From 23d3e7a6598066ed39771cf2030c6bbb581c7812 Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Sat, 21 Nov 2009 12:14:48 +0100 Subject: USB: MXC: Add i.MX21 specific USB host controller driver. This driver is a Full / Low speed only USB host for the i.MX21. Signed-off-by: Martin Fuzzey Signed-off-by: Greg Kroah-Hartman diff --git a/arch/arm/plat-mxc/include/mach/mx21-usbhost.h b/arch/arm/plat-mxc/include/mach/mx21-usbhost.h new file mode 100644 index 0000000..22d0b59 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/mx21-usbhost.h @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2009 Martin Fuzzey + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_MX21_USBH +#define __ASM_ARCH_MX21_USBH + +enum mx21_usbh_xcvr { + /* Values below as used by hardware (HWMODE register) */ + MX21_USBXCVR_TXDIF_RXDIF = 0, + MX21_USBXCVR_TXDIF_RXSE = 1, + MX21_USBXCVR_TXSE_RXDIF = 2, + MX21_USBXCVR_TXSE_RXSE = 3, +}; + +struct mx21_usbh_platform_data { + enum mx21_usbh_xcvr host_xcvr; /* tranceiver mode host 1,2 ports */ + enum mx21_usbh_xcvr otg_xcvr; /* tranceiver mode otg (as host) port */ + u16 enable_host1:1, + enable_host2:1, + enable_otg_host:1, /* enable "OTG" port (as host) */ + host1_xcverless:1, /* traceiverless host1 port */ + host1_txenoe:1, /* output enable host1 transmit enable */ + otg_ext_xcvr:1, /* external tranceiver for OTG port */ + unused:10; +}; + +#endif /* __ASM_ARCH_MX21_USBH */ diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index be3c9b8..80b4008 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_USB_U132_HCD) += host/ obj-$(CONFIG_USB_R8A66597_HCD) += host/ obj-$(CONFIG_USB_HWA_HCD) += host/ obj-$(CONFIG_USB_ISP1760_HCD) += host/ +obj-$(CONFIG_USB_IMX21_HCD) += host/ obj-$(CONFIG_USB_C67X00_HCD) += c67x00/ diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 2678a16..8d3df03 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -399,3 +399,14 @@ config USB_HWA_HCD To compile this driver a module, choose M here: the module will be called "hwa-hc". + +config USB_IMX21_HCD + tristate "iMX21 HCD support" + depends on USB && ARM && MACH_MX21 + help + This driver enables support for the on-chip USB host in the + iMX21 processor. + + To compile this driver as a module, choose M here: the + module will be called "imx21-hcd". + diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index f58b249..4e0c67f 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -32,3 +32,5 @@ obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o +obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o + diff --git a/drivers/usb/host/imx21-dbg.c b/drivers/usb/host/imx21-dbg.c new file mode 100644 index 0000000..512f647 --- /dev/null +++ b/drivers/usb/host/imx21-dbg.c @@ -0,0 +1,527 @@ +/* + * Copyright (c) 2009 by Martin Fuzzey + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* this file is part of imx21-hcd.c */ + +#ifndef DEBUG + +static inline void create_debug_files(struct imx21 *imx21) { } +static inline void remove_debug_files(struct imx21 *imx21) { } +static inline void debug_urb_submitted(struct imx21 *imx21, struct urb *urb) {} +static inline void debug_urb_completed(struct imx21 *imx21, struct urb *urb, + int status) {} +static inline void debug_urb_unlinked(struct imx21 *imx21, struct urb *urb) {} +static inline void debug_urb_queued_for_etd(struct imx21 *imx21, + struct urb *urb) {} +static inline void debug_urb_queued_for_dmem(struct imx21 *imx21, + struct urb *urb) {} +static inline void debug_etd_allocated(struct imx21 *imx21) {} +static inline void debug_etd_freed(struct imx21 *imx21) {} +static inline void debug_dmem_allocated(struct imx21 *imx21, int size) {} +static inline void debug_dmem_freed(struct imx21 *imx21, int size) {} +static inline void debug_isoc_submitted(struct imx21 *imx21, + int frame, struct td *td) {} +static inline void debug_isoc_completed(struct imx21 *imx21, + int frame, struct td *td, int cc, int len) {} + +#else + +#include +#include + +static const char *dir_labels[] = { + "TD 0", + "OUT", + "IN", + "TD 1" +}; + +static const char *speed_labels[] = { + "Full", + "Low" +}; + +static const char *format_labels[] = { + "Control", + "ISO", + "Bulk", + "Interrupt" +}; + +static inline struct debug_stats *stats_for_urb(struct imx21 *imx21, + struct urb *urb) +{ + return usb_pipeisoc(urb->pipe) ? + &imx21->isoc_stats : &imx21->nonisoc_stats; +} + +static void debug_urb_submitted(struct imx21 *imx21, struct urb *urb) +{ + stats_for_urb(imx21, urb)->submitted++; +} + +static void debug_urb_completed(struct imx21 *imx21, struct urb *urb, int st) +{ + if (st) + stats_for_urb(imx21, urb)->completed_failed++; + else + stats_for_urb(imx21, urb)->completed_ok++; +} + +static void debug_urb_unlinked(struct imx21 *imx21, struct urb *urb) +{ + stats_for_urb(imx21, urb)->unlinked++; +} + +static void debug_urb_queued_for_etd(struct imx21 *imx21, struct urb *urb) +{ + stats_for_urb(imx21, urb)->queue_etd++; +} + +static void debug_urb_queued_for_dmem(struct imx21 *imx21, struct urb *urb) +{ + stats_for_urb(imx21, urb)->queue_dmem++; +} + +static inline void debug_etd_allocated(struct imx21 *imx21) +{ + imx21->etd_usage.maximum = max( + ++(imx21->etd_usage.value), + imx21->etd_usage.maximum); +} + +static inline void debug_etd_freed(struct imx21 *imx21) +{ + imx21->etd_usage.value--; +} + +static inline void debug_dmem_allocated(struct imx21 *imx21, int size) +{ + imx21->dmem_usage.value += size; + imx21->dmem_usage.maximum = max( + imx21->dmem_usage.value, + imx21->dmem_usage.maximum); +} + +static inline void debug_dmem_freed(struct imx21 *imx21, int size) +{ + imx21->dmem_usage.value -= size; +} + + +static void debug_isoc_submitted(struct imx21 *imx21, + int frame, struct td *td) +{ + struct debug_isoc_trace *trace = &imx21->isoc_trace[ + imx21->isoc_trace_index++]; + + imx21->isoc_trace_index %= ARRAY_SIZE(imx21->isoc_trace); + trace->schedule_frame = td->frame; + trace->submit_frame = frame; + trace->request_len = td->len; + trace->td = td; +} + +static inline void debug_isoc_completed(struct imx21 *imx21, + int frame, struct td *td, int cc, int len) +{ + struct debug_isoc_trace *trace, *trace_failed; + int i; + int found = 0; + + trace = imx21->isoc_trace; + for (i = 0; i < ARRAY_SIZE(imx21->isoc_trace); i++, trace++) { + if (trace->td == td) { + trace->done_frame = frame; + trace->done_len = len; + trace->cc = cc; + trace->td = NULL; + found = 1; + break; + } + } + + if (found && cc) { + trace_failed = &imx21->isoc_trace_failed[ + imx21->isoc_trace_index_failed++]; + + imx21->isoc_trace_index_failed %= ARRAY_SIZE( + imx21->isoc_trace_failed); + *trace_failed = *trace; + } +} + + +static char *format_ep(struct usb_host_endpoint *ep, char *buf, int bufsize) +{ + if (ep) + snprintf(buf, bufsize, "ep_%02x (type:%02X kaddr:%p)", + ep->desc.bEndpointAddress, + usb_endpoint_type(&ep->desc), + ep); + else + snprintf(buf, bufsize, "none"); + return buf; +} + +static char *format_etd_dword0(u32 value, char *buf, int bufsize) +{ + snprintf(buf, bufsize, + "addr=%d ep=%d dir=%s speed=%s format=%s halted=%d", + value & 0x7F, + (value >> DW0_ENDPNT) & 0x0F, + dir_labels[(value >> DW0_DIRECT) & 0x03], + speed_labels[(value >> DW0_SPEED) & 0x01], + format_labels[(value >> DW0_FORMAT) & 0x03], + (value >> DW0_HALTED) & 0x01); + return buf; +} + +static int debug_status_show(struct seq_file *s, void *v) +{ + struct imx21 *imx21 = s->private; + int etds_allocated = 0; + int etds_sw_busy = 0; + int etds_hw_busy = 0; + int dmem_blocks = 0; + int queued_for_etd = 0; + int queued_for_dmem = 0; + unsigned int dmem_bytes = 0; + int i; + struct etd_priv *etd; + u32 etd_enable_mask; + unsigned long flags; + struct imx21_dmem_area *dmem; + struct ep_priv *ep_priv; + + spin_lock_irqsave(&imx21->lock, flags); + + etd_enable_mask = readl(imx21->regs + USBH_ETDENSET); + for (i = 0, etd = imx21->etd; i < USB_NUM_ETD; i++, etd++) { + if (etd->alloc) + etds_allocated++; + if (etd->urb) + etds_sw_busy++; + if (etd_enable_mask & (1<dmem_list, list) { + dmem_bytes += dmem->size; + dmem_blocks++; + } + + list_for_each_entry(ep_priv, &imx21->queue_for_etd, queue) + queued_for_etd++; + + list_for_each_entry(etd, &imx21->queue_for_dmem, queue) + queued_for_dmem++; + + spin_unlock_irqrestore(&imx21->lock, flags); + + seq_printf(s, + "Frame: %d\n" + "ETDs allocated: %d/%d (max=%d)\n" + "ETDs in use sw: %d\n" + "ETDs in use hw: %d\n" + "DMEM alocated: %d/%d (max=%d)\n" + "DMEM blocks: %d\n" + "Queued waiting for ETD: %d\n" + "Queued waiting for DMEM: %d\n", + readl(imx21->regs + USBH_FRMNUB) & 0xFFFF, + etds_allocated, USB_NUM_ETD, imx21->etd_usage.maximum, + etds_sw_busy, + etds_hw_busy, + dmem_bytes, DMEM_SIZE, imx21->dmem_usage.maximum, + dmem_blocks, + queued_for_etd, + queued_for_dmem); + + return 0; +} + +static int debug_dmem_show(struct seq_file *s, void *v) +{ + struct imx21 *imx21 = s->private; + struct imx21_dmem_area *dmem; + unsigned long flags; + char ep_text[40]; + + spin_lock_irqsave(&imx21->lock, flags); + + list_for_each_entry(dmem, &imx21->dmem_list, list) + seq_printf(s, + "%04X: size=0x%X " + "ep=%s\n", + dmem->offset, dmem->size, + format_ep(dmem->ep, ep_text, sizeof(ep_text))); + + spin_unlock_irqrestore(&imx21->lock, flags); + + return 0; +} + +static int debug_etd_show(struct seq_file *s, void *v) +{ + struct imx21 *imx21 = s->private; + struct etd_priv *etd; + char buf[60]; + u32 dword; + int i, j; + unsigned long flags; + + spin_lock_irqsave(&imx21->lock, flags); + + for (i = 0, etd = imx21->etd; i < USB_NUM_ETD; i++, etd++) { + int state = -1; + struct urb_priv *urb_priv; + if (etd->urb) { + urb_priv = etd->urb->hcpriv; + if (urb_priv) + state = urb_priv->state; + } + + seq_printf(s, + "etd_num: %d\n" + "ep: %s\n" + "alloc: %d\n" + "len: %d\n" + "busy sw: %d\n" + "busy hw: %d\n" + "urb state: %d\n" + "current urb: %p\n", + + i, + format_ep(etd->ep, buf, sizeof(buf)), + etd->alloc, + etd->len, + etd->urb != NULL, + (readl(imx21->regs + USBH_ETDENSET) & (1 << i)) > 0, + state, + etd->urb); + + for (j = 0; j < 4; j++) { + dword = etd_readl(imx21, i, j); + switch (j) { + case 0: + format_etd_dword0(dword, buf, sizeof(buf)); + break; + case 2: + snprintf(buf, sizeof(buf), + "cc=0X%02X", dword >> DW2_COMPCODE); + break; + default: + *buf = 0; + break; + } + seq_printf(s, + "dword %d: submitted=%08X cur=%08X [%s]\n", + j, + etd->submitted_dwords[j], + dword, + buf); + } + seq_printf(s, "\n"); + } + + spin_unlock_irqrestore(&imx21->lock, flags); + + return 0; +} + +static void debug_statistics_show_one(struct seq_file *s, + const char *name, struct debug_stats *stats) +{ + seq_printf(s, "%s:\n" + "submitted URBs: %lu\n" + "completed OK: %lu\n" + "completed failed: %lu\n" + "unlinked: %lu\n" + "queued for ETD: %lu\n" + "queued for DMEM: %lu\n\n", + name, + stats->submitted, + stats->completed_ok, + stats->completed_failed, + stats->unlinked, + stats->queue_etd, + stats->queue_dmem); +} + +static int debug_statistics_show(struct seq_file *s, void *v) +{ + struct imx21 *imx21 = s->private; + unsigned long flags; + + spin_lock_irqsave(&imx21->lock, flags); + + debug_statistics_show_one(s, "nonisoc", &imx21->nonisoc_stats); + debug_statistics_show_one(s, "isoc", &imx21->isoc_stats); + seq_printf(s, "unblock kludge triggers: %lu\n", imx21->debug_unblocks); + spin_unlock_irqrestore(&imx21->lock, flags); + + return 0; +} + +static void debug_isoc_show_one(struct seq_file *s, + const char *name, int index, struct debug_isoc_trace *trace) +{ + seq_printf(s, "%s %d:\n" + "cc=0X%02X\n" + "scheduled frame %d (%d)\n" + "submittted frame %d (%d)\n" + "completed frame %d (%d)\n" + "requested length=%d\n" + "completed length=%d\n\n", + name, index, + trace->cc, + trace->schedule_frame, trace->schedule_frame & 0xFFFF, + trace->submit_frame, trace->submit_frame & 0xFFFF, + trace->done_frame, trace->done_frame & 0xFFFF, + trace->request_len, + trace->done_len); +} + +static int debug_isoc_show(struct seq_file *s, void *v) +{ + struct imx21 *imx21 = s->private; + struct debug_isoc_trace *trace; + unsigned long flags; + int i; + + spin_lock_irqsave(&imx21->lock, flags); + + trace = imx21->isoc_trace_failed; + for (i = 0; i < ARRAY_SIZE(imx21->isoc_trace_failed); i++, trace++) + debug_isoc_show_one(s, "isoc failed", i, trace); + + trace = imx21->isoc_trace; + for (i = 0; i < ARRAY_SIZE(imx21->isoc_trace); i++, trace++) + debug_isoc_show_one(s, "isoc", i, trace); + + spin_unlock_irqrestore(&imx21->lock, flags); + + return 0; +} + +static int debug_status_open(struct inode *inode, struct file *file) +{ + return single_open(file, debug_status_show, inode->i_private); +} + +static int debug_dmem_open(struct inode *inode, struct file *file) +{ + return single_open(file, debug_dmem_show, inode->i_private); +} + +static int debug_etd_open(struct inode *inode, struct file *file) +{ + return single_open(file, debug_etd_show, inode->i_private); +} + +static int debug_statistics_open(struct inode *inode, struct file *file) +{ + return single_open(file, debug_statistics_show, inode->i_private); +} + +static int debug_isoc_open(struct inode *inode, struct file *file) +{ + return single_open(file, debug_isoc_show, inode->i_private); +} + +static const struct file_operations debug_status_fops = { + .open = debug_status_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct file_operations debug_dmem_fops = { + .open = debug_dmem_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct file_operations debug_etd_fops = { + .open = debug_etd_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct file_operations debug_statistics_fops = { + .open = debug_statistics_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct file_operations debug_isoc_fops = { + .open = debug_isoc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void create_debug_files(struct imx21 *imx21) +{ + imx21->debug_root = debugfs_create_dir(dev_name(imx21->dev), NULL); + if (!imx21->debug_root) + goto failed_create_rootdir; + + if (!debugfs_create_file("status", S_IRUGO, + imx21->debug_root, imx21, &debug_status_fops)) + goto failed_create; + + if (!debugfs_create_file("dmem", S_IRUGO, + imx21->debug_root, imx21, &debug_dmem_fops)) + goto failed_create; + + if (!debugfs_create_file("etd", S_IRUGO, + imx21->debug_root, imx21, &debug_etd_fops)) + goto failed_create; + + if (!debugfs_create_file("statistics", S_IRUGO, + imx21->debug_root, imx21, &debug_statistics_fops)) + goto failed_create; + + if (!debugfs_create_file("isoc", S_IRUGO, + imx21->debug_root, imx21, &debug_isoc_fops)) + goto failed_create; + + return; + +failed_create: + debugfs_remove_recursive(imx21->debug_root); + +failed_create_rootdir: + imx21->debug_root = NULL; +} + + +static void remove_debug_files(struct imx21 *imx21) +{ + if (imx21->debug_root) { + debugfs_remove_recursive(imx21->debug_root); + imx21->debug_root = NULL; + } +} + +#endif + diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c new file mode 100644 index 0000000..213e270 --- /dev/null +++ b/drivers/usb/host/imx21-hcd.c @@ -0,0 +1,1789 @@ +/* + * USB Host Controller Driver for IMX21 + * + * Copyright (C) 2006 Loping Dog Embedded Systems + * Copyright (C) 2009 Martin Fuzzey + * Originally written by Jay Monkman + * Ported to 2.6.30, debugged and enhanced by Martin Fuzzey + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + + /* + * The i.MX21 USB hardware contains + * * 32 transfer descriptors (called ETDs) + * * 4Kb of Data memory + * + * The data memory is shared between the host and fuction controlers + * (but this driver only supports the host controler) + * + * So setting up a transfer involves: + * * Allocating a ETD + * * Fill in ETD with appropriate information + * * Allocating data memory (and putting the offset in the ETD) + * * Activate the ETD + * * Get interrupt when done. + * + * An ETD is assigned to each active endpoint. + * + * Low resource (ETD and Data memory) situations are handled differently for + * isochronous and non insosynchronous transactions : + * + * Non ISOC transfers are queued if either ETDs or Data memory are unavailable + * + * ISOC transfers use 2 ETDs per endpoint to achieve double buffering. + * They allocate both ETDs and Data memory during URB submission + * (and fail if unavailable). + */ + +#include +#include +#include +#include +#include +#include + +#include "../core/hcd.h" +#include "imx21-hcd.h" + +#ifdef DEBUG +#define DEBUG_LOG_FRAME(imx21, etd, event) \ + (etd)->event##_frame = readl((imx21)->regs + USBH_FRMNUB) +#else +#define DEBUG_LOG_FRAME(imx21, etd, event) do { } while (0) +#endif + +static const char hcd_name[] = "imx21-hcd"; + +static inline struct imx21 *hcd_to_imx21(struct usb_hcd *hcd) +{ + return (struct imx21 *)hcd->hcd_priv; +} + + +/* =========================================== */ +/* Hardware access helpers */ +/* =========================================== */ + +static inline void set_register_bits(struct imx21 *imx21, u32 offset, u32 mask) +{ + void __iomem *reg = imx21->regs + offset; + writel(readl(reg) | mask, reg); +} + +static inline void clear_register_bits(struct imx21 *imx21, + u32 offset, u32 mask) +{ + void __iomem *reg = imx21->regs + offset; + writel(readl(reg) & ~mask, reg); +} + +static inline void clear_toggle_bit(struct imx21 *imx21, u32 offset, u32 mask) +{ + void __iomem *reg = imx21->regs + offset; + + if (readl(reg) & mask) + writel(mask, reg); +} + +static inline void set_toggle_bit(struct imx21 *imx21, u32 offset, u32 mask) +{ + void __iomem *reg = imx21->regs + offset; + + if (!(readl(reg) & mask)) + writel(mask, reg); +} + +static void etd_writel(struct imx21 *imx21, int etd_num, int dword, u32 value) +{ + writel(value, imx21->regs + USB_ETD_DWORD(etd_num, dword)); +} + +static u32 etd_readl(struct imx21 *imx21, int etd_num, int dword) +{ + return readl(imx21->regs + USB_ETD_DWORD(etd_num, dword)); +} + +static inline int wrap_frame(int counter) +{ + return counter & 0xFFFF; +} + +static inline int frame_after(int frame, int after) +{ + /* handle wrapping like jiffies time_afer */ + return (s16)((s16)after - (s16)frame) < 0; +} + +static int imx21_hc_get_frame(struct usb_hcd *hcd) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + + return wrap_frame(readl(imx21->regs + USBH_FRMNUB)); +} + + +#include "imx21-dbg.c" + +/* =========================================== */ +/* ETD management */ +/* =========================================== */ + +static int alloc_etd(struct imx21 *imx21) +{ + int i; + struct etd_priv *etd = imx21->etd; + + for (i = 0; i < USB_NUM_ETD; i++, etd++) { + if (etd->alloc == 0) { + memset(etd, 0, sizeof(imx21->etd[0])); + etd->alloc = 1; + debug_etd_allocated(imx21); + return i; + } + } + return -1; +} + +static void disactivate_etd(struct imx21 *imx21, int num) +{ + int etd_mask = (1 << num); + struct etd_priv *etd = &imx21->etd[num]; + + writel(etd_mask, imx21->regs + USBH_ETDENCLR); + clear_register_bits(imx21, USBH_ETDDONEEN, etd_mask); + writel(etd_mask, imx21->regs + USB_ETDDMACHANLCLR); + clear_toggle_bit(imx21, USBH_ETDDONESTAT, etd_mask); + + etd->active_count = 0; + + DEBUG_LOG_FRAME(imx21, etd, disactivated); +} + +static void reset_etd(struct imx21 *imx21, int num) +{ + struct etd_priv *etd = imx21->etd + num; + int i; + + disactivate_etd(imx21, num); + + for (i = 0; i < 4; i++) + etd_writel(imx21, num, i, 0); + etd->urb = NULL; + etd->ep = NULL; + etd->td = NULL;; +} + +static void free_etd(struct imx21 *imx21, int num) +{ + if (num < 0) + return; + + if (num >= USB_NUM_ETD) { + dev_err(imx21->dev, "BAD etd=%d!\n", num); + return; + } + if (imx21->etd[num].alloc == 0) { + dev_err(imx21->dev, "ETD %d already free!\n", num); + return; + } + + debug_etd_freed(imx21); + reset_etd(imx21, num); + memset(&imx21->etd[num], 0, sizeof(imx21->etd[0])); +} + + +static void setup_etd_dword0(struct imx21 *imx21, + int etd_num, struct urb *urb, u8 dir, u16 maxpacket) +{ + etd_writel(imx21, etd_num, 0, + ((u32) usb_pipedevice(urb->pipe)) << DW0_ADDRESS | + ((u32) usb_pipeendpoint(urb->pipe) << DW0_ENDPNT) | + ((u32) dir << DW0_DIRECT) | + ((u32) ((urb->dev->speed == USB_SPEED_LOW) ? + 1 : 0) << DW0_SPEED) | + ((u32) fmt_urb_to_etd[usb_pipetype(urb->pipe)] << DW0_FORMAT) | + ((u32) maxpacket << DW0_MAXPKTSIZ)); +} + +static void activate_etd(struct imx21 *imx21, + int etd_num, dma_addr_t dma, u8 dir) +{ + u32 etd_mask = 1 << etd_num; + struct etd_priv *etd = &imx21->etd[etd_num]; + + clear_toggle_bit(imx21, USBH_ETDDONESTAT, etd_mask); + set_register_bits(imx21, USBH_ETDDONEEN, etd_mask); + clear_toggle_bit(imx21, USBH_XFILLSTAT, etd_mask); + clear_toggle_bit(imx21, USBH_YFILLSTAT, etd_mask); + + if (dma) { + set_register_bits(imx21, USB_ETDDMACHANLCLR, etd_mask); + clear_toggle_bit(imx21, USBH_XBUFSTAT, etd_mask); + clear_toggle_bit(imx21, USBH_YBUFSTAT, etd_mask); + writel(dma, imx21->regs + USB_ETDSMSA(etd_num)); + set_register_bits(imx21, USB_ETDDMAEN, etd_mask); + } else { + if (dir != TD_DIR_IN) { + /* need to set for ZLP */ + set_toggle_bit(imx21, USBH_XFILLSTAT, etd_mask); + set_toggle_bit(imx21, USBH_YFILLSTAT, etd_mask); + } + } + + DEBUG_LOG_FRAME(imx21, etd, activated); + +#ifdef DEBUG + if (!etd->active_count) { + int i; + etd->activated_frame = readl(imx21->regs + USBH_FRMNUB); + etd->disactivated_frame = -1; + etd->last_int_frame = -1; + etd->last_req_frame = -1; + + for (i = 0; i < 4; i++) + etd->submitted_dwords[i] = etd_readl(imx21, etd_num, i); + } +#endif + + etd->active_count = 1; + writel(etd_mask, imx21->regs + USBH_ETDENSET); +} + +/* =========================================== */ +/* Data memory management */ +/* =========================================== */ + +static int alloc_dmem(struct imx21 *imx21, unsigned int size, + struct usb_host_endpoint *ep) +{ + unsigned int offset = 0; + struct imx21_dmem_area *area; + struct imx21_dmem_area *tmp; + + size += (~size + 1) & 0x3; /* Round to 4 byte multiple */ + + if (size > DMEM_SIZE) { + dev_err(imx21->dev, "size=%d > DMEM_SIZE(%d)\n", + size, DMEM_SIZE); + return -EINVAL; + } + + list_for_each_entry(tmp, &imx21->dmem_list, list) { + if ((size + offset) < offset) + goto fail; + if ((size + offset) <= tmp->offset) + break; + offset = tmp->size + tmp->offset; + if ((offset + size) > DMEM_SIZE) + goto fail; + } + + area = kmalloc(sizeof(struct imx21_dmem_area), GFP_ATOMIC); + if (area == NULL) + return -ENOMEM; + + area->ep = ep; + area->offset = offset; + area->size = size; + list_add_tail(&area->list, &tmp->list); + debug_dmem_allocated(imx21, size); + return offset; + +fail: + return -ENOMEM; +} + +/* Memory now available for a queued ETD - activate it */ +static void activate_queued_etd(struct imx21 *imx21, + struct etd_priv *etd, u32 dmem_offset) +{ + struct urb_priv *urb_priv = etd->urb->hcpriv; + int etd_num = etd - &imx21->etd[0]; + u32 maxpacket = etd_readl(imx21, etd_num, 1) >> DW1_YBUFSRTAD; + u8 dir = (etd_readl(imx21, etd_num, 2) >> DW2_DIRPID) & 0x03; + + dev_dbg(imx21->dev, "activating queued ETD %d now DMEM available\n", + etd_num); + etd_writel(imx21, etd_num, 1, + ((dmem_offset + maxpacket) << DW1_YBUFSRTAD) | dmem_offset); + + urb_priv->active = 1; + activate_etd(imx21, etd_num, etd->dma_handle, dir); +} + +static void free_dmem(struct imx21 *imx21, int offset) +{ + struct imx21_dmem_area *area; + struct etd_priv *etd, *tmp; + int found = 0; + + list_for_each_entry(area, &imx21->dmem_list, list) { + if (area->offset == offset) { + debug_dmem_freed(imx21, area->size); + list_del(&area->list); + kfree(area); + found = 1; + break; + } + } + + if (!found) { + dev_err(imx21->dev, + "Trying to free unallocated DMEM %d\n", offset); + return; + } + + /* Try again to allocate memory for anything we've queued */ + list_for_each_entry_safe(etd, tmp, &imx21->queue_for_dmem, queue) { + offset = alloc_dmem(imx21, etd->dmem_size, etd->ep); + if (offset >= 0) { + list_del(&etd->queue); + activate_queued_etd(imx21, etd, (u32)offset); + } + } +} + +static void free_epdmem(struct imx21 *imx21, struct usb_host_endpoint *ep) +{ + struct imx21_dmem_area *area, *tmp; + + list_for_each_entry_safe(area, tmp, &imx21->dmem_list, list) { + if (area->ep == ep) { + dev_err(imx21->dev, + "Active DMEM %d for disabled ep=%p\n", + area->offset, ep); + list_del(&area->list); + kfree(area); + } + } +} + + +/* =========================================== */ +/* End handling */ +/* =========================================== */ +static void schedule_nonisoc_etd(struct imx21 *imx21, struct urb *urb); + +/* Endpoint now idle - release it's ETD(s) or asssign to queued request */ +static void ep_idle(struct imx21 *imx21, struct ep_priv *ep_priv) +{ + int etd_num; + int i; + + for (i = 0; i < NUM_ISO_ETDS; i++) { + etd_num = ep_priv->etd[i]; + if (etd_num < 0) + continue; + + ep_priv->etd[i] = -1; + if (list_empty(&imx21->queue_for_etd)) { + free_etd(imx21, etd_num); + continue; + } + + dev_dbg(imx21->dev, + "assigning idle etd %d for queued request\n", etd_num); + ep_priv = list_first_entry(&imx21->queue_for_etd, + struct ep_priv, queue); + list_del(&ep_priv->queue); + reset_etd(imx21, etd_num); + ep_priv->waiting_etd = 0; + ep_priv->etd[i] = etd_num; + + if (list_empty(&ep_priv->ep->urb_list)) { + dev_err(imx21->dev, "No urb for queued ep!\n"); + continue; + } + schedule_nonisoc_etd(imx21, list_first_entry( + &ep_priv->ep->urb_list, struct urb, urb_list)); + } +} + +static void urb_done(struct usb_hcd *hcd, struct urb *urb, int status) +__releases(imx21->lock) +__acquires(imx21->lock) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + struct ep_priv *ep_priv = urb->ep->hcpriv; + struct urb_priv *urb_priv = urb->hcpriv; + + debug_urb_completed(imx21, urb, status); + dev_vdbg(imx21->dev, "urb %p done %d\n", urb, status); + + kfree(urb_priv->isoc_td); + kfree(urb->hcpriv); + urb->hcpriv = NULL; + usb_hcd_unlink_urb_from_ep(hcd, urb); + spin_unlock(&imx21->lock); + usb_hcd_giveback_urb(hcd, urb, status); + spin_lock(&imx21->lock); + if (list_empty(&ep_priv->ep->urb_list)) + ep_idle(imx21, ep_priv); +} + +/* =========================================== */ +/* ISOC Handling ... */ +/* =========================================== */ + +static void schedule_isoc_etds(struct usb_hcd *hcd, + struct usb_host_endpoint *ep) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + struct ep_priv *ep_priv = ep->hcpriv; + struct etd_priv *etd; + struct urb_priv *urb_priv; + struct td *td; + int etd_num; + int i; + int cur_frame; + u8 dir; + + for (i = 0; i < NUM_ISO_ETDS; i++) { +too_late: + if (list_empty(&ep_priv->td_list)) + break; + + etd_num = ep_priv->etd[i]; + if (etd_num < 0) + break; + + etd = &imx21->etd[etd_num]; + if (etd->urb) + continue; + + td = list_entry(ep_priv->td_list.next, struct td, list); + list_del(&td->list); + urb_priv = td->urb->hcpriv; + + cur_frame = imx21_hc_get_frame(hcd); + if (frame_after(cur_frame, td->frame)) { + dev_dbg(imx21->dev, "isoc too late frame %d > %d\n", + cur_frame, td->frame); + urb_priv->isoc_status = -EXDEV; + td->urb->iso_frame_desc[ + td->isoc_index].actual_length = 0; + td->urb->iso_frame_desc[td->isoc_index].status = -EXDEV; + if (--urb_priv->isoc_remaining == 0) + urb_done(hcd, td->urb, urb_priv->isoc_status); + goto too_late; + } + + urb_priv->active = 1; + etd->td = td; + etd->ep = td->ep; + etd->urb = td->urb; + etd->len = td->len; + + debug_isoc_submitted(imx21, cur_frame, td); + + dir = usb_pipeout(td->urb->pipe) ? TD_DIR_OUT : TD_DIR_IN; + setup_etd_dword0(imx21, etd_num, td->urb, dir, etd->dmem_size); + etd_writel(imx21, etd_num, 1, etd->dmem_offset); + etd_writel(imx21, etd_num, 2, + (TD_NOTACCESSED << DW2_COMPCODE) | + ((td->frame & 0xFFFF) << DW2_STARTFRM)); + etd_writel(imx21, etd_num, 3, + (TD_NOTACCESSED << DW3_COMPCODE0) | + (td->len << DW3_PKTLEN0)); + + activate_etd(imx21, etd_num, td->data, dir); + } +} + +static void isoc_etd_done(struct usb_hcd *hcd, struct urb *urb, int etd_num) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + int etd_mask = 1 << etd_num; + struct urb_priv *urb_priv = urb->hcpriv; + struct etd_priv *etd = imx21->etd + etd_num; + struct td *td = etd->td; + struct usb_host_endpoint *ep = etd->ep; + int isoc_index = td->isoc_index; + unsigned int pipe = urb->pipe; + int dir_in = usb_pipein(pipe); + int cc; + int bytes_xfrd; + + disactivate_etd(imx21, etd_num); + + cc = (etd_readl(imx21, etd_num, 3) >> DW3_COMPCODE0) & 0xf; + bytes_xfrd = etd_readl(imx21, etd_num, 3) & 0x3ff; + + /* Input doesn't always fill the buffer, don't generate an error + * when this happens. + */ + if (dir_in && (cc == TD_DATAUNDERRUN)) + cc = TD_CC_NOERROR; + + if (cc == TD_NOTACCESSED) + bytes_xfrd = 0; + + debug_isoc_completed(imx21, + imx21_hc_get_frame(hcd), td, cc, bytes_xfrd); + if (cc) { + urb_priv->isoc_status = -EXDEV; + dev_dbg(imx21->dev, + "bad iso cc=0x%X frame=%d sched frame=%d " + "cnt=%d len=%d urb=%p etd=%d index=%d\n", + cc, imx21_hc_get_frame(hcd), td->frame, + bytes_xfrd, td->len, urb, etd_num, isoc_index); + } + + if (dir_in) + clear_toggle_bit(imx21, USBH_XFILLSTAT, etd_mask); + + urb->actual_length += bytes_xfrd; + urb->iso_frame_desc[isoc_index].actual_length = bytes_xfrd; + urb->iso_frame_desc[isoc_index].status = cc_to_error[cc]; + + etd->td = NULL; + etd->urb = NULL; + etd->ep = NULL; + + if (--urb_priv->isoc_remaining == 0) + urb_done(hcd, urb, urb_priv->isoc_status); + + schedule_isoc_etds(hcd, ep); +} + +static struct ep_priv *alloc_isoc_ep( + struct imx21 *imx21, struct usb_host_endpoint *ep) +{ + struct ep_priv *ep_priv; + int i; + + ep_priv = kzalloc(sizeof(struct ep_priv), GFP_ATOMIC); + if (ep_priv == NULL) + return NULL; + + /* Allocate the ETDs */ + for (i = 0; i < NUM_ISO_ETDS; i++) { + ep_priv->etd[i] = alloc_etd(imx21); + if (ep_priv->etd[i] < 0) { + int j; + dev_err(imx21->dev, "isoc: Couldn't allocate etd\n"); + for (j = 0; j < i; j++) + free_etd(imx21, ep_priv->etd[j]); + goto alloc_etd_failed; + } + imx21->etd[ep_priv->etd[i]].ep = ep; + } + + INIT_LIST_HEAD(&ep_priv->td_list); + ep_priv->ep = ep; + ep->hcpriv = ep_priv; + return ep_priv; + +alloc_etd_failed: + kfree(ep_priv); + return NULL; +} + +static int imx21_hc_urb_enqueue_isoc(struct usb_hcd *hcd, + struct usb_host_endpoint *ep, + struct urb *urb, gfp_t mem_flags) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + struct urb_priv *urb_priv; + unsigned long flags; + struct ep_priv *ep_priv; + struct td *td = NULL; + int i; + int ret; + int cur_frame; + u16 maxpacket; + + urb_priv = kzalloc(sizeof(struct urb_priv), mem_flags); + if (urb_priv == NULL) + return -ENOMEM; + + urb_priv->isoc_td = kzalloc( + sizeof(struct td) * urb->number_of_packets, mem_flags); + if (urb_priv->isoc_td == NULL) { + ret = -ENOMEM; + goto alloc_td_failed; + } + + spin_lock_irqsave(&imx21->lock, flags); + + if (ep->hcpriv == NULL) { + ep_priv = alloc_isoc_ep(imx21, ep); + if (ep_priv == NULL) { + ret = -ENOMEM; + goto alloc_ep_failed; + } + } else { + ep_priv = ep->hcpriv; + } + + ret = usb_hcd_link_urb_to_ep(hcd, urb); + if (ret) + goto link_failed; + + urb->status = -EINPROGRESS; + urb->actual_length = 0; + urb->error_count = 0; + urb->hcpriv = urb_priv; + urb_priv->ep = ep; + + /* allocate data memory for largest packets if not already done */ + maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); + for (i = 0; i < NUM_ISO_ETDS; i++) { + struct etd_priv *etd = &imx21->etd[ep_priv->etd[i]]; + + if (etd->dmem_size > 0 && etd->dmem_size < maxpacket) { + /* not sure if this can really occur.... */ + dev_err(imx21->dev, "increasing isoc buffer %d->%d\n", + etd->dmem_size, maxpacket); + ret = -EMSGSIZE; + goto alloc_dmem_failed; + } + + if (etd->dmem_size == 0) { + etd->dmem_offset = alloc_dmem(imx21, maxpacket, ep); + if (etd->dmem_offset < 0) { + dev_dbg(imx21->dev, "failed alloc isoc dmem\n"); + ret = -EAGAIN; + goto alloc_dmem_failed; + } + etd->dmem_size = maxpacket; + } + } + + /* calculate frame */ + cur_frame = imx21_hc_get_frame(hcd); + if (urb->transfer_flags & URB_ISO_ASAP) { + if (list_empty(&ep_priv->td_list)) + urb->start_frame = cur_frame + 5; + else + urb->start_frame = list_entry( + ep_priv->td_list.prev, + struct td, list)->frame + urb->interval; + } + urb->start_frame = wrap_frame(urb->start_frame); + if (frame_after(cur_frame, urb->start_frame)) { + dev_dbg(imx21->dev, + "enqueue: adjusting iso start %d (cur=%d) asap=%d\n", + urb->start_frame, cur_frame, + (urb->transfer_flags & URB_ISO_ASAP) != 0); + urb->start_frame = wrap_frame(cur_frame + 1); + } + + /* set up transfers */ + td = urb_priv->isoc_td; + for (i = 0; i < urb->number_of_packets; i++, td++) { + td->ep = ep; + td->urb = urb; + td->len = urb->iso_frame_desc[i].length; + td->isoc_index = i; + td->frame = wrap_frame(urb->start_frame + urb->interval * i); + td->data = urb->transfer_dma + urb->iso_frame_desc[i].offset; + list_add_tail(&td->list, &ep_priv->td_list); + } + + urb_priv->isoc_remaining = urb->number_of_packets; + dev_vdbg(imx21->dev, "setup %d packets for iso frame %d->%d\n", + urb->number_of_packets, urb->start_frame, td->frame); + + debug_urb_submitted(imx21, urb); + schedule_isoc_etds(hcd, ep); + + spin_unlock_irqrestore(&imx21->lock, flags); + return 0; + +alloc_dmem_failed: + usb_hcd_unlink_urb_from_ep(hcd, urb); + +link_failed: +alloc_ep_failed: + spin_unlock_irqrestore(&imx21->lock, flags); + kfree(urb_priv->isoc_td); + +alloc_td_failed: + kfree(urb_priv); + return ret; +} + +static void dequeue_isoc_urb(struct imx21 *imx21, + struct urb *urb, struct ep_priv *ep_priv) +{ + struct urb_priv *urb_priv = urb->hcpriv; + struct td *td, *tmp; + int i; + + if (urb_priv->active) { + for (i = 0; i < NUM_ISO_ETDS; i++) { + int etd_num = ep_priv->etd[i]; + if (etd_num != -1 && imx21->etd[etd_num].urb == urb) { + struct etd_priv *etd = imx21->etd + etd_num; + + reset_etd(imx21, etd_num); + if (etd->dmem_size) + free_dmem(imx21, etd->dmem_offset); + etd->dmem_size = 0; + } + } + } + + list_for_each_entry_safe(td, tmp, &ep_priv->td_list, list) { + if (td->urb == urb) { + dev_vdbg(imx21->dev, "removing td %p\n", td); + list_del(&td->list); + } + } +} + +/* =========================================== */ +/* NON ISOC Handling ... */ +/* =========================================== */ + +static void schedule_nonisoc_etd(struct imx21 *imx21, struct urb *urb) +{ + unsigned int pipe = urb->pipe; + struct urb_priv *urb_priv = urb->hcpriv; + struct ep_priv *ep_priv = urb_priv->ep->hcpriv; + int state = urb_priv->state; + int etd_num = ep_priv->etd[0]; + struct etd_priv *etd; + int dmem_offset; + u32 count; + u16 etd_buf_size; + u16 maxpacket; + u8 dir; + u8 bufround; + u8 datatoggle; + u8 interval = 0; + u8 relpolpos = 0; + + if (etd_num < 0) { + dev_err(imx21->dev, "No valid ETD\n"); + return; + } + if (readl(imx21->regs + USBH_ETDENSET) & (1 << etd_num)) + dev_err(imx21->dev, "submitting to active ETD %d\n", etd_num); + + etd = &imx21->etd[etd_num]; + maxpacket = usb_maxpacket(urb->dev, pipe, usb_pipeout(pipe)); + if (!maxpacket) + maxpacket = 8; + + if (usb_pipecontrol(pipe) && (state != US_CTRL_DATA)) { + if (state == US_CTRL_SETUP) { + dir = TD_DIR_SETUP; + etd->dma_handle = urb->setup_dma; + bufround = 0; + count = 8; + datatoggle = TD_TOGGLE_DATA0; + } else { /* US_CTRL_ACK */ + dir = usb_pipeout(pipe) ? TD_DIR_IN : TD_DIR_OUT; + etd->dma_handle = urb->transfer_dma; + bufround = 0; + count = 0; + datatoggle = TD_TOGGLE_DATA1; + } + } else { + dir = usb_pipeout(pipe) ? TD_DIR_OUT : TD_DIR_IN; + bufround = (dir == TD_DIR_IN) ? 1 : 0; + etd->dma_handle = urb->transfer_dma; + if (usb_pipebulk(pipe) && (state == US_BULK0)) + count = 0; + else + count = urb->transfer_buffer_length; + + if (usb_pipecontrol(pipe)) { + datatoggle = TD_TOGGLE_DATA1; + } else { + if (usb_gettoggle( + urb->dev, + usb_pipeendpoint(urb->pipe), + usb_pipeout(urb->pipe))) + datatoggle = TD_TOGGLE_DATA1; + else + datatoggle = TD_TOGGLE_DATA0; + } + } + + etd->urb = urb; + etd->ep = urb_priv->ep; + etd->len = count; + + if (usb_pipeint(pipe)) { + interval = urb->interval; + relpolpos = (readl(imx21->regs + USBH_FRMNUB) + 1) & 0xff; + } + + /* Write ETD to device memory */ + setup_etd_dword0(imx21, etd_num, urb, dir, maxpacket); + + etd_writel(imx21, etd_num, 2, + (u32) interval << DW2_POLINTERV | + ((u32) relpolpos << DW2_RELPOLPOS) | + ((u32) dir << DW2_DIRPID) | + ((u32) bufround << DW2_BUFROUND) | + ((u32) datatoggle << DW2_DATATOG) | + ((u32) TD_NOTACCESSED << DW2_COMPCODE)); + + /* DMA will always transfer buffer size even if TOBYCNT in DWORD3 + is smaller. Make sure we don't overrun the buffer! + */ + if (count && count < maxpacket) + etd_buf_size = count; + else + etd_buf_size = maxpacket; + + etd_writel(imx21, etd_num, 3, + ((u32) (etd_buf_size - 1) << DW3_BUFSIZE) | (u32) count); + + if (!count) + etd->dma_handle = 0; + + /* allocate x and y buffer space at once */ + etd->dmem_size = (count > maxpacket) ? maxpacket * 2 : maxpacket; + dmem_offset = alloc_dmem(imx21, etd->dmem_size, urb_priv->ep); + if (dmem_offset < 0) { + /* Setup everything we can in HW and update when we get DMEM */ + etd_writel(imx21, etd_num, 1, (u32)maxpacket << 16); + + dev_dbg(imx21->dev, "Queuing etd %d for DMEM\n", etd_num); + debug_urb_queued_for_dmem(imx21, urb); + list_add_tail(&etd->queue, &imx21->queue_for_dmem); + return; + } + + etd_writel(imx21, etd_num, 1, + (((u32) dmem_offset + (u32) maxpacket) << DW1_YBUFSRTAD) | + (u32) dmem_offset); + + urb_priv->active = 1; + + /* enable the ETD to kick off transfer */ + dev_vdbg(imx21->dev, "Activating etd %d for %d bytes %s\n", + etd_num, count, dir != TD_DIR_IN ? "out" : "in"); + activate_etd(imx21, etd_num, etd->dma_handle, dir); + +} + +static void nonisoc_etd_done(struct usb_hcd *hcd, struct urb *urb, int etd_num) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + struct etd_priv *etd = &imx21->etd[etd_num]; + u32 etd_mask = 1 << etd_num; + struct urb_priv *urb_priv = urb->hcpriv; + int dir; + u16 xbufaddr; + int cc; + u32 bytes_xfrd; + int etd_done; + + disactivate_etd(imx21, etd_num); + + dir = (etd_readl(imx21, etd_num, 0) >> DW0_DIRECT) & 0x3; + xbufaddr = etd_readl(imx21, etd_num, 1) & 0xffff; + cc = (etd_readl(imx21, etd_num, 2) >> DW2_COMPCODE) & 0xf; + bytes_xfrd = etd->len - (etd_readl(imx21, etd_num, 3) & 0x1fffff); + + /* save toggle carry */ + usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), + usb_pipeout(urb->pipe), + (etd_readl(imx21, etd_num, 0) >> DW0_TOGCRY) & 0x1); + + if (dir == TD_DIR_IN) { + clear_toggle_bit(imx21, USBH_XFILLSTAT, etd_mask); + clear_toggle_bit(imx21, USBH_YFILLSTAT, etd_mask); + } + free_dmem(imx21, xbufaddr); + + urb->error_count = 0; + if (!(urb->transfer_flags & URB_SHORT_NOT_OK) + && (cc == TD_DATAUNDERRUN)) + cc = TD_CC_NOERROR; + + if (cc != 0) + dev_vdbg(imx21->dev, "cc is 0x%x\n", cc); + + etd_done = (cc_to_error[cc] != 0); /* stop if error */ + + switch (usb_pipetype(urb->pipe)) { + case PIPE_CONTROL: + switch (urb_priv->state) { + case US_CTRL_SETUP: + if (urb->transfer_buffer_length > 0) + urb_priv->state = US_CTRL_DATA; + else + urb_priv->state = US_CTRL_ACK; + break; + case US_CTRL_DATA: + urb->actual_length += bytes_xfrd; + urb_priv->state = US_CTRL_ACK; + break; + case US_CTRL_ACK: + etd_done = 1; + break; + default: + dev_err(imx21->dev, + "Invalid pipe state %d\n", urb_priv->state); + etd_done = 1; + break; + } + break; + + case PIPE_BULK: + urb->actual_length += bytes_xfrd; + if ((urb_priv->state == US_BULK) + && (urb->transfer_flags & URB_ZERO_PACKET) + && urb->transfer_buffer_length > 0 + && ((urb->transfer_buffer_length % + usb_maxpacket(urb->dev, urb->pipe, + usb_pipeout(urb->pipe))) == 0)) { + /* need a 0-packet */ + urb_priv->state = US_BULK0; + } else { + etd_done = 1; + } + break; + + case PIPE_INTERRUPT: + urb->actual_length += bytes_xfrd; + etd_done = 1; + break; + } + + if (!etd_done) { + dev_vdbg(imx21->dev, "next state=%d\n", urb_priv->state); + schedule_nonisoc_etd(imx21, urb); + } else { + struct usb_host_endpoint *ep = urb->ep; + + urb_done(hcd, urb, cc_to_error[cc]); + etd->urb = NULL; + + if (!list_empty(&ep->urb_list)) { + urb = list_first_entry(&ep->urb_list, + struct urb, urb_list); + dev_vdbg(imx21->dev, "next URB %p\n", urb); + schedule_nonisoc_etd(imx21, urb); + } + } +} + +static struct ep_priv *alloc_ep(void) +{ + int i; + struct ep_priv *ep_priv; + + ep_priv = kzalloc(sizeof(struct ep_priv), GFP_ATOMIC); + if (!ep_priv) + return NULL; + + for (i = 0; i < NUM_ISO_ETDS; ++i) + ep_priv->etd[i] = -1; + + return ep_priv; +} + +static int imx21_hc_urb_enqueue(struct usb_hcd *hcd, + struct urb *urb, gfp_t mem_flags) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + struct usb_host_endpoint *ep = urb->ep; + struct urb_priv *urb_priv; + struct ep_priv *ep_priv; + struct etd_priv *etd; + int ret; + unsigned long flags; + int new_ep = 0; + + dev_vdbg(imx21->dev, + "enqueue urb=%p ep=%p len=%d " + "buffer=%p dma=%08X setupBuf=%p setupDma=%08X\n", + urb, ep, + urb->transfer_buffer_length, + urb->transfer_buffer, urb->transfer_dma, + urb->setup_packet, urb->setup_dma); + + if (usb_pipeisoc(urb->pipe)) + return imx21_hc_urb_enqueue_isoc(hcd, ep, urb, mem_flags); + + urb_priv = kzalloc(sizeof(struct urb_priv), mem_flags); + if (!urb_priv) + return -ENOMEM; + + spin_lock_irqsave(&imx21->lock, flags); + + ep_priv = ep->hcpriv; + if (ep_priv == NULL) { + ep_priv = alloc_ep(); + if (!ep_priv) { + ret = -ENOMEM; + goto failed_alloc_ep; + } + ep->hcpriv = ep_priv; + ep_priv->ep = ep; + new_ep = 1; + } + + ret = usb_hcd_link_urb_to_ep(hcd, urb); + if (ret) + goto failed_link; + + urb->status = -EINPROGRESS; + urb->actual_length = 0; + urb->error_count = 0; + urb->hcpriv = urb_priv; + urb_priv->ep = ep; + + switch (usb_pipetype(urb->pipe)) { + case PIPE_CONTROL: + urb_priv->state = US_CTRL_SETUP; + break; + case PIPE_BULK: + urb_priv->state = US_BULK; + break; + } + + debug_urb_submitted(imx21, urb); + if (ep_priv->etd[0] < 0) { + if (ep_priv->waiting_etd) { + dev_dbg(imx21->dev, + "no ETD available already queued %p\n", + ep_priv); + debug_urb_queued_for_etd(imx21, urb); + goto out; + } + ep_priv->etd[0] = alloc_etd(imx21); + if (ep_priv->etd[0] < 0) { + dev_dbg(imx21->dev, + "no ETD available queueing %p\n", ep_priv); + debug_urb_queued_for_etd(imx21, urb); + list_add_tail(&ep_priv->queue, &imx21->queue_for_etd); + ep_priv->waiting_etd = 1; + goto out; + } + } + + /* Schedule if no URB already active for this endpoint */ + etd = &imx21->etd[ep_priv->etd[0]]; + if (etd->urb == NULL) { + DEBUG_LOG_FRAME(imx21, etd, last_req); + schedule_nonisoc_etd(imx21, urb); + } + +out: + spin_unlock_irqrestore(&imx21->lock, flags); + return 0; + +failed_link: +failed_alloc_ep: + spin_unlock_irqrestore(&imx21->lock, flags); + kfree(urb_priv); + return ret; +} + +static int imx21_hc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, + int status) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + unsigned long flags; + struct usb_host_endpoint *ep; + struct ep_priv *ep_priv; + struct urb_priv *urb_priv = urb->hcpriv; + int ret = -EINVAL; + + dev_vdbg(imx21->dev, "dequeue urb=%p iso=%d status=%d\n", + urb, usb_pipeisoc(urb->pipe), status); + + spin_lock_irqsave(&imx21->lock, flags); + + ret = usb_hcd_check_unlink_urb(hcd, urb, status); + if (ret) + goto fail; + ep = urb_priv->ep; + ep_priv = ep->hcpriv; + + debug_urb_unlinked(imx21, urb); + + if (usb_pipeisoc(urb->pipe)) { + dequeue_isoc_urb(imx21, urb, ep_priv); + schedule_isoc_etds(hcd, ep); + } else if (urb_priv->active) { + int etd_num = ep_priv->etd[0]; + if (etd_num != -1) { + disactivate_etd(imx21, etd_num); + free_dmem(imx21, etd_readl(imx21, etd_num, 1) & 0xffff); + imx21->etd[etd_num].urb = NULL; + } + } + + urb_done(hcd, urb, status); + + spin_unlock_irqrestore(&imx21->lock, flags); + return 0; + +fail: + spin_unlock_irqrestore(&imx21->lock, flags); + return ret; +} + +/* =========================================== */ +/* Interrupt dispatch */ +/* =========================================== */ + +static void process_etds(struct usb_hcd *hcd, struct imx21 *imx21, int sof) +{ + int etd_num; + int enable_sof_int = 0; + unsigned long flags; + + spin_lock_irqsave(&imx21->lock, flags); + + for (etd_num = 0; etd_num < USB_NUM_ETD; etd_num++) { + u32 etd_mask = 1 << etd_num; + u32 enabled = readl(imx21->regs + USBH_ETDENSET) & etd_mask; + u32 done = readl(imx21->regs + USBH_ETDDONESTAT) & etd_mask; + struct etd_priv *etd = &imx21->etd[etd_num]; + + + if (done) { + DEBUG_LOG_FRAME(imx21, etd, last_int); + } else { +/* + * Kludge warning! + * + * When multiple transfers are using the bus we sometimes get into a state + * where the transfer has completed (the CC field of the ETD is != 0x0F), + * the ETD has self disabled but the ETDDONESTAT flag is not set + * (and hence no interrupt occurs). + * This causes the transfer in question to hang. + * The kludge below checks for this condition at each SOF and processes any + * blocked ETDs (after an arbitary 10 frame wait) + * + * With a single active transfer the usbtest test suite will run for days + * without the kludge. + * With other bus activity (eg mass storage) even just test1 will hang without + * the kludge. + */ + u32 dword0; + int cc; + + if (etd->active_count && !enabled) /* suspicious... */ + enable_sof_int = 1; + + if (!sof || enabled || !etd->active_count) + continue; + + cc = etd_readl(imx21, etd_num, 2) >> DW2_COMPCODE; + if (cc == TD_NOTACCESSED) + continue; + + if (++etd->active_count < 10) + continue; + + dword0 = etd_readl(imx21, etd_num, 0); + dev_dbg(imx21->dev, + "unblock ETD %d dev=0x%X ep=0x%X cc=0x%02X!\n", + etd_num, dword0 & 0x7F, + (dword0 >> DW0_ENDPNT) & 0x0F, + cc); + +#ifdef DEBUG + dev_dbg(imx21->dev, + "frame: act=%d disact=%d" + " int=%d req=%d cur=%d\n", + etd->activated_frame, + etd->disactivated_frame, + etd->last_int_frame, + etd->last_req_frame, + readl(imx21->regs + USBH_FRMNUB)); + imx21->debug_unblocks++; +#endif + etd->active_count = 0; +/* End of kludge */ + } + + if (etd->ep == NULL || etd->urb == NULL) { + dev_dbg(imx21->dev, + "Interrupt for unexpected etd %d" + " ep=%p urb=%p\n", + etd_num, etd->ep, etd->urb); + disactivate_etd(imx21, etd_num); + continue; + } + + if (usb_pipeisoc(etd->urb->pipe)) + isoc_etd_done(hcd, etd->urb, etd_num); + else + nonisoc_etd_done(hcd, etd->urb, etd_num); + } + + /* only enable SOF interrupt if it may be needed for the kludge */ + if (enable_sof_int) + set_register_bits(imx21, USBH_SYSIEN, USBH_SYSIEN_SOFINT); + else + clear_register_bits(imx21, USBH_SYSIEN, USBH_SYSIEN_SOFINT); + + + spin_unlock_irqrestore(&imx21->lock, flags); +} + +static irqreturn_t imx21_irq(struct usb_hcd *hcd) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + u32 ints = readl(imx21->regs + USBH_SYSISR); + + if (ints & USBH_SYSIEN_HERRINT) + dev_dbg(imx21->dev, "Scheduling error\n"); + + if (ints & USBH_SYSIEN_SORINT) + dev_dbg(imx21->dev, "Scheduling overrun\n"); + + if (ints & (USBH_SYSISR_DONEINT | USBH_SYSISR_SOFINT)) + process_etds(hcd, imx21, ints & USBH_SYSISR_SOFINT); + + writel(ints, imx21->regs + USBH_SYSISR); + return IRQ_HANDLED; +} + +static void imx21_hc_endpoint_disable(struct usb_hcd *hcd, + struct usb_host_endpoint *ep) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + unsigned long flags; + struct ep_priv *ep_priv; + int i; + + if (ep == NULL) + return; + + spin_lock_irqsave(&imx21->lock, flags); + ep_priv = ep->hcpriv; + dev_vdbg(imx21->dev, "disable ep=%p, ep->hcpriv=%p\n", ep, ep_priv); + + if (!list_empty(&ep->urb_list)) + dev_dbg(imx21->dev, "ep's URB list is not empty\n"); + + if (ep_priv != NULL) { + for (i = 0; i < NUM_ISO_ETDS; i++) { + if (ep_priv->etd[i] > -1) + dev_dbg(imx21->dev, "free etd %d for disable\n", + ep_priv->etd[i]); + + free_etd(imx21, ep_priv->etd[i]); + } + kfree(ep_priv); + ep->hcpriv = NULL; + } + + for (i = 0; i < USB_NUM_ETD; i++) { + if (imx21->etd[i].alloc && imx21->etd[i].ep == ep) { + dev_err(imx21->dev, + "Active etd %d for disabled ep=%p!\n", i, ep); + free_etd(imx21, i); + } + } + free_epdmem(imx21, ep); + spin_unlock_irqrestore(&imx21->lock, flags); +} + +/* =========================================== */ +/* Hub handling */ +/* =========================================== */ + +static int get_hub_descriptor(struct usb_hcd *hcd, + struct usb_hub_descriptor *desc) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + desc->bDescriptorType = 0x29; /* HUB descriptor */ + desc->bHubContrCurrent = 0; + + desc->bNbrPorts = readl(imx21->regs + USBH_ROOTHUBA) + & USBH_ROOTHUBA_NDNSTMPRT_MASK; + desc->bDescLength = 9; + desc->bPwrOn2PwrGood = 0; + desc->wHubCharacteristics = (__force __u16) cpu_to_le16( + 0x0002 | /* No power switching */ + 0x0010 | /* No over current protection */ + 0); + + desc->bitmap[0] = 1 << 1; + desc->bitmap[1] = ~0; + return 0; +} + +static int imx21_hc_hub_status_data(struct usb_hcd *hcd, char *buf) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + int ports; + int changed = 0; + int i; + unsigned long flags; + + spin_lock_irqsave(&imx21->lock, flags); + ports = readl(imx21->regs + USBH_ROOTHUBA) + & USBH_ROOTHUBA_NDNSTMPRT_MASK; + if (ports > 7) { + ports = 7; + dev_err(imx21->dev, "ports %d > 7\n", ports); + } + for (i = 0; i < ports; i++) { + if (readl(imx21->regs + USBH_PORTSTAT(i)) & + (USBH_PORTSTAT_CONNECTSC | + USBH_PORTSTAT_PRTENBLSC | + USBH_PORTSTAT_PRTSTATSC | + USBH_PORTSTAT_OVRCURIC | + USBH_PORTSTAT_PRTRSTSC)) { + + changed = 1; + buf[0] |= 1 << (i + 1); + } + } + spin_unlock_irqrestore(&imx21->lock, flags); + + if (changed) + dev_info(imx21->dev, "Hub status changed\n"); + return changed; +} + +static int imx21_hc_hub_control(struct usb_hcd *hcd, + u16 typeReq, + u16 wValue, u16 wIndex, char *buf, u16 wLength) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + int rc = 0; + u32 status_write = 0; + + switch (typeReq) { + case ClearHubFeature: + dev_dbg(imx21->dev, "ClearHubFeature\n"); + switch (wValue) { + case C_HUB_OVER_CURRENT: + dev_dbg(imx21->dev, " OVER_CURRENT\n"); + break; + case C_HUB_LOCAL_POWER: + dev_dbg(imx21->dev, " LOCAL_POWER\n"); + break; + default: + dev_dbg(imx21->dev, " unknown\n"); + rc = -EINVAL; + break; + } + break; + + case ClearPortFeature: + dev_dbg(imx21->dev, "ClearPortFeature\n"); + switch (wValue) { + case USB_PORT_FEAT_ENABLE: + dev_dbg(imx21->dev, " ENABLE\n"); + status_write = USBH_PORTSTAT_CURCONST; + break; + case USB_PORT_FEAT_SUSPEND: + dev_dbg(imx21->dev, " SUSPEND\n"); + status_write = USBH_PORTSTAT_PRTOVRCURI; + break; + case USB_PORT_FEAT_POWER: + dev_dbg(imx21->dev, " POWER\n"); + status_write = USBH_PORTSTAT_LSDEVCON; + break; + case USB_PORT_FEAT_C_ENABLE: + dev_dbg(imx21->dev, " C_ENABLE\n"); + status_write = USBH_PORTSTAT_PRTENBLSC; + break; + case USB_PORT_FEAT_C_SUSPEND: + dev_dbg(imx21->dev, " C_SUSPEND\n"); + status_write = USBH_PORTSTAT_PRTSTATSC; + break; + case USB_PORT_FEAT_C_CONNECTION: + dev_dbg(imx21->dev, " C_CONNECTION\n"); + status_write = USBH_PORTSTAT_CONNECTSC; + break; + case USB_PORT_FEAT_C_OVER_CURRENT: + dev_dbg(imx21->dev, " C_OVER_CURRENT\n"); + status_write = USBH_PORTSTAT_OVRCURIC; + break; + case USB_PORT_FEAT_C_RESET: + dev_dbg(imx21->dev, " C_RESET\n"); + status_write = USBH_PORTSTAT_PRTRSTSC; + break; + default: + dev_dbg(imx21->dev, " unknown\n"); + rc = -EINVAL; + break; + } + + break; + + case GetHubDescriptor: + dev_dbg(imx21->dev, "GetHubDescriptor\n"); + rc = get_hub_descriptor(hcd, (void *)buf); + break; + + case GetHubStatus: + dev_dbg(imx21->dev, " GetHubStatus\n"); + *(__le32 *) buf = 0; + break; + + case GetPortStatus: + dev_dbg(imx21->dev, "GetPortStatus: port: %d, 0x%x\n", + wIndex, USBH_PORTSTAT(wIndex - 1)); + *(__le32 *) buf = readl(imx21->regs + + USBH_PORTSTAT(wIndex - 1)); + break; + + case SetHubFeature: + dev_dbg(imx21->dev, "SetHubFeature\n"); + switch (wValue) { + case C_HUB_OVER_CURRENT: + dev_dbg(imx21->dev, " OVER_CURRENT\n"); + break; + + case C_HUB_LOCAL_POWER: + dev_dbg(imx21->dev, " LOCAL_POWER\n"); + break; + default: + dev_dbg(imx21->dev, " unknown\n"); + rc = -EINVAL; + break; + } + + break; + + case SetPortFeature: + dev_dbg(imx21->dev, "SetPortFeature\n"); + switch (wValue) { + case USB_PORT_FEAT_SUSPEND: + dev_dbg(imx21->dev, " SUSPEND\n"); + status_write = USBH_PORTSTAT_PRTSUSPST; + break; + case USB_PORT_FEAT_POWER: + dev_dbg(imx21->dev, " POWER\n"); + status_write = USBH_PORTSTAT_PRTPWRST; + break; + case USB_PORT_FEAT_RESET: + dev_dbg(imx21->dev, " RESET\n"); + status_write = USBH_PORTSTAT_PRTRSTST; + break; + default: + dev_dbg(imx21->dev, " unknown\n"); + rc = -EINVAL; + break; + } + break; + + default: + dev_dbg(imx21->dev, " unknown\n"); + rc = -EINVAL; + break; + } + + if (status_write) + writel(status_write, imx21->regs + USBH_PORTSTAT(wIndex - 1)); + return rc; +} + +/* =========================================== */ +/* Host controller management */ +/* =========================================== */ + +static int imx21_hc_reset(struct usb_hcd *hcd) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + unsigned long timeout; + unsigned long flags; + + spin_lock_irqsave(&imx21->lock, flags); + + /* Reset the Host controler modules */ + writel(USBOTG_RST_RSTCTRL | USBOTG_RST_RSTRH | + USBOTG_RST_RSTHSIE | USBOTG_RST_RSTHC, + imx21->regs + USBOTG_RST_CTRL); + + /* Wait for reset to finish */ + timeout = jiffies + HZ; + while (readl(imx21->regs + USBOTG_RST_CTRL) != 0) { + if (time_after(jiffies, timeout)) { + spin_unlock_irqrestore(&imx21->lock, flags); + dev_err(imx21->dev, "timeout waiting for reset\n"); + return -ETIMEDOUT; + } + spin_unlock_irq(&imx21->lock); + schedule_timeout(1); + spin_lock_irq(&imx21->lock); + } + spin_unlock_irqrestore(&imx21->lock, flags); + return 0; +} + +static int __devinit imx21_hc_start(struct usb_hcd *hcd) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + unsigned long flags; + int i, j; + u32 hw_mode = USBOTG_HWMODE_CRECFG_HOST; + u32 usb_control = 0; + + hw_mode |= ((imx21->pdata->host_xcvr << USBOTG_HWMODE_HOSTXCVR_SHIFT) & + USBOTG_HWMODE_HOSTXCVR_MASK); + hw_mode |= ((imx21->pdata->otg_xcvr << USBOTG_HWMODE_OTGXCVR_SHIFT) & + USBOTG_HWMODE_OTGXCVR_MASK); + + if (imx21->pdata->host1_txenoe) + usb_control |= USBCTRL_HOST1_TXEN_OE; + + if (!imx21->pdata->host1_xcverless) + usb_control |= USBCTRL_HOST1_BYP_TLL; + + if (imx21->pdata->otg_ext_xcvr) + usb_control |= USBCTRL_OTC_RCV_RXDP; + + + spin_lock_irqsave(&imx21->lock, flags); + + writel((USBOTG_CLK_CTRL_HST | USBOTG_CLK_CTRL_MAIN), + imx21->regs + USBOTG_CLK_CTRL); + writel(hw_mode, imx21->regs + USBOTG_HWMODE); + writel(usb_control, imx21->regs + USBCTRL); + writel(USB_MISCCONTROL_SKPRTRY | USB_MISCCONTROL_ARBMODE, + imx21->regs + USB_MISCCONTROL); + + /* Clear the ETDs */ + for (i = 0; i < USB_NUM_ETD; i++) + for (j = 0; j < 4; j++) + etd_writel(imx21, i, j, 0); + + /* Take the HC out of reset */ + writel(USBH_HOST_CTRL_HCUSBSTE_OPERATIONAL | USBH_HOST_CTRL_CTLBLKSR_1, + imx21->regs + USBH_HOST_CTRL); + + /* Enable ports */ + if (imx21->pdata->enable_otg_host) + writel(USBH_PORTSTAT_PRTPWRST | USBH_PORTSTAT_PRTENABST, + imx21->regs + USBH_PORTSTAT(0)); + + if (imx21->pdata->enable_host1) + writel(USBH_PORTSTAT_PRTPWRST | USBH_PORTSTAT_PRTENABST, + imx21->regs + USBH_PORTSTAT(1)); + + if (imx21->pdata->enable_host2) + writel(USBH_PORTSTAT_PRTPWRST | USBH_PORTSTAT_PRTENABST, + imx21->regs + USBH_PORTSTAT(2)); + + + hcd->state = HC_STATE_RUNNING; + + /* Enable host controller interrupts */ + set_register_bits(imx21, USBH_SYSIEN, + USBH_SYSIEN_HERRINT | + USBH_SYSIEN_DONEINT | USBH_SYSIEN_SORINT); + set_register_bits(imx21, USBOTG_CINT_STEN, USBOTG_HCINT); + + spin_unlock_irqrestore(&imx21->lock, flags); + + return 0; +} + +static void imx21_hc_stop(struct usb_hcd *hcd) +{ + struct imx21 *imx21 = hcd_to_imx21(hcd); + unsigned long flags; + + spin_lock_irqsave(&imx21->lock, flags); + + writel(0, imx21->regs + USBH_SYSIEN); + clear_register_bits(imx21, USBOTG_CINT_STEN, USBOTG_HCINT); + clear_register_bits(imx21, USBOTG_CLK_CTRL_HST | USBOTG_CLK_CTRL_MAIN, + USBOTG_CLK_CTRL); + spin_unlock_irqrestore(&imx21->lock, flags); +} + +/* =========================================== */ +/* Driver glue */ +/* =========================================== */ + +static struct hc_driver imx21_hc_driver = { + .description = hcd_name, + .product_desc = "IMX21 USB Host Controller", + .hcd_priv_size = sizeof(struct imx21), + + .flags = HCD_USB11, + .irq = imx21_irq, + + .reset = imx21_hc_reset, + .start = imx21_hc_start, + .stop = imx21_hc_stop, + + /* I/O requests */ + .urb_enqueue = imx21_hc_urb_enqueue, + .urb_dequeue = imx21_hc_urb_dequeue, + .endpoint_disable = imx21_hc_endpoint_disable, + + /* scheduling support */ + .get_frame_number = imx21_hc_get_frame, + + /* Root hub support */ + .hub_status_data = imx21_hc_hub_status_data, + .hub_control = imx21_hc_hub_control, + +}; + +static struct mx21_usbh_platform_data default_pdata = { + .host_xcvr = MX21_USBXCVR_TXDIF_RXDIF, + .otg_xcvr = MX21_USBXCVR_TXDIF_RXDIF, + .enable_host1 = 1, + .enable_host2 = 1, + .enable_otg_host = 1, + +}; + +static int imx21_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct imx21 *imx21 = hcd_to_imx21(hcd); + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + remove_debug_files(imx21); + usb_remove_hcd(hcd); + + if (res != NULL) { + clk_disable(imx21->clk); + clk_put(imx21->clk); + iounmap(imx21->regs); + release_mem_region(res->start, resource_size(res)); + } + + kfree(hcd); + return 0; +} + + +static int imx21_probe(struct platform_device *pdev) +{ + struct usb_hcd *hcd; + struct imx21 *imx21; + struct resource *res; + int ret; + int irq; + + printk(KERN_INFO "%s\n", imx21_hc_driver.product_desc); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return -ENXIO; + + hcd = usb_create_hcd(&imx21_hc_driver, + &pdev->dev, dev_name(&pdev->dev)); + if (hcd == NULL) { + dev_err(&pdev->dev, "Cannot create hcd (%s)\n", + dev_name(&pdev->dev)); + return -ENOMEM; + } + + imx21 = hcd_to_imx21(hcd); + imx21->dev = &pdev->dev; + imx21->pdata = pdev->dev.platform_data; + if (!imx21->pdata) + imx21->pdata = &default_pdata; + + spin_lock_init(&imx21->lock); + INIT_LIST_HEAD(&imx21->dmem_list); + INIT_LIST_HEAD(&imx21->queue_for_etd); + INIT_LIST_HEAD(&imx21->queue_for_dmem); + create_debug_files(imx21); + + res = request_mem_region(res->start, resource_size(res), hcd_name); + if (!res) { + ret = -EBUSY; + goto failed_request_mem; + } + + imx21->regs = ioremap(res->start, resource_size(res)); + if (imx21->regs == NULL) { + dev_err(imx21->dev, "Cannot map registers\n"); + ret = -ENOMEM; + goto failed_ioremap; + } + + /* Enable clocks source */ + imx21->clk = clk_get(imx21->dev, NULL); + if (IS_ERR(imx21->clk)) { + dev_err(imx21->dev, "no clock found\n"); + ret = PTR_ERR(imx21->clk); + goto failed_clock_get; + } + + ret = clk_set_rate(imx21->clk, clk_round_rate(imx21->clk, 48000000)); + if (ret) + goto failed_clock_set; + ret = clk_enable(imx21->clk); + if (ret) + goto failed_clock_enable; + + dev_info(imx21->dev, "Hardware HC revision: 0x%02X\n", + (readl(imx21->regs + USBOTG_HWMODE) >> 16) & 0xFF); + + ret = usb_add_hcd(hcd, irq, IRQF_DISABLED); + if (ret != 0) { + dev_err(imx21->dev, "usb_add_hcd() returned %d\n", ret); + goto failed_add_hcd; + } + + return 0; + +failed_add_hcd: + clk_disable(imx21->clk); +failed_clock_enable: +failed_clock_set: + clk_put(imx21->clk); +failed_clock_get: + iounmap(imx21->regs); +failed_ioremap: + release_mem_region(res->start, res->end - res->start); +failed_request_mem: + remove_debug_files(imx21); + usb_put_hcd(hcd); + return ret; +} + +static struct platform_driver imx21_hcd_driver = { + .driver = { + .name = (char *)hcd_name, + }, + .probe = imx21_probe, + .remove = imx21_remove, + .suspend = NULL, + .resume = NULL, +}; + +static int __init imx21_hcd_init(void) +{ + return platform_driver_register(&imx21_hcd_driver); +} + +static void __exit imx21_hcd_cleanup(void) +{ + platform_driver_unregister(&imx21_hcd_driver); +} + +module_init(imx21_hcd_init); +module_exit(imx21_hcd_cleanup); + +MODULE_DESCRIPTION("i.MX21 USB Host controller"); +MODULE_AUTHOR("Martin Fuzzey"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:imx21-hcd"); diff --git a/drivers/usb/host/imx21-hcd.h b/drivers/usb/host/imx21-hcd.h new file mode 100644 index 0000000..1b0d913 --- /dev/null +++ b/drivers/usb/host/imx21-hcd.h @@ -0,0 +1,436 @@ +/* + * Macros and prototypes for i.MX21 + * + * Copyright (C) 2006 Loping Dog Embedded Systems + * Copyright (C) 2009 Martin Fuzzey + * Originally written by Jay Monkman + * Ported to 2.6.30, debugged and enhanced by Martin Fuzzey + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __LINUX_IMX21_HCD_H__ +#define __LINUX_IMX21_HCD_H__ + +#include + +#define NUM_ISO_ETDS 2 +#define USB_NUM_ETD 32 +#define DMEM_SIZE 4096 + +/* Register definitions */ +#define USBOTG_HWMODE 0x00 +#define USBOTG_HWMODE_ANASDBEN (1 << 14) +#define USBOTG_HWMODE_OTGXCVR_SHIFT 6 +#define USBOTG_HWMODE_OTGXCVR_MASK (3 << 6) +#define USBOTG_HWMODE_OTGXCVR_TD_RD (0 << 6) +#define USBOTG_HWMODE_OTGXCVR_TS_RD (2 << 6) +#define USBOTG_HWMODE_OTGXCVR_TD_RS (1 << 6) +#define USBOTG_HWMODE_OTGXCVR_TS_RS (3 << 6) +#define USBOTG_HWMODE_HOSTXCVR_SHIFT 4 +#define USBOTG_HWMODE_HOSTXCVR_MASK (3 << 4) +#define USBOTG_HWMODE_HOSTXCVR_TD_RD (0 << 4) +#define USBOTG_HWMODE_HOSTXCVR_TS_RD (2 << 4) +#define USBOTG_HWMODE_HOSTXCVR_TD_RS (1 << 4) +#define USBOTG_HWMODE_HOSTXCVR_TS_RS (3 << 4) +#define USBOTG_HWMODE_CRECFG_MASK (3 << 0) +#define USBOTG_HWMODE_CRECFG_HOST (1 << 0) +#define USBOTG_HWMODE_CRECFG_FUNC (2 << 0) +#define USBOTG_HWMODE_CRECFG_HNP (3 << 0) + +#define USBOTG_CINT_STAT 0x04 +#define USBOTG_CINT_STEN 0x08 +#define USBOTG_ASHNPINT (1 << 5) +#define USBOTG_ASFCINT (1 << 4) +#define USBOTG_ASHCINT (1 << 3) +#define USBOTG_SHNPINT (1 << 2) +#define USBOTG_FCINT (1 << 1) +#define USBOTG_HCINT (1 << 0) + +#define USBOTG_CLK_CTRL 0x0c +#define USBOTG_CLK_CTRL_FUNC (1 << 2) +#define USBOTG_CLK_CTRL_HST (1 << 1) +#define USBOTG_CLK_CTRL_MAIN (1 << 0) + +#define USBOTG_RST_CTRL 0x10 +#define USBOTG_RST_RSTI2C (1 << 15) +#define USBOTG_RST_RSTCTRL (1 << 5) +#define USBOTG_RST_RSTFC (1 << 4) +#define USBOTG_RST_RSTFSKE (1 << 3) +#define USBOTG_RST_RSTRH (1 << 2) +#define USBOTG_RST_RSTHSIE (1 << 1) +#define USBOTG_RST_RSTHC (1 << 0) + +#define USBOTG_FRM_INTVL 0x14 +#define USBOTG_FRM_REMAIN 0x18 +#define USBOTG_HNP_CSR 0x1c +#define USBOTG_HNP_ISR 0x2c +#define USBOTG_HNP_IEN 0x30 + +#define USBOTG_I2C_TXCVR_REG(x) (0x100 + (x)) +#define USBOTG_I2C_XCVR_DEVAD 0x118 +#define USBOTG_I2C_SEQ_OP_REG 0x119 +#define USBOTG_I2C_SEQ_RD_STARTAD 0x11a +#define USBOTG_I2C_OP_CTRL_REG 0x11b +#define USBOTG_I2C_SCLK_TO_SCK_HPER 0x11e +#define USBOTG_I2C_MASTER_INT_REG 0x11f + +#define USBH_HOST_CTRL 0x80 +#define USBH_HOST_CTRL_HCRESET (1 << 31) +#define USBH_HOST_CTRL_SCHDOVR(x) ((x) << 16) +#define USBH_HOST_CTRL_RMTWUEN (1 << 4) +#define USBH_HOST_CTRL_HCUSBSTE_RESET (0 << 2) +#define USBH_HOST_CTRL_HCUSBSTE_RESUME (1 << 2) +#define USBH_HOST_CTRL_HCUSBSTE_OPERATIONAL (2 << 2) +#define USBH_HOST_CTRL_HCUSBSTE_SUSPEND (3 << 2) +#define USBH_HOST_CTRL_CTLBLKSR_1 (0 << 0) +#define USBH_HOST_CTRL_CTLBLKSR_2 (1 << 0) +#define USBH_HOST_CTRL_CTLBLKSR_3 (2 << 0) +#define USBH_HOST_CTRL_CTLBLKSR_4 (3 << 0) + +#define USBH_SYSISR 0x88 +#define USBH_SYSISR_PSCINT (1 << 6) +#define USBH_SYSISR_FMOFINT (1 << 5) +#define USBH_SYSISR_HERRINT (1 << 4) +#define USBH_SYSISR_RESDETINT (1 << 3) +#define USBH_SYSISR_SOFINT (1 << 2) +#define USBH_SYSISR_DONEINT (1 << 1) +#define USBH_SYSISR_SORINT (1 << 0) + +#define USBH_SYSIEN 0x8c +#define USBH_SYSIEN_PSCINT (1 << 6) +#define USBH_SYSIEN_FMOFINT (1 << 5) +#define USBH_SYSIEN_HERRINT (1 << 4) +#define USBH_SYSIEN_RESDETINT (1 << 3) +#define USBH_SYSIEN_SOFINT (1 << 2) +#define USBH_SYSIEN_DONEINT (1 << 1) +#define USBH_SYSIEN_SORINT (1 << 0) + +#define USBH_XBUFSTAT 0x98 +#define USBH_YBUFSTAT 0x9c +#define USBH_XYINTEN 0xa0 +#define USBH_XFILLSTAT 0xa8 +#define USBH_YFILLSTAT 0xac +#define USBH_ETDENSET 0xc0 +#define USBH_ETDENCLR 0xc4 +#define USBH_IMMEDINT 0xcc +#define USBH_ETDDONESTAT 0xd0 +#define USBH_ETDDONEEN 0xd4 +#define USBH_FRMNUB 0xe0 +#define USBH_LSTHRESH 0xe4 + +#define USBH_ROOTHUBA 0xe8 +#define USBH_ROOTHUBA_PWRTOGOOD_MASK (0xff) +#define USBH_ROOTHUBA_PWRTOGOOD_SHIFT (24) +#define USBH_ROOTHUBA_NOOVRCURP (1 << 12) +#define USBH_ROOTHUBA_OVRCURPM (1 << 11) +#define USBH_ROOTHUBA_DEVTYPE (1 << 10) +#define USBH_ROOTHUBA_PWRSWTMD (1 << 9) +#define USBH_ROOTHUBA_NOPWRSWT (1 << 8) +#define USBH_ROOTHUBA_NDNSTMPRT_MASK (0xff) + +#define USBH_ROOTHUBB 0xec +#define USBH_ROOTHUBB_PRTPWRCM(x) (1 << ((x) + 16)) +#define USBH_ROOTHUBB_DEVREMOVE(x) (1 << (x)) + +#define USBH_ROOTSTAT 0xf0 +#define USBH_ROOTSTAT_CLRRMTWUE (1 << 31) +#define USBH_ROOTSTAT_OVRCURCHG (1 << 17) +#define USBH_ROOTSTAT_DEVCONWUE (1 << 15) +#define USBH_ROOTSTAT_OVRCURI (1 << 1) +#define USBH_ROOTSTAT_LOCPWRS (1 << 0) + +#define USBH_PORTSTAT(x) (0xf4 + ((x) * 4)) +#define USBH_PORTSTAT_PRTRSTSC (1 << 20) +#define USBH_PORTSTAT_OVRCURIC (1 << 19) +#define USBH_PORTSTAT_PRTSTATSC (1 << 18) +#define USBH_PORTSTAT_PRTENBLSC (1 << 17) +#define USBH_PORTSTAT_CONNECTSC (1 << 16) +#define USBH_PORTSTAT_LSDEVCON (1 << 9) +#define USBH_PORTSTAT_PRTPWRST (1 << 8) +#define USBH_PORTSTAT_PRTRSTST (1 << 4) +#define USBH_PORTSTAT_PRTOVRCURI (1 << 3) +#define USBH_PORTSTAT_PRTSUSPST (1 << 2) +#define USBH_PORTSTAT_PRTENABST (1 << 1) +#define USBH_PORTSTAT_CURCONST (1 << 0) + +#define USB_DMAREV 0x800 +#define USB_DMAINTSTAT 0x804 +#define USB_DMAINTSTAT_EPERR (1 << 1) +#define USB_DMAINTSTAT_ETDERR (1 << 0) + +#define USB_DMAINTEN 0x808 +#define USB_DMAINTEN_EPERRINTEN (1 << 1) +#define USB_DMAINTEN_ETDERRINTEN (1 << 0) + +#define USB_ETDDMAERSTAT 0x80c +#define USB_EPDMAERSTAT 0x810 +#define USB_ETDDMAEN 0x820 +#define USB_EPDMAEN 0x824 +#define USB_ETDDMAXTEN 0x828 +#define USB_EPDMAXTEN 0x82c +#define USB_ETDDMAENXYT 0x830 +#define USB_EPDMAENXYT 0x834 +#define USB_ETDDMABST4EN 0x838 +#define USB_EPDMABST4EN 0x83c + +#define USB_MISCCONTROL 0x840 +#define USB_MISCCONTROL_ISOPREVFRM (1 << 3) +#define USB_MISCCONTROL_SKPRTRY (1 << 2) +#define USB_MISCCONTROL_ARBMODE (1 << 1) +#define USB_MISCCONTROL_FILTCC (1 << 0) + +#define USB_ETDDMACHANLCLR 0x848 +#define USB_EPDMACHANLCLR 0x84c +#define USB_ETDSMSA(x) (0x900 + ((x) * 4)) +#define USB_EPSMSA(x) (0x980 + ((x) * 4)) +#define USB_ETDDMABUFPTR(x) (0xa00 + ((x) * 4)) +#define USB_EPDMABUFPTR(x) (0xa80 + ((x) * 4)) + +#define USB_ETD_DWORD(x, w) (0x200 + ((x) * 16) + ((w) * 4)) +#define DW0_ADDRESS 0 +#define DW0_ENDPNT 7 +#define DW0_DIRECT 11 +#define DW0_SPEED 13 +#define DW0_FORMAT 14 +#define DW0_MAXPKTSIZ 16 +#define DW0_HALTED 27 +#define DW0_TOGCRY 28 +#define DW0_SNDNAK 30 + +#define DW1_XBUFSRTAD 0 +#define DW1_YBUFSRTAD 16 + +#define DW2_RTRYDELAY 0 +#define DW2_POLINTERV 0 +#define DW2_STARTFRM 0 +#define DW2_RELPOLPOS 8 +#define DW2_DIRPID 16 +#define DW2_BUFROUND 18 +#define DW2_DELAYINT 19 +#define DW2_DATATOG 22 +#define DW2_ERRORCNT 24 +#define DW2_COMPCODE 28 + +#define DW3_TOTBYECNT 0 +#define DW3_PKTLEN0 0 +#define DW3_COMPCODE0 12 +#define DW3_PKTLEN1 16 +#define DW3_BUFSIZE 21 +#define DW3_COMPCODE1 28 + +#define USBCTRL 0x600 +#define USBCTRL_I2C_WU_INT_STAT (1 << 27) +#define USBCTRL_OTG_WU_INT_STAT (1 << 26) +#define USBCTRL_HOST_WU_INT_STAT (1 << 25) +#define USBCTRL_FNT_WU_INT_STAT (1 << 24) +#define USBCTRL_I2C_WU_INT_EN (1 << 19) +#define USBCTRL_OTG_WU_INT_EN (1 << 18) +#define USBCTRL_HOST_WU_INT_EN (1 << 17) +#define USBCTRL_FNT_WU_INT_EN (1 << 16) +#define USBCTRL_OTC_RCV_RXDP (1 << 13) +#define USBCTRL_HOST1_BYP_TLL (1 << 12) +#define USBCTRL_OTG_BYP_VAL(x) ((x) << 10) +#define USBCTRL_HOST1_BYP_VAL(x) ((x) << 8) +#define USBCTRL_OTG_PWR_MASK (1 << 6) +#define USBCTRL_HOST1_PWR_MASK (1 << 5) +#define USBCTRL_HOST2_PWR_MASK (1 << 4) +#define USBCTRL_USB_BYP (1 << 2) +#define USBCTRL_HOST1_TXEN_OE (1 << 1) + + +/* Values in TD blocks */ +#define TD_DIR_SETUP 0 +#define TD_DIR_OUT 1 +#define TD_DIR_IN 2 +#define TD_FORMAT_CONTROL 0 +#define TD_FORMAT_ISO 1 +#define TD_FORMAT_BULK 2 +#define TD_FORMAT_INT 3 +#define TD_TOGGLE_CARRY 0 +#define TD_TOGGLE_DATA0 2 +#define TD_TOGGLE_DATA1 3 + +/* control transfer states */ +#define US_CTRL_SETUP 2 +#define US_CTRL_DATA 1 +#define US_CTRL_ACK 0 + +/* bulk transfer main state and 0-length packet */ +#define US_BULK 1 +#define US_BULK0 0 + +/*ETD format description*/ +#define IMX_FMT_CTRL 0x0 +#define IMX_FMT_ISO 0x1 +#define IMX_FMT_BULK 0x2 +#define IMX_FMT_INT 0x3 + +static char fmt_urb_to_etd[4] = { +/*PIPE_ISOCHRONOUS*/ IMX_FMT_ISO, +/*PIPE_INTERRUPT*/ IMX_FMT_INT, +/*PIPE_CONTROL*/ IMX_FMT_CTRL, +/*PIPE_BULK*/ IMX_FMT_BULK +}; + +/* condition (error) CC codes and mapping (OHCI like) */ + +#define TD_CC_NOERROR 0x00 +#define TD_CC_CRC 0x01 +#define TD_CC_BITSTUFFING 0x02 +#define TD_CC_DATATOGGLEM 0x03 +#define TD_CC_STALL 0x04 +#define TD_DEVNOTRESP 0x05 +#define TD_PIDCHECKFAIL 0x06 +/*#define TD_UNEXPECTEDPID 0x07 - reserved, not active on MX2*/ +#define TD_DATAOVERRUN 0x08 +#define TD_DATAUNDERRUN 0x09 +#define TD_BUFFEROVERRUN 0x0C +#define TD_BUFFERUNDERRUN 0x0D +#define TD_SCHEDULEOVERRUN 0x0E +#define TD_NOTACCESSED 0x0F + +static const int cc_to_error[16] = { + /* No Error */ 0, + /* CRC Error */ -EILSEQ, + /* Bit Stuff */ -EPROTO, + /* Data Togg */ -EILSEQ, + /* Stall */ -EPIPE, + /* DevNotResp */ -ETIMEDOUT, + /* PIDCheck */ -EPROTO, + /* UnExpPID */ -EPROTO, + /* DataOver */ -EOVERFLOW, + /* DataUnder */ -EREMOTEIO, + /* (for hw) */ -EIO, + /* (for hw) */ -EIO, + /* BufferOver */ -ECOMM, + /* BuffUnder */ -ENOSR, + /* (for HCD) */ -ENOSPC, + /* (for HCD) */ -EALREADY +}; + +/* HCD data associated with a usb core URB */ +struct urb_priv { + struct urb *urb; + struct usb_host_endpoint *ep; + int active; + int state; + struct td *isoc_td; + int isoc_remaining; + int isoc_status; +}; + +/* HCD data associated with a usb core endpoint */ +struct ep_priv { + struct usb_host_endpoint *ep; + struct list_head td_list; + struct list_head queue; + int etd[NUM_ISO_ETDS]; + int waiting_etd; +}; + +/* isoc packet */ +struct td { + struct list_head list; + struct urb *urb; + struct usb_host_endpoint *ep; + dma_addr_t data; + unsigned long buf_addr; + int len; + int frame; + int isoc_index; +}; + +/* HCD data associated with a hardware ETD */ +struct etd_priv { + struct usb_host_endpoint *ep; + struct urb *urb; + struct td *td; + struct list_head queue; + dma_addr_t dma_handle; + int alloc; + int len; + int dmem_size; + int dmem_offset; + int active_count; +#ifdef DEBUG + int activated_frame; + int disactivated_frame; + int last_int_frame; + int last_req_frame; + u32 submitted_dwords[4]; +#endif +}; + +/* Hardware data memory info */ +struct imx21_dmem_area { + struct usb_host_endpoint *ep; + unsigned int offset; + unsigned int size; + struct list_head list; +}; + +#ifdef DEBUG +struct debug_usage_stats { + unsigned int value; + unsigned int maximum; +}; + +struct debug_stats { + unsigned long submitted; + unsigned long completed_ok; + unsigned long completed_failed; + unsigned long unlinked; + unsigned long queue_etd; + unsigned long queue_dmem; +}; + +struct debug_isoc_trace { + int schedule_frame; + int submit_frame; + int request_len; + int done_frame; + int done_len; + int cc; + struct td *td; +}; +#endif + +/* HCD data structure */ +struct imx21 { + spinlock_t lock; + struct device *dev; + struct mx21_usbh_platform_data *pdata; + struct list_head dmem_list; + struct list_head queue_for_etd; /* eps queued due to etd shortage */ + struct list_head queue_for_dmem; /* etds queued due to dmem shortage */ + struct etd_priv etd[USB_NUM_ETD]; + struct clk *clk; + void __iomem *regs; +#ifdef DEBUG + struct dentry *debug_root; + struct debug_stats nonisoc_stats; + struct debug_stats isoc_stats; + struct debug_usage_stats etd_usage; + struct debug_usage_stats dmem_usage; + struct debug_isoc_trace isoc_trace[20]; + struct debug_isoc_trace isoc_trace_failed[20]; + unsigned long debug_unblocks; + int isoc_trace_index; + int isoc_trace_index_failed; +#endif +}; + +#endif -- cgit v0.10.2 From 3eb352c73c99602fd379782284ea2de1476c4f9d Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Sat, 21 Nov 2009 12:14:54 +0100 Subject: USB: MXC: use DMA_BIT_MASK macro rather than hardcoded constants. Also fixes tab/space issue causing checkpatch to complain. Signed-off-by: Martin Fuzzey Signed-off-by: Greg Kroah-Hartman diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c index 3d398ce..4acab18 100644 --- a/arch/arm/mach-mx2/devices.c +++ b/arch/arm/mach-mx2/devices.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include @@ -292,7 +293,7 @@ struct platform_device mxc_fb_device = { .num_resources = ARRAY_SIZE(mxc_fb), .resource = mxc_fb, .dev = { - .coherent_dma_mask = 0xFFFFFFFF, + .coherent_dma_mask = DMA_BIT_MASK(32), }, }; @@ -395,17 +396,17 @@ static struct resource mxc_sdhc1_resources[] = { }, }; -static u64 mxc_sdhc1_dmamask = 0xffffffffUL; +static u64 mxc_sdhc1_dmamask = DMA_BIT_MASK(32); struct platform_device mxc_sdhc_device0 = { - .name = "mxc-mmc", - .id = 0, - .dev = { - .dma_mask = &mxc_sdhc1_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(mxc_sdhc1_resources), - .resource = mxc_sdhc1_resources, + .name = "mxc-mmc", + .id = 0, + .dev = { + .dma_mask = &mxc_sdhc1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(mxc_sdhc1_resources), + .resource = mxc_sdhc1_resources, }; static struct resource mxc_sdhc2_resources[] = { @@ -424,17 +425,17 @@ static struct resource mxc_sdhc2_resources[] = { }, }; -static u64 mxc_sdhc2_dmamask = 0xffffffffUL; +static u64 mxc_sdhc2_dmamask = DMA_BIT_MASK(32); struct platform_device mxc_sdhc_device1 = { - .name = "mxc-mmc", - .id = 1, - .dev = { - .dma_mask = &mxc_sdhc2_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(mxc_sdhc2_resources), - .resource = mxc_sdhc2_resources, + .name = "mxc-mmc", + .id = 1, + .dev = { + .dma_mask = &mxc_sdhc2_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(mxc_sdhc2_resources), + .resource = mxc_sdhc2_resources, }; #ifdef CONFIG_MACH_MX27 @@ -450,7 +451,7 @@ static struct resource otg_resources[] = { }, }; -static u64 otg_dmamask = 0xffffffffUL; +static u64 otg_dmamask = DMA_BIT_MASK(32); /* OTG gadget device */ struct platform_device mxc_otg_udc_device = { @@ -458,7 +459,7 @@ struct platform_device mxc_otg_udc_device = { .id = -1, .dev = { .dma_mask = &otg_dmamask, - .coherent_dma_mask = 0xffffffffUL, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = otg_resources, .num_resources = ARRAY_SIZE(otg_resources), @@ -469,7 +470,7 @@ struct platform_device mxc_otg_host = { .name = "mxc-ehci", .id = 0, .dev = { - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .dma_mask = &otg_dmamask, }, .resource = otg_resources, @@ -478,7 +479,7 @@ struct platform_device mxc_otg_host = { /* USB host 1 */ -static u64 usbh1_dmamask = 0xffffffffUL; +static u64 usbh1_dmamask = DMA_BIT_MASK(32); static struct resource mxc_usbh1_resources[] = { { @@ -496,7 +497,7 @@ struct platform_device mxc_usbh1 = { .name = "mxc-ehci", .id = 1, .dev = { - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .dma_mask = &usbh1_dmamask, }, .resource = mxc_usbh1_resources, @@ -504,7 +505,7 @@ struct platform_device mxc_usbh1 = { }; /* USB host 2 */ -static u64 usbh2_dmamask = 0xffffffffUL; +static u64 usbh2_dmamask = DMA_BIT_MASK(32); static struct resource mxc_usbh2_resources[] = { { @@ -522,7 +523,7 @@ struct platform_device mxc_usbh2 = { .name = "mxc-ehci", .id = 2, .dev = { - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .dma_mask = &usbh2_dmamask, }, .resource = mxc_usbh2_resources, -- cgit v0.10.2 From 4e0fa90d1de10d68429afa9353e10bb9436455db Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Sat, 21 Nov 2009 12:14:58 +0100 Subject: USB: MXC: add platform resources for i.MX21 USB host controller. Signed-off-by: Martin Fuzzey Signed-off-by: Greg Kroah-Hartman diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c index 4acab18..3956d82 100644 --- a/arch/arm/mach-mx2/devices.c +++ b/arch/arm/mach-mx2/devices.c @@ -643,3 +643,30 @@ int __init mxc_register_gpios(void) { return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports)); } + +#ifdef CONFIG_MACH_MX21 +static struct resource mx21_usbhc_resources[] = { + { + .start = USBOTG_BASE_ADDR, + .end = USBOTG_BASE_ADDR + 0x1FFF, + .flags = IORESOURCE_MEM, + }, + { + .start = MXC_INT_USBHOST, + .end = MXC_INT_USBHOST, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mx21_usbhc_device = { + .name = "imx21-hcd", + .id = 0, + .dev = { + .dma_mask = &mx21_usbhc_device.dev.coherent_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(mx21_usbhc_resources), + .resource = mx21_usbhc_resources, +}; +#endif + diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h index 97306aa..f12694b 100644 --- a/arch/arm/mach-mx2/devices.h +++ b/arch/arm/mach-mx2/devices.h @@ -26,5 +26,6 @@ extern struct platform_device mxc_usbh2; extern struct platform_device mxc_spi_device0; extern struct platform_device mxc_spi_device1; extern struct platform_device mxc_spi_device2; +extern struct platform_device mx21_usbhc_device; extern struct platform_device imx_ssi_device0; extern struct platform_device imx_ssi_device1; -- cgit v0.10.2 From 1bfbd283cd3082b6cadfbf340faf7d35b8a36b83 Mon Sep 17 00:00:00 2001 From: Simon Arlott Date: Sat, 21 Nov 2009 15:03:23 +0000 Subject: USB: cxacru: return an empty value for modulation if there is no connection When there is no connection, return an empty string instead of "0" for the connection modulation. Signed-off-by: Simon Arlott Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/networking/cxacru.txt b/Documentation/networking/cxacru.txt index b074681..3532cee 100644 --- a/Documentation/networking/cxacru.txt +++ b/Documentation/networking/cxacru.txt @@ -61,6 +61,7 @@ several sysfs attribute files for retrieving device statistics: * mac_address * modulation + "" (when not connected) "ANSI T1.413" "ITU-T G.992.1 (G.DMT)" "ITU-T G.992.2 (G.LITE)" diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c index 56802d2..4a26a6c 100644 --- a/drivers/usb/atm/cxacru.c +++ b/drivers/usb/atm/cxacru.c @@ -267,12 +267,12 @@ static ssize_t cxacru_sysfs_showattr_LINE(u32 value, char *buf) static ssize_t cxacru_sysfs_showattr_MODU(u32 value, char *buf) { static char *str[] = { - NULL, + "", "ANSI T1.413", "ITU-T G.992.1 (G.DMT)", "ITU-T G.992.2 (G.LITE)" }; - if (unlikely(value >= ARRAY_SIZE(str) || str[value] == NULL)) + if (unlikely(value >= ARRAY_SIZE(str))) return snprintf(buf, PAGE_SIZE, "%u\n", value); return snprintf(buf, PAGE_SIZE, "%s\n", str[value]); } -- cgit v0.10.2 From 5d0a9c7932c45435de72b5a5b2825c7eb34186a4 Mon Sep 17 00:00:00 2001 From: Simon Arlott Date: Sat, 21 Nov 2009 15:07:14 +0000 Subject: USB: cxacru: check data length is not negative When attempting to read data that is not actually an array of values, the length may be negative which causes an Oops due to a likely access off the end of the data array. This bug should not occur under normal use unless the device returns an invalid response. Signed-off-by: Simon Arlott Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c index 4a26a6c..8da4a06 100644 --- a/drivers/usb/atm/cxacru.c +++ b/drivers/usb/atm/cxacru.c @@ -596,7 +596,7 @@ static int cxacru_cm_get_array(struct cxacru_data *instance, enum cxacru_cm_requ len = ret / 4; for (offb = 0; offb < len; ) { int l = le32_to_cpu(buf[offb++]); - if (l > stride || l > (len - offb) / 2) { + if (l < 0 || l > stride || l > (len - offb) / 2) { if (printk_ratelimit()) usb_err(instance->usbatm, "invalid data length from cm %#x: %d\n", cm, l); -- cgit v0.10.2 From 9fc950d322380dda8e9bc8debe89766085e7a0eb Mon Sep 17 00:00:00 2001 From: Simon Arlott Date: Sat, 21 Nov 2009 15:33:51 +0000 Subject: USB: cxacru: check device isn't being removed during sysfs calls It is possible for usb_get_intfdata() to return NULL if sysfs is accessed while the module is being unloaded or the device is being removed. Move the access code to an inline function in usbatm.h, and return -ENODEV if any of the pointers are NULL. It should not be possible for the instance data or atm device to be invalid until after unbind() completes and the sysfs attributes have been removed. Signed-off-by: Simon Arlott Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c index 8da4a06..4bead3d 100644 --- a/drivers/usb/atm/cxacru.c +++ b/drivers/usb/atm/cxacru.c @@ -200,9 +200,12 @@ static DEVICE_ATTR(_name, S_IWUSR | S_IRUGO, \ static ssize_t cxacru_sysfs_show_##_name(struct device *dev, \ struct device_attribute *attr, char *buf) \ { \ - struct usb_interface *intf = to_usb_interface(dev); \ - struct usbatm_data *usbatm_instance = usb_get_intfdata(intf); \ - struct cxacru_data *instance = usbatm_instance->driver_data; \ + struct cxacru_data *instance = to_usbatm_driver_data(\ + to_usb_interface(dev)); \ +\ + if (instance == NULL) \ + return -ENODEV; \ +\ return cxacru_sysfs_showattr_##_type(instance->card_info[_value], buf); \ } \ CXACRU__ATTR_INIT(_name) @@ -288,22 +291,28 @@ static ssize_t cxacru_sysfs_showattr_MODU(u32 value, char *buf) static ssize_t cxacru_sysfs_show_mac_address(struct device *dev, struct device_attribute *attr, char *buf) { - struct usb_interface *intf = to_usb_interface(dev); - struct usbatm_data *usbatm_instance = usb_get_intfdata(intf); - struct atm_dev *atm_dev = usbatm_instance->atm_dev; + struct cxacru_data *instance = to_usbatm_driver_data( + to_usb_interface(dev)); - return snprintf(buf, PAGE_SIZE, "%pM\n", atm_dev->esi); + if (instance == NULL || instance->usbatm->atm_dev == NULL) + return -ENODEV; + + return snprintf(buf, PAGE_SIZE, "%pM\n", + instance->usbatm->atm_dev->esi); } static ssize_t cxacru_sysfs_show_adsl_state(struct device *dev, struct device_attribute *attr, char *buf) { - struct usb_interface *intf = to_usb_interface(dev); - struct usbatm_data *usbatm_instance = usb_get_intfdata(intf); - struct cxacru_data *instance = usbatm_instance->driver_data; - u32 value = instance->card_info[CXINF_LINE_STARTABLE]; - static char *str[] = { "running", "stopped" }; + struct cxacru_data *instance = to_usbatm_driver_data( + to_usb_interface(dev)); + u32 value; + + if (instance == NULL) + return -ENODEV; + + value = instance->card_info[CXINF_LINE_STARTABLE]; if (unlikely(value >= ARRAY_SIZE(str))) return snprintf(buf, PAGE_SIZE, "%u\n", value); return snprintf(buf, PAGE_SIZE, "%s\n", str[value]); @@ -312,9 +321,8 @@ static ssize_t cxacru_sysfs_show_adsl_state(struct device *dev, static ssize_t cxacru_sysfs_store_adsl_state(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct usb_interface *intf = to_usb_interface(dev); - struct usbatm_data *usbatm_instance = usb_get_intfdata(intf); - struct cxacru_data *instance = usbatm_instance->driver_data; + struct cxacru_data *instance = to_usbatm_driver_data( + to_usb_interface(dev)); int ret; int poll = -1; char str_cmd[8]; @@ -328,13 +336,16 @@ static ssize_t cxacru_sysfs_store_adsl_state(struct device *dev, return -EINVAL; ret = 0; + if (instance == NULL) + return -ENODEV; + if (mutex_lock_interruptible(&instance->adsl_state_serialize)) return -ERESTARTSYS; if (!strcmp(str_cmd, "stop") || !strcmp(str_cmd, "restart")) { ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_STOP, NULL, 0, NULL, 0); if (ret < 0) { - atm_err(usbatm_instance, "change adsl state:" + atm_err(instance->usbatm, "change adsl state:" " CHIP_ADSL_LINE_STOP returned %d\n", ret); ret = -EIO; @@ -354,7 +365,7 @@ static ssize_t cxacru_sysfs_store_adsl_state(struct device *dev, if (!strcmp(str_cmd, "start") || !strcmp(str_cmd, "restart")) { ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_START, NULL, 0, NULL, 0); if (ret < 0) { - atm_err(usbatm_instance, "change adsl state:" + atm_err(instance->usbatm, "change adsl state:" " CHIP_ADSL_LINE_START returned %d\n", ret); ret = -EIO; @@ -649,9 +660,6 @@ static int cxacru_atm_start(struct usbatm_data *usbatm_instance, { struct cxacru_data *instance = usbatm_instance->driver_data; struct usb_interface *intf = usbatm_instance->usb_intf; - /* - struct atm_dev *atm_dev = usbatm_instance->atm_dev; - */ int ret; int start_polling = 1; diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c index fbea856..4038043 100644 --- a/drivers/usb/atm/usbatm.c +++ b/drivers/usb/atm/usbatm.c @@ -1333,6 +1333,7 @@ void usbatm_usb_disconnect(struct usb_interface *intf) if (instance->atm_dev) { sysfs_remove_link(&instance->atm_dev->class_dev.kobj, "device"); atm_dev_deregister(instance->atm_dev); + instance->atm_dev = NULL; } usbatm_put_instance(instance); /* taken in usbatm_usb_probe */ diff --git a/drivers/usb/atm/usbatm.h b/drivers/usb/atm/usbatm.h index f6f4508..0863f85 100644 --- a/drivers/usb/atm/usbatm.h +++ b/drivers/usb/atm/usbatm.h @@ -204,4 +204,19 @@ struct usbatm_data { struct urb *urbs[0]; }; +static inline void *to_usbatm_driver_data(struct usb_interface *intf) +{ + struct usbatm_data *usbatm_instance; + + if (intf == NULL) + return NULL; + + usbatm_instance = usb_get_intfdata(intf); + + if (usbatm_instance == NULL) /* set NULL before unbind() */ + return NULL; + + return usbatm_instance->driver_data; /* set NULL after unbind() */ +} + #endif /* _USBATM_H_ */ -- cgit v0.10.2 From c68bb0d738897ed39b90c7ccb22e01c938117051 Mon Sep 17 00:00:00 2001 From: Simon Arlott Date: Sat, 21 Nov 2009 15:12:21 +0000 Subject: USB: cxacru: document how to interact with the flash memory These commands were found by accident... fortunately it still works even if the flash memory is erased, despite having no USB device IDs. Some example sysfs code for raw command access: http://simon.arlott.org/pub/cxacru/raw.c Signed-off-by: Simon Arlott Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c index 4bead3d..5dc2138 100644 --- a/drivers/usb/atm/cxacru.c +++ b/drivers/usb/atm/cxacru.c @@ -105,6 +105,26 @@ enum cxacru_cm_request { CM_REQUEST_MAX, }; +/* commands for interaction with the flash memory + * + * read: response is the contents of the first 60 bytes of flash memory + * write: request contains the 60 bytes of data to write to flash memory + * response is the contents of the first 60 bytes of flash memory + * + * layout: PP PP VV VV MM MM MM MM MM MM ?? ?? SS SS SS SS SS SS SS SS + * SS SS SS SS SS SS SS SS 00 00 00 00 00 00 00 00 00 00 00 00 + * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + * + * P: le16 USB Product ID + * V: le16 USB Vendor ID + * M: be48 MAC Address + * S: le16 ASCII Serial Number + */ +enum cxacru_cm_flash { + CM_FLASH_READ = 0xa1, + CM_FLASH_WRITE = 0xa2 +}; + /* reply codes to the commands above */ enum cxacru_cm_status { CM_STATUS_UNDEFINED, -- cgit v0.10.2 From 885582c48e5fbf47ccc4273aaa5f2f56ad513253 Mon Sep 17 00:00:00 2001 From: Simon Arlott Date: Sat, 21 Nov 2009 15:12:56 +0000 Subject: USB: cxacru: firmware writes on OHCI are slow, log progress Firmware writing takes 256ms per 4KB with OHCI, which is very slow compared to 7ms per 4KB with UHCI. Until I have access to a hardware USB analyser it may not be possible to determine why this happens. Instead of appearing to do nothing, log progress when writing firmware and then log the ATM device information when finished. Remove an unnecessary 4 second delay. Signed-off-by: Simon Arlott Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c index 5dc2138..5e3d7b9 100644 --- a/drivers/usb/atm/cxacru.c +++ b/drivers/usb/atm/cxacru.c @@ -725,6 +725,9 @@ static int cxacru_atm_start(struct usbatm_data *usbatm_instance, mutex_unlock(&instance->poll_state_serialize); mutex_unlock(&instance->adsl_state_serialize); + printk(KERN_INFO "%s%d: %s %pM\n", atm_dev->type, atm_dev->number, + usbatm_instance->description, atm_dev->esi); + if (start_polling) cxacru_poll_status(&instance->poll_work.work); return 0; @@ -939,6 +942,7 @@ static void cxacru_upload_firmware(struct cxacru_data *instance, } /* Firmware */ + usb_info(usbatm, "loading firmware\n"); ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, FW_ADDR, fw->data, fw->size); if (ret) { usb_err(usbatm, "Firmware upload failed: %d\n", ret); @@ -947,6 +951,7 @@ static void cxacru_upload_firmware(struct cxacru_data *instance, /* Boot ROM patch */ if (instance->modem_type->boot_rom_patch) { + usb_info(usbatm, "loading boot ROM patch\n"); ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, BR_ADDR, bp->data, bp->size); if (ret) { usb_err(usbatm, "Boot ROM patching failed: %d\n", ret); @@ -961,6 +966,7 @@ static void cxacru_upload_firmware(struct cxacru_data *instance, return; } + usb_info(usbatm, "starting device\n"); if (instance->modem_type->boot_rom_patch) { val = cpu_to_le32(BR_ADDR); ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, BR_STACK_ADDR, (u8 *) &val, 4); @@ -1004,8 +1010,6 @@ static void cxacru_upload_firmware(struct cxacru_data *instance, return; } } - - msleep_interruptible(4000); } static int cxacru_find_firmware(struct cxacru_data *instance, -- cgit v0.10.2 From 4ac37208e9b30b36b615ed22a79b4ee787fdc9b5 Mon Sep 17 00:00:00 2001 From: Simon Arlott Date: Sat, 21 Nov 2009 15:14:01 +0000 Subject: USB: cxacru: add write-only sysfs attribute for modem configuration The modem can be configured using CM_REQUEST_CARD_DATA_SET, although CM_REQUEST_CARD_DATA_GET does not return any data. Tested by setting the modulation (0x0a) option. There is a list of parameters in the following archive, but the meaning of many of them is not well documented: http://sourceforge.net/project/shownotes.php?release_id=301825 This source also indicates that the highest parameter set is 0x4a but this varies by model so an arbitrary limit of 0x7f has been used (the index is a 32-bit integer). Signed-off-by: Simon Arlott Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/networking/cxacru.txt b/Documentation/networking/cxacru.txt index 3532cee..f4fbf4c 100644 --- a/Documentation/networking/cxacru.txt +++ b/Documentation/networking/cxacru.txt @@ -15,6 +15,15 @@ several sysfs attribute files for retrieving device statistics: * adsl_headend_environment Information about the remote headend. +* adsl_config + Configuration writing interface. + Write parameters in hexadecimal format =, + separated by whitespace, e.g.: + "1=0 a=5" + Up to 7 parameters at a time will be sent and the modem will restart + the ADSL connection when any value is set. These are logged for future + reference. + * downstream_attenuation (dB) * downstream_bits_per_frame * downstream_rate (kbps) diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c index 5e3d7b9..c2163d0 100644 --- a/drivers/usb/atm/cxacru.c +++ b/drivers/usb/atm/cxacru.c @@ -52,6 +52,7 @@ static const char cxacru_driver_name[] = "cxacru"; #define CXACRU_EP_DATA 0x02 /* Bulk in/out */ #define CMD_PACKET_SIZE 64 /* Should be maxpacket(ep)? */ +#define CMD_MAX_CONFIG ((CMD_PACKET_SIZE / 4 - 1) / 2) /* Addresses */ #define PLLFCLK_ADDR 0x00350068 @@ -216,6 +217,10 @@ static DEVICE_ATTR(_name, S_IRUGO, cxacru_sysfs_show_##_name, NULL) static DEVICE_ATTR(_name, S_IWUSR | S_IRUGO, \ cxacru_sysfs_show_##_name, cxacru_sysfs_store_##_name) +#define CXACRU_SET_INIT(_name) \ +static DEVICE_ATTR(_name, S_IWUSR, \ + NULL, cxacru_sysfs_store_##_name) + #define CXACRU_ATTR_INIT(_value, _type, _name) \ static ssize_t cxacru_sysfs_show_##_name(struct device *dev, \ struct device_attribute *attr, char *buf) \ @@ -232,10 +237,12 @@ CXACRU__ATTR_INIT(_name) #define CXACRU_ATTR_CREATE(_v, _t, _name) CXACRU_DEVICE_CREATE_FILE(_name) #define CXACRU_CMD_CREATE(_name) CXACRU_DEVICE_CREATE_FILE(_name) +#define CXACRU_SET_CREATE(_name) CXACRU_DEVICE_CREATE_FILE(_name) #define CXACRU__ATTR_CREATE(_name) CXACRU_DEVICE_CREATE_FILE(_name) #define CXACRU_ATTR_REMOVE(_v, _t, _name) CXACRU_DEVICE_REMOVE_FILE(_name) #define CXACRU_CMD_REMOVE(_name) CXACRU_DEVICE_REMOVE_FILE(_name) +#define CXACRU_SET_REMOVE(_name) CXACRU_DEVICE_REMOVE_FILE(_name) #define CXACRU__ATTR_REMOVE(_name) CXACRU_DEVICE_REMOVE_FILE(_name) static ssize_t cxacru_sysfs_showattr_u32(u32 value, char *buf) @@ -438,6 +445,72 @@ static ssize_t cxacru_sysfs_store_adsl_state(struct device *dev, return ret; } +/* CM_REQUEST_CARD_DATA_GET times out, so no show attribute */ + +static ssize_t cxacru_sysfs_store_adsl_config(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct cxacru_data *instance = to_usbatm_driver_data( + to_usb_interface(dev)); + int len = strlen(buf); + int ret, pos, num; + __le32 data[CMD_PACKET_SIZE / 4]; + + if (!capable(CAP_NET_ADMIN)) + return -EACCES; + + if (instance == NULL) + return -ENODEV; + + pos = 0; + num = 0; + while (pos < len) { + int tmp; + u32 index; + u32 value; + + ret = sscanf(buf + pos, "%x=%x%n", &index, &value, &tmp); + if (ret < 2) + return -EINVAL; + if (index < 0 || index > 0x7f) + return -EINVAL; + pos += tmp; + + /* skip trailing newline */ + if (buf[pos] == '\n' && pos == len-1) + pos++; + + data[num * 2 + 1] = cpu_to_le32(index); + data[num * 2 + 2] = cpu_to_le32(value); + num++; + + /* send config values when data buffer is full + * or no more data + */ + if (pos >= len || num >= CMD_MAX_CONFIG) { + char log[CMD_MAX_CONFIG * 12 + 1]; /* %02x=%08x */ + + data[0] = cpu_to_le32(num); + ret = cxacru_cm(instance, CM_REQUEST_CARD_DATA_SET, + (u8 *) data, 4 + num * 8, NULL, 0); + if (ret < 0) { + atm_err(instance->usbatm, + "set card data returned %d\n", ret); + return -EIO; + } + + for (tmp = 0; tmp < num; tmp++) + snprintf(log + tmp*12, 13, " %02x=%08x", + le32_to_cpu(data[tmp * 2 + 1]), + le32_to_cpu(data[tmp * 2 + 2])); + atm_info(instance->usbatm, "config%s\n", log); + num = 0; + } + } + + return len; +} + /* * All device attributes are included in CXACRU_ALL_FILES * so that the same list can be used multiple times: @@ -473,7 +546,8 @@ CXACRU_ATTR_##_action(CXINF_MODULATION, MODU, modulation); \ CXACRU_ATTR_##_action(CXINF_ADSL_HEADEND, u32, adsl_headend); \ CXACRU_ATTR_##_action(CXINF_ADSL_HEADEND_ENVIRONMENT, u32, adsl_headend_environment); \ CXACRU_ATTR_##_action(CXINF_CONTROLLER_VERSION, u32, adsl_controller_version); \ -CXACRU_CMD_##_action( adsl_state); +CXACRU_CMD_##_action( adsl_state); \ +CXACRU_SET_##_action( adsl_config); CXACRU_ALL_FILES(INIT); -- cgit v0.10.2 From 817db5b34e70650c488f22b072b7efb950812adb Mon Sep 17 00:00:00 2001 From: Simon Arlott Date: Sat, 21 Nov 2009 15:15:47 +0000 Subject: USB: cxacru: remove cxacru-cf.bin loader This has never worked properly because wsize passed to cxacru_cm() is incorrectly set to the number of values instead of the data bytes. The maximum number of values that can be set at once is 7 which means the device will not get enough data to work with and none of the configuration values will be used. At least one existing cxacru-cf.bin file contains invalid data which will prevent the modem from syncing properly. Fixing it is likely to break existing systems, and the new sysfs interface for setting configuration parameters can provide the same functionality. A script is provided to convert from the original format. Signed-off-by: Simon Arlott Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX index 50189bf..fe5c099 100644 --- a/Documentation/networking/00-INDEX +++ b/Documentation/networking/00-INDEX @@ -32,6 +32,8 @@ cs89x0.txt - the Crystal LAN (CS8900/20-based) Ethernet ISA adapter driver cxacru.txt - Conexant AccessRunner USB ADSL Modem +cxacru-cf.py + - Conexant AccessRunner USB ADSL Modem configuration file parser de4x5.txt - the Digital EtherWORKS DE4?? and DE5?? PCI Ethernet driver decnet.txt diff --git a/Documentation/networking/cxacru-cf.py b/Documentation/networking/cxacru-cf.py new file mode 100644 index 0000000..b41d298 --- /dev/null +++ b/Documentation/networking/cxacru-cf.py @@ -0,0 +1,48 @@ +#!/usr/bin/env python +# Copyright 2009 Simon Arlott +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the Free +# Software Foundation; either version 2 of the License, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# You should have received a copy of the GNU General Public License along with +# this program; if not, write to the Free Software Foundation, Inc., 59 +# Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# Usage: cxacru-cf.py < cxacru-cf.bin +# Output: values string suitable for the sysfs adsl_config attribute +# +# Warning: cxacru-cf.bin with MD5 hash cdbac2689969d5ed5d4850f117702110 +# contains mis-aligned values which will stop the modem from being able +# to make a connection. If the first and last two bytes are removed then +# the values become valid, but the modulation will be forced to ANSI +# T1.413 only which may not be appropriate. +# +# The original binary format is a packed list of le32 values. + +import sys +import struct + +i = 0 +while True: + buf = sys.stdin.read(4) + + if len(buf) == 0: + break + elif len(buf) != 4: + sys.stdout.write("\n") + sys.stderr.write("Error: read {0} not 4 bytes\n".format(len(buf))) + sys.exit(1) + + if i > 0: + sys.stdout.write(" ") + sys.stdout.write("{0:x}={1}".format(i, struct.unpack("usbatm; struct usb_device *usb_dev = usbatm->usb_dev; __le16 signature[] = { usb_dev->descriptor.idVendor, @@ -1066,24 +1064,6 @@ static void cxacru_upload_firmware(struct cxacru_data *instance, usb_err(usbatm, "modem failed to initialize: %d\n", ret); return; } - - /* Load config data (le32), doing one packet at a time */ - if (cf) - for (off = 0; off < cf->size / 4; ) { - __le32 buf[CMD_PACKET_SIZE / 4 - 1]; - int i, len = min_t(int, cf->size / 4 - off, CMD_PACKET_SIZE / 4 / 2 - 1); - buf[0] = cpu_to_le32(len); - for (i = 0; i < len; i++, off++) { - buf[i * 2 + 1] = cpu_to_le32(off); - memcpy(buf + i * 2 + 2, cf->data + off * 4, 4); - } - ret = cxacru_cm(instance, CM_REQUEST_CARD_DATA_SET, - (u8 *) buf, len, NULL, 0); - if (ret < 0) { - usb_err(usbatm, "load config data failed: %d\n", ret); - return; - } - } } static int cxacru_find_firmware(struct cxacru_data *instance, @@ -1109,7 +1089,7 @@ static int cxacru_find_firmware(struct cxacru_data *instance, static int cxacru_heavy_init(struct usbatm_data *usbatm_instance, struct usb_interface *usb_intf) { - const struct firmware *fw, *bp, *cf; + const struct firmware *fw, *bp; struct cxacru_data *instance = usbatm_instance->driver_data; int ret = cxacru_find_firmware(instance, "fw", &fw); @@ -1127,13 +1107,8 @@ static int cxacru_heavy_init(struct usbatm_data *usbatm_instance, } } - if (cxacru_find_firmware(instance, "cf", &cf)) /* optional */ - cf = NULL; - - cxacru_upload_firmware(instance, fw, bp, cf); + cxacru_upload_firmware(instance, fw, bp); - if (cf) - release_firmware(cf); if (instance->modem_type->boot_rom_patch) release_firmware(bp); release_firmware(fw); -- cgit v0.10.2 From 30fa3d8ed0a61703281bde948f7590d843308b4a Mon Sep 17 00:00:00 2001 From: Simon Arlott Date: Sat, 21 Nov 2009 15:16:38 +0000 Subject: USB: cxacru: increment driver version Changes: Return an empty string for modulation when there is no connection Fix sysfs unload race conditions Log firmware load process, remove delay Add new configuration interface Remove cxacru-cf.bin Signed-off-by: Simon Arlott Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c index 2490c81..c89990f 100644 --- a/drivers/usb/atm/cxacru.c +++ b/drivers/usb/atm/cxacru.c @@ -5,6 +5,7 @@ * Copyright (C) 2004 David Woodhouse, Duncan Sands, Roman Kagan * Copyright (C) 2005 Duncan Sands, Roman Kagan (rkagan % mail ! ru) * Copyright (C) 2007 Simon Arlott + * Copyright (C) 2009 Simon Arlott * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free @@ -43,7 +44,7 @@ #include "usbatm.h" #define DRIVER_AUTHOR "Roman Kagan, David Woodhouse, Duncan Sands, Simon Arlott" -#define DRIVER_VERSION "0.3" +#define DRIVER_VERSION "0.4" #define DRIVER_DESC "Conexant AccessRunner ADSL USB modem driver" static const char cxacru_driver_name[] = "cxacru"; -- cgit v0.10.2 From e2b5cbfe77ecbbeccc38a486e054a59aaaf028c8 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sun, 22 Nov 2009 17:01:13 +0100 Subject: USB: ftdi_sio: fix error message on close Resubmitting read urb fails with -EPERM if completion handler runs while urb is being killed on close. This should not be reported as an error. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 7638828..22070ac 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1720,7 +1720,7 @@ static int ftdi_submit_read_urb(struct usb_serial_port *port, gfp_t mem_flags) urb->transfer_buffer_length, ftdi_read_bulk_callback, port); result = usb_submit_urb(urb, mem_flags); - if (result) + if (result && result != -EPERM) dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result); -- cgit v0.10.2 From 0076b4bec5cffff856ec4a91830c902fbd7870df Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sun, 22 Nov 2009 17:25:08 +0100 Subject: USB: ftdi_sio: remove obsolete comment We always push characters to ldisc immediately regardless of ASYNC_LOW_LATENCY. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 22070ac..ffc79ee 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1552,8 +1552,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) kref_init(&priv->kref); spin_lock_init(&priv->tx_lock); init_waitqueue_head(&priv->delta_msr_wait); - /* This will push the characters through immediately rather - than queue a task to deliver them */ + priv->flags = ASYNC_LOW_LATENCY; if (quirk && quirk->port_probe) -- cgit v0.10.2 From b4fc2aeef23b4b35809054ddf495f9efdc3ac9d6 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sun, 22 Nov 2009 17:42:34 +0100 Subject: USB: serial: fix typo in debug message Fixes confusing "serial_chars_in_buffer = port 0" messages. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 33c85f7..9c7e1d5 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -381,7 +381,7 @@ static int serial_write_room(struct tty_struct *tty) static int serial_chars_in_buffer(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - dbg("%s = port %d", __func__, port->number); + dbg("%s - port %d", __func__, port->number); /* if the device was unplugged then any remaining characters fell out of the connector ;) */ -- cgit v0.10.2 From 8c4f99cd54469d643e27a743045da848f7b63fe5 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sun, 22 Nov 2009 21:25:20 +0100 Subject: USB: ftdi_sio: fix initialisation of latency timeout Latency timeout was read but never stored on port probe. When ASYNC_LOW_LATENCY was cleared the device timeout would get set to 0 rather than the default 16ms. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index ffc79ee..9979d49 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1184,7 +1184,6 @@ static int read_latency_timer(struct usb_serial_port *port) unsigned short latency = 0; int rv = 0; - dbg("%s", __func__); rv = usb_control_msg(udev, @@ -1197,8 +1196,9 @@ static int read_latency_timer(struct usb_serial_port *port) if (rv < 0) { dev_err(&port->dev, "Unable to read latency timer: %i\n", rv); return -EIO; - } - return latency; + } else + priv->latency = latency; + return rv; } static int get_serial_info(struct usb_serial_port *port, @@ -1584,7 +1584,8 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) ftdi_determine_type(port); ftdi_set_max_packet_size(port); - read_latency_timer(port); + if (read_latency_timer(port) < 0) + priv->latency = 16; create_sysfs_attrs(port); return 0; } -- cgit v0.10.2 From cabe6cc2be287d0020d70944e8d0d0304e484a6c Mon Sep 17 00:00:00 2001 From: Mark Adamson Date: Tue, 24 Nov 2009 09:39:10 +0000 Subject: USB: ftdi_sio: remove support for 5 and 6 data bits Removed CS5 and CS6 from data bits since these are not supported in FTDI hardware. Signed-off-by: Mark J. Adamson Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 9979d49..44c5b77 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -2246,12 +2246,10 @@ static void ftdi_set_termios(struct tty_struct *tty, } if (cflag & CSIZE) { switch (cflag & CSIZE) { - case CS5: urb_value |= 5; dbg("Setting CS5"); break; - case CS6: urb_value |= 6; dbg("Setting CS6"); break; case CS7: urb_value |= 7; dbg("Setting CS7"); break; case CS8: urb_value |= 8; dbg("Setting CS8"); break; default: - dev_err(&port->dev, "CSIZE was set but not CS5-CS8\n"); + dev_err(&port->dev, "CSIZE was set but not CS7-CS8\n"); } } -- cgit v0.10.2 From 2f0e40aba1cafe3a834bfcbac8f1e704d496dab9 Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Wed, 20 Jan 2010 19:43:23 +0100 Subject: USB: fix occasional ULPI timeouts with ehci-mxc On various mxc boards, the intial ULPI reads resulted in a timeout which prevented the transceiver to be identified and thus the ehci device to be probed. Initializing the hardware lines connected to the transceiver (through pdata->init call) before actually enabling clocks and configuring registers in the devices fixes this problem. Signed-off-by: Valentin Longchamp Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index 35c56f4..23cd917 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -162,6 +162,17 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) goto err_ioremap; } + /* call platform specific init function */ + if (pdata->init) { + ret = pdata->init(pdev); + if (ret) { + dev_err(dev, "platform init failed\n"); + goto err_init; + } + /* platforms need some time to settle changed IO settings */ + mdelay(10); + } + /* enable clocks */ priv->usbclk = clk_get(dev, "usb"); if (IS_ERR(priv->usbclk)) { @@ -192,18 +203,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) if (ret < 0) goto err_init; - /* call platform specific init function */ - if (pdata->init) { - ret = pdata->init(pdev); - if (ret) { - dev_err(dev, "platform init failed\n"); - goto err_init; - } - } - - /* most platforms need some time to settle changed IO settings */ - mdelay(10); - /* Initialize the transceiver */ if (pdata->otg) { pdata->otg->io_priv = hcd->regs + ULPI_VIEWPORT_OFFSET; -- cgit v0.10.2 From 4fdb31d9665a9106190d9f8888cf06252c20f3ce Mon Sep 17 00:00:00 2001 From: Enrico Scholz Date: Sun, 11 Oct 2009 11:52:48 +0200 Subject: USB: pxa27x_udc: avoid compiler warnings and misbehavior on buggy hardware hardware reports wrong interrupt. Although such a situation should not happen, the compiler complains about this access. This patch adds a sanity check and generates warning to detect such issues. Signed-off-by: Enrico Scholz Acked-by: Robert Jarzmik Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index adda120..d4c6eec 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -2218,9 +2218,13 @@ static void irq_handle_data(int irq, struct pxa_udc *udc) continue; udc_writel(udc, UDCISR0, UDCISR_INT(i, UDCISR_INT_MASK)); - ep = &udc->pxa_ep[i]; - ep->stats.irqs++; - handle_ep(ep); + + WARN_ON(i >= ARRAY_SIZE(udc->pxa_ep)); + if (i < ARRAY_SIZE(udc->pxa_ep)) { + ep = &udc->pxa_ep[i]; + ep->stats.irqs++; + handle_ep(ep); + } } for (i = 16; udcisr1 != 0 && i < 24; udcisr1 >>= 2, i++) { @@ -2228,9 +2232,12 @@ static void irq_handle_data(int irq, struct pxa_udc *udc) if (!(udcisr1 & UDCISR_INT_MASK)) continue; - ep = &udc->pxa_ep[i]; - ep->stats.irqs++; - handle_ep(ep); + WARN_ON(i >= ARRAY_SIZE(udc->pxa_ep)); + if (i < ARRAY_SIZE(udc->pxa_ep)) { + ep = &udc->pxa_ep[i]; + ep->stats.irqs++; + handle_ep(ep); + } } } -- cgit v0.10.2 From af2ac1a091bc8bee73d7837b73ebfb00b917aece Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Mon, 7 Dec 2009 20:29:05 -0700 Subject: USB: serial mct_usb232: move DMA buffers to heap My distro kernel (Fedora Rawhide) started throwing warnings from DMA API checker, so I have no choice but band-aid it quick. There's no attempt to reuse DMA buffers. Control messages are only sent rarely anyway. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index cd009cb..8650383 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -75,6 +75,7 @@ #include #include #include +#include #include #include #include "mct_u232.h" @@ -231,19 +232,22 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, static int mct_u232_set_baud_rate(struct tty_struct *tty, struct usb_serial *serial, struct usb_serial_port *port, speed_t value) { - __le32 divisor; + unsigned int divisor; int rc; - unsigned char zero_byte = 0; + unsigned char *buf; unsigned char cts_enable_byte = 0; speed_t speed; - divisor = cpu_to_le32(mct_u232_calculate_baud_rate(serial, value, - &speed)); + buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + divisor = mct_u232_calculate_baud_rate(serial, value, &speed); + put_unaligned_le32(cpu_to_le32(divisor), buf); rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), MCT_U232_SET_BAUD_RATE_REQUEST, MCT_U232_SET_REQUEST_TYPE, - 0, 0, &divisor, MCT_U232_SET_BAUD_RATE_SIZE, + 0, 0, buf, MCT_U232_SET_BAUD_RATE_SIZE, WDR_TIMEOUT); if (rc < 0) /*FIXME: What value speed results */ dev_err(&port->dev, "Set BAUD RATE %d failed (error = %d)\n", @@ -269,10 +273,11 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty, a device which is not asserting 'CTS'. */ + buf[0] = 0; rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), MCT_U232_SET_UNKNOWN1_REQUEST, MCT_U232_SET_REQUEST_TYPE, - 0, 0, &zero_byte, MCT_U232_SET_UNKNOWN1_SIZE, + 0, 0, buf, MCT_U232_SET_UNKNOWN1_SIZE, WDR_TIMEOUT); if (rc < 0) dev_err(&port->dev, "Sending USB device request code %d " @@ -284,30 +289,40 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty, dbg("set_baud_rate: send second control message, data = %02X", cts_enable_byte); + buf[0] = cts_enable_byte; rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), MCT_U232_SET_CTS_REQUEST, MCT_U232_SET_REQUEST_TYPE, - 0, 0, &cts_enable_byte, MCT_U232_SET_CTS_SIZE, + 0, 0, buf, MCT_U232_SET_CTS_SIZE, WDR_TIMEOUT); if (rc < 0) dev_err(&port->dev, "Sending USB device request code %d " "failed (error = %d)\n", MCT_U232_SET_CTS_REQUEST, rc); + kfree(buf); return rc; } /* mct_u232_set_baud_rate */ static int mct_u232_set_line_ctrl(struct usb_serial *serial, unsigned char lcr) { int rc; + unsigned char *buf; + + buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + + buf[0] = lcr; rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), MCT_U232_SET_LINE_CTRL_REQUEST, MCT_U232_SET_REQUEST_TYPE, - 0, 0, &lcr, MCT_U232_SET_LINE_CTRL_SIZE, + 0, 0, buf, MCT_U232_SET_LINE_CTRL_SIZE, WDR_TIMEOUT); if (rc < 0) dev_err(&serial->dev->dev, "Set LINE CTRL 0x%x failed (error = %d)\n", lcr, rc); dbg("set_line_ctrl: 0x%x", lcr); + kfree(buf); return rc; } /* mct_u232_set_line_ctrl */ @@ -315,23 +330,31 @@ static int mct_u232_set_modem_ctrl(struct usb_serial *serial, unsigned int control_state) { int rc; - unsigned char mcr = MCT_U232_MCR_NONE; + unsigned char mcr; + unsigned char *buf; + + buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + mcr = MCT_U232_MCR_NONE; if (control_state & TIOCM_DTR) mcr |= MCT_U232_MCR_DTR; if (control_state & TIOCM_RTS) mcr |= MCT_U232_MCR_RTS; + buf[0] = mcr; rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), MCT_U232_SET_MODEM_CTRL_REQUEST, MCT_U232_SET_REQUEST_TYPE, - 0, 0, &mcr, MCT_U232_SET_MODEM_CTRL_SIZE, + 0, 0, buf, MCT_U232_SET_MODEM_CTRL_SIZE, WDR_TIMEOUT); if (rc < 0) dev_err(&serial->dev->dev, "Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc); dbg("set_modem_ctrl: state=0x%x ==> mcr=0x%x", control_state, mcr); + kfree(buf); return rc; } /* mct_u232_set_modem_ctrl */ @@ -339,17 +362,27 @@ static int mct_u232_get_modem_stat(struct usb_serial *serial, unsigned char *msr) { int rc; + unsigned char *buf; + + buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL); + if (buf == NULL) { + *msr = 0; + return -ENOMEM; + } rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), MCT_U232_GET_MODEM_STAT_REQUEST, MCT_U232_GET_REQUEST_TYPE, - 0, 0, msr, MCT_U232_GET_MODEM_STAT_SIZE, + 0, 0, buf, MCT_U232_GET_MODEM_STAT_SIZE, WDR_TIMEOUT); if (rc < 0) { dev_err(&serial->dev->dev, "Get MODEM STATus failed (error = %d)\n", rc); *msr = 0; + } else { + *msr = buf[0]; } dbg("get_modem_stat: 0x%x", *msr); + kfree(buf); return rc; } /* mct_u232_get_modem_stat */ diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h index 07b6bec..7417d5c 100644 --- a/drivers/usb/serial/mct_u232.h +++ b/drivers/usb/serial/mct_u232.h @@ -73,6 +73,8 @@ #define MCT_U232_SET_CTS_REQUEST 12 #define MCT_U232_SET_CTS_SIZE 1 +#define MCT_U232_MAX_SIZE 4 /* of MCT_XXX_SIZE */ + /* * Baud rate (divisor) * Actually, there are two of them, MCT website calls them "Philips solution" -- cgit v0.10.2 From a91b0c502285fd0c569fae1222fdd945ef739233 Mon Sep 17 00:00:00 2001 From: Francesco Lavra Date: Tue, 8 Dec 2009 09:54:11 +0100 Subject: cdc_acm: add reset_resume method Add reset resume logic to the cdc acm driver Signed-off-by: Francesco Lavra Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 34d4eb9..ef2e6f9 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1460,6 +1460,23 @@ err_out: return rv; } +static int acm_reset_resume(struct usb_interface *intf) +{ + struct acm *acm = usb_get_intfdata(intf); + struct tty_struct *tty; + + mutex_lock(&acm->mutex); + if (acm->port.count) { + tty = tty_port_tty_get(&acm->port); + if (tty) { + tty_hangup(tty); + tty_kref_put(tty); + } + } + mutex_unlock(&acm->mutex); + return acm_resume(intf); +} + #endif /* CONFIG_PM */ #define NOKIA_PCSUITE_ACM_INFO(x) \ @@ -1602,6 +1619,7 @@ static struct usb_driver acm_driver = { #ifdef CONFIG_PM .suspend = acm_suspend, .resume = acm_resume, + .reset_resume = acm_reset_resume, #endif .id_table = acm_ids, #ifdef CONFIG_PM -- cgit v0.10.2 From f661c6f8c67bd55e93348f160d590ff9edf08904 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 11 Dec 2009 16:20:20 -0500 Subject: USB: check the endpoint type against the pipe type This patch (as1316) adds some error checking to usb_submit_urb(). It's conditional on CONFIG_USB_DEBUG, so it won't affect normal users. The new check makes sure that the actual type of the endpoint described by urb->pipe agrees with the type encoded in the pipe value. The USB error code documentation is updated to include the code returned by the new check, and the usbfs SUBMITURB handler is updated to use the correct pipe type when legacy user code tries to submit a bulk transfer to an interrupt endpoint. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/usb/error-codes.txt b/Documentation/usb/error-codes.txt index 9cf83e8..d83703e 100644 --- a/Documentation/usb/error-codes.txt +++ b/Documentation/usb/error-codes.txt @@ -41,8 +41,8 @@ USB-specific: -EFBIG Host controller driver can't schedule that many ISO frames. --EPIPE Specified endpoint is stalled. For non-control endpoints, - reset this status with usb_clear_halt(). +-EPIPE The pipe type specified in the URB doesn't match the + endpoint's actual type. -EMSGSIZE (a) endpoint maxpacket size is zero; it is not usable in the current interface altsetting. @@ -60,6 +60,8 @@ USB-specific: -EHOSTUNREACH URB was rejected because the device is suspended. +-ENOEXEC A control URB doesn't contain a Setup packet. + ************************************************************************** * Error codes returned by in urb->status * diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index a678186..431d172 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1104,13 +1104,25 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, case USB_ENDPOINT_XFER_CONTROL: case USB_ENDPOINT_XFER_ISOC: return -EINVAL; - /* allow single-shot interrupt transfers, at bogus rates */ + case USB_ENDPOINT_XFER_INT: + /* allow single-shot interrupt transfers */ + uurb->type = USBDEVFS_URB_TYPE_INTERRUPT; + goto interrupt_urb; } uurb->number_of_packets = 0; if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE) return -EINVAL; break; + case USBDEVFS_URB_TYPE_INTERRUPT: + if (!usb_endpoint_xfer_int(&ep->desc)) + return -EINVAL; + interrupt_urb: + uurb->number_of_packets = 0; + if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE) + return -EINVAL; + break; + case USBDEVFS_URB_TYPE_ISO: /* arbitrary limit */ if (uurb->number_of_packets < 1 || @@ -1143,14 +1155,6 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, uurb->buffer_length = totlen; break; - case USBDEVFS_URB_TYPE_INTERRUPT: - uurb->number_of_packets = 0; - if (!usb_endpoint_xfer_int(&ep->desc)) - return -EINVAL; - if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE) - return -EINVAL; - break; - default: return -EINVAL; } diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index e7cae13..e2bd153 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -387,6 +387,13 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) { unsigned int orig_flags = urb->transfer_flags; unsigned int allowed; + static int pipetypes[4] = { + PIPE_CONTROL, PIPE_ISOCHRONOUS, PIPE_BULK, PIPE_INTERRUPT + }; + + /* Check that the pipe's type matches the endpoint's type */ + if (usb_pipetype(urb->pipe) != pipetypes[xfertype]) + return -EPIPE; /* The most suitable error code :-) */ /* enforce simple/standard policy */ allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP | -- cgit v0.10.2 From c01591bd6ece72e1c099cbc25ed812e1add579dc Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Wed, 9 Dec 2009 15:58:58 -0800 Subject: USB: xhci: Fix error path when configuring endpoints. If we fail to queue an evaluate context command or a configure endpoint command to the command ring in xhci_configure_endpoint(), we need to remove the xhci_command structure from the device's command list before returning. If the command is left on the command list, it will sit there indefinitely, blocking commands submitted after this fails. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c index 5e92c72..0c5c1b2 100644 --- a/drivers/usb/host/xhci-hcd.c +++ b/drivers/usb/host/xhci-hcd.c @@ -1181,6 +1181,8 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, ret = xhci_queue_evaluate_context(xhci, in_ctx->dma, udev->slot_id); if (ret < 0) { + if (command) + list_del(&command->cmd_list); spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg(xhci, "FIXME allocate a new ring segment\n"); return -ENOMEM; -- cgit v0.10.2 From 412566bd716397e28e81fc9b20804bc6a6daf14d Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Wed, 9 Dec 2009 15:59:01 -0800 Subject: USB: xhci: Refactor code to free or cache endpoint rings. Refactor out the code to cache or free endpoint rings from recently dropped or disabled endpoints. This code will be used by a new function to reset a device and disable all endpoints except control endpoint 0. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c index 0c5c1b2..451f53e 100644 --- a/drivers/usb/host/xhci-hcd.c +++ b/drivers/usb/host/xhci-hcd.c @@ -1266,30 +1266,13 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) xhci_zero_in_ctx(xhci, virt_dev); /* Install new rings and free or cache any old rings */ for (i = 1; i < 31; ++i) { - int rings_cached; - if (!virt_dev->eps[i].new_ring) continue; /* Only cache or free the old ring if it exists. * It may not if this is the first add of an endpoint. */ if (virt_dev->eps[i].ring) { - rings_cached = virt_dev->num_rings_cached; - if (rings_cached < XHCI_MAX_RINGS_CACHED) { - virt_dev->num_rings_cached++; - rings_cached = virt_dev->num_rings_cached; - virt_dev->ring_cache[rings_cached] = - virt_dev->eps[i].ring; - xhci_dbg(xhci, "Cached old ring, " - "%d ring%s cached\n", - rings_cached, - (rings_cached > 1) ? "s" : ""); - } else { - xhci_ring_free(xhci, virt_dev->eps[i].ring); - xhci_dbg(xhci, "Ring cache full (%d rings), " - "freeing ring\n", - virt_dev->num_rings_cached); - } + xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i); } virt_dev->eps[i].ring = virt_dev->eps[i].new_ring; virt_dev->eps[i].new_ring = NULL; diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index bffcef7..1f1f8a0 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -198,6 +198,31 @@ fail: return 0; } +void xhci_free_or_cache_endpoint_ring(struct xhci_hcd *xhci, + struct xhci_virt_device *virt_dev, + unsigned int ep_index) +{ + int rings_cached; + + rings_cached = virt_dev->num_rings_cached; + if (rings_cached < XHCI_MAX_RINGS_CACHED) { + virt_dev->num_rings_cached++; + rings_cached = virt_dev->num_rings_cached; + virt_dev->ring_cache[rings_cached] = + virt_dev->eps[ep_index].ring; + xhci_dbg(xhci, "Cached old ring, " + "%d ring%s cached\n", + rings_cached, + (rings_cached > 1) ? "s" : ""); + } else { + xhci_ring_free(xhci, virt_dev->eps[ep_index].ring); + xhci_dbg(xhci, "Ring cache full (%d rings), " + "freeing ring\n", + virt_dev->num_rings_cached); + } + virt_dev->eps[ep_index].ring = NULL; +} + /* Zero an endpoint ring (except for link TRBs) and move the enqueue and dequeue * pointers to the beginning of the ring. */ diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 8778135..61747f3 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1233,6 +1233,9 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_device *udev, struct usb_host_endpoint *ep, gfp_t mem_flags); void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring); +void xhci_free_or_cache_endpoint_ring(struct xhci_hcd *xhci, + struct xhci_virt_device *virt_dev, + unsigned int ep_index); struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci, bool allocate_completion, gfp_t mem_flags); void xhci_free_command(struct xhci_hcd *xhci, -- cgit v0.10.2 From a1d78c16bd31a715785e21967ac6110b386a3c1f Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Wed, 9 Dec 2009 15:59:03 -0800 Subject: USB: xhci: Allow allocation of commands without input contexts. The xhci_command structure is the basic structure for issuing commands to the xHCI hardware. It contains a struct completion (so that the issuing function can wait on the command), command status, and a input context that is used to pass information to the hardware. Not all commands need the input context, so make it optional to allocate. Allow xhci_free_container_ctx() to be passed a NULL input context, to make freeing the xhci_command structure simple. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c index 451f53e..17f1caf 100644 --- a/drivers/usb/host/xhci-hcd.c +++ b/drivers/usb/host/xhci-hcd.c @@ -1679,7 +1679,7 @@ int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, xhci_warn(xhci, "Cannot update hub desc for unknown device.\n"); return -EINVAL; } - config_cmd = xhci_alloc_command(xhci, true, mem_flags); + config_cmd = xhci_alloc_command(xhci, true, true, mem_flags); if (!config_cmd) { xhci_dbg(xhci, "Could not allocate xHCI command structure.\n"); return -ENOMEM; diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 1f1f8a0..8045bc6 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -267,6 +267,8 @@ struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci, void xhci_free_container_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx) { + if (!ctx) + return; dma_pool_free(xhci->device_pool, ctx->bytes, ctx->dma); kfree(ctx); } @@ -844,7 +846,8 @@ static void scratchpad_free(struct xhci_hcd *xhci) } struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci, - bool allocate_completion, gfp_t mem_flags) + bool allocate_in_ctx, bool allocate_completion, + gfp_t mem_flags) { struct xhci_command *command; @@ -852,11 +855,14 @@ struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci, if (!command) return NULL; - command->in_ctx = - xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_INPUT, mem_flags); - if (!command->in_ctx) { - kfree(command); - return NULL; + if (allocate_in_ctx) { + command->in_ctx = + xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_INPUT, + mem_flags); + if (!command->in_ctx) { + kfree(command); + return NULL; + } } if (allocate_completion) { diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 61747f3..902be96 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1237,7 +1237,8 @@ void xhci_free_or_cache_endpoint_ring(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, unsigned int ep_index); struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci, - bool allocate_completion, gfp_t mem_flags); + bool allocate_in_ctx, bool allocate_completion, + gfp_t mem_flags); void xhci_free_command(struct xhci_hcd *xhci, struct xhci_command *command); -- cgit v0.10.2 From b45b506911247008f694dcaf1d8220a4942ebc4f Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Wed, 9 Dec 2009 15:59:06 -0800 Subject: USB: xhci: Refactor test for vendor-specific completion codes. All commands that can be issued to the xHCI hardware can come back with vendor-specific "informational" completion codes. These are to be treated like a successful completion code. Refactor out the code to test for the range of these codes and print debugging messages. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index ee7bc7e..f43e073 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1080,6 +1080,20 @@ static int xhci_requires_manual_halt_cleanup(struct xhci_hcd *xhci, return 0; } +int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code) +{ + if (trb_comp_code >= 224 && trb_comp_code <= 255) { + /* Vendor defined "informational" completion code, + * treat as not-an-error. + */ + xhci_dbg(xhci, "Vendor defined info completion code %u\n", + trb_comp_code); + xhci_dbg(xhci, "Treating code as success.\n"); + return 1; + } + return 0; +} + /* * If this function returns an error condition, it means it got a Transfer * event with a corrupted Slot ID, Endpoint ID, or TRB DMA address. @@ -1196,13 +1210,7 @@ static int handle_tx_event(struct xhci_hcd *xhci, status = -ENOSR; break; default: - if (trb_comp_code >= 224 && trb_comp_code <= 255) { - /* Vendor defined "informational" completion code, - * treat as not-an-error. - */ - xhci_dbg(xhci, "Vendor defined info completion code %u\n", - trb_comp_code); - xhci_dbg(xhci, "Treating code as success.\n"); + if (xhci_is_vendor_info_code(xhci, trb_comp_code)) { status = 0; break; } diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 902be96..20122ec 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1276,6 +1276,7 @@ dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg, union xhci_trb *trb); struct xhci_segment *trb_in_td(struct xhci_segment *start_seg, union xhci_trb *start_trb, union xhci_trb *end_trb, dma_addr_t suspect_dma); +int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code); void xhci_ring_cmd_db(struct xhci_hcd *xhci); void *xhci_setup_one_noop(struct xhci_hcd *xhci); void xhci_handle_event(struct xhci_hcd *xhci); -- cgit v0.10.2 From 34fb562a436ca50e13c05e7584c9d62f151052bf Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Wed, 9 Dec 2009 15:59:08 -0800 Subject: USB: xhci: Refactor code to clear port change bits. Refactor the code to clear the port change bits in the port status register. All port status change bits are write one to clear. Remove a redundant port status read that was supposed to unblock any posted writes. We read the port after the write to get the updated status for debugging, so the port read after that is unnecessary. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index eac5b53..5850e8b 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -129,6 +129,36 @@ static u32 xhci_port_state_to_neutral(u32 state) return (state & XHCI_PORT_RO) | (state & XHCI_PORT_RWS); } +static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue, + u16 wIndex, u32 __iomem *addr, u32 port_status) +{ + char *port_change_bit; + u32 status; + + switch (wValue) { + case USB_PORT_FEAT_C_RESET: + status = PORT_RC; + port_change_bit = "reset"; + break; + case USB_PORT_FEAT_C_CONNECTION: + status = PORT_CSC; + port_change_bit = "connect"; + break; + case USB_PORT_FEAT_C_OVER_CURRENT: + status = PORT_OCC; + port_change_bit = "over-current"; + break; + default: + /* Should never happen */ + return; + } + /* Change bits are all write 1 to clear */ + xhci_writel(xhci, port_status | status, addr); + port_status = xhci_readl(xhci, addr); + xhci_dbg(xhci, "clear port %s change, actual port %d status = 0x%x\n", + port_change_bit, wIndex, port_status); +} + int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength) { @@ -138,7 +168,6 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u32 temp, status; int retval = 0; u32 __iomem *addr; - char *port_change_bit; ports = HCS_MAX_PORTS(xhci->hcs_params1); @@ -229,26 +258,14 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, temp = xhci_port_state_to_neutral(temp); switch (wValue) { case USB_PORT_FEAT_C_RESET: - status = PORT_RC; - port_change_bit = "reset"; - break; case USB_PORT_FEAT_C_CONNECTION: - status = PORT_CSC; - port_change_bit = "connect"; - break; case USB_PORT_FEAT_C_OVER_CURRENT: - status = PORT_OCC; - port_change_bit = "over-current"; + xhci_clear_port_change_bit(xhci, wValue, wIndex, + addr, temp); break; default: goto error; } - /* Change bits are all write 1 to clear */ - xhci_writel(xhci, temp | status, addr); - temp = xhci_readl(xhci, addr); - xhci_dbg(xhci, "clear port %s change, actual port %d status = 0x%x\n", - port_change_bit, wIndex, temp); - temp = xhci_readl(xhci, addr); /* unblock any posted writes */ break; default: error: -- cgit v0.10.2 From 6219c047d3fe18dee4916d6898fc94f5a7ffd156 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Wed, 9 Dec 2009 15:59:11 -0800 Subject: USB: xhci: Allow roothub ports to be disabled. Add the hub emulation code to allow ports on an xHCI root hub to be disabled. Add the code to clear the port enabled/disabled bit, and clear the port enabled/disabled change bit. Like EHCI, the port cannot be enabled by setting the port enabled/disabled bit. Instead, a port is enabled by the host controller after a reset. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 5850e8b..208b805 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -129,6 +129,16 @@ static u32 xhci_port_state_to_neutral(u32 state) return (state & XHCI_PORT_RO) | (state & XHCI_PORT_RWS); } +static void xhci_disable_port(struct xhci_hcd *xhci, u16 wIndex, + u32 __iomem *addr, u32 port_status) +{ + /* Write 1 to disable the port */ + xhci_writel(xhci, port_status | PORT_PE, addr); + port_status = xhci_readl(xhci, addr); + xhci_dbg(xhci, "disable port, actual port %d status = 0x%x\n", + wIndex, port_status); +} + static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue, u16 wIndex, u32 __iomem *addr, u32 port_status) { @@ -148,6 +158,10 @@ static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue, status = PORT_OCC; port_change_bit = "over-current"; break; + case USB_PORT_FEAT_C_ENABLE: + status = PORT_PEC; + port_change_bit = "enable/disable"; + break; default: /* Should never happen */ return; @@ -260,9 +274,13 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, case USB_PORT_FEAT_C_RESET: case USB_PORT_FEAT_C_CONNECTION: case USB_PORT_FEAT_C_OVER_CURRENT: + case USB_PORT_FEAT_C_ENABLE: xhci_clear_port_change_bit(xhci, wValue, wIndex, addr, temp); break; + case USB_PORT_FEAT_ENABLE: + xhci_disable_port(xhci, wIndex, addr, temp); + break; default: goto error; } -- cgit v0.10.2 From 2a8f82c4ceaffcfd64531dbdee1d1bc227387882 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Wed, 9 Dec 2009 15:59:13 -0800 Subject: USB: xhci: Notify the xHC when a device is reset. When a USB device is reset, the xHCI hardware must know, in order to match the device state and disable all endpoints except control endpoint 0. Issue a Reset Device command after a USB device is successfully reset. Wait on the command to finish, and then cache or free the disabled endpoint rings. There are four different USB device states that the xHCI hardware tracks: - disabled/enabled - device connection has just been detected, - default - the device has been reset and has an address of 0, - addressed - the device has a non-zero address but no configuration has been set, - configured - a set configuration succeeded. The USB core may issue a port reset when a device is in any state, but the Reset Device command will fail for a 0.96 xHC if the device is not in the addressed or configured state. Don't consider this failure as an error, but don't free any endpoint rings if this command fails. A storage driver may request that the USB device be reset during error handling, so use GPF_NOIO instead of GPF_KERNEL while allocating memory for the Reset Device command. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index 33128d5..b2915ae 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -406,6 +406,25 @@ static void dbg_rsvd64(struct xhci_hcd *xhci, u64 *ctx, dma_addr_t dma) } } +inline char *xhci_get_slot_state(struct xhci_hcd *xhci, + struct xhci_container_ctx *ctx) +{ + struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx); + + switch (GET_SLOT_STATE(slot_ctx->dev_state)) { + case 0: + return "enabled/disabled"; + case 1: + return "default"; + case 2: + return "addressed"; + case 3: + return "configured"; + default: + return "reserved"; + } +} + void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx) { /* Fields are 32 bits wide, DMA addresses are in bytes */ diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c index 17f1caf..c8573f8 100644 --- a/drivers/usb/host/xhci-hcd.c +++ b/drivers/usb/host/xhci-hcd.c @@ -1443,6 +1443,131 @@ void xhci_endpoint_reset(struct usb_hcd *hcd, } /* + * This submits a Reset Device Command, which will set the device state to 0, + * set the device address to 0, and disable all the endpoints except the default + * control endpoint. The USB core should come back and call + * xhci_address_device(), and then re-set up the configuration. If this is + * called because of a usb_reset_and_verify_device(), then the old alternate + * settings will be re-installed through the normal bandwidth allocation + * functions. + * + * Wait for the Reset Device command to finish. Remove all structures + * associated with the endpoints that were disabled. Clear the input device + * structure? Cache the rings? Reset the control endpoint 0 max packet size? + */ +int xhci_reset_device(struct usb_hcd *hcd, struct usb_device *udev) +{ + int ret, i; + unsigned long flags; + struct xhci_hcd *xhci; + unsigned int slot_id; + struct xhci_virt_device *virt_dev; + struct xhci_command *reset_device_cmd; + int timeleft; + int last_freed_endpoint; + + ret = xhci_check_args(hcd, udev, NULL, 0, __func__); + if (ret <= 0) + return ret; + xhci = hcd_to_xhci(hcd); + slot_id = udev->slot_id; + virt_dev = xhci->devs[slot_id]; + if (!virt_dev) { + xhci_dbg(xhci, "%s called with invalid slot ID %u\n", + __func__, slot_id); + return -EINVAL; + } + + xhci_dbg(xhci, "Resetting device with slot ID %u\n", slot_id); + /* Allocate the command structure that holds the struct completion. + * Assume we're in process context, since the normal device reset + * process has to wait for the device anyway. Storage devices are + * reset as part of error handling, so use GFP_NOIO instead of + * GFP_KERNEL. + */ + reset_device_cmd = xhci_alloc_command(xhci, false, true, GFP_NOIO); + if (!reset_device_cmd) { + xhci_dbg(xhci, "Couldn't allocate command structure.\n"); + return -ENOMEM; + } + + /* Attempt to submit the Reset Device command to the command ring */ + spin_lock_irqsave(&xhci->lock, flags); + reset_device_cmd->command_trb = xhci->cmd_ring->enqueue; + list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list); + ret = xhci_queue_reset_device(xhci, slot_id); + if (ret) { + xhci_dbg(xhci, "FIXME: allocate a command ring segment\n"); + list_del(&reset_device_cmd->cmd_list); + spin_unlock_irqrestore(&xhci->lock, flags); + goto command_cleanup; + } + xhci_ring_cmd_db(xhci); + spin_unlock_irqrestore(&xhci->lock, flags); + + /* Wait for the Reset Device command to finish */ + timeleft = wait_for_completion_interruptible_timeout( + reset_device_cmd->completion, + USB_CTRL_SET_TIMEOUT); + if (timeleft <= 0) { + xhci_warn(xhci, "%s while waiting for reset device command\n", + timeleft == 0 ? "Timeout" : "Signal"); + spin_lock_irqsave(&xhci->lock, flags); + /* The timeout might have raced with the event ring handler, so + * only delete from the list if the item isn't poisoned. + */ + if (reset_device_cmd->cmd_list.next != LIST_POISON1) + list_del(&reset_device_cmd->cmd_list); + spin_unlock_irqrestore(&xhci->lock, flags); + ret = -ETIME; + goto command_cleanup; + } + + /* The Reset Device command can't fail, according to the 0.95/0.96 spec, + * unless we tried to reset a slot ID that wasn't enabled, + * or the device wasn't in the addressed or configured state. + */ + ret = reset_device_cmd->status; + switch (ret) { + case COMP_EBADSLT: /* 0.95 completion code for bad slot ID */ + case COMP_CTX_STATE: /* 0.96 completion code for same thing */ + xhci_info(xhci, "Can't reset device (slot ID %u) in %s state\n", + slot_id, + xhci_get_slot_state(xhci, virt_dev->out_ctx)); + xhci_info(xhci, "Not freeing device rings.\n"); + /* Don't treat this as an error. May change my mind later. */ + ret = 0; + goto command_cleanup; + case COMP_SUCCESS: + xhci_dbg(xhci, "Successful reset device command.\n"); + break; + default: + if (xhci_is_vendor_info_code(xhci, ret)) + break; + xhci_warn(xhci, "Unknown completion code %u for " + "reset device command.\n", ret); + ret = -EINVAL; + goto command_cleanup; + } + + /* Everything but endpoint 0 is disabled, so free or cache the rings. */ + last_freed_endpoint = 1; + for (i = 1; i < 31; ++i) { + if (!virt_dev->eps[i].ring) + continue; + xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i); + last_freed_endpoint = i; + } + xhci_dbg(xhci, "Output context after successful reset device cmd:\n"); + xhci_dbg_ctx(xhci, virt_dev->out_ctx, last_freed_endpoint); + ret = 0; + +command_cleanup: + xhci_free_command(xhci, reset_device_cmd); + return ret; +} + +/* * At this point, the struct usb_device is about to go away, the device has * disconnected, and all traffic has been stopped and the endpoints have been * disabled. Free any HC data structures associated with that device. diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index f43e073..6ba841b 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -953,6 +953,17 @@ bandwidth_change: case TRB_TYPE(TRB_RESET_EP): handle_reset_ep_completion(xhci, event, xhci->cmd_ring->dequeue); break; + case TRB_TYPE(TRB_RESET_DEV): + xhci_dbg(xhci, "Completed reset device command.\n"); + slot_id = TRB_TO_SLOT_ID( + xhci->cmd_ring->dequeue->generic.field[3]); + virt_dev = xhci->devs[slot_id]; + if (virt_dev) + handle_cmd_in_cmd_wait_list(xhci, virt_dev, event); + else + xhci_warn(xhci, "Reset device command completion " + "for disabled slot %u\n", slot_id); + break; default: /* Skip over unknown commands on the event ring */ xhci->error_bitmask |= 1 << 6; @@ -2189,6 +2200,14 @@ int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, false); } +/* Queue a reset device command TRB */ +int xhci_queue_reset_device(struct xhci_hcd *xhci, u32 slot_id) +{ + return queue_command(xhci, 0, 0, 0, + TRB_TYPE(TRB_RESET_DEV) | SLOT_ID_FOR_TRB(slot_id), + false); +} + /* Queue a configure endpoint command TRB */ int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, u32 slot_id, bool command_must_succeed) diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 20122ec..feb0101 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1210,6 +1210,8 @@ void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst); void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci); void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring); void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int last_ep); +inline char *xhci_get_slot_state(struct xhci_hcd *xhci, + struct xhci_container_ctx *ctx); /* xHCI memory management */ void xhci_mem_cleanup(struct xhci_hcd *xhci); @@ -1298,6 +1300,7 @@ int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, u32 slot_id); int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id, unsigned int ep_index); +int xhci_queue_reset_device(struct xhci_hcd *xhci, u32 slot_id); void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, struct xhci_td *cur_td, struct xhci_dequeue_state *state); -- cgit v0.10.2 From a5f0efaba4c2b644e6248648f75b0a8a522359f6 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Wed, 9 Dec 2009 15:59:17 -0800 Subject: USB: Add call to notify xHC of a device reset. Add a new host controller driver method, reset_device(), that the USB core will use to notify the host of a successful device reset. The call may fail due to out-of-memory errors; attempt the port reset sequence again if that happens. Update hub_port_init() to allow resetting a configured device. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index bbe2b92..70a7e49 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -286,6 +286,7 @@ struct hc_driver { */ int (*update_hub_device)(struct usb_hcd *, struct usb_device *hdev, struct usb_tt *tt, gfp_t mem_flags); + int (*reset_device)(struct usb_hcd *, struct usb_device *); }; extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 20ecb4c..bb416cd 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2008,7 +2008,9 @@ static int hub_port_reset(struct usb_hub *hub, int port1, struct usb_device *udev, unsigned int delay) { int i, status; + struct usb_hcd *hcd; + hcd = bus_to_hcd(udev->bus); /* Block EHCI CF initialization during the port reset. * Some companion controllers don't like it when they mix. */ @@ -2036,6 +2038,14 @@ static int hub_port_reset(struct usb_hub *hub, int port1, /* TRSTRCY = 10 ms; plus some extra */ msleep(10 + 40); update_address(udev, 0); + if (hcd->driver->reset_device) { + status = hcd->driver->reset_device(hcd, udev); + if (status < 0) { + dev_err(&udev->dev, "Cannot reset " + "HCD device state\n"); + break; + } + } /* FALL THROUGH */ case -ENOTCONN: case -ENODEV: @@ -2645,14 +2655,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, mutex_lock(&usb_address0_mutex); - if ((hcd->driver->flags & HCD_USB3) && udev->config) { - /* FIXME this will need special handling by the xHCI driver. */ - dev_dbg(&udev->dev, - "xHCI reset of configured device " - "not supported yet.\n"); - retval = -EINVAL; - goto fail; - } else if (!udev->config && oldspeed == USB_SPEED_SUPER) { + if (!udev->config && oldspeed == USB_SPEED_SUPER) { /* Don't reset USB 3.0 devices during an initial setup */ usb_set_device_state(udev, USB_STATE_DEFAULT); } else { diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index e097008..417d37a 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -139,6 +139,7 @@ static const struct hc_driver xhci_pci_hc_driver = { .reset_bandwidth = xhci_reset_bandwidth, .address_device = xhci_address_device, .update_hub_device = xhci_update_hub_device, + .reset_device = xhci_reset_device, /* * scheduling support diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index feb0101..741ece4 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1270,6 +1270,7 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status); int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep); int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep); void xhci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep); +int xhci_reset_device(struct usb_hcd *hcd, struct usb_device *udev); int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev); void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev); -- cgit v0.10.2 From d63c66d2d08f52487f3ef32f1c9b1231d848966b Mon Sep 17 00:00:00 2001 From: Dmitri Epshtein Date: Mon, 14 Dec 2009 17:17:33 +0200 Subject: USB: ehci: add call of free_cached_itd_list() function in disable_periodic() Sometimes disable_periodic() stop scan_periodic before than free_cached_itd_list() was called. In such case USB Host stacked during disconnect operation Solution: add call of free_cached_itd_list() function in disable_periodic() Signed-off-by: Dimitry Epshtein Signed-off-by: Saeed Bishara Cc: David Brownell Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index 1e391e6..e7a3b08 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -510,6 +510,8 @@ static int disable_periodic (struct ehci_hcd *ehci) ehci_writel(ehci, cmd, &ehci->regs->command); /* posted write ... */ + free_cached_itd_list(ehci); + ehci->next_uframe = -1; return 0; } -- cgit v0.10.2 From 22e186948a262c9cd377fb43aa50bb3c3f01c468 Mon Sep 17 00:00:00 2001 From: Dmitri Epshtein Date: Mon, 14 Dec 2009 17:17:34 +0200 Subject: USB: ehci: fix audio record functionality for some Full speed sound blaster devices This patch fix audio record functionality for some Full speed sound blaster devices. Issue: Sometimes transaction complete indication is coming from HW one frame later. Solution: If scan_periodic process now frame or previous frame now-1 and sitd transaction is not finished yet, exit scan_periodic function and check the same transaction in the next frame. Signed-off-by: Dimitry Epshtein Signed-off-by: Saeed Bishara Cc: David Brownell Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index e7a3b08..39340ae 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -2324,9 +2324,13 @@ restart: * No need to check for activity unless the * frame is current. */ - if (frame == clock_frame && live && - (q.sitd->hw_results & - SITD_ACTIVE(ehci))) { + if (((frame == clock_frame) || + (((frame + 1) % ehci->periodic_size) + == clock_frame)) + && live + && (q.sitd->hw_results & + SITD_ACTIVE(ehci))) { + incomplete = true; q_p = &q.sitd->sitd_next; hw_p = &q.sitd->hw_next; -- cgit v0.10.2 From dad3843f035a273f9b64e133467e8dcbfaf0ce60 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Mon, 14 Dec 2009 18:41:05 +0300 Subject: USB: ehci-fsl: Fix sparse warnings This patch fixes following warnings: ehci-fsl.c:43:5: warning: symbol 'usb_hcd_fsl_probe' was not declared. Should it be static? ehci-fsl.c:150:6: warning: symbol 'usb_hcd_fsl_remove' was not declared. Should it be static? Signed-off-by: Anton Vorontsov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 9911749..593a7e7 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -40,8 +40,8 @@ * Allocates basic resources for this USB host controller. * */ -int usb_hcd_fsl_probe(const struct hc_driver *driver, - struct platform_device *pdev) +static int usb_hcd_fsl_probe(const struct hc_driver *driver, + struct platform_device *pdev) { struct fsl_usb2_platform_data *pdata; struct usb_hcd *hcd; @@ -147,7 +147,8 @@ int usb_hcd_fsl_probe(const struct hc_driver *driver, * Reverses the effect of usb_hcd_fsl_probe(). * */ -void usb_hcd_fsl_remove(struct usb_hcd *hcd, struct platform_device *pdev) +static void usb_hcd_fsl_remove(struct usb_hcd *hcd, + struct platform_device *pdev) { usb_remove_hcd(hcd); iounmap(hcd->regs); -- cgit v0.10.2 From 1af107744253b01b4cf119a9bb3369376b01658b Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Mon, 14 Dec 2009 18:41:12 +0300 Subject: USB: ehci-fsl: Add power management support EHCI FSL controller preserve its state during sleep mode, so nothing fancy needs to be done. Though, during 'deep sleep' mode (as found in MPC831x CPUs) the controller turns off and needs to be reinitialized upon resume. This patch adds support for hibernation and resuming after deep sleep. Based on Dave Liu and Jerry Huang's work[1]. [1] http://www.bitshrine.org/gpp/linux-fsl-2.6.24.3-MPC8315ERDB-usb-power-mangement.patch Signed-off-by: Anton Vorontsov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 593a7e7..0e26aa1 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -1,5 +1,6 @@ /* - * Copyright (c) 2005 MontaVista Software + * Copyright 2005-2009 MontaVista Software, Inc. + * Copyright 2008 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -17,17 +18,20 @@ * * Ported to 834x by Randy Vinson using code provided * by Hunter Wu. + * Power Management support by Dave Liu , + * Jerry Huang and + * Anton Vorontsov . */ +#include +#include +#include +#include #include #include #include "ehci-fsl.h" -/* FIXME: Power Management is un-ported so temporarily disable it */ -#undef CONFIG_PM - - /* configure so an HC device and id are always provided */ /* always called with process context; sleeping is OK */ @@ -285,10 +289,81 @@ static int ehci_fsl_setup(struct usb_hcd *hcd) return retval; } +struct ehci_fsl { + struct ehci_hcd ehci; + +#ifdef CONFIG_PM + /* Saved USB PHY settings, need to restore after deep sleep. */ + u32 usb_ctrl; +#endif +}; + +#ifdef CONFIG_PM + +static struct ehci_fsl *hcd_to_ehci_fsl(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + + return container_of(ehci, struct ehci_fsl, ehci); +} + +static int ehci_fsl_drv_suspend(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd); + void __iomem *non_ehci = hcd->regs; + + if (!fsl_deep_sleep()) + return 0; + + ehci_fsl->usb_ctrl = in_be32(non_ehci + FSL_SOC_USB_CTRL); + return 0; +} + +static int ehci_fsl_drv_resume(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + void __iomem *non_ehci = hcd->regs; + + if (!fsl_deep_sleep()) + return 0; + + usb_root_hub_lost_power(hcd->self.root_hub); + + /* Restore USB PHY settings and enable the controller. */ + out_be32(non_ehci + FSL_SOC_USB_CTRL, ehci_fsl->usb_ctrl); + + ehci_reset(ehci); + ehci_fsl_reinit(ehci); + + return 0; +} + +static int ehci_fsl_drv_restore(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + + usb_root_hub_lost_power(hcd->self.root_hub); + return 0; +} + +static struct dev_pm_ops ehci_fsl_pm_ops = { + .suspend = ehci_fsl_drv_suspend, + .resume = ehci_fsl_drv_resume, + .restore = ehci_fsl_drv_restore, +}; + +#define EHCI_FSL_PM_OPS (&ehci_fsl_pm_ops) +#else +#define EHCI_FSL_PM_OPS NULL +#endif /* CONFIG_PM */ + static const struct hc_driver ehci_fsl_hc_driver = { .description = hcd_name, .product_desc = "Freescale On-Chip EHCI Host Controller", - .hcd_priv_size = sizeof(struct ehci_hcd), + .hcd_priv_size = sizeof(struct ehci_fsl), /* * generic hardware linkage @@ -355,6 +430,7 @@ static struct platform_driver ehci_fsl_driver = { .remove = ehci_fsl_drv_remove, .shutdown = usb_hcd_platform_shutdown, .driver = { - .name = "fsl-ehci", + .name = "fsl-ehci", + .pm = EHCI_FSL_PM_OPS, }, }; -- cgit v0.10.2 From 5c90e314a62f09bf4dda4ec5cf50b904540ffa34 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Mon, 14 Dec 2009 18:05:02 -0500 Subject: USB: pxa27x_udc.c: use resource_size() Use resource_size(). Signed-off-by: H Hartley Sweeten Cc: David Brownell Acked-by: Robert Jarzmik Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index d4c6eec..e8b4b69 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -2446,7 +2446,7 @@ static int __init pxa_udc_probe(struct platform_device *pdev) } retval = -ENOMEM; - udc->regs = ioremap(regs->start, regs->end - regs->start + 1); + udc->regs = ioremap(regs->start, resource_size(regs)); if (!udc->regs) { dev_err(&pdev->dev, "Unable to map UDC I/O memory\n"); goto err_map; -- cgit v0.10.2 From 3ba37bdaef3bea9fa166eae6051949d629e7ea83 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Mon, 14 Dec 2009 18:04:49 -0500 Subject: USB: atmel_usba_udc.c: use resource_size() Use resource_size(). Signed-off-by: H Hartley Sweeten Cc: David Brownell Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index 4e970cf..976822f 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -1914,14 +1914,14 @@ static int __init usba_udc_probe(struct platform_device *pdev) udc->vbus_pin = -ENODEV; ret = -ENOMEM; - udc->regs = ioremap(regs->start, regs->end - regs->start + 1); + udc->regs = ioremap(regs->start, resource_size(regs)); if (!udc->regs) { dev_err(&pdev->dev, "Unable to map I/O memory, aborting.\n"); goto err_map_regs; } dev_info(&pdev->dev, "MMIO registers at 0x%08lx mapped at %p\n", (unsigned long)regs->start, udc->regs); - udc->fifo = ioremap(fifo->start, fifo->end - fifo->start + 1); + udc->fifo = ioremap(fifo->start, resource_size(fifo)); if (!udc->fifo) { dev_err(&pdev->dev, "Unable to map FIFO, aborting.\n"); goto err_map_fifo; -- cgit v0.10.2 From d8bb0fd26b555f505019b9b68b6d581fb9f80348 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Mon, 14 Dec 2009 17:59:22 -0500 Subject: USB: at91_udc.c: use resource_size() Use resource_size(). Signed-off-by: H Hartley Sweeten Cc: David Brownell Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 043e04d..12ac9cd 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -1656,9 +1656,7 @@ static int __init at91udc_probe(struct platform_device *pdev) if (!res) return -ENXIO; - if (!request_mem_region(res->start, - res->end - res->start + 1, - driver_name)) { + if (!request_mem_region(res->start, resource_size(res), driver_name)) { DBG("someone's using UDC memory\n"); return -EBUSY; } @@ -1699,7 +1697,7 @@ static int __init at91udc_probe(struct platform_device *pdev) udc->ep[3].maxpacket = 64; } - udc->udp_baseaddr = ioremap(res->start, res->end - res->start + 1); + udc->udp_baseaddr = ioremap(res->start, resource_size(res)); if (!udc->udp_baseaddr) { retval = -ENOMEM; goto fail0a; @@ -1781,7 +1779,7 @@ fail0a: if (cpu_is_at91rm9200()) gpio_free(udc->board.pullup_pin); fail0: - release_mem_region(res->start, res->end - res->start + 1); + release_mem_region(res->start, resource_size(res)); DBG("%s probe failed, %d\n", driver_name, retval); return retval; } @@ -1813,7 +1811,7 @@ static int __exit at91udc_remove(struct platform_device *pdev) gpio_free(udc->board.pullup_pin); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, res->end - res->start + 1); + release_mem_region(res->start, resource_size(res)); clk_put(udc->iclk); clk_put(udc->fclk); -- cgit v0.10.2 From 5672b7e6a99a91838c1b595a80d43006bcd9a178 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Mon, 14 Dec 2009 18:13:00 -0500 Subject: USB: ehci-orion.c: use resource_size() Use resource_size(). Signed-off-by: H Hartley Sweeten Cc: David Brownell Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 1d283e1..0f87dc7 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -222,14 +222,14 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev) goto err1; } - if (!request_mem_region(res->start, res->end - res->start + 1, + if (!request_mem_region(res->start, resource_size(res), ehci_orion_hc_driver.description)) { dev_dbg(&pdev->dev, "controller already in use\n"); err = -EBUSY; goto err1; } - regs = ioremap(res->start, res->end - res->start + 1); + regs = ioremap(res->start, resource_size(res)); if (regs == NULL) { dev_dbg(&pdev->dev, "error mapping memory\n"); err = -EFAULT; @@ -244,7 +244,7 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev) } hcd->rsrc_start = res->start; - hcd->rsrc_len = res->end - res->start + 1; + hcd->rsrc_len = resource_size(res); hcd->regs = regs; ehci = hcd_to_ehci(hcd); @@ -287,7 +287,7 @@ err4: err3: iounmap(regs); err2: - release_mem_region(res->start, res->end - res->start + 1); + release_mem_region(res->start, resource_size(res)); err1: dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), err); -- cgit v0.10.2 From f65c3540d316982c906e6ece7ccad00bba84574e Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Mon, 14 Dec 2009 18:15:35 -0500 Subject: USB: ehci-atmel.c: use resource_size() Use resource_size(). Signed-off-by: H Hartley Sweeten Cc: David Brownell Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index 87c1b7c..51bd0ed 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -149,7 +149,7 @@ static int __init ehci_atmel_drv_probe(struct platform_device *pdev) goto fail_request_resource; } hcd->rsrc_start = res->start; - hcd->rsrc_len = res->end - res->start + 1; + hcd->rsrc_len = resource_size(res); if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, driver->description)) { -- cgit v0.10.2 From 1f141ca2b1f40088203fba061cc7b1f8da7c38ab Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Mon, 14 Dec 2009 18:22:42 -0500 Subject: USB: ehci-au1xxx.c: use platform_get_resource() and resource_size() Use platform_get_resource() to fetch the memory resource and resource_size() for calculate the length. Signed-off-by: H Hartley Sweeten Cc: David Brownell Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c index dbfb482..e3a74e7 100644 --- a/drivers/usb/host/ehci-au1xxx.c +++ b/drivers/usb/host/ehci-au1xxx.c @@ -121,6 +121,7 @@ static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev) { struct usb_hcd *hcd; struct ehci_hcd *ehci; + struct resource *res; int ret; if (usb_disabled()) @@ -144,8 +145,9 @@ static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev) if (!hcd) return -ENOMEM; - hcd->rsrc_start = pdev->resource[0].start; - hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { pr_debug("request_mem_region failed"); -- cgit v0.10.2 From 97d35f95552c9a0ee4777a7f04431a9fd1260478 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 16 Dec 2009 17:05:57 +0100 Subject: USB: cdc-acm: Update to new autopm API Update cdc-acm to the async methods eliminating the workqueue Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index ef2e6f9..6ae7cca 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -170,6 +170,7 @@ static void acm_write_done(struct acm *acm, struct acm_wb *wb) { wb->use = 0; acm->transmitting--; + usb_autopm_put_interface_async(acm->control); } /* @@ -211,9 +212,12 @@ static int acm_write_start(struct acm *acm, int wbn) } dbg("%s susp_count: %d", __func__, acm->susp_count); + usb_autopm_get_interface_async(acm->control); if (acm->susp_count) { - acm->delayed_wb = wb; - schedule_work(&acm->waker); + if (!acm->delayed_wb) + acm->delayed_wb = wb; + else + usb_autopm_put_interface_async(acm->control); spin_unlock_irqrestore(&acm->write_lock, flags); return 0; /* A white lie */ } @@ -534,23 +538,6 @@ static void acm_softint(struct work_struct *work) tty_kref_put(tty); } -static void acm_waker(struct work_struct *waker) -{ - struct acm *acm = container_of(waker, struct acm, waker); - int rv; - - rv = usb_autopm_get_interface(acm->control); - if (rv < 0) { - dev_err(&acm->dev->dev, "Autopm failure in %s\n", __func__); - return; - } - if (acm->delayed_wb) { - acm_start_wb(acm, acm->delayed_wb); - acm->delayed_wb = NULL; - } - usb_autopm_put_interface(acm->control); -} - /* * TTY handlers */ @@ -1178,7 +1165,6 @@ made_compressed_probe: acm->urb_task.func = acm_rx_tasklet; acm->urb_task.data = (unsigned long) acm; INIT_WORK(&acm->work, acm_softint); - INIT_WORK(&acm->waker, acm_waker); init_waitqueue_head(&acm->drain_wait); spin_lock_init(&acm->throttle_lock); spin_lock_init(&acm->write_lock); @@ -1343,7 +1329,6 @@ static void stop_data_traffic(struct acm *acm) tasklet_enable(&acm->urb_task); cancel_work_sync(&acm->work); - cancel_work_sync(&acm->waker); } static void acm_disconnect(struct usb_interface *intf) @@ -1435,6 +1420,7 @@ static int acm_suspend(struct usb_interface *intf, pm_message_t message) static int acm_resume(struct usb_interface *intf) { struct acm *acm = usb_get_intfdata(intf); + struct acm_wb *wb; int rv = 0; int cnt; @@ -1449,6 +1435,21 @@ static int acm_resume(struct usb_interface *intf) mutex_lock(&acm->mutex); if (acm->port.count) { rv = usb_submit_urb(acm->ctrlurb, GFP_NOIO); + + spin_lock_irq(&acm->write_lock); + if (acm->delayed_wb) { + wb = acm->delayed_wb; + acm->delayed_wb = NULL; + spin_unlock_irq(&acm->write_lock); + acm_start_wb(acm, acm->delayed_wb); + } else { + spin_unlock_irq(&acm->write_lock); + } + + /* + * delayed error checking because we must + * do the write path at all cost + */ if (rv < 0) goto err_out; diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index c4a0ee8..519eb63 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -112,7 +112,6 @@ struct acm { struct mutex mutex; struct usb_cdc_line_coding line; /* bits, stop, parity */ struct work_struct work; /* work queue entry for line discipline waking up */ - struct work_struct waker; wait_queue_head_t drain_wait; /* close processing */ struct tasklet_struct urb_task; /* rx processing */ spinlock_t throttle_lock; /* synchronize throtteling and read callback */ -- cgit v0.10.2 From 319c3ea451e19f72b578661e26fb33739af5ae1c Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 16 Dec 2009 19:43:59 +0100 Subject: USB: xhci: No GFP_KERNEL in block error handling xhci_add_endpoint() is used in the reset path. It must use GFP_NOIO to avoid a possible deadlock. Signed-off-by: Oliver Neukum Acked-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c index c8573f8..4cb69e0 100644 --- a/drivers/usb/host/xhci-hcd.c +++ b/drivers/usb/host/xhci-hcd.c @@ -1007,7 +1007,7 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, * for usb_set_interface() and usb_set_configuration() claim). */ if (xhci_endpoint_init(xhci, xhci->devs[udev->slot_id], - udev, ep, GFP_KERNEL) < 0) { + udev, ep, GFP_NOIO) < 0) { dev_dbg(&udev->dev, "%s - could not initialize ep %#x\n", __func__, ep->desc.bEndpointAddress); return -ENOMEM; -- cgit v0.10.2 From 8bc1d21776bb012e41ed062c6d842cfe7c82998a Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 17 Dec 2009 13:57:33 +0000 Subject: USB: wusb: check CHID is all zeros before stopping the host An incorrect sizeof() resulted in only 4 (or 8) octets of the CHID being checked instead of all 16 octets. A randomly generated CHID had a probability of being unable to start a WUSB host of less than 1 in 2 billion. Signed-off-by: Julia Lawall Signed-off-by: David Vrabel Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/wusbcore/mmc.c b/drivers/usb/wusbcore/mmc.c index 3b52161..2d82739 100644 --- a/drivers/usb/wusbcore/mmc.c +++ b/drivers/usb/wusbcore/mmc.c @@ -263,7 +263,7 @@ int wusbhc_chid_set(struct wusbhc *wusbhc, const struct wusb_ckhdid *chid) { int result = 0; - if (memcmp(chid, &wusb_ckhdid_zero, sizeof(chid)) == 0) + if (memcmp(chid, &wusb_ckhdid_zero, sizeof(*chid)) == 0) chid = NULL; mutex_lock(&wusbhc->mutex); -- cgit v0.10.2 From e9a20171dfa0aa134d2211126d1310f2daea52cf Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 17 Dec 2009 13:01:36 +0200 Subject: USB: otg: add notifier support The notifier will be used to communicate usb events to other drivers like the charger chip. This can be used as source of information to kick usb charger detection as described by the USB Battery Charging Specification 1.1 and/or to pass bMaxPower field of selected usb_configuration to charger chip in order to use that information as input current on the charging profile setup. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index 52bb917..6c0b676 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -9,6 +9,8 @@ #ifndef __LINUX_USB_OTG_H #define __LINUX_USB_OTG_H +#include + /* OTG defines lots of enumeration states before device reset */ enum usb_otg_state { OTG_STATE_UNDEFINED = 0, @@ -33,6 +35,14 @@ enum usb_otg_state { OTG_STATE_A_VBUS_ERR, }; +enum usb_xceiv_events { + USB_EVENT_NONE, /* no events or cable disconnected */ + USB_EVENT_VBUS, /* vbus valid event */ + USB_EVENT_ID, /* id was grounded */ + USB_EVENT_CHARGER, /* usb dedicated charger */ + USB_EVENT_ENUMERATED, /* gadget driver enumerated */ +}; + #define USB_OTG_PULLUP_ID (1 << 0) #define USB_OTG_PULLDOWN_DP (1 << 1) #define USB_OTG_PULLDOWN_DM (1 << 2) @@ -70,6 +80,9 @@ struct otg_transceiver { struct otg_io_access_ops *io_ops; void __iomem *io_priv; + /* for notification of usb_xceiv_events */ + struct blocking_notifier_head notifier; + /* to pass extra port status to the root hub */ u16 port_status; u16 port_change; @@ -203,6 +216,18 @@ otg_start_srp(struct otg_transceiver *otg) return otg->start_srp(otg); } +/* notifiers */ +static inline int +otg_register_notifier(struct otg_transceiver *otg, struct notifier_block *nb) +{ + return blocking_notifier_chain_register(&otg->notifier, nb); +} + +static inline void +otg_unregister_notifier(struct otg_transceiver *otg, struct notifier_block *nb) +{ + blocking_notifier_chain_unregister(&otg->notifier, nb); +} /* for OTG controller drivers (and maybe other stuff) */ extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num); -- cgit v0.10.2 From d1b5b5c0a8a8204f0c51d5eb99736ecfb2fd5b4e Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 17 Dec 2009 13:01:37 +0200 Subject: USB: otg: twl4030: add support for notifier it's expected that the transceiver driver will initialize and call the notifier chain when necessary. Implement that for twl4030-usb driver. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c index 2be9f2f..34452d9 100644 --- a/drivers/usb/otg/twl4030-usb.c +++ b/drivers/usb/otg/twl4030-usb.c @@ -36,7 +36,7 @@ #include #include #include - +#include /* Register defines */ @@ -236,15 +236,6 @@ #define PMBR1 0x0D #define GPIO_USB_4PIN_ULPI_2430C (3 << 0) - - -enum linkstat { - USB_LINK_UNKNOWN = 0, - USB_LINK_NONE, - USB_LINK_VBUS, - USB_LINK_ID, -}; - struct twl4030_usb { struct otg_transceiver otg; struct device *dev; @@ -347,10 +338,10 @@ twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, u8 bits) /*-------------------------------------------------------------------------*/ -static enum linkstat twl4030_usb_linkstat(struct twl4030_usb *twl) +static enum usb_xceiv_events twl4030_usb_linkstat(struct twl4030_usb *twl) { int status; - int linkstat = USB_LINK_UNKNOWN; + int linkstat = USB_EVENT_NONE; /* * For ID/VBUS sensing, see manual section 15.4.8 ... @@ -368,11 +359,11 @@ static enum linkstat twl4030_usb_linkstat(struct twl4030_usb *twl) dev_err(twl->dev, "USB link status err %d\n", status); else if (status & (BIT(7) | BIT(2))) { if (status & BIT(2)) - linkstat = USB_LINK_ID; + linkstat = USB_EVENT_ID; else - linkstat = USB_LINK_VBUS; + linkstat = USB_EVENT_VBUS; } else - linkstat = USB_LINK_NONE; + linkstat = USB_EVENT_NONE; dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n", status, status, linkstat); @@ -383,7 +374,7 @@ static enum linkstat twl4030_usb_linkstat(struct twl4030_usb *twl) spin_lock_irq(&twl->lock); twl->linkstat = linkstat; - if (linkstat == USB_LINK_ID) { + if (linkstat == USB_EVENT_ID) { twl->otg.default_a = true; twl->otg.state = OTG_STATE_A_IDLE; } else { @@ -564,7 +555,7 @@ static ssize_t twl4030_usb_vbus_show(struct device *dev, spin_lock_irqsave(&twl->lock, flags); ret = sprintf(buf, "%s\n", - (twl->linkstat == USB_LINK_VBUS) ? "on" : "off"); + (twl->linkstat == USB_EVENT_VBUS) ? "on" : "off"); spin_unlock_irqrestore(&twl->lock, flags); return ret; @@ -585,8 +576,7 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl) #endif status = twl4030_usb_linkstat(twl); - if (status != USB_LINK_UNKNOWN) { - + if (status >= 0) { /* FIXME add a set_power() method so that B-devices can * configure the charger appropriately. It's not always * correct to consume VBUS power, and how much current to @@ -598,12 +588,13 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl) * USB_LINK_VBUS state. musb_hdrc won't care until it * starts to handle softconnect right. */ - if (status == USB_LINK_NONE) + if (status == USB_EVENT_NONE) twl4030_phy_suspend(twl, 0); else twl4030_phy_resume(twl); - twl4030charger_usb_en(status == USB_LINK_VBUS); + blocking_notifier_call_chain(&twl->otg.notifier, status, + twl->otg.gadget); } sysfs_notify(&twl->dev->kobj, NULL, "vbus"); @@ -693,6 +684,8 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev) if (device_create_file(&pdev->dev, &dev_attr_vbus)) dev_warn(&pdev->dev, "could not create sysfs file\n"); + BLOCKING_INIT_NOTIFIER_HEAD(&twl->otg.notifier); + /* Our job is to use irqs and status from the power module * to keep the transceiver disabled when nothing's connected. * -- cgit v0.10.2 From 5d3987796c7a747e5ed3ded1eb64a9632d52a1a4 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Fri, 18 Dec 2009 12:14:21 +0100 Subject: USB: storage: Never reset devices that will morph to an old mode Some devices must be switched to a new mode to fully use them. A reset would make them revert to the old mode. Therefore a reset must not be used for error handling with such devices. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index ab93918..0b68922 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -120,6 +120,7 @@ void usb_detect_quirks(struct usb_device *udev) * for all devices. It will affect things like hub resets * and EMF-related port disables. */ - udev->persist_enabled = 1; + if (!(udev->quirks & USB_QUIRK_RESET_MORPHS)) + udev->persist_enabled = 1; #endif /* CONFIG_PM */ } diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index cc313d1..4680381 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -47,6 +47,8 @@ #include #include +#include + #include #include #include @@ -1297,6 +1299,10 @@ int usb_stor_port_reset(struct us_data *us) { int result; + /*for these devices we must use the class specific method */ + if (us->pusb_dev->quirks & USB_QUIRK_RESET_MORPHS) + return -EPERM; + result = usb_lock_device_for_reset(us->pusb_dev, us->pusb_intf); if (result < 0) US_DEBUGP("unable to lock device for reset: %d\n", result); diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h index 2526f3b..0a555dd 100644 --- a/include/linux/usb/quirks.h +++ b/include/linux/usb/quirks.h @@ -19,4 +19,7 @@ /* device can't handle its Configuration or Interface strings */ #define USB_QUIRK_CONFIG_INTF_STRINGS 0x00000008 +/*device will morph if reset, don't use reset for handling errors */ +#define USB_QUIRK_RESET_MORPHS 0x00000010 + #endif /* __LINUX_USB_QUIRKS_H */ -- cgit v0.10.2 From ef955341f692475236f0fbe6853f49337dff77a5 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Sat, 16 Jan 2010 01:33:03 +0100 Subject: USB: Export QUIRK_RESET_MORPHS through sysfs Some devices which use mode switching revert to their primary mode as they are reset. They must not be reset for error handling. As user spaces makes the switch it also has to tell the kernel that a device is quirky. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index a07c0f3..a986e9b 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -159,3 +159,14 @@ Description: device. This is useful to ensure auto probing won't match the driver to the device. For example: # echo "046d c315" > /sys/bus/usb/drivers/foo/remove_id + +What: /sys/bus/usb/device/.../avoid_reset +Date: December 2009 +Contact: Oliver Neukum +Description: + Writing 1 to this file tells the kernel that this + device will morph into another mode when it is reset. + Drivers will not use reset for error handling for + such devices. +Users: + usb_modeswitch diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 5f3908f..b1725ab 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -191,6 +191,36 @@ show_quirks(struct device *dev, struct device_attribute *attr, char *buf) static DEVICE_ATTR(quirks, S_IRUGO, show_quirks, NULL); static ssize_t +show_avoid_reset_quirk(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct usb_device *udev; + + udev = to_usb_device(dev); + return sprintf(buf, "%d\n", !!(udev->quirks & USB_QUIRK_RESET_MORPHS)); +} + +static ssize_t +set_avoid_reset_quirk(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct usb_device *udev = to_usb_device(dev); + int config; + + if (sscanf(buf, "%d", &config) != 1 || config < 0 || config > 1) + return -EINVAL; + usb_lock_device(udev); + if (config) + udev->quirks |= USB_QUIRK_RESET_MORPHS; + else + udev->quirks &= ~USB_QUIRK_RESET_MORPHS; + usb_unlock_device(udev); + return count; +} + +static DEVICE_ATTR(avoid_reset_quirk, S_IRUGO | S_IWUSR, + show_avoid_reset_quirk, set_avoid_reset_quirk); + +static ssize_t show_urbnum(struct device *dev, struct device_attribute *attr, char *buf) { struct usb_device *udev; @@ -558,6 +588,7 @@ static struct attribute *dev_attrs[] = { &dev_attr_version.attr, &dev_attr_maxchild.attr, &dev_attr_quirks.attr, + &dev_attr_avoid_reset_quirk.attr, &dev_attr_authorized.attr, &dev_attr_remove.attr, NULL, -- cgit v0.10.2 From 64319dd74f3d45f13b6d0aafa91104eb105f1829 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 18 Dec 2009 16:33:01 -0500 Subject: USB: cypress_m8: stop using USB debug driver config The USB_SERIAL_DEBUG Kconfig is for the USB serial debug driver, not for generically enabling debug output in random USB serial drivers. Signed-off-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index a591ebe..8c69bc5 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -70,11 +70,7 @@ #include "cypress_m8.h" -#ifdef CONFIG_USB_SERIAL_DEBUG - static int debug = 1; -#else - static int debug; -#endif +static int debug; static int stats; static int interval; -- cgit v0.10.2 From 2805eb13c3b5be7bd6ec7380502bc054b570afd5 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 18 Dec 2009 16:33:02 -0500 Subject: USB: cypress_m8: unify confusing new baudrate check The current code has a confusing duplicate new_baudrate init when setting the serial parameters. So just combine the if statement checks to avoid this. Signed-off-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 8c69bc5..47a1819 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -352,15 +352,12 @@ static int cypress_serial_control(struct tty_struct *tty, switch (cypress_request_type) { case CYPRESS_SET_CONFIG: - new_baudrate = priv->baud_rate; /* 0 means 'Hang up' so doesn't change the true bit rate */ - if (baud_rate == 0) - new_baudrate = priv->baud_rate; - /* Change of speed ? */ - else if (baud_rate != priv->baud_rate) { + new_baudrate = priv->baud_rate; + if (baud_rate && baud_rate != priv->baud_rate) { dbg("%s - baud rate is changing", __func__); retval = analyze_baud_rate(port, baud_rate); - if (retval >= 0) { + if (retval >= 0) { new_baudrate = retval; dbg("%s - New baud rate set to %d", __func__, new_baudrate); -- cgit v0.10.2 From c312659c5ff1e54bac2d91e1ce1005d58784a7b5 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 18 Dec 2009 16:33:03 -0500 Subject: USB: cypress_m8: allow unstable baud rates I've got a crappy cypress converter here, and while running at higher baud rates craps out on throughput, it works fine with lower ones. While it'd be nice to simply use a lower baud rate, not all devices can be configured this way, and it is possible to (slowly) interact at higher rates by sending a byte at a time. So let people force higher rates when they need it via a module parameter. Signed-off-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 47a1819..60c2002 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -73,6 +73,7 @@ static int debug; static int stats; static int interval; +static int unstable_bauds; /* * Version Information @@ -291,6 +292,9 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate) struct cypress_private *priv; priv = usb_get_serial_port_data(port); + if (unstable_bauds) + return new_rate; + /* * The general purpose firmware for the Cypress M8 allows for * a maximum speed of 57600bps (I have no idea whether DeLorme @@ -1643,3 +1647,5 @@ module_param(stats, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(stats, "Enable statistics or not"); module_param(interval, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(interval, "Overrides interrupt interval"); +module_param(unstable_bauds, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(unstable_bauds, "Allow unstable baud rates"); -- cgit v0.10.2 From 6ebb7d1b4b98162e332ff43a8739c2c1c690b140 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 19 Dec 2009 08:17:44 +0100 Subject: USB: isp1362: Use kzalloc for allocating only one thing Use kzalloc rather than kcalloc(1,...) The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @@ @@ - kcalloc(1, + kzalloc( ...) // Signed-off-by: Julia Lawall Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 4297165..5596fc1 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -1257,7 +1257,7 @@ static int isp1362_urb_enqueue(struct usb_hcd *hcd, /* avoid all allocations within spinlocks: request or endpoint */ if (!hep->hcpriv) { - ep = kcalloc(1, sizeof *ep, mem_flags); + ep = kzalloc(sizeof *ep, mem_flags); if (!ep) return -ENOMEM; } -- cgit v0.10.2 From 8ca5bfab154487fd75a946e6e95d3519eb74be6a Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 21 Dec 2009 12:53:24 -0500 Subject: USB: host: SL811: fix unaligned accesses Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu Signed-off-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 5b22a4d..e11cc3a 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -51,6 +51,7 @@ #include #include #include +#include #include "../core/hcd.h" #include "sl811.h" @@ -1272,12 +1273,12 @@ sl811h_hub_control( sl811h_hub_descriptor(sl811, (struct usb_hub_descriptor *) buf); break; case GetHubStatus: - *(__le32 *) buf = cpu_to_le32(0); + put_unaligned_le32(0, buf); break; case GetPortStatus: if (wIndex != 1) goto error; - *(__le32 *) buf = cpu_to_le32(sl811->port1); + put_unaligned_le32(sl811->port1, buf); #ifndef VERBOSE if (*(u16*)(buf+2)) /* only if wPortChange is interesting */ -- cgit v0.10.2 From ca0e9485afb8db3abf58235abf6afded2df0db17 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 21 Dec 2009 11:16:00 -0500 Subject: USB: host: SL811: allow the hcd on Blackfin systems Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu Signed-off-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 81aac7f..b92b086 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -21,6 +21,7 @@ config USB_ARCH_HAS_HCD default y if USB_ARCH_HAS_EHCI default y if PCMCIA && !M32R # sl811_cs default y if ARM # SL-811 + default y if BLACKFIN # SL-811 default y if SUPERH # r8a66597-hcd default PCI -- cgit v0.10.2 From 3a8a3b1cee6c525661732b8bcf29ac63d42945ed Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Mon, 21 Dec 2009 10:43:06 -0500 Subject: USB: gadget: use ep5 for bulk-in and ep6 for bulk-out for Blackfin MUSB Normally, the musb uses ep1 as the bidirectional bulk endpoint. This won't work on the Blackfin musb as all endpoints (except ep0) are unidirectional. Further, ep1-ep4 have a small 128 byte FIFO which makes them undesirable for bulk endpoints (which need more like a 512 byte FIFO). This leaves us with ep5-ep7 which have 1024 byte FIFOs and can be configured as either in/out and bulk/interrupt/iso on the fly. Signed-off-by: Bryan Wu Signed-off-by: Cliff Cai Signed-off-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c index cd0914e..4671d5d 100644 --- a/drivers/usb/gadget/epautoconf.c +++ b/drivers/usb/gadget/epautoconf.c @@ -275,6 +275,20 @@ struct usb_ep * __init usb_ep_autoconfig ( ep = find_ep (gadget, "ep1-bulk"); if (ep && ep_matches (gadget, ep, desc)) return ep; + +#ifdef CONFIG_BLACKFIN + } else if (gadget_is_musbhsfc(gadget) || gadget_is_musbhdrc(gadget)) { + if ((USB_ENDPOINT_XFER_BULK == type) || + (USB_ENDPOINT_XFER_ISOC == type)) { + if (USB_DIR_IN & desc->bEndpointAddress) + ep = find_ep (gadget, "ep5in"); + else + ep = find_ep (gadget, "ep6out"); + } else + ep = NULL; + if (ep && ep_matches (gadget, ep, desc)) + return ep; +#endif } /* Second, look at endpoints until an unclaimed one looks usable */ -- cgit v0.10.2 From 767ffec15e25b34c7194e47f0ad1fbf63a568d44 Mon Sep 17 00:00:00 2001 From: Cliff Cai Date: Mon, 21 Dec 2009 10:42:39 -0500 Subject: USB: gadget: add INT support for Blackfin musb Signed-off-by: Cliff Cai Signed-off-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c index 4671d5d..949ebe5e 100644 --- a/drivers/usb/gadget/epautoconf.c +++ b/drivers/usb/gadget/epautoconf.c @@ -284,6 +284,11 @@ struct usb_ep * __init usb_ep_autoconfig ( ep = find_ep (gadget, "ep5in"); else ep = find_ep (gadget, "ep6out"); + } else if (USB_ENDPOINT_XFER_INT == type) { + if (USB_DIR_IN & desc->bEndpointAddress) + ep = find_ep(gadget, "ep1in"); + else + ep = find_ep(gadget, "ep2out"); } else ep = NULL; if (ep && ep_matches (gadget, ep, desc)) -- cgit v0.10.2 From 195e9e4691ad0544746540852e03d7c8c6c877ea Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 15 Dec 2009 11:08:42 +0200 Subject: USB: musb: use resource_size() it makes ioremap() usage looks cleaner. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 5eb9318..1927fa9 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2134,7 +2134,7 @@ static int __init musb_probe(struct platform_device *pdev) if (!iomem || irq == 0) return -ENODEV; - base = ioremap(iomem->start, iomem->end - iomem->start + 1); + base = ioremap(iomem->start, resource_size(iomem)); if (!base) { dev_err(dev, "ioremap failed\n"); return -ENOMEM; -- cgit v0.10.2 From b3b1cc3ba62374e71155ba8c09ee481c3c2d923e Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 15 Dec 2009 11:08:43 +0200 Subject: USB: musb: move two printk to dev_err trivial cleanup, no functional changes. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 1927fa9..91c31f2 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1696,7 +1696,7 @@ musb_vbus_store(struct device *dev, struct device_attribute *attr, unsigned long val; if (sscanf(buf, "%lu", &val) < 1) { - printk(KERN_ERR "Invalid VBUS timeout ms value\n"); + dev_err(dev, "Invalid VBUS timeout ms value\n"); return -EINVAL; } @@ -1746,7 +1746,7 @@ musb_srp_store(struct device *dev, struct device_attribute *attr, if (sscanf(buf, "%hu", &srp) != 1 || (srp != 1)) { - printk(KERN_ERR "SRP: Value must be 1\n"); + dev_err(dev, "SRP: Value must be 1\n"); return -EINVAL; } -- cgit v0.10.2 From 94375751d1d8af70df08beebdc32595f9e4537e1 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 15 Dec 2009 11:08:38 +0200 Subject: USB: musb: move to sysfs_groups it's easier to keep up and add more sysfs entries as necessary. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 91c31f2..52295bc 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1759,6 +1759,19 @@ static DEVICE_ATTR(srp, 0644, NULL, musb_srp_store); #endif /* CONFIG_USB_GADGET_MUSB_HDRC */ +static struct attribute *musb_attributes[] = { + &dev_attr_mode.attr, + &dev_attr_vbus.attr, +#ifdef CONFIG_USB_GADGET_MUSB_HDRC + &dev_attr_srp.attr, +#endif + NULL +}; + +static const struct attribute_group musb_attr_group = { + .attrs = musb_attributes, +}; + #endif /* sysfs */ /* Only used to provide driver mode change events */ @@ -1833,11 +1846,7 @@ static void musb_free(struct musb *musb) */ #ifdef CONFIG_SYSFS - device_remove_file(musb->controller, &dev_attr_mode); - device_remove_file(musb->controller, &dev_attr_vbus); -#ifdef CONFIG_USB_GADGET_MUSB_HDRC - device_remove_file(musb->controller, &dev_attr_srp); -#endif + sysfs_remove_group(&musb->controller->kobj, &musb_attr_group); #endif #ifdef CONFIG_USB_GADGET_MUSB_HDRC @@ -2079,12 +2088,7 @@ bad_config: } #ifdef CONFIG_SYSFS - status = device_create_file(dev, &dev_attr_mode); - status = device_create_file(dev, &dev_attr_vbus); -#ifdef CONFIG_USB_GADGET_MUSB_HDRC - status = device_create_file(dev, &dev_attr_srp); -#endif /* CONFIG_USB_GADGET_MUSB_HDRC */ - status = 0; + status = sysfs_create_group(&musb->controller->kobj, &musb_attr_group); #endif if (status) goto fail2; @@ -2092,13 +2096,6 @@ bad_config: return 0; fail2: -#ifdef CONFIG_SYSFS - device_remove_file(musb->controller, &dev_attr_mode); - device_remove_file(musb->controller, &dev_attr_vbus); -#ifdef CONFIG_USB_GADGET_MUSB_HDRC - device_remove_file(musb->controller, &dev_attr_srp); -#endif -#endif musb_platform_exit(musb); fail: dev_err(musb->controller, -- cgit v0.10.2 From 7ed069c12c866c5c06e4e05d26878797e3731829 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 15 Dec 2009 11:08:39 +0200 Subject: USB: musb: remove some of the never defined defines just makes the musb init code a bit cleaner. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 52295bc..b7e2d1b 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1314,9 +1314,6 @@ enum { MUSB_CONTROLLER_MHDRC, MUSB_CONTROLLER_HDRC, }; */ static int __init musb_core_init(u16 musb_type, struct musb *musb) { -#ifdef MUSB_AHB_ID - u32 data; -#endif u8 reg; char *type; char aInfo[90], aRevision[32], aDate[12]; @@ -1332,19 +1329,11 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb) strcat(aInfo, ", dyn FIFOs"); if (reg & MUSB_CONFIGDATA_MPRXE) { strcat(aInfo, ", bulk combine"); -#ifdef C_MP_RX musb->bulk_combine = true; -#else - strcat(aInfo, " (X)"); /* no driver support */ -#endif } if (reg & MUSB_CONFIGDATA_MPTXE) { strcat(aInfo, ", bulk split"); -#ifdef C_MP_TX musb->bulk_split = true; -#else - strcat(aInfo, " (X)"); /* no driver support */ -#endif } if (reg & MUSB_CONFIGDATA_HBRXE) { strcat(aInfo, ", HB-ISO Rx"); @@ -1360,20 +1349,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb) printk(KERN_DEBUG "%s: ConfigData=0x%02x (%s)\n", musb_driver_name, reg, aInfo); -#ifdef MUSB_AHB_ID - data = musb_readl(mbase, 0x404); - sprintf(aDate, "%04d-%02x-%02x", (data & 0xffff), - (data >> 16) & 0xff, (data >> 24) & 0xff); - /* FIXME ID2 and ID3 are unused */ - data = musb_readl(mbase, 0x408); - printk(KERN_DEBUG "ID2=%lx\n", (long unsigned)data); - data = musb_readl(mbase, 0x40c); - printk(KERN_DEBUG "ID3=%lx\n", (long unsigned)data); - reg = musb_readb(mbase, 0x400); - musb_type = ('M' == reg) ? MUSB_CONTROLLER_MHDRC : MUSB_CONTROLLER_HDRC; -#else aDate[0] = 0; -#endif if (MUSB_CONTROLLER_MHDRC == musb_type) { musb->is_multipoint = 1; type = "M"; diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 03d5090..2ac0e6f 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -412,21 +412,13 @@ struct musb { unsigned hb_iso_rx:1; /* high bandwidth iso rx? */ unsigned hb_iso_tx:1; /* high bandwidth iso tx? */ -#ifdef C_MP_TX - unsigned bulk_split:1; + unsigned bulk_split:1; #define can_bulk_split(musb,type) \ - (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_split) -#else -#define can_bulk_split(musb, type) 0 -#endif + (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_split) -#ifdef C_MP_RX - unsigned bulk_combine:1; + unsigned bulk_combine:1; #define can_bulk_combine(musb,type) \ - (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_combine) -#else -#define can_bulk_combine(musb, type) 0 -#endif + (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_combine) #ifdef CONFIG_USB_GADGET_MUSB_HDRC /* is_suspended means USB B_PERIPHERAL suspend */ -- cgit v0.10.2 From 2bc0d109326e9f2b25fa1dfcc9de2489e1e00e36 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Tue, 5 Jan 2010 11:50:07 -0700 Subject: usbmon: add bus number to text API Due to a simple oversight when bus zero was added, the text API fails to deliver the bus number in 'E' messages (which are equivalent of 'C' messages, only for error case). This makes it harder, for instance, use a search-and-highlight in a text editor. So fix it. Also, Alan Stern requested adding timestamps to 'E' messages. This is purely cosmetic, but makes it easier to read the trace. This is done for both text and binary APIs. Signed-off-by: Pete Zaitcev Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index 385ec05..6dd44bc 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -460,8 +460,8 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb, char ev_type, int status) { const struct usb_endpoint_descriptor *epd = &urb->ep->desc; - unsigned long flags; struct timeval ts; + unsigned long flags; unsigned int urb_length; unsigned int offset; unsigned int length; @@ -600,10 +600,13 @@ static void mon_bin_complete(void *data, struct urb *urb, int status) static void mon_bin_error(void *data, struct urb *urb, int error) { struct mon_reader_bin *rp = data; + struct timeval ts; unsigned long flags; unsigned int offset; struct mon_bin_hdr *ep; + do_gettimeofday(&ts); + spin_lock_irqsave(&rp->b_lock, flags); offset = mon_buff_area_alloc(rp, PKT_SIZE); @@ -623,6 +626,8 @@ static void mon_bin_error(void *data, struct urb *urb, int error) ep->devnum = urb->dev->devnum; ep->busnum = urb->dev->bus->busnum; ep->id = (unsigned long) urb; + ep->ts_sec = ts.tv_sec; + ep->ts_usec = ts.tv_usec; ep->status = error; ep->flag_setup = '-'; diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c index 047568f..16bfb61 100644 --- a/drivers/usb/mon/mon_text.c +++ b/drivers/usb/mon/mon_text.c @@ -273,12 +273,12 @@ static void mon_text_error(void *data, struct urb *urb, int error) ep->type = 'E'; ep->id = (unsigned long) urb; - ep->busnum = 0; + ep->busnum = urb->dev->bus->busnum; ep->devnum = urb->dev->devnum; ep->epnum = usb_endpoint_num(&urb->ep->desc); ep->xfertype = usb_endpoint_type(&urb->ep->desc); ep->is_in = usb_urb_dir_in(urb); - ep->tstamp = 0; + ep->tstamp = mon_get_timestamp(); ep->length = 0; ep->status = error; -- cgit v0.10.2 From 7c5d8c394a077a686cfa646cd85dc159a2a940cc Mon Sep 17 00:00:00 2001 From: Julian Calaby Date: Tue, 5 Jan 2010 23:57:46 +1100 Subject: USB: cdc_acm: Add support for pbLua console port The pbLua firmware (http://pblua.com/) for the Lego Mindstorms NXT provides a CDC ACM port for it's serial console. This used to be detected automatically, but this support has been dropped, probably for sensible reasons. Explicitly add support for this device by adding an item to the device ID table. Signed-off-by: Julian Calaby Cc: Oliver Neukum Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 6ae7cca..d071da9 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1594,6 +1594,9 @@ static struct usb_device_id acm_ids[] = { /* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */ + /* Support Lego NXT using pbLua firmware */ + { USB_DEVICE(0x0694, 0xff00), }, + /* control interfaces with various AT-command sets */ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, USB_CDC_ACM_PROTO_AT_V25TER) }, -- cgit v0.10.2 From ce126644aa10bf1d8f1c1929b65adab026095761 Mon Sep 17 00:00:00 2001 From: Julian Calaby Date: Tue, 5 Jan 2010 23:58:20 +1100 Subject: USB: cdc_acm: Silence "It is not a modem." error for pbLua devices The pbLua console port is known to not be a modem, so it is unnecessary to be told this when it is plugged in. Add NOT_A_MODEM quirk to tell the driver that we know this already and hence not to warn us, and mark the pbLua console port. Signed-off-by: Julian Calaby Cc: Oliver Neukum Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index d071da9..95f29a2 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1010,7 +1010,7 @@ static int acm_probe(struct usb_interface *intf, case USB_CDC_CALL_MANAGEMENT_TYPE: call_management_function = buffer[3]; call_interface_num = buffer[4]; - if ((call_management_function & 3) != 3) + if ( (quirks & NOT_A_MODEM) == 0 && (call_management_function & 3) != 3) dev_err(&intf->dev, "This device cannot do calls on its own. It is not a modem.\n"); break; default: @@ -1595,7 +1595,9 @@ static struct usb_device_id acm_ids[] = { /* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */ /* Support Lego NXT using pbLua firmware */ - { USB_DEVICE(0x0694, 0xff00), }, + { USB_DEVICE(0x0694, 0xff00), + .driver_info = NOT_A_MODEM, + }, /* control interfaces with various AT-command sets */ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index 519eb63..4a8e87e 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -136,3 +136,4 @@ struct acm { #define NO_UNION_NORMAL 1 #define SINGLE_RX_URB 2 #define NO_CAP_LINE 4 +#define NOT_A_MODEM 8 -- cgit v0.10.2 From 16985408b5c48585762ec3b9b7bae1dec4ad7437 Mon Sep 17 00:00:00 2001 From: Dan Streetman Date: Wed, 6 Jan 2010 09:56:53 -0500 Subject: USB: retain USB device power/wakeup setting across reconfiguration Currently a non-root-hub USB device's wakeup settings are initialized when the device is set to a configured state using device_init_wakeup(), but this is not correct as wakeup is split into "capable" (can_wakeup) and "enabled" (should_wakeup). The settings should be initialized instead in the device initialization (usb_new_device) with the "capable" setting disabled and the "enabled" setting enabled. The "capable" setting should be set based on the device being configured or unconfigured, and "enabled" setting set based on the sysfs power/wakeup control. This patch retains the sysfs power/wakeup setting of a non-root-hub USB device over a USB device re-configuration, which can happen (for example) after a suspend/resume cycle. Signed-off-by: Dan Streetman Cc: David Brownell Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index bb416cd..6f84d38 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1448,11 +1448,11 @@ void usb_set_device_state(struct usb_device *udev, || new_state == USB_STATE_SUSPENDED) ; /* No change to wakeup settings */ else if (new_state == USB_STATE_CONFIGURED) - device_init_wakeup(&udev->dev, + device_set_wakeup_capable(&udev->dev, (udev->actconfig->desc.bmAttributes & USB_CONFIG_ATT_WAKEUP)); else - device_init_wakeup(&udev->dev, 0); + device_set_wakeup_capable(&udev->dev, 0); } if (udev->state == USB_STATE_SUSPENDED && new_state != USB_STATE_SUSPENDED) @@ -1799,10 +1799,18 @@ int usb_new_device(struct usb_device *udev) { int err; - /* Increment the parent's count of unsuspended children */ - if (udev->parent) + if (udev->parent) { + /* Increment the parent's count of unsuspended children */ usb_autoresume_device(udev->parent); + /* Initialize non-root-hub device wakeup to disabled; + * device (un)configuration controls wakeup capable + * sysfs power/wakeup controls wakeup enabled/disabled + */ + device_init_wakeup(&udev->dev, 0); + device_set_wakeup_enable(&udev->dev, 1); + } + usb_detect_quirks(udev); err = usb_enumerate_device(udev); /* Read descriptors */ if (err < 0) -- cgit v0.10.2 From 551cdbbeb118bd5ed301f8749aef69219284399b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 14 Jan 2010 11:08:04 -0800 Subject: USB: rename USB_SPEED_VARIABLE to USB_SPEED_WIRELESS It's really the wireless speed, so rename the thing to make more sense. Based on a recommendation from David Vrabel Cc: David Vrabel Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/usbip/vhci_sysfs.c b/drivers/staging/usbip/vhci_sysfs.c index d8992d1..f6e34e0 100644 --- a/drivers/staging/usbip/vhci_sysfs.c +++ b/drivers/staging/usbip/vhci_sysfs.c @@ -144,7 +144,7 @@ static int valid_args(__u32 rhport, enum usb_device_speed speed) case USB_SPEED_LOW: case USB_SPEED_FULL: case USB_SPEED_HIGH: - case USB_SPEED_VARIABLE: + case USB_SPEED_WIRELESS: break; default: usbip_uerr("speed %d\n", speed); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 6f84d38..4986ff6 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1990,7 +1990,7 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1, if (!(portstatus & USB_PORT_STAT_RESET) && (portstatus & USB_PORT_STAT_ENABLE)) { if (hub_is_wusb(hub)) - udev->speed = USB_SPEED_VARIABLE; + udev->speed = USB_SPEED_WIRELESS; else if (portstatus & USB_PORT_STAT_HIGH_SPEED) udev->speed = USB_SPEED_HIGH; else if (portstatus & USB_PORT_STAT_LOW_SPEED) @@ -2689,7 +2689,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, */ switch (udev->speed) { case USB_SPEED_SUPER: - case USB_SPEED_VARIABLE: /* fixed at 512 */ + case USB_SPEED_WIRELESS: /* fixed at 512 */ udev->ep0.desc.wMaxPacketSize = cpu_to_le16(512); break; case USB_SPEED_HIGH: /* fixed at 64 */ @@ -2717,7 +2717,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, case USB_SPEED_SUPER: speed = "super"; break; - case USB_SPEED_VARIABLE: + case USB_SPEED_WIRELESS: speed = "variable"; type = "Wireless "; break; diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index b1725ab..1b3c00b 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -115,7 +115,7 @@ show_speed(struct device *dev, struct device_attribute *attr, char *buf) case USB_SPEED_HIGH: speed = "480"; break; - case USB_SPEED_VARIABLE: + case USB_SPEED_WIRELESS: speed = "480"; break; case USB_SPEED_SUPER: diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index e2bd153..2708056 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -437,7 +437,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) case USB_ENDPOINT_XFER_INT: /* too small? */ switch (dev->speed) { - case USB_SPEED_VARIABLE: + case USB_SPEED_WIRELESS: if (urb->interval < 6) return -EINVAL; break; @@ -453,7 +453,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) if (urb->interval > (1 << 15)) return -EINVAL; max = 1 << 15; - case USB_SPEED_VARIABLE: + case USB_SPEED_WIRELESS: if (urb->interval > 16) return -EINVAL; break; @@ -480,7 +480,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) default: return -EINVAL; } - if (dev->speed != USB_SPEED_VARIABLE) { + if (dev->speed != USB_SPEED_WIRELESS) { /* Round down to a power of 2, no more than max */ urb->interval = min(max, 1 << ilog2(urb->interval)); } diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 8045bc6..49f7d72 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -454,7 +454,7 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud case USB_SPEED_LOW: slot_ctx->dev_info |= (u32) SLOT_SPEED_LS; break; - case USB_SPEED_VARIABLE: + case USB_SPEED_WIRELESS: xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n"); return -EINVAL; break; @@ -498,7 +498,7 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud case USB_SPEED_LOW: ep0_ctx->ep_info2 |= MAX_PACKET(8); break; - case USB_SPEED_VARIABLE: + case USB_SPEED_WIRELESS: xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n"); return -EINVAL; break; diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c index dced419..1c91828 100644 --- a/drivers/usb/wusbcore/devconnect.c +++ b/drivers/usb/wusbcore/devconnect.c @@ -868,7 +868,7 @@ static struct usb_wireless_cap_descriptor wusb_cap_descr_default = { * reference that we'll drop. * * First we need to determine if the device is a WUSB device (else we - * ignore it). For that we use the speed setting (USB_SPEED_VARIABLE) + * ignore it). For that we use the speed setting (USB_SPEED_WIRELESS) * [FIXME: maybe we'd need something more definitive]. If so, we track * it's usb_busd and from there, the WUSB HC. * diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index 94012e6..e58369f 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -775,7 +775,7 @@ enum usb_device_speed { USB_SPEED_UNKNOWN = 0, /* enumerating */ USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */ USB_SPEED_HIGH, /* usb 2.0 */ - USB_SPEED_VARIABLE, /* wireless (usb 2.5) */ + USB_SPEED_WIRELESS, /* wireless (usb 2.5) */ USB_SPEED_SUPER, /* usb 3.0 */ }; -- cgit v0.10.2 From 4357369d024c709d91864af88f02d7ac08d0f470 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 24 Dec 2009 12:42:07 +0100 Subject: USB: ftdi_sio: use error code from usb stack in read_latency_timer Use same semantics as for write_latency_timer. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 44c5b77..ec901ed 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1193,10 +1193,9 @@ static int read_latency_timer(struct usb_serial_port *port) 0, priv->interface, (char *) &latency, 1, WDR_TIMEOUT); - if (rv < 0) { + if (rv < 0) dev_err(&port->dev, "Unable to read latency timer: %i\n", rv); - return -EIO; - } else + else priv->latency = latency; return rv; } -- cgit v0.10.2 From 54f328d0c7221675e3c1647e1918172fec1b92c9 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 24 Dec 2009 12:42:08 +0100 Subject: USB: ftdi_sio: fix latency-timeout endianess bug Also fixes DMA transfer to stack for latency buffer. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index ec901ed..59b6cbf 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1181,22 +1181,28 @@ static int read_latency_timer(struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); struct usb_device *udev = port->serial->dev; - unsigned short latency = 0; + unsigned char *buf; int rv = 0; dbg("%s", __func__); + buf = kmalloc(1, GFP_KERNEL); + if (!buf) + return -ENOMEM; + rv = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), FTDI_SIO_GET_LATENCY_TIMER_REQUEST, FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE, 0, priv->interface, - (char *) &latency, 1, WDR_TIMEOUT); - + buf, 1, WDR_TIMEOUT); if (rv < 0) dev_err(&port->dev, "Unable to read latency timer: %i\n", rv); else - priv->latency = latency; + priv->latency = buf[0]; + + kfree(buf); + return rv; } -- cgit v0.10.2 From 66e47e6006a558b33c6f15bd2e072d52c40e0159 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 24 Dec 2009 12:42:09 +0100 Subject: USB: ftdi_sio: fix DMA buffers on stack Also remove unnecessary buffer allocations for zero-length transfers. Reported-by: Matti Aarnio Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 59b6cbf..a6e5a0d 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -935,7 +935,6 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, unsigned int clear) { struct ftdi_private *priv = usb_get_serial_port_data(port); - char *buf; unsigned urb_value; int rv; @@ -944,10 +943,6 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, return 0; /* no change */ } - buf = kmalloc(1, GFP_NOIO); - if (!buf) - return -ENOMEM; - clear &= ~set; /* 'set' takes precedence over 'clear' */ urb_value = 0; if (clear & TIOCM_DTR) @@ -963,9 +958,7 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, FTDI_SIO_SET_MODEM_CTRL_REQUEST, FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE, urb_value, priv->interface, - buf, 0, WDR_TIMEOUT); - - kfree(buf); + NULL, 0, WDR_TIMEOUT); if (rv < 0) { dbg("%s Error from MODEM_CTRL urb: DTR %s, RTS %s", __func__, @@ -1124,16 +1117,11 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, static int change_speed(struct tty_struct *tty, struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); - char *buf; __u16 urb_value; __u16 urb_index; __u32 urb_index_value; int rv; - buf = kmalloc(1, GFP_NOIO); - if (!buf) - return -ENOMEM; - urb_index_value = get_ftdi_divisor(tty, port); urb_value = (__u16)urb_index_value; urb_index = (__u16)(urb_index_value >> 16); @@ -1146,9 +1134,7 @@ static int change_speed(struct tty_struct *tty, struct usb_serial_port *port) FTDI_SIO_SET_BAUDRATE_REQUEST, FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE, urb_value, urb_index, - buf, 0, WDR_SHORT_TIMEOUT); - - kfree(buf); + NULL, 0, WDR_SHORT_TIMEOUT); return rv; } @@ -1156,7 +1142,6 @@ static int write_latency_timer(struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); struct usb_device *udev = port->serial->dev; - char buf[1]; int rv = 0; int l = priv->latency; @@ -1170,8 +1155,7 @@ static int write_latency_timer(struct usb_serial_port *port) FTDI_SIO_SET_LATENCY_TIMER_REQUEST, FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE, l, priv->interface, - buf, 0, WDR_TIMEOUT); - + NULL, 0, WDR_TIMEOUT); if (rv < 0) dev_err(&port->dev, "Unable to write latency timer: %i\n", rv); return rv; @@ -1445,7 +1429,6 @@ static ssize_t store_event_char(struct device *dev, struct usb_serial_port *port = to_usb_serial_port(dev); struct ftdi_private *priv = usb_get_serial_port_data(port); struct usb_device *udev = port->serial->dev; - char buf[1]; int v = simple_strtoul(valbuf, NULL, 10); int rv = 0; @@ -1456,8 +1439,7 @@ static ssize_t store_event_char(struct device *dev, FTDI_SIO_SET_EVENT_CHAR_REQUEST, FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE, v, priv->interface, - buf, 0, WDR_TIMEOUT); - + NULL, 0, WDR_TIMEOUT); if (rv < 0) { dbg("Unable to write event character: %i", rv); return -EIO; @@ -1636,7 +1618,6 @@ static int ftdi_NDI_device_setup(struct usb_serial *serial) struct usb_device *udev = serial->dev; int latency = ndi_latency_timer; int rv = 0; - char buf[1]; if (latency == 0) latency = 1; @@ -1649,7 +1630,7 @@ static int ftdi_NDI_device_setup(struct usb_serial *serial) rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), FTDI_SIO_SET_LATENCY_TIMER_REQUEST, FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE, - latency, 0, buf, 0, WDR_TIMEOUT); + latency, 0, NULL, 0, WDR_TIMEOUT); return 0; } @@ -1737,9 +1718,7 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) struct usb_device *dev = port->serial->dev; struct ftdi_private *priv = usb_get_serial_port_data(port); unsigned long flags; - int result = 0; - char buf[1]; /* Needed for the usb_control_msg I think */ dbg("%s", __func__); @@ -1754,7 +1733,7 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) usb_control_msg(dev, usb_sndctrlpipe(dev, 0), FTDI_SIO_RESET_REQUEST, FTDI_SIO_RESET_REQUEST_TYPE, FTDI_SIO_RESET_SIO, - priv->interface, buf, 0, WDR_TIMEOUT); + priv->interface, NULL, 0, WDR_TIMEOUT); /* Termios defaults are set by usb_serial_init. We don't change port->tty->termios - this would lose speed settings, etc. @@ -1782,7 +1761,6 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) static void ftdi_dtr_rts(struct usb_serial_port *port, int on) { struct ftdi_private *priv = usb_get_serial_port_data(port); - char buf[1]; mutex_lock(&port->serial->disc_mutex); if (!port->serial->disconnected) { @@ -1791,7 +1769,7 @@ static void ftdi_dtr_rts(struct usb_serial_port *port, int on) usb_sndctrlpipe(port->serial->dev, 0), FTDI_SIO_SET_FLOW_CTRL_REQUEST, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, - 0, priv->interface, buf, 0, + 0, priv->interface, NULL, 0, WDR_TIMEOUT) < 0) { dev_err(&port->dev, "error from flowcontrol urb\n"); } @@ -2160,7 +2138,6 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state) struct usb_serial_port *port = tty->driver_data; struct ftdi_private *priv = usb_get_serial_port_data(port); __u16 urb_value = 0; - char buf[1]; /* break_state = -1 to turn on break, and 0 to turn off break */ /* see drivers/char/tty_io.c to see it used */ @@ -2176,7 +2153,7 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state) FTDI_SIO_SET_DATA_REQUEST, FTDI_SIO_SET_DATA_REQUEST_TYPE, urb_value , priv->interface, - buf, 0, WDR_TIMEOUT) < 0) { + NULL, 0, WDR_TIMEOUT) < 0) { dev_err(&port->dev, "%s FAILED to enable/disable break state " "(state was %d)\n", __func__, break_state); } @@ -2200,7 +2177,6 @@ static void ftdi_set_termios(struct tty_struct *tty, struct ktermios *termios = tty->termios; unsigned int cflag = termios->c_cflag; __u16 urb_value; /* will hold the new flags */ - char buf[1]; /* Perhaps I should dynamically alloc this? */ /* Added for xon/xoff support */ unsigned int iflag = termios->c_iflag; @@ -2266,7 +2242,7 @@ static void ftdi_set_termios(struct tty_struct *tty, FTDI_SIO_SET_DATA_REQUEST, FTDI_SIO_SET_DATA_REQUEST_TYPE, urb_value , priv->interface, - buf, 0, WDR_SHORT_TIMEOUT) < 0) { + NULL, 0, WDR_SHORT_TIMEOUT) < 0) { dev_err(&port->dev, "%s FAILED to set " "databits/stopbits/parity\n", __func__); } @@ -2278,7 +2254,7 @@ static void ftdi_set_termios(struct tty_struct *tty, FTDI_SIO_SET_FLOW_CTRL_REQUEST, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0, priv->interface, - buf, 0, WDR_TIMEOUT) < 0) { + NULL, 0, WDR_TIMEOUT) < 0) { dev_err(&port->dev, "%s error from disable flowcontrol urb\n", __func__); @@ -2304,7 +2280,7 @@ static void ftdi_set_termios(struct tty_struct *tty, FTDI_SIO_SET_FLOW_CTRL_REQUEST, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0 , (FTDI_SIO_RTS_CTS_HS | priv->interface), - buf, 0, WDR_TIMEOUT) < 0) { + NULL, 0, WDR_TIMEOUT) < 0) { dev_err(&port->dev, "urb failed to set to rts/cts flow control\n"); } @@ -2336,7 +2312,7 @@ static void ftdi_set_termios(struct tty_struct *tty, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, urb_value , (FTDI_SIO_XON_XOFF_HS | priv->interface), - buf, 0, WDR_TIMEOUT) < 0) { + NULL, 0, WDR_TIMEOUT) < 0) { dev_err(&port->dev, "urb failed to set to " "xon/xoff flow control\n"); } @@ -2350,7 +2326,7 @@ static void ftdi_set_termios(struct tty_struct *tty, FTDI_SIO_SET_FLOW_CTRL_REQUEST, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0, priv->interface, - buf, 0, WDR_TIMEOUT) < 0) { + NULL, 0, WDR_TIMEOUT) < 0) { dev_err(&port->dev, "urb failed to clear flow control\n"); } @@ -2364,10 +2340,15 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file) { struct usb_serial_port *port = tty->driver_data; struct ftdi_private *priv = usb_get_serial_port_data(port); - unsigned char buf[2]; + unsigned char *buf; int ret; dbg("%s TIOCMGET", __func__); + + buf = kmalloc(2, GFP_KERNEL); + if (!buf) + return -ENOMEM; + switch (priv->chip_type) { case SIO: /* Request the status from the device */ @@ -2378,7 +2359,7 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file) 0, 0, buf, 1, WDR_TIMEOUT); if (ret < 0) - return ret; + goto out; break; case FT8U232AM: case FT232BM: @@ -2396,17 +2377,21 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file) 0, priv->interface, buf, 2, WDR_TIMEOUT); if (ret < 0) - return ret; + goto out; break; default: - return -EFAULT; + ret = -EFAULT; + goto out; } - return (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) | + ret = (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) | (buf[0] & FTDI_SIO_CTS_MASK ? TIOCM_CTS : 0) | (buf[0] & FTDI_SIO_RI_MASK ? TIOCM_RI : 0) | (buf[0] & FTDI_SIO_RLSD_MASK ? TIOCM_CD : 0) | priv->last_dtr_rts; +out: + kfree(buf); + return ret; } static int ftdi_tiocmset(struct tty_struct *tty, struct file *file, -- cgit v0.10.2 From a3f8168b7a3a7d9dfb9bb9caa1e009a5ce2a8493 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 24 Dec 2009 12:42:10 +0100 Subject: USB: ftdi_sio: clean up modem status handling Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index a6e5a0d..58698a6 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -2341,6 +2341,7 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file) struct usb_serial_port *port = tty->driver_data; struct ftdi_private *priv = usb_get_serial_port_data(port); unsigned char *buf; + int len; int ret; dbg("%s TIOCMGET", __func__); @@ -2348,18 +2349,13 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file) buf = kmalloc(2, GFP_KERNEL); if (!buf) return -ENOMEM; - + /* + * The 8U232AM returns a two byte value (the SIO a 1 byte value) in + * the same format as the data returned from the in point. + */ switch (priv->chip_type) { case SIO: - /* Request the status from the device */ - ret = usb_control_msg(port->serial->dev, - usb_rcvctrlpipe(port->serial->dev, 0), - FTDI_SIO_GET_MODEM_STATUS_REQUEST, - FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE, - 0, 0, - buf, 1, WDR_TIMEOUT); - if (ret < 0) - goto out; + len = 1; break; case FT8U232AM: case FT232BM: @@ -2367,23 +2363,22 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file) case FT232RL: case FT2232H: case FT4232H: - /* the 8U232AM returns a two byte value (the sio is a 1 byte - value) - in the same format as the data returned from the in - point */ - ret = usb_control_msg(port->serial->dev, - usb_rcvctrlpipe(port->serial->dev, 0), - FTDI_SIO_GET_MODEM_STATUS_REQUEST, - FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE, - 0, priv->interface, - buf, 2, WDR_TIMEOUT); - if (ret < 0) - goto out; + len = 2; break; default: ret = -EFAULT; goto out; } + ret = usb_control_msg(port->serial->dev, + usb_rcvctrlpipe(port->serial->dev, 0), + FTDI_SIO_GET_MODEM_STATUS_REQUEST, + FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE, + 0, priv->interface, + buf, len, WDR_TIMEOUT); + if (ret < 0) + goto out; + ret = (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) | (buf[0] & FTDI_SIO_CTS_MASK ? TIOCM_CTS : 0) | (buf[0] & FTDI_SIO_RI_MASK ? TIOCM_RI : 0) | -- cgit v0.10.2 From c1284d7726c57c9d2bbc65cd08173fe7f9e637df Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 24 Dec 2009 12:42:11 +0100 Subject: USB: ftdi_sio: remove unnecessary initialisations Return values are being initialised to zero only to be unconditionally assigned to a few instructions later. This may give the impression that zero is returned on success, which is not the case. Note also that ftdi_NDI_device_setup never reports errors. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 58698a6..37db5a0 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1142,7 +1142,7 @@ static int write_latency_timer(struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); struct usb_device *udev = port->serial->dev; - int rv = 0; + int rv; int l = priv->latency; if (priv->flags & ASYNC_LOW_LATENCY) @@ -1166,7 +1166,7 @@ static int read_latency_timer(struct usb_serial_port *port) struct ftdi_private *priv = usb_get_serial_port_data(port); struct usb_device *udev = port->serial->dev; unsigned char *buf; - int rv = 0; + int rv; dbg("%s", __func__); @@ -1360,7 +1360,7 @@ static void ftdi_set_max_packet_size(struct usb_serial_port *port) struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1].desc; unsigned num_endpoints; - int i = 0; + int i; num_endpoints = interface->cur_altsetting->desc.bNumEndpoints; dev_info(&udev->dev, "Number of endpoints %d\n", num_endpoints); @@ -1412,7 +1412,7 @@ static ssize_t store_latency_timer(struct device *dev, struct usb_serial_port *port = to_usb_serial_port(dev); struct ftdi_private *priv = usb_get_serial_port_data(port); int v = simple_strtoul(valbuf, NULL, 10); - int rv = 0; + int rv; priv->latency = v; rv = write_latency_timer(port); @@ -1430,7 +1430,7 @@ static ssize_t store_event_char(struct device *dev, struct ftdi_private *priv = usb_get_serial_port_data(port); struct usb_device *udev = port->serial->dev; int v = simple_strtoul(valbuf, NULL, 10); - int rv = 0; + int rv; dbg("%s: setting event char = %i", __func__, v); @@ -1617,7 +1617,6 @@ static int ftdi_NDI_device_setup(struct usb_serial *serial) { struct usb_device *udev = serial->dev; int latency = ndi_latency_timer; - int rv = 0; if (latency == 0) latency = 1; @@ -1627,7 +1626,8 @@ static int ftdi_NDI_device_setup(struct usb_serial *serial) dbg("%s setting NDI device latency to %d", __func__, latency); dev_info(&udev->dev, "NDI device with a latency value of %d", latency); - rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + /* FIXME: errors are not returned */ + usb_control_msg(udev, usb_sndctrlpipe(udev, 0), FTDI_SIO_SET_LATENCY_TIMER_REQUEST, FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE, latency, 0, NULL, 0, WDR_TIMEOUT); @@ -1718,7 +1718,7 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) struct usb_device *dev = port->serial->dev; struct ftdi_private *priv = usb_get_serial_port_data(port); unsigned long flags; - int result = 0; + int result; dbg("%s", __func__); @@ -2137,7 +2137,7 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; struct ftdi_private *priv = usb_get_serial_port_data(port); - __u16 urb_value = 0; + __u16 urb_value; /* break_state = -1 to turn on break, and 0 to turn off break */ /* see drivers/char/tty_io.c to see it used */ -- cgit v0.10.2 From 3a90f81872b00a7526c2bb1ed7664fe5af727f39 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 28 Dec 2009 00:52:17 +0100 Subject: USB: usblp: Remove checks no longer needed with the new runtime PM system Under the new system a device cannot be suspended against the driver's wish. Therefore this condition no longer needs to be checked for. Signed-off-by: Oliver Neukum Cc: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 9bc112e..9d8ec72 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -163,7 +163,6 @@ struct usblp { unsigned char used; /* True if open */ unsigned char present; /* True if not disconnected */ unsigned char bidir; /* interface is bidirectional */ - unsigned char sleeping; /* interface is suspended */ unsigned char no_paper; /* Paper Out happened */ unsigned char *device_id_string; /* IEEE 1284 DEVICE ID string (ptr) */ /* first 2 bytes are (big-endian) length */ @@ -191,7 +190,6 @@ static void usblp_dump(struct usblp *usblp) { dbg("quirks=%d", usblp->quirks); dbg("used=%d", usblp->used); dbg("bidir=%d", usblp->bidir); - dbg("sleeping=%d", usblp->sleeping); dbg("device_id_string=\"%s\"", usblp->device_id_string ? usblp->device_id_string + 2 : @@ -376,7 +374,7 @@ static int usblp_check_status(struct usblp *usblp, int err) static int handle_bidir (struct usblp *usblp) { - if (usblp->bidir && usblp->used && !usblp->sleeping) { + if (usblp->bidir && usblp->used) { if (usblp_submit_read(usblp) < 0) return -EIO; } @@ -503,11 +501,6 @@ static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) goto done; } - if (usblp->sleeping) { - retval = -ENODEV; - goto done; - } - dbg("usblp_ioctl: cmd=0x%x (%c nr=%d len=%d dir=%d)", cmd, _IOC_TYPE(cmd), _IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd) ); @@ -914,8 +907,6 @@ static int usblp_wtest(struct usblp *usblp, int nonblock) return 0; } spin_unlock_irqrestore(&usblp->lock, flags); - if (usblp->sleeping) - return -ENODEV; if (nonblock) return -EAGAIN; return 1; @@ -968,8 +959,6 @@ static int usblp_rtest(struct usblp *usblp, int nonblock) return 0; } spin_unlock_irqrestore(&usblp->lock, flags); - if (usblp->sleeping) - return -ENODEV; if (nonblock) return -EAGAIN; return 1; @@ -1377,12 +1366,10 @@ static void usblp_disconnect(struct usb_interface *intf) mutex_unlock (&usblp_mutex); } -static int usblp_suspend (struct usb_interface *intf, pm_message_t message) +static int usblp_suspend(struct usb_interface *intf, pm_message_t message) { struct usblp *usblp = usb_get_intfdata (intf); - /* we take no more IO */ - usblp->sleeping = 1; usblp_unlink_urbs(usblp); #if 0 /* XXX Do we want this? What if someone is reading, should we fail? */ /* not strictly necessary, but just in case */ @@ -1393,12 +1380,11 @@ static int usblp_suspend (struct usb_interface *intf, pm_message_t message) return 0; } -static int usblp_resume (struct usb_interface *intf) +static int usblp_resume(struct usb_interface *intf) { struct usblp *usblp = usb_get_intfdata (intf); int r; - usblp->sleeping = 0; r = handle_bidir (usblp); return r; -- cgit v0.10.2 From c9188ad25dde86e929bd567166b5a1366a3a9059 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Mon, 28 Dec 2009 06:31:08 -0500 Subject: USB: Correct CONFIG variable typo. Signed-off-by: Robert P. J. Day Cc: David Brownell Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 141372b..400f8037 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -259,7 +259,7 @@ static struct usb_configuration rndis_config_driver = { /*-------------------------------------------------------------------------*/ -#ifdef USB_ETH_EEM +#ifdef CONFIG_USB_ETH_EEM static int use_eem = 1; #else static int use_eem; -- cgit v0.10.2 From 8f20960cd772fe42a9cdd36312b2247bc2800ffb Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 28 Dec 2009 13:02:48 +0200 Subject: usb: otg: twl4030: move to request_threaded_irq move to request_threaded_irq() on twl4030 children. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c index 34452d9..3e4e9f4 100644 --- a/drivers/usb/otg/twl4030-usb.c +++ b/drivers/usb/otg/twl4030-usb.c @@ -567,14 +567,6 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl) struct twl4030_usb *twl = _twl; int status; -#ifdef CONFIG_LOCKDEP - /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which - * we don't want and can't tolerate. Although it might be - * friendlier not to borrow this thread context... - */ - local_irq_enable(); -#endif - status = twl4030_usb_linkstat(twl); if (status >= 0) { /* FIXME add a set_power() method so that B-devices can @@ -695,7 +687,7 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev) * need both handles, otherwise just one suffices. */ twl->irq_enabled = true; - status = request_irq(twl->irq, twl4030_usb_irq, + status = request_threaded_irq(twl->irq, NULL, twl4030_usb_irq, IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "twl4030_usb", twl); if (status < 0) { -- cgit v0.10.2 From 3b151526eda87901532390e11bba0dd59119f667 Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Mon, 28 Dec 2009 13:40:34 +0200 Subject: USB: musb: Add new fifo table for a OMAP3 errata We have observed MSC data read corruption when USB LAN device is also connected and it's interface is up. Silicon team has confirmed an errata where in all the active transfers should use FIFO space either in first 8K or next 8K. So far we have observed the issue in above use case scenario. As a workaround to it, adding a new FIFO config (5) fitting well within first 8K which can be used for such use cases. Signed-off-by: Ajay Kumar Gupta Acked-by: Anand Gadiyar Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index b7e2d1b..c4893267 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1095,6 +1095,36 @@ static struct fifo_cfg __initdata mode_4_cfg[] = { { .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, }, }; +/* mode 5 - fits in 8KB */ +static struct fifo_cfg __initdata mode_5_cfg[] = { +{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 5, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 5, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 6, .style = FIFO_TX, .maxpacket = 32, }, +{ .hw_ep_num = 6, .style = FIFO_RX, .maxpacket = 32, }, +{ .hw_ep_num = 7, .style = FIFO_TX, .maxpacket = 32, }, +{ .hw_ep_num = 7, .style = FIFO_RX, .maxpacket = 32, }, +{ .hw_ep_num = 8, .style = FIFO_TX, .maxpacket = 32, }, +{ .hw_ep_num = 8, .style = FIFO_RX, .maxpacket = 32, }, +{ .hw_ep_num = 9, .style = FIFO_TX, .maxpacket = 32, }, +{ .hw_ep_num = 9, .style = FIFO_RX, .maxpacket = 32, }, +{ .hw_ep_num = 10, .style = FIFO_TX, .maxpacket = 32, }, +{ .hw_ep_num = 10, .style = FIFO_RX, .maxpacket = 32, }, +{ .hw_ep_num = 11, .style = FIFO_TX, .maxpacket = 32, }, +{ .hw_ep_num = 11, .style = FIFO_RX, .maxpacket = 32, }, +{ .hw_ep_num = 12, .style = FIFO_TX, .maxpacket = 32, }, +{ .hw_ep_num = 12, .style = FIFO_RX, .maxpacket = 32, }, +{ .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 512, }, +{ .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, }, +{ .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, }, +}; /* * configure a fifo; for non-shared endpoints, this may be called @@ -1210,6 +1240,10 @@ static int __init ep_config_from_table(struct musb *musb) cfg = mode_4_cfg; n = ARRAY_SIZE(mode_4_cfg); break; + case 5: + cfg = mode_5_cfg; + n = ARRAY_SIZE(mode_5_cfg); + break; } printk(KERN_DEBUG "%s: setup fifo_mode %d\n", -- cgit v0.10.2 From 452f0394376d2cc882e4c4a593fc290c042799a9 Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Mon, 28 Dec 2009 13:40:35 +0200 Subject: usb: musb: hsdma: add wrapper for reading DMA count Add a wrapper for reading the DMA count register, analogous to the one for writing to this register. Signed-off-by: Anand Gadiyar Cc: Vikram Pandita Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h index 1299d92..613f95a 100644 --- a/drivers/usb/musb/musbhsdma.h +++ b/drivers/usb/musb/musbhsdma.h @@ -55,6 +55,10 @@ MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDRESS), \ addr) +#define musb_read_hsdma_count(mbase, bchannel) \ + musb_readl(mbase, \ + MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT)) + #define musb_write_hsdma_count(mbase, bchannel, len) \ musb_writel(mbase, \ MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT), \ @@ -96,6 +100,19 @@ static inline void musb_write_hsdma_addr(void __iomem *mbase, ((u16)(((u32) dma_addr >> 16) & 0xFFFF))); } +static inline u32 musb_read_hsdma_count(void __iomem *mbase, u8 bchannel) +{ + u32 count = musb_readw(mbase, + MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH)); + + count = count << 16; + + count |= musb_readw(mbase, + MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW)); + + return count; +} + static inline void musb_write_hsdma_count(void __iomem *mbase, u8 bchannel, u32 len) { -- cgit v0.10.2 From f933a0c0fe0ea5f49a35bcd45e3e4850e0606cba Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Mon, 28 Dec 2009 13:40:36 +0200 Subject: usb: musb: workaround MUSB DMA_INTR sometimes reads zero MUSB DMA_INTR register may sometimes read zero when infact there was a pending interrupt. Workaround this by reading the DMA_COUNT values for all enabled channels when this condition occurs. Flag these channels as the ones needing to be serviced. Additionally, the absence of a debug print meant we would never catch a spurious DMA interrupt in MUSB. So this patch adds a debug print in the IRQ handler. Signed-off-by: Anand Gadiyar Cc: Ajay Kumar Gupta Cc: David Brownell Cc: Sergei Shtylyov Cc: Vikram Pandita Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index a237550..2fa7d5c 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -250,20 +250,39 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data) u8 bchannel; u8 int_hsdma; - u32 addr; + u32 addr, count; u16 csr; spin_lock_irqsave(&musb->lock, flags); int_hsdma = musb_readb(mbase, MUSB_HSDMA_INTR); - if (!int_hsdma) - goto done; #ifdef CONFIG_BLACKFIN /* Clear DMA interrupt flags */ musb_writeb(mbase, MUSB_HSDMA_INTR, int_hsdma); #endif + if (!int_hsdma) { + DBG(2, "spurious DMA irq\n"); + + for (bchannel = 0; bchannel < MUSB_HSDMA_CHANNELS; bchannel++) { + musb_channel = (struct musb_dma_channel *) + &(controller->channel[bchannel]); + channel = &musb_channel->channel; + if (channel->status == MUSB_DMA_STATUS_BUSY) { + count = musb_read_hsdma_count(mbase, bchannel); + + if (count == 0) + int_hsdma |= (1 << bchannel); + } + } + + DBG(2, "int_hsdma = 0x%x\n", int_hsdma); + + if (!int_hsdma) + goto done; + } + for (bchannel = 0; bchannel < MUSB_HSDMA_CHANNELS; bchannel++) { if (int_hsdma & (1 << bchannel)) { musb_channel = (struct musb_dma_channel *) -- cgit v0.10.2 From 5274dab6cb99c529b2e7f16bbc8ff9a79be46e7f Mon Sep 17 00:00:00 2001 From: Swaminathan S Date: Mon, 28 Dec 2009 13:40:37 +0200 Subject: usb: musb: workaround toggle bug when doing bulk transfer after isoc This patch implements the work around for a Mentor controller related bug where it's observed a BULK Tx toggle error on the bus when a BULK IO gets scheduled on an endpoint that was earlier used for handling ISOC transaction and needed to start on 1 toggle. When such a situation arises even if the TXCSR toggle bits are programmed correctly by the musb driver the data gets transmitted with 0 toggle which leads to toggle error on the bus and the BULK transaction fails. In case of MSC write, the device gets reset by the Host. This Mentor bug is observed on almost all Mentor versions (1.3, 1.5, 1.8). Confirmed on DM644x, DM355, DM365, OMAPL13x platforms. Signed-off-by: Swaminathan S Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 74c4c36..c3fdd6d 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1771,6 +1771,9 @@ static int musb_schedule( int best_end, epnum; struct musb_hw_ep *hw_ep = NULL; struct list_head *head = NULL; + u8 toggle; + u8 txtype; + struct urb *urb = next_urb(qh); /* use fixed hardware for control and bulk */ if (qh->type == USB_ENDPOINT_XFER_CONTROL) { @@ -1809,6 +1812,27 @@ static int musb_schedule( diff -= (qh->maxpacket * qh->hb_mult); if (diff >= 0 && best_diff > diff) { + + /* + * Mentor controller has a bug in that if we schedule + * a BULK Tx transfer on an endpoint that had earlier + * handled ISOC then the BULK transfer has to start on + * a zero toggle. If the BULK transfer starts on a 1 + * toggle then this transfer will fail as the mentor + * controller starts the Bulk transfer on a 0 toggle + * irrespective of the programming of the toggle bits + * in the TXCSR register. Check for this condition + * while allocating the EP for a Tx Bulk transfer. If + * so skip this EP. + */ + hw_ep = musb->endpoints + epnum; + toggle = usb_gettoggle(urb->dev, qh->epnum, !is_in); + txtype = (musb_readb(hw_ep->regs, MUSB_TXTYPE) + >> 4) & 0x3; + if (!is_in && (qh->type == USB_ENDPOINT_XFER_BULK) && + toggle && (txtype == USB_ENDPOINT_XFER_ISOC)) + continue; + best_diff = diff; best_end = epnum; } -- cgit v0.10.2 From 565969237ab6e73ce7192684d00d5b890ee308fa Mon Sep 17 00:00:00 2001 From: Swaminathan S Date: Mon, 28 Dec 2009 13:40:38 +0200 Subject: usb: musb: Fix cppi_channel_abort() function to handle Tx abort correctly This patch fixes the Tx abort/teardown logic. We now wait for the teardown completion interrupt and acknowledge the same by setting the tx_complete register to 0. This change is needed to ensure that abort processing works on DM365 platform. Without this change after completion of abort processing the system is overwhelmed with continuous stream of abort interrupts. This change has been tested on all CPPI3.x platforms (DM644x, DM646x, DM35x, DM36x). Signed-off-by: Swaminathan S Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index a44a450..3c69a76 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -1191,8 +1191,13 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id) bd = tx_ch->head; + /* + * If Head is null then this could mean that a abort interrupt + * that needs to be acknowledged. + */ if (NULL == bd) { DBG(1, "null BD\n"); + tx_ram->tx_complete = 0; continue; } @@ -1412,15 +1417,6 @@ static int cppi_channel_abort(struct dma_channel *channel) if (cppi_ch->transmit) { struct cppi_tx_stateram __iomem *tx_ram; - int enabled; - - /* mask interrupts raised to signal teardown complete. */ - enabled = musb_readl(tibase, DAVINCI_TXCPPI_INTENAB_REG) - & (1 << cppi_ch->index); - if (enabled) - musb_writel(tibase, DAVINCI_TXCPPI_INTCLR_REG, - (1 << cppi_ch->index)); - /* REVISIT put timeouts on these controller handshakes */ cppi_dump_tx(6, cppi_ch, " (teardown)"); @@ -1435,7 +1431,6 @@ static int cppi_channel_abort(struct dma_channel *channel) do { value = musb_readl(&tx_ram->tx_complete, 0); } while (0xFFFFFFFC != value); - musb_writel(&tx_ram->tx_complete, 0, 0xFFFFFFFC); /* FIXME clean up the transfer state ... here? * the completion routine should get called with @@ -1448,23 +1443,15 @@ static int cppi_channel_abort(struct dma_channel *channel) musb_writew(regs, MUSB_TXCSR, value); musb_writew(regs, MUSB_TXCSR, value); - /* While we scrub the TX state RAM, ensure that we clean - * up any interrupt that's currently asserted: + /* * 1. Write to completion Ptr value 0x1(bit 0 set) * (write back mode) - * 2. Write to completion Ptr value 0x0(bit 0 cleared) - * (compare mode) - * Value written is compared(for bits 31:2) and when - * equal, interrupt is deasserted. + * 2. Wait for abort interrupt and then put the channel in + * compare mode by writing 1 to the tx_complete register. */ cppi_reset_tx(tx_ram, 1); - musb_writel(&tx_ram->tx_complete, 0, 0); - - /* re-enable interrupt */ - if (enabled) - musb_writel(tibase, DAVINCI_TXCPPI_INTENAB_REG, - (1 << cppi_ch->index)); - + cppi_ch->head = 0; + musb_writel(&tx_ram->tx_complete, 0, 1); cppi_dump_tx(5, cppi_ch, " (done teardown)"); /* REVISIT tx side _should_ clean up the same way -- cgit v0.10.2 From 1ca9e9ca314c4757409a7f4e9c1f12229a175834 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Mon, 28 Dec 2009 13:40:39 +0200 Subject: usb: musb: clean up commit 'workaround Blackfin FIFO anomalies' The version applied had a few comments which are now done. Thanks to Sergei for pointing out. Signed-off-by: Bryan Wu Signed-off-by: Cliff Cai Signed-off-by: Mike Frysinger Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index ad26e65..bcee133 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -30,7 +30,6 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) void __iomem *fifo = hw_ep->fifo; void __iomem *epio = hw_ep->regs; u8 epnum = hw_ep->epnum; - u16 dma_reg = 0; prefetch((u8 *)src); @@ -42,15 +41,17 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) dump_fifo_data(src, len); if (!ANOMALY_05000380 && epnum != 0) { - flush_dcache_range((unsigned int)src, - (unsigned int)(src + len)); + u16 dma_reg; + + flush_dcache_range((unsigned long)src, + (unsigned long)(src + len)); /* Setup DMA address register */ - dma_reg = (u16) ((u32) src & 0xFFFF); + dma_reg = (u32)src; bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg); SSYNC(); - dma_reg = (u16) (((u32) src >> 16) & 0xFFFF); + dma_reg = (u32)src >> 16; bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg); SSYNC(); @@ -79,12 +80,9 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) SSYNC(); if (unlikely((unsigned long)src & 0x01)) - outsw_8((unsigned long)fifo, src, - len & 0x01 ? (len >> 1) + 1 : len >> 1); + outsw_8((unsigned long)fifo, src, (len + 1) >> 1); else - outsw((unsigned long)fifo, src, - len & 0x01 ? (len >> 1) + 1 : len >> 1); - + outsw((unsigned long)fifo, src, (len + 1) >> 1); } } /* @@ -94,19 +92,19 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) { void __iomem *fifo = hw_ep->fifo; u8 epnum = hw_ep->epnum; - u16 dma_reg = 0; if (ANOMALY_05000467 && epnum != 0) { + u16 dma_reg; - invalidate_dcache_range((unsigned int)dst, - (unsigned int)(dst + len)); + invalidate_dcache_range((unsigned long)dst, + (unsigned long)(dst + len)); /* Setup DMA address register */ - dma_reg = (u16) ((u32) dst & 0xFFFF); + dma_reg = (u32)dst; bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg); SSYNC(); - dma_reg = (u16) (((u32) dst >> 16) & 0xFFFF); + dma_reg = (u32)dst >> 16; bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg); SSYNC(); -- cgit v0.10.2 From 1c25fda4a09e8229800979986ef399401053b46e Mon Sep 17 00:00:00 2001 From: Arnaud Mandy Date: Mon, 28 Dec 2009 13:40:40 +0200 Subject: usb: musb: handle irqs in the order dictated by programming guide MUSB's programming guide dictates how we should handle its irqs and in which order. Follow that. Signed-off-by: Arnaud Mandy Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index c4893267..bd14e81 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -557,6 +557,69 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, handled = IRQ_HANDLED; } + + if (int_usb & MUSB_INTR_SUSPEND) { + DBG(1, "SUSPEND (%s) devctl %02x power %02x\n", + otg_state_string(musb), devctl, power); + handled = IRQ_HANDLED; + + switch (musb->xceiv->state) { +#ifdef CONFIG_USB_MUSB_OTG + case OTG_STATE_A_PERIPHERAL: + /* We also come here if the cable is removed, since + * this silicon doesn't report ID-no-longer-grounded. + * + * We depend on T(a_wait_bcon) to shut us down, and + * hope users don't do anything dicey during this + * undesired detour through A_WAIT_BCON. + */ + musb_hnp_stop(musb); + usb_hcd_resume_root_hub(musb_to_hcd(musb)); + musb_root_disconnect(musb); + musb_platform_try_idle(musb, jiffies + + msecs_to_jiffies(musb->a_wait_bcon + ? : OTG_TIME_A_WAIT_BCON)); + + break; +#endif + case OTG_STATE_B_IDLE: + if (!musb->is_active) + break; + case OTG_STATE_B_PERIPHERAL: + musb_g_suspend(musb); + musb->is_active = is_otg_enabled(musb) + && musb->xceiv->gadget->b_hnp_enable; + if (musb->is_active) { +#ifdef CONFIG_USB_MUSB_OTG + musb->xceiv->state = OTG_STATE_B_WAIT_ACON; + DBG(1, "HNP: Setting timer for b_ase0_brst\n"); + mod_timer(&musb->otg_timer, jiffies + + msecs_to_jiffies( + OTG_TIME_B_ASE0_BRST)); +#endif + } + break; + case OTG_STATE_A_WAIT_BCON: + if (musb->a_wait_bcon != 0) + musb_platform_try_idle(musb, jiffies + + msecs_to_jiffies(musb->a_wait_bcon)); + break; + case OTG_STATE_A_HOST: + musb->xceiv->state = OTG_STATE_A_SUSPEND; + musb->is_active = is_otg_enabled(musb) + && musb->xceiv->host->b_hnp_enable; + break; + case OTG_STATE_B_HOST: + /* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */ + DBG(1, "REVISIT: SUSPEND as B_HOST\n"); + break; + default: + /* "should not happen" */ + musb->is_active = 0; + break; + } + } + if (int_usb & MUSB_INTR_CONNECT) { struct usb_hcd *hcd = musb_to_hcd(musb); @@ -625,10 +688,61 @@ b_host: } #endif /* CONFIG_USB_MUSB_HDRC_HCD */ + if ((int_usb & MUSB_INTR_DISCONNECT) && !musb->ignore_disconnect) { + DBG(1, "DISCONNECT (%s) as %s, devctl %02x\n", + otg_state_string(musb), + MUSB_MODE(musb), devctl); + handled = IRQ_HANDLED; + + switch (musb->xceiv->state) { +#ifdef CONFIG_USB_MUSB_HDRC_HCD + case OTG_STATE_A_HOST: + case OTG_STATE_A_SUSPEND: + usb_hcd_resume_root_hub(musb_to_hcd(musb)); + musb_root_disconnect(musb); + if (musb->a_wait_bcon != 0 && is_otg_enabled(musb)) + musb_platform_try_idle(musb, jiffies + + msecs_to_jiffies(musb->a_wait_bcon)); + break; +#endif /* HOST */ +#ifdef CONFIG_USB_MUSB_OTG + case OTG_STATE_B_HOST: + /* REVISIT this behaves for "real disconnect" + * cases; make sure the other transitions from + * from B_HOST act right too. The B_HOST code + * in hnp_stop() is currently not used... + */ + musb_root_disconnect(musb); + musb_to_hcd(musb)->self.is_b_host = 0; + musb->xceiv->state = OTG_STATE_B_PERIPHERAL; + MUSB_DEV_MODE(musb); + musb_g_disconnect(musb); + break; + case OTG_STATE_A_PERIPHERAL: + musb_hnp_stop(musb); + musb_root_disconnect(musb); + /* FALLTHROUGH */ + case OTG_STATE_B_WAIT_ACON: + /* FALLTHROUGH */ +#endif /* OTG */ +#ifdef CONFIG_USB_GADGET_MUSB_HDRC + case OTG_STATE_B_PERIPHERAL: + case OTG_STATE_B_IDLE: + musb_g_disconnect(musb); + break; +#endif /* GADGET */ + default: + WARNING("unhandled DISCONNECT transition (%s)\n", + otg_state_string(musb)); + break; + } + } + /* mentor saves a bit: bus reset and babble share the same irq. * only host sees babble; only peripheral sees bus reset. */ if (int_usb & MUSB_INTR_RESET) { + handled = IRQ_HANDLED; if (is_host_capable() && (devctl & MUSB_DEVCTL_HM) != 0) { /* * Looks like non-HS BABBLE can be ignored, but @@ -641,7 +755,7 @@ b_host: DBG(1, "BABBLE devctl: %02x\n", devctl); else { ERR("Stopping host session -- babble\n"); - musb_writeb(mbase, MUSB_DEVCTL, 0); + musb_writeb(musb->mregs, MUSB_DEVCTL, 0); } } else if (is_peripheral_capable()) { DBG(1, "BUS RESET as %s\n", otg_state_string(musb)); @@ -686,29 +800,7 @@ b_host: otg_state_string(musb)); } } - - handled = IRQ_HANDLED; } - schedule_work(&musb->irq_work); - - return handled; -} - -/* - * Interrupt Service Routine to record USB "global" interrupts. - * Since these do not happen often and signify things of - * paramount importance, it seems OK to check them individually; - * the order of the tests is specified in the manual - * - * @param musb instance pointer - * @param int_usb register contents - * @param devctl - * @param power - */ -static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb, - u8 devctl, u8 power) -{ - irqreturn_t handled = IRQ_NONE; #if 0 /* REVISIT ... this would be for multiplexing periodic endpoints, or @@ -755,117 +847,7 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb, } #endif - if ((int_usb & MUSB_INTR_DISCONNECT) && !musb->ignore_disconnect) { - DBG(1, "DISCONNECT (%s) as %s, devctl %02x\n", - otg_state_string(musb), - MUSB_MODE(musb), devctl); - handled = IRQ_HANDLED; - - switch (musb->xceiv->state) { -#ifdef CONFIG_USB_MUSB_HDRC_HCD - case OTG_STATE_A_HOST: - case OTG_STATE_A_SUSPEND: - usb_hcd_resume_root_hub(musb_to_hcd(musb)); - musb_root_disconnect(musb); - if (musb->a_wait_bcon != 0 && is_otg_enabled(musb)) - musb_platform_try_idle(musb, jiffies - + msecs_to_jiffies(musb->a_wait_bcon)); - break; -#endif /* HOST */ -#ifdef CONFIG_USB_MUSB_OTG - case OTG_STATE_B_HOST: - /* REVISIT this behaves for "real disconnect" - * cases; make sure the other transitions from - * from B_HOST act right too. The B_HOST code - * in hnp_stop() is currently not used... - */ - musb_root_disconnect(musb); - musb_to_hcd(musb)->self.is_b_host = 0; - musb->xceiv->state = OTG_STATE_B_PERIPHERAL; - MUSB_DEV_MODE(musb); - musb_g_disconnect(musb); - break; - case OTG_STATE_A_PERIPHERAL: - musb_hnp_stop(musb); - musb_root_disconnect(musb); - /* FALLTHROUGH */ - case OTG_STATE_B_WAIT_ACON: - /* FALLTHROUGH */ -#endif /* OTG */ -#ifdef CONFIG_USB_GADGET_MUSB_HDRC - case OTG_STATE_B_PERIPHERAL: - case OTG_STATE_B_IDLE: - musb_g_disconnect(musb); - break; -#endif /* GADGET */ - default: - WARNING("unhandled DISCONNECT transition (%s)\n", - otg_state_string(musb)); - break; - } - - schedule_work(&musb->irq_work); - } - - if (int_usb & MUSB_INTR_SUSPEND) { - DBG(1, "SUSPEND (%s) devctl %02x power %02x\n", - otg_state_string(musb), devctl, power); - handled = IRQ_HANDLED; - - switch (musb->xceiv->state) { -#ifdef CONFIG_USB_MUSB_OTG - case OTG_STATE_A_PERIPHERAL: - /* We also come here if the cable is removed, since - * this silicon doesn't report ID-no-longer-grounded. - * - * We depend on T(a_wait_bcon) to shut us down, and - * hope users don't do anything dicey during this - * undesired detour through A_WAIT_BCON. - */ - musb_hnp_stop(musb); - usb_hcd_resume_root_hub(musb_to_hcd(musb)); - musb_root_disconnect(musb); - musb_platform_try_idle(musb, jiffies - + msecs_to_jiffies(musb->a_wait_bcon - ? : OTG_TIME_A_WAIT_BCON)); - break; -#endif - case OTG_STATE_B_PERIPHERAL: - musb_g_suspend(musb); - musb->is_active = is_otg_enabled(musb) - && musb->xceiv->gadget->b_hnp_enable; - if (musb->is_active) { -#ifdef CONFIG_USB_MUSB_OTG - musb->xceiv->state = OTG_STATE_B_WAIT_ACON; - DBG(1, "HNP: Setting timer for b_ase0_brst\n"); - mod_timer(&musb->otg_timer, jiffies - + msecs_to_jiffies( - OTG_TIME_B_ASE0_BRST)); -#endif - } - break; - case OTG_STATE_A_WAIT_BCON: - if (musb->a_wait_bcon != 0) - musb_platform_try_idle(musb, jiffies - + msecs_to_jiffies(musb->a_wait_bcon)); - break; - case OTG_STATE_A_HOST: - musb->xceiv->state = OTG_STATE_A_SUSPEND; - musb->is_active = is_otg_enabled(musb) - && musb->xceiv->host->b_hnp_enable; - break; - case OTG_STATE_B_HOST: - /* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */ - DBG(1, "REVISIT: SUSPEND as B_HOST\n"); - break; - default: - /* "should not happen" */ - musb->is_active = 0; - break; - } - schedule_work(&musb->irq_work); - } - + schedule_work(&musb->irq_work); return handled; } @@ -1597,11 +1579,6 @@ irqreturn_t musb_interrupt(struct musb *musb) ep_num++; } - /* finish handling "global" interrupts after handling fifos */ - if (musb->int_usb) - retval |= musb_stage2_irq(musb, - musb->int_usb, devctl, power); - return retval; } -- cgit v0.10.2 From 51bf0d0e6cc1f9679a973f61d07cb48e71f9c992 Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Mon, 28 Dec 2009 13:40:41 +0200 Subject: usb: musb: save dynfifo in musb struct Save dynamic FIFO read only information for later uses during musb_save/restore_context functions. Signed-off-by: Ajay Kumar Gupta Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index bd14e81..4c8962f 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1341,8 +1341,10 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb) reg = musb_read_configdata(mbase); strcpy(aInfo, (reg & MUSB_CONFIGDATA_UTMIDW) ? "UTMI-16" : "UTMI-8"); - if (reg & MUSB_CONFIGDATA_DYNFIFO) + if (reg & MUSB_CONFIGDATA_DYNFIFO) { strcat(aInfo, ", dyn FIFOs"); + musb->dyn_fifo = true; + } if (reg & MUSB_CONFIGDATA_MPRXE) { strcat(aInfo, ", bulk combine"); musb->bulk_combine = true; diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 2ac0e6f..eaa0114 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -411,6 +411,7 @@ struct musb { unsigned hb_iso_rx:1; /* high bandwidth iso rx? */ unsigned hb_iso_tx:1; /* high bandwidth iso tx? */ + unsigned dyn_fifo:1; /* dynamic FIFO supported? */ unsigned bulk_split:1; #define can_bulk_split(musb,type) \ -- cgit v0.10.2 From 5fc4e77911f457b6aa910c704eebe3a58d334116 Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Mon, 28 Dec 2009 13:40:42 +0200 Subject: usb: musb: Add 'extvbus' in musb_hdrc_platform_data Some of the board might use external Vbus power supply on musb interface which would require to program ULPI_BUSCONTROL register. Adding 'extvbus' flag which can be set from such boards which will be checked at musb driver files before programming ULPI_BUSCONTROL. Signed-off-by: Ajay Kumar Gupta Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 4c8962f..074d380 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2031,6 +2031,7 @@ bad_config: /* host side needs more setup */ if (is_host_enabled(musb)) { struct usb_hcd *hcd = musb_to_hcd(musb); + u8 busctl; otg_set_host(musb->xceiv, &hcd->self); @@ -2038,6 +2039,13 @@ bad_config: hcd->self.otg_port = 1; musb->xceiv->host = &hcd->self; hcd->power_budget = 2 * (plat->power ? : 250); + + /* program PHY to use external vBus if required */ + if (plat->extvbus) { + busctl = musb_readb(musb->mregs, MUSB_ULPI_BUSCONTROL); + busctl |= MUSB_ULPI_USE_EXTVBUS; + musb_writeb(musb->mregs, MUSB_ULPI_BUSCONTROL, busctl); + } } /* For the host-only role, we can activate right away. diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h index 473a94e..9a8621a 100644 --- a/drivers/usb/musb/musb_regs.h +++ b/drivers/usb/musb/musb_regs.h @@ -72,6 +72,10 @@ #define MUSB_DEVCTL_HR 0x02 #define MUSB_DEVCTL_SESSION 0x01 +/* MUSB ULPI VBUSCONTROL */ +#define MUSB_ULPI_USE_EXTVBUS 0x01 +#define MUSB_ULPI_USE_EXTVBUSIND 0x02 + /* TESTMODE */ #define MUSB_TEST_FORCE_HOST 0x80 #define MUSB_TEST_FIFO_ACCESS 0x40 @@ -246,6 +250,7 @@ /* REVISIT: vctrl/vstatus: optional vendor utmi+phy register at 0x68 */ #define MUSB_HWVERS 0x6C /* 8 bit */ +#define MUSB_ULPI_BUSCONTROL 0x70 /* 8 bit */ #define MUSB_EPINFO 0x78 /* 8 bit */ #define MUSB_RAMINFO 0x79 /* 8 bit */ diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h index d437556..4b7f8fa 100644 --- a/include/linux/usb/musb.h +++ b/include/linux/usb/musb.h @@ -76,6 +76,9 @@ struct musb_hdrc_platform_data { /* (HOST or OTG) msec/2 after VBUS on till power good */ u8 potpgt; + /* (HOST or OTG) program PHY for external Vbus */ + unsigned extvbus:1; + /* Power the device on or off */ int (*set_power)(int state); -- cgit v0.10.2 From d3ae8562d43fe2b97d605dd67dc67bf8fa9b956a Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Mon, 28 Dec 2009 13:40:45 +0200 Subject: usb: host: ehci: fix missing kfree in remove path also Added missing kfree() in ehci_hcd_omap_remove(). Signed-off-by: Ajay Kumar Gupta Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 74d07f4..2460f0d 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -681,6 +681,7 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev) iounmap(omap->tll_base); iounmap(omap->uhh_base); usb_put_hcd(hcd); + kfree(omap); return 0; } -- cgit v0.10.2 From 881142660697bba0f3ef44f070d80632082c978f Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Mon, 28 Dec 2009 13:40:46 +0200 Subject: usb: host: ehci: adding regulator framework in ehci-omap.c driver. OMAP3 has three HS USB ports so it can have three different regulator for each PHY connected to each port. Currently these regulators are assumed to be optional and driver doesn't fail but continue with the initialization if it doesn't get any regulators. Regulator supply names has to be mapped in board files as 'hsusbN' where 'N' is port number and can be {0, 1 ,2}. Signed-off-by: Ajay Kumar Gupta Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 2460f0d..17e4ceb 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -37,6 +37,7 @@ #include #include #include +#include #include /* @@ -178,6 +179,11 @@ struct ehci_hcd_omap { void __iomem *uhh_base; void __iomem *tll_base; void __iomem *ehci_base; + + /* Regulators for USB PHYs. + * Each PHY can have a seperate regulator. + */ + struct regulator *regulator[OMAP3_HS_USB_PORTS]; }; /*-------------------------------------------------------------------------*/ @@ -546,6 +552,8 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) int irq = platform_get_irq(pdev, 0); int ret = -ENODEV; + int i; + char supply[7]; if (!pdata) { dev_dbg(&pdev->dev, "missing platform_data\n"); @@ -613,6 +621,21 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) goto err_tll_ioremap; } + /* get ehci regulator and enable */ + for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) { + if (omap->port_mode[i] != EHCI_HCD_OMAP_MODE_PHY) { + omap->regulator[i] = NULL; + continue; + } + snprintf(supply, sizeof(supply), "hsusb%d", i); + omap->regulator[i] = regulator_get(omap->dev, supply); + if (IS_ERR(omap->regulator[i])) + dev_dbg(&pdev->dev, + "failed to get ehci port%d regulator\n", i); + else + regulator_enable(omap->regulator[i]); + } + ret = omap_start_ehc(omap, hcd); if (ret) { dev_dbg(&pdev->dev, "failed to start ehci\n"); @@ -641,6 +664,12 @@ err_add_hcd: omap_stop_ehc(omap, hcd); err_start: + for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) { + if (omap->regulator[i]) { + regulator_disable(omap->regulator[i]); + regulator_put(omap->regulator[i]); + } + } iounmap(omap->tll_base); err_tll_ioremap: @@ -674,10 +703,17 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev) { struct ehci_hcd_omap *omap = platform_get_drvdata(pdev); struct usb_hcd *hcd = ehci_to_hcd(omap->ehci); + int i; usb_remove_hcd(hcd); omap_stop_ehc(omap, hcd); iounmap(hcd->regs); + for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) { + if (omap->regulator[i]) { + regulator_disable(omap->regulator[i]); + regulator_put(omap->regulator[i]); + } + } iounmap(omap->tll_base); iounmap(omap->uhh_base); usb_put_hcd(hcd); -- cgit v0.10.2 From 6a9b15fed4dca1f90e41ae0cfe35aaa39a20f495 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 28 Dec 2009 23:01:45 +0100 Subject: USB: ch341: replace printk warnings with dev_err Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 59eff72..5e455f4 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -399,8 +399,8 @@ static void ch341_break_ctl(struct tty_struct *tty, int break_state) r = ch341_control_in(port->serial->dev, CH341_REQ_READ_REG, ch341_break_reg, 0, break_reg, sizeof(break_reg)); if (r < 0) { - printk(KERN_WARNING "%s: USB control read error whilst getting" - " break register contents.\n", __FILE__); + dev_err(&port->dev, "%s - USB control read error (%d)\n", + __func__, r); return; } dbg("%s - initial ch341 break register contents - reg1: %x, reg2: %x", @@ -420,8 +420,8 @@ static void ch341_break_ctl(struct tty_struct *tty, int break_state) r = ch341_control_out(port->serial->dev, CH341_REQ_WRITE_REG, ch341_break_reg, reg_contents); if (r < 0) - printk(KERN_WARNING "%s: USB control write error whilst setting" - " break register contents.\n", __FILE__); + dev_err(&port->dev, "%s - USB control write error (%d)\n", + __func__, r); } static int ch341_tiocmset(struct tty_struct *tty, struct file *file, -- cgit v0.10.2 From f2b5cc834b69d2999b749144481de9a94f01bc48 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 28 Dec 2009 23:01:46 +0100 Subject: USB: ch341: fix DMA buffer on stack Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 5e455f4..2942c6d 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -392,16 +392,22 @@ static void ch341_break_ctl(struct tty_struct *tty, int break_state) struct usb_serial_port *port = tty->driver_data; int r; uint16_t reg_contents; - uint8_t break_reg[2]; + uint8_t *break_reg; dbg("%s()", __func__); + break_reg = kmalloc(2, GFP_KERNEL); + if (!break_reg) { + dev_err(&port->dev, "%s - kmalloc failed\n", __func__); + return; + } + r = ch341_control_in(port->serial->dev, CH341_REQ_READ_REG, - ch341_break_reg, 0, break_reg, sizeof(break_reg)); + ch341_break_reg, 0, break_reg, 2); if (r < 0) { dev_err(&port->dev, "%s - USB control read error (%d)\n", __func__, r); - return; + goto out; } dbg("%s - initial ch341 break register contents - reg1: %x, reg2: %x", __func__, break_reg[0], break_reg[1]); @@ -422,6 +428,8 @@ static void ch341_break_ctl(struct tty_struct *tty, int break_state) if (r < 0) dev_err(&port->dev, "%s - USB control write error (%d)\n", __func__, r); +out: + kfree(break_reg); } static int ch341_tiocmset(struct tty_struct *tty, struct file *file, -- cgit v0.10.2 From 52372ccb5a19d35b68b79118fafdced0c12f0ec9 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 28 Dec 2009 23:01:47 +0100 Subject: USB: ch341: use le16_to_cpup to be explicit about endianess Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 2942c6d..4fd01d6 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -422,7 +422,7 @@ static void ch341_break_ctl(struct tty_struct *tty, int break_state) } dbg("%s - New ch341 break register contents - reg1: %x, reg2: %x", __func__, break_reg[0], break_reg[1]); - reg_contents = (uint16_t)break_reg[0] | ((uint16_t)break_reg[1] << 8); + reg_contents = le16_to_cpup((uint16_t *)break_reg); r = ch341_control_out(port->serial->dev, CH341_REQ_WRITE_REG, ch341_break_reg, reg_contents); if (r < 0) -- cgit v0.10.2 From 0954644bf5a5a2281746516ce0f5df988d504c31 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 28 Dec 2009 23:01:48 +0100 Subject: USB: cypress_m8: fix DMA buffer on stack Cc: Lonnie Mendez Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 60c2002..1ce1a3a 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -344,7 +344,8 @@ static int cypress_serial_control(struct tty_struct *tty, { int new_baudrate = 0, retval = 0, tries = 0; struct cypress_private *priv; - __u8 feature_buffer[5]; + u8 *feature_buffer; + const unsigned int feature_len = 5; unsigned long flags; dbg("%s", __func__); @@ -354,6 +355,10 @@ static int cypress_serial_control(struct tty_struct *tty, if (!priv->comm_is_ok) return -ENODEV; + feature_buffer = kcalloc(feature_len, sizeof(u8), GFP_KERNEL); + if (!feature_buffer) + return -ENOMEM; + switch (cypress_request_type) { case CYPRESS_SET_CONFIG: /* 0 means 'Hang up' so doesn't change the true bit rate */ @@ -370,7 +375,6 @@ static int cypress_serial_control(struct tty_struct *tty, dbg("%s - baud rate is being sent as %d", __func__, new_baudrate); - memset(feature_buffer, 0, sizeof(feature_buffer)); /* fill the feature_buffer with new configuration */ *((u_int32_t *)feature_buffer) = new_baudrate; feature_buffer[4] |= data_bits; /* assign data bits in 2 bit space ( max 3 ) */ @@ -394,15 +398,15 @@ static int cypress_serial_control(struct tty_struct *tty, HID_REQ_SET_REPORT, USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS, 0x0300, 0, feature_buffer, - sizeof(feature_buffer), 500); + feature_len, 500); if (tries++ >= 3) break; - } while (retval != sizeof(feature_buffer) && + } while (retval != feature_len && retval != -ENODEV); - if (retval != sizeof(feature_buffer)) { + if (retval != feature_len) { dev_err(&port->dev, "%s - failed sending serial " "line settings - %d\n", __func__, retval); cypress_set_dead(port); @@ -422,30 +426,28 @@ static int cypress_serial_control(struct tty_struct *tty, /* Not implemented for this device, and if we try to do it we're likely to crash the hardware. */ - return -ENOTTY; + retval = -ENOTTY; + goto out; } dbg("%s - retreiving serial line settings", __func__); - /* set initial values in feature buffer */ - memset(feature_buffer, 0, sizeof(feature_buffer)); - do { retval = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), HID_REQ_GET_REPORT, USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS, 0x0300, 0, feature_buffer, - sizeof(feature_buffer), 500); + feature_len, 500); if (tries++ >= 3) break; - } while (retval != sizeof(feature_buffer) + } while (retval != feature_len && retval != -ENODEV); - if (retval != sizeof(feature_buffer)) { + if (retval != feature_len) { dev_err(&port->dev, "%s - failed to retrieve serial " "line settings - %d\n", __func__, retval); cypress_set_dead(port); - return retval; + goto out; } else { spin_lock_irqsave(&priv->lock, flags); /* store the config in one byte, and later @@ -458,7 +460,8 @@ static int cypress_serial_control(struct tty_struct *tty, spin_lock_irqsave(&priv->lock, flags); ++priv->cmd_count; spin_unlock_irqrestore(&priv->lock, flags); - +out: + kfree(feature_buffer); return retval; } /* cypress_serial_control */ -- cgit v0.10.2 From 974fccb7aba8ca4ff887836e26c0ac4c99d041ca Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 28 Dec 2009 23:01:49 +0100 Subject: USB: cypress_m8: fix endianess bug Cc: Lonnie Mendez Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 1ce1a3a..2457165 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -376,7 +376,7 @@ static int cypress_serial_control(struct tty_struct *tty, __func__, new_baudrate); /* fill the feature_buffer with new configuration */ - *((u_int32_t *)feature_buffer) = new_baudrate; + *((u32 *)feature_buffer) = cpu_to_le32(new_baudrate); feature_buffer[4] |= data_bits; /* assign data bits in 2 bit space ( max 3 ) */ /* 1 bit gap */ feature_buffer[4] |= (stop_bits << 3); /* assign stop bits in 1 bit space */ @@ -453,7 +453,7 @@ static int cypress_serial_control(struct tty_struct *tty, /* store the config in one byte, and later use bit masks to check values */ priv->current_config = feature_buffer[4]; - priv->baud_rate = *((u_int32_t *)feature_buffer); + priv->baud_rate = le32_to_cpup((u32 *)feature_buffer); spin_unlock_irqrestore(&priv->lock, flags); } } -- cgit v0.10.2 From e9305d2f4b5ffa9ea0261212d542956bede2a2ff Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 28 Dec 2009 23:01:50 +0100 Subject: USB: io_ti: fix DMA buffers on stack Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index d4cc0f7..1691f07 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -413,11 +413,18 @@ static int write_boot_mem(struct edgeport_serial *serial, { int status = 0; int i; - __u8 temp; + u8 *temp; /* Must do a read before write */ if (!serial->TiReadI2C) { - status = read_boot_mem(serial, 0, 1, &temp); + temp = kmalloc(1, GFP_KERNEL); + if (!temp) { + dev_err(&serial->serial->dev->dev, + "%s - out of memory\n", __func__); + return -ENOMEM; + } + status = read_boot_mem(serial, 0, 1, temp); + kfree(temp); if (status) return status; } @@ -935,37 +942,47 @@ static int build_i2c_fw_hdr(__u8 *header, struct device *dev) static int i2c_type_bootmode(struct edgeport_serial *serial) { int status; - __u8 data; + u8 *data; + + data = kmalloc(1, GFP_KERNEL); + if (!data) { + dev_err(&serial->serial->dev->dev, + "%s - out of memory\n", __func__); + return -ENOMEM; + } /* Try to read type 2 */ status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ, - DTK_ADDR_SPACE_I2C_TYPE_II, 0, &data, 0x01); + DTK_ADDR_SPACE_I2C_TYPE_II, 0, data, 0x01); if (status) dbg("%s - read 2 status error = %d", __func__, status); else - dbg("%s - read 2 data = 0x%x", __func__, data); - if ((!status) && (data == UMP5152 || data == UMP3410)) { + dbg("%s - read 2 data = 0x%x", __func__, *data); + if ((!status) && (*data == UMP5152 || *data == UMP3410)) { dbg("%s - ROM_TYPE_II", __func__); serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II; - return 0; + goto out; } /* Try to read type 3 */ status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ, - DTK_ADDR_SPACE_I2C_TYPE_III, 0, &data, 0x01); + DTK_ADDR_SPACE_I2C_TYPE_III, 0, data, 0x01); if (status) dbg("%s - read 3 status error = %d", __func__, status); else - dbg("%s - read 2 data = 0x%x", __func__, data); - if ((!status) && (data == UMP5152 || data == UMP3410)) { + dbg("%s - read 2 data = 0x%x", __func__, *data); + if ((!status) && (*data == UMP5152 || *data == UMP3410)) { dbg("%s - ROM_TYPE_III", __func__); serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_III; - return 0; + goto out; } dbg("%s - Unknown", __func__); serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II; - return -ENODEV; + status = -ENODEV; +out: + kfree(data); + return status; } static int bulk_xfer(struct usb_serial *serial, void *buffer, @@ -1113,7 +1130,7 @@ static int download_fw(struct edgeport_serial *serial) I2C_DESC_TYPE_FIRMWARE_BASIC, rom_desc); if (start_address != 0) { struct ti_i2c_firmware_rec *firmware_version; - __u8 record; + u8 *record; dbg("%s - Found Type FIRMWARE (Type 2) record", __func__); @@ -1165,6 +1182,15 @@ static int download_fw(struct edgeport_serial *serial) OperationalMajorVersion, OperationalMinorVersion); + record = kmalloc(1, GFP_KERNEL); + if (!record) { + dev_err(dev, "%s - out of memory.\n", + __func__); + kfree(firmware_version); + kfree(rom_desc); + kfree(ti_manuf_desc); + return -ENOMEM; + } /* In order to update the I2C firmware we must * change the type 2 record to type 0xF2. This * will force the UMP to come up in Boot Mode. @@ -1177,13 +1203,14 @@ static int download_fw(struct edgeport_serial *serial) * firmware will update the record type from * 0xf2 to 0x02. */ - record = I2C_DESC_TYPE_FIRMWARE_BLANK; + *record = I2C_DESC_TYPE_FIRMWARE_BLANK; /* Change the I2C Firmware record type to 0xf2 to trigger an update */ status = write_rom(serial, start_address, - sizeof(record), &record); + sizeof(*record), record); if (status) { + kfree(record); kfree(firmware_version); kfree(rom_desc); kfree(ti_manuf_desc); @@ -1196,19 +1223,21 @@ static int download_fw(struct edgeport_serial *serial) */ status = read_rom(serial, start_address, - sizeof(record), - &record); + sizeof(*record), + record); if (status) { + kfree(record); kfree(firmware_version); kfree(rom_desc); kfree(ti_manuf_desc); return status; } - if (record != I2C_DESC_TYPE_FIRMWARE_BLANK) { + if (*record != I2C_DESC_TYPE_FIRMWARE_BLANK) { dev_err(dev, "%s - error resetting device\n", __func__); + kfree(record); kfree(firmware_version); kfree(rom_desc); kfree(ti_manuf_desc); @@ -1226,6 +1255,7 @@ static int download_fw(struct edgeport_serial *serial) __func__, status); /* return an error on purpose. */ + kfree(record); kfree(firmware_version); kfree(rom_desc); kfree(ti_manuf_desc); -- cgit v0.10.2 From ca65d256c8f1604f8ec8e258109d23280687186c Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 28 Dec 2009 23:01:51 +0100 Subject: USB: keyspan_pda: fix DMA buffers on stack Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 1296a09..427d377 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -429,13 +429,20 @@ static int keyspan_pda_get_modem_info(struct usb_serial *serial, unsigned char *value) { int rc; - unsigned char data; + u8 *data; + + data = kmalloc(1, GFP_KERNEL); + if (!data) + return -ENOMEM; + rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), 3, /* get pins */ USB_TYPE_VENDOR|USB_RECIP_INTERFACE|USB_DIR_IN, - 0, 0, &data, 1, 2000); + 0, 0, data, 1, 2000); if (rc >= 0) - *value = data; + *value = *data; + + kfree(data); return rc; } @@ -543,7 +550,14 @@ static int keyspan_pda_write(struct tty_struct *tty, device how much room it really has. This is done only on scheduler time, since usb_control_msg() sleeps. */ if (count > priv->tx_room && !in_interrupt()) { - unsigned char room; + u8 *room; + + room = kmalloc(1, GFP_KERNEL); + if (!room) { + rc = -ENOMEM; + goto exit; + } + rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), 6, /* write_room */ @@ -551,9 +565,14 @@ static int keyspan_pda_write(struct tty_struct *tty, | USB_DIR_IN, 0, /* value: 0 means "remaining room" */ 0, /* index */ - &room, + room, 1, 2000); + if (rc > 0) { + dbg(" roomquery says %d", *room); + priv->tx_room = *room; + } + kfree(room); if (rc < 0) { dbg(" roomquery failed"); goto exit; @@ -563,8 +582,6 @@ static int keyspan_pda_write(struct tty_struct *tty, rc = -EIO; /* device didn't return any data */ goto exit; } - dbg(" roomquery says %d", room); - priv->tx_room = room; } if (count > priv->tx_room) { /* we're about to completely fill the Tx buffer, so @@ -684,18 +701,22 @@ static int keyspan_pda_open(struct tty_struct *tty, struct usb_serial_port *port) { struct usb_serial *serial = port->serial; - unsigned char room; + u8 *room; int rc = 0; struct keyspan_pda_private *priv; /* find out how much room is in the Tx ring */ + room = kmalloc(1, GFP_KERNEL); + if (!room) + return -ENOMEM; + rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), 6, /* write_room */ USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_IN, 0, /* value */ 0, /* index */ - &room, + room, 1, 2000); if (rc < 0) { @@ -708,8 +729,8 @@ static int keyspan_pda_open(struct tty_struct *tty, goto error; } priv = usb_get_serial_port_data(port); - priv->tx_room = room; - priv->tx_throttled = room ? 0 : 1; + priv->tx_room = *room; + priv->tx_throttled = *room ? 0 : 1; /*Start reading from the device*/ port->interrupt_in_urb->dev = serial->dev; @@ -718,8 +739,8 @@ static int keyspan_pda_open(struct tty_struct *tty, dbg("%s - usb_submit_urb(read int) failed", __func__); goto error; } - error: + kfree(room); return rc; } static void keyspan_pda_close(struct usb_serial_port *port) -- cgit v0.10.2 From abf492e7b3ae74873688cf9960283853a3054471 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 28 Dec 2009 23:01:52 +0100 Subject: USB: kl5kusb105: fix DMA buffers on stack Cc: Oliver Neukum Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 3a78738..731964b 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -212,10 +212,19 @@ static int klsi_105_get_line_state(struct usb_serial_port *port, unsigned long *line_state_p) { int rc; - __u8 status_buf[KLSI_STATUSBUF_LEN] = { -1, -1}; + u8 *status_buf; __u16 status; dev_info(&port->serial->dev->dev, "sending SIO Poll request\n"); + + status_buf = kmalloc(KLSI_STATUSBUF_LEN, GFP_KERNEL); + if (!status_buf) { + dev_err(&port->dev, "%s - out of memory for status buffer.\n", + __func__); + return -ENOMEM; + } + status_buf[0] = 0xff; + status_buf[1] = 0xff; rc = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), KL5KUSB105A_SIO_POLL, @@ -236,6 +245,8 @@ static int klsi_105_get_line_state(struct usb_serial_port *port, *line_state_p = klsi_105_status2linestate(status); } + + kfree(status_buf); return rc; } @@ -364,7 +375,7 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port) int rc; int i; unsigned long line_state; - struct klsi_105_port_settings cfg; + struct klsi_105_port_settings *cfg; unsigned long flags; dbg("%s port %d", __func__, port->number); @@ -376,12 +387,18 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port) * Then read the modem line control and store values in * priv->line_state. */ - cfg.pktlen = 5; - cfg.baudrate = kl5kusb105a_sio_b9600; - cfg.databits = kl5kusb105a_dtb_8; - cfg.unknown1 = 0; - cfg.unknown2 = 1; - klsi_105_chg_port_settings(port, &cfg); + cfg = kmalloc(sizeof(*cfg), GFP_KERNEL); + if (!cfg) { + dev_err(&port->dev, "%s - out of memory for config buffer.\n", + __func__); + return -ENOMEM; + } + cfg->pktlen = 5; + cfg->baudrate = kl5kusb105a_sio_b9600; + cfg->databits = kl5kusb105a_dtb_8; + cfg->unknown1 = 0; + cfg->unknown2 = 1; + klsi_105_chg_port_settings(port, cfg); /* set up termios structure */ spin_lock_irqsave(&priv->lock, flags); @@ -391,11 +408,11 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port) priv->termios.c_lflag = tty->termios->c_lflag; for (i = 0; i < NCCS; i++) priv->termios.c_cc[i] = tty->termios->c_cc[i]; - priv->cfg.pktlen = cfg.pktlen; - priv->cfg.baudrate = cfg.baudrate; - priv->cfg.databits = cfg.databits; - priv->cfg.unknown1 = cfg.unknown1; - priv->cfg.unknown2 = cfg.unknown2; + priv->cfg.pktlen = cfg->pktlen; + priv->cfg.baudrate = cfg->baudrate; + priv->cfg.databits = cfg->databits; + priv->cfg.unknown1 = cfg->unknown1; + priv->cfg.unknown2 = cfg->unknown2; spin_unlock_irqrestore(&priv->lock, flags); /* READ_ON and urb submission */ @@ -441,6 +458,7 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port) retval = rc; exit: + kfree(cfg); return retval; } /* klsi_105_open */ @@ -714,10 +732,17 @@ static void klsi_105_set_termios(struct tty_struct *tty, unsigned int old_iflag = old_termios->c_iflag; unsigned int cflag = tty->termios->c_cflag; unsigned int old_cflag = old_termios->c_cflag; - struct klsi_105_port_settings cfg; + struct klsi_105_port_settings *cfg; unsigned long flags; speed_t baud; + cfg = kmalloc(sizeof(*cfg), GFP_KERNEL); + if (!cfg) { + dev_err(&port->dev, "%s - out of memory for config buffer.\n", + __func__); + return; + } + /* lock while we are modifying the settings */ spin_lock_irqsave(&priv->lock, flags); @@ -793,11 +818,11 @@ static void klsi_105_set_termios(struct tty_struct *tty, case CS5: dbg("%s - 5 bits/byte not supported", __func__); spin_unlock_irqrestore(&priv->lock, flags); - return ; + goto err; case CS6: dbg("%s - 6 bits/byte not supported", __func__); spin_unlock_irqrestore(&priv->lock, flags); - return ; + goto err; case CS7: priv->cfg.databits = kl5kusb105a_dtb_7; break; @@ -856,11 +881,13 @@ static void klsi_105_set_termios(struct tty_struct *tty, #endif ; } - memcpy(&cfg, &priv->cfg, sizeof(cfg)); + memcpy(cfg, &priv->cfg, sizeof(*cfg)); spin_unlock_irqrestore(&priv->lock, flags); /* now commit changes to device */ - klsi_105_chg_port_settings(port, &cfg); + klsi_105_chg_port_settings(port, cfg); +err: + kfree(cfg); } /* klsi_105_set_termios */ -- cgit v0.10.2 From eb771e2c6507e0a317e576a3147252ebcb64035a Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 28 Dec 2009 23:01:54 +0100 Subject: USB: mos7720: fix DMA buffers on stack and clean up send_mos_cmd Change data-argument type from (void *) to (u8 *) to prevent endianess problems. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 763e32a..e081dc0 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -275,13 +275,11 @@ static void mos7720_bulk_out_data_callback(struct urb *urb) * this function will be used for sending command to device */ static int send_mos_cmd(struct usb_serial *serial, __u8 request, __u16 value, - __u16 index, void *data) + __u16 index, u8 *data) { int status; - unsigned int pipe; + u8 *buf; u16 product = le16_to_cpu(serial->dev->descriptor.idProduct); - __u8 requesttype; - __u16 size = 0x0000; if (value < MOS_MAX_PORT) { if (product == MOSCHIP_DEVICE_ID_7715) @@ -298,21 +296,23 @@ static int send_mos_cmd(struct usb_serial *serial, __u8 request, __u16 value, } if (request == MOS_WRITE) { - request = (__u8)MOS_WRITE; - requesttype = (__u8)0x40; - value = value + (__u16)*((unsigned char *)data); - data = NULL; - pipe = usb_sndctrlpipe(serial->dev, 0); + value = value + *data; + status = usb_control_msg(serial->dev, + usb_sndctrlpipe(serial->dev, 0), MOS_WRITE, + 0x40, value, index, NULL, 0, MOS_WDR_TIMEOUT); } else { - request = (__u8)MOS_READ; - requesttype = (__u8)0xC0; - size = 0x01; - pipe = usb_rcvctrlpipe(serial->dev, 0); + buf = kmalloc(1, GFP_KERNEL); + if (!buf) { + status = -ENOMEM; + goto out; + } + status = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), MOS_READ, + 0xc0, value, index, buf, 1, MOS_WDR_TIMEOUT); + *data = *buf; + kfree(buf); } - - status = usb_control_msg(serial->dev, pipe, request, requesttype, - value, index, data, size, MOS_WDR_TIMEOUT); - +out: if (status < 0) dbg("Command Write failed Value %x index %x\n", value, index); -- cgit v0.10.2 From 9e221a35f82cbef0397d81fed588bafba95b550c Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 28 Dec 2009 23:01:55 +0100 Subject: USB: mos7840: fix DMA buffers on stack and endianess bugs Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 2cfe245..04bef4b 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -283,12 +283,19 @@ static int mos7840_get_reg_sync(struct usb_serial_port *port, __u16 reg, { struct usb_device *dev = port->serial->dev; int ret = 0; + u8 *buf; + + buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL); + if (!buf) + return -ENOMEM; ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ, - MCS_RD_RTYPE, 0, reg, val, VENDOR_READ_LENGTH, + MCS_RD_RTYPE, 0, reg, buf, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + *val = buf[0]; dbg("mos7840_get_reg_sync offset is %x, return val %x", reg, *val); - *val = (*val) & 0x00ff; + + kfree(buf); return ret; } @@ -341,6 +348,11 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg, struct usb_device *dev = port->serial->dev; int ret = 0; __u16 Wval; + u8 *buf; + + buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL); + if (!buf) + return -ENOMEM; /* dbg("application number is %4x", (((__u16)port->number - (__u16)(port->serial->minor))+1)<<8); */ @@ -364,9 +376,11 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg, } } ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ, - MCS_RD_RTYPE, Wval, reg, val, VENDOR_READ_LENGTH, + MCS_RD_RTYPE, Wval, reg, buf, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); - *val = (*val) & 0x00ff; + *val = buf[0]; + + kfree(buf); return ret; } -- cgit v0.10.2 From d2126326bd71b56fcaa5e86474433d11e253f84d Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 28 Dec 2009 23:01:56 +0100 Subject: USB: oti6858: fix DMA buffer on stack Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index c644e26..2ae97e7 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -302,7 +302,7 @@ void send_data(struct work_struct *work) struct usb_serial_port *port = priv->port; int count = 0, result; unsigned long flags; - unsigned char allow; + u8 *allow; dbg("%s(port = %d)", __func__, port->number); @@ -321,13 +321,20 @@ void send_data(struct work_struct *work) count = port->bulk_out_size; if (count != 0) { + allow = kmalloc(1, GFP_KERNEL); + if (!allow) { + dev_err(&port->dev, "%s(): kmalloc failed\n", + __func__); + return; + } result = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), OTI6858_REQ_T_CHECK_TXBUFF, OTI6858_REQ_CHECK_TXBUFF, - count, 0, &allow, 1, 100); - if (result != 1 || allow != 0) + count, 0, allow, 1, 100); + if (result != 1 || *allow != 0) count = 0; + kfree(allow); } if (count == 0) { -- cgit v0.10.2 From 401711cb575bbbdb100bc1a14cb2024dfc9b4869 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 28 Dec 2009 23:01:57 +0100 Subject: USB: visor: fix DMA buffers on stack Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index ad1f923..178e4d9 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -807,10 +807,14 @@ static int clie_3_5_startup(struct usb_serial *serial) { struct device *dev = &serial->dev->dev; int result; - u8 data; + u8 *data; dbg("%s", __func__); + data = kmalloc(1, GFP_KERNEL); + if (!data) + return -ENOMEM; + /* * Note that PEG-300 series devices expect the following two calls. */ @@ -818,36 +822,42 @@ static int clie_3_5_startup(struct usb_serial *serial) /* get the config number */ result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), USB_REQ_GET_CONFIGURATION, USB_DIR_IN, - 0, 0, &data, 1, 3000); + 0, 0, data, 1, 3000); if (result < 0) { dev_err(dev, "%s: get config number failed: %d\n", __func__, result); - return result; + goto out; } if (result != 1) { dev_err(dev, "%s: get config number bad return length: %d\n", __func__, result); - return -EIO; + result = -EIO; + goto out; } /* get the interface number */ result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), USB_REQ_GET_INTERFACE, USB_DIR_IN | USB_RECIP_INTERFACE, - 0, 0, &data, 1, 3000); + 0, 0, data, 1, 3000); if (result < 0) { dev_err(dev, "%s: get interface number failed: %d\n", __func__, result); - return result; + goto out; } if (result != 1) { dev_err(dev, "%s: get interface number bad return length: %d\n", __func__, result); - return -EIO; + result = -EIO; + goto out; } - return generic_startup(serial); + result = generic_startup(serial); +out: + kfree(data); + + return result; } static int treo_attach(struct usb_serial *serial) -- cgit v0.10.2 From 96679f6bd5e1ccb30671b81636b4fdc326e46d8a Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 28 Dec 2009 23:01:58 +0100 Subject: USB: kobil_sct: clean up kobil_set_termios Kill string that is allocated and generated using speed and parity settings but is never used (and never has been). Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 45ea694..f917c5b 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -624,7 +624,6 @@ static void kobil_set_termios(struct tty_struct *tty, unsigned short urb_val = 0; int c_cflag = tty->termios->c_cflag; speed_t speed; - void *settings; priv = usb_get_serial_port_data(port); if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID || @@ -647,25 +646,13 @@ static void kobil_set_termios(struct tty_struct *tty, } urb_val |= (c_cflag & CSTOPB) ? SUSBCR_SPASB_2StopBits : SUSBCR_SPASB_1StopBit; - - settings = kzalloc(50, GFP_KERNEL); - if (!settings) - return; - - sprintf(settings, "%d ", speed); - if (c_cflag & PARENB) { - if (c_cflag & PARODD) { + if (c_cflag & PARODD) urb_val |= SUSBCR_SPASB_OddParity; - strcat(settings, "Odd Parity"); - } else { + else urb_val |= SUSBCR_SPASB_EvenParity; - strcat(settings, "Even Parity"); - } - } else { + } else urb_val |= SUSBCR_SPASB_NoParity; - strcat(settings, "No Parity"); - } tty->termios->c_cflag &= ~CMSPAR; tty_encode_baud_rate(tty, speed, speed); @@ -675,11 +662,10 @@ static void kobil_set_termios(struct tty_struct *tty, USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, urb_val, 0, - settings, + NULL, 0, KOBIL_TIMEOUT ); - kfree(settings); } static int kobil_ioctl(struct tty_struct *tty, struct file *file, -- cgit v0.10.2 From d0ef90b49857b403c1cfa62fce229c967dd4be40 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 31 Dec 2009 17:42:55 +0200 Subject: USB: serial: fix DMA buffers on stack for io_edgeport.c The original code was passing a stack variable as a dma buffer, so I made it an allocated variable. Instead of adding a bunch of kfree() calls, I changed all the error return paths to gotos. Also I noticed that the error checking wasn't correct because usb_get_descriptor() can return negative values. While I was at it, I made an unrelated white space change by moving the unicode_to_ascii() on to one line. Signed-off-by: Dan Carpenter Cc: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index b97960a..0945600 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -372,31 +372,32 @@ static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial) ************************************************************************/ static int get_string(struct usb_device *dev, int Id, char *string, int buflen) { - struct usb_string_descriptor StringDesc; - struct usb_string_descriptor *pStringDesc; + struct usb_string_descriptor *StringDesc = NULL; + struct usb_string_descriptor *pStringDesc = NULL; + int ret = 0; dbg("%s - USB String ID = %d", __func__, Id); - if (!usb_get_descriptor(dev, USB_DT_STRING, Id, - &StringDesc, sizeof(StringDesc))) - return 0; + StringDesc = kmalloc(sizeof(*StringDesc), GFP_KERNEL); + if (!StringDesc) + goto free; + if (usb_get_descriptor(dev, USB_DT_STRING, Id, StringDesc, sizeof(*StringDesc)) <= 0) + goto free; - pStringDesc = kmalloc(StringDesc.bLength, GFP_KERNEL); + pStringDesc = kmalloc(StringDesc->bLength, GFP_KERNEL); if (!pStringDesc) - return 0; + goto free; - if (!usb_get_descriptor(dev, USB_DT_STRING, Id, - pStringDesc, StringDesc.bLength)) { - kfree(pStringDesc); - return 0; - } - - unicode_to_ascii(string, buflen, - pStringDesc->wData, pStringDesc->bLength/2); + if (usb_get_descriptor(dev, USB_DT_STRING, Id, pStringDesc, StringDesc->bLength) <= 0) + goto free; - kfree(pStringDesc); + unicode_to_ascii(string, buflen, pStringDesc->wData, pStringDesc->bLength/2); + ret = strlen(string); dbg("%s - USB String %s", __func__, string); - return strlen(string); +free: + kfree(StringDesc); + kfree(pStringDesc); + return ret; } -- cgit v0.10.2 From 5be796f0b842c5852d7397a82f8ebd6be8451872 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 31 Dec 2009 16:47:59 +0100 Subject: USB: ch341: use get_unaligned_le16 in break_ctl Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 4fd01d6..6230d24 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -22,6 +22,7 @@ #include #include #include +#include #define DEFAULT_BAUD_RATE 9600 #define DEFAULT_TIMEOUT 1000 @@ -422,7 +423,7 @@ static void ch341_break_ctl(struct tty_struct *tty, int break_state) } dbg("%s - New ch341 break register contents - reg1: %x, reg2: %x", __func__, break_reg[0], break_reg[1]); - reg_contents = le16_to_cpup((uint16_t *)break_reg); + reg_contents = get_unaligned_le16(break_reg); r = ch341_control_out(port->serial->dev, CH341_REQ_WRITE_REG, ch341_break_reg, reg_contents); if (r < 0) -- cgit v0.10.2 From 0f2c2d7bbb51338fdcda9670795a6c6e348622d9 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 31 Dec 2009 16:48:01 +0100 Subject: USB: cypress_m8: use put_unaligned_le32() where necessary Cc: Lonnie Mendez Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 2457165..b19e16a 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -66,6 +66,7 @@ #include #include #include +#include #include "cypress_m8.h" @@ -376,7 +377,7 @@ static int cypress_serial_control(struct tty_struct *tty, __func__, new_baudrate); /* fill the feature_buffer with new configuration */ - *((u32 *)feature_buffer) = cpu_to_le32(new_baudrate); + put_unaligned_le32(new_baudrate, feature_buffer); feature_buffer[4] |= data_bits; /* assign data bits in 2 bit space ( max 3 ) */ /* 1 bit gap */ feature_buffer[4] |= (stop_bits << 3); /* assign stop bits in 1 bit space */ @@ -453,7 +454,7 @@ static int cypress_serial_control(struct tty_struct *tty, /* store the config in one byte, and later use bit masks to check values */ priv->current_config = feature_buffer[4]; - priv->baud_rate = le32_to_cpup((u32 *)feature_buffer); + priv->baud_rate = get_unaligned_le32(feature_buffer); spin_unlock_irqrestore(&priv->lock, flags); } } -- cgit v0.10.2 From 4585ef11d23aa9dbbf776b135ba70577df97587b Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 30 Dec 2009 15:34:37 +0100 Subject: USB: FHCI: Correct the size argument to kzalloc urb_priv->tds has type struct td **, not struct td *, so the elements of the array should have pointer type, not structure type. Convert kzalloc to kcalloc as well. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @disable sizeof_type_expr@ type T; T **x; @@ x = <+...sizeof( - T + *x )...+> // Signed-off-by: Julia Lawall Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c index 78e7c3c..ed4b87c 100644 --- a/drivers/usb/host/fhci-hcd.c +++ b/drivers/usb/host/fhci-hcd.c @@ -433,7 +433,7 @@ static int fhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, return -ENOMEM; /* allocate the private part of the URB */ - urb_priv->tds = kzalloc(size * sizeof(struct td), mem_flags); + urb_priv->tds = kcalloc(size, sizeof(*urb_priv->tds), mem_flags); if (!urb_priv->tds) { kfree(urb_priv); return -ENOMEM; -- cgit v0.10.2 From c38b94017c74061cabc342d3222387e0a5e8b6cd Mon Sep 17 00:00:00 2001 From: Thiago Farina Date: Fri, 1 Jan 2010 16:42:34 -0500 Subject: USB: c67x00: use resource_size(). Signed-off-by: Thiago Farina Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/c67x00/c67x00-drv.c b/drivers/usb/c67x00/c67x00-drv.c index 5633bc5..029ee4a 100644 --- a/drivers/usb/c67x00/c67x00-drv.c +++ b/drivers/usb/c67x00/c67x00-drv.c @@ -137,13 +137,13 @@ static int __devinit c67x00_drv_probe(struct platform_device *pdev) if (!c67x00) return -ENOMEM; - if (!request_mem_region(res->start, res->end - res->start + 1, + if (!request_mem_region(res->start, resource_size(res), pdev->name)) { dev_err(&pdev->dev, "Memory region busy\n"); ret = -EBUSY; goto request_mem_failed; } - c67x00->hpi.base = ioremap(res->start, res->end - res->start + 1); + c67x00->hpi.base = ioremap(res->start, resource_size(res)); if (!c67x00->hpi.base) { dev_err(&pdev->dev, "Unable to map HPI registers\n"); ret = -EIO; @@ -182,7 +182,7 @@ static int __devinit c67x00_drv_probe(struct platform_device *pdev) request_irq_failed: iounmap(c67x00->hpi.base); map_failed: - release_mem_region(res->start, res->end - res->start + 1); + release_mem_region(res->start, resource_size(res)); request_mem_failed: kfree(c67x00); @@ -208,7 +208,7 @@ static int __devexit c67x00_drv_remove(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (res) - release_mem_region(res->start, res->end - res->start + 1); + release_mem_region(res->start, resource_size(res)); kfree(c67x00); -- cgit v0.10.2 From 9c9a7dbf9a73191a24a13b9a0412355254a122c7 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 4 Jan 2010 12:20:17 -0800 Subject: USB: xhci: Fix compile issues with xhci_get_slot_state() Randy Dunlap reported this error when compiling the xHCI driver: linux-next-20100104/drivers/usb/host/xhci.h:1214: sorry, unimplemented: inlining failed in call to 'xhci_get_slot_state': function body not available The xhci_get_slot_state() function belongs in xhci-dbg.c, since it involves debugging internal xHCI structures. However, it is only used in xhci-hcd.c. Some toolchains may have issues since the inlined function body is not in the xhci.h header file. Remove the inline keyword to avoid this. Reported-by: Randy Dunlap Signed-off-by: Sarah Sharp Acked-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index b2915ae..105fa8b 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -406,7 +406,7 @@ static void dbg_rsvd64(struct xhci_hcd *xhci, u64 *ctx, dma_addr_t dma) } } -inline char *xhci_get_slot_state(struct xhci_hcd *xhci, +char *xhci_get_slot_state(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx) { struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 741ece4..e5eb09b 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1210,7 +1210,7 @@ void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst); void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci); void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring); void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int last_ep); -inline char *xhci_get_slot_state(struct xhci_hcd *xhci, +char *xhci_get_slot_state(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx); /* xHCI memory management */ -- cgit v0.10.2 From f358f5b40af67caf28b627889d007294614170b2 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 5 Jan 2010 16:10:13 +0200 Subject: USB: gadget: introduce g_nokia gadget driver g_nokia is the gadget driver implementing WMCDC Wireless Handset Control Model for the N900 device. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index ee41120..7460cd7 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -812,6 +812,16 @@ config USB_CDC_COMPOSITE Say "y" to link the driver statically, or "m" to build a dynamically linked module. +config USB_G_NOKIA + tristate "Nokia composite gadget" + depends on PHONET + help + The Nokia composite gadget provides support for acm, obex + and phonet in only one composite gadget driver. + + It's only really useful for N900 hardware. If you're building + a kernel for N900, say Y or M here. If unsure, say N. + config USB_G_MULTI tristate "Multifunction Composite Gadget (EXPERIMENTAL)" depends on BLOCK && NET diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 2e2c047..43b51da 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -43,6 +43,7 @@ g_mass_storage-objs := mass_storage.o g_printer-objs := printer.o g_cdc-objs := cdc2.o g_multi-objs := multi.o +g_nokia-objs := nokia.o obj-$(CONFIG_USB_ZERO) += g_zero.o obj-$(CONFIG_USB_AUDIO) += g_audio.o @@ -55,4 +56,5 @@ obj-$(CONFIG_USB_G_PRINTER) += g_printer.o obj-$(CONFIG_USB_MIDI_GADGET) += g_midi.o obj-$(CONFIG_USB_CDC_COMPOSITE) += g_cdc.o obj-$(CONFIG_USB_G_MULTI) += g_multi.o +obj-$(CONFIG_USB_G_NOKIA) += g_nokia.o diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c new file mode 100644 index 0000000..7d6b66a --- /dev/null +++ b/drivers/usb/gadget/nokia.c @@ -0,0 +1,259 @@ +/* + * nokia.c -- Nokia Composite Gadget Driver + * + * Copyright (C) 2008-2010 Nokia Corporation + * Contact: Felipe Balbi + * + * This gadget driver borrows from serial.c which is: + * + * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com) + * Copyright (C) 2008 by David Brownell + * Copyright (C) 2008 by Nokia Corporation + * + * This software is distributed under the terms of the GNU General + * Public License ("GPL") as published by the Free Software Foundation, + * version 2 of that License. + */ + +#include +#include +#include + +#include "u_serial.h" +#include "u_ether.h" +#include "u_phonet.h" +#include "gadget_chips.h" + +/* Defines */ + +#define NOKIA_VERSION_NUM 0x0211 +#define NOKIA_LONG_NAME "N900 (PC-Suite Mode)" + +/*-------------------------------------------------------------------------*/ + +/* + * Kbuild is not very cooperative with respect to linking separately + * compiled library objects into one module. So for now we won't use + * separate compilation ... ensuring init/exit sections work to shrink + * the runtime footprint, and giving us at least some parts of what + * a "gcc --combine ... part1.c part2.c part3.c ... " build would. + */ +#include "composite.c" +#include "usbstring.c" +#include "config.c" +#include "epautoconf.c" + +#include "u_serial.c" +#include "f_acm.c" +#include "f_ecm.c" +#include "f_obex.c" +#include "f_serial.c" +#include "f_phonet.c" +#include "u_ether.c" + +/*-------------------------------------------------------------------------*/ + +#define NOKIA_VENDOR_ID 0x0421 /* Nokia */ +#define NOKIA_PRODUCT_ID 0x01c8 /* Nokia Gadget */ + +/* string IDs are assigned dynamically */ + +#define STRING_MANUFACTURER_IDX 0 +#define STRING_PRODUCT_IDX 1 +#define STRING_DESCRIPTION_IDX 2 + +static char manufacturer_nokia[] = "Nokia"; +static const char product_nokia[] = NOKIA_LONG_NAME; +static const char description_nokia[] = "PC-Suite Configuration"; + +static struct usb_string strings_dev[] = { + [STRING_MANUFACTURER_IDX].s = manufacturer_nokia, + [STRING_PRODUCT_IDX].s = NOKIA_LONG_NAME, + [STRING_DESCRIPTION_IDX].s = description_nokia, + { } /* end of list */ +}; + +static struct usb_gadget_strings stringtab_dev = { + .language = 0x0409, /* en-us */ + .strings = strings_dev, +}; + +static struct usb_gadget_strings *dev_strings[] = { + &stringtab_dev, + NULL, +}; + +static struct usb_device_descriptor device_desc = { + .bLength = USB_DT_DEVICE_SIZE, + .bDescriptorType = USB_DT_DEVICE, + .bcdUSB = __constant_cpu_to_le16(0x0200), + .bDeviceClass = USB_CLASS_COMM, + .idVendor = __constant_cpu_to_le16(NOKIA_VENDOR_ID), + .idProduct = __constant_cpu_to_le16(NOKIA_PRODUCT_ID), + /* .iManufacturer = DYNAMIC */ + /* .iProduct = DYNAMIC */ + .bNumConfigurations = 1, +}; + +/*-------------------------------------------------------------------------*/ + +/* Module */ +MODULE_DESCRIPTION("Nokia composite gadget driver for N900"); +MODULE_AUTHOR("Felipe Balbi"); +MODULE_LICENSE("GPL"); + +/*-------------------------------------------------------------------------*/ + +static u8 hostaddr[ETH_ALEN]; + +static int __init nokia_bind_config(struct usb_configuration *c) +{ + int status = 0; + + status = phonet_bind_config(c); + if (status) + printk(KERN_DEBUG "could not bind phonet config\n"); + + status = obex_bind_config(c, 0); + if (status) + printk(KERN_DEBUG "could not bind obex config %d\n", 0); + + status = obex_bind_config(c, 1); + if (status) + printk(KERN_DEBUG "could not bind obex config %d\n", 0); + + status = acm_bind_config(c, 2); + if (status) + printk(KERN_DEBUG "could not bind acm config\n"); + + status = ecm_bind_config(c, hostaddr); + if (status) + printk(KERN_DEBUG "could not bind ecm config\n"); + + return status; +} + +static struct usb_configuration nokia_config_500ma_driver = { + .label = "Bus Powered", + .bind = nokia_bind_config, + .bConfigurationValue = 1, + /* .iConfiguration = DYNAMIC */ + .bmAttributes = USB_CONFIG_ATT_ONE, + .bMaxPower = 250, /* 500mA */ +}; + +static struct usb_configuration nokia_config_100ma_driver = { + .label = "Self Powered", + .bind = nokia_bind_config, + .bConfigurationValue = 2, + /* .iConfiguration = DYNAMIC */ + .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, + .bMaxPower = 50, /* 100 mA */ +}; + +static int __init nokia_bind(struct usb_composite_dev *cdev) +{ + int gcnum; + struct usb_gadget *gadget = cdev->gadget; + int status; + + status = gphonet_setup(cdev->gadget); + if (status < 0) + goto err_phonet; + + status = gserial_setup(cdev->gadget, 3); + if (status < 0) + goto err_serial; + + status = gether_setup(cdev->gadget, hostaddr); + if (status < 0) + goto err_ether; + + status = usb_string_id(cdev); + if (status < 0) + goto err_usb; + strings_dev[STRING_MANUFACTURER_IDX].id = status; + + device_desc.iManufacturer = status; + + status = usb_string_id(cdev); + if (status < 0) + goto err_usb; + strings_dev[STRING_PRODUCT_IDX].id = status; + + device_desc.iProduct = status; + + /* config description */ + status = usb_string_id(cdev); + if (status < 0) + goto err_usb; + strings_dev[STRING_DESCRIPTION_IDX].id = status; + + nokia_config_500ma_driver.iConfiguration = status; + nokia_config_100ma_driver.iConfiguration = status; + + /* set up other descriptors */ + gcnum = usb_gadget_controller_number(gadget); + if (gcnum >= 0) + device_desc.bcdDevice = cpu_to_le16(NOKIA_VERSION_NUM); + else { + /* this should only work with hw that supports altsettings + * and several endpoints, anything else, panic. + */ + pr_err("nokia_bind: controller '%s' not recognized\n", + gadget->name); + goto err_usb; + } + + /* finaly register the configuration */ + status = usb_add_config(cdev, &nokia_config_500ma_driver); + if (status < 0) + goto err_usb; + + status = usb_add_config(cdev, &nokia_config_100ma_driver); + if (status < 0) + goto err_usb; + + dev_info(&gadget->dev, "%s\n", NOKIA_LONG_NAME); + + return 0; + +err_usb: + gether_cleanup(); +err_ether: + gserial_cleanup(); +err_serial: + gphonet_cleanup(); +err_phonet: + return status; +} + +static int __exit nokia_unbind(struct usb_composite_dev *cdev) +{ + gphonet_cleanup(); + gserial_cleanup(); + gether_cleanup(); + + return 0; +} + +static struct usb_composite_driver nokia_driver = { + .name = "g_nokia", + .dev = &device_desc, + .strings = dev_strings, + .bind = nokia_bind, + .unbind = __exit_p(nokia_unbind), +}; + +static int __init nokia_init(void) +{ + return usb_composite_register(&nokia_driver); +} +module_init(nokia_init); + +static void __exit nokia_cleanup(void) +{ + usb_composite_unregister(&nokia_driver); +} +module_exit(nokia_cleanup); + -- cgit v0.10.2 From bce54fed941e03695ab557100a4bd1e457abca42 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 5 Jan 2010 16:10:14 +0200 Subject: arm: defconfig: rx51: enable phonet and g_nokia trivial patch enabling g_nokia on rx51_defconfig. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig index b6eeebb..72e27d8 100644 --- a/arch/arm/configs/rx51_defconfig +++ b/arch/arm/configs/rx51_defconfig @@ -445,6 +445,8 @@ CONFIG_IP_NF_FILTER=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +CONFIG_PHONET=y +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -1325,27 +1327,34 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set # CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set # CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set # CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_AMD5536UDC is not set # CONFIG_USB_GADGET_FSL_QE is not set # CONFIG_USB_GADGET_CI13XXX is not set # CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set CONFIG_USB_GADGET_DUALSPEED=y CONFIG_USB_ZERO=m # CONFIG_USB_ZERO_HNPTEST is not set +# CONFIG_USB_AUDIO is not set # CONFIG_USB_ETH is not set # CONFIG_USB_GADGETFS is not set CONFIG_USB_FILE_STORAGE=m # CONFIG_USB_FILE_STORAGE_TEST is not set +# CONFIG_USB_MASS_STORAGE is not set # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set # CONFIG_USB_CDC_COMPOSITE is not set +CONFIG_USB_G_NOKIA=m +# CONFIG_USB_G_MULTI is not set # # OTG and related infrastructure -- cgit v0.10.2 From 46216e4fbe8c62059b5440dec0b236f386248a41 Mon Sep 17 00:00:00 2001 From: Jan Dumon Date: Tue, 5 Jan 2010 15:53:26 +0100 Subject: USB: unusual_devs: Add support for multiple Option 3G sticks Enable the SD-Card interface on multiple Option 3G sticks. The unusual_devs.h entry is necessary because the device descriptor is vendor-specific. That prevents usb-storage from binding to it as an interface driver. Signed-off-by: Jan Dumon Signed-off-by: Phil Dibowitz Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 49575fba..98b549b 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1147,8 +1147,8 @@ UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000, 0 ), /* Reported by Jan Dumon - * This device (wrongly) has a vendor-specific device descriptor. - * The entry is needed so usb-storage can bind to it's mass-storage + * These devices (wrongly) have a vendor-specific device descriptor. + * These entries are needed so usb-storage can bind to their mass-storage * interface as an interface driver */ UNUSUAL_DEV( 0x0af0, 0x7501, 0x0000, 0x0000, "Option", @@ -1156,6 +1156,90 @@ UNUSUAL_DEV( 0x0af0, 0x7501, 0x0000, 0x0000, US_SC_DEVICE, US_PR_DEVICE, NULL, 0 ), +UNUSUAL_DEV( 0x0af0, 0x7701, 0x0000, 0x0000, + "Option", + "GI 0451 SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0x7706, 0x0000, 0x0000, + "Option", + "GI 0451 SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0x7901, 0x0000, 0x0000, + "Option", + "GI 0452 SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0x7A01, 0x0000, 0x0000, + "Option", + "GI 0461 SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0x7A05, 0x0000, 0x0000, + "Option", + "GI 0461 SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0x8300, 0x0000, 0x0000, + "Option", + "GI 033x SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0x8302, 0x0000, 0x0000, + "Option", + "GI 033x SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0x8304, 0x0000, 0x0000, + "Option", + "GI 033x SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0xc100, 0x0000, 0x0000, + "Option", + "GI 070x SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0xd057, 0x0000, 0x0000, + "Option", + "GI 1505 SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0xd058, 0x0000, 0x0000, + "Option", + "GI 1509 SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0xd157, 0x0000, 0x0000, + "Option", + "GI 1515 SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0xd257, 0x0000, 0x0000, + "Option", + "GI 1215 SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0xd357, 0x0000, 0x0000, + "Option", + "GI 1505 SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + /* Reported by Ben Efros */ UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000, "Seagate", -- cgit v0.10.2 From d837e219daf3bf0cc84fcfb9781807d9fe8d03b5 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Tue, 5 Jan 2010 14:33:29 -0800 Subject: USB: Use bInterfaceNumber in bandwidth allocations. USB devices do not have to sort interfaces in their descriptors based on the interface number, and they may choose to skip interface numbers. The USB bandwidth allocation code for installing a new configuration assumes the for loop variable will match the interface number. Make it use the interface number (bInterfaceNumber) in the descriptor instead. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 80995ef..cf0a098 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1670,11 +1670,16 @@ int usb_hcd_alloc_bandwidth(struct usb_device *udev, } } for (i = 0; i < num_intfs; ++i) { + struct usb_host_interface *first_alt; + int iface_num; + + first_alt = &new_config->intf_cache[i]->altsetting[0]; + iface_num = first_alt->desc.bInterfaceNumber; /* Set up endpoints for alternate interface setting 0 */ - alt = usb_find_alt_setting(new_config, i, 0); + alt = usb_find_alt_setting(new_config, iface_num, 0); if (!alt) /* No alt setting 0? Pick the first setting. */ - alt = &new_config->intf_cache[i]->altsetting[0]; + alt = first_alt; for (j = 0; j < alt->desc.bNumEndpoints; j++) { ret = hcd->driver->add_endpoint(hcd, udev, &alt->endpoint[j]); -- cgit v0.10.2 From 0f3dda9f7ff2db8dbf4d6fbab4d4438251446002 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 8 Jan 2010 12:56:04 -0500 Subject: USB: rearrange code in usb_probe_interface This patch (as1322) reverses the two outcomes of an "if" statement in usb_probe_interface(), to avoid an unnecessary level of indentation. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index f2f055e..fcafb2d 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -274,56 +274,55 @@ static int usb_probe_interface(struct device *dev) intf->needs_binding = 0; if (usb_device_is_owned(udev)) - return -ENODEV; + return error; if (udev->authorized == 0) { dev_err(&intf->dev, "Device is not authorized for usage\n"); - return -ENODEV; + return error; } id = usb_match_id(intf, driver->id_table); if (!id) id = usb_match_dynamic_id(intf, driver); - if (id) { - dev_dbg(dev, "%s - got id\n", __func__); - - error = usb_autoresume_device(udev); - if (error) - return error; + if (!id) + return error; - /* Interface "power state" doesn't correspond to any hardware - * state whatsoever. We use it to record when it's bound to - * a driver that may start I/0: it's not frozen/quiesced. - */ - mark_active(intf); - intf->condition = USB_INTERFACE_BINDING; + dev_dbg(dev, "%s - got id\n", __func__); - /* The interface should always appear to be in use - * unless the driver suports autosuspend. - */ - atomic_set(&intf->pm_usage_cnt, !driver->supports_autosuspend); + error = usb_autoresume_device(udev); + if (error) + return error; - /* Carry out a deferred switch to altsetting 0 */ - if (intf->needs_altsetting0) { - error = usb_set_interface(udev, intf->altsetting[0]. - desc.bInterfaceNumber, 0); - if (error < 0) - goto err; + /* Interface "power state" doesn't correspond to any hardware + * state whatsoever. We use it to record when it's bound to + * a driver that may start I/0: it's not frozen/quiesced. + */ + mark_active(intf); + intf->condition = USB_INTERFACE_BINDING; - intf->needs_altsetting0 = 0; - } + /* The interface should always appear to be in use + * unless the driver suports autosuspend. + */ + atomic_set(&intf->pm_usage_cnt, !driver->supports_autosuspend); - error = driver->probe(intf, id); - if (error) + /* Carry out a deferred switch to altsetting 0 */ + if (intf->needs_altsetting0) { + error = usb_set_interface(udev, intf->altsetting[0]. + desc.bInterfaceNumber, 0); + if (error < 0) goto err; - - intf->condition = USB_INTERFACE_BOUND; - usb_autosuspend_device(udev); + intf->needs_altsetting0 = 0; } + error = driver->probe(intf, id); + if (error) + goto err; + + intf->condition = USB_INTERFACE_BOUND; + usb_autosuspend_device(udev); return error; -err: + err: mark_quiesced(intf); intf->needs_remote_wakeup = 0; intf->condition = USB_INTERFACE_UNBOUND; -- cgit v0.10.2 From 62e299e61a6ffe8131fa85a984c3058b68586f5d Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 8 Jan 2010 12:56:19 -0500 Subject: USB: change locking for device-level autosuspend This patch (as1323) changes the locking requirements for usb_autosuspend_device(), usb_autoresume_device(), and usb_try_autosuspend_device(). This isn't a very important change; mainly it's meant to make the locking more uniform. The most tricky part of the patch involves changes to usbdev_open(). To avoid an ABBA locking problem, it was necessary to reduce the region protected by usbfs_mutex. Since that mutex now protects only against simultaneous open and remove, this posed no difficulty -- its scope was larger than necessary. And it turns out that usbfs_mutex is no longer needed in usbdev_release() at all. The list of usbfs "ps" structures is now protected by the device lock instead of by usbfs_mutex. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 431d172..825e0ab 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -654,19 +654,21 @@ static int usbdev_open(struct inode *inode, struct file *file) int ret; lock_kernel(); - /* Protect against simultaneous removal or release */ - mutex_lock(&usbfs_mutex); ret = -ENOMEM; ps = kmalloc(sizeof(struct dev_state), GFP_KERNEL); if (!ps) - goto out; + goto out_free_ps; ret = -ENODEV; + /* Protect against simultaneous removal or release */ + mutex_lock(&usbfs_mutex); + /* usbdev device-node */ if (imajor(inode) == USB_DEVICE_MAJOR) dev = usbdev_lookup_by_devt(inode->i_rdev); + #ifdef CONFIG_USB_DEVICEFS /* procfs file */ if (!dev) { @@ -678,13 +680,19 @@ static int usbdev_open(struct inode *inode, struct file *file) dev = NULL; } #endif - if (!dev || dev->state == USB_STATE_NOTATTACHED) - goto out; + mutex_unlock(&usbfs_mutex); + + if (!dev) + goto out_free_ps; + + usb_lock_device(dev); + if (dev->state == USB_STATE_NOTATTACHED) + goto out_unlock_device; + ret = usb_autoresume_device(dev); if (ret) - goto out; + goto out_unlock_device; - ret = 0; ps->dev = dev; ps->file = file; spin_lock_init(&ps->lock); @@ -702,14 +710,17 @@ static int usbdev_open(struct inode *inode, struct file *file) smp_wmb(); list_add_tail(&ps->list, &dev->filelist); file->private_data = ps; + usb_unlock_device(dev); snoop(&dev->dev, "opened by process %d: %s\n", task_pid_nr(current), current->comm); - out: - if (ret) { - kfree(ps); - usb_put_dev(dev); - } - mutex_unlock(&usbfs_mutex); + unlock_kernel(); + return ret; + + out_unlock_device: + usb_unlock_device(dev); + usb_put_dev(dev); + out_free_ps: + kfree(ps); unlock_kernel(); return ret; } @@ -724,10 +735,7 @@ static int usbdev_release(struct inode *inode, struct file *file) usb_lock_device(dev); usb_hub_release_all_ports(dev, ps); - /* Protect against simultaneous open */ - mutex_lock(&usbfs_mutex); list_del_init(&ps->list); - mutex_unlock(&usbfs_mutex); for (ifnum = 0; ps->ifclaimed && ifnum < 8*sizeof(ps->ifclaimed); ifnum++) { diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index fcafb2d..2b39583 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1478,8 +1478,7 @@ void usb_autoresume_work(struct work_struct *work) * driver requires remote-wakeup capability during autosuspend but remote * wakeup is disabled, the autosuspend will fail. * - * Often the caller will hold @udev's device lock, but this is not - * necessary. + * The caller must hold @udev's device lock. * * This routine can run only in process context. */ @@ -1503,6 +1502,8 @@ void usb_autosuspend_device(struct usb_device *udev) * for an active interface is greater than 0, or autosuspend is not allowed * for any other reason, no autosuspend request will be queued. * + * The caller must hold @udev's device lock. + * * This routine can run only in process context. */ void usb_try_autosuspend_device(struct usb_device *udev) @@ -1526,8 +1527,7 @@ void usb_try_autosuspend_device(struct usb_device *udev) * @udev's usage counter is incremented to prevent subsequent autosuspends. * However if the autoresume fails then the usage counter is re-decremented. * - * Often the caller will hold @udev's device lock, but this is not - * necessary (and attempting it might cause deadlock). + * The caller must hold @udev's device lock. * * This routine can run only in process context. */ diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 1b3c00b..d8f3bfe 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -352,6 +352,7 @@ set_autosuspend(struct device *dev, struct device_attribute *attr, return -EINVAL; value *= HZ; + usb_lock_device(udev); udev->autosuspend_delay = value; if (value >= 0) usb_try_autosuspend_device(udev); @@ -359,6 +360,7 @@ set_autosuspend(struct device *dev, struct device_attribute *attr, if (usb_autoresume_device(udev) == 0) usb_autosuspend_device(udev); } + usb_unlock_device(udev); return count; } -- cgit v0.10.2 From 0534d46848990e8eed7cd0832d745d813e827261 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 8 Jan 2010 12:56:30 -0500 Subject: USB: consolidate remote wakeup routines This patch (as1324) makes a small change to the code used for remote wakeup of root hubs. hcd_resume_work() now calls the hub driver's remote-wakeup routine instead of implementing its own version. The patch is complicated by the need to rename remote_wakeup() to usb_remote_wakeup(), make it non-static, and declare it in a header file. There's also the additional complication required to make everything work when CONFIG_PM isn't set; the do-nothing inline routine had to be moved into the header file. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index cf0a098..fc4290b 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1865,8 +1865,7 @@ static void hcd_resume_work(struct work_struct *work) struct usb_device *udev = hcd->self.root_hub; usb_lock_device(udev); - usb_mark_last_busy(udev); - usb_external_resume_device(udev, PMSG_REMOTE_RESUME); + usb_remote_wakeup(udev); usb_unlock_device(udev); } diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 4986ff6..bfa6123 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2399,7 +2399,7 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) } /* caller has locked udev */ -static int remote_wakeup(struct usb_device *udev) +int usb_remote_wakeup(struct usb_device *udev) { int status = 0; @@ -2443,7 +2443,7 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) return status; } -static inline int remote_wakeup(struct usb_device *udev) +int usb_remote_wakeup(struct usb_device *udev) { return 0; } @@ -2514,11 +2514,6 @@ EXPORT_SYMBOL_GPL(usb_root_hub_lost_power); #else /* CONFIG_PM */ -static inline int remote_wakeup(struct usb_device *udev) -{ - return 0; -} - #define hub_suspend NULL #define hub_resume NULL #define hub_reset_resume NULL @@ -3017,7 +3012,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, /* For a suspended device, treat this as a * remote wakeup event. */ - status = remote_wakeup(udev); + status = usb_remote_wakeup(udev); #endif } else { @@ -3363,7 +3358,7 @@ static void hub_events(void) msleep(10); usb_lock_device(udev); - ret = remote_wakeup(hdev-> + ret = usb_remote_wakeup(hdev-> children[i-1]); usb_unlock_device(udev); if (ret < 0) diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 4c36c7f..2b74a7f 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -63,6 +63,7 @@ extern int usb_external_suspend_device(struct usb_device *udev, pm_message_t msg); extern int usb_external_resume_device(struct usb_device *udev, pm_message_t msg); +extern int usb_remote_wakeup(struct usb_device *dev); static inline void usb_pm_lock(struct usb_device *udev) { @@ -86,6 +87,11 @@ static inline int usb_port_resume(struct usb_device *udev, pm_message_t msg) return 0; } +static inline int usb_remote_wakeup(struct usb_device *udev) +{ + return 0; +} + static inline void usb_pm_lock(struct usb_device *udev) {} static inline void usb_pm_unlock(struct usb_device *udev) {} -- cgit v0.10.2 From 0c4db6df915bc470f0cd32fe48287fa6eb6adfb4 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 8 Jan 2010 12:56:42 -0500 Subject: USB: use the device lock for persist_enabled This patch (as1325) changes the locking for the persist_enabled flag in struct usb_device. Now it is protected by the device lock, along with all its neighboring bit flags, instead of the PM lock (which is about to vanish anyway). Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index d8f3bfe..5a1a0e2 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -256,9 +256,10 @@ set_persist(struct device *dev, struct device_attribute *attr, if (sscanf(buf, "%d", &value) != 1) return -EINVAL; - usb_pm_lock(udev); + + usb_lock_device(udev); udev->persist_enabled = !!value; - usb_pm_unlock(udev); + usb_unlock_device(udev); return count; } -- cgit v0.10.2 From 088f7fec8a0e683db72fd8826c5d3ab914e197b1 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 8 Jan 2010 12:56:54 -0500 Subject: USB: implement usb_enable_autosuspend This patch (as1326) adds usb_enable_autosuspend() and usb_disable_autosuspend() routines for use by drivers. If a driver knows that its device can handle suspends and resumes correctly, it can enable autosuspend all by itself. This is equivalent to the user writing "auto" to the device's power/level attribute. The implementation differs slightly from what it used to be. Now autosuspend is disabled simply by doing usb_autoresume_device() (to increment the usage counter) and enabled by doing usb_autosuspend_device() (to decrement the usage counter). The set_level() attribute method is updated to use the new routines, and the USB Power-Management documentation is updated. The patch adds a usb_enable_autosuspend() call to the hub driver's probe routine, allowing the special-case code for hubs in quirks.c to be removed. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt index 3bf6818..e3fa189 100644 --- a/Documentation/usb/power-management.txt +++ b/Documentation/usb/power-management.txt @@ -229,6 +229,11 @@ necessary operations by hand or add them to a udev script. You can also change the idle-delay time; 2 seconds is not the best choice for every device. +If a driver knows that its device has proper suspend/resume support, +it can enable autosuspend all by itself. For example, the video +driver for a laptop's webcam might do this, since these devices are +rarely used and so should normally be autosuspended. + Sometimes it turns out that even when a device does work okay with autosuspend there are still problems. For example, there are experimental patches adding autosuspend support to the usbhid driver, @@ -384,6 +389,19 @@ autosuspend, there's no delay for an autoresume. Other parts of the driver interface ----------------------------------- +Drivers can enable autosuspend for their devices by calling + + usb_enable_autosuspend(struct usb_device *udev); + +in their probe() routine, if they know that the device is capable of +suspending and resuming correctly. This is exactly equivalent to +writing "auto" to the device's power/level attribute. Likewise, +drivers can disable autosuspend by calling + + usb_disable_autosuspend(struct usb_device *udev); + +This is exactly the same as writing "on" to the power/level attribute. + Sometimes a driver needs to make sure that remote wakeup is enabled during autosuspend. For example, there's not much point autosuspending a keyboard if the user can't cause the keyboard to do a diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 2b39583..057eeab 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1415,6 +1415,48 @@ static int usb_resume_both(struct usb_device *udev, pm_message_t msg) #ifdef CONFIG_USB_SUSPEND +/** + * usb_enable_autosuspend - allow a USB device to be autosuspended + * @udev: the USB device which may be autosuspended + * + * This routine allows @udev to be autosuspended. An autosuspend won't + * take place until the autosuspend_delay has elapsed and all the other + * necessary conditions are satisfied. + * + * The caller must hold @udev's device lock. + */ +int usb_enable_autosuspend(struct usb_device *udev) +{ + if (udev->autosuspend_disabled) { + udev->autosuspend_disabled = 0; + usb_autosuspend_device(udev); + } + return 0; +} +EXPORT_SYMBOL_GPL(usb_enable_autosuspend); + +/** + * usb_disable_autosuspend - prevent a USB device from being autosuspended + * @udev: the USB device which may not be autosuspended + * + * This routine prevents @udev from being autosuspended and wakes it up + * if it is already autosuspended. + * + * The caller must hold @udev's device lock. + */ +int usb_disable_autosuspend(struct usb_device *udev) +{ + int rc = 0; + + if (!udev->autosuspend_disabled) { + rc = usb_autoresume_device(udev); + if (rc == 0) + udev->autosuspend_disabled = 1; + } + return rc; +} +EXPORT_SYMBOL_GPL(usb_disable_autosuspend); + /* Internal routine to adjust a device's usage counter and change * its autosuspend state. */ diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index bfa6123..746f26f 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1224,6 +1224,9 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) desc = intf->cur_altsetting; hdev = interface_to_usbdev(intf); + /* Hubs have proper suspend/resume support */ + usb_enable_autosuspend(hdev); + if (hdev->level == MAX_TOPO_LEVEL) { dev_err(&intf->dev, "Unsupported bus topology: hub nested too deep\n"); diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 0b68922..4314f25 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -103,11 +103,10 @@ void usb_detect_quirks(struct usb_device *udev) dev_dbg(&udev->dev, "USB quirks for this device: %x\n", udev->quirks); - /* By default, disable autosuspend for all non-hubs */ -#ifdef CONFIG_USB_SUSPEND - if (udev->descriptor.bDeviceClass != USB_CLASS_HUB) - udev->autosuspend_disabled = 1; -#endif + /* By default, disable autosuspend for all devices. The hub driver + * will enable it for hubs. + */ + usb_disable_autosuspend(udev); /* For the present, all devices default to USB-PERSIST enabled */ #if 0 /* was: #ifdef CONFIG_PM */ diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 5a1a0e2..313e241 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -389,34 +389,25 @@ set_level(struct device *dev, struct device_attribute *attr, struct usb_device *udev = to_usb_device(dev); int len = count; char *cp; - int rc = 0; - int old_autosuspend_disabled; + int rc; cp = memchr(buf, '\n', count); if (cp) len = cp - buf; usb_lock_device(udev); - old_autosuspend_disabled = udev->autosuspend_disabled; - /* Setting the flags without calling usb_pm_lock is a subject to - * races, but who cares... - */ if (len == sizeof on_string - 1 && - strncmp(buf, on_string, len) == 0) { - udev->autosuspend_disabled = 1; - rc = usb_external_resume_device(udev, PMSG_USER_RESUME); + strncmp(buf, on_string, len) == 0) + rc = usb_disable_autosuspend(udev); - } else if (len == sizeof auto_string - 1 && - strncmp(buf, auto_string, len) == 0) { - udev->autosuspend_disabled = 0; - rc = usb_external_resume_device(udev, PMSG_USER_RESUME); + else if (len == sizeof auto_string - 1 && + strncmp(buf, auto_string, len) == 0) + rc = usb_enable_autosuspend(udev); - } else + else rc = -EINVAL; - if (rc) - udev->autosuspend_disabled = old_autosuspend_disabled; usb_unlock_device(udev); return (rc < 0 ? rc : count); } diff --git a/include/linux/usb.h b/include/linux/usb.h index 332eaea..e6419ac 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -542,6 +542,9 @@ extern struct usb_device *usb_find_device(u16 vendor_id, u16 product_id); /* USB autosuspend and autoresume */ #ifdef CONFIG_USB_SUSPEND +extern int usb_enable_autosuspend(struct usb_device *udev); +extern int usb_disable_autosuspend(struct usb_device *udev); + extern int usb_autopm_get_interface(struct usb_interface *intf); extern void usb_autopm_put_interface(struct usb_interface *intf); extern int usb_autopm_get_interface_async(struct usb_interface *intf); @@ -565,6 +568,11 @@ static inline void usb_mark_last_busy(struct usb_device *udev) #else +static inline int usb_enable_autosuspend(struct usb_device *udev) +{ return 0; } +static inline int usb_disable_autosuspend(struct usb_device *udev) +{ return 0; } + static inline int usb_autopm_get_interface(struct usb_interface *intf) { return 0; } static inline int usb_autopm_get_interface_async(struct usb_interface *intf) -- cgit v0.10.2 From 5899f1e020c8d53b2b6fbd6a6cf39c891ccdfade Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 8 Jan 2010 12:57:02 -0500 Subject: USB: change handling of negative autosuspend delays This patch (as1327) changes the way negative autosuspend delays prevent device from autosuspending. The current code checks for negative values explicitly in the autosuspend_check() routine. The updated code keeps things from getting that far by using usb_autoresume_device() to increment the usage counter when a negative delay is set, and by using usb_autosuspend_device() to decrement the usage counter when a non-negative delay is set. This complicates the set_autosuspend() attribute method code slightly, but it will reduce the overall power management overhead. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 4314f25..f073c5c 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -103,11 +103,21 @@ void usb_detect_quirks(struct usb_device *udev) dev_dbg(&udev->dev, "USB quirks for this device: %x\n", udev->quirks); +#ifdef CONFIG_USB_SUSPEND + /* By default, disable autosuspend for all devices. The hub driver * will enable it for hubs. */ usb_disable_autosuspend(udev); + /* Autosuspend can also be disabled if the initial autosuspend_delay + * is negative. + */ + if (udev->autosuspend_delay < 0) + usb_autoresume_device(udev); + +#endif + /* For the present, all devices default to USB-PERSIST enabled */ #if 0 /* was: #ifdef CONFIG_PM */ /* Hubs are automatically enabled for USB-PERSIST */ diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 313e241..43c002e 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -346,7 +346,8 @@ set_autosuspend(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct usb_device *udev = to_usb_device(dev); - int value; + int value, old_delay; + int rc; if (sscanf(buf, "%d", &value) != 1 || value >= INT_MAX/HZ || value <= - INT_MAX/HZ) @@ -354,13 +355,24 @@ set_autosuspend(struct device *dev, struct device_attribute *attr, value *= HZ; usb_lock_device(udev); + old_delay = udev->autosuspend_delay; udev->autosuspend_delay = value; - if (value >= 0) - usb_try_autosuspend_device(udev); - else { - if (usb_autoresume_device(udev) == 0) + + if (old_delay < 0) { /* Autosuspend wasn't allowed */ + if (value >= 0) usb_autosuspend_device(udev); + } else { /* Autosuspend was allowed */ + if (value < 0) { + rc = usb_autoresume_device(udev); + if (rc < 0) { + count = rc; + udev->autosuspend_delay = old_delay; + } + } else { + usb_try_autosuspend_device(udev); + } } + usb_unlock_device(udev); return count; } -- cgit v0.10.2 From 0c590e2361511997430130e10e372217c1128da6 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 8 Jan 2010 12:57:14 -0500 Subject: USB: rearrange functions in driver.c This patch (as1328) reorders the functions in drivers/usb/core/driver.c so as to put all the routines dependent on CONFIG_PM in one place. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 057eeab..638d546 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1413,6 +1413,109 @@ static int usb_resume_both(struct usb_device *udev, pm_message_t msg) return status; } +/** + * usb_external_suspend_device - external suspend of a USB device and its interfaces + * @udev: the usb_device to suspend + * @msg: Power Management message describing this state transition + * + * This routine handles external suspend requests: ones not generated + * internally by a USB driver (autosuspend) but rather coming from the user + * (via sysfs) or the PM core (system sleep). The suspend will be carried + * out regardless of @udev's usage counter or those of its interfaces, + * and regardless of whether or not remote wakeup is enabled. Of course, + * interface drivers still have the option of failing the suspend (if + * there are unsuspended children, for example). + * + * The caller must hold @udev's device lock. + */ +int usb_external_suspend_device(struct usb_device *udev, pm_message_t msg) +{ + int status; + + do_unbind_rebind(udev, DO_UNBIND); + usb_pm_lock(udev); + status = usb_suspend_both(udev, msg); + usb_pm_unlock(udev); + return status; +} + +/** + * usb_external_resume_device - external resume of a USB device and its interfaces + * @udev: the usb_device to resume + * @msg: Power Management message describing this state transition + * + * This routine handles external resume requests: ones not generated + * internally by a USB driver (autoresume) but rather coming from the user + * (via sysfs), the PM core (system resume), or the device itself (remote + * wakeup). @udev's usage counter is unaffected. + * + * The caller must hold @udev's device lock. + */ +int usb_external_resume_device(struct usb_device *udev, pm_message_t msg) +{ + int status; + + usb_pm_lock(udev); + status = usb_resume_both(udev, msg); + udev->last_busy = jiffies; + usb_pm_unlock(udev); + if (status == 0) + do_unbind_rebind(udev, DO_REBIND); + + /* Now that the device is awake, we can start trying to autosuspend + * it again. */ + if (status == 0) + usb_try_autosuspend_device(udev); + return status; +} + +int usb_suspend(struct device *dev, pm_message_t msg) +{ + struct usb_device *udev; + + udev = to_usb_device(dev); + + /* If udev is already suspended, we can skip this suspend and + * we should also skip the upcoming system resume. High-speed + * root hubs are an exception; they need to resume whenever the + * system wakes up in order for USB-PERSIST port handover to work + * properly. + */ + if (udev->state == USB_STATE_SUSPENDED) { + if (udev->parent || udev->speed != USB_SPEED_HIGH) + udev->skip_sys_resume = 1; + return 0; + } + + udev->skip_sys_resume = 0; + return usb_external_suspend_device(udev, msg); +} + +int usb_resume(struct device *dev, pm_message_t msg) +{ + struct usb_device *udev; + int status; + + udev = to_usb_device(dev); + + /* If udev->skip_sys_resume is set then udev was already suspended + * when the system sleep started, so we don't want to resume it + * during this system wakeup. + */ + if (udev->skip_sys_resume) + return 0; + status = usb_external_resume_device(udev, msg); + + /* Avoid PM error messages for devices disconnected while suspended + * as we'll display regular disconnect messages just a bit later. + */ + if (status == -ENODEV) + return 0; + return status; +} + +#endif /* CONFIG_PM */ + #ifdef CONFIG_USB_SUSPEND /** @@ -1784,109 +1887,6 @@ void usb_autoresume_work(struct work_struct *work) #endif /* CONFIG_USB_SUSPEND */ -/** - * usb_external_suspend_device - external suspend of a USB device and its interfaces - * @udev: the usb_device to suspend - * @msg: Power Management message describing this state transition - * - * This routine handles external suspend requests: ones not generated - * internally by a USB driver (autosuspend) but rather coming from the user - * (via sysfs) or the PM core (system sleep). The suspend will be carried - * out regardless of @udev's usage counter or those of its interfaces, - * and regardless of whether or not remote wakeup is enabled. Of course, - * interface drivers still have the option of failing the suspend (if - * there are unsuspended children, for example). - * - * The caller must hold @udev's device lock. - */ -int usb_external_suspend_device(struct usb_device *udev, pm_message_t msg) -{ - int status; - - do_unbind_rebind(udev, DO_UNBIND); - usb_pm_lock(udev); - status = usb_suspend_both(udev, msg); - usb_pm_unlock(udev); - return status; -} - -/** - * usb_external_resume_device - external resume of a USB device and its interfaces - * @udev: the usb_device to resume - * @msg: Power Management message describing this state transition - * - * This routine handles external resume requests: ones not generated - * internally by a USB driver (autoresume) but rather coming from the user - * (via sysfs), the PM core (system resume), or the device itself (remote - * wakeup). @udev's usage counter is unaffected. - * - * The caller must hold @udev's device lock. - */ -int usb_external_resume_device(struct usb_device *udev, pm_message_t msg) -{ - int status; - - usb_pm_lock(udev); - status = usb_resume_both(udev, msg); - udev->last_busy = jiffies; - usb_pm_unlock(udev); - if (status == 0) - do_unbind_rebind(udev, DO_REBIND); - - /* Now that the device is awake, we can start trying to autosuspend - * it again. */ - if (status == 0) - usb_try_autosuspend_device(udev); - return status; -} - -int usb_suspend(struct device *dev, pm_message_t msg) -{ - struct usb_device *udev; - - udev = to_usb_device(dev); - - /* If udev is already suspended, we can skip this suspend and - * we should also skip the upcoming system resume. High-speed - * root hubs are an exception; they need to resume whenever the - * system wakes up in order for USB-PERSIST port handover to work - * properly. - */ - if (udev->state == USB_STATE_SUSPENDED) { - if (udev->parent || udev->speed != USB_SPEED_HIGH) - udev->skip_sys_resume = 1; - return 0; - } - - udev->skip_sys_resume = 0; - return usb_external_suspend_device(udev, msg); -} - -int usb_resume(struct device *dev, pm_message_t msg) -{ - struct usb_device *udev; - int status; - - udev = to_usb_device(dev); - - /* If udev->skip_sys_resume is set then udev was already suspended - * when the system sleep started, so we don't want to resume it - * during this system wakeup. - */ - if (udev->skip_sys_resume) - return 0; - status = usb_external_resume_device(udev, msg); - - /* Avoid PM error messages for devices disconnected while suspended - * as we'll display regular disconnect messages just a bit later. - */ - if (status == -ENODEV) - return 0; - return status; -} - -#endif /* CONFIG_PM */ - struct bus_type usb_bus_type = { .name = "usb", .match = usb_device_match, -- cgit v0.10.2 From 9bbdf1e0afe771ca7650f9f476769310bee9d8f3 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 8 Jan 2010 12:57:28 -0500 Subject: USB: convert to the runtime PM framework This patch (as1329) converts the USB stack over to the PM core's runtime PM framework. This involves numerous changes throughout usbcore, especially to hub.c and driver.c. Perhaps the most notable change is that CONFIG_USB_SUSPEND now depends on CONFIG_PM_RUNTIME instead of CONFIG_PM. Several fields in the usb_device and usb_interface structures are no longer needed. Some code which used to depend on CONFIG_USB_PM now depends on CONFIG_USB_SUSPEND (requiring some rearrangement of header files). The only visible change in behavior should be that following a system sleep (resume from RAM or resume from hibernation), autosuspended USB devices will be resumed just like everything else. They won't remain suspended. But if they aren't in use then they will naturally autosuspend again in a few seconds. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt index e3fa189..2790ad4 100644 --- a/Documentation/usb/power-management.txt +++ b/Documentation/usb/power-management.txt @@ -2,7 +2,7 @@ Alan Stern - November 10, 2009 + December 11, 2009 @@ -29,9 +29,9 @@ covered to some extent (see Documentation/power/*.txt for more information about system PM). Note: Dynamic PM support for USB is present only if the kernel was -built with CONFIG_USB_SUSPEND enabled. System PM support is present -only if the kernel was built with CONFIG_SUSPEND or CONFIG_HIBERNATION -enabled. +built with CONFIG_USB_SUSPEND enabled (which depends on +CONFIG_PM_RUNTIME). System PM support is present only if the kernel +was built with CONFIG_SUSPEND or CONFIG_HIBERNATION enabled. What is Remote Wakeup? @@ -326,64 +326,63 @@ driver does so by calling these six functions: void usb_autopm_get_interface_no_resume(struct usb_interface *intf); void usb_autopm_put_interface_no_suspend(struct usb_interface *intf); -The functions work by maintaining a counter in the usb_interface -structure. When intf->pm_usage_count is > 0 then the interface is -deemed to be busy, and the kernel will not autosuspend the interface's -device. When intf->pm_usage_count is <= 0 then the interface is -considered to be idle, and the kernel may autosuspend the device. +The functions work by maintaining a usage counter in the +usb_interface's embedded device structure. When the counter is > 0 +then the interface is deemed to be busy, and the kernel will not +autosuspend the interface's device. When the usage counter is = 0 +then the interface is considered to be idle, and the kernel may +autosuspend the device. -(There is a similar pm_usage_count field in struct usb_device, +(There is a similar usage counter field in struct usb_device, associated with the device itself rather than any of its interfaces. -This field is used only by the USB core.) - -Drivers must not modify intf->pm_usage_count directly; its value -should be changed only be using the functions listed above. Drivers -are responsible for insuring that the overall change to pm_usage_count -during their lifetime balances out to 0 (it may be necessary for the -disconnect method to call usb_autopm_put_interface() one or more times -to fulfill this requirement). The first two routines use the PM mutex -in struct usb_device for mutual exclusion; drivers using the async -routines are responsible for their own synchronization and mutual -exclusion. - - usb_autopm_get_interface() increments pm_usage_count and - attempts an autoresume if the new value is > 0 and the - device is suspended. - - usb_autopm_put_interface() decrements pm_usage_count and - attempts an autosuspend if the new value is <= 0 and the - device isn't suspended. +This counter is used only by the USB core.) + +Drivers need not be concerned about balancing changes to the usage +counter; the USB core will undo any remaining "get"s when a driver +is unbound from its interface. As a corollary, drivers must not call +any of the usb_autopm_* functions after their diconnect() routine has +returned. + +Drivers using the async routines are responsible for their own +synchronization and mutual exclusion. + + usb_autopm_get_interface() increments the usage counter and + does an autoresume if the device is suspended. If the + autoresume fails, the counter is decremented back. + + usb_autopm_put_interface() decrements the usage counter and + attempts an autosuspend if the new value is = 0. usb_autopm_get_interface_async() and usb_autopm_put_interface_async() do almost the same things as - their non-async counterparts. The differences are: they do - not acquire the PM mutex, and they use a workqueue to do their + their non-async counterparts. The big difference is that they + use a workqueue to do the resume or suspend part of their jobs. As a result they can be called in an atomic context, such as an URB's completion handler, but when they return the - device will not generally not yet be in the desired state. + device will generally not yet be in the desired state. usb_autopm_get_interface_no_resume() and usb_autopm_put_interface_no_suspend() merely increment or - decrement the pm_usage_count value; they do not attempt to - carry out an autoresume or an autosuspend. Hence they can be - called in an atomic context. + decrement the usage counter; they do not attempt to carry out + an autoresume or an autosuspend. Hence they can be called in + an atomic context. -The conventional usage pattern is that a driver calls +The simplest usage pattern is that a driver calls usb_autopm_get_interface() in its open routine and -usb_autopm_put_interface() in its close or release routine. But -other patterns are possible. +usb_autopm_put_interface() in its close or release routine. But other +patterns are possible. The autosuspend attempts mentioned above will often fail for one reason or another. For example, the power/level attribute might be set to "on", or another interface in the same device might not be idle. This is perfectly normal. If the reason for failure was that -the device hasn't been idle for long enough, a delayed workqueue -routine is automatically set up to carry out the operation when the -autosuspend idle-delay has expired. +the device hasn't been idle for long enough, a timer is scheduled to +carry out the operation automatically when the autosuspend idle-delay +has expired. Autoresume attempts also can fail, although failure would mean that the device is no longer present or operating properly. Unlike -autosuspend, there's no delay for an autoresume. +autosuspend, there's no idle-delay for an autoresume. Other parts of the driver interface @@ -413,26 +412,27 @@ though, setting this flag won't cause the kernel to autoresume it. Normally a driver would set this flag in its probe method, at which time the device is guaranteed not to be autosuspended.) -The synchronous usb_autopm_* routines have to run in a sleepable -process context; they must not be called from an interrupt handler or -while holding a spinlock. In fact, the entire autosuspend mechanism -is not well geared toward interrupt-driven operation. However there -is one thing a driver can do in an interrupt handler: +If a driver does its I/O asynchronously in interrupt context, it +should call usb_autopm_get_interface_async() before starting output and +usb_autopm_put_interface_async() when the output queue drains. When +it receives an input event, it should call usb_mark_last_busy(struct usb_device *udev); -This sets udev->last_busy to the current time. udev->last_busy is the -field used for idle-delay calculations; updating it will cause any -pending autosuspend to be moved back. The usb_autopm_* routines will -also set the last_busy field to the current time. - -Calling urb_mark_last_busy() from within an URB completion handler is -subject to races: The kernel may have just finished deciding the -device has been idle for long enough but not yet gotten around to -calling the driver's suspend method. The driver would have to be -responsible for synchronizing its suspend method with its URB -completion handler and causing the autosuspend to fail with -EBUSY if -an URB had completed too recently. +in the event handler. This sets udev->last_busy to the current time. +udev->last_busy is the field used for idle-delay calculations; +updating it will cause any pending autosuspend to be moved back. Most +of the usb_autopm_* routines will also set the last_busy field to the +current time. + +Asynchronous operation is always subject to races. For example, a +driver may call one of the usb_autopm_*_interface_async() routines at +a time when the core has just finished deciding the device has been +idle for long enough but not yet gotten around to calling the driver's +suspend method. The suspend method must be responsible for +synchronizing with the output request routine and the URB completion +handler; it should cause autosuspends to fail with -EBUSY if the +driver needs to use the device. External suspend calls should never be allowed to fail in this way, only autosuspend calls. The driver can tell them apart by checking @@ -440,75 +440,23 @@ the PM_EVENT_AUTO bit in the message.event argument to the suspend method; this bit will be set for internal PM events (autosuspend) and clear for external PM events. -Many of the ingredients in the autosuspend framework are oriented -towards interfaces: The usb_interface structure contains the -pm_usage_cnt field, and the usb_autopm_* routines take an interface -pointer as their argument. But somewhat confusingly, a few of the -pieces (i.e., usb_mark_last_busy()) use the usb_device structure -instead. Drivers need to keep this straight; they can call -interface_to_usbdev() to find the device structure for a given -interface. + Mutual exclusion + ---------------- - Locking requirements - -------------------- - -All three suspend/resume methods are always called while holding the -usb_device's PM mutex. For external events -- but not necessarily for -autosuspend or autoresume -- the device semaphore (udev->dev.sem) will -also be held. This implies that external suspend/resume events are -mutually exclusive with calls to probe, disconnect, pre_reset, and -post_reset; the USB core guarantees that this is true of internal -suspend/resume events as well. +For external events -- but not necessarily for autosuspend or +autoresume -- the device semaphore (udev->dev.sem) will be held when a +suspend or resume method is called. This implies that external +suspend/resume events are mutually exclusive with calls to probe, +disconnect, pre_reset, and post_reset; the USB core guarantees that +this is true of autosuspend/autoresume events as well. If a driver wants to block all suspend/resume calls during some -critical section, it can simply acquire udev->pm_mutex. Note that -calls to resume may be triggered indirectly. Block IO due to memory -allocations can make the vm subsystem resume a device. Thus while -holding this lock you must not allocate memory with GFP_KERNEL or -GFP_NOFS. - -Alternatively, if the critical section might call some of the -usb_autopm_* routines, the driver can avoid deadlock by doing: - - down(&udev->dev.sem); - rc = usb_autopm_get_interface(intf); - -and at the end of the critical section: - - if (!rc) - usb_autopm_put_interface(intf); - up(&udev->dev.sem); - -Holding the device semaphore will block all external PM calls, and the -usb_autopm_get_interface() will prevent any internal PM calls, even if -it fails. (Exercise: Why?) - -The rules for locking order are: - - Never acquire any device semaphore while holding any PM mutex. - - Never acquire udev->pm_mutex while holding the PM mutex for - a device that isn't a descendant of udev. - -In other words, PM mutexes should only be acquired going up the device -tree, and they should be acquired only after locking all the device -semaphores you need to hold. These rules don't matter to drivers very -much; they usually affect just the USB core. - -Still, drivers do need to be careful. For example, many drivers use a -private mutex to synchronize their normal I/O activities with their -disconnect method. Now if the driver supports autosuspend then it -must call usb_autopm_put_interface() from somewhere -- maybe from its -close method. It should make the call while holding the private mutex, -since a driver shouldn't call any of the usb_autopm_* functions for an -interface from which it has been unbound. - -But the usb_autpm_* routines always acquire the device's PM mutex, and -consequently the locking order has to be: private mutex first, PM -mutex second. Since the suspend method is always called with the PM -mutex held, it mustn't try to acquire the private mutex. It has to -synchronize with the driver's I/O activities in some other way. +critical section, the best way is to lock the device and call +usb_autopm_get_interface() (and do the reverse at the end of the +critical section). Holding the device semaphore will block all +external PM calls, and the usb_autopm_get_interface() will prevent any +internal PM calls, even if it fails. (Exercise: Why?) Interaction between dynamic PM and system PM @@ -517,22 +465,11 @@ synchronize with the driver's I/O activities in some other way. Dynamic power management and system power management can interact in a couple of ways. -Firstly, a device may already be manually suspended or autosuspended -when a system suspend occurs. Since system suspends are supposed to -be as transparent as possible, the device should remain suspended -following the system resume. The 2.6.23 kernel obeys this principle -for manually suspended devices but not for autosuspended devices; they -do get resumed when the system wakes up. (Presumably they will be -autosuspended again after their idle-delay time expires.) In later -kernels this behavior will be fixed. - -(There is an exception. If a device would undergo a reset-resume -instead of a normal resume, and the device is enabled for remote -wakeup, then the reset-resume takes place even if the device was -already suspended when the system suspend began. The justification is -that a reset-resume is a kind of remote-wakeup event. Or to put it -another way, a device which needs a reset won't be able to generate -normal remote-wakeup signals, so it ought to be resumed immediately.) +Firstly, a device may already be autosuspended when a system suspend +occurs. Since system suspends are supposed to be as transparent as +possible, the device should remain suspended following the system +resume. But this theory may not work out well in practice; over time +the kernel's behavior in this regard has changed. Secondly, a dynamic power-management event may occur as a system suspend is underway. The window for this is short, since system diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index ad92594..97a819c 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -91,8 +91,8 @@ config USB_DYNAMIC_MINORS If you are unsure about this, say N here. config USB_SUSPEND - bool "USB selective suspend/resume and wakeup" - depends on USB && PM + bool "USB runtime power management (suspend/resume and wakeup)" + depends on USB && PM_RUNTIME help If you say Y here, you can use driver calls or the sysfs "power/level" file to suspend or resume individual USB diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 638d546..6850ec6 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -25,7 +25,7 @@ #include #include #include -#include +#include #include "hcd.h" #include "usb.h" @@ -221,7 +221,7 @@ static int usb_probe_device(struct device *dev) { struct usb_device_driver *udriver = to_usb_device_driver(dev->driver); struct usb_device *udev = to_usb_device(dev); - int error = -ENODEV; + int error = 0; dev_dbg(dev, "%s\n", __func__); @@ -230,18 +230,23 @@ static int usb_probe_device(struct device *dev) /* The device should always appear to be in use * unless the driver suports autosuspend. */ - udev->pm_usage_cnt = !(udriver->supports_autosuspend); + if (!udriver->supports_autosuspend) + error = usb_autoresume_device(udev); - error = udriver->probe(udev); + if (!error) + error = udriver->probe(udev); return error; } /* called from driver core with dev locked */ static int usb_unbind_device(struct device *dev) { + struct usb_device *udev = to_usb_device(dev); struct usb_device_driver *udriver = to_usb_device_driver(dev->driver); - udriver->disconnect(to_usb_device(dev)); + udriver->disconnect(udev); + if (!udriver->supports_autosuspend) + usb_autosuspend_device(udev); return 0; } @@ -293,17 +298,16 @@ static int usb_probe_interface(struct device *dev) if (error) return error; - /* Interface "power state" doesn't correspond to any hardware - * state whatsoever. We use it to record when it's bound to - * a driver that may start I/0: it's not frozen/quiesced. - */ - mark_active(intf); intf->condition = USB_INTERFACE_BINDING; - /* The interface should always appear to be in use - * unless the driver suports autosuspend. + /* Bound interfaces are initially active. They are + * runtime-PM-enabled only if the driver has autosuspend support. + * They are sensitive to their children's power states. */ - atomic_set(&intf->pm_usage_cnt, !driver->supports_autosuspend); + pm_runtime_set_active(dev); + pm_suspend_ignore_children(dev, false); + if (driver->supports_autosuspend) + pm_runtime_enable(dev); /* Carry out a deferred switch to altsetting 0 */ if (intf->needs_altsetting0) { @@ -323,10 +327,14 @@ static int usb_probe_interface(struct device *dev) return error; err: - mark_quiesced(intf); intf->needs_remote_wakeup = 0; intf->condition = USB_INTERFACE_UNBOUND; usb_cancel_queued_reset(intf); + + /* Unbound interfaces are always runtime-PM-disabled and -suspended */ + pm_runtime_disable(dev); + pm_runtime_set_suspended(dev); + usb_autosuspend_device(udev); return error; } @@ -376,9 +384,17 @@ static int usb_unbind_interface(struct device *dev) usb_set_intfdata(intf, NULL); intf->condition = USB_INTERFACE_UNBOUND; - mark_quiesced(intf); intf->needs_remote_wakeup = 0; + /* Unbound interfaces are always runtime-PM-disabled and -suspended */ + pm_runtime_disable(dev); + pm_runtime_set_suspended(dev); + + /* Undo any residual pm_autopm_get_interface_* calls */ + for (r = atomic_read(&intf->pm_usage_cnt); r > 0; --r) + usb_autopm_put_interface_no_suspend(intf); + atomic_set(&intf->pm_usage_cnt, 0); + if (!error) usb_autosuspend_device(udev); @@ -409,7 +425,6 @@ int usb_driver_claim_interface(struct usb_driver *driver, struct usb_interface *iface, void *priv) { struct device *dev = &iface->dev; - struct usb_device *udev = interface_to_usbdev(iface); int retval = 0; if (dev->driver) @@ -419,11 +434,16 @@ int usb_driver_claim_interface(struct usb_driver *driver, usb_set_intfdata(iface, priv); iface->needs_binding = 0; - usb_pm_lock(udev); iface->condition = USB_INTERFACE_BOUND; - mark_active(iface); - atomic_set(&iface->pm_usage_cnt, !driver->supports_autosuspend); - usb_pm_unlock(udev); + + /* Bound interfaces are initially active. They are + * runtime-PM-enabled only if the driver has autosuspend support. + * They are sensitive to their children's power states. + */ + pm_runtime_set_active(dev); + pm_suspend_ignore_children(dev, false); + if (driver->supports_autosuspend) + pm_runtime_enable(dev); /* if interface was already added, bind now; else let * the future device_add() bind it, bypassing probe() @@ -982,7 +1002,6 @@ static void do_unbind_rebind(struct usb_device *udev, int action) } } -/* Caller has locked udev's pm_mutex */ static int usb_suspend_device(struct usb_device *udev, pm_message_t msg) { struct usb_device_driver *udriver; @@ -1006,7 +1025,6 @@ static int usb_suspend_device(struct usb_device *udev, pm_message_t msg) return status; } -/* Caller has locked udev's pm_mutex */ static int usb_resume_device(struct usb_device *udev, pm_message_t msg) { struct usb_device_driver *udriver; @@ -1040,27 +1058,20 @@ static int usb_resume_device(struct usb_device *udev, pm_message_t msg) return status; } -/* Caller has locked intf's usb_device's pm mutex */ static int usb_suspend_interface(struct usb_device *udev, struct usb_interface *intf, pm_message_t msg) { struct usb_driver *driver; int status = 0; - /* with no hardware, USB interfaces only use FREEZE and ON states */ - if (udev->state == USB_STATE_NOTATTACHED || !is_active(intf)) - goto done; - - /* This can happen; see usb_driver_release_interface() */ - if (intf->condition == USB_INTERFACE_UNBOUND) + if (udev->state == USB_STATE_NOTATTACHED || + intf->condition == USB_INTERFACE_UNBOUND) goto done; driver = to_usb_driver(intf->dev.driver); if (driver->suspend) { status = driver->suspend(intf, msg); - if (status == 0) - mark_quiesced(intf); - else if (!(msg.event & PM_EVENT_AUTO)) + if (status && !(msg.event & PM_EVENT_AUTO)) dev_err(&intf->dev, "%s error %d\n", "suspend", status); } else { @@ -1068,7 +1079,6 @@ static int usb_suspend_interface(struct usb_device *udev, intf->needs_binding = 1; dev_warn(&intf->dev, "no %s for driver %s?\n", "suspend", driver->name); - mark_quiesced(intf); } done: @@ -1076,14 +1086,13 @@ static int usb_suspend_interface(struct usb_device *udev, return status; } -/* Caller has locked intf's usb_device's pm_mutex */ static int usb_resume_interface(struct usb_device *udev, struct usb_interface *intf, pm_message_t msg, int reset_resume) { struct usb_driver *driver; int status = 0; - if (udev->state == USB_STATE_NOTATTACHED || is_active(intf)) + if (udev->state == USB_STATE_NOTATTACHED) goto done; /* Don't let autoresume interfere with unbinding */ @@ -1134,90 +1143,11 @@ static int usb_resume_interface(struct usb_device *udev, done: dev_vdbg(&intf->dev, "%s: status %d\n", __func__, status); - if (status == 0 && intf->condition == USB_INTERFACE_BOUND) - mark_active(intf); /* Later we will unbind the driver and/or reprobe, if necessary */ return status; } -#ifdef CONFIG_USB_SUSPEND - -/* Internal routine to check whether we may autosuspend a device. */ -static int autosuspend_check(struct usb_device *udev, int reschedule) -{ - int i; - struct usb_interface *intf; - unsigned long suspend_time, j; - - /* For autosuspend, fail fast if anything is in use or autosuspend - * is disabled. Also fail if any interfaces require remote wakeup - * but it isn't available. - */ - if (udev->pm_usage_cnt > 0) - return -EBUSY; - if (udev->autosuspend_delay < 0 || udev->autosuspend_disabled) - return -EPERM; - - suspend_time = udev->last_busy + udev->autosuspend_delay; - if (udev->actconfig) { - for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { - intf = udev->actconfig->interface[i]; - if (!is_active(intf)) - continue; - if (atomic_read(&intf->pm_usage_cnt) > 0) - return -EBUSY; - if (intf->needs_remote_wakeup && - !udev->do_remote_wakeup) { - dev_dbg(&udev->dev, "remote wakeup needed " - "for autosuspend\n"); - return -EOPNOTSUPP; - } - - /* Don't allow autosuspend if the device will need - * a reset-resume and any of its interface drivers - * doesn't include support. - */ - if (udev->quirks & USB_QUIRK_RESET_RESUME) { - struct usb_driver *driver; - - driver = to_usb_driver(intf->dev.driver); - if (!driver->reset_resume || - intf->needs_remote_wakeup) - return -EOPNOTSUPP; - } - } - } - - /* If everything is okay but the device hasn't been idle for long - * enough, queue a delayed autosuspend request. If the device - * _has_ been idle for long enough and the reschedule flag is set, - * likewise queue a delayed (1 second) autosuspend request. - */ - j = jiffies; - if (time_before(j, suspend_time)) - reschedule = 1; - else - suspend_time = j + HZ; - if (reschedule) { - if (!timer_pending(&udev->autosuspend.timer)) { - queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend, - round_jiffies_up_relative(suspend_time - j)); - } - return -EAGAIN; - } - return 0; -} - -#else - -static inline int autosuspend_check(struct usb_device *udev, int reschedule) -{ - return 0; -} - -#endif /* CONFIG_USB_SUSPEND */ - /** * usb_suspend_both - suspend a USB device and its interfaces * @udev: the usb_device to suspend @@ -1229,27 +1159,12 @@ static inline int autosuspend_check(struct usb_device *udev, int reschedule) * all the interfaces which were suspended are resumed so that they remain * in the same state as the device. * - * If an autosuspend is in progress the routine checks first to make sure - * that neither the device itself or any of its active interfaces is in use - * (pm_usage_cnt is greater than 0). If they are, the autosuspend fails. - * - * If the suspend succeeds, the routine recursively queues an autosuspend - * request for @udev's parent device, thereby propagating the change up - * the device tree. If all of the parent's children are now suspended, - * the parent will autosuspend in turn. - * - * The suspend method calls are subject to mutual exclusion under control - * of @udev's pm_mutex. Many of these calls are also under the protection - * of @udev's device lock (including all requests originating outside the - * USB subsystem), but autosuspend requests generated by a child device or - * interface driver may not be. Usbcore will insure that the method calls - * do not arrive during bind, unbind, or reset operations. However, drivers - * must be prepared to handle suspend calls arriving at unpredictable times. - * The only way to block such calls is to do an autoresume (preventing - * autosuspends) while holding @udev's device lock (preventing outside - * suspends). - * - * The caller must hold @udev->pm_mutex. + * Autosuspend requests originating from a child device or an interface + * driver may be made without the protection of @udev's device lock, but + * all other suspend calls will hold the lock. Usbcore will insure that + * method calls do not arrive during bind, unbind, or reset operations. + * However drivers must be prepared to handle suspend calls arriving at + * unpredictable times. * * This routine can run only in process context. */ @@ -1258,20 +1173,11 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg) int status = 0; int i = 0; struct usb_interface *intf; - struct usb_device *parent = udev->parent; if (udev->state == USB_STATE_NOTATTACHED || udev->state == USB_STATE_SUSPENDED) goto done; - udev->do_remote_wakeup = device_may_wakeup(&udev->dev); - - if (msg.event & PM_EVENT_AUTO) { - status = autosuspend_check(udev, 0); - if (status < 0) - goto done; - } - /* Suspend all the interfaces and then udev itself */ if (udev->actconfig) { for (; i < udev->actconfig->desc.bNumInterfaces; i++) { @@ -1286,35 +1192,21 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg) /* If the suspend failed, resume interfaces that did get suspended */ if (status != 0) { - pm_message_t msg2; - - msg2.event = msg.event ^ (PM_EVENT_SUSPEND | PM_EVENT_RESUME); + msg.event ^= (PM_EVENT_SUSPEND | PM_EVENT_RESUME); while (--i >= 0) { intf = udev->actconfig->interface[i]; - usb_resume_interface(udev, intf, msg2, 0); + usb_resume_interface(udev, intf, msg, 0); } - /* Try another autosuspend when the interfaces aren't busy */ - if (msg.event & PM_EVENT_AUTO) - autosuspend_check(udev, status == -EBUSY); - - /* If the suspend succeeded then prevent any more URB submissions, - * flush any outstanding URBs, and propagate the suspend up the tree. + /* If the suspend succeeded then prevent any more URB submissions + * and flush any outstanding URBs. */ } else { - cancel_delayed_work(&udev->autosuspend); udev->can_submit = 0; for (i = 0; i < 16; ++i) { usb_hcd_flush_endpoint(udev, udev->ep_out[i]); usb_hcd_flush_endpoint(udev, udev->ep_in[i]); } - - /* If this is just a FREEZE or a PRETHAW, udev might - * not really be suspended. Only true suspends get - * propagated up the device tree. - */ - if (parent && udev->state == USB_STATE_SUSPENDED) - usb_autosuspend_device(parent); } done: @@ -1331,23 +1223,12 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg) * the resume method for @udev and then calls the resume methods for all * the interface drivers in @udev. * - * Before starting the resume, the routine calls itself recursively for - * the parent device of @udev, thereby propagating the change up the device - * tree and assuring that @udev will be able to resume. If the parent is - * unable to resume successfully, the routine fails. - * - * The resume method calls are subject to mutual exclusion under control - * of @udev's pm_mutex. Many of these calls are also under the protection - * of @udev's device lock (including all requests originating outside the - * USB subsystem), but autoresume requests generated by a child device or - * interface driver may not be. Usbcore will insure that the method calls - * do not arrive during bind, unbind, or reset operations. However, drivers - * must be prepared to handle resume calls arriving at unpredictable times. - * The only way to block such calls is to do an autoresume (preventing - * other autoresumes) while holding @udev's device lock (preventing outside - * resumes). - * - * The caller must hold @udev->pm_mutex. + * Autoresume requests originating from a child device or an interface + * driver may be made without the protection of @udev's device lock, but + * all other resume calls will hold the lock. Usbcore will insure that + * method calls do not arrive during bind, unbind, or reset operations. + * However drivers must be prepared to handle resume calls arriving at + * unpredictable times. * * This routine can run only in process context. */ @@ -1356,48 +1237,18 @@ static int usb_resume_both(struct usb_device *udev, pm_message_t msg) int status = 0; int i; struct usb_interface *intf; - struct usb_device *parent = udev->parent; - cancel_delayed_work(&udev->autosuspend); if (udev->state == USB_STATE_NOTATTACHED) { status = -ENODEV; goto done; } udev->can_submit = 1; - /* Propagate the resume up the tree, if necessary */ - if (udev->state == USB_STATE_SUSPENDED) { - if (parent) { - status = usb_autoresume_device(parent); - if (status == 0) { - status = usb_resume_device(udev, msg); - if (status || udev->state == - USB_STATE_NOTATTACHED) { - usb_autosuspend_device(parent); - - /* It's possible usb_resume_device() - * failed after the port was - * unsuspended, causing udev to be - * logically disconnected. We don't - * want usb_disconnect() to autosuspend - * the parent again, so tell it that - * udev disconnected while still - * suspended. */ - if (udev->state == - USB_STATE_NOTATTACHED) - udev->discon_suspended = 1; - } - } - } else { - - /* We can't progagate beyond the USB subsystem, - * so if a root hub's controller is suspended - * then we're stuck. */ - status = usb_resume_device(udev, msg); - } - } else if (udev->reset_resume) + /* Resume the device */ + if (udev->state == USB_STATE_SUSPENDED || udev->reset_resume) status = usb_resume_device(udev, msg); + /* Resume the interfaces */ if (status == 0 && udev->actconfig) { for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { intf = udev->actconfig->interface[i]; @@ -1413,104 +1264,46 @@ static int usb_resume_both(struct usb_device *udev, pm_message_t msg) return status; } -/** - * usb_external_suspend_device - external suspend of a USB device and its interfaces - * @udev: the usb_device to suspend - * @msg: Power Management message describing this state transition - * - * This routine handles external suspend requests: ones not generated - * internally by a USB driver (autosuspend) but rather coming from the user - * (via sysfs) or the PM core (system sleep). The suspend will be carried - * out regardless of @udev's usage counter or those of its interfaces, - * and regardless of whether or not remote wakeup is enabled. Of course, - * interface drivers still have the option of failing the suspend (if - * there are unsuspended children, for example). - * - * The caller must hold @udev's device lock. - */ -int usb_external_suspend_device(struct usb_device *udev, pm_message_t msg) -{ - int status; - - do_unbind_rebind(udev, DO_UNBIND); - usb_pm_lock(udev); - status = usb_suspend_both(udev, msg); - usb_pm_unlock(udev); - return status; -} - -/** - * usb_external_resume_device - external resume of a USB device and its interfaces - * @udev: the usb_device to resume - * @msg: Power Management message describing this state transition - * - * This routine handles external resume requests: ones not generated - * internally by a USB driver (autoresume) but rather coming from the user - * (via sysfs), the PM core (system resume), or the device itself (remote - * wakeup). @udev's usage counter is unaffected. - * - * The caller must hold @udev's device lock. - */ -int usb_external_resume_device(struct usb_device *udev, pm_message_t msg) -{ - int status; - - usb_pm_lock(udev); - status = usb_resume_both(udev, msg); - udev->last_busy = jiffies; - usb_pm_unlock(udev); - if (status == 0) - do_unbind_rebind(udev, DO_REBIND); - - /* Now that the device is awake, we can start trying to autosuspend - * it again. */ - if (status == 0) - usb_try_autosuspend_device(udev); - return status; -} - +/* The device lock is held by the PM core */ int usb_suspend(struct device *dev, pm_message_t msg) { - struct usb_device *udev; - - udev = to_usb_device(dev); + struct usb_device *udev = to_usb_device(dev); - /* If udev is already suspended, we can skip this suspend and - * we should also skip the upcoming system resume. High-speed - * root hubs are an exception; they need to resume whenever the - * system wakes up in order for USB-PERSIST port handover to work - * properly. - */ - if (udev->state == USB_STATE_SUSPENDED) { - if (udev->parent || udev->speed != USB_SPEED_HIGH) - udev->skip_sys_resume = 1; - return 0; - } - - udev->skip_sys_resume = 0; - return usb_external_suspend_device(udev, msg); + do_unbind_rebind(udev, DO_UNBIND); + udev->do_remote_wakeup = device_may_wakeup(&udev->dev); + return usb_suspend_both(udev, msg); } +/* The device lock is held by the PM core */ int usb_resume(struct device *dev, pm_message_t msg) { - struct usb_device *udev; + struct usb_device *udev = to_usb_device(dev); int status; - udev = to_usb_device(dev); + /* For PM complete calls, all we do is rebind interfaces */ + if (msg.event == PM_EVENT_ON) { + if (udev->state != USB_STATE_NOTATTACHED) + do_unbind_rebind(udev, DO_REBIND); + status = 0; - /* If udev->skip_sys_resume is set then udev was already suspended - * when the system sleep started, so we don't want to resume it - * during this system wakeup. + /* For all other calls, take the device back to full power and + * tell the PM core in case it was autosuspended previously. */ - if (udev->skip_sys_resume) - return 0; - status = usb_external_resume_device(udev, msg); + } else { + status = usb_resume_both(udev, msg); + if (status == 0) { + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + udev->last_busy = jiffies; + } + } /* Avoid PM error messages for devices disconnected while suspended * as we'll display regular disconnect messages just a bit later. */ if (status == -ENODEV) - return 0; + status = 0; return status; } @@ -1560,54 +1353,6 @@ int usb_disable_autosuspend(struct usb_device *udev) } EXPORT_SYMBOL_GPL(usb_disable_autosuspend); -/* Internal routine to adjust a device's usage counter and change - * its autosuspend state. - */ -static int usb_autopm_do_device(struct usb_device *udev, int inc_usage_cnt) -{ - int status = 0; - - usb_pm_lock(udev); - udev->pm_usage_cnt += inc_usage_cnt; - WARN_ON(udev->pm_usage_cnt < 0); - if (inc_usage_cnt) - udev->last_busy = jiffies; - if (inc_usage_cnt >= 0 && udev->pm_usage_cnt > 0) { - if (udev->state == USB_STATE_SUSPENDED) - status = usb_resume_both(udev, PMSG_AUTO_RESUME); - if (status != 0) - udev->pm_usage_cnt -= inc_usage_cnt; - else if (inc_usage_cnt) - udev->last_busy = jiffies; - } else if (inc_usage_cnt <= 0 && udev->pm_usage_cnt <= 0) { - status = usb_suspend_both(udev, PMSG_AUTO_SUSPEND); - } - usb_pm_unlock(udev); - return status; -} - -/* usb_autosuspend_work - callback routine to autosuspend a USB device */ -void usb_autosuspend_work(struct work_struct *work) -{ - struct usb_device *udev = - container_of(work, struct usb_device, autosuspend.work); - - usb_autopm_do_device(udev, 0); -} - -/* usb_autoresume_work - callback routine to autoresume a USB device */ -void usb_autoresume_work(struct work_struct *work) -{ - struct usb_device *udev = - container_of(work, struct usb_device, autoresume); - - /* Wake it up, let the drivers do their thing, and then put it - * back to sleep. - */ - if (usb_autopm_do_device(udev, 1) == 0) - usb_autopm_do_device(udev, -1); -} - /** * usb_autosuspend_device - delayed autosuspend of a USB device and its interfaces * @udev: the usb_device to autosuspend @@ -1616,12 +1361,9 @@ void usb_autoresume_work(struct work_struct *work) * @udev and wants to allow it to autosuspend. Examples would be when * @udev's device file in usbfs is closed or after a configuration change. * - * @udev's usage counter is decremented. If it or any of the usage counters - * for an active interface is greater than 0, no autosuspend request will be - * queued. (If an interface driver does not support autosuspend then its - * usage counter is permanently positive.) Furthermore, if an interface - * driver requires remote-wakeup capability during autosuspend but remote - * wakeup is disabled, the autosuspend will fail. + * @udev's usage counter is decremented; if it drops to 0 and all the + * interfaces are inactive then a delayed autosuspend will be attempted. + * The attempt may fail (see autosuspend_check()). * * The caller must hold @udev's device lock. * @@ -1631,9 +1373,11 @@ void usb_autosuspend_device(struct usb_device *udev) { int status; - status = usb_autopm_do_device(udev, -1); - dev_vdbg(&udev->dev, "%s: cnt %d\n", - __func__, udev->pm_usage_cnt); + udev->last_busy = jiffies; + status = pm_runtime_put_sync(&udev->dev); + dev_vdbg(&udev->dev, "%s: cnt %d -> %d\n", + __func__, atomic_read(&udev->dev.power.usage_count), + status); } /** @@ -1643,9 +1387,9 @@ void usb_autosuspend_device(struct usb_device *udev) * This routine should be called when a core subsystem thinks @udev may * be ready to autosuspend. * - * @udev's usage counter left unchanged. If it or any of the usage counters - * for an active interface is greater than 0, or autosuspend is not allowed - * for any other reason, no autosuspend request will be queued. + * @udev's usage counter left unchanged. If it is 0 and all the interfaces + * are inactive then an autosuspend will be attempted. The attempt may + * fail or be delayed. * * The caller must hold @udev's device lock. * @@ -1653,9 +1397,12 @@ void usb_autosuspend_device(struct usb_device *udev) */ void usb_try_autosuspend_device(struct usb_device *udev) { - usb_autopm_do_device(udev, 0); - dev_vdbg(&udev->dev, "%s: cnt %d\n", - __func__, udev->pm_usage_cnt); + int status; + + status = pm_runtime_idle(&udev->dev); + dev_vdbg(&udev->dev, "%s: cnt %d -> %d\n", + __func__, atomic_read(&udev->dev.power.usage_count), + status); } /** @@ -1664,9 +1411,9 @@ void usb_try_autosuspend_device(struct usb_device *udev) * * This routine should be called when a core subsystem wants to use @udev * and needs to guarantee that it is not suspended. No autosuspend will - * occur until usb_autosuspend_device is called. (Note that this will not - * prevent suspend events originating in the PM core.) Examples would be - * when @udev's device file in usbfs is opened or when a remote-wakeup + * occur until usb_autosuspend_device() is called. (Note that this will + * not prevent suspend events originating in the PM core.) Examples would + * be when @udev's device file in usbfs is opened or when a remote-wakeup * request is received. * * @udev's usage counter is incremented to prevent subsequent autosuspends. @@ -1680,42 +1427,14 @@ int usb_autoresume_device(struct usb_device *udev) { int status; - status = usb_autopm_do_device(udev, 1); - dev_vdbg(&udev->dev, "%s: status %d cnt %d\n", - __func__, status, udev->pm_usage_cnt); - return status; -} - -/* Internal routine to adjust an interface's usage counter and change - * its device's autosuspend state. - */ -static int usb_autopm_do_interface(struct usb_interface *intf, - int inc_usage_cnt) -{ - struct usb_device *udev = interface_to_usbdev(intf); - int status = 0; - - usb_pm_lock(udev); - if (intf->condition == USB_INTERFACE_UNBOUND) - status = -ENODEV; - else { - atomic_add(inc_usage_cnt, &intf->pm_usage_cnt); - udev->last_busy = jiffies; - if (inc_usage_cnt >= 0 && - atomic_read(&intf->pm_usage_cnt) > 0) { - if (udev->state == USB_STATE_SUSPENDED) - status = usb_resume_both(udev, - PMSG_AUTO_RESUME); - if (status != 0) - atomic_sub(inc_usage_cnt, &intf->pm_usage_cnt); - else - udev->last_busy = jiffies; - } else if (inc_usage_cnt <= 0 && - atomic_read(&intf->pm_usage_cnt) <= 0) { - status = usb_suspend_both(udev, PMSG_AUTO_SUSPEND); - } - } - usb_pm_unlock(udev); + status = pm_runtime_get_sync(&udev->dev); + if (status < 0) + pm_runtime_put_sync(&udev->dev); + dev_vdbg(&udev->dev, "%s: cnt %d -> %d\n", + __func__, atomic_read(&udev->dev.power.usage_count), + status); + if (status > 0) + status = 0; return status; } @@ -1729,34 +1448,25 @@ static int usb_autopm_do_interface(struct usb_interface *intf, * closed. * * The routine decrements @intf's usage counter. When the counter reaches - * 0, a delayed autosuspend request for @intf's device is queued. When - * the delay expires, if @intf->pm_usage_cnt is still <= 0 along with all - * the other usage counters for the sibling interfaces and @intf's - * usb_device, the device and all its interfaces will be autosuspended. - * - * Note that @intf->pm_usage_cnt is owned by the interface driver. The - * core will not change its value other than the increment and decrement - * in usb_autopm_get_interface and usb_autopm_put_interface. The driver - * may use this simple counter-oriented discipline or may set the value - * any way it likes. + * 0, a delayed autosuspend request for @intf's device is attempted. The + * attempt may fail (see autosuspend_check()). * * If the driver has set @intf->needs_remote_wakeup then autosuspend will * take place only if the device's remote-wakeup facility is enabled. * - * Suspend method calls queued by this routine can arrive at any time - * while @intf is resumed and its usage counter is equal to 0. They are - * not protected by the usb_device's lock but only by its pm_mutex. - * Drivers must provide their own synchronization. - * * This routine can run only in process context. */ void usb_autopm_put_interface(struct usb_interface *intf) { - int status; + struct usb_device *udev = interface_to_usbdev(intf); + int status; - status = usb_autopm_do_interface(intf, -1); - dev_vdbg(&intf->dev, "%s: status %d cnt %d\n", - __func__, status, atomic_read(&intf->pm_usage_cnt)); + udev->last_busy = jiffies; + atomic_dec(&intf->pm_usage_cnt); + status = pm_runtime_put_sync(&intf->dev); + dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n", + __func__, atomic_read(&intf->dev.power.usage_count), + status); } EXPORT_SYMBOL_GPL(usb_autopm_put_interface); @@ -1764,11 +1474,11 @@ EXPORT_SYMBOL_GPL(usb_autopm_put_interface); * usb_autopm_put_interface_async - decrement a USB interface's PM-usage counter * @intf: the usb_interface whose counter should be decremented * - * This routine does essentially the same thing as - * usb_autopm_put_interface(): it decrements @intf's usage counter and - * queues a delayed autosuspend request if the counter is <= 0. The - * difference is that it does not acquire the device's pm_mutex; - * callers must handle all synchronization issues themselves. + * This routine does much the same thing as usb_autopm_put_interface(): + * It decrements @intf's usage counter and schedules a delayed + * autosuspend request if the counter is <= 0. The difference is that it + * does not perform any synchronization; callers should hold a private + * lock and handle all synchronization issues themselves. * * Typically a driver would call this routine during an URB's completion * handler, if no more URBs were pending. @@ -1778,28 +1488,58 @@ EXPORT_SYMBOL_GPL(usb_autopm_put_interface); void usb_autopm_put_interface_async(struct usb_interface *intf) { struct usb_device *udev = interface_to_usbdev(intf); + unsigned long last_busy; int status = 0; - if (intf->condition == USB_INTERFACE_UNBOUND) { - status = -ENODEV; - } else { - udev->last_busy = jiffies; - atomic_dec(&intf->pm_usage_cnt); - if (udev->autosuspend_disabled || udev->autosuspend_delay < 0) - status = -EPERM; - else if (atomic_read(&intf->pm_usage_cnt) <= 0 && - !timer_pending(&udev->autosuspend.timer)) { - queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend, + last_busy = udev->last_busy; + udev->last_busy = jiffies; + atomic_dec(&intf->pm_usage_cnt); + pm_runtime_put_noidle(&intf->dev); + + if (!udev->autosuspend_disabled) { + /* Optimization: Don't schedule a delayed autosuspend if + * the timer is already running and the expiration time + * wouldn't change. + * + * We have to use the interface's timer. Attempts to + * schedule a suspend for the device would fail because + * the interface is still active. + */ + if (intf->dev.power.timer_expires == 0 || + round_jiffies_up(last_busy) != + round_jiffies_up(jiffies)) { + status = pm_schedule_suspend(&intf->dev, + jiffies_to_msecs( round_jiffies_up_relative( - udev->autosuspend_delay)); + udev->autosuspend_delay))); } } - dev_vdbg(&intf->dev, "%s: status %d cnt %d\n", - __func__, status, atomic_read(&intf->pm_usage_cnt)); + dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n", + __func__, atomic_read(&intf->dev.power.usage_count), + status); } EXPORT_SYMBOL_GPL(usb_autopm_put_interface_async); /** + * usb_autopm_put_interface_no_suspend - decrement a USB interface's PM-usage counter + * @intf: the usb_interface whose counter should be decremented + * + * This routine decrements @intf's usage counter but does not carry out an + * autosuspend. + * + * This routine can run in atomic context. + */ +void usb_autopm_put_interface_no_suspend(struct usb_interface *intf) +{ + struct usb_device *udev = interface_to_usbdev(intf); + + udev->last_busy = jiffies; + atomic_dec(&intf->pm_usage_cnt); + pm_runtime_put_noidle(&intf->dev); +} +EXPORT_SYMBOL_GPL(usb_autopm_put_interface_no_suspend); + +/** * usb_autopm_get_interface - increment a USB interface's PM-usage counter * @intf: the usb_interface whose counter should be incremented * @@ -1811,25 +1551,8 @@ EXPORT_SYMBOL_GPL(usb_autopm_put_interface_async); * or @intf is unbound. A typical example would be a character-device * driver when its device file is opened. * - * - * The routine increments @intf's usage counter. (However if the - * autoresume fails then the counter is re-decremented.) So long as the - * counter is greater than 0, autosuspend will not be allowed for @intf - * or its usb_device. When the driver is finished using @intf it should - * call usb_autopm_put_interface() to decrement the usage counter and - * queue a delayed autosuspend request (if the counter is <= 0). - * - * - * Note that @intf->pm_usage_cnt is owned by the interface driver. The - * core will not change its value other than the increment and decrement - * in usb_autopm_get_interface and usb_autopm_put_interface. The driver - * may use this simple counter-oriented discipline or may set the value - * any way it likes. - * - * Resume method calls generated by this routine can arrive at any time - * while @intf is suspended. They are not protected by the usb_device's - * lock but only by its pm_mutex. Drivers must provide their own - * synchronization. + * @intf's usage counter is incremented to prevent subsequent autosuspends. + * However if the autoresume fails then the counter is re-decremented. * * This routine can run only in process context. */ @@ -1837,9 +1560,16 @@ int usb_autopm_get_interface(struct usb_interface *intf) { int status; - status = usb_autopm_do_interface(intf, 1); - dev_vdbg(&intf->dev, "%s: status %d cnt %d\n", - __func__, status, atomic_read(&intf->pm_usage_cnt)); + status = pm_runtime_get_sync(&intf->dev); + if (status < 0) + pm_runtime_put_sync(&intf->dev); + else + atomic_inc(&intf->pm_usage_cnt); + dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n", + __func__, atomic_read(&intf->dev.power.usage_count), + status); + if (status > 0) + status = 0; return status; } EXPORT_SYMBOL_GPL(usb_autopm_get_interface); @@ -1849,41 +1579,201 @@ EXPORT_SYMBOL_GPL(usb_autopm_get_interface); * @intf: the usb_interface whose counter should be incremented * * This routine does much the same thing as - * usb_autopm_get_interface(): it increments @intf's usage counter and - * queues an autoresume request if the result is > 0. The differences - * are that it does not acquire the device's pm_mutex (callers must - * handle all synchronization issues themselves), and it does not - * autoresume the device directly (it only queues a request). After a - * successful call, the device will generally not yet be resumed. + * usb_autopm_get_interface(): It increments @intf's usage counter and + * queues an autoresume request if the device is suspended. The + * differences are that it does not perform any synchronization (callers + * should hold a private lock and handle all synchronization issues + * themselves), and it does not autoresume the device directly (it only + * queues a request). After a successful call, the device may not yet be + * resumed. * * This routine can run in atomic context. */ int usb_autopm_get_interface_async(struct usb_interface *intf) { - struct usb_device *udev = interface_to_usbdev(intf); - int status = 0; + int status = 0; + enum rpm_status s; - if (intf->condition == USB_INTERFACE_UNBOUND) - status = -ENODEV; - else { + /* Don't request a resume unless the interface is already suspending + * or suspended. Doing so would force a running suspend timer to be + * cancelled. + */ + pm_runtime_get_noresume(&intf->dev); + s = ACCESS_ONCE(intf->dev.power.runtime_status); + if (s == RPM_SUSPENDING || s == RPM_SUSPENDED) + status = pm_request_resume(&intf->dev); + + if (status < 0 && status != -EINPROGRESS) + pm_runtime_put_noidle(&intf->dev); + else atomic_inc(&intf->pm_usage_cnt); - if (atomic_read(&intf->pm_usage_cnt) > 0 && - udev->state == USB_STATE_SUSPENDED) - queue_work(ksuspend_usb_wq, &udev->autoresume); - } - dev_vdbg(&intf->dev, "%s: status %d cnt %d\n", - __func__, status, atomic_read(&intf->pm_usage_cnt)); + dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n", + __func__, atomic_read(&intf->dev.power.usage_count), + status); + if (status > 0) + status = 0; return status; } EXPORT_SYMBOL_GPL(usb_autopm_get_interface_async); -#else +/** + * usb_autopm_get_interface_no_resume - increment a USB interface's PM-usage counter + * @intf: the usb_interface whose counter should be incremented + * + * This routine increments @intf's usage counter but does not carry out an + * autoresume. + * + * This routine can run in atomic context. + */ +void usb_autopm_get_interface_no_resume(struct usb_interface *intf) +{ + struct usb_device *udev = interface_to_usbdev(intf); + + udev->last_busy = jiffies; + atomic_inc(&intf->pm_usage_cnt); + pm_runtime_get_noresume(&intf->dev); +} +EXPORT_SYMBOL_GPL(usb_autopm_get_interface_no_resume); + +/* Internal routine to check whether we may autosuspend a device. */ +static int autosuspend_check(struct usb_device *udev) +{ + int i; + struct usb_interface *intf; + unsigned long suspend_time, j; + + /* Fail if autosuspend is disabled, or any interfaces are in use, or + * any interface drivers require remote wakeup but it isn't available. + */ + udev->do_remote_wakeup = device_may_wakeup(&udev->dev); + if (udev->actconfig) { + for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { + intf = udev->actconfig->interface[i]; + + /* We don't need to check interfaces that are + * disabled for runtime PM. Either they are unbound + * or else their drivers don't support autosuspend + * and so they are permanently active. + */ + if (intf->dev.power.disable_depth) + continue; + if (atomic_read(&intf->dev.power.usage_count) > 0) + return -EBUSY; + if (intf->needs_remote_wakeup && + !udev->do_remote_wakeup) { + dev_dbg(&udev->dev, "remote wakeup needed " + "for autosuspend\n"); + return -EOPNOTSUPP; + } + + /* Don't allow autosuspend if the device will need + * a reset-resume and any of its interface drivers + * doesn't include support or needs remote wakeup. + */ + if (udev->quirks & USB_QUIRK_RESET_RESUME) { + struct usb_driver *driver; + + driver = to_usb_driver(intf->dev.driver); + if (!driver->reset_resume || + intf->needs_remote_wakeup) + return -EOPNOTSUPP; + } + } + } + + /* If everything is okay but the device hasn't been idle for long + * enough, queue a delayed autosuspend request. + */ + j = ACCESS_ONCE(jiffies); + suspend_time = udev->last_busy + udev->autosuspend_delay; + if (time_before(j, suspend_time)) { + pm_schedule_suspend(&udev->dev, jiffies_to_msecs( + round_jiffies_up_relative(suspend_time - j))); + return -EAGAIN; + } + return 0; +} + +static int usb_runtime_suspend(struct device *dev) +{ + int status = 0; -void usb_autosuspend_work(struct work_struct *work) -{} + /* A USB device can be suspended if it passes the various autosuspend + * checks. Runtime suspend for a USB device means suspending all the + * interfaces and then the device itself. + */ + if (is_usb_device(dev)) { + struct usb_device *udev = to_usb_device(dev); + + if (autosuspend_check(udev) != 0) + return -EAGAIN; + + status = usb_suspend_both(udev, PMSG_AUTO_SUSPEND); + + /* If an interface fails the suspend, adjust the last_busy + * time so that we don't get another suspend attempt right + * away. + */ + if (status) { + udev->last_busy = jiffies + + (udev->autosuspend_delay == 0 ? + HZ/2 : 0); + } + + /* Prevent the parent from suspending immediately after */ + else if (udev->parent) { + udev->parent->last_busy = jiffies; + } + } + + /* Runtime suspend for a USB interface doesn't mean anything. */ + return status; +} + +static int usb_runtime_resume(struct device *dev) +{ + /* Runtime resume for a USB device means resuming both the device + * and all its interfaces. + */ + if (is_usb_device(dev)) { + struct usb_device *udev = to_usb_device(dev); + int status; + + status = usb_resume_both(udev, PMSG_AUTO_RESUME); + udev->last_busy = jiffies; + return status; + } + + /* Runtime resume for a USB interface doesn't mean anything. */ + return 0; +} + +static int usb_runtime_idle(struct device *dev) +{ + /* An idle USB device can be suspended if it passes the various + * autosuspend checks. An idle interface can be suspended at + * any time. + */ + if (is_usb_device(dev)) { + struct usb_device *udev = to_usb_device(dev); + + if (autosuspend_check(udev) != 0) + return 0; + } + + pm_runtime_suspend(dev); + return 0; +} + +static struct dev_pm_ops usb_bus_pm_ops = { + .runtime_suspend = usb_runtime_suspend, + .runtime_resume = usb_runtime_resume, + .runtime_idle = usb_runtime_idle, +}; + +#else -void usb_autoresume_work(struct work_struct *work) -{} +#define usb_bus_pm_ops (*(struct dev_pm_ops *) NULL) #endif /* CONFIG_USB_SUSPEND */ @@ -1891,4 +1781,5 @@ struct bus_type usb_bus_type = { .name = "usb", .match = usb_device_match, .uevent = usb_uevent, + .pm = &usb_bus_pm_ops, }; diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index fc4290b..b07ba05 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -39,6 +39,7 @@ #include #include #include +#include #include @@ -1858,6 +1859,10 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg) return status; } +#endif /* CONFIG_PM */ + +#ifdef CONFIG_USB_SUSPEND + /* Workqueue routine for root-hub remote wakeup */ static void hcd_resume_work(struct work_struct *work) { @@ -1884,12 +1889,12 @@ void usb_hcd_resume_root_hub (struct usb_hcd *hcd) spin_lock_irqsave (&hcd_root_hub_lock, flags); if (hcd->rh_registered) - queue_work(ksuspend_usb_wq, &hcd->wakeup_work); + queue_work(pm_wq, &hcd->wakeup_work); spin_unlock_irqrestore (&hcd_root_hub_lock, flags); } EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub); -#endif +#endif /* CONFIG_USB_SUSPEND */ /*-------------------------------------------------------------------------*/ @@ -2034,7 +2039,7 @@ struct usb_hcd *usb_create_hcd (const struct hc_driver *driver, init_timer(&hcd->rh_timer); hcd->rh_timer.function = rh_timer_func; hcd->rh_timer.data = (unsigned long) hcd; -#ifdef CONFIG_PM +#ifdef CONFIG_USB_SUSPEND INIT_WORK(&hcd->wakeup_work, hcd_resume_work); #endif mutex_init(&hcd->bandwidth_mutex); @@ -2234,7 +2239,7 @@ void usb_remove_hcd(struct usb_hcd *hcd) hcd->rh_registered = 0; spin_unlock_irq (&hcd_root_hub_lock); -#ifdef CONFIG_PM +#ifdef CONFIG_USB_SUSPEND cancel_work_sync(&hcd->wakeup_work); #endif diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index 70a7e49..8953ded 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -80,7 +80,7 @@ struct usb_hcd { struct timer_list rh_timer; /* drives root-hub polling */ struct urb *status_urb; /* the current status urb */ -#ifdef CONFIG_PM +#ifdef CONFIG_USB_SUSPEND struct work_struct wakeup_work; /* for remote wakeup */ #endif @@ -464,16 +464,20 @@ extern int usb_find_interface_driver(struct usb_device *dev, #define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN)) #ifdef CONFIG_PM -extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd); extern void usb_root_hub_lost_power(struct usb_device *rhdev); extern int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg); extern int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg); +#endif /* CONFIG_PM */ + +#ifdef CONFIG_USB_SUSPEND +extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd); #else static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd) { return; } -#endif /* CONFIG_PM */ +#endif /* CONFIG_USB_SUSPEND */ + /* * USB device fs stuff diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 746f26f..0e0a190 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -71,7 +72,6 @@ struct usb_hub { unsigned mA_per_port; /* current for each child */ - unsigned init_done:1; unsigned limited_power:1; unsigned quiescing:1; unsigned disconnected:1; @@ -820,7 +820,6 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) } init3: hub->quiescing = 0; - hub->init_done = 1; status = usb_submit_urb(hub->urb, GFP_NOIO); if (status < 0) @@ -861,11 +860,6 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type) int i; cancel_delayed_work_sync(&hub->init_work); - if (!hub->init_done) { - hub->init_done = 1; - usb_autopm_put_interface_no_suspend( - to_usb_interface(hub->intfdev)); - } /* khubd and related activity won't re-trigger */ hub->quiescing = 1; @@ -1405,10 +1399,8 @@ static void recursively_mark_NOTATTACHED(struct usb_device *udev) if (udev->children[i]) recursively_mark_NOTATTACHED(udev->children[i]); } - if (udev->state == USB_STATE_SUSPENDED) { - udev->discon_suspended = 1; + if (udev->state == USB_STATE_SUSPENDED) udev->active_duration -= jiffies; - } udev->state = USB_STATE_NOTATTACHED; } @@ -1532,31 +1524,6 @@ static void update_address(struct usb_device *udev, int devnum) udev->devnum = devnum; } -#ifdef CONFIG_USB_SUSPEND - -static void usb_stop_pm(struct usb_device *udev) -{ - /* Synchronize with the ksuspend thread to prevent any more - * autosuspend requests from being submitted, and decrement - * the parent's count of unsuspended children. - */ - usb_pm_lock(udev); - if (udev->parent && !udev->discon_suspended) - usb_autosuspend_device(udev->parent); - usb_pm_unlock(udev); - - /* Stop any autosuspend or autoresume requests already submitted */ - cancel_delayed_work_sync(&udev->autosuspend); - cancel_work_sync(&udev->autoresume); -} - -#else - -static inline void usb_stop_pm(struct usb_device *udev) -{ } - -#endif - /** * usb_disconnect - disconnect a device (usbcore-internal) * @pdev: pointer to device being disconnected @@ -1625,8 +1592,6 @@ void usb_disconnect(struct usb_device **pdev) *pdev = NULL; spin_unlock_irq(&device_state_lock); - usb_stop_pm(udev); - put_device(&udev->dev); } @@ -1803,9 +1768,6 @@ int usb_new_device(struct usb_device *udev) int err; if (udev->parent) { - /* Increment the parent's count of unsuspended children */ - usb_autoresume_device(udev->parent); - /* Initialize non-root-hub device wakeup to disabled; * device (un)configuration controls wakeup capable * sysfs power/wakeup controls wakeup enabled/disabled @@ -1814,6 +1776,10 @@ int usb_new_device(struct usb_device *udev) device_set_wakeup_enable(&udev->dev, 1); } + /* Tell the runtime-PM framework the device is active */ + pm_runtime_set_active(&udev->dev); + pm_runtime_enable(&udev->dev); + usb_detect_quirks(udev); err = usb_enumerate_device(udev); /* Read descriptors */ if (err < 0) @@ -1844,7 +1810,8 @@ int usb_new_device(struct usb_device *udev) fail: usb_set_device_state(udev, USB_STATE_NOTATTACHED); - usb_stop_pm(udev); + pm_runtime_disable(&udev->dev); + pm_runtime_set_suspended(&udev->dev); return err; } @@ -2408,8 +2375,11 @@ int usb_remote_wakeup(struct usb_device *udev) if (udev->state == USB_STATE_SUSPENDED) { dev_dbg(&udev->dev, "usb %sresume\n", "wakeup-"); - usb_mark_last_busy(udev); - status = usb_external_resume_device(udev, PMSG_REMOTE_RESUME); + status = usb_autoresume_device(udev); + if (status == 0) { + /* Let the drivers do their thing, then... */ + usb_autosuspend_device(udev); + } } return status; } @@ -2446,11 +2416,6 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) return status; } -int usb_remote_wakeup(struct usb_device *udev) -{ - return 0; -} - #endif static int hub_suspend(struct usb_interface *intf, pm_message_t msg) @@ -3268,7 +3233,7 @@ static void hub_events(void) * disconnected while waiting for the lock to succeed. */ usb_lock_device(hdev); if (unlikely(hub->disconnected)) - goto loop2; + goto loop_disconnected; /* If the hub has died, clean up after it */ if (hdev->state == USB_STATE_NOTATTACHED) { @@ -3428,7 +3393,7 @@ static void hub_events(void) * kick_khubd() and allow autosuspend. */ usb_autopm_put_interface(intf); - loop2: + loop_disconnected: usb_unlock_device(hdev); kref_put(&hub->kref, hub_release); diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index df73574..73de41b 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1843,7 +1843,6 @@ free_interfaces: intf->dev.dma_mask = dev->dev.dma_mask; INIT_WORK(&intf->reset_ws, __usb_queue_reset_device); device_initialize(&intf->dev); - mark_quiesced(intf); dev_set_name(&intf->dev, "%d-%s:%d.%d", dev->bus->busnum, dev->devpath, configuration, alt->desc.bInterfaceNumber); diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 0daff0d..32966cc 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -49,9 +49,6 @@ const char *usbcore_name = "usbcore"; static int nousb; /* Disable USB when built into kernel image */ -/* Workqueue for autosuspend and for remote wakeup of root hubs */ -struct workqueue_struct *ksuspend_usb_wq; - #ifdef CONFIG_USB_SUSPEND static int usb_autosuspend_delay = 2; /* Default delay value, * in seconds */ @@ -264,23 +261,6 @@ static int usb_dev_uevent(struct device *dev, struct kobj_uevent_env *env) #ifdef CONFIG_PM -static int ksuspend_usb_init(void) -{ - /* This workqueue is supposed to be both freezable and - * singlethreaded. Its job doesn't justify running on more - * than one CPU. - */ - ksuspend_usb_wq = create_freezeable_workqueue("ksuspend_usbd"); - if (!ksuspend_usb_wq) - return -ENOMEM; - return 0; -} - -static void ksuspend_usb_cleanup(void) -{ - destroy_workqueue(ksuspend_usb_wq); -} - /* USB device Power-Management thunks. * There's no need to distinguish here between quiescing a USB device * and powering it down; the generic_suspend() routine takes care of @@ -296,7 +276,7 @@ static int usb_dev_prepare(struct device *dev) static void usb_dev_complete(struct device *dev) { /* Currently used only for rebinding interfaces */ - usb_resume(dev, PMSG_RESUME); /* Message event is meaningless */ + usb_resume(dev, PMSG_ON); /* FIXME: change to PMSG_COMPLETE */ } static int usb_dev_suspend(struct device *dev) @@ -342,9 +322,7 @@ static const struct dev_pm_ops usb_device_pm_ops = { #else -#define ksuspend_usb_init() 0 -#define ksuspend_usb_cleanup() do {} while (0) -#define usb_device_pm_ops (*(struct dev_pm_ops *)0) +#define usb_device_pm_ops (*(struct dev_pm_ops *) NULL) #endif /* CONFIG_PM */ @@ -472,9 +450,6 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent, INIT_LIST_HEAD(&dev->filelist); #ifdef CONFIG_PM - mutex_init(&dev->pm_mutex); - INIT_DELAYED_WORK(&dev->autosuspend, usb_autosuspend_work); - INIT_WORK(&dev->autoresume, usb_autoresume_work); dev->autosuspend_delay = usb_autosuspend_delay * HZ; dev->connect_time = jiffies; dev->active_duration = -jiffies; @@ -1117,9 +1092,6 @@ static int __init usb_init(void) if (retval) goto out; - retval = ksuspend_usb_init(); - if (retval) - goto out; retval = bus_register(&usb_bus_type); if (retval) goto bus_register_failed; @@ -1159,7 +1131,7 @@ major_init_failed: bus_notifier_failed: bus_unregister(&usb_bus_type); bus_register_failed: - ksuspend_usb_cleanup(); + usb_debugfs_cleanup(); out: return retval; } @@ -1181,7 +1153,6 @@ static void __exit usb_exit(void) usb_hub_cleanup(); bus_unregister_notifier(&usb_bus_type, &usb_bus_nb); bus_unregister(&usb_bus_type); - ksuspend_usb_cleanup(); usb_debugfs_cleanup(); } diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 2b74a7f..cd88220 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -55,25 +55,8 @@ extern void usb_major_cleanup(void); extern int usb_suspend(struct device *dev, pm_message_t msg); extern int usb_resume(struct device *dev, pm_message_t msg); -extern void usb_autosuspend_work(struct work_struct *work); -extern void usb_autoresume_work(struct work_struct *work); extern int usb_port_suspend(struct usb_device *dev, pm_message_t msg); extern int usb_port_resume(struct usb_device *dev, pm_message_t msg); -extern int usb_external_suspend_device(struct usb_device *udev, - pm_message_t msg); -extern int usb_external_resume_device(struct usb_device *udev, - pm_message_t msg); -extern int usb_remote_wakeup(struct usb_device *dev); - -static inline void usb_pm_lock(struct usb_device *udev) -{ - mutex_lock_nested(&udev->pm_mutex, udev->level); -} - -static inline void usb_pm_unlock(struct usb_device *udev) -{ - mutex_unlock(&udev->pm_mutex); -} #else @@ -87,14 +70,6 @@ static inline int usb_port_resume(struct usb_device *udev, pm_message_t msg) return 0; } -static inline int usb_remote_wakeup(struct usb_device *udev) -{ - return 0; -} - -static inline void usb_pm_lock(struct usb_device *udev) {} -static inline void usb_pm_unlock(struct usb_device *udev) {} - #endif #ifdef CONFIG_USB_SUSPEND @@ -102,6 +77,7 @@ static inline void usb_pm_unlock(struct usb_device *udev) {} extern void usb_autosuspend_device(struct usb_device *udev); extern void usb_try_autosuspend_device(struct usb_device *udev); extern int usb_autoresume_device(struct usb_device *udev); +extern int usb_remote_wakeup(struct usb_device *dev); #else @@ -112,9 +88,13 @@ static inline int usb_autoresume_device(struct usb_device *udev) return 0; } +static inline int usb_remote_wakeup(struct usb_device *udev) +{ + return 0; +} + #endif -extern struct workqueue_struct *ksuspend_usb_wq; extern struct bus_type usb_bus_type; extern struct device_type usb_device_type; extern struct device_type usb_if_device_type; @@ -144,23 +124,6 @@ static inline int is_usb_device_driver(struct device_driver *drv) for_devices; } -/* Interfaces and their "power state" are owned by usbcore */ - -static inline void mark_active(struct usb_interface *f) -{ - f->is_active = 1; -} - -static inline void mark_quiesced(struct usb_interface *f) -{ - f->is_active = 0; -} - -static inline int is_active(const struct usb_interface *f) -{ - return f->is_active; -} - /* for labeling diagnostics */ extern const char *usbcore_name; diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 3dab0c0..707a87d 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -1580,10 +1580,6 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf) return -ERESTARTSYS; /* FIXME: What if a system sleep starts while a test is running? */ - if (!intf->is_active) { - mutex_unlock(&dev->lock); - return -EHOSTUNREACH; - } /* some devices, like ez-usb default devices, need a non-default * altsetting to have any active endpoints. some tests change diff --git a/include/linux/usb.h b/include/linux/usb.h index e6419ac..ad50fc8 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -122,7 +122,6 @@ enum usb_interface_condition { * number from the USB core by calling usb_register_dev(). * @condition: binding state of the interface: not bound, binding * (in probe()), bound to a driver, or unbinding (in disconnect()) - * @is_active: flag set when the interface is bound and not suspended. * @sysfs_files_created: sysfs attributes exist * @ep_devs_created: endpoint child pseudo-devices exist * @unregistering: flag set when the interface is being unregistered @@ -135,8 +134,7 @@ enum usb_interface_condition { * @dev: driver model's view of this device * @usb_dev: if an interface is bound to the USB major, this will point * to the sysfs representation for that device. - * @pm_usage_cnt: PM usage counter for this interface; autosuspend is not - * allowed unless the counter is 0. + * @pm_usage_cnt: PM usage counter for this interface * @reset_ws: Used for scheduling resets from atomic context. * @reset_running: set to 1 if the interface is currently running a * queued reset so that usb_cancel_queued_reset() doesn't try to @@ -184,7 +182,6 @@ struct usb_interface { int minor; /* minor number this interface is * bound to */ enum usb_interface_condition condition; /* state of binding */ - unsigned is_active:1; /* the interface is not suspended */ unsigned sysfs_files_created:1; /* the sysfs attributes exist */ unsigned ep_devs_created:1; /* endpoint "devices" exist */ unsigned unregistering:1; /* unregistration is in progress */ @@ -401,7 +398,6 @@ struct usb_tt; * @portnum: parent port number (origin 1) * @level: number of USB hub ancestors * @can_submit: URBs may be submitted - * @discon_suspended: disconnected while suspended * @persist_enabled: USB_PERSIST enabled for this device * @have_langid: whether string_langid is valid * @authorized: policy has said we can use it; @@ -421,20 +417,15 @@ struct usb_tt; * @usbfs_dentry: usbfs dentry entry for the device * @maxchild: number of ports if hub * @children: child devices - USB devices that are attached to this hub - * @pm_usage_cnt: usage counter for autosuspend * @quirks: quirks of the whole device * @urbnum: number of URBs submitted for the whole device * @active_duration: total time device is not suspended - * @autosuspend: for delayed autosuspends - * @autoresume: for autoresumes requested while in_interrupt - * @pm_mutex: protects PM operations * @last_busy: time of last use * @autosuspend_delay: in jiffies * @connect_time: time device was first connected * @do_remote_wakeup: remote wakeup should be enabled * @reset_resume: needs reset instead of resume * @autosuspend_disabled: autosuspend disabled by the user - * @skip_sys_resume: skip the next system resume * @wusb_dev: if this is a Wireless USB device, link to the WUSB * specific data for the device. * @slot_id: Slot ID assigned by xHCI @@ -475,7 +466,6 @@ struct usb_device { u8 level; unsigned can_submit:1; - unsigned discon_suspended:1; unsigned persist_enabled:1; unsigned have_langid:1; unsigned authorized:1; @@ -499,17 +489,12 @@ struct usb_device { int maxchild; struct usb_device *children[USB_MAXCHILDREN]; - int pm_usage_cnt; u32 quirks; atomic_t urbnum; unsigned long active_duration; #ifdef CONFIG_PM - struct delayed_work autosuspend; - struct work_struct autoresume; - struct mutex pm_mutex; - unsigned long last_busy; int autosuspend_delay; unsigned long connect_time; @@ -517,7 +502,6 @@ struct usb_device { unsigned do_remote_wakeup:1; unsigned reset_resume:1; unsigned autosuspend_disabled:1; - unsigned skip_sys_resume:1; #endif struct wusb_dev *wusb_dev; int slot_id; @@ -549,17 +533,8 @@ extern int usb_autopm_get_interface(struct usb_interface *intf); extern void usb_autopm_put_interface(struct usb_interface *intf); extern int usb_autopm_get_interface_async(struct usb_interface *intf); extern void usb_autopm_put_interface_async(struct usb_interface *intf); - -static inline void usb_autopm_get_interface_no_resume( - struct usb_interface *intf) -{ - atomic_inc(&intf->pm_usage_cnt); -} -static inline void usb_autopm_put_interface_no_suspend( - struct usb_interface *intf) -{ - atomic_dec(&intf->pm_usage_cnt); -} +extern void usb_autopm_get_interface_no_resume(struct usb_interface *intf); +extern void usb_autopm_put_interface_no_suspend(struct usb_interface *intf); static inline void usb_mark_last_busy(struct usb_device *udev) { -- cgit v0.10.2 From d23356da714595b888686d22cd19061323c09190 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Fri, 8 Jan 2010 15:39:22 -0700 Subject: USB: fix crash in uhci_scan_schedule When hardware is removed on a Stratus, the system may crash like this: ACPI: PCI interrupt for device 0000:7c:00.1 disabled Trying to free nonexistent resource <00000000a8000000-00000000afffffff> Trying to free nonexistent resource <00000000a4800000-00000000a480ffff> uhci_hcd 0000:7e:1d.0: remove, state 1 usb usb2: USB disconnect, address 1 usb 2-1: USB disconnect, address 2 Unable to handle kernel paging request at 0000000000100100 RIP: [] :uhci_hcd:uhci_scan_schedule+0xa2/0x89c #4 [ffff81011de17e50] uhci_scan_schedule at ffffffff88021918 #5 [ffff81011de17ed0] uhci_irq at ffffffff88023cb8 #6 [ffff81011de17f10] usb_hcd_irq at ffffffff801f1c1f #7 [ffff81011de17f20] handle_IRQ_event at ffffffff8001123b #8 [ffff81011de17f50] __do_IRQ at ffffffff800ba749 This occurs because an interrupt scans uhci->skelqh, which is being freed. We do the right thing: disable the interrupts in the device, and do not do any processing if the interrupt is shared with other source, but it's possible that another CPU gets delayed somewhere (e.g. loops) until we started freeing. The agreed-upon solution is to wait for interrupts to play out before proceeding. No other bareers are neceesary. A backport of this patch was tested on a 2.6.18 based kernel. Testing of 2.6.32-based kernels is under way, but it takes us forever (months) to turn this around. So I think it's a good patch and we should keep it. Tracked in RH bz#516851 Signed-Off-By: Pete Zaitcev Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 99cd00f..0919706 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -735,6 +735,7 @@ static void uhci_stop(struct usb_hcd *hcd) uhci_hc_died(uhci); uhci_scan_schedule(uhci); spin_unlock_irq(&uhci->lock); + synchronize_irq(hcd->irq); del_timer_sync(&uhci->fsbr_timer); release_uhci(uhci); -- cgit v0.10.2 From f7410ced7f931bb1ad79d1336412cf7b7a33cb14 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 10 Jan 2010 20:15:03 +1100 Subject: USB: Move hcd free_dev call into usb_disconnect to fix oops USB: Move hcd free_dev call into usb_disconnect I found a way to oops the kernel: 1. Open a USB device through devio. 2. Remove the hcd module in the host kernel. 3. Close the devio file descriptor. The problem is that closing the file descriptor does usb_release_dev as it is the last reference. usb_release_dev then tries to invoke the hcd free_dev function (or rather dereferencing the hcd driver struct). This causes an oops as the hcd driver has already been unloaded so the struct is gone. This patch tries to fix this by bringing the free_dev call earlier and into usb_disconnect. I have verified that repeating the above steps no longer crashes with this patch applied. Signed-off-by: Herbert Xu Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index 8953ded..a3cdb09 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -248,7 +248,7 @@ struct hc_driver { /* xHCI specific functions */ /* Called by usb_alloc_dev to alloc HC device structures */ int (*alloc_dev)(struct usb_hcd *, struct usb_device *); - /* Called by usb_release_dev to free HC device structures */ + /* Called by usb_disconnect to free HC device structures */ void (*free_dev)(struct usb_hcd *, struct usb_device *); /* Bandwidth computation functions */ diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 0e0a190..e198ff8 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1524,6 +1524,15 @@ static void update_address(struct usb_device *udev, int devnum) udev->devnum = devnum; } +static void hub_free_dev(struct usb_device *udev) +{ + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + + /* Root hubs aren't real devices, so don't free HCD resources */ + if (hcd->driver->free_dev && udev->parent) + hcd->driver->free_dev(hcd, udev); +} + /** * usb_disconnect - disconnect a device (usbcore-internal) * @pdev: pointer to device being disconnected @@ -1592,6 +1601,8 @@ void usb_disconnect(struct usb_device **pdev) *pdev = NULL; spin_unlock_irq(&device_state_lock); + hub_free_dev(udev); + put_device(&udev->dev); } @@ -3166,6 +3177,7 @@ loop_disable: loop: usb_ep0_reinit(udev); release_address(udev); + hub_free_dev(udev); usb_put_dev(udev); if ((status == -ENOTCONN) || (status == -ENOTSUPP)) break; diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 32966cc..1297e9b 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -225,9 +225,6 @@ static void usb_release_dev(struct device *dev) hcd = bus_to_hcd(udev->bus); usb_destroy_configuration(udev); - /* Root hubs aren't real devices, so don't free HCD resources */ - if (hcd->driver->free_dev && udev->parent) - hcd->driver->free_dev(hcd, udev); usb_put_hcd(hcd); kfree(udev->product); kfree(udev->manufacturer); -- cgit v0.10.2 From 94089d56e456d2814c379538919180957a254e4a Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sat, 9 Jan 2010 21:57:44 +0100 Subject: USB: musb: don't dereference NULL tusb_dma in dma_controller_destroy() Test whether tusb_dma is not NULL before dereferencing Signed-off-by: Roel Kluin Cc: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c index e13c770..1c86809 100644 --- a/drivers/usb/musb/tusb6010_omap.c +++ b/drivers/usb/musb/tusb6010_omap.c @@ -648,7 +648,7 @@ void dma_controller_destroy(struct dma_controller *c) } } - if (!tusb_dma->multichannel && tusb_dma && tusb_dma->ch >= 0) + if (tusb_dma && !tusb_dma->multichannel && tusb_dma->ch >= 0) omap_free_dma(tusb_dma->ch); kfree(tusb_dma); -- cgit v0.10.2 From 1bd4f29d0af5b4b1c022d8fded14665dd5932905 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?N=C3=A9meth=20M=C3=A1rton?= Date: Sun, 10 Jan 2010 15:33:33 +0100 Subject: USB skeleton: make USB device id constant MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The id_table field of the struct usb_device_id is constant in so it is worth to make the initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // Signed-off-by: Németh Márton Cc: Julia Lawall Cc: cocci@diku.dk Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index b1e579c..6152278 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -28,7 +28,7 @@ #define USB_SKEL_PRODUCT_ID 0xfff0 /* table of devices that work with this driver */ -static struct usb_device_id skel_table[] = { +static const struct usb_device_id skel_table[] = { { USB_DEVICE(USB_SKEL_VENDOR_ID, USB_SKEL_PRODUCT_ID) }, { } /* Terminating entry */ }; -- cgit v0.10.2 From 6ef4852b1326301f6e9657e99b2c3221be1a3a44 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?N=C3=A9meth=20M=C3=A1rton?= Date: Sun, 10 Jan 2010 15:33:45 +0100 Subject: USB class: make USB device id constant MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The id_table field of the struct usb_device_id is constant in so it is worth to make the initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // Signed-off-by: Németh Márton Cc: Julia Lawall Cc: cocci@diku.dk Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 95f29a2..5155ff2 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1489,7 +1489,7 @@ static int acm_reset_resume(struct usb_interface *intf) * USB driver structure. */ -static struct usb_device_id acm_ids[] = { +static const struct usb_device_id acm_ids[] = { /* quirky and broken devices */ { USB_DEVICE(0x0870, 0x0001), /* Metricom GS Modem */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 3e564bf..18aafcb 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -31,7 +31,7 @@ #define DRIVER_AUTHOR "Oliver Neukum" #define DRIVER_DESC "USB Abstract Control Model driver for USB WCM Device Management" -static struct usb_device_id wdm_ids[] = { +static const struct usb_device_id wdm_ids[] = { { .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS | USB_DEVICE_ID_MATCH_INT_SUBCLASS, diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 9d8ec72..93b5f85 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -1390,7 +1390,7 @@ static int usblp_resume(struct usb_interface *intf) return r; } -static struct usb_device_id usblp_ids [] = { +static const struct usb_device_id usblp_ids[] = { { USB_DEVICE_INFO(7, 1, 1) }, { USB_DEVICE_INFO(7, 1, 2) }, { USB_DEVICE_INFO(7, 1, 3) }, diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 7c5f4e3..8588c09 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -48,7 +48,7 @@ */ #define USBTMC_MAX_READS_TO_CLEAR_BULK_IN 100 -static struct usb_device_id usbtmc_devices[] = { +static const struct usb_device_id usbtmc_devices[] = { { USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 0), }, { USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 1), }, { 0, } /* terminating entry */ diff --git a/drivers/usb/wusbcore/cbaf.c b/drivers/usb/wusbcore/cbaf.c index 25eae40..51a8e0d 100644 --- a/drivers/usb/wusbcore/cbaf.c +++ b/drivers/usb/wusbcore/cbaf.c @@ -641,7 +641,7 @@ static void cbaf_disconnect(struct usb_interface *iface) kzfree(cbaf); } -static struct usb_device_id cbaf_id_table[] = { +static const struct usb_device_id cbaf_id_table[] = { { USB_INTERFACE_INFO(0xef, 0x03, 0x01), }, { }, }; -- cgit v0.10.2 From 7d40d7e85a25e01948bcb4dc3eda1355af318337 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?N=C3=A9meth=20M=C3=A1rton?= Date: Sun, 10 Jan 2010 15:34:24 +0100 Subject: USB serial: make USB device id constant MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The id_table field of the struct usb_device_id is constant in so it is worth to make the initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // Signed-off-by: Németh Márton Cc: Julia Lawall Cc: cocci@diku.dk Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index b10ac84..2cbdc8f 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -78,7 +78,7 @@ static int debug; #define DRIVER_DESC "AIRcable USB Driver" /* ID table that will be registered with USB core */ -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(AIRCABLE_VID, AIRCABLE_USB_PID) }, { }, }; diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index a9c2dec..1f75fac 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -50,7 +50,7 @@ static int debug; /* usb timeout of 1 second */ #define ARK_TIMEOUT (1*HZ) -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(0x6547, 0x0232) }, { USB_DEVICE(0x18ec, 0x3118) }, /* USB to IrDA adapter */ { }, diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index a0467bc..1295e44 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -103,7 +103,7 @@ static int belkin_sa_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); -static struct usb_device_id id_table_combined [] = { +static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(BELKIN_SA_VID, BELKIN_SA_PID) }, { USB_DEVICE(BELKIN_OLD_VID, BELKIN_OLD_PID) }, { USB_DEVICE(PERACOM_VID, PERACOM_PID) }, diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 6230d24..9f4fed1 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -71,7 +71,7 @@ static int debug; -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(0x4348, 0x5523) }, { USB_DEVICE(0x1a86, 0x7523) }, { }, diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index bd254ec..61e15ef 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -55,7 +55,7 @@ static int cp210x_carrier_raised(struct usb_serial_port *p); static int debug; -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */ { USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */ { USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */ diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index b0f6402..23c8bd6 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -70,7 +70,7 @@ static void cyberjack_read_int_callback(struct urb *urb); static void cyberjack_read_bulk_callback(struct urb *urb); static void cyberjack_write_bulk_callback(struct urb *urb); -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(CYBERJACK_VENDOR_ID, CYBERJACK_PRODUCT_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index b19e16a..eee8726 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -87,24 +87,24 @@ static int unstable_bauds; #define CYPRESS_BUF_SIZE 1024 #define CYPRESS_CLOSING_WAIT (30*HZ) -static struct usb_device_id id_table_earthmate [] = { +static const struct usb_device_id id_table_earthmate[] = { { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) }, { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) }, { } /* Terminating entry */ }; -static struct usb_device_id id_table_cyphidcomrs232 [] = { +static const struct usb_device_id id_table_cyphidcomrs232[] = { { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) }, { } /* Terminating entry */ }; -static struct usb_device_id id_table_nokiaca42v2 [] = { +static const struct usb_device_id id_table_nokiaca42v2[] = { { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) }, { } /* Terminating entry */ }; -static struct usb_device_id id_table_combined [] = { +static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) }, { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) }, { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 68e80be..3b63484 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -470,18 +470,18 @@ static int digi_read_oob_callback(struct urb *urb); static int debug; -static struct usb_device_id id_table_combined [] = { +static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) }, { USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) }, { } /* Terminating entry */ }; -static struct usb_device_id id_table_2 [] = { +static const struct usb_device_id id_table_2[] = { { USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) }, { } /* Terminating entry */ }; -static struct usb_device_id id_table_4 [] = { +static const struct usb_device_id id_table_4[] = { { USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 7dd0e3e..d02e604 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -93,7 +93,7 @@ static void empeg_init_termios(struct tty_struct *tty); static void empeg_write_bulk_callback(struct urb *urb); static void empeg_read_bulk_callback(struct urb *urb); -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(EMPEG_VENDOR_ID, EMPEG_PRODUCT_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c index d30f736..e21ce9d 100644 --- a/drivers/usb/serial/funsoft.c +++ b/drivers/usb/serial/funsoft.c @@ -18,7 +18,7 @@ static int debug; -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1404, 0xcddc) }, { }, }; diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 5ac900e..6bbedfb 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -210,7 +210,7 @@ static unsigned char const PRIVATE_REQ[] -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { /* the same device id seems to be used by all usb enabled GPS devices */ { USB_DEVICE(GARMIN_VENDOR_ID, 3) }, diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 83443d6..0b1c473 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -41,7 +41,7 @@ static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */ /* we want to look at all devices, as the vendor/product id can change * depending on the command line argument */ -static struct usb_device_id generic_serial_ids[] = { +static const struct usb_device_id generic_serial_ids[] = { {.driver_info = 42}, {} }; diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c index 4313292..8093791 100644 --- a/drivers/usb/serial/hp4x.c +++ b/drivers/usb/serial/hp4x.c @@ -29,7 +29,7 @@ #define HP_VENDOR_ID 0x03f0 #define HP49GP_PRODUCT_ID 0x0121 -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(HP_VENDOR_ID, HP49GP_PRODUCT_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h index 9241d31..feb56a4 100644 --- a/drivers/usb/serial/io_tables.h +++ b/drivers/usb/serial/io_tables.h @@ -14,7 +14,7 @@ #ifndef IO_TABLES_H #define IO_TABLES_H -static struct usb_device_id edgeport_2port_id_table [] = { +static const struct usb_device_id edgeport_2port_id_table[] = { { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2) }, { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2I) }, { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_421) }, @@ -23,7 +23,7 @@ static struct usb_device_id edgeport_2port_id_table [] = { { } }; -static struct usb_device_id edgeport_4port_id_table [] = { +static const struct usb_device_id edgeport_4port_id_table[] = { { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4) }, { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_RAPIDPORT_4) }, { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4T) }, @@ -37,7 +37,7 @@ static struct usb_device_id edgeport_4port_id_table [] = { { } }; -static struct usb_device_id edgeport_8port_id_table [] = { +static const struct usb_device_id edgeport_8port_id_table[] = { { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8) }, { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU) }, { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8I) }, @@ -47,7 +47,7 @@ static struct usb_device_id edgeport_8port_id_table [] = { { } }; -static struct usb_device_id Epic_port_id_table [] = { +static const struct usb_device_id Epic_port_id_table[] = { { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0202) }, { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0203) }, { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0310) }, @@ -60,7 +60,7 @@ static struct usb_device_id Epic_port_id_table [] = { }; /* Devices that this driver supports */ -static struct usb_device_id id_table_combined [] = { +static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4) }, { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_RAPIDPORT_4) }, { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4T) }, diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 1691f07..8f0aa64 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -134,7 +134,7 @@ struct edgeport_serial { /* Devices that this driver supports */ -static struct usb_device_id edgeport_1port_id_table [] = { +static const struct usb_device_id edgeport_1port_id_table[] = { { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_1) }, { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1) }, { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1I) }, @@ -154,7 +154,7 @@ static struct usb_device_id edgeport_1port_id_table [] = { { } }; -static struct usb_device_id edgeport_2port_id_table [] = { +static const struct usb_device_id edgeport_2port_id_table[] = { { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2) }, { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2C) }, { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2I) }, @@ -177,7 +177,7 @@ static struct usb_device_id edgeport_2port_id_table [] = { }; /* Devices that this driver supports */ -static struct usb_device_id id_table_combined [] = { +static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_1) }, { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1) }, { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1I) }, diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 727d323..c0afa7a 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -134,7 +134,7 @@ enum { #define IPW_WANTS_TO_SEND 0x30 -static struct usb_device_id usb_ipw_ids[] = { +static const struct usb_device_id usb_ipw_ids[] = { { USB_DEVICE(IPW_VID, IPW_PID) }, { }, }; diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 95d8d26..fc2ab81 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -100,7 +100,7 @@ static u8 ir_baud; static u8 ir_xbof; static u8 ir_add_bof; -static struct usb_device_id ir_id_table[] = { +static const struct usb_device_id ir_id_table[] = { { USB_DEVICE(0x050f, 0x0180) }, /* KC Technology, KC-180 */ { USB_DEVICE(0x08e9, 0x0100) }, /* XTNDAccess */ { USB_DEVICE(0x09c4, 0x0011) }, /* ACTiSys ACT-IR2000U */ diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index e6e02b1..43f13cf 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -43,7 +43,7 @@ static int debug; #define DRIVER_VERSION "v0.11" #define DRIVER_DESC "Infinity USB Unlimited Phoenix driver" -static struct usb_device_id id_table[] = { +static const struct usb_device_id id_table[] = { {USB_DEVICE(IUU_USB_VENDOR_ID, IUU_USB_PRODUCT_ID)}, {} /* Terminating entry */ }; diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index 30771e5..bf3297d 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -456,7 +456,7 @@ static const struct keyspan_device_details *keyspan_devices[] = { NULL, }; -static struct usb_device_id keyspan_ids_combined[] = { +static const struct usb_device_id keyspan_ids_combined[] = { { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) }, @@ -497,7 +497,7 @@ static struct usb_driver keyspan_driver = { }; /* usb_device_id table for the pre-firmware download keyspan devices */ -static struct usb_device_id keyspan_pre_ids[] = { +static const struct usb_device_id keyspan_pre_ids[] = { { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) }, @@ -513,7 +513,7 @@ static struct usb_device_id keyspan_pre_ids[] = { { } /* Terminating entry */ }; -static struct usb_device_id keyspan_1port_ids[] = { +static const struct usb_device_id keyspan_1port_ids[] = { { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) }, @@ -524,7 +524,7 @@ static struct usb_device_id keyspan_1port_ids[] = { { } /* Terminating entry */ }; -static struct usb_device_id keyspan_2port_ids[] = { +static const struct usb_device_id keyspan_2port_ids[] = { { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) }, @@ -532,7 +532,7 @@ static struct usb_device_id keyspan_2port_ids[] = { { } /* Terminating entry */ }; -static struct usb_device_id keyspan_4port_ids[] = { +static const struct usb_device_id keyspan_4port_ids[] = { { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)}, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)}, diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 427d377..4efde03 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -125,7 +125,7 @@ struct keyspan_pda_private { #define ENTREGRA_VENDOR_ID 0x1645 #define ENTREGRA_FAKE_ID 0x8093 -static struct usb_device_id id_table_combined [] = { +static const struct usb_device_id id_table_combined[] = { #ifdef KEYSPAN { USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_FAKE_ID) }, #endif @@ -147,20 +147,20 @@ static struct usb_driver keyspan_pda_driver = { .no_dynamic_id = 1, }; -static struct usb_device_id id_table_std [] = { +static const struct usb_device_id id_table_std[] = { { USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_ID) }, { } /* Terminating entry */ }; #ifdef KEYSPAN -static struct usb_device_id id_table_fake [] = { +static const struct usb_device_id id_table_fake[] = { { USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_FAKE_ID) }, { } /* Terminating entry */ }; #endif #ifdef XIRCOM -static struct usb_device_id id_table_fake_xircom [] = { +static const struct usb_device_id id_table_fake_xircom[] = { { USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) }, { USB_DEVICE(ENTREGRA_VENDOR_ID, ENTREGRA_FAKE_ID) }, { } diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 731964b..2dbe22a 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -94,7 +94,7 @@ static int klsi_105_tiocmset(struct tty_struct *tty, struct file *file, /* * All of the device info needed for the KLSI converters. */ -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(PALMCONNECT_VID, PALMCONNECT_PID) }, { USB_DEVICE(KLSI_VID, KLSI_KL5KUSB105D_PID) }, { } /* Terminating entry */ diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index f917c5b..fc78553 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -86,7 +86,7 @@ static void kobil_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); static void kobil_init_termios(struct tty_struct *tty); -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_ADAPTER_B_PRODUCT_ID) }, { USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_ADAPTER_K_PRODUCT_ID) }, { USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_USBTWIN_PRODUCT_ID) }, diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 8650383..2849f8c 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -111,7 +111,7 @@ static void mct_u232_unthrottle(struct tty_struct *tty); /* * All of the device info needed for the MCT USB-RS232 converter. */ -static struct usb_device_id id_table_combined [] = { +static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(MCT_U232_VID, MCT_U232_PID) }, { USB_DEVICE(MCT_U232_VID, MCT_U232_SITECOM_PID) }, { USB_DEVICE(MCT_U232_VID, MCT_U232_DU_H3SP_PID) }, diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index e081dc0..2ce1a2a 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -85,7 +85,7 @@ static int debug; #define MOSCHIP_DEVICE_ID_7720 0x7720 #define MOSCHIP_DEVICE_ID_7715 0x7715 -static struct usb_device_id moschip_port_id_table[] = { +static const struct usb_device_id moschip_port_id_table[] = { { USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7720) }, { } /* terminating entry */ }; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 04bef4b..c89a89c 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -181,7 +181,7 @@ #define URB_TRANSFER_BUFFER_SIZE 32 /* URB Size */ -static struct usb_device_id moschip_port_id_table[] = { +static const struct usb_device_id moschip_port_id_table[] = { {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)}, {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)}, @@ -198,7 +198,7 @@ static struct usb_device_id moschip_port_id_table[] = { {} /* terminating entry */ }; -static __devinitdata struct usb_device_id moschip_id_table_combined[] = { +static const struct usb_device_id moschip_id_table_combined[] __devinitconst = { {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)}, {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)}, diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c index 99bd00f5..cf17183 100644 --- a/drivers/usb/serial/moto_modem.c +++ b/drivers/usb/serial/moto_modem.c @@ -21,7 +21,7 @@ #include #include -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(0x05c6, 0x3197) }, /* unknown Motorola phone */ { USB_DEVICE(0x0c44, 0x0022) }, /* unknown Mororola phone */ { USB_DEVICE(0x22b8, 0x2a64) }, /* Motorola KRZR K1m */ diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c index 5ceaa4c6..efa61bc 100644 --- a/drivers/usb/serial/navman.c +++ b/drivers/usb/serial/navman.c @@ -22,7 +22,7 @@ static int debug; -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(0x0a99, 0x0001) }, /* Talon Technology device */ { }, }; diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 0622650..38762a0 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -75,7 +75,7 @@ static void omninet_disconnect(struct usb_serial *serial); static void omninet_release(struct usb_serial *serial); static int omninet_attach(struct usb_serial *serial); -static struct usb_device_id id_table[] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) }, { USB_DEVICE(ZYXEL_VENDOR_ID, BT_IGNITIONPRO_ID) }, { } /* Terminating entry */ diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 4cdb975..a654317 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -22,7 +22,7 @@ static int debug; -static struct usb_device_id id_table[] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(0x065a, 0x0009) }, { }, }; diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 6e94a67..d34b4cf 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -344,7 +344,7 @@ static int option_resume(struct usb_serial *serial); #define HAIER_VENDOR_ID 0x201e #define HAIER_PRODUCT_CE100 0x2009 -static struct usb_device_id option_ids[] = { +static const struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_LIGHT) }, diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index 2ae97e7..8397334 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -58,7 +58,7 @@ #define OTI6858_AUTHOR "Tomasz Michal Lukaszewski " #define OTI6858_VERSION "0.1" -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(OTI6858_VENDOR_ID, OTI6858_PRODUCT_ID) }, { } }; diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 9ec1a49..767000c 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -50,7 +50,7 @@ struct pl2303_buf { char *buf_put; }; -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) }, diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 7528b8d..310ff6e 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -21,7 +21,7 @@ static int debug; -static struct usb_device_id id_table[] = { +static const struct usb_device_id id_table[] = { {USB_DEVICE(0x05c6, 0x9211)}, /* Acer Gobi QDL device */ {USB_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ {USB_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */ diff --git a/drivers/usb/serial/siemens_mpi.c b/drivers/usb/serial/siemens_mpi.c index 951ea0c..cb8195c 100644 --- a/drivers/usb/serial/siemens_mpi.c +++ b/drivers/usb/serial/siemens_mpi.c @@ -22,7 +22,7 @@ #define DRIVER_DESC "Driver for Siemens USB/MPI adapter" -static struct usb_device_id id_table[] = { +static const struct usb_device_id id_table[] = { /* Vendor and product id for 6ES7-972-0CB20-0XA0 */ { USB_DEVICE(0x908, 0x0004) }, { }, diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 3eb6143..ea27f7d 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -226,7 +226,7 @@ static const struct sierra_iface_info direct_ip_interface_blacklist = { .ifaceinfo = direct_ip_non_serial_ifaces, }; -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */ { USB_DEVICE(0x03F0, 0x1B1D) }, /* HP ev2200 a.k.a MC5720 */ { USB_DEVICE(0x03F0, 0x1E1D) }, /* HP hs2300 a.k.a MC8775 */ diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 1e58220..ebd1688 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -45,7 +45,7 @@ static int debug; #define SPCP8x5_835_VID 0x04fc #define SPCP8x5_835_PID 0x0231 -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)}, { USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)}, { USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)}, diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c index b282c0f..1a76bc5 100644 --- a/drivers/usb/serial/symbolserial.c +++ b/drivers/usb/serial/symbolserial.c @@ -21,7 +21,7 @@ static int debug; -static struct usb_device_id id_table[] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(0x05e0, 0x0600) }, { }, }; diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c index 7b5bfc4..252cc2d 100644 --- a/drivers/usb/serial/usb_debug.c +++ b/drivers/usb/serial/usb_debug.c @@ -29,7 +29,7 @@ static char USB_DEBUG_BRK[USB_DEBUG_BRK_SIZE] = { 0xff, }; -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(0x0525, 0x127a) }, { }, }; diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 1093d2e..e89e0d5 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -111,17 +111,17 @@ static int debug; separate ID tables, and then a third table that combines them just for the purpose of exporting the autoloading information. */ -static struct usb_device_id id_table_std [] = { +static const struct usb_device_id id_table_std[] = { { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) }, { } /* Terminating entry */ }; -static struct usb_device_id id_table_prerenumeration [] = { +static const struct usb_device_id id_table_prerenumeration[] = { { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) }, { } /* Terminating entry */ }; -static struct usb_device_id id_table_combined [] = { +static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) }, { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) }, { } /* Terminating entry */ -- cgit v0.10.2 From 9052127f631c8d71d5149da08d48014283faff2f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?N=C3=A9meth=20M=C3=A1rton?= Date: Sun, 10 Jan 2010 15:34:36 +0100 Subject: USB image: make USB device id constant MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The id_table field of the struct usb_device_id is constant in so it is worth to make the initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // Signed-off-by: Németh Márton Cc: Julia Lawall Cc: cocci@diku.dk Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c index eca355d..e192e8f 100644 --- a/drivers/usb/image/mdc800.c +++ b/drivers/usb/image/mdc800.c @@ -967,7 +967,7 @@ static const struct file_operations mdc800_device_ops = -static struct usb_device_id mdc800_table [] = { +static const struct usb_device_id mdc800_table[] = { { USB_DEVICE(MDC800_VENDOR_ID, MDC800_PRODUCT_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c index 459a728..3a6bcd5 100644 --- a/drivers/usb/image/microtek.c +++ b/drivers/usb/image/microtek.c @@ -155,7 +155,7 @@ static int mts_usb_probe(struct usb_interface *intf, const struct usb_device_id *id); static void mts_usb_disconnect(struct usb_interface *intf); -static struct usb_device_id mts_usb_ids []; +static const struct usb_device_id mts_usb_ids[]; static struct usb_driver mts_usb_driver = { .name = "microtekX6", @@ -656,7 +656,7 @@ static struct scsi_host_template mts_scsi_host_template = { /* The entries of microtek_table must correspond, line-by-line to the entries of mts_supported_products[]. */ -static struct usb_device_id mts_usb_ids [] = +static const struct usb_device_id mts_usb_ids[] = { { USB_DEVICE(0x4ce, 0x0300) }, { USB_DEVICE(0x5da, 0x0094) }, -- cgit v0.10.2 From 33b9e16243fd69493be3ddda7be73226c8be586a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?N=C3=A9meth=20M=C3=A1rton?= Date: Sun, 10 Jan 2010 15:34:45 +0100 Subject: USB misc: make USB device id constant MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The id_table field of the struct usb_device_id is constant in so it is worth to make the initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // Signed-off-by: Németh Márton Cc: Julia Lawall Cc: cocci@diku.dk Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c index 2035265..306e978 100644 --- a/drivers/usb/misc/adutux.c +++ b/drivers/usb/misc/adutux.c @@ -56,7 +56,7 @@ MODULE_PARM_DESC(debug, "Debug enabled or not"); #define ADU_PRODUCT_ID 0x0064 /* table of devices that work with this driver */ -static struct usb_device_id device_table [] = { +static const struct usb_device_id device_table[] = { { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID) }, /* ADU100 */ { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+20) }, /* ADU120 */ { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+30) }, /* ADU130 */ diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index 1eb9e41..516079d 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -57,7 +57,7 @@ .bInterfaceProtocol = 0x00 /* table of devices that work with this driver */ -static struct usb_device_id appledisplay_table [] = { +static const struct usb_device_id appledisplay_table[] = { { APPLEDISPLAY_DEVICE(0x9218) }, { APPLEDISPLAY_DEVICE(0x9219) }, { APPLEDISPLAY_DEVICE(0x921c) }, diff --git a/drivers/usb/misc/berry_charge.c b/drivers/usb/misc/berry_charge.c index c05a85b..a96e58c 100644 --- a/drivers/usb/misc/berry_charge.c +++ b/drivers/usb/misc/berry_charge.c @@ -39,7 +39,7 @@ static int pearl_dual_mode = 1; if (debug) \ dev_printk(KERN_DEBUG , dev , format , ## arg) -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(RIM_VENDOR, BLACKBERRY) }, { USB_DEVICE(RIM_VENDOR, BLACKBERRY_PEARL) }, { USB_DEVICE(RIM_VENDOR, BLACKBERRY_PEARL_DUAL) }, diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c index 5720bfe..1547d8c 100644 --- a/drivers/usb/misc/cypress_cy7c63.c +++ b/drivers/usb/misc/cypress_cy7c63.c @@ -56,7 +56,7 @@ /* table of devices that work with this driver */ -static struct usb_device_id cypress_table [] = { +static const struct usb_device_id cypress_table[] = { { USB_DEVICE(CYPRESS_VENDOR_ID, CYPRESS_PRODUCT_ID) }, { } }; diff --git a/drivers/usb/misc/cytherm.c b/drivers/usb/misc/cytherm.c index 4fb3c38..b9cbbbd 100644 --- a/drivers/usb/misc/cytherm.c +++ b/drivers/usb/misc/cytherm.c @@ -27,7 +27,7 @@ #define USB_SKEL_VENDOR_ID 0x04b4 #define USB_SKEL_PRODUCT_ID 0x0002 -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(USB_SKEL_VENDOR_ID, USB_SKEL_PRODUCT_ID) }, { } }; diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c index 879a980..a6521c9 100644 --- a/drivers/usb/misc/emi26.c +++ b/drivers/usb/misc/emi26.c @@ -245,7 +245,7 @@ wraperr: return err; } -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(EMI26_VENDOR_ID, EMI26_PRODUCT_ID) }, { USB_DEVICE(EMI26_VENDOR_ID, EMI26B_PRODUCT_ID) }, { } /* Terminating entry */ diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c index 59860b3..fc15ad4 100644 --- a/drivers/usb/misc/emi62.c +++ b/drivers/usb/misc/emi62.c @@ -259,7 +259,7 @@ wraperr: return err; } -static __devinitdata struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] __devinitconst = { { USB_DEVICE(EMI62_VENDOR_ID, EMI62_PRODUCT_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index 9d0675e..f21bf51 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -86,7 +86,7 @@ static struct list_head ftdi_static_list; #define USB_FTDI_ELAN_VENDOR_ID 0x0403 #define USB_FTDI_ELAN_PRODUCT_ID 0xd6ea /* table of devices that work with this driver*/ -static struct usb_device_id ftdi_elan_table[] = { +static const struct usb_device_id ftdi_elan_table[] = { {USB_DEVICE(USB_FTDI_ELAN_VENDOR_ID, USB_FTDI_ELAN_PRODUCT_ID)}, { /* Terminating entry */ } }; diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c index 1337a9c..a54c3cb 100644 --- a/drivers/usb/misc/idmouse.c +++ b/drivers/usb/misc/idmouse.c @@ -48,7 +48,7 @@ #define ID_CHERRY 0x0010 /* device ID table */ -static struct usb_device_id idmouse_table[] = { +static const struct usb_device_id idmouse_table[] = { {USB_DEVICE(ID_SIEMENS, ID_IDMOUSE)}, /* Siemens ID Mouse (Professional) */ {USB_DEVICE(ID_SIEMENS, ID_CHERRY )}, /* Cherry FingerTIP ID Board */ {} /* terminating null entry */ diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c index e75bb87..5206423 100644 --- a/drivers/usb/misc/iowarrior.c +++ b/drivers/usb/misc/iowarrior.c @@ -139,7 +139,7 @@ static int usb_set_report(struct usb_interface *intf, unsigned char type, /* driver registration */ /*---------------------*/ /* table of devices that work with this driver */ -static struct usb_device_id iowarrior_ids[] = { +static const struct usb_device_id iowarrior_ids[] = { {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW40)}, {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW24)}, {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOWPV1)}, diff --git a/drivers/usb/misc/isight_firmware.c b/drivers/usb/misc/isight_firmware.c index b897f65..0316c01 100644 --- a/drivers/usb/misc/isight_firmware.c +++ b/drivers/usb/misc/isight_firmware.c @@ -26,7 +26,7 @@ #include #include -static struct usb_device_id id_table[] = { +static const struct usb_device_id id_table[] = { {USB_DEVICE(0x05ac, 0x8300)}, {}, }; diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c index 90f1301..7c0bd13 100644 --- a/drivers/usb/misc/ldusb.c +++ b/drivers/usb/misc/ldusb.c @@ -69,7 +69,7 @@ #endif /* table of devices that work with this driver */ -static struct usb_device_id ld_usb_table [] = { +static const struct usb_device_id ld_usb_table[] = { { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MOBILECASSY) }, diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index faa6d62..3d4378f 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -192,7 +192,7 @@ struct tower_get_version_reply { /* table of devices that work with this driver */ -static struct usb_device_id tower_table [] = { +static const struct usb_device_id tower_table[] = { { USB_DEVICE(LEGO_USB_TOWER_VENDOR_ID, LEGO_USB_TOWER_PRODUCT_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c index 32d0199..17e4eec 100644 --- a/drivers/usb/misc/rio500.c +++ b/drivers/usb/misc/rio500.c @@ -510,7 +510,7 @@ static void disconnect_rio(struct usb_interface *intf) } } -static struct usb_device_id rio_table [] = { +static const struct usb_device_id rio_table[] = { { USB_DEVICE(0x0841, 1) }, /* Rio 500 */ { } /* Terminating entry */ }; diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 8b37a4b..bb0b315 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -3238,7 +3238,7 @@ static void sisusb_disconnect(struct usb_interface *intf) kref_put(&sisusb->kref, sisusb_delete); } -static struct usb_device_id sisusb_table [] = { +static const struct usb_device_id sisusb_table[] = { { USB_DEVICE(0x0711, 0x0550) }, { USB_DEVICE(0x0711, 0x0900) }, { USB_DEVICE(0x0711, 0x0901) }, diff --git a/drivers/usb/misc/trancevibrator.c b/drivers/usb/misc/trancevibrator.c index 2e14102..5da28ea 100644 --- a/drivers/usb/misc/trancevibrator.c +++ b/drivers/usb/misc/trancevibrator.c @@ -33,7 +33,7 @@ #define TRANCEVIBRATOR_VENDOR_ID 0x0b49 /* ASCII Corporation */ #define TRANCEVIBRATOR_PRODUCT_ID 0x064f /* Trance Vibrator */ -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(TRANCEVIBRATOR_VENDOR_ID, TRANCEVIBRATOR_PRODUCT_ID) }, { }, }; diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c index 4fb1203..499d750 100644 --- a/drivers/usb/misc/usblcd.c +++ b/drivers/usb/misc/usblcd.c @@ -30,7 +30,7 @@ #define IOCTL_GET_DRV_VERSION 2 -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { .idVendor = 0x10D2, .match_flags = USB_DEVICE_ID_MATCH_VENDOR, }, { }, }; diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c index 06cb719..63da2c3 100644 --- a/drivers/usb/misc/usbled.c +++ b/drivers/usb/misc/usbled.c @@ -24,7 +24,7 @@ #define PRODUCT_ID 0x1223 /* table of devices that work with this driver */ -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(VENDOR_ID, PRODUCT_ID) }, { }, }; diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c index 3db2555..a9555cb 100644 --- a/drivers/usb/misc/usbsevseg.c +++ b/drivers/usb/misc/usbsevseg.c @@ -27,7 +27,7 @@ #define MAXLEN 6 /* table of devices that work with this driver */ -static struct usb_device_id id_table[] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(VENDOR_ID, PRODUCT_ID) }, { }, }; diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 707a87d..a21cce6 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -2097,7 +2097,7 @@ static struct usbtest_info generic_info = { #endif -static struct usb_device_id id_table [] = { +static const struct usb_device_id id_table[] = { /*-------------------------------------------------------------*/ diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c index 9a6c27a..f56fed5 100644 --- a/drivers/usb/misc/uss720.c +++ b/drivers/usb/misc/uss720.c @@ -770,7 +770,7 @@ static void uss720_disconnect(struct usb_interface *intf) } /* table of cables that work through this driver */ -static struct usb_device_id uss720_table [] = { +static const struct usb_device_id uss720_table[] = { { USB_DEVICE(0x047e, 0x1001) }, { USB_DEVICE(0x0557, 0x2001) }, { USB_DEVICE(0x0729, 0x1284) }, diff --git a/drivers/usb/misc/vstusb.c b/drivers/usb/misc/vstusb.c index f26ea8d..874c81b 100644 --- a/drivers/usb/misc/vstusb.c +++ b/drivers/usb/misc/vstusb.c @@ -61,7 +61,7 @@ #define VST_MAXBUFFER (64*1024) -static struct usb_device_id id_table[] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(USB_VENDOR_OCEANOPTICS, USB_PRODUCT_USB2000)}, { USB_DEVICE(USB_VENDOR_OCEANOPTICS, USB_PRODUCT_HR4000)}, { USB_DEVICE(USB_VENDOR_OCEANOPTICS, USB_PRODUCT_USB650)}, -- cgit v0.10.2 From 1e927d96cb5db0851cc5b9031f476b12a3e05182 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?N=C3=A9meth=20M=C3=A1rton?= Date: Sun, 10 Jan 2010 15:34:53 +0100 Subject: USB hub: make USB device id constant MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The id_table field of the struct usb_device_id is constant in so it is worth to make the initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // Signed-off-by: Németh Márton Cc: Julia Lawall Cc: cocci@diku.dk Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index e198ff8..0940ccd 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3432,7 +3432,7 @@ static int hub_thread(void *__unused) return 0; } -static struct usb_device_id hub_id_table [] = { +static const struct usb_device_id hub_id_table[] = { { .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS, .bDeviceClass = USB_CLASS_HUB}, { .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS, -- cgit v0.10.2 From c4386ad07c318ae6188190e63b517ecc5ee3c883 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?N=C3=A9meth=20M=C3=A1rton?= Date: Sun, 10 Jan 2010 15:35:03 +0100 Subject: USB host: make Open Firmware device id constant MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The match_table field of the struct of_device_id is constant in so it is worth to make the initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // Signed-off-by: Németh Márton Cc: Julia Lawall Cc: cocci@diku.dk Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c index 36f96da..870b98e 100644 --- a/drivers/usb/host/ehci-ppc-of.c +++ b/drivers/usb/host/ehci-ppc-of.c @@ -264,7 +264,7 @@ static int ehci_hcd_ppc_of_shutdown(struct of_device *op) } -static struct of_device_id ehci_hcd_ppc_of_match[] = { +static const struct of_device_id ehci_hcd_ppc_of_match[] = { { .compatible = "usb-ehci", }, diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c index a5861531..4937de7 100644 --- a/drivers/usb/host/ehci-xilinx-of.c +++ b/drivers/usb/host/ehci-xilinx-of.c @@ -281,7 +281,7 @@ static int ehci_hcd_xilinx_of_shutdown(struct of_device *op) } -static struct of_device_id ehci_hcd_xilinx_of_match[] = { +static const struct of_device_id ehci_hcd_xilinx_of_match[] = { {.compatible = "xlnx,xps-usb-host-1.00.a",}, {}, }; diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c index ed4b87c..5dcfb3d 100644 --- a/drivers/usb/host/fhci-hcd.c +++ b/drivers/usb/host/fhci-hcd.c @@ -805,7 +805,7 @@ static int __devexit of_fhci_remove(struct of_device *ofdev) return fhci_remove(&ofdev->dev); } -static struct of_device_id of_fhci_match[] = { +static const struct of_device_id of_fhci_match[] = { { .compatible = "fsl,mpc8323-qe-usb", }, {}, }; diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c index 1c9f977..4293cfd 100644 --- a/drivers/usb/host/isp1760-if.c +++ b/drivers/usb/host/isp1760-if.c @@ -109,7 +109,7 @@ static int of_isp1760_remove(struct of_device *dev) return 0; } -static struct of_device_id of_isp1760_match[] = { +static const struct of_device_id of_isp1760_match[] = { { .compatible = "nxp,usb-isp1760", }, diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c index 68a3017..2a7def1 100644 --- a/drivers/usb/host/ohci-ppc-of.c +++ b/drivers/usb/host/ohci-ppc-of.c @@ -212,7 +212,7 @@ static int ohci_hcd_ppc_of_shutdown(struct of_device *op) } -static struct of_device_id ohci_hcd_ppc_of_match[] = { +static const struct of_device_id ohci_hcd_ppc_of_match[] = { #ifdef CONFIG_USB_OHCI_HCD_PPC_OF_BE { .name = "usb", -- cgit v0.10.2 From 07824d3d69e923a5173f9066469c81d83c8d6eab Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?N=C3=A9meth=20M=C3=A1rton?= Date: Sun, 10 Jan 2010 15:35:14 +0100 Subject: USB gadget: make Open Firmware device id constant MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The match_table field of the struct of_device_id is constant in so it is worth to make ace_of_match also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // Signed-off-by: Németh Márton Cc: Julia Lawall Cc: cocci@diku.dk Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c index 7881f12..3537d51 100644 --- a/drivers/usb/gadget/fsl_qe_udc.c +++ b/drivers/usb/gadget/fsl_qe_udc.c @@ -2749,7 +2749,7 @@ static int __devexit qe_udc_remove(struct of_device *ofdev) } /*-------------------------------------------------------------------------*/ -static struct of_device_id __devinitdata qe_udc_match[] = { +static const struct of_device_id qe_udc_match[] __devinitconst = { { .compatible = "fsl,mpc8323-qe-usb", .data = (void *)PORT_QE, -- cgit v0.10.2 From 1ba2557f298a64af4419ca094c5ecf99dc775354 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?N=C3=A9meth=20M=C3=A1rton?= Date: Sun, 10 Jan 2010 15:35:23 +0100 Subject: USB goku_udc: make PCI device id constant MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The id_table field of the struct pci_driver is constant in so it is worth to make pci_ids also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // Signed-off-by: Németh Márton Cc: Julia Lawall Cc: cocci@diku.dk Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c index 112bb40..e8edc64 100644 --- a/drivers/usb/gadget/goku_udc.c +++ b/drivers/usb/gadget/goku_udc.c @@ -1859,7 +1859,7 @@ done: /*-------------------------------------------------------------------------*/ -static struct pci_device_id pci_ids [] = { { +static const struct pci_device_id pci_ids[] = { { .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), .class_mask = ~0, .vendor = 0x102f, /* Toshiba */ -- cgit v0.10.2 From 79da01d79e0f2c8d2d6f1b823fce429877c423a7 Mon Sep 17 00:00:00 2001 From: Gernot Hillier Date: Mon, 11 Jan 2010 09:06:44 +0100 Subject: USB: serial: option.c: Add chipset information for 4G W14 Carsten Juttner thankfully investigated a bit and found out some details about the chipset used in the 4G W14 device I recently added to option.c. I think this information is useful for reference, so I'd be happy if you could include those bits. Signed-off-by: Gernot Hillier Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index d34b4cf..b4fe9ff 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -338,6 +338,8 @@ static int option_resume(struct usb_serial *serial); /* 4G Systems products */ #define FOUR_G_SYSTEMS_VENDOR_ID 0x1c9e +/* This is the 4G XS Stick W14 a.k.a. Mobilcom Debitel Surf-Stick * + * It seems to contain a Qualcomm QSC6240/6290 chipset */ #define FOUR_G_SYSTEMS_PRODUCT_W14 0x9603 /* Haier products */ -- cgit v0.10.2 From cc175ce2c01fc78dbf98a2b00f23d8863de20764 Mon Sep 17 00:00:00 2001 From: Gernot Hillier Date: Mon, 11 Jan 2010 09:30:00 +0100 Subject: USB: serial: option.c: Add blacklisting infrastructure for special device handling As suggested by Matthias Urlichs, this patch adds a somehow generic mechanism for special handling of devices which don't support all bits expected by this driver. The blacklisting code is heavily stolen from sierra.c, but extended to support different special cases. For now, one case is implemented (OPTION_BLACKLIST_SENDSETUP), targeted at the 4G W14 device: devices which don't understand the setting of RTS/DTR in option_send_setup() causing a USB timeout of 5 s in any userspace open() which leads to errors in most userspace applications. In addition, I prepared another case for devices with interfaces which shall not be accessed by this driver (targeted at the D-Link DWM 652). However, OPTION_BLACKLIST_RESERVED_IF is not fully implemented yet as I have no device to test this. Anyone volunteering to help here? If not, I'll contact the guys who added D-Link DWM 652 support soon. Signed-off-by: Gernot Hillier Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index b4fe9ff..85e5fc0 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -346,6 +346,19 @@ static int option_resume(struct usb_serial *serial); #define HAIER_VENDOR_ID 0x201e #define HAIER_PRODUCT_CE100 0x2009 +/* some devices interfaces need special handling due to a number of reasons */ +enum option_blacklist_reason { + OPTION_BLACKLIST_NONE = 0, + OPTION_BLACKLIST_SENDSETUP = 1, + OPTION_BLACKLIST_RESERVED_IF = 2 +}; + +struct option_blacklist_info { + const u32 infolen; /* number of interface numbers on blacklist */ + const u8 *ifaceinfo; /* pointer to the array holding the numbers */ + enum option_blacklist_reason reason; +}; + static const struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -711,6 +724,7 @@ struct option_intf_private { spinlock_t susp_lock; unsigned int suspended:1; int in_flight; + struct option_blacklist_info *blacklist_info; }; struct option_port_private { @@ -780,9 +794,27 @@ static int option_probe(struct usb_serial *serial, if (!data) return -ENOMEM; spin_lock_init(&data->susp_lock); + data->blacklist_info = (struct option_blacklist_info*) id->driver_info; return 0; } +static enum option_blacklist_reason is_blacklisted(const u8 ifnum, + const struct option_blacklist_info *blacklist) +{ + const u8 *info; + int i; + + if (blacklist) { + info = blacklist->ifaceinfo; + + for (i = 0; i < blacklist->infolen; i++) { + if (info[i] == ifnum) + return blacklist->reason; + } + } + return OPTION_BLACKLIST_NONE; +} + static void option_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { @@ -1213,11 +1245,19 @@ static void option_setup_urbs(struct usb_serial *serial) static int option_send_setup(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; + struct option_intf_private *intfdata = + (struct option_intf_private *) serial->private; struct option_port_private *portdata; int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber; int val = 0; dbg("%s", __func__); + if (is_blacklisted(ifNum, intfdata->blacklist_info) == + OPTION_BLACKLIST_SENDSETUP) { + dbg("No send_setup on blacklisted interface #%d\n", ifNum); + return -EIO; + } + portdata = usb_get_serial_port_data(port); if (portdata->dtr_state) -- cgit v0.10.2 From a74171005f2f6474e05bdfccb05c9f0d68224a49 Mon Sep 17 00:00:00 2001 From: Gernot Hillier Date: Mon, 11 Jan 2010 09:35:17 +0100 Subject: USB: serial: option.c: Add 4G W14 stick to blacklist for option_send_setup The 4G XS Stick W14 seems to not understand RTS/DTR setting in option_send_setup causing long timeouts on any open() which disturbs a lot of well-known userspace applications like minicom or ModemManager. Therefore, we enable OPTION_BLACKLIST_SENDSETUP blacklisting for it. Signed-off-by: Gernot Hillier Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 85e5fc0..51b0beb 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -359,6 +359,13 @@ struct option_blacklist_info { enum option_blacklist_reason reason; }; +static const u8 four_g_w14_no_sendsetup[] = { 0, 1 }; +static const struct option_blacklist_info four_g_w14_blacklist = { + .infolen = ARRAY_SIZE(four_g_w14_no_sendsetup), + .ifaceinfo = four_g_w14_no_sendsetup, + .reason = OPTION_BLACKLIST_SENDSETUP +}; + static const struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -659,7 +666,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) }, { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) }, { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) }, - { USB_DEVICE(FOUR_G_SYSTEMS_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14) }, + { USB_DEVICE(FOUR_G_SYSTEMS_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14), + .driver_info = (kernel_ulong_t)&four_g_w14_blacklist + }, { USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) }, { } /* Terminating entry */ }; -- cgit v0.10.2 From 08add0c780b9f5c35de49d83abb7a4e14a9cd457 Mon Sep 17 00:00:00 2001 From: Thiago Farina Date: Mon, 11 Jan 2010 20:45:26 -0500 Subject: USB: atm: Use FIELD_SIZEOF, trivial cleanup. Signed-off-by: Thiago Farina Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c index 4038043..9b53e8d 100644 --- a/drivers/usb/atm/usbatm.c +++ b/drivers/usb/atm/usbatm.c @@ -1349,7 +1349,7 @@ static int __init usbatm_usb_init(void) { dbg("%s: driver version %s", __func__, DRIVER_VERSION); - if (sizeof(struct usbatm_control) > sizeof(((struct sk_buff *) 0)->cb)) { + if (sizeof(struct usbatm_control) > FIELD_SIZEOF(struct sk_buff, cb)) { printk(KERN_ERR "%s unusable with this kernel!\n", usbatm_driver_name); return -EIO; } -- cgit v0.10.2 From 554f76962d3a6eb5110415f1591aca83f96a84ae Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 13 Jan 2010 15:30:47 +0100 Subject: USB: Remove BKL from poll() Replace BKL with usbfs_mutex to protect a global counter and a per file data structure Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index 355dffc..175529f 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -118,6 +118,7 @@ static const char *format_endpt = */ static DECLARE_WAIT_QUEUE_HEAD(deviceconndiscwq); +/* guarded by usbfs_mutex */ static unsigned int conndiscevcnt; /* this struct stores the poll state for /devices pollers */ @@ -156,7 +157,9 @@ static const struct class_info clas_info[] = void usbfs_conn_disc_event(void) { + mutex_lock(&usbfs_mutex); conndiscevcnt++; + mutex_unlock(&usbfs_mutex); wake_up(&deviceconndiscwq); } @@ -629,42 +632,29 @@ static ssize_t usb_device_read(struct file *file, char __user *buf, static unsigned int usb_device_poll(struct file *file, struct poll_table_struct *wait) { - struct usb_device_status *st = file->private_data; + struct usb_device_status *st; unsigned int mask = 0; - lock_kernel(); + mutex_lock(&usbfs_mutex); + st = file->private_data; if (!st) { st = kmalloc(sizeof(struct usb_device_status), GFP_KERNEL); - - /* we may have dropped BKL - - * need to check for having lost the race */ - if (file->private_data) { - kfree(st); - st = file->private_data; - goto lost_race; - } - /* we haven't lost - check for allocation failure now */ if (!st) { - unlock_kernel(); + mutex_unlock(&usbfs_mutex); return POLLIN; } - /* - * need to prevent the module from being unloaded, since - * proc_unregister does not call the release method and - * we would have a memory leak - */ st->lastev = conndiscevcnt; file->private_data = st; mask = POLLIN; } -lost_race: + if (file->f_mode & FMODE_READ) poll_wait(file, &deviceconndiscwq, wait); if (st->lastev != conndiscevcnt) mask |= POLLIN; st->lastev = conndiscevcnt; - unlock_kernel(); + mutex_unlock(&usbfs_mutex); return mask; } -- cgit v0.10.2 From 063e20eb980f281d8456c3b48f146107f5cb2338 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 13 Jan 2010 15:31:48 +0100 Subject: USB: Remove BKL from usbdev_open() Locking had long been changed making BKL redundant. Simply remove it. Signed-off-by: Oliver Neukum Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 825e0ab..6e73150 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -653,8 +653,6 @@ static int usbdev_open(struct inode *inode, struct file *file) const struct cred *cred = current_cred(); int ret; - lock_kernel(); - ret = -ENOMEM; ps = kmalloc(sizeof(struct dev_state), GFP_KERNEL); if (!ps) @@ -713,7 +711,6 @@ static int usbdev_open(struct inode *inode, struct file *file) usb_unlock_device(dev); snoop(&dev->dev, "opened by process %d: %s\n", task_pid_nr(current), current->comm); - unlock_kernel(); return ret; out_unlock_device: @@ -721,7 +718,6 @@ static int usbdev_open(struct inode *inode, struct file *file) usb_put_dev(dev); out_free_ps: kfree(ps); - unlock_kernel(); return ret; } -- cgit v0.10.2 From f9de332ebf9df71892d52f7eb64af101a647349f Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 13 Jan 2010 15:32:21 +0100 Subject: USB: Remove BKL from lseek implementations Replace it by mutex_lock(&file->f_dentry->d_inode->i_mutex); following the example of the generic method Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index 175529f..c83c975 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -675,7 +675,7 @@ static loff_t usb_device_lseek(struct file *file, loff_t offset, int orig) { loff_t ret; - lock_kernel(); + mutex_lock(&file->f_dentry->d_inode->i_mutex); switch (orig) { case 0: @@ -691,7 +691,7 @@ static loff_t usb_device_lseek(struct file *file, loff_t offset, int orig) ret = -EINVAL; } - unlock_kernel(); + mutex_unlock(&file->f_dentry->d_inode->i_mutex); return ret; } diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 6e73150..300f65f 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -122,7 +122,7 @@ static loff_t usbdev_lseek(struct file *file, loff_t offset, int orig) { loff_t ret; - lock_kernel(); + mutex_lock(&file->f_dentry->d_inode->i_mutex); switch (orig) { case 0: @@ -138,7 +138,7 @@ static loff_t usbdev_lseek(struct file *file, loff_t offset, int orig) ret = -EINVAL; } - unlock_kernel(); + mutex_unlock(&file->f_dentry->d_inode->i_mutex); return ret; } -- cgit v0.10.2 From 86266452f80545285c14e20a8024f79c4fb88a86 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 13 Jan 2010 15:33:15 +0100 Subject: USB: Push BKL on open down into the drivers Straightforward push into the drivers to allow auditing individual drivers separately Signed-off-by: Oliver Neukum Acked-by: Mauro Carvalho Chehab Cc: Jiri Kosina Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index 867e084..433602a 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -265,9 +265,10 @@ static int hiddev_release(struct inode * inode, struct file * file) static int hiddev_open(struct inode *inode, struct file *file) { struct hiddev_list *list; - int res; + int res, i; - int i = iminor(inode) - HIDDEV_MINOR_BASE; + lock_kernel(); + i = iminor(inode) - HIDDEV_MINOR_BASE; if (i >= HIDDEV_MINORS || i < 0 || !hiddev_table[i]) return -ENODEV; @@ -313,10 +314,12 @@ static int hiddev_open(struct inode *inode, struct file *file) usbhid_open(hid); } + unlock_kernel(); return 0; bail: file->private_data = NULL; kfree(list); + unlock_kernel(); return res; } diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c index 9b413a3..0f50508 100644 --- a/drivers/media/video/dabusb.c +++ b/drivers/media/video/dabusb.c @@ -616,10 +616,12 @@ static int dabusb_open (struct inode *inode, struct file *file) { int devnum = iminor(inode); pdabusb_t s; + int r; if (devnum < DABUSB_MINOR || devnum >= (DABUSB_MINOR + NRDABUSB)) return -EIO; + lock_kernel(); s = &dabusb[devnum - DABUSB_MINOR]; dbg("dabusb_open"); @@ -634,6 +636,7 @@ static int dabusb_open (struct inode *inode, struct file *file) msleep_interruptible(500); if (signal_pending (current)) { + unlock_kernel(); return -EAGAIN; } mutex_lock(&s->mutex); @@ -641,6 +644,7 @@ static int dabusb_open (struct inode *inode, struct file *file) if (usb_set_interface (s->usbdev, _DABUSB_IF, 1) < 0) { mutex_unlock(&s->mutex); dev_err(&s->usbdev->dev, "set_interface failed\n"); + unlock_kernel(); return -EINVAL; } s->opened = 1; @@ -649,7 +653,9 @@ static int dabusb_open (struct inode *inode, struct file *file) file->f_pos = 0; file->private_data = s; - return nonseekable_open(inode, file); + r = nonseekable_open(inode, file); + unlock_kernel(); + return r; } static int dabusb_release (struct inode *inode, struct file *file) diff --git a/drivers/staging/frontier/alphatrack.c b/drivers/staging/frontier/alphatrack.c index 15aed87..e2f82f0 100644 --- a/drivers/staging/frontier/alphatrack.c +++ b/drivers/staging/frontier/alphatrack.c @@ -41,6 +41,7 @@ #include #include +#include #include #include #include @@ -325,6 +326,7 @@ static int usb_alphatrack_open(struct inode *inode, struct file *file) int retval = 0; struct usb_interface *interface; + lock_kernel(); nonseekable_open(inode, file); subminor = iminor(inode); @@ -394,6 +396,7 @@ unlock_exit: unlock_disconnect_exit: mutex_unlock(&disconnect_mutex); + unlock_kernel(); return retval; } diff --git a/drivers/staging/frontier/tranzport.c b/drivers/staging/frontier/tranzport.c index ef8fcc8..1d3f7dc 100644 --- a/drivers/staging/frontier/tranzport.c +++ b/drivers/staging/frontier/tranzport.c @@ -40,6 +40,7 @@ #include #include +#include #include #include #include @@ -343,6 +344,7 @@ static int usb_tranzport_open(struct inode *inode, struct file *file) int retval = 0; struct usb_interface *interface; + lock_kernel(); nonseekable_open(inode, file); subminor = iminor(inode); @@ -413,6 +415,7 @@ unlock_exit: unlock_disconnect_exit: mutex_unlock(&disconnect_mutex); + unlock_kernel(); return retval; } diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 18aafcb..b75a3d8 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -516,6 +517,7 @@ static int wdm_open(struct inode *inode, struct file *file) struct usb_interface *intf; struct wdm_device *desc; + lock_kernel(); mutex_lock(&wdm_mutex); intf = usb_find_interface(&wdm_driver, minor); if (!intf) @@ -548,6 +550,7 @@ static int wdm_open(struct inode *inode, struct file *file) usb_autopm_put_interface(desc->intf); out: mutex_unlock(&wdm_mutex); + unlock_kernel(); return rv; } diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 93b5f85..d53f949 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -56,6 +56,7 @@ #include #include #include +#include #undef DEBUG #include @@ -395,6 +396,7 @@ static int usblp_open(struct inode *inode, struct file *file) if (minor < 0) return -ENODEV; + lock_kernel(); mutex_lock (&usblp_mutex); retval = -ENODEV; @@ -434,6 +436,7 @@ static int usblp_open(struct inode *inode, struct file *file) } out: mutex_unlock (&usblp_mutex); + unlock_kernel(); return retval; } diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 8588c09..426bfc7 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include @@ -113,6 +114,7 @@ static int usbtmc_open(struct inode *inode, struct file *filp) struct usbtmc_device_data *data; int retval = 0; + lock_kernel(); intf = usb_find_interface(&usbtmc_driver, iminor(inode)); if (!intf) { printk(KERN_ERR KBUILD_MODNAME @@ -128,6 +130,7 @@ static int usbtmc_open(struct inode *inode, struct file *filp) filp->private_data = data; exit: + unlock_kernel(); return retval; } diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c index bfc6c2e..c3536f1 100644 --- a/drivers/usb/core/file.c +++ b/drivers/usb/core/file.c @@ -34,7 +34,6 @@ static int usb_open(struct inode * inode, struct file * file) int err = -ENODEV; const struct file_operations *old_fops, *new_fops = NULL; - lock_kernel(); down_read(&minor_rwsem); c = usb_minors[minor]; @@ -53,7 +52,6 @@ static int usb_open(struct inode * inode, struct file * file) fops_put(old_fops); done: up_read(&minor_rwsem); - unlock_kernel(); return err; } diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c index e192e8f..dce4f7b 100644 --- a/drivers/usb/image/mdc800.c +++ b/drivers/usb/image/mdc800.c @@ -96,6 +96,7 @@ #include #include #include +#include #include #include @@ -622,6 +623,7 @@ static int mdc800_device_open (struct inode* inode, struct file *file) int retval=0; int errn=0; + lock_kernel(); mutex_lock(&mdc800->io_lock); if (mdc800->state == NOT_CONNECTED) @@ -660,6 +662,7 @@ static int mdc800_device_open (struct inode* inode, struct file *file) error_out: mutex_unlock(&mdc800->io_lock); + unlock_kernel(); return errn; } diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c index 306e978..ac8ad91 100644 --- a/drivers/usb/misc/adutux.c +++ b/drivers/usb/misc/adutux.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #ifdef CONFIG_USB_DEBUG @@ -274,6 +275,7 @@ static int adu_open(struct inode *inode, struct file *file) dbg(2,"%s : enter", __func__); + lock_kernel(); subminor = iminor(inode); if ((retval = mutex_lock_interruptible(&adutux_mutex))) { @@ -332,6 +334,7 @@ static int adu_open(struct inode *inode, struct file *file) exit_no_device: mutex_unlock(&adutux_mutex); exit_no_lock: + unlock_kernel(); dbg(2,"%s : leave, return value %d ", __func__, retval); return retval; } diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index f21bf51..32c47fb 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -45,6 +45,7 @@ #include #include #include +#include #include #include #include @@ -623,22 +624,30 @@ static void ftdi_elan_status_work(struct work_struct *work) */ static int ftdi_elan_open(struct inode *inode, struct file *file) { - int subminor = iminor(inode); - struct usb_interface *interface = usb_find_interface(&ftdi_elan_driver, - subminor); + int subminor; + struct usb_interface *interface; + + lock_kernel(); + subminor = iminor(inode); + interface = usb_find_interface(&ftdi_elan_driver, subminor); + if (!interface) { + unlock_kernel(); printk(KERN_ERR "can't find device for minor %d\n", subminor); return -ENODEV; } else { struct usb_ftdi *ftdi = usb_get_intfdata(interface); if (!ftdi) { + unlock_kernel(); return -ENODEV; } else { if (down_interruptible(&ftdi->sw_lock)) { + unlock_kernel(); return -EINTR; } else { ftdi_elan_get_kref(ftdi); file->private_data = ftdi; + unlock_kernel(); return 0; } } diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c index a54c3cb..68df9ac 100644 --- a/drivers/usb/misc/idmouse.c +++ b/drivers/usb/misc/idmouse.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include @@ -226,16 +227,20 @@ static int idmouse_open(struct inode *inode, struct file *file) struct usb_interface *interface; int result; + lock_kernel(); /* get the interface from minor number and driver information */ interface = usb_find_interface (&idmouse_driver, iminor (inode)); - if (!interface) + if (!interface) { + unlock_kernel(); return -ENODEV; + } mutex_lock(&open_disc_mutex); /* get the device information block from the interface */ dev = usb_get_intfdata(interface); if (!dev) { mutex_unlock(&open_disc_mutex); + unlock_kernel(); return -ENODEV; } @@ -272,6 +277,7 @@ error: /* unlock this device */ mutex_unlock(&dev->lock); + unlock_kernel(); return result; } diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c index 5206423..d3c8523 100644 --- a/drivers/usb/misc/iowarrior.c +++ b/drivers/usb/misc/iowarrior.c @@ -602,10 +602,12 @@ static int iowarrior_open(struct inode *inode, struct file *file) dbg("%s", __func__); + lock_kernel(); subminor = iminor(inode); interface = usb_find_interface(&iowarrior_driver, subminor); if (!interface) { + unlock_kernel(); err("%s - error, can't find device for minor %d", __func__, subminor); return -ENODEV; @@ -615,6 +617,7 @@ static int iowarrior_open(struct inode *inode, struct file *file) dev = usb_get_intfdata(interface); if (!dev) { mutex_unlock(&iowarrior_open_disc_lock); + unlock_kernel(); return -ENODEV; } @@ -641,6 +644,7 @@ static int iowarrior_open(struct inode *inode, struct file *file) out: mutex_unlock(&dev->mutex); + unlock_kernel(); return retval; } diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c index 7c0bd13..8de32df 100644 --- a/drivers/usb/misc/ldusb.c +++ b/drivers/usb/misc/ldusb.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include @@ -296,12 +297,14 @@ static int ld_usb_open(struct inode *inode, struct file *file) int retval; struct usb_interface *interface; + lock_kernel(); nonseekable_open(inode, file); subminor = iminor(inode); interface = usb_find_interface(&ld_usb_driver, subminor); if (!interface) { + unlock_kernel(); err("%s - error, can't find device for minor %d\n", __func__, subminor); return -ENODEV; @@ -309,12 +312,16 @@ static int ld_usb_open(struct inode *inode, struct file *file) dev = usb_get_intfdata(interface); - if (!dev) + if (!dev) { + unlock_kernel(); return -ENODEV; + } /* lock this device */ - if (mutex_lock_interruptible(&dev->mutex)) + if (mutex_lock_interruptible(&dev->mutex)) { + unlock_kernel(); return -ERESTARTSYS; + } /* allow opening only once */ if (dev->open_count) { @@ -353,6 +360,7 @@ static int ld_usb_open(struct inode *inode, struct file *file) unlock_exit: mutex_unlock(&dev->mutex); + unlock_kernel(); return retval; } diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index 3d4378f..94e1b84 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -82,6 +82,7 @@ #include #include #include +#include #include #include #include @@ -345,6 +346,7 @@ static int tower_open (struct inode *inode, struct file *file) dbg(2, "%s: enter", __func__); + lock_kernel(); nonseekable_open(inode, file); subminor = iminor(inode); @@ -430,6 +432,7 @@ unlock_exit: mutex_unlock(&dev->lock); exit: + unlock_kernel(); dbg(2, "%s: leave, return value %d ", __func__, retval); return retval; diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c index 17e4eec..47ce46b 100644 --- a/drivers/usb/misc/rio500.c +++ b/drivers/usb/misc/rio500.c @@ -77,7 +77,7 @@ static struct rio_usb_data rio_instance; static int open_rio(struct inode *inode, struct file *file) { struct rio_usb_data *rio = &rio_instance; - + lock_kernel(); mutex_lock(&(rio->lock)); if (rio->isopen || !rio->present) { @@ -91,6 +91,7 @@ static int open_rio(struct inode *inode, struct file *file) mutex_unlock(&(rio->lock)); dev_info(&rio->rio_dev->dev, "Rio opened.\n"); + unlock_kernel(); return 0; } diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index bb0b315..3991655 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -2416,21 +2416,28 @@ sisusb_open(struct inode *inode, struct file *file) struct usb_interface *interface; int subminor = iminor(inode); - if (!(interface = usb_find_interface(&sisusb_driver, subminor))) + lock_kernel(); + if (!(interface = usb_find_interface(&sisusb_driver, subminor))) { + unlock_kernel(); return -ENODEV; + } - if (!(sisusb = usb_get_intfdata(interface))) + if (!(sisusb = usb_get_intfdata(interface))) { + unlock_kernel(); return -ENODEV; + } mutex_lock(&sisusb->lock); if (!sisusb->present || !sisusb->ready) { mutex_unlock(&sisusb->lock); + unlock_kernel(); return -ENODEV; } if (sisusb->isopen) { mutex_unlock(&sisusb->lock); + unlock_kernel(); return -EBUSY; } @@ -2439,11 +2446,13 @@ sisusb_open(struct inode *inode, struct file *file) if (sisusb_init_gfxdevice(sisusb, 0)) { mutex_unlock(&sisusb->lock); dev_err(&sisusb->sisusb_dev->dev, "Failed to initialize device\n"); + unlock_kernel(); return -EIO; } } else { mutex_unlock(&sisusb->lock); dev_err(&sisusb->sisusb_dev->dev, "Device not attached to USB 2.0 hub\n"); + unlock_kernel(); return -EIO; } } @@ -2456,6 +2465,7 @@ sisusb_open(struct inode *inode, struct file *file) file->private_data = sisusb; mutex_unlock(&sisusb->lock); + unlock_kernel(); return 0; } diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c index 499d750..90aede9 100644 --- a/drivers/usb/misc/usblcd.c +++ b/drivers/usb/misc/usblcd.c @@ -74,10 +74,12 @@ static int lcd_open(struct inode *inode, struct file *file) struct usb_interface *interface; int subminor, r; + lock_kernel(); subminor = iminor(inode); interface = usb_find_interface(&lcd_driver, subminor); if (!interface) { + unlock_kernel(); err ("USBLCD: %s - error, can't find device for minor %d", __func__, subminor); return -ENODEV; @@ -87,6 +89,7 @@ static int lcd_open(struct inode *inode, struct file *file) dev = usb_get_intfdata(interface); if (!dev) { mutex_unlock(&open_disc_mutex); + unlock_kernel(); return -ENODEV; } @@ -98,11 +101,13 @@ static int lcd_open(struct inode *inode, struct file *file) r = usb_autopm_get_interface(interface); if (r < 0) { kref_put(&dev->kref, lcd_delete); + unlock_kernel(); return r; } /* save our object in the file's private structure */ file->private_data = dev; + unlock_kernel(); return 0; } diff --git a/drivers/usb/misc/vstusb.c b/drivers/usb/misc/vstusb.c index 874c81b..b787b25 100644 --- a/drivers/usb/misc/vstusb.c +++ b/drivers/usb/misc/vstusb.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -103,19 +104,23 @@ static int vstusb_open(struct inode *inode, struct file *file) struct vstusb_device *vstdev; struct usb_interface *interface; + lock_kernel(); interface = usb_find_interface(&vstusb_driver, iminor(inode)); if (!interface) { printk(KERN_ERR KBUILD_MODNAME ": %s - error, can't find device for minor %d\n", __func__, iminor(inode)); + unlock_kernel(); return -ENODEV; } vstdev = usb_get_intfdata(interface); - if (!vstdev) + if (!vstdev) { + unlock_kernel(); return -ENODEV; + } /* lock this device */ mutex_lock(&vstdev->lock); @@ -123,6 +128,7 @@ static int vstusb_open(struct inode *inode, struct file *file) /* can only open one time */ if ((!vstdev->present) || (vstdev->isopen)) { mutex_unlock(&vstdev->lock); + unlock_kernel(); return -EBUSY; } @@ -137,6 +143,7 @@ static int vstusb_open(struct inode *inode, struct file *file) dev_dbg(&vstdev->usb_dev->dev, "%s: opened\n", __func__); mutex_unlock(&vstdev->lock); + unlock_kernel(); return 0; } diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index 6152278..e94176b 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -90,6 +91,7 @@ static int skel_open(struct inode *inode, struct file *file) int subminor; int retval = 0; + lock_kernel(); subminor = iminor(inode); interface = usb_find_interface(&skel_driver, subminor); @@ -135,6 +137,7 @@ static int skel_open(struct inode *inode, struct file *file) mutex_unlock(&dev->io_mutex); exit: + unlock_kernel(); return retval; } -- cgit v0.10.2 From 01412a219cae5f75ced3aacf1cb56cbe386af9ce Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 13 Jan 2010 15:33:43 +0100 Subject: USB: Reduce scope of BKL in usb ioctl handling This pushes BKL down in ioctl handling and drops it for some important ioctls Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 300f65f..efe82c9 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1719,9 +1719,12 @@ static long usbdev_do_ioctl(struct file *file, unsigned int cmd, if (!(file->f_mode & FMODE_WRITE)) return -EPERM; + + lock_kernel(); usb_lock_device(dev); if (!connected(ps)) { usb_unlock_device(dev); + unlock_kernel(); return -ENODEV; } @@ -1780,10 +1783,12 @@ static long usbdev_do_ioctl(struct file *file, unsigned int cmd, break; case USBDEVFS_SUBMITURB: + unlock_kernel(); snoop(&dev->dev, "%s: SUBMITURB\n", __func__); ret = proc_submiturb(ps, p); if (ret >= 0) inode->i_mtime = CURRENT_TIME; + lock_kernel(); break; #ifdef CONFIG_COMPAT @@ -1835,13 +1840,17 @@ static long usbdev_do_ioctl(struct file *file, unsigned int cmd, break; case USBDEVFS_REAPURB: + unlock_kernel(); snoop(&dev->dev, "%s: REAPURB\n", __func__); ret = proc_reapurb(ps, p); + lock_kernel(); break; case USBDEVFS_REAPURBNDELAY: + unlock_kernel(); snoop(&dev->dev, "%s: REAPURBNDELAY\n", __func__); ret = proc_reapurbnonblock(ps, p); + lock_kernel(); break; case USBDEVFS_DISCSIGNAL: @@ -1875,6 +1884,7 @@ static long usbdev_do_ioctl(struct file *file, unsigned int cmd, break; } usb_unlock_device(dev); + unlock_kernel(); if (ret >= 0) inode->i_atime = CURRENT_TIME; return ret; @@ -1885,9 +1895,7 @@ static long usbdev_ioctl(struct file *file, unsigned int cmd, { int ret; - lock_kernel(); ret = usbdev_do_ioctl(file, cmd, (void __user *)arg); - unlock_kernel(); return ret; } @@ -1898,9 +1906,7 @@ static long usbdev_compat_ioctl(struct file *file, unsigned int cmd, { int ret; - lock_kernel(); ret = usbdev_do_ioctl(file, cmd, compat_ptr(arg)); - unlock_kernel(); return ret; } -- cgit v0.10.2 From 4e0961d53020b0fed83168d469ce44e1b3f25898 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 13 Jan 2010 23:39:43 +0000 Subject: USB: isight-firmware: declare MODULE_FIRMWARE Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/isight_firmware.c b/drivers/usb/misc/isight_firmware.c index 0316c01..06e990a 100644 --- a/drivers/usb/misc/isight_firmware.c +++ b/drivers/usb/misc/isight_firmware.c @@ -112,6 +112,8 @@ out: return ret; } +MODULE_FIRMWARE("isight.fw"); + static void isight_firmware_disconnect(struct usb_interface *intf) { } -- cgit v0.10.2 From c8b492a86d71d43fb32e29282e6405663177b9e4 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 14 Jan 2010 16:07:37 +0100 Subject: usb: BKL removal: usblp BKL was not needed at all. Removed without replacement. Signed-off-by: Oliver Neukum Acked-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index d53f949..93b5f85 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -56,7 +56,6 @@ #include #include #include -#include #undef DEBUG #include @@ -396,7 +395,6 @@ static int usblp_open(struct inode *inode, struct file *file) if (minor < 0) return -ENODEV; - lock_kernel(); mutex_lock (&usblp_mutex); retval = -ENODEV; @@ -436,7 +434,6 @@ static int usblp_open(struct inode *inode, struct file *file) } out: mutex_unlock (&usblp_mutex); - unlock_kernel(); return retval; } -- cgit v0.10.2 From b92a97efe00cf4e3555585f40dbe96512bba8f95 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 14 Jan 2010 16:08:13 +0100 Subject: USB: BKL removal: usb-skeleton BKL not needed at all. Removed without replacement. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index e94176b..6152278 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include #include @@ -91,7 +90,6 @@ static int skel_open(struct inode *inode, struct file *file) int subminor; int retval = 0; - lock_kernel(); subminor = iminor(inode); interface = usb_find_interface(&skel_driver, subminor); @@ -137,7 +135,6 @@ static int skel_open(struct inode *inode, struct file *file) mutex_unlock(&dev->io_mutex); exit: - unlock_kernel(); return retval; } -- cgit v0.10.2 From 0022457a5469d328219dfb1ea5bd89d076e28372 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 14 Jan 2010 16:08:42 +0100 Subject: USB: BKL removal: usbtmc BKL not needed at all. Removed without replacement. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 426bfc7..8588c09 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include @@ -114,7 +113,6 @@ static int usbtmc_open(struct inode *inode, struct file *filp) struct usbtmc_device_data *data; int retval = 0; - lock_kernel(); intf = usb_find_interface(&usbtmc_driver, iminor(inode)); if (!intf) { printk(KERN_ERR KBUILD_MODNAME @@ -130,7 +128,6 @@ static int usbtmc_open(struct inode *inode, struct file *filp) filp->private_data = data; exit: - unlock_kernel(); return retval; } -- cgit v0.10.2 From 94015f6e6ba11040f75f4b42aada8de23965290e Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 14 Jan 2010 16:09:26 +0100 Subject: USB: BKL removal: cdc-wdm BKL not needed at all. Removed without replacement. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index b75a3d8..18aafcb 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include @@ -517,7 +516,6 @@ static int wdm_open(struct inode *inode, struct file *file) struct usb_interface *intf; struct wdm_device *desc; - lock_kernel(); mutex_lock(&wdm_mutex); intf = usb_find_interface(&wdm_driver, minor); if (!intf) @@ -550,7 +548,6 @@ static int wdm_open(struct inode *inode, struct file *file) usb_autopm_put_interface(desc->intf); out: mutex_unlock(&wdm_mutex); - unlock_kernel(); return rv; } -- cgit v0.10.2 From 5a207b431174ecc8f995230d19c79242160b8888 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 14 Jan 2010 16:10:05 +0100 Subject: USB: BKL removal: mdc800 BKL not needed at all. Removed without replacement. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c index dce4f7b..e192e8f 100644 --- a/drivers/usb/image/mdc800.c +++ b/drivers/usb/image/mdc800.c @@ -96,7 +96,6 @@ #include #include #include -#include #include #include @@ -623,7 +622,6 @@ static int mdc800_device_open (struct inode* inode, struct file *file) int retval=0; int errn=0; - lock_kernel(); mutex_lock(&mdc800->io_lock); if (mdc800->state == NOT_CONNECTED) @@ -662,7 +660,6 @@ static int mdc800_device_open (struct inode* inode, struct file *file) error_out: mutex_unlock(&mdc800->io_lock); - unlock_kernel(); return errn; } -- cgit v0.10.2 From 511e2d0218d04f544065eb277ad475bf14881efe Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 14 Jan 2010 16:10:38 +0100 Subject: USB: BKL removal: rio500 This driver had used BKL to guard against disconnect but was incorrectly converted leaving an SMP race. BKL was added to disconnect() to fix this race BKL was removed from ioctl() as the mutex is sufficient on its own. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c index 47ce46b..a85771b 100644 --- a/drivers/usb/misc/rio500.c +++ b/drivers/usb/misc/rio500.c @@ -77,11 +77,14 @@ static struct rio_usb_data rio_instance; static int open_rio(struct inode *inode, struct file *file) { struct rio_usb_data *rio = &rio_instance; + + /* against disconnect() */ lock_kernel(); mutex_lock(&(rio->lock)); if (rio->isopen || !rio->present) { mutex_unlock(&(rio->lock)); + unlock_kernel(); return -EBUSY; } rio->isopen = 1; @@ -116,7 +119,6 @@ static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg) int retries; int retval=0; - lock_kernel(); mutex_lock(&(rio->lock)); /* Sanity check to make sure rio is connected, powered, etc */ if (rio->present == 0 || rio->rio_dev == NULL) { @@ -255,7 +257,6 @@ static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg) err_out: mutex_unlock(&(rio->lock)); - unlock_kernel(); return retval; } @@ -490,6 +491,7 @@ static void disconnect_rio(struct usb_interface *intf) struct rio_usb_data *rio = usb_get_intfdata (intf); usb_set_intfdata (intf, NULL); + lock_kernel(); if (rio) { usb_deregister_dev(intf, &usb_rio_class); @@ -499,6 +501,7 @@ static void disconnect_rio(struct usb_interface *intf) /* better let it finish - the release will do whats needed */ rio->rio_dev = NULL; mutex_unlock(&(rio->lock)); + unlock_kernel(); return; } kfree(rio->ibuf); @@ -509,6 +512,7 @@ static void disconnect_rio(struct usb_interface *intf) rio->present = 0; mutex_unlock(&(rio->lock)); } + unlock_kernel(); } static const struct usb_device_id rio_table[] = { -- cgit v0.10.2 From dbdae3bd4af15c32e3b5eb6e608c1e2ea751b07f Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 14 Jan 2010 16:11:03 +0100 Subject: USB: BKL removal: idmouse BKL was not needed at all. Removed without replacement. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c index 68df9ac..a54c3cb 100644 --- a/drivers/usb/misc/idmouse.c +++ b/drivers/usb/misc/idmouse.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include @@ -227,20 +226,16 @@ static int idmouse_open(struct inode *inode, struct file *file) struct usb_interface *interface; int result; - lock_kernel(); /* get the interface from minor number and driver information */ interface = usb_find_interface (&idmouse_driver, iminor (inode)); - if (!interface) { - unlock_kernel(); + if (!interface) return -ENODEV; - } mutex_lock(&open_disc_mutex); /* get the device information block from the interface */ dev = usb_get_intfdata(interface); if (!dev) { mutex_unlock(&open_disc_mutex); - unlock_kernel(); return -ENODEV; } @@ -277,7 +272,6 @@ error: /* unlock this device */ mutex_unlock(&dev->lock); - unlock_kernel(); return result; } -- cgit v0.10.2 From 937f7131d7ea7762851c89a410c83e1c4b393234 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 14 Jan 2010 16:11:32 +0100 Subject: USB: BKL removal: adutux BKL was not needed at all. Removed without replacement. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c index ac8ad91..306e978 100644 --- a/drivers/usb/misc/adutux.c +++ b/drivers/usb/misc/adutux.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #ifdef CONFIG_USB_DEBUG @@ -275,7 +274,6 @@ static int adu_open(struct inode *inode, struct file *file) dbg(2,"%s : enter", __func__); - lock_kernel(); subminor = iminor(inode); if ((retval = mutex_lock_interruptible(&adutux_mutex))) { @@ -334,7 +332,6 @@ static int adu_open(struct inode *inode, struct file *file) exit_no_device: mutex_unlock(&adutux_mutex); exit_no_lock: - unlock_kernel(); dbg(2,"%s : leave, return value %d ", __func__, retval); return retval; } -- cgit v0.10.2 From 92846fbb861f64b9db21f06d6878ca02c67554dc Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 14 Jan 2010 16:12:01 +0100 Subject: USB: BKL removal: ftdi-elan BKL was not needed at all. Removed without replacement. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index 32c47fb..1edb6d3 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -45,7 +45,6 @@ #include #include #include -#include #include #include #include @@ -627,27 +626,22 @@ static int ftdi_elan_open(struct inode *inode, struct file *file) int subminor; struct usb_interface *interface; - lock_kernel(); subminor = iminor(inode); interface = usb_find_interface(&ftdi_elan_driver, subminor); if (!interface) { - unlock_kernel(); printk(KERN_ERR "can't find device for minor %d\n", subminor); return -ENODEV; } else { struct usb_ftdi *ftdi = usb_get_intfdata(interface); if (!ftdi) { - unlock_kernel(); return -ENODEV; } else { if (down_interruptible(&ftdi->sw_lock)) { - unlock_kernel(); return -EINTR; } else { ftdi_elan_get_kref(ftdi); file->private_data = ftdi; - unlock_kernel(); return 0; } } -- cgit v0.10.2 From 6248c52f6abd5783ecdd042f6107bd172168961e Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 14 Jan 2010 16:12:27 +0100 Subject: USB: BKL removal: ldusb BKL was not needed at all. Removed without replacement. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c index 8de32df..7c0bd13 100644 --- a/drivers/usb/misc/ldusb.c +++ b/drivers/usb/misc/ldusb.c @@ -33,7 +33,6 @@ #include #include #include -#include #include #include @@ -297,14 +296,12 @@ static int ld_usb_open(struct inode *inode, struct file *file) int retval; struct usb_interface *interface; - lock_kernel(); nonseekable_open(inode, file); subminor = iminor(inode); interface = usb_find_interface(&ld_usb_driver, subminor); if (!interface) { - unlock_kernel(); err("%s - error, can't find device for minor %d\n", __func__, subminor); return -ENODEV; @@ -312,16 +309,12 @@ static int ld_usb_open(struct inode *inode, struct file *file) dev = usb_get_intfdata(interface); - if (!dev) { - unlock_kernel(); + if (!dev) return -ENODEV; - } /* lock this device */ - if (mutex_lock_interruptible(&dev->mutex)) { - unlock_kernel(); + if (mutex_lock_interruptible(&dev->mutex)) return -ERESTARTSYS; - } /* allow opening only once */ if (dev->open_count) { @@ -360,7 +353,6 @@ static int ld_usb_open(struct inode *inode, struct file *file) unlock_exit: mutex_unlock(&dev->mutex); - unlock_kernel(); return retval; } -- cgit v0.10.2 From 3c02b1d79e04e86f8bd2ff56da3743c2980f3e34 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 14 Jan 2010 16:12:53 +0100 Subject: USB: BKL removal: legousbtower BKL was not needed at all. Removed without replacement. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index 94e1b84..3d4378f 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -82,7 +82,6 @@ #include #include #include -#include #include #include #include @@ -346,7 +345,6 @@ static int tower_open (struct inode *inode, struct file *file) dbg(2, "%s: enter", __func__); - lock_kernel(); nonseekable_open(inode, file); subminor = iminor(inode); @@ -432,7 +430,6 @@ unlock_exit: mutex_unlock(&dev->lock); exit: - unlock_kernel(); dbg(2, "%s: leave, return value %d ", __func__, retval); return retval; -- cgit v0.10.2 From eedf1f17d40e24ae80007bcbe7b7e997c32995c8 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 14 Jan 2010 16:13:24 +0100 Subject: USB: BKL removal: vstusb BKL was not needed at all. Removed without replacement. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/vstusb.c b/drivers/usb/misc/vstusb.c index b787b25..874c81b 100644 --- a/drivers/usb/misc/vstusb.c +++ b/drivers/usb/misc/vstusb.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #include @@ -104,23 +103,19 @@ static int vstusb_open(struct inode *inode, struct file *file) struct vstusb_device *vstdev; struct usb_interface *interface; - lock_kernel(); interface = usb_find_interface(&vstusb_driver, iminor(inode)); if (!interface) { printk(KERN_ERR KBUILD_MODNAME ": %s - error, can't find device for minor %d\n", __func__, iminor(inode)); - unlock_kernel(); return -ENODEV; } vstdev = usb_get_intfdata(interface); - if (!vstdev) { - unlock_kernel(); + if (!vstdev) return -ENODEV; - } /* lock this device */ mutex_lock(&vstdev->lock); @@ -128,7 +123,6 @@ static int vstusb_open(struct inode *inode, struct file *file) /* can only open one time */ if ((!vstdev->present) || (vstdev->isopen)) { mutex_unlock(&vstdev->lock); - unlock_kernel(); return -EBUSY; } @@ -143,7 +137,6 @@ static int vstusb_open(struct inode *inode, struct file *file) dev_dbg(&vstdev->usb_dev->dev, "%s: opened\n", __func__); mutex_unlock(&vstdev->lock); - unlock_kernel(); return 0; } -- cgit v0.10.2 From 9fd5c675864263e9f0e6bdb2d752bb380b32a01b Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 14 Jan 2010 16:13:46 +0100 Subject: USB: BKL removal: frontier BKL was not needed at all. Removed without replacement. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/frontier/alphatrack.c b/drivers/staging/frontier/alphatrack.c index e2f82f0..15aed87 100644 --- a/drivers/staging/frontier/alphatrack.c +++ b/drivers/staging/frontier/alphatrack.c @@ -41,7 +41,6 @@ #include #include -#include #include #include #include @@ -326,7 +325,6 @@ static int usb_alphatrack_open(struct inode *inode, struct file *file) int retval = 0; struct usb_interface *interface; - lock_kernel(); nonseekable_open(inode, file); subminor = iminor(inode); @@ -396,7 +394,6 @@ unlock_exit: unlock_disconnect_exit: mutex_unlock(&disconnect_mutex); - unlock_kernel(); return retval; } diff --git a/drivers/staging/frontier/tranzport.c b/drivers/staging/frontier/tranzport.c index 1d3f7dc..ef8fcc8 100644 --- a/drivers/staging/frontier/tranzport.c +++ b/drivers/staging/frontier/tranzport.c @@ -40,7 +40,6 @@ #include #include -#include #include #include #include @@ -344,7 +343,6 @@ static int usb_tranzport_open(struct inode *inode, struct file *file) int retval = 0; struct usb_interface *interface; - lock_kernel(); nonseekable_open(inode, file); subminor = iminor(inode); @@ -415,7 +413,6 @@ unlock_exit: unlock_disconnect_exit: mutex_unlock(&disconnect_mutex); - unlock_kernel(); return retval; } -- cgit v0.10.2 From 2a9d0083f63da961a8cd4fdf9f4e8e6433c36966 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 14 Jan 2010 16:23:56 +0100 Subject: USB: BKL removal from ioctl path of usbfs Total removal from the ioctl code path except for the outcall to external modules. Locking is ensured by the normal locks of usbfs. Signed-off-by: Oliver Neukum Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index efe82c9..e59efea 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1636,7 +1636,10 @@ static int proc_ioctl(struct dev_state *ps, struct usbdevfs_ioctl *ctl) if (driver == NULL || driver->ioctl == NULL) { retval = -ENOTTY; } else { + /* keep API that guarantees BKL */ + lock_kernel(); retval = driver->ioctl(intf, ctl->ioctl_code, buf); + unlock_kernel(); if (retval == -ENOIOCTLCMD) retval = -ENOTTY; } @@ -1720,11 +1723,9 @@ static long usbdev_do_ioctl(struct file *file, unsigned int cmd, if (!(file->f_mode & FMODE_WRITE)) return -EPERM; - lock_kernel(); usb_lock_device(dev); if (!connected(ps)) { usb_unlock_device(dev); - unlock_kernel(); return -ENODEV; } @@ -1783,12 +1784,10 @@ static long usbdev_do_ioctl(struct file *file, unsigned int cmd, break; case USBDEVFS_SUBMITURB: - unlock_kernel(); snoop(&dev->dev, "%s: SUBMITURB\n", __func__); ret = proc_submiturb(ps, p); if (ret >= 0) inode->i_mtime = CURRENT_TIME; - lock_kernel(); break; #ifdef CONFIG_COMPAT @@ -1840,17 +1839,13 @@ static long usbdev_do_ioctl(struct file *file, unsigned int cmd, break; case USBDEVFS_REAPURB: - unlock_kernel(); snoop(&dev->dev, "%s: REAPURB\n", __func__); ret = proc_reapurb(ps, p); - lock_kernel(); break; case USBDEVFS_REAPURBNDELAY: - unlock_kernel(); snoop(&dev->dev, "%s: REAPURBNDELAY\n", __func__); ret = proc_reapurbnonblock(ps, p); - lock_kernel(); break; case USBDEVFS_DISCSIGNAL: @@ -1884,7 +1879,6 @@ static long usbdev_do_ioctl(struct file *file, unsigned int cmd, break; } usb_unlock_device(dev); - unlock_kernel(); if (ret >= 0) inode->i_atime = CURRENT_TIME; return ret; -- cgit v0.10.2 From a8d4211f33a9573f7b1bdcfd9c9c48631d1515ee Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 21 Jan 2010 14:54:10 -0800 Subject: USB: remove the berry_charge driver The Barry project's userspace program, bcharge, can better handle this device and functionality, and it also works with the latest phones, which this driver does not support. So remove it, as the userspace code should be used instead. Cc: Chris Frey Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index abe3aa6..ef9bbef 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -87,17 +87,6 @@ config USB_LCD To compile this driver as a module, choose M here: the module will be called usblcd. -config USB_BERRY_CHARGE - tristate "USB BlackBerry recharge support" - depends on USB - help - Say Y here if you want to connect a BlackBerry device to your - computer's USB port and have it automatically switch to "recharge" - mode. - - To compile this driver as a module, choose M here: the - module will be called berry_charge. - config USB_LED tristate "USB LED driver support" depends on USB diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index 0826aab..36dd40d 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -5,7 +5,6 @@ obj-$(CONFIG_USB_ADUTUX) += adutux.o obj-$(CONFIG_USB_APPLEDISPLAY) += appledisplay.o -obj-$(CONFIG_USB_BERRY_CHARGE) += berry_charge.o obj-$(CONFIG_USB_CYPRESS_CY7C63)+= cypress_cy7c63.o obj-$(CONFIG_USB_CYTHERM) += cytherm.o obj-$(CONFIG_USB_EMI26) += emi26.o diff --git a/drivers/usb/misc/berry_charge.c b/drivers/usb/misc/berry_charge.c deleted file mode 100644 index a96e58c..0000000 --- a/drivers/usb/misc/berry_charge.c +++ /dev/null @@ -1,183 +0,0 @@ -/* - * USB BlackBerry charging module - * - * Copyright (C) 2007 Greg Kroah-Hartman - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation, version 2. - * - * Information on how to switch configs was taken by the bcharge.cc file - * created by the barry.sf.net project. - * - * bcharge.cc has the following copyright: - * Copyright (C) 2006, Net Direct Inc. (http://www.netdirect.ca/) - * and is released under the GPLv2. - * - * - */ - -#include -#include -#include -#include -#include -#include - -#define RIM_VENDOR 0x0fca -#define BLACKBERRY 0x0001 -#define BLACKBERRY_PEARL_DUAL 0x0004 -#define BLACKBERRY_PEARL 0x0006 - -static int debug; -static int pearl_dual_mode = 1; - -#ifdef dbg -#undef dbg -#endif -#define dbg(dev, format, arg...) \ - if (debug) \ - dev_printk(KERN_DEBUG , dev , format , ## arg) - -static const struct usb_device_id id_table[] = { - { USB_DEVICE(RIM_VENDOR, BLACKBERRY) }, - { USB_DEVICE(RIM_VENDOR, BLACKBERRY_PEARL) }, - { USB_DEVICE(RIM_VENDOR, BLACKBERRY_PEARL_DUAL) }, - { }, /* Terminating entry */ -}; -MODULE_DEVICE_TABLE(usb, id_table); - -static int magic_charge(struct usb_device *udev) -{ - char *dummy_buffer = kzalloc(2, GFP_KERNEL); - int retval; - - if (!dummy_buffer) - return -ENOMEM; - - /* send two magic commands and then set the configuration. The device - * will then reset itself with the new power usage and should start - * charging. */ - - /* Note, with testing, it only seems that the first message is really - * needed (at least for the 8700c), but to be safe, we emulate what - * other operating systems seem to be sending to their device. We - * really need to get some specs for this device to be sure about what - * is going on here. - */ - dbg(&udev->dev, "Sending first magic command\n"); - retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), - 0xa5, 0xc0, 0, 1, dummy_buffer, 2, 100); - if (retval != 2) { - dev_err(&udev->dev, "First magic command failed: %d.\n", - retval); - goto exit; - } - - dbg(&udev->dev, "Sending second magic command\n"); - retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), - 0xa2, 0x40, 0, 1, dummy_buffer, 0, 100); - if (retval != 0) { - dev_err(&udev->dev, "Second magic command failed: %d.\n", - retval); - goto exit; - } - - dbg(&udev->dev, "Calling set_configuration\n"); - retval = usb_driver_set_configuration(udev, 1); - if (retval) - dev_err(&udev->dev, "Set Configuration failed :%d.\n", retval); - -exit: - kfree(dummy_buffer); - return retval; -} - -static int magic_dual_mode(struct usb_device *udev) -{ - char *dummy_buffer = kzalloc(2, GFP_KERNEL); - int retval; - - if (!dummy_buffer) - return -ENOMEM; - - /* send magic command so that the Blackberry Pearl device exposes - * two interfaces: both the USB mass-storage one and one which can - * be used for database access. */ - dbg(&udev->dev, "Sending magic pearl command\n"); - retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), - 0xa9, 0xc0, 1, 1, dummy_buffer, 2, 100); - dbg(&udev->dev, "Magic pearl command returned %d\n", retval); - - dbg(&udev->dev, "Calling set_configuration\n"); - retval = usb_driver_set_configuration(udev, 1); - if (retval) - dev_err(&udev->dev, "Set Configuration failed :%d.\n", retval); - - kfree(dummy_buffer); - return retval; -} - -static int berry_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct usb_device *udev = interface_to_usbdev(intf); - - if (udev->bus_mA < 500) { - dbg(&udev->dev, "Not enough power to charge available\n"); - return -ENODEV; - } - - dbg(&udev->dev, "Power is set to %dmA\n", - udev->actconfig->desc.bMaxPower * 2); - - /* check the power usage so we don't try to enable something that is - * already enabled */ - if ((udev->actconfig->desc.bMaxPower * 2) == 500) { - dbg(&udev->dev, "device is already charging, power is " - "set to %dmA\n", udev->actconfig->desc.bMaxPower * 2); - return -ENODEV; - } - - /* turn the power on */ - magic_charge(udev); - - if ((le16_to_cpu(udev->descriptor.idProduct) == BLACKBERRY_PEARL) && - (pearl_dual_mode)) - magic_dual_mode(udev); - - /* we don't really want to bind to the device, userspace programs can - * handle the syncing just fine, so get outta here. */ - return -ENODEV; -} - -static void berry_disconnect(struct usb_interface *intf) -{ -} - -static struct usb_driver berry_driver = { - .name = "berry_charge", - .probe = berry_probe, - .disconnect = berry_disconnect, - .id_table = id_table, -}; - -static int __init berry_init(void) -{ - return usb_register(&berry_driver); -} - -static void __exit berry_exit(void) -{ - usb_deregister(&berry_driver); -} - -module_init(berry_init); -module_exit(berry_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Greg Kroah-Hartman "); -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); -module_param(pearl_dual_mode, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(pearl_dual_mode, "Change Blackberry Pearl to run in dual mode"); -- cgit v0.10.2 From aa7907407adf1358ee39be0e98beaf4c129a78d6 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Fri, 15 Jan 2010 22:13:58 -0800 Subject: USB: gadget: Add DEVTYPE support for Ethernet functions The problem with Ethernet based networking devices is to clearly identify what's their usage. Special interfaces like bridges, WiFi, Bluetooth, WiMAX or WWAN are already using DEVTYPE identification. This patch marks the Ethernet functions of gadgets from the device type "gadget". Automatic setup of these interfaces can now happen from userspace without the need of hardcoding the network interface name. Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c index 2fc02bd..84ca195 100644 --- a/drivers/usb/gadget/u_ether.c +++ b/drivers/usb/gadget/u_ether.c @@ -746,6 +746,10 @@ static const struct net_device_ops eth_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; +static struct device_type gadget_type = { + .name = "gadget", +}; + /** * gether_setup - initialize one ethernet-over-usb link * @g: gadget to associated with these links @@ -808,6 +812,7 @@ int __init gether_setup(struct usb_gadget *g, u8 ethaddr[ETH_ALEN]) dev->gadget = g; SET_NETDEV_DEV(net, &g->dev); + SET_NETDEV_DEVTYPE(net, &gadget_type); status = register_netdev(net); if (status < 0) { -- cgit v0.10.2 From a45a1e07aa5e4d3dc952c264f87184c5ac8c0a62 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 16 Jan 2010 16:59:51 +0100 Subject: USB: serial: Eliminate useless code The variables priv and portdata are initialized twice to the same (side effect-free) expressions. Drop one initialization in each case. A simplified version of the semantic match that finds this problem is: (http://coccinelle.lip6.fr/) // @forall@ idexpression *x; identifier f!=ERR_PTR; @@ x = f(...) ... when != x ( x = f(...,<+...x...+>,...) | * x = f(...) ) // Signed-off-by: Julia Lawall Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index eee8726..c349f79 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -691,7 +691,6 @@ static void cypress_dtr_rts(struct usb_serial_port *port, int on) { struct cypress_private *priv = usb_get_serial_port_data(port); /* drop dtr and rts */ - priv = usb_get_serial_port_data(port); spin_lock_irq(&priv->lock); if (on == 0) priv->line_control = 0; diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index ea27f7d..bb0d56c 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -477,7 +477,7 @@ static void sierra_outdat_callback(struct urb *urb) static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count) { - struct sierra_port_private *portdata = usb_get_serial_port_data(port); + struct sierra_port_private *portdata; struct sierra_intf_private *intfdata; struct usb_serial *serial = port->serial; unsigned long flags; -- cgit v0.10.2 From 0a2a37752e8c62f7bf160ad196c9384095d347fd Mon Sep 17 00:00:00 2001 From: Andreas Mohr Date: Sun, 17 Jan 2010 11:45:47 +0100 Subject: USB: ftdi_sio: correct spelling in header files - correct spelling/whitespace in ftdi_sio.h and ftdi_sio_ids.h Signed-off-by: Andreas Mohr Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index b0e0d64..ff9bf80 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -28,13 +28,13 @@ #define FTDI_SIO_SET_FLOW_CTRL 2 /* Set flow control register */ #define FTDI_SIO_SET_BAUD_RATE 3 /* Set baud rate */ #define FTDI_SIO_SET_DATA 4 /* Set the data characteristics of the port */ -#define FTDI_SIO_GET_MODEM_STATUS 5 /* Retrieve current value of modern status register */ +#define FTDI_SIO_GET_MODEM_STATUS 5 /* Retrieve current value of modem status register */ #define FTDI_SIO_SET_EVENT_CHAR 6 /* Set the event character */ #define FTDI_SIO_SET_ERROR_CHAR 7 /* Set the error character */ #define FTDI_SIO_SET_LATENCY_TIMER 9 /* Set the latency timer */ #define FTDI_SIO_GET_LATENCY_TIMER 10 /* Get the latency timer */ -/* Interface indicies for FT2232, FT2232H and FT4232H devices*/ +/* Interface indices for FT2232, FT2232H and FT4232H devices */ #define INTERFACE_A 1 #define INTERFACE_B 2 #define INTERFACE_C 3 @@ -270,7 +270,7 @@ typedef enum { * BmRequestType: 0100 0000b * bRequest: FTDI_SIO_SET_FLOW_CTRL * wValue: Xoff/Xon - * wIndex: Protocol/Port - hIndex is protocl / lIndex is port + * wIndex: Protocol/Port - hIndex is protocol / lIndex is port * wLength: 0 * Data: None * diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index c8951ae..f9efd97 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -22,7 +22,7 @@ #define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */ #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */ #define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */ -#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ +#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ #define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */ @@ -49,7 +49,7 @@ #define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8 #define LMI_LM3S_EVAL_BOARD_PID 0xbcd9 -#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */ +#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmbH */ /* OpenDCC (www.opendcc.de) product id */ #define FTDI_OPENDCC_PID 0xBFD8 @@ -185,7 +185,7 @@ #define FTDI_ELV_TFD128_PID 0xE0EC /* ELV Temperatur-Feuchte-Datenlogger TFD 128 */ #define FTDI_ELV_FM3RX_PID 0xE0ED /* ELV Messwertuebertragung FM3 RX */ #define FTDI_ELV_WS777_PID 0xE0EE /* Conrad WS 777 */ -#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */ +#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Energy monitor EM 1010 PC */ #define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ #define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ #define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ @@ -212,8 +212,8 @@ * drivers, or possibly the Comedi drivers in some cases. */ #define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */ #define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */ -#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */ -#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */ +#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperatur-Feuchte-Messgeraet (TFM 100) */ +#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkuhr (UDF 77) */ #define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */ /* @@ -320,7 +320,7 @@ /* * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485, - * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices + * USB-TTY aktiv, USB-TTY passiv. Some PIDs are used by several devices * and I'm not entirely sure which are used by which. */ #define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 @@ -330,10 +330,10 @@ * Linx Technologies product ids */ #define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */ -#define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */ -#define LINX_FUTURE_0_PID 0xF44A /* Linx future device */ -#define LINX_FUTURE_1_PID 0xF44B /* Linx future device */ -#define LINX_FUTURE_2_PID 0xF44C /* Linx future device */ +#define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */ +#define LINX_FUTURE_0_PID 0xF44A /* Linx future device */ +#define LINX_FUTURE_1_PID 0xF44B /* Linx future device */ +#define LINX_FUTURE_2_PID 0xF44C /* Linx future device */ /* * Oceanic product ids @@ -642,7 +642,7 @@ #define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */ #define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */ -/* Larsen and Brusgaard AltiTrack/USBtrack */ +/* Larsen and Brusgaard AltiTrack/USBtrack */ #define LARSENBRUSGAARD_VID 0x0FD8 #define LB_ALTITRACK_PID 0x0001 @@ -971,7 +971,7 @@ #define ALTI2_N3_PID 0x6001 /* Neptune 3 */ /* - * Dresden Elektronic Sensor Terminal Board + * Dresden Elektronik Sensor Terminal Board */ #define DE_VID 0x1cf1 /* Vendor ID */ #define STB_PID 0x0001 /* Sensor Terminal Board */ -- cgit v0.10.2 From 330e3c4cc7179f9f3916cd147bf289467e16b169 Mon Sep 17 00:00:00 2001 From: Andreas Mohr Date: Sun, 17 Jan 2010 11:45:57 +0100 Subject: USB: ftdi_sio: correct spelling in implementation file - correct spelling - correct non-tabbed .tiocmget/.tiocmset entries Signed-off-by: Andreas Mohr Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 37db5a0..dd5bfbc 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -812,7 +812,7 @@ static struct usb_serial_driver ftdi_sio_device = { .name = "ftdi_sio", }, .description = "FTDI USB Serial Device", - .usb_driver = &ftdi_driver , + .usb_driver = &ftdi_driver, .id_table = id_table_combined, .num_ports = 1, .probe = ftdi_sio_probe, @@ -828,8 +828,8 @@ static struct usb_serial_driver ftdi_sio_device = { .chars_in_buffer = ftdi_chars_in_buffer, .read_bulk_callback = ftdi_read_bulk_callback, .write_bulk_callback = ftdi_write_bulk_callback, - .tiocmget = ftdi_tiocmget, - .tiocmset = ftdi_tiocmset, + .tiocmget = ftdi_tiocmget, + .tiocmset = ftdi_tiocmset, .ioctl = ftdi_ioctl, .set_termios = ftdi_set_termios, .break_ctl = ftdi_break_ctl, @@ -1327,20 +1327,20 @@ static void ftdi_determine_type(struct usb_serial_port *port) __func__); } } else if (version < 0x200) { - /* Old device. Assume its the original SIO. */ + /* Old device. Assume it's the original SIO. */ priv->chip_type = SIO; priv->baud_base = 12000000 / 16; priv->write_offset = 1; } else if (version < 0x400) { - /* Assume its an FT8U232AM (or FT8U245AM) */ + /* Assume it's an FT8U232AM (or FT8U245AM) */ /* (It might be a BM because of the iSerialNumber bug, * but it will still work as an AM device.) */ priv->chip_type = FT8U232AM; } else if (version < 0x600) { - /* Assume its an FT232BM (or FT245BM) */ + /* Assume it's an FT232BM (or FT245BM) */ priv->chip_type = FT232BM; } else { - /* Assume its an FT232R */ + /* Assume it's an FT232R */ priv->chip_type = FT232RL; } dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]); -- cgit v0.10.2 From 385f690bc058ba2555640740a1957826a40e4615 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Sun, 17 Jan 2010 19:24:03 -0200 Subject: USB: trivial: missing newline in usb core warning message Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 73de41b..e5d5a26 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1316,7 +1316,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) alt = usb_altnum_to_altsetting(iface, alternate); if (!alt) { - dev_warn(&dev->dev, "selecting invalid altsetting %d", + dev_warn(&dev->dev, "selecting invalid altsetting %d\n", alternate); return -EINVAL; } -- cgit v0.10.2 From 0978f8c55cdc7c06b2f1440b030e93fda2c53b2b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 18 Jan 2010 13:18:35 +0000 Subject: USB: s3c-hsotg: Staticise non-exported functions Keeps sparse happy if nothing else. Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 5fc80a1..2a5ea06 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -317,7 +317,8 @@ static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg) * * Allocate a new USB request structure appropriate for the specified endpoint */ -struct usb_request *s3c_hsotg_ep_alloc_request(struct usb_ep *ep, gfp_t flags) +static struct usb_request *s3c_hsotg_ep_alloc_request(struct usb_ep *ep, + gfp_t flags) { struct s3c_hsotg_req *req; @@ -1460,7 +1461,7 @@ static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg) * as the actual data should be sent to the memory directly and we turn * on the completion interrupts to get notifications of transfer completion. */ -void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg) +static void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg) { u32 grxstsr = readl(hsotg->regs + S3C_GRXSTSP); u32 epnum, status, size; @@ -3094,7 +3095,7 @@ static void s3c_hsotg_gate(struct platform_device *pdev, bool on) local_irq_restore(flags); } -struct s3c_hsotg_plat s3c_hsotg_default_pdata; +static struct s3c_hsotg_plat s3c_hsotg_default_pdata; static int __devinit s3c_hsotg_probe(struct platform_device *pdev) { -- cgit v0.10.2 From 0880aef49e40abd1ed34ab713e8b024e8bc2021e Mon Sep 17 00:00:00 2001 From: Chris Frey Date: Tue, 26 Jan 2010 17:07:29 -0500 Subject: USB: usbfs_snoop: add data logging back in Uses the new snoop function from commit 4c6e8971cbe0148085, but includes the buffer data where appropriate, as before. Signed-off-by: Chris Frey Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index e59efea..e909ff7 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -310,7 +310,8 @@ static struct async *async_getpending(struct dev_state *ps, static void snoop_urb(struct usb_device *udev, void __user *userurb, int pipe, unsigned length, - int timeout_or_status, enum snoop_when when) + int timeout_or_status, enum snoop_when when, + unsigned char *data, unsigned data_len) { static const char *types[] = {"isoc", "int", "ctrl", "bulk"}; static const char *dirs[] = {"out", "in"}; @@ -344,6 +345,11 @@ static void snoop_urb(struct usb_device *udev, "status %d\n", ep, t, d, length, timeout_or_status); } + + if (data && data_len > 0) { + print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_NONE, 32, 1, + data, data_len, 1); + } } #define AS_CONTINUATION 1 @@ -410,7 +416,9 @@ static void async_completed(struct urb *urb) } snoop(&urb->dev->dev, "urb complete\n"); snoop_urb(urb->dev, as->userurb, urb->pipe, urb->actual_length, - as->status, COMPLETE); + as->status, COMPLETE, + ((urb->transfer_flags & URB_DIR_MASK) == USB_DIR_OUT) ? + NULL : urb->transfer_buffer, urb->actual_length); if (as->status < 0 && as->bulk_addr && as->status != -ECONNRESET && as->status != -ENOENT) cancel_bulk_urbs(ps, as->bulk_addr); @@ -774,6 +782,13 @@ static int proc_control(struct dev_state *ps, void __user *arg) if (!tbuf) return -ENOMEM; tmo = ctrl.timeout; + snoop(&dev->dev, "control urb: bRequestType=%02x " + "bRequest=%02x wValue=%04x " + "wIndex=%04x wLength=%04x\n", + ctrl.bRequestType, ctrl.bRequest, + __le16_to_cpup(&ctrl.wValue), + __le16_to_cpup(&ctrl.wIndex), + __le16_to_cpup(&ctrl.wLength)); if (ctrl.bRequestType & 0x80) { if (ctrl.wLength && !access_ok(VERIFY_WRITE, ctrl.data, ctrl.wLength)) { @@ -781,15 +796,15 @@ static int proc_control(struct dev_state *ps, void __user *arg) return -EINVAL; } pipe = usb_rcvctrlpipe(dev, 0); - snoop_urb(dev, NULL, pipe, ctrl.wLength, tmo, SUBMIT); + snoop_urb(dev, NULL, pipe, ctrl.wLength, tmo, SUBMIT, NULL, 0); usb_unlock_device(dev); i = usb_control_msg(dev, pipe, ctrl.bRequest, ctrl.bRequestType, ctrl.wValue, ctrl.wIndex, tbuf, ctrl.wLength, tmo); usb_lock_device(dev); - snoop_urb(dev, NULL, pipe, max(i, 0), min(i, 0), COMPLETE); - + snoop_urb(dev, NULL, pipe, max(i, 0), min(i, 0), COMPLETE, + tbuf, i); if ((i > 0) && ctrl.wLength) { if (copy_to_user(ctrl.data, tbuf, i)) { free_page((unsigned long)tbuf); @@ -804,14 +819,15 @@ static int proc_control(struct dev_state *ps, void __user *arg) } } pipe = usb_sndctrlpipe(dev, 0); - snoop_urb(dev, NULL, pipe, ctrl.wLength, tmo, SUBMIT); + snoop_urb(dev, NULL, pipe, ctrl.wLength, tmo, SUBMIT, + tbuf, ctrl.wLength); usb_unlock_device(dev); i = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), ctrl.bRequest, ctrl.bRequestType, ctrl.wValue, ctrl.wIndex, tbuf, ctrl.wLength, tmo); usb_lock_device(dev); - snoop_urb(dev, NULL, pipe, max(i, 0), min(i, 0), COMPLETE); + snoop_urb(dev, NULL, pipe, max(i, 0), min(i, 0), COMPLETE, NULL, 0); } free_page((unsigned long)tbuf); if (i < 0 && i != -EPIPE) { @@ -857,12 +873,12 @@ static int proc_bulk(struct dev_state *ps, void __user *arg) kfree(tbuf); return -EINVAL; } - snoop_urb(dev, NULL, pipe, len1, tmo, SUBMIT); + snoop_urb(dev, NULL, pipe, len1, tmo, SUBMIT, NULL, 0); usb_unlock_device(dev); i = usb_bulk_msg(dev, pipe, tbuf, len1, &len2, tmo); usb_lock_device(dev); - snoop_urb(dev, NULL, pipe, len2, i, COMPLETE); + snoop_urb(dev, NULL, pipe, len2, i, COMPLETE, tbuf, len2); if (!i && len2) { if (copy_to_user(bulk.data, tbuf, len2)) { @@ -877,12 +893,12 @@ static int proc_bulk(struct dev_state *ps, void __user *arg) return -EFAULT; } } - snoop_urb(dev, NULL, pipe, len1, tmo, SUBMIT); + snoop_urb(dev, NULL, pipe, len1, tmo, SUBMIT, tbuf, len1); usb_unlock_device(dev); i = usb_bulk_msg(dev, pipe, tbuf, len1, &len2, tmo); usb_lock_device(dev); - snoop_urb(dev, NULL, pipe, len2, i, COMPLETE); + snoop_urb(dev, NULL, pipe, len2, i, COMPLETE, NULL, 0); } kfree(tbuf); if (i < 0) @@ -1101,6 +1117,13 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, is_in = 0; uurb->endpoint &= ~USB_DIR_IN; } + snoop(&ps->dev->dev, "control urb: bRequestType=%02x " + "bRequest=%02x wValue=%04x " + "wIndex=%04x wLength=%04x\n", + dr->bRequestType, dr->bRequest, + __le16_to_cpup(&dr->wValue), + __le16_to_cpup(&dr->wIndex), + __le16_to_cpup(&dr->wLength)); break; case USBDEVFS_URB_TYPE_BULK: @@ -1244,7 +1267,9 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, } } snoop_urb(ps->dev, as->userurb, as->urb->pipe, - as->urb->transfer_buffer_length, 0, SUBMIT); + as->urb->transfer_buffer_length, 0, SUBMIT, + is_in ? NULL : as->urb->transfer_buffer, + uurb->buffer_length); async_newpending(as); if (usb_endpoint_xfer_bulk(&ep->desc)) { @@ -1282,7 +1307,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, dev_printk(KERN_DEBUG, &ps->dev->dev, "usbfs: usb_submit_urb returned %d\n", ret); snoop_urb(ps->dev, as->userurb, as->urb->pipe, - 0, ret, COMPLETE); + 0, ret, COMPLETE, NULL, 0); async_removepending(as); free_async(as); return ret; -- cgit v0.10.2 From 8af6096caf8b3fb7ee33e636c44a29f373d27df5 Mon Sep 17 00:00:00 2001 From: Christoph Egger Date: Thu, 21 Jan 2010 14:58:47 +0100 Subject: USB: remove obsolete config in kernel source (USB_HCD_DMA) The configuration Option USB_HCD_DMA is not reachable in KConfig so this piece of Code is effectively dead and useless. Remove it to avoid confusion. Signed-off-by: Christoph Egger Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 5596fc1..217fb51 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -2719,24 +2719,11 @@ static int __init isp1362_probe(struct platform_device *pdev) } irq = irq_res->start; -#ifdef CONFIG_USB_HCD_DMA - if (pdev->dev.dma_mask) { - struct resource *dma_res = platform_get_resource(pdev, IORESOURCE_MEM, 2); - - if (!dma_res) { - retval = -ENODEV; - goto err1; - } - isp1362_hcd->data_dma = dma_res->start; - isp1362_hcd->max_dma_size = resource_len(dma_res); - } -#else if (pdev->dev.dma_mask) { DBG(1, "won't do DMA"); retval = -ENODEV; goto err1; } -#endif if (!request_mem_region(addr->start, resource_len(addr), hcd_name)) { retval = -EBUSY; -- cgit v0.10.2 From 4f712e010b2da1cc01c178922f2eb5aaeae461b6 Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Thu, 21 Jan 2010 15:33:52 +0200 Subject: usb: musb: Add context save and restore support Adding support for MUSB register save and restore during system suspend and resume. Changes: - Added musb_save/restore_context() functions - Added platform specific musb_platform_save/restore_context() to handle platform specific jobs. - Maintaining BlackFin compatibility by adding read/write functions for registers which are not available in BlackFin Tested system suspend and resume on OMAP3EVM board. Signed-off-by: Anand Gadiyar Signed-off-by: Ajay Kumar Gupta Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 074d380..2c53da7 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2167,6 +2167,148 @@ static int __exit musb_remove(struct platform_device *pdev) #ifdef CONFIG_PM +static struct musb_context_registers musb_context; + +void musb_save_context(struct musb *musb) +{ + int i; + void __iomem *musb_base = musb->mregs; + + if (is_host_enabled(musb)) { + musb_context.frame = musb_readw(musb_base, MUSB_FRAME); + musb_context.testmode = musb_readb(musb_base, MUSB_TESTMODE); + } + musb_context.power = musb_readb(musb_base, MUSB_POWER); + musb_context.intrtxe = musb_readw(musb_base, MUSB_INTRTXE); + musb_context.intrrxe = musb_readw(musb_base, MUSB_INTRRXE); + musb_context.intrusbe = musb_readb(musb_base, MUSB_INTRUSBE); + musb_context.index = musb_readb(musb_base, MUSB_INDEX); + musb_context.devctl = musb_readb(musb_base, MUSB_DEVCTL); + + for (i = 0; i < MUSB_C_NUM_EPS; ++i) { + musb_writeb(musb_base, MUSB_INDEX, i); + musb_context.index_regs[i].txmaxp = + musb_readw(musb_base, 0x10 + MUSB_TXMAXP); + musb_context.index_regs[i].txcsr = + musb_readw(musb_base, 0x10 + MUSB_TXCSR); + musb_context.index_regs[i].rxmaxp = + musb_readw(musb_base, 0x10 + MUSB_RXMAXP); + musb_context.index_regs[i].rxcsr = + musb_readw(musb_base, 0x10 + MUSB_RXCSR); + + if (musb->dyn_fifo) { + musb_context.index_regs[i].txfifoadd = + musb_read_txfifoadd(musb_base); + musb_context.index_regs[i].rxfifoadd = + musb_read_rxfifoadd(musb_base); + musb_context.index_regs[i].txfifosz = + musb_read_txfifosz(musb_base); + musb_context.index_regs[i].rxfifosz = + musb_read_rxfifosz(musb_base); + } + if (is_host_enabled(musb)) { + musb_context.index_regs[i].txtype = + musb_readb(musb_base, 0x10 + MUSB_TXTYPE); + musb_context.index_regs[i].txinterval = + musb_readb(musb_base, 0x10 + MUSB_TXINTERVAL); + musb_context.index_regs[i].rxtype = + musb_readb(musb_base, 0x10 + MUSB_RXTYPE); + musb_context.index_regs[i].rxinterval = + musb_readb(musb_base, 0x10 + MUSB_RXINTERVAL); + + musb_context.index_regs[i].txfunaddr = + musb_read_txfunaddr(musb_base, i); + musb_context.index_regs[i].txhubaddr = + musb_read_txhubaddr(musb_base, i); + musb_context.index_regs[i].txhubport = + musb_read_txhubport(musb_base, i); + + musb_context.index_regs[i].rxfunaddr = + musb_read_rxfunaddr(musb_base, i); + musb_context.index_regs[i].rxhubaddr = + musb_read_rxhubaddr(musb_base, i); + musb_context.index_regs[i].rxhubport = + musb_read_rxhubport(musb_base, i); + } + } + + musb_writeb(musb_base, MUSB_INDEX, musb_context.index); + + musb_platform_save_context(&musb_context); +} + +void musb_restore_context(struct musb *musb) +{ + int i; + void __iomem *musb_base = musb->mregs; + void __iomem *ep_target_regs; + + musb_platform_restore_context(&musb_context); + + if (is_host_enabled(musb)) { + musb_writew(musb_base, MUSB_FRAME, musb_context.frame); + musb_writeb(musb_base, MUSB_TESTMODE, musb_context.testmode); + } + musb_writeb(musb_base, MUSB_POWER, musb_context.power); + musb_writew(musb_base, MUSB_INTRTXE, musb_context.intrtxe); + musb_writew(musb_base, MUSB_INTRRXE, musb_context.intrrxe); + musb_writeb(musb_base, MUSB_INTRUSBE, musb_context.intrusbe); + musb_writeb(musb_base, MUSB_DEVCTL, musb_context.devctl); + + for (i = 0; i < MUSB_C_NUM_EPS; ++i) { + musb_writeb(musb_base, MUSB_INDEX, i); + musb_writew(musb_base, 0x10 + MUSB_TXMAXP, + musb_context.index_regs[i].txmaxp); + musb_writew(musb_base, 0x10 + MUSB_TXCSR, + musb_context.index_regs[i].txcsr); + musb_writew(musb_base, 0x10 + MUSB_RXMAXP, + musb_context.index_regs[i].rxmaxp); + musb_writew(musb_base, 0x10 + MUSB_RXCSR, + musb_context.index_regs[i].rxcsr); + + if (musb->dyn_fifo) { + musb_write_txfifosz(musb_base, + musb_context.index_regs[i].txfifosz); + musb_write_rxfifosz(musb_base, + musb_context.index_regs[i].rxfifosz); + musb_write_txfifoadd(musb_base, + musb_context.index_regs[i].txfifoadd); + musb_write_rxfifoadd(musb_base, + musb_context.index_regs[i].rxfifoadd); + } + + if (is_host_enabled(musb)) { + musb_writeb(musb_base, 0x10 + MUSB_TXTYPE, + musb_context.index_regs[i].txtype); + musb_writeb(musb_base, 0x10 + MUSB_TXINTERVAL, + musb_context.index_regs[i].txinterval); + musb_writeb(musb_base, 0x10 + MUSB_RXTYPE, + musb_context.index_regs[i].rxtype); + musb_writeb(musb_base, 0x10 + MUSB_RXINTERVAL, + + musb_context.index_regs[i].rxinterval); + musb_write_txfunaddr(musb_base, i, + musb_context.index_regs[i].txfunaddr); + musb_write_txhubaddr(musb_base, i, + musb_context.index_regs[i].txhubaddr); + musb_write_txhubport(musb_base, i, + musb_context.index_regs[i].txhubport); + + ep_target_regs = + musb_read_target_reg_base(i, musb_base); + + musb_write_rxfunaddr(ep_target_regs, + musb_context.index_regs[i].rxfunaddr); + musb_write_rxhubaddr(ep_target_regs, + musb_context.index_regs[i].rxhubaddr); + musb_write_rxhubport(ep_target_regs, + musb_context.index_regs[i].rxhubport); + } + } + + musb_writeb(musb_base, MUSB_INDEX, musb_context.index); +} + static int musb_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -2188,6 +2330,8 @@ static int musb_suspend(struct device *dev) */ } + musb_save_context(musb); + if (musb->set_clock) musb->set_clock(musb->clock, 0); else @@ -2209,6 +2353,8 @@ static int musb_resume_noirq(struct device *dev) else clk_enable(musb->clock); + musb_restore_context(musb); + /* for static cmos like DaVinci, register values were preserved * unless for some reason the whole soc powered down or the USB * module got reset through the PSC (vs just being disabled). diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index eaa0114..3d66c3e 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -454,6 +454,45 @@ struct musb { #endif }; +#ifdef CONFIG_PM +struct musb_csr_regs { + /* FIFO registers */ + u16 txmaxp, txcsr, rxmaxp, rxcsr; + u16 rxfifoadd, txfifoadd; + u8 txtype, txinterval, rxtype, rxinterval; + u8 rxfifosz, txfifosz; + u8 txfunaddr, txhubaddr, txhubport; + u8 rxfunaddr, rxhubaddr, rxhubport; +}; + +struct musb_context_registers { + +#if defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP2430) + u32 otg_sysconfig, otg_forcestandby; +#endif + u8 power; + u16 intrtxe, intrrxe; + u8 intrusbe; + u16 frame; + u8 index, testmode; + + u8 devctl, misc; + + struct musb_csr_regs index_regs[MUSB_C_NUM_EPS]; +}; + +#if defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP2430) +extern void musb_platform_save_context(struct musb_context_registers + *musb_context); +extern void musb_platform_restore_context(struct musb_context_registers + *musb_context); +#else +#define musb_platform_save_context(x) do {} while (0) +#define musb_platform_restore_context(x) do {} while (0) +#endif + +#endif + static inline void musb_set_vbus(struct musb *musb, int is_on) { musb->board_set_vbus(musb, is_on); diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h index 9a8621a..895fb05 100644 --- a/drivers/usb/musb/musb_regs.h +++ b/drivers/usb/musb/musb_regs.h @@ -326,6 +326,26 @@ static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off) musb_writew(mbase, MUSB_RXFIFOADD, c_off); } +static inline u8 musb_read_txfifosz(void __iomem *mbase) +{ + return musb_readb(mbase, MUSB_TXFIFOSZ); +} + +static inline u16 musb_read_txfifoadd(void __iomem *mbase) +{ + return musb_readw(mbase, MUSB_TXFIFOADD); +} + +static inline u8 musb_read_rxfifosz(void __iomem *mbase) +{ + return musb_readb(mbase, MUSB_RXFIFOSZ); +} + +static inline u16 musb_read_rxfifoadd(void __iomem *mbase) +{ + return musb_readw(mbase, MUSB_RXFIFOADD); +} + static inline u8 musb_read_configdata(void __iomem *mbase) { musb_writeb(mbase, MUSB_INDEX, 0); @@ -381,6 +401,36 @@ static inline void musb_write_txhubport(void __iomem *mbase, u8 epnum, qh_h_port_reg); } +static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum) +{ + return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXFUNCADDR)); +} + +static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum) +{ + return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXHUBADDR)); +} + +static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum) +{ + return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXHUBPORT)); +} + +static inline u8 musb_read_txfunaddr(void __iomem *mbase, u8 epnum) +{ + return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXFUNCADDR)); +} + +static inline u8 musb_read_txhubaddr(void __iomem *mbase, u8 epnum) +{ + return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBADDR)); +} + +static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum) +{ + return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBPORT)); +} + #else /* CONFIG_BLACKFIN */ #define USB_BASE USB_FADDR @@ -460,6 +510,22 @@ static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off) { } +static inline u8 musb_read_txfifosz(void __iomem *mbase) +{ +} + +static inline u16 musb_read_txfifoadd(void __iomem *mbase) +{ +} + +static inline u8 musb_read_rxfifosz(void __iomem *mbase) +{ +} + +static inline u16 musb_read_rxfifoadd(void __iomem *mbase) +{ +} + static inline u8 musb_read_configdata(void __iomem *mbase) { return 0; @@ -505,6 +571,30 @@ static inline void musb_write_txhubport(void __iomem *mbase, u8 epnum, { } +static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum) +{ +} + +static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum) +{ +} + +static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum) +{ +} + +static inline u8 musb_read_txfunaddr(void __iomem *mbase, u8 epnum) +{ +} + +static inline u8 musb_read_txhubaddr(void __iomem *mbase, u8 epnum) +{ +} + +static inline void musb_read_txhubport(void __iomem *mbase, u8 epnum) +{ +} + #endif /* CONFIG_BLACKFIN */ #endif /* __MUSB_REGS_H__ */ diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 83beeac..15a3f27 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -255,6 +255,22 @@ int __init musb_platform_init(struct musb *musb) return 0; } +#ifdef CONFIG_PM +void musb_platform_save_context(struct musb_context_registers + *musb_context) +{ + musb_context->otg_sysconfig = omap_readl(OTG_SYSCONFIG); + musb_context->otg_forcestandby = omap_readl(OTG_FORCESTDBY); +} + +void musb_platform_restore_context(struct musb_context_registers + *musb_context) +{ + omap_writel(musb_context->otg_sysconfig, OTG_SYSCONFIG); + omap_writel(musb_context->otg_forcestandby, OTG_FORCESTDBY); +} +#endif + int musb_platform_suspend(struct musb *musb) { u32 l; -- cgit v0.10.2 From 8573e6a673fc99bd89a6c08ef9841d8b52f9d3c5 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 21 Jan 2010 15:33:53 +0200 Subject: USB: musb: get rid of omap_readl/writel we have those addresses already ioremaped, so let's use our __raw_readl/writel wrappers. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 2c53da7..a6dc18c 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2234,7 +2234,7 @@ void musb_save_context(struct musb *musb) musb_writeb(musb_base, MUSB_INDEX, musb_context.index); - musb_platform_save_context(&musb_context); + musb_platform_save_context(musb, &musb_context); } void musb_restore_context(struct musb *musb) @@ -2243,7 +2243,7 @@ void musb_restore_context(struct musb *musb) void __iomem *musb_base = musb->mregs; void __iomem *ep_target_regs; - musb_platform_restore_context(&musb_context); + musb_platform_restore_context(musb, &musb_context); if (is_host_enabled(musb)) { musb_writew(musb_base, MUSB_FRAME, musb_context.frame); diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 3d66c3e..74a55b9 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -482,13 +482,13 @@ struct musb_context_registers { }; #if defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP2430) -extern void musb_platform_save_context(struct musb_context_registers - *musb_context); -extern void musb_platform_restore_context(struct musb_context_registers - *musb_context); +extern void musb_platform_save_context(struct musb *musb, + struct musb_context_registers *musb_context); +extern void musb_platform_restore_context(struct musb *musb, + struct musb_context_registers *musb_context); #else -#define musb_platform_save_context(x) do {} while (0) -#define musb_platform_restore_context(x) do {} while (0) +#define musb_platform_save_context(m, x) do {} while (0) +#define musb_platform_restore_context(m, x) do {} while (0) #endif #endif diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 15a3f27..3fe1686 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -220,7 +220,7 @@ int __init musb_platform_init(struct musb *musb) musb_platform_resume(musb); - l = omap_readl(OTG_SYSCONFIG); + l = musb_readl(musb->mregs, OTG_SYSCONFIG); l &= ~ENABLEWAKEUP; /* disable wakeup */ l &= ~NOSTDBY; /* remove possible nostdby */ l |= SMARTSTDBY; /* enable smart standby */ @@ -233,17 +233,19 @@ int __init musb_platform_init(struct musb *musb) */ if (!cpu_is_omap3430()) l |= AUTOIDLE; /* enable auto idle */ - omap_writel(l, OTG_SYSCONFIG); + musb_writel(musb->mregs, OTG_SYSCONFIG, l); - l = omap_readl(OTG_INTERFSEL); + l = musb_readl(musb->mregs, OTG_INTERFSEL); l |= ULPI_12PIN; - omap_writel(l, OTG_INTERFSEL); + musb_writel(musb->mregs, OTG_INTERFSEL, l); pr_debug("HS USB OTG: revision 0x%x, sysconfig 0x%02x, " "sysstatus 0x%x, intrfsel 0x%x, simenable 0x%x\n", - omap_readl(OTG_REVISION), omap_readl(OTG_SYSCONFIG), - omap_readl(OTG_SYSSTATUS), omap_readl(OTG_INTERFSEL), - omap_readl(OTG_SIMENABLE)); + musb_readl(musb->mregs, OTG_REVISION), + musb_readl(musb->mregs, OTG_SYSCONFIG), + musb_readl(musb->mregs, OTG_SYSSTATUS), + musb_readl(musb->mregs, OTG_INTERFSEL), + musb_readl(musb->mregs, OTG_SIMENABLE)); omap_vbus_power(musb, musb->board_mode == MUSB_HOST, 1); @@ -256,18 +258,18 @@ int __init musb_platform_init(struct musb *musb) } #ifdef CONFIG_PM -void musb_platform_save_context(struct musb_context_registers - *musb_context) +void musb_platform_save_context(struct musb *musb, + struct musb_context_registers *musb_context) { - musb_context->otg_sysconfig = omap_readl(OTG_SYSCONFIG); - musb_context->otg_forcestandby = omap_readl(OTG_FORCESTDBY); + musb_context->otg_sysconfig = musb_readl(musb->mregs, OTG_SYSCONFIG); + musb_context->otg_forcestandby = musb_readl(musb->mregs, OTG_FORCESTDBY); } -void musb_platform_restore_context(struct musb_context_registers - *musb_context) +void musb_platform_restore_context(struct musb *musb, + struct musb_context_registers *musb_context) { - omap_writel(musb_context->otg_sysconfig, OTG_SYSCONFIG); - omap_writel(musb_context->otg_forcestandby, OTG_FORCESTDBY); + musb_writel(musb->mregs, OTG_SYSCONFIG, musb_context->otg_sysconfig); + musb_writel(musb->mregs, OTG_FORCESTDBY, musb_context->otg_forcestandby); } #endif @@ -279,13 +281,13 @@ int musb_platform_suspend(struct musb *musb) return 0; /* in any role */ - l = omap_readl(OTG_FORCESTDBY); + l = musb_readl(musb->mregs, OTG_FORCESTDBY); l |= ENABLEFORCE; /* enable MSTANDBY */ - omap_writel(l, OTG_FORCESTDBY); + musb_writel(musb->mregs, OTG_FORCESTDBY, l); - l = omap_readl(OTG_SYSCONFIG); + l = musb_readl(musb->mregs, OTG_SYSCONFIG); l |= ENABLEWAKEUP; /* enable wakeup */ - omap_writel(l, OTG_SYSCONFIG); + musb_writel(musb->mregs, OTG_SYSCONFIG, l); otg_set_suspend(musb->xceiv, 1); @@ -311,13 +313,13 @@ static int musb_platform_resume(struct musb *musb) else clk_enable(musb->clock); - l = omap_readl(OTG_SYSCONFIG); + l = musb_readl(musb->mregs, OTG_SYSCONFIG); l &= ~ENABLEWAKEUP; /* disable wakeup */ - omap_writel(l, OTG_SYSCONFIG); + musb_writel(musb->mregs, OTG_SYSCONFIG, l); - l = omap_readl(OTG_FORCESTDBY); + l = musb_readl(musb->mregs, OTG_FORCESTDBY); l &= ~ENABLEFORCE; /* disable MSTANDBY */ - omap_writel(l, OTG_FORCESTDBY); + musb_writel(musb->mregs, OTG_FORCESTDBY, l); return 0; } diff --git a/drivers/usb/musb/omap2430.h b/drivers/usb/musb/omap2430.h index fbede77..40b3c02 100644 --- a/drivers/usb/musb/omap2430.h +++ b/drivers/usb/musb/omap2430.h @@ -10,47 +10,43 @@ #ifndef __MUSB_OMAP243X_H__ #define __MUSB_OMAP243X_H__ -#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430) -#include #include /* * OMAP2430-specific definitions */ -#define MENTOR_BASE_OFFSET 0 -#if defined(CONFIG_ARCH_OMAP2430) -#define OMAP_HSOTG_BASE (OMAP243X_HS_BASE) -#elif defined(CONFIG_ARCH_OMAP3430) -#define OMAP_HSOTG_BASE (OMAP34XX_HSUSB_OTG_BASE) -#endif -#define OMAP_HSOTG(offset) (OMAP_HSOTG_BASE + 0x400 + (offset)) -#define OTG_REVISION OMAP_HSOTG(0x0) -#define OTG_SYSCONFIG OMAP_HSOTG(0x4) +#define OTG_REVISION 0x400 + +#define OTG_SYSCONFIG 0x404 # define MIDLEMODE 12 /* bit position */ # define FORCESTDBY (0 << MIDLEMODE) # define NOSTDBY (1 << MIDLEMODE) # define SMARTSTDBY (2 << MIDLEMODE) + # define SIDLEMODE 3 /* bit position */ # define FORCEIDLE (0 << SIDLEMODE) # define NOIDLE (1 << SIDLEMODE) # define SMARTIDLE (2 << SIDLEMODE) + # define ENABLEWAKEUP (1 << 2) # define SOFTRST (1 << 1) # define AUTOIDLE (1 << 0) -#define OTG_SYSSTATUS OMAP_HSOTG(0x8) + +#define OTG_SYSSTATUS 0x408 # define RESETDONE (1 << 0) -#define OTG_INTERFSEL OMAP_HSOTG(0xc) + +#define OTG_INTERFSEL 0x40c # define EXTCP (1 << 2) -# define PHYSEL 0 /* bit position */ +# define PHYSEL 0 /* bit position */ # define UTMI_8BIT (0 << PHYSEL) # define ULPI_12PIN (1 << PHYSEL) # define ULPI_8PIN (2 << PHYSEL) -#define OTG_SIMENABLE OMAP_HSOTG(0x10) + +#define OTG_SIMENABLE 0x410 # define TM1 (1 << 0) -#define OTG_FORCESTDBY OMAP_HSOTG(0x14) -# define ENABLEFORCE (1 << 0) -#endif /* CONFIG_ARCH_OMAP2430 */ +#define OTG_FORCESTDBY 0x414 +# define ENABLEFORCE (1 << 0) #endif /* __MUSB_OMAP243X_H__ */ -- cgit v0.10.2 From ad517e9ed8723363ebff0c5b413cbaa503aeb0ce Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 21 Jan 2010 15:33:54 +0200 Subject: USB: musb: we already tested for dyn_fifo ... and even added a flag to struct musb, so let's use that. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index a6dc18c..3e9b3b0 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1398,21 +1398,10 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb) musb->nr_endpoints = 1; musb->epmask = 1; - if (reg & MUSB_CONFIGDATA_DYNFIFO) { - if (musb->config->dyn_fifo) - status = ep_config_from_table(musb); - else { - ERR("reconfigure software for Dynamic FIFOs\n"); - status = -ENODEV; - } - } else { - if (!musb->config->dyn_fifo) - status = ep_config_from_hw(musb); - else { - ERR("reconfigure software for static FIFOs\n"); - return -ENODEV; - } - } + if (musb->dyn_fifo) + status = ep_config_from_table(musb); + else + status = ep_config_from_hw(musb); if (status < 0) return status; -- cgit v0.10.2 From c58bfa6b97731590e42cba6bd13829c4e480992f Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 21 Jan 2010 15:33:55 +0200 Subject: USB: musb: deprecate what we don't use after 2.6.34, those fields will be removed from struct musb_hdrc_platform_data, it's expected that other architectures are fixed by then. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h index 4b7f8fa..8e0f2bc 100644 --- a/include/linux/usb/musb.h +++ b/include/linux/usb/musb.h @@ -30,26 +30,26 @@ struct musb_hdrc_eps_bits { struct musb_hdrc_config { /* MUSB configuration-specific details */ unsigned multipoint:1; /* multipoint device */ - unsigned dyn_fifo:1; /* supports dynamic fifo sizing */ - unsigned soft_con:1; /* soft connect required */ - unsigned utm_16:1; /* utm data witdh is 16 bits */ + unsigned dyn_fifo:1 __deprecated; /* supports dynamic fifo sizing */ + unsigned soft_con:1 __deprecated; /* soft connect required */ + unsigned utm_16:1 __deprecated; /* utm data witdh is 16 bits */ unsigned big_endian:1; /* true if CPU uses big-endian */ unsigned mult_bulk_tx:1; /* Tx ep required for multbulk pkts */ unsigned mult_bulk_rx:1; /* Rx ep required for multbulk pkts */ unsigned high_iso_tx:1; /* Tx ep required for HB iso */ unsigned high_iso_rx:1; /* Rx ep required for HD iso */ - unsigned dma:1; /* supports DMA */ - unsigned vendor_req:1; /* vendor registers required */ + unsigned dma:1 __deprecated; /* supports DMA */ + unsigned vendor_req:1 __deprecated; /* vendor registers required */ u8 num_eps; /* number of endpoints _with_ ep0 */ - u8 dma_channels; /* number of dma channels */ + u8 dma_channels __deprecated; /* number of dma channels */ u8 dyn_fifo_size; /* dynamic size in bytes */ - u8 vendor_ctrl; /* vendor control reg width */ - u8 vendor_stat; /* vendor status reg witdh */ - u8 dma_req_chan; /* bitmask for required dma channels */ + u8 vendor_ctrl __deprecated; /* vendor control reg width */ + u8 vendor_stat __deprecated; /* vendor status reg witdh */ + u8 dma_req_chan __deprecated; /* bitmask for required dma channels */ u8 ram_bits; /* ram address size */ - struct musb_hdrc_eps_bits *eps_bits; + struct musb_hdrc_eps_bits *eps_bits __deprecated; #ifdef CONFIG_BLACKFIN /* A GPIO controlling VRSEL in Blackfin */ unsigned int gpio_vrsel; -- cgit v0.10.2 From 3d268645d50989bc874fadf20db6fd6d17b380dc Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 21 Jan 2010 15:33:56 +0200 Subject: USB: musb: tusb6010: use resource_size Trivial patch, no functional changes. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 88b587c..ab776a8 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -1118,7 +1118,7 @@ int __init musb_platform_init(struct musb *musb) } musb->sync = mem->start; - sync = ioremap(mem->start, mem->end - mem->start + 1); + sync = ioremap(mem->start, resource_size(mem)); if (!sync) { pr_debug("ioremap for sync failed\n"); ret = -ENOMEM; -- cgit v0.10.2 From da5108e1a350c84b185b5f11aa58fea93a204fe0 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 21 Jan 2010 15:33:57 +0200 Subject: USB: musb: unmap base if we can't probe when probe() fails, we should iounmap() the mapped address. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 3e9b3b0..de7b377 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2110,6 +2110,7 @@ static int __init musb_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; int irq = platform_get_irq(pdev, 0); + int status; struct resource *iomem; void __iomem *base; @@ -2127,7 +2128,12 @@ static int __init musb_probe(struct platform_device *pdev) /* clobbered by use_dma=n */ orig_dma_mask = dev->dma_mask; #endif - return musb_init_controller(dev, irq, base); + + status = musb_init_controller(dev, irq, base); + if (status < 0) + iounmap(base); + + return status; } static int __exit musb_remove(struct platform_device *pdev) -- cgit v0.10.2 From ab3bbfa1af64a978ffff45861a1b694313a03537 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 21 Jan 2010 15:33:58 +0200 Subject: USB: musb: only print info message if probe() is successful we were printing the info about musb probe too early where it was still possible for things to go wrong. Move the down right before the return 0 statement. While at that also convert pr_info to dev_info. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index de7b377..0f13ded 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2004,19 +2004,6 @@ bad_config: musb->irq_wake = 0; } - pr_info("%s: USB %s mode controller at %p using %s, IRQ %d\n", - musb_driver_name, - ({char *s; - switch (musb->board_mode) { - case MUSB_HOST: s = "Host"; break; - case MUSB_PERIPHERAL: s = "Peripheral"; break; - default: s = "OTG"; break; - }; s; }), - ctrl, - (is_dma_capable() && musb->dma_controller) - ? "DMA" : "PIO", - musb->nIrq); - /* host side needs more setup */ if (is_host_enabled(musb)) { struct usb_hcd *hcd = musb_to_hcd(musb); @@ -2079,6 +2066,18 @@ bad_config: if (status) goto fail2; + dev_info(dev, "USB %s mode controller at %p using %s, IRQ %d\n", + ({char *s; + switch (musb->board_mode) { + case MUSB_HOST: s = "Host"; break; + case MUSB_PERIPHERAL: s = "Peripheral"; break; + default: s = "OTG"; break; + }; s; }), + ctrl, + (is_dma_capable() && musb->dma_controller) + ? "DMA" : "PIO", + musb->nIrq); + return 0; fail2: -- cgit v0.10.2 From 5b520259ab6d661b8d5eb39dd17cc5e4e4553c62 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Mon, 25 Jan 2010 11:07:19 +0900 Subject: USB: s3c-hsotg: replace deprecated dma_sync_single() This replaces deprecated dma_sync_single() with dma_sync_single_for_cpu(). There is no functional change because dma_sync_single() simply calls dma_sync_single_for_cpu(): static inline void __deprecated dma_sync_single(struct device *dev, dma_addr_t addr, size_t size, enum dma_data_direction dir) { dma_sync_single_for_cpu(dev, addr, size, dir); } This fixes the following compile warnings: drivers/usb/gadget/s3c-hsotg.c: In function 's3c_hsotg_unmap_dma': drivers/usb/gadget/s3c-hsotg.c:376: warning: 'dma_sync_single' is deprecated (declared at /home/fujita/git/linux-2.6/include/linux/dma-mapping.h:109) drivers/usb/gadget/s3c-hsotg.c: In function 's3c_hsotg_map_dma': drivers/usb/gadget/s3c-hsotg.c:758: warning: 'dma_sync_single' is deprecated (declared at /home/fujita/git/linux-2.6/include/linux/dma-mapping.h:109) Signed-off-by: FUJITA Tomonori Acked-by: Ben Dooks Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 2a5ea06..7e5bf59 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -374,7 +374,7 @@ static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg, req->dma = DMA_ADDR_INVALID; hs_req->mapped = 0; } else { - dma_sync_single(hsotg->dev, req->dma, req->length, dir); + dma_sync_single_for_cpu(hsotg->dev, req->dma, req->length, dir); } } @@ -756,7 +756,7 @@ static int s3c_hsotg_map_dma(struct s3c_hsotg *hsotg, hs_req->mapped = 1; req->dma = dma; } else { - dma_sync_single(hsotg->dev, req->dma, req->length, dir); + dma_sync_single_for_cpu(hsotg->dev, req->dma, req->length, dir); hs_req->mapped = 0; } -- cgit v0.10.2 From f10718f5b812a2c55e37396518d426f88d5e35fc Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 25 Jan 2010 14:53:33 +0300 Subject: USB: io_edgeport: eliminate get_string() Johan Hovold points out that get_string() is basically just a re-implimentation of usb_string(). It is also buggy. It does DMA on the stack and it doesn't handle negative returns from usb_get_descriptor(). Plus unicode_to_ascii() is a rubbish function and moving to usb_string() avoids using it. Let's eliminate get_string() entirely. Reported-by: Johan Hovold Signed-off-by: Dan Carpenter Acked-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 0945600..c055c8b 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -364,43 +364,6 @@ static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial) release_firmware(fw); } - -/************************************************************************ - * * - * Get string descriptor from device * - * * - ************************************************************************/ -static int get_string(struct usb_device *dev, int Id, char *string, int buflen) -{ - struct usb_string_descriptor *StringDesc = NULL; - struct usb_string_descriptor *pStringDesc = NULL; - int ret = 0; - - dbg("%s - USB String ID = %d", __func__, Id); - - StringDesc = kmalloc(sizeof(*StringDesc), GFP_KERNEL); - if (!StringDesc) - goto free; - if (usb_get_descriptor(dev, USB_DT_STRING, Id, StringDesc, sizeof(*StringDesc)) <= 0) - goto free; - - pStringDesc = kmalloc(StringDesc->bLength, GFP_KERNEL); - if (!pStringDesc) - goto free; - - if (usb_get_descriptor(dev, USB_DT_STRING, Id, pStringDesc, StringDesc->bLength) <= 0) - goto free; - - unicode_to_ascii(string, buflen, pStringDesc->wData, pStringDesc->bLength/2); - ret = strlen(string); - dbg("%s - USB String %s", __func__, string); -free: - kfree(StringDesc); - kfree(pStringDesc); - return ret; -} - - #if 0 /************************************************************************ * @@ -2998,10 +2961,12 @@ static int edge_startup(struct usb_serial *serial) usb_set_serial_data(serial, edge_serial); /* get the name for the device from the device */ - i = get_string(dev, dev->descriptor.iManufacturer, + i = usb_string(dev, dev->descriptor.iManufacturer, &edge_serial->name[0], MAX_NAME_LEN+1); + if (i < 0) + i = 0; edge_serial->name[i++] = ' '; - get_string(dev, dev->descriptor.iProduct, + usb_string(dev, dev->descriptor.iProduct, &edge_serial->name[i], MAX_NAME_LEN+2 - i); dev_info(&serial->dev->dev, "%s detected\n", edge_serial->name); -- cgit v0.10.2 From fb088e335d78f866be2e56eac6d500112a96aa11 Mon Sep 17 00:00:00 2001 From: Mike Dunn Date: Tue, 26 Jan 2010 12:12:12 -0500 Subject: USB: serial: add support for serial port on the moschip 7715 Add support for the serial port on devices based on the MosChip 7715, which provides a serial and parallel port on a single usb interface. This is added to the existing driver for the Moschip 7720 dual serial port device. The 7715 is very similiar to the 7720, requiring only the addition of a calc_num_ports() function, a separate interrupt-in endpoint callback, and some manipulation of the port pointers added to the attach() function to correct the fact that the usbserial core erroneously assigns the first bulk in/out endpoint pair to the serial port (the 7715 uses these for its parallel port). There is no support for the 7715's parallel port yet. Signed-off-by: Mike Dunn Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 2ce1a2a..e0aa031 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -81,12 +81,15 @@ struct moschip_serial { static int debug; +static struct usb_serial_driver moschip7720_2port_driver; + #define USB_VENDOR_ID_MOSCHIP 0x9710 #define MOSCHIP_DEVICE_ID_7720 0x7720 #define MOSCHIP_DEVICE_ID_7715 0x7715 static const struct usb_device_id moschip_port_id_table[] = { { USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7720) }, + { USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7715) }, { } /* terminating entry */ }; MODULE_DEVICE_TABLE(usb, moschip_port_id_table); @@ -186,6 +189,75 @@ exit: } /* + * mos7715_interrupt_callback + * this is the 7715's callback function for when we have received data on + * the interrupt endpoint. + */ +static void mos7715_interrupt_callback(struct urb *urb) +{ + int result; + int length; + int status = urb->status; + __u8 *data; + __u8 iir; + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", __func__, + status); + return; + default: + dbg("%s - nonzero urb status received: %d", __func__, + status); + goto exit; + } + + length = urb->actual_length; + data = urb->transfer_buffer; + + /* Structure of data from 7715 device: + * Byte 1: IIR serial Port + * Byte 2: unused + * Byte 2: DSR parallel port + * Byte 4: FIFO status for both */ + + if (unlikely(length != 4)) { + dbg("Wrong data !!!"); + return; + } + + iir = data[0]; + if (!(iir & 0x01)) { /* serial port interrupt pending */ + switch (iir & 0x0f) { + case SERIAL_IIR_RLS: + dbg("Serial Port: Receiver status error or address " + "bit detected in 9-bit mode\n"); + break; + case SERIAL_IIR_CTI: + dbg("Serial Port: Receiver time out"); + break; + case SERIAL_IIR_MS: + dbg("Serial Port: Modem status change"); + break; + } + } + +exit: + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result) + dev_err(&urb->dev->dev, + "%s - Error %d submitting control urb\n", + __func__, result); + return; +} + +/* * mos7720_bulk_in_callback * this is the callback function for when we have received data on the * bulk in endpoint. @@ -283,7 +355,7 @@ static int send_mos_cmd(struct usb_serial *serial, __u8 request, __u16 value, if (value < MOS_MAX_PORT) { if (product == MOSCHIP_DEVICE_ID_7715) - value = value*0x100+0x100; + value = 0x0200; /* identifies the 7715's serial port */ else value = value*0x100+0x200; } else { @@ -319,6 +391,35 @@ out: return status; } + +/* + * mos77xx_probe + * this function installs the appropriate read interrupt endpoint callback + * depending on whether the device is a 7720 or 7715, thus avoiding costly + * run-time checks in the high-frequency callback routine itself. + */ +static int mos77xx_probe(struct usb_serial *serial, + const struct usb_device_id *id) +{ + if (id->idProduct == MOSCHIP_DEVICE_ID_7715) + moschip7720_2port_driver.read_int_callback = + mos7715_interrupt_callback; + else + moschip7720_2port_driver.read_int_callback = + mos7720_interrupt_callback; + + return 0; +} + +static int mos77xx_calc_num_ports(struct usb_serial *serial) +{ + u16 product = le16_to_cpu(serial->dev->descriptor.idProduct); + if (product == MOSCHIP_DEVICE_ID_7715) + return 1; + + return 2; +} + static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port) { struct usb_serial *serial; @@ -1495,6 +1596,7 @@ static int mos7720_startup(struct usb_serial *serial) struct usb_device *dev; int i; char data; + u16 product = le16_to_cpu(serial->dev->descriptor.idProduct); dbg("%s: Entering ..........", __func__); @@ -1514,6 +1616,29 @@ static int mos7720_startup(struct usb_serial *serial) usb_set_serial_data(serial, mos7720_serial); + /* + * The 7715 uses the first bulk in/out endpoint pair for the parallel + * port, and the second for the serial port. Because the usbserial core + * assumes both pairs are serial ports, we must engage in a bit of + * subterfuge and swap the pointers for ports 0 and 1 in order to make + * port 0 point to the serial port. However, both moschip devices use a + * single interrupt-in endpoint for both ports (as mentioned a little + * further down), and this endpoint was assigned to port 0. So after + * the swap, we must copy the interrupt endpoint elements from port 1 + * (as newly assigned) to port 0, and null out port 1 pointers. + */ + if (product == MOSCHIP_DEVICE_ID_7715) { + struct usb_serial_port *tmp = serial->port[0]; + serial->port[0] = serial->port[1]; + serial->port[1] = tmp; + serial->port[0]->interrupt_in_urb = tmp->interrupt_in_urb; + serial->port[0]->interrupt_in_buffer = tmp->interrupt_in_buffer; + serial->port[0]->interrupt_in_endpointAddress = + tmp->interrupt_in_endpointAddress; + serial->port[1]->interrupt_in_urb = NULL; + serial->port[1]->interrupt_in_buffer = NULL; + } + /* we set up the pointers to the endpoints in the mos7720_open * * function, as the structures aren't created yet. */ @@ -1529,7 +1654,7 @@ static int mos7720_startup(struct usb_serial *serial) /* Initialize all port interrupt end point to port 0 int * endpoint. Our device has only one interrupt endpoint - * comman to all ports */ + * common to all ports */ serial->port[i]->interrupt_in_endpointAddress = serial->port[0]->interrupt_in_endpointAddress; @@ -1584,11 +1709,12 @@ static struct usb_serial_driver moschip7720_2port_driver = { .description = "Moschip 2 port adapter", .usb_driver = &usb_driver, .id_table = moschip_port_id_table, - .num_ports = 2, + .calc_num_ports = mos77xx_calc_num_ports, .open = mos7720_open, .close = mos7720_close, .throttle = mos7720_throttle, .unthrottle = mos7720_unthrottle, + .probe = mos77xx_probe, .attach = mos7720_startup, .release = mos7720_release, .ioctl = mos7720_ioctl, @@ -1600,7 +1726,7 @@ static struct usb_serial_driver moschip7720_2port_driver = { .chars_in_buffer = mos7720_chars_in_buffer, .break_ctl = mos7720_break, .read_bulk_callback = mos7720_bulk_in_callback, - .read_int_callback = mos7720_interrupt_callback, + .read_int_callback = NULL /* dynamically assigned in probe() */ }; static int __init moschip7720_init(void) -- cgit v0.10.2 From 5e23e90f33888769ffe253663cc5f3ea0bb6da49 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Wed, 27 Jan 2010 18:38:03 +0100 Subject: USB: pxa27x_udc: Fix deadlocks on request queueing As reported by Antonio, there are cases where the ep->lock can be taken twice, triggering a deadlock. The typical sequence is : irq_handler \ -> gadget.complete() \ -> pxa27x_udc.pxa_ep_queue() : ep->lock is taken \ -> gadget.complete() \ -> pxa27x_udc.pxa_ep_queue() : ep->lock is taken ==> *deadlock* The patch fixes this by : - releasing the lock each time gadget.complete() is called - adding a check in handle_ep() to detect a recursive call, in which case the function becomes on no-op. The patch is still not good enough for ep0. For this unique endpoint, another well thought over patch will be needed. Reported-by: Antonio Ospite Tested-by: Antonio Ospite Signed-off-by: Robert Jarzmik Cc: David Brownell Cc: Eric Miao Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index e8b4b69..05b892c 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -742,13 +742,17 @@ static void ep_del_request(struct pxa_ep *ep, struct pxa27x_request *req) * @ep: pxa physical endpoint * @req: pxa request * @status: usb request status sent to gadget API + * @pflags: flags of previous spinlock_irq_save() or NULL if no lock held * - * Context: ep->lock held + * Context: ep->lock held if flags not NULL, else ep->lock released * * Retire a pxa27x usb request. Endpoint must be locked. */ -static void req_done(struct pxa_ep *ep, struct pxa27x_request *req, int status) +static void req_done(struct pxa_ep *ep, struct pxa27x_request *req, int status, + unsigned long *pflags) { + unsigned long flags; + ep_del_request(ep, req); if (likely(req->req.status == -EINPROGRESS)) req->req.status = status; @@ -760,38 +764,48 @@ static void req_done(struct pxa_ep *ep, struct pxa27x_request *req, int status) &req->req, status, req->req.actual, req->req.length); + if (pflags) + spin_unlock_irqrestore(&ep->lock, *pflags); + local_irq_save(flags); req->req.complete(&req->udc_usb_ep->usb_ep, &req->req); + local_irq_restore(flags); + if (pflags) + spin_lock_irqsave(&ep->lock, *pflags); } /** * ep_end_out_req - Ends endpoint OUT request * @ep: physical endpoint * @req: pxa request + * @pflags: flags of previous spinlock_irq_save() or NULL if no lock held * - * Context: ep->lock held + * Context: ep->lock held or released (see req_done()) * * Ends endpoint OUT request (completes usb request). */ -static void ep_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req) +static void ep_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req, + unsigned long *pflags) { inc_ep_stats_reqs(ep, !USB_DIR_IN); - req_done(ep, req, 0); + req_done(ep, req, 0, pflags); } /** * ep0_end_out_req - Ends control endpoint OUT request (ends data stage) * @ep: physical endpoint * @req: pxa request + * @pflags: flags of previous spinlock_irq_save() or NULL if no lock held * - * Context: ep->lock held + * Context: ep->lock held or released (see req_done()) * * Ends control endpoint OUT request (completes usb request), and puts * control endpoint into idle state */ -static void ep0_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req) +static void ep0_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req, + unsigned long *pflags) { set_ep0state(ep->dev, OUT_STATUS_STAGE); - ep_end_out_req(ep, req); + ep_end_out_req(ep, req, pflags); ep0_idle(ep->dev); } @@ -799,31 +813,35 @@ static void ep0_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req) * ep_end_in_req - Ends endpoint IN request * @ep: physical endpoint * @req: pxa request + * @pflags: flags of previous spinlock_irq_save() or NULL if no lock held * - * Context: ep->lock held + * Context: ep->lock held or released (see req_done()) * * Ends endpoint IN request (completes usb request). */ -static void ep_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req) +static void ep_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req, + unsigned long *pflags) { inc_ep_stats_reqs(ep, USB_DIR_IN); - req_done(ep, req, 0); + req_done(ep, req, 0, pflags); } /** * ep0_end_in_req - Ends control endpoint IN request (ends data stage) * @ep: physical endpoint * @req: pxa request + * @pflags: flags of previous spinlock_irq_save() or NULL if no lock held * - * Context: ep->lock held + * Context: ep->lock held or released (see req_done()) * * Ends control endpoint IN request (completes usb request), and puts * control endpoint into status state */ -static void ep0_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req) +static void ep0_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req, + unsigned long *pflags) { set_ep0state(ep->dev, IN_STATUS_STAGE); - ep_end_in_req(ep, req); + ep_end_in_req(ep, req, pflags); } /** @@ -831,19 +849,22 @@ static void ep0_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req) * @ep: pxa endpoint * @status: usb request status * - * Context: ep->lock held + * Context: ep->lock released * * Dequeues all requests on an endpoint. As a side effect, interrupts will be * disabled on that endpoint (because no more requests). */ static void nuke(struct pxa_ep *ep, int status) { - struct pxa27x_request *req; + struct pxa27x_request *req; + unsigned long flags; + spin_lock_irqsave(&ep->lock, flags); while (!list_empty(&ep->queue)) { req = list_entry(ep->queue.next, struct pxa27x_request, queue); - req_done(ep, req, status); + req_done(ep, req, status, &flags); } + spin_unlock_irqrestore(&ep->lock, flags); } /** @@ -1123,6 +1144,7 @@ static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req, int rc = 0; int is_first_req; unsigned length; + int recursion_detected; req = container_of(_req, struct pxa27x_request, req); udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep); @@ -1152,6 +1174,7 @@ static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req, return -EMSGSIZE; spin_lock_irqsave(&ep->lock, flags); + recursion_detected = ep->in_handle_ep; is_first_req = list_empty(&ep->queue); ep_dbg(ep, "queue req %p(first=%s), len %d buf %p\n", @@ -1161,12 +1184,12 @@ static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req, if (!ep->enabled) { _req->status = -ESHUTDOWN; rc = -ESHUTDOWN; - goto out; + goto out_locked; } if (req->in_use) { ep_err(ep, "refusing to queue req %p (already queued)\n", req); - goto out; + goto out_locked; } length = _req->length; @@ -1174,12 +1197,13 @@ static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req, _req->actual = 0; ep_add_request(ep, req); + spin_unlock_irqrestore(&ep->lock, flags); if (is_ep0(ep)) { switch (dev->ep0state) { case WAIT_ACK_SET_CONF_INTERF: if (length == 0) { - ep_end_in_req(ep, req); + ep_end_in_req(ep, req, NULL); } else { ep_err(ep, "got a request of %d bytes while" "in state WAIT_ACK_SET_CONF_INTERF\n", @@ -1192,12 +1216,12 @@ static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req, case IN_DATA_STAGE: if (!ep_is_full(ep)) if (write_ep0_fifo(ep, req)) - ep0_end_in_req(ep, req); + ep0_end_in_req(ep, req, NULL); break; case OUT_DATA_STAGE: if ((length == 0) || !epout_has_pkt(ep)) if (read_ep0_fifo(ep, req)) - ep0_end_out_req(ep, req); + ep0_end_out_req(ep, req, NULL); break; default: ep_err(ep, "odd state %s to send me a request\n", @@ -1207,12 +1231,15 @@ static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req, break; } } else { - handle_ep(ep); + if (!recursion_detected) + handle_ep(ep); } out: - spin_unlock_irqrestore(&ep->lock, flags); return rc; +out_locked: + spin_unlock_irqrestore(&ep->lock, flags); + goto out; } /** @@ -1242,13 +1269,14 @@ static int pxa_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) /* make sure it's actually queued on this endpoint */ list_for_each_entry(req, &ep->queue, queue) { if (&req->req == _req) { - req_done(ep, req, -ECONNRESET); rc = 0; break; } } spin_unlock_irqrestore(&ep->lock, flags); + if (!rc) + req_done(ep, req, -ECONNRESET, NULL); return rc; } @@ -1445,7 +1473,6 @@ static int pxa_ep_disable(struct usb_ep *_ep) { struct pxa_ep *ep; struct udc_usb_ep *udc_usb_ep; - unsigned long flags; if (!_ep) return -EINVAL; @@ -1455,10 +1482,8 @@ static int pxa_ep_disable(struct usb_ep *_ep) if (!ep || is_ep0(ep) || !list_empty(&ep->queue)) return -EINVAL; - spin_lock_irqsave(&ep->lock, flags); ep->enabled = 0; nuke(ep, -ESHUTDOWN); - spin_unlock_irqrestore(&ep->lock, flags); pxa_ep_fifo_flush(_ep); udc_usb_ep->pxa_ep = NULL; @@ -1907,8 +1932,10 @@ static void handle_ep0_ctrl_req(struct pxa_udc *udc, } u; int i; int have_extrabytes = 0; + unsigned long flags; nuke(ep, -EPROTO); + spin_lock_irqsave(&ep->lock, flags); /* * In the PXA320 manual, in the section about Back-to-Back setup @@ -1947,10 +1974,13 @@ static void handle_ep0_ctrl_req(struct pxa_udc *udc, /* Tell UDC to enter Data Stage */ ep_write_UDCCSR(ep, UDCCSR0_SA | UDCCSR0_OPC); + spin_unlock_irqrestore(&ep->lock, flags); i = udc->driver->setup(&udc->gadget, &u.r); + spin_lock_irqsave(&ep->lock, flags); if (i < 0) goto stall; out: + spin_unlock_irqrestore(&ep->lock, flags); return; stall: ep_dbg(ep, "protocol STALL, udccsr0=%03x err %d\n", @@ -2055,13 +2085,13 @@ static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq) if (req && !ep_is_full(ep)) completed = write_ep0_fifo(ep, req); if (completed) - ep0_end_in_req(ep, req); + ep0_end_in_req(ep, req, NULL); break; case OUT_DATA_STAGE: /* SET_DESCRIPTOR */ if (epout_has_pkt(ep) && req) completed = read_ep0_fifo(ep, req); if (completed) - ep0_end_out_req(ep, req); + ep0_end_out_req(ep, req, NULL); break; case STALL: ep_write_UDCCSR(ep, UDCCSR0_FST); @@ -2091,7 +2121,7 @@ static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq) * Tries to transfer all pending request data into the endpoint and/or * transfer all pending data in the endpoint into usb requests. * - * Is always called when in_interrupt() or with ep->lock held. + * Is always called when in_interrupt() and with ep->lock released. */ static void handle_ep(struct pxa_ep *ep) { @@ -2100,10 +2130,17 @@ static void handle_ep(struct pxa_ep *ep) u32 udccsr; int is_in = ep->dir_in; int loop = 0; + unsigned long flags; + + spin_lock_irqsave(&ep->lock, flags); + if (ep->in_handle_ep) + goto recursion_detected; + ep->in_handle_ep = 1; do { completed = 0; udccsr = udc_ep_readl(ep, UDCCSR); + if (likely(!list_empty(&ep->queue))) req = list_entry(ep->queue.next, struct pxa27x_request, queue); @@ -2122,15 +2159,22 @@ static void handle_ep(struct pxa_ep *ep) if (unlikely(is_in)) { if (likely(!ep_is_full(ep))) completed = write_fifo(ep, req); - if (completed) - ep_end_in_req(ep, req); } else { if (likely(epout_has_pkt(ep))) completed = read_fifo(ep, req); - if (completed) - ep_end_out_req(ep, req); + } + + if (completed) { + if (is_in) + ep_end_in_req(ep, req, &flags); + else + ep_end_out_req(ep, req, &flags); } } while (completed); + + ep->in_handle_ep = 0; +recursion_detected: + spin_unlock_irqrestore(&ep->lock, flags); } /** diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h index e25225e..ff61e48 100644 --- a/drivers/usb/gadget/pxa27x_udc.h +++ b/drivers/usb/gadget/pxa27x_udc.h @@ -318,6 +318,11 @@ struct udc_usb_ep { * @queue: requests queue * @lock: lock to pxa_ep data (queues and stats) * @enabled: true when endpoint enabled (not stopped by gadget layer) + * @in_handle_ep: number of recursions of handle_ep() function + * Prevents deadlocks or infinite recursions of types : + * irq->handle_ep()->req_done()->req.complete()->pxa_ep_queue()->handle_ep() + * or + * pxa_ep_queue()->handle_ep()->req_done()->req.complete()->pxa_ep_queue() * @idx: endpoint index (1 => epA, 2 => epB, ..., 24 => epX) * @name: endpoint name (for trace/debug purpose) * @dir_in: 1 if IN endpoint, 0 if OUT endpoint @@ -346,6 +351,7 @@ struct pxa_ep { spinlock_t lock; /* Protects this structure */ /* (queues, stats) */ unsigned enabled:1; + unsigned in_handle_ep:1; unsigned idx:5; char *name; -- cgit v0.10.2 From 0ded2f146acfaf71e5f4c15b80cf89b3af48134c Mon Sep 17 00:00:00 2001 From: Cliff Cai Date: Thu, 28 Jan 2010 20:43:44 -0500 Subject: USB: musb: set version of Blackfin version All current Blackfin parts are using RTL v1.9, but they don't expose the hardware registers to probe this dynamically. So hardcode the version to v1.9 for now. Need to move the local hwvers related defines higher up in the header so that sub-musb headers may utilize them. Signed-off-by: Cliff Cai Signed-off-by: Mike Frysinger Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 74a55b9..17e7115 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -52,6 +52,15 @@ struct musb; struct musb_hw_ep; struct musb_ep; +/* Helper defines for struct musb->hwvers */ +#define MUSB_HWVERS_MAJOR(x) ((x >> 10) & 0x1f) +#define MUSB_HWVERS_MINOR(x) (x & 0x3ff) +#define MUSB_HWVERS_RC 0x8000 +#define MUSB_HWVERS_1300 0x52C +#define MUSB_HWVERS_1400 0x590 +#define MUSB_HWVERS_1800 0x720 +#define MUSB_HWVERS_1900 0x784 +#define MUSB_HWVERS_2000 0x800 #include "musb_debug.h" #include "musb_dma.h" @@ -322,13 +331,6 @@ struct musb { struct clk *clock; irqreturn_t (*isr)(int, void *); struct work_struct irq_work; -#define MUSB_HWVERS_MAJOR(x) ((x >> 10) & 0x1f) -#define MUSB_HWVERS_MINOR(x) (x & 0x3ff) -#define MUSB_HWVERS_RC 0x8000 -#define MUSB_HWVERS_1300 0x52C -#define MUSB_HWVERS_1400 0x590 -#define MUSB_HWVERS_1800 0x720 -#define MUSB_HWVERS_2000 0x800 u16 hwvers; /* this hub status bit is reserved by USB 2.0 and not seen by usbcore */ diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h index 895fb05..292894a 100644 --- a/drivers/usb/musb/musb_regs.h +++ b/drivers/usb/musb/musb_regs.h @@ -533,7 +533,11 @@ static inline u8 musb_read_configdata(void __iomem *mbase) static inline u16 musb_read_hwvers(void __iomem *mbase) { - return 0; + /* + * This register is invisible on Blackfin, actually the MUSB + * RTL version of Blackfin is 1.9, so just harcode its value. + */ + return MUSB_HWVERS_1900; } static inline void __iomem *musb_read_target_reg_base(u8 i, void __iomem *mbase) -- cgit v0.10.2 From 9f445cb29918dc488b7a9a92ef018599cce33df7 Mon Sep 17 00:00:00 2001 From: Cliff Cai Date: Thu, 28 Jan 2010 20:44:18 -0500 Subject: USB: musb: disable double buffering for older RTL versions Trying to use double buffer modes in RTL versions <2.0 may result in infinite hangs or data corruption. So avoid them with older versions. Signed-off-by: Cliff Cai Signed-off-by: Mike Frysinger Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index cbcf14a2..41de3a9 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -895,7 +895,14 @@ static int musb_gadget_enable(struct usb_ep *ep, /* REVISIT if can_bulk_split(), use by updating "tmp"; * likewise high bandwidth periodic tx */ - musb_writew(regs, MUSB_TXMAXP, tmp); + /* Set TXMAXP with the FIFO size of the endpoint + * to disable double buffering mode. Currently, It seems that double + * buffering has problem if musb RTL revision number < 2.0. + */ + if (musb->hwvers < MUSB_HWVERS_2000) + musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx); + else + musb_writew(regs, MUSB_TXMAXP, tmp); csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG; if (musb_readw(regs, MUSB_TXCSR) @@ -925,7 +932,13 @@ static int musb_gadget_enable(struct usb_ep *ep, /* REVISIT if can_bulk_combine() use by updating "tmp" * likewise high bandwidth periodic rx */ - musb_writew(regs, MUSB_RXMAXP, tmp); + /* Set RXMAXP with the FIFO size of the endpoint + * to disable double buffering mode. + */ + if (musb->hwvers < MUSB_HWVERS_2000) + musb_writew(regs, MUSB_RXMAXP, hw_ep->max_packet_sz_rx); + else + musb_writew(regs, MUSB_RXMAXP, tmp); /* force shared fifo to OUT-only mode */ if (hw_ep->is_shared_fifo) { diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index c3fdd6d..3421cf9 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -605,8 +605,14 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep) musb_writeb(ep->regs, MUSB_RXTYPE, qh->type_reg); musb_writeb(ep->regs, MUSB_RXINTERVAL, qh->intv_reg); /* NOTE: bulk combining rewrites high bits of maxpacket */ - musb_writew(ep->regs, MUSB_RXMAXP, - qh->maxpacket | ((qh->hb_mult - 1) << 11)); + /* Set RXMAXP with the FIFO size of the endpoint + * to disable double buffer mode. + */ + if (musb->hwvers < MUSB_HWVERS_2000) + musb_writew(ep->regs, MUSB_RXMAXP, ep->max_packet_sz_rx); + else + musb_writew(ep->regs, MUSB_RXMAXP, + qh->maxpacket | ((qh->hb_mult - 1) << 11)); ep->rx_reinit = 0; } -- cgit v0.10.2 From 7f1ee82695654faf0a93fc0abf3b08eb354ef1f6 Mon Sep 17 00:00:00 2001 From: Michal Nazarewicz Date: Thu, 28 Jan 2010 13:05:26 +0100 Subject: USB: mass_storage: eject LUNs on thread exit Adds a fallback which forces all LUNs ejection (including non-removable and with prevent_medium_removal flag) when mass storage function (MSF) worker thread exits and gadget fails to handle the situation. Previously, if thread_exits was not specified mass storage function (MSF) did nothing when exiting thread as it's unclear for *function* what to do when it's thread terminates so responsibility of handling this situation was left to the *gadget* using the function. The g_mass_storage handled the situation by unregistering itself (the same thing that file storage gadget does). However, g_multi did nothing and so MSF did not eject LUNs which prevented file system unmounting. Signed-off-by: Michal Nazarewicz Reviewed-by: Kyungmin Park Cc: David Brownell Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index a37640e..0a18d44 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -368,7 +368,7 @@ struct fsg_common { struct task_struct *thread_task; /* Callback function to call when thread exits. */ - void (*thread_exits)(struct fsg_common *common); + int (*thread_exits)(struct fsg_common *common); /* Gadget's private data. */ void *private_data; @@ -392,8 +392,12 @@ struct fsg_config { const char *lun_name_format; const char *thread_name; - /* Callback function to call when thread exits. */ - void (*thread_exits)(struct fsg_common *common); + /* Callback function to call when thread exits. If no + * callback is set or it returns value lower then zero MSF + * will force eject all LUNs it operates on (including those + * marked as non-removable or with prevent_medium_removal flag + * set). */ + int (*thread_exits)(struct fsg_common *common); /* Gadget's private data. */ void *private_data; @@ -2615,8 +2619,20 @@ static int fsg_main_thread(void *common_) common->thread_task = NULL; spin_unlock_irq(&common->lock); - if (common->thread_exits) - common->thread_exits(common); + if (!common->thread_exits || common->thread_exits(common) < 0) { + struct fsg_lun *curlun = common->luns; + unsigned i = common->nluns; + + down_write(&common->filesem); + for (; i--; ++curlun) { + if (!fsg_lun_is_open(curlun)) + continue; + + fsg_lun_close(curlun); + curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT; + } + up_write(&common->filesem); + } /* Let the unbind and cleanup routines know the thread has exited */ complete_and_exit(&common->thread_notifier, 0); diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c index 19619fb..705cc1f 100644 --- a/drivers/usb/gadget/mass_storage.c +++ b/drivers/usb/gadget/mass_storage.c @@ -135,6 +135,12 @@ FSG_MODULE_PARAMETERS(/* no prefix */, mod_data); static unsigned long msg_registered = 0; static void msg_cleanup(void); +static int msg_thread_exits(struct fsg_common *common) +{ + msg_cleanup(); + return 0; +} + static int __init msg_do_config(struct usb_configuration *c) { struct fsg_common *common; @@ -147,7 +153,7 @@ static int __init msg_do_config(struct usb_configuration *c) } fsg_config_from_params(&config, &mod_data); - config.thread_exits = (void(*)(struct fsg_common*))&msg_cleanup; + config.thread_exits = msg_thread_exits; common = fsg_common_init(0, c->cdev, &config); if (IS_ERR(common)) return PTR_ERR(common); -- cgit v0.10.2 From b00ce11f00c9e86442de000e8bd3dd42f089c8e1 Mon Sep 17 00:00:00 2001 From: Michal Nazarewicz Date: Wed, 27 Jan 2010 11:14:28 +0100 Subject: USB: g_mass_storage: superfluous and missing packets fixed The mass storage function responded needlessly to a set configuration packet. This was a leftover from converting gadget (file storage gadget) into a composite function. Moreover, it has failed to respond to get max LUN request. Adding request queueing made the function work better. Signed-off-by: Michal Nazarewicz Signed-off-by: Marek Szyprowski Cc: Alan Stern Cc: David Brownell Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index 0a18d44..3c83550 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -618,7 +618,12 @@ static int fsg_setup(struct usb_function *f, return -EDOM; VDBG(fsg, "get max LUN\n"); *(u8 *) req->buf = fsg->common->nluns - 1; - return 1; + + /* Respond with data/status */ + req->length = min(1, w_length); + fsg->common->ep0req_name = + ctrl->bRequestType & USB_DIR_IN ? "ep0-in" : "ep0-out"; + return ep0_queue(fsg->common); } VDBG(fsg, @@ -2528,14 +2533,6 @@ static void handle_exception(struct fsg_common *common) case FSG_STATE_CONFIG_CHANGE: rc = do_set_config(common, new_config); - if (common->ep0_req_tag != exception_req_tag) - break; - if (rc != 0) { /* STALL on errors */ - DBG(common, "ep0 set halt\n"); - usb_ep_set_halt(common->ep0); - } else { /* Complete the status stage */ - ep0_queue(common); - } break; case FSG_STATE_EXIT: -- cgit v0.10.2 From a79df50bbad3b58efb5f2c730ca20573a674de10 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 29 Jan 2010 20:38:59 +0000 Subject: usb: gadgetfs: Convert semaphore to mutex The semaphore data->lock is semantically a mutex. Convert it to a real mutex. Signed-off-by: Thomas Gleixner Cc: David Brownell Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index bf0f652..de8a838 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -194,7 +194,7 @@ enum ep_state { }; struct ep_data { - struct semaphore lock; + struct mutex lock; enum ep_state state; atomic_t count; struct dev_data *dev; @@ -298,10 +298,10 @@ get_ready_ep (unsigned f_flags, struct ep_data *epdata) int val; if (f_flags & O_NONBLOCK) { - if (down_trylock (&epdata->lock) != 0) + if (!mutex_trylock(&epdata->lock)) goto nonblock; if (epdata->state != STATE_EP_ENABLED) { - up (&epdata->lock); + mutex_unlock(&epdata->lock); nonblock: val = -EAGAIN; } else @@ -309,7 +309,8 @@ nonblock: return val; } - if ((val = down_interruptible (&epdata->lock)) < 0) + val = mutex_lock_interruptible(&epdata->lock); + if (val < 0) return val; switch (epdata->state) { @@ -323,7 +324,7 @@ nonblock: // FALLTHROUGH case STATE_EP_UNBOUND: /* clean disconnect */ val = -ENODEV; - up (&epdata->lock); + mutex_unlock(&epdata->lock); } return val; } @@ -393,7 +394,7 @@ ep_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr) if (likely (data->ep != NULL)) usb_ep_set_halt (data->ep); spin_unlock_irq (&data->dev->lock); - up (&data->lock); + mutex_unlock(&data->lock); return -EBADMSG; } @@ -411,7 +412,7 @@ ep_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr) value = -EFAULT; free1: - up (&data->lock); + mutex_unlock(&data->lock); kfree (kbuf); return value; } @@ -436,7 +437,7 @@ ep_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) if (likely (data->ep != NULL)) usb_ep_set_halt (data->ep); spin_unlock_irq (&data->dev->lock); - up (&data->lock); + mutex_unlock(&data->lock); return -EBADMSG; } @@ -455,7 +456,7 @@ ep_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) VDEBUG (data->dev, "%s write %zu IN, status %d\n", data->name, len, (int) value); free1: - up (&data->lock); + mutex_unlock(&data->lock); kfree (kbuf); return value; } @@ -466,7 +467,8 @@ ep_release (struct inode *inode, struct file *fd) struct ep_data *data = fd->private_data; int value; - if ((value = down_interruptible(&data->lock)) < 0) + value = mutex_lock_interruptible(&data->lock); + if (value < 0) return value; /* clean up if this can be reopened */ @@ -476,7 +478,7 @@ ep_release (struct inode *inode, struct file *fd) data->hs_desc.bDescriptorType = 0; usb_ep_disable(data->ep); } - up (&data->lock); + mutex_unlock(&data->lock); put_ep (data); return 0; } @@ -507,7 +509,7 @@ static long ep_ioctl(struct file *fd, unsigned code, unsigned long value) } else status = -ENODEV; spin_unlock_irq (&data->dev->lock); - up (&data->lock); + mutex_unlock(&data->lock); return status; } @@ -673,7 +675,7 @@ fail: value = -ENODEV; spin_unlock_irq(&epdata->dev->lock); - up(&epdata->lock); + mutex_unlock(&epdata->lock); if (unlikely(value)) { kfree(priv); @@ -765,7 +767,8 @@ ep_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) u32 tag; int value, length = len; - if ((value = down_interruptible (&data->lock)) < 0) + value = mutex_lock_interruptible(&data->lock); + if (value < 0) return value; if (data->state != STATE_EP_READY) { @@ -854,7 +857,7 @@ fail: data->desc.bDescriptorType = 0; data->hs_desc.bDescriptorType = 0; } - up (&data->lock); + mutex_unlock(&data->lock); return value; fail0: value = -EINVAL; @@ -870,7 +873,7 @@ ep_open (struct inode *inode, struct file *fd) struct ep_data *data = inode->i_private; int value = -EBUSY; - if (down_interruptible (&data->lock) != 0) + if (mutex_lock_interruptible(&data->lock) != 0) return -EINTR; spin_lock_irq (&data->dev->lock); if (data->dev->state == STATE_DEV_UNBOUND) @@ -885,7 +888,7 @@ ep_open (struct inode *inode, struct file *fd) DBG (data->dev, "%s state %d\n", data->name, data->state); spin_unlock_irq (&data->dev->lock); - up (&data->lock); + mutex_unlock(&data->lock); return value; } @@ -1631,7 +1634,7 @@ static int activate_ep_files (struct dev_data *dev) if (!data) goto enomem0; data->state = STATE_EP_DISABLED; - init_MUTEX (&data->lock); + mutex_init(&data->lock); init_waitqueue_head (&data->wait); strncpy (data->name, ep->name, sizeof (data->name) - 1); -- cgit v0.10.2 From bd09a9f5318d0a088605911325d6e6e8530bdc9a Mon Sep 17 00:00:00 2001 From: Alessio Igor Bogani Date: Tue, 2 Feb 2010 16:18:28 +0100 Subject: USB: ftdi_sio: Replace BKL with a mutex As Alan Cox have pinpointed the driver still required protection against parallels calls to the config ioctl(). If lock is still necessary the use of BKL is abused here. So replace BKL with a more convenient mutex. Signed-off-by: Alessio Igor Bogani Cc: Greg Kroah-Hartman Cc: Johan Hovold Cc: Alan Cox Cc: Daniel Mack Cc: Andrew Morton Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index dd5bfbc..8261299 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -33,12 +33,12 @@ #include #include #include -#include #include #include #include #include #include +#include #include #include #include @@ -92,6 +92,7 @@ struct ftdi_private { unsigned long tx_outstanding_bytes; unsigned long tx_outstanding_urbs; unsigned short max_packet_size; + struct mutex cfg_lock; /* Avoid mess by parallel calls of config ioctl() */ }; /* struct ftdi_sio_quirk is used by devices requiring special attention. */ @@ -1218,7 +1219,7 @@ static int set_serial_info(struct tty_struct *tty, if (copy_from_user(&new_serial, newinfo, sizeof(new_serial))) return -EFAULT; - lock_kernel(); + mutex_lock(&priv->cfg_lock); old_priv = *priv; /* Do error checking and permission checking */ @@ -1226,7 +1227,7 @@ static int set_serial_info(struct tty_struct *tty, if (!capable(CAP_SYS_ADMIN)) { if (((new_serial.flags & ~ASYNC_USR_MASK) != (priv->flags & ~ASYNC_USR_MASK))) { - unlock_kernel(); + mutex_unlock(&priv->cfg_lock); return -EPERM; } priv->flags = ((priv->flags & ~ASYNC_USR_MASK) | @@ -1237,7 +1238,7 @@ static int set_serial_info(struct tty_struct *tty, if ((new_serial.baud_base != priv->baud_base) && (new_serial.baud_base < 9600)) { - unlock_kernel(); + mutex_unlock(&priv->cfg_lock); return -EINVAL; } @@ -1267,11 +1268,11 @@ check_and_exit: (priv->flags & ASYNC_SPD_MASK)) || (((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) && (old_priv.custom_divisor != priv->custom_divisor))) { - unlock_kernel(); + mutex_unlock(&priv->cfg_lock); change_speed(tty, port); } else - unlock_kernel(); + mutex_unlock(&priv->cfg_lock); return 0; } /* set_serial_info */ @@ -1538,6 +1539,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) kref_init(&priv->kref); spin_lock_init(&priv->tx_lock); + mutex_init(&priv->cfg_lock); init_waitqueue_head(&priv->delta_msr_wait); priv->flags = ASYNC_LOW_LATENCY; -- cgit v0.10.2 From 9714080d20f2ec4b671a06ce69367d91fa9e227e Mon Sep 17 00:00:00 2001 From: Mitchell Solomon Date: Fri, 12 Feb 2010 13:23:18 -0500 Subject: USB: add new ftdi_sio device ids PID patch for my products Signed-off-by: Mitchell Solomon Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 8261299..d59262e 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -738,6 +738,10 @@ static struct usb_device_id id_table_combined [] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) }, { USB_DEVICE(FTDI_VID, HAMEG_HO870_PID) }, + { USB_DEVICE(FTDI_VID, MJSG_GENERIC_PID) }, + { USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) }, + { USB_DEVICE(FTDI_VID, MJSG_HD_RADIO_PID) }, + { USB_DEVICE(FTDI_VID, MJSG_XM_RADIO_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index f9efd97..612a788 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1002,3 +1002,11 @@ #define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/ #define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/ #define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */ + +/* + * MJS Gadgets HD Radio / XM Radio / Sirius Radio interfaces (using VID 0x0403) + */ +#define MJSG_GENERIC_PID 0x9378 +#define MJSG_SR_RADIO_PID 0x9379 +#define MJSG_XM_RADIO_PID 0x937A +#define MJSG_HD_RADIO_PID 0x937C -- cgit v0.10.2 From db8516f61b481e82cec398474ed716d926de7f94 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 2 Feb 2010 15:31:02 +0000 Subject: USB: isp1760: Flush the D-cache for the pipe-in transfer buffers When the HDC driver writes the data to the transfer buffers it pollutes the D-cache (unlike DMA drivers where the device writes the data). If the corresponding pages get mapped into user space, there are no additional cache flushing operations performed and this causes random user space faults on architectures with separate I and D caches (Harvard) or those with aliasing D-cache. Signed-off-by: Catalin Marinas Cc: Matthew Dharm Cc: Greg KH Cc: Sebastian Siewior Cc: Oliver Neukum Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index 27b8f7c..9f01293 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -17,7 +17,9 @@ #include #include #include +#include #include +#include #include "../core/hcd.h" #include "isp1760-hcd.h" @@ -904,6 +906,14 @@ __acquires(priv->lock) status = 0; } + if (usb_pipein(urb->pipe) && usb_pipetype(urb->pipe) != PIPE_CONTROL) { + void *ptr; + for (ptr = urb->transfer_buffer; + ptr < urb->transfer_buffer + urb->transfer_buffer_length; + ptr += PAGE_SIZE) + flush_dcache_page(virt_to_page(ptr)); + } + /* complete() can reenter this HCD */ usb_hcd_unlink_urb_from_ep(priv_to_hcd(priv), urb); spin_unlock(&priv->lock); -- cgit v0.10.2 From 08e6c972da616d057b63fd3f89ce0eb539952f06 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 2 Feb 2010 14:47:17 -0800 Subject: USB: musb: test always evaluates to false The removed part always evaluates to false. Signed-off-by: Roel Kluin Cc: Felipe Balbi Cc: Greg Kroah-Hartman Acked-by: David Brownell Signed-off-by: Andrew Morton diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 41de3a9..a9f288c 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1710,8 +1710,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) return -EINVAL; /* driver must be initialized to support peripheral mode */ - if (!musb || !(musb->board_mode == MUSB_OTG - || musb->board_mode != MUSB_OTG)) { + if (!musb) { DBG(1, "%s, no dev??\n", __func__); return -ENODEV; } -- cgit v0.10.2 From d7e18a9f2c506467ec7a9c066da45a0f60c6f5a6 Mon Sep 17 00:00:00 2001 From: Michal Nazarewicz Date: Wed, 3 Feb 2010 11:37:17 +0100 Subject: USB: g_mass_storage: min(...) warning fixed This patch fixes warning caused by calling min() macro with arguments of different types: drivers/usb/gadget/f_mass_storage.c:623: warning: \ comparison of distinct pointer types lacks a cast Reported-by: Stephen Rothwell Signed-off-by: Michal Nazarewicz Cc: Marek Szyprowski Cc: Kyungmin Park Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index 3c83550..0553d9a 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -620,7 +620,7 @@ static int fsg_setup(struct usb_function *f, *(u8 *) req->buf = fsg->common->nluns - 1; /* Respond with data/status */ - req->length = min(1, w_length); + req->length = min((u16)1, w_length); fsg->common->ep0req_name = ctrl->bRequestType & USB_DIR_IN ? "ep0-in" : "ep0-out"; return ep0_queue(fsg->common); -- cgit v0.10.2 From 2b626dc134d38d0001b98acf8c7293b6bc5ee86d Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 3 Feb 2010 17:10:22 +0100 Subject: USB: cdc-acm: fix possible deadlock with multiple openers The lock must be dropped before usb_autopm_interface_put() is called Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 5155ff2..b97f930 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -553,7 +553,7 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) acm = acm_table[tty->index]; if (!acm || !acm->dev) - goto err_out; + goto out; else rv = 0; @@ -569,8 +569,9 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) mutex_lock(&acm->mutex); if (acm->port.count++) { + mutex_unlock(&acm->mutex); usb_autopm_put_interface(acm->control); - goto done; + goto out; } acm->ctrlurb->dev = acm->dev; @@ -599,18 +600,18 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) set_bit(ASYNCB_INITIALIZED, &acm->port.flags); rv = tty_port_block_til_ready(&acm->port, tty, filp); tasklet_schedule(&acm->urb_task); -done: + mutex_unlock(&acm->mutex); -err_out: +out: mutex_unlock(&open_mutex); return rv; full_bailout: usb_kill_urb(acm->ctrlurb); bail_out: - usb_autopm_put_interface(acm->control); acm->port.count--; mutex_unlock(&acm->mutex); + usb_autopm_put_interface(acm->control); early_bail: mutex_unlock(&open_mutex); tty_port_tty_set(&acm->port, NULL); -- cgit v0.10.2 From 8e7e61dfbf1ec6418bf89505980b158a8d00d877 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Thu, 4 Feb 2010 17:15:25 +0100 Subject: USB: f_mass_storage: fix crash on bind() error init_completion() hasn't been called yet and the thread isn't created if we end up here, so don't call complete() on thread_notifier. Signed-off-by: Peter Korsgaard Acked-by: Michal Nazarewicz Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index 0553d9a..e6abde3 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -2865,7 +2865,6 @@ error_release: /* Call fsg_common_release() directly, ref might be not * initialised */ fsg_common_release(&common->ref); - complete(&common->thread_notifier); return ERR_PTR(rc); } -- cgit v0.10.2 From 90f7976880bbbf9968629500972f8e2f80401217 Mon Sep 17 00:00:00 2001 From: Christoph Egger Date: Fri, 5 Feb 2010 13:24:12 +0100 Subject: USB: Remove unsupported usb gadget drivers A bunch of USB gadget drivers where never ported from the linux 2.4 series to 2.6 kernels. However there's some code still in the tree for them which isn't used and is probably untested for ages. As the chance of these drivers being forward ported is probably quite small now it might be time to get rid of them. Signed-off-by: Christoph Egger Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c index 949ebe5e..65a5f94 100644 --- a/drivers/usb/gadget/epautoconf.c +++ b/drivers/usb/gadget/epautoconf.c @@ -265,17 +265,6 @@ struct usb_ep * __init usb_ep_autoconfig ( return ep; } - } else if (gadget_is_sh (gadget) && USB_ENDPOINT_XFER_INT == type) { - /* single buffering is enough; maybe 8 byte fifo is too */ - ep = find_ep (gadget, "ep3in-bulk"); - if (ep && ep_matches (gadget, ep, desc)) - return ep; - - } else if (gadget_is_mq11xx (gadget) && USB_ENDPOINT_XFER_INT == type) { - ep = find_ep (gadget, "ep1-bulk"); - if (ep && ep_matches (gadget, ep, desc)) - return ep; - #ifdef CONFIG_BLACKFIN } else if (gadget_is_musbhsfc(gadget) || gadget_is_musbhdrc(gadget)) { if ((USB_ENDPOINT_XFER_BULK == type) || diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c index d10353d..e49c732 100644 --- a/drivers/usb/gadget/f_acm.c +++ b/drivers/usb/gadget/f_acm.c @@ -702,14 +702,6 @@ acm_unbind(struct usb_configuration *c, struct usb_function *f) /* Some controllers can't support CDC ACM ... */ static inline bool can_support_cdc(struct usb_configuration *c) { - /* SH3 doesn't support multiple interfaces */ - if (gadget_is_sh(c->cdev->gadget)) - return false; - - /* sa1100 doesn't have a third interrupt endpoint */ - if (gadget_is_sa1100(c->cdev->gadget)) - return false; - /* everything else is *probably* fine ... */ return true; } diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c index ecf5bdd..2fff530 100644 --- a/drivers/usb/gadget/f_ecm.c +++ b/drivers/usb/gadget/f_ecm.c @@ -497,12 +497,9 @@ static int ecm_set_alt(struct usb_function *f, unsigned intf, unsigned alt) struct net_device *net; /* Enable zlps by default for ECM conformance; - * override for musb_hdrc (avoids txdma ovhead) - * and sa1100 (can't). + * override for musb_hdrc (avoids txdma ovhead). */ - ecm->port.is_zlp_ok = !( - gadget_is_sa1100(cdev->gadget) - || gadget_is_musbhdrc(cdev->gadget) + ecm->port.is_zlp_ok = !(gadget_is_musbhdrc(cdev->gadget) ); ecm->port.cdc_filter = DEFAULT_FILTER; DBG(cdev, "activate ecm\n"); diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index e6abde3..b1935fe 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -2776,10 +2776,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common, if (cfg->release != 0xffff) { i = cfg->release; } else { - /* The sa1100 controller is not supported */ - i = gadget_is_sa1100(gadget) - ? -1 - : usb_gadget_controller_number(gadget); + i = usb_gadget_controller_number(gadget); if (i >= 0) { i = 0x0300 + i; } else { @@ -2804,8 +2801,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common, * disable stalls. */ common->can_stall = cfg->can_stall && - !(gadget_is_sh(common->gadget) || - gadget_is_at91(common->gadget)); + !(gadget_is_at91(common->gadget)); spin_lock_init(&common->lock); diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c index 95dae4c..a30e60c 100644 --- a/drivers/usb/gadget/f_rndis.c +++ b/drivers/usb/gadget/f_rndis.c @@ -769,10 +769,6 @@ rndis_unbind(struct usb_configuration *c, struct usb_function *f) /* Some controllers can't support RNDIS ... */ static inline bool can_support_rndis(struct usb_configuration *c) { - /* only two endpoints on sa1100 */ - if (gadget_is_sa1100(c->cdev->gadget)) - return false; - /* everything else is *presumably* fine */ return true; } diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index 29dfb02..a90dd2d 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -3208,15 +3208,11 @@ static int __init check_parameters(struct fsg_dev *fsg) * halt bulk endpoints correctly. If one of them is present, * disable stalls. */ - if (gadget_is_sh(fsg->gadget) || gadget_is_at91(fsg->gadget)) + if (gadget_is_at91(fsg->gadget)) mod_data.can_stall = 0; if (mod_data.release == 0xffff) { // Parameter wasn't set - /* The sa1100 controller is not supported */ - if (gadget_is_sa1100(fsg->gadget)) - gcnum = -1; - else - gcnum = usb_gadget_controller_number(fsg->gadget); + gcnum = usb_gadget_controller_number(fsg->gadget); if (gcnum >= 0) mod_data.release = 0x0300 + gcnum; else { diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h index f2d270b..1edbc12 100644 --- a/drivers/usb/gadget/gadget_chips.h +++ b/drivers/usb/gadget/gadget_chips.h @@ -45,46 +45,18 @@ #define gadget_is_goku(g) 0 #endif -/* SH3 UDC -- not yet ported 2.4 --> 2.6 */ -#ifdef CONFIG_USB_GADGET_SUPERH -#define gadget_is_sh(g) !strcmp("sh_udc", (g)->name) -#else -#define gadget_is_sh(g) 0 -#endif - -/* not yet stable on 2.6 (would help "original Zaurus") */ -#ifdef CONFIG_USB_GADGET_SA1100 -#define gadget_is_sa1100(g) !strcmp("sa1100_udc", (g)->name) -#else -#define gadget_is_sa1100(g) 0 -#endif - #ifdef CONFIG_USB_GADGET_LH7A40X #define gadget_is_lh7a40x(g) !strcmp("lh7a40x_udc", (g)->name) #else #define gadget_is_lh7a40x(g) 0 #endif -/* handhelds.org tree (?) */ -#ifdef CONFIG_USB_GADGET_MQ11XX -#define gadget_is_mq11xx(g) !strcmp("mq11xx_udc", (g)->name) -#else -#define gadget_is_mq11xx(g) 0 -#endif - #ifdef CONFIG_USB_GADGET_OMAP #define gadget_is_omap(g) !strcmp("omap_udc", (g)->name) #else #define gadget_is_omap(g) 0 #endif -/* not yet ported 2.4 --> 2.6 */ -#ifdef CONFIG_USB_GADGET_N9604 -#define gadget_is_n9604(g) !strcmp("n9604_udc", (g)->name) -#else -#define gadget_is_n9604(g) 0 -#endif - /* various unstable versions available */ #ifdef CONFIG_USB_GADGET_PXA27X #define gadget_is_pxa27x(g) !strcmp("pxa27x_udc", (g)->name) @@ -122,14 +94,6 @@ #define gadget_is_fsl_usb2(g) 0 #endif -/* Mentor high speed function controller */ -/* from Montavista kernel (?) */ -#ifdef CONFIG_USB_GADGET_MUSBHSFC -#define gadget_is_musbhsfc(g) !strcmp("musbhsfc_udc", (g)->name) -#else -#define gadget_is_musbhsfc(g) 0 -#endif - /* Mentor high speed "dual role" controller, in peripheral role */ #ifdef CONFIG_USB_GADGET_MUSB_HDRC #define gadget_is_musbhdrc(g) !strcmp("musb_hdrc", (g)->name) @@ -143,13 +107,6 @@ #define gadget_is_langwell(g) 0 #endif -/* from Montavista kernel (?) */ -#ifdef CONFIG_USB_GADGET_MPC8272 -#define gadget_is_mpc8272(g) !strcmp("mpc8272_udc", (g)->name) -#else -#define gadget_is_mpc8272(g) 0 -#endif - #ifdef CONFIG_USB_GADGET_M66592 #define gadget_is_m66592(g) !strcmp("m66592_udc", (g)->name) #else @@ -203,20 +160,12 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget) return 0x02; else if (gadget_is_pxa(gadget)) return 0x03; - else if (gadget_is_sh(gadget)) - return 0x04; - else if (gadget_is_sa1100(gadget)) - return 0x05; else if (gadget_is_goku(gadget)) return 0x06; - else if (gadget_is_mq11xx(gadget)) - return 0x07; else if (gadget_is_omap(gadget)) return 0x08; else if (gadget_is_lh7a40x(gadget)) return 0x09; - else if (gadget_is_n9604(gadget)) - return 0x10; else if (gadget_is_pxa27x(gadget)) return 0x11; else if (gadget_is_s3c2410(gadget)) @@ -225,12 +174,8 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget) return 0x13; else if (gadget_is_imx(gadget)) return 0x14; - else if (gadget_is_musbhsfc(gadget)) - return 0x15; else if (gadget_is_musbhdrc(gadget)) return 0x16; - else if (gadget_is_mpc8272(gadget)) - return 0x17; else if (gadget_is_atmel_usba(gadget)) return 0x18; else if (gadget_is_fsl_usb2(gadget)) @@ -265,10 +210,6 @@ static inline bool gadget_supports_altsettings(struct usb_gadget *gadget) if (gadget_is_pxa27x(gadget)) return false; - /* SH3 hardware just doesn't do altsettings */ - if (gadget_is_sh(gadget)) - return false; - /* Everything else is *presumably* fine ... */ return true; } diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c index 5f6a2e0..04f6224 100644 --- a/drivers/usb/gadget/gmidi.c +++ b/drivers/usb/gadget/gmidi.c @@ -618,11 +618,6 @@ gmidi_set_config(struct gmidi_device *dev, unsigned number, gfp_t gfp_flags) } #endif - if (gadget_is_sa1100(gadget) && dev->config) { - /* tx fifo is full, but we can't clear it...*/ - ERROR(dev, "can't change configurations\n"); - return -ESPIPE; - } gmidi_reset_config(dev); switch (number) { diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index 2d867fd..6b8bf8c 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -949,12 +949,6 @@ printer_set_config(struct printer_dev *dev, unsigned number) int result = 0; struct usb_gadget *gadget = dev->gadget; - if (gadget_is_sa1100(gadget) && dev->config) { - /* tx fifo is full, but we can't clear it...*/ - INFO(dev, "can't change configurations\n"); - return -ESPIPE; - } - switch (number) { case DEV_CONFIG_VALUE: result = 0; @@ -1033,12 +1027,6 @@ set_interface(struct printer_dev *dev, unsigned number) { int result = 0; - if (gadget_is_sa1100(dev->gadget) && dev->interface < 0) { - /* tx fifo is full, but we can't clear it...*/ - INFO(dev, "can't change interfaces\n"); - return -ESPIPE; - } - /* Free the current interface */ switch (dev->interface) { case PRINTER_INTERFACE: @@ -1392,12 +1380,6 @@ printer_bind(struct usb_gadget *gadget) goto fail; } - if (gadget_is_sa1100(gadget)) { - /* hardware can't write zero length packets. */ - ERROR(dev, "SA1100 controller is unsupport by this driver\n"); - goto fail; - } - gcnum = usb_gadget_controller_number(gadget); if (gcnum >= 0) { device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum); diff --git a/drivers/usb/gadget/u_ether.h b/drivers/usb/gadget/u_ether.h index fd55f45..3c8c0c9 100644 --- a/drivers/usb/gadget/u_ether.h +++ b/drivers/usb/gadget/u_ether.h @@ -93,13 +93,6 @@ static inline bool can_support_ecm(struct usb_gadget *gadget) if (!gadget_supports_altsettings(gadget)) return false; - /* SA1100 can do ECM, *without* status endpoint ... but we'll - * only use it in non-ECM mode for backwards compatibility - * (and since we currently require a status endpoint) - */ - if (gadget_is_sa1100(gadget)) - return false; - /* Everything else is *presumably* fine ... but this is a bit * chancy, so be **CERTAIN** there are no hardware issues with * your controller. Add it above if it can't handle CDC. diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index 2d77240..fac81ee 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -297,12 +297,10 @@ static int __init zero_bind(struct usb_composite_dev *cdev) */ if (loopdefault) { loopback_add(cdev, autoresume != 0); - if (!gadget_is_sh(gadget)) - sourcesink_add(cdev, autoresume != 0); + sourcesink_add(cdev, autoresume != 0); } else { sourcesink_add(cdev, autoresume != 0); - if (!gadget_is_sh(gadget)) - loopback_add(cdev, autoresume != 0); + loopback_add(cdev, autoresume != 0); } gcnum = usb_gadget_controller_number(gadget); -- cgit v0.10.2 From 640e95abdfae9fef5949084c92e80c8f2f8b5ec5 Mon Sep 17 00:00:00 2001 From: Eirik Aanonsen Date: Fri, 5 Feb 2010 09:49:25 +0100 Subject: USB: atmel uaba: Adding invert vbus_pin Adding vbus_pin_inverted so that the usb detect pin can be active high or low depending on HW implementation also replaced the gpio_get_value(udc->vbus_pin); with a call to vbus_is_present(udc); This allows the driver to be loaded and save about 0,15W on the consumption. Signed-off-by: Eirik Aanonsen Signed-off-by: Greg Kroah-Hartman diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index b13d187..3a4bc1a 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -1770,10 +1770,13 @@ at32_add_device_usba(unsigned int id, struct usba_platform_data *data) ARRAY_SIZE(usba0_resource))) goto out_free_pdev; - if (data) + if (data) { usba_data.pdata.vbus_pin = data->vbus_pin; - else + usba_data.pdata.vbus_pin_inverted = data->vbus_pin_inverted; + } else { usba_data.pdata.vbus_pin = -EINVAL; + usba_data.pdata.vbus_pin_inverted = -EINVAL; + } data = &usba_data.pdata; data->num_ep = ARRAY_SIZE(at32_usba_ep); diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index 976822f..f79bdfe 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -320,7 +320,7 @@ static inline void usba_cleanup_debugfs(struct usba_udc *udc) static int vbus_is_present(struct usba_udc *udc) { if (gpio_is_valid(udc->vbus_pin)) - return gpio_get_value(udc->vbus_pin); + return gpio_get_value(udc->vbus_pin) ^ udc->vbus_pin_inverted; /* No Vbus detection: Assume always present */ return 1; @@ -1763,7 +1763,7 @@ static irqreturn_t usba_vbus_irq(int irq, void *devid) if (!udc->driver) goto out; - vbus = gpio_get_value(udc->vbus_pin); + vbus = vbus_is_present(udc); if (vbus != udc->vbus_prev) { if (vbus) { toggle_bias(1); @@ -2000,6 +2000,7 @@ static int __init usba_udc_probe(struct platform_device *pdev) if (gpio_is_valid(pdata->vbus_pin)) { if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) { udc->vbus_pin = pdata->vbus_pin; + udc->vbus_pin_inverted = pdata->vbus_pin_inverted; ret = request_irq(gpio_to_irq(udc->vbus_pin), usba_vbus_irq, 0, diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h index f7baea3..88a2e07 100644 --- a/drivers/usb/gadget/atmel_usba_udc.h +++ b/drivers/usb/gadget/atmel_usba_udc.h @@ -323,6 +323,7 @@ struct usba_udc { struct platform_device *pdev; int irq; int vbus_pin; + int vbus_pin_inverted; struct clk *pclk; struct clk *hclk; diff --git a/include/linux/usb/atmel_usba_udc.h b/include/linux/usb/atmel_usba_udc.h index 6311fa2..baf41c8 100644 --- a/include/linux/usb/atmel_usba_udc.h +++ b/include/linux/usb/atmel_usba_udc.h @@ -15,6 +15,7 @@ struct usba_ep_data { struct usba_platform_data { int vbus_pin; + int vbus_pin_inverted; int num_ep; struct usba_ep_data ep[0]; }; -- cgit v0.10.2 From 5272098365514ab232fa6a695d58c3961fec6b7a Mon Sep 17 00:00:00 2001 From: Forest Bond Date: Fri, 5 Feb 2010 11:30:28 -0500 Subject: USB: serial: Add support for ViVOtech ViVOpay devices. Add support for USB serial interface provided by ViVOtech ViVOpay devices via new driver vivopay-serial. Currently only the ViVOpay 8800 device is supported, but support for similar devices can be added by adding the appropriate device IDs to the driver. Signed-off-by: Forest Bond Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index c480ea4..d9f289c 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -600,6 +600,14 @@ config USB_SERIAL_OPTICON To compile this driver as a module, choose M here: the module will be called opticon. +config USB_SERIAL_VIVOPAY_SERIAL + tristate "USB ViVOpay serial interface driver" + help + Say Y here if you want to use a ViVOtech ViVOpay USB device. + + To compile this driver as a module, choose M here: the + module will be called vivopay-serial. + config USB_SERIAL_DEBUG tristate "USB Debugging Device" help diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index 66619be..108c7d8 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -55,4 +55,5 @@ obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o obj-$(CONFIG_USB_SERIAL_VISOR) += visor.o obj-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat.o obj-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda.o +obj-$(CONFIG_USB_SERIAL_VIVOPAY_SERIAL) += vivopay-serial.o diff --git a/drivers/usb/serial/vivopay-serial.c b/drivers/usb/serial/vivopay-serial.c new file mode 100644 index 0000000..f719d00 --- /dev/null +++ b/drivers/usb/serial/vivopay-serial.c @@ -0,0 +1,76 @@ +/* + * Copyright (C) 2001-2005 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 2009 Outpost Embedded, LLC + */ + +#include +#include +#include +#include +#include +#include + + +#define DRIVER_VERSION "v1.0" +#define DRIVER_DESC "ViVOpay USB Serial Driver" + +#define VIVOPAY_VENDOR_ID 0x1d5f + + +static struct usb_device_id id_table [] = { + /* ViVOpay 8800 */ + { USB_DEVICE(VIVOPAY_VENDOR_ID, 0x1004) }, + { }, +}; + +MODULE_DEVICE_TABLE(usb, id_table); + +static struct usb_driver vivopay_serial_driver = { + .name = "vivopay-serial", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table, + .no_dynamic_id = 1, +}; + +static struct usb_serial_driver vivopay_serial_device = { + .driver = { + .owner = THIS_MODULE, + .name = "vivopay-serial", + }, + .id_table = id_table, + .usb_driver = &vivopay_serial_driver, + .num_ports = 1, +}; + +static int __init vivopay_serial_init(void) +{ + int retval; + retval = usb_serial_register(&vivopay_serial_device); + if (retval) + goto failed_usb_serial_register; + retval = usb_register(&vivopay_serial_driver); + if (retval) + goto failed_usb_register; + printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" + DRIVER_DESC "\n"); + return 0; +failed_usb_register: + usb_serial_deregister(&vivopay_serial_device); +failed_usb_serial_register: + return retval; +} + +static void __exit vivopay_serial_exit(void) +{ + usb_deregister(&vivopay_serial_driver); + usb_serial_deregister(&vivopay_serial_device); +} + +module_init(vivopay_serial_init); +module_exit(vivopay_serial_exit); + +MODULE_AUTHOR("Forest Bond "); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_VERSION(DRIVER_VERSION); +MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 815e173e1d71742f1135fb4d4931e8115a3ca0ef Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Fri, 5 Feb 2010 11:49:05 -0600 Subject: USB: ehci-dbgp: split PID register updates for IN and OUT pipes This patch addresses two problems: 1) Bulk reads should always use the DATA0 for the pid, and the write PID should toggle between DATA0 and DATA1. The fix is using dbgp_pid_write_update() and dbgp_pid_read_update(). 2) The delay loop for waiting for a transaction was not long enough to always complete the initial handshake inside dbgp_wait_until_done(). After the initial handshake the maximum delay length is never reached. The combined result of these two changes allows for the removal of the forced resynchronization where a bulk write was issued with a dummy data payload only to get the device to start accepting data writes again. CC: Eric Biederman CC: Yinghai Lu Signed-off-by: Jason Wessel Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c index 2958a12..6e98a36 100644 --- a/drivers/usb/early/ehci-dbgp.c +++ b/drivers/usb/early/ehci-dbgp.c @@ -66,8 +66,6 @@ static struct ehci_dev ehci_dev; #define USB_DEBUG_DEVNUM 127 -#define DBGP_DATA_TOGGLE 0x8800 - #ifdef DBGP_DEBUG #define dbgp_printk printk static void dbgp_ehci_status(char *str) @@ -88,11 +86,6 @@ static inline void dbgp_ehci_status(char *str) { } static inline void dbgp_printk(const char *fmt, ...) { } #endif -static inline u32 dbgp_pid_update(u32 x, u32 tok) -{ - return ((x ^ DBGP_DATA_TOGGLE) & 0xffff00) | (tok & 0xff); -} - static inline u32 dbgp_len_update(u32 x, u32 len) { return (x & ~0x0f) | (len & 0x0f); @@ -136,6 +129,19 @@ static inline u32 dbgp_len_update(u32 x, u32 len) #define DBGP_MAX_PACKET 8 #define DBGP_TIMEOUT (250 * 1000) +#define DBGP_LOOPS 1000 + +static inline u32 dbgp_pid_write_update(u32 x, u32 tok) +{ + static int data0 = USB_PID_DATA1; + data0 ^= USB_PID_DATA_TOGGLE; + return (x & 0xffff0000) | (data0 << 8) | (tok & 0xff); +} + +static inline u32 dbgp_pid_read_update(u32 x, u32 tok) +{ + return (x & 0xffff0000) | (USB_PID_DATA0 << 8) | (tok & 0xff); +} static int dbgp_wait_until_complete(void) { @@ -180,7 +186,7 @@ static int dbgp_wait_until_done(unsigned ctrl) { u32 pids, lpid; int ret; - int loop = 3; + int loop = DBGP_LOOPS; retry: writel(ctrl | DBGP_GO, &ehci_debug->control); @@ -197,6 +203,8 @@ retry: */ if (ret == -DBGP_TIMEOUT && !dbgp_not_safe) dbgp_not_safe = 1; + if (ret == -DBGP_ERR_BAD && --loop > 0) + goto retry; return ret; } @@ -245,12 +253,20 @@ static inline void dbgp_get_data(void *buf, int size) bytes[i] = (hi >> (8*(i - 4))) & 0xff; } -static int dbgp_out(u32 addr, const char *bytes, int size) +static int dbgp_bulk_write(unsigned devnum, unsigned endpoint, + const char *bytes, int size) { + int ret; + u32 addr; u32 pids, ctrl; + if (size > DBGP_MAX_PACKET) + return -1; + + addr = DBGP_EPADDR(devnum, endpoint); + pids = readl(&ehci_debug->pids); - pids = dbgp_pid_update(pids, USB_PID_OUT); + pids = dbgp_pid_write_update(pids, USB_PID_OUT); ctrl = readl(&ehci_debug->control); ctrl = dbgp_len_update(ctrl, size); @@ -260,34 +276,7 @@ static int dbgp_out(u32 addr, const char *bytes, int size) dbgp_set_data(bytes, size); writel(addr, &ehci_debug->address); writel(pids, &ehci_debug->pids); - return dbgp_wait_until_done(ctrl); -} - -static int dbgp_bulk_write(unsigned devnum, unsigned endpoint, - const char *bytes, int size) -{ - int ret; - int loops = 5; - u32 addr; - if (size > DBGP_MAX_PACKET) - return -1; - - addr = DBGP_EPADDR(devnum, endpoint); -try_again: - if (loops--) { - ret = dbgp_out(addr, bytes, size); - if (ret == -DBGP_ERR_BAD) { - int try_loops = 3; - do { - /* Emit a dummy packet to re-sync communication - * with the debug device */ - if (dbgp_out(addr, "12345678", 8) >= 0) { - udelay(2); - goto try_again; - } - } while (try_loops--); - } - } + ret = dbgp_wait_until_done(ctrl); return ret; } @@ -304,7 +293,7 @@ static int dbgp_bulk_read(unsigned devnum, unsigned endpoint, void *data, addr = DBGP_EPADDR(devnum, endpoint); pids = readl(&ehci_debug->pids); - pids = dbgp_pid_update(pids, USB_PID_IN); + pids = dbgp_pid_read_update(pids, USB_PID_IN); ctrl = readl(&ehci_debug->control); ctrl = dbgp_len_update(ctrl, size); @@ -362,7 +351,6 @@ static int dbgp_control_msg(unsigned devnum, int requesttype, return dbgp_bulk_read(devnum, 0, data, size); } - /* Find a PCI capability */ static u32 __init find_cap(u32 num, u32 slot, u32 func, int cap) { -- cgit v0.10.2 From 759f3634267a67ac90f3fa7fc06510dfd43b4e45 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 5 Feb 2010 16:50:08 -0800 Subject: USB: serial: Remove unnecessary \n's from dbg uses #define dbg adds the newline, messages shouldn't. Converted dbg("%s", "some string") to dbg("some string") Signed-off-by: Joe Perches Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 61e15ef..e2600e7 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -612,7 +612,7 @@ static void cp210x_set_termios(struct tty_struct *tty, baud); if (cp210x_set_config_single(port, CP210X_SET_BAUDDIV, ((BAUD_RATE_GEN_FREQ + baud/2) / baud))) { - dbg("Baud rate requested not supported by device\n"); + dbg("Baud rate requested not supported by device"); baud = tty_termios_baud_rate(old_termios); } } diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 23c8bd6..036f999 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -391,7 +391,7 @@ static void cyberjack_read_bulk_callback(struct urb *urb) tty = tty_port_tty_get(&port->port); if (!tty) { - dbg("%s - ignoring since device not open\n", __func__); + dbg("%s - ignoring since device not open", __func__); return; } if (urb->actual_length) { diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index d59262e..1c84355 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1836,7 +1836,7 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port, spin_lock_irqsave(&priv->tx_lock, flags); if (priv->tx_outstanding_urbs > URB_UPPER_LIMIT) { spin_unlock_irqrestore(&priv->tx_lock, flags); - dbg("%s - write limit hit\n", __func__); + dbg("%s - write limit hit", __func__); return 0; } priv->tx_outstanding_urbs++; diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 0b1c473..5288203 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -194,7 +194,7 @@ static int usb_serial_multi_urb_write(struct tty_struct *tty, if (port->urbs_in_flight > port->serial->type->max_in_flight_urbs) { spin_unlock_irqrestore(&port->lock, flags); - dbg("%s - write limit hit\n", __func__); + dbg("%s - write limit hit", __func__); return bwrite; } port->tx_bytes_flight += towrite; diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index c055c8b..66fb58f 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -1971,7 +1971,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial, return; case IOSP_EXT_STATUS_RX_CHECK_RSP: - dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", __func__, edge_serial->rxPort, byte3); + dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============", __func__, edge_serial->rxPort, byte3); /* Port->RxCheckRsp = true; */ return; } @@ -2039,7 +2039,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial, break; default: - dbg("%s - Unrecognized IOSP status code %u\n", __func__, code); + dbg("%s - Unrecognized IOSP status code %u", __func__, code); break; } return; @@ -2494,7 +2494,7 @@ static int calc_baud_rate_divisor(int baudrate, int *divisor) *divisor = custom; - dbg("%s - Baud %d = %d\n", __func__, baudrate, custom); + dbg("%s - Baud %d = %d", __func__, baudrate, custom); return 0; } @@ -2879,7 +2879,7 @@ static void load_application_firmware(struct edgeport_serial *edge_serial) break; case EDGE_DOWNLOAD_FILE_NONE: - dbg ("No download file specified, skipping download\n"); + dbg("No download file specified, skipping download"); return; default: diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 8f0aa64..98e5045 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -1716,7 +1716,7 @@ static void edge_interrupt_callback(struct urb *urb) case TIUMP_INTERRUPT_CODE_MSR: /* MSR */ /* Copy MSR from UMP */ msr = data[1]; - dbg("%s - ===== Port %u MSR Status = %02x ======\n", + dbg("%s - ===== Port %u MSR Status = %02x ======", __func__, port_number, msr); handle_new_msr(edge_port, msr); break; diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index e0aa031..546b29f 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -109,7 +109,7 @@ static void mos7720_interrupt_callback(struct urb *urb) __u8 sp1; __u8 sp2; - dbg("%s", " : Entering\n"); + dbg(" : Entering"); switch (status) { case 0: @@ -278,7 +278,7 @@ static void mos7720_bulk_in_callback(struct urb *urb) mos7720_port = urb->context; if (!mos7720_port) { - dbg("%s", "NULL mos7720_port pointer \n"); + dbg("NULL mos7720_port pointer"); return ; } @@ -386,7 +386,7 @@ static int send_mos_cmd(struct usb_serial *serial, __u8 request, __u16 value, } out: if (status < 0) - dbg("Command Write failed Value %x index %x\n", value, index); + dbg("Command Write failed Value %x index %x", value, index); return status; } @@ -491,7 +491,7 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port) */ port_number = port->number - port->serial->minor; send_mos_cmd(port->serial, MOS_READ, port_number, UART_LSR, &data); - dbg("SS::%p LSR:%x\n", mos7720_port, data); + dbg("SS::%p LSR:%x", mos7720_port, data); dbg("Check:Sending Command .........."); @@ -830,7 +830,7 @@ static void mos7720_throttle(struct tty_struct *tty) struct moschip_port *mos7720_port; int status; - dbg("%s- port %d\n", __func__, port->number); + dbg("%s- port %d", __func__, port->number); mos7720_port = usb_get_serial_port_data(port); @@ -1309,7 +1309,7 @@ static void mos7720_set_termios(struct tty_struct *tty, return; } - dbg("%s\n", "setting termios - ASPIRE"); + dbg("setting termios - ASPIRE"); cflag = tty->termios->c_cflag; @@ -1327,7 +1327,7 @@ static void mos7720_set_termios(struct tty_struct *tty, change_port_settings(tty, mos7720_port, old_termios); if (!port->read_urb) { - dbg("%s", "URB KILLED !!!!!\n"); + dbg("URB KILLED !!!!!"); return; } diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 38762a0..7793c4a 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -332,7 +332,7 @@ static void omninet_write_bulk_callback(struct urb *urb) struct usb_serial_port *port = urb->context; int status = urb->status; - dbg("%s - port %0x\n", __func__, port->number); + dbg("%s - port %0x", __func__, port->number); port->write_urb_busy = 0; if (status) { diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index a654317..7732866 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -217,7 +217,7 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, spin_lock_irqsave(&priv->lock, flags); if (priv->outstanding_urbs > URB_UPPER_LIMIT) { spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - write limit hit\n", __func__); + dbg("%s - write limit hit", __func__); return 0; } priv->outstanding_urbs++; @@ -288,7 +288,7 @@ static int opticon_write_room(struct tty_struct *tty) spin_lock_irqsave(&priv->lock, flags); if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) { spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - write limit hit\n", __func__); + dbg("%s - write limit hit", __func__); return 0; } spin_unlock_irqrestore(&priv->lock, flags); diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 51b0beb..f6646b3 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1028,7 +1028,7 @@ static void option_instat_callback(struct urb *urb) (struct usb_ctrlrequest *)urb->transfer_buffer; if (!req_pkt) { - dbg("%s: NULL req_pkt\n", __func__); + dbg("%s: NULL req_pkt", __func__); return; } if ((req_pkt->bRequestType == 0xA1) && @@ -1452,7 +1452,7 @@ static int option_resume(struct usb_serial *serial) for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; if (!port->interrupt_in_urb) { - dbg("%s: No interrupt URB for port %d\n", __func__, i); + dbg("%s: No interrupt URB for port %d", __func__, i); continue; } err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO); diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index ebd1688..067e95a 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -609,7 +609,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty, if (i < 0) dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n", uartdata, i); - dbg("0x21:0x40:0:0 %d\n", i); + dbg("0x21:0x40:0:0 %d", i); if (cflag & CRTSCTS) { /* enable hardware flow control */ diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 178e4d9..4f7945e 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -368,7 +368,7 @@ static int visor_write(struct tty_struct *tty, struct usb_serial_port *port, spin_lock_irqsave(&priv->lock, flags); if (priv->outstanding_urbs > URB_UPPER_LIMIT) { spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - write limit hit\n", __func__); + dbg("%s - write limit hit", __func__); return 0; } priv->outstanding_urbs++; @@ -446,7 +446,7 @@ static int visor_write_room(struct tty_struct *tty) spin_lock_irqsave(&priv->lock, flags); if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) { spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - write limit hit\n", __func__); + dbg("%s - write limit hit", __func__); return 0; } spin_unlock_irqrestore(&priv->lock, flags); -- cgit v0.10.2 From f45ba776da4fe6c9a9eddd42b0fd5d1f15c260f3 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 5 Feb 2010 17:51:13 -0800 Subject: USB: Convert concatenated __FILE__ to %s, __FILE__ Reduces string space a bit Neaten a macro redefine of dbg Signed-off-by: Joe Perches Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c index 870b98e..8df33b8 100644 --- a/drivers/usb/host/ehci-ppc-of.c +++ b/drivers/usb/host/ehci-ppc-of.c @@ -134,21 +134,21 @@ ehci_hcd_ppc_of_probe(struct of_device *op, const struct of_device_id *match) hcd->rsrc_len = res.end - res.start + 1; if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - printk(KERN_ERR __FILE__ ": request_mem_region failed\n"); + printk(KERN_ERR "%s: request_mem_region failed\n", __FILE__); rv = -EBUSY; goto err_rmr; } irq = irq_of_parse_and_map(dn, 0); if (irq == NO_IRQ) { - printk(KERN_ERR __FILE__ ": irq_of_parse_and_map failed\n"); + printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", __FILE__); rv = -EBUSY; goto err_irq; } hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); if (!hcd->regs) { - printk(KERN_ERR __FILE__ ": ioremap failed\n"); + printk(KERN_ERR "%s: ioremap failed\n", __FILE__); rv = -ENOMEM; goto err_ioremap; } @@ -161,9 +161,9 @@ ehci_hcd_ppc_of_probe(struct of_device *op, const struct of_device_id *match) ehci->ohci_hcctrl_reg = ioremap(res.start + OHCI_HCCTRL_OFFSET, OHCI_HCCTRL_LEN); else - pr_debug(__FILE__ ": no ohci offset in fdt\n"); + pr_debug("%s: no ohci offset in fdt\n", __FILE__); if (!ehci->ohci_hcctrl_reg) { - pr_debug(__FILE__ ": ioremap for ohci hcctrl failed\n"); + pr_debug("%s: ioremap for ohci hcctrl failed\n", __FILE__); } else { ehci->has_amcc_usb23 = 1; } @@ -241,7 +241,7 @@ static int ehci_hcd_ppc_of_remove(struct of_device *op) else release_mem_region(res.start, 0x4); else - pr_debug(__FILE__ ": no ohci offset in fdt\n"); + pr_debug("%s: no ohci offset in fdt\n", __FILE__); of_node_put(np); } diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c index 4937de7..f603bb2 100644 --- a/drivers/usb/host/ehci-xilinx-of.c +++ b/drivers/usb/host/ehci-xilinx-of.c @@ -177,21 +177,21 @@ ehci_hcd_xilinx_of_probe(struct of_device *op, const struct of_device_id *match) hcd->rsrc_len = res.end - res.start + 1; if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - printk(KERN_ERR __FILE__ ": request_mem_region failed\n"); + printk(KERN_ERR "%s: request_mem_region failed\n", __FILE__); rv = -EBUSY; goto err_rmr; } irq = irq_of_parse_and_map(dn, 0); if (irq == NO_IRQ) { - printk(KERN_ERR __FILE__ ": irq_of_parse_and_map failed\n"); + printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", __FILE__); rv = -EBUSY; goto err_irq; } hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); if (!hcd->regs) { - printk(KERN_ERR __FILE__ ": ioremap failed\n"); + printk(KERN_ERR "%s: ioremap failed\n", __FILE__); rv = -ENOMEM; goto err_ioremap; } diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c index 811f5dfd..8ad2441 100644 --- a/drivers/usb/host/ohci-dbg.c +++ b/drivers/usb/host/ohci-dbg.c @@ -53,13 +53,13 @@ urb_print(struct urb * urb, char * str, int small, int status) int i, len; if (usb_pipecontrol (pipe)) { - printk (KERN_DEBUG __FILE__ ": setup(8):"); + printk (KERN_DEBUG "%s: setup(8):", __FILE__); for (i = 0; i < 8 ; i++) printk (" %02x", ((__u8 *) urb->setup_packet) [i]); printk ("\n"); } if (urb->transfer_buffer_length > 0 && urb->transfer_buffer) { - printk (KERN_DEBUG __FILE__ ": data(%d/%d):", + printk (KERN_DEBUG "%s: data(%d/%d):", __FILE__, urb->actual_length, urb->transfer_buffer_length); len = usb_pipeout (pipe)? diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c index de42283..18d39f0 100644 --- a/drivers/usb/host/ohci-lh7a404.c +++ b/drivers/usb/host/ohci-lh7a404.c @@ -28,8 +28,8 @@ extern int usb_disabled(void); static void lh7a404_start_hc(struct platform_device *dev) { - printk(KERN_DEBUG __FILE__ - ": starting LH7A404 OHCI USB Controller\n"); + printk(KERN_DEBUG "%s: starting LH7A404 OHCI USB Controller\n", + __FILE__); /* * Now, carefully enable the USB clock, and take @@ -39,14 +39,13 @@ static void lh7a404_start_hc(struct platform_device *dev) udelay(1000); USBH_CMDSTATUS = OHCI_HCR; - printk(KERN_DEBUG __FILE__ - ": Clock to USB host has been enabled \n"); + printk(KERN_DEBUG "%s: Clock to USB host has been enabled \n", __FILE__); } static void lh7a404_stop_hc(struct platform_device *dev) { - printk(KERN_DEBUG __FILE__ - ": stopping LH7A404 OHCI USB Controller\n"); + printk(KERN_DEBUG "%s: stopping LH7A404 OHCI USB Controller\n", + __FILE__); CSC_PWRCNT &= ~CSC_PWRCNT_USBH_EN; /* Disable clock */ } diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c index 2a7def1..103263c 100644 --- a/drivers/usb/host/ohci-ppc-of.c +++ b/drivers/usb/host/ohci-ppc-of.c @@ -114,21 +114,21 @@ ohci_hcd_ppc_of_probe(struct of_device *op, const struct of_device_id *match) hcd->rsrc_len = res.end - res.start + 1; if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - printk(KERN_ERR __FILE__ ": request_mem_region failed\n"); + printk(KERN_ERR "%s: request_mem_region failed\n", __FILE__); rv = -EBUSY; goto err_rmr; } irq = irq_of_parse_and_map(dn, 0); if (irq == NO_IRQ) { - printk(KERN_ERR __FILE__ ": irq_of_parse_and_map failed\n"); + printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", __FILE__); rv = -EBUSY; goto err_irq; } hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); if (!hcd->regs) { - printk(KERN_ERR __FILE__ ": ioremap failed\n"); + printk(KERN_ERR "%s: ioremap failed\n", __FILE__); rv = -ENOMEM; goto err_ioremap; } @@ -169,7 +169,7 @@ ohci_hcd_ppc_of_probe(struct of_device *op, const struct of_device_id *match) } else release_mem_region(res.start, 0x4); } else - pr_debug(__FILE__ ": cannot get ehci offset from fdt\n"); + pr_debug("%s: cannot get ehci offset from fdt\n", __FILE__); } iounmap(hcd->regs); diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c index cd3398b..89e670e 100644 --- a/drivers/usb/host/ohci-ppc-soc.c +++ b/drivers/usb/host/ohci-ppc-soc.c @@ -41,14 +41,14 @@ static int usb_hcd_ppc_soc_probe(const struct hc_driver *driver, res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (!res) { - pr_debug(__FILE__ ": no irq\n"); + pr_debug("%s: no irq\n", __FILE__); return -ENODEV; } irq = res->start; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { - pr_debug(__FILE__ ": no reg addr\n"); + pr_debug("%s: no reg addr\n", __FILE__); return -ENODEV; } @@ -59,14 +59,14 @@ static int usb_hcd_ppc_soc_probe(const struct hc_driver *driver, hcd->rsrc_len = res->end - res->start + 1; if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - pr_debug(__FILE__ ": request_mem_region failed\n"); + pr_debug("%s: request_mem_region failed\n", __FILE__); retval = -EBUSY; goto err1; } hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); if (!hcd->regs) { - pr_debug(__FILE__ ": ioremap failed\n"); + pr_debug("%s: ioremap failed\n", __FILE__); retval = -ENOMEM; goto err2; } diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c index e4bbe8e..d8eb3bd 100644 --- a/drivers/usb/host/ohci-sa1111.c +++ b/drivers/usb/host/ohci-sa1111.c @@ -31,8 +31,8 @@ static void sa1111_start_hc(struct sa1111_dev *dev) { unsigned int usb_rst = 0; - printk(KERN_DEBUG __FILE__ - ": starting SA-1111 OHCI USB Controller\n"); + printk(KERN_DEBUG "%s: starting SA-1111 OHCI USB Controller\n", + __FILE__); #ifdef CONFIG_SA1100_BADGE4 if (machine_is_badge4()) { @@ -65,8 +65,8 @@ static void sa1111_start_hc(struct sa1111_dev *dev) static void sa1111_stop_hc(struct sa1111_dev *dev) { unsigned int usb_rst; - printk(KERN_DEBUG __FILE__ - ": stopping SA-1111 OHCI USB Controller\n"); + printk(KERN_DEBUG "%s: stopping SA-1111 OHCI USB Controller\n", + __FILE__); /* * Put the USB host controller into reset. diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c index 306e978..d240de0 100644 --- a/drivers/usb/misc/adutux.c +++ b/drivers/usb/misc/adutux.c @@ -38,7 +38,7 @@ static int debug = 1; #define dbg(lvl, format, arg...) \ do { \ if (debug >= lvl) \ - printk(KERN_DEBUG __FILE__ " : " format " \n", ## arg); \ + printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg); \ } while (0) @@ -132,8 +132,8 @@ static void adu_debug_data(int level, const char *function, int size, if (debug < level) return; - printk(KERN_DEBUG __FILE__": %s - length = %d, data = ", - function, size); + printk(KERN_DEBUG "%s: %s - length = %d, data = ", + __FILE__, function, size); for (i = 0; i < size; ++i) printk("%.2x ", data[i]); printk("\n"); diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c index 7c0bd13..dd41d87 100644 --- a/drivers/usb/misc/ldusb.c +++ b/drivers/usb/misc/ldusb.c @@ -798,7 +798,7 @@ static int __init ld_usb_init(void) /* register this driver with the USB subsystem */ retval = usb_register(&ld_usb_driver); if (retval) - err("usb_register failed for the "__FILE__" driver. Error number %d\n", retval); + err("usb_register failed for the %s driver. Error number %d\n", __FILE__, retval); return retval; } diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index 3d4378f..8547bf9 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -95,8 +95,11 @@ /* Use our own dbg macro */ #undef dbg -#define dbg(lvl, format, arg...) do { if (debug >= lvl) printk(KERN_DEBUG __FILE__ ": " format "\n", ## arg); } while (0) - +#define dbg(lvl, format, arg...) \ +do { \ + if (debug >= lvl) \ + printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg); \ +} while (0) /* Version Information */ #define DRIVER_VERSION "v0.96" @@ -302,7 +305,7 @@ static inline void lego_usb_tower_debug_data (int level, const char *function, i if (debug < level) return; - printk (KERN_DEBUG __FILE__": %s - length = %d, data = ", function, size); + printk (KERN_DEBUG "%s: %s - length = %d, data = ", __FILE__, function, size); for (i = 0; i < size; ++i) { printk ("%.2x ", data[i]); } @@ -1055,7 +1058,7 @@ static int __init lego_usb_tower_init(void) /* register this driver with the USB subsystem */ result = usb_register(&tower_driver); if (result < 0) { - err("usb_register failed for the "__FILE__" driver. Error number %d", result); + err("usb_register failed for the %s driver. Error number %d", __FILE__, result); retval = -1; goto exit; } diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 7793c4a..89c724c 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -218,8 +218,8 @@ static void omninet_read_bulk_callback(struct urb *urb) if (debug && header->oh_xxx != 0x30) { if (urb->actual_length) { - printk(KERN_DEBUG __FILE__ - ": omninet_read %d: ", header->oh_len); + printk(KERN_DEBUG "%s: omninet_read %d: ", + __FILE__, header->oh_len); for (i = 0; i < (header->oh_len + OMNINET_HEADERLEN); i++) printk("%.2x ", data[i]); -- cgit v0.10.2 From efcbd3df079a6f8a8a2d5207c4e8429e02356c79 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 5 Feb 2010 18:09:49 -0800 Subject: USB: Extend and neaten dbg macros Add format/argument validation for #ifndef DEBUG dbg macro Neaten dbg macro definitions Signed-off-by: Joe Perches Signed-off-by: Greg Kroah-Hartman diff --git a/include/linux/usb.h b/include/linux/usb.h index ad50fc8..3492abf 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1566,14 +1566,18 @@ extern void usb_register_notify(struct notifier_block *nb); extern void usb_unregister_notify(struct notifier_block *nb); #ifdef DEBUG -#define dbg(format, arg...) printk(KERN_DEBUG "%s: " format "\n" , \ - __FILE__ , ## arg) +#define dbg(format, arg...) \ + printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg) #else -#define dbg(format, arg...) do {} while (0) +#define dbg(format, arg...) \ +do { \ + if (0) \ + printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg); \ +} while (0) #endif -#define err(format, arg...) printk(KERN_ERR KBUILD_MODNAME ": " \ - format "\n" , ## arg) +#define err(format, arg...) \ + printk(KERN_ERR KBUILD_MODNAME ": " format "\n", ##arg) /* debugfs stuff */ extern struct dentry *usb_debug_root; diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 1819396..0a458b8 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -351,14 +351,11 @@ static inline void usb_serial_debug_data(int debug, /* Use our own dbg macro */ #undef dbg -#define dbg(format, arg...) \ - do { \ - if (debug) \ - printk(KERN_DEBUG "%s: " format "\n" , __FILE__ , \ - ## arg); \ - } while (0) - - +#define dbg(format, arg...) \ +do { \ + if (debug) \ + printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg); \ +} while (0) #endif /* __LINUX_USB_SERIAL_H */ -- cgit v0.10.2 From bd07c551aae5d2200c7b195142e5ba63f26424da Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 8 Feb 2010 10:10:44 +0000 Subject: USB: cp210x: Add 81E8 (Zephyr Bioharness) As reported in http://bugzilla.kernel.org/show_bug.cgi?id=10980 Signed-off-by: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index e2600e7..507382b 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -91,11 +91,12 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */ { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */ { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */ + { USB_DEVICE(0x10C4, 0x81E8) }, /* Zephyr Bioharness */ { USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */ { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ { USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */ { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */ - { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */ + { USB_DEVICE(0x10C4, 0x8293) }, /* Telegesys ETRX2USB */ { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ { USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */ -- cgit v0.10.2 From 49d3380e3f1297ff7bdc700c0a7fe6c3a036b3ab Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 8 Feb 2010 10:10:04 +0000 Subject: tty: Fix various bogus WARN checks in the usb serial layer We are now refcounted and all the port.count checking is no longer valid and in fact produces false warnings. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 9c7e1d5..3873660 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -358,10 +358,6 @@ static int serial_write(struct tty_struct *tty, const unsigned char *buf, dbg("%s - port %d, %d byte(s)", __func__, port->number, count); - /* count is managed under the mutex lock for the tty so cannot - drop to zero until after the last close completes */ - WARN_ON(!port->port.count); - /* pass on to the driver specific version of this function */ retval = port->serial->type->write(tty, port, buf, count); @@ -373,7 +369,6 @@ static int serial_write_room(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; dbg("%s - port %d", __func__, port->number); - WARN_ON(!port->port.count); /* pass on to the driver specific version of this function */ return port->serial->type->write_room(tty); } @@ -396,7 +391,6 @@ static void serial_throttle(struct tty_struct *tty) struct usb_serial_port *port = tty->driver_data; dbg("%s - port %d", __func__, port->number); - WARN_ON(!port->port.count); /* pass on to the driver specific version of this function */ if (port->serial->type->throttle) port->serial->type->throttle(tty); @@ -407,7 +401,6 @@ static void serial_unthrottle(struct tty_struct *tty) struct usb_serial_port *port = tty->driver_data; dbg("%s - port %d", __func__, port->number); - WARN_ON(!port->port.count); /* pass on to the driver specific version of this function */ if (port->serial->type->unthrottle) port->serial->type->unthrottle(tty); @@ -421,8 +414,6 @@ static int serial_ioctl(struct tty_struct *tty, struct file *file, dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd); - WARN_ON(!port->port.count); - /* pass on to the driver specific version of this function if it is available */ if (port->serial->type->ioctl) { @@ -437,7 +428,6 @@ static void serial_set_termios(struct tty_struct *tty, struct ktermios *old) struct usb_serial_port *port = tty->driver_data; dbg("%s - port %d", __func__, port->number); - WARN_ON(!port->port.count); /* pass on to the driver specific version of this function if it is available */ if (port->serial->type->set_termios) @@ -452,7 +442,6 @@ static int serial_break(struct tty_struct *tty, int break_state) dbg("%s - port %d", __func__, port->number); - WARN_ON(!port->port.count); /* pass on to the driver specific version of this function if it is available */ if (port->serial->type->break_ctl) @@ -513,7 +502,6 @@ static int serial_tiocmget(struct tty_struct *tty, struct file *file) dbg("%s - port %d", __func__, port->number); - WARN_ON(!port->port.count); if (port->serial->type->tiocmget) return port->serial->type->tiocmget(tty, file); return -EINVAL; @@ -526,7 +514,6 @@ static int serial_tiocmset(struct tty_struct *tty, struct file *file, dbg("%s - port %d", __func__, port->number); - WARN_ON(!port->port.count); if (port->serial->type->tiocmset) return port->serial->type->tiocmset(tty, file, set, clear); return -EINVAL; -- cgit v0.10.2 From cceffe9348f93188d7811bda95924d4bd3040d0f Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 8 Feb 2010 09:45:12 -0500 Subject: USB: remove debugging message for uevent constructions This patch (as1332) removes an unneeded and annoying debugging message announcing all USB uevent constructions. Signed-off-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 6850ec6..a7037bf 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -710,9 +710,6 @@ static int usb_uevent(struct device *dev, struct kobj_uevent_env *env) { struct usb_device *usb_dev; - /* driver is often null here; dev_dbg() would oops */ - pr_debug("usb %s: uevent\n", dev_name(dev)); - if (is_usb_device(dev)) { usb_dev = to_usb_device(dev); } else if (is_usb_interface(dev)) { @@ -724,6 +721,7 @@ static int usb_uevent(struct device *dev, struct kobj_uevent_env *env) } if (usb_dev->devnum < 0) { + /* driver is often null here; dev_dbg() would oops */ pr_debug("usb %s: already deleted?\n", dev_name(dev)); return -ENODEV; } -- cgit v0.10.2 From 05197921ff3dad52d99fd1647974c57d9c28d40e Mon Sep 17 00:00:00 2001 From: Edward Shao Date: Thu, 11 Feb 2010 03:37:30 +0800 Subject: USB: xhci: Fix finding extended capabilities registers According "5.3.6 Capability Parameters (HCCPARAMS)" of xHCI rev0.96 spec, value of xECP register indicates a relative offset, in 32-bit words, from Base to the beginning of the first extended capability. The wrong calculation will cause BIOS handoff fail (not handoff from BIOS) in some platform with BIOS USB legacy sup support. Signed-off-by: Edward Shao Cc: Sarah Sharp Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h index ecc131c..78c4eda 100644 --- a/drivers/usb/host/xhci-ext-caps.h +++ b/drivers/usb/host/xhci-ext-caps.h @@ -101,12 +101,15 @@ static inline int xhci_find_next_cap_offset(void __iomem *base, int ext_offset) next = readl(base + ext_offset); - if (ext_offset == XHCI_HCC_PARAMS_OFFSET) + if (ext_offset == XHCI_HCC_PARAMS_OFFSET) { /* Find the first extended capability */ next = XHCI_HCC_EXT_CAPS(next); - else + ext_offset = 0; + } else { /* Find the next extended capability */ next = XHCI_EXT_CAPS_NEXT(next); + } + if (!next) return 0; /* -- cgit v0.10.2 From 7650cd9678df29b01d1e46a9d2ce7e5d8c72b3ce Mon Sep 17 00:00:00 2001 From: Elina Pasheva Date: Thu, 11 Feb 2010 18:37:40 -0800 Subject: USB: serial: sierra driver adding reset_resume function This patch adds a new function to the sierra.c driver, sierra_reset_resume(). This new function completes the suite of Dynamic Power Management commands in the sierra.c driver. Signed-off-by: Elina Pasheva Signed-off-by: Greg Kroah-Hartman drivers/usb/serial/sierra.c | 30 ++++++++++++++++++++---------- 1 file changed, 20 insertions(+), 10 deletions(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index bb0d56c..6aeea400 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -304,16 +304,6 @@ static const struct usb_device_id id_table[] = { }; MODULE_DEVICE_TABLE(usb, id_table); -static struct usb_driver sierra_driver = { - .name = "sierra", - .probe = usb_serial_probe, - .disconnect = usb_serial_disconnect, - .suspend = usb_serial_suspend, - .resume = usb_serial_resume, - .id_table = id_table, - .no_dynamic_id = 1, - .supports_autosuspend = 1, -}; struct sierra_port_private { spinlock_t lock; /* lock the structure */ @@ -1061,11 +1051,31 @@ static int sierra_resume(struct usb_serial *serial) return ec ? -EIO : 0; } + +static int sierra_reset_resume(struct usb_interface *intf) +{ + struct usb_serial *serial = usb_get_intfdata(intf); + dev_err(&serial->dev->dev, "%s\n", __func__); + return usb_serial_resume(intf); +} #else #define sierra_suspend NULL #define sierra_resume NULL +#define sierra_reset_resume NULL #endif +static struct usb_driver sierra_driver = { + .name = "sierra", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .suspend = usb_serial_suspend, + .resume = usb_serial_resume, + .reset_resume = sierra_reset_resume, + .id_table = id_table, + .no_dynamic_id = 1, + .supports_autosuspend = 1, +}; + static struct usb_serial_driver sierra_device = { .driver = { .owner = THIS_MODULE, -- cgit v0.10.2 From b87c6e86dac1bb5222279cc8ff7e09529e1c4ed9 Mon Sep 17 00:00:00 2001 From: Elina Pasheva Date: Mon, 15 Feb 2010 14:50:14 -0800 Subject: USB: serial: sierra driver indat_callback fix A crash has been reported with sierra driver on disconnect with Ubuntu/Lucid distribution based on kernel-2.6.32. The cause of the crash was determined as "NULL tty pointer was being referenced" and the NULL pointer was passed by sierra_indat_callback(). This patch modifies sierra_indat_callback() function to check for NULL tty structure pointer. This modification prevents a crash from happening when the device is disconnected. This patch fixes the bug reported in Launchpad: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/511157 Signed-off-by: Elina Pasheva Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 6aeea400..fcec466 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -594,14 +594,17 @@ static void sierra_indat_callback(struct urb *urb) } else { if (urb->actual_length) { tty = tty_port_tty_get(&port->port); - - tty_buffer_request_room(tty, urb->actual_length); - tty_insert_flip_string(tty, data, urb->actual_length); - tty_flip_buffer_push(tty); - - tty_kref_put(tty); - usb_serial_debug_data(debug, &port->dev, __func__, - urb->actual_length, data); + if (tty) { + tty_buffer_request_room(tty, + urb->actual_length); + tty_insert_flip_string(tty, data, + urb->actual_length); + tty_flip_buffer_push(tty); + + tty_kref_put(tty); + usb_serial_debug_data(debug, &port->dev, + __func__, urb->actual_length, data); + } } else { dev_dbg(&port->dev, "%s: empty read urb" " received\n", __func__); -- cgit v0.10.2 From bdb581bd6bd59a3303974977544d679d849214d1 Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Fri, 12 Feb 2010 17:54:59 +0530 Subject: USB: omap: ehci: kill 2 compile warnings Kill these compile warnings: CC [M] drivers/usb/host/ehci-hcd.o drivers/usb/host/ehci-dbg.c:45: warning: 'dbg_hcs_params' defined but not used drivers/usb/host/ehci-dbg.c:89: warning: 'dbg_hcc_params' defined but not used Signed-off-by: Anand Gadiyar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 17e4ceb..24d3d52 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -645,6 +645,9 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) omap->ehci->regs = hcd->regs + HC_LENGTH(readl(&omap->ehci->caps->hc_capbase)); + dbg_hcs_params(omap->ehci, "reset"); + dbg_hcc_params(omap->ehci, "reset"); + /* cache this readonly data; minimize chip reads */ omap->ehci->hcs_params = readl(&omap->ehci->caps->hcs_params); -- cgit v0.10.2 From 9b43cffbbd3e9f77e16826513f26544cce3b5864 Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Fri, 12 Feb 2010 17:48:59 +0530 Subject: USB: ehci: omap: use default interrupt threshold The current driver reduces the interrupt threshold to 1 microframe. This was an accidental change and is not really required. The default of 8 microframes will do just fine. So change it back. Signed-off-by: Anand Gadiyar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 24d3d52..bd8922a 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -651,10 +651,6 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) /* cache this readonly data; minimize chip reads */ omap->ehci->hcs_params = readl(&omap->ehci->caps->hcs_params); - /* SET 1 micro-frame Interrupt interval */ - writel(readl(&omap->ehci->regs->command) | (1 << 16), - &omap->ehci->regs->command); - ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); if (ret) { dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret); -- cgit v0.10.2 From bdee2d8432f5af5af953896182a59ec1c5d6fa3a Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Fri, 12 Feb 2010 17:49:00 +0530 Subject: USB: ehci: omap: Update TODO list in comments DPLL5 programming was moved out of this file before submission. Update the TODO list in the comments to reflect this Signed-off-by: Anand Gadiyar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index bd8922a..f0282d6 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -26,10 +26,9 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * - * TODO (last updated Feb 23rd, 2009): + * TODO (last updated Feb 12, 2010): * - add kernel-doc * - enable AUTOIDLE - * - move DPLL5 programming to clock fw * - add suspend/resume * - move workarounds to board-files */ -- cgit v0.10.2 From efe7daf2231a6beb59f0f641461d19fa62fb83ab Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 12 Feb 2010 23:52:34 +0400 Subject: USB: OHCI: DA8xx/OMAP-L1x glue layer Texas Instruments DA8xx/OMAP-L1x OHCI glue layer. This OHCI implementation is not without quirks: there's only one physical port despite the root hub reporting two; the port's power control and over-current status bits are not connected to any pins, however, at least on the DA830 EVM board, those signals are connected via GPIO, thus the provision was made for overriding the OHCI port power and over-current bits at the board level... Signed-off-by: Mikhail Cherkashin Signed-off-by: Sergei Shtylyov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index b92b086..2859472 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -40,6 +40,7 @@ config USB_ARCH_HAS_OHCI default y if ARCH_PNX4008 && I2C default y if MFD_TC6393XB default y if ARCH_W90X900 + default y if ARCH_DAVINCI_DA8XX # PPC: default y if STB03xxx default y if PPC_MPC52xx diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c new file mode 100644 index 0000000..4aa08d3 --- /dev/null +++ b/drivers/usb/host/ohci-da8xx.c @@ -0,0 +1,456 @@ +/* + * OHCI HCD (Host Controller Driver) for USB. + * + * TI DA8xx (OMAP-L1x) Bus Glue + * + * Derived from: ohci-omap.c and ohci-s3c2410.c + * Copyright (C) 2008-2009 MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include + +#include +#include + +#ifndef CONFIG_ARCH_DAVINCI_DA8XX +#error "This file is DA8xx bus glue. Define CONFIG_ARCH_DAVINCI_DA8XX." +#endif + +#define CFGCHIP2 DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG) + +static struct clk *usb11_clk; +static struct clk *usb20_clk; + +/* Over-current indicator change bitmask */ +static volatile u16 ocic_mask; + +static void ohci_da8xx_clock(int on) +{ + u32 cfgchip2; + + cfgchip2 = __raw_readl(CFGCHIP2); + if (on) { + clk_enable(usb11_clk); + + /* + * If USB 1.1 reference clock is sourced from USB 2.0 PHY, we + * need to enable the USB 2.0 module clocking, start its PHY, + * and not allow it to stop the clock during USB 2.0 suspend. + */ + if (!(cfgchip2 & CFGCHIP2_USB1PHYCLKMUX)) { + clk_enable(usb20_clk); + + cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN); + cfgchip2 |= CFGCHIP2_PHY_PLLON; + __raw_writel(cfgchip2, CFGCHIP2); + + pr_info("Waiting for USB PHY clock good...\n"); + while (!(__raw_readl(CFGCHIP2) & CFGCHIP2_PHYCLKGD)) + cpu_relax(); + } + + /* Enable USB 1.1 PHY */ + cfgchip2 |= CFGCHIP2_USB1SUSPENDM; + } else { + clk_disable(usb11_clk); + if (!(cfgchip2 & CFGCHIP2_USB1PHYCLKMUX)) + clk_disable(usb20_clk); + + /* Disable USB 1.1 PHY */ + cfgchip2 &= ~CFGCHIP2_USB1SUSPENDM; + } + __raw_writel(cfgchip2, CFGCHIP2); +} + +/* + * Handle the port over-current indicator change. + */ +static void ohci_da8xx_ocic_handler(struct da8xx_ohci_root_hub *hub, + unsigned port) +{ + ocic_mask |= 1 << port; + + /* Once over-current is detected, the port needs to be powered down */ + if (hub->get_oci(port) > 0) + hub->set_power(port, 0); +} + +static int ohci_da8xx_init(struct usb_hcd *hcd) +{ + struct device *dev = hcd->self.controller; + struct da8xx_ohci_root_hub *hub = dev->platform_data; + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int result; + u32 rh_a; + + dev_dbg(dev, "starting USB controller\n"); + + ohci_da8xx_clock(1); + + /* + * DA8xx only have 1 port connected to the pins but the HC root hub + * register A reports 2 ports, thus we'll have to override it... + */ + ohci->num_ports = 1; + + result = ohci_init(ohci); + if (result < 0) + return result; + + /* + * Since we're providing a board-specific root hub port power control + * and over-current reporting, we have to override the HC root hub A + * register's default value, so that ohci_hub_control() could return + * the correct hub descriptor... + */ + rh_a = ohci_readl(ohci, &ohci->regs->roothub.a); + if (hub->set_power) { + rh_a &= ~RH_A_NPS; + rh_a |= RH_A_PSM; + } + if (hub->get_oci) { + rh_a &= ~RH_A_NOCP; + rh_a |= RH_A_OCPM; + } + rh_a &= ~RH_A_POTPGT; + rh_a |= hub->potpgt << 24; + ohci_writel(ohci, rh_a, &ohci->regs->roothub.a); + + return result; +} + +static void ohci_da8xx_stop(struct usb_hcd *hcd) +{ + ohci_stop(hcd); + ohci_da8xx_clock(0); +} + +static int ohci_da8xx_start(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int result; + + result = ohci_run(ohci); + if (result < 0) + ohci_da8xx_stop(hcd); + + return result; +} + +/* + * Update the status data from the hub with the over-current indicator change. + */ +static int ohci_da8xx_hub_status_data(struct usb_hcd *hcd, char *buf) +{ + int length = ohci_hub_status_data(hcd, buf); + + /* See if we have OCIC bit set on port 1 */ + if (ocic_mask & (1 << 1)) { + dev_dbg(hcd->self.controller, "over-current indicator change " + "on port 1\n"); + + if (!length) + length = 1; + + buf[0] |= 1 << 1; + } + return length; +} + +/* + * Look at the control requests to the root hub and see if we need to override. + */ +static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength) +{ + struct device *dev = hcd->self.controller; + struct da8xx_ohci_root_hub *hub = dev->platform_data; + int temp; + + switch (typeReq) { + case GetPortStatus: + /* Check the port number */ + if (wIndex != 1) + break; + + dev_dbg(dev, "GetPortStatus(%u)\n", wIndex); + + temp = roothub_portstatus(hcd_to_ohci(hcd), wIndex - 1); + + /* The port power status (PPS) bit defaults to 1 */ + if (hub->get_power && hub->get_power(wIndex) == 0) + temp &= ~RH_PS_PPS; + + /* The port over-current indicator (POCI) bit is always 0 */ + if (hub->get_oci && hub->get_oci(wIndex) > 0) + temp |= RH_PS_POCI; + + /* The over-current indicator change (OCIC) bit is 0 too */ + if (ocic_mask & (1 << wIndex)) + temp |= RH_PS_OCIC; + + put_unaligned(cpu_to_le32(temp), (__le32 *)buf); + return 0; + case SetPortFeature: + temp = 1; + goto check_port; + case ClearPortFeature: + temp = 0; + +check_port: + /* Check the port number */ + if (wIndex != 1) + break; + + switch (wValue) { + case USB_PORT_FEAT_POWER: + dev_dbg(dev, "%sPortFeature(%u): %s\n", + temp ? "Set" : "Clear", wIndex, "POWER"); + + if (!hub->set_power) + return -EPIPE; + + return hub->set_power(wIndex, temp) ? -EPIPE : 0; + case USB_PORT_FEAT_C_OVER_CURRENT: + dev_dbg(dev, "%sPortFeature(%u): %s\n", + temp ? "Set" : "Clear", wIndex, + "C_OVER_CURRENT"); + + if (temp) + ocic_mask |= 1 << wIndex; + else + ocic_mask &= ~(1 << wIndex); + return 0; + } + } + + return ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); +} + +static const struct hc_driver ohci_da8xx_hc_driver = { + .description = hcd_name, + .product_desc = "DA8xx OHCI", + .hcd_priv_size = sizeof(struct ohci_hcd), + + /* + * generic hardware linkage + */ + .irq = ohci_irq, + .flags = HCD_USB11 | HCD_MEMORY, + + /* + * basic lifecycle operations + */ + .reset = ohci_da8xx_init, + .start = ohci_da8xx_start, + .stop = ohci_da8xx_stop, + .shutdown = ohci_shutdown, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + + /* + * scheduling support + */ + .get_frame_number = ohci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ohci_da8xx_hub_status_data, + .hub_control = ohci_da8xx_hub_control, + +#ifdef CONFIG_PM + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, +#endif + .start_port_reset = ohci_start_port_reset, +}; + +/*-------------------------------------------------------------------------*/ + + +/** + * usb_hcd_da8xx_probe - initialize DA8xx-based HCDs + * Context: !in_interrupt() + * + * Allocates basic resources for this USB host controller, and + * then invokes the start() method for the HCD associated with it + * through the hotplug entry's driver_data. + */ +static int usb_hcd_da8xx_probe(const struct hc_driver *driver, + struct platform_device *pdev) +{ + struct da8xx_ohci_root_hub *hub = pdev->dev.platform_data; + struct usb_hcd *hcd; + struct resource *mem; + int error, irq; + + if (hub == NULL) + return -ENODEV; + + usb11_clk = clk_get(&pdev->dev, "usb11"); + if (IS_ERR(usb11_clk)) + return PTR_ERR(usb11_clk); + + usb20_clk = clk_get(&pdev->dev, "usb20"); + if (IS_ERR(usb20_clk)) { + error = PTR_ERR(usb20_clk); + goto err0; + } + + hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); + if (!hcd) { + error = -ENOMEM; + goto err1; + } + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) { + error = -ENODEV; + goto err2; + } + hcd->rsrc_start = mem->start; + hcd->rsrc_len = mem->end - mem->start + 1; + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { + dev_dbg(&pdev->dev, "request_mem_region failed\n"); + error = -EBUSY; + goto err2; + } + + hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + if (!hcd->regs) { + dev_err(&pdev->dev, "ioremap failed\n"); + error = -ENOMEM; + goto err3; + } + + ohci_hcd_init(hcd_to_ohci(hcd)); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + error = -ENODEV; + goto err4; + } + error = usb_add_hcd(hcd, irq, IRQF_DISABLED); + if (error) + goto err4; + + if (hub->ocic_notify) { + error = hub->ocic_notify(ohci_da8xx_ocic_handler); + if (!error) + return 0; + } + + usb_remove_hcd(hcd); +err4: + iounmap(hcd->regs); +err3: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err2: + usb_put_hcd(hcd); +err1: + clk_put(usb20_clk); +err0: + clk_put(usb11_clk); + return error; +} + +/** + * usb_hcd_da8xx_remove - shutdown processing for DA8xx-based HCDs + * @dev: USB Host Controller being removed + * Context: !in_interrupt() + * + * Reverses the effect of usb_hcd_da8xx_probe(), first invoking + * the HCD's stop() method. It is always called from a thread + * context, normally "rmmod", "apmd", or something similar. + */ +static inline void +usb_hcd_da8xx_remove(struct usb_hcd *hcd, struct platform_device *pdev) +{ + struct da8xx_ohci_root_hub *hub = pdev->dev.platform_data; + + hub->ocic_notify(NULL); + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); + clk_put(usb20_clk); + clk_put(usb11_clk); +} + +static int ohci_hcd_da8xx_drv_probe(struct platform_device *dev) +{ + return usb_hcd_da8xx_probe(&ohci_da8xx_hc_driver, dev); +} + +static int ohci_hcd_da8xx_drv_remove(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + + usb_hcd_da8xx_remove(hcd, dev); + platform_set_drvdata(dev, NULL); + + return 0; +} + +#ifdef CONFIG_PM +static int ohci_da8xx_suspend(struct platform_device *dev, pm_message_t message) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + + if (time_before(jiffies, ohci->next_statechange)) + msleep(5); + ohci->next_statechange = jiffies; + + ohci_da8xx_clock(0); + hcd->state = HC_STATE_SUSPENDED; + dev->dev.power.power_state = PMSG_SUSPEND; + return 0; +} + +static int ohci_da8xx_resume(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + + if (time_before(jiffies, ohci->next_statechange)) + msleep(5); + ohci->next_statechange = jiffies; + + ohci_da8xx_clock(1); + dev->dev.power.power_state = PMSG_ON; + usb_hcd_resume_root_hub(hcd); + return 0; +} +#endif + +/* + * Driver definition to register with platform structure. + */ +static struct platform_driver ohci_hcd_da8xx_driver = { + .probe = ohci_hcd_da8xx_drv_probe, + .remove = ohci_hcd_da8xx_drv_remove, + .shutdown = usb_hcd_platform_shutdown, +#ifdef CONFIG_PM + .suspend = ohci_da8xx_suspend, + .resume = ohci_da8xx_resume, +#endif + .driver = { + .owner = THIS_MODULE, + .name = "ohci", + }, +}; diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 24eb747..afe59be 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1051,6 +1051,11 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER usb_hcd_pnx4008_driver #endif +#ifdef CONFIG_ARCH_DAVINCI_DA8XX +#include "ohci-da8xx.c" +#define PLATFORM_DRIVER ohci_hcd_da8xx_driver +#endif + #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) || \ defined(CONFIG_CPU_SUBTYPE_SH7763) || \ -- cgit v0.10.2 From 49d6271b85a3e18062eaf4d6f8d899abe00a7725 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 26 Feb 2010 11:49:39 -0500 Subject: usb-storage: use max_hw_sectors instead of max_sectors This patch (as1347) makes some adjustments to the way usb-storage handles the request-queue parameters. USB host controllers are able to handle arbitrarily long scatter-gather lists, since they are limited only by main memory and not by the controller hardware. Hence the sg_tablesize field in the host template can be increased to the maximum value. Drivers like usb-storage aren't supposed to touch the queue's max_sectors parameter; instead they are supposed to use the max_hw_sectors value. Accordingly, the patch replaces calls of queue_max_sectors() with calls of queue_max_hw_sectors(). Oddly enough, the blk_queue_max_sectors() routine is nevertheless still appropriate. The existing code imposes a limit of SCSI_DEFAULT_MAX_SECTORS (1024) on the values accepted by the max_sectors attribute file. There's no reason not to accept larger values, so the limit is removed. (It would be nice to change the file's name to max_hw_sectors, but the old name is already a well-established API.) Signed-off-by: Alan Stern CC: Matthew Dharm Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index aadc16b..4cc0355 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -133,7 +133,7 @@ static int slave_configure(struct scsi_device *sdev) if (us->fflags & US_FL_MAX_SECTORS_MIN) max_sectors = PAGE_CACHE_SIZE >> 9; - if (queue_max_sectors(sdev->request_queue) > max_sectors) + if (queue_max_hw_sectors(sdev->request_queue) > max_sectors) blk_queue_max_hw_sectors(sdev->request_queue, max_sectors); } else if (sdev->type == TYPE_TAPE) { @@ -484,7 +484,7 @@ static ssize_t show_max_sectors(struct device *dev, struct device_attribute *att { struct scsi_device *sdev = to_scsi_device(dev); - return sprintf(buf, "%u\n", queue_max_sectors(sdev->request_queue)); + return sprintf(buf, "%u\n", queue_max_hw_sectors(sdev->request_queue)); } /* Input routine for the sysfs max_sectors file */ @@ -494,9 +494,9 @@ static ssize_t store_max_sectors(struct device *dev, struct device_attribute *at struct scsi_device *sdev = to_scsi_device(dev); unsigned short ms; - if (sscanf(buf, "%hu", &ms) > 0 && ms <= SCSI_DEFAULT_MAX_SECTORS) { + if (sscanf(buf, "%hu", &ms) > 0) { blk_queue_max_hw_sectors(sdev->request_queue, ms); - return strlen(buf); + return count; } return -EINVAL; } @@ -539,7 +539,7 @@ struct scsi_host_template usb_stor_host_template = { .slave_configure = slave_configure, /* lots of sg segments can be handled */ - .sg_tablesize = SG_ALL, + .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS, /* limit the total size of a transfer to 120 KB */ .max_sectors = 240, -- cgit v0.10.2 From cd780694920fbf869b23c8afb0bd083e7b0448c7 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 25 Feb 2010 13:19:37 -0500 Subject: USB: fix the idProduct value for USB-3.0 root hubs This patch (as1346) changes the idProduct value for USB-3.0 root hubs from 0x0002 (which we already use for USB-2.0 root hubs) to 0x0003. Signed-off-by: Alan Stern Acked-by: Sarah Sharp CC: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index b07ba05..2f8cedd 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -142,7 +142,7 @@ static const u8 usb3_rh_dev_descriptor[18] = { 0x09, /* __u8 bMaxPacketSize0; 2^9 = 512 Bytes */ 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation */ - 0x02, 0x00, /* __le16 idProduct; device 0x0002 */ + 0x03, 0x00, /* __le16 idProduct; device 0x0003 */ KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */ 0x03, /* __u8 iManufacturer; */ -- cgit v0.10.2 From 6d61ae9112960a2b3ed3360602dfb3bfd357954f Mon Sep 17 00:00:00 2001 From: Dennis O'Brien Date: Mon, 15 Feb 2010 08:50:38 -0800 Subject: USB: vstusb.c: removal of driver for Vernier Software & Technology, Inc., devices and spectrometers This patch removes the vstusb driver and support from the Linux tree. This driver provided support for Vernier Software & Technology devices and spectrometers (Ocean Optics). This driver is being replaced by a user space - libusb - implementation. Signed-off-by: Jim Collar Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 35cf64d..35c9b51 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -139,7 +139,6 @@ Code Seq#(hex) Include File Comments 'K' all linux/kd.h 'L' 00-1F linux/loop.h conflict! 'L' 10-1F drivers/scsi/mpt2sas/mpt2sas_ctl.h conflict! -'L' 20-2F linux/usb/vstusb.h 'L' E0-FF linux/ppdd.h encrypted disk device driver 'M' all linux/soundcard.h conflict! diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index ef9bbef..55660ea 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -231,17 +231,3 @@ config USB_ISIGHTFW driver beforehand. Tools for doing so are available at http://bersace03.free.fr -config USB_VST - tristate "USB VST driver" - depends on USB - help - This driver is intended for Vernier Software Technologies - bulk usb devices such as their Ocean-Optics spectrometers or - Labquest. - It is a bulk channel driver with configurable read and write - timeouts. - - To compile this driver as a module, choose M here: the - module will be called vstusb. - - diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index 36dd40d..717703e 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -22,7 +22,6 @@ obj-$(CONFIG_USB_TEST) += usbtest.o obj-$(CONFIG_USB_TRANCEVIBRATOR) += trancevibrator.o obj-$(CONFIG_USB_USS720) += uss720.o obj-$(CONFIG_USB_SEVSEG) += usbsevseg.o -obj-$(CONFIG_USB_VST) += vstusb.o obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga/ diff --git a/drivers/usb/misc/vstusb.c b/drivers/usb/misc/vstusb.c deleted file mode 100644 index 874c81b..0000000 --- a/drivers/usb/misc/vstusb.c +++ /dev/null @@ -1,783 +0,0 @@ -/***************************************************************************** - * File: drivers/usb/misc/vstusb.c - * - * Purpose: Support for the bulk USB Vernier Spectrophotometers - * - * Author: Johnnie Peters - * Axian Consulting - * Beaverton, OR, USA 97005 - * - * Modified by: EQware Engineering, Inc. - * Oregon City, OR, USA 97045 - * - * Copyright: 2007, 2008 - * Vernier Software & Technology - * Beaverton, OR, USA 97005 - * - * Web: www.vernier.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - *****************************************************************************/ -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#define DRIVER_VERSION "VST USB Driver Version 1.5" -#define DRIVER_DESC "Vernier Software Technology Bulk USB Driver" - -#ifdef CONFIG_USB_DYNAMIC_MINORS - #define VSTUSB_MINOR_BASE 0 -#else - #define VSTUSB_MINOR_BASE 199 -#endif - -#define USB_VENDOR_OCEANOPTICS 0x2457 -#define USB_VENDOR_VERNIER 0x08F7 /* Vernier Software & Technology */ - -#define USB_PRODUCT_USB2000 0x1002 -#define USB_PRODUCT_ADC1000_FW 0x1003 /* firmware download (renumerates) */ -#define USB_PRODUCT_ADC1000 0x1004 -#define USB_PRODUCT_HR2000_FW 0x1009 /* firmware download (renumerates) */ -#define USB_PRODUCT_HR2000 0x100A -#define USB_PRODUCT_HR4000_FW 0x1011 /* firmware download (renumerates) */ -#define USB_PRODUCT_HR4000 0x1012 -#define USB_PRODUCT_USB650 0x1014 /* "Red Tide" */ -#define USB_PRODUCT_QE65000 0x1018 -#define USB_PRODUCT_USB4000 0x1022 -#define USB_PRODUCT_USB325 0x1024 /* "Vernier Spectrometer" */ - -#define USB_PRODUCT_LABPRO 0x0001 -#define USB_PRODUCT_LABQUEST 0x0005 - -#define VST_MAXBUFFER (64*1024) - -static const struct usb_device_id id_table[] = { - { USB_DEVICE(USB_VENDOR_OCEANOPTICS, USB_PRODUCT_USB2000)}, - { USB_DEVICE(USB_VENDOR_OCEANOPTICS, USB_PRODUCT_HR4000)}, - { USB_DEVICE(USB_VENDOR_OCEANOPTICS, USB_PRODUCT_USB650)}, - { USB_DEVICE(USB_VENDOR_OCEANOPTICS, USB_PRODUCT_USB4000)}, - { USB_DEVICE(USB_VENDOR_OCEANOPTICS, USB_PRODUCT_USB325)}, - { USB_DEVICE(USB_VENDOR_VERNIER, USB_PRODUCT_LABQUEST)}, - { USB_DEVICE(USB_VENDOR_VERNIER, USB_PRODUCT_LABPRO)}, - {}, -}; - -MODULE_DEVICE_TABLE(usb, id_table); - -struct vstusb_device { - struct kref kref; - struct mutex lock; - struct usb_device *usb_dev; - char present; - char isopen; - struct usb_anchor submitted; - int rd_pipe; - int rd_timeout_ms; - int wr_pipe; - int wr_timeout_ms; -}; -#define to_vst_dev(d) container_of(d, struct vstusb_device, kref) - -static struct usb_driver vstusb_driver; - -static void vstusb_delete(struct kref *kref) -{ - struct vstusb_device *vstdev = to_vst_dev(kref); - - usb_put_dev(vstdev->usb_dev); - kfree(vstdev); -} - -static int vstusb_open(struct inode *inode, struct file *file) -{ - struct vstusb_device *vstdev; - struct usb_interface *interface; - - interface = usb_find_interface(&vstusb_driver, iminor(inode)); - - if (!interface) { - printk(KERN_ERR KBUILD_MODNAME - ": %s - error, can't find device for minor %d\n", - __func__, iminor(inode)); - return -ENODEV; - } - - vstdev = usb_get_intfdata(interface); - - if (!vstdev) - return -ENODEV; - - /* lock this device */ - mutex_lock(&vstdev->lock); - - /* can only open one time */ - if ((!vstdev->present) || (vstdev->isopen)) { - mutex_unlock(&vstdev->lock); - return -EBUSY; - } - - /* increment our usage count */ - kref_get(&vstdev->kref); - - vstdev->isopen = 1; - - /* save device in the file's private structure */ - file->private_data = vstdev; - - dev_dbg(&vstdev->usb_dev->dev, "%s: opened\n", __func__); - - mutex_unlock(&vstdev->lock); - - return 0; -} - -static int vstusb_release(struct inode *inode, struct file *file) -{ - struct vstusb_device *vstdev; - - vstdev = file->private_data; - - if (vstdev == NULL) - return -ENODEV; - - mutex_lock(&vstdev->lock); - - vstdev->isopen = 0; - - dev_dbg(&vstdev->usb_dev->dev, "%s: released\n", __func__); - - mutex_unlock(&vstdev->lock); - - kref_put(&vstdev->kref, vstusb_delete); - - return 0; -} - -static void usb_api_blocking_completion(struct urb *urb) -{ - struct completion *completeit = urb->context; - - complete(completeit); -} - -static int vstusb_fill_and_send_urb(struct urb *urb, - struct usb_device *usb_dev, - unsigned int pipe, void *data, - unsigned int len, struct completion *done) -{ - struct usb_host_endpoint *ep; - struct usb_host_endpoint **hostep; - unsigned int pipend; - - int status; - - hostep = usb_pipein(pipe) ? usb_dev->ep_in : usb_dev->ep_out; - pipend = usb_pipeendpoint(pipe); - ep = hostep[pipend]; - - if (!ep || (len == 0)) - return -EINVAL; - - if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) - == USB_ENDPOINT_XFER_INT) { - pipe = (pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30); - usb_fill_int_urb(urb, usb_dev, pipe, data, len, - (usb_complete_t)usb_api_blocking_completion, - NULL, ep->desc.bInterval); - } else - usb_fill_bulk_urb(urb, usb_dev, pipe, data, len, - (usb_complete_t)usb_api_blocking_completion, - NULL); - - init_completion(done); - urb->context = done; - urb->actual_length = 0; - status = usb_submit_urb(urb, GFP_KERNEL); - - return status; -} - -static int vstusb_complete_urb(struct urb *urb, struct completion *done, - int timeout, int *actual_length) -{ - unsigned long expire; - int status; - - expire = timeout ? msecs_to_jiffies(timeout) : MAX_SCHEDULE_TIMEOUT; - if (!wait_for_completion_interruptible_timeout(done, expire)) { - usb_kill_urb(urb); - status = urb->status == -ENOENT ? -ETIMEDOUT : urb->status; - - dev_dbg(&urb->dev->dev, - "%s timed out on ep%d%s len=%d/%d, urb status = %d\n", - current->comm, - usb_pipeendpoint(urb->pipe), - usb_pipein(urb->pipe) ? "in" : "out", - urb->actual_length, - urb->transfer_buffer_length, - urb->status); - - } else { - if (signal_pending(current)) { - /* if really an error */ - if (urb->status && !((urb->status == -ENOENT) || - (urb->status == -ECONNRESET) || - (urb->status == -ESHUTDOWN))) { - status = -EINTR; - usb_kill_urb(urb); - } else { - status = 0; - } - - dev_dbg(&urb->dev->dev, - "%s: signal pending on ep%d%s len=%d/%d," - "urb status = %d\n", - current->comm, - usb_pipeendpoint(urb->pipe), - usb_pipein(urb->pipe) ? "in" : "out", - urb->actual_length, - urb->transfer_buffer_length, - urb->status); - - } else { - status = urb->status; - } - } - - if (actual_length) - *actual_length = urb->actual_length; - - return status; -} - -static ssize_t vstusb_read(struct file *file, char __user *buffer, - size_t count, loff_t *ppos) -{ - struct vstusb_device *vstdev; - int cnt = -1; - void *buf; - int retval = 0; - - struct urb *urb; - struct usb_device *dev; - unsigned int pipe; - int timeout; - - DECLARE_COMPLETION_ONSTACK(done); - - vstdev = file->private_data; - - if (vstdev == NULL) - return -ENODEV; - - /* verify that we actually want to read some data */ - if ((count == 0) || (count > VST_MAXBUFFER)) - return -EINVAL; - - /* lock this object */ - if (mutex_lock_interruptible(&vstdev->lock)) - return -ERESTARTSYS; - - /* anyone home */ - if (!vstdev->present) { - mutex_unlock(&vstdev->lock); - printk(KERN_ERR KBUILD_MODNAME - ": %s: device not present\n", __func__); - return -ENODEV; - } - - /* pull out the necessary data */ - dev = vstdev->usb_dev; - pipe = usb_rcvbulkpipe(dev, vstdev->rd_pipe); - timeout = vstdev->rd_timeout_ms; - - buf = kmalloc(count, GFP_KERNEL); - if (buf == NULL) { - mutex_unlock(&vstdev->lock); - return -ENOMEM; - } - - urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) { - kfree(buf); - mutex_unlock(&vstdev->lock); - return -ENOMEM; - } - - usb_anchor_urb(urb, &vstdev->submitted); - retval = vstusb_fill_and_send_urb(urb, dev, pipe, buf, count, &done); - mutex_unlock(&vstdev->lock); - if (retval) { - usb_unanchor_urb(urb); - dev_err(&dev->dev, "%s: error %d filling and sending urb %d\n", - __func__, retval, pipe); - goto exit; - } - - retval = vstusb_complete_urb(urb, &done, timeout, &cnt); - if (retval) { - dev_err(&dev->dev, "%s: error %d completing urb %d\n", - __func__, retval, pipe); - goto exit; - } - - if (copy_to_user(buffer, buf, cnt)) { - dev_err(&dev->dev, "%s: can't copy_to_user\n", __func__); - retval = -EFAULT; - } else { - retval = cnt; - dev_dbg(&dev->dev, "%s: read %d bytes from pipe %d\n", - __func__, cnt, pipe); - } - -exit: - usb_free_urb(urb); - kfree(buf); - return retval; -} - -static ssize_t vstusb_write(struct file *file, const char __user *buffer, - size_t count, loff_t *ppos) -{ - struct vstusb_device *vstdev; - int cnt = -1; - void *buf; - int retval = 0; - - struct urb *urb; - struct usb_device *dev; - unsigned int pipe; - int timeout; - - DECLARE_COMPLETION_ONSTACK(done); - - vstdev = file->private_data; - - if (vstdev == NULL) - return -ENODEV; - - /* verify that we actually have some data to write */ - if ((count == 0) || (count > VST_MAXBUFFER)) - return retval; - - /* lock this object */ - if (mutex_lock_interruptible(&vstdev->lock)) - return -ERESTARTSYS; - - /* anyone home */ - if (!vstdev->present) { - mutex_unlock(&vstdev->lock); - printk(KERN_ERR KBUILD_MODNAME - ": %s: device not present\n", __func__); - return -ENODEV; - } - - /* pull out the necessary data */ - dev = vstdev->usb_dev; - pipe = usb_sndbulkpipe(dev, vstdev->wr_pipe); - timeout = vstdev->wr_timeout_ms; - - buf = kmalloc(count, GFP_KERNEL); - if (buf == NULL) { - mutex_unlock(&vstdev->lock); - return -ENOMEM; - } - - urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) { - kfree(buf); - mutex_unlock(&vstdev->lock); - return -ENOMEM; - } - - if (copy_from_user(buf, buffer, count)) { - mutex_unlock(&vstdev->lock); - dev_err(&dev->dev, "%s: can't copy_from_user\n", __func__); - retval = -EFAULT; - goto exit; - } - - usb_anchor_urb(urb, &vstdev->submitted); - retval = vstusb_fill_and_send_urb(urb, dev, pipe, buf, count, &done); - mutex_unlock(&vstdev->lock); - if (retval) { - usb_unanchor_urb(urb); - dev_err(&dev->dev, "%s: error %d filling and sending urb %d\n", - __func__, retval, pipe); - goto exit; - } - - retval = vstusb_complete_urb(urb, &done, timeout, &cnt); - if (retval) { - dev_err(&dev->dev, "%s: error %d completing urb %d\n", - __func__, retval, pipe); - goto exit; - } else { - retval = cnt; - dev_dbg(&dev->dev, "%s: sent %d bytes to pipe %d\n", - __func__, cnt, pipe); - } - -exit: - usb_free_urb(urb); - kfree(buf); - return retval; -} - -static long vstusb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -{ - int retval = 0; - int cnt = -1; - void __user *data = (void __user *)arg; - struct vstusb_args usb_data; - - struct vstusb_device *vstdev; - void *buffer = NULL; /* must be initialized. buffer is - * referenced on exit but not all - * ioctls allocate it */ - - struct urb *urb = NULL; /* must be initialized. urb is - * referenced on exit but not all - * ioctls allocate it */ - struct usb_device *dev; - unsigned int pipe; - int timeout; - - DECLARE_COMPLETION_ONSTACK(done); - - vstdev = file->private_data; - - if (_IOC_TYPE(cmd) != VST_IOC_MAGIC) { - dev_warn(&vstdev->usb_dev->dev, - "%s: ioctl command %x, bad ioctl magic %x, " - "expected %x\n", __func__, cmd, - _IOC_TYPE(cmd), VST_IOC_MAGIC); - return -EINVAL; - } - - if (vstdev == NULL) - return -ENODEV; - - if (copy_from_user(&usb_data, data, sizeof(struct vstusb_args))) { - dev_err(&vstdev->usb_dev->dev, "%s: can't copy_from_user\n", - __func__); - return -EFAULT; - } - - /* lock this object */ - if (mutex_lock_interruptible(&vstdev->lock)) { - retval = -ERESTARTSYS; - goto exit; - } - - /* anyone home */ - if (!vstdev->present) { - mutex_unlock(&vstdev->lock); - dev_err(&vstdev->usb_dev->dev, "%s: device not present\n", - __func__); - retval = -ENODEV; - goto exit; - } - - /* pull out the necessary data */ - dev = vstdev->usb_dev; - - switch (cmd) { - - case IOCTL_VSTUSB_CONFIG_RW: - - vstdev->rd_pipe = usb_data.rd_pipe; - vstdev->rd_timeout_ms = usb_data.rd_timeout_ms; - vstdev->wr_pipe = usb_data.wr_pipe; - vstdev->wr_timeout_ms = usb_data.wr_timeout_ms; - - mutex_unlock(&vstdev->lock); - - dev_dbg(&dev->dev, "%s: setting pipes/timeouts, " - "rdpipe = %d, rdtimeout = %d, " - "wrpipe = %d, wrtimeout = %d\n", __func__, - vstdev->rd_pipe, vstdev->rd_timeout_ms, - vstdev->wr_pipe, vstdev->wr_timeout_ms); - break; - - case IOCTL_VSTUSB_SEND_PIPE: - - if ((usb_data.count == 0) || (usb_data.count > VST_MAXBUFFER)) { - mutex_unlock(&vstdev->lock); - retval = -EINVAL; - goto exit; - } - - buffer = kmalloc(usb_data.count, GFP_KERNEL); - if (buffer == NULL) { - mutex_unlock(&vstdev->lock); - retval = -ENOMEM; - goto exit; - } - - urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) { - mutex_unlock(&vstdev->lock); - retval = -ENOMEM; - goto exit; - } - - timeout = usb_data.timeout_ms; - - pipe = usb_sndbulkpipe(dev, usb_data.pipe); - - if (copy_from_user(buffer, usb_data.buffer, usb_data.count)) { - dev_err(&dev->dev, "%s: can't copy_from_user\n", - __func__); - mutex_unlock(&vstdev->lock); - retval = -EFAULT; - goto exit; - } - - usb_anchor_urb(urb, &vstdev->submitted); - retval = vstusb_fill_and_send_urb(urb, dev, pipe, buffer, - usb_data.count, &done); - mutex_unlock(&vstdev->lock); - if (retval) { - usb_unanchor_urb(urb); - dev_err(&dev->dev, - "%s: error %d filling and sending urb %d\n", - __func__, retval, pipe); - goto exit; - } - - retval = vstusb_complete_urb(urb, &done, timeout, &cnt); - if (retval) { - dev_err(&dev->dev, "%s: error %d completing urb %d\n", - __func__, retval, pipe); - } - - break; - case IOCTL_VSTUSB_RECV_PIPE: - - if ((usb_data.count == 0) || (usb_data.count > VST_MAXBUFFER)) { - mutex_unlock(&vstdev->lock); - retval = -EINVAL; - goto exit; - } - - buffer = kmalloc(usb_data.count, GFP_KERNEL); - if (buffer == NULL) { - mutex_unlock(&vstdev->lock); - retval = -ENOMEM; - goto exit; - } - - urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) { - mutex_unlock(&vstdev->lock); - retval = -ENOMEM; - goto exit; - } - - timeout = usb_data.timeout_ms; - - pipe = usb_rcvbulkpipe(dev, usb_data.pipe); - - usb_anchor_urb(urb, &vstdev->submitted); - retval = vstusb_fill_and_send_urb(urb, dev, pipe, buffer, - usb_data.count, &done); - mutex_unlock(&vstdev->lock); - if (retval) { - usb_unanchor_urb(urb); - dev_err(&dev->dev, - "%s: error %d filling and sending urb %d\n", - __func__, retval, pipe); - goto exit; - } - - retval = vstusb_complete_urb(urb, &done, timeout, &cnt); - if (retval) { - dev_err(&dev->dev, "%s: error %d completing urb %d\n", - __func__, retval, pipe); - goto exit; - } - - if (copy_to_user(usb_data.buffer, buffer, cnt)) { - dev_err(&dev->dev, "%s: can't copy_to_user\n", - __func__); - retval = -EFAULT; - goto exit; - } - - usb_data.count = cnt; - if (copy_to_user(data, &usb_data, sizeof(struct vstusb_args))) { - dev_err(&dev->dev, "%s: can't copy_to_user\n", - __func__); - retval = -EFAULT; - } else { - dev_dbg(&dev->dev, "%s: recv %zd bytes from pipe %d\n", - __func__, usb_data.count, usb_data.pipe); - } - - break; - - default: - mutex_unlock(&vstdev->lock); - dev_warn(&dev->dev, "ioctl_vstusb: invalid ioctl cmd %x\n", - cmd); - return -EINVAL; - break; - } -exit: - usb_free_urb(urb); - kfree(buffer); - return retval; -} - -static const struct file_operations vstusb_fops = { - .owner = THIS_MODULE, - .read = vstusb_read, - .write = vstusb_write, - .unlocked_ioctl = vstusb_ioctl, - .compat_ioctl = vstusb_ioctl, - .open = vstusb_open, - .release = vstusb_release, -}; - -static struct usb_class_driver usb_vstusb_class = { - .name = "usb/vstusb%d", - .fops = &vstusb_fops, - .minor_base = VSTUSB_MINOR_BASE, -}; - -static int vstusb_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct usb_device *dev = interface_to_usbdev(intf); - struct vstusb_device *vstdev; - int i; - int retval = 0; - - /* allocate memory for our device state and intialize it */ - - vstdev = kzalloc(sizeof(*vstdev), GFP_KERNEL); - if (vstdev == NULL) - return -ENOMEM; - - /* must do usb_get_dev() prior to kref_init() since the kref_put() - * release function will do a usb_put_dev() */ - usb_get_dev(dev); - kref_init(&vstdev->kref); - mutex_init(&vstdev->lock); - - i = dev->descriptor.bcdDevice; - - dev_dbg(&intf->dev, "Version %1d%1d.%1d%1d found at address %d\n", - (i & 0xF000) >> 12, (i & 0xF00) >> 8, - (i & 0xF0) >> 4, (i & 0xF), dev->devnum); - - vstdev->present = 1; - vstdev->isopen = 0; - vstdev->usb_dev = dev; - init_usb_anchor(&vstdev->submitted); - - usb_set_intfdata(intf, vstdev); - retval = usb_register_dev(intf, &usb_vstusb_class); - if (retval) { - dev_err(&intf->dev, - "%s: Not able to get a minor for this device.\n", - __func__); - usb_set_intfdata(intf, NULL); - kref_put(&vstdev->kref, vstusb_delete); - return retval; - } - - /* let the user know what node this device is now attached to */ - dev_info(&intf->dev, - "VST USB Device #%d now attached to major %d minor %d\n", - (intf->minor - VSTUSB_MINOR_BASE), USB_MAJOR, intf->minor); - - dev_info(&intf->dev, "%s, %s\n", DRIVER_DESC, DRIVER_VERSION); - - return retval; -} - -static void vstusb_disconnect(struct usb_interface *intf) -{ - struct vstusb_device *vstdev = usb_get_intfdata(intf); - - usb_deregister_dev(intf, &usb_vstusb_class); - usb_set_intfdata(intf, NULL); - - if (vstdev) { - - mutex_lock(&vstdev->lock); - vstdev->present = 0; - - usb_kill_anchored_urbs(&vstdev->submitted); - - mutex_unlock(&vstdev->lock); - - kref_put(&vstdev->kref, vstusb_delete); - } - -} - -static int vstusb_suspend(struct usb_interface *intf, pm_message_t message) -{ - struct vstusb_device *vstdev = usb_get_intfdata(intf); - int time; - if (!vstdev) - return 0; - - mutex_lock(&vstdev->lock); - time = usb_wait_anchor_empty_timeout(&vstdev->submitted, 1000); - if (!time) - usb_kill_anchored_urbs(&vstdev->submitted); - mutex_unlock(&vstdev->lock); - - return 0; -} - -static int vstusb_resume(struct usb_interface *intf) -{ - return 0; -} - -static struct usb_driver vstusb_driver = { - .name = "vstusb", - .probe = vstusb_probe, - .disconnect = vstusb_disconnect, - .suspend = vstusb_suspend, - .resume = vstusb_resume, - .id_table = id_table, -}; - -static int __init vstusb_init(void) -{ - int rc; - - rc = usb_register(&vstusb_driver); - if (rc) - printk(KERN_ERR "%s: failed to register (%d)", __func__, rc); - - return rc; -} - -static void __exit vstusb_exit(void) -{ - usb_deregister(&vstusb_driver); -} - -module_init(vstusb_init); -module_exit(vstusb_exit); - -MODULE_AUTHOR("Dennis O'Brien/Stephen Ware"); -MODULE_DESCRIPTION(DRIVER_VERSION); -MODULE_LICENSE("GPL"); diff --git a/include/linux/usb/Kbuild b/include/linux/usb/Kbuild index 54c4463..29fd73b 100644 --- a/include/linux/usb/Kbuild +++ b/include/linux/usb/Kbuild @@ -5,4 +5,3 @@ header-y += gadgetfs.h header-y += midi.h header-y += g_printer.h header-y += tmc.h -header-y += vstusb.h diff --git a/include/linux/usb/vstusb.h b/include/linux/usb/vstusb.h deleted file mode 100644 index 1cfac67..0000000 --- a/include/linux/usb/vstusb.h +++ /dev/null @@ -1,71 +0,0 @@ -/***************************************************************************** - * File: drivers/usb/misc/vstusb.h - * - * Purpose: Support for the bulk USB Vernier Spectrophotometers - * - * Author: EQware Engineering, Inc. - * Oregon City, OR, USA 97045 - * - * Copyright: 2007, 2008 - * Vernier Software & Technology - * Beaverton, OR, USA 97005 - * - * Web: www.vernier.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - *****************************************************************************/ -/***************************************************************************** - * - * The vstusb module is a standard usb 'client' driver running on top of the - * standard usb host controller stack. - * - * In general, vstusb supports standard bulk usb pipes. It supports multiple - * devices and multiple pipes per device. - * - * The vstusb driver supports two interfaces: - * 1 - ioctl SEND_PIPE/RECV_PIPE - a general bulk write/read msg - * interface to any pipe with timeout support; - * 2 - standard read/write with ioctl config - offers standard read/write - * interface with ioctl configured pipes and timeouts. - * - * Both interfaces can be signal from other process and will abort its i/o - * operation. - * - * A timeout of 0 means NO timeout. The user can still terminate the read via - * signal. - * - * If using multiple threads with this driver, the user should ensure that - * any reads, writes, or ioctls are complete before closing the device. - * Changing read/write timeouts or pipes takes effect on next read/write. - * - *****************************************************************************/ - -struct vstusb_args { - union { - /* this struct is used for IOCTL_VSTUSB_SEND_PIPE, * - * IOCTL_VSTUSB_RECV_PIPE, and read()/write() fops */ - struct { - void __user *buffer; - size_t count; - unsigned int timeout_ms; - int pipe; - }; - - /* this one is used for IOCTL_VSTUSB_CONFIG_RW */ - struct { - int rd_pipe; - int rd_timeout_ms; - int wr_pipe; - int wr_timeout_ms; - }; - }; -}; - -#define VST_IOC_MAGIC 'L' -#define VST_IOC_FIRST 0x20 -#define IOCTL_VSTUSB_SEND_PIPE _IO(VST_IOC_MAGIC, VST_IOC_FIRST) -#define IOCTL_VSTUSB_RECV_PIPE _IO(VST_IOC_MAGIC, VST_IOC_FIRST + 1) -#define IOCTL_VSTUSB_CONFIG_RW _IO(VST_IOC_MAGIC, VST_IOC_FIRST + 2) -- cgit v0.10.2 From 5d3034ab8faea229942e79d867d18722d5375b12 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 17 Feb 2010 11:50:26 +0100 Subject: USB: storage: fix misplaced parenthesis Due to a misplaced parenthesis the usbat_write_block() return value was not stored, but a boolean. USB_STOR_TRANSPORT_NO_SENSE and USB_STOR_TRANSPORT_ERROR were returned as USB_STOR_TRANSPORT_FAILED. Signed-off-by: Roel Kluin Cc: Joe Perches Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c index b62a288..bd3f415 100644 --- a/drivers/usb/storage/shuttle_usbat.c +++ b/drivers/usb/storage/shuttle_usbat.c @@ -1628,10 +1628,10 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us) return USB_STOR_TRANSPORT_ERROR; } - if ( (result = usbat_multiple_write(us, - registers, data, 7)) != USB_STOR_TRANSPORT_GOOD) { + result = usbat_multiple_write(us, registers, data, 7); + + if (result != USB_STOR_TRANSPORT_GOOD) return result; - } /* * Write the 12-byte command header. @@ -1643,12 +1643,11 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us) * AT SPEED 4 IS UNRELIABLE!!! */ - if ((result = usbat_write_block(us, - USBAT_ATA, srb->cmnd, 12, - (srb->cmnd[0]==GPCMD_BLANK ? 75 : 10), 0) != - USB_STOR_TRANSPORT_GOOD)) { + result = usbat_write_block(us, USBAT_ATA, srb->cmnd, 12, + srb->cmnd[0] == GPCMD_BLANK ? 75 : 10, 0); + + if (result != USB_STOR_TRANSPORT_GOOD) return result; - } /* If there is response data to be read in then do it here. */ -- cgit v0.10.2 From 67ccbd6f1af3025af3224be5c4f992aaf8811334 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 17 Feb 2010 13:06:57 +0000 Subject: USB: tty: sort out the request_room handling for whiteheat This driver has its own (surplus) backup queue system which wants removing from the receive overflow logic. Do this at the same time as removing the request_room logic Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index e89e0d5..12ed820 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -1492,21 +1492,9 @@ static void rx_data_softint(struct work_struct *work) wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); urb = wrap->urb; - if (tty && urb->actual_length) { - int len = tty_buffer_request_room(tty, - urb->actual_length); - /* This stuff can go away now I suspect */ - if (unlikely(len < urb->actual_length)) { - spin_lock_irqsave(&info->lock, flags); - list_add(tmp, &info->rx_urb_q); - spin_unlock_irqrestore(&info->lock, flags); - tty_flip_buffer_push(tty); - schedule_work(&info->rx_work); - goto out; - } - tty_insert_flip_string(tty, urb->transfer_buffer, len); - sent += len; - } + if (tty && urb->actual_length) + sent += tty_insert_flip_string(tty, + urb->transfer_buffer, urb->actual_length); urb->dev = port->serial->dev; result = usb_submit_urb(urb, GFP_ATOMIC); -- cgit v0.10.2 From b6a2f10ca045c9b0a4732c38485ad6ca1b663bf4 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 17 Feb 2010 13:07:05 +0000 Subject: USB: tty: kill request_room for USB ACM class Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index b97f930..975d556 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -428,7 +428,6 @@ next_buffer: throttled = acm->throttle; spin_unlock_irqrestore(&acm->throttle_lock, flags); if (!throttled) { - tty_buffer_request_room(tty, buf->size); tty_insert_flip_string(tty, buf->base, buf->size); tty_flip_buffer_push(tty); } else { -- cgit v0.10.2 From e4a3d94658b5760fc947d7f7185c57db47ca362a Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 18 Feb 2010 02:36:23 +0100 Subject: USB: don't read past config->interface[] if usb_control_msg() fails in usb_reset_configuration() While looping over the interfaces, if usb_hcd_alloc_bandwidth() fails it calls hcd->driver->reset_bandwidth(), so there was no need to reinstate the interface again. If no break occurred, the index equals config->desc.bNumInterfaces. A subsequent usb_control_msg() failure resulted in a read from config->interface[config->desc.bNumInterfaces] at label reset_old_alts. In either case the last interface should be skipped. Signed-off-by: Roel Kluin Acked-by: Alan Stern Acked-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index e5d5a26..cd22027 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1471,7 +1471,7 @@ int usb_reset_configuration(struct usb_device *dev) /* If not, reinstate the old alternate settings */ if (retval < 0) { reset_old_alts: - for (; i >= 0; i--) { + for (i--; i >= 0; i--) { struct usb_interface *intf = config->interface[i]; struct usb_host_interface *alt; -- cgit v0.10.2 From 2832fc11f1360668482beec06dbcd631ae5f0cf1 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 18 Feb 2010 16:43:54 +0000 Subject: USB: tty: Add a function to insert a string of characters with the same flag The USB drivers often want to insert a series of bytes all with the same flag set - provide a helper for this case. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/tty_buffer.c b/drivers/char/tty_buffer.c index 66fa4e1..4c13345 100644 --- a/drivers/char/tty_buffer.c +++ b/drivers/char/tty_buffer.c @@ -231,9 +231,10 @@ int tty_buffer_request_room(struct tty_struct *tty, size_t size) EXPORT_SYMBOL_GPL(tty_buffer_request_room); /** - * tty_insert_flip_string - Add characters to the tty buffer + * tty_insert_flip_string_fixed_flag - Add characters to the tty buffer * @tty: tty structure * @chars: characters + * @flag: flag value for each character * @size: size * * Queue a series of bytes to the tty buffering. All the characters @@ -242,8 +243,8 @@ EXPORT_SYMBOL_GPL(tty_buffer_request_room); * Locking: Called functions may take tty->buf.lock */ -int tty_insert_flip_string(struct tty_struct *tty, const unsigned char *chars, - size_t size) +int tty_insert_flip_string_fixed_flag(struct tty_struct *tty, + const unsigned char *chars, char flag, size_t size) { int copied = 0; do { @@ -253,7 +254,7 @@ int tty_insert_flip_string(struct tty_struct *tty, const unsigned char *chars, if (unlikely(space == 0)) break; memcpy(tb->char_buf_ptr + tb->used, chars, space); - memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space); + memset(tb->flag_buf_ptr + tb->used, flag, space); tb->used += space; copied += space; chars += space; @@ -262,7 +263,7 @@ int tty_insert_flip_string(struct tty_struct *tty, const unsigned char *chars, } while (unlikely(size > copied)); return copied; } -EXPORT_SYMBOL(tty_insert_flip_string); +EXPORT_SYMBOL(tty_insert_flip_string_fixed_flag); /** * tty_insert_flip_string_flags - Add characters to the tty buffer diff --git a/include/linux/tty_flip.h b/include/linux/tty_flip.h index eb677cf..9239d03 100644 --- a/include/linux/tty_flip.h +++ b/include/linux/tty_flip.h @@ -2,8 +2,8 @@ #define _LINUX_TTY_FLIP_H extern int tty_buffer_request_room(struct tty_struct *tty, size_t size); -extern int tty_insert_flip_string(struct tty_struct *tty, const unsigned char *chars, size_t size); extern int tty_insert_flip_string_flags(struct tty_struct *tty, const unsigned char *chars, const char *flags, size_t size); +extern int tty_insert_flip_string_fixed_flag(struct tty_struct *tty, const unsigned char *chars, char flag, size_t size); extern int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars, size_t size); extern int tty_prepare_flip_string_flags(struct tty_struct *tty, unsigned char **chars, char **flags, size_t size); void tty_schedule_flip(struct tty_struct *tty); @@ -20,4 +20,9 @@ static inline int tty_insert_flip_char(struct tty_struct *tty, return tty_insert_flip_string_flags(tty, &ch, &flag, 1); } +static inline int tty_insert_flip_string(struct tty_struct *tty, const unsigned char *chars, size_t size) +{ + return tty_insert_flip_string_fixed_flag(tty, chars, TTY_NORMAL, size); +} + #endif /* _LINUX_TTY_FLIP_H */ -- cgit v0.10.2 From a108bfcb372d8c4452701039308fb95747911c59 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 18 Feb 2010 16:44:01 +0000 Subject: USB: tty: Prune uses of tty_request_room in the USB layer We have lots of callers that do not need to do this in the first place. Remove the calls as they both cost CPU and for big buffers can mess up the multi-page allocation avoidance. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 1f75fac..547c944 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -733,7 +733,6 @@ static void ark3116_read_bulk_callback(struct urb *urb) tty = tty_port_tty_get(&port->port); if (tty) { - tty_buffer_request_room(tty, urb->actual_length + 1); /* overrun is special, not associated with a char */ if (unlikely(lsr & UART_LSR_OE)) tty_insert_flip_char(tty, 0, TTY_OVERRUN); diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 036f999..f744ab7 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -395,7 +395,6 @@ static void cyberjack_read_bulk_callback(struct urb *urb) return; } if (urb->actual_length) { - tty_buffer_request_room(tty, urb->actual_length); tty_insert_flip_string(tty, data, urb->actual_length); tty_flip_buffer_push(tty); } diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index c349f79..3a5d57f 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -1307,13 +1307,9 @@ static void cypress_read_int_callback(struct urb *urb) spin_unlock_irqrestore(&priv->lock, flags); /* process read if there is data other than line status */ - if (tty && (bytes > i)) { - bytes = tty_buffer_request_room(tty, bytes); - for (; i < bytes ; ++i) { - dbg("pushing byte number %d - %d - %c", i, data[i], - data[i]); - tty_insert_flip_char(tty, data[i], tty_flag); - } + if (tty && bytes > i) { + tty_insert_flip_string_fixed_flag(tty, data + i, + bytes - i, tty_flag); tty_flip_buffer_push(tty); } diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 3b63484..3817228 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -1658,7 +1658,6 @@ static int digi_read_inb_callback(struct urb *urb) int port_status = ((unsigned char *)urb->transfer_buffer)[2]; unsigned char *data = ((unsigned char *)urb->transfer_buffer) + 3; int flag, throttled; - int i; int status = urb->status; /* do not process callbacks on closed ports */ @@ -1705,17 +1704,9 @@ static int digi_read_inb_callback(struct urb *urb) /* data length is len-1 (one byte of len is port_status) */ --len; - - len = tty_buffer_request_room(tty, len); if (len > 0) { - /* Hot path */ - if (flag == TTY_NORMAL) - tty_insert_flip_string(tty, data, len); - else { - for (i = 0; i < len; i++) - tty_insert_flip_char(tty, - data[i], flag); - } + tty_insert_flip_string_fixed_flag(tty, data, len, + flag); tty_flip_buffer_push(tty); } } diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index d02e604..5f740a1 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -346,7 +346,6 @@ static void empeg_read_bulk_callback(struct urb *urb) tty = tty_port_tty_get(&port->port); if (urb->actual_length) { - tty_buffer_request_room(tty, urb->actual_length); tty_insert_flip_string(tty, data, urb->actual_length); tty_flip_buffer_push(tty); bytes_in += urb->actual_length; diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 6bbedfb..a42b29a 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -271,7 +271,6 @@ static void send_to_tty(struct usb_serial_port *port, usb_serial_debug_data(debug, &port->dev, __func__, actual_length, data); - tty_buffer_request_room(tty, actual_length); tty_insert_flip_string(tty, data, actual_length); tty_flip_buffer_push(tty); } diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 66fb58f..3ef8df0 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -2055,18 +2055,13 @@ static void edge_tty_recv(struct device *dev, struct tty_struct *tty, { int cnt; - do { - cnt = tty_buffer_request_room(tty, length); - if (cnt < length) { - dev_err(dev, "%s - dropping data, %d bytes lost\n", - __func__, length - cnt); - if (cnt == 0) - break; - } - tty_insert_flip_string(tty, data, cnt); - data += cnt; - length -= cnt; - } while (length > 0); + cnt = tty_insert_flip_string(tty, data, length); + if (cnt < length) { + dev_err(dev, "%s - dropping data, %d bytes lost\n", + __func__, length - cnt); + } + data += cnt; + length -= cnt; tty_flip_buffer_push(tty); } diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 98e5045..aa876f7 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -1820,7 +1820,6 @@ static void edge_tty_recv(struct device *dev, struct tty_struct *tty, { int queued; - tty_buffer_request_room(tty, length); queued = tty_insert_flip_string(tty, data, length); if (queued < length) dev_err(dev, "%s - dropping data, %d bytes lost\n", diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index d6231c3..3fea929 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -747,7 +747,6 @@ static void ipaq_read_bulk_callback(struct urb *urb) tty = tty_port_tty_get(&port->port); if (tty && urb->actual_length) { - tty_buffer_request_room(tty, urb->actual_length); tty_insert_flip_string(tty, data, urb->actual_length); tty_flip_buffer_push(tty); bytes_in += urb->actual_length; diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index c0afa7a..e1d0784 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -172,7 +172,6 @@ static void ipw_read_bulk_callback(struct urb *urb) tty = tty_port_tty_get(&port->port); if (tty && urb->actual_length) { - tty_buffer_request_room(tty, urb->actual_length); tty_insert_flip_string(tty, data, urb->actual_length); tty_flip_buffer_push(tty); } diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index fc2ab81..c3e5d50 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -462,10 +462,8 @@ static void ir_read_bulk_callback(struct urb *urb) usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); tty = tty_port_tty_get(&port->port); - if (tty_buffer_request_room(tty, urb->actual_length - 1)) { - tty_insert_flip_string(tty, data+1, urb->actual_length - 1); - tty_flip_buffer_push(tty); - } + tty_insert_flip_string(tty, data+1, urb->actual_length - 1); + tty_flip_buffer_push(tty); tty_kref_put(tty); /* diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 2dbe22a..8eef91b 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -699,7 +699,6 @@ static void klsi_105_read_bulk_callback(struct urb *urb) bytes_sent = urb->actual_length - 2; } - tty_buffer_request_room(tty, bytes_sent); tty_insert_flip_string(tty, data + 2, bytes_sent); tty_flip_buffer_push(tty); tty_kref_put(tty); diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index fc78553..c113a2a 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -388,7 +388,6 @@ static void kobil_read_int_callback(struct urb *urb) */ /* END DEBUG */ - tty_buffer_request_room(tty, urb->actual_length); tty_insert_flip_string(tty, data, urb->actual_length); tty_flip_buffer_push(tty); } diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 546b29f..0d47f2c 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -290,7 +290,6 @@ static void mos7720_bulk_in_callback(struct urb *urb) tty = tty_port_tty_get(&port->port); if (tty && urb->actual_length) { - tty_buffer_request_room(tty, urb->actual_length); tty_insert_flip_string(tty, data, urb->actual_length); tty_flip_buffer_push(tty); } diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index c89a89c..2fda1c0 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -764,7 +764,6 @@ static void mos7840_bulk_in_callback(struct urb *urb) if (urb->actual_length) { tty = tty_port_tty_get(&mos7840_port->port->port); if (tty) { - tty_buffer_request_room(tty, urb->actual_length); tty_insert_flip_string(tty, data, urb->actual_length); dbg(" %s ", data); tty_flip_buffer_push(tty); diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c index efa61bc..04a6cbb 100644 --- a/drivers/usb/serial/navman.c +++ b/drivers/usb/serial/navman.c @@ -66,7 +66,6 @@ static void navman_read_int_callback(struct urb *urb) tty = tty_port_tty_get(&port->port); if (tty && urb->actual_length) { - tty_buffer_request_room(tty, urb->actual_length); tty_insert_flip_string(tty, data, urb->actual_length); tty_flip_buffer_push(tty); } diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 7732866..f37476e 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -55,7 +55,6 @@ static void opticon_bulk_callback(struct urb *urb) int status = urb->status; struct tty_struct *tty; int result; - int available_room = 0; int data_length; dbg("%s - port %d", __func__, port->number); @@ -96,13 +95,9 @@ static void opticon_bulk_callback(struct urb *urb) /* real data, send it to the tty layer */ tty = tty_port_tty_get(&port->port); if (tty) { - available_room = tty_buffer_request_room(tty, - data_length); - if (available_room) { - tty_insert_flip_string(tty, data, - available_room); - tty_flip_buffer_push(tty); - } + tty_insert_flip_string(tty, data, + data_length); + tty_flip_buffer_push(tty); tty_kref_put(tty); } } else { diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index f6646b3..68c7457 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -964,7 +964,6 @@ static void option_indat_callback(struct urb *urb) } else { tty = tty_port_tty_get(&port->port); if (urb->actual_length) { - tty_buffer_request_room(tty, urb->actual_length); tty_insert_flip_string(tty, data, urb->actual_length); tty_flip_buffer_push(tty); } else diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 767000c..a3e5a56 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -1042,7 +1042,6 @@ static void pl2303_push_data(struct tty_struct *tty, tty_flag = TTY_FRAME; dbg("%s - tty_flag = %d", __func__, tty_flag); - tty_buffer_request_room(tty, urb->actual_length + 1); /* overrun is special, not associated with a char */ if (line_status & UART_OVERRUN_ERROR) tty_insert_flip_char(tty, 0, TTY_OVERRUN); diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index fcec466..c012e51 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -595,8 +595,6 @@ static void sierra_indat_callback(struct urb *urb) if (urb->actual_length) { tty = tty_port_tty_get(&port->port); if (tty) { - tty_buffer_request_room(tty, - urb->actual_length); tty_insert_flip_string(tty, data, urb->actual_length); tty_flip_buffer_push(tty); diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 067e95a..cf508e2 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -677,7 +677,6 @@ static void spcp8x5_read_bulk_callback(struct urb *urb) struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; unsigned long flags; - int i; int result = urb->status; u8 status; char tty_flag; @@ -726,12 +725,11 @@ static void spcp8x5_read_bulk_callback(struct urb *urb) tty = tty_port_tty_get(&port->port); if (tty && urb->actual_length) { - tty_buffer_request_room(tty, urb->actual_length + 1); /* overrun is special, not associated with a char */ if (status & UART_OVERRUN_ERROR) tty_insert_flip_char(tty, 0, TTY_OVERRUN); - for (i = 0; i < urb->actual_length; ++i) - tty_insert_flip_char(tty, data[i], tty_flag); + tty_insert_flip_string_fixed_flag(tty, data, + urb->actual_length, tty_flag); tty_flip_buffer_push(tty); } tty_kref_put(tty); diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c index 1a76bc5..7239888 100644 --- a/drivers/usb/serial/symbolserial.c +++ b/drivers/usb/serial/symbolserial.c @@ -51,7 +51,6 @@ static void symbol_int_callback(struct urb *urb) int status = urb->status; struct tty_struct *tty; int result; - int available_room = 0; int data_length; dbg("%s - port %d", __func__, port->number); @@ -89,13 +88,8 @@ static void symbol_int_callback(struct urb *urb) */ tty = tty_port_tty_get(&port->port); if (tty) { - available_room = tty_buffer_request_room(tty, - data_length); - if (available_room) { - tty_insert_flip_string(tty, &data[1], - available_room); - tty_flip_buffer_push(tty); - } + tty_insert_flip_string(tty, &data[1], data_length); + tty_flip_buffer_push(tty); tty_kref_put(tty); } } else { diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 1e9dc88..0afe5c7 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -1271,14 +1271,13 @@ static void ti_recv(struct device *dev, struct tty_struct *tty, int cnt; do { - cnt = tty_buffer_request_room(tty, length); + cnt = tty_insert_flip_string(tty, data, length); if (cnt < length) { dev_err(dev, "%s - dropping data, %d bytes lost\n", __func__, length - cnt); if (cnt == 0) break; } - tty_insert_flip_string(tty, data, cnt); tty_flip_buffer_push(tty); data += cnt; length -= cnt; diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 4f7945e..0949427 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -503,13 +503,9 @@ static void visor_read_bulk_callback(struct urb *urb) if (urb->actual_length) { tty = tty_port_tty_get(&port->port); if (tty) { - available_room = tty_buffer_request_room(tty, - urb->actual_length); - if (available_room) { - tty_insert_flip_string(tty, data, - available_room); - tty_flip_buffer_push(tty); - } + tty_insert_flip_string(tty, data, + urb->actual_length); + tty_flip_buffer_push(tty); tty_kref_put(tty); } spin_lock(&priv->lock); -- cgit v0.10.2 From 1f87158e44e79e62c8250f278c225ce4ab695f4b Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 17 Feb 2010 10:05:47 -0500 Subject: USB: remove references to port->port.count from the serial drivers This patch (as1344) removes references to port->port.count from the USB serial drivers. Now that serial ports are properly reference counted, port.count checking is unnecessary and incorrect. Drivers should assume that the port is in use from the time the open method runs until the close method is called. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index 2cbdc8f..365db10 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -468,10 +468,6 @@ static void aircable_read_bulk_callback(struct urb *urb) if (status) { dbg("%s - urb status = %d", __func__, status); - if (!port->port.count) { - dbg("%s - port is closed, exiting.", __func__); - return; - } if (status == -EPROTO) { dbg("%s - caught -EPROTO, resubmitting the urb", __func__); @@ -530,23 +526,19 @@ static void aircable_read_bulk_callback(struct urb *urb) } tty_kref_put(tty); - /* Schedule the next read _if_ we are still open */ - if (port->port.count) { - usb_fill_bulk_urb(port->read_urb, port->serial->dev, - usb_rcvbulkpipe(port->serial->dev, - port->bulk_in_endpointAddress), - port->read_urb->transfer_buffer, - port->read_urb->transfer_buffer_length, - aircable_read_bulk_callback, port); - - result = usb_submit_urb(urb, GFP_ATOMIC); - if (result) - dev_err(&urb->dev->dev, - "%s - failed resubmitting read urb, error %d\n", - __func__, result); - } - - return; + /* Schedule the next read */ + usb_fill_bulk_urb(port->read_urb, port->serial->dev, + usb_rcvbulkpipe(port->serial->dev, + port->bulk_in_endpointAddress), + port->read_urb->transfer_buffer, + port->read_urb->transfer_buffer_length, + aircable_read_bulk_callback, port); + + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result && result != -EPERM) + dev_err(&urb->dev->dev, + "%s - failed resubmitting read urb, error %d\n", + __func__, result); } /* Based on ftdi_sio.c throttle */ diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 3a5d57f..baf74b4 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -1321,9 +1321,9 @@ static void cypress_read_int_callback(struct urb *urb) continue_read: tty_kref_put(tty); - /* Continue trying to always read... unless the port has closed. */ + /* Continue trying to always read */ - if (port->port.count > 0 && priv->comm_is_ok) { + if (priv->comm_is_ok) { usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev, usb_rcvintpipe(port->serial->dev, port->interrupt_in_endpointAddress), @@ -1332,7 +1332,7 @@ continue_read: cypress_read_int_callback, port, priv->read_urb_interval); result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); - if (result) { + if (result && result != -EPERM) { dev_err(&urb->dev->dev, "%s - failed resubmitting " "read urb, error %d\n", __func__, result); diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 3817228..68b0aa5 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -1262,10 +1262,10 @@ static void digi_write_bulk_callback(struct urb *urb) return; } - /* try to send any buffered data on this port, if it is open */ + /* try to send any buffered data on this port */ spin_lock(&priv->dp_port_lock); priv->dp_write_urb_in_use = 0; - if (port->port.count && priv->dp_out_buf_len > 0) { + if (priv->dp_out_buf_len > 0) { *((unsigned char *)(port->write_urb->transfer_buffer)) = (unsigned char)DIGI_CMD_SEND_DATA; *((unsigned char *)(port->write_urb->transfer_buffer) + 1) @@ -1288,7 +1288,7 @@ static void digi_write_bulk_callback(struct urb *urb) schedule_work(&priv->dp_wakeup_work); spin_unlock(&priv->dp_port_lock); - if (ret) + if (ret && ret != -EPERM) dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d, port=%d\n", __func__, ret, priv->dp_port_num); @@ -1353,8 +1353,7 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port) struct digi_port *priv = usb_get_serial_port_data(port); struct ktermios not_termios; - dbg("digi_open: TOP: port=%d, open_count=%d", - priv->dp_port_num, port->port.count); + dbg("digi_open: TOP: port=%d", priv->dp_port_num); /* be sure the device is started up */ if (digi_startup_device(port->serial) != 0) @@ -1393,8 +1392,7 @@ static void digi_close(struct usb_serial_port *port) unsigned char buf[32]; struct digi_port *priv = usb_get_serial_port_data(port); - dbg("digi_close: TOP: port=%d, open_count=%d", - priv->dp_port_num, port->port.count); + dbg("digi_close: TOP: port=%d", priv->dp_port_num); mutex_lock(&port->serial->disc_mutex); /* if disconnected, just clear flags */ @@ -1629,7 +1627,7 @@ static void digi_read_bulk_callback(struct urb *urb) /* continue read */ urb->dev = port->serial->dev; ret = usb_submit_urb(urb, GFP_ATOMIC); - if (ret != 0) { + if (ret != 0 && ret != -EPERM) { dev_err(&port->dev, "%s: failed resubmitting urb, ret=%d, port=%d\n", __func__, ret, priv->dp_port_num); @@ -1662,7 +1660,7 @@ static int digi_read_inb_callback(struct urb *urb) /* do not process callbacks on closed ports */ /* but do continue the read chain */ - if (port->port.count == 0) + if (urb->status == -ENOENT) return 0; /* short/multiple packet check */ @@ -1767,8 +1765,7 @@ static int digi_read_oob_callback(struct urb *urb) tty = tty_port_tty_get(&port->port); rts = 0; - if (port->port.count) - rts = tty->termios->c_cflag & CRTSCTS; + rts = tty->termios->c_cflag & CRTSCTS; if (opcode == DIGI_CMD_READ_INPUT_SIGNALS) { spin_lock(&priv->dp_port_lock); diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 5288203..89fac36 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -20,6 +20,7 @@ #include #include #include +#include static int debug; @@ -585,7 +586,7 @@ int usb_serial_generic_resume(struct usb_serial *serial) for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; - if (!port->port.count) + if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) continue; if (port->read_urb) { diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index c3e5d50..4a0f519 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -445,11 +445,6 @@ static void ir_read_bulk_callback(struct urb *urb) dbg("%s - port %d", __func__, port->number); - if (!port->port.count) { - dbg("%s - port closed.", __func__); - return; - } - switch (status) { case 0: /* Successful */ /* diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index f8c4b07..297163c 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -464,13 +464,9 @@ static void usa26_indat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ urb->dev = port->serial->dev; - if (port->port.count) { - err = usb_submit_urb(urb, GFP_ATOMIC); - if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", - __func__, err); - } - return; + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dbg("%s - resubmit read urb failed. (%d)", __func__, err); } /* Outdat handling is common for all devices */ @@ -483,8 +479,7 @@ static void usa2x_outdat_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); dbg("%s - urb %d", __func__, urb == p_priv->out_urbs[1]); - if (port->port.count) - usb_serial_port_softint(port); + usb_serial_port_softint(port); } static void usa26_inack_callback(struct urb *urb) @@ -615,12 +610,10 @@ static void usa28_indat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ urb->dev = port->serial->dev; - if (port->port.count) { - err = usb_submit_urb(urb, GFP_ATOMIC); - if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", - __func__, err); - } + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dbg("%s - resubmit read urb failed. (%d)", + __func__, err); p_priv->in_flip ^= 1; urb = p_priv->in_urbs[p_priv->in_flip]; @@ -856,12 +849,9 @@ static void usa49_indat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ urb->dev = port->serial->dev; - if (port->port.count) { - err = usb_submit_urb(urb, GFP_ATOMIC); - if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", - __func__, err); - } + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dbg("%s - resubmit read urb failed. (%d)", __func__, err); } static void usa49wg_indat_callback(struct urb *urb) @@ -904,11 +894,7 @@ static void usa49wg_indat_callback(struct urb *urb) /* no error on any byte */ i++; for (x = 1; x < len ; ++x) - if (port->port.count) - tty_insert_flip_char(tty, - data[i++], 0); - else - i++; + tty_insert_flip_char(tty, data[i++], 0); } else { /* * some bytes had errors, every byte has status @@ -922,14 +908,12 @@ static void usa49wg_indat_callback(struct urb *urb) if (stat & RXERROR_PARITY) flag |= TTY_PARITY; /* XXX should handle break (0x10) */ - if (port->port.count) - tty_insert_flip_char(tty, + tty_insert_flip_char(tty, data[i+1], flag); i += 2; } } - if (port->port.count) - tty_flip_buffer_push(tty); + tty_flip_buffer_push(tty); tty_kref_put(tty); } } @@ -1013,13 +997,9 @@ static void usa90_indat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ urb->dev = port->serial->dev; - if (port->port.count) { - err = usb_submit_urb(urb, GFP_ATOMIC); - if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", - __func__, err); - } - return; + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dbg("%s - resubmit read urb failed. (%d)", __func__, err); } @@ -2418,8 +2398,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, msg.portEnabled = 0; /* Sending intermediate configs */ else { - if (port->port.count) - msg.portEnabled = 1; + msg.portEnabled = 1; msg.txBreak = (p_priv->break_on); } diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 68c7457..db0541c 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -971,9 +971,9 @@ static void option_indat_callback(struct urb *urb) tty_kref_put(tty); /* Resubmit urb so we continue receiving */ - if (port->port.count && status != -ESHUTDOWN) { + if (status != -ESHUTDOWN) { err = usb_submit_urb(urb, GFP_ATOMIC); - if (err) + if (err && err != -EPERM) printk(KERN_ERR "%s: resubmit read urb failed. " "(%d)", __func__, err); else diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index 8397334..deeacde 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -585,9 +585,6 @@ static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port) usb_clear_halt(serial->dev, port->write_urb->pipe); usb_clear_halt(serial->dev, port->read_urb->pipe); - if (port->port.count != 1) - return 0; - buf = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL); if (buf == NULL) { dev_err(&port->dev, "%s(): out of memory!\n", __func__); @@ -934,10 +931,6 @@ static void oti6858_read_bulk_callback(struct urb *urb) spin_unlock_irqrestore(&priv->lock, flags); if (status != 0) { - if (!port->port.count) { - dbg("%s(): port is closed, exiting", __func__); - return; - } /* if (status == -EPROTO) { * PL2303 mysteriously fails with -EPROTO reschedule @@ -961,14 +954,12 @@ static void oti6858_read_bulk_callback(struct urb *urb) } tty_kref_put(tty); - /* schedule the interrupt urb if we are still open */ - if (port->port.count != 0) { - port->interrupt_in_urb->dev = port->serial->dev; - result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); - if (result != 0) { - dev_err(&port->dev, "%s(): usb_submit_urb() failed," - " error %d\n", __func__, result); - } + /* schedule the interrupt urb */ + port->interrupt_in_urb->dev = port->serial->dev; + result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); + if (result != 0 && result != -EPERM) { + dev_err(&port->dev, "%s(): usb_submit_urb() failed," + " error %d\n", __func__, result); } } diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index a3e5a56..571dcf1 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -1071,10 +1071,6 @@ static void pl2303_read_bulk_callback(struct urb *urb) if (status) { dbg("%s - urb status = %d", __func__, status); - if (!port->port.count) { - dbg("%s - port is closed, exiting.", __func__); - return; - } if (status == -EPROTO) { /* PL2303 mysteriously fails with -EPROTO reschedule * the read */ @@ -1107,15 +1103,11 @@ static void pl2303_read_bulk_callback(struct urb *urb) } tty_kref_put(tty); /* Schedule the next read _if_ we are still open */ - if (port->port.count) { - urb->dev = port->serial->dev; - result = usb_submit_urb(urb, GFP_ATOMIC); - if (result) - dev_err(&urb->dev->dev, "%s - failed resubmitting" - " read urb, error %d\n", __func__, result); - } - - return; + urb->dev = port->serial->dev; + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result && result != -EPERM) + dev_err(&urb->dev->dev, "%s - failed resubmitting" + " read urb, error %d\n", __func__, result); } static void pl2303_write_bulk_callback(struct urb *urb) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index c012e51..34e6f89 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -610,10 +610,10 @@ static void sierra_indat_callback(struct urb *urb) } /* Resubmit urb so we continue receiving */ - if (port->port.count && status != -ESHUTDOWN && status != -EPERM) { + if (status != -ESHUTDOWN && status != -EPERM) { usb_mark_last_busy(port->serial->dev); err = usb_submit_urb(urb, GFP_ATOMIC); - if (err) + if (err && err != -EPERM) dev_err(&port->dev, "resubmit read urb failed." "(%d)\n", err); } @@ -672,11 +672,11 @@ static void sierra_instat_callback(struct urb *urb) dev_dbg(&port->dev, "%s: error %d\n", __func__, status); /* Resubmit urb so we continue receiving IRQ data */ - if (port->port.count && status != -ESHUTDOWN && status != -ENOENT) { + if (status != -ESHUTDOWN && status != -ENOENT) { usb_mark_last_busy(serial->dev); urb->dev = serial->dev; err = usb_submit_urb(urb, GFP_ATOMIC); - if (err) + if (err && err != -EPERM) dev_err(&port->dev, "%s: resubmit intr urb " "failed. (%d)\n", __func__, err); } diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index cf508e2..5d39191 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -686,8 +686,6 @@ static void spcp8x5_read_bulk_callback(struct urb *urb) /* check the urb status */ if (result) { - if (!port->port.count) - return; if (result == -EPROTO) { /* spcp8x5 mysteriously fails with -EPROTO */ /* reschedule the read */ @@ -734,16 +732,11 @@ static void spcp8x5_read_bulk_callback(struct urb *urb) } tty_kref_put(tty); - /* Schedule the next read _if_ we are still open */ - if (port->port.count) { - urb->dev = port->serial->dev; - result = usb_submit_urb(urb , GFP_ATOMIC); - if (result) - dev_dbg(&port->dev, "failed submitting read urb %d\n", - result); - } - - return; + /* Schedule the next read */ + urb->dev = port->serial->dev; + result = usb_submit_urb(urb , GFP_ATOMIC); + if (result) + dev_dbg(&port->dev, "failed submitting read urb %d\n", result); } /* get data from ring buffer and then write to usb bus */ -- cgit v0.10.2 From 46b72d78cb022714c89a9ebc00b9581b550cfca7 Mon Sep 17 00:00:00 2001 From: Daniel Sangorrin Date: Mon, 22 Feb 2010 11:03:11 +0900 Subject: USB: serial: ftdi: add CONTEC vendor and product id This is a patch to ftdi_sio_ids.h and ftdi_sio.c that adds identifiers for CONTEC USB serial converter. I tested it with the device COM-1(USB)H Signed-off-by: Daniel Sangorrin Cc: Andreas Mohr Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 1c84355..9668647 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -615,6 +615,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) }, { USB_DEVICE(TTI_VID, TTI_QL355P_PID) }, { USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) }, + { USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) }, { USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) }, { USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) }, { USB_DEVICE(BANDB_VID, BANDB_USO9ML2_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 612a788..0727e19 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -494,6 +494,13 @@ #define RATOC_PRODUCT_ID_USB60F 0xb020 /* + * Contec products (http://www.contec.com) + * Submitted by Daniel Sangorrin + */ +#define CONTEC_VID 0x06CE /* Vendor ID */ +#define CONTEC_COM1USBH_PID 0x8311 /* COM-1(USB)H */ + +/* * Definitions for B&B Electronics products. */ #define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */ -- cgit v0.10.2 From 3756c7c091f4ca8bcaf89ee3855a326d69209716 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Sat, 20 Feb 2010 02:03:19 +0100 Subject: USB: storage: onetouch: unnecessary GFP_ATOMIC No need to use GFP_ATOMIC to allocate buffers. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c index 80e65f2..198bb3e 100644 --- a/drivers/usb/storage/onetouch.c +++ b/drivers/usb/storage/onetouch.c @@ -202,7 +202,7 @@ static int onetouch_connect_input(struct us_data *ss) goto fail1; onetouch->data = usb_buffer_alloc(udev, ONETOUCH_PKT_LEN, - GFP_ATOMIC, &onetouch->data_dma); + GFP_KERNEL, &onetouch->data_dma); if (!onetouch->data) goto fail1; -- cgit v0.10.2 From 444dc54c28740d90cb2d5f38e8163bcb46c5a885 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Sat, 20 Feb 2010 01:40:54 +0100 Subject: USB: sisusbvga: no unnecessary GFP_ATOMIC If a driver can wait on an event, it can also use GFP_KERNEL. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 3991655..aae95a0 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -250,7 +250,7 @@ sisusb_bulkout_msg(struct sisusb_usb_data *sisusb, int index, unsigned int pipe, sisusb->urbstatus[index] |= SU_URB_BUSY; /* Submit URB */ - retval = usb_submit_urb(urb, GFP_ATOMIC); + retval = usb_submit_urb(urb, GFP_KERNEL); /* If OK, and if timeout > 0, wait for completion */ if ((retval == 0) && timeout) { @@ -306,7 +306,7 @@ sisusb_bulkin_msg(struct sisusb_usb_data *sisusb, unsigned int pipe, void *data, urb->actual_length = 0; sisusb->completein = 0; - retval = usb_submit_urb(urb, GFP_ATOMIC); + retval = usb_submit_urb(urb, GFP_KERNEL); if (retval == 0) { wait_event_timeout(sisusb->wait_q, sisusb->completein, timeout); if (!sisusb->completein) { -- cgit v0.10.2 From 47cb17089c059d24e5da03f2b44ee3a089075b78 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Fri, 19 Feb 2010 23:55:57 -0700 Subject: USB: usbmon: mask seconds properly in text API The code does not implement the comment, so timestamps for long traces become confusing instead of wrapping neatly as expected. This was actually observed. Fortunately for API being in debugfs, we can just fix this instead of staying bug-for-bug compatible. Double fortunately, the stable binary API is not affected. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c index 16bfb61..31c1188 100644 --- a/drivers/usb/mon/mon_text.c +++ b/drivers/usb/mon/mon_text.c @@ -180,7 +180,7 @@ static inline unsigned int mon_get_timestamp(void) unsigned int stamp; do_gettimeofday(&tval); - stamp = tval.tv_sec & 0xFFFF; /* 2^32 = 4294967296. Limit to 4096s. */ + stamp = tval.tv_sec & 0xFFF; /* 2^32 = 4294967296. Limit to 4096s. */ stamp = stamp * 1000000 + tval.tv_usec; return stamp; } -- cgit v0.10.2 From 8740cc7d0c532e098cc428251c08befd14f087d8 Mon Sep 17 00:00:00 2001 From: Luotao Fu Date: Fri, 19 Feb 2010 15:42:00 +0100 Subject: USB: fix I2C API usage in ohci-pnx4008. i2c_board_info doesn't contain a member called name. i2c_register_client call does not exist. Signed-off-by: Luotao Fu Acked-by: Jean Delvare Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c index 2769326..cd74bbd 100644 --- a/drivers/usb/host/ohci-pnx4008.c +++ b/drivers/usb/host/ohci-pnx4008.c @@ -327,7 +327,7 @@ static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev) } i2c_adap = i2c_get_adapter(2); memset(&i2c_info, 0, sizeof(struct i2c_board_info)); - strlcpy(i2c_info.name, "isp1301_pnx", I2C_NAME_SIZE); + strlcpy(i2c_info.type, "isp1301_pnx", I2C_NAME_SIZE); isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info, normal_i2c); i2c_put_adapter(i2c_adap); @@ -411,7 +411,7 @@ out3: out2: clk_put(usb_clk); out1: - i2c_unregister_client(isp1301_i2c_client); + i2c_unregister_device(isp1301_i2c_client); isp1301_i2c_client = NULL; out_i2c_driver: i2c_del_driver(&isp1301_driver); @@ -430,7 +430,7 @@ static int usb_hcd_pnx4008_remove(struct platform_device *pdev) pnx4008_unset_usb_bits(); clk_disable(usb_clk); clk_put(usb_clk); - i2c_unregister_client(isp1301_i2c_client); + i2c_unregister_device(isp1301_i2c_client); isp1301_i2c_client = NULL; i2c_del_driver(&isp1301_driver); -- cgit v0.10.2 From ac7d4ca9e0b27d7705d273f17afd29828db35ee6 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 16 Feb 2010 18:43:29 -0800 Subject: USB: option: add Longcheer/Longsung vendor ID Longcheer is a Chinese company that manufactures the devices which a bunch of different companies like Alcatel, 4G Systems, and Mobidata rebrand. While I can't find Longcheer's USB ID registered anywhere, it's pretty clear the ID is theirs. Signed-off-by: Dan Williams Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index db0541c..847b805 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -336,8 +336,13 @@ static int option_resume(struct usb_serial *serial); #define AIRPLUS_VENDOR_ID 0x1011 #define AIRPLUS_PRODUCT_MCD650 0x3198 +/* Longcheer/Longsung vendor ID; makes whitelabel devices that + * many other vendors like 4G Systems, Alcatel, ChinaBird, + * Mobidata, etc sell under their own brand names. + */ +#define LONGCHEER_VENDOR_ID 0x1c9e + /* 4G Systems products */ -#define FOUR_G_SYSTEMS_VENDOR_ID 0x1c9e /* This is the 4G XS Stick W14 a.k.a. Mobilcom Debitel Surf-Stick * * It seems to contain a Qualcomm QSC6240/6290 chipset */ #define FOUR_G_SYSTEMS_PRODUCT_W14 0x9603 @@ -666,7 +671,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) }, { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) }, { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) }, - { USB_DEVICE(FOUR_G_SYSTEMS_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14), + { USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14), .driver_info = (kernel_ulong_t)&four_g_w14_blacklist }, { USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) }, -- cgit v0.10.2 From 67b9946dd07eeef8188e4cab816d2c370bcaa7b2 Mon Sep 17 00:00:00 2001 From: John Tsiombikas Date: Thu, 25 Feb 2010 17:09:08 +0200 Subject: USB: pl2303: initial TIOCGSERIAL support I've got a trivial patch for the pl2303 driver, that's what I needed to make the wacom serial tablet driver work properly. It uses the TIOCGSERIAL ioctl to determine if it's talking to a serial device or not, which I gather is rather common, but the pl2303 driver didn't implement that ioctl. Here's a patch, I'm not sure it's absolutely correct, I mostly looked at other similar usbserial drivers to see what I must do, but it works for me. Signed-off-by: John Tsiombikas Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 571dcf1..895d072 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -895,10 +895,23 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) static int pl2303_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { + struct serial_struct ser; struct usb_serial_port *port = tty->driver_data; dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd); switch (cmd) { + case TIOCGSERIAL: + memset(&ser, 0, sizeof ser); + ser.type = PORT_16654; + ser.line = port->serial->minor; + ser.port = port->number; + ser.baud_base = 460800; + + if (copy_to_user((void __user *)arg, &ser, sizeof ser)) + return -EFAULT; + + return 0; + case TIOCMIWAIT: dbg("%s (%d) TIOCMIWAIT", __func__, port->number); return wait_modem_info(port, arg); -- cgit v0.10.2 From 019ccc73201e933fe7d8119c90a812d347e325f9 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 25 Feb 2010 10:39:20 -0800 Subject: USB: qcaux: driver for auxiliary serial ports on Qualcomm devices qcaux: add driver for QCDM-capable ports on various devices Many Qualcomm-based devices provide a CDC-ACM port which accepts normal AT commands and PPP connections. But they only provide one which makes status or signal strength requests impossible while PPP is active. They also provide secondary USB interfaces that talk the Qualcomm Diagnostic Monitor (QCDM) protocol which can be used for status and strength. Make those QCDM ports accessible. Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index d9f289c..c78b255 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -472,6 +472,17 @@ config USB_SERIAL_OTI6858 To compile this driver as a module, choose M here: the module will be called oti6858. +config USB_SERIAL_QCAUX + tristate "USB Qualcomm Auxiliary Serial Port Driver" + ---help--- + Say Y here if you want to use the auxiliary serial ports provided + by many modems based on Qualcomm chipsets. These ports often use + a proprietary protocol called DM and cannot be used for AT- or + PPP-based communication. + + To compile this driver as a module, choose M here: the + module will be called moto_modem. If unsure, choose N. + config USB_SERIAL_QUALCOMM tristate "USB Qualcomm Serial modem" help diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index 108c7d8..83c9e43 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -45,6 +45,7 @@ obj-$(CONFIG_USB_SERIAL_OPTICON) += opticon.o obj-$(CONFIG_USB_SERIAL_OPTION) += option.o obj-$(CONFIG_USB_SERIAL_OTI6858) += oti6858.o obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o +obj-$(CONFIG_USB_SERIAL_QCAUX) += qcaux.o obj-$(CONFIG_USB_SERIAL_QUALCOMM) += qcserial.o obj-$(CONFIG_USB_SERIAL_SAFE) += safe_serial.o obj-$(CONFIG_USB_SERIAL_SIEMENS_MPI) += siemens_mpi.o diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c new file mode 100644 index 0000000..0b93620 --- /dev/null +++ b/drivers/usb/serial/qcaux.c @@ -0,0 +1,96 @@ +/* + * Qualcomm USB Auxiliary Serial Port driver + * + * Copyright (C) 2008 Greg Kroah-Hartman + * Copyright (C) 2010 Dan Williams + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Devices listed here usually provide a CDC ACM port on which normal modem + * AT commands and PPP can be used. But when that port is in-use by PPP it + * cannot be used simultaneously for status or signal strength. Instead, the + * ports here can be queried for that information using the Qualcomm DM + * protocol. + */ + +#include +#include +#include +#include +#include +#include + +/* NOTE: for now, only use this driver for devices that provide a CDC-ACM port + * for normal AT commands, but also provide secondary USB interfaces for the + * QCDM-capable ports. Devices that do not provide a CDC-ACM port should + * probably be driven by option.ko. + */ + +/* UTStarcom/Pantech/Curitel devices */ +#define UTSTARCOM_VENDOR_ID 0x106c +#define UTSTARCOM_PRODUCT_PC5740 0x3701 +#define UTSTARCOM_PRODUCT_PC5750 0x3702 /* aka Pantech PX-500 */ +#define UTSTARCOM_PRODUCT_UM150 0x3711 +#define UTSTARCOM_PRODUCT_UM175_V1 0x3712 +#define UTSTARCOM_PRODUCT_UM175_V2 0x3714 +#define UTSTARCOM_PRODUCT_UM175_ALLTEL 0x3715 + +/* CMOTECH devices */ +#define CMOTECH_VENDOR_ID 0x16d8 +#define CMOTECH_PRODUCT_CDU550 0x5553 +#define CMOTECH_PRODUCT_CDX650 0x6512 + +static struct usb_device_id id_table[] = { + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_PC5740, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_PC5750, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM150, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_V1, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_V2, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_ALLTEL, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU550, 0xff, 0xff, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDX650, 0xff, 0xff, 0x00) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +static struct usb_driver qcaux_driver = { + .name = "qcaux", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table, + .no_dynamic_id = 1, +}; + +static struct usb_serial_driver qcaux_device = { + .driver = { + .owner = THIS_MODULE, + .name = "qcaux", + }, + .id_table = id_table, + .num_ports = 1, +}; + +static int __init qcaux_init(void) +{ + int retval; + + retval = usb_serial_register(&qcaux_device); + if (retval) + return retval; + retval = usb_register(&qcaux_driver); + if (retval) + usb_serial_deregister(&qcaux_device); + return retval; +} + +static void __exit qcaux_exit(void) +{ + usb_deregister(&qcaux_driver); + usb_serial_deregister(&qcaux_device); +} + +module_init(qcaux_init); +module_exit(qcaux_exit); +MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 04b922c41710d770460c4663f69eabb0bf670be9 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Feb 2010 20:18:13 +0100 Subject: USB: ftdi_sio: remove unused tx_bytes counter Remove counter that is never exported. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 9668647..9594e35 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -88,7 +88,6 @@ struct ftdi_private { unsigned int latency; /* latency setting in use */ spinlock_t tx_lock; /* spinlock for transmit state */ - unsigned long tx_bytes; unsigned long tx_outstanding_bytes; unsigned long tx_outstanding_urbs; unsigned short max_packet_size; @@ -1729,10 +1728,6 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) dbg("%s", __func__); - spin_lock_irqsave(&priv->tx_lock, flags); - priv->tx_bytes = 0; - spin_unlock_irqrestore(&priv->tx_lock, flags); - write_latency_timer(port); /* No error checking for this (will get errors later anyway) */ @@ -1917,7 +1912,6 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port, } else { spin_lock_irqsave(&priv->tx_lock, flags); priv->tx_outstanding_bytes += count; - priv->tx_bytes += count; spin_unlock_irqrestore(&priv->tx_lock, flags); } -- cgit v0.10.2 From a880830e48e6fb7694de76ebb4a6c6bb0800f758 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Feb 2010 20:19:10 +0100 Subject: USB: ftdi_sio: remove obsolete check in unthrottle No need to check ASYNCB_INITIALIZED anymore as commit e1108a63e10d344284011cccc06328b2cd3e5da3 (usb_serial: Use the shutdown() operation) make sure that there is no longer any call to unthrottle after device specific close (in which the read urb is killed). Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 9594e35..6af0dfa 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -2492,8 +2492,7 @@ void ftdi_unthrottle(struct tty_struct *tty) port->throttled = port->throttle_req = 0; spin_unlock_irqrestore(&port->lock, flags); - /* Resubmit urb if throttled and open. */ - if (was_throttled && test_bit(ASYNCB_INITIALIZED, &port->port.flags)) + if (was_throttled) ftdi_submit_read_urb(port, GFP_KERNEL); } -- cgit v0.10.2 From 124d255382ddd37ffa920e9f5183efa54bbfe4f2 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Feb 2010 20:52:30 +0100 Subject: USB: pl2303: remove unnecessary reset of usb_device in urbs URBs are initialised at probe and do not change. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 895d072..73d5f34 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -451,7 +451,6 @@ static void pl2303_send(struct usb_serial_port *port) port->write_urb->transfer_buffer); port->write_urb->transfer_buffer_length = count; - port->write_urb->dev = port->serial->dev; result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) { dev_err(&port->dev, "%s - failed submitting write urb," @@ -769,7 +768,6 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) pl2303_set_termios(tty, port, &tmp_termios); dbg("%s - submitting read urb", __func__); - port->read_urb->dev = serial->dev; result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result) { dev_err(&port->dev, "%s - failed submitting read urb," @@ -779,7 +777,6 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) } dbg("%s - submitting interrupt urb", __func__); - port->interrupt_in_urb->dev = serial->dev; result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) { dev_err(&port->dev, "%s - failed submitting interrupt urb," @@ -1089,7 +1086,6 @@ static void pl2303_read_bulk_callback(struct urb *urb) * the read */ dbg("%s - caught -EPROTO, resubmitting the urb", __func__); - urb->dev = port->serial->dev; result = usb_submit_urb(urb, GFP_ATOMIC); if (result) dev_err(&urb->dev->dev, "%s - failed" @@ -1116,7 +1112,6 @@ static void pl2303_read_bulk_callback(struct urb *urb) } tty_kref_put(tty); /* Schedule the next read _if_ we are still open */ - urb->dev = port->serial->dev; result = usb_submit_urb(urb, GFP_ATOMIC); if (result && result != -EPERM) dev_err(&urb->dev->dev, "%s - failed resubmitting" @@ -1150,7 +1145,6 @@ static void pl2303_write_bulk_callback(struct urb *urb) dbg("%s - nonzero write bulk status received: %d", __func__, status); port->write_urb->transfer_buffer_length = 1; - port->write_urb->dev = port->serial->dev; result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) dev_err(&urb->dev->dev, "%s - failed resubmitting write" -- cgit v0.10.2 From cedf8a78421943441b9011ce7bcdab55f07d2ea6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bruno=20Pr=C3=A9mont?= Date: Fri, 26 Feb 2010 13:02:04 +0100 Subject: USB: backlight, appledisplay: fix incomplete registration failure handling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On error while registering backlight, return it to caller instead of returning 0. Mark struct backlight_ops as const. Signed-off-by: Bruno Prémont Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index 516079d..4d2952f 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -179,7 +179,7 @@ static int appledisplay_bl_get_brightness(struct backlight_device *bd) return pdata->msgdata[1]; } -static struct backlight_ops appledisplay_bl_data = { +static const struct backlight_ops appledisplay_bl_data = { .get_brightness = appledisplay_bl_get_brightness, .update_status = appledisplay_bl_update_status, }; @@ -283,6 +283,7 @@ static int appledisplay_probe(struct usb_interface *iface, &appledisplay_bl_data); if (IS_ERR(pdata->bd)) { dev_err(&iface->dev, "Backlight registration failed\n"); + retval = PTR_ERR(pdata->bd); goto error; } -- cgit v0.10.2