From 28ff2f7a742daba86ccd7021be7b27a4673b2797 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 25 Jul 2011 21:46:09 +0200 Subject: hwmon: (sch5627) Factor out some code shared with sch5636 driver This patch adds a new sch56xx-common.ko which contains code which will also be used in the new sch5636 driver. Signed-off-by: Hans de Goede Signed-off-by: Jean Delvare diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 5f888f7..0ed7677 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1041,8 +1041,13 @@ config SENSORS_SMSC47B397 This driver can also be built as a module. If so, the module will be called smsc47b397. +config SENSORS_SCH56XX_COMMON + tristate + default n + config SENSORS_SCH5627 tristate "SMSC SCH5627" + select SENSORS_SCH56XX_COMMON help If you say yes here you get support for the hardware monitoring features of the SMSC SCH5627 Super-I/O chip. diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 28061cf..ae59bca 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -95,6 +95,7 @@ obj-$(CONFIG_SENSORS_PC87360) += pc87360.o obj-$(CONFIG_SENSORS_PC87427) += pc87427.o obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o obj-$(CONFIG_SENSORS_S3C) += s3c-hwmon.o +obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o obj-$(CONFIG_SENSORS_SCH5627) += sch5627.o obj-$(CONFIG_SENSORS_SHT15) += sht15.o obj-$(CONFIG_SENSORS_SHT21) += sht21.o diff --git a/drivers/hwmon/sch5627.c b/drivers/hwmon/sch5627.c index 3494a4c..e3b5c60 100644 --- a/drivers/hwmon/sch5627.c +++ b/drivers/hwmon/sch5627.c @@ -28,33 +28,15 @@ #include #include #include -#include -#include -#include +#include "sch56xx-common.h" #define DRVNAME "sch5627" #define DEVNAME DRVNAME /* We only support one model */ -#define SIO_SCH5627_EM_LD 0x0C /* Embedded Microcontroller LD */ -#define SIO_UNLOCK_KEY 0x55 /* Key to enable Super-I/O */ -#define SIO_LOCK_KEY 0xAA /* Key to disable Super-I/O */ - -#define SIO_REG_LDSEL 0x07 /* Logical device select */ -#define SIO_REG_DEVID 0x20 /* Device ID */ -#define SIO_REG_ENABLE 0x30 /* Logical device enable */ -#define SIO_REG_ADDR 0x66 /* Logical device address (2 bytes) */ - -#define SIO_SCH5627_ID 0xC6 /* Chipset ID */ - -#define REGION_LENGTH 9 - #define SCH5627_HWMON_ID 0xa5 #define SCH5627_COMPANY_ID 0x5c #define SCH5627_PRIMARY_ID 0xa0 -#define SCH5627_CMD_READ 0x02 -#define SCH5627_CMD_WRITE 0x03 - #define SCH5627_REG_BUILD_CODE 0x39 #define SCH5627_REG_BUILD_ID 0x3a #define SCH5627_REG_HWMON_ID 0x3c @@ -111,182 +93,6 @@ struct sch5627_data { u16 in[SCH5627_NO_IN]; }; -static struct platform_device *sch5627_pdev; - -/* Super I/O functions */ -static inline int superio_inb(int base, int reg) -{ - outb(reg, base); - return inb(base + 1); -} - -static inline int superio_enter(int base) -{ - /* Don't step on other drivers' I/O space by accident */ - if (!request_muxed_region(base, 2, DRVNAME)) { - pr_err("I/O address 0x%04x already in use\n", base); - return -EBUSY; - } - - outb(SIO_UNLOCK_KEY, base); - - return 0; -} - -static inline void superio_select(int base, int ld) -{ - outb(SIO_REG_LDSEL, base); - outb(ld, base + 1); -} - -static inline void superio_exit(int base) -{ - outb(SIO_LOCK_KEY, base); - release_region(base, 2); -} - -static int sch5627_send_cmd(struct sch5627_data *data, u8 cmd, u16 reg, u8 v) -{ - u8 val; - int i; - /* - * According to SMSC for the commands we use the maximum time for - * the EM to respond is 15 ms, but testing shows in practice it - * responds within 15-32 reads, so we first busy poll, and if - * that fails sleep a bit and try again until we are way past - * the 15 ms maximum response time. - */ - const int max_busy_polls = 64; - const int max_lazy_polls = 32; - - /* (Optional) Write-Clear the EC to Host Mailbox Register */ - val = inb(data->addr + 1); - outb(val, data->addr + 1); - - /* Set Mailbox Address Pointer to first location in Region 1 */ - outb(0x00, data->addr + 2); - outb(0x80, data->addr + 3); - - /* Write Request Packet Header */ - outb(cmd, data->addr + 4); /* VREG Access Type read:0x02 write:0x03 */ - outb(0x01, data->addr + 5); /* # of Entries: 1 Byte (8-bit) */ - outb(0x04, data->addr + 2); /* Mailbox AP to first data entry loc. */ - - /* Write Value field */ - if (cmd == SCH5627_CMD_WRITE) - outb(v, data->addr + 4); - - /* Write Address field */ - outb(reg & 0xff, data->addr + 6); - outb(reg >> 8, data->addr + 7); - - /* Execute the Random Access Command */ - outb(0x01, data->addr); /* Write 01h to the Host-to-EC register */ - - /* EM Interface Polling "Algorithm" */ - for (i = 0; i < max_busy_polls + max_lazy_polls; i++) { - if (i >= max_busy_polls) - msleep(1); - /* Read Interrupt source Register */ - val = inb(data->addr + 8); - /* Write Clear the interrupt source bits */ - if (val) - outb(val, data->addr + 8); - /* Command Completed ? */ - if (val & 0x01) - break; - } - if (i == max_busy_polls + max_lazy_polls) { - pr_err("Max retries exceeded reading virtual " - "register 0x%04hx (%d)\n", reg, 1); - return -EIO; - } - - /* - * According to SMSC we may need to retry this, but sofar I've always - * seen this succeed in 1 try. - */ - for (i = 0; i < max_busy_polls; i++) { - /* Read EC-to-Host Register */ - val = inb(data->addr + 1); - /* Command Completed ? */ - if (val == 0x01) - break; - - if (i == 0) - pr_warn("EC reports: 0x%02x reading virtual register " - "0x%04hx\n", (unsigned int)val, reg); - } - if (i == max_busy_polls) { - pr_err("Max retries exceeded reading virtual " - "register 0x%04hx (%d)\n", reg, 2); - return -EIO; - } - - /* - * According to the SMSC app note we should now do: - * - * Set Mailbox Address Pointer to first location in Region 1 * - * outb(0x00, data->addr + 2); - * outb(0x80, data->addr + 3); - * - * But if we do that things don't work, so let's not. - */ - - /* Read Value field */ - if (cmd == SCH5627_CMD_READ) - return inb(data->addr + 4); - - return 0; -} - -static int sch5627_read_virtual_reg(struct sch5627_data *data, u16 reg) -{ - return sch5627_send_cmd(data, SCH5627_CMD_READ, reg, 0); -} - -static int sch5627_write_virtual_reg(struct sch5627_data *data, - u16 reg, u8 val) -{ - return sch5627_send_cmd(data, SCH5627_CMD_WRITE, reg, val); -} - -static int sch5627_read_virtual_reg16(struct sch5627_data *data, u16 reg) -{ - int lsb, msb; - - /* Read LSB first, this will cause the matching MSB to be latched */ - lsb = sch5627_read_virtual_reg(data, reg); - if (lsb < 0) - return lsb; - - msb = sch5627_read_virtual_reg(data, reg + 1); - if (msb < 0) - return msb; - - return lsb | (msb << 8); -} - -static int sch5627_read_virtual_reg12(struct sch5627_data *data, u16 msb_reg, - u16 lsn_reg, int high_nibble) -{ - int msb, lsn; - - /* Read MSB first, this will cause the matching LSN to be latched */ - msb = sch5627_read_virtual_reg(data, msb_reg); - if (msb < 0) - return msb; - - lsn = sch5627_read_virtual_reg(data, lsn_reg); - if (lsn < 0) - return lsn; - - if (high_nibble) - return (msb << 4) | (lsn >> 4); - else - return (msb << 4) | (lsn & 0x0f); -} - static struct sch5627_data *sch5627_update_device(struct device *dev) { struct sch5627_data *data = dev_get_drvdata(dev); @@ -297,7 +103,7 @@ static struct sch5627_data *sch5627_update_device(struct device *dev) /* Trigger a Vbat voltage measurement every 5 minutes */ if (time_after(jiffies, data->last_battery + 300 * HZ)) { - sch5627_write_virtual_reg(data, SCH5627_REG_CTRL, + sch56xx_write_virtual_reg(data->addr, SCH5627_REG_CTRL, data->control | 0x10); data->last_battery = jiffies; } @@ -305,7 +111,7 @@ static struct sch5627_data *sch5627_update_device(struct device *dev) /* Cache the values for 1 second */ if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { for (i = 0; i < SCH5627_NO_TEMPS; i++) { - val = sch5627_read_virtual_reg12(data, + val = sch56xx_read_virtual_reg12(data->addr, SCH5627_REG_TEMP_MSB[i], SCH5627_REG_TEMP_LSN[i], SCH5627_REG_TEMP_HIGH_NIBBLE[i]); @@ -317,7 +123,7 @@ static struct sch5627_data *sch5627_update_device(struct device *dev) } for (i = 0; i < SCH5627_NO_FANS; i++) { - val = sch5627_read_virtual_reg16(data, + val = sch56xx_read_virtual_reg16(data->addr, SCH5627_REG_FAN[i]); if (unlikely(val < 0)) { ret = ERR_PTR(val); @@ -327,7 +133,7 @@ static struct sch5627_data *sch5627_update_device(struct device *dev) } for (i = 0; i < SCH5627_NO_IN; i++) { - val = sch5627_read_virtual_reg12(data, + val = sch56xx_read_virtual_reg12(data->addr, SCH5627_REG_IN_MSB[i], SCH5627_REG_IN_LSN[i], SCH5627_REG_IN_HIGH_NIBBLE[i]); @@ -355,18 +161,21 @@ static int __devinit sch5627_read_limits(struct sch5627_data *data) * Note what SMSC calls ABS, is what lm_sensors calls max * (aka high), and HIGH is what lm_sensors calls crit. */ - val = sch5627_read_virtual_reg(data, SCH5627_REG_TEMP_ABS[i]); + val = sch56xx_read_virtual_reg(data->addr, + SCH5627_REG_TEMP_ABS[i]); if (val < 0) return val; data->temp_max[i] = val; - val = sch5627_read_virtual_reg(data, SCH5627_REG_TEMP_HIGH[i]); + val = sch56xx_read_virtual_reg(data->addr, + SCH5627_REG_TEMP_HIGH[i]); if (val < 0) return val; data->temp_crit[i] = val; } for (i = 0; i < SCH5627_NO_FANS; i++) { - val = sch5627_read_virtual_reg16(data, SCH5627_REG_FAN_MIN[i]); + val = sch56xx_read_virtual_reg16(data->addr, + SCH5627_REG_FAN_MIN[i]); if (val < 0) return val; data->fan_min[i] = val; @@ -667,7 +476,7 @@ static int __devinit sch5627_probe(struct platform_device *pdev) mutex_init(&data->update_lock); platform_set_drvdata(pdev, data); - val = sch5627_read_virtual_reg(data, SCH5627_REG_HWMON_ID); + val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_HWMON_ID); if (val < 0) { err = val; goto error; @@ -679,7 +488,7 @@ static int __devinit sch5627_probe(struct platform_device *pdev) goto error; } - val = sch5627_read_virtual_reg(data, SCH5627_REG_COMPANY_ID); + val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_COMPANY_ID); if (val < 0) { err = val; goto error; @@ -691,7 +500,7 @@ static int __devinit sch5627_probe(struct platform_device *pdev) goto error; } - val = sch5627_read_virtual_reg(data, SCH5627_REG_PRIMARY_ID); + val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_PRIMARY_ID); if (val < 0) { err = val; goto error; @@ -703,25 +512,28 @@ static int __devinit sch5627_probe(struct platform_device *pdev) goto error; } - build_code = sch5627_read_virtual_reg(data, SCH5627_REG_BUILD_CODE); + build_code = sch56xx_read_virtual_reg(data->addr, + SCH5627_REG_BUILD_CODE); if (build_code < 0) { err = build_code; goto error; } - build_id = sch5627_read_virtual_reg16(data, SCH5627_REG_BUILD_ID); + build_id = sch56xx_read_virtual_reg16(data->addr, + SCH5627_REG_BUILD_ID); if (build_id < 0) { err = build_id; goto error; } - hwmon_rev = sch5627_read_virtual_reg(data, SCH5627_REG_HWMON_REV); + hwmon_rev = sch56xx_read_virtual_reg(data->addr, + SCH5627_REG_HWMON_REV); if (hwmon_rev < 0) { err = hwmon_rev; goto error; } - val = sch5627_read_virtual_reg(data, SCH5627_REG_CTRL); + val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_CTRL); if (val < 0) { err = val; goto error; @@ -734,7 +546,7 @@ static int __devinit sch5627_probe(struct platform_device *pdev) } /* Trigger a Vbat voltage measurement, so that we get a valid reading the first time we read Vbat */ - sch5627_write_virtual_reg(data, SCH5627_REG_CTRL, + sch56xx_write_virtual_reg(data->addr, SCH5627_REG_CTRL, data->control | 0x10); data->last_battery = jiffies; @@ -746,6 +558,7 @@ static int __devinit sch5627_probe(struct platform_device *pdev) if (err) goto error; + pr_info("found %s chip at %#hx\n", DEVNAME, data->addr); pr_info("firmware build: code 0x%02X, id 0x%04X, hwmon: rev 0x%02X\n", build_code, build_id, hwmon_rev); @@ -768,85 +581,6 @@ error: return err; } -static int __init sch5627_find(int sioaddr, unsigned short *address) -{ - u8 devid; - int err = superio_enter(sioaddr); - if (err) - return err; - - devid = superio_inb(sioaddr, SIO_REG_DEVID); - if (devid != SIO_SCH5627_ID) { - pr_debug("Unsupported device id: 0x%02x\n", - (unsigned int)devid); - err = -ENODEV; - goto exit; - } - - superio_select(sioaddr, SIO_SCH5627_EM_LD); - - if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) { - pr_warn("Device not activated\n"); - err = -ENODEV; - goto exit; - } - - /* - * Warning the order of the low / high byte is the other way around - * as on most other superio devices!! - */ - *address = superio_inb(sioaddr, SIO_REG_ADDR) | - superio_inb(sioaddr, SIO_REG_ADDR + 1) << 8; - if (*address == 0) { - pr_warn("Base address not set\n"); - err = -ENODEV; - goto exit; - } - - pr_info("Found %s chip at %#hx\n", DEVNAME, *address); -exit: - superio_exit(sioaddr); - return err; -} - -static int __init sch5627_device_add(unsigned short address) -{ - struct resource res = { - .start = address, - .end = address + REGION_LENGTH - 1, - .flags = IORESOURCE_IO, - }; - int err; - - sch5627_pdev = platform_device_alloc(DRVNAME, address); - if (!sch5627_pdev) - return -ENOMEM; - - res.name = sch5627_pdev->name; - err = acpi_check_resource_conflict(&res); - if (err) - goto exit_device_put; - - err = platform_device_add_resources(sch5627_pdev, &res, 1); - if (err) { - pr_err("Device resource addition failed\n"); - goto exit_device_put; - } - - err = platform_device_add(sch5627_pdev); - if (err) { - pr_err("Device addition failed\n"); - goto exit_device_put; - } - - return 0; - -exit_device_put: - platform_device_put(sch5627_pdev); - - return err; -} - static struct platform_driver sch5627_driver = { .driver = { .owner = THIS_MODULE, @@ -858,31 +592,11 @@ static struct platform_driver sch5627_driver = { static int __init sch5627_init(void) { - int err = -ENODEV; - unsigned short address; - - if (sch5627_find(0x4e, &address) && sch5627_find(0x2e, &address)) - goto exit; - - err = platform_driver_register(&sch5627_driver); - if (err) - goto exit; - - err = sch5627_device_add(address); - if (err) - goto exit_driver; - - return 0; - -exit_driver: - platform_driver_unregister(&sch5627_driver); -exit: - return err; + return platform_driver_register(&sch5627_driver); } static void __exit sch5627_exit(void) { - platform_device_unregister(sch5627_pdev); platform_driver_unregister(&sch5627_driver); } diff --git a/drivers/hwmon/sch56xx-common.c b/drivers/hwmon/sch56xx-common.c new file mode 100644 index 0000000..a579313 --- /dev/null +++ b/drivers/hwmon/sch56xx-common.c @@ -0,0 +1,336 @@ +/*************************************************************************** + * Copyright (C) 2010-2011 Hans de Goede * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the * + * Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + ***************************************************************************/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include "sch56xx-common.h" + +#define SIO_SCH56XX_LD_EM 0x0C /* Embedded uController Logical Dev */ +#define SIO_UNLOCK_KEY 0x55 /* Key to enable Super-I/O */ +#define SIO_LOCK_KEY 0xAA /* Key to disable Super-I/O */ + +#define SIO_REG_LDSEL 0x07 /* Logical device select */ +#define SIO_REG_DEVID 0x20 /* Device ID */ +#define SIO_REG_ENABLE 0x30 /* Logical device enable */ +#define SIO_REG_ADDR 0x66 /* Logical device address (2 bytes) */ + +#define SIO_SCH5627_ID 0xC6 /* Chipset ID */ + +#define REGION_LENGTH 9 + +#define SCH56XX_CMD_READ 0x02 +#define SCH56XX_CMD_WRITE 0x03 + +static struct platform_device *sch56xx_pdev; + +/* Super I/O functions */ +static inline int superio_inb(int base, int reg) +{ + outb(reg, base); + return inb(base + 1); +} + +static inline int superio_enter(int base) +{ + /* Don't step on other drivers' I/O space by accident */ + if (!request_muxed_region(base, 2, "sch56xx")) { + pr_err("I/O address 0x%04x already in use\n", base); + return -EBUSY; + } + + outb(SIO_UNLOCK_KEY, base); + + return 0; +} + +static inline void superio_select(int base, int ld) +{ + outb(SIO_REG_LDSEL, base); + outb(ld, base + 1); +} + +static inline void superio_exit(int base) +{ + outb(SIO_LOCK_KEY, base); + release_region(base, 2); +} + +static int sch56xx_send_cmd(u16 addr, u8 cmd, u16 reg, u8 v) +{ + u8 val; + int i; + /* + * According to SMSC for the commands we use the maximum time for + * the EM to respond is 15 ms, but testing shows in practice it + * responds within 15-32 reads, so we first busy poll, and if + * that fails sleep a bit and try again until we are way past + * the 15 ms maximum response time. + */ + const int max_busy_polls = 64; + const int max_lazy_polls = 32; + + /* (Optional) Write-Clear the EC to Host Mailbox Register */ + val = inb(addr + 1); + outb(val, addr + 1); + + /* Set Mailbox Address Pointer to first location in Region 1 */ + outb(0x00, addr + 2); + outb(0x80, addr + 3); + + /* Write Request Packet Header */ + outb(cmd, addr + 4); /* VREG Access Type read:0x02 write:0x03 */ + outb(0x01, addr + 5); /* # of Entries: 1 Byte (8-bit) */ + outb(0x04, addr + 2); /* Mailbox AP to first data entry loc. */ + + /* Write Value field */ + if (cmd == SCH56XX_CMD_WRITE) + outb(v, addr + 4); + + /* Write Address field */ + outb(reg & 0xff, addr + 6); + outb(reg >> 8, addr + 7); + + /* Execute the Random Access Command */ + outb(0x01, addr); /* Write 01h to the Host-to-EC register */ + + /* EM Interface Polling "Algorithm" */ + for (i = 0; i < max_busy_polls + max_lazy_polls; i++) { + if (i >= max_busy_polls) + msleep(1); + /* Read Interrupt source Register */ + val = inb(addr + 8); + /* Write Clear the interrupt source bits */ + if (val) + outb(val, addr + 8); + /* Command Completed ? */ + if (val & 0x01) + break; + } + if (i == max_busy_polls + max_lazy_polls) { + pr_err("Max retries exceeded reading virtual " + "register 0x%04hx (%d)\n", reg, 1); + return -EIO; + } + + /* + * According to SMSC we may need to retry this, but sofar I've always + * seen this succeed in 1 try. + */ + for (i = 0; i < max_busy_polls; i++) { + /* Read EC-to-Host Register */ + val = inb(addr + 1); + /* Command Completed ? */ + if (val == 0x01) + break; + + if (i == 0) + pr_warn("EC reports: 0x%02x reading virtual register " + "0x%04hx\n", (unsigned int)val, reg); + } + if (i == max_busy_polls) { + pr_err("Max retries exceeded reading virtual " + "register 0x%04hx (%d)\n", reg, 2); + return -EIO; + } + + /* + * According to the SMSC app note we should now do: + * + * Set Mailbox Address Pointer to first location in Region 1 * + * outb(0x00, addr + 2); + * outb(0x80, addr + 3); + * + * But if we do that things don't work, so let's not. + */ + + /* Read Value field */ + if (cmd == SCH56XX_CMD_READ) + return inb(addr + 4); + + return 0; +} + +int sch56xx_read_virtual_reg(u16 addr, u16 reg) +{ + return sch56xx_send_cmd(addr, SCH56XX_CMD_READ, reg, 0); +} +EXPORT_SYMBOL(sch56xx_read_virtual_reg); + +int sch56xx_write_virtual_reg(u16 addr, u16 reg, u8 val) +{ + return sch56xx_send_cmd(addr, SCH56XX_CMD_WRITE, reg, val); +} +EXPORT_SYMBOL(sch56xx_write_virtual_reg); + +int sch56xx_read_virtual_reg16(u16 addr, u16 reg) +{ + int lsb, msb; + + /* Read LSB first, this will cause the matching MSB to be latched */ + lsb = sch56xx_read_virtual_reg(addr, reg); + if (lsb < 0) + return lsb; + + msb = sch56xx_read_virtual_reg(addr, reg + 1); + if (msb < 0) + return msb; + + return lsb | (msb << 8); +} +EXPORT_SYMBOL(sch56xx_read_virtual_reg16); + +int sch56xx_read_virtual_reg12(u16 addr, u16 msb_reg, u16 lsn_reg, + int high_nibble) +{ + int msb, lsn; + + /* Read MSB first, this will cause the matching LSN to be latched */ + msb = sch56xx_read_virtual_reg(addr, msb_reg); + if (msb < 0) + return msb; + + lsn = sch56xx_read_virtual_reg(addr, lsn_reg); + if (lsn < 0) + return lsn; + + if (high_nibble) + return (msb << 4) | (lsn >> 4); + else + return (msb << 4) | (lsn & 0x0f); +} +EXPORT_SYMBOL(sch56xx_read_virtual_reg12); + +static int __init sch56xx_find(int sioaddr, unsigned short *address, + const char **name) +{ + u8 devid; + int err; + + err = superio_enter(sioaddr); + if (err) + return err; + + devid = superio_inb(sioaddr, SIO_REG_DEVID); + switch (devid) { + case SIO_SCH5627_ID: + *name = "sch5627"; + break; + default: + pr_debug("Unsupported device id: 0x%02x\n", + (unsigned int)devid); + err = -ENODEV; + goto exit; + } + + superio_select(sioaddr, SIO_SCH56XX_LD_EM); + + if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) { + pr_warn("Device not activated\n"); + err = -ENODEV; + goto exit; + } + + /* + * Warning the order of the low / high byte is the other way around + * as on most other superio devices!! + */ + *address = superio_inb(sioaddr, SIO_REG_ADDR) | + superio_inb(sioaddr, SIO_REG_ADDR + 1) << 8; + if (*address == 0) { + pr_warn("Base address not set\n"); + err = -ENODEV; + goto exit; + } + +exit: + superio_exit(sioaddr); + return err; +} + +static int __init sch56xx_device_add(unsigned short address, const char *name) +{ + struct resource res = { + .start = address, + .end = address + REGION_LENGTH - 1, + .flags = IORESOURCE_IO, + }; + int err; + + sch56xx_pdev = platform_device_alloc(name, address); + if (!sch56xx_pdev) + return -ENOMEM; + + res.name = sch56xx_pdev->name; + err = acpi_check_resource_conflict(&res); + if (err) + goto exit_device_put; + + err = platform_device_add_resources(sch56xx_pdev, &res, 1); + if (err) { + pr_err("Device resource addition failed\n"); + goto exit_device_put; + } + + err = platform_device_add(sch56xx_pdev); + if (err) { + pr_err("Device addition failed\n"); + goto exit_device_put; + } + + return 0; + +exit_device_put: + platform_device_put(sch56xx_pdev); + + return err; +} + +static int __init sch56xx_init(void) +{ + int err; + unsigned short address; + const char *name; + + err = sch56xx_find(0x4e, &address, &name); + if (err) + err = sch56xx_find(0x2e, &address, &name); + if (err) + return err; + + return sch56xx_device_add(address, name); +} + +static void __exit sch56xx_exit(void) +{ + platform_device_unregister(sch56xx_pdev); +} + +MODULE_DESCRIPTION("SMSC SCH56xx Hardware Monitoring Common Code"); +MODULE_AUTHOR("Hans de Goede "); +MODULE_LICENSE("GPL"); + +module_init(sch56xx_init); +module_exit(sch56xx_exit); diff --git a/drivers/hwmon/sch56xx-common.h b/drivers/hwmon/sch56xx-common.h new file mode 100644 index 0000000..d5eaf3b --- /dev/null +++ b/drivers/hwmon/sch56xx-common.h @@ -0,0 +1,24 @@ +/*************************************************************************** + * Copyright (C) 2010-2011 Hans de Goede * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the * + * Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + ***************************************************************************/ + +int sch56xx_read_virtual_reg(u16 addr, u16 reg); +int sch56xx_write_virtual_reg(u16 addr, u16 reg, u8 val); +int sch56xx_read_virtual_reg16(u16 addr, u16 reg); +int sch56xx_read_virtual_reg12(u16 addr, u16 msb_reg, u16 lsn_reg, + int high_nibble); -- cgit v0.10.2