From a0800f6da7c4590d49ae513d9d5ee8b1ad203b82 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Thu, 29 Sep 2005 16:21:50 +0200 Subject: [WATCHDOG] pcwd_pci.c control status + boot-code clean-up * Clean-up control status code (use control status defines + change pcipcwd_clear_status) * Clean-up boot-code (move card info to pcipcwd_show_card_info() ) Signed-off-by: Wim Van Sebroeck diff --git a/drivers/char/watchdog/pcwd_pci.c b/drivers/char/watchdog/pcwd_pci.c index 5a80adb..0cb62e3 100644 --- a/drivers/char/watchdog/pcwd_pci.c +++ b/drivers/char/watchdog/pcwd_pci.c @@ -50,8 +50,8 @@ #include /* For inb/outb/... */ /* Module and version information */ -#define WATCHDOG_VERSION "1.01" -#define WATCHDOG_DATE "02 Sep 2005" +#define WATCHDOG_VERSION "1.02" +#define WATCHDOG_DATE "03 Sep 2005" #define WATCHDOG_DRIVER_NAME "PCI-PC Watchdog" #define WATCHDOG_NAME "pcwd_pci" #define PFX WATCHDOG_NAME ": " @@ -70,19 +70,30 @@ * These are the defines that describe the control status bits for the * PCI-PC Watchdog card. */ -#define WD_PCI_WTRP 0x01 /* Watchdog Trip status */ -#define WD_PCI_HRBT 0x02 /* Watchdog Heartbeat */ -#define WD_PCI_TTRP 0x04 /* Temperature Trip status */ +/* Port 1 : Control Status #1 */ +#define WD_PCI_WTRP 0x01 /* Watchdog Trip status */ +#define WD_PCI_HRBT 0x02 /* Watchdog Heartbeat */ +#define WD_PCI_TTRP 0x04 /* Temperature Trip status */ +#define WD_PCI_RL2A 0x08 /* Relay 2 Active */ +#define WD_PCI_RL1A 0x10 /* Relay 1 Active */ +#define WD_PCI_R2DS 0x40 /* Relay 2 Disable Temperature-trip/reset */ +#define WD_PCI_RLY2 0x80 /* Activate Relay 2 on the board */ +/* Port 2 : Control Status #2 */ +#define WD_PCI_WDIS 0x10 /* Watchdog Disable */ +#define WD_PCI_ENTP 0x20 /* Enable Temperature Trip Reset */ +#define WD_PCI_WRSP 0x40 /* Watchdog wrote response */ +#define WD_PCI_PCMD 0x80 /* PC has sent command */ /* according to documentation max. time to process a command for the pci * watchdog card is 100 ms, so we give it 150 ms to do it's job */ #define PCI_COMMAND_TIMEOUT 150 /* Watchdog's internal commands */ -#define CMD_GET_STATUS 0x04 -#define CMD_GET_FIRMWARE_VERSION 0x08 -#define CMD_READ_WATCHDOG_TIMEOUT 0x18 -#define CMD_WRITE_WATCHDOG_TIMEOUT 0x19 +#define CMD_GET_STATUS 0x04 +#define CMD_GET_FIRMWARE_VERSION 0x08 +#define CMD_READ_WATCHDOG_TIMEOUT 0x18 +#define CMD_WRITE_WATCHDOG_TIMEOUT 0x19 +#define CMD_GET_CLEAR_RESET_COUNT 0x84 /* We can only use 1 card due to the /dev/watchdog restriction */ static int cards_found; @@ -91,12 +102,12 @@ static int cards_found; static int temp_panic; static unsigned long is_active; static char expect_release; -static struct { - int supports_temp; /* Wether or not the card has a temperature device */ - int boot_status; /* The card's boot status */ - unsigned long io_addr; /* The cards I/O address */ - spinlock_t io_lock; - struct pci_dev *pdev; +static struct { /* this is private data for each PCI-PC watchdog card */ + int supports_temp; /* Wether or not the card has a temperature device */ + int boot_status; /* The card's boot status */ + unsigned long io_addr; /* The cards I/O address */ + spinlock_t io_lock; /* the lock for io operations */ + struct pci_dev *pdev; /* the PCI-device */ } pcipcwd_private; /* module parameters */ @@ -131,10 +142,10 @@ static int send_command(int cmd, int *msb, int *lsb) /* wait till the pci card processed the command, signaled by * the WRSP bit in port 2 and give it a max. timeout of * PCI_COMMAND_TIMEOUT to process */ - got_response = inb_p(pcipcwd_private.io_addr + 2) & 0x40; + got_response = inb_p(pcipcwd_private.io_addr + 2) & WD_PCI_WRSP; for (count = 0; (count < PCI_COMMAND_TIMEOUT) && (!got_response); count++) { mdelay(1); - got_response = inb_p(pcipcwd_private.io_addr + 2) & 0x40; + got_response = inb_p(pcipcwd_private.io_addr + 2) & WD_PCI_WRSP; } if (got_response) { @@ -150,6 +161,55 @@ static int send_command(int cmd, int *msb, int *lsb) return got_response; } +static inline void pcipcwd_check_temperature_support(void) +{ + if (inb_p(pcipcwd_private.io_addr) != 0xF0) + pcipcwd_private.supports_temp = 1; +} + +static int pcipcwd_get_option_switches(void) +{ + int option_switches; + + option_switches = inb_p(pcipcwd_private.io_addr + 3); + return option_switches; +} + +static void pcipcwd_show_card_info(void) +{ + int got_fw_rev, fw_rev_major, fw_rev_minor; + char fw_ver_str[20]; /* The cards firmware version */ + int option_switches; + + got_fw_rev = send_command(CMD_GET_FIRMWARE_VERSION, &fw_rev_major, &fw_rev_minor); + if (got_fw_rev) { + sprintf(fw_ver_str, "%u.%02u", fw_rev_major, fw_rev_minor); + } else { + sprintf(fw_ver_str, ""); + } + + /* Get switch settings */ + option_switches = pcipcwd_get_option_switches(); + + printk(KERN_INFO PFX "Found card at port 0x%04x (Firmware: %s) %s temp option\n", + (int) pcipcwd_private.io_addr, fw_ver_str, + (pcipcwd_private.supports_temp ? "with" : "without")); + + printk(KERN_INFO PFX "Option switches (0x%02x): Temperature Reset Enable=%s, Power On Delay=%s\n", + option_switches, + ((option_switches & 0x10) ? "ON" : "OFF"), + ((option_switches & 0x08) ? "ON" : "OFF")); + + if (pcipcwd_private.boot_status & WDIOF_CARDRESET) + printk(KERN_INFO PFX "Previous reset was caused by the Watchdog card\n"); + + if (pcipcwd_private.boot_status & WDIOF_OVERHEAT) + printk(KERN_INFO PFX "Card sensed a CPU Overheat\n"); + + if (pcipcwd_private.boot_status == 0) + printk(KERN_INFO PFX "No previous trip detected - Cold boot or reset\n"); +} + static int pcipcwd_start(void) { int stat_reg; @@ -161,7 +221,7 @@ static int pcipcwd_start(void) stat_reg = inb_p(pcipcwd_private.io_addr + 2); spin_unlock(&pcipcwd_private.io_lock); - if (stat_reg & 0x10) { + if (stat_reg & WD_PCI_WDIS) { printk(KERN_ERR PFX "Card timer not enabled\n"); return -1; } @@ -183,7 +243,7 @@ static int pcipcwd_stop(void) stat_reg = inb_p(pcipcwd_private.io_addr + 2); spin_unlock(&pcipcwd_private.io_lock); - if (!(stat_reg & 0x10)) { + if (!(stat_reg & WD_PCI_WDIS)) { printk(KERN_ERR PFX "Card did not acknowledge disable attempt\n"); return -1; } @@ -194,7 +254,7 @@ static int pcipcwd_stop(void) static int pcipcwd_keepalive(void) { /* Re-trigger watchdog by writing to port 0 */ - outb_p(0x42, pcipcwd_private.io_addr); + outb_p(0x42, pcipcwd_private.io_addr); /* send out any data */ return 0; } @@ -215,13 +275,13 @@ static int pcipcwd_set_heartbeat(int t) static int pcipcwd_get_status(int *status) { - int new_status; + int control_status; *status=0; - new_status = inb_p(pcipcwd_private.io_addr + 1); - if (new_status & WD_PCI_WTRP) + control_status = inb_p(pcipcwd_private.io_addr + 1); + if (control_status & WD_PCI_WTRP) *status |= WDIOF_CARDRESET; - if (new_status & WD_PCI_TTRP) { + if (control_status & WD_PCI_TTRP) { *status |= WDIOF_OVERHEAT; if (temp_panic) panic(PFX "Temperature overheat trip!\n"); @@ -232,7 +292,20 @@ static int pcipcwd_get_status(int *status) static int pcipcwd_clear_status(void) { - outb_p(0x01, pcipcwd_private.io_addr + 1); + int control_status; + int msb; + int reset_counter; + + control_status = inb_p(pcipcwd_private.io_addr + 1); + + /* clear trip status & LED and keep mode of relay 2 */ + outb_p((control_status & WD_PCI_R2DS) | WD_PCI_WTRP, pcipcwd_private.io_addr + 1); + + /* clear reset counter */ + msb=0; + reset_counter=0xff; + send_command(CMD_GET_CLEAR_RESET_COUNT, &msb, &reset_counter); + return 0; } @@ -242,11 +315,13 @@ static int pcipcwd_get_temperature(int *temperature) if (!pcipcwd_private.supports_temp) return -ENODEV; + *temperature = inb_p(pcipcwd_private.io_addr); + /* * Convert celsius to fahrenheit, since this was * the decided 'standard' for this return value. */ - *temperature = ((inb_p(pcipcwd_private.io_addr)) * 9 / 5) + 32; + *temperature = (*temperature * 9 / 5) + 32; return 0; } @@ -256,7 +331,7 @@ static int pcipcwd_get_temperature(int *temperature) */ static ssize_t pcipcwd_write(struct file *file, const char __user *data, - size_t len, loff_t *ppos) + size_t len, loff_t *ppos) { /* See if we got the magic character 'V' and reload the timer */ if (len) { @@ -381,8 +456,9 @@ static int pcipcwd_ioctl(struct inode *inode, struct file *file, static int pcipcwd_open(struct inode *inode, struct file *file) { /* /dev/watchdog can only be opened once */ - if (test_and_set_bit(0, &is_active)) + if (test_and_set_bit(0, &is_active)) { return -EBUSY; + } /* Activate */ pcipcwd_start(); @@ -492,19 +568,10 @@ static struct notifier_block pcipcwd_notifier = { * Init & exit routines */ -static inline void check_temperature_support(void) -{ - if (inb_p(pcipcwd_private.io_addr) != 0xF0) - pcipcwd_private.supports_temp = 1; -} - static int __devinit pcipcwd_card_init(struct pci_dev *pdev, const struct pci_device_id *ent) { int ret = -EIO; - int got_fw_rev, fw_rev_major, fw_rev_minor; - char fw_ver_str[20]; - char option_switches; cards_found++; if (cards_found == 1) @@ -546,36 +613,10 @@ static int __devinit pcipcwd_card_init(struct pci_dev *pdev, pcipcwd_stop(); /* Check whether or not the card supports the temperature device */ - check_temperature_support(); - - /* Get the Firmware Version */ - got_fw_rev = send_command(CMD_GET_FIRMWARE_VERSION, &fw_rev_major, &fw_rev_minor); - if (got_fw_rev) { - sprintf(fw_ver_str, "%u.%02u", fw_rev_major, fw_rev_minor); - } else { - sprintf(fw_ver_str, ""); - } + pcipcwd_check_temperature_support(); - /* Get switch settings */ - option_switches = inb_p(pcipcwd_private.io_addr + 3); - - printk(KERN_INFO PFX "Found card at port 0x%04x (Firmware: %s) %s temp option\n", - (int) pcipcwd_private.io_addr, fw_ver_str, - (pcipcwd_private.supports_temp ? "with" : "without")); - - printk(KERN_INFO PFX "Option switches (0x%02x): Temperature Reset Enable=%s, Power On Delay=%s\n", - option_switches, - ((option_switches & 0x10) ? "ON" : "OFF"), - ((option_switches & 0x08) ? "ON" : "OFF")); - - if (pcipcwd_private.boot_status & WDIOF_CARDRESET) - printk(KERN_INFO PFX "Previous reset was caused by the Watchdog card\n"); - - if (pcipcwd_private.boot_status & WDIOF_OVERHEAT) - printk(KERN_INFO PFX "Card sensed a CPU Overheat\n"); - - if (pcipcwd_private.boot_status == 0) - printk(KERN_INFO PFX "No previous trip detected - Cold boot or reset\n"); + /* Show info about the card itself */ + pcipcwd_show_card_info(); /* Check that the heartbeat value is within it's range ; if not reset to the default */ if (pcipcwd_set_heartbeat(heartbeat)) { @@ -656,7 +697,7 @@ static struct pci_driver pcipcwd_driver = { static int __init pcipcwd_init_module(void) { - spin_lock_init (&pcipcwd_private.io_lock); + spin_lock_init(&pcipcwd_private.io_lock); return pci_register_driver(&pcipcwd_driver); } -- cgit v0.10.2 From 195331d7c9813fe7f1a93c09afa2c7dcdf2790a8 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Thu, 29 Sep 2005 16:22:30 +0200 Subject: [WATCHDOG] pcwd_pci.c add debug module_param Add debugging code for the pcwd_pci driver. Signed-off-by: Wim Van Sebroeck diff --git a/drivers/char/watchdog/pcwd_pci.c b/drivers/char/watchdog/pcwd_pci.c index 0cb62e3..0b8e493 100644 --- a/drivers/char/watchdog/pcwd_pci.c +++ b/drivers/char/watchdog/pcwd_pci.c @@ -111,6 +111,13 @@ static struct { /* this is private data for each PCI-PC watchdog card */ } pcipcwd_private; /* module parameters */ +#define QUIET 0 /* Default */ +#define VERBOSE 1 /* Verbose */ +#define DEBUG 2 /* print fancy stuff too */ +static int debug = QUIET; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level: 0=Quiet, 1=Verbose, 2=Debug (default=0)"); + #define WATCHDOG_HEARTBEAT 2 /* 2 sec default heartbeat */ static int heartbeat = WATCHDOG_HEARTBEAT; module_param(heartbeat, int, 0); @@ -128,6 +135,10 @@ static int send_command(int cmd, int *msb, int *lsb) { int got_response, count; + if (debug >= DEBUG) + printk(KERN_DEBUG PFX "sending following data cmd=0x%02x msb=0x%02x lsb=0x%02x\n", + cmd, *msb, *lsb); + spin_lock(&pcipcwd_private.io_lock); /* If a command requires data it should be written first. * Data for commands with 8 bits of data should be written to port 4. @@ -148,6 +159,15 @@ static int send_command(int cmd, int *msb, int *lsb) got_response = inb_p(pcipcwd_private.io_addr + 2) & WD_PCI_WRSP; } + if (debug >= DEBUG) { + if (got_response) { + printk(KERN_DEBUG PFX "time to process command was: %d ms\n", + count); + } else { + printk(KERN_DEBUG PFX "card did not respond on command!\n"); + } + } + if (got_response) { /* read back response */ *lsb = inb_p(pcipcwd_private.io_addr + 4); @@ -155,7 +175,12 @@ static int send_command(int cmd, int *msb, int *lsb) /* clear WRSP bit */ inb_p(pcipcwd_private.io_addr + 6); + + if (debug >= DEBUG) + printk(KERN_DEBUG PFX "received following data for cmd=0x%02x: msb=0x%02x lsb=0x%02x\n", + cmd, *msb, *lsb); } + spin_unlock(&pcipcwd_private.io_lock); return got_response; @@ -226,6 +251,9 @@ static int pcipcwd_start(void) return -1; } + if (debug >= VERBOSE) + printk(KERN_DEBUG PFX "Watchdog started\n"); + return 0; } @@ -248,6 +276,9 @@ static int pcipcwd_stop(void) return -1; } + if (debug >= VERBOSE) + printk(KERN_DEBUG PFX "Watchdog stopped\n"); + return 0; } @@ -255,6 +286,10 @@ static int pcipcwd_keepalive(void) { /* Re-trigger watchdog by writing to port 0 */ outb_p(0x42, pcipcwd_private.io_addr); /* send out any data */ + + if (debug >= DEBUG) + printk(KERN_DEBUG PFX "Watchdog keepalive signal send\n"); + return 0; } @@ -270,6 +305,10 @@ static int pcipcwd_set_heartbeat(int t) send_command(CMD_WRITE_WATCHDOG_TIMEOUT, &t_msb, &t_lsb); heartbeat = t; + if (debug >= VERBOSE) + printk(KERN_DEBUG PFX "New heartbeat: %d\n", + heartbeat); + return 0; } @@ -287,6 +326,10 @@ static int pcipcwd_get_status(int *status) panic(PFX "Temperature overheat trip!\n"); } + if (debug >= DEBUG) + printk(KERN_DEBUG PFX "Control Status #1: 0x%02x\n", + control_status); + return 0; } @@ -296,8 +339,17 @@ static int pcipcwd_clear_status(void) int msb; int reset_counter; + if (debug >= VERBOSE) + printk(KERN_INFO PFX "clearing watchdog trip status & LED\n"); + control_status = inb_p(pcipcwd_private.io_addr + 1); + if (debug >= DEBUG) { + printk(KERN_DEBUG PFX "status was: 0x%02x\n", control_status); + printk(KERN_DEBUG PFX "sending: 0x%02x\n", + (control_status & WD_PCI_R2DS) | WD_PCI_WTRP); + } + /* clear trip status & LED and keep mode of relay 2 */ outb_p((control_status & WD_PCI_R2DS) | WD_PCI_WTRP, pcipcwd_private.io_addr + 1); @@ -306,6 +358,11 @@ static int pcipcwd_clear_status(void) reset_counter=0xff; send_command(CMD_GET_CLEAR_RESET_COUNT, &msb, &reset_counter); + if (debug >= DEBUG) { + printk(KERN_DEBUG PFX "reset count was: 0x%02x\n", + reset_counter); + } + return 0; } @@ -323,6 +380,11 @@ static int pcipcwd_get_temperature(int *temperature) */ *temperature = (*temperature * 9 / 5) + 32; + if (debug >= DEBUG) { + printk(KERN_DEBUG PFX "temperature is: %d F\n", + *temperature); + } + return 0; } @@ -457,6 +519,8 @@ static int pcipcwd_open(struct inode *inode, struct file *file) { /* /dev/watchdog can only be opened once */ if (test_and_set_bit(0, &is_active)) { + if (debug >= VERBOSE) + printk(KERN_ERR PFX "Attempt to open already opened device.\n"); return -EBUSY; } -- cgit v0.10.2 From 96f339c6b95344942fe5fce012ff4f2a3b2cb80d Mon Sep 17 00:00:00 2001 From: Greg Edwards Date: Wed, 28 Sep 2005 17:05:19 -0500 Subject: [IA64] mbcs_init() should give up unless running on sn2 CONFIG_SGI_MBCS is enabled in generic kernels, but the driver may oops some other platforms. Check whether we are running on sn2 and bail out if we are not before doing anything dangerous. Acked-by: Bruce Losure Signed-off-by: Greg Edwards Signed-off-by: Tony Luck diff --git a/drivers/char/mbcs.c b/drivers/char/mbcs.c index 3fa64c6..c268ee0 100644 --- a/drivers/char/mbcs.c +++ b/drivers/char/mbcs.c @@ -830,6 +830,9 @@ static int __init mbcs_init(void) { int rv; + if (!ia64_platform_is("sn2")) + return -ENODEV; + // Put driver into chrdevs[]. Get major number. rv = register_chrdev(mbcs_major, DEVICE_NAME, &mbcs_ops); if (rv < 0) { -- cgit v0.10.2 From 2256c13b992b09f1f9563c26457aa048da2865df Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 6 Oct 2005 20:43:54 -0700 Subject: [SPARC64]: Probe for power device on ISA bus too. Signed-off-by: David S. Miller diff --git a/arch/sparc64/kernel/power.c b/arch/sparc64/kernel/power.c index 946cee0..9e8362e 100644 --- a/arch/sparc64/kernel/power.c +++ b/arch/sparc64/kernel/power.c @@ -17,6 +17,7 @@ #include #include +#include #include #include @@ -100,46 +101,83 @@ again: return 0; } -static int __init has_button_interrupt(struct linux_ebus_device *edev) +static int __init has_button_interrupt(unsigned int irq, int prom_node) { - if (edev->irqs[0] == PCI_IRQ_NONE) + if (irq == PCI_IRQ_NONE) return 0; - if (!prom_node_has_property(edev->prom_node, "button")) + if (!prom_node_has_property(prom_node, "button")) return 0; return 1; } -void __init power_init(void) +static int __init power_probe_ebus(struct resource **resp, unsigned int *irq_p, int *prom_node_p) { struct linux_ebus *ebus; struct linux_ebus_device *edev; + + for_each_ebus(ebus) { + for_each_ebusdev(edev, ebus) { + if (!strcmp(edev->prom_name, "power")) { + *resp = &edev->resource[0]; + *irq_p = edev->irqs[0]; + *prom_node_p = edev->prom_node; + return 0; + } + } + } + return -ENODEV; +} + +static int __init power_probe_isa(struct resource **resp, unsigned int *irq_p, int *prom_node_p) +{ + struct sparc_isa_bridge *isa_bus; + struct sparc_isa_device *isa_dev; + + for_each_isa(isa_bus) { + for_each_isadev(isa_dev, isa_bus) { + if (!strcmp(isa_dev->prom_name, "power")) { + *resp = &isa_dev->resource; + *irq_p = isa_dev->irq; + *prom_node_p = isa_dev->prom_node; + return 0; + } + } + } + return -ENODEV; +} + +void __init power_init(void) +{ + struct resource *res = NULL; + unsigned int irq; + int prom_node; static int invoked; if (invoked) return; invoked = 1; - for_each_ebus(ebus) { - for_each_ebusdev(edev, ebus) { - if (!strcmp(edev->prom_name, "power")) - goto found; - } - } + if (!power_probe_ebus(&res, &irq, &prom_node)) + goto found; + + if (!power_probe_isa(&res, &irq, &prom_node)) + goto found; + return; found: - power_reg = ioremap(edev->resource[0].start, 0x4); + power_reg = ioremap(res->start, 0x4); printk("power: Control reg at %p ... ", power_reg); poweroff_method = machine_halt; /* able to use the standard halt */ - if (has_button_interrupt(edev)) { + if (has_button_interrupt(irq, prom_node)) { if (kernel_thread(powerd, NULL, CLONE_FS) < 0) { printk("Failed to start power daemon.\n"); return; } printk("powerd running.\n"); - if (request_irq(edev->irqs[0], + if (request_irq(irq, power_handler, SA_SHIRQ, "power", NULL) < 0) printk("power: Error, cannot register IRQ handler.\n"); } else { -- cgit v0.10.2 From 5fe467ee9787007dd9b263eb42dde3742deb743b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ivan=20Skytte=20J=F8rgensen?= Date: Thu, 6 Oct 2005 21:36:17 -0700 Subject: [SCTP] Fix sctp_get{pl}addrs() API to work with 32-bit apps on 64-bit kernels. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The old socket options are marked with a _OLD suffix so that the existing 32-bit apps on 32-bit kernels do not break. Signed-off-by: Ivan Skytte Jørgensen Signed-off-by: Sridhar Samudrala Signed-off-by: David S. Miller diff --git a/include/net/sctp/user.h b/include/net/sctp/user.h index f6328ae..e81ab52 100644 --- a/include/net/sctp/user.h +++ b/include/net/sctp/user.h @@ -103,16 +103,20 @@ enum sctp_optname { #define SCTP_SOCKOPT_BINDX_REM SCTP_SOCKOPT_BINDX_REM SCTP_SOCKOPT_PEELOFF, /* peel off association. */ #define SCTP_SOCKOPT_PEELOFF SCTP_SOCKOPT_PEELOFF - SCTP_GET_PEER_ADDRS_NUM, /* Get number of peer addresss. */ -#define SCTP_GET_PEER_ADDRS_NUM SCTP_GET_PEER_ADDRS_NUM + SCTP_GET_PEER_ADDRS_NUM_OLD, /* Get number of peer addresss. */ +#define SCTP_GET_PEER_ADDRS_NUM_OLD SCTP_GET_PEER_ADDRS_NUM_OLD + SCTP_GET_PEER_ADDRS_OLD, /* Get all peer addresss. */ +#define SCTP_GET_PEER_ADDRS_OLD SCTP_GET_PEER_ADDRS_OLD + SCTP_GET_LOCAL_ADDRS_NUM_OLD, /* Get number of local addresss. */ +#define SCTP_GET_LOCAL_ADDRS_NUM_OLD SCTP_GET_LOCAL_ADDRS_NUM_OLD + SCTP_GET_LOCAL_ADDRS_OLD, /* Get all local addresss. */ +#define SCTP_GET_LOCAL_ADDRS_OLD SCTP_GET_LOCAL_ADDRS_OLD + SCTP_SOCKOPT_CONNECTX, /* CONNECTX requests. */ +#define SCTP_SOCKOPT_CONNECTX SCTP_SOCKOPT_CONNECTX SCTP_GET_PEER_ADDRS, /* Get all peer addresss. */ #define SCTP_GET_PEER_ADDRS SCTP_GET_PEER_ADDRS - SCTP_GET_LOCAL_ADDRS_NUM, /* Get number of local addresss. */ -#define SCTP_GET_LOCAL_ADDRS_NUM SCTP_GET_LOCAL_ADDRS_NUM SCTP_GET_LOCAL_ADDRS, /* Get all local addresss. */ #define SCTP_GET_LOCAL_ADDRS SCTP_GET_LOCAL_ADDRS - SCTP_SOCKOPT_CONNECTX, /* CONNECTX requests. */ -#define SCTP_SOCKOPT_CONNECTX SCTP_SOCKOPT_CONNECTX }; /* @@ -559,11 +563,16 @@ struct sctp_status { * SCTP_GET_LOCAL_ADDRS socket options used internally to implement * sctp_getpaddrs() and sctp_getladdrs() API. */ -struct sctp_getaddrs { +struct sctp_getaddrs_old { sctp_assoc_t assoc_id; int addr_num; struct sockaddr __user *addrs; }; +struct sctp_getaddrs { + sctp_assoc_t assoc_id; /*input*/ + __u32 addr_num; /*output*/ + __u8 addrs[0]; /*output, variable size*/ +}; /* These are bit fields for msghdr->msg_flags. See section 5.1. */ /* On user space Linux, these live in as an enum. */ diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 91ec8c9..02e068d 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -3159,8 +3159,9 @@ static int sctp_getsockopt_initmsg(struct sock *sk, int len, char __user *optval return 0; } -static int sctp_getsockopt_peer_addrs_num(struct sock *sk, int len, - char __user *optval, int __user *optlen) +static int sctp_getsockopt_peer_addrs_num_old(struct sock *sk, int len, + char __user *optval, + int __user *optlen) { sctp_assoc_t id; struct sctp_association *asoc; @@ -3185,23 +3186,28 @@ static int sctp_getsockopt_peer_addrs_num(struct sock *sk, int len, return cnt; } -static int sctp_getsockopt_peer_addrs(struct sock *sk, int len, - char __user *optval, int __user *optlen) +/* + * Old API for getting list of peer addresses. Does not work for 32-bit + * programs running on a 64-bit kernel + */ +static int sctp_getsockopt_peer_addrs_old(struct sock *sk, int len, + char __user *optval, + int __user *optlen) { struct sctp_association *asoc; struct list_head *pos; int cnt = 0; - struct sctp_getaddrs getaddrs; + struct sctp_getaddrs_old getaddrs; struct sctp_transport *from; void __user *to; union sctp_addr temp; struct sctp_sock *sp = sctp_sk(sk); int addrlen; - if (len != sizeof(struct sctp_getaddrs)) + if (len != sizeof(struct sctp_getaddrs_old)) return -EINVAL; - if (copy_from_user(&getaddrs, optval, sizeof(struct sctp_getaddrs))) + if (copy_from_user(&getaddrs, optval, sizeof(struct sctp_getaddrs_old))) return -EFAULT; if (getaddrs.addr_num <= 0) return -EINVAL; @@ -3225,15 +3231,69 @@ static int sctp_getsockopt_peer_addrs(struct sock *sk, int len, if (cnt >= getaddrs.addr_num) break; } getaddrs.addr_num = cnt; - if (copy_to_user(optval, &getaddrs, sizeof(struct sctp_getaddrs))) + if (copy_to_user(optval, &getaddrs, sizeof(struct sctp_getaddrs_old))) + return -EFAULT; + + return 0; +} + +static int sctp_getsockopt_peer_addrs(struct sock *sk, int len, + char __user *optval, int __user *optlen) +{ + struct sctp_association *asoc; + struct list_head *pos; + int cnt = 0; + struct sctp_getaddrs getaddrs; + struct sctp_transport *from; + void __user *to; + union sctp_addr temp; + struct sctp_sock *sp = sctp_sk(sk); + int addrlen; + size_t space_left; + int bytes_copied; + + if (len < sizeof(struct sctp_getaddrs)) + return -EINVAL; + + if (copy_from_user(&getaddrs, optval, sizeof(struct sctp_getaddrs))) + return -EFAULT; + + /* For UDP-style sockets, id specifies the association to query. */ + asoc = sctp_id2assoc(sk, getaddrs.assoc_id); + if (!asoc) + return -EINVAL; + + to = optval + offsetof(struct sctp_getaddrs,addrs); + space_left = len - sizeof(struct sctp_getaddrs) - + offsetof(struct sctp_getaddrs,addrs); + + list_for_each(pos, &asoc->peer.transport_addr_list) { + from = list_entry(pos, struct sctp_transport, transports); + memcpy(&temp, &from->ipaddr, sizeof(temp)); + sctp_get_pf_specific(sk->sk_family)->addr_v4map(sp, &temp); + addrlen = sctp_get_af_specific(sk->sk_family)->sockaddr_len; + if(space_left < addrlen) + return -ENOMEM; + temp.v4.sin_port = htons(temp.v4.sin_port); + if (copy_to_user(to, &temp, addrlen)) + return -EFAULT; + to += addrlen; + cnt++; + space_left -= addrlen; + } + + if (put_user(cnt, &((struct sctp_getaddrs __user *)optval)->addr_num)) + return -EFAULT; + bytes_copied = ((char __user *)to) - optval; + if (put_user(bytes_copied, optlen)) return -EFAULT; return 0; } -static int sctp_getsockopt_local_addrs_num(struct sock *sk, int len, - char __user *optval, - int __user *optlen) +static int sctp_getsockopt_local_addrs_num_old(struct sock *sk, int len, + char __user *optval, + int __user *optlen) { sctp_assoc_t id; struct sctp_bind_addr *bp; @@ -3306,8 +3366,8 @@ done: /* Helper function that copies local addresses to user and returns the number * of addresses copied. */ -static int sctp_copy_laddrs_to_user(struct sock *sk, __u16 port, int max_addrs, - void __user *to) +static int sctp_copy_laddrs_to_user_old(struct sock *sk, __u16 port, int max_addrs, + void __user *to) { struct list_head *pos; struct sctp_sockaddr_entry *addr; @@ -3341,14 +3401,54 @@ static int sctp_copy_laddrs_to_user(struct sock *sk, __u16 port, int max_addrs, return cnt; } -static int sctp_getsockopt_local_addrs(struct sock *sk, int len, - char __user *optval, int __user *optlen) +static int sctp_copy_laddrs_to_user(struct sock *sk, __u16 port, + void * __user *to, size_t space_left) +{ + struct list_head *pos; + struct sctp_sockaddr_entry *addr; + unsigned long flags; + union sctp_addr temp; + int cnt = 0; + int addrlen; + + sctp_spin_lock_irqsave(&sctp_local_addr_lock, flags); + list_for_each(pos, &sctp_local_addr_list) { + addr = list_entry(pos, struct sctp_sockaddr_entry, list); + if ((PF_INET == sk->sk_family) && + (AF_INET6 == addr->a.sa.sa_family)) + continue; + memcpy(&temp, &addr->a, sizeof(temp)); + sctp_get_pf_specific(sk->sk_family)->addr_v4map(sctp_sk(sk), + &temp); + addrlen = sctp_get_af_specific(temp.sa.sa_family)->sockaddr_len; + if(space_leftaddress_list.next, struct sctp_sockaddr_entry, list); if (sctp_is_any(&addr->a)) { - cnt = sctp_copy_laddrs_to_user(sk, bp->port, - getaddrs.addr_num, to); + cnt = sctp_copy_laddrs_to_user_old(sk, bp->port, + getaddrs.addr_num, + to); if (cnt < 0) { err = cnt; goto unlock; @@ -3419,7 +3520,7 @@ static int sctp_getsockopt_local_addrs(struct sock *sk, int len, copy_getaddrs: getaddrs.addr_num = cnt; - if (copy_to_user(optval, &getaddrs, sizeof(struct sctp_getaddrs))) + if (copy_to_user(optval, &getaddrs, sizeof(struct sctp_getaddrs_old))) err = -EFAULT; unlock: @@ -3427,6 +3528,99 @@ unlock: return err; } +static int sctp_getsockopt_local_addrs(struct sock *sk, int len, + char __user *optval, int __user *optlen) +{ + struct sctp_bind_addr *bp; + struct sctp_association *asoc; + struct list_head *pos; + int cnt = 0; + struct sctp_getaddrs getaddrs; + struct sctp_sockaddr_entry *addr; + void __user *to; + union sctp_addr temp; + struct sctp_sock *sp = sctp_sk(sk); + int addrlen; + rwlock_t *addr_lock; + int err = 0; + size_t space_left; + int bytes_copied; + + if (len <= sizeof(struct sctp_getaddrs)) + return -EINVAL; + + if (copy_from_user(&getaddrs, optval, sizeof(struct sctp_getaddrs))) + return -EFAULT; + + /* + * For UDP-style sockets, id specifies the association to query. + * If the id field is set to the value '0' then the locally bound + * addresses are returned without regard to any particular + * association. + */ + if (0 == getaddrs.assoc_id) { + bp = &sctp_sk(sk)->ep->base.bind_addr; + addr_lock = &sctp_sk(sk)->ep->base.addr_lock; + } else { + asoc = sctp_id2assoc(sk, getaddrs.assoc_id); + if (!asoc) + return -EINVAL; + bp = &asoc->base.bind_addr; + addr_lock = &asoc->base.addr_lock; + } + + to = optval + offsetof(struct sctp_getaddrs,addrs); + space_left = len - sizeof(struct sctp_getaddrs) - + offsetof(struct sctp_getaddrs,addrs); + + sctp_read_lock(addr_lock); + + /* If the endpoint is bound to 0.0.0.0 or ::0, get the valid + * addresses from the global local address list. + */ + if (sctp_list_single_entry(&bp->address_list)) { + addr = list_entry(bp->address_list.next, + struct sctp_sockaddr_entry, list); + if (sctp_is_any(&addr->a)) { + cnt = sctp_copy_laddrs_to_user(sk, bp->port, + &to, space_left); + if (cnt < 0) { + err = cnt; + goto unlock; + } + goto copy_getaddrs; + } + } + + list_for_each(pos, &bp->address_list) { + addr = list_entry(pos, struct sctp_sockaddr_entry, list); + memcpy(&temp, &addr->a, sizeof(temp)); + sctp_get_pf_specific(sk->sk_family)->addr_v4map(sp, &temp); + addrlen = sctp_get_af_specific(temp.sa.sa_family)->sockaddr_len; + if(space_left < addrlen) + return -ENOMEM; /*fixme: right error?*/ + temp.v4.sin_port = htons(temp.v4.sin_port); + if (copy_to_user(to, &temp, addrlen)) { + err = -EFAULT; + goto unlock; + } + to += addrlen; + cnt ++; + space_left -= addrlen; + } + +copy_getaddrs: + if (put_user(cnt, &((struct sctp_getaddrs __user *)optval)->addr_num)) + return -EFAULT; + bytes_copied = ((char __user *)to) - optval; + if (put_user(bytes_copied, optlen)) + return -EFAULT; + +unlock: + sctp_read_unlock(addr_lock); + return err; +} + /* 7.1.10 Set Primary Address (SCTP_PRIMARY_ADDR) * * Requests that the local SCTP stack use the enclosed peer address as @@ -3807,12 +4001,20 @@ SCTP_STATIC int sctp_getsockopt(struct sock *sk, int level, int optname, case SCTP_INITMSG: retval = sctp_getsockopt_initmsg(sk, len, optval, optlen); break; - case SCTP_GET_PEER_ADDRS_NUM: - retval = sctp_getsockopt_peer_addrs_num(sk, len, optval, + case SCTP_GET_PEER_ADDRS_NUM_OLD: + retval = sctp_getsockopt_peer_addrs_num_old(sk, len, optval, + optlen); + break; + case SCTP_GET_LOCAL_ADDRS_NUM_OLD: + retval = sctp_getsockopt_local_addrs_num_old(sk, len, optval, + optlen); + break; + case SCTP_GET_PEER_ADDRS_OLD: + retval = sctp_getsockopt_peer_addrs_old(sk, len, optval, optlen); break; - case SCTP_GET_LOCAL_ADDRS_NUM: - retval = sctp_getsockopt_local_addrs_num(sk, len, optval, + case SCTP_GET_LOCAL_ADDRS_OLD: + retval = sctp_getsockopt_local_addrs_old(sk, len, optval, optlen); break; case SCTP_GET_PEER_ADDRS: -- cgit v0.10.2 From 20c9c825b12fcb8526a29cf20a17a5a3fc581726 Mon Sep 17 00:00:00 2001 From: Sridhar Samudrala Date: Thu, 6 Oct 2005 21:37:01 -0700 Subject: [SCTP] Fix SCTP socket options to work with 32-bit apps on 64-bit kernels. Adds alignment attribute to a few structures used with SCTP socket options so that the sizes and offsets remain the same when built using either 32 or 64 bit tools. Signed-off-by: Sridhar Samudrala Signed-off-by: David S. Miller diff --git a/include/net/sctp/user.h b/include/net/sctp/user.h index e81ab52..1c5f19f 100644 --- a/include/net/sctp/user.h +++ b/include/net/sctp/user.h @@ -243,7 +243,7 @@ struct sctp_paddr_change { int spc_state; int spc_error; sctp_assoc_t spc_assoc_id; -}; +} __attribute__((packed, aligned(4))); /* * spc_state: 32 bits (signed integer) @@ -468,7 +468,7 @@ struct sctp_assocparams { struct sctp_setpeerprim { sctp_assoc_t sspp_assoc_id; struct sockaddr_storage sspp_addr; -}; +} __attribute__((packed, aligned(4))); /* * 7.1.10 Set Primary Address (SCTP_PRIMARY_ADDR) @@ -481,7 +481,7 @@ struct sctp_setpeerprim { struct sctp_prim { sctp_assoc_t ssp_assoc_id; struct sockaddr_storage ssp_addr; -}; +} __attribute__((packed, aligned(4))); /* * 7.1.11 Set Adaption Layer Indicator (SCTP_ADAPTION_LAYER) @@ -508,7 +508,7 @@ struct sctp_paddrparams { struct sockaddr_storage spp_address; __u32 spp_hbinterval; __u16 spp_pathmaxrxt; -}; +} __attribute__((packed, aligned(4))); /* * 7.2.2 Peer Address Information @@ -527,7 +527,7 @@ struct sctp_paddrinfo { __u32 spinfo_srtt; __u32 spinfo_rto; __u32 spinfo_mtu; -}; +} __attribute__((packed, aligned(4))); /* Peer addresses's state. */ enum sctp_spinfo_state { -- cgit v0.10.2 From eb98129eec7fa605f0407dfd92d40ee8ddf5cd9a Mon Sep 17 00:00:00 2001 From: Tom 'spot' Callaway Date: Thu, 6 Oct 2005 22:14:59 -0700 Subject: [SPARC32]: Enable generic IOMAP. This helps some PCI stuff build. Signed-off-by: Tom 'spot' Callaway Signed-off-by: David S. Miller diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 6537445..f7c51b8 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -21,6 +21,10 @@ config GENERIC_ISA_DMA bool default y +config GENERIC_IOMAP + bool + default y + source "init/Kconfig" menu "General machine setup" diff --git a/arch/sparc/defconfig b/arch/sparc/defconfig index a698562..8a3aef1e 100644 --- a/arch/sparc/defconfig +++ b/arch/sparc/defconfig @@ -5,6 +5,7 @@ CONFIG_MMU=y CONFIG_UID16=y CONFIG_HIGHMEM=y CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_IOMAP=y # # Code maturity level options -- cgit v0.10.2 From 0f21ba7cc3320d33459ecb3f538f1a42040c29cd Mon Sep 17 00:00:00 2001 From: Eric Kinzie Date: Thu, 6 Oct 2005 22:19:28 -0700 Subject: [ATM]: add support for LECS addresses learned from network From: Eric Kinzie Signed-off-by: Chas Williams Signed-off-by: David S. Miller diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h index f1fd849..aca9b34 100644 --- a/include/linux/atmdev.h +++ b/include/linux/atmdev.h @@ -76,6 +76,13 @@ struct atm_dev_stats { /* set interface ESI */ #define ATM_SETESIF _IOW('a',ATMIOC_ITF+13,struct atmif_sioc) /* force interface ESI */ +#define ATM_ADDLECSADDR _IOW('a', ATMIOC_ITF+14, struct atmif_sioc) + /* register a LECS address */ +#define ATM_DELLECSADDR _IOW('a', ATMIOC_ITF+15, struct atmif_sioc) + /* unregister a LECS address */ +#define ATM_GETLECSADDR _IOW('a', ATMIOC_ITF+16, struct atmif_sioc) + /* retrieve LECS address(es) */ + #define ATM_GETSTAT _IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc) /* get AAL layer statistics */ #define ATM_GETSTATZ _IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc) @@ -328,6 +335,8 @@ struct atm_dev_addr { struct list_head entry; /* next address */ }; +enum atm_addr_type_t { ATM_ADDR_LOCAL, ATM_ADDR_LECS }; + struct atm_dev { const struct atmdev_ops *ops; /* device operations; NULL if unused */ const struct atmphy_ops *phy; /* PHY operations, may be undefined */ @@ -338,6 +347,7 @@ struct atm_dev { void *phy_data; /* private PHY date */ unsigned long flags; /* device flags (ATM_DF_*) */ struct list_head local; /* local ATM addresses */ + struct list_head lecs; /* LECS ATM addresses learned via ILMI */ unsigned char esi[ESI_LEN]; /* ESI ("MAC" addr) */ struct atm_cirange ci_range; /* VPI/VCI range */ struct k_atm_dev_stats stats; /* statistics */ diff --git a/net/atm/addr.c b/net/atm/addr.c index a30d0bf..3060fd0 100644 --- a/net/atm/addr.c +++ b/net/atm/addr.c @@ -44,31 +44,43 @@ static void notify_sigd(struct atm_dev *dev) sigd_enq(NULL, as_itf_notify, NULL, &pvc, NULL); } -void atm_reset_addr(struct atm_dev *dev) +void atm_reset_addr(struct atm_dev *dev, enum atm_addr_type_t atype) { unsigned long flags; struct atm_dev_addr *this, *p; + struct list_head *head; spin_lock_irqsave(&dev->lock, flags); - list_for_each_entry_safe(this, p, &dev->local, entry) { + if (atype == ATM_ADDR_LECS) + head = &dev->lecs; + else + head = &dev->local; + list_for_each_entry_safe(this, p, head, entry) { list_del(&this->entry); kfree(this); } spin_unlock_irqrestore(&dev->lock, flags); - notify_sigd(dev); + if (head == &dev->local) + notify_sigd(dev); } -int atm_add_addr(struct atm_dev *dev, struct sockaddr_atmsvc *addr) +int atm_add_addr(struct atm_dev *dev, struct sockaddr_atmsvc *addr, + enum atm_addr_type_t atype) { unsigned long flags; struct atm_dev_addr *this; + struct list_head *head; int error; error = check_addr(addr); if (error) return error; spin_lock_irqsave(&dev->lock, flags); - list_for_each_entry(this, &dev->local, entry) { + if (atype == ATM_ADDR_LECS) + head = &dev->lecs; + else + head = &dev->local; + list_for_each_entry(this, head, entry) { if (identical(&this->addr, addr)) { spin_unlock_irqrestore(&dev->lock, flags); return -EEXIST; @@ -80,28 +92,36 @@ int atm_add_addr(struct atm_dev *dev, struct sockaddr_atmsvc *addr) return -ENOMEM; } this->addr = *addr; - list_add(&this->entry, &dev->local); + list_add(&this->entry, head); spin_unlock_irqrestore(&dev->lock, flags); - notify_sigd(dev); + if (head == &dev->local) + notify_sigd(dev); return 0; } -int atm_del_addr(struct atm_dev *dev, struct sockaddr_atmsvc *addr) +int atm_del_addr(struct atm_dev *dev, struct sockaddr_atmsvc *addr, + enum atm_addr_type_t atype) { unsigned long flags; struct atm_dev_addr *this; + struct list_head *head; int error; error = check_addr(addr); if (error) return error; spin_lock_irqsave(&dev->lock, flags); - list_for_each_entry(this, &dev->local, entry) { + if (atype == ATM_ADDR_LECS) + head = &dev->lecs; + else + head = &dev->local; + list_for_each_entry(this, head, entry) { if (identical(&this->addr, addr)) { list_del(&this->entry); spin_unlock_irqrestore(&dev->lock, flags); kfree(this); - notify_sigd(dev); + if (head == &dev->local) + notify_sigd(dev); return 0; } } @@ -110,22 +130,27 @@ int atm_del_addr(struct atm_dev *dev, struct sockaddr_atmsvc *addr) } int atm_get_addr(struct atm_dev *dev, struct sockaddr_atmsvc __user * buf, - size_t size) + size_t size, enum atm_addr_type_t atype) { unsigned long flags; struct atm_dev_addr *this; + struct list_head *head; int total = 0, error; struct sockaddr_atmsvc *tmp_buf, *tmp_bufp; spin_lock_irqsave(&dev->lock, flags); - list_for_each_entry(this, &dev->local, entry) + if (atype == ATM_ADDR_LECS) + head = &dev->lecs; + else + head = &dev->local; + list_for_each_entry(this, head, entry) total += sizeof(struct sockaddr_atmsvc); tmp_buf = tmp_bufp = kmalloc(total, GFP_ATOMIC); if (!tmp_buf) { spin_unlock_irqrestore(&dev->lock, flags); return -ENOMEM; } - list_for_each_entry(this, &dev->local, entry) + list_for_each_entry(this, head, entry) memcpy(tmp_bufp++, &this->addr, sizeof(struct sockaddr_atmsvc)); spin_unlock_irqrestore(&dev->lock, flags); error = total > size ? -E2BIG : total; diff --git a/net/atm/addr.h b/net/atm/addr.h index 3099d21..f39433a 100644 --- a/net/atm/addr.h +++ b/net/atm/addr.h @@ -9,10 +9,12 @@ #include #include - -void atm_reset_addr(struct atm_dev *dev); -int atm_add_addr(struct atm_dev *dev,struct sockaddr_atmsvc *addr); -int atm_del_addr(struct atm_dev *dev,struct sockaddr_atmsvc *addr); -int atm_get_addr(struct atm_dev *dev,struct sockaddr_atmsvc __user *buf,size_t size); +void atm_reset_addr(struct atm_dev *dev, enum atm_addr_type_t type); +int atm_add_addr(struct atm_dev *dev, struct sockaddr_atmsvc *addr, + enum atm_addr_type_t type); +int atm_del_addr(struct atm_dev *dev, struct sockaddr_atmsvc *addr, + enum atm_addr_type_t type); +int atm_get_addr(struct atm_dev *dev, struct sockaddr_atmsvc __user *buf, + size_t size, enum atm_addr_type_t type); #endif diff --git a/net/atm/resources.c b/net/atm/resources.c index a57a926..415d261 100644 --- a/net/atm/resources.c +++ b/net/atm/resources.c @@ -40,6 +40,7 @@ static struct atm_dev *__alloc_atm_dev(const char *type) dev->link_rate = ATM_OC3_PCR; spin_lock_init(&dev->lock); INIT_LIST_HEAD(&dev->local); + INIT_LIST_HEAD(&dev->lecs); return dev; } @@ -320,10 +321,12 @@ int atm_dev_ioctl(unsigned int cmd, void __user *arg) error = -EPERM; goto done; } - atm_reset_addr(dev); + atm_reset_addr(dev, ATM_ADDR_LOCAL); break; case ATM_ADDADDR: case ATM_DELADDR: + case ATM_ADDLECSADDR: + case ATM_DELLECSADDR: if (!capable(CAP_NET_ADMIN)) { error = -EPERM; goto done; @@ -335,14 +338,21 @@ int atm_dev_ioctl(unsigned int cmd, void __user *arg) error = -EFAULT; goto done; } - if (cmd == ATM_ADDADDR) - error = atm_add_addr(dev, &addr); + if (cmd == ATM_ADDADDR || cmd == ATM_ADDLECSADDR) + error = atm_add_addr(dev, &addr, + (cmd == ATM_ADDADDR ? + ATM_ADDR_LOCAL : ATM_ADDR_LECS)); else - error = atm_del_addr(dev, &addr); + error = atm_del_addr(dev, &addr, + (cmd == ATM_DELADDR ? + ATM_ADDR_LOCAL : ATM_ADDR_LECS)); goto done; } case ATM_GETADDR: - error = atm_get_addr(dev, buf, len); + case ATM_GETLECSADDR: + error = atm_get_addr(dev, buf, len, + (cmd == ATM_GETADDR ? + ATM_ADDR_LOCAL : ATM_ADDR_LECS)); if (error < 0) goto done; size = error; -- cgit v0.10.2 From 06f619ccb3319759c2acf91c7ca02b6b1d9ed343 Mon Sep 17 00:00:00 2001 From: Daniel Ritz Date: Mon, 12 Sep 2005 11:47:04 +0200 Subject: [ALSA] snd_opl3sa2: add missing pnp_unregister_driver() calls OPL3SA2 driver Signed-off-by: Daniel Ritz Signed-off-by: Takashi Iwai diff --git a/sound/isa/opl3sa2.c b/sound/isa/opl3sa2.c index e2d2bab..4ba268f 100644 --- a/sound/isa/opl3sa2.c +++ b/sound/isa/opl3sa2.c @@ -914,6 +914,7 @@ static int __init alsa_card_opl3sa2_init(void) #endif #ifdef CONFIG_PNP pnp_unregister_card_driver(&opl3sa2_pnpc_driver); + pnp_unregister_driver(&opl3sa2_pnp_driver); #endif return -ENODEV; } @@ -927,6 +928,7 @@ static void __exit alsa_card_opl3sa2_exit(void) #ifdef CONFIG_PNP /* PnP cards first */ pnp_unregister_card_driver(&opl3sa2_pnpc_driver); + pnp_unregister_driver(&opl3sa2_pnp_driver); #endif for (idx = 0; idx < SNDRV_CARDS; idx++) snd_card_free(snd_opl3sa2_legacy[idx]); -- cgit v0.10.2 From 0444e2aca9ac89f571f0bb7781d12818719e4baf Mon Sep 17 00:00:00 2001 From: Sasha Khapyorsky Date: Tue, 13 Sep 2005 11:21:30 +0200 Subject: [ALSA] no templated index for mc97 controls AC97 Codec No index is templated for mdoem controls. Signed-off-by: Sasha Khapyorsky Signed-off-by: Takashi Iwai diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c index e64cb07..f221eba 100644 --- a/sound/pci/ac97/ac97_codec.c +++ b/sound/pci/ac97/ac97_codec.c @@ -1557,7 +1557,7 @@ static int snd_ac97_modem_build(snd_card_t * card, ac97_t * ac97) /* build modem switches */ for (idx = 0; idx < ARRAY_SIZE(snd_ac97_controls_modem_switches); idx++) - if ((err = snd_ctl_add(card, snd_ac97_cnew(&snd_ac97_controls_modem_switches[idx], ac97))) < 0) + if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_ac97_controls_modem_switches[idx], ac97))) < 0) return err; /* build chip specific controls */ -- cgit v0.10.2 From 27bcaa693c866b9bccf94ee5b60eaf705e90c341 Mon Sep 17 00:00:00 2001 From: Sasha Khapyorsky Date: Tue, 13 Sep 2005 11:23:13 +0200 Subject: [ALSA] no templated index for si3036 modem controls AC97 Codec No index is templated for si3036 modem controls. Signed-off-by: Sasha Khapyorsky Signed-off-by: Takashi Iwai diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c index 045ddc7..0238cc6 100644 --- a/sound/pci/ac97/ac97_patch.c +++ b/sound/pci/ac97/ac97_patch.c @@ -2752,7 +2752,11 @@ AC97_DOUBLE("Modem Speaker Volume", 0x5c, 14, 12, 3, 1) static int patch_si3036_specific(ac97_t * ac97) { - return patch_build_controls(ac97, snd_ac97_controls_si3036, ARRAY_SIZE(snd_ac97_controls_si3036)); + int idx, err; + for (idx = 0; idx < ARRAY_SIZE(snd_ac97_controls_si3036); idx++) + if ((err = snd_ctl_add(ac97->bus->card, snd_ctl_new1(&snd_ac97_controls_si3036[idx], ac97))) < 0) + return err; + return 0; } static struct snd_ac97_build_ops patch_si3036_ops = { -- cgit v0.10.2 From 84802f0df3425ae0f9987af0d35ea19910479ec0 Mon Sep 17 00:00:00 2001 From: Sasha Khapyorsky Date: Tue, 13 Sep 2005 11:25:54 +0200 Subject: [ALSA] hda-codec - 'empty' generic mfg-only codec HDA generic driver This creates 'empty' hda generic for unknown MFG-only codecs. Signed-off-by: Sasha Khapyorsky Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index 5b829a1..d0eb9f2 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -881,10 +881,8 @@ int snd_hda_parse_generic_codec(struct hda_codec *codec) struct hda_gspec *spec; int err; - if(!codec->afg) { - snd_printdd("hda_generic: no generic modem yet\n"); - return -ENODEV; - } + if(!codec->afg) + return 0; spec = kzalloc(sizeof(*spec), GFP_KERNEL); if (spec == NULL) { -- cgit v0.10.2 From e8dede5a136bd7ef36d1779ea173cfd504dff0cb Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 13 Sep 2005 11:28:53 +0200 Subject: [ALSA] hda-intel - Disable DMA position auto-correction HDA Intel driver Disable the auto-correction of DMA position temporarily. It doesn't work as expected yet... Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 9590ece..6fe696e 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -1137,6 +1137,7 @@ static snd_pcm_uframes_t azx_pcm_pointer(snd_pcm_substream_t *substream) pos = azx_sd_readl(azx_dev, SD_LPIB); if (chip->position_fix == POS_FIX_FIFO) pos += azx_dev->fifo_size; +#if 0 /* disabled temprarily, auto-correction doesn't work well... */ else if (chip->position_fix == POS_FIX_AUTO && azx_dev->period_updating) { /* check the validity of DMA position */ unsigned int diff = 0; @@ -1157,6 +1158,10 @@ static snd_pcm_uframes_t azx_pcm_pointer(snd_pcm_substream_t *substream) } azx_dev->period_updating = 0; } +#else + else if (chip->position_fix == POS_FIX_AUTO) + pos += azx_dev->fifo_size; +#endif } if (pos >= azx_dev->bufsize) pos = 0; -- cgit v0.10.2 From 1dcee12591320d79e4fc5bcdc4aa8a2522b7afdb Mon Sep 17 00:00:00 2001 From: Dirk Opfer Date: Wed, 14 Sep 2005 20:52:25 +0200 Subject: [ALSA] Fix pm_message_t in PXA2XX-AC97 driver ARM PXA2XX driver Fix pm_message_t in PXA2XX-AC97 driver. Signed-off-by: Takashi Iwai diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c index 29450be..38b20ef 100644 --- a/sound/arm/pxa2xx-ac97.c +++ b/sound/arm/pxa2xx-ac97.c @@ -245,7 +245,7 @@ static pxa2xx_pcm_client_t pxa2xx_ac97_pcm_client = { #ifdef CONFIG_PM -static int pxa2xx_ac97_do_suspend(snd_card_t *card, unsigned int state) +static int pxa2xx_ac97_do_suspend(snd_card_t *card, pm_message_t state) { if (card->power_state != SNDRV_CTL_POWER_D3cold) { pxa2xx_audio_ops_t *platform_ops = card->dev->platform_data; -- cgit v0.10.2 From 460dc98afc6db255344a06c8da1196e2a2744758 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Fri, 16 Sep 2005 16:56:01 +0200 Subject: [ALSA] usb-audio: ignore Hercules DJ Console mixer errors USB generic driver Add a quirk entry for the Hercules DJ Console to ignore timeouts on some mixer control transfers. Signed-off-by: Clemens Ladisch diff --git a/sound/usb/usbmixer_maps.c b/sound/usb/usbmixer_maps.c index f05500b..13199ff 100644 --- a/sound/usb/usbmixer_maps.c +++ b/sound/usb/usbmixer_maps.c @@ -238,6 +238,11 @@ static struct usbmix_ctl_map usbmix_ctl_maps[] = { .selector_map = audigy2nx_selectors, }, { + /* Hercules DJ Console */ + .id = USB_ID(0x06f8, 0xd002), + .ignore_ctl_error = 1, + }, + { .id = USB_ID(0x08bb, 0x2702), .map = linex_map, .ignore_ctl_error = 1, -- cgit v0.10.2 From 3a91e95969b84a56c7fef15ba25a5f6a17dd94b2 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Fri, 16 Sep 2005 18:46:36 +0200 Subject: [ALSA] remove bogus match method for ac97_bus AC97 Codec The bus_id is initialized with a generic identifier string which is not really useful for proper driver matching. Let the driver decide what it needs via its probe method instead. Signed-off-by: Nicolas Pitre Signed-off-by: Takashi Iwai diff --git a/sound/pci/ac97/ac97_bus.c b/sound/pci/ac97/ac97_bus.c index 227f8b9..6f0e4bd 100644 --- a/sound/pci/ac97/ac97_bus.c +++ b/sound/pci/ac97/ac97_bus.c @@ -17,12 +17,13 @@ #include /* - * Codec families have names seperated by commas, so we search for an - * individual codec name within the family string. + * Let drivers decide whether they want to support given codec from their + * probe method. Drivers have direct access to the ac97_t structure and may + * decide based on the id field amongst other things. */ static int ac97_bus_match(struct device *dev, struct device_driver *drv) { - return (strstr(dev->bus_id, drv->name) != NULL); + return 1; } static int ac97_bus_suspend(struct device *dev, pm_message_t state) -- cgit v0.10.2 From 72e75de2df9a7116d0afbcd5810b2a8fd4bf7559 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Fri, 16 Sep 2005 18:49:22 +0200 Subject: [ALSA] remove redundent assignment to the ac97 device structure AC97 Codec Don't use dev.platform_data to store a reference to the containing ac97_t structure. Such assignment is redundent since we can deduce the ac97_t structure location from the contained device structure. This sets platform_data free for other purposes. Signed-off-by: Nicolas Pitre Signed-off-by: Takashi Iwai diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h index 2857cf0..d11f348 100644 --- a/include/sound/ac97_codec.h +++ b/include/sound/ac97_codec.h @@ -527,6 +527,8 @@ struct _snd_ac97 { struct device dev; }; +#define to_ac97_t(d) container_of(d, struct _snd_ac97, dev) + /* conditions */ static inline int ac97_is_audio(ac97_t * ac97) { diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c index f221eba..41fc290 100644 --- a/sound/pci/ac97/ac97_codec.c +++ b/sound/pci/ac97/ac97_codec.c @@ -1828,7 +1828,6 @@ static int snd_ac97_dev_register(snd_device_t *device) ac97->dev.bus = &ac97_bus_type; ac97->dev.parent = ac97->bus->card->dev; - ac97->dev.platform_data = ac97; ac97->dev.release = ac97_device_release; snprintf(ac97->dev.bus_id, BUS_ID_SIZE, "card%d-%d", ac97->bus->card->number, ac97->num); if ((err = device_register(&ac97->dev)) < 0) { -- cgit v0.10.2 From 90b66e833261618e11d71a35f2488a7d664a4566 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Fri, 16 Sep 2005 18:50:53 +0200 Subject: [ALSA] clean suspend/resume calls for ac97_bus_type AC97 Codec A single call to the driver suspend/resume method for each device is enough. The level and SUSPEND_*/RESUME_* arguments are deprecated and said to be removed eventually anyway (no other subsystem are using them anymore except platform devices). Signed-off-by: Nicolas Pitre Signed-off-by: Takashi Iwai diff --git a/sound/pci/ac97/ac97_bus.c b/sound/pci/ac97/ac97_bus.c index 6f0e4bd..becbc42 100644 --- a/sound/pci/ac97/ac97_bus.c +++ b/sound/pci/ac97/ac97_bus.c @@ -30,13 +30,8 @@ static int ac97_bus_suspend(struct device *dev, pm_message_t state) { int ret = 0; - if (dev->driver && dev->driver->suspend) { - ret = dev->driver->suspend(dev, state, SUSPEND_DISABLE); - if (ret == 0) - ret = dev->driver->suspend(dev, state, SUSPEND_SAVE_STATE); - if (ret == 0) - ret = dev->driver->suspend(dev, state, SUSPEND_POWER_DOWN); - } + if (dev->driver && dev->driver->suspend) + ret = dev->driver->suspend(dev, state, SUSPEND_POWER_DOWN); return ret; } @@ -44,13 +39,8 @@ static int ac97_bus_resume(struct device *dev) { int ret = 0; - if (dev->driver && dev->driver->resume) { + if (dev->driver && dev->driver->resume) ret = dev->driver->resume(dev, RESUME_POWER_ON); - if (ret == 0) - ret = dev->driver->resume(dev, RESUME_RESTORE_STATE); - if (ret == 0) - ret = dev->driver->resume(dev, RESUME_ENABLE); - } return ret; } -- cgit v0.10.2 From db99055f8d8eb54d9da55293a11b82e9d53ca80d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 16 Sep 2005 19:07:52 +0200 Subject: [ALSA] via82xx - Add a dxs whitelist entry VIA82xx driver Added a dxs whitelist entry for an ECS mobo. Signed-off-by: Takashi Iwai diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c index 6db7de6..964113f 100644 --- a/sound/pci/via82xx.c +++ b/sound/pci/via82xx.c @@ -2147,6 +2147,7 @@ static int __devinit check_dxs_list(struct pci_dev *pci) { .subvendor = 0x1019, .subdevice = 0x0996, .action = VIA_DXS_48K }, { .subvendor = 0x1019, .subdevice = 0x0a81, .action = VIA_DXS_NO_VRA }, /* ECS K7VTA3 v8.0 */ { .subvendor = 0x1019, .subdevice = 0x0a85, .action = VIA_DXS_NO_VRA }, /* ECS L7VMM2 */ + { .subvendor = 0x1019, .subdevice = 0xa101, .action = VIA_DXS_SRC }, { .subvendor = 0x1025, .subdevice = 0x0033, .action = VIA_DXS_NO_VRA }, /* Acer Inspire 1353LM */ { .subvendor = 0x1025, .subdevice = 0x0046, .action = VIA_DXS_SRC }, /* Acer Aspire 1524 WLMi */ { .subvendor = 0x1043, .subdevice = 0x8095, .action = VIA_DXS_NO_VRA }, /* ASUS A7V8X (FIXME: possibly VIA_DXS_ENABLE?)*/ -- cgit v0.10.2 From 5a2a68f5a1dab785d60a4575f48af5b15ab6328d Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 19 Sep 2005 12:24:00 +0200 Subject: [ALSA] usb-audio: add Roland RD-700SX support USB generic driver Add a quirk entry for the Roland RD-700SX. This should work for the RD-300SX, too. Signed-off-by: Clemens Ladisch diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h index f74e652..36f9a3b 100644 --- a/sound/usb/usbquirks.h +++ b/sound/usb/usbquirks.h @@ -1010,6 +1010,19 @@ YAMAHA_DEVICE(0x7010, "UB99"), } } }, +{ + USB_DEVICE_VENDOR_SPEC(0x0582, 0x007a), + .driver_info = (unsigned long) & (const snd_usb_audio_quirk_t) { + .vendor_name = "Roland", + /* RD-700SX, RD-300SX */ + .ifnum = 0, + .type = QUIRK_MIDI_FIXED_ENDPOINT, + .data = & (const snd_usb_midi_endpoint_info_t) { + .out_cables = 0x0003, + .in_cables = 0x0003 + } + } +}, /* Midiman/M-Audio devices */ { -- cgit v0.10.2 From 1e8bdcaf82268ac713cbbaffc14801147be42ae7 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 19 Sep 2005 15:21:17 +0200 Subject: [ALSA] Add iBook 1.33GHz support PPC PMAC driver Added the support of iBook 1.33GHz. Signed-off-by: Takashi Iwai diff --git a/sound/ppc/pmac.c b/sound/ppc/pmac.c index e35b48d..392b2ab 100644 --- a/sound/ppc/pmac.c +++ b/sound/ppc/pmac.c @@ -988,6 +988,7 @@ static int __init snd_pmac_detect(pmac_t *chip) case 0x33: case 0x29: case 0x24: + case 0x50: case 0x5c: chip->num_freqs = ARRAY_SIZE(tumbler_freqs); chip->model = PMAC_SNAPPER; -- cgit v0.10.2 From f542fda8f8cd0cc0e4bffef42b27c7dc59cd07d3 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Tue, 20 Sep 2005 09:06:36 +0200 Subject: [ALSA] usb-audio: add more Yamaha USB MIDI devices USB generic driver Add quirk entries for four unknown Yamaha USB MIDI devices. Signed-off-by: Clemens Ladisch diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h index 36f9a3b..5c6b3da 100644 --- a/sound/usb/usbquirks.h +++ b/sound/usb/usbquirks.h @@ -117,6 +117,10 @@ YAMAHA_DEVICE(0x103a, NULL), YAMAHA_DEVICE(0x103b, NULL), YAMAHA_DEVICE(0x103c, NULL), YAMAHA_DEVICE(0x103d, NULL), +YAMAHA_DEVICE(0x103e, NULL), +YAMAHA_DEVICE(0x103f, NULL), +YAMAHA_DEVICE(0x1040, NULL), +YAMAHA_DEVICE(0x1041, NULL), YAMAHA_DEVICE(0x2000, "DGP-7"), YAMAHA_DEVICE(0x2001, "DGP-5"), YAMAHA_DEVICE(0x2002, NULL), -- cgit v0.10.2 From 31ab9523ed3773d5de7c07b3b6c4c00ddb06045e Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 26 Sep 2005 08:55:01 +0200 Subject: [ALSA] usb-audio: add another ID for the TerraTec PHASE26 USB generic driver There is another revision of the PHASE26 with a different product ID; add a quirk entry for that, too. Signed-off-by: Clemens Ladisch diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h index 5c6b3da..370f0e3 100644 --- a/sound/usb/usbquirks.h +++ b/sound/usb/usbquirks.h @@ -1356,10 +1356,20 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, +/* TerraTec devices */ +{ + USB_DEVICE_VENDOR_SPEC(0x0ccd, 0x0012), + .driver_info = (unsigned long) & (const snd_usb_audio_quirk_t) { + .vendor_name = "TerraTec", + .product_name = "PHASE 26", + .ifnum = 3, + .type = QUIRK_MIDI_STANDARD_INTERFACE + } +}, { USB_DEVICE_VENDOR_SPEC(0x0ccd, 0x0013), .driver_info = (unsigned long) & (const snd_usb_audio_quirk_t) { - .vendor_name = "Terratec", + .vendor_name = "TerraTec", .product_name = "PHASE 26", .ifnum = 3, .type = QUIRK_MIDI_STANDARD_INTERFACE -- cgit v0.10.2 From d31cbbfd80a84696847913b7486a998481038663 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 26 Sep 2005 09:59:57 +0200 Subject: [ALSA] usb-audio: increase max buffer size USB generic driver Increase the maximum PCM buffer size to 1 MB. The USB driver doesn't have any inherent buffer size limit, and big multichannel interfaces may benefit from this. Signed-off-by: Clemens Ladisch diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index d5ae2055..2ead878 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -1444,9 +1444,9 @@ static snd_pcm_hardware_t snd_usb_playback = SNDRV_PCM_INFO_BATCH | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER, - .buffer_bytes_max = (256*1024), + .buffer_bytes_max = 1024 * 1024, .period_bytes_min = 64, - .period_bytes_max = (128*1024), + .period_bytes_max = 512 * 1024, .periods_min = 2, .periods_max = 1024, }; @@ -1458,9 +1458,9 @@ static snd_pcm_hardware_t snd_usb_capture = SNDRV_PCM_INFO_BATCH | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER, - .buffer_bytes_max = (256*1024), + .buffer_bytes_max = 1024 * 1024, .period_bytes_min = 64, - .period_bytes_max = (128*1024), + .period_bytes_max = 512 * 1024, .periods_min = 2, .periods_max = 1024, }; -- cgit v0.10.2 From a7175aab3f5cffe3c79575e56dfcfe87a41a74c7 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Thu, 29 Sep 2005 13:13:38 +0200 Subject: [ALSA] fix HD audio ALC260 mono (un)mute HDA Codec driver The ALC260 'Mono Playback Switch' is marked as an output in patch_realtek.c. It actually does not work unless it is marked as an input. Go figure... This was tested and confirmed on an HP xw4300. Signed-off-by: John W. Linville Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 849b5b5..9aca9b4 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2243,7 +2243,7 @@ static snd_kcontrol_new_t alc260_base_mixer[] = { HDA_CODEC_VOLUME("Headphone Playback Volume", 0x09, 0x0, HDA_OUTPUT), ALC_BIND_MUTE("Headphone Playback Switch", 0x09, 2, HDA_INPUT), HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT), - ALC_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_OUTPUT), + ALC_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT), HDA_CODEC_VOLUME("Capture Volume", 0x04, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Capture Switch", 0x04, 0x0, HDA_INPUT), { @@ -2270,7 +2270,7 @@ static snd_kcontrol_new_t alc260_hp_mixer[] = { HDA_CODEC_VOLUME("Headphone Playback Volume", 0x09, 0x0, HDA_OUTPUT), ALC_BIND_MUTE("Headphone Playback Switch", 0x09, 2, HDA_INPUT), HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT), - ALC_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_OUTPUT), + ALC_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT), HDA_CODEC_VOLUME("Capture Volume", 0x05, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Capture Switch", 0x05, 0x0, HDA_INPUT), { -- cgit v0.10.2 From 1c1fa8b69e6d538bcc1e58791938b31a2354ee65 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Thu, 29 Sep 2005 13:18:41 +0200 Subject: [ALSA] fix alc880_test_mixer typo HDA Codec driver Fix a typo (cut & paste) in the alc880_test_mixer structure. Signed-off-by: John W. Linville Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 9aca9b4..f62597e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -1385,8 +1385,8 @@ static snd_kcontrol_new_t alc880_test_mixer[] = { HDA_CODEC_VOLUME("Side Playback Volume", 0x0f, 0x0, HDA_OUTPUT), ALC_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), ALC_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT), - ALC_BIND_MUTE("CLFE Playback Volume", 0x0e, 2, HDA_INPUT), - ALC_BIND_MUTE("Side Playback Volume", 0x0f, 2, HDA_INPUT), + ALC_BIND_MUTE("CLFE Playback Switch", 0x0e, 2, HDA_INPUT), + ALC_BIND_MUTE("Side Playback Switch", 0x0f, 2, HDA_INPUT), PIN_CTL_TEST("Front Pin Mode", 0x14), PIN_CTL_TEST("Surround Pin Mode", 0x15), PIN_CTL_TEST("CLFE Pin Mode", 0x16), -- cgit v0.10.2 From 92447f3f1a1c1af418eb1dfee85a7685d9b9a3ef Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Thu, 29 Sep 2005 13:20:45 +0200 Subject: [ALSA] fix HD audio ALC882 lfe (un)mute HDA Codec driver Mark the ALC882 'LFE Playback Switch' as an input, like the other playback switch settings. Signed-off-by: John W. Linville Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index f62597e..429e478 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2501,7 +2501,7 @@ static snd_kcontrol_new_t alc882_base_mixer[] = { HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT), ALC_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT), - ALC_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_OUTPUT), + ALC_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT), HDA_CODEC_VOLUME("Side Playback Volume", 0x0f, 0x0, HDA_OUTPUT), ALC_BIND_MUTE("Side Playback Switch", 0x0f, 2, HDA_INPUT), HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT), -- cgit v0.10.2 From 35451088f445955fe460a38b25b97c263ff35033 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 29 Sep 2005 13:25:14 +0200 Subject: [ALSA] Fix confliction of capture controls on ALC880 test model HDA Codec driver Fixed the confliction of capture controls on ALC880 'test' model. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 429e478..7327deb 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -1409,18 +1409,6 @@ static snd_kcontrol_new_t alc880_test_mixer[] = { HDA_CODEC_MUTE("In-4 Playback Switch", 0x0b, 0x3, HDA_INPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x4, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x4, HDA_INPUT), - HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT), - HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT), - HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT), - HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT), - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Input Source", - .count = 2, - .info = alc_mux_enum_info, - .get = alc_mux_enum_get, - .put = alc_mux_enum_put, - }, { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Channel Mode", -- cgit v0.10.2 From c66186e1c966e7e115a86af55597c05c5512014b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 29 Sep 2005 13:49:44 +0200 Subject: [ALSA] via82xx - dxs_support entry for an ASUS mobo VIA82xx driver Addded a dxs_support entry for an ASUS mobo. Signed-off-by: Takashi Iwai diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c index 964113f..3c0205b 100644 --- a/sound/pci/via82xx.c +++ b/sound/pci/via82xx.c @@ -2153,6 +2153,7 @@ static int __devinit check_dxs_list(struct pci_dev *pci) { .subvendor = 0x1043, .subdevice = 0x8095, .action = VIA_DXS_NO_VRA }, /* ASUS A7V8X (FIXME: possibly VIA_DXS_ENABLE?)*/ { .subvendor = 0x1043, .subdevice = 0x80a1, .action = VIA_DXS_NO_VRA }, /* ASUS A7V8-X */ { .subvendor = 0x1043, .subdevice = 0x80b0, .action = VIA_DXS_NO_VRA }, /* ASUS A7V600 & K8V*/ + { .subvendor = 0x1043, .subdevice = 0x810d, .action = VIA_DXS_SRC }, /* ASUS */ { .subvendor = 0x1043, .subdevice = 0x812a, .action = VIA_DXS_SRC }, /* ASUS A8V Deluxe */ { .subvendor = 0x1071, .subdevice = 0x8375, .action = VIA_DXS_NO_VRA }, /* Vobis/Yakumo/Mitac notebook */ { .subvendor = 0x1071, .subdevice = 0x8399, .action = VIA_DXS_NO_VRA }, /* Umax AB 595T (VIA K8N800A - VT8237) */ -- cgit v0.10.2 From f12aa40c9d76af5add413731d30565327219c41f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 30 Sep 2005 16:56:59 +0200 Subject: [ALSA] emu10k1 - Fix loading of SBLive Game board EMU10K1/EMU10K2 driver Fixed the error at loading SBLive Game board (and possible other models). The PCI SSIDs of this board conflicts with SB Live 5.1 Platinum, which has no AC97 chip. Signed-off-by: Takashi Iwai diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h index 67bf3f1..14cb271 100644 --- a/include/sound/emu10k1.h +++ b/include/sound/emu10k1.h @@ -1059,7 +1059,7 @@ typedef struct { unsigned char spk71; /* Has 7.1 speakers */ unsigned char sblive51; /* SBLive! 5.1 - extout 0x11 -> center, 0x12 -> lfe */ unsigned char spdif_bug; /* Has Spdif phasing bug */ - unsigned char ac97_chip; /* Has an AC97 chip */ + unsigned char ac97_chip; /* Has an AC97 chip: 1 = mandatory, 2 = optional */ unsigned char ecard; /* APS EEPROM */ const char *driver; const char *name; diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index e87e842..e9cd8e0 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -756,9 +756,12 @@ static emu_chip_details_t emu_chip_details[] = { .sblive51 = 1} , /* Tested by alsa bugtrack user "hus" bug #1297 12th Aug 2005 */ {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80611102, - .driver = "EMU10K1", .name = "SBLive! Platinum 5.1 [SB0060]", + .driver = "EMU10K1", .name = "SBLive 5.1 [SB0060]", .id = "Live", .emu10k1_chip = 1, + .ac97_chip = 2, /* ac97 is optional; both SBLive 5.1 and platinum + * share the same IDs! + */ .sblive51 = 1} , {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80511102, .driver = "EMU10K1", .name = "SBLive! Value [CT4850]", diff --git a/sound/pci/emu10k1/emumixer.c b/sound/pci/emu10k1/emumixer.c index d71a72e..6994f90 100644 --- a/sound/pci/emu10k1/emumixer.c +++ b/sound/pci/emu10k1/emumixer.c @@ -802,8 +802,13 @@ int __devinit snd_emu10k1_mixer(emu10k1_t *emu, .read = snd_emu10k1_ac97_read, }; - if ((err = snd_ac97_bus(emu->card, 0, &ops, NULL, &pbus)) < 0) - return err; + if ((err = snd_ac97_bus(emu->card, 0, &ops, NULL, &pbus)) < 0) { + if (emu->card_capabilities->ac97_chip == 1) + return err; + snd_printd(KERN_INFO "emu10k1: AC97 is optional on this board\n"); + snd_printd(KERN_INFO" Proceeding without ac97 mixers...\n"); + goto no_ac97; /* FIXME: get rid of ugly gotos.. */ + } pbus->no_vra = 1; /* we don't need VRA */ memset(&ac97, 0, sizeof(ac97)); @@ -836,6 +841,7 @@ int __devinit snd_emu10k1_mixer(emu10k1_t *emu, for (; *c; c++) remove_ctl(card, *c); } else { + no_ac97: if (emu->card_capabilities->ecard) strcpy(emu->card->mixername, "EMU APS"); else if (emu->audigy) -- cgit v0.10.2 From 315e3bd717068624ce888f3d045a168acefc6ce8 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Tue, 4 Oct 2005 08:42:10 +0200 Subject: [ALSA] korg1212: fix typo KORG1212 driver Add a missing comma that made the stateName array one entry too short. Signed-off-by: Clemens Ladisch diff --git a/sound/pci/korg1212/korg1212.c b/sound/pci/korg1212/korg1212.c index 09f9cbe..5561fd4 100644 --- a/sound/pci/korg1212/korg1212.c +++ b/sound/pci/korg1212/korg1212.c @@ -442,7 +442,7 @@ static char* stateName[] = { "Setup for play", "Playing", "Monitor mode on", - "Calibrating" + "Calibrating", "Invalid" }; -- cgit v0.10.2 From b150869369adafb7cc0cf65ea500f9f3c4bbf857 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 4 Oct 2005 13:49:32 +0200 Subject: [ALSA] emu10k1 - Fix handling of ac97_chip=2 EMU10K1/EMU10K2 driver Fixed the handling of ac97_chip=2 capability type. The error occurs in snd_ac97_mixer(), not in snd_ac97_bus(). Also, release the unnecessary ac97_bus object in the error path. Signed-off-by: Takashi Iwai diff --git a/sound/pci/emu10k1/emumixer.c b/sound/pci/emu10k1/emumixer.c index 6994f90..7cc831c 100644 --- a/sound/pci/emu10k1/emumixer.c +++ b/sound/pci/emu10k1/emumixer.c @@ -802,21 +802,22 @@ int __devinit snd_emu10k1_mixer(emu10k1_t *emu, .read = snd_emu10k1_ac97_read, }; - if ((err = snd_ac97_bus(emu->card, 0, &ops, NULL, &pbus)) < 0) { - if (emu->card_capabilities->ac97_chip == 1) - return err; - snd_printd(KERN_INFO "emu10k1: AC97 is optional on this board\n"); - snd_printd(KERN_INFO" Proceeding without ac97 mixers...\n"); - goto no_ac97; /* FIXME: get rid of ugly gotos.. */ - } + if ((err = snd_ac97_bus(emu->card, 0, &ops, NULL, &pbus)) < 0) + return err; pbus->no_vra = 1; /* we don't need VRA */ memset(&ac97, 0, sizeof(ac97)); ac97.private_data = emu; ac97.private_free = snd_emu10k1_mixer_free_ac97; ac97.scaps = AC97_SCAP_NO_SPDIF; - if ((err = snd_ac97_mixer(pbus, &ac97, &emu->ac97)) < 0) - return err; + if ((err = snd_ac97_mixer(pbus, &ac97, &emu->ac97)) < 0) { + if (emu->card_capabilities->ac97_chip == 1) + return err; + snd_printd(KERN_INFO "emu10k1: AC97 is optional on this board\n"); + snd_printd(KERN_INFO" Proceeding without ac97 mixers...\n"); + snd_device_free(emu->card, pbus); + goto no_ac97; /* FIXME: get rid of ugly gotos.. */ + } if (emu->audigy) { /* set master volume to 0 dB */ snd_ac97_write(emu->ac97, AC97_MASTER, 0x0000); -- cgit v0.10.2 From 4d060fd16946d767ee903804c6769a26d7da7ab2 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 4 Oct 2005 13:50:44 +0200 Subject: [ALSA] ali5451 - Don't build non-existing modem PCM ALI5451 driver Don't build the modem PCM if the corresponding codec isn't detected. Signed-off-by: Takashi Iwai diff --git a/sound/pci/ali5451/ali5451.c b/sound/pci/ali5451/ali5451.c index d683f77..f35b558 100644 --- a/sound/pci/ali5451/ali5451.c +++ b/sound/pci/ali5451/ali5451.c @@ -1993,8 +1993,10 @@ static int __devinit snd_ali_mixer(ali_t * codec) if ((err = snd_ac97_mixer(codec->ac97_bus, &ac97, &codec->ac97[i])) < 0) { snd_printk("ali mixer %d creating error.\n", i); if(i == 0) - return err; - } + return err; + codec->num_of_codecs = 1; + break; + } } if (codec->spdif_support) { -- cgit v0.10.2 From 9c9565f709f28c12dadfe74b31f2c86ffd75f71e Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Wed, 5 Oct 2005 13:02:38 +0200 Subject: [ALSA] usb-audio: add another ID for Hercules DJ Console USB generic driver Add a mixer quirk entry for the Hercules DJ Console (Windows Edition) that uses a different USB product ID. Signed-off-by: Clemens Ladisch diff --git a/sound/usb/usbmixer_maps.c b/sound/usb/usbmixer_maps.c index 13199ff..c126443 100644 --- a/sound/usb/usbmixer_maps.c +++ b/sound/usb/usbmixer_maps.c @@ -238,7 +238,12 @@ static struct usbmix_ctl_map usbmix_ctl_maps[] = { .selector_map = audigy2nx_selectors, }, { - /* Hercules DJ Console */ + /* Hercules DJ Console (Windows Edition) */ + .id = USB_ID(0x06f8, 0xb000), + .ignore_ctl_error = 1, + }, + { + /* Hercules DJ Console (Macintosh Edition) */ .id = USB_ID(0x06f8, 0xd002), .ignore_ctl_error = 1, }, -- cgit v0.10.2 From a25f175c2f6962c38cdbacfc4b66b297f4fb54b2 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Wed, 5 Oct 2005 13:23:19 +0200 Subject: [ALSA] usb-audio: add MIDI quirk for Hercules DJ Console USB generic driver Add a quirk entry for the external MIDI ports of the Windows Edition of the Hercules DJ Console. Signed-off-by: Clemens Ladisch diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h index 370f0e3..948759d 100644 --- a/sound/usb/usbquirks.h +++ b/sound/usb/usbquirks.h @@ -1028,6 +1028,27 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, +/* Guillemot devices */ +{ + /* + * This is for the "Windows Edition" where the external MIDI ports are + * the only MIDI ports; the control data is reported through HID + * interfaces. The "Macintosh Edition" has ID 0xd002 and uses standard + * compliant USB MIDI ports for external MIDI and controls. + */ + USB_DEVICE_VENDOR_SPEC(0x06f8, 0xb000), + .driver_info = (unsigned long) & (const snd_usb_audio_quirk_t) { + .vendor_name = "Hercules", + .product_name = "DJ Console (WE)", + .ifnum = 4, + .type = QUIRK_MIDI_FIXED_ENDPOINT, + .data = & (const snd_usb_midi_endpoint_info_t) { + .out_cables = 0x0001, + .in_cables = 0x0001 + } + } +}, + /* Midiman/M-Audio devices */ { USB_DEVICE_VENDOR_SPEC(0x0763, 0x1002), -- cgit v0.10.2 From d85c3553df5e24cb3117385f0a17e1cc0436d148 Mon Sep 17 00:00:00 2001 From: Tom 'spot' Callaway Date: Fri, 7 Oct 2005 13:05:56 -0700 Subject: [SPARC]: Fix p9100 framebuffer in 2.6 The attached patch fixes the p9100 framebuffer so that text is viewable (not black on black, like it was before the patch). The linux logo displays for a very short period of time, then is replaced by a grey box. This leads me to believe that this framebuffer would have problems in X, but since there hasn't been a weitek driver for X in several millennia, this isn't something that I can confirm or deny. But this patch does get color console working on my SPARCbook 3TX. Signed-off-by: Tom 'spot' Callaway Signed-off-by: David S. Miller diff --git a/drivers/video/p9100.c b/drivers/video/p9100.c index 7808a01..b76a5a9 100644 --- a/drivers/video/p9100.c +++ b/drivers/video/p9100.c @@ -288,6 +288,9 @@ static void p9100_init_one(struct sbus_dev *sdev) all->par.physbase = sdev->reg_addrs[2].phys_addr; sbusfb_fill_var(&all->info.var, sdev->prom_node, 8); + all->info.var.red.length = 8; + all->info.var.green.length = 8; + all->info.var.blue.length = 8; linebytes = prom_getintdefault(sdev->prom_node, "linebytes", all->info.var.xres); @@ -323,6 +326,7 @@ static void p9100_init_one(struct sbus_dev *sdev) kfree(all); return; } + fb_set_cmap(&all->info.cmap, &all->info); list_add(&all->list, &p9100_list); -- cgit v0.10.2 From ba6399334dd8a75bd295de26496196c720abae0a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 7 Oct 2005 13:30:49 -0700 Subject: [SPARC64]: Fix userland FPU state corruption. We need to use stricter memory barriers around the block load and store instructions we use to save and restore the FPU register file. Signed-off-by: David S. Miller diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index f685035dbd..11a8484 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -33,7 +33,7 @@ /* This is trivial with the new code... */ .globl do_fpdis do_fpdis: - sethi %hi(TSTATE_PEF), %g4 ! IEU0 + sethi %hi(TSTATE_PEF), %g4 rdpr %tstate, %g5 andcc %g5, %g4, %g0 be,pt %xcc, 1f @@ -50,18 +50,18 @@ do_fpdis: add %g0, %g0, %g0 ba,a,pt %xcc, rtrap_clr_l6 -1: ldub [%g6 + TI_FPSAVED], %g5 ! Load Group - wr %g0, FPRS_FEF, %fprs ! LSU Group+4bubbles - andcc %g5, FPRS_FEF, %g0 ! IEU1 Group - be,a,pt %icc, 1f ! CTI - clr %g7 ! IEU0 - ldx [%g6 + TI_GSR], %g7 ! Load Group -1: andcc %g5, FPRS_DL, %g0 ! IEU1 - bne,pn %icc, 2f ! CTI - fzero %f0 ! FPA - andcc %g5, FPRS_DU, %g0 ! IEU1 Group - bne,pn %icc, 1f ! CTI - fzero %f2 ! FPA +1: ldub [%g6 + TI_FPSAVED], %g5 + wr %g0, FPRS_FEF, %fprs + andcc %g5, FPRS_FEF, %g0 + be,a,pt %icc, 1f + clr %g7 + ldx [%g6 + TI_GSR], %g7 +1: andcc %g5, FPRS_DL, %g0 + bne,pn %icc, 2f + fzero %f0 + andcc %g5, FPRS_DU, %g0 + bne,pn %icc, 1f + fzero %f2 faddd %f0, %f2, %f4 fmuld %f0, %f2, %f6 faddd %f0, %f2, %f8 @@ -104,8 +104,10 @@ do_fpdis: add %g6, TI_FPREGS + 0xc0, %g2 faddd %f0, %f2, %f8 fmuld %f0, %f2, %f10 - ldda [%g1] ASI_BLK_S, %f32 ! grrr, where is ASI_BLK_NUCLEUS 8-( + membar #Sync + ldda [%g1] ASI_BLK_S, %f32 ldda [%g2] ASI_BLK_S, %f48 + membar #Sync faddd %f0, %f2, %f12 fmuld %f0, %f2, %f14 faddd %f0, %f2, %f16 @@ -116,7 +118,6 @@ do_fpdis: fmuld %f0, %f2, %f26 faddd %f0, %f2, %f28 fmuld %f0, %f2, %f30 - membar #Sync b,pt %xcc, fpdis_exit nop 2: andcc %g5, FPRS_DU, %g0 @@ -133,8 +134,10 @@ do_fpdis: add %g6, TI_FPREGS + 0x40, %g2 faddd %f32, %f34, %f36 fmuld %f32, %f34, %f38 - ldda [%g1] ASI_BLK_S, %f0 ! grrr, where is ASI_BLK_NUCLEUS 8-( + membar #Sync + ldda [%g1] ASI_BLK_S, %f0 ldda [%g2] ASI_BLK_S, %f16 + membar #Sync faddd %f32, %f34, %f40 fmuld %f32, %f34, %f42 faddd %f32, %f34, %f44 @@ -147,7 +150,6 @@ do_fpdis: fmuld %f32, %f34, %f58 faddd %f32, %f34, %f60 fmuld %f32, %f34, %f62 - membar #Sync ba,pt %xcc, fpdis_exit nop 3: mov SECONDARY_CONTEXT, %g3 @@ -158,7 +160,8 @@ do_fpdis: stxa %g2, [%g3] ASI_DMMU membar #Sync mov 0x40, %g2 - ldda [%g1] ASI_BLK_S, %f0 ! grrr, where is ASI_BLK_NUCLEUS 8-( + membar #Sync + ldda [%g1] ASI_BLK_S, %f0 ldda [%g1 + %g2] ASI_BLK_S, %f16 add %g1, 0x80, %g1 ldda [%g1] ASI_BLK_S, %f32 diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S index ecfb42a..090dcca 100644 --- a/arch/sparc64/kernel/rtrap.S +++ b/arch/sparc64/kernel/rtrap.S @@ -312,32 +312,33 @@ kern_fpucheck: ldub [%g6 + TI_FPDEPTH], %l5 wr %g1, FPRS_FEF, %fprs ldx [%o1 + %o5], %g1 add %g6, TI_XFSR, %o1 - membar #StoreLoad | #LoadLoad sll %o0, 8, %o2 add %g6, TI_FPREGS, %o3 brz,pn %l6, 1f add %g6, TI_FPREGS+0x40, %o4 + membar #Sync ldda [%o3 + %o2] ASI_BLK_P, %f0 ldda [%o4 + %o2] ASI_BLK_P, %f16 + membar #Sync 1: andcc %l2, FPRS_DU, %g0 be,pn %icc, 1f wr %g1, 0, %gsr add %o2, 0x80, %o2 + membar #Sync ldda [%o3 + %o2] ASI_BLK_P, %f32 ldda [%o4 + %o2] ASI_BLK_P, %f48 - 1: membar #Sync ldx [%o1 + %o5], %fsr 2: stb %l5, [%g6 + TI_FPDEPTH] ba,pt %xcc, rt_continue nop 5: wr %g0, FPRS_FEF, %fprs - membar #StoreLoad | #LoadLoad sll %o0, 8, %o2 add %g6, TI_FPREGS+0x80, %o3 add %g6, TI_FPREGS+0xc0, %o4 + membar #Sync ldda [%o3 + %o2] ASI_BLK_P, %f32 ldda [%o4 + %o2] ASI_BLK_P, %f48 membar #Sync diff --git a/arch/sparc64/lib/VISsave.S b/arch/sparc64/lib/VISsave.S index 4e18989..a0ded5c 100644 --- a/arch/sparc64/lib/VISsave.S +++ b/arch/sparc64/lib/VISsave.S @@ -59,15 +59,17 @@ vis1: ldub [%g6 + TI_FPSAVED], %g3 be,pn %icc, 9b add %g6, TI_FPREGS, %g2 andcc %o5, FPRS_DL, %g0 - membar #StoreStore | #LoadStore be,pn %icc, 4f add %g6, TI_FPREGS+0x40, %g3 + membar #Sync stda %f0, [%g2 + %g1] ASI_BLK_P stda %f16, [%g3 + %g1] ASI_BLK_P + membar #Sync andcc %o5, FPRS_DU, %g0 be,pn %icc, 5f 4: add %g1, 128, %g1 + membar #Sync stda %f32, [%g2 + %g1] ASI_BLK_P stda %f48, [%g3 + %g1] ASI_BLK_P @@ -87,7 +89,7 @@ vis1: ldub [%g6 + TI_FPSAVED], %g3 sll %g1, 5, %g1 add %g6, TI_FPREGS+0xc0, %g3 wr %g0, FPRS_FEF, %fprs - membar #StoreStore | #LoadStore + membar #Sync stda %f32, [%g2 + %g1] ASI_BLK_P stda %f48, [%g3 + %g1] ASI_BLK_P membar #Sync @@ -128,8 +130,8 @@ VISenterhalf: be,pn %icc, 4f add %g6, TI_FPREGS, %g2 - membar #StoreStore | #LoadStore add %g6, TI_FPREGS+0x40, %g3 + membar #Sync stda %f0, [%g2 + %g1] ASI_BLK_P stda %f16, [%g3 + %g1] ASI_BLK_P membar #Sync -- cgit v0.10.2 From 4f55cd105c38af4aa157804729d694f864fbc78a Mon Sep 17 00:00:00 2001 From: Jean-Denis Boyer Date: Fri, 7 Oct 2005 13:44:35 -0700 Subject: [ATM]: [br2684] if we free the skb, we should return 0 From: "Jean-Denis Boyer" Signed-off-by: Chas Williams Signed-off-by: David S. Miller diff --git a/net/atm/br2684.c b/net/atm/br2684.c index 289956c..72f3f7b 100644 --- a/net/atm/br2684.c +++ b/net/atm/br2684.c @@ -220,7 +220,7 @@ static int br2684_start_xmit(struct sk_buff *skb, struct net_device *dev) /* netif_stop_queue(dev); */ dev_kfree_skb(skb); read_unlock(&devs_lock); - return -EUNATCH; + return 0; } if (!br2684_xmit_vcc(skb, brdev, brvcc)) { /* -- cgit v0.10.2 From 788e05a67c343fa22f2ae1d3ca264e7f15c25eaf Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 7 Oct 2005 17:46:19 +0400 Subject: [PATCH] fix do_coredump() vs SIGSTOP race Let's suppose we have 2 threads in thread group: A - does coredump B - has pending SIGSTOP thread A thread B do_coredump: get_signal_to_deliver: lock(->sighand) ->signal->flags = SIGNAL_GROUP_EXIT unlock(->sighand) lock(->sighand) signr = dequeue_signal() ->signal->flags |= SIGNAL_STOP_DEQUEUED return SIGSTOP; do_signal_stop: unlock(->sighand) coredump_wait: zap_threads: lock(tasklist_lock) send SIGKILL to B // signal_wake_up() does nothing unlock(tasklist_lock) lock(tasklist_lock) lock(->sighand) re-check sig->flags & SIGNAL_STOP_DEQUEUED, yes set_current_state(TASK_STOPPED); finish_stop: schedule(); // ->state == TASK_STOPPED wait_for_completion(&startup_done) // waits for complete() from B, // ->state == TASK_UNINTERRUPTIBLE We can't wake up 'B' in any way: SIGCONT will be ignored because handle_stop_signal() sees ->signal->flags & SIGNAL_GROUP_EXIT. sys_kill(SIGKILL)->__group_complete_signal() will choose uninterruptible 'A', so it can't help. sys_tkill(B, SIGKILL) will be ignored by specific_send_sig_info() because B already has pending SIGKILL. This scenario is not possbile if 'A' does do_group_exit(), because it sets sig->flags = SIGNAL_GROUP_EXIT and delivers SIGKILL to subthreads atomically, holding both tasklist_lock and sighand->lock. That means that do_signal_stop() will notice !SIGNAL_STOP_DEQUEUED after re-locking ->sighand. And it is not possible to any other thread to re-add SIGNAL_STOP_DEQUEUED later, because dequeue_signal() can only return SIGKILL. I think it is better to change do_coredump() to do sigaddset(SIGKILL) and signal_wake_up() under sighand->lock, but this patch is much simpler. Signed-off-by: Oleg Nesterov Signed-off-by: Linus Torvalds diff --git a/kernel/signal.c b/kernel/signal.c index 619b027..c135f5a 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -578,7 +578,8 @@ int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info) * is to alert stop-signal processing code when another * processor has come along and cleared the flag. */ - tsk->signal->flags |= SIGNAL_STOP_DEQUEUED; + if (!(tsk->signal->flags & SIGNAL_GROUP_EXIT)) + tsk->signal->flags |= SIGNAL_STOP_DEQUEUED; } if ( signr && ((info->si_code & __SI_MASK) == __SI_TIMER) && -- cgit v0.10.2 From c2059b2e0b209a0674c21f78337bb158d3ccb22b Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Fri, 7 Oct 2005 14:43:22 +0100 Subject: [PATCH] yenta: fix build if YENTA && !CARDBUS (struct pcmcia_socket).tune_bridge only exists if CONFIG_CARDBUS is set but building yenta_socket without CardBus is valid. Signed-off-by: David Vrabel Signed-off-by: Linus Torvalds diff --git a/drivers/pcmcia/ti113x.h b/drivers/pcmcia/ti113x.h index da0b404..539b5cd 100644 --- a/drivers/pcmcia/ti113x.h +++ b/drivers/pcmcia/ti113x.h @@ -873,6 +873,7 @@ static int ti1250_override(struct yenta_socket *socket) * Some fixup code to make everybody happy (TM). */ +#ifdef CONFIG_CARDBUS /** * set/clear various test bits: * Defaults to clear the bit. @@ -927,7 +928,6 @@ static void ene_tune_bridge(struct pcmcia_socket *sock, struct pci_bus *bus) config_writeb(socket, ENE_TEST_C9, test_c9); } - static int ene_override(struct yenta_socket *socket) { /* install tune_bridge() function */ @@ -935,6 +935,9 @@ static int ene_override(struct yenta_socket *socket) return ti1250_override(socket); } +#else +# define ene_override ti1250_override +#endif #endif /* _LINUX_TI113X_H */ -- cgit v0.10.2 From 74fd92c511bd4a0771ac0faaaef38bb1be3a29f6 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 7 Oct 2005 15:01:09 +0100 Subject: [PATCH] key: plug request_key_auth memleak Plug request_key_auth memleak. This can be triggered by unprivileged users, so is local DoS. Signed-off-by: Chris Wright Signed-Off-By: David Howells Signed-off-by: Linus Torvalds diff --git a/security/keys/request_key_auth.c b/security/keys/request_key_auth.c index 1ecd3d3..f80a501 100644 --- a/security/keys/request_key_auth.c +++ b/security/keys/request_key_auth.c @@ -96,6 +96,7 @@ static void request_key_auth_destroy(struct key *key) kenter("{%d}", key->serial); key_put(rka->target_key); + kfree(rka); } /* end request_key_auth_destroy() */ -- cgit v0.10.2 From f1a9badcf6ecad9975240d94514721cb93932151 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 7 Oct 2005 15:04:52 +0100 Subject: [PATCH] Keys: Add request-key process documentation The attached patch adds documentation for the process by which request-key works, including how it permits helper processes to gain access to the requestor's keyrings. Signed-Off-By: David Howells Signed-off-by: Linus Torvalds diff --git a/Documentation/keys-request-key.txt b/Documentation/keys-request-key.txt new file mode 100644 index 0000000..5f2b9c5 --- /dev/null +++ b/Documentation/keys-request-key.txt @@ -0,0 +1,161 @@ + =================== + KEY REQUEST SERVICE + =================== + +The key request service is part of the key retention service (refer to +Documentation/keys.txt). This document explains more fully how that the +requesting algorithm works. + +The process starts by either the kernel requesting a service by calling +request_key(): + + struct key *request_key(const struct key_type *type, + const char *description, + const char *callout_string); + +Or by userspace invoking the request_key system call: + + key_serial_t request_key(const char *type, + const char *description, + const char *callout_info, + key_serial_t dest_keyring); + +The main difference between the two access points is that the in-kernel +interface does not need to link the key to a keyring to prevent it from being +immediately destroyed. The kernel interface returns a pointer directly to the +key, and it's up to the caller to destroy the key. + +The userspace interface links the key to a keyring associated with the process +to prevent the key from going away, and returns the serial number of the key to +the caller. + + +=========== +THE PROCESS +=========== + +A request proceeds in the following manner: + + (1) Process A calls request_key() [the userspace syscall calls the kernel + interface]. + + (2) request_key() searches the process's subscribed keyrings to see if there's + a suitable key there. If there is, it returns the key. If there isn't, and + callout_info is not set, an error is returned. Otherwise the process + proceeds to the next step. + + (3) request_key() sees that A doesn't have the desired key yet, so it creates + two things: + + (a) An uninstantiated key U of requested type and description. + + (b) An authorisation key V that refers to key U and notes that process A + is the context in which key U should be instantiated and secured, and + from which associated key requests may be satisfied. + + (4) request_key() then forks and executes /sbin/request-key with a new session + keyring that contains a link to auth key V. + + (5) /sbin/request-key execs an appropriate program to perform the actual + instantiation. + + (6) The program may want to access another key from A's context (say a + Kerberos TGT key). It just requests the appropriate key, and the keyring + search notes that the session keyring has auth key V in its bottom level. + + This will permit it to then search the keyrings of process A with the + UID, GID, groups and security info of process A as if it was process A, + and come up with key W. + + (7) The program then does what it must to get the data with which to + instantiate key U, using key W as a reference (perhaps it contacts a + Kerberos server using the TGT) and then instantiates key U. + + (8) Upon instantiating key U, auth key V is automatically revoked so that it + may not be used again. + + (9) The program then exits 0 and request_key() deletes key V and returns key + U to the caller. + +This also extends further. If key W (step 5 above) didn't exist, key W would be +created uninstantiated, another auth key (X) would be created [as per step 3] +and another copy of /sbin/request-key spawned [as per step 4]; but the context +specified by auth key X will still be process A, as it was in auth key V. + +This is because process A's keyrings can't simply be attached to +/sbin/request-key at the appropriate places because (a) execve will discard two +of them, and (b) it requires the same UID/GID/Groups all the way through. + + +====================== +NEGATIVE INSTANTIATION +====================== + +Rather than instantiating a key, it is possible for the possessor of an +authorisation key to negatively instantiate a key that's under construction. +This is a short duration placeholder that causes any attempt at re-requesting +the key whilst it exists to fail with error ENOKEY. + +This is provided to prevent excessive repeated spawning of /sbin/request-key +processes for a key that will never be obtainable. + +Should the /sbin/request-key process exit anything other than 0 or die on a +signal, the key under construction will be automatically negatively +instantiated for a short amount of time. + + +==================== +THE SEARCH ALGORITHM +==================== + +A search of any particular keyring proceeds in the following fashion: + + (1) When the key management code searches for a key (keyring_search_aux) it + firstly calls key_permission(SEARCH) on the keyring it's starting with, + if this denies permission, it doesn't search further. + + (2) It considers all the non-keyring keys within that keyring and, if any key + matches the criteria specified, calls key_permission(SEARCH) on it to see + if the key is allowed to be found. If it is, that key is returned; if + not, the search continues, and the error code is retained if of higher + priority than the one currently set. + + (3) It then considers all the keyring-type keys in the keyring it's currently + searching. It calls key_permission(SEARCH) on each keyring, and if this + grants permission, it recurses, executing steps (2) and (3) on that + keyring. + +The process stops immediately a valid key is found with permission granted to +use it. Any error from a previous match attempt is discarded and the key is +returned. + +When search_process_keyrings() is invoked, it performs the following searches +until one succeeds: + + (1) If extant, the process's thread keyring is searched. + + (2) If extant, the process's process keyring is searched. + + (3) The process's session keyring is searched. + + (4) If the process has a request_key() authorisation key in its session + keyring then: + + (a) If extant, the calling process's thread keyring is searched. + + (b) If extant, the calling process's process keyring is searched. + + (c) The calling process's session keyring is searched. + +The moment one succeeds, all pending errors are discarded and the found key is +returned. + +Only if all these fail does the whole thing fail with the highest priority +error. Note that several errors may have come from LSM. + +The error priority is: + + EKEYREVOKED > EKEYEXPIRED > ENOKEY + +EACCES/EPERM are only returned on a direct search of a specific keyring where +the basal keyring does not grant Search permission. diff --git a/Documentation/keys.txt b/Documentation/keys.txt index b22e7c8..4afe03a 100644 --- a/Documentation/keys.txt +++ b/Documentation/keys.txt @@ -361,6 +361,8 @@ The main syscalls are: /sbin/request-key will be invoked in an attempt to obtain a key. The callout_info string will be passed as an argument to the program. + See also Documentation/keys-request-key.txt. + The keyctl syscall functions are: @@ -533,8 +535,8 @@ The keyctl syscall functions are: (*) Read the payload data from a key: - key_serial_t keyctl(KEYCTL_READ, key_serial_t keyring, char *buffer, - size_t buflen); + long keyctl(KEYCTL_READ, key_serial_t keyring, char *buffer, + size_t buflen); This function attempts to read the payload data from the specified key into the buffer. The process must have read permission on the key to @@ -555,9 +557,9 @@ The keyctl syscall functions are: (*) Instantiate a partially constructed key. - key_serial_t keyctl(KEYCTL_INSTANTIATE, key_serial_t key, - const void *payload, size_t plen, - key_serial_t keyring); + long keyctl(KEYCTL_INSTANTIATE, key_serial_t key, + const void *payload, size_t plen, + key_serial_t keyring); If the kernel calls back to userspace to complete the instantiation of a key, userspace should use this call to supply data for the key before the @@ -576,8 +578,8 @@ The keyctl syscall functions are: (*) Negatively instantiate a partially constructed key. - key_serial_t keyctl(KEYCTL_NEGATE, key_serial_t key, - unsigned timeout, key_serial_t keyring); + long keyctl(KEYCTL_NEGATE, key_serial_t key, + unsigned timeout, key_serial_t keyring); If the kernel calls back to userspace to complete the instantiation of a key, userspace should use this call mark the key as negative before the @@ -688,6 +690,8 @@ payload contents" for more information. If successful, the key will have been attached to the default keyring for implicitly obtained request-key keys, as set by KEYCTL_SET_REQKEY_KEYRING. + See also Documentation/keys-request-key.txt. + (*) When it is no longer required, the key should be released using: diff --git a/security/keys/request_key.c b/security/keys/request_key.c index e6dd366..5cc4bba 100644 --- a/security/keys/request_key.c +++ b/security/keys/request_key.c @@ -7,6 +7,8 @@ * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. + * + * See Documentation/keys-request-key.txt */ #include diff --git a/security/keys/request_key_auth.c b/security/keys/request_key_auth.c index f80a501..a8e4069 100644 --- a/security/keys/request_key_auth.c +++ b/security/keys/request_key_auth.c @@ -7,6 +7,8 @@ * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. + * + * See Documentation/keys-request-key.txt */ #include -- cgit v0.10.2 From 468ed2b0c85ec4310b429e60358213b6d077289e Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 7 Oct 2005 15:07:38 +0100 Subject: [PATCH] Keys: Split key permissions checking into a .c file The attached patch splits key permissions checking out of key-ui.h and moves it into a .c file. It's quite large and called quite a lot, and it's about to get bigger with the addition of LSM support for keys... key_any_permission() is also discarded as it's no longer used. Signed-Off-By: David Howells Signed-off-by: Linus Torvalds diff --git a/include/linux/key-ui.h b/include/linux/key-ui.h index 918c34a..7a2e332 100644 --- a/include/linux/key-ui.h +++ b/include/linux/key-ui.h @@ -38,97 +38,16 @@ struct keyring_list { struct key *keys[0]; }; - /* * check to see whether permission is granted to use a key in the desired way */ -static inline int key_permission(const key_ref_t key_ref, key_perm_t perm) -{ - struct key *key = key_ref_to_ptr(key_ref); - key_perm_t kperm; - - if (is_key_possessed(key_ref)) - kperm = key->perm >> 24; - else if (key->uid == current->fsuid) - kperm = key->perm >> 16; - else if (key->gid != -1 && - key->perm & KEY_GRP_ALL && - in_group_p(key->gid) - ) - kperm = key->perm >> 8; - else - kperm = key->perm; - - kperm = kperm & perm & KEY_ALL; - - return kperm == perm; -} - -/* - * check to see whether permission is granted to use a key in at least one of - * the desired ways - */ -static inline int key_any_permission(const key_ref_t key_ref, key_perm_t perm) -{ - struct key *key = key_ref_to_ptr(key_ref); - key_perm_t kperm; - - if (is_key_possessed(key_ref)) - kperm = key->perm >> 24; - else if (key->uid == current->fsuid) - kperm = key->perm >> 16; - else if (key->gid != -1 && - key->perm & KEY_GRP_ALL && - in_group_p(key->gid) - ) - kperm = key->perm >> 8; - else - kperm = key->perm; +extern int key_task_permission(const key_ref_t key_ref, + struct task_struct *context, + key_perm_t perm); - kperm = kperm & perm & KEY_ALL; - - return kperm != 0; -} - -static inline int key_task_groups_search(struct task_struct *tsk, gid_t gid) -{ - int ret; - - task_lock(tsk); - ret = groups_search(tsk->group_info, gid); - task_unlock(tsk); - return ret; -} - -static inline int key_task_permission(const key_ref_t key_ref, - struct task_struct *context, - key_perm_t perm) +static inline int key_permission(const key_ref_t key_ref, key_perm_t perm) { - struct key *key = key_ref_to_ptr(key_ref); - key_perm_t kperm; - - if (is_key_possessed(key_ref)) { - kperm = key->perm >> 24; - } - else if (key->uid == context->fsuid) { - kperm = key->perm >> 16; - } - else if (key->gid != -1 && - key->perm & KEY_GRP_ALL && ( - key->gid == context->fsgid || - key_task_groups_search(context, key->gid) - ) - ) { - kperm = key->perm >> 8; - } - else { - kperm = key->perm; - } - - kperm = kperm & perm & KEY_ALL; - - return kperm == perm; - + return key_task_permission(key_ref, current, perm); } extern key_ref_t lookup_user_key(struct task_struct *context, diff --git a/security/keys/Makefile b/security/keys/Makefile index c392d75..5145adf 100644 --- a/security/keys/Makefile +++ b/security/keys/Makefile @@ -6,6 +6,7 @@ obj-y := \ key.o \ keyring.o \ keyctl.o \ + permission.o \ process_keys.o \ request_key.o \ request_key_auth.o \ diff --git a/security/keys/permission.c b/security/keys/permission.c new file mode 100644 index 0000000..1c36516 --- /dev/null +++ b/security/keys/permission.c @@ -0,0 +1,70 @@ +/* permission.c: key permission determination + * + * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include "internal.h" + +/*****************************************************************************/ +/* + * check to see whether permission is granted to use a key in the desired way, + * but permit the security modules to override + */ +int key_task_permission(const key_ref_t key_ref, + struct task_struct *context, + key_perm_t perm) +{ + struct key *key; + key_perm_t kperm; + int ret; + + key = key_ref_to_ptr(key_ref); + + /* use the top 8-bits of permissions for keys the caller possesses */ + if (is_key_possessed(key_ref)) { + kperm = key->perm >> 24; + goto use_these_perms; + } + + /* use the second 8-bits of permissions for keys the caller owns */ + if (key->uid == context->fsuid) { + kperm = key->perm >> 16; + goto use_these_perms; + } + + /* use the third 8-bits of permissions for keys the caller has a group + * membership in common with */ + if (key->gid != -1 && key->perm & KEY_GRP_ALL) { + if (key->gid == context->fsgid) { + kperm = key->perm >> 8; + goto use_these_perms; + } + + task_lock(context); + ret = groups_search(context->group_info, key->gid); + task_unlock(context); + + if (ret) { + kperm = key->perm >> 8; + goto use_these_perms; + } + } + + /* otherwise use the least-significant 8-bits */ + kperm = key->perm; + +use_these_perms: + kperm = kperm & perm & KEY_ALL; + + return kperm == perm; + +} /* end key_task_permission() */ + +EXPORT_SYMBOL(key_task_permission); -- cgit v0.10.2 From 7ab501db8cb6659efdf04034e0de6b44c059a51b Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 7 Oct 2005 16:41:24 +0100 Subject: [PATCH] Keys: Possessor permissions should be additive This patch makes the possessor permissions on a key additive with user/group/other permissions on the same key. This permits extra rights to be granted to the possessor of a key without taking away any rights conferred by them owning the key or having common group membership. Signed-Off-By: David Howells Signed-off-by: Linus Torvalds diff --git a/security/keys/permission.c b/security/keys/permission.c index 1c36516..03db073 100644 --- a/security/keys/permission.c +++ b/security/keys/permission.c @@ -27,12 +27,6 @@ int key_task_permission(const key_ref_t key_ref, key = key_ref_to_ptr(key_ref); - /* use the top 8-bits of permissions for keys the caller possesses */ - if (is_key_possessed(key_ref)) { - kperm = key->perm >> 24; - goto use_these_perms; - } - /* use the second 8-bits of permissions for keys the caller owns */ if (key->uid == context->fsuid) { kperm = key->perm >> 16; @@ -61,6 +55,12 @@ int key_task_permission(const key_ref_t key_ref, kperm = key->perm; use_these_perms: + /* use the top 8-bits of permissions for keys the caller possesses + * - possessor permissions are additive with other permissions + */ + if (is_key_possessed(key_ref)) + kperm |= key->perm >> 24; + kperm = kperm & perm & KEY_ALL; return kperm == perm; -- cgit v0.10.2 From 3b0e77bd144203a507eb191f7117d2c5004ea1de Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 7 Oct 2005 19:41:34 +0200 Subject: [PATCH] scsi_ioctl: only warn for rejected commands We should not be warning about commands that we allow, even if they are unknown. So move the if-root-allow check up a notch. Signed-off-by: Jens Axboe Signed-off-by: Linus Torvalds diff --git a/drivers/block/scsi_ioctl.c b/drivers/block/scsi_ioctl.c index 079ec34..382dea7 100644 --- a/drivers/block/scsi_ioctl.c +++ b/drivers/block/scsi_ioctl.c @@ -201,15 +201,15 @@ static int verify_command(struct file *file, unsigned char *cmd) return 0; } + /* And root can do any command.. */ + if (capable(CAP_SYS_RAWIO)) + return 0; + if (!type) { cmd_type[cmd[0]] = CMD_WARNED; printk(KERN_WARNING "scsi: unknown opcode 0x%02x\n", cmd[0]); } - /* And root can do any command.. */ - if (capable(CAP_SYS_RAWIO)) - return 0; - /* Otherwise fail it with an "Operation not permitted" */ return -EPERM; } -- cgit v0.10.2 From dd0fc66fb33cd610bc1a5db8a5e232d34879b4d7 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 7 Oct 2005 07:46:04 +0100 Subject: [PATCH] gfp flags annotations - part 1 - added typedef unsigned int __nocast gfp_t; - replaced __nocast uses for gfp flags with gfp_t - it gives exactly the same warnings as far as sparse is concerned, doesn't change generated code (from gcc point of view we replaced unsigned int with typedef) and documents what's going on far better. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds diff --git a/arch/cris/arch-v32/drivers/pci/dma.c b/arch/cris/arch-v32/drivers/pci/dma.c index 1032930..426b098 100644 --- a/arch/cris/arch-v32/drivers/pci/dma.c +++ b/arch/cris/arch-v32/drivers/pci/dma.c @@ -24,7 +24,7 @@ struct dma_coherent_mem { }; void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, unsigned int __nocast gfp) + dma_addr_t *dma_handle, gfp_t gfp) { void *ret; struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL; diff --git a/arch/i386/kernel/pci-dma.c b/arch/i386/kernel/pci-dma.c index 1e51427..25fe668 100644 --- a/arch/i386/kernel/pci-dma.c +++ b/arch/i386/kernel/pci-dma.c @@ -23,7 +23,7 @@ struct dma_coherent_mem { }; void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, unsigned int __nocast gfp) + dma_addr_t *dma_handle, gfp_t gfp) { void *ret; struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL; diff --git a/arch/ppc64/kernel/bpa_iommu.c b/arch/ppc64/kernel/bpa_iommu.c index 507eb9d..5f24600 100644 --- a/arch/ppc64/kernel/bpa_iommu.c +++ b/arch/ppc64/kernel/bpa_iommu.c @@ -310,7 +310,7 @@ static void bpa_map_iommu(void) static void *bpa_alloc_coherent(struct device *hwdev, size_t size, - dma_addr_t *dma_handle, unsigned int __nocast flag) + dma_addr_t *dma_handle, gfp_t flag) { void *ret; diff --git a/arch/ppc64/kernel/dma.c b/arch/ppc64/kernel/dma.c index 4da8e31..7c34196 100644 --- a/arch/ppc64/kernel/dma.c +++ b/arch/ppc64/kernel/dma.c @@ -53,7 +53,7 @@ int dma_set_mask(struct device *dev, u64 dma_mask) EXPORT_SYMBOL(dma_set_mask); void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, unsigned int __nocast flag) + dma_addr_t *dma_handle, gfp_t flag) { struct dma_mapping_ops *dma_ops = get_dma_ops(dev); diff --git a/arch/ppc64/kernel/iommu.c b/arch/ppc64/kernel/iommu.c index 9032b6b..4d9b438 100644 --- a/arch/ppc64/kernel/iommu.c +++ b/arch/ppc64/kernel/iommu.c @@ -519,7 +519,7 @@ void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle, * to the dma address (mapping) of the first page. */ void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size, - dma_addr_t *dma_handle, unsigned int __nocast flag) + dma_addr_t *dma_handle, gfp_t flag) { void *ret = NULL; dma_addr_t mapping; diff --git a/arch/ppc64/kernel/pci_direct_iommu.c b/arch/ppc64/kernel/pci_direct_iommu.c index b8f7f58..54055c8 100644 --- a/arch/ppc64/kernel/pci_direct_iommu.c +++ b/arch/ppc64/kernel/pci_direct_iommu.c @@ -31,7 +31,7 @@ #include "pci.h" static void *pci_direct_alloc_coherent(struct device *hwdev, size_t size, - dma_addr_t *dma_handle, unsigned int __nocast flag) + dma_addr_t *dma_handle, gfp_t flag) { void *ret; diff --git a/arch/ppc64/kernel/pci_iommu.c b/arch/ppc64/kernel/pci_iommu.c index 14647e0..d9e33b7 100644 --- a/arch/ppc64/kernel/pci_iommu.c +++ b/arch/ppc64/kernel/pci_iommu.c @@ -76,7 +76,7 @@ static inline struct iommu_table *devnode_table(struct device *dev) * to the dma address (mapping) of the first page. */ static void *pci_iommu_alloc_coherent(struct device *hwdev, size_t size, - dma_addr_t *dma_handle, unsigned int __nocast flag) + dma_addr_t *dma_handle, gfp_t flag) { return iommu_alloc_coherent(devnode_table(hwdev), size, dma_handle, flag); diff --git a/arch/ppc64/kernel/vio.c b/arch/ppc64/kernel/vio.c index c90e1dd..0e555b7 100644 --- a/arch/ppc64/kernel/vio.c +++ b/arch/ppc64/kernel/vio.c @@ -218,7 +218,7 @@ static void vio_unmap_sg(struct device *dev, struct scatterlist *sglist, } static void *vio_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, unsigned int __nocast flag) + dma_addr_t *dma_handle, gfp_t flag) { return iommu_alloc_coherent(to_vio_dev(dev)->iommu_table, size, dma_handle, flag); diff --git a/drivers/atm/ambassador.c b/drivers/atm/ambassador.c index d74a7c5..4b6bf19c 100644 --- a/drivers/atm/ambassador.c +++ b/drivers/atm/ambassador.c @@ -795,7 +795,7 @@ static void drain_rx_pools (amb_dev * dev) { } static inline void fill_rx_pool (amb_dev * dev, unsigned char pool, - unsigned int __nocast priority) + gfp_t priority) { rx_in rx; amb_rxq * rxq; diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c index 5821974..7f7ec28 100644 --- a/drivers/atm/firestream.c +++ b/drivers/atm/firestream.c @@ -1374,8 +1374,7 @@ static void reset_chip (struct fs_dev *dev) } } -static void __devinit *aligned_kmalloc (int size, unsigned int __nocast flags, - int alignment) +static void __devinit *aligned_kmalloc (int size, gfp_t flags, int alignment) { void *t; @@ -1466,7 +1465,7 @@ static inline int nr_buffers_in_freepool (struct fs_dev *dev, struct freepool *f working again after that... -- REW */ static void top_off_fp (struct fs_dev *dev, struct freepool *fp, - unsigned int __nocast gfp_flags) + gfp_t gfp_flags) { struct FS_BPENTRY *qe, *ne; struct sk_buff *skb; diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c index 6f1a83c..14f6a62 100644 --- a/drivers/atm/fore200e.c +++ b/drivers/atm/fore200e.c @@ -178,7 +178,7 @@ fore200e_irq_itoa(int irq) static void* -fore200e_kmalloc(int size, unsigned int __nocast flags) +fore200e_kmalloc(int size, gfp_t flags) { void *chunk = kzalloc(size, flags); diff --git a/drivers/base/dmapool.c b/drivers/base/dmapool.c index 60a7ef6..e2f64f9 100644 --- a/drivers/base/dmapool.c +++ b/drivers/base/dmapool.c @@ -156,7 +156,7 @@ dma_pool_create (const char *name, struct device *dev, static struct dma_page * -pool_alloc_page (struct dma_pool *pool, unsigned int __nocast mem_flags) +pool_alloc_page (struct dma_pool *pool, gfp_t mem_flags) { struct dma_page *page; int mapsize; @@ -262,8 +262,7 @@ dma_pool_destroy (struct dma_pool *pool) * If such a memory block can't be allocated, null is returned. */ void * -dma_pool_alloc (struct dma_pool *pool, unsigned int __nocast mem_flags, - dma_addr_t *handle) +dma_pool_alloc (struct dma_pool *pool, gfp_t mem_flags, dma_addr_t *handle) { unsigned long flags; struct dma_page *page; diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index 7e22a58..a280e67 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -229,7 +229,7 @@ static int pkt_grow_pktlist(struct pktcdvd_device *pd, int nr_packets) return 1; } -static void *pkt_rb_alloc(unsigned int __nocast gfp_mask, void *data) +static void *pkt_rb_alloc(gfp_t gfp_mask, void *data) { return kmalloc(sizeof(struct pkt_rb_node), gfp_mask); } @@ -2082,7 +2082,7 @@ static int pkt_close(struct inode *inode, struct file *file) } -static void *psd_pool_alloc(unsigned int __nocast gfp_mask, void *data) +static void *psd_pool_alloc(gfp_t gfp_mask, void *data) { return kmalloc(sizeof(struct packet_stacked_data), gfp_mask); } diff --git a/drivers/bluetooth/bpa10x.c b/drivers/bluetooth/bpa10x.c index a1bf8f0..4fa8523 100644 --- a/drivers/bluetooth/bpa10x.c +++ b/drivers/bluetooth/bpa10x.c @@ -308,7 +308,7 @@ unlock: } static inline struct urb *bpa10x_alloc_urb(struct usb_device *udev, unsigned int pipe, - size_t size, unsigned int __nocast flags, void *data) + size_t size, gfp_t flags, void *data) { struct urb *urb; struct usb_ctrlrequest *cr; diff --git a/drivers/bluetooth/hci_usb.c b/drivers/bluetooth/hci_usb.c index 57c48bb..6756cb2 100644 --- a/drivers/bluetooth/hci_usb.c +++ b/drivers/bluetooth/hci_usb.c @@ -132,7 +132,7 @@ static struct usb_device_id blacklist_ids[] = { { } /* Terminating entry */ }; -static struct _urb *_urb_alloc(int isoc, unsigned int __nocast gfp) +static struct _urb *_urb_alloc(int isoc, gfp_t gfp) { struct _urb *_urb = kmalloc(sizeof(struct _urb) + sizeof(struct usb_iso_packet_descriptor) * isoc, gfp); diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c index 1422285..505677f 100644 --- a/drivers/connector/connector.c +++ b/drivers/connector/connector.c @@ -69,8 +69,7 @@ int cn_already_initialized = 0; * a new message. * */ -int cn_netlink_send(struct cn_msg *msg, u32 __group, - unsigned int __nocast gfp_mask) +int cn_netlink_send(struct cn_msg *msg, u32 __group, gfp_t gfp_mask) { struct cn_callback_entry *__cbq; unsigned int size; diff --git a/drivers/ieee1394/raw1394.c b/drivers/ieee1394/raw1394.c index 5fe4f2b..315f5ca 100644 --- a/drivers/ieee1394/raw1394.c +++ b/drivers/ieee1394/raw1394.c @@ -98,7 +98,7 @@ static struct hpsb_address_ops arm_ops = { static void queue_complete_cb(struct pending_request *req); -static struct pending_request *__alloc_pending_request(unsigned int __nocast flags) +static struct pending_request *__alloc_pending_request(gfp_t flags) { struct pending_request *req; diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c index a4a4d9c..a14ca87 100644 --- a/drivers/infiniband/core/mad.c +++ b/drivers/infiniband/core/mad.c @@ -783,7 +783,7 @@ struct ib_mad_send_buf * ib_create_send_mad(struct ib_mad_agent *mad_agent, u32 remote_qpn, u16 pkey_index, struct ib_ah *ah, int rmpp_active, int hdr_len, int data_len, - unsigned int __nocast gfp_mask) + gfp_t gfp_mask) { struct ib_mad_agent_private *mad_agent_priv; struct ib_mad_send_buf *send_buf; diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c index 78de2dd..2626182 100644 --- a/drivers/infiniband/core/sa_query.c +++ b/drivers/infiniband/core/sa_query.c @@ -574,7 +574,7 @@ static void ib_sa_path_rec_release(struct ib_sa_query *sa_query) int ib_sa_path_rec_get(struct ib_device *device, u8 port_num, struct ib_sa_path_rec *rec, ib_sa_comp_mask comp_mask, - int timeout_ms, unsigned int __nocast gfp_mask, + int timeout_ms, gfp_t gfp_mask, void (*callback)(int status, struct ib_sa_path_rec *resp, void *context), @@ -676,7 +676,7 @@ static void ib_sa_service_rec_release(struct ib_sa_query *sa_query) int ib_sa_service_rec_query(struct ib_device *device, u8 port_num, u8 method, struct ib_sa_service_rec *rec, ib_sa_comp_mask comp_mask, - int timeout_ms, unsigned int __nocast gfp_mask, + int timeout_ms, gfp_t gfp_mask, void (*callback)(int status, struct ib_sa_service_rec *resp, void *context), @@ -759,7 +759,7 @@ int ib_sa_mcmember_rec_query(struct ib_device *device, u8 port_num, u8 method, struct ib_sa_mcmember_rec *rec, ib_sa_comp_mask comp_mask, - int timeout_ms, unsigned int __nocast gfp_mask, + int timeout_ms, gfp_t gfp_mask, void (*callback)(int status, struct ib_sa_mcmember_rec *resp, void *context), diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index b82bc31..b6148f6 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -96,7 +96,7 @@ static kmem_cache_t *_crypt_io_pool; /* * Mempool alloc and free functions for the page */ -static void *mempool_alloc_page(unsigned int __nocast gfp_mask, void *data) +static void *mempool_alloc_page(gfp_t gfp_mask, void *data) { return alloc_page(gfp_mask); } diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c index 9de0001..4809b20 100644 --- a/drivers/md/dm-io.c +++ b/drivers/md/dm-io.c @@ -32,7 +32,7 @@ struct io { static unsigned _num_ios; static mempool_t *_io_pool; -static void *alloc_io(unsigned int __nocast gfp_mask, void *pool_data) +static void *alloc_io(gfp_t gfp_mask, void *pool_data) { return kmalloc(sizeof(struct io), gfp_mask); } diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index 8632825..2375709 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -122,7 +122,7 @@ static inline sector_t region_to_sector(struct region_hash *rh, region_t region) /* FIXME move this */ static void queue_bio(struct mirror_set *ms, struct bio *bio, int rw); -static void *region_alloc(unsigned int __nocast gfp_mask, void *pool_data) +static void *region_alloc(gfp_t gfp_mask, void *pool_data) { return kmalloc(sizeof(struct region), gfp_mask); } diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c index 2863423..1151c3e 100644 --- a/drivers/md/multipath.c +++ b/drivers/md/multipath.c @@ -38,7 +38,7 @@ static mdk_personality_t multipath_personality; -static void *mp_pool_alloc(unsigned int __nocast gfp_flags, void *data) +static void *mp_pool_alloc(gfp_t gfp_flags, void *data) { struct multipath_bh *mpb; mpb = kmalloc(sizeof(*mpb), gfp_flags); diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index a93ca47..0e1f148 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -52,7 +52,7 @@ static mdk_personality_t raid1_personality; static void unplug_slaves(mddev_t *mddev); -static void * r1bio_pool_alloc(unsigned int __nocast gfp_flags, void *data) +static void * r1bio_pool_alloc(gfp_t gfp_flags, void *data) { struct pool_info *pi = data; r1bio_t *r1_bio; @@ -79,7 +79,7 @@ static void r1bio_pool_free(void *r1_bio, void *data) #define RESYNC_PAGES ((RESYNC_BLOCK_SIZE + PAGE_SIZE-1) / PAGE_SIZE) #define RESYNC_WINDOW (2048*1024) -static void * r1buf_pool_alloc(unsigned int __nocast gfp_flags, void *data) +static void * r1buf_pool_alloc(gfp_t gfp_flags, void *data) { struct pool_info *pi = data; struct page *page; diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 5bd1e9e..28dd028 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -47,7 +47,7 @@ static void unplug_slaves(mddev_t *mddev); -static void * r10bio_pool_alloc(unsigned int __nocast gfp_flags, void *data) +static void * r10bio_pool_alloc(gfp_t gfp_flags, void *data) { conf_t *conf = data; r10bio_t *r10_bio; @@ -81,7 +81,7 @@ static void r10bio_pool_free(void *r10_bio, void *data) * one for write (we recover only one drive per r10buf) * */ -static void * r10buf_pool_alloc(unsigned int __nocast gfp_flags, void *data) +static void * r10buf_pool_alloc(gfp_t gfp_flags, void *data) { conf_t *conf = data; struct page *page; diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index f0a5b77..f264ff1 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1290,7 +1290,7 @@ static void bond_mc_list_destroy(struct bonding *bond) * Copy all the Multicast addresses from src to the bonding device dst */ static int bond_mc_list_copy(struct dev_mc_list *mc_list, struct bonding *bond, - unsigned int __nocast gfp_flag) + gfp_t gfp_flag) { struct dev_mc_list *dmi, *new_dmi; diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c index 83334db..e4811b4 100644 --- a/drivers/net/ns83820.c +++ b/drivers/net/ns83820.c @@ -584,7 +584,7 @@ static inline int ns83820_add_rx_skb(struct ns83820 *dev, struct sk_buff *skb) return 0; } -static inline int rx_refill(struct net_device *ndev, unsigned int __nocast gfp) +static inline int rx_refill(struct net_device *ndev, gfp_t gfp) { struct ns83820 *dev = PRIV(ndev); unsigned i; diff --git a/drivers/net/sungem.h b/drivers/net/sungem.h index 16edbb1..13006d7 100644 --- a/drivers/net/sungem.h +++ b/drivers/net/sungem.h @@ -1036,7 +1036,7 @@ struct gem { #define ALIGNED_RX_SKB_ADDR(addr) \ ((((unsigned long)(addr) + (64UL - 1UL)) & ~(64UL - 1UL)) - (unsigned long)(addr)) static __inline__ struct sk_buff *gem_alloc_skb(int size, - unsigned int __nocast gfp_flags) + gfp_t gfp_flags) { struct sk_buff *skb = alloc_skb(size + 64, gfp_flags); diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index 0b5087f..cab0985 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -833,7 +833,7 @@ zfcp_unit_dequeue(struct zfcp_unit *unit) } static void * -zfcp_mempool_alloc(unsigned int __nocast gfp_mask, void *size) +zfcp_mempool_alloc(gfp_t gfp_mask, void *size) { return kmalloc((size_t) size, gfp_mask); } diff --git a/fs/bio.c b/fs/bio.c index 83a3495..7d81a93 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -75,7 +75,7 @@ struct bio_set { */ static struct bio_set *fs_bio_set; -static inline struct bio_vec *bvec_alloc_bs(unsigned int __nocast gfp_mask, int nr, unsigned long *idx, struct bio_set *bs) +static inline struct bio_vec *bvec_alloc_bs(gfp_t gfp_mask, int nr, unsigned long *idx, struct bio_set *bs) { struct bio_vec *bvl; struct biovec_slab *bp; @@ -155,7 +155,7 @@ inline void bio_init(struct bio *bio) * allocate bio and iovecs from the memory pools specified by the * bio_set structure. **/ -struct bio *bio_alloc_bioset(unsigned int __nocast gfp_mask, int nr_iovecs, struct bio_set *bs) +struct bio *bio_alloc_bioset(gfp_t gfp_mask, int nr_iovecs, struct bio_set *bs) { struct bio *bio = mempool_alloc(bs->bio_pool, gfp_mask); @@ -181,7 +181,7 @@ out: return bio; } -struct bio *bio_alloc(unsigned int __nocast gfp_mask, int nr_iovecs) +struct bio *bio_alloc(gfp_t gfp_mask, int nr_iovecs) { struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, fs_bio_set); @@ -277,7 +277,7 @@ inline void __bio_clone(struct bio *bio, struct bio *bio_src) * * Like __bio_clone, only also allocates the returned bio */ -struct bio *bio_clone(struct bio *bio, unsigned int __nocast gfp_mask) +struct bio *bio_clone(struct bio *bio, gfp_t gfp_mask) { struct bio *b = bio_alloc_bioset(gfp_mask, bio->bi_max_vecs, fs_bio_set); @@ -1078,7 +1078,7 @@ struct bio_pair *bio_split(struct bio *bi, mempool_t *pool, int first_sectors) return bp; } -static void *bio_pair_alloc(unsigned int __nocast gfp_flags, void *data) +static void *bio_pair_alloc(gfp_t gfp_flags, void *data) { return kmalloc(sizeof(struct bio_pair), gfp_flags); } diff --git a/fs/buffer.c b/fs/buffer.c index 6cbfcea..1216c0d 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -3045,7 +3045,7 @@ static void recalc_bh_state(void) buffer_heads_over_limit = (tot > max_buffer_heads); } -struct buffer_head *alloc_buffer_head(unsigned int __nocast gfp_flags) +struct buffer_head *alloc_buffer_head(gfp_t gfp_flags) { struct buffer_head *ret = kmem_cache_alloc(bh_cachep, gfp_flags); if (ret) { diff --git a/fs/mpage.c b/fs/mpage.c index bb9aebe..c5adcdd 100644 --- a/fs/mpage.c +++ b/fs/mpage.c @@ -102,7 +102,7 @@ static struct bio *mpage_bio_submit(int rw, struct bio *bio) static struct bio * mpage_alloc(struct block_device *bdev, sector_t first_sector, int nr_vecs, - unsigned int __nocast gfp_flags) + gfp_t gfp_flags) { struct bio *bio; diff --git a/fs/ntfs/malloc.h b/fs/ntfs/malloc.h index 006946e..590887b 100644 --- a/fs/ntfs/malloc.h +++ b/fs/ntfs/malloc.h @@ -40,7 +40,7 @@ * Depending on @gfp_mask the allocation may be guaranteed to succeed. */ static inline void *__ntfs_malloc(unsigned long size, - unsigned int __nocast gfp_mask) + gfp_t gfp_mask) { if (likely(size <= PAGE_SIZE)) { BUG_ON(!size); diff --git a/fs/posix_acl.c b/fs/posix_acl.c index 296480e..6c8dcf7 100644 --- a/fs/posix_acl.c +++ b/fs/posix_acl.c @@ -35,7 +35,7 @@ EXPORT_SYMBOL(posix_acl_permission); * Allocate a new ACL with the specified number of entries. */ struct posix_acl * -posix_acl_alloc(int count, unsigned int __nocast flags) +posix_acl_alloc(int count, gfp_t flags) { const size_t size = sizeof(struct posix_acl) + count * sizeof(struct posix_acl_entry); @@ -51,7 +51,7 @@ posix_acl_alloc(int count, unsigned int __nocast flags) * Clone an ACL. */ struct posix_acl * -posix_acl_clone(const struct posix_acl *acl, unsigned int __nocast flags) +posix_acl_clone(const struct posix_acl *acl, gfp_t flags) { struct posix_acl *clone = NULL; @@ -185,7 +185,7 @@ posix_acl_equiv_mode(const struct posix_acl *acl, mode_t *mode_p) * Create an ACL representing the file mode permission bits of an inode. */ struct posix_acl * -posix_acl_from_mode(mode_t mode, unsigned int __nocast flags) +posix_acl_from_mode(mode_t mode, gfp_t flags) { struct posix_acl *acl = posix_acl_alloc(3, flags); if (!acl) diff --git a/fs/xfs/linux-2.6/kmem.c b/fs/xfs/linux-2.6/kmem.c index 4b18455..d2653b5 100644 --- a/fs/xfs/linux-2.6/kmem.c +++ b/fs/xfs/linux-2.6/kmem.c @@ -45,7 +45,7 @@ void * -kmem_alloc(size_t size, unsigned int __nocast flags) +kmem_alloc(size_t size, gfp_t flags) { int retries = 0; unsigned int lflags = kmem_flags_convert(flags); @@ -67,7 +67,7 @@ kmem_alloc(size_t size, unsigned int __nocast flags) } void * -kmem_zalloc(size_t size, unsigned int __nocast flags) +kmem_zalloc(size_t size, gfp_t flags) { void *ptr; @@ -90,7 +90,7 @@ kmem_free(void *ptr, size_t size) void * kmem_realloc(void *ptr, size_t newsize, size_t oldsize, - unsigned int __nocast flags) + gfp_t flags) { void *new; @@ -105,7 +105,7 @@ kmem_realloc(void *ptr, size_t newsize, size_t oldsize, } void * -kmem_zone_alloc(kmem_zone_t *zone, unsigned int __nocast flags) +kmem_zone_alloc(kmem_zone_t *zone, gfp_t flags) { int retries = 0; unsigned int lflags = kmem_flags_convert(flags); @@ -124,7 +124,7 @@ kmem_zone_alloc(kmem_zone_t *zone, unsigned int __nocast flags) } void * -kmem_zone_zalloc(kmem_zone_t *zone, unsigned int __nocast flags) +kmem_zone_zalloc(kmem_zone_t *zone, gfp_t flags) { void *ptr; diff --git a/fs/xfs/linux-2.6/kmem.h b/fs/xfs/linux-2.6/kmem.h index 109fcf2..ee7010f 100644 --- a/fs/xfs/linux-2.6/kmem.h +++ b/fs/xfs/linux-2.6/kmem.h @@ -81,7 +81,7 @@ typedef unsigned long xfs_pflags_t; *(NSTATEP) = *(OSTATEP); \ } while (0) -static __inline unsigned int kmem_flags_convert(unsigned int __nocast flags) +static __inline unsigned int kmem_flags_convert(gfp_t flags) { unsigned int lflags = __GFP_NOWARN; /* we'll report problems, if need be */ @@ -125,13 +125,12 @@ kmem_zone_destroy(kmem_zone_t *zone) BUG(); } -extern void *kmem_zone_zalloc(kmem_zone_t *, unsigned int __nocast); -extern void *kmem_zone_alloc(kmem_zone_t *, unsigned int __nocast); +extern void *kmem_zone_zalloc(kmem_zone_t *, gfp_t); +extern void *kmem_zone_alloc(kmem_zone_t *, gfp_t); -extern void *kmem_alloc(size_t, unsigned int __nocast); -extern void *kmem_realloc(void *, size_t, size_t, - unsigned int __nocast); -extern void *kmem_zalloc(size_t, unsigned int __nocast); +extern void *kmem_alloc(size_t, gfp_t); +extern void *kmem_realloc(void *, size_t, size_t, gfp_t); +extern void *kmem_zalloc(size_t, gfp_t); extern void kmem_free(void *, size_t); typedef struct shrinker *kmem_shaker_t; diff --git a/include/asm-generic/dma-mapping.h b/include/asm-generic/dma-mapping.h index 8cef663..747d790 100644 --- a/include/asm-generic/dma-mapping.h +++ b/include/asm-generic/dma-mapping.h @@ -35,7 +35,7 @@ dma_set_mask(struct device *dev, u64 dma_mask) static inline void * dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, - unsigned int __nocast flag) + gfp_t flag) { BUG_ON(dev->bus != &pci_bus_type); @@ -168,7 +168,7 @@ dma_set_mask(struct device *dev, u64 dma_mask) static inline void * dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, - unsigned int __nocast flag) + gfp_t flag) { BUG(); return NULL; diff --git a/include/asm-i386/dma-mapping.h b/include/asm-i386/dma-mapping.h index 563964b..e56c335 100644 --- a/include/asm-i386/dma-mapping.h +++ b/include/asm-i386/dma-mapping.h @@ -11,7 +11,7 @@ #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, unsigned int __nocast flag); + dma_addr_t *dma_handle, gfp_t flag); void dma_free_coherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle); diff --git a/include/asm-ppc/dma-mapping.h b/include/asm-ppc/dma-mapping.h index 92b8ee7..061bfca 100644 --- a/include/asm-ppc/dma-mapping.h +++ b/include/asm-ppc/dma-mapping.h @@ -61,7 +61,7 @@ static inline int dma_set_mask(struct device *dev, u64 dma_mask) static inline void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t * dma_handle, - unsigned int __nocast gfp) + gfp_t gfp) { #ifdef CONFIG_NOT_COHERENT_CACHE return __dma_alloc_coherent(size, dma_handle, gfp); diff --git a/include/asm-ppc64/dma-mapping.h b/include/asm-ppc64/dma-mapping.h index 9ad8ade..fb68fa2 100644 --- a/include/asm-ppc64/dma-mapping.h +++ b/include/asm-ppc64/dma-mapping.h @@ -19,7 +19,7 @@ extern int dma_supported(struct device *dev, u64 mask); extern int dma_set_mask(struct device *dev, u64 dma_mask); extern void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, unsigned int __nocast flag); + dma_addr_t *dma_handle, gfp_t flag); extern void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t dma_handle); extern dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, @@ -118,7 +118,7 @@ dma_cache_sync(void *vaddr, size_t size, */ struct dma_mapping_ops { void * (*alloc_coherent)(struct device *dev, size_t size, - dma_addr_t *dma_handle, unsigned int __nocast flag); + dma_addr_t *dma_handle, gfp_t flag); void (*free_coherent)(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle); dma_addr_t (*map_single)(struct device *dev, void *ptr, diff --git a/include/asm-ppc64/iommu.h b/include/asm-ppc64/iommu.h index 72dcf81..c2f3b6e 100644 --- a/include/asm-ppc64/iommu.h +++ b/include/asm-ppc64/iommu.h @@ -122,7 +122,7 @@ extern void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist, int nelems, enum dma_data_direction direction); extern void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size, - dma_addr_t *dma_handle, unsigned int __nocast flag); + dma_addr_t *dma_handle, gfp_t flag); extern void iommu_free_coherent(struct iommu_table *tbl, size_t size, void *vaddr, dma_addr_t dma_handle); extern dma_addr_t iommu_map_single(struct iommu_table *tbl, void *vaddr, diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h index aca9b34..e7d0593 100644 --- a/include/linux/atmdev.h +++ b/include/linux/atmdev.h @@ -467,7 +467,7 @@ static inline void atm_dev_put(struct atm_dev *dev) int atm_charge(struct atm_vcc *vcc,int truesize); struct sk_buff *atm_alloc_charge(struct atm_vcc *vcc,int pdu_size, - unsigned int __nocast gfp_flags); + gfp_t gfp_flags); int atm_pcr_goal(struct atm_trafprm *tp); void vcc_release_async(struct atm_vcc *vcc, int reply); diff --git a/include/linux/bio.h b/include/linux/bio.h index 6e1c79c..3344b4e8 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -276,8 +276,8 @@ extern void bio_pair_release(struct bio_pair *dbio); extern struct bio_set *bioset_create(int, int, int); extern void bioset_free(struct bio_set *); -extern struct bio *bio_alloc(unsigned int __nocast, int); -extern struct bio *bio_alloc_bioset(unsigned int __nocast, int, struct bio_set *); +extern struct bio *bio_alloc(gfp_t, int); +extern struct bio *bio_alloc_bioset(gfp_t, int, struct bio_set *); extern void bio_put(struct bio *); extern void bio_free(struct bio *, struct bio_set *); @@ -287,7 +287,7 @@ extern int bio_phys_segments(struct request_queue *, struct bio *); extern int bio_hw_segments(struct request_queue *, struct bio *); extern void __bio_clone(struct bio *, struct bio *); -extern struct bio *bio_clone(struct bio *, unsigned int __nocast); +extern struct bio *bio_clone(struct bio *, gfp_t); extern void bio_init(struct bio *); diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h index 9082849..6a1d154 100644 --- a/include/linux/buffer_head.h +++ b/include/linux/buffer_head.h @@ -172,7 +172,7 @@ void __brelse(struct buffer_head *); void __bforget(struct buffer_head *); void __breadahead(struct block_device *, sector_t block, int size); struct buffer_head *__bread(struct block_device *, sector_t block, int size); -struct buffer_head *alloc_buffer_head(unsigned int __nocast gfp_flags); +struct buffer_head *alloc_buffer_head(gfp_t gfp_flags); void free_buffer_head(struct buffer_head * bh); void FASTCALL(unlock_buffer(struct buffer_head *bh)); void FASTCALL(__lock_buffer(struct buffer_head *bh)); diff --git a/include/linux/connector.h b/include/linux/connector.h index 96582c9..95952cc 100644 --- a/include/linux/connector.h +++ b/include/linux/connector.h @@ -149,7 +149,7 @@ struct cn_dev { int cn_add_callback(struct cb_id *, char *, void (*callback) (void *)); void cn_del_callback(struct cb_id *); -int cn_netlink_send(struct cn_msg *, u32, unsigned int __nocast); +int cn_netlink_send(struct cn_msg *, u32, gfp_t); int cn_queue_add_callback(struct cn_queue_dev *dev, char *name, struct cb_id *id, void (*callback)(void *)); void cn_queue_del_callback(struct cn_queue_dev *dev, struct cb_id *id); diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h index 24062a1..6e2deef 100644 --- a/include/linux/cpuset.h +++ b/include/linux/cpuset.h @@ -23,7 +23,7 @@ void cpuset_init_current_mems_allowed(void); void cpuset_update_current_mems_allowed(void); void cpuset_restrict_to_mems_allowed(unsigned long *nodes); int cpuset_zonelist_valid_mems_allowed(struct zonelist *zl); -extern int cpuset_zone_allowed(struct zone *z, unsigned int __nocast gfp_mask); +extern int cpuset_zone_allowed(struct zone *z, gfp_t gfp_mask); extern int cpuset_excl_nodes_overlap(const struct task_struct *p); extern struct file_operations proc_cpuset_operations; extern char *cpuset_task_status_allowed(struct task_struct *task, char *buffer); @@ -49,8 +49,7 @@ static inline int cpuset_zonelist_valid_mems_allowed(struct zonelist *zl) return 1; } -static inline int cpuset_zone_allowed(struct zone *z, - unsigned int __nocast gfp_mask) +static inline int cpuset_zone_allowed(struct zone *z, gfp_t gfp_mask) { return 1; } diff --git a/include/linux/dmapool.h b/include/linux/dmapool.h index 4932ee5..76f12f4 100644 --- a/include/linux/dmapool.h +++ b/include/linux/dmapool.h @@ -19,7 +19,7 @@ struct dma_pool *dma_pool_create(const char *name, struct device *dev, void dma_pool_destroy(struct dma_pool *pool); -void *dma_pool_alloc(struct dma_pool *pool, unsigned int __nocast mem_flags, +void *dma_pool_alloc(struct dma_pool *pool, gfp_t mem_flags, dma_addr_t *handle); void dma_pool_free(struct dma_pool *pool, void *vaddr, dma_addr_t addr); diff --git a/include/linux/gfp.h b/include/linux/gfp.h index 4dc990f..3010e17 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -85,9 +85,9 @@ static inline void arch_free_page(struct page *page, int order) { } #endif extern struct page * -FASTCALL(__alloc_pages(unsigned int, unsigned int, struct zonelist *)); +FASTCALL(__alloc_pages(gfp_t, unsigned int, struct zonelist *)); -static inline struct page *alloc_pages_node(int nid, unsigned int __nocast gfp_mask, +static inline struct page *alloc_pages_node(int nid, gfp_t gfp_mask, unsigned int order) { if (unlikely(order >= MAX_ORDER)) @@ -98,17 +98,17 @@ static inline struct page *alloc_pages_node(int nid, unsigned int __nocast gfp_m } #ifdef CONFIG_NUMA -extern struct page *alloc_pages_current(unsigned int __nocast gfp_mask, unsigned order); +extern struct page *alloc_pages_current(gfp_t gfp_mask, unsigned order); static inline struct page * -alloc_pages(unsigned int __nocast gfp_mask, unsigned int order) +alloc_pages(gfp_t gfp_mask, unsigned int order) { if (unlikely(order >= MAX_ORDER)) return NULL; return alloc_pages_current(gfp_mask, order); } -extern struct page *alloc_page_vma(unsigned __nocast gfp_mask, +extern struct page *alloc_page_vma(gfp_t gfp_mask, struct vm_area_struct *vma, unsigned long addr); #else #define alloc_pages(gfp_mask, order) \ @@ -117,8 +117,8 @@ extern struct page *alloc_page_vma(unsigned __nocast gfp_mask, #endif #define alloc_page(gfp_mask) alloc_pages(gfp_mask, 0) -extern unsigned long FASTCALL(__get_free_pages(unsigned int __nocast gfp_mask, unsigned int order)); -extern unsigned long FASTCALL(get_zeroed_page(unsigned int __nocast gfp_mask)); +extern unsigned long FASTCALL(__get_free_pages(gfp_t gfp_mask, unsigned int order)); +extern unsigned long FASTCALL(get_zeroed_page(gfp_t gfp_mask)); #define __get_free_page(gfp_mask) \ __get_free_pages((gfp_mask),0) diff --git a/include/linux/jbd.h b/include/linux/jbd.h index de09726..ff853b3 100644 --- a/include/linux/jbd.h +++ b/include/linux/jbd.h @@ -935,7 +935,7 @@ void journal_put_journal_head(struct journal_head *jh); */ extern kmem_cache_t *jbd_handle_cache; -static inline handle_t *jbd_alloc_handle(unsigned int __nocast gfp_flags) +static inline handle_t *jbd_alloc_handle(gfp_t gfp_flags) { return kmem_cache_alloc(jbd_handle_cache, gfp_flags); } diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h index c27cd42..48eccd8 100644 --- a/include/linux/kfifo.h +++ b/include/linux/kfifo.h @@ -35,8 +35,8 @@ struct kfifo { }; extern struct kfifo *kfifo_init(unsigned char *buffer, unsigned int size, - unsigned int __nocast gfp_mask, spinlock_t *lock); -extern struct kfifo *kfifo_alloc(unsigned int size, unsigned int __nocast gfp_mask, + gfp_t gfp_mask, spinlock_t *lock); +extern struct kfifo *kfifo_alloc(unsigned int size, gfp_t gfp_mask, spinlock_t *lock); extern void kfifo_free(struct kfifo *fifo); extern unsigned int __kfifo_put(struct kfifo *fifo, diff --git a/include/linux/mempool.h b/include/linux/mempool.h index 796220c..f2427d7 100644 --- a/include/linux/mempool.h +++ b/include/linux/mempool.h @@ -6,7 +6,7 @@ #include -typedef void * (mempool_alloc_t)(unsigned int __nocast gfp_mask, void *pool_data); +typedef void * (mempool_alloc_t)(gfp_t gfp_mask, void *pool_data); typedef void (mempool_free_t)(void *element, void *pool_data); typedef struct mempool_s { @@ -26,17 +26,16 @@ extern mempool_t *mempool_create(int min_nr, mempool_alloc_t *alloc_fn, extern mempool_t *mempool_create_node(int min_nr, mempool_alloc_t *alloc_fn, mempool_free_t *free_fn, void *pool_data, int nid); -extern int mempool_resize(mempool_t *pool, int new_min_nr, - unsigned int __nocast gfp_mask); +extern int mempool_resize(mempool_t *pool, int new_min_nr, gfp_t gfp_mask); extern void mempool_destroy(mempool_t *pool); -extern void * mempool_alloc(mempool_t *pool, unsigned int __nocast gfp_mask); +extern void * mempool_alloc(mempool_t *pool, gfp_t gfp_mask); extern void mempool_free(void *element, mempool_t *pool); /* * A mempool_alloc_t and mempool_free_t that get the memory from * a slab that is passed in through pool_data. */ -void *mempool_alloc_slab(unsigned int __nocast gfp_mask, void *pool_data); +void *mempool_alloc_slab(gfp_t gfp_mask, void *pool_data); void mempool_free_slab(void *element, void *pool_data); #endif /* _LINUX_MEMPOOL_H */ diff --git a/include/linux/netlink.h b/include/linux/netlink.h index bdebdc5..ba25ca8 100644 --- a/include/linux/netlink.h +++ b/include/linux/netlink.h @@ -131,7 +131,7 @@ extern struct sock *netlink_kernel_create(int unit, unsigned int groups, void (* extern void netlink_ack(struct sk_buff *in_skb, struct nlmsghdr *nlh, int err); extern int netlink_unicast(struct sock *ssk, struct sk_buff *skb, __u32 pid, int nonblock); extern int netlink_broadcast(struct sock *ssk, struct sk_buff *skb, __u32 pid, - __u32 group, unsigned int __nocast allocation); + __u32 group, gfp_t allocation); extern void netlink_set_err(struct sock *ssk, __u32 pid, __u32 group, int code); extern int netlink_register_notifier(struct notifier_block *nb); extern int netlink_unregister_notifier(struct notifier_block *nb); diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h index d9a2564..acbf31c 100644 --- a/include/linux/pagemap.h +++ b/include/linux/pagemap.h @@ -19,7 +19,7 @@ #define AS_EIO (__GFP_BITS_SHIFT + 0) /* IO error on async write */ #define AS_ENOSPC (__GFP_BITS_SHIFT + 1) /* ENOSPC on async write */ -static inline unsigned int __nocast mapping_gfp_mask(struct address_space * mapping) +static inline gfp_t mapping_gfp_mask(struct address_space * mapping) { return mapping->flags & __GFP_BITS_MASK; } diff --git a/include/linux/posix_acl.h b/include/linux/posix_acl.h index 4caeddd..4bc2412 100644 --- a/include/linux/posix_acl.h +++ b/include/linux/posix_acl.h @@ -71,11 +71,11 @@ posix_acl_release(struct posix_acl *acl) /* posix_acl.c */ -extern struct posix_acl *posix_acl_alloc(int, unsigned int __nocast); -extern struct posix_acl *posix_acl_clone(const struct posix_acl *, unsigned int __nocast); +extern struct posix_acl *posix_acl_alloc(int, gfp_t); +extern struct posix_acl *posix_acl_clone(const struct posix_acl *, gfp_t); extern int posix_acl_valid(const struct posix_acl *); extern int posix_acl_permission(struct inode *, const struct posix_acl *, int); -extern struct posix_acl *posix_acl_from_mode(mode_t, unsigned int __nocast); +extern struct posix_acl *posix_acl_from_mode(mode_t, gfp_t); extern int posix_acl_equiv_mode(const struct posix_acl *, mode_t *); extern int posix_acl_create_masq(struct posix_acl *, mode_t *); extern int posix_acl_chmod_masq(struct posix_acl *, mode_t); diff --git a/include/linux/radix-tree.h b/include/linux/radix-tree.h index 9c51917..045d476 100644 --- a/include/linux/radix-tree.h +++ b/include/linux/radix-tree.h @@ -50,7 +50,7 @@ void *radix_tree_delete(struct radix_tree_root *, unsigned long); unsigned int radix_tree_gang_lookup(struct radix_tree_root *root, void **results, unsigned long first_index, unsigned int max_items); -int radix_tree_preload(unsigned int __nocast gfp_mask); +int radix_tree_preload(gfp_t gfp_mask); void radix_tree_init(void); void *radix_tree_tag_set(struct radix_tree_root *root, unsigned long index, int tag); diff --git a/include/linux/security.h b/include/linux/security.h index 0e43460..627382e 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -2634,8 +2634,7 @@ static inline int security_socket_getpeersec(struct socket *sock, char __user *o return security_ops->socket_getpeersec(sock, optval, optlen, len); } -static inline int security_sk_alloc(struct sock *sk, int family, - unsigned int __nocast priority) +static inline int security_sk_alloc(struct sock *sk, int family, gfp_t priority) { return security_ops->sk_alloc_security(sk, family, priority); } @@ -2752,8 +2751,7 @@ static inline int security_socket_getpeersec(struct socket *sock, char __user *o return -ENOPROTOOPT; } -static inline int security_sk_alloc(struct sock *sk, int family, - unsigned int __nocast priority) +static inline int security_sk_alloc(struct sock *sk, int family, gfp_t priority) { return 0; } diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 466c879..8f5d9e7 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -302,37 +302,37 @@ struct sk_buff { extern void __kfree_skb(struct sk_buff *skb); extern struct sk_buff *__alloc_skb(unsigned int size, - unsigned int __nocast priority, int fclone); + gfp_t priority, int fclone); static inline struct sk_buff *alloc_skb(unsigned int size, - unsigned int __nocast priority) + gfp_t priority) { return __alloc_skb(size, priority, 0); } static inline struct sk_buff *alloc_skb_fclone(unsigned int size, - unsigned int __nocast priority) + gfp_t priority) { return __alloc_skb(size, priority, 1); } extern struct sk_buff *alloc_skb_from_cache(kmem_cache_t *cp, unsigned int size, - unsigned int __nocast priority); + gfp_t priority); extern void kfree_skbmem(struct sk_buff *skb); extern struct sk_buff *skb_clone(struct sk_buff *skb, - unsigned int __nocast priority); + gfp_t priority); extern struct sk_buff *skb_copy(const struct sk_buff *skb, - unsigned int __nocast priority); + gfp_t priority); extern struct sk_buff *pskb_copy(struct sk_buff *skb, - unsigned int __nocast gfp_mask); + gfp_t gfp_mask); extern int pskb_expand_head(struct sk_buff *skb, int nhead, int ntail, - unsigned int __nocast gfp_mask); + gfp_t gfp_mask); extern struct sk_buff *skb_realloc_headroom(struct sk_buff *skb, unsigned int headroom); extern struct sk_buff *skb_copy_expand(const struct sk_buff *skb, int newheadroom, int newtailroom, - unsigned int __nocast priority); + gfp_t priority); extern struct sk_buff * skb_pad(struct sk_buff *skb, int pad); #define dev_kfree_skb(a) kfree_skb(a) extern void skb_over_panic(struct sk_buff *skb, int len, @@ -484,7 +484,7 @@ static inline int skb_shared(const struct sk_buff *skb) * NULL is returned on a memory allocation failure. */ static inline struct sk_buff *skb_share_check(struct sk_buff *skb, - unsigned int __nocast pri) + gfp_t pri) { might_sleep_if(pri & __GFP_WAIT); if (skb_shared(skb)) { @@ -516,7 +516,7 @@ static inline struct sk_buff *skb_share_check(struct sk_buff *skb, * %NULL is returned on a memory allocation failure. */ static inline struct sk_buff *skb_unshare(struct sk_buff *skb, - unsigned int __nocast pri) + gfp_t pri) { might_sleep_if(pri & __GFP_WAIT); if (skb_cloned(skb)) { @@ -1017,7 +1017,7 @@ static inline void __skb_queue_purge(struct sk_buff_head *list) * %NULL is returned in there is no free memory. */ static inline struct sk_buff *__dev_alloc_skb(unsigned int length, - unsigned int __nocast gfp_mask) + gfp_t gfp_mask) { struct sk_buff *skb = alloc_skb(length + 16, gfp_mask); if (likely(skb)) @@ -1130,8 +1130,8 @@ static inline int skb_can_coalesce(struct sk_buff *skb, int i, * If there is no free memory -ENOMEM is returned, otherwise zero * is returned and the old skb data released. */ -extern int __skb_linearize(struct sk_buff *skb, unsigned int __nocast gfp); -static inline int skb_linearize(struct sk_buff *skb, unsigned int __nocast gfp) +extern int __skb_linearize(struct sk_buff *skb, gfp_t gfp); +static inline int skb_linearize(struct sk_buff *skb, gfp_t gfp) { return __skb_linearize(skb, gfp); } diff --git a/include/linux/slab.h b/include/linux/slab.h index 1f356f3..5fc04a1 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -61,11 +61,11 @@ extern kmem_cache_t *kmem_cache_create(const char *, size_t, size_t, unsigned lo void (*)(void *, kmem_cache_t *, unsigned long)); extern int kmem_cache_destroy(kmem_cache_t *); extern int kmem_cache_shrink(kmem_cache_t *); -extern void *kmem_cache_alloc(kmem_cache_t *, unsigned int __nocast); +extern void *kmem_cache_alloc(kmem_cache_t *, gfp_t); extern void kmem_cache_free(kmem_cache_t *, void *); extern unsigned int kmem_cache_size(kmem_cache_t *); extern const char *kmem_cache_name(kmem_cache_t *); -extern kmem_cache_t *kmem_find_general_cachep(size_t size, unsigned int __nocast gfpflags); +extern kmem_cache_t *kmem_find_general_cachep(size_t size, gfp_t gfpflags); /* Size description struct for general caches. */ struct cache_sizes { @@ -74,9 +74,9 @@ struct cache_sizes { kmem_cache_t *cs_dmacachep; }; extern struct cache_sizes malloc_sizes[]; -extern void *__kmalloc(size_t, unsigned int __nocast); +extern void *__kmalloc(size_t, gfp_t); -static inline void *kmalloc(size_t size, unsigned int __nocast flags) +static inline void *kmalloc(size_t size, gfp_t flags) { if (__builtin_constant_p(size)) { int i = 0; @@ -99,7 +99,7 @@ found: return __kmalloc(size, flags); } -extern void *kzalloc(size_t, unsigned int __nocast); +extern void *kzalloc(size_t, gfp_t); /** * kcalloc - allocate memory for an array. The memory is set to zero. @@ -107,7 +107,7 @@ extern void *kzalloc(size_t, unsigned int __nocast); * @size: element size. * @flags: the type of memory to allocate. */ -static inline void *kcalloc(size_t n, size_t size, unsigned int __nocast flags) +static inline void *kcalloc(size_t n, size_t size, gfp_t flags) { if (n != 0 && size > INT_MAX / n) return NULL; @@ -118,15 +118,14 @@ extern void kfree(const void *); extern unsigned int ksize(const void *); #ifdef CONFIG_NUMA -extern void *kmem_cache_alloc_node(kmem_cache_t *, - unsigned int __nocast flags, int node); -extern void *kmalloc_node(size_t size, unsigned int __nocast flags, int node); +extern void *kmem_cache_alloc_node(kmem_cache_t *, gfp_t flags, int node); +extern void *kmalloc_node(size_t size, gfp_t flags, int node); #else static inline void *kmem_cache_alloc_node(kmem_cache_t *cachep, int flags, int node) { return kmem_cache_alloc(cachep, flags); } -static inline void *kmalloc_node(size_t size, unsigned int __nocast flags, int node) +static inline void *kmalloc_node(size_t size, gfp_t flags, int node) { return kmalloc(size, flags); } diff --git a/include/linux/string.h b/include/linux/string.h index dab2652ac..369be32 100644 --- a/include/linux/string.h +++ b/include/linux/string.h @@ -88,7 +88,7 @@ extern int memcmp(const void *,const void *,__kernel_size_t); extern void * memchr(const void *,int,__kernel_size_t); #endif -extern char *kstrdup(const char *s, unsigned int __nocast gfp); +extern char *kstrdup(const char *s, gfp_t gfp); #ifdef __cplusplus } diff --git a/include/linux/swap.h b/include/linux/swap.h index 3c9ff00..a7bf1a3 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -147,7 +147,7 @@ struct swap_list_t { #define vm_swap_full() (nr_swap_pages*2 < total_swap_pages) /* linux/mm/oom_kill.c */ -extern void out_of_memory(unsigned int __nocast gfp_mask, int order); +extern void out_of_memory(gfp_t gfp_mask, int order); /* linux/mm/memory.c */ extern void swapin_readahead(swp_entry_t, unsigned long, struct vm_area_struct *); diff --git a/include/linux/textsearch.h b/include/linux/textsearch.h index 1a4990e..515046d 100644 --- a/include/linux/textsearch.h +++ b/include/linux/textsearch.h @@ -159,7 +159,7 @@ extern unsigned int textsearch_find_continuous(struct ts_config *, #define TS_PRIV_ALIGN(len) (((len) + TS_PRIV_ALIGNTO-1) & ~(TS_PRIV_ALIGNTO-1)) static inline struct ts_config *alloc_ts_config(size_t payload, - unsigned int __nocast gfp_mask) + gfp_t gfp_mask) { struct ts_config *conf; diff --git a/include/linux/types.h b/include/linux/types.h index 2b678c2..0aee34f 100644 --- a/include/linux/types.h +++ b/include/linux/types.h @@ -165,6 +165,10 @@ typedef __u64 __bitwise __le64; typedef __u64 __bitwise __be64; #endif +#ifdef __KERNEL__ +typedef unsigned __nocast gfp_t; +#endif + struct ustat { __kernel_daddr_t f_tfree; __kernel_ino_t f_tinode; diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h index b244f69..3701a06 100644 --- a/include/linux/vmalloc.h +++ b/include/linux/vmalloc.h @@ -34,8 +34,8 @@ struct vm_struct { extern void *vmalloc(unsigned long size); extern void *vmalloc_exec(unsigned long size); extern void *vmalloc_32(unsigned long size); -extern void *__vmalloc(unsigned long size, unsigned int __nocast gfp_mask, pgprot_t prot); -extern void *__vmalloc_area(struct vm_struct *area, unsigned int __nocast gfp_mask, pgprot_t prot); +extern void *__vmalloc(unsigned long size, gfp_t gfp_mask, pgprot_t prot); +extern void *__vmalloc_area(struct vm_struct *area, gfp_t gfp_mask, pgprot_t prot); extern void vfree(void *addr); extern void *vmap(struct page **pages, unsigned int count, diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h index 6dfa4a6..2104586 100644 --- a/include/net/bluetooth/bluetooth.h +++ b/include/net/bluetooth/bluetooth.h @@ -136,7 +136,7 @@ struct bt_skb_cb { }; #define bt_cb(skb) ((struct bt_skb_cb *)(skb->cb)) -static inline struct sk_buff *bt_skb_alloc(unsigned int len, unsigned int __nocast how) +static inline struct sk_buff *bt_skb_alloc(unsigned int len, gfp_t how) { struct sk_buff *skb; diff --git a/include/net/bluetooth/rfcomm.h b/include/net/bluetooth/rfcomm.h index ffea9d5..fbe557f 100644 --- a/include/net/bluetooth/rfcomm.h +++ b/include/net/bluetooth/rfcomm.h @@ -230,7 +230,7 @@ int rfcomm_send_rpn(struct rfcomm_session *s, int cr, u8 dlci, u8 xon_char, u8 xoff_char, u16 param_mask); /* ---- RFCOMM DLCs (channels) ---- */ -struct rfcomm_dlc *rfcomm_dlc_alloc(unsigned int __nocast prio); +struct rfcomm_dlc *rfcomm_dlc_alloc(gfp_t prio); void rfcomm_dlc_free(struct rfcomm_dlc *d); int rfcomm_dlc_open(struct rfcomm_dlc *d, bdaddr_t *src, bdaddr_t *dst, u8 channel); int rfcomm_dlc_close(struct rfcomm_dlc *d, int reason); diff --git a/include/net/dn_nsp.h b/include/net/dn_nsp.h index 8a0891e..1ba03be 100644 --- a/include/net/dn_nsp.h +++ b/include/net/dn_nsp.h @@ -19,9 +19,9 @@ extern void dn_nsp_send_data_ack(struct sock *sk); extern void dn_nsp_send_oth_ack(struct sock *sk); extern void dn_nsp_delayed_ack(struct sock *sk); extern void dn_send_conn_ack(struct sock *sk); -extern void dn_send_conn_conf(struct sock *sk, unsigned int __nocast gfp); +extern void dn_send_conn_conf(struct sock *sk, gfp_t gfp); extern void dn_nsp_send_disc(struct sock *sk, unsigned char type, - unsigned short reason, unsigned int __nocast gfp); + unsigned short reason, gfp_t gfp); extern void dn_nsp_return_disc(struct sk_buff *skb, unsigned char type, unsigned short reason); extern void dn_nsp_send_link(struct sock *sk, unsigned char lsflags, char fcval); @@ -29,14 +29,14 @@ extern void dn_nsp_send_conninit(struct sock *sk, unsigned char flags); extern void dn_nsp_output(struct sock *sk); extern int dn_nsp_check_xmit_queue(struct sock *sk, struct sk_buff *skb, struct sk_buff_head *q, unsigned short acknum); -extern void dn_nsp_queue_xmit(struct sock *sk, struct sk_buff *skb, unsigned int __nocast gfp, int oob); +extern void dn_nsp_queue_xmit(struct sock *sk, struct sk_buff *skb, gfp_t gfp, int oob); extern unsigned long dn_nsp_persist(struct sock *sk); extern int dn_nsp_xmit_timeout(struct sock *sk); extern int dn_nsp_rx(struct sk_buff *); extern int dn_nsp_backlog_rcv(struct sock *sk, struct sk_buff *skb); -extern struct sk_buff *dn_alloc_skb(struct sock *sk, int size, unsigned int __nocast pri); +extern struct sk_buff *dn_alloc_skb(struct sock *sk, int size, gfp_t pri); extern struct sk_buff *dn_alloc_send_skb(struct sock *sk, size_t *size, int noblock, long timeo, int *err); #define NSP_REASON_OK 0 /* No error */ diff --git a/include/net/dn_route.h b/include/net/dn_route.h index 11fe973..5122da3 100644 --- a/include/net/dn_route.h +++ b/include/net/dn_route.h @@ -15,7 +15,7 @@ GNU General Public License for more details. *******************************************************************************/ -extern struct sk_buff *dn_alloc_skb(struct sock *sk, int size, unsigned int __nocast pri); +extern struct sk_buff *dn_alloc_skb(struct sock *sk, int size, gfp_t pri); extern int dn_route_output_sock(struct dst_entry **pprt, struct flowi *, struct sock *sk, int flags); extern int dn_cache_dump(struct sk_buff *skb, struct netlink_callback *cb); extern int dn_cache_getroute(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg); diff --git a/include/net/inet_connection_sock.h b/include/net/inet_connection_sock.h index 651f824..b0c9906 100644 --- a/include/net/inet_connection_sock.h +++ b/include/net/inet_connection_sock.h @@ -94,7 +94,7 @@ static inline void *inet_csk_ca(const struct sock *sk) extern struct sock *inet_csk_clone(struct sock *sk, const struct request_sock *req, - const unsigned int __nocast priority); + const gfp_t priority); enum inet_csk_ack_state_t { ICSK_ACK_SCHED = 1, diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h index ecb2b06..3b5559a 100644 --- a/include/net/ip_vs.h +++ b/include/net/ip_vs.h @@ -832,7 +832,7 @@ extern void ip_vs_app_inc_put(struct ip_vs_app *inc); extern int ip_vs_app_pkt_out(struct ip_vs_conn *, struct sk_buff **pskb); extern int ip_vs_app_pkt_in(struct ip_vs_conn *, struct sk_buff **pskb); -extern int ip_vs_skb_replace(struct sk_buff *skb, unsigned int __nocast pri, +extern int ip_vs_skb_replace(struct sk_buff *skb, gfp_t pri, char *o_buf, int o_len, char *n_buf, int n_len); extern int ip_vs_app_init(void); extern void ip_vs_app_cleanup(void); diff --git a/include/net/llc_conn.h b/include/net/llc_conn.h index 54852ff..00730d2 100644 --- a/include/net/llc_conn.h +++ b/include/net/llc_conn.h @@ -93,7 +93,7 @@ static __inline__ char llc_backlog_type(struct sk_buff *skb) return skb->cb[sizeof(skb->cb) - 1]; } -extern struct sock *llc_sk_alloc(int family, unsigned int __nocast priority, +extern struct sock *llc_sk_alloc(int family, gfp_t priority, struct proto *prot); extern void llc_sk_free(struct sock *sk); diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h index e1d5ec1..8f24121 100644 --- a/include/net/sctp/sctp.h +++ b/include/net/sctp/sctp.h @@ -125,7 +125,7 @@ */ extern struct sock *sctp_get_ctl_sock(void); extern int sctp_copy_local_addr_list(struct sctp_bind_addr *, - sctp_scope_t, unsigned int __nocast gfp, + sctp_scope_t, gfp_t gfp, int flags); extern struct sctp_pf *sctp_get_pf_specific(sa_family_t family); extern int sctp_register_pf(struct sctp_pf *, sa_family_t); diff --git a/include/net/sctp/sm.h b/include/net/sctp/sm.h index 58462164..1eac3d0 100644 --- a/include/net/sctp/sm.h +++ b/include/net/sctp/sm.h @@ -181,17 +181,17 @@ const sctp_sm_table_entry_t *sctp_sm_lookup_event(sctp_event_t, int sctp_chunk_iif(const struct sctp_chunk *); struct sctp_association *sctp_make_temp_asoc(const struct sctp_endpoint *, struct sctp_chunk *, - unsigned int __nocast gfp); + gfp_t gfp); __u32 sctp_generate_verification_tag(void); void sctp_populate_tie_tags(__u8 *cookie, __u32 curTag, __u32 hisTag); /* Prototypes for chunk-building functions. */ struct sctp_chunk *sctp_make_init(const struct sctp_association *, const struct sctp_bind_addr *, - unsigned int __nocast gfp, int vparam_len); + gfp_t gfp, int vparam_len); struct sctp_chunk *sctp_make_init_ack(const struct sctp_association *, const struct sctp_chunk *, - const unsigned int __nocast gfp, + const gfp_t gfp, const int unkparam_len); struct sctp_chunk *sctp_make_cookie_echo(const struct sctp_association *, const struct sctp_chunk *); @@ -265,7 +265,7 @@ int sctp_do_sm(sctp_event_t event_type, sctp_subtype_t subtype, struct sctp_endpoint *, struct sctp_association *asoc, void *event_arg, - unsigned int __nocast gfp); + gfp_t gfp); /* 2nd level prototypes */ void sctp_generate_t3_rtx_event(unsigned long peer); @@ -276,7 +276,7 @@ void sctp_ootb_pkt_free(struct sctp_packet *); struct sctp_association *sctp_unpack_cookie(const struct sctp_endpoint *, const struct sctp_association *, struct sctp_chunk *, - unsigned int __nocast gfp, int *err, + gfp_t gfp, int *err, struct sctp_chunk **err_chk_p); int sctp_addip_addr_config(struct sctp_association *, sctp_param_t, struct sockaddr_storage*, int); diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index 994009b..9c385b6 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -446,7 +446,7 @@ struct sctp_ssnmap { }; struct sctp_ssnmap *sctp_ssnmap_new(__u16 in, __u16 out, - unsigned int __nocast gfp); + gfp_t gfp); void sctp_ssnmap_free(struct sctp_ssnmap *map); void sctp_ssnmap_clear(struct sctp_ssnmap *map); @@ -947,7 +947,7 @@ struct sctp_transport { }; struct sctp_transport *sctp_transport_new(const union sctp_addr *, - unsigned int __nocast); + gfp_t); void sctp_transport_set_owner(struct sctp_transport *, struct sctp_association *); void sctp_transport_route(struct sctp_transport *, union sctp_addr *, @@ -1095,10 +1095,10 @@ void sctp_bind_addr_init(struct sctp_bind_addr *, __u16 port); void sctp_bind_addr_free(struct sctp_bind_addr *); int sctp_bind_addr_copy(struct sctp_bind_addr *dest, const struct sctp_bind_addr *src, - sctp_scope_t scope, unsigned int __nocast gfp, + sctp_scope_t scope, gfp_t gfp, int flags); int sctp_add_bind_addr(struct sctp_bind_addr *, union sctp_addr *, - unsigned int __nocast gfp); + gfp_t gfp); int sctp_del_bind_addr(struct sctp_bind_addr *, union sctp_addr *); int sctp_bind_addr_match(struct sctp_bind_addr *, const union sctp_addr *, struct sctp_sock *); @@ -1108,9 +1108,9 @@ union sctp_addr *sctp_find_unmatch_addr(struct sctp_bind_addr *bp, struct sctp_sock *opt); union sctp_params sctp_bind_addrs_to_raw(const struct sctp_bind_addr *bp, int *addrs_len, - unsigned int __nocast gfp); + gfp_t gfp); int sctp_raw_to_bind_addrs(struct sctp_bind_addr *bp, __u8 *raw, int len, - __u16 port, unsigned int __nocast gfp); + __u16 port, gfp_t gfp); sctp_scope_t sctp_scope(const union sctp_addr *); int sctp_in_scope(const union sctp_addr *addr, const sctp_scope_t scope); @@ -1239,7 +1239,7 @@ static inline struct sctp_endpoint *sctp_ep(struct sctp_ep_common *base) } /* These are function signatures for manipulating endpoints. */ -struct sctp_endpoint *sctp_endpoint_new(struct sock *, unsigned int __nocast); +struct sctp_endpoint *sctp_endpoint_new(struct sock *, gfp_t); void sctp_endpoint_free(struct sctp_endpoint *); void sctp_endpoint_put(struct sctp_endpoint *); void sctp_endpoint_hold(struct sctp_endpoint *); @@ -1260,7 +1260,7 @@ int sctp_verify_init(const struct sctp_association *asoc, sctp_cid_t, struct sctp_chunk **err_chunk); int sctp_process_init(struct sctp_association *, sctp_cid_t cid, const union sctp_addr *peer, - sctp_init_chunk_t *init, unsigned int __nocast gfp); + sctp_init_chunk_t *init, gfp_t gfp); __u32 sctp_generate_tag(const struct sctp_endpoint *); __u32 sctp_generate_tsn(const struct sctp_endpoint *); @@ -1723,7 +1723,7 @@ static inline struct sctp_association *sctp_assoc(struct sctp_ep_common *base) struct sctp_association * sctp_association_new(const struct sctp_endpoint *, const struct sock *, - sctp_scope_t scope, unsigned int __nocast gfp); + sctp_scope_t scope, gfp_t gfp); void sctp_association_free(struct sctp_association *); void sctp_association_put(struct sctp_association *); void sctp_association_hold(struct sctp_association *); @@ -1739,7 +1739,7 @@ int sctp_assoc_lookup_laddr(struct sctp_association *asoc, const union sctp_addr *laddr); struct sctp_transport *sctp_assoc_add_peer(struct sctp_association *, const union sctp_addr *address, - const unsigned int __nocast gfp, + const gfp_t gfp, const int peer_state); void sctp_assoc_del_peer(struct sctp_association *asoc, const union sctp_addr *addr); @@ -1764,10 +1764,10 @@ void sctp_assoc_rwnd_decrease(struct sctp_association *, unsigned); void sctp_assoc_set_primary(struct sctp_association *, struct sctp_transport *); int sctp_assoc_set_bind_addr_from_ep(struct sctp_association *, - unsigned int __nocast); + gfp_t); int sctp_assoc_set_bind_addr_from_cookie(struct sctp_association *, struct sctp_cookie*, - unsigned int __nocast gfp); + gfp_t gfp); int sctp_cmp_addr_exact(const union sctp_addr *ss1, const union sctp_addr *ss2); diff --git a/include/net/sctp/ulpevent.h b/include/net/sctp/ulpevent.h index 90fe4bf..6c40cfc 100644 --- a/include/net/sctp/ulpevent.h +++ b/include/net/sctp/ulpevent.h @@ -88,7 +88,7 @@ struct sctp_ulpevent *sctp_ulpevent_make_assoc_change( __u16 error, __u16 outbound, __u16 inbound, - unsigned int __nocast gfp); + gfp_t gfp); struct sctp_ulpevent *sctp_ulpevent_make_peer_addr_change( const struct sctp_association *asoc, @@ -96,35 +96,35 @@ struct sctp_ulpevent *sctp_ulpevent_make_peer_addr_change( int flags, int state, int error, - unsigned int __nocast gfp); + gfp_t gfp); struct sctp_ulpevent *sctp_ulpevent_make_remote_error( const struct sctp_association *asoc, struct sctp_chunk *chunk, __u16 flags, - unsigned int __nocast gfp); + gfp_t gfp); struct sctp_ulpevent *sctp_ulpevent_make_send_failed( const struct sctp_association *asoc, struct sctp_chunk *chunk, __u16 flags, __u32 error, - unsigned int __nocast gfp); + gfp_t gfp); struct sctp_ulpevent *sctp_ulpevent_make_shutdown_event( const struct sctp_association *asoc, __u16 flags, - unsigned int __nocast gfp); + gfp_t gfp); struct sctp_ulpevent *sctp_ulpevent_make_pdapi( const struct sctp_association *asoc, - __u32 indication, unsigned int __nocast gfp); + __u32 indication, gfp_t gfp); struct sctp_ulpevent *sctp_ulpevent_make_adaption_indication( - const struct sctp_association *asoc, unsigned int __nocast gfp); + const struct sctp_association *asoc, gfp_t gfp); struct sctp_ulpevent *sctp_ulpevent_make_rcvmsg(struct sctp_association *asoc, struct sctp_chunk *chunk, - unsigned int __nocast gfp); + gfp_t gfp); void sctp_ulpevent_read_sndrcvinfo(const struct sctp_ulpevent *event, struct msghdr *); diff --git a/include/net/sctp/ulpqueue.h b/include/net/sctp/ulpqueue.h index 1a60c6d..a43c878 100644 --- a/include/net/sctp/ulpqueue.h +++ b/include/net/sctp/ulpqueue.h @@ -62,22 +62,19 @@ struct sctp_ulpq *sctp_ulpq_init(struct sctp_ulpq *, void sctp_ulpq_free(struct sctp_ulpq *); /* Add a new DATA chunk for processing. */ -int sctp_ulpq_tail_data(struct sctp_ulpq *, struct sctp_chunk *, - unsigned int __nocast); +int sctp_ulpq_tail_data(struct sctp_ulpq *, struct sctp_chunk *, gfp_t); /* Add a new event for propagation to the ULP. */ int sctp_ulpq_tail_event(struct sctp_ulpq *, struct sctp_ulpevent *ev); /* Renege previously received chunks. */ -void sctp_ulpq_renege(struct sctp_ulpq *, struct sctp_chunk *, - unsigned int __nocast); +void sctp_ulpq_renege(struct sctp_ulpq *, struct sctp_chunk *, gfp_t); /* Perform partial delivery. */ -void sctp_ulpq_partial_delivery(struct sctp_ulpq *, struct sctp_chunk *, - unsigned int __nocast); +void sctp_ulpq_partial_delivery(struct sctp_ulpq *, struct sctp_chunk *, gfp_t); /* Abort the partial delivery. */ -void sctp_ulpq_abort_pd(struct sctp_ulpq *, unsigned int __nocast); +void sctp_ulpq_abort_pd(struct sctp_ulpq *, gfp_t); /* Clear the partial data delivery condition on this socket. */ int sctp_clear_pd(struct sock *sk); diff --git a/include/net/sock.h b/include/net/sock.h index b644080..ecb7552 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -739,18 +739,18 @@ extern void FASTCALL(release_sock(struct sock *sk)); #define bh_unlock_sock(__sk) spin_unlock(&((__sk)->sk_lock.slock)) extern struct sock *sk_alloc(int family, - unsigned int __nocast priority, + gfp_t priority, struct proto *prot, int zero_it); extern void sk_free(struct sock *sk); extern struct sock *sk_clone(const struct sock *sk, - const unsigned int __nocast priority); + const gfp_t priority); extern struct sk_buff *sock_wmalloc(struct sock *sk, unsigned long size, int force, - unsigned int __nocast priority); + gfp_t priority); extern struct sk_buff *sock_rmalloc(struct sock *sk, unsigned long size, int force, - unsigned int __nocast priority); + gfp_t priority); extern void sock_wfree(struct sk_buff *skb); extern void sock_rfree(struct sk_buff *skb); @@ -766,7 +766,7 @@ extern struct sk_buff *sock_alloc_send_skb(struct sock *sk, int noblock, int *errcode); extern void *sock_kmalloc(struct sock *sk, int size, - unsigned int __nocast priority); + gfp_t priority); extern void sock_kfree_s(struct sock *sk, void *mem, int size); extern void sk_send_sigurg(struct sock *sk); @@ -1201,7 +1201,7 @@ static inline void sk_stream_moderate_sndbuf(struct sock *sk) static inline struct sk_buff *sk_stream_alloc_pskb(struct sock *sk, int size, int mem, - unsigned int __nocast gfp) + gfp_t gfp) { struct sk_buff *skb; int hdr_len; @@ -1224,7 +1224,7 @@ static inline struct sk_buff *sk_stream_alloc_pskb(struct sock *sk, static inline struct sk_buff *sk_stream_alloc_skb(struct sock *sk, int size, - unsigned int __nocast gfp) + gfp_t gfp) { return sk_stream_alloc_pskb(sk, size, 0, gfp); } @@ -1255,7 +1255,7 @@ static inline int sock_writeable(const struct sock *sk) return atomic_read(&sk->sk_wmem_alloc) < (sk->sk_sndbuf / 2); } -static inline unsigned int __nocast gfp_any(void) +static inline gfp_t gfp_any(void) { return in_softirq() ? GFP_ATOMIC : GFP_KERNEL; } diff --git a/include/net/tcp.h b/include/net/tcp.h index 97af77c..c24339c 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -460,8 +460,7 @@ extern void tcp_send_probe0(struct sock *); extern void tcp_send_partial(struct sock *); extern int tcp_write_wakeup(struct sock *); extern void tcp_send_fin(struct sock *sk); -extern void tcp_send_active_reset(struct sock *sk, - unsigned int __nocast priority); +extern void tcp_send_active_reset(struct sock *sk, gfp_t priority); extern int tcp_send_synack(struct sock *); extern void tcp_push_one(struct sock *, unsigned int mss_now); extern void tcp_send_ack(struct sock *sk); diff --git a/include/net/xfrm.h b/include/net/xfrm.h index b6e72f8..5beae1c 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -875,7 +875,7 @@ static inline int xfrm_dst_lookup(struct xfrm_dst **dst, struct flowi *fl, unsig } #endif -struct xfrm_policy *xfrm_policy_alloc(unsigned int __nocast gfp); +struct xfrm_policy *xfrm_policy_alloc(gfp_t gfp); extern int xfrm_policy_walk(int (*func)(struct xfrm_policy *, int, int, void*), void *); int xfrm_policy_insert(int dir, struct xfrm_policy *policy, int excl); struct xfrm_policy *xfrm_policy_bysel(int dir, struct xfrm_selector *sel, diff --git a/include/rdma/ib_mad.h b/include/rdma/ib_mad.h index 0e293fe..4172e68 100644 --- a/include/rdma/ib_mad.h +++ b/include/rdma/ib_mad.h @@ -596,7 +596,7 @@ struct ib_mad_send_buf * ib_create_send_mad(struct ib_mad_agent *mad_agent, u32 remote_qpn, u16 pkey_index, struct ib_ah *ah, int rmpp_active, int hdr_len, int data_len, - unsigned int __nocast gfp_mask); + gfp_t gfp_mask); /** * ib_free_send_mad - Returns data buffers used to send a MAD. diff --git a/include/rdma/ib_sa.h b/include/rdma/ib_sa.h index a7555c8..f404fe2 100644 --- a/include/rdma/ib_sa.h +++ b/include/rdma/ib_sa.h @@ -285,7 +285,7 @@ void ib_sa_cancel_query(int id, struct ib_sa_query *query); int ib_sa_path_rec_get(struct ib_device *device, u8 port_num, struct ib_sa_path_rec *rec, ib_sa_comp_mask comp_mask, - int timeout_ms, unsigned int __nocast gfp_mask, + int timeout_ms, gfp_t gfp_mask, void (*callback)(int status, struct ib_sa_path_rec *resp, void *context), @@ -296,7 +296,7 @@ int ib_sa_mcmember_rec_query(struct ib_device *device, u8 port_num, u8 method, struct ib_sa_mcmember_rec *rec, ib_sa_comp_mask comp_mask, - int timeout_ms, unsigned int __nocast gfp_mask, + int timeout_ms, gfp_t gfp_mask, void (*callback)(int status, struct ib_sa_mcmember_rec *resp, void *context), @@ -307,7 +307,7 @@ int ib_sa_service_rec_query(struct ib_device *device, u8 port_num, u8 method, struct ib_sa_service_rec *rec, ib_sa_comp_mask comp_mask, - int timeout_ms, unsigned int __nocast gfp_mask, + int timeout_ms, gfp_t gfp_mask, void (*callback)(int status, struct ib_sa_service_rec *resp, void *context), @@ -342,7 +342,7 @@ static inline int ib_sa_mcmember_rec_set(struct ib_device *device, u8 port_num, struct ib_sa_mcmember_rec *rec, ib_sa_comp_mask comp_mask, - int timeout_ms, unsigned int __nocast gfp_mask, + int timeout_ms, gfp_t gfp_mask, void (*callback)(int status, struct ib_sa_mcmember_rec *resp, void *context), @@ -384,7 +384,7 @@ static inline int ib_sa_mcmember_rec_delete(struct ib_device *device, u8 port_num, struct ib_sa_mcmember_rec *rec, ib_sa_comp_mask comp_mask, - int timeout_ms, unsigned int __nocast gfp_mask, + int timeout_ms, gfp_t gfp_mask, void (*callback)(int status, struct ib_sa_mcmember_rec *resp, void *context), diff --git a/include/rxrpc/call.h b/include/rxrpc/call.h index 8118731..b86f837 100644 --- a/include/rxrpc/call.h +++ b/include/rxrpc/call.h @@ -203,7 +203,7 @@ extern int rxrpc_call_write_data(struct rxrpc_call *call, size_t sioc, struct kvec *siov, uint8_t rxhdr_flags, - unsigned int __nocast alloc_flags, + gfp_t alloc_flags, int dup_data, size_t *size_sent); diff --git a/include/rxrpc/message.h b/include/rxrpc/message.h index 983d9f9..b318f27 100644 --- a/include/rxrpc/message.h +++ b/include/rxrpc/message.h @@ -63,7 +63,7 @@ extern int rxrpc_conn_newmsg(struct rxrpc_connection *conn, uint8_t type, int count, struct kvec *diov, - unsigned int __nocast alloc_flags, + gfp_t alloc_flags, struct rxrpc_message **_msg); extern int rxrpc_conn_sendmsg(struct rxrpc_connection *conn, struct rxrpc_message *msg); diff --git a/include/sound/core.h b/include/sound/core.h index 26160ad..6d971a4 100644 --- a/include/sound/core.h +++ b/include/sound/core.h @@ -290,13 +290,13 @@ void snd_memory_init(void); void snd_memory_done(void); int snd_memory_info_init(void); int snd_memory_info_done(void); -void *snd_hidden_kmalloc(size_t size, unsigned int __nocast flags); -void *snd_hidden_kzalloc(size_t size, unsigned int __nocast flags); -void *snd_hidden_kcalloc(size_t n, size_t size, unsigned int __nocast flags); +void *snd_hidden_kmalloc(size_t size, gfp_t flags); +void *snd_hidden_kzalloc(size_t size, gfp_t flags); +void *snd_hidden_kcalloc(size_t n, size_t size, gfp_t flags); void snd_hidden_kfree(const void *obj); void *snd_hidden_vmalloc(unsigned long size); void snd_hidden_vfree(void *obj); -char *snd_hidden_kstrdup(const char *s, unsigned int __nocast flags); +char *snd_hidden_kstrdup(const char *s, gfp_t flags); #define kmalloc(size, flags) snd_hidden_kmalloc(size, flags) #define kzalloc(size, flags) snd_hidden_kzalloc(size, flags) #define kcalloc(n, size, flags) snd_hidden_kcalloc(n, size, flags) diff --git a/include/sound/driver.h b/include/sound/driver.h index 0d12456..1ec2fae 100644 --- a/include/sound/driver.h +++ b/include/sound/driver.h @@ -51,7 +51,7 @@ #ifdef CONFIG_SND_DEBUG_MEMORY #include #include -void *snd_wrapper_kmalloc(size_t, unsigned int __nocast); +void *snd_wrapper_kmalloc(size_t, gfp_t); #undef kmalloc void snd_wrapper_kfree(const void *); #undef kfree diff --git a/kernel/audit.c b/kernel/audit.c index 83096b6..aefa73a 100644 --- a/kernel/audit.c +++ b/kernel/audit.c @@ -560,7 +560,7 @@ static void audit_buffer_free(struct audit_buffer *ab) } static struct audit_buffer * audit_buffer_alloc(struct audit_context *ctx, - unsigned int __nocast gfp_mask, int type) + gfp_t gfp_mask, int type) { unsigned long flags; struct audit_buffer *ab = NULL; diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 45a5719..28176d0 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -1670,7 +1670,7 @@ static const struct cpuset *nearest_exclusive_ancestor(const struct cpuset *cs) * GFP_USER - only nodes in current tasks mems allowed ok. **/ -int cpuset_zone_allowed(struct zone *z, unsigned int __nocast gfp_mask) +int cpuset_zone_allowed(struct zone *z, gfp_t gfp_mask) { int node; /* node that zone z is on */ const struct cpuset *cs; /* current cpuset ancestors */ diff --git a/kernel/kfifo.c b/kernel/kfifo.c index 179baaf..64ab045 100644 --- a/kernel/kfifo.c +++ b/kernel/kfifo.c @@ -36,7 +36,7 @@ * struct kfifo with kfree(). */ struct kfifo *kfifo_init(unsigned char *buffer, unsigned int size, - unsigned int __nocast gfp_mask, spinlock_t *lock) + gfp_t gfp_mask, spinlock_t *lock) { struct kfifo *fifo; @@ -64,7 +64,7 @@ EXPORT_SYMBOL(kfifo_init); * * The size will be rounded-up to a power of 2. */ -struct kfifo *kfifo_alloc(unsigned int size, unsigned int __nocast gfp_mask, spinlock_t *lock) +struct kfifo *kfifo_alloc(unsigned int size, gfp_t gfp_mask, spinlock_t *lock) { unsigned char *buffer; struct kfifo *ret; diff --git a/kernel/signal.c b/kernel/signal.c index c135f5a..cba193c 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -262,7 +262,7 @@ next_signal(struct sigpending *pending, sigset_t *mask) return sig; } -static struct sigqueue *__sigqueue_alloc(struct task_struct *t, unsigned int __nocast flags, +static struct sigqueue *__sigqueue_alloc(struct task_struct *t, gfp_t flags, int override_rlimit) { struct sigqueue *q = NULL; diff --git a/lib/radix-tree.c b/lib/radix-tree.c index 6a8bc6e..d1c057e7 100644 --- a/lib/radix-tree.c +++ b/lib/radix-tree.c @@ -110,7 +110,7 @@ radix_tree_node_free(struct radix_tree_node *node) * success, return zero, with preemption disabled. On error, return -ENOMEM * with preemption not disabled. */ -int radix_tree_preload(unsigned int __nocast gfp_mask) +int radix_tree_preload(gfp_t gfp_mask) { struct radix_tree_preload *rtp; struct radix_tree_node *node; diff --git a/lib/ts_bm.c b/lib/ts_bm.c index 1b61fce..8a8b3a1 100644 --- a/lib/ts_bm.c +++ b/lib/ts_bm.c @@ -127,7 +127,7 @@ static void compute_prefix_tbl(struct ts_bm *bm, const u8 *pattern, } static struct ts_config *bm_init(const void *pattern, unsigned int len, - unsigned int __nocast gfp_mask) + gfp_t gfp_mask) { struct ts_config *conf; struct ts_bm *bm; diff --git a/lib/ts_fsm.c b/lib/ts_fsm.c index ef9779e..ca32112 100644 --- a/lib/ts_fsm.c +++ b/lib/ts_fsm.c @@ -258,7 +258,7 @@ found_match: } static struct ts_config *fsm_init(const void *pattern, unsigned int len, - unsigned int __nocast gfp_mask) + gfp_t gfp_mask) { int i, err = -EINVAL; struct ts_config *conf; diff --git a/lib/ts_kmp.c b/lib/ts_kmp.c index e45f0f0..7fd4545 100644 --- a/lib/ts_kmp.c +++ b/lib/ts_kmp.c @@ -87,7 +87,7 @@ static inline void compute_prefix_tbl(const u8 *pattern, unsigned int len, } static struct ts_config *kmp_init(const void *pattern, unsigned int len, - unsigned int __nocast gfp_mask) + gfp_t gfp_mask) { struct ts_config *conf; struct ts_kmp *kmp; diff --git a/mm/highmem.c b/mm/highmem.c index 4009115..90e1861e 100644 --- a/mm/highmem.c +++ b/mm/highmem.c @@ -30,7 +30,7 @@ static mempool_t *page_pool, *isa_page_pool; -static void *page_pool_alloc(unsigned int __nocast gfp_mask, void *data) +static void *page_pool_alloc(gfp_t gfp_mask, void *data) { unsigned int gfp = gfp_mask | (unsigned int) (long) data; diff --git a/mm/mempolicy.c b/mm/mempolicy.c index 9033f08..37af443 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -687,7 +687,7 @@ get_vma_policy(struct task_struct *task, struct vm_area_struct *vma, unsigned lo } /* Return a zonelist representing a mempolicy */ -static struct zonelist *zonelist_policy(unsigned int __nocast gfp, struct mempolicy *policy) +static struct zonelist *zonelist_policy(gfp_t gfp, struct mempolicy *policy) { int nd; @@ -751,7 +751,7 @@ static unsigned offset_il_node(struct mempolicy *pol, /* Allocate a page in interleaved policy. Own path because it needs to do special accounting. */ -static struct page *alloc_page_interleave(unsigned int __nocast gfp, unsigned order, unsigned nid) +static struct page *alloc_page_interleave(gfp_t gfp, unsigned order, unsigned nid) { struct zonelist *zl; struct page *page; @@ -789,7 +789,7 @@ static struct page *alloc_page_interleave(unsigned int __nocast gfp, unsigned or * Should be called with the mm_sem of the vma hold. */ struct page * -alloc_page_vma(unsigned int __nocast gfp, struct vm_area_struct *vma, unsigned long addr) +alloc_page_vma(gfp_t gfp, struct vm_area_struct *vma, unsigned long addr) { struct mempolicy *pol = get_vma_policy(current, vma, addr); @@ -832,7 +832,7 @@ alloc_page_vma(unsigned int __nocast gfp, struct vm_area_struct *vma, unsigned l * 1) it's ok to take cpuset_sem (can WAIT), and * 2) allocating for current task (not interrupt). */ -struct page *alloc_pages_current(unsigned int __nocast gfp, unsigned order) +struct page *alloc_pages_current(gfp_t gfp, unsigned order) { struct mempolicy *pol = current->mempolicy; diff --git a/mm/mempool.c b/mm/mempool.c index 65f2957..9e377ea 100644 --- a/mm/mempool.c +++ b/mm/mempool.c @@ -112,7 +112,7 @@ EXPORT_SYMBOL(mempool_create_node); * while this function is running. mempool_alloc() & mempool_free() * might be called (eg. from IRQ contexts) while this function executes. */ -int mempool_resize(mempool_t *pool, int new_min_nr, unsigned int __nocast gfp_mask) +int mempool_resize(mempool_t *pool, int new_min_nr, gfp_t gfp_mask) { void *element; void **new_elements; @@ -200,7 +200,7 @@ EXPORT_SYMBOL(mempool_destroy); * *never* fails when called from process contexts. (it might * fail if called from an IRQ context.) */ -void * mempool_alloc(mempool_t *pool, unsigned int __nocast gfp_mask) +void * mempool_alloc(mempool_t *pool, gfp_t gfp_mask) { void *element; unsigned long flags; @@ -276,7 +276,7 @@ EXPORT_SYMBOL(mempool_free); /* * A commonly used alloc and free fn. */ -void *mempool_alloc_slab(unsigned int __nocast gfp_mask, void *pool_data) +void *mempool_alloc_slab(gfp_t gfp_mask, void *pool_data) { kmem_cache_t *mem = (kmem_cache_t *) pool_data; return kmem_cache_alloc(mem, gfp_mask); diff --git a/mm/nommu.c b/mm/nommu.c index 064d704..0ef241a 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -157,8 +157,7 @@ void vfree(void *addr) kfree(addr); } -void *__vmalloc(unsigned long size, unsigned int __nocast gfp_mask, - pgprot_t prot) +void *__vmalloc(unsigned long size, gfp_t gfp_mask, pgprot_t prot) { /* * kmalloc doesn't like __GFP_HIGHMEM for some reason diff --git a/mm/oom_kill.c b/mm/oom_kill.c index ac3bf33..d348b90 100644 --- a/mm/oom_kill.c +++ b/mm/oom_kill.c @@ -263,7 +263,7 @@ static struct mm_struct *oom_kill_process(struct task_struct *p) * OR try to be smart about which process to kill. Note that we * don't have to be perfect here, we just have to be good. */ -void out_of_memory(unsigned int __nocast gfp_mask, int order) +void out_of_memory(gfp_t gfp_mask, int order) { struct mm_struct *mm = NULL; task_t * p; diff --git a/mm/page_alloc.c b/mm/page_alloc.c index ae29033..cc1fe26 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -671,7 +671,7 @@ void fastcall free_cold_page(struct page *page) free_hot_cold_page(page, 1); } -static inline void prep_zero_page(struct page *page, int order, unsigned int __nocast gfp_flags) +static inline void prep_zero_page(struct page *page, int order, gfp_t gfp_flags) { int i; @@ -686,7 +686,7 @@ static inline void prep_zero_page(struct page *page, int order, unsigned int __n * or two. */ static struct page * -buffered_rmqueue(struct zone *zone, int order, unsigned int __nocast gfp_flags) +buffered_rmqueue(struct zone *zone, int order, gfp_t gfp_flags) { unsigned long flags; struct page *page = NULL; @@ -761,7 +761,7 @@ int zone_watermark_ok(struct zone *z, int order, unsigned long mark, } static inline int -should_reclaim_zone(struct zone *z, unsigned int gfp_mask) +should_reclaim_zone(struct zone *z, gfp_t gfp_mask) { if (!z->reclaim_pages) return 0; @@ -774,7 +774,7 @@ should_reclaim_zone(struct zone *z, unsigned int gfp_mask) * This is the 'heart' of the zoned buddy allocator. */ struct page * fastcall -__alloc_pages(unsigned int __nocast gfp_mask, unsigned int order, +__alloc_pages(gfp_t gfp_mask, unsigned int order, struct zonelist *zonelist) { const int wait = gfp_mask & __GFP_WAIT; @@ -977,7 +977,7 @@ EXPORT_SYMBOL(__alloc_pages); /* * Common helper functions. */ -fastcall unsigned long __get_free_pages(unsigned int __nocast gfp_mask, unsigned int order) +fastcall unsigned long __get_free_pages(gfp_t gfp_mask, unsigned int order) { struct page * page; page = alloc_pages(gfp_mask, order); @@ -988,7 +988,7 @@ fastcall unsigned long __get_free_pages(unsigned int __nocast gfp_mask, unsigned EXPORT_SYMBOL(__get_free_pages); -fastcall unsigned long get_zeroed_page(unsigned int __nocast gfp_mask) +fastcall unsigned long get_zeroed_page(gfp_t gfp_mask) { struct page * page; diff --git a/mm/page_io.c b/mm/page_io.c index 2e605a1..330e00d 100644 --- a/mm/page_io.c +++ b/mm/page_io.c @@ -19,7 +19,7 @@ #include #include -static struct bio *get_swap_bio(unsigned int __nocast gfp_flags, pgoff_t index, +static struct bio *get_swap_bio(gfp_t gfp_flags, pgoff_t index, struct page *page, bio_end_io_t end_io) { struct bio *bio; diff --git a/mm/shmem.c b/mm/shmem.c index 1f7aeb2..ea064d8 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -921,8 +921,7 @@ shmem_swapin(struct shmem_inode_info *info,swp_entry_t entry,unsigned long idx) } static inline struct page * -shmem_alloc_page(unsigned int __nocast gfp,struct shmem_inode_info *info, - unsigned long idx) +shmem_alloc_page(gfp_t gfp,struct shmem_inode_info *info, unsigned long idx) { return alloc_page(gfp | __GFP_ZERO); } diff --git a/mm/slab.c b/mm/slab.c index 5cbbdfa6..d05c678 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -650,8 +650,7 @@ static inline struct array_cache *ac_data(kmem_cache_t *cachep) return cachep->array[smp_processor_id()]; } -static inline kmem_cache_t *__find_general_cachep(size_t size, - unsigned int __nocast gfpflags) +static inline kmem_cache_t *__find_general_cachep(size_t size, gfp_t gfpflags) { struct cache_sizes *csizep = malloc_sizes; @@ -675,8 +674,7 @@ static inline kmem_cache_t *__find_general_cachep(size_t size, return csizep->cs_cachep; } -kmem_cache_t *kmem_find_general_cachep(size_t size, - unsigned int __nocast gfpflags) +kmem_cache_t *kmem_find_general_cachep(size_t size, gfp_t gfpflags) { return __find_general_cachep(size, gfpflags); } @@ -1185,7 +1183,7 @@ __initcall(cpucache_init); * did not request dmaable memory, we might get it, but that * would be relatively rare and ignorable. */ -static void *kmem_getpages(kmem_cache_t *cachep, unsigned int __nocast flags, int nodeid) +static void *kmem_getpages(kmem_cache_t *cachep, gfp_t flags, int nodeid) { struct page *page; void *addr; @@ -2048,7 +2046,7 @@ EXPORT_SYMBOL(kmem_cache_destroy); /* Get the memory for a slab management obj. */ static struct slab* alloc_slabmgmt(kmem_cache_t *cachep, void *objp, - int colour_off, unsigned int __nocast local_flags) + int colour_off, gfp_t local_flags) { struct slab *slabp; @@ -2149,7 +2147,7 @@ static void set_slab_attr(kmem_cache_t *cachep, struct slab *slabp, void *objp) * Grow (by 1) the number of slabs within a cache. This is called by * kmem_cache_alloc() when there are no active objs left in a cache. */ -static int cache_grow(kmem_cache_t *cachep, unsigned int __nocast flags, int nodeid) +static int cache_grow(kmem_cache_t *cachep, gfp_t flags, int nodeid) { struct slab *slabp; void *objp; @@ -2356,7 +2354,7 @@ bad: #define check_slabp(x,y) do { } while(0) #endif -static void *cache_alloc_refill(kmem_cache_t *cachep, unsigned int __nocast flags) +static void *cache_alloc_refill(kmem_cache_t *cachep, gfp_t flags) { int batchcount; struct kmem_list3 *l3; @@ -2456,7 +2454,7 @@ alloc_done: } static inline void -cache_alloc_debugcheck_before(kmem_cache_t *cachep, unsigned int __nocast flags) +cache_alloc_debugcheck_before(kmem_cache_t *cachep, gfp_t flags) { might_sleep_if(flags & __GFP_WAIT); #if DEBUG @@ -2467,7 +2465,7 @@ cache_alloc_debugcheck_before(kmem_cache_t *cachep, unsigned int __nocast flags) #if DEBUG static void * cache_alloc_debugcheck_after(kmem_cache_t *cachep, - unsigned int __nocast flags, void *objp, void *caller) + gfp_t flags, void *objp, void *caller) { if (!objp) return objp; @@ -2510,7 +2508,7 @@ cache_alloc_debugcheck_after(kmem_cache_t *cachep, #define cache_alloc_debugcheck_after(a,b,objp,d) (objp) #endif -static inline void *____cache_alloc(kmem_cache_t *cachep, unsigned int __nocast flags) +static inline void *____cache_alloc(kmem_cache_t *cachep, gfp_t flags) { void* objp; struct array_cache *ac; @@ -2528,7 +2526,7 @@ static inline void *____cache_alloc(kmem_cache_t *cachep, unsigned int __nocast return objp; } -static inline void *__cache_alloc(kmem_cache_t *cachep, unsigned int __nocast flags) +static inline void *__cache_alloc(kmem_cache_t *cachep, gfp_t flags) { unsigned long save_flags; void* objp; @@ -2787,7 +2785,7 @@ static inline void __cache_free(kmem_cache_t *cachep, void *objp) * Allocate an object from this cache. The flags are only relevant * if the cache has no available objects. */ -void *kmem_cache_alloc(kmem_cache_t *cachep, unsigned int __nocast flags) +void *kmem_cache_alloc(kmem_cache_t *cachep, gfp_t flags) { return __cache_alloc(cachep, flags); } @@ -2848,7 +2846,7 @@ out: * New and improved: it will now make sure that the object gets * put on the correct node list so that there is no false sharing. */ -void *kmem_cache_alloc_node(kmem_cache_t *cachep, unsigned int __nocast flags, int nodeid) +void *kmem_cache_alloc_node(kmem_cache_t *cachep, gfp_t flags, int nodeid) { unsigned long save_flags; void *ptr; @@ -2875,7 +2873,7 @@ void *kmem_cache_alloc_node(kmem_cache_t *cachep, unsigned int __nocast flags, i } EXPORT_SYMBOL(kmem_cache_alloc_node); -void *kmalloc_node(size_t size, unsigned int __nocast flags, int node) +void *kmalloc_node(size_t size, gfp_t flags, int node) { kmem_cache_t *cachep; @@ -2908,7 +2906,7 @@ EXPORT_SYMBOL(kmalloc_node); * platforms. For example, on i386, it means that the memory must come * from the first 16MB. */ -void *__kmalloc(size_t size, unsigned int __nocast flags) +void *__kmalloc(size_t size, gfp_t flags) { kmem_cache_t *cachep; @@ -2997,7 +2995,7 @@ EXPORT_SYMBOL(kmem_cache_free); * @size: how many bytes of memory are required. * @flags: the type of memory to allocate. */ -void *kzalloc(size_t size, unsigned int __nocast flags) +void *kzalloc(size_t size, gfp_t flags) { void *ret = kmalloc(size, flags); if (ret) @@ -3603,7 +3601,7 @@ unsigned int ksize(const void *objp) * @s: the string to duplicate * @gfp: the GFP mask used in the kmalloc() call when allocating memory */ -char *kstrdup(const char *s, unsigned int __nocast gfp) +char *kstrdup(const char *s, gfp_t gfp) { size_t len; char *buf; diff --git a/mm/swap_state.c b/mm/swap_state.c index adbc2b4..132164f 100644 --- a/mm/swap_state.c +++ b/mm/swap_state.c @@ -68,7 +68,7 @@ void show_swap_cache_info(void) * but sets SwapCache flag and private instead of mapping and index. */ static int __add_to_swap_cache(struct page *page, swp_entry_t entry, - unsigned int __nocast gfp_mask) + gfp_t gfp_mask) { int error; diff --git a/mm/vmalloc.c b/mm/vmalloc.c index 13c3d82..1150229 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -395,7 +395,7 @@ void *vmap(struct page **pages, unsigned int count, EXPORT_SYMBOL(vmap); -void *__vmalloc_area(struct vm_struct *area, unsigned int __nocast gfp_mask, pgprot_t prot) +void *__vmalloc_area(struct vm_struct *area, gfp_t gfp_mask, pgprot_t prot) { struct page **pages; unsigned int nr_pages, array_size, i; @@ -446,7 +446,7 @@ fail: * allocator with @gfp_mask flags. Map them into contiguous * kernel virtual space, using a pagetable protection of @prot. */ -void *__vmalloc(unsigned long size, unsigned int __nocast gfp_mask, pgprot_t prot) +void *__vmalloc(unsigned long size, gfp_t gfp_mask, pgprot_t prot) { struct vm_struct *area; diff --git a/net/atm/atm_misc.c b/net/atm/atm_misc.c index 71abc99..223c7ad 100644 --- a/net/atm/atm_misc.c +++ b/net/atm/atm_misc.c @@ -25,7 +25,7 @@ int atm_charge(struct atm_vcc *vcc,int truesize) struct sk_buff *atm_alloc_charge(struct atm_vcc *vcc,int pdu_size, - unsigned int __nocast gfp_flags) + gfp_t gfp_flags) { struct sock *sk = sk_atm(vcc); int guess = atm_guess_pdu2truesize(pdu_size); diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index d3d6bc5..59b2dd3 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -372,7 +372,7 @@ static struct proto l2cap_proto = { .obj_size = sizeof(struct l2cap_pinfo) }; -static struct sock *l2cap_sock_alloc(struct socket *sock, int proto, unsigned int __nocast prio) +static struct sock *l2cap_sock_alloc(struct socket *sock, int proto, gfp_t prio) { struct sock *sk; diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c index 173f46e..35adce6 100644 --- a/net/bluetooth/rfcomm/core.c +++ b/net/bluetooth/rfcomm/core.c @@ -229,7 +229,7 @@ static void rfcomm_dlc_clear_state(struct rfcomm_dlc *d) d->rx_credits = RFCOMM_DEFAULT_CREDITS; } -struct rfcomm_dlc *rfcomm_dlc_alloc(unsigned int __nocast prio) +struct rfcomm_dlc *rfcomm_dlc_alloc(gfp_t prio) { struct rfcomm_dlc *d = kmalloc(sizeof(*d), prio); if (!d) diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c index f49e7e9..a2b30f0 100644 --- a/net/bluetooth/rfcomm/sock.c +++ b/net/bluetooth/rfcomm/sock.c @@ -284,7 +284,7 @@ static struct proto rfcomm_proto = { .obj_size = sizeof(struct rfcomm_pinfo) }; -static struct sock *rfcomm_sock_alloc(struct socket *sock, int proto, unsigned int __nocast prio) +static struct sock *rfcomm_sock_alloc(struct socket *sock, int proto, gfp_t prio) { struct rfcomm_dlc *d; struct sock *sk; diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c index 1bca860..158a9c4 100644 --- a/net/bluetooth/rfcomm/tty.c +++ b/net/bluetooth/rfcomm/tty.c @@ -286,7 +286,7 @@ static inline void rfcomm_set_owner_w(struct sk_buff *skb, struct rfcomm_dev *de skb->destructor = rfcomm_wfree; } -static struct sk_buff *rfcomm_wmalloc(struct rfcomm_dev *dev, unsigned long size, unsigned int __nocast priority) +static struct sk_buff *rfcomm_wmalloc(struct rfcomm_dev *dev, unsigned long size, gfp_t priority) { if (atomic_read(&dev->wmem_alloc) < rfcomm_room(dev->dlc)) { struct sk_buff *skb = alloc_skb(size, priority); diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index ce7ab7d..997e42d 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -418,7 +418,7 @@ static struct proto sco_proto = { .obj_size = sizeof(struct sco_pinfo) }; -static struct sock *sco_sock_alloc(struct socket *sock, int proto, unsigned int __nocast prio) +static struct sock *sco_sock_alloc(struct socket *sock, int proto, gfp_t prio) { struct sock *sk; diff --git a/net/core/dev.c b/net/core/dev.c index 9066c87..a44eeef 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1132,7 +1132,7 @@ static inline int illegal_highdma(struct net_device *dev, struct sk_buff *skb) #endif /* Keep head the same: replace data */ -int __skb_linearize(struct sk_buff *skb, unsigned int __nocast gfp_mask) +int __skb_linearize(struct sk_buff *skb, gfp_t gfp_mask) { unsigned int size; u8 *data; diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 0e9431b..af9b151 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -130,7 +130,7 @@ void skb_under_panic(struct sk_buff *skb, int sz, void *here) * Buffers may only be allocated from interrupts using a @gfp_mask of * %GFP_ATOMIC. */ -struct sk_buff *__alloc_skb(unsigned int size, unsigned int __nocast gfp_mask, +struct sk_buff *__alloc_skb(unsigned int size, gfp_t gfp_mask, int fclone) { struct sk_buff *skb; @@ -198,7 +198,7 @@ nodata: */ struct sk_buff *alloc_skb_from_cache(kmem_cache_t *cp, unsigned int size, - unsigned int __nocast gfp_mask) + gfp_t gfp_mask) { struct sk_buff *skb; u8 *data; @@ -361,7 +361,7 @@ void __kfree_skb(struct sk_buff *skb) * %GFP_ATOMIC. */ -struct sk_buff *skb_clone(struct sk_buff *skb, unsigned int __nocast gfp_mask) +struct sk_buff *skb_clone(struct sk_buff *skb, gfp_t gfp_mask) { struct sk_buff *n; @@ -500,7 +500,7 @@ static void copy_skb_header(struct sk_buff *new, const struct sk_buff *old) * header is going to be modified. Use pskb_copy() instead. */ -struct sk_buff *skb_copy(const struct sk_buff *skb, unsigned int __nocast gfp_mask) +struct sk_buff *skb_copy(const struct sk_buff *skb, gfp_t gfp_mask) { int headerlen = skb->data - skb->head; /* @@ -539,7 +539,7 @@ struct sk_buff *skb_copy(const struct sk_buff *skb, unsigned int __nocast gfp_ma * The returned buffer has a reference count of 1. */ -struct sk_buff *pskb_copy(struct sk_buff *skb, unsigned int __nocast gfp_mask) +struct sk_buff *pskb_copy(struct sk_buff *skb, gfp_t gfp_mask) { /* * Allocate the copy buffer @@ -598,7 +598,7 @@ out: */ int pskb_expand_head(struct sk_buff *skb, int nhead, int ntail, - unsigned int __nocast gfp_mask) + gfp_t gfp_mask) { int i; u8 *data; @@ -689,7 +689,7 @@ struct sk_buff *skb_realloc_headroom(struct sk_buff *skb, unsigned int headroom) */ struct sk_buff *skb_copy_expand(const struct sk_buff *skb, int newheadroom, int newtailroom, - unsigned int __nocast gfp_mask) + gfp_t gfp_mask) { /* * Allocate the copy buffer diff --git a/net/core/sock.c b/net/core/sock.c index 928d2a1..1c52fe8 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -637,7 +637,7 @@ lenout: * @prot: struct proto associated with this new sock instance * @zero_it: if we should zero the newly allocated sock */ -struct sock *sk_alloc(int family, unsigned int __nocast priority, +struct sock *sk_alloc(int family, gfp_t priority, struct proto *prot, int zero_it) { struct sock *sk = NULL; @@ -704,7 +704,7 @@ void sk_free(struct sock *sk) module_put(owner); } -struct sock *sk_clone(const struct sock *sk, const unsigned int __nocast priority) +struct sock *sk_clone(const struct sock *sk, const gfp_t priority) { struct sock *newsk = sk_alloc(sk->sk_family, priority, sk->sk_prot, 0); @@ -845,7 +845,7 @@ unsigned long sock_i_ino(struct sock *sk) * Allocate a skb from the socket's send buffer. */ struct sk_buff *sock_wmalloc(struct sock *sk, unsigned long size, int force, - unsigned int __nocast priority) + gfp_t priority) { if (force || atomic_read(&sk->sk_wmem_alloc) < sk->sk_sndbuf) { struct sk_buff * skb = alloc_skb(size, priority); @@ -861,7 +861,7 @@ struct sk_buff *sock_wmalloc(struct sock *sk, unsigned long size, int force, * Allocate a skb from the socket's receive buffer. */ struct sk_buff *sock_rmalloc(struct sock *sk, unsigned long size, int force, - unsigned int __nocast priority) + gfp_t priority) { if (force || atomic_read(&sk->sk_rmem_alloc) < sk->sk_rcvbuf) { struct sk_buff *skb = alloc_skb(size, priority); @@ -876,7 +876,7 @@ struct sk_buff *sock_rmalloc(struct sock *sk, unsigned long size, int force, /* * Allocate a memory block from the socket's option memory buffer. */ -void *sock_kmalloc(struct sock *sk, int size, unsigned int __nocast priority) +void *sock_kmalloc(struct sock *sk, int size, gfp_t priority) { if ((unsigned)size <= sysctl_optmem_max && atomic_read(&sk->sk_omem_alloc) + size < sysctl_optmem_max) { diff --git a/net/dccp/ackvec.c b/net/dccp/ackvec.c index 6530283..c9a62cc 100644 --- a/net/dccp/ackvec.c +++ b/net/dccp/ackvec.c @@ -91,7 +91,7 @@ int dccp_insert_option_ackvec(struct sock *sk, struct sk_buff *skb) } struct dccp_ackvec *dccp_ackvec_alloc(const unsigned int len, - const unsigned int __nocast priority) + const gfp_t priority) { struct dccp_ackvec *av = kmalloc(sizeof(*av) + len, priority); diff --git a/net/dccp/ackvec.h b/net/dccp/ackvec.h index 8ca51c9..d0fd6c6 100644 --- a/net/dccp/ackvec.h +++ b/net/dccp/ackvec.h @@ -74,7 +74,7 @@ struct sk_buff; #ifdef CONFIG_IP_DCCP_ACKVEC extern struct dccp_ackvec *dccp_ackvec_alloc(unsigned int len, - const unsigned int __nocast priority); + const gfp_t priority); extern void dccp_ackvec_free(struct dccp_ackvec *av); extern int dccp_ackvec_add(struct dccp_ackvec *av, const struct sock *sk, @@ -93,7 +93,7 @@ static inline int dccp_ackvec_pending(const struct dccp_ackvec *av) } #else /* CONFIG_IP_DCCP_ACKVEC */ static inline struct dccp_ackvec *dccp_ackvec_alloc(unsigned int len, - const unsigned int __nocast priority) + const gfp_t priority) { return NULL; } diff --git a/net/dccp/ccids/lib/loss_interval.h b/net/dccp/ccids/lib/loss_interval.h index 13ad47b..417d9d8 100644 --- a/net/dccp/ccids/lib/loss_interval.h +++ b/net/dccp/ccids/lib/loss_interval.h @@ -36,7 +36,7 @@ struct dccp_li_hist_entry { static inline struct dccp_li_hist_entry * dccp_li_hist_entry_new(struct dccp_li_hist *hist, - const unsigned int __nocast prio) + const gfp_t prio) { return kmem_cache_alloc(hist->dccplih_slab, prio); } diff --git a/net/dccp/ccids/lib/packet_history.h b/net/dccp/ccids/lib/packet_history.h index b375ebd..122e967 100644 --- a/net/dccp/ccids/lib/packet_history.h +++ b/net/dccp/ccids/lib/packet_history.h @@ -86,7 +86,7 @@ extern struct dccp_rx_hist_entry * static inline struct dccp_tx_hist_entry * dccp_tx_hist_entry_new(struct dccp_tx_hist *hist, - const unsigned int __nocast prio) + const gfp_t prio) { struct dccp_tx_hist_entry *entry = kmem_cache_alloc(hist->dccptxh_slab, prio); @@ -137,7 +137,7 @@ static inline struct dccp_rx_hist_entry * const struct sock *sk, const u32 ndp, const struct sk_buff *skb, - const unsigned int __nocast prio) + const gfp_t prio) { struct dccp_rx_hist_entry *entry = kmem_cache_alloc(hist->dccprxh_slab, prio); diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c index 34d4128..1186dc4 100644 --- a/net/decnet/af_decnet.c +++ b/net/decnet/af_decnet.c @@ -452,8 +452,7 @@ static struct proto dn_proto = { .obj_size = sizeof(struct dn_sock), }; -static struct sock *dn_alloc_sock(struct socket *sock, - unsigned int __nocast gfp) +static struct sock *dn_alloc_sock(struct socket *sock, gfp_t gfp) { struct dn_scp *scp; struct sock *sk = sk_alloc(PF_DECnet, gfp, &dn_proto, 1); @@ -805,8 +804,7 @@ static int dn_auto_bind(struct socket *sock) return rv; } -static int dn_confirm_accept(struct sock *sk, long *timeo, - unsigned int __nocast allocation) +static int dn_confirm_accept(struct sock *sk, long *timeo, gfp_t allocation) { struct dn_scp *scp = DN_SK(sk); DEFINE_WAIT(wait); diff --git a/net/decnet/dn_nsp_out.c b/net/decnet/dn_nsp_out.c index cd08244..c96c767 100644 --- a/net/decnet/dn_nsp_out.c +++ b/net/decnet/dn_nsp_out.c @@ -117,8 +117,7 @@ try_again: * The eventual aim is for each socket to have a cached header size * for its outgoing packets, and to set hdr from this when sk != NULL. */ -struct sk_buff *dn_alloc_skb(struct sock *sk, int size, - unsigned int __nocast pri) +struct sk_buff *dn_alloc_skb(struct sock *sk, int size, gfp_t pri) { struct sk_buff *skb; int hdr = 64; @@ -212,7 +211,7 @@ static void dn_nsp_rtt(struct sock *sk, long rtt) * Returns: The number of times the packet has been sent previously */ static inline unsigned dn_nsp_clone_and_send(struct sk_buff *skb, - unsigned int __nocast gfp) + gfp_t gfp) { struct dn_skb_cb *cb = DN_SKB_CB(skb); struct sk_buff *skb2; @@ -353,7 +352,7 @@ static unsigned short *dn_nsp_mk_data_header(struct sock *sk, struct sk_buff *sk } void dn_nsp_queue_xmit(struct sock *sk, struct sk_buff *skb, - unsigned int __nocast gfp, int oth) + gfp_t gfp, int oth) { struct dn_scp *scp = DN_SK(sk); struct dn_skb_cb *cb = DN_SKB_CB(skb); @@ -520,7 +519,7 @@ static int dn_nsp_retrans_conn_conf(struct sock *sk) return 0; } -void dn_send_conn_conf(struct sock *sk, unsigned int __nocast gfp) +void dn_send_conn_conf(struct sock *sk, gfp_t gfp) { struct dn_scp *scp = DN_SK(sk); struct sk_buff *skb = NULL; @@ -552,7 +551,7 @@ void dn_send_conn_conf(struct sock *sk, unsigned int __nocast gfp) static __inline__ void dn_nsp_do_disc(struct sock *sk, unsigned char msgflg, - unsigned short reason, unsigned int __nocast gfp, + unsigned short reason, gfp_t gfp, struct dst_entry *dst, int ddl, unsigned char *dd, __u16 rem, __u16 loc) { @@ -595,7 +594,7 @@ static __inline__ void dn_nsp_do_disc(struct sock *sk, unsigned char msgflg, void dn_nsp_send_disc(struct sock *sk, unsigned char msgflg, - unsigned short reason, unsigned int __nocast gfp) + unsigned short reason, gfp_t gfp) { struct dn_scp *scp = DN_SK(sk); int ddl = 0; @@ -616,7 +615,7 @@ void dn_nsp_return_disc(struct sk_buff *skb, unsigned char msgflg, { struct dn_skb_cb *cb = DN_SKB_CB(skb); int ddl = 0; - unsigned int __nocast gfp = GFP_ATOMIC; + gfp_t gfp = GFP_ATOMIC; dn_nsp_do_disc(NULL, msgflg, reason, gfp, skb->dst, ddl, NULL, cb->src_port, cb->dst_port); @@ -628,7 +627,7 @@ void dn_nsp_send_link(struct sock *sk, unsigned char lsflags, char fcval) struct dn_scp *scp = DN_SK(sk); struct sk_buff *skb; unsigned char *ptr; - unsigned int __nocast gfp = GFP_ATOMIC; + gfp_t gfp = GFP_ATOMIC; if ((skb = dn_alloc_skb(sk, DN_MAX_NSP_DATA_HEADER + 2, gfp)) == NULL) return; @@ -663,8 +662,7 @@ void dn_nsp_send_conninit(struct sock *sk, unsigned char msgflg) unsigned char menuver; struct dn_skb_cb *cb; unsigned char type = 1; - unsigned int __nocast allocation = - (msgflg == NSP_CI) ? sk->sk_allocation : GFP_ATOMIC; + gfp_t allocation = (msgflg == NSP_CI) ? sk->sk_allocation : GFP_ATOMIC; struct sk_buff *skb = dn_alloc_skb(sk, 200, allocation); if (!skb) diff --git a/net/ieee80211/ieee80211_tx.c b/net/ieee80211/ieee80211_tx.c index ecdf9f7..eed07bb 100644 --- a/net/ieee80211/ieee80211_tx.c +++ b/net/ieee80211/ieee80211_tx.c @@ -207,7 +207,7 @@ void ieee80211_txb_free(struct ieee80211_txb *txb) } static struct ieee80211_txb *ieee80211_alloc_txb(int nr_frags, int txb_size, - unsigned int __nocast gfp_mask) + gfp_t gfp_mask) { struct ieee80211_txb *txb; int i; diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c index fe3c6d3..94468a7 100644 --- a/net/ipv4/inet_connection_sock.c +++ b/net/ipv4/inet_connection_sock.c @@ -494,7 +494,7 @@ void inet_csk_reqsk_queue_prune(struct sock *parent, EXPORT_SYMBOL_GPL(inet_csk_reqsk_queue_prune); struct sock *inet_csk_clone(struct sock *sk, const struct request_sock *req, - const unsigned int __nocast priority) + const gfp_t priority) { struct sock *newsk = sk_clone(sk, priority); diff --git a/net/ipv4/ipvs/ip_vs_app.c b/net/ipv4/ipvs/ip_vs_app.c index b942ff3..fc6f95a 100644 --- a/net/ipv4/ipvs/ip_vs_app.c +++ b/net/ipv4/ipvs/ip_vs_app.c @@ -604,7 +604,7 @@ static struct file_operations ip_vs_app_fops = { /* * Replace a segment of data with a new segment */ -int ip_vs_skb_replace(struct sk_buff *skb, unsigned int __nocast pri, +int ip_vs_skb_replace(struct sk_buff *skb, gfp_t pri, char *o_buf, int o_len, char *n_buf, int n_len) { struct iphdr *iph; diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index c5b911f..8225e42 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -1610,7 +1610,7 @@ void tcp_send_fin(struct sock *sk) * was unread data in the receive queue. This behavior is recommended * by draft-ietf-tcpimpl-prob-03.txt section 3.10. -DaveM */ -void tcp_send_active_reset(struct sock *sk, unsigned int __nocast priority) +void tcp_send_active_reset(struct sock *sk, gfp_t priority) { struct tcp_sock *tp = tcp_sk(sk); struct sk_buff *skb; diff --git a/net/key/af_key.c b/net/key/af_key.c index bbf0f69..3903168 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -185,7 +185,7 @@ static int pfkey_release(struct socket *sock) } static int pfkey_broadcast_one(struct sk_buff *skb, struct sk_buff **skb2, - unsigned int __nocast allocation, struct sock *sk) + gfp_t allocation, struct sock *sk) { int err = -ENOBUFS; @@ -217,7 +217,7 @@ static int pfkey_broadcast_one(struct sk_buff *skb, struct sk_buff **skb2, #define BROADCAST_ONE 1 #define BROADCAST_REGISTERED 2 #define BROADCAST_PROMISC_ONLY 4 -static int pfkey_broadcast(struct sk_buff *skb, unsigned int __nocast allocation, +static int pfkey_broadcast(struct sk_buff *skb, gfp_t allocation, int broadcast_flags, struct sock *one_sk) { struct sock *sk; @@ -1417,7 +1417,7 @@ static int pfkey_get(struct sock *sk, struct sk_buff *skb, struct sadb_msg *hdr, } static struct sk_buff *compose_sadb_supported(struct sadb_msg *orig, - unsigned int __nocast allocation) + gfp_t allocation) { struct sk_buff *skb; struct sadb_msg *hdr; diff --git a/net/llc/llc_conn.c b/net/llc/llc_conn.c index 042b24a..c761c15 100644 --- a/net/llc/llc_conn.c +++ b/net/llc/llc_conn.c @@ -867,8 +867,7 @@ static void llc_sk_init(struct sock* sk) * Allocates a LLC sock and initializes it. Returns the new LLC sock * or %NULL if there's no memory available for one */ -struct sock *llc_sk_alloc(int family, unsigned int __nocast priority, - struct proto *prot) +struct sock *llc_sk_alloc(int family, gfp_t priority, struct proto *prot) { struct sock *sk = sk_alloc(family, priority, prot, 1); diff --git a/net/netfilter/nfnetlink.c b/net/netfilter/nfnetlink.c index 34d6719..1caaca0 100644 --- a/net/netfilter/nfnetlink.c +++ b/net/netfilter/nfnetlink.c @@ -195,8 +195,7 @@ nfnetlink_check_attributes(struct nfnetlink_subsystem *subsys, int nfnetlink_send(struct sk_buff *skb, u32 pid, unsigned group, int echo) { - unsigned int __nocast allocation = - in_interrupt() ? GFP_ATOMIC : GFP_KERNEL; + gfp_t allocation = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL; int err = 0; NETLINK_CB(skb).dst_group = group; diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index a64e1d5..678c3f2 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -758,7 +758,7 @@ void netlink_detachskb(struct sock *sk, struct sk_buff *skb) } static inline struct sk_buff *netlink_trim(struct sk_buff *skb, - unsigned int __nocast allocation) + gfp_t allocation) { int delta; @@ -880,7 +880,7 @@ out: } int netlink_broadcast(struct sock *ssk, struct sk_buff *skb, u32 pid, - u32 group, unsigned int __nocast allocation) + u32 group, gfp_t allocation) { struct netlink_broadcast_data info; struct hlist_node *node; diff --git a/net/rxrpc/call.c b/net/rxrpc/call.c index 86f7770..c4aeb7d 100644 --- a/net/rxrpc/call.c +++ b/net/rxrpc/call.c @@ -1923,7 +1923,7 @@ int rxrpc_call_write_data(struct rxrpc_call *call, size_t sioc, struct kvec *siov, u8 rxhdr_flags, - unsigned int __nocast alloc_flags, + gfp_t alloc_flags, int dup_data, size_t *size_sent) { diff --git a/net/rxrpc/connection.c b/net/rxrpc/connection.c index be4b2be..2ba14a7 100644 --- a/net/rxrpc/connection.c +++ b/net/rxrpc/connection.c @@ -522,7 +522,7 @@ int rxrpc_conn_newmsg(struct rxrpc_connection *conn, uint8_t type, int dcount, struct kvec diov[], - unsigned int __nocast alloc_flags, + gfp_t alloc_flags, struct rxrpc_message **_msg) { struct rxrpc_message *msg; diff --git a/net/sctp/associola.c b/net/sctp/associola.c index 5b24ae0..12b0f58 100644 --- a/net/sctp/associola.c +++ b/net/sctp/associola.c @@ -71,7 +71,7 @@ static struct sctp_association *sctp_association_init(struct sctp_association *a const struct sctp_endpoint *ep, const struct sock *sk, sctp_scope_t scope, - unsigned int __nocast gfp) + gfp_t gfp) { struct sctp_sock *sp; int i; @@ -273,7 +273,7 @@ fail_init: struct sctp_association *sctp_association_new(const struct sctp_endpoint *ep, const struct sock *sk, sctp_scope_t scope, - unsigned int __nocast gfp) + gfp_t gfp) { struct sctp_association *asoc; @@ -479,7 +479,7 @@ void sctp_assoc_rm_peer(struct sctp_association *asoc, /* Add a transport address to an association. */ struct sctp_transport *sctp_assoc_add_peer(struct sctp_association *asoc, const union sctp_addr *addr, - const unsigned int __nocast gfp, + const gfp_t gfp, const int peer_state) { struct sctp_transport *peer; @@ -1231,7 +1231,7 @@ void sctp_assoc_rwnd_decrease(struct sctp_association *asoc, unsigned len) * local endpoint and the remote peer. */ int sctp_assoc_set_bind_addr_from_ep(struct sctp_association *asoc, - unsigned int __nocast gfp) + gfp_t gfp) { sctp_scope_t scope; int flags; @@ -1254,7 +1254,7 @@ int sctp_assoc_set_bind_addr_from_ep(struct sctp_association *asoc, /* Build the association's bind address list from the cookie. */ int sctp_assoc_set_bind_addr_from_cookie(struct sctp_association *asoc, struct sctp_cookie *cookie, - unsigned int __nocast gfp) + gfp_t gfp) { int var_size2 = ntohs(cookie->peer_init->chunk_hdr.length); int var_size3 = cookie->raw_addr_list_len; diff --git a/net/sctp/bind_addr.c b/net/sctp/bind_addr.c index f715497..2b96262 100644 --- a/net/sctp/bind_addr.c +++ b/net/sctp/bind_addr.c @@ -53,7 +53,7 @@ /* Forward declarations for internal helpers. */ static int sctp_copy_one_addr(struct sctp_bind_addr *, union sctp_addr *, - sctp_scope_t scope, unsigned int __nocast gfp, + sctp_scope_t scope, gfp_t gfp, int flags); static void sctp_bind_addr_clean(struct sctp_bind_addr *); @@ -64,7 +64,7 @@ static void sctp_bind_addr_clean(struct sctp_bind_addr *); */ int sctp_bind_addr_copy(struct sctp_bind_addr *dest, const struct sctp_bind_addr *src, - sctp_scope_t scope, unsigned int __nocast gfp, + sctp_scope_t scope, gfp_t gfp, int flags) { struct sctp_sockaddr_entry *addr; @@ -146,7 +146,7 @@ void sctp_bind_addr_free(struct sctp_bind_addr *bp) /* Add an address to the bind address list in the SCTP_bind_addr structure. */ int sctp_add_bind_addr(struct sctp_bind_addr *bp, union sctp_addr *new, - unsigned int __nocast gfp) + gfp_t gfp) { struct sctp_sockaddr_entry *addr; @@ -200,7 +200,7 @@ int sctp_del_bind_addr(struct sctp_bind_addr *bp, union sctp_addr *del_addr) */ union sctp_params sctp_bind_addrs_to_raw(const struct sctp_bind_addr *bp, int *addrs_len, - unsigned int __nocast gfp) + gfp_t gfp) { union sctp_params addrparms; union sctp_params retval; @@ -252,7 +252,7 @@ end_raw: * address parameters). */ int sctp_raw_to_bind_addrs(struct sctp_bind_addr *bp, __u8 *raw_addr_list, - int addrs_len, __u16 port, unsigned int __nocast gfp) + int addrs_len, __u16 port, gfp_t gfp) { union sctp_addr_param *rawaddr; struct sctp_paramhdr *param; @@ -350,7 +350,7 @@ union sctp_addr *sctp_find_unmatch_addr(struct sctp_bind_addr *bp, /* Copy out addresses from the global local address list. */ static int sctp_copy_one_addr(struct sctp_bind_addr *dest, union sctp_addr *addr, - sctp_scope_t scope, unsigned int __nocast gfp, + sctp_scope_t scope, gfp_t gfp, int flags) { int error = 0; diff --git a/net/sctp/chunk.c b/net/sctp/chunk.c index 61da293..83ef411 100644 --- a/net/sctp/chunk.c +++ b/net/sctp/chunk.c @@ -62,7 +62,7 @@ static void sctp_datamsg_init(struct sctp_datamsg *msg) } /* Allocate and initialize datamsg. */ -SCTP_STATIC struct sctp_datamsg *sctp_datamsg_new(unsigned int __nocast gfp) +SCTP_STATIC struct sctp_datamsg *sctp_datamsg_new(gfp_t gfp) { struct sctp_datamsg *msg; msg = kmalloc(sizeof(struct sctp_datamsg), gfp); diff --git a/net/sctp/endpointola.c b/net/sctp/endpointola.c index e22ccd6..96984f7 100644 --- a/net/sctp/endpointola.c +++ b/net/sctp/endpointola.c @@ -68,7 +68,7 @@ static void sctp_endpoint_bh_rcv(struct sctp_endpoint *ep); */ static struct sctp_endpoint *sctp_endpoint_init(struct sctp_endpoint *ep, struct sock *sk, - unsigned int __nocast gfp) + gfp_t gfp) { struct sctp_sock *sp = sctp_sk(sk); memset(ep, 0, sizeof(struct sctp_endpoint)); @@ -138,8 +138,7 @@ static struct sctp_endpoint *sctp_endpoint_init(struct sctp_endpoint *ep, /* Create a sctp_endpoint with all that boring stuff initialized. * Returns NULL if there isn't enough memory. */ -struct sctp_endpoint *sctp_endpoint_new(struct sock *sk, - unsigned int __nocast gfp) +struct sctp_endpoint *sctp_endpoint_new(struct sock *sk, gfp_t gfp) { struct sctp_endpoint *ep; diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index f01d1c9..26de4d3 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -219,7 +219,7 @@ static void sctp_free_local_addr_list(void) /* Copy the local addresses which are valid for 'scope' into 'bp'. */ int sctp_copy_local_addr_list(struct sctp_bind_addr *bp, sctp_scope_t scope, - unsigned int __nocast gfp, int copy_flags) + gfp_t gfp, int copy_flags) { struct sctp_sockaddr_entry *addr; int error = 0; diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c index 3868a8d..10e82ec 100644 --- a/net/sctp/sm_make_chunk.c +++ b/net/sctp/sm_make_chunk.c @@ -78,7 +78,7 @@ static sctp_cookie_param_t *sctp_pack_cookie(const struct sctp_endpoint *ep, static int sctp_process_param(struct sctp_association *asoc, union sctp_params param, const union sctp_addr *peer_addr, - unsigned int __nocast gfp); + gfp_t gfp); /* What was the inbound interface for this chunk? */ int sctp_chunk_iif(const struct sctp_chunk *chunk) @@ -174,7 +174,7 @@ void sctp_init_cause(struct sctp_chunk *chunk, __u16 cause_code, */ struct sctp_chunk *sctp_make_init(const struct sctp_association *asoc, const struct sctp_bind_addr *bp, - unsigned int __nocast gfp, int vparam_len) + gfp_t gfp, int vparam_len) { sctp_inithdr_t init; union sctp_params addrs; @@ -261,7 +261,7 @@ nodata: struct sctp_chunk *sctp_make_init_ack(const struct sctp_association *asoc, const struct sctp_chunk *chunk, - unsigned int __nocast gfp, int unkparam_len) + gfp_t gfp, int unkparam_len) { sctp_inithdr_t initack; struct sctp_chunk *retval; @@ -1234,7 +1234,7 @@ void sctp_chunk_assign_tsn(struct sctp_chunk *chunk) /* Create a CLOSED association to use with an incoming packet. */ struct sctp_association *sctp_make_temp_asoc(const struct sctp_endpoint *ep, struct sctp_chunk *chunk, - unsigned int __nocast gfp) + gfp_t gfp) { struct sctp_association *asoc; struct sk_buff *skb; @@ -1349,7 +1349,7 @@ nodata: struct sctp_association *sctp_unpack_cookie( const struct sctp_endpoint *ep, const struct sctp_association *asoc, - struct sctp_chunk *chunk, unsigned int __nocast gfp, + struct sctp_chunk *chunk, gfp_t gfp, int *error, struct sctp_chunk **errp) { struct sctp_association *retval = NULL; @@ -1814,7 +1814,7 @@ int sctp_verify_init(const struct sctp_association *asoc, */ int sctp_process_init(struct sctp_association *asoc, sctp_cid_t cid, const union sctp_addr *peer_addr, - sctp_init_chunk_t *peer_init, unsigned int __nocast gfp) + sctp_init_chunk_t *peer_init, gfp_t gfp) { union sctp_params param; struct sctp_transport *transport; @@ -1985,7 +1985,7 @@ nomem: static int sctp_process_param(struct sctp_association *asoc, union sctp_params param, const union sctp_addr *peer_addr, - unsigned int __nocast gfp) + gfp_t gfp) { union sctp_addr addr; int i; diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c index 39c970b..f84173e 100644 --- a/net/sctp/sm_sideeffect.c +++ b/net/sctp/sm_sideeffect.c @@ -63,7 +63,7 @@ static int sctp_cmd_interpreter(sctp_event_t event_type, void *event_arg, sctp_disposition_t status, sctp_cmd_seq_t *commands, - unsigned int __nocast gfp); + gfp_t gfp); static int sctp_side_effects(sctp_event_t event_type, sctp_subtype_t subtype, sctp_state_t state, struct sctp_endpoint *ep, @@ -71,7 +71,7 @@ static int sctp_side_effects(sctp_event_t event_type, sctp_subtype_t subtype, void *event_arg, sctp_disposition_t status, sctp_cmd_seq_t *commands, - unsigned int __nocast gfp); + gfp_t gfp); /******************************************************************** * Helper functions @@ -498,7 +498,7 @@ static int sctp_cmd_process_init(sctp_cmd_seq_t *commands, struct sctp_association *asoc, struct sctp_chunk *chunk, sctp_init_chunk_t *peer_init, - unsigned int __nocast gfp) + gfp_t gfp) { int error; @@ -853,7 +853,7 @@ int sctp_do_sm(sctp_event_t event_type, sctp_subtype_t subtype, struct sctp_endpoint *ep, struct sctp_association *asoc, void *event_arg, - unsigned int __nocast gfp) + gfp_t gfp) { sctp_cmd_seq_t commands; const sctp_sm_table_entry_t *state_fn; @@ -898,7 +898,7 @@ static int sctp_side_effects(sctp_event_t event_type, sctp_subtype_t subtype, void *event_arg, sctp_disposition_t status, sctp_cmd_seq_t *commands, - unsigned int __nocast gfp) + gfp_t gfp) { int error; @@ -986,7 +986,7 @@ static int sctp_cmd_interpreter(sctp_event_t event_type, void *event_arg, sctp_disposition_t status, sctp_cmd_seq_t *commands, - unsigned int __nocast gfp) + gfp_t gfp) { int error = 0; int force; diff --git a/net/sctp/ssnmap.c b/net/sctp/ssnmap.c index 25037da..cbe2513 100644 --- a/net/sctp/ssnmap.c +++ b/net/sctp/ssnmap.c @@ -58,7 +58,7 @@ static inline size_t sctp_ssnmap_size(__u16 in, __u16 out) * Allocate room to store at least 'len' contiguous TSNs. */ struct sctp_ssnmap *sctp_ssnmap_new(__u16 in, __u16 out, - unsigned int __nocast gfp) + gfp_t gfp) { struct sctp_ssnmap *retval; int size; diff --git a/net/sctp/transport.c b/net/sctp/transport.c index d2f04eb..6bc2720 100644 --- a/net/sctp/transport.c +++ b/net/sctp/transport.c @@ -57,7 +57,7 @@ /* Initialize a new transport from provided memory. */ static struct sctp_transport *sctp_transport_init(struct sctp_transport *peer, const union sctp_addr *addr, - unsigned int __nocast gfp) + gfp_t gfp) { /* Copy in the address. */ peer->ipaddr = *addr; @@ -122,7 +122,7 @@ static struct sctp_transport *sctp_transport_init(struct sctp_transport *peer, /* Allocate and initialize a new transport. */ struct sctp_transport *sctp_transport_new(const union sctp_addr *addr, - unsigned int __nocast gfp) + gfp_t gfp) { struct sctp_transport *transport; diff --git a/net/sctp/ulpevent.c b/net/sctp/ulpevent.c index 0abd510..057e7fa 100644 --- a/net/sctp/ulpevent.c +++ b/net/sctp/ulpevent.c @@ -74,7 +74,7 @@ SCTP_STATIC void sctp_ulpevent_init(struct sctp_ulpevent *event, int msg_flags) /* Create a new sctp_ulpevent. */ SCTP_STATIC struct sctp_ulpevent *sctp_ulpevent_new(int size, int msg_flags, - unsigned int __nocast gfp) + gfp_t gfp) { struct sctp_ulpevent *event; struct sk_buff *skb; @@ -136,7 +136,7 @@ static inline void sctp_ulpevent_release_owner(struct sctp_ulpevent *event) struct sctp_ulpevent *sctp_ulpevent_make_assoc_change( const struct sctp_association *asoc, __u16 flags, __u16 state, __u16 error, __u16 outbound, - __u16 inbound, unsigned int __nocast gfp) + __u16 inbound, gfp_t gfp) { struct sctp_ulpevent *event; struct sctp_assoc_change *sac; @@ -237,7 +237,7 @@ fail: struct sctp_ulpevent *sctp_ulpevent_make_peer_addr_change( const struct sctp_association *asoc, const struct sockaddr_storage *aaddr, - int flags, int state, int error, unsigned int __nocast gfp) + int flags, int state, int error, gfp_t gfp) { struct sctp_ulpevent *event; struct sctp_paddr_change *spc; @@ -350,7 +350,7 @@ fail: */ struct sctp_ulpevent *sctp_ulpevent_make_remote_error( const struct sctp_association *asoc, struct sctp_chunk *chunk, - __u16 flags, unsigned int __nocast gfp) + __u16 flags, gfp_t gfp) { struct sctp_ulpevent *event; struct sctp_remote_error *sre; @@ -448,7 +448,7 @@ fail: */ struct sctp_ulpevent *sctp_ulpevent_make_send_failed( const struct sctp_association *asoc, struct sctp_chunk *chunk, - __u16 flags, __u32 error, unsigned int __nocast gfp) + __u16 flags, __u32 error, gfp_t gfp) { struct sctp_ulpevent *event; struct sctp_send_failed *ssf; @@ -557,7 +557,7 @@ fail: */ struct sctp_ulpevent *sctp_ulpevent_make_shutdown_event( const struct sctp_association *asoc, - __u16 flags, unsigned int __nocast gfp) + __u16 flags, gfp_t gfp) { struct sctp_ulpevent *event; struct sctp_shutdown_event *sse; @@ -620,7 +620,7 @@ fail: * 5.3.1.6 SCTP_ADAPTION_INDICATION */ struct sctp_ulpevent *sctp_ulpevent_make_adaption_indication( - const struct sctp_association *asoc, unsigned int __nocast gfp) + const struct sctp_association *asoc, gfp_t gfp) { struct sctp_ulpevent *event; struct sctp_adaption_event *sai; @@ -657,7 +657,7 @@ fail: */ struct sctp_ulpevent *sctp_ulpevent_make_rcvmsg(struct sctp_association *asoc, struct sctp_chunk *chunk, - unsigned int __nocast gfp) + gfp_t gfp) { struct sctp_ulpevent *event = NULL; struct sk_buff *skb; @@ -719,7 +719,7 @@ fail: */ struct sctp_ulpevent *sctp_ulpevent_make_pdapi( const struct sctp_association *asoc, __u32 indication, - unsigned int __nocast gfp) + gfp_t gfp) { struct sctp_ulpevent *event; struct sctp_pdapi_event *pd; diff --git a/net/sctp/ulpqueue.c b/net/sctp/ulpqueue.c index ec2c857..2080b2d 100644 --- a/net/sctp/ulpqueue.c +++ b/net/sctp/ulpqueue.c @@ -100,7 +100,7 @@ void sctp_ulpq_free(struct sctp_ulpq *ulpq) /* Process an incoming DATA chunk. */ int sctp_ulpq_tail_data(struct sctp_ulpq *ulpq, struct sctp_chunk *chunk, - unsigned int __nocast gfp) + gfp_t gfp) { struct sk_buff_head temp; sctp_data_chunk_t *hdr; @@ -792,7 +792,7 @@ static __u16 sctp_ulpq_renege_frags(struct sctp_ulpq *ulpq, __u16 needed) /* Partial deliver the first message as there is pressure on rwnd. */ void sctp_ulpq_partial_delivery(struct sctp_ulpq *ulpq, struct sctp_chunk *chunk, - unsigned int __nocast gfp) + gfp_t gfp) { struct sctp_ulpevent *event; struct sctp_association *asoc; @@ -816,7 +816,7 @@ void sctp_ulpq_partial_delivery(struct sctp_ulpq *ulpq, /* Renege some packets to make room for an incoming chunk. */ void sctp_ulpq_renege(struct sctp_ulpq *ulpq, struct sctp_chunk *chunk, - unsigned int __nocast gfp) + gfp_t gfp) { struct sctp_association *asoc; __u16 needed, freed; @@ -855,7 +855,7 @@ void sctp_ulpq_renege(struct sctp_ulpq *ulpq, struct sctp_chunk *chunk, /* Notify the application if an association is aborted and in * partial delivery mode. Send up any pending received messages. */ -void sctp_ulpq_abort_pd(struct sctp_ulpq *ulpq, unsigned int __nocast gfp) +void sctp_ulpq_abort_pd(struct sctp_ulpq *ulpq, gfp_t gfp) { struct sctp_ulpevent *ev = NULL; struct sock *sk; diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c index ade730e..54e60a6 100644 --- a/net/sunrpc/sched.c +++ b/net/sunrpc/sched.c @@ -719,7 +719,7 @@ static void rpc_async_schedule(void *arg) void * rpc_malloc(struct rpc_task *task, size_t size) { - unsigned int __nocast gfp; + gfp_t gfp; if (task->tk_flags & RPC_TASK_SWAPPER) gfp = GFP_ATOMIC; diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index 061b44c..cbb0ba3 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -225,7 +225,7 @@ expired: * SPD calls. */ -struct xfrm_policy *xfrm_policy_alloc(unsigned int __nocast gfp) +struct xfrm_policy *xfrm_policy_alloc(gfp_t gfp) { struct xfrm_policy *policy; diff --git a/sound/core/memalloc.c b/sound/core/memalloc.c index 91124dd..e72cec7 100644 --- a/sound/core/memalloc.c +++ b/sound/core/memalloc.c @@ -106,7 +106,7 @@ struct snd_mem_list { static void *snd_dma_hack_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, - unsigned int __nocast flags) + gfp_t flags) { void *ret; u64 dma_mask, coherent_dma_mask; diff --git a/sound/core/memory.c b/sound/core/memory.c index 8fa888f..7d8e2ee 100644 --- a/sound/core/memory.c +++ b/sound/core/memory.c @@ -89,7 +89,7 @@ void snd_memory_done(void) } } -static void *__snd_kmalloc(size_t size, unsigned int __nocast flags, void *caller) +static void *__snd_kmalloc(size_t size, gfp_t flags, void *caller) { unsigned long cpu_flags; struct snd_alloc_track *t; @@ -111,12 +111,12 @@ static void *__snd_kmalloc(size_t size, unsigned int __nocast flags, void *calle } #define _snd_kmalloc(size, flags) __snd_kmalloc((size), (flags), __builtin_return_address(0)); -void *snd_hidden_kmalloc(size_t size, unsigned int __nocast flags) +void *snd_hidden_kmalloc(size_t size, gfp_t flags) { return _snd_kmalloc(size, flags); } -void *snd_hidden_kzalloc(size_t size, unsigned int __nocast flags) +void *snd_hidden_kzalloc(size_t size, gfp_t flags) { void *ret = _snd_kmalloc(size, flags); if (ret) @@ -125,7 +125,7 @@ void *snd_hidden_kzalloc(size_t size, unsigned int __nocast flags) } EXPORT_SYMBOL(snd_hidden_kzalloc); -void *snd_hidden_kcalloc(size_t n, size_t size, unsigned int __nocast flags) +void *snd_hidden_kcalloc(size_t n, size_t size, gfp_t flags) { void *ret = NULL; if (n != 0 && size > INT_MAX / n) @@ -190,7 +190,7 @@ void snd_hidden_vfree(void *obj) snd_wrapper_vfree(obj); } -char *snd_hidden_kstrdup(const char *s, unsigned int __nocast flags) +char *snd_hidden_kstrdup(const char *s, gfp_t flags) { int len; char *buf; diff --git a/sound/core/seq/instr/ainstr_iw.c b/sound/core/seq/instr/ainstr_iw.c index b3cee09..67c24c8 100644 --- a/sound/core/seq/instr/ainstr_iw.c +++ b/sound/core/seq/instr/ainstr_iw.c @@ -58,7 +58,7 @@ static int snd_seq_iwffff_copy_env_from_stream(__u32 req_stype, iwffff_xenv_t *ex, char __user **data, long *len, - unsigned int __nocast gfp_mask) + gfp_t gfp_mask) { __u32 stype; iwffff_env_record_t *rp, *rp_last; diff --git a/sound/core/wrappers.c b/sound/core/wrappers.c index 508e6d6..296b716 100644 --- a/sound/core/wrappers.c +++ b/sound/core/wrappers.c @@ -27,7 +27,7 @@ #include #ifdef CONFIG_SND_DEBUG_MEMORY -void *snd_wrapper_kmalloc(size_t size, unsigned int __nocast flags) +void *snd_wrapper_kmalloc(size_t size, gfp_t flags) { return kmalloc(size, flags); } -- cgit v0.10.2 From 2e457ef667158840c1be511f5d10dd42c6dbbe46 Mon Sep 17 00:00:00 2001 From: Sven Hartge Date: Sat, 8 Oct 2005 21:12:04 -0700 Subject: [SPARC64]: Fix compile error in irq.c irq.c is missing the inclusion of asm/io.h, which causes readb() and writeb() the be undefined. Signed-off-by: Sven Hartge Signed-off-by: David S. Miller diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index c9b6916..233526b 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include #include -- cgit v0.10.2 From ce80cc14810fbd78fa70c15c7e16a0b26d462fc6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 10 Oct 2005 09:48:10 +0100 Subject: [ARM] Update mach-types Signed-off-by: Russell King diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 6d3a79e..ae7c64b 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -2,11 +2,17 @@ # # This file is linux/arch/arm/tools/mach-types # +# Up to date versions of this file can be obtained from: +# +# http://www.arm.linux.org.uk/developer/machines/?action=download +# # Please do not send patches to this file; it is automatically generated! # To add an entry into this database, please see Documentation/arm/README, -# or contact rmk@arm.linux.org.uk +# or visit: +# +# http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Thu Jun 23 20:19:33 2005 +# Last update: Mon Oct 10 09:46:25 2005 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -421,7 +427,7 @@ mt02 MACH_MT02 MT02 410 mport3s MACH_MPORT3S MPORT3S 411 ra_alpha MACH_RA_ALPHA RA_ALPHA 412 xcep MACH_XCEP XCEP 413 -arcom_mercury MACH_ARCOM_MERCURY ARCOM_MERCURY 414 +arcom_vulcan MACH_ARCOM_VULCAN ARCOM_VULCAN 414 stargate MACH_STARGATE STARGATE 415 armadilloj MACH_ARMADILLOJ ARMADILLOJ 416 elroy_jack MACH_ELROY_JACK ELROY_JACK 417 @@ -454,7 +460,7 @@ esl_sarva MACH_ESL_SARVA ESL_SARVA 443 xm250 MACH_XM250 XM250 444 t6tc1xb MACH_T6TC1XB T6TC1XB 445 ess710 MACH_ESS710 ESS710 446 -mx3ads MACH_MX3ADS MX3ADS 447 +mx31ads MACH_MX3ADS MX3ADS 447 himalaya MACH_HIMALAYA HIMALAYA 448 bolfenk MACH_BOLFENK BOLFENK 449 at91rm9200kr MACH_AT91RM9200KR AT91RM9200KR 450 @@ -787,3 +793,79 @@ ez_ixp42x MACH_EZ_IXP42X EZ_IXP42X 778 tapwave_zodiac MACH_TAPWAVE_ZODIAC TAPWAVE_ZODIAC 779 universalmeter MACH_UNIVERSALMETER UNIVERSALMETER 780 hicoarm9 MACH_HICOARM9 HICOARM9 781 +pnx4008 MACH_PNX4008 PNX4008 782 +kws6000 MACH_KWS6000 KWS6000 783 +portux920t MACH_PORTUX920T PORTUX920T 784 +ez_x5 MACH_EZ_X5 EZ_X5 785 +omap_rudolph MACH_OMAP_RUDOLPH OMAP_RUDOLPH 786 +cpuat91 MACH_CPUAT91 CPUAT91 787 +rea9200 MACH_REA9200 REA9200 788 +acts_pune_sa1110 MACH_ACTS_PUNE_SA1110 ACTS_PUNE_SA1110 789 +ixp425 MACH_IXP425 IXP425 790 +argonplusodyssey MACH_ODYSSEY ODYSSEY 791 +perch MACH_PERCH PERCH 792 +eis05r1 MACH_EIS05R1 EIS05R1 793 +pepperpad MACH_PEPPERPAD PEPPERPAD 794 +sb3010 MACH_SB3010 SB3010 795 +rm9200 MACH_RM9200 RM9200 796 +dma03 MACH_DMA03 DMA03 797 +road_s101 MACH_ROAD_S101 ROAD_S101 798 +iq_nextgen_a MACH_IQ_NEXTGEN_A IQ_NEXTGEN_A 799 +iq_nextgen_b MACH_IQ_NEXTGEN_B IQ_NEXTGEN_B 800 +iq_nextgen_c MACH_IQ_NEXTGEN_C IQ_NEXTGEN_C 801 +iq_nextgen_d MACH_IQ_NEXTGEN_D IQ_NEXTGEN_D 802 +iq_nextgen_e MACH_IQ_NEXTGEN_E IQ_NEXTGEN_E 803 +mallow_at91 MACH_MALLOW_AT91 MALLOW_AT91 804 +cybertracker MACH_CYBERTRACKER CYBERTRACKER 805 +gesbc931x MACH_GESBC931X GESBC931X 806 +centipad MACH_CENTIPAD CENTIPAD 807 +armsoc MACH_ARMSOC ARMSOC 808 +se4200 MACH_SE4200 SE4200 809 +ems197a MACH_EMS197A EMS197A 810 +micro9 MACH_MICRO9 MICRO9 811 +micro9l MACH_MICRO9L MICRO9L 812 +uc5471dsp MACH_UC5471DSP UC5471DSP 813 +sj5471eng MACH_SJ5471ENG SJ5471ENG 814 +none MACH_CMPXA26X CMPXA26X 815 +nc MACH_NC NC 816 +omap_palmte MACH_OMAP_PALMTE OMAP_PALMTE 817 +ajax52x MACH_AJAX52X AJAX52X 818 +siriustar MACH_SIRIUSTAR SIRIUSTAR 819 +iodata_hdlg MACH_IODATA_HDLG IODATA_HDLG 820 +at91rm9200utl MACH_AT91RM9200UTL AT91RM9200UTL 821 +biosafe MACH_BIOSAFE BIOSAFE 822 +mp1000 MACH_MP1000 MP1000 823 +parsy MACH_PARSY PARSY 824 +ccxp270 MACH_CCXP CCXP 825 +omap_gsample MACH_OMAP_GSAMPLE OMAP_GSAMPLE 826 +realview_eb MACH_REALVIEW_EB REALVIEW_EB 827 +samoa MACH_SAMOA SAMOA 828 +t3xscale MACH_T3XSCALE T3XSCALE 829 +i878 MACH_I878 I878 830 +borzoi MACH_BORZOI BORZOI 831 +gecko MACH_GECKO GECKO 832 +ds101 MACH_DS101 DS101 833 +omap_palmtt2 MACH_OMAP_PALMTT2 OMAP_PALMTT2 834 +xscale_palmld MACH_XSCALE_PALMLD XSCALE_PALMLD 835 +cc9c MACH_CC9C CC9C 836 +sbc1670 MACH_SBC1670 SBC1670 837 +ixdp28x5 MACH_IXDP28X5 IXDP28X5 838 +omap_palmtt MACH_OMAP_PALMTT OMAP_PALMTT 839 +ml696k MACH_ML696K ML696K 840 +arcom_zeus MACH_ARCOM_ZEUS ARCOM_ZEUS 841 +osiris MACH_OSIRIS OSIRIS 842 +maestro MACH_MAESTRO MAESTRO 843 +tunge2 MACH_TUNGE2 TUNGE2 844 +ixbbm MACH_IXBBM IXBBM 845 +mx27 MACH_MX27 MX27 846 +ax8004 MACH_AX8004 AX8004 847 +at91sam9261ek MACH_AT91SAM9261EK AT91SAM9261EK 848 +loft MACH_LOFT LOFT 849 +magpie MACH_MAGPIE MAGPIE 850 +mx21 MACH_MX21 MX21 851 +mb87m3400 MACH_MB87M3400 MB87M3400 852 +mguard_delta MACH_MGUARD_DELTA MGUARD_DELTA 853 +davinci_dvdp MACH_DAVINCI_DVDP DAVINCI_DVDP 854 +htcuniversal MACH_HTCUNIVERSAL HTCUNIVERSAL 855 +tpad MACH_TPAD TPAD 856 +roverp3 MACH_ROVERP3 ROVERP3 857 -- cgit v0.10.2 From 86371d071bc38a181984b01d323b6172a4b7bb1f Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 10 Oct 2005 10:17:42 +0100 Subject: [ARM] 2957/1: imx UART Error handling Patch from Sascha Hauer Fix error path in imx_startup. Signed-off-by: Giancarlo Formicuccia Signed-off-by: Sascha Hauer Signed-off-by: Russell King diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 4e1e80a..53e0323 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -383,11 +383,11 @@ static int imx_startup(struct uart_port *port) */ retval = request_irq(sport->rxirq, imx_rxint, 0, DRIVER_NAME, sport); - if (retval) goto error_out2; + if (retval) goto error_out1; retval = request_irq(sport->txirq, imx_txint, 0, "imx-uart", sport); - if (retval) goto error_out1; + if (retval) goto error_out2; /* * Finally, clear and enable interrupts @@ -406,10 +406,9 @@ static int imx_startup(struct uart_port *port) return 0; -error_out1: - free_irq(sport->rxirq, sport); error_out2: - free_irq(sport->txirq, sport); + free_irq(sport->rxirq, sport); +error_out1: return retval; } -- cgit v0.10.2 From 79d13b62ef9da84d3ba551caac42d6107e57208f Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 10 Oct 2005 10:17:43 +0100 Subject: [ARM] 2958/1: fix definition in imx-regs.h Patch from Sascha Hauer Fix PD7_AF_UART2_DTR definition Signed-off-by: Giancarlo Formicuccia Signed-off-by: Sascha Hauer Signed-off-by: Russell King diff --git a/include/asm-arm/arch-imx/imx-regs.h b/include/asm-arm/arch-imx/imx-regs.h index 229f700..a6912b3 100644 --- a/include/asm-arm/arch-imx/imx-regs.h +++ b/include/asm-arm/arch-imx/imx-regs.h @@ -215,7 +215,7 @@ #define PC31_AOUT_UART3_RX ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31) #define PD6_PF_LSCLK ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 ) #define PD7_PF_REV ( GPIO_PORTD | GPIO_PF | 7 ) -#define PD7_AF_UART2_DTR ( GPIO_PORTD | GPIO_IN | GPIO_AF | 7 ) +#define PD7_AF_UART2_DTR ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7 ) #define PD7_AIN_SPI2_SCLK ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7 ) #define PD8_PF_CLS ( GPIO_PORTD | GPIO_PF | 8 ) #define PD8_AF_UART2_DCD ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 ) -- cgit v0.10.2 From 19da83f632d235fff9f94671d2e2cf87d27a2446 Mon Sep 17 00:00:00 2001 From: "George G. Davis" Date: Mon, 10 Oct 2005 10:17:44 +0100 Subject: [ARM] 2959/1: Add test for invalid LDRD/STRD Rd cases in ARM alignment handler Patch from George G. Davis Add test for invalid LDRD/STRD Rd cases in ARM alignment handler and restore SWP printk KERN_ERR. Signed-off-by: Steve Longerbeam Signed-off-by: George G. Davis Signed-off-by: Russell King diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index 4b39d86..f35e69e 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -330,6 +330,9 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr, { unsigned int rd = RD_BITS(instr); + if (((rd & 1) == 1) || (rd == 14)) + goto bad; + ai_dword += 1; if (user_mode(regs)) @@ -361,7 +364,8 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr, } return TYPE_LDST; - + bad: + return TYPE_ERROR; fault: return TYPE_FAULT; } @@ -663,6 +667,8 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) else if ((instr & 0x001000f0) == 0x000000d0 || /* LDRD */ (instr & 0x001000f0) == 0x000000f0) /* STRD */ handler = do_alignment_ldrdstrd; + else if ((instr & 0x01f00ff0) == 0x01000090) /* SWP */ + goto swp; else goto bad; break; @@ -733,6 +739,9 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) do_bad_area(current, current->mm, addr, fsr, regs); return 0; + swp: + printk(KERN_ERR "Alignment trap: not handling swp instruction\n"); + bad: /* * Oops, we didn't handle the instruction. -- cgit v0.10.2 From 97b8e00e8538c9eb23983545d665ffd7052ccedb Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Mon, 10 Oct 2005 10:17:44 +0100 Subject: [ARM] 2960/1: collie: Add missing scoop call parameters Patch from Richard Purdie Add some missing parameters from the scoop calls on collie. Signed-off-by: Richard Purdie Signed-off-by: Russell King diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 25d6a4e..6ecab7e 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -111,11 +111,11 @@ static struct mtd_partition collie_partitions[] = { static void collie_set_vpp(int vpp) { - write_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR, read_scoop_reg(SCOOP_GPCR) | COLLIE_SCP_VPEN); + write_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR) | COLLIE_SCP_VPEN); if (vpp) - write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) | COLLIE_SCP_VPEN); + write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) | COLLIE_SCP_VPEN); else - write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) & ~COLLIE_SCP_VPEN); + write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) & ~COLLIE_SCP_VPEN); } static struct flash_platform_data collie_flash_data = { -- cgit v0.10.2 From 1036260e93a907a0143efa31bf05be1f3271eb90 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Mon, 10 Oct 2005 10:17:45 +0100 Subject: [ARM] 2961/1: corgi: Add missing include Patch from Richard Purdie Add a missing include from corgi.c Signed-off-by: Richard Purdie Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index be37586..60c8b9d 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #include -- cgit v0.10.2 From 7c3989885cfd37d237eca97832b712a7ffbbf40c Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Mon, 10 Oct 2005 10:20:06 +0100 Subject: [ARM] 2962/1: scoop: Allow GPIO pin suspend state to be specified Patch from Richard Purdie Allow the GPIO pin suspend states to be specified for SCOOP devices. This is needed for correct operation on the spitz platform. Signed-off-by: Richard Purdie Signed-off-by: Russell King diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index d3a04c2..9e5245c 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -26,6 +26,8 @@ struct scoop_pcmcia_dev *scoop_devs; struct scoop_dev { void *base; spinlock_t scoop_lock; + unsigned short suspend_clr; + unsigned short suspend_set; u32 scoop_gpwr; }; @@ -90,14 +92,24 @@ EXPORT_SYMBOL(reset_scoop); EXPORT_SYMBOL(read_scoop_reg); EXPORT_SYMBOL(write_scoop_reg); +static void check_scoop_reg(struct scoop_dev *sdev) +{ + unsigned short mcr; + + mcr = SCOOP_REG(sdev->base, SCOOP_MCR); + if ((mcr & 0x100) == 0) + SCOOP_REG(sdev->base, SCOOP_MCR) = 0x0101; +} + #ifdef CONFIG_PM static int scoop_suspend(struct device *dev, pm_message_t state, uint32_t level) { if (level == SUSPEND_POWER_DOWN) { struct scoop_dev *sdev = dev_get_drvdata(dev); - sdev->scoop_gpwr = SCOOP_REG(sdev->base,SCOOP_GPWR); - SCOOP_REG(sdev->base,SCOOP_GPWR) = 0; + check_scoop_reg(sdev); + sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR); + SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set; } return 0; } @@ -107,6 +119,7 @@ static int scoop_resume(struct device *dev, uint32_t level) if (level == RESUME_POWER_ON) { struct scoop_dev *sdev = dev_get_drvdata(dev); + check_scoop_reg(sdev); SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr; } return 0; @@ -151,6 +164,9 @@ int __init scoop_probe(struct device *dev) SCOOP_REG(devptr->base, SCOOP_GPCR) = inf->io_dir & 0xffff; SCOOP_REG(devptr->base, SCOOP_GPWR) = inf->io_out & 0xffff; + devptr->suspend_clr = inf->suspend_clr; + devptr->suspend_set = inf->suspend_set; + return 0; } diff --git a/include/asm-arm/hardware/scoop.h b/include/asm-arm/hardware/scoop.h index 527404b..a8f1013 100644 --- a/include/asm-arm/hardware/scoop.h +++ b/include/asm-arm/hardware/scoop.h @@ -38,6 +38,8 @@ struct scoop_config { unsigned short io_out; unsigned short io_dir; + unsigned short suspend_clr; + unsigned short suspend_set; }; /* Structure for linking scoop devices to PCMCIA sockets */ -- cgit v0.10.2 From cdfc8f5079fdd18f6cb8097aa4235704d1155ec5 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 10 Oct 2005 10:20:06 +0100 Subject: [ARM] 2963/1: S3C2410 - add .owner field to device_driver Patch from Ben Dooks Add initialisation of .owner field so that the device driver can be referenced to the module that owns it. Signed-off-by: Ben Dooks Signed-off-by: Russell King diff --git a/drivers/char/s3c2410-rtc.c b/drivers/char/s3c2410-rtc.c index ed867db..e1a90d9 100644 --- a/drivers/char/s3c2410-rtc.c +++ b/drivers/char/s3c2410-rtc.c @@ -564,6 +564,7 @@ static int s3c2410_rtc_resume(struct device *dev, u32 level) static struct device_driver s3c2410_rtcdrv = { .name = "s3c2410-rtc", + .owner = THIS_MODULE, .bus = &platform_bus_type, .probe = s3c2410_rtc_probe, .remove = s3c2410_rtc_remove, -- cgit v0.10.2 From 7dead80cbee3259e3a9f25bfc65c8dc769a19e0e Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 10 Oct 2005 10:20:07 +0100 Subject: [ARM] 2964/1: S3C2410 - serial: add .owner to driver Patch from Ben Dooks Initialise the driver's .owner field so that the device driver can be referenced to the module that owns it Signed-off-by: Ben Dooks Signed-off-by: Russell King diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c index 50d7870..eff2158 100644 --- a/drivers/serial/s3c2410.c +++ b/drivers/serial/s3c2410.c @@ -1235,6 +1235,7 @@ static int s3c2400_serial_probe(struct device *dev) static struct device_driver s3c2400_serial_drv = { .name = "s3c2400-uart", + .owner = THIS_MODULE, .bus = &platform_bus_type, .probe = s3c2400_serial_probe, .remove = s3c24xx_serial_remove, @@ -1338,6 +1339,7 @@ static int s3c2410_serial_probe(struct device *dev) static struct device_driver s3c2410_serial_drv = { .name = "s3c2410-uart", + .owner = THIS_MODULE, .bus = &platform_bus_type, .probe = s3c2410_serial_probe, .remove = s3c24xx_serial_remove, @@ -1499,6 +1501,7 @@ static int s3c2440_serial_probe(struct device *dev) static struct device_driver s3c2440_serial_drv = { .name = "s3c2440-uart", + .owner = THIS_MODULE, .bus = &platform_bus_type, .probe = s3c2440_serial_probe, .remove = s3c24xx_serial_remove, -- cgit v0.10.2 From 220ec0291130a932b32b2c66a10e9c5019dab702 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 10 Oct 2005 11:13:17 -0400 Subject: [PATCH] pcmcia: fix task state at pccard thread exit The pccardd thread has a race in it that it can shutdown in the TASK_INTERRUPTIBLE state. Make sure we mark ourselves runnable again as we remove ourselves from the wait queue. Signed-off-by: Steven Rostedt Signed-off-by: Linus Torvalds diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c index fabd352..d5e7642 100644 --- a/drivers/pcmcia/cs.c +++ b/drivers/pcmcia/cs.c @@ -689,6 +689,9 @@ static int pccardd(void *__skt) schedule(); try_to_freeze(); } + /* make sure we are running before we exit */ + set_current_state(TASK_RUNNING); + remove_wait_queue(&skt->thread_wait, &wait); /* remove from the device core */ -- cgit v0.10.2 From 5cd10daa0c7fc1410e1c0d685cbc9622c769eb16 Mon Sep 17 00:00:00 2001 From: Paolo 'Blaisorblade' Giarrusso Date: Sun, 9 Oct 2005 21:37:05 +0200 Subject: [PATCH] Uml: hide commands when not being verbose Add a missing $(Q) to a "ln" invocation. Signed-off-by: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Linus Torvalds diff --git a/arch/um/Makefile b/arch/um/Makefile index 7af37e3..e1ffad2 100644 --- a/arch/um/Makefile +++ b/arch/um/Makefile @@ -152,7 +152,7 @@ archclean: $(SYMLINK_HEADERS): @echo ' SYMLINK $@' ifneq ($(KBUILD_SRC),) - ln -fsn $(srctree)/include/asm-um/$(basename $(notdir $@))-$(SUBARCH)$(suffix $@) $@ + $(Q)ln -fsn $(srctree)/include/asm-um/$(basename $(notdir $@))-$(SUBARCH)$(suffix $@) $@ else $(Q)cd $(TOPDIR)/$(dir $@) ; \ ln -sf $(basename $(notdir $@))-$(SUBARCH)$(suffix $@) $(notdir $@) -- cgit v0.10.2 From 9e3d862e5c341c59b673c9cadd64210ca03cb41e Mon Sep 17 00:00:00 2001 From: Paolo 'Blaisorblade' Giarrusso Date: Sun, 9 Oct 2005 21:37:18 +0200 Subject: [PATCH] uml: add mode=skas0 as a synonym of skas0 Too many people were confused by skas0 and tried using "mode=skas0". And after all, they are right - accept this. Signed-off-by: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Linus Torvalds diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c index 6af8317..b99ab41 100644 --- a/arch/um/os-Linux/start_up.c +++ b/arch/um/os-Linux/start_up.c @@ -143,11 +143,22 @@ static int __init skas0_cmd_param(char *str, int* add) return 0; } +/* The two __uml_setup would conflict, without this stupid alias. */ + +static int __init mode_skas0_cmd_param(char *str, int* add) + __attribute__((alias("skas0_cmd_param"))); + __uml_setup("skas0", skas0_cmd_param, "skas0\n" " Disables SKAS3 usage, so that SKAS0 is used, unless \n" " you specify mode=tt.\n\n"); +__uml_setup("mode=skas0", mode_skas0_cmd_param, + "mode=skas0\n" + " Disables SKAS3 usage, so that SKAS0 is used, unless you \n" + " specify mode=tt. Note that this was recently added - on \n" + " older kernels you must use simply \"skas0\".\n\n"); + static int force_sysemu_disabled = 0; static int __init nosysemu_cmd_param(char *str, int* add) -- cgit v0.10.2 From 54a8a2220c936a47840c9a3d74910c5a56fae2ed Mon Sep 17 00:00:00 2001 From: Paolo 'Blaisorblade' Giarrusso Date: Sun, 9 Oct 2005 21:37:26 +0200 Subject: [PATCH] uml: allow building .s/.i/.lst files from userspace files For files which need to include glibc headers (i.e. userspace files), we specified the correct flags only for .o, not for .s/.lst/.i. Fix this. Signed-off-by: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Linus Torvalds diff --git a/arch/um/scripts/Makefile.rules b/arch/um/scripts/Makefile.rules index 59a1291..651d9d8 100644 --- a/arch/um/scripts/Makefile.rules +++ b/arch/um/scripts/Makefile.rules @@ -7,8 +7,8 @@ USER_SINGLE_OBJS := \ USER_OBJS += $(filter %_user.o,$(obj-y) $(obj-m) $(USER_SINGLE_OBJS)) USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file)) -$(USER_OBJS) : c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) \ - $(CFLAGS_$(notdir $@)) +$(USER_OBJS) $(USER_OBJS:.o=.i) $(USER_OBJS:.o=.s) $(USER_OBJS:.o=.lst): \ + c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) $(CFLAGS_$(notdir $@)) $(USER_OBJS): cmd_checksrc = $(USER_OBJS): quiet_cmd_checksrc = $(USER_OBJS): cmd_force_checksrc = -- cgit v0.10.2 From 855ec613ca7e1953d96d7ea81af90392678788f5 Mon Sep 17 00:00:00 2001 From: Paolo 'Blaisorblade' Giarrusso Date: Sun, 9 Oct 2005 21:37:35 +0200 Subject: [PATCH] uml: restore include breakage, breaking binary format of COW driver Commit 44456d37b59d8e541936ed26d8b6e08d27e88ac1, between 2.6.13-rc3 and -rc4, was a "nice cleanup" which broke something. Revert the offending part. It broke because: a) because this part doesn't fall under the description b) the author didn't know what he was doing here c) the author didn't try to compile the existing code and see that it worked perfectly. d) the author didn't ask us what was happening e) you didn't either, and somebody there should have learned that UML is a bit different. In fact, UML is special in linking to host libc and using its includes. In particular, since host includes always define both __BIG_ENDIAN and __LITTLE_ENDIAN, ntohll() macros started thinking to be in a big-endian world; and on-disk compatibility was broken. Many thanks go to Nix for reporting the problem and correctly diagnosing an endianness problem. Btw, this patch restores the previous code, which worked; but the definitions would be uncorrect if used in kernelspace files. Next patch addresses that. Cc: Nix , Olaf Hering Signed-off-by: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Linus Torvalds diff --git a/arch/um/drivers/cow.h b/arch/um/drivers/cow.h index 4fcf3a8..4fcbe8b 100644 --- a/arch/um/drivers/cow.h +++ b/arch/um/drivers/cow.h @@ -3,10 +3,10 @@ #include -#if defined(__BIG_ENDIAN) +#if __BYTE_ORDER == __BIG_ENDIAN # define ntohll(x) (x) # define htonll(x) (x) -#elif defined(__LITTLE_ENDIAN) +#elif __BYTE_ORDER == __LITTLE_ENDIAN # define ntohll(x) bswap_64(x) # define htonll(x) bswap_64(x) #else -- cgit v0.10.2 From 028c0cc16e429ae24d9b8aacc64f4438bdfac0cc Mon Sep 17 00:00:00 2001 From: Paolo 'Blaisorblade' Giarrusso Date: Sun, 9 Oct 2005 21:37:45 +0200 Subject: [PATCH] uml: cleanup byte order macros for COW driver After restoring the existing code, make it work also when included in kernelspace code (which isn't currently the case, but at least this will prevent people from "fixing" it as just happened). Whitespace is fixed in next patch - it cluttered the diff too much. Signed-off-by: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Linus Torvalds diff --git a/arch/um/drivers/cow.h b/arch/um/drivers/cow.h index 4fcbe8b..c54e20a 100644 --- a/arch/um/drivers/cow.h +++ b/arch/um/drivers/cow.h @@ -3,6 +3,26 @@ #include +#if defined(__KERNEL__) + +# include + +# if defined(__BIG_ENDIAN) +# define ntohll(x) (x) +# define htonll(x) (x) +# elif defined(__LITTLE_ENDIAN) +# define ntohll(x) be64_to_cpu(x) +# define htonll(x) cpu_to_be64(x) +# else +# error "Could not determine byte order" +# endif + +#else +/* For the definition of ntohl, htonl and __BYTE_ORDER */ +#include +#include +#if defined(__BYTE_ORDER) + #if __BYTE_ORDER == __BIG_ENDIAN # define ntohll(x) (x) # define htonll(x) (x) @@ -10,8 +30,13 @@ # define ntohll(x) bswap_64(x) # define htonll(x) bswap_64(x) #else -#error "__BYTE_ORDER not defined" +# error "Could not determine byte order: __BYTE_ORDER uncorrectly defined" +#endif + +#else /* ! defined(__BYTE_ORDER) */ +# error "Could not determine byte order: __BYTE_ORDER not defined" #endif +#endif /* ! defined(__KERNEL__) */ extern int init_cow_file(int fd, char *cow_file, char *backing_file, int sectorsize, int alignment, int *bitmap_offset_out, diff --git a/arch/um/drivers/cow_user.c b/arch/um/drivers/cow_user.c index a8ce6fc..fbe2217 100644 --- a/arch/um/drivers/cow_user.c +++ b/arch/um/drivers/cow_user.c @@ -9,7 +9,6 @@ #include #include #include -#include #include "os.h" -- cgit v0.10.2 From 52a2d3e45e06012a662f627177729d3196ba8903 Mon Sep 17 00:00:00 2001 From: Paolo 'Blaisorblade' Giarrusso Date: Sun, 9 Oct 2005 21:37:53 +0200 Subject: [PATCH] uml: cleanup whitespace for COW driver Fix whitespace - I split this off the previous patch for easier review. Signed-off-by: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Linus Torvalds diff --git a/arch/um/drivers/cow.h b/arch/um/drivers/cow.h index c54e20a..dc36b22 100644 --- a/arch/um/drivers/cow.h +++ b/arch/um/drivers/cow.h @@ -23,15 +23,15 @@ #include #if defined(__BYTE_ORDER) -#if __BYTE_ORDER == __BIG_ENDIAN -# define ntohll(x) (x) -# define htonll(x) (x) -#elif __BYTE_ORDER == __LITTLE_ENDIAN -# define ntohll(x) bswap_64(x) -# define htonll(x) bswap_64(x) -#else -# error "Could not determine byte order: __BYTE_ORDER uncorrectly defined" -#endif +# if __BYTE_ORDER == __BIG_ENDIAN +# define ntohll(x) (x) +# define htonll(x) (x) +# elif __BYTE_ORDER == __LITTLE_ENDIAN +# define ntohll(x) bswap_64(x) +# define htonll(x) bswap_64(x) +# else +# error "Could not determine byte order: __BYTE_ORDER uncorrectly defined" +# endif #else /* ! defined(__BYTE_ORDER) */ # error "Could not determine byte order: __BYTE_ORDER not defined" -- cgit v0.10.2 From 3dd083255ddcfa87751fa8e32f61a9547a15a541 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 9 Oct 2005 21:19:40 +0200 Subject: [PATCH] x86_64: Set up safe page tables during resume The following patch makes swsusp avoid the possible temporary corruption of page translation tables during resume on x86-64. This is achieved by creating a copy of the relevant page tables that will not be modified by swsusp and can be safely used by it on resume. The problem is that during resume on x86-64 swsusp may temporarily corrupt the page tables used for the direct mapping of RAM. If that happens, a page fault occurs and cannot be handled properly, which leads to the solid hang of the affected system. This leads to the loss of the system's state from before suspend and may result in the loss of data or the corruption of filesystems, so it is a serious issue. Also, it appears to happen quite often (for me, as often as 50% of the time). The problem is related to the fact that (at least) one of the PMD entries used in the direct memory mapping (starting at PAGE_OFFSET) points to a page table the physical address of which is much greater than the physical address of the PMD entry itself. Moreover, unfortunately, the physical address of the page table before suspend (i.e. the one stored in the suspend image) happens to be different to the physical address of the corresponding page table used during resume (i.e. the one that is valid right before swsusp_arch_resume() in arch/x86_64/kernel/suspend_asm.S is executed). Thus while the image is restored, the "offending" PMD entry gets overwritten, so it does not point to the right physical address any more (i.e. there's no page table at the address pointed to by it, because it points to the address the page table has been at during suspend). Consequently, if the PMD entry is used later on, and it _is_ used in the process of copying the image pages, a page fault occurs, but it cannot be handled in the normal way and the system hangs. In principle we can call create_resume_mapping() from swsusp_arch_resume() (ie. from suspend_asm.S), but then the memory allocations in create_resume_mapping(), resume_pud_mapping(), and resume_pmd_mapping() must be made carefully so that we use _only_ NosaveFree pages in them (the other pages are overwritten by the loop in swsusp_arch_resume()). Additionally, we are in atomic context at that time, so we cannot use GFP_KERNEL. Moreover, if one of the allocations fails, we should free all of the allocated pages, so we need to trace them somehow. All of this is done in the appended patch, except that the functions populating the page tables are located in arch/x86_64/kernel/suspend.c rather than in init.c. It may be done in a more elegan way in the future, with the help of some swsusp patches that are in the works now. [AK: move some externs into headers, renamed a function] Signed-off-by: Rafael J. Wysocki Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds diff --git a/arch/x86_64/kernel/suspend.c b/arch/x86_64/kernel/suspend.c index ebb9abf..f066c6a 100644 --- a/arch/x86_64/kernel/suspend.c +++ b/arch/x86_64/kernel/suspend.c @@ -11,6 +11,8 @@ #include #include #include +#include +#include struct saved_context saved_context; @@ -140,4 +142,129 @@ void fix_processor_context(void) } +#ifdef CONFIG_SOFTWARE_SUSPEND +/* Defined in arch/x86_64/kernel/suspend_asm.S */ +extern int restore_image(void); +pgd_t *temp_level4_pgt; + +static void **pages; + +static inline void *__add_page(void) +{ + void **c; + + c = (void **)get_usable_page(GFP_ATOMIC); + if (c) { + *c = pages; + pages = c; + } + return c; +} + +static inline void *__next_page(void) +{ + void **c; + + c = pages; + if (c) { + pages = *c; + *c = NULL; + } + return c; +} + +/* + * Try to allocate as many usable pages as needed and daisy chain them. + * If one allocation fails, free the pages allocated so far + */ +static int alloc_usable_pages(unsigned long n) +{ + void *p; + + pages = NULL; + do + if (!__add_page()) + break; + while (--n); + if (n) { + p = __next_page(); + while (p) { + free_page((unsigned long)p); + p = __next_page(); + } + return -ENOMEM; + } + return 0; +} + +static void res_phys_pud_init(pud_t *pud, unsigned long address, unsigned long end) +{ + long i, j; + + i = pud_index(address); + pud = pud + i; + for (; i < PTRS_PER_PUD; pud++, i++) { + unsigned long paddr; + pmd_t *pmd; + + paddr = address + i*PUD_SIZE; + if (paddr >= end) + break; + + pmd = (pmd_t *)__next_page(); + set_pud(pud, __pud(__pa(pmd) | _KERNPG_TABLE)); + for (j = 0; j < PTRS_PER_PMD; pmd++, j++, paddr += PMD_SIZE) { + unsigned long pe; + + if (paddr >= end) + break; + pe = _PAGE_NX | _PAGE_PSE | _KERNPG_TABLE | paddr; + pe &= __supported_pte_mask; + set_pmd(pmd, __pmd(pe)); + } + } +} + +static void set_up_temporary_mappings(void) +{ + unsigned long start, end, next; + + temp_level4_pgt = (pgd_t *)__next_page(); + + /* It is safe to reuse the original kernel mapping */ + set_pgd(temp_level4_pgt + pgd_index(__START_KERNEL_map), + init_level4_pgt[pgd_index(__START_KERNEL_map)]); + + /* Set up the direct mapping from scratch */ + start = (unsigned long)pfn_to_kaddr(0); + end = (unsigned long)pfn_to_kaddr(end_pfn); + + for (; start < end; start = next) { + pud_t *pud = (pud_t *)__next_page(); + next = start + PGDIR_SIZE; + if (next > end) + next = end; + res_phys_pud_init(pud, __pa(start), __pa(next)); + set_pgd(temp_level4_pgt + pgd_index(start), + mk_kernel_pgd(__pa(pud))); + } +} + +int swsusp_arch_resume(void) +{ + unsigned long n; + + n = ((end_pfn << PAGE_SHIFT) + PUD_SIZE - 1) >> PUD_SHIFT; + n += (n + PTRS_PER_PUD - 1) / PTRS_PER_PUD + 1; + pr_debug("swsusp_arch_resume(): pages needed = %lu\n", n); + if (alloc_usable_pages(n)) { + free_eaten_memory(); + return -ENOMEM; + } + /* We have got enough memory and from now on we cannot recover */ + set_up_temporary_mappings(); + restore_image(); + return 0; +} +#endif /* CONFIG_SOFTWARE_SUSPEND */ diff --git a/arch/x86_64/kernel/suspend_asm.S b/arch/x86_64/kernel/suspend_asm.S index 4d659e9..320b6fb 100644 --- a/arch/x86_64/kernel/suspend_asm.S +++ b/arch/x86_64/kernel/suspend_asm.S @@ -39,12 +39,13 @@ ENTRY(swsusp_arch_suspend) call swsusp_save ret -ENTRY(swsusp_arch_resume) - /* set up cr3 */ - leaq init_level4_pgt(%rip),%rax - subq $__START_KERNEL_map,%rax - movq %rax,%cr3 - +ENTRY(restore_image) + /* switch to temporary page tables */ + movq $__PAGE_OFFSET, %rdx + movq temp_level4_pgt(%rip), %rax + subq %rdx, %rax + movq %rax, %cr3 + /* Flush TLB */ movq mmu_cr4_features(%rip), %rax movq %rax, %rdx andq $~(1<<7), %rdx # PGE @@ -69,6 +70,10 @@ loop: movq pbe_next(%rdx), %rdx jmp loop done: + /* go back to the original page tables */ + leaq init_level4_pgt(%rip), %rax + subq $__START_KERNEL_map, %rax + movq %rax, %cr3 /* Flush TLB, including "global" things (vmalloc) */ movq mmu_cr4_features(%rip), %rax movq %rax, %rdx diff --git a/include/linux/suspend.h b/include/linux/suspend.h index f2e96fd..ad15a54 100644 --- a/include/linux/suspend.h +++ b/include/linux/suspend.h @@ -71,5 +71,7 @@ void restore_processor_state(void); struct saved_context; void __save_processor_state(struct saved_context *ctxt); void __restore_processor_state(struct saved_context *ctxt); +extern unsigned long get_usable_page(unsigned gfp_mask); +extern void free_eaten_memory(void); #endif /* _LINUX_SWSUSP_H */ diff --git a/kernel/power/swsusp.c b/kernel/power/swsusp.c index acf79ac..2d5c456 100644 --- a/kernel/power/swsusp.c +++ b/kernel/power/swsusp.c @@ -1095,7 +1095,7 @@ static inline void eat_page(void *page) *eaten_memory = c; } -static unsigned long get_usable_page(unsigned gfp_mask) +unsigned long get_usable_page(unsigned gfp_mask) { unsigned long m; @@ -1109,7 +1109,7 @@ static unsigned long get_usable_page(unsigned gfp_mask) return m; } -static void free_eaten_memory(void) +void free_eaten_memory(void) { unsigned long m; void **c; @@ -1481,11 +1481,12 @@ static int read_suspend_image(void) /* Allocate memory for the image and read the data from swap */ error = check_pagedir(pagedir_nosave); - free_eaten_memory(); + if (!error) error = data_read(pagedir_nosave); if (error) { /* We fail cleanly */ + free_eaten_memory(); for_each_pbe (p, pagedir_nosave) if (p->address) { free_page(p->address); -- cgit v0.10.2 From 50f72b57946d565db74fae71bac23f3f319311c8 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sun, 9 Oct 2005 16:11:44 -0400 Subject: [PATCH] uml: fix x86_64 with !CONFIG_FRAME_POINTER UML/x86_64 doesn't run when built with frame pointers disabled. There was an implicit frame pointer assumption in the stub segfault handler. With frame pointers disabled, UML dies on handling its first page fault. The container-of part of this is from Paolo Giarrusso . Signed-off-by: Jeff Dike Signed-off-by: Linus Torvalds diff --git a/arch/um/sys-x86_64/stub_segv.c b/arch/um/sys-x86_64/stub_segv.c index 65a131b..d1e53bd 100644 --- a/arch/um/sys-x86_64/stub_segv.c +++ b/arch/um/sys-x86_64/stub_segv.c @@ -10,6 +10,22 @@ #include "uml-config.h" #include "sysdep/sigcontext.h" #include "sysdep/faultinfo.h" +#include + +/* Copied from sys-x86_64/signal.c - Can't find an equivalent definition + * in the libc headers anywhere. + */ +struct rt_sigframe +{ + char *pretcode; + struct ucontext uc; + struct siginfo info; +}; + +/* Copied here from - we're userspace. */ +#define container_of(ptr, type, member) ({ \ + const typeof( ((type *)0)->member ) *__mptr = (ptr); \ + (type *)( (char *)__mptr - offsetof(type,member) );}) void __attribute__ ((__section__ (".__syscall_stub"))) stub_segv_handler(int sig) @@ -17,16 +33,19 @@ stub_segv_handler(int sig) struct ucontext *uc; __asm__("movq %%rdx, %0" : "=g" (uc) :); - GET_FAULTINFO_FROM_SC(*((struct faultinfo *) UML_CONFIG_STUB_DATA), - &uc->uc_mcontext); + GET_FAULTINFO_FROM_SC(*((struct faultinfo *) UML_CONFIG_STUB_DATA), + &uc->uc_mcontext); - __asm__("movq %0, %%rax ; syscall": : "g" (__NR_getpid)); + __asm__("movq %0, %%rax ; syscall": : "g" (__NR_getpid)); __asm__("movq %%rax, %%rdi ; movq %0, %%rax ; movq %1, %%rsi ;" - "syscall": : "g" (__NR_kill), "g" (SIGUSR1)); - /* Two popqs to restore the stack to the state just before entering - * the handler, one pops the return address, the other pops the frame - * pointer. + "syscall": : "g" (__NR_kill), "g" (SIGUSR1) : + "%rdi", "%rax", "%rsi"); + /* sys_sigreturn expects that the stack pointer will be 8 bytes into + * the signal frame. So, we use the ucontext pointer, which we know + * already, to get the signal frame pointer, and add 8 to that. */ - __asm__("popq %%rax ; popq %%rax ; movq %0, %%rax ; syscall" : : "g" - (__NR_rt_sigreturn)); + __asm__("movq %0, %%rsp": : + "g" ((unsigned long) container_of(uc, struct rt_sigframe, + uc) + 8)); + __asm__("movq %0, %%rax ; syscall" : : "g" (__NR_rt_sigreturn)); } -- cgit v0.10.2 From 1cc956e12aedfdc6baf6312bc36a6b5a71af3c9d Mon Sep 17 00:00:00 2001 From: Tom Zanussi Date: Sun, 9 Oct 2005 10:41:32 -0500 Subject: [PATCH] relayfs: fix bogus param value in call to vmap The third param in this call to vmap shouldn't be GFP_KERNEL, which makes no sense, but rather VM_MAP. Thanks to Al Viro for spotting this. Signed-off-by: Tom Zanussi Signed-off-by: Linus Torvalds diff --git a/fs/relayfs/buffers.c b/fs/relayfs/buffers.c index 2aa8e27..84e21ff 100644 --- a/fs/relayfs/buffers.c +++ b/fs/relayfs/buffers.c @@ -109,7 +109,7 @@ static void *relay_alloc_buf(struct rchan_buf *buf, unsigned long size) if (unlikely(!buf->page_array[i])) goto depopulate; } - mem = vmap(buf->page_array, n_pages, GFP_KERNEL, PAGE_KERNEL); + mem = vmap(buf->page_array, n_pages, VM_MAP, PAGE_KERNEL); if (!mem) goto depopulate; -- cgit v0.10.2 From 867f8b4e47a17c5d68c98dc6eee12739c4490056 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sun, 9 Oct 2005 10:37:47 +1000 Subject: [PATCH] ide: Workaround PM problem The logic in ide_do_request() doesn't guarantee that both drives will be serviced after a call. It may "forget" to service one in some circumstances, including when one of the drive is suspended (it will eventually fail to service the slave when the master is suspended for example). This prevents the wakeup requests that gets queued on wakeup from sleep from beeing serviced in some cases when 2 drives are sharing an IDE bus. The problem is deep enough in the way this code works (and there are probably a few other problematic but rare corner cases) and fixing it would require some major rethinking of the way IDE decides which channel to service. This is not 2.6.14 material. However, in the meantime, Bart has accepted this simple workaround that will fix the crash on wakeup from sleep since this specific corner case is actually hitting users to get into 2.6.14. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Linus Torvalds diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 9e9cf14..5275cbb 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -1101,6 +1101,7 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq) ide_hwif_t *hwif; struct request *rq; ide_startstop_t startstop; + int loops = 0; /* for atari only: POSSIBLY BROKEN HERE(?) */ ide_get_lock(ide_intr, hwgroup); @@ -1153,6 +1154,7 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq) /* no more work for this hwgroup (for now) */ return; } + again: hwif = HWIF(drive); if (hwgroup->hwif->sharing_irq && hwif != hwgroup->hwif && @@ -1192,8 +1194,14 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq) * though. I hope that doesn't happen too much, hopefully not * unless the subdriver triggers such a thing in its own PM * state machine. + * + * We count how many times we loop here to make sure we service + * all drives in the hwgroup without looping for ever */ if (drive->blocked && !blk_pm_request(rq) && !(rq->flags & REQ_PREEMPT)) { + drive = drive->next ? drive->next : hwgroup->drive; + if (loops++ < 4 && !blk_queue_plugged(drive->queue)) + goto again; /* We clear busy, there should be no pending ATA command at this point. */ hwgroup->busy = 0; break; -- cgit v0.10.2 From d347f372273c2b3d86a66e2e1c94c790c208e166 Mon Sep 17 00:00:00 2001 From: "Markus F.X.J. Oberhumer" Date: Sun, 9 Oct 2005 18:54:23 +0200 Subject: [PATCH] i386: fix stack alignment for signal handlers This fixes the setup of the alignment of the signal frame, so that all signal handlers are run with a properly aligned stack frame. The current code "over-aligns" the stack pointer so that the stack frame is effectively always mis-aligned by 4 bytes. But what we really want is that on function entry ((sp + 4) & 15) == 0, which matches what would happen if the stack were aligned before a "call" instruction. Signed-off-by: Markus F.X.J. Oberhumer Signed-off-by: Linus Torvalds diff --git a/arch/i386/kernel/signal.c b/arch/i386/kernel/signal.c index 61eb0c8..adcd069 100644 --- a/arch/i386/kernel/signal.c +++ b/arch/i386/kernel/signal.c @@ -338,7 +338,11 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size) esp = (unsigned long) ka->sa.sa_restorer; } - return (void __user *)((esp - frame_size) & -8ul); + esp -= frame_size; + /* Align the stack pointer according to the i386 ABI, + * i.e. so that on function entry ((sp + 4) & 15) == 0. */ + esp = ((esp + 4) & -16ul) - 4; + return (void __user *) esp; } /* These symbols are defined with the addresses in the vsyscall page. diff --git a/arch/x86_64/ia32/ia32_signal.c b/arch/x86_64/ia32/ia32_signal.c index 66e2821..0903cc1 100644 --- a/arch/x86_64/ia32/ia32_signal.c +++ b/arch/x86_64/ia32/ia32_signal.c @@ -425,7 +425,11 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size) rsp = (unsigned long) ka->sa.sa_restorer; } - return (void __user *)((rsp - frame_size) & -8UL); + rsp -= frame_size; + /* Align the stack pointer according to the i386 ABI, + * i.e. so that on function entry ((sp + 4) & 15) == 0. */ + rsp = ((rsp + 4) & -16ul) - 4; + return (void __user *) rsp; } int ia32_setup_frame(int sig, struct k_sigaction *ka, -- cgit v0.10.2 From 585f54575d832506bbe9b5a2f435f37b81efc849 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Mon, 10 Oct 2005 18:22:17 +0100 Subject: [ARM] 2956/1: fix the "Fix gcc4 build errors in ucb1x00-core.c" Patch from Nicolas Pitre drivers/mfd/ucb1x00-core.c: In function 'ucb1x00_probe': drivers/mfd/ucb1x00-core.c:482: error: 'ucb1x00_class' undeclared (first use in this function) Signed-off-by: Nicolas Pitre Signed-off-by: Russell King diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c index 612564a..e335d54 100644 --- a/drivers/mfd/ucb1x00-core.c +++ b/drivers/mfd/ucb1x00-core.c @@ -457,6 +457,17 @@ static int ucb1x00_detect_irq(struct ucb1x00 *ucb) return probe_irq_off(mask); } +static void ucb1x00_release(struct class_device *dev) +{ + struct ucb1x00 *ucb = classdev_to_ucb1x00(dev); + kfree(ucb); +} + +static struct class ucb1x00_class = { + .name = "ucb1x00", + .release = ucb1x00_release, +}; + static int ucb1x00_probe(struct mcp *mcp) { struct ucb1x00 *ucb; @@ -546,17 +557,6 @@ static void ucb1x00_remove(struct mcp *mcp) class_device_unregister(&ucb->cdev); } -static void ucb1x00_release(struct class_device *dev) -{ - struct ucb1x00 *ucb = classdev_to_ucb1x00(dev); - kfree(ucb); -} - -static struct class ucb1x00_class = { - .name = "ucb1x00", - .release = ucb1x00_release, -}; - int ucb1x00_register_driver(struct ucb1x00_driver *drv) { struct ucb1x00 *ucb; -- cgit v0.10.2 From 86b324874f571297237c0c940bfe7e5f0f9ca5d2 Mon Sep 17 00:00:00 2001 From: Vincent Sanders Date: Mon, 10 Oct 2005 18:24:06 +0100 Subject: [ARM] 2965/1: defconfig for the ARM Spitz platform Patch from Vincent Sanders Add a defconfig for the ARM Spitz Zarus platform Signed-off-by: Richard Purdie Signed-off-by: Vincent Sanders Signed-off-by: Russell King diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig new file mode 100644 index 0000000..900e04f --- /dev/null +++ b/arch/arm/configs/spitz_defconfig @@ -0,0 +1,1401 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc3 +# Sun Oct 9 17:11:19 2005 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set + +# +# Intel PXA2xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +CONFIG_PXA_SHARPSL=y +# CONFIG_PXA_SHARPSL_25x is not set +CONFIG_PXA_SHARPSL_27x=y +CONFIG_MACH_SPITZ=y +CONFIG_MACH_BORZOI=y +CONFIG_PXA27x=y +CONFIG_PXA_SHARP_Cxx00=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_XSCALE_PMU=y +CONFIG_SHARP_PARAM=y +CONFIG_SHARP_SCOOP=y + +# +# Bus support +# +CONFIG_ISA_DMA_API=y + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_PCMCIA_PXA2XX=y + +# +# Kernel Features +# +CONFIG_PREEMPT=y +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m +# CONFIG_ARTHUR is not set + +# +# Power management options +# +CONFIG_PM=y +CONFIG_APM=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_TUNNEL=m +CONFIG_IPV6_TUNNEL=m +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +# CONFIG_IP_NF_MATCH_STRING is not set +CONFIG_IP_NF_FILTER=m +# CONFIG_IP_NF_TARGET_REJECT is not set +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +# CONFIG_IP_NF_TARGET_NFQUEUE is not set +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +# CONFIG_IP_NF_TARGET_MASQUERADE is not set +# CONFIG_IP_NF_TARGET_REDIRECT is not set +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_SAME is not set +# CONFIG_IP_NF_NAT_SNMP_BASIC is not set +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +# CONFIG_IP_NF_TARGET_TOS is not set +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_DSCP is not set +# CONFIG_IP_NF_TARGET_MARK is not set +# CONFIG_IP_NF_TARGET_CLASSIFY is not set +# CONFIG_IP_NF_TARGET_TTL is not set +CONFIG_IP_NF_RAW=m +# CONFIG_IP_NF_TARGET_NOTRACK is not set +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_LIMIT=m +CONFIG_IP6_NF_MATCH_MAC=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_MULTIPORT=m +CONFIG_IP6_NF_MATCH_OWNER=m +CONFIG_IP6_NF_MATCH_MARK=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_AHESP=m +CONFIG_IP6_NF_MATCH_LENGTH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_FILTER=m +# CONFIG_IP6_NF_TARGET_LOG is not set +# CONFIG_IP6_NF_TARGET_REJECT is not set +# CONFIG_IP6_NF_TARGET_NFQUEUE is not set +CONFIG_IP6_NF_MANGLE=m +# CONFIG_IP6_NF_TARGET_MARK is not set +# CONFIG_IP6_NF_TARGET_HL is not set +CONFIG_IP6_NF_RAW=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRNET=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +# CONFIG_IRTTY_SIR is not set + +# +# Dongle support +# + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +# CONFIG_NSC_FIR is not set +# CONFIG_WINBOND_FIR is not set +# CONFIG_SMC_IRCC_FIR is not set +# CONFIG_ALI_FIR is not set +# CONFIG_VIA_FIR is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +# CONFIG_BT_HCIUSB_SCO is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_BCSP_TXCRC=y +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIDTL1=m +CONFIG_BT_HCIBT3C=m +CONFIG_BT_HCIBLUECARD=m +CONFIG_BT_HCIBTUART=m +CONFIG_BT_HCIVHCI=m +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +# CONFIG_IEEE80211_CRYPT_CCMP is not set +# CONFIG_IEEE80211_CRYPT_TKIP is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +CONFIG_MTD_ROM=y +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_SHARP_SL=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_H1900 is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_SHARPSL=y +# CONFIG_MTD_NAND_NANDSIM is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECS=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_DEBUG is not set + +# +# PCMCIA SCSI adapter support +# +# CONFIG_PCMCIA_AHA152X is not set +# CONFIG_PCMCIA_FDOMAIN is not set +# CONFIG_PCMCIA_NINJA_SCSI is not set +# CONFIG_PCMCIA_QLOGIC is not set +# CONFIG_PCMCIA_SYM53C500 is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=m +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set +# CONFIG_PCMCIA_WAVELAN is not set +# CONFIG_PCMCIA_NETWAVE is not set + +# +# Wireless 802.11 Frequency Hopping cards support +# +# CONFIG_PCMCIA_RAYCS is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +CONFIG_HERMES=m +# CONFIG_ATMEL is not set + +# +# Wireless 802.11b Pcmcia/Cardbus cards support +# +CONFIG_PCMCIA_HERMES=m +CONFIG_PCMCIA_SPECTRUM=m +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_CS=m +CONFIG_NET_WIRELESS=y + +# +# PCMCIA network device support +# +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +CONFIG_PCMCIA_PCNET=m +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPPOE is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_CORGI is not set +CONFIG_KEYBOARD_SPITZ=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_CORGI=y +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_UINPUT=m + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=m +CONFIG_SERIAL_8250_CS=m +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_PXA=y +# CONFIG_FB_W100 is not set +# CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set + +# +# Logo configuration +# +# CONFIG_LOGO is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_DEVICE=y +CONFIG_BACKLIGHT_CORGI=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_SL811_HCD=m +CONFIG_USB_SL811_CS=m + +# +# USB Device Class drivers +# + +# +# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +CONFIG_USB_KBD=m +CONFIG_USB_MOUSE=m +CONFIG_USB_AIPTEK=m +CONFIG_USB_WACOM=m +# CONFIG_USB_ACECAD is not set +CONFIG_USB_KBTAB=m +CONFIG_USB_POWERMATE=m +CONFIG_USB_MTOUCH=m +# CONFIG_USB_ITMTOUCH is not set +CONFIG_USB_EGALAX=m +# CONFIG_USB_YEALINK is not set +CONFIG_USB_XPAD=m +CONFIG_USB_ATI_REMOTE=m +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m + +# +# USB Multimedia devices +# +CONFIG_USB_DABUSB=m + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +CONFIG_USB_NET_ZAURUS=m +# CONFIG_USB_ZD1201 is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set +CONFIG_USB_SERIAL_BELKIN=m +# CONFIG_USB_SERIAL_WHITEHEAT is not set +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +# CONFIG_USB_SERIAL_OPTION is not set +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +CONFIG_USB_AUERSWALD=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +CONFIG_USB_LED=m +CONFIG_USB_CYTHERM=m +CONFIG_USB_PHIDGETKIT=m +CONFIG_USB_PHIDGETSERVO=m +CONFIG_USB_IDMOUSE=m +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +CONFIG_USB_GADGET_DUMMY_HCD=y +CONFIG_USB_DUMMY_HCD=m +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m + +# +# MMC/SD Card support +# +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_BLOCK=y +CONFIG_MMC_PXA=y +# CONFIG_MMC_WBSD is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +CONFIG_SMB_NLS_DEFAULT=y +CONFIG_SMB_NLS_REMOTE="cp437" +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=m + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_WAITQ is not set +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y -- cgit v0.10.2 From b0bdc7be78931dfbfaec8bd0da44a5f4e158ca8f Mon Sep 17 00:00:00 2001 From: Vincent Sanders Date: Mon, 10 Oct 2005 18:24:07 +0100 Subject: [ARM] 2966/1: defconfig for the ARM Poodle platform Patch from Vincent Sanders Add a defconfig for the ARM Poodle Zarus platform Signed-off-by: Richard Purdie Signed-off-by: Vincent Sanders Signed-off-by: Russell King diff --git a/arch/arm/configs/poodle_defconfig b/arch/arm/configs/poodle_defconfig new file mode 100644 index 0000000..7282290 --- /dev/null +++ b/arch/arm/configs/poodle_defconfig @@ -0,0 +1,1015 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc3 +# Sun Oct 9 17:04:29 2005 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set + +# +# Intel PXA2xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +CONFIG_PXA_SHARPSL=y +CONFIG_PXA_SHARPSL_25x=y +# CONFIG_PXA_SHARPSL_27x is not set +CONFIG_MACH_POODLE=y +# CONFIG_MACH_CORGI is not set +# CONFIG_MACH_SHEPHERD is not set +# CONFIG_MACH_HUSKY is not set +CONFIG_PXA25x=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_XSCALE_PMU=y +CONFIG_SHARP_LOCOMO=y +CONFIG_SHARP_PARAM=y +CONFIG_SHARP_SCOOP=y + +# +# Bus support +# +CONFIG_ISA_DMA_API=y + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_PCMCIA_PXA2XX=y + +# +# Kernel Features +# +CONFIG_PREEMPT=y +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m +# CONFIG_ARTHUR is not set + +# +# Power management options +# +CONFIG_PM=y +CONFIG_APM=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_SHARP_SL=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_H1900 is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_SHARPSL=y +# CONFIG_MTD_NAND_NANDSIM is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECS=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set +# CONFIG_PCMCIA_WAVELAN is not set +# CONFIG_PCMCIA_NETWAVE is not set + +# +# Wireless 802.11 Frequency Hopping cards support +# +# CONFIG_PCMCIA_RAYCS is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set + +# +# Wireless 802.11b Pcmcia/Cardbus cards support +# +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_HOSTAP is not set +CONFIG_NET_WIRELESS=y + +# +# PCMCIA network device support +# +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +CONFIG_PCMCIA_PCNET=y +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPPOE is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_TSDEV=y +CONFIG_INPUT_TSDEV_SCREEN_X=240 +CONFIG_INPUT_TSDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_EVBUG=y + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_LOCOMO=y +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_CORGI is not set +CONFIG_KEYBOARD_SPITZ=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# I2C support +# +CONFIG_I2C=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_PXA is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +CONFIG_I2C_DEBUG_CORE=y +CONFIG_I2C_DEBUG_ALGO=y +CONFIG_I2C_DEBUG_BUS=y +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m + +# +# Video For Linux +# + +# +# Video Adapters +# +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set +# CONFIG_VIDEO_OVCAMCHIP is not set + +# +# Radio Adapters +# +# CONFIG_RADIO_MAESTRO is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_PXA=y +# CONFIG_FB_W100 is not set +# CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set + +# +# Logo configuration +# +# CONFIG_LOGO is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB is not set + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_NET2280 is not set +CONFIG_USB_GADGET_PXA2XX=y +CONFIG_USB_PXA2XX=y +# CONFIG_USB_PXA2XX_SMALL is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set + +# +# MMC/SD Card support +# +CONFIG_MMC=y +CONFIG_MMC_DEBUG=y +CONFIG_MMC_BLOCK=y +CONFIG_MMC_PXA=y +# CONFIG_MMC_WBSD is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_WAITQ is not set +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y -- cgit v0.10.2 From 36e5ea67590707a069ce3bcc179b38cdabebcfdd Mon Sep 17 00:00:00 2001 From: Vincent Sanders Date: Mon, 10 Oct 2005 18:24:08 +0100 Subject: [ARM] 2967/1: defconfig for the ARM Corgi platform Patch from Vincent Sanders Add a defconfig for the ARM Corgi Zarus platform Signed-off-by: Richard Purdie Signed-off-by: Vincent Sanders Signed-off-by: Russell King diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig new file mode 100644 index 0000000..24987c8 --- /dev/null +++ b/arch/arm/configs/corgi_defconfig @@ -0,0 +1,1523 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc3 +# Sun Oct 9 15:46:42 2005 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set + +# +# Intel PXA2xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +CONFIG_PXA_SHARPSL=y +CONFIG_PXA_SHARPSL_25x=y +# CONFIG_PXA_SHARPSL_27x is not set +# CONFIG_MACH_POODLE is not set +CONFIG_MACH_CORGI=y +CONFIG_MACH_SHEPHERD=y +CONFIG_MACH_HUSKY=y +CONFIG_PXA25x=y +CONFIG_PXA_SHARP_C7xx=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_XSCALE_PMU=y +CONFIG_SHARP_PARAM=y +CONFIG_SHARP_SCOOP=y + +# +# Bus support +# +CONFIG_ISA_DMA_API=y + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_PCMCIA_PXA2XX=y + +# +# Kernel Features +# +CONFIG_PREEMPT=y +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m +# CONFIG_ARTHUR is not set + +# +# Power management options +# +CONFIG_PM=y +CONFIG_APM=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_TUNNEL=m +CONFIG_IPV6_TUNNEL=m +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +# CONFIG_IP_NF_MATCH_STRING is not set +CONFIG_IP_NF_FILTER=m +# CONFIG_IP_NF_TARGET_REJECT is not set +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +# CONFIG_IP_NF_TARGET_NFQUEUE is not set +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +# CONFIG_IP_NF_TARGET_MASQUERADE is not set +# CONFIG_IP_NF_TARGET_REDIRECT is not set +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_SAME is not set +# CONFIG_IP_NF_NAT_SNMP_BASIC is not set +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +# CONFIG_IP_NF_TARGET_TOS is not set +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_DSCP is not set +# CONFIG_IP_NF_TARGET_MARK is not set +# CONFIG_IP_NF_TARGET_CLASSIFY is not set +# CONFIG_IP_NF_TARGET_TTL is not set +CONFIG_IP_NF_RAW=m +# CONFIG_IP_NF_TARGET_NOTRACK is not set +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_LIMIT=m +CONFIG_IP6_NF_MATCH_MAC=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_MULTIPORT=m +CONFIG_IP6_NF_MATCH_OWNER=m +CONFIG_IP6_NF_MATCH_MARK=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_AHESP=m +CONFIG_IP6_NF_MATCH_LENGTH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_FILTER=m +# CONFIG_IP6_NF_TARGET_LOG is not set +# CONFIG_IP6_NF_TARGET_REJECT is not set +# CONFIG_IP6_NF_TARGET_NFQUEUE is not set +CONFIG_IP6_NF_MANGLE=m +# CONFIG_IP6_NF_TARGET_MARK is not set +# CONFIG_IP6_NF_TARGET_HL is not set +CONFIG_IP6_NF_RAW=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRNET=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +# CONFIG_IRTTY_SIR is not set + +# +# Dongle support +# + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +# CONFIG_NSC_FIR is not set +# CONFIG_WINBOND_FIR is not set +# CONFIG_SMC_IRCC_FIR is not set +# CONFIG_ALI_FIR is not set +# CONFIG_VIA_FIR is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +# CONFIG_BT_HCIUSB_SCO is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_BCSP_TXCRC=y +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIDTL1=m +CONFIG_BT_HCIBT3C=m +CONFIG_BT_HCIBLUECARD=m +CONFIG_BT_HCIBTUART=m +CONFIG_BT_HCIVHCI=m +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +# CONFIG_IEEE80211_CRYPT_CCMP is not set +# CONFIG_IEEE80211_CRYPT_TKIP is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +CONFIG_MTD_ROM=y +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_SHARP_SL=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_H1900 is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_SHARPSL=y +# CONFIG_MTD_NAND_NANDSIM is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECS=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_DEBUG is not set + +# +# PCMCIA SCSI adapter support +# +# CONFIG_PCMCIA_AHA152X is not set +# CONFIG_PCMCIA_FDOMAIN is not set +# CONFIG_PCMCIA_NINJA_SCSI is not set +# CONFIG_PCMCIA_QLOGIC is not set +# CONFIG_PCMCIA_SYM53C500 is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=m +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set +# CONFIG_PCMCIA_WAVELAN is not set +# CONFIG_PCMCIA_NETWAVE is not set + +# +# Wireless 802.11 Frequency Hopping cards support +# +# CONFIG_PCMCIA_RAYCS is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +CONFIG_HERMES=m +# CONFIG_ATMEL is not set + +# +# Wireless 802.11b Pcmcia/Cardbus cards support +# +CONFIG_PCMCIA_HERMES=m +CONFIG_PCMCIA_SPECTRUM=m +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_CS=m +CONFIG_NET_WIRELESS=y + +# +# PCMCIA network device support +# +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +CONFIG_PCMCIA_PCNET=m +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPPOE is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_KEYBOARD_CORGI=y +CONFIG_KEYBOARD_SPITZ=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_CORGI=y +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_UINPUT=m + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=m +CONFIG_SERIAL_8250_CS=m +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# I2C support +# +CONFIG_I2C=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m + +# +# Video For Linux +# + +# +# Video Adapters +# +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set +# CONFIG_VIDEO_OVCAMCHIP is not set + +# +# Radio Adapters +# +# CONFIG_RADIO_MAESTRO is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_PXA is not set +CONFIG_FB_W100=y +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set + +# +# Logo configuration +# +# CONFIG_LOGO is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_DEVICE=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CORGI=y + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +# CONFIG_SND is not set + +# +# Open Sound System +# +CONFIG_SOUND_PRIME=y +# CONFIG_SOUND_MSNDCLAS is not set +# CONFIG_SOUND_MSNDPIN is not set +CONFIG_SOUND_OSS=y +# CONFIG_SOUND_TRACEINIT is not set +# CONFIG_SOUND_DMAP is not set +# CONFIG_SOUND_AD1816 is not set +# CONFIG_SOUND_SGALAXY is not set +# CONFIG_SOUND_ADLIB is not set +# CONFIG_SOUND_ACI_MIXER is not set +# CONFIG_SOUND_CS4232 is not set +# CONFIG_SOUND_SSCAPE is not set +# CONFIG_SOUND_GUS is not set +# CONFIG_SOUND_VMIDI is not set +# CONFIG_SOUND_TRIX is not set +# CONFIG_SOUND_MSS is not set +# CONFIG_SOUND_MPU401 is not set +# CONFIG_SOUND_NM256 is not set +# CONFIG_SOUND_MAD16 is not set +# CONFIG_SOUND_PAS is not set +# CONFIG_SOUND_PSS is not set +# CONFIG_SOUND_SB is not set +# CONFIG_SOUND_AWE32_SYNTH is not set +# CONFIG_SOUND_WAVEFRONT is not set +# CONFIG_SOUND_MAUI is not set +# CONFIG_SOUND_YM3812 is not set +# CONFIG_SOUND_OPL3SA1 is not set +# CONFIG_SOUND_OPL3SA2 is not set +# CONFIG_SOUND_UART6850 is not set +# CONFIG_SOUND_AEDSP16 is not set +# CONFIG_SOUND_TVMIXER is not set +# CONFIG_SOUND_AD1980 is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_SL811_HCD=m +CONFIG_USB_SL811_CS=m + +# +# USB Device Class drivers +# +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set + +# +# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +CONFIG_USB_KBD=m +CONFIG_USB_MOUSE=m +CONFIG_USB_AIPTEK=m +CONFIG_USB_WACOM=m +# CONFIG_USB_ACECAD is not set +CONFIG_USB_KBTAB=m +CONFIG_USB_POWERMATE=m +CONFIG_USB_MTOUCH=m +# CONFIG_USB_ITMTOUCH is not set +CONFIG_USB_EGALAX=m +# CONFIG_USB_YEALINK is not set +CONFIG_USB_XPAD=m +CONFIG_USB_ATI_REMOTE=m +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m + +# +# USB Multimedia devices +# +CONFIG_USB_DABUSB=m +CONFIG_USB_VICAM=m +CONFIG_USB_DSBR=m +CONFIG_USB_IBMCAM=m +CONFIG_USB_KONICAWC=m +CONFIG_USB_OV511=m +CONFIG_USB_SE401=m +CONFIG_USB_SN9C102=m +CONFIG_USB_STV680=m +# CONFIG_USB_PWC is not set + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +CONFIG_USB_NET_ZAURUS=m +# CONFIG_USB_ZD1201 is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set +CONFIG_USB_SERIAL_BELKIN=m +# CONFIG_USB_SERIAL_WHITEHEAT is not set +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +CONFIG_USB_AUERSWALD=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +CONFIG_USB_LED=m +CONFIG_USB_CYTHERM=m +CONFIG_USB_PHIDGETKIT=m +CONFIG_USB_PHIDGETSERVO=m +CONFIG_USB_IDMOUSE=m +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_NET2280 is not set +CONFIG_USB_GADGET_PXA2XX=y +CONFIG_USB_PXA2XX=y +# CONFIG_USB_PXA2XX_SMALL is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m + +# +# MMC/SD Card support +# +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_BLOCK=y +CONFIG_MMC_PXA=y +# CONFIG_MMC_WBSD is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +CONFIG_SMB_NLS_DEFAULT=y +CONFIG_SMB_NLS_REMOTE="cp437" +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=m + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_WAITQ is not set +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y -- cgit v0.10.2 From 71e2b2ecc1c44cb4f2f3e68827af8b90246becac Mon Sep 17 00:00:00 2001 From: Vincent Sanders Date: Mon, 10 Oct 2005 18:24:09 +0100 Subject: [ARM] 2968/1: defconfig for the ARM Collie platform Patch from Vincent Sanders Add a defconfig for the ARM Collie platform Signed-off-by: Richard Purdie Signed-off-by: Vincent Sanders Signed-off-by: Russell King diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig new file mode 100644 index 0000000..40dfe07 --- /dev/null +++ b/arch/arm/configs/collie_defconfig @@ -0,0 +1,888 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc3 +# Sun Oct 9 16:55:14 2005 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +# CONFIG_CLEAN_COMPILE is not set +CONFIG_BROKEN=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +CONFIG_ARCH_SA1100=y +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set + +# +# SA11x0 Implementations +# +# CONFIG_SA1100_ASSABET is not set +# CONFIG_SA1100_CERF is not set +CONFIG_SA1100_COLLIE=y +# CONFIG_SA1100_H3100 is not set +# CONFIG_SA1100_H3600 is not set +# CONFIG_SA1100_H3800 is not set +# CONFIG_SA1100_BADGE4 is not set +# CONFIG_SA1100_JORNADA720 is not set +# CONFIG_SA1100_HACKKIT is not set +# CONFIG_SA1100_LART is not set +# CONFIG_SA1100_PLEB is not set +# CONFIG_SA1100_SHANNON is not set +# CONFIG_SA1100_SIMPAD is not set +# CONFIG_SA1100_SSP is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_SA1100=y +CONFIG_CPU_32v4=y +CONFIG_CPU_ABRT_EV4=y +CONFIG_CPU_CACHE_V4WB=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WB=y + +# +# Processor Features +# +CONFIG_SHARP_LOCOMO=y +CONFIG_SHARP_PARAM=y +CONFIG_SHARP_SCOOP=y + +# +# Bus support +# +CONFIG_ISA=y +CONFIG_ISA_DMA_API=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_SMP is not set +CONFIG_PREEMPT=y +# CONFIG_NO_IDLE_HZ is not set +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug" +# CONFIG_XIP_KERNEL is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m +# CONFIG_ARTHUR is not set + +# +# Power management options +# +CONFIG_PM=y +CONFIG_APM=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +CONFIG_MTD_OBSOLETE_CHIPS=y +# CONFIG_MTD_AMDSTD is not set +CONFIG_MTD_SHARP=y +# CONFIG_MTD_JEDEC is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNP is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_XD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_ATA_OVER_ETH=m + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# + +# +# Network device support +# +# CONFIG_NETDEVICES is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_TSDEV=y +CONFIG_INPUT_TSDEV_SCREEN_X=240 +CONFIG_INPUT_TSDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_EVBUG=y + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_LOCOMO=y +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SA1100=y +CONFIG_SERIAL_SA1100_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# I2C support +# +CONFIG_I2C=m +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=m +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ELEKTOR is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# +# CONFIG_MCP_SA11X0 is not set + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m + +# +# Video For Linux +# + +# +# Video Adapters +# +# CONFIG_VIDEO_PMS is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set +# CONFIG_VIDEO_OVCAMCHIP is not set + +# +# Radio Adapters +# +# CONFIG_RADIO_CADET is not set +# CONFIG_RADIO_RTRACK is not set +# CONFIG_RADIO_RTRACK2 is not set +# CONFIG_RADIO_AZTECH is not set +# CONFIG_RADIO_GEMTEK is not set +# CONFIG_RADIO_MAESTRO is not set +# CONFIG_RADIO_SF16FMI is not set +# CONFIG_RADIO_SF16FMR2 is not set +# CONFIG_RADIO_TERRATEC is not set +# CONFIG_RADIO_TRUST is not set +# CONFIG_RADIO_TYPHOON is not set +# CONFIG_RADIO_ZOLTRIX is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_SA1100=y +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +# CONFIG_MDA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set + +# +# Logo configuration +# +# CONFIG_LOGO is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB is not set + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_ROMFS_FS=y +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_WAITQ is not set +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y -- cgit v0.10.2 From edea3ab58f8edd5f72d31f891ab4f34382e97e3a Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Mon, 10 Oct 2005 17:53:58 -0400 Subject: libata: add new driver pdc_adma for PDC ADMA ATA cards diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index be96cb7..e2845b4 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -489,11 +489,11 @@ config SCSI_SATA_NV If unsure, say N. -config SCSI_SATA_PROMISE - tristate "Promise SATA TX2/TX4 support" +config SCSI_PDC_ADMA + tristate "Pacific Digital ADMA support" depends on SCSI_SATA && PCI help - This option enables support for Promise Serial ATA TX2/TX4. + This option enables support for Pacific Digital ADMA controllers If unsure, say N. @@ -505,6 +505,14 @@ config SCSI_SATA_QSTOR If unsure, say N. +config SCSI_SATA_PROMISE + tristate "Promise SATA TX2/TX4 support" + depends on SCSI_SATA && PCI + help + This option enables support for Promise Serial ATA TX2/TX4. + + If unsure, say N. + config SCSI_SATA_SX4 tristate "Promise SATA SX4 support" depends on SCSI_SATA && PCI && EXPERIMENTAL diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index e2e3d86..2d44398 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -138,6 +138,7 @@ obj-$(CONFIG_SCSI_SATA_SX4) += libata.o sata_sx4.o obj-$(CONFIG_SCSI_SATA_NV) += libata.o sata_nv.o obj-$(CONFIG_SCSI_SATA_ULI) += libata.o sata_uli.o obj-$(CONFIG_SCSI_SATA_MV) += libata.o sata_mv.o +obj-$(CONFIG_SCSI_PDC_ADMA) += libata.o pdc_adma.o obj-$(CONFIG_ARM) += arm/ diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c new file mode 100644 index 0000000..ce006a5 --- /dev/null +++ b/drivers/scsi/pdc_adma.c @@ -0,0 +1,737 @@ +/* + * pdc_adma.c - Pacific Digital Corporation ADMA + * + * Maintained by: Mark Lord + * + * Copyright 2005 Mark Lord + * + * The contents of this file are subject to the Open + * Software License version 1.1 that can be found at + * http://www.opensource.org/licenses/osl-1.1.txt and is included herein + * by reference. + * + * Alternatively, the contents of this file may be used under the terms + * of the GNU General Public License version 2 (the "GPL") as distributed + * in the kernel source COPYING file, in which case the provisions of + * the GPL are applicable instead of the above. If you wish to allow + * the use of your version of this file only under the terms of the + * GPL and not to allow others to use your version of this file under + * the OSL, indicate your decision by deleting the provisions above and + * replace them with the notice and other provisions required by the GPL. + * If you do not delete the provisions above, a recipient may use your + * version of this file under either the OSL or the GPL. + * + * Supports ATA disks in single-packet ADMA mode. + * Uses PIO for everything else. + * + * TODO: Use ADMA transfers for ATAPI devices, when possible. + * This requires careful attention to a number of quirks of the chip. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "scsi.h" +#include +#include +#include + +#define DRV_NAME "pdc_adma" +#define DRV_VERSION "0.01" + +/* macro to calculate base address for ATA regs */ +#define ADMA_ATA_REGS(base,port_no) ((base) + ((port_no) * 0x40)) + +/* macro to calculate base address for ADMA regs */ +#define ADMA_REGS(base,port_no) ((base) + 0x80 + ((port_no) * 0x20)) + +enum { + ADMA_PORTS = 2, + ADMA_CPB_BYTES = 40, + ADMA_PRD_BYTES = LIBATA_MAX_PRD * 16, + ADMA_PKT_BYTES = ADMA_CPB_BYTES + ADMA_PRD_BYTES, + + ADMA_DMA_BOUNDARY = 0xffffffff, + + /* global register offsets */ + ADMA_MODE_LOCK = 0x00c7, + + /* per-channel register offsets */ + ADMA_CONTROL = 0x0000, /* ADMA control */ + ADMA_STATUS = 0x0002, /* ADMA status */ + ADMA_CPB_COUNT = 0x0004, /* CPB count */ + ADMA_CPB_CURRENT = 0x000c, /* current CPB address */ + ADMA_CPB_NEXT = 0x000c, /* next CPB address */ + ADMA_CPB_LOOKUP = 0x0010, /* CPB lookup table */ + ADMA_FIFO_IN = 0x0014, /* input FIFO threshold */ + ADMA_FIFO_OUT = 0x0016, /* output FIFO threshold */ + + /* ADMA_CONTROL register bits */ + aNIEN = (1 << 8), /* irq mask: 1==masked */ + aGO = (1 << 7), /* packet trigger ("Go!") */ + aRSTADM = (1 << 5), /* ADMA logic reset */ + aAUTEN = (1 << 3), /* packet trigger ("Go!") */ + aRSTA = (1 << 2), /* ATA hard reset */ + aPIOMD4 = 0x0003, /* PIO mode 4 */ + + /* ADMA_STATUS register bits */ + aPSD = (1 << 6), + aUIRQ = (1 << 4), + aPERR = (1 << 0), + + /* CPB bits */ + cDONE = (1 << 0), + cVLD = (1 << 0), + cDAT = (1 << 2), + cIEN = (1 << 3), + + /* PRD bits */ + pORD = (1 << 4), + pDIRO = (1 << 5), + pEND = (1 << 7), + + /* ATA register flags */ + rIGN = (1 << 5), + rEND = (1 << 7), + + /* ATA register addresses */ + ADMA_REGS_CONTROL = 0x0e, + ADMA_REGS_SECTOR_COUNT = 0x12, + ADMA_REGS_LBA_LOW = 0x13, + ADMA_REGS_LBA_MID = 0x14, + ADMA_REGS_LBA_HIGH = 0x15, + ADMA_REGS_DEVICE = 0x16, + ADMA_REGS_COMMAND = 0x17, + + /* PCI device IDs */ + board_1841_idx = 0, /* ADMA 2-port controller */ +}; + +typedef enum { adma_state_idle, adma_state_pkt, adma_state_mmio } adma_state_t; + +struct adma_port_priv { + u8 *pkt; + dma_addr_t pkt_dma; + adma_state_t state; +}; + +static int adma_ata_init_one (struct pci_dev *pdev, + const struct pci_device_id *ent); +static irqreturn_t adma_intr (int irq, void *dev_instance, + struct pt_regs *regs); +static int adma_port_start(struct ata_port *ap); +static void adma_host_stop(struct ata_host_set *host_set); +static void adma_port_stop(struct ata_port *ap); +static void adma_phy_reset(struct ata_port *ap); +static void adma_qc_prep(struct ata_queued_cmd *qc); +static int adma_qc_issue(struct ata_queued_cmd *qc); +static int adma_check_atapi_dma(struct ata_queued_cmd *qc); +static void adma_bmdma_stop(struct ata_queued_cmd *qc); +static u8 adma_bmdma_status(struct ata_port *ap); +static void adma_irq_clear(struct ata_port *ap); +static void adma_eng_timeout(struct ata_port *ap); + +static Scsi_Host_Template adma_ata_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .eh_strategy_handler = ata_scsi_error, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ENABLE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ADMA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations adma_ata_ops = { + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .check_atapi_dma = adma_check_atapi_dma, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + .phy_reset = adma_phy_reset, + .qc_prep = adma_qc_prep, + .qc_issue = adma_qc_issue, + .eng_timeout = adma_eng_timeout, + .irq_handler = adma_intr, + .irq_clear = adma_irq_clear, + .port_start = adma_port_start, + .port_stop = adma_port_stop, + .host_stop = adma_host_stop, + .bmdma_stop = adma_bmdma_stop, + .bmdma_status = adma_bmdma_status, +}; + +static struct ata_port_info adma_port_info[] = { + /* board_1841_idx */ + { + .sht = &adma_ata_sht, + .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | + ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO, + .pio_mask = 0x10, /* pio4 */ + .udma_mask = 0x1f, /* udma0-4 */ + .port_ops = &adma_ata_ops, + }, +}; + +static struct pci_device_id adma_ata_pci_tbl[] = { + { PCI_VENDOR_ID_PDC, 0x1841, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_1841_idx }, + + { } /* terminate list */ +}; + +static struct pci_driver adma_ata_pci_driver = { + .name = DRV_NAME, + .id_table = adma_ata_pci_tbl, + .probe = adma_ata_init_one, + .remove = ata_pci_remove_one, +}; + +static int adma_check_atapi_dma(struct ata_queued_cmd *qc) +{ + return 1; /* ATAPI DMA not yet supported */ +} + +static void adma_bmdma_stop(struct ata_queued_cmd *qc) +{ + /* nothing */ +} + +static u8 adma_bmdma_status(struct ata_port *ap) +{ + return 0; +} + +static void adma_irq_clear(struct ata_port *ap) +{ + /* nothing */ +} + +static void adma_reset_engine(void __iomem *chan) +{ + /* reset ADMA to idle state */ + writew(aPIOMD4 | aNIEN | aRSTADM, chan + ADMA_CONTROL); + udelay(2); + writew(aPIOMD4, chan + ADMA_CONTROL); + udelay(2); +} + +static void adma_reinit_engine(struct ata_port *ap) +{ + struct adma_port_priv *pp = ap->private_data; + void __iomem *mmio_base = ap->host_set->mmio_base; + void __iomem *chan = ADMA_REGS(mmio_base, ap->port_no); + + /* mask/clear ATA interrupts */ + writeb(ATA_NIEN, (void __iomem *)ap->ioaddr.ctl_addr); + ata_check_status(ap); + + /* reset the ADMA engine */ + adma_reset_engine(chan); + + /* set in-FIFO threshold to 0x100 */ + writew(0x100, chan + ADMA_FIFO_IN); + + /* set CPB pointer */ + writel((u32)pp->pkt_dma, chan + ADMA_CPB_NEXT); + + /* set out-FIFO threshold to 0x100 */ + writew(0x100, chan + ADMA_FIFO_OUT); + + /* set CPB count */ + writew(1, chan + ADMA_CPB_COUNT); + + /* read/discard ADMA status */ + readb(chan + ADMA_STATUS); +} + +static inline void adma_enter_reg_mode(struct ata_port *ap) +{ + void __iomem *chan = ADMA_REGS(ap->host_set->mmio_base, ap->port_no); + + writew(aPIOMD4, chan + ADMA_CONTROL); + readb(chan + ADMA_STATUS); /* flush */ +} + +static void adma_phy_reset(struct ata_port *ap) +{ + struct adma_port_priv *pp = ap->private_data; + + pp->state = adma_state_idle; + adma_reinit_engine(ap); + ata_port_probe(ap); + ata_bus_reset(ap); +} + +static void adma_eng_timeout(struct ata_port *ap) +{ + struct adma_port_priv *pp = ap->private_data; + + if (pp->state != adma_state_idle) /* healthy paranoia */ + pp->state = adma_state_mmio; + adma_reinit_engine(ap); + ata_eng_timeout(ap); +} + +static int adma_fill_sg(struct ata_queued_cmd *qc) +{ + struct scatterlist *sg = qc->sg; + struct ata_port *ap = qc->ap; + struct adma_port_priv *pp = ap->private_data; + u8 *buf = pp->pkt; + int nelem, i = (2 + buf[3]) * 8; + u8 pFLAGS = pORD | ((qc->tf.flags & ATA_TFLAG_WRITE) ? pDIRO : 0); + + for (nelem = 0; nelem < qc->n_elem; nelem++,sg++) { + u32 addr; + u32 len; + + addr = (u32)sg_dma_address(sg); + *(__le32 *)(buf + i) = cpu_to_le32(addr); + i += 4; + + len = sg_dma_len(sg) >> 3; + *(__le32 *)(buf + i) = cpu_to_le32(len); + i += 4; + + if ((nelem + 1) == qc->n_elem) + pFLAGS |= pEND; + buf[i++] = pFLAGS; + buf[i++] = qc->dev->dma_mode & 0xf; + buf[i++] = 0; /* pPKLW */ + buf[i++] = 0; /* reserved */ + + *(__le32 *)(buf + i) + = (pFLAGS & pEND) ? 0 : cpu_to_le32(pp->pkt_dma + i + 4); + i += 4; + + VPRINTK("PRD[%u] = (0x%lX, 0x%X)\n", nelem, + (unsigned long)addr, len); + } + return i; +} + +static void adma_qc_prep(struct ata_queued_cmd *qc) +{ + struct adma_port_priv *pp = qc->ap->private_data; + u8 *buf = pp->pkt; + u32 pkt_dma = (u32)pp->pkt_dma; + int i = 0; + + VPRINTK("ENTER\n"); + + adma_enter_reg_mode(qc->ap); + if (qc->tf.protocol != ATA_PROT_DMA) { + ata_qc_prep(qc); + return; + } + + buf[i++] = 0; /* Response flags */ + buf[i++] = 0; /* reserved */ + buf[i++] = cVLD | cDAT | cIEN; + i++; /* cLEN, gets filled in below */ + + *(__le32 *)(buf+i) = cpu_to_le32(pkt_dma); /* cNCPB */ + i += 4; /* cNCPB */ + i += 4; /* cPRD, gets filled in below */ + + buf[i++] = 0; /* reserved */ + buf[i++] = 0; /* reserved */ + buf[i++] = 0; /* reserved */ + buf[i++] = 0; /* reserved */ + + /* ATA registers; must be a multiple of 4 */ + buf[i++] = qc->tf.device; + buf[i++] = ADMA_REGS_DEVICE; + if ((qc->tf.flags & ATA_TFLAG_LBA48)) { + buf[i++] = qc->tf.hob_nsect; + buf[i++] = ADMA_REGS_SECTOR_COUNT; + buf[i++] = qc->tf.hob_lbal; + buf[i++] = ADMA_REGS_LBA_LOW; + buf[i++] = qc->tf.hob_lbam; + buf[i++] = ADMA_REGS_LBA_MID; + buf[i++] = qc->tf.hob_lbah; + buf[i++] = ADMA_REGS_LBA_HIGH; + } + buf[i++] = qc->tf.nsect; + buf[i++] = ADMA_REGS_SECTOR_COUNT; + buf[i++] = qc->tf.lbal; + buf[i++] = ADMA_REGS_LBA_LOW; + buf[i++] = qc->tf.lbam; + buf[i++] = ADMA_REGS_LBA_MID; + buf[i++] = qc->tf.lbah; + buf[i++] = ADMA_REGS_LBA_HIGH; + buf[i++] = 0; + buf[i++] = ADMA_REGS_CONTROL; + buf[i++] = rIGN; + buf[i++] = 0; + buf[i++] = qc->tf.command; + buf[i++] = ADMA_REGS_COMMAND | rEND; + + buf[3] = (i >> 3) - 2; /* cLEN */ + *(__le32 *)(buf+8) = cpu_to_le32(pkt_dma + i); /* cPRD */ + + i = adma_fill_sg(qc); + wmb(); /* flush PRDs and pkt to memory */ +#if 0 + /* dump out CPB + PRDs for debug */ + { + int j, len = 0; + static char obuf[2048]; + for (j = 0; j < i; ++j) { + len += sprintf(obuf+len, "%02x ", buf[j]); + if ((j & 7) == 7) { + printk("%s\n", obuf); + len = 0; + } + } + if (len) + printk("%s\n", obuf); + } +#endif +} + +static inline void adma_packet_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *chan = ADMA_REGS(ap->host_set->mmio_base, ap->port_no); + + VPRINTK("ENTER, ap %p\n", ap); + + /* fire up the ADMA engine */ + writew(aPIOMD4 | aGO | aAUTEN, chan + ADMA_CONTROL); +} + +static int adma_qc_issue(struct ata_queued_cmd *qc) +{ + struct adma_port_priv *pp = qc->ap->private_data; + + switch (qc->tf.protocol) { + case ATA_PROT_DMA: + pp->state = adma_state_pkt; + adma_packet_start(qc); + return 0; + + case ATA_PROT_ATAPI_DMA: + BUG(); + break; + + default: + break; + } + + pp->state = adma_state_mmio; + return ata_qc_issue_prot(qc); +} + +static inline unsigned int adma_intr_pkt(struct ata_host_set *host_set) +{ + unsigned int handled = 0, port_no; + u8 __iomem *mmio_base = host_set->mmio_base; + + for (port_no = 0; port_no < host_set->n_ports; ++port_no) { + struct ata_port *ap = host_set->ports[port_no]; + struct adma_port_priv *pp; + struct ata_queued_cmd *qc; + void __iomem *chan = ADMA_REGS(mmio_base, port_no); + u8 drv_stat, status = readb(chan + ADMA_STATUS); + + if (status == 0) + continue; + handled = 1; + adma_enter_reg_mode(ap); + if ((ap->flags & ATA_FLAG_PORT_DISABLED)) + continue; + pp = ap->private_data; + if (!pp || pp->state != adma_state_pkt) + continue; + qc = ata_qc_from_tag(ap, ap->active_tag); + drv_stat = 0; + if ((status & (aPERR | aPSD | aUIRQ))) + drv_stat = ATA_ERR; + else if (pp->pkt[0] != cDONE) + drv_stat = ATA_ERR; + ata_qc_complete(qc, drv_stat); + } + return handled; +} + +static inline unsigned int adma_intr_mmio(struct ata_host_set *host_set) +{ + unsigned int handled = 0, port_no; + + for (port_no = 0; port_no < host_set->n_ports; ++port_no) { + struct ata_port *ap; + ap = host_set->ports[port_no]; + if (ap && (!(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR)))) { + struct ata_queued_cmd *qc; + struct adma_port_priv *pp = ap->private_data; + if (!pp || pp->state != adma_state_mmio) + continue; + qc = ata_qc_from_tag(ap, ap->active_tag); + if (qc && (!(qc->tf.ctl & ATA_NIEN))) { + + /* check main status, clearing INTRQ */ + u8 status = ata_chk_status(ap); + if ((status & ATA_BUSY)) + continue; + DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n", + ap->id, qc->tf.protocol, status); + + /* complete taskfile transaction */ + pp->state = adma_state_idle; + ata_qc_complete(qc, status); + handled = 1; + } + } + } + return handled; +} + +static irqreturn_t adma_intr(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct ata_host_set *host_set = dev_instance; + unsigned int handled = 0; + + VPRINTK("ENTER\n"); + + spin_lock(&host_set->lock); + handled = adma_intr_pkt(host_set) | adma_intr_mmio(host_set); + spin_unlock(&host_set->lock); + + VPRINTK("EXIT\n"); + + return IRQ_RETVAL(handled); +} + +static void adma_ata_setup_port(struct ata_ioports *port, unsigned long base) +{ + port->cmd_addr = + port->data_addr = base + 0x000; + port->error_addr = + port->feature_addr = base + 0x004; + port->nsect_addr = base + 0x008; + port->lbal_addr = base + 0x00c; + port->lbam_addr = base + 0x010; + port->lbah_addr = base + 0x014; + port->device_addr = base + 0x018; + port->status_addr = + port->command_addr = base + 0x01c; + port->altstatus_addr = + port->ctl_addr = base + 0x038; +} + +static int adma_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct adma_port_priv *pp; + int rc; + + rc = ata_port_start(ap); + if (rc) + return rc; + adma_enter_reg_mode(ap); + rc = -ENOMEM; + pp = kcalloc(1, sizeof(*pp), GFP_KERNEL); + if (!pp) + goto err_out; + pp->pkt = dma_alloc_coherent(dev, ADMA_PKT_BYTES, &pp->pkt_dma, + GFP_KERNEL); + if (!pp->pkt) + goto err_out_kfree; + /* paranoia? */ + if ((pp->pkt_dma & 7) != 0) { + printk("bad alignment for pp->pkt_dma: %08x\n", + (u32)pp->pkt_dma); + goto err_out_kfree2; + } + memset(pp->pkt, 0, ADMA_PKT_BYTES); + ap->private_data = pp; + adma_reinit_engine(ap); + return 0; + +err_out_kfree2: + kfree(pp); +err_out_kfree: + kfree(pp); +err_out: + ata_port_stop(ap); + return rc; +} + +static void adma_port_stop(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct adma_port_priv *pp = ap->private_data; + + adma_reset_engine(ADMA_REGS(ap->host_set->mmio_base, ap->port_no)); + if (pp != NULL) { + ap->private_data = NULL; + if (pp->pkt != NULL) + dma_free_coherent(dev, ADMA_PKT_BYTES, + pp->pkt, pp->pkt_dma); + kfree(pp); + } + ata_port_stop(ap); +} + +static void adma_host_stop(struct ata_host_set *host_set) +{ + unsigned int port_no; + + for (port_no = 0; port_no < ADMA_PORTS; ++port_no) + adma_reset_engine(ADMA_REGS(host_set->mmio_base, port_no)); + + ata_pci_host_stop(host_set); +} + +static void adma_host_init(unsigned int chip_id, + struct ata_probe_ent *probe_ent) +{ + unsigned int port_no; + void __iomem *mmio_base = probe_ent->mmio_base; + + /* enable/lock aGO operation */ + writeb(7, mmio_base + ADMA_MODE_LOCK); + + /* reset the ADMA logic */ + for (port_no = 0; port_no < ADMA_PORTS; ++port_no) + adma_reset_engine(ADMA_REGS(mmio_base, port_no)); +} + +static int adma_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base) +{ + int rc; + + rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + printk(KERN_ERR DRV_NAME + "(%s): 32-bit DMA enable failed\n", + pci_name(pdev)); + return rc; + } + rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + printk(KERN_ERR DRV_NAME + "(%s): 32-bit consistent DMA enable failed\n", + pci_name(pdev)); + return rc; + } + return 0; +} + +static int adma_ata_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + static int printed_version; + struct ata_probe_ent *probe_ent = NULL; + void __iomem *mmio_base; + unsigned int board_idx = (unsigned int) ent->driver_data; + int rc, port_no; + + if (!printed_version++) + printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + + rc = pci_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) + goto err_out; + + if ((pci_resource_flags(pdev, 4) & IORESOURCE_MEM) == 0) { + rc = -ENODEV; + goto err_out_regions; + } + + mmio_base = pci_iomap(pdev, 4, 0); + if (mmio_base == NULL) { + rc = -ENOMEM; + goto err_out_regions; + } + + rc = adma_set_dma_masks(pdev, mmio_base); + if (rc) + goto err_out_iounmap; + + probe_ent = kcalloc(1, sizeof(*probe_ent), GFP_KERNEL); + if (probe_ent == NULL) { + rc = -ENOMEM; + goto err_out_iounmap; + } + + probe_ent->dev = pci_dev_to_dev(pdev); + INIT_LIST_HEAD(&probe_ent->node); + + probe_ent->sht = adma_port_info[board_idx].sht; + probe_ent->host_flags = adma_port_info[board_idx].host_flags; + probe_ent->pio_mask = adma_port_info[board_idx].pio_mask; + probe_ent->mwdma_mask = adma_port_info[board_idx].mwdma_mask; + probe_ent->udma_mask = adma_port_info[board_idx].udma_mask; + probe_ent->port_ops = adma_port_info[board_idx].port_ops; + + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = SA_SHIRQ; + probe_ent->mmio_base = mmio_base; + probe_ent->n_ports = ADMA_PORTS; + + for (port_no = 0; port_no < probe_ent->n_ports; ++port_no) { + adma_ata_setup_port(&probe_ent->port[port_no], + ADMA_ATA_REGS((unsigned long)mmio_base, port_no)); + } + + pci_set_master(pdev); + + /* initialize adapter */ + adma_host_init(board_idx, probe_ent); + + rc = ata_device_add(probe_ent); + kfree(probe_ent); + if (rc != ADMA_PORTS) + goto err_out_iounmap; + return 0; + +err_out_iounmap: + pci_iounmap(pdev, mmio_base); +err_out_regions: + pci_release_regions(pdev); +err_out: + pci_disable_device(pdev); + return rc; +} + +static int __init adma_ata_init(void) +{ + return pci_module_init(&adma_ata_pci_driver); +} + +static void __exit adma_ata_exit(void) +{ + pci_unregister_driver(&adma_ata_pci_driver); +} + +MODULE_AUTHOR("Mark Lord"); +MODULE_DESCRIPTION("Pacific Digital Corporation ADMA low-level driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, adma_ata_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +module_init(adma_ata_init); +module_exit(adma_ata_exit); -- cgit v0.10.2 From 094804c5a132f04c12dd4902ee15c64362e5c1af Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 11 Oct 2005 01:03:39 +0200 Subject: [PATCH] x86_64: Fix change_page_attr cache flushing Noticed by Terence Ripperda Undo wrong change in global_flush_tlb. We need to flush the caches in all cases, not just when pages were reverted. This was a bogus optimization added earlier, but it was wrong. Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds diff --git a/arch/x86_64/mm/pageattr.c b/arch/x86_64/mm/pageattr.c index 94862e1..b90e8fe 100644 --- a/arch/x86_64/mm/pageattr.c +++ b/arch/x86_64/mm/pageattr.c @@ -220,8 +220,6 @@ void global_flush_tlb(void) down_read(&init_mm.mmap_sem); df = xchg(&df_list, NULL); up_read(&init_mm.mmap_sem); - if (!df) - return; flush_map((df && !df->next) ? df->address : 0); for (; df; df = next_df) { next_df = df->next; -- cgit v0.10.2 From 5d8e1b181c4ad63e6ca90d51287b31afd400d2eb Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 10 Oct 2005 16:12:13 -0700 Subject: [SPARC64]: Fix Ultra5, Ultra60, et al. boot failures. On the boot processor, we need to do the move onto the Linux trap table a little bit differently else we'll take unhandlable faults in the firmware address space. Previously we would do the following: 1) Disable PSTATE_IE in %pstate. 2) Set %tba by hand to sparc64_ttable_tl0 3) Initialize alternate, mmu, and interrupt global trap registers. 4) Call prom_set_traptable() That doesn't work very well actually with the way we boot the kernel VM these days. It worked by luck on many systems because the firmware accesses for the prom_set_traptable() call happened to be loaded into the TLB already, something we cannot assume. So the new scheme is this: 1) Clear PSTATE_IE in %pstate and set %pil to 15 2) Call prom_set_traptable() 3) Initialize alternate, mmu, and interrupt global trap registers. and this works quite well. This sequence has been moved into a callable function in assembler named setup-trap_table(). The idea is that eventually trampoline.S can use this code as well. That isn't possible currently due to some complications, but eventually we should be able to do it. Thanks to Meelis Roos for the Ultra5 boot failure report. Signed-off-by: David S. Miller diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S index 2434049..f1dcdf8 100644 --- a/arch/sparc64/kernel/head.S +++ b/arch/sparc64/kernel/head.S @@ -382,32 +382,79 @@ tlb_fixup_done: nop /* Not reached... */ -/* IMPORTANT NOTE: Whenever making changes here, check - * trampoline.S as well. -jj */ - .globl setup_tba -setup_tba: /* i0 = is_starfire */ - save %sp, -160, %sp + /* This is meant to allow the sharing of this code between + * boot processor invocation (via setup_tba() below) and + * secondary processor startup (via trampoline.S). The + * former does use this code, the latter does not yet due + * to some complexities. That should be fixed up at some + * point. + */ + .globl setup_trap_table +setup_trap_table: + save %sp, -192, %sp + + /* Force interrupts to be disabled. Transferring over to + * the Linux trap table is a very delicate operation. + * Until we are actually on the Linux trap table, we cannot + * get the PAGE_OFFSET linear mappings translated. We need + * that mapping to be setup in order to initialize the firmware + * page tables. + * + * So there is this window of time, from the return from + * prom_set_trap_table() until inherit_prom_mappings_post() + * (in arch/sparc64/mm/init.c) completes, during which no + * firmware address space accesses can be made. + */ + rdpr %pstate, %o1 + andn %o1, PSTATE_IE, %o1 + wrpr %o1, 0x0, %pstate + wrpr %g0, 15, %pil - rdpr %tba, %g7 - sethi %hi(prom_tba), %o1 - or %o1, %lo(prom_tba), %o1 - stx %g7, [%o1] + /* Ok, now make the final valid firmware call to jump over + * to the Linux trap table. + */ + call prom_set_trap_table + sethi %hi(sparc64_ttable_tl0), %o0 + + /* Start using proper page size encodings in ctx register. */ + sethi %hi(sparc64_kern_pri_context), %g3 + ldx [%g3 + %lo(sparc64_kern_pri_context)], %g2 + mov PRIMARY_CONTEXT, %g1 + stxa %g2, [%g1] ASI_DMMU + membar #Sync + + /* The Linux trap handlers expect various trap global registers + * to be setup with some fixed values. So here we set these + * up very carefully. These globals are: + * + * Alternate Globals (PSTATE_AG): + * + * %g6 --> current_thread_info() + * + * MMU Globals (PSTATE_MG): + * + * %g1 --> TLB_SFSR + * %g2 --> ((_PAGE_VALID | _PAGE_SZ4MB | + * _PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_W) + * ^ 0xfffff80000000000) + * (this %g2 value is used for computing the PAGE_OFFSET kernel + * TLB entries quickly, the virtual address of the fault XOR'd + * with this %g2 value is the PTE to load into the TLB) + * %g3 --> VPTE_BASE_CHEETAH or VPTE_BASE_SPITFIRE + * + * Interrupt Globals (PSTATE_IG, setup by init_irqwork_curcpu()): + * + * %g6 --> __irq_work[smp_processor_id()] + */ - /* Setup "Linux" globals 8-) */ rdpr %pstate, %o1 mov %g6, %o2 - wrpr %o1, (PSTATE_AG|PSTATE_IE), %pstate - sethi %hi(sparc64_ttable_tl0), %g1 - wrpr %g1, %tba + wrpr %o1, PSTATE_AG, %pstate mov %o2, %g6 - /* Set up MMU globals */ - wrpr %o1, (PSTATE_MG|PSTATE_IE), %pstate - - /* Set fixed globals used by dTLB miss handler. */ #define KERN_HIGHBITS ((_PAGE_VALID|_PAGE_SZ4MB)^0xfffff80000000000) #define KERN_LOWBITS (_PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_W) - + wrpr %o1, PSTATE_MG, %pstate mov TSB_REG, %g1 stxa %g0, [%g1] ASI_DMMU membar #Sync @@ -419,17 +466,17 @@ setup_tba: /* i0 = is_starfire */ sllx %g2, 32, %g2 or %g2, KERN_LOWBITS, %g2 - BRANCH_IF_ANY_CHEETAH(g3,g7,cheetah_vpte_base) - ba,pt %xcc, spitfire_vpte_base + BRANCH_IF_ANY_CHEETAH(g3,g7,8f) + ba,pt %xcc, 9f nop -cheetah_vpte_base: +8: sethi %uhi(VPTE_BASE_CHEETAH), %g3 or %g3, %ulo(VPTE_BASE_CHEETAH), %g3 ba,pt %xcc, 2f sllx %g3, 32, %g3 -spitfire_vpte_base: +9: sethi %uhi(VPTE_BASE_SPITFIRE), %g3 or %g3, %ulo(VPTE_BASE_SPITFIRE), %g3 sllx %g3, 32, %g3 @@ -455,29 +502,37 @@ spitfire_vpte_base: sllx %o2, 32, %o2 wr %o2, %asr25 - /* Ok, we're done setting up all the state our trap mechanims needs, - * now get back into normal globals and let the PROM know what is up. - */ 2: wrpr %g0, %g0, %wstate - wrpr %o1, PSTATE_IE, %pstate + wrpr %o1, 0x0, %pstate call init_irqwork_curcpu nop - call prom_set_trap_table - sethi %hi(sparc64_ttable_tl0), %o0 - - /* Start using proper page size encodings in ctx register. */ - sethi %hi(sparc64_kern_pri_context), %g3 - ldx [%g3 + %lo(sparc64_kern_pri_context)], %g2 - mov PRIMARY_CONTEXT, %g1 - stxa %g2, [%g1] ASI_DMMU - membar #Sync - + /* Now we can turn interrupts back on. */ rdpr %pstate, %o1 or %o1, PSTATE_IE, %o1 wrpr %o1, 0, %pstate + wrpr %g0, 0x0, %pil + + ret + restore + + .globl setup_tba +setup_tba: /* i0 = is_starfire */ + save %sp, -192, %sp + + /* The boot processor is the only cpu which invokes this + * routine, the other cpus set things up via trampoline.S. + * So save the OBP trap table address here. + */ + rdpr %tba, %g7 + sethi %hi(prom_tba), %o1 + or %o1, %lo(prom_tba), %o1 + stx %g7, [%o1] + + call setup_trap_table + nop ret restore -- cgit v0.10.2 From 46113830a18847cff8da73005e57bc49c2f95a56 Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Mon, 10 Oct 2005 19:44:29 +0200 Subject: [PATCH] Fix signal sending in usbdevio on async URB completion If a process issues an URB from userspace and (starts to) terminate before the URB comes back, we run into the issue described above. This is because the urb saves a pointer to "current" when it is posted to the device, but there's no guarantee that this pointer is still valid afterwards. In fact, there are three separate issues: 1) the pointer to "current" can become invalid, since the task could be completely gone when the URB completion comes back from the device. 2) Even if the saved task pointer is still pointing to a valid task_struct, task_struct->sighand could have gone meanwhile. 3) Even if the process is perfectly fine, permissions may have changed, and we can no longer send it a signal. So what we do instead, is to save the PID and uid's of the process, and introduce a new kill_proc_info_as_uid() function. Signed-off-by: Harald Welte [ Fixed up types and added symbol exports ] Signed-off-by: Linus Torvalds diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index b4265aa..6c35dcb 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -30,6 +30,8 @@ * Revision history * 22.12.1999 0.1 Initial release (split from proc_usb.c) * 04.01.2000 0.2 Turned into its own filesystem + * 30.09.2005 0.3 Fix user-triggerable oops in async URB delivery + * (CAN-2005-3055) */ /*****************************************************************************/ @@ -58,7 +60,8 @@ static struct class *usb_device_class; struct async { struct list_head asynclist; struct dev_state *ps; - struct task_struct *task; + pid_t pid; + uid_t uid, euid; unsigned int signr; unsigned int ifnum; void __user *userbuffer; @@ -290,7 +293,8 @@ static void async_completed(struct urb *urb, struct pt_regs *regs) sinfo.si_errno = as->urb->status; sinfo.si_code = SI_ASYNCIO; sinfo.si_addr = as->userurb; - send_sig_info(as->signr, &sinfo, as->task); + kill_proc_info_as_uid(as->signr, &sinfo, as->pid, as->uid, + as->euid); } wake_up(&ps->wait); } @@ -988,7 +992,9 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, as->userbuffer = NULL; as->signr = uurb->signr; as->ifnum = ifnum; - as->task = current; + as->pid = current->pid; + as->uid = current->uid; + as->euid = current->euid; if (!(uurb->endpoint & USB_DIR_IN)) { if (copy_from_user(as->urb->transfer_buffer, uurb->buffer, as->urb->transfer_buffer_length)) { free_async(as); diff --git a/include/linux/sched.h b/include/linux/sched.h index c3ba31f..27519df 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1018,6 +1018,7 @@ extern int force_sig_info(int, struct siginfo *, struct task_struct *); extern int __kill_pg_info(int sig, struct siginfo *info, pid_t pgrp); extern int kill_pg_info(int, struct siginfo *, pid_t); extern int kill_proc_info(int, struct siginfo *, pid_t); +extern int kill_proc_info_as_uid(int, struct siginfo *, pid_t, uid_t, uid_t); extern void do_notify_parent(struct task_struct *, int); extern void force_sig(int, struct task_struct *); extern void force_sig_specific(int, struct task_struct *); diff --git a/kernel/signal.c b/kernel/signal.c index cba193c..50c9926 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -1193,6 +1193,40 @@ kill_proc_info(int sig, struct siginfo *info, pid_t pid) return error; } +/* like kill_proc_info(), but doesn't use uid/euid of "current" */ +int kill_proc_info_as_uid(int sig, struct siginfo *info, pid_t pid, + uid_t uid, uid_t euid) +{ + int ret = -EINVAL; + struct task_struct *p; + + if (!valid_signal(sig)) + return ret; + + read_lock(&tasklist_lock); + p = find_task_by_pid(pid); + if (!p) { + ret = -ESRCH; + goto out_unlock; + } + if ((!info || ((unsigned long)info != 1 && + (unsigned long)info != 2 && SI_FROMUSER(info))) + && (euid != p->suid) && (euid != p->uid) + && (uid != p->suid) && (uid != p->uid)) { + ret = -EPERM; + goto out_unlock; + } + if (sig && p->sighand) { + unsigned long flags; + spin_lock_irqsave(&p->sighand->siglock, flags); + ret = __group_send_sig_info(sig, info, p); + spin_unlock_irqrestore(&p->sighand->siglock, flags); + } +out_unlock: + read_unlock(&tasklist_lock); + return ret; +} +EXPORT_SYMBOL_GPL(kill_proc_info_as_uid); /* * kill_something_info() interprets pid in interesting ways just like kill(2). -- cgit v0.10.2 From d7dd8a72ab8d305fbe1c4bb571e0633eba3a8d23 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 10 Oct 2005 16:31:30 -0700 Subject: Use the new "kill_proc_info_as_uid()" for USB disconnect too All the same issues - we can't just save the pointer to the thread, we must save the pid/uid/euid combination. Signed-off-by: Linus Torvalds diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 6c35dcb..487ff67 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -530,7 +530,9 @@ static int usbdev_open(struct inode *inode, struct file *file) INIT_LIST_HEAD(&ps->async_completed); init_waitqueue_head(&ps->wait); ps->discsignr = 0; - ps->disctask = current; + ps->disc_pid = current->pid; + ps->disc_uid = current->uid; + ps->disc_euid = current->euid; ps->disccontext = NULL; ps->ifclaimed = 0; wmb(); diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c index 640f41e..d07bba0 100644 --- a/drivers/usb/core/inode.c +++ b/drivers/usb/core/inode.c @@ -713,7 +713,7 @@ void usbfs_remove_device(struct usb_device *dev) sinfo.si_errno = EPIPE; sinfo.si_code = SI_ASYNCIO; sinfo.si_addr = ds->disccontext; - send_sig_info(ds->discsignr, &sinfo, ds->disctask); + kill_proc_info_as_uid(ds->discsignr, &sinfo, ds->disc_pid, ds->disc_uid, ds->disc_euid); } } usbfs_update_special(); diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 83d48c8..e6504f3 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -52,7 +52,8 @@ struct dev_state { struct list_head async_completed; wait_queue_head_t wait; /* wake up if a request completed */ unsigned int discsignr; - struct task_struct *disctask; + pid_t disc_pid; + uid_t disc_uid, disc_euid; void __user *disccontext; unsigned long ifclaimed; }; -- cgit v0.10.2 From 421c7ce6d001fce28b1fa8fdd2e7ded0ed8a0ad5 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 10 Oct 2005 22:32:45 +0200 Subject: [PATCH] x86_64: Allocate cpu local data for all possible CPUs CPU hotplug fills up the possible map to NR_CPUs, but it did that after setting up per CPU data. This lead to CPU data not getting allocated for all possible CPUs, which lead to various side effects. Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c index bd33be2..7919089 100644 --- a/arch/x86_64/kernel/setup64.c +++ b/arch/x86_64/kernel/setup64.c @@ -87,6 +87,10 @@ void __init setup_per_cpu_areas(void) int i; unsigned long size; +#ifdef CONFIG_HOTPLUG_CPU + prefill_possible_map(); +#endif + /* Copy section for each CPU (we discard the original) */ size = ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES); #ifdef CONFIG_MODULES diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c index e12d7ba..658a81b 100644 --- a/arch/x86_64/kernel/smpboot.c +++ b/arch/x86_64/kernel/smpboot.c @@ -892,7 +892,7 @@ static __init void disable_smp(void) * those NR_CPUS, hence cpu_possible_map represents entire NR_CPUS range. * - Ashok Raj */ -static void prefill_possible_map(void) +__init void prefill_possible_map(void) { int i; for (i = 0; i < NR_CPUS; i++) @@ -967,10 +967,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus) current_cpu_data = boot_cpu_data; current_thread_info()->cpu = 0; /* needed? */ -#ifdef CONFIG_HOTPLUG_CPU - prefill_possible_map(); -#endif - if (smp_sanity_check(max_cpus) < 0) { printk(KERN_INFO "SMP disabled\n"); disable_smp(); diff --git a/include/asm-x86_64/smp.h b/include/asm-x86_64/smp.h index 24e3261..c57ce40 100644 --- a/include/asm-x86_64/smp.h +++ b/include/asm-x86_64/smp.h @@ -81,6 +81,7 @@ static inline int hard_smp_processor_id(void) extern int safe_smp_processor_id(void); extern int __cpu_disable(void); extern void __cpu_die(unsigned int cpu); +extern void prefill_possible_map(void); #endif /* !ASSEMBLY */ -- cgit v0.10.2 From 3c92c2ba33cd7d666c5f83cc32aa590e794e91b0 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 11 Oct 2005 01:28:33 +0200 Subject: [PATCH] i386: Don't discard upper 32bits of HWCR on K8 Need to use long long, not long when RMWing a MSR. I think it's harmless right now, but still should be better fixed if AMD adds any bits in the upper 32bit of HWCR. Bug was introduced with the TLB flush filter fix for i386 Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds diff --git a/arch/i386/kernel/cpu/amd.c b/arch/i386/kernel/cpu/amd.c index 4c1ddf2..53a1681 100644 --- a/arch/i386/kernel/cpu/amd.c +++ b/arch/i386/kernel/cpu/amd.c @@ -29,7 +29,7 @@ static void __init init_amd(struct cpuinfo_x86 *c) int r; #ifdef CONFIG_SMP - unsigned long value; + unsigned long long value; /* Disable TLB flush filter by setting HWCR.FFDIS on K8 * bit 6 of msr C001_0015 -- cgit v0.10.2 From 907a42617970a159361f17ef9a63f04d276995ab Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 10 Oct 2005 18:19:19 -0700 Subject: Linux v2.6.14-rc4 diff --git a/Makefile b/Makefile index fdb96bc..504ba3c 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 14 -EXTRAVERSION =-rc3 +EXTRAVERSION =-rc4 NAME=Affluent Albatross # *DOCUMENTATION* -- cgit v0.10.2 From b8df110fea555d5088bba67f446c2435104405be Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 10 Oct 2005 20:43:22 -0700 Subject: [SPARC64]: Fix oops on runlevel change with serial console. Incorrect uart_write_wakeup() calls cause reference to a NULL tty pointer in sunsab and sunzilog serial drivers. Signed-off-by: David S. Miller diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index e971156..ba9381fd 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -274,7 +274,6 @@ static void transmit_chars(struct uart_sunsab_port *up, if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { up->interrupt_mask1 |= SAB82532_IMR1_XPR; writeb(up->interrupt_mask1, &up->regs->w.imr1); - uart_write_wakeup(&up->port); return; } diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c index d754457..7653d6c 100644 --- a/drivers/serial/sunzilog.c +++ b/drivers/serial/sunzilog.c @@ -517,10 +517,9 @@ static void sunzilog_transmit_chars(struct uart_sunzilog_port *up, if (up->port.info == NULL) goto ack_tx_int; xmit = &up->port.info->xmit; - if (uart_circ_empty(xmit)) { - uart_write_wakeup(&up->port); + if (uart_circ_empty(xmit)) goto ack_tx_int; - } + if (uart_tx_stopped(&up->port)) goto ack_tx_int; -- cgit v0.10.2 From 85d9b05d9b1edad9a2630584754720a957ab0a2a Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Mon, 10 Oct 2005 20:47:42 -0700 Subject: [NETFILTER] PPTP helper: Add missing Kconfig dependency PPTP should not be selectable without conntrack enabled Signed-off-by: Harald Welte Signed-off-by: David S. Miller diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig index a765972..4b6f807 100644 --- a/net/ipv4/netfilter/Kconfig +++ b/net/ipv4/netfilter/Kconfig @@ -139,6 +139,7 @@ config IP_NF_AMANDA config IP_NF_PPTP tristate 'PPTP protocol support' + depends on IP_NF_CONNTRACK help This module adds support for PPTP (Point to Point Tunnelling Protocol, RFC2637) connection tracking and NAT. -- cgit v0.10.2 From f40863cec87464f3f4ec3a6c00e3fda3bbb0c91b Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Mon, 10 Oct 2005 20:51:53 -0700 Subject: [NETFILTER] ipt_ULOG: Mark ipt_ULOG as OBSOLETE Similar to nfnetlink_queue and ip_queue, we mark ipt_ULOG as obsolete. This should have been part of the original nfnetlink_log merge, but I somehow missed it. Signed-off-by: Harald Welte Signed-off-by: David S. Miller diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig index 4b6f807..7d917e4 100644 --- a/net/ipv4/netfilter/Kconfig +++ b/net/ipv4/netfilter/Kconfig @@ -499,9 +499,14 @@ config IP_NF_TARGET_LOG To compile it as a module, choose M here. If unsure, say N. config IP_NF_TARGET_ULOG - tristate "ULOG target support" + tristate "ULOG target support (OBSOLETE)" depends on IP_NF_IPTABLES ---help--- + + This option enables the old IPv4-only "ipt_ULOG" implementation + which has been obsoleted by the new "nfnetlink_log" code (see + CONFIG_NETFILTER_NETLINK_LOG). + This option adds a `ULOG' target, which allows you to create rules in any iptables table. The packet is passed to a userspace logging daemon using netlink multicast sockets; unlike the LOG target -- cgit v0.10.2 From ebe0bbf06c9e03613bdcb6b5a704595a9344b7ff Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Mon, 10 Oct 2005 20:52:19 -0700 Subject: [NETFILTER] nfnetlink: use highest bit of nfa_type to indicate nested TLV As Henrik Nordstrom pointed out, all our efforts with "split endian" (i.e. host byte order tags, net byte order values) are useless, unless a parser can determine whether an attribute is nested or not. This patch steals the highest bit of nfattr.nfa_type to indicate whether the data payload contains a nested nfattr (1) or not (0). This will break userspace compatibility, but luckily no kernel with nfnetlink was released so far. Signed-off-by: Harald Welte Signed-off-by: David S. Miller diff --git a/include/linux/netfilter/nfnetlink.h b/include/linux/netfilter/nfnetlink.h index 1d5b10a..f08e870 100644 --- a/include/linux/netfilter/nfnetlink.h +++ b/include/linux/netfilter/nfnetlink.h @@ -41,11 +41,15 @@ enum nfnetlink_groups { struct nfattr { u_int16_t nfa_len; - u_int16_t nfa_type; + u_int16_t nfa_type; /* we use 15 bits for the type, and the highest + * bit to indicate whether the payload is nested */ } __attribute__ ((packed)); -/* FIXME: Shamelessly copy and pasted from rtnetlink.h, it's time - * to put this in a generic file */ +/* FIXME: Apart from NFNL_NFA_NESTED shamelessly copy and pasted from + * rtnetlink.h, it's time to put this in a generic file */ + +#define NFNL_NFA_NEST 0x8000 +#define NFA_TYPE(attr) ((attr)->nfa_type & 0x7fff) #define NFA_ALIGNTO 4 #define NFA_ALIGN(len) (((len) + NFA_ALIGNTO - 1) & ~(NFA_ALIGNTO - 1)) @@ -59,7 +63,7 @@ struct nfattr #define NFA_PAYLOAD(nfa) ((int)((nfa)->nfa_len) - NFA_LENGTH(0)) #define NFA_NEST(skb, type) \ ({ struct nfattr *__start = (struct nfattr *) (skb)->tail; \ - NFA_PUT(skb, type, 0, NULL); \ + NFA_PUT(skb, (NFNL_NFA_NEST | type), 0, NULL); \ __start; }) #define NFA_NEST_END(skb, start) \ ({ (start)->nfa_len = ((skb)->tail - (unsigned char *) (start)); \ diff --git a/net/netfilter/nfnetlink.c b/net/netfilter/nfnetlink.c index 1caaca0..4bc27a6 100644 --- a/net/netfilter/nfnetlink.c +++ b/net/netfilter/nfnetlink.c @@ -133,7 +133,7 @@ int nfattr_parse(struct nfattr *tb[], int maxattr, struct nfattr *nfa, int len) memset(tb, 0, sizeof(struct nfattr *) * maxattr); while (NFA_OK(nfa, len)) { - unsigned flavor = nfa->nfa_type; + unsigned flavor = NFA_TYPE(nfa); if (flavor && flavor <= maxattr) tb[flavor-1] = nfa; nfa = NFA_NEXT(nfa, len); @@ -177,7 +177,7 @@ nfnetlink_check_attributes(struct nfnetlink_subsystem *subsys, int attrlen = nlh->nlmsg_len - NLMSG_ALIGN(min_len); while (NFA_OK(attr, attrlen)) { - unsigned flavor = attr->nfa_type; + unsigned flavor = NFA_TYPE(attr); if (flavor) { if (flavor > attr_count) return -EINVAL; -- cgit v0.10.2 From b3a91d037a2575040f9b6a483f60c407a3d80368 Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Mon, 10 Oct 2005 20:52:36 -0700 Subject: [NETFILTER] nat: remove bogus structure member When 'rustynat' was merged in 2.6.12, the use of the "helper" pointer of struct ipt_nat_info was obsoleted, but the pointer not removed from the struct. This patch removes the pointer, thereby yet again shrinking struct ip_conntrack. Discovered-by: Rusty Russell Signed-off-by: Harald Welte Signed-off-by: David S. Miller diff --git a/include/linux/netfilter_ipv4/ip_nat.h b/include/linux/netfilter_ipv4/ip_nat.h index e201ec6..41a107d 100644 --- a/include/linux/netfilter_ipv4/ip_nat.h +++ b/include/linux/netfilter_ipv4/ip_nat.h @@ -58,10 +58,6 @@ extern rwlock_t ip_nat_lock; struct ip_nat_info { struct list_head bysource; - - /* Helper (NULL if none). */ - struct ip_nat_helper *helper; - struct ip_nat_seq seq[IP_CT_DIR_MAX]; }; -- cgit v0.10.2 From d000eaf7720cb12cd03cd3d55f71be44357d27a9 Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Mon, 10 Oct 2005 20:52:51 -0700 Subject: [NETFILTER] conntrack_netlink: Fix endian issue with status from userspace When we send "status" from userspace, we forget to convert the endianness. This patch adds the reqired conversion. Thanks to Pablo Neira for discovering this. Signed-off-by: Harald Welte Signed-off-by: David S. Miller diff --git a/net/ipv4/netfilter/ip_conntrack_netlink.c b/net/ipv4/netfilter/ip_conntrack_netlink.c index b08a432..eade274 100644 --- a/net/ipv4/netfilter/ip_conntrack_netlink.c +++ b/net/ipv4/netfilter/ip_conntrack_netlink.c @@ -833,7 +833,8 @@ out: static inline int ctnetlink_change_status(struct ip_conntrack *ct, struct nfattr *cda[]) { - unsigned long d, status = *(u_int32_t *)NFA_DATA(cda[CTA_STATUS-1]); + unsigned long d; + unsigned status = ntohl(*(u_int32_t *)NFA_DATA(cda[CTA_STATUS-1])); d = ct->status ^ status; if (d & (IPS_EXPECTED|IPS_CONFIRMED|IPS_DYING)) -- cgit v0.10.2 From a1bcc3f26885b0a8bf04799551de2e9574ccbda1 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Mon, 10 Oct 2005 20:53:16 -0700 Subject: [NETFILTER] ctnetlink: ICMP ID is not mandatory The ID is only required by ICMP type 8 (echo), so it's not mandatory for all sort of ICMP connections. This patch makes mandatory only the type and the code for ICMP netlink messages. Signed-off-by: Pablo Neira Ayuso Signed-off-by: Harald Welte Signed-off-by: David S. Miller diff --git a/net/ipv4/netfilter/ip_conntrack_proto_icmp.c b/net/ipv4/netfilter/ip_conntrack_proto_icmp.c index 838d1d6..98f0015 100644 --- a/net/ipv4/netfilter/ip_conntrack_proto_icmp.c +++ b/net/ipv4/netfilter/ip_conntrack_proto_icmp.c @@ -296,8 +296,7 @@ static int icmp_nfattr_to_tuple(struct nfattr *tb[], struct ip_conntrack_tuple *tuple) { if (!tb[CTA_PROTO_ICMP_TYPE-1] - || !tb[CTA_PROTO_ICMP_CODE-1] - || !tb[CTA_PROTO_ICMP_ID-1]) + || !tb[CTA_PROTO_ICMP_CODE-1]) return -1; tuple->dst.u.icmp.type = -- cgit v0.10.2 From 5bbc243aafff9ad653dc7a9fa7bcaf0b4631355a Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Mon, 10 Oct 2005 20:54:01 -0700 Subject: [NETFILTER]: Add missing include to ip_conntrack_tuple.h Without this #include, __be16 is not defined and userspace programs will break. Signed-off-by: Harald Welte Signed-off-by: David S. Miller diff --git a/include/linux/netfilter_ipv4/ip_conntrack_tuple.h b/include/linux/netfilter_ipv4/ip_conntrack_tuple.h index 20e43f0..3232db1 100644 --- a/include/linux/netfilter_ipv4/ip_conntrack_tuple.h +++ b/include/linux/netfilter_ipv4/ip_conntrack_tuple.h @@ -1,6 +1,8 @@ #ifndef _IP_CONNTRACK_TUPLE_H #define _IP_CONNTRACK_TUPLE_H +#include + /* A `tuple' is a structure containing the information to uniquely identify a connection. ie. if two packets have the same tuple, they are in the same connection; if not, they are not. -- cgit v0.10.2 From e1c73b78e3706bd3c336d4730a01dd4081dfb7ee Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Mon, 10 Oct 2005 20:55:49 -0700 Subject: [NETFILTER] ctnetlink: add one nesting level for TCP state To keep consistency, the TCP private protocol information is nested attributes under CTA_PROTOINFO_TCP. This way the sequence of attributes to access the TCP state information looks like here below: CTA_PROTOINFO CTA_PROTOINFO_TCP CTA_PROTOINFO_TCP_STATE instead of: CTA_PROTOINFO CTA_PROTOINFO_TCP_STATE Signed-off-by: Pablo Neira Ayuso Signed-off-by: Harald Welte Signed-off-by: David S. Miller diff --git a/include/linux/netfilter/nfnetlink_conntrack.h b/include/linux/netfilter/nfnetlink_conntrack.h index 5c55751..fb55110 100644 --- a/include/linux/netfilter/nfnetlink_conntrack.h +++ b/include/linux/netfilter/nfnetlink_conntrack.h @@ -70,11 +70,18 @@ enum ctattr_l4proto { enum ctattr_protoinfo { CTA_PROTOINFO_UNSPEC, - CTA_PROTOINFO_TCP_STATE, + CTA_PROTOINFO_TCP, __CTA_PROTOINFO_MAX }; #define CTA_PROTOINFO_MAX (__CTA_PROTOINFO_MAX - 1) +enum ctattr_protoinfo_tcp { + CTA_PROTOINFO_TCP_UNSPEC, + CTA_PROTOINFO_TCP_STATE, + __CTA_PROTOINFO_TCP_MAX +}; +#define CTA_PROTOINFO_TCP_MAX (__CTA_PROTOINFO_TCP_MAX - 1) + enum ctattr_counters { CTA_COUNTERS_UNSPEC, CTA_COUNTERS_PACKETS, diff --git a/net/ipv4/netfilter/ip_conntrack_proto_tcp.c b/net/ipv4/netfilter/ip_conntrack_proto_tcp.c index 121760d..75e27e6 100644 --- a/net/ipv4/netfilter/ip_conntrack_proto_tcp.c +++ b/net/ipv4/netfilter/ip_conntrack_proto_tcp.c @@ -341,11 +341,15 @@ static int tcp_print_conntrack(struct seq_file *s, static int tcp_to_nfattr(struct sk_buff *skb, struct nfattr *nfa, const struct ip_conntrack *ct) { + struct nfattr *nest_parms = NFA_NEST(skb, CTA_PROTOINFO_TCP); + read_lock_bh(&tcp_lock); NFA_PUT(skb, CTA_PROTOINFO_TCP_STATE, sizeof(u_int8_t), &ct->proto.tcp.state); read_unlock_bh(&tcp_lock); + NFA_NEST_END(skb, nest_parms); + return 0; nfattr_failure: -- cgit v0.10.2 From 08eb8f124f990aa476589d1f7810f7ec7f259c08 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 10 Oct 2005 21:02:26 -0700 Subject: [SPARC32]: Revert IOMAP change eb98129eec7fa605f0407dfd92d40ee8ddf5cd9a Breakage noted by Al Viro. It breaks non-PCI builds, it's probably better to have a more direct implementation on sparc32, and which driver actually needs this is still questionable. We can resolve this in 2.6.15 Signed-off-by: David S. Miller diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index f7c51b8..6537445 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -21,10 +21,6 @@ config GENERIC_ISA_DMA bool default y -config GENERIC_IOMAP - bool - default y - source "init/Kconfig" menu "General machine setup" diff --git a/arch/sparc/defconfig b/arch/sparc/defconfig index 8a3aef1e..a698562 100644 --- a/arch/sparc/defconfig +++ b/arch/sparc/defconfig @@ -5,7 +5,6 @@ CONFIG_MMU=y CONFIG_UID16=y CONFIG_HIGHMEM=y CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_IOMAP=y # # Code maturity level options -- cgit v0.10.2 From a02a64223eddb410712b015fb3342c9a316ab70b Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 10 Oct 2005 21:11:08 -0700 Subject: [IPSEC]: Use ALIGN macro in ESP This patch uses the macro ALIGN in all the applicable spots for ESP. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c index 1b5a09d..e911c6d 100644 --- a/net/ipv4/esp4.c +++ b/net/ipv4/esp4.c @@ -5,6 +5,7 @@ #include #include #include +#include #include #include #include @@ -42,10 +43,10 @@ static int esp_output(struct xfrm_state *x, struct sk_buff *skb) esp = x->data; alen = esp->auth.icv_trunc_len; tfm = esp->conf.tfm; - blksize = (crypto_tfm_alg_blocksize(tfm) + 3) & ~3; - clen = (clen + 2 + blksize-1)&~(blksize-1); + blksize = ALIGN(crypto_tfm_alg_blocksize(tfm), 4); + clen = ALIGN(clen + 2, blksize); if (esp->conf.padlen) - clen = (clen + esp->conf.padlen-1)&~(esp->conf.padlen-1); + clen = ALIGN(clen, esp->conf.padlen); if ((nfrags = skb_cow_data(skb, clen-skb->len+alen, &trailer)) < 0) goto error; @@ -307,13 +308,13 @@ static u32 esp4_get_max_size(struct xfrm_state *x, int mtu) u32 blksize = crypto_tfm_alg_blocksize(esp->conf.tfm); if (x->props.mode) { - mtu = (mtu + 2 + blksize-1)&~(blksize-1); + mtu = ALIGN(mtu + 2, blksize); } else { /* The worst case. */ mtu += 2 + blksize; } if (esp->conf.padlen) - mtu = (mtu + esp->conf.padlen-1)&~(esp->conf.padlen-1); + mtu = ALIGN(mtu, esp->conf.padlen); return mtu + x->props.header_len + esp->auth.icv_trunc_len; } diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c index 9b27460..0c7d7b4 100644 --- a/net/ipv6/esp6.c +++ b/net/ipv6/esp6.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include @@ -66,10 +67,10 @@ static int esp6_output(struct xfrm_state *x, struct sk_buff *skb) alen = esp->auth.icv_trunc_len; tfm = esp->conf.tfm; - blksize = (crypto_tfm_alg_blocksize(tfm) + 3) & ~3; - clen = (clen + 2 + blksize-1)&~(blksize-1); + blksize = ALIGN(crypto_tfm_alg_blocksize(tfm), 4); + clen = ALIGN(clen + 2, blksize); if (esp->conf.padlen) - clen = (clen + esp->conf.padlen-1)&~(esp->conf.padlen-1); + clen = ALIGN(clen, esp->conf.padlen); if ((nfrags = skb_cow_data(skb, clen-skb->len+alen, &trailer)) < 0) { goto error; @@ -238,13 +239,13 @@ static u32 esp6_get_max_size(struct xfrm_state *x, int mtu) u32 blksize = crypto_tfm_alg_blocksize(esp->conf.tfm); if (x->props.mode) { - mtu = (mtu + 2 + blksize-1)&~(blksize-1); + mtu = ALIGN(mtu + 2, blksize); } else { /* The worst case. */ mtu += 2 + blksize; } if (esp->conf.padlen) - mtu = (mtu + esp->conf.padlen-1)&~(esp->conf.padlen-1); + mtu = ALIGN(mtu, esp->conf.padlen); return mtu + x->props.header_len + esp->auth.icv_full_len; } -- cgit v0.10.2 From d4875b049b2e6401a6e1fae90b7f09e20a636fcf Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 10 Oct 2005 21:11:34 -0700 Subject: [IPSEC] Fix block size/MTU bugs in ESP This patch fixes the following bugs in ESP: * Fix transport mode MTU overestimate. This means that the inner MTU is smaller than it needs be. Worse yet, given an input MTU which is a multiple of 4 it will always produce an estimate which is not a multiple of 4. For example, given a standard ESP/3DES/MD5 transform and an MTU of 1500, the resulting MTU for transport mode is 1462 when it should be 1464. The reason for this is because IP header lengths are always a multiple of 4 for IPv4 and 8 for IPv6. * Ensure that the block size is at least 4. This is required by RFC2406 and corresponds to what the esp_output function does. At the moment this only affects crypto_null as its block size is 1. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c index e911c6d..1b18ce6 100644 --- a/net/ipv4/esp4.c +++ b/net/ipv4/esp4.c @@ -144,7 +144,7 @@ static int esp_input(struct xfrm_state *x, struct xfrm_decap_state *decap, struc struct ip_esp_hdr *esph; struct esp_data *esp = x->data; struct sk_buff *trailer; - int blksize = crypto_tfm_alg_blocksize(esp->conf.tfm); + int blksize = ALIGN(crypto_tfm_alg_blocksize(esp->conf.tfm), 4); int alen = esp->auth.icv_trunc_len; int elen = skb->len - sizeof(struct ip_esp_hdr) - esp->conf.ivlen - alen; int nfrags; @@ -305,13 +305,13 @@ static int esp_post_input(struct xfrm_state *x, struct xfrm_decap_state *decap, static u32 esp4_get_max_size(struct xfrm_state *x, int mtu) { struct esp_data *esp = x->data; - u32 blksize = crypto_tfm_alg_blocksize(esp->conf.tfm); + u32 blksize = ALIGN(crypto_tfm_alg_blocksize(esp->conf.tfm), 4); if (x->props.mode) { mtu = ALIGN(mtu + 2, blksize); } else { /* The worst case. */ - mtu += 2 + blksize; + mtu = ALIGN(mtu + 2, 4) + blksize - 4; } if (esp->conf.padlen) mtu = ALIGN(mtu, esp->conf.padlen); diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c index 0c7d7b4..40d9a19 100644 --- a/net/ipv6/esp6.c +++ b/net/ipv6/esp6.c @@ -134,7 +134,7 @@ static int esp6_input(struct xfrm_state *x, struct xfrm_decap_state *decap, stru struct ipv6_esp_hdr *esph; struct esp_data *esp = x->data; struct sk_buff *trailer; - int blksize = crypto_tfm_alg_blocksize(esp->conf.tfm); + int blksize = ALIGN(crypto_tfm_alg_blocksize(esp->conf.tfm), 4); int alen = esp->auth.icv_trunc_len; int elen = skb->len - sizeof(struct ipv6_esp_hdr) - esp->conf.ivlen - alen; @@ -236,13 +236,14 @@ out_nofree: static u32 esp6_get_max_size(struct xfrm_state *x, int mtu) { struct esp_data *esp = x->data; - u32 blksize = crypto_tfm_alg_blocksize(esp->conf.tfm); + u32 blksize = ALIGN(crypto_tfm_alg_blocksize(esp->conf.tfm), 4); if (x->props.mode) { mtu = ALIGN(mtu + 2, blksize); } else { /* The worst case. */ - mtu += 2 + blksize; + u32 padsize = ((blksize - 1) & 7) + 1; + mtu = ALIGN(mtu + 2, padsize) + blksize - padsize; } if (esp->conf.padlen) mtu = ALIGN(mtu, esp->conf.padlen); -- cgit v0.10.2 From a051a8f7306476af0a74370ad56e793cb6c43bf7 Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Mon, 10 Oct 2005 21:21:10 -0700 Subject: [NETFILTER]: Use only 32bit counters for CONNTRACK_ACCT Initially we used 64bit counters for conntrack-based accounting, since we had no event mechanism to tell userspace that our counters are about to overflow. With nfnetlink_conntrack, we now have such a event mechanism and thus can save 16bytes per connection. Signed-off-by: Harald Welte Signed-off-by: David S. Miller diff --git a/include/linux/netfilter/nfnetlink_conntrack.h b/include/linux/netfilter/nfnetlink_conntrack.h index fb55110..116fcac 100644 --- a/include/linux/netfilter/nfnetlink_conntrack.h +++ b/include/linux/netfilter/nfnetlink_conntrack.h @@ -84,8 +84,10 @@ enum ctattr_protoinfo_tcp { enum ctattr_counters { CTA_COUNTERS_UNSPEC, - CTA_COUNTERS_PACKETS, - CTA_COUNTERS_BYTES, + CTA_COUNTERS_PACKETS, /* old 64bit counters */ + CTA_COUNTERS_BYTES, /* old 64bit counters */ + CTA_COUNTERS32_PACKETS, + CTA_COUNTERS32_BYTES, __CTA_COUNTERS_MAX }; #define CTA_COUNTERS_MAX (__CTA_COUNTERS_MAX - 1) diff --git a/include/linux/netfilter_ipv4/ip_conntrack.h b/include/linux/netfilter_ipv4/ip_conntrack.h index 4ced387..d078bb9 100644 --- a/include/linux/netfilter_ipv4/ip_conntrack.h +++ b/include/linux/netfilter_ipv4/ip_conntrack.h @@ -117,6 +117,10 @@ enum ip_conntrack_events /* NAT info */ IPCT_NATINFO_BIT = 10, IPCT_NATINFO = (1 << IPCT_NATINFO_BIT), + + /* Counter highest bit has been set */ + IPCT_COUNTER_FILLING_BIT = 11, + IPCT_COUNTER_FILLING = (1 << IPCT_COUNTER_FILLING_BIT), }; enum ip_conntrack_expect_events { @@ -192,8 +196,8 @@ do { \ struct ip_conntrack_counter { - u_int64_t packets; - u_int64_t bytes; + u_int32_t packets; + u_int32_t bytes; }; struct ip_conntrack_helper; diff --git a/net/ipv4/netfilter/ip_conntrack_core.c b/net/ipv4/netfilter/ip_conntrack_core.c index ea65dd3..07a80b5 100644 --- a/net/ipv4/netfilter/ip_conntrack_core.c +++ b/net/ipv4/netfilter/ip_conntrack_core.c @@ -1119,7 +1119,7 @@ void __ip_ct_refresh_acct(struct ip_conntrack *ct, unsigned long extra_jiffies, int do_acct) { - int do_event = 0; + int event = 0; IP_NF_ASSERT(ct->timeout.data == (unsigned long)ct); IP_NF_ASSERT(skb); @@ -1129,13 +1129,13 @@ void __ip_ct_refresh_acct(struct ip_conntrack *ct, /* If not in hash table, timer will not be active yet */ if (!is_confirmed(ct)) { ct->timeout.expires = extra_jiffies; - do_event = 1; + event = IPCT_REFRESH; } else { /* Need del_timer for race avoidance (may already be dying). */ if (del_timer(&ct->timeout)) { ct->timeout.expires = jiffies + extra_jiffies; add_timer(&ct->timeout); - do_event = 1; + event = IPCT_REFRESH; } } @@ -1144,14 +1144,17 @@ void __ip_ct_refresh_acct(struct ip_conntrack *ct, ct->counters[CTINFO2DIR(ctinfo)].packets++; ct->counters[CTINFO2DIR(ctinfo)].bytes += ntohs(skb->nh.iph->tot_len); + if ((ct->counters[CTINFO2DIR(ctinfo)].packets & 0x80000000) + || (ct->counters[CTINFO2DIR(ctinfo)].bytes & 0x80000000)) + event |= IPCT_COUNTER_FILLING; } #endif write_unlock_bh(&ip_conntrack_lock); /* must be unlocked when calling event cache */ - if (do_event) - ip_conntrack_event_cache(IPCT_REFRESH, skb); + if (event) + ip_conntrack_event_cache(event, skb); } #if defined(CONFIG_IP_NF_CONNTRACK_NETLINK) || \ diff --git a/net/ipv4/netfilter/ip_conntrack_netlink.c b/net/ipv4/netfilter/ip_conntrack_netlink.c index eade274..06ed91e 100644 --- a/net/ipv4/netfilter/ip_conntrack_netlink.c +++ b/net/ipv4/netfilter/ip_conntrack_netlink.c @@ -177,11 +177,11 @@ ctnetlink_dump_counters(struct sk_buff *skb, const struct ip_conntrack *ct, struct nfattr *nest_count = NFA_NEST(skb, type); u_int64_t tmp; - tmp = cpu_to_be64(ct->counters[dir].packets); - NFA_PUT(skb, CTA_COUNTERS_PACKETS, sizeof(u_int64_t), &tmp); + tmp = htonl(ct->counters[dir].packets); + NFA_PUT(skb, CTA_COUNTERS32_PACKETS, sizeof(u_int32_t), &tmp); - tmp = cpu_to_be64(ct->counters[dir].bytes); - NFA_PUT(skb, CTA_COUNTERS_BYTES, sizeof(u_int64_t), &tmp); + tmp = htonl(ct->counters[dir].bytes); + NFA_PUT(skb, CTA_COUNTERS32_BYTES, sizeof(u_int32_t), &tmp); NFA_NEST_END(skb, nest_count); -- cgit v0.10.2 From 339231537506846cb232a2f0cc4a2c662b2d5b07 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Mon, 10 Oct 2005 21:23:28 -0700 Subject: [NETFILTER] ctnetlink: allow userspace to change TCP state This patch adds the ability of changing the state a TCP connection. I know that this must be used with care but it's required to provide a complete conntrack creation via conntrack_netlink. So I'll document this aspect on the upcoming docs. Signed-off-by: Pablo Neira Ayuso Signed-off-by: Harald Welte Signed-off-by: David S. Miller diff --git a/include/linux/netfilter_ipv4/ip_conntrack_protocol.h b/include/linux/netfilter_ipv4/ip_conntrack_protocol.h index b6b99be..2c76b87 100644 --- a/include/linux/netfilter_ipv4/ip_conntrack_protocol.h +++ b/include/linux/netfilter_ipv4/ip_conntrack_protocol.h @@ -52,6 +52,9 @@ struct ip_conntrack_protocol int (*to_nfattr)(struct sk_buff *skb, struct nfattr *nfa, const struct ip_conntrack *ct); + /* convert nfnetlink attributes to protoinfo */ + int (*from_nfattr)(struct nfattr *tb[], struct ip_conntrack *ct); + int (*tuple_to_nfattr)(struct sk_buff *skb, const struct ip_conntrack_tuple *t); int (*nfattr_to_tuple)(struct nfattr *tb[], diff --git a/net/ipv4/netfilter/ip_conntrack_proto_tcp.c b/net/ipv4/netfilter/ip_conntrack_proto_tcp.c index 75e27e6..d6701ca 100644 --- a/net/ipv4/netfilter/ip_conntrack_proto_tcp.c +++ b/net/ipv4/netfilter/ip_conntrack_proto_tcp.c @@ -356,6 +356,28 @@ nfattr_failure: read_unlock_bh(&tcp_lock); return -1; } + +static int nfattr_to_tcp(struct nfattr *cda[], struct ip_conntrack *ct) +{ + struct nfattr *attr = cda[CTA_PROTOINFO_TCP-1]; + struct nfattr *tb[CTA_PROTOINFO_TCP_MAX]; + + if (nfattr_parse_nested(tb, CTA_PROTOINFO_TCP_MAX, attr) < 0) + goto nfattr_failure; + + if (!tb[CTA_PROTOINFO_TCP_STATE-1]) + return -EINVAL; + + write_lock_bh(&tcp_lock); + ct->proto.tcp.state = + *(u_int8_t *)NFA_DATA(tb[CTA_PROTOINFO_TCP_STATE-1]); + write_unlock_bh(&tcp_lock); + + return 0; + +nfattr_failure: + return -1; +} #endif static unsigned int get_conntrack_index(const struct tcphdr *tcph) @@ -1127,6 +1149,7 @@ struct ip_conntrack_protocol ip_conntrack_protocol_tcp = #if defined(CONFIG_IP_NF_CONNTRACK_NETLINK) || \ defined(CONFIG_IP_NF_CONNTRACK_NETLINK_MODULE) .to_nfattr = tcp_to_nfattr, + .from_nfattr = nfattr_to_tcp, .tuple_to_nfattr = ip_ct_port_tuple_to_nfattr, .nfattr_to_tuple = ip_ct_port_nfattr_to_tuple, #endif -- cgit v0.10.2 From 061cb4a0ec34a6e3069d5a1b3c547e55a71498c5 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Mon, 10 Oct 2005 21:23:46 -0700 Subject: [NETFILTER] ctnetlink: add support to change protocol info This patch add support to change the state of the private protocol information via conntrack_netlink. Signed-off-by: Pablo Neira Ayuso Signed-off-by: Harald Welte Signed-off-by: David S. Miller diff --git a/net/ipv4/netfilter/ip_conntrack_netlink.c b/net/ipv4/netfilter/ip_conntrack_netlink.c index 06ed91e..166e606 100644 --- a/net/ipv4/netfilter/ip_conntrack_netlink.c +++ b/net/ipv4/netfilter/ip_conntrack_netlink.c @@ -949,6 +949,31 @@ ctnetlink_change_timeout(struct ip_conntrack *ct, struct nfattr *cda[]) return 0; } +static inline int +ctnetlink_change_protoinfo(struct ip_conntrack *ct, struct nfattr *cda[]) +{ + struct nfattr *tb[CTA_PROTOINFO_MAX], *attr = cda[CTA_PROTOINFO-1]; + struct ip_conntrack_protocol *proto; + u_int16_t npt = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.protonum; + int err = 0; + + if (nfattr_parse_nested(tb, CTA_PROTOINFO_MAX, attr) < 0) + goto nfattr_failure; + + proto = ip_conntrack_proto_find_get(npt); + if (!proto) + return -EINVAL; + + if (proto->from_nfattr) + err = proto->from_nfattr(tb, ct); + ip_conntrack_proto_put(proto); + + return err; + +nfattr_failure: + return -ENOMEM; +} + static int ctnetlink_change_conntrack(struct ip_conntrack *ct, struct nfattr *cda[]) { @@ -974,6 +999,12 @@ ctnetlink_change_conntrack(struct ip_conntrack *ct, struct nfattr *cda[]) return err; } + if (cda[CTA_PROTOINFO-1]) { + err = ctnetlink_change_protoinfo(ct, cda); + if (err < 0) + return err; + } + DEBUGP("all done\n"); return 0; } @@ -1003,6 +1034,12 @@ ctnetlink_create_conntrack(struct nfattr *cda[], if (err < 0) goto err; + if (cda[CTA_PROTOINFO-1]) { + err = ctnetlink_change_protoinfo(ct, cda); + if (err < 0) + return err; + } + ct->helper = ip_conntrack_helper_find_get(rtuple); add_timer(&ct->timeout); -- cgit v0.10.2 From 777b25a2fea7129222eb11fba55c0a67982383ff Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Mon, 10 Oct 2005 21:24:20 -0700 Subject: [CCID]: Check if ccid is NULL in the hc_[tr]x_exit functions For consistency with ccid_exit and to fix a bug when IP_DCCP_UNLOAD_HACK is enabled as the control sock is not associated to any CCID. Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: David S. Miller diff --git a/net/dccp/ccid.h b/net/dccp/ccid.h index 21e5514..c37eeea 100644 --- a/net/dccp/ccid.h +++ b/net/dccp/ccid.h @@ -110,14 +110,14 @@ static inline int ccid_hc_tx_init(struct ccid *ccid, struct sock *sk) static inline void ccid_hc_rx_exit(struct ccid *ccid, struct sock *sk) { - if (ccid->ccid_hc_rx_exit != NULL && + if (ccid != NULL && ccid->ccid_hc_rx_exit != NULL && dccp_sk(sk)->dccps_hc_rx_ccid_private != NULL) ccid->ccid_hc_rx_exit(sk); } static inline void ccid_hc_tx_exit(struct ccid *ccid, struct sock *sk) { - if (ccid->ccid_hc_tx_exit != NULL && + if (ccid != NULL && ccid->ccid_hc_tx_exit != NULL && dccp_sk(sk)->dccps_hc_tx_ccid_private != NULL) ccid->ccid_hc_tx_exit(sk); } -- cgit v0.10.2 From 2a9bc9bb4d3a4570a8a48aadf071b91e657adb89 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Mon, 10 Oct 2005 21:25:00 -0700 Subject: [DCCP]: Transition from PARTOPEN to OPEN when receiving DATA packets Noticed by Andrea Bittau, that provided a patch that was modified to not transition from RESPOND to OPEN when receiving DATA packets. Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: David S. Miller diff --git a/net/dccp/input.c b/net/dccp/input.c index 1b6b2cb..3454d59 100644 --- a/net/dccp/input.c +++ b/net/dccp/input.c @@ -375,6 +375,9 @@ static int dccp_rcv_respond_partopen_state_process(struct sock *sk, case DCCP_PKT_RESET: inet_csk_clear_xmit_timer(sk, ICSK_TIME_DACK); break; + case DCCP_PKT_DATA: + if (sk->sk_state == DCCP_RESPOND) + break; case DCCP_PKT_DATAACK: case DCCP_PKT_ACK: /* @@ -393,7 +396,8 @@ static int dccp_rcv_respond_partopen_state_process(struct sock *sk, dccp_sk(sk)->dccps_osr = DCCP_SKB_CB(skb)->dccpd_seq; dccp_set_state(sk, DCCP_OPEN); - if (dh->dccph_type == DCCP_PKT_DATAACK) { + if (dh->dccph_type == DCCP_PKT_DATAACK || + dh->dccph_type == DCCP_PKT_DATA) { dccp_rcv_established(sk, skb, dh, len); queued = 1; /* packet was queued (by dccp_rcv_established) */ -- cgit v0.10.2 From eeb2b8560676e454ad37ee30b49bc7d897edc9be Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Mon, 10 Oct 2005 21:25:23 -0700 Subject: [TWSK]: Grab the module refcount for timewait sockets This is required to avoid unloading a module that has active timewait sockets, such as DCCP. Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: David S. Miller diff --git a/include/net/inet_timewait_sock.h b/include/net/inet_timewait_sock.h index 4ade56e..28f7b21 100644 --- a/include/net/inet_timewait_sock.h +++ b/include/net/inet_timewait_sock.h @@ -19,6 +19,7 @@ #include #include +#include #include #include #include @@ -193,11 +194,13 @@ static inline u32 inet_rcv_saddr(const struct sock *sk) static inline void inet_twsk_put(struct inet_timewait_sock *tw) { if (atomic_dec_and_test(&tw->tw_refcnt)) { + struct module *owner = tw->tw_prot->owner; #ifdef SOCK_REFCNT_DEBUG printk(KERN_DEBUG "%s timewait_sock %p released\n", tw->tw_prot->name, tw); #endif kmem_cache_free(tw->tw_prot->twsk_slab, tw); + module_put(owner); } } diff --git a/net/ipv4/inet_timewait_sock.c b/net/ipv4/inet_timewait_sock.c index f9076ef..a010e9a 100644 --- a/net/ipv4/inet_timewait_sock.c +++ b/net/ipv4/inet_timewait_sock.c @@ -111,6 +111,7 @@ struct inet_timewait_sock *inet_twsk_alloc(const struct sock *sk, const int stat tw->tw_prot = sk->sk_prot_creator; atomic_set(&tw->tw_refcnt, 1); inet_twsk_dead_node_init(tw); + __module_get(tw->tw_prot->owner); } return tw; -- cgit v0.10.2 From 875521ddccfa90d519cf31dfc8aa472f7f6325bb Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 11 Oct 2005 01:38:35 -0400 Subject: e100: revert CPU cycle saver microcode, it causes severe problems for certain NICs Reverting 685fac63f5ca6c5ca06bab641e1a32bbf9287e89: > [PATCH] e100: CPU cycle saver microcode > > > Add cpu cycle saver microcode to 8086:{1209/1229} other than ICH devices. > > Signed-off-by: Mallikarjuna R Chilakala > Signed-off-by: Ganesh Venkatesan > Signed-off-by: John Ronciak > Signed-off-by: Jeff Garzik diff --git a/drivers/net/e100.c b/drivers/net/e100.c index fbf1c06..40887f0 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -903,8 +903,8 @@ static void mdio_write(struct net_device *netdev, int addr, int reg, int data) static void e100_get_defaults(struct nic *nic) { - struct param_range rfds = { .min = 16, .max = 256, .count = 256 }; - struct param_range cbs = { .min = 64, .max = 256, .count = 128 }; + struct param_range rfds = { .min = 16, .max = 256, .count = 64 }; + struct param_range cbs = { .min = 64, .max = 256, .count = 64 }; pci_read_config_byte(nic->pdev, PCI_REVISION_ID, &nic->rev_id); /* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */ @@ -1007,213 +1007,25 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb) c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]); } -/********************************************************/ -/* Micro code for 8086:1229 Rev 8 */ -/********************************************************/ - -/* Parameter values for the D101M B-step */ -#define D101M_CPUSAVER_TIMER_DWORD 78 -#define D101M_CPUSAVER_BUNDLE_DWORD 65 -#define D101M_CPUSAVER_MIN_SIZE_DWORD 126 - -#define D101M_B_RCVBUNDLE_UCODE \ -{\ -0x00550215, 0xFFFF0437, 0xFFFFFFFF, 0x06A70789, 0xFFFFFFFF, 0x0558FFFF, \ -0x000C0001, 0x00101312, 0x000C0008, 0x00380216, \ -0x0010009C, 0x00204056, 0x002380CC, 0x00380056, \ -0x0010009C, 0x00244C0B, 0x00000800, 0x00124818, \ -0x00380438, 0x00000000, 0x00140000, 0x00380555, \ -0x00308000, 0x00100662, 0x00100561, 0x000E0408, \ -0x00134861, 0x000C0002, 0x00103093, 0x00308000, \ -0x00100624, 0x00100561, 0x000E0408, 0x00100861, \ -0x000C007E, 0x00222C21, 0x000C0002, 0x00103093, \ -0x00380C7A, 0x00080000, 0x00103090, 0x00380C7A, \ -0x00000000, 0x00000000, 0x00000000, 0x00000000, \ -0x0010009C, 0x00244C2D, 0x00010004, 0x00041000, \ -0x003A0437, 0x00044010, 0x0038078A, 0x00000000, \ -0x00100099, 0x00206C7A, 0x0010009C, 0x00244C48, \ -0x00130824, 0x000C0001, 0x00101213, 0x00260C75, \ -0x00041000, 0x00010004, 0x00130826, 0x000C0006, \ -0x002206A8, 0x0013C926, 0x00101313, 0x003806A8, \ -0x00000000, 0x00000000, 0x00000000, 0x00000000, \ -0x00000000, 0x00000000, 0x00000000, 0x00000000, \ -0x00080600, 0x00101B10, 0x00050004, 0x00100826, \ -0x00101210, 0x00380C34, 0x00000000, 0x00000000, \ -0x0021155B, 0x00100099, 0x00206559, 0x0010009C, \ -0x00244559, 0x00130836, 0x000C0000, 0x00220C62, \ -0x000C0001, 0x00101B13, 0x00229C0E, 0x00210C0E, \ -0x00226C0E, 0x00216C0E, 0x0022FC0E, 0x00215C0E, \ -0x00214C0E, 0x00380555, 0x00010004, 0x00041000, \ -0x00278C67, 0x00040800, 0x00018100, 0x003A0437, \ -0x00130826, 0x000C0001, 0x00220559, 0x00101313, \ -0x00380559, 0x00000000, 0x00000000, 0x00000000, \ -0x00000000, 0x00000000, 0x00000000, 0x00000000, \ -0x00000000, 0x00130831, 0x0010090B, 0x00124813, \ -0x000CFF80, 0x002606AB, 0x00041000, 0x00010004, \ -0x003806A8, 0x00000000, 0x00000000, 0x00000000, \ -} - -/********************************************************/ -/* Micro code for 8086:1229 Rev 9 */ -/********************************************************/ - -/* Parameter values for the D101S */ -#define D101S_CPUSAVER_TIMER_DWORD 78 -#define D101S_CPUSAVER_BUNDLE_DWORD 67 -#define D101S_CPUSAVER_MIN_SIZE_DWORD 128 - -#define D101S_RCVBUNDLE_UCODE \ -{\ -0x00550242, 0xFFFF047E, 0xFFFFFFFF, 0x06FF0818, 0xFFFFFFFF, 0x05A6FFFF, \ -0x000C0001, 0x00101312, 0x000C0008, 0x00380243, \ -0x0010009C, 0x00204056, 0x002380D0, 0x00380056, \ -0x0010009C, 0x00244F8B, 0x00000800, 0x00124818, \ -0x0038047F, 0x00000000, 0x00140000, 0x003805A3, \ -0x00308000, 0x00100610, 0x00100561, 0x000E0408, \ -0x00134861, 0x000C0002, 0x00103093, 0x00308000, \ -0x00100624, 0x00100561, 0x000E0408, 0x00100861, \ -0x000C007E, 0x00222FA1, 0x000C0002, 0x00103093, \ -0x00380F90, 0x00080000, 0x00103090, 0x00380F90, \ -0x00000000, 0x00000000, 0x00000000, 0x00000000, \ -0x0010009C, 0x00244FAD, 0x00010004, 0x00041000, \ -0x003A047E, 0x00044010, 0x00380819, 0x00000000, \ -0x00100099, 0x00206FFD, 0x0010009A, 0x0020AFFD, \ -0x0010009C, 0x00244FC8, 0x00130824, 0x000C0001, \ -0x00101213, 0x00260FF7, 0x00041000, 0x00010004, \ -0x00130826, 0x000C0006, 0x00220700, 0x0013C926, \ -0x00101313, 0x00380700, 0x00000000, 0x00000000, \ -0x00000000, 0x00000000, 0x00000000, 0x00000000, \ -0x00080600, 0x00101B10, 0x00050004, 0x00100826, \ -0x00101210, 0x00380FB6, 0x00000000, 0x00000000, \ -0x002115A9, 0x00100099, 0x002065A7, 0x0010009A, \ -0x0020A5A7, 0x0010009C, 0x002445A7, 0x00130836, \ -0x000C0000, 0x00220FE4, 0x000C0001, 0x00101B13, \ -0x00229F8E, 0x00210F8E, 0x00226F8E, 0x00216F8E, \ -0x0022FF8E, 0x00215F8E, 0x00214F8E, 0x003805A3, \ -0x00010004, 0x00041000, 0x00278FE9, 0x00040800, \ -0x00018100, 0x003A047E, 0x00130826, 0x000C0001, \ -0x002205A7, 0x00101313, 0x003805A7, 0x00000000, \ -0x00000000, 0x00000000, 0x00000000, 0x00000000, \ -0x00000000, 0x00000000, 0x00000000, 0x00130831, \ -0x0010090B, 0x00124813, 0x000CFF80, 0x00260703, \ -0x00041000, 0x00010004, 0x00380700 \ -} - -/********************************************************/ -/* Micro code for the 8086:1229 Rev F/10 */ -/********************************************************/ - -/* Parameter values for the D102 E-step */ -#define D102_E_CPUSAVER_TIMER_DWORD 42 -#define D102_E_CPUSAVER_BUNDLE_DWORD 54 -#define D102_E_CPUSAVER_MIN_SIZE_DWORD 46 - -#define D102_E_RCVBUNDLE_UCODE \ -{\ -0x007D028F, 0x0E4204F9, 0x14ED0C85, 0x14FA14E9, 0x0EF70E36, 0x1FFF1FFF, \ -0x00E014B9, 0x00000000, 0x00000000, 0x00000000, \ -0x00E014BD, 0x00000000, 0x00000000, 0x00000000, \ -0x00E014D5, 0x00000000, 0x00000000, 0x00000000, \ -0x00000000, 0x00000000, 0x00000000, 0x00000000, \ -0x00E014C1, 0x00000000, 0x00000000, 0x00000000, \ -0x00000000, 0x00000000, 0x00000000, 0x00000000, \ -0x00000000, 0x00000000, 0x00000000, 0x00000000, \ -0x00000000, 0x00000000, 0x00000000, 0x00000000, \ -0x00E014C8, 0x00000000, 0x00000000, 0x00000000, \ -0x00200600, 0x00E014EE, 0x00000000, 0x00000000, \ -0x0030FF80, 0x00940E46, 0x00038200, 0x00102000, \ -0x00E00E43, 0x00000000, 0x00000000, 0x00000000, \ -0x00300006, 0x00E014FB, 0x00000000, 0x00000000, \ -0x00000000, 0x00000000, 0x00000000, 0x00000000, \ -0x00000000, 0x00000000, 0x00000000, 0x00000000, \ -0x00000000, 0x00000000, 0x00000000, 0x00000000, \ -0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000, \ -0x00906EFD, 0x00900EFD, 0x00E00EF8, 0x00000000, \ -0x00000000, 0x00000000, 0x00000000, 0x00000000, \ -0x00000000, 0x00000000, 0x00000000, 0x00000000, \ -0x00000000, 0x00000000, 0x00000000, 0x00000000, \ -0x00000000, 0x00000000, 0x00000000, 0x00000000, \ -0x00000000, 0x00000000, 0x00000000, 0x00000000, \ -0x00000000, 0x00000000, 0x00000000, 0x00000000, \ -0x00000000, 0x00000000, 0x00000000, 0x00000000, \ -0x00000000, 0x00000000, 0x00000000, 0x00000000, \ -0x00000000, 0x00000000, 0x00000000, 0x00000000, \ -0x00000000, 0x00000000, 0x00000000, 0x00000000, \ -0x00000000, 0x00000000, 0x00000000, 0x00000000, \ -0x00000000, 0x00000000, 0x00000000, 0x00000000, \ -0x00000000, 0x00000000, 0x00000000, 0x00000000, \ -0x00000000, 0x00000000, 0x00000000, 0x00000000, \ -} - static void e100_load_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb) { -/* *INDENT-OFF* */ - static struct { - u32 ucode[UCODE_SIZE + 1]; - u8 mac; - u8 timer_dword; - u8 bundle_dword; - u8 min_size_dword; - } ucode_opts[] = { - { D101M_B_RCVBUNDLE_UCODE, - mac_82559_D101M, - D101M_CPUSAVER_TIMER_DWORD, - D101M_CPUSAVER_BUNDLE_DWORD, - D101M_CPUSAVER_MIN_SIZE_DWORD }, - { D101S_RCVBUNDLE_UCODE, - mac_82559_D101S, - D101S_CPUSAVER_TIMER_DWORD, - D101S_CPUSAVER_BUNDLE_DWORD, - D101S_CPUSAVER_MIN_SIZE_DWORD }, - { D102_E_RCVBUNDLE_UCODE, - mac_82551_F, - D102_E_CPUSAVER_TIMER_DWORD, - D102_E_CPUSAVER_BUNDLE_DWORD, - D102_E_CPUSAVER_MIN_SIZE_DWORD }, - { D102_E_RCVBUNDLE_UCODE, - mac_82551_10, - D102_E_CPUSAVER_TIMER_DWORD, - D102_E_CPUSAVER_BUNDLE_DWORD, - D102_E_CPUSAVER_MIN_SIZE_DWORD }, - { {0}, 0, 0, 0, 0} - }, *opts; -/* *INDENT-ON* */ - -#define BUNDLESMALL 1 -#define BUNDLEMAX 50 -#define INTDELAY 15000 - - opts = ucode_opts; - - /* do not load u-code for ICH devices */ - if (nic->flags & ich) - return; - - /* Search for ucode match against h/w rev_id */ - while (opts->mac) { - if (nic->mac == opts->mac) { - int i; - u32 *ucode = opts->ucode; - - /* Insert user-tunable settings */ - ucode[opts->timer_dword] &= 0xFFFF0000; - ucode[opts->timer_dword] |= - (u16) INTDELAY; - ucode[opts->bundle_dword] &= 0xFFFF0000; - ucode[opts->bundle_dword] |= (u16) BUNDLEMAX; - ucode[opts->min_size_dword] &= 0xFFFF0000; - ucode[opts->min_size_dword] |= - (BUNDLESMALL) ? 0xFFFF : 0xFF80; - - for(i = 0; i < UCODE_SIZE; i++) - cb->u.ucode[i] = cpu_to_le32(ucode[i]); - cb->command = cpu_to_le16(cb_ucode); - return; - } - opts++; - } + int i; + static const u32 ucode[UCODE_SIZE] = { + /* NFS packets are misinterpreted as TCO packets and + * incorrectly routed to the BMC over SMBus. This + * microcode patch checks the fragmented IP bit in the + * NFS/UDP header to distinguish between NFS and TCO. */ + 0x0EF70E36, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF, + 0x1FFF1FFF, 0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000, + 0x00906EFD, 0x00900EFD, 0x00E00EF8, + }; - cb->command = cpu_to_le16(cb_nop); + if(nic->mac == mac_82551_F || nic->mac == mac_82551_10) { + for(i = 0; i < UCODE_SIZE; i++) + cb->u.ucode[i] = cpu_to_le32(ucode[i]); + cb->command = cpu_to_le16(cb_ucode); + } else + cb->command = cpu_to_le16(cb_nop); } static void e100_setup_iaaddr(struct nic *nic, struct cb *cb, -- cgit v0.10.2 From 68399bb5080c1d96f2110b0a040b39d3ccd7a18a Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 11 Oct 2005 01:44:14 -0400 Subject: [libata pdc_adma] license update, minor cleanup from me: change from OSL+GPL to GPL (with approval) from Mark: Gets rid of an unneeded control bit, slightly increasing throughput. diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c index ce006a5..53b8db4 100644 --- a/drivers/scsi/pdc_adma.c +++ b/drivers/scsi/pdc_adma.c @@ -5,21 +5,24 @@ * * Copyright 2005 Mark Lord * - * The contents of this file are subject to the Open - * Software License version 1.1 that can be found at - * http://www.opensource.org/licenses/osl-1.1.txt and is included herein - * by reference. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* * - * Alternatively, the contents of this file may be used under the terms - * of the GNU General Public License version 2 (the "GPL") as distributed - * in the kernel source COPYING file, in which case the provisions of - * the GPL are applicable instead of the above. If you wish to allow - * the use of your version of this file only under the terms of the - * GPL and not to allow others to use your version of this file under - * the OSL, indicate your decision by deleting the provisions above and - * replace them with the notice and other provisions required by the GPL. - * If you do not delete the provisions above, a recipient may use your - * version of this file under either the OSL or the GPL. * * Supports ATA disks in single-packet ADMA mode. * Uses PIO for everything else. @@ -76,7 +79,6 @@ enum { aNIEN = (1 << 8), /* irq mask: 1==masked */ aGO = (1 << 7), /* packet trigger ("Go!") */ aRSTADM = (1 << 5), /* ADMA logic reset */ - aAUTEN = (1 << 3), /* packet trigger ("Go!") */ aRSTA = (1 << 2), /* ATA hard reset */ aPIOMD4 = 0x0003, /* PIO mode 4 */ @@ -415,7 +417,7 @@ static inline void adma_packet_start(struct ata_queued_cmd *qc) VPRINTK("ENTER, ap %p\n", ap); /* fire up the ADMA engine */ - writew(aPIOMD4 | aGO | aAUTEN, chan + ADMA_CONTROL); + writew(aPIOMD4 | aGO, chan + ADMA_CONTROL); } static int adma_qc_issue(struct ata_queued_cmd *qc) -- cgit v0.10.2 From 9621904012de3c8d0d4e2904dcc7170b3012119e Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 11 Oct 2005 01:52:39 -0400 Subject: sata_nv: Fixed bug introduced by 0.08's MCP51 and MCP55 support. diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index c05653c..cb832b0 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -29,6 +29,8 @@ * NV-specific details such as register offsets, SATA phy location, * hotplug info, etc. * + * 0.09 + * - Fixed bug introduced by 0.08's MCP51 and MCP55 support. * * 0.08 * - Added support for MCP51 and MCP55. @@ -132,9 +134,7 @@ enum nv_host_type GENERIC, NFORCE2, NFORCE3, - CK804, - MCP51, - MCP55 + CK804 }; static struct pci_device_id nv_pci_tbl[] = { @@ -153,13 +153,13 @@ static struct pci_device_id nv_pci_tbl[] = { { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP51 }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP51 }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP55 }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP55 }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE<<8, 0xffff00, GENERIC }, -- cgit v0.10.2 From e5945b4f605d1479d5b44252a2c691168c5d38d6 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Tue, 11 Oct 2005 08:28:59 -0700 Subject: [PATCH] s390: ccw device reconnect oops. Search for a disconnect ccw_device on the ccw bus rather than on the css bus (was a typo in patch I did for the klist conversion). A cast to an embedding ccw_device from an embedded device in a struct subchannel will lead us to oopses. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index 14c76f5..9adc11e 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -544,7 +544,7 @@ get_disc_ccwdev_by_devno(unsigned int devno, struct ccw_device *sibling) .sibling = sibling, }; - dev = bus_find_device(&css_bus_type, NULL, &data, match_devno); + dev = bus_find_device(&ccw_bus_type, NULL, &data, match_devno); return dev ? to_ccwdev(dev) : NULL; } -- cgit v0.10.2 From e4314bf496bb7bb9acd754aeb319c30869bc8d76 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Tue, 11 Oct 2005 08:29:00 -0700 Subject: [PATCH] ppc64: Fix PCI hotplug pSeries_irq_bus_setup is marked __devinit but references s7a_workaround which is marked __initdata. Depending on who got the memory for s7a_workaround (and if the value was now positive), it was possible for PCI hotplugged devices to have 3 subtracted from their interrupt number. This would happen randomly and caused me much confusion :) Signed-off-by: Anton Blanchard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/ppc64/kernel/pSeries_pci.c b/arch/ppc64/kernel/pSeries_pci.c index 1f5f141..928f8fe 100644 --- a/arch/ppc64/kernel/pSeries_pci.c +++ b/arch/ppc64/kernel/pSeries_pci.c @@ -32,7 +32,7 @@ #include "pci.h" -static int __initdata s7a_workaround = -1; +static int __devinitdata s7a_workaround = -1; #if 0 void pcibios_name_device(struct pci_dev *dev) @@ -60,7 +60,7 @@ void pcibios_name_device(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_name_device); #endif -static void __init check_s7a(void) +static void __devinit check_s7a(void) { struct device_node *root; char *model; -- cgit v0.10.2 From ad6ce87e5bd4440a6ce9aa9f8cda795b9e902eff Mon Sep 17 00:00:00 2001 From: Abhay Salunke Date: Tue, 11 Oct 2005 08:29:02 -0700 Subject: [PATCH] dell_rbu: changes in packet update mechanism In the current dell_rbu code ver 2.0 the packet update mechanism makes the user app dump every individual packet in to the driver. This adds in efficiency as every packet update makes the /sys/class/firmware/dell_rbu/loading and data files to disappear and reappear again. Thus the user app needs to wait for the files to reappear to dump another packet. This slows down the packet update tremendously in case of large number of packets. I am submitting a new patch for dell_rbu which will change the way we do packet updates; In the new method the user app will create a new single file which has already packetized the rbu image and all the packets are now staged in this file. This driver also creates a new entry in /sys/devices/platform/dell_rbu/packet_size ; the user needs to echo the packet size here before downloading the packet file. The user should do the following: create one single file which has all the packets stacked together. echo the packet size in to /sys/devices/platform/dell_rbu/packet_size. echo 1 > /sys/class/firmware/dell_rbu/loading cat the packetfile > /sys/class/firmware/dell_rbu/data echo 0 > /sys/class/firmware/dell_rbu/loading The driver takes the file which came through /sys/class/firmware/dell_rbu/data and takes chunks of paket_size data from it and place in contiguous memory. This makes packet update process very efficient and fast. As all the packet update happens in one single operation. The user can still read back the downloaded file from /sys/devices/platform/dell_rbu/data. Signed-off-by: Abhay Salunke Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/dell_rbu.txt b/Documentation/dell_rbu.txt index 95d7f62..941343a 100644 --- a/Documentation/dell_rbu.txt +++ b/Documentation/dell_rbu.txt @@ -35,6 +35,7 @@ The driver load creates the following directories under the /sys file system. /sys/class/firmware/dell_rbu/data /sys/devices/platform/dell_rbu/image_type /sys/devices/platform/dell_rbu/data +/sys/devices/platform/dell_rbu/packet_size The driver supports two types of update mechanism; monolithic and packetized. These update mechanism depends upon the BIOS currently running on the system. @@ -47,8 +48,26 @@ By default the driver uses monolithic memory for the update type. This can be changed to packets during the driver load time by specifying the load parameter image_type=packet. This can also be changed later as below echo packet > /sys/devices/platform/dell_rbu/image_type -Also echoing either mono ,packet or init in to image_type will free up the -memory allocated by the driver. + +In packet update mode the packet size has to be given before any packets can +be downloaded. It is done as below +echo XXXX > /sys/devices/platform/dell_rbu/packet_size +In the packet update mechanism, the user neesd to create a new file having +packets of data arranged back to back. It can be done as follows +The user creates packets header, gets the chunk of the BIOS image and +placs it next to the packetheader; now, the packetheader + BIOS image chunk +added to geather should match the specified packet_size. This makes one +packet, the user needs to create more such packets out of the entire BIOS +image file and then arrange all these packets back to back in to one single +file. +This file is then copied to /sys/class/firmware/dell_rbu/data. +Once this file gets to the driver, the driver extracts packet_size data from +the file and spreads it accross the physical memory in contiguous packet_sized +space. +This method makes sure that all the packets get to the driver in a single operation. + +In monolithic update the user simply get the BIOS image (.hdr file) and copies +to the data file as is without any change to the BIOS image itself. Do the steps below to download the BIOS image. 1) echo 1 > /sys/class/firmware/dell_rbu/loading @@ -58,7 +77,10 @@ Do the steps below to download the BIOS image. The /sys/class/firmware/dell_rbu/ entries will remain till the following is done. echo -1 > /sys/class/firmware/dell_rbu/loading. -Until this step is completed the drivr cannot be unloaded. +Until this step is completed the driver cannot be unloaded. +Also echoing either mono ,packet or init in to image_type will free up the +memory allocated by the driver. + If an user by accident executes steps 1 and 3 above without executing step 2; it will make the /sys/class/firmware/dell_rbu/ entries to disappear. The entries can be recreated by doing the following @@ -66,15 +88,11 @@ echo init > /sys/devices/platform/dell_rbu/image_type NOTE: echoing init in image_type does not change it original value. Also the driver provides /sys/devices/platform/dell_rbu/data readonly file to -read back the image downloaded. This is useful in case of packet update -mechanism where the above steps 1,2,3 will repeated for every packet. -By reading the /sys/devices/platform/dell_rbu/data file all packet data -downloaded can be verified in a single file. -The packets are arranged in this file one after the other in a FIFO order. +read back the image downloaded. NOTE: -This driver requires a patch for firmware_class.c which has the addition -of request_firmware_nowait_nohotplug function to wortk +This driver requires a patch for firmware_class.c which has the modified +request_firmware_nowait function. Also after updating the BIOS image an user mdoe application neeeds to execute code which message the BIOS update request to the BIOS. So on the next reboot the BIOS knows about the new image downloaded and it updates it self. diff --git a/drivers/firmware/dell_rbu.c b/drivers/firmware/dell_rbu.c index b667823..4f4ba9b 100644 --- a/drivers/firmware/dell_rbu.c +++ b/drivers/firmware/dell_rbu.c @@ -50,7 +50,7 @@ MODULE_AUTHOR("Abhay Salunke "); MODULE_DESCRIPTION("Driver for updating BIOS image on DELL systems"); MODULE_LICENSE("GPL"); -MODULE_VERSION("2.0"); +MODULE_VERSION("3.0"); #define BIOS_SCAN_LIMIT 0xffffffff #define MAX_IMAGE_LENGTH 16 @@ -62,15 +62,16 @@ static struct _rbu_data { int dma_alloc; spinlock_t lock; unsigned long packet_read_count; - unsigned long packet_write_count; unsigned long num_packets; unsigned long packetsize; + unsigned long imagesize; int entry_created; } rbu_data; static char image_type[MAX_IMAGE_LENGTH + 1] = "mono"; module_param_string(image_type, image_type, sizeof (image_type), 0); -MODULE_PARM_DESC(image_type, "BIOS image type. choose- mono or packet"); +MODULE_PARM_DESC(image_type, + "BIOS image type. choose- mono or packet or init"); struct packet_data { struct list_head list; @@ -88,55 +89,13 @@ static dma_addr_t dell_rbu_dmaaddr; static void init_packet_head(void) { INIT_LIST_HEAD(&packet_data_head.list); - rbu_data.packet_write_count = 0; rbu_data.packet_read_count = 0; rbu_data.num_packets = 0; rbu_data.packetsize = 0; + rbu_data.imagesize = 0; } -static int fill_last_packet(void *data, size_t length) -{ - struct list_head *ptemp_list; - struct packet_data *packet = NULL; - int packet_count = 0; - - pr_debug("fill_last_packet: entry \n"); - - if (!rbu_data.num_packets) { - pr_debug("fill_last_packet: num_packets=0\n"); - return -ENOMEM; - } - - packet_count = rbu_data.num_packets; - - ptemp_list = (&packet_data_head.list)->prev; - - packet = list_entry(ptemp_list, struct packet_data, list); - - if ((rbu_data.packet_write_count + length) > rbu_data.packetsize) { - pr_debug("dell_rbu:%s: packet size data " - "overrun\n", __FUNCTION__); - return -EINVAL; - } - - pr_debug("fill_last_packet : buffer = %p\n", packet->data); - - memcpy((packet->data + rbu_data.packet_write_count), data, length); - - if ((rbu_data.packet_write_count + length) == rbu_data.packetsize) { - /* - * this was the last data chunk in the packet - * so reinitialize the packet data counter to zero - */ - rbu_data.packet_write_count = 0; - } else - rbu_data.packet_write_count += length; - - pr_debug("fill_last_packet: exit \n"); - return 0; -} - -static int create_packet(size_t length) +static int create_packet(void *data, size_t length) { struct packet_data *newpacket; int ordernum = 0; @@ -186,9 +145,11 @@ static int create_packet(size_t length) INIT_LIST_HEAD(&newpacket->list); list_add_tail(&newpacket->list, &packet_data_head.list); /* - * packets have fixed size + * packets may not have fixed size */ - newpacket->length = rbu_data.packetsize; + newpacket->length = length; + + memcpy(newpacket->data, data, length); pr_debug("create_packet: exit \n"); @@ -198,13 +159,37 @@ static int create_packet(size_t length) static int packetize_data(void *data, size_t length) { int rc = 0; + int done = 0; + int packet_length; + u8 *temp; + u8 *end = (u8 *) data + length; + pr_debug("packetize_data: data length %d\n", length); + if (!rbu_data.packetsize) { + printk(KERN_WARNING + "dell_rbu: packetsize not specified\n"); + return -EIO; + } - if (!rbu_data.packet_write_count) { - if ((rc = create_packet(length))) + temp = (u8 *) data; + + /* packetize the hunk */ + while (!done) { + if ((temp + rbu_data.packetsize) < end) + packet_length = rbu_data.packetsize; + else { + /* this is the last packet */ + packet_length = end - temp; + done = 1; + } + + if ((rc = create_packet(temp, packet_length))) return rc; + + pr_debug("%lu:%lu\n", temp, (end - temp)); + temp += packet_length; } - if ((rc = fill_last_packet(data, length))) - return rc; + + rbu_data.imagesize = length; return rc; } @@ -243,7 +228,7 @@ static int do_packet_read(char *data, struct list_head *ptemp_list, return bytes_copied; } -static int packet_read_list(char *data, size_t *pread_length) +static int packet_read_list(char *data, size_t * pread_length) { struct list_head *ptemp_list; int temp_count = 0; @@ -303,10 +288,9 @@ static void packet_empty_list(void) newpacket->ordernum); kfree(newpacket); } - rbu_data.packet_write_count = 0; rbu_data.packet_read_count = 0; rbu_data.num_packets = 0; - rbu_data.packetsize = 0; + rbu_data.imagesize = 0; } /* @@ -425,7 +409,6 @@ static ssize_t read_packet_data(char *buffer, loff_t pos, size_t count) size_t bytes_left; size_t data_length; char *ptempBuf = buffer; - unsigned long imagesize; /* check to see if we have something to return */ if (rbu_data.num_packets == 0) { @@ -434,22 +417,20 @@ static ssize_t read_packet_data(char *buffer, loff_t pos, size_t count) goto read_rbu_data_exit; } - imagesize = rbu_data.num_packets * rbu_data.packetsize; - - if (pos > imagesize) { + if (pos > rbu_data.imagesize) { retval = 0; printk(KERN_WARNING "dell_rbu:read_packet_data: " "data underrun\n"); goto read_rbu_data_exit; } - bytes_left = imagesize - pos; + bytes_left = rbu_data.imagesize - pos; data_length = min(bytes_left, count); if ((retval = packet_read_list(ptempBuf, &data_length)) < 0) goto read_rbu_data_exit; - if ((pos + count) > imagesize) { + if ((pos + count) > rbu_data.imagesize) { rbu_data.packet_read_count = 0; /* this was the last copy */ retval = bytes_left; @@ -499,7 +480,7 @@ static ssize_t read_rbu_mono_data(char *buffer, loff_t pos, size_t count) } static ssize_t read_rbu_data(struct kobject *kobj, char *buffer, - loff_t pos, size_t count) + loff_t pos, size_t count) { ssize_t ret_count = 0; @@ -531,13 +512,18 @@ static void callbackfn_rbu(const struct firmware *fw, void *context) memcpy(rbu_data.image_update_buffer, fw->data, fw->size); } else if (!strcmp(image_type, "packet")) { - if (!rbu_data.packetsize) - rbu_data.packetsize = fw->size; - else if (rbu_data.packetsize != fw->size) { + /* + * we need to free previous packets if a + * new hunk of packets needs to be downloaded + */ + packet_empty_list(); + if (packetize_data(fw->data, fw->size)) + /* Incase something goes wrong when we are + * in middle of packetizing the data, we + * need to free up whatever packets might + * have been created before we quit. + */ packet_empty_list(); - rbu_data.packetsize = fw->size; - } - packetize_data(fw->data, fw->size); } else pr_debug("invalid image type specified.\n"); spin_unlock(&rbu_data.lock); @@ -553,7 +539,7 @@ static void callbackfn_rbu(const struct firmware *fw, void *context) } static ssize_t read_rbu_image_type(struct kobject *kobj, char *buffer, - loff_t pos, size_t count) + loff_t pos, size_t count) { int size = 0; if (!pos) @@ -562,7 +548,7 @@ static ssize_t read_rbu_image_type(struct kobject *kobj, char *buffer, } static ssize_t write_rbu_image_type(struct kobject *kobj, char *buffer, - loff_t pos, size_t count) + loff_t pos, size_t count) { int rc = count; int req_firm_rc = 0; @@ -621,25 +607,49 @@ static ssize_t write_rbu_image_type(struct kobject *kobj, char *buffer, return rc; } +static ssize_t read_rbu_packet_size(struct kobject *kobj, char *buffer, + loff_t pos, size_t count) +{ + int size = 0; + if (!pos) { + spin_lock(&rbu_data.lock); + size = sprintf(buffer, "%lu\n", rbu_data.packetsize); + spin_unlock(&rbu_data.lock); + } + return size; +} + +static ssize_t write_rbu_packet_size(struct kobject *kobj, char *buffer, + loff_t pos, size_t count) +{ + unsigned long temp; + spin_lock(&rbu_data.lock); + packet_empty_list(); + sscanf(buffer, "%lu", &temp); + if (temp < 0xffffffff) + rbu_data.packetsize = temp; + + spin_unlock(&rbu_data.lock); + return count; +} + static struct bin_attribute rbu_data_attr = { - .attr = { - .name = "data", - .owner = THIS_MODULE, - .mode = 0444, - }, + .attr = {.name = "data",.owner = THIS_MODULE,.mode = 0444}, .read = read_rbu_data, }; static struct bin_attribute rbu_image_type_attr = { - .attr = { - .name = "image_type", - .owner = THIS_MODULE, - .mode = 0644, - }, + .attr = {.name = "image_type",.owner = THIS_MODULE,.mode = 0644}, .read = read_rbu_image_type, .write = write_rbu_image_type, }; +static struct bin_attribute rbu_packet_size_attr = { + .attr = {.name = "packet_size",.owner = THIS_MODULE,.mode = 0644}, + .read = read_rbu_packet_size, + .write = write_rbu_packet_size, +}; + static int __init dcdrbu_init(void) { int rc = 0; @@ -657,6 +667,8 @@ static int __init dcdrbu_init(void) sysfs_create_bin_file(&rbu_device->dev.kobj, &rbu_data_attr); sysfs_create_bin_file(&rbu_device->dev.kobj, &rbu_image_type_attr); + sysfs_create_bin_file(&rbu_device->dev.kobj, + &rbu_packet_size_attr); rc = request_firmware_nowait(THIS_MODULE, FW_ACTION_NOHOTPLUG, "dell_rbu", &rbu_device->dev, &context, callbackfn_rbu); -- cgit v0.10.2 From 19cba8abd6ca09527c194864ae651db65cbacfe1 Mon Sep 17 00:00:00 2001 From: Latchesar Ionkov Date: Tue, 11 Oct 2005 08:29:03 -0700 Subject: [PATCH] v9fs: remove additional buffer allocation from v9fs_file_read and v9fs_file_write v9fs_file_read and v9fs_file_write use kmalloc to allocate buffers as big as the data buffer received as parameter. kmalloc cannot be used to allocate buffers bigger than 128K, so reading/writing data in chunks bigger than 128k fails. This patch reorganizes v9fs_file_read and v9fs_file_write to allocate only buffers as big as the maximum data that can be sent in one 9P message. Signed-off-by: Latchesar Ionkov Cc: Eric Van Hensbergen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/9p/vfs_file.c b/fs/9p/vfs_file.c index a4799e9..bbc3cc6 100644 --- a/fs/9p/vfs_file.c +++ b/fs/9p/vfs_file.c @@ -175,16 +175,16 @@ static int v9fs_file_lock(struct file *filp, int cmd, struct file_lock *fl) } /** - * v9fs_read - read from a file (internal) + * v9fs_file_read - read from a file * @filep: file pointer to read * @data: data buffer to read data into * @count: size of buffer * @offset: offset at which to read data * */ - static ssize_t -v9fs_read(struct file *filp, char *buffer, size_t count, loff_t * offset) +v9fs_file_read(struct file *filp, char __user * data, size_t count, + loff_t * offset) { struct inode *inode = filp->f_dentry->d_inode; struct v9fs_session_info *v9ses = v9fs_inode2v9ses(inode); @@ -194,6 +194,7 @@ v9fs_read(struct file *filp, char *buffer, size_t count, loff_t * offset) int rsize = 0; int result = 0; int total = 0; + int n; dprintk(DEBUG_VFS, "\n"); @@ -216,10 +217,15 @@ v9fs_read(struct file *filp, char *buffer, size_t count, loff_t * offset) } else *offset += result; - /* XXX - extra copy */ - memcpy(buffer, fcall->params.rread.data, result); + n = copy_to_user(data, fcall->params.rread.data, result); + if (n) { + dprintk(DEBUG_ERROR, "Problem copying to user %d\n", n); + kfree(fcall); + return -EFAULT; + } + count -= result; - buffer += result; + data += result; total += result; kfree(fcall); @@ -232,42 +238,7 @@ v9fs_read(struct file *filp, char *buffer, size_t count, loff_t * offset) } /** - * v9fs_file_read - read from a file - * @filep: file pointer to read - * @data: data buffer to read data into - * @count: size of buffer - * @offset: offset at which to read data - * - */ - -static ssize_t -v9fs_file_read(struct file *filp, char __user * data, size_t count, - loff_t * offset) -{ - int retval = -1; - int ret = 0; - char *buffer; - - buffer = kmalloc(count, GFP_KERNEL); - if (!buffer) - return -ENOMEM; - - retval = v9fs_read(filp, buffer, count, offset); - if (retval > 0) { - if ((ret = copy_to_user(data, buffer, retval)) != 0) { - dprintk(DEBUG_ERROR, "Problem copying to user %d\n", - ret); - retval = ret; - } - } - - kfree(buffer); - - return retval; -} - -/** - * v9fs_write - write to a file + * v9fs_file_write - write to a file * @filep: file pointer to write * @data: data buffer to write data from * @count: size of buffer @@ -276,7 +247,8 @@ v9fs_file_read(struct file *filp, char __user * data, size_t count, */ static ssize_t -v9fs_write(struct file *filp, char *buffer, size_t count, loff_t * offset) +v9fs_file_write(struct file *filp, const char __user * data, + size_t count, loff_t * offset) { struct inode *inode = filp->f_dentry->d_inode; struct v9fs_session_info *v9ses = v9fs_inode2v9ses(inode); @@ -286,30 +258,42 @@ v9fs_write(struct file *filp, char *buffer, size_t count, loff_t * offset) int result = -EIO; int rsize = 0; int total = 0; + char *buf; - dprintk(DEBUG_VFS, "data %p count %d offset %x\n", buffer, (int)count, + dprintk(DEBUG_VFS, "data %p count %d offset %x\n", data, (int)count, (int)*offset); rsize = v9ses->maxdata - V9FS_IOHDRSZ; if (v9fid->iounit != 0 && rsize > v9fid->iounit) rsize = v9fid->iounit; - dump_data(buffer, count); + buf = kmalloc(v9ses->maxdata - V9FS_IOHDRSZ, GFP_KERNEL); + if (!buf) + return -ENOMEM; do { if (count < rsize) rsize = count; - result = - v9fs_t_write(v9ses, fid, *offset, rsize, buffer, &fcall); + result = copy_from_user(buf, data, rsize); + if (result) { + dprintk(DEBUG_ERROR, "Problem copying from user\n"); + kfree(buf); + return -EFAULT; + } + + dump_data(buf, rsize); + result = v9fs_t_write(v9ses, fid, *offset, rsize, buf, &fcall); if (result < 0) { eprintk(KERN_ERR, "error while writing: %s(%d)\n", FCALL_ERROR(fcall), result); kfree(fcall); + kfree(buf); return result; } else *offset += result; kfree(fcall); + fcall = NULL; if (result != rsize) { eprintk(KERN_ERR, @@ -319,46 +303,14 @@ v9fs_write(struct file *filp, char *buffer, size_t count, loff_t * offset) } count -= result; - buffer += result; + data += result; total += result; } while (count); + kfree(buf); return total; } -/** - * v9fs_file_write - write to a file - * @filep: file pointer to write - * @data: data buffer to write data from - * @count: size of buffer - * @offset: offset at which to write data - * - */ - -static ssize_t -v9fs_file_write(struct file *filp, const char __user * data, - size_t count, loff_t * offset) -{ - int ret = -1; - char *buffer; - - buffer = kmalloc(count, GFP_KERNEL); - if (buffer == NULL) - return -ENOMEM; - - ret = copy_from_user(buffer, data, count); - if (ret) { - dprintk(DEBUG_ERROR, "Problem copying from user\n"); - ret = -EFAULT; - } else { - ret = v9fs_write(filp, buffer, count, offset); - } - - kfree(buffer); - - return ret; -} - struct file_operations v9fs_file_operations = { .llseek = generic_file_llseek, .read = v9fs_file_read, -- cgit v0.10.2 From 22c1ea44f0d33eda532883858b6cdabc5f265b66 Mon Sep 17 00:00:00 2001 From: Andreas Gruenbacher Date: Tue, 11 Oct 2005 08:29:05 -0700 Subject: [PATCH] nfsacl: Solaris VxFS compatibility fix Here is a compatibility fix between Linux and Solaris when used with VxFS filesystems: Solaris usually accepts acl entries in any order, but with VxFS it replies with NFSERR_INVAL when it sees a four-entry acl that is not in canonical form. It may also fail with other non-canonical acls -- I can't tell, because that case never triggers: We only send non-canonical acls when we fake up an ACL_MASK entry. Instead of adding fake ACL_MASK entries at the end, inserting them in the correct position makes Solaris+VxFS happy. The Linux client and server sides don't care about entry order. The three-entry-acl special case in which we need a fake ACL_MASK entry was handled in xdr_nfsace_encode. The patch moves this into nfsacl_encode. Signed-off-by: Andreas Gruenbacher Acked-by: Trond Myklebust Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/nfs_common/nfsacl.c b/fs/nfs_common/nfsacl.c index 251e5a1..0c2be8c 100644 --- a/fs/nfs_common/nfsacl.c +++ b/fs/nfs_common/nfsacl.c @@ -48,43 +48,26 @@ xdr_nfsace_encode(struct xdr_array2_desc *desc, void *elem) (struct nfsacl_encode_desc *) desc; u32 *p = (u32 *) elem; - if (nfsacl_desc->count < nfsacl_desc->acl->a_count) { - struct posix_acl_entry *entry = - &nfsacl_desc->acl->a_entries[nfsacl_desc->count++]; + struct posix_acl_entry *entry = + &nfsacl_desc->acl->a_entries[nfsacl_desc->count++]; - *p++ = htonl(entry->e_tag | nfsacl_desc->typeflag); - switch(entry->e_tag) { - case ACL_USER_OBJ: - *p++ = htonl(nfsacl_desc->uid); - break; - case ACL_GROUP_OBJ: - *p++ = htonl(nfsacl_desc->gid); - break; - case ACL_USER: - case ACL_GROUP: - *p++ = htonl(entry->e_id); - break; - default: /* Solaris depends on that! */ - *p++ = 0; - break; - } - *p++ = htonl(entry->e_perm & S_IRWXO); - } else { - const struct posix_acl_entry *pa, *pe; - int group_obj_perm = ACL_READ|ACL_WRITE|ACL_EXECUTE; - - FOREACH_ACL_ENTRY(pa, nfsacl_desc->acl, pe) { - if (pa->e_tag == ACL_GROUP_OBJ) { - group_obj_perm = pa->e_perm & S_IRWXO; - break; - } - } - /* fake up ACL_MASK entry */ - *p++ = htonl(ACL_MASK | nfsacl_desc->typeflag); - *p++ = htonl(0); - *p++ = htonl(group_obj_perm); + *p++ = htonl(entry->e_tag | nfsacl_desc->typeflag); + switch(entry->e_tag) { + case ACL_USER_OBJ: + *p++ = htonl(nfsacl_desc->uid); + break; + case ACL_GROUP_OBJ: + *p++ = htonl(nfsacl_desc->gid); + break; + case ACL_USER: + case ACL_GROUP: + *p++ = htonl(entry->e_id); + break; + default: /* Solaris depends on that! */ + *p++ = 0; + break; } - + *p++ = htonl(entry->e_perm & S_IRWXO); return 0; } @@ -105,11 +88,28 @@ nfsacl_encode(struct xdr_buf *buf, unsigned int base, struct inode *inode, .gid = inode->i_gid, }; int err; + struct posix_acl *acl2 = NULL; if (entries > NFS_ACL_MAX_ENTRIES || xdr_encode_word(buf, base, entries)) return -EINVAL; + if (encode_entries && acl && acl->a_count == 3) { + /* Fake up an ACL_MASK entry. */ + acl2 = posix_acl_alloc(4, GFP_KERNEL); + if (!acl2) + return -ENOMEM; + /* Insert entries in canonical order: other orders seem + to confuse Solaris VxFS. */ + acl2->a_entries[0] = acl->a_entries[0]; /* ACL_USER_OBJ */ + acl2->a_entries[1] = acl->a_entries[1]; /* ACL_GROUP_OBJ */ + acl2->a_entries[2] = acl->a_entries[1]; /* ACL_MASK */ + acl2->a_entries[2].e_tag = ACL_MASK; + acl2->a_entries[3] = acl->a_entries[2]; /* ACL_OTHER */ + nfsacl_desc.acl = acl2; + } err = xdr_encode_array2(buf, base + 4, &nfsacl_desc.desc); + if (acl2) + posix_acl_release(acl2); if (!err) err = 8 + nfsacl_desc.desc.elem_size * nfsacl_desc.desc.array_len; -- cgit v0.10.2 From 1bef40032992320dd25a266fc166bfb8fa3f2f59 Mon Sep 17 00:00:00 2001 From: Suzuki Date: Tue, 11 Oct 2005 08:29:06 -0700 Subject: [PATCH] madvise: Avoid returning error code -EBADF for anonymous mappings Revert this recent correctness change: Douglas Crosher reported that it broke an existing application, and that madvise() works without error on anonymous mappings on Solaris. This means that madvise() will remain non-standards-compliant: we should return -EBADF for all requests against non-file-backed vma's, but Linux only does this for MADV_WILLNEED requests. Signed-off-by: Suzuki K P Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/madvise.c b/mm/madvise.c index 4454936..20e075d 100644 --- a/mm/madvise.c +++ b/mm/madvise.c @@ -83,6 +83,9 @@ static long madvise_willneed(struct vm_area_struct * vma, { struct file *file = vma->vm_file; + if (!file) + return -EBADF; + if (file->f_mapping->a_ops->get_xip_page) { /* no bad return value, but ignore advice */ return 0; @@ -141,11 +144,7 @@ static long madvise_vma(struct vm_area_struct *vma, struct vm_area_struct **prev, unsigned long start, unsigned long end, int behavior) { - struct file *filp = vma->vm_file; - long error = -EBADF; - - if (!filp) - goto out; + long error; switch (behavior) { case MADV_NORMAL: @@ -166,8 +165,6 @@ madvise_vma(struct vm_area_struct *vma, struct vm_area_struct **prev, error = -EINVAL; break; } - -out: return error; } -- cgit v0.10.2 From a0c111c631e7ab4abd68920debd44259160812ef Mon Sep 17 00:00:00 2001 From: Paolo Galtieri Date: Tue, 11 Oct 2005 08:29:07 -0700 Subject: [PATCH] ppc highmem fix I've noticed that the calculations for seg_size and nr_segs in __dma_sync_page_highmem() (arch/ppc/kernel/dma-mapping.c) are wrong. The incorrect calculations can result in either an oops or a panic when running fsck depending on the size of the partition. The problem with the seg_size calculation is that it can result in a negative number if size is offset > size. The problem with the nr_segs caculation is returns the wrong number of segments, e.g. it returns 1 when size is 200 and offset is 4095, when it should return 2 or more. Acked-by: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/ppc/kernel/dma-mapping.c b/arch/ppc/kernel/dma-mapping.c index b566d98..8edee80 100644 --- a/arch/ppc/kernel/dma-mapping.c +++ b/arch/ppc/kernel/dma-mapping.c @@ -401,10 +401,10 @@ EXPORT_SYMBOL(__dma_sync); static inline void __dma_sync_page_highmem(struct page *page, unsigned long offset, size_t size, int direction) { - size_t seg_size = min((size_t)PAGE_SIZE, size) - offset; + size_t seg_size = min((size_t)(PAGE_SIZE - offset), size); size_t cur_size = seg_size; unsigned long flags, start, seg_offset = offset; - int nr_segs = PAGE_ALIGN(size + (PAGE_SIZE - offset))/PAGE_SIZE; + int nr_segs = 1 + ((size - seg_size) + PAGE_SIZE - 1)/PAGE_SIZE; int seg_nr = 0; local_irq_save(flags); -- cgit v0.10.2 From 6de505173e24e76bb33a2595312e0c2b44d49e58 Mon Sep 17 00:00:00 2001 From: "akpm@osdl.org" Date: Tue, 11 Oct 2005 08:29:08 -0700 Subject: [PATCH] binfmt_elf bss padding fix Nir Tzachar points out that if an ELF file specifies a zero-length bss at a whacky address, we cannot load that binary because padzero() tries to zero out the end of the page at the whacky address, and that may not be writeable. See also http://bugzilla.kernel.org/show_bug.cgi?id=5411 So teach load_elf_binary() to skip the bss settng altogether if the elf file has a zero-length bss segment. Cc: Roland McGrath Cc: Daniel Jacobowitz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index 7976a23..d4b1557 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -905,7 +905,7 @@ static int load_elf_binary(struct linux_binprm * bprm, struct pt_regs * regs) send_sig(SIGKILL, current, 0); goto out_free_dentry; } - if (padzero(elf_bss)) { + if (likely(elf_bss != elf_brk) && unlikely(padzero(elf_bss))) { send_sig(SIGSEGV, current, 0); retval = -EFAULT; /* Nobody gets to see this, but.. */ goto out_free_dentry; -- cgit v0.10.2 From 9de11aab1c8fd87da7e1fb435ce0ff26bacd7909 Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Tue, 11 Oct 2005 08:29:09 -0700 Subject: [PATCH] m32r: trap handler code for illegal traps This patch prevents illegal traps from causing m32r kernel's infinite loop execution. Signed-off-by: Naoto Sugai Signed-off-by: Hirokazu Takata Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/m32r/kernel/entry.S b/arch/m32r/kernel/entry.S index dddbf6b..85920fb 100644 --- a/arch/m32r/kernel/entry.S +++ b/arch/m32r/kernel/entry.S @@ -681,6 +681,15 @@ ENTRY(debug_trap) bl do_debug_trap bra error_code +ENTRY(ill_trap) + /* void ill_trap(void) */ + SWITCH_TO_KERNEL_STACK + SAVE_ALL + ldi r1, #0 ; error_code ; FIXME + mv r0, sp ; pt_regs + bl do_ill_trap + bra error_code + /* Cache flushing handler */ ENTRY(cache_flushing_handler) diff --git a/arch/m32r/kernel/traps.c b/arch/m32r/kernel/traps.c index 0192227..5fe8ed6 100644 --- a/arch/m32r/kernel/traps.c +++ b/arch/m32r/kernel/traps.c @@ -5,8 +5,6 @@ * Hitoshi Yamamoto */ -/* $Id$ */ - /* * 'traps.c' handles hardware traps and faults after we have saved some * state in 'entry.S'. @@ -35,6 +33,7 @@ asmlinkage void ei_handler(void); asmlinkage void rie_handler(void); asmlinkage void debug_trap(void); asmlinkage void cache_flushing_handler(void); +asmlinkage void ill_trap(void); #ifdef CONFIG_SMP extern void smp_reschedule_interrupt(void); @@ -77,22 +76,22 @@ void set_eit_vector_entries(void) eit_vector[5] = BRA_INSN(default_eit_handler, 5); eit_vector[8] = BRA_INSN(rie_handler, 8); eit_vector[12] = BRA_INSN(alignment_check, 12); - eit_vector[16] = 0xff000000UL; + eit_vector[16] = BRA_INSN(ill_trap, 16); eit_vector[17] = BRA_INSN(debug_trap, 17); eit_vector[18] = BRA_INSN(system_call, 18); - eit_vector[19] = 0xff000000UL; - eit_vector[20] = 0xff000000UL; - eit_vector[21] = 0xff000000UL; - eit_vector[22] = 0xff000000UL; - eit_vector[23] = 0xff000000UL; - eit_vector[24] = 0xff000000UL; - eit_vector[25] = 0xff000000UL; - eit_vector[26] = 0xff000000UL; - eit_vector[27] = 0xff000000UL; + eit_vector[19] = BRA_INSN(ill_trap, 19); + eit_vector[20] = BRA_INSN(ill_trap, 20); + eit_vector[21] = BRA_INSN(ill_trap, 21); + eit_vector[22] = BRA_INSN(ill_trap, 22); + eit_vector[23] = BRA_INSN(ill_trap, 23); + eit_vector[24] = BRA_INSN(ill_trap, 24); + eit_vector[25] = BRA_INSN(ill_trap, 25); + eit_vector[26] = BRA_INSN(ill_trap, 26); + eit_vector[27] = BRA_INSN(ill_trap, 27); eit_vector[28] = BRA_INSN(cache_flushing_handler, 28); - eit_vector[29] = 0xff000000UL; - eit_vector[30] = 0xff000000UL; - eit_vector[31] = 0xff000000UL; + eit_vector[29] = BRA_INSN(ill_trap, 29); + eit_vector[30] = BRA_INSN(ill_trap, 30); + eit_vector[31] = BRA_INSN(ill_trap, 31); eit_vector[32] = BRA_INSN(ei_handler, 32); eit_vector[64] = BRA_INSN(pie_handler, 64); #ifdef CONFIG_MMU @@ -286,7 +285,8 @@ asmlinkage void do_##name(struct pt_regs * regs, long error_code) \ DO_ERROR( 1, SIGTRAP, "debug trap", debug_trap) DO_ERROR_INFO(0x20, SIGILL, "reserved instruction ", rie_handler, ILL_ILLOPC, regs->bpc) -DO_ERROR_INFO(0x100, SIGILL, "privilege instruction", pie_handler, ILL_PRVOPC, regs->bpc) +DO_ERROR_INFO(0x100, SIGILL, "privileged instruction", pie_handler, ILL_PRVOPC, regs->bpc) +DO_ERROR_INFO(-1, SIGILL, "illegal trap", ill_trap, ILL_ILLTRP, regs->bpc) extern int handle_unaligned_access(unsigned long, struct pt_regs *); @@ -329,4 +329,3 @@ asmlinkage void do_alignment_check(struct pt_regs *regs, long error_code) set_fs(oldfs); } } - -- cgit v0.10.2 From d3089792f6ee38cdc9e254a7cb2f8c8d7f38c20d Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Tue, 11 Oct 2005 09:28:24 -0700 Subject: [PATCH] V4L: Enable s-video input on DViCO FusionHDTV5 Lite * bttv-cards.c: - Enable S-Video input on DViCO FusionHDTV5 Lite Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/media/video/bttv-cards.c b/drivers/media/video/bttv-cards.c index 6c33280..0881a17 100644 --- a/drivers/media/video/bttv-cards.c +++ b/drivers/media/video/bttv-cards.c @@ -2393,10 +2393,10 @@ struct tvcard bttv_tvcards[] = { .tuner = 0, .tuner_type = TUNER_LG_TDVS_H062F, .tuner_addr = ADDR_UNSET, - .video_inputs = 2, + .video_inputs = 3, .audio_inputs = 1, .svhs = 2, - .muxsel = { 2, 3 }, + .muxsel = { 2, 3, 1 }, .gpiomask = 0x00e00007, .audiomux = { 0x00400005, 0, 0x00000001, 0, 0x00c00007, 0 }, .no_msp34xx = 1, -- cgit v0.10.2 From 9149ccfa3571eaa4a4b444777d67fc4ed3ebcf27 Mon Sep 17 00:00:00 2001 From: Peter Bergner Date: Tue, 11 Oct 2005 09:28:24 -0700 Subject: [PATCH] ppc64: Add R_PPC64_TOC16 module reloc Newer gcc's are generating this relocation, so the module loader needs to handle it. Signed-off-by: Peter Bergner Signed-off-by: Anton Blanchard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/ppc64/kernel/module.c b/arch/ppc64/kernel/module.c index c683bf8..928b858 100644 --- a/arch/ppc64/kernel/module.c +++ b/arch/ppc64/kernel/module.c @@ -341,6 +341,19 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, *(unsigned long *)location = my_r2(sechdrs, me); break; + case R_PPC64_TOC16: + /* Subtact TOC pointer */ + value -= my_r2(sechdrs, me); + if (value + 0x8000 > 0xffff) { + printk("%s: bad TOC16 relocation (%lu)\n", + me->name, value); + return -ENOEXEC; + } + *((uint16_t *) location) + = (*((uint16_t *) location) & ~0xffff) + | (value & 0xffff); + break; + case R_PPC64_TOC16_DS: /* Subtact TOC pointer */ value -= my_r2(sechdrs, me); -- cgit v0.10.2 From f5154a98a1931641f0448f6512294a15279110d7 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Tue, 11 Oct 2005 19:16:26 +0100 Subject: [PATCH] Don't map the same page too much Refuse to install a page into a mapping if the mapping count is already ridiculously large. You probably cannot trigger this on 32-bit architectures, but on a 64-bit setup we should protect against it. Signed-off-by: Hugh Dickins Signed-off-by: Linus Torvalds diff --git a/mm/fremap.c b/mm/fremap.c index 3235fb7..ab23a06 100644 --- a/mm/fremap.c +++ b/mm/fremap.c @@ -89,6 +89,9 @@ int install_page(struct mm_struct *mm, struct vm_area_struct *vma, size = (i_size_read(inode) + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT; if (!page->mapping || page->index >= size) goto err_unlock; + err = -ENOMEM; + if (page_mapcount(page) > INT_MAX/2) + goto err_unlock; zap_pte(mm, vma, addr, pte); -- cgit v0.10.2 From b1b510aa284af1908d5d369d52f7dae16aaabd71 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 11 Oct 2005 15:45:16 -0700 Subject: [SPARC64]: Fix net booting on Ultra5 We were not doing alignment properly when remapping the kernel image. What we want is a 4MB aligned physical address to map at KERNBASE. Mistakedly we were 4MB aligning the virtual address where the kernel initially sits, that's wrong. Instead, we should PAGE align the virtual address, then 4MB align the physical address result the prom gives to us. Signed-off-by: David S. Miller diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S index f1dcdf8..4c942f7 100644 --- a/arch/sparc64/kernel/head.S +++ b/arch/sparc64/kernel/head.S @@ -191,8 +191,9 @@ prom_boot_mapping_phys_low: stx %l3, [%sp + 2047 + 128 + 0x10] ! num_rets, 5 stx %l2, [%sp + 2047 + 128 + 0x18] ! arg1: "translate" stx %l5, [%sp + 2047 + 128 + 0x20] ! arg2: prom_mmu_ihandle_cache - srlx %l0, 22, %l3 - sllx %l3, 22, %l3 + /* PAGE align */ + srlx %l0, 13, %l3 + sllx %l3, 13, %l3 stx %l3, [%sp + 2047 + 128 + 0x28] ! arg3: vaddr, our PC stx %g0, [%sp + 2047 + 128 + 0x30] ! res1 stx %g0, [%sp + 2047 + 128 + 0x38] ! res2 @@ -211,6 +212,9 @@ prom_boot_mapping_phys_low: ldx [%sp + 2047 + 128 + 0x48], %l2 ! physaddr high stx %l2, [%l4 + 0x0] ldx [%sp + 2047 + 128 + 0x50], %l3 ! physaddr low + /* 4MB align */ + srlx %l3, 22, %l3 + sllx %l3, 22, %l3 stx %l3, [%l4 + 0x8] /* Leave service as-is, "call-method" */ -- cgit v0.10.2 From 91acb21f084aa244f26839406ae7ed8aa3668058 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Mon, 10 Oct 2005 23:10:32 -0400 Subject: [PATCH] uml: revert block driver use of host AIO The patch to use host AIO support that I submitted early after 2.6.13 exposed some problems in the block driver. I have fixes for these, but am not comfortable putting them into 2.6.14 at this late date. So, this patch reverts the use of host AIO. I will resubmit the original patch, plus fixes to the driver after 2.6.14 in order to get a reasonable amount of testing before they're exposed to the general public. Signed-off-by: Jeff Dike Signed-off-by: Linus Torvalds diff --git a/arch/um/drivers/Makefile b/arch/um/drivers/Makefile index 783e18c..de17d4c 100644 --- a/arch/um/drivers/Makefile +++ b/arch/um/drivers/Makefile @@ -13,7 +13,7 @@ mcast-objs := mcast_kern.o mcast_user.o net-objs := net_kern.o net_user.o mconsole-objs := mconsole_kern.o mconsole_user.o hostaudio-objs := hostaudio_kern.o -ubd-objs := ubd_kern.o +ubd-objs := ubd_kern.o ubd_user.o port-objs := port_kern.o port_user.o harddog-objs := harddog_kern.o harddog_user.o diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index e77a38d..f731343 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -35,7 +35,6 @@ #include "linux/blkpg.h" #include "linux/genhd.h" #include "linux/spinlock.h" -#include "asm/atomic.h" #include "asm/segment.h" #include "asm/uaccess.h" #include "asm/irq.h" @@ -54,21 +53,20 @@ #include "mem.h" #include "mem_kern.h" #include "cow.h" -#include "aio.h" enum ubd_req { UBD_READ, UBD_WRITE }; struct io_thread_req { - enum aio_type op; + enum ubd_req op; int fds[2]; unsigned long offsets[2]; unsigned long long offset; unsigned long length; char *buffer; int sectorsize; - int bitmap_offset; - long bitmap_start; - long bitmap_end; + unsigned long sector_mask; + unsigned long long cow_offset; + unsigned long bitmap_words[2]; int error; }; @@ -82,31 +80,28 @@ extern int create_cow_file(char *cow_file, char *backing_file, unsigned long *bitmap_len_out, int *data_offset_out); extern int read_cow_bitmap(int fd, void *buf, int offset, int len); -extern void do_io(struct io_thread_req *req, struct request *r, - unsigned long *bitmap); +extern void do_io(struct io_thread_req *req); -static inline int ubd_test_bit(__u64 bit, void *data) +static inline int ubd_test_bit(__u64 bit, unsigned char *data) { - unsigned char *buffer = data; __u64 n; int bits, off; - bits = sizeof(buffer[0]) * 8; + bits = sizeof(data[0]) * 8; n = bit / bits; off = bit % bits; - return((buffer[n] & (1 << off)) != 0); + return((data[n] & (1 << off)) != 0); } -static inline void ubd_set_bit(__u64 bit, void *data) +static inline void ubd_set_bit(__u64 bit, unsigned char *data) { - unsigned char *buffer = data; __u64 n; int bits, off; - bits = sizeof(buffer[0]) * 8; + bits = sizeof(data[0]) * 8; n = bit / bits; off = bit % bits; - buffer[n] |= (1 << off); + data[n] |= (1 << off); } /*End stuff from ubd_user.h*/ @@ -115,6 +110,8 @@ static inline void ubd_set_bit(__u64 bit, void *data) static DEFINE_SPINLOCK(ubd_io_lock); static DEFINE_SPINLOCK(ubd_lock); +static void (*do_ubd)(void); + static int ubd_open(struct inode * inode, struct file * filp); static int ubd_release(struct inode * inode, struct file * file); static int ubd_ioctl(struct inode * inode, struct file * file, @@ -161,8 +158,6 @@ struct cow { int data_offset; }; -#define MAX_SG 64 - struct ubd { char *file; int count; @@ -173,7 +168,6 @@ struct ubd { int no_cow; struct cow cow; struct platform_device pdev; - struct scatterlist sg[MAX_SG]; }; #define DEFAULT_COW { \ @@ -466,114 +460,81 @@ __uml_help(fakehd, ); static void do_ubd_request(request_queue_t * q); -static int in_ubd; + +/* Only changed by ubd_init, which is an initcall. */ +int thread_fd = -1; /* Changed by ubd_handler, which is serialized because interrupts only * happen on CPU 0. */ int intr_count = 0; -static void ubd_end_request(struct request *req, int bytes, int uptodate) +/* call ubd_finish if you need to serialize */ +static void __ubd_finish(struct request *req, int error) { - if (!end_that_request_first(req, uptodate, bytes >> 9)) { - add_disk_randomness(req->rq_disk); - end_that_request_last(req); + int nsect; + + if(error){ + end_request(req, 0); + return; } + nsect = req->current_nr_sectors; + req->sector += nsect; + req->buffer += nsect << 9; + req->errors = 0; + req->nr_sectors -= nsect; + req->current_nr_sectors = 0; + end_request(req, 1); } -/* call ubd_finish if you need to serialize */ -static void __ubd_finish(struct request *req, int bytes) +static inline void ubd_finish(struct request *req, int error) { - if(bytes < 0){ - ubd_end_request(req, 0, 0); - return; - } - - ubd_end_request(req, bytes, 1); + spin_lock(&ubd_io_lock); + __ubd_finish(req, error); + spin_unlock(&ubd_io_lock); } -static inline void ubd_finish(struct request *req, int bytes) +/* Called without ubd_io_lock held */ +static void ubd_handler(void) { - spin_lock(&ubd_io_lock); - __ubd_finish(req, bytes); - spin_unlock(&ubd_io_lock); + struct io_thread_req req; + struct request *rq = elv_next_request(ubd_queue); + int n; + + do_ubd = NULL; + intr_count++; + n = os_read_file(thread_fd, &req, sizeof(req)); + if(n != sizeof(req)){ + printk(KERN_ERR "Pid %d - spurious interrupt in ubd_handler, " + "err = %d\n", os_getpid(), -n); + spin_lock(&ubd_io_lock); + end_request(rq, 0); + spin_unlock(&ubd_io_lock); + return; + } + + ubd_finish(rq, req.error); + reactivate_fd(thread_fd, UBD_IRQ); + do_ubd_request(ubd_queue); } -struct bitmap_io { - atomic_t count; - struct aio_context aio; -}; - -struct ubd_aio { - struct aio_context aio; - struct request *req; - int len; - struct bitmap_io *bitmap; - void *bitmap_buf; -}; - -static int ubd_reply_fd = -1; - static irqreturn_t ubd_intr(int irq, void *dev, struct pt_regs *unused) { - struct aio_thread_reply reply; - struct ubd_aio *aio; - struct request *req; - int err, n, fd = (int) (long) dev; - - while(1){ - err = os_read_file(fd, &reply, sizeof(reply)); - if(err == -EAGAIN) - break; - if(err < 0){ - printk("ubd_aio_handler - read returned err %d\n", - -err); - break; - } - - aio = container_of(reply.data, struct ubd_aio, aio); - n = reply.err; - - if(n == 0){ - req = aio->req; - req->nr_sectors -= aio->len >> 9; - - if((aio->bitmap != NULL) && - (atomic_dec_and_test(&aio->bitmap->count))){ - aio->aio = aio->bitmap->aio; - aio->len = 0; - kfree(aio->bitmap); - aio->bitmap = NULL; - submit_aio(&aio->aio); - } - else { - if((req->nr_sectors == 0) && - (aio->bitmap == NULL)){ - int len = req->hard_nr_sectors << 9; - ubd_finish(req, len); - } - - if(aio->bitmap_buf != NULL) - kfree(aio->bitmap_buf); - kfree(aio); - } - } - else if(n < 0){ - ubd_finish(aio->req, n); - if(aio->bitmap != NULL) - kfree(aio->bitmap); - if(aio->bitmap_buf != NULL) - kfree(aio->bitmap_buf); - kfree(aio); - } - } - reactivate_fd(fd, UBD_IRQ); + ubd_handler(); + return(IRQ_HANDLED); +} - do_ubd_request(ubd_queue); +/* Only changed by ubd_init, which is an initcall. */ +static int io_pid = -1; - return(IRQ_HANDLED); +void kill_io_thread(void) +{ + if(io_pid != -1) + os_kill_process(io_pid, 1); } +__uml_exitcall(kill_io_thread); + static int ubd_file_size(struct ubd *dev, __u64 *size_out) { char *file; @@ -608,7 +569,7 @@ static int ubd_open_dev(struct ubd *dev) &dev->cow.data_offset, create_ptr); if((dev->fd == -ENOENT) && create_cow){ - dev->fd = create_cow_file(dev->file, dev->cow.file, + dev->fd = create_cow_file(dev->file, dev->cow.file, dev->openflags, 1 << 9, PAGE_SIZE, &dev->cow.bitmap_offset, &dev->cow.bitmap_len, @@ -870,10 +831,6 @@ int ubd_init(void) { int i; - ubd_reply_fd = init_aio_irq(UBD_IRQ, "ubd", ubd_intr); - if(ubd_reply_fd < 0) - printk("Setting up ubd AIO failed, err = %d\n", ubd_reply_fd); - devfs_mk_dir("ubd"); if (register_blkdev(MAJOR_NR, "ubd")) return -1; @@ -884,7 +841,6 @@ int ubd_init(void) return -1; } - blk_queue_max_hw_segments(ubd_queue, MAX_SG); if (fake_major != MAJOR_NR) { char name[sizeof("ubd_nnn\0")]; @@ -896,12 +852,40 @@ int ubd_init(void) driver_register(&ubd_driver); for (i = 0; i < MAX_DEV; i++) ubd_add(i); - return 0; } late_initcall(ubd_init); +int ubd_driver_init(void){ + unsigned long stack; + int err; + + /* Set by CONFIG_BLK_DEV_UBD_SYNC or ubd=sync.*/ + if(global_openflags.s){ + printk(KERN_INFO "ubd: Synchronous mode\n"); + /* Letting ubd=sync be like using ubd#s= instead of ubd#= is + * enough. So use anyway the io thread. */ + } + stack = alloc_stack(0, 0); + io_pid = start_io_thread(stack + PAGE_SIZE - sizeof(void *), + &thread_fd); + if(io_pid < 0){ + printk(KERN_ERR + "ubd : Failed to start I/O thread (errno = %d) - " + "falling back to synchronous I/O\n", -io_pid); + io_pid = -1; + return(0); + } + err = um_request_irq(UBD_IRQ, thread_fd, IRQ_READ, ubd_intr, + SA_INTERRUPT, "ubd", ubd_dev); + if(err != 0) + printk(KERN_ERR "um_request_irq failed - errno = %d\n", -err); + return(err); +} + +device_initcall(ubd_driver_init); + static int ubd_open(struct inode *inode, struct file *filp) { struct gendisk *disk = inode->i_bdev->bd_disk; @@ -939,55 +923,105 @@ static int ubd_release(struct inode * inode, struct file * file) return(0); } -static void cowify_bitmap(struct io_thread_req *req, unsigned long *bitmap) +static void cowify_bitmap(__u64 io_offset, int length, unsigned long *cow_mask, + __u64 *cow_offset, unsigned long *bitmap, + __u64 bitmap_offset, unsigned long *bitmap_words, + __u64 bitmap_len) { - __u64 sector = req->offset / req->sectorsize; - int i; + __u64 sector = io_offset >> 9; + int i, update_bitmap = 0; + + for(i = 0; i < length >> 9; i++){ + if(cow_mask != NULL) + ubd_set_bit(i, (unsigned char *) cow_mask); + if(ubd_test_bit(sector + i, (unsigned char *) bitmap)) + continue; - for(i = 0; i < req->length / req->sectorsize; i++){ - if(ubd_test_bit(sector + i, bitmap)) - continue; + update_bitmap = 1; + ubd_set_bit(sector + i, (unsigned char *) bitmap); + } + + if(!update_bitmap) + return; - if(req->bitmap_start == -1) - req->bitmap_start = sector + i; - req->bitmap_end = sector + i + 1; + *cow_offset = sector / (sizeof(unsigned long) * 8); - ubd_set_bit(sector + i, bitmap); - } + /* This takes care of the case where we're exactly at the end of the + * device, and *cow_offset + 1 is off the end. So, just back it up + * by one word. Thanks to Lynn Kerby for the fix and James McMechan + * for the original diagnosis. + */ + if(*cow_offset == ((bitmap_len + sizeof(unsigned long) - 1) / + sizeof(unsigned long) - 1)) + (*cow_offset)--; + + bitmap_words[0] = bitmap[*cow_offset]; + bitmap_words[1] = bitmap[*cow_offset + 1]; + + *cow_offset *= sizeof(unsigned long); + *cow_offset += bitmap_offset; +} + +static void cowify_req(struct io_thread_req *req, unsigned long *bitmap, + __u64 bitmap_offset, __u64 bitmap_len) +{ + __u64 sector = req->offset >> 9; + int i; + + if(req->length > (sizeof(req->sector_mask) * 8) << 9) + panic("Operation too long"); + + if(req->op == UBD_READ) { + for(i = 0; i < req->length >> 9; i++){ + if(ubd_test_bit(sector + i, (unsigned char *) bitmap)) + ubd_set_bit(i, (unsigned char *) + &req->sector_mask); + } + } + else cowify_bitmap(req->offset, req->length, &req->sector_mask, + &req->cow_offset, bitmap, bitmap_offset, + req->bitmap_words, bitmap_len); } /* Called with ubd_io_lock held */ -static int prepare_request(struct request *req, struct io_thread_req *io_req, - unsigned long long offset, int page_offset, - int len, struct page *page) +static int prepare_request(struct request *req, struct io_thread_req *io_req) { struct gendisk *disk = req->rq_disk; struct ubd *dev = disk->private_data; + __u64 offset; + int len; + + if(req->rq_status == RQ_INACTIVE) return(1); /* This should be impossible now */ if((rq_data_dir(req) == WRITE) && !dev->openflags.w){ printk("Write attempted on readonly ubd device %s\n", disk->disk_name); - ubd_end_request(req, 0, 0); + end_request(req, 0); return(1); } + offset = ((__u64) req->sector) << 9; + len = req->current_nr_sectors << 9; + io_req->fds[0] = (dev->cow.file != NULL) ? dev->cow.fd : dev->fd; io_req->fds[1] = dev->fd; + io_req->cow_offset = -1; io_req->offset = offset; io_req->length = len; io_req->error = 0; - io_req->op = (rq_data_dir(req) == READ) ? AIO_READ : AIO_WRITE; + io_req->sector_mask = 0; + + io_req->op = (rq_data_dir(req) == READ) ? UBD_READ : UBD_WRITE; io_req->offsets[0] = 0; io_req->offsets[1] = dev->cow.data_offset; - io_req->buffer = page_address(page) + page_offset; + io_req->buffer = req->buffer; io_req->sectorsize = 1 << 9; - io_req->bitmap_offset = dev->cow.bitmap_offset; - io_req->bitmap_start = -1; - io_req->bitmap_end = -1; - if((dev->cow.file != NULL) && (io_req->op == UBD_WRITE)) - cowify_bitmap(io_req, dev->cow.bitmap); + if(dev->cow.file != NULL) + cowify_req(io_req, dev->cow.bitmap, dev->cow.bitmap_offset, + dev->cow.bitmap_len); + return(0); } @@ -996,36 +1030,30 @@ static void do_ubd_request(request_queue_t *q) { struct io_thread_req io_req; struct request *req; - __u64 sector; - int err; - - if(in_ubd) - return; - in_ubd = 1; - while((req = elv_next_request(q)) != NULL){ - struct gendisk *disk = req->rq_disk; - struct ubd *dev = disk->private_data; - int n, i; - - blkdev_dequeue_request(req); - - sector = req->sector; - n = blk_rq_map_sg(q, req, dev->sg); - - for(i = 0; i < n; i++){ - struct scatterlist *sg = &dev->sg[i]; - - err = prepare_request(req, &io_req, sector << 9, - sg->offset, sg->length, - sg->page); - if(err) - continue; - - sector += sg->length >> 9; - do_io(&io_req, req, dev->cow.bitmap); + int err, n; + + if(thread_fd == -1){ + while((req = elv_next_request(q)) != NULL){ + err = prepare_request(req, &io_req); + if(!err){ + do_io(&io_req); + __ubd_finish(req, io_req.error); + } + } + } + else { + if(do_ubd || (req = elv_next_request(q)) == NULL) + return; + err = prepare_request(req, &io_req); + if(!err){ + do_ubd = ubd_handler; + n = os_write_file(thread_fd, (char *) &io_req, + sizeof(io_req)); + if(n != sizeof(io_req)) + printk("write to io thread failed, " + "errno = %d\n", -n); } } - in_ubd = 0; } static int ubd_ioctl(struct inode * inode, struct file * file, @@ -1241,95 +1269,131 @@ int create_cow_file(char *cow_file, char *backing_file, struct openflags flags, return(err); } -void do_io(struct io_thread_req *req, struct request *r, unsigned long *bitmap) +static int update_bitmap(struct io_thread_req *req) { - struct ubd_aio *aio; - struct bitmap_io *bitmap_io = NULL; - char *buf; - void *bitmap_buf = NULL; - unsigned long len, sector; - int nsectors, start, end, bit, err; - __u64 off; - - if(req->bitmap_start != -1){ - /* Round up to the nearest word */ - int round = sizeof(unsigned long); - len = (req->bitmap_end - req->bitmap_start + - round * 8 - 1) / (round * 8); - len *= round; - - off = req->bitmap_start / (8 * round); - off *= round; - - bitmap_io = kmalloc(sizeof(*bitmap_io), GFP_KERNEL); - if(bitmap_io == NULL){ - printk("Failed to kmalloc bitmap IO\n"); - req->error = 1; - return; - } + int n; - bitmap_buf = kmalloc(len, GFP_KERNEL); - if(bitmap_buf == NULL){ - printk("do_io : kmalloc of bitmap chunk " - "failed\n"); - kfree(bitmap_io); - req->error = 1; - return; - } - memcpy(bitmap_buf, &bitmap[off / sizeof(bitmap[0])], len); - - *bitmap_io = ((struct bitmap_io) - { .count = ATOMIC_INIT(0), - .aio = INIT_AIO(AIO_WRITE, req->fds[1], - bitmap_buf, len, - req->bitmap_offset + off, - ubd_reply_fd) } ); - } + if(req->cow_offset == -1) + return(0); - nsectors = req->length / req->sectorsize; - start = 0; - end = nsectors; - bit = 0; - do { - if(bitmap != NULL){ - sector = req->offset / req->sectorsize; - bit = ubd_test_bit(sector + start, bitmap); - end = start; - while((end < nsectors) && - (ubd_test_bit(sector + end, bitmap) == bit)) - end++; - } + n = os_seek_file(req->fds[1], req->cow_offset); + if(n < 0){ + printk("do_io - bitmap lseek failed : err = %d\n", -n); + return(1); + } - off = req->offsets[bit] + req->offset + - start * req->sectorsize; - len = (end - start) * req->sectorsize; - buf = &req->buffer[start * req->sectorsize]; + n = os_write_file(req->fds[1], &req->bitmap_words, + sizeof(req->bitmap_words)); + if(n != sizeof(req->bitmap_words)){ + printk("do_io - bitmap update failed, err = %d fd = %d\n", -n, + req->fds[1]); + return(1); + } - aio = kmalloc(sizeof(*aio), GFP_KERNEL); - if(aio == NULL){ - req->error = 1; - return; - } + return(0); +} - *aio = ((struct ubd_aio) - { .aio = INIT_AIO(req->op, req->fds[bit], buf, - len, off, ubd_reply_fd), - .len = len, - .req = r, - .bitmap = bitmap_io, - .bitmap_buf = bitmap_buf }); - - if(aio->bitmap != NULL) - atomic_inc(&aio->bitmap->count); - - err = submit_aio(&aio->aio); - if(err){ - printk("do_io - submit_aio failed, " - "err = %d\n", err); - req->error = 1; - return; - } +void do_io(struct io_thread_req *req) +{ + char *buf; + unsigned long len; + int n, nsectors, start, end, bit; + int err; + __u64 off; + + nsectors = req->length / req->sectorsize; + start = 0; + do { + bit = ubd_test_bit(start, (unsigned char *) &req->sector_mask); + end = start; + while((end < nsectors) && + (ubd_test_bit(end, (unsigned char *) + &req->sector_mask) == bit)) + end++; + + off = req->offset + req->offsets[bit] + + start * req->sectorsize; + len = (end - start) * req->sectorsize; + buf = &req->buffer[start * req->sectorsize]; + + err = os_seek_file(req->fds[bit], off); + if(err < 0){ + printk("do_io - lseek failed : err = %d\n", -err); + req->error = 1; + return; + } + if(req->op == UBD_READ){ + n = 0; + do { + buf = &buf[n]; + len -= n; + n = os_read_file(req->fds[bit], buf, len); + if (n < 0) { + printk("do_io - read failed, err = %d " + "fd = %d\n", -n, req->fds[bit]); + req->error = 1; + return; + } + } while((n < len) && (n != 0)); + if (n < len) memset(&buf[n], 0, len - n); + } else { + n = os_write_file(req->fds[bit], buf, len); + if(n != len){ + printk("do_io - write failed err = %d " + "fd = %d\n", -n, req->fds[bit]); + req->error = 1; + return; + } + } + + start = end; + } while(start < nsectors); - start = end; - } while(start < nsectors); + req->error = update_bitmap(req); } + +/* Changed in start_io_thread, which is serialized by being called only + * from ubd_init, which is an initcall. + */ +int kernel_fd = -1; + +/* Only changed by the io thread */ +int io_count = 0; + +int io_thread(void *arg) +{ + struct io_thread_req req; + int n; + + ignore_sigwinch_sig(); + while(1){ + n = os_read_file(kernel_fd, &req, sizeof(req)); + if(n != sizeof(req)){ + if(n < 0) + printk("io_thread - read failed, fd = %d, " + "err = %d\n", kernel_fd, -n); + else { + printk("io_thread - short read, fd = %d, " + "length = %d\n", kernel_fd, n); + } + continue; + } + io_count++; + do_io(&req); + n = os_write_file(kernel_fd, &req, sizeof(req)); + if(n != sizeof(req)) + printk("io_thread - write failed, fd = %d, err = %d\n", + kernel_fd, -n); + } +} + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/ubd_user.c b/arch/um/drivers/ubd_user.c new file mode 100644 index 0000000..b94d2bc4f --- /dev/null +++ b/arch/um/drivers/ubd_user.c @@ -0,0 +1,75 @@ +/* + * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com) + * Copyright (C) 2001 Ridgerun,Inc (glonnon@ridgerun.com) + * Licensed under the GPL + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "asm/types.h" +#include "user_util.h" +#include "kern_util.h" +#include "user.h" +#include "ubd_user.h" +#include "os.h" +#include "cow.h" + +#include +#include + +void ignore_sigwinch_sig(void) +{ + signal(SIGWINCH, SIG_IGN); +} + +int start_io_thread(unsigned long sp, int *fd_out) +{ + int pid, fds[2], err; + + err = os_pipe(fds, 1, 1); + if(err < 0){ + printk("start_io_thread - os_pipe failed, err = %d\n", -err); + goto out; + } + + kernel_fd = fds[0]; + *fd_out = fds[1]; + + pid = clone(io_thread, (void *) sp, CLONE_FILES | CLONE_VM | SIGCHLD, + NULL); + if(pid < 0){ + printk("start_io_thread - clone failed : errno = %d\n", errno); + err = -errno; + goto out_close; + } + + return(pid); + + out_close: + os_close_file(fds[0]); + os_close_file(fds[1]); + kernel_fd = -1; + *fd_out = -1; + out: + return(err); +} + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/include/aio.h b/arch/um/include/aio.h index 83f1687..423bae9 100644 --- a/arch/um/include/aio.h +++ b/arch/um/include/aio.h @@ -14,27 +14,15 @@ struct aio_thread_reply { }; struct aio_context { - enum aio_type type; - int fd; - void *data; - int len; - unsigned long long offset; int reply_fd; struct aio_context *next; }; -#define INIT_AIO(aio_type, aio_fd, aio_data, aio_len, aio_offset, \ - aio_reply_fd) \ - { .type = aio_type, \ - .fd = aio_fd, \ - .data = aio_data, \ - .len = aio_len, \ - .offset = aio_offset, \ - .reply_fd = aio_reply_fd } - #define INIT_AIO_CONTEXT { .reply_fd = -1, \ .next = NULL } -extern int submit_aio(struct aio_context *aio); +extern int submit_aio(enum aio_type type, int fd, char *buf, int len, + unsigned long long offset, int reply_fd, + struct aio_context *aio); #endif diff --git a/arch/um/os-Linux/aio.c b/arch/um/os-Linux/aio.c index f6e6402..41cfb09 100644 --- a/arch/um/os-Linux/aio.c +++ b/arch/um/os-Linux/aio.c @@ -6,7 +6,6 @@ #include #include #include -#include #include #include #include @@ -17,31 +16,18 @@ #include "user.h" #include "mode.h" +struct aio_thread_req { + enum aio_type type; + int io_fd; + unsigned long long offset; + char *buf; + int len; + struct aio_context *aio; +}; + static int aio_req_fd_r = -1; static int aio_req_fd_w = -1; -static int update_aio(struct aio_context *aio, int res) -{ - if(res < 0) - aio->len = res; - else if((res == 0) && (aio->type == AIO_READ)){ - /* This is the EOF case - we have hit the end of the file - * and it ends in a partial block, so we fill the end of - * the block with zeros and claim success. - */ - memset(aio->data, 0, aio->len); - aio->len = 0; - } - else if(res > 0){ - aio->len -= res; - aio->data += res; - aio->offset += res; - return aio->len; - } - - return 0; -} - #if defined(HAVE_AIO_ABI) #include @@ -80,7 +66,8 @@ static long io_getevents(aio_context_t ctx_id, long min_nr, long nr, * that it now backs the mmapped area. */ -static int do_aio(aio_context_t ctx, struct aio_context *aio) +static int do_aio(aio_context_t ctx, enum aio_type type, int fd, char *buf, + int len, unsigned long long offset, struct aio_context *aio) { struct iocb iocb, *iocbp = &iocb; char c; @@ -88,39 +75,40 @@ static int do_aio(aio_context_t ctx, struct aio_context *aio) iocb = ((struct iocb) { .aio_data = (unsigned long) aio, .aio_reqprio = 0, - .aio_fildes = aio->fd, - .aio_buf = (unsigned long) aio->data, - .aio_nbytes = aio->len, - .aio_offset = aio->offset, + .aio_fildes = fd, + .aio_buf = (unsigned long) buf, + .aio_nbytes = len, + .aio_offset = offset, .aio_reserved1 = 0, .aio_reserved2 = 0, .aio_reserved3 = 0 }); - switch(aio->type){ + switch(type){ case AIO_READ: iocb.aio_lio_opcode = IOCB_CMD_PREAD; + err = io_submit(ctx, 1, &iocbp); break; case AIO_WRITE: iocb.aio_lio_opcode = IOCB_CMD_PWRITE; + err = io_submit(ctx, 1, &iocbp); break; case AIO_MMAP: iocb.aio_lio_opcode = IOCB_CMD_PREAD; iocb.aio_buf = (unsigned long) &c; iocb.aio_nbytes = sizeof(c); + err = io_submit(ctx, 1, &iocbp); break; default: - printk("Bogus op in do_aio - %d\n", aio->type); + printk("Bogus op in do_aio - %d\n", type); err = -EINVAL; - goto out; + break; } - err = io_submit(ctx, 1, &iocbp); if(err > 0) err = 0; else err = -errno; - out: return err; } @@ -129,9 +117,8 @@ static aio_context_t ctx = 0; static int aio_thread(void *arg) { struct aio_thread_reply reply; - struct aio_context *aio; struct io_event event; - int err, n; + int err, n, reply_fd; signal(SIGWINCH, SIG_IGN); @@ -144,22 +131,14 @@ static int aio_thread(void *arg) "errno = %d\n", errno); } else { - /* This is safe as we've just a pointer here. */ - aio = (struct aio_context *) (long) event.data; - if(update_aio(aio, event.res)){ - do_aio(ctx, aio); - continue; - } - reply = ((struct aio_thread_reply) - { .data = aio, - .err = aio->len }); - err = os_write_file(aio->reply_fd, &reply, - sizeof(reply)); + { .data = (void *) (long) event.data, + .err = event.res }); + reply_fd = ((struct aio_context *) reply.data)->reply_fd; + err = os_write_file(reply_fd, &reply, sizeof(reply)); if(err != sizeof(reply)) - printk("aio_thread - write failed, " - "fd = %d, err = %d\n", aio->reply_fd, - -err); + printk("aio_thread - write failed, fd = %d, " + "err = %d\n", aio_req_fd_r, -err); } } return 0; @@ -167,35 +146,35 @@ static int aio_thread(void *arg) #endif -static int do_not_aio(struct aio_context *aio) +static int do_not_aio(struct aio_thread_req *req) { char c; int err; - switch(aio->type){ + switch(req->type){ case AIO_READ: - err = os_seek_file(aio->fd, aio->offset); + err = os_seek_file(req->io_fd, req->offset); if(err) goto out; - err = os_read_file(aio->fd, aio->data, aio->len); + err = os_read_file(req->io_fd, req->buf, req->len); break; case AIO_WRITE: - err = os_seek_file(aio->fd, aio->offset); + err = os_seek_file(req->io_fd, req->offset); if(err) goto out; - err = os_write_file(aio->fd, aio->data, aio->len); + err = os_write_file(req->io_fd, req->buf, req->len); break; case AIO_MMAP: - err = os_seek_file(aio->fd, aio->offset); + err = os_seek_file(req->io_fd, req->offset); if(err) goto out; - err = os_read_file(aio->fd, &c, sizeof(c)); + err = os_read_file(req->io_fd, &c, sizeof(c)); break; default: - printk("do_not_aio - bad request type : %d\n", aio->type); + printk("do_not_aio - bad request type : %d\n", req->type); err = -EINVAL; break; } @@ -206,14 +185,14 @@ static int do_not_aio(struct aio_context *aio) static int not_aio_thread(void *arg) { - struct aio_context *aio; + struct aio_thread_req req; struct aio_thread_reply reply; int err; signal(SIGWINCH, SIG_IGN); while(1){ - err = os_read_file(aio_req_fd_r, &aio, sizeof(aio)); - if(err != sizeof(aio)){ + err = os_read_file(aio_req_fd_r, &req, sizeof(req)); + if(err != sizeof(req)){ if(err < 0) printk("not_aio_thread - read failed, " "fd = %d, err = %d\n", aio_req_fd_r, @@ -224,34 +203,17 @@ static int not_aio_thread(void *arg) } continue; } - again: - err = do_not_aio(aio); - - if(update_aio(aio, err)) - goto again; - - reply = ((struct aio_thread_reply) { .data = aio, - .err = aio->len }); - err = os_write_file(aio->reply_fd, &reply, sizeof(reply)); + err = do_not_aio(&req); + reply = ((struct aio_thread_reply) { .data = req.aio, + .err = err }); + err = os_write_file(req.aio->reply_fd, &reply, sizeof(reply)); if(err != sizeof(reply)) printk("not_aio_thread - write failed, fd = %d, " "err = %d\n", aio_req_fd_r, -err); } } -static int submit_aio_24(struct aio_context *aio) -{ - int err; - - err = os_write_file(aio_req_fd_w, &aio, sizeof(aio)); - if(err == sizeof(aio)) - err = 0; - - return err; -} - static int aio_pid = -1; -static int (*submit_proc)(struct aio_context *aio); static int init_aio_24(void) { @@ -283,33 +245,11 @@ static int init_aio_24(void) #endif printk("2.6 host AIO support not used - falling back to I/O " "thread\n"); - - submit_proc = submit_aio_24; - return 0; } #ifdef HAVE_AIO_ABI #define DEFAULT_24_AIO 0 -static int submit_aio_26(struct aio_context *aio) -{ - struct aio_thread_reply reply; - int err; - - err = do_aio(ctx, aio); - if(err){ - reply = ((struct aio_thread_reply) { .data = aio, - .err = err }); - err = os_write_file(aio->reply_fd, &reply, sizeof(reply)); - if(err != sizeof(reply)) - printk("submit_aio_26 - write failed, " - "fd = %d, err = %d\n", aio->reply_fd, -err); - else err = 0; - } - - return err; -} - static int init_aio_26(void) { unsigned long stack; @@ -330,22 +270,39 @@ static int init_aio_26(void) aio_pid = err; printk("Using 2.6 host AIO\n"); + return 0; +} + +static int submit_aio_26(enum aio_type type, int io_fd, char *buf, int len, + unsigned long long offset, struct aio_context *aio) +{ + struct aio_thread_reply reply; + int err; - submit_proc = submit_aio_26; + err = do_aio(ctx, type, io_fd, buf, len, offset, aio); + if(err){ + reply = ((struct aio_thread_reply) { .data = aio, + .err = err }); + err = os_write_file(aio->reply_fd, &reply, sizeof(reply)); + if(err != sizeof(reply)) + printk("submit_aio_26 - write failed, " + "fd = %d, err = %d\n", aio->reply_fd, -err); + else err = 0; + } - return 0; + return err; } #else #define DEFAULT_24_AIO 1 -static int submit_aio_26(struct aio_context *aio) +static int init_aio_26(void) { return -ENOSYS; } -static int init_aio_26(void) +static int submit_aio_26(enum aio_type type, int io_fd, char *buf, int len, + unsigned long long offset, struct aio_context *aio) { - submit_proc = submit_aio_26; return -ENOSYS; } #endif @@ -412,7 +369,33 @@ static void exit_aio(void) __uml_exitcall(exit_aio); -int submit_aio(struct aio_context *aio) +static int submit_aio_24(enum aio_type type, int io_fd, char *buf, int len, + unsigned long long offset, struct aio_context *aio) { - return (*submit_proc)(aio); + struct aio_thread_req req = { .type = type, + .io_fd = io_fd, + .offset = offset, + .buf = buf, + .len = len, + .aio = aio, + }; + int err; + + err = os_write_file(aio_req_fd_w, &req, sizeof(req)); + if(err == sizeof(req)) + err = 0; + + return err; +} + +int submit_aio(enum aio_type type, int io_fd, char *buf, int len, + unsigned long long offset, int reply_fd, + struct aio_context *aio) +{ + aio->reply_fd = reply_fd; + if(aio_24) + return submit_aio_24(type, io_fd, buf, len, offset, aio); + else { + return submit_aio_26(type, io_fd, buf, len, offset, aio); + } } -- cgit v0.10.2 From 9d624ea474a3ddf3a0702d9b47e428ce1f8488a6 Mon Sep 17 00:00:00 2001 From: Paolo 'Blaisorblade' Giarrusso Date: Tue, 11 Oct 2005 21:01:01 +0200 Subject: [PATCH] uml: compile-time fix recent patch Give an empty definition for clear_can_do_skas() when it is not needed. Thanks to Junichi Uekawa for reporting the breakage and providing a fix (I re-fixed it in an IMHO cleaner way). Signed-off-by: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Linus Torvalds diff --git a/arch/um/include/os.h b/arch/um/include/os.h index 6f766e1..2e58e30 100644 --- a/arch/um/include/os.h +++ b/arch/um/include/os.h @@ -6,6 +6,7 @@ #ifndef __OS_H__ #define __OS_H__ +#include "uml-config.h" #include "asm/types.h" #include "../os/include/file.h" @@ -159,7 +160,11 @@ extern int can_do_skas(void); /* Make sure they are clear when running in TT mode. Required by * SEGV_MAYBE_FIXABLE */ +#ifdef UML_CONFIG_MODE_SKAS #define clear_can_do_skas() do { ptrace_faultinfo = proc_mm = 0; } while (0) +#else +#define clear_can_do_skas() do {} while (0) +#endif /* mem.c */ extern int create_mem_file(unsigned long len); -- cgit v0.10.2 From cbd27b8ced4b1888c93f69b4dd108a69ac4d733f Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 12 Oct 2005 11:39:33 +1000 Subject: [PATCH] ppc32: Fix timekeeping Interestingly enough, ppc32 had broken timekeeping for ages... It worked, but probably drifted a bit more than could be explained by the actual bad precision of the timebase calibration. We discovered that recently when somebody figured out that the common code was using CLOCK_TICK_RATE to correct the timekeeing, and ppc32 had a completely bogus value for it. This patch turns it into something saner. Probably not as good as doing something based on the actual timebase frequency precision but I'll leave that sort of math to others. This at least makes it better for the common HZ values. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Linus Torvalds diff --git a/include/asm-powerpc/timex.h b/include/asm-powerpc/timex.h index 51c5b31..c02d15a 100644 --- a/include/asm-powerpc/timex.h +++ b/include/asm-powerpc/timex.h @@ -10,7 +10,7 @@ #include #include -#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */ +#define CLOCK_TICK_RATE 1024000 /* Underlying HZ */ typedef unsigned long cycles_t; -- cgit v0.10.2 From d8e998c58a870770905495a1d45ebf7285b5b1c5 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 12 Oct 2005 14:22:50 +1000 Subject: [PATCH] ppc32: Tell userland about lack of standard TB Glibc is about to get some new high precision timer stuff that relies on the standard timebase of the PPC architecture. However, some (rare & old) CPUs do not have such timebase and it is a bit annoying to have your stuff just crash because you are running on the wrong CPU... This exposes to userland a CPU feature bit that tells that the current processor doesn't have a standard timebase. It's negative logic so that glibc will still "just work" on older kernels (it will just be unhappy on those old CPUs but that doesn't really matter as distro tend to update glibc & kernel at the same time). Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Linus Torvalds diff --git a/arch/ppc/kernel/cputable.c b/arch/ppc/kernel/cputable.c index 546e1ea..6b76cf5 100644 --- a/arch/ppc/kernel/cputable.c +++ b/arch/ppc/kernel/cputable.c @@ -91,7 +91,7 @@ struct cpu_spec cpu_specs[] = { .cpu_features = CPU_FTR_COMMON | CPU_FTR_601 | CPU_FTR_HPTE_TABLE, .cpu_user_features = COMMON_PPC | PPC_FEATURE_601_INSTR | - PPC_FEATURE_UNIFIED_CACHE, + PPC_FEATURE_UNIFIED_CACHE | PPC_FEATURE_NO_TB, .icache_bsize = 32, .dcache_bsize = 32, .cpu_setup = __setup_cpu_601 @@ -745,7 +745,8 @@ struct cpu_spec cpu_specs[] = { .cpu_name = "403GCX", .cpu_features = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB, - .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_NO_TB, .icache_bsize = 16, .dcache_bsize = 16, }, diff --git a/include/asm-ppc/cputable.h b/include/asm-ppc/cputable.h index 41d8f84..e17c492 100644 --- a/include/asm-ppc/cputable.h +++ b/include/asm-ppc/cputable.h @@ -24,6 +24,7 @@ #define PPC_FEATURE_HAS_SPE 0x00800000 #define PPC_FEATURE_HAS_EFP_SINGLE 0x00400000 #define PPC_FEATURE_HAS_EFP_DOUBLE 0x00200000 +#define PPC_FEATURE_NO_TB 0x00100000 #ifdef __KERNEL__ -- cgit v0.10.2 From 60ac133aac9e07b94f2cb6bf571bf8aef69248c3 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Wed, 12 Oct 2005 19:51:24 +0100 Subject: [ARM] 2974/1: fix ARM710 swi bug workaround Patch from Nicolas Pitre Either no one is using an ARM710 with recent kernels, or all ARM710s still in use are not afflicted by this swi bug. Nevertheless, the code to work around the ARM710 swi bug is itself currently buggy since it uses r8 as a pointer to S_PC while in fact it holds the spsr content these days. Fix that, and simplify the code as well. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 81d450a..066597f 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -106,15 +106,10 @@ ENTRY(ret_from_fork) .endm .Larm700bug: - ldr r0, [sp, #S_PSR] @ Get calling cpsr - sub lr, lr, #4 - str lr, [r8] - msr spsr_cxsf, r0 ldmia sp, {r0 - lr}^ @ Get calling r0 - lr mov r0, r0 - ldr lr, [sp, #S_PC] @ Get PC add sp, sp, #S_FRAME_SIZE - movs pc, lr + subs pc, lr, #4 #else .macro arm710_bug_check, instr, temp .endm -- cgit v0.10.2 From 0eea3c0b6cb356bc8e515084f831cac7e3d5131c Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 12 Oct 2005 19:58:05 +0100 Subject: [ARM] 2975/1: S3C2410: time.c missing include of cpu.h Patch from Ben Dooks arch/arm/mach-s3c2410/time.c is missing include of cpu.h, causing the declaration of the timer struct (s3c24xx_timer) to be flagged as missing the declaration. Signed-off-by: Ben Dooks Signed-off-by: Russell King diff --git a/arch/arm/mach-s3c2410/time.c b/arch/arm/mach-s3c2410/time.c index c0acfb2..8a00e3c 100644 --- a/arch/arm/mach-s3c2410/time.c +++ b/arch/arm/mach-s3c2410/time.c @@ -38,6 +38,7 @@ #include #include "clock.h" +#include "cpu.h" static unsigned long timer_startval; static unsigned long timer_usec_ticks; -- cgit v0.10.2 From 17efa644f624a521e4a6c6a4641d39d227a9b24a Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 12 Oct 2005 19:58:06 +0100 Subject: [ARM] 2976/1: S3C2410: add static to functions in serial driver Patch from Ben Dooks The s3c2410 serial driver is missing static declerations on several functions that are not exported, and have no need of being exported outside the driver Signed-off-by: Ben Dooks Signed-off-by: Russell King diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c index eff2158..52692aa 100644 --- a/drivers/serial/s3c2410.c +++ b/drivers/serial/s3c2410.c @@ -1092,8 +1092,8 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, static int probe_index = 0; -int s3c24xx_serial_probe(struct device *_dev, - struct s3c24xx_uart_info *info) +static int s3c24xx_serial_probe(struct device *_dev, + struct s3c24xx_uart_info *info) { struct s3c24xx_uart_port *ourport; struct platform_device *dev = to_platform_device(_dev); @@ -1120,7 +1120,7 @@ int s3c24xx_serial_probe(struct device *_dev, return ret; } -int s3c24xx_serial_remove(struct device *_dev) +static int s3c24xx_serial_remove(struct device *_dev) { struct uart_port *port = s3c24xx_dev_to_port(_dev); @@ -1134,7 +1134,8 @@ int s3c24xx_serial_remove(struct device *_dev) #ifdef CONFIG_PM -int s3c24xx_serial_suspend(struct device *dev, pm_message_t state, u32 level) +static int s3c24xx_serial_suspend(struct device *dev, pm_message_t state, + u32 level) { struct uart_port *port = s3c24xx_dev_to_port(dev); @@ -1144,7 +1145,7 @@ int s3c24xx_serial_suspend(struct device *dev, pm_message_t state, u32 level) return 0; } -int s3c24xx_serial_resume(struct device *dev, u32 level) +static int s3c24xx_serial_resume(struct device *dev, u32 level) { struct uart_port *port = s3c24xx_dev_to_port(dev); struct s3c24xx_uart_port *ourport = to_ourport(port); @@ -1165,8 +1166,8 @@ int s3c24xx_serial_resume(struct device *dev, u32 level) #define s3c24xx_serial_resume NULL #endif -int s3c24xx_serial_init(struct device_driver *drv, - struct s3c24xx_uart_info *info) +static int s3c24xx_serial_init(struct device_driver *drv, + struct s3c24xx_uart_info *info) { dbg("s3c24xx_serial_init(%p,%p)\n", drv, info); return driver_register(drv); -- cgit v0.10.2 From a7b1bbbc89194deba8cde02200f08b3840c9daa2 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 12 Oct 2005 19:58:07 +0100 Subject: [ARM] 2977/1: armksyms.c - make items in export table static Patch from Ben Dooks The items in the export table do not need to be exported elsehwere, so quash the sparse warning by making the symbol for the table entry static. Signed-off-by: Ben Dooks Signed-off-by: Russell King diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 835d450..7b17a87 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -45,8 +45,8 @@ extern void fp_enter(void); #define EXPORT_SYMBOL_ALIAS(sym,orig) \ EXPORT_CRC_ALIAS(sym) \ - const struct kernel_symbol __ksymtab_##sym \ - __attribute__((section("__ksymtab"))) = \ + static const struct kernel_symbol __ksymtab_##sym \ + __attribute_used__ __attribute__((section("__ksymtab"))) = \ { (unsigned long)&orig, #sym }; /* -- cgit v0.10.2 From 9f693d7b149a74bac301ee47136359294cffed25 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 12 Oct 2005 19:58:07 +0100 Subject: [ARM] 2979/2: S3C2410 - add static to non-exported machine items Patch from Ben Dooks Do not export items that are not needed by symbol name elsewhere Signed-off-by: Ben Dooks Signed-off-by: Russell King diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2410/mach-anubis.c index 7c05f27..5ae80f4 100644 --- a/arch/arm/mach-s3c2410/mach-anubis.c +++ b/arch/arm/mach-s3c2410/mach-anubis.c @@ -125,7 +125,7 @@ static int external_map[] = { 2 }; static int chip0_map[] = { 0 }; static int chip1_map[] = { 1 }; -struct mtd_partition anubis_default_nand_part[] = { +static struct mtd_partition anubis_default_nand_part[] = { [0] = { .name = "Boot Agent", .size = SZ_16K, diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index ed1f07d..8ca9559 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -230,7 +230,7 @@ static int chip0_map[] = { 1 }; static int chip1_map[] = { 2 }; static int chip2_map[] = { 3 }; -struct mtd_partition bast_default_nand_part[] = { +static struct mtd_partition bast_default_nand_part[] = { [0] = { .name = "Boot Agent", .size = SZ_16K, @@ -340,7 +340,7 @@ static struct resource bast_dm9k_resource[] = { * better IO routines can be written and tested */ -struct dm9000_plat_data bast_dm9k_platdata = { +static struct dm9000_plat_data bast_dm9k_platdata = { .flags = DM9000_PLATF_16BITONLY }; diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 663a7f9..46b2596 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -288,7 +288,7 @@ static struct resource vr1000_dm9k1_resource[] = { * better IO routines can be written and tested */ -struct dm9000_plat_data vr1000_dm9k_platdata = { +static struct dm9000_plat_data vr1000_dm9k_platdata = { .flags = DM9000_PLATF_16BITONLY, }; -- cgit v0.10.2 From ceca629e0b4858d6b8bff260dab2e947d31aca56 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 12 Oct 2005 19:58:08 +0100 Subject: [ARM] 2971/1: i.MX uart handle rts irq Patch from Sascha Hauer handle rts interrupt Signed-off-by: Giancarlo Formicuccia Signed-off-by: Sascha Hauer diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 53e0323..bdb4e45 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -73,7 +73,7 @@ struct imx_port { struct uart_port port; struct timer_list timer; unsigned int old_status; - int txirq,rxirq; + int txirq,rxirq,rtsirq; }; /* @@ -181,6 +181,22 @@ static void imx_start_tx(struct uart_port *port) imx_transmit_buffer(sport); } +static irqreturn_t imx_rtsint(int irq, void *dev_id, struct pt_regs *regs) +{ + struct imx_port *sport = (struct imx_port *)dev_id; + unsigned int val = USR1((u32)sport->port.membase)&USR1_RTSS; + unsigned long flags; + + spin_lock_irqsave(&sport->port.lock, flags); + + USR1((u32)sport->port.membase) = USR1_RTSD; + uart_handle_cts_change(&sport->port, !!val); + wake_up_interruptible(&sport->port.info->delta_msr_wait); + + spin_unlock_irqrestore(&sport->port.lock, flags); + return IRQ_HANDLED; +} + static irqreturn_t imx_txint(int irq, void *dev_id, struct pt_regs *regs) { struct imx_port *sport = (struct imx_port *)dev_id; @@ -386,15 +402,21 @@ static int imx_startup(struct uart_port *port) if (retval) goto error_out1; retval = request_irq(sport->txirq, imx_txint, 0, - "imx-uart", sport); + DRIVER_NAME, sport); if (retval) goto error_out2; + retval = request_irq(sport->rtsirq, imx_rtsint, 0, + DRIVER_NAME, sport); + if (retval) goto error_out3; + set_irq_type(sport->rtsirq, IRQT_BOTHEDGE); + /* * Finally, clear and enable interrupts */ + USR1((u32)sport->port.membase) = USR1_RTSD; UCR1((u32)sport->port.membase) |= - (UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_UARTEN); + (UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN); UCR2((u32)sport->port.membase) |= (UCR2_RXEN | UCR2_TXEN); /* @@ -406,6 +428,8 @@ static int imx_startup(struct uart_port *port) return 0; +error_out3: + free_irq(sport->txirq, sport); error_out2: free_irq(sport->rxirq, sport); error_out1: @@ -424,6 +448,7 @@ static void imx_shutdown(struct uart_port *port) /* * Free the interrupts */ + free_irq(sport->rtsirq, sport); free_irq(sport->txirq, sport); free_irq(sport->rxirq, sport); @@ -432,7 +457,7 @@ static void imx_shutdown(struct uart_port *port) */ UCR1((u32)sport->port.membase) &= - ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_UARTEN); + ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN); } static void @@ -522,7 +547,7 @@ imx_set_termios(struct uart_port *port, struct termios *termios, * disable interrupts and drain transmitter */ old_ucr1 = UCR1((u32)sport->port.membase); - UCR1((u32)sport->port.membase) &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN); + UCR1((u32)sport->port.membase) &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN); while ( !(USR2((u32)sport->port.membase) & USR2_TXDC)) barrier(); @@ -643,6 +668,7 @@ static struct imx_port imx_ports[] = { { .txirq = UART1_MINT_TX, .rxirq = UART1_MINT_RX, + .rtsirq = UART1_MINT_RTS, .port = { .type = PORT_IMX, .iotype = SERIAL_IO_MEM, @@ -658,6 +684,7 @@ static struct imx_port imx_ports[] = { }, { .txirq = UART2_MINT_TX, .rxirq = UART2_MINT_RX, + .rtsirq = UART2_MINT_RTS, .port = { .type = PORT_IMX, .iotype = SERIAL_IO_MEM, @@ -737,7 +764,7 @@ imx_console_write(struct console *co, const char *s, unsigned int count) UCR1((u32)sport->port.membase) = (old_ucr1 | UCR1_UARTCLKEN | UCR1_UARTEN) - & ~(UCR1_TXMPTYEN | UCR1_RRDYEN); + & ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN); UCR2((u32)sport->port.membase) = old_ucr2 | UCR2_TXEN; /* -- cgit v0.10.2 From cd26f45bfca4d4fa5ddfe21613d2da46f1acb821 Mon Sep 17 00:00:00 2001 From: "George G. Davis" Date: Wed, 12 Oct 2005 19:58:09 +0100 Subject: [ARM] 2970/1: Use -mtune=arm1136j-s when building for CPU_V6 targets Patch from George G. Davis When building for CPU_V6 targets, we should use -mtune=arm1136j-s rather than -mtune=strongarm but fall back to the later in case someone is using an older toolchain (although they should really upgrade instead). Signed-off-by: George G. Davis Signed-off-by: Russell King diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 7779f2d..299bc04 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -53,7 +53,7 @@ tune-$(CONFIG_CPU_ARM926T) :=-mtune=arm9tdmi tune-$(CONFIG_CPU_SA110) :=-mtune=strongarm110 tune-$(CONFIG_CPU_SA1100) :=-mtune=strongarm1100 tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale -tune-$(CONFIG_CPU_V6) :=-mtune=strongarm +tune-$(CONFIG_CPU_V6) :=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm) # Need -Uarm for gcc < 3.x CFLAGS_ABI :=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,) -- cgit v0.10.2 From 737d0bb7701cdebb661e4db0236071a7df977777 Mon Sep 17 00:00:00 2001 From: "George G. Davis" Date: Wed, 12 Oct 2005 19:58:10 +0100 Subject: [ARM] 2969/1: miscellaneous whitespace cleanup Patch from George G. Davis Fix leading, trailing and other miscellaneous whitespace issues in arch/arm/kernel/alignment.c. Signed-off-by: George G. Davis Signed-off-by: Russell King diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index f35e69e..705c989 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -111,7 +111,7 @@ proc_alignment_read(char *page, char **start, off_t off, int count, int *eof, } static int proc_alignment_write(struct file *file, const char __user *buffer, - unsigned long count, void *data) + unsigned long count, void *data) { char mode; @@ -119,7 +119,7 @@ static int proc_alignment_write(struct file *file, const char __user *buffer, if (get_user(mode, buffer)) return -EFAULT; if (mode >= '0' && mode <= '5') - ai_usermode = mode - '0'; + ai_usermode = mode - '0'; } return count; } @@ -262,7 +262,7 @@ union offset_union { goto fault; \ } while (0) -#define put32_unaligned_check(val,addr) \ +#define put32_unaligned_check(val,addr) \ __put32_unaligned_check("strb", val, addr) #define put32t_unaligned_check(val,addr) \ @@ -306,19 +306,19 @@ do_alignment_ldrhstrh(unsigned long addr, unsigned long instr, struct pt_regs *r return TYPE_LDST; user: - if (LDST_L_BIT(instr)) { - unsigned long val; - get16t_unaligned_check(val, addr); + if (LDST_L_BIT(instr)) { + unsigned long val; + get16t_unaligned_check(val, addr); - /* signed half-word? */ - if (instr & 0x40) - val = (signed long)((signed short) val); + /* signed half-word? */ + if (instr & 0x40) + val = (signed long)((signed short) val); - regs->uregs[rd] = val; - } else - put16t_unaligned_check(regs->uregs[rd], addr); + regs->uregs[rd] = val; + } else + put16t_unaligned_check(regs->uregs[rd], addr); - return TYPE_LDST; + return TYPE_LDST; fault: return TYPE_FAULT; @@ -342,11 +342,11 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr, unsigned long val; get32_unaligned_check(val, addr); regs->uregs[rd] = val; - get32_unaligned_check(val, addr+4); - regs->uregs[rd+1] = val; + get32_unaligned_check(val, addr + 4); + regs->uregs[rd + 1] = val; } else { put32_unaligned_check(regs->uregs[rd], addr); - put32_unaligned_check(regs->uregs[rd+1], addr+4); + put32_unaligned_check(regs->uregs[rd + 1], addr + 4); } return TYPE_LDST; @@ -356,11 +356,11 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr, unsigned long val; get32t_unaligned_check(val, addr); regs->uregs[rd] = val; - get32t_unaligned_check(val, addr+4); - regs->uregs[rd+1] = val; + get32t_unaligned_check(val, addr + 4); + regs->uregs[rd + 1] = val; } else { put32t_unaligned_check(regs->uregs[rd], addr); - put32t_unaligned_check(regs->uregs[rd+1], addr+4); + put32t_unaligned_check(regs->uregs[rd + 1], addr + 4); } return TYPE_LDST; @@ -443,7 +443,7 @@ do_alignment_ldmstm(unsigned long addr, unsigned long instr, struct pt_regs *reg if (LDST_P_EQ_U(instr)) /* U = P */ eaddr += 4; - /* + /* * For alignment faults on the ARM922T/ARM920T the MMU makes * the FSR (and hence addr) equal to the updated base address * of the multiple access rather than the restored value. @@ -570,7 +570,7 @@ thumb2arm(u16 tinstr) /* 6.5.1 Format 3: */ case 0x4800 >> 11: /* 7.1.28 LDR(3) */ /* NOTE: This case is not technically possible. We're - * loading 32-bit memory data via PC relative + * loading 32-bit memory data via PC relative * addressing mode. So we can and should eliminate * this case. But I'll leave it here for now. */ @@ -642,7 +642,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if (fault) { type = TYPE_FAULT; - goto bad_or_fault; + goto bad_or_fault; } if (user_mode(regs)) -- cgit v0.10.2 From 6ec5e7f3656f0397b7e8b39a7dcc77937d187596 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 12 Oct 2005 19:58:10 +0100 Subject: [ARM] 2978/1: nwfpe - clean up sparse errors Patch from Ben Dooks The NWFPE is producing a number of errors from sparse due to not defining a number of functions in the header files. Signed-off-by: Ben Dooks Signed-off-by: Russell King diff --git a/arch/arm/nwfpe/fpa11.c b/arch/arm/nwfpe/fpa11.c index 7690f73..7b3d74d 100644 --- a/arch/arm/nwfpe/fpa11.c +++ b/arch/arm/nwfpe/fpa11.c @@ -31,11 +31,6 @@ #include #include -/* forward declarations */ -unsigned int EmulateCPDO(const unsigned int); -unsigned int EmulateCPDT(const unsigned int); -unsigned int EmulateCPRT(const unsigned int); - /* Reset the FPA11 chip. Called to initialize and reset the emulator. */ static void resetFPA11(void) { diff --git a/arch/arm/nwfpe/fpa11.h b/arch/arm/nwfpe/fpa11.h index 93523ae..9677ae8 100644 --- a/arch/arm/nwfpe/fpa11.h +++ b/arch/arm/nwfpe/fpa11.h @@ -95,4 +95,24 @@ extern int8 SetRoundingMode(const unsigned int); extern int8 SetRoundingPrecision(const unsigned int); extern void nwfpe_init_fpa(union fp_state *fp); +extern unsigned int EmulateAll(unsigned int opcode); + +extern unsigned int EmulateCPDT(const unsigned int opcode); +extern unsigned int EmulateCPDO(const unsigned int opcode); +extern unsigned int EmulateCPRT(const unsigned int opcode); + +/* fpa11_cpdt.c */ +extern unsigned int PerformLDF(const unsigned int opcode); +extern unsigned int PerformSTF(const unsigned int opcode); +extern unsigned int PerformLFM(const unsigned int opcode); +extern unsigned int PerformSFM(const unsigned int opcode); + +/* single_cpdo.c */ + +extern unsigned int SingleCPDO(struct roundingData *roundData, + const unsigned int opcode, FPREG * rFd); +/* double_cpdo.c */ +extern unsigned int DoubleCPDO(struct roundingData *roundData, + const unsigned int opcode, FPREG * rFd); + #endif diff --git a/arch/arm/nwfpe/fpa11_cprt.c b/arch/arm/nwfpe/fpa11_cprt.c index adf8d30..7c67023 100644 --- a/arch/arm/nwfpe/fpa11_cprt.c +++ b/arch/arm/nwfpe/fpa11_cprt.c @@ -26,12 +26,11 @@ #include "fpa11.inl" #include "fpmodule.h" #include "fpmodule.inl" +#include "softfloat.h" #ifdef CONFIG_FPE_NWFPE_XP extern flag floatx80_is_nan(floatx80); #endif -extern flag float64_is_nan(float64); -extern flag float32_is_nan(float32); unsigned int PerformFLT(const unsigned int opcode); unsigned int PerformFIX(const unsigned int opcode); diff --git a/arch/arm/nwfpe/fpopcode.h b/arch/arm/nwfpe/fpopcode.h index 1777e92..6528e08 100644 --- a/arch/arm/nwfpe/fpopcode.h +++ b/arch/arm/nwfpe/fpopcode.h @@ -476,4 +476,10 @@ static inline unsigned int getDestinationSize(const unsigned int opcode) return (nRc); } +extern unsigned int checkCondition(const unsigned int opcode, + const unsigned int ccodes); + +extern const float64 float64Constant[]; +extern const float32 float32Constant[]; + #endif diff --git a/arch/arm/nwfpe/softfloat.h b/arch/arm/nwfpe/softfloat.h index 1c8799b..1415170 100644 --- a/arch/arm/nwfpe/softfloat.h +++ b/arch/arm/nwfpe/softfloat.h @@ -265,4 +265,7 @@ static inline flag float64_lt_nocheck(float64 a, float64 b) return (a != b) && (aSign ^ (a < b)); } +extern flag float32_is_nan( float32 a ); +extern flag float64_is_nan( float64 a ); + #endif -- cgit v0.10.2 From e6158b4a5647624ceb90074bfcc248ea3152c906 Mon Sep 17 00:00:00 2001 From: Lothar Wassmann Date: Wed, 12 Oct 2005 19:58:11 +0100 Subject: [ARM] 3002/1: Wrong parameter to uart_update_timeout() in drivers/serial/pxa.c Patch from Lothar Wassmann The function serial_pxa_set_termios() is calling uart_update_timeout() with the baud rate divisor as third parameter, while uart_update_timeout() expects the baud rate in this place. This results in a bogus port->timeout which is proportional to the baud rate. Signed-off-by: Lothar Wassmann Signed-off-by: Russell King diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index 672b359..90c2a86 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c @@ -499,7 +499,7 @@ serial_pxa_set_termios(struct uart_port *port, struct termios *termios, /* * Update the per-port timeout. */ - uart_update_timeout(port, termios->c_cflag, quot); + uart_update_timeout(port, termios->c_cflag, baud); up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; if (termios->c_iflag & INPCK) -- cgit v0.10.2 From a451e28c7642830d8b066e5a13de46934151ce3a Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Wed, 12 Oct 2005 19:58:12 +0100 Subject: [ARM] 3003/1: SSP channel map register updates for pxa2xx Patch from Liam Girdwood This patch updates the pxa2xx channel map registers definitions in pxa-regs.h Changes:- o Added description for SSP2 registers o Added definitions for SSP3 registers Signed-off-by:Liam Girdwood Signed-off-by: Russell King diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index 939d9e5..13fa2de 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -126,8 +126,8 @@ #define DRCMR12 __REG(0x40000130) /* Request to Channel Map Register for AC97 audio transmit Request */ #define DRCMR13 __REG(0x40000134) /* Request to Channel Map Register for SSP receive Request */ #define DRCMR14 __REG(0x40000138) /* Request to Channel Map Register for SSP transmit Request */ -#define DRCMR15 __REG(0x4000013c) /* Reserved */ -#define DRCMR16 __REG(0x40000140) /* Reserved */ +#define DRCMR15 __REG(0x4000013c) /* Request to Channel Map Register for SSP2 receive Request */ +#define DRCMR16 __REG(0x40000140) /* Request to Channel Map Register for SSP2 transmit Request */ #define DRCMR17 __REG(0x40000144) /* Request to Channel Map Register for ICP receive Request */ #define DRCMR18 __REG(0x40000148) /* Request to Channel Map Register for ICP transmit Request */ #define DRCMR19 __REG(0x4000014c) /* Request to Channel Map Register for STUART receive Request */ @@ -151,7 +151,8 @@ #define DRCMR37 __REG(0x40000194) /* Request to Channel Map Register for USB endpoint 13 Request */ #define DRCMR38 __REG(0x40000198) /* Request to Channel Map Register for USB endpoint 14 Request */ #define DRCMR39 __REG(0x4000019C) /* Reserved */ - +#define DRCMR66 __REG(0x40001108) /* Request to Channel Map Register for SSP3 receive Request */ +#define DRCMR67 __REG(0x4000110C) /* Request to Channel Map Register for SSP3 transmit Request */ #define DRCMR68 __REG(0x40001110) /* Request to Channel Map Register for Camera FIFO 0 Request */ #define DRCMR69 __REG(0x40001114) /* Request to Channel Map Register for Camera FIFO 1 Request */ #define DRCMR70 __REG(0x40001118) /* Request to Channel Map Register for Camera FIFO 2 Request */ -- cgit v0.10.2 From c9c10830740df1b5e7848d6fbb68c93a73e8f7cd Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 12 Oct 2005 12:22:46 -0700 Subject: [SPARC64]: Fix boot failures on SunBlade-150 The sequence to move over to the Linux trap tables from the firmware ones needs to be more air tight. It turns out that to be %100 safe we do need to be able to translate OBP mappings in our TLB miss handlers early. In order not to eat up a lot of kernel image memory with static page tables, just use the translations array in the OBP TLB miss handlers. That solves the bulk of the problem. Furthermore, to make sure the OBP TLB miss path will work even before the fixed MMU globals are loaded, explicitly load %g1 to TLB_SFSR at the beginning of the i-TLB and d-TLB miss handlers. To ease the OBP TLB miss walking of the prom_trans[] array, we sort it then delete all of the non-OBP entries in there (for example, there are entries for the kernel image itself which we're not interested in at all). We also save about 32K of kernel image size with this change. Not a bad side effect :-) There are still some reasons why trampoline.S can't use the setup_trap_table() yet. The most noteworthy are: 1) OBP boots secondary processors with non-bias'd stack for some reason. This is easily fixed by using a small bootup stack in the kernel image explicitly for this purpose. 2) Doing a firmware call via the normal C call prom_set_trap_table() goes through the whole OBP enter/exit sequence that saves and restores OBP and Linux kernel state in the MMUs. This path unfortunately does a "flush %g6" while loading up the OBP locked TLB entries for the firmware call. If we setup the %g6 in the trampoline.S code properly, that is in the PAGE_OFFSET linear mapping, but we're not on the kernel trap table yet so those addresses won't translate properly. One idea is to do a by-hand firmware call like we do in the early bootup code and elsewhere here in trampoline.S But this fails as well, as aparently the secondary processors are not booted with OBP's special locked TLB entries loaded. These are necessary for the firwmare to processes TLB misses correctly up until the point where we take over the trap table. This does need to be resolved at some point. Signed-off-by: David S. Miller diff --git a/arch/sparc64/kernel/dtlb_base.S b/arch/sparc64/kernel/dtlb_base.S index 702d349..6528786 100644 --- a/arch/sparc64/kernel/dtlb_base.S +++ b/arch/sparc64/kernel/dtlb_base.S @@ -53,19 +53,18 @@ * be guaranteed to be 0 ... mmu_context.h does guarantee this * by only using 10 bits in the hwcontext value. */ -#define CREATE_VPTE_OFFSET1(r1, r2) +#define CREATE_VPTE_OFFSET1(r1, r2) nop #define CREATE_VPTE_OFFSET2(r1, r2) \ srax r1, 10, r2 -#define CREATE_VPTE_NOP nop #else #define CREATE_VPTE_OFFSET1(r1, r2) \ srax r1, PAGE_SHIFT, r2 #define CREATE_VPTE_OFFSET2(r1, r2) \ sllx r2, 3, r2 -#define CREATE_VPTE_NOP #endif /* DTLB ** ICACHE line 1: Quick user TLB misses */ + mov TLB_SFSR, %g1 ldxa [%g1 + %g1] ASI_DMMU, %g4 ! Get TAG_ACCESS andcc %g4, TAG_CONTEXT_BITS, %g0 ! From Nucleus? from_tl1_trap: @@ -74,18 +73,16 @@ from_tl1_trap: be,pn %xcc, kvmap ! Yep, special processing CREATE_VPTE_OFFSET2(%g4, %g6) ! Create VPTE offset cmp %g5, 4 ! Last trap level? - be,pn %xcc, longpath ! Yep, cannot risk VPTE miss - nop ! delay slot /* DTLB ** ICACHE line 2: User finish + quick kernel TLB misses */ + be,pn %xcc, longpath ! Yep, cannot risk VPTE miss + nop ! delay slot ldxa [%g3 + %g6] ASI_S, %g5 ! Load VPTE 1: brgez,pn %g5, longpath ! Invalid, branch out nop ! Delay-slot 9: stxa %g5, [%g0] ASI_DTLB_DATA_IN ! Reload TLB retry ! Trap return nop - nop - nop /* DTLB ** ICACHE line 3: winfixups+real_faults */ longpath: @@ -106,8 +103,7 @@ longpath: nop nop nop - CREATE_VPTE_NOP + nop #undef CREATE_VPTE_OFFSET1 #undef CREATE_VPTE_OFFSET2 -#undef CREATE_VPTE_NOP diff --git a/arch/sparc64/kernel/dtlb_prot.S b/arch/sparc64/kernel/dtlb_prot.S index d848bb7..e0a9201 100644 --- a/arch/sparc64/kernel/dtlb_prot.S +++ b/arch/sparc64/kernel/dtlb_prot.S @@ -14,14 +14,14 @@ */ /* PROT ** ICACHE line 1: User DTLB protection trap */ - stxa %g0, [%g1] ASI_DMMU ! Clear SFSR FaultValid bit - membar #Sync ! Synchronize ASI stores - rdpr %pstate, %g5 ! Move into alternate globals + mov TLB_SFSR, %g1 + stxa %g0, [%g1] ASI_DMMU ! Clear FaultValid bit + membar #Sync ! Synchronize stores + rdpr %pstate, %g5 ! Move into alt-globals wrpr %g5, PSTATE_AG|PSTATE_MG, %pstate - rdpr %tl, %g1 ! Need to do a winfixup? + rdpr %tl, %g1 ! Need a winfixup? cmp %g1, 1 ! Trap level >1? - mov TLB_TAG_ACCESS, %g4 ! Prepare reload of vaddr - nop + mov TLB_TAG_ACCESS, %g4 ! For reload of vaddr /* PROT ** ICACHE line 2: More real fault processing */ bgu,pn %xcc, winfix_trampoline ! Yes, perform winfixup diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S index 4c942f7..b49dcd4 100644 --- a/arch/sparc64/kernel/head.S +++ b/arch/sparc64/kernel/head.S @@ -28,19 +28,14 @@ #include /* This section from from _start to sparc64_boot_end should fit into - * 0x0000.0000.0040.4000 to 0x0000.0000.0040.8000 and will be sharing space - * with bootup_user_stack, which is from 0x0000.0000.0040.4000 to - * 0x0000.0000.0040.6000 and empty_bad_page, which is from - * 0x0000.0000.0040.6000 to 0x0000.0000.0040.8000. + * 0x0000000000404000 to 0x0000000000408000. */ - .text .globl start, _start, stext, _stext _start: start: _stext: stext: -bootup_user_stack: ! 0x0000000000404000 b sparc64_boot flushw /* Flush register file. */ @@ -392,31 +387,30 @@ tlb_fixup_done: * former does use this code, the latter does not yet due * to some complexities. That should be fixed up at some * point. + * + * There used to be enormous complexity wrt. transferring + * over from the firwmare's trap table to the Linux kernel's. + * For example, there was a chicken & egg problem wrt. building + * the OBP page tables, yet needing to be on the Linux kernel + * trap table (to translate PAGE_OFFSET addresses) in order to + * do that. + * + * We now handle OBP tlb misses differently, via linear lookups + * into the prom_trans[] array. So that specific problem no + * longer exists. Yet, unfortunately there are still some issues + * preventing trampoline.S from using this code... ho hum. */ .globl setup_trap_table setup_trap_table: save %sp, -192, %sp - /* Force interrupts to be disabled. Transferring over to - * the Linux trap table is a very delicate operation. - * Until we are actually on the Linux trap table, we cannot - * get the PAGE_OFFSET linear mappings translated. We need - * that mapping to be setup in order to initialize the firmware - * page tables. - * - * So there is this window of time, from the return from - * prom_set_trap_table() until inherit_prom_mappings_post() - * (in arch/sparc64/mm/init.c) completes, during which no - * firmware address space accesses can be made. - */ + /* Force interrupts to be disabled. */ rdpr %pstate, %o1 andn %o1, PSTATE_IE, %o1 wrpr %o1, 0x0, %pstate wrpr %g0, 15, %pil - /* Ok, now make the final valid firmware call to jump over - * to the Linux trap table. - */ + /* Make the firmware call to jump over to the Linux trap table. */ call prom_set_trap_table sethi %hi(sparc64_ttable_tl0), %o0 @@ -540,15 +534,21 @@ setup_tba: /* i0 = is_starfire */ ret restore +sparc64_boot_end: + +#include "systbls.S" +#include "ktlb.S" +#include "etrap.S" +#include "rtrap.S" +#include "winfixup.S" +#include "entry.S" /* - * The following skips make sure the trap table in ttable.S is aligned + * The following skip makes sure the trap table in ttable.S is aligned * on a 32K boundary as required by the v9 specs for TBA register. */ -sparc64_boot_end: - .skip 0x2000 + _start - sparc64_boot_end -bootup_user_stack_end: - .skip 0x2000 +1: + .skip 0x4000 + _start - 1b #ifdef CONFIG_SBUS /* This is just a hack to fool make depend config.h discovering @@ -560,15 +560,6 @@ bootup_user_stack_end: ! 0x0000000000408000 #include "ttable.S" -#include "systbls.S" -#include "ktlb.S" -#include "etrap.S" -#include "rtrap.S" -#include "winfixup.S" -#include "entry.S" - - /* This is just anal retentiveness on my part... */ - .align 16384 .data .align 8 diff --git a/arch/sparc64/kernel/itlb_base.S b/arch/sparc64/kernel/itlb_base.S index b5e32df..4951ff8 100644 --- a/arch/sparc64/kernel/itlb_base.S +++ b/arch/sparc64/kernel/itlb_base.S @@ -15,14 +15,12 @@ */ #define CREATE_VPTE_OFFSET1(r1, r2) \ srax r1, 10, r2 -#define CREATE_VPTE_OFFSET2(r1, r2) -#define CREATE_VPTE_NOP nop +#define CREATE_VPTE_OFFSET2(r1, r2) nop #else /* PAGE_SHIFT */ #define CREATE_VPTE_OFFSET1(r1, r2) \ srax r1, PAGE_SHIFT, r2 #define CREATE_VPTE_OFFSET2(r1, r2) \ sllx r2, 3, r2 -#define CREATE_VPTE_NOP #endif /* PAGE_SHIFT */ @@ -36,6 +34,7 @@ */ /* ITLB ** ICACHE line 1: Quick user TLB misses */ + mov TLB_SFSR, %g1 ldxa [%g1 + %g1] ASI_IMMU, %g4 ! Get TAG_ACCESS CREATE_VPTE_OFFSET1(%g4, %g6) ! Create VPTE offset CREATE_VPTE_OFFSET2(%g4, %g6) ! Create VPTE offset @@ -43,41 +42,38 @@ 1: brgez,pn %g5, 3f ! Not valid, branch out sethi %hi(_PAGE_EXEC), %g4 ! Delay-slot andcc %g5, %g4, %g0 ! Executable? + +/* ITLB ** ICACHE line 2: Real faults */ be,pn %xcc, 3f ! Nope, branch. nop ! Delay-slot 2: stxa %g5, [%g0] ASI_ITLB_DATA_IN ! Load PTE into TLB retry ! Trap return -3: rdpr %pstate, %g4 ! Move into alternate globals - -/* ITLB ** ICACHE line 2: Real faults */ +3: rdpr %pstate, %g4 ! Move into alt-globals wrpr %g4, PSTATE_AG|PSTATE_MG, %pstate rdpr %tpc, %g5 ! And load faulting VA mov FAULT_CODE_ITLB, %g4 ! It was read from ITLB -sparc64_realfault_common: ! Called by TL0 dtlb_miss too + +/* ITLB ** ICACHE line 3: Finish faults */ +sparc64_realfault_common: ! Called by dtlb_miss stb %g4, [%g6 + TI_FAULT_CODE] stx %g5, [%g6 + TI_FAULT_ADDR] ba,pt %xcc, etrap ! Save state 1: rd %pc, %g7 ! ... - nop - -/* ITLB ** ICACHE line 3: Finish faults + window fixups */ call do_sparc64_fault ! Call fault handler add %sp, PTREGS_OFF, %o0! Compute pt_regs arg ba,pt %xcc, rtrap_clr_l6 ! Restore cpu state nop + +/* ITLB ** ICACHE line 4: Window fixups */ winfix_trampoline: rdpr %tpc, %g3 ! Prepare winfixup TNPC - or %g3, 0x7c, %g3 ! Compute offset to branch + or %g3, 0x7c, %g3 ! Compute branch offset wrpr %g3, %tnpc ! Write it into TNPC done ! Do it to it - -/* ITLB ** ICACHE line 4: Unused... */ nop nop nop nop - CREATE_VPTE_NOP #undef CREATE_VPTE_OFFSET1 #undef CREATE_VPTE_OFFSET2 -#undef CREATE_VPTE_NOP diff --git a/arch/sparc64/kernel/ktlb.S b/arch/sparc64/kernel/ktlb.S index 7796b37..d9244d3 100644 --- a/arch/sparc64/kernel/ktlb.S +++ b/arch/sparc64/kernel/ktlb.S @@ -58,9 +58,6 @@ vpte_noent: done vpte_insn_obp: - sethi %hi(prom_pmd_phys), %g5 - ldx [%g5 + %lo(prom_pmd_phys)], %g5 - /* Behave as if we are at TL0. */ wrpr %g0, 1, %tl rdpr %tpc, %g4 /* Find original faulting iaddr */ @@ -71,58 +68,57 @@ vpte_insn_obp: mov TLB_SFSR, %g1 stxa %g4, [%g1 + %g1] ASI_IMMU - /* Get PMD offset. */ - srlx %g4, 23, %g6 - and %g6, 0x7ff, %g6 - sllx %g6, 2, %g6 - - /* Load PMD, is it valid? */ - lduwa [%g5 + %g6] ASI_PHYS_USE_EC, %g5 - brz,pn %g5, longpath - sllx %g5, 11, %g5 - - /* Get PTE offset. */ - srlx %g4, 13, %g6 - and %g6, 0x3ff, %g6 - sllx %g6, 3, %g6 - - /* Load PTE. */ - ldxa [%g5 + %g6] ASI_PHYS_USE_EC, %g5 - brgez,pn %g5, longpath - nop - - /* TLB load and return from trap. */ + sethi %hi(prom_trans), %g5 + or %g5, %lo(prom_trans), %g5 + +1: ldx [%g5 + 0x00], %g6 ! base + brz,a,pn %g6, longpath ! no more entries, fail + mov TLB_SFSR, %g1 ! and restore %g1 + ldx [%g5 + 0x08], %g1 ! len + add %g6, %g1, %g1 ! end + cmp %g6, %g4 + bgu,pt %xcc, 2f + cmp %g4, %g1 + bgeu,pt %xcc, 2f + ldx [%g5 + 0x10], %g1 ! PTE + + /* TLB load, restore %g1, and return from trap. */ + sub %g4, %g6, %g6 + add %g1, %g6, %g5 + mov TLB_SFSR, %g1 stxa %g5, [%g0] ASI_ITLB_DATA_IN retry -kvmap_do_obp: - sethi %hi(prom_pmd_phys), %g5 - ldx [%g5 + %lo(prom_pmd_phys)], %g5 - - /* Get PMD offset. */ - srlx %g4, 23, %g6 - and %g6, 0x7ff, %g6 - sllx %g6, 2, %g6 - - /* Load PMD, is it valid? */ - lduwa [%g5 + %g6] ASI_PHYS_USE_EC, %g5 - brz,pn %g5, longpath - sllx %g5, 11, %g5 - - /* Get PTE offset. */ - srlx %g4, 13, %g6 - and %g6, 0x3ff, %g6 - sllx %g6, 3, %g6 - - /* Load PTE. */ - ldxa [%g5 + %g6] ASI_PHYS_USE_EC, %g5 - brgez,pn %g5, longpath - nop +2: ba,pt %xcc, 1b + add %g5, (3 * 8), %g5 ! next entry - /* TLB load and return from trap. */ +kvmap_do_obp: + sethi %hi(prom_trans), %g5 + or %g5, %lo(prom_trans), %g5 + srlx %g4, 13, %g4 + sllx %g4, 13, %g4 + +1: ldx [%g5 + 0x00], %g6 ! base + brz,a,pn %g6, longpath ! no more entries, fail + mov TLB_SFSR, %g1 ! and restore %g1 + ldx [%g5 + 0x08], %g1 ! len + add %g6, %g1, %g1 ! end + cmp %g6, %g4 + bgu,pt %xcc, 2f + cmp %g4, %g1 + bgeu,pt %xcc, 2f + ldx [%g5 + 0x10], %g1 ! PTE + + /* TLB load, restore %g1, and return from trap. */ + sub %g4, %g6, %g6 + add %g1, %g6, %g5 + mov TLB_SFSR, %g1 stxa %g5, [%g0] ASI_DTLB_DATA_IN retry +2: ba,pt %xcc, 1b + add %g5, (3 * 8), %g5 ! next entry + /* * On a first level data miss, check whether this is to the OBP range (note * that such accesses can be made by prom, as well as by kernel using diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 0d2e967..1e44ee2 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -105,7 +105,7 @@ static void __init read_obp_memory(const char *property, regs[i].phys_addr = base; regs[i].reg_size = size; } - sort(regs, ents, sizeof(struct linux_prom64_registers), + sort(regs, ents, sizeof(struct linux_prom64_registers), cmp_p64, NULL); } @@ -367,8 +367,11 @@ struct linux_prom_translation { unsigned long size; unsigned long data; }; -static struct linux_prom_translation prom_trans[512] __initdata; -static unsigned int prom_trans_ents __initdata; + +/* Exported for kernel TLB miss handling in ktlb.S */ +struct linux_prom_translation prom_trans[512] __read_mostly; +unsigned int prom_trans_ents __read_mostly; +unsigned int swapper_pgd_zero __read_mostly; extern unsigned long prom_boot_page; extern void prom_remap(unsigned long physpage, unsigned long virtpage, int mmu_ihandle); @@ -378,122 +381,57 @@ extern void register_prom_callbacks(void); /* Exported for SMP bootup purposes. */ unsigned long kern_locked_tte_data; -/* Exported for kernel TLB miss handling in ktlb.S */ -unsigned long prom_pmd_phys __read_mostly; -unsigned int swapper_pgd_zero __read_mostly; - -static pmd_t *prompmd __read_mostly; - -#define BASE_PAGE_SIZE 8192 - /* * Translate PROM's mapping we capture at boot time into physical address. * The second parameter is only set from prom_callback() invocations. */ unsigned long prom_virt_to_phys(unsigned long promva, int *error) { - pmd_t *pmdp = prompmd + ((promva >> 23) & 0x7ff); - pte_t *ptep; - unsigned long base; - - if (pmd_none(*pmdp)) { - if (error) - *error = 1; - return 0; - } - ptep = (pte_t *)__pmd_page(*pmdp) + ((promva >> 13) & 0x3ff); - if (!pte_present(*ptep)) { - if (error) - *error = 1; - return 0; - } - if (error) { - *error = 0; - return pte_val(*ptep); - } - base = pte_val(*ptep) & _PAGE_PADDR; - - return base + (promva & (BASE_PAGE_SIZE - 1)); -} + int i; -/* The obp translations are saved based on 8k pagesize, since obp can - * use a mixture of pagesizes. Misses to the LOW_OBP_ADDRESS -> - * HI_OBP_ADDRESS range are handled in entry.S and do not use the vpte - * scheme (also, see rant in inherit_locked_prom_mappings()). - */ -static void __init build_obp_range(unsigned long start, unsigned long end, unsigned long data) -{ - unsigned long vaddr; + for (i = 0; i < prom_trans_ents; i++) { + struct linux_prom_translation *p = &prom_trans[i]; - for (vaddr = start; vaddr < end; vaddr += BASE_PAGE_SIZE) { - unsigned long val; - pmd_t *pmd; - pte_t *pte; + if (promva >= p->virt && + promva < (p->virt + p->size)) { + unsigned long base = p->data & _PAGE_PADDR; - pmd = prompmd + ((vaddr >> 23) & 0x7ff); - if (pmd_none(*pmd)) { - pte = __alloc_bootmem(BASE_PAGE_SIZE, BASE_PAGE_SIZE, - PAGE_SIZE); - if (!pte) - prom_halt(); - memset(pte, 0, BASE_PAGE_SIZE); - pmd_set(pmd, pte); + if (error) + *error = 0; + return base + (promva & (8192 - 1)); } - pte = (pte_t *) __pmd_page(*pmd) + ((vaddr >> 13) & 0x3ff); - - val = data; - - /* Clear diag TTE bits. */ - if (tlb_type == spitfire) - val &= ~0x0003fe0000000000UL; - - set_pte_at(&init_mm, vaddr, pte, - __pte(val | _PAGE_MODIFIED)); - - data += BASE_PAGE_SIZE; } + if (error) + *error = 1; + return 0UL; } +/* The obp translations are saved based on 8k pagesize, since obp can + * use a mixture of pagesizes. Misses to the LOW_OBP_ADDRESS -> + * HI_OBP_ADDRESS range are handled in ktlb.S and do not use the vpte + * scheme (also, see rant in inherit_locked_prom_mappings()). + */ static inline int in_obp_range(unsigned long vaddr) { return (vaddr >= LOW_OBP_ADDRESS && vaddr < HI_OBP_ADDRESS); } -#define OBP_PMD_SIZE 2048 -static void __init build_obp_pgtable(void) +static int cmp_ptrans(const void *a, const void *b) { - unsigned long i; - - prompmd = __alloc_bootmem(OBP_PMD_SIZE, OBP_PMD_SIZE, PAGE_SIZE); - if (!prompmd) - prom_halt(); - - memset(prompmd, 0, OBP_PMD_SIZE); - - prom_pmd_phys = __pa(prompmd); - - for (i = 0; i < prom_trans_ents; i++) { - unsigned long start, end; - - if (!in_obp_range(prom_trans[i].virt)) - continue; + const struct linux_prom_translation *x = a, *y = b; - start = prom_trans[i].virt; - end = start + prom_trans[i].size; - if (end > HI_OBP_ADDRESS) - end = HI_OBP_ADDRESS; - - build_obp_range(start, end, prom_trans[i].data); - } + if (x->virt > y->virt) + return 1; + if (x->virt < y->virt) + return -1; + return 0; } -/* Read OBP translations property into 'prom_trans[]'. - * Return the number of entries. - */ +/* Read OBP translations property into 'prom_trans[]'. */ static void __init read_obp_translations(void) { - int n, node; + int n, node, ents, first, last, i; node = prom_finddevice("/virtual-memory"); n = prom_getproplen(node, "translations"); @@ -515,7 +453,41 @@ static void __init read_obp_translations(void) n = n / sizeof(struct linux_prom_translation); - prom_trans_ents = n; + ents = n; + + sort(prom_trans, ents, sizeof(struct linux_prom_translation), + cmp_ptrans, NULL); + + /* Now kick out all the non-OBP entries. */ + for (i = 0; i < ents; i++) { + if (in_obp_range(prom_trans[i].virt)) + break; + } + first = i; + for (; i < ents; i++) { + if (!in_obp_range(prom_trans[i].virt)) + break; + } + last = i; + + for (i = 0; i < (last - first); i++) { + struct linux_prom_translation *src = &prom_trans[i + first]; + struct linux_prom_translation *dest = &prom_trans[i]; + + *dest = *src; + } + for (; i < ents; i++) { + struct linux_prom_translation *dest = &prom_trans[i]; + dest->virt = dest->size = dest->data = 0x0UL; + } + + prom_trans_ents = last - first; + + if (tlb_type == spitfire) { + /* Clear diag TTE bits. */ + for (i = 0; i < prom_trans_ents; i++) + prom_trans[i].data &= ~0x0003fe0000000000UL; + } } static void __init remap_kernel(void) @@ -553,21 +525,18 @@ static void __init remap_kernel(void) } -static void __init inherit_prom_mappings_pre(void) +static void __init inherit_prom_mappings(void) { read_obp_translations(); /* Now fixup OBP's idea about where we really are mapped. */ prom_printf("Remapping the kernel... "); remap_kernel(); - prom_printf("done.\n"); -} -static void __init inherit_prom_mappings_post(void) -{ - build_obp_pgtable(); + prom_printf("Registering callbacks... "); register_prom_callbacks(); + prom_printf("done.\n"); } /* The OBP specifications for sun4u mark 0xfffffffc00000000 and @@ -1519,7 +1488,7 @@ void __init paging_init(void) swapper_pgd_zero = pgd_val(swapper_pg_dir[0]); - inherit_prom_mappings_pre(); + inherit_prom_mappings(); /* Ok, we can use our TLB miss and window trap handlers safely. * We need to do a quick peek here to see if we are on StarFire @@ -1530,23 +1499,15 @@ void __init paging_init(void) extern void setup_tba(int); setup_tba(this_is_starfire); } - __flush_tlb_all(); - /* Everything from this point forward, until we are done with - * inherit_prom_mappings_post(), must complete successfully - * without calling into the firmware. The firwmare page tables - * have not been built, but we are running on the Linux kernel's - * trap table. - */ + inherit_locked_prom_mappings(1); + + __flush_tlb_all(); /* Setup bootmem... */ pages_avail = 0; last_valid_pfn = end_pfn = bootmem_init(&pages_avail); - inherit_prom_mappings_post(); - - inherit_locked_prom_mappings(1); - #ifdef CONFIG_DEBUG_PAGEALLOC kernel_physical_mapping_init(); #endif -- cgit v0.10.2 From ab4060e858e36129f9319ef0fa055347ad60e1d5 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 12 Oct 2005 15:10:01 -0700 Subject: [BRIDGE]: fix race on bridge del if This fixes the RCU race on bridge delete interface. Basically, the network device has to be detached from the bridge in the first step (pre-RCU), rather than later. At that point, no more bridge traffic will come in, and the other code will not think that network device is part of a bridge. This should also fix the XEN test problems. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c index 91bb895..defcf6a 100644 --- a/net/bridge/br_if.c +++ b/net/bridge/br_if.c @@ -79,7 +79,6 @@ static void destroy_nbp(struct net_bridge_port *p) { struct net_device *dev = p->dev; - dev->br_port = NULL; p->br = NULL; p->dev = NULL; dev_put(dev); @@ -100,6 +99,7 @@ static void del_nbp(struct net_bridge_port *p) struct net_bridge *br = p->br; struct net_device *dev = p->dev; + dev->br_port = NULL; dev_set_promiscuity(dev, -1); spin_lock_bh(&br->lock); -- cgit v0.10.2 From afb997c6163b33292d31a09d6aa5cbb03ffa5bf1 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 12 Oct 2005 15:12:21 -0700 Subject: [NETPOLL]: wrong return for null netpoll_poll_lock() When netpoll is not being used, the macro that defines the removed routing netpoll_poll_lock defines the return as zero, but the real routine returns a `void *` Signed-off-by: Ben Dooks Signed-off-by: David S. Miller diff --git a/include/linux/netpoll.h b/include/linux/netpoll.h index 5ade54a..ca5a873 100644 --- a/include/linux/netpoll.h +++ b/include/linux/netpoll.h @@ -86,7 +86,7 @@ static inline void netpoll_poll_unlock(void *have) #else #define netpoll_rx(a) 0 -#define netpoll_poll_lock(a) 0 +#define netpoll_poll_lock(a) NULL #define netpoll_poll_unlock(a) #endif -- cgit v0.10.2 From 9ff5c59ce278c37bca22fbf98076d199bcaf9845 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Wed, 12 Oct 2005 15:59:39 -0700 Subject: [TCP]: Add code to help track down "BUG at net/ipv4/tcp_output.c:438!" This is the second report of this bug. Unfortunately the first reporter hasn't been able to reproduce it since to provide more debugging info. So let's apply this patch for 2.6.14 to 1) Make this non-fatal. 2) Provide the info we need to track it down. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 8225e42..f37a50e 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -435,7 +435,14 @@ int tcp_fragment(struct sock *sk, struct sk_buff *skb, u32 len, unsigned int mss int nsize, old_factor; u16 flags; - BUG_ON(len >= skb->len); + if (unlikely(len >= skb->len)) { + printk(KERN_DEBUG "TCP: seg_size=%u, mss=%u, seq=%u, " + "end_seq=%u, skb->len=%u.\n", len, mss_now, + TCP_SKB_CB(skb)->seq, TCP_SKB_CB(skb)->end_seq, + skb->len); + WARN_ON(1); + return 0; + } nsize = skb_headlen(skb) - len; if (nsize < 0) -- cgit v0.10.2 From 9153bd75f25ff3170f07fb9ac1fb0e718afc6fce Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 13 Oct 2005 16:46:35 +0100 Subject: [ARM] 3005/1: S3C2440 - add definition for s3c2440_set_dsc() call in hardware.h Patch from Ben Dooks include/asm-arm/arch-s3c2410/hardware.h was missing the definition for s3c2440_set_dsc() Signed-off-by: Ben Dooks Signed-off-by: Russell King diff --git a/include/asm-arm/arch-s3c2410/hardware.h b/include/asm-arm/arch-s3c2410/hardware.h index 48a3991..1c9de29 100644 --- a/include/asm-arm/arch-s3c2410/hardware.h +++ b/include/asm-arm/arch-s3c2410/hardware.h @@ -92,6 +92,13 @@ extern unsigned int s3c2410_gpio_getpin(unsigned int pin); extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg); +#ifdef CONFIG_CPU_S3C2440 + +extern int s3c2440_set_dsc(unsigned int pin, unsigned int value); + +#endif /* CONFIG_CPU_S3C2440 */ + + #endif /* __ASSEMBLY__ */ #include -- cgit v0.10.2 From 3a8f675c40ba2d04e4fff6710db3da763436269f Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 13 Oct 2005 16:46:35 +0100 Subject: [ARM] 3006/1: S3C2410 - arch/arm/mach-s3c2410 sparse fixes Patch from Ben Dooks Remove an unused variable from s3c2410.c and ensure that items not needed to be exported from s3c2440.c are declared static. Signed-off-by: Ben Dooks Signed-off-by: Russell King diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index 0b88993..a8bf5ec 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -125,9 +125,6 @@ static struct platform_device *uart_devices[] __initdata = { &s3c_uart2 }; -/* store our uart devices for the serial driver console */ -struct platform_device *s3c2410_uart_devices[3]; - static int s3c2410_uart_count = 0; /* uart registration process */ diff --git a/arch/arm/mach-s3c2410/s3c2440.c b/arch/arm/mach-s3c2410/s3c2440.c index d4c8281..833fa36 100644 --- a/arch/arm/mach-s3c2410/s3c2440.c +++ b/arch/arm/mach-s3c2410/s3c2440.c @@ -151,7 +151,7 @@ void __init s3c2440_init_uarts(struct s3c2410_uartcfg *cfg, int no) #ifdef CONFIG_PM -struct sleep_save s3c2440_sleep[] = { +static struct sleep_save s3c2440_sleep[] = { SAVE_ITEM(S3C2440_DSC0), SAVE_ITEM(S3C2440_DSC1), SAVE_ITEM(S3C2440_GPJDAT), @@ -260,7 +260,7 @@ void __init s3c2440_init_clocks(int xtal) * as a driver which may support both 2410 and 2440 may try and use it. */ -int __init s3c2440_core_init(void) +static int __init s3c2440_core_init(void) { return sysdev_class_register(&s3c2440_sysclass); } -- cgit v0.10.2 From 50688ea9ed6fe154058c065bc7dc60980533a2c8 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 13 Oct 2005 22:04:36 +0100 Subject: [ARM] 3007/1: BAST - add CONFIG_ISA to build Patch from Ben Dooks The Simtec EB2410ITX (BAST) has a PC/104 slot, and therefore we should enable CONFIG_ISA to allow the drivers for ISA peripherals to be selected Signed-off-by: Ben Dooks Signed-off-by: Russell King diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 06807c6..c796bcd 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -12,6 +12,7 @@ config MACH_ANUBIS config ARCH_BAST bool "Simtec Electronics BAST (EB2410ITX)" select CPU_S3C2410 + select ISA help Say Y here if you are using the Simtec Electronics EB2410ITX development board (also known as BAST) -- cgit v0.10.2 From 13b1f64c16e2eb96a021b49cf3986528046ba3dc Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Thu, 13 Oct 2005 22:04:37 +0100 Subject: [ARM] 3008/1: the exception table is not read-only Patch from Nicolas Pitre ... and therefore should not live in the .text section. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 08e58ec..0d5db52 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -89,13 +89,6 @@ SECTIONS *(.got) /* Global offset table */ } - . = ALIGN(16); - __ex_table : { /* Exception table */ - __start___ex_table = .; - *(__ex_table) - __stop___ex_table = .; - } - RODATA _etext = .; /* End of text and rodata section */ @@ -138,6 +131,14 @@ SECTIONS *(.data.cacheline_aligned) /* + * The exception fixup table (might need resorting at runtime) + */ + . = ALIGN(32); + __start___ex_table = .; + *(__ex_table) + __stop___ex_table = .; + + /* * and the usual data section */ *(.data) -- cgit v0.10.2 From c8923c6b852d3a97c1faad0566e38fca330375a7 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 13 Oct 2005 14:41:23 -0700 Subject: [NETFILTER]: Fix OOPSes on machines with discontiguous cpu numbering. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Original patch by Harald Welte, with feedback from Herbert Xu and testing by Sébastien Bernard. EBTABLES, ARP tables, and IP/IP6 tables all assume that cpus are numbered linearly. That is not necessarily true. This patch fixes that up by calculating the largest possible cpu number, and allocating enough per-cpu structure space given that. Signed-off-by: David S. Miller diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c index 2c5cae0..957f551 100644 --- a/arch/cris/arch-v32/kernel/smp.c +++ b/arch/cris/arch-v32/kernel/smp.c @@ -15,6 +15,7 @@ #include #include #include +#include #define IPI_SCHEDULE 1 #define IPI_CALL 2 @@ -28,6 +29,7 @@ spinlock_t cris_atomic_locks[] = { [0 ... LOCK_COUNT - 1] = SPIN_LOCK_UNLOCKED}; /* CPU masks */ cpumask_t cpu_online_map = CPU_MASK_NONE; cpumask_t phys_cpu_present_map = CPU_MASK_NONE; +EXPORT_SYMBOL(phys_cpu_present_map); /* Variables used during SMP boot */ volatile int cpu_now_booting = 0; diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c index 56a39d6..5ecefc0 100644 --- a/arch/sh/kernel/smp.c +++ b/arch/sh/kernel/smp.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -39,6 +40,8 @@ struct sh_cpuinfo cpu_data[NR_CPUS]; extern void per_cpu_trap_init(void); cpumask_t cpu_possible_map; +EXPORT_SYMBOL(cpu_possible_map); + cpumask_t cpu_online_map; static atomic_t cpus_booted = ATOMIC_INIT(0); diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index b15826f..fe97783 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -392,4 +392,16 @@ extern cpumask_t cpu_present_map; #define for_each_online_cpu(cpu) for_each_cpu_mask((cpu), cpu_online_map) #define for_each_present_cpu(cpu) for_each_cpu_mask((cpu), cpu_present_map) +/* Find the highest possible smp_processor_id() */ +static inline unsigned int highest_possible_processor_id(void) +{ + unsigned int cpu, highest = 0; + + for_each_cpu_mask(cpu, cpu_possible_map) + highest = cpu; + + return highest; +} + + #endif /* __LINUX_CPUMASK_H */ diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c index c454014..f8ffbf6 100644 --- a/net/bridge/netfilter/ebtables.c +++ b/net/bridge/netfilter/ebtables.c @@ -26,6 +26,7 @@ #include #include #include +#include #include /* needed for logical [in,out]-dev filtering */ #include "../br_private.h" @@ -823,10 +824,11 @@ static int translate_table(struct ebt_replace *repl, /* this will get free'd in do_replace()/ebt_register_table() if an error occurs */ newinfo->chainstack = (struct ebt_chainstack **) - vmalloc(num_possible_cpus() * sizeof(struct ebt_chainstack)); + vmalloc((highest_possible_processor_id()+1) + * sizeof(struct ebt_chainstack)); if (!newinfo->chainstack) return -ENOMEM; - for (i = 0; i < num_possible_cpus(); i++) { + for_each_cpu(i) { newinfo->chainstack[i] = vmalloc(udc_cnt * sizeof(struct ebt_chainstack)); if (!newinfo->chainstack[i]) { @@ -895,9 +897,12 @@ static void get_counters(struct ebt_counter *oldcounters, /* counters of cpu 0 */ memcpy(counters, oldcounters, - sizeof(struct ebt_counter) * nentries); + sizeof(struct ebt_counter) * nentries); + /* add other counters to those of cpu 0 */ - for (cpu = 1; cpu < num_possible_cpus(); cpu++) { + for_each_cpu(cpu) { + if (cpu == 0) + continue; counter_base = COUNTER_BASE(oldcounters, nentries, cpu); for (i = 0; i < nentries; i++) { counters[i].pcnt += counter_base[i].pcnt; @@ -929,7 +934,8 @@ static int do_replace(void __user *user, unsigned int len) BUGPRINT("Entries_size never zero\n"); return -EINVAL; } - countersize = COUNTER_OFFSET(tmp.nentries) * num_possible_cpus(); + countersize = COUNTER_OFFSET(tmp.nentries) * + (highest_possible_processor_id()+1); newinfo = (struct ebt_table_info *) vmalloc(sizeof(struct ebt_table_info) + countersize); if (!newinfo) @@ -1022,7 +1028,7 @@ static int do_replace(void __user *user, unsigned int len) vfree(table->entries); if (table->chainstack) { - for (i = 0; i < num_possible_cpus(); i++) + for_each_cpu(i) vfree(table->chainstack[i]); vfree(table->chainstack); } @@ -1040,7 +1046,7 @@ free_counterstmp: vfree(counterstmp); /* can be initialized in translate_table() */ if (newinfo->chainstack) { - for (i = 0; i < num_possible_cpus(); i++) + for_each_cpu(i) vfree(newinfo->chainstack[i]); vfree(newinfo->chainstack); } @@ -1132,7 +1138,8 @@ int ebt_register_table(struct ebt_table *table) return -EINVAL; } - countersize = COUNTER_OFFSET(table->table->nentries) * num_possible_cpus(); + countersize = COUNTER_OFFSET(table->table->nentries) * + (highest_possible_processor_id()+1); newinfo = (struct ebt_table_info *) vmalloc(sizeof(struct ebt_table_info) + countersize); ret = -ENOMEM; @@ -1186,7 +1193,7 @@ free_unlock: up(&ebt_mutex); free_chainstack: if (newinfo->chainstack) { - for (i = 0; i < num_possible_cpus(); i++) + for_each_cpu(i) vfree(newinfo->chainstack[i]); vfree(newinfo->chainstack); } @@ -1209,7 +1216,7 @@ void ebt_unregister_table(struct ebt_table *table) up(&ebt_mutex); vfree(table->private->entries); if (table->private->chainstack) { - for (i = 0; i < num_possible_cpus(); i++) + for_each_cpu(i) vfree(table->private->chainstack[i]); vfree(table->private->chainstack); } diff --git a/net/ipv4/netfilter/arp_tables.c b/net/ipv4/netfilter/arp_tables.c index fa16342..a796928 100644 --- a/net/ipv4/netfilter/arp_tables.c +++ b/net/ipv4/netfilter/arp_tables.c @@ -716,8 +716,10 @@ static int translate_table(const char *name, } /* And one copy for every other CPU */ - for (i = 1; i < num_possible_cpus(); i++) { - memcpy(newinfo->entries + SMP_ALIGN(newinfo->size)*i, + for_each_cpu(i) { + if (i == 0) + continue; + memcpy(newinfo->entries + SMP_ALIGN(newinfo->size) * i, newinfo->entries, SMP_ALIGN(newinfo->size)); } @@ -767,7 +769,7 @@ static void get_counters(const struct arpt_table_info *t, unsigned int cpu; unsigned int i; - for (cpu = 0; cpu < num_possible_cpus(); cpu++) { + for_each_cpu(cpu) { i = 0; ARPT_ENTRY_ITERATE(t->entries + TABLE_OFFSET(t, cpu), t->size, @@ -885,7 +887,8 @@ static int do_replace(void __user *user, unsigned int len) return -ENOMEM; newinfo = vmalloc(sizeof(struct arpt_table_info) - + SMP_ALIGN(tmp.size) * num_possible_cpus()); + + SMP_ALIGN(tmp.size) * + (highest_possible_processor_id()+1)); if (!newinfo) return -ENOMEM; @@ -1158,7 +1161,8 @@ int arpt_register_table(struct arpt_table *table, = { 0, 0, 0, { 0 }, { 0 }, { } }; newinfo = vmalloc(sizeof(struct arpt_table_info) - + SMP_ALIGN(repl->size) * num_possible_cpus()); + + SMP_ALIGN(repl->size) * + (highest_possible_processor_id()+1)); if (!newinfo) { ret = -ENOMEM; return ret; diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c index eef99a1..75c27e9 100644 --- a/net/ipv4/netfilter/ip_tables.c +++ b/net/ipv4/netfilter/ip_tables.c @@ -27,6 +27,7 @@ #include #include #include +#include #include @@ -921,8 +922,10 @@ translate_table(const char *name, } /* And one copy for every other CPU */ - for (i = 1; i < num_possible_cpus(); i++) { - memcpy(newinfo->entries + SMP_ALIGN(newinfo->size)*i, + for_each_cpu(i) { + if (i == 0) + continue; + memcpy(newinfo->entries + SMP_ALIGN(newinfo->size) * i, newinfo->entries, SMP_ALIGN(newinfo->size)); } @@ -943,7 +946,7 @@ replace_table(struct ipt_table *table, struct ipt_entry *table_base; unsigned int i; - for (i = 0; i < num_possible_cpus(); i++) { + for_each_cpu(i) { table_base = (void *)newinfo->entries + TABLE_OFFSET(newinfo, i); @@ -990,7 +993,7 @@ get_counters(const struct ipt_table_info *t, unsigned int cpu; unsigned int i; - for (cpu = 0; cpu < num_possible_cpus(); cpu++) { + for_each_cpu(cpu) { i = 0; IPT_ENTRY_ITERATE(t->entries + TABLE_OFFSET(t, cpu), t->size, @@ -1128,7 +1131,8 @@ do_replace(void __user *user, unsigned int len) return -ENOMEM; newinfo = vmalloc(sizeof(struct ipt_table_info) - + SMP_ALIGN(tmp.size) * num_possible_cpus()); + + SMP_ALIGN(tmp.size) * + (highest_possible_processor_id()+1)); if (!newinfo) return -ENOMEM; @@ -1458,7 +1462,8 @@ int ipt_register_table(struct ipt_table *table, const struct ipt_replace *repl) = { 0, 0, 0, { 0 }, { 0 }, { } }; newinfo = vmalloc(sizeof(struct ipt_table_info) - + SMP_ALIGN(repl->size) * num_possible_cpus()); + + SMP_ALIGN(repl->size) * + (highest_possible_processor_id()+1)); if (!newinfo) return -ENOMEM; diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c index 2da514b..b03e906 100644 --- a/net/ipv6/netfilter/ip6_tables.c +++ b/net/ipv6/netfilter/ip6_tables.c @@ -28,6 +28,7 @@ #include #include #include +#include #include @@ -950,8 +951,10 @@ translate_table(const char *name, } /* And one copy for every other CPU */ - for (i = 1; i < num_possible_cpus(); i++) { - memcpy(newinfo->entries + SMP_ALIGN(newinfo->size)*i, + for_each_cpu(i) { + if (i == 0) + continue; + memcpy(newinfo->entries + SMP_ALIGN(newinfo->size) * i, newinfo->entries, SMP_ALIGN(newinfo->size)); } @@ -973,6 +976,7 @@ replace_table(struct ip6t_table *table, unsigned int i; for (i = 0; i < num_possible_cpus(); i++) { + for_each_cpu(i) { table_base = (void *)newinfo->entries + TABLE_OFFSET(newinfo, i); @@ -1019,7 +1023,7 @@ get_counters(const struct ip6t_table_info *t, unsigned int cpu; unsigned int i; - for (cpu = 0; cpu < num_possible_cpus(); cpu++) { + for_each_cpu(cpu) { i = 0; IP6T_ENTRY_ITERATE(t->entries + TABLE_OFFSET(t, cpu), t->size, @@ -1153,7 +1157,8 @@ do_replace(void __user *user, unsigned int len) return -ENOMEM; newinfo = vmalloc(sizeof(struct ip6t_table_info) - + SMP_ALIGN(tmp.size) * num_possible_cpus()); + + SMP_ALIGN(tmp.size) * + (highest_possible_processor_id()+1)); if (!newinfo) return -ENOMEM; @@ -1467,7 +1472,8 @@ int ip6t_register_table(struct ip6t_table *table, = { 0, 0, 0, { 0 }, { 0 }, { } }; newinfo = vmalloc(sizeof(struct ip6t_table_info) - + SMP_ALIGN(repl->size) * num_possible_cpus()); + + SMP_ALIGN(repl->size) * + (highest_possible_processor_id()+1)); if (!newinfo) return -ENOMEM; -- cgit v0.10.2 From 34cb711ba922f53cca45443b8c3c1078873cf599 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Thu, 13 Oct 2005 14:41:44 -0700 Subject: [NET]: Disable NET_SCH_CLK_CPU for SMP x86 hosts Opterons with frequency scaling have fully unsynchronized TSCs running at different frequencies, so using TSCs there is not a good idea. Also some other x86 boxes have this problem. gettimeofday should be good enough, so just disable it. Signed-off-by: Andi Kleen Signed-off-by: David S. Miller diff --git a/net/sched/Kconfig b/net/sched/Kconfig index 45d3bc0..81510da 100644 --- a/net/sched/Kconfig +++ b/net/sched/Kconfig @@ -72,9 +72,11 @@ config NET_SCH_CLK_GETTIMEOFDAY Choose this if you need a high resolution clock source but can't use the CPU's cycle counter. +# don't allow on SMP x86 because they can have unsynchronized TSCs. +# gettimeofday is a good alternative config NET_SCH_CLK_CPU bool "CPU cycle counter" - depends on X86_TSC || X86_64 || ALPHA || SPARC64 || PPC64 || IA64 + depends on ((X86_TSC || X86_64) && !SMP) || ALPHA || SPARC64 || PPC64 || IA64 help Say Y here if you want to use the CPU's cycle counter as clock source. This is a cheap and high resolution clock source, but on some -- cgit v0.10.2 From eb0d6041143fae63410c5622fef96862e6b20933 Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Thu, 13 Oct 2005 14:42:04 -0700 Subject: [CONNECTOR]: Update documentation to match reality. Updated documentation to reflect 2.6.14 netlink changes about socket options, multicasting and group number. Please concider for 2.6.14. Signed-off-by: Evgeniy Polyakov Signed-off-by: David S. Miller diff --git a/Documentation/connector/connector.txt b/Documentation/connector/connector.txt index 54a0a14..57a314b 100644 --- a/Documentation/connector/connector.txt +++ b/Documentation/connector/connector.txt @@ -131,3 +131,47 @@ Netlink itself is not reliable protocol, that means that messages can be lost due to memory pressure or process' receiving queue overflowed, so caller is warned must be prepared. That is why struct cn_msg [main connector's message header] contains u32 seq and u32 ack fields. + +/*****************************************/ +Userspace usage. +/*****************************************/ +2.6.14 has a new netlink socket implementation, which by default does not +allow to send data to netlink groups other than 1. +So, if to use netlink socket (for example using connector) +with different group number userspace application must subscribe to +that group. It can be achieved by following pseudocode: + +s = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR); + +l_local.nl_family = AF_NETLINK; +l_local.nl_groups = 12345; +l_local.nl_pid = 0; + +if (bind(s, (struct sockaddr *)&l_local, sizeof(struct sockaddr_nl)) == -1) { + perror("bind"); + close(s); + return -1; +} + +{ + int on = l_local.nl_groups; + setsockopt(s, 270, 1, &on, sizeof(on)); +} + +Where 270 above is SOL_NETLINK, and 1 is a NETLINK_ADD_MEMBERSHIP socket +option. To drop multicast subscription one should call above socket option +with NETLINK_DROP_MEMBERSHIP parameter which is defined as 0. + +2.6.14 netlink code only allows to select a group which is less or equal to +the maximum group number, which is used at netlink_kernel_create() time. +In case of connector it is CN_NETLINK_USERS + 0xf, so if you want to use +group number 12345, you must increment CN_NETLINK_USERS to that number. +Additional 0xf numbers are allocated to be used by non-in-kernel users. + +Due to this limitation, group 0xffffffff does not work now, so one can +not use add/remove connector's group notifications, but as far as I know, +only cn_test.c test module used it. + +Some work in netlink area is still being done, so things can be changed in +2.6.15 timeframe, if it will happen, documentation will be updated for that +kernel. -- cgit v0.10.2 From 046d20b73960b7a2474b6d5e920d54c3fd7c23fe Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Thu, 13 Oct 2005 14:42:24 -0700 Subject: [TCP]: Ratelimit debugging warning. Better safe than sorry. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index f37a50e..7114031 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -436,11 +436,13 @@ int tcp_fragment(struct sock *sk, struct sk_buff *skb, u32 len, unsigned int mss u16 flags; if (unlikely(len >= skb->len)) { - printk(KERN_DEBUG "TCP: seg_size=%u, mss=%u, seq=%u, " - "end_seq=%u, skb->len=%u.\n", len, mss_now, - TCP_SKB_CB(skb)->seq, TCP_SKB_CB(skb)->end_seq, - skb->len); - WARN_ON(1); + if (net_ratelimit()) { + printk(KERN_DEBUG "TCP: seg_size=%u, mss=%u, seq=%u, " + "end_seq=%u, skb->len=%u.\n", len, mss_now, + TCP_SKB_CB(skb)->seq, TCP_SKB_CB(skb)->end_seq, + skb->len); + WARN_ON(1); + } return 0; } -- cgit v0.10.2 From 51e8513615ed8202b22ba9a43b0c7376ea4f6868 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 13 Oct 2005 21:10:08 -0700 Subject: [SPARC64]: Consolidate common PCI IOMMU init code. All the PCI controller drivers were doing the same thing setting up the IOMMU software state, put it all in one spot. Signed-off-by: David S. Miller diff --git a/arch/sparc64/kernel/pci_iommu.c b/arch/sparc64/kernel/pci_iommu.c index 425c60c..cdee7d9 100644 --- a/arch/sparc64/kernel/pci_iommu.c +++ b/arch/sparc64/kernel/pci_iommu.c @@ -80,13 +80,59 @@ static void inline iopte_make_dummy(struct pci_iommu *iommu, iopte_t *iopte) iopte_val(*iopte) = val; } -void pci_iommu_table_init(struct pci_iommu *iommu, int tsbsize) +void pci_iommu_table_init(struct pci_iommu *iommu, int tsbsize, u32 dma_offset, u32 dma_addr_mask) { - int i; + unsigned long i, tsbbase, order; + + /* Setup initial software IOMMU state. */ + spin_lock_init(&iommu->lock); + iommu->ctx_lowest_free = 1; + iommu->page_table_map_base = dma_offset; + iommu->dma_addr_mask = dma_addr_mask; + + switch (tsbsize / (8 * 1024)) { + case 64: + iommu->page_table_sz_bits = 16; + break; + case 128: + iommu->page_table_sz_bits = 17; + break; + default: + prom_printf("PCI_IOMMU: Illegal TSB size %d\n", + tsbsize / (8 * 1024)); + prom_halt(); + break; + }; + + iommu->lowest_consistent_map = + 1 << (iommu->page_table_sz_bits - PBM_LOGCLUSTERS); + + for (i = 0; i < PBM_NCLUSTERS; i++) { + iommu->alloc_info[i].flush = 0; + iommu->alloc_info[i].next = 0; + } - tsbsize /= sizeof(iopte_t); + /* Allocate and initialize the dummy page which we + * set inactive IO PTEs to point to. + */ + iommu->dummy_page = __get_free_pages(GFP_KERNEL, 0); + if (!iommu->dummy_page) { + prom_printf("PCI_IOMMU: Error, gfp(dummy_page) failed.\n"); + prom_halt(); + } + memset((void *)iommu->dummy_page, 0, PAGE_SIZE); + iommu->dummy_page_pa = (unsigned long) __pa(iommu->dummy_page); + + /* Now allocate and setup the IOMMU page table itself. */ + order = get_order(tsbsize); + tsbbase = __get_free_pages(GFP_KERNEL, order); + if (!tsbbase) { + prom_printf("PCI_IOMMU: Error, gfp(tsb) failed.\n"); + prom_halt(); + } + iommu->page_table = (iopte_t *)tsbbase; - for (i = 0; i < tsbsize; i++) + for (i = 0; i < tsbsize / sizeof(iopte_t); i++) iopte_make_dummy(iommu, &iommu->page_table[i]); } diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c index 6ed1ef2..c03ed5f 100644 --- a/arch/sparc64/kernel/pci_psycho.c +++ b/arch/sparc64/kernel/pci_psycho.c @@ -1207,13 +1207,9 @@ static void psycho_scan_bus(struct pci_controller_info *p) static void psycho_iommu_init(struct pci_controller_info *p) { struct pci_iommu *iommu = p->pbm_A.iommu; - unsigned long tsbbase, i; + unsigned long i; u64 control; - /* Setup initial software IOMMU state. */ - spin_lock_init(&iommu->lock); - iommu->ctx_lowest_free = 1; - /* Register addresses. */ iommu->iommu_control = p->pbm_A.controller_regs + PSYCHO_IOMMU_CONTROL; iommu->iommu_tsbbase = p->pbm_A.controller_regs + PSYCHO_IOMMU_TSBBASE; @@ -1240,40 +1236,10 @@ static void psycho_iommu_init(struct pci_controller_info *p) /* Leave diag mode enabled for full-flushing done * in pci_iommu.c */ + pci_iommu_table_init(iommu, IO_TSB_SIZE, 0xc0000000, 0xffffffff); - iommu->dummy_page = __get_free_pages(GFP_KERNEL, 0); - if (!iommu->dummy_page) { - prom_printf("PSYCHO_IOMMU: Error, gfp(dummy_page) failed.\n"); - prom_halt(); - } - memset((void *)iommu->dummy_page, 0, PAGE_SIZE); - iommu->dummy_page_pa = (unsigned long) __pa(iommu->dummy_page); - - /* Using assumed page size 8K with 128K entries we need 1MB iommu page - * table (128K ioptes * 8 bytes per iopte). This is - * page order 7 on UltraSparc. - */ - tsbbase = __get_free_pages(GFP_KERNEL, get_order(IO_TSB_SIZE)); - if (!tsbbase) { - prom_printf("PSYCHO_IOMMU: Error, gfp(tsb) failed.\n"); - prom_halt(); - } - iommu->page_table = (iopte_t *)tsbbase; - iommu->page_table_sz_bits = 17; - iommu->page_table_map_base = 0xc0000000; - iommu->dma_addr_mask = 0xffffffff; - pci_iommu_table_init(iommu, IO_TSB_SIZE); - - /* We start with no consistent mappings. */ - iommu->lowest_consistent_map = - 1 << (iommu->page_table_sz_bits - PBM_LOGCLUSTERS); - - for (i = 0; i < PBM_NCLUSTERS; i++) { - iommu->alloc_info[i].flush = 0; - iommu->alloc_info[i].next = 0; - } - - psycho_write(p->pbm_A.controller_regs + PSYCHO_IOMMU_TSBBASE, __pa(tsbbase)); + psycho_write(p->pbm_A.controller_regs + PSYCHO_IOMMU_TSBBASE, + __pa(iommu->page_table)); control = psycho_read(p->pbm_A.controller_regs + PSYCHO_IOMMU_CONTROL); control &= ~(PSYCHO_IOMMU_CTRL_TSBSZ | PSYCHO_IOMMU_CTRL_TBWSZ); @@ -1281,7 +1247,7 @@ static void psycho_iommu_init(struct pci_controller_info *p) psycho_write(p->pbm_A.controller_regs + PSYCHO_IOMMU_CONTROL, control); /* If necessary, hook us up for starfire IRQ translations. */ - if(this_is_starfire) + if (this_is_starfire) p->starfire_cookie = starfire_hookup(p->pbm_A.portid); else p->starfire_cookie = NULL; diff --git a/arch/sparc64/kernel/pci_sabre.c b/arch/sparc64/kernel/pci_sabre.c index 0ee6bd5..da8e136 100644 --- a/arch/sparc64/kernel/pci_sabre.c +++ b/arch/sparc64/kernel/pci_sabre.c @@ -1267,13 +1267,9 @@ static void sabre_iommu_init(struct pci_controller_info *p, u32 dma_mask) { struct pci_iommu *iommu = p->pbm_A.iommu; - unsigned long tsbbase, i, order; + unsigned long i; u64 control; - /* Setup initial software IOMMU state. */ - spin_lock_init(&iommu->lock); - iommu->ctx_lowest_free = 1; - /* Register addresses. */ iommu->iommu_control = p->pbm_A.controller_regs + SABRE_IOMMU_CONTROL; iommu->iommu_tsbbase = p->pbm_A.controller_regs + SABRE_IOMMU_TSBBASE; @@ -1295,26 +1291,10 @@ static void sabre_iommu_init(struct pci_controller_info *p, /* Leave diag mode enabled for full-flushing done * in pci_iommu.c */ + pci_iommu_table_init(iommu, tsbsize * 1024 * 8, dvma_offset, dma_mask); - iommu->dummy_page = __get_free_pages(GFP_KERNEL, 0); - if (!iommu->dummy_page) { - prom_printf("PSYCHO_IOMMU: Error, gfp(dummy_page) failed.\n"); - prom_halt(); - } - memset((void *)iommu->dummy_page, 0, PAGE_SIZE); - iommu->dummy_page_pa = (unsigned long) __pa(iommu->dummy_page); - - tsbbase = __get_free_pages(GFP_KERNEL, order = get_order(tsbsize * 1024 * 8)); - if (!tsbbase) { - prom_printf("SABRE_IOMMU: Error, gfp(tsb) failed.\n"); - prom_halt(); - } - iommu->page_table = (iopte_t *)tsbbase; - iommu->page_table_map_base = dvma_offset; - iommu->dma_addr_mask = dma_mask; - pci_iommu_table_init(iommu, PAGE_SIZE << order); - - sabre_write(p->pbm_A.controller_regs + SABRE_IOMMU_TSBBASE, __pa(tsbbase)); + sabre_write(p->pbm_A.controller_regs + SABRE_IOMMU_TSBBASE, + __pa(iommu->page_table)); control = sabre_read(p->pbm_A.controller_regs + SABRE_IOMMU_CONTROL); control &= ~(SABRE_IOMMUCTRL_TSBSZ | SABRE_IOMMUCTRL_TBWSZ); @@ -1322,11 +1302,9 @@ static void sabre_iommu_init(struct pci_controller_info *p, switch(tsbsize) { case 64: control |= SABRE_IOMMU_TSBSZ_64K; - iommu->page_table_sz_bits = 16; break; case 128: control |= SABRE_IOMMU_TSBSZ_128K; - iommu->page_table_sz_bits = 17; break; default: prom_printf("iommu_init: Illegal TSB size %d\n", tsbsize); @@ -1334,15 +1312,6 @@ static void sabre_iommu_init(struct pci_controller_info *p, break; } sabre_write(p->pbm_A.controller_regs + SABRE_IOMMU_CONTROL, control); - - /* We start with no consistent mappings. */ - iommu->lowest_consistent_map = - 1 << (iommu->page_table_sz_bits - PBM_LOGCLUSTERS); - - for (i = 0; i < PBM_NCLUSTERS; i++) { - iommu->alloc_info[i].flush = 0; - iommu->alloc_info[i].next = 0; - } } static void pbm_register_toplevel_resources(struct pci_controller_info *p, diff --git a/arch/sparc64/kernel/pci_schizo.c b/arch/sparc64/kernel/pci_schizo.c index cae5b61..d8c4e09 100644 --- a/arch/sparc64/kernel/pci_schizo.c +++ b/arch/sparc64/kernel/pci_schizo.c @@ -1765,7 +1765,7 @@ static void schizo_pbm_strbuf_init(struct pci_pbm_info *pbm) static void schizo_pbm_iommu_init(struct pci_pbm_info *pbm) { struct pci_iommu *iommu = pbm->iommu; - unsigned long tsbbase, i, tagbase, database, order; + unsigned long i, tagbase, database; u32 vdma[2], dma_mask; u64 control; int err, tsbsize; @@ -1800,10 +1800,6 @@ static void schizo_pbm_iommu_init(struct pci_pbm_info *pbm) prom_halt(); }; - /* Setup initial software IOMMU state. */ - spin_lock_init(&iommu->lock); - iommu->ctx_lowest_free = 1; - /* Register addresses, SCHIZO has iommu ctx flushing. */ iommu->iommu_control = pbm->pbm_regs + SCHIZO_IOMMU_CONTROL; iommu->iommu_tsbbase = pbm->pbm_regs + SCHIZO_IOMMU_TSBBASE; @@ -1832,56 +1828,9 @@ static void schizo_pbm_iommu_init(struct pci_pbm_info *pbm) /* Leave diag mode enabled for full-flushing done * in pci_iommu.c */ + pci_iommu_table_init(iommu, tsbsize * 8 * 1024, vdma[0], dma_mask); - iommu->dummy_page = __get_free_pages(GFP_KERNEL, 0); - if (!iommu->dummy_page) { - prom_printf("PSYCHO_IOMMU: Error, gfp(dummy_page) failed.\n"); - prom_halt(); - } - memset((void *)iommu->dummy_page, 0, PAGE_SIZE); - iommu->dummy_page_pa = (unsigned long) __pa(iommu->dummy_page); - - /* Using assumed page size 8K with 128K entries we need 1MB iommu page - * table (128K ioptes * 8 bytes per iopte). This is - * page order 7 on UltraSparc. - */ - order = get_order(tsbsize * 8 * 1024); - tsbbase = __get_free_pages(GFP_KERNEL, order); - if (!tsbbase) { - prom_printf("%s: Error, gfp(tsb) failed.\n", pbm->name); - prom_halt(); - } - - iommu->page_table = (iopte_t *)tsbbase; - iommu->page_table_map_base = vdma[0]; - iommu->dma_addr_mask = dma_mask; - pci_iommu_table_init(iommu, PAGE_SIZE << order); - - switch (tsbsize) { - case 64: - iommu->page_table_sz_bits = 16; - break; - - case 128: - iommu->page_table_sz_bits = 17; - break; - - default: - prom_printf("iommu_init: Illegal TSB size %d\n", tsbsize); - prom_halt(); - break; - }; - - /* We start with no consistent mappings. */ - iommu->lowest_consistent_map = - 1 << (iommu->page_table_sz_bits - PBM_LOGCLUSTERS); - - for (i = 0; i < PBM_NCLUSTERS; i++) { - iommu->alloc_info[i].flush = 0; - iommu->alloc_info[i].next = 0; - } - - schizo_write(iommu->iommu_tsbbase, __pa(tsbbase)); + schizo_write(iommu->iommu_tsbbase, __pa(iommu->page_table)); control = schizo_read(iommu->iommu_control); control &= ~(SCHIZO_IOMMU_CTRL_TSBSZ | SCHIZO_IOMMU_CTRL_TBWSZ); diff --git a/include/asm-sparc64/pbm.h b/include/asm-sparc64/pbm.h index 38bbbcc..c067407 100644 --- a/include/asm-sparc64/pbm.h +++ b/include/asm-sparc64/pbm.h @@ -102,7 +102,7 @@ struct pci_iommu { u32 dma_addr_mask; }; -extern void pci_iommu_table_init(struct pci_iommu *, int); +extern void pci_iommu_table_init(struct pci_iommu *iommu, int tsbsize, u32 dma_offset, u32 dma_addr_mask); /* This describes a PCI bus module's streaming buffer. */ struct pci_strbuf { -- cgit v0.10.2 From 688cb30bdc3e398d97682a6a58f825821ee838c2 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 13 Oct 2005 22:15:24 -0700 Subject: [SPARC64]: Eliminate PCI IOMMU dma mapping size limit. The hairy fast allocator in the sparc64 PCI IOMMU code has a hard limit of 256 pages. Certain devices can exceed this when performing very large I/Os. So replace with a more simple allocator, based largely upon the arch/ppc64/kernel/iommu.c code. Signed-off-by: David S. Miller diff --git a/arch/sparc64/kernel/pci_iommu.c b/arch/sparc64/kernel/pci_iommu.c index cdee7d9..a11910b 100644 --- a/arch/sparc64/kernel/pci_iommu.c +++ b/arch/sparc64/kernel/pci_iommu.c @@ -49,12 +49,6 @@ static void __iommu_flushall(struct pci_iommu *iommu) /* Ensure completion of previous PIO writes. */ (void) pci_iommu_read(iommu->write_complete_reg); - - /* Now update everyone's flush point. */ - for (entry = 0; entry < PBM_NCLUSTERS; entry++) { - iommu->alloc_info[entry].flush = - iommu->alloc_info[entry].next; - } } #define IOPTE_CONSISTENT(CTX) \ @@ -80,9 +74,61 @@ static void inline iopte_make_dummy(struct pci_iommu *iommu, iopte_t *iopte) iopte_val(*iopte) = val; } +/* Based largely upon the ppc64 iommu allocator. */ +static long pci_arena_alloc(struct pci_iommu *iommu, unsigned long npages) +{ + struct pci_iommu_arena *arena = &iommu->arena; + unsigned long n, i, start, end, limit; + int pass; + + limit = arena->limit; + start = arena->hint; + pass = 0; + +again: + n = find_next_zero_bit(arena->map, limit, start); + end = n + npages; + if (unlikely(end >= limit)) { + if (likely(pass < 1)) { + limit = start; + start = 0; + __iommu_flushall(iommu); + pass++; + goto again; + } else { + /* Scanned the whole thing, give up. */ + return -1; + } + } + + for (i = n; i < end; i++) { + if (test_bit(i, arena->map)) { + start = i + 1; + goto again; + } + } + + for (i = n; i < end; i++) + __set_bit(i, arena->map); + + arena->hint = end; + + return n; +} + +static void pci_arena_free(struct pci_iommu_arena *arena, unsigned long base, unsigned long npages) +{ + unsigned long i; + + for (i = base; i < (base + npages); i++) + __clear_bit(i, arena->map); +} + void pci_iommu_table_init(struct pci_iommu *iommu, int tsbsize, u32 dma_offset, u32 dma_addr_mask) { - unsigned long i, tsbbase, order; + unsigned long i, tsbbase, order, sz, num_tsb_entries; + + num_tsb_entries = tsbsize / sizeof(iopte_t); /* Setup initial software IOMMU state. */ spin_lock_init(&iommu->lock); @@ -90,27 +136,16 @@ void pci_iommu_table_init(struct pci_iommu *iommu, int tsbsize, u32 dma_offset, iommu->page_table_map_base = dma_offset; iommu->dma_addr_mask = dma_addr_mask; - switch (tsbsize / (8 * 1024)) { - case 64: - iommu->page_table_sz_bits = 16; - break; - case 128: - iommu->page_table_sz_bits = 17; - break; - default: - prom_printf("PCI_IOMMU: Illegal TSB size %d\n", - tsbsize / (8 * 1024)); + /* Allocate and initialize the free area map. */ + sz = num_tsb_entries / 8; + sz = (sz + 7UL) & ~7UL; + iommu->arena.map = kmalloc(sz, GFP_KERNEL); + if (!iommu->arena.map) { + prom_printf("PCI_IOMMU: Error, kmalloc(arena.map) failed.\n"); prom_halt(); - break; - }; - - iommu->lowest_consistent_map = - 1 << (iommu->page_table_sz_bits - PBM_LOGCLUSTERS); - - for (i = 0; i < PBM_NCLUSTERS; i++) { - iommu->alloc_info[i].flush = 0; - iommu->alloc_info[i].next = 0; } + memset(iommu->arena.map, 0, sz); + iommu->arena.limit = num_tsb_entries; /* Allocate and initialize the dummy page which we * set inactive IO PTEs to point to. @@ -132,114 +167,24 @@ void pci_iommu_table_init(struct pci_iommu *iommu, int tsbsize, u32 dma_offset, } iommu->page_table = (iopte_t *)tsbbase; - for (i = 0; i < tsbsize / sizeof(iopte_t); i++) + for (i = 0; i < num_tsb_entries; i++) iopte_make_dummy(iommu, &iommu->page_table[i]); } -static iopte_t *alloc_streaming_cluster(struct pci_iommu *iommu, unsigned long npages) +static inline iopte_t *alloc_npages(struct pci_iommu *iommu, unsigned long npages) { - iopte_t *iopte, *limit, *first; - unsigned long cnum, ent, flush_point; - - cnum = 0; - while ((1UL << cnum) < npages) - cnum++; - iopte = (iommu->page_table + - (cnum << (iommu->page_table_sz_bits - PBM_LOGCLUSTERS))); - - if (cnum == 0) - limit = (iommu->page_table + - iommu->lowest_consistent_map); - else - limit = (iopte + - (1 << (iommu->page_table_sz_bits - PBM_LOGCLUSTERS))); + long entry; - iopte += ((ent = iommu->alloc_info[cnum].next) << cnum); - flush_point = iommu->alloc_info[cnum].flush; - - first = iopte; - for (;;) { - if (IOPTE_IS_DUMMY(iommu, iopte)) { - if ((iopte + (1 << cnum)) >= limit) - ent = 0; - else - ent = ent + 1; - iommu->alloc_info[cnum].next = ent; - if (ent == flush_point) - __iommu_flushall(iommu); - break; - } - iopte += (1 << cnum); - ent++; - if (iopte >= limit) { - iopte = (iommu->page_table + - (cnum << - (iommu->page_table_sz_bits - PBM_LOGCLUSTERS))); - ent = 0; - } - if (ent == flush_point) - __iommu_flushall(iommu); - if (iopte == first) - goto bad; - } - - /* I've got your streaming cluster right here buddy boy... */ - return iopte; + entry = pci_arena_alloc(iommu, npages); + if (unlikely(entry < 0)) + return NULL; -bad: - printk(KERN_EMERG "pci_iommu: alloc_streaming_cluster of npages(%ld) failed!\n", - npages); - return NULL; + return iommu->page_table + entry; } -static void free_streaming_cluster(struct pci_iommu *iommu, dma_addr_t base, - unsigned long npages, unsigned long ctx) +static inline void free_npages(struct pci_iommu *iommu, dma_addr_t base, unsigned long npages) { - unsigned long cnum, ent; - - cnum = 0; - while ((1UL << cnum) < npages) - cnum++; - - ent = (base << (32 - IO_PAGE_SHIFT + PBM_LOGCLUSTERS - iommu->page_table_sz_bits)) - >> (32 + PBM_LOGCLUSTERS + cnum - iommu->page_table_sz_bits); - - /* If the global flush might not have caught this entry, - * adjust the flush point such that we will flush before - * ever trying to reuse it. - */ -#define between(X,Y,Z) (((Z) - (Y)) >= ((X) - (Y))) - if (between(ent, iommu->alloc_info[cnum].next, iommu->alloc_info[cnum].flush)) - iommu->alloc_info[cnum].flush = ent; -#undef between -} - -/* We allocate consistent mappings from the end of cluster zero. */ -static iopte_t *alloc_consistent_cluster(struct pci_iommu *iommu, unsigned long npages) -{ - iopte_t *iopte; - - iopte = iommu->page_table + (1 << (iommu->page_table_sz_bits - PBM_LOGCLUSTERS)); - while (iopte > iommu->page_table) { - iopte--; - if (IOPTE_IS_DUMMY(iommu, iopte)) { - unsigned long tmp = npages; - - while (--tmp) { - iopte--; - if (!IOPTE_IS_DUMMY(iommu, iopte)) - break; - } - if (tmp == 0) { - u32 entry = (iopte - iommu->page_table); - - if (entry < iommu->lowest_consistent_map) - iommu->lowest_consistent_map = entry; - return iopte; - } - } - } - return NULL; + pci_arena_free(&iommu->arena, base >> IO_PAGE_SHIFT, npages); } static int iommu_alloc_ctx(struct pci_iommu *iommu) @@ -279,7 +224,7 @@ void *pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_ad struct pcidev_cookie *pcp; struct pci_iommu *iommu; iopte_t *iopte; - unsigned long flags, order, first_page, ctx; + unsigned long flags, order, first_page; void *ret; int npages; @@ -297,9 +242,10 @@ void *pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_ad iommu = pcp->pbm->iommu; spin_lock_irqsave(&iommu->lock, flags); - iopte = alloc_consistent_cluster(iommu, size >> IO_PAGE_SHIFT); - if (iopte == NULL) { - spin_unlock_irqrestore(&iommu->lock, flags); + iopte = alloc_npages(iommu, size >> IO_PAGE_SHIFT); + spin_unlock_irqrestore(&iommu->lock, flags); + + if (unlikely(iopte == NULL)) { free_pages(first_page, order); return NULL; } @@ -308,31 +254,15 @@ void *pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_ad ((iopte - iommu->page_table) << IO_PAGE_SHIFT)); ret = (void *) first_page; npages = size >> IO_PAGE_SHIFT; - ctx = 0; - if (iommu->iommu_ctxflush) - ctx = iommu_alloc_ctx(iommu); first_page = __pa(first_page); while (npages--) { - iopte_val(*iopte) = (IOPTE_CONSISTENT(ctx) | + iopte_val(*iopte) = (IOPTE_CONSISTENT(0UL) | IOPTE_WRITE | (first_page & IOPTE_PAGE)); iopte++; first_page += IO_PAGE_SIZE; } - { - int i; - u32 daddr = *dma_addrp; - - npages = size >> IO_PAGE_SHIFT; - for (i = 0; i < npages; i++) { - pci_iommu_write(iommu->iommu_flush, daddr); - daddr += IO_PAGE_SIZE; - } - } - - spin_unlock_irqrestore(&iommu->lock, flags); - return ret; } @@ -342,7 +272,7 @@ void pci_free_consistent(struct pci_dev *pdev, size_t size, void *cpu, dma_addr_ struct pcidev_cookie *pcp; struct pci_iommu *iommu; iopte_t *iopte; - unsigned long flags, order, npages, i, ctx; + unsigned long flags, order, npages; npages = IO_PAGE_ALIGN(size) >> IO_PAGE_SHIFT; pcp = pdev->sysdata; @@ -352,46 +282,7 @@ void pci_free_consistent(struct pci_dev *pdev, size_t size, void *cpu, dma_addr_ spin_lock_irqsave(&iommu->lock, flags); - if ((iopte - iommu->page_table) == - iommu->lowest_consistent_map) { - iopte_t *walk = iopte + npages; - iopte_t *limit; - - limit = (iommu->page_table + - (1 << (iommu->page_table_sz_bits - PBM_LOGCLUSTERS))); - while (walk < limit) { - if (!IOPTE_IS_DUMMY(iommu, walk)) - break; - walk++; - } - iommu->lowest_consistent_map = - (walk - iommu->page_table); - } - - /* Data for consistent mappings cannot enter the streaming - * buffers, so we only need to update the TSB. We flush - * the IOMMU here as well to prevent conflicts with the - * streaming mapping deferred tlb flush scheme. - */ - - ctx = 0; - if (iommu->iommu_ctxflush) - ctx = (iopte_val(*iopte) & IOPTE_CONTEXT) >> 47UL; - - for (i = 0; i < npages; i++, iopte++) - iopte_make_dummy(iommu, iopte); - - if (iommu->iommu_ctxflush) { - pci_iommu_write(iommu->iommu_ctxflush, ctx); - } else { - for (i = 0; i < npages; i++) { - u32 daddr = dvma + (i << IO_PAGE_SHIFT); - - pci_iommu_write(iommu->iommu_flush, daddr); - } - } - - iommu_free_ctx(iommu, ctx); + free_npages(iommu, dvma, npages); spin_unlock_irqrestore(&iommu->lock, flags); @@ -418,25 +309,27 @@ dma_addr_t pci_map_single(struct pci_dev *pdev, void *ptr, size_t sz, int direct iommu = pcp->pbm->iommu; strbuf = &pcp->pbm->stc; - if (direction == PCI_DMA_NONE) - BUG(); + if (unlikely(direction == PCI_DMA_NONE)) + goto bad_no_ctx; oaddr = (unsigned long)ptr; npages = IO_PAGE_ALIGN(oaddr + sz) - (oaddr & IO_PAGE_MASK); npages >>= IO_PAGE_SHIFT; spin_lock_irqsave(&iommu->lock, flags); + base = alloc_npages(iommu, npages); + ctx = 0; + if (iommu->iommu_ctxflush) + ctx = iommu_alloc_ctx(iommu); + spin_unlock_irqrestore(&iommu->lock, flags); - base = alloc_streaming_cluster(iommu, npages); - if (base == NULL) + if (unlikely(!base)) goto bad; + bus_addr = (iommu->page_table_map_base + ((base - iommu->page_table) << IO_PAGE_SHIFT)); ret = bus_addr | (oaddr & ~IO_PAGE_MASK); base_paddr = __pa(oaddr & IO_PAGE_MASK); - ctx = 0; - if (iommu->iommu_ctxflush) - ctx = iommu_alloc_ctx(iommu); if (strbuf->strbuf_enabled) iopte_protection = IOPTE_STREAMING(ctx); else @@ -447,12 +340,13 @@ dma_addr_t pci_map_single(struct pci_dev *pdev, void *ptr, size_t sz, int direct for (i = 0; i < npages; i++, base++, base_paddr += IO_PAGE_SIZE) iopte_val(*base) = iopte_protection | base_paddr; - spin_unlock_irqrestore(&iommu->lock, flags); - return ret; bad: - spin_unlock_irqrestore(&iommu->lock, flags); + iommu_free_ctx(iommu, ctx); +bad_no_ctx: + if (printk_ratelimit()) + WARN_ON(1); return PCI_DMA_ERROR_CODE; } @@ -527,10 +421,13 @@ void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int struct pci_iommu *iommu; struct pci_strbuf *strbuf; iopte_t *base; - unsigned long flags, npages, ctx; + unsigned long flags, npages, ctx, i; - if (direction == PCI_DMA_NONE) - BUG(); + if (unlikely(direction == PCI_DMA_NONE)) { + if (printk_ratelimit()) + WARN_ON(1); + return; + } pcp = pdev->sysdata; iommu = pcp->pbm->iommu; @@ -556,13 +453,14 @@ void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int /* Step 1: Kick data out of streaming buffers if necessary. */ if (strbuf->strbuf_enabled) - pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction); + pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, + npages, direction); - /* Step 2: Clear out first TSB entry. */ - iopte_make_dummy(iommu, base); + /* Step 2: Clear out TSB entries. */ + for (i = 0; i < npages; i++) + iopte_make_dummy(iommu, base + i); - free_streaming_cluster(iommu, bus_addr - iommu->page_table_map_base, - npages, ctx); + free_npages(iommu, bus_addr - iommu->page_table_map_base, npages); iommu_free_ctx(iommu, ctx); @@ -667,6 +565,8 @@ int pci_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int pci_map_single(pdev, (page_address(sglist->page) + sglist->offset), sglist->length, direction); + if (unlikely(sglist->dma_address == PCI_DMA_ERROR_CODE)) + return 0; sglist->dma_length = sglist->length; return 1; } @@ -675,21 +575,29 @@ int pci_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int iommu = pcp->pbm->iommu; strbuf = &pcp->pbm->stc; - if (direction == PCI_DMA_NONE) - BUG(); + if (unlikely(direction == PCI_DMA_NONE)) + goto bad_no_ctx; /* Step 1: Prepare scatter list. */ npages = prepare_sg(sglist, nelems); - /* Step 2: Allocate a cluster. */ + /* Step 2: Allocate a cluster and context, if necessary. */ spin_lock_irqsave(&iommu->lock, flags); - base = alloc_streaming_cluster(iommu, npages); + base = alloc_npages(iommu, npages); + ctx = 0; + if (iommu->iommu_ctxflush) + ctx = iommu_alloc_ctx(iommu); + + spin_unlock_irqrestore(&iommu->lock, flags); + if (base == NULL) goto bad; - dma_base = iommu->page_table_map_base + ((base - iommu->page_table) << IO_PAGE_SHIFT); + + dma_base = iommu->page_table_map_base + + ((base - iommu->page_table) << IO_PAGE_SHIFT); /* Step 3: Normalize DMA addresses. */ used = nelems; @@ -702,30 +610,28 @@ int pci_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int } used = nelems - used; - /* Step 4: Choose a context if necessary. */ - ctx = 0; - if (iommu->iommu_ctxflush) - ctx = iommu_alloc_ctx(iommu); - - /* Step 5: Create the mappings. */ + /* Step 4: Create the mappings. */ if (strbuf->strbuf_enabled) iopte_protection = IOPTE_STREAMING(ctx); else iopte_protection = IOPTE_CONSISTENT(ctx); if (direction != PCI_DMA_TODEVICE) iopte_protection |= IOPTE_WRITE; - fill_sg (base, sglist, used, nelems, iopte_protection); + + fill_sg(base, sglist, used, nelems, iopte_protection); + #ifdef VERIFY_SG verify_sglist(sglist, nelems, base, npages); #endif - spin_unlock_irqrestore(&iommu->lock, flags); - return used; bad: - spin_unlock_irqrestore(&iommu->lock, flags); - return PCI_DMA_ERROR_CODE; + iommu_free_ctx(iommu, ctx); +bad_no_ctx: + if (printk_ratelimit()) + WARN_ON(1); + return 0; } /* Unmap a set of streaming mode DMA translations. */ @@ -738,8 +644,10 @@ void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, unsigned long flags, ctx, i, npages; u32 bus_addr; - if (direction == PCI_DMA_NONE) - BUG(); + if (unlikely(direction == PCI_DMA_NONE)) { + if (printk_ratelimit()) + WARN_ON(1); + } pcp = pdev->sysdata; iommu = pcp->pbm->iommu; @@ -751,7 +659,8 @@ void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, if (sglist[i].dma_length == 0) break; i--; - npages = (IO_PAGE_ALIGN(sglist[i].dma_address + sglist[i].dma_length) - bus_addr) >> IO_PAGE_SHIFT; + npages = (IO_PAGE_ALIGN(sglist[i].dma_address + sglist[i].dma_length) - + bus_addr) >> IO_PAGE_SHIFT; base = iommu->page_table + ((bus_addr - iommu->page_table_map_base) >> IO_PAGE_SHIFT); @@ -772,11 +681,11 @@ void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, if (strbuf->strbuf_enabled) pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction); - /* Step 2: Clear out first TSB entry. */ - iopte_make_dummy(iommu, base); + /* Step 2: Clear out the TSB entries. */ + for (i = 0; i < npages; i++) + iopte_make_dummy(iommu, base + i); - free_streaming_cluster(iommu, bus_addr - iommu->page_table_map_base, - npages, ctx); + free_npages(iommu, bus_addr - iommu->page_table_map_base, npages); iommu_free_ctx(iommu, ctx); diff --git a/include/asm-sparc64/pbm.h b/include/asm-sparc64/pbm.h index c067407..dd35a2c 100644 --- a/include/asm-sparc64/pbm.h +++ b/include/asm-sparc64/pbm.h @@ -27,23 +27,27 @@ * PCI bus. */ -#define PBM_LOGCLUSTERS 3 -#define PBM_NCLUSTERS (1 << PBM_LOGCLUSTERS) - struct pci_controller_info; /* This contains the software state necessary to drive a PCI * controller's IOMMU. */ +struct pci_iommu_arena { + unsigned long *map; + unsigned int hint; + unsigned int limit; +}; + struct pci_iommu { /* This protects the controller's IOMMU and all * streaming buffers underneath. */ spinlock_t lock; + struct pci_iommu_arena arena; + /* IOMMU page table, a linear array of ioptes. */ iopte_t *page_table; /* The page table itself. */ - int page_table_sz_bits; /* log2 of ow many pages does it map? */ /* Base PCI memory space address where IOMMU mappings * begin. @@ -62,12 +66,6 @@ struct pci_iommu { */ unsigned long write_complete_reg; - /* The lowest used consistent mapping entry. Since - * we allocate consistent maps out of cluster 0 this - * is relative to the beginning of closter 0. - */ - u32 lowest_consistent_map; - /* In order to deal with some buggy third-party PCI bridges that * do wrong prefetching, we never mark valid mappings as invalid. * Instead we point them at this dummy page. @@ -75,16 +73,6 @@ struct pci_iommu { unsigned long dummy_page; unsigned long dummy_page_pa; - /* If PBM_NCLUSTERS is ever decreased to 4 or lower, - * or if largest supported page_table_sz * 8K goes above - * 2GB, you must increase the size of the type of - * these counters. You have been duly warned. -DaveM - */ - struct { - u16 next; - u16 flush; - } alloc_info[PBM_NCLUSTERS]; - /* CTX allocation. */ unsigned long ctx_lowest_free; unsigned long ctx_bitmap[IOMMU_NUM_CTXS / (sizeof(unsigned long) * 8)]; -- cgit v0.10.2 From 6205d158d16d2619bf30f0aff47a8e09b07106e9 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 14 Oct 2005 12:24:24 +0100 Subject: [ARM] 3009/1: S3C2410 - io.h offsets too large for LDRH/STRH Patch from Ben Dooks The __inwc/__outwc calls are capable of creating LDRH and STRH instructions with offsets over 8bits as GCC does not have a constraint for an 8bit offset. Signed-off-by: Ben Dooks Signed-off-by: Russell King diff --git a/include/asm-arm/arch-s3c2410/io.h b/include/asm-arm/arch-s3c2410/io.h index 418233a..4bf272e 100644 --- a/include/asm-arm/arch-s3c2410/io.h +++ b/include/asm-arm/arch-s3c2410/io.h @@ -9,7 +9,7 @@ * 06-Dec-1997 RMK Created. * 02-Sep-2003 BJD Modified for S3C2410 * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA - * + * 13-Oct-2005 BJD Fixed problems with LDRH/STRH offset range */ #ifndef __ASM_ARM_ARCH_IO_H @@ -97,7 +97,7 @@ DECLARE_IO(int,l,"") else \ __asm__ __volatile__( \ "strb %0, [%1, #0] @ outbc" \ - : : "r" (value), "r" ((port))); \ + : : "r" (value), "r" ((port))); \ }) #define __inbc(port) \ @@ -110,35 +110,61 @@ DECLARE_IO(int,l,"") else \ __asm__ __volatile__( \ "ldrb %0, [%1, #0] @ inbc" \ - : "=r" (result) : "r" ((port))); \ + : "=r" (result) : "r" ((port))); \ result; \ }) #define __outwc(value,port) \ ({ \ unsigned long v = value; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "strh %0, [%1, %2] @ outwc" \ - : : "r" (v), "r" (PCIO_BASE), "Jr" ((port))); \ - else \ + if (__PORT_PCIO((port))) { \ + if ((port) < 256 && (port) > -256) \ + __asm__ __volatile__( \ + "strh %0, [%1, %2] @ outwc" \ + : : "r" (v), "r" (PCIO_BASE), "Jr" ((port))); \ + else if ((port) > 0) \ + __asm__ __volatile__( \ + "strh %0, [%1, %2] @ outwc" \ + : : "r" (v), \ + "r" (PCIO_BASE + ((port) & ~0xff)), \ + "Jr" (((port) & 0xff))); \ + else \ + __asm__ __volatile__( \ + "strh %0, [%1, #0] @ outwc" \ + : : "r" (v), \ + "r" (PCIO_BASE + (port))); \ + } else \ __asm__ __volatile__( \ "strh %0, [%1, #0] @ outwc" \ - : : "r" (v), "r" ((port))); \ + : : "r" (v), "r" ((port))); \ }) #define __inwc(port) \ ({ \ unsigned short result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldrh %0, [%1, %2] @ inwc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port))); \ - else \ + if (__PORT_PCIO((port))) { \ + if ((port) < 256 && (port) > -256 ) \ + __asm__ __volatile__( \ + "ldrh %0, [%1, %2] @ inwc" \ + : "=r" (result) \ + : "r" (PCIO_BASE), \ + "Jr" ((port))); \ + else if ((port) > 0) \ + __asm__ __volatile__( \ + "ldrh %0, [%1, %2] @ inwc" \ + : "=r" (result) \ + : "r" (PCIO_BASE + ((port) & ~0xff)), \ + "Jr" (((port) & 0xff))); \ + else \ + __asm__ __volatile__( \ + "ldrh %0, [%1, #0] @ inwc" \ + : "=r" (result) \ + : "r" (PCIO_BASE + ((port)))); \ + } else \ __asm__ __volatile__( \ "ldrh %0, [%1, #0] @ inwc" \ - : "=r" (result) : "r" ((port))); \ - result; \ + : "=r" (result) : "r" ((port))); \ + result; \ }) #define __outlc(value,port) \ -- cgit v0.10.2 From cb90d681ae439e525de9de519508ac9041342321 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Fri, 14 Oct 2005 12:49:15 +0100 Subject: [ARM] 2980/1: Fix L7200 core.c compile Patch from Deepak Saxena This patch fixes L7200 so that it builds in 2.6.latest. I do not have the hardware so don't know if it actually still works, but the changes are fairly trivial. I am not even sure if anyone still maintains, uses, or cares about this machine type. Signed-off-by: Deepak Saxena Signed-off-by: Russell King diff --git a/arch/arm/mach-l7200/core.c b/arch/arm/mach-l7200/core.c index 5fd8c9f..03ed742 100644 --- a/arch/arm/mach-l7200/core.c +++ b/arch/arm/mach-l7200/core.c @@ -7,11 +7,17 @@ */ #include #include +#include +#include +#include +#include #include #include +#include #include +#include /* * IRQ base register @@ -47,6 +53,12 @@ static void l7200_unmask_irq(unsigned int irq) { IRQ_ENABLE = 1 << irq; } + +static struct irqchip l7200_irq_chip = { + .ack = l7200_mask_irq, + .mask = l7200_mask_irq, + .unmask = l7200_unmask_irq +}; static void __init l7200_init_irq(void) { @@ -56,11 +68,9 @@ static void __init l7200_init_irq(void) FIQ_ENABLECLEAR = 0xffffffff; /* clear all fast interrupt enables */ for (irq = 0; irq < NR_IRQS; irq++) { - irq_desc[irq].valid = 1; - irq_desc[irq].probe_ok = 1; - irq_desc[irq].mask_ack = l7200_mask_irq; - irq_desc[irq].mask = l7200_mask_irq; - irq_desc[irq].unmask = l7200_unmask_irq; + set_irq_chip(irq, &l7200_irq_chip); + set_irq_flags(irq, IRQF_VALID); + set_irq_handler(irq, do_level_IRQ); } init_FIQ(); -- cgit v0.10.2 From 04f03bf7dbd04c15c30d91c6a277f6970cc4ef14 Mon Sep 17 00:00:00 2001 From: Baris Cicek Date: Fri, 14 Oct 2005 14:32:40 +0100 Subject: [SERIAL] Add SupraExpress 336i Sp ASVD modem ID Signed-off-by: Russell King diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c index 6b321e8..c2786fc 100644 --- a/drivers/serial/8250_pnp.c +++ b/drivers/serial/8250_pnp.c @@ -272,6 +272,8 @@ static const struct pnp_device_id pnp_dev_table[] = { { "SUP1421", 0 }, /* SupraExpress 33.6 Data/Fax PnP modem */ { "SUP1590", 0 }, + /* SupraExpress 336i Sp ASVD */ + { "SUP1620", 0 }, /* SupraExpress 33.6 Data/Fax PnP modem */ { "SUP1760", 0 }, /* Phoebe Micro */ -- cgit v0.10.2 From cb38c569e5ecf9e922e66963b6da2751b4f13d81 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Fri, 14 Oct 2005 16:07:25 +0100 Subject: [ARM] 3011/1: pxafb: Add ability to set device parent + fix spitz compile error Patch from Richard Purdie Add a function to allow machines to set the parent of the pxa framebuffer device. This means the power up/down sequence can be controlled where required by the machine. Update spitz to use the new function, fixing a compile error. Signed-off-by: Richard Purdie Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index d0660a8..d327c12 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -208,6 +208,11 @@ static struct platform_device pxafb_device = { .resource = pxafb_resources, }; +void __init set_pxa_fb_parent(struct device *parent_dev) +{ + pxafb_device.dev.parent = parent_dev; +} + static struct platform_device ffuart_device = { .name = "pxa2xx-uart", .id = 0, diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 568afe3..7eaeb24 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -328,7 +328,7 @@ static void __init common_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); pxa_set_mci_info(&spitz_mci_platform_data); - pxafb_device.dev.parent = &spitzssp_device.dev; + set_pxa_fb_parent(&spitzssp_device.dev); set_pxa_fb_info(&spitz_pxafb_info); } diff --git a/include/asm-arm/arch-pxa/pxafb.h b/include/asm-arm/arch-pxa/pxafb.h index 21c0e16..aba9b30 100644 --- a/include/asm-arm/arch-pxa/pxafb.h +++ b/include/asm-arm/arch-pxa/pxafb.h @@ -66,4 +66,5 @@ struct pxafb_mach_info { }; void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info); +void set_pxa_fb_parent(struct device *parent_dev); unsigned long pxafb_get_hsync_time(struct device *dev); -- cgit v0.10.2 From 10f92eb7c6b4e8069c2defd2ad23b74f31f8962d Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Fri, 14 Oct 2005 16:07:26 +0100 Subject: [ARM] 3012/1: Corgi/Spitz LCD: Use bus_find_device to locate pxafb - fix compile error Patch from Richard Purdie Update corgi_lcd to use bus_find_device to locate the pxafb device hence fixing a compile error. Signed-off-by: Richard Purdie Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c index c02ef7c..850538f 100644 --- a/arch/arm/mach-pxa/corgi_lcd.c +++ b/arch/arm/mach-pxa/corgi_lcd.c @@ -467,6 +467,7 @@ void corgi_put_hsync(void) { if (get_hsync_time) symbol_put(w100fb_get_hsynclen); + get_hsync_time = NULL; } void corgi_wait_hsync(void) @@ -476,20 +477,37 @@ void corgi_wait_hsync(void) #endif #ifdef CONFIG_PXA_SHARP_Cxx00 +static struct device *spitz_pxafb_dev; + +static int is_pxafb_device(struct device * dev, void * data) +{ + struct platform_device *pdev = container_of(dev, struct platform_device, dev); + + return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0); +} + unsigned long spitz_get_hsync_len(void) { + if (!spitz_pxafb_dev) { + spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device); + if (!spitz_pxafb_dev) + return 0; + } if (!get_hsync_time) get_hsync_time = symbol_get(pxafb_get_hsync_time); if (!get_hsync_time) return 0; - return pxafb_get_hsync_time(&pxafb_device.dev); + return pxafb_get_hsync_time(spitz_pxafb_dev); } void spitz_put_hsync(void) { + put_device(spitz_pxafb_dev); if (get_hsync_time) symbol_put(pxafb_get_hsync_time); + spitz_pxafb_dev = NULL; + get_hsync_time = NULL; } void spitz_wait_hsync(void) -- cgit v0.10.2 From 72023b63cc512d2d7c2a31c6bc1be497eafbd834 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Fri, 14 Oct 2005 16:07:27 +0100 Subject: [ARM] 3013/1: Spitz: Fix compile errors Patch from Richard Purdie Remove a couple of lines of accidently added code causing compile errors. Signed-off-by: Richard Purdie Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 7eaeb24..d0ab428 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -36,7 +36,6 @@ #include #include #include -#include #include #include #include @@ -304,7 +303,6 @@ static struct platform_device *devices[] __initdata = { &spitzkbd_device, &spitzts_device, &spitzbl_device, - &spitzbattery_device, }; static void __init common_init(void) -- cgit v0.10.2 From 414894938b88c1ad2e9cea6502ceccefb30605c4 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Fri, 14 Oct 2005 16:07:28 +0100 Subject: [ARM] 3014/1: Spitz keyboard: Correct the right shift key Patch from Richard Purdie Correct the right shift key entry in the spitz keyboard driver. Signed-off-by: Richard Purdie Signed-off-by: Russell King diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c index 1714045..344f460 100644 --- a/drivers/input/keyboard/spitzkbd.c +++ b/drivers/input/keyboard/spitzkbd.c @@ -53,7 +53,7 @@ static unsigned char spitzkbd_keycode[NR_SCANCODES] = { KEY_LEFTCTRL, KEY_1, KEY_3, KEY_5, KEY_6, KEY_7, KEY_9, KEY_0, KEY_BACKSPACE, SPITZ_KEY_EXOK, SPITZ_KEY_EXCANCEL, 0, 0, 0, 0, 0, /* 1-16 */ 0, KEY_2, KEY_4, KEY_R, KEY_Y, KEY_8, KEY_I, KEY_O, KEY_P, SPITZ_KEY_EXJOGDOWN, SPITZ_KEY_EXJOGUP, 0, 0, 0, 0, 0, /* 17-32 */ KEY_TAB, KEY_Q, KEY_E, KEY_T, KEY_G, KEY_U, KEY_J, KEY_K, 0, 0, 0, 0, 0, 0, 0, 0, /* 33-48 */ - SPITZ_KEY_CALENDER, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, /* 49-64 */ + SPITZ_KEY_CALENDER, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0, /* 49-64 */ SPITZ_KEY_ADDRESS, KEY_A, KEY_D, KEY_C, KEY_B, KEY_N, KEY_DOT, 0, KEY_ENTER, KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0, /* 65-80 */ SPITZ_KEY_MAIL, KEY_Z, KEY_X, KEY_MINUS, KEY_SPACE, KEY_COMMA, 0, KEY_UP, 0, 0, SPITZ_KEY_FN, 0, 0, 0, 0, 0, /* 81-96 */ KEY_SYSRQ, SPITZ_KEY_JAP1, SPITZ_KEY_JAP2, SPITZ_KEY_CANCEL, SPITZ_KEY_OK, SPITZ_KEY_MENU, KEY_LEFT, KEY_DOWN, KEY_RIGHT, 0, 0, 0, 0, 0, 0, 0 /* 97-112 */ -- cgit v0.10.2 From f75884d28a6eae5a422d0454b982da3842f777af Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 14 Oct 2005 13:44:32 -0700 Subject: [QLOGICPTI]: Handle INQUIRY response sniffing correctly. These days, in 2.6.x, even INQUIRY commands are sent using scatter gather lists. Bug reported by Tom 'spot' Callaway. Signed-off-by: David S. Miller diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c index a917ab7..1fd5fc6 100644 --- a/drivers/scsi/qlogicpti.c +++ b/drivers/scsi/qlogicpti.c @@ -1119,6 +1119,36 @@ static inline void update_can_queue(struct Scsi_Host *host, u_int in_ptr, u_int host->sg_tablesize = QLOGICPTI_MAX_SG(num_free); } +static unsigned int scsi_rbuf_get(struct scsi_cmnd *cmd, unsigned char **buf_out) +{ + unsigned char *buf; + unsigned int buflen; + + if (cmd->use_sg) { + struct scatterlist *sg; + + sg = (struct scatterlist *) cmd->request_buffer; + buf = kmap_atomic(sg->page, KM_IRQ0) + sg->offset; + buflen = sg->length; + } else { + buf = cmd->request_buffer; + buflen = cmd->request_bufflen; + } + + *buf_out = buf; + return buflen; +} + +static void scsi_rbuf_put(struct scsi_cmnd *cmd, unsigned char *buf) +{ + if (cmd->use_sg) { + struct scatterlist *sg; + + sg = (struct scatterlist *) cmd->request_buffer; + kunmap_atomic(buf - sg->offset, KM_IRQ0); + } +} + /* * Until we scan the entire bus with inquiries, go throught this fella... */ @@ -1145,11 +1175,9 @@ static void ourdone(struct scsi_cmnd *Cmnd) int ok = host_byte(Cmnd->result) == DID_OK; if (Cmnd->cmnd[0] == 0x12 && ok) { unsigned char *iqd; + unsigned int iqd_len; - if (Cmnd->use_sg != 0) - BUG(); - - iqd = ((unsigned char *)Cmnd->buffer); + iqd_len = scsi_rbuf_get(Cmnd, &iqd); /* tags handled in midlayer */ /* enable sync mode? */ @@ -1163,6 +1191,9 @@ static void ourdone(struct scsi_cmnd *Cmnd) if (iqd[7] & 0x20) { qpti->dev_param[tgt].device_flags |= 0x20; } + + scsi_rbuf_put(Cmnd, iqd); + qpti->sbits |= (1 << tgt); } else if (!ok) { qpti->sbits |= (1 << tgt); -- cgit v0.10.2 From b4d1b825785847cddee6d104113da913f2ca8efb Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 14 Oct 2005 15:26:08 -0700 Subject: [SPARC64]: Fix powering off on SMP. Doing a "SUNW,stop-self" firmware call on the other cpus is not the correct thing to do when dropping into the firmware for a halt, reboot, or power-off. For now, just do nothing to quiet the other cpus, as the system should be quiescent enough. Later we may decide to implement smp_send_stop() like the other SMP platforms do. Based upon a report from Christopher Zimmermann. Signed-off-by: David S. Miller diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 590df5a..b137fd6 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -1001,13 +1001,6 @@ void smp_penguin_jailcell(int irq, struct pt_regs *regs) preempt_enable(); } -extern unsigned long xcall_promstop; - -void smp_promstop_others(void) -{ - smp_cross_call(&xcall_promstop, 0, 0, 0); -} - #define prof_multiplier(__cpu) cpu_data(__cpu).multiplier #define prof_counter(__cpu) cpu_data(__cpu).counter diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S index 058b812..e4c9151 100644 --- a/arch/sparc64/mm/ultra.S +++ b/arch/sparc64/mm/ultra.S @@ -453,22 +453,6 @@ xcall_flush_dcache_page_spitfire: /* %g1 == physical page address nop nop - .globl xcall_promstop -xcall_promstop: - rdpr %pstate, %g2 - wrpr %g2, PSTATE_IG | PSTATE_AG, %pstate - rdpr %pil, %g2 - wrpr %g0, 15, %pil - sethi %hi(109f), %g7 - b,pt %xcc, etrap_irq -109: or %g7, %lo(109b), %g7 - flushw - call prom_stopself - nop - /* We should not return, just spin if we do... */ -1: b,a,pt %xcc, 1b - nop - .data errata32_hwbug: diff --git a/arch/sparc64/prom/misc.c b/arch/sparc64/prom/misc.c index 9b895fa..87f5cfc 100644 --- a/arch/sparc64/prom/misc.c +++ b/arch/sparc64/prom/misc.c @@ -68,19 +68,11 @@ void prom_cmdline(void) local_irq_restore(flags); } -#ifdef CONFIG_SMP -extern void smp_promstop_others(void); -#endif - /* Drop into the prom, but completely terminate the program. * No chance of continuing. */ void prom_halt(void) { -#ifdef CONFIG_SMP - smp_promstop_others(); - udelay(8000); -#endif again: p1275_cmd("exit", P1275_INOUT(0, 0)); goto again; /* PROM is out to get me -DaveM */ @@ -88,10 +80,6 @@ again: void prom_halt_power_off(void) { -#ifdef CONFIG_SMP - smp_promstop_others(); - udelay(8000); -#endif p1275_cmd("SUNW,power-off", P1275_INOUT(0, 0)); /* if nothing else helps, we just halt */ -- cgit v0.10.2 From 43d2c4ca385b02ab7a604aa09a9da36f1668bee6 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Fri, 14 Oct 2005 15:59:00 -0700 Subject: [PATCH] mips: fix build error in TANBAC TB0226 arch/mips/pci/fixup-tb0226.c: In function `pcibios_map_irq': arch/mips/pci/fixup-tb0226.c:31: warning: implicit declaration of function `vr41xx_set_irq_trigger' arch/mips/pci/fixup-tb0226.c:32: error: `TRIGGER_LEVEL' undeclared (first use in this function) arch/mips/pci/fixup-tb0226.c:32: error: (Each undeclared identifier is reported only once arch/mips/pci/fixup-tb0226.c:32: error: for each function it appears in.) arch/mips/pci/fixup-tb0226.c:33: error: `SIGNAL_THROUGH' undeclared (first use in this function) arch/mips/pci/fixup-tb0226.c:34: warning: implicit declaration of function `vr41xx_set_irq_level' arch/mips/pci/fixup-tb0226.c:34: error: `LEVEL_LOW' undeclared (first use in this function) Signed-off-by: Yoichi Yuasa Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/mips/pci/fixup-tb0226.c b/arch/mips/pci/fixup-tb0226.c index 61513d5..b5d42b1 100644 --- a/arch/mips/pci/fixup-tb0226.c +++ b/arch/mips/pci/fixup-tb0226.c @@ -1,7 +1,7 @@ /* * fixup-tb0226.c, The TANBAC TB0226 specific PCI fixups. * - * Copyright (C) 2002-2004 Yoichi Yuasa + * Copyright (C) 2002-2005 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -20,6 +20,7 @@ #include #include +#include #include int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) @@ -29,42 +30,42 @@ int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) switch (slot) { case 12: vr41xx_set_irq_trigger(GD82559_1_PIN, - TRIGGER_LEVEL, - SIGNAL_THROUGH); - vr41xx_set_irq_level(GD82559_1_PIN, LEVEL_LOW); + IRQ_TRIGGER_LEVEL, + IRQ_SIGNAL_THROUGH); + vr41xx_set_irq_level(GD82559_1_PIN, IRQ_LEVEL_LOW); irq = GD82559_1_IRQ; break; case 13: vr41xx_set_irq_trigger(GD82559_2_PIN, - TRIGGER_LEVEL, - SIGNAL_THROUGH); - vr41xx_set_irq_level(GD82559_2_PIN, LEVEL_LOW); + IRQ_TRIGGER_LEVEL, + IRQ_SIGNAL_THROUGH); + vr41xx_set_irq_level(GD82559_2_PIN, IRQ_LEVEL_LOW); irq = GD82559_2_IRQ; break; case 14: switch (pin) { case 1: vr41xx_set_irq_trigger(UPD720100_INTA_PIN, - TRIGGER_LEVEL, - SIGNAL_THROUGH); + IRQ_TRIGGER_LEVEL, + IRQ_SIGNAL_THROUGH); vr41xx_set_irq_level(UPD720100_INTA_PIN, - LEVEL_LOW); + IRQ_LEVEL_LOW); irq = UPD720100_INTA_IRQ; break; case 2: vr41xx_set_irq_trigger(UPD720100_INTB_PIN, - TRIGGER_LEVEL, - SIGNAL_THROUGH); + IRQ_TRIGGER_LEVEL, + IRQ_SIGNAL_THROUGH); vr41xx_set_irq_level(UPD720100_INTB_PIN, - LEVEL_LOW); + IRQ_LEVEL_LOW); irq = UPD720100_INTB_IRQ; break; case 3: vr41xx_set_irq_trigger(UPD720100_INTC_PIN, - TRIGGER_LEVEL, - SIGNAL_THROUGH); + IRQ_TRIGGER_LEVEL, + IRQ_SIGNAL_THROUGH); vr41xx_set_irq_level(UPD720100_INTC_PIN, - LEVEL_LOW); + IRQ_LEVEL_LOW); irq = UPD720100_INTC_IRQ; break; default: -- cgit v0.10.2 From 6edb7467be2195e7eeb6844e37668253af216100 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Fri, 14 Oct 2005 15:59:01 -0700 Subject: [PATCH] zaurus: fix compilation with cpufreq disabled This fixes compilation with CPU_FREQ disabled. Signed-off-by: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c index beeec7b..8000890 100644 --- a/drivers/video/sa1100fb.c +++ b/drivers/video/sa1100fb.c @@ -592,6 +592,7 @@ sa1100fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, return ret; } +#ifdef CONFIG_CPU_FREQ /* * sa1100fb_display_dma_period() * Calculate the minimum period (in picoseconds) between two DMA @@ -606,6 +607,7 @@ static inline unsigned int sa1100fb_display_dma_period(struct fb_var_screeninfo */ return var->pixclock * 8 * 16 / var->bits_per_pixel; } +#endif /* * sa1100fb_check_var(): -- cgit v0.10.2 From 4846d0172dd7fb6a77843644caa6d9a8909225b9 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Fri, 14 Oct 2005 15:59:02 -0700 Subject: [PATCH] zaurus: fix soc_common.c This fixes wrong comments, non-working debug subsystem, and some potentially dangerous macros. Signed-off-by: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c index 888b70e..9e7ccd8 100644 --- a/drivers/pcmcia/soc_common.c +++ b/drivers/pcmcia/soc_common.c @@ -66,7 +66,7 @@ void soc_pcmcia_debug(struct soc_pcmcia_socket *skt, const char *func, if (pc_debug > lvl) { printk(KERN_DEBUG "skt%u: %s: ", skt->nr, func); va_start(args, fmt); - printk(fmt, args); + vprintk(fmt, args); va_end(args); } } @@ -321,8 +321,6 @@ soc_common_pcmcia_get_socket(struct pcmcia_socket *sock, socket_state_t *state) * less punt all of this work and let the kernel handle the details * of power configuration, reset, &c. We also record the value of * `state' in order to regurgitate it to the PCMCIA core later. - * - * Returns: 0 */ static int soc_common_pcmcia_set_socket(struct pcmcia_socket *sock, socket_state_t *state) @@ -407,7 +405,7 @@ soc_common_pcmcia_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *m * the map speed as requested, but override the address ranges * supplied by Card Services. * - * Returns: 0 on success, -1 on error + * Returns: 0 on success, -ERRNO on error */ static int soc_common_pcmcia_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map) @@ -655,8 +653,8 @@ static void soc_pcmcia_cpufreq_unregister(void) } #else -#define soc_pcmcia_cpufreq_register() -#define soc_pcmcia_cpufreq_unregister() +static int soc_pcmcia_cpufreq_register(void) { return 0; } +static void soc_pcmcia_cpufreq_unregister(void) {} #endif int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, int first, int nr) @@ -738,7 +736,7 @@ int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops goto out_err_5; } - if ( list_empty(&soc_pcmcia_sockets) ) + if (list_empty(&soc_pcmcia_sockets)) soc_pcmcia_cpufreq_register(); list_add(&skt->node, &soc_pcmcia_sockets); @@ -839,7 +837,7 @@ int soc_common_drv_pcmcia_remove(struct device *dev) release_resource(&skt->res_io); release_resource(&skt->res_skt); } - if ( list_empty(&soc_pcmcia_sockets) ) + if (list_empty(&soc_pcmcia_sockets)) soc_pcmcia_cpufreq_unregister(); up(&soc_pcmcia_sockets_lock); -- cgit v0.10.2 From 65d406ace3b44e042807d3f9a2e71088818e80f2 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Fri, 14 Oct 2005 15:59:03 -0700 Subject: [PATCH] zaurus: fix dependencies on collie keyboard This fixes depenencies of collie keyboard. Signed-off-by: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 444f775..571a686 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -93,7 +93,7 @@ config KEYBOARD_LKKBD config KEYBOARD_LOCOMO tristate "LoCoMo Keyboard Support" - depends on SHARP_LOCOMO + depends on SHARP_LOCOMO && INPUT_KEYBOARD help Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA -- cgit v0.10.2 From c6ecf7ed3131961e5aeedb0efd217afa0808798f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 14 Oct 2005 15:59:03 -0700 Subject: [PATCH] Add missing export of getnstimeofday() Adds the missing EXPORT_SYMBOL_GPL for getnstimeofday() when CONFIG_TIME_INTERPOLATION isn't set. Needed by drivers/char/mmtimer.c Signed-off-by: Takashi Iwai Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/time.c b/kernel/time.c index dd5ae11..40c2410 100644 --- a/kernel/time.c +++ b/kernel/time.c @@ -570,6 +570,7 @@ void getnstimeofday(struct timespec *tv) tv->tv_sec = x.tv_sec; tv->tv_nsec = x.tv_usec * NSEC_PER_USEC; } +EXPORT_SYMBOL_GPL(getnstimeofday); #endif #if (BITS_PER_LONG < 64) -- cgit v0.10.2 From f1ac046d7b297186f755fb213589b539426e1406 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Fri, 14 Oct 2005 15:59:04 -0700 Subject: [PATCH] radio-cadet: check request_region() return value correctly Signed-off-by: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/media/radio/radio-cadet.c b/drivers/media/radio/radio-cadet.c index 022913d..9b04063 100644 --- a/drivers/media/radio/radio-cadet.c +++ b/drivers/media/radio/radio-cadet.c @@ -543,7 +543,7 @@ static int cadet_probe(void) for(i=0;i<8;i++) { io=iovals[i]; - if(request_region(io,2, "cadet-probe")>=0) { + if (request_region(io, 2, "cadet-probe")) { cadet_setfreq(1410); if(cadet_getfreq()==1410) { release_region(io, 2); -- cgit v0.10.2 From e26148d934762b61133a64b6862f870624ff617d Mon Sep 17 00:00:00 2001 From: Tim Schmielau Date: Fri, 14 Oct 2005 15:59:05 -0700 Subject: [PATCH] Fix copy-and-paste error in BSD accounting Fix copy and paste error in jiffies_to_AHZ conversion which leads to wrong BSD accounting information on alpha and ia64 when CONFIG_BSD_PROCESS_ACCT_V3 is turned on. Also update comment to match reorganised header files. Signed-off-by: Tim Schmielau Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/acct.h b/include/linux/acct.h index 1993a36..19f7046 100644 --- a/include/linux/acct.h +++ b/include/linux/acct.h @@ -162,13 +162,13 @@ typedef struct acct acct_t; #ifdef __KERNEL__ /* * Yet another set of HZ to *HZ helper functions. - * See for the original. + * See for the original. */ static inline u32 jiffies_to_AHZ(unsigned long x) { #if (TICK_NSEC % (NSEC_PER_SEC / AHZ)) == 0 - return x / (HZ / USER_HZ); + return x / (HZ / AHZ); #else u64 tmp = (u64)x * TICK_NSEC; do_div(tmp, (NSEC_PER_SEC / AHZ)); -- cgit v0.10.2 From 6593b58cfb54138781c5cd88f605e2ae663301b0 Mon Sep 17 00:00:00 2001 From: Matteo Croce <3297627799@wind.it> Date: Fri, 14 Oct 2005 15:59:06 -0700 Subject: [PATCH] wireless/airo: Build fix The aironet PCI driver has a build dependency on ISA that prevent the driver to compile on systems that doesn't support ISA, like x86_64. The driver really doesn't depend on ISA, it does some ISA stuff in the initialization code, since the driver supports both ISA and PCI cards. So the driver should depend on ISA_DMA_API to build on all systems, and this will not hurt PCI at all. Signed-off-by: Matteo Croce <3297627799@wind.it> Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 00a07f3..7187958 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -243,7 +243,7 @@ config IPW_DEBUG config AIRO tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards" - depends on NET_RADIO && ISA && (PCI || BROKEN) + depends on NET_RADIO && ISA_DMA_API && (PCI || BROKEN) ---help--- This is the standard Linux driver to support Cisco/Aironet ISA and PCI 802.11 wireless cards. -- cgit v0.10.2 From a90933fb4e7b85587e5cbdf863deeb16695c19bd Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Fri, 14 Oct 2005 15:59:07 -0700 Subject: [PATCH] m32r: Fix smp.c for preempt kernel This patch fixes the following BUG message of arch/m32r/smp.c for CONFIG_DEBUG_PREEMPT: BUG: using smp_processor_id() in preemptible This message is displayed by an smp_processor_id() execution during kernel's preemptible-state. Signed-off-by: Hitoshi Yamamoto Signed-off-by: Hirokazu Takata Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c index a4576ac..8b1f6eb 100644 --- a/arch/m32r/kernel/smp.c +++ b/arch/m32r/kernel/smp.c @@ -275,12 +275,14 @@ static void flush_tlb_all_ipi(void *info) *==========================================================================*/ void smp_flush_tlb_mm(struct mm_struct *mm) { - int cpu_id = smp_processor_id(); + int cpu_id; cpumask_t cpu_mask; - unsigned long *mmc = &mm->context[cpu_id]; + unsigned long *mmc; unsigned long flags; preempt_disable(); + cpu_id = smp_processor_id(); + mmc = &mm->context[cpu_id]; cpu_mask = mm->cpu_vm_mask; cpu_clear(cpu_id, cpu_mask); @@ -343,12 +345,14 @@ void smp_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, void smp_flush_tlb_page(struct vm_area_struct *vma, unsigned long va) { struct mm_struct *mm = vma->vm_mm; - int cpu_id = smp_processor_id(); + int cpu_id; cpumask_t cpu_mask; - unsigned long *mmc = &mm->context[cpu_id]; + unsigned long *mmc; unsigned long flags; preempt_disable(); + cpu_id = smp_processor_id(); + mmc = &mm->context[cpu_id]; cpu_mask = mm->cpu_vm_mask; cpu_clear(cpu_id, cpu_mask); -- cgit v0.10.2 From 1350843cf0fa46e2f633c78b335777aac3d054b2 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 14 Oct 2005 15:59:09 -0700 Subject: [PATCH] ppc64: Fix G5 model in /proc/cpuinfo Andreas Schwab spotted that recent kernels broke reporting of the PowerMac machine model in /proc/cpuinfo. This fixes it. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/ppc64/kernel/pmac_setup.c b/arch/ppc64/kernel/pmac_setup.c index 2575525..fa8121d 100644 --- a/arch/ppc64/kernel/pmac_setup.c +++ b/arch/ppc64/kernel/pmac_setup.c @@ -115,7 +115,7 @@ static void __pmac pmac_show_cpuinfo(struct seq_file *m) /* find motherboard type */ seq_printf(m, "machine\t\t: "); - np = find_devices("device-tree"); + np = of_find_node_by_path("/"); if (np != NULL) { pp = (char *) get_property(np, "model", NULL); if (pp != NULL) @@ -133,6 +133,7 @@ static void __pmac pmac_show_cpuinfo(struct seq_file *m) } seq_printf(m, "\n"); } + of_node_put(np); } else seq_printf(m, "PowerMac\n"); -- cgit v0.10.2 From 0e7734d3ca24302a513e69dd24a560c34047c038 Mon Sep 17 00:00:00 2001 From: Mark Haverkamp Date: Fri, 14 Oct 2005 15:59:10 -0700 Subject: [PATCH] aacraid: host_lock not released fix While doing some testing of error cases I ran into this bug. In some cases the reset handler can exit with the host_lock still held. Signed-off-by: Mark Haverkamp Cc: James Bottomley Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index de8490a..a1f9cee 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -453,9 +453,9 @@ static int aac_eh_reset(struct scsi_cmnd* cmd) /* * We can exit If all the commands are complete */ + spin_unlock_irq(host->host_lock); if (active == 0) return SUCCESS; - spin_unlock_irq(host->host_lock); ssleep(1); spin_lock_irq(host->host_lock); } -- cgit v0.10.2 From 2d1f87a728a5ddd9ee0418e14a12e5cb0372fad1 Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Fri, 14 Oct 2005 15:59:11 -0700 Subject: [PATCH] Dallas's 1-wire bus compile error drivers/built-in.o: In function `w1_alloc_dev': undefined reference to `netlink_kernel_create' drivers/built-in.o: In function `w1_alloc_dev': undefined reference to `sock_release' Signed-off-by: Evgeniy Polyakov Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c index 1b6b74c..14016b1 100644 --- a/drivers/w1/w1.c +++ b/drivers/w1/w1.c @@ -77,8 +77,7 @@ static void w1_master_release(struct device *dev) dev_dbg(dev, "%s: Releasing %s.\n", __func__, md->name); - if (md->nls && md->nls->sk_socket) - sock_release(md->nls->sk_socket); + dev_fini_netlink(md); memset(md, 0, sizeof(struct w1_master) + sizeof(struct w1_bus_master)); kfree(md); } -- cgit v0.10.2 From 63c6764ce4c650245a41a95a2235207d25ca4fde Mon Sep 17 00:00:00 2001 From: Yoshinori Sato Date: Fri, 14 Oct 2005 15:59:11 -0700 Subject: [PATCH] nommu build error fix "proc_smaps_operations" is not defined in case of "CONFIG_MMU=n". Signed-off-by: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/proc/base.c b/fs/proc/base.c index 3b33f94..a170450 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -103,7 +103,9 @@ enum pid_directory_inos { PROC_TGID_NUMA_MAPS, PROC_TGID_MOUNTS, PROC_TGID_WCHAN, +#ifdef CONFIG_MMU PROC_TGID_SMAPS, +#endif #ifdef CONFIG_SCHEDSTATS PROC_TGID_SCHEDSTAT, #endif @@ -141,7 +143,9 @@ enum pid_directory_inos { PROC_TID_NUMA_MAPS, PROC_TID_MOUNTS, PROC_TID_WCHAN, +#ifdef CONFIG_MMU PROC_TID_SMAPS, +#endif #ifdef CONFIG_SCHEDSTATS PROC_TID_SCHEDSTAT, #endif @@ -195,7 +199,9 @@ static struct pid_entry tgid_base_stuff[] = { E(PROC_TGID_ROOT, "root", S_IFLNK|S_IRWXUGO), E(PROC_TGID_EXE, "exe", S_IFLNK|S_IRWXUGO), E(PROC_TGID_MOUNTS, "mounts", S_IFREG|S_IRUGO), +#ifdef CONFIG_MMU E(PROC_TGID_SMAPS, "smaps", S_IFREG|S_IRUGO), +#endif #ifdef CONFIG_SECURITY E(PROC_TGID_ATTR, "attr", S_IFDIR|S_IRUGO|S_IXUGO), #endif @@ -235,7 +241,9 @@ static struct pid_entry tid_base_stuff[] = { E(PROC_TID_ROOT, "root", S_IFLNK|S_IRWXUGO), E(PROC_TID_EXE, "exe", S_IFLNK|S_IRWXUGO), E(PROC_TID_MOUNTS, "mounts", S_IFREG|S_IRUGO), +#ifdef CONFIG_MMU E(PROC_TID_SMAPS, "smaps", S_IFREG|S_IRUGO), +#endif #ifdef CONFIG_SECURITY E(PROC_TID_ATTR, "attr", S_IFDIR|S_IRUGO|S_IXUGO), #endif @@ -630,6 +638,7 @@ static struct file_operations proc_numa_maps_operations = { }; #endif +#ifdef CONFIG_MMU extern struct seq_operations proc_pid_smaps_op; static int smaps_open(struct inode *inode, struct file *file) { @@ -648,6 +657,7 @@ static struct file_operations proc_smaps_operations = { .llseek = seq_lseek, .release = seq_release, }; +#endif extern struct seq_operations mounts_op; static int mounts_open(struct inode *inode, struct file *file) @@ -1681,10 +1691,12 @@ static struct dentry *proc_pident_lookup(struct inode *dir, case PROC_TGID_MOUNTS: inode->i_fop = &proc_mounts_operations; break; +#ifdef CONFIG_MMU case PROC_TID_SMAPS: case PROC_TGID_SMAPS: inode->i_fop = &proc_smaps_operations; break; +#endif #ifdef CONFIG_SECURITY case PROC_TID_ATTR: inode->i_nlink = 2; -- cgit v0.10.2 From d656901bca2e19057ca7a6e48bc56dec9ca7003e Mon Sep 17 00:00:00 2001 From: Yoshinori Sato Date: Fri, 14 Oct 2005 15:59:12 -0700 Subject: [PATCH] sh-sci.c sci_start_tx error Argument does not agree. Signed-off-by: Yoshinori Sato Cc: Paul Mundt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 5122663..430754e 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -967,7 +967,7 @@ static int sci_startup(struct uart_port *port) #endif sci_request_irq(s); - sci_start_tx(port, 1); + sci_start_tx(port); sci_start_rx(port, 1); return 0; -- cgit v0.10.2 From 757e0108473787f470294ce77bf703fedddfce7d Mon Sep 17 00:00:00 2001 From: "Kolli, Neela Syam" Date: Fri, 14 Oct 2005 15:59:13 -0700 Subject: [PATCH] megaraid maintainers entry I am taking over all Megaraid SCSI drivers. Here is the patch for the MAINTENERS file. Signed-off-by: Neela Syam Kolli Cc: James Bottomley Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index abf7f7a..767fb61 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1618,6 +1618,13 @@ M: vandrove@vc.cvut.cz L: linux-fbdev-devel@lists.sourceforge.net S: Maintained +MEGARAID SCSI DRIVERS +P: Neela Syam Kolli +M: Neela.Kolli@engenio.com +S: linux-scsi@vger.kernel.org +W: http://megaraid.lsilogic.com +S: Maintained + MEMORY TECHNOLOGY DEVICES P: David Woodhouse M: dwmw2@infradead.org -- cgit v0.10.2 From 7a3ca7d2b5ec31b2cfa594b961d77e68075e33c7 Mon Sep 17 00:00:00 2001 From: Randall Nortman Date: Fri, 14 Oct 2005 17:21:50 -0700 Subject: [PATCH] usbserial: Regression in USB generic serial driver Kernel version 2.6.13 introduced a regression in the generic USB serial converter driver (usbserial.o, drivers/usb/serial/generic.c). The bug manifests, as far as I can tell, whenever you attempt to write to the device -- the write will never complete (write() returns 0, or blocks). Signed-off-by: Randall Nortman Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index ddde5fb..5f7d319 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -223,7 +223,7 @@ int usb_serial_generic_write_room (struct usb_serial_port *port) dbg("%s - port %d", __FUNCTION__, port->number); if (serial->num_bulk_out) { - if (port->write_urb_busy) + if (!(port->write_urb_busy)) room = port->bulk_out_size; } -- cgit v0.10.2 From e6850cce8f0fcb0e16b981f13cb9c69618bbdaf1 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sat, 15 Oct 2005 16:15:38 -0700 Subject: [NETFILTER]: Fix ip6_table.c build with NETFILTER_DEBUG enabled. Signed-off-by: Andrew Morton Signed-off-by: David S. Miller diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c index b03e906..21deec2 100644 --- a/net/ipv6/netfilter/ip6_tables.c +++ b/net/ipv6/netfilter/ip6_tables.c @@ -975,7 +975,6 @@ replace_table(struct ip6t_table *table, struct ip6t_entry *table_base; unsigned int i; - for (i = 0; i < num_possible_cpus(); i++) { for_each_cpu(i) { table_base = (void *)newinfo->entries -- cgit v0.10.2 From 688ce17b8599abc548b406c00e4d18ae0dec954f Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 16 Oct 2005 00:17:33 -0700 Subject: [PATCH]: highest_possible_processor_id() has to be a macro ... otherwise, things like alpha and sparc64 break and break badly. They define cpu_possible_map to something else in smp.h *AFTER* having included cpumask.h. If that puppy is a macro, expansion will happen at the actual caller, when we'd already seen #define cpu_possible_map ... and we will get the right thing used. As an inline helper it will be tokenized before we get to that define and that's it; no matter what we define later, it won't affect anything. We get modules with dependency on cpu_possible_map instead of the right symbol (phys_cpu_present_map in case of sparc64), or outright link errors if they are built-in. Signed-off-by: Al Viro Signed-off-by: David S. Miller diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index fe97783..9bdba81 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -393,15 +393,13 @@ extern cpumask_t cpu_present_map; #define for_each_present_cpu(cpu) for_each_cpu_mask((cpu), cpu_present_map) /* Find the highest possible smp_processor_id() */ -static inline unsigned int highest_possible_processor_id(void) -{ - unsigned int cpu, highest = 0; - - for_each_cpu_mask(cpu, cpu_possible_map) - highest = cpu; - - return highest; -} +#define highest_possible_processor_id() \ +({ \ + unsigned int cpu, highest = 0; \ + for_each_cpu_mask(cpu, cpu_possible_map) \ + highest = cpu; \ + highest; \ +}) #endif /* __LINUX_CPUMASK_H */ -- cgit v0.10.2 From 3d80636a0d5f056ffc26472d05b6027a7a9f6e1c Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 16 Oct 2005 17:36:06 -0700 Subject: Fix memory ordering bug in page reclaim As noticed by Nick Piggin, we need to make sure that we check the page count before we check for PageDirty, since the dirty check is only valid if the count implies that we're the only possible ones holding the page. We always did do this, but the code needs a read-memory-barrier to make sure that the orderign is also honored by the CPU. (The writer side is ordered due to the atomic decrement and test on the page count, see the discussion on linux-kernel) Signed-off-by: Linus Torvalds diff --git a/mm/vmscan.c b/mm/vmscan.c index 0ea71e8..64f9570 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -511,10 +511,11 @@ static int shrink_list(struct list_head *page_list, struct scan_control *sc) * PageDirty _after_ making sure that the page is freeable and * not in use by anybody. (pagecache + us == 2) */ - if (page_count(page) != 2 || PageDirty(page)) { - write_unlock_irq(&mapping->tree_lock); - goto keep_locked; - } + if (unlikely(page_count(page) != 2)) + goto cannot_free; + smp_rmb(); + if (unlikely(PageDirty(page))) + goto cannot_free; #ifdef CONFIG_SWAP if (PageSwapCache(page)) { @@ -538,6 +539,10 @@ free_it: __pagevec_release_nonlru(&freed_pvec); continue; +cannot_free: + write_unlock_irq(&mapping->tree_lock); + goto keep_locked; + activate_locked: SetPageActive(page); pgactivate++; -- cgit v0.10.2 From b24d18aa743dad0c42918157c5d717686269d3a8 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 16 Oct 2005 20:29:20 -0700 Subject: [PATCH] list: add missing rcu_dereference on first element It seems that all the list_*_rcu primitives are missing a memory barrier on the very first dereference. For example, #define list_for_each_rcu(pos, head) \ for (pos = (head)->next; prefetch(pos->next), pos != (head); \ pos = rcu_dereference(pos->next)) It will go something like: pos = (head)->next prefetch(pos->next) pos != (head) do stuff We're missing a barrier here. pos = rcu_dereference(pos->next) fetch pos->next barrier given by rcu_dereference(pos->next) store pos Without the missing barrier, the pos->next value may turn out to be stale. In fact, if "do stuff" were also dereferencing pos and relying on list_for_each_rcu to provide the barrier then it may also break. So here is a patch to make sure that we have a barrier for the first element in the list. Signed-off-by: Herbert Xu Acked-by: "Paul E. McKenney" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/list.h b/include/linux/list.h index e6ec596..084971f 100644 --- a/include/linux/list.h +++ b/include/linux/list.h @@ -442,12 +442,14 @@ static inline void list_splice_init(struct list_head *list, * as long as the traversal is guarded by rcu_read_lock(). */ #define list_for_each_rcu(pos, head) \ - for (pos = (head)->next; prefetch(pos->next), pos != (head); \ - pos = rcu_dereference(pos->next)) + for (pos = (head)->next; \ + prefetch(rcu_dereference(pos)->next), pos != (head); \ + pos = pos->next) #define __list_for_each_rcu(pos, head) \ - for (pos = (head)->next; pos != (head); \ - pos = rcu_dereference(pos->next)) + for (pos = (head)->next; \ + rcu_dereference(pos) != (head); \ + pos = pos->next) /** * list_for_each_safe_rcu - iterate over an rcu-protected list safe @@ -461,8 +463,9 @@ static inline void list_splice_init(struct list_head *list, * as long as the traversal is guarded by rcu_read_lock(). */ #define list_for_each_safe_rcu(pos, n, head) \ - for (pos = (head)->next, n = pos->next; pos != (head); \ - pos = rcu_dereference(n), n = pos->next) + for (pos = (head)->next; \ + n = rcu_dereference(pos)->next, pos != (head); \ + pos = n) /** * list_for_each_entry_rcu - iterate over rcu list of given type @@ -474,11 +477,11 @@ static inline void list_splice_init(struct list_head *list, * the _rcu list-mutation primitives such as list_add_rcu() * as long as the traversal is guarded by rcu_read_lock(). */ -#define list_for_each_entry_rcu(pos, head, member) \ - for (pos = list_entry((head)->next, typeof(*pos), member); \ - prefetch(pos->member.next), &pos->member != (head); \ - pos = rcu_dereference(list_entry(pos->member.next, \ - typeof(*pos), member))) +#define list_for_each_entry_rcu(pos, head, member) \ + for (pos = list_entry((head)->next, typeof(*pos), member); \ + prefetch(rcu_dereference(pos)->member.next), \ + &pos->member != (head); \ + pos = list_entry(pos->member.next, typeof(*pos), member)) /** @@ -492,8 +495,9 @@ static inline void list_splice_init(struct list_head *list, * as long as the traversal is guarded by rcu_read_lock(). */ #define list_for_each_continue_rcu(pos, head) \ - for ((pos) = (pos)->next; prefetch((pos)->next), (pos) != (head); \ - (pos) = rcu_dereference((pos)->next)) + for ((pos) = (pos)->next; \ + prefetch(rcu_dereference((pos))->next), (pos) != (head); \ + (pos) = (pos)->next) /* * Double linked lists with a single pointer list head. @@ -696,8 +700,9 @@ static inline void hlist_add_after_rcu(struct hlist_node *prev, pos = n) #define hlist_for_each_rcu(pos, head) \ - for ((pos) = (head)->first; pos && ({ prefetch((pos)->next); 1; }); \ - (pos) = rcu_dereference((pos)->next)) + for ((pos) = (head)->first; \ + rcu_dereference((pos)) && ({ prefetch((pos)->next); 1; }); \ + (pos) = (pos)->next) /** * hlist_for_each_entry - iterate over list of given type @@ -762,9 +767,9 @@ static inline void hlist_add_after_rcu(struct hlist_node *prev, */ #define hlist_for_each_entry_rcu(tpos, pos, head, member) \ for (pos = (head)->first; \ - pos && ({ prefetch(pos->next); 1;}) && \ + rcu_dereference(pos) && ({ prefetch(pos->next); 1;}) && \ ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \ - pos = rcu_dereference(pos->next)) + pos = pos->next) #else #warning "don't include kernel headers in userspace" -- cgit v0.10.2 From 0aec4867dca149e2049e8439b76bd82ad9dac52c Mon Sep 17 00:00:00 2001 From: Samuel Thibault Date: Sun, 16 Oct 2005 20:29:22 -0700 Subject: [PATCH] SVGATextMode fix Fix bug 5441. I didn't know about messy programs like svgatextmode... Couldn't this be integrated in some linux/drivers/video/console/svgacon.c ?... So because of the existence of the svgatextmode program, the kernel is not supposed to touch to CRT_OVERFLOW/SYNC_END/DISP/DISP_END/OFFSET ? Disabling the check in vgacon_resize() might help indeed, but I'm really not sure whether it will work for any chipset: in my patch, CRT registers are set at each console switch, since stty rows/cols apply to consoles separately... The attached solution is to keep the test, but if it fails, we assume that the caller knows what it does (i.e. it is svgatextmode) and then disable any further call to vgacon_doresize. Svgatextmode is usually used to _expand_ the display, not to shrink it. And it is harmless in the case of a too big stty rows/cols: the display will just be cropped. I tested it on my laptop, and it works fine with svgatextmode. A better solution would be that svgatextmode explicitely tells the kernel not to care about video timing, but for this an interface needs be defined and svgatextmode be patched. Signed-off-by: Samuel Thibault Cc: "Antonino A. Daplas" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index 6ef6f77..809fee2 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -565,7 +565,11 @@ static int vgacon_switch(struct vc_data *c) scr_memcpyw((u16 *) c->vc_origin, (u16 *) c->vc_screenbuf, c->vc_screenbuf_size > vga_vram_size ? vga_vram_size : c->vc_screenbuf_size); - vgacon_doresize(c, c->vc_cols, c->vc_rows); + if (!(vga_video_num_columns % 2) && + vga_video_num_columns <= ORIG_VIDEO_COLS && + vga_video_num_lines <= (ORIG_VIDEO_LINES * + vga_default_font_height) / c->vc_font.height) + vgacon_doresize(c, c->vc_cols, c->vc_rows); } return 0; /* Redrawing not needed */ @@ -1023,7 +1027,8 @@ static int vgacon_resize(struct vc_data *c, unsigned int width, if (width % 2 || width > ORIG_VIDEO_COLS || height > (ORIG_VIDEO_LINES * vga_default_font_height)/ c->vc_font.height) - return -EINVAL; + /* let svgatextmode tinker with video timings */ + return 0; if (CON_IS_VISIBLE(c) && !vga_is_gfx) /* who knows */ vgacon_doresize(c, width, height); -- cgit v0.10.2 From 9b3acc21d7677787ef456d17574a084a1c1193ae Mon Sep 17 00:00:00 2001 From: "Ronald S. Bultje" Date: Sun, 16 Oct 2005 20:29:24 -0700 Subject: [PATCH] fix vpx3220 offset issue in SECAM Fix bug #5404 in kernel bugzilla. It basically updates the vpx3220 initialization tables with some newer values that we've had in CVS for a while (and that, for some reason, never ended up in the kernel... must've gotten lost). Those fix a ~16 pixels noise at the top of the picture in at least SECAM, although (now that I think about it) PAL was probably affected, also. Signed-off-by: Ronald S. Bultje Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/media/video/vpx3220.c b/drivers/media/video/vpx3220.c index 4437bde..2bafca4 100644 --- a/drivers/media/video/vpx3220.c +++ b/drivers/media/video/vpx3220.c @@ -203,7 +203,7 @@ static const unsigned short init_ntsc[] = { 0x8c, 640, /* Horizontal length */ 0x8d, 640, /* Number of pixels */ 0x8f, 0xc00, /* Disable window 2 */ - 0xf0, 0x173, /* 13.5 MHz transport, Forced + 0xf0, 0x73, /* 13.5 MHz transport, Forced * mode, latch windows */ 0xf2, 0x13, /* NTSC M, composite input */ 0xe7, 0x1e1, /* Enable vertical standard @@ -212,38 +212,36 @@ static const unsigned short init_ntsc[] = { static const unsigned short init_pal[] = { 0x88, 23, /* Window 1 vertical begin */ - 0x89, 288 + 16, /* Vertical lines in (16 lines + 0x89, 288, /* Vertical lines in (16 lines * skipped by the VFE) */ - 0x8a, 288 + 16, /* Vertical lines out (16 lines + 0x8a, 288, /* Vertical lines out (16 lines * skipped by the VFE) */ 0x8b, 16, /* Horizontal begin */ 0x8c, 768, /* Horizontal length */ 0x8d, 784, /* Number of pixels * Must be >= Horizontal begin + Horizontal length */ 0x8f, 0xc00, /* Disable window 2 */ - 0xf0, 0x177, /* 13.5 MHz transport, Forced + 0xf0, 0x77, /* 13.5 MHz transport, Forced * mode, latch windows */ 0xf2, 0x3d1, /* PAL B,G,H,I, composite input */ - 0xe7, 0x261, /* PAL/SECAM set to 288 + 16 lines - * change to 0x241 for 288 lines */ + 0xe7, 0x241, /* PAL/SECAM set to 288 lines */ }; static const unsigned short init_secam[] = { - 0x88, 23 - 16, /* Window 1 vertical begin */ - 0x89, 288 + 16, /* Vertical lines in (16 lines + 0x88, 23, /* Window 1 vertical begin */ + 0x89, 288, /* Vertical lines in (16 lines * skipped by the VFE) */ - 0x8a, 288 + 16, /* Vertical lines out (16 lines + 0x8a, 288, /* Vertical lines out (16 lines * skipped by the VFE) */ 0x8b, 16, /* Horizontal begin */ 0x8c, 768, /* Horizontal length */ 0x8d, 784, /* Number of pixels * Must be >= Horizontal begin + Horizontal length */ 0x8f, 0xc00, /* Disable window 2 */ - 0xf0, 0x177, /* 13.5 MHz transport, Forced + 0xf0, 0x77, /* 13.5 MHz transport, Forced * mode, latch windows */ 0xf2, 0x3d5, /* SECAM, composite input */ - 0xe7, 0x261, /* PAL/SECAM set to 288 + 16 lines - * change to 0x241 for 288 lines */ + 0xe7, 0x241, /* PAL/SECAM set to 288 lines */ }; static const unsigned char init_common[] = { -- cgit v0.10.2 From de21eb63add932c61e018d20a760dcaed8c3e40c Mon Sep 17 00:00:00 2001 From: "Ronald S. Bultje" Date: Sun, 16 Oct 2005 20:29:25 -0700 Subject: [PATCH] fix black/white-only svideo input in vpx3220 decoder Fix the fact that the svideo input will only give input in black/white in some circumstances. Reason is that in the PCI controller driver (zr36067), after setting input, we reset norm, which overwrites the input register with the default. This patch makes it always set the correct value for the input when changing norm. Signed-off-by: Ronald S. Bultje Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/media/video/vpx3220.c b/drivers/media/video/vpx3220.c index 2bafca4..137b58f 100644 --- a/drivers/media/video/vpx3220.c +++ b/drivers/media/video/vpx3220.c @@ -408,6 +408,12 @@ vpx3220_command (struct i2c_client *client, case DECODER_SET_NORM: { int *iarg = arg, data; + int temp_input; + + /* Here we back up the input selection because it gets + overwritten when we fill the registers with the + choosen video norm */ + temp_input = vpx3220_fp_read(client, 0xf2); dprintk(1, KERN_DEBUG "%s: DECODER_SET_NORM %d\n", I2C_NAME(client), *iarg); @@ -447,6 +453,10 @@ vpx3220_command (struct i2c_client *client, } decoder->norm = *iarg; + + /* And here we set the backed up video input again */ + vpx3220_fp_write(client, 0xf2, temp_input | 0x0010); + udelay(10); } break; -- cgit v0.10.2 From 2cc78eb52bc1ae89f0a4fa5a00eb998dffde4a9f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 17 Oct 2005 09:10:15 -0700 Subject: Increase default RCU batching sharply Dipankar made RCU limit the batch size to improve latency, but that approach is unworkable: it can cause the RCU queues to grow without bounds, since the batch limiter ended up limiting the callbacks. So make the limit much higher, and start planning on instead limiting the batch size by doing RCU callbacks more often if the queue looks like it might be growing too long. Signed-off-by: Linus Torvalds diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c index bef3b69..dd99415 100644 --- a/kernel/rcupdate.c +++ b/kernel/rcupdate.c @@ -71,7 +71,7 @@ DEFINE_PER_CPU(struct rcu_data, rcu_bh_data) = { 0L }; /* Fake initialization required by compiler */ static DEFINE_PER_CPU(struct tasklet_struct, rcu_tasklet) = {NULL}; -static int maxbatch = 10; +static int maxbatch = 10000; #ifndef __HAVE_ARCH_CMPXCHG /* -- cgit v0.10.2 From e9b765decfb49ddc105d303d491e1bee9769436f Mon Sep 17 00:00:00 2001 From: Olav Kongas Date: Mon, 17 Oct 2005 14:30:43 -0700 Subject: [PATCH] isp116x-hcd: fix handling of short transfers Increased use of scatter-gather by usb-storage driver after 2.6.13 has exposed a buggy codepath in isp116x-hcd, which was probably never visited before: bug happened only for those urbs, for which URB_SHORT_NOT_OK was set AND short transfer occurred. The fix attached was tested in 2 ways: (a) it fixed failing initialization of a flash drive with an embedded hub; (b) the fix was tested with 'usbtest' against a modified g_zero driver (on top of net2280), which generated short bulk IN transfers of various lengths including multiples and non-multiples of max_packet_length. Signed-off-by: Olav Kongas Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 41bbae8..e142056 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -326,7 +326,8 @@ static void postproc_atl_queue(struct isp116x *isp116x) usb_settoggle(udev, ep->epnum, ep->nextpid == USB_PID_OUT, - PTD_GET_TOGGLE(ptd) ^ 1); + PTD_GET_TOGGLE(ptd)); + urb->actual_length += PTD_GET_COUNT(ptd); urb->status = cc_to_error[TD_DATAUNDERRUN]; spin_unlock(&urb->lock); continue; -- cgit v0.10.2 From 13b58ee51802a45d2b8853ffe0003d9fa768195c Mon Sep 17 00:00:00 2001 From: Christian Krause Date: Mon, 17 Oct 2005 14:30:48 -0700 Subject: [PATCH] USB: fix bug in handling of highspeed usb HID devices During the development of an USB device I found a bug in the handling of Highspeed HID devices in the kernel. What happened? Highspeed HID devices are correctly recognized and enumerated by the kernel. But even if usbhid kernel module is loaded, no HID reports are received by the kernel. The output of the hardware USB analyzer told me that the host doesn't even poll for interrupt IN transfers (even the "interrupt in" USB transfer are polled by the host). After some debugging in hid-core.c I've found the reason. In case of a highspeed device, the endpoint interval is re-calculated in driver/usb/input/hid-core.c: line 1669: /* handle potential highspeed HID correctly */ interval = endpoint->bInterval; if (dev->speed == USB_SPEED_HIGH) interval = 1 << (interval - 1); Basically this calculation is correct (refer to USB 2.0 spec, 9.6.6). This new calculated value of "interval" is used as input for usb_fill_int_urb: line 1685: usb_fill_int_urb(hid->urbin, dev, pipe, hid->inbuf, 0, hid_irq_in, hid, interval); Unfortunately the same calculation as above is done a second time in usb_fill_int_urb in the file include/linux/usb.h: line 933: if (dev->speed == USB_SPEED_HIGH) urb->interval = 1 << (interval - 1); else urb->interval = interval; This means, that if the endpoint descriptor (of a high speed device) specifies e.g. bInterval = 7, the urb->interval gets the value: hid-core.c: interval = 1 << (7-1) = 0x40 = 64 urb->interval = 1 << (interval -1) = 1 << (63) = integer overflow Because of this the value of urb->interval is sometimes negative and is rejected in core/urb.c: line 353: /* too small? */ if (urb->interval <= 0) return -EINVAL; The conclusion is, that the recalculaton of the interval (which is necessary for highspeed) should not be made twice, because this is simply wrong. ;-) Re-calculation in usb_fill_int_urb makes more sense, because it is the most general approach. So it would make sense to remove it from hid-core.c. Because in hid-core.c the interval variable is only used for calling usb_fill_int_urb, it is no problem to remove the highspeed re-calculation in this file. Signed-off-by: Christian Krause Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index a99865c..41f92b9 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1702,10 +1702,7 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf) if ((endpoint->bmAttributes & 3) != 3) /* Not an interrupt endpoint */ continue; - /* handle potential highspeed HID correctly */ interval = endpoint->bInterval; - if (dev->speed == USB_SPEED_HIGH) - interval = 1 << (interval - 1); /* Change the polling interval of mice. */ if (hid->collection->usage == HID_GD_MOUSE && hid_mousepoll_interval > 0) -- cgit v0.10.2 From b3c52da33ce95747b1bff86cce716d4f1397f14a Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 17 Oct 2005 06:02:00 -0400 Subject: [PATCH] NFS: Fix cache consistency races If the data cache has been marked as potentially invalid by nfs_refresh_inode, we should invalidate it rather than assume that changes are due to our own activity. Also ensure that we always start with a valid cache before declaring it to be protected by a delegation. Signed-off-by: Trond Myklebust Signed-off-by: Linus Torvalds diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c index d7f7eb6..4a36839 100644 --- a/fs/nfs/delegation.c +++ b/fs/nfs/delegation.c @@ -85,6 +85,10 @@ int nfs_inode_set_delegation(struct inode *inode, struct rpc_cred *cred, struct struct nfs_delegation *delegation; int status = 0; + /* Ensure we first revalidate the attributes and page cache! */ + if ((nfsi->cache_validity & (NFS_INO_REVAL_PAGECACHE|NFS_INO_INVALID_ATTR))) + __nfs_revalidate_inode(NFS_SERVER(inode), inode); + delegation = nfs_alloc_delegation(); if (delegation == NULL) return -ENOMEM; diff --git a/fs/nfs/file.c b/fs/nfs/file.c index f6b9eda..6bdcfa9 100644 --- a/fs/nfs/file.c +++ b/fs/nfs/file.c @@ -137,7 +137,8 @@ static int nfs_revalidate_file(struct inode *inode, struct file *filp) struct nfs_inode *nfsi = NFS_I(inode); int retval = 0; - if ((nfsi->cache_validity & NFS_INO_REVAL_PAGECACHE) || nfs_attribute_timeout(inode)) + if ((nfsi->cache_validity & (NFS_INO_REVAL_PAGECACHE|NFS_INO_INVALID_ATTR)) + || nfs_attribute_timeout(inode)) retval = __nfs_revalidate_inode(NFS_SERVER(inode), inode); nfs_revalidate_mapping(inode, filp->f_mapping); return 0; diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index 6922469..6be46d2 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -1226,10 +1226,6 @@ int nfs_refresh_inode(struct inode *inode, struct nfs_fattr *fattr) loff_t cur_size, new_isize; int data_unstable; - /* Do we hold a delegation? */ - if (nfs_have_delegation(inode, FMODE_READ)) - return 0; - spin_lock(&inode->i_lock); /* Are we in the process of updating data on the server? */ @@ -1350,7 +1346,8 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr, unsign nfsi->read_cache_jiffies = fattr->timestamp; /* Are we racing with known updates of the metadata on the server? */ - data_unstable = ! nfs_verify_change_attribute(inode, verifier); + data_unstable = ! (nfs_verify_change_attribute(inode, verifier) || + (nfsi->cache_validity & NFS_INO_REVAL_PAGECACHE)); /* Check if our cached file size is stale */ new_isize = nfs_size_to_loff_t(fattr->size); -- cgit v0.10.2 From 6ce969171d5187f7621be68c0ebbc7fb02ec53f1 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 17 Oct 2005 06:03:23 -0400 Subject: [PATCH] NFS: Fix Oopsable/unnecessary i_count manipulations in nfs_wait_on_inode() Oopsable since nfs_wait_on_inode() can get called as part of iput_final(). Unnecessary since the caller had better be damned sure that the inode won't disappear from underneath it anyway. Signed-off-by: Trond Myklebust Signed-off-by: Linus Torvalds diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index 6be46d2..d4eadee 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -877,12 +877,10 @@ static int nfs_wait_on_inode(struct inode *inode) sigset_t oldmask; int error; - atomic_inc(&inode->i_count); rpc_clnt_sigmask(clnt, &oldmask); error = wait_on_bit_lock(&nfsi->flags, NFS_INO_REVALIDATING, nfs_wait_schedule, TASK_INTERRUPTIBLE); rpc_clnt_sigunmask(clnt, &oldmask); - iput(inode); return error; } -- cgit v0.10.2 From 47d6b08334a43fafa61a587f721fa21ef65d81be Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 17 Oct 2005 18:49:42 +0400 Subject: [PATCH] posix-timers: fix task accounting Make sure we release the task struct properly when releasing pending timers. release_task() does write_lock_irq(&tasklist_lock), so it can't race with run_posix_cpu_timers() on any cpu. Signed-off-by: Oleg Nesterov Signed-off-by: Linus Torvalds diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c index ad85d3f..7a51a55 100644 --- a/kernel/posix-cpu-timers.c +++ b/kernel/posix-cpu-timers.c @@ -424,6 +424,7 @@ static void cleanup_timers(struct list_head *head, cputime_t ptime = cputime_add(utime, stime); list_for_each_entry_safe(timer, next, head, entry) { + put_task_struct(timer->task); timer->task = NULL; list_del_init(&timer->entry); if (cputime_lt(timer->expires.cpu, ptime)) { @@ -436,6 +437,7 @@ static void cleanup_timers(struct list_head *head, ++head; list_for_each_entry_safe(timer, next, head, entry) { + put_task_struct(timer->task); timer->task = NULL; list_del_init(&timer->entry); if (cputime_lt(timer->expires.cpu, utime)) { @@ -448,6 +450,7 @@ static void cleanup_timers(struct list_head *head, ++head; list_for_each_entry_safe(timer, next, head, entry) { + put_task_struct(timer->task); timer->task = NULL; list_del_init(&timer->entry); if (timer->expires.sched < sched_time) { -- cgit v0.10.2 From cc675230a9ca17010694bc8bd3c69ca9adf2efef Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 17 Oct 2005 13:01:57 -0400 Subject: [PATCH] Fix and clean up quirk_intel_ide_combined() configuration This change makes quirk_intel_ide_combined() dependent on the precise conditions under which it is needed: * IDE is built in * IDE SATA option is not set * ata_piix or ahci drivers are enabled This fixes an issue where some modular configurations would not cause the quirk to be enabled. Signed-off-by: Jeff Garzik Signed-off-by: Linus torvalds diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 11ca4438..a6a630a 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1233,7 +1233,7 @@ static void __init quirk_alder_ioapic(struct pci_dev *pdev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic ); #endif -#ifdef CONFIG_SCSI_SATA +#ifdef CONFIG_SCSI_SATA_INTEL_COMBINED static void __devinit quirk_intel_ide_combined(struct pci_dev *pdev) { u8 prog, comb, tmp; @@ -1310,7 +1310,7 @@ static void __devinit quirk_intel_ide_combined(struct pci_dev *pdev) request_region(0x170, 8, "libata"); /* port 1 */ } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_intel_ide_combined ); -#endif /* CONFIG_SCSI_SATA */ +#endif /* CONFIG_SCSI_SATA_INTEL_COMBINED */ int pcie_mch_quirk; diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 20019b8..3ee9b8b 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -553,6 +553,11 @@ config SCSI_SATA_VITESSE If unsure, say N. +config SCSI_SATA_INTEL_COMBINED + bool + depends on IDE=y && !BLK_DEV_IDE_SATA && (SCSI_SATA_AHCI || SCSI_ATA_PIIX) + default y + config SCSI_BUSLOGIC tristate "BusLogic SCSI support" depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API -- cgit v0.10.2 From 5ee832dbc6770135ec8d63296af0a4374557bb79 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 17 Oct 2005 20:01:21 +0200 Subject: [PATCH] rcu: keep rcu callback event counter This makes call_rcu() keep track of how many events there are on the RCU list, and cause a reschedule event when the list gets too long. This helps keep RCU event lists down. Signed-off-by: Linus Torvalds diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 4e65eb4..70191a5 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -94,6 +94,7 @@ struct rcu_data { long batch; /* Batch # for current RCU batch */ struct rcu_head *nxtlist; struct rcu_head **nxttail; + long count; /* # of queued items */ struct rcu_head *curlist; struct rcu_head **curtail; struct rcu_head *donelist; diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c index dd99415..2559d4b 100644 --- a/kernel/rcupdate.c +++ b/kernel/rcupdate.c @@ -109,6 +109,10 @@ void fastcall call_rcu(struct rcu_head *head, rdp = &__get_cpu_var(rcu_data); *rdp->nxttail = head; rdp->nxttail = &head->next; + + if (unlikely(++rdp->count > 10000)) + set_need_resched(); + local_irq_restore(flags); } @@ -140,6 +144,12 @@ void fastcall call_rcu_bh(struct rcu_head *head, rdp = &__get_cpu_var(rcu_bh_data); *rdp->nxttail = head; rdp->nxttail = &head->next; + rdp->count++; +/* + * Should we directly call rcu_do_batch() here ? + * if (unlikely(rdp->count > 10000)) + * rcu_do_batch(rdp); + */ local_irq_restore(flags); } @@ -157,6 +167,7 @@ static void rcu_do_batch(struct rcu_data *rdp) next = rdp->donelist = list->next; list->func(list); list = next; + rdp->count--; if (++count >= maxbatch) break; } -- cgit v0.10.2 From b65574fec5db1211bce7fc8bec7a2b32486e0670 Mon Sep 17 00:00:00 2001 From: David McCullough Date: Mon, 17 Oct 2005 16:43:29 -0700 Subject: [PATCH] output of /proc/maps on nommu systems is incomplete Currently you do not get all the map entries on nommu systems because the start function doesn't index into the list using the value of "pos". Signed-off-by: David McCullough Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/proc/nommu.c b/fs/proc/nommu.c index f3bf016..cff10ab 100644 --- a/fs/proc/nommu.c +++ b/fs/proc/nommu.c @@ -91,6 +91,7 @@ static void *nommu_vma_list_start(struct seq_file *m, loff_t *_pos) next = _rb; break; } + pos--; } return next; -- cgit v0.10.2 From 9ac0b9c1927228a38a71216536176af8811a435a Mon Sep 17 00:00:00 2001 From: Stephan Brodkorb Date: Mon, 17 Oct 2005 16:43:30 -0700 Subject: [PATCH] n_r3964 mod_timer() fix Since Revision 1.10 was released the n_r3964 module wasn't able to receive any data. The reason for that behavior is because there were some wrong calls of mod_timer(...) in the function receive_char (...). This patch should fix this problem and was successfully tested with talking to some kuka industrial robots. Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c index 97d6dc2..853c98c 100644 --- a/drivers/char/n_r3964.c +++ b/drivers/char/n_r3964.c @@ -695,7 +695,7 @@ static void receive_char(struct r3964_info *pInfo, const unsigned char c) { TRACE_PE("IDLE - got STX but no space in rx_queue!"); pInfo->state=R3964_WAIT_FOR_RX_BUF; - mod_timer(&pInfo->tmr, R3964_TO_NO_BUF); + mod_timer(&pInfo->tmr, jiffies + R3964_TO_NO_BUF); break; } start_receiving: @@ -705,7 +705,7 @@ start_receiving: pInfo->last_rx = 0; pInfo->flags &= ~R3964_ERROR; pInfo->state=R3964_RECEIVING; - mod_timer(&pInfo->tmr, R3964_TO_ZVZ); + mod_timer(&pInfo->tmr, jiffies + R3964_TO_ZVZ); pInfo->nRetry = 0; put_char(pInfo, DLE); flush(pInfo); @@ -732,7 +732,7 @@ start_receiving: if(pInfo->flags & R3964_BCC) { pInfo->state = R3964_WAIT_FOR_BCC; - mod_timer(&pInfo->tmr, R3964_TO_ZVZ); + mod_timer(&pInfo->tmr, jiffies + R3964_TO_ZVZ); } else { @@ -744,7 +744,7 @@ start_receiving: pInfo->last_rx = c; char_to_buf: pInfo->rx_buf[pInfo->rx_position++] = c; - mod_timer(&pInfo->tmr, R3964_TO_ZVZ); + mod_timer(&pInfo->tmr, jiffies + R3964_TO_ZVZ); } } /* else: overflow-msg? BUF_SIZE>MTU; should not happen? */ -- cgit v0.10.2 From 5cc9eeef9a9567acdfc2f6943f24381bf460f008 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Mon, 17 Oct 2005 16:43:31 -0700 Subject: [PATCH] Fix /proc/acpi/events around suspend Fix -EIO on /proc/acpi/events after suspends. This actually breaks suspending by power button in many setups. Signed-off-by: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/acpi/event.c b/drivers/acpi/event.c index bfa8b76..2dbb1b0 100644 --- a/drivers/acpi/event.c +++ b/drivers/acpi/event.c @@ -58,9 +58,8 @@ acpi_system_read_event(struct file *file, char __user * buffer, size_t count, return_VALUE(-EAGAIN); result = acpi_bus_receive_event(&event); - if (result) { - return_VALUE(-EIO); - } + if (result) + return_VALUE(result); chars_remaining = sprintf(str, "%s %s %08x %08x\n", event.device_class ? event. -- cgit v0.10.2 From e7507ed91e093b9e4e218e41ebfdce05458258fc Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 17 Oct 2005 16:43:32 -0700 Subject: [PATCH] uniput - fix crash on SMP Only signal completion after marking request slot as free, otherwise other processor can free request structure before we finish using it. Signed-off-by: Dmitry Torokhov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c index d5c5b32..4015a91 100644 --- a/drivers/input/misc/uinput.c +++ b/drivers/input/misc/uinput.c @@ -90,11 +90,11 @@ static inline int uinput_request_reserve_slot(struct uinput_device *udev, struct static void uinput_request_done(struct uinput_device *udev, struct uinput_request *request) { - complete(&request->done); - /* Mark slot as available */ udev->requests[request->id] = NULL; wake_up_interruptible(&udev->requests_waitq); + + complete(&request->done); } static int uinput_request_submit(struct input_dev *dev, struct uinput_request *request) -- cgit v0.10.2 From 4faa5285283fad081443e3612ca426a311bb6c7e Mon Sep 17 00:00:00 2001 From: Zach Brown Date: Mon, 17 Oct 2005 16:43:33 -0700 Subject: [PATCH] aio: revert lock_kiocb() lock_kiocb() was introduced to serialize retrying and cancellation. In the process of doing so it tried to sleep waiting for KIF_LOCKED while holding the ctx_lock spinlock. Recent fixes have ensured that multiple concurrent retries won't be attempted for a given iocb. Cancel has other problems and has no significant in-tree users that have been complaining about it. So for the immediate future we'll revert sleeping with the lock held and will address proper cancellation and retry serialization in the future. Signed-off-by: Zach Brown Acked-by: Benjamin LaHaise Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/aio.c b/fs/aio.c index d6b1551..9fe7216 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -398,7 +398,7 @@ static struct kiocb fastcall *__aio_get_req(struct kioctx *ctx) if (unlikely(!req)) return NULL; - req->ki_flags = 1 << KIF_LOCKED; + req->ki_flags = 0; req->ki_users = 2; req->ki_key = 0; req->ki_ctx = ctx; @@ -547,25 +547,6 @@ struct kioctx *lookup_ioctx(unsigned long ctx_id) return ioctx; } -static int lock_kiocb_action(void *param) -{ - schedule(); - return 0; -} - -static inline void lock_kiocb(struct kiocb *iocb) -{ - wait_on_bit_lock(&iocb->ki_flags, KIF_LOCKED, lock_kiocb_action, - TASK_UNINTERRUPTIBLE); -} - -static inline void unlock_kiocb(struct kiocb *iocb) -{ - kiocbClearLocked(iocb); - smp_mb__after_clear_bit(); - wake_up_bit(&iocb->ki_flags, KIF_LOCKED); -} - /* * use_mm * Makes the calling kernel thread take on the specified @@ -796,9 +777,7 @@ static int __aio_run_iocbs(struct kioctx *ctx) * Hold an extra reference while retrying i/o. */ iocb->ki_users++; /* grab extra reference */ - lock_kiocb(iocb); aio_run_iocb(iocb); - unlock_kiocb(iocb); if (__aio_put_req(ctx, iocb)) /* drop extra ref */ put_ioctx(ctx); } @@ -1542,7 +1521,6 @@ int fastcall io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb, spin_lock_irq(&ctx->ctx_lock); aio_run_iocb(req); - unlock_kiocb(req); if (!list_empty(&ctx->run_list)) { /* drain the run list */ while (__aio_run_iocbs(ctx)) @@ -1674,7 +1652,6 @@ asmlinkage long sys_io_cancel(aio_context_t ctx_id, struct iocb __user *iocb, if (NULL != cancel) { struct io_event tmp; pr_debug("calling cancel\n"); - lock_kiocb(kiocb); memset(&tmp, 0, sizeof(tmp)); tmp.obj = (u64)(unsigned long)kiocb->ki_obj.user; tmp.data = kiocb->ki_user_data; @@ -1686,7 +1663,6 @@ asmlinkage long sys_io_cancel(aio_context_t ctx_id, struct iocb __user *iocb, if (copy_to_user(result, &tmp, sizeof(tmp))) ret = -EFAULT; } - unlock_kiocb(kiocb); } else ret = -EINVAL; diff --git a/include/linux/aio.h b/include/linux/aio.h index 60def65..0decf66 100644 --- a/include/linux/aio.h +++ b/include/linux/aio.h @@ -24,7 +24,12 @@ struct kioctx; #define KIOCB_SYNC_KEY (~0U) /* ki_flags bits */ -#define KIF_LOCKED 0 +/* + * This may be used for cancel/retry serialization in the future, but + * for now it's unused and we probably don't want modules to even + * think they can use it. + */ +/* #define KIF_LOCKED 0 */ #define KIF_KICKED 1 #define KIF_CANCELLED 2 -- cgit v0.10.2 From 39ca371c45b04cd50d0974030ae051906fc516b6 Mon Sep 17 00:00:00 2001 From: Mark Rustad Date: Mon, 17 Oct 2005 16:43:34 -0700 Subject: [PATCH] kbuild: Eliminate build error when KALLSYMS not defined The following build error happens with 2.6.14-rc4 when CONFIG_KALLSYMS is not defined. The error message in a fragment of the output was: CC arch/i386/lib/usercopy.o AR arch/i386/lib/lib.a /bin/sh: line 1: +@: command not found make[3]: warning: jobserver unavailable: using -j1. Add `+' to parent make rule. CHK include/linux/compile.h Signed-off-by: Mark Rustad Signed-off-by: Sam Ravnborg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Makefile b/Makefile index 504ba3c..be33d75 100644 --- a/Makefile +++ b/Makefile @@ -660,8 +660,10 @@ quiet_cmd_sysmap = SYSMAP # Link of vmlinux # If CONFIG_KALLSYMS is set .version is already updated # Generate System.map and verify that the content is consistent - +# Use + in front of the vmlinux_version rule to silent warning with make -j2 +# First command is ':' to allow us to use + in front of the rule define rule_vmlinux__ + : $(if $(CONFIG_KALLSYMS),,+$(call cmd,vmlinux_version)) $(call cmd,vmlinux__) -- cgit v0.10.2 From 07506697d1c615924298406f2357810709c09bcd Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Wed, 12 Oct 2005 15:04:18 +0800 Subject: [PATCH] libata CHS: move the initialization of taskfile LBA flags (revise #6) move the initialization of taskfile LBA flags "ATA_TFLAG_LBA" and "ATA_TFLAG_LBA48 flags" to the SCSI translation functions Signed-off-by: Albert Lee ============= Signed-off-by: Jeff Garzik diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index d568914..55d4dee 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3195,13 +3195,6 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, qc->nbytes = qc->curbytes = 0; ata_tf_init(ap, &qc->tf, dev->devno); - - if (dev->flags & ATA_DFLAG_LBA) { - qc->tf.flags |= ATA_TFLAG_LBA; - - if (dev->flags & ATA_DFLAG_LBA48) - qc->tf.flags |= ATA_TFLAG_LBA48; - } } return qc; diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index c64169c..ea7a4d8 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -492,7 +492,7 @@ static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) tf->flags |= ATA_TFLAG_DEVICE; tf->protocol = ATA_PROT_NODATA; - if ((tf->flags & ATA_TFLAG_LBA48) && + if ((qc->dev->flags & ATA_DFLAG_LBA48) && (ata_id_has_flush_ext(qc->dev->id))) tf->command = ATA_CMD_FLUSH_EXT; else @@ -612,8 +612,6 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) { struct ata_taskfile *tf = &qc->tf; struct ata_device *dev = qc->dev; - unsigned int lba = tf->flags & ATA_TFLAG_LBA; - unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48; u64 dev_sectors = qc->dev->n_sectors; u64 block; u32 n_block; @@ -634,16 +632,16 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) goto out_of_range; if ((block + n_block) > dev_sectors) goto out_of_range; - if (lba48) { - if (n_block > (64 * 1024)) - goto invalid_fld; - } else { - if (n_block > 256) - goto invalid_fld; - } - if (lba) { - if (lba48) { + if (dev->flags & ATA_DFLAG_LBA) { + tf->flags |= ATA_TFLAG_LBA; + + if (dev->flags & ATA_DFLAG_LBA48) { + if (n_block > (64 * 1024)) + goto invalid_fld; + + /* use LBA48 */ + tf->flags |= ATA_TFLAG_LBA48; tf->command = ATA_CMD_VERIFY_EXT; tf->hob_nsect = (n_block >> 8) & 0xff; @@ -652,6 +650,10 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) tf->hob_lbam = (block >> 32) & 0xff; tf->hob_lbal = (block >> 24) & 0xff; } else { + if (n_block > 256) + goto invalid_fld; + + /* use LBA28 */ tf->command = ATA_CMD_VERIFY; tf->device |= (block >> 24) & 0xf; @@ -668,6 +670,9 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) /* CHS */ u32 sect, head, cyl, track; + if (n_block > 256) + goto invalid_fld; + /* Convert LBA to CHS */ track = (u32)block / dev->sectors; cyl = track / dev->heads; @@ -733,8 +738,6 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) { struct ata_taskfile *tf = &qc->tf; struct ata_device *dev = qc->dev; - unsigned int lba = tf->flags & ATA_TFLAG_LBA; - unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48; u64 block; u32 n_block; @@ -783,19 +786,24 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) */ goto nothing_to_do; - if (lba) { - if (lba48) { + if (dev->flags & ATA_DFLAG_LBA) { + tf->flags |= ATA_TFLAG_LBA; + + if (dev->flags & ATA_DFLAG_LBA48) { /* The request -may- be too large for LBA48. */ if ((block >> 48) || (n_block > 65536)) goto out_of_range; + /* use LBA48 */ + tf->flags |= ATA_TFLAG_LBA48; + tf->hob_nsect = (n_block >> 8) & 0xff; tf->hob_lbah = (block >> 40) & 0xff; tf->hob_lbam = (block >> 32) & 0xff; tf->hob_lbal = (block >> 24) & 0xff; } else { - /* LBA28 */ + /* use LBA28 */ /* The request -may- be too large for LBA28. */ if ((block >> 28) || (n_block > 256)) -- cgit v0.10.2 From 8cbd6df1f0ce977ab7b61feffa59879bb5e0ed8f Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Wed, 12 Oct 2005 15:06:27 +0800 Subject: [PATCH] libata CHS: calculate read/write commands and protocol on the fly (revise #6) - merge ata_prot_to_cmd() and ata_dev_set_protocol() as ata_rwcmd_protocol() - pave road for read/write multiple support - remove usage of pre-cached command and protocol values and call ata_rwcmd_protocol() instead Signed-off-by: Albert Lee ============== Signed-off-by: Jeff Garzik diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 55d4dee..19d3d71 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -616,79 +616,53 @@ void ata_tf_from_fis(u8 *fis, struct ata_taskfile *tf) tf->hob_nsect = fis[13]; } -/** - * ata_prot_to_cmd - determine which read/write opcodes to use - * @protocol: ATA_PROT_xxx taskfile protocol - * @lba48: true is lba48 is present - * - * Given necessary input, determine which read/write commands - * to use to transfer data. - * - * LOCKING: - * None. - */ -static int ata_prot_to_cmd(int protocol, int lba48) -{ - int rcmd = 0, wcmd = 0; - - switch (protocol) { - case ATA_PROT_PIO: - if (lba48) { - rcmd = ATA_CMD_PIO_READ_EXT; - wcmd = ATA_CMD_PIO_WRITE_EXT; - } else { - rcmd = ATA_CMD_PIO_READ; - wcmd = ATA_CMD_PIO_WRITE; - } - break; - - case ATA_PROT_DMA: - if (lba48) { - rcmd = ATA_CMD_READ_EXT; - wcmd = ATA_CMD_WRITE_EXT; - } else { - rcmd = ATA_CMD_READ; - wcmd = ATA_CMD_WRITE; - } - break; - - default: - return -1; - } - - return rcmd | (wcmd << 8); -} +static const u8 ata_rw_cmds[] = { + /* pio multi */ + ATA_CMD_READ_MULTI, + ATA_CMD_WRITE_MULTI, + ATA_CMD_READ_MULTI_EXT, + ATA_CMD_WRITE_MULTI_EXT, + /* pio */ + ATA_CMD_PIO_READ, + ATA_CMD_PIO_WRITE, + ATA_CMD_PIO_READ_EXT, + ATA_CMD_PIO_WRITE_EXT, + /* dma */ + ATA_CMD_READ, + ATA_CMD_WRITE, + ATA_CMD_READ_EXT, + ATA_CMD_WRITE_EXT +}; /** - * ata_dev_set_protocol - set taskfile protocol and r/w commands - * @dev: device to examine and configure + * ata_rwcmd_protocol - set taskfile r/w commands and protocol + * @qc: command to examine and configure * - * Examine the device configuration, after we have - * read the identify-device page and configured the - * data transfer mode. Set internal state related to - * the ATA taskfile protocol (pio, pio mult, dma, etc.) - * and calculate the proper read/write commands to use. + * Examine the device configuration and tf->flags to calculate + * the proper read/write commands and protocol to use. * * LOCKING: * caller. */ -static void ata_dev_set_protocol(struct ata_device *dev) +void ata_rwcmd_protocol(struct ata_queued_cmd *qc) { - int pio = (dev->flags & ATA_DFLAG_PIO); - int lba48 = (dev->flags & ATA_DFLAG_LBA48); - int proto, cmd; + struct ata_taskfile *tf = &qc->tf; + struct ata_device *dev = qc->dev; - if (pio) - proto = dev->xfer_protocol = ATA_PROT_PIO; - else - proto = dev->xfer_protocol = ATA_PROT_DMA; + int index, lba48, write; + + lba48 = (tf->flags & ATA_TFLAG_LBA48) ? 2 : 0; + write = (tf->flags & ATA_TFLAG_WRITE) ? 1 : 0; - cmd = ata_prot_to_cmd(proto, lba48); - if (cmd < 0) - BUG(); + if (dev->flags & ATA_DFLAG_PIO) { + tf->protocol = ATA_PROT_PIO; + index = dev->multi_count ? 0 : 4; + } else { + tf->protocol = ATA_PROT_DMA; + index = 8; + } - dev->read_cmd = cmd & 0xff; - dev->write_cmd = (cmd >> 8) & 0xff; + tf->command = ata_rw_cmds[index + lba48 + write]; } static const char * xfer_mode_str[] = { @@ -1641,7 +1615,7 @@ static void ata_host_set_dma(struct ata_port *ap, u8 xfer_mode, */ static void ata_set_mode(struct ata_port *ap) { - unsigned int i, xfer_shift; + unsigned int xfer_shift; u8 xfer_mode; int rc; @@ -1670,11 +1644,6 @@ static void ata_set_mode(struct ata_port *ap) if (ap->ops->post_set_mode) ap->ops->post_set_mode(ap); - for (i = 0; i < 2; i++) { - struct ata_device *dev = &ap->device[i]; - ata_dev_set_protocol(dev); - } - return; err_out: diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index ea7a4d8..90bf222 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -742,15 +742,10 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) u32 n_block; tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - tf->protocol = qc->dev->xfer_protocol; - if (scsicmd[0] == READ_10 || scsicmd[0] == READ_6 || - scsicmd[0] == READ_16) { - tf->command = qc->dev->read_cmd; - } else { - tf->command = qc->dev->write_cmd; + if (scsicmd[0] == WRITE_10 || scsicmd[0] == WRITE_6 || + scsicmd[0] == WRITE_16) tf->flags |= ATA_TFLAG_WRITE; - } /* Calculate the SCSI LBA and transfer length. */ switch (scsicmd[0]) { @@ -812,6 +807,8 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) tf->device |= (block >> 24) & 0xf; } + ata_rwcmd_protocol(qc); + qc->nsect = n_block; tf->nsect = n_block & 0xff; @@ -828,6 +825,8 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) if ((block >> 28) || (n_block > 256)) goto out_of_range; + ata_rwcmd_protocol(qc); + /* Convert LBA to CHS */ track = (u32)block / dev->sectors; cyl = track / dev->heads; diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index a18f2ac..67d752c 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -42,6 +42,7 @@ extern int atapi_enabled; extern int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat); extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, struct ata_device *dev); +extern void ata_rwcmd_protocol(struct ata_queued_cmd *qc); extern void ata_qc_free(struct ata_queued_cmd *qc); extern int ata_qc_issue(struct ata_queued_cmd *qc); extern int ata_check_atapi_dma(struct ata_queued_cmd *qc); diff --git a/include/linux/ata.h b/include/linux/ata.h index ecb7346..630908c 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -128,6 +128,10 @@ enum { ATA_CMD_PIO_READ_EXT = 0x24, ATA_CMD_PIO_WRITE = 0x30, ATA_CMD_PIO_WRITE_EXT = 0x34, + ATA_CMD_READ_MULTI = 0xC4, + ATA_CMD_READ_MULTI_EXT = 0x29, + ATA_CMD_WRITE_MULTI = 0xC5, + ATA_CMD_WRITE_MULTI_EXT = 0x39, ATA_CMD_SET_FEATURES = 0xEF, ATA_CMD_PACKET = 0xA0, ATA_CMD_VERIFY = 0x40, diff --git a/include/linux/libata.h b/include/linux/libata.h index 7929cfc..0261c55 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -283,10 +283,8 @@ struct ata_device { u8 xfer_mode; unsigned int xfer_shift; /* ATA_SHIFT_xxx */ - /* cache info about current transfer mode */ - u8 xfer_protocol; /* taskfile xfer protocol */ - u8 read_cmd; /* opcode to use on read */ - u8 write_cmd; /* opcode to use on write */ + unsigned int multi_count; /* sectors count for + READ/WRITE MULTIPLE */ /* for CHS addressing */ u16 cylinders; /* Number of cylinders */ -- cgit v0.10.2 From 59a10b172fccaea793352c00fd9065f0a5b4ef70 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Wed, 12 Oct 2005 15:09:42 +0800 Subject: [PATCH] libata CHS: reread device identify info (revise #6) problem: id[53-58] might be changed after initializing device CHS settings. changes: - call ata_dev_reread_id() to reread the identify device info, after initializing device CHS settings. Signed-off-by: Albert Lee ============ Signed-off-by: Jeff Garzik diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 19d3d71..175d464 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -63,6 +63,7 @@ static unsigned int ata_busy_sleep (struct ata_port *ap, unsigned long tmout_pat, unsigned long tmout); +static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev); static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev); static void ata_set_mode(struct ata_port *ap); static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev); @@ -1240,9 +1241,15 @@ retry: * anything else.. * Some drives were very specific about that exact sequence. */ - if (major_version < 4 || (!ata_id_has_lba(dev->id))) + if (major_version < 4 || (!ata_id_has_lba(dev->id))) { ata_dev_init_params(ap, dev); + /* current CHS translation info (id[53-58]) might be + * changed. reread the identify device info. + */ + ata_dev_reread_id(ap, dev); + } + if (ata_id_has_lba(dev->id)) { dev->flags |= ATA_DFLAG_LBA; @@ -2151,6 +2158,62 @@ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev) } /** + * ata_dev_reread_id - Reread the device identify device info + * @ap: port where the device is + * @dev: device to reread the identify device info + * + * LOCKING: + */ + +static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev) +{ + DECLARE_COMPLETION(wait); + struct ata_queued_cmd *qc; + unsigned long flags; + int rc; + + qc = ata_qc_new_init(ap, dev); + BUG_ON(qc == NULL); + + ata_sg_init_one(qc, dev->id, sizeof(dev->id)); + qc->dma_dir = DMA_FROM_DEVICE; + + if (dev->class == ATA_DEV_ATA) { + qc->tf.command = ATA_CMD_ID_ATA; + DPRINTK("do ATA identify\n"); + } else { + qc->tf.command = ATA_CMD_ID_ATAPI; + DPRINTK("do ATAPI identify\n"); + } + + qc->tf.flags |= ATA_TFLAG_DEVICE; + qc->tf.protocol = ATA_PROT_PIO; + qc->nsect = 1; + + qc->waiting = &wait; + qc->complete_fn = ata_qc_complete_noop; + + spin_lock_irqsave(&ap->host_set->lock, flags); + rc = ata_qc_issue(qc); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + if (rc) + goto err_out; + + wait_for_completion(&wait); + + swap_buf_le16(dev->id, ATA_ID_WORDS); + + ata_dump_id(dev); + + DPRINTK("EXIT\n"); + + return; +err_out: + ata_port_disable(ap); +} + +/** * ata_dev_init_params - Issue INIT DEV PARAMS command * @ap: Port associated with device @dev * @dev: Device to which command will be sent -- cgit v0.10.2