From 9fdb27d48a3a1abae4c3554b82dce9f0aafc377a Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Mon, 10 Jun 2013 18:22:19 +0900 Subject: gpio: samsung: Remove OF support for s3c24xx There is no users of this code and there is already a pinctrl driver written for s3c24xx which is going to be used on any s3c24xx DT platforms. Hence this has been effectively a dead code in mainline. This reverts commit 172c6a13653ac8cd6a231293b87c93821e90c1d6 gpio: samsung: add devicetree init for s3c24xx arches Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Acked-by: Heiko Stuebner Acked-by: Linus Walleij Signed-off-by: Kukjin Kim diff --git a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt index f1e5dfe..5375625 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt @@ -39,46 +39,3 @@ Example: #gpio-cells = <4>; gpio-controller; }; - - -Samsung S3C24XX GPIO Controller - -Required properties: -- compatible: Compatible property value should be "samsung,s3c24xx-gpio". - -- reg: Physical base address of the controller and length of memory mapped - region. - -- #gpio-cells: Should be 3. The syntax of the gpio specifier used by client nodes - should be the following with values derived from the SoC user manual. - <[phandle of the gpio controller node] - [pin number within the gpio controller] - [mux function] - [flags and pull up/down] - - Values for gpio specifier: - - Pin number: depending on the controller a number from 0 up to 15. - - Mux function: Depending on the SoC and the gpio bank the gpio can be set - as input, output or a special function - - Flags and Pull Up/Down: the values to use differ for the individual SoCs - example S3C2416/S3C2450: - 0 - Pull Up/Down Disabled. - 1 - Pull Down Enabled. - 2 - Pull Up Enabled. - Bit 16 (0x00010000) - Input is active low. - Consult the user manual for the correct values of Mux and Pull Up/Down. - -- gpio-controller: Specifies that the node is a gpio controller. -- #address-cells: should be 1. -- #size-cells: should be 1. - -Example: - - gpa: gpio-controller@56000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "samsung,s3c24xx-gpio"; - reg = <0x56000000 0x10>; - #gpio-cells = <3>; - gpio-controller; - }; diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index b22ca79..96f6a7c 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -933,67 +933,6 @@ static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip) s3c_gpiolib_track(chip); } -#if defined(CONFIG_PLAT_S3C24XX) && defined(CONFIG_OF) -static int s3c24xx_gpio_xlate(struct gpio_chip *gc, - const struct of_phandle_args *gpiospec, u32 *flags) -{ - unsigned int pin; - - if (WARN_ON(gc->of_gpio_n_cells < 3)) - return -EINVAL; - - if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells)) - return -EINVAL; - - if (gpiospec->args[0] > gc->ngpio) - return -EINVAL; - - pin = gc->base + gpiospec->args[0]; - - if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(gpiospec->args[1]))) - pr_warn("gpio_xlate: failed to set pin function\n"); - if (s3c_gpio_setpull(pin, gpiospec->args[2] & 0xffff)) - pr_warn("gpio_xlate: failed to set pin pull up/down\n"); - - if (flags) - *flags = gpiospec->args[2] >> 16; - - return gpiospec->args[0]; -} - -static const struct of_device_id s3c24xx_gpio_dt_match[] __initdata = { - { .compatible = "samsung,s3c24xx-gpio", }, - {} -}; - -static __init void s3c24xx_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip, - u64 base, u64 offset) -{ - struct gpio_chip *gc = &chip->chip; - u64 address; - - if (!of_have_populated_dt()) - return; - - address = chip->base ? base + ((u32)chip->base & 0xfff) : base + offset; - gc->of_node = of_find_matching_node_by_address(NULL, - s3c24xx_gpio_dt_match, address); - if (!gc->of_node) { - pr_info("gpio: device tree node not found for gpio controller" - " with base address %08llx\n", address); - return; - } - gc->of_gpio_n_cells = 3; - gc->of_xlate = s3c24xx_gpio_xlate; -} -#else -static __init void s3c24xx_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip, - u64 base, u64 offset) -{ - return; -} -#endif /* defined(CONFIG_PLAT_S3C24XX) && defined(CONFIG_OF) */ - static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip, int nr_chips, void __iomem *base) { @@ -1018,8 +957,6 @@ static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip, gc->direction_output = samsung_gpiolib_2bit_output; samsung_gpiolib_add(chip); - - s3c24xx_gpiolib_attach_ofnode(chip, S3C24XX_PA_GPIO, i * 0x10); } } -- cgit v0.10.2