From 87d3af4ac0554afc2e86069d7578f74b12f3f67a Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 26 Mar 2013 12:15:26 +0000 Subject: mfd: arizona: Hold device in reset while ramping supplies Acquire the /RESET GPIO before we enable regulators and hold the device in reset while the regulators power up in order to improve robustness during the initial power up. Also fix the error path so that the device is left in reset while we're at it. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c index 7d1abe7..ae10af7 100644 --- a/drivers/mfd/arizona-core.c +++ b/drivers/mfd/arizona-core.c @@ -504,6 +504,17 @@ int arizona_dev_init(struct arizona *arizona) goto err_early; } + if (arizona->pdata.reset) { + /* Start out with /RESET low to put the chip into reset */ + ret = gpio_request_one(arizona->pdata.reset, + GPIOF_DIR_OUT | GPIOF_INIT_LOW, + "arizona /RESET"); + if (ret != 0) { + dev_err(dev, "Failed to request /RESET: %d\n", ret); + goto err_early; + } + } + ret = regulator_bulk_enable(arizona->num_core_supplies, arizona->core_supplies); if (ret != 0) { @@ -518,18 +529,8 @@ int arizona_dev_init(struct arizona *arizona) goto err_enable; } - if (arizona->pdata.reset) { - /* Start out with /RESET low to put the chip into reset */ - ret = gpio_request_one(arizona->pdata.reset, - GPIOF_DIR_OUT | GPIOF_INIT_LOW, - "arizona /RESET"); - if (ret != 0) { - dev_err(dev, "Failed to request /RESET: %d\n", ret); - goto err_dcvdd; - } - + if (arizona->pdata.reset) gpio_set_value_cansleep(arizona->pdata.reset, 1); - } regcache_cache_only(arizona->regmap, false); @@ -769,10 +770,9 @@ err_irq: arizona_irq_exit(arizona); err_reset: if (arizona->pdata.reset) { - gpio_set_value_cansleep(arizona->pdata.reset, 1); + gpio_set_value_cansleep(arizona->pdata.reset, 0); gpio_free(arizona->pdata.reset); } -err_dcvdd: regulator_disable(arizona->dcvdd); err_enable: regulator_bulk_disable(arizona->num_core_supplies, -- cgit v0.10.2