From be2de99beaca6506a1f97a636750c108a41b5c00 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 10 May 2011 15:42:08 +0200 Subject: [CPUFREQ/S3C64xx] Move S3C64xx CPUfreq driver into drivers/cpufreq This is a straight code motion patch, there are no changes to the driver itself. The Kconfig is left untouched as the ARM CPUfreq Kconfig is all in one big block in arm/Kconfig and should be moved en masse rather than being done piecemeal. Signed-off-by: Mark Brown Signed-off-by: Dave Jones diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index 4657363..f5a7144 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -23,10 +23,6 @@ obj-$(CONFIG_CPU_S3C6410) += s3c6410.o obj-y += irq.o obj-y += irq-eint.o -# CPU frequency scaling - -obj-$(CONFIG_CPU_FREQ_S3C64XX) += cpufreq.o - # DMA support obj-$(CONFIG_S3C64XX_DMA) += dma.o diff --git a/arch/arm/mach-s3c64xx/cpufreq.c b/arch/arm/mach-s3c64xx/cpufreq.c deleted file mode 100644 index 4375b97..0000000 --- a/arch/arm/mach-s3c64xx/cpufreq.c +++ /dev/null @@ -1,270 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/cpufreq.c - * - * Copyright 2009 Wolfson Microelectronics plc - * - * S3C64xx CPUfreq Support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include - -static struct clk *armclk; -static struct regulator *vddarm; -static unsigned long regulator_latency; - -#ifdef CONFIG_CPU_S3C6410 -struct s3c64xx_dvfs { - unsigned int vddarm_min; - unsigned int vddarm_max; -}; - -static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = { - [0] = { 1000000, 1150000 }, - [1] = { 1050000, 1150000 }, - [2] = { 1100000, 1150000 }, - [3] = { 1200000, 1350000 }, -}; - -static struct cpufreq_frequency_table s3c64xx_freq_table[] = { - { 0, 66000 }, - { 0, 133000 }, - { 1, 222000 }, - { 1, 266000 }, - { 2, 333000 }, - { 2, 400000 }, - { 2, 532000 }, - { 2, 533000 }, - { 3, 667000 }, - { 0, CPUFREQ_TABLE_END }, -}; -#endif - -static int s3c64xx_cpufreq_verify_speed(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - - return cpufreq_frequency_table_verify(policy, s3c64xx_freq_table); -} - -static unsigned int s3c64xx_cpufreq_get_speed(unsigned int cpu) -{ - if (cpu != 0) - return 0; - - return clk_get_rate(armclk) / 1000; -} - -static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - int ret; - unsigned int i; - struct cpufreq_freqs freqs; - struct s3c64xx_dvfs *dvfs; - - ret = cpufreq_frequency_table_target(policy, s3c64xx_freq_table, - target_freq, relation, &i); - if (ret != 0) - return ret; - - freqs.cpu = 0; - freqs.old = clk_get_rate(armclk) / 1000; - freqs.new = s3c64xx_freq_table[i].frequency; - freqs.flags = 0; - dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].index]; - - if (freqs.old == freqs.new) - return 0; - - pr_debug("cpufreq: Transition %d-%dkHz\n", freqs.old, freqs.new); - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - -#ifdef CONFIG_REGULATOR - if (vddarm && freqs.new > freqs.old) { - ret = regulator_set_voltage(vddarm, - dvfs->vddarm_min, - dvfs->vddarm_max); - if (ret != 0) { - pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n", - freqs.new, ret); - goto err; - } - } -#endif - - ret = clk_set_rate(armclk, freqs.new * 1000); - if (ret < 0) { - pr_err("cpufreq: Failed to set rate %dkHz: %d\n", - freqs.new, ret); - goto err; - } - -#ifdef CONFIG_REGULATOR - if (vddarm && freqs.new < freqs.old) { - ret = regulator_set_voltage(vddarm, - dvfs->vddarm_min, - dvfs->vddarm_max); - if (ret != 0) { - pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n", - freqs.new, ret); - goto err_clk; - } - } -#endif - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - pr_debug("cpufreq: Set actual frequency %lukHz\n", - clk_get_rate(armclk) / 1000); - - return 0; - -err_clk: - if (clk_set_rate(armclk, freqs.old * 1000) < 0) - pr_err("Failed to restore original clock rate\n"); -err: - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return ret; -} - -#ifdef CONFIG_REGULATOR -static void __init s3c64xx_cpufreq_config_regulator(void) -{ - int count, v, i, found; - struct cpufreq_frequency_table *freq; - struct s3c64xx_dvfs *dvfs; - - count = regulator_count_voltages(vddarm); - if (count < 0) { - pr_err("cpufreq: Unable to check supported voltages\n"); - } - - freq = s3c64xx_freq_table; - while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) { - if (freq->frequency == CPUFREQ_ENTRY_INVALID) - continue; - - dvfs = &s3c64xx_dvfs_table[freq->index]; - found = 0; - - for (i = 0; i < count; i++) { - v = regulator_list_voltage(vddarm, i); - if (v >= dvfs->vddarm_min && v <= dvfs->vddarm_max) - found = 1; - } - - if (!found) { - pr_debug("cpufreq: %dkHz unsupported by regulator\n", - freq->frequency); - freq->frequency = CPUFREQ_ENTRY_INVALID; - } - - freq++; - } - - /* Guess based on having to do an I2C/SPI write; in future we - * will be able to query the regulator performance here. */ - regulator_latency = 1 * 1000 * 1000; -} -#endif - -static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy) -{ - int ret; - struct cpufreq_frequency_table *freq; - - if (policy->cpu != 0) - return -EINVAL; - - if (s3c64xx_freq_table == NULL) { - pr_err("cpufreq: No frequency information for this CPU\n"); - return -ENODEV; - } - - armclk = clk_get(NULL, "armclk"); - if (IS_ERR(armclk)) { - pr_err("cpufreq: Unable to obtain ARMCLK: %ld\n", - PTR_ERR(armclk)); - return PTR_ERR(armclk); - } - -#ifdef CONFIG_REGULATOR - vddarm = regulator_get(NULL, "vddarm"); - if (IS_ERR(vddarm)) { - ret = PTR_ERR(vddarm); - pr_err("cpufreq: Failed to obtain VDDARM: %d\n", ret); - pr_err("cpufreq: Only frequency scaling available\n"); - vddarm = NULL; - } else { - s3c64xx_cpufreq_config_regulator(); - } -#endif - - freq = s3c64xx_freq_table; - while (freq->frequency != CPUFREQ_TABLE_END) { - unsigned long r; - - /* Check for frequencies we can generate */ - r = clk_round_rate(armclk, freq->frequency * 1000); - r /= 1000; - if (r != freq->frequency) { - pr_debug("cpufreq: %dkHz unsupported by clock\n", - freq->frequency); - freq->frequency = CPUFREQ_ENTRY_INVALID; - } - - /* If we have no regulator then assume startup - * frequency is the maximum we can support. */ - if (!vddarm && freq->frequency > s3c64xx_cpufreq_get_speed(0)) - freq->frequency = CPUFREQ_ENTRY_INVALID; - - freq++; - } - - policy->cur = clk_get_rate(armclk) / 1000; - - /* Datasheet says PLL stabalisation time (if we were to use - * the PLLs, which we don't currently) is ~300us worst case, - * but add some fudge. - */ - policy->cpuinfo.transition_latency = (500 * 1000) + regulator_latency; - - ret = cpufreq_frequency_table_cpuinfo(policy, s3c64xx_freq_table); - if (ret != 0) { - pr_err("cpufreq: Failed to configure frequency table: %d\n", - ret); - regulator_put(vddarm); - clk_put(armclk); - } - - return ret; -} - -static struct cpufreq_driver s3c64xx_cpufreq_driver = { - .owner = THIS_MODULE, - .flags = 0, - .verify = s3c64xx_cpufreq_verify_speed, - .target = s3c64xx_cpufreq_set_target, - .get = s3c64xx_cpufreq_get_speed, - .init = s3c64xx_cpufreq_driver_init, - .name = "s3c", -}; - -static int __init s3c64xx_cpufreq_init(void) -{ - return cpufreq_register_driver(&s3c64xx_cpufreq_driver); -} -module_init(s3c64xx_cpufreq_init); diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index e2fc2d2..0fd8cae 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -41,3 +41,4 @@ obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o # ARM SoC drivers obj-$(CONFIG_UX500_SOC_DB8500) += db8500-cpufreq.o +obj-$(CONFIG_CPU_FREQ_S3C64XX) += s3c64xx.o diff --git a/drivers/cpufreq/s3c64xx.c b/drivers/cpufreq/s3c64xx.c new file mode 100644 index 0000000..fc3f180 --- /dev/null +++ b/drivers/cpufreq/s3c64xx.c @@ -0,0 +1,269 @@ +/* + * Copyright 2009 Wolfson Microelectronics plc + * + * S3C64xx CPUfreq Support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +static struct clk *armclk; +static struct regulator *vddarm; +static unsigned long regulator_latency; + +#ifdef CONFIG_CPU_S3C6410 +struct s3c64xx_dvfs { + unsigned int vddarm_min; + unsigned int vddarm_max; +}; + +static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = { + [0] = { 1000000, 1150000 }, + [1] = { 1050000, 1150000 }, + [2] = { 1100000, 1150000 }, + [3] = { 1200000, 1350000 }, +}; + +static struct cpufreq_frequency_table s3c64xx_freq_table[] = { + { 0, 66000 }, + { 0, 133000 }, + { 1, 222000 }, + { 1, 266000 }, + { 2, 333000 }, + { 2, 400000 }, + { 2, 532000 }, + { 2, 533000 }, + { 3, 667000 }, + { 0, CPUFREQ_TABLE_END }, +}; +#endif + +static int s3c64xx_cpufreq_verify_speed(struct cpufreq_policy *policy) +{ + if (policy->cpu != 0) + return -EINVAL; + + return cpufreq_frequency_table_verify(policy, s3c64xx_freq_table); +} + +static unsigned int s3c64xx_cpufreq_get_speed(unsigned int cpu) +{ + if (cpu != 0) + return 0; + + return clk_get_rate(armclk) / 1000; +} + +static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + int ret; + unsigned int i; + struct cpufreq_freqs freqs; + struct s3c64xx_dvfs *dvfs; + + ret = cpufreq_frequency_table_target(policy, s3c64xx_freq_table, + target_freq, relation, &i); + if (ret != 0) + return ret; + + freqs.cpu = 0; + freqs.old = clk_get_rate(armclk) / 1000; + freqs.new = s3c64xx_freq_table[i].frequency; + freqs.flags = 0; + dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].index]; + + if (freqs.old == freqs.new) + return 0; + + pr_debug("cpufreq: Transition %d-%dkHz\n", freqs.old, freqs.new); + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + +#ifdef CONFIG_REGULATOR + if (vddarm && freqs.new > freqs.old) { + ret = regulator_set_voltage(vddarm, + dvfs->vddarm_min, + dvfs->vddarm_max); + if (ret != 0) { + pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n", + freqs.new, ret); + goto err; + } + } +#endif + + ret = clk_set_rate(armclk, freqs.new * 1000); + if (ret < 0) { + pr_err("cpufreq: Failed to set rate %dkHz: %d\n", + freqs.new, ret); + goto err; + } + +#ifdef CONFIG_REGULATOR + if (vddarm && freqs.new < freqs.old) { + ret = regulator_set_voltage(vddarm, + dvfs->vddarm_min, + dvfs->vddarm_max); + if (ret != 0) { + pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n", + freqs.new, ret); + goto err_clk; + } + } +#endif + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + pr_debug("cpufreq: Set actual frequency %lukHz\n", + clk_get_rate(armclk) / 1000); + + return 0; + +err_clk: + if (clk_set_rate(armclk, freqs.old * 1000) < 0) + pr_err("Failed to restore original clock rate\n"); +err: + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + return ret; +} + +#ifdef CONFIG_REGULATOR +static void __init s3c64xx_cpufreq_config_regulator(void) +{ + int count, v, i, found; + struct cpufreq_frequency_table *freq; + struct s3c64xx_dvfs *dvfs; + + count = regulator_count_voltages(vddarm); + if (count < 0) { + pr_err("cpufreq: Unable to check supported voltages\n"); + } + + freq = s3c64xx_freq_table; + while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) { + if (freq->frequency == CPUFREQ_ENTRY_INVALID) + continue; + + dvfs = &s3c64xx_dvfs_table[freq->index]; + found = 0; + + for (i = 0; i < count; i++) { + v = regulator_list_voltage(vddarm, i); + if (v >= dvfs->vddarm_min && v <= dvfs->vddarm_max) + found = 1; + } + + if (!found) { + pr_debug("cpufreq: %dkHz unsupported by regulator\n", + freq->frequency); + freq->frequency = CPUFREQ_ENTRY_INVALID; + } + + freq++; + } + + /* Guess based on having to do an I2C/SPI write; in future we + * will be able to query the regulator performance here. */ + regulator_latency = 1 * 1000 * 1000; +} +#endif + +static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy) +{ + int ret; + struct cpufreq_frequency_table *freq; + + if (policy->cpu != 0) + return -EINVAL; + + if (s3c64xx_freq_table == NULL) { + pr_err("cpufreq: No frequency information for this CPU\n"); + return -ENODEV; + } + + armclk = clk_get(NULL, "armclk"); + if (IS_ERR(armclk)) { + pr_err("cpufreq: Unable to obtain ARMCLK: %ld\n", + PTR_ERR(armclk)); + return PTR_ERR(armclk); + } + +#ifdef CONFIG_REGULATOR + vddarm = regulator_get(NULL, "vddarm"); + if (IS_ERR(vddarm)) { + ret = PTR_ERR(vddarm); + pr_err("cpufreq: Failed to obtain VDDARM: %d\n", ret); + pr_err("cpufreq: Only frequency scaling available\n"); + vddarm = NULL; + } else { + s3c64xx_cpufreq_config_regulator(); + } +#endif + + freq = s3c64xx_freq_table; + while (freq->frequency != CPUFREQ_TABLE_END) { + unsigned long r; + + /* Check for frequencies we can generate */ + r = clk_round_rate(armclk, freq->frequency * 1000); + r /= 1000; + if (r != freq->frequency) { + pr_debug("cpufreq: %dkHz unsupported by clock\n", + freq->frequency); + freq->frequency = CPUFREQ_ENTRY_INVALID; + } + + /* If we have no regulator then assume startup + * frequency is the maximum we can support. */ + if (!vddarm && freq->frequency > s3c64xx_cpufreq_get_speed(0)) + freq->frequency = CPUFREQ_ENTRY_INVALID; + + freq++; + } + + policy->cur = clk_get_rate(armclk) / 1000; + + /* Datasheet says PLL stabalisation time (if we were to use + * the PLLs, which we don't currently) is ~300us worst case, + * but add some fudge. + */ + policy->cpuinfo.transition_latency = (500 * 1000) + regulator_latency; + + ret = cpufreq_frequency_table_cpuinfo(policy, s3c64xx_freq_table); + if (ret != 0) { + pr_err("cpufreq: Failed to configure frequency table: %d\n", + ret); + regulator_put(vddarm); + clk_put(armclk); + } + + return ret; +} + +static struct cpufreq_driver s3c64xx_cpufreq_driver = { + .owner = THIS_MODULE, + .flags = 0, + .verify = s3c64xx_cpufreq_verify_speed, + .target = s3c64xx_cpufreq_set_target, + .get = s3c64xx_cpufreq_get_speed, + .init = s3c64xx_cpufreq_driver_init, + .name = "s3c", +}; + +static int __init s3c64xx_cpufreq_init(void) +{ + return cpufreq_register_driver(&s3c64xx_cpufreq_driver); +} +module_init(s3c64xx_cpufreq_init); -- cgit v0.10.2