From 005625fc5d62220242ec488d112e0a97e7fcd7bc Mon Sep 17 00:00:00 2001
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Wed, 15 May 2013 15:36:54 +0200
Subject: pci: mvebu: enable driver usage on Kirkwood

We allow the pci-mvebu driver to be compiled on the Kirkwood platform,
and add the 'marvell,kirkwood-pcie' as a compatible string supported
by the driver.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
index eb69d92..f8d4058 100644
--- a/Documentation/devicetree/bindings/pci/mvebu-pci.txt
+++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
@@ -4,6 +4,7 @@ Mandatory properties:
 - compatible: one of the following values:
     marvell,armada-370-pcie
     marvell,armada-xp-pcie
+    marvell,kirkwood-pcie
 - #address-cells, set to <3>
 - #size-cells, set to <2>
 - #interrupt-cells, set to <1>
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index 6918fbc..1f1d67f 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -3,6 +3,6 @@ menu "PCI host controller drivers"
 
 config PCI_MVEBU
 	bool "Marvell EBU PCIe controller"
-	depends on ARCH_MVEBU
+	depends on ARCH_MVEBU || ARCH_KIRKWOOD
 
 endmenu
diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
index 9236ac0..c8397c4 100644
--- a/drivers/pci/host/pci-mvebu.c
+++ b/drivers/pci/host/pci-mvebu.c
@@ -854,6 +854,7 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev)
 static const struct of_device_id mvebu_pcie_of_match_table[] = {
 	{ .compatible = "marvell,armada-xp-pcie", },
 	{ .compatible = "marvell,armada-370-pcie", },
+	{ .compatible = "marvell,kirkwood-pcie", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, mvebu_pcie_of_match_table);
-- 
cgit v0.10.2


From 5afb9fe3678e2f54ba455a4c8b0c640037ca4775 Mon Sep 17 00:00:00 2001
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Wed, 15 May 2013 15:36:55 +0200
Subject: arm: kirkwood: move PCIe window init to legacy driver

Since we are going to enable the usage of the mvebu PCIe driver on
Kirkwood, we don't want the PCIe windows to be unconditionally created
by kirkwood_setup_wins(). Therefore, we move the PCIe window
initialization into the legacy PCIe driver
(arch/arm/mach-kirkwood/pcie.c).

The platforms using the legacy driver will see their windows
statically allocated by
arch/arm/mach-kirkwood/pcie.c:kirkwood_pcie_init(). The platforms
using the new driver in drivers/pci/ will see their windows
dynamically allocated directly by the driver.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index c2cae69..9b0b901 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -654,30 +654,6 @@ char * __init kirkwood_id(void)
 
 void __init kirkwood_setup_wins(void)
 {
-	/*
-	 * The PCIe windows will no longer be statically allocated
-	 * here once Kirkwood is migrated to the pci-mvebu driver.
-	 */
-	mvebu_mbus_add_window_remap_flags("pcie0.0",
-					  KIRKWOOD_PCIE_IO_PHYS_BASE,
-					  KIRKWOOD_PCIE_IO_SIZE,
-					  KIRKWOOD_PCIE_IO_BUS_BASE,
-					  MVEBU_MBUS_PCI_IO);
-	mvebu_mbus_add_window_remap_flags("pcie0.0",
-					  KIRKWOOD_PCIE_MEM_PHYS_BASE,
-					  KIRKWOOD_PCIE_MEM_SIZE,
-					  MVEBU_MBUS_NO_REMAP,
-					  MVEBU_MBUS_PCI_MEM);
-	mvebu_mbus_add_window_remap_flags("pcie1.0",
-					  KIRKWOOD_PCIE1_IO_PHYS_BASE,
-					  KIRKWOOD_PCIE1_IO_SIZE,
-					  KIRKWOOD_PCIE1_IO_BUS_BASE,
-					  MVEBU_MBUS_PCI_IO);
-	mvebu_mbus_add_window_remap_flags("pcie1.0",
-					  KIRKWOOD_PCIE1_MEM_PHYS_BASE,
-					  KIRKWOOD_PCIE1_MEM_SIZE,
-					  MVEBU_MBUS_NO_REMAP,
-					  MVEBU_MBUS_PCI_MEM);
 	mvebu_mbus_add_window("nand", KIRKWOOD_NAND_MEM_PHYS_BASE,
 			      KIRKWOOD_NAND_MEM_SIZE);
 	mvebu_mbus_add_window("sram", KIRKWOOD_SRAM_PHYS_BASE,
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index 7f43e6c..ddcb09f 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -12,6 +12,7 @@
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/clk.h>
+#include <linux/mbus.h>
 #include <video/vga.h>
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
@@ -253,6 +254,27 @@ static void __init add_pcie_port(int index, void __iomem *base)
 
 void __init kirkwood_pcie_init(unsigned int portmask)
 {
+	mvebu_mbus_add_window_remap_flags("pcie0.0",
+					  KIRKWOOD_PCIE_IO_PHYS_BASE,
+					  KIRKWOOD_PCIE_IO_SIZE,
+					  KIRKWOOD_PCIE_IO_BUS_BASE,
+					  MVEBU_MBUS_PCI_IO);
+	mvebu_mbus_add_window_remap_flags("pcie0.0",
+					  KIRKWOOD_PCIE_MEM_PHYS_BASE,
+					  KIRKWOOD_PCIE_MEM_SIZE,
+					  MVEBU_MBUS_NO_REMAP,
+					  MVEBU_MBUS_PCI_MEM);
+	mvebu_mbus_add_window_remap_flags("pcie1.0",
+					  KIRKWOOD_PCIE1_IO_PHYS_BASE,
+					  KIRKWOOD_PCIE1_IO_SIZE,
+					  KIRKWOOD_PCIE1_IO_BUS_BASE,
+					  MVEBU_MBUS_PCI_IO);
+	mvebu_mbus_add_window_remap_flags("pcie1.0",
+					  KIRKWOOD_PCIE1_MEM_PHYS_BASE,
+					  KIRKWOOD_PCIE1_MEM_SIZE,
+					  MVEBU_MBUS_NO_REMAP,
+					  MVEBU_MBUS_PCI_MEM);
+
 	vga_base = KIRKWOOD_PCIE_MEM_PHYS_BASE;
 
 	if (portmask & KW_PCIE0)
-- 
cgit v0.10.2


From 670ee03ccc29b3a14c6cbe04241c903342442c23 Mon Sep 17 00:00:00 2001
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Wed, 15 May 2013 15:36:56 +0200
Subject: arm: kirkwood: add SoC-level Device Tree data for PCIe interfaces

This commit adds Device Tree details to enable the PCIe interfaces on
Kirkwood. The 6281 has one PCIe interface, the 6282 has two PCIe
interfaces.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi
index d6c9d65..5137668 100644
--- a/arch/arm/boot/dts/kirkwood-6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6281.dtsi
@@ -40,5 +40,36 @@
 				marvell,function = "sdio";
 			};
 		};
+
+		pcie-controller {
+			compatible = "marvell,kirkwood-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges = <0x82000000 0 0x00040000 0x00040000 0 0x00002000   /* Port 0.0 registers */
+				  0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
+			          0x81000000 0 0          0xe8000000 0 0x00100000>; /* downstream I/O */
+
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 9>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
index 23991e4..66a751a 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -65,5 +65,53 @@
 			clocks = <&gate_clk 7>;
 			status = "disabled";
 		};
+
+		pcie-controller {
+			compatible = "marvell,kirkwood-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges = <0x82000000 0 0x00040000 0x00040000 0 0x00002000   /* Port 0.0 registers */
+			          0x82000000 0 0x00044000 0x00044000 0 0x00002000   /* Port 1.0 registers */
+				  0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
+			          0x81000000 0 0          0xe8000000 0 0x00100000>; /* downstream I/O */
+
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 9>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+			};
+
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 10>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 18>;
+				status = "disabled";
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index fada7e6..7eef88f 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -19,6 +19,7 @@
 	ocp@f1000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0xf1000000 0x4000000
+		          0xe0000000 0xe0000000 0x8100000 /* PCIE */
 		          0xf5000000 0xf5000000 0x0000400>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-- 
cgit v0.10.2


From 36e5722089ad757e9d15cd3b394389042cb28003 Mon Sep 17 00:00:00 2001
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Wed, 15 May 2013 15:36:57 +0200
Subject: arm: kirkwood: convert Iomega Iconnect to use DT for the PCIe
 interface

Now that the PCIe mvebu driver is usable on Kirkwood, use it instead
of the legacy PCIe code, since it allows to describe the PCIe
interfaces in the Device Tree.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index 12ccf74..e591d5d 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -109,6 +109,14 @@
 				reg = <0x980000 0x1f400000>;
 			};
 		};
+
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
 	};
 
 	gpio-leds {
diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c
index c8ebde4..98b5ad1 100644
--- a/arch/arm/mach-kirkwood/board-iconnect.c
+++ b/arch/arm/mach-kirkwood/board-iconnect.c
@@ -22,11 +22,3 @@ void __init iconnect_init(void)
 {
 	kirkwood_ge00_init(&iconnect_ge00_data);
 }
-
-static int __init iconnect_pci_init(void)
-{
-	if (of_machine_is_compatible("iom,iconnect"))
-		kirkwood_pcie_init(KW_PCIE0);
-	return 0;
-}
-subsys_initcall(iconnect_pci_init);
-- 
cgit v0.10.2


From 9470fbfb8d15350ac54770ccf921cbcffcdbc24f Mon Sep 17 00:00:00 2001
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Wed, 15 May 2013 15:36:58 +0200
Subject: arm: kirkwood: convert MPL CEC4 to use DT for the PCIe interface

Now that the PCIe mvebu driver is usable on Kirkwood, use it instead
of the legacy PCIe code, since it allows to describe the PCIe
interfaces in the Device Tree.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts
index 7588241..90501cf 100644
--- a/arch/arm/boot/dts/kirkwood-mplcec4.dts
+++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts
@@ -139,6 +139,14 @@
 			cd-gpios = <&gpio1 15 0>;
 			/* No WP GPIO */
 		};
+
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
 	};
 
 	gpio-leds {
diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c
index 7d6dc66..938712e 100644
--- a/arch/arm/mach-kirkwood/board-mplcec4.c
+++ b/arch/arm/mach-kirkwood/board-mplcec4.c
@@ -29,7 +29,6 @@ void __init mplcec4_init(void)
 	 */
 	kirkwood_ge00_init(&mplcec4_ge00_data);
 	kirkwood_ge01_init(&mplcec4_ge01_data);
-	kirkwood_pcie_init(KW_PCIE0);
 }
 
 
-- 
cgit v0.10.2


From 40fa8e5da25b35fea0bcea113c61d72ae31f20fd Mon Sep 17 00:00:00 2001
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Wed, 15 May 2013 15:36:59 +0200
Subject: arm: kirkwood: convert ZyXEL NSA310 to use DT for the PCIe interface

Now that the PCIe mvebu driver is usable on Kirkwood, use it instead
of the legacy PCIe code, since it allows to describe the PCIe
interfaces in the Device Tree.

Since it was the only device left that prevented this platform to use
the Device Tree only, we remove the board-nsa310.c file and the
related Kconfig/Makefile bits.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts
index a7412b9..9ddf218 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa310.dts
@@ -176,6 +176,14 @@
 				reg = <0x5040000 0x2fc0000>;
 			};
 		};
+
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
 	};
 
 	gpio_keys {
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 7509a89..267ca95 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -272,14 +272,6 @@ config MACH_NETSPACE_V2_DT
 	  Say 'Y' here if you want your kernel to support the LaCie
 	  Network Space v2 NAS, using Flattened Device Tree.
 
-config MACH_NSA310_DT
-	bool "ZyXEL NSA-310 (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	select ARM_ATAG_DTB_COMPAT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  ZyXEL NSA-310 board (Flattened Device Tree).
-
 config MACH_OPENBLOCKS_A6_DT
 	bool "Plat'Home OpenBlocks A6 (Flattened Device Tree)"
 	select ARCH_KIRKWOOD_DT
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index e1f3735..794366e 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -37,7 +37,6 @@ obj-$(CONFIG_MACH_NETSPACE_LITE_V2_DT)	+= board-ns2.o
 obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT)	+= board-ns2.o
 obj-$(CONFIG_MACH_NETSPACE_MINI_V2_DT)	+= board-ns2.o
 obj-$(CONFIG_MACH_NETSPACE_V2_DT)	+= board-ns2.o
-obj-$(CONFIG_MACH_NSA310_DT)		+= board-nsa310.o
 obj-$(CONFIG_MACH_OPENBLOCKS_A6_DT)	+= board-openblocks_a6.o
 obj-$(CONFIG_MACH_READYNAS_DT)		+= board-readynas.o
 obj-$(CONFIG_MACH_TOPKICK_DT)		+= board-usi_topkick.o
diff --git a/arch/arm/mach-kirkwood/board-nsa310.c b/arch/arm/mach-kirkwood/board-nsa310.c
deleted file mode 100644
index 55ade93..0000000
--- a/arch/arm/mach-kirkwood/board-nsa310.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/nsa-310-setup.c
- *
- * ZyXEL NSA-310 Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <mach/kirkwood.h>
-#include <linux/of.h>
-#include "common.h"
-
-static int __init nsa310_pci_init(void)
-{
-	if (of_machine_is_compatible("zyxel,nsa310"))
-		kirkwood_pcie_init(KW_PCIE0);
-
-	return 0;
-}
-
-subsys_initcall(nsa310_pci_init);
-- 
cgit v0.10.2


From 259e234608dbc6c6a673efb5d58a1c036eb9b47a Mon Sep 17 00:00:00 2001
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Wed, 15 May 2013 15:37:00 +0200
Subject: arm: kirkwood: convert QNAP TS219 to use DT for the PCIe interface

Now that the PCIe mvebu driver is usable on Kirkwood, use it instead
of the legacy PCIe code, since it allows to describe the PCIe
interfaces in the Device Tree.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
index 8295c83..42648ab 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts
+++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
@@ -1,7 +1,8 @@
 /dts-v1/;
 
-/include/ "kirkwood-ts219.dtsi"
+/include/ "kirkwood.dtsi"
 /include/ "kirkwood-6281.dtsi"
+/include/ "kirkwood-ts219.dtsi"
 
 / {
 	ocp@f1000000 {
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
index df3f95d..95ceeb9 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts
+++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
@@ -1,7 +1,8 @@
 /dts-v1/;
 
-/include/ "kirkwood-ts219.dtsi"
+/include/ "kirkwood.dtsi"
 /include/ "kirkwood-6282.dtsi"
+/include/ "kirkwood-ts219.dtsi"
 
 / {
 	ocp@f1000000 {
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
index 64ea27c..7c022fd 100644
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -1,5 +1,3 @@
-/include/ "kirkwood.dtsi"
-
 / {
 	model = "QNAP TS219 family";
 	compatible = "qnap,ts219", "marvell,kirkwood";
@@ -74,5 +72,12 @@
 			status = "okay";
 			nr-ports = <2>;
 		};
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
 	};
 };
diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c
index acb0187..4695d5f 100644
--- a/arch/arm/mach-kirkwood/board-ts219.c
+++ b/arch/arm/mach-kirkwood/board-ts219.c
@@ -41,13 +41,3 @@ void __init qnap_dt_ts219_init(void)
 
 	pm_power_off = qnap_tsx1x_power_off;
 }
-
-/* FIXME: Will not work with DT. Maybe use MPP40_GPIO? */
-static int __init ts219_pci_init(void)
-{
-	if (machine_is_ts219())
-		kirkwood_pcie_init(KW_PCIE0);
-
-	return 0;
-}
-subsys_initcall(ts219_pci_init);
-- 
cgit v0.10.2


From 0d0632f523fa040b307688ae421a1debf79af2d7 Mon Sep 17 00:00:00 2001
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Wed, 15 May 2013 15:37:01 +0200
Subject: arm: kirkwood: convert db-88f6281/db-88f6282 to the Device Tree

This commit converts the Marvell DB-88F6281/DB-88F6282 board to the
Device Tree. In fact, the code was supporting two different boards:
one with the 6281 SoC variant, and one with the 6282 SoC variant. The
difference between the two being that the 6281 has one PCIe interface,
and the 6282 has two PCIe interfaces.

In order to handle that with the Device Tree, we create a
'kirkwood-db.dtsi' file that contains the definitions common to both
boards, and 'kirkwood-db-88f6281.dts' and 'kirkwood-db-88f6282.dts'
for the definitions specific to each board. This is similar to what is
done for the QNAP TS219 Kirkwood platform.

We have kept one single Kconfig option, just like it was before.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b9f7121..cc53176 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -64,6 +64,8 @@ dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
 	integratorcp.dtb
 dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
 dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
+	kirkwood-db-88f6281.dtb \
+	kirkwood-db-88f6282.dtb \
 	kirkwood-dns320.dtb \
 	kirkwood-dns325.dtb \
 	kirkwood-dockstar.dtb \
diff --git a/arch/arm/boot/dts/kirkwood-db-88f6281.dts b/arch/arm/boot/dts/kirkwood-db-88f6281.dts
new file mode 100644
index 0000000..9d777ed
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-db-88f6281.dts
@@ -0,0 +1,30 @@
+/*
+ * Marvell DB-88F6281-BP Development Board Setup
+ *
+ * Saeed Bishara <saeed@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/include/ "kirkwood-db.dtsi"
+/include/ "kirkwood-6281.dtsi"
+
+/ {
+	model = "Marvell DB-88F6281-BP Development Board";
+	compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-db-88f6282.dts b/arch/arm/boot/dts/kirkwood-db-88f6282.dts
new file mode 100644
index 0000000..f4c8528
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-db-88f6282.dts
@@ -0,0 +1,34 @@
+/*
+ * Marvell DB-88F6282-BP Development Board Setup
+ *
+ * Saeed Bishara <saeed@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/include/ "kirkwood-db.dtsi"
+/include/ "kirkwood-6282.dtsi"
+
+/ {
+	model = "Marvell DB-88F6282-BP Development Board";
+	compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+
+			pcie@2,0 {
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-db.dtsi b/arch/arm/boot/dts/kirkwood-db.dtsi
new file mode 100644
index 0000000..c87cfb8
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-db.dtsi
@@ -0,0 +1,89 @@
+/*
+ * Marvell DB-{88F6281,88F6282}-BP Development Board Setup
+ *
+ * Saeed Bishara <saeed@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions that are common between the 6281
+ * and 6282 variants of the Marvell Kirkwood Development Board.
+ */
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		pinctrl@10000 {
+			pmx_sdio_gpios: pmx-sdio-gpios {
+				marvell,pins = "mpp37", "mpp38";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			pinctrl-0 = <&pmx_uart0>;
+			pinctrl-names = "default";
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		nand@3000000 {
+			pinctrl-0 = <&pmx_nand>;
+			pinctrl-names = "default";
+			chip-delay = <25>;
+			status = "okay";
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x0 0x100000>;
+			};
+
+			partition@100000 {
+				label = "uImage";
+				reg = <0x100000 0x400000>;
+			};
+
+			partition@500000 {
+				label = "root";
+				reg = <0x500000 0x1fb00000>;
+			};
+		};
+
+		sata@80000 {
+			nr-ports = <2>;
+			status = "okay";
+		};
+
+		ehci@50000 {
+			status = "okay";
+		};
+
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio_gpios>;
+			pinctrl-names = "default";
+			wp-gpios = <&gpio1 5 0>;
+			cd-gpios = <&gpio1 6 0>;
+			status = "okay";
+		};
+
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 267ca95..b56bd3d 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -8,12 +8,6 @@ config MACH_D2NET_V2
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie d2 Network v2 NAS.
 
-config MACH_DB88F6281_BP
-	bool "Marvell DB-88F6281-BP Development Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell DB-88F6281-BP Development Board.
-
 config MACH_DOCKSTAR
 	bool "Seagate FreeAgent DockStar"
 	help
@@ -153,6 +147,13 @@ config MACH_CLOUDBOX_DT
 	  Say 'Y' here if you want your kernel to support the LaCie
 	  CloudBox NAS, using Flattened Device Tree.
 
+config MACH_DB88F628X_BP_DT
+	bool "Marvell DB-88F628x-BP Development Board (Flattened Device Tree)"
+	help
+	  Say 'Y' here if you want your kernel to support the Marvell
+	  DB-88F6281-BP and DB-88F6282-BP Development Board (Flattened
+	  Device Tree).
+
 config MACH_DLINK_KIRKWOOD_DT
 	bool "D-Link Kirkwood-based NAS (Flattened Device Tree)"
 	select ARCH_KIRKWOOD_DT
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 794366e..2fdc3a7 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -1,7 +1,6 @@
 obj-y				+= common.o irq.o pcie.o mpp.o
 
 obj-$(CONFIG_MACH_D2NET_V2)		+= d2net_v2-setup.o lacie_v2-common.o
-obj-$(CONFIG_MACH_DB88F6281_BP)		+= db88f6281-bp-setup.o
 obj-$(CONFIG_MACH_DOCKSTAR)		+= dockstar-setup.o
 obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)	+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_GURUPLUG)		+= guruplug-setup.o
@@ -21,6 +20,7 @@ obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
 
 obj-$(CONFIG_ARCH_KIRKWOOD_DT)		+= board-dt.o
 obj-$(CONFIG_MACH_CLOUDBOX_DT)		+= board-ns2.o
+obj-$(CONFIG_MACH_DB88F628X_BP_DT)	+= board-db88f628x-bp.o
 obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT)	+= board-dnskw.o
 obj-$(CONFIG_MACH_DOCKSTAR_DT)		+= board-dockstar.o
 obj-$(CONFIG_MACH_DREAMPLUG_DT)		+= board-dreamplug.o
diff --git a/arch/arm/mach-kirkwood/board-db88f628x-bp.c b/arch/arm/mach-kirkwood/board-db88f628x-bp.c
new file mode 100644
index 0000000..2f574bc
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-db88f628x-bp.c
@@ -0,0 +1,24 @@
+/*
+ * Saeed Bishara <saeed@marvell.com>
+ *
+ * Marvell DB-88F628{1,2}-BP Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/mv643xx_eth.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data db88f628x_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+void __init db88f628x_init(void)
+{
+	kirkwood_ge00_init(&db88f628x_ge00_data);
+}
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index e9647b8..f5aed1f 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -147,6 +147,10 @@ static void __init kirkwood_dt_init(void)
 	    of_machine_is_compatible("lacie,netspace_v2"))
 		ns2_init();
 
+	if (of_machine_is_compatible("marvell,db-88f6281-bp") ||
+	    of_machine_is_compatible("marvell,db-88f6282-bp"))
+		db88f628x_init();
+
 	if (of_machine_is_compatible("mpl,cec4"))
 		mplcec4_init();
 
@@ -181,6 +185,8 @@ static const char * const kirkwood_dt_board_compat[] = {
 	"lacie,netspace_max_v2",
 	"lacie,netspace_mini_v2",
 	"lacie,netspace_v2",
+	"marvell,db-88f6281-bp",
+	"marvell,db-88f6282-bp",
 	"mpl,cec4",
 	"netgear,readynas-duo-v2",
 	"plathome,openblocks-a6",
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 21da3b1..cbbc0b8 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -119,6 +119,12 @@ void km_kirkwood_init(void);
 static inline void km_kirkwood_init(void) {};
 #endif
 
+#ifdef CONFIG_MACH_DB88F628X_BP_DT
+void db88f628x_init(void);
+#else
+static inline void db88f628x_init(void) {};
+#endif
+
 #ifdef CONFIG_MACH_MPLCEC4_DT
 void mplcec4_init(void);
 #else
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
deleted file mode 100644
index 5a369fe..0000000
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/db88f6281-bp-setup.c
- *
- * Marvell DB-88F6281-BP Development Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sizes.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <linux/platform_data/mmc-mvsdio.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition db88f6281_nand_parts[] = {
-	{
-		.name = "u-boot",
-		.offset = 0,
-		.size = SZ_1M
-	}, {
-		.name = "uImage",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = SZ_4M
-	}, {
-		.name = "root",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = MTDPART_SIZ_FULL
-	},
-};
-
-static struct mv643xx_eth_platform_data db88f6281_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data db88f6281_sata_data = {
-	.n_ports	= 2,
-};
-
-static struct mvsdio_platform_data db88f6281_mvsdio_data = {
-	.gpio_write_protect	= 37,
-	.gpio_card_detect	= 38,
-};
-
-static unsigned int db88f6281_mpp_config[] __initdata = {
-	MPP0_NF_IO2,
-	MPP1_NF_IO3,
-	MPP2_NF_IO4,
-	MPP3_NF_IO5,
-	MPP4_NF_IO6,
-	MPP5_NF_IO7,
-	MPP18_NF_IO0,
-	MPP19_NF_IO1,
-	MPP37_GPIO,
-	MPP38_GPIO,
-	0
-};
-
-static void __init db88f6281_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-	kirkwood_mpp_conf(db88f6281_mpp_config);
-
-	kirkwood_nand_init(ARRAY_AND_SIZE(db88f6281_nand_parts), 25);
-	kirkwood_ehci_init();
-	kirkwood_ge00_init(&db88f6281_ge00_data);
-	kirkwood_sata_init(&db88f6281_sata_data);
-	kirkwood_uart0_init();
-	kirkwood_sdio_init(&db88f6281_mvsdio_data);
-}
-
-static int __init db88f6281_pci_init(void)
-{
-	if (machine_is_db88f6281_bp()) {
-		u32 dev, rev;
-
-		kirkwood_pcie_id(&dev, &rev);
-		if (dev == MV88F6282_DEV_ID)
-			kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
-		else
-			kirkwood_pcie_init(KW_PCIE0);
-	}
-	return 0;
-}
-subsys_initcall(db88f6281_pci_init);
-
-MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board")
-	/* Maintainer: Saeed Bishara <saeed@marvell.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= db88f6281_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.init_time	= kirkwood_timer_init,
-	.restart	= kirkwood_restart,
-MACHINE_END
-- 
cgit v0.10.2