From 6eb1c377423572374518f5be93214d139d113090 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 25 Mar 2013 11:20:23 +0530 Subject: cpufreq: powerpc/platforms/cell: move cpufreq driver to drivers/cpufreq This patch moves cpufreq driver of powerpc platforms/cell to drivers/cpufreq. Signed-off-by: Viresh Kumar Acked-by: Arnd Bergmann Signed-off-by: Rafael J. Wysocki diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig index 53aaefe..9978f59 100644 --- a/arch/powerpc/platforms/cell/Kconfig +++ b/arch/powerpc/platforms/cell/Kconfig @@ -113,34 +113,10 @@ config CBE_THERM default m depends on CBE_RAS && SPU_BASE -config CBE_CPUFREQ - tristate "CBE frequency scaling" - depends on CBE_RAS && CPU_FREQ - default m - help - This adds the cpufreq driver for Cell BE processors. - For details, take a look at . - If you don't have such processor, say N - -config CBE_CPUFREQ_PMI_ENABLE - bool "CBE frequency scaling using PMI interface" - depends on CBE_CPUFREQ - default n - help - Select this, if you want to use the PMI interface - to switch frequencies. Using PMI, the - processor will not only be able to run at lower speed, - but also at lower core voltage. - -config CBE_CPUFREQ_PMI - tristate - depends on CBE_CPUFREQ_PMI_ENABLE - default CBE_CPUFREQ - config PPC_PMI tristate default y - depends on CBE_CPUFREQ_PMI || PPC_IBM_CELL_POWERBUTTON + depends on CPU_FREQ_CBE_PMI || PPC_IBM_CELL_POWERBUTTON help PMI (Platform Management Interrupt) is a way to communicate with the BMC (Baseboard Management Controller). diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile index a4a8935..fe053e7 100644 --- a/arch/powerpc/platforms/cell/Makefile +++ b/arch/powerpc/platforms/cell/Makefile @@ -5,9 +5,6 @@ obj-$(CONFIG_PPC_CELL_NATIVE) += iommu.o setup.o spider-pic.o \ obj-$(CONFIG_CBE_RAS) += ras.o obj-$(CONFIG_CBE_THERM) += cbe_thermal.o -obj-$(CONFIG_CBE_CPUFREQ_PMI) += cbe_cpufreq_pmi.o -obj-$(CONFIG_CBE_CPUFREQ) += cbe-cpufreq.o -cbe-cpufreq-y += cbe_cpufreq_pervasive.o cbe_cpufreq.o obj-$(CONFIG_CBE_CPUFREQ_SPU_GOVERNOR) += cpufreq_spudemand.o obj-$(CONFIG_PPC_IBM_CELL_POWERBUTTON) += cbe_powerbutton.o diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq.c b/arch/powerpc/platforms/cell/cbe_cpufreq.c deleted file mode 100644 index 718c6a3..0000000 --- a/arch/powerpc/platforms/cell/cbe_cpufreq.c +++ /dev/null @@ -1,208 +0,0 @@ -/* - * cpufreq driver for the cell processor - * - * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007 - * - * Author: Christian Krafft - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include - -#include -#include -#include -#include "cbe_cpufreq.h" - -static DEFINE_MUTEX(cbe_switch_mutex); - - -/* the CBE supports an 8 step frequency scaling */ -static struct cpufreq_frequency_table cbe_freqs[] = { - {1, 0}, - {2, 0}, - {3, 0}, - {4, 0}, - {5, 0}, - {6, 0}, - {8, 0}, - {10, 0}, - {0, CPUFREQ_TABLE_END}, -}; - -/* - * hardware specific functions - */ - -static int set_pmode(unsigned int cpu, unsigned int slow_mode) -{ - int rc; - - if (cbe_cpufreq_has_pmi) - rc = cbe_cpufreq_set_pmode_pmi(cpu, slow_mode); - else - rc = cbe_cpufreq_set_pmode(cpu, slow_mode); - - pr_debug("register contains slow mode %d\n", cbe_cpufreq_get_pmode(cpu)); - - return rc; -} - -/* - * cpufreq functions - */ - -static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - const u32 *max_freqp; - u32 max_freq; - int i, cur_pmode; - struct device_node *cpu; - - cpu = of_get_cpu_node(policy->cpu, NULL); - - if (!cpu) - return -ENODEV; - - pr_debug("init cpufreq on CPU %d\n", policy->cpu); - - /* - * Let's check we can actually get to the CELL regs - */ - if (!cbe_get_cpu_pmd_regs(policy->cpu) || - !cbe_get_cpu_mic_tm_regs(policy->cpu)) { - pr_info("invalid CBE regs pointers for cpufreq\n"); - return -EINVAL; - } - - max_freqp = of_get_property(cpu, "clock-frequency", NULL); - - of_node_put(cpu); - - if (!max_freqp) - return -EINVAL; - - /* we need the freq in kHz */ - max_freq = *max_freqp / 1000; - - pr_debug("max clock-frequency is at %u kHz\n", max_freq); - pr_debug("initializing frequency table\n"); - - /* initialize frequency table */ - for (i=0; cbe_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) { - cbe_freqs[i].frequency = max_freq / cbe_freqs[i].index; - pr_debug("%d: %d\n", i, cbe_freqs[i].frequency); - } - - /* if DEBUG is enabled set_pmode() measures the latency - * of a transition */ - policy->cpuinfo.transition_latency = 25000; - - cur_pmode = cbe_cpufreq_get_pmode(policy->cpu); - pr_debug("current pmode is at %d\n",cur_pmode); - - policy->cur = cbe_freqs[cur_pmode].frequency; - -#ifdef CONFIG_SMP - cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu)); -#endif - - cpufreq_frequency_table_get_attr(cbe_freqs, policy->cpu); - - /* this ensures that policy->cpuinfo_min - * and policy->cpuinfo_max are set correctly */ - return cpufreq_frequency_table_cpuinfo(policy, cbe_freqs); -} - -static int cbe_cpufreq_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static int cbe_cpufreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, cbe_freqs); -} - -static int cbe_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - int rc; - struct cpufreq_freqs freqs; - unsigned int cbe_pmode_new; - - cpufreq_frequency_table_target(policy, - cbe_freqs, - target_freq, - relation, - &cbe_pmode_new); - - freqs.old = policy->cur; - freqs.new = cbe_freqs[cbe_pmode_new].frequency; - - mutex_lock(&cbe_switch_mutex); - cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); - - pr_debug("setting frequency for cpu %d to %d kHz, " \ - "1/%d of max frequency\n", - policy->cpu, - cbe_freqs[cbe_pmode_new].frequency, - cbe_freqs[cbe_pmode_new].index); - - rc = set_pmode(policy->cpu, cbe_pmode_new); - - cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); - mutex_unlock(&cbe_switch_mutex); - - return rc; -} - -static struct cpufreq_driver cbe_cpufreq_driver = { - .verify = cbe_cpufreq_verify, - .target = cbe_cpufreq_target, - .init = cbe_cpufreq_cpu_init, - .exit = cbe_cpufreq_cpu_exit, - .name = "cbe-cpufreq", - .owner = THIS_MODULE, - .flags = CPUFREQ_CONST_LOOPS, -}; - -/* - * module init and destoy - */ - -static int __init cbe_cpufreq_init(void) -{ - if (!machine_is(cell)) - return -ENODEV; - - return cpufreq_register_driver(&cbe_cpufreq_driver); -} - -static void __exit cbe_cpufreq_exit(void) -{ - cpufreq_unregister_driver(&cbe_cpufreq_driver); -} - -module_init(cbe_cpufreq_init); -module_exit(cbe_cpufreq_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Christian Krafft "); diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq.h b/arch/powerpc/platforms/cell/cbe_cpufreq.h deleted file mode 100644 index c1d86bf..0000000 --- a/arch/powerpc/platforms/cell/cbe_cpufreq.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * cbe_cpufreq.h - * - * This file contains the definitions used by the cbe_cpufreq driver. - * - * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007 - * - * Author: Christian Krafft - * - */ - -#include -#include - -int cbe_cpufreq_set_pmode(int cpu, unsigned int pmode); -int cbe_cpufreq_get_pmode(int cpu); - -int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode); - -#if defined(CONFIG_CBE_CPUFREQ_PMI) || defined(CONFIG_CBE_CPUFREQ_PMI_MODULE) -extern bool cbe_cpufreq_has_pmi; -#else -#define cbe_cpufreq_has_pmi (0) -#endif diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c b/arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c deleted file mode 100644 index 20472e4..0000000 --- a/arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * pervasive backend for the cbe_cpufreq driver - * - * This driver makes use of the pervasive unit to - * engage the desired frequency. - * - * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007 - * - * Author: Christian Krafft - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include -#include -#include - -#include "cbe_cpufreq.h" - -/* to write to MIC register */ -static u64 MIC_Slow_Fast_Timer_table[] = { - [0 ... 7] = 0x007fc00000000000ull, -}; - -/* more values for the MIC */ -static u64 MIC_Slow_Next_Timer_table[] = { - 0x0000240000000000ull, - 0x0000268000000000ull, - 0x000029C000000000ull, - 0x00002D0000000000ull, - 0x0000300000000000ull, - 0x0000334000000000ull, - 0x000039C000000000ull, - 0x00003FC000000000ull, -}; - - -int cbe_cpufreq_set_pmode(int cpu, unsigned int pmode) -{ - struct cbe_pmd_regs __iomem *pmd_regs; - struct cbe_mic_tm_regs __iomem *mic_tm_regs; - unsigned long flags; - u64 value; -#ifdef DEBUG - long time; -#endif - - local_irq_save(flags); - - mic_tm_regs = cbe_get_cpu_mic_tm_regs(cpu); - pmd_regs = cbe_get_cpu_pmd_regs(cpu); - -#ifdef DEBUG - time = jiffies; -#endif - - out_be64(&mic_tm_regs->slow_fast_timer_0, MIC_Slow_Fast_Timer_table[pmode]); - out_be64(&mic_tm_regs->slow_fast_timer_1, MIC_Slow_Fast_Timer_table[pmode]); - - out_be64(&mic_tm_regs->slow_next_timer_0, MIC_Slow_Next_Timer_table[pmode]); - out_be64(&mic_tm_regs->slow_next_timer_1, MIC_Slow_Next_Timer_table[pmode]); - - value = in_be64(&pmd_regs->pmcr); - /* set bits to zero */ - value &= 0xFFFFFFFFFFFFFFF8ull; - /* set bits to next pmode */ - value |= pmode; - - out_be64(&pmd_regs->pmcr, value); - -#ifdef DEBUG - /* wait until new pmode appears in status register */ - value = in_be64(&pmd_regs->pmsr) & 0x07; - while (value != pmode) { - cpu_relax(); - value = in_be64(&pmd_regs->pmsr) & 0x07; - } - - time = jiffies - time; - time = jiffies_to_msecs(time); - pr_debug("had to wait %lu ms for a transition using " \ - "pervasive unit\n", time); -#endif - local_irq_restore(flags); - - return 0; -} - - -int cbe_cpufreq_get_pmode(int cpu) -{ - int ret; - struct cbe_pmd_regs __iomem *pmd_regs; - - pmd_regs = cbe_get_cpu_pmd_regs(cpu); - ret = in_be64(&pmd_regs->pmsr) & 0x07; - - return ret; -} - diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c deleted file mode 100644 index 60a07a4..0000000 --- a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - * pmi backend for the cbe_cpufreq driver - * - * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007 - * - * Author: Christian Krafft - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#ifdef DEBUG -#include -#endif - -#include "cbe_cpufreq.h" - -static u8 pmi_slow_mode_limit[MAX_CBE]; - -bool cbe_cpufreq_has_pmi = false; -EXPORT_SYMBOL_GPL(cbe_cpufreq_has_pmi); - -/* - * hardware specific functions - */ - -int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode) -{ - int ret; - pmi_message_t pmi_msg; -#ifdef DEBUG - long time; -#endif - pmi_msg.type = PMI_TYPE_FREQ_CHANGE; - pmi_msg.data1 = cbe_cpu_to_node(cpu); - pmi_msg.data2 = pmode; - -#ifdef DEBUG - time = jiffies; -#endif - pmi_send_message(pmi_msg); - -#ifdef DEBUG - time = jiffies - time; - time = jiffies_to_msecs(time); - pr_debug("had to wait %lu ms for a transition using " \ - "PMI\n", time); -#endif - ret = pmi_msg.data2; - pr_debug("PMI returned slow mode %d\n", ret); - - return ret; -} -EXPORT_SYMBOL_GPL(cbe_cpufreq_set_pmode_pmi); - - -static void cbe_cpufreq_handle_pmi(pmi_message_t pmi_msg) -{ - u8 node, slow_mode; - - BUG_ON(pmi_msg.type != PMI_TYPE_FREQ_CHANGE); - - node = pmi_msg.data1; - slow_mode = pmi_msg.data2; - - pmi_slow_mode_limit[node] = slow_mode; - - pr_debug("cbe_handle_pmi: node: %d max_freq: %d\n", node, slow_mode); -} - -static int pmi_notifier(struct notifier_block *nb, - unsigned long event, void *data) -{ - struct cpufreq_policy *policy = data; - struct cpufreq_frequency_table *cbe_freqs; - u8 node; - - /* Should this really be called for CPUFREQ_ADJUST, CPUFREQ_INCOMPATIBLE - * and CPUFREQ_NOTIFY policy events?) - */ - if (event == CPUFREQ_START) - return 0; - - cbe_freqs = cpufreq_frequency_get_table(policy->cpu); - node = cbe_cpu_to_node(policy->cpu); - - pr_debug("got notified, event=%lu, node=%u\n", event, node); - - if (pmi_slow_mode_limit[node] != 0) { - pr_debug("limiting node %d to slow mode %d\n", - node, pmi_slow_mode_limit[node]); - - cpufreq_verify_within_limits(policy, 0, - - cbe_freqs[pmi_slow_mode_limit[node]].frequency); - } - - return 0; -} - -static struct notifier_block pmi_notifier_block = { - .notifier_call = pmi_notifier, -}; - -static struct pmi_handler cbe_pmi_handler = { - .type = PMI_TYPE_FREQ_CHANGE, - .handle_pmi_message = cbe_cpufreq_handle_pmi, -}; - - - -static int __init cbe_cpufreq_pmi_init(void) -{ - cbe_cpufreq_has_pmi = pmi_register_handler(&cbe_pmi_handler) == 0; - - if (!cbe_cpufreq_has_pmi) - return -ENODEV; - - cpufreq_register_notifier(&pmi_notifier_block, CPUFREQ_POLICY_NOTIFIER); - - return 0; -} - -static void __exit cbe_cpufreq_pmi_exit(void) -{ - cpufreq_unregister_notifier(&pmi_notifier_block, CPUFREQ_POLICY_NOTIFIER); - pmi_unregister_handler(&cbe_pmi_handler); -} - -module_init(cbe_cpufreq_pmi_init); -module_exit(cbe_cpufreq_pmi_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Christian Krafft "); diff --git a/drivers/cpufreq/Kconfig.powerpc b/drivers/cpufreq/Kconfig.powerpc index e76992f..9c926ca 100644 --- a/drivers/cpufreq/Kconfig.powerpc +++ b/drivers/cpufreq/Kconfig.powerpc @@ -1,3 +1,21 @@ +config CPU_FREQ_CBE + tristate "CBE frequency scaling" + depends on CBE_RAS && PPC_CELL + default m + help + This adds the cpufreq driver for Cell BE processors. + For details, take a look at . + If you don't have such processor, say N + +config CPU_FREQ_CBE_PMI + bool "CBE frequency scaling using PMI interface" + depends on CPU_FREQ_CBE + default n + help + Select this, if you want to use the PMI interface to switch + frequencies. Using PMI, the processor will not only be able to run at + lower speed, but also at lower core voltage. + config CPU_FREQ_MAPLE bool "Support for Maple 970FX Evaluation Board" depends on PPC_MAPLE diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 3a9ff23..17417c7 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -73,6 +73,9 @@ obj-$(CONFIG_ARCH_TEGRA) += tegra-cpufreq.o ################################################################################## # PowerPC platform drivers +obj-$(CONFIG_CPU_FREQ_CBE) += ppc-cbe-cpufreq.o +ppc-cbe-cpufreq-y += ppc_cbe_cpufreq_pervasive.o ppc_cbe_cpufreq.o +obj-$(CONFIG_CPU_FREQ_CBE_PMI) += ppc_cbe_cpufreq_pmi.o obj-$(CONFIG_CPU_FREQ_MAPLE) += maple-cpufreq.o ################################################################################## diff --git a/drivers/cpufreq/ppc_cbe_cpufreq.c b/drivers/cpufreq/ppc_cbe_cpufreq.c new file mode 100644 index 0000000..e577a1d --- /dev/null +++ b/drivers/cpufreq/ppc_cbe_cpufreq.c @@ -0,0 +1,209 @@ +/* + * cpufreq driver for the cell processor + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007 + * + * Author: Christian Krafft + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include + +#include +#include +#include + +#include "ppc_cbe_cpufreq.h" + +static DEFINE_MUTEX(cbe_switch_mutex); + + +/* the CBE supports an 8 step frequency scaling */ +static struct cpufreq_frequency_table cbe_freqs[] = { + {1, 0}, + {2, 0}, + {3, 0}, + {4, 0}, + {5, 0}, + {6, 0}, + {8, 0}, + {10, 0}, + {0, CPUFREQ_TABLE_END}, +}; + +/* + * hardware specific functions + */ + +static int set_pmode(unsigned int cpu, unsigned int slow_mode) +{ + int rc; + + if (cbe_cpufreq_has_pmi) + rc = cbe_cpufreq_set_pmode_pmi(cpu, slow_mode); + else + rc = cbe_cpufreq_set_pmode(cpu, slow_mode); + + pr_debug("register contains slow mode %d\n", cbe_cpufreq_get_pmode(cpu)); + + return rc; +} + +/* + * cpufreq functions + */ + +static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + const u32 *max_freqp; + u32 max_freq; + int i, cur_pmode; + struct device_node *cpu; + + cpu = of_get_cpu_node(policy->cpu, NULL); + + if (!cpu) + return -ENODEV; + + pr_debug("init cpufreq on CPU %d\n", policy->cpu); + + /* + * Let's check we can actually get to the CELL regs + */ + if (!cbe_get_cpu_pmd_regs(policy->cpu) || + !cbe_get_cpu_mic_tm_regs(policy->cpu)) { + pr_info("invalid CBE regs pointers for cpufreq\n"); + return -EINVAL; + } + + max_freqp = of_get_property(cpu, "clock-frequency", NULL); + + of_node_put(cpu); + + if (!max_freqp) + return -EINVAL; + + /* we need the freq in kHz */ + max_freq = *max_freqp / 1000; + + pr_debug("max clock-frequency is at %u kHz\n", max_freq); + pr_debug("initializing frequency table\n"); + + /* initialize frequency table */ + for (i=0; cbe_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) { + cbe_freqs[i].frequency = max_freq / cbe_freqs[i].index; + pr_debug("%d: %d\n", i, cbe_freqs[i].frequency); + } + + /* if DEBUG is enabled set_pmode() measures the latency + * of a transition */ + policy->cpuinfo.transition_latency = 25000; + + cur_pmode = cbe_cpufreq_get_pmode(policy->cpu); + pr_debug("current pmode is at %d\n",cur_pmode); + + policy->cur = cbe_freqs[cur_pmode].frequency; + +#ifdef CONFIG_SMP + cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu)); +#endif + + cpufreq_frequency_table_get_attr(cbe_freqs, policy->cpu); + + /* this ensures that policy->cpuinfo_min + * and policy->cpuinfo_max are set correctly */ + return cpufreq_frequency_table_cpuinfo(policy, cbe_freqs); +} + +static int cbe_cpufreq_cpu_exit(struct cpufreq_policy *policy) +{ + cpufreq_frequency_table_put_attr(policy->cpu); + return 0; +} + +static int cbe_cpufreq_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, cbe_freqs); +} + +static int cbe_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + int rc; + struct cpufreq_freqs freqs; + unsigned int cbe_pmode_new; + + cpufreq_frequency_table_target(policy, + cbe_freqs, + target_freq, + relation, + &cbe_pmode_new); + + freqs.old = policy->cur; + freqs.new = cbe_freqs[cbe_pmode_new].frequency; + + mutex_lock(&cbe_switch_mutex); + cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); + + pr_debug("setting frequency for cpu %d to %d kHz, " \ + "1/%d of max frequency\n", + policy->cpu, + cbe_freqs[cbe_pmode_new].frequency, + cbe_freqs[cbe_pmode_new].index); + + rc = set_pmode(policy->cpu, cbe_pmode_new); + + cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); + mutex_unlock(&cbe_switch_mutex); + + return rc; +} + +static struct cpufreq_driver cbe_cpufreq_driver = { + .verify = cbe_cpufreq_verify, + .target = cbe_cpufreq_target, + .init = cbe_cpufreq_cpu_init, + .exit = cbe_cpufreq_cpu_exit, + .name = "cbe-cpufreq", + .owner = THIS_MODULE, + .flags = CPUFREQ_CONST_LOOPS, +}; + +/* + * module init and destoy + */ + +static int __init cbe_cpufreq_init(void) +{ + if (!machine_is(cell)) + return -ENODEV; + + return cpufreq_register_driver(&cbe_cpufreq_driver); +} + +static void __exit cbe_cpufreq_exit(void) +{ + cpufreq_unregister_driver(&cbe_cpufreq_driver); +} + +module_init(cbe_cpufreq_init); +module_exit(cbe_cpufreq_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Christian Krafft "); diff --git a/drivers/cpufreq/ppc_cbe_cpufreq.h b/drivers/cpufreq/ppc_cbe_cpufreq.h new file mode 100644 index 0000000..b4c00a5 --- /dev/null +++ b/drivers/cpufreq/ppc_cbe_cpufreq.h @@ -0,0 +1,24 @@ +/* + * ppc_cbe_cpufreq.h + * + * This file contains the definitions used by the cbe_cpufreq driver. + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007 + * + * Author: Christian Krafft + * + */ + +#include +#include + +int cbe_cpufreq_set_pmode(int cpu, unsigned int pmode); +int cbe_cpufreq_get_pmode(int cpu); + +int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode); + +#if defined(CONFIG_CPU_FREQ_CBE_PMI) || defined(CONFIG_CPU_FREQ_CBE_PMI_MODULE) +extern bool cbe_cpufreq_has_pmi; +#else +#define cbe_cpufreq_has_pmi (0) +#endif diff --git a/drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c b/drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c new file mode 100644 index 0000000..84d2f2c --- /dev/null +++ b/drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c @@ -0,0 +1,115 @@ +/* + * pervasive backend for the cbe_cpufreq driver + * + * This driver makes use of the pervasive unit to + * engage the desired frequency. + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007 + * + * Author: Christian Krafft + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include + +#include "ppc_cbe_cpufreq.h" + +/* to write to MIC register */ +static u64 MIC_Slow_Fast_Timer_table[] = { + [0 ... 7] = 0x007fc00000000000ull, +}; + +/* more values for the MIC */ +static u64 MIC_Slow_Next_Timer_table[] = { + 0x0000240000000000ull, + 0x0000268000000000ull, + 0x000029C000000000ull, + 0x00002D0000000000ull, + 0x0000300000000000ull, + 0x0000334000000000ull, + 0x000039C000000000ull, + 0x00003FC000000000ull, +}; + + +int cbe_cpufreq_set_pmode(int cpu, unsigned int pmode) +{ + struct cbe_pmd_regs __iomem *pmd_regs; + struct cbe_mic_tm_regs __iomem *mic_tm_regs; + unsigned long flags; + u64 value; +#ifdef DEBUG + long time; +#endif + + local_irq_save(flags); + + mic_tm_regs = cbe_get_cpu_mic_tm_regs(cpu); + pmd_regs = cbe_get_cpu_pmd_regs(cpu); + +#ifdef DEBUG + time = jiffies; +#endif + + out_be64(&mic_tm_regs->slow_fast_timer_0, MIC_Slow_Fast_Timer_table[pmode]); + out_be64(&mic_tm_regs->slow_fast_timer_1, MIC_Slow_Fast_Timer_table[pmode]); + + out_be64(&mic_tm_regs->slow_next_timer_0, MIC_Slow_Next_Timer_table[pmode]); + out_be64(&mic_tm_regs->slow_next_timer_1, MIC_Slow_Next_Timer_table[pmode]); + + value = in_be64(&pmd_regs->pmcr); + /* set bits to zero */ + value &= 0xFFFFFFFFFFFFFFF8ull; + /* set bits to next pmode */ + value |= pmode; + + out_be64(&pmd_regs->pmcr, value); + +#ifdef DEBUG + /* wait until new pmode appears in status register */ + value = in_be64(&pmd_regs->pmsr) & 0x07; + while (value != pmode) { + cpu_relax(); + value = in_be64(&pmd_regs->pmsr) & 0x07; + } + + time = jiffies - time; + time = jiffies_to_msecs(time); + pr_debug("had to wait %lu ms for a transition using " \ + "pervasive unit\n", time); +#endif + local_irq_restore(flags); + + return 0; +} + + +int cbe_cpufreq_get_pmode(int cpu) +{ + int ret; + struct cbe_pmd_regs __iomem *pmd_regs; + + pmd_regs = cbe_get_cpu_pmd_regs(cpu); + ret = in_be64(&pmd_regs->pmsr) & 0x07; + + return ret; +} + diff --git a/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c b/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c new file mode 100644 index 0000000..d29e8da --- /dev/null +++ b/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c @@ -0,0 +1,156 @@ +/* + * pmi backend for the cbe_cpufreq driver + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007 + * + * Author: Christian Krafft + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#ifdef DEBUG +#include +#endif + +#include "ppc_cbe_cpufreq.h" + +static u8 pmi_slow_mode_limit[MAX_CBE]; + +bool cbe_cpufreq_has_pmi = false; +EXPORT_SYMBOL_GPL(cbe_cpufreq_has_pmi); + +/* + * hardware specific functions + */ + +int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode) +{ + int ret; + pmi_message_t pmi_msg; +#ifdef DEBUG + long time; +#endif + pmi_msg.type = PMI_TYPE_FREQ_CHANGE; + pmi_msg.data1 = cbe_cpu_to_node(cpu); + pmi_msg.data2 = pmode; + +#ifdef DEBUG + time = jiffies; +#endif + pmi_send_message(pmi_msg); + +#ifdef DEBUG + time = jiffies - time; + time = jiffies_to_msecs(time); + pr_debug("had to wait %lu ms for a transition using " \ + "PMI\n", time); +#endif + ret = pmi_msg.data2; + pr_debug("PMI returned slow mode %d\n", ret); + + return ret; +} +EXPORT_SYMBOL_GPL(cbe_cpufreq_set_pmode_pmi); + + +static void cbe_cpufreq_handle_pmi(pmi_message_t pmi_msg) +{ + u8 node, slow_mode; + + BUG_ON(pmi_msg.type != PMI_TYPE_FREQ_CHANGE); + + node = pmi_msg.data1; + slow_mode = pmi_msg.data2; + + pmi_slow_mode_limit[node] = slow_mode; + + pr_debug("cbe_handle_pmi: node: %d max_freq: %d\n", node, slow_mode); +} + +static int pmi_notifier(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct cpufreq_policy *policy = data; + struct cpufreq_frequency_table *cbe_freqs; + u8 node; + + /* Should this really be called for CPUFREQ_ADJUST, CPUFREQ_INCOMPATIBLE + * and CPUFREQ_NOTIFY policy events?) + */ + if (event == CPUFREQ_START) + return 0; + + cbe_freqs = cpufreq_frequency_get_table(policy->cpu); + node = cbe_cpu_to_node(policy->cpu); + + pr_debug("got notified, event=%lu, node=%u\n", event, node); + + if (pmi_slow_mode_limit[node] != 0) { + pr_debug("limiting node %d to slow mode %d\n", + node, pmi_slow_mode_limit[node]); + + cpufreq_verify_within_limits(policy, 0, + + cbe_freqs[pmi_slow_mode_limit[node]].frequency); + } + + return 0; +} + +static struct notifier_block pmi_notifier_block = { + .notifier_call = pmi_notifier, +}; + +static struct pmi_handler cbe_pmi_handler = { + .type = PMI_TYPE_FREQ_CHANGE, + .handle_pmi_message = cbe_cpufreq_handle_pmi, +}; + + + +static int __init cbe_cpufreq_pmi_init(void) +{ + cbe_cpufreq_has_pmi = pmi_register_handler(&cbe_pmi_handler) == 0; + + if (!cbe_cpufreq_has_pmi) + return -ENODEV; + + cpufreq_register_notifier(&pmi_notifier_block, CPUFREQ_POLICY_NOTIFIER); + + return 0; +} + +static void __exit cbe_cpufreq_pmi_exit(void) +{ + cpufreq_unregister_notifier(&pmi_notifier_block, CPUFREQ_POLICY_NOTIFIER); + pmi_unregister_handler(&cbe_pmi_handler); +} + +module_init(cbe_cpufreq_pmi_init); +module_exit(cbe_cpufreq_pmi_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Christian Krafft "); -- cgit v0.10.2