From 4459146deb9eeabb0adf10d829bd8019d16bb0f4 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Sun, 13 Jan 2013 17:08:01 +1000 Subject: drm/nouveau/devinit: ensure legacy vga control is enabled during post Fixes ACPI backlight control after suspend on some systems. Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/init.c b/drivers/gpu/drm/nouveau/core/subdev/bios/init.c index 2917d55..690ed43 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/bios/init.c +++ b/drivers/gpu/drm/nouveau/core/subdev/bios/init.c @@ -1534,7 +1534,6 @@ init_io(struct nvbios_init *init) mdelay(10); init_wr32(init, 0x614100, 0x10000018); init_wr32(init, 0x614900, 0x10000018); - return; } value = init_rdport(init, port) & mask; -- cgit v0.10.2 From 1a1841d300a1b6cac35b0761755364d6d3e10b2e Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 10 Dec 2012 18:53:43 +1000 Subject: drm/nouveau: do not forcibly power on lvds panels This fix was put in place to fix a bug where the eDP panel on certain laptops fails to respond over the aux channel after suspend. It appears that on some systems (Dell M6600, with LVDS panel) there's a very bad interaction with the eDP init table that causes the SOR to get very confused and not drive the panel correctly, leading to bleed. A DPMS off/on cycle is enough to bring it back, but, this will avoid the problem by not touching the panel GPIOs at times we're not meant to. Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index ac340ba..e620ba8 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -127,12 +127,26 @@ nouveau_connector_ddc_detect(struct drm_connector *connector, struct nouveau_encoder **pnv_encoder) { struct drm_device *dev = connector->dev; + struct nouveau_connector *nv_connector = nouveau_connector(connector); struct nouveau_drm *drm = nouveau_drm(dev); + struct nouveau_gpio *gpio = nouveau_gpio(drm->device); struct nouveau_i2c *i2c = nouveau_i2c(drm->device); - int i; + struct nouveau_i2c_port *port = NULL; + int i, panel = -ENODEV; + + /* eDP panels need powering on by us (if the VBIOS doesn't default it + * to on) before doing any AUX channel transactions. LVDS panel power + * is handled by the SOR itself, and not required for LVDS DDC. + */ + if (nv_connector->type == DCB_CONNECTOR_eDP) { + panel = gpio->get(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff); + if (panel == 0) { + gpio->set(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff, 1); + msleep(300); + } + } for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) { - struct nouveau_i2c_port *port = NULL; struct nouveau_encoder *nv_encoder; struct drm_mode_object *obj; int id; @@ -150,11 +164,19 @@ nouveau_connector_ddc_detect(struct drm_connector *connector, port = i2c->find(i2c, nv_encoder->dcb->i2c_index); if (port && nv_probe_i2c(port, 0x50)) { *pnv_encoder = nv_encoder; - return port; + break; } + + port = NULL; } - return NULL; + /* eDP panel not detected, restore panel power GPIO to previous + * state to avoid confusing the SOR for other output types. + */ + if (!port && panel == 0) + gpio->set(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff, panel); + + return port; } static struct nouveau_encoder * diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index e4188f2..508b00a 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -225,15 +225,6 @@ nouveau_display_init(struct drm_device *dev) if (ret) return ret; - /* power on internal panel if it's not already. the init tables of - * some vbios default this to off for some reason, causing the - * panel to not work after resume - */ - if (gpio && gpio->get(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff) == 0) { - gpio->set(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff, 1); - msleep(300); - } - /* enable polling for external displays */ drm_kms_helper_poll_enable(dev); -- cgit v0.10.2 From 4c4101d29fb6c63f78791d02c437702b11e1d4f0 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Sun, 2 Dec 2012 12:56:22 +0100 Subject: drm/nouveau: add locking around instobj list operations Fixes memory corruptions, oopses, etc. when multiple gpuobjs are simultaneously created or destroyed. Signed-off-by: Marcin Slusarz Signed-off-by: Ben Skeggs Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/nouveau/core/subdev/instmem/base.c b/drivers/gpu/drm/nouveau/core/subdev/instmem/base.c index 1188227..6565f3d 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/instmem/base.c +++ b/drivers/gpu/drm/nouveau/core/subdev/instmem/base.c @@ -40,15 +40,21 @@ nouveau_instobj_create_(struct nouveau_object *parent, if (ret) return ret; + mutex_lock(&imem->base.mutex); list_add(&iobj->head, &imem->list); + mutex_unlock(&imem->base.mutex); return 0; } void nouveau_instobj_destroy(struct nouveau_instobj *iobj) { - if (iobj->head.prev) - list_del(&iobj->head); + struct nouveau_subdev *subdev = nv_subdev(iobj->base.engine); + + mutex_lock(&subdev->mutex); + list_del(&iobj->head); + mutex_unlock(&subdev->mutex); + return nouveau_object_destroy(&iobj->base); } @@ -88,6 +94,8 @@ nouveau_instmem_init(struct nouveau_instmem *imem) if (ret) return ret; + mutex_lock(&imem->base.mutex); + list_for_each_entry(iobj, &imem->list, head) { if (iobj->suspend) { for (i = 0; i < iobj->size; i += 4) @@ -97,6 +105,8 @@ nouveau_instmem_init(struct nouveau_instmem *imem) } } + mutex_unlock(&imem->base.mutex); + return 0; } @@ -104,17 +114,26 @@ int nouveau_instmem_fini(struct nouveau_instmem *imem, bool suspend) { struct nouveau_instobj *iobj; - int i; + int i, ret = 0; if (suspend) { + mutex_lock(&imem->base.mutex); + list_for_each_entry(iobj, &imem->list, head) { iobj->suspend = vmalloc(iobj->size); - if (iobj->suspend) { - for (i = 0; i < iobj->size; i += 4) - iobj->suspend[i / 4] = nv_ro32(iobj, i); - } else - return -ENOMEM; + if (!iobj->suspend) { + ret = -ENOMEM; + break; + } + + for (i = 0; i < iobj->size; i += 4) + iobj->suspend[i / 4] = nv_ro32(iobj, i); } + + mutex_unlock(&imem->base.mutex); + + if (ret) + return ret; } return nouveau_subdev_fini(&imem->base, suspend); -- cgit v0.10.2 From cfd376b6bfccf33782a0748a9c70f7f752f8b869 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Mon, 10 Dec 2012 21:30:51 +0100 Subject: drm/nouveau/vm: fix memory corruption when pgt allocation fails If we return freed vm, nouveau_drm_open will happily call nouveau_cli_destroy, which will try to free it again. Reported-by: Peter Hurley Signed-off-by: Marcin Slusarz Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/subdev/vm/base.c b/drivers/gpu/drm/nouveau/core/subdev/vm/base.c index 082c11b..77c67fc 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/vm/base.c +++ b/drivers/gpu/drm/nouveau/core/subdev/vm/base.c @@ -352,7 +352,7 @@ nouveau_vm_create(struct nouveau_vmmgr *vmm, u64 offset, u64 length, u64 mm_length = (offset + length) - mm_offset; int ret; - vm = *pvm = kzalloc(sizeof(*vm), GFP_KERNEL); + vm = kzalloc(sizeof(*vm), GFP_KERNEL); if (!vm) return -ENOMEM; @@ -376,6 +376,8 @@ nouveau_vm_create(struct nouveau_vmmgr *vmm, u64 offset, u64 length, return ret; } + *pvm = vm; + return 0; } -- cgit v0.10.2 From 82c805abb20946dcb343cd607327e4d720bf6b28 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Mon, 10 Dec 2012 21:57:20 +0100 Subject: drm/nouveau: don't return freed object from nouveau_handle_create Signed-off-by: Marcin Slusarz Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/core/handle.c b/drivers/gpu/drm/nouveau/core/core/handle.c index b8d2cbf..264c2b3 100644 --- a/drivers/gpu/drm/nouveau/core/core/handle.c +++ b/drivers/gpu/drm/nouveau/core/core/handle.c @@ -109,7 +109,7 @@ nouveau_handle_create(struct nouveau_object *parent, u32 _parent, u32 _handle, while (!nv_iclass(namedb, NV_NAMEDB_CLASS)) namedb = namedb->parent; - handle = *phandle = kzalloc(sizeof(*handle), GFP_KERNEL); + handle = kzalloc(sizeof(*handle), GFP_KERNEL); if (!handle) return -ENOMEM; @@ -146,6 +146,9 @@ nouveau_handle_create(struct nouveau_object *parent, u32 _parent, u32 _handle, } hprintk(handle, TRACE, "created\n"); + + *phandle = handle; + return 0; } -- cgit v0.10.2 From dd5700ea98ad0b375a72525ce7d7edddf15b2693 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Mon, 10 Dec 2012 21:59:52 +0100 Subject: drm/nouveau: fix nouveau_client allocation failure path Depending on the point of failure, freed object would be returned or memory leak would happen. Signed-off-by: Marcin Slusarz Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/core/client.c b/drivers/gpu/drm/nouveau/core/core/client.c index c617f04..8bbb58f 100644 --- a/drivers/gpu/drm/nouveau/core/core/client.c +++ b/drivers/gpu/drm/nouveau/core/core/client.c @@ -66,10 +66,8 @@ nouveau_client_create_(const char *name, u64 devname, const char *cfg, ret = nouveau_handle_create(nv_object(client), ~0, ~0, nv_object(client), &client->root); - if (ret) { - nouveau_namedb_destroy(&client->base); + if (ret) return ret; - } /* prevent init/fini being called, os in in charge of this */ atomic_set(&nv_object(client)->usecount, 2); diff --git a/drivers/gpu/drm/nouveau/core/include/core/client.h b/drivers/gpu/drm/nouveau/core/include/core/client.h index 0193532..63acc03 100644 --- a/drivers/gpu/drm/nouveau/core/include/core/client.h +++ b/drivers/gpu/drm/nouveau/core/include/core/client.h @@ -36,6 +36,9 @@ nouveau_client(void *obj) int nouveau_client_create_(const char *name, u64 device, const char *cfg, const char *dbg, int, void **); +#define nouveau_client_destroy(p) \ + nouveau_namedb_destroy(&(p)->base) + int nouveau_client_init(struct nouveau_client *); int nouveau_client_fini(struct nouveau_client *, bool suspend); diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c index 01c403d..efcfefa 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.c +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c @@ -84,11 +84,16 @@ nouveau_cli_create(struct pci_dev *pdev, const char *name, struct nouveau_cli *cli; int ret; + *pcli = NULL; ret = nouveau_client_create_(name, nouveau_name(pdev), nouveau_config, nouveau_debug, size, pcli); cli = *pcli; - if (ret) + if (ret) { + if (cli) + nouveau_client_destroy(&cli->base); + *pcli = NULL; return ret; + } mutex_init(&cli->mutex); return 0; -- cgit v0.10.2 From 92441b2263866c27ef48137be5aa6c8c692652fc Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Tue, 18 Dec 2012 20:30:47 +0100 Subject: drm/nouveau: fix blank LVDS screen regression on pre-nv50 cards Commit 2a44e499 ("drm/nouveau/disp: introduce proper init/fini, separate from create/destroy") started to call display init routines on pre-nv50 hardware on module load. But LVDS init code sets driver state in a way which prevents modesetting code from operating properly. nv04_display_init calls nv04_dfp_restore, which sets encoder->last_dpms to NV_DPMS_CLEARED. drm_crtc_helper_set_mode nv04_dfp_prepare nv04_lvds_dpms(DRM_MODE_DPMS_OFF) nv04_lvds_dpms checks last_dpms mode (which is NV_DPMS_CLEARED) and wrongly assumes it's a "powersaving mode", the new one (DRM_MODE_DPMS_OFF) is too, so it skips calling some crucial lvds scripts. Reported-by: Chris Paulson-Ellis Signed-off-by: Marcin Slusarz Signed-off-by: Ben Skeggs Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/nouveau/nv04_dfp.c b/drivers/gpu/drm/nouveau/nv04_dfp.c index 184cdf8..39ffc07 100644 --- a/drivers/gpu/drm/nouveau/nv04_dfp.c +++ b/drivers/gpu/drm/nouveau/nv04_dfp.c @@ -505,7 +505,7 @@ static void nv04_dfp_update_backlight(struct drm_encoder *encoder, int mode) static inline bool is_powersaving_dpms(int mode) { - return (mode != DRM_MODE_DPMS_ON); + return mode != DRM_MODE_DPMS_ON && mode != NV_DPMS_CLEARED; } static void nv04_lvds_dpms(struct drm_encoder *encoder, int mode) -- cgit v0.10.2 From f20ebd034eab43fd38c58b11c5bb5fb125e5f7d7 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Tue, 25 Dec 2012 18:13:22 +0100 Subject: drm/nv17-50: restore fence buffer on resume Since commit 5e120f6e4b3f35b741c5445dfc755f50128c3c44 "drm/nouveau/fence: convert to exec engine, and improve channel sync" nouveau fence sync implementation for nv17-50 and nvc0+ started to rely on state of fence buffer left by previous sync operation. But as pinned bo's (where fence state is stored) are not saved+restored across suspend/resume, we need to do it manually. nvc0+ was fixed by commit d6ba6d215a538a58f0f0026f0961b0b9125e8042 "drm/nvc0/fence: restore pre-suspend fence buffer context on resume". Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=50121 Signed-off-by: Marcin Slusarz Signed-off-by: Ben Skeggs Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/nouveau/nouveau_fence.h b/drivers/gpu/drm/nouveau/nouveau_fence.h index bedafd1..cdb83ac 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fence.h +++ b/drivers/gpu/drm/nouveau/nouveau_fence.h @@ -60,6 +60,7 @@ u32 nv10_fence_read(struct nouveau_channel *); void nv10_fence_context_del(struct nouveau_channel *); void nv10_fence_destroy(struct nouveau_drm *); int nv10_fence_create(struct nouveau_drm *); +void nv17_fence_resume(struct nouveau_drm *drm); int nv50_fence_create(struct nouveau_drm *); int nv84_fence_create(struct nouveau_drm *); diff --git a/drivers/gpu/drm/nouveau/nv10_fence.c b/drivers/gpu/drm/nouveau/nv10_fence.c index 7ae7f97..03017f2 100644 --- a/drivers/gpu/drm/nouveau/nv10_fence.c +++ b/drivers/gpu/drm/nouveau/nv10_fence.c @@ -162,6 +162,13 @@ nv10_fence_destroy(struct nouveau_drm *drm) kfree(priv); } +void nv17_fence_resume(struct nouveau_drm *drm) +{ + struct nv10_fence_priv *priv = drm->fence; + + nouveau_bo_wr32(priv->bo, 0, priv->sequence); +} + int nv10_fence_create(struct nouveau_drm *drm) { @@ -197,6 +204,7 @@ nv10_fence_create(struct nouveau_drm *drm) if (ret == 0) { nouveau_bo_wr32(priv->bo, 0x000, 0x00000000); priv->base.sync = nv17_fence_sync; + priv->base.resume = nv17_fence_resume; } } diff --git a/drivers/gpu/drm/nouveau/nv50_fence.c b/drivers/gpu/drm/nouveau/nv50_fence.c index c20f272..d889f3a 100644 --- a/drivers/gpu/drm/nouveau/nv50_fence.c +++ b/drivers/gpu/drm/nouveau/nv50_fence.c @@ -122,6 +122,7 @@ nv50_fence_create(struct nouveau_drm *drm) if (ret == 0) { nouveau_bo_wr32(priv->bo, 0x000, 0x00000000); priv->base.sync = nv17_fence_sync; + priv->base.resume = nv17_fence_resume; } if (ret) -- cgit v0.10.2 From c684cef795cb5356ae7f6a7ad613946eef14265f Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Thu, 3 Jan 2013 19:38:45 +0100 Subject: drm/nv50/disp: fix selection of bios script for analog outputs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Analog output number was overwritten by value from digital output path. Fix it. Fixes resume from s2ram: https://bugs.freedesktop.org/show_bug.cgi?id=58729 (as stumbled on by J Binder, Pontus Fuchs and me) Fixes blank screen on module load (reported by Sune Mølgaard). Fixes regression from commit 186ecad21c854385823a430b1402053ae7fd59dc ("drm/nv50/disp: move remaining interrupt handling into core"). Reported-by: J Binder Reported-by: Pontus Fuchs Reported-by: Sune Mølgaard Signed-off-by: Marcin Slusarz Tested-by: Marcin Slusarz Tested-by: Sune Mølgaard Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c b/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c index 0f09af1..ca1a7d7 100644 --- a/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c +++ b/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c @@ -851,20 +851,23 @@ exec_script(struct nv50_disp_priv *priv, int head, int id) for (i = 0; !(ctrl & (1 << head)) && i < 3; i++) ctrl = nv_rd32(priv, 0x610b5c + (i * 8)); - if (nv_device(priv)->chipset < 0x90 || - nv_device(priv)->chipset == 0x92 || - nv_device(priv)->chipset == 0xa0) { - for (i = 0; !(ctrl & (1 << head)) && i < 2; i++) - ctrl = nv_rd32(priv, 0x610b74 + (i * 8)); - i += 3; - } else { - for (i = 0; !(ctrl & (1 << head)) && i < 4; i++) - ctrl = nv_rd32(priv, 0x610798 + (i * 8)); - i += 3; + if (!(ctrl & (1 << head))) { + if (nv_device(priv)->chipset < 0x90 || + nv_device(priv)->chipset == 0x92 || + nv_device(priv)->chipset == 0xa0) { + for (i = 0; !(ctrl & (1 << head)) && i < 2; i++) + ctrl = nv_rd32(priv, 0x610b74 + (i * 8)); + i += 4; + } else { + for (i = 0; !(ctrl & (1 << head)) && i < 4; i++) + ctrl = nv_rd32(priv, 0x610798 + (i * 8)); + i += 4; + } } if (!(ctrl & (1 << head))) return false; + i--; data = exec_lookup(priv, head, i, ctrl, &dcb, &ver, &hdr, &cnt, &len, &info); if (data) { @@ -898,20 +901,23 @@ exec_clkcmp(struct nv50_disp_priv *priv, int head, int id, u32 pclk, for (i = 0; !(ctrl & (1 << head)) && i < 3; i++) ctrl = nv_rd32(priv, 0x610b58 + (i * 8)); - if (nv_device(priv)->chipset < 0x90 || - nv_device(priv)->chipset == 0x92 || - nv_device(priv)->chipset == 0xa0) { - for (i = 0; !(ctrl & (1 << head)) && i < 2; i++) - ctrl = nv_rd32(priv, 0x610b70 + (i * 8)); - i += 3; - } else { - for (i = 0; !(ctrl & (1 << head)) && i < 4; i++) - ctrl = nv_rd32(priv, 0x610794 + (i * 8)); - i += 3; + if (!(ctrl & (1 << head))) { + if (nv_device(priv)->chipset < 0x90 || + nv_device(priv)->chipset == 0x92 || + nv_device(priv)->chipset == 0xa0) { + for (i = 0; !(ctrl & (1 << head)) && i < 2; i++) + ctrl = nv_rd32(priv, 0x610b70 + (i * 8)); + i += 4; + } else { + for (i = 0; !(ctrl & (1 << head)) && i < 4; i++) + ctrl = nv_rd32(priv, 0x610794 + (i * 8)); + i += 4; + } } if (!(ctrl & (1 << head))) return 0x0000; + i--; data = exec_lookup(priv, head, i, ctrl, outp, &ver, &hdr, &cnt, &len, &info1); if (!data) -- cgit v0.10.2 From d19528a9e4f220519c2cb3f56ef0c84ead3ee440 Mon Sep 17 00:00:00 2001 From: Aleksi Torhamo Date: Fri, 4 Jan 2013 18:39:13 +0200 Subject: drm/nouveau/clock: fix support for more than 2 monitors on nve0 Fixes regression introduced in commit 70790f4f "drm/nouveau/clock: pull in the implementation from all over the place" When code was moved from nv50_crtc_set_clock to nvc0_clock_pll_set, the PLLs it is used for got limited to only the first two VPLLs. nv50_crtc_set_clock was only called to change VPLLs, so it didn't limit what it was used for in any way. Since nvc0_clock_pll_set is used for all PLLs, it has to specify which PLLs the code is used for, and only listed the first two VPLLs. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=58735 This patch is a -stable candidate for 3.7. Signed-off-by: Aleksi Torhamo Tested-by: Aleksi Torhamo Tested-by: Sean Santos Signed-off-by: Ben Skeggs Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/nouveau/core/include/subdev/bios/pll.h b/drivers/gpu/drm/nouveau/core/include/subdev/bios/pll.h index c345097..b2f3d4d 100644 --- a/drivers/gpu/drm/nouveau/core/include/subdev/bios/pll.h +++ b/drivers/gpu/drm/nouveau/core/include/subdev/bios/pll.h @@ -38,6 +38,8 @@ enum nvbios_pll_type { PLL_UNK42 = 0x42, PLL_VPLL0 = 0x80, PLL_VPLL1 = 0x81, + PLL_VPLL2 = 0x82, + PLL_VPLL3 = 0x83, PLL_MAX = 0xff }; diff --git a/drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c b/drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c index f6962c9..7c96262 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c +++ b/drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c @@ -52,6 +52,8 @@ nvc0_clock_pll_set(struct nouveau_clock *clk, u32 type, u32 freq) switch (info.type) { case PLL_VPLL0: case PLL_VPLL1: + case PLL_VPLL2: + case PLL_VPLL3: nv_mask(priv, info.reg + 0x0c, 0x00000000, 0x00000100); nv_wr32(priv, info.reg + 0x04, (P << 16) | (N << 8) | M); nv_wr32(priv, info.reg + 0x10, fN << 16); -- cgit v0.10.2 From 43f789792e2c7ea2bff37195e4c4b4239e9e02b7 Mon Sep 17 00:00:00 2001 From: Aleksi Torhamo Date: Wed, 9 Jan 2013 20:08:48 +0200 Subject: drm/nvc0/fb: fix crash when different mutex is used to protect same list Fixes regression introduced in commit 861d2107 "drm/nouveau/fb: merge fb/vram and port to subdev interfaces" nv50_fb_vram_{new,del} functions were changed to use nouveau_subdev->mutex instead of the old nouveau_mm->mutex. nvc0_fb_vram_new still uses the nouveau_mm->mutex, but nvc0 doesn't have its own fb_vram_del function, using nv50_fb_vram_del instead. Because of this, on nvc0 a different mutex ends up being used to protect additions and deletions to the same list. This patch is a -stable candidate for 3.7. Signed-off-by: Aleksi Torhamo Reported-by: Roy Spliet Tested-by: Roy Spliet Signed-off-by: Ben Skeggs Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/nouveau/core/subdev/fb/nvc0.c b/drivers/gpu/drm/nouveau/core/subdev/fb/nvc0.c index 306bdf1..7606ed1 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/fb/nvc0.c +++ b/drivers/gpu/drm/nouveau/core/subdev/fb/nvc0.c @@ -145,14 +145,14 @@ nvc0_fb_vram_new(struct nouveau_fb *pfb, u64 size, u32 align, u32 ncmin, mem->memtype = type; mem->size = size; - mutex_lock(&mm->mutex); + mutex_lock(&pfb->base.mutex); do { if (back) ret = nouveau_mm_tail(mm, 1, size, ncmin, align, &r); else ret = nouveau_mm_head(mm, 1, size, ncmin, align, &r); if (ret) { - mutex_unlock(&mm->mutex); + mutex_unlock(&pfb->base.mutex); pfb->ram.put(pfb, &mem); return ret; } @@ -160,7 +160,7 @@ nvc0_fb_vram_new(struct nouveau_fb *pfb, u64 size, u32 align, u32 ncmin, list_add_tail(&r->rl_entry, &mem->regions); size -= r->length; } while (size); - mutex_unlock(&mm->mutex); + mutex_unlock(&pfb->base.mutex); r = list_first_entry(&mem->regions, struct nouveau_mm_node, rl_entry); mem->offset = (u64)r->offset << 12; -- cgit v0.10.2