag in each timer, so that a deletion attempt + * that gets the timer lock before we do will give it up and + * spin until we've taken care of that timer below. + */ + spin_unlock(&tsk->sighand->siglock); read_unlock(&tasklist_lock); /* -- cgit v0.10.2 From 72ab373a5688a78cbdaf3bf96012e597d5399bb7 Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Thu, 27 Oct 2005 03:16:42 -0700 Subject: [PATCH] Yet more posix-cpu-timer fixes This just makes sure that a thread's expiry times can't get reset after it clears them in do_exit. This is what allowed us to re-introduce the stricter BUG_ON() check in a362f463a6d316d14daed0f817e151835ce97ff7. Signed-off-by: Linus Torvalds diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c index ea1aca5..bf374fc 100644 --- a/kernel/posix-cpu-timers.c +++ b/kernel/posix-cpu-timers.c @@ -497,7 +497,7 @@ static void process_timer_rebalance(struct task_struct *p, left = cputime_div(cputime_sub(expires.cpu, val.cpu), nthreads); do { - if (!unlikely(t->exit_state)) { + if (!unlikely(t->flags & PF_EXITING)) { ticks = cputime_add(prof_ticks(t), left); if (cputime_eq(t->it_prof_expires, cputime_zero) || @@ -512,7 +512,7 @@ static void process_timer_rebalance(struct task_struct *p, left = cputime_div(cputime_sub(expires.cpu, val.cpu), nthreads); do { - if (!unlikely(t->exit_state)) { + if (!unlikely(t->flags & PF_EXITING)) { ticks = cputime_add(virt_ticks(t), left); if (cputime_eq(t->it_virt_expires, cputime_zero) || @@ -527,7 +527,7 @@ static void process_timer_rebalance(struct task_struct *p, nsleft = expires.sched - val.sched; do_div(nsleft, nthreads); do { - if (!unlikely(t->exit_state)) { + if (!unlikely(t->flags & PF_EXITING)) { ns = t->sched_time + nsleft; if (t->it_sched_expires == 0 || t->it_sched_expires > ns) { @@ -566,6 +566,9 @@ static void arm_timer(struct k_itimer *timer, union cpu_time_count now) struct cpu_timer_list *next; unsigned long i; + if (CPUCLOCK_PERTHREAD(timer->it_clock) && (p->flags & PF_EXITING)) + return; + head = (CPUCLOCK_PERTHREAD(timer->it_clock) ? p->cpu_timers : p->signal->cpu_timers); head += CPUCLOCK_WHICH(timer->it_clock); @@ -1204,7 +1207,7 @@ static void check_process_timers(struct task_struct *tsk, do { t = next_thread(t); - } while (unlikely(t->exit_state)); + } while (unlikely(t->flags & PF_EXITING)); } while (t != tsk); } } -- cgit v0.10.2 From 2ad41065d9fe518759b695fc2640cf9c07261dd2 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Thu, 27 Oct 2005 18:47:46 +1000 Subject: [TCP]: Clear stale pred_flags when snd_wnd changes This bug is responsible for causing the infamous "Treason uncloaked" messages that's been popping up everywhere since the printk was added. It has usually been blamed on foreign operating systems. However, some of those reports implicate Linux as both systems are running Linux or the TCP connection is going across the loopback interface. In fact, there really is a bug in the Linux TCP header prediction code that's been there since at least 2.1.8. This bug was tracked down with help from Dale Blount. The effect of this bug ranges from harmless "Treason uncloaked" messages to hung/aborted TCP connections. The details of the bug and fix is as follows. When snd_wnd is updated, we only update pred_flags if tcp_fast_path_check succeeds. When it fails (for example, when our rcvbuf is used up), we will leave pred_flags with an out-of-date snd_wnd value. When the out-of-date pred_flags happens to match the next incoming packet we will again hit the fast path and use the current snd_wnd which will be wrong. In the case of the treason messages, it just happens that the snd_wnd cached in pred_flags is zero while tp->snd_wnd is non-zero. Therefore when a zero-window packet comes in we incorrectly conclude that the window is non-zero. In fact if the peer continues to send us zero-window pure ACKs we will continue making the same mistake. It's only when the peer transmits a zero-window packet with data attached that we get a chance to snap out of it. This is what triggers the treason message at the next retransmit timeout. Signed-off-by: Herbert Xu Signed-off-by: Arnaldo Carvalho de Melo diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 677419d..3e98b57 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -2239,6 +2239,7 @@ static int tcp_ack_update_window(struct sock *sk, struct tcp_sock *tp, /* Note, it is the only place, where * fast path is recovered for sending TCP. */ + tp->pred_flags = 0; tcp_fast_path_check(sk, tp); if (nwin > tp->max_window) { -- cgit v0.10.2 From 79b95a454bb5c1d9b7287d1016a70885ba3f346c Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 27 Oct 2005 16:28:39 -0700 Subject: Revert "x86-64: Avoid unnecessary double bouncing for swiotlb" Commit id 6142891a0c0209c91aa4a98f725de0d6e2ed4918 Andi Kleen reports that it seems to break things for some people, and since it's purely a small optimization, revert it for now. Signed-off-by: Linus Torvalds diff --git a/include/asm-x86_64/pci.h b/include/asm-x86_64/pci.h index 5a82a67..eeb3088 100644 --- a/include/asm-x86_64/pci.h +++ b/include/asm-x86_64/pci.h @@ -50,10 +50,10 @@ extern int iommu_setup(char *opt); * address space. The networking and block device layers use * this boolean for bounce buffer decisions * - * On x86-64 it mostly equals, but we set it to zero to tell some subsystems - * that an hard or soft IOMMU is available. + * On AMD64 it mostly equals, but we set it to zero to tell some subsystems + * that an IOMMU is available. */ -#define PCI_DMA_BUS_IS_PHYS 0 +#define PCI_DMA_BUS_IS_PHYS (no_iommu ? 1 : 0) /* * x86-64 always supports DAC, but sometimes it is useful to force -- cgit v0.10.2 From 927321440976d0781a252eefe686ae6b0f236ae2 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Thu, 27 Oct 2005 16:16:25 -0700 Subject: [PATCH] cpufreq: SMP fix for conservative governor Don't try to access not-present CPUs. Conservative governor will always oops on SMP without this fix. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=4781 Signed-off-by: Venkatesh Pallipadi Signed-off-by: Dave Jones Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c index e1df376..2ed5c43 100644 --- a/drivers/cpufreq/cpufreq_conservative.c +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -315,9 +315,9 @@ static void dbs_check_cpu(int cpu) policy = this_dbs_info->cur_policy; if ( init_flag == 0 ) { - for ( /* NULL */; init_flag < NR_CPUS; init_flag++ ) { - dbs_info = &per_cpu(cpu_dbs_info, init_flag); - requested_freq[cpu] = dbs_info->cur_policy->cur; + for_each_online_cpu(j) { + dbs_info = &per_cpu(cpu_dbs_info, j); + requested_freq[j] = dbs_info->cur_policy->cur; } init_flag = 1; } -- cgit v0.10.2 From 741b2252a5e14d6c60a913c77a6099abe73a854a Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 27 Oct 2005 17:02:08 -0700 Subject: Linux v2.6.14 "Better late than never" diff --git a/Makefile b/Makefile index 4a7000e..1fa7e53 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 14 -EXTRAVERSION =-rc5 +EXTRAVERSION = NAME=Affluent Albatross # *DOCUMENTATION* -- cgit v0.10.2