From ec77e21b91f0393a5201cfd4571a82ab7d64fd29 Mon Sep 17 00:00:00 2001 From: Ryan Mallon Date: Fri, 18 Sep 2009 12:51:40 -0700 Subject: mtd: SST25L (non JEDEC) SPI Flash driver Add support for the non JEDEC SST25L SPI Flash devices. [dwmw2: Some cleanups] Signed-off-by: Andre Renaud Signed-off-by: Ryan Mallon Acked-by: Linus Walleij Cc: Anton Vorontsov Cc: "H Hartley Sweeten" Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index 325fab92..c222514 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -104,6 +104,16 @@ config M25PXX_USE_FAST_READ help This option enables FAST_READ access supported by ST M25Pxx. +config MTD_SST25L + tristate "Support SST25L (non JEDEC) SPI Flash chips" + depends on SPI_MASTER + help + This enables access to the non JEDEC SST25L SPI flash chips, used + for program and data storage. + + Set up your spi devices with the right board-specific platform data, + if you want to specify device partitioning. + config MTD_SLRAM tristate "Uncached system RAM" help diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile index 0993d5c..ab5c9b9 100644 --- a/drivers/mtd/devices/Makefile +++ b/drivers/mtd/devices/Makefile @@ -16,3 +16,4 @@ obj-$(CONFIG_MTD_LART) += lart.o obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o obj-$(CONFIG_MTD_M25P80) += m25p80.o +obj-$(CONFIG_MTD_SST25L) += sst25l.o diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c new file mode 100644 index 0000000..ac7d52b --- /dev/null +++ b/drivers/mtd/devices/sst25l.c @@ -0,0 +1,510 @@ +/* + * sst25l.c + * + * Driver for SST25L SPI Flash chips + * + * Copyright © 2009 Bluewater Systems Ltd + * Author: Andre Renaud + * Author: Ryan Mallon + * + * Based on m25p80.c + * + * This code is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +/* Erases can take up to 3 seconds! */ +#define MAX_READY_WAIT_JIFFIES msecs_to_jiffies(3000) + +#define SST25L_CMD_WRSR 0x01 /* Write status register */ +#define SST25L_CMD_WRDI 0x04 /* Write disable */ +#define SST25L_CMD_RDSR 0x05 /* Read status register */ +#define SST25L_CMD_WREN 0x06 /* Write enable */ +#define SST25L_CMD_READ 0x03 /* High speed read */ + +#define SST25L_CMD_EWSR 0x50 /* Enable write status register */ +#define SST25L_CMD_SECTOR_ERASE 0x20 /* Erase sector */ +#define SST25L_CMD_READ_ID 0x90 /* Read device ID */ +#define SST25L_CMD_AAI_PROGRAM 0xaf /* Auto address increment */ + +#define SST25L_STATUS_BUSY (1 << 0) /* Chip is busy */ +#define SST25L_STATUS_WREN (1 << 1) /* Write enabled */ +#define SST25L_STATUS_BP0 (1 << 2) /* Block protection 0 */ +#define SST25L_STATUS_BP1 (1 << 3) /* Block protection 1 */ + +struct sst25l_flash { + struct spi_device *spi; + struct mutex lock; + struct mtd_info mtd; + + int partitioned; +}; + +struct flash_info { + const char *name; + uint16_t device_id; + unsigned page_size; + unsigned nr_pages; + unsigned erase_size; +}; + +#define to_sst25l_flash(x) container_of(x, struct sst25l_flash, mtd) + +static struct flash_info __initdata sst25l_flash_info[] = { + {"sst25lf020a", 0xbf43, 256, 1024, 4096}, + {"sst25lf040a", 0xbf44, 256, 2048, 4096}, +}; + +static int sst25l_status(struct sst25l_flash *flash, int *status) +{ + unsigned char command, response; + int err; + + command = SST25L_CMD_RDSR; + err = spi_write_then_read(flash->spi, &command, 1, &response, 1); + if (err < 0) + return err; + + *status = response; + return 0; +} + +static int sst25l_write_enable(struct sst25l_flash *flash, int enable) +{ + unsigned char command[2]; + int status, err; + + command[0] = enable ? SST25L_CMD_WREN : SST25L_CMD_WRDI; + err = spi_write(flash->spi, command, 1); + if (err) + return err; + + command[0] = SST25L_CMD_EWSR; + err = spi_write(flash->spi, command, 1); + if (err) + return err; + + command[0] = SST25L_CMD_WRSR; + command[1] = enable ? 0 : SST25L_STATUS_BP0 | SST25L_STATUS_BP1; + err = spi_write(flash->spi, command, 2); + if (err) + return err; + + if (enable) { + err = sst25l_status(flash, &status); + if (err) + return err; + if (!(status & SST25L_STATUS_WREN)) + return -EROFS; + } + + return 0; +} + +static int sst25l_wait_till_ready(struct sst25l_flash *flash) +{ + unsigned long deadline; + int status, err; + + deadline = jiffies + MAX_READY_WAIT_JIFFIES; + do { + err = sst25l_status(flash, &status); + if (err) + return err; + if (!(status & SST25L_STATUS_BUSY)) + return 0; + + cond_resched(); + } while (!time_after_eq(jiffies, deadline)); + + return -ETIMEDOUT; +} + +static int sst25l_erase_sector(struct sst25l_flash *flash, uint32_t offset) +{ + unsigned char command[4]; + int err; + + err = sst25l_write_enable(flash, 1); + if (err) + return err; + + command[0] = SST25L_CMD_SECTOR_ERASE; + command[1] = offset >> 16; + command[2] = offset >> 8; + command[3] = offset; + err = spi_write(flash->spi, command, 4); + if (err) + return err; + + err = sst25l_wait_till_ready(flash); + if (err) + return err; + + return sst25l_write_enable(flash, 0); +} + +static int sst25l_erase(struct mtd_info *mtd, struct erase_info *instr) +{ + struct sst25l_flash *flash = to_sst25l_flash(mtd); + uint32_t addr, end; + int err; + + /* Sanity checks */ + if (instr->addr + instr->len > flash->mtd.size) + return -EINVAL; + + if ((uint32_t)instr->len % mtd->erasesize) + return -EINVAL; + + if ((uint32_t)instr->addr % mtd->erasesize) + return -EINVAL; + + addr = instr->addr; + end = addr + instr->len; + + mutex_lock(&flash->lock); + + err = sst25l_wait_till_ready(flash); + if (err) + return err; + + while (addr < end) { + err = sst25l_erase_sector(flash, addr); + if (err) { + mutex_unlock(&flash->lock); + instr->state = MTD_ERASE_FAILED; + dev_err(&flash->spi->dev, "Erase failed\n"); + return err; + } + + addr += mtd->erasesize; + } + + mutex_unlock(&flash->lock); + + instr->state = MTD_ERASE_DONE; + mtd_erase_callback(instr); + return 0; +} + +static int sst25l_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, unsigned char *buf) +{ + struct sst25l_flash *flash = to_sst25l_flash(mtd); + struct spi_transfer transfer[2]; + struct spi_message message; + unsigned char command[4]; + int ret; + + /* Sanity checking */ + if (len == 0) + return 0; + + if (from + len > flash->mtd.size) + return -EINVAL; + + if (retlen) + *retlen = 0; + + spi_message_init(&message); + memset(&transfer, 0, sizeof(transfer)); + + command[0] = SST25L_CMD_READ; + command[1] = from >> 16; + command[2] = from >> 8; + command[3] = from; + + transfer[0].tx_buf = command; + transfer[0].len = sizeof(command); + spi_message_add_tail(&transfer[0], &message); + + transfer[1].rx_buf = buf; + transfer[1].len = len; + spi_message_add_tail(&transfer[1], &message); + + mutex_lock(&flash->lock); + + /* Wait for previous write/erase to complete */ + ret = sst25l_wait_till_ready(flash); + if (ret) { + mutex_unlock(&flash->lock); + return ret; + } + + spi_sync(flash->spi, &message); + + if (retlen && message.actual_length > sizeof(command)) + *retlen += message.actual_length - sizeof(command); + + mutex_unlock(&flash->lock); + return 0; +} + +static int sst25l_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const unsigned char *buf) +{ + struct sst25l_flash *flash = to_sst25l_flash(mtd); + int i, j, ret, bytes, copied = 0; + unsigned char command[5]; + + /* Sanity checks */ + if (!len) + return 0; + + if (to + len > flash->mtd.size) + return -EINVAL; + + if ((uint32_t)to % mtd->writesize) + return -EINVAL; + + mutex_lock(&flash->lock); + + ret = sst25l_write_enable(flash, 1); + if (ret) + goto out; + + for (i = 0; i < len; i += mtd->writesize) { + ret = sst25l_wait_till_ready(flash); + if (ret) + goto out; + + /* Write the first byte of the page */ + command[0] = SST25L_CMD_AAI_PROGRAM; + command[1] = (to + i) >> 16; + command[2] = (to + i) >> 8; + command[3] = (to + i); + command[4] = buf[i]; + ret = spi_write(flash->spi, command, 5); + if (ret < 0) + goto out; + copied++; + + /* + * Write the remaining bytes using auto address + * increment mode + */ + bytes = min_t(uint32_t, mtd->writesize, len - i); + for (j = 1; j < bytes; j++, copied++) { + ret = sst25l_wait_till_ready(flash); + if (ret) + goto out; + + command[1] = buf[i + j]; + ret = spi_write(flash->spi, command, 2); + if (ret) + goto out; + } + } + +out: + ret = sst25l_write_enable(flash, 0); + + if (retlen) + *retlen = copied; + + mutex_unlock(&flash->lock); + return ret; +} + +static struct flash_info *__init sst25l_match_device(struct spi_device *spi) +{ + struct flash_info *flash_info = NULL; + unsigned char command[4], response; + int i, err; + uint16_t id; + + command[0] = SST25L_CMD_READ_ID; + command[1] = 0; + command[2] = 0; + command[3] = 0; + err = spi_write_then_read(spi, command, sizeof(command), &response, 1); + if (err < 0) { + dev_err(&spi->dev, "error reading device id msb\n"); + return NULL; + } + + id = response << 8; + + command[0] = SST25L_CMD_READ_ID; + command[1] = 0; + command[2] = 0; + command[3] = 1; + err = spi_write_then_read(spi, command, sizeof(command), &response, 1); + if (err < 0) { + dev_err(&spi->dev, "error reading device id lsb\n"); + return NULL; + } + + id |= response; + + for (i = 0; i < ARRAY_SIZE(sst25l_flash_info); i++) + if (sst25l_flash_info[i].device_id == id) + flash_info = &sst25l_flash_info[i]; + + if (!flash_info) + dev_err(&spi->dev, "unknown id %.4x\n", id); + + return flash_info; +} + +static int __init sst25l_probe(struct spi_device *spi) +{ + struct flash_info *flash_info; + struct sst25l_flash *flash; + struct flash_platform_data *data; + int ret, i; + + flash_info = sst25l_match_device(spi); + if (!flash_info) + return -ENODEV; + + flash = kzalloc(sizeof(struct sst25l_flash), GFP_KERNEL); + if (!flash) + return -ENOMEM; + + flash->spi = spi; + mutex_init(&flash->lock); + dev_set_drvdata(&spi->dev, flash); + + data = spi->dev.platform_data; + if (data && data->name) + flash->mtd.name = data->name; + else + flash->mtd.name = dev_name(&spi->dev); + + flash->mtd.type = MTD_NORFLASH; + flash->mtd.flags = MTD_CAP_NORFLASH; + flash->mtd.erasesize = flash_info->erase_size; + flash->mtd.writesize = flash_info->page_size; + flash->mtd.size = flash_info->page_size * flash_info->nr_pages; + flash->mtd.erase = sst25l_erase; + flash->mtd.read = sst25l_read; + flash->mtd.write = sst25l_write; + + dev_info(&spi->dev, "%s (%lld KiB)\n", flash_info->name, + (long long)flash->mtd.size >> 10); + + DEBUG(MTD_DEBUG_LEVEL2, + "mtd .name = %s, .size = 0x%llx (%lldMiB) " + ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n", + flash->mtd.name, + (long long)flash->mtd.size, (long long)(flash->mtd.size >> 20), + flash->mtd.erasesize, flash->mtd.erasesize / 1024, + flash->mtd.numeraseregions); + + if (flash->mtd.numeraseregions) + for (i = 0; i < flash->mtd.numeraseregions; i++) + DEBUG(MTD_DEBUG_LEVEL2, + "mtd.eraseregions[%d] = { .offset = 0x%llx, " + ".erasesize = 0x%.8x (%uKiB), " + ".numblocks = %d }\n", + i, (long long)flash->mtd.eraseregions[i].offset, + flash->mtd.eraseregions[i].erasesize, + flash->mtd.eraseregions[i].erasesize / 1024, + flash->mtd.eraseregions[i].numblocks); + + if (mtd_has_partitions()) { + struct mtd_partition *parts = NULL; + int nr_parts = 0; + + if (mtd_has_cmdlinepart()) { + static const char *part_probes[] = + {"cmdlinepart", NULL}; + + nr_parts = parse_mtd_partitions(&flash->mtd, + part_probes, + &parts, 0); + } + + if (nr_parts <= 0 && data && data->parts) { + parts = data->parts; + nr_parts = data->nr_parts; + } + + if (nr_parts > 0) { + for (i = 0; i < nr_parts; i++) { + DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = " + "{.name = %s, .offset = 0x%llx, " + ".size = 0x%llx (%lldKiB) }\n", + i, parts[i].name, + (long long)parts[i].offset, + (long long)parts[i].size, + (long long)(parts[i].size >> 10)); + } + + flash->partitioned = 1; + return add_mtd_partitions(&flash->mtd, + parts, nr_parts); + } + + } else if (data->nr_parts) { + dev_warn(&spi->dev, "ignoring %d default partitions on %s\n", + data->nr_parts, data->name); + } + + ret = add_mtd_device(&flash->mtd); + if (ret == 1) { + kfree(flash); + dev_set_drvdata(&spi->dev, NULL); + return -ENODEV; + } + + return 0; +} + +static int __exit sst25l_remove(struct spi_device *spi) +{ + struct sst25l_flash *flash = dev_get_drvdata(&spi->dev); + int ret; + + if (mtd_has_partitions() && flash->partitioned) + ret = del_mtd_partitions(&flash->mtd); + else + ret = del_mtd_device(&flash->mtd); + if (ret == 0) + kfree(flash); + return ret; +} + +static struct spi_driver sst25l_driver = { + .driver = { + .name = "sst25l", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = sst25l_probe, + .remove = __exit_p(sst25l_remove), +}; + +static int __init sst25l_init(void) +{ + return spi_register_driver(&sst25l_driver); +} + +static void __exit sst25l_exit(void) +{ + spi_unregister_driver(&sst25l_driver); +} + +module_init(sst25l_init); +module_exit(sst25l_exit); + +MODULE_DESCRIPTION("MTD SPI driver for SST25L Flash chips"); +MODULE_AUTHOR("Andre Renaud , " + "Ryan Mallon "); +MODULE_LICENSE("GPL"); -- cgit v0.10.2