From 03efed8a2a1b8e00164eb4720a82a7dd5e368a8e Mon Sep 17 00:00:00 2001 From: Tiger Yang Date: Sat, 28 May 2011 00:34:19 +0800 Subject: ocfs2: Bugfix for hard readonly mount ocfs2 cannot currently mount a device that is readonly at the media ("hard readonly"). Fix the broken places. see detail: http://oss.oracle.com/bugzilla/show_bug.cgi?id=1322 [ Description edited -- Joel ] Signed-off-by: Tiger Yang Reviewed-by: Sunil Mushran Signed-off-by: Joel Becker diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index 7642d7c..da103f5 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -1692,7 +1692,7 @@ int ocfs2_open_lock(struct inode *inode) mlog(0, "inode %llu take PRMODE open lock\n", (unsigned long long)OCFS2_I(inode)->ip_blkno); - if (ocfs2_mount_local(osb)) + if (ocfs2_is_hard_readonly(osb) || ocfs2_mount_local(osb)) goto out; lockres = &OCFS2_I(inode)->ip_open_lockres; @@ -1718,6 +1718,12 @@ int ocfs2_try_open_lock(struct inode *inode, int write) (unsigned long long)OCFS2_I(inode)->ip_blkno, write ? "EXMODE" : "PRMODE"); + if (ocfs2_is_hard_readonly(osb)) { + if (write) + status = -EROFS; + goto out; + } + if (ocfs2_mount_local(osb)) goto out; @@ -2298,7 +2304,7 @@ int ocfs2_inode_lock_full_nested(struct inode *inode, if (ocfs2_is_hard_readonly(osb)) { if (ex) status = -EROFS; - goto bail; + goto getbh; } if (ocfs2_mount_local(osb)) @@ -2356,7 +2362,7 @@ local: mlog_errno(status); goto bail; } - +getbh: if (ret_bh) { status = ocfs2_assign_bh(inode, ret_bh, local_bh); if (status < 0) { @@ -2628,8 +2634,11 @@ int ocfs2_dentry_lock(struct dentry *dentry, int ex) BUG_ON(!dl); - if (ocfs2_is_hard_readonly(osb)) - return -EROFS; + if (ocfs2_is_hard_readonly(osb)) { + if (ex) + return -EROFS; + return 0; + } if (ocfs2_mount_local(osb)) return 0; @@ -2647,7 +2656,7 @@ void ocfs2_dentry_unlock(struct dentry *dentry, int ex) struct ocfs2_dentry_lock *dl = dentry->d_fsdata; struct ocfs2_super *osb = OCFS2_SB(dentry->d_sb); - if (!ocfs2_mount_local(osb)) + if (!ocfs2_is_hard_readonly(osb) && !ocfs2_mount_local(osb)) ocfs2_cluster_unlock(osb, &dl->dl_lockres, level); } diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index cdbaf5e..029c4cd 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -1974,7 +1974,8 @@ static void ocfs2_dismount_volume(struct super_block *sb, int mnt_err) * If we failed before we got a uuid_str yet, we can't stop * heartbeat. Otherwise, do it. */ - if (!mnt_err && !ocfs2_mount_local(osb) && osb->uuid_str) + if (!mnt_err && !ocfs2_mount_local(osb) && osb->uuid_str && + !ocfs2_is_hard_readonly(osb)) hangup_needed = 1; if (osb->cconn) -- cgit v0.10.2 From 3d75be7c4771c7e4d5b5fa586a599af8473de32c Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 29 May 2011 22:56:31 +0300 Subject: ocfs2: checking the wrong variable in ocfs2_move_extent() "new_phys_cpos" is always a valid pointer here. ocfs2_probe_alloc_group() allocates "*new_phys_cpos". Signed-off-by: Dan Carpenter Signed-off-by: Joel Becker diff --git a/fs/ocfs2/move_extents.c b/fs/ocfs2/move_extents.c index cd94270..d3433d6 100644 --- a/fs/ocfs2/move_extents.c +++ b/fs/ocfs2/move_extents.c @@ -746,7 +746,7 @@ static int ocfs2_move_extent(struct ocfs2_move_extents_context *context, */ ocfs2_probe_alloc_group(inode, gd_bh, &goal_bit, len, move_max_hop, new_phys_cpos); - if (!new_phys_cpos) { + if (!*new_phys_cpos) { ret = -ENOSPC; goto out_commit; } -- cgit v0.10.2 From 87f0d5c8db7aad85b9120c26723fdc63cd84a460 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 29 May 2011 22:57:16 +0300 Subject: ocfs2: null deref on allocation error The original code had a null derefence in the error handling. Signed-off-by: Dan Carpenter Signed-off-by: Joel Becker diff --git a/fs/ocfs2/ioctl.c b/fs/ocfs2/ioctl.c index bc91072..d9a6ce7 100644 --- a/fs/ocfs2/ioctl.c +++ b/fs/ocfs2/ioctl.c @@ -381,7 +381,7 @@ int ocfs2_info_handle_freeinode(struct inode *inode, if (!oifi) { status = -ENOMEM; mlog_errno(status); - goto bail; + goto out_err; } if (o2info_from_user(*oifi, req)) @@ -431,7 +431,7 @@ bail: o2info_set_request_error(&oifi->ifi_req, req); kfree(oifi); - +out_err: return status; } @@ -666,7 +666,7 @@ int ocfs2_info_handle_freefrag(struct inode *inode, if (!oiff) { status = -ENOMEM; mlog_errno(status); - goto bail; + goto out_err; } if (o2info_from_user(*oiff, req)) @@ -716,7 +716,7 @@ bail: o2info_set_request_error(&oiff->iff_req, req); kfree(oiff); - +out_err: return status; } -- cgit v0.10.2 From 730e663bd82c1a10a85ff00728d34152a5a67ec8 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Mon, 30 May 2011 21:58:05 +0900 Subject: ocfs2: use proper little-endian bitops Using __test_and_{set,clear}_bit_le() with ignoring its return value can be replaced with __{set,clear}_bit_le(). Signed-off-by: Akinobu Mita Cc: Joel Becker Cc: Mark Fasheh Cc: ocfs2-devel@oss.oracle.com Signed-off-by: Joel Becker diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h index 4092858..bcde467 100644 --- a/fs/ocfs2/ocfs2.h +++ b/fs/ocfs2/ocfs2.h @@ -836,13 +836,13 @@ static inline unsigned int ocfs2_clusters_to_megabytes(struct super_block *sb, static inline void _ocfs2_set_bit(unsigned int bit, unsigned long *bitmap) { - __test_and_set_bit_le(bit, bitmap); + __set_bit_le(bit, bitmap); } #define ocfs2_set_bit(bit, addr) _ocfs2_set_bit((bit), (unsigned long *)(addr)) static inline void _ocfs2_clear_bit(unsigned int bit, unsigned long *bitmap) { - __test_and_clear_bit_le(bit, bitmap); + __clear_bit_le(bit, bitmap); } #define ocfs2_clear_bit(bit, addr) _ocfs2_clear_bit((bit), (unsigned long *)(addr)) -- cgit v0.10.2 From d2eece376648d2f7ba0a7d78f3c4d0421e608ac2 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Sun, 24 Jul 2011 10:21:54 -0700 Subject: ocfs2/cluster: Abort heartbeat start on hard-ro devices Currently if the heartbeat device is hard-ro, the o2hb thread keeps chugging along and dumping errors along the way. The user needs to manually stop the heartbeat. The patch addresses this shortcoming by adding a limit to the number of times the hb thread will iterate in an unsteady state. If the hb thread does not ready steady state in that many interation, the start is aborted. Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c index 9a3e6bb..4728a74 100644 --- a/fs/ocfs2/cluster/heartbeat.c +++ b/fs/ocfs2/cluster/heartbeat.c @@ -216,6 +216,7 @@ struct o2hb_region { struct list_head hr_all_item; unsigned hr_unclean_stop:1, + hr_aborted_start:1, hr_item_pinned:1, hr_item_dropped:1; @@ -254,6 +255,10 @@ struct o2hb_region { * a more complete api that doesn't lead to this sort of fragility. */ atomic_t hr_steady_iterations; + /* terminate o2hb thread if it does not reach steady state + * (hr_steady_iterations == 0) within hr_unsteady_iterations */ + atomic_t hr_unsteady_iterations; + char hr_dev_name[BDEVNAME_SIZE]; unsigned int hr_timeout_ms; @@ -324,6 +329,10 @@ static void o2hb_write_timeout(struct work_struct *work) static void o2hb_arm_write_timeout(struct o2hb_region *reg) { + /* Arm writeout only after thread reaches steady state */ + if (atomic_read(®->hr_steady_iterations) != 0) + return; + mlog(ML_HEARTBEAT, "Queue write timeout for %u ms\n", O2HB_MAX_WRITE_TIMEOUT_MS); @@ -537,9 +546,14 @@ static int o2hb_verify_crc(struct o2hb_region *reg, return read == computed; } -/* We want to make sure that nobody is heartbeating on top of us -- - * this will help detect an invalid configuration. */ -static void o2hb_check_last_timestamp(struct o2hb_region *reg) +/* + * Compare the slot data with what we wrote in the last iteration. + * If the match fails, print an appropriate error message. This is to + * detect errors like... another node hearting on the same slot, + * flaky device that is losing writes, etc. + * Returns 1 if check succeeds, 0 otherwise. + */ +static int o2hb_check_own_slot(struct o2hb_region *reg) { struct o2hb_disk_slot *slot; struct o2hb_disk_heartbeat_block *hb_block; @@ -548,13 +562,13 @@ static void o2hb_check_last_timestamp(struct o2hb_region *reg) slot = ®->hr_slots[o2nm_this_node()]; /* Don't check on our 1st timestamp */ if (!slot->ds_last_time) - return; + return 0; hb_block = slot->ds_raw_block; if (le64_to_cpu(hb_block->hb_seq) == slot->ds_last_time && le64_to_cpu(hb_block->hb_generation) == slot->ds_last_generation && hb_block->hb_node == slot->ds_node_num) - return; + return 1; #define ERRSTR1 "Another node is heartbeating on device" #define ERRSTR2 "Heartbeat generation mismatch on device" @@ -574,6 +588,8 @@ static void o2hb_check_last_timestamp(struct o2hb_region *reg) (unsigned long long)slot->ds_last_time, hb_block->hb_node, (unsigned long long)le64_to_cpu(hb_block->hb_generation), (unsigned long long)le64_to_cpu(hb_block->hb_seq)); + + return 0; } static inline void o2hb_prepare_block(struct o2hb_region *reg, @@ -719,17 +735,24 @@ static void o2hb_shutdown_slot(struct o2hb_disk_slot *slot) o2nm_node_put(node); } -static void o2hb_set_quorum_device(struct o2hb_region *reg, - struct o2hb_disk_slot *slot) +static void o2hb_set_quorum_device(struct o2hb_region *reg) { - assert_spin_locked(&o2hb_live_lock); - if (!o2hb_global_heartbeat_active()) return; - if (test_bit(reg->hr_region_num, o2hb_quorum_region_bitmap)) + /* Prevent race with o2hb_heartbeat_group_drop_item() */ + if (kthread_should_stop()) + return; + + /* Tag region as quorum only after thread reaches steady state */ + if (atomic_read(®->hr_steady_iterations) != 0) return; + spin_lock(&o2hb_live_lock); + + if (test_bit(reg->hr_region_num, o2hb_quorum_region_bitmap)) + goto unlock; + /* * A region can be added to the quorum only when it sees all * live nodes heartbeat on it. In other words, the region has been @@ -737,13 +760,10 @@ static void o2hb_set_quorum_device(struct o2hb_region *reg, */ if (memcmp(reg->hr_live_node_bitmap, o2hb_live_node_bitmap, sizeof(o2hb_live_node_bitmap))) - return; - - if (slot->ds_changed_samples < O2HB_LIVE_THRESHOLD) - return; + goto unlock; - printk(KERN_NOTICE "o2hb: Region %s is now a quorum device\n", - config_item_name(®->hr_item)); + printk(KERN_NOTICE "o2hb: Region %s (%s) is now a quorum device\n", + config_item_name(®->hr_item), reg->hr_dev_name); set_bit(reg->hr_region_num, o2hb_quorum_region_bitmap); @@ -754,6 +774,8 @@ static void o2hb_set_quorum_device(struct o2hb_region *reg, if (o2hb_pop_count(&o2hb_quorum_region_bitmap, O2NM_MAX_REGIONS) > O2HB_PIN_CUT_OFF) o2hb_region_unpin(NULL); +unlock: + spin_unlock(&o2hb_live_lock); } static int o2hb_check_slot(struct o2hb_region *reg, @@ -925,8 +947,6 @@ fire_callbacks: slot->ds_equal_samples = 0; } out: - o2hb_set_quorum_device(reg, slot); - spin_unlock(&o2hb_live_lock); o2hb_run_event_list(&event); @@ -957,7 +977,8 @@ static int o2hb_highest_node(unsigned long *nodes, static int o2hb_do_disk_heartbeat(struct o2hb_region *reg) { - int i, ret, highest_node, change = 0; + int i, ret, highest_node; + int membership_change = 0, own_slot_ok = 0; unsigned long configured_nodes[BITS_TO_LONGS(O2NM_MAX_NODES)]; unsigned long live_node_bitmap[BITS_TO_LONGS(O2NM_MAX_NODES)]; struct o2hb_bio_wait_ctxt write_wc; @@ -966,7 +987,7 @@ static int o2hb_do_disk_heartbeat(struct o2hb_region *reg) sizeof(configured_nodes)); if (ret) { mlog_errno(ret); - return ret; + goto bail; } /* @@ -982,8 +1003,9 @@ static int o2hb_do_disk_heartbeat(struct o2hb_region *reg) highest_node = o2hb_highest_node(configured_nodes, O2NM_MAX_NODES); if (highest_node >= O2NM_MAX_NODES) { - mlog(ML_NOTICE, "ocfs2_heartbeat: no configured nodes found!\n"); - return -EINVAL; + mlog(ML_NOTICE, "o2hb: No configured nodes found!\n"); + ret = -EINVAL; + goto bail; } /* No sense in reading the slots of nodes that don't exist @@ -993,29 +1015,27 @@ static int o2hb_do_disk_heartbeat(struct o2hb_region *reg) ret = o2hb_read_slots(reg, highest_node + 1); if (ret < 0) { mlog_errno(ret); - return ret; + goto bail; } /* With an up to date view of the slots, we can check that no * other node has been improperly configured to heartbeat in * our slot. */ - o2hb_check_last_timestamp(reg); + own_slot_ok = o2hb_check_own_slot(reg); /* fill in the proper info for our next heartbeat */ o2hb_prepare_block(reg, reg->hr_generation); - /* And fire off the write. Note that we don't wait on this I/O - * until later. */ ret = o2hb_issue_node_write(reg, &write_wc); if (ret < 0) { mlog_errno(ret); - return ret; + goto bail; } i = -1; while((i = find_next_bit(configured_nodes, O2NM_MAX_NODES, i + 1)) < O2NM_MAX_NODES) { - change |= o2hb_check_slot(reg, ®->hr_slots[i]); + membership_change |= o2hb_check_slot(reg, ®->hr_slots[i]); } /* @@ -1030,18 +1050,39 @@ static int o2hb_do_disk_heartbeat(struct o2hb_region *reg) * disk */ mlog(ML_ERROR, "Write error %d on device \"%s\"\n", write_wc.wc_error, reg->hr_dev_name); - return write_wc.wc_error; + ret = write_wc.wc_error; + goto bail; } - o2hb_arm_write_timeout(reg); + /* Skip disarming the timeout if own slot has stale/bad data */ + if (own_slot_ok) { + o2hb_set_quorum_device(reg); + o2hb_arm_write_timeout(reg); + } +bail: /* let the person who launched us know when things are steady */ - if (!change && (atomic_read(®->hr_steady_iterations) != 0)) { - if (atomic_dec_and_test(®->hr_steady_iterations)) + if (atomic_read(®->hr_steady_iterations) != 0) { + if (!ret && own_slot_ok && !membership_change) { + if (atomic_dec_and_test(®->hr_steady_iterations)) + wake_up(&o2hb_steady_queue); + } + } + + if (atomic_read(®->hr_steady_iterations) != 0) { + if (atomic_dec_and_test(®->hr_unsteady_iterations)) { + printk(KERN_NOTICE "o2hb: Unable to stabilize " + "heartbeart on region %s (%s)\n", + config_item_name(®->hr_item), + reg->hr_dev_name); + atomic_set(®->hr_steady_iterations, 0); + reg->hr_aborted_start = 1; wake_up(&o2hb_steady_queue); + ret = -EIO; + } } - return 0; + return ret; } /* Subtract b from a, storing the result in a. a *must* have a larger @@ -1095,7 +1136,8 @@ static int o2hb_thread(void *data) /* Pin node */ o2nm_depend_this_node(); - while (!kthread_should_stop() && !reg->hr_unclean_stop) { + while (!kthread_should_stop() && + !reg->hr_unclean_stop && !reg->hr_aborted_start) { /* We track the time spent inside * o2hb_do_disk_heartbeat so that we avoid more than * hr_timeout_ms between disk writes. On busy systems @@ -1103,10 +1145,7 @@ static int o2hb_thread(void *data) * likely to time itself out. */ do_gettimeofday(&before_hb); - i = 0; - do { - ret = o2hb_do_disk_heartbeat(reg); - } while (ret && ++i < 2); + ret = o2hb_do_disk_heartbeat(reg); do_gettimeofday(&after_hb); elapsed_msec = o2hb_elapsed_msecs(&before_hb, &after_hb); @@ -1117,7 +1156,8 @@ static int o2hb_thread(void *data) after_hb.tv_sec, (unsigned long) after_hb.tv_usec, elapsed_msec); - if (elapsed_msec < reg->hr_timeout_ms) { + if (!kthread_should_stop() && + elapsed_msec < reg->hr_timeout_ms) { /* the kthread api has blocked signals for us so no * need to record the return value. */ msleep_interruptible(reg->hr_timeout_ms - elapsed_msec); @@ -1134,20 +1174,20 @@ static int o2hb_thread(void *data) * to timeout on this region when we could just as easily * write a clear generation - thus indicating to them that * this node has left this region. - * - * XXX: Should we skip this on unclean_stop? */ - o2hb_prepare_block(reg, 0); - ret = o2hb_issue_node_write(reg, &write_wc); - if (ret == 0) { - o2hb_wait_on_io(reg, &write_wc); - } else { - mlog_errno(ret); + */ + if (!reg->hr_unclean_stop && !reg->hr_aborted_start) { + o2hb_prepare_block(reg, 0); + ret = o2hb_issue_node_write(reg, &write_wc); + if (ret == 0) + o2hb_wait_on_io(reg, &write_wc); + else + mlog_errno(ret); } /* Unpin node */ o2nm_undepend_this_node(); - mlog(ML_HEARTBEAT|ML_KTHREAD, "hb thread exiting\n"); + mlog(ML_HEARTBEAT|ML_KTHREAD, "o2hb thread exiting\n"); return 0; } @@ -1426,6 +1466,8 @@ static void o2hb_region_release(struct config_item *item) struct page *page; struct o2hb_region *reg = to_o2hb_region(item); + mlog(ML_HEARTBEAT, "hb region release (%s)\n", reg->hr_dev_name); + if (reg->hr_tmp_block) kfree(reg->hr_tmp_block); @@ -1792,7 +1834,10 @@ static ssize_t o2hb_region_dev_write(struct o2hb_region *reg, live_threshold <<= 1; spin_unlock(&o2hb_live_lock); } - atomic_set(®->hr_steady_iterations, live_threshold + 1); + ++live_threshold; + atomic_set(®->hr_steady_iterations, live_threshold); + /* unsteady_iterations is double the steady_iterations */ + atomic_set(®->hr_unsteady_iterations, (live_threshold << 1)); hb_task = kthread_run(o2hb_thread, reg, "o2hb-%s", reg->hr_item.ci_name); @@ -1809,14 +1854,12 @@ static ssize_t o2hb_region_dev_write(struct o2hb_region *reg, ret = wait_event_interruptible(o2hb_steady_queue, atomic_read(®->hr_steady_iterations) == 0); if (ret) { - /* We got interrupted (hello ptrace!). Clean up */ - spin_lock(&o2hb_live_lock); - hb_task = reg->hr_task; - reg->hr_task = NULL; - spin_unlock(&o2hb_live_lock); + atomic_set(®->hr_steady_iterations, 0); + reg->hr_aborted_start = 1; + } - if (hb_task) - kthread_stop(hb_task); + if (reg->hr_aborted_start) { + ret = -EIO; goto out; } @@ -1833,8 +1876,8 @@ static ssize_t o2hb_region_dev_write(struct o2hb_region *reg, ret = -EIO; if (hb_task && o2hb_global_heartbeat_active()) - printk(KERN_NOTICE "o2hb: Heartbeat started on region %s\n", - config_item_name(®->hr_item)); + printk(KERN_NOTICE "o2hb: Heartbeat started on region %s (%s)\n", + config_item_name(®->hr_item), reg->hr_dev_name); out: if (filp) @@ -2092,13 +2135,6 @@ static void o2hb_heartbeat_group_drop_item(struct config_group *group, /* stop the thread when the user removes the region dir */ spin_lock(&o2hb_live_lock); - if (o2hb_global_heartbeat_active()) { - clear_bit(reg->hr_region_num, o2hb_region_bitmap); - clear_bit(reg->hr_region_num, o2hb_live_region_bitmap); - if (test_bit(reg->hr_region_num, o2hb_quorum_region_bitmap)) - quorum_region = 1; - clear_bit(reg->hr_region_num, o2hb_quorum_region_bitmap); - } hb_task = reg->hr_task; reg->hr_task = NULL; reg->hr_item_dropped = 1; @@ -2107,19 +2143,30 @@ static void o2hb_heartbeat_group_drop_item(struct config_group *group, if (hb_task) kthread_stop(hb_task); + if (o2hb_global_heartbeat_active()) { + spin_lock(&o2hb_live_lock); + clear_bit(reg->hr_region_num, o2hb_region_bitmap); + clear_bit(reg->hr_region_num, o2hb_live_region_bitmap); + if (test_bit(reg->hr_region_num, o2hb_quorum_region_bitmap)) + quorum_region = 1; + clear_bit(reg->hr_region_num, o2hb_quorum_region_bitmap); + spin_unlock(&o2hb_live_lock); + printk(KERN_NOTICE "o2hb: Heartbeat %s on region %s (%s)\n", + ((atomic_read(®->hr_steady_iterations) == 0) ? + "stopped" : "start aborted"), config_item_name(item), + reg->hr_dev_name); + } + /* * If we're racing a dev_write(), we need to wake them. They will * check reg->hr_task */ if (atomic_read(®->hr_steady_iterations) != 0) { + reg->hr_aborted_start = 1; atomic_set(®->hr_steady_iterations, 0); wake_up(&o2hb_steady_queue); } - if (o2hb_global_heartbeat_active()) - printk(KERN_NOTICE "o2hb: Heartbeat stopped on region %s\n", - config_item_name(®->hr_item)); - config_item_put(item); if (!o2hb_global_heartbeat_active() || !quorum_region) -- cgit v0.10.2 From 1dfecf810e0eacb35987905082f23e5c2cd26e91 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Sun, 24 Jul 2011 10:22:54 -0700 Subject: ocfs2/cluster: Clean up messages in o2net o2net messages needed a facelift. Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c index db5ee4b..6e97895 100644 --- a/fs/ocfs2/cluster/tcp.c +++ b/fs/ocfs2/cluster/tcp.c @@ -545,7 +545,7 @@ static void o2net_set_nn_state(struct o2net_node *nn, } if (was_valid && !valid) { - printk(KERN_NOTICE "o2net: no longer connected to " + printk(KERN_NOTICE "o2net: No longer connected to " SC_NODEF_FMT "\n", SC_NODEF_ARGS(old_sc)); o2net_complete_nodes_nsw(nn); } @@ -555,7 +555,7 @@ static void o2net_set_nn_state(struct o2net_node *nn, cancel_delayed_work(&nn->nn_connect_expired); printk(KERN_NOTICE "o2net: %s " SC_NODEF_FMT "\n", o2nm_this_node() > sc->sc_node->nd_num ? - "connected to" : "accepted connection from", + "Connected to" : "Accepted connection from", SC_NODEF_ARGS(sc)); } @@ -643,7 +643,7 @@ static void o2net_state_change(struct sock *sk) o2net_sc_queue_work(sc, &sc->sc_connect_work); break; default: - printk(KERN_INFO "o2net: connection to " SC_NODEF_FMT + printk(KERN_INFO "o2net: Connection to " SC_NODEF_FMT " shutdown, state %d\n", SC_NODEF_ARGS(sc), sk->sk_state); o2net_sc_queue_work(sc, &sc->sc_shutdown_work); @@ -1284,11 +1284,11 @@ static int o2net_check_handshake(struct o2net_sock_container *sc) struct o2net_node *nn = o2net_nn_from_num(sc->sc_node->nd_num); if (hand->protocol_version != cpu_to_be64(O2NET_PROTOCOL_VERSION)) { - mlog(ML_NOTICE, SC_NODEF_FMT " advertised net protocol " - "version %llu but %llu is required, disconnecting\n", - SC_NODEF_ARGS(sc), - (unsigned long long)be64_to_cpu(hand->protocol_version), - O2NET_PROTOCOL_VERSION); + printk(KERN_NOTICE "o2net: " SC_NODEF_FMT " Advertised net " + "protocol version %llu but %llu is required. " + "Disconnecting.\n", SC_NODEF_ARGS(sc), + (unsigned long long)be64_to_cpu(hand->protocol_version), + O2NET_PROTOCOL_VERSION); /* don't bother reconnecting if its the wrong version. */ o2net_ensure_shutdown(nn, sc, -ENOTCONN); @@ -1302,33 +1302,33 @@ static int o2net_check_handshake(struct o2net_sock_container *sc) */ if (be32_to_cpu(hand->o2net_idle_timeout_ms) != o2net_idle_timeout()) { - mlog(ML_NOTICE, SC_NODEF_FMT " uses a network idle timeout of " - "%u ms, but we use %u ms locally. disconnecting\n", - SC_NODEF_ARGS(sc), - be32_to_cpu(hand->o2net_idle_timeout_ms), - o2net_idle_timeout()); + printk(KERN_NOTICE "o2net: " SC_NODEF_FMT " uses a network " + "idle timeout of %u ms, but we use %u ms locally. " + "Disconnecting.\n", SC_NODEF_ARGS(sc), + be32_to_cpu(hand->o2net_idle_timeout_ms), + o2net_idle_timeout()); o2net_ensure_shutdown(nn, sc, -ENOTCONN); return -1; } if (be32_to_cpu(hand->o2net_keepalive_delay_ms) != o2net_keepalive_delay()) { - mlog(ML_NOTICE, SC_NODEF_FMT " uses a keepalive delay of " - "%u ms, but we use %u ms locally. disconnecting\n", - SC_NODEF_ARGS(sc), - be32_to_cpu(hand->o2net_keepalive_delay_ms), - o2net_keepalive_delay()); + printk(KERN_NOTICE "o2net: " SC_NODEF_FMT " uses a keepalive " + "delay of %u ms, but we use %u ms locally. " + "Disconnecting.\n", SC_NODEF_ARGS(sc), + be32_to_cpu(hand->o2net_keepalive_delay_ms), + o2net_keepalive_delay()); o2net_ensure_shutdown(nn, sc, -ENOTCONN); return -1; } if (be32_to_cpu(hand->o2hb_heartbeat_timeout_ms) != O2HB_MAX_WRITE_TIMEOUT_MS) { - mlog(ML_NOTICE, SC_NODEF_FMT " uses a heartbeat timeout of " - "%u ms, but we use %u ms locally. disconnecting\n", - SC_NODEF_ARGS(sc), - be32_to_cpu(hand->o2hb_heartbeat_timeout_ms), - O2HB_MAX_WRITE_TIMEOUT_MS); + printk(KERN_NOTICE "o2net: " SC_NODEF_FMT " uses a heartbeat " + "timeout of %u ms, but we use %u ms locally. " + "Disconnecting.\n", SC_NODEF_ARGS(sc), + be32_to_cpu(hand->o2hb_heartbeat_timeout_ms), + O2HB_MAX_WRITE_TIMEOUT_MS); o2net_ensure_shutdown(nn, sc, -ENOTCONN); return -1; } @@ -1539,28 +1539,16 @@ static void o2net_idle_timer(unsigned long data) { struct o2net_sock_container *sc = (struct o2net_sock_container *)data; struct o2net_node *nn = o2net_nn_from_num(sc->sc_node->nd_num); - #ifdef CONFIG_DEBUG_FS - ktime_t now = ktime_get(); + unsigned long msecs = ktime_to_ms(ktime_get()) - + ktime_to_ms(sc->sc_tv_timer); +#else + unsigned long msecs = o2net_idle_timeout(); #endif - printk(KERN_NOTICE "o2net: connection to " SC_NODEF_FMT " has been idle for %u.%u " - "seconds, shutting it down.\n", SC_NODEF_ARGS(sc), - o2net_idle_timeout() / 1000, - o2net_idle_timeout() % 1000); - -#ifdef CONFIG_DEBUG_FS - mlog(ML_NOTICE, "Here are some times that might help debug the " - "situation: (Timer: %lld, Now %lld, DataReady %lld, Advance %lld-%lld, " - "Key 0x%08x, Func %u, FuncTime %lld-%lld)\n", - (long long)ktime_to_us(sc->sc_tv_timer), (long long)ktime_to_us(now), - (long long)ktime_to_us(sc->sc_tv_data_ready), - (long long)ktime_to_us(sc->sc_tv_advance_start), - (long long)ktime_to_us(sc->sc_tv_advance_stop), - sc->sc_msg_key, sc->sc_msg_type, - (long long)ktime_to_us(sc->sc_tv_func_start), - (long long)ktime_to_us(sc->sc_tv_func_stop)); -#endif + printk(KERN_NOTICE "o2net: Connection to " SC_NODEF_FMT " has been " + "idle for %lu.%lu secs, shutting it down.\n", SC_NODEF_ARGS(sc), + msecs / 1000, msecs % 1000); /* * Initialize the nn_timeout so that the next connection attempt @@ -1693,8 +1681,8 @@ static void o2net_start_connect(struct work_struct *work) out: if (ret) { - mlog(ML_NOTICE, "connect attempt to " SC_NODEF_FMT " failed " - "with errno %d\n", SC_NODEF_ARGS(sc), ret); + printk(KERN_NOTICE "o2net: Connect attempt to " SC_NODEF_FMT + " failed with errno %d\n", SC_NODEF_ARGS(sc), ret); /* 0 err so that another will be queued and attempted * from set_nn_state */ if (sc) @@ -1717,8 +1705,8 @@ static void o2net_connect_expired(struct work_struct *work) spin_lock(&nn->nn_lock); if (!nn->nn_sc_valid) { - mlog(ML_ERROR, "no connection established with node %u after " - "%u.%u seconds, giving up and returning errors.\n", + printk(KERN_NOTICE "o2net: No connection established with " + "node %u after %u.%u seconds, giving up.\n", o2net_num_from_nn(nn), o2net_idle_timeout() / 1000, o2net_idle_timeout() % 1000); @@ -1861,21 +1849,21 @@ static int o2net_accept_one(struct socket *sock) node = o2nm_get_node_by_ip(sin.sin_addr.s_addr); if (node == NULL) { - mlog(ML_NOTICE, "attempt to connect from unknown node at %pI4:%d\n", - &sin.sin_addr.s_addr, ntohs(sin.sin_port)); + printk(KERN_NOTICE "o2net: Attempt to connect from unknown " + "node at %pI4:%d\n", &sin.sin_addr.s_addr, + ntohs(sin.sin_port)); ret = -EINVAL; goto out; } if (o2nm_this_node() >= node->nd_num) { local_node = o2nm_get_node_by_num(o2nm_this_node()); - mlog(ML_NOTICE, "unexpected connect attempt seen at node '%s' (" - "%u, %pI4:%d) from node '%s' (%u, %pI4:%d)\n", - local_node->nd_name, local_node->nd_num, - &(local_node->nd_ipv4_address), - ntohs(local_node->nd_ipv4_port), - node->nd_name, node->nd_num, &sin.sin_addr.s_addr, - ntohs(sin.sin_port)); + printk(KERN_NOTICE "o2net: Unexpected connect attempt seen " + "at node '%s' (%u, %pI4:%d) from node '%s' (%u, " + "%pI4:%d)\n", local_node->nd_name, local_node->nd_num, + &(local_node->nd_ipv4_address), + ntohs(local_node->nd_ipv4_port), node->nd_name, + node->nd_num, &sin.sin_addr.s_addr, ntohs(sin.sin_port)); ret = -EINVAL; goto out; } @@ -1900,10 +1888,10 @@ static int o2net_accept_one(struct socket *sock) ret = 0; spin_unlock(&nn->nn_lock); if (ret) { - mlog(ML_NOTICE, "attempt to connect from node '%s' at " - "%pI4:%d but it already has an open connection\n", - node->nd_name, &sin.sin_addr.s_addr, - ntohs(sin.sin_port)); + printk(KERN_NOTICE "o2net: Attempt to connect from node '%s' " + "at %pI4:%d but it already has an open connection\n", + node->nd_name, &sin.sin_addr.s_addr, + ntohs(sin.sin_port)); goto out; } @@ -1983,7 +1971,7 @@ static int o2net_open_listening_sock(__be32 addr, __be16 port) ret = sock_create(PF_INET, SOCK_STREAM, IPPROTO_TCP, &sock); if (ret < 0) { - mlog(ML_ERROR, "unable to create socket, ret=%d\n", ret); + printk(KERN_ERR "o2net: Error %d while creating socket\n", ret); goto out; } @@ -2000,16 +1988,15 @@ static int o2net_open_listening_sock(__be32 addr, __be16 port) sock->sk->sk_reuse = 1; ret = sock->ops->bind(sock, (struct sockaddr *)&sin, sizeof(sin)); if (ret < 0) { - mlog(ML_ERROR, "unable to bind socket at %pI4:%u, " - "ret=%d\n", &addr, ntohs(port), ret); + printk(KERN_ERR "o2net: Error %d while binding socket at " + "%pI4:%u\n", ret, &addr, ntohs(port)); goto out; } ret = sock->ops->listen(sock, 64); - if (ret < 0) { - mlog(ML_ERROR, "unable to listen on %pI4:%u, ret=%d\n", - &addr, ntohs(port), ret); - } + if (ret < 0) + printk(KERN_ERR "o2net: Error %d while listening on %pI4:%u\n", + ret, &addr, ntohs(port)); out: if (ret) { -- cgit v0.10.2 From 8decab3c8dadcdf4f54ffb30df6e6f67b398b6e0 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Sun, 24 Jul 2011 10:23:54 -0700 Subject: ocfs2/dlm: Clean up messages in o2dlm o2dlm messages needed a facelift. Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/dlm/dlmdomain.c b/fs/ocfs2/dlm/dlmdomain.c index 6ed6b95..ce225fb 100644 --- a/fs/ocfs2/dlm/dlmdomain.c +++ b/fs/ocfs2/dlm/dlmdomain.c @@ -539,17 +539,17 @@ again: static void __dlm_print_nodes(struct dlm_ctxt *dlm) { - int node = -1; + int node = -1, num = 0; assert_spin_locked(&dlm->spinlock); - printk(KERN_NOTICE "o2dlm: Nodes in domain %s: ", dlm->name); - + printk("( "); while ((node = find_next_bit(dlm->domain_map, O2NM_MAX_NODES, node + 1)) < O2NM_MAX_NODES) { printk("%d ", node); + ++num; } - printk("\n"); + printk(") %u nodes\n", num); } static int dlm_exit_domain_handler(struct o2net_msg *msg, u32 len, void *data, @@ -566,11 +566,10 @@ static int dlm_exit_domain_handler(struct o2net_msg *msg, u32 len, void *data, node = exit_msg->node_idx; - printk(KERN_NOTICE "o2dlm: Node %u leaves domain %s\n", node, dlm->name); - spin_lock(&dlm->spinlock); clear_bit(node, dlm->domain_map); clear_bit(node, dlm->exit_domain_map); + printk(KERN_NOTICE "o2dlm: Node %u leaves domain %s ", node, dlm->name); __dlm_print_nodes(dlm); /* notify anything attached to the heartbeat events */ @@ -755,6 +754,7 @@ void dlm_unregister_domain(struct dlm_ctxt *dlm) dlm_mark_domain_leaving(dlm); dlm_leave_domain(dlm); + printk(KERN_NOTICE "o2dlm: Leaving domain %s\n", dlm->name); dlm_force_free_mles(dlm); dlm_complete_dlm_shutdown(dlm); } @@ -970,7 +970,7 @@ static int dlm_assert_joined_handler(struct o2net_msg *msg, u32 len, void *data, clear_bit(assert->node_idx, dlm->exit_domain_map); __dlm_set_joining_node(dlm, DLM_LOCK_RES_OWNER_UNKNOWN); - printk(KERN_NOTICE "o2dlm: Node %u joins domain %s\n", + printk(KERN_NOTICE "o2dlm: Node %u joins domain %s ", assert->node_idx, dlm->name); __dlm_print_nodes(dlm); @@ -1701,8 +1701,10 @@ static int dlm_try_to_join_domain(struct dlm_ctxt *dlm) bail: spin_lock(&dlm->spinlock); __dlm_set_joining_node(dlm, DLM_LOCK_RES_OWNER_UNKNOWN); - if (!status) + if (!status) { + printk(KERN_NOTICE "o2dlm: Joining domain %s ", dlm->name); __dlm_print_nodes(dlm); + } spin_unlock(&dlm->spinlock); if (ctxt) { diff --git a/fs/ocfs2/dlm/dlmlock.c b/fs/ocfs2/dlm/dlmlock.c index 8d39e0fd6..c7f3e22 100644 --- a/fs/ocfs2/dlm/dlmlock.c +++ b/fs/ocfs2/dlm/dlmlock.c @@ -319,27 +319,23 @@ static enum dlm_status dlm_send_remote_lock_request(struct dlm_ctxt *dlm, tmpret = o2net_send_message(DLM_CREATE_LOCK_MSG, dlm->key, &create, sizeof(create), res->owner, &status); if (tmpret >= 0) { - // successfully sent and received - ret = status; // this is already a dlm_status + ret = status; if (ret == DLM_REJECTED) { - mlog(ML_ERROR, "%s:%.*s: BUG. this is a stale lockres " - "no longer owned by %u. that node is coming back " - "up currently.\n", dlm->name, create.namelen, + mlog(ML_ERROR, "%s: res %.*s, Stale lockres no longer " + "owned by node %u. That node is coming back up " + "currently.\n", dlm->name, create.namelen, create.name, res->owner); dlm_print_one_lock_resource(res); BUG(); } } else { - mlog(ML_ERROR, "Error %d when sending message %u (key 0x%x) to " - "node %u\n", tmpret, DLM_CREATE_LOCK_MSG, dlm->key, - res->owner); - if (dlm_is_host_down(tmpret)) { + mlog(ML_ERROR, "%s: res %.*s, Error %d send CREATE LOCK to " + "node %u\n", dlm->name, create.namelen, create.name, + tmpret, res->owner); + if (dlm_is_host_down(tmpret)) ret = DLM_RECOVERING; - mlog(0, "node %u died so returning DLM_RECOVERING " - "from lock message!\n", res->owner); - } else { + else ret = dlm_err_to_dlm_status(tmpret); - } } return ret; diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c index 11eefb8..9f3b093 100644 --- a/fs/ocfs2/dlm/dlmmaster.c +++ b/fs/ocfs2/dlm/dlmmaster.c @@ -829,8 +829,8 @@ lookup: * but they might own this lockres. wait on them. */ bit = find_next_bit(dlm->recovery_map, O2NM_MAX_NODES, 0); if (bit < O2NM_MAX_NODES) { - mlog(ML_NOTICE, "%s:%.*s: at least one node (%d) to " - "recover before lock mastery can begin\n", + mlog(0, "%s: res %.*s, At least one node (%d) " + "to recover before lock mastery can begin\n", dlm->name, namelen, (char *)lockid, bit); wait_on_recovery = 1; } @@ -864,8 +864,8 @@ redo_request: * dlm spinlock would be detectable be a change on the mle, * so we only need to clear out the recovery map once. */ if (dlm_is_recovery_lock(lockid, namelen)) { - mlog(ML_NOTICE, "%s: recovery map is not empty, but " - "must master $RECOVERY lock now\n", dlm->name); + mlog(0, "%s: Recovery map is not empty, but must " + "master $RECOVERY lock now\n", dlm->name); if (!dlm_pre_master_reco_lockres(dlm, res)) wait_on_recovery = 0; else { @@ -883,8 +883,8 @@ redo_request: spin_lock(&dlm->spinlock); bit = find_next_bit(dlm->recovery_map, O2NM_MAX_NODES, 0); if (bit < O2NM_MAX_NODES) { - mlog(ML_NOTICE, "%s:%.*s: at least one node (%d) to " - "recover before lock mastery can begin\n", + mlog(0, "%s: res %.*s, At least one node (%d) " + "to recover before lock mastery can begin\n", dlm->name, namelen, (char *)lockid, bit); wait_on_recovery = 1; } else @@ -913,8 +913,8 @@ redo_request: * yet, keep going until it does. this is how the * master will know that asserts are needed back to * the lower nodes. */ - mlog(0, "%s:%.*s: requests only up to %u but master " - "is %u, keep going\n", dlm->name, namelen, + mlog(0, "%s: res %.*s, Requests only up to %u but " + "master is %u, keep going\n", dlm->name, namelen, lockid, nodenum, mle->master); } } @@ -924,13 +924,12 @@ wait: ret = dlm_wait_for_lock_mastery(dlm, res, mle, &blocked); if (ret < 0) { wait_on_recovery = 1; - mlog(0, "%s:%.*s: node map changed, redo the " - "master request now, blocked=%d\n", - dlm->name, res->lockname.len, + mlog(0, "%s: res %.*s, Node map changed, redo the master " + "request now, blocked=%d\n", dlm->name, res->lockname.len, res->lockname.name, blocked); if (++tries > 20) { - mlog(ML_ERROR, "%s:%.*s: spinning on " - "dlm_wait_for_lock_mastery, blocked=%d\n", + mlog(ML_ERROR, "%s: res %.*s, Spinning on " + "dlm_wait_for_lock_mastery, blocked = %d\n", dlm->name, res->lockname.len, res->lockname.name, blocked); dlm_print_one_lock_resource(res); @@ -940,7 +939,8 @@ wait: goto redo_request; } - mlog(0, "lockres mastered by %u\n", res->owner); + mlog(0, "%s: res %.*s, Mastered by %u\n", dlm->name, res->lockname.len, + res->lockname.name, res->owner); /* make sure we never continue without this */ BUG_ON(res->owner == O2NM_MAX_NODES); @@ -2187,8 +2187,6 @@ int dlm_drop_lockres_ref(struct dlm_ctxt *dlm, struct dlm_lock_resource *res) namelen = res->lockname.len; BUG_ON(namelen > O2NM_MAX_NAME_LEN); - mlog(0, "%s:%.*s: sending deref to %d\n", - dlm->name, namelen, lockname, res->owner); memset(&deref, 0, sizeof(deref)); deref.node_idx = dlm->node_num; deref.namelen = namelen; @@ -2197,14 +2195,12 @@ int dlm_drop_lockres_ref(struct dlm_ctxt *dlm, struct dlm_lock_resource *res) ret = o2net_send_message(DLM_DEREF_LOCKRES_MSG, dlm->key, &deref, sizeof(deref), res->owner, &r); if (ret < 0) - mlog(ML_ERROR, "Error %d when sending message %u (key 0x%x) to " - "node %u\n", ret, DLM_DEREF_LOCKRES_MSG, dlm->key, - res->owner); + mlog(ML_ERROR, "%s: res %.*s, error %d send DEREF to node %u\n", + dlm->name, namelen, lockname, ret, res->owner); else if (r < 0) { /* BAD. other node says I did not have a ref. */ - mlog(ML_ERROR,"while dropping ref on %s:%.*s " - "(master=%u) got %d.\n", dlm->name, namelen, - lockname, res->owner, r); + mlog(ML_ERROR, "%s: res %.*s, DEREF to node %u got %d\n", + dlm->name, namelen, lockname, res->owner, r); dlm_print_one_lock_resource(res); BUG(); } @@ -2916,9 +2912,9 @@ static int dlm_do_migrate_request(struct dlm_ctxt *dlm, &migrate, sizeof(migrate), nodenum, &status); if (ret < 0) { - mlog(ML_ERROR, "Error %d when sending message %u (key " - "0x%x) to node %u\n", ret, DLM_MIGRATE_REQUEST_MSG, - dlm->key, nodenum); + mlog(ML_ERROR, "%s: res %.*s, Error %d send " + "MIGRATE_REQUEST to node %u\n", dlm->name, + migrate.namelen, migrate.name, ret, nodenum); if (!dlm_is_host_down(ret)) { mlog(ML_ERROR, "unhandled error=%d!\n", ret); BUG(); diff --git a/fs/ocfs2/dlm/dlmrecovery.c b/fs/ocfs2/dlm/dlmrecovery.c index 7efab6d..a3c312c 100644 --- a/fs/ocfs2/dlm/dlmrecovery.c +++ b/fs/ocfs2/dlm/dlmrecovery.c @@ -430,6 +430,8 @@ static void dlm_begin_recovery(struct dlm_ctxt *dlm) { spin_lock(&dlm->spinlock); BUG_ON(dlm->reco.state & DLM_RECO_STATE_ACTIVE); + printk(KERN_NOTICE "o2dlm: Begin recovery on domain %s for node %u\n", + dlm->name, dlm->reco.dead_node); dlm->reco.state |= DLM_RECO_STATE_ACTIVE; spin_unlock(&dlm->spinlock); } @@ -440,9 +442,18 @@ static void dlm_end_recovery(struct dlm_ctxt *dlm) BUG_ON(!(dlm->reco.state & DLM_RECO_STATE_ACTIVE)); dlm->reco.state &= ~DLM_RECO_STATE_ACTIVE; spin_unlock(&dlm->spinlock); + printk(KERN_NOTICE "o2dlm: End recovery on domain %s\n", dlm->name); wake_up(&dlm->reco.event); } +static void dlm_print_recovery_master(struct dlm_ctxt *dlm) +{ + printk(KERN_NOTICE "o2dlm: Node %u (%s) is the Recovery Master for the " + "dead node %u in domain %s\n", dlm->reco.new_master, + (dlm->node_num == dlm->reco.new_master ? "me" : "he"), + dlm->reco.dead_node, dlm->name); +} + static int dlm_do_recovery(struct dlm_ctxt *dlm) { int status = 0; @@ -505,9 +516,8 @@ static int dlm_do_recovery(struct dlm_ctxt *dlm) } mlog(0, "another node will master this recovery session.\n"); } - mlog(0, "dlm=%s (%d), new_master=%u, this node=%u, dead_node=%u\n", - dlm->name, task_pid_nr(dlm->dlm_reco_thread_task), dlm->reco.new_master, - dlm->node_num, dlm->reco.dead_node); + + dlm_print_recovery_master(dlm); /* it is safe to start everything back up here * because all of the dead node's lock resources @@ -518,15 +528,13 @@ static int dlm_do_recovery(struct dlm_ctxt *dlm) return 0; master_here: - mlog(ML_NOTICE, "(%d) Node %u is the Recovery Master for the Dead Node " - "%u for Domain %s\n", task_pid_nr(dlm->dlm_reco_thread_task), - dlm->node_num, dlm->reco.dead_node, dlm->name); + dlm_print_recovery_master(dlm); status = dlm_remaster_locks(dlm, dlm->reco.dead_node); if (status < 0) { /* we should never hit this anymore */ - mlog(ML_ERROR, "error %d remastering locks for node %u, " - "retrying.\n", status, dlm->reco.dead_node); + mlog(ML_ERROR, "%s: Error %d remastering locks for node %u, " + "retrying.\n", dlm->name, status, dlm->reco.dead_node); /* yield a bit to allow any final network messages * to get handled on remaining nodes */ msleep(100); @@ -567,7 +575,7 @@ static int dlm_remaster_locks(struct dlm_ctxt *dlm, u8 dead_node) BUG_ON(ndata->state != DLM_RECO_NODE_DATA_INIT); ndata->state = DLM_RECO_NODE_DATA_REQUESTING; - mlog(0, "requesting lock info from node %u\n", + mlog(0, "%s: Requesting lock info from node %u\n", dlm->name, ndata->node_num); if (ndata->node_num == dlm->node_num) { @@ -640,7 +648,7 @@ static int dlm_remaster_locks(struct dlm_ctxt *dlm, u8 dead_node) spin_unlock(&dlm_reco_state_lock); } - mlog(0, "done requesting all lock info\n"); + mlog(0, "%s: Done requesting all lock info\n", dlm->name); /* nodes should be sending reco data now * just need to wait */ @@ -802,10 +810,9 @@ static int dlm_request_all_locks(struct dlm_ctxt *dlm, u8 request_from, /* negative status is handled by caller */ if (ret < 0) - mlog(ML_ERROR, "Error %d when sending message %u (key " - "0x%x) to node %u\n", ret, DLM_LOCK_REQUEST_MSG, - dlm->key, request_from); - + mlog(ML_ERROR, "%s: Error %d send LOCK_REQUEST to node %u " + "to recover dead node %u\n", dlm->name, ret, + request_from, dead_node); // return from here, then // sleep until all received or error return ret; @@ -956,9 +963,9 @@ static int dlm_send_all_done_msg(struct dlm_ctxt *dlm, u8 dead_node, u8 send_to) ret = o2net_send_message(DLM_RECO_DATA_DONE_MSG, dlm->key, &done_msg, sizeof(done_msg), send_to, &tmpret); if (ret < 0) { - mlog(ML_ERROR, "Error %d when sending message %u (key " - "0x%x) to node %u\n", ret, DLM_RECO_DATA_DONE_MSG, - dlm->key, send_to); + mlog(ML_ERROR, "%s: Error %d send RECO_DATA_DONE to node %u " + "to recover dead node %u\n", dlm->name, ret, send_to, + dead_node); if (!dlm_is_host_down(ret)) { BUG(); } @@ -1127,9 +1134,11 @@ static int dlm_send_mig_lockres_msg(struct dlm_ctxt *dlm, if (ret < 0) { /* XXX: negative status is not handled. * this will end up killing this node. */ - mlog(ML_ERROR, "Error %d when sending message %u (key " - "0x%x) to node %u\n", ret, DLM_MIG_LOCKRES_MSG, - dlm->key, send_to); + mlog(ML_ERROR, "%s: res %.*s, Error %d send MIG_LOCKRES to " + "node %u (%s)\n", dlm->name, mres->lockname_len, + mres->lockname, ret, send_to, + (orig_flags & DLM_MRES_MIGRATION ? + "migration" : "recovery")); } else { /* might get an -ENOMEM back here */ ret = status; @@ -2324,9 +2333,9 @@ static void dlm_do_local_recovery_cleanup(struct dlm_ctxt *dlm, u8 dead_node) dlm_revalidate_lvb(dlm, res, dead_node); if (res->owner == dead_node) { if (res->state & DLM_LOCK_RES_DROPPING_REF) { - mlog(ML_NOTICE, "Ignore %.*s for " + mlog(ML_NOTICE, "%s: res %.*s, Skip " "recovery as it is being freed\n", - res->lockname.len, + dlm->name, res->lockname.len, res->lockname.name); } else dlm_move_lockres_to_recovery_list(dlm, diff --git a/fs/ocfs2/dlm/dlmthread.c b/fs/ocfs2/dlm/dlmthread.c index 1d6d1d2..46faac2 100644 --- a/fs/ocfs2/dlm/dlmthread.c +++ b/fs/ocfs2/dlm/dlmthread.c @@ -185,8 +185,6 @@ static void dlm_purge_lockres(struct dlm_ctxt *dlm, /* clear our bit from the master's refmap, ignore errors */ ret = dlm_drop_lockres_ref(dlm, res); if (ret < 0) { - mlog(ML_ERROR, "%s: deref %.*s failed %d\n", dlm->name, - res->lockname.len, res->lockname.name, ret); if (!dlm_is_host_down(ret)) BUG(); } -- cgit v0.10.2 From 394eb3d38a3ecc549cc34a3040103a9164be516b Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Sun, 24 Jul 2011 10:24:54 -0700 Subject: ocfs2: Clean up messages in stack_o2cb.c o2cb messages needed a facelift. Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/stack_o2cb.c b/fs/ocfs2/stack_o2cb.c index 19965b0..be935d8 100644 --- a/fs/ocfs2/stack_o2cb.c +++ b/fs/ocfs2/stack_o2cb.c @@ -263,8 +263,8 @@ static void o2dlm_eviction_cb(int node_num, void *data) { struct ocfs2_cluster_connection *conn = data; - mlog(ML_NOTICE, "o2dlm has evicted node %d from group %.*s\n", - node_num, conn->cc_namelen, conn->cc_name); + printk(KERN_NOTICE "o2cb: o2dlm has evicted node %d from domain %.*s\n", + node_num, conn->cc_namelen, conn->cc_name); conn->cc_recovery_handler(node_num, conn->cc_recovery_data); } -- cgit v0.10.2 From 0afbba13226fcdbd4327f6b13a42f6efbb8c9caf Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Sun, 24 Jul 2011 10:25:54 -0700 Subject: ocfs2/dlm: Cleanup up dlm_finish_local_lockres_recovery() dlm_finish_local_lockres_recovery() needed a facelift. Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/dlm/dlmrecovery.c b/fs/ocfs2/dlm/dlmrecovery.c index a3c312c..41e74f0 100644 --- a/fs/ocfs2/dlm/dlmrecovery.c +++ b/fs/ocfs2/dlm/dlmrecovery.c @@ -2093,6 +2093,9 @@ static void dlm_finish_local_lockres_recovery(struct dlm_ctxt *dlm, list_for_each_entry_safe(res, next, &dlm->reco.resources, recovering) { if (res->owner == dead_node) { + mlog(0, "%s: res %.*s, Changing owner from %u to %u\n", + dlm->name, res->lockname.len, res->lockname.name, + res->owner, new_master); list_del_init(&res->recovering); spin_lock(&res->spinlock); /* new_master has our reference from @@ -2114,40 +2117,30 @@ static void dlm_finish_local_lockres_recovery(struct dlm_ctxt *dlm, for (i = 0; i < DLM_HASH_BUCKETS; i++) { bucket = dlm_lockres_hash(dlm, i); hlist_for_each_entry(res, hash_iter, bucket, hash_node) { - if (res->state & DLM_LOCK_RES_RECOVERING) { - if (res->owner == dead_node) { - mlog(0, "(this=%u) res %.*s owner=%u " - "was not on recovering list, but " - "clearing state anyway\n", - dlm->node_num, res->lockname.len, - res->lockname.name, new_master); - } else if (res->owner == dlm->node_num) { - mlog(0, "(this=%u) res %.*s owner=%u " - "was not on recovering list, " - "owner is THIS node, clearing\n", - dlm->node_num, res->lockname.len, - res->lockname.name, new_master); - } else - continue; + if (!(res->state & DLM_LOCK_RES_RECOVERING)) + continue; - if (!list_empty(&res->recovering)) { - mlog(0, "%s:%.*s: lockres was " - "marked RECOVERING, owner=%u\n", - dlm->name, res->lockname.len, - res->lockname.name, res->owner); - list_del_init(&res->recovering); - dlm_lockres_put(res); - } - spin_lock(&res->spinlock); - /* new_master has our reference from - * the lock state sent during recovery */ - dlm_change_lockres_owner(dlm, res, new_master); - res->state &= ~DLM_LOCK_RES_RECOVERING; - if (__dlm_lockres_has_locks(res)) - __dlm_dirty_lockres(dlm, res); - spin_unlock(&res->spinlock); - wake_up(&res->wq); + if (res->owner != dead_node && + res->owner != dlm->node_num) + continue; + + if (!list_empty(&res->recovering)) { + list_del_init(&res->recovering); + dlm_lockres_put(res); } + + /* new_master has our reference from + * the lock state sent during recovery */ + mlog(0, "%s: res %.*s, Changing owner from %u to %u\n", + dlm->name, res->lockname.len, res->lockname.name, + res->owner, new_master); + spin_lock(&res->spinlock); + dlm_change_lockres_owner(dlm, res, new_master); + res->state &= ~DLM_LOCK_RES_RECOVERING; + if (__dlm_lockres_has_locks(res)) + __dlm_dirty_lockres(dlm, res); + spin_unlock(&res->spinlock); + wake_up(&res->wq); } } } -- cgit v0.10.2 From 8d400b81cc83b171ff872587723a37eb7fae9abe Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Sun, 24 Jul 2011 10:26:54 -0700 Subject: ocfs2/dlm: Clean up refmap helpers Patch cleans up helpers that set/clear refmap bits and grab/drop inflight lock ref counts. Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/dlm/dlmcommon.h b/fs/ocfs2/dlm/dlmcommon.h index d602abb..4a5d580 100644 --- a/fs/ocfs2/dlm/dlmcommon.h +++ b/fs/ocfs2/dlm/dlmcommon.h @@ -902,46 +902,15 @@ struct dlm_lock_resource *dlm_new_lockres(struct dlm_ctxt *dlm, const char *name, unsigned int namelen); -#define dlm_lockres_set_refmap_bit(bit,res) \ - __dlm_lockres_set_refmap_bit(bit,res,__FILE__,__LINE__) -#define dlm_lockres_clear_refmap_bit(bit,res) \ - __dlm_lockres_clear_refmap_bit(bit,res,__FILE__,__LINE__) - -static inline void __dlm_lockres_set_refmap_bit(int bit, - struct dlm_lock_resource *res, - const char *file, - int line) -{ - //printk("%s:%d:%.*s: setting bit %d\n", file, line, - // res->lockname.len, res->lockname.name, bit); - set_bit(bit, res->refmap); -} - -static inline void __dlm_lockres_clear_refmap_bit(int bit, - struct dlm_lock_resource *res, - const char *file, - int line) -{ - //printk("%s:%d:%.*s: clearing bit %d\n", file, line, - // res->lockname.len, res->lockname.name, bit); - clear_bit(bit, res->refmap); -} - -void __dlm_lockres_drop_inflight_ref(struct dlm_ctxt *dlm, - struct dlm_lock_resource *res, - const char *file, - int line); -void __dlm_lockres_grab_inflight_ref(struct dlm_ctxt *dlm, - struct dlm_lock_resource *res, - int new_lockres, - const char *file, - int line); -#define dlm_lockres_drop_inflight_ref(d,r) \ - __dlm_lockres_drop_inflight_ref(d,r,__FILE__,__LINE__) -#define dlm_lockres_grab_inflight_ref(d,r) \ - __dlm_lockres_grab_inflight_ref(d,r,0,__FILE__,__LINE__) -#define dlm_lockres_grab_inflight_ref_new(d,r) \ - __dlm_lockres_grab_inflight_ref(d,r,1,__FILE__,__LINE__) +void dlm_lockres_set_refmap_bit(struct dlm_ctxt *dlm, + struct dlm_lock_resource *res, int bit); +void dlm_lockres_clear_refmap_bit(struct dlm_ctxt *dlm, + struct dlm_lock_resource *res, int bit); + +void dlm_lockres_drop_inflight_ref(struct dlm_ctxt *dlm, + struct dlm_lock_resource *res); +void dlm_lockres_grab_inflight_ref(struct dlm_ctxt *dlm, + struct dlm_lock_resource *res); void dlm_queue_ast(struct dlm_ctxt *dlm, struct dlm_lock *lock); void dlm_queue_bast(struct dlm_ctxt *dlm, struct dlm_lock *lock); diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c index 9f3b093..11e446f 100644 --- a/fs/ocfs2/dlm/dlmmaster.c +++ b/fs/ocfs2/dlm/dlmmaster.c @@ -631,39 +631,58 @@ error: return NULL; } -void __dlm_lockres_grab_inflight_ref(struct dlm_ctxt *dlm, - struct dlm_lock_resource *res, - int new_lockres, - const char *file, - int line) +void dlm_lockres_set_refmap_bit(struct dlm_ctxt *dlm, + struct dlm_lock_resource *res, int bit) { - if (!new_lockres) - assert_spin_locked(&res->spinlock); + assert_spin_locked(&res->spinlock); + + mlog(0, "res %.*s, set node %u, %ps()\n", res->lockname.len, + res->lockname.name, bit, __builtin_return_address(0)); + + set_bit(bit, res->refmap); +} + +void dlm_lockres_clear_refmap_bit(struct dlm_ctxt *dlm, + struct dlm_lock_resource *res, int bit) +{ + assert_spin_locked(&res->spinlock); + + mlog(0, "res %.*s, clr node %u, %ps()\n", res->lockname.len, + res->lockname.name, bit, __builtin_return_address(0)); + + clear_bit(bit, res->refmap); +} + + +void dlm_lockres_grab_inflight_ref(struct dlm_ctxt *dlm, + struct dlm_lock_resource *res) +{ + assert_spin_locked(&res->spinlock); if (!test_bit(dlm->node_num, res->refmap)) { BUG_ON(res->inflight_locks != 0); - dlm_lockres_set_refmap_bit(dlm->node_num, res); + dlm_lockres_set_refmap_bit(dlm, res, dlm->node_num); } res->inflight_locks++; - mlog(0, "%s:%.*s: inflight++: now %u\n", - dlm->name, res->lockname.len, res->lockname.name, - res->inflight_locks); + mlog(0, "%s: res %.*s, inflight++: now %u, %ps()\n", dlm->name, + res->lockname.len, res->lockname.name, res->inflight_locks, + __builtin_return_address(0)); } -void __dlm_lockres_drop_inflight_ref(struct dlm_ctxt *dlm, - struct dlm_lock_resource *res, - const char *file, - int line) +void dlm_lockres_drop_inflight_ref(struct dlm_ctxt *dlm, + struct dlm_lock_resource *res) { assert_spin_locked(&res->spinlock); BUG_ON(res->inflight_locks == 0); + res->inflight_locks--; - mlog(0, "%s:%.*s: inflight--: now %u\n", - dlm->name, res->lockname.len, res->lockname.name, - res->inflight_locks); + mlog(0, "%s: res %.*s, inflight--: now %u, %ps()\n", dlm->name, + res->lockname.len, res->lockname.name, res->inflight_locks, + __builtin_return_address(0)); + if (res->inflight_locks == 0) - dlm_lockres_clear_refmap_bit(dlm->node_num, res); + dlm_lockres_clear_refmap_bit(dlm, res, dlm->node_num); wake_up(&res->wq); } @@ -843,8 +862,10 @@ lookup: /* finally add the lockres to its hash bucket */ __dlm_insert_lockres(dlm, res); - /* since this lockres is new it doesn't not require the spinlock */ - dlm_lockres_grab_inflight_ref_new(dlm, res); + + spin_lock(&res->spinlock); + dlm_lockres_grab_inflight_ref(dlm, res); + spin_unlock(&res->spinlock); /* if this node does not become the master make sure to drop * this inflight reference below */ @@ -1426,9 +1447,7 @@ way_up_top: } if (res->owner == dlm->node_num) { - mlog(0, "%s:%.*s: setting bit %u in refmap\n", - dlm->name, namelen, name, request->node_idx); - dlm_lockres_set_refmap_bit(request->node_idx, res); + dlm_lockres_set_refmap_bit(dlm, res, request->node_idx); spin_unlock(&res->spinlock); response = DLM_MASTER_RESP_YES; if (mle) @@ -1493,10 +1512,8 @@ way_up_top: * go back and clean the mles on any * other nodes */ dispatch_assert = 1; - dlm_lockres_set_refmap_bit(request->node_idx, res); - mlog(0, "%s:%.*s: setting bit %u in refmap\n", - dlm->name, namelen, name, - request->node_idx); + dlm_lockres_set_refmap_bit(dlm, res, + request->node_idx); } else response = DLM_MASTER_RESP_NO; } else { @@ -1702,7 +1719,7 @@ again: "lockres, set the bit in the refmap\n", namelen, lockname, to); spin_lock(&res->spinlock); - dlm_lockres_set_refmap_bit(to, res); + dlm_lockres_set_refmap_bit(dlm, res, to); spin_unlock(&res->spinlock); } } @@ -2256,7 +2273,7 @@ int dlm_deref_lockres_handler(struct o2net_msg *msg, u32 len, void *data, else { BUG_ON(res->state & DLM_LOCK_RES_DROPPING_REF); if (test_bit(node, res->refmap)) { - dlm_lockres_clear_refmap_bit(node, res); + dlm_lockres_clear_refmap_bit(dlm, res, node); cleared = 1; } } @@ -2316,7 +2333,7 @@ static void dlm_deref_lockres_worker(struct dlm_work_item *item, void *data) BUG_ON(res->state & DLM_LOCK_RES_DROPPING_REF); if (test_bit(node, res->refmap)) { __dlm_wait_on_lockres_flags(res, DLM_LOCK_RES_SETREF_INPROG); - dlm_lockres_clear_refmap_bit(node, res); + dlm_lockres_clear_refmap_bit(dlm, res, node); cleared = 1; } spin_unlock(&res->spinlock); @@ -2798,7 +2815,8 @@ static void dlm_remove_nonlocal_locks(struct dlm_ctxt *dlm, BUG_ON(!list_empty(&lock->bast_list)); BUG_ON(lock->ast_pending); BUG_ON(lock->bast_pending); - dlm_lockres_clear_refmap_bit(lock->ml.node, res); + dlm_lockres_clear_refmap_bit(dlm, res, + lock->ml.node); list_del_init(&lock->list); dlm_lock_put(lock); /* In a normal unlock, we would have added a @@ -2819,7 +2837,7 @@ static void dlm_remove_nonlocal_locks(struct dlm_ctxt *dlm, mlog(0, "%s:%.*s: node %u had a ref to this " "migrating lockres, clearing\n", dlm->name, res->lockname.len, res->lockname.name, bit); - dlm_lockres_clear_refmap_bit(bit, res); + dlm_lockres_clear_refmap_bit(dlm, res, bit); } bit++; } @@ -2933,7 +2951,7 @@ static int dlm_do_migrate_request(struct dlm_ctxt *dlm, dlm->name, res->lockname.len, res->lockname.name, nodenum); spin_lock(&res->spinlock); - dlm_lockres_set_refmap_bit(nodenum, res); + dlm_lockres_set_refmap_bit(dlm, res, nodenum); spin_unlock(&res->spinlock); } } @@ -3267,7 +3285,7 @@ int dlm_finish_migration(struct dlm_ctxt *dlm, struct dlm_lock_resource *res, * mastery reference here since old_master will briefly have * a reference after the migration completes */ spin_lock(&res->spinlock); - dlm_lockres_set_refmap_bit(old_master, res); + dlm_lockres_set_refmap_bit(dlm, res, old_master); spin_unlock(&res->spinlock); mlog(0, "now time to do a migrate request to other nodes\n"); diff --git a/fs/ocfs2/dlm/dlmrecovery.c b/fs/ocfs2/dlm/dlmrecovery.c index 41e74f0..f1a3aa8 100644 --- a/fs/ocfs2/dlm/dlmrecovery.c +++ b/fs/ocfs2/dlm/dlmrecovery.c @@ -1776,7 +1776,7 @@ static int dlm_process_recovery_data(struct dlm_ctxt *dlm, dlm->name, mres->lockname_len, mres->lockname, from); spin_lock(&res->spinlock); - dlm_lockres_set_refmap_bit(from, res); + dlm_lockres_set_refmap_bit(dlm, res, from); spin_unlock(&res->spinlock); added++; break; @@ -1974,7 +1974,7 @@ skip_lvb: mlog(0, "%s:%.*s: added lock for node %u, " "setting refmap bit\n", dlm->name, res->lockname.len, res->lockname.name, ml->node); - dlm_lockres_set_refmap_bit(ml->node, res); + dlm_lockres_set_refmap_bit(dlm, res, ml->node); added++; } spin_unlock(&res->spinlock); @@ -2254,12 +2254,12 @@ static void dlm_free_dead_locks(struct dlm_ctxt *dlm, res->lockname.len, res->lockname.name, freed, dead_node); __dlm_print_one_lock_resource(res); } - dlm_lockres_clear_refmap_bit(dead_node, res); + dlm_lockres_clear_refmap_bit(dlm, res, dead_node); } else if (test_bit(dead_node, res->refmap)) { mlog(0, "%s:%.*s: dead node %u had a ref, but had " "no locks and had not purged before dying\n", dlm->name, res->lockname.len, res->lockname.name, dead_node); - dlm_lockres_clear_refmap_bit(dead_node, res); + dlm_lockres_clear_refmap_bit(dlm, res, dead_node); } /* do not kick thread yet */ -- cgit v0.10.2 From e9f0b6a6233105c188064328c3f15e21942d0241 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Sun, 24 Jul 2011 10:27:54 -0700 Subject: ocfs2/dlm: Trace insert/remove of resource to/from hash Add mlog to trace adding and removing the resource from/to the hash table. Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/dlm/dlmcommon.h b/fs/ocfs2/dlm/dlmcommon.h index 4a5d580..b1748ac 100644 --- a/fs/ocfs2/dlm/dlmcommon.h +++ b/fs/ocfs2/dlm/dlmcommon.h @@ -877,9 +877,8 @@ static inline void dlm_lockres_get(struct dlm_lock_resource *res) kref_get(&res->refs); } void dlm_lockres_put(struct dlm_lock_resource *res); -void __dlm_unhash_lockres(struct dlm_lock_resource *res); -void __dlm_insert_lockres(struct dlm_ctxt *dlm, - struct dlm_lock_resource *res); +void __dlm_unhash_lockres(struct dlm_ctxt *dlm, struct dlm_lock_resource *res); +void __dlm_insert_lockres(struct dlm_ctxt *dlm, struct dlm_lock_resource *res); struct dlm_lock_resource * __dlm_lookup_lockres_full(struct dlm_ctxt *dlm, const char *name, unsigned int len, diff --git a/fs/ocfs2/dlm/dlmdomain.c b/fs/ocfs2/dlm/dlmdomain.c index ce225fb..200d988 100644 --- a/fs/ocfs2/dlm/dlmdomain.c +++ b/fs/ocfs2/dlm/dlmdomain.c @@ -157,16 +157,18 @@ static int dlm_protocol_compare(struct dlm_protocol_version *existing, static void dlm_unregister_domain_handlers(struct dlm_ctxt *dlm); -void __dlm_unhash_lockres(struct dlm_lock_resource *lockres) +void __dlm_unhash_lockres(struct dlm_ctxt *dlm, struct dlm_lock_resource *res) { - if (!hlist_unhashed(&lockres->hash_node)) { - hlist_del_init(&lockres->hash_node); - dlm_lockres_put(lockres); - } + if (hlist_unhashed(&res->hash_node)) + return; + + mlog(0, "%s: Unhash res %.*s\n", dlm->name, res->lockname.len, + res->lockname.name); + hlist_del_init(&res->hash_node); + dlm_lockres_put(res); } -void __dlm_insert_lockres(struct dlm_ctxt *dlm, - struct dlm_lock_resource *res) +void __dlm_insert_lockres(struct dlm_ctxt *dlm, struct dlm_lock_resource *res) { struct hlist_head *bucket; struct qstr *q; @@ -180,6 +182,9 @@ void __dlm_insert_lockres(struct dlm_ctxt *dlm, dlm_lockres_get(res); hlist_add_head(&res->hash_node, bucket); + + mlog(0, "%s: Hash res %.*s\n", dlm->name, res->lockname.len, + res->lockname.name); } struct dlm_lock_resource * __dlm_lookup_lockres_full(struct dlm_ctxt *dlm, diff --git a/fs/ocfs2/dlm/dlmthread.c b/fs/ocfs2/dlm/dlmthread.c index 46faac2..4eff65e 100644 --- a/fs/ocfs2/dlm/dlmthread.c +++ b/fs/ocfs2/dlm/dlmthread.c @@ -207,7 +207,7 @@ static void dlm_purge_lockres(struct dlm_ctxt *dlm, BUG(); } - __dlm_unhash_lockres(res); + __dlm_unhash_lockres(dlm, res); /* lockres is not in the hash now. drop the flag and wake up * any processes waiting in dlm_get_lock_resource. */ -- cgit v0.10.2 From ed8625c6fb93d750ed022db571a8a7b7a6724b3b Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Sun, 24 Jul 2011 10:28:54 -0700 Subject: ocfs2/dlm: Cleanup dlm_wait_for_node_death() and dlm_wait_for_node_recovery() dlm_wait_for_node_death() and dlm_wait_for_node_recovery() needed a facelift. Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/dlm/dlmcommon.h b/fs/ocfs2/dlm/dlmcommon.h index b1748ac..a5952ce 100644 --- a/fs/ocfs2/dlm/dlmcommon.h +++ b/fs/ocfs2/dlm/dlmcommon.h @@ -859,8 +859,8 @@ void dlm_complete_recovery_thread(struct dlm_ctxt *dlm); void dlm_wait_for_recovery(struct dlm_ctxt *dlm); void dlm_kick_recovery_thread(struct dlm_ctxt *dlm); int dlm_is_node_dead(struct dlm_ctxt *dlm, u8 node); -int dlm_wait_for_node_death(struct dlm_ctxt *dlm, u8 node, int timeout); -int dlm_wait_for_node_recovery(struct dlm_ctxt *dlm, u8 node, int timeout); +void dlm_wait_for_node_death(struct dlm_ctxt *dlm, u8 node, int timeout); +void dlm_wait_for_node_recovery(struct dlm_ctxt *dlm, u8 node, int timeout); void dlm_put(struct dlm_ctxt *dlm); struct dlm_ctxt *dlm_grab(struct dlm_ctxt *dlm); diff --git a/fs/ocfs2/dlm/dlmrecovery.c b/fs/ocfs2/dlm/dlmrecovery.c index f1a3aa8..01ebfd0 100644 --- a/fs/ocfs2/dlm/dlmrecovery.c +++ b/fs/ocfs2/dlm/dlmrecovery.c @@ -362,40 +362,38 @@ static int dlm_is_node_recovered(struct dlm_ctxt *dlm, u8 node) } -int dlm_wait_for_node_death(struct dlm_ctxt *dlm, u8 node, int timeout) +void dlm_wait_for_node_death(struct dlm_ctxt *dlm, u8 node, int timeout) { - if (timeout) { - mlog(ML_NOTICE, "%s: waiting %dms for notification of " - "death of node %u\n", dlm->name, timeout, node); + if (dlm_is_node_dead(dlm, node)) + return; + + printk(KERN_NOTICE "o2dlm: Waiting on the death of node %u in " + "domain %s\n", node, dlm->name); + + if (timeout) wait_event_timeout(dlm->dlm_reco_thread_wq, - dlm_is_node_dead(dlm, node), - msecs_to_jiffies(timeout)); - } else { - mlog(ML_NOTICE, "%s: waiting indefinitely for notification " - "of death of node %u\n", dlm->name, node); + dlm_is_node_dead(dlm, node), + msecs_to_jiffies(timeout)); + else wait_event(dlm->dlm_reco_thread_wq, dlm_is_node_dead(dlm, node)); - } - /* for now, return 0 */ - return 0; } -int dlm_wait_for_node_recovery(struct dlm_ctxt *dlm, u8 node, int timeout) +void dlm_wait_for_node_recovery(struct dlm_ctxt *dlm, u8 node, int timeout) { - if (timeout) { - mlog(0, "%s: waiting %dms for notification of " - "recovery of node %u\n", dlm->name, timeout, node); + if (dlm_is_node_recovered(dlm, node)) + return; + + printk(KERN_NOTICE "o2dlm: Waiting on the recovery of node %u in " + "domain %s\n", node, dlm->name); + + if (timeout) wait_event_timeout(dlm->dlm_reco_thread_wq, - dlm_is_node_recovered(dlm, node), - msecs_to_jiffies(timeout)); - } else { - mlog(0, "%s: waiting indefinitely for notification " - "of recovery of node %u\n", dlm->name, node); + dlm_is_node_recovered(dlm, node), + msecs_to_jiffies(timeout)); + else wait_event(dlm->dlm_reco_thread_wq, dlm_is_node_recovered(dlm, node)); - } - /* for now, return 0 */ - return 0; } /* callers of the top-level api calls (dlmlock/dlmunlock) should -- cgit v0.10.2 From ff0a522e7db79625aa27a433467eb94c5e255718 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Sun, 24 Jul 2011 10:29:54 -0700 Subject: ocfs2/dlm: Take inflight reference count for remotely mastered resources too The inflight reference count, in the lock resource, is taken to pin the resource in memory. We take it when a new resource is created and release it after a lock is attached to it. We do this to prevent the resource from getting purged prematurely. Earlier this reference count was being taken for locally mastered resources only. This patch extends the same functionality for remotely mastered ones. We are doing this because the same premature purging could occur for remotely mastered resources if the remote node were to die before completion of the create lock. Fix for Oracle bug#12405575. Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/dlm/dlmlock.c b/fs/ocfs2/dlm/dlmlock.c index c7f3e22..3ef2c1a 100644 --- a/fs/ocfs2/dlm/dlmlock.c +++ b/fs/ocfs2/dlm/dlmlock.c @@ -183,10 +183,6 @@ static enum dlm_status dlmlock_master(struct dlm_ctxt *dlm, kick_thread = 1; } } - /* reduce the inflight count, this may result in the lockres - * being purged below during calc_usage */ - if (lock->ml.node == dlm->node_num) - dlm_lockres_drop_inflight_ref(dlm, res); spin_unlock(&res->spinlock); wake_up(&res->wq); @@ -737,6 +733,14 @@ retry_lock: } } + /* Inflight taken in dlm_get_lock_resource() is dropped here */ + spin_lock(&res->spinlock); + dlm_lockres_drop_inflight_ref(dlm, res); + spin_unlock(&res->spinlock); + + dlm_lockres_calc_usage(dlm, res); + dlm_kick_thread(dlm, res); + if (status != DLM_NORMAL) { lock->lksb->flags &= ~DLM_LKSB_GET_LVB; if (status != DLM_NOTQUEUED) diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c index 11e446f..005261c 100644 --- a/fs/ocfs2/dlm/dlmmaster.c +++ b/fs/ocfs2/dlm/dlmmaster.c @@ -659,11 +659,8 @@ void dlm_lockres_grab_inflight_ref(struct dlm_ctxt *dlm, { assert_spin_locked(&res->spinlock); - if (!test_bit(dlm->node_num, res->refmap)) { - BUG_ON(res->inflight_locks != 0); - dlm_lockres_set_refmap_bit(dlm, res, dlm->node_num); - } res->inflight_locks++; + mlog(0, "%s: res %.*s, inflight++: now %u, %ps()\n", dlm->name, res->lockname.len, res->lockname.name, res->inflight_locks, __builtin_return_address(0)); @@ -677,12 +674,11 @@ void dlm_lockres_drop_inflight_ref(struct dlm_ctxt *dlm, BUG_ON(res->inflight_locks == 0); res->inflight_locks--; + mlog(0, "%s: res %.*s, inflight--: now %u, %ps()\n", dlm->name, res->lockname.len, res->lockname.name, res->inflight_locks, __builtin_return_address(0)); - if (res->inflight_locks == 0) - dlm_lockres_clear_refmap_bit(dlm, res, dlm->node_num); wake_up(&res->wq); } @@ -716,7 +712,6 @@ struct dlm_lock_resource * dlm_get_lock_resource(struct dlm_ctxt *dlm, unsigned int hash; int tries = 0; int bit, wait_on_recovery = 0; - int drop_inflight_if_nonlocal = 0; BUG_ON(!lockid); @@ -728,36 +723,33 @@ lookup: spin_lock(&dlm->spinlock); tmpres = __dlm_lookup_lockres_full(dlm, lockid, namelen, hash); if (tmpres) { - int dropping_ref = 0; - spin_unlock(&dlm->spinlock); - spin_lock(&tmpres->spinlock); - /* We wait for the other thread that is mastering the resource */ + /* Wait on the thread that is mastering the resource */ if (tmpres->owner == DLM_LOCK_RES_OWNER_UNKNOWN) { __dlm_wait_on_lockres(tmpres); BUG_ON(tmpres->owner == DLM_LOCK_RES_OWNER_UNKNOWN); + spin_unlock(&tmpres->spinlock); + dlm_lockres_put(tmpres); + tmpres = NULL; + goto lookup; } - if (tmpres->owner == dlm->node_num) { - BUG_ON(tmpres->state & DLM_LOCK_RES_DROPPING_REF); - dlm_lockres_grab_inflight_ref(dlm, tmpres); - } else if (tmpres->state & DLM_LOCK_RES_DROPPING_REF) - dropping_ref = 1; - spin_unlock(&tmpres->spinlock); - - /* wait until done messaging the master, drop our ref to allow - * the lockres to be purged, start over. */ - if (dropping_ref) { - spin_lock(&tmpres->spinlock); - __dlm_wait_on_lockres_flags(tmpres, DLM_LOCK_RES_DROPPING_REF); + /* Wait on the resource purge to complete before continuing */ + if (tmpres->state & DLM_LOCK_RES_DROPPING_REF) { + BUG_ON(tmpres->owner == dlm->node_num); + __dlm_wait_on_lockres_flags(tmpres, + DLM_LOCK_RES_DROPPING_REF); spin_unlock(&tmpres->spinlock); dlm_lockres_put(tmpres); tmpres = NULL; goto lookup; } - mlog(0, "found in hash!\n"); + /* Grab inflight ref to pin the resource */ + dlm_lockres_grab_inflight_ref(dlm, tmpres); + + spin_unlock(&tmpres->spinlock); if (res) dlm_lockres_put(res); res = tmpres; @@ -863,14 +855,11 @@ lookup: /* finally add the lockres to its hash bucket */ __dlm_insert_lockres(dlm, res); + /* Grab inflight ref to pin the resource */ spin_lock(&res->spinlock); dlm_lockres_grab_inflight_ref(dlm, res); spin_unlock(&res->spinlock); - /* if this node does not become the master make sure to drop - * this inflight reference below */ - drop_inflight_if_nonlocal = 1; - /* get an extra ref on the mle in case this is a BLOCK * if so, the creator of the BLOCK may try to put the last * ref at this time in the assert master handler, so we @@ -973,8 +962,6 @@ wait: wake_waiters: spin_lock(&res->spinlock); - if (res->owner != dlm->node_num && drop_inflight_if_nonlocal) - dlm_lockres_drop_inflight_ref(dlm, res); res->state &= ~DLM_LOCK_RES_IN_PROGRESS; spin_unlock(&res->spinlock); wake_up(&res->wq); diff --git a/fs/ocfs2/dlm/dlmthread.c b/fs/ocfs2/dlm/dlmthread.c index 4eff65e..e73c833 100644 --- a/fs/ocfs2/dlm/dlmthread.c +++ b/fs/ocfs2/dlm/dlmthread.c @@ -94,24 +94,26 @@ int __dlm_lockres_unused(struct dlm_lock_resource *res) { int bit; + assert_spin_locked(&res->spinlock); + if (__dlm_lockres_has_locks(res)) return 0; + /* Locks are in the process of being created */ + if (res->inflight_locks) + return 0; + if (!list_empty(&res->dirty) || res->state & DLM_LOCK_RES_DIRTY) return 0; if (res->state & DLM_LOCK_RES_RECOVERING) return 0; + /* Another node has this resource with this node as the master */ bit = find_next_bit(res->refmap, O2NM_MAX_NODES, 0); if (bit < O2NM_MAX_NODES) return 0; - /* - * since the bit for dlm->node_num is not set, inflight_locks better - * be zero - */ - BUG_ON(res->inflight_locks != 0); return 1; } -- cgit v0.10.2 From a2c0cc1579176bd0808ef7deea456767dfa80217 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Sun, 24 Jul 2011 10:30:54 -0700 Subject: ocfs2/dlm: dlmlock_remote() needs to account for remastery In dlmlock_remote(), we wait for the resource to stop being active before setting the inprogress flag. Active includes recovery, migration, etc. The problem here is that if the resource was being recovered or migrated, the new owner could very well be that node itself (and thus not a remote node). This problem was observed in Oracle bug#12583620. The error messages observed were as follows: dlm_send_remote_lock_request:337 ERROR: Error -40 (ELOOP) when sending message 503 (key 0xd6d8c7) to node 2 dlmlock_remote:271 ERROR: dlm status = DLM_BADARGS dlmlock:751 ERROR: dlm status = DLM_BADARGS Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/dlm/dlmlock.c b/fs/ocfs2/dlm/dlmlock.c index 3ef2c1a..f32fcba 100644 --- a/fs/ocfs2/dlm/dlmlock.c +++ b/fs/ocfs2/dlm/dlmlock.c @@ -227,10 +227,16 @@ static enum dlm_status dlmlock_remote(struct dlm_ctxt *dlm, lock->ml.type, res->lockname.len, res->lockname.name, flags); + /* + * Wait if resource is getting recovered, remastered, etc. + * If the resource was remastered and new owner is self, then exit. + */ spin_lock(&res->spinlock); - - /* will exit this call with spinlock held */ __dlm_wait_on_lockres(res); + if (res->owner == dlm->node_num) { + spin_unlock(&res->spinlock); + return DLM_RECOVERING; + } res->state |= DLM_LOCK_RES_IN_PROGRESS; /* add lock to local (secondary) queue */ @@ -710,18 +716,10 @@ retry_lock: if (status == DLM_RECOVERING || status == DLM_MIGRATING || status == DLM_FORWARD) { - mlog(0, "retrying lock with migration/" - "recovery/in progress\n"); msleep(100); - /* no waiting for dlm_reco_thread */ if (recovery) { if (status != DLM_RECOVERING) goto retry_lock; - - mlog(0, "%s: got RECOVERING " - "for $RECOVERY lock, master " - "was %u\n", dlm->name, - res->owner); /* wait to see the node go down, then * drop down and allow the lockres to * get cleaned up. need to remaster. */ -- cgit v0.10.2 From bb570a5d9e74f71d32751823052db4a97d6a5e7c Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Sun, 24 Jul 2011 10:31:54 -0700 Subject: ocfs2/cluster: Fix output in file elapsed_time_in_ms The o2hb debugfs file, elapsed_time_in_ms, should return values only after the timer is armed atleast once. Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c index 4728a74..a4e855e 100644 --- a/fs/ocfs2/cluster/heartbeat.c +++ b/fs/ocfs2/cluster/heartbeat.c @@ -1198,6 +1198,7 @@ static int o2hb_debug_open(struct inode *inode, struct file *file) struct o2hb_debug_buf *db = inode->i_private; struct o2hb_region *reg; unsigned long map[BITS_TO_LONGS(O2NM_MAX_NODES)]; + unsigned long lts; char *buf = NULL; int i = -1; int out = 0; @@ -1234,9 +1235,11 @@ static int o2hb_debug_open(struct inode *inode, struct file *file) case O2HB_DB_TYPE_REGION_ELAPSED_TIME: reg = (struct o2hb_region *)db->db_data; - out += snprintf(buf + out, PAGE_SIZE - out, "%u\n", - jiffies_to_msecs(jiffies - - reg->hr_last_timeout_start)); + lts = reg->hr_last_timeout_start; + /* If 0, it has never been set before */ + if (lts) + lts = jiffies_to_msecs(jiffies - lts); + out += snprintf(buf + out, PAGE_SIZE - out, "%lu\n", lts); goto done; case O2HB_DB_TYPE_REGION_PINNED: -- cgit v0.10.2 From 3ba169ccec1c5ad0f678e04fd29b990197fdfe79 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Sun, 24 Jul 2011 10:32:54 -0700 Subject: ocfs2/cluster: Add new function o2net_fill_node_map() Patch adds function o2net_fill_node_map() to return the bitmap of nodes that it is connected to. This bitmap is also accessible by the user via the debugfs file, /sys/kernel/debug/o2net/connected_nodes. Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/cluster/netdebug.c b/fs/ocfs2/cluster/netdebug.c index 3a583590..dc45deb 100644 --- a/fs/ocfs2/cluster/netdebug.c +++ b/fs/ocfs2/cluster/netdebug.c @@ -47,6 +47,7 @@ #define SC_DEBUG_NAME "sock_containers" #define NST_DEBUG_NAME "send_tracking" #define STATS_DEBUG_NAME "stats" +#define NODES_DEBUG_NAME "connected_nodes" #define SHOW_SOCK_CONTAINERS 0 #define SHOW_SOCK_STATS 1 @@ -55,6 +56,7 @@ static struct dentry *o2net_dentry; static struct dentry *sc_dentry; static struct dentry *nst_dentry; static struct dentry *stats_dentry; +static struct dentry *nodes_dentry; static DEFINE_SPINLOCK(o2net_debug_lock); @@ -491,53 +493,87 @@ static const struct file_operations sc_seq_fops = { .release = sc_fop_release, }; -int o2net_debugfs_init(void) +static int o2net_fill_bitmap(char *buf, int len) { - o2net_dentry = debugfs_create_dir(O2NET_DEBUG_DIR, NULL); - if (!o2net_dentry) { - mlog_errno(-ENOMEM); - goto bail; - } + unsigned long map[BITS_TO_LONGS(O2NM_MAX_NODES)]; + int i = -1, out = 0; - nst_dentry = debugfs_create_file(NST_DEBUG_NAME, S_IFREG|S_IRUSR, - o2net_dentry, NULL, - &nst_seq_fops); - if (!nst_dentry) { - mlog_errno(-ENOMEM); - goto bail; - } + o2net_fill_node_map(map, sizeof(map)); - sc_dentry = debugfs_create_file(SC_DEBUG_NAME, S_IFREG|S_IRUSR, - o2net_dentry, NULL, - &sc_seq_fops); - if (!sc_dentry) { - mlog_errno(-ENOMEM); - goto bail; - } + while ((i = find_next_bit(map, O2NM_MAX_NODES, i + 1)) < O2NM_MAX_NODES) + out += snprintf(buf + out, PAGE_SIZE - out, "%d ", i); + out += snprintf(buf + out, PAGE_SIZE - out, "\n"); - stats_dentry = debugfs_create_file(STATS_DEBUG_NAME, S_IFREG|S_IRUSR, - o2net_dentry, NULL, - &stats_seq_fops); - if (!stats_dentry) { - mlog_errno(-ENOMEM); - goto bail; - } + return out; +} + +static int nodes_fop_open(struct inode *inode, struct file *file) +{ + char *buf; + + buf = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + i_size_write(inode, o2net_fill_bitmap(buf, PAGE_SIZE)); + + file->private_data = buf; return 0; -bail: - debugfs_remove(stats_dentry); - debugfs_remove(sc_dentry); - debugfs_remove(nst_dentry); - debugfs_remove(o2net_dentry); - return -ENOMEM; } +static int o2net_debug_release(struct inode *inode, struct file *file) +{ + kfree(file->private_data); + return 0; +} + +static ssize_t o2net_debug_read(struct file *file, char __user *buf, + size_t nbytes, loff_t *ppos) +{ + return simple_read_from_buffer(buf, nbytes, ppos, file->private_data, + i_size_read(file->f_mapping->host)); +} + +static const struct file_operations nodes_fops = { + .open = nodes_fop_open, + .release = o2net_debug_release, + .read = o2net_debug_read, + .llseek = generic_file_llseek, +}; + void o2net_debugfs_exit(void) { + debugfs_remove(nodes_dentry); debugfs_remove(stats_dentry); debugfs_remove(sc_dentry); debugfs_remove(nst_dentry); debugfs_remove(o2net_dentry); } +int o2net_debugfs_init(void) +{ + mode_t mode = S_IFREG|S_IRUSR; + + o2net_dentry = debugfs_create_dir(O2NET_DEBUG_DIR, NULL); + if (o2net_dentry) + nst_dentry = debugfs_create_file(NST_DEBUG_NAME, mode, + o2net_dentry, NULL, &nst_seq_fops); + if (nst_dentry) + sc_dentry = debugfs_create_file(SC_DEBUG_NAME, mode, + o2net_dentry, NULL, &sc_seq_fops); + if (sc_dentry) + stats_dentry = debugfs_create_file(STATS_DEBUG_NAME, mode, + o2net_dentry, NULL, &stats_seq_fops); + if (stats_dentry) + nodes_dentry = debugfs_create_file(NODES_DEBUG_NAME, mode, + o2net_dentry, NULL, &nodes_fops); + if (nodes_dentry) + return 0; + + o2net_debugfs_exit(); + mlog_errno(-ENOMEM); + return -ENOMEM; +} + #endif /* CONFIG_DEBUG_FS */ diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c index 6e97895..ae13d5c 100644 --- a/fs/ocfs2/cluster/tcp.c +++ b/fs/ocfs2/cluster/tcp.c @@ -1034,6 +1034,25 @@ static int o2net_tx_can_proceed(struct o2net_node *nn, return ret; } +/* Get a map of all nodes to which this node is currently connected to */ +void o2net_fill_node_map(unsigned long *map, unsigned bytes) +{ + struct o2net_sock_container *sc; + int node, ret; + + BUG_ON(bytes < (BITS_TO_LONGS(O2NM_MAX_NODES) * sizeof(unsigned long))); + + memset(map, 0, bytes); + for (node = 0; node < O2NM_MAX_NODES; ++node) { + o2net_tx_can_proceed(o2net_nn_from_num(node), &sc, &ret); + if (!ret) { + set_bit(node, map); + sc_put(sc); + } + } +} +EXPORT_SYMBOL_GPL(o2net_fill_node_map); + int o2net_send_message_vec(u32 msg_type, u32 key, struct kvec *caller_vec, size_t caller_veclen, u8 target_node, int *status) { diff --git a/fs/ocfs2/cluster/tcp.h b/fs/ocfs2/cluster/tcp.h index fd6179e..5bada2a 100644 --- a/fs/ocfs2/cluster/tcp.h +++ b/fs/ocfs2/cluster/tcp.h @@ -106,6 +106,8 @@ int o2net_register_handler(u32 msg_type, u32 key, u32 max_len, struct list_head *unreg_list); void o2net_unregister_handler_list(struct list_head *list); +void o2net_fill_node_map(unsigned long *map, unsigned bytes); + struct o2nm_node; int o2net_register_hb_callbacks(void); void o2net_unregister_hb_callbacks(void); -- cgit v0.10.2 From 6b27f62fc750d85bc6fc3718b3b38ec60edc2d74 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Sun, 24 Jul 2011 10:33:54 -0700 Subject: ocfs2/cluster: Cluster up now includes network connections too The cluster up check only checks to see if the node is heartbeating or not. If yes it continues assuming that the node is connected to all the nodes. But if that is not the case, the cluster join aborts with a stack of errors that are not easy to comprehend. This patch adds the network connect check upfront and prints the nodes that the node is not yet connected to, before aborting. Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/dlm/dlmdomain.c b/fs/ocfs2/dlm/dlmdomain.c index 200d988..92f2ead 100644 --- a/fs/ocfs2/dlm/dlmdomain.c +++ b/fs/ocfs2/dlm/dlmdomain.c @@ -2138,13 +2138,6 @@ struct dlm_ctxt * dlm_register_domain(const char *domain, goto leave; } - if (!o2hb_check_local_node_heartbeating()) { - mlog(ML_ERROR, "the local node has not been configured, or is " - "not heartbeating\n"); - ret = -EPROTO; - goto leave; - } - mlog(0, "register called for domain \"%s\"\n", domain); retry: diff --git a/fs/ocfs2/stack_o2cb.c b/fs/ocfs2/stack_o2cb.c index be935d8..9436801 100644 --- a/fs/ocfs2/stack_o2cb.c +++ b/fs/ocfs2/stack_o2cb.c @@ -28,6 +28,7 @@ #include "cluster/masklog.h" #include "cluster/nodemanager.h" #include "cluster/heartbeat.h" +#include "cluster/tcp.h" #include "stackglue.h" @@ -256,6 +257,61 @@ static void o2cb_dump_lksb(struct ocfs2_dlm_lksb *lksb) } /* + * Check if this node is heartbeating and is connected to all other + * heartbeating nodes. + */ +static int o2cb_cluster_check(void) +{ + u8 node_num; + int i; + unsigned long hbmap[BITS_TO_LONGS(O2NM_MAX_NODES)]; + unsigned long netmap[BITS_TO_LONGS(O2NM_MAX_NODES)]; + + node_num = o2nm_this_node(); + if (node_num == O2NM_MAX_NODES) { + printk(KERN_ERR "o2cb: This node has not been configured.\n"); + return -EINVAL; + } + + /* + * o2dlm expects o2net sockets to be created. If not, then + * dlm_join_domain() fails with a stack of errors which are both cryptic + * and incomplete. The idea here is to detect upfront whether we have + * managed to connect to all nodes or not. If not, then list the nodes + * to allow the user to check the configuration (incorrect IP, firewall, + * etc.) Yes, this is racy. But its not the end of the world. + */ +#define O2CB_MAP_STABILIZE_COUNT 60 + for (i = 0; i < O2CB_MAP_STABILIZE_COUNT; ++i) { + o2hb_fill_node_map(hbmap, sizeof(hbmap)); + if (!test_bit(node_num, hbmap)) { + printk(KERN_ERR "o2cb: %s heartbeat has not been " + "started.\n", (o2hb_global_heartbeat_active() ? + "Global" : "Local")); + return -EINVAL; + } + o2net_fill_node_map(netmap, sizeof(netmap)); + /* Force set the current node to allow easy compare */ + set_bit(node_num, netmap); + if (!memcmp(hbmap, netmap, sizeof(hbmap))) + return 0; + if (i < O2CB_MAP_STABILIZE_COUNT) + msleep(1000); + } + + printk(KERN_ERR "o2cb: This node could not connect to nodes:"); + i = -1; + while ((i = find_next_bit(hbmap, O2NM_MAX_NODES, + i + 1)) < O2NM_MAX_NODES) { + if (!test_bit(i, netmap)) + printk(" %u", i); + } + printk(".\n"); + + return -ENOTCONN; +} + +/* * Called from the dlm when it's about to evict a node. This is how the * classic stack signals node death. */ @@ -280,12 +336,11 @@ static int o2cb_cluster_connect(struct ocfs2_cluster_connection *conn) BUG_ON(conn == NULL); BUG_ON(conn->cc_proto == NULL); - /* for now we only have one cluster/node, make sure we see it - * in the heartbeat universe */ - if (!o2hb_check_local_node_heartbeating()) { - if (o2hb_global_heartbeat_active()) - mlog(ML_ERROR, "Global heartbeat not started\n"); - rc = -EINVAL; + /* Ensure cluster stack is up and all nodes are connected */ + rc = o2cb_cluster_check(); + if (rc) { + printk(KERN_ERR "o2cb: Cluster check failed. Fix errors " + "before retrying.\n"); goto out; } -- cgit v0.10.2 From 619c200de144b44f5e405305241bcd7edbb8c6cf Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Sun, 24 Jul 2011 10:34:54 -0700 Subject: ocfs2: Clean up messages in the fs Convert useful messages from ML_NOTICE to KERN_NOTICE to improve readability. Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c index 295d564..8eaaa78 100644 --- a/fs/ocfs2/journal.c +++ b/fs/ocfs2/journal.c @@ -1544,9 +1544,9 @@ static int ocfs2_replay_journal(struct ocfs2_super *osb, /* we need to run complete recovery for offline orphan slots */ ocfs2_replay_map_set_state(osb, REPLAY_NEEDED); - mlog(ML_NOTICE, "Recovering node %d from slot %d on device (%u,%u)\n", - node_num, slot_num, - MAJOR(osb->sb->s_dev), MINOR(osb->sb->s_dev)); + printk(KERN_NOTICE "ocfs2: Begin replay journal (node %d, slot %d) on "\ + "device (%u,%u)\n", node_num, slot_num, MAJOR(osb->sb->s_dev), + MINOR(osb->sb->s_dev)); OCFS2_I(inode)->ip_clusters = le32_to_cpu(fe->i_clusters); @@ -1601,6 +1601,9 @@ static int ocfs2_replay_journal(struct ocfs2_super *osb, jbd2_journal_destroy(journal); + printk(KERN_NOTICE "ocfs2: End replay journal (node %d, slot %d) on "\ + "device (%u,%u)\n", node_num, slot_num, MAJOR(osb->sb->s_dev), + MINOR(osb->sb->s_dev)); done: /* drop the lock on this nodes journal */ if (got_lock) diff --git a/fs/ocfs2/quota_local.c b/fs/ocfs2/quota_local.c index dc8007f..942fd65 100644 --- a/fs/ocfs2/quota_local.c +++ b/fs/ocfs2/quota_local.c @@ -404,7 +404,9 @@ struct ocfs2_quota_recovery *ocfs2_begin_quota_recovery( int status = 0; struct ocfs2_quota_recovery *rec; - mlog(ML_NOTICE, "Beginning quota recovery in slot %u\n", slot_num); + printk(KERN_NOTICE "ocfs2: Beginning quota recovery on device (%s) for " + "slot %u\n", osb->dev_str, slot_num); + rec = ocfs2_alloc_quota_recovery(); if (!rec) return ERR_PTR(-ENOMEM); @@ -596,7 +598,9 @@ int ocfs2_finish_quota_recovery(struct ocfs2_super *osb, struct inode *lqinode; unsigned int flags; - mlog(ML_NOTICE, "Finishing quota recovery in slot %u\n", slot_num); + printk(KERN_NOTICE "ocfs2: Finishing quota recovery on device (%s) for " + "slot %u\n", osb->dev_str, slot_num); + mutex_lock(&sb_dqopt(sb)->dqonoff_mutex); for (type = 0; type < MAXQUOTAS; type++) { if (list_empty(&(rec->r_list[type]))) @@ -612,8 +616,9 @@ int ocfs2_finish_quota_recovery(struct ocfs2_super *osb, /* Someone else is holding the lock? Then he must be * doing the recovery. Just skip the file... */ if (status == -EAGAIN) { - mlog(ML_NOTICE, "skipping quota recovery for slot %d " - "because quota file is locked.\n", slot_num); + printk(KERN_NOTICE "ocfs2: Skipping quota recovery on " + "device (%s) for slot %d because quota file is " + "locked.\n", osb->dev_str, slot_num); status = 0; goto out_put; } else if (status < 0) { diff --git a/fs/ocfs2/slot_map.c b/fs/ocfs2/slot_map.c index 26fc001..1424c15 100644 --- a/fs/ocfs2/slot_map.c +++ b/fs/ocfs2/slot_map.c @@ -493,8 +493,8 @@ int ocfs2_find_slot(struct ocfs2_super *osb) goto bail; } } else - mlog(ML_NOTICE, "slot %d is already allocated to this node!\n", - slot); + printk(KERN_INFO "ocfs2: Slot %d on device (%s) was already " + "allocated to this node!\n", slot, osb->dev_str); ocfs2_set_slot(si, slot, osb->node_num); osb->slot_num = slot; diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index 56f6102..3e78503 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -1107,9 +1107,9 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent) ocfs2_set_ro_flag(osb, 1); - printk(KERN_NOTICE "Readonly device detected. No cluster " - "services will be utilized for this mount. Recovery " - "will be skipped.\n"); + printk(KERN_NOTICE "ocfs2: Readonly device (%s) detected. " + "Cluster services will not be used for this mount. " + "Recovery will be skipped.\n", osb->dev_str); } if (!ocfs2_is_hard_readonly(osb)) { @@ -2462,8 +2462,8 @@ static int ocfs2_check_volume(struct ocfs2_super *osb) goto finally; } } else { - mlog(ML_NOTICE, "File system was not unmounted cleanly, " - "recovering volume.\n"); + printk(KERN_NOTICE "ocfs2: File system on device (%s) was not " + "unmounted cleanly, recovering it.\n", osb->dev_str); } local = ocfs2_mount_local(osb); -- cgit v0.10.2 From a035bff6b82aca89c1223e2c614adc2d17ec8aa2 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Sun, 24 Jul 2011 10:35:54 -0700 Subject: ocfs2: Add comment about orphan scanning Add a comment that explains the reason as to why orphan scan scans all the slots. Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c index 8eaaa78..0a42ae9 100644 --- a/fs/ocfs2/journal.c +++ b/fs/ocfs2/journal.c @@ -1811,6 +1811,20 @@ static inline unsigned long ocfs2_orphan_scan_timeout(void) * every slot, queuing a recovery of the slot on the ocfs2_wq thread. This * is done to catch any orphans that are left over in orphan directories. * + * It scans all slots, even ones that are in use. It does so to handle the + * case described below: + * + * Node 1 has an inode it was using. The dentry went away due to memory + * pressure. Node 1 closes the inode, but it's on the free list. The node + * has the open lock. + * Node 2 unlinks the inode. It grabs the dentry lock to notify others, + * but node 1 has no dentry and doesn't get the message. It trylocks the + * open lock, sees that another node has a PR, and does nothing. + * Later node 2 runs its orphan dir. It igets the inode, trylocks the + * open lock, sees the PR still, and does nothing. + * Basically, we have to trigger an orphan iput on node 1. The only way + * for this to happen is if node 1 runs node 2's orphan dir. + * * ocfs2_queue_orphan_scan gets called every ORPHAN_SCAN_SCHEDULE_TIMEOUT * seconds. It gets an EX lock on os_lockres and checks sequence number * stored in LVB. If the sequence number has changed, it means some other -- cgit v0.10.2 From 5cffff9e29866a3de98c2c25135b3199491f93b0 Mon Sep 17 00:00:00 2001 From: Wengang Wang Date: Sun, 24 Jul 2011 10:36:54 -0700 Subject: ocfs2: Fix ocfs2_page_mkwrite() This patch address two shortcomings in ocfs2_page_mkwrite(): 1. Makes the function return better VM_FAULT_* errors. 2. It handles a error that is triggered when a page is dropped from the mapping due to memory pressure. This patch locks the page to prevent that. [Patch was cleaned up by Sunil Mushran.] Signed-off-by: Wengang Wang Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c index c1efe93..ff98c16 100644 --- a/fs/ocfs2/aops.c +++ b/fs/ocfs2/aops.c @@ -863,6 +863,12 @@ struct ocfs2_write_ctxt { struct page *w_target_page; /* + * w_target_locked is used for page_mkwrite path indicating no unlocking + * against w_target_page in ocfs2_write_end_nolock. + */ + unsigned int w_target_locked:1; + + /* * ocfs2_write_end() uses this to know what the real range to * write in the target should be. */ @@ -895,6 +901,24 @@ void ocfs2_unlock_and_free_pages(struct page **pages, int num_pages) static void ocfs2_free_write_ctxt(struct ocfs2_write_ctxt *wc) { + int i; + + /* + * w_target_locked is only set to true in the page_mkwrite() case. + * The intent is to allow us to lock the target page from write_begin() + * to write_end(). The caller must hold a ref on w_target_page. + */ + if (wc->w_target_locked) { + BUG_ON(!wc->w_target_page); + for (i = 0; i < wc->w_num_pages; i++) { + if (wc->w_target_page == wc->w_pages[i]) { + wc->w_pages[i] = NULL; + break; + } + } + mark_page_accessed(wc->w_target_page); + page_cache_release(wc->w_target_page); + } ocfs2_unlock_and_free_pages(wc->w_pages, wc->w_num_pages); brelse(wc->w_di_bh); @@ -1132,20 +1156,17 @@ static int ocfs2_grab_pages_for_write(struct address_space *mapping, */ lock_page(mmap_page); + /* Exit and let the caller retry */ if (mmap_page->mapping != mapping) { + WARN_ON(mmap_page->mapping); unlock_page(mmap_page); - /* - * Sanity check - the locking in - * ocfs2_pagemkwrite() should ensure - * that this code doesn't trigger. - */ - ret = -EINVAL; - mlog_errno(ret); + ret = -EAGAIN; goto out; } page_cache_get(mmap_page); wc->w_pages[i] = mmap_page; + wc->w_target_locked = true; } else { wc->w_pages[i] = find_or_create_page(mapping, index, GFP_NOFS); @@ -1160,6 +1181,8 @@ static int ocfs2_grab_pages_for_write(struct address_space *mapping, wc->w_target_page = wc->w_pages[i]; } out: + if (ret) + wc->w_target_locked = false; return ret; } @@ -1817,11 +1840,23 @@ try_again: */ ret = ocfs2_grab_pages_for_write(mapping, wc, wc->w_cpos, pos, len, cluster_of_pages, mmap_page); - if (ret) { + if (ret && ret != -EAGAIN) { mlog_errno(ret); goto out_quota; } + /* + * ocfs2_grab_pages_for_write() returns -EAGAIN if it could not lock + * the target page. In this case, we exit with no error and no target + * page. This will trigger the caller, page_mkwrite(), to re-try + * the operation. + */ + if (ret == -EAGAIN) { + BUG_ON(wc->w_target_page); + ret = 0; + goto out_quota; + } + ret = ocfs2_write_cluster_by_desc(mapping, data_ac, meta_ac, wc, pos, len); if (ret) { diff --git a/fs/ocfs2/mmap.c b/fs/ocfs2/mmap.c index 3e9393c..9cd4108 100644 --- a/fs/ocfs2/mmap.c +++ b/fs/ocfs2/mmap.c @@ -61,7 +61,7 @@ static int ocfs2_fault(struct vm_area_struct *area, struct vm_fault *vmf) static int __ocfs2_page_mkwrite(struct file *file, struct buffer_head *di_bh, struct page *page) { - int ret; + int ret = VM_FAULT_NOPAGE; struct inode *inode = file->f_path.dentry->d_inode; struct address_space *mapping = inode->i_mapping; loff_t pos = page_offset(page); @@ -71,32 +71,25 @@ static int __ocfs2_page_mkwrite(struct file *file, struct buffer_head *di_bh, void *fsdata; loff_t size = i_size_read(inode); - /* - * Another node might have truncated while we were waiting on - * cluster locks. - * We don't check size == 0 before the shift. This is borrowed - * from do_generic_file_read. - */ last_index = (size - 1) >> PAGE_CACHE_SHIFT; - if (unlikely(!size || page->index > last_index)) { - ret = -EINVAL; - goto out; - } /* - * The i_size check above doesn't catch the case where nodes - * truncated and then re-extended the file. We'll re-check the - * page mapping after taking the page lock inside of - * ocfs2_write_begin_nolock(). + * There are cases that lead to the page no longer bebongs to the + * mapping. + * 1) pagecache truncates locally due to memory pressure. + * 2) pagecache truncates when another is taking EX lock against + * inode lock. see ocfs2_data_convert_worker. + * + * The i_size check doesn't catch the case where nodes truncated and + * then re-extended the file. We'll re-check the page mapping after + * taking the page lock inside of ocfs2_write_begin_nolock(). + * + * Let VM retry with these cases. */ - if (!PageUptodate(page) || page->mapping != inode->i_mapping) { - /* - * the page has been umapped in ocfs2_data_downconvert_worker. - * So return 0 here and let VFS retry. - */ - ret = 0; + if ((page->mapping != inode->i_mapping) || + (!PageUptodate(page)) || + (page_offset(page) >= size)) goto out; - } /* * Call ocfs2_write_begin() and ocfs2_write_end() to take @@ -116,17 +109,21 @@ static int __ocfs2_page_mkwrite(struct file *file, struct buffer_head *di_bh, if (ret) { if (ret != -ENOSPC) mlog_errno(ret); + if (ret == -ENOMEM) + ret = VM_FAULT_OOM; + else + ret = VM_FAULT_SIGBUS; goto out; } - ret = ocfs2_write_end_nolock(mapping, pos, len, len, locked_page, - fsdata); - if (ret < 0) { - mlog_errno(ret); + if (!locked_page) { + ret = VM_FAULT_NOPAGE; goto out; } + ret = ocfs2_write_end_nolock(mapping, pos, len, len, locked_page, + fsdata); BUG_ON(ret != len); - ret = 0; + ret = VM_FAULT_LOCKED; out: return ret; } @@ -168,8 +165,6 @@ static int ocfs2_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf) out: ocfs2_unblock_signals(&oldset); - if (ret) - ret = VM_FAULT_SIGBUS; return ret; } -- cgit v0.10.2 From 93862d5e1ab875664c6cc95254fc365028a48bb1 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Mon, 25 Jul 2011 14:58:15 -0700 Subject: ocfs2: Implement llseek() ocfs2 implements its own llseek() to provide the SEEK_HOLE/SEEK_DATA functionality. SEEK_HOLE sets the file pointer to the start of either a hole or an unwritten (preallocated) extent, that is greater than or equal to the supplied offset. SEEK_DATA sets the file pointer to the start of an allocated extent (not unwritten) that is greater than or equal to the supplied offset. If the supplied offset is on a desired region, then the file pointer is set to it. Offsets greater than or equal to the file size return -ENXIO. Unwritten (preallocated) extents are considered holes because the file system treats reads to such regions in the same way as it does to holes. Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/extent_map.c b/fs/ocfs2/extent_map.c index 23457b4..2f5b92e 100644 --- a/fs/ocfs2/extent_map.c +++ b/fs/ocfs2/extent_map.c @@ -832,6 +832,102 @@ out: return ret; } +int ocfs2_seek_data_hole_offset(struct file *file, loff_t *offset, int origin) +{ + struct inode *inode = file->f_mapping->host; + int ret; + unsigned int is_last = 0, is_data = 0; + u16 cs_bits = OCFS2_SB(inode->i_sb)->s_clustersize_bits; + u32 cpos, cend, clen, hole_size; + u64 extoff, extlen; + struct buffer_head *di_bh = NULL; + struct ocfs2_extent_rec rec; + + BUG_ON(origin != SEEK_DATA && origin != SEEK_HOLE); + + ret = ocfs2_inode_lock(inode, &di_bh, 0); + if (ret) { + mlog_errno(ret); + goto out; + } + + down_read(&OCFS2_I(inode)->ip_alloc_sem); + + if (*offset >= inode->i_size) { + ret = -ENXIO; + goto out_unlock; + } + + if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) { + if (origin == SEEK_HOLE) + *offset = inode->i_size; + goto out_unlock; + } + + clen = 0; + cpos = *offset >> cs_bits; + cend = ocfs2_clusters_for_bytes(inode->i_sb, inode->i_size); + + while (cpos < cend && !is_last) { + ret = ocfs2_get_clusters_nocache(inode, di_bh, cpos, &hole_size, + &rec, &is_last); + if (ret) { + mlog_errno(ret); + goto out_unlock; + } + + extoff = cpos; + extoff <<= cs_bits; + + if (rec.e_blkno == 0ULL) { + clen = hole_size; + is_data = 0; + } else { + clen = le16_to_cpu(rec.e_leaf_clusters) - + (cpos - le32_to_cpu(rec.e_cpos)); + is_data = (rec.e_flags & OCFS2_EXT_UNWRITTEN) ? 0 : 1; + } + + if ((!is_data && origin == SEEK_HOLE) || + (is_data && origin == SEEK_DATA)) { + if (extoff > *offset) + *offset = extoff; + goto out_unlock; + } + + if (!is_last) + cpos += clen; + } + + if (origin == SEEK_HOLE) { + extoff = cpos; + extoff <<= cs_bits; + extlen = clen; + extlen <<= cs_bits; + + if ((extoff + extlen) > inode->i_size) + extlen = inode->i_size - extoff; + extoff += extlen; + if (extoff > *offset) + *offset = extoff; + goto out_unlock; + } + + ret = -ENXIO; + +out_unlock: + + brelse(di_bh); + + up_read(&OCFS2_I(inode)->ip_alloc_sem); + + ocfs2_inode_unlock(inode, 0); +out: + if (ret && ret != -ENXIO) + ret = -ENXIO; + return ret; +} + int ocfs2_read_virt_blocks(struct inode *inode, u64 v_block, int nr, struct buffer_head *bhs[], int flags, int (*validate)(struct super_block *sb, diff --git a/fs/ocfs2/extent_map.h b/fs/ocfs2/extent_map.h index e79d41c..67ea57d 100644 --- a/fs/ocfs2/extent_map.h +++ b/fs/ocfs2/extent_map.h @@ -53,6 +53,8 @@ int ocfs2_extent_map_get_blocks(struct inode *inode, u64 v_blkno, u64 *p_blkno, int ocfs2_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, u64 map_start, u64 map_len); +int ocfs2_seek_data_hole_offset(struct file *file, loff_t *offset, int origin); + int ocfs2_xattr_get_clusters(struct inode *inode, u32 v_cluster, u32 *p_cluster, u32 *num_clusters, struct ocfs2_extent_list *el, diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 0fc2bd3..c0f015e 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -2591,6 +2591,57 @@ bail: return ret; } +/* Refer generic_file_llseek_unlocked() */ +static loff_t ocfs2_file_llseek(struct file *file, loff_t offset, int origin) +{ + struct inode *inode = file->f_mapping->host; + int ret = 0; + + mutex_lock(&inode->i_mutex); + + switch (origin) { + case SEEK_SET: + break; + case SEEK_END: + offset += inode->i_size; + break; + case SEEK_CUR: + if (offset == 0) { + offset = file->f_pos; + goto out; + } + offset += file->f_pos; + break; + case SEEK_DATA: + case SEEK_HOLE: + ret = ocfs2_seek_data_hole_offset(file, &offset, origin); + if (ret) + goto out; + break; + default: + ret = -EINVAL; + goto out; + } + + if (offset < 0 && !(file->f_mode & FMODE_UNSIGNED_OFFSET)) + ret = -EINVAL; + if (!ret && offset > inode->i_sb->s_maxbytes) + ret = -EINVAL; + if (ret) + goto out; + + if (offset != file->f_pos) { + file->f_pos = offset; + file->f_version = 0; + } + +out: + mutex_unlock(&inode->i_mutex); + if (ret) + return ret; + return offset; +} + const struct inode_operations ocfs2_file_iops = { .setattr = ocfs2_setattr, .getattr = ocfs2_getattr, @@ -2615,7 +2666,7 @@ const struct inode_operations ocfs2_special_file_iops = { * ocfs2_fops_no_plocks and ocfs2_dops_no_plocks! */ const struct file_operations ocfs2_fops = { - .llseek = generic_file_llseek, + .llseek = ocfs2_file_llseek, .read = do_sync_read, .write = do_sync_write, .mmap = ocfs2_mmap, @@ -2663,7 +2714,7 @@ const struct file_operations ocfs2_dops = { * the cluster. */ const struct file_operations ocfs2_fops_no_plocks = { - .llseek = generic_file_llseek, + .llseek = ocfs2_file_llseek, .read = do_sync_read, .write = do_sync_write, .mmap = ocfs2_mmap, -- cgit v0.10.2 From a11f7e63c59810a81494d4c4b028af707d4c7ca4 Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Wed, 22 Jun 2011 14:23:38 -0700 Subject: ocfs2: serialize unaligned aio Fix a corruption that can happen when we have (two or more) outstanding aio's to an overlapping unaligned region. Ext4 (e9e3bcecf44c04b9e6b505fd8e2eb9cea58fb94d) and xfs recently had to fix similar issues. In our case what happens is that we can have an outstanding aio on a region and if a write comes in with some bytes overlapping the original aio we may decide to read that region into a page before continuing (typically because of buffered-io fallback). Since we have no ordering guarantees with the aio, we can read stale or bad data into the page and then write it back out. If the i/o is page and block aligned, then we avoid this issue as there won't be any need to read data from disk. I took the same approach as Eric in the ext4 patch and introduced some serialization of unaligned async direct i/o. I don't expect this to have an effect on the most common cases of AIO. Unaligned aio will be slower though, but that's far more acceptable than data corruption. Signed-off-by: Mark Fasheh Signed-off-by: Joel Becker diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c index ac97bca..4c1ec8f 100644 --- a/fs/ocfs2/aops.c +++ b/fs/ocfs2/aops.c @@ -564,6 +564,7 @@ static void ocfs2_dio_end_io(struct kiocb *iocb, { struct inode *inode = iocb->ki_filp->f_path.dentry->d_inode; int level; + wait_queue_head_t *wq = ocfs2_ioend_wq(inode); /* this io's submitter should not have unlocked this before we could */ BUG_ON(!ocfs2_iocb_is_rw_locked(iocb)); @@ -573,6 +574,15 @@ static void ocfs2_dio_end_io(struct kiocb *iocb, ocfs2_iocb_clear_sem_locked(iocb); } + if (ocfs2_iocb_is_unaligned_aio(iocb)) { + ocfs2_iocb_clear_unaligned_aio(iocb); + + if (atomic_dec_and_test(&OCFS2_I(inode)->ip_unaligned_aio) && + waitqueue_active(wq)) { + wake_up_all(wq); + } + } + ocfs2_iocb_clear_rw_locked(iocb); level = ocfs2_iocb_rw_locked_level(iocb); diff --git a/fs/ocfs2/aops.h b/fs/ocfs2/aops.h index 75cf3ad..ffb2da3 100644 --- a/fs/ocfs2/aops.h +++ b/fs/ocfs2/aops.h @@ -78,6 +78,7 @@ enum ocfs2_iocb_lock_bits { OCFS2_IOCB_RW_LOCK = 0, OCFS2_IOCB_RW_LOCK_LEVEL, OCFS2_IOCB_SEM, + OCFS2_IOCB_UNALIGNED_IO, OCFS2_IOCB_NUM_LOCKS }; @@ -91,4 +92,17 @@ enum ocfs2_iocb_lock_bits { clear_bit(OCFS2_IOCB_SEM, (unsigned long *)&iocb->private) #define ocfs2_iocb_is_sem_locked(iocb) \ test_bit(OCFS2_IOCB_SEM, (unsigned long *)&iocb->private) + +#define ocfs2_iocb_set_unaligned_aio(iocb) \ + set_bit(OCFS2_IOCB_UNALIGNED_IO, (unsigned long *)&iocb->private) +#define ocfs2_iocb_clear_unaligned_aio(iocb) \ + clear_bit(OCFS2_IOCB_UNALIGNED_IO, (unsigned long *)&iocb->private) +#define ocfs2_iocb_is_unaligned_aio(iocb) \ + test_bit(OCFS2_IOCB_UNALIGNED_IO, (unsigned long *)&iocb->private) + +#define OCFS2_IOEND_WQ_HASH_SZ 37 +#define ocfs2_ioend_wq(v) (&ocfs2__ioend_wq[((unsigned long)(v)) %\ + OCFS2_IOEND_WQ_HASH_SZ]) +extern wait_queue_head_t ocfs2__ioend_wq[OCFS2_IOEND_WQ_HASH_SZ]; + #endif /* OCFS2_FILE_H */ diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index b1e35a3..145f453 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -2038,6 +2038,23 @@ out: return ret; } +static void ocfs2_aiodio_wait(struct inode *inode) +{ + wait_queue_head_t *wq = ocfs2_ioend_wq(inode); + + wait_event(*wq, (atomic_read(&OCFS2_I(inode)->ip_unaligned_aio) == 0)); +} + +static int ocfs2_is_io_unaligned(struct inode *inode, size_t count, loff_t pos) +{ + int blockmask = inode->i_sb->s_blocksize - 1; + loff_t final_size = pos + count; + + if ((pos & blockmask) || (final_size & blockmask)) + return 1; + return 0; +} + static int ocfs2_prepare_inode_for_refcount(struct inode *inode, struct file *file, loff_t pos, size_t count, @@ -2216,6 +2233,7 @@ static ssize_t ocfs2_file_aio_write(struct kiocb *iocb, struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); int full_coherency = !(osb->s_mount_opt & OCFS2_MOUNT_COHERENCY_BUFFERED); + int unaligned_dio = 0; trace_ocfs2_file_aio_write(inode, file, file->f_path.dentry, (unsigned long long)OCFS2_I(inode)->ip_blkno, @@ -2284,6 +2302,10 @@ relock: goto out; } + if (direct_io && !is_sync_kiocb(iocb)) + unaligned_dio = ocfs2_is_io_unaligned(inode, iocb->ki_left, + *ppos); + /* * We can't complete the direct I/O as requested, fall back to * buffered I/O. @@ -2299,6 +2321,18 @@ relock: goto relock; } + if (unaligned_dio) { + /* + * Wait on previous unaligned aio to complete before + * proceeding. + */ + ocfs2_aiodio_wait(inode); + + /* Mark the iocb as needing a decrement in ocfs2_dio_end_io */ + atomic_inc(&OCFS2_I(inode)->ip_unaligned_aio); + ocfs2_iocb_set_unaligned_aio(iocb); + } + /* * To later detect whether a journal commit for sync writes is * necessary, we sample i_size, and cluster count here. @@ -2371,8 +2405,12 @@ out_dio: if ((ret == -EIOCBQUEUED) || (!ocfs2_iocb_is_rw_locked(iocb))) { rw_level = -1; have_alloc_sem = 0; + unaligned_dio = 0; } + if (unaligned_dio) + atomic_dec(&OCFS2_I(inode)->ip_unaligned_aio); + out: if (rw_level != -1) ocfs2_rw_unlock(inode, rw_level); diff --git a/fs/ocfs2/inode.h b/fs/ocfs2/inode.h index 1c508b1..88924a3 100644 --- a/fs/ocfs2/inode.h +++ b/fs/ocfs2/inode.h @@ -43,6 +43,9 @@ struct ocfs2_inode_info /* protects extended attribute changes on this inode */ struct rw_semaphore ip_xattr_sem; + /* Number of outstanding AIO's which are not page aligned */ + atomic_t ip_unaligned_aio; + /* These fields are protected by ip_lock */ spinlock_t ip_lock; u32 ip_open_count; diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index 029c4cd..603f5fe 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -54,6 +54,7 @@ #include "ocfs1_fs_compat.h" #include "alloc.h" +#include "aops.h" #include "blockcheck.h" #include "dlmglue.h" #include "export.h" @@ -1616,12 +1617,17 @@ static int ocfs2_show_options(struct seq_file *s, struct vfsmount *mnt) return 0; } +wait_queue_head_t ocfs2__ioend_wq[OCFS2_IOEND_WQ_HASH_SZ]; + static int __init ocfs2_init(void) { - int status; + int status, i; ocfs2_print_version(); + for (i = 0; i < OCFS2_IOEND_WQ_HASH_SZ; i++) + init_waitqueue_head(&ocfs2__ioend_wq[i]); + status = init_ocfs2_uptodate_cache(); if (status < 0) { mlog_errno(status); @@ -1760,7 +1766,7 @@ static void ocfs2_inode_init_once(void *data) ocfs2_extent_map_init(&oi->vfs_inode); INIT_LIST_HEAD(&oi->ip_io_markers); oi->ip_dir_start_lookup = 0; - + atomic_set(&oi->ip_unaligned_aio, 0); init_rwsem(&oi->ip_alloc_sem); init_rwsem(&oi->ip_xattr_sem); mutex_init(&oi->ip_io_mutex); -- cgit v0.10.2 From c7e25e6e0b0486492c5faaf6312b37413642c48e Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Thu, 23 Jun 2011 22:51:47 +0200 Subject: ocfs2: Avoid livelock in ocfs2_readpage() When someone writes to an inode, readers accessing the same inode via ocfs2_readpage() just busyloop trying to get ip_alloc_sem because do_generic_file_read() looks up the page again and retries ->readpage() when previous attempt failed with AOP_TRUNCATED_PAGE. When there are enough readers, they can occupy all CPUs and in non-preempt kernel the system is deadlocked because writer holding ip_alloc_sem is never run to release the semaphore. Fix the problem by making reader block on ip_alloc_sem to break the busy loop. Signed-off-by: Jan Kara Signed-off-by: Joel Becker diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c index 4c1ec8f..ba3ca1e 100644 --- a/fs/ocfs2/aops.c +++ b/fs/ocfs2/aops.c @@ -290,7 +290,15 @@ static int ocfs2_readpage(struct file *file, struct page *page) } if (down_read_trylock(&oi->ip_alloc_sem) == 0) { + /* + * Unlock the page and cycle ip_alloc_sem so that we don't + * busyloop waiting for ip_alloc_sem to unlock + */ ret = AOP_TRUNCATED_PAGE; + unlock_page(page); + unlock = 0; + down_read(&oi->ip_alloc_sem); + up_read(&oi->ip_alloc_sem); goto out_inode_unlock; } -- cgit v0.10.2 From c2bc11113c50449f23c40b724fe410fc2380a8e9 Mon Sep 17 00:00:00 2001 From: John Stultz Date: Thu, 27 Oct 2011 18:12:42 -0700 Subject: time: Improve documentation of timekeeeping_adjust() After getting a number of questions in private emails about the math around admittedly very complex timekeeping_adjust() and timekeeping_big_adjust(), I figure the code needs some better comments. Hopefully the explanations are clear enough and don't muddy the water any worse. Still needs documentation for ntp_error, but I couldn't recall exactly the full explanation behind the code that's there (although I do recall once working it out when Roman first proposed it). Given a bit more time I can probably work it out, but I don't want to hold back this documentation until then. Signed-off-by: John Stultz Cc: Chen Jie Cc: Steven Rostedt Link: http://lkml.kernel.org/r/1319764362-32367-1-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 2b021b0e..025e136 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -802,14 +802,44 @@ static void timekeeping_adjust(s64 offset) s64 error, interval = timekeeper.cycle_interval; int adj; + /* + * The point of this is to check if the error is greater then half + * an interval. + * + * First we shift it down from NTP_SHIFT to clocksource->shifted nsecs. + * + * Note we subtract one in the shift, so that error is really error*2. + * This "saves" dividing(shifting) intererval twice, but keeps the + * (error > interval) comparision as still measuring if error is + * larger then half an interval. + * + * Note: It does not "save" on aggrivation when reading the code. + */ error = timekeeper.ntp_error >> (timekeeper.ntp_error_shift - 1); if (error > interval) { + /* + * We now divide error by 4(via shift), which checks if + * the error is greater then twice the interval. + * If it is greater, we need a bigadjust, if its smaller, + * we can adjust by 1. + */ error >>= 2; + /* + * XXX - In update_wall_time, we round up to the next + * nanosecond, and store the amount rounded up into + * the error. This causes the likely below to be unlikely. + * + * The properfix is to avoid rounding up by using + * the high precision timekeeper.xtime_nsec instead of + * xtime.tv_nsec everywhere. Fixing this will take some + * time. + */ if (likely(error <= interval)) adj = 1; else adj = timekeeping_bigadjust(error, &interval, &offset); } else if (error < -interval) { + /* See comment above, this is just switched for the negative */ error >>= 2; if (likely(error >= -interval)) { adj = -1; @@ -817,9 +847,58 @@ static void timekeeping_adjust(s64 offset) offset = -offset; } else adj = timekeeping_bigadjust(error, &interval, &offset); - } else + } else /* No adjustment needed */ return; + /* + * So the following can be confusing. + * + * To keep things simple, lets assume adj == 1 for now. + * + * When adj != 1, remember that the interval and offset values + * have been appropriately scaled so the math is the same. + * + * The basic idea here is that we're increasing the multiplier + * by one, this causes the xtime_interval to be incremented by + * one cycle_interval. This is because: + * xtime_interval = cycle_interval * mult + * So if mult is being incremented by one: + * xtime_interval = cycle_interval * (mult + 1) + * Its the same as: + * xtime_interval = (cycle_interval * mult) + cycle_interval + * Which can be shortened to: + * xtime_interval += cycle_interval + * + * So offset stores the non-accumulated cycles. Thus the current + * time (in shifted nanoseconds) is: + * now = (offset * adj) + xtime_nsec + * Now, even though we're adjusting the clock frequency, we have + * to keep time consistent. In other words, we can't jump back + * in time, and we also want to avoid jumping forward in time. + * + * So given the same offset value, we need the time to be the same + * both before and after the freq adjustment. + * now = (offset * adj_1) + xtime_nsec_1 + * now = (offset * adj_2) + xtime_nsec_2 + * So: + * (offset * adj_1) + xtime_nsec_1 = + * (offset * adj_2) + xtime_nsec_2 + * And we know: + * adj_2 = adj_1 + 1 + * So: + * (offset * adj_1) + xtime_nsec_1 = + * (offset * (adj_1+1)) + xtime_nsec_2 + * (offset * adj_1) + xtime_nsec_1 = + * (offset * adj_1) + offset + xtime_nsec_2 + * Canceling the sides: + * xtime_nsec_1 = offset + xtime_nsec_2 + * Which gives us: + * xtime_nsec_2 = xtime_nsec_1 - offset + * Which simplfies to: + * xtime_nsec -= offset + * + * XXX - TODO: Doc ntp_error calculation. + */ timekeeper.mult += adj; timekeeper.xtime_interval += interval; timekeeper.xtime_nsec -= offset; -- cgit v0.10.2 From f74974c763c872d65da4062a14f4e73c77a0b577 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 11 Oct 2011 17:27:51 +0200 Subject: drm/i915: disable temporal dithering on the internal panel MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit i'm getting tempted to just disable temporal Approved. apparently it makes the screen look pulse-y which is worse than the disease. References: http://lists.freedesktop.org/archives/intel-gfx/2011-October/012545.html Tested-by: Олег Герман Reviewed-by: Adam Jackson Signed-off-by: Daniel Vetter Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 981b1f1..b75bd93 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5671,7 +5671,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, pipeconf &= ~PIPECONF_DITHER_TYPE_MASK; if ((is_lvds && dev_priv->lvds_dither) || dither) { pipeconf |= PIPECONF_DITHER_EN; - pipeconf |= PIPECONF_DITHER_TYPE_ST1; + pipeconf |= PIPECONF_DITHER_TYPE_SP; } if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) { intel_dp_set_m_n(crtc, mode, adjusted_mode); -- cgit v0.10.2 From 80a2901d2a59946d098c4479d650d0c3c82c3d85 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 11 Oct 2011 10:59:05 +0200 Subject: drm/i915: only match on PCI_BASE_CLASS_DISPLAY ... not DISPLAY_VGA, because we ignore the VGA subclass with our class_mask. It confused me until Chris Wilson clued me up. Signed-off-by: Daniel Vetter Reviewed-by: Adam Jackson Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 4c8d681..548e04b 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -106,7 +106,7 @@ static struct drm_driver driver; extern int intel_agp_enabled; #define INTEL_VGA_DEVICE(id, info) { \ - .class = PCI_CLASS_DISPLAY_VGA << 8, \ + .class = PCI_BASE_CLASS_DISPLAY << 16, \ .class_mask = 0xff0000, \ .vendor = 0x8086, \ .device = id, \ -- cgit v0.10.2 From 828204903945002be837d938401e242978b7b505 Mon Sep 17 00:00:00 2001 From: Adam Jackson Date: Mon, 10 Oct 2011 16:33:34 -0400 Subject: drm/i915: intel_choose_pipe_bpp_dither messages should be DRM_DEBUG_KMS Shouldn't hide these behind _DRIVER, they're all KMS-related. Signed-off-by: Adam Jackson Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index b75bd93..9fa342e 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4711,7 +4711,7 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, lvds_bpc = 6; if (lvds_bpc < display_bpc) { - DRM_DEBUG_DRIVER("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc); + DRM_DEBUG_KMS("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc); display_bpc = lvds_bpc; } continue; @@ -4722,7 +4722,7 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, unsigned int edp_bpc = dev_priv->edp.bpp / 3; if (edp_bpc < display_bpc) { - DRM_DEBUG_DRIVER("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc); + DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc); display_bpc = edp_bpc; } continue; @@ -4737,7 +4737,7 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, /* Don't use an invalid EDID bpc value */ if (connector->display_info.bpc && connector->display_info.bpc < display_bpc) { - DRM_DEBUG_DRIVER("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc); + DRM_DEBUG_KMS("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc); display_bpc = connector->display_info.bpc; } } @@ -4748,10 +4748,10 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, */ if (intel_encoder->type == INTEL_OUTPUT_HDMI) { if (display_bpc > 8 && display_bpc < 12) { - DRM_DEBUG_DRIVER("forcing bpc to 12 for HDMI\n"); + DRM_DEBUG_KMS("forcing bpc to 12 for HDMI\n"); display_bpc = 12; } else { - DRM_DEBUG_DRIVER("forcing bpc to 8 for HDMI\n"); + DRM_DEBUG_KMS("forcing bpc to 8 for HDMI\n"); display_bpc = 8; } } @@ -4789,8 +4789,8 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, display_bpc = min(display_bpc, bpc); - DRM_DEBUG_DRIVER("setting pipe bpc to %d (max display bpc %d)\n", - bpc, display_bpc); + DRM_DEBUG_KMS("setting pipe bpc to %d (max display bpc %d)\n", + bpc, display_bpc); *pipe_bpp = display_bpc * 3; -- cgit v0.10.2 From 3fca806cf343155d0bb0dfbdbc2e51ef47b65750 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 28 Oct 2011 14:42:41 +0300 Subject: drm/i915: fix if statement (bogus semi-colon) The semi-colon is a typo here and it makes the if statement unconditional. Signed-off-by: Dan Carpenter Signed-off-by: Keith Packard diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index 66cd0b8..3a8d448 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -1236,7 +1236,7 @@ static int i9xx_setup(void) intel_private.gtt_bus_addr = reg_addr + gtt_offset; } - if (needs_idle_maps()); + if (needs_idle_maps()) intel_private.base.do_idle_maps = 1; intel_i9xx_setup_flush(); -- cgit v0.10.2 From c5e62bdd73da80e1017058c923336a5a150af9f2 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Fri, 28 Oct 2011 10:28:00 -0700 Subject: agp: iommu_gfx_mapped only available if CONFIG_INTEL_IOMMU is set Kernels with no iommu support cannot ever need the Ironlake work-around, so never enable it in that case. Might be better to completely remove the work-around from the kernel in this case? Signed-off-by: Keith Packard Reviewed-by: Ben Widawsky diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index 3a8d448..c92424c 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -1186,10 +1186,11 @@ static void gen6_cleanup(void) /* Certain Gen5 chipsets require require idling the GPU before * unmapping anything from the GTT when VT-d is enabled. */ -extern int intel_iommu_gfx_mapped; static inline int needs_idle_maps(void) { +#ifdef CONFIG_INTEL_IOMMU const unsigned short gpu_devid = intel_private.pcidev->device; + extern int intel_iommu_gfx_mapped; /* Query intel_iommu to see if we need the workaround. Presumably that * was loaded first. @@ -1198,7 +1199,7 @@ static inline int needs_idle_maps(void) gpu_devid == PCI_DEVICE_ID_INTEL_IRONLAKE_M_IG) && intel_iommu_gfx_mapped) return 1; - +#endif return 0; } -- cgit v0.10.2 From 0d52f54e2ef64c189dedc332e680b2eb4a34590a Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 22 Oct 2011 00:43:38 +0200 Subject: PCI / ACPI: Make acpiphp ignore root bridges using PCIe native hotplug If the kernel has requested control of the PCIe native hotplug feature for a given root complex, the acpiphp driver should not try to handle that root complex and it should leave it to pciehp. Failing to do so causes problems to happen if acpiphp is loaded before pciehp on such systems. To address this issue make find_root_bridges() ignore PCIe root complexes with PCIe native hotplug enabled and make add_bridge() return error code if PCIe native hotplug is enabled for the given root port. This causes acpiphp to refuse to load if PCIe native hotplug is enabled for all complexes and to refuse binding to the root complexes with PCIe native hotplug is enabled. Acked-by: Kenji Kaneshige Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 596172b..fce1c54 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -459,8 +459,17 @@ static int add_bridge(acpi_handle handle) { acpi_status status; unsigned long long tmp; + struct acpi_pci_root *root; acpi_handle dummy_handle; + /* + * We shouldn't use this bridge if PCIe native hotplug control has been + * granted by the BIOS for it. + */ + root = acpi_pci_find_root(handle); + if (root && (root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL)) + return -ENODEV; + /* if the bridge doesn't have _STA, we assume it is always there */ status = acpi_get_handle(handle, "_STA", &dummy_handle); if (ACPI_SUCCESS(status)) { @@ -1376,13 +1385,23 @@ static void handle_hotplug_event_func(acpi_handle handle, u32 type, static acpi_status find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv) { + struct acpi_pci_root *root; int *count = (int *)context; - if (acpi_is_root_bridge(handle)) { - acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY, - handle_hotplug_event_bridge, NULL); - (*count)++; - } + if (!acpi_is_root_bridge(handle)) + return AE_OK; + + root = acpi_pci_find_root(handle); + if (!root) + return AE_OK; + + if (root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL) + return AE_OK; + + (*count)++; + acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY, + handle_hotplug_event_bridge, NULL); + return AE_OK ; } -- cgit v0.10.2 From 466b3ddfbcf4f5ce402a77397630a0fa9ea9ce6b Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Sun, 30 Oct 2011 16:35:08 +0100 Subject: PCI: Fix compile errors with PCI_ATS and !PCI_IOV The ats and sroiv members of 'struct pci_dev' are required for the ATS code already, even without IOV support compiled in. So depend on ATS here. This is fine with PCI_IOV too because it selects PCI_ATS. Also the prototypes for ATS need to be available for PCI_ATS. Reported-by: Randy Dunlap Signed-off-by: Joerg Roedel Signed-off-by: Jesse Barnes diff --git a/include/linux/pci-ats.h b/include/linux/pci-ats.h index e3d0b38..7ef6872 100644 --- a/include/linux/pci-ats.h +++ b/include/linux/pci-ats.h @@ -12,7 +12,7 @@ struct pci_ats { unsigned int is_enabled:1; /* Enable bit is set */ }; -#ifdef CONFIG_PCI_IOV +#ifdef CONFIG_PCI_ATS extern int pci_enable_ats(struct pci_dev *dev, int ps); extern void pci_disable_ats(struct pci_dev *dev); @@ -29,7 +29,7 @@ static inline int pci_ats_enabled(struct pci_dev *dev) return dev->ats && dev->ats->is_enabled; } -#else /* CONFIG_PCI_IOV */ +#else /* CONFIG_PCI_ATS */ static inline int pci_enable_ats(struct pci_dev *dev, int ps) { @@ -50,7 +50,7 @@ static inline int pci_ats_enabled(struct pci_dev *dev) return 0; } -#endif /* CONFIG_PCI_IOV */ +#endif /* CONFIG_PCI_ATS */ #ifdef CONFIG_PCI_PRI diff --git a/include/linux/pci.h b/include/linux/pci.h index 337df0d..7cda65b 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -338,7 +338,7 @@ struct pci_dev { struct list_head msi_list; #endif struct pci_vpd *vpd; -#ifdef CONFIG_PCI_IOV +#ifdef CONFIG_PCI_ATS union { struct pci_sriov *sriov; /* SR-IOV capability related */ struct pci_dev *physfn; /* the PF this VF is associated with */ -- cgit v0.10.2 From c54420d3302d30999060e2669d0800b85e5b5a20 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Sun, 30 Oct 2011 16:35:07 +0100 Subject: PCI: Let PCI_PRI depend on PCI This avoids the PCI_PRI question in 'make config' when PCI is not selected. Reported-by: Geert Uytterhoeven Signed-off-by: Joerg Roedel Signed-off-by: Jesse Barnes diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index cec6606..8252fc3 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -87,6 +87,7 @@ config PCI_IOV config PCI_PRI bool "PCI PRI support" + depends on PCI select PCI_ATS help PRI is the PCI Page Request Interface. It allows PCI devices that are -- cgit v0.10.2 From 627f7675f0f530ea555d76543dc4e469d70a1532 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Mon, 31 Oct 2011 11:30:10 -0700 Subject: drm/i915: Use mode_config.mutex in ironlake_panel_vdd_work Use of the struct_mutex is not correct for locking in mode setting paths. Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index fc1a083..7259034 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -971,9 +971,9 @@ static void ironlake_panel_vdd_work(struct work_struct *__work) struct intel_dp, panel_vdd_work); struct drm_device *dev = intel_dp->base.base.dev; - mutex_lock(&dev->struct_mutex); + mutex_lock(&dev->mode_config.mutex); ironlake_panel_vdd_off_sync(intel_dp); - mutex_unlock(&dev->struct_mutex); + mutex_unlock(&dev->mode_config.mutex); } static void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync) -- cgit v0.10.2 From ff56b0bc84c01fb2c5d2ec6438becfe0f5f2f78f Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Mon, 31 Oct 2011 23:16:21 -0700 Subject: drm/i915: Fix object refcount leak on mmappable size limit error path. I've been seeing memory leaks on my system in the form of large (300-400MB) GEM objects created by now-dead processes laying around clogging up memory. I usually notice when it gets to about 1.2GB of them. Hopefully this clears up the issue, but I just found this bug by inspection. Signed-off-by: Eric Anholt Cc: stable@kernel.org Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 6651c36..d18b07a 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1396,7 +1396,7 @@ i915_gem_mmap_gtt(struct drm_file *file, if (obj->base.size > dev_priv->mm.gtt_mappable_end) { ret = -E2BIG; - goto unlock; + goto out; } if (obj->madv != I915_MADV_WILLNEED) { -- cgit v0.10.2 From f43d623164022dcbf6750ef220b7a1133a1183eb Mon Sep 17 00:00:00 2001 From: Don Zickus Date: Thu, 20 Oct 2011 23:52:14 -0400 Subject: usb, xhci: fix lockdep warning on endpoint timeout While debugging a usb3 problem, I stumbled upon this lockdep warning. Oct 18 21:41:17 dhcp47-74 kernel: ================================= Oct 18 21:41:17 dhcp47-74 kernel: [ INFO: inconsistent lock state ] Oct 18 21:41:17 dhcp47-74 kernel: 3.1.0-rc4nmi+ #456 Oct 18 21:41:17 dhcp47-74 kernel: --------------------------------- Oct 18 21:41:17 dhcp47-74 kernel: inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. Oct 18 21:41:17 dhcp47-74 kernel: swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes: Oct 18 21:41:17 dhcp47-74 kernel: (&(&xhci->lock)->rlock){?.-...}, at: [] xhci_stop_endpoint_command_watchdog+0x30/0x340 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: {IN-HARDIRQ-W} state was registered at: Oct 18 21:41:17 dhcp47-74 kernel: [] __lock_acquire+0x781/0x1660 Oct 18 21:41:17 dhcp47-74 kernel: [] lock_acquire+0x97/0x170 Oct 18 21:41:17 dhcp47-74 kernel: [] _raw_spin_lock+0x46/0x80 Oct 18 21:41:17 dhcp47-74 kernel: [] xhci_irq+0x3a/0x1960 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: [] xhci_msi_irq+0x31/0x40 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: [] handle_irq_event_percpu+0x85/0x320 Oct 18 21:41:17 dhcp47-74 kernel: [] handle_irq_event+0x48/0x70 Oct 18 21:41:17 dhcp47-74 kernel: [] handle_edge_irq+0x6d/0x130 Oct 18 21:41:17 dhcp47-74 kernel: [] handle_irq+0x49/0xa0 Oct 18 21:41:17 dhcp47-74 kernel: [] do_IRQ+0x5d/0xe0 Oct 18 21:41:17 dhcp47-74 kernel: [] ret_from_intr+0x0/0x13 Oct 18 21:41:17 dhcp47-74 kernel: [] usb_set_device_state+0x8a/0x180 Oct 18 21:41:17 dhcp47-74 kernel: [] usb_add_hcd+0x2b8/0x730 Oct 18 21:41:17 dhcp47-74 kernel: [] xhci_pci_probe+0x9e/0xd4 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: [] local_pci_probe+0x5f/0xd0 Oct 18 21:41:17 dhcp47-74 kernel: [] pci_device_probe+0x119/0x120 Oct 18 21:41:17 dhcp47-74 kernel: [] driver_probe_device+0xa3/0x2c0 Oct 18 21:41:17 dhcp47-74 kernel: [] __driver_attach+0xab/0xb0 Oct 18 21:41:17 dhcp47-74 kernel: [] bus_for_each_dev+0x6c/0xa0 Oct 18 21:41:17 dhcp47-74 kernel: [] driver_attach+0x1e/0x20 Oct 18 21:41:17 dhcp47-74 kernel: [] bus_add_driver+0x1f8/0x2b0 Oct 18 21:41:17 dhcp47-74 kernel: [] driver_register+0x76/0x140 Oct 18 21:41:17 dhcp47-74 kernel: [] __pci_register_driver+0x66/0xe0 Oct 18 21:41:17 dhcp47-74 kernel: [] snd_timer_find+0x4a/0x70 [snd_timer] Oct 18 21:41:17 dhcp47-74 kernel: [] snd_timer_find+0xe/0x70 [snd_timer] Oct 18 21:41:17 dhcp47-74 kernel: [] do_one_initcall+0x43/0x180 Oct 18 21:41:17 dhcp47-74 kernel: [] sys_init_module+0x92/0x1f0 Oct 18 21:41:17 dhcp47-74 kernel: [] system_call_fastpath+0x16/0x1b Oct 18 21:41:17 dhcp47-74 kernel: irq event stamp: 631984 Oct 18 21:41:17 dhcp47-74 kernel: hardirqs last enabled at (631984): [] _raw_spin_unlock_irq+0x30/0x50 Oct 18 21:41:17 dhcp47-74 kernel: hardirqs last disabled at (631983): [] _raw_spin_lock_irq+0x19/0x90 Oct 18 21:41:17 dhcp47-74 kernel: softirqs last enabled at (631980): [] _local_bh_enable+0x13/0x20 Oct 18 21:41:17 dhcp47-74 kernel: softirqs last disabled at (631981): [] call_softirq+0x1c/0x30 Oct 18 21:41:17 dhcp47-74 kernel: Oct 18 21:41:17 dhcp47-74 kernel: other info that might help us debug this: Oct 18 21:41:17 dhcp47-74 kernel: Possible unsafe locking scenario: Oct 18 21:41:17 dhcp47-74 kernel: Oct 18 21:41:17 dhcp47-74 kernel: CPU0 Oct 18 21:41:17 dhcp47-74 kernel: ---- Oct 18 21:41:17 dhcp47-74 kernel: lock(&(&xhci->lock)->rlock); Oct 18 21:41:17 dhcp47-74 kernel: Oct 18 21:41:17 dhcp47-74 kernel: lock(&(&xhci->lock)->rlock); Oct 18 21:41:17 dhcp47-74 kernel: Oct 18 21:41:17 dhcp47-74 kernel: *** DEADLOCK *** Oct 18 21:41:17 dhcp47-74 kernel: Oct 18 21:41:17 dhcp47-74 kernel: 1 lock held by swapper/0: Oct 18 21:41:17 dhcp47-74 kernel: #0: (&ep->stop_cmd_timer){+.-...}, at: [] run_timer_softirq+0x162/0x570 Oct 18 21:41:17 dhcp47-74 kernel: Oct 18 21:41:17 dhcp47-74 kernel: stack backtrace: Oct 18 21:41:17 dhcp47-74 kernel: Pid: 0, comm: swapper Tainted: G W 3.1.0-rc4nmi+ #456 Oct 18 21:41:17 dhcp47-74 kernel: Call Trace: Oct 18 21:41:17 dhcp47-74 kernel: [] print_usage_bug+0x227/0x270 Oct 18 21:41:17 dhcp47-74 kernel: [] mark_lock+0x346/0x410 Oct 18 21:41:17 dhcp47-74 kernel: [] __lock_acquire+0x61e/0x1660 Oct 18 21:41:17 dhcp47-74 kernel: [] ? mark_lock+0x213/0x410 Oct 18 21:41:17 dhcp47-74 kernel: [] lock_acquire+0x97/0x170 Oct 18 21:41:17 dhcp47-74 kernel: [] ? xhci_stop_endpoint_command_watchdog+0x30/0x340 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: [] _raw_spin_lock+0x46/0x80 Oct 18 21:41:17 dhcp47-74 kernel: [] ? xhci_stop_endpoint_command_watchdog+0x30/0x340 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: [] xhci_stop_endpoint_command_watchdog+0x30/0x340 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: [] ? run_timer_softirq+0x162/0x570 Oct 18 21:41:17 dhcp47-74 kernel: [] run_timer_softirq+0x20d/0x570 Oct 18 21:41:17 dhcp47-74 kernel: [] ? run_timer_softirq+0x162/0x570 Oct 18 21:41:17 dhcp47-74 kernel: [] ? xhci_queue_isoc_tx_prepare+0x8e0/0x8e0 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: [] __do_softirq+0xf2/0x3f0 Oct 18 21:41:17 dhcp47-74 kernel: [] ? lapic_next_event+0x1d/0x30 Oct 18 21:41:17 dhcp47-74 kernel: [] ? clockevents_program_event+0x5e/0x90 Oct 18 21:41:17 dhcp47-74 kernel: [] call_softirq+0x1c/0x30 Oct 18 21:41:17 dhcp47-74 kernel: [] do_softirq+0x8d/0xc0 Oct 18 21:41:17 dhcp47-74 kernel: [] irq_exit+0xe5/0x100 Oct 18 21:41:17 dhcp47-74 kernel: [] smp_apic_timer_interrupt+0x6e/0x99 Oct 18 21:41:17 dhcp47-74 kernel: [] apic_timer_interrupt+0x70/0x80 Oct 18 21:41:17 dhcp47-74 kernel: [] ? trace_hardirqs_off+0xd/0x10 Oct 18 21:41:17 dhcp47-74 kernel: [] ? acpi_idle_enter_bm+0x227/0x25b Oct 18 21:41:17 dhcp47-74 kernel: [] ? acpi_idle_enter_bm+0x222/0x25b Oct 18 21:41:17 dhcp47-74 kernel: [] cpuidle_idle_call+0x103/0x290 Oct 18 21:41:17 dhcp47-74 kernel: [] cpu_idle+0xe5/0x160 Oct 18 21:41:17 dhcp47-74 kernel: [] rest_init+0xe0/0xf0 Oct 18 21:41:17 dhcp47-74 kernel: [] ? csum_partial_copy_generic+0x170/0x170 Oct 18 21:41:17 dhcp47-74 kernel: [] start_kernel+0x3fc/0x407 Oct 18 21:41:17 dhcp47-74 kernel: [] x86_64_start_reservations+0x131/0x135 Oct 18 21:41:17 dhcp47-74 kernel: [] x86_64_start_kernel+0xed/0xf4 Oct 18 21:41:17 dhcp47-74 kernel: xhci_hcd 0000:00:14.0: xHCI host not responding to stop endpoint command. Oct 18 21:41:17 dhcp47-74 kernel: xhci_hcd 0000:00:14.0: Assuming host is dying, halting host. Oct 18 21:41:17 dhcp47-74 kernel: xhci_hcd 0000:00:14.0: HC died; cleaning up Oct 18 21:41:17 dhcp47-74 kernel: usb 3-4: device descriptor read/8, error -110 Oct 18 21:41:17 dhcp47-74 kernel: usb 3-4: device descriptor read/8, error -22 Oct 18 21:41:17 dhcp47-74 kernel: hub 3-0:1.0: cannot disable port 4 (err = -19) Basically what is happening is in xhci_stop_endpoint_command_watchdog() the xhci->lock is grabbed with just spin_lock. What lockdep deduces is that if an interrupt occurred while in this function it would deadlock with xhci_irq because that function also grabs the xhci->lock. Fixing it is trivial by using spin_lock_irqsave instead. This should be queued to stable kernels as far back as 2.6.33. Signed-off-by: Don Zickus Signed-off-by: Sarah Sharp Cc: stable@kernel.org diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 940321b..9f1d4b1 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -816,23 +816,24 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) struct xhci_ring *ring; struct xhci_td *cur_td; int ret, i, j; + unsigned long flags; ep = (struct xhci_virt_ep *) arg; xhci = ep->xhci; - spin_lock(&xhci->lock); + spin_lock_irqsave(&xhci->lock, flags); ep->stop_cmds_pending--; if (xhci->xhc_state & XHCI_STATE_DYING) { xhci_dbg(xhci, "Stop EP timer ran, but another timer marked " "xHCI as DYING, exiting.\n"); - spin_unlock(&xhci->lock); + spin_unlock_irqrestore(&xhci->lock, flags); return; } if (!(ep->stop_cmds_pending == 0 && (ep->ep_state & EP_HALT_PENDING))) { xhci_dbg(xhci, "Stop EP timer ran, but no command pending, " "exiting.\n"); - spin_unlock(&xhci->lock); + spin_unlock_irqrestore(&xhci->lock, flags); return; } @@ -844,11 +845,11 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) xhci->xhc_state |= XHCI_STATE_DYING; /* Disable interrupts from the host controller and start halting it */ xhci_quiesce(xhci); - spin_unlock(&xhci->lock); + spin_unlock_irqrestore(&xhci->lock, flags); ret = xhci_halt(xhci); - spin_lock(&xhci->lock); + spin_lock_irqsave(&xhci->lock, flags); if (ret < 0) { /* This is bad; the host is not responding to commands and it's * not allowing itself to be halted. At least interrupts are @@ -896,7 +897,7 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) } } } - spin_unlock(&xhci->lock); + spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg(xhci, "Calling usb_hc_died()\n"); usb_hc_died(xhci_to_hcd(xhci)->primary_hcd); xhci_dbg(xhci, "xHCI host controller is dead.\n"); -- cgit v0.10.2 From 616fdb5afb12b4d5bb9e36df40d039e86aaaefc2 Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Wed, 5 Oct 2011 11:44:54 -0700 Subject: drm/i915: forcewake warning fixes in debugfs Some more unsafe debugfs access are fixed with this patch. I tested all reads, but didn't thoroughly test the writes. Cc: "Nicolas Kalkhof" Signed-off-by: Ben Widawsky Reviewed-by: Daniel Vetter Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 8e95d66..f2e0207 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -635,11 +635,16 @@ static int i915_ringbuffer_info(struct seq_file *m, void *data) struct drm_device *dev = node->minor->dev; drm_i915_private_t *dev_priv = dev->dev_private; struct intel_ring_buffer *ring; + int ret; ring = &dev_priv->ring[(uintptr_t)node->info_ent->data]; if (ring->size == 0) return 0; + ret = mutex_lock_interruptible(&dev->struct_mutex); + if (ret) + return ret; + seq_printf(m, "Ring %s:\n", ring->name); seq_printf(m, " Head : %08x\n", I915_READ_HEAD(ring) & HEAD_ADDR); seq_printf(m, " Tail : %08x\n", I915_READ_TAIL(ring) & TAIL_ADDR); @@ -653,6 +658,8 @@ static int i915_ringbuffer_info(struct seq_file *m, void *data) seq_printf(m, " Control : %08x\n", I915_READ_CTL(ring)); seq_printf(m, " Start : %08x\n", I915_READ_START(ring)); + mutex_unlock(&dev->struct_mutex); + return 0; } @@ -841,7 +848,16 @@ static int i915_rstdby_delays(struct seq_file *m, void *unused) struct drm_info_node *node = (struct drm_info_node *) m->private; struct drm_device *dev = node->minor->dev; drm_i915_private_t *dev_priv = dev->dev_private; - u16 crstanddelay = I915_READ16(CRSTANDVID); + u16 crstanddelay; + int ret; + + ret = mutex_lock_interruptible(&dev->struct_mutex); + if (ret) + return ret; + + crstanddelay = I915_READ16(CRSTANDVID); + + mutex_unlock(&dev->struct_mutex); seq_printf(m, "w/ctx: %d, w/o ctx: %d\n", (crstanddelay >> 8) & 0x3f, (crstanddelay & 0x3f)); @@ -939,7 +955,11 @@ static int i915_delayfreq_table(struct seq_file *m, void *unused) struct drm_device *dev = node->minor->dev; drm_i915_private_t *dev_priv = dev->dev_private; u32 delayfreq; - int i; + int ret, i; + + ret = mutex_lock_interruptible(&dev->struct_mutex); + if (ret) + return ret; for (i = 0; i < 16; i++) { delayfreq = I915_READ(PXVFREQ_BASE + i * 4); @@ -947,6 +967,8 @@ static int i915_delayfreq_table(struct seq_file *m, void *unused) (delayfreq & PXVFREQ_PX_MASK) >> PXVFREQ_PX_SHIFT); } + mutex_unlock(&dev->struct_mutex); + return 0; } @@ -961,13 +983,19 @@ static int i915_inttoext_table(struct seq_file *m, void *unused) struct drm_device *dev = node->minor->dev; drm_i915_private_t *dev_priv = dev->dev_private; u32 inttoext; - int i; + int ret, i; + + ret = mutex_lock_interruptible(&dev->struct_mutex); + if (ret) + return ret; for (i = 1; i <= 32; i++) { inttoext = I915_READ(INTTOEXT_BASE_ILK + i * 4); seq_printf(m, "INTTOEXT%02d: 0x%08x\n", i, inttoext); } + mutex_unlock(&dev->struct_mutex); + return 0; } @@ -976,9 +1004,19 @@ static int i915_drpc_info(struct seq_file *m, void *unused) struct drm_info_node *node = (struct drm_info_node *) m->private; struct drm_device *dev = node->minor->dev; drm_i915_private_t *dev_priv = dev->dev_private; - u32 rgvmodectl = I915_READ(MEMMODECTL); - u32 rstdbyctl = I915_READ(RSTDBYCTL); - u16 crstandvid = I915_READ16(CRSTANDVID); + u32 rgvmodectl, rstdbyctl; + u16 crstandvid; + int ret; + + ret = mutex_lock_interruptible(&dev->struct_mutex); + if (ret) + return ret; + + rgvmodectl = I915_READ(MEMMODECTL); + rstdbyctl = I915_READ(RSTDBYCTL); + crstandvid = I915_READ16(CRSTANDVID); + + mutex_unlock(&dev->struct_mutex); seq_printf(m, "HD boost: %s\n", (rgvmodectl & MEMMODE_BOOST_EN) ? "yes" : "no"); @@ -1166,9 +1204,16 @@ static int i915_gfxec(struct seq_file *m, void *unused) struct drm_info_node *node = (struct drm_info_node *) m->private; struct drm_device *dev = node->minor->dev; drm_i915_private_t *dev_priv = dev->dev_private; + int ret; + + ret = mutex_lock_interruptible(&dev->struct_mutex); + if (ret) + return ret; seq_printf(m, "GFXEC: %ld\n", (unsigned long)I915_READ(0x112f4)); + mutex_unlock(&dev->struct_mutex); + return 0; } -- cgit v0.10.2 From 775d17b6ca4357048f36c22151335addfe15db4b Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sun, 9 Oct 2011 21:52:01 +0200 Subject: drm/i915: Ivybridge still has fences! So don't forget to restore them on resume and dump them into the error state. Cc: stable@kernel.org Signed-off-by: Daniel Vetter Reviewed-by: Chris Wilson Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 9ee2729..b40004b 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -824,6 +824,7 @@ static void i915_gem_record_fences(struct drm_device *dev, /* Fences */ switch (INTEL_INFO(dev)->gen) { + case 7: case 6: for (i = 0; i < 16; i++) error->fence[i] = I915_READ64(FENCE_REG_SANDYBRIDGE_0 + (i * 8)); diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index f8f602d..7886e4f 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -370,6 +370,7 @@ static void i915_save_modeset_reg(struct drm_device *dev) /* Fences */ switch (INTEL_INFO(dev)->gen) { + case 7: case 6: for (i = 0; i < 16; i++) dev_priv->saveFENCE[i] = I915_READ64(FENCE_REG_SANDYBRIDGE_0 + (i * 8)); @@ -404,6 +405,7 @@ static void i915_restore_modeset_reg(struct drm_device *dev) /* Fences */ switch (INTEL_INFO(dev)->gen) { + case 7: case 6: for (i = 0; i < 16; i++) I915_WRITE64(FENCE_REG_SANDYBRIDGE_0 + (i * 8), dev_priv->saveFENCE[i]); -- cgit v0.10.2 From 4b9de737fad5bd8993e6070530802de22f32744d Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sun, 9 Oct 2011 21:52:02 +0200 Subject: drm/i915: add constants to size fence arrays and fields In preparation of to support 32 fences on Ivybdrigde. Signed-Off-by: Daniel Vetter Reviewed-by: Chris Wilson Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 06a37f4..d2da91f 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -126,6 +126,9 @@ struct drm_i915_master_private { struct _drm_i915_sarea *sarea_priv; }; #define I915_FENCE_REG_NONE -1 +#define I915_MAX_NUM_FENCES 16 +/* 16 fences + sign bit for FENCE_REG_NONE */ +#define I915_MAX_NUM_FENCE_BITS 5 struct drm_i915_fence_reg { struct list_head lru_list; @@ -168,7 +171,7 @@ struct drm_i915_error_state { u32 instdone1; u32 seqno; u64 bbaddr; - u64 fence[16]; + u64 fence[I915_MAX_NUM_FENCES]; struct timeval time; struct drm_i915_error_object { int page_count; @@ -182,7 +185,7 @@ struct drm_i915_error_state { u32 gtt_offset; u32 read_domains; u32 write_domain; - s32 fence_reg:5; + s32 fence_reg:I915_MAX_NUM_FENCE_BITS; s32 pinned:2; u32 tiling:2; u32 dirty:1; @@ -375,7 +378,7 @@ typedef struct drm_i915_private { struct notifier_block lid_notifier; int crt_ddc_pin; - struct drm_i915_fence_reg fence_regs[16]; /* assume 965 */ + struct drm_i915_fence_reg fence_regs[I915_MAX_NUM_FENCES]; /* assume 965 */ int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */ int num_fence_regs; /* 8 on pre-965, 16 otherwise */ @@ -506,7 +509,7 @@ typedef struct drm_i915_private { u8 saveAR[21]; u8 saveDACMASK; u8 saveCR[37]; - uint64_t saveFENCE[16]; + uint64_t saveFENCE[I915_MAX_NUM_FENCES]; u32 saveCURACNTR; u32 saveCURAPOS; u32 saveCURABASE; @@ -777,10 +780,8 @@ struct drm_i915_gem_object { * Fence register bits (if any) for this object. Will be set * as needed when mapped into the GTT. * Protected by dev->struct_mutex. - * - * Size: 4 bits for 16 fences + sign (for FENCE_REG_NONE) */ - signed int fence_reg:5; + signed int fence_reg:I915_MAX_NUM_FENCE_BITS; /** * Advice: are the backing pages purgeable? diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index d18b07a..a838597 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1745,7 +1745,7 @@ static void i915_gem_reset_fences(struct drm_device *dev) struct drm_i915_private *dev_priv = dev->dev_private; int i; - for (i = 0; i < 16; i++) { + for (i = 0; i < dev_priv->num_fence_regs; i++) { struct drm_i915_fence_reg *reg = &dev_priv->fence_regs[i]; struct drm_i915_gem_object *obj = reg->obj; @@ -3877,7 +3877,7 @@ i915_gem_load(struct drm_device *dev) INIT_LIST_HEAD(&dev_priv->mm.gtt_list); for (i = 0; i < I915_NUM_RINGS; i++) init_ring_lists(&dev_priv->ring[i]); - for (i = 0; i < 16; i++) + for (i = 0; i < I915_MAX_NUM_FENCES; i++) INIT_LIST_HEAD(&dev_priv->fence_regs[i].lru_list); INIT_DELAYED_WORK(&dev_priv->mm.retire_work, i915_gem_retire_work_handler); -- cgit v0.10.2 From a9866a0975881ba5e819b0a02324ba683b5cdb81 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Fri, 21 Oct 2011 11:53:34 +0800 Subject: MAINTAINERS: add ARM/FREESCALE MXS entry As suggested by Pengutronix, they want to get Sascha relieved from the burden of maintaining MXS sub-architecture. Since I brought the most of MXS core code to mainline (with the great help from Pengutronix people, thanks!), I would like to step up for maintaining MXS. Signed-off-by: Shawn Guo Acked-by: Sascha Hauer diff --git a/MAINTAINERS b/MAINTAINERS index ab77670..8fe3f01 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -804,6 +804,13 @@ S: Maintained T: git git://git.linaro.org/people/shawnguo/linux-2.6.git F: arch/arm/mach-imx/*imx6* +ARM/FREESCALE MXS ARM ARCHITECTURE +M: Shawn Guo +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +T: git git://git.linaro.org/people/shawnguo/linux-2.6.git +F: arch/arm/mach-mxs/ + ARM/GLOMATION GESBC9312SX MACHINE SUPPORT M: Lennert Buytenhek L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -- cgit v0.10.2 From 680da876f44a644aee891e1d0df5a560cfa4720e Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 3 Nov 2011 14:15:13 -0700 Subject: drm/i915: enable cacheable objects on Ivybridge IVB supports these bits as well. Signed-off-by: Jesse Barnes Reviewed-by: Daniel Vetter Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index a838597..ed0b68f 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3613,7 +3613,7 @@ struct drm_i915_gem_object *i915_gem_alloc_object(struct drm_device *dev, obj->base.write_domain = I915_GEM_DOMAIN_CPU; obj->base.read_domains = I915_GEM_DOMAIN_CPU; - if (IS_GEN6(dev)) { + if (IS_GEN6(dev) || IS_GEN7(dev)) { /* On Gen6, we can have the GPU use the LLC (the CPU * cache) for about a 10% performance improvement * compared to uncached. Graphics requests other than -- cgit v0.10.2 From d31c285b3a71cf9056e6a060de41f37780b0af86 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Thu, 3 Nov 2011 13:06:08 -0700 Subject: xhci: Set slot and ep0 flags for address command. Matt's AsMedia xHCI host controller was responding with a Context Error to an address device command after a configured device reset. Some sequence of events leads both the slot and endpoint zero add flags cleared to zero, which the AsMedia host doesn't like: [ 223.701839] xhci_hcd 0000:03:00.0: Slot ID 1 Input Context: [ 223.701841] xhci_hcd 0000:03:00.0: @ffff880137b25000 (virt) @ffffc000 (dma) 0x000000 - drop flags [ 223.701843] xhci_hcd 0000:03:00.0: @ffff880137b25004 (virt) @ffffc004 (dma) 0x000000 - add flags [ 223.701846] xhci_hcd 0000:03:00.0: @ffff880137b25008 (virt) @ffffc008 (dma) 0x000000 - rsvd2[0] [ 223.701848] xhci_hcd 0000:03:00.0: @ffff880137b2500c (virt) @ffffc00c (dma) 0x000000 - rsvd2[1] [ 223.701850] xhci_hcd 0000:03:00.0: @ffff880137b25010 (virt) @ffffc010 (dma) 0x000000 - rsvd2[2] [ 223.701852] xhci_hcd 0000:03:00.0: @ffff880137b25014 (virt) @ffffc014 (dma) 0x000000 - rsvd2[3] [ 223.701854] xhci_hcd 0000:03:00.0: @ffff880137b25018 (virt) @ffffc018 (dma) 0x000000 - rsvd2[4] [ 223.701857] xhci_hcd 0000:03:00.0: @ffff880137b2501c (virt) @ffffc01c (dma) 0x000000 - rsvd2[5] [ 223.701858] xhci_hcd 0000:03:00.0: Slot Context: [ 223.701860] xhci_hcd 0000:03:00.0: @ffff880137b25020 (virt) @ffffc020 (dma) 0x8400000 - dev_info [ 223.701862] xhci_hcd 0000:03:00.0: @ffff880137b25024 (virt) @ffffc024 (dma) 0x010000 - dev_info2 [ 223.701864] xhci_hcd 0000:03:00.0: @ffff880137b25028 (virt) @ffffc028 (dma) 0x000000 - tt_info [ 223.701866] xhci_hcd 0000:03:00.0: @ffff880137b2502c (virt) @ffffc02c (dma) 0x000000 - dev_state [ 223.701869] xhci_hcd 0000:03:00.0: @ffff880137b25030 (virt) @ffffc030 (dma) 0x000000 - rsvd[0] [ 223.701871] xhci_hcd 0000:03:00.0: @ffff880137b25034 (virt) @ffffc034 (dma) 0x000000 - rsvd[1] [ 223.701873] xhci_hcd 0000:03:00.0: @ffff880137b25038 (virt) @ffffc038 (dma) 0x000000 - rsvd[2] [ 223.701875] xhci_hcd 0000:03:00.0: @ffff880137b2503c (virt) @ffffc03c (dma) 0x000000 - rsvd[3] [ 223.701877] xhci_hcd 0000:03:00.0: Endpoint 00 Context: [ 223.701879] xhci_hcd 0000:03:00.0: @ffff880137b25040 (virt) @ffffc040 (dma) 0x000000 - ep_info [ 223.701881] xhci_hcd 0000:03:00.0: @ffff880137b25044 (virt) @ffffc044 (dma) 0x2000026 - ep_info2 [ 223.701883] xhci_hcd 0000:03:00.0: @ffff880137b25048 (virt) @ffffc048 (dma) 0xffffe8e0 - deq [ 223.701885] xhci_hcd 0000:03:00.0: @ffff880137b25050 (virt) @ffffc050 (dma) 0x000000 - tx_info [ 223.701887] xhci_hcd 0000:03:00.0: @ffff880137b25054 (virt) @ffffc054 (dma) 0x000000 - rsvd[0] [ 223.701889] xhci_hcd 0000:03:00.0: @ffff880137b25058 (virt) @ffffc058 (dma) 0x000000 - rsvd[1] [ 223.701892] xhci_hcd 0000:03:00.0: @ffff880137b2505c (virt) @ffffc05c (dma) 0x000000 - rsvd[2] ... [ 223.701927] xhci_hcd 0000:03:00.0: // Ding dong! [ 223.701992] xhci_hcd 0000:03:00.0: Setup ERROR: address device command for slot 1. The xHCI spec says that both flags must be set to one for the Address Device command. When the device is first enumerated, xhci_setup_addressable_virt_dev() does set those flags. However, when the device is addressed after it has been reset in the configured state, xhci_setup_addressable_virt_dev() is not called, and xhci_copy_ep0_dequeue_into_input_ctx() is called instead. That function relies on the flags being set up by previous commands, which apparently isn't a good assumption. Move the setting of the flags into the common parent function. This should be queued for stable kernels as old as 2.6.35, since that was the first introduction of xhci_copy_ep0_dequeue_into_input_ctx. Signed-off-by: Sarah Sharp Tested-by: Matt Cc: stable@vger.kernel.org diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 42a22b8..0e4b25f 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -982,7 +982,6 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud struct xhci_virt_device *dev; struct xhci_ep_ctx *ep0_ctx; struct xhci_slot_ctx *slot_ctx; - struct xhci_input_control_ctx *ctrl_ctx; u32 port_num; struct usb_device *top_dev; @@ -994,12 +993,8 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud return -EINVAL; } ep0_ctx = xhci_get_ep_ctx(xhci, dev->in_ctx, 0); - ctrl_ctx = xhci_get_input_control_ctx(xhci, dev->in_ctx); slot_ctx = xhci_get_slot_ctx(xhci, dev->in_ctx); - /* 2) New slot context and endpoint 0 context are valid*/ - ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG); - /* 3) Only the control endpoint is valid - one endpoint context */ slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1) | udev->route); switch (udev->speed) { diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 1ff95a0..747c5ea 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3504,6 +3504,10 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) /* Otherwise, update the control endpoint ring enqueue pointer. */ else xhci_copy_ep0_dequeue_into_input_ctx(xhci, udev); + ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); + ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG); + ctrl_ctx->drop_flags = 0; + xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id); xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2); @@ -3585,7 +3589,6 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) virt_dev->address = (le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK) + 1; /* Zero the input context control for later use */ - ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); ctrl_ctx->add_flags = 0; ctrl_ctx->drop_flags = 0; -- cgit v0.10.2 From 79c3dd8150fd5236d95766a9e662e3e932b462c9 Mon Sep 17 00:00:00 2001 From: Don Zickus Date: Thu, 3 Nov 2011 09:07:18 -0400 Subject: usb, xhci: Clear warm reset change event during init I noticed on my Panther Point system that I wasn't getting hotplug events for my usb3.0 disk on a usb3 port. I tracked it down to the fact that the system had the warm reset change bit still set. This seemed to block future events from being received, including a hotplug event. Clearing this bit during initialization allowed the hotplug event to be received and the disk to be recognized correctly. This patch should be backported to kernels as old as 2.6.39. Signed-off-by: Don Zickus Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 96f05b2..7978146 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -813,6 +813,12 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) USB_PORT_FEAT_C_PORT_LINK_STATE); } + if ((portchange & USB_PORT_STAT_C_BH_RESET) && + hub_is_superspeed(hub->hdev)) { + need_debounce_delay = true; + clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_BH_PORT_RESET); + } /* We can forget about a "removed" device when there's a * physical disconnect or the connect status changes. */ -- cgit v0.10.2 From 1788ea6e3b2a58cf4fb00206e362d9caff8d86a7 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 4 Nov 2011 13:31:21 -0400 Subject: nfs: when attempting to open a directory, fall back on normal lookup (try #5) commit d953126 changed how nfs_atomic_lookup handles an -EISDIR return from an OPEN call. Prior to that patch, that caused the client to fall back to doing a normal lookup. When that patch went in, the code began returning that error to userspace. The d_revalidate codepath however never had the corresponding change, so it was still possible to end up with a NULL ctx->state pointer after that. That patch caused a regression. When we attempt to open a directory that does not have a cached dentry, that open now errors out with EISDIR. If you attempt the same open with a cached dentry, it will succeed. Fix this by reverting the change in nfs_atomic_lookup and allowing attempts to open directories to fall back to a normal lookup Also, add a NFSv4-specific f_ops->open routine that just returns -ENOTDIR. This should never be called if things are working properly, but if it ever is, then the dprintk may help in debugging. To facilitate this, a new file_operations field is also added to the nfs_rpc_ops struct. Cc: stable@kernel.org Signed-off-by: Jeff Layton Signed-off-by: Trond Myklebust diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index b238d95..ac28990 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1468,12 +1468,12 @@ static struct dentry *nfs_atomic_lookup(struct inode *dir, struct dentry *dentry res = NULL; goto out; /* This turned out not to be a regular file */ + case -EISDIR: case -ENOTDIR: goto no_open; case -ELOOP: if (!(nd->intent.open.flags & O_NOFOLLOW)) goto no_open; - /* case -EISDIR: */ /* case -EINVAL: */ default: res = ERR_CAST(inode); diff --git a/fs/nfs/file.c b/fs/nfs/file.c index 0a1f831..6d93e07 100644 --- a/fs/nfs/file.c +++ b/fs/nfs/file.c @@ -886,3 +886,35 @@ static int nfs_setlease(struct file *file, long arg, struct file_lock **fl) file->f_path.dentry->d_name.name, arg); return -EINVAL; } + +#ifdef CONFIG_NFS_V4 +static int +nfs4_file_open(struct inode *inode, struct file *filp) +{ + /* + * NFSv4 opens are handled in d_lookup and d_revalidate. If we get to + * this point, then something is very wrong + */ + dprintk("NFS: %s called! inode=%p filp=%p\n", __func__, inode, filp); + return -ENOTDIR; +} + +const struct file_operations nfs4_file_operations = { + .llseek = nfs_file_llseek, + .read = do_sync_read, + .write = do_sync_write, + .aio_read = nfs_file_read, + .aio_write = nfs_file_write, + .mmap = nfs_file_mmap, + .open = nfs4_file_open, + .flush = nfs_file_flush, + .release = nfs_file_release, + .fsync = nfs_file_fsync, + .lock = nfs_lock, + .flock = nfs_flock, + .splice_read = nfs_file_splice_read, + .splice_write = nfs_file_splice_write, + .check_flags = nfs_check_flags, + .setlease = nfs_setlease, +}; +#endif /* CONFIG_NFS_V4 */ diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index c07a55a..50a15fa 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -291,7 +291,7 @@ nfs_fhget(struct super_block *sb, struct nfs_fh *fh, struct nfs_fattr *fattr) */ inode->i_op = NFS_SB(sb)->nfs_client->rpc_ops->file_inode_ops; if (S_ISREG(inode->i_mode)) { - inode->i_fop = &nfs_file_operations; + inode->i_fop = NFS_SB(sb)->nfs_client->rpc_ops->file_ops; inode->i_data.a_ops = &nfs_file_aops; inode->i_data.backing_dev_info = &NFS_SB(sb)->backing_dev_info; } else if (S_ISDIR(inode->i_mode)) { diff --git a/fs/nfs/nfs3proc.c b/fs/nfs/nfs3proc.c index 85f1690..d4bc9ed9 100644 --- a/fs/nfs/nfs3proc.c +++ b/fs/nfs/nfs3proc.c @@ -853,6 +853,7 @@ const struct nfs_rpc_ops nfs_v3_clientops = { .dentry_ops = &nfs_dentry_operations, .dir_inode_ops = &nfs3_dir_inode_operations, .file_inode_ops = &nfs3_file_inode_operations, + .file_ops = &nfs_file_operations, .getroot = nfs3_proc_get_root, .getattr = nfs3_proc_getattr, .setattr = nfs3_proc_setattr, diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index b60fddf..069cb80 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -6253,6 +6253,7 @@ const struct nfs_rpc_ops nfs_v4_clientops = { .dentry_ops = &nfs4_dentry_operations, .dir_inode_ops = &nfs4_dir_inode_operations, .file_inode_ops = &nfs4_file_inode_operations, + .file_ops = &nfs4_file_operations, .getroot = nfs4_proc_get_root, .getattr = nfs4_proc_getattr, .setattr = nfs4_proc_setattr, diff --git a/fs/nfs/proc.c b/fs/nfs/proc.c index ac40b85..f48125d 100644 --- a/fs/nfs/proc.c +++ b/fs/nfs/proc.c @@ -710,6 +710,7 @@ const struct nfs_rpc_ops nfs_v2_clientops = { .dentry_ops = &nfs_dentry_operations, .dir_inode_ops = &nfs_dir_inode_operations, .file_inode_ops = &nfs_file_inode_operations, + .file_ops = &nfs_file_operations, .getroot = nfs_proc_get_root, .getattr = nfs_proc_getattr, .setattr = nfs_proc_setattr, diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index ab2c634..92ecf55 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -410,6 +410,9 @@ extern const struct inode_operations nfs_file_inode_operations; extern const struct inode_operations nfs3_file_inode_operations; #endif /* CONFIG_NFS_V3 */ extern const struct file_operations nfs_file_operations; +#ifdef CONFIG_NFS_V4 +extern const struct file_operations nfs4_file_operations; +#endif /* CONFIG_NFS_V4 */ extern const struct address_space_operations nfs_file_aops; extern const struct address_space_operations nfs_dir_aops; diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index c74595b..2a7c533 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1192,6 +1192,7 @@ struct nfs_rpc_ops { const struct dentry_operations *dentry_ops; const struct inode_operations *dir_inode_ops; const struct inode_operations *file_inode_ops; + const struct file_operations *file_ops; int (*getroot) (struct nfs_server *, struct nfs_fh *, struct nfs_fsinfo *); -- cgit v0.10.2 From 0486958f57a496212e3c1e3d9194deebba3dc3d4 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 4 Nov 2011 13:31:22 -0400 Subject: nfs: move nfs_file_operations declaration to bottom of file.c (try #2) ...a remove a set of forward declarations. Signed-off-by: Jeff Layton Signed-off-by: Trond Myklebust diff --git a/fs/nfs/file.c b/fs/nfs/file.c index 6d93e07..eca56d4 100644 --- a/fs/nfs/file.c +++ b/fs/nfs/file.c @@ -40,48 +40,8 @@ #define NFSDBG_FACILITY NFSDBG_FILE -static int nfs_file_open(struct inode *, struct file *); -static int nfs_file_release(struct inode *, struct file *); -static loff_t nfs_file_llseek(struct file *file, loff_t offset, int origin); -static int nfs_file_mmap(struct file *, struct vm_area_struct *); -static ssize_t nfs_file_splice_read(struct file *filp, loff_t *ppos, - struct pipe_inode_info *pipe, - size_t count, unsigned int flags); -static ssize_t nfs_file_read(struct kiocb *, const struct iovec *iov, - unsigned long nr_segs, loff_t pos); -static ssize_t nfs_file_splice_write(struct pipe_inode_info *pipe, - struct file *filp, loff_t *ppos, - size_t count, unsigned int flags); -static ssize_t nfs_file_write(struct kiocb *, const struct iovec *iov, - unsigned long nr_segs, loff_t pos); -static int nfs_file_flush(struct file *, fl_owner_t id); -static int nfs_file_fsync(struct file *, loff_t, loff_t, int datasync); -static int nfs_check_flags(int flags); -static int nfs_lock(struct file *filp, int cmd, struct file_lock *fl); -static int nfs_flock(struct file *filp, int cmd, struct file_lock *fl); -static int nfs_setlease(struct file *file, long arg, struct file_lock **fl); - static const struct vm_operations_struct nfs_file_vm_ops; -const struct file_operations nfs_file_operations = { - .llseek = nfs_file_llseek, - .read = do_sync_read, - .write = do_sync_write, - .aio_read = nfs_file_read, - .aio_write = nfs_file_write, - .mmap = nfs_file_mmap, - .open = nfs_file_open, - .flush = nfs_file_flush, - .release = nfs_file_release, - .fsync = nfs_file_fsync, - .lock = nfs_lock, - .flock = nfs_flock, - .splice_read = nfs_file_splice_read, - .splice_write = nfs_file_splice_write, - .check_flags = nfs_check_flags, - .setlease = nfs_setlease, -}; - const struct inode_operations nfs_file_inode_operations = { .permission = nfs_permission, .getattr = nfs_getattr, @@ -887,6 +847,25 @@ static int nfs_setlease(struct file *file, long arg, struct file_lock **fl) return -EINVAL; } +const struct file_operations nfs_file_operations = { + .llseek = nfs_file_llseek, + .read = do_sync_read, + .write = do_sync_write, + .aio_read = nfs_file_read, + .aio_write = nfs_file_write, + .mmap = nfs_file_mmap, + .open = nfs_file_open, + .flush = nfs_file_flush, + .release = nfs_file_release, + .fsync = nfs_file_fsync, + .lock = nfs_lock, + .flock = nfs_flock, + .splice_read = nfs_file_splice_read, + .splice_write = nfs_file_splice_write, + .check_flags = nfs_check_flags, + .setlease = nfs_setlease, +}; + #ifdef CONFIG_NFS_V4 static int nfs4_file_open(struct inode *inode, struct file *filp) -- cgit v0.10.2 From b42c909743595208f7987e331f0921b73af2ce25 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Tomas=20Miljenovi=C4=87?= Date: Fri, 4 Nov 2011 23:59:49 -0700 Subject: Input: i8042 - add HP Pavilion dv4s to 'notimeout' and 'nomux' blacklists Touchpad input doesn't work with newer HP Pavilion dv4 laptops due to bad i8042 timeout data. Booting with i8042.notimeout and i8042.nomux successfully works around the problem. This patch adds the devices to the i8042 notimeout and nomux blacklists. Signed-off-by: Tomas Miljenovic Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index bb9f5d3..b4cfc6c 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -431,6 +431,13 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Vostro V13"), }, }, + { + /* Newer HP Pavilion dv4 models */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4 Notebook PC"), + }, + }, { } }; @@ -560,6 +567,13 @@ static const struct dmi_system_id __initconst i8042_dmi_notimeout_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Vostro V13"), }, }, + { + /* Newer HP Pavilion dv4 models */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4 Notebook PC"), + }, + }, { } }; -- cgit v0.10.2 From 15a2015fbc692e1c97d7ce12d96e077f5ae7ea6d Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Sat, 5 Nov 2011 22:06:31 -0700 Subject: ceph: fix iput race when queueing inode work If we queue a work item that calls iput(), make sure we ihold() before attempting to queue work. Otherwise our queued work might miraculously run before we notice the queue_work() succeeded and call ihold(), allowing the inode to be destroyed. That is, instead of if (queue_work(...)) ihold(); we need to do ihold(); if (!queue_work(...)) iput(); Reported-by: Amon Ott Signed-off-by: Sage Weil diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c index e392bfc..116f365 100644 --- a/fs/ceph/inode.c +++ b/fs/ceph/inode.c @@ -1328,12 +1328,13 @@ int ceph_inode_set_size(struct inode *inode, loff_t size) */ void ceph_queue_writeback(struct inode *inode) { + ihold(inode); if (queue_work(ceph_inode_to_client(inode)->wb_wq, &ceph_inode(inode)->i_wb_work)) { dout("ceph_queue_writeback %p\n", inode); - ihold(inode); } else { dout("ceph_queue_writeback %p failed\n", inode); + iput(inode); } } @@ -1353,12 +1354,13 @@ static void ceph_writeback_work(struct work_struct *work) */ void ceph_queue_invalidate(struct inode *inode) { + ihold(inode); if (queue_work(ceph_inode_to_client(inode)->pg_inv_wq, &ceph_inode(inode)->i_pg_inv_work)) { dout("ceph_queue_invalidate %p\n", inode); - ihold(inode); } else { dout("ceph_queue_invalidate %p failed\n", inode); + iput(inode); } } @@ -1434,13 +1436,14 @@ void ceph_queue_vmtruncate(struct inode *inode) { struct ceph_inode_info *ci = ceph_inode(inode); + ihold(inode); if (queue_work(ceph_sb_to_client(inode->i_sb)->trunc_wq, &ci->i_vmtruncate_work)) { dout("ceph_queue_vmtruncate %p\n", inode); - ihold(inode); } else { dout("ceph_queue_vmtruncate %p failed, pending=%d\n", inode, ci->i_truncate_pending); + iput(inode); } } -- cgit v0.10.2 From eb513689c97e3e73bb9b4459d490a8e894b4a546 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Mon, 7 Nov 2011 10:47:42 -0500 Subject: ext4: ignore journalled data options on remount if fs has no journal This avoids a confusing failure in the init scripts when the /etc/fstab has data=writeback or data=journal but the file system does not have a journal. So check for this case explicitly, and warn the user that we are ignoring the (pointless, since they have no journal) data=* mount option. Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 9953d80..0435013 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1683,7 +1683,9 @@ static int parse_options(char *options, struct super_block *sb, data_opt = EXT4_MOUNT_WRITEBACK_DATA; datacheck: if (is_remount) { - if (test_opt(sb, DATA_FLAGS) != data_opt) { + if (!sbi->s_journal) + ext4_msg(sb, KERN_WARNING, "Remounting file system with no journal so ignoring journalled data option"); + else if (test_opt(sb, DATA_FLAGS) != data_opt) { ext4_msg(sb, KERN_ERR, "Cannot change data mode on remount"); return 0; -- cgit v0.10.2 From 2397256d6218e7bf5147a3b01dcc6aec20fd3916 Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Mon, 7 Nov 2011 10:50:09 -0500 Subject: ext4: Remove kernel_lock annotations The BKL is gone, these annotations are useless. Signed-off-by: Richard Weinberger Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 0435013..3858767 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -3101,8 +3101,6 @@ static void ext4_destroy_lazyinit_thread(void) } static int ext4_fill_super(struct super_block *sb, void *data, int silent) - __releases(kernel_lock) - __acquires(kernel_lock) { char *orig_data = kstrdup(data, GFP_KERNEL); struct buffer_head *bh; -- cgit v0.10.2 From 3c1fcb2c24519febd7ca9cf292fa5bdf513b601f Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Mon, 7 Nov 2011 11:01:13 -0500 Subject: ext4: add blk_finish_plug in error case of writepages. blk_finish_plug is needed in error case of writepages. Signed-off-by: Namjae Jeon Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index cc5a6da..18b262b 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2270,6 +2270,7 @@ retry: ext4_msg(inode->i_sb, KERN_CRIT, "%s: jbd2_start: " "%ld pages, ino %lu; err %d", __func__, wbc->nr_to_write, inode->i_ino, ret); + blk_finish_plug(&plug); goto out_writepages; } -- cgit v0.10.2 From fdbd3ce9efb3a045266f2f6b2f1b6047882ff092 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 7 Nov 2011 07:53:23 -0800 Subject: PCI: pciehp: Retrieve link speed after link is trained During hot plug, board_added will call pciehp_power_on_slot(). But link speed is updated in pciehp_power_on_slot(). We should not update link speed there, because that is too early. So move the link speed update to pciehp_check_link_status() after making sure the link has been trained. -v2: fix compile warning that Kenji found. Signed-off-by: Yinghai Lu Reviewed-by: Kenji Kaneshige Tested-by: Kenji Kaneshige Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 96dc473..6692832 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -294,6 +294,8 @@ int pciehp_check_link_status(struct controller *ctrl) return retval; } + pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status); + return retval; } @@ -484,7 +486,6 @@ int pciehp_power_on_slot(struct slot * slot) u16 slot_cmd; u16 cmd_mask; u16 slot_status; - u16 lnk_status; int retval = 0; /* Clear sticky power-fault bit from previous power failures */ @@ -516,14 +517,6 @@ int pciehp_power_on_slot(struct slot * slot) ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__, pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_cmd); - retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status); - if (retval) { - ctrl_err(ctrl, "%s: Cannot read LNKSTA register\n", - __func__); - return retval; - } - pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status); - return retval; } -- cgit v0.10.2 From a6f498a891c730327645a7afa10c5ae977de6fd8 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 7 Nov 2011 15:50:32 -0500 Subject: NFS: Fix a regression in the referral code Fix a regression that was introduced by commit 0c2e53f11a6dae9e3af5f50f5ad0382e7c3e0cfa (NFS: Remove the unused "lookupfh()" version of nfs4_proc_lookup()). In the case where the lookup gets an NFS4ERR_MOVED, we want to return the result of nfs4_get_referral(). Instead, that value is getting clobbered by the call to nfs4_handle_exception()... Reported-by: Tigran Mkrtchyan Tested-by: Tigran Mkrtchyan Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 069cb80..be2bbac 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2464,8 +2464,7 @@ static int nfs4_proc_lookup(struct rpc_clnt *clnt, struct inode *dir, struct qst case -NFS4ERR_BADNAME: return -ENOENT; case -NFS4ERR_MOVED: - err = nfs4_get_referral(dir, name, fattr, fhandle); - break; + return nfs4_get_referral(dir, name, fattr, fhandle); case -NFS4ERR_WRONGSEC: nfs_fixup_secinfo_attributes(fattr, fhandle); } -- cgit v0.10.2 From 5698eb4eda657fd4a74612a65cd5d583f35a5bdb Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 7 Nov 2011 15:58:40 -0800 Subject: ARM: OMAP3: CPUidle: include The CPUidle use THIS_MODULE, so needs Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 4bf6e6e..2e0fa5a 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -24,6 +24,7 @@ #include #include +#include #include #include -- cgit v0.10.2 From 406478dc911e16677fbd9c84d1d50cdffbc031ab Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Mon, 7 Nov 2011 16:07:04 -0800 Subject: drm/i915: Turn on a required 3D clock gating bit on Sandybridge. Fixes rendering failures in Unigine Tropics and Sanctuary and the mesa "fire" demo. Signed-off-by: Eric Anholt Cc: stable@kernel.org Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 5a09416..b807275 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3444,6 +3444,9 @@ #define GT_FIFO_FREE_ENTRIES 0x120008 #define GT_FIFO_NUM_RESERVED_ENTRIES 20 +#define GEN6_UCGCTL2 0x9404 +# define GEN6_RCPBUNIT_CLOCK_GATE_DISABLE (1 << 12) + #define GEN6_RPNSWREQ 0xA008 #define GEN6_TURBO_DISABLE (1<<31) #define GEN6_FREQUENCY(x) ((x)<<25) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 9fa342e..2b2a764 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8148,6 +8148,15 @@ static void gen6_init_clock_gating(struct drm_device *dev) I915_WRITE(WM2_LP_ILK, 0); I915_WRITE(WM1_LP_ILK, 0); + /* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock + * gating disable must be set. Failure to set it results in + * flickering pixels due to Z write ordering failures after + * some amount of runtime in the Mesa "fire" demo, and Unigine + * Sanctuary and Tropics, and apparently anything else with + * alpha test or pixel discard. + */ + I915_WRITE(GEN6_UCGCTL2, GEN6_RCPBUNIT_CLOCK_GATE_DISABLE); + /* * According to the spec the following bits should be * set in order to enable memory self-refresh and fbc: -- cgit v0.10.2 From 9ca1d10d748e56964de95e3ed80211b192f56cf4 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Mon, 7 Nov 2011 16:07:05 -0800 Subject: drm/i915: Turn on another required clock gating bit on gen6. Unlike the previous one, I don't have known testcases it fixes. I'd rather not go through the same debug cycle on whatever testcases those might be. Signed-off-by: Eric Anholt Cc: stable@kernel.org Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index b807275..a34e866 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3446,6 +3446,7 @@ #define GEN6_UCGCTL2 0x9404 # define GEN6_RCPBUNIT_CLOCK_GATE_DISABLE (1 << 12) +# define GEN6_RCCUNIT_CLOCK_GATE_DISABLE (1 << 11) #define GEN6_RPNSWREQ 0xA008 #define GEN6_TURBO_DISABLE (1<<31) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 2b2a764..591eb0ed 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8154,8 +8154,13 @@ static void gen6_init_clock_gating(struct drm_device *dev) * some amount of runtime in the Mesa "fire" demo, and Unigine * Sanctuary and Tropics, and apparently anything else with * alpha test or pixel discard. + * + * According to the spec, bit 11 (RCCUNIT) must also be set, + * but we didn't debug actual testcases to find it out. */ - I915_WRITE(GEN6_UCGCTL2, GEN6_RCPBUNIT_CLOCK_GATE_DISABLE); + I915_WRITE(GEN6_UCGCTL2, + GEN6_RCPBUNIT_CLOCK_GATE_DISABLE | + GEN6_RCCUNIT_CLOCK_GATE_DISABLE); /* * According to the spec the following bits should be -- cgit v0.10.2 From 1258ea596fe0422272525d9ec8a25b703de4623f Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 8 Nov 2011 03:16:09 -0700 Subject: ARM: OMAP2xxx: HWMOD: Fix DSS reset DSS needs all DSS clocks to be enabled to be able to finish reset properly. Before v3.1-rc1 the omapdss driver was managing clocks and resets correctly. However, when omapdss started using runtime PM at v3.1-rc1, the responsibility for the reset moved to HWMOD framework. HWMOD framework does not currently enable all the DSS clocks when resetting the DSS hardware. This hasn't caused any problems so far, but we may just have been lucky. This patch sets HWMOD_CONTROL_OPT_CLKS_IN_RESET for dss_core in OMAP2xxx HWMOD data, fixing the issue. Signed-off-by: Tomi Valkeinen [paul@pwsan.com: merged duplicate .flags fields] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 6d72062..5160e35 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -875,6 +875,10 @@ static struct omap_hwmod_ocp_if *omap2420_dss_slaves[] = { }; static struct omap_hwmod_opt_clk dss_opt_clks[] = { + /* + * The DSS HW needs all DSS clocks enabled during reset. The dss_core + * driver does not use these clocks. + */ { .role = "tv_clk", .clk = "dss_54m_fck" }, { .role = "sys_clk", .clk = "dss2_fck" }, }; @@ -899,7 +903,7 @@ static struct omap_hwmod omap2420_dss_core_hwmod = { .slaves_cnt = ARRAY_SIZE(omap2420_dss_slaves), .masters = omap2420_dss_masters, .masters_cnt = ARRAY_SIZE(omap2420_dss_masters), - .flags = HWMOD_NO_IDLEST, + .flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET, }; /* l4_core -> dss_dispc */ diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index a2580d0..d02a44e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -942,6 +942,10 @@ static struct omap_hwmod_ocp_if *omap2430_dss_slaves[] = { }; static struct omap_hwmod_opt_clk dss_opt_clks[] = { + /* + * The DSS HW needs all DSS clocks enabled during reset. The dss_core + * driver does not use these clocks. + */ { .role = "tv_clk", .clk = "dss_54m_fck" }, { .role = "sys_clk", .clk = "dss2_fck" }, }; @@ -966,7 +970,7 @@ static struct omap_hwmod omap2430_dss_core_hwmod = { .slaves_cnt = ARRAY_SIZE(omap2430_dss_slaves), .masters = omap2430_dss_masters, .masters_cnt = ARRAY_SIZE(omap2430_dss_masters), - .flags = HWMOD_NO_IDLEST, + .flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET, }; /* l4_core -> dss_dispc */ -- cgit v0.10.2 From b8ac10d8b75843c9ddd6aadf70a0cdf8aa783659 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 8 Nov 2011 03:16:09 -0700 Subject: ARM: OMAP2xxx: HWMOD: fix DSS clock data The OMAP2xxx HWMOD data currently contains two errors with DSS clocks: - dss_rfbi is missing ick opt-clock, which is needed for RFBI to calculate timings - dss_venc's interface and main clocks are wrong, causing VENC to fail to start These problems were temporarily fixed with a DSS patch 9ede365aa6f74428a1f69c21ca1cf21213167576 ("HACK: OMAP: DSS2: clk hack for OMAP2/3"), which can be reverted after this patch (and the similar patches for other OMAPs). Signed-off-by: Tomi Valkeinen Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 5160e35..74037a5 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -965,6 +965,10 @@ static struct omap_hwmod_ocp_if *omap2420_dss_rfbi_slaves[] = { &omap2420_l4_core__dss_rfbi, }; +static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = { + { .role = "ick", .clk = "dss_ick" }, +}; + static struct omap_hwmod omap2420_dss_rfbi_hwmod = { .name = "dss_rfbi", .class = &omap2_rfbi_hwmod_class, @@ -976,6 +980,8 @@ static struct omap_hwmod omap2420_dss_rfbi_hwmod = { .module_offs = CORE_MOD, }, }, + .opt_clks = dss_rfbi_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), .slaves = omap2420_dss_rfbi_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_dss_rfbi_slaves), .flags = HWMOD_NO_IDLEST, @@ -985,7 +991,7 @@ static struct omap_hwmod omap2420_dss_rfbi_hwmod = { static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = { .master = &omap2420_l4_core_hwmod, .slave = &omap2420_dss_venc_hwmod, - .clk = "dss_54m_fck", + .clk = "dss_ick", .addr = omap2_dss_venc_addrs, .fw = { .omap2 = { @@ -1005,7 +1011,7 @@ static struct omap_hwmod_ocp_if *omap2420_dss_venc_slaves[] = { static struct omap_hwmod omap2420_dss_venc_hwmod = { .name = "dss_venc", .class = &omap2_venc_hwmod_class, - .main_clk = "dss1_fck", + .main_clk = "dss_54m_fck", .prcm = { .omap2 = { .prcm_reg_id = 1, diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index d02a44e..6f03653 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -1020,6 +1020,10 @@ static struct omap_hwmod_ocp_if *omap2430_dss_rfbi_slaves[] = { &omap2430_l4_core__dss_rfbi, }; +static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = { + { .role = "ick", .clk = "dss_ick" }, +}; + static struct omap_hwmod omap2430_dss_rfbi_hwmod = { .name = "dss_rfbi", .class = &omap2_rfbi_hwmod_class, @@ -1031,6 +1035,8 @@ static struct omap_hwmod omap2430_dss_rfbi_hwmod = { .module_offs = CORE_MOD, }, }, + .opt_clks = dss_rfbi_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), .slaves = omap2430_dss_rfbi_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_dss_rfbi_slaves), .flags = HWMOD_NO_IDLEST, @@ -1040,7 +1046,7 @@ static struct omap_hwmod omap2430_dss_rfbi_hwmod = { static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_dss_venc_hwmod, - .clk = "dss_54m_fck", + .clk = "dss_ick", .addr = omap2_dss_venc_addrs, .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, @@ -1054,7 +1060,7 @@ static struct omap_hwmod_ocp_if *omap2430_dss_venc_slaves[] = { static struct omap_hwmod omap2430_dss_venc_hwmod = { .name = "dss_venc", .class = &omap2_venc_hwmod_class, - .main_clk = "dss1_fck", + .main_clk = "dss_54m_fck", .prcm = { .omap2 = { .prcm_reg_id = 1, -- cgit v0.10.2 From 8c3105ca1a42783b13930fbd375484ec8c72e608 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 8 Nov 2011 03:16:10 -0700 Subject: ARM: OMAP3: HWMOD: Fix DSS reset DSS needs all DSS clocks to be enabled to be able to finish reset properly. Before v3.1-rc1 the omapdss driver was managing clocks and resets correctly. However, when omapdss started using runtime PM at v3.1-rc1, the responsibility for the reset moved to HWMOD framework. HWMOD framework does not currently enable all the DSS clocks when resetting the DSS hardware. This hasn't caused any problems so far, but we may just have been lucky. dss_core's opt-clocks is also missing dss_96m_fck, which is a DSS clock present only on OMAP3430, and thus required on OMAP3430 to finish the reset. This patch sets HWMOD_CONTROL_OPT_CLKS_IN_RESET and adds the dss_96m_fck opt-clock for dss_core in OMAP3 HWMOD data, fixing the issue. Signed-off-by: Tomi Valkeinen [paul@pwsan.com: merged duplicate .flags fields] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index bc9035e..45ccd4f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1369,9 +1369,14 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_slaves[] = { }; static struct omap_hwmod_opt_clk dss_opt_clks[] = { - { .role = "tv_clk", .clk = "dss_tv_fck" }, - { .role = "video_clk", .clk = "dss_96m_fck" }, + /* + * The DSS HW needs all DSS clocks enabled during reset. The dss_core + * driver does not use these clocks. + */ { .role = "sys_clk", .clk = "dss2_alwon_fck" }, + { .role = "tv_clk", .clk = "dss_tv_fck" }, + /* required only on OMAP3430 */ + { .role = "tv_dac_clk", .clk = "dss_96m_fck" }, }; static struct omap_hwmod omap3430es1_dss_core_hwmod = { @@ -1394,11 +1399,12 @@ static struct omap_hwmod omap3430es1_dss_core_hwmod = { .slaves_cnt = ARRAY_SIZE(omap3430es1_dss_slaves), .masters = omap3xxx_dss_masters, .masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters), - .flags = HWMOD_NO_IDLEST, + .flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET, }; static struct omap_hwmod omap3xxx_dss_core_hwmod = { .name = "dss_core", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .class = &omap2_dss_hwmod_class, .main_clk = "dss1_alwon_fck", /* instead of dss_fck */ .sdma_reqs = omap3xxx_dss_sdma_chs, -- cgit v0.10.2 From 6c3d7e34d68ffae888d33bf364f447e0b415591f Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 8 Nov 2011 03:16:10 -0700 Subject: ARM: OMAP3: HWMOD: fix DSS clock data The OMAP3 HWMOD data currently contains these errors with DSS clocks: - dss_rfbi is missing ick opt-clock, which is needed for RFBI to calculate timings - dss_dsi is missing ick and sys_clk - dss_venc is missing dss_96m_fck opt-clock, which is required on OMAP3430 - dss_venc's interface and main clocks are wrong, causing VENC to fail to start These problems were temporarily fixed with a DSS patch 9ede365aa6f74428a1f69c21ca1cf21213167576 ("HACK: OMAP: DSS2: clk hack for OMAP2/3"), which can be reverted after this patch (and the similar patches for other OMAPs). Signed-off-by: Tomi Valkeinen Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 45ccd4f..4aaf0ca 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1492,6 +1492,7 @@ static struct omap_hwmod_addr_space omap3xxx_dss_dsi1_addrs[] = { static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dsi1 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_dss_dsi1_hwmod, + .clk = "dss_ick", .addr = omap3xxx_dss_dsi1_addrs, .fw = { .omap2 = { @@ -1508,6 +1509,10 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dsi1_slaves[] = { &omap3xxx_l4_core__dss_dsi1, }; +static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = { + { .role = "sys_clk", .clk = "dss2_alwon_fck" }, +}; + static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = { .name = "dss_dsi1", .class = &omap3xxx_dsi_hwmod_class, @@ -1520,6 +1525,8 @@ static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = { .module_offs = OMAP3430_DSS_MOD, }, }, + .opt_clks = dss_dsi1_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_opt_clks), .slaves = omap3xxx_dss_dsi1_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dsi1_slaves), .flags = HWMOD_NO_IDLEST, @@ -1546,6 +1553,10 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_rfbi_slaves[] = { &omap3xxx_l4_core__dss_rfbi, }; +static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = { + { .role = "ick", .clk = "dss_ick" }, +}; + static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = { .name = "dss_rfbi", .class = &omap2_rfbi_hwmod_class, @@ -1557,6 +1568,8 @@ static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = { .module_offs = OMAP3430_DSS_MOD, }, }, + .opt_clks = dss_rfbi_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), .slaves = omap3xxx_dss_rfbi_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_rfbi_slaves), .flags = HWMOD_NO_IDLEST, @@ -1566,7 +1579,7 @@ static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = { static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_dss_venc_hwmod, - .clk = "dss_tv_fck", + .clk = "dss_ick", .addr = omap2_dss_venc_addrs, .fw = { .omap2 = { @@ -1584,10 +1597,15 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_venc_slaves[] = { &omap3xxx_l4_core__dss_venc, }; +static struct omap_hwmod_opt_clk dss_venc_opt_clks[] = { + /* required only on OMAP3430 */ + { .role = "tv_dac_clk", .clk = "dss_96m_fck" }, +}; + static struct omap_hwmod omap3xxx_dss_venc_hwmod = { .name = "dss_venc", .class = &omap2_venc_hwmod_class, - .main_clk = "dss1_alwon_fck", + .main_clk = "dss_tv_fck", .prcm = { .omap2 = { .prcm_reg_id = 1, @@ -1595,6 +1613,8 @@ static struct omap_hwmod omap3xxx_dss_venc_hwmod = { .module_offs = OMAP3430_DSS_MOD, }, }, + .opt_clks = dss_venc_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_venc_opt_clks), .slaves = omap3xxx_dss_venc_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_venc_slaves), .flags = HWMOD_NO_IDLEST, -- cgit v0.10.2 From 4247878efca76143aa015ed1142652056052abb8 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 8 Nov 2011 03:16:11 -0700 Subject: ARM: OMAP4: HWMOD: remove extra clocks Remove the dss_dss_clk from dss_core's opt-clocks. dss_dss_clk already defined as the dss main_clk, and thus is not needed as an opt-clock. Remove opt-clocks for dss_dispc, as dispc only uses the main_clk. Signed-off-by: Tomi Valkeinen Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 7695e5d..3b9f2d9 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1240,7 +1240,6 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_slaves[] = { static struct omap_hwmod_opt_clk dss_opt_clks[] = { { .role = "sys_clk", .clk = "dss_sys_clk" }, { .role = "tv_clk", .clk = "dss_tv_clk" }, - { .role = "dss_clk", .clk = "dss_dss_clk" }, { .role = "video_clk", .clk = "dss_48mhz_clk" }, }; @@ -1340,12 +1339,6 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_dispc_slaves[] = { &omap44xx_l4_per__dss_dispc, }; -static struct omap_hwmod_opt_clk dss_dispc_opt_clks[] = { - { .role = "sys_clk", .clk = "dss_sys_clk" }, - { .role = "tv_clk", .clk = "dss_tv_clk" }, - { .role = "hdmi_clk", .clk = "dss_48mhz_clk" }, -}; - static struct omap_hwmod omap44xx_dss_dispc_hwmod = { .name = "dss_dispc", .class = &omap44xx_dispc_hwmod_class, @@ -1359,8 +1352,6 @@ static struct omap_hwmod omap44xx_dss_dispc_hwmod = { .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, }, }, - .opt_clks = dss_dispc_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_dispc_opt_clks), .slaves = omap44xx_dss_dispc_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_dss_dispc_slaves), }; -- cgit v0.10.2 From 37ad085527860397438f27c81a2cb13272378458 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 8 Nov 2011 03:16:11 -0700 Subject: ARM: OMAP4: HWMOD: Add HWMOD_CONTROL_OPT_CLKS_IN_RESET for dss_core DSS needs all DSS clocks to be enabled to be able to finish reset properly. Before v3.1-rc1 the omapdss driver was managing clocks and resets correctly. However, when omapdss started using runtime PM at v3.1-rc1, the responsibility for the reset moved to HWMOD framework. HWMOD framework does not currently enable all the DSS clocks when resetting the DSS hardware. This causes the HWMOD frameworks boot-time reset to fail, possibly leaving the DSS hardware in undefined state. This patch sets HWMOD_CONTROL_OPT_CLKS_IN_RESET for dss_core. The flag is actually not used on OMAP4, because dss_core hardware does not have soft-reset functionality and thus the HWMOD framework never resets nor waits for the reset to finish. However, while the flag is not strictly needed currently, I think it represents the HW correctly: all the DSS clocks should be enabled after power-on to allow DSS hardware to finish its reset. A custom reset function will be added in the following patches which manages this correctly for OMAP4. Signed-off-by: Tomi Valkeinen Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 3b9f2d9..b82720a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1245,6 +1245,7 @@ static struct omap_hwmod_opt_clk dss_opt_clks[] = { static struct omap_hwmod omap44xx_dss_hwmod = { .name = "dss_core", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .class = &omap44xx_dss_hwmod_class, .clkdm_name = "l3_dss_clkdm", .main_clk = "dss_dss_clk", -- cgit v0.10.2 From 4d0698d98f501b86d3bef38c46a54a702e0469a0 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 8 Nov 2011 03:16:12 -0700 Subject: ARM: OMAP4: HWMOD: fix DSS clock data The OMAP4 HWMOD data currently contains errors with DSS clocks: dss_hdmi and dss_venc have their main_clks wrong. The clocks should be dss_48mhz_clk and dss_tv_clk, respectively. These problems were temporarily fixed with the DSS patches 9ede365aa6f74428a1f69c21ca1cf21213167576 ("HACK: OMAP: DSS2: clk hack for OMAP2/3"), and df5d3ed23cf73ee0763a8963003bda9b69d9620f ("OMAP: DSS2: HDMI: fix hdmi clock name"), which can be reverted after this patch. Signed-off-by: Tomi Valkeinen Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index b82720a..cadf0bb 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1240,7 +1240,7 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_slaves[] = { static struct omap_hwmod_opt_clk dss_opt_clks[] = { { .role = "sys_clk", .clk = "dss_sys_clk" }, { .role = "tv_clk", .clk = "dss_tv_clk" }, - { .role = "video_clk", .clk = "dss_48mhz_clk" }, + { .role = "hdmi_clk", .clk = "dss_48mhz_clk" }, }; static struct omap_hwmod omap44xx_dss_hwmod = { @@ -1616,7 +1616,7 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = { .clkdm_name = "l3_dss_clkdm", .mpu_irqs = omap44xx_dss_hdmi_irqs, .sdma_reqs = omap44xx_dss_hdmi_sdma_reqs, - .main_clk = "dss_dss_clk", + .main_clk = "dss_48mhz_clk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, @@ -1777,7 +1777,7 @@ static struct omap_hwmod omap44xx_dss_venc_hwmod = { .name = "dss_venc", .class = &omap44xx_venc_hwmod_class, .clkdm_name = "l3_dss_clkdm", - .main_clk = "dss_dss_clk", + .main_clk = "dss_tv_clk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, -- cgit v0.10.2 From 3ce32676bb355420ceeda57b73dd84df0ff5ad6f Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 8 Nov 2011 03:16:12 -0700 Subject: ARM: OMAP2/3: HWMOD: Add SYSS_HAS_RESET_STATUS for dss OMAP2/3 dss_core has a reset status flag in sysstatus register. Add SYSS_HAS_RESET_STATUS flag to HWMOD data so it can be used. Signed-off-by: Tomi Valkeinen Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c index c451729..d78c132 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c @@ -43,7 +43,8 @@ static struct omap_hwmod_class_sysconfig omap2_dss_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | + SYSS_HAS_RESET_STATUS), .sysc_fields = &omap_hwmod_sysc_type1, }; -- cgit v0.10.2 From 13662dc5b177d68885695ef513dd4ae0e4d2a099 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 8 Nov 2011 03:16:13 -0700 Subject: ARM: OMAP: HWMOD: Unify DSS resets for OMAPs This patch adds a custom DSS reset function used on OMAPs from OMAP2 forward. The function doesn't actually do a reset, it only waits for the reset to complete. The reason for this is that on OMAP4 there is no possibility to do a SW reset, and on OMAP2/3 doing a SW reset for dss_core resets all the other DSS modules also, thus breaking the HWMOD model where every DSS module is handled independently. This fixes the problem with DSS reset on OMAP4, caused by the fact that because there's no SW reset for dss_core on OMAP4, the HWMOD framework doesn't try to reset dss_core and thus the DSS clocks were never enabled at the same time. This causes causes the HWMOD reset to fail for dss_dispc and dss_rfbi. The common reset function will also allow us to fix another problem in the future: before doing a reset we need to disable DSS outputs, which are in some cases enabled by the bootloader, as otherwise DSS HW seems to get more or less stuck, requiring a power reset to recover. Signed-off-by: Tomi Valkeinen [paul@pwsan.com: modified to build arch/arm/mach-omap2/display.o unconditionally to avoid an error when !CONFIG_OMAP2_DSS] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 69ab1c0..b009f17 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -4,7 +4,7 @@ # Common support obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \ - common.o gpio.o dma.o wd_timer.o + common.o gpio.o dma.o wd_timer.o display.o omap-2-3-common = irq.o sdrc.o hwmod-common = omap_hwmod.o \ @@ -264,7 +264,4 @@ smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o obj-y += $(smsc911x-m) $(smsc911x-y) obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o -disp-$(CONFIG_OMAP2_DSS) := display.o -obj-y += $(disp-m) $(disp-y) - obj-y += common-board-devices.o twl-common.o diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index adb2756..941b545 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -27,6 +27,7 @@ #include #include #include +#include #include "control.h" @@ -172,3 +173,37 @@ int __init omap_display_init(struct omap_dss_board_info *board_data) return r; } + +#define MAX_MODULE_SOFTRESET_WAIT 10000 +int omap_dss_reset(struct omap_hwmod *oh) +{ + struct omap_hwmod_opt_clk *oc; + int c = 0; + int i, r; + + if (!(oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)) { + pr_err("dss_core: hwmod data doesn't contain reset data\n"); + return -EINVAL; + } + + for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) + if (oc->_clk) + clk_enable(oc->_clk); + + omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs) + & SYSS_RESETDONE_MASK), + MAX_MODULE_SOFTRESET_WAIT, c); + + if (c == MAX_MODULE_SOFTRESET_WAIT) + pr_warning("dss_core: waiting for reset to finish failed\n"); + else + pr_debug("dss_core: softreset done\n"); + + for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) + if (oc->_clk) + clk_disable(oc->_clk); + + r = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0; + + return r; +} diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c index d78c132..c11273d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c @@ -11,6 +11,7 @@ #include #include #include +#include #include @@ -51,6 +52,7 @@ static struct omap_hwmod_class_sysconfig omap2_dss_sysc = { struct omap_hwmod_class omap2_dss_hwmod_class = { .name = "dss", .sysc = &omap2_dss_sysc, + .reset = omap_dss_reset, }; /* diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index cadf0bb..3b04d63 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -30,6 +30,7 @@ #include #include #include +#include #include "omap_hwmod_common_data.h" @@ -1187,6 +1188,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_dss_sysc = { static struct omap_hwmod_class omap44xx_dss_hwmod_class = { .name = "dss", .sysc = &omap44xx_dss_sysc, + .reset = omap_dss_reset, }; /* dss */ diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index c50df48..3ff3e36 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -30,6 +30,7 @@ #include #include +#include struct sys_timer; @@ -55,6 +56,8 @@ void am35xx_init_early(void); void ti816x_init_early(void); void omap4430_init_early(void); +extern int omap_dss_reset(struct omap_hwmod *); + void omap_sram_init(void); /* diff --git a/include/video/omapdss.h b/include/video/omapdss.h index b66ebb2..378c7ed 100644 --- a/include/video/omapdss.h +++ b/include/video/omapdss.h @@ -307,15 +307,8 @@ struct omap_dss_board_info { void (*dsi_disable_pads)(int dsi_id, unsigned lane_mask); }; -#if defined(CONFIG_OMAP2_DSS_MODULE) || defined(CONFIG_OMAP2_DSS) /* Init with the board info */ extern int omap_display_init(struct omap_dss_board_info *board_data); -#else -static inline int omap_display_init(struct omap_dss_board_info *board_data) -{ - return 0; -} -#endif struct omap_display_platform_data { struct omap_dss_board_info *board_data; -- cgit v0.10.2 From b923d40dd4211c4ef7d4efa2bd81b7ca1d8744c1 Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Thu, 6 Oct 2011 18:04:08 -0600 Subject: ARM: OMAP2PLUS: DSS: Ensure DSS works correctly if display is enabled in bootloader Resetting DISPC when a DISPC output is enabled causes the DSS to go into an inconsistent state. Thus if the bootloader has enabled a display, the hwmod code cannot reset the DISPC module just like that, but the outputs need to be disabled first. Add function dispc_disable_outputs() which disables all active overlay manager and ensure all frame transfers are completed. Modify omap_dss_reset() to call this function and clear DSS_CONTROL, DSS_SDI_CONTROL and DSS_PLL_CONTROL so that DSS is in a clean state when the DSS2 driver starts. This resolves the hang issue(caused by a L3 error during boot) seen on the beagle board C3, which has a factory bootloader that enables display. The issue is resolved with this patch. Thanks to Tomi and Sricharan for some additional testing. Acked-by: Tomi Valkeinen Tested-by: R, Sricharan Signed-off-by: Archit Taneja [paul@pwsan.com: restructured code, removed omap_{read,write}l(), removed cpu_is_omap*() calls and converted to dev_attr] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 941b545..dce9905 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -30,6 +30,32 @@ #include #include "control.h" +#include "display.h" + +#define DISPC_CONTROL 0x0040 +#define DISPC_CONTROL2 0x0238 +#define DISPC_IRQSTATUS 0x0018 + +#define DSS_SYSCONFIG 0x10 +#define DSS_SYSSTATUS 0x14 +#define DSS_CONTROL 0x40 +#define DSS_SDI_CONTROL 0x44 +#define DSS_PLL_CONTROL 0x48 + +#define LCD_EN_MASK (0x1 << 0) +#define DIGIT_EN_MASK (0x1 << 1) + +#define FRAMEDONE_IRQ_SHIFT 0 +#define EVSYNC_EVEN_IRQ_SHIFT 2 +#define EVSYNC_ODD_IRQ_SHIFT 3 +#define FRAMEDONE2_IRQ_SHIFT 22 +#define FRAMEDONETV_IRQ_SHIFT 24 + +/* + * FRAMEDONE_IRQ_TIMEOUT: how long (in milliseconds) to wait during DISPC + * reset before deciding that something has gone wrong + */ +#define FRAMEDONE_IRQ_TIMEOUT 100 static struct platform_device omap_display_device = { .name = "omapdss", @@ -174,6 +200,90 @@ int __init omap_display_init(struct omap_dss_board_info *board_data) return r; } +static void dispc_disable_outputs(void) +{ + u32 v, irq_mask = 0; + bool lcd_en, digit_en, lcd2_en = false; + int i; + struct omap_dss_dispc_dev_attr *da; + struct omap_hwmod *oh; + + oh = omap_hwmod_lookup("dss_dispc"); + if (!oh) { + WARN(1, "display: could not disable outputs during reset - could not find dss_dispc hwmod\n"); + return; + } + + if (!oh->dev_attr) { + pr_err("display: could not disable outputs during reset due to missing dev_attr\n"); + return; + } + + da = (struct omap_dss_dispc_dev_attr *)oh->dev_attr; + + /* store value of LCDENABLE and DIGITENABLE bits */ + v = omap_hwmod_read(oh, DISPC_CONTROL); + lcd_en = v & LCD_EN_MASK; + digit_en = v & DIGIT_EN_MASK; + + /* store value of LCDENABLE for LCD2 */ + if (da->manager_count > 2) { + v = omap_hwmod_read(oh, DISPC_CONTROL2); + lcd2_en = v & LCD_EN_MASK; + } + + if (!(lcd_en | digit_en | lcd2_en)) + return; /* no managers currently enabled */ + + /* + * If any manager was enabled, we need to disable it before + * DSS clocks are disabled or DISPC module is reset + */ + if (lcd_en) + irq_mask |= 1 << FRAMEDONE_IRQ_SHIFT; + + if (digit_en) { + if (da->has_framedonetv_irq) { + irq_mask |= 1 << FRAMEDONETV_IRQ_SHIFT; + } else { + irq_mask |= 1 << EVSYNC_EVEN_IRQ_SHIFT | + 1 << EVSYNC_ODD_IRQ_SHIFT; + } + } + + if (lcd2_en) + irq_mask |= 1 << FRAMEDONE2_IRQ_SHIFT; + + /* + * clear any previous FRAMEDONE, FRAMEDONETV, + * EVSYNC_EVEN/ODD or FRAMEDONE2 interrupts + */ + omap_hwmod_write(irq_mask, oh, DISPC_IRQSTATUS); + + /* disable LCD and TV managers */ + v = omap_hwmod_read(oh, DISPC_CONTROL); + v &= ~(LCD_EN_MASK | DIGIT_EN_MASK); + omap_hwmod_write(v, oh, DISPC_CONTROL); + + /* disable LCD2 manager */ + if (da->manager_count > 2) { + v = omap_hwmod_read(oh, DISPC_CONTROL2); + v &= ~LCD_EN_MASK; + omap_hwmod_write(v, oh, DISPC_CONTROL2); + } + + i = 0; + while ((omap_hwmod_read(oh, DISPC_IRQSTATUS) & irq_mask) != + irq_mask) { + i++; + if (i > FRAMEDONE_IRQ_TIMEOUT) { + pr_err("didn't get FRAMEDONE1/2 or TV interrupt\n"); + break; + } + mdelay(1); + } +} + #define MAX_MODULE_SOFTRESET_WAIT 10000 int omap_dss_reset(struct omap_hwmod *oh) { @@ -190,6 +300,20 @@ int omap_dss_reset(struct omap_hwmod *oh) if (oc->_clk) clk_enable(oc->_clk); + dispc_disable_outputs(); + + /* clear SDI registers */ + if (cpu_is_omap3430()) { + omap_hwmod_write(0x0, oh, DSS_SDI_CONTROL); + omap_hwmod_write(0x0, oh, DSS_PLL_CONTROL); + } + + /* + * clear DSS_CONTROL register to switch DSS clock sources to + * PRCM clock, if any + */ + omap_hwmod_write(0x0, oh, DSS_CONTROL); + omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs) & SYSS_RESETDONE_MASK), MAX_MODULE_SOFTRESET_WAIT, c); diff --git a/arch/arm/mach-omap2/display.h b/arch/arm/mach-omap2/display.h new file mode 100644 index 0000000..b871b017 --- /dev/null +++ b/arch/arm/mach-omap2/display.h @@ -0,0 +1,29 @@ +/* + * display.h - OMAP2+ integration-specific DSS header + * + * Copyright (C) 2011 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_DISPLAY_H +#define __ARCH_ARM_MACH_OMAP2_DISPLAY_H + +#include + +struct omap_dss_dispc_dev_attr { + u8 manager_count; + bool has_framedonetv_irq; +}; + +#endif diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 74037a5..a5409ce 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -943,6 +943,7 @@ static struct omap_hwmod omap2420_dss_dispc_hwmod = { .slaves = omap2420_dss_dispc_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_dss_dispc_slaves), .flags = HWMOD_NO_IDLEST, + .dev_attr = &omap2_3_dss_dispc_dev_attr }; /* l4_core -> dss_rfbi */ diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 6f03653..c4f56cb 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -1004,6 +1004,7 @@ static struct omap_hwmod omap2430_dss_dispc_hwmod = { .slaves = omap2430_dss_dispc_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_dss_dispc_slaves), .flags = HWMOD_NO_IDLEST, + .dev_attr = &omap2_3_dss_dispc_dev_attr }; /* l4_core -> dss_rfbi */ diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 4aaf0ca..7f8915a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1462,6 +1462,7 @@ static struct omap_hwmod omap3xxx_dss_dispc_hwmod = { .slaves = omap3xxx_dss_dispc_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dispc_slaves), .flags = HWMOD_NO_IDLEST, + .dev_attr = &omap2_3_dss_dispc_dev_attr }; /* diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 3b04d63..daaf165 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1327,6 +1327,11 @@ static struct omap_hwmod_addr_space omap44xx_dss_dispc_addrs[] = { { } }; +static struct omap_dss_dispc_dev_attr omap44xx_dss_dispc_dev_attr = { + .manager_count = 3, + .has_framedonetv_irq = 1 +}; + /* l4_per -> dss_dispc */ static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dispc = { .master = &omap44xx_l4_per_hwmod, @@ -1357,6 +1362,7 @@ static struct omap_hwmod omap44xx_dss_dispc_hwmod = { }, .slaves = omap44xx_dss_dispc_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_dss_dispc_slaves), + .dev_attr = &omap44xx_dss_dispc_dev_attr }; /* diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c index de832eb..51e5418 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c @@ -49,3 +49,7 @@ struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2 = { .srst_shift = SYSC_TYPE2_SOFTRESET_SHIFT, }; +struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr = { + .manager_count = 2, + .has_framedonetv_irq = 0 +}; diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h index 39a7c37..ad5d8f0 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h @@ -16,6 +16,8 @@ #include +#include "display.h" + /* Common address space across OMAP2xxx */ extern struct omap_hwmod_addr_space omap2xxx_uart1_addr_space[]; extern struct omap_hwmod_addr_space omap2xxx_uart2_addr_space[]; @@ -111,4 +113,6 @@ extern struct omap_hwmod_class omap2xxx_dma_hwmod_class; extern struct omap_hwmod_class omap2xxx_mailbox_hwmod_class; extern struct omap_hwmod_class omap2xxx_mcspi_class; +extern struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr; + #endif -- cgit v0.10.2 From f1e10354fc2a12773e5e8efcf841380aa57d4aa5 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sat, 5 Nov 2011 14:47:19 +0800 Subject: ASoC: wm9081: Fix reading wrong register for setting VMID 2*240k VMID Divider Enable and Select is controlled by BIT[2:1] of WM9081_VMID_CONTROL register (04h). Current code reads wrong register (WM9081_BIAS_CONTROL_1) for setting VMID 2*240k. Signed-off-by: Axel Lin Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/wm9081.c b/sound/soc/codecs/wm9081.c index 3cd35a0..fe65618 100644 --- a/sound/soc/codecs/wm9081.c +++ b/sound/soc/codecs/wm9081.c @@ -818,7 +818,7 @@ static int wm9081_set_bias_level(struct snd_soc_codec *codec, } /* VMID 2*240k */ - reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1); + reg = snd_soc_read(codec, WM9081_VMID_CONTROL); reg &= ~WM9081_VMID_SEL_MASK; reg |= 0x04; snd_soc_write(codec, WM9081_VMID_CONTROL, reg); -- cgit v0.10.2 From adf463626ad8e0a2cdbe17d8bb64c1d9d0ac160d Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sat, 5 Nov 2011 14:49:21 +0800 Subject: ASoC: wm9081: Don't write WM9081_BIAS_ENA bit to WM9081_VMID_CONTROL register WM9081_BIAS_ENA is the bit[1] of WM9081_BIAS_CONTROL_1 register (05h). Current code incorrectly write it to WM9081_VMID_CONTROL(04h) register. Signed-off-by: Axel Lin Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/wm9081.c b/sound/soc/codecs/wm9081.c index fe65618..4a398c3 100644 --- a/sound/soc/codecs/wm9081.c +++ b/sound/soc/codecs/wm9081.c @@ -807,7 +807,6 @@ static int wm9081_set_bias_level(struct snd_soc_codec *codec, mdelay(100); /* Normal bias enable & soft start off */ - reg |= WM9081_BIAS_ENA; reg &= ~WM9081_VMID_RAMP; snd_soc_write(codec, WM9081_VMID_CONTROL, reg); @@ -830,14 +829,15 @@ static int wm9081_set_bias_level(struct snd_soc_codec *codec, break; case SND_SOC_BIAS_OFF: - /* Startup bias source */ + /* Startup bias source and disable bias */ reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1); reg |= WM9081_BIAS_SRC; + reg &= ~WM9081_BIAS_ENA; snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg); - /* Disable VMID and biases with soft ramping */ + /* Disable VMID with soft ramping */ reg = snd_soc_read(codec, WM9081_VMID_CONTROL); - reg &= ~(WM9081_VMID_SEL_MASK | WM9081_BIAS_ENA); + reg &= ~WM9081_VMID_SEL_MASK; reg |= WM9081_VMID_RAMP; snd_soc_write(codec, WM9081_VMID_CONTROL, reg); -- cgit v0.10.2 From 042f36e1560cedfe524607791fa44607a3121f63 Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Tue, 8 Nov 2011 13:27:31 -0500 Subject: IB/qib: Don't use schedule_work() It was mistakenly introduced by dde05cbdf8b1 ("IB/qib: Hold links until tuning data is available"). Signed-off-by: Mike Marciniszyn Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c index 5bd2162..8b46b60 100644 --- a/drivers/infiniband/hw/qib/qib_iba7322.c +++ b/drivers/infiniband/hw/qib/qib_iba7322.c @@ -5241,7 +5241,7 @@ static int qib_7322_ib_updown(struct qib_pportdata *ppd, int ibup, u64 ibcs) off */ if (ppd->dd->flags & QIB_HAS_QSFP) { qd->t_insert = get_jiffies_64(); - schedule_work(&qd->work); + queue_work(ib_wq, &qd->work); } spin_lock_irqsave(&ppd->sdma_lock, flags); if (__qib_sdma_running(ppd)) -- cgit v0.10.2 From 76ee4557137ce12a60a1e1a070ed341182163a64 Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Tue, 8 Nov 2011 19:57:59 +0900 Subject: ARM: EXYNOS: Fix compiler error with THIS_MODULE CC arch/arm/mach-exynos/cpuidle.o arch/arm/mach-exynos/cpuidle.c:36: error: 'THIS_MODULE' undeclared here (not in a function) arch/arm/mach-exynos/cpuidle.c: In function 'exynos4_enter_idle': arch/arm/mach-exynos/cpuidle.c:42: error: storage size of 'before' isn't known arch/arm/mach-exynos/cpuidle.c:42: error: storage size of 'after' isn't known arch/arm/mach-exynos/cpuidle.c:46: error: implicit declaration of function 'do_gettimeofday' arch/arm/mach-exynos/cpuidle.c:52: error: 'USEC_PER_SEC' undeclared (first use in this function) arch/arm/mach-exynos/cpuidle.c:52: error: (Each undeclared identifier is reported only once arch/arm/mach-exynos/cpuidle.c:52: error: for each function it appears in.) arch/arm/mach-exynos/cpuidle.c:42: warning: unused variable 'after' arch/arm/mach-exynos/cpuidle.c:42: warning: unused variable 'before' make[1]: *** [arch/arm/mach-exynos/cpuidle.o] Error 1 Signed-off-by: Kyungmin Park [kgene.kim@samsung.com: Fixed as per Stephen's suggestion] Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c index 35f6502..4ebb382 100644 --- a/arch/arm/mach-exynos/cpuidle.c +++ b/arch/arm/mach-exynos/cpuidle.c @@ -12,6 +12,8 @@ #include #include #include +#include +#include #include -- cgit v0.10.2 From 5bb01a991897d74295ff8de548d350400d7370a9 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 9 Nov 2011 15:29:31 -0800 Subject: ARM: OMAP: Fix map_io for Amstrad E3 Commit 7b88e62f5d219a86d81bdf4388012c97dc42e8f8 (ARM: OMAP1: Use generic map_io, init_early and init_irq) changed omap1 to use generic map_io. Looks like I missed one board though. Fix this by adding a custom map_io for Amstrad E3. Reported-by: Aaro Koskinen Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 51bae31..b0f15d2 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -302,8 +302,6 @@ static void __init ams_delta_init(void) omap_cfg_reg(J19_1610_CAM_D6); omap_cfg_reg(J18_1610_CAM_D7); - iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc)); - omap_board_config = ams_delta_config; omap_board_config_size = ARRAY_SIZE(ams_delta_config); omap_serial_init(); @@ -373,10 +371,16 @@ static int __init ams_delta_modem_init(void) } arch_initcall(ams_delta_modem_init); +static void __init ams_delta_map_io(void) +{ + omap15xx_map_io(); + iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc)); +} + MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") /* Maintainer: Jonathan McDowell */ .atag_offset = 0x100, - .map_io = omap15xx_map_io, + .map_io = ams_delta_map_io, .init_early = omap1_init_early, .reserve = omap_reserve, .init_irq = omap1_init_irq, -- cgit v0.10.2 From 3940d6185a982a970ff562e085caccbdd62f40bb Mon Sep 17 00:00:00 2001 From: JJ Ding Date: Tue, 8 Nov 2011 22:13:14 -0800 Subject: Input: elantech - adjust hw_version detection logic MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fixes some v3 hardware (fw_version: 0x150500) wrongly detected as v2 hardware. Reported-by: Marc Dietrich Signed-off-by: JJ Ding Tested-By: Marc Dietrich Acked-by: Éric Piel Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 09b93b1..e2a9867 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1210,18 +1210,28 @@ static int elantech_reconnect(struct psmouse *psmouse) */ static int elantech_set_properties(struct elantech_data *etd) { + /* This represents the version of IC body. */ int ver = (etd->fw_version & 0x0f0000) >> 16; + /* Early version of Elan touchpads doesn't obey the rule. */ if (etd->fw_version < 0x020030 || etd->fw_version == 0x020600) etd->hw_version = 1; - else if (etd->fw_version < 0x150600) - etd->hw_version = 2; - else if (ver == 5) - etd->hw_version = 3; - else if (ver == 6) - etd->hw_version = 4; - else - return -1; + else { + switch (ver) { + case 2: + case 4: + etd->hw_version = 2; + break; + case 5: + etd->hw_version = 3; + break; + case 6: + etd->hw_version = 4; + break; + default: + return -1; + } + } /* * Turn on packet checking by default. -- cgit v0.10.2 From 77f6ca5a6283a5d34c4bd9dc809fec9e37fdd80d Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Wed, 9 Nov 2011 10:13:33 -0800 Subject: Input: ams_delta_serio - include linux/module.h Fix the following compilation failure with v3.2-rc1 by including module.h: CC drivers/input/serio/ams_delta_serio.o drivers/input/serio/ams_delta_serio.c:33:15: error: expected declaration specifiers or '...' before string constant drivers/input/serio/ams_delta_serio.c:34:20: error: expected declaration specifiers or '...' before string constant drivers/input/serio/ams_delta_serio.c:35:16: error: expected declaration specifiers or '...' before string constant drivers/input/serio/ams_delta_serio.c: In function 'ams_delta_serio_init': drivers/input/serio/ams_delta_serio.c:155:2: error: 'THIS_MODULE' undeclared (first use in this function) drivers/input/serio/ams_delta_serio.c:155:2: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by: Aaro Koskinen Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c index 4b2a42f..d4d08bd 100644 --- a/drivers/input/serio/ams_delta_serio.c +++ b/drivers/input/serio/ams_delta_serio.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include -- cgit v0.10.2 From c0a39151a4055332897cba615623d3de2f3896df Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Thu, 10 Nov 2011 07:13:07 +0800 Subject: ARM: pxa: fix inconsistent CONFIG_USB_PXA27X Since CONFIG_USB_GADGET_PXA27X and other macros are renamed to CONFIG_USB_PXA27X. Update them in arch/arm/mach-pxa and arch/arm/configs to keep consistent. Cc: stable@kernel.org Signed-off-by: Haojian Zhuang Acked-by: Felipe Balbi Signed-off-by: Eric Miao diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig index 227a477..d95763d 100644 --- a/arch/arm/configs/ezx_defconfig +++ b/arch/arm/configs/ezx_defconfig @@ -287,7 +287,7 @@ CONFIG_USB=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set CONFIG_MMC=y diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig index 176ec22..fd996bb 100644 --- a/arch/arm/configs/imote2_defconfig +++ b/arch/arm/configs/imote2_defconfig @@ -263,7 +263,7 @@ CONFIG_USB=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set CONFIG_MMC=y diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index a88e64d..443675d 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -132,7 +132,7 @@ CONFIG_USB_MON=m CONFIG_USB_OHCI_HCD=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_VBUS_DRAW=500 -CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set CONFIG_USB_GADGETFS=m diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig index 59577ad..547a3c1 100644 --- a/arch/arm/configs/zeus_defconfig +++ b/arch/arm/configs/zeus_defconfig @@ -140,7 +140,7 @@ CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y CONFIG_USB_SERIAL_MCT_U232=m CONFIG_USB_GADGET=m -CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m CONFIG_USB_FILE_STORAGE=m diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index fc0b854..4b81f59 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -307,7 +307,7 @@ static inline void balloon3_mmc_init(void) {} /****************************************************************************** * USB Gadget ******************************************************************************/ -#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE) +#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE) static void balloon3_udc_command(int cmd) { if (cmd == PXA2XX_UDC_CMD_CONNECT) diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index 692e1ff..d23b92b 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -146,7 +146,7 @@ static void __init colibri_pxa320_init_eth(void) static inline void __init colibri_pxa320_init_eth(void) {} #endif /* CONFIG_AX88796 */ -#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE) +#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE) static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = { .gpio_vbus = mfp_to_gpio(MFP_PIN_GPIO96), .gpio_pullup = -1, diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index 9c8208c..ffdd70d 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -106,7 +106,7 @@ static void __init gumstix_mmc_init(void) } #endif -#ifdef CONFIG_USB_GADGET_PXA25X +#ifdef CONFIG_USB_PXA25X static struct gpio_vbus_mach_info gumstix_udc_info = { .gpio_vbus = GPIO_GUMSTIX_USB_GPIOn, .gpio_pullup = GPIO_GUMSTIX_USB_GPIOx, diff --git a/arch/arm/mach-pxa/include/mach/palm27x.h b/arch/arm/mach-pxa/include/mach/palm27x.h index f80bbe2..d4eac3d 100644 --- a/arch/arm/mach-pxa/include/mach/palm27x.h +++ b/arch/arm/mach-pxa/include/mach/palm27x.h @@ -37,8 +37,8 @@ extern void __init palm27x_lcd_init(int power, #define palm27x_lcd_init(power, mode) do {} while (0) #endif -#if defined(CONFIG_USB_GADGET_PXA27X) || \ - defined(CONFIG_USB_GADGET_PXA27X_MODULE) +#if defined(CONFIG_USB_PXA27X) || \ + defined(CONFIG_USB_PXA27X_MODULE) extern void __init palm27x_udc_init(int vbus, int pullup, int vbus_inverted); #else diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index 325c245..fbc10d7 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -164,8 +164,8 @@ void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode) /****************************************************************************** * USB Gadget ******************************************************************************/ -#if defined(CONFIG_USB_GADGET_PXA27X) || \ - defined(CONFIG_USB_GADGET_PXA27X_MODULE) +#if defined(CONFIG_USB_PXA27X) || \ + defined(CONFIG_USB_PXA27X_MODULE) static struct gpio_vbus_mach_info palm27x_udc_info = { .gpio_vbus_inverted = 1, }; diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index 6ec7cae..2c24c67 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -338,7 +338,7 @@ static inline void palmtc_mkp_init(void) {} /****************************************************************************** * UDC ******************************************************************************/ -#if defined(CONFIG_USB_GADGET_PXA25X)||defined(CONFIG_USB_GADGET_PXA25X_MODULE) +#if defined(CONFIG_USB_PXA25X)||defined(CONFIG_USB_PXA25X_MODULE) static struct gpio_vbus_mach_info palmtc_udc_info = { .gpio_vbus = GPIO_NR_PALMTC_USB_DETECT_N, .gpio_vbus_inverted = 1, diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index a7539a6..ca0c661 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -343,7 +343,7 @@ static inline void vpac270_uhc_init(void) {} /****************************************************************************** * USB Gadget ******************************************************************************/ -#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE) +#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE) static struct gpio_vbus_mach_info vpac270_gpio_vbus_info = { .gpio_vbus = GPIO41_VPAC270_UDC_DETECT, .gpio_pullup = -1, -- cgit v0.10.2 From 98d97019c88bd832da1457729739cf739ece493f Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Thu, 10 Nov 2011 17:19:07 +0530 Subject: MAINTAINERS: Drop inactive Samsung ASoC maintainer Signed-off-by: Jassi Brar Signed-off-by: Mark Brown diff --git a/MAINTAINERS b/MAINTAINERS index c802e5f..fd7e441 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5648,7 +5648,6 @@ F: drivers/media/video/*7146* F: include/media/*7146* SAMSUNG AUDIO (ASoC) DRIVERS -M: Jassi Brar M: Sangbeom Kim L: alsa-devel@alsa-project.org (moderated for non-subscribers) S: Supported -- cgit v0.10.2 From 4415e63b13c68c2f56d16d400a1ae345f68cf655 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Wed, 9 Nov 2011 09:57:50 -0800 Subject: drm/i915: Module parameters using '-1' as default must be signed type Testing i915_panel_use_ssc for the default value was broken, so the driver would never autodetect the correct value. Signed-off-by: Keith Packard Reviewed-by: Michel Alexandre Salim Tested-by: Michel Alexandre Salim Cc: stable@kernel.org diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 548e04b..13488be 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -67,7 +67,7 @@ module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0600); MODULE_PARM_DESC(i915_enable_rc6, "Enable power-saving render C-state 6 (default: true)"); -unsigned int i915_enable_fbc __read_mostly = -1; +int i915_enable_fbc __read_mostly = -1; module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600); MODULE_PARM_DESC(i915_enable_fbc, "Enable frame buffer compression for power savings " @@ -79,7 +79,7 @@ MODULE_PARM_DESC(lvds_downclock, "Use panel (LVDS/eDP) downclocking for power savings " "(default: false)"); -unsigned int i915_panel_use_ssc __read_mostly = -1; +int i915_panel_use_ssc __read_mostly = -1; module_param_named(lvds_use_ssc, i915_panel_use_ssc, int, 0600); MODULE_PARM_DESC(lvds_use_ssc, "Use Spread Spectrum Clock with panels [LVDS/eDP] " diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index d2da91f..4a9c1b9 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1000,10 +1000,10 @@ extern int i915_panel_ignore_lid __read_mostly; extern unsigned int i915_powersave __read_mostly; extern unsigned int i915_semaphores __read_mostly; extern unsigned int i915_lvds_downclock __read_mostly; -extern unsigned int i915_panel_use_ssc __read_mostly; +extern int i915_panel_use_ssc __read_mostly; extern int i915_vbt_sdvo_panel_type __read_mostly; extern unsigned int i915_enable_rc6 __read_mostly; -extern unsigned int i915_enable_fbc __read_mostly; +extern int i915_enable_fbc __read_mostly; extern bool i915_enable_hangcheck __read_mostly; extern int i915_suspend(struct drm_device *dev, pm_message_t state); -- cgit v0.10.2 From d65670a78cdbfae94f20a9e05ec705871d7cdf2b Mon Sep 17 00:00:00 2001 From: John Stultz Date: Mon, 31 Oct 2011 17:06:35 -0400 Subject: clocksource: Avoid selecting mult values that might overflow when adjusted For some frequencies, the clocks_calc_mult_shift() function will unfortunately select mult values very close to 0xffffffff. This has the potential to overflow when NTP adjusts the clock, adding to the mult value. This patch adds a clocksource.maxadj value, which provides an approximation of an 11% adjustment(NTP limits adjustments to 500ppm and the tick adjustment is limited to 10%), which could be made to the clocksource.mult value. This is then used to both check that the current mult value won't overflow/underflow, as well as warning us if the timekeeping_adjust() code pushes over that 11% boundary. v2: Fix max_adjustment calculation, and improve WARN_ONCE messages. v3: Don't warn before maxadj has actually been set CC: Yong Zhang CC: David Daney CC: Thomas Gleixner CC: Chen Jie CC: zhangfx CC: stable@kernel.org Reported-by: Chen Jie Reported-by: zhangfx Tested-by: Yong Zhang Signed-off-by: John Stultz diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index 139c4db..c86c940 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -156,6 +156,7 @@ extern u64 timecounter_cyc2time(struct timecounter *tc, * @mult: cycle to nanosecond multiplier * @shift: cycle to nanosecond divisor (power of two) * @max_idle_ns: max idle time permitted by the clocksource (nsecs) + * @maxadj maximum adjustment value to mult (~11%) * @flags: flags describing special properties * @archdata: arch-specific data * @suspend: suspend function for the clocksource, if necessary @@ -172,7 +173,7 @@ struct clocksource { u32 mult; u32 shift; u64 max_idle_ns; - + u32 maxadj; #ifdef CONFIG_ARCH_CLOCKSOURCE_DATA struct arch_clocksource_data archdata; #endif diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c index cf52fda..cfc65e1 100644 --- a/kernel/time/clocksource.c +++ b/kernel/time/clocksource.c @@ -492,6 +492,22 @@ void clocksource_touch_watchdog(void) } /** + * clocksource_max_adjustment- Returns max adjustment amount + * @cs: Pointer to clocksource + * + */ +static u32 clocksource_max_adjustment(struct clocksource *cs) +{ + u64 ret; + /* + * We won't try to correct for more then 11% adjustments (110,000 ppm), + */ + ret = (u64)cs->mult * 11; + do_div(ret,100); + return (u32)ret; +} + +/** * clocksource_max_deferment - Returns max time the clocksource can be deferred * @cs: Pointer to clocksource * @@ -503,25 +519,28 @@ static u64 clocksource_max_deferment(struct clocksource *cs) /* * Calculate the maximum number of cycles that we can pass to the * cyc2ns function without overflowing a 64-bit signed result. The - * maximum number of cycles is equal to ULLONG_MAX/cs->mult which - * is equivalent to the below. - * max_cycles < (2^63)/cs->mult - * max_cycles < 2^(log2((2^63)/cs->mult)) - * max_cycles < 2^(log2(2^63) - log2(cs->mult)) - * max_cycles < 2^(63 - log2(cs->mult)) - * max_cycles < 1 << (63 - log2(cs->mult)) + * maximum number of cycles is equal to ULLONG_MAX/(cs->mult+cs->maxadj) + * which is equivalent to the below. + * max_cycles < (2^63)/(cs->mult + cs->maxadj) + * max_cycles < 2^(log2((2^63)/(cs->mult + cs->maxadj))) + * max_cycles < 2^(log2(2^63) - log2(cs->mult + cs->maxadj)) + * max_cycles < 2^(63 - log2(cs->mult + cs->maxadj)) + * max_cycles < 1 << (63 - log2(cs->mult + cs->maxadj)) * Please note that we add 1 to the result of the log2 to account for * any rounding errors, ensure the above inequality is satisfied and * no overflow will occur. */ - max_cycles = 1ULL << (63 - (ilog2(cs->mult) + 1)); + max_cycles = 1ULL << (63 - (ilog2(cs->mult + cs->maxadj) + 1)); /* * The actual maximum number of cycles we can defer the clocksource is * determined by the minimum of max_cycles and cs->mask. + * Note: Here we subtract the maxadj to make sure we don't sleep for + * too long if there's a large negative adjustment. */ max_cycles = min_t(u64, max_cycles, (u64) cs->mask); - max_nsecs = clocksource_cyc2ns(max_cycles, cs->mult, cs->shift); + max_nsecs = clocksource_cyc2ns(max_cycles, cs->mult - cs->maxadj, + cs->shift); /* * To ensure that the clocksource does not wrap whilst we are idle, @@ -640,7 +659,6 @@ static void clocksource_enqueue(struct clocksource *cs) void __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq) { u64 sec; - /* * Calc the maximum number of seconds which we can run before * wrapping around. For clocksources which have a mask > 32bit @@ -661,6 +679,20 @@ void __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq) clocks_calc_mult_shift(&cs->mult, &cs->shift, freq, NSEC_PER_SEC / scale, sec * scale); + + /* + * for clocksources that have large mults, to avoid overflow. + * Since mult may be adjusted by ntp, add an safety extra margin + * + */ + cs->maxadj = clocksource_max_adjustment(cs); + while ((cs->mult + cs->maxadj < cs->mult) + || (cs->mult - cs->maxadj > cs->mult)) { + cs->mult >>= 1; + cs->shift--; + cs->maxadj = clocksource_max_adjustment(cs); + } + cs->max_idle_ns = clocksource_max_deferment(cs); } EXPORT_SYMBOL_GPL(__clocksource_updatefreq_scale); @@ -701,6 +733,12 @@ EXPORT_SYMBOL_GPL(__clocksource_register_scale); */ int clocksource_register(struct clocksource *cs) { + /* calculate max adjustment for given mult/shift */ + cs->maxadj = clocksource_max_adjustment(cs); + WARN_ONCE(cs->mult + cs->maxadj < cs->mult, + "Clocksource %s might overflow on 11%% adjustment\n", + cs->name); + /* calculate max idle time permitted for this clocksource */ cs->max_idle_ns = clocksource_max_deferment(cs); diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 2b021b0e..e65ff31 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -820,6 +820,13 @@ static void timekeeping_adjust(s64 offset) } else return; + WARN_ONCE(timekeeper.clock->maxadj && + (timekeeper.mult + adj > timekeeper.clock->mult + + timekeeper.clock->maxadj), + "Adjusting %s more then 11%% (%ld vs %ld)\n", + timekeeper.clock->name, (long)timekeeper.mult + adj, + (long)timekeeper.clock->mult + + timekeeper.clock->maxadj); timekeeper.mult += adj; timekeeper.xtime_interval += interval; timekeeper.xtime_nsec -= offset; -- cgit v0.10.2 From 2aa13531bbbc6582874bedfcd853e1058b0fb4f9 Mon Sep 17 00:00:00 2001 From: Stanislav Kinsbursky Date: Thu, 10 Nov 2011 14:33:23 +0300 Subject: SUNRPC: destroy freshly allocated transport in case of sockaddr init error Otherwise we will leak xprt structure and struct net reference. Signed-off-by: Stanislav Kinsbursky Signed-off-by: Trond Myklebust diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index d7f97ef..2d78d95 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -2530,8 +2530,10 @@ static struct rpc_xprt *xs_setup_xprt(struct xprt_create *args, int err; err = xs_init_anyaddr(args->dstaddr->sa_family, (struct sockaddr *)&new->srcaddr); - if (err != 0) + if (err != 0) { + xprt_free(xprt); return ERR_PTR(err); + } } return xprt; -- cgit v0.10.2 From 62e4a76987eab2b7fa952546614bc83e5bfc9d3e Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 10 Nov 2011 14:30:37 -0500 Subject: NFS: Revert pnfs ugliness from the generic NFS read code path pNFS-specific code belongs in the pnfs layer. It should not be hijacking generic NFS read or write code paths. Signed-off-by: Trond Myklebust diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h index c1a1bd8..3f4d957 100644 --- a/fs/nfs/internal.h +++ b/fs/nfs/internal.h @@ -299,6 +299,8 @@ extern void nfs_read_prepare(struct rpc_task *task, void *calldata); extern int nfs_generic_pagein(struct nfs_pageio_descriptor *desc, struct list_head *head); +extern void nfs_pageio_init_read_mds(struct nfs_pageio_descriptor *pgio, + struct inode *inode); extern void nfs_pageio_reset_read_mds(struct nfs_pageio_descriptor *pgio); extern void nfs_readdata_release(struct nfs_read_data *rdata); diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index a2478bc..e40a3ca 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -1259,6 +1259,25 @@ pnfs_generic_pg_writepages(struct nfs_pageio_descriptor *desc) } EXPORT_SYMBOL_GPL(pnfs_generic_pg_writepages); +static void pnfs_ld_handle_read_error(struct nfs_read_data *data) +{ + struct nfs_pageio_descriptor pgio; + + put_lseg(data->lseg); + data->lseg = NULL; + dprintk("pnfs write error = %d\n", data->pnfs_error); + + nfs_pageio_init_read_mds(&pgio, data->inode); + + while (!list_empty(&data->pages)) { + struct nfs_page *req = nfs_list_entry(data->pages.next); + + nfs_list_remove_request(req); + nfs_pageio_add_request(&pgio, req); + } + nfs_pageio_complete(&pgio); +} + /* * Called by non rpc-based layout drivers */ @@ -1267,11 +1286,8 @@ void pnfs_ld_read_done(struct nfs_read_data *data) if (likely(!data->pnfs_error)) { __nfs4_read_done_cb(data); data->mds_ops->rpc_call_done(&data->task, data); - } else { - put_lseg(data->lseg); - data->lseg = NULL; - dprintk("pnfs write error = %d\n", data->pnfs_error); - } + } else + pnfs_ld_handle_read_error(data); data->mds_ops->rpc_release(data); } EXPORT_SYMBOL_GPL(pnfs_ld_read_done); diff --git a/fs/nfs/read.c b/fs/nfs/read.c index 8b48ec6..cfa175c 100644 --- a/fs/nfs/read.c +++ b/fs/nfs/read.c @@ -109,7 +109,7 @@ static void nfs_readpage_truncate_uninitialised_page(struct nfs_read_data *data) } } -static void nfs_pageio_init_read_mds(struct nfs_pageio_descriptor *pgio, +void nfs_pageio_init_read_mds(struct nfs_pageio_descriptor *pgio, struct inode *inode) { nfs_pageio_init(pgio, inode, &nfs_pageio_read_ops, @@ -534,23 +534,13 @@ static void nfs_readpage_result_full(struct rpc_task *task, void *calldata) static void nfs_readpage_release_full(void *calldata) { struct nfs_read_data *data = calldata; - struct nfs_pageio_descriptor pgio; - if (data->pnfs_error) { - nfs_pageio_init_read_mds(&pgio, data->inode); - pgio.pg_recoalesce = 1; - } while (!list_empty(&data->pages)) { struct nfs_page *req = nfs_list_entry(data->pages.next); nfs_list_remove_request(req); - if (!data->pnfs_error) - nfs_readpage_release(req); - else - nfs_pageio_add_request(&pgio, req); + nfs_readpage_release(req); } - if (data->pnfs_error) - nfs_pageio_complete(&pgio); nfs_readdata_release(calldata); } -- cgit v0.10.2 From 7be620f79714b6598275bd5c71d89bb24dfe332e Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 10 Nov 2011 12:12:55 -0800 Subject: ARM: OMAP: Fix dpll_data compile error when omap2 only is selected Without this patch we get the following error: arch/arm/mach-omap2/clkt_dpll.c: In function '_dpll_test_fint': arch/arm/mach-omap2/clkt_dpll.c:98: error: 'struct dpll_data' has no member named 'flags' Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index 197ca03..eb73ab4 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -165,8 +165,8 @@ struct dpll_data { u8 auto_recal_bit; u8 recal_en_bit; u8 recal_st_bit; - u8 flags; # endif + u8 flags; }; #endif -- cgit v0.10.2 From 6a53fc531dcf4719e80d0152ca044e35b0f92591 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 25 Aug 2011 08:52:36 -0300 Subject: ARM: imx: Remove unused chip revision strings Since commit (167a19d2: ARM: imx: Introduce generic function for displaying silicon revision) we no longer need the chip revision strings, so remove them. Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h index 00a7819..a4d36d6 100644 --- a/arch/arm/plat-mxc/include/mach/mxc.h +++ b/arch/arm/plat-mxc/include/mach/mxc.h @@ -50,20 +50,6 @@ #define IMX_CHIP_REVISION_3_3 0x33 #define IMX_CHIP_REVISION_UNKNOWN 0xff -#define IMX_CHIP_REVISION_1_0_STRING "1.0" -#define IMX_CHIP_REVISION_1_1_STRING "1.1" -#define IMX_CHIP_REVISION_1_2_STRING "1.2" -#define IMX_CHIP_REVISION_1_3_STRING "1.3" -#define IMX_CHIP_REVISION_2_0_STRING "2.0" -#define IMX_CHIP_REVISION_2_1_STRING "2.1" -#define IMX_CHIP_REVISION_2_2_STRING "2.2" -#define IMX_CHIP_REVISION_2_3_STRING "2.3" -#define IMX_CHIP_REVISION_3_0_STRING "3.0" -#define IMX_CHIP_REVISION_3_1_STRING "3.1" -#define IMX_CHIP_REVISION_3_2_STRING "3.2" -#define IMX_CHIP_REVISION_3_3_STRING "3.3" -#define IMX_CHIP_REVISION_UNKNOWN_STRING "unknown" - #ifndef __ASSEMBLY__ extern unsigned int __mxc_cpu_type; #endif -- cgit v0.10.2 From 8c6d8319eca370f804fb8e1fcf7070b587d1b81d Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Fri, 11 Nov 2011 13:09:18 +0800 Subject: arm/imx: remove imx_idle hook and use pm_idle instead The patch removes imx_idle hook and use pm_idle instead to get imx arch_idle prepared for the cleanup. It's suggested by Russel King as below. > The final removal of mach/system.h depends on getting rid of the arch_idle > thing. While going through these headers, I was dismayed to find these: > > arch/arm/mach-s3c2410/include/mach/system.h:void (*s3c24xx_idle)(void); > arch/arm/plat-mxc/include/mach/system.h:extern void (*imx_idle)(void); > > when we have a perfectly good pm_idle hook already in place - so there's > no excuse for these especially when other platforms are already using > pm_idle to hook their platform specific idle function into. This is > something that better be gone at the next merge window! Suggested-by: Russell King Signed-off-by: Shawn Guo Acked-by: Russell King Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 9f0e82e..6d01de3 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -33,29 +33,32 @@ static void imx3_idle(void) { unsigned long reg = 0; - __asm__ __volatile__( - /* disable I and D cache */ - "mrc p15, 0, %0, c1, c0, 0\n" - "bic %0, %0, #0x00001000\n" - "bic %0, %0, #0x00000004\n" - "mcr p15, 0, %0, c1, c0, 0\n" - /* invalidate I cache */ - "mov %0, #0\n" - "mcr p15, 0, %0, c7, c5, 0\n" - /* clear and invalidate D cache */ - "mov %0, #0\n" - "mcr p15, 0, %0, c7, c14, 0\n" - /* WFI */ - "mov %0, #0\n" - "mcr p15, 0, %0, c7, c0, 4\n" - "nop\n" "nop\n" "nop\n" "nop\n" - "nop\n" "nop\n" "nop\n" - /* enable I and D cache */ - "mrc p15, 0, %0, c1, c0, 0\n" - "orr %0, %0, #0x00001000\n" - "orr %0, %0, #0x00000004\n" - "mcr p15, 0, %0, c1, c0, 0\n" - : "=r" (reg)); + + if (!need_resched()) + __asm__ __volatile__( + /* disable I and D cache */ + "mrc p15, 0, %0, c1, c0, 0\n" + "bic %0, %0, #0x00001000\n" + "bic %0, %0, #0x00000004\n" + "mcr p15, 0, %0, c1, c0, 0\n" + /* invalidate I cache */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c5, 0\n" + /* clear and invalidate D cache */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c14, 0\n" + /* WFI */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c0, 4\n" + "nop\n" "nop\n" "nop\n" "nop\n" + "nop\n" "nop\n" "nop\n" + /* enable I and D cache */ + "mrc p15, 0, %0, c1, c0, 0\n" + "orr %0, %0, #0x00001000\n" + "orr %0, %0, #0x00000004\n" + "mcr p15, 0, %0, c1, c0, 0\n" + : "=r" (reg)); + local_irq_enable(); } static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size, @@ -143,7 +146,7 @@ void __init imx31_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX31); mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); - imx_idle = imx3_idle; + pm_idle = imx3_idle; imx_ioremap = imx3_ioremap; } @@ -152,7 +155,7 @@ void __init imx35_init_early(void) mxc_set_cpu_type(MXC_CPU_MX35); mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); - imx_idle = imx3_idle; + pm_idle = imx3_idle; imx_ioremap = imx3_ioremap; } diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c index 26eacc9..df4a508f 100644 --- a/arch/arm/mach-mx5/mm.c +++ b/arch/arm/mach-mx5/mm.c @@ -23,7 +23,9 @@ static void imx5_idle(void) { - mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); + if (!need_resched()) + mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); + local_irq_enable(); } /* @@ -89,7 +91,7 @@ void __init imx51_init_early(void) mxc_set_cpu_type(MXC_CPU_MX51); mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR)); - imx_idle = imx5_idle; + pm_idle = imx5_idle; } void __init imx53_init_early(void) diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 83b745a..7143d52 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -85,7 +85,6 @@ enum mxc_cpu_pwr_mode { }; extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode); -extern void (*imx_idle)(void); extern void imx_print_silicon_rev(const char *cpu, int srev); void avic_handle_irq(struct pt_regs *); diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h index cf88b35..b9895d2 100644 --- a/arch/arm/plat-mxc/include/mach/system.h +++ b/arch/arm/plat-mxc/include/mach/system.h @@ -17,14 +17,9 @@ #ifndef __ASM_ARCH_MXC_SYSTEM_H__ #define __ASM_ARCH_MXC_SYSTEM_H__ -extern void (*imx_idle)(void); - static inline void arch_idle(void) { - if (imx_idle != NULL) - (imx_idle)(); - else - cpu_do_idle(); + cpu_do_idle(); } void arch_reset(char mode, const char *cmd); diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c index 9dad8dc..a0bcccf 100644 --- a/arch/arm/plat-mxc/system.c +++ b/arch/arm/plat-mxc/system.c @@ -28,7 +28,6 @@ #include #include -void (*imx_idle)(void) = NULL; void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int) = NULL; static void __iomem *wdog_base; -- cgit v0.10.2 From 0027cb3e1947d0f453fece40ed16764fb362bac6 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Thu, 10 Nov 2011 16:40:37 +0900 Subject: PCI: pciehp: wait 1000 ms before Link Training check We need to wait for 1000 ms after Data Link Layer Link Active (DLLLA) bit reads 1b before sending configuration request. Currently pciehp does this wait after checking Link Training (LT) bit. But we need it before checking LT bit because LT is still set even after DLLLA bit is set on some platforms. Acked-by: Yinghai Lu Tested-by: Yinghai Lu Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index 1e9c9aa..085dbb5 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -213,9 +213,6 @@ static int board_added(struct slot *p_slot) goto err_exit; } - /* Wait for 1 second after checking link training status */ - msleep(1000); - /* Check for a power fault */ if (ctrl->power_fault_detected || pciehp_query_power_fault(p_slot)) { ctrl_err(ctrl, "Power fault on slot %s\n", slot_name(p_slot)); diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 6692832..81a177a 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -280,6 +280,14 @@ int pciehp_check_link_status(struct controller *ctrl) else msleep(1000); + /* + * Need to wait for 1000 ms after Data Link Layer Link Active + * (DLLLA) bit reads 1b before sending configuration request. + * We need it before checking Link Training (LT) bit becuase + * LT is still set even after DLLLA bit is set on some platform. + */ + msleep(1000); + retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status); if (retval) { ctrl_err(ctrl, "Cannot read LNKSTATUS register\n"); -- cgit v0.10.2 From b3c004542229099e18198061c737e13eafc8d4d6 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Thu, 10 Nov 2011 16:42:16 +0900 Subject: PCI: pciehp: wait 100 ms after Link Training check If the port supports Link speeds greater than 5.0 GT/s, we must wait for 100 ms after Link training completes before sending configuration request. Acked-by: Yinghai Lu Tested-by: Yinghai Lu Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 81a177a..7b14148 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -302,6 +302,14 @@ int pciehp_check_link_status(struct controller *ctrl) return retval; } + /* + * If the port supports Link speeds greater than 5.0 GT/s, we + * must wait for 100 ms after Link training completes before + * sending configuration request. + */ + if (ctrl->pcie->port->subordinate->max_bus_speed > PCIE_SPEED_5_0GT) + msleep(100); + pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status); return retval; -- cgit v0.10.2 From 774ac21da76f5c3018428725074e27a3fd40b128 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 11 Nov 2011 09:48:08 -0800 Subject: ceph: initialize root dentry Set up d_fsdata on the root dentry. This fixes a NULL pointer dereference in ceph_d_prune on umount. It also means we can eventually strip out all of the conditional checks on d_fsdata because it is now set unconditionally (prior to setting up the d_ops). Fix the ceph_d_prune debug print while we're here. Signed-off-by: Sage Weil diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c index 2abd0df..bca3948 100644 --- a/fs/ceph/dir.c +++ b/fs/ceph/dir.c @@ -1143,7 +1143,7 @@ static void ceph_d_prune(struct dentry *dentry) { struct ceph_dentry_info *di; - dout("d_release %p\n", dentry); + dout("ceph_d_prune %p\n", dentry); /* do we have a valid parent? */ if (!dentry->d_parent || IS_ROOT(dentry)) diff --git a/fs/ceph/super.c b/fs/ceph/super.c index a90846f..8dc73a5 100644 --- a/fs/ceph/super.c +++ b/fs/ceph/super.c @@ -638,10 +638,12 @@ static struct dentry *open_root_dentry(struct ceph_fs_client *fsc, if (err == 0) { dout("open_root_inode success\n"); if (ceph_ino(req->r_target_inode) == CEPH_INO_ROOT && - fsc->sb->s_root == NULL) + fsc->sb->s_root == NULL) { root = d_alloc_root(req->r_target_inode); - else + ceph_init_dentry(root); + } else { root = d_obtain_alias(req->r_target_inode); + } req->r_target_inode = NULL; dout("open_root_inode success, root dentry is %p\n", root); } else { -- cgit v0.10.2 From 224736d9113ab4a7cf3f05c05377492bd99b4b02 Mon Sep 17 00:00:00 2001 From: Stratos Psomadakis Date: Thu, 10 Nov 2011 15:45:37 +0200 Subject: libceph: Allocate larger oid buffer in request msgs ceph_osd_request struct allocates a 40-byte buffer for object names. RBD image names can be up to 96 chars long (100 with the .rbd suffix), which results in the object name for the image being truncated, and a subsequent map failure. Increase the oid buffer in request messages, in order to avoid the truncation. Signed-off-by: Stratos Psomadakis Signed-off-by: Sage Weil diff --git a/include/linux/ceph/osd_client.h b/include/linux/ceph/osd_client.h index f88eacb..7c05ac2 100644 --- a/include/linux/ceph/osd_client.h +++ b/include/linux/ceph/osd_client.h @@ -10,6 +10,12 @@ #include "osdmap.h" #include "messenger.h" +/* + * Maximum object name size + * (must be at least as big as RBD_MAX_MD_NAME_LEN -- currently 100) + */ +#define MAX_OBJ_NAME_SIZE 100 + struct ceph_msg; struct ceph_snap_context; struct ceph_osd_request; @@ -75,7 +81,7 @@ struct ceph_osd_request { struct inode *r_inode; /* for use by callbacks */ void *r_priv; /* ditto */ - char r_oid[40]; /* object name */ + char r_oid[MAX_OBJ_NAME_SIZE]; /* object name */ int r_oid_len; unsigned long r_stamp; /* send OR check time */ diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c index 733e4600..f4f3f58 100644 --- a/net/ceph/osd_client.c +++ b/net/ceph/osd_client.c @@ -244,7 +244,7 @@ struct ceph_osd_request *ceph_osdc_alloc_request(struct ceph_osd_client *osdc, ceph_pagelist_init(req->r_trail); } /* create request message; allow space for oid */ - msg_size += 40; + msg_size += MAX_OBJ_NAME_SIZE; if (snapc) msg_size += sizeof(u64) * snapc->num_snaps; if (use_mempool) -- cgit v0.10.2 From e9b7086b80c4d9e354f4edc9e280ae85a60df408 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 11 Nov 2011 10:15:11 -0800 Subject: ARM: OMAP: Fix reprogramming of dpll1 rate Commit a66cb3454f220f49f900646ebdc76cb943319eb7 (ARM: OMAP: Map SRAM later on with ioremap_exec()) moved the SRAM init to happen later to remove a dependency to early SoC detection for map_io. This broke booting on some boards not using Kconfig option for OMAP_CLOCKS_SET_BY_BOOTLOADER as the dpll1 reprogramming would cause the following error: kernel BUG at arch/arm/plat-omap/sram.c:226! Internal error: Oops - undefined instruction: 0 [#1] PREEMPT Modules linked in: CPU: 0 Not tainted (3.2.0-rc1-e3 #9) PC is at omap_sram_reprogram_clock+0x28/0x30 LR is at omap1_select_table_rate+0x88/0xb4 pc : [] lr : [] psr: 600000d3 sp : c035bf10 ip : c035bf20 fp : c035bf1c r10: c035bfd4 r9 : 54029252 r8 : c03f8120 r7 : c0362b50 r6 : 00b71b00 r5 : c03873cc r4 : c0362b40 r3 : 00000000 r2 : c0362b40 r1 : 0000010a r0 : 00002cb0 Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel Control: 0000317f Table: 10004000 DAC: 00000017 Process swapper (pid: 0, stack limit = 0xc035a270) Stack: (0xc035bf10 to 0xc035c000) bf00: c035bf3c c035bf20 c0019f54 c001b0ac bf20: 00001000 00002cb3 00000004 c035ed4c c035bf74 c035bf40 c033ea24 c0019edc bf40: c02f526c 00000002 00000015 bc058c9b 93111a16 c035335c 02000000 c035ed4c bf60: c035ed4c c03f8120 c035bf84 c035bf78 c00194c4 c033e8ec c035bfc4 c035bf88 bf80: c033bc24 c00194a0 c035bf90 c035bf98 00000000 00000000 00000000 00000000 bfa0: 00000001 00000000 c0354678 c035ece4 10004000 103532f4 c035bff4 c035bfc8 bfc0: c0338574 c033b598 00000000 00000000 00000000 c035467c 0000317d c035c03c bfe0: c0354678 c035ece4 00000000 c035bff8 10008040 c0338508 00000000 00000000 Backtrace: [] (omap_sram_reprogram_clock+0x0/0x30) from [] (omap1_select_table_rate+0x88/0xb4) [] (omap1_select_table_rate+0x0/0xb4) from [] (omap1_clk_init+0x148/0x334) r7:c035ed4c r6:00000004 r5:00002cb3 r4:00001000 [] (omap1_clk_init+0x0/0x334) from [] (omap1_init_early+0x34/0x48) r8:c03f8120 r7:c035ed4c r6:c035ed4c r5:02000000 r4:c035335c [] (omap1_init_early+0x0/0x48) from [] (setup_arch+0x69c/0x79c) [] (setup_arch+0x0/0x79c) from [] (start_kernel+0x7c/0x2f4) [] (start_kernel+0x0/0x2f4) from [<10008040>] (0x10008040) r7:c035ece4 r6:c0354678 r5:c035c03c r4:0000317d Code: 0a000002 e1a0e00f e12fff13 e89da800 (e7f001f2) Fix this by adding omap1_clk_late_init() that only reprograms dpll1 if the bootloader rate is less than 60MHz. This also allows removing of the OMAP_CLOCKS_SET_BY_BOOTLOADER option. Reported-by: Aaro Koskinen Tested-by: Aaro Koskinen Signed-off-by: Tony Lindgren diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 7b63462..a7e7775 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -48,7 +48,6 @@ CONFIG_MACH_SX1=y CONFIG_MACH_NOKIA770=y CONFIG_MACH_AMS_DELTA=y CONFIG_MACH_OMAP_GENERIC=y -CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y CONFIG_OMAP_ARM_216MHZ=y CONFIG_OMAP_ARM_195MHZ=y CONFIG_OMAP_ARM_192MHZ=y diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index e0a0281..73f287d 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -171,14 +171,6 @@ config MACH_OMAP_GENERIC comment "OMAP CPU Speed" depends on ARCH_OMAP1 -config OMAP_CLOCKS_SET_BY_BOOTLOADER - bool "OMAP clocks set by bootloader" - depends on ARCH_OMAP1 - help - Enable this option to prevent the kernel from overriding the clock - frequencies programmed by bootloader for MPU, DSP, MMUs, TC, - internal LCD controller and MPU peripherals. - config OMAP_ARM_216MHZ bool "OMAP ARM 216 MHz CPU (1710 only)" depends on ARCH_OMAP1 && ARCH_OMAP16XX diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index eaf09ef..16b1423 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -17,7 +17,8 @@ #include -extern int __init omap1_clk_init(void); +int omap1_clk_init(void); +void omap1_clk_late_init(void); extern int omap1_clk_enable(struct clk *clk); extern void omap1_clk_disable(struct clk *clk); extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate); diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 92400b9..1297bb5 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -767,6 +767,15 @@ static struct clk_functions omap1_clk_functions = { .clk_disable_unused = omap1_clk_disable_unused, }; +static void __init omap1_show_rates(void) +{ + pr_notice("Clocking rate (xtal/DPLL1/MPU): " + "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", + ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, + ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, + arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); +} + int __init omap1_clk_init(void) { struct omap_clk *c; @@ -835,9 +844,12 @@ int __init omap1_clk_init(void) /* We want to be in syncronous scalable mode */ omap_writew(0x1000, ARM_SYSST); -#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER - /* Use values set by bootloader. Determine PLL rate and recalculate - * dependent clocks as if kernel had changed PLL or divisors. + + /* + * Initially use the values set by bootloader. Determine PLL rate and + * recalculate dependent clocks as if kernel had changed PLL or + * divisors. See also omap1_clk_late_init() that can reprogram dpll1 + * after the SRAM is initialized. */ { unsigned pll_ctl_val = omap_readw(DPLL_CTL); @@ -862,25 +874,10 @@ int __init omap1_clk_init(void) } } } -#else - /* Find the highest supported frequency and enable it */ - if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { - printk(KERN_ERR "System frequencies not set. Check your config.\n"); - /* Guess sane values (60MHz) */ - omap_writew(0x2290, DPLL_CTL); - omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL); - ck_dpll1.rate = 60000000; - } -#endif propagate_rate(&ck_dpll1); /* Cache rates for clocks connected to ck_ref (not dpll1) */ propagate_rate(&ck_ref); - printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): " - "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", - ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, - ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, - arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); - + omap1_show_rates(); if (machine_is_omap_perseus2() || machine_is_omap_fsample()) { /* Select slicer output as OMAP input clock */ omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, @@ -925,3 +922,21 @@ int __init omap1_clk_init(void) return 0; } + +#define OMAP1_DPLL1_SANE_VALUE 60000000 + +void __init omap1_clk_late_init(void) +{ + if (ck_dpll1.rate >= OMAP1_DPLL1_SANE_VALUE) + return; + + /* Find the highest supported frequency and enable it */ + if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { + pr_err("System frequencies not set, using default. Check your config.\n"); + omap_writew(0x2290, DPLL_CTL); + omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL); + ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE; + } + propagate_rate(&ck_dpll1); + omap1_show_rates(); +} diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 48ef988..475cb2f 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -30,6 +30,8 @@ #include #include +#include "clock.h" + /*-------------------------------------------------------------------------*/ #if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE) @@ -293,6 +295,7 @@ static int __init omap1_init_devices(void) return -ENODEV; omap_sram_init(); + omap1_clk_late_init(); /* please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. -- cgit v0.10.2 From 22f4cb4bd06db14912f69039917422fe0c5b11fb Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Wed, 9 Nov 2011 10:47:21 +0800 Subject: ARM: mmp: fix build error on gpio MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Parameters of GPIO_REG() should be assigned as volatile. arch/arm/plat-pxa/include/plat/gpio.h: In function ‘gpio_get_value’: arch/arm/plat-pxa/include/plat/gpio.h:12:21: error: invalid operands to binary & (have ‘void *’ and ‘int’) arch/arm/plat-pxa/include/plat/gpio.h: In function ‘gpio_set_value’: arch/arm/plat-pxa/include/plat/gpio.h:21:4: error: lvalue required as left operand of assignment arch/arm/plat-pxa/include/plat/gpio.h:23:4: error: lvalue required as left operand of assignment Signed-off-by: Haojian Zhuang Signed-off-by: Eric Miao diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h index d14eeaf..99b4ce1 100644 --- a/arch/arm/mach-mmp/include/mach/gpio-pxa.h +++ b/arch/arm/mach-mmp/include/mach/gpio-pxa.h @@ -7,7 +7,7 @@ #define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000) #define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) -#define GPIO_REG(x) (GPIO_REGS_VIRT + (x)) +#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x))) #define NR_BUILTIN_GPIO IRQ_GPIO_NUM -- cgit v0.10.2 From 4cac2eb158c6da0c761689345c6cc5df788a6292 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 23 Aug 2011 10:16:43 -0600 Subject: PCI hotplug: shpchp: don't blindly claim non-AMD 0x7450 device IDs Previously we claimed device ID 0x7450, regardless of the vendor, which is clearly wrong. Now we'll claim that device ID only for AMD. I suspect this was just a typo in the original code, but it's possible this change will break shpchp on non-7450 AMD bridges. If so, we'll have to fix them as we find them. Reference: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=638863 Reported-by: Ralf Jung Cc: Joerg Roedel Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index aca972b..dd7e0c5 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -278,8 +278,8 @@ static int get_adapter_status (struct hotplug_slot *hotplug_slot, u8 *value) static int is_shpc_capable(struct pci_dev *dev) { - if ((dev->vendor == PCI_VENDOR_ID_AMD) || (dev->device == - PCI_DEVICE_ID_AMD_GOLAM_7450)) + if (dev->vendor == PCI_VENDOR_ID_AMD && + dev->device == PCI_DEVICE_ID_AMD_GOLAM_7450) return 1; if (!pci_find_capability(dev, PCI_CAP_ID_SHPC)) return 0; diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c index 36547f0..75ba231 100644 --- a/drivers/pci/hotplug/shpchp_hpc.c +++ b/drivers/pci/hotplug/shpchp_hpc.c @@ -944,8 +944,8 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev) ctrl->pci_dev = pdev; /* pci_dev of the P2P bridge */ ctrl_dbg(ctrl, "Hotplug Controller:\n"); - if ((pdev->vendor == PCI_VENDOR_ID_AMD) || (pdev->device == - PCI_DEVICE_ID_AMD_GOLAM_7450)) { + if (pdev->vendor == PCI_VENDOR_ID_AMD && + pdev->device == PCI_DEVICE_ID_AMD_GOLAM_7450) { /* amd shpc driver doesn't use Base Offset; assume 0 */ ctrl->mmio_base = pci_resource_start(pdev, 0); ctrl->mmio_size = pci_resource_len(pdev, 0); -- cgit v0.10.2 From 1d91a96268a0b2d7301c3ee67a784b712f34010f Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 8 Sep 2011 14:11:17 +0300 Subject: usb: gadget: udc-core: fix bug on soft_connect and srp interfaces We should not be using dev_get_drvdata() because we never call dev_set_drvdata(). Let's use container_of() as all other sysfs attributes. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index 022baec..31e410b 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -344,7 +344,7 @@ EXPORT_SYMBOL_GPL(usb_gadget_unregister_driver); static ssize_t usb_udc_srp_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) { - struct usb_udc *udc = dev_get_drvdata(dev); + struct usb_udc *udc = container_of(dev, struct usb_udc, dev); if (sysfs_streq(buf, "1")) usb_gadget_wakeup(udc->gadget); -- cgit v0.10.2 From 3c2d636a1c6f1f84adf77737ca716f956595ae80 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Sun, 2 Oct 2011 21:46:47 +0300 Subject: usb: musb: gadget: don't call ->disconnect() on exit that has already being done by udc-core.c. It's unnecessary and might cause issues with some gadget drivers. Tested: Ajay Kumar Gupta Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index ae4a20a..d51043a 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1999,10 +1999,6 @@ static void stop_activity(struct musb *musb, struct usb_gadget_driver *driver) nuke(&hw_ep->ep_out, -ESHUTDOWN); } } - - spin_unlock(&musb->lock); - driver->disconnect(&musb->g); - spin_lock(&musb->lock); } } -- cgit v0.10.2 From 6f39504de55ef69bb8d9d0a645949c5d0407faab Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 3 Oct 2011 16:39:30 +0300 Subject: usb: gadget: core: fix bug when removing gadget drivers usb_gadget_disconnect() is responsible of removing data pullups. Before doing that we must, first, tell gadget driver we're disconnecting (by calling disconnect method on gadget driver structure), unbind the gadget driver and stop the controller. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index 31e410b..4c5ff14 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -210,10 +210,10 @@ static void usb_gadget_remove_driver(struct usb_udc *udc) kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE); if (udc_is_newstyle(udc)) { - usb_gadget_disconnect(udc->gadget); + udc->driver->disconnect(udc->gadget); udc->driver->unbind(udc->gadget); usb_gadget_udc_stop(udc->gadget, udc->driver); - + usb_gadget_disconnect(udc->gadget); } else { usb_gadget_stop(udc->gadget, udc->driver); } -- cgit v0.10.2 From 59d81f8139bff0c2a94971ceec41edd42f16ed47 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 3 Oct 2011 16:43:56 +0300 Subject: usb: gadget: core: allow everybody to read sysfs attributes Those are simply giving information about the current state of the UDC, nothing really fancy. We can let everybody read those. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index 4c5ff14..6939e17 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -378,7 +378,7 @@ static ssize_t usb_udc_speed_show(struct device *dev, return snprintf(buf, PAGE_SIZE, "%s\n", usb_speed_string(udc->gadget->speed)); } -static DEVICE_ATTR(speed, S_IRUSR, usb_udc_speed_show, NULL); +static DEVICE_ATTR(speed, S_IRUGO, usb_udc_speed_show, NULL); #define USB_UDC_ATTR(name) \ ssize_t usb_udc_##name##_show(struct device *dev, \ @@ -389,7 +389,7 @@ ssize_t usb_udc_##name##_show(struct device *dev, \ \ return snprintf(buf, PAGE_SIZE, "%d\n", gadget->name); \ } \ -static DEVICE_ATTR(name, S_IRUSR, usb_udc_##name##_show, NULL) +static DEVICE_ATTR(name, S_IRUGO, usb_udc_##name##_show, NULL) static USB_UDC_ATTR(is_dualspeed); static USB_UDC_ATTR(is_otg); -- cgit v0.10.2 From d06785942de066992a3b6a570829097c23c327aa Mon Sep 17 00:00:00 2001 From: Mian Yousaf Kaukab Date: Tue, 1 Nov 2011 08:37:40 +0100 Subject: usb: musb: remove incorrectly added ARCH_U5500 define ARCH_U8500 covers both MACH_U8500 and MACH_U5500 Reported-by: Paul Bolle Signed-off-by: Mian Yousaf Kaukab Acked-by: Linus Walleij Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index fc34b8b..e118724 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -60,7 +60,7 @@ config USB_MUSB_BLACKFIN config USB_MUSB_UX500 tristate "U8500 and U5500" - depends on (ARCH_U8500 && AB8500_USB) || (ARCH_U5500) + depends on (ARCH_U8500 && AB8500_USB) endchoice diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 20a2873..c1fa12e 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1477,8 +1477,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb) /*-------------------------------------------------------------------------*/ #if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_SOC_OMAP3430) || \ - defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_U8500) || \ - defined(CONFIG_ARCH_U5500) + defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_U8500) static irqreturn_t generic_interrupt(int irq, void *__hci) { -- cgit v0.10.2 From 0de174b56ba70e5c0a26de9b5d2889260164d666 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Wed, 2 Nov 2011 12:17:59 +0200 Subject: usb: musb: hdrc: fix dependency on USB_GADGET_DUALSPEED in Kconfig USB_MUSB_HDRC depends on USB_GADGET_DUALSPEED. If HDRC is selected but DUALSPEED is not, the kernel oopses: [ 3.132781] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 3.141296] pgd = c0004000 [ 3.144134] [00000000] *pgd=00000000 [ 3.147918] Internal error: Oops: 5 [#1] SMP [ 3.152404] Modules linked in: [ 3.155609] CPU: 0 Not tainted (3.1.0-rc9-wl+ #417) [ 3.161132] PC is at composite_setup+0x738/0xbb4 [ 3.165985] LR is at vprintk+0x400/0x47c [ 3.170135] pc : [] lr : [] psr: 60000093 [ 3.170135] sp : c065dd50 ip : dfb1f0fc fp : c065ddbc [ 3.182220] r10: 00000000 r9 : df8fcae8 r8 : df8fcaa0 [ 3.187713] r7 : 00000000 r6 : df8eaa20 r5 : dfae8ea0 r4 : 00000000 [ 3.194580] r3 : df8fcae8 r2 : 00010002 r1 : c065dc40 r0 : 00000047 [ 3.201446] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 3.209228] Control: 10c53c7d Table: 8000404a DAC: 00000015 [ 3.215270] Process swapper (pid: 0, stack limit = 0xc065c2f8) [ 3.221405] Stack: (0xc065dd50 to 0xc065e000) [...] [ 3.415405] [] (composite_setup+0x738/0xbb4) from [] (musb_g_ep0_irq+0x9d0/0xaf8) [ 3.425109] [] (musb_g_ep0_irq+0x9d0/0xaf8) from [] (musb_interrupt+0xb48/0xc74) [ 3.434722] [] (musb_interrupt+0xb48/0xc74) from [] (generic_interrupt+0x68/0x80) [ 3.444458] [] (generic_interrupt+0x68/0x80) from [] (handle_irq_event_percpu+0x9c/0x234) [ 3.454925] [] (handle_irq_event_percpu+0x9c/0x234) from [] (handle_irq_event+0x4c/0x6c) [ 3.465270] [] (handle_irq_event+0x4c/0x6c) from [] (handle_fasteoi_irq+0xd8/0x110) [ 3.475158] [] (handle_fasteoi_irq+0xd8/0x110) from [] (generic_handle_irq+0x34/0x3c) [ 3.485260] [] (generic_handle_irq+0x34/0x3c) from [] (handle_IRQ+0x88/0xc8) [ 3.494537] [] (handle_IRQ+0x88/0xc8) from [] (asm_do_IRQ+0x18/0x1c) [ 3.503051] [] (asm_do_IRQ+0x18/0x1c) from [] (__irq_svc+0x38/0xc0) This patch changes Kconfig so that USB_GADGET_DUALSPEED is selected automatically by USB_MUSB_HDRC. Signed-off-by: Luciano Coelho Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index e118724..07a0346 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -11,6 +11,7 @@ config USB_MUSB_HDRC select TWL4030_USB if MACH_OMAP_3430SDP select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA select USB_OTG_UTILS + select USB_GADGET_DUALSPEED tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' help Say Y here if your system has a dual role high speed USB -- cgit v0.10.2 From b8cbbf803d5ad0971665dd502d784148464c6d1a Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 31 Oct 2011 16:01:29 +0900 Subject: usb: gadget: r8a66597-udc: fix for udc-newstyle The udc-newstyle needs device_register in probe() of platform_device. If it doesn't call, kernel panic happens in the sysfs_create_dir() when we run modprobe a gadget driver. [ balbi@ti.com : fix compile warning introduced by this patch ] Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c index 68a826a..38f9988 100644 --- a/drivers/usb/gadget/r8a66597-udc.c +++ b/drivers/usb/gadget/r8a66597-udc.c @@ -1742,7 +1742,6 @@ static int r8a66597_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver) { struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget); - int retval; if (!driver || driver->speed != USB_SPEED_HIGH @@ -1752,16 +1751,7 @@ static int r8a66597_start(struct usb_gadget *gadget, return -ENODEV; /* hook up the driver */ - driver->driver.bus = NULL; r8a66597->driver = driver; - r8a66597->gadget.dev.driver = &driver->driver; - - retval = device_add(&r8a66597->gadget.dev); - if (retval) { - dev_err(r8a66597_to_dev(r8a66597), "device_add error (%d)\n", - retval); - goto error; - } init_controller(r8a66597); r8a66597_bset(r8a66597, VBSE, INTENB0); @@ -1775,12 +1765,6 @@ static int r8a66597_start(struct usb_gadget *gadget, } return 0; - -error: - r8a66597->driver = NULL; - r8a66597->gadget.dev.driver = NULL; - - return retval; } static int r8a66597_stop(struct usb_gadget *gadget, @@ -1794,7 +1778,6 @@ static int r8a66597_stop(struct usb_gadget *gadget, disable_controller(r8a66597); spin_unlock_irqrestore(&r8a66597->lock, flags); - device_del(&r8a66597->gadget.dev); r8a66597->driver = NULL; return 0; } @@ -1845,6 +1828,7 @@ static int __exit r8a66597_remove(struct platform_device *pdev) clk_put(r8a66597->clk); } #endif + device_unregister(&r8a66597->gadget.dev); kfree(r8a66597); return 0; } @@ -1924,13 +1908,17 @@ static int __init r8a66597_probe(struct platform_device *pdev) r8a66597->irq_sense_low = irq_trigger == IRQF_TRIGGER_LOW; r8a66597->gadget.ops = &r8a66597_gadget_ops; - device_initialize(&r8a66597->gadget.dev); dev_set_name(&r8a66597->gadget.dev, "gadget"); r8a66597->gadget.is_dualspeed = 1; r8a66597->gadget.dev.parent = &pdev->dev; r8a66597->gadget.dev.dma_mask = pdev->dev.dma_mask; r8a66597->gadget.dev.release = pdev->dev.release; r8a66597->gadget.name = udc_name; + ret = device_register(&r8a66597->gadget.dev); + if (ret < 0) { + dev_err(&pdev->dev, "device_register failed\n"); + goto clean_up; + } init_timer(&r8a66597->timer); r8a66597->timer.function = r8a66597_timer; @@ -1945,7 +1933,7 @@ static int __init r8a66597_probe(struct platform_device *pdev) dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name); ret = PTR_ERR(r8a66597->clk); - goto clean_up; + goto clean_up_dev; } clk_enable(r8a66597->clk); } @@ -2014,7 +2002,9 @@ clean_up2: clk_disable(r8a66597->clk); clk_put(r8a66597->clk); } +clean_up_dev: #endif + device_unregister(&r8a66597->gadget.dev); clean_up: if (r8a66597) { if (r8a66597->sudmac_reg) -- cgit v0.10.2 From 05bb7013038a2b609aef14ad4e07afe031daec49 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 31 Oct 2011 16:01:33 +0900 Subject: usb: gadget: r8a66597-udc: fix flush fifo handling The "BCLR" in CFIFOCTR/DnFIFOCTR can flush the fifo of "CPU side" only. To flush the fifo of "SIE side", we have to use the "ACLRM" in PIPEnCTR. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c index 38f9988..24f84b2 100644 --- a/drivers/usb/gadget/r8a66597-udc.c +++ b/drivers/usb/gadget/r8a66597-udc.c @@ -1718,6 +1718,8 @@ static void r8a66597_fifo_flush(struct usb_ep *_ep) if (list_empty(&ep->queue) && !ep->busy) { pipe_stop(ep->r8a66597, ep->pipenum); r8a66597_bclr(ep->r8a66597, BCLR, ep->fifoctr); + r8a66597_write(ep->r8a66597, ACLRM, ep->pipectr); + r8a66597_write(ep->r8a66597, 0, ep->pipectr); } spin_unlock_irqrestore(&ep->r8a66597->lock, flags); } -- cgit v0.10.2 From 0e042be348b864a57a8a452aaa7ec49be5fb9e59 Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Fri, 4 Nov 2011 16:16:26 +0100 Subject: usb: gadget: fsl_udc_core: fix compile error. Fix compile error in file drivers/usb/gadget/fsl_udc_core.c. drivers/usb/gadget/fsl_udc_core.c: In function 'portscx_device_speed': drivers/usb/gadget/fsl_udc_core.c:1720: error: 'speed' undeclared (first use in this function) Introduced in commit e538dfdae85244fd2c4231725d82cc1f1bc4942c (usb: Provide usb_speed_string() function) Signed-off-by: Alexander Aring Acked-by: Michal Nazarewicz Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index b2c44e1..d786ba3 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -1717,7 +1717,7 @@ static void dtd_complete_irq(struct fsl_udc *udc) static inline enum usb_device_speed portscx_device_speed(u32 reg) { - switch (speed & PORTSCX_PORT_SPEED_MASK) { + switch (reg & PORTSCX_PORT_SPEED_MASK) { case PORTSCX_PORT_SPEED_HIGH: return USB_SPEED_HIGH; case PORTSCX_PORT_SPEED_FULL: -- cgit v0.10.2 From 7fccd480b7fe84a98ee252fa79dd92f7fff5ec2a Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 23 Oct 2011 22:55:54 -0700 Subject: usb: gadget: renesas_usbhs: fixup struct completion usage Since renesas_usbhs mod_host didn't use struct completion as static object, the warning of lockdep came out. This patch fixup this issue. Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c index 1a7208a..9b88868 100644 --- a/drivers/usb/renesas_usbhs/mod_host.c +++ b/drivers/usb/renesas_usbhs/mod_host.c @@ -103,7 +103,7 @@ struct usbhsh_hpriv { u32 port_stat; /* USB_PORT_STAT_xxx */ - struct completion *done; + struct completion setup_ack_done; /* see usbhsh_req_alloc/free */ struct list_head ureq_link_active; @@ -549,8 +549,7 @@ static void usbhsh_setup_stage_packet_push(struct usbhsh_hpriv *hpriv, * usbhsh_irq_setup_ack() * usbhsh_irq_setup_err() */ - DECLARE_COMPLETION(done); - hpriv->done = &done; + init_completion(&hpriv->setup_ack_done); /* copy original request */ memcpy(&req, urb->setup_packet, sizeof(struct usb_ctrlrequest)); @@ -572,8 +571,7 @@ static void usbhsh_setup_stage_packet_push(struct usbhsh_hpriv *hpriv, /* * wait setup packet ACK */ - wait_for_completion(&done); - hpriv->done = NULL; + wait_for_completion(&hpriv->setup_ack_done); dev_dbg(dev, "%s done\n", __func__); } @@ -1095,10 +1093,7 @@ static int usbhsh_irq_setup_ack(struct usbhs_priv *priv, dev_dbg(dev, "setup packet OK\n"); - if (unlikely(!hpriv->done)) - dev_err(dev, "setup ack happen without necessary data\n"); - else - complete(hpriv->done); /* see usbhsh_urb_enqueue() */ + complete(&hpriv->setup_ack_done); /* see usbhsh_urb_enqueue() */ return 0; } @@ -1111,10 +1106,7 @@ static int usbhsh_irq_setup_err(struct usbhs_priv *priv, dev_dbg(dev, "setup packet Err\n"); - if (unlikely(!hpriv->done)) - dev_err(dev, "setup err happen without necessary data\n"); - else - complete(hpriv->done); /* see usbhsh_urb_enqueue() */ + complete(&hpriv->setup_ack_done); /* see usbhsh_urb_enqueue() */ return 0; } @@ -1279,7 +1271,6 @@ int __devinit usbhs_mod_host_probe(struct usbhs_priv *priv) hpriv->mod.stop = usbhsh_stop; hpriv->pipe_info = pipe_info; hpriv->pipe_size = pipe_size; - hpriv->done = NULL; usbhsh_req_list_init(hpriv); usbhsh_port_stat_init(hpriv); -- cgit v0.10.2 From c9ae0c91b920a7ba91725d170aa023be8c12db7b Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 26 Oct 2011 01:21:07 -0700 Subject: usb: gadget: renesas_usbhs: fixup bogus conversion this patch fixup bogus conversion of 8a9775ab71218690ac34bed9e237e2b968857d3a (usb: gadget: renesas_usbhs: fix compile warning) Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index 8da685e..ffdf5d1 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -820,7 +820,7 @@ static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done) if (len % 4) /* 32bit alignment */ goto usbhsf_pio_prepare_push; - if ((*(u32 *) pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */ + if ((uintptr_t)(pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */ goto usbhsf_pio_prepare_push; /* get enable DMA fifo */ @@ -897,7 +897,7 @@ static int usbhsf_dma_try_pop(struct usbhs_pkt *pkt, int *is_done) if (!fifo) goto usbhsf_pio_prepare_pop; - if ((*(u32 *) pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */ + if ((uintptr_t)(pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */ goto usbhsf_pio_prepare_pop; ret = usbhsf_fifo_select(pipe, fifo, 0); -- cgit v0.10.2 From b7a8d17db9a86db1040862600cf3a02848f83844 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 26 Oct 2011 19:33:49 -0700 Subject: usb: gadget: renesas_usbhs: fixup section mismatch warning Fix up the following section mismatch warnings: WARNING: drivers/usb/renesas_usbhs/renesas_usbhs.o(.text+0xf5d): Section mismatch in reference from the function usbhs_mod_probe() to the function .devinit.text:usbhs_mod_host_probe() The function usbhs_mod_probe() references the function __devinit usbhs_mod_host_probe(). This is often because usbhs_mod_probe lacks a __devinit annotation or the annotation of usbhs_mod_host_probe is wrong. WARNING: drivers/usb/renesas_usbhs/renesas_usbhs.o(.text+0xfd7): Section mismatch in reference from the function usbhs_mod_probe() to the function .devexit.text:usbhs_mod_host_remove() The function usbhs_mod_probe() references a function in an exit section. Often the function usbhs_mod_host_remove() has valid usage outside the exit section and the fix is to remove the __devexit annotation of usbhs_mod_host_remove. WARNING: drivers/usb/renesas_usbhs/renesas_usbhs.o(.text+0x1005): Section mismatch in reference from the function usbhs_mod_remove() to the function .devexit.text:usbhs_mod_host_remove() The function usbhs_mod_remove() references a function in an exit section. Often the function usbhs_mod_host_remove() has valid usage outside the exit section and the fix is to remove the __devexit annotation of usbhs_mod_host_remove. Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index d2e2efa..08c679c 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -405,7 +405,7 @@ int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev) /* * platform functions */ -static int __devinit usbhs_probe(struct platform_device *pdev) +static int usbhs_probe(struct platform_device *pdev) { struct renesas_usbhs_platform_info *info = pdev->dev.platform_data; struct renesas_usbhs_driver_callback *dfunc; diff --git a/drivers/usb/renesas_usbhs/mod.h b/drivers/usb/renesas_usbhs/mod.h index 8ae3733..6c68755 100644 --- a/drivers/usb/renesas_usbhs/mod.h +++ b/drivers/usb/renesas_usbhs/mod.h @@ -143,8 +143,8 @@ void usbhs_irq_callback_update(struct usbhs_priv *priv, struct usbhs_mod *mod); */ #if defined(CONFIG_USB_RENESAS_USBHS_HCD) || \ defined(CONFIG_USB_RENESAS_USBHS_HCD_MODULE) -extern int __devinit usbhs_mod_host_probe(struct usbhs_priv *priv); -extern int __devexit usbhs_mod_host_remove(struct usbhs_priv *priv); +extern int usbhs_mod_host_probe(struct usbhs_priv *priv); +extern int usbhs_mod_host_remove(struct usbhs_priv *priv); #else static inline int usbhs_mod_host_probe(struct usbhs_priv *priv) { @@ -157,8 +157,8 @@ static inline void usbhs_mod_host_remove(struct usbhs_priv *priv) #if defined(CONFIG_USB_RENESAS_USBHS_UDC) || \ defined(CONFIG_USB_RENESAS_USBHS_UDC_MODULE) -extern int __devinit usbhs_mod_gadget_probe(struct usbhs_priv *priv); -extern void __devexit usbhs_mod_gadget_remove(struct usbhs_priv *priv); +extern int usbhs_mod_gadget_probe(struct usbhs_priv *priv); +extern void usbhs_mod_gadget_remove(struct usbhs_priv *priv); #else static inline int usbhs_mod_gadget_probe(struct usbhs_priv *priv) { diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index 4cc7ee0..d9717e0 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -830,7 +830,7 @@ static int usbhsg_stop(struct usbhs_priv *priv) return usbhsg_try_stop(priv, USBHSG_STATUS_STARTED); } -int __devinit usbhs_mod_gadget_probe(struct usbhs_priv *priv) +int usbhs_mod_gadget_probe(struct usbhs_priv *priv) { struct usbhsg_gpriv *gpriv; struct usbhsg_uep *uep; @@ -927,7 +927,7 @@ usbhs_mod_gadget_probe_err_gpriv: return ret; } -void __devexit usbhs_mod_gadget_remove(struct usbhs_priv *priv) +void usbhs_mod_gadget_remove(struct usbhs_priv *priv) { struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c index 9b88868..b964f25 100644 --- a/drivers/usb/renesas_usbhs/mod_host.c +++ b/drivers/usb/renesas_usbhs/mod_host.c @@ -1227,7 +1227,7 @@ static int usbhsh_stop(struct usbhs_priv *priv) return 0; } -int __devinit usbhs_mod_host_probe(struct usbhs_priv *priv) +int usbhs_mod_host_probe(struct usbhs_priv *priv) { struct usbhsh_hpriv *hpriv; struct usb_hcd *hcd; @@ -1290,7 +1290,7 @@ usbhs_mod_host_probe_err: return -ENOMEM; } -int __devexit usbhs_mod_host_remove(struct usbhs_priv *priv) +int usbhs_mod_host_remove(struct usbhs_priv *priv) { struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv); -- cgit v0.10.2 From db332bc9b26bbd79a37241721cccc9919489d5a9 Mon Sep 17 00:00:00 2001 From: Paul Zimmerman Date: Thu, 13 Oct 2011 17:46:36 -0700 Subject: usb: gadget: storage: check for valid USB_BULK_GET_MAX_LUN_REQUEST The latest USB-IF CV tester checks for a valid length for this request. Signed-off-by: Paul Zimmerman Acked-by: Alan Stern Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index 52583a2..dfd0044 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -639,7 +639,8 @@ static int fsg_setup(struct usb_function *f, if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) break; - if (w_index != fsg->interface_number || w_value != 0) + if (w_index != fsg->interface_number || w_value != 0 || + w_length != 1) return -EDOM; VDBG(fsg, "get max LUN\n"); *(u8 *)req->buf = fsg->common->nluns - 1; diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index f7e39b0..4314cf2 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -875,7 +875,7 @@ static int class_setup_req(struct fsg_dev *fsg, if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) break; - if (w_index != 0 || w_value != 0) { + if (w_index != 0 || w_value != 0 || w_length != 1) { value = -EDOM; break; } -- cgit v0.10.2 From ce7b6121851c72d661134d113a78161095e0ae73 Mon Sep 17 00:00:00 2001 From: Paul Zimmerman Date: Wed, 26 Oct 2011 12:07:54 -0700 Subject: usb: gadget: storage: check for valid USB_BULK_RESET_REQUEST wLength The USB-IF CV compliance tester is getting stricter, and it would be valid for it to fail a mass-storage device that accepts an invalid USB_BULK_RESET_REQUEST request. Although it doesn't do that yet, let's be proactive and fix that now. Suggested by Alan Stern. Signed-off-by: Paul Zimmerman Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index dfd0044..c39d588 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -624,7 +624,8 @@ static int fsg_setup(struct usb_function *f, if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) break; - if (w_index != fsg->interface_number || w_value != 0) + if (w_index != fsg->interface_number || w_value != 0 || + w_length != 0) return -EDOM; /* diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index 4314cf2..11b5196 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -859,7 +859,7 @@ static int class_setup_req(struct fsg_dev *fsg, if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) break; - if (w_index != 0 || w_value != 0) { + if (w_index != 0 || w_value != 0 || w_length != 0) { value = -EDOM; break; } -- cgit v0.10.2 From 74203de067ae5c71526168b597088022836e31d3 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Sat, 15 Oct 2011 13:45:05 +0200 Subject: usb: gadget: fix MIDI gadget jack allocation The dynamic jack allocation of the MIDI gadget currently links all external jacks to one single instance of an embedded jack. According to the spec, this is only valid if these streams always carry the same data stream, as described in the USB MIDI 1.0 spec, chapter 3.3.1. Also, genius Windows 7(tm) terminates it's life cycle instantly with a blue screen of death once a device with more than one input and output port with the current implementation is connected. While at it, and because it grew again by this change, allocate the temporary function pointer list on the heap, not on the stack. Signed-off-by: Daniel Mack Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/f_midi.c b/drivers/usb/gadget/f_midi.c index 67b2229..3797b3d 100644 --- a/drivers/usb/gadget/f_midi.c +++ b/drivers/usb/gadget/f_midi.c @@ -95,7 +95,6 @@ static void f_midi_transmit(struct f_midi *midi, struct usb_request *req); DECLARE_UAC_AC_HEADER_DESCRIPTOR(1); DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(1); -DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(16); DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(16); /* B.3.1 Standard AC Interface Descriptor */ @@ -140,26 +139,6 @@ static struct usb_ms_header_descriptor ms_header_desc __initdata = { /* .wTotalLength = DYNAMIC */ }; -/* B.4.3 Embedded MIDI IN Jack Descriptor */ -static struct usb_midi_in_jack_descriptor jack_in_emb_desc = { - .bLength = USB_DT_MIDI_IN_SIZE, - .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubtype = USB_MS_MIDI_IN_JACK, - .bJackType = USB_MS_EMBEDDED, - /* .bJackID = DYNAMIC */ -}; - -/* B.4.4 Embedded MIDI OUT Jack Descriptor */ -static struct usb_midi_out_jack_descriptor_16 jack_out_emb_desc = { - /* .bLength = DYNAMIC */ - .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubtype = USB_MS_MIDI_OUT_JACK, - .bJackType = USB_MS_EMBEDDED, - /* .bJackID = DYNAMIC */ - /* .bNrInputPins = DYNAMIC */ - /* .pins = DYNAMIC */ -}; - /* B.5.1 Standard Bulk OUT Endpoint Descriptor */ static struct usb_endpoint_descriptor bulk_out_desc = { .bLength = USB_DT_ENDPOINT_AUDIO_SIZE, @@ -758,9 +737,11 @@ fail: static int __init f_midi_bind(struct usb_configuration *c, struct usb_function *f) { - struct usb_descriptor_header *midi_function[(MAX_PORTS * 2) + 12]; + struct usb_descriptor_header **midi_function; struct usb_midi_in_jack_descriptor jack_in_ext_desc[MAX_PORTS]; + struct usb_midi_in_jack_descriptor jack_in_emb_desc[MAX_PORTS]; struct usb_midi_out_jack_descriptor_1 jack_out_ext_desc[MAX_PORTS]; + struct usb_midi_out_jack_descriptor_1 jack_out_emb_desc[MAX_PORTS]; struct usb_composite_dev *cdev = c->cdev; struct f_midi *midi = func_to_midi(f); int status, n, jack = 1, i = 0; @@ -798,6 +779,14 @@ f_midi_bind(struct usb_configuration *c, struct usb_function *f) goto fail; midi->out_ep->driver_data = cdev; /* claim */ + /* allocate temporary function list */ + midi_function = kcalloc((MAX_PORTS * 4) + 9, sizeof(midi_function), + GFP_KERNEL); + if (!midi_function) { + status = -ENOMEM; + goto fail; + } + /* * construct the function's descriptor set. As the number of * input and output MIDI ports is configurable, we have to do @@ -811,73 +800,74 @@ f_midi_bind(struct usb_configuration *c, struct usb_function *f) /* calculate the header's wTotalLength */ n = USB_DT_MS_HEADER_SIZE - + (1 + midi->in_ports) * USB_DT_MIDI_IN_SIZE - + (1 + midi->out_ports) * USB_DT_MIDI_OUT_SIZE(1); + + (midi->in_ports + midi->out_ports) * + (USB_DT_MIDI_IN_SIZE + USB_DT_MIDI_OUT_SIZE(1)); ms_header_desc.wTotalLength = cpu_to_le16(n); midi_function[i++] = (struct usb_descriptor_header *) &ms_header_desc; - /* we have one embedded IN jack */ - jack_in_emb_desc.bJackID = jack++; - midi_function[i++] = (struct usb_descriptor_header *) &jack_in_emb_desc; - - /* and a dynamic amount of external IN jacks */ - for (n = 0; n < midi->in_ports; n++) { - struct usb_midi_in_jack_descriptor *ext = &jack_in_ext_desc[n]; - - ext->bLength = USB_DT_MIDI_IN_SIZE; - ext->bDescriptorType = USB_DT_CS_INTERFACE; - ext->bDescriptorSubtype = USB_MS_MIDI_IN_JACK; - ext->bJackType = USB_MS_EXTERNAL; - ext->bJackID = jack++; - ext->iJack = 0; - - midi_function[i++] = (struct usb_descriptor_header *) ext; - } - - /* one embedded OUT jack ... */ - jack_out_emb_desc.bLength = USB_DT_MIDI_OUT_SIZE(midi->in_ports); - jack_out_emb_desc.bJackID = jack++; - jack_out_emb_desc.bNrInputPins = midi->in_ports; - /* ... which referencess all external IN jacks */ + /* configure the external IN jacks, each linked to an embedded OUT jack */ for (n = 0; n < midi->in_ports; n++) { - jack_out_emb_desc.pins[n].baSourceID = jack_in_ext_desc[n].bJackID; - jack_out_emb_desc.pins[n].baSourcePin = 1; + struct usb_midi_in_jack_descriptor *in_ext = &jack_in_ext_desc[n]; + struct usb_midi_out_jack_descriptor_1 *out_emb = &jack_out_emb_desc[n]; + + in_ext->bLength = USB_DT_MIDI_IN_SIZE; + in_ext->bDescriptorType = USB_DT_CS_INTERFACE; + in_ext->bDescriptorSubtype = USB_MS_MIDI_IN_JACK; + in_ext->bJackType = USB_MS_EXTERNAL; + in_ext->bJackID = jack++; + in_ext->iJack = 0; + midi_function[i++] = (struct usb_descriptor_header *) in_ext; + + out_emb->bLength = USB_DT_MIDI_OUT_SIZE(1); + out_emb->bDescriptorType = USB_DT_CS_INTERFACE; + out_emb->bDescriptorSubtype = USB_MS_MIDI_OUT_JACK; + out_emb->bJackType = USB_MS_EMBEDDED; + out_emb->bJackID = jack++; + out_emb->bNrInputPins = 1; + out_emb->pins[0].baSourcePin = 1; + out_emb->pins[0].baSourceID = in_ext->bJackID; + out_emb->iJack = 0; + midi_function[i++] = (struct usb_descriptor_header *) out_emb; + + /* link it to the endpoint */ + ms_in_desc.baAssocJackID[n] = out_emb->bJackID; } - midi_function[i++] = (struct usb_descriptor_header *) &jack_out_emb_desc; - - /* and multiple external OUT jacks ... */ + /* configure the external OUT jacks, each linked to an embedded IN jack */ for (n = 0; n < midi->out_ports; n++) { - struct usb_midi_out_jack_descriptor_1 *ext = &jack_out_ext_desc[n]; - int m; - - ext->bLength = USB_DT_MIDI_OUT_SIZE(1); - ext->bDescriptorType = USB_DT_CS_INTERFACE; - ext->bDescriptorSubtype = USB_MS_MIDI_OUT_JACK; - ext->bJackType = USB_MS_EXTERNAL; - ext->bJackID = jack++; - ext->bNrInputPins = 1; - ext->iJack = 0; - /* ... which all reference the same embedded IN jack */ - for (m = 0; m < midi->out_ports; m++) { - ext->pins[m].baSourceID = jack_in_emb_desc.bJackID; - ext->pins[m].baSourcePin = 1; - } - - midi_function[i++] = (struct usb_descriptor_header *) ext; + struct usb_midi_in_jack_descriptor *in_emb = &jack_in_emb_desc[n]; + struct usb_midi_out_jack_descriptor_1 *out_ext = &jack_out_ext_desc[n]; + + in_emb->bLength = USB_DT_MIDI_IN_SIZE; + in_emb->bDescriptorType = USB_DT_CS_INTERFACE; + in_emb->bDescriptorSubtype = USB_MS_MIDI_IN_JACK; + in_emb->bJackType = USB_MS_EMBEDDED; + in_emb->bJackID = jack++; + in_emb->iJack = 0; + midi_function[i++] = (struct usb_descriptor_header *) in_emb; + + out_ext->bLength = USB_DT_MIDI_OUT_SIZE(1); + out_ext->bDescriptorType = USB_DT_CS_INTERFACE; + out_ext->bDescriptorSubtype = USB_MS_MIDI_OUT_JACK; + out_ext->bJackType = USB_MS_EXTERNAL; + out_ext->bJackID = jack++; + out_ext->bNrInputPins = 1; + out_ext->iJack = 0; + out_ext->pins[0].baSourceID = in_emb->bJackID; + out_ext->pins[0].baSourcePin = 1; + midi_function[i++] = (struct usb_descriptor_header *) out_ext; + + /* link it to the endpoint */ + ms_out_desc.baAssocJackID[n] = in_emb->bJackID; } /* configure the endpoint descriptors ... */ ms_out_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->in_ports); ms_out_desc.bNumEmbMIDIJack = midi->in_ports; - for (n = 0; n < midi->in_ports; n++) - ms_out_desc.baAssocJackID[n] = jack_in_emb_desc.bJackID; ms_in_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->out_ports); ms_in_desc.bNumEmbMIDIJack = midi->out_ports; - for (n = 0; n < midi->out_ports; n++) - ms_in_desc.baAssocJackID[n] = jack_out_emb_desc.bJackID; /* ... and add them to the list */ midi_function[i++] = (struct usb_descriptor_header *) &bulk_out_desc; @@ -901,6 +891,8 @@ f_midi_bind(struct usb_configuration *c, struct usb_function *f) f->descriptors = usb_copy_descriptors(midi_function); } + kfree(midi_function); + return 0; fail: -- cgit v0.10.2 From 001428e4871d6c62f5e16c62df681624d8b480c1 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Mon, 10 Oct 2011 18:38:05 +0200 Subject: USB: gadgetfs: gadgetfs_disconnect: fix inconsistent lock state Under certain circumstances lockdep finds an inconsistent lock state in gadgetfs. The problem can be reproduced with a hardware using the ci13xxx_udc driver and the gadgetfs test program (needs a patch to support the ci13xxx_udc, though): http://www.linux-usb.org/gadget/usb.c Start the test program, wait to initialize, then press Ctrl+c. This patch fixes the following problem by using spin_lock_irqsave() instead of spin_lock(). ================================= [ INFO: inconsistent lock state ] 3.1.0-rc6+ #158 --------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. usb/113 [HC0[0]:SC0[0]:HE1:SE1] takes: (&(&dev->lock)->rlock){?.....}, at: [] gadgetfs_disconnect+0x14/0x80 [gadgetfs] {IN-HARDIRQ-W} state was registered at: [] mark_irqflags+0x14c/0x1ac [] __lock_acquire+0x4e0/0x8f0 [] lock_acquire+0x98/0x1a8 [] _raw_spin_lock+0x54/0x8c [] gadgetfs_disconnect+0x14/0x80 [gadgetfs] [] _gadget_stop_activity+0xd4/0x154 [] isr_reset_handler+0x34/0x1c0 [] udc_irq+0x204/0x228 [] handle_irq_event_percpu+0x64/0x3a0 [] handle_irq_event+0x3c/0x5c [] handle_level_irq+0x8c/0x10c [] generic_handle_irq+0x30/0x44 [] handle_IRQ+0x30/0x84 [] __irq_svc+0x38/0x60 [] default_idle+0x30/0x34 [] cpu_idle+0x9c/0xd8 [] start_kernel+0x278/0x2bc irq event stamp: 6412 hardirqs last enabled at (6412): [] _raw_spin_unlock_irqrestore+0x30/0x5c hardirqs last disabled at (6411): [] _raw_spin_lock_irqsave+0x20/0xa0 softirqs last enabled at (6381): [] irq_exit+0xa0/0xa8 softirqs last disabled at (6372): [] irq_exit+0xa0/0xa8 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&dev->lock)->rlock); lock(&(&dev->lock)->rlock); *** DEADLOCK *** 1 lock held by usb/113: #0: (udc_lock#2){+.+.+.}, at: [] usb_gadget_unregister_driver+0x34/0x88 stack backtrace: [] (unwind_backtrace+0x0/0xf0) from [] (print_usage_bug+0x144/0x1c4) [] (print_usage_bug+0x144/0x1c4) from [] (mark_lock_irq+0x22c/0x274) [] (mark_lock_irq+0x22c/0x274) from [] (mark_lock+0x148/0x3e0) [] (mark_lock+0x148/0x3e0) from [] (mark_irqflags+0xfc/0x1ac) [] (mark_irqflags+0xfc/0x1ac) from [] (__lock_acquire+0x4e0/0x8f0) [] (__lock_acquire+0x4e0/0x8f0) from [] (lock_acquire+0x98/0x1a8) [] (lock_acquire+0x98/0x1a8) from [] (_raw_spin_lock+0x54/0x8c) [] (_raw_spin_lock+0x54/0x8c) from [] (gadgetfs_disconnect+0x14/0x80 [gadgetfs]) [] (gadgetfs_disconnect+0x14/0x80 [gadgetfs]) from [] (_gadget_stop_activity+0xd4/0x154) [] (_gadget_stop_activity+0xd4/0x154) from [] (ci13xxx_stop+0xbc/0x17c) [] (ci13xxx_stop+0xbc/0x17c) from [] (usb_gadget_remove_driver+0x88/0x98) [] (usb_gadget_remove_driver+0x88/0x98) from [] (usb_gadget_unregister_driver+0x68/0x88) [] (usb_gadget_unregister_driver+0x68/0x88) from [] (dev_release+0x14/0x48 [gadgetfs]) [] (dev_release+0x14/0x48 [gadgetfs]) from [] (__fput+0xa4/0x1f0) [] (__fput+0xa4/0x1f0) from [] (filp_close+0x5c/0x74) [] (filp_close+0x5c/0x74) from [] (sys_close+0xa8/0x150) [] (sys_close+0xa8/0x150) from [] (ret_fast_syscall+0x0/0x38) Tested-by: Pavankumar Kondeti Signed-off-by: Marc Kleine-Budde Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index a392ec0..6ccae27 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -1730,8 +1730,9 @@ static void gadgetfs_disconnect (struct usb_gadget *gadget) { struct dev_data *dev = get_gadget_data (gadget); + unsigned long flags; - spin_lock (&dev->lock); + spin_lock_irqsave (&dev->lock, flags); if (dev->state == STATE_DEV_UNCONNECTED) goto exit; dev->state = STATE_DEV_UNCONNECTED; @@ -1740,7 +1741,7 @@ gadgetfs_disconnect (struct usb_gadget *gadget) next_event (dev, GADGETFS_DISCONNECT); ep0_readable (dev); exit: - spin_unlock (&dev->lock); + spin_unlock_irqrestore (&dev->lock, flags); } static void -- cgit v0.10.2 From 954aad8cd18c928e2db5229f6fa71c80d1c3d8b5 Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Mon, 10 Oct 2011 18:38:06 +0200 Subject: USB: ci13xxx_udc: fix logic to mark request dma addresses as invalid The current driver sets the request's dma addr (mReq->req.dma) to 0 to mark the DMA address as not valid. However some gadget drivers (e.g. gadgetfs) set the request's dma addr to DMA_ADDR_INVALID to mark the address as invalid. This leads to bogus data send because the ci13xxx_udc driver assumes the request has already been mapped. This patch fixes the problem, by using DMA_ADDR_INVALID instead of 0 to mark the request's DMA address as invalid. Tested-by: Pavankumar Kondeti Signed-off-by: Michael Grzeschik Signed-off-by: Marc Kleine-Budde Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index 83428f5..ae6c001 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -71,6 +71,9 @@ /****************************************************************************** * DEFINE *****************************************************************************/ + +#define DMA_ADDR_INVALID (~(dma_addr_t)0) + /* ctrl register bank access */ static DEFINE_SPINLOCK(udc_lock); @@ -1434,7 +1437,7 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) return -EALREADY; mReq->req.status = -EALREADY; - if (length && !mReq->req.dma) { + if (length && mReq->req.dma == DMA_ADDR_INVALID) { mReq->req.dma = \ dma_map_single(mEp->device, mReq->req.buf, length, mEp->dir ? DMA_TO_DEVICE : @@ -1453,7 +1456,7 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) dma_unmap_single(mEp->device, mReq->req.dma, length, mEp->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - mReq->req.dma = 0; + mReq->req.dma = DMA_ADDR_INVALID; mReq->map = 0; } return -ENOMEM; @@ -1549,7 +1552,7 @@ static int _hardware_dequeue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) if (mReq->map) { dma_unmap_single(mEp->device, mReq->req.dma, mReq->req.length, mEp->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - mReq->req.dma = 0; + mReq->req.dma = DMA_ADDR_INVALID; mReq->map = 0; } @@ -2189,6 +2192,7 @@ static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags) mReq = kzalloc(sizeof(struct ci13xxx_req), gfp_flags); if (mReq != NULL) { INIT_LIST_HEAD(&mReq->queue); + mReq->req.dma = DMA_ADDR_INVALID; mReq->ptr = dma_pool_alloc(mEp->td_pool, gfp_flags, &mReq->dma); @@ -2328,7 +2332,7 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req) if (mReq->map) { dma_unmap_single(mEp->device, mReq->req.dma, mReq->req.length, mEp->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - mReq->req.dma = 0; + mReq->req.dma = DMA_ADDR_INVALID; mReq->map = 0; } req->status = -ECONNRESET; -- cgit v0.10.2 From fd537c041b7f2cbceb5a21c37946e017006edd1c Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Mon, 10 Oct 2011 18:38:07 +0200 Subject: USB: ci13xxx_udc: fix deadlock during rmmod The inline documentation of _gadget_stop_activity() states that the function should be called holding the udc->lock. This however will result in a deadlock, because _gadget_stop_activity() takes the udc->lock. During normal operation _gadget_stop_activity() is always called unlocked, but in ci13xxx_stop() it's called locked, this results in the following deadlock during rmmod of a gadget driver. This patch fixes the deadlock by calling _gadget_stop_activity() always unlocked, the inline documentation is adjusted accordingly. ============================================= [ INFO: possible recursive locking detected ] 3.1.0-rc6+ #159 --------------------------------------------- rmmod/121 is trying to acquire lock: (udc_lock){-.-...}, at: [] _gadget_stop_activity+0x18/0x154 but task is already holding lock: (udc_lock){-.-...}, at: [] ci13xxx_stop+0x5c/0x164 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(udc_lock); lock(udc_lock); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by rmmod/121: #0: (udc_lock#2){+.+.+.}, at: [] usb_gadget_unregister_driver+0x34/0x88 #1: (udc_lock){-.-...}, at: [] ci13xxx_stop+0x5c/0x164 stack backtrace: [] (unwind_backtrace+0x0/0xf0) from [] (check_deadlock.clone.24+0x284/0x2c4) [] (check_deadlock.clone.24+0x284/0x2c4) from [] (validate_chain.clone.25+0x430/0x6fc) [] (validate_chain.clone.25+0x430/0x6fc) from [] (__lock_acquire+0x494/0x8f0) [] (__lock_acquire+0x494/0x8f0) from [] (lock_acquire+0x98/0x1a8) [] (lock_acquire+0x98/0x1a8) from [] (_raw_spin_lock_irqsave+0x64/0xa0) [] (_raw_spin_lock_irqsave+0x64/0xa0) from [] (_gadget_stop_activity+0x18/0x154) [] (_gadget_stop_activity+0x18/0x154) from [] (ci13xxx_stop+0xb0/0x164) [] (ci13xxx_stop+0xb0/0x164) from [] (usb_gadget_remove_driver+0x88/0x98) [] (usb_gadget_remove_driver+0x88/0x98) from [] (usb_gadget_unregister_driver+0x68/0x88) [] (usb_gadget_unregister_driver+0x68/0x88) from [] (sys_delete_module+0x1fc/0x26c) [] (sys_delete_module+0x1fc/0x26c) from [] (ret_fast_syscall+0x0/0x38) BUG: spinlock lockup on CPU#0, rmmod/121, c05b1644 [] (unwind_backtrace+0x0/0xf0) from [] (do_raw_spin_lock+0x128/0x144) [] (do_raw_spin_lock+0x128/0x144) from [] (_raw_spin_lock_irqsave+0x88/0xa0) [] (_raw_spin_lock_irqsave+0x88/0xa0) from [] (_gadget_stop_activity+0x18/0x154) [] (_gadget_stop_activity+0x18/0x154) from [] (ci13xxx_stop+0xb0/0x164) [] (ci13xxx_stop+0xb0/0x164) from [] (usb_gadget_remove_driver+0x88/0x98) [] (usb_gadget_remove_driver+0x88/0x98) from [] (usb_gadget_unregister_driver+0x68/0x88) [] (usb_gadget_unregister_driver+0x68/0x88) from [] (sys_delete_module+0x1fc/0x26c) [] (sys_delete_module+0x1fc/0x26c) from [] (ret_fast_syscall+0x0/0x38) Tested-by: Pavankumar Kondeti Signed-off-by: Marc Kleine-Budde Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index ae6c001..4241241 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -1613,7 +1613,6 @@ __acquires(mEp->lock) * @gadget: gadget * * This function returns an error code - * Caller must hold lock */ static int _gadget_stop_activity(struct usb_gadget *gadget) { @@ -2707,7 +2706,9 @@ static int ci13xxx_stop(struct usb_gadget_driver *driver) if (udc->udc_driver->notify_event) udc->udc_driver->notify_event(udc, CI13XXX_CONTROLLER_STOPPED_EVENT); + spin_unlock_irqrestore(udc->lock, flags); _gadget_stop_activity(&udc->gadget); + spin_lock_irqsave(udc->lock, flags); pm_runtime_put(&udc->gadget.dev); } -- cgit v0.10.2 From 194fa47ef629df07d87064ca4aa973939fa6fb4d Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Mon, 10 Oct 2011 18:38:08 +0200 Subject: USB: ci13xxx_udc: fix debug trace code This patch fixes the following compile errors that show up if switching on the debug trace code: drivers/usb/gadget/ci13xxx_udc.c: In function 'ci13xxx_wakeup': drivers/usb/gadget/ci13xxx_udc.c:2517:3: error: 'dev' undeclared (first use in this function) drivers/usb/gadget/ci13xxx_udc.c:2517:3: note: each undeclared identifier is reported only once for each function it appears in drivers/usb/gadget/ci13xxx_udc.c: In function 'udc_probe': drivers/usb/gadget/ci13xxx_udc.c:2867:2: error: 'name' undeclared (first use in this function) Tested-by: Pavankumar Kondeti Signed-off-by: Marc Kleine-Budde Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index 4241241..9a0c397 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -2503,12 +2503,12 @@ static int ci13xxx_wakeup(struct usb_gadget *_gadget) spin_lock_irqsave(udc->lock, flags); if (!udc->remote_wakeup) { ret = -EOPNOTSUPP; - dbg_trace("remote wakeup feature is not enabled\n"); + trace("remote wakeup feature is not enabled\n"); goto out; } if (!hw_cread(CAP_PORTSC, PORTSC_SUSP)) { ret = -EINVAL; - dbg_trace("port is not suspended\n"); + trace("port is not suspended\n"); goto out; } hw_cwrite(CAP_PORTSC, PORTSC_FPR, PORTSC_FPR); @@ -2855,7 +2855,7 @@ static int udc_probe(struct ci13xxx_udc_driver *driver, struct device *dev, struct ci13xxx *udc; int retval = 0; - trace("%p, %p, %p", dev, regs, name); + trace("%p, %p, %p", dev, regs, driver->name); if (dev == NULL || regs == NULL || driver == NULL || driver->name == NULL) -- cgit v0.10.2 From 4703d2e9d06cd1e5add773aa6cc5587e6664bf78 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Mon, 10 Oct 2011 18:38:11 +0200 Subject: USB: ci13xxx_msm: add module license Since commit "193ab2a usb: gadget: allow multiple gadgets to be built" the udc controllers can be compiled as a module. The ci13xxx_msm driver is missing the MODULE_LICENSE statement, so loading fails with: ci13xxx_msm: module license 'unspecified' taints kernel. ci13xxx_msm: Unknown symbol dev_set_name (err 0) ci13xxx_msm: Unknown symbol platform_get_irq (err 0) ci13xxx_msm: Unknown symbol device_unregister (err 0) ci13xxx_msm: Unknown symbol usb_add_gadget_udc (err 0) ci13xxx_msm: Unknown symbol put_device (err 0) ci13xxx_msm: Unknown symbol platform_driver_register (err 0) ci13xxx_msm: Unknown symbol platform_get_resource (err 0) ci13xxx_msm: Unknown symbol device_register (err 0) ci13xxx_msm: Unknown symbol usb_del_gadget_udc (err 0) This patch adds the missing MODULE_LICENSE statement with GPL v2 according to the header of the driver. Tested-by: Pavankumar Kondeti Signed-off-by: Marc Kleine-Budde Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/ci13xxx_msm.c b/drivers/usb/gadget/ci13xxx_msm.c index 4eedfe5..1fc6129 100644 --- a/drivers/usb/gadget/ci13xxx_msm.c +++ b/drivers/usb/gadget/ci13xxx_msm.c @@ -122,3 +122,5 @@ static int __init ci13xxx_msm_init(void) return platform_driver_register(&ci13xxx_msm_driver); } module_init(ci13xxx_msm_init); + +MODULE_LICENSE("GPL v2"); -- cgit v0.10.2 From 73ef635a07c0e6a0a159d8beabffb83399429188 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 24 Oct 2011 02:24:49 -0700 Subject: usb: gadget: renesas_usbhs: bugfix: care pipe direction renesas_usbhs is caring pipe type and its direction. but current usbhs_endpoint_alloc() didn't check direction. this patch modify it. Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c index b964f25..f8f612c 100644 --- a/drivers/usb/renesas_usbhs/mod_host.c +++ b/drivers/usb/renesas_usbhs/mod_host.c @@ -355,6 +355,7 @@ static void usbhsh_device_free(struct usbhsh_hpriv *hpriv, struct usbhsh_ep *usbhsh_endpoint_alloc(struct usbhsh_hpriv *hpriv, struct usbhsh_device *udev, struct usb_host_endpoint *ep, + int dir_in_req, gfp_t mem_flags) { struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); @@ -364,27 +365,38 @@ struct usbhsh_ep *usbhsh_endpoint_alloc(struct usbhsh_hpriv *hpriv, struct usbhs_pipe *pipe, *best_pipe; struct device *dev = usbhsh_hcd_to_dev(hcd); struct usb_endpoint_descriptor *desc = &ep->desc; - int type, i; + int type, i, dir_in; unsigned int min_usr; + dir_in_req = !!dir_in_req; + uep = kzalloc(sizeof(struct usbhsh_ep), mem_flags); if (!uep) { dev_err(dev, "usbhsh_ep alloc fail\n"); return NULL; } - type = usb_endpoint_type(desc); + + if (usb_endpoint_xfer_control(desc)) { + best_pipe = usbhsh_hpriv_to_dcp(hpriv); + goto usbhsh_endpoint_alloc_find_pipe; + } /* * find best pipe for endpoint * see * HARDWARE LIMITATION */ + type = usb_endpoint_type(desc); min_usr = ~0; best_pipe = NULL; - usbhs_for_each_pipe_with_dcp(pipe, priv, i) { + usbhs_for_each_pipe(pipe, priv, i) { if (!usbhs_pipe_type_is(pipe, type)) continue; + dir_in = !!usbhs_pipe_is_dir_in(pipe); + if (0 != (dir_in - dir_in_req)) + continue; + info = usbhsh_pipe_info(pipe); if (min_usr > info->usr_cnt) { @@ -398,7 +410,7 @@ struct usbhsh_ep *usbhsh_endpoint_alloc(struct usbhsh_hpriv *hpriv, kfree(uep); return NULL; } - +usbhsh_endpoint_alloc_find_pipe: /* * init uep */ @@ -430,7 +442,7 @@ struct usbhsh_ep *usbhsh_endpoint_alloc(struct usbhsh_hpriv *hpriv, dev_dbg(dev, "%s [%d-%s](%p)\n", __func__, usbhsh_device_number(hpriv, udev), - usbhs_pipe_name(pipe), uep); + usbhs_pipe_name(uep->pipe), uep); return uep; } @@ -722,11 +734,11 @@ static int usbhsh_urb_enqueue(struct usb_hcd *hcd, struct usbhsh_device *udev, *new_udev = NULL; struct usbhs_pipe *pipe; struct usbhsh_ep *uep; + int is_dir_in = usb_pipein(urb->pipe); int ret; - dev_dbg(dev, "%s (%s)\n", - __func__, usb_pipein(urb->pipe) ? "in" : "out"); + dev_dbg(dev, "%s (%s)\n", __func__, is_dir_in ? "in" : "out"); ret = usb_hcd_link_urb_to_ep(hcd, urb); if (ret) @@ -749,7 +761,8 @@ static int usbhsh_urb_enqueue(struct usb_hcd *hcd, */ uep = usbhsh_ep_to_uep(ep); if (!uep) { - uep = usbhsh_endpoint_alloc(hpriv, udev, ep, mem_flags); + uep = usbhsh_endpoint_alloc(hpriv, udev, ep, + is_dir_in, mem_flags); if (!uep) goto usbhsh_urb_enqueue_error_free_device; } -- cgit v0.10.2 From 146ee50ae51c78fc93d025cb9528883df26ab705 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 24 Oct 2011 02:25:07 -0700 Subject: usb: gadget: renesas_usbhs: bugfix: disable irq when device stop Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c index f8f612c..228f7b8 100644 --- a/drivers/usb/renesas_usbhs/mod_host.c +++ b/drivers/usb/renesas_usbhs/mod_host.c @@ -1226,8 +1226,18 @@ static int usbhsh_stop(struct usbhs_priv *priv) { struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv); + struct usbhs_mod *mod = usbhs_mod_get_current(priv); struct device *dev = usbhs_priv_to_dev(priv); + /* + * disable irq callback + */ + mod->irq_attch = NULL; + mod->irq_dtch = NULL; + mod->irq_sack = NULL; + mod->irq_sign = NULL; + usbhs_irq_callback_update(priv, mod); + usb_remove_hcd(hcd); /* disable sys */ -- cgit v0.10.2 From d7a00ec1a8debf74317c5110ded9918bad8de772 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 24 Oct 2011 02:25:28 -0700 Subject: usb: gadget: renesas_usbhs: bugfix: set DATA0 when usbhsh_endpoint_alloc() new endpoint should start from DATA0, but mod_host didn't care it. This patch fix it. Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c index 228f7b8..bade761 100644 --- a/drivers/usb/renesas_usbhs/mod_host.c +++ b/drivers/usb/renesas_usbhs/mod_host.c @@ -435,6 +435,7 @@ usbhsh_endpoint_alloc_find_pipe: * see * DCPMAXP/PIPEMAXP */ + usbhs_pipe_sequence_data0(uep->pipe); usbhs_pipe_config_update(uep->pipe, usbhsh_device_number(hpriv, udev), usb_endpoint_num(desc), -- cgit v0.10.2 From 12d36c16bde3ee0643d705caa87723de536dbe49 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Thu, 3 Nov 2011 20:27:50 +0100 Subject: usb: dwc3: gadget: initialize max_streams Without this the gadget will never be able to allocate a stream capable endpoint. The manual says that the stream id is a 16bit id. It does not talk about an upper limit in any other way. So I think 15 is a reasonable limit :) Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index fa824cf..25dbd86 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1284,6 +1284,7 @@ static int __devinit dwc3_gadget_init_endpoints(struct dwc3 *dwc) int ret; dep->endpoint.maxpacket = 1024; + dep->endpoint.max_streams = 15; dep->endpoint.ops = &dwc3_gadget_ep_ops; list_add_tail(&dep->endpoint.ep_list, &dwc->gadget.ep_list); -- cgit v0.10.2 From ab570da26eec4e840dc1d18f45ab9d64bae49a5d Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 10 Nov 2011 09:58:04 +0200 Subject: usb: musb: fix compilation breakage introduced by de47725 commit de47725 (include: replace linux/module.h with "struct module" wherever possible) introduced a compilation breaked when it removed from which musb glue layers were (mistakenly) relying on. Include that header to fix the compile error. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c index 08f1d0b6..e233d2b 100644 --- a/drivers/usb/musb/am35x.c +++ b/drivers/usb/musb/am35x.c @@ -27,6 +27,7 @@ */ #include +#include #include #include #include diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index 4da7492..2613bfd 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -27,6 +27,7 @@ */ #include +#include #include #include #include -- cgit v0.10.2 From 54dc6cabe684375b3cf549c7b0545613d694aba8 Mon Sep 17 00:00:00 2001 From: Johannes Stezenbach Date: Mon, 14 Nov 2011 17:23:16 +0100 Subject: ASoC: sta32x: preserve coefficient RAM The coefficient RAM must be saved in a shadow so it can be restored when the codec is powered on using regulator_bulk_enable(). Signed-off-by: Johannes Stezenbach Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/sound/soc/codecs/sta32x.c b/sound/soc/codecs/sta32x.c index bb82408..d2f3715 100644 --- a/sound/soc/codecs/sta32x.c +++ b/sound/soc/codecs/sta32x.c @@ -76,6 +76,8 @@ struct sta32x_priv { unsigned int mclk; unsigned int format; + + u32 coef_shadow[STA32X_COEF_COUNT]; }; static const DECLARE_TLV_DB_SCALE(mvol_tlv, -12700, 50, 1); @@ -227,6 +229,7 @@ static int sta32x_coefficient_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + struct sta32x_priv *sta32x = snd_soc_codec_get_drvdata(codec); int numcoef = kcontrol->private_value >> 16; int index = kcontrol->private_value & 0xffff; unsigned int cfud; @@ -239,6 +242,11 @@ static int sta32x_coefficient_put(struct snd_kcontrol *kcontrol, snd_soc_write(codec, STA32X_CFUD, cfud); snd_soc_write(codec, STA32X_CFADDR2, index); + for (i = 0; i < numcoef && (index + i < STA32X_COEF_COUNT); i++) + sta32x->coef_shadow[index + i] = + (ucontrol->value.bytes.data[3 * i] << 16) + | (ucontrol->value.bytes.data[3 * i + 1] << 8) + | (ucontrol->value.bytes.data[3 * i + 2]); for (i = 0; i < 3 * numcoef; i++) snd_soc_write(codec, STA32X_B1CF1 + i, ucontrol->value.bytes.data[i]); @@ -252,6 +260,48 @@ static int sta32x_coefficient_put(struct snd_kcontrol *kcontrol, return 0; } +int sta32x_sync_coef_shadow(struct snd_soc_codec *codec) +{ + struct sta32x_priv *sta32x = snd_soc_codec_get_drvdata(codec); + unsigned int cfud; + int i; + + /* preserve reserved bits in STA32X_CFUD */ + cfud = snd_soc_read(codec, STA32X_CFUD) & 0xf0; + + for (i = 0; i < STA32X_COEF_COUNT; i++) { + snd_soc_write(codec, STA32X_CFADDR2, i); + snd_soc_write(codec, STA32X_B1CF1, + (sta32x->coef_shadow[i] >> 16) & 0xff); + snd_soc_write(codec, STA32X_B1CF2, + (sta32x->coef_shadow[i] >> 8) & 0xff); + snd_soc_write(codec, STA32X_B1CF3, + (sta32x->coef_shadow[i]) & 0xff); + /* chip documentation does not say if the bits are + * self-clearing, so do it explicitly */ + snd_soc_write(codec, STA32X_CFUD, cfud); + snd_soc_write(codec, STA32X_CFUD, cfud | 0x01); + } + return 0; +} + +int sta32x_cache_sync(struct snd_soc_codec *codec) +{ + unsigned int mute; + int rc; + + if (!codec->cache_sync) + return 0; + + /* mute during register sync */ + mute = snd_soc_read(codec, STA32X_MMUTE); + snd_soc_write(codec, STA32X_MMUTE, mute | STA32X_MMUTE_MMUTE); + sta32x_sync_coef_shadow(codec); + rc = snd_soc_cache_sync(codec); + snd_soc_write(codec, STA32X_MMUTE, mute); + return rc; +} + #define SINGLE_COEF(xname, index) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ .info = sta32x_coefficient_info, \ @@ -661,7 +711,7 @@ static int sta32x_set_bias_level(struct snd_soc_codec *codec, return ret; } - snd_soc_cache_sync(codec); + sta32x_cache_sync(codec); } /* Power up to mute */ @@ -790,6 +840,17 @@ static int sta32x_probe(struct snd_soc_codec *codec) STA32X_CxCFG_OM_MASK, 2 << STA32X_CxCFG_OM_SHIFT); + /* initialize coefficient shadow RAM with reset values */ + for (i = 4; i <= 49; i += 5) + sta32x->coef_shadow[i] = 0x400000; + for (i = 50; i <= 54; i++) + sta32x->coef_shadow[i] = 0x7fffff; + sta32x->coef_shadow[55] = 0x5a9df7; + sta32x->coef_shadow[56] = 0x7fffff; + sta32x->coef_shadow[59] = 0x7fffff; + sta32x->coef_shadow[60] = 0x400000; + sta32x->coef_shadow[61] = 0x400000; + sta32x_set_bias_level(codec, SND_SOC_BIAS_STANDBY); /* Bias level configuration will have done an extra enable */ regulator_bulk_disable(ARRAY_SIZE(sta32x->supplies), sta32x->supplies); diff --git a/sound/soc/codecs/sta32x.h b/sound/soc/codecs/sta32x.h index b97ee5a..d8e32a6 100644 --- a/sound/soc/codecs/sta32x.h +++ b/sound/soc/codecs/sta32x.h @@ -19,6 +19,7 @@ /* STA326 register addresses */ #define STA32X_REGISTER_COUNT 0x2d +#define STA32X_COEF_COUNT 62 #define STA32X_CONFA 0x00 #define STA32X_CONFB 0x01 -- cgit v0.10.2 From 583182ba5f02c8c9be82ea550f2051eaec15b975 Mon Sep 17 00:00:00 2001 From: Bart Hartgers Date: Wed, 26 Oct 2011 13:29:42 +0200 Subject: USB: ark3116 initialisation fix This patch for the usb serial ark3116 driver fixes an initialisation ordering bug that gets triggered on hotplug when using at least recent debian/ubuntu userspace. Without it, ark3116 serial cables don't work. Signed-off-by: Bart Hartgers Tested-by: law_ence.dev@ntlworld.com Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 5cdb9d9..18e875b 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -42,7 +42,7 @@ static int debug; * Version information */ -#define DRIVER_VERSION "v0.6" +#define DRIVER_VERSION "v0.7" #define DRIVER_AUTHOR "Bart Hartgers " #define DRIVER_DESC "USB ARK3116 serial/IrDA driver" #define DRIVER_DEV_DESC "ARK3116 RS232/IrDA" @@ -380,10 +380,6 @@ static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port) goto err_out; } - /* setup termios */ - if (tty) - ark3116_set_termios(tty, port, NULL); - /* remove any data still left: also clears error state */ ark3116_read_reg(serial, UART_RX, buf); @@ -406,6 +402,10 @@ static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port) /* enable DMA */ ark3116_write_reg(port->serial, UART_FCR, UART_FCR_DMA_SELECT); + /* setup termios */ + if (tty) + ark3116_set_termios(tty, port, NULL); + err_out: kfree(buf); return result; -- cgit v0.10.2 From 97ff22ee3b4cb3a334f7385e269773141aed702f Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 27 Oct 2011 11:20:21 -0400 Subject: USB: workaround for bug in old version of GCC This patch (as1491) works around a bug in GCC-3.4.6, which is still supposed to be supported. The number of microseconds in the udelay() call in quirk_usb_disable_ehci() is fixed at 100, but the compiler doesn't understand this and generates a link-time error. So we replace the otherwise unused variable "delta" with a simple constant 100. This same pattern is already used in other delay loops in that source file. Signed-off-by: Alan Stern Reported-by: Konrad Rzepecki Tested-by: Konrad Rzepecki Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 27a3dec..c7fd6ce 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -627,7 +627,7 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) void __iomem *base, *op_reg_base; u32 hcc_params, cap, val; u8 offset, cap_length; - int wait_time, delta, count = 256/4; + int wait_time, count = 256/4; if (!mmio_resource_enabled(pdev, 0)) return; @@ -673,11 +673,10 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) writel(val, op_reg_base + EHCI_USBCMD); wait_time = 2000; - delta = 100; do { writel(0x3f, op_reg_base + EHCI_USBSTS); - udelay(delta); - wait_time -= delta; + udelay(100); + wait_time -= 100; val = readl(op_reg_base + EHCI_USBSTS); if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) { break; -- cgit v0.10.2 From f69e3120df82391a0ee8118e0a156239a06b2afb Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 3 Nov 2011 11:37:10 -0400 Subject: USB: XHCI: resume root hubs when the controller resumes This patch (as1494) fixes a problem in xhci-hcd's resume routine. When the controller is runtime-resumed, this can only mean that one of the two root hubs has made a wakeup request and therefore needs to be resumed as well. Rather than try to determine which root hub requires attention (which might be difficult in the case where a new non-SuperSpeed device has been plugged in), the patch simply resumes both root hubs. Without this change, there is a race: The controller might be put back to sleep before it can activate its IRQ line, and the wakeup condition might never get handled. The patch also simplifies the logic in xhci_resume a little, combining some repeated flag settings into a single pair of statements. Signed-off-by: Alan Stern CC: Sarah Sharp Cc: stable Tested-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 747c5ea..aa94c01 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -799,7 +799,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) u32 command, temp = 0; struct usb_hcd *hcd = xhci_to_hcd(xhci); struct usb_hcd *secondary_hcd; - int retval; + int retval = 0; /* Wait a bit if either of the roothubs need to settle from the * transition into bus suspend. @@ -809,6 +809,9 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) xhci->bus_state[1].next_statechange)) msleep(100); + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags); + spin_lock_irq(&xhci->lock); if (xhci->quirks & XHCI_RESET_ON_RESUME) hibernated = true; @@ -878,20 +881,13 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) return retval; xhci_dbg(xhci, "Start the primary HCD\n"); retval = xhci_run(hcd->primary_hcd); - if (retval) - goto failed_restart; - - xhci_dbg(xhci, "Start the secondary HCD\n"); - retval = xhci_run(secondary_hcd); if (!retval) { - set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - set_bit(HCD_FLAG_HW_ACCESSIBLE, - &xhci->shared_hcd->flags); + xhci_dbg(xhci, "Start the secondary HCD\n"); + retval = xhci_run(secondary_hcd); } -failed_restart: hcd->state = HC_STATE_SUSPENDED; xhci->shared_hcd->state = HC_STATE_SUSPENDED; - return retval; + goto done; } /* step 4: set Run/Stop bit */ @@ -910,11 +906,14 @@ failed_restart: * Running endpoints by ringing their doorbells */ - set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags); - spin_unlock_irq(&xhci->lock); - return 0; + + done: + if (retval == 0) { + usb_hcd_resume_root_hub(hcd); + usb_hcd_resume_root_hub(xhci->shared_hcd); + } + return retval; } #endif /* CONFIG_PM */ -- cgit v0.10.2 From 811c926c538f7e8d3c08b630dd5844efd7e000f6 Mon Sep 17 00:00:00 2001 From: Thomas Poussevin Date: Thu, 27 Oct 2011 18:46:48 +0200 Subject: USB: EHCI: fix HUB TT scheduling issue with iso transfer The current TT scheduling doesn't allow to play and then record on a full-speed device connected to a high speed hub. The IN iso stream can only start on the first uframe (0-2 for a 165 us) because of CSPLIT transactions. For the OUT iso stream there no such restriction. uframe 0-5 are possible. The idea of this patch is that the first uframe are precious (for IN TT iso stream) and we should allocate the last uframes first if possible. For that we reverse the order of uframe allocation (last uframe first). Here an example : hid interrupt stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | ---------------------------------------------------------------------- iso OUT stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 125 | 39 | 0 | 0 | 0 | 0 | 0 | ---------------------------------------------------------------------- There no place for iso IN stream (uframe 0-2 are used) and we got "cannot submit datapipe for urb 0, error -28: not enough bandwidth" error. With the patch this become. iso OUT stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 0 | 0 | 0 | 125 | 39 | 0 | 0 | ---------------------------------------------------------------------- iso IN stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 0 | 125 | 40 | 125 | 39 | 0 | 0 | ---------------------------------------------------------------------- Signed-off-by: Matthieu Castet Signed-off-by: Thomas Poussevin Signed-off-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index 2e829fa..56a3203 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -1479,10 +1479,15 @@ iso_stream_schedule ( /* NOTE: assumes URB_ISO_ASAP, to limit complexity/bugs */ - /* find a uframe slot with enough bandwidth */ - next = start + period; - for (; start < next; start++) { - + /* find a uframe slot with enough bandwidth. + * Early uframes are more precious because full-speed + * iso IN transfers can't use late uframes, + * and therefore they should be allocated last. + */ + next = start; + start += period; + do { + start--; /* check schedule: enough space? */ if (stream->highspeed) { if (itd_slot_ok(ehci, mod, start, @@ -1495,7 +1500,7 @@ iso_stream_schedule ( start, sched, period)) break; } - } + } while (start > next); /* no room in the schedule */ if (start == next) { -- cgit v0.10.2 From 60c71ca972a2dd3fd9d0165b405361c8ad48349b Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Wed, 26 Oct 2011 13:53:17 -0400 Subject: USB: add quirk for Logitech C600 web cam We've had another report of the "chipmunk" sound on a Logitech C600 webcam. This patch resolves the issue. Cc: stable Signed-off-by: Josh Boyer Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index d6a8d82..caa1991 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -50,6 +50,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Logitech Webcam B/C500 */ { USB_DEVICE(0x046d, 0x0807), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Webcam C600 */ + { USB_DEVICE(0x046d, 0x0808), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Webcam Pro 9000 */ { USB_DEVICE(0x046d, 0x0809), .driver_info = USB_QUIRK_RESET_RESUME }, -- cgit v0.10.2 From 5dc2470c602da8851907ec18942cd876c3b4ecc1 Mon Sep 17 00:00:00 2001 From: Havard Skinnemoen Date: Wed, 9 Nov 2011 13:47:38 -0800 Subject: USB: cdc-acm: Fix disconnect() vs close() race There's a race between the USB disconnect handler and the TTY close handler which may cause the acm object to be freed while it's still being used. This may lead to things like http://article.gmane.org/gmane.linux.usb.general/54250 and https://lkml.org/lkml/2011/5/29/64 This is the simplest fix I could come up with. Holding on to open_mutex while closing the TTY device prevents acm_disconnect() from freeing the acm object between acm->port.count drops to 0 and the TTY side of the cleanups are finalized. Signed-off-by: Havard Skinnemoen Cc: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 6960715..e8c564a 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -539,7 +539,6 @@ static void acm_port_down(struct acm *acm) { int i; - mutex_lock(&open_mutex); if (acm->dev) { usb_autopm_get_interface(acm->control); acm_set_control(acm, acm->ctrlout = 0); @@ -551,14 +550,15 @@ static void acm_port_down(struct acm *acm) acm->control->needs_remote_wakeup = 0; usb_autopm_put_interface(acm->control); } - mutex_unlock(&open_mutex); } static void acm_tty_hangup(struct tty_struct *tty) { struct acm *acm = tty->driver_data; tty_port_hangup(&acm->port); + mutex_lock(&open_mutex); acm_port_down(acm); + mutex_unlock(&open_mutex); } static void acm_tty_close(struct tty_struct *tty, struct file *filp) @@ -569,8 +569,9 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp) shutdown */ if (!acm) return; + + mutex_lock(&open_mutex); if (tty_port_close_start(&acm->port, tty, filp) == 0) { - mutex_lock(&open_mutex); if (!acm->dev) { tty_port_tty_set(&acm->port, NULL); acm_tty_unregister(acm); @@ -582,6 +583,7 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp) acm_port_down(acm); tty_port_close_end(&acm->port, tty); tty_port_tty_set(&acm->port, NULL); + mutex_unlock(&open_mutex); } static int acm_tty_write(struct tty_struct *tty, -- cgit v0.10.2 From 770f0baaee0c511d0d466082e72815ed861e301f Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sat, 12 Nov 2011 16:46:13 +0100 Subject: USB: at91: at91-ohci: fix set/get power in commit aa6e52a35 we introduce the support of overcurrent notification but the set and get of the power without checking if the gpio is valid or not Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Thomas Petazzoni Acked-by: Nicolas Ferre Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index ba3a46b..95a9fec 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -223,6 +223,9 @@ static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int if (port < 0 || port >= 2) return; + if (pdata->vbus_pin[port] <= 0) + return; + gpio_set_value(pdata->vbus_pin[port], !pdata->vbus_pin_inverted ^ enable); } @@ -231,6 +234,9 @@ static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port) if (port < 0 || port >= 2) return -EINVAL; + if (pdata->vbus_pin[port] <= 0) + return -EINVAL; + return gpio_get_value(pdata->vbus_pin[port]) ^ !pdata->vbus_pin_inverted; } -- cgit v0.10.2 From 8981d76a2cf4c46333d9a18176a6eee337a71146 Mon Sep 17 00:00:00 2001 From: Shaohui Xie Date: Mon, 7 Nov 2011 16:58:20 +0800 Subject: powerpc/usb: fix type cast for address of ioremap to compatible with 64-bit Below are codes for accessing usb sysif_regs in driver: usb_sys_regs = (struct usb_sys_interface *) ((u32)dr_regs + USB_DR_SYS_OFFSET); these codes work in 32-bit, but in 64-bit, use u32 to type cast the address of ioremap is not right, and accessing members of 'usb_sys_regs' will cause call trace, so use (void *) for both 32-bit and 64-bit. Signed-off-by: Shaohui Xie Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index d786ba3..b3b3d83 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -2480,8 +2480,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev) #ifndef CONFIG_ARCH_MXC if (pdata->have_sysif_regs) - usb_sys_regs = (struct usb_sys_interface *) - ((u32)dr_regs + USB_DR_SYS_OFFSET); + usb_sys_regs = (void *)dr_regs + USB_DR_SYS_OFFSET; #endif /* Initialize USB clocks */ -- cgit v0.10.2 From 46e642614b360ae783ce32b43dd885b797352635 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Sun, 30 Oct 2011 07:34:04 -0700 Subject: MAINTAINERS: add CHAR and MISC driver maintainers Yes, we are fools, but humor us. Signed-off-by: Greg Kroah-Hartman Acked-by: Arnd Bergmann diff --git a/MAINTAINERS b/MAINTAINERS index 4808256..c9c0643 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1788,6 +1788,14 @@ F: include/net/cfg80211.h F: net/wireless/* X: net/wireless/wext* +CHAR and MISC DRIVERS +M: Arnd Bergmann +M: Greg Kroah-Hartman +T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git +S: Maintained +F: drivers/char/* +F: drivers/misc/* + CHECKPATCH M: Andy Whitcroft S: Supported -- cgit v0.10.2 From 161f14191dc166c4e3f37f68af1bc199c6868b7d Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 31 Oct 2011 10:20:28 +0800 Subject: pcie-gadget-spear: Add "platform:" prefix for platform modalias Since 43cc71eed1250755986da4c0f9898f9a635cb3bf (platform: prefix MODALIAS with "platform:"), the platform modalias is prefixed with "platform:". Signed-off-by: Axel Lin Acked-by: Pratyush Anand Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/misc/spear13xx_pcie_gadget.c b/drivers/misc/spear13xx_pcie_gadget.c index cfbddbe..43d073b 100644 --- a/drivers/misc/spear13xx_pcie_gadget.c +++ b/drivers/misc/spear13xx_pcie_gadget.c @@ -903,6 +903,6 @@ static void __exit spear_pcie_gadget_exit(void) } module_exit(spear_pcie_gadget_exit); -MODULE_ALIAS("pcie-gadget-spear"); +MODULE_ALIAS("platform:pcie-gadget-spear"); MODULE_AUTHOR("Pratyush Anand"); MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 0d145d7d4a241c321c832a810bb6edad18e2217b Mon Sep 17 00:00:00 2001 From: sordna Date: Thu, 27 Oct 2011 21:06:26 -0700 Subject: USB: quirks: adding more quirky webcams to avoid squeaky audio The following patch contains additional affected webcam models, on top of the patches commited to linux-next 2394d67e446bf616a0885167d5f0d397bdacfdfc and 5b253d88cc6c65a23cefc457a5a4ef139913c5fc Signed-off-by: sordna Cc: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index caa1991..ecf12e1 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -56,12 +56,36 @@ static const struct usb_device_id usb_quirk_list[] = { /* Logitech Webcam Pro 9000 */ { USB_DEVICE(0x046d, 0x0809), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Webcam C905 */ + { USB_DEVICE(0x046d, 0x080a), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Webcam C210 */ + { USB_DEVICE(0x046d, 0x0819), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Webcam C260 */ + { USB_DEVICE(0x046d, 0x081a), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Webcam C310 */ { USB_DEVICE(0x046d, 0x081b), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Webcam C910 */ + { USB_DEVICE(0x046d, 0x0821), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Webcam C160 */ + { USB_DEVICE(0x046d, 0x0824), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Webcam C270 */ { USB_DEVICE(0x046d, 0x0825), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Quickcam Pro 9000 */ + { USB_DEVICE(0x046d, 0x0990), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Quickcam E3500 */ + { USB_DEVICE(0x046d, 0x09a4), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Quickcam Vision Pro */ + { USB_DEVICE(0x046d, 0x09a6), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Harmony 700-series */ { USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT }, -- cgit v0.10.2 From 2f640bf4c94324aeaa1b6385c10aab8c5ad1e1cf Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 25 Oct 2011 10:50:58 -0400 Subject: usb-storage: Accept 8020i-protocol commands longer than 12 bytes The 8020i protocol (also 8070i and QIC-157) uses 12-byte commands; shorter commands must be padded. Simon Detheridge reports that his 3-TB USB disk drive claims to use the 8020i protocol (which is normally meant for ATAPI devices like CD drives), and because of its large size, the disk drive requires the use of 16-byte commands. However the usb_stor_pad12_command() routine in usb-storage always sets the command length to 12, making the drive impossible to use. Since the SFF-8020i specification allows for 16-byte commands in future extensions, we may as well accept them. This patch (as1490) changes usb_stor_pad12_command() to leave commands larger than 12 bytes alone rather than truncating them. Signed-off-by: Alan Stern Tested-by: Simon Detheridge CC: Matthew Dharm Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/storage/protocol.c b/drivers/usb/storage/protocol.c index 93c1a4d..82dd834 100644 --- a/drivers/usb/storage/protocol.c +++ b/drivers/usb/storage/protocol.c @@ -59,7 +59,9 @@ void usb_stor_pad12_command(struct scsi_cmnd *srb, struct us_data *us) { - /* Pad the SCSI command with zeros out to 12 bytes + /* + * Pad the SCSI command with zeros out to 12 bytes. If the + * command already is 12 bytes or longer, leave it alone. * * NOTE: This only works because a scsi_cmnd struct field contains * a unsigned char cmnd[16], so we know we have storage available @@ -67,9 +69,6 @@ void usb_stor_pad12_command(struct scsi_cmnd *srb, struct us_data *us) for (; srb->cmd_len<12; srb->cmd_len++) srb->cmnd[srb->cmd_len] = 0; - /* set command length to 12 bytes */ - srb->cmd_len = 12; - /* send the command to the transport layer */ usb_stor_invoke_transport(srb, us); } -- cgit v0.10.2 From 7db3eba6bf84ab744e39dcce24b7e06d01bab913 Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Tue, 18 Oct 2011 16:58:05 +0900 Subject: drm/exynos: added kms poll for handling hpd event this patch adds kms poll infrastructure to handle hotplug detection event Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c index 83810cb..53e2216 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c @@ -27,6 +27,7 @@ #include "drmP.h" #include "drm.h" +#include "drm_crtc_helper.h" #include @@ -61,6 +62,9 @@ static int exynos_drm_load(struct drm_device *dev, unsigned long flags) drm_mode_config_init(dev); + /* init kms poll for handling hpd */ + drm_kms_helper_poll_init(dev); + exynos_drm_mode_config_init(dev); /* @@ -116,6 +120,7 @@ static int exynos_drm_unload(struct drm_device *dev) exynos_drm_fbdev_fini(dev); exynos_drm_device_unregister(dev); drm_vblank_cleanup(dev); + drm_kms_helper_poll_fini(dev); drm_mode_config_cleanup(dev); kfree(dev->dev_private); diff --git a/drivers/gpu/drm/exynos/exynos_drm_fb.c b/drivers/gpu/drm/exynos/exynos_drm_fb.c index 48d29cf..7d91a54 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fb.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fb.c @@ -29,7 +29,9 @@ #include "drmP.h" #include "drm_crtc.h" #include "drm_crtc_helper.h" +#include "drm_fb_helper.h" +#include "exynos_drm_drv.h" #include "exynos_drm_fb.h" #include "exynos_drm_buf.h" #include "exynos_drm_gem.h" @@ -238,8 +240,18 @@ struct exynos_drm_buf_entry *exynos_drm_fb_get_buf(struct drm_framebuffer *fb) return entry; } +static void exynos_drm_output_poll_changed(struct drm_device *dev) +{ + struct exynos_drm_private *private = dev->dev_private; + struct drm_fb_helper *fb_helper = private->fb_helper; + + if (fb_helper) + drm_fb_helper_hotplug_event(fb_helper); +} + static struct drm_mode_config_funcs exynos_drm_mode_config_funcs = { .fb_create = exynos_drm_fb_create, + .output_poll_changed = exynos_drm_output_poll_changed, }; void exynos_drm_mode_config_init(struct drm_device *dev) -- cgit v0.10.2 From 1b17b206560c433ae9e8f8409f3f3842949a74c8 Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Wed, 19 Oct 2011 15:10:10 +0900 Subject: drm/exynos: fixed connector flag with hpd and interlace scan for hdmi hdmi display in exynos supports hotplug event and interlace scan mode Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_connector.c b/drivers/gpu/drm/exynos/exynos_drm_connector.c index 985d9e7..d1a459f 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_connector.c +++ b/drivers/gpu/drm/exynos/exynos_drm_connector.c @@ -254,6 +254,8 @@ struct drm_connector *exynos_drm_connector_create(struct drm_device *dev, switch (manager->display->type) { case EXYNOS_DISPLAY_TYPE_HDMI: type = DRM_MODE_CONNECTOR_HDMIA; + connector->interlace_allowed = true; + connector->polled = DRM_CONNECTOR_POLL_HPD; break; default: type = DRM_MODE_CONNECTOR_Unknown; -- cgit v0.10.2 From 8b58dfe0290cb57e3f8601b197f00c23fa39a60d Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Wed, 19 Oct 2011 15:11:55 +0900 Subject: drm/exynos: fixed converting between display mode and timing missing members are added into converting function between timing and display mode and refresh rate of display mode is calculated by drm mode function. Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_connector.c b/drivers/gpu/drm/exynos/exynos_drm_connector.c index d1a459f..7ca1274 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_connector.c +++ b/drivers/gpu/drm/exynos/exynos_drm_connector.c @@ -47,6 +47,7 @@ convert_to_display_mode(struct drm_display_mode *mode, DRM_DEBUG_KMS("%s\n", __FILE__); mode->clock = timing->pixclock / 1000; + mode->vrefresh = timing->refresh; mode->hdisplay = timing->xres; mode->hsync_start = mode->hdisplay + timing->left_margin; @@ -57,6 +58,12 @@ convert_to_display_mode(struct drm_display_mode *mode, mode->vsync_start = mode->vdisplay + timing->upper_margin; mode->vsync_end = mode->vsync_start + timing->vsync_len; mode->vtotal = mode->vsync_end + timing->lower_margin; + + if (timing->vmode & FB_VMODE_INTERLACED) + mode->flags |= DRM_MODE_FLAG_INTERLACE; + + if (timing->vmode & FB_VMODE_DOUBLE) + mode->flags |= DRM_MODE_FLAG_DBLSCAN; } /* convert drm_display_mode to exynos_video_timings */ @@ -69,7 +76,7 @@ convert_to_video_timing(struct fb_videomode *timing, memset(timing, 0, sizeof(*timing)); timing->pixclock = mode->clock * 1000; - timing->refresh = mode->vrefresh; + timing->refresh = drm_mode_vrefresh(mode); timing->xres = mode->hdisplay; timing->left_margin = mode->hsync_start - mode->hdisplay; -- cgit v0.10.2 From adb6b1596743e93e50fad2ff26d9604cda4361ab Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Wed, 19 Oct 2011 17:16:55 +0900 Subject: drm/exynos: added manager object to connector connector contains some contents for display controller so the connector also should be able to access controller through manager. Signed-off-by: Inki Dae Signed-off-by: Seung-Woo Kim Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_connector.c b/drivers/gpu/drm/exynos/exynos_drm_connector.c index 7ca1274..d33f803 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_connector.c +++ b/drivers/gpu/drm/exynos/exynos_drm_connector.c @@ -37,6 +37,8 @@ struct exynos_drm_connector { struct drm_connector drm_connector; + uint32_t encoder_id; + struct exynos_drm_manager *manager; }; /* convert exynos_video_timings to drm_display_mode */ @@ -99,8 +101,9 @@ convert_to_video_timing(struct fb_videomode *timing, static int exynos_drm_connector_get_modes(struct drm_connector *connector) { - struct exynos_drm_manager *manager = - exynos_drm_get_manager(connector->encoder); + struct exynos_drm_connector *exynos_connector = + to_exynos_connector(connector); + struct exynos_drm_manager *manager = exynos_connector->manager; struct exynos_drm_display *display = manager->display; unsigned int count; @@ -169,8 +172,9 @@ static int exynos_drm_connector_get_modes(struct drm_connector *connector) static int exynos_drm_connector_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { - struct exynos_drm_manager *manager = - exynos_drm_get_manager(connector->encoder); + struct exynos_drm_connector *exynos_connector = + to_exynos_connector(connector); + struct exynos_drm_manager *manager = exynos_connector->manager; struct exynos_drm_display *display = manager->display; struct fb_videomode timing; int ret = MODE_BAD; @@ -188,9 +192,25 @@ static int exynos_drm_connector_mode_valid(struct drm_connector *connector, struct drm_encoder *exynos_drm_best_encoder(struct drm_connector *connector) { + struct drm_device *dev = connector->dev; + struct exynos_drm_connector *exynos_connector = + to_exynos_connector(connector); + struct drm_mode_object *obj; + struct drm_encoder *encoder; + DRM_DEBUG_KMS("%s\n", __FILE__); - return connector->encoder; + obj = drm_mode_object_find(dev, exynos_connector->encoder_id, + DRM_MODE_OBJECT_ENCODER); + if (!obj) { + DRM_DEBUG_KMS("Unknown ENCODER ID %d\n", + exynos_connector->encoder_id); + return NULL; + } + + encoder = obj_to_encoder(obj); + + return encoder; } static struct drm_connector_helper_funcs exynos_connector_helper_funcs = { @@ -203,8 +223,9 @@ static struct drm_connector_helper_funcs exynos_connector_helper_funcs = { static enum drm_connector_status exynos_drm_connector_detect(struct drm_connector *connector, bool force) { - struct exynos_drm_manager *manager = - exynos_drm_get_manager(connector->encoder); + struct exynos_drm_connector *exynos_connector = + to_exynos_connector(connector); + struct exynos_drm_manager *manager = exynos_connector->manager; struct exynos_drm_display *display = manager->display; enum drm_connector_status status = connector_status_disconnected; @@ -276,7 +297,10 @@ struct drm_connector *exynos_drm_connector_create(struct drm_device *dev, if (err) goto err_connector; + exynos_connector->encoder_id = encoder->base.id; + exynos_connector->manager = manager; connector->encoder = encoder; + err = drm_mode_connector_attach_encoder(connector, encoder); if (err) { DRM_ERROR("failed to attach a connector to a encoder\n"); diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.c b/drivers/gpu/drm/exynos/exynos_drm_encoder.c index 7cf6fa8..4e5535b 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_encoder.c +++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.c @@ -58,7 +58,8 @@ static void exynos_drm_encoder_dpms(struct drm_encoder *encoder, int mode) list_for_each_entry(connector, &dev->mode_config.connector_list, head) { if (connector->encoder == encoder) { - struct exynos_drm_display *display = manager->display; + struct exynos_drm_display *display = + manager->display; if (display && display->power_on) display->power_on(manager->dev, mode); -- cgit v0.10.2 From 74ccc539bcebdb24afb74194223f92a96a7285ed Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Wed, 19 Oct 2011 17:23:07 +0900 Subject: drm/exynos: changed exynos_drm_display to exynos_drm_display_ops exynos_drm_display has function pointes so exynos_drm_display_ops is better to describe. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_connector.c b/drivers/gpu/drm/exynos/exynos_drm_connector.c index d33f803..d620b07 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_connector.c +++ b/drivers/gpu/drm/exynos/exynos_drm_connector.c @@ -104,13 +104,13 @@ static int exynos_drm_connector_get_modes(struct drm_connector *connector) struct exynos_drm_connector *exynos_connector = to_exynos_connector(connector); struct exynos_drm_manager *manager = exynos_connector->manager; - struct exynos_drm_display *display = manager->display; + struct exynos_drm_display_ops *display_ops = manager->display_ops; unsigned int count; DRM_DEBUG_KMS("%s\n", __FILE__); - if (!display) { - DRM_DEBUG_KMS("display is null.\n"); + if (!display_ops) { + DRM_DEBUG_KMS("display_ops is null.\n"); return 0; } @@ -122,7 +122,7 @@ static int exynos_drm_connector_get_modes(struct drm_connector *connector) * P.S. in case of lcd panel, count is always 1 if success * because lcd panel has only one mode. */ - if (display->get_edid) { + if (display_ops->get_edid) { int ret; void *edid; @@ -132,7 +132,7 @@ static int exynos_drm_connector_get_modes(struct drm_connector *connector) return 0; } - ret = display->get_edid(manager->dev, connector, + ret = display_ops->get_edid(manager->dev, connector, edid, MAX_EDID); if (ret < 0) { DRM_ERROR("failed to get edid data.\n"); @@ -150,8 +150,8 @@ static int exynos_drm_connector_get_modes(struct drm_connector *connector) struct drm_display_mode *mode = drm_mode_create(connector->dev); struct fb_videomode *timing; - if (display->get_timing) - timing = display->get_timing(manager->dev); + if (display_ops->get_timing) + timing = display_ops->get_timing(manager->dev); else { drm_mode_destroy(connector->dev, mode); return 0; @@ -175,7 +175,7 @@ static int exynos_drm_connector_mode_valid(struct drm_connector *connector, struct exynos_drm_connector *exynos_connector = to_exynos_connector(connector); struct exynos_drm_manager *manager = exynos_connector->manager; - struct exynos_drm_display *display = manager->display; + struct exynos_drm_display_ops *display_ops = manager->display_ops; struct fb_videomode timing; int ret = MODE_BAD; @@ -183,8 +183,8 @@ static int exynos_drm_connector_mode_valid(struct drm_connector *connector, convert_to_video_timing(&timing, mode); - if (display && display->check_timing) - if (!display->check_timing(manager->dev, (void *)&timing)) + if (display_ops && display_ops->check_timing) + if (!display_ops->check_timing(manager->dev, (void *)&timing)) ret = MODE_OK; return ret; @@ -226,13 +226,14 @@ exynos_drm_connector_detect(struct drm_connector *connector, bool force) struct exynos_drm_connector *exynos_connector = to_exynos_connector(connector); struct exynos_drm_manager *manager = exynos_connector->manager; - struct exynos_drm_display *display = manager->display; + struct exynos_drm_display_ops *display_ops = + manager->display_ops; enum drm_connector_status status = connector_status_disconnected; DRM_DEBUG_KMS("%s\n", __FILE__); - if (display && display->is_connected) { - if (display->is_connected(manager->dev)) + if (display_ops && display_ops->is_connected) { + if (display_ops->is_connected(manager->dev)) status = connector_status_connected; else status = connector_status_disconnected; @@ -279,7 +280,7 @@ struct drm_connector *exynos_drm_connector_create(struct drm_device *dev, connector = &exynos_connector->drm_connector; - switch (manager->display->type) { + switch (manager->display_ops->type) { case EXYNOS_DISPLAY_TYPE_HDMI: type = DRM_MODE_CONNECTOR_HDMIA; connector->interlace_allowed = true; diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h index c03683f..1575e5f 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h @@ -130,7 +130,7 @@ struct exynos_drm_overlay { * @check_timing: check if timing is valid or not. * @power_on: display device on or off. */ -struct exynos_drm_display { +struct exynos_drm_display_ops { enum exynos_drm_output_type type; bool (*is_connected)(struct device *dev); int (*get_edid)(struct device *dev, struct drm_connector *connector, @@ -178,7 +178,7 @@ struct exynos_drm_manager { int pipe; struct exynos_drm_manager_ops *ops; struct exynos_drm_overlay_ops *overlay_ops; - struct exynos_drm_display *display; + struct exynos_drm_display_ops *display_ops; }; /* diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.c b/drivers/gpu/drm/exynos/exynos_drm_encoder.c index 4e5535b..0034fa7 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_encoder.c +++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.c @@ -58,11 +58,11 @@ static void exynos_drm_encoder_dpms(struct drm_encoder *encoder, int mode) list_for_each_entry(connector, &dev->mode_config.connector_list, head) { if (connector->encoder == encoder) { - struct exynos_drm_display *display = - manager->display; + struct exynos_drm_display_ops *display_ops = + manager->display_ops; - if (display && display->power_on) - display->power_on(manager->dev, mode); + if (display_ops && display_ops->power_on) + display_ops->power_on(manager->dev, mode); } } } diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 4659c88..f2d883f 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -124,7 +124,7 @@ static int fimd_display_power_on(struct device *dev, int mode) return 0; } -static struct exynos_drm_display fimd_display = { +static struct exynos_drm_display_ops fimd_display_ops = { .type = EXYNOS_DISPLAY_TYPE_LCD, .is_connected = fimd_display_is_connected, .get_timing = fimd_get_timing, @@ -731,7 +731,7 @@ static int __devinit fimd_probe(struct platform_device *pdev) subdrv->manager.pipe = -1; subdrv->manager.ops = &fimd_manager_ops; subdrv->manager.overlay_ops = &fimd_overlay_ops; - subdrv->manager.display = &fimd_display; + subdrv->manager.display_ops = &fimd_display_ops; subdrv->manager.dev = dev; platform_set_drvdata(pdev, ctx); -- cgit v0.10.2 From 84b46990cb2caf8efe20d5626e1d7e2e40bab832 Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Fri, 4 Nov 2011 13:41:46 +0900 Subject: drm/exynos: restored kernel_fb_list when reiniting fb_helper during recreating exynos_drm_fbdev as a new display device probes, fb_helper is reinitialized but kernel fb is not changed so kernel_fb_list should be restored after fb_helper is reinitialized. Signed-off-by: Joonyoung Shim Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c index 1f4b3d1..74092a8 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c @@ -405,6 +405,18 @@ int exynos_drm_fbdev_reinit(struct drm_device *dev) fb_helper = private->fb_helper; if (fb_helper) { + struct list_head temp_list; + + INIT_LIST_HEAD(&temp_list); + + /* + * fb_helper is reintialized but kernel fb is reused + * so kernel_fb_list need to be backuped and restored + */ + if (!list_empty(&fb_helper->kernel_fb_list)) + list_replace_init(&fb_helper->kernel_fb_list, + &temp_list); + drm_fb_helper_fini(fb_helper); ret = drm_fb_helper_init(dev, fb_helper, @@ -414,6 +426,9 @@ int exynos_drm_fbdev_reinit(struct drm_device *dev) return ret; } + if (!list_empty(&temp_list)) + list_replace(&temp_list, &fb_helper->kernel_fb_list); + ret = drm_fb_helper_single_add_all_connectors(fb_helper); if (ret < 0) { DRM_ERROR("failed to add fb helper to connectors\n"); -- cgit v0.10.2 From aa6b2b6cd43e4a23c2a220382a8b385b087d8bca Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Fri, 4 Nov 2011 13:44:38 +0900 Subject: drm/exynos: removed meaningless parameter from fbdev update drm_framebuffer already has width and height so they are meaningless as parameters when updating fb_info. Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c index 74092a8..0effd77 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c @@ -85,15 +85,13 @@ static struct fb_ops exynos_drm_fb_ops = { }; static int exynos_drm_fbdev_update(struct drm_fb_helper *helper, - struct drm_framebuffer *fb, - unsigned int fb_width, - unsigned int fb_height) + struct drm_framebuffer *fb) { struct fb_info *fbi = helper->fbdev; struct drm_device *dev = helper->dev; struct exynos_drm_fbdev *exynos_fb = to_exynos_fbdev(helper); struct exynos_drm_buf_entry *entry; - unsigned int size = fb_width * fb_height * (fb->bits_per_pixel >> 3); + unsigned int size = fb->width * fb->height * (fb->bits_per_pixel >> 3); unsigned long offset; DRM_DEBUG_KMS("%s\n", __FILE__); @@ -101,7 +99,7 @@ static int exynos_drm_fbdev_update(struct drm_fb_helper *helper, exynos_fb->fb = fb; drm_fb_helper_fill_fix(fbi, fb->pitch, fb->depth); - drm_fb_helper_fill_var(fbi, helper, fb_width, fb_height); + drm_fb_helper_fill_var(fbi, helper, fb->width, fb->height); entry = exynos_drm_fb_get_buf(fb); if (!entry) { @@ -171,8 +169,7 @@ static int exynos_drm_fbdev_create(struct drm_fb_helper *helper, goto out; } - ret = exynos_drm_fbdev_update(helper, helper->fb, sizes->fb_width, - sizes->fb_height); + ret = exynos_drm_fbdev_update(helper, helper->fb); if (ret < 0) fb_dealloc_cmap(&fbi->cmap); @@ -235,8 +232,7 @@ static int exynos_drm_fbdev_recreate(struct drm_fb_helper *helper, } helper->fb = exynos_fbdev->fb; - return exynos_drm_fbdev_update(helper, helper->fb, sizes->fb_width, - sizes->fb_height); + return exynos_drm_fbdev_update(helper, helper->fb); } static int exynos_drm_fbdev_probe(struct drm_fb_helper *helper, -- cgit v0.10.2 From d2716c896d305fb5d3d0d7f58394c17841ed2967 Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Fri, 4 Nov 2011 17:04:45 +0900 Subject: drm/exynos: added crtc dpms for disable crtc crtc dpms is called as destroying attached fb so dpms off sould be processed. crtc dpms also can be called after crtc is detached from encoder so pipe value of manager is used to find display controller for this case Signed-off-by: Joonyoung Shim Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c index 9337e5e..b1d6526 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c @@ -85,7 +85,8 @@ static void exynos_drm_crtc_apply(struct drm_crtc *crtc) exynos_drm_fn_encoder(crtc, overlay, exynos_drm_encoder_crtc_mode_set); - exynos_drm_fn_encoder(crtc, NULL, exynos_drm_encoder_crtc_commit); + exynos_drm_fn_encoder(crtc, &exynos_crtc->pipe, + exynos_drm_encoder_crtc_commit); } static int exynos_drm_overlay_update(struct exynos_drm_overlay *overlay, @@ -171,9 +172,26 @@ static int exynos_drm_crtc_update(struct drm_crtc *crtc) static void exynos_drm_crtc_dpms(struct drm_crtc *crtc, int mode) { - DRM_DEBUG_KMS("%s\n", __FILE__); + struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc); - /* TODO */ + DRM_DEBUG_KMS("crtc[%d] mode[%d]\n", crtc->base.id, mode); + + switch (mode) { + case DRM_MODE_DPMS_ON: + exynos_drm_fn_encoder(crtc, &exynos_crtc->pipe, + exynos_drm_encoder_crtc_commit); + break; + case DRM_MODE_DPMS_STANDBY: + case DRM_MODE_DPMS_SUSPEND: + case DRM_MODE_DPMS_OFF: + /* TODO */ + exynos_drm_fn_encoder(crtc, NULL, + exynos_drm_encoder_crtc_disable); + break; + default: + DRM_DEBUG_KMS("unspecified mode %d\n", mode); + break; + } } static void exynos_drm_crtc_prepare(struct drm_crtc *crtc) @@ -185,9 +203,12 @@ static void exynos_drm_crtc_prepare(struct drm_crtc *crtc) static void exynos_drm_crtc_commit(struct drm_crtc *crtc) { + struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc); + DRM_DEBUG_KMS("%s\n", __FILE__); - /* drm framework doesn't check NULL. */ + exynos_drm_fn_encoder(crtc, &exynos_crtc->pipe, + exynos_drm_encoder_crtc_commit); } static bool diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.c b/drivers/gpu/drm/exynos/exynos_drm_encoder.c index 0034fa7..f15da95 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_encoder.c +++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.c @@ -61,6 +61,8 @@ static void exynos_drm_encoder_dpms(struct drm_encoder *encoder, int mode) struct exynos_drm_display_ops *display_ops = manager->display_ops; + DRM_DEBUG_KMS("connector[%d] dpms[%d]\n", + connector->base.id, mode); if (display_ops && display_ops->power_on) display_ops->power_on(manager->dev, mode); } @@ -117,15 +119,11 @@ static void exynos_drm_encoder_commit(struct drm_encoder *encoder) { struct exynos_drm_manager *manager = exynos_drm_get_manager(encoder); struct exynos_drm_manager_ops *manager_ops = manager->ops; - struct exynos_drm_overlay_ops *overlay_ops = manager->overlay_ops; DRM_DEBUG_KMS("%s\n", __FILE__); if (manager_ops && manager_ops->commit) manager_ops->commit(manager->dev); - - if (overlay_ops && overlay_ops->commit) - overlay_ops->commit(manager->dev); } static struct drm_crtc * @@ -209,10 +207,23 @@ void exynos_drm_fn_encoder(struct drm_crtc *crtc, void *data, { struct drm_device *dev = crtc->dev; struct drm_encoder *encoder; + struct exynos_drm_private *private = dev->dev_private; + struct exynos_drm_manager *manager; list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { - if (encoder->crtc != crtc) - continue; + /* + * if crtc is detached from encoder, check pipe, + * otherwise check crtc attached to encoder + */ + if (!encoder->crtc) { + manager = to_exynos_encoder(encoder)->manager; + if (manager->pipe < 0 || + private->crtc[manager->pipe] != crtc) + continue; + } else { + if (encoder->crtc != crtc) + continue; + } fn(encoder, data); } @@ -251,8 +262,18 @@ void exynos_drm_encoder_crtc_commit(struct drm_encoder *encoder, void *data) struct exynos_drm_manager *manager = to_exynos_encoder(encoder)->manager; struct exynos_drm_overlay_ops *overlay_ops = manager->overlay_ops; + int crtc = *(int *)data; + + DRM_DEBUG_KMS("%s\n", __FILE__); - overlay_ops->commit(manager->dev); + /* + * when crtc is detached from encoder, this pipe is used + * to select manager operation + */ + manager->pipe = crtc; + + if (overlay_ops && overlay_ops->commit) + overlay_ops->commit(manager->dev); } void exynos_drm_encoder_crtc_mode_set(struct drm_encoder *encoder, void *data) @@ -265,6 +286,25 @@ void exynos_drm_encoder_crtc_mode_set(struct drm_encoder *encoder, void *data) overlay_ops->mode_set(manager->dev, overlay); } +void exynos_drm_encoder_crtc_disable(struct drm_encoder *encoder, void *data) +{ + struct exynos_drm_manager *manager = + to_exynos_encoder(encoder)->manager; + struct exynos_drm_overlay_ops *overlay_ops = manager->overlay_ops; + + DRM_DEBUG_KMS("\n"); + + overlay_ops->disable(manager->dev); + + /* + * crtc is already detached from encoder and last + * function for detaching is properly done, so + * clear pipe from manager to prevent repeated call + */ + if (!encoder->crtc) + manager->pipe = -1; +} + MODULE_AUTHOR("Inki Dae "); MODULE_AUTHOR("Joonyoung Shim "); MODULE_AUTHOR("Seung-Woo Kim "); diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.h b/drivers/gpu/drm/exynos/exynos_drm_encoder.h index 5ecd645..a22acfb 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_encoder.h +++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.h @@ -41,5 +41,6 @@ void exynos_drm_enable_vblank(struct drm_encoder *encoder, void *data); void exynos_drm_disable_vblank(struct drm_encoder *encoder, void *data); void exynos_drm_encoder_crtc_commit(struct drm_encoder *encoder, void *data); void exynos_drm_encoder_crtc_mode_set(struct drm_encoder *encoder, void *data); +void exynos_drm_encoder_crtc_disable(struct drm_encoder *encoder, void *data); #endif -- cgit v0.10.2 From b0e0f85631f9d905095d2896a952430f5eb0aba1 Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Fri, 4 Nov 2011 17:31:41 +0900 Subject: drm/exynos: checked for null pointer Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.c b/drivers/gpu/drm/exynos/exynos_drm_encoder.c index f15da95..866f419 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_encoder.c +++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.c @@ -283,7 +283,8 @@ void exynos_drm_encoder_crtc_mode_set(struct drm_encoder *encoder, void *data) struct exynos_drm_overlay_ops *overlay_ops = manager->overlay_ops; struct exynos_drm_overlay *overlay = data; - overlay_ops->mode_set(manager->dev, overlay); + if (overlay_ops && overlay_ops->mode_set) + overlay_ops->mode_set(manager->dev, overlay); } void exynos_drm_encoder_crtc_disable(struct drm_encoder *encoder, void *data) @@ -294,7 +295,8 @@ void exynos_drm_encoder_crtc_disable(struct drm_encoder *encoder, void *data) DRM_DEBUG_KMS("\n"); - overlay_ops->disable(manager->dev); + if (overlay_ops && overlay_ops->disable) + overlay_ops->disable(manager->dev); /* * crtc is already detached from encoder and last -- cgit v0.10.2 From f088d5a9c5dd22b6559fa3f3939973bc374c977b Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Sat, 12 Nov 2011 14:51:23 +0900 Subject: drm/exynos: use gem create function generically this patch addes exynos_drm_gem_init() creating and initialzing a gem. allocation functions could use this function to create new gem and it changes size type of exynos_drm_gem_create structure to 64bit and also corrects comments to exynos_drm_gem_create structure. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_fb.c b/drivers/gpu/drm/exynos/exynos_drm_fb.c index 7d91a54..8d0f662 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fb.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fb.c @@ -165,9 +165,9 @@ exynos_drm_fb_init(struct drm_file *file_priv, struct drm_device *dev, goto out; } else { - exynos_gem_obj = exynos_drm_gem_create(file_priv, dev, - size, - &mode_cmd->handle); + exynos_gem_obj = exynos_drm_gem_create(dev, file_priv, + &mode_cmd->handle, + size); if (IS_ERR(exynos_gem_obj)) { ret = PTR_ERR(exynos_gem_obj); goto err_buffer; diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.c b/drivers/gpu/drm/exynos/exynos_drm_gem.c index a8e7a88..bd6ede8 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.c @@ -62,40 +62,28 @@ static unsigned int get_gem_mmap_offset(struct drm_gem_object *obj) return (unsigned int)obj->map_list.hash.key << PAGE_SHIFT; } -struct exynos_drm_gem_obj *exynos_drm_gem_create(struct drm_file *file_priv, - struct drm_device *dev, unsigned int size, - unsigned int *handle) +static struct exynos_drm_gem_obj + *exynos_drm_gem_init(struct drm_device *drm_dev, + struct drm_file *file_priv, unsigned int *handle, + unsigned int size) { struct exynos_drm_gem_obj *exynos_gem_obj; - struct exynos_drm_buf_entry *entry; struct drm_gem_object *obj; int ret; - DRM_DEBUG_KMS("%s\n", __FILE__); - - size = roundup(size, PAGE_SIZE); - exynos_gem_obj = kzalloc(sizeof(*exynos_gem_obj), GFP_KERNEL); if (!exynos_gem_obj) { DRM_ERROR("failed to allocate exynos gem object.\n"); return ERR_PTR(-ENOMEM); } - /* allocate the new buffer object and memory region. */ - entry = exynos_drm_buf_create(dev, size); - if (!entry) { - kfree(exynos_gem_obj); - return ERR_PTR(-ENOMEM); - } - - exynos_gem_obj->entry = entry; - obj = &exynos_gem_obj->base; - ret = drm_gem_object_init(dev, obj, size); + ret = drm_gem_object_init(drm_dev, obj, size); if (ret < 0) { - DRM_ERROR("failed to initailize gem object.\n"); - goto err_obj_init; + DRM_ERROR("failed to initialize gem object.\n"); + ret = -EINVAL; + goto err_object_init; } DRM_DEBUG_KMS("created file object = 0x%x\n", (unsigned int)obj->filp); @@ -127,24 +115,55 @@ err_handle_create: err_create_mmap_offset: drm_gem_object_release(obj); -err_obj_init: - exynos_drm_buf_destroy(dev, exynos_gem_obj->entry); - +err_object_init: kfree(exynos_gem_obj); return ERR_PTR(ret); } +struct exynos_drm_gem_obj *exynos_drm_gem_create(struct drm_device *dev, + struct drm_file *file_priv, + unsigned int *handle, unsigned long size) +{ + + struct exynos_drm_gem_obj *exynos_gem_obj = NULL; + struct exynos_drm_buf_entry *entry; + int ret; + + size = roundup(size, PAGE_SIZE); + + DRM_DEBUG_KMS("%s: size = 0x%lx\n", __FILE__, size); + + entry = exynos_drm_buf_create(dev, size); + if (!entry) + return ERR_PTR(-ENOMEM); + + exynos_gem_obj = exynos_drm_gem_init(dev, file_priv, handle, size); + if (IS_ERR(exynos_gem_obj)) { + ret = PTR_ERR(exynos_gem_obj); + goto err_gem_init; + } + + exynos_gem_obj->entry = entry; + + return exynos_gem_obj; + +err_gem_init: + exynos_drm_buf_destroy(dev, exynos_gem_obj->entry); + + return ERR_PTR(ret); +} + int exynos_drm_gem_create_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv) + struct drm_file *file_priv) { struct drm_exynos_gem_create *args = data; - struct exynos_drm_gem_obj *exynos_gem_obj; + struct exynos_drm_gem_obj *exynos_gem_obj = NULL; - DRM_DEBUG_KMS("%s : size = 0x%x\n", __FILE__, args->size); + DRM_DEBUG_KMS("%s\n", __FILE__); - exynos_gem_obj = exynos_drm_gem_create(file_priv, dev, args->size, - &args->handle); + exynos_gem_obj = exynos_drm_gem_create(dev, file_priv, + &args->handle, args->size); if (IS_ERR(exynos_gem_obj)) return PTR_ERR(exynos_gem_obj); @@ -302,8 +321,8 @@ int exynos_drm_gem_dumb_create(struct drm_file *file_priv, args->pitch = args->width * args->bpp >> 3; args->size = args->pitch * args->height; - exynos_gem_obj = exynos_drm_gem_create(file_priv, dev, args->size, - &args->handle); + exynos_gem_obj = exynos_drm_gem_create(dev, file_priv, &args->handle, + args->size); if (IS_ERR(exynos_gem_obj)) return PTR_ERR(exynos_gem_obj); diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.h b/drivers/gpu/drm/exynos/exynos_drm_gem.h index e5fc014..213838d 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.h +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.h @@ -49,9 +49,9 @@ struct exynos_drm_gem_obj { }; /* create a new buffer and get a new gem handle. */ -struct exynos_drm_gem_obj *exynos_drm_gem_create(struct drm_file *file_priv, - struct drm_device *dev, unsigned int size, - unsigned int *handle); +struct exynos_drm_gem_obj *exynos_drm_gem_create(struct drm_device *dev, + struct drm_file *file_priv, + unsigned int *handle, unsigned long size); /* * request gem object creation and buffer allocation as the size diff --git a/include/drm/exynos_drm.h b/include/drm/exynos_drm.h index 1d161cb..1205043 100644 --- a/include/drm/exynos_drm.h +++ b/include/drm/exynos_drm.h @@ -32,17 +32,16 @@ /** * User-desired buffer creation information structure. * - * @size: requested size for the object. + * @size: user-desired memory allocation size. * - this size value would be page-aligned internally. * @flags: user request for setting memory type or cache attributes. - * @handle: returned handle for the object. - * @pad: just padding to be 64-bit aligned. + * @handle: returned a handle to created gem object. + * - this handle will be set by gem module of kernel side. */ struct drm_exynos_gem_create { - unsigned int size; + uint64_t size; unsigned int flags; unsigned int handle; - unsigned int pad; }; /** -- cgit v0.10.2 From c7493668eeced636afabfed57dfead8329c3d7fa Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Wed, 9 Nov 2011 16:50:30 +0900 Subject: drm/exynos: removed unnecessary variable. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_buf.c b/drivers/gpu/drm/exynos/exynos_drm_buf.c index 6f8afea..303189c 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_buf.c +++ b/drivers/gpu/drm/exynos/exynos_drm_buf.c @@ -29,8 +29,6 @@ #include "exynos_drm_drv.h" #include "exynos_drm_buf.h" -static DEFINE_MUTEX(exynos_drm_buf_lock); - static int lowlevel_buffer_allocate(struct drm_device *dev, struct exynos_drm_buf_entry *entry) { -- cgit v0.10.2 From 2c871127e994a678b82104a4110eb7fcc87f05ad Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Sat, 12 Nov 2011 15:23:32 +0900 Subject: drm/exynos: changed buffer structure. the purpose of this patch is to consider IOMMU support in the future. EXYNOS4 SoC supports IOMMU also so the address for DMA could be physical address with IOMMU or device address with IOMMU. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_buf.c b/drivers/gpu/drm/exynos/exynos_drm_buf.c index 303189c..2bb07bc 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_buf.c +++ b/drivers/gpu/drm/exynos/exynos_drm_buf.c @@ -27,80 +27,84 @@ #include "drm.h" #include "exynos_drm_drv.h" +#include "exynos_drm_gem.h" #include "exynos_drm_buf.h" static int lowlevel_buffer_allocate(struct drm_device *dev, - struct exynos_drm_buf_entry *entry) + struct exynos_drm_gem_buf *buffer) { DRM_DEBUG_KMS("%s\n", __FILE__); - entry->vaddr = dma_alloc_writecombine(dev->dev, entry->size, - (dma_addr_t *)&entry->paddr, GFP_KERNEL); - if (!entry->paddr) { + buffer->kvaddr = dma_alloc_writecombine(dev->dev, buffer->size, + &buffer->dma_addr, GFP_KERNEL); + if (!buffer->kvaddr) { DRM_ERROR("failed to allocate buffer.\n"); return -ENOMEM; } - DRM_DEBUG_KMS("allocated : vaddr(0x%x), paddr(0x%x), size(0x%x)\n", - (unsigned int)entry->vaddr, entry->paddr, entry->size); + DRM_DEBUG_KMS("vaddr(0x%lx), dma_addr(0x%lx), size(0x%lx)\n", + (unsigned long)buffer->kvaddr, + (unsigned long)buffer->dma_addr, + buffer->size); return 0; } static void lowlevel_buffer_deallocate(struct drm_device *dev, - struct exynos_drm_buf_entry *entry) + struct exynos_drm_gem_buf *buffer) { DRM_DEBUG_KMS("%s.\n", __FILE__); - if (entry->paddr && entry->vaddr && entry->size) - dma_free_writecombine(dev->dev, entry->size, entry->vaddr, - entry->paddr); + if (buffer->dma_addr && buffer->size) + dma_free_writecombine(dev->dev, buffer->size, buffer->kvaddr, + (dma_addr_t)buffer->dma_addr); else - DRM_DEBUG_KMS("entry data is null.\n"); + DRM_DEBUG_KMS("buffer data are invalid.\n"); } -struct exynos_drm_buf_entry *exynos_drm_buf_create(struct drm_device *dev, +struct exynos_drm_gem_buf *exynos_drm_buf_create(struct drm_device *dev, unsigned int size) { - struct exynos_drm_buf_entry *entry; + struct exynos_drm_gem_buf *buffer; DRM_DEBUG_KMS("%s.\n", __FILE__); + DRM_DEBUG_KMS("desired size = 0x%x\n", size); - entry = kzalloc(sizeof(*entry), GFP_KERNEL); - if (!entry) { - DRM_ERROR("failed to allocate exynos_drm_buf_entry.\n"); + buffer = kzalloc(sizeof(*buffer), GFP_KERNEL); + if (!buffer) { + DRM_ERROR("failed to allocate exynos_drm_gem_buf.\n"); return ERR_PTR(-ENOMEM); } - entry->size = size; + buffer->size = size; /* * allocate memory region with size and set the memory information - * to vaddr and paddr of a entry object. + * to vaddr and dma_addr of a buffer object. */ - if (lowlevel_buffer_allocate(dev, entry) < 0) { - kfree(entry); - entry = NULL; + if (lowlevel_buffer_allocate(dev, buffer) < 0) { + kfree(buffer); + buffer = NULL; return ERR_PTR(-ENOMEM); } - return entry; + return buffer; } void exynos_drm_buf_destroy(struct drm_device *dev, - struct exynos_drm_buf_entry *entry) + struct exynos_drm_gem_buf *buffer) { DRM_DEBUG_KMS("%s.\n", __FILE__); - if (!entry) { - DRM_DEBUG_KMS("entry is null.\n"); + if (!buffer) { + DRM_DEBUG_KMS("buffer is null.\n"); return; } - lowlevel_buffer_deallocate(dev, entry); + lowlevel_buffer_deallocate(dev, buffer); - kfree(entry); - entry = NULL; + kfree(buffer); + buffer = NULL; } MODULE_AUTHOR("Inki Dae "); diff --git a/drivers/gpu/drm/exynos/exynos_drm_buf.h b/drivers/gpu/drm/exynos/exynos_drm_buf.h index 045d59e..6e91f9c 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_buf.h +++ b/drivers/gpu/drm/exynos/exynos_drm_buf.h @@ -26,28 +26,15 @@ #ifndef _EXYNOS_DRM_BUF_H_ #define _EXYNOS_DRM_BUF_H_ -/* - * exynos drm buffer entry structure. - * - * @paddr: physical address of allocated memory. - * @vaddr: kernel virtual address of allocated memory. - * @size: size of allocated memory. - */ -struct exynos_drm_buf_entry { - dma_addr_t paddr; - void __iomem *vaddr; - unsigned int size; -}; - /* allocate physical memory. */ -struct exynos_drm_buf_entry *exynos_drm_buf_create(struct drm_device *dev, +struct exynos_drm_gem_buf *exynos_drm_buf_create(struct drm_device *dev, unsigned int size); -/* get physical memory information of a drm framebuffer. */ -struct exynos_drm_buf_entry *exynos_drm_fb_get_buf(struct drm_framebuffer *fb); +/* get memory information of a drm framebuffer. */ +struct exynos_drm_gem_buf *exynos_drm_fb_get_buf(struct drm_framebuffer *fb); /* remove allocated physical memory. */ void exynos_drm_buf_destroy(struct drm_device *dev, - struct exynos_drm_buf_entry *entry); + struct exynos_drm_gem_buf *buffer); #endif diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c index b1d6526..ee43cc2 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c @@ -29,36 +29,17 @@ #include "drmP.h" #include "drm_crtc_helper.h" +#include "exynos_drm_crtc.h" #include "exynos_drm_drv.h" #include "exynos_drm_fb.h" #include "exynos_drm_encoder.h" +#include "exynos_drm_gem.h" #include "exynos_drm_buf.h" #define to_exynos_crtc(x) container_of(x, struct exynos_drm_crtc,\ drm_crtc) /* - * Exynos specific crtc postion structure. - * - * @fb_x: offset x on a framebuffer to be displyed - * - the unit is screen coordinates. - * @fb_y: offset y on a framebuffer to be displayed - * - the unit is screen coordinates. - * @crtc_x: offset x on hardware screen. - * @crtc_y: offset y on hardware screen. - * @crtc_w: width of hardware screen. - * @crtc_h: height of hardware screen. - */ -struct exynos_drm_crtc_pos { - unsigned int fb_x; - unsigned int fb_y; - unsigned int crtc_x; - unsigned int crtc_y; - unsigned int crtc_w; - unsigned int crtc_h; -}; - -/* * Exynos specific crtc structure. * * @drm_crtc: crtc object. @@ -89,27 +70,27 @@ static void exynos_drm_crtc_apply(struct drm_crtc *crtc) exynos_drm_encoder_crtc_commit); } -static int exynos_drm_overlay_update(struct exynos_drm_overlay *overlay, - struct drm_framebuffer *fb, - struct drm_display_mode *mode, - struct exynos_drm_crtc_pos *pos) +int exynos_drm_overlay_update(struct exynos_drm_overlay *overlay, + struct drm_framebuffer *fb, + struct drm_display_mode *mode, + struct exynos_drm_crtc_pos *pos) { - struct exynos_drm_buf_entry *entry; + struct exynos_drm_gem_buf *buffer; unsigned int actual_w; unsigned int actual_h; - entry = exynos_drm_fb_get_buf(fb); - if (!entry) { - DRM_LOG_KMS("entry is null.\n"); + buffer = exynos_drm_fb_get_buf(fb); + if (!buffer) { + DRM_LOG_KMS("buffer is null.\n"); return -EFAULT; } - overlay->paddr = entry->paddr; - overlay->vaddr = entry->vaddr; + overlay->dma_addr = buffer->dma_addr; + overlay->vaddr = buffer->kvaddr; - DRM_DEBUG_KMS("vaddr = 0x%lx, paddr = 0x%lx\n", + DRM_DEBUG_KMS("vaddr = 0x%lx, dma_addr = 0x%lx\n", (unsigned long)overlay->vaddr, - (unsigned long)overlay->paddr); + (unsigned long)overlay->dma_addr); actual_w = min((mode->hdisplay - pos->crtc_x), pos->crtc_w); actual_h = min((mode->vdisplay - pos->crtc_y), pos->crtc_h); diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.h b/drivers/gpu/drm/exynos/exynos_drm_crtc.h index c584042..25f72a6 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.h +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.h @@ -35,4 +35,29 @@ int exynos_drm_crtc_create(struct drm_device *dev, unsigned int nr); int exynos_drm_crtc_enable_vblank(struct drm_device *dev, int crtc); void exynos_drm_crtc_disable_vblank(struct drm_device *dev, int crtc); +/* + * Exynos specific crtc postion structure. + * + * @fb_x: offset x on a framebuffer to be displyed + * - the unit is screen coordinates. + * @fb_y: offset y on a framebuffer to be displayed + * - the unit is screen coordinates. + * @crtc_x: offset x on hardware screen. + * @crtc_y: offset y on hardware screen. + * @crtc_w: width of hardware screen. + * @crtc_h: height of hardware screen. + */ +struct exynos_drm_crtc_pos { + unsigned int fb_x; + unsigned int fb_y; + unsigned int crtc_x; + unsigned int crtc_y; + unsigned int crtc_w; + unsigned int crtc_h; +}; + +int exynos_drm_overlay_update(struct exynos_drm_overlay *overlay, + struct drm_framebuffer *fb, + struct drm_display_mode *mode, + struct exynos_drm_crtc_pos *pos); #endif diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h index 1575e5f..38a6f1d 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h @@ -79,8 +79,8 @@ struct exynos_drm_overlay_ops { * @scan_flag: interlace or progressive way. * (it could be DRM_MODE_FLAG_*) * @bpp: pixel size.(in bit) - * @paddr: bus(accessed by dma) physical memory address to this overlay - * and this is physically continuous. + * @dma_addr: bus(accessed by dma) address to the memory region allocated + * for a overlay. * @vaddr: virtual memory addresss to this overlay. * @default_win: a window to be enabled. * @color_key: color key on or off. @@ -108,7 +108,7 @@ struct exynos_drm_overlay { unsigned int scan_flag; unsigned int bpp; unsigned int pitch; - dma_addr_t paddr; + dma_addr_t dma_addr; void __iomem *vaddr; bool default_win; diff --git a/drivers/gpu/drm/exynos/exynos_drm_fb.c b/drivers/gpu/drm/exynos/exynos_drm_fb.c index 8d0f662..5bf4a1a 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fb.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fb.c @@ -43,14 +43,14 @@ * * @fb: drm framebuffer obejct. * @exynos_gem_obj: exynos specific gem object containing a gem object. - * @entry: pointer to exynos drm buffer entry object. - * - containing only the information to physically continuous memory - * region allocated at default framebuffer creation. + * @buffer: pointer to exynos_drm_gem_buffer object. + * - contain the memory information to memory region allocated + * at default framebuffer creation. */ struct exynos_drm_fb { struct drm_framebuffer fb; struct exynos_drm_gem_obj *exynos_gem_obj; - struct exynos_drm_buf_entry *entry; + struct exynos_drm_gem_buf *buffer; }; static void exynos_drm_fb_destroy(struct drm_framebuffer *fb) @@ -65,8 +65,8 @@ static void exynos_drm_fb_destroy(struct drm_framebuffer *fb) * default framebuffer has no gem object so * a buffer of the default framebuffer should be released at here. */ - if (!exynos_fb->exynos_gem_obj && exynos_fb->entry) - exynos_drm_buf_destroy(fb->dev, exynos_fb->entry); + if (!exynos_fb->exynos_gem_obj && exynos_fb->buffer) + exynos_drm_buf_destroy(fb->dev, exynos_fb->buffer); kfree(exynos_fb); exynos_fb = NULL; @@ -145,23 +145,23 @@ exynos_drm_fb_init(struct drm_file *file_priv, struct drm_device *dev, */ if (!mode_cmd->handle) { if (!file_priv) { - struct exynos_drm_buf_entry *entry; + struct exynos_drm_gem_buf *buffer; /* * in case that file_priv is NULL, it allocates * only buffer and this buffer would be used * for default framebuffer. */ - entry = exynos_drm_buf_create(dev, size); - if (IS_ERR(entry)) { - ret = PTR_ERR(entry); + buffer = exynos_drm_buf_create(dev, size); + if (IS_ERR(buffer)) { + ret = PTR_ERR(buffer); goto err_buffer; } - exynos_fb->entry = entry; + exynos_fb->buffer = buffer; - DRM_LOG_KMS("default fb: paddr = 0x%lx, size = 0x%x\n", - (unsigned long)entry->paddr, size); + DRM_LOG_KMS("default: dma_addr = 0x%lx, size = 0x%x\n", + (unsigned long)buffer->dma_addr, size); goto out; } else { @@ -191,10 +191,10 @@ exynos_drm_fb_init(struct drm_file *file_priv, struct drm_device *dev, * so that default framebuffer has no its own gem object, * only its own buffer object. */ - exynos_fb->entry = exynos_gem_obj->entry; + exynos_fb->buffer = exynos_gem_obj->buffer; - DRM_LOG_KMS("paddr = 0x%lx, size = 0x%x, gem object = 0x%x\n", - (unsigned long)exynos_fb->entry->paddr, size, + DRM_LOG_KMS("dma_addr = 0x%lx, size = 0x%x, gem object = 0x%x\n", + (unsigned long)exynos_fb->buffer->dma_addr, size, (unsigned int)&exynos_gem_obj->base); out: @@ -222,22 +222,22 @@ struct drm_framebuffer *exynos_drm_fb_create(struct drm_device *dev, return exynos_drm_fb_init(file_priv, dev, mode_cmd); } -struct exynos_drm_buf_entry *exynos_drm_fb_get_buf(struct drm_framebuffer *fb) +struct exynos_drm_gem_buf *exynos_drm_fb_get_buf(struct drm_framebuffer *fb) { struct exynos_drm_fb *exynos_fb = to_exynos_fb(fb); - struct exynos_drm_buf_entry *entry; + struct exynos_drm_gem_buf *buffer; DRM_DEBUG_KMS("%s\n", __FILE__); - entry = exynos_fb->entry; - if (!entry) + buffer = exynos_fb->buffer; + if (!buffer) return NULL; - DRM_DEBUG_KMS("vaddr = 0x%lx, paddr = 0x%lx\n", - (unsigned long)entry->vaddr, - (unsigned long)entry->paddr); + DRM_DEBUG_KMS("vaddr = 0x%lx, dma_addr = 0x%lx\n", + (unsigned long)buffer->kvaddr, + (unsigned long)buffer->dma_addr); - return entry; + return buffer; } static void exynos_drm_output_poll_changed(struct drm_device *dev) diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c index 0effd77..836f4100 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c @@ -33,6 +33,7 @@ #include "exynos_drm_drv.h" #include "exynos_drm_fb.h" +#include "exynos_drm_gem.h" #include "exynos_drm_buf.h" #define MAX_CONNECTOR 4 @@ -90,7 +91,7 @@ static int exynos_drm_fbdev_update(struct drm_fb_helper *helper, struct fb_info *fbi = helper->fbdev; struct drm_device *dev = helper->dev; struct exynos_drm_fbdev *exynos_fb = to_exynos_fbdev(helper); - struct exynos_drm_buf_entry *entry; + struct exynos_drm_gem_buf *buffer; unsigned int size = fb->width * fb->height * (fb->bits_per_pixel >> 3); unsigned long offset; @@ -101,18 +102,18 @@ static int exynos_drm_fbdev_update(struct drm_fb_helper *helper, drm_fb_helper_fill_fix(fbi, fb->pitch, fb->depth); drm_fb_helper_fill_var(fbi, helper, fb->width, fb->height); - entry = exynos_drm_fb_get_buf(fb); - if (!entry) { - DRM_LOG_KMS("entry is null.\n"); + buffer = exynos_drm_fb_get_buf(fb); + if (!buffer) { + DRM_LOG_KMS("buffer is null.\n"); return -EFAULT; } offset = fbi->var.xoffset * (fb->bits_per_pixel >> 3); offset += fbi->var.yoffset * fb->pitch; - dev->mode_config.fb_base = entry->paddr; - fbi->screen_base = entry->vaddr + offset; - fbi->fix.smem_start = entry->paddr + offset; + dev->mode_config.fb_base = (resource_size_t)buffer->dma_addr; + fbi->screen_base = buffer->kvaddr + offset; + fbi->fix.smem_start = (unsigned long)(buffer->dma_addr + offset); fbi->screen_size = size; fbi->fix.smem_len = size; diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index f2d883f..f5c8b07 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -64,7 +64,7 @@ struct fimd_win_data { unsigned int fb_width; unsigned int fb_height; unsigned int bpp; - dma_addr_t paddr; + dma_addr_t dma_addr; void __iomem *vaddr; unsigned int buf_offsize; unsigned int line_size; /* bytes */ @@ -251,7 +251,7 @@ static void fimd_win_mode_set(struct device *dev, win_data->ovl_height = overlay->crtc_height; win_data->fb_width = overlay->fb_width; win_data->fb_height = overlay->fb_height; - win_data->paddr = overlay->paddr + offset; + win_data->dma_addr = overlay->dma_addr + offset; win_data->vaddr = overlay->vaddr + offset; win_data->bpp = overlay->bpp; win_data->buf_offsize = (overlay->fb_width - overlay->crtc_width) * @@ -263,7 +263,7 @@ static void fimd_win_mode_set(struct device *dev, DRM_DEBUG_KMS("ovl_width = %d, ovl_height = %d\n", win_data->ovl_width, win_data->ovl_height); DRM_DEBUG_KMS("paddr = 0x%lx, vaddr = 0x%lx\n", - (unsigned long)win_data->paddr, + (unsigned long)win_data->dma_addr, (unsigned long)win_data->vaddr); DRM_DEBUG_KMS("fb_width = %d, crtc_width = %d\n", overlay->fb_width, overlay->crtc_width); @@ -376,16 +376,16 @@ static void fimd_win_commit(struct device *dev) writel(val, ctx->regs + SHADOWCON); /* buffer start address */ - val = win_data->paddr; + val = (unsigned long)win_data->dma_addr; writel(val, ctx->regs + VIDWx_BUF_START(win, 0)); /* buffer end address */ size = win_data->fb_width * win_data->ovl_height * (win_data->bpp >> 3); - val = win_data->paddr + size; + val = (unsigned long)(win_data->dma_addr + size); writel(val, ctx->regs + VIDWx_BUF_END(win, 0)); DRM_DEBUG_KMS("start addr = 0x%lx, end addr = 0x%lx, size = 0x%lx\n", - (unsigned long)win_data->paddr, val, size); + (unsigned long)win_data->dma_addr, val, size); DRM_DEBUG_KMS("ovl_width = %d, ovl_height = %d\n", win_data->ovl_width, win_data->ovl_height); diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.c b/drivers/gpu/drm/exynos/exynos_drm_gem.c index bd6ede8..b1b94b1 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.c @@ -127,15 +127,15 @@ struct exynos_drm_gem_obj *exynos_drm_gem_create(struct drm_device *dev, { struct exynos_drm_gem_obj *exynos_gem_obj = NULL; - struct exynos_drm_buf_entry *entry; + struct exynos_drm_gem_buf *buffer; int ret; size = roundup(size, PAGE_SIZE); DRM_DEBUG_KMS("%s: size = 0x%lx\n", __FILE__, size); - entry = exynos_drm_buf_create(dev, size); - if (!entry) + buffer = exynos_drm_buf_create(dev, size); + if (!buffer) return ERR_PTR(-ENOMEM); exynos_gem_obj = exynos_drm_gem_init(dev, file_priv, handle, size); @@ -144,12 +144,12 @@ struct exynos_drm_gem_obj *exynos_drm_gem_create(struct drm_device *dev, goto err_gem_init; } - exynos_gem_obj->entry = entry; + exynos_gem_obj->buffer = buffer; return exynos_gem_obj; err_gem_init: - exynos_drm_buf_destroy(dev, exynos_gem_obj->entry); + exynos_drm_buf_destroy(dev, exynos_gem_obj->buffer); return ERR_PTR(ret); } @@ -194,7 +194,7 @@ static int exynos_drm_gem_mmap_buffer(struct file *filp, { struct drm_gem_object *obj = filp->private_data; struct exynos_drm_gem_obj *exynos_gem_obj = to_exynos_gem_obj(obj); - struct exynos_drm_buf_entry *entry; + struct exynos_drm_gem_buf *buffer; unsigned long pfn, vm_size; DRM_DEBUG_KMS("%s\n", __FILE__); @@ -206,20 +206,20 @@ static int exynos_drm_gem_mmap_buffer(struct file *filp, vm_size = vma->vm_end - vma->vm_start; /* - * a entry contains information to physically continuous memory + * a buffer contains information to physically continuous memory * allocated by user request or at framebuffer creation. */ - entry = exynos_gem_obj->entry; + buffer = exynos_gem_obj->buffer; /* check if user-requested size is valid. */ - if (vm_size > entry->size) + if (vm_size > buffer->size) return -EINVAL; /* * get page frame number to physical memory to be mapped * to user space. */ - pfn = exynos_gem_obj->entry->paddr >> PAGE_SHIFT; + pfn = ((unsigned long)exynos_gem_obj->buffer->dma_addr) >> PAGE_SHIFT; DRM_DEBUG_KMS("pfn = 0x%lx\n", pfn); @@ -300,7 +300,7 @@ void exynos_drm_gem_free_object(struct drm_gem_object *gem_obj) exynos_gem_obj = to_exynos_gem_obj(gem_obj); - exynos_drm_buf_destroy(gem_obj->dev, exynos_gem_obj->entry); + exynos_drm_buf_destroy(gem_obj->dev, exynos_gem_obj->buffer); kfree(exynos_gem_obj); } @@ -379,7 +379,8 @@ int exynos_drm_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) mutex_lock(&dev->struct_mutex); - pfn = (exynos_gem_obj->entry->paddr >> PAGE_SHIFT) + page_offset; + pfn = (((unsigned long)exynos_gem_obj->buffer->dma_addr) >> + PAGE_SHIFT) + page_offset; ret = vm_insert_mixed(vma, (unsigned long)vmf->virtual_address, pfn); diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.h b/drivers/gpu/drm/exynos/exynos_drm_gem.h index 213838d..ef87973 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.h +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.h @@ -30,13 +30,29 @@ struct exynos_drm_gem_obj, base) /* + * exynos drm gem buffer structure. + * + * @kvaddr: kernel virtual address to allocated memory region. + * @dma_addr: bus address(accessed by dma) to allocated memory region. + * - this address could be physical address without IOMMU and + * device address with IOMMU. + * @size: size of allocated memory region. + */ +struct exynos_drm_gem_buf { + void __iomem *kvaddr; + dma_addr_t dma_addr; + unsigned long size; +}; + +/* * exynos drm buffer structure. * * @base: a gem object. * - a new handle to this gem object would be created * by drm_gem_handle_create(). - * @entry: pointer to exynos drm buffer entry object. - * - containing the information to physically + * @buffer: a pointer to exynos_drm_gem_buffer object. + * - contain the information to memory region allocated + * by user request or at framebuffer creation. * continuous memory region allocated by user request * or at framebuffer creation. * @@ -45,7 +61,7 @@ */ struct exynos_drm_gem_obj { struct drm_gem_object base; - struct exynos_drm_buf_entry *entry; + struct exynos_drm_gem_buf *buffer; }; /* create a new buffer and get a new gem handle. */ -- cgit v0.10.2 From 483b88f86e1682241bfa0848e348aa175257c6e7 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Fri, 11 Nov 2011 21:28:00 +0900 Subject: drm/exynos: fix vblank bug. In case that vblank_disable_allowed is 1, the problem that manager->pipe could be -1 at vsync interrupt handler could be induced so this patch fixes that. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index f5c8b07..272c3b5 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -447,7 +447,9 @@ static void fimd_win_commit(struct device *dev) static void fimd_win_disable(struct device *dev) { struct fimd_context *ctx = get_fimd_context(dev); - struct fimd_win_data *win_data; + struct exynos_drm_subdrv *subdrv = &ctx->subdrv; + struct drm_device *drm_dev = subdrv->drm_dev; + struct exynos_drm_manager *manager = &subdrv->manager; int win = ctx->default_win; u32 val; @@ -456,8 +458,6 @@ static void fimd_win_disable(struct device *dev) if (win < 0 || win > WINDOWS_NR) return; - win_data = &ctx->win_data[win]; - /* protect windows */ val = readl(ctx->regs + SHADOWCON); val |= SHADOWCON_WINx_PROTECT(win); @@ -473,6 +473,29 @@ static void fimd_win_disable(struct device *dev) val &= ~SHADOWCON_CHx_ENABLE(win); val &= ~SHADOWCON_WINx_PROTECT(win); writel(val, ctx->regs + SHADOWCON); + + /* fimd dma off. */ + val = readl(ctx->regs + VIDCON0); + val &= ~(VIDCON0_ENVID | VIDCON0_ENVID_F); + writel(val, ctx->regs + VIDCON0); + + /* + * if vblank is enabled status with dma off then + * it disables vsync interrupt. + */ + if (drm_dev->vblank_enabled[manager->pipe] && + atomic_read(&drm_dev->vblank_refcount[manager->pipe])) { + drm_vblank_put(drm_dev, manager->pipe); + + /* + * if vblank_disable_allowed is 0 then disable vsync interrupt + * right now else the vsync interrupt would be disabled by drm + * timer once a current process gives up ownershop of + * vblank event. + */ + if (!drm_dev->vblank_disable_allowed) + drm_vblank_off(drm_dev, manager->pipe); + } } static struct exynos_drm_overlay_ops fimd_overlay_ops = { @@ -528,6 +551,16 @@ static irqreturn_t fimd_irq_handler(int irq, void *dev_id) /* VSYNC interrupt */ writel(VIDINTCON1_INT_FRAME, ctx->regs + VIDINTCON1); + /* + * in case that vblank_disable_allowed is 1, it could induce + * the problem that manager->pipe could be -1 because with + * disable callback, vsync interrupt isn't disabled and at this moment, + * vsync interrupt could occur. the vsync interrupt would be disabled + * by timer handler later. + */ + if (manager->pipe == -1) + return IRQ_HANDLED; + drm_handle_vblank(drm_dev, manager->pipe); fimd_finish_pageflip(drm_dev, manager->pipe); @@ -548,13 +581,6 @@ static int fimd_subdrv_probe(struct drm_device *drm_dev, struct device *dev) */ drm_dev->irq_enabled = 1; - /* - * with vblank_disable_allowed = 1, vblank interrupt will be disabled - * by drm timer once a current process gives up ownership of - * vblank event.(drm_vblank_put function was called) - */ - drm_dev->vblank_disable_allowed = 1; - return 0; } -- cgit v0.10.2 From 4f9eb94f7be3d357e811ec74a53027bd27f1748f Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Sat, 12 Nov 2011 16:57:42 +0900 Subject: drm/exynos: include linux/module.h Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h index 38a6f1d..2d74f85 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h @@ -29,6 +29,7 @@ #ifndef _EXYNOS_DRM_DRV_H_ #define _EXYNOS_DRM_DRV_H_ +#include #include "drm.h" #define MAX_CRTC 2 -- cgit v0.10.2 From 943ef2ec4f5f14940ea391d25bf93eb99eb2ff2a Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Tue, 15 Nov 2011 11:45:16 +0100 Subject: watchdog: adx_wdt.c: remove driver Remove the driver (that was added in v2.6.32) since the architecture has never been merged into mainline. Reported-by: Paul Bolle Acked-by: Thierry Reding Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 6285867..79fd606 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -314,13 +314,6 @@ config NUC900_WATCHDOG To compile this driver as a module, choose M here: the module will be called nuc900_wdt. -config ADX_WATCHDOG - tristate "Avionic Design Xanthos watchdog" - depends on ARCH_PXA_ADX - help - Say Y here if you want support for the watchdog timer on Avionic - Design Xanthos boards. - config TS72XX_WATCHDOG tristate "TS-72XX SBC Watchdog" depends on MACH_TS72XX diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 55bd574..fe893e9 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -51,7 +51,6 @@ obj-$(CONFIG_ORION_WATCHDOG) += orion_wdt.o obj-$(CONFIG_COH901327_WATCHDOG) += coh901327_wdt.o obj-$(CONFIG_STMP3XXX_WATCHDOG) += stmp3xxx_wdt.o obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o -obj-$(CONFIG_ADX_WATCHDOG) += adx_wdt.o obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o diff --git a/drivers/watchdog/adx_wdt.c b/drivers/watchdog/adx_wdt.c deleted file mode 100644 index af6e6b1..0000000 --- a/drivers/watchdog/adx_wdt.c +++ /dev/null @@ -1,355 +0,0 @@ -/* - * Copyright (C) 2008-2009 Avionic Design GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define WATCHDOG_NAME "adx-wdt" - -/* register offsets */ -#define ADX_WDT_CONTROL 0x00 -#define ADX_WDT_CONTROL_ENABLE (1 << 0) -#define ADX_WDT_CONTROL_nRESET (1 << 1) -#define ADX_WDT_TIMEOUT 0x08 - -static struct platform_device *adx_wdt_dev; -static unsigned long driver_open; - -#define WDT_STATE_STOP 0 -#define WDT_STATE_START 1 - -struct adx_wdt { - void __iomem *base; - unsigned long timeout; - unsigned int state; - unsigned int wake; - spinlock_t lock; -}; - -static const struct watchdog_info adx_wdt_info = { - .identity = "Avionic Design Xanthos Watchdog", - .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, -}; - -static void adx_wdt_start_locked(struct adx_wdt *wdt) -{ - u32 ctrl; - - ctrl = readl(wdt->base + ADX_WDT_CONTROL); - ctrl |= ADX_WDT_CONTROL_ENABLE; - writel(ctrl, wdt->base + ADX_WDT_CONTROL); - wdt->state = WDT_STATE_START; -} - -static void adx_wdt_start(struct adx_wdt *wdt) -{ - unsigned long flags; - - spin_lock_irqsave(&wdt->lock, flags); - adx_wdt_start_locked(wdt); - spin_unlock_irqrestore(&wdt->lock, flags); -} - -static void adx_wdt_stop_locked(struct adx_wdt *wdt) -{ - u32 ctrl; - - ctrl = readl(wdt->base + ADX_WDT_CONTROL); - ctrl &= ~ADX_WDT_CONTROL_ENABLE; - writel(ctrl, wdt->base + ADX_WDT_CONTROL); - wdt->state = WDT_STATE_STOP; -} - -static void adx_wdt_stop(struct adx_wdt *wdt) -{ - unsigned long flags; - - spin_lock_irqsave(&wdt->lock, flags); - adx_wdt_stop_locked(wdt); - spin_unlock_irqrestore(&wdt->lock, flags); -} - -static void adx_wdt_set_timeout(struct adx_wdt *wdt, unsigned long seconds) -{ - unsigned long timeout = seconds * 1000; - unsigned long flags; - unsigned int state; - - spin_lock_irqsave(&wdt->lock, flags); - state = wdt->state; - adx_wdt_stop_locked(wdt); - writel(timeout, wdt->base + ADX_WDT_TIMEOUT); - - if (state == WDT_STATE_START) - adx_wdt_start_locked(wdt); - - wdt->timeout = timeout; - spin_unlock_irqrestore(&wdt->lock, flags); -} - -static void adx_wdt_get_timeout(struct adx_wdt *wdt, unsigned long *seconds) -{ - *seconds = wdt->timeout / 1000; -} - -static void adx_wdt_keepalive(struct adx_wdt *wdt) -{ - unsigned long flags; - - spin_lock_irqsave(&wdt->lock, flags); - writel(wdt->timeout, wdt->base + ADX_WDT_TIMEOUT); - spin_unlock_irqrestore(&wdt->lock, flags); -} - -static int adx_wdt_open(struct inode *inode, struct file *file) -{ - struct adx_wdt *wdt = platform_get_drvdata(adx_wdt_dev); - - if (test_and_set_bit(0, &driver_open)) - return -EBUSY; - - file->private_data = wdt; - adx_wdt_set_timeout(wdt, 30); - adx_wdt_start(wdt); - - return nonseekable_open(inode, file); -} - -static int adx_wdt_release(struct inode *inode, struct file *file) -{ - struct adx_wdt *wdt = file->private_data; - - adx_wdt_stop(wdt); - clear_bit(0, &driver_open); - - return 0; -} - -static long adx_wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -{ - struct adx_wdt *wdt = file->private_data; - void __user *argp = (void __user *)arg; - unsigned long __user *p = argp; - unsigned long seconds = 0; - unsigned int options; - long ret = -EINVAL; - - switch (cmd) { - case WDIOC_GETSUPPORT: - if (copy_to_user(argp, &adx_wdt_info, sizeof(adx_wdt_info))) - return -EFAULT; - else - return 0; - - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - - case WDIOC_KEEPALIVE: - adx_wdt_keepalive(wdt); - return 0; - - case WDIOC_SETTIMEOUT: - if (get_user(seconds, p)) - return -EFAULT; - - adx_wdt_set_timeout(wdt, seconds); - - /* fallthrough */ - case WDIOC_GETTIMEOUT: - adx_wdt_get_timeout(wdt, &seconds); - return put_user(seconds, p); - - case WDIOC_SETOPTIONS: - if (copy_from_user(&options, argp, sizeof(options))) - return -EFAULT; - - if (options & WDIOS_DISABLECARD) { - adx_wdt_stop(wdt); - ret = 0; - } - - if (options & WDIOS_ENABLECARD) { - adx_wdt_start(wdt); - ret = 0; - } - - return ret; - - default: - break; - } - - return -ENOTTY; -} - -static ssize_t adx_wdt_write(struct file *file, const char __user *data, - size_t len, loff_t *ppos) -{ - struct adx_wdt *wdt = file->private_data; - - if (len) - adx_wdt_keepalive(wdt); - - return len; -} - -static const struct file_operations adx_wdt_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .open = adx_wdt_open, - .release = adx_wdt_release, - .unlocked_ioctl = adx_wdt_ioctl, - .write = adx_wdt_write, -}; - -static struct miscdevice adx_wdt_miscdev = { - .minor = WATCHDOG_MINOR, - .name = "watchdog", - .fops = &adx_wdt_fops, -}; - -static int __devinit adx_wdt_probe(struct platform_device *pdev) -{ - struct resource *res; - struct adx_wdt *wdt; - int ret = 0; - u32 ctrl; - - wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); - if (!wdt) { - dev_err(&pdev->dev, "cannot allocate WDT structure\n"); - return -ENOMEM; - } - - spin_lock_init(&wdt->lock); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "cannot obtain I/O memory region\n"); - return -ENXIO; - } - - res = devm_request_mem_region(&pdev->dev, res->start, - resource_size(res), res->name); - if (!res) { - dev_err(&pdev->dev, "cannot request I/O memory region\n"); - return -ENXIO; - } - - wdt->base = devm_ioremap_nocache(&pdev->dev, res->start, - resource_size(res)); - if (!wdt->base) { - dev_err(&pdev->dev, "cannot remap I/O memory region\n"); - return -ENXIO; - } - - /* disable watchdog and reboot on timeout */ - ctrl = readl(wdt->base + ADX_WDT_CONTROL); - ctrl &= ~ADX_WDT_CONTROL_ENABLE; - ctrl &= ~ADX_WDT_CONTROL_nRESET; - writel(ctrl, wdt->base + ADX_WDT_CONTROL); - - platform_set_drvdata(pdev, wdt); - adx_wdt_dev = pdev; - - ret = misc_register(&adx_wdt_miscdev); - if (ret) { - dev_err(&pdev->dev, "cannot register miscdev on minor %d " - "(err=%d)\n", WATCHDOG_MINOR, ret); - return ret; - } - - return 0; -} - -static int __devexit adx_wdt_remove(struct platform_device *pdev) -{ - struct adx_wdt *wdt = platform_get_drvdata(pdev); - - misc_deregister(&adx_wdt_miscdev); - adx_wdt_stop(wdt); - platform_set_drvdata(pdev, NULL); - - return 0; -} - -static void adx_wdt_shutdown(struct platform_device *pdev) -{ - struct adx_wdt *wdt = platform_get_drvdata(pdev); - adx_wdt_stop(wdt); -} - -#ifdef CONFIG_PM -static int adx_wdt_suspend(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct adx_wdt *wdt = platform_get_drvdata(pdev); - - wdt->wake = (wdt->state == WDT_STATE_START) ? 1 : 0; - adx_wdt_stop(wdt); - - return 0; -} - -static int adx_wdt_resume(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct adx_wdt *wdt = platform_get_drvdata(pdev); - - if (wdt->wake) - adx_wdt_start(wdt); - - return 0; -} - -static const struct dev_pm_ops adx_wdt_pm_ops = { - .suspend = adx_wdt_suspend, - .resume = adx_wdt_resume, -}; - -# define ADX_WDT_PM_OPS (&adx_wdt_pm_ops) -#else -# define ADX_WDT_PM_OPS NULL -#endif - -static struct platform_driver adx_wdt_driver = { - .probe = adx_wdt_probe, - .remove = __devexit_p(adx_wdt_remove), - .shutdown = adx_wdt_shutdown, - .driver = { - .name = WATCHDOG_NAME, - .owner = THIS_MODULE, - .pm = ADX_WDT_PM_OPS, - }, -}; - -static int __init adx_wdt_init(void) -{ - return platform_driver_register(&adx_wdt_driver); -} - -static void __exit adx_wdt_exit(void) -{ - platform_driver_unregister(&adx_wdt_driver); -} - -module_init(adx_wdt_init); -module_exit(adx_wdt_exit); - -MODULE_DESCRIPTION("Avionic Design Xanthos Watchdog Driver"); -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Thierry Reding "); -MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -- cgit v0.10.2 From 0f768a7235d3dfb6f4833030a95a06419df089cb Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Mon, 14 Nov 2011 16:35:26 -0600 Subject: ASoC: fsl_ssi: properly initialize the sysfs attribute object Commit 6992f533 ("sysfs: Use one lockdep class per sysfs attribute") requires 'struct attribute' objects to be initialized with sysfs_attr_init(). Signed-off-by: Timur Tabi Signed-off-by: Mark Brown Cc: stable@kernel.org diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 0268cf9..83c4bd5 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -694,6 +694,7 @@ static int __devinit fsl_ssi_probe(struct platform_device *pdev) /* Initialize the the device_attribute structure */ dev_attr = &ssi_private->dev_attr; + sysfs_attr_init(&dev_attr->attr); dev_attr->attr.name = "statistics"; dev_attr->attr.mode = S_IRUGO; dev_attr->show = fsl_sysfs_ssi_show; -- cgit v0.10.2 From f1ebcc74d5b2159f44c96b479b6eb8afc7829095 Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Mon, 14 Nov 2011 20:48:06 -0500 Subject: Btrfs: fix tree corruption after multi-thread snapshots and inode_cache flush The btrfs snapshotting code requires that once a root has been snapshotted, we don't change it during a commit. But there are two cases to lead to tree corruptions: 1) multi-thread snapshots can commit serveral snapshots in a transaction, and this may change the src root when processing the following pending snapshots, which lead to the former snapshots corruptions; 2) the free inode cache was changing the roots when it root the cache, which lead to corruptions. This fixes things by making sure we force COW the block after we create a snapshot during commiting a transaction, then any changes to the roots will result in COW, and we get all the fs roots and snapshot roots to be consistent. Signed-off-by: Liu Bo Signed-off-by: Miao Xie Signed-off-by: Chris Mason diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index 0fe615e..dede441 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -514,10 +514,25 @@ static inline int should_cow_block(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct extent_buffer *buf) { + /* ensure we can see the force_cow */ + smp_rmb(); + + /* + * We do not need to cow a block if + * 1) this block is not created or changed in this transaction; + * 2) this block does not belong to TREE_RELOC tree; + * 3) the root is not forced COW. + * + * What is forced COW: + * when we create snapshot during commiting the transaction, + * after we've finished coping src root, we must COW the shared + * block to ensure the metadata consistency. + */ if (btrfs_header_generation(buf) == trans->transid && !btrfs_header_flag(buf, BTRFS_HEADER_FLAG_WRITTEN) && !(root->root_key.objectid != BTRFS_TREE_RELOC_OBJECTID && - btrfs_header_flag(buf, BTRFS_HEADER_FLAG_RELOC))) + btrfs_header_flag(buf, BTRFS_HEADER_FLAG_RELOC)) && + !root->force_cow) return 0; return 1; } diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index b9ba59f..b1cb3c0 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -1271,6 +1271,8 @@ struct btrfs_root { * for stat. It may be used for more later */ dev_t anon_dev; + + int force_cow; }; struct btrfs_ioctl_defrag_range_args { diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 6a0574e..81376d9 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -785,6 +785,10 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans, btrfs_save_ino_cache(root, trans); + /* see comments in should_cow_block() */ + root->force_cow = 0; + smp_wmb(); + if (root->commit_root != root->node) { mutex_lock(&root->fs_commit_mutex); switch_commit_root(root); @@ -947,6 +951,10 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans, btrfs_tree_unlock(old); free_extent_buffer(old); + /* see comments in should_cow_block() */ + root->force_cow = 1; + smp_wmb(); + btrfs_set_root_node(new_root_item, tmp); /* record when the snapshot was created in key.offset */ key.offset = trans->transid; -- cgit v0.10.2 From 731ad81e2dd97e3f222361f7b3ff4b35639e46af Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Fri, 28 Oct 2011 09:37:34 +0900 Subject: USB: pch_udc: Support new device LAPIS Semiconductor ML7831 IOH ML7831 is companion chip for Intel Atom E6xx series. Signed-off-by: Tomoya MORINAGA Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index b21cd37..23a4473 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -469,7 +469,7 @@ config USB_LANGWELL gadget drivers to also be dynamically linked. config USB_EG20T - tristate "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH UDC" + tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC" depends on PCI select USB_GADGET_DUALSPEED help @@ -485,10 +485,11 @@ config USB_EG20T This driver dose not support interrupt transfer or isochronous transfer modes. - This driver also can be used for OKI SEMICONDUCTOR's ML7213 which is + This driver also can be used for LAPIS Semiconductor's ML7213 which is for IVI(In-Vehicle Infotainment) use. - ML7213 is companion chip for Intel Atom E6xx series. - ML7213 is completely compatible for Intel EG20T PCH. + ML7831 is for general purpose use. + ML7213/ML7831 is companion chip for Intel Atom E6xx series. + ML7213/ML7831 is completely compatible for Intel EG20T PCH. config USB_CI13XXX_MSM tristate "MIPS USB CI13xxx for MSM" diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c index 550d6dc..729e974 100644 --- a/drivers/usb/gadget/pch_udc.c +++ b/drivers/usb/gadget/pch_udc.c @@ -354,6 +354,7 @@ struct pch_udc_dev { #define PCI_DEVICE_ID_INTEL_EG20T_UDC 0x8808 #define PCI_VENDOR_ID_ROHM 0x10DB #define PCI_DEVICE_ID_ML7213_IOH_UDC 0x801D +#define PCI_DEVICE_ID_ML7831_IOH_UDC 0x8808 static const char ep0_string[] = "ep0in"; static DEFINE_SPINLOCK(udc_stall_spinlock); /* stall spin lock */ @@ -2970,6 +2971,11 @@ static DEFINE_PCI_DEVICE_TABLE(pch_udc_pcidev_id) = { .class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe, .class_mask = 0xffffffff, }, + { + PCI_DEVICE(PCI_VENDOR_ID_ROHM, PCI_DEVICE_ID_ML7831_IOH_UDC), + .class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe, + .class_mask = 0xffffffff, + }, { 0 }, }; -- cgit v0.10.2 From 09b658dcb23efab48af10f85d5003ad3659938bc Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Fri, 28 Oct 2011 09:37:35 +0900 Subject: USB: pch_udc: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor On October 1 in 2011, OKI SEMICONDUCTOR Co., Ltd. changed the company name in to LAPIS Semiconductor Co., Ltd. Signed-off-by: Tomoya MORINAGA Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c index 729e974..5048a0c 100644 --- a/drivers/usb/gadget/pch_udc.c +++ b/drivers/usb/gadget/pch_udc.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD. + * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -3005,5 +3005,5 @@ static void __exit pch_udc_pci_exit(void) module_exit(pch_udc_pci_exit); MODULE_DESCRIPTION("Intel EG20T USB Device Controller"); -MODULE_AUTHOR("OKI SEMICONDUCTOR, "); +MODULE_AUTHOR("LAPIS Semiconductor, "); MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 0c16595539b612fe948559433dda08ff96a8bdc7 Mon Sep 17 00:00:00 2001 From: wangyanqing Date: Thu, 10 Nov 2011 14:04:08 +0800 Subject: USB: serial: pl2303: rm duplicate id I get report from customer that his usb-serial converter doesn't work well,it sometimes work, but sometimes it doesn't. The usb-serial converter's id: vendor_id product_id 0x4348 0x5523 Then I search the usb-serial codes, and there are two drivers announce support this device, pl2303 and ch341, commit 026dfaf1 cause it. Through many times to test, ch341 works well with this device, and pl2303 doesn't work quite often(it just work quite little). ch341 works well with this device, so we doesn't need pl2303 to support.I try to revert 026dfaf1 first, but it failed. So I prepare this patch by hand to revert it. Signed-off-by: Wang YanQing Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 9083d1e..fc2d66f 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -91,7 +91,6 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) }, { USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) }, { USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) }, - { USB_DEVICE(WINCHIPHEAD_VENDOR_ID, WINCHIPHEAD_USBSER_PRODUCT_ID) }, { USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index 3d10d7f..c38b8c0 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -145,10 +145,6 @@ #define ADLINK_VENDOR_ID 0x0b63 #define ADLINK_ND6530_PRODUCT_ID 0x6530 -/* WinChipHead USB->RS 232 adapter */ -#define WINCHIPHEAD_VENDOR_ID 0x4348 -#define WINCHIPHEAD_USBSER_PRODUCT_ID 0x5523 - /* SMART USB Serial Adapter */ #define SMART_VENDOR_ID 0x0b8c #define SMART_PRODUCT_ID 0x2303 -- cgit v0.10.2 From 5b061623355d8f69327a24838b0aa05e435ae5d5 Mon Sep 17 00:00:00 2001 From: VU Tuan Duc Date: Tue, 15 Nov 2011 14:08:00 +0700 Subject: USB: option: add id for 3G dongle Model VT1000 of Viettel Add VendorID/ProductID for USB 3G dongle Model VT1000 of Viettel. Signed-off-by: VU Tuan Duc Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 89ae1f6..b8da93b 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -468,6 +468,10 @@ static void option_instat_callback(struct urb *urb); #define YUGA_PRODUCT_CLU528 0x260D #define YUGA_PRODUCT_CLU526 0x260F +/* Viettel products */ +#define VIETTEL_VENDOR_ID 0x2262 +#define VIETTEL_PRODUCT_VT1000 0x0002 + /* some devices interfaces need special handling due to a number of reasons */ enum option_blacklist_reason { OPTION_BLACKLIST_NONE = 0, @@ -1141,6 +1145,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU516) }, { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU528) }, { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) }, + { USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- cgit v0.10.2 From bc985c10f388c0e5fb2cff95ff2220721627fbd8 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 15 Nov 2011 09:23:26 +0200 Subject: USB: storage: ene_ub6250: fix compile warnings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the following compile warning: | drivers/usb/storage/ene_ub6250.c: In function ‘ms_scsi_write’: | drivers/usb/storage/ene_ub6250.c:1728:6: warning: ‘result’ may \ | be used uninitialized in this function [-Wuninitialized] | drivers/usb/storage/ene_ub6250.c:1795:77: warning: ‘offset’ may \ | be used uninitialized in this function [-Wuninitialized] Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c index 4dca3ef..9fbe742 100644 --- a/drivers/usb/storage/ene_ub6250.c +++ b/drivers/usb/storage/ene_ub6250.c @@ -1762,10 +1762,9 @@ static int ms_scsi_write(struct us_data *us, struct scsi_cmnd *srb) result = ene_send_scsi_cmd(us, FDIR_WRITE, scsi_sglist(srb), 1); } else { void *buf; - int offset; + int offset = 0; u16 PhyBlockAddr; u8 PageNum; - u32 result; u16 len, oldphy, newphy; buf = kmalloc(blenByte, GFP_KERNEL); -- cgit v0.10.2 From f64ae042d94d376b54e7a343d93c48561e9d2e16 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Fri, 11 Nov 2011 08:33:48 +0800 Subject: slub: use correct parameter to add a page to partial list tail unfreeze_partials() needs add the page to partial list tail, since such page hasn't too many free objects. We now explictly use DEACTIVATE_TO_TAIL for this, while DEACTIVATE_TO_TAIL != 1. This will cause performance regression (eg, more lock contention in node->list_lock) without below fix. Signed-off-by: Shaohua Li Acked-by: Christoph Lameter Acked-by: David Rientjes Signed-off-by: Pekka Enberg diff --git a/mm/slub.c b/mm/slub.c index 7d2a996..60e16c4 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -1904,7 +1904,8 @@ static void unfreeze_partials(struct kmem_cache *s) if (l == M_PARTIAL) remove_partial(n, page); else - add_partial(n, page, 1); + add_partial(n, page, + DEACTIVATE_TO_TAIL); l = m; } -- cgit v0.10.2 From 9ada19342b2441f290f0043ed7c562682c8c4ede Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Mon, 14 Nov 2011 13:34:13 +0800 Subject: slub: move discard_slab out of node lock Lockdep reports there is potential deadlock for slub node list_lock. discard_slab() is called with the lock hold in unfreeze_partials(), which could trigger a slab allocation, which could hold the lock again. discard_slab() doesn't need hold the lock actually, if the slab is already removed from partial list. Acked-by: Christoph Lameter Reported-and-tested-by: Yong Zhang Reported-and-tested-by: Julie Sullivan Signed-off-by: Shaohua Li Signed-off-by: Pekka Enberg diff --git a/mm/slub.c b/mm/slub.c index 60e16c4..00efbb5 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -1862,7 +1862,7 @@ static void unfreeze_partials(struct kmem_cache *s) { struct kmem_cache_node *n = NULL; struct kmem_cache_cpu *c = this_cpu_ptr(s->cpu_slab); - struct page *page; + struct page *page, *discard_page = NULL; while ((page = c->partial)) { enum slab_modes { M_PARTIAL, M_FREE }; @@ -1916,14 +1916,22 @@ static void unfreeze_partials(struct kmem_cache *s) "unfreezing slab")); if (m == M_FREE) { - stat(s, DEACTIVATE_EMPTY); - discard_slab(s, page); - stat(s, FREE_SLAB); + page->next = discard_page; + discard_page = page; } } if (n) spin_unlock(&n->list_lock); + + while (discard_page) { + page = discard_page; + discard_page = discard_page->next; + + stat(s, DEACTIVATE_EMPTY); + discard_slab(s, page); + stat(s, FREE_SLAB); + } } /* -- cgit v0.10.2 From 584ad00ce4bfe594e4c4a89944b3c635187a1ca1 Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Fri, 28 Oct 2011 09:33:13 +0900 Subject: pch_phub: Support new device LAPIS Semiconductor ML7831 IOH ML7831 is companion chip for Intel Atom E6xx series. Signed-off-by: Tomoya MORINAGA Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index d593878..5664696 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -472,7 +472,7 @@ config BMP085 module will be called bmp085. config PCH_PHUB - tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223) PHUB" + tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB" depends on PCI help This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of @@ -480,12 +480,13 @@ config PCH_PHUB processor. The Topcliff has MAC address and Option ROM data in SROM. This driver can access MAC address and Option ROM data in SROM. - This driver also can be used for OKI SEMICONDUCTOR IOH(Input/ - Output Hub), ML7213 and ML7223. - ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is - for MP(Media Phone) use. - ML7213/ML7223 is companion chip for Intel Atom E6xx series. - ML7213/ML7223 is completely compatible for Intel EG20T PCH. + This driver also can be used for LAPIS Semiconductor's IOH, + ML7213/ML7223/ML7831. + ML7213 which is for IVI(In-Vehicle Infotainment) use. + ML7223 IOH is for MP(Media Phone) use. + ML7831 IOH is for general purpose use. + ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series. + ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH. To compile this driver as a module, choose M here: the module will be called pch_phub. diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c index dee33ad..b50f48a 100644 --- a/drivers/misc/pch_phub.c +++ b/drivers/misc/pch_phub.c @@ -73,6 +73,9 @@ #define PCI_DEVICE_ID_ROHM_ML7223_mPHUB 0x8012 /* for Bus-m */ #define PCI_DEVICE_ID_ROHM_ML7223_nPHUB 0x8002 /* for Bus-n */ +/* Macros for ML7831 */ +#define PCI_DEVICE_ID_ROHM_ML7831_PHUB 0x8801 + /* SROM ACCESS Macro */ #define PCH_WORD_ADDR_MASK (~((1 << 2) - 1)) @@ -763,6 +766,22 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev, chip->pch_opt_rom_start_address =\ PCH_PHUB_ROM_START_ADDR_ML7223; chip->pch_mac_start_address = PCH_PHUB_MAC_START_ADDR_ML7223; + } else if (id->driver_data == 5) { /* ML7831 */ + retval = sysfs_create_file(&pdev->dev.kobj, + &dev_attr_pch_mac.attr); + if (retval) + goto err_sysfs_create; + + retval = sysfs_create_bin_file(&pdev->dev.kobj, &pch_bin_attr); + if (retval) + goto exit_bin_attr; + + /* set the prefech value */ + iowrite32(0x000affaa, chip->pch_phub_base_address + 0x14); + /* set the interrupt delay value */ + iowrite32(0x25, chip->pch_phub_base_address + 0x44); + chip->pch_opt_rom_start_address = PCH_PHUB_ROM_START_ADDR_EG20T; + chip->pch_mac_start_address = PCH_PHUB_MAC_START_ADDR_EG20T; } chip->ioh_type = id->driver_data; @@ -847,6 +866,7 @@ static struct pci_device_id pch_phub_pcidev_id[] = { { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7213_PHUB), 2, }, { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7223_mPHUB), 3, }, { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7223_nPHUB), 4, }, + { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7831_PHUB), 5, }, { } }; MODULE_DEVICE_TABLE(pci, pch_phub_pcidev_id); -- cgit v0.10.2 From 7f2732c8d7c06f97cc1d530177b7635cb8890b35 Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Fri, 28 Oct 2011 09:33:14 +0900 Subject: pch_phub: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor On October 1 in 2011, OKI SEMICONDUCTOR Co., Ltd. changed the company name in to LAPIS Semiconductor Co., Ltd. Signed-off-by: Tomoya MORINAGA Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c index b50f48a..e7c5995 100644 --- a/drivers/misc/pch_phub.c +++ b/drivers/misc/pch_phub.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD. + * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -41,10 +41,10 @@ #define PCH_PHUB_ROM_START_ADDR_EG20T 0x80 /* ROM data area start address offset (Intel EG20T PCH)*/ #define PCH_PHUB_ROM_START_ADDR_ML7213 0x400 /* ROM data area start address - offset(OKI SEMICONDUCTOR ML7213) + offset(LAPIS Semicon ML7213) */ #define PCH_PHUB_ROM_START_ADDR_ML7223 0x400 /* ROM data area start address - offset(OKI SEMICONDUCTOR ML7223) + offset(LAPIS Semicon ML7223) */ /* MAX number of INT_REDUCE_CONTROL registers */ @@ -893,5 +893,5 @@ static void __exit pch_phub_pci_exit(void) module_init(pch_phub_pci_init); module_exit(pch_phub_pci_exit); -MODULE_DESCRIPTION("Intel EG20T PCH/OKI SEMICONDUCTOR IOH(ML7213/ML7223) PHUB"); +MODULE_DESCRIPTION("Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7223) PHUB"); MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 9914a0de7a27ef2cb5d9aacfe50ae97ebb532f28 Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Fri, 11 Nov 2011 10:12:17 +0900 Subject: pch_phub: Improve ADE(Address Decode Enable) control Currently, external ROM access is enabled/disabled in probe()/remove(). So, when a buggy software access unanticipated memory area, in case of enabling this ADE bit, external ROM memory area can be broken. This patch enables the ADE bit only accessing external ROM area. Signed-off-by: Tomoya MORINAGA Cc: Masayuki Ohtak Cc: Alexander Stein Cc: Denis Turischev Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c index e7c5995..0e2c181 100644 --- a/drivers/misc/pch_phub.c +++ b/drivers/misc/pch_phub.c @@ -118,6 +118,7 @@ * @pch_mac_start_address: MAC address area start address * @pch_opt_rom_start_address: Option ROM start address * @ioh_type: Save IOH type + * @pdev: pointer to pci device struct */ struct pch_phub_reg { u32 phub_id_reg; @@ -139,6 +140,7 @@ struct pch_phub_reg { u32 pch_mac_start_address; u32 pch_opt_rom_start_address; int ioh_type; + struct pci_dev *pdev; }; /* SROM SPEC for MAC address assignment offset */ @@ -501,6 +503,7 @@ static ssize_t pch_phub_bin_read(struct file *filp, struct kobject *kobj, unsigned int orom_size; int ret; int err; + ssize_t rom_size; struct pch_phub_reg *chip = dev_get_drvdata(container_of(kobj, struct device, kobj)); @@ -512,6 +515,10 @@ static ssize_t pch_phub_bin_read(struct file *filp, struct kobject *kobj, } /* Get Rom signature */ + chip->pch_phub_extrom_base_address = pci_map_rom(chip->pdev, &rom_size); + if (!chip->pch_phub_extrom_base_address) + goto exrom_map_err; + pch_phub_read_serial_rom(chip, chip->pch_opt_rom_start_address, (unsigned char *)&rom_signature); rom_signature &= 0xff; @@ -542,10 +549,13 @@ static ssize_t pch_phub_bin_read(struct file *filp, struct kobject *kobj, goto return_err; } return_ok: + pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address); mutex_unlock(&pch_phub_mutex); return addr_offset; return_err: + pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address); +exrom_map_err: mutex_unlock(&pch_phub_mutex); return_err_nomutex: return err; @@ -558,6 +568,7 @@ static ssize_t pch_phub_bin_write(struct file *filp, struct kobject *kobj, int err; unsigned int addr_offset; int ret; + ssize_t rom_size; struct pch_phub_reg *chip = dev_get_drvdata(container_of(kobj, struct device, kobj)); @@ -574,6 +585,12 @@ static ssize_t pch_phub_bin_write(struct file *filp, struct kobject *kobj, goto return_ok; } + chip->pch_phub_extrom_base_address = pci_map_rom(chip->pdev, &rom_size); + if (!chip->pch_phub_extrom_base_address) { + err = -ENOMEM; + goto exrom_map_err; + } + for (addr_offset = 0; addr_offset < count; addr_offset++) { if (PCH_PHUB_OROM_SIZE < off + addr_offset) goto return_ok; @@ -588,10 +605,14 @@ static ssize_t pch_phub_bin_write(struct file *filp, struct kobject *kobj, } return_ok: + pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address); mutex_unlock(&pch_phub_mutex); return addr_offset; return_err: + pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address); + +exrom_map_err: mutex_unlock(&pch_phub_mutex); return err; } @@ -601,8 +622,14 @@ static ssize_t show_pch_mac(struct device *dev, struct device_attribute *attr, { u8 mac[8]; struct pch_phub_reg *chip = dev_get_drvdata(dev); + ssize_t rom_size; + + chip->pch_phub_extrom_base_address = pci_map_rom(chip->pdev, &rom_size); + if (!chip->pch_phub_extrom_base_address) + return -ENOMEM; pch_phub_read_gbe_mac_addr(chip, mac); + pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address); return sprintf(buf, "%pM\n", mac); } @@ -611,6 +638,7 @@ static ssize_t store_pch_mac(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { u8 mac[6]; + ssize_t rom_size; struct pch_phub_reg *chip = dev_get_drvdata(dev); if (count != 18) @@ -620,7 +648,12 @@ static ssize_t store_pch_mac(struct device *dev, struct device_attribute *attr, (u32 *)&mac[0], (u32 *)&mac[1], (u32 *)&mac[2], (u32 *)&mac[3], (u32 *)&mac[4], (u32 *)&mac[5]); + chip->pch_phub_extrom_base_address = pci_map_rom(chip->pdev, &rom_size); + if (!chip->pch_phub_extrom_base_address) + return -ENOMEM; + pch_phub_write_gbe_mac_addr(chip, mac); + pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address); return count; } @@ -643,7 +676,6 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev, int retval; int ret; - ssize_t rom_size; struct pch_phub_reg *chip; chip = kzalloc(sizeof(struct pch_phub_reg), GFP_KERNEL); @@ -680,19 +712,7 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev, "in pch_phub_base_address variable is %p\n", __func__, chip->pch_phub_base_address); - if (id->driver_data != 3) { - chip->pch_phub_extrom_base_address =\ - pci_map_rom(pdev, &rom_size); - if (chip->pch_phub_extrom_base_address == 0) { - dev_err(&pdev->dev, "%s: pci_map_rom FAILED", __func__); - ret = -ENOMEM; - goto err_pci_map; - } - dev_dbg(&pdev->dev, "%s : " - "pci_map_rom SUCCESS and value in " - "pch_phub_extrom_base_address variable is %p\n", - __func__, chip->pch_phub_extrom_base_address); - } + chip->pdev = pdev; /* Save pci device struct */ if (id->driver_data == 1) { /* EG20T PCH */ const char *board_name; @@ -792,8 +812,6 @@ exit_bin_attr: sysfs_remove_file(&pdev->dev.kobj, &dev_attr_pch_mac.attr); err_sysfs_create: - pci_unmap_rom(pdev, chip->pch_phub_extrom_base_address); -err_pci_map: pci_iounmap(pdev, chip->pch_phub_base_address); err_pci_iomap: pci_release_regions(pdev); @@ -811,7 +829,6 @@ static void __devexit pch_phub_remove(struct pci_dev *pdev) sysfs_remove_file(&pdev->dev.kobj, &dev_attr_pch_mac.attr); sysfs_remove_bin_file(&pdev->dev.kobj, &pch_bin_attr); - pci_unmap_rom(pdev, chip->pch_phub_extrom_base_address); pci_iounmap(pdev, chip->pch_phub_base_address); pci_release_regions(pdev); pci_disable_device(pdev); -- cgit v0.10.2 From 2a9887919457c6e1bd482e8448223be59d19010a Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Fri, 11 Nov 2011 10:12:18 +0900 Subject: pch_phub: Fix MAC address writing issue for LAPIS ML7831 ISSUE: Using ML7831, MAC address writing doesn't work well. CAUSE: ML7831 and EG20T have the same register map for MAC address access. However, this driver processes the writing the same as ML7223. This is not true. This driver must process the writing the same as EG20T. This patch fixes the issue. Signed-off-by: Tomoya MORINAGA Cc: Masayuki Ohtak Cc: Alexander Stein Cc: Denis Turischev Signed-off-by: Andrew Morton Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c index 0e2c181..10fc478 100644 --- a/drivers/misc/pch_phub.c +++ b/drivers/misc/pch_phub.c @@ -476,7 +476,7 @@ static int pch_phub_write_gbe_mac_addr(struct pch_phub_reg *chip, u8 *data) int retval; int i; - if (chip->ioh_type == 1) /* EG20T */ + if ((chip->ioh_type == 1) || (chip->ioh_type == 5)) /* EG20T or ML7831*/ retval = pch_phub_gbe_serial_rom_conf(chip); else /* ML7223 */ retval = pch_phub_gbe_serial_rom_conf_mp(chip); -- cgit v0.10.2 From 7b08fae8fbf0c14f003be8e039ed37bcbae4415a Mon Sep 17 00:00:00 2001 From: Marcos Paulo de Souza Date: Tue, 1 Nov 2011 11:15:40 -0700 Subject: device.h: Fix struct member documentation Fix warning of make xmldocs of documention of the struct member iommu_ops from struct bus_type. Signed-off-by: Marcos Paulo de Souza Acked-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman diff --git a/include/linux/device.h b/include/linux/device.h index ffbcf95..2b88320 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -69,7 +69,7 @@ extern void bus_remove_file(struct bus_type *, struct bus_attribute *); * @resume: Called to bring a device on this bus out of sleep mode. * @pm: Power management operations of this bus, callback the specific * device driver's pm-ops. - * @iommu_ops IOMMU specific operations for this bus, used to attach IOMMU + * @iommu_ops: IOMMU specific operations for this bus, used to attach IOMMU * driver implementations to a bus and allow the driver to do * bus-specific setup * @p: The private data of the driver core, only the driver core can -- cgit v0.10.2 From b2433d861eaf349f4dcdc9281e75b139c1809dd3 Mon Sep 17 00:00:00 2001 From: Geoff Thorpe Date: Wed, 2 Nov 2011 11:44:44 -0400 Subject: uio: documentation fixups The 'name' attribute of struct uio_mem wasn't documented, and the note about 'kobj' is stale and needs to be changed to 'map'. Signed-off-by: Geoff Thorpe Signed-off-by: "Hans J. Koch" Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl index 54883de..ac3d001 100644 --- a/Documentation/DocBook/uio-howto.tmpl +++ b/Documentation/DocBook/uio-howto.tmpl @@ -521,6 +521,11 @@ Here's a description of the fields of struct uio_mem: +const char *name: Optional. Set this to help identify +the memory region, it will show up in the corresponding sysfs node. + + + int memtype: Required if the mapping is used. Set this to UIO_MEM_PHYS if you you have physical memory on your card to be mapped. Use UIO_MEM_LOGICAL for logical @@ -553,7 +558,7 @@ instead to remember such an address. -Please do not touch the kobj element of +Please do not touch the map element of struct uio_mem! It is used by the UIO framework to set up sysfs files for this mapping. Simply leave it alone. -- cgit v0.10.2 From 52b3bfc69efc44447ed2db25dd999aef64b3c970 Mon Sep 17 00:00:00 2001 From: Lucas Kannebley Tavares Date: Fri, 28 Oct 2011 13:52:08 -0200 Subject: jsm: Change maintainership Breno Leitao has passed the maintainership on to me. Signed-off-by: Lucas Kannebley Tavares Acked-by: Breno Leitao Signed-off-by: Greg Kroah-Hartman diff --git a/MAINTAINERS b/MAINTAINERS index 4808256..cc6a466 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3710,7 +3710,7 @@ F: fs/jbd2/ F: include/linux/jbd2.h JSM Neo PCI based serial card -M: Breno Leitao +M: Lucas Tavares L: linux-serial@vger.kernel.org S: Maintained F: drivers/tty/serial/jsm/ -- cgit v0.10.2 From c2a3e84f950e7ddba1f3914b005861d46ae60359 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 25 Oct 2011 19:19:43 -0700 Subject: tty: hvc_dcc: Fix duplicate character inputs Reading from the DCC grabs a character from the buffer and clears the status bit. Since this is a context-changing operation, instructions following the character read that rely on the status bit being accurate need to be synchronized with an ISB. In this case, the status bit check needs to execute after the character read otherwise we run the risk of reading the character and checking the status bit before the read can clear the status bit in the first place. When this happens, the user will see the same character they typed twice, instead of once. Add an ISB after the read and the write, so that the status check is synchronized with the read/write operations. Signed-off-by: Stephen Boyd Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c index 435f6fa..44fbeba 100644 --- a/drivers/tty/hvc/hvc_dcc.c +++ b/drivers/tty/hvc/hvc_dcc.c @@ -46,6 +46,7 @@ static inline char __dcc_getchar(void) asm volatile("mrc p14, 0, %0, c0, c5, 0 @ read comms data reg" : "=r" (__c)); + isb(); return __c; } @@ -55,6 +56,7 @@ static inline void __dcc_putchar(char c) asm volatile("mcr p14, 0, %0, c0, c5, 0 @ write a char" : /* no output register */ : "r" (c)); + isb(); } static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count) -- cgit v0.10.2 From a1d7cfe29f13cf45f8094929864b9c66bf0cd91b Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Thu, 27 Oct 2011 15:45:18 +0900 Subject: pch_uart: Fix hw-flow control issue Using hardware flow control, currently, register of the control-bit(AFE) is not set. This patch fixes the issue. Signed-off-by: Tomoya MORINAGA Acked-by: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 21febef..2f07a67 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -1280,6 +1280,7 @@ static void pch_uart_set_termios(struct uart_port *port, if (rtn) goto out; + pch_uart_set_mctrl(&priv->port, priv->port.mctrl); /* Don't rewrite B0 */ if (tty_termios_baud_rate(termios)) tty_termios_encode_baud_rate(termios, baud, baud); -- cgit v0.10.2 From 8249f743f732ccbc3056428945ab1d9bd36d46bf Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Fri, 28 Oct 2011 09:38:49 +0900 Subject: pch_uart: Support new device LAPIS Semiconductor ML7831 IOH ML7831 is companion chip for Intel Atom E6xx series. Signed-off-by: Tomoya MORINAGA Acked-by: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 5f479da..925a1e5 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1560,7 +1560,7 @@ config SERIAL_IFX6X60 Support for the IFX6x60 modem devices on Intel MID platforms. config SERIAL_PCH_UART - tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223) UART" + tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART" depends on PCI select SERIAL_CORE help @@ -1568,12 +1568,12 @@ config SERIAL_PCH_UART which is an IOH(Input/Output Hub) for x86 embedded processor. Enabling PCH_DMA, this PCH UART works as DMA mode. - This driver also can be used for OKI SEMICONDUCTOR IOH(Input/ - Output Hub), ML7213 and ML7223. - ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is - for MP(Media Phone) use. - ML7213/ML7223 is companion chip for Intel Atom E6xx series. - ML7213/ML7223 is completely compatible for Intel EG20T PCH. + This driver also can be used for LAPIS Semiconductor IOH(Input/ + Output Hub), ML7213, ML7223 and ML7831. + ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is + for MP(Media Phone) use and ML7831 IOH is for general purpose use. + ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series. + ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH. config SERIAL_MSM_SMD bool "Enable tty device interface for some SMD ports" diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 2f07a67..2ef0e7d 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -258,6 +258,8 @@ enum pch_uart_num_t { pch_ml7213_uart2, pch_ml7223_uart0, pch_ml7223_uart1, + pch_ml7831_uart0, + pch_ml7831_uart1, }; static struct pch_uart_driver_data drv_dat[] = { @@ -270,6 +272,8 @@ static struct pch_uart_driver_data drv_dat[] = { [pch_ml7213_uart2] = {PCH_UART_2LINE, 2}, [pch_ml7223_uart0] = {PCH_UART_8LINE, 0}, [pch_ml7223_uart1] = {PCH_UART_2LINE, 1}, + [pch_ml7831_uart0] = {PCH_UART_8LINE, 0}, + [pch_ml7831_uart1] = {PCH_UART_2LINE, 1}, }; static unsigned int default_baud = 9600; @@ -1553,6 +1557,10 @@ static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = { .driver_data = pch_ml7223_uart0}, {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800D), .driver_data = pch_ml7223_uart1}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8811), + .driver_data = pch_ml7831_uart0}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8812), + .driver_data = pch_ml7831_uart1}, {0,}, }; -- cgit v0.10.2 From eca9dfa846a3d0eeb865e290851f4bfe4fb34fdd Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Fri, 28 Oct 2011 09:38:50 +0900 Subject: pch_uart: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor On October 1 in 2011, OKI SEMICONDUCTOR Co., Ltd. changed the company name in to LAPIS Semiconductor Co., Ltd. Signed-off-by: Tomoya MORINAGA Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 2ef0e7d..ac852b5 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -1,5 +1,5 @@ /* - *Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD. + *Copyright (C) 2011 LAPIS Semiconductor Co., Ltd. * *This program is free software; you can redistribute it and/or modify *it under the terms of the GNU General Public License as published by @@ -46,8 +46,8 @@ enum { /* Set the max number of UART port * Intel EG20T PCH: 4 port - * OKI SEMICONDUCTOR ML7213 IOH: 3 port - * OKI SEMICONDUCTOR ML7223 IOH: 2 port + * LAPIS Semiconductor ML7213 IOH: 3 port + * LAPIS Semiconductor ML7223 IOH: 2 port */ #define PCH_UART_NR 4 -- cgit v0.10.2 From 9636b755da7b498094bdf15b4ce9f6fd16995e4e Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Tue, 11 Oct 2011 17:05:43 -0700 Subject: tty/serial: Prevent drop of DCD on suspend for Tegra UARTs On Tegra UARTs (except UART1), the DTR / DCD / DSR lines are not externally accessible. Instead, the DTR line internally appears to be looped back to be the input to the DCD and DSR lines. The net effect of this is that when we drop DTR (like when we suspend), we'll see DCD drop too. ...and when we see DCD drop, we treat that as a hangup. In order to prevent this hangup from occurring at every sleep, we need to force DTR to remain high on Tegra UARTs. This patch uses the mcr_mask / mcr_force fields, which were originally added for the kludge ALPHA_KLUDGE_MCR. Using these fields does not prevent us from removing ALPHA_KLUDGE_MCR--we can just remove the "if" tests I have added and always init mcr_mask / mcr_force from the serial8250_config. NOTE: If we have people that are using UARTA on a Tegra and need to control DTR, we'll need to either add a separate port type for UARTA or we'll need to add some tegra-specific code to detect whether the DTR needs to be left high. Signed-off-by: Doug Anderson Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c index eeadf1b..2b0a4b6 100644 --- a/drivers/tty/serial/8250.c +++ b/drivers/tty/serial/8250.c @@ -308,6 +308,8 @@ static const struct serial8250_config uart_config[] = { .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | UART_FCR_T_TRIG_01, .flags = UART_CAP_FIFO | UART_CAP_RTOIE, + .mcr_mask = ~UART_MCR_DTR, + .mcr_force = UART_MCR_DTR, }, [PORT_XR17D15X] = { .name = "XR17D15X", @@ -1229,6 +1231,10 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) up->port.fifosize = uart_config[up->port.type].fifo_size; up->capabilities = uart_config[up->port.type].flags; up->tx_loadsz = uart_config[up->port.type].tx_loadsz; + if (!ALPHA_KLUDGE_MCR) { + up->mcr_mask = uart_config[up->port.type].mcr_mask; + up->mcr_force = uart_config[up->port.type].mcr_force; + } if (up->port.type == PORT_UNKNOWN) goto out; @@ -1987,6 +1993,10 @@ static int serial8250_startup(struct uart_port *port) up->port.fifosize = uart_config[up->port.type].fifo_size; up->tx_loadsz = uart_config[up->port.type].tx_loadsz; up->capabilities = uart_config[up->port.type].flags; + if (!ALPHA_KLUDGE_MCR) { + up->mcr_mask = uart_config[up->port.type].mcr_mask; + up->mcr_force = uart_config[up->port.type].mcr_force; + } up->mcr = 0; if (up->port.iotype != up->cur_iotype) @@ -2793,6 +2803,10 @@ serial8250_init_fixed_type_port(struct uart_8250_port *up, unsigned int type) up->port.fifosize = uart_config[type].fifo_size; up->capabilities = uart_config[type].flags; up->tx_loadsz = uart_config[type].tx_loadsz; + if (!ALPHA_KLUDGE_MCR) { + up->mcr_mask = uart_config[type].mcr_mask; + up->mcr_force = uart_config[type].mcr_force; + } } static void __init diff --git a/drivers/tty/serial/8250.h b/drivers/tty/serial/8250.h index 6edf4a6..1f75100 100644 --- a/drivers/tty/serial/8250.h +++ b/drivers/tty/serial/8250.h @@ -35,6 +35,8 @@ struct serial8250_config { unsigned short tx_loadsz; unsigned char fcr; unsigned int flags; + unsigned char mcr_mask; + unsigned char mcr_force; }; #define UART_CAP_FIFO (1 << 8) /* UART has FIFO */ -- cgit v0.10.2 From 604fdb75094a7367e1794fd0f62183380364ce13 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 10 Nov 2011 13:17:55 +0000 Subject: serial,mfd: Fix CMSPAR setup This is referenced the wrong way. Mika Westerberg added some checks to the tty to support multiple console, but the real problem is simply referencing the termios object via the wrong path. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c index 286c386..e272d39 100644 --- a/drivers/tty/serial/mfd.c +++ b/drivers/tty/serial/mfd.c @@ -884,7 +884,6 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios, { struct uart_hsu_port *up = container_of(port, struct uart_hsu_port, port); - struct tty_struct *tty = port->state->port.tty; unsigned char cval, fcr = 0; unsigned long flags; unsigned int baud, quot; @@ -907,8 +906,7 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios, } /* CMSPAR isn't supported by this driver */ - if (tty) - tty->termios->c_cflag &= ~CMSPAR; + termios->c_cflag &= ~CMSPAR; if (termios->c_cflag & CSTOPB) cval |= UART_LCR_STOP; -- cgit v0.10.2 From 90f04c2926cfb5bf74533b0a7766bc896f6a0c0e Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Fri, 11 Nov 2011 10:55:27 +0900 Subject: pch_uart: Fix DMA resource leak issue Changing UART mode PIO->DMA->PIO->DMA like below, pch_uart driver can't get DMA channel resource. setserial /dev/ttyPCH0 ^low_latency setserial /dev/ttyPCH0 low_latency CAUSE: Changing mode using setserial command, ".startup" function which gets DMA channel is called before ".verify_port" function which sets dma-flag(use_dma/use_dma_flag) as 1. PIO->DMA .startup: Since dma-flag is 0, DMA channel is not requested. .verify_port: dma-flag is set as 1. .shutdown: N/A DMA->PIO .startup: Since dma-flag is 1, DMA channel is requested. .verify_port: dma-flag is set as 0. .shutdown: Since dma-flag is 0, DMA channel is not released. This means DMA channel resource leak occurs. Next time, this driver can't get DMA channel resource forever. MODIFICATION: Currently, when release DMA channel resource, this driver checks dma-flag. However, this specification occurs the above issue. This driver must check whether dma_request_channel is executed or not. The values are saved in private data variable "chan_tx/chan_tx". These variables mean if the value is NULL, DMA channel is not requested, if not NULL, DMA channel is requested. This patch fixes the issue. Signed-off-by: Tomoya MORINAGA Acked-by: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index ac852b5..d6aba8c 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -632,6 +632,7 @@ static void pch_request_dma(struct uart_port *port) dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Rx)\n", __func__); dma_release_channel(priv->chan_tx); + priv->chan_tx = NULL; return; } @@ -1219,8 +1220,7 @@ static void pch_uart_shutdown(struct uart_port *port) dev_err(priv->port.dev, "pch_uart_hal_set_fifo Failed(ret=%d)\n", ret); - if (priv->use_dma_flag) - pch_free_dma(port); + pch_free_dma(port); free_irq(priv->port.irq, priv); } -- cgit v0.10.2 From 93f3350c46fa5dfcc9650eb19b186e71ffc924c3 Mon Sep 17 00:00:00 2001 From: Claudio Scordino Date: Wed, 9 Nov 2011 15:51:49 +0100 Subject: RS485: fix inconsistencies in the meaning of some variables The crisv10.c and the atmel_serial.c serial drivers intepret the fields of the serial_rs485 structure in a different way. In particular, crisv10.c uses SER_RS485_RTS_AFTER_SEND and SER_RS485_RTS_ON_SEND for the voltage of the RTS pin; atmel_serial.c, instead, uses these values to know if a delay must be set before and after sending. This patch makes the usage of these variables consistent across all drivers and fixes the Documentation as well. From now on, SER_RS485_RTS_AFTER_SEND and SER_RS485_RTS_ON_SEND will be used to set the voltage of the RTS pin (as in the crisv10.c driver); the delay will be understood by looking only at the value of delay_rts_before_send and delay_rts_after_send. Signed-off-by: Claudio Scordino Signed-off-by: Darron Black Acked-by: Jesper Nilsson Acked-by: Nicolas Ferre Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/serial/serial-rs485.txt b/Documentation/serial/serial-rs485.txt index 079cb3d..41c8378 100644 --- a/Documentation/serial/serial-rs485.txt +++ b/Documentation/serial/serial-rs485.txt @@ -97,15 +97,23 @@ struct serial_rs485 rs485conf; - /* Set RS485 mode: */ + /* Enable RS485 mode: */ rs485conf.flags |= SER_RS485_ENABLED; + /* Set logical level for RTS pin equal to 1 when sending: */ + rs485conf.flags |= SER_RS485_RTS_ON_SEND; + /* or, set logical level for RTS pin equal to 0 when sending: */ + rs485conf.flags &= ~(SER_RS485_RTS_ON_SEND); + + /* Set logical level for RTS pin equal to 1 after sending: */ + rs485conf.flags |= SER_RS485_RTS_AFTER_SEND; + /* or, set logical level for RTS pin equal to 0 after sending: */ + rs485conf.flags &= ~(SER_RS485_RTS_AFTER_SEND); + /* Set rts delay before send, if needed: */ - rs485conf.flags |= SER_RS485_RTS_BEFORE_SEND; rs485conf.delay_rts_before_send = ...; /* Set rts delay after send, if needed: */ - rs485conf.flags |= SER_RS485_RTS_AFTER_SEND; rs485conf.delay_rts_after_send = ...; /* Set this flag if you want to receive data even whilst sending data */ diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 4a0f86f..4c823f3 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -228,7 +228,7 @@ void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) if (rs485conf->flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; - if (rs485conf->flags & SER_RS485_RTS_AFTER_SEND) + if ((rs485conf->delay_rts_after_send) > 0) UART_PUT_TTGR(port, rs485conf->delay_rts_after_send); mode |= ATMEL_US_USMODE_RS485; } else { @@ -304,7 +304,7 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl) if (atmel_port->rs485.flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); - if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND) + if ((atmel_port->rs485.delay_rts_after_send) > 0) UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_after_send); mode |= ATMEL_US_USMODE_RS485; @@ -1228,7 +1228,7 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, if (atmel_port->rs485.flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); - if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND) + if ((atmel_port->rs485.delay_rts_after_send) > 0) UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_after_send); mode |= ATMEL_US_USMODE_RS485; @@ -1447,16 +1447,6 @@ static void __devinit atmel_of_init_port(struct atmel_uart_port *atmel_port, rs485conf->delay_rts_after_send = rs485_delay[1]; rs485conf->flags = 0; - if (rs485conf->delay_rts_before_send == 0 && - rs485conf->delay_rts_after_send == 0) { - rs485conf->flags |= SER_RS485_RTS_ON_SEND; - } else { - if (rs485conf->delay_rts_before_send) - rs485conf->flags |= SER_RS485_RTS_BEFORE_SEND; - if (rs485conf->delay_rts_after_send) - rs485conf->flags |= SER_RS485_RTS_AFTER_SEND; - } - if (of_get_property(np, "rs485-rx-during-tx", NULL)) rs485conf->flags |= SER_RS485_RX_DURING_TX; diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c index b743504..1dfba7b 100644 --- a/drivers/tty/serial/crisv10.c +++ b/drivers/tty/serial/crisv10.c @@ -3234,9 +3234,8 @@ rs_write(struct tty_struct *tty, e100_disable_rx(info); e100_enable_rx_irq(info); #endif - if ((info->rs485.flags & SER_RS485_RTS_BEFORE_SEND) && - (info->rs485.delay_rts_before_send > 0)) - msleep(info->rs485.delay_rts_before_send); + if (info->rs485.delay_rts_before_send > 0) + msleep(info->rs485.delay_rts_before_send); } #endif /* CONFIG_ETRAX_RS485 */ @@ -3693,10 +3692,6 @@ rs_ioctl(struct tty_struct *tty, rs485data.delay_rts_before_send = rs485ctrl.delay_rts_before_send; rs485data.flags = 0; - if (rs485data.delay_rts_before_send != 0) - rs485data.flags |= SER_RS485_RTS_BEFORE_SEND; - else - rs485data.flags &= ~(SER_RS485_RTS_BEFORE_SEND); if (rs485ctrl.enabled) rs485data.flags |= SER_RS485_ENABLED; @@ -4531,7 +4526,6 @@ static int __init rs_init(void) /* Set sane defaults */ info->rs485.flags &= ~(SER_RS485_RTS_ON_SEND); info->rs485.flags |= SER_RS485_RTS_AFTER_SEND; - info->rs485.flags &= ~(SER_RS485_RTS_BEFORE_SEND); info->rs485.delay_rts_before_send = 0; info->rs485.flags &= ~(SER_RS485_ENABLED); #endif diff --git a/include/linux/serial.h b/include/linux/serial.h index 97ff8e2..3d86517 100644 --- a/include/linux/serial.h +++ b/include/linux/serial.h @@ -207,13 +207,15 @@ struct serial_icounter_struct { struct serial_rs485 { __u32 flags; /* RS485 feature flags */ -#define SER_RS485_ENABLED (1 << 0) -#define SER_RS485_RTS_ON_SEND (1 << 1) -#define SER_RS485_RTS_AFTER_SEND (1 << 2) -#define SER_RS485_RTS_BEFORE_SEND (1 << 3) +#define SER_RS485_ENABLED (1 << 0) /* If enabled */ +#define SER_RS485_RTS_ON_SEND (1 << 1) /* Logical level for + RTS pin when + sending */ +#define SER_RS485_RTS_AFTER_SEND (1 << 2) /* Logical level for + RTS pin after sent*/ #define SER_RS485_RX_DURING_TX (1 << 4) - __u32 delay_rts_before_send; /* Milliseconds */ - __u32 delay_rts_after_send; /* Milliseconds */ + __u32 delay_rts_before_send; /* Delay before send (milliseconds) */ + __u32 delay_rts_after_send; /* Delay after send (milliseconds) */ __u32 padding[5]; /* Memory is cheap, new structs are a royal PITA .. */ }; -- cgit v0.10.2 From 6edf0c9b1c26d047370cf2f35ff6bb3082243ec3 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 15 Nov 2011 16:01:09 -0800 Subject: Revert "tty/serial: Prevent drop of DCD on suspend for Tegra UARTs" This reverts commit 9636b755da7b498094bdf15b4ce9f6fd16995e4e. It wasn't supposed to be applied, thanks to Doug for letting me know. Cc: Doug Anderson Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c index 2b0a4b6..eeadf1b 100644 --- a/drivers/tty/serial/8250.c +++ b/drivers/tty/serial/8250.c @@ -308,8 +308,6 @@ static const struct serial8250_config uart_config[] = { .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | UART_FCR_T_TRIG_01, .flags = UART_CAP_FIFO | UART_CAP_RTOIE, - .mcr_mask = ~UART_MCR_DTR, - .mcr_force = UART_MCR_DTR, }, [PORT_XR17D15X] = { .name = "XR17D15X", @@ -1231,10 +1229,6 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) up->port.fifosize = uart_config[up->port.type].fifo_size; up->capabilities = uart_config[up->port.type].flags; up->tx_loadsz = uart_config[up->port.type].tx_loadsz; - if (!ALPHA_KLUDGE_MCR) { - up->mcr_mask = uart_config[up->port.type].mcr_mask; - up->mcr_force = uart_config[up->port.type].mcr_force; - } if (up->port.type == PORT_UNKNOWN) goto out; @@ -1993,10 +1987,6 @@ static int serial8250_startup(struct uart_port *port) up->port.fifosize = uart_config[up->port.type].fifo_size; up->tx_loadsz = uart_config[up->port.type].tx_loadsz; up->capabilities = uart_config[up->port.type].flags; - if (!ALPHA_KLUDGE_MCR) { - up->mcr_mask = uart_config[up->port.type].mcr_mask; - up->mcr_force = uart_config[up->port.type].mcr_force; - } up->mcr = 0; if (up->port.iotype != up->cur_iotype) @@ -2803,10 +2793,6 @@ serial8250_init_fixed_type_port(struct uart_8250_port *up, unsigned int type) up->port.fifosize = uart_config[type].fifo_size; up->capabilities = uart_config[type].flags; up->tx_loadsz = uart_config[type].tx_loadsz; - if (!ALPHA_KLUDGE_MCR) { - up->mcr_mask = uart_config[type].mcr_mask; - up->mcr_force = uart_config[type].mcr_force; - } } static void __init diff --git a/drivers/tty/serial/8250.h b/drivers/tty/serial/8250.h index 1f75100..6edf4a6 100644 --- a/drivers/tty/serial/8250.h +++ b/drivers/tty/serial/8250.h @@ -35,8 +35,6 @@ struct serial8250_config { unsigned short tx_loadsz; unsigned char fcr; unsigned int flags; - unsigned char mcr_mask; - unsigned char mcr_force; }; #define UART_CAP_FIFO (1 << 8) /* UART has FIFO */ -- cgit v0.10.2 From ec84d529b689f4ae31813cf74673f3271c36c83a Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 14 Nov 2011 16:12:52 +0000 Subject: ARM: PMU: re-export release_pmu symbol to modules Commit b0e89590 ("ARM: PMU: move CPU PMU platform device handling and init into perf") inadvertently removed the EXPORT_SYMBOL_GPL on release_pmu, so out-of-tree modules can no longer play nice with perf, even if they tried in the first place. This patch re-exports the symbol. Reported-by: Jon Medhurst (Tixy) Signed-off-by: Will Deacon diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c index 2c3407e..2334bf8 100644 --- a/arch/arm/kernel/pmu.c +++ b/arch/arm/kernel/pmu.c @@ -33,3 +33,4 @@ release_pmu(enum arm_pmu_type type) { clear_bit_unlock(type, pmu_lock); } +EXPORT_SYMBOL_GPL(release_pmu); -- cgit v0.10.2 From 14e25c5eeb90d4f61cc94933307d04a19738ad2f Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 16 Nov 2011 10:05:18 +0000 Subject: ARM: PMU: remove pmu_init declaration pmu_init no longer exists, so don't declare it in asm/pmu.h. Reported-by: Pawel Moll Signed-off-by: Will Deacon diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index 71d99b8..0bda22c 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -55,16 +55,6 @@ reserve_pmu(enum arm_pmu_type type); extern void release_pmu(enum arm_pmu_type type); -/** - * init_pmu() - Initialise the PMU. - * - * Initialise the system ready for PMU enabling. This should typically set the - * IRQ affinity and nothing else. The users (oprofile/perf events etc) will do - * the actual hardware initialisation. - */ -extern int -init_pmu(enum arm_pmu_type type); - #else /* CONFIG_CPU_HAS_PMU */ #include -- cgit v0.10.2 From bf14fc54d6386ccd1ef3f1b0ff69e7a765cf8ded Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 6 Jun 2011 12:35:46 +0100 Subject: ARM: highbank: convert logical CPU numbers to physical numbers This patch uses the new cpu_logical_map() macro for converting logical CPU numbers into physical numbers when releasing CPUs during the SMP boot and CPU hotplug paths. Acked-by: Rob Herring Signed-off-by: Will Deacon diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index b82dcf0..88660d5 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -72,6 +73,9 @@ static void __init highbank_map_io(void) void highbank_set_cpu_jump(int cpu, void *jump_addr) { +#ifdef CONFIG_SMP + cpu = cpu_logical_map(cpu); +#endif writel(BSYM(virt_to_phys(jump_addr)), HB_JUMP_TABLE_VIRT(cpu)); __cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16); outer_clean_range(HB_JUMP_TABLE_PHYS(cpu), -- cgit v0.10.2 From eaa142ca3dee1478aca1a645bb0e5a249a33241a Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 9 Aug 2011 12:24:07 +0100 Subject: ARM: mach-imx: convert logical CPU numbers to physical numbers This patch uses the new cpu_logical_map() macro for converting logical CPU numbers into physical numbers when releasing CPUs during the SMP boot and CPU hotplug paths. Cc: Sascha Hauer Acked-by: Shawn Guo Signed-off-by: Will Deacon diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c index 36cacbd..a8e3368 100644 --- a/arch/arm/mach-imx/src.c +++ b/arch/arm/mach-imx/src.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #define SRC_SCR 0x000 @@ -23,10 +24,15 @@ static void __iomem *src_base; +#ifndef CONFIG_SMP +#define cpu_logical_map(cpu) 0 +#endif + void imx_enable_cpu(int cpu, bool enable) { u32 mask, val; + cpu = cpu_logical_map(cpu); mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1); val = readl_relaxed(src_base + SRC_SCR); val = enable ? val | mask : val & ~mask; @@ -35,6 +41,7 @@ void imx_enable_cpu(int cpu, bool enable) void imx_set_cpu_jump(int cpu, void *jump_addr) { + cpu = cpu_logical_map(cpu); writel_relaxed(BSYM(virt_to_phys(jump_addr)), src_base + SRC_GPR1 + cpu * 8); } -- cgit v0.10.2 From 499d05ecf990a7a7bbf9e0a273f9969f8ec69efc Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Wed, 16 Nov 2011 19:34:48 +0800 Subject: mm: Make task in balance_dirty_pages() killable There is no reason why task in balance_dirty_pages() shouldn't be killable and it helps in recovering from some error conditions (like when filesystem goes in error state and cannot accept writeback anymore but we still want to kill processes using it to be able to unmount it). There will be follow up patches to further abort the generic_perform_write() and other filesystem write loops, to avoid large write + SIGKILL combination exceeding the dirty limit and possibly strange OOM. Reported-by: Kazuya Mio Tested-by: Kazuya Mio Reviewed-by: Neil Brown Reviewed-by: KOSAKI Motohiro Signed-off-by: Jan Kara Signed-off-by: Wu Fengguang diff --git a/mm/page-writeback.c b/mm/page-writeback.c index a3278f0..79c3441 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -1133,7 +1133,7 @@ pause: pages_dirtied, pause, start_time); - __set_current_state(TASK_UNINTERRUPTIBLE); + __set_current_state(TASK_KILLABLE); io_schedule_timeout(pause); dirty_thresh = hard_dirty_limit(dirty_thresh); @@ -1145,6 +1145,9 @@ pause: */ if (nr_dirty < dirty_thresh) break; + + if (fatal_signal_pending(current)) + break; } if (!dirty_exceeded && bdi->dirty_exceeded) -- cgit v0.10.2 From 12b248eba4fd189216cad14b7dd1cfdacdf90cdf Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 17 Nov 2011 01:13:34 +0900 Subject: ARM: S5P: Fix export.h inclusion Commit 32aaeffbd4a7 ("Merge branch 'modsplit-Oct31 2011'...") breaks build like following and this fixes it to add inclusion . arch/arm/plat-s5p/sysmmu.c:302: error: 'THIS_MODULE' undeclared here (not in a function) Signed-off-by: Kukjin Kim diff --git a/arch/arm/plat-s5p/sysmmu.c b/arch/arm/plat-s5p/sysmmu.c index e1cbc72..c8bec9c 100644 --- a/arch/arm/plat-s5p/sysmmu.c +++ b/arch/arm/plat-s5p/sysmmu.c @@ -11,6 +11,7 @@ #include #include #include +#include #include -- cgit v0.10.2 From a69e4c28b2bddc21b5752b1da8f43ab0a817305c Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 17 Nov 2011 01:14:38 +0900 Subject: ARM: SAMSUNG: inclusion export.h instead of module.h Only for THIS_MODULE, the file should be added instead of . Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index 6666856..f208154 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -8,7 +8,7 @@ * published by the Free Software Foundation. */ -#include +#include #include #include diff --git a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c index a927666..c7adad0 100644 --- a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c +++ b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c @@ -12,7 +12,7 @@ */ #include -#include +#include #include #include #include diff --git a/arch/arm/plat-samsung/pd.c b/arch/arm/plat-samsung/pd.c index efe1d56..312b510 100644 --- a/arch/arm/plat-samsung/pd.c +++ b/arch/arm/plat-samsung/pd.c @@ -11,7 +11,7 @@ */ #include -#include +#include #include #include #include diff --git a/arch/arm/plat-samsung/pwm.c b/arch/arm/plat-samsung/pwm.c index dc1185d..c559d84 100644 --- a/arch/arm/plat-samsung/pwm.c +++ b/arch/arm/plat-samsung/pwm.c @@ -11,7 +11,7 @@ * the Free Software Foundation; either version 2 of the License. */ -#include +#include #include #include #include -- cgit v0.10.2 From dc2c83582eac2682808b80e9dce7d2cac2b20596 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 17 Nov 2011 01:17:18 +0900 Subject: ARM: SAMSUNG: include linux/types.h at gpio-cfg.h Include linux/types.h to fix below build error: CC drivers/power/max8903_charger.o In file included from arch/arm/plat-samsung/include/plat/gpio-fns.h:27, from arch/arm/mach-s3c2410/include/mach/gpio-fns.h:1, from arch/arm/mach-s3c2410/include/mach/gpio.h:27, from /home/axel/repos/git/linux-2.6/arch/arm/include/asm/gpio.h:5, from include/linux/gpio.h:30, from drivers/power/max8903_charger.c:23: arch/arm/plat-samsung/include/plat/gpio-cfg.h:27: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'samsung_gpio_pull_t' arch/arm/plat-samsung/include/plat/gpio-cfg.h:28: error: expected '=', ',', ';', 'asm' or '__attribute__' before 's5p_gpio_drvstr_t' arch/arm/plat-samsung/include/plat/gpio-cfg.h:55: error: expected specifier-qualifier-list before 'samsung_gpio_pull_t' arch/arm/plat-samsung/include/plat/gpio-cfg.h:146: error: expected declaration specifiers or '...' before 'samsung_gpio_pull_t' arch/arm/plat-samsung/include/plat/gpio-cfg.h:154: error: expected '=', ',', ';', 'asm' or '__attribute__' before 's3c_gpio_getpull' arch/arm/plat-samsung/include/plat/gpio-cfg.h:173: error: expected declaration specifiers or '...' before 'samsung_gpio_pull_t' arch/arm/plat-samsung/include/plat/gpio-cfg.h: In function 's3c_gpio_cfgrange_nopull': arch/arm/plat-samsung/include/plat/gpio-cfg.h:178: error: '__force' undeclared (first use in this function) arch/arm/plat-samsung/include/plat/gpio-cfg.h:178: error: (Each undeclared identifier is reported only once arch/arm/plat-samsung/include/plat/gpio-cfg.h:178: error: for each function it appears in.) arch/arm/plat-samsung/include/plat/gpio-cfg.h:178: error: expected ')' before 'samsung_gpio_pull_t' arch/arm/plat-samsung/include/plat/gpio-cfg.h:178: error: expected ')' before numeric constant arch/arm/plat-samsung/include/plat/gpio-cfg.h:178: error: too many arguments to function 's3c_gpio_cfgall_range' arch/arm/plat-samsung/include/plat/gpio-cfg.h: At top level: arch/arm/plat-samsung/include/plat/gpio-cfg.h:197: error: expected '=', ',', ';', 'asm' or '__attribute__' before 's5p_gpio_get_drvstr' arch/arm/plat-samsung/include/plat/gpio-cfg.h:208: error: expected declaration specifiers or '...' before 's5p_gpio_drvstr_t' make[2]: *** [drivers/power/max8903_charger.o] Error 1 make[1]: *** [drivers/power] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin Cc: stable@kernel.org Signed-off-by: Kukjin Kim diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index d48245b..df8155b 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -24,6 +24,8 @@ #ifndef __PLAT_GPIO_CFG_H #define __PLAT_GPIO_CFG_H __FILE__ +#include + typedef unsigned int __bitwise__ samsung_gpio_pull_t; typedef unsigned int __bitwise__ s5p_gpio_drvstr_t; -- cgit v0.10.2 From f9849100851b28c8ad83e86d68d5110497a4e9d6 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 16 Nov 2011 11:52:12 +0000 Subject: watchdog: Don't overwrite error value in wm831x_wdt_set_timeout() Reported-by: Dan Carpenter Signed-off-by: Mark Brown Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/wm831x_wdt.c b/drivers/watchdog/wm831x_wdt.c index 7be3855..e789a47 100644 --- a/drivers/watchdog/wm831x_wdt.c +++ b/drivers/watchdog/wm831x_wdt.c @@ -150,7 +150,7 @@ static int wm831x_wdt_set_timeout(struct watchdog_device *wdt_dev, if (wm831x_wdt_cfgs[i].time == timeout) break; if (i == ARRAY_SIZE(wm831x_wdt_cfgs)) - ret = -EINVAL; + return -EINVAL; ret = wm831x_reg_unlock(wm831x); if (ret == 0) { -- cgit v0.10.2 From 20403e845f9988446c5b48024ff4d0c3a5929f7d Mon Sep 17 00:00:00 2001 From: Dmitry Artamonow Date: Wed, 16 Nov 2011 12:46:13 +0400 Subject: watchdog: fix initialisation printout in s3c2410_wdt Looks like a typo creeped in, and driver prints s3c2410-wdt s3c2410-wdt: watchdog active, reset abled, irq abled instead of s3c2410-wdt s3c2410-wdt: watchdog active, reset enabled, irq enabled Also it may completely disinform about irq status, as it prints "irq enabled" when S3C2410_WTCON_INTEN is in fact 0. Fix it. Signed-off-by: Dmitry Artamonow Tested-by: Thomas Abraham Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index 5de7e4f..a79e384 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -401,8 +401,8 @@ static int __devinit s3c2410wdt_probe(struct platform_device *pdev) dev_info(dev, "watchdog %sactive, reset %sabled, irq %sabled\n", (wtcon & S3C2410_WTCON_ENABLE) ? "" : "in", - (wtcon & S3C2410_WTCON_RSTEN) ? "" : "dis", - (wtcon & S3C2410_WTCON_INTEN) ? "" : "en"); + (wtcon & S3C2410_WTCON_RSTEN) ? "en" : "dis", + (wtcon & S3C2410_WTCON_INTEN) ? "en" : "dis"); return 0; -- cgit v0.10.2 From 9b7c547f7747991fe62f622698ea1bf470f256f4 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 16 Nov 2011 21:44:33 +0800 Subject: ARM: Update mach-types to fix mxs build breakage MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add entry m28evk to fix the following mxs build breakage. CHK include/generated/compile.h CC arch/arm/mach-mxs/clock-mx28.o arch/arm/mach-mxs/clock-mx28.c: In function 'clk_misc_init': arch/arm/mach-mxs/clock-mx28.c:748: error: implicit declaration of function 'machine_is_m28evk' make[1]: *** [arch/arm/mach-mxs/clock-mx28.o] Error 1 make: *** [arch/arm/mach-mxs] Error 2 Signed-off-by: Shawn Guo Acked-by: Uwe Kleine-König diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 5bdeef9..ccbe16f 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -1123,5 +1123,6 @@ blissc MACH_BLISSC BLISSC 3491 thales_adc MACH_THALES_ADC THALES_ADC 3492 ubisys_p9d_evp MACH_UBISYS_P9D_EVP UBISYS_P9D_EVP 3493 atdgp318 MACH_ATDGP318 ATDGP318 3494 +m28evk MACH_M28EVK M28EVK 3613 smdk4212 MACH_SMDK4212 SMDK4212 3638 smdk4412 MACH_SMDK4412 SMDK4412 3765 -- cgit v0.10.2 From e4b3bbe31d9a1e9540c6e9c95f5e7fd92acbcacf Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Fri, 11 Nov 2011 20:11:14 +0800 Subject: ARM: pxa168/gplugd: add the correct SSP device There is no SSP0, but SSP1 is used on gplugd as an I2S port. Acked-by: Tanmay Upadhyay Signed-off-by: Eric Miao diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index 6915656..4665767 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -182,7 +182,7 @@ static void __init gplugd_init(void) /* on-chip devices */ pxa168_add_uart(3); - pxa168_add_ssp(0); + pxa168_add_ssp(1); pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info)); pxa168_add_eth(&gplugd_eth_platform_data); -- cgit v0.10.2 From 396464dfbba8f734c57346489b871e7ed64dcdd1 Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Mon, 14 Nov 2011 15:20:49 +0900 Subject: drm/exynos: Add disable of manager Signed-off-by: Joonyoung Shim Signed-off-by: Inki Dae diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h index 2d74f85..5e02e6e 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h @@ -147,12 +147,14 @@ struct exynos_drm_display_ops { * @mode_set: convert drm_display_mode to hw specific display mode and * would be called by encoder->mode_set(). * @commit: set current hw specific display mode to hw. + * @disable: disable hardware specific display mode. * @enable_vblank: specific driver callback for enabling vblank interrupt. * @disable_vblank: specific driver callback for disabling vblank interrupt. */ struct exynos_drm_manager_ops { void (*mode_set)(struct device *subdrv_dev, void *mode); void (*commit)(struct device *subdrv_dev); + void (*disable)(struct device *subdrv_dev); int (*enable_vblank)(struct device *subdrv_dev); void (*disable_vblank)(struct device *subdrv_dev); }; diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.c b/drivers/gpu/drm/exynos/exynos_drm_encoder.c index 866f419..1530614 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_encoder.c +++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.c @@ -53,9 +53,27 @@ static void exynos_drm_encoder_dpms(struct drm_encoder *encoder, int mode) struct drm_device *dev = encoder->dev; struct drm_connector *connector; struct exynos_drm_manager *manager = exynos_drm_get_manager(encoder); + struct exynos_drm_manager_ops *manager_ops = manager->ops; DRM_DEBUG_KMS("%s, encoder dpms: %d\n", __FILE__, mode); + switch (mode) { + case DRM_MODE_DPMS_ON: + if (manager_ops && manager_ops->commit) + manager_ops->commit(manager->dev); + break; + case DRM_MODE_DPMS_STANDBY: + case DRM_MODE_DPMS_SUSPEND: + case DRM_MODE_DPMS_OFF: + /* TODO */ + if (manager_ops && manager_ops->disable) + manager_ops->disable(manager->dev); + break; + default: + DRM_ERROR("unspecified mode %d\n", mode); + break; + } + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { if (connector->encoder == encoder) { struct exynos_drm_display_ops *display_ops = diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 272c3b5..db3b3d9 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -177,6 +177,40 @@ static void fimd_commit(struct device *dev) writel(val, ctx->regs + VIDCON0); } +static void fimd_disable(struct device *dev) +{ + struct fimd_context *ctx = get_fimd_context(dev); + struct exynos_drm_subdrv *subdrv = &ctx->subdrv; + struct drm_device *drm_dev = subdrv->drm_dev; + struct exynos_drm_manager *manager = &subdrv->manager; + u32 val; + + DRM_DEBUG_KMS("%s\n", __FILE__); + + /* fimd dma off */ + val = readl(ctx->regs + VIDCON0); + val &= ~(VIDCON0_ENVID | VIDCON0_ENVID_F); + writel(val, ctx->regs + VIDCON0); + + /* + * if vblank is enabled status with dma off then + * it disables vsync interrupt. + */ + if (drm_dev->vblank_enabled[manager->pipe] && + atomic_read(&drm_dev->vblank_refcount[manager->pipe])) { + drm_vblank_put(drm_dev, manager->pipe); + + /* + * if vblank_disable_allowed is 0 then disable + * vsync interrupt right now else the vsync interrupt + * would be disabled by drm timer once a current process + * gives up ownershop of vblank event. + */ + if (!drm_dev->vblank_disable_allowed) + drm_vblank_off(drm_dev, manager->pipe); + } +} + static int fimd_enable_vblank(struct device *dev) { struct fimd_context *ctx = get_fimd_context(dev); @@ -220,6 +254,7 @@ static void fimd_disable_vblank(struct device *dev) static struct exynos_drm_manager_ops fimd_manager_ops = { .commit = fimd_commit, + .disable = fimd_disable, .enable_vblank = fimd_enable_vblank, .disable_vblank = fimd_disable_vblank, }; @@ -447,9 +482,6 @@ static void fimd_win_commit(struct device *dev) static void fimd_win_disable(struct device *dev) { struct fimd_context *ctx = get_fimd_context(dev); - struct exynos_drm_subdrv *subdrv = &ctx->subdrv; - struct drm_device *drm_dev = subdrv->drm_dev; - struct exynos_drm_manager *manager = &subdrv->manager; int win = ctx->default_win; u32 val; @@ -473,29 +505,6 @@ static void fimd_win_disable(struct device *dev) val &= ~SHADOWCON_CHx_ENABLE(win); val &= ~SHADOWCON_WINx_PROTECT(win); writel(val, ctx->regs + SHADOWCON); - - /* fimd dma off. */ - val = readl(ctx->regs + VIDCON0); - val &= ~(VIDCON0_ENVID | VIDCON0_ENVID_F); - writel(val, ctx->regs + VIDCON0); - - /* - * if vblank is enabled status with dma off then - * it disables vsync interrupt. - */ - if (drm_dev->vblank_enabled[manager->pipe] && - atomic_read(&drm_dev->vblank_refcount[manager->pipe])) { - drm_vblank_put(drm_dev, manager->pipe); - - /* - * if vblank_disable_allowed is 0 then disable vsync interrupt - * right now else the vsync interrupt would be disabled by drm - * timer once a current process gives up ownershop of - * vblank event. - */ - if (!drm_dev->vblank_disable_allowed) - drm_vblank_off(drm_dev, manager->pipe); - } } static struct exynos_drm_overlay_ops fimd_overlay_ops = { -- cgit v0.10.2 From ca22e3cc25f180859561f36d51bf21278db5ae11 Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Tue, 15 Nov 2011 16:25:39 +0900 Subject: drm/exynos: fixed wrong err ptr usage and destroy call in exeception - exynos_drm_buf_create() returns err pointer so NULL check is wrong. - Case that exynos_gem_obj is not created, destroy call in exception handle lable uses this pointer. so instead buffer is directly used. Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.c b/drivers/gpu/drm/exynos/exynos_drm_gem.c index b1b94b1..aba0fe4 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.c @@ -128,30 +128,25 @@ struct exynos_drm_gem_obj *exynos_drm_gem_create(struct drm_device *dev, struct exynos_drm_gem_obj *exynos_gem_obj = NULL; struct exynos_drm_gem_buf *buffer; - int ret; size = roundup(size, PAGE_SIZE); DRM_DEBUG_KMS("%s: size = 0x%lx\n", __FILE__, size); buffer = exynos_drm_buf_create(dev, size); - if (!buffer) - return ERR_PTR(-ENOMEM); + if (IS_ERR(buffer)) { + return ERR_CAST(buffer); + } exynos_gem_obj = exynos_drm_gem_init(dev, file_priv, handle, size); if (IS_ERR(exynos_gem_obj)) { - ret = PTR_ERR(exynos_gem_obj); - goto err_gem_init; + exynos_drm_buf_destroy(dev, buffer); + return exynos_gem_obj; } exynos_gem_obj->buffer = buffer; return exynos_gem_obj; - -err_gem_init: - exynos_drm_buf_destroy(dev, exynos_gem_obj->buffer); - - return ERR_PTR(ret); } int exynos_drm_gem_create_ioctl(struct drm_device *dev, void *data, -- cgit v0.10.2 From 832dd3c17f7829fe8e4c257531d6c5c9e19bd7ac Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 1 Nov 2011 19:34:06 -0700 Subject: drm/i915: Move common PCH_PP_CONTROL setup to ironlake_get_pp_control Every usage of PCH_PP_CONTROL sets the PANEL_UNLOCK_REGS value to ensure that writes will be respected, move this to a common function to make the driver cleaner. No functional changes. Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 7259034..efe5f9e 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -906,6 +906,19 @@ static void ironlake_wait_panel_off(struct intel_dp *intel_dp) msleep(delay); } +/* Read the current pp_control value, unlocking the register if it + * is locked + */ + +static u32 ironlake_get_pp_control(struct drm_i915_private *dev_priv) +{ + u32 control = I915_READ(PCH_PP_CONTROL); + + control &= ~PANEL_UNLOCK_MASK; + control |= PANEL_UNLOCK_REGS; + return control; +} + static void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp) { struct drm_device *dev = intel_dp->base.base.dev; @@ -926,9 +939,7 @@ static void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp) } ironlake_wait_panel_off(intel_dp); - pp = I915_READ(PCH_PP_CONTROL); - pp &= ~PANEL_UNLOCK_MASK; - pp |= PANEL_UNLOCK_REGS; + pp = ironlake_get_pp_control(dev_priv); pp |= EDP_FORCE_VDD; I915_WRITE(PCH_PP_CONTROL, pp); POSTING_READ(PCH_PP_CONTROL); @@ -951,9 +962,7 @@ static void ironlake_panel_vdd_off_sync(struct intel_dp *intel_dp) u32 pp; if (!intel_dp->want_panel_vdd && ironlake_edp_have_panel_vdd(intel_dp)) { - pp = I915_READ(PCH_PP_CONTROL); - pp &= ~PANEL_UNLOCK_MASK; - pp |= PANEL_UNLOCK_REGS; + pp = ironlake_get_pp_control(dev_priv); pp &= ~EDP_FORCE_VDD; I915_WRITE(PCH_PP_CONTROL, pp); POSTING_READ(PCH_PP_CONTROL); @@ -1012,9 +1021,7 @@ static void ironlake_edp_panel_on(struct intel_dp *intel_dp) return; ironlake_wait_panel_off(intel_dp); - pp = I915_READ(PCH_PP_CONTROL); - pp &= ~PANEL_UNLOCK_MASK; - pp |= PANEL_UNLOCK_REGS; + pp = ironlake_get_pp_control(dev_priv); if (IS_GEN5(dev)) { /* ILK workaround: disable reset around power sequence */ @@ -1049,9 +1056,7 @@ static void ironlake_edp_panel_off(struct drm_encoder *encoder) if (!is_edp(intel_dp)) return; - pp = I915_READ(PCH_PP_CONTROL); - pp &= ~PANEL_UNLOCK_MASK; - pp |= PANEL_UNLOCK_REGS; + pp = ironlake_get_pp_control(dev_priv); if (IS_GEN5(dev)) { /* ILK workaround: disable reset around power sequence */ @@ -1098,9 +1103,7 @@ static void ironlake_edp_backlight_on(struct intel_dp *intel_dp) * allowing it to appear. */ msleep(intel_dp->backlight_on_delay); - pp = I915_READ(PCH_PP_CONTROL); - pp &= ~PANEL_UNLOCK_MASK; - pp |= PANEL_UNLOCK_REGS; + pp = ironlake_get_pp_control(dev_priv); pp |= EDP_BLC_ENABLE; I915_WRITE(PCH_PP_CONTROL, pp); POSTING_READ(PCH_PP_CONTROL); @@ -1116,9 +1119,7 @@ static void ironlake_edp_backlight_off(struct intel_dp *intel_dp) return; DRM_DEBUG_KMS("\n"); - pp = I915_READ(PCH_PP_CONTROL); - pp &= ~PANEL_UNLOCK_MASK; - pp |= PANEL_UNLOCK_REGS; + pp = ironlake_get_pp_control(dev_priv); pp &= ~EDP_BLC_ENABLE; I915_WRITE(PCH_PP_CONTROL, pp); POSTING_READ(PCH_PP_CONTROL); -- cgit v0.10.2 From 93f62dad5ffe0962d83772fd16c0c1a9dd69767d Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 1 Nov 2011 19:45:03 -0700 Subject: drm/i915: Remove link_status field from intel_dp structure No persistent data was ever stored here, so link_status is instead allocated on the stack as needed. Signed-off-by: Keith Packard Reviewed-by: Jesse Barnes diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index efe5f9e..2c0c482 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -58,7 +58,6 @@ struct intel_dp { struct i2c_algo_dp_aux_data algo; bool is_pch_edp; uint8_t train_set[4]; - uint8_t link_status[DP_LINK_STATUS_SIZE]; int panel_power_up_delay; int panel_power_down_delay; int panel_power_cycle_delay; @@ -1285,11 +1284,11 @@ intel_dp_aux_native_read_retry(struct intel_dp *intel_dp, uint16_t address, * link status information */ static bool -intel_dp_get_link_status(struct intel_dp *intel_dp) +intel_dp_get_link_status(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE]) { return intel_dp_aux_native_read_retry(intel_dp, DP_LANE0_1_STATUS, - intel_dp->link_status, + link_status, DP_LINK_STATUS_SIZE); } @@ -1301,27 +1300,25 @@ intel_dp_link_status(uint8_t link_status[DP_LINK_STATUS_SIZE], } static uint8_t -intel_get_adjust_request_voltage(uint8_t link_status[DP_LINK_STATUS_SIZE], +intel_get_adjust_request_voltage(uint8_t adjust_request[2], int lane) { - int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1); int s = ((lane & 1) ? DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT : DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT); - uint8_t l = intel_dp_link_status(link_status, i); + uint8_t l = adjust_request[lane>>1]; return ((l >> s) & 3) << DP_TRAIN_VOLTAGE_SWING_SHIFT; } static uint8_t -intel_get_adjust_request_pre_emphasis(uint8_t link_status[DP_LINK_STATUS_SIZE], +intel_get_adjust_request_pre_emphasis(uint8_t adjust_request[2], int lane) { - int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1); int s = ((lane & 1) ? DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT : DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT); - uint8_t l = intel_dp_link_status(link_status, i); + uint8_t l = adjust_request[lane>>1]; return ((l >> s) & 3) << DP_TRAIN_PRE_EMPHASIS_SHIFT; } @@ -1362,15 +1359,18 @@ intel_dp_pre_emphasis_max(uint8_t voltage_swing) } static void -intel_get_adjust_train(struct intel_dp *intel_dp) +intel_get_adjust_train(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE]) { + struct drm_device *dev = intel_dp->base.base.dev; uint8_t v = 0; uint8_t p = 0; int lane; + uint8_t *adjust_request = link_status + (DP_ADJUST_REQUEST_LANE0_1 - DP_LANE0_1_STATUS); + int voltage_max; for (lane = 0; lane < intel_dp->lane_count; lane++) { - uint8_t this_v = intel_get_adjust_request_voltage(intel_dp->link_status, lane); - uint8_t this_p = intel_get_adjust_request_pre_emphasis(intel_dp->link_status, lane); + uint8_t this_v = intel_get_adjust_request_voltage(adjust_request, lane); + uint8_t this_p = intel_get_adjust_request_pre_emphasis(adjust_request, lane); if (this_v > v) v = this_v; @@ -1389,7 +1389,7 @@ intel_get_adjust_train(struct intel_dp *intel_dp) } static uint32_t -intel_dp_signal_levels(uint8_t train_set, int lane_count) +intel_dp_signal_levels(uint8_t train_set) { uint32_t signal_levels = 0; @@ -1458,9 +1458,8 @@ static uint8_t intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane) { - int i = DP_LANE0_1_STATUS + (lane >> 1); int s = (lane & 1) * 4; - uint8_t l = intel_dp_link_status(link_status, i); + uint8_t l = link_status[lane>>1]; return (l >> s) & 0xf; } @@ -1485,18 +1484,18 @@ intel_clock_recovery_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count DP_LANE_CHANNEL_EQ_DONE|\ DP_LANE_SYMBOL_LOCKED) static bool -intel_channel_eq_ok(struct intel_dp *intel_dp) +intel_channel_eq_ok(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE]) { uint8_t lane_align; uint8_t lane_status; int lane; - lane_align = intel_dp_link_status(intel_dp->link_status, + lane_align = intel_dp_link_status(link_status, DP_LANE_ALIGN_STATUS_UPDATED); if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0) return false; for (lane = 0; lane < intel_dp->lane_count; lane++) { - lane_status = intel_get_lane_status(intel_dp->link_status, lane); + lane_status = intel_get_lane_status(link_status, lane); if ((lane_status & CHANNEL_EQ_BITS) != CHANNEL_EQ_BITS) return false; } @@ -1569,12 +1568,14 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) clock_recovery = false; for (;;) { /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */ + uint8_t link_status[DP_LINK_STATUS_SIZE]; uint32_t signal_levels; if (IS_GEN6(dev) && is_edp(intel_dp)) { signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; } else { - signal_levels = intel_dp_signal_levels(intel_dp->train_set[0], intel_dp->lane_count); + signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]); + DRM_DEBUG_KMS("training pattern 1 signal levels %08x\n", signal_levels); DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; } @@ -1590,10 +1591,13 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) /* Set training pattern 1 */ udelay(100); - if (!intel_dp_get_link_status(intel_dp)) + if (!intel_dp_get_link_status(intel_dp, link_status)) { + DRM_ERROR("failed to get link status\n"); break; + } - if (intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) { + if (intel_clock_recovery_ok(link_status, intel_dp->lane_count)) { + DRM_DEBUG_KMS("clock recovery OK\n"); clock_recovery = true; break; } @@ -1615,7 +1619,7 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; /* Compute new intel_dp->train_set as requested by target */ - intel_get_adjust_train(intel_dp); + intel_get_adjust_train(intel_dp, link_status); } intel_dp->DP = DP; @@ -1638,6 +1642,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) for (;;) { /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */ uint32_t signal_levels; + uint8_t link_status[DP_LINK_STATUS_SIZE]; if (cr_tries > 5) { DRM_ERROR("failed to train DP, aborting\n"); @@ -1649,7 +1654,8 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; } else { - signal_levels = intel_dp_signal_levels(intel_dp->train_set[0], intel_dp->lane_count); + signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]); + DRM_DEBUG_KMS("training pattern 1 signal levels %08x\n", signal_levels); DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; } @@ -1665,17 +1671,17 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) break; udelay(400); - if (!intel_dp_get_link_status(intel_dp)) + if (!intel_dp_get_link_status(intel_dp, link_status)) break; /* Make sure clock is still ok */ - if (!intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) { + if (!intel_clock_recovery_ok(link_status, intel_dp->lane_count)) { intel_dp_start_link_train(intel_dp); cr_tries++; continue; } - if (intel_channel_eq_ok(intel_dp)) { + if (intel_channel_eq_ok(intel_dp, link_status)) { channel_eq = true; break; } @@ -1690,7 +1696,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) } /* Compute new intel_dp->train_set as requested by target */ - intel_get_adjust_train(intel_dp); + intel_get_adjust_train(intel_dp, link_status); ++tries; } @@ -1822,6 +1828,7 @@ static void intel_dp_check_link_status(struct intel_dp *intel_dp) { u8 sink_irq_vector; + u8 link_status[DP_LINK_STATUS_SIZE]; if (intel_dp->dpms_mode != DRM_MODE_DPMS_ON) return; @@ -1830,7 +1837,7 @@ intel_dp_check_link_status(struct intel_dp *intel_dp) return; /* Try to read receiver status if the link appears to be up */ - if (!intel_dp_get_link_status(intel_dp)) { + if (!intel_dp_get_link_status(intel_dp, link_status)) { intel_dp_link_down(intel_dp); return; } @@ -1855,7 +1862,7 @@ intel_dp_check_link_status(struct intel_dp *intel_dp) DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n"); } - if (!intel_channel_eq_ok(intel_dp)) { + if (!intel_channel_eq_ok(intel_dp, link_status)) { DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n", drm_get_encoder_name(&intel_dp->base.base)); intel_dp_start_link_train(intel_dp); -- cgit v0.10.2 From 417e822deee1d2bcd8a8a60660c40a0903713f2b Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 1 Nov 2011 19:54:11 -0700 Subject: drm/i915: Treat PCH eDP like DP in most places PCH eDP has many of the same needs as regular PCH DP connections, including the DP_CTl bit settings, the TRANS_DP_CTL register. Signed-off-by: Keith Packard Reviewed-by: Jesse Barnes diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 591eb0ed..e77a863 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2933,7 +2933,8 @@ static void ironlake_pch_enable(struct drm_crtc *crtc) /* For PCH DP, enable TRANS_DP_CTL */ if (HAS_PCH_CPT(dev) && - intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) { + (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) || + intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) { u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) >> 5; reg = TRANS_DP_CTL(pipe); temp = I915_READ(reg); diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 2c0c482..d1eabd4 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -766,10 +766,10 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, continue; intel_dp = enc_to_intel_dp(encoder); - if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT) { + if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT || is_pch_edp(intel_dp)) { lane_count = intel_dp->lane_count; break; - } else if (is_edp(intel_dp)) { + } else if (is_cpu_edp(intel_dp)) { lane_count = dev_priv->edp.lanes; break; } @@ -808,6 +808,7 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; struct intel_dp *intel_dp = enc_to_intel_dp(encoder); struct drm_crtc *crtc = intel_dp->base.base.crtc; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); @@ -820,18 +821,31 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, ironlake_edp_pll_off(encoder); } - intel_dp->DP = DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0; - intel_dp->DP |= intel_dp->color_range; + /* + * There are three kinds of DP registers: + * + * IBX PCH + * CPU + * CPT PCH + * + * IBX PCH and CPU are the same for almost everything, + * except that the CPU DP PLL is configured in this + * register + * + * CPT PCH is quite different, having many bits moved + * to the TRANS_DP_CTL register instead. That + * configuration happens (oddly) in ironlake_pch_enable + */ - if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) - intel_dp->DP |= DP_SYNC_HS_HIGH; - if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) - intel_dp->DP |= DP_SYNC_VS_HIGH; + /* Preserve the BIOS-computed detected bit. This is + * supposed to be read-only. + */ + intel_dp->DP = I915_READ(intel_dp->output_reg) & DP_DETECTED; + intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0; - if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) - intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT; - else - intel_dp->DP |= DP_LINK_TRAIN_OFF; + /* Handle DP bits in common between all three register formats */ + + intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0; switch (intel_dp->lane_count) { case 1: @@ -850,32 +864,45 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE; intel_write_eld(encoder, adjusted_mode); } - memset(intel_dp->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE); intel_dp->link_configuration[0] = intel_dp->link_bw; intel_dp->link_configuration[1] = intel_dp->lane_count; intel_dp->link_configuration[8] = DP_SET_ANSI_8B10B; - /* * Check for DPCD version > 1.1 and enhanced framing support */ if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 && (intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP)) { intel_dp->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN; - intel_dp->DP |= DP_ENHANCED_FRAMING; } - /* CPT DP's pipe select is decided in TRANS_DP_CTL */ - if (intel_crtc->pipe == 1 && !HAS_PCH_CPT(dev)) - intel_dp->DP |= DP_PIPEB_SELECT; + /* Split out the IBX/CPU vs CPT settings */ - if (is_cpu_edp(intel_dp)) { - /* don't miss out required setting for eDP */ - intel_dp->DP |= DP_PLL_ENABLE; - if (adjusted_mode->clock < 200000) - intel_dp->DP |= DP_PLL_FREQ_160MHZ; - else - intel_dp->DP |= DP_PLL_FREQ_270MHZ; + if (!HAS_PCH_CPT(dev) || is_cpu_edp(intel_dp)) { + intel_dp->DP |= intel_dp->color_range; + + if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) + intel_dp->DP |= DP_SYNC_HS_HIGH; + if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) + intel_dp->DP |= DP_SYNC_VS_HIGH; + intel_dp->DP |= DP_LINK_TRAIN_OFF; + + if (intel_dp->link_configuration[1] & DP_LANE_COUNT_ENHANCED_FRAME_EN) + intel_dp->DP |= DP_ENHANCED_FRAMING; + + if (intel_crtc->pipe == 1) + intel_dp->DP |= DP_PIPEB_SELECT; + + if (is_cpu_edp(intel_dp)) { + /* don't miss out required setting for eDP */ + intel_dp->DP |= DP_PLL_ENABLE; + if (adjusted_mode->clock < 200000) + intel_dp->DP |= DP_PLL_FREQ_160MHZ; + else + intel_dp->DP |= DP_PLL_FREQ_270MHZ; + } + } else { + intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT; } } @@ -1341,6 +1368,7 @@ static char *link_train_names[] = { * a maximum voltage of 800mV and a maximum pre-emphasis of 6dB */ #define I830_DP_VOLTAGE_MAX DP_TRAIN_VOLTAGE_SWING_800 +#define I830_DP_VOLTAGE_MAX_CPT DP_TRAIN_VOLTAGE_SWING_1200 static uint8_t intel_dp_pre_emphasis_max(uint8_t voltage_swing) @@ -1378,8 +1406,12 @@ intel_get_adjust_train(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_ST p = this_p; } - if (v >= I830_DP_VOLTAGE_MAX) - v = I830_DP_VOLTAGE_MAX | DP_TRAIN_MAX_SWING_REACHED; + if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) + voltage_max = I830_DP_VOLTAGE_MAX_CPT; + else + voltage_max = I830_DP_VOLTAGE_MAX; + if (v >= voltage_max) + v = voltage_max | DP_TRAIN_MAX_SWING_REACHED; if (p >= intel_dp_pre_emphasis_max(v)) p = intel_dp_pre_emphasis_max(v) | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED; @@ -1570,7 +1602,8 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */ uint8_t link_status[DP_LINK_STATUS_SIZE]; uint32_t signal_levels; - if (IS_GEN6(dev) && is_edp(intel_dp)) { + + if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) { signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; } else { @@ -1650,12 +1683,11 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) break; } - if (IS_GEN6(dev) && is_edp(intel_dp)) { + if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) { signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; } else { signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]); - DRM_DEBUG_KMS("training pattern 1 signal levels %08x\n", signal_levels); DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; } @@ -1741,8 +1773,12 @@ intel_dp_link_down(struct intel_dp *intel_dp) msleep(17); - if (is_edp(intel_dp)) - DP |= DP_LINK_TRAIN_OFF; + if (is_edp(intel_dp)) { + if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) + DP |= DP_LINK_TRAIN_OFF_CPT; + else + DP |= DP_LINK_TRAIN_OFF; + } if (!HAS_PCH_CPT(dev) && I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) { @@ -2186,7 +2222,8 @@ intel_trans_dp_port_sel(struct drm_crtc *crtc) continue; intel_dp = enc_to_intel_dp(encoder); - if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT) + if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT || + intel_dp->base.type == INTEL_OUTPUT_EDP) return intel_dp->output_reg; } -- cgit v0.10.2 From 99ea7127a30bda29354e1ed3a75d80d5f9cfc2a7 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 1 Nov 2011 19:57:50 -0700 Subject: drm/i915: Let panel power sequencing hardware do its job The panel power sequencing hardware tracks the stages of panel power sequencing and signals when the panel is completely on or off. Instead of blindly assuming the panel timings will work, poll the panel power status register until it shows the correct values. Signed-off-by: Keith Packard Reviewed-by: Jesse Barnes diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index a34e866..b080cc8 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1553,12 +1553,21 @@ */ #define PP_READY (1 << 30) #define PP_SEQUENCE_NONE (0 << 28) -#define PP_SEQUENCE_ON (1 << 28) -#define PP_SEQUENCE_OFF (2 << 28) -#define PP_SEQUENCE_MASK 0x30000000 +#define PP_SEQUENCE_POWER_UP (1 << 28) +#define PP_SEQUENCE_POWER_DOWN (2 << 28) +#define PP_SEQUENCE_MASK (3 << 28) +#define PP_SEQUENCE_SHIFT 28 #define PP_CYCLE_DELAY_ACTIVE (1 << 27) -#define PP_SEQUENCE_STATE_ON_IDLE (1 << 3) #define PP_SEQUENCE_STATE_MASK 0x0000000f +#define PP_SEQUENCE_STATE_OFF_IDLE (0x0 << 0) +#define PP_SEQUENCE_STATE_OFF_S0_1 (0x1 << 0) +#define PP_SEQUENCE_STATE_OFF_S0_2 (0x2 << 0) +#define PP_SEQUENCE_STATE_OFF_S0_3 (0x3 << 0) +#define PP_SEQUENCE_STATE_ON_IDLE (0x8 << 0) +#define PP_SEQUENCE_STATE_ON_S1_0 (0x9 << 0) +#define PP_SEQUENCE_STATE_ON_S1_2 (0xa << 0) +#define PP_SEQUENCE_STATE_ON_S1_3 (0xb << 0) +#define PP_SEQUENCE_STATE_RESET (0xf << 0) #define PP_CONTROL 0x61204 #define POWER_TARGET_ON (1 << 0) #define PP_ON_DELAYS 0x61208 diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index d1eabd4..5610610 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -66,7 +66,6 @@ struct intel_dp { struct drm_display_mode *panel_fixed_mode; /* for eDP */ struct delayed_work panel_vdd_work; bool want_panel_vdd; - unsigned long panel_off_jiffies; }; /** @@ -906,32 +905,53 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, } } -static void ironlake_wait_panel_off(struct intel_dp *intel_dp) +#define IDLE_ON_MASK (PP_ON | 0 | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK) +#define IDLE_ON_VALUE (PP_ON | 0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_ON_IDLE) + +#define IDLE_OFF_MASK (PP_ON | 0 | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK) +#define IDLE_OFF_VALUE (0 | 0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_OFF_IDLE) + +#define IDLE_CYCLE_MASK (PP_ON | 0 | PP_SEQUENCE_MASK | PP_CYCLE_DELAY_ACTIVE | PP_SEQUENCE_STATE_MASK) +#define IDLE_CYCLE_VALUE (0 | 0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_OFF_IDLE) + +static void ironlake_wait_panel_status(struct intel_dp *intel_dp, + u32 mask, + u32 value) { - unsigned long off_time; - unsigned long delay; + struct drm_device *dev = intel_dp->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; - DRM_DEBUG_KMS("Wait for panel power off time\n"); + DRM_DEBUG_KMS("mask %08x value %08x status %08x control %08x\n", + mask, value, + I915_READ(PCH_PP_STATUS), + I915_READ(PCH_PP_CONTROL)); - if (ironlake_edp_have_panel_power(intel_dp) || - ironlake_edp_have_panel_vdd(intel_dp)) - { - DRM_DEBUG_KMS("Panel still on, no delay needed\n"); - return; + if (_wait_for((I915_READ(PCH_PP_STATUS) & mask) == value, 5000, 10)) { + DRM_ERROR("Panel status timeout: status %08x control %08x\n", + I915_READ(PCH_PP_STATUS), + I915_READ(PCH_PP_CONTROL)); } +} - off_time = intel_dp->panel_off_jiffies + msecs_to_jiffies(intel_dp->panel_power_down_delay); - if (time_after(jiffies, off_time)) { - DRM_DEBUG_KMS("Time already passed"); - return; - } - delay = jiffies_to_msecs(off_time - jiffies); - if (delay > intel_dp->panel_power_down_delay) - delay = intel_dp->panel_power_down_delay; - DRM_DEBUG_KMS("Waiting an additional %ld ms\n", delay); - msleep(delay); +static void ironlake_wait_panel_on(struct intel_dp *intel_dp) +{ + DRM_DEBUG_KMS("Wait for panel power on\n"); + ironlake_wait_panel_status(intel_dp, IDLE_ON_MASK, IDLE_ON_VALUE); } +static void ironlake_wait_panel_off(struct intel_dp *intel_dp) +{ + DRM_DEBUG_KMS("Wait for panel power off time\n"); + ironlake_wait_panel_status(intel_dp, IDLE_OFF_MASK, IDLE_OFF_VALUE); +} + +static void ironlake_wait_panel_power_cycle(struct intel_dp *intel_dp) +{ + DRM_DEBUG_KMS("Wait for panel power cycle\n"); + ironlake_wait_panel_status(intel_dp, IDLE_CYCLE_MASK, IDLE_CYCLE_VALUE); +} + + /* Read the current pp_control value, unlocking the register if it * is locked */ @@ -959,12 +979,15 @@ static void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp) "eDP VDD already requested on\n"); intel_dp->want_panel_vdd = true; + if (ironlake_edp_have_panel_vdd(intel_dp)) { DRM_DEBUG_KMS("eDP VDD already on\n"); return; } - ironlake_wait_panel_off(intel_dp); + if (!ironlake_edp_have_panel_power(intel_dp)) + ironlake_wait_panel_power_cycle(intel_dp); + pp = ironlake_get_pp_control(dev_priv); pp |= EDP_FORCE_VDD; I915_WRITE(PCH_PP_CONTROL, pp); @@ -996,7 +1019,8 @@ static void ironlake_panel_vdd_off_sync(struct intel_dp *intel_dp) /* Make sure sequencer is idle before allowing subsequent activity */ DRM_DEBUG_KMS("PCH_PP_STATUS: 0x%08x PCH_PP_CONTROL: 0x%08x\n", I915_READ(PCH_PP_STATUS), I915_READ(PCH_PP_CONTROL)); - intel_dp->panel_off_jiffies = jiffies; + + msleep(intel_dp->panel_power_down_delay); } } @@ -1034,21 +1058,25 @@ static void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync) } } -/* Returns true if the panel was already on when called */ static void ironlake_edp_panel_on(struct intel_dp *intel_dp) { struct drm_device *dev = intel_dp->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - u32 pp, idle_on_mask = PP_ON | PP_SEQUENCE_STATE_ON_IDLE; + u32 pp; if (!is_edp(intel_dp)) return; - if (ironlake_edp_have_panel_power(intel_dp)) + + DRM_DEBUG_KMS("Turn eDP power on\n"); + + if (ironlake_edp_have_panel_power(intel_dp)) { + DRM_DEBUG_KMS("eDP power already on\n"); return; + } - ironlake_wait_panel_off(intel_dp); - pp = ironlake_get_pp_control(dev_priv); + ironlake_wait_panel_power_cycle(intel_dp); + pp = ironlake_get_pp_control(dev_priv); if (IS_GEN5(dev)) { /* ILK workaround: disable reset around power sequence */ pp &= ~PANEL_POWER_RESET; @@ -1057,13 +1085,13 @@ static void ironlake_edp_panel_on(struct intel_dp *intel_dp) } pp |= POWER_TARGET_ON; + if (!IS_GEN5(dev)) + pp |= PANEL_POWER_RESET; + I915_WRITE(PCH_PP_CONTROL, pp); POSTING_READ(PCH_PP_CONTROL); - if (wait_for((I915_READ(PCH_PP_STATUS) & idle_on_mask) == idle_on_mask, - 5000)) - DRM_ERROR("panel on wait timed out: 0x%08x\n", - I915_READ(PCH_PP_STATUS)); + ironlake_wait_panel_on(intel_dp); if (IS_GEN5(dev)) { pp |= PANEL_POWER_RESET; /* restore panel reset bit */ @@ -1072,44 +1100,25 @@ static void ironlake_edp_panel_on(struct intel_dp *intel_dp) } } -static void ironlake_edp_panel_off(struct drm_encoder *encoder) +static void ironlake_edp_panel_off(struct intel_dp *intel_dp) { - struct intel_dp *intel_dp = enc_to_intel_dp(encoder); - struct drm_device *dev = encoder->dev; + struct drm_device *dev = intel_dp->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - u32 pp, idle_off_mask = PP_ON | PP_SEQUENCE_MASK | - PP_CYCLE_DELAY_ACTIVE | PP_SEQUENCE_STATE_MASK; + u32 pp; if (!is_edp(intel_dp)) return; - pp = ironlake_get_pp_control(dev_priv); - if (IS_GEN5(dev)) { - /* ILK workaround: disable reset around power sequence */ - pp &= ~PANEL_POWER_RESET; - I915_WRITE(PCH_PP_CONTROL, pp); - POSTING_READ(PCH_PP_CONTROL); - } - - intel_dp->panel_off_jiffies = jiffies; + DRM_DEBUG_KMS("Turn eDP power off\n"); - if (IS_GEN5(dev)) { - pp &= ~POWER_TARGET_ON; - I915_WRITE(PCH_PP_CONTROL, pp); - POSTING_READ(PCH_PP_CONTROL); - pp &= ~POWER_TARGET_ON; - I915_WRITE(PCH_PP_CONTROL, pp); - POSTING_READ(PCH_PP_CONTROL); - msleep(intel_dp->panel_power_cycle_delay); + WARN(intel_dp->want_panel_vdd, "Cannot turn power off while VDD is on\n"); - if (wait_for((I915_READ(PCH_PP_STATUS) & idle_off_mask) == 0, 5000)) - DRM_ERROR("panel off wait timed out: 0x%08x\n", - I915_READ(PCH_PP_STATUS)); + pp = ironlake_get_pp_control(dev_priv); + pp &= ~(POWER_TARGET_ON | EDP_FORCE_VDD | PANEL_POWER_RESET | EDP_BLC_ENABLE); + I915_WRITE(PCH_PP_CONTROL, pp); + POSTING_READ(PCH_PP_CONTROL); - pp |= PANEL_POWER_RESET; /* restore panel reset bit */ - I915_WRITE(PCH_PP_CONTROL, pp); - POSTING_READ(PCH_PP_CONTROL); - } + ironlake_wait_panel_off(intel_dp); } static void ironlake_edp_backlight_on(struct intel_dp *intel_dp) @@ -1223,7 +1232,7 @@ static void intel_dp_prepare(struct drm_encoder *encoder) */ ironlake_edp_backlight_off(intel_dp); intel_dp_link_down(intel_dp); - ironlake_edp_panel_off(encoder); + ironlake_edp_panel_off(intel_dp); } static void intel_dp_commit(struct drm_encoder *encoder) @@ -1237,7 +1246,6 @@ static void intel_dp_commit(struct drm_encoder *encoder) intel_dp_start_link_train(intel_dp); ironlake_edp_panel_on(intel_dp); ironlake_edp_panel_vdd_off(intel_dp, true); - intel_dp_complete_link_train(intel_dp); ironlake_edp_backlight_on(intel_dp); @@ -1261,7 +1269,7 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) ironlake_edp_backlight_off(intel_dp); intel_dp_sink_dpms(intel_dp, mode); intel_dp_link_down(intel_dp); - ironlake_edp_panel_off(encoder); + ironlake_edp_panel_off(intel_dp); if (is_edp(intel_dp) && !is_pch_edp(intel_dp)) ironlake_edp_pll_off(encoder); ironlake_edp_panel_vdd_off(intel_dp, false); @@ -2398,11 +2406,10 @@ intel_dp_init(struct drm_device *dev, int output_reg) DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n", intel_dp->backlight_on_delay, intel_dp->backlight_off_delay); - intel_dp->panel_off_jiffies = jiffies - intel_dp->panel_power_down_delay; - ironlake_edp_panel_vdd_on(intel_dp); ret = intel_dp_get_dpcd(intel_dp); ironlake_edp_panel_vdd_off(intel_dp, false); + if (ret) { if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) dev_priv->no_aux_handshake = -- cgit v0.10.2 From 21264c638b4f9179655a39436d0340bd0d4ab1de Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 1 Nov 2011 20:25:21 -0700 Subject: drm/i915: Make DP prepare/commit consistent with DP dpms Make sure the sequence of operations in all three functions makes sense: 1) The backlight must be off unless the screen is running 2) The link must be running to turn the eDP panel on/off 3) The CPU eDP PLL must be running until everything is off Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 5610610..8e37fdd 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1222,17 +1222,18 @@ static void intel_dp_prepare(struct drm_encoder *encoder) { struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + ironlake_edp_backlight_off(intel_dp); + ironlake_edp_panel_off(intel_dp); + /* Wake up the sink first */ ironlake_edp_panel_vdd_on(intel_dp); intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); + intel_dp_link_down(intel_dp); ironlake_edp_panel_vdd_off(intel_dp, false); /* Make sure the panel is off before trying to * change the mode */ - ironlake_edp_backlight_off(intel_dp); - intel_dp_link_down(intel_dp); - ironlake_edp_panel_off(intel_dp); } static void intel_dp_commit(struct drm_encoder *encoder) @@ -1264,16 +1265,20 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) uint32_t dp_reg = I915_READ(intel_dp->output_reg); if (mode != DRM_MODE_DPMS_ON) { + ironlake_edp_backlight_off(intel_dp); + ironlake_edp_panel_off(intel_dp); + ironlake_edp_panel_vdd_on(intel_dp); - if (is_edp(intel_dp)) - ironlake_edp_backlight_off(intel_dp); intel_dp_sink_dpms(intel_dp, mode); intel_dp_link_down(intel_dp); - ironlake_edp_panel_off(intel_dp); - if (is_edp(intel_dp) && !is_pch_edp(intel_dp)) - ironlake_edp_pll_off(encoder); ironlake_edp_panel_vdd_off(intel_dp, false); + + if (is_cpu_edp(intel_dp)) + ironlake_edp_pll_off(encoder); } else { + if (is_cpu_edp(intel_dp)) + ironlake_edp_pll_on(encoder); + ironlake_edp_panel_vdd_on(intel_dp); intel_dp_sink_dpms(intel_dp, mode); if (!(dp_reg & DP_PORT_EN)) { @@ -1281,7 +1286,6 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) ironlake_edp_panel_on(intel_dp); ironlake_edp_panel_vdd_off(intel_dp, true); intel_dp_complete_link_train(intel_dp); - ironlake_edp_backlight_on(intel_dp); } else ironlake_edp_panel_vdd_off(intel_dp, false); ironlake_edp_backlight_on(intel_dp); -- cgit v0.10.2 From cdb0e95bf571dccc1f75fef9bdad21b167ef0b37 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 1 Nov 2011 20:00:06 -0700 Subject: drm/i915: Try harder during dp pattern 1 link training Instead of going through the sequence just once, run through the whole set up to 5 times to see if something can work. This isn't part of the DP spec, but the BIOS seems to do it, and given that link training failure is so bad, it seems reasonable to follow suit. Signed-off-by: Keith Packard Reviewed-by: Jesse Barnes diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 8e37fdd..7101b8b 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1581,7 +1581,7 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) int i; uint8_t voltage; bool clock_recovery = false; - int tries; + int voltage_tries, loop_tries; u32 reg; uint32_t DP = intel_dp->DP; @@ -1608,7 +1608,8 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) DP &= ~DP_LINK_TRAIN_MASK; memset(intel_dp->train_set, 0, 4); voltage = 0xff; - tries = 0; + voltage_tries = 0; + loop_tries = 0; clock_recovery = false; for (;;) { /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */ @@ -1651,16 +1652,26 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) for (i = 0; i < intel_dp->lane_count; i++) if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0) break; - if (i == intel_dp->lane_count) - break; + if (i == intel_dp->lane_count) { + ++loop_tries; + if (loop_tries == 5) { + DRM_DEBUG_KMS("too many full retries, give up\n"); + break; + } + memset(intel_dp->train_set, 0, 4); + voltage_tries = 0; + continue; + } /* Check to see if we've tried the same voltage 5 times */ if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) { - ++tries; - if (tries == 5) + ++voltage_tries; + if (voltage_tries == 5) { + DRM_DEBUG_KMS("too many voltage retries, give up\n"); break; + } } else - tries = 0; + voltage_tries = 0; voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; /* Compute new intel_dp->train_set as requested by target */ -- cgit v0.10.2 From f2e8b18af95358cf5407bf263cba04fc4c379123 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 1 Nov 2011 20:01:35 -0700 Subject: drm/i915: Remove trailing white space Found a couple of bare tabs in intel_dp.c Signed-off-by: Keith Packard Reviewed-by: Jesse Barnes diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 7101b8b..7bdf77e 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1042,7 +1042,7 @@ static void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync) DRM_DEBUG_KMS("Turn eDP VDD off %d\n", intel_dp->want_panel_vdd); WARN(!intel_dp->want_panel_vdd, "eDP VDD not forced on"); - + intel_dp->want_panel_vdd = false; if (sync) { @@ -2388,7 +2388,7 @@ intel_dp_init(struct drm_device *dev, int output_reg) cur.t8 = (pp_on & PANEL_LIGHT_ON_DELAY_MASK) >> PANEL_LIGHT_ON_DELAY_SHIFT; - + cur.t9 = (pp_off & PANEL_LIGHT_OFF_DELAY_MASK) >> PANEL_LIGHT_OFF_DELAY_SHIFT; -- cgit v0.10.2 From b34f1f0931575bf1e1483472a5202b8247fa9b10 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Wed, 2 Nov 2011 10:17:59 -0700 Subject: drm/i915: Initiate DP link training only on the lanes we'll be using Limit the link training setting command to the lanes needed for the current mode. It seems vaguely possible that a monitor will try to train the other lanes and fail in some way, so this seems like the safer plan. Signed-off-by: Keith Packard Reviewed-by: Jesse Barnes diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 7bdf77e..8c3819b 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1564,8 +1564,9 @@ intel_dp_set_link_train(struct intel_dp *intel_dp, ret = intel_dp_aux_native_write(intel_dp, DP_TRAINING_LANE0_SET, - intel_dp->train_set, 4); - if (ret != 4) + intel_dp->train_set, + intel_dp->lane_count); + if (ret != intel_dp->lane_count) return false; return true; -- cgit v0.10.2 From 9a10f401a401ca69c6537641c8fc0d6b57b5aee8 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Wed, 2 Nov 2011 13:03:47 -0700 Subject: drm/i915: Use DPCD value for max DP lanes. The BIOS VBT value for an eDP panel has been shown to be incorrect on one machine, and we haven't found any machines where the DPCD value was wrong, so we'll use the DPCD value everywhere. Signed-off-by: Keith Packard Reviewed-by: Adam Jackson Reviewed-by: Jesse Barnes diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 8c3819b..ec28aeb 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -154,16 +154,12 @@ intel_edp_link_config(struct intel_encoder *intel_encoder, static int intel_dp_max_lane_count(struct intel_dp *intel_dp) { - int max_lane_count = 4; - - if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) { - max_lane_count = intel_dp->dpcd[DP_MAX_LANE_COUNT] & 0x1f; - switch (max_lane_count) { - case 1: case 2: case 4: - break; - default: - max_lane_count = 4; - } + int max_lane_count = intel_dp->dpcd[DP_MAX_LANE_COUNT] & 0x1f; + switch (max_lane_count) { + case 1: case 2: case 4: + break; + default: + max_lane_count = 4; } return max_lane_count; } @@ -765,12 +761,11 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, continue; intel_dp = enc_to_intel_dp(encoder); - if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT || is_pch_edp(intel_dp)) { + if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT || + intel_dp->base.type == INTEL_OUTPUT_EDP) + { lane_count = intel_dp->lane_count; break; - } else if (is_cpu_edp(intel_dp)) { - lane_count = dev_priv->edp.lanes; - break; } } -- cgit v0.10.2 From ff956135008bca99b5e38f48f0d10a2c04fef2d6 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 15 Nov 2011 21:00:56 -0600 Subject: [libata] ahci_platform: fix DT probing The change in commit 904c04feaf13ed "ahci_platform: Add the board_ids..." doesn't work for the DT probing case as platform_get_device_id returns NULL. Pick the default ahci_port_info in this case. Signed-off-by: Rob Herring Acked-by: Anton Vorontsov Cc: Richard Zhu Cc: linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Jeff Garzik diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index ec55595..43b8758 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -67,7 +67,7 @@ static int __init ahci_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct ahci_platform_data *pdata = dev_get_platdata(dev); const struct platform_device_id *id = platform_get_device_id(pdev); - struct ata_port_info pi = ahci_port_info[id->driver_data]; + struct ata_port_info pi = ahci_port_info[id ? id->driver_data : 0]; const struct ata_port_info *ppi[] = { &pi, NULL }; struct ahci_host_priv *hpriv; struct ata_host *host; -- cgit v0.10.2 From aab9440453d19c1885fa391d4aafd7705f316247 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sun, 13 Nov 2011 01:30:56 +0400 Subject: libata: fix build without BMDMA fix these errors: drivers/ata/libata-sff.c:2538:3: error: implicit declaration of function 'ata_pci_bmdma_prepare_host' drivers/ata/libata-sff.c:2549:40: error: 'ata_bmdma_interrupt' undeclared (first use in this function) Signed-off-by: Alexander Beregalov Signed-off-by: Jeff Garzik diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 63d5327..4cadfa2 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -2533,10 +2533,12 @@ static int ata_pci_init_one(struct pci_dev *pdev, if (rc) goto out; +#ifdef CONFIG_ATA_BMDMA if (bmdma) /* prepare and activate BMDMA host */ rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host); else +#endif /* prepare and activate SFF host */ rc = ata_pci_sff_prepare_host(pdev, ppi, &host); if (rc) @@ -2544,10 +2546,12 @@ static int ata_pci_init_one(struct pci_dev *pdev, host->private_data = host_priv; host->flags |= hflags; +#ifdef CONFIG_ATA_BMDMA if (bmdma) { pci_set_master(pdev); rc = ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht); } else +#endif rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht); out: if (rc == 0) -- cgit v0.10.2 From fc9f899483435935c1cd7005df29681929d1c99b Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 9 Jul 2011 18:04:39 +0200 Subject: fs/ocfs2/dlm/dlmlock.c: free kmem_cache_zalloc'd data using kmem_cache_free Memory allocated using kmem_cache_zalloc should be freed using kmem_cache_free, not kfree. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression x,e,e1,e2; @@ x = kmem_cache_zalloc(e1,e2) ... when != x = e ?-kfree(x) +kmem_cache_free(e1,x) // Signed-off-by: Julia Lawall Signed-off-by: Joel Becker diff --git a/fs/ocfs2/dlm/dlmlock.c b/fs/ocfs2/dlm/dlmlock.c index f32fcba..975810b 100644 --- a/fs/ocfs2/dlm/dlmlock.c +++ b/fs/ocfs2/dlm/dlmlock.c @@ -438,7 +438,7 @@ struct dlm_lock * dlm_new_lock(int type, u8 node, u64 cookie, /* zero memory only if kernel-allocated */ lksb = kzalloc(sizeof(*lksb), GFP_NOFS); if (!lksb) { - kfree(lock); + kmem_cache_free(dlm_lock_cache, lock); return NULL; } kernel_allocated = 1; -- cgit v0.10.2 From 8298524803339a9a8df053ebdfebc2975ec55be9 Mon Sep 17 00:00:00 2001 From: Wengang Wang Date: Tue, 12 Jul 2011 16:43:14 +0800 Subject: ocfs2: make direntry invalid when deleting it When we deleting a direntry from a directory, if it's the first in a block we invalid it by setting inode to 0; otherwise, we merge the deleted one to the prior and contiguous direntry. And we don't truncate directories. There is a problem for the later case since inode is not set to 0. This problem happens when the caller passes a file position as parameter to ocfs2_dir_foreach_blk(). If the position happens to point to a stale(not the first, deleted in betweens of ocfs2_dir_foreach_blk()s) direntry, we are not able to recognize its staleness. So that we treat it as a live one wrongly. The fix is to set inode to 0 in both cases indicating the direntry is stale. This won't introduce additional IOs. Signed-off-by: Wengang Wang Signed-off-by: Joel Becker diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c index 8582e3f..3302088 100644 --- a/fs/ocfs2/dir.c +++ b/fs/ocfs2/dir.c @@ -1184,8 +1184,7 @@ static int __ocfs2_delete_entry(handle_t *handle, struct inode *dir, if (pde) le16_add_cpu(&pde->rec_len, le16_to_cpu(de->rec_len)); - else - de->inode = 0; + de->inode = 0; dir->i_version++; ocfs2_journal_dirty(handle, bh); goto bail; -- cgit v0.10.2 From b8a0ae579fb8d9b21008ac386be08b9428902455 Mon Sep 17 00:00:00 2001 From: Wengang Wang Date: Wed, 12 Oct 2011 15:22:15 +0800 Subject: ocfs2: Commit transactions in error cases -v2 There are three cases found that in error cases, journal transactions are not committed nor aborted. We should take care of these case by committing the transactions. Otherwise, there would left a journal handle which will lead to , in same process context, the comming ocfs2_start_trans() gets wrong credits. Signed-off-by: Wengang Wang Signed-off-by: Joel Becker diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c index ed553c6..3165aeb 100644 --- a/fs/ocfs2/alloc.c +++ b/fs/ocfs2/alloc.c @@ -5699,7 +5699,7 @@ int ocfs2_remove_btree_range(struct inode *inode, OCFS2_JOURNAL_ACCESS_WRITE); if (ret) { mlog_errno(ret); - goto out; + goto out_commit; } dquot_free_space_nodirty(inode, diff --git a/fs/ocfs2/ioctl.c b/fs/ocfs2/ioctl.c index d9a6ce7..726ff26 100644 --- a/fs/ocfs2/ioctl.c +++ b/fs/ocfs2/ioctl.c @@ -122,7 +122,7 @@ static int ocfs2_set_inode_attr(struct inode *inode, unsigned flags, if ((oldflags & OCFS2_IMMUTABLE_FL) || ((flags ^ oldflags) & (OCFS2_APPEND_FL | OCFS2_IMMUTABLE_FL))) { if (!capable(CAP_LINUX_IMMUTABLE)) - goto bail_unlock; + goto bail_commit; } ocfs2_inode->ip_attr = flags; @@ -132,6 +132,7 @@ static int ocfs2_set_inode_attr(struct inode *inode, unsigned flags, if (status < 0) mlog_errno(status); +bail_commit: ocfs2_commit_trans(osb, handle); bail_unlock: ocfs2_inode_unlock(inode, 1); diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 81ecf9c..93d6c80 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -2376,16 +2376,18 @@ static int ocfs2_remove_value_outside(struct inode*inode, } ret = ocfs2_xattr_value_truncate(inode, vb, 0, &ctxt); - if (ret < 0) { - mlog_errno(ret); - break; - } ocfs2_commit_trans(osb, ctxt.handle); if (ctxt.meta_ac) { ocfs2_free_alloc_context(ctxt.meta_ac); ctxt.meta_ac = NULL; } + + if (ret < 0) { + mlog_errno(ret); + break; + } + } if (ctxt.meta_ac) -- cgit v0.10.2 From e41d33af7c037a6f7350f8410b45ce83b50d1b80 Mon Sep 17 00:00:00 2001 From: Dan Magenheimer Date: Mon, 17 Oct 2011 16:47:17 -0700 Subject: ocfs2: send correct UUID to cleancache initialization ocfs2: Fix cleancache initialization call to correctly pass uuid As reported by Steven Whitehouse in https://lkml.org/lkml/2011/5/27/221 the ocfs2 volume UUID is incorrectly passed to cleancache. As a result, shared-ephemeral tmem pools will not actually be created; instead they will be private (unshared) which misses out on a major benefit of tmem. Reported-by: Steven Whitehouse Signed-off-by: Dan Magenheimer Signed-off-by: Joel Becker diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index 938e2b2..4994f8b 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -2360,7 +2360,7 @@ static int ocfs2_initialize_super(struct super_block *sb, mlog_errno(status); goto bail; } - cleancache_init_shared_fs((char *)&uuid_net_key, sb); + cleancache_init_shared_fs((char *)&di->id2.i_super.s_uuid, sb); bail: return status; -- cgit v0.10.2 From 0393afea31874947b1d149b82d17b7dccac4f210 Mon Sep 17 00:00:00 2001 From: "Xiaowei.Hu" Date: Wed, 19 Oct 2011 09:34:19 +0800 Subject: ocfs2: Add a missing journal credit in ocfs2_link_credits() -v2 With indexed_dir enabled, ocfs2 maintains a list of dirblocks having space. The credit calculation in ocfs2_link_credits() did not correctly account for adding an entry that exactly fills a dirblock that triggers removing that dirblock by changing the pointer in the previous block in the list. The credit calculation did not account for that previous block. To expose, do: mkfs.ocfs2 -b 512 -M local /dev/sdX mount /dev/sdX /ocfs2 mkdir /ocfs2/linkdir touch /ocfs2/linkdir/file1 for i in `seq 1 29` ; do link /ocfs2/linkdir/file1 /ocfs2/linkdir/linklinklinklinklinklink$i; done rm -f /ocfs2/linkdir/linklinklinklinklinklink10 sleep 8 link /ocfs2/linkdir/file1 /ocfs2/linkdir/linklinklinklinklinklinkaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa Note: The link names have been crafted for a 512 byte blocksize. Reproducing with a larger blocksize will require longer (or more) links. The sleep is important. We want jbd2 to commit the transaction so that the missing block does not piggy back on account of the previous transaction. Signed-off-by: XiaoweiHu Reviewed-by: WengangWang Reviewed-by: Sunil.Mushran Signed-off-by: Joel Becker diff --git a/fs/ocfs2/journal.h b/fs/ocfs2/journal.h index 68cf2f6..a3385b6 100644 --- a/fs/ocfs2/journal.h +++ b/fs/ocfs2/journal.h @@ -441,10 +441,11 @@ static inline int ocfs2_mknod_credits(struct super_block *sb, int is_dir, #define OCFS2_SIMPLE_DIR_EXTEND_CREDITS (2) /* file update (nlink, etc) + directory mtime/ctime + dir entry block + quota - * update on dir + index leaf + dx root update for free list */ + * update on dir + index leaf + dx root update for free list + + * previous dirblock update in the free list */ static inline int ocfs2_link_credits(struct super_block *sb) { - return 2*OCFS2_INODE_UPDATE_CREDITS + 3 + + return 2*OCFS2_INODE_UPDATE_CREDITS + 4 + ocfs2_quota_trans_credits(sb); } -- cgit v0.10.2 From df295d4a4b3c98af1a2445a82aef169e7e5d96b8 Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Wed, 16 Nov 2011 12:03:10 -0800 Subject: ocfs2: honor O_(D)SYNC flag in fallocate We need to sync the transaction which updates i_size if the file is marked as needing sync semantics. Signed-off-by: Mark Fasheh Signed-off-by: Joel Becker diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 5c4a74e..09e3de5 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -1950,6 +1950,9 @@ static int __ocfs2_change_file_space(struct file *file, struct inode *inode, if (ret < 0) mlog_errno(ret); + if (file->f_flags & O_SYNC) + handle->h_sync = 1; + ocfs2_commit_trans(osb, handle); out_inode_unlock: -- cgit v0.10.2 From 249ec93c01db8898058899a80ffb537c8d27f86f Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Tue, 8 Nov 2011 00:20:39 +0100 Subject: ocfs2: Use filemap_write_and_wait() instead of write_inode_now() Since ocfs2 has no ->write_inode method, there's no point in calling write_inode_now() from ocfs2_cleanup_delete_inode(). Use filemap_write_and_wait() instead. This helps us to cleanup inode writing interfaces... Signed-off-by: Jan Kara Signed-off-by: Joel Becker diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c index b4c8bb6..c4bf6ac 100644 --- a/fs/ocfs2/inode.c +++ b/fs/ocfs2/inode.c @@ -951,7 +951,7 @@ static void ocfs2_cleanup_delete_inode(struct inode *inode, trace_ocfs2_cleanup_delete_inode( (unsigned long long)OCFS2_I(inode)->ip_blkno, sync_data); if (sync_data) - write_inode_now(inode, 1); + filemap_write_and_wait(inode->i_mapping); truncate_inode_pages(&inode->i_data, 0); } -- cgit v0.10.2 From f475058f48d3acb3c3979311c9532f3113839468 Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Thu, 17 Nov 2011 18:54:29 +0800 Subject: ARM: imx6q: move clock register map to machine_desc.map_io map_io is the only place to call iotable_init. Signed-off-by: Richard Zhao [shawn.guo: rename imx_clock_map_io() to imx6q_clock_map_io()] Signed-off-by: Shawn Guo diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c index 613a1b9..039a7ab 100644 --- a/arch/arm/mach-imx/clock-imx6q.c +++ b/arch/arm/mach-imx/clock-imx6q.c @@ -1953,14 +1953,17 @@ static struct map_desc imx6q_clock_desc[] = { imx_map_entry(MX6Q, ANATOP, MT_DEVICE), }; +void __init imx6q_clock_map_io(void) +{ + iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc)); +} + int __init mx6q_clocks_init(void) { struct device_node *np; void __iomem *base; int i, irq; - iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc)); - /* retrieve the freqency of fixed clocks from device tree */ for_each_compatible_node(np, NULL, "fixed-clock") { u32 rate; diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 8bf5fa3..9cd860a 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -34,6 +34,7 @@ static void __init imx6q_map_io(void) { imx_lluart_map_io(); imx_scu_map_io(); + imx6q_clock_map_io(); } static void __init imx6q_gpio_add_irq_domain(struct device_node *np, diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 83b745a..7a5b6af 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -133,4 +133,5 @@ extern void imx53_qsb_common_init(void); extern void imx53_smd_common_init(void); extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode); extern void imx6q_pm_init(void); +extern void imx6q_clock_map_io(void); #endif -- cgit v0.10.2 From 1df647197c5b8aacaeb58592cba9a1df322c9000 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Sun, 13 Nov 2011 19:47:32 -0600 Subject: writeback: hard throttle 1000+ dd on a slow USB stick The sleep based balance_dirty_pages() can pause at most MAX_PAUSE=200ms on every 1 4KB-page, which means it cannot throttle a task under 4KB/200ms=20KB/s. So when there are more than 512 dd writing to a 10MB/s USB stick, its bdi dirty pages could grow out of control. Even if we can increase MAX_PAUSE, the minimal (task_ratelimit = 1) means a limit of 4KB/s. They can eventually be safeguarded by the global limit check (nr_dirty < dirty_thresh). However if someone is also writing to an HDD at the same time, it'll get poor HDD write performance. We at least want to maintain good write performance for other devices when one device is attacked by some "massive parallel" workload, or suffers from slow write bandwidth, or somehow get stalled due to some error condition (eg. NFS server not responding). For a stalled device, we need to completely block its dirtiers, too, before its bdi dirty pages grow all the way up to the global limit and leave no space for the other functional devices. So change the loop exit condition to /* * Always enforce global dirty limit; also enforce bdi dirty limit * if the normal max_pause sleeps cannot keep things under control. */ if (nr_dirty < dirty_thresh && (bdi_dirty < bdi_thresh || bdi->dirty_ratelimit > 1)) break; which can be further simplified to if (task_ratelimit) break; Signed-off-by: Wu Fengguang diff --git a/mm/page-writeback.c b/mm/page-writeback.c index 79c3441..e7cb5ff 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -1136,14 +1136,11 @@ pause: __set_current_state(TASK_KILLABLE); io_schedule_timeout(pause); - dirty_thresh = hard_dirty_limit(dirty_thresh); /* - * max-pause area. If dirty exceeded but still within this - * area, no need to sleep for more than 200ms: (a) 8 pages per - * 200ms is typically more than enough to curb heavy dirtiers; - * (b) the pause time limit makes the dirtiers more responsive. + * This is typically equal to (nr_dirty < dirty_thresh) and can + * also keep "1000+ dd on a slow USB stick" under control. */ - if (nr_dirty < dirty_thresh) + if (task_ratelimit) break; if (fatal_signal_pending(current)) -- cgit v0.10.2 From 468e6a20afaccb67e2a7d7f60d301f90e1c6f301 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Wed, 7 Sep 2011 10:41:32 -0600 Subject: writeback: remove vm_dirties and task->dirties They are not used any more. Signed-off-by: Wu Fengguang diff --git a/include/linux/init_task.h b/include/linux/init_task.h index 08ffab0..94b1e35 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -184,7 +184,6 @@ extern struct cred init_cred; [PIDTYPE_SID] = INIT_PID_LINK(PIDTYPE_SID), \ }, \ .thread_group = LIST_HEAD_INIT(tsk.thread_group), \ - .dirties = INIT_PROP_LOCAL_SINGLE(dirties), \ INIT_IDS \ INIT_PERF_EVENTS(tsk) \ INIT_TRACE_IRQFLAGS \ diff --git a/include/linux/sched.h b/include/linux/sched.h index 68daf4f..1c4f3e9 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1521,7 +1521,6 @@ struct task_struct { #ifdef CONFIG_FAULT_INJECTION int make_it_fail; #endif - struct prop_local_single dirties; /* * when (nr_dirtied >= nr_dirtied_pause), it's time to call * balance_dirty_pages() for some dirty throttling pause diff --git a/kernel/fork.c b/kernel/fork.c index ba0d172..da4a6a1 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -162,7 +162,6 @@ static void account_kernel_stack(struct thread_info *ti, int account) void free_task(struct task_struct *tsk) { - prop_local_destroy_single(&tsk->dirties); account_kernel_stack(tsk->stack, -1); free_thread_info(tsk->stack); rt_mutex_debug_task_free(tsk); @@ -274,10 +273,6 @@ static struct task_struct *dup_task_struct(struct task_struct *orig) tsk->stack = ti; - err = prop_local_init_single(&tsk->dirties); - if (err) - goto out; - setup_thread_stack(tsk, orig); clear_user_return_notifier(tsk); clear_tsk_need_resched(tsk); diff --git a/mm/page-writeback.c b/mm/page-writeback.c index e7cb5ff..7125248 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -128,7 +128,6 @@ unsigned long global_dirty_limit; * */ static struct prop_descriptor vm_completions; -static struct prop_descriptor vm_dirties; /* * couple the period to the dirty_ratio: @@ -154,7 +153,6 @@ static void update_completion_period(void) { int shift = calc_period_shift(); prop_change_shift(&vm_completions, shift); - prop_change_shift(&vm_dirties, shift); writeback_set_ratelimit(); } @@ -235,11 +233,6 @@ void bdi_writeout_inc(struct backing_dev_info *bdi) } EXPORT_SYMBOL_GPL(bdi_writeout_inc); -void task_dirty_inc(struct task_struct *tsk) -{ - prop_inc_single(&vm_dirties, &tsk->dirties); -} - /* * Obtain an accurate fraction of the BDI's portion. */ @@ -1395,7 +1388,6 @@ void __init page_writeback_init(void) shift = calc_period_shift(); prop_descriptor_init(&vm_completions, shift); - prop_descriptor_init(&vm_dirties, shift); } /** @@ -1724,7 +1716,6 @@ void account_page_dirtied(struct page *page, struct address_space *mapping) __inc_zone_page_state(page, NR_DIRTIED); __inc_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE); __inc_bdi_stat(mapping->backing_dev_info, BDI_DIRTIED); - task_dirty_inc(current); task_io_account_write(PAGE_CACHE_SIZE); } } -- cgit v0.10.2 From bce34d14428d35d9a06ddc10cd46ecef311764c9 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 17 Nov 2011 15:05:14 +0000 Subject: ARM: perf: initialise used_mask for fake PMU during validation When validating an event group, we call pmu->get_event_idx for each group member in order to check that the group can be scheduled as a unit on an empty PMU. As a result of 3fc2c830 ("ARM: perf: remove event limit from pmu_hw_events"), the used_mask member of struct cpu_hw_events must be setup explicitly, something which we don't do for the fake cpu_hw_events used for validation. This patch sets up an empty used_mask for the fake validation cpu_hw_events, preventing NULL deferences when trying to get the event index. Reported-by: Pawel Moll Signed-off-by: Will Deacon diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 24e2347..e508066 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -343,8 +343,14 @@ validate_group(struct perf_event *event) { struct perf_event *sibling, *leader = event->group_leader; struct pmu_hw_events fake_pmu; + DECLARE_BITMAP(fake_used_mask, ARMPMU_MAX_HWEVENTS); - memset(&fake_pmu, 0, sizeof(fake_pmu)); + /* + * Initialise the fake PMU. We only need to populate the + * used_mask for the purposes of validation. + */ + memset(fake_used_mask, 0, sizeof(fake_used_mask)); + fake_pmu.used_mask = fake_used_mask; if (!validate_event(&fake_pmu, leader)) return -ENOSPC; -- cgit v0.10.2 From 2ed0e645f358c26f4f4a7aed56a9488db0020ad1 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Wed, 16 Nov 2011 12:27:39 +0000 Subject: genirq: Don't allow per cpu interrupts to be suspended The power management functions related to interrupts do not know (yet) about per-cpu interrupts and end up calling the wrong low-level methods to enable/disable interrupts. This leads to all kind of interesting issues (action taken on one CPU only, updating a refcount which is not used otherwise...). The workaround for the time being is simply to flag these interrupts with IRQF_NO_SUSPEND. At least on ARM, these interrupts are actually dealt with at the architecture level. Reported-by: Santosh Shilimkar Tested-by: Santosh Shilimkar Signed-off-by: Marc Zyngier Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1321446459-31409-1-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index 67ce837..0e2b179 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -1596,7 +1596,7 @@ int request_percpu_irq(unsigned int irq, irq_handler_t handler, return -ENOMEM; action->handler = handler; - action->flags = IRQF_PERCPU; + action->flags = IRQF_PERCPU | IRQF_NO_SUSPEND; action->name = devname; action->percpu_dev_id = dev_id; -- cgit v0.10.2 From 2391a0e06789a3f1718dee30b282562f7ed28c87 Mon Sep 17 00:00:00 2001 From: Timo Juhani Lindfors Date: Thu, 17 Nov 2011 02:52:50 +0200 Subject: ASoC: wm8753: Skip noop reconfiguration of DAI mode This patch makes it possible to set DAI mode to its currently applied value even if codec is active. This is necessary to allow aplay -t raw -r 44100 -f S16_LE -c 2 < /dev/urandom & alsactl store -f backup.state alsactl restore -f backup.state to work without returning errors. This patch is based on a patch sent by Klaus Kurzmann . Signed-off-by: Timo Juhani Lindfors Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c index a950471..3a629d0 100644 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c @@ -190,6 +190,9 @@ static int wm8753_set_dai(struct snd_kcontrol *kcontrol, struct wm8753_priv *wm8753 = snd_soc_codec_get_drvdata(codec); u16 ioctl; + if (wm8753->dai_func == ucontrol->value.integer.value[0]) + return 0; + if (codec->active) return -EBUSY; -- cgit v0.10.2 From df92d0561de364de53c42abc5d43e04ab6f326a5 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 16 Nov 2011 16:27:07 +0100 Subject: TTY: ldisc, allow waiting for ldisc arbitrarily long To fix a nasty bug in ldisc hup vs. reinit we need to wait infinitely long for ldisc to be gone. So here we add a parameter to tty_ldisc_wait_idle to allow that. This is only a preparation for the real fix which is done in the following patches. Signed-off-by: Jiri Slaby Cc: Dave Young Cc: Dave Jones Cc: Ben Hutchings Cc: Dmitriy Matrosov Cc: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 512c49f..534d176 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -547,15 +547,16 @@ static void tty_ldisc_flush_works(struct tty_struct *tty) /** * tty_ldisc_wait_idle - wait for the ldisc to become idle * @tty: tty to wait for + * @timeout: for how long to wait at most * * Wait for the line discipline to become idle. The discipline must * have been halted for this to guarantee it remains idle. */ -static int tty_ldisc_wait_idle(struct tty_struct *tty) +static int tty_ldisc_wait_idle(struct tty_struct *tty, long timeout) { - int ret; + long ret; ret = wait_event_timeout(tty_ldisc_idle, - atomic_read(&tty->ldisc->users) == 1, 5 * HZ); + atomic_read(&tty->ldisc->users) == 1, timeout); if (ret < 0) return ret; return ret > 0 ? 0 : -EBUSY; @@ -665,7 +666,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) tty_ldisc_flush_works(tty); - retval = tty_ldisc_wait_idle(tty); + retval = tty_ldisc_wait_idle(tty, 5 * HZ); tty_lock(); mutex_lock(&tty->ldisc_mutex); @@ -762,7 +763,7 @@ static int tty_ldisc_reinit(struct tty_struct *tty, int ldisc) if (IS_ERR(ld)) return -1; - WARN_ON_ONCE(tty_ldisc_wait_idle(tty)); + WARN_ON_ONCE(tty_ldisc_wait_idle(tty, 5 * HZ)); tty_ldisc_close(tty, tty->ldisc); tty_ldisc_put(tty->ldisc); -- cgit v0.10.2 From 300420722e0734a4254f3b634e0f82664495d210 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 16 Nov 2011 16:27:08 +0100 Subject: TTY: ldisc, move wait idle to caller It is the only place where reinit is called from. And we really need to wait for the old ldisc to go once. Actually this is the place where the waiting originally was (before removed and re-added later). This will make the fix in the following patch easier to implement. Signed-off-by: Jiri Slaby Cc: Dave Young Cc: Dave Jones Cc: Ben Hutchings Cc: Dmitriy Matrosov Cc: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 534d176..a69a755 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -763,8 +763,6 @@ static int tty_ldisc_reinit(struct tty_struct *tty, int ldisc) if (IS_ERR(ld)) return -1; - WARN_ON_ONCE(tty_ldisc_wait_idle(tty, 5 * HZ)); - tty_ldisc_close(tty, tty->ldisc); tty_ldisc_put(tty->ldisc); tty->ldisc = NULL; @@ -848,6 +846,8 @@ void tty_ldisc_hangup(struct tty_struct *tty) it means auditing a lot of other paths so this is a FIXME */ if (tty->ldisc) { /* Not yet closed */ + WARN_ON_ONCE(tty_ldisc_wait_idle(tty, 5 * HZ)); + if (reset == 0) { if (!tty_ldisc_reinit(tty, tty->termios->c_line)) -- cgit v0.10.2 From 0c73c08ec73dbe080b9ec56696ee21d32754d918 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 16 Nov 2011 16:27:09 +0100 Subject: TTY: ldisc, wait for ldisc infinitely in hangup For /dev/console case, we do not kill all ldisc users. It's due to redirected_tty_write test in __tty_hangup. In that case there still might be a process waiting e.g. in n_tty_read for input. We wait for such processes to disappear. The problem is that we use a timeout. After this timeout, we continue closing the ldisc and start freeing tty resources. It obviously leads to crashes when the other process is woken. So to fix this, we wait infinitely before reiniting the ldisc. (The tiocsetd remains untouched -- times out after 5s.) This is nicely reproducible with this run from shell: exec 0<>/dev/console 1<>/dev/console 2<>/dev/console and stopping a getty like: systemctl stop serial-getty@ttyS0.service The crash proper may be produced only under load or with constified timing the same as for 92f6fa09b. Signed-off-by: Jiri Slaby Cc: Dave Young Cc: Dave Jones Cc: Ben Hutchings Cc: Dmitriy Matrosov Cc: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index a69a755..8e0924f 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -36,6 +36,7 @@ #include #include +#include /* * This guards the refcounted line discipline lists. The lock @@ -837,7 +838,7 @@ void tty_ldisc_hangup(struct tty_struct *tty) tty_unlock(); cancel_work_sync(&tty->buf.work); mutex_unlock(&tty->ldisc_mutex); - +retry: tty_lock(); mutex_lock(&tty->ldisc_mutex); @@ -846,7 +847,21 @@ void tty_ldisc_hangup(struct tty_struct *tty) it means auditing a lot of other paths so this is a FIXME */ if (tty->ldisc) { /* Not yet closed */ - WARN_ON_ONCE(tty_ldisc_wait_idle(tty, 5 * HZ)); + if (atomic_read(&tty->ldisc->users) != 1) { + char cur_n[TASK_COMM_LEN], tty_n[64]; + long timeout = 3 * HZ; + tty_unlock(); + + while (tty_ldisc_wait_idle(tty, timeout) == -EBUSY) { + timeout = MAX_SCHEDULE_TIMEOUT; + printk_ratelimited(KERN_WARNING + "%s: waiting (%s) for %s took too long, but we keep waiting...\n", + __func__, get_task_comm(cur_n, current), + tty_name(tty, tty_n)); + } + mutex_unlock(&tty->ldisc_mutex); + goto retry; + } if (reset == 0) { -- cgit v0.10.2 From 457eafce618cf89125da9d79751d81241bd3fa34 Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Wed, 16 Nov 2011 00:49:28 +0600 Subject: drm, i915: Fix memory leak in i915_gem_busy_ioctl(). A call to i915_add_request() has been made in function i915_gem_busy_ioctl(). i915_add_request can fail, so in it's exit path previously allocated memory needs to be freed. Signed-off-by: Rakib Mullick Reviewed-by: Keith Packard Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index ed0b68f..8359dc7 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3512,9 +3512,11 @@ i915_gem_busy_ioctl(struct drm_device *dev, void *data, * so emit a request to do so. */ request = kzalloc(sizeof(*request), GFP_KERNEL); - if (request) + if (request) { ret = i915_add_request(obj->ring, NULL, request); - else + if (ret) + kfree(request); + } else ret = -ENOMEM; } -- cgit v0.10.2 From f6f8285132907757ef84ef8dae0a1244b8cde6ac Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Thu, 17 Nov 2011 12:58:07 -0800 Subject: pstore: pass allocated memory region back to caller The buf_lock cannot be held while populating the inodes, so make the backend pass forward an allocated and filled buffer instead. This solves the following backtrace. The effect is that "buf" is only ever used to notify the backends that something was written to it, and shouldn't be used in the read path. To replace the buf_lock during the read path, isolate the open/read/close loop with a separate mutex to maintain serialized access to the backend. Note that is is up to the pstore backend to cope if the (*write)() path is called in the middle of the read path. [ 59.691019] BUG: sleeping function called from invalid context at .../mm/slub.c:847 [ 59.691019] in_atomic(): 0, irqs_disabled(): 1, pid: 1819, name: mount [ 59.691019] Pid: 1819, comm: mount Not tainted 3.0.8 #1 [ 59.691019] Call Trace: [ 59.691019] [<810252d5>] __might_sleep+0xc3/0xca [ 59.691019] [<810a26e6>] kmem_cache_alloc+0x32/0xf3 [ 59.691019] [<810b53ac>] ? __d_lookup_rcu+0x6f/0xf4 [ 59.691019] [<810b68b1>] alloc_inode+0x2a/0x64 [ 59.691019] [<810b6903>] new_inode+0x18/0x43 [ 59.691019] [<81142447>] pstore_get_inode.isra.1+0x11/0x98 [ 59.691019] [<81142623>] pstore_mkfile+0xae/0x26f [ 59.691019] [<810a2a66>] ? kmem_cache_free+0x19/0xb1 [ 59.691019] [<8116c821>] ? ida_get_new_above+0x140/0x158 [ 59.691019] [<811708ea>] ? __init_rwsem+0x1e/0x2c [ 59.691019] [<810b67e8>] ? inode_init_always+0x111/0x1b0 [ 59.691019] [<8102127e>] ? should_resched+0xd/0x27 [ 59.691019] [<8137977f>] ? _cond_resched+0xd/0x21 [ 59.691019] [<81142abf>] pstore_get_records+0x52/0xa7 [ 59.691019] [<8114254b>] pstore_fill_super+0x7d/0x91 [ 59.691019] [<810a7ff5>] mount_single+0x46/0x82 [ 59.691019] [<8114231a>] pstore_mount+0x15/0x17 [ 59.691019] [<811424ce>] ? pstore_get_inode.isra.1+0x98/0x98 [ 59.691019] [<810a8199>] mount_fs+0x5a/0x12d [ 59.691019] [<810b9174>] ? alloc_vfsmnt+0xa4/0x14a [ 59.691019] [<810b9474>] vfs_kern_mount+0x4f/0x7d [ 59.691019] [<810b9d7e>] do_kern_mount+0x34/0xb2 [ 59.691019] [<810bb15f>] do_mount+0x5fc/0x64a [ 59.691019] [<810912fb>] ? strndup_user+0x2e/0x3f [ 59.691019] [<810bb3cb>] sys_mount+0x66/0x99 [ 59.691019] [<8137b537>] sysenter_do_call+0x12/0x26 Signed-off-by: Kees Cook Signed-off-by: Tony Luck diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c index 1274080..631b947 100644 --- a/drivers/acpi/apei/erst.c +++ b/drivers/acpi/apei/erst.c @@ -932,7 +932,8 @@ static int erst_check_table(struct acpi_table_erst *erst_tab) static int erst_open_pstore(struct pstore_info *psi); static int erst_close_pstore(struct pstore_info *psi); static ssize_t erst_reader(u64 *id, enum pstore_type_id *type, - struct timespec *time, struct pstore_info *psi); + struct timespec *time, char **buf, + struct pstore_info *psi); static int erst_writer(enum pstore_type_id type, u64 *id, unsigned int part, size_t size, struct pstore_info *psi); static int erst_clearer(enum pstore_type_id type, u64 id, @@ -986,17 +987,23 @@ static int erst_close_pstore(struct pstore_info *psi) } static ssize_t erst_reader(u64 *id, enum pstore_type_id *type, - struct timespec *time, struct pstore_info *psi) + struct timespec *time, char **buf, + struct pstore_info *psi) { int rc; ssize_t len = 0; u64 record_id; - struct cper_pstore_record *rcd = (struct cper_pstore_record *) - (erst_info.buf - sizeof(*rcd)); + struct cper_pstore_record *rcd; + size_t rcd_len = sizeof(*rcd) + erst_info.bufsize; if (erst_disable) return -ENODEV; + rcd = kmalloc(rcd_len, GFP_KERNEL); + if (!rcd) { + rc = -ENOMEM; + goto out; + } skip: rc = erst_get_record_id_next(&reader_pos, &record_id); if (rc) @@ -1004,22 +1011,27 @@ skip: /* no more record */ if (record_id == APEI_ERST_INVALID_RECORD_ID) { - rc = -1; + rc = -EINVAL; goto out; } - len = erst_read(record_id, &rcd->hdr, sizeof(*rcd) + - erst_info.bufsize); + len = erst_read(record_id, &rcd->hdr, rcd_len); /* The record may be cleared by others, try read next record */ if (len == -ENOENT) goto skip; - else if (len < 0) { - rc = -1; + else if (len < sizeof(*rcd)) { + rc = -EIO; goto out; } if (uuid_le_cmp(rcd->hdr.creator_id, CPER_CREATOR_PSTORE) != 0) goto skip; + *buf = kmalloc(len, GFP_KERNEL); + if (*buf == NULL) { + rc = -ENOMEM; + goto out; + } + memcpy(*buf, rcd->data, len - sizeof(*rcd)); *id = record_id; if (uuid_le_cmp(rcd->sec_hdr.section_type, CPER_SECTION_TYPE_DMESG) == 0) @@ -1037,6 +1049,7 @@ skip: time->tv_nsec = 0; out: + kfree(rcd); return (rc < 0) ? rc : (len - sizeof(*rcd)); } diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c index 8370f72..a54a6b9 100644 --- a/drivers/firmware/efivars.c +++ b/drivers/firmware/efivars.c @@ -457,7 +457,8 @@ static int efi_pstore_close(struct pstore_info *psi) } static ssize_t efi_pstore_read(u64 *id, enum pstore_type_id *type, - struct timespec *timespec, struct pstore_info *psi) + struct timespec *timespec, + char **buf, struct pstore_info *psi) { efi_guid_t vendor = LINUX_EFI_CRASH_GUID; struct efivars *efivars = psi->data; @@ -478,7 +479,11 @@ static ssize_t efi_pstore_read(u64 *id, enum pstore_type_id *type, timespec->tv_nsec = 0; get_var_data_locked(efivars, &efivars->walk_entry->var); size = efivars->walk_entry->var.DataSize; - memcpy(psi->buf, efivars->walk_entry->var.Data, size); + *buf = kmalloc(size, GFP_KERNEL); + if (*buf == NULL) + return -ENOMEM; + memcpy(*buf, efivars->walk_entry->var.Data, + size); efivars->walk_entry = list_entry(efivars->walk_entry->list.next, struct efivar_entry, list); return size; diff --git a/fs/pstore/platform.c b/fs/pstore/platform.c index 2bd620f..57bbf90 100644 --- a/fs/pstore/platform.c +++ b/fs/pstore/platform.c @@ -167,6 +167,7 @@ int pstore_register(struct pstore_info *psi) } psinfo = psi; + mutex_init(&psinfo->read_mutex); spin_unlock(&pstore_lock); if (owner && !try_module_get(owner)) { @@ -195,30 +196,32 @@ EXPORT_SYMBOL_GPL(pstore_register); void pstore_get_records(int quiet) { struct pstore_info *psi = psinfo; + char *buf = NULL; ssize_t size; u64 id; enum pstore_type_id type; struct timespec time; int failed = 0, rc; - unsigned long flags; if (!psi) return; - spin_lock_irqsave(&psinfo->buf_lock, flags); + mutex_lock(&psi->read_mutex); rc = psi->open(psi); if (rc) goto out; - while ((size = psi->read(&id, &type, &time, psi)) > 0) { - rc = pstore_mkfile(type, psi->name, id, psi->buf, (size_t)size, + while ((size = psi->read(&id, &type, &time, &buf, psi)) > 0) { + rc = pstore_mkfile(type, psi->name, id, buf, (size_t)size, time, psi); + kfree(buf); + buf = NULL; if (rc && (rc != -EEXIST || !quiet)) failed++; } psi->close(psi); out: - spin_unlock_irqrestore(&psinfo->buf_lock, flags); + mutex_unlock(&psi->read_mutex); if (failed) printk(KERN_WARNING "pstore: failed to load %d record(s) from '%s'\n", diff --git a/include/linux/pstore.h b/include/linux/pstore.h index ea56732..2ca8cde 100644 --- a/include/linux/pstore.h +++ b/include/linux/pstore.h @@ -35,10 +35,12 @@ struct pstore_info { spinlock_t buf_lock; /* serialize access to 'buf' */ char *buf; size_t bufsize; + struct mutex read_mutex; /* serialize open/read/close */ int (*open)(struct pstore_info *psi); int (*close)(struct pstore_info *psi); ssize_t (*read)(u64 *id, enum pstore_type_id *type, - struct timespec *time, struct pstore_info *psi); + struct timespec *time, char **buf, + struct pstore_info *psi); int (*write)(enum pstore_type_id type, u64 *id, unsigned int part, size_t size, struct pstore_info *psi); int (*erase)(enum pstore_type_id type, u64 id, -- cgit v0.10.2 From 04b38670cf46c096705f24e92a8747d1ab89e53c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 16 Nov 2011 10:58:03 +0100 Subject: drm/i915: Fix inconsistent backlight level during disabled When the brightness property is inquired while the backlight is disabled, the driver returns a wrong value (zero) because it probes the value after the backlight was turned off. This caused a black screen even after the backlight is enabled again. It should return the internal backlight_level instead, so that it won't be influenced by the backlight-enable state. BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=41926 BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/872652 Tested-by: Kamal Mostafa Cc: Alex Davis Cc: Signed-off-by: Takashi Iwai Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index 499d4c0..21f60b7 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -326,7 +326,8 @@ static int intel_panel_update_status(struct backlight_device *bd) static int intel_panel_get_brightness(struct backlight_device *bd) { struct drm_device *dev = bl_get_data(bd); - return intel_panel_get_backlight(dev); + struct drm_i915_private *dev_priv = dev->dev_private; + return dev_priv->backlight_level; } static const struct backlight_ops intel_panel_bl_ops = { -- cgit v0.10.2 From d004e024058a0eaca097513ce62cbcf978913e0a Mon Sep 17 00:00:00 2001 From: Hector Palacios Date: Mon, 14 Nov 2011 11:15:25 +0100 Subject: timekeeping: add arch_offset hook to ktime_get functions ktime_get and ktime_get_ts were calling timekeeping_get_ns() but later they were not calling arch_gettimeoffset() so architectures using this mechanism returned 0 ns when calling these functions. This happened for example when running Busybox's ping which calls syscall(__NR_clock_gettime, CLOCK_MONOTONIC, ts) which eventually calls ktime_get. As a result the returned ping travel time was zero. CC: stable@kernel.org Signed-off-by: Hector Palacios Signed-off-by: John Stultz diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index e9f60d3..2378413 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -249,6 +249,8 @@ ktime_t ktime_get(void) secs = xtime.tv_sec + wall_to_monotonic.tv_sec; nsecs = xtime.tv_nsec + wall_to_monotonic.tv_nsec; nsecs += timekeeping_get_ns(); + /* If arch requires, add in gettimeoffset() */ + nsecs += arch_gettimeoffset(); } while (read_seqretry(&xtime_lock, seq)); /* @@ -280,6 +282,8 @@ void ktime_get_ts(struct timespec *ts) *ts = xtime; tomono = wall_to_monotonic; nsecs = timekeeping_get_ns(); + /* If arch requires, add in gettimeoffset() */ + nsecs += arch_gettimeoffset(); } while (read_seqretry(&xtime_lock, seq)); -- cgit v0.10.2 From ef319c6e095676e0247fd24ef8ff7f085c19744f Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 20 Oct 2011 13:36:59 +0300 Subject: OMAPDSS: HDMI: fix returned HDMI pixel clock hdmi_get_pixel_clock() returns the pixel clock in Hz, but the pck is stored as kHz. This means the return value has to be multiplied by 1000, not by 10000 as the code did. Signed-off-by: Tomi Valkeinen diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c index 3262f0f..c56378c 100644 --- a/drivers/video/omap2/dss/hdmi.c +++ b/drivers/video/omap2/dss/hdmi.c @@ -269,7 +269,7 @@ static void update_hdmi_timings(struct hdmi_config *cfg, unsigned long hdmi_get_pixel_clock(void) { /* HDMI Pixel Clock in Mhz */ - return hdmi.ip_data.cfg.timings.timings.pixel_clock * 10000; + return hdmi.ip_data.cfg.timings.timings.pixel_clock * 1000; } static void hdmi_compute_pll(struct omap_dss_device *dssdev, int phy, -- cgit v0.10.2 From 1c6bc899723ca8c0d58044c3661f13ac2369e55f Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 8 Nov 2011 09:54:50 +0200 Subject: OMAPFB: fix compilation warnings due to missing include Fix warnings similar to this by including module.h: drivers/video/omap/dispc.c:276:1: warning: data definition has no type or storage class drivers/video/omap/dispc.c:276:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' Signed-off-by: Tomi Valkeinen diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c index 0ccd7ad..6f61e78 100644 --- a/drivers/video/omap/dispc.c +++ b/drivers/video/omap/dispc.c @@ -19,6 +19,7 @@ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include +#include #include #include #include -- cgit v0.10.2 From f95cb5ebd834117ff4829a460656095a0ae63921 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 1 Nov 2011 10:50:45 +0200 Subject: OMAPDSS: DISPC: skip scaling calculations when not scaling Current code calculates scaling factors for video overlays even when the overlays are not scaled. Change the code to skip calculations when not scaling. This optimizes the code a bit, but also fixes a problem when configuring an overlay for a disabled display: if the display is disabled we don't necessarily know the pixel clock used when the display is enabled, and in some cases (like HDMI) the pixel clock is set to zero until a proper video mode is set later. A wrong pixel clock will mess up the scaling calculations, causing an error like: omapdss DISPC error: failed to set up scaling, required fclk rate = 0 Hz, current fclk rate = 170666666 Hz A proper fix would be to check later whether the clocks are enough for the scaling, at the point when the overlay or display is actually enabled, but this patch removes the problem for now. Signed-off-by: Tomi Valkeinen diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c index 3532782..5c81533 100644 --- a/drivers/video/omap2/dss/dispc.c +++ b/drivers/video/omap2/dss/dispc.c @@ -1720,12 +1720,11 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane, const int maxdownscale = dss_feat_get_param_max(FEAT_PARAM_DOWNSCALE); unsigned long fclk = 0; - if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) { - if (width != out_width || height != out_height) - return -EINVAL; - else - return 0; - } + if (width == out_width && height == out_height) + return 0; + + if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) + return -EINVAL; if (out_width < width / maxdownscale || out_width > width * 8) -- cgit v0.10.2 From f9dfb65b055c56678afa03e13e942761459ea53d Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Fri, 18 Nov 2011 17:05:30 +0530 Subject: ktest: Check parent options for iterated tests Let's say we have "OUTPUT_DIR = build/${TEST_NAME}", and we're iterating a test. In the second iteration of a test, the TEST_NAME of the test we're repeating is not used. Instead, ${TEST_NAME} appears literally: touch /home/rabin/kernel/test/build/${TEST_NAME}/.config ... SUCCESS Fix this by making __eval_option() check the parent test options for a repeated test. Link: http://lkml.kernel.org/r/1321616131-21352-2-git-send-email-rabin@rab.in Signed-off-by: Rabin Vincent Signed-off-by: Steven Rostedt diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 30e2bef..8b4c253 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -747,6 +747,18 @@ sub __eval_option { # Add space to evaluate the character before $ $option = " $option"; my $retval = ""; + my $repeated = 0; + my $parent = 0; + + foreach my $test (keys %repeat_tests) { + if ($i >= $test && + $i < $test + $repeat_tests{$test}) { + + $repeated = 1; + $parent = $test; + last; + } + } while ($option =~ /(.*?[^\\])\$\{(.*?)\}(.*)/) { my $start = $1; @@ -760,10 +772,14 @@ sub __eval_option { # otherwise see if the default OPT (without [$i]) exists. my $o = "$var\[$i\]"; + my $parento = "$var\[$parent\]"; if (defined($opt{$o})) { $o = $opt{$o}; $retval = "$retval$o"; + } elsif ($repeated && defined($opt{$parento})) { + $o = $opt{$parento}; + $retval = "$retval$o"; } elsif (defined($opt{$var})) { $o = $opt{$var}; $retval = "$retval$o"; -- cgit v0.10.2 From 91a13c281d7d4648c0b32dede11a0144c4e7984c Mon Sep 17 00:00:00 2001 From: Claudio Scordino Date: Thu, 17 Nov 2011 11:08:32 +0100 Subject: drivers/base/node.c: fix compilation error with older versions of gcc Patch to fix the error message "directives may not be used inside a macro argument" which appears when the kernel is compiled for the cris architecture. Signed-off-by: Claudio Scordino Acked-by: David Rientjes Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/base/node.c b/drivers/base/node.c index 793f796..5693ece 100644 --- a/drivers/base/node.c +++ b/drivers/base/node.c @@ -127,12 +127,13 @@ static ssize_t node_read_meminfo(struct sys_device * dev, nid, K(node_page_state(nid, NR_WRITEBACK)), nid, K(node_page_state(nid, NR_FILE_PAGES)), nid, K(node_page_state(nid, NR_FILE_MAPPED)), - nid, K(node_page_state(nid, NR_ANON_PAGES) #ifdef CONFIG_TRANSPARENT_HUGEPAGE + nid, K(node_page_state(nid, NR_ANON_PAGES) + node_page_state(nid, NR_ANON_TRANSPARENT_HUGEPAGES) * - HPAGE_PMD_NR + HPAGE_PMD_NR), +#else + nid, K(node_page_state(nid, NR_ANON_PAGES)), #endif - ), nid, K(node_page_state(nid, NR_SHMEM)), nid, node_page_state(nid, NR_KERNEL_STACK) * THREAD_SIZE / 1024, @@ -143,13 +144,14 @@ static ssize_t node_read_meminfo(struct sys_device * dev, nid, K(node_page_state(nid, NR_SLAB_RECLAIMABLE) + node_page_state(nid, NR_SLAB_UNRECLAIMABLE)), nid, K(node_page_state(nid, NR_SLAB_RECLAIMABLE)), - nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE)) #ifdef CONFIG_TRANSPARENT_HUGEPAGE + nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE)) , nid, K(node_page_state(nid, NR_ANON_TRANSPARENT_HUGEPAGES) * - HPAGE_PMD_NR) + HPAGE_PMD_NR)); +#else + nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE))); #endif - ); n += hugetlb_report_node_meminfo(nid, buf + n); return n; } -- cgit v0.10.2 From 6ac2afb3f4601d74778a6ef76c50813a5b85b133 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Fri, 18 Nov 2011 11:05:10 +0100 Subject: misc: ad525x_dpot: Fix AD8400 spi transfer size. AD8400 type devices require 16-bit command transfers. Signed-off-by: Michael Hennerich Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/misc/ad525x_dpot.h b/drivers/misc/ad525x_dpot.h index a662f59..82b2cb7 100644 --- a/drivers/misc/ad525x_dpot.h +++ b/drivers/misc/ad525x_dpot.h @@ -100,7 +100,7 @@ enum dpot_devid { AD5293_ID = DPOT_CONF(F_RDACS_RW | F_SPI_16BIT, BRDAC0, 10, 27), AD7376_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT, BRDAC0, 7, 28), - AD8400_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT, + AD8400_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_16BIT, BRDAC0, 8, 29), AD8402_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_16BIT, BRDAC0 | BRDAC1, 8, 30), -- cgit v0.10.2 From e253dec31b3ffc2bf19aa8c29865ab7254e90c29 Mon Sep 17 00:00:00 2001 From: Jayachandran C Date: Fri, 18 Nov 2011 12:12:41 +0530 Subject: usb: Netlogic: Fix HC_LENGTH call in ehci-xls.c Fix compile error, HC_LENGTH now takes two parameters and ehci needs to be passed as the first parameter. Signed-off-by: Jayachandran C Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-xls.c b/drivers/usb/host/ehci-xls.c index fe74bd6..b4fb511 100644 --- a/drivers/usb/host/ehci-xls.c +++ b/drivers/usb/host/ehci-xls.c @@ -19,7 +19,7 @@ static int ehci_xls_setup(struct usb_hcd *hcd) ehci->caps = hcd->regs; ehci->regs = hcd->regs + - HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); + HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); dbg_hcs_params(ehci, "reset"); dbg_hcc_params(ehci, "reset"); -- cgit v0.10.2 From 46b5a277ed90317a4d17e936c16037e76011b219 Mon Sep 17 00:00:00 2001 From: "zheng.zhijian@zte.com.cn" Date: Thu, 17 Nov 2011 19:23:25 +0800 Subject: USB: option: release new PID for ZTE 3G modem This patch adds new PIDs for ZTE 3G modem, after we confirm it and tested. Thanks for Dan's work at kernel option devier. Signed-off-by: Alvin.Zheng Signed-off-by: wsalvin Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index b8da93b..d59e375 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -316,6 +316,9 @@ static void option_instat_callback(struct urb *urb); #define ZTE_PRODUCT_AC8710 0xfff1 #define ZTE_PRODUCT_AC2726 0xfff5 #define ZTE_PRODUCT_AC8710T 0xffff +#define ZTE_PRODUCT_MC2718 0xffe8 +#define ZTE_PRODUCT_AD3812 0xffeb +#define ZTE_PRODUCT_MC2716 0xffed #define BENQ_VENDOR_ID 0x04a5 #define BENQ_PRODUCT_H10 0x4068 @@ -504,6 +507,18 @@ static const struct option_blacklist_info zte_k3765_z_blacklist = { .reserved = BIT(4), }; +static const struct option_blacklist_info zte_ad3812_z_blacklist = { + .sendsetup = BIT(0) | BIT(1) | BIT(2), +}; + +static const struct option_blacklist_info zte_mc2718_z_blacklist = { + .sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4), +}; + +static const struct option_blacklist_info zte_mc2716_z_blacklist = { + .sendsetup = BIT(1) | BIT(2) | BIT(3), +}; + static const struct option_blacklist_info huawei_cdc12_blacklist = { .reserved = BIT(1) | BIT(2), }; @@ -1047,6 +1062,12 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist }, { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) }, { USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */ -- cgit v0.10.2 From c61875977458637226ab093a35d200f2d5789787 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 17 Nov 2011 16:41:45 -0500 Subject: OHCI: final fix for NVIDIA problems (I hope) Problems with NVIDIA's OHCI host controllers persist. After looking carefully through the spec, I finally realized that when a controller is reset it then automatically goes into a SUSPEND state in which it is completely quiescent (no DMA and no IRQs) and from which it will not awaken until the system puts it into the OPERATIONAL state. Therefore there's no need to worry about controllers being in the RESET state for extended periods, or remaining in the OPERATIONAL state during system shutdown. The proper action for device initialization is to put the controller into the RESET state (if it's not there already) and then to issue a software reset. Similarly, the proper action for device shutdown is simply to do a software reset. This patch (as1499) implements such an approach. It simplifies initialization and shutdown, and allows the NVIDIA shutdown-quirk code to be removed. Signed-off-by: Alan Stern Tested-by: Andre "Osku" Schmidt Tested-by: Arno Augustin Cc: stable [after tested in 3.2 for a while] Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 34efd47..b263919 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -389,17 +389,14 @@ ohci_shutdown (struct usb_hcd *hcd) struct ohci_hcd *ohci; ohci = hcd_to_ohci (hcd); - ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable); - ohci->hc_control = ohci_readl(ohci, &ohci->regs->control); + ohci_writel(ohci, (u32) ~0, &ohci->regs->intrdisable); - /* If the SHUTDOWN quirk is set, don't put the controller in RESET */ - ohci->hc_control &= (ohci->flags & OHCI_QUIRK_SHUTDOWN ? - OHCI_CTRL_RWC | OHCI_CTRL_HCFS : - OHCI_CTRL_RWC); - ohci_writel(ohci, ohci->hc_control, &ohci->regs->control); + /* Software reset, after which the controller goes into SUSPEND */ + ohci_writel(ohci, OHCI_HCR, &ohci->regs->cmdstatus); + ohci_readl(ohci, &ohci->regs->cmdstatus); /* flush the writes */ + udelay(10); - /* flush the writes */ - (void) ohci_readl (ohci, &ohci->regs->control); + ohci_writel(ohci, ohci->fminterval, &ohci->regs->fminterval); } static int check_ed(struct ohci_hcd *ohci, struct ed *ed) diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index ad8166c..bc01b06 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -175,28 +175,6 @@ static int ohci_quirk_amd700(struct usb_hcd *hcd) return 0; } -/* nVidia controllers continue to drive Reset signalling on the bus - * even after system shutdown, wasting power. This flag tells the - * shutdown routine to leave the controller OPERATIONAL instead of RESET. - */ -static int ohci_quirk_nvidia_shutdown(struct usb_hcd *hcd) -{ - struct pci_dev *pdev = to_pci_dev(hcd->self.controller); - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - - /* Evidently nVidia fixed their later hardware; this is a guess at - * the changeover point. - */ -#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_USB 0x026d - - if (pdev->device < PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_USB) { - ohci->flags |= OHCI_QUIRK_SHUTDOWN; - ohci_dbg(ohci, "enabled nVidia shutdown quirk\n"); - } - - return 0; -} - static void sb800_prefetch(struct ohci_hcd *ohci, int on) { struct pci_dev *pdev; @@ -260,10 +238,6 @@ static const struct pci_device_id ohci_pci_quirks[] = { PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399), .driver_data = (unsigned long)ohci_quirk_amd700, }, - { - PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID), - .driver_data = (unsigned long) ohci_quirk_nvidia_shutdown, - }, /* FIXME for some of the early AMD 760 southbridges, OHCI * won't work at all. blacklist them. diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h index 35e5fd6..0795b93 100644 --- a/drivers/usb/host/ohci.h +++ b/drivers/usb/host/ohci.h @@ -403,7 +403,6 @@ struct ohci_hcd { #define OHCI_QUIRK_HUB_POWER 0x100 /* distrust firmware power/oc setup */ #define OHCI_QUIRK_AMD_PLL 0x200 /* AMD PLL quirk*/ #define OHCI_QUIRK_AMD_PREFETCH 0x400 /* pre-fetch for ISO transfer */ -#define OHCI_QUIRK_SHUTDOWN 0x800 /* nVidia power bug */ // there are also chip quirks/bugs in init logic struct work_struct nec_work; /* Worker for NEC quirk */ diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index c7fd6ce..caf8742 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -37,6 +37,7 @@ #define OHCI_INTRENABLE 0x10 #define OHCI_INTRDISABLE 0x14 #define OHCI_FMINTERVAL 0x34 +#define OHCI_HCFS (3 << 6) /* hc functional state */ #define OHCI_HCR (1 << 0) /* host controller reset */ #define OHCI_OCR (1 << 3) /* ownership change request */ #define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */ @@ -466,6 +467,8 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) { void __iomem *base; u32 control; + u32 fminterval; + int cnt; if (!mmio_resource_enabled(pdev, 0)) return; @@ -498,41 +501,32 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) } #endif - /* reset controller, preserving RWC (and possibly IR) */ - writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL); - readl(base + OHCI_CONTROL); + /* disable interrupts */ + writel((u32) ~0, base + OHCI_INTRDISABLE); - /* Some NVIDIA controllers stop working if kept in RESET for too long */ - if (pdev->vendor == PCI_VENDOR_ID_NVIDIA) { - u32 fminterval; - int cnt; + /* Reset the USB bus, if the controller isn't already in RESET */ + if (control & OHCI_HCFS) { + /* Go into RESET, preserving RWC (and possibly IR) */ + writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL); + readl(base + OHCI_CONTROL); - /* drive reset for at least 50 ms (7.1.7.5) */ + /* drive bus reset for at least 50 ms (7.1.7.5) */ msleep(50); + } - /* software reset of the controller, preserving HcFmInterval */ - fminterval = readl(base + OHCI_FMINTERVAL); - writel(OHCI_HCR, base + OHCI_CMDSTATUS); + /* software reset of the controller, preserving HcFmInterval */ + fminterval = readl(base + OHCI_FMINTERVAL); + writel(OHCI_HCR, base + OHCI_CMDSTATUS); - /* reset requires max 10 us delay */ - for (cnt = 30; cnt > 0; --cnt) { /* ... allow extra time */ - if ((readl(base + OHCI_CMDSTATUS) & OHCI_HCR) == 0) - break; - udelay(1); - } - writel(fminterval, base + OHCI_FMINTERVAL); - - /* Now we're in the SUSPEND state with all devices reset - * and wakeups and interrupts disabled - */ + /* reset requires max 10 us delay */ + for (cnt = 30; cnt > 0; --cnt) { /* ... allow extra time */ + if ((readl(base + OHCI_CMDSTATUS) & OHCI_HCR) == 0) + break; + udelay(1); } + writel(fminterval, base + OHCI_FMINTERVAL); - /* - * disable interrupts - */ - writel(~(u32)0, base + OHCI_INTRDISABLE); - writel(~(u32)0, base + OHCI_INTRSTATUS); - + /* Now the controller is safely in SUSPEND and nothing can wake it up */ iounmap(base); } -- cgit v0.10.2 From 4aa3648c719265bac9c2742c9ebb043e6dbdd790 Mon Sep 17 00:00:00 2001 From: Ferenc Wagner Date: Thu, 17 Nov 2011 16:44:58 +0100 Subject: USB: option: add PID of Huawei E173s 3G modem Signed-off-by: Ferenc Wagner Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index d59e375..d865878 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -156,6 +156,7 @@ static void option_instat_callback(struct urb *urb); #define HUAWEI_PRODUCT_K4511 0x14CC #define HUAWEI_PRODUCT_ETS1220 0x1803 #define HUAWEI_PRODUCT_E353 0x1506 +#define HUAWEI_PRODUCT_E173S 0x1C05 #define QUANTA_VENDOR_ID 0x0408 #define QUANTA_PRODUCT_Q101 0xEA02 @@ -641,6 +642,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173S, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff), -- cgit v0.10.2 From b1ffb4c851f185e9051ba837c16d9b84ef688d26 Mon Sep 17 00:00:00 2001 From: Andrew Worsley Date: Fri, 18 Nov 2011 23:13:33 +1100 Subject: USB: Fix Corruption issue in USB ftdi driver ftdi_sio.c Fix for ftdi_set_termios() glitching output ftdi_set_termios() is constantly setting the baud rate, data bits and parity unnecessarily on every call, . When called while characters are being transmitted can cause the FTDI chip to corrupt the serial port bit stream output by stalling the output half a bit during the output of a character. Simple fix by skipping this setting if the baud rate/data bits/parity are unchanged. Signed-off-by: Andrew Worsley Cc: stable ---- I had a brief run with strace on the getty and it was doing ioctl()s on each call but it didn't look relavant to the problem. I think the issue is that XON/XOFF flow control was being implmented via hardware - for the ixoff to allow the user to use XON/XOFF to control output. Unfortunately it would send 3 Control URBs updating all of the settings after each piece of input I am trying to work around the issue of gmail messing with the tab/spacing by submitting via SMTP via gmail which I believe should fix the issue. The patch is against v3.2-rc2 and compiles - but no additional testing in this kernel has been done. Thanks Andrew Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 8fe034d..bd4298b 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -2104,13 +2104,19 @@ static void ftdi_set_termios(struct tty_struct *tty, cflag = termios->c_cflag; - /* FIXME -For this cut I don't care if the line is really changing or - not - so just do the change regardless - should be able to - compare old_termios and tty->termios */ + if (old_termios->c_cflag == termios->c_cflag + && old_termios->c_ispeed == termios->c_ispeed + && old_termios->c_ospeed == termios->c_ospeed) + goto no_c_cflag_changes; + /* NOTE These routines can get interrupted by ftdi_sio_read_bulk_callback - need to examine what this means - don't see any problems yet */ + if ((old_termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)) == + (termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB))) + goto no_data_parity_stop_changes; + /* Set number of data bits, parity, stop bits */ urb_value = 0; @@ -2151,6 +2157,7 @@ static void ftdi_set_termios(struct tty_struct *tty, } /* Now do the baudrate */ +no_data_parity_stop_changes: if ((cflag & CBAUD) == B0) { /* Disable flow control */ if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), @@ -2178,6 +2185,7 @@ static void ftdi_set_termios(struct tty_struct *tty, /* Set flow control */ /* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */ +no_c_cflag_changes: if (cflag & CRTSCTS) { dbg("%s Setting to CRTSCTS flow control", __func__); if (usb_control_msg(dev, -- cgit v0.10.2 From 2e9ff8d917af622785b5b9f46d849b7eee43b29c Mon Sep 17 00:00:00 2001 From: Mark Einon Date: Fri, 4 Nov 2011 17:58:02 +0000 Subject: linux-next: et131x: Fix build error when CONFIG_PM_SLEEP not enabled Randy Dunlap reports that the ex131x driver doesn't build when CONFIG_PM_SLEEP is not enabled. This bug was introduced when moving code around to remove some forward declarations earlier, the #endif part of #ifdef CONFIG_PM_SLEEP was not moved at the same time. Now fixed by moving it to its proper place. Reported-by: Randy Dunlap Signed-off-by: Mark Einon Acked-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c index f5f44a0..0c1c6ca 100644 --- a/drivers/staging/et131x/et131x.c +++ b/drivers/staging/et131x/et131x.c @@ -4469,6 +4469,12 @@ static int et131x_resume(struct device *dev) return 0; } +static SIMPLE_DEV_PM_OPS(et131x_pm_ops, et131x_suspend, et131x_resume); +#define ET131X_PM_OPS (&et131x_pm_ops) +#else +#define ET131X_PM_OPS NULL +#endif + /* ISR functions */ /** @@ -5470,12 +5476,6 @@ err_out: return result; } -static SIMPLE_DEV_PM_OPS(et131x_pm_ops, et131x_suspend, et131x_resume); -#define ET131X_PM_OPS (&et131x_pm_ops) -#else -#define ET131X_PM_OPS NULL -#endif - static DEFINE_PCI_DEVICE_TABLE(et131x_pci_table) = { { PCI_VDEVICE(ATT, ET131X_PCI_DEVICE_ID_GIG), 0UL}, { PCI_VDEVICE(ATT, ET131X_PCI_DEVICE_ID_FAST), 0UL}, -- cgit v0.10.2 From 07de7a5ecbd241507bf1d521e56692842a3e70d4 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 1 Nov 2011 14:43:09 -0700 Subject: staging: slicoss depends on NET The slicoss driver uses network interfaces so it should depend on NET. Fixes the following build errors: ERROR: "eth_change_mtu" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "eth_validate_addr" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "register_netdev" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "alloc_etherdev_mqs" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "__netif_schedule" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "netif_rx" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "eth_type_trans" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "skb_put" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "skb_pull" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "__alloc_skb" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "free_netdev" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "unregister_netdev" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "consume_skb" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "dev_kfree_skb_irq" [drivers/staging/slicoss/slicoss.ko] undefined! Signed-off-by: Randy Dunlap Cc: Lior Dotan Cc: Christopher Harrer Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/slicoss/Kconfig b/drivers/staging/slicoss/Kconfig index 5cde96b..5c2a15b 100644 --- a/drivers/staging/slicoss/Kconfig +++ b/drivers/staging/slicoss/Kconfig @@ -1,6 +1,6 @@ config SLICOSS tristate "Alacritech Gigabit IS-NIC support" - depends on PCI && X86 + depends on PCI && X86 && NET default n help This driver supports Alacritech's IS-NIC gigabit ethernet cards. -- cgit v0.10.2 From 0337510f7cef9d569811b058a33306943c685ef6 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 3 Nov 2011 14:24:00 -0700 Subject: staging: et131x depends on NET ET131X uses netdev interfaces so it should depend on NET. Fixes these build errors: ERROR: "ethtool_op_get_link" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "eth_validate_addr" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "register_netdev" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_connect" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_find_first" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_register" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_alloc" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "alloc_etherdev_mqs" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "netif_device_detach" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_stop" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "netif_device_attach" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_start" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "free_netdev" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_free" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_unregister" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "unregister_netdev" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "__netif_schedule" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_print_status" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "dev_kfree_skb_any" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "dev_alloc_skb" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "netif_rx" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "eth_type_trans" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "skb_put" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_ethtool_gset" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_ethtool_sset" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_mii_ioctl" [drivers/staging/et131x/et131x.ko] undefined! Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/et131x/Kconfig b/drivers/staging/et131x/Kconfig index 9e1864c..98a1653 100644 --- a/drivers/staging/et131x/Kconfig +++ b/drivers/staging/et131x/Kconfig @@ -1,6 +1,6 @@ config ET131X tristate "Agere ET-1310 Gigabit Ethernet support" - depends on PCI + depends on PCI && NET default n ---help--- This driver supports Agere ET-1310 ethernet adapters. -- cgit v0.10.2 From c9fb041ff13c3b7b599fce6fb63cb903d69945d6 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 15 Nov 2011 17:04:12 -0800 Subject: staging: fix more ET131X build errors ET131X is a network device, so it should depend on NETDEVICES. (This part won't be needed when the driver moves to drivers/net/.) It also uses PHYLIB interfaces, so it should select PHYLIB. Fixes these build errors: ERROR: "phy_connect" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_find_first" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_register" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_alloc" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_stop" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_start" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_free" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_unregister" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_print_status" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_ethtool_gset" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_ethtool_sset" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_mii_ioctl" [drivers/staging/et131x/et131x.ko] undefined! Signed-off-by: Randy Dunlap Acked-by: : Mark Einon Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/et131x/Kconfig b/drivers/staging/et131x/Kconfig index 98a1653..8190f2a 100644 --- a/drivers/staging/et131x/Kconfig +++ b/drivers/staging/et131x/Kconfig @@ -1,6 +1,7 @@ config ET131X tristate "Agere ET-1310 Gigabit Ethernet support" - depends on PCI && NET + depends on PCI && NET && NETDEVICES + select PHYLIB default n ---help--- This driver supports Agere ET-1310 ethernet adapters. -- cgit v0.10.2 From dbd1b5473ce8ae40fe7385eacc9294355eec0676 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sat, 19 Nov 2011 11:41:30 +0100 Subject: ALSA: hda - Add pin fix for Alienware M17x R3 Reported-by: Albert Pool Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 470f6f2..f365865 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -1641,6 +1641,8 @@ static const struct snd_pci_quirk stac92hd73xx_codec_id_cfg_tbl[] = { "Alienware M17x", STAC_ALIENWARE_M17X), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x043a, "Alienware M17x", STAC_ALIENWARE_M17X), + SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0490, + "Alienware M17x", STAC_ALIENWARE_M17X), {} /* terminator */ }; -- cgit v0.10.2 From 27c9cd7e601632b3794e1c3344d37b86917ffb43 Mon Sep 17 00:00:00 2001 From: Jeff Ohlstein Date: Fri, 18 Nov 2011 15:47:10 -0800 Subject: hrtimer: Fix extra wakeups from __remove_hrtimer() __remove_hrtimer() attempts to reprogram the clockevent device when the timer being removed is the next to expire. However, __remove_hrtimer() reprograms the clockevent *before* removing the timer from the timerqueue and thus when hrtimer_force_reprogram() finds the next timer to expire it finds the timer we're trying to remove. This is especially noticeable when the system switches to NOHz mode and the system tick is removed. The timer tick is removed from the system but the clockevent is programmed to wakeup in another HZ anyway. Silence the extra wakeup by removing the timer from the timerqueue before calling hrtimer_force_reprogram() so that we actually program the clockevent for the next timer to expire. This was broken by 998adc3 "hrtimers: Convert hrtimers to use timerlist infrastructure". Signed-off-by: Jeff Ohlstein Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1321660030-8520-1-git-send-email-johlstei@codeaurora.org Signed-off-by: Thomas Gleixner diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index a9205e3..2043c08 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -885,10 +885,13 @@ static void __remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base, unsigned long newstate, int reprogram) { + struct timerqueue_node *next_timer; if (!(timer->state & HRTIMER_STATE_ENQUEUED)) goto out; - if (&timer->node == timerqueue_getnext(&base->active)) { + next_timer = timerqueue_getnext(&base->active); + timerqueue_del(&base->active, &timer->node); + if (&timer->node == next_timer) { #ifdef CONFIG_HIGH_RES_TIMERS /* Reprogram the clock event device. if enabled */ if (reprogram && hrtimer_hres_active()) { @@ -901,7 +904,6 @@ static void __remove_hrtimer(struct hrtimer *timer, } #endif } - timerqueue_del(&base->active, &timer->node); if (!timerqueue_getnext(&base->active)) base->cpu_base->active_bases &= ~(1 << base->index); out: -- cgit v0.10.2 From 016e8d44bc06dd3322f26712bdd3f3a6973592d0 Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Fri, 19 Aug 2011 14:50:26 -0400 Subject: fs/minix: Verify bitmap block counts before mounting Newer versions of MINIX can create filesystems that allocate an extra bitmap block. Mounting of this succeeds, but doing a statfs call will result in an oops in count_free because of a negative number being used for the bh index. Avoid this by verifying the number of allocated blocks at mount time, erroring out if there are not enough and make statfs ignore the extras if there are too many. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=18792 Signed-off-by: Josh Boyer Signed-off-by: Al Viro diff --git a/fs/minix/bitmap.c b/fs/minix/bitmap.c index 3f32bcb..7c82c29 100644 --- a/fs/minix/bitmap.c +++ b/fs/minix/bitmap.c @@ -20,10 +20,11 @@ static const int nibblemap[] = { 4,3,3,2,3,2,2,1,3,2,2,1,2,1,1,0 }; static DEFINE_SPINLOCK(bitmap_lock); -static unsigned long count_free(struct buffer_head *map[], unsigned numblocks, __u32 numbits) +static unsigned long count_free(struct buffer_head *map[], unsigned blocksize, __u32 numbits) { unsigned i, j, sum = 0; struct buffer_head *bh; + unsigned numblocks = minix_blocks_needed(numbits, blocksize); for (i=0; is_zmap, sbi->s_zmap_blocks, - sbi->s_nzones - sbi->s_firstdatazone + 1) + struct minix_sb_info *sbi = minix_sb(sb); + u32 bits = sbi->s_nzones - (sbi->s_firstdatazone + 1); + + return (count_free(sbi->s_zmap, sb->s_blocksize, bits) << sbi->s_log_zone_size); } @@ -273,7 +276,10 @@ struct inode *minix_new_inode(const struct inode *dir, int mode, int *error) return inode; } -unsigned long minix_count_free_inodes(struct minix_sb_info *sbi) +unsigned long minix_count_free_inodes(struct super_block *sb) { - return count_free(sbi->s_imap, sbi->s_imap_blocks, sbi->s_ninodes + 1); + struct minix_sb_info *sbi = minix_sb(sb); + u32 bits = sbi->s_ninodes + 1; + + return count_free(sbi->s_imap, sb->s_blocksize, bits); } diff --git a/fs/minix/inode.c b/fs/minix/inode.c index 64cdcd6..1d9e339 100644 --- a/fs/minix/inode.c +++ b/fs/minix/inode.c @@ -279,6 +279,27 @@ static int minix_fill_super(struct super_block *s, void *data, int silent) else if (sbi->s_mount_state & MINIX_ERROR_FS) printk("MINIX-fs: mounting file system with errors, " "running fsck is recommended\n"); + + /* Apparently minix can create filesystems that allocate more blocks for + * the bitmaps than needed. We simply ignore that, but verify it didn't + * create one with not enough blocks and bail out if so. + */ + block = minix_blocks_needed(sbi->s_ninodes, s->s_blocksize); + if (sbi->s_imap_blocks < block) { + printk("MINIX-fs: file system does not have enough " + "imap blocks allocated. Refusing to mount\n"); + goto out_iput; + } + + block = minix_blocks_needed( + (sbi->s_nzones - (sbi->s_firstdatazone + 1)), + s->s_blocksize); + if (sbi->s_zmap_blocks < block) { + printk("MINIX-fs: file system does not have enough " + "zmap blocks allocated. Refusing to mount.\n"); + goto out_iput; + } + return 0; out_iput: @@ -339,10 +360,10 @@ static int minix_statfs(struct dentry *dentry, struct kstatfs *buf) buf->f_type = sb->s_magic; buf->f_bsize = sb->s_blocksize; buf->f_blocks = (sbi->s_nzones - sbi->s_firstdatazone) << sbi->s_log_zone_size; - buf->f_bfree = minix_count_free_blocks(sbi); + buf->f_bfree = minix_count_free_blocks(sb); buf->f_bavail = buf->f_bfree; buf->f_files = sbi->s_ninodes; - buf->f_ffree = minix_count_free_inodes(sbi); + buf->f_ffree = minix_count_free_inodes(sb); buf->f_namelen = sbi->s_namelen; buf->f_fsid.val[0] = (u32)id; buf->f_fsid.val[1] = (u32)(id >> 32); diff --git a/fs/minix/minix.h b/fs/minix/minix.h index 341e212..6415fe0 100644 --- a/fs/minix/minix.h +++ b/fs/minix/minix.h @@ -48,10 +48,10 @@ extern struct minix_inode * minix_V1_raw_inode(struct super_block *, ino_t, stru extern struct minix2_inode * minix_V2_raw_inode(struct super_block *, ino_t, struct buffer_head **); extern struct inode * minix_new_inode(const struct inode *, int, int *); extern void minix_free_inode(struct inode * inode); -extern unsigned long minix_count_free_inodes(struct minix_sb_info *sbi); +extern unsigned long minix_count_free_inodes(struct super_block *sb); extern int minix_new_block(struct inode * inode); extern void minix_free_block(struct inode *inode, unsigned long block); -extern unsigned long minix_count_free_blocks(struct minix_sb_info *sbi); +extern unsigned long minix_count_free_blocks(struct super_block *sb); extern int minix_getattr(struct vfsmount *, struct dentry *, struct kstat *); extern int minix_prepare_chunk(struct page *page, loff_t pos, unsigned len); @@ -88,6 +88,11 @@ static inline struct minix_inode_info *minix_i(struct inode *inode) return list_entry(inode, struct minix_inode_info, vfs_inode); } +static inline unsigned minix_blocks_needed(unsigned bits, unsigned blocksize) +{ + return DIV_ROUND_UP(bits, blocksize * 8); +} + #if defined(CONFIG_MINIX_FS_NATIVE_ENDIAN) && \ defined(CONFIG_MINIX_FS_BIG_ENDIAN_16BIT_INDEXED) -- cgit v0.10.2 From f1fd306a91f875e65af0e04855b23adda6831ac9 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 26 Aug 2011 22:38:50 -0400 Subject: minixfs: kill manual hweight(), simplify Signed-off-by: Al Viro diff --git a/fs/minix/bitmap.c b/fs/minix/bitmap.c index 7c82c29..ef175cb 100644 --- a/fs/minix/bitmap.c +++ b/fs/minix/bitmap.c @@ -16,39 +16,26 @@ #include #include -static const int nibblemap[] = { 4,3,3,2,3,2,2,1,3,2,2,1,2,1,1,0 }; - static DEFINE_SPINLOCK(bitmap_lock); -static unsigned long count_free(struct buffer_head *map[], unsigned blocksize, __u32 numbits) +/* + * bitmap consists of blocks filled with 16bit words + * bit set == busy, bit clear == free + * endianness is a mess, but for counting zero bits it really doesn't matter... + */ +static __u32 count_free(struct buffer_head *map[], unsigned blocksize, __u32 numbits) { - unsigned i, j, sum = 0; - struct buffer_head *bh; - unsigned numblocks = minix_blocks_needed(numbits, blocksize); - - for (i=0; ib_size; j++) - sum += nibblemap[bh->b_data[j] & 0xf] - + nibblemap[(bh->b_data[j]>>4) & 0xf]; - } + __u32 sum = 0; + unsigned blocks = DIV_ROUND_UP(numbits, blocksize * 8); - if (numblocks==0 || !(bh=map[numblocks-1])) - return(0); - i = ((numbits - (numblocks-1) * bh->b_size * 8) / 16) * 2; - for (j=0; jb_data[j] & 0xf] - + nibblemap[(bh->b_data[j]>>4) & 0xf]; + while (blocks--) { + unsigned words = blocksize / 2; + __u16 *p = (__u16 *)(*map++)->b_data; + while (words--) + sum += 16 - hweight16(*p++); } - i = numbits%16; - if (i!=0) { - i = *(__u16 *)(&bh->b_data[j]) | ~((1<>4) & 0xf]; - sum += nibblemap[(i>>8) & 0xf] + nibblemap[(i>>12) & 0xf]; - } - return(sum); + return sum; } void minix_free_block(struct inode *inode, unsigned long block) diff --git a/fs/minix/minix.h b/fs/minix/minix.h index 6415fe0..26bbd55 100644 --- a/fs/minix/minix.h +++ b/fs/minix/minix.h @@ -130,7 +130,7 @@ static inline int minix_find_first_zero_bit(const void *vaddr, unsigned size) if (!size) return 0; - size = (size >> 4) + ((size & 15) > 0); + size >>= 4; while (*p++ == 0xffff) { if (--size == 0) return (p - addr) << 4; -- cgit v0.10.2 From e70f224c1938af208b64b02c5cec27889fefcaec Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marek=20Ol=C5=A1=C3=A1k?= Date: Tue, 25 Oct 2011 01:38:45 +0200 Subject: drm/radeon/kms: add a CS ioctl flag not to rewrite tiling flags in the CS MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This adds a new optional chunk to the CS ioctl that specifies optional flags to the CS parser. Why this is useful is explained below. Note that some regs no longer need the NOP relocation packet if this feature is enabled. Tested on r300g and r600g with this flag disabled and enabled. Assume there are two contexts sharing the same mipmapped tiled texture. One context wants to render into the first mipmap and the other one wants to render into the last mipmap. As you probably know, the hardware has a MACRO_SWITCH feature, which turns off macro tiling for small mipmaps, but that only applies to samplers. (at least on r300-r500, though later hardware likely behaves the same) So we want to just re-set the tiling flags before rendering (writing packets), right? ... No. The contexts run in parallel, so they may set the tiling flags simultaneously and then fire their command streams also simultaneously. The last one setting the flags wins, the other one loses. Another problem is when one context wants to render into the first and the last mipmap in one CS. Impossible. It must flush before changing tiling flags and do the rendering into the smaller mipmaps in another CS. Yet another problem is that writing copy_blit in userspace would be a mess involving re-setting tiling flags to please the kernel, and causing races with other contexts at the same time. The only way out of this is to send tiling flags with each CS, ideally with each relocation. But we already do that through the registers. So let's just use what we have in the registers. Signed-off-by: Marek Olšák Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c index 7fdfa8e..38e1bda 100644 --- a/drivers/gpu/drm/radeon/evergreen_cs.c +++ b/drivers/gpu/drm/radeon/evergreen_cs.c @@ -480,21 +480,23 @@ static int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) } break; case DB_Z_INFO: - r = evergreen_cs_packet_next_reloc(p, &reloc); - if (r) { - dev_warn(p->dev, "bad SET_CONTEXT_REG " - "0x%04X\n", reg); - return -EINVAL; - } track->db_z_info = radeon_get_ib_value(p, idx); - ib[idx] &= ~Z_ARRAY_MODE(0xf); - track->db_z_info &= ~Z_ARRAY_MODE(0xf); - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { - ib[idx] |= Z_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - track->db_z_info |= Z_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - } else { - ib[idx] |= Z_ARRAY_MODE(ARRAY_1D_TILED_THIN1); - track->db_z_info |= Z_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + if (!p->keep_tiling_flags) { + r = evergreen_cs_packet_next_reloc(p, &reloc); + if (r) { + dev_warn(p->dev, "bad SET_CONTEXT_REG " + "0x%04X\n", reg); + return -EINVAL; + } + ib[idx] &= ~Z_ARRAY_MODE(0xf); + track->db_z_info &= ~Z_ARRAY_MODE(0xf); + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { + ib[idx] |= Z_ARRAY_MODE(ARRAY_2D_TILED_THIN1); + track->db_z_info |= Z_ARRAY_MODE(ARRAY_2D_TILED_THIN1); + } else { + ib[idx] |= Z_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + track->db_z_info |= Z_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + } } break; case DB_STENCIL_INFO: @@ -607,40 +609,44 @@ static int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) case CB_COLOR5_INFO: case CB_COLOR6_INFO: case CB_COLOR7_INFO: - r = evergreen_cs_packet_next_reloc(p, &reloc); - if (r) { - dev_warn(p->dev, "bad SET_CONTEXT_REG " - "0x%04X\n", reg); - return -EINVAL; - } tmp = (reg - CB_COLOR0_INFO) / 0x3c; track->cb_color_info[tmp] = radeon_get_ib_value(p, idx); - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { - ib[idx] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - } else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) { - ib[idx] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); - track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + if (!p->keep_tiling_flags) { + r = evergreen_cs_packet_next_reloc(p, &reloc); + if (r) { + dev_warn(p->dev, "bad SET_CONTEXT_REG " + "0x%04X\n", reg); + return -EINVAL; + } + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { + ib[idx] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); + track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); + } else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) { + ib[idx] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + } } break; case CB_COLOR8_INFO: case CB_COLOR9_INFO: case CB_COLOR10_INFO: case CB_COLOR11_INFO: - r = evergreen_cs_packet_next_reloc(p, &reloc); - if (r) { - dev_warn(p->dev, "bad SET_CONTEXT_REG " - "0x%04X\n", reg); - return -EINVAL; - } tmp = ((reg - CB_COLOR8_INFO) / 0x1c) + 8; track->cb_color_info[tmp] = radeon_get_ib_value(p, idx); - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { - ib[idx] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - } else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) { - ib[idx] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); - track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + if (!p->keep_tiling_flags) { + r = evergreen_cs_packet_next_reloc(p, &reloc); + if (r) { + dev_warn(p->dev, "bad SET_CONTEXT_REG " + "0x%04X\n", reg); + return -EINVAL; + } + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { + ib[idx] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); + track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); + } else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) { + ib[idx] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + } } break; case CB_COLOR0_PITCH: @@ -1311,10 +1317,12 @@ static int evergreen_packet3_check(struct radeon_cs_parser *p, return -EINVAL; } ib[idx+1+(i*8)+2] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff); - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) - ib[idx+1+(i*8)+1] |= TEX_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) - ib[idx+1+(i*8)+1] |= TEX_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + if (!p->keep_tiling_flags) { + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) + ib[idx+1+(i*8)+1] |= TEX_ARRAY_MODE(ARRAY_2D_TILED_THIN1); + else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) + ib[idx+1+(i*8)+1] |= TEX_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + } texture = reloc->robj; /* tex mip base */ r = evergreen_cs_packet_next_reloc(p, &reloc); diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index 400b26d..c93bc64 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -701,16 +701,21 @@ static int r300_packet0_check(struct radeon_cs_parser *p, return r; } - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) - tile_flags |= R300_TXO_MACRO_TILE; - if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) - tile_flags |= R300_TXO_MICRO_TILE; - else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO_SQUARE) - tile_flags |= R300_TXO_MICRO_TILE_SQUARE; - - tmp = idx_value + ((u32)reloc->lobj.gpu_offset); - tmp |= tile_flags; - ib[idx] = tmp; + if (p->keep_tiling_flags) { + ib[idx] = (idx_value & 31) | /* keep the 1st 5 bits */ + ((idx_value & ~31) + (u32)reloc->lobj.gpu_offset); + } else { + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) + tile_flags |= R300_TXO_MACRO_TILE; + if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) + tile_flags |= R300_TXO_MICRO_TILE; + else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO_SQUARE) + tile_flags |= R300_TXO_MICRO_TILE_SQUARE; + + tmp = idx_value + ((u32)reloc->lobj.gpu_offset); + tmp |= tile_flags; + ib[idx] = tmp; + } track->textures[i].robj = reloc->robj; track->tex_dirty = true; break; @@ -760,24 +765,26 @@ static int r300_packet0_check(struct radeon_cs_parser *p, /* RB3D_COLORPITCH1 */ /* RB3D_COLORPITCH2 */ /* RB3D_COLORPITCH3 */ - r = r100_cs_packet_next_reloc(p, &reloc); - if (r) { - DRM_ERROR("No reloc for ib[%d]=0x%04X\n", - idx, reg); - r100_cs_dump_packet(p, pkt); - return r; - } + if (!p->keep_tiling_flags) { + r = r100_cs_packet_next_reloc(p, &reloc); + if (r) { + DRM_ERROR("No reloc for ib[%d]=0x%04X\n", + idx, reg); + r100_cs_dump_packet(p, pkt); + return r; + } - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) - tile_flags |= R300_COLOR_TILE_ENABLE; - if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) - tile_flags |= R300_COLOR_MICROTILE_ENABLE; - else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO_SQUARE) - tile_flags |= R300_COLOR_MICROTILE_SQUARE_ENABLE; + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) + tile_flags |= R300_COLOR_TILE_ENABLE; + if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) + tile_flags |= R300_COLOR_MICROTILE_ENABLE; + else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO_SQUARE) + tile_flags |= R300_COLOR_MICROTILE_SQUARE_ENABLE; - tmp = idx_value & ~(0x7 << 16); - tmp |= tile_flags; - ib[idx] = tmp; + tmp = idx_value & ~(0x7 << 16); + tmp |= tile_flags; + ib[idx] = tmp; + } i = (reg - 0x4E38) >> 2; track->cb[i].pitch = idx_value & 0x3FFE; switch (((idx_value >> 21) & 0xF)) { @@ -843,25 +850,26 @@ static int r300_packet0_check(struct radeon_cs_parser *p, break; case 0x4F24: /* ZB_DEPTHPITCH */ - r = r100_cs_packet_next_reloc(p, &reloc); - if (r) { - DRM_ERROR("No reloc for ib[%d]=0x%04X\n", - idx, reg); - r100_cs_dump_packet(p, pkt); - return r; - } - - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) - tile_flags |= R300_DEPTHMACROTILE_ENABLE; - if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) - tile_flags |= R300_DEPTHMICROTILE_TILED; - else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO_SQUARE) - tile_flags |= R300_DEPTHMICROTILE_TILED_SQUARE; + if (!p->keep_tiling_flags) { + r = r100_cs_packet_next_reloc(p, &reloc); + if (r) { + DRM_ERROR("No reloc for ib[%d]=0x%04X\n", + idx, reg); + r100_cs_dump_packet(p, pkt); + return r; + } - tmp = idx_value & ~(0x7 << 16); - tmp |= tile_flags; - ib[idx] = tmp; + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) + tile_flags |= R300_DEPTHMACROTILE_ENABLE; + if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) + tile_flags |= R300_DEPTHMICROTILE_TILED; + else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO_SQUARE) + tile_flags |= R300_DEPTHMICROTILE_TILED_SQUARE; + tmp = idx_value & ~(0x7 << 16); + tmp |= tile_flags; + ib[idx] = tmp; + } track->zb.pitch = idx_value & 0x3FFC; track->zb_dirty = true; break; diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 0a2e023..cb1acff 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -941,7 +941,8 @@ static int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) track->db_depth_control = radeon_get_ib_value(p, idx); break; case R_028010_DB_DEPTH_INFO: - if (r600_cs_packet_next_is_pkt3_nop(p)) { + if (!p->keep_tiling_flags && + r600_cs_packet_next_is_pkt3_nop(p)) { r = r600_cs_packet_next_reloc(p, &reloc); if (r) { dev_warn(p->dev, "bad SET_CONTEXT_REG " @@ -992,7 +993,8 @@ static int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) case R_0280B4_CB_COLOR5_INFO: case R_0280B8_CB_COLOR6_INFO: case R_0280BC_CB_COLOR7_INFO: - if (r600_cs_packet_next_is_pkt3_nop(p)) { + if (!p->keep_tiling_flags && + r600_cs_packet_next_is_pkt3_nop(p)) { r = r600_cs_packet_next_reloc(p, &reloc); if (r) { dev_err(p->dev, "bad SET_CONTEXT_REG 0x%04X\n", reg); @@ -1291,10 +1293,12 @@ static int r600_check_texture_resource(struct radeon_cs_parser *p, u32 idx, mip_offset <<= 8; word0 = radeon_get_ib_value(p, idx + 0); - if (tiling_flags & RADEON_TILING_MACRO) - word0 |= S_038000_TILE_MODE(V_038000_ARRAY_2D_TILED_THIN1); - else if (tiling_flags & RADEON_TILING_MICRO) - word0 |= S_038000_TILE_MODE(V_038000_ARRAY_1D_TILED_THIN1); + if (!p->keep_tiling_flags) { + if (tiling_flags & RADEON_TILING_MACRO) + word0 |= S_038000_TILE_MODE(V_038000_ARRAY_2D_TILED_THIN1); + else if (tiling_flags & RADEON_TILING_MICRO) + word0 |= S_038000_TILE_MODE(V_038000_ARRAY_1D_TILED_THIN1); + } word1 = radeon_get_ib_value(p, idx + 1); w0 = G_038000_TEX_WIDTH(word0) + 1; h0 = G_038004_TEX_HEIGHT(word1) + 1; @@ -1621,10 +1625,12 @@ static int r600_packet3_check(struct radeon_cs_parser *p, return -EINVAL; } base_offset = (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff); - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) - ib[idx+1+(i*7)+0] |= S_038000_TILE_MODE(V_038000_ARRAY_2D_TILED_THIN1); - else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) - ib[idx+1+(i*7)+0] |= S_038000_TILE_MODE(V_038000_ARRAY_1D_TILED_THIN1); + if (!p->keep_tiling_flags) { + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) + ib[idx+1+(i*7)+0] |= S_038000_TILE_MODE(V_038000_ARRAY_2D_TILED_THIN1); + else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) + ib[idx+1+(i*7)+0] |= S_038000_TILE_MODE(V_038000_ARRAY_1D_TILED_THIN1); + } texture = reloc->robj; /* tex mip base */ r = r600_cs_packet_next_reloc(p, &reloc); diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index fc5a1d6..8227e76 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -611,7 +611,8 @@ struct radeon_cs_parser { struct radeon_ib *ib; void *track; unsigned family; - int parser_error; + int parser_error; + bool keep_tiling_flags; }; extern int radeon_cs_update_pages(struct radeon_cs_parser *p, int pg_idx); diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c index ccaa243..29afd71 100644 --- a/drivers/gpu/drm/radeon/radeon_cs.c +++ b/drivers/gpu/drm/radeon/radeon_cs.c @@ -93,7 +93,7 @@ int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data) { struct drm_radeon_cs *cs = data; uint64_t *chunk_array_ptr; - unsigned size, i; + unsigned size, i, flags = 0; if (!cs->num_chunks) { return 0; @@ -140,6 +140,10 @@ int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data) if (p->chunks[i].length_dw == 0) return -EINVAL; } + if (p->chunks[i].chunk_id == RADEON_CHUNK_ID_FLAGS && + !p->chunks[i].length_dw) { + return -EINVAL; + } p->chunks[i].length_dw = user_chunk.length_dw; p->chunks[i].user_ptr = (void __user *)(unsigned long)user_chunk.chunk_data; @@ -155,6 +159,9 @@ int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data) p->chunks[i].user_ptr, size)) { return -EFAULT; } + if (p->chunks[i].chunk_id == RADEON_CHUNK_ID_FLAGS) { + flags = p->chunks[i].kdata[0]; + } } else { p->chunks[i].kpage[0] = kmalloc(PAGE_SIZE, GFP_KERNEL); p->chunks[i].kpage[1] = kmalloc(PAGE_SIZE, GFP_KERNEL); @@ -174,6 +181,8 @@ int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data) p->chunks[p->chunk_ib_idx].length_dw); return -EINVAL; } + + p->keep_tiling_flags = (flags & RADEON_CS_KEEP_TILING_FLAGS) != 0; return 0; } diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index a0b35e9..71499fc 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -53,9 +53,10 @@ * 2.9.0 - r600 tiling (s3tc,rgtc) working, SET_PREDICATION packet 3 on r600 + eg, backend query * 2.10.0 - fusion 2D tiling * 2.11.0 - backend map, initial compute support for the CS checker + * 2.12.0 - RADEON_CS_KEEP_TILING_FLAGS */ #define KMS_DRIVER_MAJOR 2 -#define KMS_DRIVER_MINOR 11 +#define KMS_DRIVER_MINOR 12 #define KMS_DRIVER_PATCHLEVEL 0 int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags); int radeon_driver_unload_kms(struct drm_device *dev); diff --git a/include/drm/radeon_drm.h b/include/drm/radeon_drm.h index b65be60..be94be6 100644 --- a/include/drm/radeon_drm.h +++ b/include/drm/radeon_drm.h @@ -874,6 +874,10 @@ struct drm_radeon_gem_pwrite { #define RADEON_CHUNK_ID_RELOCS 0x01 #define RADEON_CHUNK_ID_IB 0x02 +#define RADEON_CHUNK_ID_FLAGS 0x03 + +/* The first dword of RADEON_CHUNK_ID_FLAGS is a uint32 of these flags: */ +#define RADEON_CS_KEEP_TILING_FLAGS 0x01 struct drm_radeon_cs_chunk { uint32_t chunk_id; -- cgit v0.10.2 From 387125fc722a8ed432066b85a552917343bdafca Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Fri, 18 Nov 2011 15:07:51 -0500 Subject: Btrfs: fix barrier flushes When btrfs is writing the super blocks, it send barrier flushes to make sure writeback caching drives get all the metadata on disk in the right order. But, we have two bugs in the way these are sent down. When doing full commits (not via the tree log), we are sending the barrier down before the last super when it should be going down before the first. In multi-device setups, we should be waiting for the barriers to complete on all devices before writing any of the supers. Both of these bugs can cause corruptions on power failures. We fix it with some new code to send down empty barriers to all devices before writing the first super. Alexandre Oliva found the multi-device bug. Arne Jansen did the async barrier loop. Signed-off-by: Chris Mason Reported-by: Alexandre Oliva diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index b6a5c0d..48d3013 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -2573,22 +2573,10 @@ static int write_dev_supers(struct btrfs_device *device, int errors = 0; u32 crc; u64 bytenr; - int last_barrier = 0; if (max_mirrors == 0) max_mirrors = BTRFS_SUPER_MIRROR_MAX; - /* make sure only the last submit_bh does a barrier */ - if (do_barriers) { - for (i = 0; i < max_mirrors; i++) { - bytenr = btrfs_sb_offset(i); - if (bytenr + BTRFS_SUPER_INFO_SIZE >= - device->total_bytes) - break; - last_barrier = i; - } - } - for (i = 0; i < max_mirrors; i++) { bytenr = btrfs_sb_offset(i); if (bytenr + BTRFS_SUPER_INFO_SIZE >= device->total_bytes) @@ -2634,17 +2622,136 @@ static int write_dev_supers(struct btrfs_device *device, bh->b_end_io = btrfs_end_buffer_write_sync; } - if (i == last_barrier && do_barriers) - ret = submit_bh(WRITE_FLUSH_FUA, bh); - else - ret = submit_bh(WRITE_SYNC, bh); - + /* + * we fua the first super. The others we allow + * to go down lazy. + */ + ret = submit_bh(WRITE_FUA, bh); if (ret) errors++; } return errors < i ? 0 : -1; } +/* + * endio for the write_dev_flush, this will wake anyone waiting + * for the barrier when it is done + */ +static void btrfs_end_empty_barrier(struct bio *bio, int err) +{ + if (err) { + if (err == -EOPNOTSUPP) + set_bit(BIO_EOPNOTSUPP, &bio->bi_flags); + clear_bit(BIO_UPTODATE, &bio->bi_flags); + } + if (bio->bi_private) + complete(bio->bi_private); + bio_put(bio); +} + +/* + * trigger flushes for one the devices. If you pass wait == 0, the flushes are + * sent down. With wait == 1, it waits for the previous flush. + * + * any device where the flush fails with eopnotsupp are flagged as not-barrier + * capable + */ +static int write_dev_flush(struct btrfs_device *device, int wait) +{ + struct bio *bio; + int ret = 0; + + if (device->nobarriers) + return 0; + + if (wait) { + bio = device->flush_bio; + if (!bio) + return 0; + + wait_for_completion(&device->flush_wait); + + if (bio_flagged(bio, BIO_EOPNOTSUPP)) { + printk("btrfs: disabling barriers on dev %s\n", + device->name); + device->nobarriers = 1; + } + if (!bio_flagged(bio, BIO_UPTODATE)) { + ret = -EIO; + } + + /* drop the reference from the wait == 0 run */ + bio_put(bio); + device->flush_bio = NULL; + + return ret; + } + + /* + * one reference for us, and we leave it for the + * caller + */ + device->flush_bio = NULL;; + bio = bio_alloc(GFP_NOFS, 0); + if (!bio) + return -ENOMEM; + + bio->bi_end_io = btrfs_end_empty_barrier; + bio->bi_bdev = device->bdev; + init_completion(&device->flush_wait); + bio->bi_private = &device->flush_wait; + device->flush_bio = bio; + + bio_get(bio); + submit_bio(WRITE_FLUSH, bio); + + return 0; +} + +/* + * send an empty flush down to each device in parallel, + * then wait for them + */ +static int barrier_all_devices(struct btrfs_fs_info *info) +{ + struct list_head *head; + struct btrfs_device *dev; + int errors = 0; + int ret; + + /* send down all the barriers */ + head = &info->fs_devices->devices; + list_for_each_entry_rcu(dev, head, dev_list) { + if (!dev->bdev) { + errors++; + continue; + } + if (!dev->in_fs_metadata || !dev->writeable) + continue; + + ret = write_dev_flush(dev, 0); + if (ret) + errors++; + } + + /* wait for all the barriers */ + list_for_each_entry_rcu(dev, head, dev_list) { + if (!dev->bdev) { + errors++; + continue; + } + if (!dev->in_fs_metadata || !dev->writeable) + continue; + + ret = write_dev_flush(dev, 1); + if (ret) + errors++; + } + if (errors) + return -EIO; + return 0; +} + int write_all_supers(struct btrfs_root *root, int max_mirrors) { struct list_head *head; @@ -2666,6 +2773,10 @@ int write_all_supers(struct btrfs_root *root, int max_mirrors) mutex_lock(&root->fs_info->fs_devices->device_list_mutex); head = &root->fs_info->fs_devices->devices; + + if (do_barriers) + barrier_all_devices(root->fs_info); + list_for_each_entry_rcu(dev, head, dev_list) { if (!dev->bdev) { total_errors++; diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h index ab5b1c4..78f2d4d 100644 --- a/fs/btrfs/volumes.h +++ b/fs/btrfs/volumes.h @@ -100,6 +100,12 @@ struct btrfs_device { struct reada_zone *reada_curr_zone; struct radix_tree_root reada_zones; struct radix_tree_root reada_extents; + + /* for sending down flush barriers */ + struct bio *flush_bio; + struct completion flush_wait; + int nobarriers; + }; struct btrfs_fs_devices { -- cgit v0.10.2 From 745c4d8e160afaf6c75e887c27ea4b75c8142b26 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Sun, 20 Nov 2011 07:31:57 -0500 Subject: btrfs: Fix up 32/64-bit compatibility for new ioctls This patch casts to unsigned long before casting to a pointer and fixes the following warnings: fs/btrfs/extent_io.c:2289:20: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] fs/btrfs/ioctl.c:2933:37: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] fs/btrfs/ioctl.c:2937:21: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] fs/btrfs/ioctl.c:3020:21: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] fs/btrfs/scrub.c:275:4: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] fs/btrfs/backref.c:686:27: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Signed-off-by: Jeff Mahoney Signed-off-by: Chris Mason diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c index 8855aad..22c64ff 100644 --- a/fs/btrfs/backref.c +++ b/fs/btrfs/backref.c @@ -683,7 +683,7 @@ static int inode_to_path(u64 inum, struct btrfs_inode_ref *iref, return PTR_ERR(fspath); if (fspath > fspath_min) { - ipath->fspath->val[i] = (u64)fspath; + ipath->fspath->val[i] = (u64)(unsigned long)fspath; ++ipath->fspath->elem_cnt; ipath->fspath->bytes_left = fspath - fspath_min; } else { diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 1f87c4d..47fdba7 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -2286,7 +2286,7 @@ static void end_bio_extent_readpage(struct bio *bio, int err) } if (!uptodate) { u64 failed_mirror; - failed_mirror = (u64)bio->bi_bdev; + failed_mirror = (unsigned long)bio->bi_bdev; if (tree->ops && tree->ops->readpage_io_failed_hook) ret = tree->ops->readpage_io_failed_hook( bio, page, start, end, diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 4a34c47..bda53fc 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -2930,11 +2930,13 @@ static long btrfs_ioctl_ino_to_path(struct btrfs_root *root, void __user *arg) goto out; for (i = 0; i < ipath->fspath->elem_cnt; ++i) { - rel_ptr = ipath->fspath->val[i] - (u64)ipath->fspath->val; + rel_ptr = ipath->fspath->val[i] - + (u64)(unsigned long)ipath->fspath->val; ipath->fspath->val[i] = rel_ptr; } - ret = copy_to_user((void *)ipa->fspath, (void *)ipath->fspath, size); + ret = copy_to_user((void *)(unsigned long)ipa->fspath, + (void *)(unsigned long)ipath->fspath, size); if (ret) { ret = -EFAULT; goto out; @@ -3017,7 +3019,8 @@ static long btrfs_ioctl_logical_to_ino(struct btrfs_root *root, if (ret < 0) goto out; - ret = copy_to_user((void *)loi->inodes, (void *)inodes, size); + ret = copy_to_user((void *)(unsigned long)loi->inodes, + (void *)(unsigned long)inodes, size); if (ret) ret = -EFAULT; diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c index f4190f2..fab420d 100644 --- a/fs/btrfs/scrub.c +++ b/fs/btrfs/scrub.c @@ -272,7 +272,7 @@ static int scrub_print_warning_inode(u64 inum, u64 offset, u64 root, void *ctx) swarn->logical, swarn->dev->name, (unsigned long long)swarn->sector, root, inum, offset, min(isize - offset, (u64)PAGE_SIZE), nlink, - (char *)ipath->fspath->val[i]); + (char *)(unsigned long)ipath->fspath->val[i]); free_ipath(ipath); return 0; -- cgit v0.10.2 From 32240a913d9f3a5aad42175d7696590ea1bfdb08 Mon Sep 17 00:00:00 2001 From: Jan Schmidt Date: Sun, 20 Nov 2011 07:33:38 -0500 Subject: btrfs: mirror_num should be int, not u64 My previous patch introduced some u64 for failed_mirror variables, this one makes it consistent again. Signed-off-by: Jan Schmidt Signed-off-by: Chris Mason diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 48d3013..94abc25 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -620,7 +620,7 @@ out: static int btree_io_failed_hook(struct bio *failed_bio, struct page *page, u64 start, u64 end, - u64 mirror_num, struct extent_state *state) + int mirror_num, struct extent_state *state) { struct extent_io_tree *tree; unsigned long len; diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 47fdba7..a877b8b 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -2285,8 +2285,8 @@ static void end_bio_extent_readpage(struct bio *bio, int err) clean_io_failure(start, page); } if (!uptodate) { - u64 failed_mirror; - failed_mirror = (unsigned long)bio->bi_bdev; + int failed_mirror; + failed_mirror = (int)(unsigned long)bio->bi_bdev; if (tree->ops && tree->ops->readpage_io_failed_hook) ret = tree->ops->readpage_io_failed_hook( bio, page, start, end, diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h index feb9be0..7604c30 100644 --- a/fs/btrfs/extent_io.h +++ b/fs/btrfs/extent_io.h @@ -70,7 +70,7 @@ struct extent_io_ops { unsigned long bio_flags); int (*readpage_io_hook)(struct page *page, u64 start, u64 end); int (*readpage_io_failed_hook)(struct bio *bio, struct page *page, - u64 start, u64 end, u64 failed_mirror, + u64 start, u64 end, int failed_mirror, struct extent_state *state); int (*writepage_io_failed_hook)(struct bio *bio, struct page *page, u64 start, u64 end, -- cgit v0.10.2 From 0f0fbf1d0e188d129756e9508090af4bdbfde00b Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Sun, 20 Nov 2011 07:33:38 -0500 Subject: Btrfs: fix to search one more bitmap for cluster setup Suppose there are two bitmaps [0, 256], [256, 512] and one extent [100, 120] in the free space cache, and we want to setup a cluster with offset=100, bytes=50. In this case, there will be only one bitmap [256, 512] in the temporary bitmaps list, and then setup_cluster_bitmap() won't search bitmap [0, 256]. The cause is, the list is constructed in setup_cluster_no_bitmap(), and only bitmaps with bitmap_entry->offset >= offset will be added into the list, and the very bitmap that convers offset has bitmap_entry->offset <= offset. Signed-off-by: Li Zefan Signed-off-by: Chris Mason diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 181760f..8f792f4 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -2453,11 +2453,23 @@ setup_cluster_bitmap(struct btrfs_block_group_cache *block_group, struct btrfs_free_space *entry; struct rb_node *node; int ret = -ENOSPC; + u64 bitmap_offset = offset_to_bitmap(ctl, offset); if (ctl->total_bitmaps == 0) return -ENOSPC; /* + * The bitmap that covers offset won't be in the list unless offset + * is just its start offset. + */ + entry = list_first_entry(bitmaps, struct btrfs_free_space, list); + if (entry->offset != bitmap_offset) { + entry = tree_search_offset(ctl, bitmap_offset, 1, 0); + if (entry && list_empty(&entry->list)) + list_add(&entry->list, bitmaps); + } + + /* * First check our cached list of bitmaps and see if there is an entry * here that will work. */ -- cgit v0.10.2 From 52621cb6ed0e0e14358bb317bda7cd5fbd5c2a27 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Sun, 20 Nov 2011 07:33:38 -0500 Subject: Btrfs: avoid unnecessary bitmap search for cluster setup setup_cluster_no_bitmap() searches all the extents and bitmaps starting from offset. Therefore if it returns -ENOSPC, all the bitmaps starting from offset are in the bitmaps list, so it's sufficient to search from this list in setup_cluser_bitmap(). Signed-off-by: Li Zefan Signed-off-by: Chris Mason diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 8f792f4..8c32434 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -2451,7 +2451,6 @@ setup_cluster_bitmap(struct btrfs_block_group_cache *block_group, { struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; struct btrfs_free_space *entry; - struct rb_node *node; int ret = -ENOSPC; u64 bitmap_offset = offset_to_bitmap(ctl, offset); @@ -2469,10 +2468,6 @@ setup_cluster_bitmap(struct btrfs_block_group_cache *block_group, list_add(&entry->list, bitmaps); } - /* - * First check our cached list of bitmaps and see if there is an entry - * here that will work. - */ list_for_each_entry(entry, bitmaps, list) { if (entry->bytes < min_bytes) continue; @@ -2483,38 +2478,10 @@ setup_cluster_bitmap(struct btrfs_block_group_cache *block_group, } /* - * If we do have entries on our list and we are here then we didn't find - * anything, so go ahead and get the next entry after the last entry in - * this list and start the search from there. + * The bitmaps list has all the bitmaps that record free space + * starting after offset, so no more search is required. */ - if (!list_empty(bitmaps)) { - entry = list_entry(bitmaps->prev, struct btrfs_free_space, - list); - node = rb_next(&entry->offset_index); - if (!node) - return -ENOSPC; - entry = rb_entry(node, struct btrfs_free_space, offset_index); - goto search; - } - - entry = tree_search_offset(ctl, offset_to_bitmap(ctl, offset), 0, 1); - if (!entry) - return -ENOSPC; - -search: - node = &entry->offset_index; - do { - entry = rb_entry(node, struct btrfs_free_space, offset_index); - node = rb_next(&entry->offset_index); - if (!entry->bitmap) - continue; - if (entry->bytes < min_bytes) - continue; - ret = btrfs_bitmap_cluster(block_group, entry, cluster, offset, - bytes, min_bytes); - } while (ret && node); - - return ret; + return -ENOSPC; } /* @@ -2532,8 +2499,8 @@ int btrfs_find_space_cluster(struct btrfs_trans_handle *trans, u64 offset, u64 bytes, u64 empty_size) { struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; - struct list_head bitmaps; struct btrfs_free_space *entry, *tmp; + LIST_HEAD(bitmaps); u64 min_bytes; int ret; @@ -2572,7 +2539,6 @@ int btrfs_find_space_cluster(struct btrfs_trans_handle *trans, goto out; } - INIT_LIST_HEAD(&bitmaps); ret = setup_cluster_no_bitmap(block_group, cluster, &bitmaps, offset, bytes, min_bytes); if (ret) -- cgit v0.10.2 From fadc0d8be4dfca80f6c568bc5874931893c6709b Mon Sep 17 00:00:00 2001 From: David Sterba Date: Sun, 20 Nov 2011 07:33:38 -0500 Subject: btrfs: fix stat blocks accounting Round inode bytes and delalloc bytes up to real blocksize before converting to sector size. Otherwise eg. files smaller than 512 are reported with zero blocks due to incorrect rounding. Signed-off-by: David Sterba Signed-off-by: Chris Mason diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index e16215f..8ad26b1 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -6794,11 +6794,13 @@ static int btrfs_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat) { struct inode *inode = dentry->d_inode; + u32 blocksize = inode->i_sb->s_blocksize; + generic_fillattr(inode, stat); stat->dev = BTRFS_I(inode)->root->anon_dev; stat->blksize = PAGE_CACHE_SIZE; - stat->blocks = (inode_get_bytes(inode) + - BTRFS_I(inode)->delalloc_bytes) >> 9; + stat->blocks = (ALIGN(inode_get_bytes(inode), blocksize) + + ALIGN(BTRFS_I(inode)->delalloc_bytes, blocksize)) >> 9; return 0; } -- cgit v0.10.2 From 5bb1468238e20b15921909e9f9601e945f03bac7 Mon Sep 17 00:00:00 2001 From: Arnd Hannemann Date: Sun, 20 Nov 2011 07:33:38 -0500 Subject: Btrfs: prefix resize related printks with btrfs: For the user it is confusing to find something like: [10197.627710] new size for /dev/mapper/vg0-usr_share is 3221225472 in kernel log, because it doesn't point directly to btrfs. This patch prefixes those messages with "btrfs:" like other btrfs related printks. Signed-off-by: Arnd Hannemann Signed-off-by: Chris Mason diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index bda53fc..a90e749 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1216,12 +1216,12 @@ static noinline int btrfs_ioctl_resize(struct btrfs_root *root, *devstr = '\0'; devstr = vol_args->name; devid = simple_strtoull(devstr, &end, 10); - printk(KERN_INFO "resizing devid %llu\n", + printk(KERN_INFO "btrfs: resizing devid %llu\n", (unsigned long long)devid); } device = btrfs_find_device(root, devid, NULL, NULL); if (!device) { - printk(KERN_INFO "resizer unable to find device %llu\n", + printk(KERN_INFO "btrfs: resizer unable to find device %llu\n", (unsigned long long)devid); ret = -EINVAL; goto out_unlock; @@ -1267,7 +1267,7 @@ static noinline int btrfs_ioctl_resize(struct btrfs_root *root, do_div(new_size, root->sectorsize); new_size *= root->sectorsize; - printk(KERN_INFO "new size for %s is %llu\n", + printk(KERN_INFO "btrfs: new size for %s is %llu\n", device->name, (unsigned long long)new_size); if (new_size > old_size) { -- cgit v0.10.2 From 291c7d2f577428f896daa5002e784959328a80aa Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 14 Nov 2011 13:52:14 -0500 Subject: Btrfs: wait on caching if we're loading the free space cache We've been hitting panics when running xfstest 13 in a loop for long periods of time. And actually this problem has always existed so we've been hitting these things randomly for a while. Basically what happens is we get a thread coming into the allocator and reading the space cache off of disk and adding the entries to the free space cache as we go. Then we get another thread that comes in and tries to allocate from that block group. Since block_group->cached != BTRFS_CACHE_NO it goes ahead and tries to do the allocation. We do this because if we're doing the old slow way of caching we don't want to hold people up and wait for everything to finish. The problem with this is we could end up discarding the space cache at some arbitrary point in the future, which means we could very well end up allocating space that is either bad, or when the real caching happens it could end up thinking the space isn't in use when it really is and cause all sorts of other problems. The solution is to add a new flag to indicate we are loading the free space cache from disk, and always try to cache the block group if cache->cached != BTRFS_CACHE_FINISHED. That way if we are loading the space cache anybody else who tries to allocate from the block group will have to wait until it's finished to make sure it completes successfully. Thanks, Signed-off-by: Josef Bacik diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index b1cb3c0..04a5dfc 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -848,7 +848,8 @@ struct btrfs_free_cluster { enum btrfs_caching_type { BTRFS_CACHE_NO = 0, BTRFS_CACHE_STARTED = 1, - BTRFS_CACHE_FINISHED = 2, + BTRFS_CACHE_FAST = 2, + BTRFS_CACHE_FINISHED = 3, }; enum btrfs_disk_cache_state { diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 0f47b3e..5d86877 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -467,13 +467,59 @@ static int cache_block_group(struct btrfs_block_group_cache *cache, struct btrfs_root *root, int load_cache_only) { + DEFINE_WAIT(wait); struct btrfs_fs_info *fs_info = cache->fs_info; struct btrfs_caching_control *caching_ctl; int ret = 0; - smp_mb(); - if (cache->cached != BTRFS_CACHE_NO) + caching_ctl = kzalloc(sizeof(*caching_ctl), GFP_NOFS); + BUG_ON(!caching_ctl); + + INIT_LIST_HEAD(&caching_ctl->list); + mutex_init(&caching_ctl->mutex); + init_waitqueue_head(&caching_ctl->wait); + caching_ctl->block_group = cache; + caching_ctl->progress = cache->key.objectid; + atomic_set(&caching_ctl->count, 1); + caching_ctl->work.func = caching_thread; + + spin_lock(&cache->lock); + /* + * This should be a rare occasion, but this could happen I think in the + * case where one thread starts to load the space cache info, and then + * some other thread starts a transaction commit which tries to do an + * allocation while the other thread is still loading the space cache + * info. The previous loop should have kept us from choosing this block + * group, but if we've moved to the state where we will wait on caching + * block groups we need to first check if we're doing a fast load here, + * so we can wait for it to finish, otherwise we could end up allocating + * from a block group who's cache gets evicted for one reason or + * another. + */ + while (cache->cached == BTRFS_CACHE_FAST) { + struct btrfs_caching_control *ctl; + + ctl = cache->caching_ctl; + atomic_inc(&ctl->count); + prepare_to_wait(&ctl->wait, &wait, TASK_UNINTERRUPTIBLE); + spin_unlock(&cache->lock); + + schedule(); + + finish_wait(&ctl->wait, &wait); + put_caching_control(ctl); + spin_lock(&cache->lock); + } + + if (cache->cached != BTRFS_CACHE_NO) { + spin_unlock(&cache->lock); + kfree(caching_ctl); return 0; + } + WARN_ON(cache->caching_ctl); + cache->caching_ctl = caching_ctl; + cache->cached = BTRFS_CACHE_FAST; + spin_unlock(&cache->lock); /* * We can't do the read from on-disk cache during a commit since we need @@ -484,56 +530,51 @@ static int cache_block_group(struct btrfs_block_group_cache *cache, if (trans && (!trans->transaction->in_commit) && (root && root != root->fs_info->tree_root) && btrfs_test_opt(root, SPACE_CACHE)) { - spin_lock(&cache->lock); - if (cache->cached != BTRFS_CACHE_NO) { - spin_unlock(&cache->lock); - return 0; - } - cache->cached = BTRFS_CACHE_STARTED; - spin_unlock(&cache->lock); - ret = load_free_space_cache(fs_info, cache); spin_lock(&cache->lock); if (ret == 1) { + cache->caching_ctl = NULL; cache->cached = BTRFS_CACHE_FINISHED; cache->last_byte_to_unpin = (u64)-1; } else { - cache->cached = BTRFS_CACHE_NO; + if (load_cache_only) { + cache->caching_ctl = NULL; + cache->cached = BTRFS_CACHE_NO; + } else { + cache->cached = BTRFS_CACHE_STARTED; + } } spin_unlock(&cache->lock); + wake_up(&caching_ctl->wait); if (ret == 1) { + put_caching_control(caching_ctl); free_excluded_extents(fs_info->extent_root, cache); return 0; } + } else { + /* + * We are not going to do the fast caching, set cached to the + * appropriate value and wakeup any waiters. + */ + spin_lock(&cache->lock); + if (load_cache_only) { + cache->caching_ctl = NULL; + cache->cached = BTRFS_CACHE_NO; + } else { + cache->cached = BTRFS_CACHE_STARTED; + } + spin_unlock(&cache->lock); + wake_up(&caching_ctl->wait); } - if (load_cache_only) - return 0; - - caching_ctl = kzalloc(sizeof(*caching_ctl), GFP_NOFS); - BUG_ON(!caching_ctl); - - INIT_LIST_HEAD(&caching_ctl->list); - mutex_init(&caching_ctl->mutex); - init_waitqueue_head(&caching_ctl->wait); - caching_ctl->block_group = cache; - caching_ctl->progress = cache->key.objectid; - /* one for caching kthread, one for caching block group list */ - atomic_set(&caching_ctl->count, 2); - caching_ctl->work.func = caching_thread; - - spin_lock(&cache->lock); - if (cache->cached != BTRFS_CACHE_NO) { - spin_unlock(&cache->lock); - kfree(caching_ctl); + if (load_cache_only) { + put_caching_control(caching_ctl); return 0; } - cache->caching_ctl = caching_ctl; - cache->cached = BTRFS_CACHE_STARTED; - spin_unlock(&cache->lock); down_write(&fs_info->extent_commit_sem); + atomic_inc(&caching_ctl->count); list_add_tail(&caching_ctl->list, &fs_info->caching_block_groups); up_write(&fs_info->extent_commit_sem); @@ -5177,13 +5218,15 @@ search: } have_block_group: - if (unlikely(block_group->cached == BTRFS_CACHE_NO)) { + cached = block_group_cache_done(block_group); + if (unlikely(!cached)) { u64 free_percent; + found_uncached_bg = true; ret = cache_block_group(block_group, trans, orig_root, 1); if (block_group->cached == BTRFS_CACHE_FINISHED) - goto have_block_group; + goto alloc; free_percent = btrfs_block_group_used(&block_group->item); free_percent *= 100; @@ -5205,7 +5248,6 @@ have_block_group: orig_root, 0); BUG_ON(ret); } - found_uncached_bg = true; /* * If loop is set for cached only, try the next block @@ -5215,10 +5257,7 @@ have_block_group: goto loop; } - cached = block_group_cache_done(block_group); - if (unlikely(!cached)) - found_uncached_bg = true; - +alloc: if (unlikely(block_group->ro)) goto loop; -- cgit v0.10.2 From f7d61dcd6873c49bcc42be2caa2af1c2511aa915 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 15 Nov 2011 09:31:24 -0500 Subject: Btrfs: clear pages dirty for io and set them extent mapped When doing the io_ctl helpers to clean up the free space cache stuff I stopped using our normal prepare_pages stuff, which means I of course forgot to do things like set the pages extent mapped, which will cause us all sorts of wonderful propblems. Thanks, Signed-off-by: Josef Bacik diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 8c32434..aedacdb 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -351,6 +351,11 @@ static int io_ctl_prepare_pages(struct io_ctl *io_ctl, struct inode *inode, } } + for (i = 0; i < io_ctl->num_pages; i++) { + clear_page_dirty_for_io(io_ctl->pages[i]); + set_page_extent_mapped(io_ctl->pages[i]); + } + return 0; } -- cgit v0.10.2 From 4d479cf010d56ec9c54f3099992d039918f1296b Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Thu, 17 Nov 2011 11:34:31 -0500 Subject: Btrfs: sectorsize align offsets in fiemap We've been hitting BUG()'s in btrfs_cont_expand and btrfs_fallocate and anywhere else that calls btrfs_get_extent while running xfstests 13 in a loop. This is because fiemap is calling btrfs_get_extent with non-sectorsize aligned offsets, which will end up adding mappings that are not sectorsize aligned, which will cause problems in some cases for subsequent calls to btrfs_get_extent for similar areas that are sectorsize aligned. With this patch I ran xfstests 13 in a loop for a couple of hours and didn't hit the problem that I could previously hit in at most 20 minutes. Thanks, Signed-off-by: Josef Bacik diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index a877b8b..9472d3d 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -3366,6 +3366,9 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, return -ENOMEM; path->leave_spinning = 1; + start = ALIGN(start, BTRFS_I(inode)->root->sectorsize); + len = ALIGN(len, BTRFS_I(inode)->root->sectorsize); + /* * lookup the last file extent. We're not using i_size here * because there might be preallocation past i_size @@ -3413,7 +3416,7 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, lock_extent_bits(&BTRFS_I(inode)->io_tree, start, start + len, 0, &cached_state, GFP_NOFS); - em = get_extent_skip_holes(inode, off, last_for_get_extent, + em = get_extent_skip_holes(inode, start, last_for_get_extent, get_extent); if (!em) goto out; -- cgit v0.10.2 From 0aed4a95ce3b39acfceb38ab7f93c7906b4a27f8 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Sun, 20 Nov 2011 15:10:27 +0100 Subject: ASoC: adau1373: fix DB_RANGE size Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent reading more data than actually is in the array. Signed-off-by: Clemens Ladisch diff --git a/sound/soc/codecs/adau1373.c b/sound/soc/codecs/adau1373.c index 1ccf8dd..45c6302 100644 --- a/sound/soc/codecs/adau1373.c +++ b/sound/soc/codecs/adau1373.c @@ -245,7 +245,7 @@ static const char *adau1373_bass_hpf_cutoff_text[] = { }; static const unsigned int adau1373_bass_tlv[] = { - TLV_DB_RANGE_HEAD(4), + TLV_DB_RANGE_HEAD(3), 0, 2, TLV_DB_SCALE_ITEM(-600, 600, 1), 3, 4, TLV_DB_SCALE_ITEM(950, 250, 0), 5, 7, TLV_DB_SCALE_ITEM(1400, 150, 0), -- cgit v0.10.2 From a19ea0b8ec1f6892bf18f461d5023c9299e1417b Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Sun, 20 Nov 2011 15:11:54 +0100 Subject: ASoC: rt5631: fix DB_RANGE size Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent the last entry from being omitted. Signed-off-by: Clemens Ladisch diff --git a/sound/soc/codecs/rt5631.c b/sound/soc/codecs/rt5631.c index 27a078c..4646e80 100644 --- a/sound/soc/codecs/rt5631.c +++ b/sound/soc/codecs/rt5631.c @@ -177,7 +177,7 @@ static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -95625, 375, 0); static const DECLARE_TLV_DB_SCALE(in_vol_tlv, -3450, 150, 0); /* {0, +20, +24, +30, +35, +40, +44, +50, +52}dB */ static unsigned int mic_bst_tlv[] = { - TLV_DB_RANGE_HEAD(6), + TLV_DB_RANGE_HEAD(7), 0, 0, TLV_DB_SCALE_ITEM(0, 0, 0), 1, 1, TLV_DB_SCALE_ITEM(2000, 0, 0), 2, 2, TLV_DB_SCALE_ITEM(2400, 0, 0), -- cgit v0.10.2 From 740fb9d512d91b1d6192ea13c109efa05b101424 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Sun, 20 Nov 2011 15:12:26 +0100 Subject: ASoC: sgtl5000: fix DB_RANGE size Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent reading more data than actually is in the array. Signed-off-by: Clemens Ladisch diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index d15695d..bbcf921 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -365,7 +365,7 @@ static const DECLARE_TLV_DB_SCALE(capture_6db_attenuate, -600, 600, 0); /* tlv for mic gain, 0db 20db 30db 40db */ static const unsigned int mic_gain_tlv[] = { - TLV_DB_RANGE_HEAD(4), + TLV_DB_RANGE_HEAD(2), 0, 0, TLV_DB_SCALE_ITEM(0, 0, 0), 1, 3, TLV_DB_SCALE_ITEM(2000, 1000, 0), }; -- cgit v0.10.2 From 43e9dc7bce9f21355cd2aa493a99281eae03b156 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Sun, 20 Nov 2011 15:13:27 +0100 Subject: ASoC: wm8962: fix DB_RANGE size Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent reading more data than actually is in the arrays. Signed-off-by: Clemens Ladisch diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 91d3c6d..53edd9a 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -1973,7 +1973,7 @@ static int wm8962_reset(struct snd_soc_codec *codec) static const DECLARE_TLV_DB_SCALE(inpga_tlv, -2325, 75, 0); static const DECLARE_TLV_DB_SCALE(mixin_tlv, -1500, 300, 0); static const unsigned int mixinpga_tlv[] = { - TLV_DB_RANGE_HEAD(7), + TLV_DB_RANGE_HEAD(5), 0, 1, TLV_DB_SCALE_ITEM(0, 600, 0), 2, 2, TLV_DB_SCALE_ITEM(1300, 1300, 0), 3, 4, TLV_DB_SCALE_ITEM(1800, 200, 0), @@ -1988,7 +1988,7 @@ static const DECLARE_TLV_DB_SCALE(bypass_tlv, -1500, 300, 0); static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1); static const DECLARE_TLV_DB_SCALE(hp_tlv, -700, 100, 0); static const unsigned int classd_tlv[] = { - TLV_DB_RANGE_HEAD(7), + TLV_DB_RANGE_HEAD(2), 0, 6, TLV_DB_SCALE_ITEM(0, 150, 0), 7, 7, TLV_DB_SCALE_ITEM(1200, 0, 0), }; -- cgit v0.10.2 From dac678f5c281fac55aadfa5f390c12a8d14bbc67 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Sun, 20 Nov 2011 15:14:11 +0100 Subject: ASoC: wm8993: fix DB_RANGE size Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent reading more data than actually is in the array. Signed-off-by: Clemens Ladisch diff --git a/sound/soc/codecs/wm8993.c b/sound/soc/codecs/wm8993.c index eec8e14..d1a142f4 100644 --- a/sound/soc/codecs/wm8993.c +++ b/sound/soc/codecs/wm8993.c @@ -512,7 +512,7 @@ static const DECLARE_TLV_DB_SCALE(drc_comp_threash, -4500, 75, 0); static const DECLARE_TLV_DB_SCALE(drc_comp_amp, -2250, 75, 0); static const DECLARE_TLV_DB_SCALE(drc_min_tlv, -1800, 600, 0); static const unsigned int drc_max_tlv[] = { - TLV_DB_RANGE_HEAD(4), + TLV_DB_RANGE_HEAD(2), 0, 2, TLV_DB_SCALE_ITEM(1200, 600, 0), 3, 3, TLV_DB_SCALE_ITEM(3600, 0, 0), }; -- cgit v0.10.2 From a1320fee27352b608a82020a47a59bb15e6e5db8 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Sun, 20 Nov 2011 15:14:55 +0100 Subject: ASoC: wm9090: fix DB_RANGE size Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent reading more data than actually is in the arrays. Signed-off-by: Clemens Ladisch diff --git a/sound/soc/codecs/wm9090.c b/sound/soc/codecs/wm9090.c index 2b5252c..f94c060 100644 --- a/sound/soc/codecs/wm9090.c +++ b/sound/soc/codecs/wm9090.c @@ -177,19 +177,19 @@ static void wait_for_dc_servo(struct snd_soc_codec *codec) } static const unsigned int in_tlv[] = { - TLV_DB_RANGE_HEAD(6), + TLV_DB_RANGE_HEAD(3), 0, 0, TLV_DB_SCALE_ITEM(-600, 0, 0), 1, 3, TLV_DB_SCALE_ITEM(-350, 350, 0), 4, 6, TLV_DB_SCALE_ITEM(600, 600, 0), }; static const unsigned int mix_tlv[] = { - TLV_DB_RANGE_HEAD(4), + TLV_DB_RANGE_HEAD(2), 0, 2, TLV_DB_SCALE_ITEM(-1200, 300, 0), 3, 3, TLV_DB_SCALE_ITEM(0, 0, 0), }; static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0); static const unsigned int spkboost_tlv[] = { - TLV_DB_RANGE_HEAD(7), + TLV_DB_RANGE_HEAD(2), 0, 6, TLV_DB_SCALE_ITEM(0, 150, 0), 7, 7, TLV_DB_SCALE_ITEM(1200, 0, 0), }; -- cgit v0.10.2 From 028aa634e180107ac93b790c0fed7376c0402d1a Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Sun, 20 Nov 2011 15:15:31 +0100 Subject: ASoC: wm_hubs: fix DB_RANGE size Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent reading more data than actually is in the array. Signed-off-by: Clemens Ladisch diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c index 84f33d4..48e61e9 100644 --- a/sound/soc/codecs/wm_hubs.c +++ b/sound/soc/codecs/wm_hubs.c @@ -40,7 +40,7 @@ static const DECLARE_TLV_DB_SCALE(outmix_tlv, -2100, 300, 0); static const DECLARE_TLV_DB_SCALE(spkmixout_tlv, -1800, 600, 1); static const DECLARE_TLV_DB_SCALE(outpga_tlv, -5700, 100, 0); static const unsigned int spkboost_tlv[] = { - TLV_DB_RANGE_HEAD(7), + TLV_DB_RANGE_HEAD(2), 0, 6, TLV_DB_SCALE_ITEM(0, 150, 0), 7, 7, TLV_DB_SCALE_ITEM(1200, 0, 0), }; -- cgit v0.10.2 From ef0cd47093a6c4b8a1f17d7be02a966f7805ff41 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sat, 19 Nov 2011 14:41:07 +0800 Subject: ASoC: cs4271: Fix wrong mask parameter in some snd_soc_update_bits calls Signed-off-by: Axel Lin Acked-by: Alexander Sverdlin Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/cs4271.c b/sound/soc/codecs/cs4271.c index 23d1bd5..69fde15 100644 --- a/sound/soc/codecs/cs4271.c +++ b/sound/soc/codecs/cs4271.c @@ -434,7 +434,8 @@ static int cs4271_soc_suspend(struct snd_soc_codec *codec, pm_message_t mesg) { int ret; /* Set power-down bit */ - ret = snd_soc_update_bits(codec, CS4271_MODE2, 0, CS4271_MODE2_PDN); + ret = snd_soc_update_bits(codec, CS4271_MODE2, CS4271_MODE2_PDN, + CS4271_MODE2_PDN); if (ret < 0) return ret; return 0; @@ -501,8 +502,9 @@ static int cs4271_probe(struct snd_soc_codec *codec) return ret; } - ret = snd_soc_update_bits(codec, CS4271_MODE2, 0, - CS4271_MODE2_PDN | CS4271_MODE2_CPEN); + ret = snd_soc_update_bits(codec, CS4271_MODE2, + CS4271_MODE2_PDN | CS4271_MODE2_CPEN, + CS4271_MODE2_PDN | CS4271_MODE2_CPEN); if (ret < 0) return ret; ret = snd_soc_update_bits(codec, CS4271_MODE2, CS4271_MODE2_PDN, 0); -- cgit v0.10.2 From dd179946db2493646955efc112d73c85b3cafcb1 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 16 Aug 2011 15:31:30 +0100 Subject: VFS: Log the fact that we've given ELOOP rather than creating a loop To prevent an NFS server from being used to create a directory loop in an NFS superblock on the client, the following patch was committed: commit 1836750115f20b774e55c032a3893e8c5bdf41ed Author: Al Viro Date: Tue Jul 12 21:42:24 2011 -0400 Subject: fix loop checks in d_materialise_unique() This causes ELOOP to be reported to anyone trying to access the dentry that would otherwise cause the kernel to complete the loop. However, no indication is given to the caller as to why an operation that ought to work doesn't. The fault is with the kernel, which doesn't want to try and solve the problem as it gets horrendously messy if there's another mountpoint somewhere in the trees being spliced that can't be moved[*]. [*] The real problem is that we don't handle the excision of a subtree that gets moved _out_ of what we can see. This can happen on the server where a directory is merely moved between two other dirs on the same filesystem, but where destination dir is not accessible by the client. So, given the choice to return ELOOP rather than trying to reconfigure the dentry tree, we should give the caller some indication of why they aren't being allowed to make what should be a legitimate request and log a message. Signed-off-by: David Howells Acked-by: Sachin Prabhu Signed-off-by: Al Viro diff --git a/fs/dcache.c b/fs/dcache.c index a901c69..10ba92d 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -36,6 +36,7 @@ #include #include #include +#include #include "internal.h" /* @@ -2383,8 +2384,16 @@ struct dentry *d_materialise_unique(struct dentry *dentry, struct inode *inode) actual = __d_unalias(inode, dentry, alias); } write_sequnlock(&rename_lock); - if (IS_ERR(actual)) + if (IS_ERR(actual)) { + if (PTR_ERR(actual) == -ELOOP) + pr_warn_ratelimited( + "VFS: Lookup of '%s' in %s %s" + " would have caused loop\n", + dentry->d_name.name, + inode->i_sb->s_type->name, + inode->i_sb->s_id); dput(alias); + } goto out_nolock; } } -- cgit v0.10.2 From 274252862f386b7868f35bf5ceaa5391a8ccfdf3 Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Wed, 16 Nov 2011 18:28:01 +0100 Subject: crypto: mv_cesa - fix hashing of chunks > 1920 bytes This was broken by commit 7759995c75ae0cbd4c861582908449f6b6208e7a (yes, myself). The basic problem here is since the digest state is only saved after the last chunk, the state array is only valid when handling the first chunk of the next buffer. Broken since linux-3.0. Signed-off-by: Phil Sutter Cc: # 3.1.x Signed-off-by: Herbert Xu diff --git a/drivers/crypto/mv_cesa.c b/drivers/crypto/mv_cesa.c index 3cf303e..38a3297 100644 --- a/drivers/crypto/mv_cesa.c +++ b/drivers/crypto/mv_cesa.c @@ -342,11 +342,13 @@ static void mv_process_hash_current(int first_block) else op.config |= CFG_MID_FRAG; - writel(req_ctx->state[0], cpg->reg + DIGEST_INITIAL_VAL_A); - writel(req_ctx->state[1], cpg->reg + DIGEST_INITIAL_VAL_B); - writel(req_ctx->state[2], cpg->reg + DIGEST_INITIAL_VAL_C); - writel(req_ctx->state[3], cpg->reg + DIGEST_INITIAL_VAL_D); - writel(req_ctx->state[4], cpg->reg + DIGEST_INITIAL_VAL_E); + if (first_block) { + writel(req_ctx->state[0], cpg->reg + DIGEST_INITIAL_VAL_A); + writel(req_ctx->state[1], cpg->reg + DIGEST_INITIAL_VAL_B); + writel(req_ctx->state[2], cpg->reg + DIGEST_INITIAL_VAL_C); + writel(req_ctx->state[3], cpg->reg + DIGEST_INITIAL_VAL_D); + writel(req_ctx->state[4], cpg->reg + DIGEST_INITIAL_VAL_E); + } } memcpy(cpg->sram + SRAM_CONFIG, &op, sizeof(struct sec_accel_config)); -- cgit v0.10.2 From 27533df80e93dc164e39d47281bbbd608f9014a6 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 20 Nov 2011 23:57:49 +0300 Subject: ALSA: cs5535 - Fix an endianness conversion desc->size is supposed to be a le16 type. On a big endian system the current code will set ->size to zero. We fixed a similar bug on the next line but missed this one. Signed-off-by: Dan Carpenter Signed-off-by: Takashi Iwai diff --git a/sound/pci/cs5535audio/cs5535audio_pcm.c b/sound/pci/cs5535audio/cs5535audio_pcm.c index e083122..dbf94b1 100644 --- a/sound/pci/cs5535audio/cs5535audio_pcm.c +++ b/sound/pci/cs5535audio/cs5535audio_pcm.c @@ -148,7 +148,7 @@ static int cs5535audio_build_dma_packets(struct cs5535audio *cs5535au, struct cs5535audio_dma_desc *desc = &((struct cs5535audio_dma_desc *) dma->desc_buf.area)[i]; desc->addr = cpu_to_le32(addr); - desc->size = cpu_to_le32(period_bytes); + desc->size = cpu_to_le16(period_bytes); desc->ctlreserved = cpu_to_le16(PRD_EOP); desc_addr += sizeof(struct cs5535audio_dma_desc); addr += period_bytes; -- cgit v0.10.2 From 11ed0ba1754841316d4095478944300acf19acc3 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 14 Nov 2011 17:24:58 +0100 Subject: ARM: 7161/1: errata: no automatic store buffer drain This patch implements a workaround for PL310 erratum 769419. On revisions of the PL310 prior to r3p2, the Store Buffer does not automatically drain. This can cause normal, non-cacheable writes to be retained when the memory system is idle, leading to suboptimal I/O performance for drivers using coherent DMA. This patch adds an optional wmb() call to the cpu_idle loop. On systems with an outer cache, this causes an explicit flush of the store buffer. Cc: stable@vger.kernel.org Acked-by: Catalin Marinas Tested-by: Marc Zyngier Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 44789ef..83aa746 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1352,6 +1352,18 @@ config ARM_ERRATA_764369 relevant cache maintenance functions and sets a specific bit in the diagnostic control register of the SCU. +config PL310_ERRATA_769419 + bool "PL310 errata: no automatic Store Buffer drain" + depends on CACHE_L2X0 + help + On revisions of the PL310 prior to r3p2, the Store Buffer does + not automatically drain. This can cause normal, non-cacheable + writes to be retained when the memory system is idle, leading + to suboptimal I/O performance for drivers using coherent DMA. + This option adds a write barrier to the cpu_idle loop so that, + on systems with an outer cache, the store buffer is drained + explicitly. + endmenu source "arch/arm/common/Kconfig" diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 75316f0..3d0c6fb 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -192,6 +192,9 @@ void cpu_idle(void) #endif local_irq_disable(); +#ifdef CONFIG_PL310_ERRATA_769419 + wmb(); +#endif if (hlt_counter) { local_irq_enable(); cpu_relax(); -- cgit v0.10.2 From fa0ce4035d4897b0642132866d896a906429f45e Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 14 Nov 2011 17:24:57 +0100 Subject: ARM: 7162/1: errata: tidy up Kconfig options for PL310 errata workarounds The Kconfig options for the PL310 errata workarounds do not use a consistent naming scheme for either the config option or the bool description. This patch tidies up the options by ensuring that the bool descriptions are prefixed with "PL310 errata:" and the config options are prefixed with PL310_ERRATA_, making it much clearer in menuconfig as to what the workarounds are for. Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 83aa746..e084b7e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1231,7 +1231,7 @@ config ARM_ERRATA_742231 capabilities of the processor. config PL310_ERRATA_588369 - bool "Clean & Invalidate maintenance operations do not invalidate clean lines" + bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines" depends on CACHE_L2X0 help The PL310 L2 cache controller implements three types of Clean & @@ -1256,7 +1256,7 @@ config ARM_ERRATA_720789 entries regardless of the ASID. config PL310_ERRATA_727915 - bool "Background Clean & Invalidate by Way operation can cause data corruption" + bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption" depends on CACHE_L2X0 help PL310 implements the Clean & Invalidate by Way L2 cache maintenance @@ -1289,8 +1289,8 @@ config ARM_ERRATA_751472 operation is received by a CPU before the ICIALLUIS has completed, potentially leading to corrupted entries in the cache or TLB. -config ARM_ERRATA_753970 - bool "ARM errata: cache sync operation may be faulty" +config PL310_ERRATA_753970 + bool "PL310 errata: cache sync operation may be faulty" depends on CACHE_PL310 help This option enables the workaround for the 753970 PL310 (r3p0) erratum. diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 8ac9e9f..b1e192b 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -61,7 +61,7 @@ static inline void cache_sync(void) { void __iomem *base = l2x0_base; -#ifdef CONFIG_ARM_ERRATA_753970 +#ifdef CONFIG_PL310_ERRATA_753970 /* write to an unmmapped register */ writel_relaxed(0, base + L2X0_DUMMY_REG); #else -- cgit v0.10.2 From 2674dd0b1c07d8b8dfb4872fc7b41841f05cb957 Mon Sep 17 00:00:00 2001 From: Javi Merino Date: Wed, 16 Nov 2011 12:21:24 +0100 Subject: ARM: 7163/2: PL330: Only register usable channels When the manager is running non-secure, the only channels that can issue interrupts are the ones that have a 1 in their corresponding bit in Configuration Register 3. The other ones will generate an abort when trying to signal the end of the transaction so they are useless in non-secure mode. Reference: <1320244259-10496-2-git-send-email-javi.merino@arm.com> Signed-off-by: Javi Merino Acked-by: Jassi Brar Signed-off-by: Russell King diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c index 7129cfb..f748a38 100644 --- a/arch/arm/common/pl330.c +++ b/arch/arm/common/pl330.c @@ -1623,6 +1623,11 @@ static inline int _alloc_event(struct pl330_thread *thrd) return -1; } +static bool _chan_ns(const struct pl330_info *pi, int i) +{ + return pi->pcfg.irq_ns & (1 << i); +} + /* Upon success, returns IdentityToken for the * allocated channel, NULL otherwise. */ @@ -1647,7 +1652,8 @@ void *pl330_request_channel(const struct pl330_info *pi) for (i = 0; i < chans; i++) { thrd = &pl330->channels[i]; - if (thrd->free) { + if ((thrd->free) && (!_manager_ns(thrd) || + _chan_ns(pi, i))) { thrd->ev = _alloc_event(thrd); if (thrd->ev >= 0) { thrd->free = false; -- cgit v0.10.2 From 1c8a7c1fbfc7ae2362d26559df26b99c806b68b5 Mon Sep 17 00:00:00 2001 From: Javi Merino Date: Wed, 16 Nov 2011 12:45:39 +0100 Subject: ARM: 7165/2: PL330: Fix typo in _prepare_ccr() scctl should be shifted by CC_SRCCTRL_SHFT and dcctl by CC_DSTCCTRL_SHFT, not the other way round. Reference: <1320244259-10496-4-git-send-email-javi.merino@arm.com> Signed-off-by: Javi Merino Acked-by: Jassi Brar Signed-off-by: Russell King diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c index f748a38..f407a6b 100644 --- a/arch/arm/common/pl330.c +++ b/arch/arm/common/pl330.c @@ -1211,8 +1211,8 @@ static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc) ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT); ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT); - ccr |= (rqc->dcctl << CC_SRCCCTRL_SHFT); - ccr |= (rqc->scctl << CC_DSTCCTRL_SHFT); + ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT); + ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT); ccr |= (rqc->swap << CC_SWAP_SHFT); -- cgit v0.10.2 From 53cbcbcf4362ef39e0a692b1d23c395999397fca Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 17 Nov 2011 13:11:21 +0100 Subject: ARM: 7166/1: Use PMD_SHIFT instead of PGDIR_SHIFT in dma-consistent.c Commit 99d1717d (ARM: Add init_consistent_dma_size()) introduces dynamic allocation of the consistent_pte array. The number of PTEs should be calculated based on the number of PMD entries rather than PGD, hence the PMD_SHIFT. Signed-off-by: Catalin Marinas Cc: Jon Medhurst Acked-by: Nicolas Pitre Signed-off-by: Russell King diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index e4e7f6c..ab58456 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -168,7 +168,7 @@ static int __init consistent_init(void) pte_t *pte; int i = 0; unsigned long base = consistent_base; - unsigned long num_ptes = (CONSISTENT_END - base) >> PGDIR_SHIFT; + unsigned long num_ptes = (CONSISTENT_END - base) >> PMD_SHIFT; consistent_pte = kmalloc(num_ptes * sizeof(pte_t), GFP_KERNEL); if (!consistent_pte) { -- cgit v0.10.2 From ed3e80c4c991a52f9fce3421536a78e331ae0949 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 21 Nov 2011 11:55:41 +0000 Subject: ASoC: Ensure WM8731 register cache is synced when resuming from disabled Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c index 7e5ec03..a7c9ae1 100644 --- a/sound/soc/codecs/wm8731.c +++ b/sound/soc/codecs/wm8731.c @@ -453,6 +453,7 @@ static int wm8731_set_bias_level(struct snd_soc_codec *codec, snd_soc_write(codec, WM8731_PWR, 0xffff); regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies); + codec->cache_sync = 1; break; } codec->dapm.bias_level = level; -- cgit v0.10.2 From 6e58ad69efe9f4c91eb15f6bc365293414c397ce Mon Sep 17 00:00:00 2001 From: Yongqiang Yang Date: Mon, 21 Nov 2011 12:09:19 -0500 Subject: ext4: fix up a undefined error in ext4_free_blocks in debugging code sbi is not defined, so let ext4_free_blocks use EXT4_SB(sb) instead when EXT4FS_DEBUG is defined. Signed-off-by: Yongqiang Yang diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c index f6dba45..12ccacd 100644 --- a/fs/ext4/balloc.c +++ b/fs/ext4/balloc.c @@ -565,7 +565,7 @@ ext4_fsblk_t ext4_count_free_clusters(struct super_block *sb) brelse(bitmap_bh); printk(KERN_DEBUG "ext4_count_free_clusters: stored = %llu" ", computed = %llu, %llu\n", - EXT4_B2C(sbi, ext4_free_blocks_count(es)), + EXT4_B2C(EXT4_SB(sb), ext4_free_blocks_count(es)), desc_count, bitmap_count); return bitmap_count; #else -- cgit v0.10.2 From 648ae8e53d58ed1b667db173a2d4ff2132a3b529 Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Wed, 9 Nov 2011 19:37:35 +0100 Subject: netfilter: ipset: suppress compile-time warnings in ip_set_hash_ipport*.c warning: 'ip_to' may be used uninitialized in this function Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/ipset/ip_set_hash_ipport.c b/net/netfilter/ipset/ip_set_hash_ipport.c index 6ee10f5..37d667e 100644 --- a/net/netfilter/ipset/ip_set_hash_ipport.c +++ b/net/netfilter/ipset/ip_set_hash_ipport.c @@ -158,7 +158,7 @@ hash_ipport4_uadt(struct ip_set *set, struct nlattr *tb[], const struct ip_set_hash *h = set->data; ipset_adtfn adtfn = set->variant->adt[adt]; struct hash_ipport4_elem data = { }; - u32 ip, ip_to, p = 0, port, port_to; + u32 ip, ip_to = 0, p = 0, port, port_to; u32 timeout = h->timeout; bool with_ports = false; int ret; diff --git a/net/netfilter/ipset/ip_set_hash_ipportip.c b/net/netfilter/ipset/ip_set_hash_ipportip.c index fb90e34..e69e271 100644 --- a/net/netfilter/ipset/ip_set_hash_ipportip.c +++ b/net/netfilter/ipset/ip_set_hash_ipportip.c @@ -162,7 +162,7 @@ hash_ipportip4_uadt(struct ip_set *set, struct nlattr *tb[], const struct ip_set_hash *h = set->data; ipset_adtfn adtfn = set->variant->adt[adt]; struct hash_ipportip4_elem data = { }; - u32 ip, ip_to, p = 0, port, port_to; + u32 ip, ip_to = 0, p = 0, port, port_to; u32 timeout = h->timeout; bool with_ports = false; int ret; diff --git a/net/netfilter/ipset/ip_set_hash_ipportnet.c b/net/netfilter/ipset/ip_set_hash_ipportnet.c index deb3e3d..64199b4 100644 --- a/net/netfilter/ipset/ip_set_hash_ipportnet.c +++ b/net/netfilter/ipset/ip_set_hash_ipportnet.c @@ -184,7 +184,7 @@ hash_ipportnet4_uadt(struct ip_set *set, struct nlattr *tb[], const struct ip_set_hash *h = set->data; ipset_adtfn adtfn = set->variant->adt[adt]; struct hash_ipportnet4_elem data = { .cidr = HOST_MASK }; - u32 ip, ip_to, p = 0, port, port_to; + u32 ip, ip_to = 0, p = 0, port, port_to; u32 ip2_from = 0, ip2_to, ip2_last, ip2; u32 timeout = h->timeout; bool with_ports = false; -- cgit v0.10.2 From 5e2afba4ecd7931ea06e6fa116ab28e6943dbd42 Mon Sep 17 00:00:00 2001 From: Paul Guo Date: Mon, 14 Nov 2011 19:00:54 +0800 Subject: netfilter: possible unaligned packet header in ip_route_me_harder This patch tries to fix the following issue in netfilter: In ip_route_me_harder(), we invoke pskb_expand_head() that rellocates new header with additional head room which can break the alignment of the original packet header. In one of my NAT test case, the NIC port for internal hosts is configured with vlan and the port for external hosts is with general configuration. If we ping an external "unknown" hosts from an internal host, an icmp packet will be sent. We find that in icmp_send()->...->ip_route_me_harder()->pskb_expand_head(), hh_len=18 and current headroom (skb_headroom(skb)) of the packet is 16. After calling pskb_expand_head() the packet header becomes to be unaligned and then our system (arch/tile) panics immediately. Signed-off-by: Paul Guo Acked-by: Eric Dumazet Signed-off-by: Pablo Neira Ayuso diff --git a/net/ipv4/netfilter.c b/net/ipv4/netfilter.c index 9899619..4f47e06 100644 --- a/net/ipv4/netfilter.c +++ b/net/ipv4/netfilter.c @@ -64,7 +64,8 @@ int ip_route_me_harder(struct sk_buff *skb, unsigned addr_type) /* Change in oif may mean change in hh_len. */ hh_len = skb_dst(skb)->dev->hard_header_len; if (skb_headroom(skb) < hh_len && - pskb_expand_head(skb, hh_len - skb_headroom(skb), 0, GFP_ATOMIC)) + pskb_expand_head(skb, HH_DATA_ALIGN(hh_len - skb_headroom(skb)), + 0, GFP_ATOMIC)) return -1; return 0; -- cgit v0.10.2 From 404ba2b8f611bea3228daf031f03901d0c34ecd7 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 21 Nov 2011 17:57:25 +0000 Subject: gpio: pca953x: Staticise pca953x_get_altdata() It's not used outside of the driver so doesn't need to be exported, and sparse notices this and complains about it. Signed-off-by: Mark Brown diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index 147df8a..d3f3e8f 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -546,7 +546,7 @@ static void pca953x_irq_teardown(struct pca953x_chip *chip) * Translate OpenFirmware node properties into platform_data * WARNING: This is DEPRECATED and will be removed eventually! */ -void +static void pca953x_get_alt_pdata(struct i2c_client *client, int *gpio_base, int *invert) { struct device_node *node; @@ -574,7 +574,7 @@ pca953x_get_alt_pdata(struct i2c_client *client, int *gpio_base, int *invert) *invert = *val; } #else -void +static void pca953x_get_alt_pdata(struct i2c_client *client, int *gpio_base, int *invert) { *gpio_base = -1; -- cgit v0.10.2 From 24a70313969fc3fc440216b40babdb42564acff3 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Mon, 21 Nov 2011 09:39:11 -0500 Subject: Btrfs: remove free-space-cache.c WARN during log replay The log replay code only partially loads block groups, since the block group caching code is able to detect and deal with extents the logging code has pinned down. While the logging code is pinning down block groups, there is a bogus WARN_ON we're hitting if the code wasn't able to find an extent in the cache. This commit removes the warning because it can happen any time there isn't a valid free space cache for that block group. Signed-off-by: Chris Mason diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index aedacdb..6e5b7e4 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -1849,7 +1849,13 @@ again: info = tree_search_offset(ctl, offset_to_bitmap(ctl, offset), 1, 0); if (!info) { - WARN_ON(1); + /* the tree logging code might be calling us before we + * have fully loaded the free space rbtree for this + * block group. So it is possible the entry won't + * be in the rbtree yet at all. The caching code + * will make sure not to put it in the rbtree if + * the logging code has pinned it. + */ goto out_lock; } } -- cgit v0.10.2 From cc11f9edd919002d8b3a03601a181a449150defd Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 21 Nov 2011 03:52:18 +0000 Subject: fix braino in um patchset (mea culpa) wrong register returned... Signed-off-by: Al Viro Signed-off-by: Linus Torvalds diff --git a/arch/x86/um/asm/processor.h b/arch/x86/um/asm/processor.h index 118c143..2c32df6 100644 --- a/arch/x86/um/asm/processor.h +++ b/arch/x86/um/asm/processor.h @@ -11,7 +11,7 @@ #endif #define KSTK_EIP(tsk) KSTK_REG(tsk, HOST_IP) -#define KSTK_ESP(tsk) KSTK_REG(tsk, HOST_IP) +#define KSTK_ESP(tsk) KSTK_REG(tsk, HOST_SP) #define KSTK_EBP(tsk) KSTK_REG(tsk, HOST_BP) #define ARCH_IS_STACKGROW(address) \ -- cgit v0.10.2 From c332c10c01d8d31f2eba9abc04b0fc3d62610ed8 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 21 Nov 2011 16:48:28 -0500 Subject: microblaze: bury asm/namei.h altroot support has been gone for years, along with arch/*/asm/namei.h; looks like a dummy survivor that sat it out in microblaze tree... Signed-off-by: Al Viro diff --git a/arch/microblaze/include/asm/namei.h b/arch/microblaze/include/asm/namei.h deleted file mode 100644 index 61d60b8..0000000 --- a/arch/microblaze/include/asm/namei.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_NAMEI_H -#define _ASM_MICROBLAZE_NAMEI_H - -#ifdef __KERNEL__ - -/* This dummy routine maybe changed to something useful - * for /usr/gnemul/ emulation stuff. - * Look at asm-sparc/namei.h for details. - */ -#define __emul_prefix() NULL - -#endif /* __KERNEL__ */ - -#endif /* _ASM_MICROBLAZE_NAMEI_H */ -- cgit v0.10.2 From b46413367961c2e8bd827e067a231be982aaeee2 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 21 Nov 2011 17:25:37 -0500 Subject: iio: fix a leak due to improper use of anon_inode_getfd() it can fail and in that case ->release() will *not* be called... Signed-off-by: Al Viro diff --git a/drivers/staging/iio/industrialio-core.c b/drivers/staging/iio/industrialio-core.c index 326e967..2656409 100644 --- a/drivers/staging/iio/industrialio-core.c +++ b/drivers/staging/iio/industrialio-core.c @@ -242,6 +242,8 @@ static const struct file_operations iio_event_chrdev_fileops = { static int iio_event_getfd(struct iio_dev *indio_dev) { + int fd; + if (indio_dev->event_interface == NULL) return -ENODEV; @@ -252,9 +254,15 @@ static int iio_event_getfd(struct iio_dev *indio_dev) return -EBUSY; } mutex_unlock(&indio_dev->event_interface->event_list_lock); - return anon_inode_getfd("iio:event", + fd = anon_inode_getfd("iio:event", &iio_event_chrdev_fileops, indio_dev->event_interface, O_RDONLY); + if (fd < 0) { + mutex_lock(&indio_dev->event_interface->event_list_lock); + clear_bit(IIO_BUSY_BIT_POS, &ev_int->flags); + mutex_unlock(&indio_dev->event_interface->event_list_lock); + } + return fd; } static int __init iio_init(void) -- cgit v0.10.2 From 70e9942f17a6193e9172a804e6569a8806633d6b Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 22 Nov 2011 00:16:51 +0100 Subject: netfilter: nf_conntrack: make event callback registration per-netns This patch fixes an oops that can be triggered following this recipe: 0) make sure nf_conntrack_netlink and nf_conntrack_ipv4 are loaded. 1) container is started. 2) connect to it via lxc-console. 3) generate some traffic with the container to create some conntrack entries in its table. 4) stop the container: you hit one oops because the conntrack table cleanup tries to report the destroy event to user-space but the per-netns nfnetlink socket has already gone (as the nfnetlink socket is per-netns but event callback registration is global). To fix this situation, we make the ctnl_notifier per-netns so the callback is registered/unregistered if the container is created/destroyed. Alex Bligh and Alexey Dobriyan originally proposed one small patch to check if the nfnetlink socket is gone in nfnetlink_has_listeners, but this is a very visited path for events, thus, it may reduce performance and it looks a bit hackish to check for the nfnetlink socket only to workaround this situation. As a result, I decided to follow the bigger path choice, which seems to look nicer to me. Cc: Alexey Dobriyan Reported-by: Alex Bligh Signed-off-by: Pablo Neira Ayuso diff --git a/include/net/netfilter/nf_conntrack_ecache.h b/include/net/netfilter/nf_conntrack_ecache.h index 4283508..a88fb69 100644 --- a/include/net/netfilter/nf_conntrack_ecache.h +++ b/include/net/netfilter/nf_conntrack_ecache.h @@ -67,18 +67,18 @@ struct nf_ct_event_notifier { int (*fcn)(unsigned int events, struct nf_ct_event *item); }; -extern struct nf_ct_event_notifier __rcu *nf_conntrack_event_cb; -extern int nf_conntrack_register_notifier(struct nf_ct_event_notifier *nb); -extern void nf_conntrack_unregister_notifier(struct nf_ct_event_notifier *nb); +extern int nf_conntrack_register_notifier(struct net *net, struct nf_ct_event_notifier *nb); +extern void nf_conntrack_unregister_notifier(struct net *net, struct nf_ct_event_notifier *nb); extern void nf_ct_deliver_cached_events(struct nf_conn *ct); static inline void nf_conntrack_event_cache(enum ip_conntrack_events event, struct nf_conn *ct) { + struct net *net = nf_ct_net(ct); struct nf_conntrack_ecache *e; - if (nf_conntrack_event_cb == NULL) + if (net->ct.nf_conntrack_event_cb == NULL) return; e = nf_ct_ecache_find(ct); @@ -95,11 +95,12 @@ nf_conntrack_eventmask_report(unsigned int eventmask, int report) { int ret = 0; + struct net *net = nf_ct_net(ct); struct nf_ct_event_notifier *notify; struct nf_conntrack_ecache *e; rcu_read_lock(); - notify = rcu_dereference(nf_conntrack_event_cb); + notify = rcu_dereference(net->ct.nf_conntrack_event_cb); if (notify == NULL) goto out_unlock; @@ -164,9 +165,8 @@ struct nf_exp_event_notifier { int (*fcn)(unsigned int events, struct nf_exp_event *item); }; -extern struct nf_exp_event_notifier __rcu *nf_expect_event_cb; -extern int nf_ct_expect_register_notifier(struct nf_exp_event_notifier *nb); -extern void nf_ct_expect_unregister_notifier(struct nf_exp_event_notifier *nb); +extern int nf_ct_expect_register_notifier(struct net *net, struct nf_exp_event_notifier *nb); +extern void nf_ct_expect_unregister_notifier(struct net *net, struct nf_exp_event_notifier *nb); static inline void nf_ct_expect_event_report(enum ip_conntrack_expect_events event, @@ -174,11 +174,12 @@ nf_ct_expect_event_report(enum ip_conntrack_expect_events event, u32 pid, int report) { + struct net *net = nf_ct_exp_net(exp); struct nf_exp_event_notifier *notify; struct nf_conntrack_ecache *e; rcu_read_lock(); - notify = rcu_dereference(nf_expect_event_cb); + notify = rcu_dereference(net->ct.nf_expect_event_cb); if (notify == NULL) goto out_unlock; diff --git a/include/net/netns/conntrack.h b/include/net/netns/conntrack.h index 0249399..7a911ec 100644 --- a/include/net/netns/conntrack.h +++ b/include/net/netns/conntrack.h @@ -18,6 +18,8 @@ struct netns_ct { struct hlist_nulls_head unconfirmed; struct hlist_nulls_head dying; struct ip_conntrack_stat __percpu *stat; + struct nf_ct_event_notifier __rcu *nf_conntrack_event_cb; + struct nf_exp_event_notifier __rcu *nf_expect_event_cb; int sysctl_events; unsigned int sysctl_events_retry_timeout; int sysctl_acct; diff --git a/net/netfilter/nf_conntrack_ecache.c b/net/netfilter/nf_conntrack_ecache.c index 6b368be..b62c414 100644 --- a/net/netfilter/nf_conntrack_ecache.c +++ b/net/netfilter/nf_conntrack_ecache.c @@ -27,22 +27,17 @@ static DEFINE_MUTEX(nf_ct_ecache_mutex); -struct nf_ct_event_notifier __rcu *nf_conntrack_event_cb __read_mostly; -EXPORT_SYMBOL_GPL(nf_conntrack_event_cb); - -struct nf_exp_event_notifier __rcu *nf_expect_event_cb __read_mostly; -EXPORT_SYMBOL_GPL(nf_expect_event_cb); - /* deliver cached events and clear cache entry - must be called with locally * disabled softirqs */ void nf_ct_deliver_cached_events(struct nf_conn *ct) { + struct net *net = nf_ct_net(ct); unsigned long events; struct nf_ct_event_notifier *notify; struct nf_conntrack_ecache *e; rcu_read_lock(); - notify = rcu_dereference(nf_conntrack_event_cb); + notify = rcu_dereference(net->ct.nf_conntrack_event_cb); if (notify == NULL) goto out_unlock; @@ -83,19 +78,20 @@ out_unlock: } EXPORT_SYMBOL_GPL(nf_ct_deliver_cached_events); -int nf_conntrack_register_notifier(struct nf_ct_event_notifier *new) +int nf_conntrack_register_notifier(struct net *net, + struct nf_ct_event_notifier *new) { int ret = 0; struct nf_ct_event_notifier *notify; mutex_lock(&nf_ct_ecache_mutex); - notify = rcu_dereference_protected(nf_conntrack_event_cb, + notify = rcu_dereference_protected(net->ct.nf_conntrack_event_cb, lockdep_is_held(&nf_ct_ecache_mutex)); if (notify != NULL) { ret = -EBUSY; goto out_unlock; } - RCU_INIT_POINTER(nf_conntrack_event_cb, new); + RCU_INIT_POINTER(net->ct.nf_conntrack_event_cb, new); mutex_unlock(&nf_ct_ecache_mutex); return ret; @@ -105,32 +101,34 @@ out_unlock: } EXPORT_SYMBOL_GPL(nf_conntrack_register_notifier); -void nf_conntrack_unregister_notifier(struct nf_ct_event_notifier *new) +void nf_conntrack_unregister_notifier(struct net *net, + struct nf_ct_event_notifier *new) { struct nf_ct_event_notifier *notify; mutex_lock(&nf_ct_ecache_mutex); - notify = rcu_dereference_protected(nf_conntrack_event_cb, + notify = rcu_dereference_protected(net->ct.nf_conntrack_event_cb, lockdep_is_held(&nf_ct_ecache_mutex)); BUG_ON(notify != new); - RCU_INIT_POINTER(nf_conntrack_event_cb, NULL); + RCU_INIT_POINTER(net->ct.nf_conntrack_event_cb, NULL); mutex_unlock(&nf_ct_ecache_mutex); } EXPORT_SYMBOL_GPL(nf_conntrack_unregister_notifier); -int nf_ct_expect_register_notifier(struct nf_exp_event_notifier *new) +int nf_ct_expect_register_notifier(struct net *net, + struct nf_exp_event_notifier *new) { int ret = 0; struct nf_exp_event_notifier *notify; mutex_lock(&nf_ct_ecache_mutex); - notify = rcu_dereference_protected(nf_expect_event_cb, + notify = rcu_dereference_protected(net->ct.nf_expect_event_cb, lockdep_is_held(&nf_ct_ecache_mutex)); if (notify != NULL) { ret = -EBUSY; goto out_unlock; } - RCU_INIT_POINTER(nf_expect_event_cb, new); + RCU_INIT_POINTER(net->ct.nf_expect_event_cb, new); mutex_unlock(&nf_ct_ecache_mutex); return ret; @@ -140,15 +138,16 @@ out_unlock: } EXPORT_SYMBOL_GPL(nf_ct_expect_register_notifier); -void nf_ct_expect_unregister_notifier(struct nf_exp_event_notifier *new) +void nf_ct_expect_unregister_notifier(struct net *net, + struct nf_exp_event_notifier *new) { struct nf_exp_event_notifier *notify; mutex_lock(&nf_ct_ecache_mutex); - notify = rcu_dereference_protected(nf_expect_event_cb, + notify = rcu_dereference_protected(net->ct.nf_expect_event_cb, lockdep_is_held(&nf_ct_ecache_mutex)); BUG_ON(notify != new); - RCU_INIT_POINTER(nf_expect_event_cb, NULL); + RCU_INIT_POINTER(net->ct.nf_expect_event_cb, NULL); mutex_unlock(&nf_ct_ecache_mutex); } EXPORT_SYMBOL_GPL(nf_ct_expect_unregister_notifier); diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index e58aa9b..ef21b22 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -4,7 +4,7 @@ * (C) 2001 by Jay Schulist * (C) 2002-2006 by Harald Welte * (C) 2003 by Patrick Mchardy - * (C) 2005-2008 by Pablo Neira Ayuso + * (C) 2005-2011 by Pablo Neira Ayuso * * Initial connection tracking via netlink development funded and * generally made possible by Network Robots, Inc. (www.networkrobots.com) @@ -2163,6 +2163,54 @@ MODULE_ALIAS("ip_conntrack_netlink"); MODULE_ALIAS_NFNL_SUBSYS(NFNL_SUBSYS_CTNETLINK); MODULE_ALIAS_NFNL_SUBSYS(NFNL_SUBSYS_CTNETLINK_EXP); +static int __net_init ctnetlink_net_init(struct net *net) +{ +#ifdef CONFIG_NF_CONNTRACK_EVENTS + int ret; + + ret = nf_conntrack_register_notifier(net, &ctnl_notifier); + if (ret < 0) { + pr_err("ctnetlink_init: cannot register notifier.\n"); + goto err_out; + } + + ret = nf_ct_expect_register_notifier(net, &ctnl_notifier_exp); + if (ret < 0) { + pr_err("ctnetlink_init: cannot expect register notifier.\n"); + goto err_unreg_notifier; + } +#endif + return 0; + +#ifdef CONFIG_NF_CONNTRACK_EVENTS +err_unreg_notifier: + nf_conntrack_unregister_notifier(net, &ctnl_notifier); +err_out: + return ret; +#endif +} + +static void ctnetlink_net_exit(struct net *net) +{ +#ifdef CONFIG_NF_CONNTRACK_EVENTS + nf_ct_expect_unregister_notifier(net, &ctnl_notifier_exp); + nf_conntrack_unregister_notifier(net, &ctnl_notifier); +#endif +} + +static void __net_exit ctnetlink_net_exit_batch(struct list_head *net_exit_list) +{ + struct net *net; + + list_for_each_entry(net, net_exit_list, exit_list) + ctnetlink_net_exit(net); +} + +static struct pernet_operations ctnetlink_net_ops = { + .init = ctnetlink_net_init, + .exit_batch = ctnetlink_net_exit_batch, +}; + static int __init ctnetlink_init(void) { int ret; @@ -2180,28 +2228,15 @@ static int __init ctnetlink_init(void) goto err_unreg_subsys; } -#ifdef CONFIG_NF_CONNTRACK_EVENTS - ret = nf_conntrack_register_notifier(&ctnl_notifier); - if (ret < 0) { - pr_err("ctnetlink_init: cannot register notifier.\n"); + if (register_pernet_subsys(&ctnetlink_net_ops)) { + pr_err("ctnetlink_init: cannot register pernet operations\n"); goto err_unreg_exp_subsys; } - ret = nf_ct_expect_register_notifier(&ctnl_notifier_exp); - if (ret < 0) { - pr_err("ctnetlink_init: cannot expect register notifier.\n"); - goto err_unreg_notifier; - } -#endif - return 0; -#ifdef CONFIG_NF_CONNTRACK_EVENTS -err_unreg_notifier: - nf_conntrack_unregister_notifier(&ctnl_notifier); err_unreg_exp_subsys: nfnetlink_subsys_unregister(&ctnl_exp_subsys); -#endif err_unreg_subsys: nfnetlink_subsys_unregister(&ctnl_subsys); err_out: @@ -2213,11 +2248,7 @@ static void __exit ctnetlink_exit(void) pr_info("ctnetlink: unregistering from nfnetlink.\n"); nf_ct_remove_userspace_expectations(); -#ifdef CONFIG_NF_CONNTRACK_EVENTS - nf_ct_expect_unregister_notifier(&ctnl_notifier_exp); - nf_conntrack_unregister_notifier(&ctnl_notifier); -#endif - + unregister_pernet_subsys(&ctnetlink_net_ops); nfnetlink_subsys_unregister(&ctnl_exp_subsys); nfnetlink_subsys_unregister(&ctnl_subsys); } -- cgit v0.10.2 From 74a0efdef1df7f576116811234ebedd8a1255ebc Mon Sep 17 00:00:00 2001 From: "Manjunathappa, Prakash" Date: Tue, 15 Nov 2011 17:32:23 +0530 Subject: video:da8xx-fb: Disable and reset sequence on version2 of LCDC Patch follows the disable and software reset sequence specified in version2 to LCDC functional specification. Without this flicker is observed on re-enabling the LCDC. Signed-off-by: Manjunathappa, Prakash Signed-off-by: Florian Tobias Schandinat diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c index 55f91d9..29577bf 100644 --- a/drivers/video/da8xx-fb.c +++ b/drivers/video/da8xx-fb.c @@ -116,6 +116,7 @@ /* Clock registers available only on Version 2 */ #define LCD_CLK_ENABLE_REG 0x6c #define LCD_CLK_RESET_REG 0x70 +#define LCD_CLK_MAIN_RESET BIT(3) #define LCD_NUM_BUFFERS 2 @@ -244,6 +245,10 @@ static inline void lcd_enable_raster(void) { u32 reg; + /* Bring LCDC out of reset */ + if (lcd_revision == LCD_VERSION_2) + lcdc_write(0, LCD_CLK_RESET_REG); + reg = lcdc_read(LCD_RASTER_CTRL_REG); if (!(reg & LCD_RASTER_ENABLE)) lcdc_write(reg | LCD_RASTER_ENABLE, LCD_RASTER_CTRL_REG); @@ -257,6 +262,10 @@ static inline void lcd_disable_raster(void) reg = lcdc_read(LCD_RASTER_CTRL_REG); if (reg & LCD_RASTER_ENABLE) lcdc_write(reg & ~LCD_RASTER_ENABLE, LCD_RASTER_CTRL_REG); + + if (lcd_revision == LCD_VERSION_2) + /* Write 1 to reset LCDC */ + lcdc_write(LCD_CLK_MAIN_RESET, LCD_CLK_RESET_REG); } static void lcd_blit(int load_mode, struct da8xx_fb_par *par) @@ -584,8 +593,12 @@ static void lcd_reset(struct da8xx_fb_par *par) lcdc_write(0, LCD_DMA_CTRL_REG); lcdc_write(0, LCD_RASTER_CTRL_REG); - if (lcd_revision == LCD_VERSION_2) + if (lcd_revision == LCD_VERSION_2) { lcdc_write(0, LCD_INT_ENABLE_SET_REG); + /* Write 1 to reset */ + lcdc_write(LCD_CLK_MAIN_RESET, LCD_CLK_RESET_REG); + lcdc_write(0, LCD_CLK_RESET_REG); + } } static void lcd_calc_clk_divider(struct da8xx_fb_par *par) -- cgit v0.10.2 From a32839696a8eef813a1aff604fbad9a32dff6c95 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Mon, 21 Nov 2011 15:05:56 +0000 Subject: viafb: correct sync polarity for OLPC DCON While the OLPC display appears to be able to handle either positive or negative sync, the Display Controller only recognises positive sync. This brings viafb (for XO-1.5) in line with lxfb (for XO-1) and fixes a recent regression where the XO-1.5 DCON could no longer be frozen. Thanks to Florian Tobias Schandinat for helping identify the fix. Test case: from a vt, echo 1 > /sys/devices/platform/dcon/freeze should cause the current screen contents to freeze, rather than garbage being displayed. Signed-off-by: Daniel Drake Signed-off-by: Florian Tobias Schandinat Cc: stable@kernel.org diff --git a/drivers/video/via/share.h b/drivers/video/via/share.h index 69d882c..c01c1c1 100644 --- a/drivers/video/via/share.h +++ b/drivers/video/via/share.h @@ -559,8 +559,8 @@ #define M1200X720_R60_VSP POSITIVE /* 1200x900@60 Sync Polarity (DCON) */ -#define M1200X900_R60_HSP NEGATIVE -#define M1200X900_R60_VSP NEGATIVE +#define M1200X900_R60_HSP POSITIVE +#define M1200X900_R60_VSP POSITIVE /* 1280x600@60 Sync Polarity (GTF Mode) */ #define M1280x600_R60_HSP NEGATIVE -- cgit v0.10.2 From 05c7cc9ccab7d9229fdae68d7d6231edd2c93741 Mon Sep 17 00:00:00 2001 From: Adrian Knoth Date: Mon, 21 Nov 2011 16:15:36 +0100 Subject: ALSA: hdspm - Fix PCI ID for PCIe RME MADI cards Commit c09403dcc5698abf214329fbbf3cf8dbb5558bea has introduced a regression: PCIe versions of RME MADI were no longer detected, because the MADIface ID (0xd5) was used instead of the correct 0xd2. This commit fixes the problem. Signed-off-by: Adrian Knoth Signed-off-by: Takashi Iwai diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index e760ada..19ee220 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -6518,7 +6518,7 @@ static int __devinit snd_hdspm_create(struct snd_card *card, hdspm->io_type = AES32; hdspm->card_name = "RME AES32"; hdspm->midiPorts = 2; - } else if ((hdspm->firmware_rev == 0xd5) || + } else if ((hdspm->firmware_rev == 0xd2) || ((hdspm->firmware_rev >= 0xc8) && (hdspm->firmware_rev <= 0xcf))) { hdspm->io_type = MADI; -- cgit v0.10.2 From e760b5260d39113794da17c64cbd6e6311155b66 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Mon, 21 Nov 2011 14:34:05 +0100 Subject: ARM: imx: drop 'ARCH_MX31' and 'ARCH_MX35' Commit 27ad4bf72a ("ARM: imx: move mx3 support to mach-imx") kept ARCH_MX31 and ARCH_MX35 'for compatibility'. Now that they aren't actually used anymore, they can be dropped entirely. Signed-off-by: Paul Bolle Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 5f7f9c2..c44aa97 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -10,11 +10,6 @@ config HAVE_IMX_MMDC config HAVE_IMX_SRC bool -# -# ARCH_MX31 and ARCH_MX35 are left for compatibility -# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2. -# To easily distinguish good and reviewed from unreviewed usages new (and IMHO -# more sensible) names are used: SOC_IMX31 and SOC_IMX35 config ARCH_MX1 bool @@ -27,12 +22,6 @@ config ARCH_MX25 config MACH_MX27 bool -config ARCH_MX31 - bool - -config ARCH_MX35 - bool - config SOC_IMX1 bool select ARCH_MX1 @@ -72,7 +61,6 @@ config SOC_IMX31 select CPU_V6 select IMX_HAVE_PLATFORM_MXC_RNGA select ARCH_MXC_AUDMUX_V2 - select ARCH_MX31 select MXC_AVIC select SMP_ON_UP if SMP @@ -82,7 +70,6 @@ config SOC_IMX35 select ARCH_MXC_IOMUX_V3 select ARCH_MXC_AUDMUX_V2 select HAVE_EPIT - select ARCH_MX35 select MXC_AVIC select SMP_ON_UP if SMP -- cgit v0.10.2 From adf792928d1c57f31b92b7908a5ba383e9f05373 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 22 Nov 2011 10:04:46 +0100 Subject: MAINTAINERS: Add missing directory arch/arm/mach-imx/ is part of the i.MX support. Add it. Signed-off-by: Sascha Hauer diff --git a/MAINTAINERS b/MAINTAINERS index 071a996..c9ae02a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -789,6 +789,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained T: git git://git.pengutronix.de/git/imx/linux-2.6.git F: arch/arm/mach-mx*/ +F: arch/arm/mach-imx/ F: arch/arm/plat-mxc/ ARM/FREESCALE IMX51 -- cgit v0.10.2 From ca06679d758933b726c2677b523a26bc581eadcf Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 21 Nov 2011 16:26:52 -0200 Subject: ARM: mx5: Fix checkpatch warnings in cpu-imx5.c Fix the following warnings reported by checkpatch: WARNING: Use #include instead of #19: FILE: arm/mach-imx/cpu-imx5.c:19: +#include WARNING: line over 80 characters #70: FILE: arm/mach-imx/cpu-imx5.c:70: + if (mx51_revision() < IMX_CHIP_REVISION_3_0 && (elf_hwcap & HWCAP_NEON)) { Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c index 5c53282..5e2e7a8 100644 --- a/arch/arm/mach-mx5/cpu.c +++ b/arch/arm/mach-mx5/cpu.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include static int mx5_cpu_rev = -1; @@ -67,7 +67,8 @@ static int __init mx51_neon_fixup(void) if (!cpu_is_mx51()) return 0; - if (mx51_revision() < IMX_CHIP_REVISION_3_0 && (elf_hwcap & HWCAP_NEON)) { + if (mx51_revision() < IMX_CHIP_REVISION_3_0 && + (elf_hwcap & HWCAP_NEON)) { elf_hwcap &= ~HWCAP_NEON; pr_info("Turning off NEON support, detected broken NEON implementation\n"); } -- cgit v0.10.2 From 87514fced7c347a7cdd8a7a346d935a168428ff7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 22 Nov 2011 10:07:26 +0100 Subject: ARM: imx/mm-imx3: conditionally compile i.MX31 and i.MX35 code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes building a kernel for only one of the two SOCs. Without this patch an i.MX31 only build fails with: arch/arm/mach-imx/built-in.o: In function `imx35_init_early': mach-bug.c:(.init.text+0x2c): undefined reference to `mxc_iomux_v3_init' arch/arm/mach-imx/built-in.o: In function `imx35_soc_init': mach-bug.c:(.init.text+0xe4): undefined reference to `mx35_revision' Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 9f0e82e..72613c4 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -108,6 +108,7 @@ void imx3_init_l2x0(void) l2x0_init(l2x0_base, 0x00030024, 0x00000000); } +#ifdef CONFIG_SOC_IMX31 static struct map_desc mx31_io_desc[] __initdata = { imx_map_entry(MX31, X_MEMC, MT_DEVICE), imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED), @@ -126,19 +127,6 @@ void __init mx31_map_io(void) iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc)); } -static struct map_desc mx35_io_desc[] __initdata = { - imx_map_entry(MX35, X_MEMC, MT_DEVICE), - imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED), - imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED), - imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED), - imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED), -}; - -void __init mx35_map_io(void) -{ - iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc)); -} - void __init imx31_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX31); @@ -147,25 +135,11 @@ void __init imx31_init_early(void) imx_ioremap = imx3_ioremap; } -void __init imx35_init_early(void) -{ - mxc_set_cpu_type(MXC_CPU_MX35); - mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); - mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); - imx_idle = imx3_idle; - imx_ioremap = imx3_ioremap; -} - void __init mx31_init_irq(void) { mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR)); } -void __init mx35_init_irq(void) -{ - mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR)); -} - static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = { .per_2_per_addr = 1677, }; @@ -199,6 +173,35 @@ void __init imx31_soc_init(void) imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata); } +#endif /* ifdef CONFIG_SOC_IMX31 */ + +#ifdef CONFIG_SOC_IMX35 +static struct map_desc mx35_io_desc[] __initdata = { + imx_map_entry(MX35, X_MEMC, MT_DEVICE), + imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED), + imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED), + imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED), + imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED), +}; + +void __init mx35_map_io(void) +{ + iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc)); +} + +void __init imx35_init_early(void) +{ + mxc_set_cpu_type(MXC_CPU_MX35); + mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); + mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); + imx_idle = imx3_idle; + imx_ioremap = imx3_ioremap; +} + +void __init mx35_init_irq(void) +{ + mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR)); +} static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = { .ap_2_ap_addr = 642, @@ -254,3 +257,4 @@ void __init imx35_soc_init(void) imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata); } +#endif /* ifdef CONFIG_SOC_IMX35 */ -- cgit v0.10.2 From 807dfe7041fb1ff2b076b999800553440e61234d Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 8 Oct 2011 17:16:49 +0200 Subject: ARM: imx: export imx_ioremap The arch_ioremap function on i.MX is now an indirect function pointer. In order to use it from any loadable module, the pointer itself has to be exported. ERROR: "imx_ioremap" [drivers/video/tmiofb.ko] undefined! ERROR: "imx_ioremap" [drivers/usb/host/sl811-hcd.ko] undefined! ERROR: "imx_ioremap" [drivers/usb/host/r8a66597-hcd.ko] undefined! ERROR: "imx_ioremap" [drivers/usb/host/oxu210hp-hcd.ko] undefined! ERROR: "imx_ioremap" [drivers/usb/gadget/r8a66597-udc.ko] undefined! Signed-off-by: Arnd Bergmann Acked-by: Shawn Guo Signed-off-by: Sascha Hauer diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c index 9dad8dc..45e1b5f 100644 --- a/arch/arm/plat-mxc/system.c +++ b/arch/arm/plat-mxc/system.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include @@ -30,6 +31,7 @@ void (*imx_idle)(void) = NULL; void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int) = NULL; +EXPORT_SYMBOL_GPL(imx_ioremap); static void __iomem *wdog_base; -- cgit v0.10.2 From c6e8453e7511001e453f8b20b9ceefd231946867 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Fri, 18 Nov 2011 16:59:32 -0600 Subject: ALSA: hda - repoll ELD content for multiple times Improve the one-shot ELD repoll to up to 6 retries. Up to now the 300ms looks sufficient for the test boxes. However I'm a bit worried about how well it can fit the wider user base. Signed-off-by: Wu Fengguang Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 9850c5b..c505fd5 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -69,6 +69,7 @@ struct hdmi_spec_per_pin { struct hda_codec *codec; struct hdmi_eld sink_eld; struct delayed_work work; + int repoll_count; }; struct hdmi_spec { @@ -748,7 +749,7 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec, int pin_idx, * Unsolicited events */ -static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, bool retry); +static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll); static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res) { @@ -766,7 +767,7 @@ static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res) if (pin_idx < 0) return; - hdmi_present_sense(&spec->pins[pin_idx], true); + hdmi_present_sense(&spec->pins[pin_idx], 1); } static void hdmi_non_intrinsic_event(struct hda_codec *codec, unsigned int res) @@ -960,7 +961,7 @@ static int hdmi_read_pin_conn(struct hda_codec *codec, int pin_idx) return 0; } -static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, bool retry) +static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll) { struct hda_codec *codec = per_pin->codec; struct hdmi_eld *eld = &per_pin->sink_eld; @@ -989,7 +990,7 @@ static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, bool retry) if (eld_valid) { if (!snd_hdmi_get_eld(eld, codec, pin_nid)) snd_hdmi_show_eld(eld); - else if (retry) { + else if (repoll) { queue_delayed_work(codec->bus->workq, &per_pin->work, msecs_to_jiffies(300)); @@ -1004,7 +1005,10 @@ static void hdmi_repoll_eld(struct work_struct *work) struct hdmi_spec_per_pin *per_pin = container_of(to_delayed_work(work), struct hdmi_spec_per_pin, work); - hdmi_present_sense(per_pin, false); + if (per_pin->repoll_count++ > 6) + per_pin->repoll_count = 0; + + hdmi_present_sense(per_pin, per_pin->repoll_count); } static int hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid) @@ -1235,7 +1239,7 @@ static int generic_hdmi_build_jack(struct hda_codec *codec, int pin_idx) if (err < 0) return err; - hdmi_present_sense(per_pin, false); + hdmi_present_sense(per_pin, 0); return 0; } -- cgit v0.10.2 From afd00d7235c1989d06d75cf8ac3d7722fcf2f394 Mon Sep 17 00:00:00 2001 From: Tim Blechmann Date: Tue, 22 Nov 2011 11:15:44 +0100 Subject: ALSA: lx6464es - command buffer API cleanup the command buffer is only accessed from one file, so we can declare the specific functions as static in that file Signed-off-by: Tim Blechmann Signed-off-by: Takashi Iwai diff --git a/sound/pci/lx6464es/lx_core.c b/sound/pci/lx6464es/lx_core.c index 5c8717e..ad52f41 100644 --- a/sound/pci/lx6464es/lx_core.c +++ b/sound/pci/lx6464es/lx_core.c @@ -78,7 +78,8 @@ unsigned long lx_dsp_reg_read(struct lx6464es *chip, int port) return ioread32(address); } -void lx_dsp_reg_readbuf(struct lx6464es *chip, int port, u32 *data, u32 len) +static void lx_dsp_reg_readbuf(struct lx6464es *chip, int port, u32 *data, + u32 len) { void __iomem *address = lx_dsp_register(chip, port); memcpy_fromio(data, address, len*sizeof(u32)); @@ -91,8 +92,8 @@ void lx_dsp_reg_write(struct lx6464es *chip, int port, unsigned data) iowrite32(data, address); } -void lx_dsp_reg_writebuf(struct lx6464es *chip, int port, const u32 *data, - u32 len) +static void lx_dsp_reg_writebuf(struct lx6464es *chip, int port, + const u32 *data, u32 len) { void __iomem *address = lx_dsp_register(chip, port); memcpy_toio(address, data, len*sizeof(u32)); diff --git a/sound/pci/lx6464es/lx_core.h b/sound/pci/lx6464es/lx_core.h index 1dd5629..4d7ff79 100644 --- a/sound/pci/lx6464es/lx_core.h +++ b/sound/pci/lx6464es/lx_core.h @@ -72,10 +72,7 @@ enum { }; unsigned long lx_dsp_reg_read(struct lx6464es *chip, int port); -void lx_dsp_reg_readbuf(struct lx6464es *chip, int port, u32 *data, u32 len); void lx_dsp_reg_write(struct lx6464es *chip, int port, unsigned data); -void lx_dsp_reg_writebuf(struct lx6464es *chip, int port, const u32 *data, - u32 len); /* plx register access */ enum { -- cgit v0.10.2 From a29878553a9a7b4c06f93c7e383527cf014d4ceb Mon Sep 17 00:00:00 2001 From: Tim Blechmann Date: Tue, 22 Nov 2011 11:15:45 +0100 Subject: ALSA: lx6464es - fix device communication via command bus commit 6175ddf06b6172046a329e3abfd9c901a43efd2e optimized the mem*io functions that have been used to send commands to the device. these optimizations somehow corrupted the communication with the lx6464es, that resulted the device to be unusable with kernels after 2.6.33. this patch emulates the memcpy_*_io functions via a loop to avoid these problems. Signed-off-by: Tim Blechmann LKML-Reference: <4ECB5257.4040600@ladisch.de> Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/lx6464es/lx_core.c b/sound/pci/lx6464es/lx_core.c index ad52f41..8c3e7fc 100644 --- a/sound/pci/lx6464es/lx_core.c +++ b/sound/pci/lx6464es/lx_core.c @@ -81,8 +81,12 @@ unsigned long lx_dsp_reg_read(struct lx6464es *chip, int port) static void lx_dsp_reg_readbuf(struct lx6464es *chip, int port, u32 *data, u32 len) { - void __iomem *address = lx_dsp_register(chip, port); - memcpy_fromio(data, address, len*sizeof(u32)); + u32 __iomem *address = lx_dsp_register(chip, port); + int i; + + /* we cannot use memcpy_fromio */ + for (i = 0; i != len; ++i) + data[i] = ioread32(address + i); } @@ -95,8 +99,12 @@ void lx_dsp_reg_write(struct lx6464es *chip, int port, unsigned data) static void lx_dsp_reg_writebuf(struct lx6464es *chip, int port, const u32 *data, u32 len) { - void __iomem *address = lx_dsp_register(chip, port); - memcpy_toio(address, data, len*sizeof(u32)); + u32 __iomem *address = lx_dsp_register(chip, port); + int i; + + /* we cannot use memcpy_to */ + for (i = 0; i != len; ++i) + iowrite32(data[i], address + i); } -- cgit v0.10.2 From a370fc62b9ad3f73abe2a721de6c03cdcce95b54 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Tue, 22 Nov 2011 16:46:23 +0800 Subject: ALSA: hda - fail ELD reading early With the ELD repoll mechanism, we can (and should) fail the ELD reading immediately when find something obviously wrong and let the caller retry after some delay. Signed-off-by: Wu Fengguang Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_eld.c b/sound/pci/hda/hda_eld.c index 7ae7578..c1da422 100644 --- a/sound/pci/hda/hda_eld.c +++ b/sound/pci/hda/hda_eld.c @@ -347,18 +347,28 @@ int snd_hdmi_get_eld(struct hdmi_eld *eld, for (i = 0; i < size; i++) { unsigned int val = hdmi_get_eld_data(codec, nid, i); + /* + * Graphics driver might be writing to ELD buffer right now. + * Just abort. The caller will repoll after a while. + */ if (!(val & AC_ELDD_ELD_VALID)) { - if (!i) { - snd_printd(KERN_INFO - "HDMI: invalid ELD data\n"); - ret = -EINVAL; - goto error; - } snd_printd(KERN_INFO "HDMI: invalid ELD data byte %d\n", i); - val = 0; - } else - val &= AC_ELDD_ELD_DATA; + ret = -EINVAL; + goto error; + } + val &= AC_ELDD_ELD_DATA; + /* + * The first byte cannot be zero. This can happen on some DVI + * connections. Some Intel chips may also need some 250ms delay + * to return non-zero ELD data, even when the graphics driver + * correctly writes ELD content before setting ELD_valid bit. + */ + if (!val && !i) { + snd_printdd(KERN_INFO "HDMI: 0 ELD data\n"); + ret = -EINVAL; + goto error; + } buf[i] = val; } -- cgit v0.10.2 From 90459ce06f410b983540be56209c0abcbce23944 Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Thu, 4 Aug 2011 11:02:33 +0200 Subject: percpu: rename pcpu_mem_alloc to pcpu_mem_zalloc Currently pcpu_mem_alloc() is implemented always return zeroed memory. So rename it to make user like pcpu_get_pages_and_bitmap() know don't reinit it. Signed-off-by: Bob Liu Reviewed-by: Pekka Enberg Reviewed-by: Michal Hocko Signed-off-by: Tejun Heo diff --git a/mm/percpu-vm.c b/mm/percpu-vm.c index ea53496..29e3730 100644 --- a/mm/percpu-vm.c +++ b/mm/percpu-vm.c @@ -50,14 +50,13 @@ static struct page **pcpu_get_pages_and_bitmap(struct pcpu_chunk *chunk, if (!pages || !bitmap) { if (may_alloc && !pages) - pages = pcpu_mem_alloc(pages_size); + pages = pcpu_mem_zalloc(pages_size); if (may_alloc && !bitmap) - bitmap = pcpu_mem_alloc(bitmap_size); + bitmap = pcpu_mem_zalloc(bitmap_size); if (!pages || !bitmap) return NULL; } - memset(pages, 0, pages_size); bitmap_copy(bitmap, chunk->populated, pcpu_unit_pages); *bitmapp = bitmap; diff --git a/mm/percpu.c b/mm/percpu.c index bf80e55..28c37a2 100644 --- a/mm/percpu.c +++ b/mm/percpu.c @@ -273,11 +273,11 @@ static void __maybe_unused pcpu_next_pop(struct pcpu_chunk *chunk, (rs) = (re) + 1, pcpu_next_pop((chunk), &(rs), &(re), (end))) /** - * pcpu_mem_alloc - allocate memory + * pcpu_mem_zalloc - allocate memory * @size: bytes to allocate * * Allocate @size bytes. If @size is smaller than PAGE_SIZE, - * kzalloc() is used; otherwise, vmalloc() is used. The returned + * kzalloc() is used; otherwise, vzalloc() is used. The returned * memory is always zeroed. * * CONTEXT: @@ -286,7 +286,7 @@ static void __maybe_unused pcpu_next_pop(struct pcpu_chunk *chunk, * RETURNS: * Pointer to the allocated area on success, NULL on failure. */ -static void *pcpu_mem_alloc(size_t size) +static void *pcpu_mem_zalloc(size_t size) { if (WARN_ON_ONCE(!slab_is_available())) return NULL; @@ -302,7 +302,7 @@ static void *pcpu_mem_alloc(size_t size) * @ptr: memory to free * @size: size of the area * - * Free @ptr. @ptr should have been allocated using pcpu_mem_alloc(). + * Free @ptr. @ptr should have been allocated using pcpu_mem_zalloc(). */ static void pcpu_mem_free(void *ptr, size_t size) { @@ -384,7 +384,7 @@ static int pcpu_extend_area_map(struct pcpu_chunk *chunk, int new_alloc) size_t old_size = 0, new_size = new_alloc * sizeof(new[0]); unsigned long flags; - new = pcpu_mem_alloc(new_size); + new = pcpu_mem_zalloc(new_size); if (!new) return -ENOMEM; @@ -604,11 +604,12 @@ static struct pcpu_chunk *pcpu_alloc_chunk(void) { struct pcpu_chunk *chunk; - chunk = pcpu_mem_alloc(pcpu_chunk_struct_size); + chunk = pcpu_mem_zalloc(pcpu_chunk_struct_size); if (!chunk) return NULL; - chunk->map = pcpu_mem_alloc(PCPU_DFL_MAP_ALLOC * sizeof(chunk->map[0])); + chunk->map = pcpu_mem_zalloc(PCPU_DFL_MAP_ALLOC * + sizeof(chunk->map[0])); if (!chunk->map) { kfree(chunk); return NULL; @@ -1889,7 +1890,7 @@ void __init percpu_init_late(void) BUILD_BUG_ON(size > PAGE_SIZE); - map = pcpu_mem_alloc(size); + map = pcpu_mem_zalloc(size); BUG_ON(!map); spin_lock_irqsave(&pcpu_lock, flags); -- cgit v0.10.2 From a855b84c3d8c73220d4d3cd392a7bee7c83de70e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 18 Nov 2011 10:55:35 -0800 Subject: percpu: fix chunk range calculation Percpu allocator recorded the cpus which map to the first and last units in pcpu_first/last_unit_cpu respectively and used them to determine the address range of a chunk - e.g. it assumed that the first unit has the lowest address in a chunk while the last unit has the highest address. This simply isn't true. Groups in a chunk can have arbitrary positive or negative offsets from the previous one and there is no guarantee that the first unit occupies the lowest offset while the last one the highest. Fix it by actually comparing unit offsets to determine cpus occupying the lowest and highest offsets. Also, rename pcu_first/last_unit_cpu to pcpu_low/high_unit_cpu to avoid confusion. The chunk address range is used to flush cache on vmalloc area map/unmap and decide whether a given address is in the first chunk by per_cpu_ptr_to_phys() and the bug was discovered by invalid per_cpu_ptr_to_phys() translation for crash_note. Kudos to Dave Young for tracking down the problem. Signed-off-by: Tejun Heo Reported-by: WANG Cong Reported-by: Dave Young Tested-by: Dave Young LKML-Reference: <4EC21F67.10905@redhat.com> Cc: stable @kernel.org diff --git a/mm/percpu-vm.c b/mm/percpu-vm.c index 29e3730..12a48a88 100644 --- a/mm/percpu-vm.c +++ b/mm/percpu-vm.c @@ -142,8 +142,8 @@ static void pcpu_pre_unmap_flush(struct pcpu_chunk *chunk, int page_start, int page_end) { flush_cache_vunmap( - pcpu_chunk_addr(chunk, pcpu_first_unit_cpu, page_start), - pcpu_chunk_addr(chunk, pcpu_last_unit_cpu, page_end)); + pcpu_chunk_addr(chunk, pcpu_low_unit_cpu, page_start), + pcpu_chunk_addr(chunk, pcpu_high_unit_cpu, page_end)); } static void __pcpu_unmap_pages(unsigned long addr, int nr_pages) @@ -205,8 +205,8 @@ static void pcpu_post_unmap_tlb_flush(struct pcpu_chunk *chunk, int page_start, int page_end) { flush_tlb_kernel_range( - pcpu_chunk_addr(chunk, pcpu_first_unit_cpu, page_start), - pcpu_chunk_addr(chunk, pcpu_last_unit_cpu, page_end)); + pcpu_chunk_addr(chunk, pcpu_low_unit_cpu, page_start), + pcpu_chunk_addr(chunk, pcpu_high_unit_cpu, page_end)); } static int __pcpu_map_pages(unsigned long addr, struct page **pages, @@ -283,8 +283,8 @@ static void pcpu_post_map_flush(struct pcpu_chunk *chunk, int page_start, int page_end) { flush_cache_vmap( - pcpu_chunk_addr(chunk, pcpu_first_unit_cpu, page_start), - pcpu_chunk_addr(chunk, pcpu_last_unit_cpu, page_end)); + pcpu_chunk_addr(chunk, pcpu_low_unit_cpu, page_start), + pcpu_chunk_addr(chunk, pcpu_high_unit_cpu, page_end)); } /** diff --git a/mm/percpu.c b/mm/percpu.c index 28c37a2..2473ff0 100644 --- a/mm/percpu.c +++ b/mm/percpu.c @@ -116,9 +116,9 @@ static int pcpu_atom_size __read_mostly; static int pcpu_nr_slots __read_mostly; static size_t pcpu_chunk_struct_size __read_mostly; -/* cpus with the lowest and highest unit numbers */ -static unsigned int pcpu_first_unit_cpu __read_mostly; -static unsigned int pcpu_last_unit_cpu __read_mostly; +/* cpus with the lowest and highest unit addresses */ +static unsigned int pcpu_low_unit_cpu __read_mostly; +static unsigned int pcpu_high_unit_cpu __read_mostly; /* the address of the first chunk which starts with the kernel static area */ void *pcpu_base_addr __read_mostly; @@ -985,19 +985,19 @@ phys_addr_t per_cpu_ptr_to_phys(void *addr) { void __percpu *base = __addr_to_pcpu_ptr(pcpu_base_addr); bool in_first_chunk = false; - unsigned long first_start, first_end; + unsigned long first_low, first_high; unsigned int cpu; /* - * The following test on first_start/end isn't strictly + * The following test on unit_low/high isn't strictly * necessary but will speed up lookups of addresses which * aren't in the first chunk. */ - first_start = pcpu_chunk_addr(pcpu_first_chunk, pcpu_first_unit_cpu, 0); - first_end = pcpu_chunk_addr(pcpu_first_chunk, pcpu_last_unit_cpu, - pcpu_unit_pages); - if ((unsigned long)addr >= first_start && - (unsigned long)addr < first_end) { + first_low = pcpu_chunk_addr(pcpu_first_chunk, pcpu_low_unit_cpu, 0); + first_high = pcpu_chunk_addr(pcpu_first_chunk, pcpu_high_unit_cpu, + pcpu_unit_pages); + if ((unsigned long)addr >= first_low && + (unsigned long)addr < first_high) { for_each_possible_cpu(cpu) { void *start = per_cpu_ptr(base, cpu); @@ -1234,7 +1234,9 @@ int __init pcpu_setup_first_chunk(const struct pcpu_alloc_info *ai, for (cpu = 0; cpu < nr_cpu_ids; cpu++) unit_map[cpu] = UINT_MAX; - pcpu_first_unit_cpu = NR_CPUS; + + pcpu_low_unit_cpu = NR_CPUS; + pcpu_high_unit_cpu = NR_CPUS; for (group = 0, unit = 0; group < ai->nr_groups; group++, unit += i) { const struct pcpu_group_info *gi = &ai->groups[group]; @@ -1254,9 +1256,13 @@ int __init pcpu_setup_first_chunk(const struct pcpu_alloc_info *ai, unit_map[cpu] = unit + i; unit_off[cpu] = gi->base_offset + i * ai->unit_size; - if (pcpu_first_unit_cpu == NR_CPUS) - pcpu_first_unit_cpu = cpu; - pcpu_last_unit_cpu = cpu; + /* determine low/high unit_cpu */ + if (pcpu_low_unit_cpu == NR_CPUS || + unit_off[cpu] < unit_off[pcpu_low_unit_cpu]) + pcpu_low_unit_cpu = cpu; + if (pcpu_high_unit_cpu == NR_CPUS || + unit_off[cpu] > unit_off[pcpu_high_unit_cpu]) + pcpu_high_unit_cpu = cpu; } } pcpu_nr_units = unit; -- cgit v0.10.2 From d31da0f0ba3bc0a827a63879310818c22d9a95be Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 22 Nov 2011 12:31:21 -0500 Subject: mount_subtree() pointless use-after-free d'oh... we'd carefully pinned mnt->mnt_sb down, dropped mnt and attempt to grab s_umount on mnt->mnt_sb. The trouble is, *mnt might've been overwritten by now... Signed-off-by: Al Viro diff --git a/fs/namespace.c b/fs/namespace.c index 50ee303..6d3a196 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -2493,6 +2493,7 @@ EXPORT_SYMBOL(create_mnt_ns); struct dentry *mount_subtree(struct vfsmount *mnt, const char *name) { struct mnt_namespace *ns; + struct super_block *s; struct path path; int err; @@ -2509,10 +2510,11 @@ struct dentry *mount_subtree(struct vfsmount *mnt, const char *name) return ERR_PTR(err); /* trade a vfsmount reference for active sb one */ - atomic_inc(&path.mnt->mnt_sb->s_active); + s = path.mnt->mnt_sb; + atomic_inc(&s->s_active); mntput(path.mnt); /* lock the sucker */ - down_write(&path.mnt->mnt_sb->s_umount); + down_write(&s->s_umount); /* ... and return the root of (sub)tree on it */ return path.dentry; } -- cgit v0.10.2 From e5a21327644adba32816f74a415114d11c57f2e9 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 22 Nov 2011 18:01:46 +0000 Subject: ARM: perf: check that we have a platform device when reserving PMU Attempting to use a hardware counter on a platform with a supported PMU but where the platform_device (defining the interrupts) has not been registered results in a NULL pointer dereference. This patch fixes the problem by checking that we actually have a platform device registered before attempting to grab the interrupts. Reported-by: Pawel Moll Signed-off-by: Will Deacon diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index e508066..c475379 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -402,6 +402,9 @@ armpmu_reserve_hardware(struct arm_pmu *armpmu) int i, err, irq, irqs; struct platform_device *pmu_device = armpmu->plat_device; + if (!pmu_device) + return -ENODEV; + err = reserve_pmu(armpmu->type); if (err) { pr_warning("unable to reserve pmu\n"); -- cgit v0.10.2 From 26cc40a83384178bfaefbcfb4786591498f3e190 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Mon, 21 Nov 2011 13:05:02 +0100 Subject: ttm: Don't return the bo reserved on error path An unlikely race could case a bo to be returned reserved on an error path. Signed-off-by: Thomas Hellstrom Reviewed-by: Jerome Glisse Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index 617b646..0bb0f5f 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -574,10 +574,16 @@ retry: return ret; spin_lock(&glob->lru_lock); + + if (unlikely(list_empty(&bo->ddestroy))) { + spin_unlock(&glob->lru_lock); + return 0; + } + ret = ttm_bo_reserve_locked(bo, interruptible, no_wait_reserve, false, 0); - if (unlikely(ret != 0) || list_empty(&bo->ddestroy)) { + if (unlikely(ret != 0)) { spin_unlock(&glob->lru_lock); return ret; } -- cgit v0.10.2 From d724502a9d7a46f4a56a1663b1f50d2dc9d1ef40 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 21 Nov 2011 12:10:14 -0500 Subject: drm/radeon/kms: fix up gpio i2c mask bits for r4xx for real Fixes i2c test failures when i2c_algo_bit.bit_test=1. The hw doesn't actually require a mask, so just set it to the default mask bits for r1xx-r4xx radeon ddc. I missed this part the first time through. Signed-off-by: Alex Deucher Cc: stable@kernel.org Cc: Jean Delvare Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index fecd705..933a2cd 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -181,6 +181,18 @@ void radeon_atombios_i2c_init(struct radeon_device *rdev) gpio = &i2c_info->asGPIO_Info[i]; i2c.valid = false; + /* r4xx mask is technically not used by the hw, so patch in the legacy mask bits */ + if ((rdev->family == CHIP_R420) || + (rdev->family == CHIP_R423) || + (rdev->family == CHIP_RV410)) { + if ((le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0018) || + (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0019) || + (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x001a)) { + gpio->ucClkMaskShift = 0x19; + gpio->ucDataMaskShift = 0x18; + } + } + /* some evergreen boards have bad data for this entry */ if (ASIC_IS_DCE4(rdev)) { if ((i == 7) && -- cgit v0.10.2 From 21240f9bc1b0ac925cd18b74618327a110022332 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 21 Nov 2011 12:41:21 -0500 Subject: drm/radeon/kms/atom: unify i2c gpio table handling Split the quirks and i2c_rec assignment into separate functions used by both radeon_lookup_i2c_gpio() and radeon_atombios_i2c_init(). This avoids duplicating code and cases where quirks were only added to one of the functions. Signed-off-by: Alex Deucher Cc: Jean Delvare Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 933a2cd..d24baf3 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -62,6 +62,87 @@ union atom_supported_devices { struct _ATOM_SUPPORTED_DEVICES_INFO_2d1 info_2d1; }; +static void radeon_lookup_i2c_gpio_quirks(struct radeon_device *rdev, + ATOM_GPIO_I2C_ASSIGMENT *gpio, + u8 index) +{ + /* r4xx mask is technically not used by the hw, so patch in the legacy mask bits */ + if ((rdev->family == CHIP_R420) || + (rdev->family == CHIP_R423) || + (rdev->family == CHIP_RV410)) { + if ((le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0018) || + (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0019) || + (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x001a)) { + gpio->ucClkMaskShift = 0x19; + gpio->ucDataMaskShift = 0x18; + } + } + + /* some evergreen boards have bad data for this entry */ + if (ASIC_IS_DCE4(rdev)) { + if ((index == 7) && + (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x1936) && + (gpio->sucI2cId.ucAccess == 0)) { + gpio->sucI2cId.ucAccess = 0x97; + gpio->ucDataMaskShift = 8; + gpio->ucDataEnShift = 8; + gpio->ucDataY_Shift = 8; + gpio->ucDataA_Shift = 8; + } + } + + /* some DCE3 boards have bad data for this entry */ + if (ASIC_IS_DCE3(rdev)) { + if ((index == 4) && + (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x1fda) && + (gpio->sucI2cId.ucAccess == 0x94)) + gpio->sucI2cId.ucAccess = 0x14; + } +} + +static struct radeon_i2c_bus_rec radeon_get_bus_rec_for_i2c_gpio(ATOM_GPIO_I2C_ASSIGMENT *gpio) +{ + struct radeon_i2c_bus_rec i2c; + + memset(&i2c, 0, sizeof(struct radeon_i2c_bus_rec)); + + i2c.mask_clk_reg = le16_to_cpu(gpio->usClkMaskRegisterIndex) * 4; + i2c.mask_data_reg = le16_to_cpu(gpio->usDataMaskRegisterIndex) * 4; + i2c.en_clk_reg = le16_to_cpu(gpio->usClkEnRegisterIndex) * 4; + i2c.en_data_reg = le16_to_cpu(gpio->usDataEnRegisterIndex) * 4; + i2c.y_clk_reg = le16_to_cpu(gpio->usClkY_RegisterIndex) * 4; + i2c.y_data_reg = le16_to_cpu(gpio->usDataY_RegisterIndex) * 4; + i2c.a_clk_reg = le16_to_cpu(gpio->usClkA_RegisterIndex) * 4; + i2c.a_data_reg = le16_to_cpu(gpio->usDataA_RegisterIndex) * 4; + i2c.mask_clk_mask = (1 << gpio->ucClkMaskShift); + i2c.mask_data_mask = (1 << gpio->ucDataMaskShift); + i2c.en_clk_mask = (1 << gpio->ucClkEnShift); + i2c.en_data_mask = (1 << gpio->ucDataEnShift); + i2c.y_clk_mask = (1 << gpio->ucClkY_Shift); + i2c.y_data_mask = (1 << gpio->ucDataY_Shift); + i2c.a_clk_mask = (1 << gpio->ucClkA_Shift); + i2c.a_data_mask = (1 << gpio->ucDataA_Shift); + + if (gpio->sucI2cId.sbfAccess.bfHW_Capable) + i2c.hw_capable = true; + else + i2c.hw_capable = false; + + if (gpio->sucI2cId.ucAccess == 0xa0) + i2c.mm_i2c = true; + else + i2c.mm_i2c = false; + + i2c.i2c_id = gpio->sucI2cId.ucAccess; + + if (i2c.mask_clk_reg) + i2c.valid = true; + else + i2c.valid = false; + + return i2c; +} + static struct radeon_i2c_bus_rec radeon_lookup_i2c_gpio(struct radeon_device *rdev, uint8_t id) { @@ -85,71 +166,10 @@ static struct radeon_i2c_bus_rec radeon_lookup_i2c_gpio(struct radeon_device *rd for (i = 0; i < num_indices; i++) { gpio = &i2c_info->asGPIO_Info[i]; - /* r4xx mask is technically not used by the hw, so patch in the legacy mask bits */ - if ((rdev->family == CHIP_R420) || - (rdev->family == CHIP_R423) || - (rdev->family == CHIP_RV410)) { - if ((le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0018) || - (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0019) || - (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x001a)) { - gpio->ucClkMaskShift = 0x19; - gpio->ucDataMaskShift = 0x18; - } - } - - /* some evergreen boards have bad data for this entry */ - if (ASIC_IS_DCE4(rdev)) { - if ((i == 7) && - (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x1936) && - (gpio->sucI2cId.ucAccess == 0)) { - gpio->sucI2cId.ucAccess = 0x97; - gpio->ucDataMaskShift = 8; - gpio->ucDataEnShift = 8; - gpio->ucDataY_Shift = 8; - gpio->ucDataA_Shift = 8; - } - } - - /* some DCE3 boards have bad data for this entry */ - if (ASIC_IS_DCE3(rdev)) { - if ((i == 4) && - (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x1fda) && - (gpio->sucI2cId.ucAccess == 0x94)) - gpio->sucI2cId.ucAccess = 0x14; - } + radeon_lookup_i2c_gpio_quirks(rdev, gpio, i); if (gpio->sucI2cId.ucAccess == id) { - i2c.mask_clk_reg = le16_to_cpu(gpio->usClkMaskRegisterIndex) * 4; - i2c.mask_data_reg = le16_to_cpu(gpio->usDataMaskRegisterIndex) * 4; - i2c.en_clk_reg = le16_to_cpu(gpio->usClkEnRegisterIndex) * 4; - i2c.en_data_reg = le16_to_cpu(gpio->usDataEnRegisterIndex) * 4; - i2c.y_clk_reg = le16_to_cpu(gpio->usClkY_RegisterIndex) * 4; - i2c.y_data_reg = le16_to_cpu(gpio->usDataY_RegisterIndex) * 4; - i2c.a_clk_reg = le16_to_cpu(gpio->usClkA_RegisterIndex) * 4; - i2c.a_data_reg = le16_to_cpu(gpio->usDataA_RegisterIndex) * 4; - i2c.mask_clk_mask = (1 << gpio->ucClkMaskShift); - i2c.mask_data_mask = (1 << gpio->ucDataMaskShift); - i2c.en_clk_mask = (1 << gpio->ucClkEnShift); - i2c.en_data_mask = (1 << gpio->ucDataEnShift); - i2c.y_clk_mask = (1 << gpio->ucClkY_Shift); - i2c.y_data_mask = (1 << gpio->ucDataY_Shift); - i2c.a_clk_mask = (1 << gpio->ucClkA_Shift); - i2c.a_data_mask = (1 << gpio->ucDataA_Shift); - - if (gpio->sucI2cId.sbfAccess.bfHW_Capable) - i2c.hw_capable = true; - else - i2c.hw_capable = false; - - if (gpio->sucI2cId.ucAccess == 0xa0) - i2c.mm_i2c = true; - else - i2c.mm_i2c = false; - - i2c.i2c_id = gpio->sucI2cId.ucAccess; - - if (i2c.mask_clk_reg) - i2c.valid = true; + i2c = radeon_get_bus_rec_for_i2c_gpio(gpio); break; } } @@ -169,8 +189,6 @@ void radeon_atombios_i2c_init(struct radeon_device *rdev) int i, num_indices; char stmp[32]; - memset(&i2c, 0, sizeof(struct radeon_i2c_bus_rec)); - if (atom_parse_data_header(ctx, index, &size, NULL, NULL, &data_offset)) { i2c_info = (struct _ATOM_GPIO_I2C_INFO *)(ctx->bios + data_offset); @@ -179,72 +197,12 @@ void radeon_atombios_i2c_init(struct radeon_device *rdev) for (i = 0; i < num_indices; i++) { gpio = &i2c_info->asGPIO_Info[i]; - i2c.valid = false; - - /* r4xx mask is technically not used by the hw, so patch in the legacy mask bits */ - if ((rdev->family == CHIP_R420) || - (rdev->family == CHIP_R423) || - (rdev->family == CHIP_RV410)) { - if ((le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0018) || - (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0019) || - (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x001a)) { - gpio->ucClkMaskShift = 0x19; - gpio->ucDataMaskShift = 0x18; - } - } - - /* some evergreen boards have bad data for this entry */ - if (ASIC_IS_DCE4(rdev)) { - if ((i == 7) && - (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x1936) && - (gpio->sucI2cId.ucAccess == 0)) { - gpio->sucI2cId.ucAccess = 0x97; - gpio->ucDataMaskShift = 8; - gpio->ucDataEnShift = 8; - gpio->ucDataY_Shift = 8; - gpio->ucDataA_Shift = 8; - } - } - - /* some DCE3 boards have bad data for this entry */ - if (ASIC_IS_DCE3(rdev)) { - if ((i == 4) && - (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x1fda) && - (gpio->sucI2cId.ucAccess == 0x94)) - gpio->sucI2cId.ucAccess = 0x14; - } - i2c.mask_clk_reg = le16_to_cpu(gpio->usClkMaskRegisterIndex) * 4; - i2c.mask_data_reg = le16_to_cpu(gpio->usDataMaskRegisterIndex) * 4; - i2c.en_clk_reg = le16_to_cpu(gpio->usClkEnRegisterIndex) * 4; - i2c.en_data_reg = le16_to_cpu(gpio->usDataEnRegisterIndex) * 4; - i2c.y_clk_reg = le16_to_cpu(gpio->usClkY_RegisterIndex) * 4; - i2c.y_data_reg = le16_to_cpu(gpio->usDataY_RegisterIndex) * 4; - i2c.a_clk_reg = le16_to_cpu(gpio->usClkA_RegisterIndex) * 4; - i2c.a_data_reg = le16_to_cpu(gpio->usDataA_RegisterIndex) * 4; - i2c.mask_clk_mask = (1 << gpio->ucClkMaskShift); - i2c.mask_data_mask = (1 << gpio->ucDataMaskShift); - i2c.en_clk_mask = (1 << gpio->ucClkEnShift); - i2c.en_data_mask = (1 << gpio->ucDataEnShift); - i2c.y_clk_mask = (1 << gpio->ucClkY_Shift); - i2c.y_data_mask = (1 << gpio->ucDataY_Shift); - i2c.a_clk_mask = (1 << gpio->ucClkA_Shift); - i2c.a_data_mask = (1 << gpio->ucDataA_Shift); - - if (gpio->sucI2cId.sbfAccess.bfHW_Capable) - i2c.hw_capable = true; - else - i2c.hw_capable = false; - - if (gpio->sucI2cId.ucAccess == 0xa0) - i2c.mm_i2c = true; - else - i2c.mm_i2c = false; + radeon_lookup_i2c_gpio_quirks(rdev, gpio, i); - i2c.i2c_id = gpio->sucI2cId.ucAccess; + i2c = radeon_get_bus_rec_for_i2c_gpio(gpio); - if (i2c.mask_clk_reg) { - i2c.valid = true; + if (i2c.valid) { sprintf(stmp, "0x%x", i2c.i2c_id); rdev->i2c_bus[i] = radeon_i2c_create(rdev->ddev, &i2c, stmp); } -- cgit v0.10.2 From c916874d60d9daf2e2d5f4f622b185ef57deb6a4 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 15 Nov 2011 14:53:11 -0800 Subject: drivers/gpu/vga/vgaarb.c: add missing kfree kbuf is a buffer that is local to this function, so all of the error paths leaving the function should release it. Signed-off-by: Julia Lawall Cc: Jesper Juhl Signed-off-by: Andrew Morton Signed-off-by: Dave Airlie diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c index bdde899..111d956 100644 --- a/drivers/gpu/vga/vgaarb.c +++ b/drivers/gpu/vga/vgaarb.c @@ -991,14 +991,20 @@ static ssize_t vga_arb_write(struct file *file, const char __user * buf, uc = &priv->cards[i]; } - if (!uc) - return -EINVAL; + if (!uc) { + ret_val = -EINVAL; + goto done; + } - if (io_state & VGA_RSRC_LEGACY_IO && uc->io_cnt == 0) - return -EINVAL; + if (io_state & VGA_RSRC_LEGACY_IO && uc->io_cnt == 0) { + ret_val = -EINVAL; + goto done; + } - if (io_state & VGA_RSRC_LEGACY_MEM && uc->mem_cnt == 0) - return -EINVAL; + if (io_state & VGA_RSRC_LEGACY_MEM && uc->mem_cnt == 0) { + ret_val = -EINVAL; + goto done; + } vga_put(pdev, io_state); -- cgit v0.10.2 From 24ca9a847791fd53d9b217330b15f3c285827a18 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 22 Nov 2011 14:44:28 +0200 Subject: SUNRPC: Ensure we return EAGAIN in xs_nospace if congestion is cleared By returning '0' instead of 'EAGAIN' when the tests in xs_nospace() fail to find evidence of socket congestion, we are making the RPC engine believe that the message was incorrectly sent and so it disconnects the socket instead of just retrying. The bug appears to have been introduced by commit 5e3771ce2d6a69e10fcc870cdf226d121d868491 (SUNRPC: Ensure that xs_nospace return values are propagated). Reported-by: Andrew Cooper Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org [>= 2.6.30] Tested-by: Andrew Cooper diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index 2d78d95..55472c4 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -496,7 +496,7 @@ static int xs_nospace(struct rpc_task *task) struct rpc_rqst *req = task->tk_rqstp; struct rpc_xprt *xprt = req->rq_xprt; struct sock_xprt *transport = container_of(xprt, struct sock_xprt, xprt); - int ret = 0; + int ret = -EAGAIN; dprintk("RPC: %5u xmit incomplete (%u left of %u)\n", task->tk_pid, req->rq_slen - req->rq_bytes_sent, @@ -508,7 +508,6 @@ static int xs_nospace(struct rpc_task *task) /* Don't race with disconnect */ if (xprt_connected(xprt)) { if (test_bit(SOCK_ASYNC_NOSPACE, &transport->sock->flags)) { - ret = -EAGAIN; /* * Notify TCP that we're limited by the application * window size -- cgit v0.10.2 From b4bbb02934e4511d9083f15c23e90703482e84ad Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 22 Nov 2011 15:09:20 -0800 Subject: Revert "of/irq: of_irq_find_parent: check for parent equal to child" This reverts commit dc9372808412edbc653a675a526c2ee6c0c14a91. As requested by Ben Herrenschmidt: "This breaks some powerpc platforms at least. The practice of having a node provide an explicit "interrupt-parent" property pointing to itself is an old trick that we've used in the past to allow a device-node to have interrupts routed to different controllers. In that case, the node also contains an interrupt-map, so the node is its own parent, the interrupt resolution hits the map, which then can route each individual interrupt to a different parent." Grant says: "Ah, nuts, yes that is broken then. Yes, please revert the commit and Rob & I will come up with a better solution. Rob, I think it can be done by explicitly checking for np == desc->interrupt_parent in of_irq_init() instead of relying on of_irq_find_parent() returning NULL." Requested-by: Benjamin Herrenschmidt Acked-by: Grant Likely Cc: Rob Herring Cc: devicetree-discuss@lists.ozlabs.org Cc: linuxppc-dev Cc: Tanmay Inamdar Signed-off-by: Linus Torvalds diff --git a/drivers/of/irq.c b/drivers/of/irq.c index 6d3dd39..791270b 100644 --- a/drivers/of/irq.c +++ b/drivers/of/irq.c @@ -60,27 +60,27 @@ EXPORT_SYMBOL_GPL(irq_of_parse_and_map); */ struct device_node *of_irq_find_parent(struct device_node *child) { - struct device_node *p, *c = child; + struct device_node *p; const __be32 *parp; - if (!of_node_get(c)) + if (!of_node_get(child)) return NULL; do { - parp = of_get_property(c, "interrupt-parent", NULL); + parp = of_get_property(child, "interrupt-parent", NULL); if (parp == NULL) - p = of_get_parent(c); + p = of_get_parent(child); else { if (of_irq_workarounds & OF_IMAP_NO_PHANDLE) p = of_node_get(of_irq_dflt_pic); else p = of_find_node_by_phandle(be32_to_cpup(parp)); } - of_node_put(c); - c = p; + of_node_put(child); + child = p; } while (p && of_get_property(p, "#interrupt-cells", NULL) == NULL); - return (p == child) ? NULL : p; + return p; } /** -- cgit v0.10.2 From e2301a4de22c438f5a962c7cefc3e9cba736991c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 22 Nov 2011 19:58:56 +0100 Subject: ALSA: hda - Check subdevice mask in snd_hda_check_board_codec_sid_config() In snd_hda_check_board_codec_sid_config(), not only comparing with the exact value but allow the bit-mask comparison for vendor-only, etc. Tested-by: Linus Torvalds Tested-by: Dirk Hohndel Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index e44b107..4562e9d 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -4046,9 +4046,9 @@ int snd_hda_check_board_codec_sid_config(struct hda_codec *codec, /* Search for codec ID */ for (q = tbl; q->subvendor; q++) { - unsigned long vendorid = (q->subdevice) | (q->subvendor << 16); - - if (vendorid == codec->subsystem_id) + unsigned int mask = 0xffff0000 | q->subdevice_mask; + unsigned int id = (q->subdevice | (q->subvendor << 16)) & mask; + if ((codec->subsystem_id & mask) == id) break; } -- cgit v0.10.2 From 6dfeb703e386369d9f1585d29482efe7b2b4401d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 22 Nov 2011 20:00:31 +0100 Subject: ALSA: hda - Fix invalid pin and GPIO for Apple laptops with CS codecs The PCI SSID 8086:7270 is commonly used for multiple Apple machines, thus we can't use it as identifier for a unique model. Because of this conflict, some machines show weird behavior. For example, MacBook Air shows Front and Surround speakers although only Surround works due to the wrongly overridden pin-configuration for imac27. This patch fixes two things: - Stop the wrong pin-config override of imac27 by removing PCI SSID entry for avoiding the wrong mappings, - Add the generic GPIO setup for Apple machines by checking the codec SSID vendor bits Tested-by: Linus Torvalds Tested-by: Dirk Hohndel Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c index 2fbab8e..7bd2a52 100644 --- a/sound/pci/hda/patch_cirrus.c +++ b/sound/pci/hda/patch_cirrus.c @@ -58,6 +58,8 @@ struct cs_spec { unsigned int gpio_mask; unsigned int gpio_dir; unsigned int gpio_data; + unsigned int gpio_eapd_hp; /* EAPD GPIO bit for headphones */ + unsigned int gpio_eapd_speaker; /* EAPD GPIO bit for speakers */ struct hda_pcm pcm_rec[2]; /* PCM information */ @@ -76,6 +78,7 @@ enum { CS420X_MBP53, CS420X_MBP55, CS420X_IMAC27, + CS420X_APPLE, CS420X_AUTO, CS420X_MODELS }; @@ -928,10 +931,9 @@ static void cs_automute(struct hda_codec *codec) spdif_present ? 0 : PIN_OUT); } } - if (spec->board_config == CS420X_MBP53 || - spec->board_config == CS420X_MBP55 || - spec->board_config == CS420X_IMAC27) { - unsigned int gpio = hp_present ? 0x02 : 0x08; + if (spec->gpio_eapd_hp) { + unsigned int gpio = hp_present ? + spec->gpio_eapd_hp : spec->gpio_eapd_speaker; snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA, gpio); } @@ -1276,6 +1278,7 @@ static const char * const cs420x_models[CS420X_MODELS] = { [CS420X_MBP53] = "mbp53", [CS420X_MBP55] = "mbp55", [CS420X_IMAC27] = "imac27", + [CS420X_IMAC27] = "apple", [CS420X_AUTO] = "auto", }; @@ -1285,7 +1288,13 @@ static const struct snd_pci_quirk cs420x_cfg_tbl[] = { SND_PCI_QUIRK(0x10de, 0x0d94, "MacBookAir 3,1(2)", CS420X_MBP55), SND_PCI_QUIRK(0x10de, 0xcb79, "MacBookPro 5,5", CS420X_MBP55), SND_PCI_QUIRK(0x10de, 0xcb89, "MacBookPro 7,1", CS420X_MBP55), - SND_PCI_QUIRK(0x8086, 0x7270, "IMac 27 Inch", CS420X_IMAC27), + /* this conflicts with too many other models */ + /*SND_PCI_QUIRK(0x8086, 0x7270, "IMac 27 Inch", CS420X_IMAC27),*/ + {} /* terminator */ +}; + +static const struct snd_pci_quirk cs420x_codec_cfg_tbl[] = { + SND_PCI_QUIRK_VENDOR(0x106b, "Apple", CS420X_APPLE), {} /* terminator */ }; @@ -1367,6 +1376,10 @@ static int patch_cs420x(struct hda_codec *codec) spec->board_config = snd_hda_check_board_config(codec, CS420X_MODELS, cs420x_models, cs420x_cfg_tbl); + if (spec->board_config < 0) + spec->board_config = + snd_hda_check_board_codec_sid_config(codec, + CS420X_MODELS, NULL, cs420x_codec_cfg_tbl); if (spec->board_config >= 0) fix_pincfg(codec, spec->board_config, cs_pincfgs); @@ -1374,10 +1387,11 @@ static int patch_cs420x(struct hda_codec *codec) case CS420X_IMAC27: case CS420X_MBP53: case CS420X_MBP55: - /* GPIO1 = headphones */ - /* GPIO3 = speakers */ - spec->gpio_mask = 0x0a; - spec->gpio_dir = 0x0a; + case CS420X_APPLE: + spec->gpio_eapd_hp = 2; /* GPIO1 = headphones */ + spec->gpio_eapd_speaker = 8; /* GPIO3 = speakers */ + spec->gpio_mask = spec->gpio_dir = + spec->gpio_eapd_hp | spec->gpio_eapd_speaker; break; } -- cgit v0.10.2 From 6759dc323826c2c806c998cd93945c5476688dd2 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 23 Nov 2011 07:38:59 +0100 Subject: ALSA: hda/realtek - Fix missing inits of item indices for auto-mic When the imux entries are rebuilt in alc_rebuild_imux_for_auto_mic(), the initialization of index field is missing. It may work without it casually when the original imux was created by the auto-parser, but it's definitely broken in the case of static configs where no imux was parsed beforehand. Because of this, the auto-mic switching doesn't work properly on some model options. This patch adds the missing initialization of index field. Reported-by: Dmitry Nezhevenko Cc: [v3.1] Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 336d14e..06c0c12 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -1054,8 +1054,20 @@ static bool alc_rebuild_imux_for_auto_mic(struct hda_codec *codec) spec->imux_pins[2] = spec->dock_mic_pin; for (i = 0; i < 3; i++) { strcpy(imux->items[i].label, texts[i]); - if (spec->imux_pins[i]) + if (spec->imux_pins[i]) { + hda_nid_t pin = spec->imux_pins[i]; + int c; + for (c = 0; c < spec->num_adc_nids; c++) { + hda_nid_t cap = spec->capsrc_nids ? + spec->capsrc_nids[c] : spec->adc_nids[c]; + int idx = get_connection_index(codec, cap, pin); + if (idx >= 0) { + imux->items[i].index = idx; + break; + } + } imux->num_items = i + 1; + } } spec->num_mux_defs = 1; spec->input_mux = imux; -- cgit v0.10.2 From 61071594f64ed12328046f94716d1d744bddc0a1 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 23 Nov 2011 07:52:15 +0100 Subject: ALSA: hda/realtek - Minor cleanup Use an inline function for the common pattern for assigning a capsrc. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 06c0c12..cbde019 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -277,6 +277,12 @@ static bool alc_dyn_adc_pcm_resetup(struct hda_codec *codec, int cur) return false; } +static inline hda_nid_t get_capsrc(struct alc_spec *spec, int idx) +{ + return spec->capsrc_nids ? + spec->capsrc_nids[idx] : spec->adc_nids[idx]; +} + /* select the given imux item; either unmute exclusively or select the route */ static int alc_mux_select(struct hda_codec *codec, unsigned int adc_idx, unsigned int idx, bool force) @@ -303,8 +309,7 @@ static int alc_mux_select(struct hda_codec *codec, unsigned int adc_idx, adc_idx = spec->dyn_adc_idx[idx]; } - nid = spec->capsrc_nids ? - spec->capsrc_nids[adc_idx] : spec->adc_nids[adc_idx]; + nid = get_capsrc(spec, adc_idx); /* no selection? */ num_conns = snd_hda_get_conn_list(codec, nid, NULL); @@ -1058,8 +1063,7 @@ static bool alc_rebuild_imux_for_auto_mic(struct hda_codec *codec) hda_nid_t pin = spec->imux_pins[i]; int c; for (c = 0; c < spec->num_adc_nids; c++) { - hda_nid_t cap = spec->capsrc_nids ? - spec->capsrc_nids[c] : spec->adc_nids[c]; + hda_nid_t cap = get_capsrc(spec, c); int idx = get_connection_index(codec, cap, pin); if (idx >= 0) { imux->items[i].index = idx; @@ -1969,10 +1973,8 @@ static int alc_build_controls(struct hda_codec *codec) if (!kctl) kctl = snd_hda_find_mixer_ctl(codec, "Input Source"); for (i = 0; kctl && i < kctl->count; i++) { - const hda_nid_t *nids = spec->capsrc_nids; - if (!nids) - nids = spec->adc_nids; - err = snd_hda_add_nid(codec, kctl, i, nids[i]); + err = snd_hda_add_nid(codec, kctl, i, + get_capsrc(spec, i)); if (err < 0) return err; } @@ -2759,8 +2761,7 @@ static int alc_auto_create_input_ctls(struct hda_codec *codec) } for (c = 0; c < num_adcs; c++) { - hda_nid_t cap = spec->capsrc_nids ? - spec->capsrc_nids[c] : spec->adc_nids[c]; + hda_nid_t cap = get_capsrc(spec, c); idx = get_connection_index(codec, cap, pin); if (idx >= 0) { spec->imux_pins[imux->num_items] = pin; @@ -3706,8 +3707,7 @@ static int init_capsrc_for_pin(struct hda_codec *codec, hda_nid_t pin) if (!pin) return 0; for (i = 0; i < spec->num_adc_nids; i++) { - hda_nid_t cap = spec->capsrc_nids ? - spec->capsrc_nids[i] : spec->adc_nids[i]; + hda_nid_t cap = get_capsrc(spec, i); int idx; idx = get_connection_index(codec, cap, pin); -- cgit v0.10.2 From a5cd335165e31db9dbab636fd29895d41da55dd2 Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Wed, 23 Nov 2011 01:12:01 -0500 Subject: drm: integer overflow in drm_mode_dirtyfb_ioctl() There is a potential integer overflow in drm_mode_dirtyfb_ioctl() if userspace passes in a large num_clips. The call to kmalloc would allocate a small buffer, and the call to fb->funcs->dirty may result in a memory corruption. Reported-by: Haogang Chen Signed-off-by: Xi Wang Cc: stable@kernel.org Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 405c63b..8323fc3 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -1873,6 +1873,10 @@ int drm_mode_dirtyfb_ioctl(struct drm_device *dev, } if (num_clips && clips_ptr) { + if (num_clips < 0 || num_clips > DRM_MODE_FB_DIRTY_MAX_CLIPS) { + ret = -EINVAL; + goto out_err1; + } clips = kzalloc(num_clips * sizeof(*clips), GFP_KERNEL); if (!clips) { ret = -ENOMEM; diff --git a/include/drm/drm_mode.h b/include/drm/drm_mode.h index d30bedf..ddd46db 100644 --- a/include/drm/drm_mode.h +++ b/include/drm/drm_mode.h @@ -235,6 +235,8 @@ struct drm_mode_fb_cmd { #define DRM_MODE_FB_DIRTY_ANNOTATE_FILL 0x02 #define DRM_MODE_FB_DIRTY_FLAGS 0x03 +#define DRM_MODE_FB_DIRTY_MAX_CLIPS 256 + /* * Mark a region of a framebuffer as dirty. * -- cgit v0.10.2 From cc6bcf7d2ec2234e7b41770185e4dc826390185e Mon Sep 17 00:00:00 2001 From: "Jeffrey (Sheng-Hui) Chu" Date: Wed, 23 Nov 2011 11:33:07 +0100 Subject: i2c-algo-bit: Generate correct i2c address sequence for 10-bit target The wrong bits were put on the wire, fix that. This fixes kernel bug #42562. Signed-off-by: Sheng-Hui J. Chu Cc: stable@kernel.org Signed-off-by: Jean Delvare diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index 85584a5..525c734 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -488,7 +488,7 @@ static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) if (flags & I2C_M_TEN) { /* a ten bit address */ - addr = 0xf0 | ((msg->addr >> 7) & 0x03); + addr = 0xf0 | ((msg->addr >> 7) & 0x06); bit_dbg(2, &i2c_adap->dev, "addr0: %d\n", addr); /* try extended address code...*/ ret = try_address(i2c_adap, addr, retries); @@ -498,7 +498,7 @@ static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) return -ENXIO; } /* the remaining 8 bit address */ - ret = i2c_outb(i2c_adap, msg->addr & 0x7f); + ret = i2c_outb(i2c_adap, msg->addr & 0xff); if ((ret != 1) && !nak_ok) { /* the chip did not ack / xmission error occurred */ dev_err(&i2c_adap->dev, "died at 2nd address code\n"); -- cgit v0.10.2 From cbb44514048a250647c6c6b3df27ff62cb71f7d5 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 23 Nov 2011 11:33:07 +0100 Subject: i2c: Fix device name for 10-bit slave address 10-bit addresses overlap with traditional 7-bit addresses, leading in device name collisions. Add an arbitrary offset to 10-bit addresses to prevent this collision. The offset was chosen so that the address is still easily recognizable. Signed-off-by: Jean Delvare Acked-by: Wolfram Sang diff --git a/Documentation/i2c/ten-bit-addresses b/Documentation/i2c/ten-bit-addresses index e989070..cdfe139 100644 --- a/Documentation/i2c/ten-bit-addresses +++ b/Documentation/i2c/ten-bit-addresses @@ -1,22 +1,24 @@ The I2C protocol knows about two kinds of device addresses: normal 7 bit addresses, and an extended set of 10 bit addresses. The sets of addresses do not intersect: the 7 bit address 0x10 is not the same as the 10 bit -address 0x10 (though a single device could respond to both of them). You -select a 10 bit address by adding an extra byte after the address -byte: - S Addr7 Rd/Wr .... -becomes - S 11110 Addr10 Rd/Wr -S is the start bit, Rd/Wr the read/write bit, and if you count the number -of bits, you will see the there are 8 after the S bit for 7 bit addresses, -and 16 after the S bit for 10 bit addresses. +address 0x10 (though a single device could respond to both of them). -WARNING! The current 10 bit address support is EXPERIMENTAL. There are -several places in the code that will cause SEVERE PROBLEMS with 10 bit -addresses, even though there is some basic handling and hooks. Also, -almost no supported adapter handles the 10 bit addresses correctly. +I2C messages to and from 10-bit address devices have a different format. +See the I2C specification for the details. -As soon as a real 10 bit address device is spotted 'in the wild', we -can and will add proper support. Right now, 10 bit address devices -are defined by the I2C protocol, but we have never seen a single device -which supports them. +The current 10 bit address support is minimal. It should work, however +you can expect some problems along the way: +* Not all bus drivers support 10-bit addresses. Some don't because the + hardware doesn't support them (SMBus doesn't require 10-bit address + support for example), some don't because nobody bothered adding the + code (or it's there but not working properly.) Software implementation + (i2c-algo-bit) is known to work. +* Some optional features do not support 10-bit addresses. This is the + case of automatic detection and instantiation of devices by their, + drivers, for example. +* Many user-space packages (for example i2c-tools) lack support for + 10-bit addresses. + +Note that 10-bit address devices are still pretty rare, so the limitations +listed above could stay for a long time, maybe even forever if nobody +needs them to be fixed. diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 131079a..1e56061 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -539,8 +539,10 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info) client->dev.type = &i2c_client_type; client->dev.of_node = info->of_node; + /* For 10-bit clients, add an arbitrary offset to avoid collisions */ dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adap), - client->addr); + client->addr | ((client->flags & I2C_CLIENT_TEN) + ? 0xa000 : 0)); status = device_register(&client->dev); if (status) goto out_err; -- cgit v0.10.2 From 67820021dc9c8da37f773025190280f55f3626d4 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 23 Nov 2011 11:33:07 +0100 Subject: i2c: Delete ANY_I2C_BUS Last piece of code using ANY_I2C_BUS was deleted almost 2 years ago, so ANY_I2C_BUS can go away as well. Signed-off-by: Jean Delvare diff --git a/include/linux/i2c.h b/include/linux/i2c.h index a81bf6d..07d103a 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -432,9 +432,6 @@ void i2c_unlock_adapter(struct i2c_adapter *); /* Internal numbers to terminate lists */ #define I2C_CLIENT_END 0xfffeU -/* The numbers to use to set I2C bus address */ -#define ANY_I2C_BUS 0xffff - /* Construct an I2C_CLIENT_END-terminated array of i2c addresses */ #define I2C_ADDRS(addr, addrs...) \ ((const unsigned short []){ addr, ## addrs, I2C_CLIENT_END }) -- cgit v0.10.2 From eff245c82f115059648cdce95dd68bb940f2b006 Mon Sep 17 00:00:00 2001 From: Shubhrajyoti D Date: Wed, 23 Nov 2011 11:33:07 +0100 Subject: i2c: Make i2cdev_notifier_call static The function i2cdev_notifier_call is used only in i2c-dev file making it static. Also removes the following sparse warning drivers/i2c/i2c-dev.c:582:5: warning: symbol 'i2cdev_notifier_call' was not declared. Should it be static? Signed-off-by: Shubhrajyoti D Signed-off-by: Jean Delvare diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index c90ce50..57a45ce8 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -579,7 +579,7 @@ static int i2cdev_detach_adapter(struct device *dev, void *dummy) return 0; } -int i2cdev_notifier_call(struct notifier_block *nb, unsigned long action, +static int i2cdev_notifier_call(struct notifier_block *nb, unsigned long action, void *data) { struct device *dev = data; -- cgit v0.10.2 From 780dc9ba4eb682a89be48d5b814feae6722a19e0 Mon Sep 17 00:00:00 2001 From: Afzal Mohammed Date: Tue, 8 Nov 2011 18:54:10 +0530 Subject: regulator: TPS65910: Fix VDD1/2 voltage selector count Count of selector voltage is required for regulator_set_voltage to work via set_voltage_sel. VDD1/2 currently have it as zero, so regulator_set_voltage won't work for VDD1/2. Update count (n_voltages) for VDD1/2. Output Voltage = (step value * 12.5 mV + 562.5 mV) * gain With above expr, number of voltages that can be selected is step value count * gain count constant for gain count will be called VDD1_2_NUM_VOLT_COARSE existing constant for step value count is VDD1_2_NUM_VOLTS, use VDD1_2_NUM_VOLT_FINE instead to make clear that step value is not the only component in deciding selectable voltage count Signed-off-by: Afzal Mohammed Signed-off-by: Mark Brown diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c index 66d2d60..b552aae 100644 --- a/drivers/regulator/tps65910-regulator.c +++ b/drivers/regulator/tps65910-regulator.c @@ -664,10 +664,10 @@ static int tps65910_set_voltage_dcdc(struct regulator_dev *dev, switch (id) { case TPS65910_REG_VDD1: - dcdc_mult = (selector / VDD1_2_NUM_VOLTS) + 1; + dcdc_mult = (selector / VDD1_2_NUM_VOLT_FINE) + 1; if (dcdc_mult == 1) dcdc_mult--; - vsel = (selector % VDD1_2_NUM_VOLTS) + 3; + vsel = (selector % VDD1_2_NUM_VOLT_FINE) + 3; tps65910_modify_bits(pmic, TPS65910_VDD1, (dcdc_mult << VDD1_VGAIN_SEL_SHIFT), @@ -675,10 +675,10 @@ static int tps65910_set_voltage_dcdc(struct regulator_dev *dev, tps65910_reg_write(pmic, TPS65910_VDD1_OP, vsel); break; case TPS65910_REG_VDD2: - dcdc_mult = (selector / VDD1_2_NUM_VOLTS) + 1; + dcdc_mult = (selector / VDD1_2_NUM_VOLT_FINE) + 1; if (dcdc_mult == 1) dcdc_mult--; - vsel = (selector % VDD1_2_NUM_VOLTS) + 3; + vsel = (selector % VDD1_2_NUM_VOLT_FINE) + 3; tps65910_modify_bits(pmic, TPS65910_VDD2, (dcdc_mult << VDD2_VGAIN_SEL_SHIFT), @@ -756,9 +756,9 @@ static int tps65910_list_voltage_dcdc(struct regulator_dev *dev, switch (id) { case TPS65910_REG_VDD1: case TPS65910_REG_VDD2: - mult = (selector / VDD1_2_NUM_VOLTS) + 1; + mult = (selector / VDD1_2_NUM_VOLT_FINE) + 1; volt = VDD1_2_MIN_VOLT + - (selector % VDD1_2_NUM_VOLTS) * VDD1_2_OFFSET; + (selector % VDD1_2_NUM_VOLT_FINE) * VDD1_2_OFFSET; break; case TPS65911_REG_VDDCTRL: volt = VDDCTRL_MIN_VOLT + (selector * VDDCTRL_OFFSET); @@ -947,6 +947,8 @@ static __devinit int tps65910_probe(struct platform_device *pdev) if (i == TPS65910_REG_VDD1 || i == TPS65910_REG_VDD2) { pmic->desc[i].ops = &tps65910_ops_dcdc; + pmic->desc[i].n_voltages = VDD1_2_NUM_VOLT_FINE * + VDD1_2_NUM_VOLT_COARSE; } else if (i == TPS65910_REG_VDD3) { if (tps65910_chip_id(tps65910) == TPS65910) pmic->desc[i].ops = &tps65910_ops_vdd3; diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index 82b4c88..8bf2cb9 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -243,7 +243,8 @@ /*Registers VDD1, VDD2 voltage values definitions */ -#define VDD1_2_NUM_VOLTS 73 +#define VDD1_2_NUM_VOLT_FINE 73 +#define VDD1_2_NUM_VOLT_COARSE 3 #define VDD1_2_MIN_VOLT 6000 #define VDD1_2_OFFSET 125 -- cgit v0.10.2 From 67589c71456b0346500629967292dea3802230b6 Mon Sep 17 00:00:00 2001 From: Dave Young Date: Wed, 23 Nov 2011 08:20:53 -0800 Subject: percpu: explain why per_cpu_ptr_to_phys() is more complicated than necessary Add comments about current per_cpu_ptr_to_phys implementation to explain why the logic is more complicated than necessary. -tj: relocated comment into kerneldoc comment Signed-off-by: Dave Young Signed-off-by: Tejun Heo diff --git a/mm/percpu.c b/mm/percpu.c index 2473ff0..3bb810a 100644 --- a/mm/percpu.c +++ b/mm/percpu.c @@ -978,6 +978,17 @@ bool is_kernel_percpu_address(unsigned long addr) * address. The caller is responsible for ensuring @addr stays valid * until this function finishes. * + * percpu allocator has special setup for the first chunk, which currently + * supports either embedding in linear address space or vmalloc mapping, + * and, from the second one, the backing allocator (currently either vm or + * km) provides translation. + * + * The addr can be tranlated simply without checking if it falls into the + * first chunk. But the current code reflects better how percpu allocator + * actually works, and the verification can discover both bugs in percpu + * allocator itself and per_cpu_ptr_to_phys() callers. So we keep current + * code. + * * RETURNS: * The physical address for @addr. */ -- cgit v0.10.2 From c2735391fbc68feae10d6d14e60956c8106e725f Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sat, 10 Sep 2011 12:26:07 +0200 Subject: arm: mx28: fix bit operation in clock setting reg | (1 << clk->enable_shift) always evaluates to true. Switch it to & which makes much more sense. Same fix as 13be9f00 (ARM i.MX28: fix bit operation) at a different location. Signed-off-by: Wolfram Sang Cc: Sascha Hauer Cc: Shawn Guo Signed-off-by: Shawn Guo Cc: stable@kernel.org Signed-off-by: Arnd Bergmann diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 229ae34..da6e4aa 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -404,7 +404,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ reg &= ~BM_CLKCTRL_##dr##_DIV; \ reg |= div << BP_CLKCTRL_##dr##_DIV; \ - if (reg | (1 << clk->enable_shift)) { \ + if (reg & (1 << clk->enable_shift)) { \ pr_err("%s: clock is gated\n", __func__); \ return -EINVAL; \ } \ -- cgit v0.10.2 From bb58dd5d1ffad6c2d21c69698ba766dad4ae54e6 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 22 Nov 2011 23:08:10 +0100 Subject: PM / Hibernate: Do not leak memory in error/test code paths The hibernation core code forgets to release memory preallocated for hibernation if there's an error in its early stages or if test modes causing hibernation_snapshot() to return early are used. This causes the system to be hardly usable, because the amount of preallocated memory is usually huge. Fix this problem. Reported-by: Srivatsa S. Bhat Signed-off-by: Rafael J. Wysocki Acked-by: Srivatsa S. Bhat diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c index 196c0126..a6b0503 100644 --- a/kernel/power/hibernate.c +++ b/kernel/power/hibernate.c @@ -347,7 +347,7 @@ int hibernation_snapshot(int platform_mode) error = freeze_kernel_threads(); if (error) - goto Close; + goto Cleanup; if (hibernation_test(TEST_FREEZER) || hibernation_testmode(HIBERNATION_TESTPROC)) { @@ -357,12 +357,14 @@ int hibernation_snapshot(int platform_mode) * successful freezer test. */ freezer_test_done = true; - goto Close; + goto Cleanup; } error = dpm_prepare(PMSG_FREEZE); - if (error) - goto Complete_devices; + if (error) { + dpm_complete(msg); + goto Cleanup; + } suspend_console(); pm_restrict_gfp_mask(); @@ -391,8 +393,6 @@ int hibernation_snapshot(int platform_mode) pm_restore_gfp_mask(); resume_console(); - - Complete_devices: dpm_complete(msg); Close: @@ -402,6 +402,10 @@ int hibernation_snapshot(int platform_mode) Recover_platform: platform_recover(platform_mode); goto Resume_devices; + + Cleanup: + swsusp_free(); + goto Close; } /** -- cgit v0.10.2 From b59db43ad4434519feb338eacb01d77eb50825c5 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Mon, 21 Nov 2011 17:31:02 -0600 Subject: eCryptfs: Prevent file create race condition The file creation path prematurely called d_instantiate() and unlock_new_inode() before the eCryptfs inode info was fully allocated and initialized and before the eCryptfs metadata was written to the lower file. This could result in race conditions in subsequent file and inode operations leading to unexpected error conditions or a null pointer dereference while attempting to use the unallocated memory. https://launchpad.net/bugs/813146 Signed-off-by: Tyler Hicks Cc: stable@kernel.org diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c index 58609bd..203a1fd 100644 --- a/fs/ecryptfs/crypto.c +++ b/fs/ecryptfs/crypto.c @@ -967,7 +967,7 @@ static void ecryptfs_set_default_crypt_stat_vals( /** * ecryptfs_new_file_context - * @ecryptfs_dentry: The eCryptfs dentry + * @ecryptfs_inode: The eCryptfs inode * * If the crypto context for the file has not yet been established, * this is where we do that. Establishing a new crypto context @@ -984,13 +984,13 @@ static void ecryptfs_set_default_crypt_stat_vals( * * Returns zero on success; non-zero otherwise */ -int ecryptfs_new_file_context(struct dentry *ecryptfs_dentry) +int ecryptfs_new_file_context(struct inode *ecryptfs_inode) { struct ecryptfs_crypt_stat *crypt_stat = - &ecryptfs_inode_to_private(ecryptfs_dentry->d_inode)->crypt_stat; + &ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat; struct ecryptfs_mount_crypt_stat *mount_crypt_stat = &ecryptfs_superblock_to_private( - ecryptfs_dentry->d_sb)->mount_crypt_stat; + ecryptfs_inode->i_sb)->mount_crypt_stat; int cipher_name_len; int rc = 0; @@ -1299,12 +1299,12 @@ static int ecryptfs_write_headers_virt(char *page_virt, size_t max, } static int -ecryptfs_write_metadata_to_contents(struct dentry *ecryptfs_dentry, +ecryptfs_write_metadata_to_contents(struct inode *ecryptfs_inode, char *virt, size_t virt_len) { int rc; - rc = ecryptfs_write_lower(ecryptfs_dentry->d_inode, virt, + rc = ecryptfs_write_lower(ecryptfs_inode, virt, 0, virt_len); if (rc < 0) printk(KERN_ERR "%s: Error attempting to write header " @@ -1338,7 +1338,8 @@ static unsigned long ecryptfs_get_zeroed_pages(gfp_t gfp_mask, /** * ecryptfs_write_metadata - * @ecryptfs_dentry: The eCryptfs dentry + * @ecryptfs_dentry: The eCryptfs dentry, which should be negative + * @ecryptfs_inode: The newly created eCryptfs inode * * Write the file headers out. This will likely involve a userspace * callout, in which the session key is encrypted with one or more @@ -1348,10 +1349,11 @@ static unsigned long ecryptfs_get_zeroed_pages(gfp_t gfp_mask, * * Returns zero on success; non-zero on error */ -int ecryptfs_write_metadata(struct dentry *ecryptfs_dentry) +int ecryptfs_write_metadata(struct dentry *ecryptfs_dentry, + struct inode *ecryptfs_inode) { struct ecryptfs_crypt_stat *crypt_stat = - &ecryptfs_inode_to_private(ecryptfs_dentry->d_inode)->crypt_stat; + &ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat; unsigned int order; char *virt; size_t virt_len; @@ -1391,7 +1393,7 @@ int ecryptfs_write_metadata(struct dentry *ecryptfs_dentry) rc = ecryptfs_write_metadata_to_xattr(ecryptfs_dentry, virt, size); else - rc = ecryptfs_write_metadata_to_contents(ecryptfs_dentry, virt, + rc = ecryptfs_write_metadata_to_contents(ecryptfs_inode, virt, virt_len); if (rc) { printk(KERN_ERR "%s: Error writing metadata out to lower file; " diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h index 54481a3..a9f29b1 100644 --- a/fs/ecryptfs/ecryptfs_kernel.h +++ b/fs/ecryptfs/ecryptfs_kernel.h @@ -584,9 +584,10 @@ int ecryptfs_init_crypt_ctx(struct ecryptfs_crypt_stat *crypt_stat); int ecryptfs_write_inode_size_to_metadata(struct inode *ecryptfs_inode); int ecryptfs_encrypt_page(struct page *page); int ecryptfs_decrypt_page(struct page *page); -int ecryptfs_write_metadata(struct dentry *ecryptfs_dentry); +int ecryptfs_write_metadata(struct dentry *ecryptfs_dentry, + struct inode *ecryptfs_inode); int ecryptfs_read_metadata(struct dentry *ecryptfs_dentry); -int ecryptfs_new_file_context(struct dentry *ecryptfs_dentry); +int ecryptfs_new_file_context(struct inode *ecryptfs_inode); void ecryptfs_write_crypt_stat_flags(char *page_virt, struct ecryptfs_crypt_stat *crypt_stat, size_t *written); diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index a36d327..32f90a3 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -172,22 +172,23 @@ ecryptfs_create_underlying_file(struct inode *lower_dir_inode, * it. It will also update the eCryptfs directory inode to mimic the * stat of the lower directory inode. * - * Returns zero on success; non-zero on error condition + * Returns the new eCryptfs inode on success; an ERR_PTR on error condition */ -static int +static struct inode * ecryptfs_do_create(struct inode *directory_inode, struct dentry *ecryptfs_dentry, int mode) { int rc; struct dentry *lower_dentry; struct dentry *lower_dir_dentry; + struct inode *inode; lower_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry); lower_dir_dentry = lock_parent(lower_dentry); if (IS_ERR(lower_dir_dentry)) { ecryptfs_printk(KERN_ERR, "Error locking directory of " "dentry\n"); - rc = PTR_ERR(lower_dir_dentry); + inode = ERR_CAST(lower_dir_dentry); goto out; } rc = ecryptfs_create_underlying_file(lower_dir_dentry->d_inode, @@ -195,20 +196,19 @@ ecryptfs_do_create(struct inode *directory_inode, if (rc) { printk(KERN_ERR "%s: Failure to create dentry in lower fs; " "rc = [%d]\n", __func__, rc); + inode = ERR_PTR(rc); goto out_lock; } - rc = ecryptfs_interpose(lower_dentry, ecryptfs_dentry, - directory_inode->i_sb); - if (rc) { - ecryptfs_printk(KERN_ERR, "Failure in ecryptfs_interpose\n"); + inode = __ecryptfs_get_inode(lower_dentry->d_inode, + directory_inode->i_sb); + if (IS_ERR(inode)) goto out_lock; - } fsstack_copy_attr_times(directory_inode, lower_dir_dentry->d_inode); fsstack_copy_inode_size(directory_inode, lower_dir_dentry->d_inode); out_lock: unlock_dir(lower_dir_dentry); out: - return rc; + return inode; } /** @@ -219,26 +219,26 @@ out: * * Returns zero on success */ -static int ecryptfs_initialize_file(struct dentry *ecryptfs_dentry) +static int ecryptfs_initialize_file(struct dentry *ecryptfs_dentry, + struct inode *ecryptfs_inode) { struct ecryptfs_crypt_stat *crypt_stat = - &ecryptfs_inode_to_private(ecryptfs_dentry->d_inode)->crypt_stat; + &ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat; int rc = 0; - if (S_ISDIR(ecryptfs_dentry->d_inode->i_mode)) { + if (S_ISDIR(ecryptfs_inode->i_mode)) { ecryptfs_printk(KERN_DEBUG, "This is a directory\n"); crypt_stat->flags &= ~(ECRYPTFS_ENCRYPTED); goto out; } ecryptfs_printk(KERN_DEBUG, "Initializing crypto context\n"); - rc = ecryptfs_new_file_context(ecryptfs_dentry); + rc = ecryptfs_new_file_context(ecryptfs_inode); if (rc) { ecryptfs_printk(KERN_ERR, "Error creating new file " "context; rc = [%d]\n", rc); goto out; } - rc = ecryptfs_get_lower_file(ecryptfs_dentry, - ecryptfs_dentry->d_inode); + rc = ecryptfs_get_lower_file(ecryptfs_dentry, ecryptfs_inode); if (rc) { printk(KERN_ERR "%s: Error attempting to initialize " "the lower file for the dentry with name " @@ -246,10 +246,10 @@ static int ecryptfs_initialize_file(struct dentry *ecryptfs_dentry) ecryptfs_dentry->d_name.name, rc); goto out; } - rc = ecryptfs_write_metadata(ecryptfs_dentry); + rc = ecryptfs_write_metadata(ecryptfs_dentry, ecryptfs_inode); if (rc) printk(KERN_ERR "Error writing headers; rc = [%d]\n", rc); - ecryptfs_put_lower_file(ecryptfs_dentry->d_inode); + ecryptfs_put_lower_file(ecryptfs_inode); out: return rc; } @@ -269,18 +269,28 @@ static int ecryptfs_create(struct inode *directory_inode, struct dentry *ecryptfs_dentry, int mode, struct nameidata *nd) { + struct inode *ecryptfs_inode; int rc; - /* ecryptfs_do_create() calls ecryptfs_interpose() */ - rc = ecryptfs_do_create(directory_inode, ecryptfs_dentry, mode); - if (unlikely(rc)) { + ecryptfs_inode = ecryptfs_do_create(directory_inode, ecryptfs_dentry, + mode); + if (unlikely(IS_ERR(ecryptfs_inode))) { ecryptfs_printk(KERN_WARNING, "Failed to create file in" "lower filesystem\n"); + rc = PTR_ERR(ecryptfs_inode); goto out; } /* At this point, a file exists on "disk"; we need to make sure * that this on disk file is prepared to be an ecryptfs file */ - rc = ecryptfs_initialize_file(ecryptfs_dentry); + rc = ecryptfs_initialize_file(ecryptfs_dentry, ecryptfs_inode); + if (rc) { + drop_nlink(ecryptfs_inode); + unlock_new_inode(ecryptfs_inode); + iput(ecryptfs_inode); + goto out; + } + d_instantiate(ecryptfs_dentry, ecryptfs_inode); + unlock_new_inode(ecryptfs_inode); out: return rc; } -- cgit v0.10.2 From 32001d6fe9ac6b0423e674a3093aa56740849f3b Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Mon, 21 Nov 2011 17:31:29 -0600 Subject: eCryptfs: Flush file in vma close Dirty pages weren't being written back when an mmap'ed eCryptfs file was closed before the mapping was unmapped. Since f_ops->flush() is not called by the munmap() path, the lower file was simply being released. This patch flushes the eCryptfs file in the vm_ops->close() path. https://launchpad.net/bugs/870326 Signed-off-by: Tyler Hicks Cc: stable@kernel.org [2.6.39+] diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c index c6ac98c..d3f95f9 100644 --- a/fs/ecryptfs/file.c +++ b/fs/ecryptfs/file.c @@ -139,6 +139,27 @@ out: return rc; } +static void ecryptfs_vma_close(struct vm_area_struct *vma) +{ + filemap_write_and_wait(vma->vm_file->f_mapping); +} + +static const struct vm_operations_struct ecryptfs_file_vm_ops = { + .close = ecryptfs_vma_close, + .fault = filemap_fault, +}; + +static int ecryptfs_file_mmap(struct file *file, struct vm_area_struct *vma) +{ + int rc; + + rc = generic_file_mmap(file, vma); + if (!rc) + vma->vm_ops = &ecryptfs_file_vm_ops; + + return rc; +} + struct kmem_cache *ecryptfs_file_info_cache; /** @@ -349,7 +370,7 @@ const struct file_operations ecryptfs_main_fops = { #ifdef CONFIG_COMPAT .compat_ioctl = ecryptfs_compat_ioctl, #endif - .mmap = generic_file_mmap, + .mmap = ecryptfs_file_mmap, .open = ecryptfs_open, .flush = ecryptfs_flush, .release = ecryptfs_release, -- cgit v0.10.2 From 0f751e641a71157aa584c2a2e22fda52b52b8a56 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Wed, 23 Nov 2011 11:31:24 -0600 Subject: eCryptfs: Extend array bounds for all filename chars From mhalcrow's original commit message: Characters with ASCII values greater than the size of filename_rev_map[] are valid filename characters. ecryptfs_decode_from_filename() will access kernel memory beyond that array, and ecryptfs_parse_tag_70_packet() will then decrypt those characters. The attacker, using the FNEK of the crafted file, can then re-encrypt the characters to reveal the kernel memory past the end of the filename_rev_map[] array. I expect low security impact since this array is statically allocated in the text area, and the amount of memory past the array that is accessible is limited by the largest possible ASCII filename character. This patch solves the issue reported by mhalcrow but with an implementation suggested by Linus to simply extend the length of filename_rev_map[] to 256. Characters greater than 0x7A are mapped to 0x00, which is how invalid characters less than 0x7A were previously being handled. Signed-off-by: Tyler Hicks Reported-by: Michael Halcrow Cc: stable@kernel.org diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c index 203a1fd..2a83425 100644 --- a/fs/ecryptfs/crypto.c +++ b/fs/ecryptfs/crypto.c @@ -1945,7 +1945,7 @@ static unsigned char *portable_filename_chars = ("-.0123456789ABCD" /* We could either offset on every reverse map or just pad some 0x00's * at the front here */ -static const unsigned char filename_rev_map[] = { +static const unsigned char filename_rev_map[256] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 7 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 15 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 23 */ @@ -1961,7 +1961,7 @@ static const unsigned char filename_rev_map[] = { 0x00, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x2B, 0x2C, /* 103 */ 0x2D, 0x2E, 0x2F, 0x30, 0x31, 0x32, 0x33, 0x34, /* 111 */ 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x3B, 0x3C, /* 119 */ - 0x3D, 0x3E, 0x3F + 0x3D, 0x3E, 0x3F /* 123 - 255 initialized to 0x00 */ }; /** -- cgit v0.10.2 From cc1b0765da6078b906772b79ff211b88cc0ae958 Mon Sep 17 00:00:00 2001 From: sricharan Date: Wed, 23 Nov 2011 14:35:07 -0800 Subject: ARM: OMAP: hwmod: Fix the addr space, irq, dma count APIs The address spaces, irqs and dma reqs count APIs return the number of corresponding entries in a hwmod including a additional null value or a -1 terminator in the structure introduced recently. More information here: - 212738a4: omap_hwmod: use a terminator record with omap_hwmod_mpu_irqs arrays - 78183f3f: omap_hwmod: use a null structure record to terminate omap_hwmod_addr_space arrays - bc614958: omap_hwmod: use a terminator record with omap_hwmod_dma_info arrays The issue with irqs and dma info was originally reported by Benoit Cousson. The devices which have multiple hwmods and use device_build_ss are broken with this, as their resources are populated with a extra null value, subsequently the probe fails. So fix the API not to include the array terminator in the count. Reported-by: Benoit Cousson Signed-off-by: Santosh Shilimkar Signed-off-by: sricharan Signed-off-by: Benoit Cousson Cc: Paul Walmsley Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 6b3088d..207a2ff 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -749,7 +749,7 @@ static int _count_mpu_irqs(struct omap_hwmod *oh) ohii = &oh->mpu_irqs[i++]; } while (ohii->irq != -1); - return i; + return i-1; } /** @@ -772,7 +772,7 @@ static int _count_sdma_reqs(struct omap_hwmod *oh) ohdi = &oh->sdma_reqs[i++]; } while (ohdi->dma_req != -1); - return i; + return i-1; } /** @@ -795,7 +795,7 @@ static int _count_ocp_if_addr_spaces(struct omap_hwmod_ocp_if *os) mem = &os->addr[i++]; } while (mem->pa_start != mem->pa_end); - return i; + return i-1; } /** -- cgit v0.10.2 From 46232a3622c6e33605906ee6690dfef372925f53 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 23 Nov 2011 14:43:01 -0800 Subject: ARM: OMAP: PM: only register TWL with voltage layer when device is present Current code registers voltage layer details for TWL PMIC even when a TWL has not been registered. Fix this to only register the TWL with voltage layer when the TWL PMIC is initialized by board-level code. Signed-off-by: Kevin Hilman Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 1e79bdf..00bff46 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -24,6 +24,7 @@ #include "powerdomain.h" #include "clockdomain.h" #include "pm.h" +#include "twl-common.h" static struct omap_device_pm_latency *pm_lats; @@ -226,11 +227,8 @@ postcore_initcall(omap2_common_pm_init); static int __init omap2_common_pm_late_init(void) { - /* Init the OMAP TWL parameters */ - omap3_twl_init(); - omap4_twl_init(); - /* Init the voltage layer */ + omap_pmic_late_init(); omap_voltage_late_init(); /* Initialize the voltages */ diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 52243577..10b20c6 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -30,6 +30,7 @@ #include #include "twl-common.h" +#include "pm.h" static struct i2c_board_info __initdata pmic_i2c_board_info = { .addr = 0x48, @@ -48,6 +49,16 @@ void __init omap_pmic_init(int bus, u32 clkrate, omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); } +void __init omap_pmic_late_init(void) +{ + /* Init the OMAP TWL parameters (if PMIC has been registerd) */ + if (!pmic_i2c_board_info.irq) + return; + + omap3_twl_init(); + omap4_twl_init(); +} + #if defined(CONFIG_ARCH_OMAP3) static struct twl4030_usb_data omap3_usb_pdata = { .usb_mode = T2_USB_MODE_ULPI, diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h index 5e83a5b..275dde8 100644 --- a/arch/arm/mach-omap2/twl-common.h +++ b/arch/arm/mach-omap2/twl-common.h @@ -1,6 +1,8 @@ #ifndef __OMAP_PMIC_COMMON__ #define __OMAP_PMIC_COMMON__ +#include + #define TWL_COMMON_PDATA_USB (1 << 0) #define TWL_COMMON_PDATA_BCI (1 << 1) #define TWL_COMMON_PDATA_MADC (1 << 2) @@ -30,6 +32,7 @@ struct twl4030_platform_data; void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data); +void omap_pmic_late_init(void); static inline void omap2_pmic_init(const char *pmic_type, struct twl4030_platform_data *pmic_data) -- cgit v0.10.2 From 5a4f1844c2ba21f804d7729306d9b16eaeb724a8 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 23 Nov 2011 14:43:37 -0800 Subject: ARM: OMAP: smartreflex: fix IRQ handling bug Fix a bug which has been on this driver since it was added by the original commit 984aa6db which would never clear IRQSTATUS bits. Signed-off-by: Felipe Balbi Signed-off-by: Kevin Hilman Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 6a4f683..cf246b3 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -139,7 +139,7 @@ static irqreturn_t sr_interrupt(int irq, void *data) sr_write_reg(sr_info, ERRCONFIG_V1, status); } else if (sr_info->ip_type == SR_TYPE_V2) { /* Read the status bits */ - sr_read_reg(sr_info, IRQSTATUS); + status = sr_read_reg(sr_info, IRQSTATUS); /* Clear them by writing back */ sr_write_reg(sr_info, IRQSTATUS, status); -- cgit v0.10.2 From a8a6565c7615cab3608d75af95b5c8a3522cd7c4 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Wed, 23 Nov 2011 14:44:50 -0800 Subject: ARM: OMAP2: select ARM_AMBA if OMAP3_EMU is defined This patch selects ARM_AMBA if OMAP3_EMU is defined because OC_ETM depends on ARM_AMBA, so fix the link failure[1]. [1], arch/arm/kernel/built-in.o: In function `etm_remove': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:609: undefined reference to `amba_release_regions' arch/arm/kernel/built-in.o: In function `etb_remove': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:409: undefined reference to `amba_release_regions' arch/arm/kernel/built-in.o: In function `etm_init': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:640: undefined reference to `amba_driver_register' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:646: undefined reference to `amba_driver_register' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:648: undefined reference to `amba_driver_unregister' arch/arm/kernel/built-in.o: In function `etm_probe': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:545: undefined reference to `amba_request_regions' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:595: undefined reference to `amba_release_regions' arch/arm/kernel/built-in.o: In function `etb_probe': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:347: undefined reference to `amba_request_regions' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:392: undefined reference to `amba_release_regions' arch/arm/mach-omap2/built-in.o: In function `emu_init': /home/tom/git/omap/linux-2.6-omap/arch/arm/mach-omap2/emu.c:62: undefined reference to `amba_device_register' /home/tom/git/omap/linux-2.6-omap/arch/arm/mach-omap2/emu.c:63: undefined reference to `amba_device_register' make: *** [.tmp_vmlinux1] Error 1 making modules Signed-off-by: Ming Lei Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 5034147..e1293aa 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -334,6 +334,7 @@ config MACH_OMAP4_PANDA config OMAP3_EMU bool "OMAP3 debugging peripherals" depends on ARCH_OMAP3 + select ARM_AMBA select OC_ETM help Say Y here to enable debugging hardware of omap3 -- cgit v0.10.2 From 52a2396249478018ea2e83d962a347d38d8cccbe Mon Sep 17 00:00:00 2001 From: Thomas Weber Date: Wed, 23 Nov 2011 14:45:22 -0800 Subject: ARM: OMAP2+: Remove empty io.h The file arch/arm/mach-omap2/io.h is empty, so we can remove it. Signed-off-by: Thomas Weber Acked-by: Kevin Hilman Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/io.h b/arch/arm/mach-omap2/io.h deleted file mode 100644 index e69de29..0000000 -- cgit v0.10.2 From 8770b07c2dff3cec2c751b289ee690137c88ea54 Mon Sep 17 00:00:00 2001 From: "Govindraj.R" Date: Wed, 23 Nov 2011 14:45:37 -0800 Subject: ARM: OMAP2+: Fix Compilation error when omap_l3_noc built as module Fix below compilation failure on mainline kernel 3.2-rc1 when omap_l3_noc.c is built as module. arch/arm/mach-omap2/omap_l3_noc.c:240: error: expected ',' or ';' before 'MODULE_DEVICE_TABLE' Signed-off-by: Govindraj.R Acked-by: Santosh Shilimkar Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c index 6a66aa5..d15225f 100644 --- a/arch/arm/mach-omap2/omap_l3_noc.c +++ b/arch/arm/mach-omap2/omap_l3_noc.c @@ -237,7 +237,7 @@ static int __devexit omap4_l3_remove(struct platform_device *pdev) static const struct of_device_id l3_noc_match[] = { {.compatible = "ti,omap4-l3-noc", }, {}, -} +}; MODULE_DEVICE_TABLE(of, l3_noc_match); #else #define l3_noc_match NULL -- cgit v0.10.2 From bd20817f733ceb0291e0449106307ffc939006ba Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 15 Nov 2011 10:13:24 +0100 Subject: virtio: add HAS_IOMEM dependency to MMIO platform bus driver Fix this compile error on s390: CC [M] drivers/virtio/virtio_mmio.o drivers/virtio/virtio_mmio.c: In function 'vm_get_features': drivers/virtio/virtio_mmio.c:107:2: error: implicit declaration of function 'writel' Cc: Christian Borntraeger Signed-off-by: Heiko Carstens Acked-by: Pawel Moll Signed-off-by: Rusty Russell diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig index 816ed08..1a61939 100644 --- a/drivers/virtio/Kconfig +++ b/drivers/virtio/Kconfig @@ -37,7 +37,7 @@ config VIRTIO_BALLOON config VIRTIO_MMIO tristate "Platform bus driver for memory mapped virtio devices (EXPERIMENTAL)" - depends on EXPERIMENTAL + depends on HAS_IOMEM && EXPERIMENTAL select VIRTIO select VIRTIO_RING ---help--- -- cgit v0.10.2 From fe1a7fe2c4456679b3402f04268bdfafca7b127a Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Tue, 15 Nov 2011 16:17:18 +0200 Subject: virtio-mmio: Correct the name of the guest features selector Guest features selector spelling mistake. Cc: Pawel Moll Cc: Rusty Russell Cc: virtualization@lists.linux-foundation.org Signed-off-by: Sasha Levin Signed-off-by: Rusty Russell diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c index acc5e43..7317dc2 100644 --- a/drivers/virtio/virtio_mmio.c +++ b/drivers/virtio/virtio_mmio.c @@ -118,7 +118,7 @@ static void vm_finalize_features(struct virtio_device *vdev) vring_transport_features(vdev); for (i = 0; i < ARRAY_SIZE(vdev->features); i++) { - writel(i, vm_dev->base + VIRTIO_MMIO_GUEST_FEATURES_SET); + writel(i, vm_dev->base + VIRTIO_MMIO_GUEST_FEATURES_SEL); writel(vdev->features[i], vm_dev->base + VIRTIO_MMIO_GUEST_FEATURES); } diff --git a/include/linux/virtio_mmio.h b/include/linux/virtio_mmio.h index 27c7ede..5c7b6f0 100644 --- a/include/linux/virtio_mmio.h +++ b/include/linux/virtio_mmio.h @@ -63,7 +63,7 @@ #define VIRTIO_MMIO_GUEST_FEATURES 0x020 /* Activated features set selector - Write Only */ -#define VIRTIO_MMIO_GUEST_FEATURES_SET 0x024 +#define VIRTIO_MMIO_GUEST_FEATURES_SEL 0x024 /* Guest's memory page size in bytes - Write Only */ #define VIRTIO_MMIO_GUEST_PAGE_SIZE 0x028 -- cgit v0.10.2 From e6af578c5305be693a1bc7f4dc7b51dd82d41425 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Thu, 17 Nov 2011 17:41:15 +0200 Subject: virtio-pci: make reset operation safer virtio pci device reset actually just does an I/O write, which in PCI is really posted, that is it can complete on CPU before the device has received it. Further, interrupts might have been pending on another CPU, so device callback might get invoked after reset. This conflicts with how drivers use reset, which is typically: reset unregister a callback running after reset completed can race with unregister, potentially leading to use after free bugs. Fix by flushing out the write, and flushing pending interrupts. This assumes that device is never reset from its vq/config callbacks, or in parallel with being added/removed, document this assumption. Signed-off-by: Michael S. Tsirkin Signed-off-by: Rusty Russell diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c index 3d1bf41..03d1984 100644 --- a/drivers/virtio/virtio_pci.c +++ b/drivers/virtio/virtio_pci.c @@ -169,11 +169,29 @@ static void vp_set_status(struct virtio_device *vdev, u8 status) iowrite8(status, vp_dev->ioaddr + VIRTIO_PCI_STATUS); } +/* wait for pending irq handlers */ +static void vp_synchronize_vectors(struct virtio_device *vdev) +{ + struct virtio_pci_device *vp_dev = to_vp_device(vdev); + int i; + + if (vp_dev->intx_enabled) + synchronize_irq(vp_dev->pci_dev->irq); + + for (i = 0; i < vp_dev->msix_vectors; ++i) + synchronize_irq(vp_dev->msix_entries[i].vector); +} + static void vp_reset(struct virtio_device *vdev) { struct virtio_pci_device *vp_dev = to_vp_device(vdev); /* 0 status means a reset. */ iowrite8(0, vp_dev->ioaddr + VIRTIO_PCI_STATUS); + /* Flush out the status write, and flush in device writes, + * including MSi-X interrupts, if any. */ + ioread8(vp_dev->ioaddr + VIRTIO_PCI_STATUS); + /* Flush pending VQ/configuration callbacks. */ + vp_synchronize_vectors(vdev); } /* the notify function used when creating a virt queue */ diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h index add4790..e9e72bd 100644 --- a/include/linux/virtio_config.h +++ b/include/linux/virtio_config.h @@ -85,6 +85,8 @@ * @reset: reset the device * vdev: the virtio device * After this, status and feature negotiation must be done again + * Device must not be reset from its vq/config callbacks, or in + * parallel with being added/removed. * @find_vqs: find virtqueues and instantiate them. * vdev: the virtio_device * nvqs: the number of virtqueues to find -- cgit v0.10.2 From caca6a03d365883564885f2c1da3e88dcf65d139 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 23 Nov 2011 20:20:28 -0800 Subject: Linux 3.2-rc3 diff --git a/Makefile b/Makefile index dab8610..3a8f064 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 2 SUBLEVEL = 0 -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 NAME = Saber-toothed Squirrel # *DOCUMENTATION* -- cgit v0.10.2 From c3c3ced77fd1949af753be7731bfdadae88a226b Mon Sep 17 00:00:00 2001 From: Roy Zang Date: Mon, 7 Nov 2011 16:32:58 +0800 Subject: powerpc/p1023: set IRQ[4:6,11] to active-high level sensitive for PCIe P1023 external IRQ[4:6, 11] are not pin out, but the interrupts are utilized by the PCIe controllers. As they are not exposed as pins we need to set them as active-high (internal to the SoC these interrupts are pulled down). IRQs[0:3,7:10] are pulled up on the board so we have them set as active-low. Signed-off-by: Roy Zang Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/p1023rds.dts b/arch/powerpc/boot/dts/p1023rds.dts index d9b7767..d3b4782 100644 --- a/arch/powerpc/boot/dts/p1023rds.dts +++ b/arch/powerpc/boot/dts/p1023rds.dts @@ -449,6 +449,7 @@ interrupt-parent = <&mpic>; interrupts = <16 2>; interrupt-map-mask = <0xf800 0 0 7>; + /* IRQ[0:3] are pulled up on board, set to active-low */ interrupt-map = < /* IDSEL 0x0 */ 0000 0 0 1 &mpic 0 1 @@ -488,11 +489,15 @@ interrupt-parent = <&mpic>; interrupts = <16 2>; interrupt-map-mask = <0xf800 0 0 7>; + /* + * IRQ[4:6] only for PCIe, set to active-high, + * IRQ[7] is pulled up on board, set to active-low + */ interrupt-map = < /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 4 1 - 0000 0 0 2 &mpic 5 1 - 0000 0 0 3 &mpic 6 1 + 0000 0 0 1 &mpic 4 2 + 0000 0 0 2 &mpic 5 2 + 0000 0 0 3 &mpic 6 2 0000 0 0 4 &mpic 7 1 >; ranges = <0x2000000 0x0 0xa0000000 @@ -527,12 +532,16 @@ interrupt-parent = <&mpic>; interrupts = <16 2>; interrupt-map-mask = <0xf800 0 0 7>; + /* + * IRQ[8:10] are pulled up on board, set to active-low + * IRQ[11] only for PCIe, set to active-high, + */ interrupt-map = < /* IDSEL 0x0 */ 0000 0 0 1 &mpic 8 1 0000 0 0 2 &mpic 9 1 0000 0 0 3 &mpic 10 1 - 0000 0 0 4 &mpic 11 1 + 0000 0 0 4 &mpic 11 2 >; ranges = <0x2000000 0x0 0x80000000 0x2000000 0x0 0x80000000 -- cgit v0.10.2 From a92282524aee149de0014eef10a0771d1d19821f Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Sun, 13 Nov 2011 00:50:30 +0100 Subject: powerpc/p3060qds: Fix select of 'MPC8xxx_GPIO' The driver for the Freescale P3060 QDS got added by commit 96cc017c5b ("[...] Add support for P3060QDS board"). Its Kconfig entry selects MPC8xxx_GPIO. But at the time that driver got added MPC8xxx_GPIO was already renamed to GPIO_MPC8XXX, by commit c68308dd50c ("gpio: move mpc8xxx/512x gpio driver to drivers/gpio"). So make this driver select GPIO_MPC8XXX. Signed-off-by: Paul Bolle Acked-by: Wolfram Sang Signed-off-by: Kumar Gala diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 45023e2..d7946be2 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -203,7 +203,7 @@ config P3060_QDS select PPC_E500MC select PHYS_64BIT select SWIOTLB - select MPC8xxx_GPIO + select GPIO_MPC8XXX select HAS_RAPIDIO select PPC_EPAPR_HV_PIC help -- cgit v0.10.2 From 05011f370a4f549da69f3841e319043728f65542 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sun, 20 Nov 2011 09:58:11 -0600 Subject: powerpc/85xx: Fix compile error on p3060_qds.c arch/powerpc/platforms/85xx/p3060_qds.c: In function '__machine_initcall_p3060_qds_declare_of_platform_devices': arch/powerpc/platforms/85xx/p3060_qds.c:73:1: error: implicit declaration of function 'declare_of_platform_devices' declare_of_platform_devices should have been corenet_ds_publish_devices. Signed-off-by: Kumar Gala diff --git a/arch/powerpc/platforms/85xx/p3060_qds.c b/arch/powerpc/platforms/85xx/p3060_qds.c index 01dcf44..081cf4a 100644 --- a/arch/powerpc/platforms/85xx/p3060_qds.c +++ b/arch/powerpc/platforms/85xx/p3060_qds.c @@ -70,7 +70,7 @@ define_machine(p3060_qds) { .power_save = e500_idle, }; -machine_device_initcall(p3060_qds, declare_of_platform_devices); +machine_device_initcall(p3060_qds, corenet_ds_publish_devices); #ifdef CONFIG_SWIOTLB machine_arch_initcall(p3060_qds, swiotlb_setup_bus_notifier); -- cgit v0.10.2 From 42d623a8cd08eb93ab221d22cee5a62618895bbf Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Wed, 23 Nov 2011 09:14:38 -0600 Subject: slub: use irqsafe_cpu_cmpxchg for put_cpu_partial The cmpxchg must be irq safe. The fallback for this_cpu_cmpxchg only disables preemption which results in per cpu partial page operation potentially failing on non x86 platforms. This patch fixes the following problem reported by Christian Kujau: I seem to hit it with heavy disk & cpu IO is in progress on this PowerBook G4. Full dmesg & .config: http://nerdbynature.de/bits/3.2.0-rc1/oops/ I've enabled some debug options and now it really points to slub.c:2166 http://nerdbynature.de/bits/3.2.0-rc1/oops/oops4m.jpg With debug options enabled I'm currently in the xmon debugger, not sure what to make of it yet, I'll try to get something useful out of it :) Reported-by: Christian Kujau Tested-by: Christian Kujau Acked-by: Eric Dumazet Acked-by: David Rientjes Signed-off-by: Christoph Lameter Signed-off-by: Pekka Enberg diff --git a/mm/slub.c b/mm/slub.c index 00efbb5..2a9cfd7 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -1978,7 +1978,7 @@ int put_cpu_partial(struct kmem_cache *s, struct page *page, int drain) page->pobjects = pobjects; page->next = oldpage; - } while (this_cpu_cmpxchg(s->cpu_slab->partial, oldpage, page) != oldpage); + } while (irqsafe_cpu_cmpxchg(s->cpu_slab->partial, oldpage, page) != oldpage); stat(s, CPU_PARTIAL_FREE); return pobjects; } -- cgit v0.10.2 From bc6697d8a506dedf09e8e9974ffa3a316183e608 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 22 Nov 2011 16:02:02 +0100 Subject: slub: avoid potential NULL dereference or corruption show_slab_objects() can trigger NULL dereferences or memory corruption. Another cpu can change its c->page to NULL or c->node to NUMA_NO_NODE while we use them. Use ACCESS_ONCE(c->page) and ACCESS_ONCE(c->node) to make sure this cannot happen. Acked-by: Christoph Lameter Acked-by: David Rientjes Signed-off-by: Eric Dumazet Signed-off-by: Pekka Enberg diff --git a/mm/slub.c b/mm/slub.c index 2a9cfd7..ed3334d 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -4444,30 +4444,31 @@ static ssize_t show_slab_objects(struct kmem_cache *s, for_each_possible_cpu(cpu) { struct kmem_cache_cpu *c = per_cpu_ptr(s->cpu_slab, cpu); + int node = ACCESS_ONCE(c->node); struct page *page; - if (!c || c->node < 0) + if (node < 0) continue; - - if (c->page) { - if (flags & SO_TOTAL) - x = c->page->objects; + page = ACCESS_ONCE(c->page); + if (page) { + if (flags & SO_TOTAL) + x = page->objects; else if (flags & SO_OBJECTS) - x = c->page->inuse; + x = page->inuse; else x = 1; total += x; - nodes[c->node] += x; + nodes[node] += x; } page = c->partial; if (page) { x = page->pobjects; - total += x; - nodes[c->node] += x; + total += x; + nodes[node] += x; } - per_cpu[c->node]++; + per_cpu[node]++; } } -- cgit v0.10.2 From ae5f8c19827493e5a8d48c2c6a8a92201a94f08b Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Tue, 23 Aug 2011 14:30:05 +0200 Subject: powerpc/qe: Fixup QE_General4 errata QE_General4 should only round up the divisor iff divisor is > 3. Rounding up lower divisors makes the error too big, causing USB on MPC832x to fail. Signed-off-by: Joakim Tjernlund Acked-by: Timur Tabi Signed-off-by: Kumar Gala diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c index 3363fbc..ceb09cb 100644 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -216,7 +216,7 @@ int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier) /* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says that the BRG divisor must be even if you're not using divide-by-16 mode. */ - if (!div16 && (divisor & 1)) + if (!div16 && (divisor & 1) && (divisor > 3)) divisor++; tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | -- cgit v0.10.2 From 86f9a4330580b4ed3d5f7d5b0989ae69518c90f5 Mon Sep 17 00:00:00 2001 From: Shaohui Xie Date: Tue, 15 Nov 2011 14:52:22 -0800 Subject: drivers/edac/mpc85xx_edac.c: fix memory controller compatible for edac compatible in dts has been changed, so the driver needs to be updated accordingly. Signed-off-by: Shaohui Xie Cc: Grant Likely Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Kumar Gala diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c index 8af8e86..73464a6 100644 --- a/drivers/edac/mpc85xx_edac.c +++ b/drivers/edac/mpc85xx_edac.c @@ -1128,7 +1128,7 @@ static struct of_device_id mpc85xx_mc_err_of_match[] = { { .compatible = "fsl,p1020-memory-controller", }, { .compatible = "fsl,p1021-memory-controller", }, { .compatible = "fsl,p2020-memory-controller", }, - { .compatible = "fsl,p4080-memory-controller", }, + { .compatible = "fsl,qoriq-memory-controller", }, {}, }; MODULE_DEVICE_TABLE(of, mpc85xx_mc_err_of_match); -- cgit v0.10.2 From 7145cf12095265b8a292835d0f6da87f89fac1d1 Mon Sep 17 00:00:00 2001 From: Alexandre Rusev Date: Thu, 27 Oct 2011 18:18:37 +0400 Subject: powerpc/fsl-lbc: Fix for fsl_upm If Freescale LBC driver fails to initialise itself from device tree, then internal structure is freed only but not NULL-fied. As result functions fsl_lbc_find() after checking the structure is not NULL are trying to access device registers. Signed-off-by: Alexandre Rusev Signed-off-by: Kumar Gala diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c index c4d96fa..d5c3c90 100644 --- a/arch/powerpc/sysdev/fsl_lbc.c +++ b/arch/powerpc/sysdev/fsl_lbc.c @@ -328,6 +328,7 @@ static int __devinit fsl_lbc_ctrl_probe(struct platform_device *dev) err: iounmap(fsl_lbc_ctrl_dev->regs); kfree(fsl_lbc_ctrl_dev); + fsl_lbc_ctrl_dev = NULL; return ret; } -- cgit v0.10.2 From e3854b6e25d1b092c30c5f81a04fe6fc839b1e26 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 8 Aug 2011 13:18:02 +0200 Subject: arch/powerpc/sysdev/ehv_pic.c: add missing kfree At this point, ehv_pic has been allocated but not stored anywhere, so it should be freed before leaving the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @exists@ local idexpression x; statement S,S1; expression E; identifier fl; expression *ptr != NULL; @@ x = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...kfree(x)...+> } when any when != true x == NULL x->fl ...> ( if (x == NULL) S1 | if (...) { ... when != x when forall ( return \(0\|<+...x...+>\|ptr\); | * return ...; ) } ) // Signed-off-by: Julia Lawall Acked-by: Timur Tabi Signed-off-by: Kumar Gala diff --git a/arch/powerpc/sysdev/ehv_pic.c b/arch/powerpc/sysdev/ehv_pic.c index af1a5df..b6731e4 100644 --- a/arch/powerpc/sysdev/ehv_pic.c +++ b/arch/powerpc/sysdev/ehv_pic.c @@ -280,6 +280,7 @@ void __init ehv_pic_init(void) if (!ehv_pic->irqhost) { of_node_put(np); + kfree(ehv_pic); return; } -- cgit v0.10.2 From 85d096db6764fd89cea232cf64b65a5f3b0f1ffc Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 16 Oct 2011 00:07:20 +0800 Subject: ARM: at91: rename defconfig files appropriately rename all Atmel reference board as soc defconfig Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre Signed-off-by: Arnd Bergmann diff --git a/arch/arm/configs/at91cap9_defconfig b/arch/arm/configs/at91cap9_defconfig new file mode 100644 index 0000000..ffb1edd --- /dev/null +++ b/arch/arm/configs/at91cap9_defconfig @@ -0,0 +1,115 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91CAP9=y +CONFIG_MACH_AT91CAP9ADK=y +CONFIG_MTD_AT91_DATAFLASH_CARD=y +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +# CONFIG_ARM_THUMB is not set +CONFIG_AEABI=y +CONFIG_LEDS=y +CONFIG_LEDS_CPU=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw" +CONFIG_FPE_NWFPE=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ATMEL=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_ATMEL_SSC=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_NETDEVICES=y +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_MACB=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_SERIO is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_SPI=y +CONFIG_SPI_ATMEL=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_FB=y +CONFIG_FB_ATMEL=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +# CONFIG_USB_HID is not set +CONFIG_USB=y +CONFIG_USB_DEVICEFS=y +CONFIG_USB_MON=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_ETH=m +CONFIG_USB_FILE_STORAGE=m +CONFIG_MMC=y +CONFIG_MMC_AT91=m +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_EXT2_FS=y +CONFIG_INOTIFY=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_CRAMFS=y +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig deleted file mode 100644 index ffb1edd..0000000 --- a/arch/arm/configs/at91cap9adk_defconfig +++ /dev/null @@ -1,115 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91CAP9=y -CONFIG_MACH_AT91CAP9ADK=y -CONFIG_MTD_AT91_DATAFLASH_CARD=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_AEABI=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_FB=y -CONFIG_FB_ATMEL=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_MMC=y -CONFIG_MMC_AT91=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/at91sam9260_defconfig b/arch/arm/configs/at91sam9260_defconfig new file mode 100644 index 0000000..f8a9226 --- /dev/null +++ b/arch/arm/configs/at91sam9260_defconfig @@ -0,0 +1,83 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91SAM9260=y +CONFIG_MACH_AT91SAM9260EK=y +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +# CONFIG_ARM_THUMB is not set +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" +CONFIG_FPE_NWFPE=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_IPV6 is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_ATMEL_SSC=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_NETDEVICES=y +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_MACB=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_GPIO=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_AT91SAM9X_WATCHDOG=y +# CONFIG_VGA_CONSOLE is not set +# CONFIG_USB_HID is not set +CONFIG_USB=y +CONFIG_USB_DEVICEFS=y +CONFIG_USB_MON=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_USB_STORAGE_DEBUG=y +CONFIG_USB_GADGET=y +CONFIG_USB_ZERO=m +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_G_SERIAL=m +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_EXT2_FS=y +CONFIG_INOTIFY=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_CRAMFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig deleted file mode 100644 index f8a9226..0000000 --- a/arch/arm/configs/at91sam9260ek_defconfig +++ /dev/null @@ -1,83 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9260=y -CONFIG_MACH_AT91SAM9260EK=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91SAM9X_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_STORAGE_DEBUG=y -CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig new file mode 100644 index 0000000..9e90e6d --- /dev/null +++ b/arch/arm/configs/at91sam9g20_defconfig @@ -0,0 +1,123 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91SAM9G20=y +CONFIG_MACH_AT91SAM9G20EK=y +CONFIG_MACH_AT91SAM9G20EK_2MMC=y +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +# CONFIG_ARM_THUMB is not set +CONFIG_AEABI=y +CONFIG_LEDS=y +CONFIG_LEDS_CPU=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" +CONFIG_FPE_NWFPE=y +CONFIG_PM=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_IPV6 is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ATMEL=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_ATMEL_SSC=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_NETDEVICES=y +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_MACB=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_LEGACY_PTY_COUNT=16 +CONFIG_HW_RANDOM=y +CONFIG_SPI=y +CONFIG_SPI_ATMEL=y +CONFIG_SPI_SPIDEV=y +# CONFIG_HWMON is not set +# CONFIG_VGA_CONSOLE is not set +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_VERBOSE_PROCFS is not set +CONFIG_SND_AT73C213=y +CONFIG_USB=y +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_MON=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_ZERO=m +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_G_SERIAL=m +CONFIG_MMC=y +CONFIG_MMC_AT91=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_EXT2_FS=y +CONFIG_INOTIFY=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_CRAMFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_15=y +CONFIG_NLS_UTF8=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig deleted file mode 100644 index 9e90e6d..0000000 --- a/arch/arm/configs/at91sam9g20ek_defconfig +++ /dev/null @@ -1,123 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9G20=y -CONFIG_MACH_AT91SAM9G20EK=y -CONFIG_MACH_AT91SAM9G20EK_2MMC=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_AEABI=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=16 -CONFIG_HW_RANDOM=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -CONFIG_SPI_SPIDEV=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_SEQUENCER=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_SEQUENCER_OSS=y -# CONFIG_SND_VERBOSE_PROCFS is not set -CONFIG_SND_AT73C213=y -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_MMC=y -CONFIG_MMC_AT91=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_15=y -CONFIG_NLS_UTF8=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set diff --git a/arch/arm/configs/at91sam9rl_defconfig b/arch/arm/configs/at91sam9rl_defconfig new file mode 100644 index 0000000..75621e4 --- /dev/null +++ b/arch/arm/configs/at91sam9rl_defconfig @@ -0,0 +1,84 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91SAM9RL=y +CONFIG_MACH_AT91SAM9RLEK=y +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +# CONFIG_ARM_THUMB is not set +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw" +CONFIG_FPE_NWFPE=y +CONFIG_NET=y +CONFIG_UNIX=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ATMEL=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=24576 +CONFIG_ATMEL_SSC=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y +# CONFIG_SERIO is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_GPIO=y +CONFIG_SPI=y +CONFIG_SPI_ATMEL=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_AT91SAM9X_WATCHDOG=y +CONFIG_FB=y +CONFIG_FB_ATMEL=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_MMC=y +CONFIG_MMC_AT91=m +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_EXT2_FS=y +CONFIG_INOTIFY=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_CRAMFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_15=y +CONFIG_NLS_UTF8=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig deleted file mode 100644 index 75621e4..0000000 --- a/arch/arm/configs/at91sam9rlek_defconfig +++ /dev/null @@ -1,84 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9RL=y -CONFIG_MACH_AT91SAM9RLEK=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_UNIX=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=4 -CONFIG_BLK_DEV_RAM_SIZE=24576 -CONFIG_ATMEL_SSC=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91SAM9X_WATCHDOG=y -CONFIG_FB=y -CONFIG_FB_ATMEL=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_MMC=y -CONFIG_MMC_AT91=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_15=y -CONFIG_NLS_UTF8=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -- cgit v0.10.2 From 9f939adeb2d0bcc079a8b2684761b34709d65407 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 16 Oct 2011 00:07:20 +0800 Subject: ARM: at91: refresh soc defconfig files for 3.2 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre Signed-off-by: Arnd Bergmann diff --git a/arch/arm/configs/at91cap9_defconfig b/arch/arm/configs/at91cap9_defconfig index ffb1edd..8826eb2 100644 --- a/arch/arm/configs/at91cap9_defconfig +++ b/arch/arm/configs/at91cap9_defconfig @@ -38,7 +38,6 @@ CONFIG_IP_PNP_RARP=y # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -52,16 +51,12 @@ CONFIG_MTD_NAND_ATMEL=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set @@ -81,7 +76,6 @@ CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_FB=y CONFIG_FB_ATMEL=y -# CONFIG_VGA_CONSOLE is not set CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_CLUT224 is not set @@ -99,7 +93,6 @@ CONFIG_MMC_AT91=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig index 38cb7c9..bbe4e1a 100644 --- a/arch/arm/configs/at91rm9200_defconfig +++ b/arch/arm/configs/at91rm9200_defconfig @@ -5,7 +5,6 @@ CONFIG_SYSVIPC=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y @@ -56,7 +55,6 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m @@ -75,18 +73,8 @@ CONFIG_IPV6_TUNNEL=m CONFIG_BRIDGE=m CONFIG_VLAN_8021Q=m CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_AFS_PARTS=y CONFIG_MTD_CHAR=y @@ -108,8 +96,6 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_TCLIB=y -CONFIG_EEPROM_LEGACY=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=m @@ -119,14 +105,23 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y CONFIG_TUN=m +CONFIG_ARM_AT91_ETHER=y CONFIG_PHYLIB=y CONFIG_DAVICOM_PHY=y CONFIG_SMSC_PHY=y CONFIG_MICREL_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +CONFIG_PPP=y +CONFIG_PPP_BSDCOMP=y +CONFIG_PPP_DEFLATE=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_MPPE=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPPOE=m +CONFIG_PPP_ASYNC=y +CONFIG_SLIP=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m @@ -139,18 +134,6 @@ CONFIG_USB_NET_RNDIS_HOST=m CONFIG_USB_ALI_M5632=y CONFIG_USB_AN2720=y CONFIG_USB_EPSON2888=y -CONFIG_PPP=y -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=y -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_BSDCOMP=y -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 @@ -158,9 +141,9 @@ CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_LEGACY_PTY_COUNT=32 CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=32 CONFIG_HW_RANDOM=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -290,7 +273,6 @@ CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y -CONFIG_SMB_FS=m CONFIG_CIFS=m CONFIG_PARTITION_ADVANCED=y CONFIG_MAC_PARTITION=y @@ -335,7 +317,6 @@ CONFIG_NLS_UTF8=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_FTRACE is not set CONFIG_CRYPTO_PCBC=y CONFIG_CRYPTO_SHA1=y diff --git a/arch/arm/configs/at91sam9260_defconfig b/arch/arm/configs/at91sam9260_defconfig index f8a9226..8a4c22d 100644 --- a/arch/arm/configs/at91sam9260_defconfig +++ b/arch/arm/configs/at91sam9260_defconfig @@ -33,12 +33,10 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_MACB=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set @@ -55,7 +53,6 @@ CONFIG_I2C_GPIO=y CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_AT91SAM9X_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set # CONFIG_USB_HID is not set CONFIG_USB=y CONFIG_USB_DEVICEFS=y @@ -71,7 +68,6 @@ CONFIG_USB_G_SERIAL=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_CRAMFS=y diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig index 9e90e6d..23966c6 100644 --- a/arch/arm/configs/at91sam9g20_defconfig +++ b/arch/arm/configs/at91sam9g20_defconfig @@ -23,7 +23,6 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" CONFIG_FPE_NWFPE=y -CONFIG_PM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -37,8 +36,6 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -48,17 +45,13 @@ CONFIG_MTD_NAND_ATMEL=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 @@ -66,15 +59,14 @@ CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set +CONFIG_LEGACY_PTY_COUNT=16 CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=16 CONFIG_HW_RANDOM=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y CONFIG_SPI_SPIDEV=y # CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SEQUENCER=y @@ -82,7 +74,6 @@ CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_VERBOSE_PROCFS is not set -CONFIG_SND_AT73C213=y CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set @@ -105,7 +96,6 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig index c5876d2..7f8f999 100644 --- a/arch/arm/configs/at91sam9g45_defconfig +++ b/arch/arm/configs/at91sam9g45_defconfig @@ -73,11 +73,8 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y CONFIG_MII=y -CONFIG_DAVICOM_PHY=y -CONFIG_NET_ETHERNET=y CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +CONFIG_DAVICOM_PHY=y CONFIG_LIBERTAS_THINFIRM=m CONFIG_LIBERTAS_THINFIRM_USB=m CONFIG_AT76C50X_USB=m @@ -131,7 +128,6 @@ CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y # CONFIG_HWMON is not set -# CONFIG_MFD_SUPPORT is not set CONFIG_FB=y CONFIG_FB_ATMEL=y CONFIG_FB_UDL=m diff --git a/arch/arm/configs/at91sam9rl_defconfig b/arch/arm/configs/at91sam9rl_defconfig index 75621e4..ad562ee 100644 --- a/arch/arm/configs/at91sam9rl_defconfig +++ b/arch/arm/configs/at91sam9rl_defconfig @@ -23,8 +23,6 @@ CONFIG_NET=y CONFIG_UNIX=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -35,7 +33,6 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=4 CONFIG_BLK_DEV_RAM_SIZE=24576 -CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y @@ -62,13 +59,11 @@ CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_FB=y CONFIG_FB_ATMEL=y -# CONFIG_VGA_CONSOLE is not set CONFIG_MMC=y CONFIG_MMC_AT91=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y -- cgit v0.10.2 From db5509f0c2b7e7c02e1294a10a4d4b04f2720c28 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 16 Oct 2011 00:03:17 +0800 Subject: ARM: at91: enable additional boards in existing soc defconfig files Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre Signed-off-by: Arnd Bergmann diff --git a/arch/arm/configs/at91sam9260_defconfig b/arch/arm/configs/at91sam9260_defconfig index 8a4c22d..505b376 100644 --- a/arch/arm/configs/at91sam9260_defconfig +++ b/arch/arm/configs/at91sam9260_defconfig @@ -12,11 +12,23 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91SAM9260=y +CONFIG_ARCH_AT91SAM9260_SAM9XE=y CONFIG_MACH_AT91SAM9260EK=y +CONFIG_MACH_CAM60=y +CONFIG_MACH_SAM9_L9260=y +CONFIG_MACH_AFEB9260=y +CONFIG_MACH_USB_A9260=y +CONFIG_MACH_QIL_A9260=y +CONFIG_MACH_CPU9260=y +CONFIG_MACH_FLEXIBITY=y +CONFIG_MACH_SNAPPER_9260=y +CONFIG_MACH_AT91SAM_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # CONFIG_ARM_THUMB is not set CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" CONFIG_FPE_NWFPE=y CONFIG_NET=y diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig index 23966c6..9123568 100644 --- a/arch/arm/configs/at91sam9g20_defconfig +++ b/arch/arm/configs/at91sam9g20_defconfig @@ -14,6 +14,15 @@ CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91SAM9G20=y CONFIG_MACH_AT91SAM9G20EK=y CONFIG_MACH_AT91SAM9G20EK_2MMC=y +CONFIG_MACH_CPU9G20=y +CONFIG_MACH_ACMENETUSFOXG20=y +CONFIG_MACH_PORTUXG20=y +CONFIG_MACH_STAMP9G20=y +CONFIG_MACH_PCONTROL_G20=y +CONFIG_MACH_GSIA18S=y +CONFIG_MACH_USB_A9G20=y +CONFIG_MACH_SNAPPER_9260=y +CONFIG_MACH_AT91SAM_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # CONFIG_ARM_THUMB is not set CONFIG_AEABI=y @@ -21,6 +30,8 @@ CONFIG_LEDS=y CONFIG_LEDS_CPU=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" CONFIG_FPE_NWFPE=y CONFIG_NET=y diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig index 7f8f999..606d48f 100644 --- a/arch/arm/configs/at91sam9g45_defconfig +++ b/arch/arm/configs/at91sam9g45_defconfig @@ -18,6 +18,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91SAM9G45=y CONFIG_MACH_AT91SAM9M10G45EK=y +CONFIG_MACH_AT91SAM_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y CONFIG_AT91_SLOW_CLOCK=y CONFIG_AEABI=y -- cgit v0.10.2 From 884a45d964dd395eda945842afff5e16bcaedf56 Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Tue, 22 Nov 2011 07:44:47 -0800 Subject: cgroup_freezer: fix freezing groups with stopped tasks 2d3cbf8b (cgroup_freezer: update_freezer_state() does incorrect state transitions) removed is_task_frozen_enough and replaced it with a simple frozen call. This, however, breaks freezing for a group with stopped tasks because those cannot be frozen and so the group remains in CGROUP_FREEZING state (update_if_frozen doesn't count stopped tasks) and never reaches CGROUP_FROZEN. Let's add is_task_frozen_enough back and use it at the original locations (update_if_frozen and try_to_freeze_cgroup). Semantically we consider stopped tasks as frozen enough so we should consider both cases when testing frozen tasks. Testcase: mkdir /dev/freezer mount -t cgroup -o freezer none /dev/freezer mkdir /dev/freezer/foo sleep 1h & pid=$! kill -STOP $pid echo $pid > /dev/freezer/foo/tasks echo FROZEN > /dev/freezer/foo/freezer.state while true do cat /dev/freezer/foo/freezer.state [ "`cat /dev/freezer/foo/freezer.state`" = "FROZEN" ] && break sleep 1 done echo OK Signed-off-by: Michal Hocko Acked-by: Li Zefan Cc: Tomasz Buchert Cc: Paul Menage Cc: Andrew Morton Cc: stable@kernel.org Signed-off-by: Tejun Heo diff --git a/kernel/cgroup_freezer.c b/kernel/cgroup_freezer.c index 5e828a2..213c035 100644 --- a/kernel/cgroup_freezer.c +++ b/kernel/cgroup_freezer.c @@ -153,6 +153,13 @@ static void freezer_destroy(struct cgroup_subsys *ss, kfree(cgroup_freezer(cgroup)); } +/* task is frozen or will freeze immediately when next it gets woken */ +static bool is_task_frozen_enough(struct task_struct *task) +{ + return frozen(task) || + (task_is_stopped_or_traced(task) && freezing(task)); +} + /* * The call to cgroup_lock() in the freezer.state write method prevents * a write to that file racing against an attach, and hence the @@ -231,7 +238,7 @@ static void update_if_frozen(struct cgroup *cgroup, cgroup_iter_start(cgroup, &it); while ((task = cgroup_iter_next(cgroup, &it))) { ntotal++; - if (frozen(task)) + if (is_task_frozen_enough(task)) nfrozen++; } @@ -284,7 +291,7 @@ static int try_to_freeze_cgroup(struct cgroup *cgroup, struct freezer *freezer) while ((task = cgroup_iter_next(cgroup, &it))) { if (!freeze_task(task, true)) continue; - if (frozen(task)) + if (is_task_frozen_enough(task)) continue; if (!freezing(task) && !freezer_should_skip(task)) num_cant_freeze_now++; -- cgit v0.10.2 From 13020be8be2d5843c3810169cdbcc51f07ff020f Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 24 Nov 2011 09:40:07 +0000 Subject: powerpc: Fix compiliation with hugetlbfs enabled arch/powerpc/mm/hugetlbpage.c: In function 'reserve_hugetlb_gpages': arch/powerpc/mm/hugetlbpage.c:312:2: error: implicit declaration of function 'parse_args' Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 5964371..8558b57 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include -- cgit v0.10.2 From 49e44064d7e3f24f874a51dd513b83ef9994aa8a Mon Sep 17 00:00:00 2001 From: Tony Breeds Date: Tue, 22 Nov 2011 13:50:46 +0000 Subject: powerpc/44x: Add mtd ndfc to the ppx44x defconfig Signed-off-by: Tony Breeds Acked-by: Josh Boyer Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig index 6cdf1c0..3b98d73 100644 --- a/arch/powerpc/configs/ppc44x_defconfig +++ b/arch/powerpc/configs/ppc44x_defconfig @@ -52,6 +52,8 @@ CONFIG_MTD_CFI=y CONFIG_MTD_JEDECPROBE=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_NAND=m +CONFIG_MTD_NAND_NDFC=m CONFIG_MTD_UBI=m CONFIG_MTD_UBI_GLUEBI=m CONFIG_PROC_DEVICETREE=y -- cgit v0.10.2 From 4c81f045c0bd2cbb78cc6446a4cd98038fe11a2e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 24 Nov 2011 19:22:24 -0500 Subject: ext4: fix racy use-after-free in ext4_end_io_dio() ext4_end_io_dio() queues io_end->work and then clears iocb->private; however, io_end->work calls aio_complete() which frees the iocb object. If that slab object gets reallocated, then ext4_end_io_dio() can end up clearing someone else's iocb->private, this use-after-free can cause a leak of a struct ext4_io_end_t structure. Detected and tested with slab poisoning. [ Note: Can also reproduce using 12 fio's against 12 file systems with the following configuration file: [global] direct=1 ioengine=libaio iodepth=1 bs=4k ba=4k size=128m [create] filename=${TESTDIR} rw=write -- tytso ] Google-Bug-Id: 5354697 Signed-off-by: Tejun Heo Signed-off-by: "Theodore Ts'o" Reported-by: Kent Overstreet Tested-by: Kent Overstreet Cc: stable@kernel.org diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index fffec40..848f436 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2807,8 +2807,8 @@ out: spin_unlock_irqrestore(&ei->i_completed_io_lock, flags); /* queue the work to convert unwritten extents to written */ - queue_work(wq, &io_end->work); iocb->private = NULL; + queue_work(wq, &io_end->work); /* XXX: probably should move into the real I/O completion handler */ inode_dio_done(inode); -- cgit v0.10.2 From b52fabca369f433999837b73031bdd34feb6fca2 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Thu, 24 Nov 2011 10:29:14 -0500 Subject: hwmon: Remove redundant spi driver bus initialization In ancient times it was necessary to manually initialize the bus field of an spi_driver to spi_bus_type. These days this is done in spi_register_driver(), so we can drop the manual assignment. The patch was generated using the following coccinelle semantic patch: // @@ identifier _driver; @@ struct spi_driver _driver = { .driver = { - .bus = &spi_bus_type, }, }; // Signed-off-by: Lars-Peter Clausen Cc: Jean Delvare Cc: Guenter Roeck Cc: lm-sensors@lm-sensors.org Signed-off-by: Guenter Roeck diff --git a/drivers/hwmon/ad7314.c b/drivers/hwmon/ad7314.c index 318e38e..5d760f3 100644 --- a/drivers/hwmon/ad7314.c +++ b/drivers/hwmon/ad7314.c @@ -160,7 +160,6 @@ MODULE_DEVICE_TABLE(spi, ad7314_id); static struct spi_driver ad7314_driver = { .driver = { .name = "ad7314", - .bus = &spi_bus_type, .owner = THIS_MODULE, }, .probe = ad7314_probe, diff --git a/drivers/hwmon/ads7871.c b/drivers/hwmon/ads7871.c index 5231934..04450f8 100644 --- a/drivers/hwmon/ads7871.c +++ b/drivers/hwmon/ads7871.c @@ -227,7 +227,6 @@ static int __devexit ads7871_remove(struct spi_device *spi) static struct spi_driver ads7871_driver = { .driver = { .name = DEVICE_NAME, - .bus = &spi_bus_type, .owner = THIS_MODULE, }, -- cgit v0.10.2 From 25a236a5dba47a16affb105525cfd75eaa03ceea Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 25 Nov 2011 02:31:00 -0500 Subject: hwmon: convert drivers/hwmon/* to use module_platform_driver() This patch converts the drivers in drivers/hwmon/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: Donggeun Kim Cc: Simon Guinot Cc: Lars-Peter Clausen Cc: MyungJoo Ham Cc: Ben Dooks Cc: Hans de Goede Cc: J Keerthy Cc: David S. Miller Cc: Mark Brown Signed-off-by: Axel Lin Acked-by: Mark Brown Signed-off-by: Guenter Roeck diff --git a/drivers/hwmon/exynos4_tmu.c b/drivers/hwmon/exynos4_tmu.c index faa0884..f2359a0 100644 --- a/drivers/hwmon/exynos4_tmu.c +++ b/drivers/hwmon/exynos4_tmu.c @@ -506,17 +506,7 @@ static struct platform_driver exynos4_tmu_driver = { .resume = exynos4_tmu_resume, }; -static int __init exynos4_tmu_driver_init(void) -{ - return platform_driver_register(&exynos4_tmu_driver); -} -module_init(exynos4_tmu_driver_init); - -static void __exit exynos4_tmu_driver_exit(void) -{ - platform_driver_unregister(&exynos4_tmu_driver); -} -module_exit(exynos4_tmu_driver_exit); +module_platform_driver(exynos4_tmu_driver); MODULE_DESCRIPTION("EXYNOS4 TMU Driver"); MODULE_AUTHOR("Donggeun Kim "); diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c index 89aa9fb..9ba38f3 100644 --- a/drivers/hwmon/gpio-fan.c +++ b/drivers/hwmon/gpio-fan.c @@ -539,18 +539,7 @@ static struct platform_driver gpio_fan_driver = { }, }; -static int __init gpio_fan_init(void) -{ - return platform_driver_register(&gpio_fan_driver); -} - -static void __exit gpio_fan_exit(void) -{ - platform_driver_unregister(&gpio_fan_driver); -} - -module_init(gpio_fan_init); -module_exit(gpio_fan_exit); +module_platform_driver(gpio_fan_driver); MODULE_AUTHOR("Simon Guinot "); MODULE_DESCRIPTION("GPIO FAN driver"); diff --git a/drivers/hwmon/jz4740-hwmon.c b/drivers/hwmon/jz4740-hwmon.c index fea292d..7a48b1e 100644 --- a/drivers/hwmon/jz4740-hwmon.c +++ b/drivers/hwmon/jz4740-hwmon.c @@ -212,17 +212,7 @@ struct platform_driver jz4740_hwmon_driver = { }, }; -static int __init jz4740_hwmon_init(void) -{ - return platform_driver_register(&jz4740_hwmon_driver); -} -module_init(jz4740_hwmon_init); - -static void __exit jz4740_hwmon_exit(void) -{ - platform_driver_unregister(&jz4740_hwmon_driver); -} -module_exit(jz4740_hwmon_exit); +module_platform_driver(jz4740_hwmon_driver); MODULE_DESCRIPTION("JZ4740 SoC HWMON driver"); MODULE_AUTHOR("Lars-Peter Clausen "); diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c index eab1161..9b382ec 100644 --- a/drivers/hwmon/ntc_thermistor.c +++ b/drivers/hwmon/ntc_thermistor.c @@ -432,19 +432,7 @@ static struct platform_driver ntc_thermistor_driver = { .id_table = ntc_thermistor_id, }; -static int __init ntc_thermistor_init(void) -{ - return platform_driver_register(&ntc_thermistor_driver); -} - -module_init(ntc_thermistor_init); - -static void __exit ntc_thermistor_cleanup(void) -{ - platform_driver_unregister(&ntc_thermistor_driver); -} - -module_exit(ntc_thermistor_cleanup); +module_platform_driver(ntc_thermistor_driver); MODULE_DESCRIPTION("NTC Thermistor Driver"); MODULE_AUTHOR("MyungJoo Ham "); diff --git a/drivers/hwmon/s3c-hwmon.c b/drivers/hwmon/s3c-hwmon.c index b39f52e..f6c26d1 100644 --- a/drivers/hwmon/s3c-hwmon.c +++ b/drivers/hwmon/s3c-hwmon.c @@ -393,18 +393,7 @@ static struct platform_driver s3c_hwmon_driver = { .remove = __devexit_p(s3c_hwmon_remove), }; -static int __init s3c_hwmon_init(void) -{ - return platform_driver_register(&s3c_hwmon_driver); -} - -static void __exit s3c_hwmon_exit(void) -{ - platform_driver_unregister(&s3c_hwmon_driver); -} - -module_init(s3c_hwmon_init); -module_exit(s3c_hwmon_exit); +module_platform_driver(s3c_hwmon_driver); MODULE_AUTHOR("Ben Dooks "); MODULE_DESCRIPTION("S3C ADC HWMon driver"); diff --git a/drivers/hwmon/sch5627.c b/drivers/hwmon/sch5627.c index e3b5c60..79b6dab 100644 --- a/drivers/hwmon/sch5627.c +++ b/drivers/hwmon/sch5627.c @@ -590,19 +590,8 @@ static struct platform_driver sch5627_driver = { .remove = sch5627_remove, }; -static int __init sch5627_init(void) -{ - return platform_driver_register(&sch5627_driver); -} - -static void __exit sch5627_exit(void) -{ - platform_driver_unregister(&sch5627_driver); -} +module_platform_driver(sch5627_driver); MODULE_DESCRIPTION("SMSC SCH5627 Hardware Monitoring Driver"); MODULE_AUTHOR("Hans de Goede "); MODULE_LICENSE("GPL"); - -module_init(sch5627_init); -module_exit(sch5627_exit); diff --git a/drivers/hwmon/sch5636.c b/drivers/hwmon/sch5636.c index 244407a..9d5236f 100644 --- a/drivers/hwmon/sch5636.c +++ b/drivers/hwmon/sch5636.c @@ -521,19 +521,8 @@ static struct platform_driver sch5636_driver = { .remove = sch5636_remove, }; -static int __init sch5636_init(void) -{ - return platform_driver_register(&sch5636_driver); -} - -static void __exit sch5636_exit(void) -{ - platform_driver_unregister(&sch5636_driver); -} +module_platform_driver(sch5636_driver); MODULE_DESCRIPTION("SMSC SCH5636 Hardware Monitoring Driver"); MODULE_AUTHOR("Hans de Goede "); MODULE_LICENSE("GPL"); - -module_init(sch5636_init); -module_exit(sch5636_exit); diff --git a/drivers/hwmon/twl4030-madc-hwmon.c b/drivers/hwmon/twl4030-madc-hwmon.c index 5724074..0018c7d 100644 --- a/drivers/hwmon/twl4030-madc-hwmon.c +++ b/drivers/hwmon/twl4030-madc-hwmon.c @@ -136,19 +136,7 @@ static struct platform_driver twl4030_madc_hwmon_driver = { }, }; -static int __init twl4030_madc_hwmon_init(void) -{ - return platform_driver_register(&twl4030_madc_hwmon_driver); -} - -module_init(twl4030_madc_hwmon_init); - -static void __exit twl4030_madc_hwmon_exit(void) -{ - platform_driver_unregister(&twl4030_madc_hwmon_driver); -} - -module_exit(twl4030_madc_hwmon_exit); +module_platform_driver(twl4030_madc_hwmon_driver); MODULE_DESCRIPTION("TWL4030 ADC Hwmon driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/ultra45_env.c b/drivers/hwmon/ultra45_env.c index 3cd07bf..b9a87e8 100644 --- a/drivers/hwmon/ultra45_env.c +++ b/drivers/hwmon/ultra45_env.c @@ -309,15 +309,4 @@ static struct platform_driver env_driver = { .remove = __devexit_p(env_remove), }; -static int __init env_init(void) -{ - return platform_driver_register(&env_driver); -} - -static void __exit env_exit(void) -{ - platform_driver_unregister(&env_driver); -} - -module_init(env_init); -module_exit(env_exit); +module_platform_driver(env_driver); diff --git a/drivers/hwmon/wm831x-hwmon.c b/drivers/hwmon/wm831x-hwmon.c index 97b1f83..9b598ed 100644 --- a/drivers/hwmon/wm831x-hwmon.c +++ b/drivers/hwmon/wm831x-hwmon.c @@ -209,17 +209,7 @@ static struct platform_driver wm831x_hwmon_driver = { }, }; -static int __init wm831x_hwmon_init(void) -{ - return platform_driver_register(&wm831x_hwmon_driver); -} -module_init(wm831x_hwmon_init); - -static void __exit wm831x_hwmon_exit(void) -{ - platform_driver_unregister(&wm831x_hwmon_driver); -} -module_exit(wm831x_hwmon_exit); +module_platform_driver(wm831x_hwmon_driver); MODULE_AUTHOR("Mark Brown "); MODULE_DESCRIPTION("WM831x Hardware Monitoring"); diff --git a/drivers/hwmon/wm8350-hwmon.c b/drivers/hwmon/wm8350-hwmon.c index 1329059..3ff67ed 100644 --- a/drivers/hwmon/wm8350-hwmon.c +++ b/drivers/hwmon/wm8350-hwmon.c @@ -133,17 +133,7 @@ static struct platform_driver wm8350_hwmon_driver = { }, }; -static int __init wm8350_hwmon_init(void) -{ - return platform_driver_register(&wm8350_hwmon_driver); -} -module_init(wm8350_hwmon_init); - -static void __exit wm8350_hwmon_exit(void) -{ - platform_driver_unregister(&wm8350_hwmon_driver); -} -module_exit(wm8350_hwmon_exit); +module_platform_driver(wm8350_hwmon_driver); MODULE_AUTHOR("Mark Brown "); MODULE_DESCRIPTION("WM8350 Hardware Monitoring"); -- cgit v0.10.2 From 8a6e77d5209e459a9ec5c268c39800c06cd1dc86 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 21 Nov 2011 00:21:55 +0000 Subject: decnet: proper socket refcounting Better use sk_reset_timer() / sk_stop_timer() helpers to make sure we dont access already freed/reused memory later. Reported-by: Sasha Levin Signed-off-by: Eric Dumazet Tested-by: Sasha Levin Signed-off-by: David S. Miller diff --git a/net/decnet/dn_timer.c b/net/decnet/dn_timer.c index 67f691b..d9c150c 100644 --- a/net/decnet/dn_timer.c +++ b/net/decnet/dn_timer.c @@ -36,16 +36,13 @@ static void dn_slow_timer(unsigned long arg); void dn_start_slow_timer(struct sock *sk) { - sk->sk_timer.expires = jiffies + SLOW_INTERVAL; - sk->sk_timer.function = dn_slow_timer; - sk->sk_timer.data = (unsigned long)sk; - - add_timer(&sk->sk_timer); + setup_timer(&sk->sk_timer, dn_slow_timer, (unsigned long)sk); + sk_reset_timer(sk, &sk->sk_timer, jiffies + SLOW_INTERVAL); } void dn_stop_slow_timer(struct sock *sk) { - del_timer(&sk->sk_timer); + sk_stop_timer(sk, &sk->sk_timer); } static void dn_slow_timer(unsigned long arg) @@ -53,12 +50,10 @@ static void dn_slow_timer(unsigned long arg) struct sock *sk = (struct sock *)arg; struct dn_scp *scp = DN_SK(sk); - sock_hold(sk); bh_lock_sock(sk); if (sock_owned_by_user(sk)) { - sk->sk_timer.expires = jiffies + HZ / 10; - add_timer(&sk->sk_timer); + sk_reset_timer(sk, &sk->sk_timer, jiffies + HZ / 10); goto out; } @@ -100,9 +95,7 @@ static void dn_slow_timer(unsigned long arg) scp->keepalive_fxn(sk); } - sk->sk_timer.expires = jiffies + SLOW_INTERVAL; - - add_timer(&sk->sk_timer); + sk_reset_timer(sk, &sk->sk_timer, jiffies + SLOW_INTERVAL); out: bh_unlock_sock(sk); sock_put(sk); -- cgit v0.10.2 From 71b1391a41289735676be02e35239e5aa9fe6ba6 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 25 Nov 2011 06:47:16 +0000 Subject: l2tp: ensure sk->dst is still valid When using l2tp over ipsec, the tunnel will hang when rekeying occurs. Reason is that the transformer bundle attached to the dst entry is now in STATE_DEAD and thus xfrm_output_one() drops all packets (XfrmOutStateExpired increases). Fix this by calling __sk_dst_check (which drops the stale dst if xfrm dst->check callback finds that the bundle is no longer valid). Cc: James Chapman Signed-off-by: Florian Westphal Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c index cf0f308..89ff8c6 100644 --- a/net/l2tp/l2tp_core.c +++ b/net/l2tp/l2tp_core.c @@ -1072,7 +1072,7 @@ int l2tp_xmit_skb(struct l2tp_session *session, struct sk_buff *skb, int hdr_len /* Get routing info from the tunnel socket */ skb_dst_drop(skb); - skb_dst_set(skb, dst_clone(__sk_dst_get(sk))); + skb_dst_set(skb, dst_clone(__sk_dst_check(sk, 0))); inet = inet_sk(sk); fl = &inet->cork.fl; -- cgit v0.10.2 From 83b98fb46ff136945f9d06a9bf6e6aae2ffc37b3 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 21 Nov 2011 07:51:56 +0000 Subject: dm9000: Fix check for disabled wake on LAN We're trying to check if any options are defined which isn't wha the existing code does due to confusing & and &&. Signed-off-by: Mark Brown Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index 438f458..2a22f52 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -613,7 +613,7 @@ static int dm9000_set_wol(struct net_device *dev, struct ethtool_wolinfo *w) if (!dm->wake_state) irq_set_irq_wake(dm->irq_wake, 1); - else if (dm->wake_state & !opts) + else if (dm->wake_state && !opts) irq_set_irq_wake(dm->irq_wake, 0); } -- cgit v0.10.2 From aaa0b4f00729d5530b7d983930e60255574b347b Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Fri, 25 Nov 2011 10:56:22 +0000 Subject: iio: iio_event_getfd -- fix ev_int build failure Fix build failure in staging iio driver: .../drivers/staging/iio/industrialio-core.c: In function 'iio_event_getfd': .../drivers/staging/iio/industrialio-core.c:262:32: error: 'ev_int' undeclared (first use in this function) Also convert the rest of the function to use the new variable. Signed-off-by: Andy Whitcroft Signed-off-by: Linus Torvalds diff --git a/drivers/staging/iio/industrialio-core.c b/drivers/staging/iio/industrialio-core.c index 2656409..aec9311 100644 --- a/drivers/staging/iio/industrialio-core.c +++ b/drivers/staging/iio/industrialio-core.c @@ -242,25 +242,24 @@ static const struct file_operations iio_event_chrdev_fileops = { static int iio_event_getfd(struct iio_dev *indio_dev) { + struct iio_event_interface *ev_int = indio_dev->event_interface; int fd; - if (indio_dev->event_interface == NULL) + if (ev_int == NULL) return -ENODEV; - mutex_lock(&indio_dev->event_interface->event_list_lock); - if (test_and_set_bit(IIO_BUSY_BIT_POS, - &indio_dev->event_interface->flags)) { - mutex_unlock(&indio_dev->event_interface->event_list_lock); + mutex_lock(&ev_int->event_list_lock); + if (test_and_set_bit(IIO_BUSY_BIT_POS, &ev_int->flags)) { + mutex_unlock(&ev_int->event_list_lock); return -EBUSY; } - mutex_unlock(&indio_dev->event_interface->event_list_lock); + mutex_unlock(&ev_int->event_list_lock); fd = anon_inode_getfd("iio:event", - &iio_event_chrdev_fileops, - indio_dev->event_interface, O_RDONLY); + &iio_event_chrdev_fileops, ev_int, O_RDONLY); if (fd < 0) { - mutex_lock(&indio_dev->event_interface->event_list_lock); + mutex_lock(&ev_int->event_list_lock); clear_bit(IIO_BUSY_BIT_POS, &ev_int->flags); - mutex_unlock(&indio_dev->event_interface->event_list_lock); + mutex_unlock(&ev_int->event_list_lock); } return fd; } -- cgit v0.10.2 From 0884d7aa24e15e72b3c07f7da910a13bb7df3592 Mon Sep 17 00:00:00 2001 From: Alexey Moiseytsev Date: Mon, 21 Nov 2011 13:35:25 +0000 Subject: AF_UNIX: Fix poll blocking problem when reading from a stream socket poll() call may be blocked by concurrent reading from the same stream socket. Signed-off-by: Alexey Moiseytsev Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 466fbcc..b595a3d 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -1957,6 +1957,7 @@ static int unix_stream_recvmsg(struct kiocb *iocb, struct socket *sock, if ((UNIXCB(skb).pid != siocb->scm->pid) || (UNIXCB(skb).cred != siocb->scm->cred)) { skb_queue_head(&sk->sk_receive_queue, skb); + sk->sk_data_ready(sk, skb->len); break; } } else { @@ -1974,6 +1975,7 @@ static int unix_stream_recvmsg(struct kiocb *iocb, struct socket *sock, chunk = min_t(unsigned int, skb->len, size); if (memcpy_toiovec(msg->msg_iov, skb->data, chunk)) { skb_queue_head(&sk->sk_receive_queue, skb); + sk->sk_data_ready(sk, skb->len); if (copied == 0) copied = -EFAULT; break; @@ -1991,6 +1993,7 @@ static int unix_stream_recvmsg(struct kiocb *iocb, struct socket *sock, /* put the skb back if we didn't use it up.. */ if (skb->len) { skb_queue_head(&sk->sk_receive_queue, skb); + sk->sk_data_ready(sk, skb->len); break; } @@ -2006,6 +2009,7 @@ static int unix_stream_recvmsg(struct kiocb *iocb, struct socket *sock, /* put message back and return */ skb_queue_head(&sk->sk_receive_queue, skb); + sk->sk_data_ready(sk, skb->len); break; } } while (size); -- cgit v0.10.2 From 41dfaa934c5d866d626de9bea785e6168524a47e Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 22 Nov 2011 04:01:06 +0100 Subject: ARM: 7168/1: use cache type functions for arch_get_unmapped_area There are already cache type decoding functions, so use those instead of custom decode code which only works for ARMv6. Signed-off-by: Rob Herring Acked-by: Nicolas Pitre Acked-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index 74be05f..44b628e 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -9,8 +9,7 @@ #include #include #include -#include -#include +#include #define COLOUR_ALIGN(addr,pgoff) \ ((((addr)+SHMLBA-1)&~(SHMLBA-1)) + \ @@ -32,25 +31,15 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, struct mm_struct *mm = current->mm; struct vm_area_struct *vma; unsigned long start_addr; -#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) - unsigned int cache_type; - int do_align = 0, aliasing = 0; + int do_align = 0; + int aliasing = cache_is_vipt_aliasing(); /* * We only need to do colour alignment if either the I or D - * caches alias. This is indicated by bits 9 and 21 of the - * cache type register. + * caches alias. */ - cache_type = read_cpuid_cachetype(); - if (cache_type != read_cpuid_id()) { - aliasing = (cache_type | cache_type >> 12) & (1 << 11); - if (aliasing) - do_align = filp || flags & MAP_SHARED; - } -#else -#define do_align 0 -#define aliasing 0 -#endif + if (aliasing) + do_align = filp || (flags & MAP_SHARED); /* * We enforce the MAP_FIXED case. -- cgit v0.10.2 From c89cefed35c8c5f53f36757f8a6768e390394ee3 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 22 Nov 2011 23:42:12 +0100 Subject: ARM: 7170/2: fix compilation breakage in entry-armv.S Fix compilation failure, when Thumb support is not enabled: arch/arm/kernel/entry-armv.S: Assembler messages: arch/arm/kernel/entry-armv.S:501: Error: backward ref to unknown label "2:" arch/arm/kernel/entry-armv.S:502: Error: backward ref to unknown label "3:" make[2]: *** [arch/arm/kernel/entry-armv.o] Error 1 Signed-off-by: Guennadi Liakhovetski Reviewed-by: Dave Martin Signed-off-by: Russell King diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 9ad50c4..b145f16 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -497,7 +497,7 @@ ENDPROC(__und_usr) .popsection .pushsection __ex_table,"a" .long 1b, 4b -#if __LINUX_ARM_ARCH__ >= 7 +#if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7 .long 2b, 4b .long 3b, 4b #endif -- cgit v0.10.2 From c36ef4b1762302a493c6cb754073bded084700e2 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 23 Nov 2011 11:28:25 +0100 Subject: ARM: 7171/1: unwind: add unwind directives to bitops assembly macros The bitops functions (e.g. _test_and_set_bit) on ARM do not have unwind annotations and therefore the kernel cannot backtrace out of them on a fatal error (for example, NULL pointer dereference). This patch annotates the bitops assembly macros with UNWIND annotations so that we can produce a meaningful backtrace on error. Callers of the macros are modified to pass their function name as a macro parameter, enforcing that the macros are used as standalone function implementations. Acked-by: Dave Martin Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h index 10d868a..d6408d1 100644 --- a/arch/arm/lib/bitops.h +++ b/arch/arm/lib/bitops.h @@ -1,5 +1,9 @@ +#include + #if __LINUX_ARM_ARCH__ >= 6 - .macro bitop, instr + .macro bitop, name, instr +ENTRY( \name ) +UNWIND( .fnstart ) ands ip, r1, #3 strneb r1, [ip] @ assert word-aligned mov r2, #1 @@ -13,9 +17,13 @@ cmp r0, #0 bne 1b bx lr +UNWIND( .fnend ) +ENDPROC(\name ) .endm - .macro testop, instr, store + .macro testop, name, instr, store +ENTRY( \name ) +UNWIND( .fnstart ) ands ip, r1, #3 strneb r1, [ip] @ assert word-aligned mov r2, #1 @@ -34,9 +42,13 @@ cmp r0, #0 movne r0, #1 2: bx lr +UNWIND( .fnend ) +ENDPROC(\name ) .endm #else - .macro bitop, instr + .macro bitop, name, instr +ENTRY( \name ) +UNWIND( .fnstart ) ands ip, r1, #3 strneb r1, [ip] @ assert word-aligned and r2, r0, #31 @@ -49,6 +61,8 @@ str r2, [r1, r0, lsl #2] restore_irqs ip mov pc, lr +UNWIND( .fnend ) +ENDPROC(\name ) .endm /** @@ -59,7 +73,9 @@ * Note: we can trivially conditionalise the store instruction * to avoid dirtying the data cache. */ - .macro testop, instr, store + .macro testop, name, instr, store +ENTRY( \name ) +UNWIND( .fnstart ) ands ip, r1, #3 strneb r1, [ip] @ assert word-aligned and r3, r0, #31 @@ -73,5 +89,7 @@ moveq r0, #0 restore_irqs ip mov pc, lr +UNWIND( .fnend ) +ENDPROC(\name ) .endm #endif diff --git a/arch/arm/lib/changebit.S b/arch/arm/lib/changebit.S index 68ed5b6..f402786 100644 --- a/arch/arm/lib/changebit.S +++ b/arch/arm/lib/changebit.S @@ -12,6 +12,4 @@ #include "bitops.h" .text -ENTRY(_change_bit) - bitop eor -ENDPROC(_change_bit) +bitop _change_bit, eor diff --git a/arch/arm/lib/clearbit.S b/arch/arm/lib/clearbit.S index 4c04c3b..f6b75fb 100644 --- a/arch/arm/lib/clearbit.S +++ b/arch/arm/lib/clearbit.S @@ -12,6 +12,4 @@ #include "bitops.h" .text -ENTRY(_clear_bit) - bitop bic -ENDPROC(_clear_bit) +bitop _clear_bit, bic diff --git a/arch/arm/lib/setbit.S b/arch/arm/lib/setbit.S index bbee5c6..618feda 100644 --- a/arch/arm/lib/setbit.S +++ b/arch/arm/lib/setbit.S @@ -12,6 +12,4 @@ #include "bitops.h" .text -ENTRY(_set_bit) - bitop orr -ENDPROC(_set_bit) +bitop _set_bit, orr diff --git a/arch/arm/lib/testchangebit.S b/arch/arm/lib/testchangebit.S index 15a4d43..4becdc3 100644 --- a/arch/arm/lib/testchangebit.S +++ b/arch/arm/lib/testchangebit.S @@ -12,6 +12,4 @@ #include "bitops.h" .text -ENTRY(_test_and_change_bit) - testop eor, str -ENDPROC(_test_and_change_bit) +testop _test_and_change_bit, eor, str diff --git a/arch/arm/lib/testclearbit.S b/arch/arm/lib/testclearbit.S index 521b66b..918841d 100644 --- a/arch/arm/lib/testclearbit.S +++ b/arch/arm/lib/testclearbit.S @@ -12,6 +12,4 @@ #include "bitops.h" .text -ENTRY(_test_and_clear_bit) - testop bicne, strne -ENDPROC(_test_and_clear_bit) +testop _test_and_clear_bit, bicne, strne diff --git a/arch/arm/lib/testsetbit.S b/arch/arm/lib/testsetbit.S index 1c98cc2..8d1b2fe 100644 --- a/arch/arm/lib/testsetbit.S +++ b/arch/arm/lib/testsetbit.S @@ -12,6 +12,4 @@ #include "bitops.h" .text -ENTRY(_test_and_set_bit) - testop orreq, streq -ENDPROC(_test_and_set_bit) +testop _test_and_set_bit, orreq, streq -- cgit v0.10.2 From ea2e7057c0234cfb8b09467d8f137760d371fc72 Mon Sep 17 00:00:00 2001 From: Sumit Bhattacharya Date: Thu, 24 Nov 2011 00:47:12 +0100 Subject: ARM: 7172/1: dma: Drop GFP_COMP for DMA memory allocations dma_alloc_coherent wants to split pages after allocation in order to reduce the memory footprint. This does not work well with GFP_COMP pages, so drop this flag before allocation. This patch is ported from arch/avr32 (commit 3611553ef985ef7c5863c8a94641738addd04cff). [swarren: s/HUGETLB_PAGE/HUGETLBFS/ in comment, minor comment cleanup] Signed-off-by: Sumit Bhattacharya Tested-by: Varun Colbert Signed-off-by: Stephen Warren Signed-off-by: Russell King diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index ab58456..1aa664a 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -332,6 +332,15 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, struct page *page; void *addr; + /* + * Following is a work-around (a.k.a. hack) to prevent pages + * with __GFP_COMP being passed to split_page() which cannot + * handle them. The real problem is that this flag probably + * should be 0 on ARM as it is not supported on this + * platform; see CONFIG_HUGETLBFS. + */ + gfp &= ~(__GFP_COMP); + *handle = ~0; size = PAGE_ALIGN(size); -- cgit v0.10.2 From 46589e2922509f9134ce79fa75180886c9765c58 Mon Sep 17 00:00:00 2001 From: Jon Medhurst Date: Thu, 24 Nov 2011 13:01:08 +0100 Subject: ARM: 7174/1: Fix build error in kprobes test code on Thumb2 kernels When compiling kprobes-test-thumb.c an error like below may occur: /tmp/ccKcuJcG.s:19179: Error: offset out of range This is caused by the compiler underestimating the size of the inline assembler instructions containing ".space 0x1000" and failing to spill the literal pool in time to prevent the generation of PC relative load instruction with invalid offsets. The fix implemented by this patch is to replace a single large .space directive by a number of 4 byte .space's. This requires splitting the macros which generate test cases for branch instructions into two forms: one with, and one without support for inserting extra code between branch and target. Acked-by: Nicolas Pitre Signed-off-by: Jon Medhurst Signed-off-by: Russell King diff --git a/arch/arm/kernel/kprobes-test-thumb.c b/arch/arm/kernel/kprobes-test-thumb.c index 5e726c3..5d8b857 100644 --- a/arch/arm/kernel/kprobes-test-thumb.c +++ b/arch/arm/kernel/kprobes-test-thumb.c @@ -222,8 +222,8 @@ void kprobe_thumb16_test_cases(void) DONT_TEST_IN_ITBLOCK( TEST_BF_R( "cbnz r",0,0, ", 2f") TEST_BF_R( "cbz r",2,-1,", 2f") - TEST_BF_RX( "cbnz r",4,1, ", 2f",0x20) - TEST_BF_RX( "cbz r",7,0, ", 2f",0x40) + TEST_BF_RX( "cbnz r",4,1, ", 2f", SPACE_0x20) + TEST_BF_RX( "cbz r",7,0, ", 2f", SPACE_0x40) ) TEST_R("sxth r0, r",7, HH1,"") TEST_R("sxth r7, r",0, HH2,"") @@ -246,7 +246,7 @@ DONT_TEST_IN_ITBLOCK( TESTCASE_START(code) \ TEST_ARG_PTR(13, offset) \ TEST_ARG_END("") \ - TEST_BRANCH_F(code,0) \ + TEST_BRANCH_F(code) \ TESTCASE_END TEST("push {r0}") @@ -319,8 +319,8 @@ CONDITION_INSTRUCTIONS(8, TEST_BF( "b 2f") TEST_BB( "b 2b") - TEST_BF_X("b 2f", 0x400) - TEST_BB_X("b 2b", 0x400) + TEST_BF_X("b 2f", SPACE_0x400) + TEST_BB_X("b 2b", SPACE_0x400) TEST_GROUP("Testing instructions in IT blocks") @@ -746,7 +746,7 @@ CONDITION_INSTRUCTIONS(22, TEST_BB("bne.w 2b") TEST_BF("bgt.w 2f") TEST_BB("blt.w 2b") - TEST_BF_X("bpl.w 2f",0x1000) + TEST_BF_X("bpl.w 2f", SPACE_0x1000) ) TEST_UNSUPPORTED("msr cpsr, r0") @@ -786,11 +786,11 @@ CONDITION_INSTRUCTIONS(22, TEST_BF( "b.w 2f") TEST_BB( "b.w 2b") - TEST_BF_X("b.w 2f", 0x1000) + TEST_BF_X("b.w 2f", SPACE_0x1000) TEST_BF( "bl.w 2f") TEST_BB( "bl.w 2b") - TEST_BB_X("bl.w 2b", 0x1000) + TEST_BB_X("bl.w 2b", SPACE_0x1000) TEST_X( "blx __dummy_arm_subroutine", ".arm \n\t" diff --git a/arch/arm/kernel/kprobes-test.h b/arch/arm/kernel/kprobes-test.h index 0dc5d77..e28a869 100644 --- a/arch/arm/kernel/kprobes-test.h +++ b/arch/arm/kernel/kprobes-test.h @@ -149,23 +149,31 @@ struct test_arg_end { "1: "instruction" \n\t" \ " nop \n\t" -#define TEST_BRANCH_F(instruction, xtra_dist) \ +#define TEST_BRANCH_F(instruction) \ TEST_INSTRUCTION(instruction) \ - ".if "#xtra_dist" \n\t" \ " b 99f \n\t" \ - ".space "#xtra_dist" \n\t" \ - ".endif \n\t" \ + "2: nop \n\t" + +#define TEST_BRANCH_B(instruction) \ + " b 50f \n\t" \ + " b 99f \n\t" \ + "2: nop \n\t" \ + " b 99f \n\t" \ + TEST_INSTRUCTION(instruction) + +#define TEST_BRANCH_FX(instruction, codex) \ + TEST_INSTRUCTION(instruction) \ + " b 99f \n\t" \ + codex" \n\t" \ " b 99f \n\t" \ "2: nop \n\t" -#define TEST_BRANCH_B(instruction, xtra_dist) \ +#define TEST_BRANCH_BX(instruction, codex) \ " b 50f \n\t" \ " b 99f \n\t" \ "2: nop \n\t" \ " b 99f \n\t" \ - ".if "#xtra_dist" \n\t" \ - ".space "#xtra_dist" \n\t" \ - ".endif \n\t" \ + codex" \n\t" \ TEST_INSTRUCTION(instruction) #define TESTCASE_END \ @@ -301,47 +309,60 @@ struct test_arg_end { TESTCASE_START(code1 #reg1 code2) \ TEST_ARG_PTR(reg1, val1) \ TEST_ARG_END("") \ - TEST_BRANCH_F(code1 #reg1 code2, 0) \ + TEST_BRANCH_F(code1 #reg1 code2) \ TESTCASE_END -#define TEST_BF_X(code, xtra_dist) \ +#define TEST_BF(code) \ TESTCASE_START(code) \ TEST_ARG_END("") \ - TEST_BRANCH_F(code, xtra_dist) \ + TEST_BRANCH_F(code) \ TESTCASE_END -#define TEST_BB_X(code, xtra_dist) \ +#define TEST_BB(code) \ TESTCASE_START(code) \ TEST_ARG_END("") \ - TEST_BRANCH_B(code, xtra_dist) \ + TEST_BRANCH_B(code) \ TESTCASE_END -#define TEST_BF_RX(code1, reg, val, code2, xtra_dist) \ - TESTCASE_START(code1 #reg code2) \ - TEST_ARG_REG(reg, val) \ - TEST_ARG_END("") \ - TEST_BRANCH_F(code1 #reg code2, xtra_dist) \ +#define TEST_BF_R(code1, reg, val, code2) \ + TESTCASE_START(code1 #reg code2) \ + TEST_ARG_REG(reg, val) \ + TEST_ARG_END("") \ + TEST_BRANCH_F(code1 #reg code2) \ TESTCASE_END -#define TEST_BB_RX(code1, reg, val, code2, xtra_dist) \ - TESTCASE_START(code1 #reg code2) \ - TEST_ARG_REG(reg, val) \ - TEST_ARG_END("") \ - TEST_BRANCH_B(code1 #reg code2, xtra_dist) \ +#define TEST_BB_R(code1, reg, val, code2) \ + TESTCASE_START(code1 #reg code2) \ + TEST_ARG_REG(reg, val) \ + TEST_ARG_END("") \ + TEST_BRANCH_B(code1 #reg code2) \ TESTCASE_END -#define TEST_BF(code) TEST_BF_X(code, 0) -#define TEST_BB(code) TEST_BB_X(code, 0) - -#define TEST_BF_R(code1, reg, val, code2) TEST_BF_RX(code1, reg, val, code2, 0) -#define TEST_BB_R(code1, reg, val, code2) TEST_BB_RX(code1, reg, val, code2, 0) - #define TEST_BF_RR(code1, reg1, val1, code2, reg2, val2, code3) \ TESTCASE_START(code1 #reg1 code2 #reg2 code3) \ TEST_ARG_REG(reg1, val1) \ TEST_ARG_REG(reg2, val2) \ TEST_ARG_END("") \ - TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3, 0) \ + TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3) \ + TESTCASE_END + +#define TEST_BF_X(code, codex) \ + TESTCASE_START(code) \ + TEST_ARG_END("") \ + TEST_BRANCH_FX(code, codex) \ + TESTCASE_END + +#define TEST_BB_X(code, codex) \ + TESTCASE_START(code) \ + TEST_ARG_END("") \ + TEST_BRANCH_BX(code, codex) \ + TESTCASE_END + +#define TEST_BF_RX(code1, reg, val, code2, codex) \ + TESTCASE_START(code1 #reg code2) \ + TEST_ARG_REG(reg, val) \ + TEST_ARG_END("") \ + TEST_BRANCH_FX(code1 #reg code2, codex) \ TESTCASE_END #define TEST_X(code, codex) \ @@ -372,6 +393,25 @@ struct test_arg_end { TESTCASE_END +/* + * Macros for defining space directives spread over multiple lines. + * These are required so the compiler guesses better the length of inline asm + * code and will spill the literal pool early enough to avoid generating PC + * relative loads with out of range offsets. + */ +#define TWICE(x) x x +#define SPACE_0x8 TWICE(".space 4\n\t") +#define SPACE_0x10 TWICE(SPACE_0x8) +#define SPACE_0x20 TWICE(SPACE_0x10) +#define SPACE_0x40 TWICE(SPACE_0x20) +#define SPACE_0x80 TWICE(SPACE_0x40) +#define SPACE_0x100 TWICE(SPACE_0x80) +#define SPACE_0x200 TWICE(SPACE_0x100) +#define SPACE_0x400 TWICE(SPACE_0x200) +#define SPACE_0x800 TWICE(SPACE_0x400) +#define SPACE_0x1000 TWICE(SPACE_0x800) + + /* Various values used in test cases... */ #define N(val) (val ^ 0xffffffff) #define VAL1 0x12345678 -- cgit v0.10.2 From 97371fa99c1900a84a5220639edd726b35d73931 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 25 Nov 2011 00:23:28 +0100 Subject: ARM: 7175/1: add subname parameter to mfp_set_groupg callers commit 798681bf "ARM: 7158/1: add new MFP implement for NUC900" adds subname parameter for mfp_set_groupg. Thus add subname parameter to the callers. Signed-off-by: Axel Lin Acked-by: Mark Brown Acked-by: Wan Zongshun Signed-off-by: Russell King diff --git a/drivers/i2c/busses/i2c-nuc900.c b/drivers/i2c/busses/i2c-nuc900.c index 835e47b..03b6157 100644 --- a/drivers/i2c/busses/i2c-nuc900.c +++ b/drivers/i2c/busses/i2c-nuc900.c @@ -593,7 +593,7 @@ static int __devinit nuc900_i2c_probe(struct platform_device *pdev) i2c->adap.algo_data = i2c; i2c->adap.dev.parent = &pdev->dev; - mfp_set_groupg(&pdev->dev); + mfp_set_groupg(&pdev->dev, NULL); clk_get_rate(i2c->clk); diff --git a/drivers/spi/spi-nuc900.c b/drivers/spi/spi-nuc900.c index e763254..21c70b2 100644 --- a/drivers/spi/spi-nuc900.c +++ b/drivers/spi/spi-nuc900.c @@ -426,7 +426,7 @@ static int __devinit nuc900_spi_probe(struct platform_device *pdev) goto err_clk; } - mfp_set_groupg(&pdev->dev); + mfp_set_groupg(&pdev->dev, NULL); nuc900_init_spi(hw); err = spi_bitbang_start(&hw->bitbang); diff --git a/sound/soc/nuc900/nuc900-ac97.c b/sound/soc/nuc900/nuc900-ac97.c index 9c0edad..a4e3237 100644 --- a/sound/soc/nuc900/nuc900-ac97.c +++ b/sound/soc/nuc900/nuc900-ac97.c @@ -365,7 +365,8 @@ static int __devinit nuc900_ac97_drvprobe(struct platform_device *pdev) if (ret) goto out3; - mfp_set_groupg(nuc900_audio->dev); /* enbale ac97 multifunction pin*/ + /* enbale ac97 multifunction pin */ + mfp_set_groupg(nuc900_audio->dev, "nuc900-audio"); return 0; -- cgit v0.10.2 From abdd7b91dab2f8b2e32e90e4b7e809ffb462a662 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 25 Nov 2011 17:58:19 +0100 Subject: ARM: 7176/1: cpu_pm: register GIC PM notifier only once When multiple GICs exist on a platform (RealView PB1176/11MP), we must make sure the PM notifier block is only registered once, otherwise we end up corrupting the PM notifier list. The fix is to only register the notifier when initializing the first GIC, as the power management functions seem to iterate over all the registered GICs. Tested on PB11MP and PB1176. Reported-by: Will Deacon Tested-by: Will Deacon Cc: Colin Cross Signed-off-by: Marc Zyngier Signed-off-by: Russell King diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 0e6ae47..43240f3 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -526,7 +526,8 @@ static void __init gic_pm_init(struct gic_chip_data *gic) sizeof(u32)); BUG_ON(!gic->saved_ppi_conf); - cpu_pm_register_notifier(&gic_notifier_block); + if (gic == &gic_data[0]) + cpu_pm_register_notifier(&gic_notifier_block); } #else static void __init gic_pm_init(struct gic_chip_data *gic) -- cgit v0.10.2 From fe41db7b3aca512e19b8ef4fbd5ad55545005d25 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 25 Nov 2011 19:23:36 +0100 Subject: ARM: 7177/1: GIC: avoid skipping non-existent PPIs in irq_start calculation Commit 4294f8baa ("ARM: gic: add irq_domain support") defines irq_start as irq_start = (irq_start & ~31) + 16; On a platform with a GIC and a CPU without PPIs, this results in irq_start being off by 16. This patch fixes gic_init so that we only carve out a PPI space when PPIs exist for the GIC being initialised. Cc: Rob Herring Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 43240f3..410a546 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -582,13 +582,16 @@ void __init gic_init(unsigned int gic_nr, int irq_start, * For primary GICs, skip over SGIs. * For secondary GICs, skip over PPIs, too. */ + domain->hwirq_base = 32; if (gic_nr == 0) { gic_cpu_base_addr = cpu_base; - domain->hwirq_base = 16; - if (irq_start > 0) - irq_start = (irq_start & ~31) + 16; - } else - domain->hwirq_base = 32; + + if ((irq_start & 31) > 0) { + domain->hwirq_base = 16; + if (irq_start != -1) + irq_start = (irq_start & ~31) + 16; + } + } /* * Find out how many interrupts are supported. -- cgit v0.10.2 From de68dca1816660b0d3ac89fa59ffb410007a143f Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 26 Nov 2011 12:13:44 +0000 Subject: inet: add a redirect generation id in inetpeer MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Now inetpeer is the place where we cache redirect information for ipv4 destinations, we must be able to invalidate informations when a route is added/removed on host. As inetpeer is not yet namespace aware, this patch adds a shared redirect_genid, and a per inetpeer redirect_genid. This might be changed later if inetpeer becomes ns aware. Cache information for one inerpeer is valid as long as its redirect_genid has the same value than global redirect_genid. Reported-by: Arkadiusz Miśkiewicz Tested-by: Arkadiusz Miśkiewicz Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/include/net/inetpeer.h b/include/net/inetpeer.h index 78c83e6..e9ff3fc 100644 --- a/include/net/inetpeer.h +++ b/include/net/inetpeer.h @@ -35,6 +35,7 @@ struct inet_peer { u32 metrics[RTAX_MAX]; u32 rate_tokens; /* rate limiting for ICMP */ + int redirect_genid; unsigned long rate_last; unsigned long pmtu_expires; u32 pmtu_orig; diff --git a/net/ipv4/route.c b/net/ipv4/route.c index fb47c8f..5c28472 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -131,6 +131,7 @@ static int ip_rt_mtu_expires __read_mostly = 10 * 60 * HZ; static int ip_rt_min_pmtu __read_mostly = 512 + 20 + 20; static int ip_rt_min_advmss __read_mostly = 256; static int rt_chain_length_max __read_mostly = 20; +static int redirect_genid; /* * Interface to generic destination cache. @@ -837,6 +838,7 @@ static void rt_cache_invalidate(struct net *net) get_random_bytes(&shuffle, sizeof(shuffle)); atomic_add(shuffle + 1U, &net->ipv4.rt_genid); + redirect_genid++; } /* @@ -1391,8 +1393,10 @@ void ip_rt_redirect(__be32 old_gw, __be32 daddr, __be32 new_gw, peer = rt->peer; if (peer) { - if (peer->redirect_learned.a4 != new_gw) { + if (peer->redirect_learned.a4 != new_gw || + peer->redirect_genid != redirect_genid) { peer->redirect_learned.a4 = new_gw; + peer->redirect_genid = redirect_genid; atomic_inc(&__rt_peer_genid); } check_peer_redir(&rt->dst, peer); @@ -1701,6 +1705,8 @@ static struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie) if (peer) { check_peer_pmtu(dst, peer); + if (peer->redirect_genid != redirect_genid) + peer->redirect_learned.a4 = 0; if (peer->redirect_learned.a4 && peer->redirect_learned.a4 != rt->rt_gateway) { if (check_peer_redir(dst, peer)) @@ -1857,6 +1863,8 @@ static void rt_init_metrics(struct rtable *rt, const struct flowi4 *fl4, dst_init_metrics(&rt->dst, peer->metrics, false); check_peer_pmtu(&rt->dst, peer); + if (peer->redirect_genid != redirect_genid) + peer->redirect_learned.a4 = 0; if (peer->redirect_learned.a4 && peer->redirect_learned.a4 != rt->rt_gateway) { rt->rt_gateway = peer->redirect_learned.a4; -- cgit v0.10.2 From 92bb43e6aae3dbdb199feba93da5f2d05d7716d0 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 24 Nov 2011 14:48:24 +0300 Subject: ALSA: hda - cut and paste typo in cs420x_models[] The CS420X_IMAC27 was copied from the line before but CS420X_APPLE was clearly intented. Signed-off-by: Dan Carpenter Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c index 7bd2a52..70a7abd 100644 --- a/sound/pci/hda/patch_cirrus.c +++ b/sound/pci/hda/patch_cirrus.c @@ -1278,7 +1278,7 @@ static const char * const cs420x_models[CS420X_MODELS] = { [CS420X_MBP53] = "mbp53", [CS420X_MBP55] = "mbp55", [CS420X_IMAC27] = "imac27", - [CS420X_IMAC27] = "apple", + [CS420X_APPLE] = "apple", [CS420X_AUTO] = "auto", }; -- cgit v0.10.2 From 187d333edc0a8e1bb507900ce89853ffe3bd2c84 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 24 Nov 2011 16:33:09 +0100 Subject: ALSA: hda - Fix jack-detection control of VT1708 VT1708 has no support for unsolicited events per jack-plug, the driver implements the workq for polling the jack-detection. The mixer element "Jack Detect" was supposed to control this behavior on/off, but this doesn't work properly as is now. The workq is always started and the HP automute is always enabled. This patch fixes the jack-detect control behavior by triggering / stopping the work appropriately at the state change. Also the work checks the internal state to continue scheduling or not. Cc: [v3.1] Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c index 431c0d4..b513762 100644 --- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -208,6 +208,7 @@ struct via_spec { /* work to check hp jack state */ struct hda_codec *codec; struct delayed_work vt1708_hp_work; + int hp_work_active; int vt1708_jack_detect; int vt1708_hp_present; @@ -305,27 +306,35 @@ enum { static void analog_low_current_mode(struct hda_codec *codec); static bool is_aa_path_mute(struct hda_codec *codec); -static void vt1708_start_hp_work(struct via_spec *spec) +#define hp_detect_with_aa(codec) \ + (snd_hda_get_bool_hint(codec, "analog_loopback_hp_detect") == 1 && \ + !is_aa_path_mute(codec)) + +static void vt1708_stop_hp_work(struct via_spec *spec) { if (spec->codec_type != VT1708 || spec->autocfg.hp_pins[0] == 0) return; - snd_hda_codec_write(spec->codec, 0x1, 0, 0xf81, - !spec->vt1708_jack_detect); - if (!delayed_work_pending(&spec->vt1708_hp_work)) - schedule_delayed_work(&spec->vt1708_hp_work, - msecs_to_jiffies(100)); + if (spec->hp_work_active) { + snd_hda_codec_write(spec->codec, 0x1, 0, 0xf81, 1); + cancel_delayed_work_sync(&spec->vt1708_hp_work); + spec->hp_work_active = 0; + } } -static void vt1708_stop_hp_work(struct via_spec *spec) +static void vt1708_update_hp_work(struct via_spec *spec) { if (spec->codec_type != VT1708 || spec->autocfg.hp_pins[0] == 0) return; - if (snd_hda_get_bool_hint(spec->codec, "analog_loopback_hp_detect") == 1 - && !is_aa_path_mute(spec->codec)) - return; - snd_hda_codec_write(spec->codec, 0x1, 0, 0xf81, - !spec->vt1708_jack_detect); - cancel_delayed_work_sync(&spec->vt1708_hp_work); + if (spec->vt1708_jack_detect && + (spec->active_streams || hp_detect_with_aa(spec->codec))) { + if (!spec->hp_work_active) { + snd_hda_codec_write(spec->codec, 0x1, 0, 0xf81, 0); + schedule_delayed_work(&spec->vt1708_hp_work, + msecs_to_jiffies(100)); + spec->hp_work_active = 1; + } + } else if (!hp_detect_with_aa(spec->codec)) + vt1708_stop_hp_work(spec); } static void set_widgets_power_state(struct hda_codec *codec) @@ -343,12 +352,7 @@ static int analog_input_switch_put(struct snd_kcontrol *kcontrol, set_widgets_power_state(codec); analog_low_current_mode(snd_kcontrol_chip(kcontrol)); - if (snd_hda_get_bool_hint(codec, "analog_loopback_hp_detect") == 1) { - if (is_aa_path_mute(codec)) - vt1708_start_hp_work(codec->spec); - else - vt1708_stop_hp_work(codec->spec); - } + vt1708_update_hp_work(codec->spec); return change; } @@ -1154,7 +1158,7 @@ static int via_playback_multi_pcm_prepare(struct hda_pcm_stream *hinfo, spec->cur_dac_stream_tag = stream_tag; spec->cur_dac_format = format; mutex_unlock(&spec->config_mutex); - vt1708_start_hp_work(spec); + vt1708_update_hp_work(spec); return 0; } @@ -1174,7 +1178,7 @@ static int via_playback_hp_pcm_prepare(struct hda_pcm_stream *hinfo, spec->cur_hp_stream_tag = stream_tag; spec->cur_hp_format = format; mutex_unlock(&spec->config_mutex); - vt1708_start_hp_work(spec); + vt1708_update_hp_work(spec); return 0; } @@ -1188,7 +1192,7 @@ static int via_playback_multi_pcm_cleanup(struct hda_pcm_stream *hinfo, snd_hda_multi_out_analog_cleanup(codec, &spec->multiout); spec->active_streams &= ~STREAM_MULTI_OUT; mutex_unlock(&spec->config_mutex); - vt1708_stop_hp_work(spec); + vt1708_update_hp_work(spec); return 0; } @@ -1203,7 +1207,7 @@ static int via_playback_hp_pcm_cleanup(struct hda_pcm_stream *hinfo, snd_hda_codec_setup_stream(codec, spec->hp_dac_nid, 0, 0, 0); spec->active_streams &= ~STREAM_INDEP_HP; mutex_unlock(&spec->config_mutex); - vt1708_stop_hp_work(spec); + vt1708_update_hp_work(spec); return 0; } @@ -1645,7 +1649,8 @@ static void via_hp_automute(struct hda_codec *codec) int nums; struct via_spec *spec = codec->spec; - if (!spec->hp_independent_mode && spec->autocfg.hp_pins[0]) + if (!spec->hp_independent_mode && spec->autocfg.hp_pins[0] && + (spec->codec_type != VT1708 || spec->vt1708_jack_detect)) present = snd_hda_jack_detect(codec, spec->autocfg.hp_pins[0]); if (spec->smart51_enabled) @@ -2612,8 +2617,6 @@ static int vt1708_jack_detect_get(struct snd_kcontrol *kcontrol, if (spec->codec_type != VT1708) return 0; - spec->vt1708_jack_detect = - !((snd_hda_codec_read(codec, 0x1, 0, 0xf84, 0) >> 8) & 0x1); ucontrol->value.integer.value[0] = spec->vt1708_jack_detect; return 0; } @@ -2623,18 +2626,22 @@ static int vt1708_jack_detect_put(struct snd_kcontrol *kcontrol, { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct via_spec *spec = codec->spec; - int change; + int val; if (spec->codec_type != VT1708) return 0; - spec->vt1708_jack_detect = ucontrol->value.integer.value[0]; - change = (0x1 & (snd_hda_codec_read(codec, 0x1, 0, 0xf84, 0) >> 8)) - == !spec->vt1708_jack_detect; - if (spec->vt1708_jack_detect) { + val = !!ucontrol->value.integer.value[0]; + if (spec->vt1708_jack_detect == val) + return 0; + spec->vt1708_jack_detect = val; + if (spec->vt1708_jack_detect && + snd_hda_get_bool_hint(codec, "analog_loopback_hp_detect") != 1) { mute_aa_path(codec, 1); notify_aa_path_ctls(codec); } - return change; + via_hp_automute(codec); + vt1708_update_hp_work(spec); + return 1; } static const struct snd_kcontrol_new vt1708_jack_detect_ctl = { @@ -2771,6 +2778,7 @@ static int via_init(struct hda_codec *codec) via_auto_init_unsol_event(codec); via_hp_automute(codec); + vt1708_update_hp_work(spec); return 0; } @@ -2787,7 +2795,9 @@ static void vt1708_update_hp_jack_state(struct work_struct *work) spec->vt1708_hp_present ^= 1; via_hp_automute(spec->codec); } - vt1708_start_hp_work(spec); + if (spec->vt1708_jack_detect) + schedule_delayed_work(&spec->vt1708_hp_work, + msecs_to_jiffies(100)); } static int get_mux_nids(struct hda_codec *codec) -- cgit v0.10.2 From 06718f151144aa5eea97cdf2813fe7eb70e73d17 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 26 Nov 2011 23:37:43 +0100 Subject: ath9k: Revert change that broke AR928X on Acer Ferrari One Revert a hunk in drivers/net/wireless/ath/ath9k/hw.c introduced by commit 2577c6e8f232 ("ath9k_hw: Add support for AR946/8x chipsets") that caused a nasty regression to appear on my Acer Ferrari One (the box locks up entirely at random times after the wireless has been started without any way to get debug information out of it). Signed-off-by: Rafael J. Wysocki Acked-by: Felix Fietkau Signed-off-by: Linus Torvalds diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 2f91acc..8873c6e 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1827,7 +1827,8 @@ static void ath9k_set_power_sleep(struct ath_hw *ah, int setChip) } /* Clear Bit 14 of AR_WA after putting chip into Full Sleep mode. */ - REG_WRITE(ah, AR_WA, ah->WARegVal & ~AR_WA_D3_L1_DISABLE); + if (AR_SREV_9300_20_OR_LATER(ah)) + REG_WRITE(ah, AR_WA, ah->WARegVal & ~AR_WA_D3_L1_DISABLE); } /* -- cgit v0.10.2 From c4860ba2e11261a541632ceee8267ca490d9eb98 Mon Sep 17 00:00:00 2001 From: Aries Lee Date: Mon, 21 Nov 2011 10:20:42 +0000 Subject: jme: PHY configuration for compatible issue To perform PHY calibration and set a different EA value by chip ID, Whenever the NIC chip power on, ie booting or resuming, we need to force HW to calibrate PHY parameter again, and also set a proper EA value which gather from experiment. Those procedures help to reduce compatible issues(NIC is unable to link up in some special case) in giga speed. Signed-off-by: AriesLee Signed-off-by: Guo-Fu Tseng Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/jme.c b/drivers/net/ethernet/jme.c index 7becff1..76b8457 100644 --- a/drivers/net/ethernet/jme.c +++ b/drivers/net/ethernet/jme.c @@ -1745,6 +1745,112 @@ jme_phy_off(struct jme_adapter *jme) } static int +jme_phy_specreg_read(struct jme_adapter *jme, u32 specreg) +{ + u32 phy_addr; + + phy_addr = JM_PHY_SPEC_REG_READ | specreg; + jme_mdio_write(jme->dev, jme->mii_if.phy_id, JM_PHY_SPEC_ADDR_REG, + phy_addr); + return jme_mdio_read(jme->dev, jme->mii_if.phy_id, + JM_PHY_SPEC_DATA_REG); +} + +static void +jme_phy_specreg_write(struct jme_adapter *jme, u32 ext_reg, u32 phy_data) +{ + u32 phy_addr; + + phy_addr = JM_PHY_SPEC_REG_WRITE | ext_reg; + jme_mdio_write(jme->dev, jme->mii_if.phy_id, JM_PHY_SPEC_DATA_REG, + phy_data); + jme_mdio_write(jme->dev, jme->mii_if.phy_id, JM_PHY_SPEC_ADDR_REG, + phy_addr); +} + +static int +jme_phy_calibration(struct jme_adapter *jme) +{ + u32 ctrl1000, phy_data; + + jme_phy_off(jme); + jme_phy_on(jme); + /* Enabel PHY test mode 1 */ + ctrl1000 = jme_mdio_read(jme->dev, jme->mii_if.phy_id, MII_CTRL1000); + ctrl1000 &= ~PHY_GAD_TEST_MODE_MSK; + ctrl1000 |= PHY_GAD_TEST_MODE_1; + jme_mdio_write(jme->dev, jme->mii_if.phy_id, MII_CTRL1000, ctrl1000); + + phy_data = jme_phy_specreg_read(jme, JM_PHY_EXT_COMM_2_REG); + phy_data &= ~JM_PHY_EXT_COMM_2_CALI_MODE_0; + phy_data |= JM_PHY_EXT_COMM_2_CALI_LATCH | + JM_PHY_EXT_COMM_2_CALI_ENABLE; + jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_2_REG, phy_data); + msleep(20); + phy_data = jme_phy_specreg_read(jme, JM_PHY_EXT_COMM_2_REG); + phy_data &= ~(JM_PHY_EXT_COMM_2_CALI_ENABLE | + JM_PHY_EXT_COMM_2_CALI_MODE_0 | + JM_PHY_EXT_COMM_2_CALI_LATCH); + jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_2_REG, phy_data); + + /* Disable PHY test mode */ + ctrl1000 = jme_mdio_read(jme->dev, jme->mii_if.phy_id, MII_CTRL1000); + ctrl1000 &= ~PHY_GAD_TEST_MODE_MSK; + jme_mdio_write(jme->dev, jme->mii_if.phy_id, MII_CTRL1000, ctrl1000); + return 0; +} + +static int +jme_phy_setEA(struct jme_adapter *jme) +{ + u32 phy_comm0 = 0, phy_comm1 = 0; + u8 nic_ctrl; + + pci_read_config_byte(jme->pdev, PCI_PRIV_SHARE_NICCTRL, &nic_ctrl); + if ((nic_ctrl & 0x3) == JME_FLAG_PHYEA_ENABLE) + return 0; + + switch (jme->pdev->device) { + case PCI_DEVICE_ID_JMICRON_JMC250: + if (((jme->chip_main_rev == 5) && + ((jme->chip_sub_rev == 0) || (jme->chip_sub_rev == 1) || + (jme->chip_sub_rev == 3))) || + (jme->chip_main_rev >= 6)) { + phy_comm0 = 0x008A; + phy_comm1 = 0x4109; + } + if ((jme->chip_main_rev == 3) && + ((jme->chip_sub_rev == 1) || (jme->chip_sub_rev == 2))) + phy_comm0 = 0xE088; + break; + case PCI_DEVICE_ID_JMICRON_JMC260: + if (((jme->chip_main_rev == 5) && + ((jme->chip_sub_rev == 0) || (jme->chip_sub_rev == 1) || + (jme->chip_sub_rev == 3))) || + (jme->chip_main_rev >= 6)) { + phy_comm0 = 0x008A; + phy_comm1 = 0x4109; + } + if ((jme->chip_main_rev == 3) && + ((jme->chip_sub_rev == 1) || (jme->chip_sub_rev == 2))) + phy_comm0 = 0xE088; + if ((jme->chip_main_rev == 2) && (jme->chip_sub_rev == 0)) + phy_comm0 = 0x608A; + if ((jme->chip_main_rev == 2) && (jme->chip_sub_rev == 2)) + phy_comm0 = 0x408A; + break; + default: + return -ENODEV; + } + if (phy_comm0) + jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_0_REG, phy_comm0); + if (phy_comm1) + jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_1_REG, phy_comm1); + + return 0; +} + +static int jme_open(struct net_device *netdev) { struct jme_adapter *jme = netdev_priv(netdev); @@ -1769,7 +1875,8 @@ jme_open(struct net_device *netdev) jme_set_settings(netdev, &jme->old_ecmd); else jme_reset_phy_processor(jme); - + jme_phy_calibration(jme); + jme_phy_setEA(jme); jme_reset_link(jme); return 0; @@ -3184,7 +3291,8 @@ jme_resume(struct device *dev) jme_set_settings(netdev, &jme->old_ecmd); else jme_reset_phy_processor(jme); - + jme_phy_calibration(jme); + jme_phy_setEA(jme); jme_start_irq(jme); netif_device_attach(netdev); @@ -3239,4 +3347,3 @@ MODULE_DESCRIPTION("JMicron JMC2x0 PCI Express Ethernet driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); MODULE_DEVICE_TABLE(pci, jme_pci_tbl); - diff --git a/drivers/net/ethernet/jme.h b/drivers/net/ethernet/jme.h index 02ea27c..4304072 100644 --- a/drivers/net/ethernet/jme.h +++ b/drivers/net/ethernet/jme.h @@ -760,6 +760,25 @@ enum jme_rxmcs_bits { RXMCS_CHECKSUM, }; +/* Extern PHY common register 2 */ + +#define PHY_GAD_TEST_MODE_1 0x00002000 +#define PHY_GAD_TEST_MODE_MSK 0x0000E000 +#define JM_PHY_SPEC_REG_READ 0x00004000 +#define JM_PHY_SPEC_REG_WRITE 0x00008000 +#define PHY_CALIBRATION_DELAY 20 +#define JM_PHY_SPEC_ADDR_REG 0x1E +#define JM_PHY_SPEC_DATA_REG 0x1F + +#define JM_PHY_EXT_COMM_0_REG 0x30 +#define JM_PHY_EXT_COMM_1_REG 0x31 +#define JM_PHY_EXT_COMM_2_REG 0x32 +#define JM_PHY_EXT_COMM_2_CALI_ENABLE 0x01 +#define JM_PHY_EXT_COMM_2_CALI_MODE_0 0x02 +#define JM_PHY_EXT_COMM_2_CALI_LATCH 0x10 +#define PCI_PRIV_SHARE_NICCTRL 0xF5 +#define JME_FLAG_PHYEA_ENABLE 0x2 + /* * Wakeup Frame setup interface registers */ -- cgit v0.10.2 From d4d6373c1109b11c8118340be97ae31b8f94d66a Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 28 Nov 2011 14:06:31 +0800 Subject: regulator: aat2870: Fix the logic of checking if no id is matched in aat2870_get_regulator In current implementation, the pointer ri is not NULL if no id is matched. Fix it by checking i == ARRAY_SIZE(aat2870_regulators) if no id is matched. Signed-off-by: Axel Lin Signed-off-by: Mark Brown Cc: stable@kernel.org diff --git a/drivers/regulator/aat2870-regulator.c b/drivers/regulator/aat2870-regulator.c index 5abeb3a..298c6c6 100644 --- a/drivers/regulator/aat2870-regulator.c +++ b/drivers/regulator/aat2870-regulator.c @@ -160,7 +160,7 @@ static struct aat2870_regulator *aat2870_get_regulator(int id) break; } - if (!ri) + if (i == ARRAY_SIZE(aat2870_regulators)) return NULL; ri->enable_addr = AAT2870_LDO_EN; -- cgit v0.10.2 From 58fb5cf5d1edb7e306574833ee55d732918c89e3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Date: Mon, 28 Nov 2011 15:38:37 +0100 Subject: regulator: fix use after free bug MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is caused by dereferencing 'rdev' after device_unregister() in the regulator_unregister() function. 'rdev' is freed by device_unregister(), so it must not be dereferenced after this call. [Edited commit message for legibility -- broonie] Signed-off-by: Lothar Waßmann Signed-off-by: Mark Brown diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 669d021..938398f 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2799,8 +2799,8 @@ void regulator_unregister(struct regulator_dev *rdev) list_del(&rdev->list); if (rdev->supply) regulator_put(rdev->supply); - device_unregister(&rdev->dev); kfree(rdev->constraints); + device_unregister(&rdev->dev); mutex_unlock(®ulator_list_mutex); } EXPORT_SYMBOL_GPL(regulator_unregister); -- cgit v0.10.2 From 52553ddffad76ccf192d4dd9ce88d5818f57f62a Mon Sep 17 00:00:00 2001 From: Edward Donovan Date: Sun, 27 Nov 2011 23:07:34 -0500 Subject: genirq: fix regression in irqfixup, irqpoll MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit fa27271bc8d2("genirq: Fixup poll handling") introduced a regression that broke irqfixup/irqpoll for some hardware configurations. Amidst reorganizing 'try_one_irq', that patch removed a test that checked for 'action->handler' returning IRQ_HANDLED, before acting on the interrupt. Restoring this test back returns the functionality lost since 2.6.39. In the current set of tests, after 'action' is set, it must precede '!action->next' to take effect. With this and my previous patch to irq/spurious.c, c75d720fca8a, all IRQ regressions that I have encountered are fixed. Signed-off-by: Edward Donovan Reported-and-tested-by: Rogério Brito Cc: Thomas Gleixner Cc: stable@kernel.org (2.6.39+) Signed-off-by: Linus Torvalds diff --git a/kernel/irq/spurious.c b/kernel/irq/spurious.c index b5f4742..dc813a9 100644 --- a/kernel/irq/spurious.c +++ b/kernel/irq/spurious.c @@ -84,7 +84,9 @@ static int try_one_irq(int irq, struct irq_desc *desc, bool force) */ action = desc->action; if (!action || !(action->flags & IRQF_SHARED) || - (action->flags & __IRQF_TIMER) || !action->next) + (action->flags & __IRQF_TIMER) || + (action->handler(irq, action->dev_id) == IRQ_HANDLED) || + !action->next) goto out; /* Already running on another processor */ -- cgit v0.10.2 From e007b857e88097c96c45620bf3b04a4e309053d1 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Thu, 24 Nov 2011 18:13:56 +0200 Subject: nl80211: fix MAC address validation MAC addresses have a fixed length. The current policy allows passing < ETH_ALEN bytes, which might result in reading beyond the buffer. Cc: stable@vger.kernel.org Signed-off-by: Eliad Peller Signed-off-by: John W. Linville diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index b3a476f..ffafda5 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -89,8 +89,8 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = { [NL80211_ATTR_IFINDEX] = { .type = NLA_U32 }, [NL80211_ATTR_IFNAME] = { .type = NLA_NUL_STRING, .len = IFNAMSIZ-1 }, - [NL80211_ATTR_MAC] = { .type = NLA_BINARY, .len = ETH_ALEN }, - [NL80211_ATTR_PREV_BSSID] = { .type = NLA_BINARY, .len = ETH_ALEN }, + [NL80211_ATTR_MAC] = { .len = ETH_ALEN }, + [NL80211_ATTR_PREV_BSSID] = { .len = ETH_ALEN }, [NL80211_ATTR_KEY] = { .type = NLA_NESTED, }, [NL80211_ATTR_KEY_DATA] = { .type = NLA_BINARY, -- cgit v0.10.2 From 24f50a9d165745fd0701c6e089d35f58a229ea69 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 24 Nov 2011 20:06:14 +0100 Subject: mac80211: don't stop a single aggregation session twice Nikolay noticed (by code review) that mac80211 can attempt to stop an aggregation session while it is already being stopped. So to fix it, check whether stop is already being done and bail out if so. Also move setting the STOPPING state into the lock so things are properly atomic. Cc: stable@vger.kernel.org Reported-by: Nikolay Martynov Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index 2ac0339..674b345 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -160,6 +160,12 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, return -ENOENT; } + /* if we're already stopping ignore any new requests to stop */ + if (test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) { + spin_unlock_bh(&sta->lock); + return -EALREADY; + } + if (test_bit(HT_AGG_STATE_WANT_START, &tid_tx->state)) { /* not even started yet! */ ieee80211_assign_tid_tx(sta, tid, NULL); @@ -168,6 +174,8 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, return 0; } + set_bit(HT_AGG_STATE_STOPPING, &tid_tx->state); + spin_unlock_bh(&sta->lock); #ifdef CONFIG_MAC80211_HT_DEBUG @@ -175,8 +183,6 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, sta->sta.addr, tid); #endif /* CONFIG_MAC80211_HT_DEBUG */ - set_bit(HT_AGG_STATE_STOPPING, &tid_tx->state); - del_timer_sync(&tid_tx->addba_resp_timer); /* -- cgit v0.10.2 From e55b32c110b025ce07b40227f620e99700bf8741 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Mon, 28 Nov 2011 10:33:40 +0100 Subject: rtlwifi: fix lps_lock deadlock rtl_lps_leave can be called from interrupt context, so we have to disable interrupts when taking lps_lock. Below is full lockdep info about deadlock: [ 93.815269] ================================= [ 93.815390] [ INFO: inconsistent lock state ] [ 93.815472] 2.6.41.1-3.offch.fc15.x86_64.debug #1 [ 93.815556] --------------------------------- [ 93.815635] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 93.815743] swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 93.815832] (&(&rtlpriv->locks.lps_lock)->rlock){+.?...}, at: [] rtl_lps_leave+0x26/0x103 [rtlwifi] [ 93.815947] {SOFTIRQ-ON-W} state was registered at: [ 93.815947] [] __lock_acquire+0x369/0xd0c [ 93.815947] [] lock_acquire+0xf3/0x13e [ 93.815947] [] _raw_spin_lock+0x45/0x79 [ 93.815947] [] rtl_swlps_rf_awake+0x5a/0x76 [rtlwifi] [ 93.815947] [] rtl_op_config+0x12a/0x32a [rtlwifi] [ 93.815947] [] ieee80211_hw_config+0x124/0x129 [mac80211] [ 93.815947] [] ieee80211_dynamic_ps_disable_work+0x32/0x47 [mac80211] [ 93.815947] [] process_one_work+0x205/0x3e7 [ 93.815947] [] worker_thread+0xda/0x15d [ 93.815947] [] kthread+0xa8/0xb0 [ 93.815947] [] kernel_thread_helper+0x4/0x10 [ 93.815947] irq event stamp: 547822 [ 93.815947] hardirqs last enabled at (547822): [] _raw_spin_unlock_irqrestore+0x45/0x61 [ 93.815947] hardirqs last disabled at (547821): [] _raw_spin_lock_irqsave+0x22/0x8e [ 93.815947] softirqs last enabled at (547790): [] _local_bh_enable+0x13/0x15 [ 93.815947] softirqs last disabled at (547791): [] call_softirq+0x1c/0x30 [ 93.815947] [ 93.815947] other info that might help us debug this: [ 93.815947] Possible unsafe locking scenario: [ 93.815947] [ 93.815947] CPU0 [ 93.815947] ---- [ 93.815947] lock(&(&rtlpriv->locks.lps_lock)->rlock); [ 93.815947] [ 93.815947] lock(&(&rtlpriv->locks.lps_lock)->rlock); [ 93.815947] [ 93.815947] *** DEADLOCK *** [ 93.815947] [ 93.815947] no locks held by swapper/0. [ 93.815947] [ 93.815947] stack backtrace: [ 93.815947] Pid: 0, comm: swapper Not tainted 2.6.41.1-3.offch.fc15.x86_64.debug #1 [ 93.815947] Call Trace: [ 93.815947] [] print_usage_bug+0x1e7/0x1f8 [ 93.815947] [] ? save_stack_trace+0x2c/0x49 [ 93.815947] [] ? print_irq_inversion_bug.part.18+0x1a0/0x1a0 [ 93.815947] [] mark_lock+0x106/0x220 [ 93.815947] [] __lock_acquire+0x2f5/0xd0c [ 93.815947] [] ? native_sched_clock+0x34/0x36 [ 93.830125] [] ? sched_clock+0x9/0xd [ 93.830125] [] ? sched_clock_local+0x12/0x75 [ 93.830125] [] ? rtl_lps_leave+0x26/0x103 [rtlwifi] [ 93.830125] [] lock_acquire+0xf3/0x13e [ 93.830125] [] ? rtl_lps_leave+0x26/0x103 [rtlwifi] [ 93.830125] [] _raw_spin_lock+0x45/0x79 [ 93.830125] [] ? rtl_lps_leave+0x26/0x103 [rtlwifi] [ 93.830125] [] ? skb_dequeue+0x62/0x6d [ 93.830125] [] rtl_lps_leave+0x26/0x103 [rtlwifi] [ 93.830125] [] _rtl_pci_ips_leave_tasklet+0xe/0x10 [rtlwifi] [ 93.830125] [] tasklet_action+0x8d/0xee [ 93.830125] [] __do_softirq+0x112/0x25a [ 93.830125] [] call_softirq+0x1c/0x30 [ 93.830125] [] do_softirq+0x4b/0xa1 [ 93.830125] [] irq_exit+0x5d/0xcf [ 93.830125] [] do_IRQ+0x8e/0xa5 [ 93.830125] [] common_interrupt+0x73/0x73 [ 93.830125] [] ? trace_hardirqs_off+0xd/0xf [ 93.830125] [] ? intel_idle+0xe5/0x10c [ 93.830125] [] ? intel_idle+0xe1/0x10c [ 93.830125] [] cpuidle_idle_call+0x11c/0x1fe [ 93.830125] [] cpu_idle+0xab/0x101 [ 93.830125] [] rest_init+0xd7/0xde [ 93.830125] [] ? csum_partial_copy_generic+0x16c/0x16c [ 93.830125] [] start_kernel+0x3dd/0x3ea [ 93.830125] [] x86_64_start_reservations+0xaf/0xb3 [ 93.830125] [] ? early_idt_handlers+0x140/0x140 [ 93.830125] [] x86_64_start_kernel+0x102/0x111 Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=755154 Reported-by: vjain02@students.poly.edu Reported-and-tested-by: Oliver Paukstadt Cc: stable@vger.kernel.org Acked-by: Larry Finger Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/ps.c b/drivers/net/wireless/rtlwifi/ps.c index a693fef..0b04b2e 100644 --- a/drivers/net/wireless/rtlwifi/ps.c +++ b/drivers/net/wireless/rtlwifi/ps.c @@ -394,7 +394,7 @@ void rtl_lps_enter(struct ieee80211_hw *hw) if (mac->link_state != MAC80211_LINKED) return; - spin_lock(&rtlpriv->locks.lps_lock); + spin_lock_irq(&rtlpriv->locks.lps_lock); /* Idle for a while if we connect to AP a while ago. */ if (mac->cnt_after_linked >= 2) { @@ -406,7 +406,7 @@ void rtl_lps_enter(struct ieee80211_hw *hw) } } - spin_unlock(&rtlpriv->locks.lps_lock); + spin_unlock_irq(&rtlpriv->locks.lps_lock); } /*Leave the leisure power save mode.*/ @@ -415,8 +415,9 @@ void rtl_lps_leave(struct ieee80211_hw *hw) struct rtl_priv *rtlpriv = rtl_priv(hw); struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + unsigned long flags; - spin_lock(&rtlpriv->locks.lps_lock); + spin_lock_irqsave(&rtlpriv->locks.lps_lock, flags); if (ppsc->fwctrl_lps) { if (ppsc->dot11_psmode != EACTIVE) { @@ -437,7 +438,7 @@ void rtl_lps_leave(struct ieee80211_hw *hw) rtl_lps_set_psmode(hw, EACTIVE); } } - spin_unlock(&rtlpriv->locks.lps_lock); + spin_unlock_irqrestore(&rtlpriv->locks.lps_lock, flags); } /* For sw LPS*/ @@ -538,9 +539,9 @@ void rtl_swlps_rf_awake(struct ieee80211_hw *hw) RT_CLEAR_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM); } - spin_lock(&rtlpriv->locks.lps_lock); + spin_lock_irq(&rtlpriv->locks.lps_lock); rtl_ps_set_rf_state(hw, ERFON, RF_CHANGE_BY_PS); - spin_unlock(&rtlpriv->locks.lps_lock); + spin_unlock_irq(&rtlpriv->locks.lps_lock); } void rtl_swlps_rfon_wq_callback(void *data) @@ -573,9 +574,9 @@ void rtl_swlps_rf_sleep(struct ieee80211_hw *hw) if (rtlpriv->link_info.busytraffic) return; - spin_lock(&rtlpriv->locks.lps_lock); + spin_lock_irq(&rtlpriv->locks.lps_lock); rtl_ps_set_rf_state(hw, ERFSLEEP, RF_CHANGE_BY_PS); - spin_unlock(&rtlpriv->locks.lps_lock); + spin_unlock_irq(&rtlpriv->locks.lps_lock); if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM && !RT_IN_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM)) { -- cgit v0.10.2 From a73228124bed4022d4d4c5663d9679ba2fb99c6c Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 26 Nov 2011 23:37:43 +0100 Subject: ath9k: Revert change that broke AR928X on Acer Ferrari One Revert a hunk in drivers/net/wireless/ath/ath9k/hw.c introduced by commit 2577c6e8f2320f1d2f09be122efef5b9118efee4 (ath9k_hw: Add support for AR946/8x chipsets) that caused a nasty regression to appear on my Acer Ferrari One (the box locks up entirely at random times after the wireless has been started without any way to get debug information out of it). Signed-off-by: Rafael J. Wysocki Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index b479160..7a9c6f7 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1826,7 +1826,8 @@ static void ath9k_set_power_sleep(struct ath_hw *ah, int setChip) } /* Clear Bit 14 of AR_WA after putting chip into Full Sleep mode. */ - REG_WRITE(ah, AR_WA, ah->WARegVal & ~AR_WA_D3_L1_DISABLE); + if (AR_SREV_9300_20_OR_LATER(ah)) + REG_WRITE(ah, AR_WA, ah->WARegVal & ~AR_WA_D3_L1_DISABLE); } /* -- cgit v0.10.2 From d305a6557b2c4dca0110f05ffe745b1ef94adb80 Mon Sep 17 00:00:00 2001 From: Nikolay Martynov Date: Mon, 28 Nov 2011 09:18:00 +0100 Subject: mac80211: fix race condition caused by late addBA response If addBA responses comes in just after addba_resp_timer has expired mac80211 will still accept it and try to open the aggregation session. This causes drivers to be confused and in some cases even crash. This patch fixes the race condition and makes sure that if addba_resp_timer has expired addBA response is not longer accepted and we do not try to open half-closed session. Cc: stable@vger.kernel.org Signed-off-by: Nikolay Martynov [some adjustments] Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index 674b345..eea6e5c 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -762,11 +762,27 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local, goto out; } - del_timer(&tid_tx->addba_resp_timer); + del_timer_sync(&tid_tx->addba_resp_timer); #ifdef CONFIG_MAC80211_HT_DEBUG printk(KERN_DEBUG "switched off addBA timer for tid %d\n", tid); #endif + + /* + * addba_resp_timer may have fired before we got here, and + * caused WANT_STOP to be set. If the stop then was already + * processed further, STOPPING might be set. + */ + if (test_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state) || + test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) { +#ifdef CONFIG_MAC80211_HT_DEBUG + printk(KERN_DEBUG + "got addBA resp for tid %d but we already gave up\n", + tid); +#endif + goto out; + } + /* * IEEE 802.11-2007 7.3.1.14: * In an ADDBA Response frame, when the Status Code field -- cgit v0.10.2 From 2a1e0fd175dcfd72096ba9291d31e3b1b5342e60 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 27 Nov 2011 15:29:44 +0200 Subject: mac80211: fix race between the AGG SM and the Tx data path When a packet is supposed to sent be as an a-MPDU, mac80211 sets IEEE80211_TX_CTL_AMPDU to let the driver know. On the other hand, mac80211 configures the driver for aggregration with the ampdu_action callback. There is race between these two mechanisms since the following scenario can occur when the BA agreement is torn down: Tx softIRQ drv configuration ========== ================= check OPERATIONAL bit Set the TX_CTL_AMPDU bit in the packet clear OPERATIONAL bit stop Tx AGG Pass Tx packet to the driver. In that case the driver would get a packet with TX_CTL_AMPDU set although it has already been notified that the BA session has been torn down. To fix this, we need to synchronize all the Qdisc activity after we cleared the OPERATIONAL bit. After that step, all the following packets will be buffered until the driver reports it is ready to get new packets for this RA / TID. This buffering allows not to run into another race that would send packets with TX_CTL_AMPDU unset while the driver hasn't been requested to tear down the BA session yet. This race occurs in practice and iwlwifi complains with a WARN_ON when it happens. Cc: stable@kernel.org Signed-off-by: Emmanuel Grumbach Reviewed-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index eea6e5c..331472c 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -192,6 +192,20 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, */ clear_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state); + /* + * There might be a few packets being processed right now (on + * another CPU) that have already gotten past the aggregation + * check when it was still OPERATIONAL and consequently have + * IEEE80211_TX_CTL_AMPDU set. In that case, this code might + * call into the driver at the same time or even before the + * TX paths calls into it, which could confuse the driver. + * + * Wait for all currently running TX paths to finish before + * telling the driver. New packets will not go through since + * the aggregation session is no longer OPERATIONAL. + */ + synchronize_net(); + tid_tx->stop_initiator = initiator; tid_tx->tx_stop = tx; -- cgit v0.10.2 From ba305e31e88ea5c2f598ff9fbc5424711a429e30 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Mon, 28 Nov 2011 16:53:19 +0200 Subject: regulator: twl: fix twl4030 support for smps regulators SMPS regulator voltage control differs from the one of the LDO ones. Current TWL code was using LDO regulator ops for controlling the SMPS regulators, which fails. This was fixed fixed by adding separate regulator type which uses correct logic and calculations for the voltage levels. Signed-off-by: Tero Kristo Signed-off-by: Mark Brown Cc: stable@kernel.org diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index ee8747f..11cc308 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -71,6 +71,7 @@ struct twlreg_info { #define VREG_TYPE 1 #define VREG_REMAP 2 #define VREG_DEDICATED 3 /* LDO control */ +#define VREG_VOLTAGE_SMPS_4030 9 /* TWL6030 register offsets */ #define VREG_TRANS 1 #define VREG_STATE 2 @@ -514,6 +515,32 @@ static struct regulator_ops twl4030ldo_ops = { .get_status = twl4030reg_get_status, }; +static int +twl4030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV, + unsigned *selector) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + int vsel = DIV_ROUND_UP(min_uV - 600000, 12500); + + twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE_SMPS_4030, + vsel); + return 0; +} + +static int twl4030smps_get_voltage(struct regulator_dev *rdev) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + int vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER, + VREG_VOLTAGE_SMPS_4030); + + return vsel * 12500 + 600000; +} + +static struct regulator_ops twl4030smps_ops = { + .set_voltage = twl4030smps_set_voltage, + .get_voltage = twl4030smps_get_voltage, +}; + static int twl6030ldo_list_voltage(struct regulator_dev *rdev, unsigned index) { struct twlreg_info *info = rdev_get_drvdata(rdev); @@ -856,6 +883,21 @@ static struct regulator_ops twlsmps_ops = { }, \ } +#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf) \ + { \ + .base = offset, \ + .id = num, \ + .delay = turnon_delay, \ + .remap = remap_conf, \ + .desc = { \ + .name = #label, \ + .id = TWL4030_REG_##label, \ + .ops = &twl4030smps_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + }, \ + } + #define TWL6030_ADJUSTABLE_LDO(label, offset, min_mVolts, max_mVolts) { \ .base = offset, \ .min_mV = min_mVolts, \ @@ -947,8 +989,8 @@ static struct twlreg_info twl_regs[] = { TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12, 100, 0x08), TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08), TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14, 1000, 0x08), - TWL4030_ADJUSTABLE_LDO(VDD1, 0x55, 15, 1000, 0x08), - TWL4030_ADJUSTABLE_LDO(VDD2, 0x63, 16, 1000, 0x08), + TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08), + TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08), TWL4030_FIXED_LDO(VUSB1V5, 0x71, 1500, 17, 100, 0x08), TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18, 100, 0x08), TWL4030_FIXED_LDO(VUSB3V1, 0x77, 3100, 19, 150, 0x08), -- cgit v0.10.2 From c34c97ad8c7c3cdacab2327235c2df4454ff1a06 Mon Sep 17 00:00:00 2001 From: Jonathan Lallinger Date: Thu, 20 Oct 2011 13:25:14 -0500 Subject: RDMA/cxgb4: Fix iw_cxgb4 count_rcqes() logic Fix another place in the code where logic dealing with the t4_cqe was using the wrong QID. This fixes the counting logic so that it tests against the SQ QID instead of the RQ QID when counting RCQES. Signed-off by: Jonathan Lallinger Signed-off by: Steve Wise Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/cxgb4/cq.c b/drivers/infiniband/hw/cxgb4/cq.c index f35a935..0f1607c 100644 --- a/drivers/infiniband/hw/cxgb4/cq.c +++ b/drivers/infiniband/hw/cxgb4/cq.c @@ -311,7 +311,7 @@ void c4iw_count_rcqes(struct t4_cq *cq, struct t4_wq *wq, int *count) while (ptr != cq->sw_pidx) { cqe = &cq->sw_queue[ptr]; if (RQ_TYPE(cqe) && (CQE_OPCODE(cqe) != FW_RI_READ_RESP) && - (CQE_QPID(cqe) == wq->rq.qid) && cqe_completes_wr(cqe, wq)) + (CQE_QPID(cqe) == wq->sq.qid) && cqe_completes_wr(cqe, wq)) (*count)++; if (++ptr == cq->size) ptr = 0; -- cgit v0.10.2 From 01b225e18fcb540c5d615ca79ef832473451f118 Mon Sep 17 00:00:00 2001 From: Kumar Sanghvi Date: Mon, 28 Nov 2011 22:09:15 +0530 Subject: RDMA/cxgb4: Fix retry with MPAv1 logic for MPAv2 Fix logic so that we don't retry with MPAv1 once we have done that already. Otherwise, we end up retrying with MPAv1 even when its not needed on getting peer aborts - and this could lead to kernel panic. Signed-off-by: Kumar Sanghvi Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index b36cdac..760b2fe 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -542,8 +542,10 @@ static void send_mpa_req(struct c4iw_ep *ep, struct sk_buff *skb, (mpa_rev_to_use == 2 ? MPA_ENHANCED_RDMA_CONN : 0); mpa->private_data_size = htons(ep->plen); mpa->revision = mpa_rev_to_use; - if (mpa_rev_to_use == 1) + if (mpa_rev_to_use == 1) { ep->tried_with_mpa_v1 = 1; + ep->retry_with_mpa_v1 = 0; + } if (mpa_rev_to_use == 2) { mpa->private_data_size += -- cgit v0.10.2 From 8ee887d74b3d741991edaa1836d22636c28926d9 Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Wed, 9 Nov 2011 17:07:22 -0500 Subject: IB/qib: Fix over-scheduling of QSFP work Don't over-schedule QSFP work on driver initialization. It could end up being run simultaneously on two different CPUs resulting in bad EEPROM reads. In combination with setting the physical IB link state prior to the IBC being brought out of reset, this can cause the link state machine to start training early with wrong settings. Signed-off-by: Mitko Haralanov Signed-off-by: Mike Marciniszyn Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c index 8b46b60..1d58959 100644 --- a/drivers/infiniband/hw/qib/qib_iba7322.c +++ b/drivers/infiniband/hw/qib/qib_iba7322.c @@ -2307,19 +2307,11 @@ static int qib_7322_bringup_serdes(struct qib_pportdata *ppd) SYM_LSB(IBCCtrlA_0, MaxPktLen); ppd->cpspec->ibcctrl_a = ibc; /* without linkcmd or linkinitcmd! */ - /* initially come up waiting for TS1, without sending anything. */ - val = ppd->cpspec->ibcctrl_a | (QLOGIC_IB_IBCC_LINKINITCMD_DISABLE << - QLOGIC_IB_IBCC_LINKINITCMD_SHIFT); - - ppd->cpspec->ibcctrl_a = val; /* * Reset the PCS interface to the serdes (and also ibc, which is still * in reset from above). Writes new value of ibcctrl_a as last step. */ qib_7322_mini_pcs_reset(ppd); - qib_write_kreg(dd, kr_scratch, 0ULL); - /* clear the linkinit cmds */ - ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, LinkInitCmd); if (!ppd->cpspec->ibcctrl_b) { unsigned lse = ppd->link_speed_enabled; @@ -2385,6 +2377,14 @@ static int qib_7322_bringup_serdes(struct qib_pportdata *ppd) ppd->cpspec->ibcctrl_a |= SYM_MASK(IBCCtrlA_0, IBLinkEn); set_vls(ppd); + /* initially come up DISABLED, without sending anything. */ + val = ppd->cpspec->ibcctrl_a | (QLOGIC_IB_IBCC_LINKINITCMD_DISABLE << + QLOGIC_IB_IBCC_LINKINITCMD_SHIFT); + qib_write_kreg_port(ppd, krp_ibcctrl_a, val); + qib_write_kreg(dd, kr_scratch, 0ULL); + /* clear the linkinit cmds */ + ppd->cpspec->ibcctrl_a = val & ~SYM_MASK(IBCCtrlA_0, LinkInitCmd); + /* be paranoid against later code motion, etc. */ spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvIBPortEnable); diff --git a/drivers/infiniband/hw/qib/qib_qsfp.c b/drivers/infiniband/hw/qib/qib_qsfp.c index e06c4ed..fa71b1e 100644 --- a/drivers/infiniband/hw/qib/qib_qsfp.c +++ b/drivers/infiniband/hw/qib/qib_qsfp.c @@ -480,18 +480,6 @@ void qib_qsfp_init(struct qib_qsfp_data *qd, udelay(20); /* Generous RST dwell */ dd->f_gpio_mod(dd, mask, mask, mask); - /* Spec says module can take up to two seconds! */ - mask = QSFP_GPIO_MOD_PRS_N; - if (qd->ppd->hw_pidx) - mask <<= QSFP_GPIO_PORT2_SHIFT; - - /* Do not try to wait here. Better to let event handle it */ - if (!qib_qsfp_mod_present(qd->ppd)) - goto bail; - /* We see a module, but it may be unwise to look yet. Just schedule */ - qd->t_insert = get_jiffies_64(); - queue_work(ib_wq, &qd->work); -bail: return; } -- cgit v0.10.2 From 5841eb6402707a387b216373e65c9c28e8136663 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 23 Nov 2011 21:18:39 +0100 Subject: PM / Domains: Document how PM domains are used by the PM core The current power management documentation in Documentation/power/ either doesn't cover PM domains at all, or gives inaccurate information about them, so update the relevant files in there to follow the code. Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt index 646a89e..4342acb 100644 --- a/Documentation/power/devices.txt +++ b/Documentation/power/devices.txt @@ -123,9 +123,10 @@ please refer directly to the source code for more information about it. Subsystem-Level Methods ----------------------- The core methods to suspend and resume devices reside in struct dev_pm_ops -pointed to by the pm member of struct bus_type, struct device_type and -struct class. They are mostly of interest to the people writing infrastructure -for buses, like PCI or USB, or device type and device class drivers. +pointed to by the ops member of struct dev_pm_domain, or by the pm member of +struct bus_type, struct device_type and struct class. They are mostly of +interest to the people writing infrastructure for platforms and buses, like PCI +or USB, or device type and device class drivers. Bus drivers implement these methods as appropriate for the hardware and the drivers using it; PCI works differently from USB, and so on. Not many people @@ -251,18 +252,29 @@ various phases always run after tasks have been frozen and before they are unfrozen. Furthermore, the *_noirq phases run at a time when IRQ handlers have been disabled (except for those marked with the IRQ_WAKEUP flag). -All phases use bus, type, or class callbacks (that is, methods defined in -dev->bus->pm, dev->type->pm, or dev->class->pm). These callbacks are mutually -exclusive, so if the device type provides a struct dev_pm_ops object pointed to -by its pm field (i.e. both dev->type and dev->type->pm are defined), the -callbacks included in that object (i.e. dev->type->pm) will be used. Otherwise, -if the class provides a struct dev_pm_ops object pointed to by its pm field -(i.e. both dev->class and dev->class->pm are defined), the PM core will use the -callbacks from that object (i.e. dev->class->pm). Finally, if the pm fields of -both the device type and class objects are NULL (or those objects do not exist), -the callbacks provided by the bus (that is, the callbacks from dev->bus->pm) -will be used (this allows device types to override callbacks provided by bus -types or classes if necessary). +All phases use PM domain, bus, type, or class callbacks (that is, methods +defined in dev->pm_domain->ops, dev->bus->pm, dev->type->pm, or dev->class->pm). +These callbacks are regarded by the PM core as mutually exclusive. Moreover, +PM domain callbacks always take precedence over bus, type and class callbacks, +while type callbacks take precedence over bus and class callbacks, and class +callbacks take precedence over bus callbacks. To be precise, the following +rules are used to determine which callback to execute in the given phase: + + 1. If dev->pm_domain is present, the PM core will attempt to execute the + callback included in dev->pm_domain->ops. If that callback is not + present, no action will be carried out for the given device. + + 2. Otherwise, if both dev->type and dev->type->pm are present, the callback + included in dev->type->pm will be executed. + + 3. Otherwise, if both dev->class and dev->class->pm are present, the + callback included in dev->class->pm will be executed. + + 4. Otherwise, if both dev->bus and dev->bus->pm are present, the callback + included in dev->bus->pm will be executed. + +This allows PM domains and device types to override callbacks provided by bus +types or device classes if necessary. These callbacks may in turn invoke device- or driver-specific methods stored in dev->driver->pm, but they don't have to. diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt index 5336149..79b10a0 100644 --- a/Documentation/power/runtime_pm.txt +++ b/Documentation/power/runtime_pm.txt @@ -44,17 +44,24 @@ struct dev_pm_ops { }; The ->runtime_suspend(), ->runtime_resume() and ->runtime_idle() callbacks -are executed by the PM core for either the power domain, or the device type -(if the device power domain's struct dev_pm_ops does not exist), or the class -(if the device power domain's and type's struct dev_pm_ops object does not -exist), or the bus type (if the device power domain's, type's and class' -struct dev_pm_ops objects do not exist) of the given device, so the priority -order of callbacks from high to low is that power domain callbacks, device -type callbacks, class callbacks and bus type callbacks, and the high priority -one will take precedence over low priority one. The bus type, device type and -class callbacks are referred to as subsystem-level callbacks in what follows, -and generally speaking, the power domain callbacks are used for representing -power domains within a SoC. +are executed by the PM core for the device's subsystem that may be either of +the following: + + 1. PM domain of the device, if the device's PM domain object, dev->pm_domain, + is present. + + 2. Device type of the device, if both dev->type and dev->type->pm are present. + + 3. Device class of the device, if both dev->class and dev->class->pm are + present. + + 4. Bus type of the device, if both dev->bus and dev->bus->pm are present. + +The PM core always checks which callback to use in the order given above, so the +priority order of callbacks from high to low is: PM domain, device type, class +and bus type. Moreover, the high-priority one will always take precedence over +a low-priority one. The PM domain, bus type, device type and class callbacks +are referred to as subsystem-level callbacks in what follows. By default, the callbacks are always invoked in process context with interrupts enabled. However, subsystems can use the pm_runtime_irq_safe() helper function -- cgit v0.10.2 From fa8ce723936460fcf7e49f508fd5dbd5125e39c4 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 23 Nov 2011 21:19:57 +0100 Subject: PM / Sleep: Correct inaccurate information in devices.txt The documentation file Documentation/power/devices.txt contains some information that isn't correct any more due to code modifications made after that file had been created (or updated last time). Fix this. Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt index 4342acb..ed32288 100644 --- a/Documentation/power/devices.txt +++ b/Documentation/power/devices.txt @@ -250,7 +250,7 @@ for every device before the next phase begins. Not all busses or classes support all these callbacks and not all drivers use all the callbacks. The various phases always run after tasks have been frozen and before they are unfrozen. Furthermore, the *_noirq phases run at a time when IRQ handlers have -been disabled (except for those marked with the IRQ_WAKEUP flag). +been disabled (except for those marked with the IRQF_NO_SUSPEND flag). All phases use PM domain, bus, type, or class callbacks (that is, methods defined in dev->pm_domain->ops, dev->bus->pm, dev->type->pm, or dev->class->pm). @@ -295,9 +295,8 @@ When the system goes into the standby or memory sleep state, the phases are: After the prepare callback method returns, no new children may be registered below the device. The method may also prepare the device or - driver in some way for the upcoming system power transition (for - example, by allocating additional memory required for this purpose), but - it should not put the device into a low-power state. + driver in some way for the upcoming system power transition, but it + should not put the device into a low-power state. 2. The suspend methods should quiesce the device to stop it from performing I/O. They also may save the device registers and put it into the -- cgit v0.10.2 From 907565921966260921e4c4581ed8985ef4cf9a67 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 23 Nov 2011 21:20:07 +0100 Subject: PM / Runtime: Make documentation follow the new behavior of irq_safe The runtime PM core code behavior related to the power.irq_safe device flag has changed recently and the documentation should be modified to reflect it. Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt index 79b10a0..c2ae8bf 100644 --- a/Documentation/power/runtime_pm.txt +++ b/Documentation/power/runtime_pm.txt @@ -65,11 +65,12 @@ are referred to as subsystem-level callbacks in what follows. By default, the callbacks are always invoked in process context with interrupts enabled. However, subsystems can use the pm_runtime_irq_safe() helper function -to tell the PM core that a device's ->runtime_suspend() and ->runtime_resume() -callbacks should be invoked in atomic context with interrupts disabled. -This implies that these callback routines must not block or sleep, but it also -means that the synchronous helper functions listed at the end of Section 4 can -be used within an interrupt handler or in an atomic context. +to tell the PM core that their ->runtime_suspend(), ->runtime_resume() and +->runtime_idle() callbacks may be invoked in atomic context with interrupts +disabled for a given device. This implies that the callback routines in +question must not block or sleep, but it also means that the synchronous helper +functions listed at the end of Section 4 may be used for that device within an +interrupt handler or generally in an atomic context. The subsystem-level suspend callback is _entirely_ _responsible_ for handling the suspend of the device as appropriate, which may, but need not include -- cgit v0.10.2 From fafba48d4dd6fcbb1fd7ac4ab0ba22ef45b9796c Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 23 Nov 2011 21:20:15 +0100 Subject: PM / Sleep: Update documentation related to system wakeup The system wakeup section of Documentation/power/devices.txt is outdated, so make it agree with the current code. Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt index ed32288..3139fb5 100644 --- a/Documentation/power/devices.txt +++ b/Documentation/power/devices.txt @@ -140,41 +140,57 @@ sequencing in the driver model tree. /sys/devices/.../power/wakeup files ----------------------------------- -All devices in the driver model have two flags to control handling of wakeup -events (hardware signals that can force the device and/or system out of a low -power state). These flags are initialized by bus or device driver code using +All device objects in the driver model contain fields that control the handling +of system wakeup events (hardware signals that can force the system out of a +sleep state). These fields are initialized by bus or device driver code using device_set_wakeup_capable() and device_set_wakeup_enable(), defined in include/linux/pm_wakeup.h. -The "can_wakeup" flag just records whether the device (and its driver) can +The "power.can_wakeup" flag just records whether the device (and its driver) can physically support wakeup events. The device_set_wakeup_capable() routine -affects this flag. The "should_wakeup" flag controls whether the device should -try to use its wakeup mechanism. device_set_wakeup_enable() affects this flag; -for the most part drivers should not change its value. The initial value of -should_wakeup is supposed to be false for the majority of devices; the major -exceptions are power buttons, keyboards, and Ethernet adapters whose WoL -(wake-on-LAN) feature has been set up with ethtool. It should also default -to true for devices that don't generate wakeup requests on their own but merely -forward wakeup requests from one bus to another (like PCI bridges). +affects this flag. The "power.wakeup" field is a pointer to an object of type +struct wakeup_source used for controlling whether or not the device should use +its system wakeup mechanism and for notifying the PM core of system wakeup +events signaled by the device. This object is only present for wakeup-capable +devices (i.e. devices whose "can_wakeup" flags are set) and is created (or +removed) by device_set_wakeup_capable(). Whether or not a device is capable of issuing wakeup events is a hardware matter, and the kernel is responsible for keeping track of it. By contrast, whether or not a wakeup-capable device should issue wakeup events is a policy decision, and it is managed by user space through a sysfs attribute: the -power/wakeup file. User space can write the strings "enabled" or "disabled" to -set or clear the "should_wakeup" flag, respectively. This file is only present -for wakeup-capable devices (i.e. devices whose "can_wakeup" flags are set) -and is created (or removed) by device_set_wakeup_capable(). Reads from the -file will return the corresponding string. - -The device_may_wakeup() routine returns true only if both flags are set. +"power/wakeup" file. User space can write the strings "enabled" or "disabled" +to it to indicate whether or not, respectively, the device is supposed to signal +system wakeup. This file is only present if the "power.wakeup" object exists +for the given device and is created (or removed) along with that object, by +device_set_wakeup_capable(). Reads from the file will return the corresponding +string. + +The "power/wakeup" file is supposed to contain the "disabled" string initially +for the majority of devices; the major exceptions are power buttons, keyboards, +and Ethernet adapters whose WoL (wake-on-LAN) feature has been set up with +ethtool. It should also default to "enabled" for devices that don't generate +wakeup requests on their own but merely forward wakeup requests from one bus to +another (like PCI Express ports). + +The device_may_wakeup() routine returns true only if the "power.wakeup" object +exists and the corresponding "power/wakeup" file contains the string "enabled". This information is used by subsystems, like the PCI bus type code, to see whether or not to enable the devices' wakeup mechanisms. If device wakeup mechanisms are enabled or disabled directly by drivers, they also should use device_may_wakeup() to decide what to do during a system sleep transition. -However for runtime power management, wakeup events should be enabled whenever -the device and driver both support them, regardless of the should_wakeup flag. - +Device drivers, however, are not supposed to call device_set_wakeup_enable() +directly in any case. + +It ought to be noted that system wakeup is conceptually different from "remote +wakeup" used by runtime power management, although it may be supported by the +same physical mechanism. Remote wakeup is a feature allowing devices in +low-power states to trigger specific interrupts to signal conditions in which +they should be put into the full-power state. Those interrupts may or may not +be used to signal system wakeup events, depending on the hardware design. On +some systems it is impossible to trigger them from system sleep states. In any +case, remote wakeup should always be enabled for runtime power management for +all devices and drivers that support it. /sys/devices/.../power/control files ------------------------------------ -- cgit v0.10.2 From f7bc83d87d242917ca0ee041ed509f57f361dd56 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 23 Nov 2011 21:20:32 +0100 Subject: PM: Update comments describing device power management callbacks The comments describing device power management callbacks in include/pm.h are outdated and somewhat confusing, so make them reflect the reality more accurately. Signed-off-by: Rafael J. Wysocki diff --git a/include/linux/pm.h b/include/linux/pm.h index 5c4c8b1..3f3ed83 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -54,118 +54,145 @@ typedef struct pm_message { /** * struct dev_pm_ops - device PM callbacks * - * Several driver power state transitions are externally visible, affecting + * Several device power state transitions are externally visible, affecting * the state of pending I/O queues and (for drivers that touch hardware) * interrupts, wakeups, DMA, and other hardware state. There may also be - * internal transitions to various low power modes, which are transparent + * internal transitions to various low-power modes which are transparent * to the rest of the driver stack (such as a driver that's ON gating off * clocks which are not in active use). * - * The externally visible transitions are handled with the help of the following - * callbacks included in this structure: - * - * @prepare: Prepare the device for the upcoming transition, but do NOT change - * its hardware state. Prevent new children of the device from being - * registered after @prepare() returns (the driver's subsystem and - * generally the rest of the kernel is supposed to prevent new calls to the - * probe method from being made too once @prepare() has succeeded). If - * @prepare() detects a situation it cannot handle (e.g. registration of a - * child already in progress), it may return -EAGAIN, so that the PM core - * can execute it once again (e.g. after the new child has been registered) - * to recover from the race condition. This method is executed for all - * kinds of suspend transitions and is followed by one of the suspend - * callbacks: @suspend(), @freeze(), or @poweroff(). - * The PM core executes @prepare() for all devices before starting to - * execute suspend callbacks for any of them, so drivers may assume all of - * the other devices to be present and functional while @prepare() is being - * executed. In particular, it is safe to make GFP_KERNEL memory - * allocations from within @prepare(). However, drivers may NOT assume - * anything about the availability of the user space at that time and it - * is not correct to request firmware from within @prepare() (it's too - * late to do that). [To work around this limitation, drivers may - * register suspend and hibernation notifiers that are executed before the - * freezing of tasks.] + * The externally visible transitions are handled with the help of callbacks + * included in this structure in such a way that two levels of callbacks are + * involved. First, the PM core executes callbacks provided by PM domains, + * device types, classes and bus types. They are the subsystem-level callbacks + * supposed to execute callbacks provided by device drivers, although they may + * choose not to do that. If the driver callbacks are executed, they have to + * collaborate with the subsystem-level callbacks to achieve the goals + * appropriate for the given system transition, given transition phase and the + * subsystem the device belongs to. + * + * @prepare: The principal role of this callback is to prevent new children of + * the device from being registered after it has returned (the driver's + * subsystem and generally the rest of the kernel is supposed to prevent + * new calls to the probe method from being made too once @prepare() has + * succeeded). If @prepare() detects a situation it cannot handle (e.g. + * registration of a child already in progress), it may return -EAGAIN, so + * that the PM core can execute it once again (e.g. after a new child has + * been registered) to recover from the race condition. + * This method is executed for all kinds of suspend transitions and is + * followed by one of the suspend callbacks: @suspend(), @freeze(), or + * @poweroff(). The PM core executes subsystem-level @prepare() for all + * devices before starting to invoke suspend callbacks for any of them, so + * generally devices may be assumed to be functional or to respond to + * runtime resume requests while @prepare() is being executed. However, + * device drivers may NOT assume anything about the availability of user + * space at that time and it is NOT valid to request firmware from within + * @prepare() (it's too late to do that). It also is NOT valid to allocate + * substantial amounts of memory from @prepare() in the GFP_KERNEL mode. + * [To work around these limitations, drivers may register suspend and + * hibernation notifiers to be executed before the freezing of tasks.] * * @complete: Undo the changes made by @prepare(). This method is executed for * all kinds of resume transitions, following one of the resume callbacks: * @resume(), @thaw(), @restore(). Also called if the state transition - * fails before the driver's suspend callback (@suspend(), @freeze(), - * @poweroff()) can be executed (e.g. if the suspend callback fails for one + * fails before the driver's suspend callback: @suspend(), @freeze() or + * @poweroff(), can be executed (e.g. if the suspend callback fails for one * of the other devices that the PM core has unsuccessfully attempted to * suspend earlier). - * The PM core executes @complete() after it has executed the appropriate - * resume callback for all devices. + * The PM core executes subsystem-level @complete() after it has executed + * the appropriate resume callbacks for all devices. * * @suspend: Executed before putting the system into a sleep state in which the - * contents of main memory are preserved. Quiesce the device, put it into - * a low power state appropriate for the upcoming system state (such as - * PCI_D3hot), and enable wakeup events as appropriate. + * contents of main memory are preserved. The exact action to perform + * depends on the device's subsystem (PM domain, device type, class or bus + * type), but generally the device must be quiescent after subsystem-level + * @suspend() has returned, so that it doesn't do any I/O or DMA. + * Subsystem-level @suspend() is executed for all devices after invoking + * subsystem-level @prepare() for all of them. * * @resume: Executed after waking the system up from a sleep state in which the - * contents of main memory were preserved. Put the device into the - * appropriate state, according to the information saved in memory by the - * preceding @suspend(). The driver starts working again, responding to - * hardware events and software requests. The hardware may have gone - * through a power-off reset, or it may have maintained state from the - * previous suspend() which the driver may rely on while resuming. On most - * platforms, there are no restrictions on availability of resources like - * clocks during @resume(). + * contents of main memory were preserved. The exact action to perform + * depends on the device's subsystem, but generally the driver is expected + * to start working again, responding to hardware events and software + * requests (the device itself may be left in a low-power state, waiting + * for a runtime resume to occur). The state of the device at the time its + * driver's @resume() callback is run depends on the platform and subsystem + * the device belongs to. On most platforms, there are no restrictions on + * availability of resources like clocks during @resume(). + * Subsystem-level @resume() is executed for all devices after invoking + * subsystem-level @resume_noirq() for all of them. * * @freeze: Hibernation-specific, executed before creating a hibernation image. - * Quiesce operations so that a consistent image can be created, but do NOT - * otherwise put the device into a low power device state and do NOT emit - * system wakeup events. Save in main memory the device settings to be - * used by @restore() during the subsequent resume from hibernation or by - * the subsequent @thaw(), if the creation of the image or the restoration - * of main memory contents from it fails. + * Analogous to @suspend(), but it should not enable the device to signal + * wakeup events or change its power state. The majority of subsystems + * (with the notable exception of the PCI bus type) expect the driver-level + * @freeze() to save the device settings in memory to be used by @restore() + * during the subsequent resume from hibernation. + * Subsystem-level @freeze() is executed for all devices after invoking + * subsystem-level @prepare() for all of them. * * @thaw: Hibernation-specific, executed after creating a hibernation image OR - * if the creation of the image fails. Also executed after a failing + * if the creation of an image has failed. Also executed after a failing * attempt to restore the contents of main memory from such an image. * Undo the changes made by the preceding @freeze(), so the device can be * operated in the same way as immediately before the call to @freeze(). + * Subsystem-level @thaw() is executed for all devices after invoking + * subsystem-level @thaw_noirq() for all of them. It also may be executed + * directly after @freeze() in case of a transition error. * * @poweroff: Hibernation-specific, executed after saving a hibernation image. - * Quiesce the device, put it into a low power state appropriate for the - * upcoming system state (such as PCI_D3hot), and enable wakeup events as - * appropriate. + * Analogous to @suspend(), but it need not save the device's settings in + * memory. + * Subsystem-level @poweroff() is executed for all devices after invoking + * subsystem-level @prepare() for all of them. * * @restore: Hibernation-specific, executed after restoring the contents of main - * memory from a hibernation image. Driver starts working again, - * responding to hardware events and software requests. Drivers may NOT - * make ANY assumptions about the hardware state right prior to @restore(). - * On most platforms, there are no restrictions on availability of - * resources like clocks during @restore(). - * - * @suspend_noirq: Complete the operations of ->suspend() by carrying out any - * actions required for suspending the device that need interrupts to be - * disabled - * - * @resume_noirq: Prepare for the execution of ->resume() by carrying out any - * actions required for resuming the device that need interrupts to be - * disabled - * - * @freeze_noirq: Complete the operations of ->freeze() by carrying out any - * actions required for freezing the device that need interrupts to be - * disabled - * - * @thaw_noirq: Prepare for the execution of ->thaw() by carrying out any - * actions required for thawing the device that need interrupts to be - * disabled - * - * @poweroff_noirq: Complete the operations of ->poweroff() by carrying out any - * actions required for handling the device that need interrupts to be - * disabled - * - * @restore_noirq: Prepare for the execution of ->restore() by carrying out any - * actions required for restoring the operations of the device that need - * interrupts to be disabled + * memory from a hibernation image, analogous to @resume(). + * + * @suspend_noirq: Complete the actions started by @suspend(). Carry out any + * additional operations required for suspending the device that might be + * racing with its driver's interrupt handler, which is guaranteed not to + * run while @suspend_noirq() is being executed. + * It generally is expected that the device will be in a low-power state + * (appropriate for the target system sleep state) after subsystem-level + * @suspend_noirq() has returned successfully. If the device can generate + * system wakeup signals and is enabled to wake up the system, it should be + * configured to do so at that time. However, depending on the platform + * and device's subsystem, @suspend() may be allowed to put the device into + * the low-power state and configure it to generate wakeup signals, in + * which case it generally is not necessary to define @suspend_noirq(). + * + * @resume_noirq: Prepare for the execution of @resume() by carrying out any + * operations required for resuming the device that might be racing with + * its driver's interrupt handler, which is guaranteed not to run while + * @resume_noirq() is being executed. + * + * @freeze_noirq: Complete the actions started by @freeze(). Carry out any + * additional operations required for freezing the device that might be + * racing with its driver's interrupt handler, which is guaranteed not to + * run while @freeze_noirq() is being executed. + * The power state of the device should not be changed by either @freeze() + * or @freeze_noirq() and it should not be configured to signal system + * wakeup by any of these callbacks. + * + * @thaw_noirq: Prepare for the execution of @thaw() by carrying out any + * operations required for thawing the device that might be racing with its + * driver's interrupt handler, which is guaranteed not to run while + * @thaw_noirq() is being executed. + * + * @poweroff_noirq: Complete the actions started by @poweroff(). Analogous to + * @suspend_noirq(), but it need not save the device's settings in memory. + * + * @restore_noirq: Prepare for the execution of @restore() by carrying out any + * operations required for thawing the device that might be racing with its + * driver's interrupt handler, which is guaranteed not to run while + * @restore_noirq() is being executed. Analogous to @resume_noirq(). * * All of the above callbacks, except for @complete(), return error codes. * However, the error codes returned by the resume operations, @resume(), - * @thaw(), @restore(), @resume_noirq(), @thaw_noirq(), and @restore_noirq() do + * @thaw(), @restore(), @resume_noirq(), @thaw_noirq(), and @restore_noirq(), do * not cause the PM core to abort the resume transition during which they are - * returned. The error codes returned in that cases are only printed by the PM + * returned. The error codes returned in those cases are only printed by the PM * core to the system logs for debugging purposes. Still, it is recommended * that drivers only return error codes from their resume methods in case of an * unrecoverable failure (i.e. when the device being handled refuses to resume @@ -174,31 +201,43 @@ typedef struct pm_message { * their children. * * It is allowed to unregister devices while the above callbacks are being - * executed. However, it is not allowed to unregister a device from within any - * of its own callbacks. + * executed. However, a callback routine must NOT try to unregister the device + * it was called for, although it may unregister children of that device (for + * example, if it detects that a child was unplugged while the system was + * asleep). + * + * Refer to Documentation/power/devices.txt for more information about the role + * of the above callbacks in the system suspend process. * - * There also are the following callbacks related to run-time power management - * of devices: + * There also are callbacks related to runtime power management of devices. + * Again, these callbacks are executed by the PM core only for subsystems + * (PM domains, device types, classes and bus types) and the subsystem-level + * callbacks are supposed to invoke the driver callbacks. Moreover, the exact + * actions to be performed by a device driver's callbacks generally depend on + * the platform and subsystem the device belongs to. * * @runtime_suspend: Prepare the device for a condition in which it won't be * able to communicate with the CPU(s) and RAM due to power management. - * This need not mean that the device should be put into a low power state. + * This need not mean that the device should be put into a low-power state. * For example, if the device is behind a link which is about to be turned * off, the device may remain at full power. If the device does go to low - * power and is capable of generating run-time wake-up events, remote - * wake-up (i.e., a hardware mechanism allowing the device to request a - * change of its power state via a wake-up event, such as PCI PME) should - * be enabled for it. + * power and is capable of generating runtime wakeup events, remote wakeup + * (i.e., a hardware mechanism allowing the device to request a change of + * its power state via an interrupt) should be enabled for it. * * @runtime_resume: Put the device into the fully active state in response to a - * wake-up event generated by hardware or at the request of software. If - * necessary, put the device into the full power state and restore its + * wakeup event generated by hardware or at the request of software. If + * necessary, put the device into the full-power state and restore its * registers, so that it is fully operational. * - * @runtime_idle: Device appears to be inactive and it might be put into a low - * power state if all of the necessary conditions are satisfied. Check + * @runtime_idle: Device appears to be inactive and it might be put into a + * low-power state if all of the necessary conditions are satisfied. Check * these conditions and handle the device as appropriate, possibly queueing * a suspend request for it. The return value is ignored by the PM core. + * + * Refer to Documentation/power/runtime_pm.txt for more information about the + * role of the above callbacks in device runtime power management. + * */ struct dev_pm_ops { -- cgit v0.10.2 From 5cac98dd06bc43a7baab3523184f70fd359e9f35 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sun, 27 Nov 2011 21:14:46 +0000 Subject: net: Fix corruption in /proc/*/net/dev_mcast I just hit this during my testing. Isn't there another bug lurking? BUG kmalloc-8: Redzone overwritten INFO: 0xc0000000de9dec48-0xc0000000de9dec4b. First byte 0x0 instead of 0xcc INFO: Allocated in .__seq_open_private+0x30/0xa0 age=0 cpu=5 pid=3896 .__kmalloc+0x1e0/0x2d0 .__seq_open_private+0x30/0xa0 .seq_open_net+0x60/0xe0 .dev_mc_seq_open+0x4c/0x70 .proc_reg_open+0xd8/0x260 .__dentry_open.clone.11+0x2b8/0x400 .do_last+0xf4/0x950 .path_openat+0xf8/0x480 .do_filp_open+0x48/0xc0 .do_sys_open+0x140/0x250 syscall_exit+0x0/0x40 dev_mc_seq_ops uses dev_seq_start/next/stop but only allocates sizeof(struct seq_net_private) of private data, whereas it expects sizeof(struct dev_iter_state): struct dev_iter_state { struct seq_net_private p; unsigned int pos; /* bucket << BUCKET_SPACE + offset */ }; Create dev_seq_open_ops and use it so we don't have to expose struct dev_iter_state. [ Problem added by commit f04565ddf52e4 (dev: use name hash for dev_seq_ops) -Eric ] Signed-off-by: Anton Blanchard Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index cbeb586..a82ad4d 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2536,6 +2536,8 @@ extern void net_disable_timestamp(void); extern void *dev_seq_start(struct seq_file *seq, loff_t *pos); extern void *dev_seq_next(struct seq_file *seq, void *v, loff_t *pos); extern void dev_seq_stop(struct seq_file *seq, void *v); +extern int dev_seq_open_ops(struct inode *inode, struct file *file, + const struct seq_operations *ops); #endif extern int netdev_class_create_file(struct class_attribute *class_attr); diff --git a/net/core/dev.c b/net/core/dev.c index 6ba50a1..1482eea 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -4282,6 +4282,12 @@ static int dev_seq_open(struct inode *inode, struct file *file) sizeof(struct dev_iter_state)); } +int dev_seq_open_ops(struct inode *inode, struct file *file, + const struct seq_operations *ops) +{ + return seq_open_net(inode, file, ops, sizeof(struct dev_iter_state)); +} + static const struct file_operations dev_seq_fops = { .owner = THIS_MODULE, .open = dev_seq_open, diff --git a/net/core/dev_addr_lists.c b/net/core/dev_addr_lists.c index 277faef..febba51 100644 --- a/net/core/dev_addr_lists.c +++ b/net/core/dev_addr_lists.c @@ -696,8 +696,7 @@ static const struct seq_operations dev_mc_seq_ops = { static int dev_mc_seq_open(struct inode *inode, struct file *file) { - return seq_open_net(inode, file, &dev_mc_seq_ops, - sizeof(struct seq_net_private)); + return dev_seq_open_ops(inode, file, &dev_mc_seq_ops); } static const struct file_operations dev_mc_seq_fops = { -- cgit v0.10.2 From 2a38e6d5aed24bb7f0211e0819fac8c32c2b5791 Mon Sep 17 00:00:00 2001 From: Li Wei Date: Sun, 27 Nov 2011 21:33:34 +0000 Subject: ipv6: Set mcast_hops to IPV6_DEFAULT_MCASTHOPS when -1 was given. We need to set np->mcast_hops to it's default value at this moment otherwise when we use it and found it's value is -1, the logic to get default hop limit doesn't take multicast into account and will return wrong hop limit(IPV6_DEFAULT_HOPLIMIT) which is for unicast. Signed-off-by: Li Wei Signed-off-by: David S. Miller diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index c99e3ee..26cb08c 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -503,7 +503,7 @@ done: goto e_inval; if (val > 255 || val < -1) goto e_inval; - np->mcast_hops = val; + np->mcast_hops = (val == -1 ? IPV6_DEFAULT_MCASTHOPS : val); retv = 0; break; -- cgit v0.10.2 From eee628da2ee3cbba6f14696278c92a464239eea6 Mon Sep 17 00:00:00 2001 From: Christoph Fritz Date: Mon, 28 Nov 2011 23:49:33 +0100 Subject: efivars: add missing parameter to efi_pstore_read() In the case where CONFIG_PSTORE=n, the function efi_pstore_read() doesn't have the correct list of parameters. This patch provides a definition of efi_pstore_read() with 'char **buf' added to fix this warning: "drivers/firmware/efivars.c:609: warning: initialization from". problem introduced in commit f6f8285132907757ef84ef8dae0a1244b8cde6ac Signed-off-by: Christoph Fritz Signed-off-by: Tony Luck diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c index a54a6b9..b0a8117 100644 --- a/drivers/firmware/efivars.c +++ b/drivers/firmware/efivars.c @@ -581,7 +581,8 @@ static int efi_pstore_close(struct pstore_info *psi) } static ssize_t efi_pstore_read(u64 *id, enum pstore_type_id *type, - struct timespec *time, struct pstore_info *psi) + struct timespec *timespec, + char **buf, struct pstore_info *psi) { return -1; } -- cgit v0.10.2 -- cgit v0.10.2 From 58aa4ebe9c718f77f2003a9f815e070bdb4bff5e Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 16 Nov 2011 20:44:13 +0100 Subject: ARM: u300: update defconfig This updates the U300 defconfig to support some new drivers like FSMC, sets it to use the MMC clock gating scheme, and removes some stale config options. Signed-off-by: Linus Walleij diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index 4a5a126..374000e 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -14,8 +14,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_U300=y CONFIG_MACH_U300=y CONFIG_MACH_U300_BS335=y -CONFIG_MACH_U300_DUAL_RAM=y -CONFIG_U300_DEBUG=y CONFIG_MACH_U300_SPIDUMMY=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -26,19 +24,21 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072" CONFIG_CPU_IDLE=y CONFIG_FPE_NWFPE=y -CONFIG_PM=y # CONFIG_SUSPEND is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_MISC_DEVICES is not set +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_FSMC=y # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set +CONFIG_LEGACY_PTY_COUNT=16 CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_HW_RANDOM is not set CONFIG_I2C=y # CONFIG_HWMON is not set @@ -51,6 +51,7 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y +CONFIG_MMC_CLKGATE=y CONFIG_MMC_ARMMMCI=y CONFIG_RTC_CLASS=y # CONFIG_RTC_HCTOSYS is not set @@ -65,10 +66,8 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set CONFIG_TIMER_STATS=y # CONFIG_DEBUG_PREEMPT is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_CRC32 is not set -- cgit v0.10.2 From 6e2a587eb99267367409097b70cb2d61b09e5269 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 16 Nov 2011 20:30:35 +0100 Subject: ARM: ux500: update defconfig This updates the Ux500 defconfig with the new drivers for HWSEM and AB5500 core that were merged in the 3.2 cycle. Signed-off-by: Linus Walleij diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 97d31a4..2d7b6e7 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -10,7 +10,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_U8500=y CONFIG_UX500_SOC_DB5500=y CONFIG_UX500_SOC_DB8500=y -CONFIG_MACH_U8500=y +CONFIG_MACH_HREFV60=y CONFIG_MACH_SNOWBALL=y CONFIG_MACH_U5500=y CONFIG_NO_HZ=y @@ -24,6 +24,7 @@ CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_VFP=y CONFIG_NEON=y +CONFIG_PM_RUNTIME=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -41,11 +42,8 @@ CONFIG_MISC_DEVICES=y CONFIG_AB8500_PWM=y CONFIG_SENSORS_BH1780=y CONFIG_NETDEVICES=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y CONFIG_SMSC911X=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +CONFIG_SMSC_PHY=y # CONFIG_WLAN is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y @@ -72,15 +70,12 @@ CONFIG_SPI=y CONFIG_SPI_PL022=y CONFIG_GPIO_STMPE=y CONFIG_GPIO_TC3589X=y -# CONFIG_HWMON is not set CONFIG_MFD_STMPE=y CONFIG_MFD_TC3589X=y +CONFIG_AB5500_CORE=y CONFIG_AB8500_CORE=y CONFIG_REGULATOR_AB8500=y # CONFIG_HID_SUPPORT is not set -CONFIG_USB_MUSB_HDRC=y -CONFIG_USB_GADGET_MUSB_HDRC=y -CONFIG_MUSB_PIO_ONLY=y CONFIG_USB_GADGET=y CONFIG_AB8500_USB=y CONFIG_MMC=y @@ -97,6 +92,7 @@ CONFIG_DMADEVICES=y CONFIG_STE_DMA40=y CONFIG_STAGING=y CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y +CONFIG_HSEM_U8500=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y -- cgit v0.10.2 From d7fb6d0adb86ed1c5290e754092a5a1e3de76ee9 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Sun, 27 Nov 2011 20:16:33 -0600 Subject: of/irq: of_irq_init: add check for parent equal to child node With the revert of "of/irq: of_irq_find_parent: check for parent equal to child" (dc9372808412edb), we need another way to handle parent node equal to the child node. This can simply be handled in of_irq_init by checking for this condition. Signed-off-by: Rob Herring Tested-by: Pawel Moll Tested-by: Stephen Warren diff --git a/drivers/of/irq.c b/drivers/of/irq.c index 791270b..19c0115 100644 --- a/drivers/of/irq.c +++ b/drivers/of/irq.c @@ -424,6 +424,8 @@ void __init of_irq_init(const struct of_device_id *matches) desc->dev = np; desc->interrupt_parent = of_irq_find_parent(np); + if (desc->interrupt_parent == np) + desc->interrupt_parent = NULL; list_add_tail(&desc->list, &intc_desc_list); } -- cgit v0.10.2 From e43fce14088d9910b545c30c9a7127deb289d477 Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Tue, 8 Nov 2011 11:35:20 +0000 Subject: of: Add Silicon Image vendor prefix "sil" is the most commonly used abbreviation for Silicon Image products. Signed-off-by: Pawel Moll diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index e855278..874921e 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -33,6 +33,7 @@ qcom Qualcomm, Inc. ramtron Ramtron International samsung Samsung Semiconductor schindler Schindler +sil Silicon Image simtek sirf SiRF Technology, Inc. stericsson ST-Ericsson -- cgit v0.10.2 From c89304b8ea34ab48ba6ae10e06a8b1b8c8212307 Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Tue, 29 Nov 2011 09:26:30 +0000 Subject: sctp: better integer overflow check in sctp_auth_create_key() The check from commit 30c2235c is incomplete and cannot prevent cases like key_len = 0x80000000 (INT_MAX + 1). In that case, the left-hand side of the check (INT_MAX - key_len), which is unsigned, becomes 0xffffffff (UINT_MAX) and bypasses the check. However this shouldn't be a security issue. The function is called from the following two code paths: 1) setsockopt() 2) sctp_auth_asoc_set_secret() In case (1), sca_keylength is never going to exceed 65535 since it's bounded by a u16 from the user API. As such, the key length will never overflow. In case (2), sca_keylength is computed based on the user key (1 short) and 2 * key_vector (3 shorts) for a total of 7 * USHRT_MAX, which still will not overflow. In other words, this overflow check is not really necessary. Just make it more correct. Signed-off-by: Xi Wang Cc: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/net/sctp/auth.c b/net/sctp/auth.c index 865e68f..bf81204 100644 --- a/net/sctp/auth.c +++ b/net/sctp/auth.c @@ -82,7 +82,7 @@ static struct sctp_auth_bytes *sctp_auth_create_key(__u32 key_len, gfp_t gfp) struct sctp_auth_bytes *key; /* Verify that we are not going to overflow INT_MAX */ - if ((INT_MAX - key_len) < sizeof(struct sctp_auth_bytes)) + if (key_len > (INT_MAX - sizeof(struct sctp_auth_bytes))) return NULL; /* Allocate the shared key */ -- cgit v0.10.2 From 3874397c0bdec3c21ce071711cd105165179b8eb Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Mon, 21 Nov 2011 08:43:54 -0500 Subject: IB/ipoib: Prevent hung task or softlockup processing multicast response This following can occur with ipoib when processing a multicast reponse: BUG: soft lockup - CPU#0 stuck for 67s! [ib_mad1:982] Modules linked in: ... CPU 0: Modules linked in: ... Pid: 982, comm: ib_mad1 Not tainted 2.6.32-131.0.15.el6.x86_64 #1 ProLiant DL160 G5 RIP: 0010:[] [] _spin_unlock_irqrestore+0x17/0x20 RSP: 0018:ffff8802119ed860 EFLAGS: 00000246 0000000000000004 RBX: ffff8802119ed860 RCX: 000000000000a299 RDX: ffff88021086c700 RSI: 0000000000000246 RDI: 0000000000000246 RBP: ffffffff8100bc8e R08: ffff880210ac229c R09: 0000000000000000 R10: ffff88021278aab8 R11: 0000000000000000 R12: ffff8802119ed860 R13: ffffffff8100be6e R14: 0000000000000001 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff880028200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00000000006d4840 CR3: 0000000209aa5000 CR4: 00000000000406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: [] ? ipoib_mcast_send+0x157/0x480 [ib_ipoib] [] ? apic_timer_interrupt+0xe/0x20 [] ? apic_timer_interrupt+0xe/0x20 [] ? ipoib_path_lookup+0x124/0x2d0 [ib_ipoib] [] ? ipoib_start_xmit+0x17c/0x430 [ib_ipoib] [] ? dev_hard_start_xmit+0x2c8/0x3f0 [] ? sch_direct_xmit+0x15a/0x1c0 [] ? dev_queue_xmit+0x388/0x4d0 [] ? ipoib_mcast_join_finish+0x2c7/0x510 [ib_ipoib] [] ? ipoib_mcast_sendonly_join_complete+0x1b8/0x1f0 [ib_ipoib] [] ? mcast_work_handler+0x1a6/0x710 [ib_sa] [] ? ib_send_mad+0xfe/0x3c0 [ib_mad] [] ? ib_get_cached_lmc+0xa3/0xb0 [ib_core] [] ? join_handler+0xeb/0x200 [ib_sa] [] ? ib_sa_mcmember_rec_callback+0x5c/0xa0 [ib_sa] [] ? recv_handler+0x3c/0x70 [ib_sa] [] ? ib_mad_completion_handler+0x844/0x9d0 [ib_mad] [] ? ib_mad_completion_handler+0x0/0x9d0 [ib_mad] [] ? worker_thread+0x170/0x2a0 [] ? autoremove_wake_function+0x0/0x40 [] ? worker_thread+0x0/0x2a0 [] ? kthread+0x96/0xa0 [] ? child_rip+0xa/0x20 Coinciding with stack trace is the following message: ib0: ib_address_create failed The code below in ipoib_mcast_join_finish() will note the above failure in the address handle but otherwise continue: ah = ipoib_create_ah(dev, priv->pd, &av); if (!ah) { ipoib_warn(priv, "ib_address_create failed\n"); } else { The while loop at the bottom of ipoib_mcast_join_finish() will attempt to send queued multicast packets in mcast->pkt_queue and eventually end up in ipoib_mcast_send(): if (!mcast->ah) { if (skb_queue_len(&mcast->pkt_queue) < IPOIB_MAX_MCAST_QUEUE) skb_queue_tail(&mcast->pkt_queue, skb); else { ++dev->stats.tx_dropped; dev_kfree_skb_any(skb); } My read is that the code will requeue the packet and return to the ipoib_mcast_join_finish() while loop and the stage is set for the "hung" task diagnostic as the while loop never sees a non-NULL ah, and will do nothing to resolve. There are GFP_ATOMIC allocates in the provider routines, so this is possible and should be dealt with. The test that induced the failure is associated with a host SM on the same server during a shutdown. This patch causes ipoib_mcast_join_finish() to exit with an error which will flush the queued mcast packets. Nothing is done to unwind the QP attached state so that subsequent sends from above will retry the join. Reviewed-by: Ram Vepa Reviewed-by: Gary Leshner Signed-off-by: Mike Marciniszyn Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c index 0ef9af9..4115be5 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -57,21 +57,24 @@ struct ipoib_ah *ipoib_create_ah(struct net_device *dev, struct ib_pd *pd, struct ib_ah_attr *attr) { struct ipoib_ah *ah; + struct ib_ah *vah; ah = kmalloc(sizeof *ah, GFP_KERNEL); if (!ah) - return NULL; + return ERR_PTR(-ENOMEM); ah->dev = dev; ah->last_send = 0; kref_init(&ah->ref); - ah->ah = ib_create_ah(pd, attr); - if (IS_ERR(ah->ah)) { + vah = ib_create_ah(pd, attr); + if (IS_ERR(vah)) { kfree(ah); - ah = NULL; - } else + ah = (struct ipoib_ah *)vah; + } else { + ah->ah = vah; ipoib_dbg(netdev_priv(dev), "Created ah %p\n", ah->ah); + } return ah; } diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 7567b60..37c46c6 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -432,7 +432,7 @@ static void path_rec_completion(int status, spin_lock_irqsave(&priv->lock, flags); - if (ah) { + if (!IS_ERR_OR_NULL(ah)) { path->pathrec = *pathrec; old_ah = path->ah; diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index 1b7a976..30ca8f0 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -240,8 +240,11 @@ static int ipoib_mcast_join_finish(struct ipoib_mcast *mcast, av.grh.dgid = mcast->mcmember.mgid; ah = ipoib_create_ah(dev, priv->pd, &av); - if (!ah) { - ipoib_warn(priv, "ib_address_create failed\n"); + if (IS_ERR(ah)) { + ipoib_warn(priv, "ib_address_create failed %ld\n", + -PTR_ERR(ah)); + /* use original error */ + return PTR_ERR(ah); } else { spin_lock_irq(&priv->lock); mcast->ah = ah; -- cgit v0.10.2 From 580da35a31f91a594f3090b7a2c39b85cb051a12 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 29 Nov 2011 22:31:23 +0100 Subject: IB: Fix RCU lockdep splats Commit f2c31e32b37 ("net: fix NULL dereferences in check_peer_redir()") forgot to take care of infiniband uses of dst neighbours. Many thanks to Marc Aurele who provided a nice bug report and feedback. Reported-by: Marc Aurele La France Signed-off-by: Eric Dumazet Cc: David Miller Cc: Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c index 691276b..e9cf51b 100644 --- a/drivers/infiniband/core/addr.c +++ b/drivers/infiniband/core/addr.c @@ -216,7 +216,9 @@ static int addr4_resolve(struct sockaddr_in *src_in, neigh = neigh_lookup(&arp_tbl, &rt->rt_gateway, rt->dst.dev); if (!neigh || !(neigh->nud_state & NUD_VALID)) { + rcu_read_lock(); neigh_event_send(dst_get_neighbour(&rt->dst), NULL); + rcu_read_unlock(); ret = -ENODATA; if (neigh) goto release; @@ -274,15 +276,16 @@ static int addr6_resolve(struct sockaddr_in6 *src_in, goto put; } + rcu_read_lock(); neigh = dst_get_neighbour(dst); if (!neigh || !(neigh->nud_state & NUD_VALID)) { if (neigh) neigh_event_send(neigh, NULL); ret = -ENODATA; - goto put; + } else { + ret = rdma_copy_addr(addr, dst->dev, neigh->ha); } - - ret = rdma_copy_addr(addr, dst->dev, neigh->ha); + rcu_read_unlock(); put: dst_release(dst); return ret; diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c index de6d077..c88b12b 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_cm.c +++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c @@ -1375,8 +1375,10 @@ static int pass_accept_req(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) goto reject; } dst = &rt->dst; + rcu_read_lock(); neigh = dst_get_neighbour(dst); l2t = t3_l2t_get(tdev, neigh, neigh->dev); + rcu_read_unlock(); if (!l2t) { printk(KERN_ERR MOD "%s - failed to allocate l2t entry!\n", __func__); @@ -1946,10 +1948,12 @@ int iwch_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) } ep->dst = &rt->dst; + rcu_read_lock(); neigh = dst_get_neighbour(ep->dst); /* get a l2t entry */ ep->l2t = t3_l2t_get(ep->com.tdev, neigh, neigh->dev); + rcu_read_unlock(); if (!ep->l2t) { printk(KERN_ERR MOD "%s - cannot alloc l2e.\n", __func__); err = -ENOMEM; diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index b36cdac..75b57bee 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -1594,6 +1594,7 @@ static int pass_accept_req(struct c4iw_dev *dev, struct sk_buff *skb) goto reject; } dst = &rt->dst; + rcu_read_lock(); neigh = dst_get_neighbour(dst); if (neigh->dev->flags & IFF_LOOPBACK) { pdev = ip_dev_find(&init_net, peer_ip); @@ -1620,6 +1621,7 @@ static int pass_accept_req(struct c4iw_dev *dev, struct sk_buff *skb) rss_qid = dev->rdev.lldi.rxq_ids[ cxgb4_port_idx(neigh->dev) * step]; } + rcu_read_unlock(); if (!l2t) { printk(KERN_ERR MOD "%s - failed to allocate l2t entry!\n", __func__); @@ -1820,6 +1822,7 @@ static int c4iw_reconnect(struct c4iw_ep *ep) } ep->dst = &rt->dst; + rcu_read_lock(); neigh = dst_get_neighbour(ep->dst); /* get a l2t entry */ @@ -1856,6 +1859,7 @@ static int c4iw_reconnect(struct c4iw_ep *ep) ep->rss_qid = ep->com.dev->rdev.lldi.rxq_ids[ cxgb4_port_idx(neigh->dev) * step]; } + rcu_read_unlock(); if (!ep->l2t) { printk(KERN_ERR MOD "%s - cannot alloc l2e.\n", __func__); err = -ENOMEM; @@ -2301,6 +2305,7 @@ int c4iw_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) } ep->dst = &rt->dst; + rcu_read_lock(); neigh = dst_get_neighbour(ep->dst); /* get a l2t entry */ @@ -2339,6 +2344,7 @@ int c4iw_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) ep->retry_with_mpa_v1 = 0; ep->tried_with_mpa_v1 = 0; } + rcu_read_unlock(); if (!ep->l2t) { printk(KERN_ERR MOD "%s - cannot alloc l2e.\n", __func__); err = -ENOMEM; diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index dfce9ea..0a52d72 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -1377,9 +1377,11 @@ static int nes_addr_resolve_neigh(struct nes_vnic *nesvnic, u32 dst_ip, int arpi neigh_release(neigh); } - if ((neigh == NULL) || (!(neigh->nud_state & NUD_VALID))) + if ((neigh == NULL) || (!(neigh->nud_state & NUD_VALID))) { + rcu_read_lock(); neigh_event_send(dst_get_neighbour(&rt->dst), NULL); - + rcu_read_unlock(); + } ip_rt_put(rt); return rc; } diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 7567b60..ef38848 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -555,6 +555,7 @@ static int path_rec_start(struct net_device *dev, return 0; } +/* called with rcu_read_lock */ static void neigh_add_path(struct sk_buff *skb, struct net_device *dev) { struct ipoib_dev_priv *priv = netdev_priv(dev); @@ -636,6 +637,7 @@ err_drop: spin_unlock_irqrestore(&priv->lock, flags); } +/* called with rcu_read_lock */ static void ipoib_path_lookup(struct sk_buff *skb, struct net_device *dev) { struct ipoib_dev_priv *priv = netdev_priv(skb->dev); @@ -720,13 +722,14 @@ static int ipoib_start_xmit(struct sk_buff *skb, struct net_device *dev) struct neighbour *n = NULL; unsigned long flags; + rcu_read_lock(); if (likely(skb_dst(skb))) n = dst_get_neighbour(skb_dst(skb)); if (likely(n)) { if (unlikely(!*to_ipoib_neigh(n))) { ipoib_path_lookup(skb, dev); - return NETDEV_TX_OK; + goto unlock; } neigh = *to_ipoib_neigh(n); @@ -749,17 +752,17 @@ static int ipoib_start_xmit(struct sk_buff *skb, struct net_device *dev) ipoib_neigh_free(dev, neigh); spin_unlock_irqrestore(&priv->lock, flags); ipoib_path_lookup(skb, dev); - return NETDEV_TX_OK; + goto unlock; } if (ipoib_cm_get(neigh)) { if (ipoib_cm_up(neigh)) { ipoib_cm_send(dev, skb, ipoib_cm_get(neigh)); - return NETDEV_TX_OK; + goto unlock; } } else if (neigh->ah) { ipoib_send(dev, skb, neigh->ah, IPOIB_QPN(n->ha)); - return NETDEV_TX_OK; + goto unlock; } if (skb_queue_len(&neigh->queue) < IPOIB_MAX_PATH_REC_QUEUE) { @@ -793,13 +796,14 @@ static int ipoib_start_xmit(struct sk_buff *skb, struct net_device *dev) phdr->hwaddr + 4); dev_kfree_skb_any(skb); ++dev->stats.tx_dropped; - return NETDEV_TX_OK; + goto unlock; } unicast_arp_send(skb, dev, phdr); } } - +unlock: + rcu_read_unlock(); return NETDEV_TX_OK; } @@ -837,7 +841,7 @@ static int ipoib_hard_header(struct sk_buff *skb, dst = skb_dst(skb); n = NULL; if (dst) - n = dst_get_neighbour(dst); + n = dst_get_neighbour_raw(dst); if ((!dst || !n) && daddr) { struct ipoib_pseudoheader *phdr = (struct ipoib_pseudoheader *) skb_push(skb, sizeof *phdr); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index 1b7a976..cad1894 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -266,7 +266,7 @@ static int ipoib_mcast_join_finish(struct ipoib_mcast *mcast, skb->dev = dev; if (dst) - n = dst_get_neighbour(dst); + n = dst_get_neighbour_raw(dst); if (!dst || !n) { /* put pseudoheader back on for next time */ skb_push(skb, sizeof (struct ipoib_pseudoheader)); @@ -722,6 +722,8 @@ out: if (mcast && mcast->ah) { struct dst_entry *dst = skb_dst(skb); struct neighbour *n = NULL; + + rcu_read_lock(); if (dst) n = dst_get_neighbour(dst); if (n && !*to_ipoib_neigh(n)) { @@ -734,7 +736,7 @@ out: list_add_tail(&neigh->list, &mcast->neigh_list); } } - + rcu_read_unlock(); spin_unlock_irqrestore(&priv->lock, flags); ipoib_send(dev, skb, mcast->ah, IB_MULTICAST_QPN); return; -- cgit v0.10.2 From 1281bc256543eb610b14fa95ce1967397931a120 Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Tue, 29 Nov 2011 10:10:54 +0000 Subject: netlabel: Fix build problems when IPv6 is not enabled A recent fix to the the NetLabel code caused build problem with configurations that did not have IPv6 enabled; see below: netlabel_kapi.c: In function 'netlbl_cfg_unlbl_map_add': netlabel_kapi.c:165:4: error: implicit declaration of function 'netlbl_af6list_add' This patch fixes this problem by making the IPv6 specific code conditional on the IPv6 configuration flags as we done in the rest of NetLabel and the network stack as a whole. We have to move some variable declarations around as a result so things may not be quite as pretty, but at least it builds cleanly now. Some additional IPv6 conditionals were added to the NetLabel code as well for the sake of consistency. Reported-by: Randy Dunlap Signed-off-by: Paul Moore Acked-by: Randy Dunlap Signed-off-by: David S. Miller diff --git a/net/netlabel/netlabel_kapi.c b/net/netlabel/netlabel_kapi.c index 7b372a7..824f184 100644 --- a/net/netlabel/netlabel_kapi.c +++ b/net/netlabel/netlabel_kapi.c @@ -111,8 +111,6 @@ int netlbl_cfg_unlbl_map_add(const char *domain, struct netlbl_domaddr_map *addrmap = NULL; struct netlbl_domaddr4_map *map4 = NULL; struct netlbl_domaddr6_map *map6 = NULL; - const struct in_addr *addr4, *mask4; - const struct in6_addr *addr6, *mask6; entry = kzalloc(sizeof(*entry), GFP_ATOMIC); if (entry == NULL) @@ -133,9 +131,9 @@ int netlbl_cfg_unlbl_map_add(const char *domain, INIT_LIST_HEAD(&addrmap->list6); switch (family) { - case AF_INET: - addr4 = addr; - mask4 = mask; + case AF_INET: { + const struct in_addr *addr4 = addr; + const struct in_addr *mask4 = mask; map4 = kzalloc(sizeof(*map4), GFP_ATOMIC); if (map4 == NULL) goto cfg_unlbl_map_add_failure; @@ -148,9 +146,11 @@ int netlbl_cfg_unlbl_map_add(const char *domain, if (ret_val != 0) goto cfg_unlbl_map_add_failure; break; - case AF_INET6: - addr6 = addr; - mask6 = mask; + } +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) + case AF_INET6: { + const struct in6_addr *addr6 = addr; + const struct in6_addr *mask6 = mask; map6 = kzalloc(sizeof(*map6), GFP_ATOMIC); if (map6 == NULL) goto cfg_unlbl_map_add_failure; @@ -167,6 +167,8 @@ int netlbl_cfg_unlbl_map_add(const char *domain, if (ret_val != 0) goto cfg_unlbl_map_add_failure; break; + } +#endif /* IPv6 */ default: goto cfg_unlbl_map_add_failure; break; @@ -225,9 +227,11 @@ int netlbl_cfg_unlbl_static_add(struct net *net, case AF_INET: addr_len = sizeof(struct in_addr); break; +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) case AF_INET6: addr_len = sizeof(struct in6_addr); break; +#endif /* IPv6 */ default: return -EPFNOSUPPORT; } @@ -266,9 +270,11 @@ int netlbl_cfg_unlbl_static_del(struct net *net, case AF_INET: addr_len = sizeof(struct in_addr); break; +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) case AF_INET6: addr_len = sizeof(struct in6_addr); break; +#endif /* IPv6 */ default: return -EPFNOSUPPORT; } -- cgit v0.10.2 From 746ae30f821a8533ffba7769e492f59a96fdbeec Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 24 Nov 2011 02:41:49 +0000 Subject: isdn: make sure strings are null terminated These strings come from the user. We strcpy() them inside cf_command() so we should check that they are NULL terminated and return an error if not. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller diff --git a/drivers/isdn/divert/divert_procfs.c b/drivers/isdn/divert/divert_procfs.c index 33ec9e4..9021182 100644 --- a/drivers/isdn/divert/divert_procfs.c +++ b/drivers/isdn/divert/divert_procfs.c @@ -242,6 +242,12 @@ static int isdn_divert_ioctl_unlocked(struct file *file, uint cmd, ulong arg) case IIOCDOCFINT: if (!divert_if.drv_to_name(dioctl.cf_ctrl.drvid)) return (-EINVAL); /* invalid driver */ + if (strnlen(dioctl.cf_ctrl.msn, sizeof(dioctl.cf_ctrl.msn)) == + sizeof(dioctl.cf_ctrl.msn)) + return -EINVAL; + if (strnlen(dioctl.cf_ctrl.fwd_nr, sizeof(dioctl.cf_ctrl.fwd_nr)) == + sizeof(dioctl.cf_ctrl.fwd_nr)) + return -EINVAL; if ((i = cf_command(dioctl.cf_ctrl.drvid, (cmd == IIOCDOCFACT) ? 1 : (cmd == IIOCDOCFDIS) ? 0 : 2, dioctl.cf_ctrl.cfproc, -- cgit v0.10.2 From 5dc5503f5a400be5a7dc611745a034f04b0679b8 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 24 Nov 2011 02:42:09 +0000 Subject: isdn: avoid copying too long drvid "cfg->drvid" comes from the user so there is a possibility they didn't NUL terminate it properly. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c index 1f73d7f..2339d73 100644 --- a/drivers/isdn/i4l/isdn_net.c +++ b/drivers/isdn/i4l/isdn_net.c @@ -2756,6 +2756,9 @@ isdn_net_setcfg(isdn_net_ioctl_cfg * cfg) char *c, *e; + if (strnlen(cfg->drvid, sizeof(cfg->drvid)) == + sizeof(cfg->drvid)) + return -EINVAL; drvidx = -1; chidx = -1; strcpy(drvid, cfg->drvid); -- cgit v0.10.2 From 26bdef541d26fd6a5ddffdf8949ace22f94f809f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 16 Nov 2011 11:28:01 +0300 Subject: btrfs scrub: handle -ENOMEM from init_ipath() init_ipath() can return an ERR_PTR(-ENOMEM). Signed-off-by: Dan Carpenter diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c index fab420d..c27bcb6 100644 --- a/fs/btrfs/scrub.c +++ b/fs/btrfs/scrub.c @@ -256,6 +256,11 @@ static int scrub_print_warning_inode(u64 inum, u64 offset, u64 root, void *ctx) btrfs_release_path(swarn->path); ipath = init_ipath(4096, local_root, swarn->path); + if (IS_ERR(ipath)) { + ret = PTR_ERR(ipath); + ipath = NULL; + goto err; + } ret = paths_from_inode(inum, ipath); if (ret < 0) -- cgit v0.10.2 From b52f75a595e8a70ee453bd6fb8023ee294f7a729 Mon Sep 17 00:00:00 2001 From: Arnd Hannemann Date: Wed, 16 Nov 2011 17:35:37 +0100 Subject: Fix URL of btrfs-progs git repository in docs The location of the btrfs-progs repository has been changed. This patch updates the documentation accordingly. Signed-off-by: Arnd Hannemann diff --git a/Documentation/filesystems/btrfs.txt b/Documentation/filesystems/btrfs.txt index 64087c3..7671352 100644 --- a/Documentation/filesystems/btrfs.txt +++ b/Documentation/filesystems/btrfs.txt @@ -63,8 +63,8 @@ IRC network. Userspace tools for creating and manipulating Btrfs file systems are available from the git repository at the following location: - http://git.kernel.org/?p=linux/kernel/git/mason/btrfs-progs-unstable.git - git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-progs-unstable.git + http://git.kernel.org/?p=linux/kernel/git/mason/btrfs-progs.git + git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-progs.git These include the following tools: -- cgit v0.10.2 From aa38a711a893accf5b5192f3d705a120deaa81e0 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Fri, 18 Nov 2011 17:43:00 +0800 Subject: Btrfs: fix deadlock on metadata reservation when evicting a inode When I ran the xfstests, I found the test tasks was blocked on meta-data reservation. By debugging, I found the reason of this bug: start transaction | v reserve meta-data space | v flush delay allocation -> iput inode -> evict inode ^ | | v wait for delay allocation flush <- reserve meta-data space And besides that, the flush on evicting inode will block the thread, which is reclaiming the memory, and make oom happen easily. Fix this bug by skipping the flush step when evicting inode. Signed-off-by: Miao Xie diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 04a5dfc..50634abe 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -2369,6 +2369,9 @@ int btrfs_block_rsv_check(struct btrfs_root *root, int btrfs_block_rsv_refill(struct btrfs_root *root, struct btrfs_block_rsv *block_rsv, u64 min_reserved); +int btrfs_block_rsv_refill_noflush(struct btrfs_root *root, + struct btrfs_block_rsv *block_rsv, + u64 min_reserved); int btrfs_block_rsv_migrate(struct btrfs_block_rsv *src_rsv, struct btrfs_block_rsv *dst_rsv, u64 num_bytes); diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 5d86877..b7e5f68 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -3887,9 +3887,9 @@ int btrfs_block_rsv_check(struct btrfs_root *root, return ret; } -int btrfs_block_rsv_refill(struct btrfs_root *root, - struct btrfs_block_rsv *block_rsv, - u64 min_reserved) +static inline int __btrfs_block_rsv_refill(struct btrfs_root *root, + struct btrfs_block_rsv *block_rsv, + u64 min_reserved, int flush) { u64 num_bytes = 0; int ret = -ENOSPC; @@ -3908,7 +3908,7 @@ int btrfs_block_rsv_refill(struct btrfs_root *root, if (!ret) return 0; - ret = reserve_metadata_bytes(root, block_rsv, num_bytes, 1); + ret = reserve_metadata_bytes(root, block_rsv, num_bytes, flush); if (!ret) { block_rsv_add_bytes(block_rsv, num_bytes, 0); return 0; @@ -3917,6 +3917,20 @@ int btrfs_block_rsv_refill(struct btrfs_root *root, return ret; } +int btrfs_block_rsv_refill(struct btrfs_root *root, + struct btrfs_block_rsv *block_rsv, + u64 min_reserved) +{ + return __btrfs_block_rsv_refill(root, block_rsv, min_reserved, 1); +} + +int btrfs_block_rsv_refill_noflush(struct btrfs_root *root, + struct btrfs_block_rsv *block_rsv, + u64 min_reserved) +{ + return __btrfs_block_rsv_refill(root, block_rsv, min_reserved, 0); +} + int btrfs_block_rsv_migrate(struct btrfs_block_rsv *src_rsv, struct btrfs_block_rsv *dst_rsv, u64 num_bytes) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 8ad26b1..c5ccec2 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -3490,7 +3490,7 @@ void btrfs_evict_inode(struct inode *inode) * doing the truncate. */ while (1) { - ret = btrfs_block_rsv_refill(root, rsv, min_size); + ret = btrfs_block_rsv_refill_noflush(root, rsv, min_size); /* * Try and steal from the global reserve since we will -- cgit v0.10.2 From ece7d20e8be6730fbb29f4550de6b19b1a3a9387 Mon Sep 17 00:00:00 2001 From: Mike Fleetwood Date: Fri, 18 Nov 2011 18:55:01 +0000 Subject: Btrfs: Don't error on resizing FS to same size It seems overly harsh to fail a resize of a btrfs file system to the same size when a shrink or grow would succeed. User app GParted trips over this error. Allow it by bypassing the shrink or grow operation. Signed-off-by: Mike Fleetwood diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index a90e749..72d4616 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1278,7 +1278,7 @@ static noinline int btrfs_ioctl_resize(struct btrfs_root *root, } ret = btrfs_grow_device(trans, device, new_size); btrfs_commit_transaction(trans, root); - } else { + } else if (new_size < old_size) { ret = btrfs_shrink_device(device, new_size); } -- cgit v0.10.2 From b772a86ea6d932ac29d5e50e67c977653c832f8a Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Mon, 28 Nov 2011 16:43:00 +0800 Subject: Btrfs: fix oops when calling statfs on readonly device To reproduce this bug: # dd if=/dev/zero of=img bs=1M count=256 # mkfs.btrfs img # losetup -r /dev/loop1 img # mount /dev/loop1 /mnt OOPS!! It triggered BUG_ON(!nr_devices) in btrfs_calc_avail_data_space(). To fix this, instead of checking write-only devices, we check all open deivces: # df -h /dev/loop1 Filesystem Size Used Avail Use% Mounted on /dev/loop1 250M 28K 238M 1% /mnt Signed-off-by: Li Zefan diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 8bd9d6d..1a3ce9e 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -1083,7 +1083,7 @@ static int btrfs_calc_avail_data_space(struct btrfs_root *root, u64 *free_bytes) int i = 0, nr_devices; int ret; - nr_devices = fs_info->fs_devices->rw_devices; + nr_devices = fs_info->fs_devices->open_devices; BUG_ON(!nr_devices); devices_info = kmalloc(sizeof(*devices_info) * nr_devices, @@ -1105,8 +1105,8 @@ static int btrfs_calc_avail_data_space(struct btrfs_root *root, u64 *free_bytes) else min_stripe_size = BTRFS_STRIPE_LEN; - list_for_each_entry(device, &fs_devices->alloc_list, dev_alloc_list) { - if (!device->in_fs_metadata) + list_for_each_entry(device, &fs_devices->devices, dev_list) { + if (!device->in_fs_metadata || !device->bdev) continue; avail_space = device->total_bytes - device->bytes_used; -- cgit v0.10.2 From f2d0f6765d6332f9be732965a0c6f3b8a55082b4 Mon Sep 17 00:00:00 2001 From: Alexandre Oliva Date: Mon, 28 Nov 2011 12:04:43 -0200 Subject: Btrfs: initialize new bitmaps' list We're failing to create clusters with bitmaps because setup_cluster_no_bitmap checks that the list is empty before inserting the bitmap entry in the list for setup_cluster_bitmap, but the list field is only initialized when it is restored from the on-disk free space cache, or when it is written out to disk. Besides a potential race condition due to the multiple use of the list field, filesystem performance severely degrades over time: as we use up all non-bitmap free extents, the try-to-set-up-cluster dance is done at every metadata block allocation. For every block group, we fail to set up a cluster, and after failing on them all up to twice, we fall back to the much slower unclustered allocation. To make matters worse, before the unclustered allocation, we try to create new block groups until we reach the 1% threshold, which introduces additional bitmaps and thus block groups that we'll iterate over at each metadata block request. diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 6e5b7e4..ff179b1 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -1470,6 +1470,7 @@ static void add_new_bitmap(struct btrfs_free_space_ctl *ctl, { info->offset = offset_to_bitmap(ctl, offset); info->bytes = 0; + INIT_LIST_HEAD(&info->list); link_free_space(ctl, info); ctl->total_bitmaps++; -- cgit v0.10.2 From b78d09bceb524ee6481c21b77bda22d766b10e6a Mon Sep 17 00:00:00 2001 From: Alexandre Oliva Date: Wed, 30 Nov 2011 13:43:00 -0500 Subject: Btrfs: reset cluster's max_size when creating bitmap The field that indicates the size of the largest contiguous chunk of free space in the cluster is not initialized when setting up bitmaps, it's only increased when we find a larger contiguous chunk. We end up retaining a larger value than appropriate for highly-fragmented clusters, which may cause pointless searches for large contiguous groups, and even cause clusters that do not meet the density requirements to be set up. Signed-off-by: Alexandre Oliva Signed-off-by: Chris Mason diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index ff179b1..ec23d43 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -2320,6 +2320,7 @@ again: if (!found) { start = i; + cluster->max_size = 0; found = true; } -- cgit v0.10.2 From 1b22bad779be7fe07242be04749ec969164528b8 Mon Sep 17 00:00:00 2001 From: Alexandre Oliva Date: Wed, 30 Nov 2011 13:43:00 -0500 Subject: Btrfs: start search for new cluster at the beginning Instead of starting at zero (offset is always zero), request a cluster starting at search_start, that denotes the beginning of the current block group. Signed-off-by: Alexandre Oliva Signed-off-by: Chris Mason diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index b7e5f68..97c1206 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -5301,10 +5301,8 @@ alloc: spin_lock(&last_ptr->refill_lock); if (last_ptr->block_group && (last_ptr->block_group->ro || - !block_group_bits(last_ptr->block_group, data))) { - offset = 0; + !block_group_bits(last_ptr->block_group, data))) goto refill_cluster; - } offset = btrfs_alloc_from_cluster(block_group, last_ptr, num_bytes, search_start); @@ -5355,7 +5353,7 @@ refill_cluster: /* allocate a cluster in this block group */ ret = btrfs_find_space_cluster(trans, root, block_group, last_ptr, - offset, num_bytes, + search_start, num_bytes, empty_cluster + empty_size); if (ret == 0) { /* -- cgit v0.10.2 From 425d83156ca27f74e2cc3f370138038c3c8947f8 Mon Sep 17 00:00:00 2001 From: Alexandre Oliva Date: Wed, 30 Nov 2011 13:43:00 -0500 Subject: Btrfs: skip block groups without enough space for a cluster We test whether a block group has enough free space to hold the requested block, but when we're doing clustered allocation, we can save some cycles by testing whether it has enough room for the cluster upfront, otherwise we end up attempting to set up a cluster and failing. Only in the NO_EMPTY_SIZE loop do we attempt an unclustered allocation, and by then we'll have zeroed the cluster size, so this patch won't stop us from using the block group as a last resort. Signed-off-by: Alexandre Oliva Signed-off-by: Chris Mason diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 97c1206..71c8e70 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -5278,7 +5278,7 @@ alloc: spin_lock(&block_group->free_space_ctl->tree_lock); if (cached && block_group->free_space_ctl->free_space < - num_bytes + empty_size) { + num_bytes + empty_cluster + empty_size) { spin_unlock(&block_group->free_space_ctl->tree_lock); goto loop; } -- cgit v0.10.2 From be064d113906f04ea13088a8260e1e68ae0a4050 Mon Sep 17 00:00:00 2001 From: Alexandre Oliva Date: Wed, 30 Nov 2011 13:43:00 -0500 Subject: Btrfs: skip allocation attempt from empty cluster If we don't have a cluster, don't bother trying to allocate from it, jumping right away to the attempt to allocate a new cluster. Signed-off-by: Alexandre Oliva Signed-off-by: Chris Mason diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 71c8e70..813c6bb 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -5299,9 +5299,9 @@ alloc: * people trying to start a new cluster */ spin_lock(&last_ptr->refill_lock); - if (last_ptr->block_group && - (last_ptr->block_group->ro || - !block_group_bits(last_ptr->block_group, data))) + if (!last_ptr->block_group || + last_ptr->block_group->ro || + !block_group_bits(last_ptr->block_group, data)) goto refill_cluster; offset = btrfs_alloc_from_cluster(block_group, last_ptr, -- cgit v0.10.2 From 15fc1f3617edea50fa58703d59f73e726377bc63 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 30 Nov 2011 17:07:21 -0500 Subject: net: fec: Select the FEC driver by default for i.MX SoCs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since commit 230dec6 (net/fec: add imx6q enet support) the FEC driver is no longer built by default for i.MX SoCs. Let the FEC driver be built by default again. Signed-off-by: Fabio Estevam Suggested-by: Uwe Kleine-König Acked-by: Uwe Kleine-König Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig index c520cfd..5272f9d 100644 --- a/drivers/net/ethernet/freescale/Kconfig +++ b/drivers/net/ethernet/freescale/Kconfig @@ -24,6 +24,7 @@ config FEC bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)" depends on (M523x || M527x || M5272 || M528x || M520x || M532x || \ ARCH_MXC || ARCH_MXS) + default ARCH_MXC || ARCH_MXS if ARM select PHYLIB ---help--- Say Y here if you want to use the built-in 10/100 Fast ethernet -- cgit v0.10.2 From f7e57044eeb1841847c24aa06766c8290c202583 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 30 Nov 2011 04:08:58 +0000 Subject: sch_teql: fix lockdep splat We need rcu_read_lock() protection before using dst_get_neighbour(), and we must cache its value (pass it to __teql_resolve()) teql_master_xmit() is called under rcu_read_lock_bh() protection, its not enough. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c index a3b7120..4f4c52c 100644 --- a/net/sched/sch_teql.c +++ b/net/sched/sch_teql.c @@ -225,11 +225,11 @@ static int teql_qdisc_init(struct Qdisc *sch, struct nlattr *opt) static int -__teql_resolve(struct sk_buff *skb, struct sk_buff *skb_res, struct net_device *dev) +__teql_resolve(struct sk_buff *skb, struct sk_buff *skb_res, + struct net_device *dev, struct netdev_queue *txq, + struct neighbour *mn) { - struct netdev_queue *dev_queue = netdev_get_tx_queue(dev, 0); - struct teql_sched_data *q = qdisc_priv(dev_queue->qdisc); - struct neighbour *mn = dst_get_neighbour(skb_dst(skb)); + struct teql_sched_data *q = qdisc_priv(txq->qdisc); struct neighbour *n = q->ncache; if (mn->tbl == NULL) @@ -262,17 +262,26 @@ __teql_resolve(struct sk_buff *skb, struct sk_buff *skb_res, struct net_device * } static inline int teql_resolve(struct sk_buff *skb, - struct sk_buff *skb_res, struct net_device *dev) + struct sk_buff *skb_res, + struct net_device *dev, + struct netdev_queue *txq) { - struct netdev_queue *txq = netdev_get_tx_queue(dev, 0); + struct dst_entry *dst = skb_dst(skb); + struct neighbour *mn; + int res; + if (txq->qdisc == &noop_qdisc) return -ENODEV; - if (dev->header_ops == NULL || - skb_dst(skb) == NULL || - dst_get_neighbour(skb_dst(skb)) == NULL) + if (!dev->header_ops || !dst) return 0; - return __teql_resolve(skb, skb_res, dev); + + rcu_read_lock(); + mn = dst_get_neighbour(dst); + res = mn ? __teql_resolve(skb, skb_res, dev, txq, mn) : 0; + rcu_read_unlock(); + + return res; } static netdev_tx_t teql_master_xmit(struct sk_buff *skb, struct net_device *dev) @@ -307,7 +316,7 @@ restart: continue; } - switch (teql_resolve(skb, skb_res, slave)) { + switch (teql_resolve(skb, skb_res, slave, slave_txq)) { case 0: if (__netif_tx_trylock(slave_txq)) { unsigned int length = qdisc_pkt_len(skb); -- cgit v0.10.2 From 218fa90f072e4aeff9003d57e390857f4f35513e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 29 Nov 2011 20:05:55 +0000 Subject: ipv4: fix lockdep splat in rt_cache_seq_show After commit f2c31e32b378 (fix NULL dereferences in check_peer_redir()), dst_get_neighbour() should be guarded by rcu_read_lock() / rcu_read_unlock() section. Reported-by: Miles Lane Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 5c28472..57e01bc 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -417,9 +417,13 @@ static int rt_cache_seq_show(struct seq_file *seq, void *v) else { struct rtable *r = v; struct neighbour *n; - int len; + int len, HHUptod; + rcu_read_lock(); n = dst_get_neighbour(&r->dst); + HHUptod = (n && (n->nud_state & NUD_CONNECTED)) ? 1 : 0; + rcu_read_unlock(); + seq_printf(seq, "%s\t%08X\t%08X\t%8X\t%d\t%u\t%d\t" "%08X\t%d\t%u\t%u\t%02X\t%d\t%1d\t%08X%n", r->dst.dev ? r->dst.dev->name : "*", @@ -433,7 +437,7 @@ static int rt_cache_seq_show(struct seq_file *seq, void *v) dst_metric(&r->dst, RTAX_RTTVAR)), r->rt_key_tos, -1, - (n && (n->nud_state & NUD_CONNECTED)) ? 1 : 0, + HHUptod, r->rt_spec_dst, &len); seq_printf(seq, "%*s\n", 127 - len, ""); -- cgit v0.10.2 From 14383c295ab48178c449336f5d74e9e615e36723 Mon Sep 17 00:00:00 2001 From: "Jon Medhurst (Tixy)" Date: Tue, 29 Nov 2011 08:14:35 +0100 Subject: ARM: 7180/1: Change kprobes testcase with unpredictable STRD instruction There is a kprobes testcase for the instruction "strd r2, [r3], r4". This has unpredictable behaviour as it uses r3 for register writeback addressing and also stores it to memory. On a cortex A9, this testcase would fail because the instruction writes the updated value of r3 to memory, whereas the kprobes emulation code writes the original value. Fix this by changing testcase to used r5 instead of r3. Reported-by: Leif Lindholm Tested-by: Leif Lindholm Acked-by: Nicolas Pitre Signed-off-by: Jon Medhurst Signed-off-by: Russell King diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c index fc82de8..edf9ad8 100644 --- a/arch/arm/kernel/kprobes-test-arm.c +++ b/arch/arm/kernel/kprobes-test-arm.c @@ -550,7 +550,7 @@ void kprobe_arm_test_cases(void) TEST_RPR( "strccd r",8, VAL2,", [r",13,0, ", r",12,48,"]") TEST_RPR( "strd r",4, VAL1,", [r",2, 24,", r",3, 48,"]!") TEST_RPR( "strcsd r",12,VAL2,", [r",11,48,", -r",10,24,"]!") - TEST_RPR( "strd r",2, VAL1,", [r",3, 24,"], r",4,48,"") + TEST_RPR( "strd r",2, VAL1,", [r",5, 24,"], r",4,48,"") TEST_RPR( "strd r",10,VAL2,", [r",9, 48,"], -r",7,24,"") TEST_UNSUPPORTED(".word 0xe1afc0fa @ strd r12, [pc, r10]!") -- cgit v0.10.2 From b5bed7fe801d1460424b7aeb6b06464e23d2a1e6 Mon Sep 17 00:00:00 2001 From: "Jon Medhurst (Tixy)" Date: Tue, 29 Nov 2011 08:16:02 +0100 Subject: ARM: 7181/1: Restrict kprobes probing SWP instructions to ARMv5 and below The SWP instruction is deprecated on ARMv6 and with ARMv7 it will be UNDEFINED when CONFIG_SWP_EMULATE is selected. In this case, probing a SWP instruction will cause an oops when the kprobes emulation code executes an undefined instruction. As the SWP instruction should be rare or non-existent in kernels for ARMv6 and later, we can simply avoid these problems by not allowing probing of these. Reported-by: Leif Lindholm Tested-by: Leif Lindholm Acked-by: Nicolas Pitre Signed-off-by: Jon Medhurst Signed-off-by: Russell King diff --git a/arch/arm/kernel/kprobes-arm.c b/arch/arm/kernel/kprobes-arm.c index 9fe8910..8a30c89 100644 --- a/arch/arm/kernel/kprobes-arm.c +++ b/arch/arm/kernel/kprobes-arm.c @@ -519,10 +519,12 @@ static const union decode_item arm_cccc_0000_____1001_table[] = { static const union decode_item arm_cccc_0001_____1001_table[] = { /* Synchronization primitives */ +#if __LINUX_ARM_ARCH__ < 6 + /* Deprecated on ARMv6 and may be UNDEFINED on v7 */ /* SMP/SWPB cccc 0001 0x00 xxxx xxxx xxxx 1001 xxxx */ DECODE_EMULATEX (0x0fb000f0, 0x01000090, emulate_rd12rn16rm0_rwflags_nopc, REGS(NOPC, NOPC, 0, 0, NOPC)), - +#endif /* LDREX/STREX{,D,B,H} cccc 0001 1xxx xxxx xxxx xxxx 1001 xxxx */ /* And unallocated instructions... */ DECODE_END diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c index edf9ad8..ba32b39 100644 --- a/arch/arm/kernel/kprobes-test-arm.c +++ b/arch/arm/kernel/kprobes-test-arm.c @@ -427,18 +427,25 @@ void kprobe_arm_test_cases(void) TEST_GROUP("Synchronization primitives") - /* - * Use hard coded constants for SWP instructions to avoid warnings - * about deprecated instructions. - */ - TEST_RP( ".word 0xe108e097 @ swp lr, r",7,VAL2,", [r",8,0,"]") - TEST_R( ".word 0x610d0091 @ swpvs r0, r",1,VAL1,", [sp]") - TEST_RP( ".word 0xe10cd09e @ swp sp, r",14,VAL2,", [r",12,13*4,"]") +#if __LINUX_ARM_ARCH__ < 6 + TEST_RP("swp lr, r",7,VAL2,", [r",8,0,"]") + TEST_R( "swpvs r0, r",1,VAL1,", [sp]") + TEST_RP("swp sp, r",14,VAL2,", [r",12,13*4,"]") +#else + TEST_UNSUPPORTED(".word 0xe108e097 @ swp lr, r7, [r8]") + TEST_UNSUPPORTED(".word 0x610d0091 @ swpvs r0, r1, [sp]") + TEST_UNSUPPORTED(".word 0xe10cd09e @ swp sp, r14 [r12]") +#endif TEST_UNSUPPORTED(".word 0xe102f091 @ swp pc, r1, [r2]") TEST_UNSUPPORTED(".word 0xe102009f @ swp r0, pc, [r2]") TEST_UNSUPPORTED(".word 0xe10f0091 @ swp r0, r1, [pc]") - TEST_RP( ".word 0xe148e097 @ swpb lr, r",7,VAL2,", [r",8,0,"]") - TEST_R( ".word 0x614d0091 @ swpvsb r0, r",1,VAL1,", [sp]") +#if __LINUX_ARM_ARCH__ < 6 + TEST_RP("swpb lr, r",7,VAL2,", [r",8,0,"]") + TEST_R( "swpvsb r0, r",1,VAL1,", [sp]") +#else + TEST_UNSUPPORTED(".word 0xe148e097 @ swpb lr, r7, [r8]") + TEST_UNSUPPORTED(".word 0x614d0091 @ swpvsb r0, r1, [sp]") +#endif TEST_UNSUPPORTED(".word 0xe142f091 @ swpb pc, r1, [r2]") TEST_UNSUPPORTED(".word 0xe1100090") /* Unallocated space */ -- cgit v0.10.2 From 4cbd6b167f9ed756ced970e0a95538f60ae3b9ab Mon Sep 17 00:00:00 2001 From: Vincent Guittot Date: Tue, 29 Nov 2011 15:50:20 +0100 Subject: ARM: 7182/1: ARM cpu topology: fix warning kernel/sched.c:7354:2: warning: initialization from incompatible pointer type Align cpu_coregroup_mask prototype interface with sched_domain_mask_f typedef use int cpu instead of unsigned int cpu Cc: Signed-off-by: Vincent Guittot Signed-off-by: Russell King diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h index a7e457e..58b8b84 100644 --- a/arch/arm/include/asm/topology.h +++ b/arch/arm/include/asm/topology.h @@ -25,7 +25,7 @@ extern struct cputopo_arm cpu_topology[NR_CPUS]; void init_cpu_topology(void); void store_cpu_topology(unsigned int cpuid); -const struct cpumask *cpu_coregroup_mask(unsigned int cpu); +const struct cpumask *cpu_coregroup_mask(int cpu); #else diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index 1040c00..8200dea 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -43,7 +43,7 @@ struct cputopo_arm cpu_topology[NR_CPUS]; -const struct cpumask *cpu_coregroup_mask(unsigned int cpu) +const struct cpumask *cpu_coregroup_mask(int cpu) { return &cpu_topology[cpu].core_sibling; } -- cgit v0.10.2 From 917fbdb32f37e9a93b00bb12ee83532982982df3 Mon Sep 17 00:00:00 2001 From: Henrik Saavedra Persson Date: Wed, 23 Nov 2011 23:37:15 +0000 Subject: bonding: only use primary address for ARP Only use the primary address of the bond device for master_ip. This will prevent changing the ARP source address in Active-Backup mode whenever a secondry address is added to the bond device. Signed-off-by: Henrik Saavedra Persson Signed-off-by: Andy Gospodarek Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index b0c5772..7f87568 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2553,30 +2553,6 @@ re_arm: } } -static __be32 bond_glean_dev_ip(struct net_device *dev) -{ - struct in_device *idev; - struct in_ifaddr *ifa; - __be32 addr = 0; - - if (!dev) - return 0; - - rcu_read_lock(); - idev = __in_dev_get_rcu(dev); - if (!idev) - goto out; - - ifa = idev->ifa_list; - if (!ifa) - goto out; - - addr = ifa->ifa_local; -out: - rcu_read_unlock(); - return addr; -} - static int bond_has_this_ip(struct bonding *bond, __be32 ip) { struct vlan_entry *vlan; @@ -3322,6 +3298,10 @@ static int bond_inetaddr_event(struct notifier_block *this, unsigned long event, struct bonding *bond; struct vlan_entry *vlan; + /* we only care about primary address */ + if(ifa->ifa_flags & IFA_F_SECONDARY) + return NOTIFY_DONE; + list_for_each_entry(bond, &bn->dev_list, bond_list) { if (bond->dev == event_dev) { switch (event) { @@ -3329,7 +3309,7 @@ static int bond_inetaddr_event(struct notifier_block *this, unsigned long event, bond->master_ip = ifa->ifa_local; return NOTIFY_OK; case NETDEV_DOWN: - bond->master_ip = bond_glean_dev_ip(bond->dev); + bond->master_ip = 0; return NOTIFY_OK; default: return NOTIFY_DONE; @@ -3345,8 +3325,7 @@ static int bond_inetaddr_event(struct notifier_block *this, unsigned long event, vlan->vlan_ip = ifa->ifa_local; return NOTIFY_OK; case NETDEV_DOWN: - vlan->vlan_ip = - bond_glean_dev_ip(vlan_dev); + vlan->vlan_ip = 0; return NOTIFY_OK; default: return NOTIFY_DONE; -- cgit v0.10.2 From ea6a5d3b97b768561db6358f15e4c84ced0f4f7e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 30 Nov 2011 12:10:53 +0000 Subject: sch_red: fix red_calc_qavg_from_idle_time Since commit a4a710c4a7490587 (pkt_sched: Change PSCHED_SHIFT from 10 to 6) it seems RED/GRED are broken. red_calc_qavg_from_idle_time() computes a delay in us units, but this delay is now 16 times bigger than real delay, so the final qavg result smaller than expected. Use standard kernel time services since there is no need to obfuscate them. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/include/net/red.h b/include/net/red.h index 3319f16..b72a3b8 100644 --- a/include/net/red.h +++ b/include/net/red.h @@ -116,7 +116,7 @@ struct red_parms { u32 qR; /* Cached random number */ unsigned long qavg; /* Average queue length: A scaled */ - psched_time_t qidlestart; /* Start of current idle period */ + ktime_t qidlestart; /* Start of current idle period */ }; static inline u32 red_rmask(u8 Plog) @@ -148,17 +148,17 @@ static inline void red_set_parms(struct red_parms *p, static inline int red_is_idling(struct red_parms *p) { - return p->qidlestart != PSCHED_PASTPERFECT; + return p->qidlestart.tv64 != 0; } static inline void red_start_of_idle_period(struct red_parms *p) { - p->qidlestart = psched_get_time(); + p->qidlestart = ktime_get(); } static inline void red_end_of_idle_period(struct red_parms *p) { - p->qidlestart = PSCHED_PASTPERFECT; + p->qidlestart.tv64 = 0; } static inline void red_restart(struct red_parms *p) @@ -170,13 +170,10 @@ static inline void red_restart(struct red_parms *p) static inline unsigned long red_calc_qavg_from_idle_time(struct red_parms *p) { - psched_time_t now; - long us_idle; + s64 delta = ktime_us_delta(ktime_get(), p->qidlestart); + long us_idle = min_t(s64, delta, p->Scell_max); int shift; - now = psched_get_time(); - us_idle = psched_tdiff_bounded(now, p->qidlestart, p->Scell_max); - /* * The problem: ideally, average length queue recalcultion should * be done over constant clock intervals. This is too expensive, so -- cgit v0.10.2 From 8f891489866ec62a87494eff3ed17c88152c32d4 Mon Sep 17 00:00:00 2001 From: "RongQing.Li" Date: Wed, 30 Nov 2011 23:43:07 -0500 Subject: net/core: fix rollback handler in register_netdevice_notifier Within nested statements, the break statement terminates only the do, for, switch, or while statement that immediately encloses it, So replace the break with goto. Signed-off-by: RongQing.Li Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index 1482eea..5a13edf 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1396,7 +1396,7 @@ rollback: for_each_net(net) { for_each_netdev(net, dev) { if (dev == last) - break; + goto outroll; if (dev->flags & IFF_UP) { nb->notifier_call(nb, NETDEV_GOING_DOWN, dev); @@ -1407,6 +1407,7 @@ rollback: } } +outroll: raw_notifier_chain_unregister(&netdev_chain, nb); goto unlock; } -- cgit v0.10.2 From f4a8e6563ea5366f563cb741a27fe90c5fa7f0fc Mon Sep 17 00:00:00 2001 From: Jan Schmidt Date: Thu, 1 Dec 2011 09:30:36 -0500 Subject: Btrfs: fix meta data raid-repair merge problem Commit 4a54c8c16 introduced raid-repair, killing the individual readpage_io_failed_hook entries from inode.c and disk-io.c. Commit 4bb31e92 introduced new readahead code, adding a readpage_io_failed_hook to disk-io.c. The raid-repair commit had logic to disable raid-repair, if readpage_io_failed_hook is set. Thus, the readahead commit effectively disabled raid-repair for meta data. This commit changes the logic to always attempt raid-repair when needed and call the readpage_io_failed_hook in case raid-repair fails. This is much more straight forward and should have been like that from the beginning. Signed-off-by: Jan Schmidt Reported-by: Stefan Behrens Signed-off-by: Chris Mason diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 9472d3d..be1bf62 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -2287,14 +2287,20 @@ static void end_bio_extent_readpage(struct bio *bio, int err) if (!uptodate) { int failed_mirror; failed_mirror = (int)(unsigned long)bio->bi_bdev; - if (tree->ops && tree->ops->readpage_io_failed_hook) - ret = tree->ops->readpage_io_failed_hook( - bio, page, start, end, - failed_mirror, state); - else - ret = bio_readpage_error(bio, page, start, end, - failed_mirror, NULL); + /* + * The generic bio_readpage_error handles errors the + * following way: If possible, new read requests are + * created and submitted and will end up in + * end_bio_extent_readpage as well (if we're lucky, not + * in the !uptodate case). In that case it returns 0 and + * we just go on with the next page in our bio. If it + * can't handle the error it will return -EIO and we + * remain responsible for that page. + */ + ret = bio_readpage_error(bio, page, start, end, + failed_mirror, NULL); if (ret == 0) { +error_handled: uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags); if (err) @@ -2302,6 +2308,13 @@ static void end_bio_extent_readpage(struct bio *bio, int err) uncache_state(&cached); continue; } + if (tree->ops && tree->ops->readpage_io_failed_hook) { + ret = tree->ops->readpage_io_failed_hook( + bio, page, start, end, + failed_mirror, state); + if (ret == 0) + goto error_handled; + } } if (uptodate) { -- cgit v0.10.2 From efbc368dcc6426d5430b9b8eeda944cf2cb74b8c Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 1 Dec 2011 13:38:59 -0500 Subject: ipv4: Perform peer validation on cached route lookup. Otherwise we won't notice the peer GENID change. Reported-by: Steffen Klassert Signed-off-by: David S. Miller diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 57e01bc..ca5e237 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1693,12 +1693,8 @@ static void ip_rt_update_pmtu(struct dst_entry *dst, u32 mtu) } -static struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie) +static struct rtable *ipv4_validate_peer(struct rtable *rt) { - struct rtable *rt = (struct rtable *) dst; - - if (rt_is_expired(rt)) - return NULL; if (rt->rt_peer_genid != rt_peer_genid()) { struct inet_peer *peer; @@ -1707,19 +1703,29 @@ static struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie) peer = rt->peer; if (peer) { - check_peer_pmtu(dst, peer); + check_peer_pmtu(&rt->dst, peer); if (peer->redirect_genid != redirect_genid) peer->redirect_learned.a4 = 0; if (peer->redirect_learned.a4 && peer->redirect_learned.a4 != rt->rt_gateway) { - if (check_peer_redir(dst, peer)) + if (check_peer_redir(&rt->dst, peer)) return NULL; } } rt->rt_peer_genid = rt_peer_genid(); } + return rt; +} + +static struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie) +{ + struct rtable *rt = (struct rtable *) dst; + + if (rt_is_expired(rt)) + return NULL; + dst = (struct dst_entry *) ipv4_validate_peer(rt); return dst; } @@ -2374,6 +2380,9 @@ int ip_route_input_common(struct sk_buff *skb, __be32 daddr, __be32 saddr, rth->rt_mark == skb->mark && net_eq(dev_net(rth->dst.dev), net) && !rt_is_expired(rth)) { + rth = ipv4_validate_peer(rth); + if (!rth) + continue; if (noref) { dst_use_noref(&rth->dst, jiffies); skb_dst_set_noref(skb, &rth->dst); @@ -2749,6 +2758,9 @@ struct rtable *__ip_route_output_key(struct net *net, struct flowi4 *flp4) (IPTOS_RT_MASK | RTO_ONLINK)) && net_eq(dev_net(rth->dst.dev), net) && !rt_is_expired(rth)) { + rth = ipv4_validate_peer(rth); + if (!rth) + continue; dst_use(&rth->dst, jiffies); RT_CACHE_STAT_INC(out_hit); rcu_read_unlock_bh(); -- cgit v0.10.2 From b03b6dd58cef7d15b7c46a6729b83dd535ef08ab Mon Sep 17 00:00:00 2001 From: Vitalii Demianets Date: Fri, 25 Nov 2011 00:16:37 +0000 Subject: bridge: master device stuck in no-carrier state forever when in user-stp mode When in user-stp mode, bridge master do not follow state of its slaves, so after the following sequence of events it can stuck forever in no-carrier state: 1) turn stp off 2) put all slaves down - master device will follow their state and also go in no-carrier state 3) turn stp on with bridge-stp script returning 0 (go to the user-stp mode) Now bridge master won't follow slaves' state and will never reach running state. This patch solves the problem by making user-stp and kernel-stp behavior similar regarding master following slaves' states. Signed-off-by: Vitalii Demianets Acked-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c index e5f9ece3..a1daf82 100644 --- a/net/bridge/br_netlink.c +++ b/net/bridge/br_netlink.c @@ -18,6 +18,7 @@ #include #include "br_private.h" +#include "br_private_stp.h" static inline size_t br_nlmsg_size(void) { @@ -188,6 +189,11 @@ static int br_rtm_setlink(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg) p->state = new_state; br_log_state(p); + + spin_lock_bh(&p->br->lock); + br_port_state_selection(p->br); + spin_unlock_bh(&p->br->lock); + br_ifinfo_notify(RTM_NEWLINK, p); return 0; diff --git a/net/bridge/br_stp.c b/net/bridge/br_stp.c index ad0a3f7..dd147d7 100644 --- a/net/bridge/br_stp.c +++ b/net/bridge/br_stp.c @@ -399,25 +399,24 @@ void br_port_state_selection(struct net_bridge *br) struct net_bridge_port *p; unsigned int liveports = 0; - /* Don't change port states if userspace is handling STP */ - if (br->stp_enabled == BR_USER_STP) - return; - list_for_each_entry(p, &br->port_list, list) { if (p->state == BR_STATE_DISABLED) continue; - if (p->port_no == br->root_port) { - p->config_pending = 0; - p->topology_change_ack = 0; - br_make_forwarding(p); - } else if (br_is_designated_port(p)) { - del_timer(&p->message_age_timer); - br_make_forwarding(p); - } else { - p->config_pending = 0; - p->topology_change_ack = 0; - br_make_blocking(p); + /* Don't change port states if userspace is handling STP */ + if (br->stp_enabled != BR_USER_STP) { + if (p->port_no == br->root_port) { + p->config_pending = 0; + p->topology_change_ack = 0; + br_make_forwarding(p); + } else if (br_is_designated_port(p)) { + del_timer(&p->message_age_timer); + br_make_forwarding(p); + } else { + p->config_pending = 0; + p->topology_change_ack = 0; + br_make_blocking(p); + } } if (p->state == BR_STATE_FORWARDING) -- cgit v0.10.2 From 59c2cdae2791c0b2ee13d148edc6b771e7e7953f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 1 Dec 2011 14:12:55 -0500 Subject: Revert "udp: remove redundant variable" This reverts commit 81d54ec8479a2c695760da81f05b5a9fb2dbe40a. If we take the "try_again" goto, due to a checksum error, the 'len' has already been truncated. So we won't compute the same values as the original code did. Reported-by: paul bilke Signed-off-by: David S. Miller diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index ab0966d..5a65eea 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1164,7 +1164,7 @@ int udp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, struct inet_sock *inet = inet_sk(sk); struct sockaddr_in *sin = (struct sockaddr_in *)msg->msg_name; struct sk_buff *skb; - unsigned int ulen; + unsigned int ulen, copied; int peeked; int err; int is_udplite = IS_UDPLITE(sk); @@ -1186,9 +1186,10 @@ try_again: goto out; ulen = skb->len - sizeof(struct udphdr); - if (len > ulen) - len = ulen; - else if (len < ulen) + copied = len; + if (copied > ulen) + copied = ulen; + else if (copied < ulen) msg->msg_flags |= MSG_TRUNC; /* @@ -1197,14 +1198,14 @@ try_again: * coverage checksum (UDP-Lite), do it before the copy. */ - if (len < ulen || UDP_SKB_CB(skb)->partial_cov) { + if (copied < ulen || UDP_SKB_CB(skb)->partial_cov) { if (udp_lib_checksum_complete(skb)) goto csum_copy_err; } if (skb_csum_unnecessary(skb)) err = skb_copy_datagram_iovec(skb, sizeof(struct udphdr), - msg->msg_iov, len); + msg->msg_iov, copied); else { err = skb_copy_and_csum_datagram_iovec(skb, sizeof(struct udphdr), @@ -1233,7 +1234,7 @@ try_again: if (inet->cmsg_flags) ip_cmsg_recv(msg, skb); - err = len; + err = copied; if (flags & MSG_TRUNC) err = ulen; diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 846f4757..8c25419 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -340,7 +340,7 @@ int udpv6_recvmsg(struct kiocb *iocb, struct sock *sk, struct ipv6_pinfo *np = inet6_sk(sk); struct inet_sock *inet = inet_sk(sk); struct sk_buff *skb; - unsigned int ulen; + unsigned int ulen, copied; int peeked; int err; int is_udplite = IS_UDPLITE(sk); @@ -363,9 +363,10 @@ try_again: goto out; ulen = skb->len - sizeof(struct udphdr); - if (len > ulen) - len = ulen; - else if (len < ulen) + copied = len; + if (copied > ulen) + copied = ulen; + else if (copied < ulen) msg->msg_flags |= MSG_TRUNC; is_udp4 = (skb->protocol == htons(ETH_P_IP)); @@ -376,14 +377,14 @@ try_again: * coverage checksum (UDP-Lite), do it before the copy. */ - if (len < ulen || UDP_SKB_CB(skb)->partial_cov) { + if (copied < ulen || UDP_SKB_CB(skb)->partial_cov) { if (udp_lib_checksum_complete(skb)) goto csum_copy_err; } if (skb_csum_unnecessary(skb)) err = skb_copy_datagram_iovec(skb, sizeof(struct udphdr), - msg->msg_iov,len); + msg->msg_iov, copied ); else { err = skb_copy_and_csum_datagram_iovec(skb, sizeof(struct udphdr), msg->msg_iov); if (err == -EINVAL) @@ -432,7 +433,7 @@ try_again: datagram_recv_ctl(sk, msg, skb); } - err = len; + err = copied; if (flags & MSG_TRUNC) err = ulen; -- cgit v0.10.2 From 939255798a468e1a92f03546de6e87be7b491e57 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Tue, 15 Nov 2011 14:56:34 -0800 Subject: ocfs2: avoid unaligned access to dqc_bitmap The dqc_bitmap field of struct ocfs2_local_disk_chunk is 32-bit aligned, but not 64-bit aligned. The dqc_bitmap is accessed by ocfs2_set_bit(), ocfs2_clear_bit(), ocfs2_test_bit(), or ocfs2_find_next_zero_bit(). These are wrapper macros for ext2_*_bit() which need to take an unsigned long aligned address (though some architectures are able to handle unaligned address correctly) So some 64bit architectures may not be able to access the dqc_bitmap correctly. This avoids such unaligned access by using another wrapper functions for ext2_*_bit(). The code is taken from fs/ext4/mballoc.c which also need to handle unaligned bitmap access. Signed-off-by: Akinobu Mita Acked-by: Joel Becker Cc: Mark Fasheh Signed-off-by: Andrew Morton Signed-off-by: Joel Becker diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h index bcde467..d355e6e 100644 --- a/fs/ocfs2/ocfs2.h +++ b/fs/ocfs2/ocfs2.h @@ -849,5 +849,52 @@ static inline void _ocfs2_clear_bit(unsigned int bit, unsigned long *bitmap) #define ocfs2_test_bit test_bit_le #define ocfs2_find_next_zero_bit find_next_zero_bit_le #define ocfs2_find_next_bit find_next_bit_le + +static inline void *correct_addr_and_bit_unaligned(int *bit, void *addr) +{ +#if BITS_PER_LONG == 64 + *bit += ((unsigned long) addr & 7UL) << 3; + addr = (void *) ((unsigned long) addr & ~7UL); +#elif BITS_PER_LONG == 32 + *bit += ((unsigned long) addr & 3UL) << 3; + addr = (void *) ((unsigned long) addr & ~3UL); +#else +#error "how many bits you are?!" +#endif + return addr; +} + +static inline void ocfs2_set_bit_unaligned(int bit, void *bitmap) +{ + bitmap = correct_addr_and_bit_unaligned(&bit, bitmap); + ocfs2_set_bit(bit, bitmap); +} + +static inline void ocfs2_clear_bit_unaligned(int bit, void *bitmap) +{ + bitmap = correct_addr_and_bit_unaligned(&bit, bitmap); + ocfs2_clear_bit(bit, bitmap); +} + +static inline int ocfs2_test_bit_unaligned(int bit, void *bitmap) +{ + bitmap = correct_addr_and_bit_unaligned(&bit, bitmap); + return ocfs2_test_bit(bit, bitmap); +} + +static inline int ocfs2_find_next_zero_bit_unaligned(void *bitmap, int max, + int start) +{ + int fix = 0, ret, tmpmax; + bitmap = correct_addr_and_bit_unaligned(&fix, bitmap); + tmpmax = max + fix; + start += fix; + + ret = ocfs2_find_next_zero_bit(bitmap, tmpmax, start) - fix; + if (ret > max) + return max; + return ret; +} + #endif /* OCFS2_H */ diff --git a/fs/ocfs2/quota_local.c b/fs/ocfs2/quota_local.c index 942fd65..f100bf7 100644 --- a/fs/ocfs2/quota_local.c +++ b/fs/ocfs2/quota_local.c @@ -551,8 +551,8 @@ static int ocfs2_recover_local_quota_file(struct inode *lqinode, goto out_commit; } lock_buffer(qbh); - WARN_ON(!ocfs2_test_bit(bit, dchunk->dqc_bitmap)); - ocfs2_clear_bit(bit, dchunk->dqc_bitmap); + WARN_ON(!ocfs2_test_bit_unaligned(bit, dchunk->dqc_bitmap)); + ocfs2_clear_bit_unaligned(bit, dchunk->dqc_bitmap); le32_add_cpu(&dchunk->dqc_free, 1); unlock_buffer(qbh); ocfs2_journal_dirty(handle, qbh); @@ -949,7 +949,7 @@ static struct ocfs2_quota_chunk *ocfs2_find_free_entry(struct super_block *sb, * ol_quota_entries_per_block(sb); } - found = ocfs2_find_next_zero_bit(dchunk->dqc_bitmap, len, 0); + found = ocfs2_find_next_zero_bit_unaligned(dchunk->dqc_bitmap, len, 0); /* We failed? */ if (found == len) { mlog(ML_ERROR, "Did not find empty entry in chunk %d with %u" @@ -1213,7 +1213,7 @@ static void olq_alloc_dquot(struct buffer_head *bh, void *private) struct ocfs2_local_disk_chunk *dchunk; dchunk = (struct ocfs2_local_disk_chunk *)bh->b_data; - ocfs2_set_bit(*offset, dchunk->dqc_bitmap); + ocfs2_set_bit_unaligned(*offset, dchunk->dqc_bitmap); le32_add_cpu(&dchunk->dqc_free, -1); } @@ -1294,7 +1294,7 @@ int ocfs2_local_release_dquot(handle_t *handle, struct dquot *dquot) (od->dq_chunk->qc_headerbh->b_data); /* Mark structure as freed */ lock_buffer(od->dq_chunk->qc_headerbh); - ocfs2_clear_bit(offset, dchunk->dqc_bitmap); + ocfs2_clear_bit_unaligned(offset, dchunk->dqc_bitmap); le32_add_cpu(&dchunk->dqc_free, 1); unlock_buffer(od->dq_chunk->qc_headerbh); ocfs2_journal_dirty(handle, od->dq_chunk->qc_headerbh); -- cgit v0.10.2 From 5611cc4572e889b62a7b4c72a413536bf6a9c416 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 1 Dec 2011 14:56:01 -0800 Subject: Linux 3.2-rc4 diff --git a/Makefile b/Makefile index 3a8f064..12aafc2 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 2 SUBLEVEL = 0 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Saber-toothed Squirrel # *DOCUMENTATION* -- cgit v0.10.2 From 1ee5fa1e9970a16036e37c7b9d5ce81c778252fc Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 1 Dec 2011 11:06:34 +0000 Subject: sch_red: fix red_change MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Le mercredi 30 novembre 2011 à 14:36 -0800, Stephen Hemminger a écrit : > (Almost) nobody uses RED because they can't figure it out. > According to Wikipedia, VJ says that: > "there are not one, but two bugs in classic RED." RED is useful for high throughput routers, I doubt many linux machines act as such devices. I was considering adding Adaptative RED (Sally Floyd, Ramakrishna Gummadi, Scott Shender), August 2001 In this version, maxp is dynamic (from 1% to 50%), and user only have to setup min_th (target average queue size) (max_th and wq (burst in linux RED) are automatically setup) By the way it seems we have a small bug in red_change() if (skb_queue_empty(&sch->q)) red_end_of_idle_period(&q->parms); First, if queue is empty, we should call red_start_of_idle_period(&q->parms); Second, since we dont use anymore sch->q, but q->qdisc, the test is meaningless. Oh well... [PATCH] sch_red: fix red_change() Now RED is classful, we must check q->qdisc->q.qlen, and if queue is empty, we start an idle period, not end it. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/sched/sch_red.c b/net/sched/sch_red.c index 6649463..d617161 100644 --- a/net/sched/sch_red.c +++ b/net/sched/sch_red.c @@ -209,8 +209,8 @@ static int red_change(struct Qdisc *sch, struct nlattr *opt) ctl->Plog, ctl->Scell_log, nla_data(tb[TCA_RED_STAB])); - if (skb_queue_empty(&sch->q)) - red_end_of_idle_period(&q->parms); + if (!q->qdisc->q.qlen) + red_start_of_idle_period(&q->parms); sch_tree_unlock(sch); return 0; -- cgit v0.10.2 From d01ff0a049f749e0bf10a35bb23edd012718c8c2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Peter=20Pan=28=E6=BD=98=E5=8D=AB=E5=B9=B3=29?= Date: Thu, 1 Dec 2011 15:47:06 +0000 Subject: ipv4: flush route cache after change accept_local After reset ipv4_devconf->data[IPV4_DEVCONF_ACCEPT_LOCAL] to 0, we should flush route cache, or it will continue receive packets with local source address, which should be dropped. Signed-off-by: Weiping Pan Signed-off-by: David S. Miller diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index c6b5092..65f01dc 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -1490,7 +1490,9 @@ static int devinet_conf_proc(ctl_table *ctl, int write, void __user *buffer, size_t *lenp, loff_t *ppos) { + int old_value = *(int *)ctl->data; int ret = proc_dointvec(ctl, write, buffer, lenp, ppos); + int new_value = *(int *)ctl->data; if (write) { struct ipv4_devconf *cnf = ctl->extra1; @@ -1501,6 +1503,9 @@ static int devinet_conf_proc(ctl_table *ctl, int write, if (cnf == net->ipv4.devconf_dflt) devinet_copy_dflt_conf(net, i); + if (i == IPV4_DEVCONF_ACCEPT_LOCAL - 1) + if ((new_value == 0) && (old_value != 0)) + rt_cache_flush(net, 0); } return ret; -- cgit v0.10.2 From 3ced1be5490f5c415d51a1e5918beeb9239d546b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 1 Dec 2011 22:19:01 -0500 Subject: netfilter: Remove ADVANCED dependency from NF_CONNTRACK_NETBIOS_NS firewalld in Fedora 16 needs this. Signed-off-by: David S. Miller diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig index e8f3796..d5597b7 100644 --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig @@ -201,7 +201,6 @@ config NF_CONNTRACK_BROADCAST config NF_CONNTRACK_NETBIOS_NS tristate "NetBIOS name service protocol support" - depends on NETFILTER_ADVANCED select NF_CONNTRACK_BROADCAST help NetBIOS name service requests are sent as broadcast messages from an -- cgit v0.10.2