From 0b6dd8a640fbaf73b74949b6dc2be50263532576 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 18 Dec 2006 10:31:32 +0000 Subject: [WATCHDOG] s3c2410_wdt exit driver via labels Cleanup the s3c2410_wdt driver's exit point by using labels instead of multiple returns. Also remove the checks for the resources having been allocate in the exit, as we will now either have fully allocated or not allocated the resources at-all. Signed-off-by: Ben Dooks Signed-off-by: Wim Van Sebroeck diff --git a/drivers/char/watchdog/s3c2410_wdt.c b/drivers/char/watchdog/s3c2410_wdt.c index 18cb050..d3c0737 100644 --- a/drivers/char/watchdog/s3c2410_wdt.c +++ b/drivers/char/watchdog/s3c2410_wdt.c @@ -366,13 +366,15 @@ static int s3c2410wdt_probe(struct platform_device *pdev) wdt_mem = request_mem_region(res->start, size, pdev->name); if (wdt_mem == NULL) { printk(KERN_INFO PFX "failed to get memory region\n"); - return -ENOENT; + ret = -ENOENT; + goto err_req; } wdt_base = ioremap(res->start, size); if (wdt_base == 0) { printk(KERN_INFO PFX "failed to ioremap() region\n"); - return -EINVAL; + ret = -EINVAL; + goto err_req; } DBG("probe: mapped wdt_base=%p\n", wdt_base); @@ -380,22 +382,21 @@ static int s3c2410wdt_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (res == NULL) { printk(KERN_INFO PFX "failed to get irq resource\n"); - iounmap(wdt_base); - return -ENOENT; + ret = -ENOENT; + goto err_map; } ret = request_irq(res->start, s3c2410wdt_irq, 0, pdev->name, pdev); if (ret != 0) { printk(KERN_INFO PFX "failed to install irq (%d)\n", ret); - iounmap(wdt_base); - return ret; + goto err_map; } wdt_clock = clk_get(&pdev->dev, "watchdog"); if (wdt_clock == NULL) { printk(KERN_INFO PFX "failed to find watchdog clock source\n"); - iounmap(wdt_base); - return -ENOENT; + ret = -ENOENT; + goto err_irq; } clk_enable(wdt_clock); @@ -418,8 +419,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev) if (ret) { printk (KERN_ERR PFX "cannot register miscdev on minor=%d (%d)\n", WATCHDOG_MINOR, ret); - iounmap(wdt_base); - return ret; + goto err_clk; } if (tmr_atboot && started == 0) { @@ -434,26 +434,36 @@ static int s3c2410wdt_probe(struct platform_device *pdev) } return 0; + + err_clk: + clk_disable(wdt_clock); + clk_put(wdt_clock); + + err_irq: + free_irq(wdt_irq->start, pdev); + + err_map: + iounmap(wdt_base); + + err_req: + release_resource(wdt_mem); + kfree(wdt_mem); + + return ret; } static int s3c2410wdt_remove(struct platform_device *dev) { - if (wdt_mem != NULL) { - release_resource(wdt_mem); - kfree(wdt_mem); - wdt_mem = NULL; - } + release_resource(wdt_mem); + kfree(wdt_mem); + wdt_mem = NULL; - if (wdt_irq != NULL) { - free_irq(wdt_irq->start, dev); - wdt_irq = NULL; - } + free_irq(wdt_irq->start, dev); + wdt_irq = NULL; - if (wdt_clock != NULL) { - clk_disable(wdt_clock); - clk_put(wdt_clock); - wdt_clock = NULL; - } + clk_disable(wdt_clock); + clk_put(wdt_clock); + wdt_clock = NULL; iounmap(wdt_base); misc_deregister(&s3c2410wdt_miscdev); -- cgit v0.10.2 From 9cd446198e7646431a7f2ce7dbeec8df9f77012b Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Tue, 19 Dec 2006 17:51:44 +0900 Subject: [WATCHDOG] fix clk_get() error check The return value of clk_get() should be checked by IS_ERR(). Signed-off-by: Akinobu Mita Signed-off-by: Ben Dooks Signed-off-by: Wim Van Sebroeck diff --git a/drivers/char/watchdog/pnx4008_wdt.c b/drivers/char/watchdog/pnx4008_wdt.c index 3a55fc6..0e3d589 100644 --- a/drivers/char/watchdog/pnx4008_wdt.c +++ b/drivers/char/watchdog/pnx4008_wdt.c @@ -283,7 +283,8 @@ static int pnx4008_wdt_probe(struct platform_device *pdev) wdt_base = (void __iomem *)IO_ADDRESS(res->start); wdt_clk = clk_get(&pdev->dev, "wdt_ck"); - if (!wdt_clk) { + if (IS_ERR(wdt_clk)) { + ret = PTR_ERR(wdt_clk); release_resource(wdt_mem); kfree(wdt_mem); goto out; diff --git a/drivers/char/watchdog/s3c2410_wdt.c b/drivers/char/watchdog/s3c2410_wdt.c index d3c0737..5a5cc2a 100644 --- a/drivers/char/watchdog/s3c2410_wdt.c +++ b/drivers/char/watchdog/s3c2410_wdt.c @@ -393,9 +393,9 @@ static int s3c2410wdt_probe(struct platform_device *pdev) } wdt_clock = clk_get(&pdev->dev, "watchdog"); - if (wdt_clock == NULL) { + if (IS_ERR(wdt_clock)) { printk(KERN_INFO PFX "failed to find watchdog clock source\n"); - ret = -ENOENT; + ret = PTR_ERR(wdt_clock); goto err_irq; } -- cgit v0.10.2 From 39e3a0556a1e2d33f9491d43bae9fdaa09b0308a Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Sun, 7 Jan 2007 21:49:11 +0100 Subject: [WATCHDOG] pcwd_pci.c - get heartbeat from dip switches The PCWD cards normally use the heartbeat that is set via the dip-switches of the card. There are only 3 switches, thus 8 combinations that each have a certain heartbeat. The card can however be programmed with a heartbeat from 1 till 65535 seconds. This is what our driver does: it programs the heartbeat on the card. There are however a lot of people that don't know that we set the heartbeat of the watchdog card to the value provided by the heartbeat module parameter. Instead they think that the heartbeat value is the same as set by the dip-switches. This patch changes the driver so that at startup you can take the heartbeat from the dip-switches. You do this by setting the heartbeat module parameter to 0. This patch also makes this the default behaviour. Signed-off-by: Wim Van Sebroeck diff --git a/drivers/char/watchdog/pcwd_pci.c b/drivers/char/watchdog/pcwd_pci.c index f4872c8..059ac9f 100644 --- a/drivers/char/watchdog/pcwd_pci.c +++ b/drivers/char/watchdog/pcwd_pci.c @@ -1,7 +1,7 @@ /* * Berkshire PCI-PC Watchdog Card Driver * - * (c) Copyright 2003-2005 Wim Van Sebroeck . + * (c) Copyright 2003-2007 Wim Van Sebroeck . * * Based on source code of the following authors: * Ken Hollis , @@ -51,8 +51,8 @@ #include /* For inb/outb/... */ /* Module and version information */ -#define WATCHDOG_VERSION "1.02" -#define WATCHDOG_DATE "03 Sep 2005" +#define WATCHDOG_VERSION "1.03" +#define WATCHDOG_DATE "06 Jan 2007" #define WATCHDOG_DRIVER_NAME "PCI-PC Watchdog" #define WATCHDOG_NAME "pcwd_pci" #define PFX WATCHDOG_NAME ": " @@ -96,6 +96,18 @@ #define CMD_WRITE_WATCHDOG_TIMEOUT 0x19 #define CMD_GET_CLEAR_RESET_COUNT 0x84 +/* Watchdog's Dip Switch heartbeat values */ +static const int heartbeat_tbl [] = { + 5, /* OFF-OFF-OFF = 5 Sec */ + 10, /* OFF-OFF-ON = 10 Sec */ + 30, /* OFF-ON-OFF = 30 Sec */ + 60, /* OFF-ON-ON = 1 Min */ + 300, /* ON-OFF-OFF = 5 Min */ + 600, /* ON-OFF-ON = 10 Min */ + 1800, /* ON-ON-OFF = 30 Min */ + 3600, /* ON-ON-ON = 1 hour */ +}; + /* We can only use 1 card due to the /dev/watchdog restriction */ static int cards_found; @@ -119,10 +131,10 @@ static int debug = QUIET; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level: 0=Quiet, 1=Verbose, 2=Debug (default=0)"); -#define WATCHDOG_HEARTBEAT 2 /* 2 sec default heartbeat */ +#define WATCHDOG_HEARTBEAT 0 /* default heartbeat = delay-time from dip-switches */ static int heartbeat = WATCHDOG_HEARTBEAT; module_param(heartbeat, int, 0); -MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (0 Date: Sun, 7 Jan 2007 21:57:03 +0100 Subject: [WATCHDOG] pcwd_pci.c - spinlock fixes the keepalive and get_temperature functions should use spinlocks also. Signed-off-by: Wim Van Sebroeck diff --git a/drivers/char/watchdog/pcwd_pci.c b/drivers/char/watchdog/pcwd_pci.c index 059ac9f..95ddcd8 100644 --- a/drivers/char/watchdog/pcwd_pci.c +++ b/drivers/char/watchdog/pcwd_pci.c @@ -298,7 +298,9 @@ static int pcipcwd_stop(void) static int pcipcwd_keepalive(void) { /* Re-trigger watchdog by writing to port 0 */ + spin_lock(&pcipcwd_private.io_lock); outb_p(0x42, pcipcwd_private.io_addr); /* send out any data */ + spin_unlock(&pcipcwd_private.io_lock); if (debug >= DEBUG) printk(KERN_DEBUG PFX "Watchdog keepalive signal send\n"); @@ -385,7 +387,9 @@ static int pcipcwd_get_temperature(int *temperature) if (!pcipcwd_private.supports_temp) return -ENODEV; + spin_lock(&pcipcwd_private.io_lock); *temperature = inb_p(pcipcwd_private.io_addr); + spin_unlock(&pcipcwd_private.io_lock); /* * Convert celsius to fahrenheit, since this was @@ -814,6 +818,8 @@ static int __init pcipcwd_init_module(void) static void __exit pcipcwd_cleanup_module(void) { pci_unregister_driver(&pcipcwd_driver); + + printk(KERN_INFO PFX "Watchdog Module Unloaded.\n"); } module_init(pcipcwd_init_module); -- cgit v0.10.2 From d26d90967de9d51c08d5821e362cb2245f83c1a8 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Mon, 8 Jan 2007 22:40:33 +0100 Subject: [WATCHDOG] pcwd_usb.c - document includes document and review the include files. Signed-off-by: Wim Van Sebroeck diff --git a/drivers/char/watchdog/pcwd_usb.c b/drivers/char/watchdog/pcwd_usb.c index 2da5ac9..e5c2206 100644 --- a/drivers/char/watchdog/pcwd_usb.c +++ b/drivers/char/watchdog/pcwd_usb.c @@ -24,26 +24,25 @@ * http://www.berkprod.com/ or http://www.pcwatchdog.com/ */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include +#include /* For module specific items */ +#include /* For new moduleparam's */ +#include /* For standard types (like size_t) */ +#include /* For the -ENODEV/... values */ +#include /* For printk/panic/... */ +#include /* For mdelay function */ +#include /* For MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) */ +#include /* For the watchdog specific items */ +#include /* For notifier support */ +#include /* For reboot_notifier stuff */ +#include /* For __init/__exit/... */ +#include /* For file operations */ +#include /* For USB functions */ +#include /* For kmalloc, ... */ +#include /* For mutex locking */ #include /* For HID_REQ_SET_REPORT & HID_DT_REPORT */ +#include /* For copy_to_user/put_user/... */ + #ifdef CONFIG_USB_DEBUG static int debug = 1; -- cgit v0.10.2 From 2ef473de1ee62eb31b6b98885562cdb4389b01dc Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Mon, 8 Jan 2007 22:45:30 +0100 Subject: [WATCHDOG] pcwd_usb.c - get heartbeat from dip switches The PCWD cards normally use the heartbeat that is set via the dip-switches of the card. There are only 3 switches, thus 8 combinations that each have a certain heartbeat. The card can however be programmed with a heartbeat from 1 till 65535 seconds. This is what our driver does: it programs the heartbeat on the card. There are however a lot of people that don't know that we set the heartbeat of the watchdog card to the value provided by the heartbeat module parameter. Instead they think that the heartbeat value is the same as set by the dip-switches. This patch changes the driver so that at startup you can take the heartbeat from the dip-switches. You do this by setting the heartbeat module parameter to 0. This patch also makes this the default behaviour. Signed-off-by: Wim Van Sebroeck diff --git a/drivers/char/watchdog/pcwd_usb.c b/drivers/char/watchdog/pcwd_usb.c index e5c2206..1ad1f22 100644 --- a/drivers/char/watchdog/pcwd_usb.c +++ b/drivers/char/watchdog/pcwd_usb.c @@ -1,7 +1,7 @@ /* * Berkshire USB-PC Watchdog Card Driver * - * (c) Copyright 2004 Wim Van Sebroeck . + * (c) Copyright 2004-2007 Wim Van Sebroeck . * * Based on source code of the following authors: * Ken Hollis , @@ -56,8 +56,8 @@ /* Module and Version Information */ -#define DRIVER_VERSION "1.01" -#define DRIVER_DATE "15 Mar 2005" +#define DRIVER_VERSION "1.02" +#define DRIVER_DATE "06 Jan 2007" #define DRIVER_AUTHOR "Wim Van Sebroeck " #define DRIVER_DESC "Berkshire USB-PC Watchdog driver" #define DRIVER_LICENSE "GPL" @@ -74,10 +74,10 @@ MODULE_ALIAS_MISCDEV(TEMP_MINOR); module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug enabled or not"); -#define WATCHDOG_HEARTBEAT 2 /* 2 sec default heartbeat */ +#define WATCHDOG_HEARTBEAT 0 /* default heartbeat = delay-time from dip-switches */ static int heartbeat = WATCHDOG_HEARTBEAT; module_param(heartbeat, int, 0); -MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (0 Date: Tue, 9 Jan 2007 22:38:54 +0100 Subject: [WATCHDOG] pcwd.c - e-mail adres update update Simon Machell's e-mail adres Signed-off-by: Wim Van Sebroeck diff --git a/drivers/char/watchdog/pcwd.c b/drivers/char/watchdog/pcwd.c index 8e1e6e4..8251d83 100644 --- a/drivers/char/watchdog/pcwd.c +++ b/drivers/char/watchdog/pcwd.c @@ -2,7 +2,7 @@ * PC Watchdog Driver * by Ken Hollis (khollis@bitgate.com) * - * Permission granted from Simon Machell (73244.1270@compuserve.com) + * Permission granted from Simon Machell (smachell@berkprod.com) * Written for the Linux Kernel, and GPLed by Ken Hollis * * 960107 Added request_region routines, modulized the whole thing. -- cgit v0.10.2 From f3dc07330c3e43a8d365eaa74693e320e6ed79d9 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Tue, 9 Jan 2007 22:43:49 +0100 Subject: [WATCHDOG] pcwd_usb.c - get heartbeat from dip switches The PCWD cards normally use the heartbeat that is set via the dip-switches of the card. There are only 3 switches, thus 8 combinations that each have a certain heartbeat. The card can however be programmed with a heartbeat from 1 till 65535 seconds. This is what our driver does: it programs the heartbeat on the card. There are however a lot of people that don't know that we set the heartbeat of the watchdog card to the value provided by the heartbeat module parameter. Instead they think that the heartbeat value is the same as set by the dip-switches. This patch changes the driver so that at startup you can take the heartbeat from the dip-switches. You do this by setting the heartbeat module parameter to 0. This patch also makes this the default behaviour. Signed-off-by: Wim Van Sebroeck diff --git a/drivers/char/watchdog/pcwd.c b/drivers/char/watchdog/pcwd.c index 8251d83..aab6621 100644 --- a/drivers/char/watchdog/pcwd.c +++ b/drivers/char/watchdog/pcwd.c @@ -70,8 +70,8 @@ #include /* For inb/outb/... */ /* Module and version information */ -#define WATCHDOG_VERSION "1.17" -#define WATCHDOG_DATE "12 Feb 2006" +#define WATCHDOG_VERSION "1.18" +#define WATCHDOG_DATE "06 Jan 2007" #define WATCHDOG_DRIVER_NAME "ISA-PC Watchdog" #define WATCHDOG_NAME "pcwd" #define PFX WATCHDOG_NAME ": " @@ -132,6 +132,18 @@ #define CMD_ISA_DELAY_TIME_8SECS 0x0C #define CMD_ISA_RESET_RELAYS 0x0D +/* Watchdog's Dip Switch heartbeat values */ +static const int heartbeat_tbl [] = { + 20, /* OFF-OFF-OFF = 20 Sec */ + 40, /* OFF-OFF-ON = 40 Sec */ + 60, /* OFF-ON-OFF = 1 Min */ + 300, /* OFF-ON-ON = 5 Min */ + 600, /* ON-OFF-OFF = 10 Min */ + 1800, /* ON-OFF-ON = 30 Min */ + 3600, /* ON-ON-OFF = 1 Hour */ + 7200, /* ON-ON-ON = 2 hour */ +}; + /* * We are using an kernel timer to do the pinging of the watchdog * every ~500ms. We try to set the internal heartbeat of the @@ -167,10 +179,10 @@ static int debug = QUIET; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level: 0=Quiet, 1=Verbose, 2=Debug (default=0)"); -#define WATCHDOG_HEARTBEAT 60 /* 60 sec default heartbeat */ +#define WATCHDOG_HEARTBEAT 0 /* default heartbeat = delay-time from dip-switches */ static int heartbeat = WATCHDOG_HEARTBEAT; module_param(heartbeat, int, 0); -MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2<=heartbeat<=7200, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); +MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2<=heartbeat<=7200 or 0=delay-time from dip-switches, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); @@ -844,6 +856,10 @@ static int __devinit pcwatchdog_init(int base_addr) /* Show info about the card itself */ pcwd_show_card_info(); + /* If heartbeat = 0 then we use the heartbeat from the dip-switches */ + if (heartbeat == 0) + heartbeat = heartbeat_tbl[(pcwd_get_option_switches() & 0x07)]; + /* Check that the heartbeat value is within it's range ; if not reset to the default */ if (pcwd_set_heartbeat(heartbeat)) { pcwd_set_heartbeat(WATCHDOG_HEARTBEAT); -- cgit v0.10.2 From 76c11f0442257099cbb474301f2ffff38649d3d3 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Wed, 10 Jan 2007 23:23:44 +0100 Subject: [WATCHDOG] acquirewdt.c - clean before platform_device patches Clean the current code before we convert the driver to a platform_device. This clean consists of: - document the includes - make sure that the printk's use the module/driver-name - do the exit of the module exactly the opposite of the init of the module Signed-off-by: Wim Van Sebroeck diff --git a/drivers/char/watchdog/acquirewdt.c b/drivers/char/watchdog/acquirewdt.c index 154d67e..a968f84 100644 --- a/drivers/char/watchdog/acquirewdt.c +++ b/drivers/char/watchdog/acquirewdt.c @@ -48,46 +48,52 @@ * It can be 1, 2, 10, 20, 110 or 220 seconds. */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include +/* + * Includes, defines, variables, module parameters, ... + */ +/* Includes */ +#include /* For module specific items */ +#include /* For new moduleparam's */ +#include /* For standard types (like size_t) */ +#include /* For the -ENODEV/... values */ +#include /* For printk/panic/... */ +#include /* For MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) */ +#include /* For the watchdog specific items */ +#include /* For file operations */ +#include /* For io-port access */ +#include /* For reboot notifier */ +#include /* For reboot notifier */ +#include /* For __init/__exit/... */ + +#include /* For copy_to_user/put_user/... */ +#include /* For inb/outb/... */ + +/* Module information */ +#define DRV_NAME "acquirewdt" +#define PFX DRV_NAME ": " #define WATCHDOG_NAME "Acquire WDT" -#define PFX WATCHDOG_NAME ": " #define WATCHDOG_HEARTBEAT 0 /* There is no way to see what the correct time-out period is */ +/* internal variables */ static unsigned long acq_is_open; static char expect_close; -/* - * You must set these - there is no sane way to probe for this board. - */ - -static int wdt_stop = 0x43; +/* module parameters */ +static int wdt_stop = 0x43; /* You must set this - there is no sane way to probe for this board. */ module_param(wdt_stop, int, 0); MODULE_PARM_DESC(wdt_stop, "Acquire WDT 'stop' io port (default 0x43)"); -static int wdt_start = 0x443; +static int wdt_start = 0x443; /* You must set this - there is no sane way to probe for this board. */ module_param(wdt_start, int, 0); MODULE_PARM_DESC(wdt_start, "Acquire WDT 'start' io port (default 0x443)"); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* - * Kernel methods. + * Watchdog Operations */ static void acq_keepalive(void) @@ -103,7 +109,7 @@ static void acq_stop(void) } /* - * /dev/watchdog handling. + * /dev/watchdog handling */ static ssize_t acq_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) @@ -143,7 +149,7 @@ static int acq_ioctl(struct inode *inode, struct file *file, unsigned int cmd, { .options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, .firmware_version = 1, - .identity = "Acquire WDT", + .identity = WATCHDOG_NAME, }; switch(cmd) @@ -240,11 +246,10 @@ static const struct file_operations acq_fops = { .release = acq_close, }; -static struct miscdevice acq_miscdev= -{ - .minor = WATCHDOG_MINOR, - .name = "watchdog", - .fops = &acq_fops, +static struct miscdevice acq_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &acq_fops, }; /* @@ -252,11 +257,14 @@ static struct miscdevice acq_miscdev= * turn the timebomb registers off. */ -static struct notifier_block acq_notifier = -{ +static struct notifier_block acq_notifier = { .notifier_call = acq_notify_sys, }; +/* + * Init & exit routines + */ + static int __init acq_init(void) { int ret; @@ -313,9 +321,9 @@ static void __exit acq_exit(void) { misc_deregister(&acq_miscdev); unregister_reboot_notifier(&acq_notifier); + release_region(wdt_start,1); if(wdt_stop != wdt_start) release_region(wdt_stop,1); - release_region(wdt_start,1); } module_init(acq_init); -- cgit v0.10.2 From ad5fe323182fd3adab4225c93eae36f3c555a884 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Wed, 10 Jan 2007 23:36:13 +0100 Subject: [WATCHDOG] acquirewdt.c - convert to platform_device Convert the acquirewdt watchdog into a platform_device Signed-off-by: Wim Van Sebroeck diff --git a/drivers/char/watchdog/acquirewdt.c b/drivers/char/watchdog/acquirewdt.c index a968f84..687b809 100644 --- a/drivers/char/watchdog/acquirewdt.c +++ b/drivers/char/watchdog/acquirewdt.c @@ -64,6 +64,7 @@ #include /* For io-port access */ #include /* For reboot notifier */ #include /* For reboot notifier */ +#include /* For platform_driver framework */ #include /* For __init/__exit/... */ #include /* For copy_to_user/put_user/... */ @@ -76,6 +77,7 @@ #define WATCHDOG_HEARTBEAT 0 /* There is no way to see what the correct time-out period is */ /* internal variables */ +static struct platform_device *acq_platform_device; /* the watchdog platform device */ static unsigned long acq_is_open; static char expect_close; @@ -265,12 +267,10 @@ static struct notifier_block acq_notifier = { * Init & exit routines */ -static int __init acq_init(void) +static int __devinit acq_probe(struct platform_device *dev) { int ret; - printk(KERN_INFO "WDT driver for Acquire single board computer initialising.\n"); - if (wdt_stop != wdt_start) { if (!request_region(wdt_stop, 1, WATCHDOG_NAME)) { printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", @@ -317,13 +317,54 @@ out: return ret; } -static void __exit acq_exit(void) +static int __devexit acq_remove(struct platform_device *dev) { misc_deregister(&acq_miscdev); unregister_reboot_notifier(&acq_notifier); release_region(wdt_start,1); if(wdt_stop != wdt_start) release_region(wdt_stop,1); + + return 0; +} + +static struct platform_driver acquirewdt_driver = { + .probe = acq_probe, + .remove = __devexit_p(acq_remove), + .driver = { + .owner = THIS_MODULE, + .name = DRV_NAME, + }, +}; + +static int __init acq_init(void) +{ + int err; + + printk(KERN_INFO "WDT driver for Acquire single board computer initialising.\n"); + + err = platform_driver_register(&acquirewdt_driver); + if (err) + return err; + + acq_platform_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0); + if (IS_ERR(acq_platform_device)) { + err = PTR_ERR(acq_platform_device); + goto unreg_platform_driver; + } + + return 0; + +unreg_platform_driver: + platform_driver_unregister(&acquirewdt_driver); + return err; +} + +static void __exit acq_exit(void) +{ + platform_device_unregister(acq_platform_device); + platform_driver_unregister(&acquirewdt_driver); + printk(KERN_INFO PFX "Watchdog Module Unloaded.\n"); } module_init(acq_init); -- cgit v0.10.2 From 98c08e98f8e5af1caf106e9ee3d46f3eb1ba4858 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Wed, 10 Jan 2007 23:38:56 +0100 Subject: [WATCHDOG] acquirewdt.c - convert to platform_device part 2 Convert the reboot_notifier into the platform_device's shutdown method Signed-off-by: Wim Van Sebroeck diff --git a/drivers/char/watchdog/acquirewdt.c b/drivers/char/watchdog/acquirewdt.c index 687b809..85269c3 100644 --- a/drivers/char/watchdog/acquirewdt.c +++ b/drivers/char/watchdog/acquirewdt.c @@ -62,8 +62,6 @@ #include /* For the watchdog specific items */ #include /* For file operations */ #include /* For io-port access */ -#include /* For reboot notifier */ -#include /* For reboot notifier */ #include /* For platform_driver framework */ #include /* For __init/__exit/... */ @@ -222,20 +220,6 @@ static int acq_close(struct inode *inode, struct file *file) } /* - * Notifier for system down - */ - -static int acq_notify_sys(struct notifier_block *this, unsigned long code, - void *unused) -{ - if(code==SYS_DOWN || code==SYS_HALT) { - /* Turn the WDT off */ - acq_stop(); - } - return NOTIFY_DONE; -} - -/* * Kernel Interfaces */ @@ -255,15 +239,6 @@ static struct miscdevice acq_miscdev = { }; /* - * The WDT card needs to learn about soft shutdowns in order to - * turn the timebomb registers off. - */ - -static struct notifier_block acq_notifier = { - .notifier_call = acq_notify_sys, -}; - -/* * Init & exit routines */ @@ -287,18 +262,11 @@ static int __devinit acq_probe(struct platform_device *dev) goto unreg_stop; } - ret = register_reboot_notifier(&acq_notifier); - if (ret != 0) { - printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", - ret); - goto unreg_regions; - } - ret = misc_register(&acq_miscdev); if (ret != 0) { printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", WATCHDOG_MINOR, ret); - goto unreg_reboot; + goto unreg_regions; } printk (KERN_INFO PFX "initialized. (nowayout=%d)\n", @@ -306,8 +274,6 @@ static int __devinit acq_probe(struct platform_device *dev) return 0; -unreg_reboot: - unregister_reboot_notifier(&acq_notifier); unreg_regions: release_region(wdt_start, 1); unreg_stop: @@ -320,7 +286,6 @@ out: static int __devexit acq_remove(struct platform_device *dev) { misc_deregister(&acq_miscdev); - unregister_reboot_notifier(&acq_notifier); release_region(wdt_start,1); if(wdt_stop != wdt_start) release_region(wdt_stop,1); @@ -328,9 +293,16 @@ static int __devexit acq_remove(struct platform_device *dev) return 0; } +static void acq_shutdown(struct platform_device *dev) +{ + /* Turn the WDT off if we have a soft shutdown */ + acq_stop(); +} + static struct platform_driver acquirewdt_driver = { .probe = acq_probe, .remove = __devexit_p(acq_remove), + .shutdown = acq_shutdown, .driver = { .owner = THIS_MODULE, .name = DRV_NAME, -- cgit v0.10.2 From 1d747be647c2239e39a9b5faa138c1e36222b37e Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Thu, 11 Jan 2007 22:19:28 +0100 Subject: [WATCHDOG] advantechwdt.c - cleanup before platform_device patches This cleanup consists of: - make sure that the printk's use the module/driver-name - do the exit of the module exactly the opposite of the init of the module Signed-off-by: Wim Van Sebroeck diff --git a/drivers/char/watchdog/advantechwdt.c b/drivers/char/watchdog/advantechwdt.c index 9d73276..6c91979 100644 --- a/drivers/char/watchdog/advantechwdt.c +++ b/drivers/char/watchdog/advantechwdt.c @@ -43,8 +43,9 @@ #include #include +#define DRV_NAME "advantechwdt" +#define PFX DRV_NAME ": " #define WATCHDOG_NAME "Advantech WDT" -#define PFX WATCHDOG_NAME ": " #define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */ static unsigned long advwdt_is_open; @@ -75,10 +76,10 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=63, defaul static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* - * Kernel methods. + * Watchdog Operations */ static void @@ -94,6 +95,10 @@ advwdt_disable(void) inb_p(wdt_stop); } +/* + * /dev/watchdog handling + */ + static ssize_t advwdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { @@ -126,7 +131,7 @@ advwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, static struct watchdog_info ident = { .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, .firmware_version = 1, - .identity = "Advantech WDT", + .identity = WATCHDOG_NAME, }; switch (cmd) { @@ -237,9 +242,9 @@ static const struct file_operations advwdt_fops = { }; static struct miscdevice advwdt_miscdev = { - .minor = WATCHDOG_MINOR, - .name = "watchdog", - .fops = &advwdt_fops, + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &advwdt_fops, }; /* @@ -251,6 +256,10 @@ static struct notifier_block advwdt_notifier = { .notifier_call = advwdt_notify_sys, }; +/* + * Init & exit routines + */ + static int __init advwdt_init(void) { @@ -314,9 +323,9 @@ advwdt_exit(void) { misc_deregister(&advwdt_miscdev); unregister_reboot_notifier(&advwdt_notifier); + release_region(wdt_start,1); if(wdt_stop != wdt_start) release_region(wdt_stop,1); - release_region(wdt_start,1); } module_init(advwdt_init); -- cgit v0.10.2 From 0349a363e23a0533e081ca320c837bc08247343e Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Thu, 11 Jan 2007 22:27:51 +0100 Subject: [WATCHDOG] advantechwdt.c - move set_heartbeat to a seperate function Put the set_heartbeat/timeout code into a seperate function Signed-off-by: Wim Van Sebroeck diff --git a/drivers/char/watchdog/advantechwdt.c b/drivers/char/watchdog/advantechwdt.c index 6c91979..216af0d 100644 --- a/drivers/char/watchdog/advantechwdt.c +++ b/drivers/char/watchdog/advantechwdt.c @@ -95,6 +95,16 @@ advwdt_disable(void) inb_p(wdt_stop); } +static int +advwdt_set_heartbeat(int t) +{ + if ((t < 1) || (t > 63)) + return -EINVAL; + + timeout = t; + return 0; +} + /* * /dev/watchdog handling */ @@ -151,9 +161,8 @@ advwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, case WDIOC_SETTIMEOUT: if (get_user(new_timeout, p)) return -EFAULT; - if ((new_timeout < 1) || (new_timeout > 63)) + if (advwdt_set_heartbeat(new_timeout)) return -EINVAL; - timeout = new_timeout; advwdt_ping(); /* Fall */ @@ -267,12 +276,6 @@ advwdt_init(void) printk(KERN_INFO "WDT driver for Advantech single board computer initialising.\n"); - if (timeout < 1 || timeout > 63) { - timeout = WATCHDOG_TIMEOUT; - printk (KERN_INFO PFX "timeout value must be 1<=x<=63, using %d\n", - timeout); - } - if (wdt_stop != wdt_start) { if (!request_region(wdt_stop, 1, WATCHDOG_NAME)) { printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", @@ -289,6 +292,13 @@ advwdt_init(void) goto unreg_stop; } + /* Check that the heartbeat value is within it's range ; if not reset to the default */ + if (advwdt_set_heartbeat(timeout)) { + advwdt_set_heartbeat(WATCHDOG_TIMEOUT); + printk (KERN_INFO PFX "timeout value must be 1<=x<=63, using %d\n", + timeout); + } + ret = register_reboot_notifier(&advwdt_notifier); if (ret != 0) { printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", -- cgit v0.10.2 From c2bd11c7cbba45c3a1d850a8a29855cb4d61654c Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Thu, 11 Jan 2007 22:35:40 +0100 Subject: [WATCHDOG] advantechwdt.c - convert to platform_device Convert the advantechwdt watchdog into a platform_device Signed-off-by: Wim Van Sebroeck diff --git a/drivers/char/watchdog/advantechwdt.c b/drivers/char/watchdog/advantechwdt.c index 216af0d..528a417 100644 --- a/drivers/char/watchdog/advantechwdt.c +++ b/drivers/char/watchdog/advantechwdt.c @@ -37,6 +37,7 @@ #include #include #include +#include #include #include @@ -48,6 +49,7 @@ #define WATCHDOG_NAME "Advantech WDT" #define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */ +static struct platform_device *advwdt_platform_device; /* the watchdog platform device */ static unsigned long advwdt_is_open; static char adv_expect_close; @@ -269,13 +271,11 @@ static struct notifier_block advwdt_notifier = { * Init & exit routines */ -static int __init -advwdt_init(void) +static int __devinit +advwdt_probe(struct platform_device *dev) { int ret; - printk(KERN_INFO "WDT driver for Advantech single board computer initialising.\n"); - if (wdt_stop != wdt_start) { if (!request_region(wdt_stop, 1, WATCHDOG_NAME)) { printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", @@ -328,14 +328,57 @@ unreg_stop: goto out; } -static void __exit -advwdt_exit(void) +static int __devexit +advwdt_remove(struct platform_device *dev) { misc_deregister(&advwdt_miscdev); unregister_reboot_notifier(&advwdt_notifier); release_region(wdt_start,1); if(wdt_stop != wdt_start) release_region(wdt_stop,1); + + return 0; +} + +static struct platform_driver advwdt_driver = { + .probe = advwdt_probe, + .remove = __devexit_p(advwdt_remove), + .driver = { + .owner = THIS_MODULE, + .name = DRV_NAME, + }, +}; + +static int __init +advwdt_init(void) +{ + int err; + + printk(KERN_INFO "WDT driver for Advantech single board computer initialising.\n"); + + err = platform_driver_register(&advwdt_driver); + if (err) + return err; + + advwdt_platform_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0); + if (IS_ERR(advwdt_platform_device)) { + err = PTR_ERR(advwdt_platform_device); + goto unreg_platform_driver; + } + + return 0; + +unreg_platform_driver: + platform_driver_unregister(&advwdt_driver); + return err; +} + +static void __exit +advwdt_exit(void) +{ + platform_device_unregister(advwdt_platform_device); + platform_driver_unregister(&advwdt_driver); + printk(KERN_INFO PFX "Watchdog Module Unloaded.\n"); } module_init(advwdt_init); -- cgit v0.10.2 From 2e9c9cf44b17ef5fa1f360bc175ed7761daf3428 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Thu, 11 Jan 2007 22:42:41 +0100 Subject: [WATCHDOG] advantechwdt.c - convert to platform_device part 2 Convert the reboot_notifier into the platform_device's shutdown method Signed-off-by: Wim Van Sebroeck diff --git a/drivers/char/watchdog/advantechwdt.c b/drivers/char/watchdog/advantechwdt.c index 528a417..8121cc2 100644 --- a/drivers/char/watchdog/advantechwdt.c +++ b/drivers/char/watchdog/advantechwdt.c @@ -35,8 +35,6 @@ #include #include #include -#include -#include #include #include @@ -225,21 +223,6 @@ advwdt_close(struct inode *inode, struct file *file) } /* - * Notifier for system down - */ - -static int -advwdt_notify_sys(struct notifier_block *this, unsigned long code, - void *unused) -{ - if (code == SYS_DOWN || code == SYS_HALT) { - /* Turn the WDT off */ - advwdt_disable(); - } - return NOTIFY_DONE; -} - -/* * Kernel Interfaces */ @@ -259,15 +242,6 @@ static struct miscdevice advwdt_miscdev = { }; /* - * The WDT needs to learn about soft shutdowns in order to - * turn the timebomb registers off. - */ - -static struct notifier_block advwdt_notifier = { - .notifier_call = advwdt_notify_sys, -}; - -/* * Init & exit routines */ @@ -299,18 +273,11 @@ advwdt_probe(struct platform_device *dev) timeout); } - ret = register_reboot_notifier(&advwdt_notifier); - if (ret != 0) { - printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", - ret); - goto unreg_regions; - } - ret = misc_register(&advwdt_miscdev); if (ret != 0) { printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", WATCHDOG_MINOR, ret); - goto unreg_reboot; + goto unreg_regions; } printk (KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n", @@ -318,8 +285,6 @@ advwdt_probe(struct platform_device *dev) out: return ret; -unreg_reboot: - unregister_reboot_notifier(&advwdt_notifier); unreg_regions: release_region(wdt_start, 1); unreg_stop: @@ -332,7 +297,6 @@ static int __devexit advwdt_remove(struct platform_device *dev) { misc_deregister(&advwdt_miscdev); - unregister_reboot_notifier(&advwdt_notifier); release_region(wdt_start,1); if(wdt_stop != wdt_start) release_region(wdt_stop,1); @@ -340,9 +304,17 @@ advwdt_remove(struct platform_device *dev) return 0; } +static void +advwdt_shutdown(struct platform_device *dev) +{ + /* Turn the WDT off if we have a soft shutdown */ + advwdt_disable(); +} + static struct platform_driver advwdt_driver = { .probe = advwdt_probe, .remove = __devexit_p(advwdt_remove), + .shutdown = advwdt_shutdown, .driver = { .owner = THIS_MODULE, .name = DRV_NAME, -- cgit v0.10.2 From bffda5c87cf60d27a27f2e862c82c474f8e89767 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Sat, 27 Jan 2007 20:54:24 +0100 Subject: [WATCHDOG] show default value for nowayout in module parameter change default=CONFIG_WATCHDOG_NOWAYOUT in the module parameter for nowayout by it's real value (0 or 1) by using: __MODULE_STRING(WATCHDOG_NOWAYOUT) Signed-off-by: Wim Van Sebroeck diff --git a/drivers/char/watchdog/alim1535_wdt.c b/drivers/char/watchdog/alim1535_wdt.c index 01b0d13..e3f6a7d 100644 --- a/drivers/char/watchdog/alim1535_wdt.c +++ b/drivers/char/watchdog/alim1535_wdt.c @@ -40,7 +40,7 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (0. + * (c) Copyright 2006-2007 Wim Van Sebroeck . * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -49,7 +49,7 @@ /* Module and version information */ #define DRV_NAME "iTCO_wdt" #define DRV_VERSION "1.01" -#define DRV_RELDATE "11-Nov-2006" +#define DRV_RELDATE "21-Jan-2007" #define PFX DRV_NAME ": " /* Includes */ @@ -187,7 +187,7 @@ MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2" #define DRIVER_DESC "Berkshire USB-PC Watchdog driver" #define DRIVER_LICENSE "GPL" @@ -81,7 +81,7 @@ MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (0 Date: Sat, 27 Jan 2007 21:50:53 +0100 Subject: [WATCHDOG] ib700_wdt.c stop + set_heartbeat operations move the code to stop the watchdog and the code to set the heartbeat of the watchdog to seperate functions. Signed-off-by: Wim Van Sebroeck diff --git a/drivers/char/watchdog/ib700wdt.c b/drivers/char/watchdog/ib700wdt.c index 0c3c3a3..5510db2 100644 --- a/drivers/char/watchdog/ib700wdt.c +++ b/drivers/char/watchdog/ib700wdt.c @@ -122,7 +122,7 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" _ /* - * Kernel methods. + * Watchdog Operations */ static void @@ -132,6 +132,31 @@ ibwdt_ping(void) outb_p(wd_margin, WDT_START); } +static void +ibwdt_disable(void) +{ + outb_p(0, WDT_STOP); +} + +static int +ibwdt_set_heartbeat(int t) +{ + int i; + + if ((t < 0) || (t > 30)) + return -EINVAL; + + for (i = 0x0F; i > -1; i--) + if (wd_times[i] > t) + break; + wd_margin = i; + return 0; +} + +/* + * /dev/watchdog handling + */ + static ssize_t ibwdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { @@ -159,7 +184,7 @@ static int ibwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { - int i, new_margin; + int new_margin; void __user *argp = (void __user *)arg; int __user *p = argp; @@ -185,12 +210,8 @@ ibwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, case WDIOC_SETTIMEOUT: if (get_user(new_margin, p)) return -EFAULT; - if ((new_margin < 0) || (new_margin > 30)) + if (ibwdt_set_heartbeat(new_margin)) return -EINVAL; - for (i = 0x0F; i > -1; i--) - if (wd_times[i] > new_margin) - break; - wd_margin = i; ibwdt_ping(); /* Fall */ @@ -226,7 +247,7 @@ ibwdt_close(struct inode *inode, struct file *file) { spin_lock(&ibwdt_lock); if (expect_close == 42) - outb_p(0, WDT_STOP); + ibwdt_disable(); else printk(KERN_CRIT PFX "WDT device closed unexpectedly. WDT will not stop!\n"); @@ -246,7 +267,7 @@ ibwdt_notify_sys(struct notifier_block *this, unsigned long code, { if (code == SYS_DOWN || code == SYS_HALT) { /* Turn the WDT off */ - outb_p(0, WDT_STOP); + ibwdt_disable(); } return NOTIFY_DONE; } -- cgit v0.10.2 From f6e4803969ee93bef6aeeb6aff0f9214547d1bb1 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Sat, 27 Jan 2007 21:58:08 +0100 Subject: [WATCHDOG] ib700wdt.c clean-up init and exit routines clean-up the init and exit routines so that they use the same sequence. Signed-off-by: Wim Van Sebroeck diff --git a/drivers/char/watchdog/ib700wdt.c b/drivers/char/watchdog/ib700wdt.c index 5510db2..d379bf0 100644 --- a/drivers/char/watchdog/ib700wdt.c +++ b/drivers/char/watchdog/ib700wdt.c @@ -300,6 +300,10 @@ static struct notifier_block ibwdt_notifier = { .notifier_call = ibwdt_notify_sys, }; +/* + * Init & exit routines + */ + static int __init ibwdt_init(void) { int res; @@ -307,11 +311,6 @@ static int __init ibwdt_init(void) printk(KERN_INFO PFX "WDT driver for IB700 single board computer initialising.\n"); spin_lock_init(&ibwdt_lock); - res = misc_register(&ibwdt_miscdev); - if (res) { - printk (KERN_ERR PFX "failed to register misc device\n"); - goto out_nomisc; - } #if WDT_START != WDT_STOP if (!request_region(WDT_STOP, 1, "IB700 WDT")) { @@ -326,13 +325,22 @@ static int __init ibwdt_init(void) res = -EIO; goto out_nostartreg; } + res = register_reboot_notifier(&ibwdt_notifier); if (res) { printk (KERN_ERR PFX "Failed to register reboot notifier.\n"); goto out_noreboot; } + + res = misc_register(&ibwdt_miscdev); + if (res) { + printk (KERN_ERR PFX "failed to register misc device\n"); + goto out_nomisc; + } return 0; +out_nomisc: + unregister_reboot_notifier(&ibwdt_notifier); out_noreboot: release_region(WDT_START, 1); out_nostartreg: @@ -340,8 +348,6 @@ out_nostartreg: release_region(WDT_STOP, 1); #endif out_nostopreg: - misc_deregister(&ibwdt_miscdev); -out_nomisc: return res; } @@ -350,10 +356,10 @@ ibwdt_exit(void) { misc_deregister(&ibwdt_miscdev); unregister_reboot_notifier(&ibwdt_notifier); + release_region(WDT_START,1); #if WDT_START != WDT_STOP release_region(WDT_STOP,1); #endif - release_region(WDT_START,1); } module_init(ibwdt_init); -- cgit v0.10.2 From c9d7710ea2b497784314a916a39d4d390855a557 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Sat, 27 Jan 2007 22:07:03 +0100 Subject: [WATCHDOG] ib700wdt.c small clean-up's * Fix identation * Add watchdog "mandatory" WDIOC_GETBOOTSTATUS ioctl * On unexpected close -> since this is considered as a write to the watchdog device, make sure we ping a last time. Signed-off-by: Wim Van Sebroeck diff --git a/drivers/char/watchdog/ib700wdt.c b/drivers/char/watchdog/ib700wdt.c index d379bf0..3cec679 100644 --- a/drivers/char/watchdog/ib700wdt.c +++ b/drivers/char/watchdog/ib700wdt.c @@ -3,8 +3,8 @@ * * (c) Copyright 2001 Charles Howes * - * Based on advantechwdt.c which is based on acquirewdt.c which - * is based on wdt.c. + * Based on advantechwdt.c which is based on acquirewdt.c which + * is based on wdt.c. * * (c) Copyright 2000-2001 Marek Michalkiewicz * @@ -25,9 +25,9 @@ * * (c) Copyright 1995 Alan Cox * - * 14-Dec-2001 Matt Domsch - * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT - * Added timeout module option to override default + * 14-Dec-2001 Matt Domsch + * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT + * Added timeout module option to override default * */ @@ -201,6 +201,7 @@ ibwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, break; case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: return put_user(0, p); case WDIOC_KEEPALIVE: @@ -246,11 +247,12 @@ static int ibwdt_close(struct inode *inode, struct file *file) { spin_lock(&ibwdt_lock); - if (expect_close == 42) + if (expect_close == 42) { ibwdt_disable(); - else + } else { printk(KERN_CRIT PFX "WDT device closed unexpectedly. WDT will not stop!\n"); - + ibwdt_ping(); + } clear_bit(0, &ibwdt_is_open); expect_close = 0; spin_unlock(&ibwdt_lock); -- cgit v0.10.2 From e42162a46d948769c8b45d25ee81827bc7dac435 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Sat, 27 Jan 2007 22:12:54 +0100 Subject: [WATCHDOG] ib700wdt.c spinlock/WDIOC_SETOPTIONS changes Add the WDIOC_SETOPTIONS ioctl call. Because of this we move the spinlocking to the different watchdog operations. Signed-off-by: Wim Van Sebroeck diff --git a/drivers/char/watchdog/ib700wdt.c b/drivers/char/watchdog/ib700wdt.c index 3cec679..be61e47 100644 --- a/drivers/char/watchdog/ib700wdt.c +++ b/drivers/char/watchdog/ib700wdt.c @@ -128,14 +128,20 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" _ static void ibwdt_ping(void) { + spin_lock(&ibwdt_lock); + /* Write a watchdog value */ outb_p(wd_margin, WDT_START); + + spin_unlock(&ibwdt_lock); } static void ibwdt_disable(void) { + spin_lock(&ibwdt_lock); outb_p(0, WDT_STOP); + spin_unlock(&ibwdt_lock); } static int @@ -218,7 +224,26 @@ ibwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, case WDIOC_GETTIMEOUT: return put_user(wd_times[wd_margin], p); - break; + + case WDIOC_SETOPTIONS: + { + int options, retval = -EINVAL; + + if (get_user(options, p)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) { + ibwdt_disable(); + retval = 0; + } + + if (options & WDIOS_ENABLECARD) { + ibwdt_ping(); + retval = 0; + } + + return retval; + } default: return -ENOTTY; @@ -229,9 +254,7 @@ ibwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, static int ibwdt_open(struct inode *inode, struct file *file) { - spin_lock(&ibwdt_lock); if (test_and_set_bit(0, &ibwdt_is_open)) { - spin_unlock(&ibwdt_lock); return -EBUSY; } if (nowayout) @@ -239,14 +262,12 @@ ibwdt_open(struct inode *inode, struct file *file) /* Activate */ ibwdt_ping(); - spin_unlock(&ibwdt_lock); return nonseekable_open(inode, file); } static int ibwdt_close(struct inode *inode, struct file *file) { - spin_lock(&ibwdt_lock); if (expect_close == 42) { ibwdt_disable(); } else { @@ -255,7 +276,6 @@ ibwdt_close(struct inode *inode, struct file *file) } clear_bit(0, &ibwdt_is_open); expect_close = 0; - spin_unlock(&ibwdt_lock); return 0; } -- cgit v0.10.2 From 745ac1ea6e06125cc1326adbec34d756b25678c6 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Sat, 27 Jan 2007 22:39:46 +0100 Subject: [WATCHDOG] ib700wdt.c - convert to platform_device Convert the ib700wdt watchdog into a platform_device Signed-off-by: Wim Van Sebroeck diff --git a/drivers/char/watchdog/ib700wdt.c b/drivers/char/watchdog/ib700wdt.c index be61e47..b74e151 100644 --- a/drivers/char/watchdog/ib700wdt.c +++ b/drivers/char/watchdog/ib700wdt.c @@ -42,16 +42,20 @@ #include #include #include +#include #include #include #include +static struct platform_device *ibwdt_platform_device; static unsigned long ibwdt_is_open; static spinlock_t ibwdt_lock; static char expect_close; -#define PFX "ib700wdt: " +/* Module information */ +#define DRV_NAME "ib700wdt" +#define PFX DRV_NAME ": " /* * @@ -326,12 +330,10 @@ static struct notifier_block ibwdt_notifier = { * Init & exit routines */ -static int __init ibwdt_init(void) +static int __devinit ibwdt_probe(struct platform_device *dev) { int res; - printk(KERN_INFO PFX "WDT driver for IB700 single board computer initialising.\n"); - spin_lock_init(&ibwdt_lock); #if WDT_START != WDT_STOP @@ -373,8 +375,7 @@ out_nostopreg: return res; } -static void __exit -ibwdt_exit(void) +static int __devexit ibwdt_remove(struct platform_device *dev) { misc_deregister(&ibwdt_miscdev); unregister_reboot_notifier(&ibwdt_notifier); @@ -382,6 +383,46 @@ ibwdt_exit(void) #if WDT_START != WDT_STOP release_region(WDT_STOP,1); #endif + return 0; +} + +static struct platform_driver ibwdt_driver = { + .probe = ibwdt_probe, + .remove = __devexit_p(ibwdt_remove), + .driver = { + .owner = THIS_MODULE, + .name = DRV_NAME, + }, +}; + +static int __init ibwdt_init(void) +{ + int err; + + printk(KERN_INFO PFX "WDT driver for IB700 single board computer initialising.\n"); + + err = platform_driver_register(&ibwdt_driver); + if (err) + return err; + + ibwdt_platform_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0); + if (IS_ERR(ibwdt_platform_device)) { + err = PTR_ERR(ibwdt_platform_device); + goto unreg_platform_driver; + } + + return 0; + +unreg_platform_driver: + platform_driver_unregister(&ibwdt_driver); + return err; +} + +static void __exit ibwdt_exit(void) +{ + platform_device_unregister(ibwdt_platform_device); + platform_driver_unregister(&ibwdt_driver); + printk(KERN_INFO PFX "Watchdog Module Unloaded.\n"); } module_init(ibwdt_init); -- cgit v0.10.2 From 35fcf53870eaa6cc966604a6e36df1c2c1577540 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Sat, 27 Jan 2007 22:54:18 +0100 Subject: [WATCHDOG] ib700wdt.c - convert to platform_device part 2 Convert the reboot_notifier into the platform_device's shutdown method Signed-off-by: Wim Van Sebroeck diff --git a/drivers/char/watchdog/ib700wdt.c b/drivers/char/watchdog/ib700wdt.c index b74e151..c3a60f5 100644 --- a/drivers/char/watchdog/ib700wdt.c +++ b/drivers/char/watchdog/ib700wdt.c @@ -36,9 +36,7 @@ #include #include #include -#include #include -#include #include #include #include @@ -284,21 +282,6 @@ ibwdt_close(struct inode *inode, struct file *file) } /* - * Notifier for system down - */ - -static int -ibwdt_notify_sys(struct notifier_block *this, unsigned long code, - void *unused) -{ - if (code == SYS_DOWN || code == SYS_HALT) { - /* Turn the WDT off */ - ibwdt_disable(); - } - return NOTIFY_DONE; -} - -/* * Kernel Interfaces */ @@ -318,15 +301,6 @@ static struct miscdevice ibwdt_miscdev = { }; /* - * The WDT needs to learn about soft shutdowns in order to - * turn the timebomb registers off. - */ - -static struct notifier_block ibwdt_notifier = { - .notifier_call = ibwdt_notify_sys, -}; - -/* * Init & exit routines */ @@ -350,12 +324,6 @@ static int __devinit ibwdt_probe(struct platform_device *dev) goto out_nostartreg; } - res = register_reboot_notifier(&ibwdt_notifier); - if (res) { - printk (KERN_ERR PFX "Failed to register reboot notifier.\n"); - goto out_noreboot; - } - res = misc_register(&ibwdt_miscdev); if (res) { printk (KERN_ERR PFX "failed to register misc device\n"); @@ -364,8 +332,6 @@ static int __devinit ibwdt_probe(struct platform_device *dev) return 0; out_nomisc: - unregister_reboot_notifier(&ibwdt_notifier); -out_noreboot: release_region(WDT_START, 1); out_nostartreg: #if WDT_START != WDT_STOP @@ -378,7 +344,6 @@ out_nostopreg: static int __devexit ibwdt_remove(struct platform_device *dev) { misc_deregister(&ibwdt_miscdev); - unregister_reboot_notifier(&ibwdt_notifier); release_region(WDT_START,1); #if WDT_START != WDT_STOP release_region(WDT_STOP,1); @@ -386,9 +351,16 @@ static int __devexit ibwdt_remove(struct platform_device *dev) return 0; } +static void ibwdt_shutdown(struct platform_device *dev) +{ + /* Turn the WDT off if we have a soft shutdown */ + ibwdt_disable(); +} + static struct platform_driver ibwdt_driver = { .probe = ibwdt_probe, .remove = __devexit_p(ibwdt_remove), + .shutdown = ibwdt_shutdown, .driver = { .owner = THIS_MODULE, .name = DRV_NAME, -- cgit v0.10.2 From 0316fe8319ff62e527d0d91a3bc7df1c59eafae8 Mon Sep 17 00:00:00 2001 From: Zwane Mwaikambo Date: Mon, 29 Jan 2007 21:20:31 -0800 Subject: [AGPGART] compat ioctl The following video card requires the agpgart driver ioctl interface in order to detect video memory. 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03) Tested on a Thinkpad Z61t, Xorg.0.log from a 32bit debian Xorg is at; http://montezuma.homeunix.net/Xorg.0.log Signed-off-by: Zwane Mwaikambo Signed-off-by: Dave Jones diff --git a/drivers/char/agp/Makefile b/drivers/char/agp/Makefile index 3e58160..a0d04a2 100644 --- a/drivers/char/agp/Makefile +++ b/drivers/char/agp/Makefile @@ -1,6 +1,7 @@ agpgart-y := backend.o frontend.o generic.o isoch.o obj-$(CONFIG_AGP) += agpgart.o +obj-$(CONFIG_COMPAT) += compat_ioctl.o obj-$(CONFIG_AGP_ALI) += ali-agp.o obj-$(CONFIG_AGP_ATI) += ati-agp.o obj-$(CONFIG_AGP_AMD) += amd-k7-agp.o diff --git a/drivers/char/agp/agp.h b/drivers/char/agp/agp.h index 1d59e2a..7fc72d1 100644 --- a/drivers/char/agp/agp.h +++ b/drivers/char/agp/agp.h @@ -288,6 +288,8 @@ extern struct aper_size_info_16 agp3_generic_sizes[]; extern int agp_off; extern int agp_try_unsupported_boot; +long compat_agp_ioctl(struct file *file, unsigned int cmd, unsigned long arg); + /* Chipset independant registers (from AGP Spec) */ #define AGP_APBASE 0x10 diff --git a/drivers/char/agp/compat_ioctl.c b/drivers/char/agp/compat_ioctl.c new file mode 100644 index 0000000..fcb4b1b --- /dev/null +++ b/drivers/char/agp/compat_ioctl.c @@ -0,0 +1,282 @@ +/* + * AGPGART driver frontend compatibility ioctls + * Copyright (C) 2004 Silicon Graphics, Inc. + * Copyright (C) 2002-2003 Dave Jones + * Copyright (C) 1999 Jeff Hartmann + * Copyright (C) 1999 Precision Insight, Inc. + * Copyright (C) 1999 Xi Graphics, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included + * in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS + * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * JEFF HARTMANN, OR ANY OTHER CONTRIBUTORS BE LIABLE FOR ANY CLAIM, + * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR + * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE + * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + */ + +#include +#include +#include +#include +#include "agp.h" +#include "compat_ioctl.h" + +static int compat_agpioc_info_wrap(struct agp_file_private *priv, void __user *arg) +{ + struct agp_info32 userinfo; + struct agp_kern_info kerninfo; + + agp_copy_info(agp_bridge, &kerninfo); + + userinfo.version.major = kerninfo.version.major; + userinfo.version.minor = kerninfo.version.minor; + userinfo.bridge_id = kerninfo.device->vendor | + (kerninfo.device->device << 16); + userinfo.agp_mode = kerninfo.mode; + userinfo.aper_base = (compat_long_t)kerninfo.aper_base; + userinfo.aper_size = kerninfo.aper_size; + userinfo.pg_total = userinfo.pg_system = kerninfo.max_memory; + userinfo.pg_used = kerninfo.current_memory; + + if (copy_to_user(arg, &userinfo, sizeof(userinfo))) + return -EFAULT; + + return 0; +} + +static int compat_agpioc_reserve_wrap(struct agp_file_private *priv, void __user *arg) +{ + struct agp_region32 ureserve; + struct agp_region kreserve; + struct agp_client *client; + struct agp_file_private *client_priv; + + DBG(""); + if (copy_from_user(&ureserve, arg, sizeof(ureserve))) + return -EFAULT; + + if ((unsigned) ureserve.seg_count >= ~0U/sizeof(struct agp_segment32)) + return -EFAULT; + + kreserve.pid = ureserve.pid; + kreserve.seg_count = ureserve.seg_count; + + client = agp_find_client_by_pid(kreserve.pid); + + if (kreserve.seg_count == 0) { + /* remove a client */ + client_priv = agp_find_private(kreserve.pid); + + if (client_priv != NULL) { + set_bit(AGP_FF_IS_CLIENT, &client_priv->access_flags); + set_bit(AGP_FF_IS_VALID, &client_priv->access_flags); + } + if (client == NULL) { + /* client is already removed */ + return 0; + } + return agp_remove_client(kreserve.pid); + } else { + struct agp_segment32 *usegment; + struct agp_segment *ksegment; + int seg; + + if (ureserve.seg_count >= 16384) + return -EINVAL; + + usegment = kmalloc(sizeof(*usegment) * ureserve.seg_count, GFP_KERNEL); + if (!usegment) + return -ENOMEM; + + ksegment = kmalloc(sizeof(*ksegment) * kreserve.seg_count, GFP_KERNEL); + if (!ksegment) { + kfree(usegment); + return -ENOMEM; + } + + if (copy_from_user(usegment, (void __user *) ureserve.seg_list, + sizeof(*usegment) * ureserve.seg_count)) { + kfree(usegment); + kfree(ksegment); + return -EFAULT; + } + + for (seg = 0; seg < ureserve.seg_count; seg++) { + ksegment[seg].pg_start = usegment[seg].pg_start; + ksegment[seg].pg_count = usegment[seg].pg_count; + ksegment[seg].prot = usegment[seg].prot; + } + + kfree(usegment); + kreserve.seg_list = ksegment; + + if (client == NULL) { + /* Create the client and add the segment */ + client = agp_create_client(kreserve.pid); + + if (client == NULL) { + kfree(ksegment); + return -ENOMEM; + } + client_priv = agp_find_private(kreserve.pid); + + if (client_priv != NULL) { + set_bit(AGP_FF_IS_CLIENT, &client_priv->access_flags); + set_bit(AGP_FF_IS_VALID, &client_priv->access_flags); + } + } + return agp_create_segment(client, &kreserve); + } + /* Will never really happen */ + return -EINVAL; +} + +static int compat_agpioc_allocate_wrap(struct agp_file_private *priv, void __user *arg) +{ + struct agp_memory *memory; + struct agp_allocate32 alloc; + + DBG(""); + if (copy_from_user(&alloc, arg, sizeof(alloc))) + return -EFAULT; + + memory = agp_allocate_memory_wrap(alloc.pg_count, alloc.type); + + if (memory == NULL) + return -ENOMEM; + + alloc.key = memory->key; + alloc.physical = memory->physical; + + if (copy_to_user(arg, &alloc, sizeof(alloc))) { + agp_free_memory_wrap(memory); + return -EFAULT; + } + return 0; +} + +static int compat_agpioc_bind_wrap(struct agp_file_private *priv, void __user *arg) +{ + struct agp_bind32 bind_info; + struct agp_memory *memory; + + DBG(""); + if (copy_from_user(&bind_info, arg, sizeof(bind_info))) + return -EFAULT; + + memory = agp_find_mem_by_key(bind_info.key); + + if (memory == NULL) + return -EINVAL; + + return agp_bind_memory(memory, bind_info.pg_start); +} + +static int compat_agpioc_unbind_wrap(struct agp_file_private *priv, void __user *arg) +{ + struct agp_memory *memory; + struct agp_unbind32 unbind; + + DBG(""); + if (copy_from_user(&unbind, arg, sizeof(unbind))) + return -EFAULT; + + memory = agp_find_mem_by_key(unbind.key); + + if (memory == NULL) + return -EINVAL; + + return agp_unbind_memory(memory); +} + +long compat_agp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + struct agp_file_private *curr_priv = file->private_data; + int ret_val = -ENOTTY; + + mutex_lock(&(agp_fe.agp_mutex)); + + if ((agp_fe.current_controller == NULL) && + (cmd != AGPIOC_ACQUIRE32)) { + ret_val = -EINVAL; + goto ioctl_out; + } + if ((agp_fe.backend_acquired != TRUE) && + (cmd != AGPIOC_ACQUIRE32)) { + ret_val = -EBUSY; + goto ioctl_out; + } + if (cmd != AGPIOC_ACQUIRE32) { + if (!(test_bit(AGP_FF_IS_CONTROLLER, &curr_priv->access_flags))) { + ret_val = -EPERM; + goto ioctl_out; + } + /* Use the original pid of the controller, + * in case it's threaded */ + + if (agp_fe.current_controller->pid != curr_priv->my_pid) { + ret_val = -EBUSY; + goto ioctl_out; + } + } + + switch (cmd) { + case AGPIOC_INFO32: + ret_val = compat_agpioc_info_wrap(curr_priv, (void __user *) arg); + break; + + case AGPIOC_ACQUIRE32: + ret_val = agpioc_acquire_wrap(curr_priv); + break; + + case AGPIOC_RELEASE32: + ret_val = agpioc_release_wrap(curr_priv); + break; + + case AGPIOC_SETUP32: + ret_val = agpioc_setup_wrap(curr_priv, (void __user *) arg); + break; + + case AGPIOC_RESERVE32: + ret_val = compat_agpioc_reserve_wrap(curr_priv, (void __user *) arg); + break; + + case AGPIOC_PROTECT32: + ret_val = agpioc_protect_wrap(curr_priv); + break; + + case AGPIOC_ALLOCATE32: + ret_val = compat_agpioc_allocate_wrap(curr_priv, (void __user *) arg); + break; + + case AGPIOC_DEALLOCATE32: + ret_val = agpioc_deallocate_wrap(curr_priv, (int) arg); + break; + + case AGPIOC_BIND32: + ret_val = compat_agpioc_bind_wrap(curr_priv, (void __user *) arg); + break; + + case AGPIOC_UNBIND32: + ret_val = compat_agpioc_unbind_wrap(curr_priv, (void __user *) arg); + break; + } + +ioctl_out: + DBG("ioctl returns %d\n", ret_val); + mutex_unlock(&(agp_fe.agp_mutex)); + return ret_val; +} + diff --git a/drivers/char/agp/compat_ioctl.h b/drivers/char/agp/compat_ioctl.h new file mode 100644 index 0000000..71939d6 --- /dev/null +++ b/drivers/char/agp/compat_ioctl.h @@ -0,0 +1,105 @@ +/* + * Copyright (C) 1999 Jeff Hartmann + * Copyright (C) 1999 Precision Insight, Inc. + * Copyright (C) 1999 Xi Graphics, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included + * in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS + * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * JEFF HARTMANN, OR ANY OTHER CONTRIBUTORS BE LIABLE FOR ANY CLAIM, + * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR + * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE + * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + */ + +#ifndef _AGP_COMPAT_IOCTL_H +#define _AGP_COMPAT_IOCTL_H + +#include +#include + +#define AGPIOC_INFO32 _IOR (AGPIOC_BASE, 0, compat_uptr_t) +#define AGPIOC_ACQUIRE32 _IO (AGPIOC_BASE, 1) +#define AGPIOC_RELEASE32 _IO (AGPIOC_BASE, 2) +#define AGPIOC_SETUP32 _IOW (AGPIOC_BASE, 3, compat_uptr_t) +#define AGPIOC_RESERVE32 _IOW (AGPIOC_BASE, 4, compat_uptr_t) +#define AGPIOC_PROTECT32 _IOW (AGPIOC_BASE, 5, compat_uptr_t) +#define AGPIOC_ALLOCATE32 _IOWR(AGPIOC_BASE, 6, compat_uptr_t) +#define AGPIOC_DEALLOCATE32 _IOW (AGPIOC_BASE, 7, compat_int_t) +#define AGPIOC_BIND32 _IOW (AGPIOC_BASE, 8, compat_uptr_t) +#define AGPIOC_UNBIND32 _IOW (AGPIOC_BASE, 9, compat_uptr_t) + +struct agp_info32 { + struct agp_version version; /* version of the driver */ + u32 bridge_id; /* bridge vendor/device */ + u32 agp_mode; /* mode info of bridge */ + compat_long_t aper_base; /* base of aperture */ + compat_size_t aper_size; /* size of aperture */ + compat_size_t pg_total; /* max pages (swap + system) */ + compat_size_t pg_system; /* max pages (system) */ + compat_size_t pg_used; /* current pages used */ +}; + +/* + * The "prot" down below needs still a "sleep" flag somehow ... + */ +struct agp_segment32 { + compat_off_t pg_start; /* starting page to populate */ + compat_size_t pg_count; /* number of pages */ + compat_int_t prot; /* prot flags for mmap */ +}; + +struct agp_region32 { + compat_pid_t pid; /* pid of process */ + compat_size_t seg_count; /* number of segments */ + struct agp_segment32 *seg_list; +}; + +struct agp_allocate32 { + compat_int_t key; /* tag of allocation */ + compat_size_t pg_count; /* number of pages */ + u32 type; /* 0 == normal, other devspec */ + u32 physical; /* device specific (some devices + * need a phys address of the + * actual page behind the gatt + * table) */ +}; + +struct agp_bind32 { + compat_int_t key; /* tag of allocation */ + compat_off_t pg_start; /* starting page to populate */ +}; + +struct agp_unbind32 { + compat_int_t key; /* tag of allocation */ + u32 priority; /* priority for paging out */ +}; + +extern struct agp_front_data agp_fe; + +int agpioc_acquire_wrap(struct agp_file_private *priv); +int agpioc_release_wrap(struct agp_file_private *priv); +int agpioc_protect_wrap(struct agp_file_private *priv); +int agpioc_setup_wrap(struct agp_file_private *priv, void __user *arg); +int agpioc_deallocate_wrap(struct agp_file_private *priv, int arg); +struct agp_file_private *agp_find_private(pid_t pid); +struct agp_client *agp_create_client(pid_t id); +int agp_remove_client(pid_t id); +int agp_create_segment(struct agp_client *client, struct agp_region *region); +void agp_free_memory_wrap(struct agp_memory *memory); +struct agp_memory *agp_allocate_memory_wrap(size_t pg_count, u32 type); +struct agp_memory *agp_find_mem_by_key(int key); +struct agp_client *agp_find_client_by_pid(pid_t id); + +#endif /* _AGP_COMPAT_H */ diff --git a/drivers/char/agp/frontend.c b/drivers/char/agp/frontend.c index 0f2ed2a..ee06f38 100644 --- a/drivers/char/agp/frontend.c +++ b/drivers/char/agp/frontend.c @@ -41,9 +41,9 @@ #include #include "agp.h" -static struct agp_front_data agp_fe; +struct agp_front_data agp_fe; -static struct agp_memory *agp_find_mem_by_key(int key) +struct agp_memory *agp_find_mem_by_key(int key) { struct agp_memory *curr; @@ -159,7 +159,7 @@ static pgprot_t agp_convert_mmap_flags(int prot) return vm_get_page_prot(prot_bits); } -static int agp_create_segment(struct agp_client *client, struct agp_region *region) +int agp_create_segment(struct agp_client *client, struct agp_region *region) { struct agp_segment_priv **ret_seg; struct agp_segment_priv *seg; @@ -211,7 +211,7 @@ static void agp_insert_into_pool(struct agp_memory * temp) /* File private list routines */ -static struct agp_file_private *agp_find_private(pid_t pid) +struct agp_file_private *agp_find_private(pid_t pid) { struct agp_file_private *curr; @@ -266,13 +266,13 @@ static void agp_remove_file_private(struct agp_file_private * priv) * Wrappers for agp_free_memory & agp_allocate_memory * These make sure that internal lists are kept updated. */ -static void agp_free_memory_wrap(struct agp_memory *memory) +void agp_free_memory_wrap(struct agp_memory *memory) { agp_remove_from_pool(memory); agp_free_memory(memory); } -static struct agp_memory *agp_allocate_memory_wrap(size_t pg_count, u32 type) +struct agp_memory *agp_allocate_memory_wrap(size_t pg_count, u32 type) { struct agp_memory *memory; @@ -484,7 +484,7 @@ static struct agp_controller *agp_find_controller_for_client(pid_t id) return NULL; } -static struct agp_client *agp_find_client_by_pid(pid_t id) +struct agp_client *agp_find_client_by_pid(pid_t id) { struct agp_client *temp; @@ -509,7 +509,7 @@ static void agp_insert_client(struct agp_client *client) agp_fe.current_controller->num_clients++; } -static struct agp_client *agp_create_client(pid_t id) +struct agp_client *agp_create_client(pid_t id) { struct agp_client *new_client; @@ -522,7 +522,7 @@ static struct agp_client *agp_create_client(pid_t id) return new_client; } -static int agp_remove_client(pid_t id) +int agp_remove_client(pid_t id) { struct agp_client *client; struct agp_client *prev_client; @@ -746,7 +746,7 @@ static int agpioc_info_wrap(struct agp_file_private *priv, void __user *arg) return 0; } -static int agpioc_acquire_wrap(struct agp_file_private *priv) +int agpioc_acquire_wrap(struct agp_file_private *priv) { struct agp_controller *controller; @@ -789,14 +789,14 @@ static int agpioc_acquire_wrap(struct agp_file_private *priv) return 0; } -static int agpioc_release_wrap(struct agp_file_private *priv) +int agpioc_release_wrap(struct agp_file_private *priv) { DBG(""); agp_controller_release_current(agp_fe.current_controller, priv); return 0; } -static int agpioc_setup_wrap(struct agp_file_private *priv, void __user *arg) +int agpioc_setup_wrap(struct agp_file_private *priv, void __user *arg) { struct agp_setup mode; @@ -876,7 +876,7 @@ static int agpioc_reserve_wrap(struct agp_file_private *priv, void __user *arg) return -EINVAL; } -static int agpioc_protect_wrap(struct agp_file_private *priv) +int agpioc_protect_wrap(struct agp_file_private *priv) { DBG(""); /* This function is not currently implemented */ @@ -907,7 +907,7 @@ static int agpioc_allocate_wrap(struct agp_file_private *priv, void __user *arg) return 0; } -static int agpioc_deallocate_wrap(struct agp_file_private *priv, int arg) +int agpioc_deallocate_wrap(struct agp_file_private *priv, int arg) { struct agp_memory *memory; @@ -1043,6 +1043,9 @@ static const struct file_operations agp_fops = .read = agp_read, .write = agp_write, .ioctl = agp_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = compat_agp_ioctl, +#endif .mmap = agp_mmap, .open = agp_open, .release = agp_release, -- cgit v0.10.2 From a030ce4477baa06dd9c037ccd3c8d171aac9ed44 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Tue, 23 Jan 2007 10:33:43 +0100 Subject: [AGPGART] Allow drm-populated agp memory types This patch allows drm to populate an agpgart structure with pages of its own. It's needed for the new drm memory manager which dynamically flips pages in and out of AGP. The patch modifies the generic functions as well as the intel agp driver. The intel drm driver is currently the only one supporting the new memory manager. Other agp drivers may need some minor fixing up once they have a corresponding memory manager enabled drm driver. AGP memory types >= AGP_USER_TYPES are not populated by the agpgart driver, but the drm is expected to do that, as well as taking care of cache- and tlb flushing when needed. It's not possible to request these types from user space using agpgart ioctls. The Intel driver also gets a new memory type for pages that can be bound cached to the intel GTT. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Jones diff --git a/drivers/char/agp/agp.h b/drivers/char/agp/agp.h index 7fc72d1..9bd68d9 100644 --- a/drivers/char/agp/agp.h +++ b/drivers/char/agp/agp.h @@ -114,6 +114,7 @@ struct agp_bridge_driver { void (*free_by_type)(struct agp_memory *); void *(*agp_alloc_page)(struct agp_bridge_data *); void (*agp_destroy_page)(void *); + int (*agp_type_to_mask_type) (struct agp_bridge_data *, int); }; struct agp_bridge_data { @@ -218,6 +219,7 @@ struct agp_bridge_data { #define I810_PTE_MAIN_UNCACHED 0x00000000 #define I810_PTE_LOCAL 0x00000002 #define I810_PTE_VALID 0x00000001 +#define I830_PTE_SYSTEM_CACHED 0x00000006 #define I810_SMRAM_MISCC 0x70 #define I810_GFX_MEM_WIN_SIZE 0x00010000 #define I810_GFX_MEM_WIN_32M 0x00010000 @@ -270,8 +272,16 @@ void global_cache_flush(void); void get_agp_version(struct agp_bridge_data *bridge); unsigned long agp_generic_mask_memory(struct agp_bridge_data *bridge, unsigned long addr, int type); +int agp_generic_type_to_mask_type(struct agp_bridge_data *bridge, + int type); struct agp_bridge_data *agp_generic_find_bridge(struct pci_dev *pdev); +/* generic functions for user-populated AGP memory types */ +struct agp_memory *agp_generic_alloc_user(size_t page_count, int type); +void agp_alloc_page_array(size_t size, struct agp_memory *mem); +void agp_free_page_array(struct agp_memory *mem); + + /* generic routines for agp>=3 */ int agp3_generic_fetch_size(void); void agp3_generic_tlbflush(struct agp_memory *mem); diff --git a/drivers/char/agp/ali-agp.c b/drivers/char/agp/ali-agp.c index 5a31ec7..98177a9 100644 --- a/drivers/char/agp/ali-agp.c +++ b/drivers/char/agp/ali-agp.c @@ -214,6 +214,7 @@ static struct agp_bridge_driver ali_generic_bridge = { .free_by_type = agp_generic_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = ali_destroy_page, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, }; static struct agp_bridge_driver ali_m1541_bridge = { @@ -237,6 +238,7 @@ static struct agp_bridge_driver ali_m1541_bridge = { .free_by_type = agp_generic_free_by_type, .agp_alloc_page = m1541_alloc_page, .agp_destroy_page = m1541_destroy_page, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, }; diff --git a/drivers/char/agp/alpha-agp.c b/drivers/char/agp/alpha-agp.c index b4e00a3..b0acf41 100644 --- a/drivers/char/agp/alpha-agp.c +++ b/drivers/char/agp/alpha-agp.c @@ -91,6 +91,9 @@ static int alpha_core_agp_insert_memory(struct agp_memory *mem, off_t pg_start, int num_entries, status; void *temp; + if (type >= AGP_USER_TYPES || mem->type >= AGP_USER_TYPES) + return -EINVAL; + temp = agp_bridge->current_size; num_entries = A_SIZE_FIX(temp)->num_entries; if ((pg_start + mem->page_count) > num_entries) @@ -142,6 +145,7 @@ struct agp_bridge_driver alpha_core_agp_driver = { .free_by_type = agp_generic_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, }; struct agp_bridge_data *alpha_bridge; diff --git a/drivers/char/agp/amd-k7-agp.c b/drivers/char/agp/amd-k7-agp.c index c85c8ca..3d8d448 100644 --- a/drivers/char/agp/amd-k7-agp.c +++ b/drivers/char/agp/amd-k7-agp.c @@ -381,6 +381,7 @@ static struct agp_bridge_driver amd_irongate_driver = { .free_by_type = agp_generic_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, }; static struct agp_device_ids amd_agp_device_ids[] __devinitdata = diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index 93d2209..636d984 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -62,12 +62,18 @@ static int amd64_insert_memory(struct agp_memory *mem, off_t pg_start, int type) { int i, j, num_entries; long long tmp; + int mask_type; + struct agp_bridge_data *bridge = mem->bridge; u32 pte; num_entries = agp_num_entries(); - if (type != 0 || mem->type != 0) + if (type != mem->type) return -EINVAL; + mask_type = bridge->driver->agp_type_to_mask_type(bridge, type); + if (mask_type != 0) + return -EINVAL; + /* Make sure we can fit the range in the gatt table. */ /* FIXME: could wrap */ @@ -90,7 +96,7 @@ static int amd64_insert_memory(struct agp_memory *mem, off_t pg_start, int type) for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { tmp = agp_bridge->driver->mask_memory(agp_bridge, - mem->memory[i], mem->type); + mem->memory[i], mask_type); BUG_ON(tmp & 0xffffff0000000ffcULL); pte = (tmp & 0x000000ff00000000ULL) >> 28; @@ -247,6 +253,7 @@ static struct agp_bridge_driver amd_8151_driver = { .free_by_type = agp_generic_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, }; /* Some basic sanity checks for the aperture. */ diff --git a/drivers/char/agp/ati-agp.c b/drivers/char/agp/ati-agp.c index 9987dc2..77c9ad6 100644 --- a/drivers/char/agp/ati-agp.c +++ b/drivers/char/agp/ati-agp.c @@ -431,6 +431,7 @@ static struct agp_bridge_driver ati_generic_bridge = { .free_by_type = agp_generic_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, }; diff --git a/drivers/char/agp/backend.c b/drivers/char/agp/backend.c index d59e037..ebdd6dd 100644 --- a/drivers/char/agp/backend.c +++ b/drivers/char/agp/backend.c @@ -43,7 +43,7 @@ * fix some real stupidity. It's only by chance we can bump * past 0.99 at all due to some boolean logic error. */ #define AGPGART_VERSION_MAJOR 0 -#define AGPGART_VERSION_MINOR 101 +#define AGPGART_VERSION_MINOR 102 static const struct agp_version agp_current_version = { .major = AGPGART_VERSION_MAJOR, diff --git a/drivers/char/agp/efficeon-agp.c b/drivers/char/agp/efficeon-agp.c index 30f730f..658cb1a 100644 --- a/drivers/char/agp/efficeon-agp.c +++ b/drivers/char/agp/efficeon-agp.c @@ -335,6 +335,7 @@ static struct agp_bridge_driver efficeon_driver = { .free_by_type = agp_generic_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, }; static int __devinit agp_efficeon_probe(struct pci_dev *pdev, diff --git a/drivers/char/agp/frontend.c b/drivers/char/agp/frontend.c index ee06f38..679d7f9 100644 --- a/drivers/char/agp/frontend.c +++ b/drivers/char/agp/frontend.c @@ -892,6 +892,9 @@ static int agpioc_allocate_wrap(struct agp_file_private *priv, void __user *arg) if (copy_from_user(&alloc, arg, sizeof(struct agp_allocate))) return -EFAULT; + if (alloc.type >= AGP_USER_TYPES) + return -EINVAL; + memory = agp_allocate_memory_wrap(alloc.pg_count, alloc.type); if (memory == NULL) diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c index 3491d6f..a627b77 100644 --- a/drivers/char/agp/generic.c +++ b/drivers/char/agp/generic.c @@ -101,6 +101,67 @@ static int agp_get_key(void) return -1; } +/* + * Use kmalloc if possible for the page list. Otherwise fall back to + * vmalloc. This speeds things up and also saves memory for small AGP + * regions. + */ + +void agp_alloc_page_array(size_t size, struct agp_memory *mem) +{ + mem->memory = NULL; + mem->vmalloc_flag = 0; + + if (size <= 2*PAGE_SIZE) { + mem->memory = kmalloc(size, GFP_KERNEL | __GFP_NORETRY); + } + if (mem->memory == NULL) { + mem->memory = vmalloc(size); + mem->vmalloc_flag = 1; + } +} +EXPORT_SYMBOL(agp_alloc_page_array); + +void agp_free_page_array(struct agp_memory *mem) +{ + if (mem->vmalloc_flag) { + vfree(mem->memory); + } else { + kfree(mem->memory); + } +} +EXPORT_SYMBOL(agp_free_page_array); + + +static struct agp_memory *agp_create_user_memory(unsigned long num_agp_pages) +{ + struct agp_memory *new; + unsigned long alloc_size = num_agp_pages*sizeof(struct page *); + + new = kmalloc(sizeof(struct agp_memory), GFP_KERNEL); + + if (new == NULL) + return NULL; + + memset(new, 0, sizeof(struct agp_memory)); + new->key = agp_get_key(); + + if (new->key < 0) { + kfree(new); + return NULL; + } + + agp_alloc_page_array(alloc_size, new); + + if (new->memory == NULL) { + agp_free_key(new->key); + kfree(new); + return NULL; + } + new->num_scratch_pages = 0; + return new; +} + struct agp_memory *agp_create_memory(int scratch_pages) { @@ -116,7 +177,8 @@ struct agp_memory *agp_create_memory(int scratch_pages) kfree(new); return NULL; } - new->memory = vmalloc(PAGE_SIZE * scratch_pages); + + agp_alloc_page_array(PAGE_SIZE * scratch_pages, new); if (new->memory == NULL) { agp_free_key(new->key); @@ -124,6 +186,7 @@ struct agp_memory *agp_create_memory(int scratch_pages) return NULL; } new->num_scratch_pages = scratch_pages; + new->type = AGP_NORMAL_MEMORY; return new; } EXPORT_SYMBOL(agp_create_memory); @@ -146,6 +209,11 @@ void agp_free_memory(struct agp_memory *curr) if (curr->is_bound == TRUE) agp_unbind_memory(curr); + if (curr->type >= AGP_USER_TYPES) { + agp_generic_free_by_type(curr); + return; + } + if (curr->type != 0) { curr->bridge->driver->free_by_type(curr); return; @@ -157,7 +225,7 @@ void agp_free_memory(struct agp_memory *curr) flush_agp_mappings(); } agp_free_key(curr->key); - vfree(curr->memory); + agp_free_page_array(curr); kfree(curr); } EXPORT_SYMBOL(agp_free_memory); @@ -188,6 +256,13 @@ struct agp_memory *agp_allocate_memory(struct agp_bridge_data *bridge, if ((atomic_read(&bridge->current_memory_agp) + page_count) > bridge->max_memory_agp) return NULL; + if (type >= AGP_USER_TYPES) { + new = agp_generic_alloc_user(page_count, type); + if (new) + new->bridge = bridge; + return new; + } + if (type != 0) { new = bridge->driver->alloc_by_type(page_count, type); if (new) @@ -960,6 +1035,7 @@ int agp_generic_insert_memory(struct agp_memory * mem, off_t pg_start, int type) off_t j; void *temp; struct agp_bridge_data *bridge; + int mask_type; bridge = mem->bridge; if (!bridge) @@ -995,7 +1071,12 @@ int agp_generic_insert_memory(struct agp_memory * mem, off_t pg_start, int type) num_entries -= agp_memory_reserved/PAGE_SIZE; if (num_entries < 0) num_entries = 0; - if (type != 0 || mem->type != 0) { + if (type != mem->type) { + return -EINVAL; + } + + mask_type = bridge->driver->agp_type_to_mask_type(bridge, type); + if (mask_type != 0) { /* The generic routines know nothing of memory types */ return -EINVAL; } @@ -1018,7 +1099,8 @@ int agp_generic_insert_memory(struct agp_memory * mem, off_t pg_start, int type) } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { - writel(bridge->driver->mask_memory(bridge, mem->memory[i], mem->type), bridge->gatt_table+j); + writel(bridge->driver->mask_memory(bridge, mem->memory[i], mask_type), + bridge->gatt_table+j); } readl(bridge->gatt_table+j-1); /* PCI Posting. */ @@ -1032,6 +1114,7 @@ int agp_generic_remove_memory(struct agp_memory *mem, off_t pg_start, int type) { size_t i; struct agp_bridge_data *bridge; + int mask_type; bridge = mem->bridge; if (!bridge) @@ -1040,7 +1123,11 @@ int agp_generic_remove_memory(struct agp_memory *mem, off_t pg_start, int type) if (mem->page_count == 0) return 0; - if (type != 0 || mem->type != 0) { + if (type != mem->type) + return -EINVAL; + + mask_type = bridge->driver->agp_type_to_mask_type(bridge, type); + if (mask_type != 0) { /* The generic routines know nothing of memory types */ return -EINVAL; } @@ -1066,12 +1153,34 @@ EXPORT_SYMBOL(agp_generic_alloc_by_type); void agp_generic_free_by_type(struct agp_memory *curr) { - vfree(curr->memory); + agp_free_page_array(curr); agp_free_key(curr->key); kfree(curr); } EXPORT_SYMBOL(agp_generic_free_by_type); +struct agp_memory *agp_generic_alloc_user(size_t page_count, int type) +{ + struct agp_memory *new; + int i; + int pages; + + pages = (page_count + ENTRIES_PER_PAGE - 1) / ENTRIES_PER_PAGE; + new = agp_create_user_memory(page_count); + if (new == NULL) + return NULL; + + for (i = 0; i < page_count; i++) { + new->memory[i] = 0; + } + new->page_count = 0; + new->type = type; + new->num_scratch_pages = pages; + + return new; +} +EXPORT_SYMBOL(agp_generic_alloc_user); + /* * Basic Page Allocation Routines - @@ -1165,6 +1274,15 @@ unsigned long agp_generic_mask_memory(struct agp_bridge_data *bridge, } EXPORT_SYMBOL(agp_generic_mask_memory); +int agp_generic_type_to_mask_type(struct agp_bridge_data *bridge, + int type) +{ + if (type >= AGP_USER_TYPES) + return 0; + return type; +} +EXPORT_SYMBOL(agp_generic_type_to_mask_type); + /* * These functions are implemented according to the AGPv3 spec, * which covers implementation details that had previously been diff --git a/drivers/char/agp/hp-agp.c b/drivers/char/agp/hp-agp.c index 907fb66..847deab 100644 --- a/drivers/char/agp/hp-agp.c +++ b/drivers/char/agp/hp-agp.c @@ -438,6 +438,7 @@ struct agp_bridge_driver hp_zx1_driver = { .free_by_type = agp_generic_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, .cant_use_aperture = 1, }; diff --git a/drivers/char/agp/i460-agp.c b/drivers/char/agp/i460-agp.c index 9176944..3e76186 100644 --- a/drivers/char/agp/i460-agp.c +++ b/drivers/char/agp/i460-agp.c @@ -293,6 +293,9 @@ static int i460_insert_memory_small_io_page (struct agp_memory *mem, pr_debug("i460_insert_memory_small_io_page(mem=%p, pg_start=%ld, type=%d, paddr0=0x%lx)\n", mem, pg_start, type, mem->memory[0]); + if (type >= AGP_USER_TYPES || mem->type >= AGP_USER_TYPES) + return -EINVAL; + io_pg_start = I460_IOPAGES_PER_KPAGE * pg_start; temp = agp_bridge->current_size; @@ -396,6 +399,9 @@ static int i460_insert_memory_large_io_page (struct agp_memory *mem, struct lp_desc *start, *end, *lp; void *temp; + if (type >= AGP_USER_TYPES || mem->type >= AGP_USER_TYPES) + return -EINVAL; + temp = agp_bridge->current_size; num_entries = A_SIZE_8(temp)->num_entries; @@ -572,6 +578,7 @@ struct agp_bridge_driver intel_i460_driver = { #endif .alloc_by_type = agp_generic_alloc_by_type, .free_by_type = agp_generic_free_by_type, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, .cant_use_aperture = 1, }; diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index a3011de..4e455f0 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -24,6 +24,9 @@ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82965G_HB) +extern int agp_memory_reserved; + + /* Intel 815 register */ #define INTEL_815_APCONT 0x51 #define INTEL_815_ATTBASE_MASK ~0x1FFFFFFF @@ -68,12 +71,15 @@ static struct aper_size_info_fixed intel_i810_sizes[] = #define AGP_DCACHE_MEMORY 1 #define AGP_PHYS_MEMORY 2 +#define INTEL_AGP_CACHED_MEMORY 3 static struct gatt_mask intel_i810_masks[] = { {.mask = I810_PTE_VALID, .type = 0}, {.mask = (I810_PTE_VALID | I810_PTE_LOCAL), .type = AGP_DCACHE_MEMORY}, - {.mask = I810_PTE_VALID, .type = 0} + {.mask = I810_PTE_VALID, .type = 0}, + {.mask = I810_PTE_VALID | I830_PTE_SYSTEM_CACHED, + .type = INTEL_AGP_CACHED_MEMORY} }; static struct _intel_i810_private { @@ -82,6 +88,7 @@ static struct _intel_i810_private { int num_dcache_entries; } intel_i810_private; + static int intel_i810_fetch_size(void) { u32 smram_miscc; @@ -201,62 +208,79 @@ static void i8xx_destroy_pages(void *addr) atomic_dec(&agp_bridge->current_memory_agp); } +static int intel_i830_type_to_mask_type(struct agp_bridge_data *bridge, + int type) +{ + if (type < AGP_USER_TYPES) + return type; + else if (type == AGP_USER_CACHED_MEMORY) + return INTEL_AGP_CACHED_MEMORY; + else + return 0; +} + static int intel_i810_insert_entries(struct agp_memory *mem, off_t pg_start, int type) { int i, j, num_entries; void *temp; + int ret = -EINVAL; + int mask_type; if (mem->page_count == 0) - return 0; + goto out; temp = agp_bridge->current_size; num_entries = A_SIZE_FIX(temp)->num_entries; if ((pg_start + mem->page_count) > num_entries) - return -EINVAL; + goto out_err; - for (j = pg_start; j < (pg_start + mem->page_count); j++) { - if (!PGE_EMPTY(agp_bridge, readl(agp_bridge->gatt_table+j))) - return -EBUSY; - } - if (type != 0 || mem->type != 0) { - if ((type == AGP_DCACHE_MEMORY) && (mem->type == AGP_DCACHE_MEMORY)) { - /* special insert */ - if (!mem->is_flushed) { - global_cache_flush(); - mem->is_flushed = TRUE; - } - - for (i = pg_start; i < (pg_start + mem->page_count); i++) { - writel((i*4096)|I810_PTE_LOCAL|I810_PTE_VALID, intel_i810_private.registers+I810_PTE_BASE+(i*4)); - } - readl(intel_i810_private.registers+I810_PTE_BASE+((i-1)*4)); /* PCI Posting. */ - - agp_bridge->driver->tlb_flush(mem); - return 0; + for (j = pg_start; j < (pg_start + mem->page_count); j++) { + if (!PGE_EMPTY(agp_bridge, readl(agp_bridge->gatt_table+j))) { + ret = -EBUSY; + goto out_err; } - if ((type == AGP_PHYS_MEMORY) && (mem->type == AGP_PHYS_MEMORY)) - goto insert; - return -EINVAL; } -insert: - if (!mem->is_flushed) { - global_cache_flush(); - mem->is_flushed = TRUE; - } + if (type != mem->type) + goto out_err; - for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { - writel(agp_bridge->driver->mask_memory(agp_bridge, - mem->memory[i], mem->type), - intel_i810_private.registers+I810_PTE_BASE+(j*4)); + mask_type = agp_bridge->driver->agp_type_to_mask_type(agp_bridge, type); + + switch (mask_type) { + case AGP_DCACHE_MEMORY: + if (!mem->is_flushed) + global_cache_flush(); + for (i = pg_start; i < (pg_start + mem->page_count); i++) { + writel((i*4096)|I810_PTE_LOCAL|I810_PTE_VALID, + intel_i810_private.registers+I810_PTE_BASE+(i*4)); + } + readl(intel_i810_private.registers+I810_PTE_BASE+((i-1)*4)); + break; + case AGP_PHYS_MEMORY: + case AGP_NORMAL_MEMORY: + if (!mem->is_flushed) + global_cache_flush(); + for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { + writel(agp_bridge->driver->mask_memory(agp_bridge, + mem->memory[i], + mask_type), + intel_i810_private.registers+I810_PTE_BASE+(j*4)); + } + readl(intel_i810_private.registers+I810_PTE_BASE+((j-1)*4)); + break; + default: + goto out_err; } - readl(intel_i810_private.registers+I810_PTE_BASE+((j-1)*4)); /* PCI Posting. */ agp_bridge->driver->tlb_flush(mem); - return 0; +out: + ret = 0; +out_err: + mem->is_flushed = 1; + return ret; } static int intel_i810_remove_entries(struct agp_memory *mem, off_t pg_start, @@ -337,12 +361,11 @@ static struct agp_memory *intel_i810_alloc_by_type(size_t pg_count, int type) new->type = AGP_DCACHE_MEMORY; new->page_count = pg_count; new->num_scratch_pages = 0; - vfree(new->memory); + agp_free_page_array(new); return new; } if (type == AGP_PHYS_MEMORY) return alloc_agpphysmem_i8xx(pg_count, type); - return NULL; } @@ -357,7 +380,7 @@ static void intel_i810_free_by_type(struct agp_memory *curr) gart_to_virt(curr->memory[0])); global_flush_tlb(); } - vfree(curr->memory); + agp_free_page_array(curr); } kfree(curr); } @@ -619,9 +642,11 @@ static int intel_i830_insert_entries(struct agp_memory *mem,off_t pg_start, int { int i,j,num_entries; void *temp; + int ret = -EINVAL; + int mask_type; if (mem->page_count == 0) - return 0; + goto out; temp = agp_bridge->current_size; num_entries = A_SIZE_FIX(temp)->num_entries; @@ -631,34 +656,41 @@ static int intel_i830_insert_entries(struct agp_memory *mem,off_t pg_start, int pg_start,intel_i830_private.gtt_entries); printk (KERN_INFO PFX "Trying to insert into local/stolen memory\n"); - return -EINVAL; + goto out_err; } if ((pg_start + mem->page_count) > num_entries) - return -EINVAL; + goto out_err; /* The i830 can't check the GTT for entries since its read only, * depend on the caller to make the correct offset decisions. */ - if ((type != 0 && type != AGP_PHYS_MEMORY) || - (mem->type != 0 && mem->type != AGP_PHYS_MEMORY)) - return -EINVAL; + if (type != mem->type) + goto out_err; + + mask_type = agp_bridge->driver->agp_type_to_mask_type(agp_bridge, type); - if (!mem->is_flushed) { + if (mask_type != 0 && mask_type != AGP_PHYS_MEMORY && + mask_type != INTEL_AGP_CACHED_MEMORY) + goto out_err; + + if (!mem->is_flushed) global_cache_flush(); - mem->is_flushed = TRUE; - } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { writel(agp_bridge->driver->mask_memory(agp_bridge, - mem->memory[i], mem->type), - intel_i830_private.registers+I810_PTE_BASE+(j*4)); + mem->memory[i], mask_type), + intel_i830_private.registers+I810_PTE_BASE+(j*4)); } readl(intel_i830_private.registers+I810_PTE_BASE+((j-1)*4)); - agp_bridge->driver->tlb_flush(mem); - return 0; + +out: + ret = 0; +out_err: + mem->is_flushed = 1; + return ret; } static int intel_i830_remove_entries(struct agp_memory *mem,off_t pg_start, @@ -687,7 +719,6 @@ static struct agp_memory *intel_i830_alloc_by_type(size_t pg_count,int type) { if (type == AGP_PHYS_MEMORY) return alloc_agpphysmem_i8xx(pg_count, type); - /* always return NULL for other allocation types for now */ return NULL; } @@ -734,9 +765,11 @@ static int intel_i915_insert_entries(struct agp_memory *mem,off_t pg_start, { int i,j,num_entries; void *temp; + int ret = -EINVAL; + int mask_type; if (mem->page_count == 0) - return 0; + goto out; temp = agp_bridge->current_size; num_entries = A_SIZE_FIX(temp)->num_entries; @@ -746,33 +779,41 @@ static int intel_i915_insert_entries(struct agp_memory *mem,off_t pg_start, pg_start,intel_i830_private.gtt_entries); printk (KERN_INFO PFX "Trying to insert into local/stolen memory\n"); - return -EINVAL; + goto out_err; } if ((pg_start + mem->page_count) > num_entries) - return -EINVAL; + goto out_err; - /* The i830 can't check the GTT for entries since its read only, + /* The i915 can't check the GTT for entries since its read only, * depend on the caller to make the correct offset decisions. */ - if ((type != 0 && type != AGP_PHYS_MEMORY) || - (mem->type != 0 && mem->type != AGP_PHYS_MEMORY)) - return -EINVAL; + if (type != mem->type) + goto out_err; + + mask_type = agp_bridge->driver->agp_type_to_mask_type(agp_bridge, type); - if (!mem->is_flushed) { + if (mask_type != 0 && mask_type != AGP_PHYS_MEMORY && + mask_type != INTEL_AGP_CACHED_MEMORY) + goto out_err; + + if (!mem->is_flushed) global_cache_flush(); - mem->is_flushed = TRUE; - } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { writel(agp_bridge->driver->mask_memory(agp_bridge, - mem->memory[i], mem->type), intel_i830_private.gtt+j); + mem->memory[i], mask_type), intel_i830_private.gtt+j); } - readl(intel_i830_private.gtt+j-1); + readl(intel_i830_private.gtt+j-1); agp_bridge->driver->tlb_flush(mem); - return 0; + + out: + ret = 0; + out_err: + mem->is_flushed = 1; + return ret; } static int intel_i915_remove_entries(struct agp_memory *mem,off_t pg_start, @@ -1384,6 +1425,7 @@ static struct agp_bridge_driver intel_generic_driver = { .free_by_type = agp_generic_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, }; static struct agp_bridge_driver intel_810_driver = { @@ -1408,6 +1450,7 @@ static struct agp_bridge_driver intel_810_driver = { .free_by_type = intel_i810_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, }; static struct agp_bridge_driver intel_815_driver = { @@ -1431,6 +1474,7 @@ static struct agp_bridge_driver intel_815_driver = { .free_by_type = agp_generic_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, }; static struct agp_bridge_driver intel_830_driver = { @@ -1455,6 +1499,7 @@ static struct agp_bridge_driver intel_830_driver = { .free_by_type = intel_i810_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = intel_i830_type_to_mask_type, }; static struct agp_bridge_driver intel_820_driver = { @@ -1478,6 +1523,7 @@ static struct agp_bridge_driver intel_820_driver = { .free_by_type = agp_generic_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, }; static struct agp_bridge_driver intel_830mp_driver = { @@ -1501,6 +1547,7 @@ static struct agp_bridge_driver intel_830mp_driver = { .free_by_type = agp_generic_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, }; static struct agp_bridge_driver intel_840_driver = { @@ -1524,6 +1571,7 @@ static struct agp_bridge_driver intel_840_driver = { .free_by_type = agp_generic_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, }; static struct agp_bridge_driver intel_845_driver = { @@ -1547,6 +1595,7 @@ static struct agp_bridge_driver intel_845_driver = { .free_by_type = agp_generic_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, }; static struct agp_bridge_driver intel_850_driver = { @@ -1570,6 +1619,7 @@ static struct agp_bridge_driver intel_850_driver = { .free_by_type = agp_generic_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, }; static struct agp_bridge_driver intel_860_driver = { @@ -1593,6 +1643,7 @@ static struct agp_bridge_driver intel_860_driver = { .free_by_type = agp_generic_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, }; static struct agp_bridge_driver intel_915_driver = { @@ -1617,6 +1668,7 @@ static struct agp_bridge_driver intel_915_driver = { .free_by_type = intel_i810_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = intel_i830_type_to_mask_type, }; static struct agp_bridge_driver intel_i965_driver = { @@ -1641,6 +1693,7 @@ static struct agp_bridge_driver intel_i965_driver = { .free_by_type = intel_i810_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = intel_i830_type_to_mask_type, }; static struct agp_bridge_driver intel_7505_driver = { @@ -1664,6 +1717,7 @@ static struct agp_bridge_driver intel_7505_driver = { .free_by_type = agp_generic_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, }; static int find_i810(u16 device) diff --git a/drivers/char/agp/nvidia-agp.c b/drivers/char/agp/nvidia-agp.c index df7f37b..2563286 100644 --- a/drivers/char/agp/nvidia-agp.c +++ b/drivers/char/agp/nvidia-agp.c @@ -310,6 +310,7 @@ static struct agp_bridge_driver nvidia_driver = { .free_by_type = agp_generic_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, }; static int __devinit agp_nvidia_probe(struct pci_dev *pdev, diff --git a/drivers/char/agp/sgi-agp.c b/drivers/char/agp/sgi-agp.c index 902648d..92d1dc4 100644 --- a/drivers/char/agp/sgi-agp.c +++ b/drivers/char/agp/sgi-agp.c @@ -265,6 +265,7 @@ struct agp_bridge_driver sgi_tioca_driver = { .free_by_type = agp_generic_free_by_type, .agp_alloc_page = sgi_tioca_alloc_page, .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, .cant_use_aperture = 1, .needs_scratch_page = 0, .num_aperture_sizes = 1, diff --git a/drivers/char/agp/sworks-agp.c b/drivers/char/agp/sworks-agp.c index 4f2d7d9..9f5ae77 100644 --- a/drivers/char/agp/sworks-agp.c +++ b/drivers/char/agp/sworks-agp.c @@ -444,6 +444,7 @@ static struct agp_bridge_driver sworks_driver = { .free_by_type = agp_generic_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, }; static int __devinit agp_serverworks_probe(struct pci_dev *pdev, diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c index dffc193..6c45702 100644 --- a/drivers/char/agp/uninorth-agp.c +++ b/drivers/char/agp/uninorth-agp.c @@ -510,6 +510,7 @@ struct agp_bridge_driver uninorth_agp_driver = { .free_by_type = agp_generic_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, .cant_use_aperture = 1, }; @@ -534,6 +535,7 @@ struct agp_bridge_driver u3_agp_driver = { .free_by_type = agp_generic_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, .cant_use_aperture = 1, .needs_scratch_page = 1, }; diff --git a/drivers/char/agp/via-agp.c b/drivers/char/agp/via-agp.c index 2ded7a28..2e7c043 100644 --- a/drivers/char/agp/via-agp.c +++ b/drivers/char/agp/via-agp.c @@ -191,6 +191,7 @@ static struct agp_bridge_driver via_agp3_driver = { .free_by_type = agp_generic_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, }; static struct agp_bridge_driver via_driver = { @@ -214,6 +215,7 @@ static struct agp_bridge_driver via_driver = { .free_by_type = agp_generic_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, }; static struct agp_device_ids via_agp_device_ids[] __devinitdata = diff --git a/include/linux/agp_backend.h b/include/linux/agp_backend.h index a5c8bb5..abc521c 100644 --- a/include/linux/agp_backend.h +++ b/include/linux/agp_backend.h @@ -87,10 +87,15 @@ struct agp_memory { u32 physical; u8 is_bound; u8 is_flushed; + u8 vmalloc_flag; }; #define AGP_NORMAL_MEMORY 0 +#define AGP_USER_TYPES (1 << 16) +#define AGP_USER_MEMORY (AGP_USER_TYPES) +#define AGP_USER_CACHED_MEMORY (AGP_USER_TYPES + 1) + extern struct agp_bridge_data *agp_bridge; extern struct list_head agp_bridges; -- cgit v0.10.2 From 14796722839ee50ed2a2c7a6a135e7d0888aaada Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=B3=20Bilski?= Date: Fri, 19 Jan 2007 22:28:22 +0100 Subject: [CPUFREQ] Longhaul - Remove "ignore_latency" option MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There is no need to have this option in Longhaul anymore. It was for laptop with CLE266 chipset in times, when only ACPI C3 was used to switch frequency. Now we have native support not only for CLE266, but CN400 too. Would be good to have support for PN266, but I can't find datasheet for it. Looks like BIOS for CPU's faster then 1GHz don't support ACPI C2 nor C3. Signed-off-by: Rafa³ Bilski Signed-off-by: Dave Jones diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index e940e00..b679aaf 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -76,7 +76,6 @@ static u8 longhaul_flags; /* Module parameters */ static int scale_voltage; -static int ignore_latency; #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg) @@ -680,8 +679,7 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) /* Check ACPI support for C3 state */ if ((pr != NULL) && (longhaul_version == TYPE_POWERSAVER)) { cx = &pr->power.states[ACPI_STATE_C3]; - if (cx->address > 0 && - (cx->latency <= 1000 || ignore_latency != 0) ) { + if (cx->address > 0 && cx->latency <= 1000) { longhaul_flags |= USE_ACPI_C3; goto print_support_type; } @@ -800,8 +798,6 @@ static void __exit longhaul_exit(void) module_param (scale_voltage, int, 0644); MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor"); -module_param(ignore_latency, int, 0644); -MODULE_PARM_DESC(ignore_latency, "Skip ACPI C3 latency test"); MODULE_AUTHOR ("Dave Jones "); MODULE_DESCRIPTION ("Longhaul driver for VIA Cyrix processors."); -- cgit v0.10.2 From 58389a86df48ff927846df9537ea34d9961b5c44 Mon Sep 17 00:00:00 2001 From: Joachim Deguara Date: Tue, 30 Jan 2007 16:53:54 +0100 Subject: [CPUFREQ] fix cpuinfo_cur_freq for CPU_HW_PSTATE This fixes the cpuinfo_cur_freq value by using the correct find_khz_freq_from_fiddid() when the CPU uses hardware p-states. Signed-off-by: Joachim Deguara Acked-by: Mark Langsdorf Signed-off-by: Dave Jones diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c index 2d64916..fe3b670 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c @@ -1289,7 +1289,11 @@ static unsigned int powernowk8_get (unsigned int cpu) if (query_current_values_with_pending_wait(data)) goto out; - khz = find_khz_freq_from_fid(data->currfid); + if (cpu_family == CPU_HW_PSTATE) + khz = find_khz_freq_from_fiddid(data->currfid, data->currdid); + else + khz = find_khz_freq_from_fid(data->currfid); + out: set_cpus_allowed(current, oldmask); -- cgit v0.10.2 From 980342a7eb6b4ebcc5feffe6287ad5cda5a68a4b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=B3=20Bilski?= Date: Wed, 31 Jan 2007 23:42:47 +0100 Subject: [CPUFREQ] Longhaul - Introduce Nehemiah C MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Looks like some time ago I introduced a bug to Longhaul. I had report that 9x133Mhz CPU is seen as 5x133MHz. So I changed multipliers table. That was a mistake. According to documentation table was correct. So only way to avoid 5 or 9 dilema is not use MaxMHzBR for PowerSaver 1.0. One code that works on all processors. To do it I need also separate flag for Nehemiah C (min = x4.0) and Nehemiah (min = x5.0). Signed-off-by: Rafa³ Bilski Signed-off-by: Dave Jones diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index b679aaf..849a6df 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -51,6 +51,7 @@ #define CPU_EZRA 3 #define CPU_EZRA_T 4 #define CPU_NEHEMIAH 5 +#define CPU_NEHEMIAH_C 6 /* Flags */ #define USE_ACPI_C3 (1 << 1) @@ -349,67 +350,47 @@ static int guess_fsb(int mult) static int __init longhaul_get_ranges(void) { - unsigned long invalue; - unsigned int ezra_t_multipliers[32]= { - 90, 30, 40, 100, 55, 35, 45, 95, - 50, 70, 80, 60, 120, 75, 85, 65, - -1, 110, 120, -1, 135, 115, 125, 105, - 130, 150, 160, 140, -1, 155, -1, 145 }; unsigned int j, k = 0; - union msr_longhaul longhaul; - int mult = 0; + int mult; + /* Get current frequency */ + mult = longhaul_get_cpu_mult(); + if (mult == -1) { + printk(KERN_INFO PFX "Invalid (reserved) multiplier!\n"); + return -EINVAL; + } + fsb = guess_fsb(mult); + if (fsb == 0) { + printk(KERN_INFO PFX "Invalid (reserved) FSB!\n"); + return -EINVAL; + } + /* Get max multiplier - as we always did. + * Longhaul MSR is usefull only when voltage scaling is enabled. + * C3 is booting at max anyway. */ + maxmult = mult; + /* Get min multiplier */ switch (longhaul_version) { case TYPE_LONGHAUL_V1: case TYPE_LONGHAUL_V2: - /* Ugh, Longhaul v1 didn't have the min/max MSRs. - Assume min=3.0x & max = whatever we booted at. */ minmult = 30; - maxmult = mult = longhaul_get_cpu_mult(); break; case TYPE_POWERSAVER: /* Ezra-T */ - if (cpu_model==CPU_EZRA_T) { + if (cpu_model == CPU_EZRA_T) minmult = 30; - rdmsrl (MSR_VIA_LONGHAUL, longhaul.val); - invalue = longhaul.bits.MaxMHzBR; - if (longhaul.bits.MaxMHzBR4) - invalue += 16; - maxmult = mult = ezra_t_multipliers[invalue]; - break; - } - /* Nehemiah */ - if (cpu_model==CPU_NEHEMIAH) { - rdmsrl (MSR_VIA_LONGHAUL, longhaul.val); - - /* - * TODO: This code works, but raises a lot of questions. - * - Some Nehemiah's seem to have broken Min/MaxMHzBR's. - * We get around this by using a hardcoded multiplier of 4.0x - * for the minimimum speed, and the speed we booted up at for the max. - * This is done in longhaul_get_cpu_mult() by reading the EBLCR register. - * - According to some VIA documentation EBLCR is only - * in pre-Nehemiah C3s. How this still works is a mystery. - * We're possibly using something undocumented and unsupported, - * But it works, so we don't grumble. - */ - minmult=40; - maxmult = mult = longhaul_get_cpu_mult(); - break; - } + else if (cpu_model == CPU_NEHEMIAH) + minmult = 50; + /* Nehemiah C */ + else if (cpu_model == CPU_NEHEMIAH_C) + minmult = 40; + break; } - fsb = guess_fsb(mult); dprintk ("MinMult:%d.%dx MaxMult:%d.%dx\n", minmult/10, minmult%10, maxmult/10, maxmult%10); - if (fsb == 0) { - printk (KERN_INFO PFX "Invalid (reserved) FSB!\n"); - return -EINVAL; - } - highest_speed = calc_speed(maxmult); lowest_speed = calc_speed(minmult); dprintk ("FSB:%dMHz Lowest speed: %s Highest speed:%s\n", fsb, @@ -634,21 +615,23 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) break; case 9: - cpu_model = CPU_NEHEMIAH; longhaul_version = TYPE_POWERSAVER; numscales=32; switch (c->x86_mask) { case 0 ... 1: + cpu_model = CPU_NEHEMIAH; cpuname = "C3 'Nehemiah A' [C5N]"; memcpy (clock_ratio, nehemiah_a_clock_ratio, sizeof(nehemiah_a_clock_ratio)); memcpy (eblcr_table, nehemiah_a_eblcr, sizeof(nehemiah_a_eblcr)); break; case 2 ... 4: + cpu_model = CPU_NEHEMIAH; cpuname = "C3 'Nehemiah B' [C5N]"; memcpy (clock_ratio, nehemiah_b_clock_ratio, sizeof(nehemiah_b_clock_ratio)); memcpy (eblcr_table, nehemiah_b_eblcr, sizeof(nehemiah_b_eblcr)); break; case 5 ... 15: + cpu_model = CPU_NEHEMIAH_C; cpuname = "C3 'Nehemiah C' [C5N]"; memcpy (clock_ratio, nehemiah_c_clock_ratio, sizeof(nehemiah_c_clock_ratio)); memcpy (eblcr_table, nehemiah_c_eblcr, sizeof(nehemiah_c_eblcr)); -- cgit v0.10.2 From 0d44b2ba287ea98547097ad2b8b0cc5f0589b8d2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=B3=20Bilski?= Date: Wed, 31 Jan 2007 23:50:49 +0100 Subject: [CPUFREQ] Longhaul - Remove duplicate tables MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Now there is no need to depend on -1 in Nehemiah tables. After previous change code is eliminating multipliers lower then 5.0 by minmult for Nehemiah A and B. Signed-off-by: Rafa³ Bilski Signed-off-by: Dave Jones diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index 849a6df..8ea34e9 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -616,25 +616,23 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) case 9: longhaul_version = TYPE_POWERSAVER; - numscales=32; + numscales = 32; + memcpy(clock_ratio, + nehemiah_clock_ratio, + sizeof(nehemiah_clock_ratio)); + memcpy(eblcr_table, nehemiah_eblcr, sizeof(nehemiah_eblcr)); switch (c->x86_mask) { case 0 ... 1: cpu_model = CPU_NEHEMIAH; cpuname = "C3 'Nehemiah A' [C5N]"; - memcpy (clock_ratio, nehemiah_a_clock_ratio, sizeof(nehemiah_a_clock_ratio)); - memcpy (eblcr_table, nehemiah_a_eblcr, sizeof(nehemiah_a_eblcr)); break; case 2 ... 4: cpu_model = CPU_NEHEMIAH; cpuname = "C3 'Nehemiah B' [C5N]"; - memcpy (clock_ratio, nehemiah_b_clock_ratio, sizeof(nehemiah_b_clock_ratio)); - memcpy (eblcr_table, nehemiah_b_eblcr, sizeof(nehemiah_b_eblcr)); break; case 5 ... 15: cpu_model = CPU_NEHEMIAH_C; cpuname = "C3 'Nehemiah C' [C5N]"; - memcpy (clock_ratio, nehemiah_c_clock_ratio, sizeof(nehemiah_c_clock_ratio)); - memcpy (eblcr_table, nehemiah_c_eblcr, sizeof(nehemiah_c_eblcr)); break; } break; diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.h b/arch/i386/kernel/cpu/cpufreq/longhaul.h index bc4682a..bb0a04b 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.h +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.h @@ -235,84 +235,14 @@ static int __initdata ezrat_eblcr[32] = { /* * VIA C3 Nehemiah */ -static int __initdata nehemiah_a_clock_ratio[32] = { +static int __initdata nehemiah_clock_ratio[32] = { 100, /* 0000 -> 10.0x */ 160, /* 0001 -> 16.0x */ - -1, /* 0010 -> RESERVED */ - 90, /* 0011 -> 9.0x */ - 95, /* 0100 -> 9.5x */ - -1, /* 0101 -> RESERVED */ - -1, /* 0110 -> RESERVED */ - 55, /* 0111 -> 5.5x */ - 60, /* 1000 -> 6.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 50, /* 1011 -> 5.0x */ - 65, /* 1100 -> 6.5x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 120, /* 1111 -> 12.0x */ - 100, /* 0000 -> 10.0x */ - -1, /* 0001 -> RESERVED */ - 120, /* 0010 -> 12.0x */ - 90, /* 0011 -> 9.0x */ - 105, /* 0100 -> 10.5x */ - 115, /* 0101 -> 11.5x */ - 125, /* 0110 -> 12.5x */ - 135, /* 0111 -> 13.5x */ - 140, /* 1000 -> 14.0x */ - 150, /* 1001 -> 15.0x */ - 160, /* 1010 -> 16.0x */ - 130, /* 1011 -> 13.0x */ - 145, /* 1100 -> 14.5x */ - 155, /* 1101 -> 15.5x */ - -1, /* 1110 -> RESERVED (13.0x) */ - 120, /* 1111 -> 12.0x */ -}; - -static int __initdata nehemiah_b_clock_ratio[32] = { - 100, /* 0000 -> 10.0x */ - 160, /* 0001 -> 16.0x */ - -1, /* 0010 -> RESERVED */ - 90, /* 0011 -> 9.0x */ - 95, /* 0100 -> 9.5x */ - -1, /* 0101 -> RESERVED */ - -1, /* 0110 -> RESERVED */ - 55, /* 0111 -> 5.5x */ - 60, /* 1000 -> 6.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 50, /* 1011 -> 5.0x */ - 65, /* 1100 -> 6.5x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 120, /* 1111 -> 12.0x */ - 100, /* 0000 -> 10.0x */ - 110, /* 0001 -> 11.0x */ - 120, /* 0010 -> 12.0x */ - 90, /* 0011 -> 9.0x */ - 105, /* 0100 -> 10.5x */ - 115, /* 0101 -> 11.5x */ - 125, /* 0110 -> 12.5x */ - 135, /* 0111 -> 13.5x */ - 140, /* 1000 -> 14.0x */ - 150, /* 1001 -> 15.0x */ - 160, /* 1010 -> 16.0x */ - 130, /* 1011 -> 13.0x */ - 145, /* 1100 -> 14.5x */ - 155, /* 1101 -> 15.5x */ - -1, /* 1110 -> RESERVED (13.0x) */ - 120, /* 1111 -> 12.0x */ -}; - -static int __initdata nehemiah_c_clock_ratio[32] = { - 100, /* 0000 -> 10.0x */ - 160, /* 0001 -> 16.0x */ - 40, /* 0010 -> RESERVED */ + 40, /* 0010 -> 4.0x */ 90, /* 0011 -> 9.0x */ 95, /* 0100 -> 9.5x */ -1, /* 0101 -> RESERVED */ - 45, /* 0110 -> RESERVED */ + 45, /* 0110 -> 4.5x */ 55, /* 0111 -> 5.5x */ 60, /* 1000 -> 6.0x */ 70, /* 1001 -> 7.0x */ @@ -340,84 +270,14 @@ static int __initdata nehemiah_c_clock_ratio[32] = { 120, /* 1111 -> 12.0x */ }; -static int __initdata nehemiah_a_eblcr[32] = { - 50, /* 0000 -> 5.0x */ - 160, /* 0001 -> 16.0x */ - -1, /* 0010 -> RESERVED */ - 100, /* 0011 -> 10.0x */ - 55, /* 0100 -> 5.5x */ - -1, /* 0101 -> RESERVED */ - -1, /* 0110 -> RESERVED */ - 95, /* 0111 -> 9.5x */ - 90, /* 1000 -> 9.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 60, /* 1011 -> 6.0x */ - 120, /* 1100 -> 12.0x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 65, /* 1111 -> 6.5x */ - 90, /* 0000 -> 9.0x */ - -1, /* 0001 -> RESERVED */ - 120, /* 0010 -> 12.0x */ - 100, /* 0011 -> 10.0x */ - 135, /* 0100 -> 13.5x */ - 115, /* 0101 -> 11.5x */ - 125, /* 0110 -> 12.5x */ - 105, /* 0111 -> 10.5x */ - 130, /* 1000 -> 13.0x */ - 150, /* 1001 -> 15.0x */ - 160, /* 1010 -> 16.0x */ - 140, /* 1011 -> 14.0x */ - 120, /* 1100 -> 12.0x */ - 155, /* 1101 -> 15.5x */ - -1, /* 1110 -> RESERVED (13.0x) */ - 145 /* 1111 -> 14.5x */ - /* end of table */ -}; -static int __initdata nehemiah_b_eblcr[32] = { - 50, /* 0000 -> 5.0x */ - 160, /* 0001 -> 16.0x */ - -1, /* 0010 -> RESERVED */ - 100, /* 0011 -> 10.0x */ - 55, /* 0100 -> 5.5x */ - -1, /* 0101 -> RESERVED */ - -1, /* 0110 -> RESERVED */ - 95, /* 0111 -> 9.5x */ - 90, /* 1000 -> 9.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 60, /* 1011 -> 6.0x */ - 120, /* 1100 -> 12.0x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 65, /* 1111 -> 6.5x */ - 90, /* 0000 -> 9.0x */ - 110, /* 0001 -> 11.0x */ - 120, /* 0010 -> 12.0x */ - 100, /* 0011 -> 10.0x */ - 135, /* 0100 -> 13.5x */ - 115, /* 0101 -> 11.5x */ - 125, /* 0110 -> 12.5x */ - 105, /* 0111 -> 10.5x */ - 130, /* 1000 -> 13.0x */ - 150, /* 1001 -> 15.0x */ - 160, /* 1010 -> 16.0x */ - 140, /* 1011 -> 14.0x */ - 120, /* 1100 -> 12.0x */ - 155, /* 1101 -> 15.5x */ - -1, /* 1110 -> RESERVED (13.0x) */ - 145 /* 1111 -> 14.5x */ - /* end of table */ -}; -static int __initdata nehemiah_c_eblcr[32] = { +static int __initdata nehemiah_eblcr[32] = { 50, /* 0000 -> 5.0x */ 160, /* 0001 -> 16.0x */ - 40, /* 0010 -> RESERVED */ + 40, /* 0010 -> 4.0x */ 100, /* 0011 -> 10.0x */ 55, /* 0100 -> 5.5x */ -1, /* 0101 -> RESERVED */ - 45, /* 0110 -> RESERVED */ + 45, /* 0110 -> 4.5x */ 95, /* 0111 -> 9.5x */ 90, /* 1000 -> 9.0x */ 70, /* 1001 -> 7.0x */ @@ -443,7 +303,6 @@ static int __initdata nehemiah_c_eblcr[32] = { 155, /* 1101 -> 15.5x */ -1, /* 1110 -> RESERVED (13.0x) */ 145 /* 1111 -> 14.5x */ - /* end of table */ }; /* -- cgit v0.10.2 From a995e9eb3258df6ab2e9f958e08003978e50d568 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 2 Feb 2007 15:37:43 -0800 Subject: NLM: Fix double free in __nlm_async_call rpc_call_async() will always call rpc_release_calldata(), so it is an error for __nlm_async_call() to do so as well. Signed-off-by: Trond Myklebust diff --git a/fs/lockd/clntproc.c b/fs/lockd/clntproc.c index 0b4acc1..a5c019e 100644 --- a/fs/lockd/clntproc.c +++ b/fs/lockd/clntproc.c @@ -361,7 +361,6 @@ static int __nlm_async_call(struct nlm_rqst *req, u32 proc, struct rpc_message * { struct nlm_host *host = req->a_host; struct rpc_clnt *clnt; - int status = -ENOLCK; dprintk("lockd: call procedure %d on %s (async)\n", (int)proc, host->h_name); @@ -373,12 +372,10 @@ static int __nlm_async_call(struct nlm_rqst *req, u32 proc, struct rpc_message * msg->rpc_proc = &clnt->cl_procinfo[proc]; /* bootstrap and kick off the async RPC call */ - status = rpc_call_async(clnt, msg, RPC_TASK_ASYNC, tk_ops, req); - if (status == 0) - return 0; + return rpc_call_async(clnt, msg, RPC_TASK_ASYNC, tk_ops, req); out_err: - nlm_release_call(req); - return status; + tk_ops->rpc_release(req); + return -ENOLCK; } int nlm_async_call(struct nlm_rqst *req, u32 proc, const struct rpc_call_ops *tk_ops) diff --git a/fs/lockd/svclock.c b/fs/lockd/svclock.c index c7db0a5..cf51f84 100644 --- a/fs/lockd/svclock.c +++ b/fs/lockd/svclock.c @@ -593,9 +593,7 @@ callback: /* Call the client */ kref_get(&block->b_count); - if (nlm_async_call(block->b_call, NLMPROC_GRANTED_MSG, - &nlmsvc_grant_ops) < 0) - nlmsvc_release_block(block); + nlm_async_call(block->b_call, NLMPROC_GRANTED_MSG, &nlmsvc_grant_ops); } /* -- cgit v0.10.2 From 54cc533aaa0dc331ad126f0aacfb19572adee638 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sat, 3 Feb 2007 13:38:40 -0800 Subject: RPC: Fix double free in portmapper code rpc_run_task is guaranteed to always call ->rpc_release. Signed-off-by: Trond Myklebust diff --git a/net/sunrpc/pmap_clnt.c b/net/sunrpc/pmap_clnt.c index 3946ec3..76e59e9 100644 --- a/net/sunrpc/pmap_clnt.c +++ b/net/sunrpc/pmap_clnt.c @@ -62,7 +62,10 @@ static inline void pmap_map_free(struct portmap_args *map) static void pmap_map_release(void *data) { - pmap_map_free(data); + struct portmap_args *map = data; + + xprt_put(map->pm_xprt); + pmap_map_free(map); } static const struct rpc_call_ops pmap_getport_ops = { @@ -133,7 +136,7 @@ void rpc_getport(struct rpc_task *task) status = -EIO; child = rpc_run_task(pmap_clnt, RPC_TASK_ASYNC, &pmap_getport_ops, map); if (IS_ERR(child)) - goto bailout; + goto bailout_nofree; rpc_put_task(child); task->tk_xprt->stat.bind_count++; @@ -222,7 +225,6 @@ static void pmap_getport_done(struct rpc_task *child, void *data) child->tk_pid, status, map->pm_port); pmap_wake_portmap_waiters(xprt, status); - xprt_put(xprt); } /** -- cgit v0.10.2 From 2efef837fb84f78cee7439804cb3722bffc64e75 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sat, 3 Feb 2007 13:38:41 -0800 Subject: RPC: Clean up rpc_execute... The error values are already propagated through task->tk_status, and none of the callers check one without checking the other, so we can drop the return value. Signed-off-by: Trond Myklebust diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h index 8b6ce60..de9fc576 100644 --- a/include/linux/sunrpc/sched.h +++ b/include/linux/sunrpc/sched.h @@ -253,7 +253,7 @@ void rpc_put_task(struct rpc_task *); void rpc_exit_task(struct rpc_task *); void rpc_release_calldata(const struct rpc_call_ops *, void *); void rpc_killall_tasks(struct rpc_clnt *); -int rpc_execute(struct rpc_task *); +void rpc_execute(struct rpc_task *); void rpc_init_priority_wait_queue(struct rpc_wait_queue *, const char *); void rpc_init_wait_queue(struct rpc_wait_queue *, const char *); void rpc_sleep_on(struct rpc_wait_queue *, struct rpc_task *, diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 16c9fbc..e9d5f3c 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -486,17 +486,13 @@ int rpc_call_sync(struct rpc_clnt *clnt, struct rpc_message *msg, int flags) /* Mask signals on RPC calls _and_ GSS_AUTH upcalls */ rpc_task_sigmask(task, &oldset); - rpc_call_setup(task, msg, 0); - /* Set up the call info struct and execute the task */ + rpc_call_setup(task, msg, 0); + if (task->tk_status == 0) { + atomic_inc(&task->tk_count); + rpc_execute(task); + } status = task->tk_status; - if (status != 0) - goto out; - atomic_inc(&task->tk_count); - status = rpc_execute(task); - if (status == 0) - status = task->tk_status; -out: rpc_put_task(task); rpc_restore_sigmask(&oldset); return status; diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c index fc083f0..13ab0c6 100644 --- a/net/sunrpc/sched.c +++ b/net/sunrpc/sched.c @@ -625,7 +625,7 @@ void rpc_release_calldata(const struct rpc_call_ops *ops, void *calldata) /* * This is the RPC `scheduler' (or rather, the finite state machine). */ -static int __rpc_execute(struct rpc_task *task) +static void __rpc_execute(struct rpc_task *task) { int status = 0; @@ -679,9 +679,9 @@ static int __rpc_execute(struct rpc_task *task) if (RPC_IS_ASYNC(task)) { /* Careful! we may have raced... */ if (RPC_IS_QUEUED(task)) - return 0; + return; if (rpc_test_and_set_running(task)) - return 0; + return; continue; } @@ -710,7 +710,6 @@ static int __rpc_execute(struct rpc_task *task) dprintk("RPC: %4d, return %d, status %d\n", task->tk_pid, status, task->tk_status); /* Release all resources associated with the task */ rpc_release_task(task); - return status; } /* @@ -722,12 +721,11 @@ static int __rpc_execute(struct rpc_task *task) * released. In particular note that tk_release() will have * been called, so your task memory may have been freed. */ -int -rpc_execute(struct rpc_task *task) +void rpc_execute(struct rpc_task *task) { rpc_set_active(task); rpc_set_running(task); - return __rpc_execute(task); + __rpc_execute(task); } static void rpc_async_schedule(struct work_struct *work) -- cgit v0.10.2 From f2d0d85e58099d518cb50b1c95fc1fc62bbce1b8 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 2 Feb 2007 14:46:09 -0800 Subject: NFSv4: Fix Oops in nfs4_create_referral_server The filehandle that is passed into nfs4_create_referral_server is not initialised. The expectation is that nfs4_create_referral_server will initialise it, and return it to the caller. Signed-off-by: Trond Myklebust diff --git a/fs/nfs/client.c b/fs/nfs/client.c index 23ab145..a3191f0 100644 --- a/fs/nfs/client.c +++ b/fs/nfs/client.c @@ -1030,7 +1030,7 @@ error: * Create an NFS4 referral server record */ struct nfs_server *nfs4_create_referral_server(struct nfs_clone_mount *data, - struct nfs_fh *fh) + struct nfs_fh *mntfh) { struct nfs_client *parent_client; struct nfs_server *server, *parent_server; @@ -1069,8 +1069,13 @@ struct nfs_server *nfs4_create_referral_server(struct nfs_clone_mount *data, BUG_ON(!server->nfs_client->rpc_ops); BUG_ON(!server->nfs_client->rpc_ops->file_inode_ops); + /* Probe the root fh to retrieve its FSID and filehandle */ + error = nfs4_path_walk(server, mntfh, data->mnt_path); + if (error < 0) + goto error; + /* probe the filesystem info for this server filesystem */ - error = nfs_probe_fsinfo(server, fh, &fattr); + error = nfs_probe_fsinfo(server, mntfh, &fattr); if (error < 0) goto error; diff --git a/fs/nfs/super.c b/fs/nfs/super.c index 28108c8..89da0a3 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -1044,7 +1044,7 @@ static int nfs4_referral_get_sb(struct file_system_type *fs_type, int flags, nfs4_fill_super(s); } - mntroot = nfs4_get_root(s, data->fh); + mntroot = nfs4_get_root(s, &mntfh); if (IS_ERR(mntroot)) { error = PTR_ERR(mntroot); goto error_splat_super; -- cgit v0.10.2 From ab91f264cfbafd079dcb1bd02e9803c2dd65de19 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 2 Feb 2007 14:47:17 -0800 Subject: NFSv4: Fix NFS4_enc_server_caps_sz/NFS4_dec_server_caps_sz Insert missing encode_putfh_maxsz/decode_putfh_maxsz Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index 0cf3fa3..f02d522 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -387,8 +387,10 @@ static int nfs4_stat_to_errno(int); decode_putfh_maxsz + \ op_decode_hdr_maxsz + 12) #define NFS4_enc_server_caps_sz (compound_encode_hdr_maxsz + \ + encode_putfh_maxsz + \ encode_getattr_maxsz) #define NFS4_dec_server_caps_sz (compound_decode_hdr_maxsz + \ + decode_putfh_maxsz + \ decode_getattr_maxsz) #define NFS4_enc_delegreturn_sz (compound_encode_hdr_maxsz + \ encode_putfh_maxsz + \ -- cgit v0.10.2 From ccfeb506231348a3c60ab0fdb5753a574653e3c0 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sat, 13 Jan 2007 02:28:12 -0500 Subject: NFS: Fix up "rm -rf"... When a file is being scheduled for deletion by means of the sillyrename mechanism, it makes sense to start out writeback of the dirty data as soon as possible in order to ensure that the delete can occur. Examples of cases where this is an issue include "rm -rf", which will busy-wait until the file is closed, and the sillyrename completes. Signed-off-by: Trond Myklebust diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index d9ba8cb..bd269d2 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1443,6 +1443,8 @@ static int nfs_unlink(struct inode *dir, struct dentry *dentry) if (atomic_read(&dentry->d_count) > 1) { spin_unlock(&dentry->d_lock); spin_unlock(&dcache_lock); + /* Start asynchronous writeout of the inode */ + write_inode_now(dentry->d_inode, 0); error = nfs_sillyrename(dir, dentry); unlock_kernel(); return error; -- cgit v0.10.2 From df1d5d23d3a1a713c69b0f9ec67c59aeca3ce6b3 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 15 Jan 2007 13:56:29 -0500 Subject: NFS: Fix a readdir/lookup inefficiency. Make sure that nfs_readdir_lookup() handles negative dentries correctly. If d_lookup() returns a negative dentry, then we need to d_drop() that since readdir shows that it should be positive. Signed-off-by: Trond Myklebust diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index bd269d2..db29c7f 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1123,8 +1123,14 @@ static struct dentry *nfs_readdir_lookup(nfs_readdir_descriptor_t *desc) } name.hash = full_name_hash(name.name, name.len); dentry = d_lookup(parent, &name); - if (dentry != NULL) - return dentry; + if (dentry != NULL) { + /* Is this a positive dentry? */ + if (dentry->d_inode != NULL) + return dentry; + /* No, so d_drop to allow one to be created */ + d_drop(dentry); + dput(dentry); + } if (!desc->plus || !(entry->fattr->valid & NFS_ATTR_FATTR)) return NULL; /* Note: caller is already holding the dir->i_mutex! */ -- cgit v0.10.2 From ef75c7974b383769ae5741cf930b8aa4dcaef395 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 16 Jan 2007 10:09:44 -0500 Subject: NFS: Also use readdir info to revalidate positive dentries If the fileid of the cached dentry fails to match that returned by the readdir call, then we should also d_drop. Try to take into account the fact that on NFSv4, readdir may return the "mounted_on_fileid" by looking for submounts. Signed-off-by: Trond Myklebust diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index db29c7f..062e108 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1124,9 +1124,16 @@ static struct dentry *nfs_readdir_lookup(nfs_readdir_descriptor_t *desc) name.hash = full_name_hash(name.name, name.len); dentry = d_lookup(parent, &name); if (dentry != NULL) { - /* Is this a positive dentry? */ - if (dentry->d_inode != NULL) - return dentry; + /* Is this a positive dentry that matches the readdir info? */ + if (dentry->d_inode != NULL && + (NFS_FILEID(dentry->d_inode) == entry->ino || + d_mountpoint(dentry))) { + if (!desc->plus || entry->fh->size == 0) + return dentry; + if (nfs_compare_fh(NFS_FH(dentry->d_inode), + entry->fh) == 0) + goto out_renew; + } /* No, so d_drop to allow one to be created */ d_drop(dentry); dput(dentry); @@ -1152,6 +1159,7 @@ static struct dentry *nfs_readdir_lookup(nfs_readdir_descriptor_t *desc) dentry = alias; } +out_renew: nfs_renew_times(dentry); nfs_set_verifier(dentry, nfs_save_change_attribute(dir)); return dentry; -- cgit v0.10.2 From c79ba787c11e767ffaf8d723923afda99ba6c63c Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 31 Jan 2007 08:16:24 -0500 Subject: NFS: Dont clobber more uptodate values in nfs_set_verifier() nfs_lookup_revalidate and friends are not serialised, so it is currently quite possible for the dentry to be revalidated, and then have the updated verifier replaced with an older value by another process. Signed-off-by: Trond Myklebust diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index 062e108..37c1dd6 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -637,7 +637,7 @@ int nfs_fsync_dir(struct file *filp, struct dentry *dentry, int datasync) * In the case it has, we assume that the dentries are untrustworthy * and may need to be looked up again. */ -static inline int nfs_check_verifier(struct inode *dir, struct dentry *dentry) +static int nfs_check_verifier(struct inode *dir, struct dentry *dentry) { if (IS_ROOT(dentry)) return 1; @@ -652,6 +652,12 @@ static inline void nfs_set_verifier(struct dentry * dentry, unsigned long verf) dentry->d_fsdata = (void *)verf; } +static void nfs_refresh_verifier(struct dentry * dentry, unsigned long verf) +{ + if (time_after(verf, (unsigned long)dentry->d_fsdata)) + nfs_set_verifier(dentry, verf); +} + /* * Whenever an NFS operation succeeds, we know that the dentry * is valid, so we update the revalidation timestamp. @@ -785,7 +791,7 @@ static int nfs_lookup_revalidate(struct dentry * dentry, struct nameidata *nd) goto out_bad; nfs_renew_times(dentry); - nfs_set_verifier(dentry, verifier); + nfs_refresh_verifier(dentry, verifier); out_valid: unlock_kernel(); dput(parent); @@ -1085,7 +1091,7 @@ static int nfs_open_revalidate(struct dentry *dentry, struct nameidata *nd) verifier = nfs_save_change_attribute(dir); ret = nfs4_open_revalidate(dir, dentry, openflags, nd); if (!ret) - nfs_set_verifier(dentry, verifier); + nfs_refresh_verifier(dentry, verifier); unlock_kernel(); out: dput(parent); @@ -1159,10 +1165,13 @@ static struct dentry *nfs_readdir_lookup(nfs_readdir_descriptor_t *desc) dentry = alias; } -out_renew: nfs_renew_times(dentry); nfs_set_verifier(dentry, nfs_save_change_attribute(dir)); return dentry; +out_renew: + nfs_renew_times(dentry); + nfs_refresh_verifier(dentry, nfs_save_change_attribute(dir)); + return dentry; } /* @@ -1700,7 +1709,7 @@ out: if (!error) { d_move(old_dentry, new_dentry); nfs_renew_times(new_dentry); - nfs_set_verifier(new_dentry, nfs_save_change_attribute(new_dir)); + nfs_refresh_verifier(new_dentry, nfs_save_change_attribute(new_dir)); } /* new dentry created? */ -- cgit v0.10.2 From faebf4e2bb0efad9dda396ea13d5c6ad15d7d7fb Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sat, 13 Jan 2007 02:28:11 -0500 Subject: NFSv4: Don't require that NFSv4 mount paths begin with '/' Addresses the regression noted in http://bugzilla.linux-nfs.org/show_bug.cgi?id=134 Also mark a couple of other regressions as requiring fixing. Signed-off-by: Trond Myklebust diff --git a/fs/nfs/getroot.c b/fs/nfs/getroot.c index 8391bd7..6ef268f 100644 --- a/fs/nfs/getroot.c +++ b/fs/nfs/getroot.c @@ -135,17 +135,15 @@ int nfs4_path_walk(struct nfs_server *server, struct nfs_fh lastfh; struct qstr name; int ret; - //int referral_count = 0; dprintk("--> nfs4_path_walk(,,%s)\n", path); fsinfo.fattr = &fattr; nfs_fattr_init(&fattr); - if (*path++ != '/') { - dprintk("nfs4_get_root: Path does not begin with a slash\n"); - return -EINVAL; - } + /* Eat leading slashes */ + while (*path == '/') + path++; /* Start by getting the root filehandle from the server */ ret = server->nfs_client->rpc_ops->getroot(server, mntfh, &fsinfo); @@ -160,6 +158,7 @@ int nfs4_path_walk(struct nfs_server *server, return -ENOTDIR; } + /* FIXME: It is quite valid for the server to return a referral here */ if (fattr.valid & NFS_ATTR_FATTR_V4_REFERRAL) { printk(KERN_ERR "nfs4_get_root:" " getroot obtained referral\n"); @@ -187,6 +186,7 @@ eat_dot_dir: goto eat_dot_dir; } + /* FIXME: Why shouldn't the user be able to use ".." in the path? */ if (path[0] == '.' && path[1] == '.' && (path[2] == '/' || !path[2]) ) { printk(KERN_ERR "nfs4_get_root:" @@ -212,6 +212,7 @@ eat_dot_dir: return -ENOTDIR; } + /* FIXME: Referrals are quite valid here too */ if (fattr.valid & NFS_ATTR_FATTR_V4_REFERRAL) { printk(KERN_ERR "nfs4_get_root:" " lookupfh obtained referral\n"); -- cgit v0.10.2 From c228fd3aeef55637354167faead74c579d5da28b Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sat, 13 Jan 2007 02:28:11 -0500 Subject: NFSv4: Cleanups for fs_locations code. Start long arduous project... What the hell is struct dentry = {}; all about? Signed-off-by: Trond Myklebust diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h index a28f6ce..6610f2b 100644 --- a/fs/nfs/internal.h +++ b/fs/nfs/internal.h @@ -107,10 +107,6 @@ extern __be32 *nfs4_decode_dirent(__be32 *p, struct nfs_entry *entry, int plus); /* nfs4proc.c */ #ifdef CONFIG_NFS_V4 extern struct rpc_procinfo nfs4_procedures[]; - -extern int nfs4_proc_fs_locations(struct inode *dir, struct dentry *dentry, - struct nfs4_fs_locations *fs_locations, - struct page *page); #endif /* dir.c */ diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h index c26cd97..f2c88ff 100644 --- a/fs/nfs/nfs4_fs.h +++ b/fs/nfs/nfs4_fs.h @@ -169,7 +169,7 @@ extern int nfs4_do_close(struct inode *inode, struct nfs4_state *state); extern struct dentry *nfs4_atomic_open(struct inode *, struct dentry *, struct nameidata *); extern int nfs4_open_revalidate(struct inode *, struct dentry *, int, struct nameidata *); extern int nfs4_server_capabilities(struct nfs_server *server, struct nfs_fh *fhandle); -extern int nfs4_proc_fs_locations(struct inode *dir, struct dentry *dentry, +extern int nfs4_proc_fs_locations(struct inode *dir, struct qstr *name, struct nfs4_fs_locations *fs_locations, struct page *page); extern struct nfs4_state_recovery_ops nfs4_reboot_recovery_ops; diff --git a/fs/nfs/nfs4namespace.c b/fs/nfs/nfs4namespace.c index b872779..03a9972 100644 --- a/fs/nfs/nfs4namespace.c +++ b/fs/nfs/nfs4namespace.c @@ -16,6 +16,7 @@ #include #include #include "internal.h" +#include "nfs4_fs.h" #define NFSDBG_FACILITY NFSDBG_VFS @@ -242,7 +243,7 @@ struct vfsmount *nfs_do_refmount(const struct vfsmount *mnt_parent, struct dentr dprintk("%s: getting locations for %s/%s\n", __FUNCTION__, parent->d_name.name, dentry->d_name.name); - err = nfs4_proc_fs_locations(parent->d_inode, dentry, fs_locations, page); + err = nfs4_proc_fs_locations(parent->d_inode, &dentry->d_name, fs_locations, page); dput(parent); if (err != 0 || fs_locations->nlocations <= 0 || diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index b3fd29b..6658592 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -1424,7 +1424,6 @@ static int nfs4_get_referral(struct inode *dir, struct qstr *name, struct nfs_fa int status = -ENOMEM; struct page *page = NULL; struct nfs4_fs_locations *locations = NULL; - struct dentry dentry = {}; page = alloc_page(GFP_KERNEL); if (page == NULL) @@ -1433,9 +1432,7 @@ static int nfs4_get_referral(struct inode *dir, struct qstr *name, struct nfs_fa if (locations == NULL) goto out; - dentry.d_name.name = name->name; - dentry.d_name.len = name->len; - status = nfs4_proc_fs_locations(dir, &dentry, locations, page); + status = nfs4_proc_fs_locations(dir, name, locations, page); if (status != 0) goto out; /* Make sure server returned a different fsid for the referral */ @@ -3585,7 +3582,7 @@ ssize_t nfs4_listxattr(struct dentry *dentry, char *buf, size_t buflen) return len; } -int nfs4_proc_fs_locations(struct inode *dir, struct dentry *dentry, +int nfs4_proc_fs_locations(struct inode *dir, struct qstr *name, struct nfs4_fs_locations *fs_locations, struct page *page) { struct nfs_server *server = NFS_SERVER(dir); @@ -3595,7 +3592,7 @@ int nfs4_proc_fs_locations(struct inode *dir, struct dentry *dentry, }; struct nfs4_fs_locations_arg args = { .dir_fh = NFS_FH(dir), - .name = &dentry->d_name, + .name = name, .page = page, .bitmask = bitmask, }; @@ -3607,7 +3604,7 @@ int nfs4_proc_fs_locations(struct inode *dir, struct dentry *dentry, int status; dprintk("%s: start\n", __FUNCTION__); - fs_locations->fattr.valid = 0; + nfs_fattr_init(&fs_locations->fattr); fs_locations->server = server; fs_locations->nlocations = 0; status = rpc_call_sync(server->client, &msg, 0); -- cgit v0.10.2 From 8e0969f0451eaf7cf32f2ec3946196d8d0b1cb2c Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 13 Dec 2006 15:23:44 -0500 Subject: NFS: Remove nfs_readpage_sync() It makes no sense to maintain 2 parallel systems for reading in pages. Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs3proc.c b/fs/nfs/nfs3proc.c index acd8fe9..7d0371e 100644 --- a/fs/nfs/nfs3proc.c +++ b/fs/nfs/nfs3proc.c @@ -253,29 +253,6 @@ static int nfs3_proc_readlink(struct inode *inode, struct page *page, return status; } -static int nfs3_proc_read(struct nfs_read_data *rdata) -{ - int flags = rdata->flags; - struct inode * inode = rdata->inode; - struct nfs_fattr * fattr = rdata->res.fattr; - struct rpc_message msg = { - .rpc_proc = &nfs3_procedures[NFS3PROC_READ], - .rpc_argp = &rdata->args, - .rpc_resp = &rdata->res, - .rpc_cred = rdata->cred, - }; - int status; - - dprintk("NFS call read %d @ %Ld\n", rdata->args.count, - (long long) rdata->args.offset); - nfs_fattr_init(fattr); - status = rpc_call_sync(NFS_CLIENT(inode), &msg, flags); - if (status >= 0) - nfs_refresh_inode(inode, fattr); - dprintk("NFS reply read: %d\n", status); - return status; -} - /* * Create a regular file. * For now, we don't implement O_EXCL. @@ -855,7 +832,6 @@ const struct nfs_rpc_ops nfs_v3_clientops = { .lookup = nfs3_proc_lookup, .access = nfs3_proc_access, .readlink = nfs3_proc_readlink, - .read = nfs3_proc_read, .create = nfs3_proc_create, .remove = nfs3_proc_remove, .unlink_setup = nfs3_proc_unlink_setup, diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 6658592..5b24461 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -1734,44 +1734,6 @@ static int nfs4_proc_readlink(struct inode *inode, struct page *page, return err; } -static int _nfs4_proc_read(struct nfs_read_data *rdata) -{ - int flags = rdata->flags; - struct inode *inode = rdata->inode; - struct nfs_fattr *fattr = rdata->res.fattr; - struct nfs_server *server = NFS_SERVER(inode); - struct rpc_message msg = { - .rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_READ], - .rpc_argp = &rdata->args, - .rpc_resp = &rdata->res, - .rpc_cred = rdata->cred, - }; - unsigned long timestamp = jiffies; - int status; - - dprintk("NFS call read %d @ %Ld\n", rdata->args.count, - (long long) rdata->args.offset); - - nfs_fattr_init(fattr); - status = rpc_call_sync(server->client, &msg, flags); - if (!status) - renew_lease(server, timestamp); - dprintk("NFS reply read: %d\n", status); - return status; -} - -static int nfs4_proc_read(struct nfs_read_data *rdata) -{ - struct nfs4_exception exception = { }; - int err; - do { - err = nfs4_handle_exception(NFS_SERVER(rdata->inode), - _nfs4_proc_read(rdata), - &exception); - } while (exception.retry); - return err; -} - /* * Got race? * We will need to arrange for the VFS layer to provide an atomic open. @@ -3643,7 +3605,6 @@ const struct nfs_rpc_ops nfs_v4_clientops = { .lookup = nfs4_proc_lookup, .access = nfs4_proc_access, .readlink = nfs4_proc_readlink, - .read = nfs4_proc_read, .create = nfs4_proc_create, .remove = nfs4_proc_remove, .unlink_setup = nfs4_proc_unlink_setup, diff --git a/fs/nfs/proc.c b/fs/nfs/proc.c index 560536a..1dcf56d 100644 --- a/fs/nfs/proc.c +++ b/fs/nfs/proc.c @@ -186,35 +186,6 @@ static int nfs_proc_readlink(struct inode *inode, struct page *page, return status; } -static int nfs_proc_read(struct nfs_read_data *rdata) -{ - int flags = rdata->flags; - struct inode * inode = rdata->inode; - struct nfs_fattr * fattr = rdata->res.fattr; - struct rpc_message msg = { - .rpc_proc = &nfs_procedures[NFSPROC_READ], - .rpc_argp = &rdata->args, - .rpc_resp = &rdata->res, - .rpc_cred = rdata->cred, - }; - int status; - - dprintk("NFS call read %d @ %Ld\n", rdata->args.count, - (long long) rdata->args.offset); - nfs_fattr_init(fattr); - status = rpc_call_sync(NFS_CLIENT(inode), &msg, flags); - if (status >= 0) { - nfs_refresh_inode(inode, fattr); - /* Emulate the eof flag, which isn't normally needed in NFSv2 - * as it is guaranteed to always return the file attributes - */ - if (rdata->args.offset + rdata->args.count >= fattr->size) - rdata->res.eof = 1; - } - dprintk("NFS reply read: %d\n", status); - return status; -} - static int nfs_proc_create(struct inode *dir, struct dentry *dentry, struct iattr *sattr, int flags, struct nameidata *nd) @@ -666,7 +637,6 @@ const struct nfs_rpc_ops nfs_v2_clientops = { .lookup = nfs_proc_lookup, .access = NULL, /* access */ .readlink = nfs_proc_readlink, - .read = nfs_proc_read, .create = nfs_proc_create, .remove = nfs_proc_remove, .unlink_setup = nfs_proc_unlink_setup, diff --git a/fs/nfs/read.c b/fs/nfs/read.c index a9c2652..4affb53 100644 --- a/fs/nfs/read.c +++ b/fs/nfs/read.c @@ -5,14 +5,6 @@ * * Partial copy of Linus' read cache modifications to fs/nfs/file.c * modified for async RPC by okir@monad.swb.de - * - * We do an ugly hack here in order to return proper error codes to the - * user program when a read request failed: since generic_file_read - * only checks the return value of inode->i_op->readpage() which is always 0 - * for async RPC, we set the error bit of the page to 1 when an error occurs, - * and make nfs_readpage transmit requests synchronously when encountering this. - * This is only a small problem, though, since we now retry all operations - * within the RPC code when root squashing is suspected. */ #include @@ -122,93 +114,6 @@ static void nfs_readpage_truncate_uninitialised_page(struct nfs_read_data *data) } } -/* - * Read a page synchronously. - */ -static int nfs_readpage_sync(struct nfs_open_context *ctx, struct inode *inode, - struct page *page) -{ - unsigned int rsize = NFS_SERVER(inode)->rsize; - unsigned int count = PAGE_CACHE_SIZE; - int result = -ENOMEM; - struct nfs_read_data *rdata; - - rdata = nfs_readdata_alloc(count); - if (!rdata) - goto out_unlock; - - memset(rdata, 0, sizeof(*rdata)); - rdata->flags = (IS_SWAPFILE(inode)? NFS_RPC_SWAPFLAGS : 0); - rdata->cred = ctx->cred; - rdata->inode = inode; - INIT_LIST_HEAD(&rdata->pages); - rdata->args.fh = NFS_FH(inode); - rdata->args.context = ctx; - rdata->args.pages = &page; - rdata->args.pgbase = 0UL; - rdata->args.count = rsize; - rdata->res.fattr = &rdata->fattr; - - dprintk("NFS: nfs_readpage_sync(%p)\n", page); - - /* - * This works now because the socket layer never tries to DMA - * into this buffer directly. - */ - do { - if (count < rsize) - rdata->args.count = count; - rdata->res.count = rdata->args.count; - rdata->args.offset = page_offset(page) + rdata->args.pgbase; - - dprintk("NFS: nfs_proc_read(%s, (%s/%Ld), %Lu, %u)\n", - NFS_SERVER(inode)->nfs_client->cl_hostname, - inode->i_sb->s_id, - (long long)NFS_FILEID(inode), - (unsigned long long)rdata->args.pgbase, - rdata->args.count); - - lock_kernel(); - result = NFS_PROTO(inode)->read(rdata); - unlock_kernel(); - - /* - * Even if we had a partial success we can't mark the page - * cache valid. - */ - if (result < 0) { - if (result == -EISDIR) - result = -EINVAL; - goto io_error; - } - count -= result; - rdata->args.pgbase += result; - nfs_add_stats(inode, NFSIOS_SERVERREADBYTES, result); - - /* Note: result == 0 should only happen if we're caching - * a write that extends the file and punches a hole. - */ - if (rdata->res.eof != 0 || result == 0) - break; - } while (count); - spin_lock(&inode->i_lock); - NFS_I(inode)->cache_validity |= NFS_INO_INVALID_ATIME; - spin_unlock(&inode->i_lock); - - if (rdata->res.eof || rdata->res.count == rdata->args.count) { - SetPageUptodate(page); - if (rdata->res.eof && count != 0) - memclear_highpage_flush(page, rdata->args.pgbase, count); - } - result = 0; - -io_error: - nfs_readdata_free(rdata); -out_unlock: - unlock_page(page); - return result; -} - static int nfs_readpage_async(struct nfs_open_context *ctx, struct inode *inode, struct page *page) { @@ -621,15 +526,9 @@ int nfs_readpage(struct file *file, struct page *page) } else ctx = get_nfs_open_context((struct nfs_open_context *) file->private_data); - if (!IS_SYNC(inode)) { - error = nfs_readpage_async(ctx, inode, page); - goto out; - } - error = nfs_readpage_sync(ctx, inode, page); - if (error < 0 && IS_SWAPFILE(inode)) - printk("Aiee.. nfs swap-in of page failed!\n"); -out: + error = nfs_readpage_async(ctx, inode, page); + put_nfs_open_context(ctx); return error; diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 9ee9da5..115c812 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -784,7 +784,6 @@ struct nfs_rpc_ops { int (*access) (struct inode *, struct nfs_access_entry *); int (*readlink)(struct inode *, struct page *, unsigned int, unsigned int); - int (*read) (struct nfs_read_data *); int (*create) (struct inode *, struct dentry *, struct iattr *, int, struct nameidata *); int (*remove) (struct inode *, struct qstr *); -- cgit v0.10.2 From 02241bc47e8961768de83d855accd0dcad1df045 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sat, 13 Jan 2007 02:28:07 -0500 Subject: NFS: Ensure that ->writepage() uses flush_stable() when reclaiming pages Signed-off-by: Trond Myklebust diff --git a/fs/nfs/write.c b/fs/nfs/write.c index 345492e..966b8db 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -323,7 +323,7 @@ static int nfs_writepage_locked(struct page *page, struct writeback_control *wbc err = 0; out: if (!wbc->for_writepages) - nfs_flush_mapping(page->mapping, wbc, wb_priority(wbc)); + nfs_flush_mapping(page->mapping, wbc, FLUSH_STABLE|wb_priority(wbc)); return err; } -- cgit v0.10.2 From f40313ac39fedca519c36fdc454acf2632e641da Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sat, 13 Jan 2007 02:28:08 -0500 Subject: NFS: Micro-optimisation for nfs_wb_page() Signed-off-by: Trond Myklebust diff --git a/fs/nfs/write.c b/fs/nfs/write.c index 966b8db..fab214a 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -1516,6 +1516,8 @@ int nfs_wb_page_priority(struct inode *inode, struct page *page, int how) if (ret < 0) goto out; } + if (!PagePrivate(page)) + return 0; ret = nfs_sync_mapping_wait(page->mapping, &wbc, how); if (ret >= 0) return 0; -- cgit v0.10.2 From d30c8348a4ba292a09addd122de2f3189c21a7ff Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 13 Dec 2006 15:23:47 -0500 Subject: NFS: nfs_writepages() cleanup Strip out the call to nfs_commit_inode(), and allow that to be done by nfs_write_inode(). Signed-off-by: Trond Myklebust diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index d834982..4ef4547 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -65,13 +65,18 @@ nfs_fattr_to_ino_t(struct nfs_fattr *fattr) int nfs_write_inode(struct inode *inode, int sync) { - int flags = sync ? FLUSH_SYNC : 0; int ret; - ret = nfs_commit_inode(inode, flags); - if (ret < 0) - return ret; - return 0; + if (sync) { + ret = filemap_fdatawait(inode->i_mapping); + if (ret == 0) + ret = nfs_commit_inode(inode, FLUSH_SYNC); + } else + ret = nfs_commit_inode(inode, 0); + if (ret >= 0) + return 0; + __mark_inode_dirty(inode, I_DIRTY_DATASYNC); + return ret; } void nfs_clear_inode(struct inode *inode) diff --git a/fs/nfs/write.c b/fs/nfs/write.c index fab214a..f983c51 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -79,7 +79,6 @@ static struct nfs_page * nfs_update_request(struct nfs_open_context*, unsigned int, unsigned int); static void nfs_mark_request_dirty(struct nfs_page *req); static int nfs_wait_on_write_congestion(struct address_space *, int); -static int nfs_wait_on_requests(struct inode *, unsigned long, unsigned int); static long nfs_flush_mapping(struct address_space *mapping, struct writeback_control *wbc, int how); static const struct rpc_call_ops nfs_write_partial_ops; static const struct rpc_call_ops nfs_write_full_ops; @@ -360,14 +359,7 @@ int nfs_writepages(struct address_space *mapping, struct writeback_control *wbc) if (err < 0) goto out; nfs_add_stats(inode, NFSIOS_WRITEPAGES, err); - if (!wbc->nonblocking && wbc->sync_mode == WB_SYNC_ALL) { - err = nfs_wait_on_requests(inode, 0, 0); - if (err < 0) - goto out; - } - err = nfs_commit_inode(inode, wb_priority(wbc)); - if (err > 0) - err = 0; + err = 0; out: clear_bit(BDI_write_congested, &bdi->state); wake_up_all(&nfs_write_congestion); @@ -516,17 +508,6 @@ static int nfs_wait_on_requests_locked(struct inode *inode, unsigned long idx_st return res; } -static int nfs_wait_on_requests(struct inode *inode, unsigned long idx_start, unsigned int npages) -{ - struct nfs_inode *nfsi = NFS_I(inode); - int ret; - - spin_lock(&nfsi->req_lock); - ret = nfs_wait_on_requests_locked(inode, idx_start, npages); - spin_unlock(&nfsi->req_lock); - return ret; -} - static void nfs_cancel_dirty_list(struct list_head *head) { struct nfs_page *req; -- cgit v0.10.2 From 7c85d9007d05436e71d2b805b96c1e36a8193bd4 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 13 Dec 2006 15:23:48 -0500 Subject: NFS: Fixup some outdated comments... Signed-off-by: Trond Myklebust diff --git a/fs/nfs/write.c b/fs/nfs/write.c index f983c51..e9eff93 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -1,47 +1,7 @@ /* * linux/fs/nfs/write.c * - * Writing file data over NFS. - * - * We do it like this: When a (user) process wishes to write data to an - * NFS file, a write request is allocated that contains the RPC task data - * plus some info on the page to be written, and added to the inode's - * write chain. If the process writes past the end of the page, an async - * RPC call to write the page is scheduled immediately; otherwise, the call - * is delayed for a few seconds. - * - * Just like readahead, no async I/O is performed if wsize < PAGE_SIZE. - * - * Write requests are kept on the inode's writeback list. Each entry in - * that list references the page (portion) to be written. When the - * cache timeout has expired, the RPC task is woken up, and tries to - * lock the page. As soon as it manages to do so, the request is moved - * from the writeback list to the writelock list. - * - * Note: we must make sure never to confuse the inode passed in the - * write_page request with the one in page->inode. As far as I understand - * it, these are different when doing a swap-out. - * - * To understand everything that goes on here and in the NFS read code, - * one should be aware that a page is locked in exactly one of the following - * cases: - * - * - A write request is in progress. - * - A user process is in generic_file_write/nfs_update_page - * - A user process is in generic_file_read - * - * Also note that because of the way pages are invalidated in - * nfs_revalidate_inode, the following assertions hold: - * - * - If a page is dirty, there will be no read requests (a page will - * not be re-read unless invalidated by nfs_revalidate_inode). - * - If the page is not uptodate, there will be no pending write - * requests, and no process will be in nfs_update_page. - * - * FIXME: Interaction with the vmscan routines is not optimal yet. - * Either vmscan must be made nfs-savvy, or we need a different page - * reclaim concept that supports something like FS-independent - * buffer_heads with a b_ops-> field. + * Write file data over NFS. * * Copyright (C) 1996, 1997, Olaf Kirch */ -- cgit v0.10.2 From a6a352e93dfa78db8903f0e3610abb76efbf7fc9 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 13 Dec 2006 16:43:06 -0500 Subject: NFSv4: Don't start state recovery in nfs4_close_done() We might not even have any open files at this point... Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 5b24461..35bfcce 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -1140,7 +1140,6 @@ static void nfs4_close_done(struct rpc_task *task, void *data) break; case -NFS4ERR_STALE_STATEID: case -NFS4ERR_EXPIRED: - nfs4_schedule_state_recovery(server->nfs_client); break; default: if (nfs4_async_handle_error(task, server) == -EAGAIN) { @@ -2955,7 +2954,6 @@ int nfs4_proc_delegreturn(struct inode *inode, struct rpc_cred *cred, const nfs4 switch (err) { case -NFS4ERR_STALE_STATEID: case -NFS4ERR_EXPIRED: - nfs4_schedule_state_recovery(server->nfs_client); case 0: return 0; } @@ -3109,12 +3107,10 @@ static void nfs4_locku_done(struct rpc_task *task, void *data) break; case -NFS4ERR_STALE_STATEID: case -NFS4ERR_EXPIRED: - nfs4_schedule_state_recovery(calldata->server->nfs_client); break; default: - if (nfs4_async_handle_error(task, calldata->server) == -EAGAIN) { + if (nfs4_async_handle_error(task, calldata->server) == -EAGAIN) rpc_restart_call(task); - } } } -- cgit v0.10.2 From e148582e10a2c1a23dfc09210df4a18bc6cca4e9 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 13 Dec 2006 16:43:13 -0500 Subject: NFSv4: Add lockdep checks to nfs4_wait_clnt_recover() Attempt to detect deadlocks due to caller holding locks on clp->cl_sem Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 35bfcce..1712d03 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2711,11 +2711,15 @@ static int nfs4_wait_clnt_recover(struct rpc_clnt *clnt, struct nfs_client *clp) might_sleep(); + rwsem_acquire(&clp->cl_sem.dep_map, 0, 0, _RET_IP_); + rpc_clnt_sigmask(clnt, &oldset); res = wait_on_bit(&clp->cl_state, NFS4CLNT_STATE_RECOVER, nfs4_wait_bit_interruptible, TASK_INTERRUPTIBLE); rpc_clnt_sigunmask(clnt, &oldset); + + rwsem_release(&clp->cl_sem.dep_map, 1, _RET_IP_); return res; } -- cgit v0.10.2 From 4dc2eaecd4cf0687727e418540bccf956a62ebcf Mon Sep 17 00:00:00 2001 From: Benny Halevy Date: Wed, 20 Dec 2006 22:29:46 +0200 Subject: NFS: move NFS_DEBUG definition Trond, looks like the changes to include/linux/nfs_fs.h in 2.6.18 that moved the #include's of sunrpc header files into the #ifdef __KERNEL__ block disabled nfs debugging for all nfs c file not including any sunrpc header. The following patch moves the definition down, right before its use for defining ifdebug. Signed-off-by: Benny Halevy (Moved definition further down into the __KERNEL__ section: Trond) Signed-off-by: Trond Myklebust diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index c5d4084..c0d03767 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -11,14 +11,6 @@ #include -/* - * Enable debugging support for nfs client. - * Requires RPC_DEBUG. - */ -#ifdef RPC_DEBUG -# define NFS_DEBUG -#endif - /* Default timeout values */ #define NFS_MAX_UDP_TIMEOUT (60*HZ) #define NFS_MAX_TCP_TIMEOUT (600*HZ) @@ -567,6 +559,15 @@ extern void * nfs_root_data(void); #define NFSDBG_ALL 0xFFFF #ifdef __KERNEL__ + +/* + * Enable debugging support for nfs client. + * Requires RPC_DEBUG. + */ +#ifdef RPC_DEBUG +# define NFS_DEBUG +#endif + # undef ifdebug # ifdef NFS_DEBUG # define ifdebug(fac) if (unlikely(nfs_debug & NFSDBG_##fac)) -- cgit v0.10.2 From a3f565b1e530a756472401835107d08fd291f242 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Wed, 31 Jan 2007 12:14:01 -0500 Subject: NFS: fix print format for tk_pid The tk_pid field is an unsigned short. The proper print format specifier for that type is %5u, not %4d. Also clean up some miscellaneous print formatting nits. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c index bd21d7f..b1c98ea 100644 --- a/fs/nfs/direct.c +++ b/fs/nfs/direct.c @@ -309,7 +309,8 @@ static ssize_t nfs_direct_read_schedule(struct nfs_direct_req *dreq, unsigned lo rpc_execute(&data->task); - dfprintk(VFS, "NFS: %5u initiated direct read call (req %s/%Ld, %zu bytes @ offset %Lu)\n", + dprintk("NFS: %5u initiated direct read call " + "(req %s/%Ld, %zu bytes @ offset %Lu)\n", data->task.tk_pid, inode->i_sb->s_id, (long long)NFS_FILEID(inode), @@ -639,7 +640,8 @@ static ssize_t nfs_direct_write_schedule(struct nfs_direct_req *dreq, unsigned l rpc_execute(&data->task); - dfprintk(VFS, "NFS: %5u initiated direct write call (req %s/%Ld, %zu bytes @ offset %Lu)\n", + dprintk("NFS: %5u initiated direct write call " + "(req %s/%Ld, %zu bytes @ offset %Lu)\n", data->task.tk_pid, inode->i_sb->s_id, (long long)NFS_FILEID(inode), @@ -797,7 +799,7 @@ ssize_t nfs_file_direct_write(struct kiocb *iocb, const struct iovec *iov, const char __user *buf = iov[0].iov_base; size_t count = iov[0].iov_len; - dfprintk(VFS, "nfs: direct write(%s/%s, %lu@%Ld)\n", + dprintk("nfs: direct write(%s/%s, %lu@%Ld)\n", file->f_path.dentry->d_parent->d_name.name, file->f_path.dentry->d_name.name, (unsigned long) count, (long long) pos); diff --git a/fs/nfs/read.c b/fs/nfs/read.c index 4affb53..6ab4d5a 100644 --- a/fs/nfs/read.c +++ b/fs/nfs/read.c @@ -183,7 +183,7 @@ static void nfs_read_rpcsetup(struct nfs_page *req, struct nfs_read_data *data, data->task.tk_cookie = (unsigned long)inode; - dprintk("NFS: %4d initiated read call (req %s/%Ld, %u bytes @ offset %Lu)\n", + dprintk("NFS: %5u initiated read call (req %s/%Ld, %u bytes @ offset %Lu)\n", data->task.tk_pid, inode->i_sb->s_id, (long long)NFS_FILEID(inode), @@ -357,7 +357,7 @@ int nfs_readpage_result(struct rpc_task *task, struct nfs_read_data *data) { int status; - dprintk("%s: %4d, (status %d)\n", __FUNCTION__, task->tk_pid, + dprintk("NFS: %s: %5u, (status %d)\n", __FUNCTION__, task->tk_pid, task->tk_status); status = NFS_PROTO(data->inode)->read_done(task, data); diff --git a/fs/nfs/write.c b/fs/nfs/write.c index e9eff93..dea1737 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -793,7 +793,8 @@ static void nfs_write_rpcsetup(struct nfs_page *req, data->task.tk_priority = flush_task_priority(how); data->task.tk_cookie = (unsigned long)inode; - dprintk("NFS: %4d initiated write call (req %s/%Ld, %u bytes @ offset %Lu)\n", + dprintk("NFS: %5u initiated write call " + "(req %s/%Ld, %u bytes @ offset %Lu)\n", data->task.tk_pid, inode->i_sb->s_id, (long long)NFS_FILEID(inode), @@ -1075,7 +1076,7 @@ int nfs_writeback_done(struct rpc_task *task, struct nfs_write_data *data) struct nfs_writeres *resp = &data->res; int status; - dprintk("NFS: %4d nfs_writeback_done (status %d)\n", + dprintk("NFS: %5u nfs_writeback_done (status %d)\n", task->tk_pid, task->tk_status); /* @@ -1191,7 +1192,7 @@ static void nfs_commit_rpcsetup(struct list_head *head, data->task.tk_priority = flush_task_priority(how); data->task.tk_cookie = (unsigned long)inode; - dprintk("NFS: %4d initiated commit call\n", data->task.tk_pid); + dprintk("NFS: %5u initiated commit call\n", data->task.tk_pid); } /* @@ -1232,7 +1233,7 @@ static void nfs_commit_done(struct rpc_task *task, void *calldata) struct nfs_write_data *data = calldata; struct nfs_page *req; - dprintk("NFS: %4d nfs_commit_done (status %d)\n", + dprintk("NFS: %5u nfs_commit_done (status %d)\n", task->tk_pid, task->tk_status); /* Call the NFS version-specific code */ -- cgit v0.10.2 From 8885cb367f86ce02bed3bf18192d74a53ac3b81f Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Wed, 31 Jan 2007 12:14:05 -0500 Subject: SUNRPC: fix print format for tk_pid in auth_gss support The tk_pid field is an unsigned short. The proper print format specifier for that type is %5u, not %4d. Also clean up some miscellaneous print formatting nits. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index e1a104a..2fe8e91 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -241,7 +241,7 @@ gss_fill_context(const void *p, const void *end, struct gss_cl_ctx *ctx, struct } return q; err: - dprintk("RPC: gss_fill_context returning %ld\n", -PTR_ERR(p)); + dprintk("RPC: gss_fill_context returning %ld\n", -PTR_ERR(p)); return p; } @@ -276,10 +276,10 @@ __gss_find_upcall(struct gss_auth *gss_auth, uid_t uid) if (pos->uid != uid) continue; atomic_inc(&pos->count); - dprintk("RPC: gss_find_upcall found msg %p\n", pos); + dprintk("RPC: gss_find_upcall found msg %p\n", pos); return pos; } - dprintk("RPC: gss_find_upcall found nothing\n"); + dprintk("RPC: gss_find_upcall found nothing\n"); return NULL; } @@ -393,7 +393,8 @@ gss_refresh_upcall(struct rpc_task *task) struct gss_upcall_msg *gss_msg; int err = 0; - dprintk("RPC: %4u gss_refresh_upcall for uid %u\n", task->tk_pid, cred->cr_uid); + dprintk("RPC: %5u gss_refresh_upcall for uid %u\n", task->tk_pid, + cred->cr_uid); gss_msg = gss_setup_upcall(task->tk_client, gss_auth, cred); if (IS_ERR(gss_msg)) { err = PTR_ERR(gss_msg); @@ -413,8 +414,8 @@ gss_refresh_upcall(struct rpc_task *task) spin_unlock(&gss_auth->lock); gss_release_msg(gss_msg); out: - dprintk("RPC: %4u gss_refresh_upcall for uid %u result %d\n", task->tk_pid, - cred->cr_uid, err); + dprintk("RPC: %5u gss_refresh_upcall for uid %u result %d\n", + task->tk_pid, cred->cr_uid, err); return err; } @@ -426,7 +427,7 @@ gss_create_upcall(struct gss_auth *gss_auth, struct gss_cred *gss_cred) DEFINE_WAIT(wait); int err = 0; - dprintk("RPC: gss_upcall for uid %u\n", cred->cr_uid); + dprintk("RPC: gss_upcall for uid %u\n", cred->cr_uid); gss_msg = gss_setup_upcall(gss_auth->client, gss_auth, cred); if (IS_ERR(gss_msg)) { err = PTR_ERR(gss_msg); @@ -454,7 +455,8 @@ out_intr: finish_wait(&gss_msg->waitqueue, &wait); gss_release_msg(gss_msg); out: - dprintk("RPC: gss_create_upcall for uid %u result %d\n", cred->cr_uid, err); + dprintk("RPC: gss_create_upcall for uid %u result %d\n", + cred->cr_uid, err); return err; } @@ -546,14 +548,14 @@ gss_pipe_downcall(struct file *filp, const char __user *src, size_t mlen) } gss_put_ctx(ctx); kfree(buf); - dprintk("RPC: gss_pipe_downcall returning length %Zu\n", mlen); + dprintk("RPC: gss_pipe_downcall returning length %Zu\n", mlen); return mlen; err_put_ctx: gss_put_ctx(ctx); err: kfree(buf); out: - dprintk("RPC: gss_pipe_downcall returning %d\n", err); + dprintk("RPC: gss_pipe_downcall returning %d\n", err); return err; } @@ -591,7 +593,7 @@ gss_pipe_destroy_msg(struct rpc_pipe_msg *msg) static unsigned long ratelimit; if (msg->errno < 0) { - dprintk("RPC: gss_pipe_destroy_msg releasing msg %p\n", + dprintk("RPC: gss_pipe_destroy_msg releasing msg %p\n", gss_msg); atomic_inc(&gss_msg->count); gss_unhash_msg(gss_msg); @@ -618,7 +620,7 @@ gss_create(struct rpc_clnt *clnt, rpc_authflavor_t flavor) struct rpc_auth * auth; int err = -ENOMEM; /* XXX? */ - dprintk("RPC: creating GSS authenticator for client %p\n",clnt); + dprintk("RPC: creating GSS authenticator for client %p\n", clnt); if (!try_module_get(THIS_MODULE)) return ERR_PTR(err); @@ -670,8 +672,8 @@ gss_destroy(struct rpc_auth *auth) { struct gss_auth *gss_auth; - dprintk("RPC: destroying GSS authenticator %p flavor %d\n", - auth, auth->au_flavor); + dprintk("RPC: destroying GSS authenticator %p flavor %d\n", + auth, auth->au_flavor); gss_auth = container_of(auth, struct gss_auth, rpc_auth); rpc_unlink(gss_auth->dentry); @@ -689,7 +691,7 @@ gss_destroy(struct rpc_auth *auth) static void gss_destroy_ctx(struct gss_cl_ctx *ctx) { - dprintk("RPC: gss_destroy_ctx\n"); + dprintk("RPC: gss_destroy_ctx\n"); if (ctx->gc_gss_ctx) gss_delete_sec_context(&ctx->gc_gss_ctx); @@ -703,7 +705,7 @@ gss_destroy_cred(struct rpc_cred *rc) { struct gss_cred *cred = container_of(rc, struct gss_cred, gc_base); - dprintk("RPC: gss_destroy_cred \n"); + dprintk("RPC: gss_destroy_cred \n"); if (cred->gc_ctx) gss_put_ctx(cred->gc_ctx); @@ -726,7 +728,7 @@ gss_create_cred(struct rpc_auth *auth, struct auth_cred *acred, int flags) struct gss_cred *cred = NULL; int err = -ENOMEM; - dprintk("RPC: gss_create_cred for uid %d, flavor %d\n", + dprintk("RPC: gss_create_cred for uid %d, flavor %d\n", acred->uid, auth->au_flavor); if (!(cred = kzalloc(sizeof(*cred), GFP_KERNEL))) @@ -745,7 +747,7 @@ gss_create_cred(struct rpc_auth *auth, struct auth_cred *acred, int flags) return &cred->gc_base; out_err: - dprintk("RPC: gss_create_cred failed with error %d\n", err); + dprintk("RPC: gss_create_cred failed with error %d\n", err); return ERR_PTR(err); } @@ -799,7 +801,7 @@ gss_marshal(struct rpc_task *task, __be32 *p) struct kvec iov; struct xdr_buf verf_buf; - dprintk("RPC: %4u gss_marshal\n", task->tk_pid); + dprintk("RPC: %5u gss_marshal\n", task->tk_pid); *p++ = htonl(RPC_AUTH_GSS); cred_len = p++; @@ -865,7 +867,7 @@ gss_validate(struct rpc_task *task, __be32 *p) u32 flav,len; u32 maj_stat; - dprintk("RPC: %4u gss_validate\n", task->tk_pid); + dprintk("RPC: %5u gss_validate\n", task->tk_pid); flav = ntohl(*p++); if ((len = ntohl(*p++)) > RPC_MAX_AUTH_SIZE) @@ -888,12 +890,12 @@ gss_validate(struct rpc_task *task, __be32 *p) * calculate the length of the verifier: */ task->tk_auth->au_verfsize = XDR_QUADLEN(len) + 2; gss_put_ctx(ctx); - dprintk("RPC: %4u GSS gss_validate: gss_verify_mic succeeded.\n", + dprintk("RPC: %5u gss_validate: gss_verify_mic succeeded.\n", task->tk_pid); return p + XDR_QUADLEN(len); out_bad: gss_put_ctx(ctx); - dprintk("RPC: %4u gss_validate failed.\n", task->tk_pid); + dprintk("RPC: %5u gss_validate failed.\n", task->tk_pid); return NULL; } @@ -1063,7 +1065,7 @@ gss_wrap_req(struct rpc_task *task, struct gss_cl_ctx *ctx = gss_cred_get_ctx(cred); int status = -EIO; - dprintk("RPC: %4u gss_wrap_req\n", task->tk_pid); + dprintk("RPC: %5u gss_wrap_req\n", task->tk_pid); if (ctx->gc_proc != RPC_GSS_PROC_DATA) { /* The spec seems a little ambiguous here, but I think that not * wrapping context destruction requests makes the most sense. @@ -1086,7 +1088,7 @@ gss_wrap_req(struct rpc_task *task, } out: gss_put_ctx(ctx); - dprintk("RPC: %4u gss_wrap_req returning %d\n", task->tk_pid, status); + dprintk("RPC: %5u gss_wrap_req returning %d\n", task->tk_pid, status); return status; } @@ -1192,7 +1194,7 @@ out_decode: status = decode(rqstp, p, obj); out: gss_put_ctx(ctx); - dprintk("RPC: %4u gss_unwrap_resp returning %d\n", task->tk_pid, + dprintk("RPC: %5u gss_unwrap_resp returning %d\n", task->tk_pid, status); return status; } diff --git a/net/sunrpc/auth_gss/gss_krb5_crypto.c b/net/sunrpc/auth_gss/gss_krb5_crypto.c index d926cda..cd64efd 100644 --- a/net/sunrpc/auth_gss/gss_krb5_crypto.c +++ b/net/sunrpc/auth_gss/gss_krb5_crypto.c @@ -66,7 +66,7 @@ krb5_encrypt( goto out; if (crypto_blkcipher_ivsize(tfm) > 16) { - dprintk("RPC: gss_k5encrypt: tfm iv size to large %d\n", + dprintk("RPC: gss_k5encrypt: tfm iv size to large %d\n", crypto_blkcipher_ivsize(tfm)); goto out; } @@ -79,7 +79,7 @@ krb5_encrypt( ret = crypto_blkcipher_encrypt_iv(&desc, sg, sg, length); out: - dprintk("RPC: krb5_encrypt returns %d\n",ret); + dprintk("RPC: krb5_encrypt returns %d\n", ret); return ret; } @@ -102,7 +102,7 @@ krb5_decrypt( goto out; if (crypto_blkcipher_ivsize(tfm) > 16) { - dprintk("RPC: gss_k5decrypt: tfm iv size to large %d\n", + dprintk("RPC: gss_k5decrypt: tfm iv size to large %d\n", crypto_blkcipher_ivsize(tfm)); goto out; } @@ -114,7 +114,7 @@ krb5_decrypt( ret = crypto_blkcipher_decrypt_iv(&desc, sg, sg, length); out: - dprintk("RPC: gss_k5decrypt returns %d\n",ret); + dprintk("RPC: gss_k5decrypt returns %d\n",ret); return ret; } diff --git a/net/sunrpc/auth_gss/gss_krb5_mech.c b/net/sunrpc/auth_gss/gss_krb5_mech.c index 05d4bee..7b19432 100644 --- a/net/sunrpc/auth_gss/gss_krb5_mech.c +++ b/net/sunrpc/auth_gss/gss_krb5_mech.c @@ -175,7 +175,8 @@ gss_import_sec_context_kerberos(const void *p, } ctx_id->internal_ctx_id = ctx; - dprintk("RPC: Successfully imported new context.\n"); + + dprintk("RPC: Successfully imported new context.\n"); return 0; out_err_free_key2: diff --git a/net/sunrpc/auth_gss/gss_krb5_seal.c b/net/sunrpc/auth_gss/gss_krb5_seal.c index d0bb506..a0d9faa 100644 --- a/net/sunrpc/auth_gss/gss_krb5_seal.c +++ b/net/sunrpc/auth_gss/gss_krb5_seal.c @@ -83,7 +83,7 @@ gss_get_mic_kerberos(struct gss_ctx *gss_ctx, struct xdr_buf *text, s32 now; u32 seq_send; - dprintk("RPC: gss_krb5_seal\n"); + dprintk("RPC: gss_krb5_seal\n"); now = get_seconds(); diff --git a/net/sunrpc/auth_gss/gss_krb5_seqnum.c b/net/sunrpc/auth_gss/gss_krb5_seqnum.c index c604baf..2f0b112 100644 --- a/net/sunrpc/auth_gss/gss_krb5_seqnum.c +++ b/net/sunrpc/auth_gss/gss_krb5_seqnum.c @@ -70,7 +70,7 @@ krb5_get_seq_num(struct crypto_blkcipher *key, s32 code; unsigned char plain[8]; - dprintk("RPC: krb5_get_seq_num:\n"); + dprintk("RPC: krb5_get_seq_num:\n"); if ((code = krb5_decrypt(key, cksum, buf, plain, 8))) return code; diff --git a/net/sunrpc/auth_gss/gss_krb5_unseal.c b/net/sunrpc/auth_gss/gss_krb5_unseal.c index 87f8977..e30a993 100644 --- a/net/sunrpc/auth_gss/gss_krb5_unseal.c +++ b/net/sunrpc/auth_gss/gss_krb5_unseal.c @@ -86,7 +86,7 @@ gss_verify_mic_kerberos(struct gss_ctx *gss_ctx, unsigned char *ptr = (unsigned char *)read_token->data; int bodysize; - dprintk("RPC: krb5_read_token\n"); + dprintk("RPC: krb5_read_token\n"); if (g_verify_token_header(&ctx->mech_used, &bodysize, &ptr, read_token->len)) diff --git a/net/sunrpc/auth_gss/gss_krb5_wrap.c b/net/sunrpc/auth_gss/gss_krb5_wrap.c index fe25b3d..42b3220 100644 --- a/net/sunrpc/auth_gss/gss_krb5_wrap.c +++ b/net/sunrpc/auth_gss/gss_krb5_wrap.c @@ -129,7 +129,7 @@ gss_wrap_kerberos(struct gss_ctx *ctx, int offset, struct page **tmp_pages; u32 seq_send; - dprintk("RPC: gss_wrap_kerberos\n"); + dprintk("RPC: gss_wrap_kerberos\n"); now = get_seconds(); @@ -215,7 +215,7 @@ gss_unwrap_kerberos(struct gss_ctx *ctx, int offset, struct xdr_buf *buf) int data_len; int blocksize; - dprintk("RPC: gss_unwrap_kerberos\n"); + dprintk("RPC: gss_unwrap_kerberos\n"); ptr = (u8 *)buf->head[0].iov_base + offset; if (g_verify_token_header(&kctx->mech_used, &bodysize, &ptr, diff --git a/net/sunrpc/auth_gss/gss_mech_switch.c b/net/sunrpc/auth_gss/gss_mech_switch.c index 3db7453..c7681db 100644 --- a/net/sunrpc/auth_gss/gss_mech_switch.c +++ b/net/sunrpc/auth_gss/gss_mech_switch.c @@ -113,7 +113,7 @@ gss_mech_register(struct gss_api_mech *gm) spin_lock(®istered_mechs_lock); list_add(&gm->gm_list, ®istered_mechs); spin_unlock(®istered_mechs_lock); - dprintk("RPC: registered gss mechanism %s\n", gm->gm_name); + dprintk("RPC: registered gss mechanism %s\n", gm->gm_name); return 0; } @@ -125,7 +125,7 @@ gss_mech_unregister(struct gss_api_mech *gm) spin_lock(®istered_mechs_lock); list_del(&gm->gm_list); spin_unlock(®istered_mechs_lock); - dprintk("RPC: unregistered gss mechanism %s\n", gm->gm_name); + dprintk("RPC: unregistered gss mechanism %s\n", gm->gm_name); gss_mech_free(gm); } @@ -298,7 +298,7 @@ gss_unwrap(struct gss_ctx *ctx_id, u32 gss_delete_sec_context(struct gss_ctx **context_handle) { - dprintk("RPC: gss_delete_sec_context deleting %p\n", + dprintk("RPC: gss_delete_sec_context deleting %p\n", *context_handle); if (!*context_handle) diff --git a/net/sunrpc/auth_gss/gss_spkm3_mech.c b/net/sunrpc/auth_gss/gss_spkm3_mech.c index 8ef3f1c..7e15aa6 100644 --- a/net/sunrpc/auth_gss/gss_spkm3_mech.c +++ b/net/sunrpc/auth_gss/gss_spkm3_mech.c @@ -97,7 +97,8 @@ gss_import_sec_context_spkm3(const void *p, size_t len, if (IS_ERR(p)) goto out_err_free_ctx; if (version != 1) { - dprintk("RPC: unknown spkm3 token format: obsolete nfs-utils?\n"); + dprintk("RPC: unknown spkm3 token format: " + "obsolete nfs-utils?\n"); goto out_err_free_ctx; } @@ -138,7 +139,7 @@ gss_import_sec_context_spkm3(const void *p, size_t len, ctx_id->internal_ctx_id = ctx; - dprintk("Successfully imported new spkm context.\n"); + dprintk("RPC: Successfully imported new spkm context.\n"); return 0; out_err_free_intg_key: @@ -183,7 +184,7 @@ gss_verify_mic_spkm3(struct gss_ctx *ctx, maj_stat = spkm3_read_token(sctx, checksum, signbuf, SPKM_MIC_TOK); - dprintk("RPC: gss_verify_mic_spkm3 returning %d\n", maj_stat); + dprintk("RPC: gss_verify_mic_spkm3 returning %d\n", maj_stat); return maj_stat; } @@ -197,7 +198,7 @@ gss_get_mic_spkm3(struct gss_ctx *ctx, err = spkm3_make_token(sctx, message_buffer, message_token, SPKM_MIC_TOK); - dprintk("RPC: gss_get_mic_spkm3 returning %d\n", err); + dprintk("RPC: gss_get_mic_spkm3 returning %d\n", err); return err; } diff --git a/net/sunrpc/auth_gss/gss_spkm3_seal.c b/net/sunrpc/auth_gss/gss_spkm3_seal.c index b179d58..104cbf4 100644 --- a/net/sunrpc/auth_gss/gss_spkm3_seal.c +++ b/net/sunrpc/auth_gss/gss_spkm3_seal.c @@ -75,20 +75,21 @@ spkm3_make_token(struct spkm3_ctx *ctx, now = jiffies; if (ctx->ctx_id.len != 16) { - dprintk("RPC: spkm3_make_token BAD ctx_id.len %d\n", + dprintk("RPC: spkm3_make_token BAD ctx_id.len %d\n", ctx->ctx_id.len); goto out_err; } if (!g_OID_equal(&ctx->intg_alg, &hmac_md5_oid)) { - dprintk("RPC: gss_spkm3_seal: unsupported I-ALG algorithm." - "only support hmac-md5 I-ALG.\n"); + dprintk("RPC: gss_spkm3_seal: unsupported I-ALG " + "algorithm. only support hmac-md5 I-ALG.\n"); goto out_err; } else checksum_type = CKSUMTYPE_HMAC_MD5; if (!g_OID_equal(&ctx->conf_alg, &cast5_cbc_oid)) { - dprintk("RPC: gss_spkm3_seal: unsupported C-ALG algorithm\n"); + dprintk("RPC: gss_spkm3_seal: unsupported C-ALG " + "algorithm\n"); goto out_err; } @@ -113,7 +114,8 @@ spkm3_make_token(struct spkm3_ctx *ctx, spkm3_make_mic_token(&ptr, tokenlen, &mic_hdr, &md5cksum, md5elen, md5zbit); } else if (toktype == SPKM_WRAP_TOK) { /* Not Supported */ - dprintk("RPC: gss_spkm3_seal: SPKM_WRAP_TOK not supported\n"); + dprintk("RPC: gss_spkm3_seal: SPKM_WRAP_TOK " + "not supported\n"); goto out_err; } @@ -153,7 +155,7 @@ make_spkm3_checksum(s32 cksumtype, struct xdr_netobj *key, char *header, cksumname = "md5"; break; default: - dprintk("RPC: spkm3_make_checksum:" + dprintk("RPC: spkm3_make_checksum:" " unsupported checksum %d", cksumtype); return GSS_S_FAILURE; } diff --git a/net/sunrpc/auth_gss/gss_spkm3_token.c b/net/sunrpc/auth_gss/gss_spkm3_token.c index 35188b6..156413a 100644 --- a/net/sunrpc/auth_gss/gss_spkm3_token.c +++ b/net/sunrpc/auth_gss/gss_spkm3_token.c @@ -209,7 +209,7 @@ spkm3_verify_mic_token(unsigned char **tokp, int *mic_hdrlen, unsigned char **ck /* spkm3 innercontext token preamble */ if ((ptr[0] != 0xa4) || (ptr[2] != 0x30)) { - dprintk("RPC: BAD SPKM ictoken preamble\n"); + dprintk("RPC: BAD SPKM ictoken preamble\n"); goto out; } @@ -217,25 +217,25 @@ spkm3_verify_mic_token(unsigned char **tokp, int *mic_hdrlen, unsigned char **ck /* token type */ if ((ptr[4] != 0x02) || (ptr[5] != 0x02)) { - dprintk("RPC: BAD asn1 SPKM3 token type\n"); + dprintk("RPC: BAD asn1 SPKM3 token type\n"); goto out; } /* only support SPKM_MIC_TOK */ if((ptr[6] != 0x01) || (ptr[7] != 0x01)) { - dprintk("RPC: ERROR unsupported SPKM3 token \n"); + dprintk("RPC: ERROR unsupported SPKM3 token \n"); goto out; } /* contextid */ if (ptr[8] != 0x03) { - dprintk("RPC: BAD SPKM3 asn1 context-id type\n"); + dprintk("RPC: BAD SPKM3 asn1 context-id type\n"); goto out; } ctxelen = ptr[9]; if (ctxelen > 17) { /* length includes asn1 zbit octet */ - dprintk("RPC: BAD SPKM3 contextid len %d\n", ctxelen); + dprintk("RPC: BAD SPKM3 contextid len %d\n", ctxelen); goto out; } @@ -251,7 +251,9 @@ spkm3_verify_mic_token(unsigned char **tokp, int *mic_hdrlen, unsigned char **ck */ if (*mic_hdrlen != 6 + ctxelen) { - dprintk("RPC: BAD SPKM_ MIC_TOK header len %d: we only support default int-alg (should be absent) and do not support snd-seq\n", *mic_hdrlen); + dprintk("RPC: BAD SPKM_ MIC_TOK header len %d: we only " + "support default int-alg (should be absent) " + "and do not support snd-seq\n", *mic_hdrlen); goto out; } /* checksum */ diff --git a/net/sunrpc/auth_gss/gss_spkm3_unseal.c b/net/sunrpc/auth_gss/gss_spkm3_unseal.c index e54581c..ac1ad6b 100644 --- a/net/sunrpc/auth_gss/gss_spkm3_unseal.c +++ b/net/sunrpc/auth_gss/gss_spkm3_unseal.c @@ -72,7 +72,7 @@ spkm3_read_token(struct spkm3_ctx *ctx, /* decode the token */ if (toktype != SPKM_MIC_TOK) { - dprintk("RPC: BAD SPKM3 token type: %d\n", toktype); + dprintk("RPC: BAD SPKM3 token type: %d\n", toktype); goto out; } @@ -80,7 +80,7 @@ spkm3_read_token(struct spkm3_ctx *ctx, goto out; if (*cksum++ != 0x03) { - dprintk("RPC: spkm3_read_token BAD checksum type\n"); + dprintk("RPC: spkm3_read_token BAD checksum type\n"); goto out; } md5elen = *cksum++; @@ -97,7 +97,8 @@ spkm3_read_token(struct spkm3_ctx *ctx, */ ret = GSS_S_DEFECTIVE_TOKEN; if (!g_OID_equal(&ctx->intg_alg, &hmac_md5_oid)) { - dprintk("RPC: gss_spkm3_seal: unsupported I-ALG algorithm\n"); + dprintk("RPC: gss_spkm3_seal: unsupported I-ALG " + "algorithm\n"); goto out; } @@ -113,7 +114,7 @@ spkm3_read_token(struct spkm3_ctx *ctx, ret = GSS_S_BAD_SIG; code = memcmp(md5cksum.data, wire_cksum.data, wire_cksum.len); if (code) { - dprintk("RPC: bad MIC checksum\n"); + dprintk("RPC: bad MIC checksum\n"); goto out; } diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c index 066c64a..8944cab 100644 --- a/net/sunrpc/auth_gss/svcauth_gss.c +++ b/net/sunrpc/auth_gss/svcauth_gss.c @@ -669,14 +669,14 @@ gss_verify_header(struct svc_rqst *rqstp, struct rsc *rsci, } if (gc->gc_seq > MAXSEQ) { - dprintk("RPC: svcauth_gss: discarding request with large sequence number %d\n", - gc->gc_seq); + dprintk("RPC: svcauth_gss: discarding request with " + "large sequence number %d\n", gc->gc_seq); *authp = rpcsec_gsserr_ctxproblem; return SVC_DENIED; } if (!gss_check_seq_num(rsci, gc->gc_seq)) { - dprintk("RPC: svcauth_gss: discarding request with old sequence number %d\n", - gc->gc_seq); + dprintk("RPC: svcauth_gss: discarding request with " + "old sequence number %d\n", gc->gc_seq); return SVC_DROP; } return SVC_OK; @@ -958,7 +958,8 @@ svcauth_gss_accept(struct svc_rqst *rqstp, __be32 *authp) __be32 *reject_stat = resv->iov_base + resv->iov_len; int ret; - dprintk("RPC: svcauth_gss: argv->iov_len = %zd\n",argv->iov_len); + dprintk("RPC: svcauth_gss: argv->iov_len = %zd\n", + argv->iov_len); *authp = rpc_autherr_badcred; if (!svcdata) -- cgit v0.10.2 From 46121cf7d85869bfe9588bac7ccf55aa0bc7f278 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Wed, 31 Jan 2007 12:14:08 -0500 Subject: SUNRPC: fix print format for tk_pid The tk_pid field is an unsigned short. The proper print format specifier for that type is %5u, not %4d. Also clean up some miscellaneous print formatting nits. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust diff --git a/net/sunrpc/auth.c b/net/sunrpc/auth.c index 993ff1a..5752f29 100644 --- a/net/sunrpc/auth.c +++ b/net/sunrpc/auth.c @@ -181,7 +181,7 @@ rpcauth_gc_credcache(struct rpc_auth *auth, struct hlist_head *free) struct rpc_cred *cred; int i; - dprintk("RPC: gc'ing RPC credentials for auth %p\n", auth); + dprintk("RPC: gc'ing RPC credentials for auth %p\n", auth); for (i = 0; i < RPC_CREDCACHE_NR; i++) { hlist_for_each_safe(pos, next, &cache->hashtable[i]) { cred = hlist_entry(pos, struct rpc_cred, cr_hash); @@ -267,7 +267,7 @@ rpcauth_lookupcred(struct rpc_auth *auth, int flags) }; struct rpc_cred *ret; - dprintk("RPC: looking up %s cred\n", + dprintk("RPC: looking up %s cred\n", auth->au_ops->au_name); get_group_info(acred.group_info); ret = auth->au_ops->lookup_cred(auth, &acred, flags); @@ -287,7 +287,7 @@ rpcauth_bindcred(struct rpc_task *task) struct rpc_cred *ret; int flags = 0; - dprintk("RPC: %4d looking up %s cred\n", + dprintk("RPC: %5u looking up %s cred\n", task->tk_pid, task->tk_auth->au_ops->au_name); get_group_info(acred.group_info); if (task->tk_flags & RPC_TASK_ROOTCREDS) @@ -304,8 +304,9 @@ rpcauth_bindcred(struct rpc_task *task) void rpcauth_holdcred(struct rpc_task *task) { - dprintk("RPC: %4d holding %s cred %p\n", - task->tk_pid, task->tk_auth->au_ops->au_name, task->tk_msg.rpc_cred); + dprintk("RPC: %5u holding %s cred %p\n", + task->tk_pid, task->tk_auth->au_ops->au_name, + task->tk_msg.rpc_cred); if (task->tk_msg.rpc_cred) get_rpccred(task->tk_msg.rpc_cred); } @@ -324,7 +325,7 @@ rpcauth_unbindcred(struct rpc_task *task) { struct rpc_cred *cred = task->tk_msg.rpc_cred; - dprintk("RPC: %4d releasing %s cred %p\n", + dprintk("RPC: %5u releasing %s cred %p\n", task->tk_pid, task->tk_auth->au_ops->au_name, cred); put_rpccred(cred); @@ -336,7 +337,7 @@ rpcauth_marshcred(struct rpc_task *task, __be32 *p) { struct rpc_cred *cred = task->tk_msg.rpc_cred; - dprintk("RPC: %4d marshaling %s cred %p\n", + dprintk("RPC: %5u marshaling %s cred %p\n", task->tk_pid, task->tk_auth->au_ops->au_name, cred); return cred->cr_ops->crmarshal(task, p); @@ -347,7 +348,7 @@ rpcauth_checkverf(struct rpc_task *task, __be32 *p) { struct rpc_cred *cred = task->tk_msg.rpc_cred; - dprintk("RPC: %4d validating %s cred %p\n", + dprintk("RPC: %5u validating %s cred %p\n", task->tk_pid, task->tk_auth->au_ops->au_name, cred); return cred->cr_ops->crvalidate(task, p); @@ -359,7 +360,7 @@ rpcauth_wrap_req(struct rpc_task *task, kxdrproc_t encode, void *rqstp, { struct rpc_cred *cred = task->tk_msg.rpc_cred; - dprintk("RPC: %4d using %s cred %p to wrap rpc data\n", + dprintk("RPC: %5u using %s cred %p to wrap rpc data\n", task->tk_pid, cred->cr_ops->cr_name, cred); if (cred->cr_ops->crwrap_req) return cred->cr_ops->crwrap_req(task, encode, rqstp, data, obj); @@ -373,7 +374,7 @@ rpcauth_unwrap_resp(struct rpc_task *task, kxdrproc_t decode, void *rqstp, { struct rpc_cred *cred = task->tk_msg.rpc_cred; - dprintk("RPC: %4d using %s cred %p to unwrap rpc data\n", + dprintk("RPC: %5u using %s cred %p to unwrap rpc data\n", task->tk_pid, cred->cr_ops->cr_name, cred); if (cred->cr_ops->crunwrap_resp) return cred->cr_ops->crunwrap_resp(task, decode, rqstp, @@ -388,7 +389,7 @@ rpcauth_refreshcred(struct rpc_task *task) struct rpc_cred *cred = task->tk_msg.rpc_cred; int err; - dprintk("RPC: %4d refreshing %s cred %p\n", + dprintk("RPC: %5u refreshing %s cred %p\n", task->tk_pid, task->tk_auth->au_ops->au_name, cred); err = cred->cr_ops->crrefresh(task); @@ -400,7 +401,7 @@ rpcauth_refreshcred(struct rpc_task *task) void rpcauth_invalcred(struct rpc_task *task) { - dprintk("RPC: %4d invalidating %s cred %p\n", + dprintk("RPC: %5u invalidating %s cred %p\n", task->tk_pid, task->tk_auth->au_ops->au_name, task->tk_msg.rpc_cred); spin_lock(&rpc_credcache_lock); if (task->tk_msg.rpc_cred) diff --git a/net/sunrpc/auth_unix.c b/net/sunrpc/auth_unix.c index f7f990c..4e7733a 100644 --- a/net/sunrpc/auth_unix.c +++ b/net/sunrpc/auth_unix.c @@ -39,7 +39,8 @@ static struct rpc_credops unix_credops; static struct rpc_auth * unx_create(struct rpc_clnt *clnt, rpc_authflavor_t flavor) { - dprintk("RPC: creating UNIX authenticator for client %p\n", clnt); + dprintk("RPC: creating UNIX authenticator for client %p\n", + clnt); if (atomic_inc_return(&unix_auth.au_count) == 0) unix_cred_cache.nextgc = jiffies + (unix_cred_cache.expire >> 1); return &unix_auth; @@ -48,7 +49,7 @@ unx_create(struct rpc_clnt *clnt, rpc_authflavor_t flavor) static void unx_destroy(struct rpc_auth *auth) { - dprintk("RPC: destroying UNIX authenticator %p\n", auth); + dprintk("RPC: destroying UNIX authenticator %p\n", auth); rpcauth_free_credcache(auth); } @@ -67,8 +68,8 @@ unx_create_cred(struct rpc_auth *auth, struct auth_cred *acred, int flags) struct unx_cred *cred; int i; - dprintk("RPC: allocating UNIX cred for uid %d gid %d\n", - acred->uid, acred->gid); + dprintk("RPC: allocating UNIX cred for uid %d gid %d\n", + acred->uid, acred->gid); if (!(cred = kmalloc(sizeof(*cred), GFP_KERNEL))) return ERR_PTR(-ENOMEM); diff --git a/net/sunrpc/cache.c b/net/sunrpc/cache.c index 1427449..9e72223 100644 --- a/net/sunrpc/cache.c +++ b/net/sunrpc/cache.c @@ -215,7 +215,8 @@ int cache_check(struct cache_detail *detail, if (rv == -EAGAIN) rv = -ENOENT; } else if (rv == -EAGAIN || age > refresh_age/2) { - dprintk("Want update, refage=%ld, age=%ld\n", refresh_age, age); + dprintk("RPC: Want update, refage=%ld, age=%ld\n", + refresh_age, age); if (!test_and_set_bit(CACHE_PENDING, &h->flags)) { switch (cache_make_upcall(detail, h)) { case -EINVAL: diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index e9d5f3c..393e70a 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -42,6 +42,10 @@ # define RPCDBG_FACILITY RPCDBG_CALL #endif +#define dprint_status(t) \ + dprintk("RPC: %5u %s (status %d)\n", t->tk_pid, \ + __FUNCTION__, t->tk_status) + static DECLARE_WAIT_QUEUE_HEAD(destroy_wait); @@ -106,8 +110,8 @@ static struct rpc_clnt * rpc_new_client(struct rpc_xprt *xprt, char *servname, s int err; int len; - dprintk("RPC: creating %s client for %s (xprt %p)\n", - program->name, servname, xprt); + dprintk("RPC: creating %s client for %s (xprt %p)\n", + program->name, servname, xprt); err = -EINVAL; if (!xprt) @@ -220,7 +224,7 @@ struct rpc_clnt *rpc_create(struct rpc_create_args *args) xprt->resvport = 0; dprintk("RPC: creating %s client for %s (xprt %p)\n", - args->program->name, args->servername, xprt); + args->program->name, args->servername, xprt); clnt = rpc_new_client(xprt, args->servername, args->program, args->version, args->authflavor); @@ -288,7 +292,7 @@ out_no_path: out_no_stats: kfree(new); out_no_clnt: - dprintk("RPC: %s returned error %d\n", __FUNCTION__, err); + dprintk("RPC: %s: returned error %d\n", __FUNCTION__, err); return ERR_PTR(err); } @@ -301,7 +305,7 @@ out_no_clnt: int rpc_shutdown_client(struct rpc_clnt *clnt) { - dprintk("RPC: shutting down %s client for %s, tasks=%d\n", + dprintk("RPC: shutting down %s client for %s, tasks=%d\n", clnt->cl_protname, clnt->cl_server, atomic_read(&clnt->cl_users)); @@ -336,7 +340,7 @@ rpc_destroy_client(struct rpc_clnt *clnt) return 1; BUG_ON(atomic_read(&clnt->cl_users) != 0); - dprintk("RPC: destroying %s client for %s\n", + dprintk("RPC: destroying %s client for %s\n", clnt->cl_protname, clnt->cl_server); if (clnt->cl_auth) { rpcauth_destroy(clnt->cl_auth); @@ -366,8 +370,8 @@ out_free: void rpc_release_client(struct rpc_clnt *clnt) { - dprintk("RPC: rpc_release_client(%p, %d)\n", - clnt, atomic_read(&clnt->cl_users)); + dprintk("RPC: rpc_release_client(%p, %d)\n", + clnt, atomic_read(&clnt->cl_users)); if (!atomic_dec_and_test(&clnt->cl_users)) return; @@ -654,9 +658,10 @@ call_start(struct rpc_task *task) { struct rpc_clnt *clnt = task->tk_client; - dprintk("RPC: %4d call_start %s%d proc %d (%s)\n", task->tk_pid, - clnt->cl_protname, clnt->cl_vers, task->tk_msg.rpc_proc->p_proc, - (RPC_IS_ASYNC(task) ? "async" : "sync")); + dprintk("RPC: %5u call_start %s%d proc %d (%s)\n", task->tk_pid, + clnt->cl_protname, clnt->cl_vers, + task->tk_msg.rpc_proc->p_proc, + (RPC_IS_ASYNC(task) ? "async" : "sync")); /* Increment call count */ task->tk_msg.rpc_proc->p_count++; @@ -670,7 +675,7 @@ call_start(struct rpc_task *task) static void call_reserve(struct rpc_task *task) { - dprintk("RPC: %4d call_reserve\n", task->tk_pid); + dprint_status(task); if (!rpcauth_uptodatecred(task)) { task->tk_action = call_refresh; @@ -690,8 +695,7 @@ call_reserveresult(struct rpc_task *task) { int status = task->tk_status; - dprintk("RPC: %4d call_reserveresult (status %d)\n", - task->tk_pid, task->tk_status); + dprint_status(task); /* * After a call to xprt_reserve(), we must have either @@ -745,8 +749,8 @@ call_allocate(struct rpc_task *task) struct rpc_xprt *xprt = task->tk_xprt; unsigned int bufsiz; - dprintk("RPC: %4d call_allocate (status %d)\n", - task->tk_pid, task->tk_status); + dprint_status(task); + task->tk_action = call_bind; if (req->rq_buffer) return; @@ -757,7 +761,8 @@ call_allocate(struct rpc_task *task) if (xprt->ops->buf_alloc(task, bufsiz << 1) != NULL) return; - printk(KERN_INFO "RPC: buffer allocation failed for task %p\n", task); + + dprintk("RPC: %5u rpc_buffer allocation failed\n", task->tk_pid); if (RPC_IS_ASYNC(task) || !signalled()) { xprt_release(task); @@ -794,8 +799,7 @@ call_encode(struct rpc_task *task) kxdrproc_t encode; __be32 *p; - dprintk("RPC: %4d call_encode (status %d)\n", - task->tk_pid, task->tk_status); + dprint_status(task); /* Default buffer setup */ bufsiz = req->rq_bufsize >> 1; @@ -841,8 +845,7 @@ call_bind(struct rpc_task *task) { struct rpc_xprt *xprt = task->tk_xprt; - dprintk("RPC: %4d call_bind (status %d)\n", - task->tk_pid, task->tk_status); + dprint_status(task); task->tk_action = call_connect; if (!xprt_bound(xprt)) { @@ -861,8 +864,7 @@ call_bind_status(struct rpc_task *task) int status = -EACCES; if (task->tk_status >= 0) { - dprintk("RPC: %4d call_bind_status (status %d)\n", - task->tk_pid, task->tk_status); + dprint_status(task); task->tk_status = 0; task->tk_action = call_connect; return; @@ -870,24 +872,24 @@ call_bind_status(struct rpc_task *task) switch (task->tk_status) { case -EACCES: - dprintk("RPC: %4d remote rpcbind: RPC program/version unavailable\n", - task->tk_pid); + dprintk("RPC: %5u remote rpcbind: RPC program/version " + "unavailable\n", task->tk_pid); rpc_delay(task, 3*HZ); goto retry_timeout; case -ETIMEDOUT: - dprintk("RPC: %4d rpcbind request timed out\n", + dprintk("RPC: %5u rpcbind request timed out\n", task->tk_pid); goto retry_timeout; case -EPFNOSUPPORT: - dprintk("RPC: %4d remote rpcbind service unavailable\n", + dprintk("RPC: %5u remote rpcbind service unavailable\n", task->tk_pid); break; case -EPROTONOSUPPORT: - dprintk("RPC: %4d remote rpcbind version 2 unavailable\n", + dprintk("RPC: %5u remote rpcbind version 2 unavailable\n", task->tk_pid); break; default: - dprintk("RPC: %4d unrecognized rpcbind error (%d)\n", + dprintk("RPC: %5u unrecognized rpcbind error (%d)\n", task->tk_pid, -task->tk_status); status = -EIO; } @@ -907,7 +909,7 @@ call_connect(struct rpc_task *task) { struct rpc_xprt *xprt = task->tk_xprt; - dprintk("RPC: %4d call_connect xprt %p %s connected\n", + dprintk("RPC: %5u call_connect xprt %p %s connected\n", task->tk_pid, xprt, (xprt_connected(xprt) ? "is" : "is not")); @@ -929,8 +931,7 @@ call_connect_status(struct rpc_task *task) struct rpc_clnt *clnt = task->tk_client; int status = task->tk_status; - dprintk("RPC: %5u call_connect_status (status %d)\n", - task->tk_pid, task->tk_status); + dprint_status(task); task->tk_status = 0; if (status >= 0) { @@ -962,8 +963,7 @@ call_connect_status(struct rpc_task *task) static void call_transmit(struct rpc_task *task) { - dprintk("RPC: %4d call_transmit (status %d)\n", - task->tk_pid, task->tk_status); + dprint_status(task); task->tk_action = call_status; if (task->tk_status < 0) @@ -1024,8 +1024,7 @@ call_status(struct rpc_task *task) if (req->rq_received > 0 && !req->rq_bytes_sent) task->tk_status = req->rq_received; - dprintk("RPC: %4d call_status (status %d)\n", - task->tk_pid, task->tk_status); + dprint_status(task); status = task->tk_status; if (status >= 0) { @@ -1076,11 +1075,11 @@ call_timeout(struct rpc_task *task) struct rpc_clnt *clnt = task->tk_client; if (xprt_adjust_timeout(task->tk_rqstp) == 0) { - dprintk("RPC: %4d call_timeout (minor)\n", task->tk_pid); + dprintk("RPC: %5u call_timeout (minor)\n", task->tk_pid); goto retry; } - dprintk("RPC: %4d call_timeout (major)\n", task->tk_pid); + dprintk("RPC: %5u call_timeout (major)\n", task->tk_pid); task->tk_timeouts++; if (RPC_IS_SOFT(task)) { @@ -1114,8 +1113,8 @@ call_decode(struct rpc_task *task) kxdrproc_t decode = task->tk_msg.rpc_proc->p_decode; __be32 *p; - dprintk("RPC: %4d call_decode (status %d)\n", - task->tk_pid, task->tk_status); + dprintk("RPC: %5u call_decode (status %d)\n", + task->tk_pid, task->tk_status); if (task->tk_flags & RPC_CALL_MAJORSEEN) { printk(KERN_NOTICE "%s: server %s OK\n", @@ -1129,8 +1128,8 @@ call_decode(struct rpc_task *task) clnt->cl_stats->rpcretrans++; goto out_retry; } - dprintk("%s: too small RPC reply size (%d bytes)\n", - clnt->cl_protname, task->tk_status); + dprintk("RPC: %s: too small RPC reply size (%d bytes)\n", + clnt->cl_protname, task->tk_status); task->tk_action = call_timeout; goto out_retry; } @@ -1162,8 +1161,8 @@ call_decode(struct rpc_task *task) task->tk_msg.rpc_resp); unlock_kernel(); } - dprintk("RPC: %4d call_decode result %d\n", task->tk_pid, - task->tk_status); + dprintk("RPC: %5u call_decode result %d\n", task->tk_pid, + task->tk_status); return; out_retry: req->rq_received = req->rq_private_buf.len = 0; @@ -1176,7 +1175,7 @@ out_retry: static void call_refresh(struct rpc_task *task) { - dprintk("RPC: %4d call_refresh\n", task->tk_pid); + dprint_status(task); xprt_release(task); /* Must do to obtain new XID */ task->tk_action = call_refreshresult; @@ -1192,8 +1191,8 @@ static void call_refreshresult(struct rpc_task *task) { int status = task->tk_status; - dprintk("RPC: %4d call_refreshresult (status %d)\n", - task->tk_pid, task->tk_status); + + dprint_status(task); task->tk_status = 0; task->tk_action = call_reserve; @@ -1271,11 +1270,15 @@ call_verify(struct rpc_task *task) case RPC_AUTH_ERROR: break; case RPC_MISMATCH: - dprintk("%s: RPC call version mismatch!\n", __FUNCTION__); + dprintk("RPC: %5u %s: RPC call version " + "mismatch!\n", + task->tk_pid, __FUNCTION__); error = -EPROTONOSUPPORT; goto out_err; default: - dprintk("%s: RPC call rejected, unknown error: %x\n", __FUNCTION__, n); + dprintk("RPC: %5u %s: RPC call rejected, " + "unknown error: %x\n", + task->tk_pid, __FUNCTION__, n); goto out_eio; } if (--len < 0) @@ -1288,8 +1291,8 @@ call_verify(struct rpc_task *task) if (!task->tk_cred_retry) break; task->tk_cred_retry--; - dprintk("RPC: %4d call_verify: retry stale creds\n", - task->tk_pid); + dprintk("RPC: %5u %s: retry stale creds\n", + task->tk_pid, __FUNCTION__); rpcauth_invalcred(task); task->tk_action = call_refresh; goto out_retry; @@ -1299,8 +1302,8 @@ call_verify(struct rpc_task *task) if (!task->tk_garb_retry) break; task->tk_garb_retry--; - dprintk("RPC: %4d call_verify: retry garbled creds\n", - task->tk_pid); + dprintk("RPC: %5u %s: retry garbled creds\n", + task->tk_pid, __FUNCTION__); task->tk_action = call_bind; goto out_retry; case RPC_AUTH_TOOWEAK: @@ -1311,8 +1314,8 @@ call_verify(struct rpc_task *task) printk(KERN_WARNING "call_verify: unknown auth error: %x\n", n); error = -EIO; } - dprintk("RPC: %4d call_verify: call rejected %d\n", - task->tk_pid, n); + dprintk("RPC: %5u %s: call rejected %d\n", + task->tk_pid, __FUNCTION__, n); goto out_err; } if (!(p = rpcauth_checkverf(task, p))) { @@ -1326,20 +1329,24 @@ call_verify(struct rpc_task *task) case RPC_SUCCESS: return p; case RPC_PROG_UNAVAIL: - dprintk("RPC: call_verify: program %u is unsupported by server %s\n", + dprintk("RPC: %5u %s: program %u is unsupported by server %s\n", + task->tk_pid, __FUNCTION__, (unsigned int)task->tk_client->cl_prog, task->tk_client->cl_server); error = -EPFNOSUPPORT; goto out_err; case RPC_PROG_MISMATCH: - dprintk("RPC: call_verify: program %u, version %u unsupported by server %s\n", + dprintk("RPC: %5u %s: program %u, version %u unsupported by " + "server %s\n", task->tk_pid, __FUNCTION__, (unsigned int)task->tk_client->cl_prog, (unsigned int)task->tk_client->cl_vers, task->tk_client->cl_server); error = -EPROTONOSUPPORT; goto out_err; case RPC_PROC_UNAVAIL: - dprintk("RPC: call_verify: proc %p unsupported by program %u, version %u on server %s\n", + dprintk("RPC: %5u %s: proc %p unsupported by program %u, " + "version %u on server %s\n", + task->tk_pid, __FUNCTION__, task->tk_msg.rpc_proc, task->tk_client->cl_prog, task->tk_client->cl_vers, @@ -1347,7 +1354,8 @@ call_verify(struct rpc_task *task) error = -EOPNOTSUPP; goto out_err; case RPC_GARBAGE_ARGS: - dprintk("RPC: %4d %s: server saw garbage\n", task->tk_pid, __FUNCTION__); + dprintk("RPC: %5u %s: server saw garbage\n", + task->tk_pid, __FUNCTION__); break; /* retry */ default: printk(KERN_WARNING "call_verify: server accept status: %x\n", n); @@ -1358,7 +1366,8 @@ out_garbage: task->tk_client->cl_stats->rpcgarbage++; if (task->tk_garb_retry) { task->tk_garb_retry--; - dprintk("RPC %s: retrying %4d\n", __FUNCTION__, task->tk_pid); + dprintk("RPC: %5u %s: retrying\n", + task->tk_pid, __FUNCTION__); task->tk_action = call_bind; out_retry: return ERR_PTR(-EAGAIN); diff --git a/net/sunrpc/pmap_clnt.c b/net/sunrpc/pmap_clnt.c index 76e59e9..12ab4ec 100644 --- a/net/sunrpc/pmap_clnt.c +++ b/net/sunrpc/pmap_clnt.c @@ -97,7 +97,7 @@ void rpc_getport(struct rpc_task *task) struct rpc_task *child; int status; - dprintk("RPC: %4d rpc_getport(%s, %u, %u, %d)\n", + dprintk("RPC: %5u rpc_getport(%s, %u, %u, %d)\n", task->tk_pid, clnt->cl_server, clnt->cl_prog, clnt->cl_vers, xprt->prot); @@ -178,7 +178,7 @@ int rpc_getport_external(struct sockaddr_in *sin, __u32 prog, __u32 vers, int pr char hostname[32]; int status; - dprintk("RPC: rpc_getport_external(%u.%u.%u.%u, %u, %u, %d)\n", + dprintk("RPC: rpc_getport_external(%u.%u.%u.%u, %u, %u, %d)\n", NIPQUAD(sin->sin_addr.s_addr), prog, vers, prot); sprintf(hostname, "%u.%u.%u.%u", NIPQUAD(sin->sin_addr.s_addr)); @@ -221,7 +221,7 @@ static void pmap_getport_done(struct rpc_task *child, void *data) status = 0; } - dprintk("RPC: %4d pmap_getport_done(status %d, port %u)\n", + dprintk("RPC: %5u pmap_getport_done(status %d, port %u)\n", child->tk_pid, status, map->pm_port); pmap_wake_portmap_waiters(xprt, status); @@ -257,13 +257,14 @@ int rpc_register(u32 prog, u32 vers, int prot, unsigned short port, int *okay) struct rpc_clnt *pmap_clnt; int error = 0; - dprintk("RPC: registering (%u, %u, %d, %u) with portmapper.\n", + dprintk("RPC: registering (%u, %u, %d, %u) with portmapper.\n", prog, vers, prot, port); pmap_clnt = pmap_create("localhost", &sin, IPPROTO_UDP, 1); if (IS_ERR(pmap_clnt)) { error = PTR_ERR(pmap_clnt); - dprintk("RPC: couldn't create pmap client. Error = %d\n", error); + dprintk("RPC: couldn't create pmap client. Error = %d\n", + error); return error; } @@ -274,7 +275,7 @@ int rpc_register(u32 prog, u32 vers, int prot, unsigned short port, int *okay) "RPC: failed to contact portmap (errno %d).\n", error); } - dprintk("RPC: registration status %d/%d\n", error, *okay); + dprintk("RPC: registration status %d/%d\n", error, *okay); /* Client deleted automatically because cl_oneshot == 1 */ return error; @@ -305,8 +306,9 @@ static struct rpc_clnt *pmap_create(char *hostname, struct sockaddr_in *srvaddr, */ static int xdr_encode_mapping(struct rpc_rqst *req, __be32 *p, struct portmap_args *map) { - dprintk("RPC: xdr_encode_mapping(%u, %u, %u, %u)\n", - map->pm_prog, map->pm_vers, map->pm_prot, map->pm_port); + dprintk("RPC: xdr_encode_mapping(%u, %u, %u, %u)\n", + map->pm_prog, map->pm_vers, + map->pm_prot, map->pm_port); *p++ = htonl(map->pm_prog); *p++ = htonl(map->pm_vers); *p++ = htonl(map->pm_prot); diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c index 13ab0c6..ca56b8e 100644 --- a/net/sunrpc/sched.c +++ b/net/sunrpc/sched.c @@ -74,7 +74,7 @@ static DEFINE_SPINLOCK(rpc_sched_lock); static inline void __rpc_disable_timer(struct rpc_task *task) { - dprintk("RPC: %4d disabling timer\n", task->tk_pid); + dprintk("RPC: %5u disabling timer\n", task->tk_pid); task->tk_timeout_fn = NULL; task->tk_timeout = 0; } @@ -93,7 +93,7 @@ static void rpc_run_timer(struct rpc_task *task) callback = task->tk_timeout_fn; task->tk_timeout_fn = NULL; if (callback && RPC_IS_QUEUED(task)) { - dprintk("RPC: %4d running timer\n", task->tk_pid); + dprintk("RPC: %5u running timer\n", task->tk_pid); callback(task); } smp_mb__before_clear_bit(); @@ -110,7 +110,7 @@ __rpc_add_timer(struct rpc_task *task, rpc_action timer) if (!task->tk_timeout) return; - dprintk("RPC: %4d setting alarm for %lu ms\n", + dprintk("RPC: %5u setting alarm for %lu ms\n", task->tk_pid, task->tk_timeout * 1000 / HZ); if (timer) @@ -132,7 +132,7 @@ rpc_delete_timer(struct rpc_task *task) return; if (test_and_clear_bit(RPC_TASK_HAS_TIMER, &task->tk_runstate)) { del_singleshot_timer_sync(&task->tk_timer); - dprintk("RPC: %4d deleting timer\n", task->tk_pid); + dprintk("RPC: %5u deleting timer\n", task->tk_pid); } } @@ -179,8 +179,8 @@ static void __rpc_add_wait_queue(struct rpc_wait_queue *queue, struct rpc_task * queue->qlen++; rpc_set_queued(task); - dprintk("RPC: %4d added to queue %p \"%s\"\n", - task->tk_pid, queue, rpc_qname(queue)); + dprintk("RPC: %5u added to queue %p \"%s\"\n", + task->tk_pid, queue, rpc_qname(queue)); } /* @@ -212,8 +212,8 @@ static void __rpc_remove_wait_queue(struct rpc_task *task) else list_del(&task->u.tk_wait.list); queue->qlen--; - dprintk("RPC: %4d removed from queue %p \"%s\"\n", - task->tk_pid, queue, rpc_qname(queue)); + dprintk("RPC: %5u removed from queue %p \"%s\"\n", + task->tk_pid, queue, rpc_qname(queue)); } static inline void rpc_set_waitqueue_priority(struct rpc_wait_queue *queue, int priority) @@ -344,8 +344,8 @@ static void rpc_make_runnable(struct rpc_task *task) static void __rpc_sleep_on(struct rpc_wait_queue *q, struct rpc_task *task, rpc_action action, rpc_action timer) { - dprintk("RPC: %4d sleep_on(queue \"%s\" time %ld)\n", task->tk_pid, - rpc_qname(q), jiffies); + dprintk("RPC: %5u sleep_on(queue \"%s\" time %lu)\n", + task->tk_pid, rpc_qname(q), jiffies); if (!RPC_IS_ASYNC(task) && !RPC_IS_ACTIVATED(task)) { printk(KERN_ERR "RPC: Inactive synchronous task put to sleep!\n"); @@ -381,7 +381,8 @@ void rpc_sleep_on(struct rpc_wait_queue *q, struct rpc_task *task, */ static void __rpc_do_wake_up_task(struct rpc_task *task) { - dprintk("RPC: %4d __rpc_wake_up_task (now %ld)\n", task->tk_pid, jiffies); + dprintk("RPC: %5u __rpc_wake_up_task (now %lu)\n", + task->tk_pid, jiffies); #ifdef RPC_DEBUG BUG_ON(task->tk_magic != RPC_TASK_MAGIC_ID); @@ -397,7 +398,7 @@ static void __rpc_do_wake_up_task(struct rpc_task *task) rpc_make_runnable(task); - dprintk("RPC: __rpc_wake_up_task done\n"); + dprintk("RPC: __rpc_wake_up_task done\n"); } /* @@ -418,7 +419,7 @@ static void __rpc_wake_up_task(struct rpc_task *task) static void __rpc_default_timer(struct rpc_task *task) { - dprintk("RPC: %d timeout (default timer)\n", task->tk_pid); + dprintk("RPC: %5u timeout (default timer)\n", task->tk_pid); task->tk_status = -ETIMEDOUT; rpc_wake_up_task(task); } @@ -502,7 +503,8 @@ struct rpc_task * rpc_wake_up_next(struct rpc_wait_queue *queue) { struct rpc_task *task = NULL; - dprintk("RPC: wake_up_next(%p \"%s\")\n", queue, rpc_qname(queue)); + dprintk("RPC: wake_up_next(%p \"%s\")\n", + queue, rpc_qname(queue)); rcu_read_lock_bh(); spin_lock(&queue->lock); if (RPC_IS_PRIORITY(queue)) @@ -629,8 +631,8 @@ static void __rpc_execute(struct rpc_task *task) { int status = 0; - dprintk("RPC: %4d rpc_execute flgs %x\n", - task->tk_pid, task->tk_flags); + dprintk("RPC: %5u __rpc_execute flags=0x%x\n", + task->tk_pid, task->tk_flags); BUG_ON(RPC_IS_QUEUED(task)); @@ -686,7 +688,7 @@ static void __rpc_execute(struct rpc_task *task) } /* sync task: sleep here */ - dprintk("RPC: %4d sync task going to sleep\n", task->tk_pid); + dprintk("RPC: %5u sync task going to sleep\n", task->tk_pid); /* Note: Caller should be using rpc_clnt_sigmask() */ status = out_of_line_wait_on_bit(&task->tk_runstate, RPC_TASK_QUEUED, rpc_wait_bit_interruptible, @@ -698,16 +700,17 @@ static void __rpc_execute(struct rpc_task *task) * clean up after sleeping on some queue, we don't * break the loop here, but go around once more. */ - dprintk("RPC: %4d got signal\n", task->tk_pid); + dprintk("RPC: %5u got signal\n", task->tk_pid); task->tk_flags |= RPC_TASK_KILLED; rpc_exit(task, -ERESTARTSYS); rpc_wake_up_task(task); } rpc_set_running(task); - dprintk("RPC: %4d sync task resuming\n", task->tk_pid); + dprintk("RPC: %5u sync task resuming\n", task->tk_pid); } - dprintk("RPC: %4d, return %d, status %d\n", task->tk_pid, status, task->tk_status); + dprintk("RPC: %5u return %d, status %d\n", task->tk_pid, status, + task->tk_status); /* Release all resources associated with the task */ rpc_release_task(task); } @@ -824,7 +827,7 @@ void rpc_init_task(struct rpc_task *task, struct rpc_clnt *clnt, int flags, cons /* starting timestamp */ task->tk_start = jiffies; - dprintk("RPC: %4d new task procpid %d\n", task->tk_pid, + dprintk("RPC: new task initialized, procpid %u\n", current->pid); } @@ -837,7 +840,7 @@ rpc_alloc_task(void) static void rpc_free_task(struct rcu_head *rcu) { struct rpc_task *task = container_of(rcu, struct rpc_task, u.tk_rcu); - dprintk("RPC: %4d freeing task\n", task->tk_pid); + dprintk("RPC: %5u freeing task\n", task->tk_pid); mempool_free(task, rpc_task_mempool); } @@ -856,7 +859,7 @@ struct rpc_task *rpc_new_task(struct rpc_clnt *clnt, int flags, const struct rpc rpc_init_task(task, clnt, flags, tk_ops, calldata); - dprintk("RPC: %4d allocated task\n", task->tk_pid); + dprintk("RPC: allocated task %p\n", task); task->tk_flags |= RPC_TASK_DYNAMIC; out: return task; @@ -900,7 +903,7 @@ static void rpc_release_task(struct rpc_task *task) #ifdef RPC_DEBUG BUG_ON(task->tk_magic != RPC_TASK_MAGIC_ID); #endif - dprintk("RPC: %4d release task\n", task->tk_pid); + dprintk("RPC: %5u release task\n", task->tk_pid); /* Remove from global task list */ spin_lock(&rpc_sched_lock); @@ -953,7 +956,7 @@ void rpc_killall_tasks(struct rpc_clnt *clnt) struct rpc_task *rovr; struct list_head *le; - dprintk("RPC: killing all tasks for client %p\n", clnt); + dprintk("RPC: killing all tasks for client %p\n", clnt); /* * Spin lock all_tasks to prevent changes... @@ -982,7 +985,8 @@ static void rpciod_killall(void) rpc_killall_tasks(NULL); flush_workqueue(rpciod_workqueue); if (!list_empty(&all_tasks)) { - dprintk("rpciod_killall: waiting for tasks to exit\n"); + dprintk("RPC: rpciod_killall: waiting for tasks " + "to exit\n"); yield(); } } @@ -1002,7 +1006,7 @@ rpciod_up(void) int error = 0; mutex_lock(&rpciod_mutex); - dprintk("rpciod_up: users %d\n", rpciod_users); + dprintk("RPC: rpciod_up: users %u\n", rpciod_users); rpciod_users++; if (rpciod_workqueue) goto out; @@ -1010,7 +1014,7 @@ rpciod_up(void) * If there's no pid, we should be the first user. */ if (rpciod_users > 1) - printk(KERN_WARNING "rpciod_up: no workqueue, %d users??\n", rpciod_users); + printk(KERN_WARNING "rpciod_up: no workqueue, %u users??\n", rpciod_users); /* * Create the rpciod thread and wait for it to start. */ @@ -1032,7 +1036,7 @@ void rpciod_down(void) { mutex_lock(&rpciod_mutex); - dprintk("rpciod_down sema %d\n", rpciod_users); + dprintk("RPC: rpciod_down sema %u\n", rpciod_users); if (rpciod_users) { if (--rpciod_users) goto out; @@ -1040,7 +1044,7 @@ rpciod_down(void) printk(KERN_WARNING "rpciod_down: no users??\n"); if (!rpciod_workqueue) { - dprintk("rpciod_down: Nothing to do!\n"); + dprintk("RPC: rpciod_down: Nothing to do!\n"); goto out; } rpciod_killall(); @@ -1070,7 +1074,7 @@ void rpc_show_tasks(void) if (RPC_IS_QUEUED(t)) rpc_waitq = rpc_qname(t->u.tk_wait.rpc_waitq); - printk("%05d %04d %04x %06d %8p %6d %8p %08ld %8s %8p %8p\n", + printk("%5u %04d %04x %6d %8p %6d %8p %8ld %8s %8p %8p\n", t->tk_pid, (t->tk_msg.rpc_proc ? t->tk_msg.rpc_proc->p_proc : -1), t->tk_flags, t->tk_status, diff --git a/net/sunrpc/stats.c b/net/sunrpc/stats.c index bd98124..d19cd9e 100644 --- a/net/sunrpc/stats.c +++ b/net/sunrpc/stats.c @@ -226,7 +226,7 @@ do_register(const char *name, void *data, const struct file_operations *fops) struct proc_dir_entry *ent; rpc_proc_init(); - dprintk("RPC: registering /proc/net/rpc/%s\n", name); + dprintk("RPC: registering /proc/net/rpc/%s\n", name); ent = create_proc_entry(name, 0, proc_net_rpc); if (ent) { @@ -263,7 +263,7 @@ svc_proc_unregister(const char *name) void rpc_proc_init(void) { - dprintk("RPC: registering /proc/net/rpc\n"); + dprintk("RPC: registering /proc/net/rpc\n"); if (!proc_net_rpc) { struct proc_dir_entry *ent; ent = proc_mkdir("rpc", proc_net); @@ -277,7 +277,7 @@ rpc_proc_init(void) void rpc_proc_exit(void) { - dprintk("RPC: unregistering /proc/net/rpc\n"); + dprintk("RPC: unregistering /proc/net/rpc\n"); if (proc_net_rpc) { proc_net_rpc = NULL; remove_proc_entry("net/rpc", NULL); diff --git a/net/sunrpc/svc.c b/net/sunrpc/svc.c index 4c16112..b0fb640 100644 --- a/net/sunrpc/svc.c +++ b/net/sunrpc/svc.c @@ -317,7 +317,7 @@ __svc_create(struct svc_program *prog, unsigned int bufsize, int npools, for (i = 0; i < serv->sv_nrpools; i++) { struct svc_pool *pool = &serv->sv_pools[i]; - dprintk("initialising pool %u for %s\n", + dprintk("svc: initialising pool %u for %s\n", i, serv->sv_name); pool->sp_id = i; @@ -368,7 +368,7 @@ svc_destroy(struct svc_serv *serv) { struct svc_sock *svsk; - dprintk("RPC: svc_destroy(%s, %d)\n", + dprintk("svc: svc_destroy(%s, %d)\n", serv->sv_program->pg_name, serv->sv_nrthreads); @@ -654,7 +654,7 @@ svc_register(struct svc_serv *serv, int proto, unsigned short port) if (progp->pg_vers[i] == NULL) continue; - dprintk("RPC: svc_register(%s, %s, %d, %d)%s\n", + dprintk("svc: svc_register(%s, %s, %d, %d)%s\n", progp->pg_name, proto == IPPROTO_UDP? "udp" : "tcp", port, diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index 7a3999f..cf59f7d 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -108,7 +108,7 @@ int xprt_reserve_xprt(struct rpc_task *task) return 1; out_sleep: - dprintk("RPC: %4d failed to lock transport %p\n", + dprintk("RPC: %5u failed to lock transport %p\n", task->tk_pid, xprt); task->tk_timeout = 0; task->tk_status = -EAGAIN; @@ -158,7 +158,7 @@ int xprt_reserve_xprt_cong(struct rpc_task *task) } xprt_clear_locked(xprt); out_sleep: - dprintk("RPC: %4d failed to lock transport %p\n", task->tk_pid, xprt); + dprintk("RPC: %5u failed to lock transport %p\n", task->tk_pid, xprt); task->tk_timeout = 0; task->tk_status = -EAGAIN; if (req && req->rq_ntrans) @@ -281,7 +281,7 @@ __xprt_get_cong(struct rpc_xprt *xprt, struct rpc_task *task) if (req->rq_cong) return 1; - dprintk("RPC: %4d xprt_cwnd_limited cong = %ld cwnd = %ld\n", + dprintk("RPC: %5u xprt_cwnd_limited cong = %lu cwnd = %lu\n", task->tk_pid, xprt->cong, xprt->cwnd); if (RPCXPRT_CONGESTED(xprt)) return 0; @@ -340,7 +340,7 @@ void xprt_adjust_cwnd(struct rpc_task *task, int result) if (cwnd < RPC_CWNDSCALE) cwnd = RPC_CWNDSCALE; } - dprintk("RPC: cong %ld, cwnd was %ld, now %ld\n", + dprintk("RPC: cong %ld, cwnd was %ld, now %ld\n", xprt->cong, xprt->cwnd, cwnd); xprt->cwnd = cwnd; __xprt_put_cong(xprt, req); @@ -387,8 +387,8 @@ void xprt_write_space(struct rpc_xprt *xprt) spin_lock_bh(&xprt->transport_lock); if (xprt->snd_task) { - dprintk("RPC: write space: waking waiting task on xprt %p\n", - xprt); + dprintk("RPC: write space: waking waiting task on " + "xprt %p\n", xprt); rpc_wake_up_task(xprt->snd_task); } spin_unlock_bh(&xprt->transport_lock); @@ -494,7 +494,7 @@ static void xprt_autoclose(struct work_struct *work) */ void xprt_disconnect(struct rpc_xprt *xprt) { - dprintk("RPC: disconnected transport %p\n", xprt); + dprintk("RPC: disconnected transport %p\n", xprt); spin_lock_bh(&xprt->transport_lock); xprt_clear_connected(xprt); xprt_wake_pending_tasks(xprt, -ENOTCONN); @@ -530,7 +530,7 @@ void xprt_connect(struct rpc_task *task) { struct rpc_xprt *xprt = task->tk_xprt; - dprintk("RPC: %4d xprt_connect xprt %p %s connected\n", task->tk_pid, + dprintk("RPC: %5u xprt_connect xprt %p %s connected\n", task->tk_pid, xprt, (xprt_connected(xprt) ? "is" : "is not")); if (!xprt_bound(xprt)) { @@ -560,7 +560,7 @@ static void xprt_connect_status(struct rpc_task *task) if (task->tk_status >= 0) { xprt->stat.connect_count++; xprt->stat.connect_time += (long)jiffies - xprt->stat.connect_start; - dprintk("RPC: %4d xprt_connect_status: connection established\n", + dprintk("RPC: %5u xprt_connect_status: connection established\n", task->tk_pid); return; } @@ -568,20 +568,22 @@ static void xprt_connect_status(struct rpc_task *task) switch (task->tk_status) { case -ECONNREFUSED: case -ECONNRESET: - dprintk("RPC: %4d xprt_connect_status: server %s refused connection\n", - task->tk_pid, task->tk_client->cl_server); + dprintk("RPC: %5u xprt_connect_status: server %s refused " + "connection\n", task->tk_pid, + task->tk_client->cl_server); break; case -ENOTCONN: - dprintk("RPC: %4d xprt_connect_status: connection broken\n", + dprintk("RPC: %5u xprt_connect_status: connection broken\n", task->tk_pid); break; case -ETIMEDOUT: - dprintk("RPC: %4d xprt_connect_status: connect attempt timed out\n", - task->tk_pid); + dprintk("RPC: %5u xprt_connect_status: connect attempt timed " + "out\n", task->tk_pid); break; default: - dprintk("RPC: %4d xprt_connect_status: error %d connecting to server %s\n", - task->tk_pid, -task->tk_status, task->tk_client->cl_server); + dprintk("RPC: %5u xprt_connect_status: error %d connecting to " + "server %s\n", task->tk_pid, -task->tk_status, + task->tk_client->cl_server); xprt_release_write(xprt, task); task->tk_status = -EIO; } @@ -602,6 +604,9 @@ struct rpc_rqst *xprt_lookup_rqst(struct rpc_xprt *xprt, __be32 xid) if (entry->rq_xid == xid) return entry; } + + dprintk("RPC: xprt_lookup_rqst did not find xid %08x\n", + ntohl(xid)); xprt->stat.bad_xids++; return NULL; } @@ -654,7 +659,7 @@ static void xprt_timer(struct rpc_task *task) struct rpc_rqst *req = task->tk_rqstp; struct rpc_xprt *xprt = req->rq_xprt; - dprintk("RPC: %4d xprt_timer\n", task->tk_pid); + dprintk("RPC: %5u xprt_timer\n", task->tk_pid); spin_lock(&xprt->transport_lock); if (!req->rq_received) { @@ -678,7 +683,7 @@ int xprt_prepare_transmit(struct rpc_task *task) struct rpc_xprt *xprt = req->rq_xprt; int err = 0; - dprintk("RPC: %4d xprt_prepare_transmit\n", task->tk_pid); + dprintk("RPC: %5u xprt_prepare_transmit\n", task->tk_pid); spin_lock_bh(&xprt->transport_lock); if (req->rq_received && !req->rq_bytes_sent) { @@ -716,7 +721,7 @@ void xprt_transmit(struct rpc_task *task) struct rpc_xprt *xprt = req->rq_xprt; int status; - dprintk("RPC: %4d xprt_transmit(%u)\n", task->tk_pid, req->rq_slen); + dprintk("RPC: %5u xprt_transmit(%u)\n", task->tk_pid, req->rq_slen); if (!req->rq_received) { if (list_empty(&req->rq_list)) { @@ -736,7 +741,7 @@ void xprt_transmit(struct rpc_task *task) status = xprt->ops->send_request(task); if (status == 0) { - dprintk("RPC: %4d xmit complete\n", task->tk_pid); + dprintk("RPC: %5u xmit complete\n", task->tk_pid); spin_lock_bh(&xprt->transport_lock); xprt->ops->set_retrans_timeout(task); @@ -777,7 +782,7 @@ static inline void do_xprt_reserve(struct rpc_task *task) xprt_request_init(task, xprt); return; } - dprintk("RPC: waiting for request slot\n"); + dprintk("RPC: waiting for request slot\n"); task->tk_status = -EAGAIN; task->tk_timeout = 0; rpc_sleep_on(&xprt->backlog, task, NULL, NULL); @@ -822,7 +827,7 @@ static void xprt_request_init(struct rpc_task *task, struct rpc_xprt *xprt) req->rq_xid = xprt_alloc_xid(xprt); req->rq_release_snd_buf = NULL; xprt_reset_majortimeo(req); - dprintk("RPC: %4d reserved req %p xid %08x\n", task->tk_pid, + dprintk("RPC: %5u reserved req %p xid %08x\n", task->tk_pid, req, ntohl(req->rq_xid)); } @@ -856,7 +861,7 @@ void xprt_release(struct rpc_task *task) req->rq_release_snd_buf(req); memset(req, 0, sizeof(*req)); /* mark unused */ - dprintk("RPC: %4d release request %p\n", task->tk_pid, req); + dprintk("RPC: %5u release request %p\n", task->tk_pid, req); spin_lock(&xprt->reserve_lock); list_add(&req->rq_list, &xprt->free); @@ -906,7 +911,7 @@ struct rpc_xprt *xprt_create_transport(int proto, struct sockaddr *ap, size_t si return ERR_PTR(-EIO); } if (IS_ERR(xprt)) { - dprintk("RPC: xprt_create_transport: failed, %ld\n", + dprintk("RPC: xprt_create_transport: failed, %ld\n", -PTR_ERR(xprt)); return xprt; } @@ -936,7 +941,7 @@ struct rpc_xprt *xprt_create_transport(int proto, struct sockaddr *ap, size_t si xprt_init_xid(xprt); - dprintk("RPC: created transport %p with %u slots\n", xprt, + dprintk("RPC: created transport %p with %u slots\n", xprt, xprt->max_reqs); return xprt; @@ -951,7 +956,7 @@ static void xprt_destroy(struct kref *kref) { struct rpc_xprt *xprt = container_of(kref, struct rpc_xprt, kref); - dprintk("RPC: destroying transport %p\n", xprt); + dprintk("RPC: destroying transport %p\n", xprt); xprt->shutdown = 1; del_timer_sync(&xprt->timer); diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index 49cabff..64736b3 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -192,7 +192,7 @@ static void xs_pktdump(char *msg, u32 *packet, unsigned int count) u8 *buf = (u8 *) packet; int j; - dprintk("RPC: %s\n", msg); + dprintk("RPC: %s\n", msg); for (j = 0; j < count && j < 128; j += 4) { if (!(j & 31)) { if (j) @@ -418,7 +418,7 @@ static void xs_nospace(struct rpc_task *task) struct rpc_xprt *xprt = req->rq_xprt; struct sock_xprt *transport = container_of(xprt, struct sock_xprt, xprt); - dprintk("RPC: %4d xmit incomplete (%u left of %u)\n", + dprintk("RPC: %5u xmit incomplete (%u left of %u)\n", task->tk_pid, req->rq_slen - req->rq_bytes_sent, req->rq_slen); @@ -467,7 +467,7 @@ static int xs_udp_send_request(struct rpc_task *task) xprt->addrlen, xdr, req->rq_bytes_sent); - dprintk("RPC: xs_udp_send_request(%u) = %d\n", + dprintk("RPC: xs_udp_send_request(%u) = %d\n", xdr->len - req->rq_bytes_sent, status); if (likely(status >= (int) req->rq_slen)) @@ -488,7 +488,7 @@ static int xs_udp_send_request(struct rpc_task *task) xs_nospace(task); break; default: - dprintk("RPC: sendmsg returned unrecognized error %d\n", + dprintk("RPC: sendmsg returned unrecognized error %d\n", -status); break; } @@ -539,7 +539,7 @@ static int xs_tcp_send_request(struct rpc_task *task) status = xs_sendpages(transport->sock, NULL, 0, xdr, req->rq_bytes_sent); - dprintk("RPC: xs_tcp_send_request(%u) = %d\n", + dprintk("RPC: xs_tcp_send_request(%u) = %d\n", xdr->len - req->rq_bytes_sent, status); if (unlikely(status < 0)) @@ -570,7 +570,7 @@ static int xs_tcp_send_request(struct rpc_task *task) status = -ENOTCONN; break; default: - dprintk("RPC: sendmsg returned unrecognized error %d\n", + dprintk("RPC: sendmsg returned unrecognized error %d\n", -status); xprt_disconnect(xprt); break; @@ -622,7 +622,7 @@ static void xs_close(struct rpc_xprt *xprt) if (!sk) goto clear_close_wait; - dprintk("RPC: xs_close xprt %p\n", xprt); + dprintk("RPC: xs_close xprt %p\n", xprt); write_lock_bh(&sk->sk_callback_lock); transport->inet = NULL; @@ -652,7 +652,7 @@ static void xs_destroy(struct rpc_xprt *xprt) { struct sock_xprt *transport = container_of(xprt, struct sock_xprt, xprt); - dprintk("RPC: xs_destroy xprt %p\n", xprt); + dprintk("RPC: xs_destroy xprt %p\n", xprt); cancel_delayed_work(&transport->connect_worker); flush_scheduled_work(); @@ -686,7 +686,7 @@ static void xs_udp_data_ready(struct sock *sk, int len) __be32 *xp; read_lock(&sk->sk_callback_lock); - dprintk("RPC: xs_udp_data_ready...\n"); + dprintk("RPC: xs_udp_data_ready...\n"); if (!(xprt = xprt_from_sock(sk))) goto out; @@ -698,7 +698,7 @@ static void xs_udp_data_ready(struct sock *sk, int len) repsize = skb->len - sizeof(struct udphdr); if (repsize < 4) { - dprintk("RPC: impossible RPC reply size %d!\n", repsize); + dprintk("RPC: impossible RPC reply size %d!\n", repsize); goto dropit; } @@ -762,11 +762,11 @@ static inline void xs_tcp_read_fraghdr(struct rpc_xprt *xprt, struct xdr_skb_rea /* Sanity check of the record length */ if (unlikely(transport->tcp_reclen < 4)) { - dprintk("RPC: invalid TCP record fragment length\n"); + dprintk("RPC: invalid TCP record fragment length\n"); xprt_disconnect(xprt); return; } - dprintk("RPC: reading TCP record fragment of length %d\n", + dprintk("RPC: reading TCP record fragment of length %d\n", transport->tcp_reclen); } @@ -789,7 +789,7 @@ static inline void xs_tcp_read_xid(struct sock_xprt *transport, struct xdr_skb_r char *p; len = sizeof(transport->tcp_xid) - transport->tcp_offset; - dprintk("RPC: reading XID (%Zu bytes)\n", len); + dprintk("RPC: reading XID (%Zu bytes)\n", len); p = ((char *) &transport->tcp_xid) + transport->tcp_offset; used = xdr_skb_read_bits(desc, p, len); transport->tcp_offset += used; @@ -798,7 +798,7 @@ static inline void xs_tcp_read_xid(struct sock_xprt *transport, struct xdr_skb_r transport->tcp_flags &= ~TCP_RCV_COPY_XID; transport->tcp_flags |= TCP_RCV_COPY_DATA; transport->tcp_copied = 4; - dprintk("RPC: reading reply for XID %08x\n", + dprintk("RPC: reading reply for XID %08x\n", ntohl(transport->tcp_xid)); xs_tcp_check_fraghdr(transport); } @@ -816,7 +816,7 @@ static inline void xs_tcp_read_request(struct rpc_xprt *xprt, struct xdr_skb_rea req = xprt_lookup_rqst(xprt, transport->tcp_xid); if (!req) { transport->tcp_flags &= ~TCP_RCV_COPY_DATA; - dprintk("RPC: XID %08x request not found!\n", + dprintk("RPC: XID %08x request not found!\n", ntohl(transport->tcp_xid)); spin_unlock(&xprt->transport_lock); return; @@ -853,19 +853,20 @@ static inline void xs_tcp_read_request(struct rpc_xprt *xprt, struct xdr_skb_rea * be discarded. */ transport->tcp_flags &= ~TCP_RCV_COPY_DATA; - dprintk("RPC: XID %08x truncated request\n", + dprintk("RPC: XID %08x truncated request\n", ntohl(transport->tcp_xid)); - dprintk("RPC: xprt = %p, tcp_copied = %lu, tcp_offset = %u, tcp_reclen = %u\n", - xprt, transport->tcp_copied, transport->tcp_offset, - transport->tcp_reclen); + dprintk("RPC: xprt = %p, tcp_copied = %lu, " + "tcp_offset = %u, tcp_reclen = %u\n", + xprt, transport->tcp_copied, + transport->tcp_offset, transport->tcp_reclen); goto out; } - dprintk("RPC: XID %08x read %Zd bytes\n", + dprintk("RPC: XID %08x read %Zd bytes\n", ntohl(transport->tcp_xid), r); - dprintk("RPC: xprt = %p, tcp_copied = %lu, tcp_offset = %u, tcp_reclen = %u\n", - xprt, transport->tcp_copied, transport->tcp_offset, - transport->tcp_reclen); + dprintk("RPC: xprt = %p, tcp_copied = %lu, tcp_offset = %u, " + "tcp_reclen = %u\n", xprt, transport->tcp_copied, + transport->tcp_offset, transport->tcp_reclen); if (transport->tcp_copied == req->rq_private_buf.buflen) transport->tcp_flags &= ~TCP_RCV_COPY_DATA; @@ -891,7 +892,7 @@ static inline void xs_tcp_read_discard(struct sock_xprt *transport, struct xdr_s desc->count -= len; desc->offset += len; transport->tcp_offset += len; - dprintk("RPC: discarded %Zu bytes\n", len); + dprintk("RPC: discarded %Zu bytes\n", len); xs_tcp_check_fraghdr(transport); } @@ -905,7 +906,7 @@ static int xs_tcp_data_recv(read_descriptor_t *rd_desc, struct sk_buff *skb, uns .count = len, }; - dprintk("RPC: xs_tcp_data_recv started\n"); + dprintk("RPC: xs_tcp_data_recv started\n"); do { /* Read in a new fragment marker if necessary */ /* Can we ever really expect to get completely empty fragments? */ @@ -926,7 +927,7 @@ static int xs_tcp_data_recv(read_descriptor_t *rd_desc, struct sk_buff *skb, uns /* Skip over any trailing bytes on short reads */ xs_tcp_read_discard(transport, &desc); } while (desc.count); - dprintk("RPC: xs_tcp_data_recv done\n"); + dprintk("RPC: xs_tcp_data_recv done\n"); return len - desc.count; } @@ -941,8 +942,9 @@ static void xs_tcp_data_ready(struct sock *sk, int bytes) struct rpc_xprt *xprt; read_descriptor_t rd_desc; + dprintk("RPC: xs_tcp_data_ready...\n"); + read_lock(&sk->sk_callback_lock); - dprintk("RPC: xs_tcp_data_ready...\n"); if (!(xprt = xprt_from_sock(sk))) goto out; if (xprt->shutdown) @@ -968,11 +970,11 @@ static void xs_tcp_state_change(struct sock *sk) read_lock(&sk->sk_callback_lock); if (!(xprt = xprt_from_sock(sk))) goto out; - dprintk("RPC: xs_tcp_state_change client %p...\n", xprt); - dprintk("RPC: state %x conn %d dead %d zapped %d\n", - sk->sk_state, xprt_connected(xprt), - sock_flag(sk, SOCK_DEAD), - sock_flag(sk, SOCK_ZAPPED)); + dprintk("RPC: xs_tcp_state_change client %p...\n", xprt); + dprintk("RPC: state %x conn %d dead %d zapped %d\n", + sk->sk_state, xprt_connected(xprt), + sock_flag(sk, SOCK_DEAD), + sock_flag(sk, SOCK_ZAPPED)); switch (sk->sk_state) { case TCP_ESTABLISHED: @@ -1140,7 +1142,7 @@ static void xs_set_port(struct rpc_xprt *xprt, unsigned short port) { struct sockaddr_in *sap = (struct sockaddr_in *) &xprt->addr; - dprintk("RPC: setting port for xprt %p to %u\n", xprt, port); + dprintk("RPC: setting port for xprt %p to %u\n", xprt, port); sap->sin_port = htons(port); } @@ -1159,7 +1161,7 @@ static int xs_bindresvport(struct sock_xprt *transport, struct socket *sock) sizeof(myaddr)); if (err == 0) { transport->port = port; - dprintk("RPC: xs_bindresvport bound to port %u\n", + dprintk("RPC: xs_bindresvport bound to port %u\n", port); return 0; } @@ -1169,7 +1171,7 @@ static int xs_bindresvport(struct sock_xprt *transport, struct socket *sock) port--; } while (err == -EADDRINUSE && port != transport->port); - dprintk("RPC: can't bind to reserved port (%d).\n", -err); + dprintk("RPC: can't bind to reserved port (%d).\n", -err); return err; } @@ -1223,7 +1225,7 @@ static void xs_udp_connect_worker(struct work_struct *work) xs_close(xprt); if ((err = sock_create_kern(PF_INET, SOCK_DGRAM, IPPROTO_UDP, &sock)) < 0) { - dprintk("RPC: can't create UDP transport socket (%d).\n", -err); + dprintk("RPC: can't create UDP transport socket (%d).\n", -err); goto out; } xs_reclassify_socket(sock); @@ -1233,7 +1235,7 @@ static void xs_udp_connect_worker(struct work_struct *work) goto out; } - dprintk("RPC: worker connecting xprt %p to address: %s\n", + dprintk("RPC: worker connecting xprt %p to address: %s\n", xprt, xprt->address_strings[RPC_DISPLAY_ALL]); if (!transport->inet) { @@ -1275,7 +1277,7 @@ static void xs_tcp_reuse_connection(struct rpc_xprt *xprt) struct sock_xprt *transport = container_of(xprt, struct sock_xprt, xprt); struct sockaddr any; - dprintk("RPC: disconnecting xprt %p to reuse port\n", xprt); + dprintk("RPC: disconnecting xprt %p to reuse port\n", xprt); /* * Disconnect the transport socket by doing a connect operation @@ -1285,7 +1287,7 @@ static void xs_tcp_reuse_connection(struct rpc_xprt *xprt) any.sa_family = AF_UNSPEC; result = kernel_connect(transport->sock, &any, sizeof(any), 0); if (result) - dprintk("RPC: AF_UNSPEC connect return code %d\n", + dprintk("RPC: AF_UNSPEC connect return code %d\n", result); } @@ -1309,7 +1311,8 @@ static void xs_tcp_connect_worker(struct work_struct *work) if (!sock) { /* start from scratch */ if ((err = sock_create_kern(PF_INET, SOCK_STREAM, IPPROTO_TCP, &sock)) < 0) { - dprintk("RPC: can't create TCP transport socket (%d).\n", -err); + dprintk("RPC: can't create TCP transport " + "socket (%d).\n", -err); goto out; } xs_reclassify_socket(sock); @@ -1322,7 +1325,7 @@ static void xs_tcp_connect_worker(struct work_struct *work) /* "close" the socket, preserving the local port */ xs_tcp_reuse_connection(xprt); - dprintk("RPC: worker connecting xprt %p to address: %s\n", + dprintk("RPC: worker connecting xprt %p to address: %s\n", xprt, xprt->address_strings[RPC_DISPLAY_ALL]); if (!transport->inet) { @@ -1359,8 +1362,9 @@ static void xs_tcp_connect_worker(struct work_struct *work) xprt->stat.connect_start = jiffies; status = kernel_connect(sock, (struct sockaddr *) &xprt->addr, xprt->addrlen, O_NONBLOCK); - dprintk("RPC: %p connect status %d connected %d sock state %d\n", - xprt, -status, xprt_connected(xprt), sock->sk->sk_state); + dprintk("RPC: %p connect status %d connected %d sock state %d\n", + xprt, -status, xprt_connected(xprt), + sock->sk->sk_state); if (status < 0) { switch (status) { case -EINPROGRESS: @@ -1404,7 +1408,8 @@ static void xs_connect(struct rpc_task *task) return; if (transport->sock != NULL) { - dprintk("RPC: xs_connect delayed xprt %p for %lu seconds\n", + dprintk("RPC: xs_connect delayed xprt %p for %lu " + "seconds\n", xprt, xprt->reestablish_timeout / HZ); schedule_delayed_work(&transport->connect_worker, xprt->reestablish_timeout); @@ -1412,7 +1417,7 @@ static void xs_connect(struct rpc_task *task) if (xprt->reestablish_timeout > XS_TCP_MAX_REEST_TO) xprt->reestablish_timeout = XS_TCP_MAX_REEST_TO; } else { - dprintk("RPC: xs_connect scheduled xprt %p\n", xprt); + dprintk("RPC: xs_connect scheduled xprt %p\n", xprt); schedule_delayed_work(&transport->connect_worker, 0); /* flush_scheduled_work can sleep... */ @@ -1507,13 +1512,14 @@ static struct rpc_xprt *xs_setup_xprt(struct sockaddr *addr, size_t addrlen, uns struct sock_xprt *new; if (addrlen > sizeof(xprt->addr)) { - dprintk("RPC: xs_setup_xprt: address too large\n"); + dprintk("RPC: xs_setup_xprt: address too large\n"); return ERR_PTR(-EBADF); } new = kzalloc(sizeof(*new), GFP_KERNEL); if (new == NULL) { - dprintk("RPC: xs_setup_xprt: couldn't allocate rpc_xprt\n"); + dprintk("RPC: xs_setup_xprt: couldn't allocate " + "rpc_xprt\n"); return ERR_PTR(-ENOMEM); } xprt = &new->xprt; @@ -1522,7 +1528,8 @@ static struct rpc_xprt *xs_setup_xprt(struct sockaddr *addr, size_t addrlen, uns xprt->slot = kcalloc(xprt->max_reqs, sizeof(struct rpc_rqst), GFP_KERNEL); if (xprt->slot == NULL) { kfree(xprt); - dprintk("RPC: xs_setup_xprt: couldn't allocate slot table\n"); + dprintk("RPC: xs_setup_xprt: couldn't allocate slot " + "table\n"); return ERR_PTR(-ENOMEM); } @@ -1572,7 +1579,7 @@ struct rpc_xprt *xs_setup_udp(struct sockaddr *addr, size_t addrlen, struct rpc_ xprt_set_timeout(&xprt->timeout, 5, 5 * HZ); xs_format_peer_addresses(xprt); - dprintk("RPC: set up transport to address %s\n", + dprintk("RPC: set up transport to address %s\n", xprt->address_strings[RPC_DISPLAY_ALL]); return xprt; @@ -1616,7 +1623,7 @@ struct rpc_xprt *xs_setup_tcp(struct sockaddr *addr, size_t addrlen, struct rpc_ xprt_set_timeout(&xprt->timeout, 2, 60 * HZ); xs_format_peer_addresses(xprt); - dprintk("RPC: set up transport to address %s\n", + dprintk("RPC: set up transport to address %s\n", xprt->address_strings[RPC_DISPLAY_ALL]); return xprt; -- cgit v0.10.2 From 1d21632d366b33b3adf4fa26144edf3162a9715d Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 2 Feb 2007 15:56:06 -0800 Subject: NFSv4: Ensure non-root user can trigger a referral automount Currently only root can trigger a referral automount because only root can access rpc_pipefs directories. Enabling read access to non-root should be harmless (they can still not access the pipes themselves) and will suffice to fix this problem. Signed-off-by: Trond Myklebust diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c index 89273d3..0812828 100644 --- a/net/sunrpc/rpc_pipe.c +++ b/net/sunrpc/rpc_pipe.c @@ -589,7 +589,7 @@ __rpc_mkdir(struct inode *dir, struct dentry *dentry) { struct inode *inode; - inode = rpc_get_inode(dir->i_sb, S_IFDIR | S_IRUSR | S_IXUSR); + inode = rpc_get_inode(dir->i_sb, S_IFDIR | S_IRUGO | S_IXUGO); if (!inode) goto out_err; inode->i_ino = iunique(dir->i_sb, 100); -- cgit v0.10.2 From 588a700b269b785b19d5d03084bee5e1b74c7758 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 2 Feb 2007 17:41:53 -0800 Subject: NFSv4: /proc/mounts displays the wrong server name for referrals Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4namespace.c b/fs/nfs/nfs4namespace.c index 03a9972..dd5fef2 100644 --- a/fs/nfs/nfs4namespace.c +++ b/fs/nfs/nfs4namespace.c @@ -131,7 +131,6 @@ static struct vfsmount *nfs_follow_referral(const struct vfsmount *mnt_parent, .authflavor = NFS_SB(mnt_parent->mnt_sb)->client->cl_auth->au_flavor, }; char *page = NULL, *page2 = NULL; - char *devname; int loc, s, error; if (locations == NULL || locations->nlocations <= 0) @@ -155,12 +154,6 @@ static struct vfsmount *nfs_follow_referral(const struct vfsmount *mnt_parent, goto out; } - devname = nfs_devname(mnt_parent, dentry, page, PAGE_SIZE); - if (IS_ERR(devname)) { - mnt = (struct vfsmount *)devname; - goto out; - } - loc = 0; while (loc < locations->nlocations && IS_ERR(mnt)) { const struct nfs4_fs_location *location = &locations->locations[loc]; @@ -195,7 +188,11 @@ static struct vfsmount *nfs_follow_referral(const struct vfsmount *mnt_parent, addr.sin_port = htons(NFS_PORT); mountdata.addr = &addr; - mnt = vfs_kern_mount(&nfs4_referral_fs_type, 0, devname, &mountdata); + snprintf(page, PAGE_SIZE, "%s:%s", + mountdata.hostname, + mountdata.mnt_path); + + mnt = vfs_kern_mount(&nfs4_referral_fs_type, 0, page, &mountdata); if (!IS_ERR(mnt)) { break; } -- cgit v0.10.2 From e4ac5e4f55f55b16e084a46b1b8e233f490ba701 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sun, 4 Feb 2007 17:37:42 -0500 Subject: [AGPGART] Don't try to remap i810 registers on resume. We don't unmap them on the suspend path, so on resume trying to remap will fail, and then result in an oops the next time something tries to access them. Signed-off-by: Dave Jones diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 4e455f0..49cf7e2 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -124,13 +124,15 @@ static int intel_i810_configure(void) current_size = A_SIZE_FIX(agp_bridge->current_size); - pci_read_config_dword(intel_i810_private.i810_dev, I810_MMADDR, &temp); - temp &= 0xfff80000; - - intel_i810_private.registers = ioremap(temp, 128 * 4096); if (!intel_i810_private.registers) { - printk(KERN_ERR PFX "Unable to remap memory.\n"); - return -ENOMEM; + pci_read_config_dword(intel_i810_private.i810_dev, I810_MMADDR, &temp); + temp &= 0xfff80000; + + intel_i810_private.registers = ioremap(temp, 128 * 4096); + if (!intel_i810_private.registers) { + printk(KERN_ERR PFX "Unable to remap memory.\n"); + return -ENOMEM; + } } if ((readl(intel_i810_private.registers+I810_DRAM_CTL) -- cgit v0.10.2 From 46ef955f5c9de0507859a3f9a92989b7425b73cc Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=B3=20Bilski?= Date: Sun, 4 Feb 2007 15:58:46 +0100 Subject: [CPUFREQ] Longhaul - Fix guess_fsb function This is bug reported by John-Marc Chandonia: > Detected 1002.292 MHz processor. > longhaul: VIA C3 'Nehemiah B' [C5N] CPU detected. Powersaver supported. > longhaul: Using throttling support. > longhaul: Invalid (reserved) FSB! FSB is correcly guessed for 999.554 MHz CPU. To fix this error: - ROUNDING should be range, not mask - at it's current value it is +7 -8, - more precise calculations inside guess_fsb - 7.5x133MHz is 1000MHz now. Signed-off-by: Rafal Bilski Signed-off-by: Dave Jones diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index 8ea34e9..8b5ad30 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -318,31 +318,19 @@ static void longhaul_setstate(unsigned int clock_ratio_index) #define ROUNDING 0xf -static int _guess(int guess, int mult) -{ - int target; - - target = ((mult/10)*guess); - if (mult%10 != 0) - target += (guess/2); - target += ROUNDING/2; - target &= ~ROUNDING; - return target; -} - - static int guess_fsb(int mult) { - int speed = (cpu_khz/1000); + int speed = cpu_khz / 1000; int i; - int speeds[] = { 66, 100, 133, 200 }; - - speed += ROUNDING/2; - speed &= ~ROUNDING; - - for (i=0; i<4; i++) { - if (_guess(speeds[i], mult) == speed) - return speeds[i]; + int speeds[] = { 666, 1000, 1333, 2000 }; + int f_max, f_min; + + for (i = 0; i < 4; i++) { + f_max = ((speeds[i] * mult) + 50) / 100; + f_max += (ROUNDING / 2); + f_min = f_max - ROUNDING; + if ((speed <= f_max) && (speed >= f_min)) + return speeds[i] / 10; } return 0; } -- cgit v0.10.2 From 786f46b262cb7a491f4b144e42f076d5a1ef8eef Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=B3=20Bilski?= Date: Sun, 4 Feb 2007 18:43:12 +0100 Subject: [CPUFREQ] Longhaul - Add VT8235 support I don't know why it is working and how, but it is working. On my Epia transition time is by default set to 100us. I'm changing it to 200us. After that I can change frequency from min (x4.0) to max (x7.5) without lockup. Many times. There is a paranoid check at a beginning of a patch. Probably dead code, but I don't have better ideas for CL10000 case at the moment. Only way to to detect broken chip seems to be looking in log for spurious interrupts. Signed-off-by: Rafal Bilski Signed-off-by: Dave Jones diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index 8b5ad30..98fbe28 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -56,6 +56,7 @@ /* Flags */ #define USE_ACPI_C3 (1 << 1) #define USE_NORTHBRIDGE (1 << 2) +#define USE_VT8235 (1 << 3) static int cpu_model; static unsigned int numscales=16; @@ -544,20 +545,50 @@ static int enable_arbiter_disable(void) if (dev != NULL) { /* Enable access to port 0x22 */ pci_read_config_byte(dev, reg, &pci_cmd); - if ( !(pci_cmd & 1<<7) ) { + if (!(pci_cmd & 1<<7)) { pci_cmd |= 1<<7; pci_write_config_byte(dev, reg, pci_cmd); + pci_read_config_byte(dev, reg, &pci_cmd); + if (!(pci_cmd & 1<<7)) { + printk(KERN_ERR PFX + "Can't enable access to port 0x22.\n"); + return 0; + } } return 1; } return 0; } +static int longhaul_setup_vt8235(void) +{ + struct pci_dev *dev; + u8 pci_cmd; + + /* Find VT8235 southbridge */ + dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL); + if (dev != NULL) { + /* Set transition time to max */ + pci_read_config_byte(dev, 0xec, &pci_cmd); + pci_cmd &= ~(1 << 2); + pci_write_config_byte(dev, 0xec, pci_cmd); + pci_read_config_byte(dev, 0xe4, &pci_cmd); + pci_cmd &= ~(1 << 7); + pci_write_config_byte(dev, 0xe4, pci_cmd); + pci_read_config_byte(dev, 0xe5, &pci_cmd); + pci_cmd |= 1 << 7; + pci_write_config_byte(dev, 0xe5, pci_cmd); + return 1; + } + return 0; +} + static int __init longhaul_cpu_init(struct cpufreq_policy *policy) { struct cpuinfo_x86 *c = cpu_data; char *cpuname=NULL; int ret; + int vt8235_present; /* Check what we have on this motherboard */ switch (c->x86_model) { @@ -641,12 +672,16 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) break; }; + /* Doesn't hurt */ + vt8235_present = longhaul_setup_vt8235(); + /* Find ACPI data for processor */ - acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, - &longhaul_walk_callback, NULL, (void *)&pr); + acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, &longhaul_walk_callback, + NULL, (void *)&pr); /* Check ACPI support for C3 state */ - if ((pr != NULL) && (longhaul_version == TYPE_POWERSAVER)) { + if (pr != NULL && longhaul_version == TYPE_POWERSAVER) { cx = &pr->power.states[ACPI_STATE_C3]; if (cx->address > 0 && cx->latency <= 1000) { longhaul_flags |= USE_ACPI_C3; @@ -658,8 +693,11 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) longhaul_flags |= USE_NORTHBRIDGE; goto print_support_type; } - - /* No ACPI C3 or we can't use it */ + /* Use VT8235 southbridge if present */ + if (longhaul_version == TYPE_POWERSAVER && vt8235_present) { + longhaul_flags |= USE_VT8235; + goto print_support_type; + } /* Check ACPI support for bus master arbiter disable */ if ((pr == NULL) || !(pr->flags.bm_control)) { printk(KERN_ERR PFX @@ -668,18 +706,18 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) } print_support_type: - if (!(longhaul_flags & USE_NORTHBRIDGE)) { - printk (KERN_INFO PFX "Using ACPI support.\n"); - } else { + if (longhaul_flags & USE_NORTHBRIDGE) printk (KERN_INFO PFX "Using northbridge support.\n"); - } + else if (longhaul_flags & USE_VT8235) + printk (KERN_INFO PFX "Using VT8235 support.\n"); + else + printk (KERN_INFO PFX "Using ACPI support.\n"); ret = longhaul_get_ranges(); if (ret != 0) return ret; - if ((longhaul_version==TYPE_LONGHAUL_V2 || longhaul_version==TYPE_POWERSAVER) && - (scale_voltage != 0)) + if ((longhaul_version != TYPE_LONGHAUL_V1) && (scale_voltage != 0)) longhaul_setup_voltagescaling(); policy->governor = CPUFREQ_DEFAULT_GOVERNOR; -- cgit v0.10.2 From bf1e5989aa5783726c6a94931f92b34aa387ec30 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Mon, 5 Feb 2007 14:44:23 +0100 Subject: [AGPGART] Add agp-type-to-mask-type method missing from some drivers. Signed-off-by: Dave Jones diff --git a/drivers/char/agp/parisc-agp.c b/drivers/char/agp/parisc-agp.c index 17c50b0..b7b4590 100644 --- a/drivers/char/agp/parisc-agp.c +++ b/drivers/char/agp/parisc-agp.c @@ -228,6 +228,7 @@ struct agp_bridge_driver parisc_agp_driver = { .free_by_type = agp_generic_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, .cant_use_aperture = 1, }; diff --git a/drivers/char/agp/sis-agp.c b/drivers/char/agp/sis-agp.c index a00fd48..60342b7 100644 --- a/drivers/char/agp/sis-agp.c +++ b/drivers/char/agp/sis-agp.c @@ -140,6 +140,7 @@ static struct agp_bridge_driver sis_driver = { .free_by_type = agp_generic_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, }; static struct agp_device_ids sis_agp_device_ids[] __devinitdata = -- cgit v0.10.2 From 1eaf122cda2c135f90b9e610a847e6d4627b577c Mon Sep 17 00:00:00 2001 From: "Ahmed S. Darwish" Date: Tue, 6 Feb 2007 18:08:28 +0200 Subject: [AGPGART] intel-agp: Use ARRAY_SIZE macro when appropriate use ARRAY_SIZE macro already defined in kernel.h Signed-off-by: Ahmed S. Darwish Signed-off-by: Dave Jones diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 49cf7e2..6b9fb21 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -5,6 +5,7 @@ #include #include #include +#include #include #include #include "agp.h" @@ -846,7 +847,7 @@ static int intel_i915_remove_entries(struct agp_memory *mem,off_t pg_start, */ static int intel_i9xx_fetch_size(void) { - int num_sizes = sizeof(intel_i830_sizes) / sizeof(*intel_i830_sizes); + int num_sizes = ARRAY_SIZE(intel_i830_sizes); int aper_size; /* size in megabytes */ int i; -- cgit v0.10.2 From 87f440e70e07dace7db130f2f9fcea3f132aad8f Mon Sep 17 00:00:00 2001 From: Steve French Date: Wed, 7 Feb 2007 00:29:46 +0000 Subject: [CIFS] Additional POSIX CIFS Extensions infolevels also includes cleanup of whitespace/80 columns Signed-off-by: Steve French diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h index 068ef51..2920ea0 100644 --- a/fs/cifs/cifspdu.h +++ b/fs/cifs/cifspdu.h @@ -1,7 +1,7 @@ /* * fs/cifs/cifspdu.h * - * Copyright (c) International Business Machines Corp., 2002,2005 + * Copyright (c) International Business Machines Corp., 2002,2007 * Author(s): Steve French (sfrench@us.ibm.com) * * This library is free software; you can redistribute it and/or modify @@ -544,7 +544,8 @@ typedef union smb_com_session_setup_andx { /* unsigned char * NativeOS; */ /* unsigned char * NativeLanMan; */ /* unsigned char * PrimaryDomain; */ - } __attribute__((packed)) resp; /* NTLM response with or without extended sec*/ + } __attribute__((packed)) resp; /* NTLM response + (with or without extended sec) */ struct { /* request format */ struct smb_hdr hdr; /* wct = 10 */ @@ -1352,11 +1353,13 @@ struct smb_t2_rsp { #define SMB_QUERY_FILE_UNIX_BASIC 0x200 #define SMB_QUERY_FILE_UNIX_LINK 0x201 #define SMB_QUERY_POSIX_ACL 0x204 -#define SMB_QUERY_XATTR 0x205 +#define SMB_QUERY_XATTR 0x205 /* e.g. system EA name space */ #define SMB_QUERY_ATTR_FLAGS 0x206 /* append,immutable etc. */ #define SMB_QUERY_POSIX_PERMISSION 0x207 #define SMB_QUERY_POSIX_LOCK 0x208 -/* #define SMB_POSIX_OPEN 0x209 */ +/* #define SMB_POSIX_OPEN 0x209 */ +/* #define SMB_POSIX_UNLINK 0x20a */ +#define SMB_QUERY_FILE__UNIX_INFO2 0x20b #define SMB_QUERY_FILE_INTERNAL_INFO 0x3ee #define SMB_QUERY_FILE_ACCESS_INFO 0x3f0 #define SMB_QUERY_FILE_NAME_INFO2 0x3f1 /* 0x30 bytes */ @@ -1377,8 +1380,10 @@ struct smb_t2_rsp { #define SMB_SET_ATTR_FLAGS 0x206 /* append, immutable etc. */ #define SMB_SET_POSIX_LOCK 0x208 #define SMB_POSIX_OPEN 0x209 +#define SMB_POSIX_UNLINK 0x20a +#define SMB_SET_FILE_UNIX_INFO2 #define SMB_SET_FILE_BASIC_INFO2 0x3ec -#define SMB_SET_FILE_RENAME_INFORMATION 0x3f2 /* BB check if qpathinfo level too */ +#define SMB_SET_FILE_RENAME_INFORMATION 0x3f2 /* BB check if qpathinfo too */ #define SMB_FILE_ALL_INFO2 0x3fa #define SMB_SET_FILE_ALLOCATION_INFO2 0x3fb #define SMB_SET_FILE_END_OF_FILE_INFO2 0x3fc @@ -1428,7 +1433,7 @@ typedef struct smb_com_transaction2_qpi_rsp { struct smb_hdr hdr; /* wct = 10 + SetupCount */ struct trans2_resp t2; __u16 ByteCount; - __u16 Reserved2; /* parameter word reserved - present for infolevels > 100 */ + __u16 Reserved2; /* parameter word is present for infolevels > 100 */ } __attribute__((packed)) TRANSACTION2_QPI_RSP; typedef struct smb_com_transaction2_spi_req { @@ -1461,7 +1466,7 @@ typedef struct smb_com_transaction2_spi_rsp { struct smb_hdr hdr; /* wct = 10 + SetupCount */ struct trans2_resp t2; __u16 ByteCount; - __u16 Reserved2; /* parameter word reserved - present for infolevels > 100 */ + __u16 Reserved2; /* parameter word is present for infolevels > 100 */ } __attribute__((packed)) TRANSACTION2_SPI_RSP; struct set_file_rename { @@ -1627,6 +1632,7 @@ typedef struct smb_com_transaction2_fnext_rsp_parms { #define SMB_QUERY_FS_ATTRIBUTE_INFO 0x105 #define SMB_QUERY_CIFS_UNIX_INFO 0x200 #define SMB_QUERY_POSIX_FS_INFO 0x201 +#define SMB_QUERY_POSIX_WHO_AM_I 0x202 #define SMB_QUERY_LABEL_INFO 0x3ea #define SMB_QUERY_FS_QUOTA_INFO 0x3ee #define SMB_QUERY_FS_FULL_SIZE_INFO 0x3ef @@ -1659,9 +1665,21 @@ typedef struct smb_com_transaction_qfsi_rsp { struct smb_hdr hdr; /* wct = 10 + SetupCount */ struct trans2_resp t2; __u16 ByteCount; - __u8 Pad; /* may be three bytes *//* followed by data area */ + __u8 Pad; /* may be three bytes? *//* followed by data area */ } __attribute__((packed)) TRANSACTION2_QFSI_RSP; +typedef struct whoami_rsp_data { /* Query level 0x202 */ + __u32 flags; /* 0 = Authenticated user 1 = GUEST */ + __u32 mask; /* which flags bits server understands ie 0x0001 */ + __u64 unix_user_id; + __u64 unix_user_gid; + __u32 number_of_supplementary_gids; /* may be zero */ + __u32 number_of_sids; /* may be zero */ + __u32 length_of_sid_array; /* in bytes - may be zero */ + __u32 pad; /* reserved - MBZ */ + /* __u64 gid_array[0]; */ /* may be empty */ + /* __u8 * psid_list */ /* may be empty */ +} __attribute__((packed)) WHOAMI_RSP_DATA; /* SETFSInfo Levels */ #define SMB_SET_CIFS_UNIX_INFO 0x200 @@ -1858,8 +1876,11 @@ typedef struct { #define CIFS_UNIX_XATTR_CAP 0x00000004 /* support new namespace */ #define CIFS_UNIX_EXTATTR_CAP 0x00000008 /* support chattr/chflag */ #define CIFS_UNIX_POSIX_PATHNAMES_CAP 0x00000010 /* Allow POSIX path chars */ +#define CIFS_UNIX_POSIX_PATH_OPS_CAP 0x00000020 /* Allow new POSIX path based + calls including posix open + and posix unlink */ #ifdef CONFIG_CIFS_POSIX -#define CIFS_UNIX_CAP_MASK 0x0000001b +#define CIFS_UNIX_CAP_MASK 0x0000003b #else #define CIFS_UNIX_CAP_MASK 0x00000013 #endif /* CONFIG_CIFS_POSIX */ @@ -1946,7 +1967,7 @@ typedef struct { /* data block encoding of response to level 263 QPathInfo */ __le32 AlignmentRequirement; __le32 FileNameLength; char FileName[1]; -} __attribute__((packed)) FILE_ALL_INFO; /* level 0x107 QPathInfo */ +} __attribute__((packed)) FILE_ALL_INFO; /* level 0x107 QPathInfo */ /* defines for enumerating possible values of the Unix type field below */ #define UNIX_FILE 0 @@ -1970,11 +1991,11 @@ typedef struct { __u64 UniqueId; __le64 Permissions; __le64 Nlinks; -} __attribute__((packed)) FILE_UNIX_BASIC_INFO; /* level 0x200 QPathInfo */ +} __attribute__((packed)) FILE_UNIX_BASIC_INFO; /* level 0x200 QPathInfo */ typedef struct { char LinkDest[1]; -} __attribute__((packed)) FILE_UNIX_LINK_INFO; /* level 0x201 QPathInfo */ +} __attribute__((packed)) FILE_UNIX_LINK_INFO; /* level 0x201 QPathInfo */ /* The following three structures are needed only for setting time to NT4 and some older servers via @@ -2011,7 +2032,7 @@ typedef struct { __le64 ChangeTime; __le32 Attributes; __u32 Pad; -} __attribute__((packed)) FILE_BASIC_INFO; /* size info, level 0x101 */ +} __attribute__((packed)) FILE_BASIC_INFO; /* size info, level 0x101 */ struct file_allocation_info { __le64 AllocationSize; /* Note old Samba srvr rounds this up too much */ @@ -2020,7 +2041,7 @@ struct file_allocation_info { struct file_end_of_file_info { __le64 FileSize; /* offset to end of file */ -} __attribute__((packed)); /* size info, level 0x104 for set, 0x106 for query */ +} __attribute__((packed)); /* size info, level 0x104 for set, 0x106 for query */ struct file_alt_name_info { __u8 alt_name[1]; @@ -2238,7 +2259,8 @@ struct data_blob { 1) PosixCreateX - to set and return the mode, inode#, device info and perhaps add a CreateDevice - to create Pipes and other special .inodes Also note POSIX open flags - 2) Close - to return the last write time to do cache across close more safely + 2) Close - to return the last write time to do cache across close + more safely 3) FindFirst return unique inode number - what about resume key, two forms short (matches readdir) and full (enough info to cache inodes) 4) Mkdir - set mode @@ -2273,7 +2295,8 @@ struct data_blob { TRANSACTION2 (18 cases) SMB_SET_FILE_END_OF_FILE_INFO2 SMB_SET_PATH_END_OF_FILE_INFO2 (BB verify that never need to set allocation size) - SMB_SET_FILE_BASIC_INFO2 (setting times - BB can it be done via Unix ext?) + SMB_SET_FILE_BASIC_INFO2 (setting times - BB can it be done via + Unix ext?) COPY (note support for copy across directories) - FUTURE, OPTIONAL setting/getting OS/2 EAs - FUTURE (BB can this handle @@ -2293,13 +2316,13 @@ struct data_blob { T2 QUERY_PATH_INFO (SMB_QUERY_FILE_UNIX_BASIC) - BB check for missing inode fields Actually need QUERY_FILE_UNIX_INFO since has inode num BB what about a) blksize/blkbits/blocks - b) i_version - c) i_rdev - d) notify mask? - e) generation - f) size_seqcount + b) i_version + c) i_rdev + d) notify mask? + e) generation + f) size_seqcount T2 FIND_FIRST/FIND_NEXT FIND_FILE_UNIX - TRANS2_GET_DFS_REFERRAL - OPTIONAL but recommended + TRANS2_GET_DFS_REFERRAL - OPTIONAL but recommended T2_QFS_INFO QueryDevice/AttributeInfo - OPTIONAL @@ -2338,7 +2361,7 @@ typedef struct file_xattr_info { __u32 xattr_value_len; char xattr_name[0]; /* followed by xattr_value[xattr_value_len], no pad */ -} __attribute__((packed)) FILE_XATTR_INFO; /* extended attribute, info level 0x205 */ +} __attribute__((packed)) FILE_XATTR_INFO; /* extended attribute, info level 0x205 */ /* flags for chattr command */ -- cgit v0.10.2 From b359049f270dcaab8a5bbdbb966594c16caba16c Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 7 Feb 2007 22:19:12 -0600 Subject: [POWERPC] 83xx: Add base support for the MPC8313E RDB Add support for the MPC8313E Reference Development Board (RDB). The board is a mini-ITX reference board with 128M DDR2, 8M flash, 32M NAND, USB, PCI, gigabit ethernet, and serial. Signed-off-by: Wilson Lo Signed-off-by: Scott Wood Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts new file mode 100644 index 0000000..3d2f5a0 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -0,0 +1,219 @@ +/* + * MPC8313E RDB Device Tree Source + * + * Copyright 2005, 2006, 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/ { + model = "MPC8313ERDB"; + compatible = "MPC83xx"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8313@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <4000>; // L1, 16K + i-cache-size = <4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + 32-bit; + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 08000000>; // 128MB at 0 + }; + + soc8313@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = ; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <200 100>; + }; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = ; + interrupt-parent = <700>; + dfsrr; + }; + + i2c@3100 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3100 100>; + interrupts = ; + interrupt-parent = <700>; + dfsrr; + }; + + spi@7000 { + device_type = "spi"; + compatible = "mpc83xx_spi"; + reg = <7000 1000>; + interrupts = <10 8>; + interrupt-parent = <700>; + mode = <0>; + }; + + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + device_type = "usb"; + compatible = "fsl-usb2-dr"; + reg = <23000 1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <700>; + interrupts = <26 2>; + phy_type = "utmi_wide"; + }; + + mdio@24520 { + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <24520>; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <700>; + interrupts = <13 2>; + reg = <1>; + device_type = "ethernet-phy"; + }; + ethernet-phy@4 { + linux,phandle = <2452004>; + interrupt-parent = <700>; + interrupts = <14 2>; + reg = <4>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <25 8 24 8 23 8>; + interrupt-parent = <700>; + phy-handle = <2452001>; + }; + + ethernet@25000 { + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <22 8 21 8 20 8>; + interrupt-parent = <700>; + phy-handle = <2452004>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; + interrupts = <9 8>; + interrupt-parent = <700>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; + interrupts = ; + interrupt-parent = <700>; + }; + + pci@8500 { + interrupt-map-mask = ; + interrupt-map = < + + /* IDSEL 0x0E -mini PCI */ + 7000 0 0 1 700 12 8 + 7000 0 0 2 700 12 8 + 7000 0 0 3 700 12 8 + 7000 0 0 4 700 12 8 + + /* IDSEL 0x0F - PCI slot */ + 7800 0 0 1 700 11 8 + 7800 0 0 2 700 12 8 + 7800 0 0 3 700 11 8 + 7800 0 0 4 700 12 8>; + interrupt-parent = <700>; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 90000000 90000000 0 10000000 + 42000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8500 100>; + compatible = "83xx"; + device_type = "pci"; + }; + + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 7000>; + interrupts = ; + interrupt-parent = <700>; + /* Rev. 2.2 */ + num-channels = <1>; + channel-fifo-len = <18>; + exec-units-mask = <0000004c>; + descriptor-types-mask = <0122003f>; + }; + + /* IPIC + * interrupts cell = + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + pic@700 { + linux,phandle = <700>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <700 100>; + built-in; + device_type = "ipic"; + }; + }; +}; diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index edcd5b8..46883c5 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -5,6 +5,12 @@ choice prompt "Machine Type" default MPC834x_SYS +config MPC8313_RDB + bool "Freescale MPC8313 RDB" + select DEFAULT_UIMAGE + help + This option enables support for the MPC8313 RDB board. + config MPC832x_MDS bool "Freescale MPC832x MDS" select DEFAULT_UIMAGE @@ -41,6 +47,12 @@ config MPC8360E_PB endchoice +config PPC_MPC831x + bool + select PPC_UDBG_16550 + select PPC_INDIRECT_PCI + default y if MPC8313_RDB + config PPC_MPC832x bool select PPC_UDBG_16550 diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile index f1aa7e2..0b732a7 100644 --- a/arch/powerpc/platforms/83xx/Makefile +++ b/arch/powerpc/platforms/83xx/Makefile @@ -3,6 +3,7 @@ # obj-y := misc.o obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_MPC8313_RDB) += mpc8313_rdb.o obj-$(CONFIG_MPC834x_SYS) += mpc834x_sys.o obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o obj-$(CONFIG_MPC8360E_PB) += mpc8360e_pb.o diff --git a/arch/powerpc/platforms/83xx/mpc8313_rdb.c b/arch/powerpc/platforms/83xx/mpc8313_rdb.c new file mode 100644 index 0000000..c3b98c3 --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc8313_rdb.c @@ -0,0 +1,99 @@ +/* + * arch/powerpc/platforms/83xx/mpc8313_rdb.c + * + * Description: MPC8313x RDB board specific routines. + * This file is based on mpc834x_sys.c + * Author: Lo Wlison + * + * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include + +#include +#include +#include + +#include "mpc83xx.h" + +#undef DEBUG +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +#endif + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init mpc8313_rdb_setup_arch(void) +{ + struct device_node *np; + + if (ppc_md.progress) + ppc_md.progress("mpc8313_rdb_setup_arch()", 0); + +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + add_bridge(np); + + ppc_md.pci_exclude_device = mpc83xx_exclude_device; +#endif +} + +void __init mpc8313_rdb_init_IRQ(void) +{ + struct device_node *np; + + np = of_find_node_by_type(NULL, "ipic"); + if (!np) + return; + + ipic_init(np, 0); + + /* Initialize the default interrupt mapping priorities, + * in case the boot rom changed something on us. + */ + ipic_set_default_priority(); +} + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc8313_rdb_probe(void) +{ + char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), + "model", NULL); + if (model == NULL) + return 0; + if (strcmp(model, "MPC8313ERDB")) + return 0; + + DBG("MPC8313 RDB found\n"); + + return 1; +} + +define_machine(mpc8313_rdb) { + .name = "MPC8313 RDB", + .probe = mpc8313_rdb_probe, + .setup_arch = mpc8313_rdb_setup_arch, + .init_IRQ = mpc8313_rdb_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; -- cgit v0.10.2 From fd9aeb85273e9eb4d1a0b83487576a2e22da67fc Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 7 Feb 2007 22:19:45 -0600 Subject: [POWERPC] 83xx: add the mpc8313erdb defconfig Add the mpc8313erdb defconfig Signed-off-by: Wilson Lo Signed-off-by: Scott Wood Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala diff --git a/arch/powerpc/configs/mpc8313_rdb_defconfig b/arch/powerpc/configs/mpc8313_rdb_defconfig new file mode 100644 index 0000000..f875237 --- /dev/null +++ b/arch/powerpc/configs/mpc8313_rdb_defconfig @@ -0,0 +1,1409 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20 +# Wed Feb 7 22:08:04 2007 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_82xx is not set +CONFIG_PPC_83xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_86xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_6xx=y +CONFIG_83xx=y +CONFIG_PPC_FPU=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_SMP is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_PPC_GEN550=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Platform support +# +CONFIG_MPC8313_RDB=y +# CONFIG_MPC832x_MDS is not set +# CONFIG_MPC834x_SYS is not set +# CONFIG_MPC834x_ITX is not set +# CONFIG_MPC8360E_PB is not set +CONFIG_PPC_MPC831x=y +# CONFIG_MPIC is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_PARTITIONS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0xfe000000 +CONFIG_MTD_PHYSMAP_LEN=0x1000000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PHYSMAP_OF is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_NAND_CAFE is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID456 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set +# CONFIG_BLK_DEV_DM is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +CONFIG_CICADA_PHY=y +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y +# CONFIG_QLA3XXX is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_83xx_WDT=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y +CONFIG_SPI_MPC83xx=y + +# +# SPI Protocol Masters +# + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +CONFIG_USB_GADGET_NET2280=y +CONFIG_USB_NET2280=y +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y + +# +# RTC drivers +# +# CONFIG_RTC_DRV_X1205 is not set +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# DMA Engine support +# +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +CONFIG_NET_DMA=y + +# +# DMA Devices +# +CONFIG_INTEL_IOATDMA=y + +# +# Virtualization +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUGGER is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# -- cgit v0.10.2 From ea5b7a61b606854bd17272cb0a751b6d0a8bfa6b Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 7 Feb 2007 13:51:09 +0800 Subject: [POWERPC] 83xx: Added new dr_mode property for usb controller on 83xx Added a new dr_mode property to describe what mode the DR controller is being used in (host, device, OTG). Updated the MPC8349E MDS dts with this new property. Signed-off-by: Li Yang Signed-off-by: Kumar Gala diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 3399427..3b51467 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -1334,6 +1334,9 @@ platforms are moved over to use the flattened-device-tree model. fsl-usb2-mph compatible controllers. Either this property or "port0" (or both) must be defined for "fsl-usb2-mph" compatible controllers. + - dr_mode : indicates the working mode for "fsl-usb2-dr" compatible + controllers. Can be "host", "peripheral", or "otg". Default to + "host" if not defined for backward compatibility. Recommended properties : - interrupts : where a is the interrupt number and b is a @@ -1367,6 +1370,7 @@ platforms are moved over to use the flattened-device-tree model. #size-cells = <0>; interrupt-parent = <700>; interrupts = <26 1>; + dr_mode = "otg"; phy = "ulpi"; }; diff --git a/arch/powerpc/boot/dts/mpc8349emds.dts b/arch/powerpc/boot/dts/mpc8349emds.dts index efceb34..dc121b3 100644 --- a/arch/powerpc/boot/dts/mpc8349emds.dts +++ b/arch/powerpc/boot/dts/mpc8349emds.dts @@ -39,6 +39,11 @@ reg = <00000000 10000000>; // 256MB at 0 }; + bcsr@e2400000 { + device_type = "board-control"; + reg = ; + }; + soc8349@e0000000 { #address-cells = <1>; #size-cells = <1>; @@ -103,6 +108,7 @@ #size-cells = <0>; interrupt-parent = <700>; interrupts = <26 2>; + dr_mode = "otg"; phy_type = "ulpi"; }; -- cgit v0.10.2 From c161698287f501e7ea229672383af7aefe8a2056 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 7 Feb 2007 13:47:56 +0800 Subject: [POWERPC] 83xx: Add USB setup code for MPC8349E MDS-PB Add board specific initialization code for USB to work in both MPH and DR mode for MPC8349E MDS-PB board. Signed-off-by: Li Yang Signed-off-by: Kumar Gala diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.c b/arch/powerpc/platforms/83xx/mpc834x_sys.c index f30393f..873ec54 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_sys.c +++ b/arch/powerpc/platforms/83xx/mpc834x_sys.c @@ -43,6 +43,76 @@ unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; #endif +#define BCSR5_INT_USB 0x02 +/* Note: This is only for PB, not for PB+PIB + * On PB only port0 is connected using ULPI */ +static int mpc834x_usb_cfg(void) +{ + unsigned long sccr, sicrl; + void __iomem *immap; + void __iomem *bcsr_regs = NULL; + u8 bcsr5; + struct device_node *np = NULL; + int port0_is_dr = 0; + + if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-dr")) != NULL) + port0_is_dr = 1; + if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-mph")) != NULL){ + if (port0_is_dr) { + printk(KERN_WARNING + "There is only one USB port on PB board! \n"); + return -1; + } else if (!port0_is_dr) + /* No usb port enabled */ + return -1; + } + + immap = ioremap(get_immrbase(), 0x1000); + if (!immap) + return -1; + + /* Configure clock */ + sccr = in_be32(immap + MPC83XX_SCCR_OFFS); + if (port0_is_dr) + sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */ + else + sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */ + out_be32(immap + MPC83XX_SCCR_OFFS, sccr); + + /* Configure Pin */ + sicrl = in_be32(immap + MPC83XX_SICRL_OFFS); + /* set port0 only */ + if (port0_is_dr) + sicrl |= MPC83XX_SICRL_USB0; + else + sicrl &= ~(MPC83XX_SICRL_USB0); + out_be32(immap + MPC83XX_SICRL_OFFS, sicrl); + + iounmap(immap); + + /* Map BCSR area */ + np = of_find_node_by_name(NULL, "bcsr"); + if (np != 0) { + struct resource res; + + of_address_to_resource(np, 0, &res); + bcsr_regs = ioremap(res.start, res.end - res.start + 1); + of_node_put(np); + } + if (!bcsr_regs) + return -1; + + /* + * if SYS board is plug into PIB board, + * force to use the PHY on SYS board + */ + bcsr5 = in_8(bcsr_regs + 5); + if (!(bcsr5 & BCSR5_INT_USB)) + out_8(bcsr_regs + 5, (bcsr5 | BCSR5_INT_USB)); + iounmap(bcsr_regs); + return 0; +} + /* ************************************************************************ * * Setup the architecture @@ -65,6 +135,7 @@ static void __init mpc834x_sys_setup_arch(void) loops_per_jiffy = 50000000 / HZ; of_node_put(np); } + #ifdef CONFIG_PCI for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); @@ -72,6 +143,8 @@ static void __init mpc834x_sys_setup_arch(void) ppc_md.pci_exclude_device = mpc83xx_exclude_device; #endif + mpc834x_usb_cfg(); + #ifdef CONFIG_ROOT_NFS ROOT_DEV = Root_NFS; #else diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h index 01cae10..9cd03b5 100644 --- a/arch/powerpc/platforms/83xx/mpc83xx.h +++ b/arch/powerpc/platforms/83xx/mpc83xx.h @@ -4,6 +4,24 @@ #include #include +/* System Clock Control Register */ +#define MPC83XX_SCCR_OFFS 0xA08 +#define MPC83XX_SCCR_USB_MPHCM_11 0x00c00000 +#define MPC83XX_SCCR_USB_MPHCM_01 0x00400000 +#define MPC83XX_SCCR_USB_MPHCM_10 0x00800000 +#define MPC83XX_SCCR_USB_DRCM_11 0x00300000 +#define MPC83XX_SCCR_USB_DRCM_01 0x00100000 +#define MPC83XX_SCCR_USB_DRCM_10 0x00200000 + +/* system i/o configuration register low */ +#define MPC83XX_SICRL_OFFS 0x114 +#define MPC83XX_SICRL_USB0 0x40000000 +#define MPC83XX_SICRL_USB1 0x20000000 + +/* system i/o configuration register high */ +#define MPC83XX_SICRH_OFFS 0x118 +#define MPC83XX_SICRH_USB_UTMI 0x00020000 + /* * Declaration for the various functions exported by the * mpc83xx_* files. Mostly for use by mpc83xx_setup -- cgit v0.10.2 From 97c5a20ae68774b4c9246c4657be0d88317f103f Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 7 Feb 2007 13:49:24 +0800 Subject: [POWERPC] 83xx: Add platform_device for USB DR peripheral driver Add platform_device setup code for OTG/peripheral mode of 834x DR module. It is needed for USB client driver to work. Signed-off-by: Li Yang Signed-off-by: Kumar Gala diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 9f2a9a4..34161bc 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -441,7 +441,8 @@ static int __init fsl_usb_of_init(void) { struct device_node *np; unsigned int i; - struct platform_device *usb_dev_mph = NULL, *usb_dev_dr = NULL; + struct platform_device *usb_dev_mph = NULL, *usb_dev_dr_host = NULL, + *usb_dev_dr_client = NULL; int ret; for (np = NULL, i = 0; @@ -507,33 +508,72 @@ static int __init fsl_usb_of_init(void) of_irq_to_resource(np, 0, &r[1]); - usb_dev_dr = - platform_device_register_simple("fsl-ehci", i, r, 2); - if (IS_ERR(usb_dev_dr)) { - ret = PTR_ERR(usb_dev_dr); + prop = get_property(np, "dr_mode", NULL); + + if (!prop || !strcmp(prop, "host")) { + usb_data.operating_mode = FSL_USB2_DR_HOST; + usb_dev_dr_host = platform_device_register_simple( + "fsl-ehci", i, r, 2); + if (IS_ERR(usb_dev_dr_host)) { + ret = PTR_ERR(usb_dev_dr_host); + goto err; + } + } else if (prop && !strcmp(prop, "peripheral")) { + usb_data.operating_mode = FSL_USB2_DR_DEVICE; + usb_dev_dr_client = platform_device_register_simple( + "fsl-usb2-udc", i, r, 2); + if (IS_ERR(usb_dev_dr_client)) { + ret = PTR_ERR(usb_dev_dr_client); + goto err; + } + } else if (prop && !strcmp(prop, "otg")) { + usb_data.operating_mode = FSL_USB2_DR_OTG; + usb_dev_dr_host = platform_device_register_simple( + "fsl-ehci", i, r, 2); + if (IS_ERR(usb_dev_dr_host)) { + ret = PTR_ERR(usb_dev_dr_host); + goto err; + } + usb_dev_dr_client = platform_device_register_simple( + "fsl-usb2-udc", i, r, 2); + if (IS_ERR(usb_dev_dr_client)) { + ret = PTR_ERR(usb_dev_dr_client); + goto err; + } + } else { + ret = -EINVAL; goto err; } - usb_dev_dr->dev.coherent_dma_mask = 0xffffffffUL; - usb_dev_dr->dev.dma_mask = &usb_dev_dr->dev.coherent_dma_mask; - - usb_data.operating_mode = FSL_USB2_DR_HOST; - prop = get_property(np, "phy_type", NULL); usb_data.phy_mode = determine_usb_phy(prop); - ret = - platform_device_add_data(usb_dev_dr, &usb_data, - sizeof(struct - fsl_usb2_platform_data)); - if (ret) - goto unreg_dr; + if (usb_dev_dr_host) { + usb_dev_dr_host->dev.coherent_dma_mask = 0xffffffffUL; + usb_dev_dr_host->dev.dma_mask = &usb_dev_dr_host-> + dev.coherent_dma_mask; + if ((ret = platform_device_add_data(usb_dev_dr_host, + &usb_data, sizeof(struct + fsl_usb2_platform_data)))) + goto unreg_dr; + } + if (usb_dev_dr_client) { + usb_dev_dr_client->dev.coherent_dma_mask = 0xffffffffUL; + usb_dev_dr_client->dev.dma_mask = &usb_dev_dr_client-> + dev.coherent_dma_mask; + if ((ret = platform_device_add_data(usb_dev_dr_client, + &usb_data, sizeof(struct + fsl_usb2_platform_data)))) + goto unreg_dr; + } } return 0; unreg_dr: - if (usb_dev_dr) - platform_device_unregister(usb_dev_dr); + if (usb_dev_dr_host) + platform_device_unregister(usb_dev_dr_host); + if (usb_dev_dr_client) + platform_device_unregister(usb_dev_dr_client); unreg_mph: if (usb_dev_mph) platform_device_unregister(usb_dev_mph); @@ -699,7 +739,7 @@ static int __init fs_enet_of_init(void) if (ret) goto unreg; } - + of_node_put(phy); of_node_put(mdio); -- cgit v0.10.2 From 595dcfecf642c8b0772989ed46f15ee03c25a205 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 8 Feb 2007 18:11:42 +0000 Subject: [CIFS] POSIX CIFS Extensions (continued) - POSIX Open Signed-off-by: Steve French diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES index 85e3850..a1fb03f 100644 --- a/fs/cifs/CHANGES +++ b/fs/cifs/CHANGES @@ -1,6 +1,8 @@ Version 1.47 ------------ Fix oops in list_del during mount caused by unaligned string. +Fix file corruption which could occur on some large file +copies caused by writepages page i/o completion bug. Seek to SEEK_END forces check for update of file size for non-cached files. diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h index 2920ea0..529a000 100644 --- a/fs/cifs/cifspdu.h +++ b/fs/cifs/cifspdu.h @@ -796,6 +796,8 @@ typedef struct smb_com_openx_rsp { __u16 ByteCount; } __attribute__((packed)) OPENX_RSP; +/* For encoding of POSIX Open Request - see trans2 function 0x209 data struct */ + /* Legacy write request for older servers */ typedef struct smb_com_writex_req { struct smb_hdr hdr; /* wct = 12 */ @@ -2096,6 +2098,19 @@ struct cifs_posix_acl { /* access conrol list (ACL) */ /* end of POSIX ACL definitions */ +typedef struct { + __u32 OpenFlags; /* same as NT CreateX */ + __u32 PosixOpenFlags; + __u32 Mode; + __u16 Level; /* reply level requested (see QPathInfo levels) */ + __u16 Pad; /* reserved - MBZ */ +} __attribute__((packed)) OPEN_PSX_REQ; /* level 0x209 SetPathInfo data */ + +typedef struct { + /* reply varies based on requested level */ +} __atribute__((packed)) OPEN_PSX_RSP; /* level 0x209 SetPathInfo data */ + + struct file_internal_info { __u64 UniqueId; /* inode number */ } __attribute__((packed)); /* level 0x3ee */ -- cgit v0.10.2 From 7ba526316ae122e60c0c7a40793491f71b9ec590 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 8 Feb 2007 18:14:13 +0000 Subject: [CIFS] Allow update of EOF on remote extend of file Signed-off-by: Steve French diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index f1f8225..1108f17 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -57,7 +57,7 @@ extern int SendReceiveBlockingLock(const unsigned int /* xid */ , int * /* bytes returned */); extern int checkSMB(struct smb_hdr *smb, __u16 mid, unsigned int length); extern int is_valid_oplock_break(struct smb_hdr *smb, struct TCP_Server_Info *); -extern int is_size_safe_to_change(struct cifsInodeInfo *); +extern int is_size_safe_to_change(struct cifsInodeInfo *, __u64 eof); extern struct cifsFileInfo *find_writable_file(struct cifsInodeInfo *); extern unsigned int smbCalcSize(struct smb_hdr *ptr); extern unsigned int smbCalcSize_LE(struct smb_hdr *ptr); diff --git a/fs/cifs/file.c b/fs/cifs/file.c index e9dcf5e..07ff935 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -1954,7 +1954,7 @@ static int cifs_readpage(struct file *file, struct page *page) refreshing the inode only on increases in the file size but this is tricky to do without racing with writebehind page caching in the current Linux kernel design */ -int is_size_safe_to_change(struct cifsInodeInfo *cifsInode) +int is_size_safe_to_change(struct cifsInodeInfo *cifsInode, __u64 end_of_file) { struct cifsFileInfo *open_file = NULL; @@ -1976,6 +1976,9 @@ int is_size_safe_to_change(struct cifsInodeInfo *cifsInode) return 1; } + if(i_size_read(&cifsInode->vfs_inode) < end_of_file) + return 1; + return 0; } else return 1; diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index c4fa91b..3f5bc83 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -140,7 +140,7 @@ int cifs_get_inode_info_unix(struct inode **pinode, inode->i_gid = le64_to_cpu(findData.Gid); inode->i_nlink = le64_to_cpu(findData.Nlinks); - if (is_size_safe_to_change(cifsInfo)) { + if (is_size_safe_to_change(cifsInfo, end_of_file)) { /* can not safely change the file size here if the client is writing to it due to potential races */ @@ -491,8 +491,8 @@ int cifs_get_inode_info(struct inode **pinode, /* BB add code here - validate if device or weird share or device type? */ } - if (is_size_safe_to_change(cifsInfo)) { - /* can not safely change the file size here if the + if (is_size_safe_to_change(cifsInfo, le64_to_cpu(pfindData->EndOfFile))) { + /* can not safely shrink the file size here if the client is writing to it due to potential races */ i_size_write(inode,le64_to_cpu(pfindData->EndOfFile)); diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c index 782940b..c6220bd 100644 --- a/fs/cifs/readdir.c +++ b/fs/cifs/readdir.c @@ -222,7 +222,7 @@ static void fill_in_inode(struct inode *tmp_inode, int new_buf_type, atomic_set(&cifsInfo->inUse, 1); } - if (is_size_safe_to_change(cifsInfo)) { + if (is_size_safe_to_change(cifsInfo, end_of_file)) { /* can not safely change the file size here if the client is writing to it due to potential races */ i_size_write(tmp_inode, end_of_file); @@ -351,10 +351,10 @@ static void unix_fill_in_inode(struct inode *tmp_inode, tmp_inode->i_gid = le64_to_cpu(pfindData->Gid); tmp_inode->i_nlink = le64_to_cpu(pfindData->Nlinks); - if (is_size_safe_to_change(cifsInfo)) { + if (is_size_safe_to_change(cifsInfo, end_of_file)) { /* can not safely change the file size here if the client is writing to it due to potential races */ - i_size_write(tmp_inode,end_of_file); + i_size_write(tmp_inode, end_of_file); /* 512 bytes (2**9) is the fake blocksize that must be used */ /* for this calculation, not the real blocksize */ -- cgit v0.10.2 From 8f34f6cfa27ddae8faf10aef986db2fda1ba6791 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Thu, 8 Feb 2007 10:47:31 -0600 Subject: [POWERPC] QE: Rename ucc_slow_info.us_regs to ucc_slow_info.regs Rename the 'us_regs' field of the ucc_slow_info structure in ucc_slow.h to just 'regs'. The equivalent field in the ucc_fast_info structure is also called 'regs', so this patch makes them comparable, and makes the code a little easier to read, because there already is a 'us_regs' in another ucc_slow structure. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c index 47b5620..0e97e5c 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c +++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c @@ -179,7 +179,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc uccs->us_info = us_info; uccs->saved_uccm = 0; uccs->p_rx_frame = 0; - uccs->us_regs = us_info->us_regs; + uccs->us_regs = us_info->regs; us_regs = uccs->us_regs; uccs->p_ucce = (u16 *) & (us_regs->ucce); uccs->p_uccm = (u16 *) & (us_regs->uccm); @@ -206,7 +206,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc uccs->us_pram = qe_muram_addr(uccs->us_pram_offset); /* Init Guemr register */ - if ((ret = ucc_init_guemr((struct ucc_common *) (us_info->us_regs)))) { + if ((ret = ucc_init_guemr((struct ucc_common *) (us_info->regs)))) { uccs_err("ucc_slow_init: Could not init the guemr register."); ucc_slow_free(uccs); return ret; @@ -214,7 +214,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc /* Set UCC to slow type */ if ((ret = ucc_set_type(us_info->ucc_num, - (struct ucc_common *) (us_info->us_regs), + (struct ucc_common *) (us_info->regs), UCC_SPEED_TYPE_SLOW))) { uccs_err("ucc_slow_init: Could not init the guemr register."); ucc_slow_free(uccs); diff --git a/include/asm-powerpc/ucc_slow.h b/include/asm-powerpc/ucc_slow.h index ca93bc9..1babad9 100644 --- a/include/asm-powerpc/ucc_slow.h +++ b/include/asm-powerpc/ucc_slow.h @@ -150,7 +150,7 @@ struct ucc_slow_info { int ucc_num; enum qe_clock rx_clock; enum qe_clock tx_clock; - struct ucc_slow *us_regs; + struct ucc_slow *regs; int irq; u16 uccm_mask; int data_mem_part; -- cgit v0.10.2 From 8dabba5d1a8f1893bc3db9bf66007de2020c8b62 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 9 Feb 2007 09:30:05 -0600 Subject: [POWERPC] Fix is_power_of_4(x) compile error When building an 85xx kernel we get: CC arch/powerpc/mm/pgtable_32.o arch/powerpc/mm/pgtable_32.c: In function 'io_block_mapping': arch/powerpc/mm/pgtable_32.c:330: error: expected identifier before '(' token arch/powerpc/mm/pgtable_32.c:330: error: expected statement before ')' token The is_power_of_2(x) fixup patch left an extra ')' on the is_power_of_4 macro. There is a similiar issue on the arch/ppc side. Signed-off-by: Kumar Gala diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index bd02272..c284bda 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -295,7 +295,7 @@ void __init mapin_ram(void) } /* is x a power of 4? */ -#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1)) +#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1) /* * Set up a mapping for a block of I/O. diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c index 82b06a1..c023b72 100644 --- a/arch/ppc/mm/pgtable.c +++ b/arch/ppc/mm/pgtable.c @@ -314,7 +314,7 @@ void __init mapin_ram(void) } /* is x a power of 4? */ -#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1)) +#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1) /* * Set up a mapping for a block of I/O. -- cgit v0.10.2 From 27630bec9478a2dd387c68b5e435ed3fdd3a513e Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 9 Feb 2007 09:30:45 -0600 Subject: [POWERPC] 85xx: Marked functions static Marked a number of functions in 85xx board code as static. Also, some minor whitespace cleanup Signed-off-by: Kumar Gala diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index bda2e55..c56fce5 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -45,8 +45,7 @@ unsigned long isa_mem_base = 0; #endif #ifdef CONFIG_PCI -int -mpc85xx_exclude_device(u_char bus, u_char devfn) +static int mpc85xx_exclude_device(u_char bus, u_char devfn) { if (bus == 0 && PCI_SLOT(devfn) == 0) return PCIBIOS_DEVICE_NOT_FOUND; @@ -69,7 +68,7 @@ static void cpm2_cascade(unsigned int irq, struct irq_desc *desc) #endif /* CONFIG_CPM2 */ -void __init mpc85xx_ads_pic_init(void) +static void __init mpc85xx_ads_pic_init(void) { struct mpic *mpic; struct resource r; @@ -254,7 +253,7 @@ static void __init mpc85xx_ads_setup_arch(void) #endif } -void mpc85xx_ads_show_cpuinfo(struct seq_file *m) +static void mpc85xx_ads_show_cpuinfo(struct seq_file *m) { uint pvid, svid, phid1; uint memsize = total_memory; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c index 953cd5d..abc0aca 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c @@ -56,7 +56,6 @@ unsigned long isa_mem_base = 0; static int cds_pci_slot = 2; static volatile u8 *cadmus; - #ifdef CONFIG_PCI #define ARCADIA_HOST_BRIDGE_IDSEL 17 @@ -64,8 +63,7 @@ static volatile u8 *cadmus; extern int mpc85xx_pci2_busno; -int -mpc85xx_exclude_device(u_char bus, u_char devfn) +static int mpc85xx_exclude_device(u_char bus, u_char devfn) { if (bus == 0 && PCI_SLOT(devfn) == 0) return PCIBIOS_DEVICE_NOT_FOUND; @@ -81,8 +79,7 @@ mpc85xx_exclude_device(u_char bus, u_char devfn) return PCIBIOS_SUCCESSFUL; } -void __init -mpc85xx_cds_pcibios_fixup(void) +static void __init mpc85xx_cds_pcibios_fixup(void) { struct pci_dev *dev; u_char c; @@ -144,7 +141,7 @@ static void mpc85xx_8259_cascade(unsigned int irq, struct irq_desc *desc) #endif /* PPC_I8259 */ #endif /* CONFIG_PCI */ -void __init mpc85xx_cds_pic_init(void) +static void __init mpc85xx_cds_pic_init(void) { struct mpic *mpic; struct resource r; @@ -224,12 +221,10 @@ void __init mpc85xx_cds_pic_init(void) #endif /* CONFIG_PPC_I8259 */ } - /* * Setup the architecture */ -static void __init -mpc85xx_cds_setup_arch(void) +static void __init mpc85xx_cds_setup_arch(void) { struct device_node *cpu; #ifdef CONFIG_PCI @@ -276,9 +271,7 @@ mpc85xx_cds_setup_arch(void) #endif } - -void -mpc85xx_cds_show_cpuinfo(struct seq_file *m) +static void mpc85xx_cds_show_cpuinfo(struct seq_file *m) { uint pvid, svid, phid1; uint memsize = total_memory; -- cgit v0.10.2 From 862a7284980d809a583e9a34c774fab84e0a46f8 Mon Sep 17 00:00:00 2001 From: Rojhalat Ibrahim Date: Fri, 9 Feb 2007 15:10:38 +0100 Subject: [PPC] Fix compile error for e500 core based processors We get the following compiler error: CC arch/ppc/kernel/ppc_ksyms.o arch/ppc/kernel/ppc_ksyms.c:275: error: '__mtdcr' undeclared here (not in a function) arch/ppc/kernel/ppc_ksyms.c:275: warning: type defaults to 'int' in declaration of '__mtdcr' arch/ppc/kernel/ppc_ksyms.c:276: error: '__mfdcr' undeclared here (not in a function) arch/ppc/kernel/ppc_ksyms.c:276: warning: type defaults to 'int' in declaration of '__mfdcr' make[1]: *** [arch/ppc/kernel/ppc_ksyms.o] Error 1 This is due to the EXPORT_SYMBOL for __mtdcr/__mfdcr not having the proper CONFIG protection Signed-off-by: Rojhalat Ibrahim Signed-off-by: Kumar Gala diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index 1f49503..1318b6f 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -271,7 +271,7 @@ EXPORT_SYMBOL(mmu_hash_lock); /* For MOL */ extern long *intercept_table; EXPORT_SYMBOL(intercept_table); #endif /* CONFIG_PPC_STD_MMU */ -#if defined(CONFIG_40x) || defined(CONFIG_BOOKE) +#ifdef CONFIG_PPC_DCR_NATIVE EXPORT_SYMBOL(__mtdcr); EXPORT_SYMBOL(__mfdcr); #endif -- cgit v0.10.2 From 49baa91d6863df480fa05eb57524a274f77fa886 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 8 Feb 2007 01:11:00 -0600 Subject: [POWERPC] 83xx: Updated and renamed MPC834x SYS to MPC834x MDS The MPC834x SYS board has always been called the MPC834x MDS since its public release. Removed all references to SYS and replaced with MDS. Additionally renamed the .dts to match the defconfig (mpc834x_mds*). Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/mpc8349emds.dts b/arch/powerpc/boot/dts/mpc8349emds.dts deleted file mode 100644 index dc121b3..0000000 --- a/arch/powerpc/boot/dts/mpc8349emds.dts +++ /dev/null @@ -1,334 +0,0 @@ -/* - * MPC8349E MDS Device Tree Source - * - * Copyright 2005, 2006 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/ { - model = "MPC8349EMDS"; - compatible = "MPC834xMDS"; - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #cpus = <1>; - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8349@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K - timebase-frequency = <0>; // from bootloader - bus-frequency = <0>; // from bootloader - clock-frequency = <0>; // from bootloader - 32-bit; - }; - }; - - memory { - device_type = "memory"; - reg = <00000000 10000000>; // 256MB at 0 - }; - - bcsr@e2400000 { - device_type = "board-control"; - reg = ; - }; - - soc8349@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = ; - bus-frequency = <0>; - - wdt@200 { - device_type = "watchdog"; - compatible = "mpc83xx_wdt"; - reg = <200 100>; - }; - - i2c@3000 { - device_type = "i2c"; - compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = ; - interrupt-parent = <700>; - dfsrr; - }; - - i2c@3100 { - device_type = "i2c"; - compatible = "fsl-i2c"; - reg = <3100 100>; - interrupts = ; - interrupt-parent = <700>; - dfsrr; - }; - - spi@7000 { - device_type = "spi"; - compatible = "mpc83xx_spi"; - reg = <7000 1000>; - interrupts = <10 8>; - interrupt-parent = <700>; - mode = <0>; - }; - - /* phy type (ULPI or SERIAL) are only types supportted for MPH */ - /* port = 0 or 1 */ - usb@22000 { - device_type = "usb"; - compatible = "fsl-usb2-mph"; - reg = <22000 1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <700>; - interrupts = <27 2>; - phy_type = "ulpi"; - port1; - }; - /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ - usb@23000 { - device_type = "usb"; - compatible = "fsl-usb2-dr"; - reg = <23000 1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <700>; - interrupts = <26 2>; - dr_mode = "otg"; - phy_type = "ulpi"; - }; - - mdio@24520 { - device_type = "mdio"; - compatible = "gianfar"; - reg = <24520 20>; - #address-cells = <1>; - #size-cells = <0>; - linux,phandle = <24520>; - ethernet-phy@0 { - linux,phandle = <2452000>; - interrupt-parent = <700>; - interrupts = <11 2>; - reg = <0>; - device_type = "ethernet-phy"; - }; - ethernet-phy@1 { - linux,phandle = <2452001>; - interrupt-parent = <700>; - interrupts = <12 2>; - reg = <1>; - device_type = "ethernet-phy"; - }; - }; - - ethernet@24000 { - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <24000 1000>; - address = [ 00 00 00 00 00 00 ]; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <20 8 21 8 22 8>; - interrupt-parent = <700>; - phy-handle = <2452000>; - }; - - ethernet@25000 { - #address-cells = <1>; - #size-cells = <0>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <25000 1000>; - address = [ 00 00 00 00 00 00 ]; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <23 8 24 8 25 8>; - interrupt-parent = <700>; - phy-handle = <2452001>; - }; - - serial@4500 { - device_type = "serial"; - compatible = "ns16550"; - reg = <4500 100>; - clock-frequency = <0>; - interrupts = <9 8>; - interrupt-parent = <700>; - }; - - serial@4600 { - device_type = "serial"; - compatible = "ns16550"; - reg = <4600 100>; - clock-frequency = <0>; - interrupts = ; - interrupt-parent = <700>; - }; - - pci@8500 { - interrupt-map-mask = ; - interrupt-map = < - - /* IDSEL 0x11 */ - 8800 0 0 1 700 14 8 - 8800 0 0 2 700 15 8 - 8800 0 0 3 700 16 8 - 8800 0 0 4 700 17 8 - - /* IDSEL 0x12 */ - 9000 0 0 1 700 16 8 - 9000 0 0 2 700 17 8 - 9000 0 0 3 700 14 8 - 9000 0 0 4 700 15 8 - - /* IDSEL 0x13 */ - 9800 0 0 1 700 17 8 - 9800 0 0 2 700 14 8 - 9800 0 0 3 700 15 8 - 9800 0 0 4 700 16 8 - - /* IDSEL 0x15 */ - a800 0 0 1 700 14 8 - a800 0 0 2 700 15 8 - a800 0 0 3 700 16 8 - a800 0 0 4 700 17 8 - - /* IDSEL 0x16 */ - b000 0 0 1 700 17 8 - b000 0 0 2 700 14 8 - b000 0 0 3 700 15 8 - b000 0 0 4 700 16 8 - - /* IDSEL 0x17 */ - b800 0 0 1 700 16 8 - b800 0 0 2 700 17 8 - b800 0 0 3 700 14 8 - b800 0 0 4 700 15 8 - - /* IDSEL 0x18 */ - c000 0 0 1 700 15 8 - c000 0 0 2 700 16 8 - c000 0 0 3 700 17 8 - c000 0 0 4 700 14 8>; - interrupt-parent = <700>; - interrupts = <42 8>; - bus-range = <0 0>; - ranges = <02000000 0 a0000000 a0000000 0 10000000 - 42000000 0 80000000 80000000 0 10000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8500 100>; - compatible = "83xx"; - device_type = "pci"; - }; - - pci@8600 { - interrupt-map-mask = ; - interrupt-map = < - - /* IDSEL 0x11 */ - 8800 0 0 1 700 14 8 - 8800 0 0 2 700 15 8 - 8800 0 0 3 700 16 8 - 8800 0 0 4 700 17 8 - - /* IDSEL 0x12 */ - 9000 0 0 1 700 16 8 - 9000 0 0 2 700 17 8 - 9000 0 0 3 700 14 8 - 9000 0 0 4 700 15 8 - - /* IDSEL 0x13 */ - 9800 0 0 1 700 17 8 - 9800 0 0 2 700 14 8 - 9800 0 0 3 700 15 8 - 9800 0 0 4 700 16 8 - - /* IDSEL 0x15 */ - a800 0 0 1 700 14 8 - a800 0 0 2 700 15 8 - a800 0 0 3 700 16 8 - a800 0 0 4 700 17 8 - - /* IDSEL 0x16 */ - b000 0 0 1 700 17 8 - b000 0 0 2 700 14 8 - b000 0 0 3 700 15 8 - b000 0 0 4 700 16 8 - - /* IDSEL 0x17 */ - b800 0 0 1 700 16 8 - b800 0 0 2 700 17 8 - b800 0 0 3 700 14 8 - b800 0 0 4 700 15 8 - - /* IDSEL 0x18 */ - c000 0 0 1 700 15 8 - c000 0 0 2 700 16 8 - c000 0 0 3 700 17 8 - c000 0 0 4 700 14 8>; - interrupt-parent = <700>; - interrupts = <42 8>; - bus-range = <0 0>; - ranges = <02000000 0 b0000000 b0000000 0 10000000 - 42000000 0 90000000 90000000 0 10000000 - 01000000 0 00000000 e2100000 0 00100000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8600 100>; - compatible = "83xx"; - device_type = "pci"; - }; - - /* May need to remove if on a part without crypto engine */ - crypto@30000 { - device_type = "crypto"; - model = "SEC2"; - compatible = "talitos"; - reg = <30000 10000>; - interrupts = ; - interrupt-parent = <700>; - num-channels = <4>; - channel-fifo-len = <18>; - exec-units-mask = <0000007e>; - /* desc mask is for rev2.0, - * we need runtime fixup for >2.0 */ - descriptor-types-mask = <01010ebf>; - }; - - /* IPIC - * interrupts cell = - * sense values match linux IORESOURCE_IRQ_* defines: - * sense == 8: Level, low assertion - * sense == 2: Edge, high-to-low change - */ - pic@700 { - linux,phandle = <700>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <700 100>; - built-in; - device_type = "ipic"; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts new file mode 100644 index 0000000..dc121b3 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -0,0 +1,334 @@ +/* + * MPC8349E MDS Device Tree Source + * + * Copyright 2005, 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/ { + model = "MPC8349EMDS"; + compatible = "MPC834xMDS"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8349@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + 32-bit; + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 10000000>; // 256MB at 0 + }; + + bcsr@e2400000 { + device_type = "board-control"; + reg = ; + }; + + soc8349@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = ; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <200 100>; + }; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = ; + interrupt-parent = <700>; + dfsrr; + }; + + i2c@3100 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3100 100>; + interrupts = ; + interrupt-parent = <700>; + dfsrr; + }; + + spi@7000 { + device_type = "spi"; + compatible = "mpc83xx_spi"; + reg = <7000 1000>; + interrupts = <10 8>; + interrupt-parent = <700>; + mode = <0>; + }; + + /* phy type (ULPI or SERIAL) are only types supportted for MPH */ + /* port = 0 or 1 */ + usb@22000 { + device_type = "usb"; + compatible = "fsl-usb2-mph"; + reg = <22000 1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <700>; + interrupts = <27 2>; + phy_type = "ulpi"; + port1; + }; + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + device_type = "usb"; + compatible = "fsl-usb2-dr"; + reg = <23000 1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <700>; + interrupts = <26 2>; + dr_mode = "otg"; + phy_type = "ulpi"; + }; + + mdio@24520 { + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <700>; + interrupts = <11 2>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <700>; + interrupts = <12 2>; + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <20 8 21 8 22 8>; + interrupt-parent = <700>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <23 8 24 8 25 8>; + interrupt-parent = <700>; + phy-handle = <2452001>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; + interrupts = <9 8>; + interrupt-parent = <700>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; + interrupts = ; + interrupt-parent = <700>; + }; + + pci@8500 { + interrupt-map-mask = ; + interrupt-map = < + + /* IDSEL 0x11 */ + 8800 0 0 1 700 14 8 + 8800 0 0 2 700 15 8 + 8800 0 0 3 700 16 8 + 8800 0 0 4 700 17 8 + + /* IDSEL 0x12 */ + 9000 0 0 1 700 16 8 + 9000 0 0 2 700 17 8 + 9000 0 0 3 700 14 8 + 9000 0 0 4 700 15 8 + + /* IDSEL 0x13 */ + 9800 0 0 1 700 17 8 + 9800 0 0 2 700 14 8 + 9800 0 0 3 700 15 8 + 9800 0 0 4 700 16 8 + + /* IDSEL 0x15 */ + a800 0 0 1 700 14 8 + a800 0 0 2 700 15 8 + a800 0 0 3 700 16 8 + a800 0 0 4 700 17 8 + + /* IDSEL 0x16 */ + b000 0 0 1 700 17 8 + b000 0 0 2 700 14 8 + b000 0 0 3 700 15 8 + b000 0 0 4 700 16 8 + + /* IDSEL 0x17 */ + b800 0 0 1 700 16 8 + b800 0 0 2 700 17 8 + b800 0 0 3 700 14 8 + b800 0 0 4 700 15 8 + + /* IDSEL 0x18 */ + c000 0 0 1 700 15 8 + c000 0 0 2 700 16 8 + c000 0 0 3 700 17 8 + c000 0 0 4 700 14 8>; + interrupt-parent = <700>; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 a0000000 0 10000000 + 42000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8500 100>; + compatible = "83xx"; + device_type = "pci"; + }; + + pci@8600 { + interrupt-map-mask = ; + interrupt-map = < + + /* IDSEL 0x11 */ + 8800 0 0 1 700 14 8 + 8800 0 0 2 700 15 8 + 8800 0 0 3 700 16 8 + 8800 0 0 4 700 17 8 + + /* IDSEL 0x12 */ + 9000 0 0 1 700 16 8 + 9000 0 0 2 700 17 8 + 9000 0 0 3 700 14 8 + 9000 0 0 4 700 15 8 + + /* IDSEL 0x13 */ + 9800 0 0 1 700 17 8 + 9800 0 0 2 700 14 8 + 9800 0 0 3 700 15 8 + 9800 0 0 4 700 16 8 + + /* IDSEL 0x15 */ + a800 0 0 1 700 14 8 + a800 0 0 2 700 15 8 + a800 0 0 3 700 16 8 + a800 0 0 4 700 17 8 + + /* IDSEL 0x16 */ + b000 0 0 1 700 17 8 + b000 0 0 2 700 14 8 + b000 0 0 3 700 15 8 + b000 0 0 4 700 16 8 + + /* IDSEL 0x17 */ + b800 0 0 1 700 16 8 + b800 0 0 2 700 17 8 + b800 0 0 3 700 14 8 + b800 0 0 4 700 15 8 + + /* IDSEL 0x18 */ + c000 0 0 1 700 15 8 + c000 0 0 2 700 16 8 + c000 0 0 3 700 17 8 + c000 0 0 4 700 14 8>; + interrupt-parent = <700>; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 b0000000 b0000000 0 10000000 + 42000000 0 90000000 90000000 0 10000000 + 01000000 0 00000000 e2100000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8600 100>; + compatible = "83xx"; + device_type = "pci"; + }; + + /* May need to remove if on a part without crypto engine */ + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 10000>; + interrupts = ; + interrupt-parent = <700>; + num-channels = <4>; + channel-fifo-len = <18>; + exec-units-mask = <0000007e>; + /* desc mask is for rev2.0, + * we need runtime fixup for >2.0 */ + descriptor-types-mask = <01010ebf>; + }; + + /* IPIC + * interrupts cell = + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + pic@700 { + linux,phandle = <700>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <700 100>; + built-in; + device_type = "ipic"; + }; + }; +}; diff --git a/arch/powerpc/configs/mpc834x_mds_defconfig b/arch/powerpc/configs/mpc834x_mds_defconfig index 9eaed3a..2e3f8ef 100644 --- a/arch/powerpc/configs/mpc834x_mds_defconfig +++ b/arch/powerpc/configs/mpc834x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc5 -# Fri Jan 26 00:19:27 2007 +# Linux kernel version: 2.6.20 +# Thu Feb 8 01:00:48 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -34,9 +34,9 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_PPC_83xx=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_86xx is not set +# CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set -# CONFIG_8xx is not set # CONFIG_E200 is not set CONFIG_6xx=y CONFIG_83xx=y @@ -128,8 +128,9 @@ CONFIG_PPC_GEN550=y # # Platform support # +# CONFIG_MPC8313_RDB is not set # CONFIG_MPC832x_MDS is not set -CONFIG_MPC834x_SYS=y +CONFIG_MPC834x_MDS=y # CONFIG_MPC834x_ITX is not set # CONFIG_MPC8360E_PB is not set CONFIG_MPC834x=y diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 46883c5..1aea1e6 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -3,7 +3,7 @@ menu "Platform support" choice prompt "Machine Type" - default MPC834x_SYS + default MPC834x_MDS config MPC8313_RDB bool "Freescale MPC8313 RDB" @@ -18,13 +18,13 @@ config MPC832x_MDS help This option enables support for the MPC832x MDS evaluation board. -config MPC834x_SYS - bool "Freescale MPC834x SYS" +config MPC834x_MDS + bool "Freescale MPC834x MDS" select DEFAULT_UIMAGE help - This option enables support for the MPC 834x SYS evaluation board. + This option enables support for the MPC 834x MDS evaluation board. - Be aware that PCI buses can only function when SYS board is plugged + Be aware that PCI buses can only function when MDS board is plugged into the PIB (Platform IO Board) board from Freescale which provide 3 PCI slots. The PIBs PCI initialization is the bootloader's responsibility. @@ -63,7 +63,7 @@ config MPC834x bool select PPC_UDBG_16550 select PPC_INDIRECT_PCI - default y if MPC834x_SYS || MPC834x_ITX + default y if MPC834x_MDS || MPC834x_ITX config PPC_MPC836x bool diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile index 0b732a7..6c8199c 100644 --- a/arch/powerpc/platforms/83xx/Makefile +++ b/arch/powerpc/platforms/83xx/Makefile @@ -4,7 +4,7 @@ obj-y := misc.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_MPC8313_RDB) += mpc8313_rdb.o -obj-$(CONFIG_MPC834x_SYS) += mpc834x_sys.o +obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o obj-$(CONFIG_MPC8360E_PB) += mpc8360e_pb.o obj-$(CONFIG_MPC832x_MDS) += mpc832x_mds.o diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c index 2446dea..443a317 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_itx.c +++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c @@ -38,8 +38,6 @@ #include "mpc83xx.h" -#include - #ifndef CONFIG_PCI unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c new file mode 100644 index 0000000..d2736da --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c @@ -0,0 +1,213 @@ +/* + * arch/powerpc/platforms/83xx/mpc834x_mds.c + * + * MPC834x MDS board specific routines + * + * Maintainer: Kumar Gala + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mpc83xx.h" + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +#endif + +#define BCSR5_INT_USB 0x02 +/* Note: This is only for PB, not for PB+PIB + * On PB only port0 is connected using ULPI */ +static int mpc834x_usb_cfg(void) +{ + unsigned long sccr, sicrl; + void __iomem *immap; + void __iomem *bcsr_regs = NULL; + u8 bcsr5; + struct device_node *np = NULL; + int port0_is_dr = 0; + + if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-dr")) != NULL) + port0_is_dr = 1; + if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-mph")) != NULL){ + if (port0_is_dr) { + printk(KERN_WARNING + "There is only one USB port on PB board! \n"); + return -1; + } else if (!port0_is_dr) + /* No usb port enabled */ + return -1; + } + + immap = ioremap(get_immrbase(), 0x1000); + if (!immap) + return -1; + + /* Configure clock */ + sccr = in_be32(immap + MPC83XX_SCCR_OFFS); + if (port0_is_dr) + sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */ + else + sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */ + out_be32(immap + MPC83XX_SCCR_OFFS, sccr); + + /* Configure Pin */ + sicrl = in_be32(immap + MPC83XX_SICRL_OFFS); + /* set port0 only */ + if (port0_is_dr) + sicrl |= MPC83XX_SICRL_USB0; + else + sicrl &= ~(MPC83XX_SICRL_USB0); + out_be32(immap + MPC83XX_SICRL_OFFS, sicrl); + + iounmap(immap); + + /* Map BCSR area */ + np = of_find_node_by_name(NULL, "bcsr"); + if (np != 0) { + struct resource res; + + of_address_to_resource(np, 0, &res); + bcsr_regs = ioremap(res.start, res.end - res.start + 1); + of_node_put(np); + } + if (!bcsr_regs) + return -1; + + /* + * if MDS board is plug into PIB board, + * force to use the PHY on MDS board + */ + bcsr5 = in_8(bcsr_regs + 5); + if (!(bcsr5 & BCSR5_INT_USB)) + out_8(bcsr_regs + 5, (bcsr5 | BCSR5_INT_USB)); + iounmap(bcsr_regs); + return 0; +} + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init mpc834x_mds_setup_arch(void) +{ + struct device_node *np; + + if (ppc_md.progress) + ppc_md.progress("mpc834x_mds_setup_arch()", 0); + + np = of_find_node_by_type(NULL, "cpu"); + if (np != 0) { + const unsigned int *fp = + get_property(np, "clock-frequency", NULL); + if (fp != 0) + loops_per_jiffy = *fp / HZ; + else + loops_per_jiffy = 50000000 / HZ; + of_node_put(np); + } + +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + add_bridge(np); + + ppc_md.pci_exclude_device = mpc83xx_exclude_device; +#endif + + mpc834x_usb_cfg(); + +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif +} + +static void __init mpc834x_mds_init_IRQ(void) +{ + struct device_node *np; + + np = of_find_node_by_type(NULL, "ipic"); + if (!np) + return; + + ipic_init(np, 0); + + /* Initialize the default interrupt mapping priorities, + * in case the boot rom changed something on us. + */ + ipic_set_default_priority(); +} + +#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374) +extern ulong ds1374_get_rtc_time(void); +extern int ds1374_set_rtc_time(ulong); + +static int __init mpc834x_rtc_hookup(void) +{ + struct timespec tv; + + ppc_md.get_rtc_time = ds1374_get_rtc_time; + ppc_md.set_rtc_time = ds1374_set_rtc_time; + + tv.tv_nsec = 0; + tv.tv_sec = (ppc_md.get_rtc_time) (); + do_settimeofday(&tv); + + return 0; +} + +late_initcall(mpc834x_rtc_hookup); +#endif + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc834x_mds_probe(void) +{ + /* We always match for now, eventually we should look at the flat + dev tree to ensure this is the board we are suppose to run on + */ + return 1; +} + +define_machine(mpc834x_mds) { + .name = "MPC834x MDS", + .probe = mpc834x_mds_probe, + .setup_arch = mpc834x_mds_setup_arch, + .init_IRQ = mpc834x_mds_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.c b/arch/powerpc/platforms/83xx/mpc834x_sys.c deleted file mode 100644 index 873ec54..0000000 --- a/arch/powerpc/platforms/83xx/mpc834x_sys.c +++ /dev/null @@ -1,213 +0,0 @@ -/* - * arch/powerpc/platforms/83xx/mpc834x_sys.c - * - * MPC834x SYS board specific routines - * - * Maintainer: Kumar Gala - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "mpc83xx.h" - -#ifndef CONFIG_PCI -unsigned long isa_io_base = 0; -unsigned long isa_mem_base = 0; -#endif - -#define BCSR5_INT_USB 0x02 -/* Note: This is only for PB, not for PB+PIB - * On PB only port0 is connected using ULPI */ -static int mpc834x_usb_cfg(void) -{ - unsigned long sccr, sicrl; - void __iomem *immap; - void __iomem *bcsr_regs = NULL; - u8 bcsr5; - struct device_node *np = NULL; - int port0_is_dr = 0; - - if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-dr")) != NULL) - port0_is_dr = 1; - if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-mph")) != NULL){ - if (port0_is_dr) { - printk(KERN_WARNING - "There is only one USB port on PB board! \n"); - return -1; - } else if (!port0_is_dr) - /* No usb port enabled */ - return -1; - } - - immap = ioremap(get_immrbase(), 0x1000); - if (!immap) - return -1; - - /* Configure clock */ - sccr = in_be32(immap + MPC83XX_SCCR_OFFS); - if (port0_is_dr) - sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */ - else - sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */ - out_be32(immap + MPC83XX_SCCR_OFFS, sccr); - - /* Configure Pin */ - sicrl = in_be32(immap + MPC83XX_SICRL_OFFS); - /* set port0 only */ - if (port0_is_dr) - sicrl |= MPC83XX_SICRL_USB0; - else - sicrl &= ~(MPC83XX_SICRL_USB0); - out_be32(immap + MPC83XX_SICRL_OFFS, sicrl); - - iounmap(immap); - - /* Map BCSR area */ - np = of_find_node_by_name(NULL, "bcsr"); - if (np != 0) { - struct resource res; - - of_address_to_resource(np, 0, &res); - bcsr_regs = ioremap(res.start, res.end - res.start + 1); - of_node_put(np); - } - if (!bcsr_regs) - return -1; - - /* - * if SYS board is plug into PIB board, - * force to use the PHY on SYS board - */ - bcsr5 = in_8(bcsr_regs + 5); - if (!(bcsr5 & BCSR5_INT_USB)) - out_8(bcsr_regs + 5, (bcsr5 | BCSR5_INT_USB)); - iounmap(bcsr_regs); - return 0; -} - -/* ************************************************************************ - * - * Setup the architecture - * - */ -static void __init mpc834x_sys_setup_arch(void) -{ - struct device_node *np; - - if (ppc_md.progress) - ppc_md.progress("mpc834x_sys_setup_arch()", 0); - - np = of_find_node_by_type(NULL, "cpu"); - if (np != 0) { - const unsigned int *fp = - get_property(np, "clock-frequency", NULL); - if (fp != 0) - loops_per_jiffy = *fp / HZ; - else - loops_per_jiffy = 50000000 / HZ; - of_node_put(np); - } - -#ifdef CONFIG_PCI - for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) - add_bridge(np); - - ppc_md.pci_exclude_device = mpc83xx_exclude_device; -#endif - - mpc834x_usb_cfg(); - -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif -} - -static void __init mpc834x_sys_init_IRQ(void) -{ - struct device_node *np; - - np = of_find_node_by_type(NULL, "ipic"); - if (!np) - return; - - ipic_init(np, 0); - - /* Initialize the default interrupt mapping priorities, - * in case the boot rom changed something on us. - */ - ipic_set_default_priority(); -} - -#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374) -extern ulong ds1374_get_rtc_time(void); -extern int ds1374_set_rtc_time(ulong); - -static int __init mpc834x_rtc_hookup(void) -{ - struct timespec tv; - - ppc_md.get_rtc_time = ds1374_get_rtc_time; - ppc_md.set_rtc_time = ds1374_set_rtc_time; - - tv.tv_nsec = 0; - tv.tv_sec = (ppc_md.get_rtc_time) (); - do_settimeofday(&tv); - - return 0; -} - -late_initcall(mpc834x_rtc_hookup); -#endif - -/* - * Called very early, MMU is off, device-tree isn't unflattened - */ -static int __init mpc834x_sys_probe(void) -{ - /* We always match for now, eventually we should look at the flat - dev tree to ensure this is the board we are suppose to run on - */ - return 1; -} - -define_machine(mpc834x_sys) { - .name = "MPC834x SYS", - .probe = mpc834x_sys_probe, - .setup_arch = mpc834x_sys_setup_arch, - .init_IRQ = mpc834x_sys_init_IRQ, - .get_irq = ipic_get_irq, - .restart = mpc83xx_restart, - .time_init = mpc83xx_time_init, - .calibrate_decr = generic_calibrate_decr, - .progress = udbg_progress, -}; diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.h b/arch/powerpc/platforms/83xx/mpc834x_sys.h deleted file mode 100644 index 7d5bbef..0000000 --- a/arch/powerpc/platforms/83xx/mpc834x_sys.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * arch/powerpc/platforms/83xx/mpc834x_sys.h - * - * MPC834X SYS common board definitions - * - * Maintainer: Kumar Gala - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __MACH_MPC83XX_SYS_H__ -#define __MACH_MPC83XX_SYS_H__ - -#define PIRQA MPC83xx_IRQ_EXT4 -#define PIRQB MPC83xx_IRQ_EXT5 -#define PIRQC MPC83xx_IRQ_EXT6 -#define PIRQD MPC83xx_IRQ_EXT7 - -#endif /* __MACH_MPC83XX_SYS_H__ */ -- cgit v0.10.2 From 8500adc79b15fa85b403dbf04aba3497c1f80e50 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Sun, 28 Jan 2007 23:31:08 +0100 Subject: [POWERPC] Update to linkstation / kurobox support Linkstation systems capable of running mainline kernels use u-boot as a bootloader, so, specifying a suitable kernel command is not a problem. Don't guess. Also extend linkstation_defconfig to support the linkstation HS model with a IT8212 IDE controller and kuroboxHD/HD-HLAN linkstation models with a tulip ethernet chip. The latter also require a slightly different .dts file, which is also included with this patch. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts new file mode 100644 index 0000000..096e94a --- /dev/null +++ b/arch/powerpc/boot/dts/kuroboxHD.dts @@ -0,0 +1,148 @@ +/* + * Device Tree Souce for Buffalo KuroboxHD + * + * Choose CONFIG_LINKSTATION to build a kernel for KuroboxHD, or use + * the default configuration linkstation_defconfig. + * + * Based on sandpoint.dts + * + * 2006 (c) G. Liakhovetski + * + * This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + +XXXX add flash parts, rtc, ?? + +build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts" + + + */ + +/ { + linux,phandle = <1000>; + model = "KuroboxHD"; + compatible = "linkstation"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + linux,phandle = <2000>; + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,603e { /* Really 8241 */ + linux,phandle = <2100>; + linux,boot-cpu; + device_type = "cpu"; + reg = <0>; + clock-frequency = ; /* Fixed by bootwrapper */ + timebase-frequency = <1743000>; /* Fixed by bootwrapper */ + bus-frequency = <0>; /* From bootloader */ + /* Following required by dtc but not used */ + i-cache-line-size = <0>; + d-cache-line-size = <0>; + i-cache-size = <4000>; + d-cache-size = <4000>; + }; + }; + + memory { + linux,phandle = <3000>; + device_type = "memory"; + reg = <00000000 04000000>; + }; + + soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */ + linux,phandle = <4000>; + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + compatible = "mpc10x"; + store-gathering = <0>; /* 0 == off, !0 == on */ + reg = <80000000 00100000>; + ranges = <80000000 80000000 70000000 /* pci mem space */ + fc000000 fc000000 00100000 /* EUMB */ + fe000000 fe000000 00c00000 /* pci i/o space */ + fec00000 fec00000 00300000 /* pci cfg regs */ + fef00000 fef00000 00100000>; /* pci iack */ + + i2c@80003000 { + linux,phandle = <4300>; + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <80003000 1000>; + interrupts = <5 2>; + interrupt-parent = <4400>; + }; + + serial@80004500 { + linux,phandle = <4511>; + device_type = "serial"; + compatible = "ns16550"; + reg = <80004500 8>; + clock-frequency = <5d08d88>; + current-speed = <2580>; + interrupts = <9 2>; + interrupt-parent = <4400>; + }; + + serial@80004600 { + linux,phandle = <4512>; + device_type = "serial"; + compatible = "ns16550"; + reg = <80004600 8>; + clock-frequency = <5d08d88>; + current-speed = ; + interrupts = ; + interrupt-parent = <4400>; + }; + + pic@80040000 { + linux,phandle = <4400>; + #interrupt-cells = <2>; + #address-cells = <0>; + device_type = "open-pic"; + compatible = "chrp,open-pic"; + interrupt-controller; + reg = <80040000 40000>; + built-in; + }; + + pci@fec00000 { + linux,phandle = <4500>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "mpc10x-pci"; + reg = ; + ranges = <01000000 0 0 fe000000 0 00c00000 + 02000000 0 80000000 80000000 0 70000000>; + bus-range = <0 ff>; + clock-frequency = <7f28155>; + interrupt-parent = <4400>; + interrupt-map-mask = ; + interrupt-map = < + /* IDSEL 0x11 - IRQ0 ETH */ + 5800 0 0 1 4400 0 1 + 5800 0 0 2 4400 1 1 + 5800 0 0 3 4400 2 1 + 5800 0 0 4 4400 3 1 + /* IDSEL 0x12 - IRQ1 IDE0 */ + 6000 0 0 1 4400 1 1 + 6000 0 0 2 4400 2 1 + 6000 0 0 3 4400 3 1 + 6000 0 0 4 4400 0 1 + /* IDSEL 0x14 - IRQ3 USB2.0 */ + 7000 0 0 1 4400 3 1 + 7000 0 0 2 4400 3 1 + 7000 0 0 3 4400 3 1 + 7000 0 0 4 4400 3 1 + >; + }; + }; +}; diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index 405c1c9..dde66a5 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc5 -# Mon Jan 22 22:17:58 2007 +# Linux kernel version: 2.6.20-rc6 +# Sun Jan 28 23:13:56 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -58,7 +58,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # -CONFIG_LOCALVERSION="-kuroboxHG" +CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y @@ -206,7 +206,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -# CONFIG_SECCOMP is not set +CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y # @@ -312,39 +312,40 @@ CONFIG_NF_CONNTRACK=m # CONFIG_NF_CT_ACCT is not set # CONFIG_NF_CONNTRACK_MARK is not set # CONFIG_NF_CONNTRACK_EVENTS is not set -# CONFIG_NF_CT_PROTO_SCTP is not set -# CONFIG_NF_CONNTRACK_AMANDA is not set +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m -# CONFIG_NF_CONNTRACK_H323 is not set +CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m -# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set -# CONFIG_NF_CONNTRACK_PPTP is not set -# CONFIG_NF_CONNTRACK_SIP is not set +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NETFILTER_XTABLES=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set -CONFIG_NETFILTER_XT_TARGET_MARK=m +# CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set -CONFIG_NETFILTER_XT_TARGET_NFLOG=m +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DSCP is not set -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HELPER is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m +# CONFIG_NETFILTER_XT_MATCH_MARK is not set # CONFIG_NETFILTER_XT_MATCH_POLICY is not set -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set -# CONFIG_NETFILTER_XT_MATCH_STATE is not set +CONFIG_NETFILTER_XT_MATCH_STATE=m # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set # CONFIG_NETFILTER_XT_MATCH_STRING is not set # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set @@ -359,12 +360,12 @@ CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m # CONFIG_IP_NF_MATCH_TOS is not set -# CONFIG_IP_NF_MATCH_RECENT is not set +CONFIG_IP_NF_MATCH_RECENT=m # CONFIG_IP_NF_MATCH_ECN is not set # CONFIG_IP_NF_MATCH_AH is not set # CONFIG_IP_NF_MATCH_TTL is not set -# CONFIG_IP_NF_MATCH_OWNER is not set -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m # CONFIG_IP_NF_TARGET_LOG is not set @@ -374,16 +375,17 @@ CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_SAME is not set # CONFIG_NF_NAT_SNMP_BASIC is not set +CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_FTP=m CONFIG_NF_NAT_IRC=m CONFIG_NF_NAT_TFTP=m -# CONFIG_NF_NAT_AMANDA is not set -# CONFIG_NF_NAT_PPTP is not set -# CONFIG_NF_NAT_H323 is not set -# CONFIG_NF_NAT_SIP is not set +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m @@ -472,6 +474,7 @@ CONFIG_MTD_PARTITIONS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set @@ -518,6 +521,7 @@ CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_START=0xffc00000 CONFIG_MTD_PHYSMAP_LEN=0x400000 CONFIG_MTD_PHYSMAP_BANKWIDTH=1 +# CONFIG_MTD_PHYSMAP_OF is not set # CONFIG_MTD_PLATRAM is not set # @@ -540,6 +544,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # NAND Flash Device Drivers # # CONFIG_MTD_NAND is not set +# CONFIG_MTD_NAND_CAFE is not set # # OneNAND Flash Device Drivers @@ -696,7 +701,7 @@ CONFIG_ATA=y # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set -# CONFIG_PATA_IT821X is not set +CONFIG_PATA_IT821X=y # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set @@ -763,11 +768,33 @@ CONFIG_TUN=m # # PHY device support # +# CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) # -# CONFIG_NET_ETHERNET is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +CONFIG_NET_TULIP=y +# CONFIG_DE2104X is not set +CONFIG_TULIP=y +# CONFIG_TULIP_MWI is not set +CONFIG_TULIP_MMIO=y +# CONFIG_TULIP_NAPI is not set +# CONFIG_DE4X5 is not set +# CONFIG_WINBOND_840 is not set +# CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set # # Ethernet (1000 Mbit) @@ -829,7 +856,8 @@ CONFIG_NET_RADIO=y # CONFIG_USB_ZD1201 is not set # CONFIG_HOSTAP is not set # CONFIG_BCM43XX is not set -# CONFIG_ZD1211RW is not set +CONFIG_ZD1211RW=m +# CONFIG_ZD1211RW_DEBUG is not set CONFIG_NET_WIRELESS=y # @@ -1098,7 +1126,7 @@ CONFIG_DUMMY_CONSOLE=y # # HID Devices # -CONFIG_HID=y +CONFIG_HID=m # # USB support @@ -1115,7 +1143,6 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_MULTITHREAD_PROBE is not set # CONFIG_USB_OTG is not set # @@ -1136,7 +1163,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # USB Device Class drivers # # CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set +CONFIG_USB_PRINTER=m # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1371,7 +1398,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_SECURITY is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set @@ -1461,7 +1492,12 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1495,7 +1531,7 @@ CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set +CONFIG_NLS_CODEPAGE_932=m # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set @@ -1526,12 +1562,14 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set +CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m CONFIG_PLIST=y CONFIG_IOMAP_COPY=y diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c index 61599d9..3f6c411 100644 --- a/arch/powerpc/platforms/embedded6xx/linkstation.c +++ b/arch/powerpc/platforms/embedded6xx/linkstation.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include @@ -91,17 +90,6 @@ static void __init linkstation_setup_arch(void) ARRAY_SIZE(linkstation_physmap_partitions)); #endif -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif - /* Lookup PCI host bridges */ for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); -- cgit v0.10.2 From 99d4f22e91d26e0f8b113bf7fde65a335d36ad6b Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Sat, 10 Feb 2007 08:00:47 -0800 Subject: IB/mthca: Use correct structure size in call to memset() When clearing the ib_ah_attr parameter in to_ib_ah_attr(), use sizeof *ib_ah_attr instead of sizeof *path. Pointed out by Jack Morgenstein . Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c index 5f5214c..224c93d 100644 --- a/drivers/infiniband/hw/mthca/mthca_qp.c +++ b/drivers/infiniband/hw/mthca/mthca_qp.c @@ -399,7 +399,7 @@ static int to_ib_qp_access_flags(int mthca_flags) static void to_ib_ah_attr(struct mthca_dev *dev, struct ib_ah_attr *ib_ah_attr, struct mthca_qp_path *path) { - memset(ib_ah_attr, 0, sizeof *path); + memset(ib_ah_attr, 0, sizeof *ib_ah_attr); ib_ah_attr->port_num = (be32_to_cpu(path->port_pkey) >> 24) & 0x3; if (ib_ah_attr->port_num == 0 || ib_ah_attr->port_num > dev->limits.num_ports) -- cgit v0.10.2 From 9a6b090c0d1cd5c90f21db772dbe2fbcf14366de Mon Sep 17 00:00:00 2001 From: "Ahmed S. Darwish" Date: Tue, 6 Feb 2007 18:07:25 +0200 Subject: IB/core: Use ARRAY_SIZE macro for mandatory_table Use ARRAY_SIZE() macro already defined in kernel.h instead of open coding equivalent code. Signed-off-by: Ahmed S. Darwish Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c index 63d2a39..7fabb42 100644 --- a/drivers/infiniband/core/device.c +++ b/drivers/infiniband/core/device.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #include #include @@ -93,7 +94,7 @@ static int ib_device_check_mandatory(struct ib_device *device) }; int i; - for (i = 0; i < sizeof mandatory_table / sizeof mandatory_table[0]; ++i) { + for (i = 0; i < ARRAY_SIZE(mandatory_table); ++i) { if (!*(void **) ((void *) device + mandatory_table[i].offset)) { printk(KERN_WARNING "Device %s is missing mandatory function %s\n", device->name, mandatory_table[i].name); -- cgit v0.10.2 From 839fcaba355abaffb7b44f0f4504093acb0b11cf Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 5 Feb 2007 22:12:23 +0200 Subject: IPoIB: Connected mode experimental support The following patch adds experimental support for IPoIB connected mode, as defined by the draft from the IETF ipoib working group. The idea is to increase performance by increasing the MTU from the maximum of 2K (theoretically 4K) supported by IPoIB on top of UD. With this code, I'm able to get 800MByte/sec or more with netperf without options on a Mellanox 4x back-to-back DDR system. Some notes on code: 1. SRQ is used for scalability to large cluster sizes 2. Only RC connections are used (UC does not support SRQ now) 3. Retry count is set to 0 since spec draft warns against retries 4. Each connection is used for data transfers in only 1 direction, so each connection is either active(TX) or passive (RX). 2 sides that want to communicate create 2 connections. 5. Each active (TX) connection has a separate CQ for send completions - this keeps the code simple without CQ resize and other tricks 6. To detect stale passive side connections (where the remote side is down), we keep an LRU list of passive connections (updated once per second per connection) and destroy a connection after it has been unused for several seconds. The LRU rule makes it possible to avoid scanning connections that have recently been active. Signed-off-by: Michael S. Tsirkin Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/ulp/ipoib/Kconfig b/drivers/infiniband/ulp/ipoib/Kconfig index c75322d..af78ccc 100644 --- a/drivers/infiniband/ulp/ipoib/Kconfig +++ b/drivers/infiniband/ulp/ipoib/Kconfig @@ -1,6 +1,6 @@ config INFINIBAND_IPOIB tristate "IP-over-InfiniBand" - depends on INFINIBAND && NETDEVICES && INET + depends on INFINIBAND && NETDEVICES && INET && (IPV6 || IPV6=n) ---help--- Support for the IP-over-InfiniBand protocol (IPoIB). This transports IP packets over InfiniBand so you can use your IB @@ -8,6 +8,20 @@ config INFINIBAND_IPOIB See Documentation/infiniband/ipoib.txt for more information +config INFINIBAND_IPOIB_CM + bool "IP-over-InfiniBand Connected Mode support" + depends on INFINIBAND_IPOIB && EXPERIMENTAL + default n + ---help--- + This option enables experimental support for IPoIB connected mode. + After enabling this option, you need to switch to connected mode through + /sys/class/net/ibXXX/mode to actually create connections, and then increase + the interface MTU with e.g. ifconfig ib0 mtu 65520. + + WARNING: Enabling connected mode will trigger some + packet drops for multicast and UD mode traffic from this interface, + unless you limit mtu for these destinations to 2044. + config INFINIBAND_IPOIB_DEBUG bool "IP-over-InfiniBand debugging" if EMBEDDED depends on INFINIBAND_IPOIB diff --git a/drivers/infiniband/ulp/ipoib/Makefile b/drivers/infiniband/ulp/ipoib/Makefile index 8935e74..98ee38e 100644 --- a/drivers/infiniband/ulp/ipoib/Makefile +++ b/drivers/infiniband/ulp/ipoib/Makefile @@ -5,5 +5,6 @@ ib_ipoib-y := ipoib_main.o \ ipoib_multicast.o \ ipoib_verbs.o \ ipoib_vlan.o +ib_ipoib-$(CONFIG_INFINIBAND_IPOIB_CM) += ipoib_cm.o ib_ipoib-$(CONFIG_INFINIBAND_IPOIB_DEBUG) += ipoib_fs.o diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index 07deee8..2594db2 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -62,6 +62,10 @@ enum { IPOIB_ENCAP_LEN = 4, + IPOIB_CM_MTU = 0x10000 - 0x10, /* padding to align header to 16 */ + IPOIB_CM_BUF_SIZE = IPOIB_CM_MTU + IPOIB_ENCAP_LEN, + IPOIB_CM_HEAD_SIZE = IPOIB_CM_BUF_SIZE % PAGE_SIZE, + IPOIB_CM_RX_SG = ALIGN(IPOIB_CM_BUF_SIZE, PAGE_SIZE) / PAGE_SIZE, IPOIB_RX_RING_SIZE = 128, IPOIB_TX_RING_SIZE = 64, IPOIB_MAX_QUEUE_SIZE = 8192, @@ -81,6 +85,8 @@ enum { IPOIB_MCAST_RUN = 6, IPOIB_STOP_REAPER = 7, IPOIB_MCAST_STARTED = 8, + IPOIB_FLAG_NETIF_STOPPED = 9, + IPOIB_FLAG_ADMIN_CM = 10, IPOIB_MAX_BACKOFF_SECONDS = 16, @@ -90,6 +96,13 @@ enum { IPOIB_MCAST_FLAG_ATTACHED = 3, }; +#define IPOIB_OP_RECV (1ul << 31) +#ifdef CONFIG_INFINIBAND_IPOIB_CM +#define IPOIB_CM_OP_SRQ (1ul << 30) +#else +#define IPOIB_CM_OP_SRQ (0) +#endif + /* structs */ struct ipoib_header { @@ -113,6 +126,59 @@ struct ipoib_tx_buf { u64 mapping; }; +struct ib_cm_id; + +struct ipoib_cm_data { + __be32 qpn; /* High byte MUST be ignored on receive */ + __be32 mtu; +}; + +struct ipoib_cm_rx { + struct ib_cm_id *id; + struct ib_qp *qp; + struct list_head list; + struct net_device *dev; + unsigned long jiffies; +}; + +struct ipoib_cm_tx { + struct ib_cm_id *id; + struct ib_cq *cq; + struct ib_qp *qp; + struct list_head list; + struct net_device *dev; + struct ipoib_neigh *neigh; + struct ipoib_path *path; + struct ipoib_tx_buf *tx_ring; + unsigned tx_head; + unsigned tx_tail; + unsigned long flags; + u32 mtu; + struct ib_wc ibwc[IPOIB_NUM_WC]; +}; + +struct ipoib_cm_rx_buf { + struct sk_buff *skb; + u64 mapping[IPOIB_CM_RX_SG]; +}; + +struct ipoib_cm_dev_priv { + struct ib_srq *srq; + struct ipoib_cm_rx_buf *srq_ring; + struct ib_cm_id *id; + struct list_head passive_ids; + struct work_struct start_task; + struct work_struct reap_task; + struct work_struct skb_task; + struct delayed_work stale_task; + struct sk_buff_head skb_queue; + struct list_head start_list; + struct list_head reap_list; + struct ib_wc ibwc[IPOIB_NUM_WC]; + struct ib_sge rx_sge[IPOIB_CM_RX_SG]; + struct ib_recv_wr rx_wr; +}; + /* * Device private locking: tx_lock protects members used in TX fast * path (and we use LLTX so upper layers don't do extra locking). @@ -179,6 +245,10 @@ struct ipoib_dev_priv { struct list_head child_intfs; struct list_head list; +#ifdef CONFIG_INFINIBAND_IPOIB_CM + struct ipoib_cm_dev_priv cm; +#endif + #ifdef CONFIG_INFINIBAND_IPOIB_DEBUG struct list_head fs_list; struct dentry *mcg_dentry; @@ -212,6 +282,9 @@ struct ipoib_path { struct ipoib_neigh { struct ipoib_ah *ah; +#ifdef CONFIG_INFINIBAND_IPOIB_CM + struct ipoib_cm_tx *cm; +#endif union ib_gid dgid; struct sk_buff_head queue; @@ -315,6 +388,146 @@ int ipoib_vlan_delete(struct net_device *pdev, unsigned short pkey); void ipoib_pkey_poll(struct work_struct *work); int ipoib_pkey_dev_delay_open(struct net_device *dev); +#ifdef CONFIG_INFINIBAND_IPOIB_CM + +#define IPOIB_FLAGS_RC 0x80 +#define IPOIB_FLAGS_UC 0x40 + +/* We don't support UC connections at the moment */ +#define IPOIB_CM_SUPPORTED(ha) (ha[0] & (IPOIB_FLAGS_RC)) + +static inline int ipoib_cm_admin_enabled(struct net_device *dev) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + return IPOIB_CM_SUPPORTED(dev->dev_addr) && + test_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags); +} + +static inline int ipoib_cm_enabled(struct net_device *dev, struct neighbour *n) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + return IPOIB_CM_SUPPORTED(n->ha) && + test_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags); +} + +static inline int ipoib_cm_up(struct ipoib_neigh *neigh) + +{ + return test_bit(IPOIB_FLAG_OPER_UP, &neigh->cm->flags); +} + +static inline struct ipoib_cm_tx *ipoib_cm_get(struct ipoib_neigh *neigh) +{ + return neigh->cm; +} + +static inline void ipoib_cm_set(struct ipoib_neigh *neigh, struct ipoib_cm_tx *tx) +{ + neigh->cm = tx; +} + +void ipoib_cm_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_cm_tx *tx); +int ipoib_cm_dev_open(struct net_device *dev); +void ipoib_cm_dev_stop(struct net_device *dev); +int ipoib_cm_dev_init(struct net_device *dev); +int ipoib_cm_add_mode_attr(struct net_device *dev); +void ipoib_cm_dev_cleanup(struct net_device *dev); +struct ipoib_cm_tx *ipoib_cm_create_tx(struct net_device *dev, struct ipoib_path *path, + struct ipoib_neigh *neigh); +void ipoib_cm_destroy_tx(struct ipoib_cm_tx *tx); +void ipoib_cm_skb_too_long(struct net_device* dev, struct sk_buff *skb, + unsigned int mtu); +void ipoib_cm_handle_rx_wc(struct net_device *dev, struct ib_wc *wc); +#else + +struct ipoib_cm_tx; + +static inline int ipoib_cm_admin_enabled(struct net_device *dev) +{ + return 0; +} +static inline int ipoib_cm_enabled(struct net_device *dev, struct neighbour *n) + +{ + return 0; +} + +static inline int ipoib_cm_up(struct ipoib_neigh *neigh) + +{ + return 0; +} + +static inline struct ipoib_cm_tx *ipoib_cm_get(struct ipoib_neigh *neigh) +{ + return NULL; +} + +static inline void ipoib_cm_set(struct ipoib_neigh *neigh, struct ipoib_cm_tx *tx) +{ +} + +static inline +void ipoib_cm_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_cm_tx *tx) +{ + return; +} + +static inline +int ipoib_cm_dev_open(struct net_device *dev) +{ + return 0; +} + +static inline +void ipoib_cm_dev_stop(struct net_device *dev) +{ + return; +} + +static inline +int ipoib_cm_dev_init(struct net_device *dev) +{ + return -ENOSYS; +} + +static inline +void ipoib_cm_dev_cleanup(struct net_device *dev) +{ + return; +} + +static inline +struct ipoib_cm_tx *ipoib_cm_create_tx(struct net_device *dev, struct ipoib_path *path, + struct ipoib_neigh *neigh) +{ + return NULL; +} + +static inline +void ipoib_cm_destroy_tx(struct ipoib_cm_tx *tx) +{ + return; +} + +static inline +int ipoib_cm_add_mode_attr(struct net_device *dev) +{ + return 0; +} + +static inline void ipoib_cm_skb_too_long(struct net_device* dev, struct sk_buff *skb, + unsigned int mtu) +{ + dev_kfree_skb_any(skb); +} + +static inline void ipoib_cm_handle_rx_wc(struct net_device *dev, struct ib_wc *wc) +{ +} + +#endif + #ifdef CONFIG_INFINIBAND_IPOIB_DEBUG void ipoib_create_debug_files(struct net_device *dev); void ipoib_delete_debug_files(struct net_device *dev); @@ -392,4 +605,6 @@ extern int ipoib_debug_level; #define IPOIB_GID_ARG(gid) IPOIB_GID_RAW_ARG((gid).raw) +#define IPOIB_QPN(ha) (be32_to_cpup((__be32 *) ha) & 0xffffff) + #endif /* _IPOIB_H */ diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c new file mode 100644 index 0000000..2d48387 --- /dev/null +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -0,0 +1,1237 @@ +/* + * Copyright (c) 2006 Mellanox Technologies. All rights reserved + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + * $Id$ + */ + +#include +#include +#include +#include +#include + +#ifdef CONFIG_INFINIBAND_IPOIB_DEBUG_DATA +static int data_debug_level; + +module_param_named(cm_data_debug_level, data_debug_level, int, 0644); +MODULE_PARM_DESC(cm_data_debug_level, + "Enable data path debug tracing for connected mode if > 0"); +#endif + +#include "ipoib.h" + +#define IPOIB_CM_IETF_ID 0x1000000000000000ULL + +#define IPOIB_CM_RX_UPDATE_TIME (256 * HZ) +#define IPOIB_CM_RX_TIMEOUT (2 * 256 * HZ) +#define IPOIB_CM_RX_DELAY (3 * 256 * HZ) +#define IPOIB_CM_RX_UPDATE_MASK (0x3) + +struct ipoib_cm_id { + struct ib_cm_id *id; + int flags; + u32 remote_qpn; + u32 remote_mtu; +}; + +static int ipoib_cm_tx_handler(struct ib_cm_id *cm_id, + struct ib_cm_event *event); + +static void ipoib_cm_dma_unmap_rx(struct ipoib_dev_priv *priv, + u64 mapping[IPOIB_CM_RX_SG]) +{ + int i; + + ib_dma_unmap_single(priv->ca, mapping[0], IPOIB_CM_HEAD_SIZE, DMA_FROM_DEVICE); + + for (i = 0; i < IPOIB_CM_RX_SG - 1; ++i) + ib_dma_unmap_single(priv->ca, mapping[i + 1], PAGE_SIZE, DMA_FROM_DEVICE); +} + +static int ipoib_cm_post_receive(struct net_device *dev, int id) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ib_recv_wr *bad_wr; + int i, ret; + + priv->cm.rx_wr.wr_id = id | IPOIB_CM_OP_SRQ; + + for (i = 0; i < IPOIB_CM_RX_SG; ++i) + priv->cm.rx_sge[i].addr = priv->cm.srq_ring[id].mapping[i]; + + ret = ib_post_srq_recv(priv->cm.srq, &priv->cm.rx_wr, &bad_wr); + if (unlikely(ret)) { + ipoib_warn(priv, "post srq failed for buf %d (%d)\n", id, ret); + ipoib_cm_dma_unmap_rx(priv, priv->cm.srq_ring[id].mapping); + dev_kfree_skb_any(priv->cm.srq_ring[id].skb); + priv->cm.srq_ring[id].skb = NULL; + } + + return ret; +} + +static int ipoib_cm_alloc_rx_skb(struct net_device *dev, int id, + u64 mapping[IPOIB_CM_RX_SG]) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct sk_buff *skb; + int i; + + skb = dev_alloc_skb(IPOIB_CM_HEAD_SIZE + 12); + if (unlikely(!skb)) + return -ENOMEM; + + /* + * IPoIB adds a 4 byte header. So we need 12 more bytes to align the + * IP header to a multiple of 16. + */ + skb_reserve(skb, 12); + + mapping[0] = ib_dma_map_single(priv->ca, skb->data, IPOIB_CM_HEAD_SIZE, + DMA_FROM_DEVICE); + if (unlikely(ib_dma_mapping_error(priv->ca, mapping[0]))) { + dev_kfree_skb_any(skb); + return -EIO; + } + + for (i = 0; i < IPOIB_CM_RX_SG - 1; i++) { + struct page *page = alloc_page(GFP_ATOMIC); + + if (!page) + goto partial_error; + skb_fill_page_desc(skb, i, page, 0, PAGE_SIZE); + + mapping[i + 1] = ib_dma_map_page(priv->ca, skb_shinfo(skb)->frags[i].page, + 0, PAGE_SIZE, DMA_TO_DEVICE); + if (unlikely(ib_dma_mapping_error(priv->ca, mapping[i + 1]))) + goto partial_error; + } + + priv->cm.srq_ring[id].skb = skb; + return 0; + +partial_error: + + ib_dma_unmap_single(priv->ca, mapping[0], IPOIB_CM_HEAD_SIZE, DMA_FROM_DEVICE); + + for (; i >= 0; --i) + ib_dma_unmap_single(priv->ca, mapping[i + 1], PAGE_SIZE, DMA_FROM_DEVICE); + + kfree_skb(skb); + return -ENOMEM; +} + +static struct ib_qp *ipoib_cm_create_rx_qp(struct net_device *dev, + struct ipoib_cm_rx *p) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ib_qp_init_attr attr = { + .send_cq = priv->cq, /* does not matter, we never send anything */ + .recv_cq = priv->cq, + .srq = priv->cm.srq, + .cap.max_send_wr = 1, /* FIXME: 0 Seems not to work */ + .cap.max_send_sge = 1, /* FIXME: 0 Seems not to work */ + .sq_sig_type = IB_SIGNAL_ALL_WR, + .qp_type = IB_QPT_RC, + .qp_context = p, + }; + return ib_create_qp(priv->pd, &attr); +} + +static int ipoib_cm_modify_rx_qp(struct net_device *dev, + struct ib_cm_id *cm_id, struct ib_qp *qp, + unsigned psn) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ib_qp_attr qp_attr; + int qp_attr_mask, ret; + + qp_attr.qp_state = IB_QPS_INIT; + ret = ib_cm_init_qp_attr(cm_id, &qp_attr, &qp_attr_mask); + if (ret) { + ipoib_warn(priv, "failed to init QP attr for INIT: %d\n", ret); + return ret; + } + ret = ib_modify_qp(qp, &qp_attr, qp_attr_mask); + if (ret) { + ipoib_warn(priv, "failed to modify QP to INIT: %d\n", ret); + return ret; + } + qp_attr.qp_state = IB_QPS_RTR; + ret = ib_cm_init_qp_attr(cm_id, &qp_attr, &qp_attr_mask); + if (ret) { + ipoib_warn(priv, "failed to init QP attr for RTR: %d\n", ret); + return ret; + } + qp_attr.rq_psn = psn; + ret = ib_modify_qp(qp, &qp_attr, qp_attr_mask); + if (ret) { + ipoib_warn(priv, "failed to modify QP to RTR: %d\n", ret); + return ret; + } + return 0; +} + +static int ipoib_cm_send_rep(struct net_device *dev, struct ib_cm_id *cm_id, + struct ib_qp *qp, struct ib_cm_req_event_param *req, + unsigned psn) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ipoib_cm_data data = {}; + struct ib_cm_rep_param rep = {}; + + data.qpn = cpu_to_be32(priv->qp->qp_num); + data.mtu = cpu_to_be32(IPOIB_CM_BUF_SIZE); + + rep.private_data = &data; + rep.private_data_len = sizeof data; + rep.flow_control = 0; + rep.rnr_retry_count = req->rnr_retry_count; + rep.target_ack_delay = 20; /* FIXME */ + rep.srq = 1; + rep.qp_num = qp->qp_num; + rep.starting_psn = psn; + return ib_send_cm_rep(cm_id, &rep); +} + +static int ipoib_cm_req_handler(struct ib_cm_id *cm_id, struct ib_cm_event *event) +{ + struct net_device *dev = cm_id->context; + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ipoib_cm_rx *p; + unsigned long flags; + unsigned psn; + int ret; + + ipoib_dbg(priv, "REQ arrived\n"); + p = kzalloc(sizeof *p, GFP_KERNEL); + if (!p) + return -ENOMEM; + p->dev = dev; + p->id = cm_id; + p->qp = ipoib_cm_create_rx_qp(dev, p); + if (IS_ERR(p->qp)) { + ret = PTR_ERR(p->qp); + goto err_qp; + } + + psn = random32() & 0xffffff; + ret = ipoib_cm_modify_rx_qp(dev, cm_id, p->qp, psn); + if (ret) + goto err_modify; + + ret = ipoib_cm_send_rep(dev, cm_id, p->qp, &event->param.req_rcvd, psn); + if (ret) { + ipoib_warn(priv, "failed to send REP: %d\n", ret); + goto err_rep; + } + + cm_id->context = p; + p->jiffies = jiffies; + spin_lock_irqsave(&priv->lock, flags); + list_add(&p->list, &priv->cm.passive_ids); + spin_unlock_irqrestore(&priv->lock, flags); + queue_delayed_work(ipoib_workqueue, + &priv->cm.stale_task, IPOIB_CM_RX_DELAY); + return 0; + +err_rep: +err_modify: + ib_destroy_qp(p->qp); +err_qp: + kfree(p); + return ret; +} + +static int ipoib_cm_rx_handler(struct ib_cm_id *cm_id, + struct ib_cm_event *event) +{ + struct ipoib_cm_rx *p; + struct ipoib_dev_priv *priv; + unsigned long flags; + int ret; + + switch (event->event) { + case IB_CM_REQ_RECEIVED: + return ipoib_cm_req_handler(cm_id, event); + case IB_CM_DREQ_RECEIVED: + p = cm_id->context; + ib_send_cm_drep(cm_id, NULL, 0); + /* Fall through */ + case IB_CM_REJ_RECEIVED: + p = cm_id->context; + priv = netdev_priv(p->dev); + spin_lock_irqsave(&priv->lock, flags); + if (list_empty(&p->list)) + ret = 0; /* Connection is going away already. */ + else { + list_del_init(&p->list); + ret = -ECONNRESET; + } + spin_unlock_irqrestore(&priv->lock, flags); + if (ret) { + ib_destroy_qp(p->qp); + kfree(p); + return ret; + } + return 0; + default: + return 0; + } +} +/* Adjust length of skb with fragments to match received data */ +static void skb_put_frags(struct sk_buff *skb, unsigned int hdr_space, + unsigned int length) +{ + int i, num_frags; + unsigned int size; + + /* put header into skb */ + size = min(length, hdr_space); + skb->tail += size; + skb->len += size; + length -= size; + + num_frags = skb_shinfo(skb)->nr_frags; + for (i = 0; i < num_frags; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + + if (length == 0) { + /* don't need this page */ + __free_page(frag->page); + --skb_shinfo(skb)->nr_frags; + } else { + size = min(length, (unsigned) PAGE_SIZE); + + frag->size = size; + skb->data_len += size; + skb->truesize += size; + skb->len += size; + length -= size; + } + } +} + +void ipoib_cm_handle_rx_wc(struct net_device *dev, struct ib_wc *wc) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + unsigned int wr_id = wc->wr_id & ~IPOIB_CM_OP_SRQ; + struct sk_buff *skb; + struct ipoib_cm_rx *p; + unsigned long flags; + u64 mapping[IPOIB_CM_RX_SG]; + + ipoib_dbg_data(priv, "cm recv completion: id %d, op %d, status: %d\n", + wr_id, wc->opcode, wc->status); + + if (unlikely(wr_id >= ipoib_recvq_size)) { + ipoib_warn(priv, "cm recv completion event with wrid %d (> %d)\n", + wr_id, ipoib_recvq_size); + return; + } + + skb = priv->cm.srq_ring[wr_id].skb; + + if (unlikely(wc->status != IB_WC_SUCCESS)) { + ipoib_dbg(priv, "cm recv error " + "(status=%d, wrid=%d vend_err %x)\n", + wc->status, wr_id, wc->vendor_err); + ++priv->stats.rx_dropped; + goto repost; + } + + if (!likely(wr_id & IPOIB_CM_RX_UPDATE_MASK)) { + p = wc->qp->qp_context; + if (time_after_eq(jiffies, p->jiffies + IPOIB_CM_RX_UPDATE_TIME)) { + spin_lock_irqsave(&priv->lock, flags); + p->jiffies = jiffies; + /* Move this entry to list head, but do + * not re-add it if it has been removed. */ + if (!list_empty(&p->list)) + list_move(&p->list, &priv->cm.passive_ids); + spin_unlock_irqrestore(&priv->lock, flags); + queue_delayed_work(ipoib_workqueue, + &priv->cm.stale_task, IPOIB_CM_RX_DELAY); + } + } + + if (unlikely(ipoib_cm_alloc_rx_skb(dev, wr_id, mapping))) { + /* + * If we can't allocate a new RX buffer, dump + * this packet and reuse the old buffer. + */ + ipoib_dbg(priv, "failed to allocate receive buffer %d\n", wr_id); + ++priv->stats.rx_dropped; + goto repost; + } + + ipoib_cm_dma_unmap_rx(priv, priv->cm.srq_ring[wr_id].mapping); + memcpy(priv->cm.srq_ring[wr_id].mapping, mapping, sizeof mapping); + + ipoib_dbg_data(priv, "received %d bytes, SLID 0x%04x\n", + wc->byte_len, wc->slid); + + skb_put_frags(skb, IPOIB_CM_HEAD_SIZE, wc->byte_len); + + skb->protocol = ((struct ipoib_header *) skb->data)->proto; + skb->mac.raw = skb->data; + skb_pull(skb, IPOIB_ENCAP_LEN); + + dev->last_rx = jiffies; + ++priv->stats.rx_packets; + priv->stats.rx_bytes += skb->len; + + skb->dev = dev; + /* XXX get correct PACKET_ type here */ + skb->pkt_type = PACKET_HOST; + netif_rx_ni(skb); + +repost: + if (unlikely(ipoib_cm_post_receive(dev, wr_id))) + ipoib_warn(priv, "ipoib_cm_post_receive failed " + "for buf %d\n", wr_id); +} + +static inline int post_send(struct ipoib_dev_priv *priv, + struct ipoib_cm_tx *tx, + unsigned int wr_id, + u64 addr, int len) +{ + struct ib_send_wr *bad_wr; + + priv->tx_sge.addr = addr; + priv->tx_sge.length = len; + + priv->tx_wr.wr_id = wr_id; + + return ib_post_send(tx->qp, &priv->tx_wr, &bad_wr); +} + +void ipoib_cm_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_cm_tx *tx) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ipoib_tx_buf *tx_req; + u64 addr; + + if (unlikely(skb->len > tx->mtu)) { + ipoib_warn(priv, "packet len %d (> %d) too long to send, dropping\n", + skb->len, tx->mtu); + ++priv->stats.tx_dropped; + ++priv->stats.tx_errors; + ipoib_cm_skb_too_long(dev, skb, tx->mtu - INFINIBAND_ALEN); + return; + } + + ipoib_dbg_data(priv, "sending packet: head 0x%x length %d connection 0x%x\n", + tx->tx_head, skb->len, tx->qp->qp_num); + + /* + * We put the skb into the tx_ring _before_ we call post_send() + * because it's entirely possible that the completion handler will + * run before we execute anything after the post_send(). That + * means we have to make sure everything is properly recorded and + * our state is consistent before we call post_send(). + */ + tx_req = &tx->tx_ring[tx->tx_head & (ipoib_sendq_size - 1)]; + tx_req->skb = skb; + addr = ib_dma_map_single(priv->ca, skb->data, skb->len, DMA_TO_DEVICE); + if (unlikely(ib_dma_mapping_error(priv->ca, addr))) { + ++priv->stats.tx_errors; + dev_kfree_skb_any(skb); + return; + } + + tx_req->mapping = addr; + + if (unlikely(post_send(priv, tx, tx->tx_head & (ipoib_sendq_size - 1), + addr, skb->len))) { + ipoib_warn(priv, "post_send failed\n"); + ++priv->stats.tx_errors; + ib_dma_unmap_single(priv->ca, addr, skb->len, DMA_TO_DEVICE); + dev_kfree_skb_any(skb); + } else { + dev->trans_start = jiffies; + ++tx->tx_head; + + if (tx->tx_head - tx->tx_tail == ipoib_sendq_size) { + ipoib_dbg(priv, "TX ring 0x%x full, stopping kernel net queue\n", + tx->qp->qp_num); + netif_stop_queue(dev); + set_bit(IPOIB_FLAG_NETIF_STOPPED, &tx->flags); + } + } +} + +static void ipoib_cm_handle_tx_wc(struct net_device *dev, struct ipoib_cm_tx *tx, + struct ib_wc *wc) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + unsigned int wr_id = wc->wr_id; + struct ipoib_tx_buf *tx_req; + unsigned long flags; + + ipoib_dbg_data(priv, "cm send completion: id %d, op %d, status: %d\n", + wr_id, wc->opcode, wc->status); + + if (unlikely(wr_id >= ipoib_sendq_size)) { + ipoib_warn(priv, "cm send completion event with wrid %d (> %d)\n", + wr_id, ipoib_sendq_size); + return; + } + + tx_req = &tx->tx_ring[wr_id]; + + ib_dma_unmap_single(priv->ca, tx_req->mapping, tx_req->skb->len, DMA_TO_DEVICE); + + /* FIXME: is this right? Shouldn't we only increment on success? */ + ++priv->stats.tx_packets; + priv->stats.tx_bytes += tx_req->skb->len; + + dev_kfree_skb_any(tx_req->skb); + + spin_lock_irqsave(&priv->tx_lock, flags); + ++tx->tx_tail; + if (unlikely(test_bit(IPOIB_FLAG_NETIF_STOPPED, &tx->flags)) && + tx->tx_head - tx->tx_tail <= ipoib_sendq_size >> 1) { + clear_bit(IPOIB_FLAG_NETIF_STOPPED, &tx->flags); + netif_wake_queue(dev); + } + + if (wc->status != IB_WC_SUCCESS && + wc->status != IB_WC_WR_FLUSH_ERR) { + struct ipoib_neigh *neigh; + + ipoib_dbg(priv, "failed cm send event " + "(status=%d, wrid=%d vend_err %x)\n", + wc->status, wr_id, wc->vendor_err); + + spin_lock(&priv->lock); + neigh = tx->neigh; + + if (neigh) { + neigh->cm = NULL; + list_del(&neigh->list); + if (neigh->ah) + ipoib_put_ah(neigh->ah); + ipoib_neigh_free(dev, neigh); + + tx->neigh = NULL; + } + + /* queue would be re-started anyway when TX is destroyed, + * but it makes sense to do it ASAP here. */ + if (test_and_clear_bit(IPOIB_FLAG_NETIF_STOPPED, &tx->flags)) + netif_wake_queue(dev); + + if (test_and_clear_bit(IPOIB_FLAG_INITIALIZED, &tx->flags)) { + list_move(&tx->list, &priv->cm.reap_list); + queue_work(ipoib_workqueue, &priv->cm.reap_task); + } + + clear_bit(IPOIB_FLAG_OPER_UP, &tx->flags); + + spin_unlock(&priv->lock); + } + + spin_unlock_irqrestore(&priv->tx_lock, flags); +} + +static void ipoib_cm_tx_completion(struct ib_cq *cq, void *tx_ptr) +{ + struct ipoib_cm_tx *tx = tx_ptr; + int n, i; + + ib_req_notify_cq(cq, IB_CQ_NEXT_COMP); + do { + n = ib_poll_cq(cq, IPOIB_NUM_WC, tx->ibwc); + for (i = 0; i < n; ++i) + ipoib_cm_handle_tx_wc(tx->dev, tx, tx->ibwc + i); + } while (n == IPOIB_NUM_WC); +} + +int ipoib_cm_dev_open(struct net_device *dev) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + int ret; + + if (!IPOIB_CM_SUPPORTED(dev->dev_addr)) + return 0; + + priv->cm.id = ib_create_cm_id(priv->ca, ipoib_cm_rx_handler, dev); + if (IS_ERR(priv->cm.id)) { + printk(KERN_WARNING "%s: failed to create CM ID\n", priv->ca->name); + return IS_ERR(priv->cm.id); + } + + ret = ib_cm_listen(priv->cm.id, cpu_to_be64(IPOIB_CM_IETF_ID | priv->qp->qp_num), + 0, NULL); + if (ret) { + printk(KERN_WARNING "%s: failed to listen on ID 0x%llx\n", priv->ca->name, + IPOIB_CM_IETF_ID | priv->qp->qp_num); + ib_destroy_cm_id(priv->cm.id); + return ret; + } + return 0; +} + +void ipoib_cm_dev_stop(struct net_device *dev) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ipoib_cm_rx *p; + unsigned long flags; + + if (!IPOIB_CM_SUPPORTED(dev->dev_addr)) + return; + + ib_destroy_cm_id(priv->cm.id); + spin_lock_irqsave(&priv->lock, flags); + while (!list_empty(&priv->cm.passive_ids)) { + p = list_entry(priv->cm.passive_ids.next, typeof(*p), list); + list_del_init(&p->list); + spin_unlock_irqrestore(&priv->lock, flags); + ib_destroy_cm_id(p->id); + ib_destroy_qp(p->qp); + kfree(p); + spin_lock_irqsave(&priv->lock, flags); + } + spin_unlock_irqrestore(&priv->lock, flags); + + cancel_delayed_work(&priv->cm.stale_task); +} + +static int ipoib_cm_rep_handler(struct ib_cm_id *cm_id, struct ib_cm_event *event) +{ + struct ipoib_cm_tx *p = cm_id->context; + struct ipoib_dev_priv *priv = netdev_priv(p->dev); + struct ipoib_cm_data *data = event->private_data; + struct sk_buff_head skqueue; + struct ib_qp_attr qp_attr; + int qp_attr_mask, ret; + struct sk_buff *skb; + unsigned long flags; + + p->mtu = be32_to_cpu(data->mtu); + + if (p->mtu < priv->dev->mtu + IPOIB_ENCAP_LEN) { + ipoib_warn(priv, "Rejecting connection: mtu %d < device mtu %d + 4\n", + p->mtu, priv->dev->mtu); + return -EINVAL; + } + + qp_attr.qp_state = IB_QPS_RTR; + ret = ib_cm_init_qp_attr(cm_id, &qp_attr, &qp_attr_mask); + if (ret) { + ipoib_warn(priv, "failed to init QP attr for RTR: %d\n", ret); + return ret; + } + + qp_attr.rq_psn = 0 /* FIXME */; + ret = ib_modify_qp(p->qp, &qp_attr, qp_attr_mask); + if (ret) { + ipoib_warn(priv, "failed to modify QP to RTR: %d\n", ret); + return ret; + } + + qp_attr.qp_state = IB_QPS_RTS; + ret = ib_cm_init_qp_attr(cm_id, &qp_attr, &qp_attr_mask); + if (ret) { + ipoib_warn(priv, "failed to init QP attr for RTS: %d\n", ret); + return ret; + } + ret = ib_modify_qp(p->qp, &qp_attr, qp_attr_mask); + if (ret) { + ipoib_warn(priv, "failed to modify QP to RTS: %d\n", ret); + return ret; + } + + skb_queue_head_init(&skqueue); + + spin_lock_irqsave(&priv->lock, flags); + set_bit(IPOIB_FLAG_OPER_UP, &p->flags); + if (p->neigh) + while ((skb = __skb_dequeue(&p->neigh->queue))) + __skb_queue_tail(&skqueue, skb); + spin_unlock_irqrestore(&priv->lock, flags); + + while ((skb = __skb_dequeue(&skqueue))) { + skb->dev = p->dev; + if (dev_queue_xmit(skb)) + ipoib_warn(priv, "dev_queue_xmit failed " + "to requeue packet\n"); + } + + ret = ib_send_cm_rtu(cm_id, NULL, 0); + if (ret) { + ipoib_warn(priv, "failed to send RTU: %d\n", ret); + return ret; + } + return 0; +} + +static struct ib_qp *ipoib_cm_create_tx_qp(struct net_device *dev, struct ib_cq *cq) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ib_qp_init_attr attr = {}; + attr.recv_cq = priv->cq; + attr.srq = priv->cm.srq; + attr.cap.max_send_wr = ipoib_sendq_size; + attr.cap.max_send_sge = 1; + attr.sq_sig_type = IB_SIGNAL_ALL_WR; + attr.qp_type = IB_QPT_RC; + attr.send_cq = cq; + return ib_create_qp(priv->pd, &attr); +} + +static int ipoib_cm_send_req(struct net_device *dev, + struct ib_cm_id *id, struct ib_qp *qp, + u32 qpn, + struct ib_sa_path_rec *pathrec) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ipoib_cm_data data = {}; + struct ib_cm_req_param req = {}; + + data.qpn = cpu_to_be32(priv->qp->qp_num); + data.mtu = cpu_to_be32(IPOIB_CM_BUF_SIZE); + + req.primary_path = pathrec; + req.alternate_path = NULL; + req.service_id = cpu_to_be64(IPOIB_CM_IETF_ID | qpn); + req.qp_num = qp->qp_num; + req.qp_type = qp->qp_type; + req.private_data = &data; + req.private_data_len = sizeof data; + req.flow_control = 0; + + req.starting_psn = 0; /* FIXME */ + + /* + * Pick some arbitrary defaults here; we could make these + * module parameters if anyone cared about setting them. + */ + req.responder_resources = 4; + req.remote_cm_response_timeout = 20; + req.local_cm_response_timeout = 20; + req.retry_count = 0; /* RFC draft warns against retries */ + req.rnr_retry_count = 0; /* RFC draft warns against retries */ + req.max_cm_retries = 15; + req.srq = 1; + return ib_send_cm_req(id, &req); +} + +static int ipoib_cm_modify_tx_init(struct net_device *dev, + struct ib_cm_id *cm_id, struct ib_qp *qp) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ib_qp_attr qp_attr; + int qp_attr_mask, ret; + ret = ib_find_cached_pkey(priv->ca, priv->port, priv->pkey, &qp_attr.pkey_index); + if (ret) { + ipoib_warn(priv, "pkey 0x%x not in cache: %d\n", priv->pkey, ret); + return ret; + } + + qp_attr.qp_state = IB_QPS_INIT; + qp_attr.qp_access_flags = IB_ACCESS_LOCAL_WRITE; + qp_attr.port_num = priv->port; + qp_attr_mask = IB_QP_STATE | IB_QP_ACCESS_FLAGS | IB_QP_PKEY_INDEX | IB_QP_PORT; + + ret = ib_modify_qp(qp, &qp_attr, qp_attr_mask); + if (ret) { + ipoib_warn(priv, "failed to modify tx QP to INIT: %d\n", ret); + return ret; + } + return 0; +} + +static int ipoib_cm_tx_init(struct ipoib_cm_tx *p, u32 qpn, + struct ib_sa_path_rec *pathrec) +{ + struct ipoib_dev_priv *priv = netdev_priv(p->dev); + int ret; + + p->tx_ring = kzalloc(ipoib_sendq_size * sizeof *p->tx_ring, + GFP_KERNEL); + if (!p->tx_ring) { + ipoib_warn(priv, "failed to allocate tx ring\n"); + ret = -ENOMEM; + goto err_tx; + } + + p->cq = ib_create_cq(priv->ca, ipoib_cm_tx_completion, NULL, p, + ipoib_sendq_size + 1); + if (IS_ERR(p->cq)) { + ret = PTR_ERR(p->cq); + ipoib_warn(priv, "failed to allocate tx cq: %d\n", ret); + goto err_cq; + } + + ret = ib_req_notify_cq(p->cq, IB_CQ_NEXT_COMP); + if (ret) { + ipoib_warn(priv, "failed to request completion notification: %d\n", ret); + goto err_req_notify; + } + + p->qp = ipoib_cm_create_tx_qp(p->dev, p->cq); + if (IS_ERR(p->qp)) { + ret = PTR_ERR(p->qp); + ipoib_warn(priv, "failed to allocate tx qp: %d\n", ret); + goto err_qp; + } + + p->id = ib_create_cm_id(priv->ca, ipoib_cm_tx_handler, p); + if (IS_ERR(p->id)) { + ret = PTR_ERR(p->id); + ipoib_warn(priv, "failed to create tx cm id: %d\n", ret); + goto err_id; + } + + ret = ipoib_cm_modify_tx_init(p->dev, p->id, p->qp); + if (ret) { + ipoib_warn(priv, "failed to modify tx qp to rtr: %d\n", ret); + goto err_modify; + } + + ret = ipoib_cm_send_req(p->dev, p->id, p->qp, qpn, pathrec); + if (ret) { + ipoib_warn(priv, "failed to send cm req: %d\n", ret); + goto err_send_cm; + } + + ipoib_dbg(priv, "Request connection 0x%x for gid " IPOIB_GID_FMT " qpn 0x%x\n", + p->qp->qp_num, IPOIB_GID_ARG(pathrec->dgid), qpn); + + return 0; + +err_send_cm: +err_modify: + ib_destroy_cm_id(p->id); +err_id: + p->id = NULL; + ib_destroy_qp(p->qp); +err_req_notify: +err_qp: + p->qp = NULL; + ib_destroy_cq(p->cq); +err_cq: + p->cq = NULL; +err_tx: + return ret; +} + +static void ipoib_cm_tx_destroy(struct ipoib_cm_tx *p) +{ + struct ipoib_dev_priv *priv = netdev_priv(p->dev); + struct ipoib_tx_buf *tx_req; + + ipoib_dbg(priv, "Destroy active connection 0x%x head 0x%x tail 0x%x\n", + p->qp ? p->qp->qp_num : 0, p->tx_head, p->tx_tail); + + if (p->id) + ib_destroy_cm_id(p->id); + + if (p->qp) + ib_destroy_qp(p->qp); + + if (p->cq) + ib_destroy_cq(p->cq); + + if (test_bit(IPOIB_FLAG_NETIF_STOPPED, &p->flags)) + netif_wake_queue(p->dev); + + if (p->tx_ring) { + while ((int) p->tx_tail - (int) p->tx_head < 0) { + tx_req = &p->tx_ring[p->tx_tail & (ipoib_sendq_size - 1)]; + ib_dma_unmap_single(priv->ca, tx_req->mapping, tx_req->skb->len, + DMA_TO_DEVICE); + dev_kfree_skb_any(tx_req->skb); + ++p->tx_tail; + } + + kfree(p->tx_ring); + } + + kfree(p); +} + +static int ipoib_cm_tx_handler(struct ib_cm_id *cm_id, + struct ib_cm_event *event) +{ + struct ipoib_cm_tx *tx = cm_id->context; + struct ipoib_dev_priv *priv = netdev_priv(tx->dev); + struct net_device *dev = priv->dev; + struct ipoib_neigh *neigh; + unsigned long flags; + int ret; + + switch (event->event) { + case IB_CM_DREQ_RECEIVED: + ipoib_dbg(priv, "DREQ received.\n"); + ib_send_cm_drep(cm_id, NULL, 0); + break; + case IB_CM_REP_RECEIVED: + ipoib_dbg(priv, "REP received.\n"); + ret = ipoib_cm_rep_handler(cm_id, event); + if (ret) + ib_send_cm_rej(cm_id, IB_CM_REJ_CONSUMER_DEFINED, + NULL, 0, NULL, 0); + break; + case IB_CM_REQ_ERROR: + case IB_CM_REJ_RECEIVED: + case IB_CM_TIMEWAIT_EXIT: + ipoib_dbg(priv, "CM error %d.\n", event->event); + spin_lock_irqsave(&priv->tx_lock, flags); + spin_lock(&priv->lock); + neigh = tx->neigh; + + if (neigh) { + neigh->cm = NULL; + list_del(&neigh->list); + if (neigh->ah) + ipoib_put_ah(neigh->ah); + ipoib_neigh_free(dev, neigh); + + tx->neigh = NULL; + } + + if (test_and_clear_bit(IPOIB_FLAG_INITIALIZED, &tx->flags)) { + list_move(&tx->list, &priv->cm.reap_list); + queue_work(ipoib_workqueue, &priv->cm.reap_task); + } + + spin_unlock(&priv->lock); + spin_unlock_irqrestore(&priv->tx_lock, flags); + break; + default: + break; + } + + return 0; +} + +struct ipoib_cm_tx *ipoib_cm_create_tx(struct net_device *dev, struct ipoib_path *path, + struct ipoib_neigh *neigh) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ipoib_cm_tx *tx; + + tx = kzalloc(sizeof *tx, GFP_ATOMIC); + if (!tx) + return NULL; + + neigh->cm = tx; + tx->neigh = neigh; + tx->path = path; + tx->dev = dev; + list_add(&tx->list, &priv->cm.start_list); + set_bit(IPOIB_FLAG_INITIALIZED, &tx->flags); + queue_work(ipoib_workqueue, &priv->cm.start_task); + return tx; +} + +void ipoib_cm_destroy_tx(struct ipoib_cm_tx *tx) +{ + struct ipoib_dev_priv *priv = netdev_priv(tx->dev); + if (test_and_clear_bit(IPOIB_FLAG_INITIALIZED, &tx->flags)) { + list_move(&tx->list, &priv->cm.reap_list); + queue_work(ipoib_workqueue, &priv->cm.reap_task); + ipoib_dbg(priv, "Reap connection for gid " IPOIB_GID_FMT "\n", + IPOIB_GID_ARG(tx->neigh->dgid)); + tx->neigh = NULL; + } +} + +static void ipoib_cm_tx_start(struct work_struct *work) +{ + struct ipoib_dev_priv *priv = container_of(work, struct ipoib_dev_priv, + cm.start_task); + struct net_device *dev = priv->dev; + struct ipoib_neigh *neigh; + struct ipoib_cm_tx *p; + unsigned long flags; + int ret; + + struct ib_sa_path_rec pathrec; + u32 qpn; + + spin_lock_irqsave(&priv->tx_lock, flags); + spin_lock(&priv->lock); + while (!list_empty(&priv->cm.start_list)) { + p = list_entry(priv->cm.start_list.next, typeof(*p), list); + list_del_init(&p->list); + neigh = p->neigh; + qpn = IPOIB_QPN(neigh->neighbour->ha); + memcpy(&pathrec, &p->path->pathrec, sizeof pathrec); + spin_unlock(&priv->lock); + spin_unlock_irqrestore(&priv->tx_lock, flags); + ret = ipoib_cm_tx_init(p, qpn, &pathrec); + spin_lock_irqsave(&priv->tx_lock, flags); + spin_lock(&priv->lock); + if (ret) { + neigh = p->neigh; + if (neigh) { + neigh->cm = NULL; + list_del(&neigh->list); + if (neigh->ah) + ipoib_put_ah(neigh->ah); + ipoib_neigh_free(dev, neigh); + } + list_del(&p->list); + kfree(p); + } + } + spin_unlock(&priv->lock); + spin_unlock_irqrestore(&priv->tx_lock, flags); +} + +static void ipoib_cm_tx_reap(struct work_struct *work) +{ + struct ipoib_dev_priv *priv = container_of(work, struct ipoib_dev_priv, + cm.reap_task); + struct ipoib_cm_tx *p; + unsigned long flags; + + spin_lock_irqsave(&priv->tx_lock, flags); + spin_lock(&priv->lock); + while (!list_empty(&priv->cm.reap_list)) { + p = list_entry(priv->cm.reap_list.next, typeof(*p), list); + list_del(&p->list); + spin_unlock(&priv->lock); + spin_unlock_irqrestore(&priv->tx_lock, flags); + ipoib_cm_tx_destroy(p); + spin_lock_irqsave(&priv->tx_lock, flags); + spin_lock(&priv->lock); + } + spin_unlock(&priv->lock); + spin_unlock_irqrestore(&priv->tx_lock, flags); +} + +static void ipoib_cm_skb_reap(struct work_struct *work) +{ + struct ipoib_dev_priv *priv = container_of(work, struct ipoib_dev_priv, + cm.skb_task); + struct net_device *dev = priv->dev; + struct sk_buff *skb; + unsigned long flags; + + unsigned mtu = priv->mcast_mtu; + + spin_lock_irqsave(&priv->tx_lock, flags); + spin_lock(&priv->lock); + while ((skb = skb_dequeue(&priv->cm.skb_queue))) { + spin_unlock(&priv->lock); + spin_unlock_irqrestore(&priv->tx_lock, flags); + if (skb->protocol == htons(ETH_P_IP)) + icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED, htonl(mtu)); +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) + else if (skb->protocol == htons(ETH_P_IPV6)) + icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu, dev); +#endif + dev_kfree_skb_any(skb); + spin_lock_irqsave(&priv->tx_lock, flags); + spin_lock(&priv->lock); + } + spin_unlock(&priv->lock); + spin_unlock_irqrestore(&priv->tx_lock, flags); +} + +void ipoib_cm_skb_too_long(struct net_device* dev, struct sk_buff *skb, + unsigned int mtu) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + int e = skb_queue_empty(&priv->cm.skb_queue); + + if (skb->dst) + skb->dst->ops->update_pmtu(skb->dst, mtu); + + skb_queue_tail(&priv->cm.skb_queue, skb); + if (e) + queue_work(ipoib_workqueue, &priv->cm.skb_task); +} + +static void ipoib_cm_stale_task(struct work_struct *work) +{ + struct ipoib_dev_priv *priv = container_of(work, struct ipoib_dev_priv, + cm.stale_task.work); + struct ipoib_cm_rx *p; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + while (!list_empty(&priv->cm.passive_ids)) { + /* List if sorted by LRU, start from tail, + * stop when we see a recently used entry */ + p = list_entry(priv->cm.passive_ids.prev, typeof(*p), list); + if (time_after_eq(jiffies, p->jiffies + IPOIB_CM_RX_TIMEOUT)) + break; + list_del_init(&p->list); + spin_unlock_irqrestore(&priv->lock, flags); + ib_destroy_cm_id(p->id); + ib_destroy_qp(p->qp); + kfree(p); + spin_lock_irqsave(&priv->lock, flags); + } + spin_unlock_irqrestore(&priv->lock, flags); +} + + +static ssize_t show_mode(struct device *d, struct device_attribute *attr, + char *buf) +{ + struct ipoib_dev_priv *priv = netdev_priv(to_net_dev(d)); + + if (test_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags)) + return sprintf(buf, "connected\n"); + else + return sprintf(buf, "datagram\n"); +} + +static ssize_t set_mode(struct device *d, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct net_device *dev = to_net_dev(d); + struct ipoib_dev_priv *priv = netdev_priv(dev); + + /* flush paths if we switch modes so that connections are restarted */ + if (IPOIB_CM_SUPPORTED(dev->dev_addr) && !strcmp(buf, "connected\n")) { + set_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags); + ipoib_warn(priv, "enabling connected mode " + "will cause multicast packet drops\n"); + ipoib_flush_paths(dev); + return count; + } + + if (!strcmp(buf, "datagram\n")) { + clear_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags); + dev->mtu = min(priv->mcast_mtu, dev->mtu); + ipoib_flush_paths(dev); + return count; + } + + return -EINVAL; +} + +static DEVICE_ATTR(mode, S_IWUGO | S_IRUGO, show_mode, set_mode); + +int ipoib_cm_add_mode_attr(struct net_device *dev) +{ + return device_create_file(&dev->dev, &dev_attr_mode); +} + +int ipoib_cm_dev_init(struct net_device *dev) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ib_srq_init_attr srq_init_attr = { + .attr = { + .max_wr = ipoib_recvq_size, + .max_sge = IPOIB_CM_RX_SG + } + }; + int ret, i; + + INIT_LIST_HEAD(&priv->cm.passive_ids); + INIT_LIST_HEAD(&priv->cm.reap_list); + INIT_LIST_HEAD(&priv->cm.start_list); + INIT_WORK(&priv->cm.start_task, ipoib_cm_tx_start); + INIT_WORK(&priv->cm.reap_task, ipoib_cm_tx_reap); + INIT_WORK(&priv->cm.skb_task, ipoib_cm_skb_reap); + INIT_DELAYED_WORK(&priv->cm.stale_task, ipoib_cm_stale_task); + + skb_queue_head_init(&priv->cm.skb_queue); + + priv->cm.srq = ib_create_srq(priv->pd, &srq_init_attr); + if (IS_ERR(priv->cm.srq)) { + ret = PTR_ERR(priv->cm.srq); + priv->cm.srq = NULL; + return ret; + } + + priv->cm.srq_ring = kzalloc(ipoib_recvq_size * sizeof *priv->cm.srq_ring, + GFP_KERNEL); + if (!priv->cm.srq_ring) { + printk(KERN_WARNING "%s: failed to allocate CM ring (%d entries)\n", + priv->ca->name, ipoib_recvq_size); + ipoib_cm_dev_cleanup(dev); + return -ENOMEM; + } + + for (i = 0; i < IPOIB_CM_RX_SG; ++i) + priv->cm.rx_sge[i].lkey = priv->mr->lkey; + + priv->cm.rx_sge[0].length = IPOIB_CM_HEAD_SIZE; + for (i = 1; i < IPOIB_CM_RX_SG; ++i) + priv->cm.rx_sge[i].length = PAGE_SIZE; + priv->cm.rx_wr.next = NULL; + priv->cm.rx_wr.sg_list = priv->cm.rx_sge; + priv->cm.rx_wr.num_sge = IPOIB_CM_RX_SG; + + for (i = 0; i < ipoib_recvq_size; ++i) { + if (ipoib_cm_alloc_rx_skb(dev, i, priv->cm.srq_ring[i].mapping)) { + ipoib_warn(priv, "failed to allocate receive buffer %d\n", i); + ipoib_cm_dev_cleanup(dev); + return -ENOMEM; + } + if (ipoib_cm_post_receive(dev, i)) { + ipoib_warn(priv, "ipoib_ib_post_receive failed for buf %d\n", i); + ipoib_cm_dev_cleanup(dev); + return -EIO; + } + } + + priv->dev->dev_addr[0] = IPOIB_FLAGS_RC; + return 0; +} + +void ipoib_cm_dev_cleanup(struct net_device *dev) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + int i, ret; + + if (!priv->cm.srq) + return; + + ipoib_dbg(priv, "Cleanup ipoib connected mode.\n"); + + ret = ib_destroy_srq(priv->cm.srq); + if (ret) + ipoib_warn(priv, "ib_destroy_srq failed: %d\n", ret); + + priv->cm.srq = NULL; + if (!priv->cm.srq_ring) + return; + for (i = 0; i < ipoib_recvq_size; ++i) + if (priv->cm.srq_ring[i].skb) { + ipoib_cm_dma_unmap_rx(priv, priv->cm.srq_ring[i].mapping); + dev_kfree_skb_any(priv->cm.srq_ring[i].skb); + priv->cm.srq_ring[i].skb = NULL; + } + kfree(priv->cm.srq_ring); + priv->cm.srq_ring = NULL; +} diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c index 59d9594..f2aa923 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -50,8 +50,6 @@ MODULE_PARM_DESC(data_debug_level, "Enable data path debug tracing if > 0"); #endif -#define IPOIB_OP_RECV (1ul << 31) - static DEFINE_MUTEX(pkey_mutex); struct ipoib_ah *ipoib_create_ah(struct net_device *dev, @@ -268,10 +266,11 @@ static void ipoib_ib_handle_tx_wc(struct net_device *dev, struct ib_wc *wc) spin_lock_irqsave(&priv->tx_lock, flags); ++priv->tx_tail; - if (netif_queue_stopped(dev) && - test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags) && - priv->tx_head - priv->tx_tail <= ipoib_sendq_size >> 1) + if (unlikely(test_bit(IPOIB_FLAG_NETIF_STOPPED, &priv->flags)) && + priv->tx_head - priv->tx_tail <= ipoib_sendq_size >> 1) { + clear_bit(IPOIB_FLAG_NETIF_STOPPED, &priv->flags); netif_wake_queue(dev); + } spin_unlock_irqrestore(&priv->tx_lock, flags); if (wc->status != IB_WC_SUCCESS && @@ -283,7 +282,9 @@ static void ipoib_ib_handle_tx_wc(struct net_device *dev, struct ib_wc *wc) static void ipoib_ib_handle_wc(struct net_device *dev, struct ib_wc *wc) { - if (wc->wr_id & IPOIB_OP_RECV) + if (wc->wr_id & IPOIB_CM_OP_SRQ) + ipoib_cm_handle_rx_wc(dev, wc); + else if (wc->wr_id & IPOIB_OP_RECV) ipoib_ib_handle_rx_wc(dev, wc); else ipoib_ib_handle_tx_wc(dev, wc); @@ -327,12 +328,12 @@ void ipoib_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_tx_buf *tx_req; u64 addr; - if (unlikely(skb->len > dev->mtu + INFINIBAND_ALEN)) { + if (unlikely(skb->len > priv->mcast_mtu + INFINIBAND_ALEN)) { ipoib_warn(priv, "packet len %d (> %d) too long to send, dropping\n", - skb->len, dev->mtu + INFINIBAND_ALEN); + skb->len, priv->mcast_mtu + INFINIBAND_ALEN); ++priv->stats.tx_dropped; ++priv->stats.tx_errors; - dev_kfree_skb_any(skb); + ipoib_cm_skb_too_long(dev, skb, priv->mcast_mtu); return; } @@ -372,6 +373,7 @@ void ipoib_send(struct net_device *dev, struct sk_buff *skb, if (priv->tx_head - priv->tx_tail == ipoib_sendq_size) { ipoib_dbg(priv, "TX ring full, stopping kernel net queue\n"); netif_stop_queue(dev); + set_bit(IPOIB_FLAG_NETIF_STOPPED, &priv->flags); } } } @@ -424,6 +426,13 @@ int ipoib_ib_dev_open(struct net_device *dev) return -1; } + ret = ipoib_cm_dev_open(dev); + if (ret) { + ipoib_warn(priv, "ipoib_ib_post_receives returned %d\n", ret); + ipoib_ib_dev_stop(dev); + return -1; + } + clear_bit(IPOIB_STOP_REAPER, &priv->flags); queue_delayed_work(ipoib_workqueue, &priv->ah_reap_task, HZ); @@ -509,6 +518,8 @@ int ipoib_ib_dev_stop(struct net_device *dev) clear_bit(IPOIB_FLAG_INITIALIZED, &priv->flags); + ipoib_cm_dev_stop(dev); + /* * Move our QP to the error state and then reinitialize in * when all work requests have completed or have been flushed. diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index af5ee2e..18d27fd 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -49,8 +49,6 @@ #include -#define IPOIB_QPN(ha) (be32_to_cpup((__be32 *) ha) & 0xffffff) - MODULE_AUTHOR("Roland Dreier"); MODULE_DESCRIPTION("IP-over-InfiniBand net driver"); MODULE_LICENSE("Dual BSD/GPL"); @@ -145,6 +143,8 @@ static int ipoib_stop(struct net_device *dev) netif_stop_queue(dev); + clear_bit(IPOIB_FLAG_NETIF_STOPPED, &priv->flags); + /* * Now flush workqueue to make sure a scheduled task doesn't * bring our internal state back up. @@ -178,8 +178,18 @@ static int ipoib_change_mtu(struct net_device *dev, int new_mtu) { struct ipoib_dev_priv *priv = netdev_priv(dev); - if (new_mtu > IPOIB_PACKET_SIZE - IPOIB_ENCAP_LEN) + /* dev->mtu > 2K ==> connected mode */ + if (ipoib_cm_admin_enabled(dev) && new_mtu <= IPOIB_CM_MTU) { + if (new_mtu > priv->mcast_mtu) + ipoib_warn(priv, "mtu > %d will cause multicast packet drops.\n", + priv->mcast_mtu); + dev->mtu = new_mtu; + return 0; + } + + if (new_mtu > IPOIB_PACKET_SIZE - IPOIB_ENCAP_LEN) { return -EINVAL; + } priv->admin_mtu = new_mtu; @@ -414,6 +424,20 @@ static void path_rec_completion(int status, memcpy(&neigh->dgid.raw, &path->pathrec.dgid.raw, sizeof(union ib_gid)); + if (ipoib_cm_enabled(dev, neigh->neighbour)) { + if (!ipoib_cm_get(neigh)) + ipoib_cm_set(neigh, ipoib_cm_create_tx(dev, + path, + neigh)); + if (!ipoib_cm_get(neigh)) { + list_del(&neigh->list); + if (neigh->ah) + ipoib_put_ah(neigh->ah); + ipoib_neigh_free(dev, neigh); + continue; + } + } + while ((skb = __skb_dequeue(&neigh->queue))) __skb_queue_tail(&skqueue, skb); } @@ -520,7 +544,25 @@ static void neigh_add_path(struct sk_buff *skb, struct net_device *dev) memcpy(&neigh->dgid.raw, &path->pathrec.dgid.raw, sizeof(union ib_gid)); - ipoib_send(dev, skb, path->ah, IPOIB_QPN(skb->dst->neighbour->ha)); + if (ipoib_cm_enabled(dev, neigh->neighbour)) { + if (!ipoib_cm_get(neigh)) + ipoib_cm_set(neigh, ipoib_cm_create_tx(dev, path, neigh)); + if (!ipoib_cm_get(neigh)) { + list_del(&neigh->list); + if (neigh->ah) + ipoib_put_ah(neigh->ah); + ipoib_neigh_free(dev, neigh); + goto err_drop; + } + if (skb_queue_len(&neigh->queue) < IPOIB_MAX_PATH_REC_QUEUE) + __skb_queue_tail(&neigh->queue, skb); + else { + ipoib_warn(priv, "queue length limit %d. Packet drop.\n", + skb_queue_len(&neigh->queue)); + goto err_drop; + } + } else + ipoib_send(dev, skb, path->ah, IPOIB_QPN(skb->dst->neighbour->ha)); } else { neigh->ah = NULL; @@ -538,6 +580,7 @@ err_list: err_path: ipoib_neigh_free(dev, neigh); +err_drop: ++priv->stats.tx_dropped; dev_kfree_skb_any(skb); @@ -640,7 +683,12 @@ static int ipoib_start_xmit(struct sk_buff *skb, struct net_device *dev) neigh = *to_ipoib_neigh(skb->dst->neighbour); - if (likely(neigh->ah)) { + if (ipoib_cm_get(neigh)) { + if (ipoib_cm_up(neigh)) { + ipoib_cm_send(dev, skb, ipoib_cm_get(neigh)); + goto out; + } + } else if (neigh->ah) { if (unlikely(memcmp(&neigh->dgid.raw, skb->dst->neighbour->ha + 4, sizeof(union ib_gid)))) { @@ -805,6 +853,7 @@ struct ipoib_neigh *ipoib_neigh_alloc(struct neighbour *neighbour) neigh->neighbour = neighbour; *to_ipoib_neigh(neighbour) = neigh; skb_queue_head_init(&neigh->queue); + ipoib_cm_set(neigh, NULL); return neigh; } @@ -818,6 +867,8 @@ void ipoib_neigh_free(struct net_device *dev, struct ipoib_neigh *neigh) ++priv->stats.tx_dropped; dev_kfree_skb_any(skb); } + if (ipoib_cm_get(neigh)) + ipoib_cm_destroy_tx(ipoib_cm_get(neigh)); kfree(neigh); } @@ -1080,6 +1131,8 @@ static struct net_device *ipoib_add_port(const char *format, ipoib_create_debug_files(priv->dev); + if (ipoib_cm_add_mode_attr(priv->dev)) + goto sysfs_failed; if (ipoib_add_pkey_attr(priv->dev)) goto sysfs_failed; if (device_create_file(&priv->dev->dev, &dev_attr_create_child)) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index b04b72c..fea737f 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -597,7 +597,9 @@ void ipoib_mcast_join_task(struct work_struct *work) priv->mcast_mtu = ib_mtu_enum_to_int(priv->broadcast->mcmember.mtu) - IPOIB_ENCAP_LEN; - dev->mtu = min(priv->mcast_mtu, priv->admin_mtu); + + if (!ipoib_cm_admin_enabled(dev)) + dev->mtu = min(priv->mcast_mtu, priv->admin_mtu); ipoib_dbg_mcast(priv, "successfully joined all multicast groups\n"); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c index 7b717c6..3cb551b 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c @@ -168,35 +168,41 @@ int ipoib_transport_dev_init(struct net_device *dev, struct ib_device *ca) .qp_type = IB_QPT_UD }; + int ret, size; + priv->pd = ib_alloc_pd(priv->ca); if (IS_ERR(priv->pd)) { printk(KERN_WARNING "%s: failed to allocate PD\n", ca->name); return -ENODEV; } - priv->cq = ib_create_cq(priv->ca, ipoib_ib_completion, NULL, dev, - ipoib_sendq_size + ipoib_recvq_size + 1); + priv->mr = ib_get_dma_mr(priv->pd, IB_ACCESS_LOCAL_WRITE); + if (IS_ERR(priv->mr)) { + printk(KERN_WARNING "%s: ib_get_dma_mr failed\n", ca->name); + goto out_free_pd; + } + + size = ipoib_sendq_size + ipoib_recvq_size + 1; + ret = ipoib_cm_dev_init(dev); + if (!ret) + size += ipoib_recvq_size; + + priv->cq = ib_create_cq(priv->ca, ipoib_ib_completion, NULL, dev, size); if (IS_ERR(priv->cq)) { printk(KERN_WARNING "%s: failed to create CQ\n", ca->name); - goto out_free_pd; + goto out_free_mr; } if (ib_req_notify_cq(priv->cq, IB_CQ_NEXT_COMP)) goto out_free_cq; - priv->mr = ib_get_dma_mr(priv->pd, IB_ACCESS_LOCAL_WRITE); - if (IS_ERR(priv->mr)) { - printk(KERN_WARNING "%s: ib_get_dma_mr failed\n", ca->name); - goto out_free_cq; - } - init_attr.send_cq = priv->cq; init_attr.recv_cq = priv->cq, priv->qp = ib_create_qp(priv->pd, &init_attr); if (IS_ERR(priv->qp)) { printk(KERN_WARNING "%s: failed to create QP\n", ca->name); - goto out_free_mr; + goto out_free_cq; } priv->dev->dev_addr[1] = (priv->qp->qp_num >> 16) & 0xff; @@ -212,12 +218,12 @@ int ipoib_transport_dev_init(struct net_device *dev, struct ib_device *ca) return 0; -out_free_mr: - ib_dereg_mr(priv->mr); - out_free_cq: ib_destroy_cq(priv->cq); +out_free_mr: + ib_dereg_mr(priv->mr); + out_free_pd: ib_dealloc_pd(priv->pd); return -ENODEV; @@ -235,12 +241,14 @@ void ipoib_transport_dev_cleanup(struct net_device *dev) clear_bit(IPOIB_PKEY_ASSIGNED, &priv->flags); } - if (ib_dereg_mr(priv->mr)) - ipoib_warn(priv, "ib_dereg_mr failed\n"); - if (ib_destroy_cq(priv->cq)) ipoib_warn(priv, "ib_cq_destroy failed\n"); + ipoib_cm_dev_cleanup(dev); + + if (ib_dereg_mr(priv->mr)) + ipoib_warn(priv, "ib_dereg_mr failed\n"); + if (ib_dealloc_pd(priv->pd)) ipoib_warn(priv, "ib_dealloc_pd failed\n"); } diff --git a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c index 085eafe..6762988 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c @@ -115,6 +115,8 @@ int ipoib_vlan_add(struct net_device *pdev, unsigned short pkey) ipoib_create_debug_files(priv->dev); + if (ipoib_cm_add_mode_attr(priv->dev)) + goto sysfs_failed; if (ipoib_add_pkey_attr(priv->dev)) goto sysfs_failed; -- cgit v0.10.2 From 6bdd61d876e6eacea5c59230b6b2d988b22793e6 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 5 Feb 2007 16:21:08 -0800 Subject: IB/mthca: Work around gcc bug on sparc64 For some reason gcc-3.4.5 on sparc64 does: WARNING: "____ilog2_NaN" [drivers/infiniband/hw/mthca/ib_mthca.ko] undefined! Points to note: (1) The asm volatile flush/flushw are just markers for viewing what comes out in the assembly; removing them has no effect on the result. (2) Changing almost anything else in dwh__mthca_arbel_init_srq_context() or dwh__mthca_alloc_srq() causes the problem to go away. The compiler command line issued by the kernel build is: /opt/crosstool/gcc-3.4.5-glibc-2.3.6/sparc64-unknown-linux-gnu/bin/sparc64-unknown-linux-gnu-gcc -fno-strict-aliasing -fno-common -Os -m64 -mno-fpu -mcpu=ultrasparc -mcmodel=medlow -ffixed-g4 -ffixed-g5 -fcall-used-g7 -Wa,--undeclared-regs -pg -fno-omit-frame-pointer -fno-optimize-sibling-calls -fasynchronous-unwind-tables -g -c -o drivers/infiniband/hw/mthca/.tmp_mthca_srq.o drivers/infiniband/hw/mthca/mthca_srq.c This can be reduced to this whilst still retaining the problem: /opt/crosstool/gcc-3.4.5-glibc-2.3.6/sparc64-unknown-linux-gnu/bin/sparc64-unknown-linux-gnu-gcc -m64 -c -o drivers/infiniband/hw/mthca/mthca_srq.o drivers/infiniband/hw/mthca/mthca_srq.c -Os Removing -Os or changing it to -O or -O0 thru -O6 gets rid of the problem. This patch to the kernel code fixes the problem: Cc: "David S. Miller" Signed-off-by: Andrew Morton Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/mthca/mthca_srq.c b/drivers/infiniband/hw/mthca/mthca_srq.c index 10684da..61974b0 100644 --- a/drivers/infiniband/hw/mthca/mthca_srq.c +++ b/drivers/infiniband/hw/mthca/mthca_srq.c @@ -116,11 +116,16 @@ static void mthca_arbel_init_srq_context(struct mthca_dev *dev, struct mthca_srq *srq, struct mthca_arbel_srq_context *context) { - int logsize; + int logsize, max; memset(context, 0, sizeof *context); - logsize = ilog2(srq->max); + /* + * Put max in a temporary variable to work around gcc bug + * triggered by ilog2() on sparc64. + */ + max = srq->max; + logsize = ilog2(max); context->state_logsize_srqn = cpu_to_be32(logsize << 24 | srq->srqn); context->lkey = cpu_to_be32(srq->mr.ibmr.lkey); context->db_index = cpu_to_be32(srq->db_index); -- cgit v0.10.2 From 65e5c0262169a92bdec71a8bb9edb32dab2d8d1f Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Mon, 5 Feb 2007 16:21:09 -0800 Subject: IB/ehca: Fix memleak on module unloading Percpu data is not freed on module unloading. Cc: Heiko Carstens Cc: Christoph Raisch Signed-off-by: Akinobu Mita Signed-off-by: Andrew Morton Acked-by: Hoang-Nam Nguyen Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/ehca/ehca_irq.c b/drivers/infiniband/hw/ehca/ehca_irq.c index c069be8..6c4f9f9 100644 --- a/drivers/infiniband/hw/ehca/ehca_irq.c +++ b/drivers/infiniband/hw/ehca/ehca_irq.c @@ -756,6 +756,8 @@ void ehca_destroy_comp_pool(void) if (cpu_online(i)) destroy_comp_task(pool, i); } + free_percpu(pool->cpu_comp_tasks); + kfree(pool); #endif return; -- cgit v0.10.2 From aedec08050255db1989a38b59616dd973dfe660b Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Mon, 29 Jan 2007 16:41:23 -0800 Subject: RDMA/cma: Increment port number after close to avoid re-use Randomize the starting port number and avoid re-using port values immediately after they are closed. Instead keep track of the last port value used and increment it every time a new port number is assigned, to better replicate other port spaces. Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 9e0ab04..bc31b54 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -71,6 +71,7 @@ static struct workqueue_struct *cma_wq; static DEFINE_IDR(sdp_ps); static DEFINE_IDR(tcp_ps); static DEFINE_IDR(udp_ps); +static int next_port; struct cma_device { struct list_head list; @@ -1722,33 +1723,74 @@ static int cma_alloc_port(struct idr *ps, struct rdma_id_private *id_priv, unsigned short snum) { struct rdma_bind_list *bind_list; - int port, start, ret; + int port, ret; bind_list = kzalloc(sizeof *bind_list, GFP_KERNEL); if (!bind_list) return -ENOMEM; - start = snum ? snum : sysctl_local_port_range[0]; + do { + ret = idr_get_new_above(ps, bind_list, snum, &port); + } while ((ret == -EAGAIN) && idr_pre_get(ps, GFP_KERNEL)); + + if (ret) + goto err1; + + if (port != snum) { + ret = -EADDRNOTAVAIL; + goto err2; + } + + bind_list->ps = ps; + bind_list->port = (unsigned short) port; + cma_bind_port(bind_list, id_priv); + return 0; +err2: + idr_remove(ps, port); +err1: + kfree(bind_list); + return ret; +} +static int cma_alloc_any_port(struct idr *ps, struct rdma_id_private *id_priv) +{ + struct rdma_bind_list *bind_list; + int port, ret; + + bind_list = kzalloc(sizeof *bind_list, GFP_KERNEL); + if (!bind_list) + return -ENOMEM; + +retry: do { - ret = idr_get_new_above(ps, bind_list, start, &port); + ret = idr_get_new_above(ps, bind_list, next_port, &port); } while ((ret == -EAGAIN) && idr_pre_get(ps, GFP_KERNEL)); if (ret) - goto err; + goto err1; - if ((snum && port != snum) || - (!snum && port > sysctl_local_port_range[1])) { - idr_remove(ps, port); + if (port > sysctl_local_port_range[1]) { + if (next_port != sysctl_local_port_range[0]) { + idr_remove(ps, port); + next_port = sysctl_local_port_range[0]; + goto retry; + } ret = -EADDRNOTAVAIL; - goto err; + goto err2; } + if (port == sysctl_local_port_range[1]) + next_port = sysctl_local_port_range[0]; + else + next_port = port + 1; + bind_list->ps = ps; bind_list->port = (unsigned short) port; cma_bind_port(bind_list, id_priv); return 0; -err: +err2: + idr_remove(ps, port); +err1: kfree(bind_list); return ret; } @@ -1811,7 +1853,7 @@ static int cma_get_port(struct rdma_id_private *id_priv) mutex_lock(&lock); if (cma_any_port(&id_priv->id.route.addr.src_addr)) - ret = cma_alloc_port(ps, id_priv, 0); + ret = cma_alloc_any_port(ps, id_priv); else ret = cma_use_port(ps, id_priv); mutex_unlock(&lock); @@ -2448,6 +2490,10 @@ static int cma_init(void) { int ret; + get_random_bytes(&next_port, sizeof next_port); + next_port = (next_port % (sysctl_local_port_range[1] - + sysctl_local_port_range[0])) + + sysctl_local_port_range[0]; cma_wq = create_singlethread_workqueue("rdma_cm_wq"); if (!cma_wq) return -ENOMEM; -- cgit v0.10.2 From c7f743a669c27f9c392e78fda8829db9d6d50f43 Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Thu, 1 Feb 2007 12:23:37 -0800 Subject: IB: Remove redundant "_wq" from workqueue names Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c index d2bb5a9..a91001c 100644 --- a/drivers/infiniband/core/addr.c +++ b/drivers/infiniband/core/addr.c @@ -373,7 +373,7 @@ static struct notifier_block nb = { static int addr_init(void) { - addr_wq = create_singlethread_workqueue("ib_addr_wq"); + addr_wq = create_singlethread_workqueue("ib_addr"); if (!addr_wq) return -ENOMEM; diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index bc31b54..db88e60 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -2494,7 +2494,7 @@ static int cma_init(void) next_port = (next_port % (sysctl_local_port_range[1] - sysctl_local_port_range[0])) + sysctl_local_port_range[0]; - cma_wq = create_singlethread_workqueue("rdma_cm_wq"); + cma_wq = create_singlethread_workqueue("rdma_cm"); if (!cma_wq) return -ENOMEM; -- cgit v0.10.2 From 1c14cfbbe7a9f2240c73f420c3c6336fc521cd64 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 5 Feb 2007 16:09:35 -0800 Subject: [AGPGART] allow drm populated agp memory types cleanups Fix whitespace, braces, use kzalloc(). Cc: Dave Airlie Cc: Thomas Hellstrom Signed-off-by: Andrew Morton Signed-off-by: Dave Jones diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c index a627b77..7923337 100644 --- a/drivers/char/agp/generic.c +++ b/drivers/char/agp/generic.c @@ -112,9 +112,8 @@ void agp_alloc_page_array(size_t size, struct agp_memory *mem) mem->memory = NULL; mem->vmalloc_flag = 0; - if (size <= 2*PAGE_SIZE) { + if (size <= 2*PAGE_SIZE) mem->memory = kmalloc(size, GFP_KERNEL | __GFP_NORETRY); - } if (mem->memory == NULL) { mem->memory = vmalloc(size); mem->vmalloc_flag = 1; @@ -138,12 +137,10 @@ static struct agp_memory *agp_create_user_memory(unsigned long num_agp_pages) struct agp_memory *new; unsigned long alloc_size = num_agp_pages*sizeof(struct page *); - new = kmalloc(sizeof(struct agp_memory), GFP_KERNEL); - + new = kzalloc(sizeof(struct agp_memory), GFP_KERNEL); if (new == NULL) return NULL; - memset(new, 0, sizeof(struct agp_memory)); new->key = agp_get_key(); if (new->key < 0) { @@ -162,7 +159,6 @@ static struct agp_memory *agp_create_user_memory(unsigned long num_agp_pages) return new; } - struct agp_memory *agp_create_memory(int scratch_pages) { struct agp_memory *new; @@ -1071,9 +1067,8 @@ int agp_generic_insert_memory(struct agp_memory * mem, off_t pg_start, int type) num_entries -= agp_memory_reserved/PAGE_SIZE; if (num_entries < 0) num_entries = 0; - if (type != mem->type) { + if (type != mem->type) return -EINVAL; - } mask_type = bridge->driver->agp_type_to_mask_type(bridge, type); if (mask_type != 0) { @@ -1143,14 +1138,12 @@ int agp_generic_remove_memory(struct agp_memory *mem, off_t pg_start, int type) } EXPORT_SYMBOL(agp_generic_remove_memory); - struct agp_memory *agp_generic_alloc_by_type(size_t page_count, int type) { return NULL; } EXPORT_SYMBOL(agp_generic_alloc_by_type); - void agp_generic_free_by_type(struct agp_memory *curr) { agp_free_page_array(curr); @@ -1170,9 +1163,8 @@ struct agp_memory *agp_generic_alloc_user(size_t page_count, int type) if (new == NULL) return NULL; - for (i = 0; i < page_count; i++) { + for (i = 0; i < page_count; i++) new->memory[i] = 0; - } new->page_count = 0; new->type = type; new->num_scratch_pages = pages; @@ -1181,7 +1173,6 @@ struct agp_memory *agp_generic_alloc_user(size_t page_count, int type) } EXPORT_SYMBOL(agp_generic_alloc_user); - /* * Basic Page Allocation Routines - * These routines handle page allocation and by default they reserve the allocated diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 6b9fb21..06b0bb6 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -89,7 +89,6 @@ static struct _intel_i810_private { int num_dcache_entries; } intel_i810_private; - static int intel_i810_fetch_size(void) { u32 smram_miscc; -- cgit v0.10.2 From 86acd49aa128bd7a1d4362c256c21fbdc2d5b1a0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=B3=20Bilski?= Date: Mon, 5 Feb 2007 19:57:25 +0100 Subject: [CPUFREQ] Enhanced PowerSaver driver This is driver for Enhanced Powersaver which is present in VIA C7 processors. Beta tested by Jorgen (jorgen (at) greven dot dk). Thanks! Based on documentation provided by Dave Jones (Thanks!) and C7 Eden datasheet available from www.via.com.tw. Looks like all these C7 Eden CPU's don't have P-states in BIOS. I know that 2 p-states is low, but Jorgen finds it usefull anyway because board is passive cooled. There are 3 different types of C7 processors (called brands): 0. C7-M - these processors can set any maultiplier between min and max, any voltage between min and max. 1. C7 - only min and max states are supported. Voltage is different for min and max states. 2. Eden - only min and max states are supported. Looks like this brand can only change multiplier. Voltage seems to be the same for min and max frequency. Signed-off-by: Rafal Bilski Signed-off-by: Dave Jones diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig index 5299c5b..6c52182 100644 --- a/arch/i386/kernel/cpu/cpufreq/Kconfig +++ b/arch/i386/kernel/cpu/cpufreq/Kconfig @@ -217,6 +217,15 @@ config X86_LONGHAUL If in doubt, say N. +config X86_E_POWERSAVER + tristate "VIA C7 Enhanced PowerSaver (EXPERIMENTAL)" + select CPU_FREQ_TABLE + depends on EXPERIMENTAL + help + This adds the CPUFreq driver for VIA C7 processors. + + If in doubt, say N. + comment "shared options" config X86_ACPI_CPUFREQ_PROC_INTF diff --git a/arch/i386/kernel/cpu/cpufreq/Makefile b/arch/i386/kernel/cpu/cpufreq/Makefile index 8de3abe..560f776 100644 --- a/arch/i386/kernel/cpu/cpufreq/Makefile +++ b/arch/i386/kernel/cpu/cpufreq/Makefile @@ -2,6 +2,7 @@ obj-$(CONFIG_X86_POWERNOW_K6) += powernow-k6.o obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o obj-$(CONFIG_X86_LONGHAUL) += longhaul.o +obj-$(CONFIG_X86_E_POWERSAVER) += e_powersaver.o obj-$(CONFIG_ELAN_CPUFREQ) += elanfreq.o obj-$(CONFIG_SC520_CPUFREQ) += sc520_freq.o obj-$(CONFIG_X86_LONGRUN) += longrun.o diff --git a/arch/i386/kernel/cpu/cpufreq/e_powersaver.c b/arch/i386/kernel/cpu/cpufreq/e_powersaver.c new file mode 100644 index 0000000..3243725 --- /dev/null +++ b/arch/i386/kernel/cpu/cpufreq/e_powersaver.c @@ -0,0 +1,334 @@ +/* + * Based on documentation provided by Dave Jones. Thanks! + * + * Licensed under the terms of the GNU GPL License version 2. + * + * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#define EPS_BRAND_C7M 0 +#define EPS_BRAND_C7 1 +#define EPS_BRAND_EDEN 2 +#define EPS_BRAND_C3 3 + +struct eps_cpu_data { + u32 fsb; + struct cpufreq_frequency_table freq_table[]; +}; + +static struct eps_cpu_data *eps_cpu[NR_CPUS]; + + +static unsigned int eps_get(unsigned int cpu) +{ + struct eps_cpu_data *centaur; + u32 lo, hi; + + if (cpu) + return 0; + centaur = eps_cpu[cpu]; + if (centaur == NULL) + return 0; + + /* Return current frequency */ + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + return centaur->fsb * ((lo >> 8) & 0xff); +} + +static int eps_set_state(struct eps_cpu_data *centaur, + unsigned int cpu, + u32 dest_state) +{ + struct cpufreq_freqs freqs; + u32 lo, hi; + int err = 0; + int i; + + freqs.old = eps_get(cpu); + freqs.new = centaur->fsb * ((dest_state >> 8) & 0xff); + freqs.cpu = cpu; + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + /* Wait while CPU is busy */ + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + i = 0; + while (lo & ((1 << 16) | (1 << 17))) { + udelay(16); + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + i++; + if (unlikely(i > 64)) { + err = -ENODEV; + goto postchange; + } + } + /* Set new multiplier and voltage */ + wrmsr(MSR_IA32_PERF_CTL, dest_state & 0xffff, 0); + /* Wait until transition end */ + i = 0; + do { + udelay(16); + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + i++; + if (unlikely(i > 64)) { + err = -ENODEV; + goto postchange; + } + } while (lo & ((1 << 16) | (1 << 17))); + + /* Return current frequency */ +postchange: + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + freqs.new = centaur->fsb * ((lo >> 8) & 0xff); + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + return err; +} + +static int eps_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct eps_cpu_data *centaur; + unsigned int newstate = 0; + unsigned int cpu = policy->cpu; + unsigned int dest_state; + int ret; + + if (unlikely(eps_cpu[cpu] == NULL)) + return -ENODEV; + centaur = eps_cpu[cpu]; + + if (unlikely(cpufreq_frequency_table_target(policy, + &eps_cpu[cpu]->freq_table[0], + target_freq, + relation, + &newstate))) { + return -EINVAL; + } + + /* Make frequency transition */ + dest_state = centaur->freq_table[newstate].index & 0xffff; + ret = eps_set_state(centaur, cpu, dest_state); + if (ret) + printk(KERN_ERR "eps: Timeout!\n"); + return ret; +} + +static int eps_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, + &eps_cpu[policy->cpu]->freq_table[0]); +} + +static int eps_cpu_init(struct cpufreq_policy *policy) +{ + unsigned int i; + u32 lo, hi; + u64 val; + u8 current_multiplier, current_voltage; + u8 max_multiplier, max_voltage; + u8 min_multiplier, min_voltage; + u8 brand; + u32 fsb; + struct eps_cpu_data *centaur; + struct cpufreq_frequency_table *f_table; + int k, step, voltage; + int ret; + int states; + + if (policy->cpu != 0) + return -ENODEV; + + /* Check brand */ + printk("eps: Detected VIA "); + rdmsr(0x1153, lo, hi); + brand = (((lo >> 2) ^ lo) >> 18) & 3; + switch(brand) { + case EPS_BRAND_C7M: + printk("C7-M\n"); + break; + case EPS_BRAND_C7: + printk("C7\n"); + break; + case EPS_BRAND_EDEN: + printk("Eden\n"); + break; + case EPS_BRAND_C3: + printk("C3\n"); + return -ENODEV; + break; + } + /* Enable Enhanced PowerSaver */ + rdmsrl(MSR_IA32_MISC_ENABLE, val); + if (!(val & 1 << 16)) { + val |= 1 << 16; + wrmsrl(MSR_IA32_MISC_ENABLE, val); + /* Can be locked at 0 */ + rdmsrl(MSR_IA32_MISC_ENABLE, val); + if (!(val & 1 << 16)) { + printk("eps: Can't enable Enhanced PowerSaver\n"); + return -ENODEV; + } + } + + /* Print voltage and multiplier */ + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + current_voltage = lo & 0xff; + printk("eps: Current voltage = %dmV\n", current_voltage * 16 + 700); + current_multiplier = (lo >> 8) & 0xff; + printk("eps: Current multiplier = %d\n", current_multiplier); + + /* Print limits */ + max_voltage = hi & 0xff; + printk("eps: Highest voltage = %dmV\n", max_voltage * 16 + 700); + max_multiplier = (hi >> 8) & 0xff; + printk("eps: Highest multiplier = %d\n", max_multiplier); + min_voltage = (hi >> 16) & 0xff; + printk("eps: Lowest voltage = %dmV\n", min_voltage * 16 + 700); + min_multiplier = (hi >> 24) & 0xff; + printk("eps: Lowest multiplier = %d\n", min_multiplier); + + /* Sanity checks */ + if (current_multiplier == 0 || max_multiplier == 0 + || min_multiplier == 0) + return -EINVAL; + if (current_multiplier > max_multiplier + || max_multiplier <= min_multiplier) + return -EINVAL; + if (current_voltage > 0x1c || max_voltage > 0x1c) + return -EINVAL; + if (max_voltage < min_voltage) + return -EINVAL; + + /* Calc FSB speed */ + fsb = cpu_khz / current_multiplier; + /* Calc number of p-states supported */ + if (brand == EPS_BRAND_C7M) + states = max_multiplier - min_multiplier + 1; + else + states = 2; + + /* Allocate private data and frequency table for current cpu */ + centaur = kzalloc(sizeof(struct eps_cpu_data) + + (states + 1) * sizeof(struct cpufreq_frequency_table), + GFP_KERNEL); + if (!centaur) + return -ENOMEM; + eps_cpu[0] = centaur; + + /* Copy basic values */ + centaur->fsb = fsb; + + /* Fill frequency and MSR value table */ + f_table = ¢aur->freq_table[0]; + if (brand == EPS_BRAND_EDEN) { + f_table[0].frequency = fsb * min_multiplier; + f_table[0].index = (min_multiplier << 8) | min_voltage; + f_table[1].frequency = fsb * max_multiplier; + f_table[1].index = (max_multiplier << 8) | max_voltage; + f_table[2].frequency = CPUFREQ_TABLE_END; + } else { + k = 0; + step = ((max_voltage - min_voltage) * 256) + / (max_multiplier - min_multiplier); + for (i = min_multiplier; i <= max_multiplier; i++) { + voltage = (k * step) / 256 + min_voltage; + f_table[k].frequency = fsb * i; + f_table[k].index = (i << 8) | voltage; + k++; + } + f_table[k].frequency = CPUFREQ_TABLE_END; + } + + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.transition_latency = 140000; /* 844mV -> 700mV in ns */ + policy->cur = fsb * current_multiplier; + + ret = cpufreq_frequency_table_cpuinfo(policy, ¢aur->freq_table[0]); + if (ret) { + kfree(centaur); + return ret; + } + + cpufreq_frequency_table_get_attr(¢aur->freq_table[0], policy->cpu); + return 0; +} + +static int eps_cpu_exit(struct cpufreq_policy *policy) +{ + unsigned int cpu = policy->cpu; + struct eps_cpu_data *centaur; + u32 lo, hi; + + if (eps_cpu[cpu] == NULL) + return -ENODEV; + centaur = eps_cpu[cpu]; + + /* Get max frequency */ + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + /* Set max frequency */ + eps_set_state(centaur, cpu, hi & 0xffff); + /* Bye */ + cpufreq_frequency_table_put_attr(policy->cpu); + kfree(eps_cpu[cpu]); + eps_cpu[cpu] = NULL; + return 0; +} + +static struct freq_attr* eps_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver eps_driver = { + .verify = eps_verify, + .target = eps_target, + .init = eps_cpu_init, + .exit = eps_cpu_exit, + .get = eps_get, + .name = "e_powersaver", + .owner = THIS_MODULE, + .attr = eps_attr, +}; + +static int __init eps_init(void) +{ + struct cpuinfo_x86 *c = cpu_data; + + /* This driver will work only on Centaur C7 processors with + * Enhanced SpeedStep/PowerSaver registers */ + if (c->x86_vendor != X86_VENDOR_CENTAUR + || c->x86 != 6 || c->x86_model != 10) + return -ENODEV; + if (!cpu_has(c, X86_FEATURE_EST)) + return -ENODEV; + + if (cpufreq_register_driver(&eps_driver)) + return -EINVAL; + return 0; +} + +static void __exit eps_exit(void) +{ + cpufreq_unregister_driver(&eps_driver); +} + +MODULE_AUTHOR("Rafa³ Bilski "); +MODULE_DESCRIPTION("Enhanced PowerSaver driver for VIA C7 CPU's."); +MODULE_LICENSE("GPL"); + +module_init(eps_init); +module_exit(eps_exit); -- cgit v0.10.2 From c120069779e3e35917c15393cf2847fa79811eb6 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Mon, 5 Feb 2007 16:12:43 -0800 Subject: [CPUFREQ] Remove hotplug cpu crap The hotplug CPU locking in cpufreq is horrendous. No-one seems to care enough to fix it, so just remove it so that the 99.9% of the real world users of this code can use cpufreq without being bothered by warnings. Signed-off-by: Andrew Morton Signed-off-by: Dave Jones diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index a45cc89..9bdcdbd 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -415,12 +415,10 @@ static ssize_t store_##file_name \ if (ret != 1) \ return -EINVAL; \ \ - lock_cpu_hotplug(); \ mutex_lock(&policy->lock); \ ret = __cpufreq_set_policy(policy, &new_policy); \ policy->user_policy.object = policy->object; \ mutex_unlock(&policy->lock); \ - unlock_cpu_hotplug(); \ \ return ret ? ret : count; \ } @@ -479,8 +477,6 @@ static ssize_t store_scaling_governor (struct cpufreq_policy * policy, &new_policy.governor)) return -EINVAL; - lock_cpu_hotplug(); - /* Do not use cpufreq_set_policy here or the user_policy.max will be wrongly overridden */ mutex_lock(&policy->lock); @@ -490,8 +486,6 @@ static ssize_t store_scaling_governor (struct cpufreq_policy * policy, policy->user_policy.governor = policy->governor; mutex_unlock(&policy->lock); - unlock_cpu_hotplug(); - if (ret) return ret; else @@ -1278,7 +1272,6 @@ EXPORT_SYMBOL(cpufreq_unregister_notifier); *********************************************************************/ -/* Must be called with lock_cpu_hotplug held */ int __cpufreq_driver_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) @@ -1304,13 +1297,11 @@ int cpufreq_driver_target(struct cpufreq_policy *policy, if (!policy) return -EINVAL; - lock_cpu_hotplug(); mutex_lock(&policy->lock); ret = __cpufreq_driver_target(policy, target_freq, relation); mutex_unlock(&policy->lock); - unlock_cpu_hotplug(); cpufreq_cpu_put(policy); return ret; @@ -1338,7 +1329,6 @@ int cpufreq_driver_getavg(struct cpufreq_policy *policy) EXPORT_SYMBOL_GPL(cpufreq_driver_getavg); /* - * Locking: Must be called with the lock_cpu_hotplug() lock held * when "event" is CPUFREQ_GOV_LIMITS */ @@ -1433,7 +1423,6 @@ EXPORT_SYMBOL(cpufreq_get_policy); /* * data : current policy. * policy : policy to be set. - * Locking: Must be called with the lock_cpu_hotplug() lock held */ static int __cpufreq_set_policy(struct cpufreq_policy *data, struct cpufreq_policy *policy) @@ -1539,8 +1528,6 @@ int cpufreq_set_policy(struct cpufreq_policy *policy) if (!data) return -EINVAL; - lock_cpu_hotplug(); - /* lock this CPU */ mutex_lock(&data->lock); @@ -1552,7 +1539,6 @@ int cpufreq_set_policy(struct cpufreq_policy *policy) mutex_unlock(&data->lock); - unlock_cpu_hotplug(); cpufreq_cpu_put(data); return ret; @@ -1576,7 +1562,6 @@ int cpufreq_update_policy(unsigned int cpu) if (!data) return -ENODEV; - lock_cpu_hotplug(); mutex_lock(&data->lock); dprintk("updating policy for CPU %u\n", cpu); @@ -1603,7 +1588,6 @@ int cpufreq_update_policy(unsigned int cpu) ret = __cpufreq_set_policy(data, &policy); mutex_unlock(&data->lock); - unlock_cpu_hotplug(); cpufreq_cpu_put(data); return ret; } diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c index eef0270..787e841 100644 --- a/drivers/cpufreq/cpufreq_conservative.c +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -430,14 +430,12 @@ static void dbs_check_cpu(int cpu) static void do_dbs_timer(struct work_struct *work) { int i; - lock_cpu_hotplug(); mutex_lock(&dbs_mutex); for_each_online_cpu(i) dbs_check_cpu(i); schedule_delayed_work(&dbs_work, usecs_to_jiffies(dbs_tuners_ins.sampling_rate)); mutex_unlock(&dbs_mutex); - unlock_cpu_hotplug(); } static inline void dbs_timer_init(void) diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index f697449..d52f9b4 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -440,9 +440,7 @@ static void do_dbs_timer(struct work_struct *work) dbs_info->sample_type = DBS_NORMAL_SAMPLE; if (!dbs_tuners_ins.powersave_bias || sample_type == DBS_NORMAL_SAMPLE) { - lock_cpu_hotplug(); dbs_check_cpu(dbs_info); - unlock_cpu_hotplug(); if (dbs_info->freq_lo) { /* Setup timer for SUB_SAMPLE */ dbs_info->sample_type = DBS_SUB_SAMPLE; diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c index 91ad342..d1c7cac 100644 --- a/drivers/cpufreq/cpufreq_stats.c +++ b/drivers/cpufreq/cpufreq_stats.c @@ -370,12 +370,10 @@ __exit cpufreq_stats_exit(void) cpufreq_unregister_notifier(¬ifier_trans_block, CPUFREQ_TRANSITION_NOTIFIER); unregister_hotcpu_notifier(&cpufreq_stat_cpu_notifier); - lock_cpu_hotplug(); for_each_online_cpu(cpu) { cpufreq_stat_cpu_callback(&cpufreq_stat_cpu_notifier, CPU_DEAD, (void *)(long)cpu); } - unlock_cpu_hotplug(); } MODULE_AUTHOR ("Zou Nan hai "); diff --git a/drivers/cpufreq/cpufreq_userspace.c b/drivers/cpufreq/cpufreq_userspace.c index 2a4eb0b..860345c 100644 --- a/drivers/cpufreq/cpufreq_userspace.c +++ b/drivers/cpufreq/cpufreq_userspace.c @@ -71,7 +71,6 @@ static int cpufreq_set(unsigned int freq, struct cpufreq_policy *policy) dprintk("cpufreq_set for cpu %u, freq %u kHz\n", policy->cpu, freq); - lock_cpu_hotplug(); mutex_lock(&userspace_mutex); if (!cpu_is_managed[policy->cpu]) goto err; @@ -94,7 +93,6 @@ static int cpufreq_set(unsigned int freq, struct cpufreq_policy *policy) err: mutex_unlock(&userspace_mutex); - unlock_cpu_hotplug(); return ret; } -- cgit v0.10.2 From 5a01f2e8f3ac134e24144d74bb48a60236f7024d Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Mon, 5 Feb 2007 16:12:44 -0800 Subject: [CPUFREQ] Rewrite lock in cpufreq to eliminate cpufreq/hotplug related issues Yet another attempt to resolve cpufreq and hotplug locking issues. Patchset has 3 patches: * Rewrite the lock infrastructure of cpufreq using a per cpu rwsem. * Minor restructuring of work callback in ondemand driver. * Use the new cpufreq rwsem infrastructure in ondemand work. This patch: Convert policy->lock to rwsem and move it to per_cpu area. This rwsem will protect against both changing/accessing policy related parameters and CPU hot plug/unplug. [malattia@linux.it: fix oops in kref_put()] Cc: Gautham R Shenoy Signed-off-by: Venkatesh Pallipadi Cc: Gautham R Shenoy Signed-off-by: Mattia Dongili Signed-off-by: Andrew Morton Signed-off-by: Dave Jones diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 9bdcdbd..f52facc 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -41,8 +41,67 @@ static struct cpufreq_driver *cpufreq_driver; static struct cpufreq_policy *cpufreq_cpu_data[NR_CPUS]; static DEFINE_SPINLOCK(cpufreq_driver_lock); +/* + * cpu_policy_rwsem is a per CPU reader-writer semaphore designed to cure + * all cpufreq/hotplug/workqueue/etc related lock issues. + * + * The rules for this semaphore: + * - Any routine that wants to read from the policy structure will + * do a down_read on this semaphore. + * - Any routine that will write to the policy structure and/or may take away + * the policy altogether (eg. CPU hotplug), will hold this lock in write + * mode before doing so. + * + * Additional rules: + * - All holders of the lock should check to make sure that the CPU they + * are concerned with are online after they get the lock. + * - Governor routines that can be called in cpufreq hotplug path should not + * take this sem as top level hotplug notifier handler takes this. + */ +static DEFINE_PER_CPU(int, policy_cpu); +static DEFINE_PER_CPU(struct rw_semaphore, cpu_policy_rwsem); + +#define lock_policy_rwsem(mode, cpu) \ +int lock_policy_rwsem_##mode \ +(int cpu) \ +{ \ + int policy_cpu = per_cpu(policy_cpu, cpu); \ + BUG_ON(policy_cpu == -1); \ + down_##mode(&per_cpu(cpu_policy_rwsem, policy_cpu)); \ + if (unlikely(!cpu_online(cpu))) { \ + up_##mode(&per_cpu(cpu_policy_rwsem, policy_cpu)); \ + return -1; \ + } \ + \ + return 0; \ +} + +lock_policy_rwsem(read, cpu); +EXPORT_SYMBOL_GPL(lock_policy_rwsem_read); + +lock_policy_rwsem(write, cpu); +EXPORT_SYMBOL_GPL(lock_policy_rwsem_write); + +void unlock_policy_rwsem_read(int cpu) +{ + int policy_cpu = per_cpu(policy_cpu, cpu); + BUG_ON(policy_cpu == -1); + up_read(&per_cpu(cpu_policy_rwsem, policy_cpu)); +} +EXPORT_SYMBOL_GPL(unlock_policy_rwsem_read); + +void unlock_policy_rwsem_write(int cpu) +{ + int policy_cpu = per_cpu(policy_cpu, cpu); + BUG_ON(policy_cpu == -1); + up_write(&per_cpu(cpu_policy_rwsem, policy_cpu)); +} +EXPORT_SYMBOL_GPL(unlock_policy_rwsem_write); + + /* internal prototypes */ static int __cpufreq_governor(struct cpufreq_policy *policy, unsigned int event); +static unsigned int __cpufreq_get(unsigned int cpu); static void handle_update(struct work_struct *work); /** @@ -415,10 +474,8 @@ static ssize_t store_##file_name \ if (ret != 1) \ return -EINVAL; \ \ - mutex_lock(&policy->lock); \ ret = __cpufreq_set_policy(policy, &new_policy); \ policy->user_policy.object = policy->object; \ - mutex_unlock(&policy->lock); \ \ return ret ? ret : count; \ } @@ -432,7 +489,7 @@ store_one(scaling_max_freq,max); static ssize_t show_cpuinfo_cur_freq (struct cpufreq_policy * policy, char *buf) { - unsigned int cur_freq = cpufreq_get(policy->cpu); + unsigned int cur_freq = __cpufreq_get(policy->cpu); if (!cur_freq) return sprintf(buf, ""); return sprintf(buf, "%u\n", cur_freq); @@ -479,12 +536,10 @@ static ssize_t store_scaling_governor (struct cpufreq_policy * policy, /* Do not use cpufreq_set_policy here or the user_policy.max will be wrongly overridden */ - mutex_lock(&policy->lock); ret = __cpufreq_set_policy(policy, &new_policy); policy->user_policy.policy = policy->policy; policy->user_policy.governor = policy->governor; - mutex_unlock(&policy->lock); if (ret) return ret; @@ -589,11 +644,17 @@ static ssize_t show(struct kobject * kobj, struct attribute * attr ,char * buf) policy = cpufreq_cpu_get(policy->cpu); if (!policy) return -EINVAL; + + if (lock_policy_rwsem_read(policy->cpu) < 0) + return -EINVAL; + if (fattr->show) ret = fattr->show(policy, buf); else ret = -EIO; + unlock_policy_rwsem_read(policy->cpu); + cpufreq_cpu_put(policy); return ret; } @@ -607,11 +668,17 @@ static ssize_t store(struct kobject * kobj, struct attribute * attr, policy = cpufreq_cpu_get(policy->cpu); if (!policy) return -EINVAL; + + if (lock_policy_rwsem_write(policy->cpu) < 0) + return -EINVAL; + if (fattr->store) ret = fattr->store(policy, buf, count); else ret = -EIO; + unlock_policy_rwsem_write(policy->cpu); + cpufreq_cpu_put(policy); return ret; } @@ -685,8 +752,10 @@ static int cpufreq_add_dev (struct sys_device * sys_dev) policy->cpu = cpu; policy->cpus = cpumask_of_cpu(cpu); - mutex_init(&policy->lock); - mutex_lock(&policy->lock); + /* Initially set CPU itself as the policy_cpu */ + per_cpu(policy_cpu, cpu) = cpu; + lock_policy_rwsem_write(cpu); + init_completion(&policy->kobj_unregister); INIT_WORK(&policy->update, handle_update); @@ -696,7 +765,7 @@ static int cpufreq_add_dev (struct sys_device * sys_dev) ret = cpufreq_driver->init(policy); if (ret) { dprintk("initialization failed\n"); - mutex_unlock(&policy->lock); + unlock_policy_rwsem_write(cpu); goto err_out; } @@ -710,6 +779,14 @@ static int cpufreq_add_dev (struct sys_device * sys_dev) */ managed_policy = cpufreq_cpu_get(j); if (unlikely(managed_policy)) { + + /* Set proper policy_cpu */ + unlock_policy_rwsem_write(cpu); + per_cpu(policy_cpu, cpu) = managed_policy->cpu; + + if (lock_policy_rwsem_write(cpu) < 0) + goto err_out_driver_exit; + spin_lock_irqsave(&cpufreq_driver_lock, flags); managed_policy->cpus = policy->cpus; cpufreq_cpu_data[cpu] = managed_policy; @@ -720,13 +797,13 @@ static int cpufreq_add_dev (struct sys_device * sys_dev) &managed_policy->kobj, "cpufreq"); if (ret) { - mutex_unlock(&policy->lock); + unlock_policy_rwsem_write(cpu); goto err_out_driver_exit; } cpufreq_debug_enable_ratelimit(); - mutex_unlock(&policy->lock); ret = 0; + unlock_policy_rwsem_write(cpu); goto err_out_driver_exit; /* call driver->exit() */ } } @@ -740,7 +817,7 @@ static int cpufreq_add_dev (struct sys_device * sys_dev) ret = kobject_register(&policy->kobj); if (ret) { - mutex_unlock(&policy->lock); + unlock_policy_rwsem_write(cpu); goto err_out_driver_exit; } /* set up files for this cpu device */ @@ -755,8 +832,10 @@ static int cpufreq_add_dev (struct sys_device * sys_dev) sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr); spin_lock_irqsave(&cpufreq_driver_lock, flags); - for_each_cpu_mask(j, policy->cpus) + for_each_cpu_mask(j, policy->cpus) { cpufreq_cpu_data[j] = policy; + per_cpu(policy_cpu, j) = policy->cpu; + } spin_unlock_irqrestore(&cpufreq_driver_lock, flags); /* symlink affected CPUs */ @@ -772,14 +851,14 @@ static int cpufreq_add_dev (struct sys_device * sys_dev) ret = sysfs_create_link(&cpu_sys_dev->kobj, &policy->kobj, "cpufreq"); if (ret) { - mutex_unlock(&policy->lock); + unlock_policy_rwsem_write(cpu); goto err_out_unregister; } } policy->governor = NULL; /* to assure that the starting sequence is * run in cpufreq_set_policy */ - mutex_unlock(&policy->lock); + unlock_policy_rwsem_write(cpu); /* set default policy */ ret = cpufreq_set_policy(&new_policy); @@ -820,11 +899,13 @@ module_out: /** - * cpufreq_remove_dev - remove a CPU device + * __cpufreq_remove_dev - remove a CPU device * * Removes the cpufreq interface for a CPU device. + * Caller should already have policy_rwsem in write mode for this CPU. + * This routine frees the rwsem before returning. */ -static int cpufreq_remove_dev (struct sys_device * sys_dev) +static int __cpufreq_remove_dev (struct sys_device * sys_dev) { unsigned int cpu = sys_dev->id; unsigned long flags; @@ -843,6 +924,7 @@ static int cpufreq_remove_dev (struct sys_device * sys_dev) if (!data) { spin_unlock_irqrestore(&cpufreq_driver_lock, flags); cpufreq_debug_enable_ratelimit(); + unlock_policy_rwsem_write(cpu); return -EINVAL; } cpufreq_cpu_data[cpu] = NULL; @@ -859,6 +941,7 @@ static int cpufreq_remove_dev (struct sys_device * sys_dev) sysfs_remove_link(&sys_dev->kobj, "cpufreq"); cpufreq_cpu_put(data); cpufreq_debug_enable_ratelimit(); + unlock_policy_rwsem_write(cpu); return 0; } #endif @@ -867,6 +950,7 @@ static int cpufreq_remove_dev (struct sys_device * sys_dev) if (!kobject_get(&data->kobj)) { spin_unlock_irqrestore(&cpufreq_driver_lock, flags); cpufreq_debug_enable_ratelimit(); + unlock_policy_rwsem_write(cpu); return -EFAULT; } @@ -900,10 +984,10 @@ static int cpufreq_remove_dev (struct sys_device * sys_dev) spin_unlock_irqrestore(&cpufreq_driver_lock, flags); #endif - mutex_lock(&data->lock); if (cpufreq_driver->target) __cpufreq_governor(data, CPUFREQ_GOV_STOP); - mutex_unlock(&data->lock); + + unlock_policy_rwsem_write(cpu); kobject_unregister(&data->kobj); @@ -927,6 +1011,18 @@ static int cpufreq_remove_dev (struct sys_device * sys_dev) } +static int cpufreq_remove_dev (struct sys_device * sys_dev) +{ + unsigned int cpu = sys_dev->id; + int retval; + if (unlikely(lock_policy_rwsem_write(cpu))) + BUG(); + + retval = __cpufreq_remove_dev(sys_dev); + return retval; +} + + static void handle_update(struct work_struct *work) { struct cpufreq_policy *policy = @@ -974,9 +1070,12 @@ unsigned int cpufreq_quick_get(unsigned int cpu) unsigned int ret_freq = 0; if (policy) { - mutex_lock(&policy->lock); + if (unlikely(lock_policy_rwsem_read(cpu))) + return ret_freq; + ret_freq = policy->cur; - mutex_unlock(&policy->lock); + + unlock_policy_rwsem_read(cpu); cpufreq_cpu_put(policy); } @@ -985,24 +1084,13 @@ unsigned int cpufreq_quick_get(unsigned int cpu) EXPORT_SYMBOL(cpufreq_quick_get); -/** - * cpufreq_get - get the current CPU frequency (in kHz) - * @cpu: CPU number - * - * Get the CPU current (static) CPU frequency - */ -unsigned int cpufreq_get(unsigned int cpu) +static unsigned int __cpufreq_get(unsigned int cpu) { - struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); + struct cpufreq_policy *policy = cpufreq_cpu_data[cpu]; unsigned int ret_freq = 0; - if (!policy) - return 0; - if (!cpufreq_driver->get) - goto out; - - mutex_lock(&policy->lock); + return (ret_freq); ret_freq = cpufreq_driver->get(cpu); @@ -1016,11 +1104,33 @@ unsigned int cpufreq_get(unsigned int cpu) } } - mutex_unlock(&policy->lock); + return (ret_freq); +} -out: - cpufreq_cpu_put(policy); +/** + * cpufreq_get - get the current CPU frequency (in kHz) + * @cpu: CPU number + * + * Get the CPU current (static) CPU frequency + */ +unsigned int cpufreq_get(unsigned int cpu) +{ + unsigned int ret_freq = 0; + struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); + + if (!policy) + goto out; + + if (unlikely(lock_policy_rwsem_read(cpu))) + goto out_policy; + + ret_freq = __cpufreq_get(cpu); + + unlock_policy_rwsem_read(cpu); +out_policy: + cpufreq_cpu_put(policy); +out: return (ret_freq); } EXPORT_SYMBOL(cpufreq_get); @@ -1297,18 +1407,19 @@ int cpufreq_driver_target(struct cpufreq_policy *policy, if (!policy) return -EINVAL; - mutex_lock(&policy->lock); + if (unlikely(lock_policy_rwsem_write(policy->cpu))) + return -EINVAL; ret = __cpufreq_driver_target(policy, target_freq, relation); - mutex_unlock(&policy->lock); + unlock_policy_rwsem_write(policy->cpu); cpufreq_cpu_put(policy); return ret; } EXPORT_SYMBOL_GPL(cpufreq_driver_target); -int cpufreq_driver_getavg(struct cpufreq_policy *policy) +int __cpufreq_driver_getavg(struct cpufreq_policy *policy) { int ret = 0; @@ -1316,17 +1427,13 @@ int cpufreq_driver_getavg(struct cpufreq_policy *policy) if (!policy) return -EINVAL; - mutex_lock(&policy->lock); - if (cpu_online(policy->cpu) && cpufreq_driver->getavg) ret = cpufreq_driver->getavg(policy->cpu); - mutex_unlock(&policy->lock); - cpufreq_cpu_put(policy); return ret; } -EXPORT_SYMBOL_GPL(cpufreq_driver_getavg); +EXPORT_SYMBOL_GPL(__cpufreq_driver_getavg); /* * when "event" is CPUFREQ_GOV_LIMITS @@ -1410,9 +1517,7 @@ int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu) if (!cpu_policy) return -EINVAL; - mutex_lock(&cpu_policy->lock); memcpy(policy, cpu_policy, sizeof(struct cpufreq_policy)); - mutex_unlock(&cpu_policy->lock); cpufreq_cpu_put(cpu_policy); return 0; @@ -1528,8 +1633,9 @@ int cpufreq_set_policy(struct cpufreq_policy *policy) if (!data) return -EINVAL; - /* lock this CPU */ - mutex_lock(&data->lock); + if (unlikely(lock_policy_rwsem_write(policy->cpu))) + return -EINVAL; + ret = __cpufreq_set_policy(data, policy); data->user_policy.min = data->min; @@ -1537,7 +1643,7 @@ int cpufreq_set_policy(struct cpufreq_policy *policy) data->user_policy.policy = data->policy; data->user_policy.governor = data->governor; - mutex_unlock(&data->lock); + unlock_policy_rwsem_write(policy->cpu); cpufreq_cpu_put(data); @@ -1562,7 +1668,8 @@ int cpufreq_update_policy(unsigned int cpu) if (!data) return -ENODEV; - mutex_lock(&data->lock); + if (unlikely(lock_policy_rwsem_write(cpu))) + return -EINVAL; dprintk("updating policy for CPU %u\n", cpu); memcpy(&policy, data, sizeof(struct cpufreq_policy)); @@ -1587,7 +1694,8 @@ int cpufreq_update_policy(unsigned int cpu) ret = __cpufreq_set_policy(data, &policy); - mutex_unlock(&data->lock); + unlock_policy_rwsem_write(cpu); + cpufreq_cpu_put(data); return ret; } @@ -1597,31 +1705,28 @@ static int cpufreq_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { unsigned int cpu = (unsigned long)hcpu; - struct cpufreq_policy *policy; struct sys_device *sys_dev; + struct cpufreq_policy *policy; sys_dev = get_cpu_sysdev(cpu); - if (sys_dev) { switch (action) { case CPU_ONLINE: cpufreq_add_dev(sys_dev); break; case CPU_DOWN_PREPARE: - /* - * We attempt to put this cpu in lowest frequency - * possible before going down. This will permit - * hardware-managed P-State to switch other related - * threads to min or higher speeds if possible. - */ + if (unlikely(lock_policy_rwsem_write(cpu))) + BUG(); + policy = cpufreq_cpu_data[cpu]; if (policy) { - cpufreq_driver_target(policy, policy->min, + __cpufreq_driver_target(policy, policy->min, CPUFREQ_RELATION_H); } + __cpufreq_remove_dev(sys_dev); break; - case CPU_DEAD: - cpufreq_remove_dev(sys_dev); + case CPU_DOWN_FAILED: + cpufreq_add_dev(sys_dev); break; } } @@ -1735,3 +1840,16 @@ int cpufreq_unregister_driver(struct cpufreq_driver *driver) return 0; } EXPORT_SYMBOL_GPL(cpufreq_unregister_driver); + +static int __init cpufreq_core_init(void) +{ + int cpu; + + for_each_possible_cpu(cpu) { + per_cpu(policy_cpu, cpu) = -1; + init_rwsem(&per_cpu(cpu_policy_rwsem, cpu)); + } + return 0; +} + +core_initcall(cpufreq_core_init); diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 7f008f6..0899e2c 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -84,9 +84,6 @@ struct cpufreq_policy { unsigned int policy; /* see above */ struct cpufreq_governor *governor; /* see below */ - struct mutex lock; /* CPU ->setpolicy or ->target may - only be called once a time */ - struct work_struct update; /* if update_policy() needs to be * called, but you're in IRQ context */ @@ -172,11 +169,16 @@ extern int __cpufreq_driver_target(struct cpufreq_policy *policy, unsigned int relation); -extern int cpufreq_driver_getavg(struct cpufreq_policy *policy); +extern int __cpufreq_driver_getavg(struct cpufreq_policy *policy); int cpufreq_register_governor(struct cpufreq_governor *governor); void cpufreq_unregister_governor(struct cpufreq_governor *governor); +int lock_policy_rwsem_read(int cpu); +int lock_policy_rwsem_write(int cpu); +void unlock_policy_rwsem_read(int cpu); +void unlock_policy_rwsem_write(int cpu); + /********************************************************************* * CPUFREQ DRIVER INTERFACE * -- cgit v0.10.2 From 529af7a14f04f92213bac371931a2b2b060c63fa Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Mon, 5 Feb 2007 16:12:44 -0800 Subject: [CPUFREQ] ondemand governor restructure the work callback Restructure the delayed_work callback in ondemand. This eliminates the need for smp_processor_id in the callback function and also helps in proper locking and avoiding flush_workqueue when stopping the governor (done in subsequent patch). Signed-off-by: Venkatesh Pallipadi Cc: Gautham R Shenoy Signed-off-by: Andrew Morton Signed-off-by: Dave Jones diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index d52f9b4..a480834 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -52,19 +52,20 @@ static unsigned int def_sampling_rate; static void do_dbs_timer(struct work_struct *work); /* Sampling types */ -enum dbs_sample {DBS_NORMAL_SAMPLE, DBS_SUB_SAMPLE}; +enum {DBS_NORMAL_SAMPLE, DBS_SUB_SAMPLE}; struct cpu_dbs_info_s { cputime64_t prev_cpu_idle; cputime64_t prev_cpu_wall; struct cpufreq_policy *cur_policy; struct delayed_work work; - enum dbs_sample sample_type; - unsigned int enable; struct cpufreq_frequency_table *freq_table; unsigned int freq_lo; unsigned int freq_lo_jiffies; unsigned int freq_hi_jiffies; + int cpu; + unsigned int enable:1, + sample_type:1; }; static DEFINE_PER_CPU(struct cpu_dbs_info_s, cpu_dbs_info); @@ -402,7 +403,7 @@ static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info) if (load < (dbs_tuners_ins.up_threshold - 10)) { unsigned int freq_next, freq_cur; - freq_cur = cpufreq_driver_getavg(policy); + freq_cur = __cpufreq_driver_getavg(policy); if (!freq_cur) freq_cur = policy->cur; @@ -423,9 +424,11 @@ static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info) static void do_dbs_timer(struct work_struct *work) { - unsigned int cpu = smp_processor_id(); - struct cpu_dbs_info_s *dbs_info = &per_cpu(cpu_dbs_info, cpu); - enum dbs_sample sample_type = dbs_info->sample_type; + struct cpu_dbs_info_s *dbs_info = + container_of(work, struct cpu_dbs_info_s, work.work); + unsigned int cpu = dbs_info->cpu; + int sample_type = dbs_info->sample_type; + /* We want all CPUs to do sampling nearly on same jiffy */ int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate); @@ -454,17 +457,17 @@ static void do_dbs_timer(struct work_struct *work) queue_delayed_work_on(cpu, kondemand_wq, &dbs_info->work, delay); } -static inline void dbs_timer_init(unsigned int cpu) +static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) { - struct cpu_dbs_info_s *dbs_info = &per_cpu(cpu_dbs_info, cpu); /* We want all CPUs to do sampling nearly on same jiffy */ int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate); delay -= jiffies % delay; ondemand_powersave_bias_init(); - INIT_DELAYED_WORK_NAR(&dbs_info->work, do_dbs_timer); dbs_info->sample_type = DBS_NORMAL_SAMPLE; - queue_delayed_work_on(cpu, kondemand_wq, &dbs_info->work, delay); + INIT_DELAYED_WORK_NAR(&dbs_info->work, do_dbs_timer); + queue_delayed_work_on(dbs_info->cpu, kondemand_wq, &dbs_info->work, + delay); } static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info) @@ -528,6 +531,7 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, j_dbs_info->prev_cpu_idle = get_cpu_idle_time(j); j_dbs_info->prev_cpu_wall = get_jiffies_64(); } + this_dbs_info->cpu = cpu; this_dbs_info->enable = 1; /* * Start the timerschedule work, when this governor @@ -548,7 +552,7 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, dbs_tuners_ins.sampling_rate = def_sampling_rate; } - dbs_timer_init(policy->cpu); + dbs_timer_init(this_dbs_info); mutex_unlock(&dbs_mutex); break; -- cgit v0.10.2 From 56463b78cdca8e9ff8cc1759bca0c0777a061d6b Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Mon, 5 Feb 2007 16:12:45 -0800 Subject: [CPUFREQ] ondemand governor use new cpufreq rwsem locking in work callback Eliminate flush_workqueue in cpufreq_governor(STOP) callpath. Using flush there has a deadlock potential as in http://uwsg.iu.edu/hypermail/linux/kernel/0611.3/1223.html Also, cleanup the locking issues with do_dbs_timer delayed_work callback. As it changes the CPU frequency using __cpufreq_target, it needs to have policy_rwsem in write mode, which also protects it from hot plug. Signed-off-by: Venkatesh Pallipadi Cc: Gautham R Shenoy Signed-off-by: Andrew Morton Signed-off-by: Dave Jones diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index a480834..bcf8bb8 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -437,8 +437,14 @@ static void do_dbs_timer(struct work_struct *work) delay -= jiffies % delay; - if (!dbs_info->enable) + if (lock_policy_rwsem_write(cpu) < 0) return; + + if (!dbs_info->enable) { + unlock_policy_rwsem_write(cpu); + return; + } + /* Common NORMAL_SAMPLE setup */ dbs_info->sample_type = DBS_NORMAL_SAMPLE; if (!dbs_tuners_ins.powersave_bias || @@ -455,6 +461,7 @@ static void do_dbs_timer(struct work_struct *work) CPUFREQ_RELATION_H); } queue_delayed_work_on(cpu, kondemand_wq, &dbs_info->work, delay); + unlock_policy_rwsem_write(cpu); } static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) @@ -463,6 +470,7 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate); delay -= jiffies % delay; + dbs_info->enable = 1; ondemand_powersave_bias_init(); dbs_info->sample_type = DBS_NORMAL_SAMPLE; INIT_DELAYED_WORK_NAR(&dbs_info->work, do_dbs_timer); @@ -474,7 +482,6 @@ static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info) { dbs_info->enable = 0; cancel_delayed_work(&dbs_info->work); - flush_workqueue(kondemand_wq); } static int cpufreq_governor_dbs(struct cpufreq_policy *policy, @@ -503,21 +510,9 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, mutex_lock(&dbs_mutex); dbs_enable++; - if (dbs_enable == 1) { - kondemand_wq = create_workqueue("kondemand"); - if (!kondemand_wq) { - printk(KERN_ERR - "Creation of kondemand failed\n"); - dbs_enable--; - mutex_unlock(&dbs_mutex); - return -ENOSPC; - } - } rc = sysfs_create_group(&policy->kobj, &dbs_attr_group); if (rc) { - if (dbs_enable == 1) - destroy_workqueue(kondemand_wq); dbs_enable--; mutex_unlock(&dbs_mutex); return rc; @@ -532,7 +527,6 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, j_dbs_info->prev_cpu_wall = get_jiffies_64(); } this_dbs_info->cpu = cpu; - this_dbs_info->enable = 1; /* * Start the timerschedule work, when this governor * is used for first time @@ -562,9 +556,6 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, dbs_timer_exit(this_dbs_info); sysfs_remove_group(&policy->kobj, &dbs_attr_group); dbs_enable--; - if (dbs_enable == 0) - destroy_workqueue(kondemand_wq); - mutex_unlock(&dbs_mutex); break; @@ -593,12 +584,18 @@ static struct cpufreq_governor cpufreq_gov_dbs = { static int __init cpufreq_gov_dbs_init(void) { + kondemand_wq = create_workqueue("kondemand"); + if (!kondemand_wq) { + printk(KERN_ERR "Creation of kondemand failed\n"); + return -EFAULT; + } return cpufreq_register_governor(&cpufreq_gov_dbs); } static void __exit cpufreq_gov_dbs_exit(void) { cpufreq_unregister_governor(&cpufreq_gov_dbs); + destroy_workqueue(kondemand_wq); } @@ -610,3 +607,4 @@ MODULE_LICENSE("GPL"); module_init(cpufreq_gov_dbs_init); module_exit(cpufreq_gov_dbs_exit); + -- cgit v0.10.2 From f0ec313a89a7377f440c815f82b0370bd67f62c6 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 5 Feb 2007 16:12:45 -0800 Subject: [CPUFREQ] CPU_FREQ_TABLE shouldn't be a def_tristate CPU_FREQ_TABLE enables helper code and gets select'ed when it's required. Building it as a module when it's not required doesn't seem to make much sense. Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Dave Jones diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig index 491779a..d155e81 100644 --- a/drivers/cpufreq/Kconfig +++ b/drivers/cpufreq/Kconfig @@ -16,7 +16,7 @@ config CPU_FREQ if CPU_FREQ config CPU_FREQ_TABLE - def_tristate m + tristate config CPU_FREQ_DEBUG bool "Enable CPUfreq debugging" -- cgit v0.10.2 From 9addf3b6388459f315adc728d27d34603a00d427 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=B3=20Bilski?= Date: Wed, 7 Feb 2007 22:53:29 +0100 Subject: [CPUFREQ] Longhaul - Simplier minmult Simple cleanup in code which is setting minmult. Signed-off-by: Rafal Bilski Signed-off-by: Dave Jones diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index 98fbe28..8f65ebe 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -358,22 +358,15 @@ static int __init longhaul_get_ranges(void) * C3 is booting at max anyway. */ maxmult = mult; /* Get min multiplier */ - switch (longhaul_version) { - case TYPE_LONGHAUL_V1: - case TYPE_LONGHAUL_V2: - minmult = 30; + switch (cpu_model) { + case CPU_NEHEMIAH: + minmult = 50; break; - - case TYPE_POWERSAVER: - /* Ezra-T */ - if (cpu_model == CPU_EZRA_T) - minmult = 30; - /* Nehemiah */ - else if (cpu_model == CPU_NEHEMIAH) - minmult = 50; - /* Nehemiah C */ - else if (cpu_model == CPU_NEHEMIAH_C) - minmult = 40; + case CPU_NEHEMIAH_C: + minmult = 40; + break; + default: + minmult = 30; break; } -- cgit v0.10.2 From c18a1483f478adbeb4cc7148db22c4a9c10aaee3 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sat, 10 Feb 2007 20:03:51 -0500 Subject: [CPUFREQ] Whitespace fixup Signed-off-by: Dave Jones diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index bcf8bb8..d60bcb9 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -470,7 +470,7 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate); delay -= jiffies % delay; - dbs_info->enable = 1; + dbs_info->enable = 1; ondemand_powersave_bias_init(); dbs_info->sample_type = DBS_NORMAL_SAMPLE; INIT_DELAYED_WORK_NAR(&dbs_info->work, do_dbs_timer); -- cgit v0.10.2 From e57501c15f48d6b7a8fe2b023be8f4779484482d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=B3=20Bilski?= Date: Thu, 8 Feb 2007 23:12:02 +0100 Subject: [CPUFREQ] Longhaul - Models of Nehemiah Borowed from VIA driver. Signed-off-by: Rafal Bilski Signed-off-by: Dave Jones diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index 8f65ebe..fc9afbb 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -636,15 +636,15 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) switch (c->x86_mask) { case 0 ... 1: cpu_model = CPU_NEHEMIAH; - cpuname = "C3 'Nehemiah A' [C5N]"; + cpuname = "C3 'Nehemiah A' [C5XLOE]"; break; case 2 ... 4: cpu_model = CPU_NEHEMIAH; - cpuname = "C3 'Nehemiah B' [C5N]"; + cpuname = "C3 'Nehemiah B' [C5XLOH]"; break; case 5 ... 15: cpu_model = CPU_NEHEMIAH_C; - cpuname = "C3 'Nehemiah C' [C5N]"; + cpuname = "C3 'Nehemiah C' [C5P]"; break; } break; -- cgit v0.10.2 From 348f31ed2bd18391fe5903aa0ad7bfcda6d8ca0b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=B3=20Bilski?= Date: Thu, 8 Feb 2007 18:56:04 +0100 Subject: [CPUFREQ] Longhaul - Separate frequency and voltage transition This change should make Longhaul more compatible with both ver. 2 and Powersaver processors. Voltage transitions will be done before or after frequency transition. That depends on direction of change. I don't know how to force conservative governor when voltage scaling is enabled, so there is only a warning for user. Minimal voltage is calculated in different way now because in this way more power is saved at lower multipliers. Signed-off-by: Rafal Bilski Signed-off-by: Dave Jones diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index fc9afbb..8f40cb4 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -65,7 +65,8 @@ static unsigned int fsb; static struct mV_pos *vrm_mV_table; static unsigned char *mV_vrm_table; struct f_msr { - unsigned char vrm; + u8 vrm; + u8 pos; }; static struct f_msr f_msr_table[32]; @@ -75,6 +76,7 @@ static int can_scale_voltage; static struct acpi_processor *pr = NULL; static struct acpi_processor_cx *cx = NULL; static u8 longhaul_flags; +static u8 longhaul_pos; /* Module parameters */ static int scale_voltage; @@ -165,26 +167,47 @@ static void do_longhaul1(unsigned int clock_ratio_index) static void do_powersaver(int cx_address, unsigned int clock_ratio_index) { union msr_longhaul longhaul; + u8 dest_pos; u32 t; + dest_pos = f_msr_table[clock_ratio_index].pos; + rdmsrl(MSR_VIA_LONGHAUL, longhaul.val); + /* Setup new frequency */ longhaul.bits.RevisionKey = longhaul.bits.RevisionID; longhaul.bits.SoftBusRatio = clock_ratio_index & 0xf; longhaul.bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4; - longhaul.bits.EnableSoftBusRatio = 1; - - if (can_scale_voltage) { + /* Setup new voltage */ + if (can_scale_voltage) longhaul.bits.SoftVID = f_msr_table[clock_ratio_index].vrm; + /* Sync to timer tick */ + safe_halt(); + /* Raise voltage if necessary */ + if (can_scale_voltage && longhaul_pos < dest_pos) { longhaul.bits.EnableSoftVID = 1; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + /* Change voltage */ + if (!cx_address) { + ACPI_FLUSH_CPU_CACHE(); + halt(); + } else { + ACPI_FLUSH_CPU_CACHE(); + /* Invoke C3 */ + inb(cx_address); + /* Dummy op - must do something useless after P_LVL3 + * read */ + t = inl(acpi_fadt.xpm_tmr_blk.address); + } + longhaul.bits.EnableSoftVID = 0; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + longhaul_pos = dest_pos; } - /* Sync to timer tick */ - safe_halt(); /* Change frequency on next halt or sleep */ + longhaul.bits.EnableSoftBusRatio = 1; wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); if (!cx_address) { ACPI_FLUSH_CPU_CACHE(); - /* Invoke C1 */ halt(); } else { ACPI_FLUSH_CPU_CACHE(); @@ -194,12 +217,29 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index) t = inl(acpi_fadt.xpm_tmr_blk.address); } /* Disable bus ratio bit */ - local_irq_disable(); - longhaul.bits.RevisionKey = longhaul.bits.RevisionID; longhaul.bits.EnableSoftBusRatio = 0; - longhaul.bits.EnableSoftBSEL = 0; - longhaul.bits.EnableSoftVID = 0; wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + + /* Reduce voltage if necessary */ + if (can_scale_voltage && longhaul_pos > dest_pos) { + longhaul.bits.EnableSoftVID = 1; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + /* Change voltage */ + if (!cx_address) { + ACPI_FLUSH_CPU_CACHE(); + halt(); + } else { + ACPI_FLUSH_CPU_CACHE(); + /* Invoke C3 */ + inb(cx_address); + /* Dummy op - must do something useless after P_LVL3 + * read */ + t = inl(acpi_fadt.xpm_tmr_blk.address); + } + longhaul.bits.EnableSoftVID = 0; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + longhaul_pos = dest_pos; + } } /** @@ -420,6 +460,7 @@ static void __init longhaul_setup_voltagescaling(void) union msr_longhaul longhaul; struct mV_pos minvid, maxvid; unsigned int j, speed, pos, kHz_step, numvscales; + int min_vid_speed; rdmsrl(MSR_VIA_LONGHAUL, longhaul.val); if (!(longhaul.bits.RevisionID & 1)) { @@ -439,8 +480,6 @@ static void __init longhaul_setup_voltagescaling(void) minvid = vrm_mV_table[longhaul.bits.MinimumVID]; maxvid = vrm_mV_table[longhaul.bits.MaximumVID]; - numvscales = maxvid.pos - minvid.pos + 1; - kHz_step = (highest_speed - lowest_speed) / numvscales; if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) { printk (KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. " @@ -456,20 +495,58 @@ static void __init longhaul_setup_voltagescaling(void) return; } - printk(KERN_INFO PFX "Max VID=%d.%03d Min VID=%d.%03d, %d possible voltage scales\n", + /* How many voltage steps */ + numvscales = maxvid.pos - minvid.pos + 1; + printk(KERN_INFO PFX + "Max VID=%d.%03d " + "Min VID=%d.%03d, " + "%d possible voltage scales\n", maxvid.mV/1000, maxvid.mV%1000, minvid.mV/1000, minvid.mV%1000, numvscales); - + + /* Calculate max frequency at min voltage */ + j = longhaul.bits.MinMHzBR; + if (longhaul.bits.MinMHzBR4) + j += 16; + min_vid_speed = eblcr_table[j]; + if (min_vid_speed == -1) + return; + switch (longhaul.bits.MinMHzFSB) { + case 0: + min_vid_speed *= 13333; + break; + case 1: + min_vid_speed *= 10000; + break; + case 3: + min_vid_speed *= 6666; + break; + default: + return; + break; + } + if (min_vid_speed >= highest_speed) + return; + /* Calculate kHz for one voltage step */ + kHz_step = (highest_speed - min_vid_speed) / numvscales; + j = 0; while (longhaul_table[j].frequency != CPUFREQ_TABLE_END) { speed = longhaul_table[j].frequency; - pos = (speed - lowest_speed) / kHz_step + minvid.pos; + if (speed > min_vid_speed) + pos = (speed - min_vid_speed) / kHz_step + minvid.pos; + else + pos = minvid.pos; f_msr_table[longhaul_table[j].index].vrm = mV_vrm_table[pos]; + f_msr_table[longhaul_table[j].index].pos = pos; j++; } + longhaul_pos = maxvid.pos; can_scale_voltage = 1; + printk(KERN_INFO PFX "Voltage scaling enabled. " + "Use of \"conservative\" governor is highly recommended.\n"); } -- cgit v0.10.2 From 82eb7c5059de64bd43f6b3cf3f128470f2b3fb83 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 8 Feb 2007 18:39:36 +0100 Subject: [WATCHDOG] timers cleanup - Use timer macros to set function and data members and to modify expiration time. - Use DEFINE_TIMER for single (platform dependent) watchdog timers and do not init them at run-time in these cases. - del_timer_sync is common in most cases -- we want to wait for timer function if it's still running. Signed-off-by: Jiri Slaby Cc: Steve Hill Cc: Heiko Ronsdorf Cc: Fernando Fuganti Cc: Gergely Madarasz Cc: Ken Hollis Cc: Paul Mundt Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton diff --git a/drivers/char/watchdog/alim7101_wdt.c b/drivers/char/watchdog/alim7101_wdt.c index 1dacec5..c195078 100644 --- a/drivers/char/watchdog/alim7101_wdt.c +++ b/drivers/char/watchdog/alim7101_wdt.c @@ -69,7 +69,7 @@ module_param(use_gpio, int, 0); MODULE_PARM_DESC(use_gpio, "Use the gpio watchdog. (required by old cobalt boards)"); static void wdt_timer_ping(unsigned long); -static struct timer_list timer; +static DEFINE_TIMER(timer, wdt_timer_ping, 0, 1); static unsigned long next_heartbeat; static unsigned long wdt_is_open; static char wdt_expect_close; @@ -108,8 +108,7 @@ static void wdt_timer_ping(unsigned long data) printk(KERN_WARNING PFX "Heartbeat lost! Will not ping the watchdog\n"); } /* Re-set the timer interval */ - timer.expires = jiffies + WDT_INTERVAL; - add_timer(&timer); + mod_timer(&timer, jiffies + WDT_INTERVAL); } /* @@ -147,9 +146,7 @@ static void wdt_startup(void) wdt_change(WDT_ENABLE); /* Start the timer */ - timer.expires = jiffies + WDT_INTERVAL; - add_timer(&timer); - + mod_timer(&timer, jiffies + WDT_INTERVAL); printk(KERN_INFO PFX "Watchdog timer is now enabled.\n"); } @@ -380,10 +377,6 @@ static int __init alim7101_wdt_init(void) timeout); } - init_timer(&timer); - timer.function = wdt_timer_ping; - timer.data = 1; - rc = misc_register(&wdt_miscdev); if (rc) { printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", diff --git a/drivers/char/watchdog/cpu5wdt.c b/drivers/char/watchdog/cpu5wdt.c index 00bdabb..bcd7e36 100644 --- a/drivers/char/watchdog/cpu5wdt.c +++ b/drivers/char/watchdog/cpu5wdt.c @@ -80,10 +80,8 @@ static void cpu5wdt_trigger(unsigned long unused) outb(1, port + CPU5WDT_TRIGGER_REG); /* requeue?? */ - if( cpu5wdt_device.queue && ticks ) { - cpu5wdt_device.timer.expires = jiffies + CPU5WDT_INTERVAL; - add_timer(&cpu5wdt_device.timer); - } + if (cpu5wdt_device.queue && ticks) + mod_timer(&cpu5wdt_device.timer, jiffies + CPU5WDT_INTERVAL); else { /* ticks doesn't matter anyway */ complete(&cpu5wdt_device.stop); @@ -109,8 +107,7 @@ static void cpu5wdt_start(void) outb(1, port + CPU5WDT_MODE_REG); outb(0, port + CPU5WDT_RESET_REG); outb(0, port + CPU5WDT_ENABLE_REG); - cpu5wdt_device.timer.expires = jiffies + CPU5WDT_INTERVAL; - add_timer(&cpu5wdt_device.timer); + mod_timer(&cpu5wdt_device.timer, jiffies + CPU5WDT_INTERVAL); } /* if process dies, counter is not decremented */ cpu5wdt_device.running++; @@ -245,9 +242,7 @@ static int __devinit cpu5wdt_init(void) clear_bit(0, &cpu5wdt_device.inuse); - init_timer(&cpu5wdt_device.timer); - cpu5wdt_device.timer.function = cpu5wdt_trigger; - cpu5wdt_device.timer.data = 0; + setup_timer(&cpu5wdt_device.timer, cpu5wdt_trigger, 0); cpu5wdt_device.default_ticks = ticks; diff --git a/drivers/char/watchdog/machzwd.c b/drivers/char/watchdog/machzwd.c index 391998d..4a328ba 100644 --- a/drivers/char/watchdog/machzwd.c +++ b/drivers/char/watchdog/machzwd.c @@ -118,12 +118,14 @@ static int action = 0; module_param(action, int, 0); MODULE_PARM_DESC(action, "after watchdog resets, generate: 0 = RESET(*) 1 = SMI 2 = NMI 3 = SCI"); +static void zf_ping(unsigned long data); + static int zf_action = GEN_RESET; static unsigned long zf_is_open; static char zf_expect_close; static spinlock_t zf_lock; static spinlock_t zf_port_lock; -static struct timer_list zf_timer; +static DEFINE_TIMER(zf_timer, zf_ping, 0, 0); static unsigned long next_heartbeat = 0; @@ -220,9 +222,7 @@ static void zf_timer_on(void) next_heartbeat = jiffies + ZF_USER_TIMEO; /* start the timer for internal ping */ - zf_timer.expires = jiffies + ZF_HW_TIMEO; - - add_timer(&zf_timer); + mod_timer(&zf_timer, jiffies + ZF_HW_TIMEO); /* start watchdog timer */ ctrl_reg = zf_get_control(); @@ -260,8 +260,7 @@ static void zf_ping(unsigned long data) zf_set_control(ctrl_reg); spin_unlock_irqrestore(&zf_port_lock, flags); - zf_timer.expires = jiffies + ZF_HW_TIMEO; - add_timer(&zf_timer); + mod_timer(&zf_timer, jiffies + ZF_HW_TIMEO); }else{ printk(KERN_CRIT PFX ": I will reset your machine\n"); } @@ -465,11 +464,6 @@ static int __init zf_init(void) zf_set_status(0); zf_set_control(0); - /* this is the timer that will do the hard work */ - init_timer(&zf_timer); - zf_timer.function = zf_ping; - zf_timer.data = 0; - return 0; no_reboot: diff --git a/drivers/char/watchdog/mixcomwd.c b/drivers/char/watchdog/mixcomwd.c index 7e3308a..f35e284 100644 --- a/drivers/char/watchdog/mixcomwd.c +++ b/drivers/char/watchdog/mixcomwd.c @@ -56,11 +56,13 @@ static int mixcomwd_ioports[] = { 0x180, 0x280, 0x380, 0x000 }; #define FLASHCOM_WATCHDOG_OFFSET 0x4 #define FLASHCOM_ID 0x18 +static void mixcomwd_timerfun(unsigned long d); + static unsigned long mixcomwd_opened; /* long req'd for setbit --RR */ static int watchdog_port; static int mixcomwd_timer_alive; -static DEFINE_TIMER(mixcomwd_timer, NULL, 0, 0); +static DEFINE_TIMER(mixcomwd_timer, mixcomwd_timerfun, 0, 0); static char expect_close; static int nowayout = WATCHDOG_NOWAYOUT; @@ -77,7 +79,7 @@ static void mixcomwd_timerfun(unsigned long d) { mixcomwd_ping(); - mod_timer(&mixcomwd_timer,jiffies+ 5*HZ); + mod_timer(&mixcomwd_timer, jiffies + 5 * HZ); } /* @@ -114,12 +116,8 @@ static int mixcomwd_release(struct inode *inode, struct file *file) printk(KERN_ERR "mixcomwd: release called while internal timer alive"); return -EBUSY; } - init_timer(&mixcomwd_timer); - mixcomwd_timer.expires=jiffies + 5 * HZ; - mixcomwd_timer.function=mixcomwd_timerfun; - mixcomwd_timer.data=0; mixcomwd_timer_alive=1; - add_timer(&mixcomwd_timer); + mod_timer(&mixcomwd_timer, jiffies + 5 * HZ); } else { printk(KERN_CRIT "mixcomwd: WDT device closed unexpectedly. WDT will not stop!\n"); } @@ -285,7 +283,7 @@ static void __exit mixcomwd_exit(void) if(mixcomwd_timer_alive) { printk(KERN_WARNING "mixcomwd: I quit now, hardware will" " probably reboot!\n"); - del_timer(&mixcomwd_timer); + del_timer_sync(&mixcomwd_timer); mixcomwd_timer_alive=0; } } diff --git a/drivers/char/watchdog/pcwd.c b/drivers/char/watchdog/pcwd.c index b056c3c..6e8b570 100644 --- a/drivers/char/watchdog/pcwd.c +++ b/drivers/char/watchdog/pcwd.c @@ -843,9 +843,7 @@ static int __devinit pcwatchdog_init(int base_addr) /* clear the "card caused reboot" flag */ pcwd_clear_status(); - init_timer(&pcwd_private.timer); - pcwd_private.timer.function = pcwd_timer_ping; - pcwd_private.timer.data = 0; + setup_timer(&pcwd_private.timer, pcwd_timer_ping, 0); /* Disable the board */ pcwd_stop(); diff --git a/drivers/char/watchdog/sbc60xxwdt.c b/drivers/char/watchdog/sbc60xxwdt.c index f5fb8cc..b628203 100644 --- a/drivers/char/watchdog/sbc60xxwdt.c +++ b/drivers/char/watchdog/sbc60xxwdt.c @@ -103,7 +103,7 @@ module_param(nowayout, int, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); static void wdt_timer_ping(unsigned long); -static struct timer_list timer; +static DEFINE_TIMER(timer, wdt_timer_ping, 0, 0); static unsigned long next_heartbeat; static unsigned long wdt_is_open; static char wdt_expect_close; @@ -122,8 +122,7 @@ static void wdt_timer_ping(unsigned long data) /* Ping the WDT by reading from wdt_start */ inb_p(wdt_start); /* Re-set the timer interval */ - timer.expires = jiffies + WDT_INTERVAL; - add_timer(&timer); + mod_timer(&timer, jiffies + WDT_INTERVAL); } else { printk(KERN_WARNING PFX "Heartbeat lost! Will not ping the watchdog\n"); } @@ -138,8 +137,7 @@ static void wdt_startup(void) next_heartbeat = jiffies + (timeout * HZ); /* Start the timer */ - timer.expires = jiffies + WDT_INTERVAL; - add_timer(&timer); + mod_timer(&timer, jiffies + WDT_INTERVAL); printk(KERN_INFO PFX "Watchdog timer is now enabled.\n"); } @@ -363,10 +361,6 @@ static int __init sbc60xxwdt_init(void) } } - init_timer(&timer); - timer.function = wdt_timer_ping; - timer.data = 0; - rc = misc_register(&wdt_miscdev); if (rc) { diff --git a/drivers/char/watchdog/sc520_wdt.c b/drivers/char/watchdog/sc520_wdt.c index ecc7305..2676a43 100644 --- a/drivers/char/watchdog/sc520_wdt.c +++ b/drivers/char/watchdog/sc520_wdt.c @@ -121,7 +121,7 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" _ static __u16 __iomem *wdtmrctl; static void wdt_timer_ping(unsigned long); -static struct timer_list timer; +static DEFINE_TIMER(timer, wdt_timer_ping, 0, 0); static unsigned long next_heartbeat; static unsigned long wdt_is_open; static char wdt_expect_close; @@ -145,8 +145,7 @@ static void wdt_timer_ping(unsigned long data) spin_unlock(&wdt_spinlock); /* Re-set the timer interval */ - timer.expires = jiffies + WDT_INTERVAL; - add_timer(&timer); + mod_timer(&timer, jiffies + WDT_INTERVAL); } else { printk(KERN_WARNING PFX "Heartbeat lost! Will not ping the watchdog\n"); } @@ -179,8 +178,7 @@ static int wdt_startup(void) next_heartbeat = jiffies + (timeout * HZ); /* Start the timer */ - timer.expires = jiffies + WDT_INTERVAL; - add_timer(&timer); + mod_timer(&timer, jiffies + WDT_INTERVAL); /* Start the watchdog */ wdt_config(WDT_ENB | WDT_WRST_ENB | WDT_EXP_SEL_04); @@ -389,10 +387,6 @@ static int __init sc520_wdt_init(void) spin_lock_init(&wdt_spinlock); - init_timer(&timer); - timer.function = wdt_timer_ping; - timer.data = 0; - /* Check that the timeout value is within it's range ; if not reset to the default */ if (wdt_set_heartbeat(timeout)) { wdt_set_heartbeat(WATCHDOG_TIMEOUT); diff --git a/drivers/char/watchdog/shwdt.c b/drivers/char/watchdog/shwdt.c index dc40362..cecbedd 100644 --- a/drivers/char/watchdog/shwdt.c +++ b/drivers/char/watchdog/shwdt.c @@ -65,10 +65,12 @@ static int clock_division_ratio = WTCSR_CKS_4096; #define next_ping_period(cks) msecs_to_jiffies(cks - 4) +static void sh_wdt_ping(unsigned long data); + static unsigned long shwdt_is_open; static struct watchdog_info sh_wdt_info; static char shwdt_expect_close; -static struct timer_list timer; +static DEFINE_TIMER(timer, sh_wdt_ping, 0, 0); static unsigned long next_heartbeat; #define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */ @@ -433,10 +435,6 @@ static int __init sh_wdt_init(void) "be 1<=x<=3600, using %d\n", heartbeat); } - init_timer(&timer); - timer.function = sh_wdt_ping; - timer.data = 0; - rc = register_reboot_notifier(&sh_wdt_notifier); if (unlikely(rc)) { printk(KERN_ERR PFX "Can't register reboot notifier (err=%d)\n", diff --git a/drivers/char/watchdog/w83877f_wdt.c b/drivers/char/watchdog/w83877f_wdt.c index 7dcd80a..3c88fe1 100644 --- a/drivers/char/watchdog/w83877f_wdt.c +++ b/drivers/char/watchdog/w83877f_wdt.c @@ -90,7 +90,7 @@ module_param(nowayout, int, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); static void wdt_timer_ping(unsigned long); -static struct timer_list timer; +static DEFINE_TIMER(timer, wdt_timer_ping, 0, 0); static unsigned long next_heartbeat; static unsigned long wdt_is_open; static char wdt_expect_close; @@ -114,8 +114,7 @@ static void wdt_timer_ping(unsigned long data) inb_p(WDT_PING); /* Re-set the timer interval */ - timer.expires = jiffies + WDT_INTERVAL; - add_timer(&timer); + mod_timer(&timer, jiffies + WDT_INTERVAL); spin_unlock(&wdt_spinlock); @@ -155,8 +154,7 @@ static void wdt_startup(void) next_heartbeat = jiffies + (timeout * HZ); /* Start the timer */ - timer.expires = jiffies + WDT_INTERVAL; - add_timer(&timer); + mod_timer(&timer, jiffies + WDT_INTERVAL); wdt_change(WDT_ENABLE); @@ -377,10 +375,6 @@ static int __init w83877f_wdt_init(void) goto err_out_region1; } - init_timer(&timer); - timer.function = wdt_timer_ping; - timer.data = 0; - rc = misc_register(&wdt_miscdev); if (rc) { -- cgit v0.10.2 From b038ced7b3705bf0ac9b30e118af0f56ab48b847 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Mon, 12 Feb 2007 16:16:18 -0800 Subject: RDMA/cxgb3: Add driver for Chelsio T3 RNIC Add an RDMA/iWARP driver for the Chelsio T3 1GbE and 10GbE adapters. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig index 9edface..66b36de 100644 --- a/drivers/infiniband/Kconfig +++ b/drivers/infiniband/Kconfig @@ -38,6 +38,7 @@ source "drivers/infiniband/hw/mthca/Kconfig" source "drivers/infiniband/hw/ipath/Kconfig" source "drivers/infiniband/hw/ehca/Kconfig" source "drivers/infiniband/hw/amso1100/Kconfig" +source "drivers/infiniband/hw/cxgb3/Kconfig" source "drivers/infiniband/ulp/ipoib/Kconfig" diff --git a/drivers/infiniband/Makefile b/drivers/infiniband/Makefile index 2b5d109..da2066c 100644 --- a/drivers/infiniband/Makefile +++ b/drivers/infiniband/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_INFINIBAND_MTHCA) += hw/mthca/ obj-$(CONFIG_INFINIBAND_IPATH) += hw/ipath/ obj-$(CONFIG_INFINIBAND_EHCA) += hw/ehca/ obj-$(CONFIG_INFINIBAND_AMSO1100) += hw/amso1100/ +obj-$(CONFIG_INFINIBAND_CXGB3) += hw/cxgb3/ obj-$(CONFIG_INFINIBAND_IPOIB) += ulp/ipoib/ obj-$(CONFIG_INFINIBAND_SRP) += ulp/srp/ obj-$(CONFIG_INFINIBAND_ISER) += ulp/iser/ diff --git a/drivers/infiniband/hw/cxgb3/Kconfig b/drivers/infiniband/hw/cxgb3/Kconfig new file mode 100644 index 0000000..77977f5 --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/Kconfig @@ -0,0 +1,27 @@ +config INFINIBAND_CXGB3 + tristate "Chelsio RDMA Driver" + depends on CHELSIO_T3 && INFINIBAND && INET + select GENERIC_ALLOCATOR + ---help--- + This is an iWARP/RDMA driver for the Chelsio T3 1GbE and + 10GbE adapters. + + For general information about Chelsio and our products, visit + our website at . + + For customer support, please visit our customer support page at + . + + Please send feedback to . + + To compile this driver as a module, choose M here: the module + will be called iw_cxgb3. + +config INFINIBAND_CXGB3_DEBUG + bool "Verbose debugging output" + depends on INFINIBAND_CXGB3 + default n + ---help--- + This option causes the Chelsio RDMA driver to produce copious + amounts of debug messages. Select this if you are developing + the driver or trying to diagnose a problem. diff --git a/drivers/infiniband/hw/cxgb3/Makefile b/drivers/infiniband/hw/cxgb3/Makefile new file mode 100644 index 0000000..0e110f3 --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/Makefile @@ -0,0 +1,12 @@ +EXTRA_CFLAGS += -I$(TOPDIR)/drivers/net/cxgb3 \ + -I$(TOPDIR)/drivers/infiniband/hw/cxgb3/core + +obj-$(CONFIG_INFINIBAND_CXGB3) += iw_cxgb3.o + +iw_cxgb3-y := iwch_cm.o iwch_ev.o iwch_cq.o iwch_qp.o iwch_mem.o \ + iwch_provider.o iwch.o cxio_hal.o cxio_resource.o + +ifdef CONFIG_INFINIBAND_CXGB3_DEBUG +EXTRA_CFLAGS += -DDEBUG +iw_cxgb3-y += cxio_dbg.o +endif diff --git a/drivers/infiniband/hw/cxgb3/cxio_dbg.c b/drivers/infiniband/hw/cxgb3/cxio_dbg.c new file mode 100644 index 0000000..5a7306f --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/cxio_dbg.c @@ -0,0 +1,207 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifdef DEBUG +#include +#include "common.h" +#include "cxgb3_ioctl.h" +#include "cxio_hal.h" +#include "cxio_wr.h" + +void cxio_dump_tpt(struct cxio_rdev *rdev, u32 stag) +{ + struct ch_mem_range *m; + u64 *data; + int rc; + int size = 32; + + m = kmalloc(sizeof(*m) + size, GFP_ATOMIC); + if (!m) { + PDBG("%s couldn't allocate memory.\n", __FUNCTION__); + return; + } + m->mem_id = MEM_PMRX; + m->addr = (stag>>8) * 32 + rdev->rnic_info.tpt_base; + m->len = size; + PDBG("%s TPT addr 0x%x len %d\n", __FUNCTION__, m->addr, m->len); + rc = rdev->t3cdev_p->ctl(rdev->t3cdev_p, RDMA_GET_MEM, m); + if (rc) { + PDBG("%s toectl returned error %d\n", __FUNCTION__, rc); + kfree(m); + return; + } + + data = (u64 *)m->buf; + while (size > 0) { + PDBG("TPT %08x: %016llx\n", m->addr, (unsigned long long) *data); + size -= 8; + data++; + m->addr += 8; + } + kfree(m); +} + +void cxio_dump_pbl(struct cxio_rdev *rdev, u32 pbl_addr, uint len, u8 shift) +{ + struct ch_mem_range *m; + u64 *data; + int rc; + int size, npages; + + shift += 12; + npages = (len + (1ULL << shift) - 1) >> shift; + size = npages * sizeof(u64); + + m = kmalloc(sizeof(*m) + size, GFP_ATOMIC); + if (!m) { + PDBG("%s couldn't allocate memory.\n", __FUNCTION__); + return; + } + m->mem_id = MEM_PMRX; + m->addr = pbl_addr; + m->len = size; + PDBG("%s PBL addr 0x%x len %d depth %d\n", + __FUNCTION__, m->addr, m->len, npages); + rc = rdev->t3cdev_p->ctl(rdev->t3cdev_p, RDMA_GET_MEM, m); + if (rc) { + PDBG("%s toectl returned error %d\n", __FUNCTION__, rc); + kfree(m); + return; + } + + data = (u64 *)m->buf; + while (size > 0) { + PDBG("PBL %08x: %016llx\n", m->addr, (unsigned long long) *data); + size -= 8; + data++; + m->addr += 8; + } + kfree(m); +} + +void cxio_dump_wqe(union t3_wr *wqe) +{ + __be64 *data = (__be64 *)wqe; + uint size = (uint)(be64_to_cpu(*data) & 0xff); + + if (size == 0) + size = 8; + while (size > 0) { + PDBG("WQE %p: %016llx\n", data, + (unsigned long long) be64_to_cpu(*data)); + size--; + data++; + } +} + +void cxio_dump_wce(struct t3_cqe *wce) +{ + __be64 *data = (__be64 *)wce; + int size = sizeof(*wce); + + while (size > 0) { + PDBG("WCE %p: %016llx\n", data, + (unsigned long long) be64_to_cpu(*data)); + size -= 8; + data++; + } +} + +void cxio_dump_rqt(struct cxio_rdev *rdev, u32 hwtid, int nents) +{ + struct ch_mem_range *m; + int size = nents * 64; + u64 *data; + int rc; + + m = kmalloc(sizeof(*m) + size, GFP_ATOMIC); + if (!m) { + PDBG("%s couldn't allocate memory.\n", __FUNCTION__); + return; + } + m->mem_id = MEM_PMRX; + m->addr = ((hwtid)<<10) + rdev->rnic_info.rqt_base; + m->len = size; + PDBG("%s RQT addr 0x%x len %d\n", __FUNCTION__, m->addr, m->len); + rc = rdev->t3cdev_p->ctl(rdev->t3cdev_p, RDMA_GET_MEM, m); + if (rc) { + PDBG("%s toectl returned error %d\n", __FUNCTION__, rc); + kfree(m); + return; + } + + data = (u64 *)m->buf; + while (size > 0) { + PDBG("RQT %08x: %016llx\n", m->addr, (unsigned long long) *data); + size -= 8; + data++; + m->addr += 8; + } + kfree(m); +} + +void cxio_dump_tcb(struct cxio_rdev *rdev, u32 hwtid) +{ + struct ch_mem_range *m; + int size = TCB_SIZE; + u32 *data; + int rc; + + m = kmalloc(sizeof(*m) + size, GFP_ATOMIC); + if (!m) { + PDBG("%s couldn't allocate memory.\n", __FUNCTION__); + return; + } + m->mem_id = MEM_CM; + m->addr = hwtid * size; + m->len = size; + PDBG("%s TCB %d len %d\n", __FUNCTION__, m->addr, m->len); + rc = rdev->t3cdev_p->ctl(rdev->t3cdev_p, RDMA_GET_MEM, m); + if (rc) { + PDBG("%s toectl returned error %d\n", __FUNCTION__, rc); + kfree(m); + return; + } + + data = (u32 *)m->buf; + while (size > 0) { + printk("%2u: %08x %08x %08x %08x %08x %08x %08x %08x\n", + m->addr, + *(data+2), *(data+3), *(data),*(data+1), + *(data+6), *(data+7), *(data+4), *(data+5)); + size -= 32; + data += 8; + m->addr += 32; + } + kfree(m); +} +#endif diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.c b/drivers/infiniband/hw/cxgb3/cxio_hal.c new file mode 100644 index 0000000..82fa720 --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/cxio_hal.c @@ -0,0 +1,1280 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include + +#include +#include +#include +#include +#include + +#include "cxio_resource.h" +#include "cxio_hal.h" +#include "cxgb3_offload.h" +#include "sge_defs.h" + +static LIST_HEAD(rdev_list); +static cxio_hal_ev_callback_func_t cxio_ev_cb = NULL; + +static inline struct cxio_rdev *cxio_hal_find_rdev_by_name(char *dev_name) +{ + struct cxio_rdev *rdev; + + list_for_each_entry(rdev, &rdev_list, entry) + if (!strcmp(rdev->dev_name, dev_name)) + return rdev; + return NULL; +} + +static inline struct cxio_rdev *cxio_hal_find_rdev_by_t3cdev(struct t3cdev + *tdev) +{ + struct cxio_rdev *rdev; + + list_for_each_entry(rdev, &rdev_list, entry) + if (rdev->t3cdev_p == tdev) + return rdev; + return NULL; +} + +int cxio_hal_cq_op(struct cxio_rdev *rdev_p, struct t3_cq *cq, + enum t3_cq_opcode op, u32 credit) +{ + int ret; + struct t3_cqe *cqe; + u32 rptr; + + struct rdma_cq_op setup; + setup.id = cq->cqid; + setup.credits = (op == CQ_CREDIT_UPDATE) ? credit : 0; + setup.op = op; + ret = rdev_p->t3cdev_p->ctl(rdev_p->t3cdev_p, RDMA_CQ_OP, &setup); + + if ((ret < 0) || (op == CQ_CREDIT_UPDATE)) + return ret; + + /* + * If the rearm returned an index other than our current index, + * then there might be CQE's in flight (being DMA'd). We must wait + * here for them to complete or the consumer can miss a notification. + */ + if (Q_PTR2IDX((cq->rptr), cq->size_log2) != ret) { + int i=0; + + rptr = cq->rptr; + + /* + * Keep the generation correct by bumping rptr until it + * matches the index returned by the rearm - 1. + */ + while (Q_PTR2IDX((rptr+1), cq->size_log2) != ret) + rptr++; + + /* + * Now rptr is the index for the (last) cqe that was + * in-flight at the time the HW rearmed the CQ. We + * spin until that CQE is valid. + */ + cqe = cq->queue + Q_PTR2IDX(rptr, cq->size_log2); + while (!CQ_VLD_ENTRY(rptr, cq->size_log2, cqe)) { + udelay(1); + if (i++ > 1000000) { + BUG_ON(1); + printk(KERN_ERR "%s: stalled rnic\n", + rdev_p->dev_name); + return -EIO; + } + } + } + return 0; +} + +static inline int cxio_hal_clear_cq_ctx(struct cxio_rdev *rdev_p, u32 cqid) +{ + struct rdma_cq_setup setup; + setup.id = cqid; + setup.base_addr = 0; /* NULL address */ + setup.size = 0; /* disaable the CQ */ + setup.credits = 0; + setup.credit_thres = 0; + setup.ovfl_mode = 0; + return (rdev_p->t3cdev_p->ctl(rdev_p->t3cdev_p, RDMA_CQ_SETUP, &setup)); +} + +int cxio_hal_clear_qp_ctx(struct cxio_rdev *rdev_p, u32 qpid) +{ + u64 sge_cmd; + struct t3_modify_qp_wr *wqe; + struct sk_buff *skb = alloc_skb(sizeof(*wqe), GFP_KERNEL); + if (!skb) { + PDBG("%s alloc_skb failed\n", __FUNCTION__); + return -ENOMEM; + } + wqe = (struct t3_modify_qp_wr *) skb_put(skb, sizeof(*wqe)); + memset(wqe, 0, sizeof(*wqe)); + build_fw_riwrh((struct fw_riwrh *) wqe, T3_WR_QP_MOD, 3, 1, qpid, 7); + wqe->flags = cpu_to_be32(MODQP_WRITE_EC); + sge_cmd = qpid << 8 | 3; + wqe->sge_cmd = cpu_to_be64(sge_cmd); + skb->priority = CPL_PRIORITY_CONTROL; + return (cxgb3_ofld_send(rdev_p->t3cdev_p, skb)); +} + +int cxio_create_cq(struct cxio_rdev *rdev_p, struct t3_cq *cq) +{ + struct rdma_cq_setup setup; + int size = (1UL << (cq->size_log2)) * sizeof(struct t3_cqe); + + cq->cqid = cxio_hal_get_cqid(rdev_p->rscp); + if (!cq->cqid) + return -ENOMEM; + cq->sw_queue = kzalloc(size, GFP_KERNEL); + if (!cq->sw_queue) + return -ENOMEM; + cq->queue = dma_alloc_coherent(&(rdev_p->rnic_info.pdev->dev), + (1UL << (cq->size_log2)) * + sizeof(struct t3_cqe), + &(cq->dma_addr), GFP_KERNEL); + if (!cq->queue) { + kfree(cq->sw_queue); + return -ENOMEM; + } + pci_unmap_addr_set(cq, mapping, cq->dma_addr); + memset(cq->queue, 0, size); + setup.id = cq->cqid; + setup.base_addr = (u64) (cq->dma_addr); + setup.size = 1UL << cq->size_log2; + setup.credits = 65535; + setup.credit_thres = 1; + if (rdev_p->t3cdev_p->type == T3B) + setup.ovfl_mode = 0; + else + setup.ovfl_mode = 1; + return (rdev_p->t3cdev_p->ctl(rdev_p->t3cdev_p, RDMA_CQ_SETUP, &setup)); +} + +int cxio_resize_cq(struct cxio_rdev *rdev_p, struct t3_cq *cq) +{ + struct rdma_cq_setup setup; + setup.id = cq->cqid; + setup.base_addr = (u64) (cq->dma_addr); + setup.size = 1UL << cq->size_log2; + setup.credits = setup.size; + setup.credit_thres = setup.size; /* TBD: overflow recovery */ + setup.ovfl_mode = 1; + return (rdev_p->t3cdev_p->ctl(rdev_p->t3cdev_p, RDMA_CQ_SETUP, &setup)); +} + +static u32 get_qpid(struct cxio_rdev *rdev_p, struct cxio_ucontext *uctx) +{ + struct cxio_qpid_list *entry; + u32 qpid; + int i; + + mutex_lock(&uctx->lock); + if (!list_empty(&uctx->qpids)) { + entry = list_entry(uctx->qpids.next, struct cxio_qpid_list, + entry); + list_del(&entry->entry); + qpid = entry->qpid; + kfree(entry); + } else { + qpid = cxio_hal_get_qpid(rdev_p->rscp); + if (!qpid) + goto out; + for (i = qpid+1; i & rdev_p->qpmask; i++) { + entry = kmalloc(sizeof *entry, GFP_KERNEL); + if (!entry) + break; + entry->qpid = i; + list_add_tail(&entry->entry, &uctx->qpids); + } + } +out: + mutex_unlock(&uctx->lock); + PDBG("%s qpid 0x%x\n", __FUNCTION__, qpid); + return qpid; +} + +static void put_qpid(struct cxio_rdev *rdev_p, u32 qpid, + struct cxio_ucontext *uctx) +{ + struct cxio_qpid_list *entry; + + entry = kmalloc(sizeof *entry, GFP_KERNEL); + if (!entry) + return; + PDBG("%s qpid 0x%x\n", __FUNCTION__, qpid); + entry->qpid = qpid; + mutex_lock(&uctx->lock); + list_add_tail(&entry->entry, &uctx->qpids); + mutex_unlock(&uctx->lock); +} + +void cxio_release_ucontext(struct cxio_rdev *rdev_p, struct cxio_ucontext *uctx) +{ + struct list_head *pos, *nxt; + struct cxio_qpid_list *entry; + + mutex_lock(&uctx->lock); + list_for_each_safe(pos, nxt, &uctx->qpids) { + entry = list_entry(pos, struct cxio_qpid_list, entry); + list_del_init(&entry->entry); + if (!(entry->qpid & rdev_p->qpmask)) + cxio_hal_put_qpid(rdev_p->rscp, entry->qpid); + kfree(entry); + } + mutex_unlock(&uctx->lock); +} + +void cxio_init_ucontext(struct cxio_rdev *rdev_p, struct cxio_ucontext *uctx) +{ + INIT_LIST_HEAD(&uctx->qpids); + mutex_init(&uctx->lock); +} + +int cxio_create_qp(struct cxio_rdev *rdev_p, u32 kernel_domain, + struct t3_wq *wq, struct cxio_ucontext *uctx) +{ + int depth = 1UL << wq->size_log2; + int rqsize = 1UL << wq->rq_size_log2; + + wq->qpid = get_qpid(rdev_p, uctx); + if (!wq->qpid) + return -ENOMEM; + + wq->rq = kzalloc(depth * sizeof(u64), GFP_KERNEL); + if (!wq->rq) + goto err1; + + wq->rq_addr = cxio_hal_rqtpool_alloc(rdev_p, rqsize); + if (!wq->rq_addr) + goto err2; + + wq->sq = kzalloc(depth * sizeof(struct t3_swsq), GFP_KERNEL); + if (!wq->sq) + goto err3; + + wq->queue = dma_alloc_coherent(&(rdev_p->rnic_info.pdev->dev), + depth * sizeof(union t3_wr), + &(wq->dma_addr), GFP_KERNEL); + if (!wq->queue) + goto err4; + + memset(wq->queue, 0, depth * sizeof(union t3_wr)); + pci_unmap_addr_set(wq, mapping, wq->dma_addr); + wq->doorbell = (void __iomem *)rdev_p->rnic_info.kdb_addr; + if (!kernel_domain) + wq->udb = (u64)rdev_p->rnic_info.udbell_physbase + + (wq->qpid << rdev_p->qpshift); + PDBG("%s qpid 0x%x doorbell 0x%p udb 0x%llx\n", __FUNCTION__, + wq->qpid, wq->doorbell, (unsigned long long) wq->udb); + return 0; +err4: + kfree(wq->sq); +err3: + cxio_hal_rqtpool_free(rdev_p, wq->rq_addr, rqsize); +err2: + kfree(wq->rq); +err1: + put_qpid(rdev_p, wq->qpid, uctx); + return -ENOMEM; +} + +int cxio_destroy_cq(struct cxio_rdev *rdev_p, struct t3_cq *cq) +{ + int err; + err = cxio_hal_clear_cq_ctx(rdev_p, cq->cqid); + kfree(cq->sw_queue); + dma_free_coherent(&(rdev_p->rnic_info.pdev->dev), + (1UL << (cq->size_log2)) + * sizeof(struct t3_cqe), cq->queue, + pci_unmap_addr(cq, mapping)); + cxio_hal_put_cqid(rdev_p->rscp, cq->cqid); + return err; +} + +int cxio_destroy_qp(struct cxio_rdev *rdev_p, struct t3_wq *wq, + struct cxio_ucontext *uctx) +{ + dma_free_coherent(&(rdev_p->rnic_info.pdev->dev), + (1UL << (wq->size_log2)) + * sizeof(union t3_wr), wq->queue, + pci_unmap_addr(wq, mapping)); + kfree(wq->sq); + cxio_hal_rqtpool_free(rdev_p, wq->rq_addr, (1UL << wq->rq_size_log2)); + kfree(wq->rq); + put_qpid(rdev_p, wq->qpid, uctx); + return 0; +} + +static void insert_recv_cqe(struct t3_wq *wq, struct t3_cq *cq) +{ + struct t3_cqe cqe; + + PDBG("%s wq %p cq %p sw_rptr 0x%x sw_wptr 0x%x\n", __FUNCTION__, + wq, cq, cq->sw_rptr, cq->sw_wptr); + memset(&cqe, 0, sizeof(cqe)); + cqe.header = cpu_to_be32(V_CQE_STATUS(TPT_ERR_SWFLUSH) | + V_CQE_OPCODE(T3_SEND) | + V_CQE_TYPE(0) | + V_CQE_SWCQE(1) | + V_CQE_QPID(wq->qpid) | + V_CQE_GENBIT(Q_GENBIT(cq->sw_wptr, + cq->size_log2))); + *(cq->sw_queue + Q_PTR2IDX(cq->sw_wptr, cq->size_log2)) = cqe; + cq->sw_wptr++; +} + +void cxio_flush_rq(struct t3_wq *wq, struct t3_cq *cq, int count) +{ + u32 ptr; + + PDBG("%s wq %p cq %p\n", __FUNCTION__, wq, cq); + + /* flush RQ */ + PDBG("%s rq_rptr %u rq_wptr %u skip count %u\n", __FUNCTION__, + wq->rq_rptr, wq->rq_wptr, count); + ptr = wq->rq_rptr + count; + while (ptr++ != wq->rq_wptr) + insert_recv_cqe(wq, cq); +} + +static void insert_sq_cqe(struct t3_wq *wq, struct t3_cq *cq, + struct t3_swsq *sqp) +{ + struct t3_cqe cqe; + + PDBG("%s wq %p cq %p sw_rptr 0x%x sw_wptr 0x%x\n", __FUNCTION__, + wq, cq, cq->sw_rptr, cq->sw_wptr); + memset(&cqe, 0, sizeof(cqe)); + cqe.header = cpu_to_be32(V_CQE_STATUS(TPT_ERR_SWFLUSH) | + V_CQE_OPCODE(sqp->opcode) | + V_CQE_TYPE(1) | + V_CQE_SWCQE(1) | + V_CQE_QPID(wq->qpid) | + V_CQE_GENBIT(Q_GENBIT(cq->sw_wptr, + cq->size_log2))); + cqe.u.scqe.wrid_hi = sqp->sq_wptr; + + *(cq->sw_queue + Q_PTR2IDX(cq->sw_wptr, cq->size_log2)) = cqe; + cq->sw_wptr++; +} + +void cxio_flush_sq(struct t3_wq *wq, struct t3_cq *cq, int count) +{ + __u32 ptr; + struct t3_swsq *sqp = wq->sq + Q_PTR2IDX(wq->sq_rptr, wq->sq_size_log2); + + ptr = wq->sq_rptr + count; + sqp += count; + while (ptr != wq->sq_wptr) { + insert_sq_cqe(wq, cq, sqp); + sqp++; + ptr++; + } +} + +/* + * Move all CQEs from the HWCQ into the SWCQ. + */ +void cxio_flush_hw_cq(struct t3_cq *cq) +{ + struct t3_cqe *cqe, *swcqe; + + PDBG("%s cq %p cqid 0x%x\n", __FUNCTION__, cq, cq->cqid); + cqe = cxio_next_hw_cqe(cq); + while (cqe) { + PDBG("%s flushing hwcq rptr 0x%x to swcq wptr 0x%x\n", + __FUNCTION__, cq->rptr, cq->sw_wptr); + swcqe = cq->sw_queue + Q_PTR2IDX(cq->sw_wptr, cq->size_log2); + *swcqe = *cqe; + swcqe->header |= cpu_to_be32(V_CQE_SWCQE(1)); + cq->sw_wptr++; + cq->rptr++; + cqe = cxio_next_hw_cqe(cq); + } +} + +static inline int cqe_completes_wr(struct t3_cqe *cqe, struct t3_wq *wq) +{ + if (CQE_OPCODE(*cqe) == T3_TERMINATE) + return 0; + + if ((CQE_OPCODE(*cqe) == T3_RDMA_WRITE) && RQ_TYPE(*cqe)) + return 0; + + if ((CQE_OPCODE(*cqe) == T3_READ_RESP) && SQ_TYPE(*cqe)) + return 0; + + if ((CQE_OPCODE(*cqe) == T3_SEND) && RQ_TYPE(*cqe) && + Q_EMPTY(wq->rq_rptr, wq->rq_wptr)) + return 0; + + return 1; +} + +void cxio_count_scqes(struct t3_cq *cq, struct t3_wq *wq, int *count) +{ + struct t3_cqe *cqe; + u32 ptr; + + *count = 0; + ptr = cq->sw_rptr; + while (!Q_EMPTY(ptr, cq->sw_wptr)) { + cqe = cq->sw_queue + (Q_PTR2IDX(ptr, cq->size_log2)); + if ((SQ_TYPE(*cqe) || (CQE_OPCODE(*cqe) == T3_READ_RESP)) && + (CQE_QPID(*cqe) == wq->qpid)) + (*count)++; + ptr++; + } + PDBG("%s cq %p count %d\n", __FUNCTION__, cq, *count); +} + +void cxio_count_rcqes(struct t3_cq *cq, struct t3_wq *wq, int *count) +{ + struct t3_cqe *cqe; + u32 ptr; + + *count = 0; + PDBG("%s count zero %d\n", __FUNCTION__, *count); + ptr = cq->sw_rptr; + while (!Q_EMPTY(ptr, cq->sw_wptr)) { + cqe = cq->sw_queue + (Q_PTR2IDX(ptr, cq->size_log2)); + if (RQ_TYPE(*cqe) && (CQE_OPCODE(*cqe) != T3_READ_RESP) && + (CQE_QPID(*cqe) == wq->qpid) && cqe_completes_wr(cqe, wq)) + (*count)++; + ptr++; + } + PDBG("%s cq %p count %d\n", __FUNCTION__, cq, *count); +} + +static int cxio_hal_init_ctrl_cq(struct cxio_rdev *rdev_p) +{ + struct rdma_cq_setup setup; + setup.id = 0; + setup.base_addr = 0; /* NULL address */ + setup.size = 1; /* enable the CQ */ + setup.credits = 0; + + /* force SGE to redirect to RspQ and interrupt */ + setup.credit_thres = 0; + setup.ovfl_mode = 1; + return (rdev_p->t3cdev_p->ctl(rdev_p->t3cdev_p, RDMA_CQ_SETUP, &setup)); +} + +static int cxio_hal_init_ctrl_qp(struct cxio_rdev *rdev_p) +{ + int err; + u64 sge_cmd, ctx0, ctx1; + u64 base_addr; + struct t3_modify_qp_wr *wqe; + struct sk_buff *skb = alloc_skb(sizeof(*wqe), GFP_KERNEL); + + + if (!skb) { + PDBG("%s alloc_skb failed\n", __FUNCTION__); + return -ENOMEM; + } + err = cxio_hal_init_ctrl_cq(rdev_p); + if (err) { + PDBG("%s err %d initializing ctrl_cq\n", __FUNCTION__, err); + return err; + } + rdev_p->ctrl_qp.workq = dma_alloc_coherent( + &(rdev_p->rnic_info.pdev->dev), + (1 << T3_CTRL_QP_SIZE_LOG2) * + sizeof(union t3_wr), + &(rdev_p->ctrl_qp.dma_addr), + GFP_KERNEL); + if (!rdev_p->ctrl_qp.workq) { + PDBG("%s dma_alloc_coherent failed\n", __FUNCTION__); + return -ENOMEM; + } + pci_unmap_addr_set(&rdev_p->ctrl_qp, mapping, + rdev_p->ctrl_qp.dma_addr); + rdev_p->ctrl_qp.doorbell = (void __iomem *)rdev_p->rnic_info.kdb_addr; + memset(rdev_p->ctrl_qp.workq, 0, + (1 << T3_CTRL_QP_SIZE_LOG2) * sizeof(union t3_wr)); + + mutex_init(&rdev_p->ctrl_qp.lock); + init_waitqueue_head(&rdev_p->ctrl_qp.waitq); + + /* update HW Ctrl QP context */ + base_addr = rdev_p->ctrl_qp.dma_addr; + base_addr >>= 12; + ctx0 = (V_EC_SIZE((1 << T3_CTRL_QP_SIZE_LOG2)) | + V_EC_BASE_LO((u32) base_addr & 0xffff)); + ctx0 <<= 32; + ctx0 |= V_EC_CREDITS(FW_WR_NUM); + base_addr >>= 16; + ctx1 = (u32) base_addr; + base_addr >>= 32; + ctx1 |= ((u64) (V_EC_BASE_HI((u32) base_addr & 0xf) | V_EC_RESPQ(0) | + V_EC_TYPE(0) | V_EC_GEN(1) | + V_EC_UP_TOKEN(T3_CTL_QP_TID) | F_EC_VALID)) << 32; + wqe = (struct t3_modify_qp_wr *) skb_put(skb, sizeof(*wqe)); + memset(wqe, 0, sizeof(*wqe)); + build_fw_riwrh((struct fw_riwrh *) wqe, T3_WR_QP_MOD, 0, 1, + T3_CTL_QP_TID, 7); + wqe->flags = cpu_to_be32(MODQP_WRITE_EC); + sge_cmd = (3ULL << 56) | FW_RI_SGEEC_START << 8 | 3; + wqe->sge_cmd = cpu_to_be64(sge_cmd); + wqe->ctx1 = cpu_to_be64(ctx1); + wqe->ctx0 = cpu_to_be64(ctx0); + PDBG("CtrlQP dma_addr 0x%llx workq %p size %d\n", + (unsigned long long) rdev_p->ctrl_qp.dma_addr, + rdev_p->ctrl_qp.workq, 1 << T3_CTRL_QP_SIZE_LOG2); + skb->priority = CPL_PRIORITY_CONTROL; + return (cxgb3_ofld_send(rdev_p->t3cdev_p, skb)); +} + +static int cxio_hal_destroy_ctrl_qp(struct cxio_rdev *rdev_p) +{ + dma_free_coherent(&(rdev_p->rnic_info.pdev->dev), + (1UL << T3_CTRL_QP_SIZE_LOG2) + * sizeof(union t3_wr), rdev_p->ctrl_qp.workq, + pci_unmap_addr(&rdev_p->ctrl_qp, mapping)); + return cxio_hal_clear_qp_ctx(rdev_p, T3_CTRL_QP_ID); +} + +/* write len bytes of data into addr (32B aligned address) + * If data is NULL, clear len byte of memory to zero. + * caller aquires the ctrl_qp lock before the call + */ +static int cxio_hal_ctrl_qp_write_mem(struct cxio_rdev *rdev_p, u32 addr, + u32 len, void *data, int completion) +{ + u32 i, nr_wqe, copy_len; + u8 *copy_data; + u8 wr_len, utx_len; /* lenght in 8 byte flit */ + enum t3_wr_flags flag; + __be64 *wqe; + u64 utx_cmd; + addr &= 0x7FFFFFF; + nr_wqe = len % 96 ? len / 96 + 1 : len / 96; /* 96B max per WQE */ + PDBG("%s wptr 0x%x rptr 0x%x len %d, nr_wqe %d data %p addr 0x%0x\n", + __FUNCTION__, rdev_p->ctrl_qp.wptr, rdev_p->ctrl_qp.rptr, len, + nr_wqe, data, addr); + utx_len = 3; /* in 32B unit */ + for (i = 0; i < nr_wqe; i++) { + if (Q_FULL(rdev_p->ctrl_qp.rptr, rdev_p->ctrl_qp.wptr, + T3_CTRL_QP_SIZE_LOG2)) { + PDBG("%s ctrl_qp full wtpr 0x%0x rptr 0x%0x, " + "wait for more space i %d\n", __FUNCTION__, + rdev_p->ctrl_qp.wptr, rdev_p->ctrl_qp.rptr, i); + if (wait_event_interruptible(rdev_p->ctrl_qp.waitq, + !Q_FULL(rdev_p->ctrl_qp.rptr, + rdev_p->ctrl_qp.wptr, + T3_CTRL_QP_SIZE_LOG2))) { + PDBG("%s ctrl_qp workq interrupted\n", + __FUNCTION__); + return -ERESTARTSYS; + } + PDBG("%s ctrl_qp wakeup, continue posting work request " + "i %d\n", __FUNCTION__, i); + } + wqe = (__be64 *)(rdev_p->ctrl_qp.workq + (rdev_p->ctrl_qp.wptr % + (1 << T3_CTRL_QP_SIZE_LOG2))); + flag = 0; + if (i == (nr_wqe - 1)) { + /* last WQE */ + flag = completion ? T3_COMPLETION_FLAG : 0; + if (len % 32) + utx_len = len / 32 + 1; + else + utx_len = len / 32; + } + + /* + * Force a CQE to return the credit to the workq in case + * we posted more than half the max QP size of WRs + */ + if ((i != 0) && + (i % (((1 << T3_CTRL_QP_SIZE_LOG2)) >> 1) == 0)) { + flag = T3_COMPLETION_FLAG; + PDBG("%s force completion at i %d\n", __FUNCTION__, i); + } + + /* build the utx mem command */ + wqe += (sizeof(struct t3_bypass_wr) >> 3); + utx_cmd = (T3_UTX_MEM_WRITE << 28) | (addr + i * 3); + utx_cmd <<= 32; + utx_cmd |= (utx_len << 28) | ((utx_len << 2) + 1); + *wqe = cpu_to_be64(utx_cmd); + wqe++; + copy_data = (u8 *) data + i * 96; + copy_len = len > 96 ? 96 : len; + + /* clear memory content if data is NULL */ + if (data) + memcpy(wqe, copy_data, copy_len); + else + memset(wqe, 0, copy_len); + if (copy_len % 32) + memset(((u8 *) wqe) + copy_len, 0, + 32 - (copy_len % 32)); + wr_len = ((sizeof(struct t3_bypass_wr)) >> 3) + 1 + + (utx_len << 2); + wqe = (__be64 *)(rdev_p->ctrl_qp.workq + (rdev_p->ctrl_qp.wptr % + (1 << T3_CTRL_QP_SIZE_LOG2))); + + /* wptr in the WRID[31:0] */ + ((union t3_wrid *)(wqe+1))->id0.low = rdev_p->ctrl_qp.wptr; + + /* + * This must be the last write with a memory barrier + * for the genbit + */ + build_fw_riwrh((struct fw_riwrh *) wqe, T3_WR_BP, flag, + Q_GENBIT(rdev_p->ctrl_qp.wptr, + T3_CTRL_QP_SIZE_LOG2), T3_CTRL_QP_ID, + wr_len); + if (flag == T3_COMPLETION_FLAG) + ring_doorbell(rdev_p->ctrl_qp.doorbell, T3_CTRL_QP_ID); + len -= 96; + rdev_p->ctrl_qp.wptr++; + } + return 0; +} + +/* IN: stag key, pdid, perm, zbva, to, len, page_size, pbl, and pbl_size + * OUT: stag index, actual pbl_size, pbl_addr allocated. + * TBD: shared memory region support + */ +static int __cxio_tpt_op(struct cxio_rdev *rdev_p, u32 reset_tpt_entry, + u32 *stag, u8 stag_state, u32 pdid, + enum tpt_mem_type type, enum tpt_mem_perm perm, + u32 zbva, u64 to, u32 len, u8 page_size, __be64 *pbl, + u32 *pbl_size, u32 *pbl_addr) +{ + int err; + struct tpt_entry tpt; + u32 stag_idx; + u32 wptr; + int rereg = (*stag != T3_STAG_UNSET); + + stag_state = stag_state > 0; + stag_idx = (*stag) >> 8; + + if ((!reset_tpt_entry) && !(*stag != T3_STAG_UNSET)) { + stag_idx = cxio_hal_get_stag(rdev_p->rscp); + if (!stag_idx) + return -ENOMEM; + *stag = (stag_idx << 8) | ((*stag) & 0xFF); + } + PDBG("%s stag_state 0x%0x type 0x%0x pdid 0x%0x, stag_idx 0x%x\n", + __FUNCTION__, stag_state, type, pdid, stag_idx); + + if (reset_tpt_entry) + cxio_hal_pblpool_free(rdev_p, *pbl_addr, *pbl_size << 3); + else if (!rereg) { + *pbl_addr = cxio_hal_pblpool_alloc(rdev_p, *pbl_size << 3); + if (!*pbl_addr) { + return -ENOMEM; + } + } + + mutex_lock(&rdev_p->ctrl_qp.lock); + + /* write PBL first if any - update pbl only if pbl list exist */ + if (pbl) { + + PDBG("%s *pdb_addr 0x%x, pbl_base 0x%x, pbl_size %d\n", + __FUNCTION__, *pbl_addr, rdev_p->rnic_info.pbl_base, + *pbl_size); + err = cxio_hal_ctrl_qp_write_mem(rdev_p, + (*pbl_addr >> 5), + (*pbl_size << 3), pbl, 0); + if (err) + goto ret; + } + + /* write TPT entry */ + if (reset_tpt_entry) + memset(&tpt, 0, sizeof(tpt)); + else { + tpt.valid_stag_pdid = cpu_to_be32(F_TPT_VALID | + V_TPT_STAG_KEY((*stag) & M_TPT_STAG_KEY) | + V_TPT_STAG_STATE(stag_state) | + V_TPT_STAG_TYPE(type) | V_TPT_PDID(pdid)); + BUG_ON(page_size >= 28); + tpt.flags_pagesize_qpid = cpu_to_be32(V_TPT_PERM(perm) | + F_TPT_MW_BIND_ENABLE | + V_TPT_ADDR_TYPE((zbva ? TPT_ZBTO : TPT_VATO)) | + V_TPT_PAGE_SIZE(page_size)); + tpt.rsvd_pbl_addr = reset_tpt_entry ? 0 : + cpu_to_be32(V_TPT_PBL_ADDR(PBL_OFF(rdev_p, *pbl_addr)>>3)); + tpt.len = cpu_to_be32(len); + tpt.va_hi = cpu_to_be32((u32) (to >> 32)); + tpt.va_low_or_fbo = cpu_to_be32((u32) (to & 0xFFFFFFFFULL)); + tpt.rsvd_bind_cnt_or_pstag = 0; + tpt.rsvd_pbl_size = reset_tpt_entry ? 0 : + cpu_to_be32(V_TPT_PBL_SIZE((*pbl_size) >> 2)); + } + err = cxio_hal_ctrl_qp_write_mem(rdev_p, + stag_idx + + (rdev_p->rnic_info.tpt_base >> 5), + sizeof(tpt), &tpt, 1); + + /* release the stag index to free pool */ + if (reset_tpt_entry) + cxio_hal_put_stag(rdev_p->rscp, stag_idx); +ret: + wptr = rdev_p->ctrl_qp.wptr; + mutex_unlock(&rdev_p->ctrl_qp.lock); + if (!err) + if (wait_event_interruptible(rdev_p->ctrl_qp.waitq, + SEQ32_GE(rdev_p->ctrl_qp.rptr, + wptr))) + return -ERESTARTSYS; + return err; +} + +/* IN : stag key, pdid, pbl_size + * Out: stag index, actaul pbl_size, and pbl_addr allocated. + */ +int cxio_allocate_stag(struct cxio_rdev *rdev_p, u32 * stag, u32 pdid, + enum tpt_mem_perm perm, u32 * pbl_size, u32 * pbl_addr) +{ + *stag = T3_STAG_UNSET; + return (__cxio_tpt_op(rdev_p, 0, stag, 0, pdid, TPT_NON_SHARED_MR, + perm, 0, 0ULL, 0, 0, NULL, pbl_size, pbl_addr)); +} + +int cxio_register_phys_mem(struct cxio_rdev *rdev_p, u32 *stag, u32 pdid, + enum tpt_mem_perm perm, u32 zbva, u64 to, u32 len, + u8 page_size, __be64 *pbl, u32 *pbl_size, + u32 *pbl_addr) +{ + *stag = T3_STAG_UNSET; + return __cxio_tpt_op(rdev_p, 0, stag, 1, pdid, TPT_NON_SHARED_MR, perm, + zbva, to, len, page_size, pbl, pbl_size, pbl_addr); +} + +int cxio_reregister_phys_mem(struct cxio_rdev *rdev_p, u32 *stag, u32 pdid, + enum tpt_mem_perm perm, u32 zbva, u64 to, u32 len, + u8 page_size, __be64 *pbl, u32 *pbl_size, + u32 *pbl_addr) +{ + return __cxio_tpt_op(rdev_p, 0, stag, 1, pdid, TPT_NON_SHARED_MR, perm, + zbva, to, len, page_size, pbl, pbl_size, pbl_addr); +} + +int cxio_dereg_mem(struct cxio_rdev *rdev_p, u32 stag, u32 pbl_size, + u32 pbl_addr) +{ + return __cxio_tpt_op(rdev_p, 1, &stag, 0, 0, 0, 0, 0, 0ULL, 0, 0, NULL, + &pbl_size, &pbl_addr); +} + +int cxio_allocate_window(struct cxio_rdev *rdev_p, u32 * stag, u32 pdid) +{ + u32 pbl_size = 0; + *stag = T3_STAG_UNSET; + return __cxio_tpt_op(rdev_p, 0, stag, 0, pdid, TPT_MW, 0, 0, 0ULL, 0, 0, + NULL, &pbl_size, NULL); +} + +int cxio_deallocate_window(struct cxio_rdev *rdev_p, u32 stag) +{ + return __cxio_tpt_op(rdev_p, 1, &stag, 0, 0, 0, 0, 0, 0ULL, 0, 0, NULL, + NULL, NULL); +} + +int cxio_rdma_init(struct cxio_rdev *rdev_p, struct t3_rdma_init_attr *attr) +{ + struct t3_rdma_init_wr *wqe; + struct sk_buff *skb = alloc_skb(sizeof(*wqe), GFP_ATOMIC); + if (!skb) + return -ENOMEM; + PDBG("%s rdev_p %p\n", __FUNCTION__, rdev_p); + wqe = (struct t3_rdma_init_wr *) __skb_put(skb, sizeof(*wqe)); + wqe->wrh.op_seop_flags = cpu_to_be32(V_FW_RIWR_OP(T3_WR_INIT)); + wqe->wrh.gen_tid_len = cpu_to_be32(V_FW_RIWR_TID(attr->tid) | + V_FW_RIWR_LEN(sizeof(*wqe) >> 3)); + wqe->wrid.id1 = 0; + wqe->qpid = cpu_to_be32(attr->qpid); + wqe->pdid = cpu_to_be32(attr->pdid); + wqe->scqid = cpu_to_be32(attr->scqid); + wqe->rcqid = cpu_to_be32(attr->rcqid); + wqe->rq_addr = cpu_to_be32(attr->rq_addr - rdev_p->rnic_info.rqt_base); + wqe->rq_size = cpu_to_be32(attr->rq_size); + wqe->mpaattrs = attr->mpaattrs; + wqe->qpcaps = attr->qpcaps; + wqe->ulpdu_size = cpu_to_be16(attr->tcp_emss); + wqe->flags = cpu_to_be32(attr->flags); + wqe->ord = cpu_to_be32(attr->ord); + wqe->ird = cpu_to_be32(attr->ird); + wqe->qp_dma_addr = cpu_to_be64(attr->qp_dma_addr); + wqe->qp_dma_size = cpu_to_be32(attr->qp_dma_size); + wqe->rsvd = 0; + skb->priority = 0; /* 0=>ToeQ; 1=>CtrlQ */ + return (cxgb3_ofld_send(rdev_p->t3cdev_p, skb)); +} + +void cxio_register_ev_cb(cxio_hal_ev_callback_func_t ev_cb) +{ + cxio_ev_cb = ev_cb; +} + +void cxio_unregister_ev_cb(cxio_hal_ev_callback_func_t ev_cb) +{ + cxio_ev_cb = NULL; +} + +static int cxio_hal_ev_handler(struct t3cdev *t3cdev_p, struct sk_buff *skb) +{ + static int cnt; + struct cxio_rdev *rdev_p = NULL; + struct respQ_msg_t *rsp_msg = (struct respQ_msg_t *) skb->data; + PDBG("%d: %s cq_id 0x%x cq_ptr 0x%x genbit %0x overflow %0x an %0x" + " se %0x notify %0x cqbranch %0x creditth %0x\n", + cnt, __FUNCTION__, RSPQ_CQID(rsp_msg), RSPQ_CQPTR(rsp_msg), + RSPQ_GENBIT(rsp_msg), RSPQ_OVERFLOW(rsp_msg), RSPQ_AN(rsp_msg), + RSPQ_SE(rsp_msg), RSPQ_NOTIFY(rsp_msg), RSPQ_CQBRANCH(rsp_msg), + RSPQ_CREDIT_THRESH(rsp_msg)); + PDBG("CQE: QPID 0x%0x genbit %0x type 0x%0x status 0x%0x opcode %d " + "len 0x%0x wrid_hi_stag 0x%x wrid_low_msn 0x%x\n", + CQE_QPID(rsp_msg->cqe), CQE_GENBIT(rsp_msg->cqe), + CQE_TYPE(rsp_msg->cqe), CQE_STATUS(rsp_msg->cqe), + CQE_OPCODE(rsp_msg->cqe), CQE_LEN(rsp_msg->cqe), + CQE_WRID_HI(rsp_msg->cqe), CQE_WRID_LOW(rsp_msg->cqe)); + rdev_p = (struct cxio_rdev *)t3cdev_p->ulp; + if (!rdev_p) { + PDBG("%s called by t3cdev %p with null ulp\n", __FUNCTION__, + t3cdev_p); + return 0; + } + if (CQE_QPID(rsp_msg->cqe) == T3_CTRL_QP_ID) { + rdev_p->ctrl_qp.rptr = CQE_WRID_LOW(rsp_msg->cqe) + 1; + wake_up_interruptible(&rdev_p->ctrl_qp.waitq); + dev_kfree_skb_irq(skb); + } else if (CQE_QPID(rsp_msg->cqe) == 0xfff8) + dev_kfree_skb_irq(skb); + else if (cxio_ev_cb) + (*cxio_ev_cb) (rdev_p, skb); + else + dev_kfree_skb_irq(skb); + cnt++; + return 0; +} + +/* Caller takes care of locking if needed */ +int cxio_rdev_open(struct cxio_rdev *rdev_p) +{ + struct net_device *netdev_p = NULL; + int err = 0; + if (strlen(rdev_p->dev_name)) { + if (cxio_hal_find_rdev_by_name(rdev_p->dev_name)) { + return -EBUSY; + } + netdev_p = dev_get_by_name(rdev_p->dev_name); + if (!netdev_p) { + return -EINVAL; + } + dev_put(netdev_p); + } else if (rdev_p->t3cdev_p) { + if (cxio_hal_find_rdev_by_t3cdev(rdev_p->t3cdev_p)) { + return -EBUSY; + } + netdev_p = rdev_p->t3cdev_p->lldev; + strncpy(rdev_p->dev_name, rdev_p->t3cdev_p->name, + T3_MAX_DEV_NAME_LEN); + } else { + PDBG("%s t3cdev_p or dev_name must be set\n", __FUNCTION__); + return -EINVAL; + } + + list_add_tail(&rdev_p->entry, &rdev_list); + + PDBG("%s opening rnic dev %s\n", __FUNCTION__, rdev_p->dev_name); + memset(&rdev_p->ctrl_qp, 0, sizeof(rdev_p->ctrl_qp)); + if (!rdev_p->t3cdev_p) + rdev_p->t3cdev_p = T3CDEV(netdev_p); + rdev_p->t3cdev_p->ulp = (void *) rdev_p; + err = rdev_p->t3cdev_p->ctl(rdev_p->t3cdev_p, RDMA_GET_PARAMS, + &(rdev_p->rnic_info)); + if (err) { + printk(KERN_ERR "%s t3cdev_p(%p)->ctl returned error %d.\n", + __FUNCTION__, rdev_p->t3cdev_p, err); + goto err1; + } + err = rdev_p->t3cdev_p->ctl(rdev_p->t3cdev_p, GET_PORTS, + &(rdev_p->port_info)); + if (err) { + printk(KERN_ERR "%s t3cdev_p(%p)->ctl returned error %d.\n", + __FUNCTION__, rdev_p->t3cdev_p, err); + goto err1; + } + + /* + * qpshift is the number of bits to shift the qpid left in order + * to get the correct address of the doorbell for that qp. + */ + cxio_init_ucontext(rdev_p, &rdev_p->uctx); + rdev_p->qpshift = PAGE_SHIFT - + ilog2(65536 >> + ilog2(rdev_p->rnic_info.udbell_len >> + PAGE_SHIFT)); + rdev_p->qpnr = rdev_p->rnic_info.udbell_len >> PAGE_SHIFT; + rdev_p->qpmask = (65536 >> ilog2(rdev_p->qpnr)) - 1; + PDBG("%s rnic %s info: tpt_base 0x%0x tpt_top 0x%0x num stags %d " + "pbl_base 0x%0x pbl_top 0x%0x rqt_base 0x%0x, rqt_top 0x%0x\n", + __FUNCTION__, rdev_p->dev_name, rdev_p->rnic_info.tpt_base, + rdev_p->rnic_info.tpt_top, cxio_num_stags(rdev_p), + rdev_p->rnic_info.pbl_base, + rdev_p->rnic_info.pbl_top, rdev_p->rnic_info.rqt_base, + rdev_p->rnic_info.rqt_top); + PDBG("udbell_len 0x%0x udbell_physbase 0x%lx kdb_addr %p qpshift %lu " + "qpnr %d qpmask 0x%x\n", + rdev_p->rnic_info.udbell_len, + rdev_p->rnic_info.udbell_physbase, rdev_p->rnic_info.kdb_addr, + rdev_p->qpshift, rdev_p->qpnr, rdev_p->qpmask); + + err = cxio_hal_init_ctrl_qp(rdev_p); + if (err) { + printk(KERN_ERR "%s error %d initializing ctrl_qp.\n", + __FUNCTION__, err); + goto err1; + } + err = cxio_hal_init_resource(rdev_p, cxio_num_stags(rdev_p), 0, + 0, T3_MAX_NUM_QP, T3_MAX_NUM_CQ, + T3_MAX_NUM_PD); + if (err) { + printk(KERN_ERR "%s error %d initializing hal resources.\n", + __FUNCTION__, err); + goto err2; + } + err = cxio_hal_pblpool_create(rdev_p); + if (err) { + printk(KERN_ERR "%s error %d initializing pbl mem pool.\n", + __FUNCTION__, err); + goto err3; + } + err = cxio_hal_rqtpool_create(rdev_p); + if (err) { + printk(KERN_ERR "%s error %d initializing rqt mem pool.\n", + __FUNCTION__, err); + goto err4; + } + return 0; +err4: + cxio_hal_pblpool_destroy(rdev_p); +err3: + cxio_hal_destroy_resource(rdev_p->rscp); +err2: + cxio_hal_destroy_ctrl_qp(rdev_p); +err1: + list_del(&rdev_p->entry); + return err; +} + +void cxio_rdev_close(struct cxio_rdev *rdev_p) +{ + if (rdev_p) { + cxio_hal_pblpool_destroy(rdev_p); + cxio_hal_rqtpool_destroy(rdev_p); + list_del(&rdev_p->entry); + rdev_p->t3cdev_p->ulp = NULL; + cxio_hal_destroy_ctrl_qp(rdev_p); + cxio_hal_destroy_resource(rdev_p->rscp); + } +} + +int __init cxio_hal_init(void) +{ + if (cxio_hal_init_rhdl_resource(T3_MAX_NUM_RI)) + return -ENOMEM; + t3_register_cpl_handler(CPL_ASYNC_NOTIF, cxio_hal_ev_handler); + return 0; +} + +void __exit cxio_hal_exit(void) +{ + struct cxio_rdev *rdev, *tmp; + + t3_register_cpl_handler(CPL_ASYNC_NOTIF, NULL); + list_for_each_entry_safe(rdev, tmp, &rdev_list, entry) + cxio_rdev_close(rdev); + cxio_hal_destroy_rhdl_resource(); +} + +static inline void flush_completed_wrs(struct t3_wq *wq, struct t3_cq *cq) +{ + struct t3_swsq *sqp; + __u32 ptr = wq->sq_rptr; + int count = Q_COUNT(wq->sq_rptr, wq->sq_wptr); + + sqp = wq->sq + Q_PTR2IDX(ptr, wq->sq_size_log2); + while (count--) + if (!sqp->signaled) { + ptr++; + sqp = wq->sq + Q_PTR2IDX(ptr, wq->sq_size_log2); + } else if (sqp->complete) { + + /* + * Insert this completed cqe into the swcq. + */ + PDBG("%s moving cqe into swcq sq idx %ld cq idx %ld\n", + __FUNCTION__, Q_PTR2IDX(ptr, wq->sq_size_log2), + Q_PTR2IDX(cq->sw_wptr, cq->size_log2)); + sqp->cqe.header |= htonl(V_CQE_SWCQE(1)); + *(cq->sw_queue + Q_PTR2IDX(cq->sw_wptr, cq->size_log2)) + = sqp->cqe; + cq->sw_wptr++; + sqp->signaled = 0; + break; + } else + break; +} + +static inline void create_read_req_cqe(struct t3_wq *wq, + struct t3_cqe *hw_cqe, + struct t3_cqe *read_cqe) +{ + read_cqe->u.scqe.wrid_hi = wq->oldest_read->sq_wptr; + read_cqe->len = wq->oldest_read->read_len; + read_cqe->header = htonl(V_CQE_QPID(CQE_QPID(*hw_cqe)) | + V_CQE_SWCQE(SW_CQE(*hw_cqe)) | + V_CQE_OPCODE(T3_READ_REQ) | + V_CQE_TYPE(1)); +} + +/* + * Return a ptr to the next read wr in the SWSQ or NULL. + */ +static inline void advance_oldest_read(struct t3_wq *wq) +{ + + u32 rptr = wq->oldest_read - wq->sq + 1; + u32 wptr = Q_PTR2IDX(wq->sq_wptr, wq->sq_size_log2); + + while (Q_PTR2IDX(rptr, wq->sq_size_log2) != wptr) { + wq->oldest_read = wq->sq + Q_PTR2IDX(rptr, wq->sq_size_log2); + + if (wq->oldest_read->opcode == T3_READ_REQ) + return; + rptr++; + } + wq->oldest_read = NULL; +} + +/* + * cxio_poll_cq + * + * Caller must: + * check the validity of the first CQE, + * supply the wq assicated with the qpid. + * + * credit: cq credit to return to sge. + * cqe_flushed: 1 iff the CQE is flushed. + * cqe: copy of the polled CQE. + * + * return value: + * 0 CQE returned, + * -1 CQE skipped, try again. + */ +int cxio_poll_cq(struct t3_wq *wq, struct t3_cq *cq, struct t3_cqe *cqe, + u8 *cqe_flushed, u64 *cookie, u32 *credit) +{ + int ret = 0; + struct t3_cqe *hw_cqe, read_cqe; + + *cqe_flushed = 0; + *credit = 0; + hw_cqe = cxio_next_cqe(cq); + + PDBG("%s CQE OOO %d qpid 0x%0x genbit %d type %d status 0x%0x" + " opcode 0x%0x len 0x%0x wrid_hi_stag 0x%x wrid_low_msn 0x%x\n", + __FUNCTION__, CQE_OOO(*hw_cqe), CQE_QPID(*hw_cqe), + CQE_GENBIT(*hw_cqe), CQE_TYPE(*hw_cqe), CQE_STATUS(*hw_cqe), + CQE_OPCODE(*hw_cqe), CQE_LEN(*hw_cqe), CQE_WRID_HI(*hw_cqe), + CQE_WRID_LOW(*hw_cqe)); + + /* + * skip cqe's not affiliated with a QP. + */ + if (wq == NULL) { + ret = -1; + goto skip_cqe; + } + + /* + * Gotta tweak READ completions: + * 1) the cqe doesn't contain the sq_wptr from the wr. + * 2) opcode not reflected from the wr. + * 3) read_len not reflected from the wr. + * 4) cq_type is RQ_TYPE not SQ_TYPE. + */ + if (RQ_TYPE(*hw_cqe) && (CQE_OPCODE(*hw_cqe) == T3_READ_RESP)) { + + /* + * Don't write to the HWCQ, so create a new read req CQE + * in local memory. + */ + create_read_req_cqe(wq, hw_cqe, &read_cqe); + hw_cqe = &read_cqe; + advance_oldest_read(wq); + } + + /* + * T3A: Discard TERMINATE CQEs. + */ + if (CQE_OPCODE(*hw_cqe) == T3_TERMINATE) { + ret = -1; + wq->error = 1; + goto skip_cqe; + } + + if (CQE_STATUS(*hw_cqe) || wq->error) { + *cqe_flushed = wq->error; + wq->error = 1; + + /* + * T3A inserts errors into the CQE. We cannot return + * these as work completions. + */ + /* incoming write failures */ + if ((CQE_OPCODE(*hw_cqe) == T3_RDMA_WRITE) + && RQ_TYPE(*hw_cqe)) { + ret = -1; + goto skip_cqe; + } + /* incoming read request failures */ + if ((CQE_OPCODE(*hw_cqe) == T3_READ_RESP) && SQ_TYPE(*hw_cqe)) { + ret = -1; + goto skip_cqe; + } + + /* incoming SEND with no receive posted failures */ + if ((CQE_OPCODE(*hw_cqe) == T3_SEND) && RQ_TYPE(*hw_cqe) && + Q_EMPTY(wq->rq_rptr, wq->rq_wptr)) { + ret = -1; + goto skip_cqe; + } + goto proc_cqe; + } + + /* + * RECV completion. + */ + if (RQ_TYPE(*hw_cqe)) { + + /* + * HW only validates 4 bits of MSN. So we must validate that + * the MSN in the SEND is the next expected MSN. If its not, + * then we complete this with TPT_ERR_MSN and mark the wq in + * error. + */ + if (unlikely((CQE_WRID_MSN(*hw_cqe) != (wq->rq_rptr + 1)))) { + wq->error = 1; + hw_cqe->header |= htonl(V_CQE_STATUS(TPT_ERR_MSN)); + goto proc_cqe; + } + goto proc_cqe; + } + + /* + * If we get here its a send completion. + * + * Handle out of order completion. These get stuffed + * in the SW SQ. Then the SW SQ is walked to move any + * now in-order completions into the SW CQ. This handles + * 2 cases: + * 1) reaping unsignaled WRs when the first subsequent + * signaled WR is completed. + * 2) out of order read completions. + */ + if (!SW_CQE(*hw_cqe) && (CQE_WRID_SQ_WPTR(*hw_cqe) != wq->sq_rptr)) { + struct t3_swsq *sqp; + + PDBG("%s out of order completion going in swsq at idx %ld\n", + __FUNCTION__, + Q_PTR2IDX(CQE_WRID_SQ_WPTR(*hw_cqe), wq->sq_size_log2)); + sqp = wq->sq + + Q_PTR2IDX(CQE_WRID_SQ_WPTR(*hw_cqe), wq->sq_size_log2); + sqp->cqe = *hw_cqe; + sqp->complete = 1; + ret = -1; + goto flush_wq; + } + +proc_cqe: + *cqe = *hw_cqe; + + /* + * Reap the associated WR(s) that are freed up with this + * completion. + */ + if (SQ_TYPE(*hw_cqe)) { + wq->sq_rptr = CQE_WRID_SQ_WPTR(*hw_cqe); + PDBG("%s completing sq idx %ld\n", __FUNCTION__, + Q_PTR2IDX(wq->sq_rptr, wq->sq_size_log2)); + *cookie = (wq->sq + + Q_PTR2IDX(wq->sq_rptr, wq->sq_size_log2))->wr_id; + wq->sq_rptr++; + } else { + PDBG("%s completing rq idx %ld\n", __FUNCTION__, + Q_PTR2IDX(wq->rq_rptr, wq->rq_size_log2)); + *cookie = *(wq->rq + Q_PTR2IDX(wq->rq_rptr, wq->rq_size_log2)); + wq->rq_rptr++; + } + +flush_wq: + /* + * Flush any completed cqes that are now in-order. + */ + flush_completed_wrs(wq, cq); + +skip_cqe: + if (SW_CQE(*hw_cqe)) { + PDBG("%s cq %p cqid 0x%x skip sw cqe sw_rptr 0x%x\n", + __FUNCTION__, cq, cq->cqid, cq->sw_rptr); + ++cq->sw_rptr; + } else { + PDBG("%s cq %p cqid 0x%x skip hw cqe rptr 0x%x\n", + __FUNCTION__, cq, cq->cqid, cq->rptr); + ++cq->rptr; + + /* + * T3A: compute credits. + */ + if (((cq->rptr - cq->wptr) > (1 << (cq->size_log2 - 1))) + || ((cq->rptr - cq->wptr) >= 128)) { + *credit = cq->rptr - cq->wptr; + cq->wptr = cq->rptr; + } + } + return ret; +} diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.h b/drivers/infiniband/hw/cxgb3/cxio_hal.h new file mode 100644 index 0000000..1b97e80 --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/cxio_hal.h @@ -0,0 +1,201 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef __CXIO_HAL_H__ +#define __CXIO_HAL_H__ + +#include +#include + +#include "t3_cpl.h" +#include "t3cdev.h" +#include "cxgb3_ctl_defs.h" +#include "cxio_wr.h" + +#define T3_CTRL_QP_ID FW_RI_SGEEC_START +#define T3_CTL_QP_TID FW_RI_TID_START +#define T3_CTRL_QP_SIZE_LOG2 8 +#define T3_CTRL_CQ_ID 0 + +/* TBD */ +#define T3_MAX_NUM_RI (1<<15) +#define T3_MAX_NUM_QP (1<<15) +#define T3_MAX_NUM_CQ (1<<15) +#define T3_MAX_NUM_PD (1<<15) +#define T3_MAX_PBL_SIZE 256 +#define T3_MAX_RQ_SIZE 1024 +#define T3_MAX_NUM_STAG (1<<15) + +#define T3_STAG_UNSET 0xffffffff + +#define T3_MAX_DEV_NAME_LEN 32 + +struct cxio_hal_ctrl_qp { + u32 wptr; + u32 rptr; + struct mutex lock; /* for the wtpr, can sleep */ + wait_queue_head_t waitq;/* wait for RspQ/CQE msg */ + union t3_wr *workq; /* the work request queue */ + dma_addr_t dma_addr; /* pci bus address of the workq */ + DECLARE_PCI_UNMAP_ADDR(mapping) + void __iomem *doorbell; +}; + +struct cxio_hal_resource { + struct kfifo *tpt_fifo; + spinlock_t tpt_fifo_lock; + struct kfifo *qpid_fifo; + spinlock_t qpid_fifo_lock; + struct kfifo *cqid_fifo; + spinlock_t cqid_fifo_lock; + struct kfifo *pdid_fifo; + spinlock_t pdid_fifo_lock; +}; + +struct cxio_qpid_list { + struct list_head entry; + u32 qpid; +}; + +struct cxio_ucontext { + struct list_head qpids; + struct mutex lock; +}; + +struct cxio_rdev { + char dev_name[T3_MAX_DEV_NAME_LEN]; + struct t3cdev *t3cdev_p; + struct rdma_info rnic_info; + struct adap_ports port_info; + struct cxio_hal_resource *rscp; + struct cxio_hal_ctrl_qp ctrl_qp; + void *ulp; + unsigned long qpshift; + u32 qpnr; + u32 qpmask; + struct cxio_ucontext uctx; + struct gen_pool *pbl_pool; + struct gen_pool *rqt_pool; + struct list_head entry; +}; + +static inline int cxio_num_stags(struct cxio_rdev *rdev_p) +{ + return min((int)T3_MAX_NUM_STAG, (int)((rdev_p->rnic_info.tpt_top - rdev_p->rnic_info.tpt_base) >> 5)); +} + +typedef void (*cxio_hal_ev_callback_func_t) (struct cxio_rdev * rdev_p, + struct sk_buff * skb); + +#define RSPQ_CQID(rsp) (be32_to_cpu(rsp->cq_ptrid) & 0xffff) +#define RSPQ_CQPTR(rsp) ((be32_to_cpu(rsp->cq_ptrid) >> 16) & 0xffff) +#define RSPQ_GENBIT(rsp) ((be32_to_cpu(rsp->flags) >> 16) & 1) +#define RSPQ_OVERFLOW(rsp) ((be32_to_cpu(rsp->flags) >> 17) & 1) +#define RSPQ_AN(rsp) ((be32_to_cpu(rsp->flags) >> 18) & 1) +#define RSPQ_SE(rsp) ((be32_to_cpu(rsp->flags) >> 19) & 1) +#define RSPQ_NOTIFY(rsp) ((be32_to_cpu(rsp->flags) >> 20) & 1) +#define RSPQ_CQBRANCH(rsp) ((be32_to_cpu(rsp->flags) >> 21) & 1) +#define RSPQ_CREDIT_THRESH(rsp) ((be32_to_cpu(rsp->flags) >> 22) & 1) + +struct respQ_msg_t { + __be32 flags; /* flit 0 */ + __be32 cq_ptrid; + __be64 rsvd; /* flit 1 */ + struct t3_cqe cqe; /* flits 2-3 */ +}; + +enum t3_cq_opcode { + CQ_ARM_AN = 0x2, + CQ_ARM_SE = 0x6, + CQ_FORCE_AN = 0x3, + CQ_CREDIT_UPDATE = 0x7 +}; + +int cxio_rdev_open(struct cxio_rdev *rdev); +void cxio_rdev_close(struct cxio_rdev *rdev); +int cxio_hal_cq_op(struct cxio_rdev *rdev, struct t3_cq *cq, + enum t3_cq_opcode op, u32 credit); +int cxio_hal_clear_qp_ctx(struct cxio_rdev *rdev, u32 qpid); +int cxio_create_cq(struct cxio_rdev *rdev, struct t3_cq *cq); +int cxio_destroy_cq(struct cxio_rdev *rdev, struct t3_cq *cq); +int cxio_resize_cq(struct cxio_rdev *rdev, struct t3_cq *cq); +void cxio_release_ucontext(struct cxio_rdev *rdev, struct cxio_ucontext *uctx); +void cxio_init_ucontext(struct cxio_rdev *rdev, struct cxio_ucontext *uctx); +int cxio_create_qp(struct cxio_rdev *rdev, u32 kernel_domain, struct t3_wq *wq, + struct cxio_ucontext *uctx); +int cxio_destroy_qp(struct cxio_rdev *rdev, struct t3_wq *wq, + struct cxio_ucontext *uctx); +int cxio_peek_cq(struct t3_wq *wr, struct t3_cq *cq, int opcode); +int cxio_allocate_stag(struct cxio_rdev *rdev, u32 * stag, u32 pdid, + enum tpt_mem_perm perm, u32 * pbl_size, u32 * pbl_addr); +int cxio_register_phys_mem(struct cxio_rdev *rdev, u32 * stag, u32 pdid, + enum tpt_mem_perm perm, u32 zbva, u64 to, u32 len, + u8 page_size, __be64 *pbl, u32 *pbl_size, + u32 *pbl_addr); +int cxio_reregister_phys_mem(struct cxio_rdev *rdev, u32 * stag, u32 pdid, + enum tpt_mem_perm perm, u32 zbva, u64 to, u32 len, + u8 page_size, __be64 *pbl, u32 *pbl_size, + u32 *pbl_addr); +int cxio_dereg_mem(struct cxio_rdev *rdev, u32 stag, u32 pbl_size, + u32 pbl_addr); +int cxio_allocate_window(struct cxio_rdev *rdev, u32 * stag, u32 pdid); +int cxio_deallocate_window(struct cxio_rdev *rdev, u32 stag); +int cxio_rdma_init(struct cxio_rdev *rdev, struct t3_rdma_init_attr *attr); +void cxio_register_ev_cb(cxio_hal_ev_callback_func_t ev_cb); +void cxio_unregister_ev_cb(cxio_hal_ev_callback_func_t ev_cb); +u32 cxio_hal_get_rhdl(void); +void cxio_hal_put_rhdl(u32 rhdl); +u32 cxio_hal_get_pdid(struct cxio_hal_resource *rscp); +void cxio_hal_put_pdid(struct cxio_hal_resource *rscp, u32 pdid); +int __init cxio_hal_init(void); +void __exit cxio_hal_exit(void); +void cxio_flush_rq(struct t3_wq *wq, struct t3_cq *cq, int count); +void cxio_flush_sq(struct t3_wq *wq, struct t3_cq *cq, int count); +void cxio_count_rcqes(struct t3_cq *cq, struct t3_wq *wq, int *count); +void cxio_count_scqes(struct t3_cq *cq, struct t3_wq *wq, int *count); +void cxio_flush_hw_cq(struct t3_cq *cq); +int cxio_poll_cq(struct t3_wq *wq, struct t3_cq *cq, struct t3_cqe *cqe, + u8 *cqe_flushed, u64 *cookie, u32 *credit); + +#define MOD "iw_cxgb3: " +#define PDBG(fmt, args...) pr_debug(MOD fmt, ## args) + +#ifdef DEBUG +void cxio_dump_tpt(struct cxio_rdev *rev, u32 stag); +void cxio_dump_pbl(struct cxio_rdev *rev, u32 pbl_addr, uint len, u8 shift); +void cxio_dump_wqe(union t3_wr *wqe); +void cxio_dump_wce(struct t3_cqe *wce); +void cxio_dump_rqt(struct cxio_rdev *rdev, u32 hwtid, int nents); +void cxio_dump_tcb(struct cxio_rdev *rdev, u32 hwtid); +#endif + +#endif diff --git a/drivers/infiniband/hw/cxgb3/cxio_resource.c b/drivers/infiniband/hw/cxgb3/cxio_resource.c new file mode 100644 index 0000000..997aa32 --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/cxio_resource.c @@ -0,0 +1,331 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +/* Crude resource management */ +#include +#include +#include +#include +#include +#include +#include "cxio_resource.h" +#include "cxio_hal.h" + +static struct kfifo *rhdl_fifo; +static spinlock_t rhdl_fifo_lock; + +#define RANDOM_SIZE 16 + +static int __cxio_init_resource_fifo(struct kfifo **fifo, + spinlock_t *fifo_lock, + u32 nr, u32 skip_low, + u32 skip_high, + int random) +{ + u32 i, j, entry = 0, idx; + u32 random_bytes; + u32 rarray[16]; + spin_lock_init(fifo_lock); + + *fifo = kfifo_alloc(nr * sizeof(u32), GFP_KERNEL, fifo_lock); + if (IS_ERR(*fifo)) + return -ENOMEM; + + for (i = 0; i < skip_low + skip_high; i++) + __kfifo_put(*fifo, (unsigned char *) &entry, sizeof(u32)); + if (random) { + j = 0; + random_bytes = random32(); + for (i = 0; i < RANDOM_SIZE; i++) + rarray[i] = i + skip_low; + for (i = skip_low + RANDOM_SIZE; i < nr - skip_high; i++) { + if (j >= RANDOM_SIZE) { + j = 0; + random_bytes = random32(); + } + idx = (random_bytes >> (j * 2)) & 0xF; + __kfifo_put(*fifo, + (unsigned char *) &rarray[idx], + sizeof(u32)); + rarray[idx] = i; + j++; + } + for (i = 0; i < RANDOM_SIZE; i++) + __kfifo_put(*fifo, + (unsigned char *) &rarray[i], + sizeof(u32)); + } else + for (i = skip_low; i < nr - skip_high; i++) + __kfifo_put(*fifo, (unsigned char *) &i, sizeof(u32)); + + for (i = 0; i < skip_low + skip_high; i++) + kfifo_get(*fifo, (unsigned char *) &entry, sizeof(u32)); + return 0; +} + +static int cxio_init_resource_fifo(struct kfifo **fifo, spinlock_t * fifo_lock, + u32 nr, u32 skip_low, u32 skip_high) +{ + return (__cxio_init_resource_fifo(fifo, fifo_lock, nr, skip_low, + skip_high, 0)); +} + +static int cxio_init_resource_fifo_random(struct kfifo **fifo, + spinlock_t * fifo_lock, + u32 nr, u32 skip_low, u32 skip_high) +{ + + return (__cxio_init_resource_fifo(fifo, fifo_lock, nr, skip_low, + skip_high, 1)); +} + +static int cxio_init_qpid_fifo(struct cxio_rdev *rdev_p) +{ + u32 i; + + spin_lock_init(&rdev_p->rscp->qpid_fifo_lock); + + rdev_p->rscp->qpid_fifo = kfifo_alloc(T3_MAX_NUM_QP * sizeof(u32), + GFP_KERNEL, + &rdev_p->rscp->qpid_fifo_lock); + if (IS_ERR(rdev_p->rscp->qpid_fifo)) + return -ENOMEM; + + for (i = 16; i < T3_MAX_NUM_QP; i++) + if (!(i & rdev_p->qpmask)) + __kfifo_put(rdev_p->rscp->qpid_fifo, + (unsigned char *) &i, sizeof(u32)); + return 0; +} + +int cxio_hal_init_rhdl_resource(u32 nr_rhdl) +{ + return cxio_init_resource_fifo(&rhdl_fifo, &rhdl_fifo_lock, nr_rhdl, 1, + 0); +} + +void cxio_hal_destroy_rhdl_resource(void) +{ + kfifo_free(rhdl_fifo); +} + +/* nr_* must be power of 2 */ +int cxio_hal_init_resource(struct cxio_rdev *rdev_p, + u32 nr_tpt, u32 nr_pbl, + u32 nr_rqt, u32 nr_qpid, u32 nr_cqid, u32 nr_pdid) +{ + int err = 0; + struct cxio_hal_resource *rscp; + + rscp = kmalloc(sizeof(*rscp), GFP_KERNEL); + if (!rscp) + return -ENOMEM; + rdev_p->rscp = rscp; + err = cxio_init_resource_fifo_random(&rscp->tpt_fifo, + &rscp->tpt_fifo_lock, + nr_tpt, 1, 0); + if (err) + goto tpt_err; + err = cxio_init_qpid_fifo(rdev_p); + if (err) + goto qpid_err; + err = cxio_init_resource_fifo(&rscp->cqid_fifo, &rscp->cqid_fifo_lock, + nr_cqid, 1, 0); + if (err) + goto cqid_err; + err = cxio_init_resource_fifo(&rscp->pdid_fifo, &rscp->pdid_fifo_lock, + nr_pdid, 1, 0); + if (err) + goto pdid_err; + return 0; +pdid_err: + kfifo_free(rscp->cqid_fifo); +cqid_err: + kfifo_free(rscp->qpid_fifo); +qpid_err: + kfifo_free(rscp->tpt_fifo); +tpt_err: + return -ENOMEM; +} + +/* + * returns 0 if no resource available + */ +static inline u32 cxio_hal_get_resource(struct kfifo *fifo) +{ + u32 entry; + if (kfifo_get(fifo, (unsigned char *) &entry, sizeof(u32))) + return entry; + else + return 0; /* fifo emptry */ +} + +static inline void cxio_hal_put_resource(struct kfifo *fifo, u32 entry) +{ + BUG_ON(kfifo_put(fifo, (unsigned char *) &entry, sizeof(u32)) == 0); +} + +u32 cxio_hal_get_rhdl(void) +{ + return cxio_hal_get_resource(rhdl_fifo); +} + +void cxio_hal_put_rhdl(u32 rhdl) +{ + cxio_hal_put_resource(rhdl_fifo, rhdl); +} + +u32 cxio_hal_get_stag(struct cxio_hal_resource *rscp) +{ + return cxio_hal_get_resource(rscp->tpt_fifo); +} + +void cxio_hal_put_stag(struct cxio_hal_resource *rscp, u32 stag) +{ + cxio_hal_put_resource(rscp->tpt_fifo, stag); +} + +u32 cxio_hal_get_qpid(struct cxio_hal_resource *rscp) +{ + u32 qpid = cxio_hal_get_resource(rscp->qpid_fifo); + PDBG("%s qpid 0x%x\n", __FUNCTION__, qpid); + return qpid; +} + +void cxio_hal_put_qpid(struct cxio_hal_resource *rscp, u32 qpid) +{ + PDBG("%s qpid 0x%x\n", __FUNCTION__, qpid); + cxio_hal_put_resource(rscp->qpid_fifo, qpid); +} + +u32 cxio_hal_get_cqid(struct cxio_hal_resource *rscp) +{ + return cxio_hal_get_resource(rscp->cqid_fifo); +} + +void cxio_hal_put_cqid(struct cxio_hal_resource *rscp, u32 cqid) +{ + cxio_hal_put_resource(rscp->cqid_fifo, cqid); +} + +u32 cxio_hal_get_pdid(struct cxio_hal_resource *rscp) +{ + return cxio_hal_get_resource(rscp->pdid_fifo); +} + +void cxio_hal_put_pdid(struct cxio_hal_resource *rscp, u32 pdid) +{ + cxio_hal_put_resource(rscp->pdid_fifo, pdid); +} + +void cxio_hal_destroy_resource(struct cxio_hal_resource *rscp) +{ + kfifo_free(rscp->tpt_fifo); + kfifo_free(rscp->cqid_fifo); + kfifo_free(rscp->qpid_fifo); + kfifo_free(rscp->pdid_fifo); + kfree(rscp); +} + +/* + * PBL Memory Manager. Uses Linux generic allocator. + */ + +#define MIN_PBL_SHIFT 8 /* 256B == min PBL size (32 entries) */ +#define PBL_CHUNK 2*1024*1024 + +u32 cxio_hal_pblpool_alloc(struct cxio_rdev *rdev_p, int size) +{ + unsigned long addr = gen_pool_alloc(rdev_p->pbl_pool, size); + PDBG("%s addr 0x%x size %d\n", __FUNCTION__, (u32)addr, size); + return (u32)addr; +} + +void cxio_hal_pblpool_free(struct cxio_rdev *rdev_p, u32 addr, int size) +{ + PDBG("%s addr 0x%x size %d\n", __FUNCTION__, addr, size); + gen_pool_free(rdev_p->pbl_pool, (unsigned long)addr, size); +} + +int cxio_hal_pblpool_create(struct cxio_rdev *rdev_p) +{ + unsigned long i; + rdev_p->pbl_pool = gen_pool_create(MIN_PBL_SHIFT, -1); + if (rdev_p->pbl_pool) + for (i = rdev_p->rnic_info.pbl_base; + i <= rdev_p->rnic_info.pbl_top - PBL_CHUNK + 1; + i += PBL_CHUNK) + gen_pool_add(rdev_p->pbl_pool, i, PBL_CHUNK, -1); + return rdev_p->pbl_pool ? 0 : -ENOMEM; +} + +void cxio_hal_pblpool_destroy(struct cxio_rdev *rdev_p) +{ + gen_pool_destroy(rdev_p->pbl_pool); +} + +/* + * RQT Memory Manager. Uses Linux generic allocator. + */ + +#define MIN_RQT_SHIFT 10 /* 1KB == mini RQT size (16 entries) */ +#define RQT_CHUNK 2*1024*1024 + +u32 cxio_hal_rqtpool_alloc(struct cxio_rdev *rdev_p, int size) +{ + unsigned long addr = gen_pool_alloc(rdev_p->rqt_pool, size << 6); + PDBG("%s addr 0x%x size %d\n", __FUNCTION__, (u32)addr, size << 6); + return (u32)addr; +} + +void cxio_hal_rqtpool_free(struct cxio_rdev *rdev_p, u32 addr, int size) +{ + PDBG("%s addr 0x%x size %d\n", __FUNCTION__, addr, size << 6); + gen_pool_free(rdev_p->rqt_pool, (unsigned long)addr, size << 6); +} + +int cxio_hal_rqtpool_create(struct cxio_rdev *rdev_p) +{ + unsigned long i; + rdev_p->rqt_pool = gen_pool_create(MIN_RQT_SHIFT, -1); + if (rdev_p->rqt_pool) + for (i = rdev_p->rnic_info.rqt_base; + i <= rdev_p->rnic_info.rqt_top - RQT_CHUNK + 1; + i += RQT_CHUNK) + gen_pool_add(rdev_p->rqt_pool, i, RQT_CHUNK, -1); + return rdev_p->rqt_pool ? 0 : -ENOMEM; +} + +void cxio_hal_rqtpool_destroy(struct cxio_rdev *rdev_p) +{ + gen_pool_destroy(rdev_p->rqt_pool); +} diff --git a/drivers/infiniband/hw/cxgb3/cxio_resource.h b/drivers/infiniband/hw/cxgb3/cxio_resource.h new file mode 100644 index 0000000..a6bbe83 --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/cxio_resource.h @@ -0,0 +1,70 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef __CXIO_RESOURCE_H__ +#define __CXIO_RESOURCE_H__ + +#include +#include +#include +#include +#include +#include +#include +#include "cxio_hal.h" + +extern int cxio_hal_init_rhdl_resource(u32 nr_rhdl); +extern void cxio_hal_destroy_rhdl_resource(void); +extern int cxio_hal_init_resource(struct cxio_rdev *rdev_p, + u32 nr_tpt, u32 nr_pbl, + u32 nr_rqt, u32 nr_qpid, u32 nr_cqid, + u32 nr_pdid); +extern u32 cxio_hal_get_stag(struct cxio_hal_resource *rscp); +extern void cxio_hal_put_stag(struct cxio_hal_resource *rscp, u32 stag); +extern u32 cxio_hal_get_qpid(struct cxio_hal_resource *rscp); +extern void cxio_hal_put_qpid(struct cxio_hal_resource *rscp, u32 qpid); +extern u32 cxio_hal_get_cqid(struct cxio_hal_resource *rscp); +extern void cxio_hal_put_cqid(struct cxio_hal_resource *rscp, u32 cqid); +extern void cxio_hal_destroy_resource(struct cxio_hal_resource *rscp); + +#define PBL_OFF(rdev_p, a) ( (a) - (rdev_p)->rnic_info.pbl_base ) +extern int cxio_hal_pblpool_create(struct cxio_rdev *rdev_p); +extern void cxio_hal_pblpool_destroy(struct cxio_rdev *rdev_p); +extern u32 cxio_hal_pblpool_alloc(struct cxio_rdev *rdev_p, int size); +extern void cxio_hal_pblpool_free(struct cxio_rdev *rdev_p, u32 addr, int size); + +#define RQT_OFF(rdev_p, a) ( (a) - (rdev_p)->rnic_info.rqt_base ) +extern int cxio_hal_rqtpool_create(struct cxio_rdev *rdev_p); +extern void cxio_hal_rqtpool_destroy(struct cxio_rdev *rdev_p); +extern u32 cxio_hal_rqtpool_alloc(struct cxio_rdev *rdev_p, int size); +extern void cxio_hal_rqtpool_free(struct cxio_rdev *rdev_p, u32 addr, int size); +#endif diff --git a/drivers/infiniband/hw/cxgb3/cxio_wr.h b/drivers/infiniband/hw/cxgb3/cxio_wr.h new file mode 100644 index 0000000..103fc42 --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/cxio_wr.h @@ -0,0 +1,685 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef __CXIO_WR_H__ +#define __CXIO_WR_H__ + +#include +#include +#include +#include "firmware_exports.h" + +#define T3_MAX_SGE 4 + +#define Q_EMPTY(rptr,wptr) ((rptr)==(wptr)) +#define Q_FULL(rptr,wptr,size_log2) ( (((wptr)-(rptr))>>(size_log2)) && \ + ((rptr)!=(wptr)) ) +#define Q_GENBIT(ptr,size_log2) (!(((ptr)>>size_log2)&0x1)) +#define Q_FREECNT(rptr,wptr,size_log2) ((1UL<> S_FW_RIWR_OP)) & M_FW_RIWR_OP) + +#define S_FW_RIWR_SOPEOP 22 +#define M_FW_RIWR_SOPEOP 0x3 +#define V_FW_RIWR_SOPEOP(x) ((x) << S_FW_RIWR_SOPEOP) + +#define S_FW_RIWR_FLAGS 8 +#define M_FW_RIWR_FLAGS 0x3fffff +#define V_FW_RIWR_FLAGS(x) ((x) << S_FW_RIWR_FLAGS) +#define G_FW_RIWR_FLAGS(x) ((((x) >> S_FW_RIWR_FLAGS)) & M_FW_RIWR_FLAGS) + +#define S_FW_RIWR_TID 8 +#define V_FW_RIWR_TID(x) ((x) << S_FW_RIWR_TID) + +#define S_FW_RIWR_LEN 0 +#define V_FW_RIWR_LEN(x) ((x) << S_FW_RIWR_LEN) + +#define S_FW_RIWR_GEN 31 +#define V_FW_RIWR_GEN(x) ((x) << S_FW_RIWR_GEN) + +struct t3_sge { + __be32 stag; + __be32 len; + __be64 to; +}; + +/* If num_sgle is zero, flit 5+ contains immediate data.*/ +struct t3_send_wr { + struct fw_riwrh wrh; /* 0 */ + union t3_wrid wrid; /* 1 */ + + u8 rdmaop; /* 2 */ + u8 reserved[3]; + __be32 rem_stag; + __be32 plen; /* 3 */ + __be32 num_sgle; + struct t3_sge sgl[T3_MAX_SGE]; /* 4+ */ +}; + +struct t3_local_inv_wr { + struct fw_riwrh wrh; /* 0 */ + union t3_wrid wrid; /* 1 */ + __be32 stag; /* 2 */ + __be32 reserved3; +}; + +struct t3_rdma_write_wr { + struct fw_riwrh wrh; /* 0 */ + union t3_wrid wrid; /* 1 */ + u8 rdmaop; /* 2 */ + u8 reserved[3]; + __be32 stag_sink; + __be64 to_sink; /* 3 */ + __be32 plen; /* 4 */ + __be32 num_sgle; + struct t3_sge sgl[T3_MAX_SGE]; /* 5+ */ +}; + +struct t3_rdma_read_wr { + struct fw_riwrh wrh; /* 0 */ + union t3_wrid wrid; /* 1 */ + u8 rdmaop; /* 2 */ + u8 reserved[3]; + __be32 rem_stag; + __be64 rem_to; /* 3 */ + __be32 local_stag; /* 4 */ + __be32 local_len; + __be64 local_to; /* 5 */ +}; + +enum t3_addr_type { + T3_VA_BASED_TO = 0x0, + T3_ZERO_BASED_TO = 0x1 +} __attribute__ ((packed)); + +enum t3_mem_perms { + T3_MEM_ACCESS_LOCAL_READ = 0x1, + T3_MEM_ACCESS_LOCAL_WRITE = 0x2, + T3_MEM_ACCESS_REM_READ = 0x4, + T3_MEM_ACCESS_REM_WRITE = 0x8 +} __attribute__ ((packed)); + +struct t3_bind_mw_wr { + struct fw_riwrh wrh; /* 0 */ + union t3_wrid wrid; /* 1 */ + u16 reserved; /* 2 */ + u8 type; + u8 perms; + __be32 mr_stag; + __be32 mw_stag; /* 3 */ + __be32 mw_len; + __be64 mw_va; /* 4 */ + __be32 mr_pbl_addr; /* 5 */ + u8 reserved2[3]; + u8 mr_pagesz; +}; + +struct t3_receive_wr { + struct fw_riwrh wrh; /* 0 */ + union t3_wrid wrid; /* 1 */ + u8 pagesz[T3_MAX_SGE]; + __be32 num_sgle; /* 2 */ + struct t3_sge sgl[T3_MAX_SGE]; /* 3+ */ + __be32 pbl_addr[T3_MAX_SGE]; +}; + +struct t3_bypass_wr { + struct fw_riwrh wrh; + union t3_wrid wrid; /* 1 */ +}; + +struct t3_modify_qp_wr { + struct fw_riwrh wrh; /* 0 */ + union t3_wrid wrid; /* 1 */ + __be32 flags; /* 2 */ + __be32 quiesce; /* 2 */ + __be32 max_ird; /* 3 */ + __be32 max_ord; /* 3 */ + __be64 sge_cmd; /* 4 */ + __be64 ctx1; /* 5 */ + __be64 ctx0; /* 6 */ +}; + +enum t3_modify_qp_flags { + MODQP_QUIESCE = 0x01, + MODQP_MAX_IRD = 0x02, + MODQP_MAX_ORD = 0x04, + MODQP_WRITE_EC = 0x08, + MODQP_READ_EC = 0x10, +}; + + +enum t3_mpa_attrs { + uP_RI_MPA_RX_MARKER_ENABLE = 0x1, + uP_RI_MPA_TX_MARKER_ENABLE = 0x2, + uP_RI_MPA_CRC_ENABLE = 0x4, + uP_RI_MPA_IETF_ENABLE = 0x8 +} __attribute__ ((packed)); + +enum t3_qp_caps { + uP_RI_QP_RDMA_READ_ENABLE = 0x01, + uP_RI_QP_RDMA_WRITE_ENABLE = 0x02, + uP_RI_QP_BIND_ENABLE = 0x04, + uP_RI_QP_FAST_REGISTER_ENABLE = 0x08, + uP_RI_QP_STAG0_ENABLE = 0x10 +} __attribute__ ((packed)); + +struct t3_rdma_init_attr { + u32 tid; + u32 qpid; + u32 pdid; + u32 scqid; + u32 rcqid; + u32 rq_addr; + u32 rq_size; + enum t3_mpa_attrs mpaattrs; + enum t3_qp_caps qpcaps; + u16 tcp_emss; + u32 ord; + u32 ird; + u64 qp_dma_addr; + u32 qp_dma_size; + u32 flags; +}; + +struct t3_rdma_init_wr { + struct fw_riwrh wrh; /* 0 */ + union t3_wrid wrid; /* 1 */ + __be32 qpid; /* 2 */ + __be32 pdid; + __be32 scqid; /* 3 */ + __be32 rcqid; + __be32 rq_addr; /* 4 */ + __be32 rq_size; + u8 mpaattrs; /* 5 */ + u8 qpcaps; + __be16 ulpdu_size; + __be32 flags; /* bits 31-1 - reservered */ + /* bit 0 - set if RECV posted */ + __be32 ord; /* 6 */ + __be32 ird; + __be64 qp_dma_addr; /* 7 */ + __be32 qp_dma_size; /* 8 */ + u32 rsvd; +}; + +struct t3_genbit { + u64 flit[15]; + __be64 genbit; +}; + +enum rdma_init_wr_flags { + RECVS_POSTED = 1, +}; + +union t3_wr { + struct t3_send_wr send; + struct t3_rdma_write_wr write; + struct t3_rdma_read_wr read; + struct t3_receive_wr recv; + struct t3_local_inv_wr local_inv; + struct t3_bind_mw_wr bind; + struct t3_bypass_wr bypass; + struct t3_rdma_init_wr init; + struct t3_modify_qp_wr qp_mod; + struct t3_genbit genbit; + u64 flit[16]; +}; + +#define T3_SQ_CQE_FLIT 13 +#define T3_SQ_COOKIE_FLIT 14 + +#define T3_RQ_COOKIE_FLIT 13 +#define T3_RQ_CQE_FLIT 14 + +static inline enum t3_wr_opcode fw_riwrh_opcode(struct fw_riwrh *wqe) +{ + return G_FW_RIWR_OP(be32_to_cpu(wqe->op_seop_flags)); +} + +static inline void build_fw_riwrh(struct fw_riwrh *wqe, enum t3_wr_opcode op, + enum t3_wr_flags flags, u8 genbit, u32 tid, + u8 len) +{ + wqe->op_seop_flags = cpu_to_be32(V_FW_RIWR_OP(op) | + V_FW_RIWR_SOPEOP(M_FW_RIWR_SOPEOP) | + V_FW_RIWR_FLAGS(flags)); + wmb(); + wqe->gen_tid_len = cpu_to_be32(V_FW_RIWR_GEN(genbit) | + V_FW_RIWR_TID(tid) | + V_FW_RIWR_LEN(len)); + /* 2nd gen bit... */ + ((union t3_wr *)wqe)->genbit.genbit = cpu_to_be64(genbit); +} + +/* + * T3 ULP2_TX commands + */ +enum t3_utx_mem_op { + T3_UTX_MEM_READ = 2, + T3_UTX_MEM_WRITE = 3 +}; + +/* T3 MC7 RDMA TPT entry format */ + +enum tpt_mem_type { + TPT_NON_SHARED_MR = 0x0, + TPT_SHARED_MR = 0x1, + TPT_MW = 0x2, + TPT_MW_RELAXED_PROTECTION = 0x3 +}; + +enum tpt_addr_type { + TPT_ZBTO = 0, + TPT_VATO = 1 +}; + +enum tpt_mem_perm { + TPT_LOCAL_READ = 0x8, + TPT_LOCAL_WRITE = 0x4, + TPT_REMOTE_READ = 0x2, + TPT_REMOTE_WRITE = 0x1 +}; + +struct tpt_entry { + __be32 valid_stag_pdid; + __be32 flags_pagesize_qpid; + + __be32 rsvd_pbl_addr; + __be32 len; + __be32 va_hi; + __be32 va_low_or_fbo; + + __be32 rsvd_bind_cnt_or_pstag; + __be32 rsvd_pbl_size; +}; + +#define S_TPT_VALID 31 +#define V_TPT_VALID(x) ((x) << S_TPT_VALID) +#define F_TPT_VALID V_TPT_VALID(1U) + +#define S_TPT_STAG_KEY 23 +#define M_TPT_STAG_KEY 0xFF +#define V_TPT_STAG_KEY(x) ((x) << S_TPT_STAG_KEY) +#define G_TPT_STAG_KEY(x) (((x) >> S_TPT_STAG_KEY) & M_TPT_STAG_KEY) + +#define S_TPT_STAG_STATE 22 +#define V_TPT_STAG_STATE(x) ((x) << S_TPT_STAG_STATE) +#define F_TPT_STAG_STATE V_TPT_STAG_STATE(1U) + +#define S_TPT_STAG_TYPE 20 +#define M_TPT_STAG_TYPE 0x3 +#define V_TPT_STAG_TYPE(x) ((x) << S_TPT_STAG_TYPE) +#define G_TPT_STAG_TYPE(x) (((x) >> S_TPT_STAG_TYPE) & M_TPT_STAG_TYPE) + +#define S_TPT_PDID 0 +#define M_TPT_PDID 0xFFFFF +#define V_TPT_PDID(x) ((x) << S_TPT_PDID) +#define G_TPT_PDID(x) (((x) >> S_TPT_PDID) & M_TPT_PDID) + +#define S_TPT_PERM 28 +#define M_TPT_PERM 0xF +#define V_TPT_PERM(x) ((x) << S_TPT_PERM) +#define G_TPT_PERM(x) (((x) >> S_TPT_PERM) & M_TPT_PERM) + +#define S_TPT_REM_INV_DIS 27 +#define V_TPT_REM_INV_DIS(x) ((x) << S_TPT_REM_INV_DIS) +#define F_TPT_REM_INV_DIS V_TPT_REM_INV_DIS(1U) + +#define S_TPT_ADDR_TYPE 26 +#define V_TPT_ADDR_TYPE(x) ((x) << S_TPT_ADDR_TYPE) +#define F_TPT_ADDR_TYPE V_TPT_ADDR_TYPE(1U) + +#define S_TPT_MW_BIND_ENABLE 25 +#define V_TPT_MW_BIND_ENABLE(x) ((x) << S_TPT_MW_BIND_ENABLE) +#define F_TPT_MW_BIND_ENABLE V_TPT_MW_BIND_ENABLE(1U) + +#define S_TPT_PAGE_SIZE 20 +#define M_TPT_PAGE_SIZE 0x1F +#define V_TPT_PAGE_SIZE(x) ((x) << S_TPT_PAGE_SIZE) +#define G_TPT_PAGE_SIZE(x) (((x) >> S_TPT_PAGE_SIZE) & M_TPT_PAGE_SIZE) + +#define S_TPT_PBL_ADDR 0 +#define M_TPT_PBL_ADDR 0x1FFFFFFF +#define V_TPT_PBL_ADDR(x) ((x) << S_TPT_PBL_ADDR) +#define G_TPT_PBL_ADDR(x) (((x) >> S_TPT_PBL_ADDR) & M_TPT_PBL_ADDR) + +#define S_TPT_QPID 0 +#define M_TPT_QPID 0xFFFFF +#define V_TPT_QPID(x) ((x) << S_TPT_QPID) +#define G_TPT_QPID(x) (((x) >> S_TPT_QPID) & M_TPT_QPID) + +#define S_TPT_PSTAG 0 +#define M_TPT_PSTAG 0xFFFFFF +#define V_TPT_PSTAG(x) ((x) << S_TPT_PSTAG) +#define G_TPT_PSTAG(x) (((x) >> S_TPT_PSTAG) & M_TPT_PSTAG) + +#define S_TPT_PBL_SIZE 0 +#define M_TPT_PBL_SIZE 0xFFFFF +#define V_TPT_PBL_SIZE(x) ((x) << S_TPT_PBL_SIZE) +#define G_TPT_PBL_SIZE(x) (((x) >> S_TPT_PBL_SIZE) & M_TPT_PBL_SIZE) + +/* + * CQE defs + */ +struct t3_cqe { + __be32 header; + __be32 len; + union { + struct { + __be32 stag; + __be32 msn; + } rcqe; + struct { + u32 wrid_hi; + u32 wrid_low; + } scqe; + } u; +}; + +#define S_CQE_OOO 31 +#define M_CQE_OOO 0x1 +#define G_CQE_OOO(x) ((((x) >> S_CQE_OOO)) & M_CQE_OOO) +#define V_CEQ_OOO(x) ((x)<> S_CQE_QPID)) & M_CQE_QPID) +#define V_CQE_QPID(x) ((x)<> S_CQE_SWCQE)) & M_CQE_SWCQE) +#define V_CQE_SWCQE(x) ((x)<> S_CQE_GENBIT) & M_CQE_GENBIT) +#define V_CQE_GENBIT(x) ((x)<> S_CQE_STATUS)) & M_CQE_STATUS) +#define V_CQE_STATUS(x) ((x)<> S_CQE_TYPE)) & M_CQE_TYPE) +#define V_CQE_TYPE(x) ((x)<> S_CQE_OPCODE)) & M_CQE_OPCODE) +#define V_CQE_OPCODE(x) ((x)<queue->flit[13] = 1; +} + +static inline struct t3_cqe *cxio_next_hw_cqe(struct t3_cq *cq) +{ + struct t3_cqe *cqe; + + cqe = cq->queue + (Q_PTR2IDX(cq->rptr, cq->size_log2)); + if (CQ_VLD_ENTRY(cq->rptr, cq->size_log2, cqe)) + return cqe; + return NULL; +} + +static inline struct t3_cqe *cxio_next_sw_cqe(struct t3_cq *cq) +{ + struct t3_cqe *cqe; + + if (!Q_EMPTY(cq->sw_rptr, cq->sw_wptr)) { + cqe = cq->sw_queue + (Q_PTR2IDX(cq->sw_rptr, cq->size_log2)); + return cqe; + } + return NULL; +} + +static inline struct t3_cqe *cxio_next_cqe(struct t3_cq *cq) +{ + struct t3_cqe *cqe; + + if (!Q_EMPTY(cq->sw_rptr, cq->sw_wptr)) { + cqe = cq->sw_queue + (Q_PTR2IDX(cq->sw_rptr, cq->size_log2)); + return cqe; + } + cqe = cq->queue + (Q_PTR2IDX(cq->rptr, cq->size_log2)); + if (CQ_VLD_ENTRY(cq->rptr, cq->size_log2, cqe)) + return cqe; + return NULL; +} + +#endif diff --git a/drivers/infiniband/hw/cxgb3/iwch.c b/drivers/infiniband/hw/cxgb3/iwch.c new file mode 100644 index 0000000..4611afa --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/iwch.c @@ -0,0 +1,189 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include +#include + +#include + +#include "cxgb3_offload.h" +#include "iwch_provider.h" +#include "iwch_user.h" +#include "iwch.h" +#include "iwch_cm.h" + +#define DRV_VERSION "1.1" + +MODULE_AUTHOR("Boyd Faulkner, Steve Wise"); +MODULE_DESCRIPTION("Chelsio T3 RDMA Driver"); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_VERSION(DRV_VERSION); + +cxgb3_cpl_handler_func t3c_handlers[NUM_CPL_CMDS]; + +static void open_rnic_dev(struct t3cdev *); +static void close_rnic_dev(struct t3cdev *); + +struct cxgb3_client t3c_client = { + .name = "iw_cxgb3", + .add = open_rnic_dev, + .remove = close_rnic_dev, + .handlers = t3c_handlers, + .redirect = iwch_ep_redirect +}; + +static LIST_HEAD(dev_list); +static DEFINE_MUTEX(dev_mutex); + +static void rnic_init(struct iwch_dev *rnicp) +{ + PDBG("%s iwch_dev %p\n", __FUNCTION__, rnicp); + idr_init(&rnicp->cqidr); + idr_init(&rnicp->qpidr); + idr_init(&rnicp->mmidr); + spin_lock_init(&rnicp->lock); + + rnicp->attr.vendor_id = 0x168; + rnicp->attr.vendor_part_id = 7; + rnicp->attr.max_qps = T3_MAX_NUM_QP - 32; + rnicp->attr.max_wrs = (1UL << 24) - 1; + rnicp->attr.max_sge_per_wr = T3_MAX_SGE; + rnicp->attr.max_sge_per_rdma_write_wr = T3_MAX_SGE; + rnicp->attr.max_cqs = T3_MAX_NUM_CQ - 1; + rnicp->attr.max_cqes_per_cq = (1UL << 24) - 1; + rnicp->attr.max_mem_regs = cxio_num_stags(&rnicp->rdev); + rnicp->attr.max_phys_buf_entries = T3_MAX_PBL_SIZE; + rnicp->attr.max_pds = T3_MAX_NUM_PD - 1; + rnicp->attr.mem_pgsizes_bitmask = 0x7FFF; /* 4KB-128MB */ + rnicp->attr.can_resize_wq = 0; + rnicp->attr.max_rdma_reads_per_qp = 8; + rnicp->attr.max_rdma_read_resources = + rnicp->attr.max_rdma_reads_per_qp * rnicp->attr.max_qps; + rnicp->attr.max_rdma_read_qp_depth = 8; /* IRD */ + rnicp->attr.max_rdma_read_depth = + rnicp->attr.max_rdma_read_qp_depth * rnicp->attr.max_qps; + rnicp->attr.rq_overflow_handled = 0; + rnicp->attr.can_modify_ird = 0; + rnicp->attr.can_modify_ord = 0; + rnicp->attr.max_mem_windows = rnicp->attr.max_mem_regs - 1; + rnicp->attr.stag0_value = 1; + rnicp->attr.zbva_support = 1; + rnicp->attr.local_invalidate_fence = 1; + rnicp->attr.cq_overflow_detection = 1; + return; +} + +static void open_rnic_dev(struct t3cdev *tdev) +{ + struct iwch_dev *rnicp; + static int vers_printed; + + PDBG("%s t3cdev %p\n", __FUNCTION__, tdev); + if (!vers_printed++) + printk(KERN_INFO MOD "Chelsio T3 RDMA Driver - version %s\n", + DRV_VERSION); + rnicp = (struct iwch_dev *)ib_alloc_device(sizeof(*rnicp)); + if (!rnicp) { + printk(KERN_ERR MOD "Cannot allocate ib device\n"); + return; + } + rnicp->rdev.ulp = rnicp; + rnicp->rdev.t3cdev_p = tdev; + + mutex_lock(&dev_mutex); + + if (cxio_rdev_open(&rnicp->rdev)) { + mutex_unlock(&dev_mutex); + printk(KERN_ERR MOD "Unable to open CXIO rdev\n"); + ib_dealloc_device(&rnicp->ibdev); + return; + } + + rnic_init(rnicp); + + list_add_tail(&rnicp->entry, &dev_list); + mutex_unlock(&dev_mutex); + + if (iwch_register_device(rnicp)) { + printk(KERN_ERR MOD "Unable to register device\n"); + close_rnic_dev(tdev); + } + printk(KERN_INFO MOD "Initialized device %s\n", + pci_name(rnicp->rdev.rnic_info.pdev)); + return; +} + +static void close_rnic_dev(struct t3cdev *tdev) +{ + struct iwch_dev *dev, *tmp; + PDBG("%s t3cdev %p\n", __FUNCTION__, tdev); + mutex_lock(&dev_mutex); + list_for_each_entry_safe(dev, tmp, &dev_list, entry) { + if (dev->rdev.t3cdev_p == tdev) { + list_del(&dev->entry); + iwch_unregister_device(dev); + cxio_rdev_close(&dev->rdev); + idr_destroy(&dev->cqidr); + idr_destroy(&dev->qpidr); + idr_destroy(&dev->mmidr); + ib_dealloc_device(&dev->ibdev); + break; + } + } + mutex_unlock(&dev_mutex); +} + +static int __init iwch_init_module(void) +{ + int err; + + err = cxio_hal_init(); + if (err) + return err; + err = iwch_cm_init(); + if (err) + return err; + cxio_register_ev_cb(iwch_ev_dispatch); + cxgb3_register_client(&t3c_client); + return 0; +} + +static void __exit iwch_exit_module(void) +{ + cxgb3_unregister_client(&t3c_client); + cxio_unregister_ev_cb(iwch_ev_dispatch); + iwch_cm_term(); + cxio_hal_exit(); +} + +module_init(iwch_init_module); +module_exit(iwch_exit_module); diff --git a/drivers/infiniband/hw/cxgb3/iwch.h b/drivers/infiniband/hw/cxgb3/iwch.h new file mode 100644 index 0000000..6517ef8 --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/iwch.h @@ -0,0 +1,177 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef __IWCH_H__ +#define __IWCH_H__ + +#include +#include +#include +#include + +#include + +#include "cxio_hal.h" +#include "cxgb3_offload.h" + +struct iwch_pd; +struct iwch_cq; +struct iwch_qp; +struct iwch_mr; + +struct iwch_rnic_attributes { + u32 vendor_id; + u32 vendor_part_id; + u32 max_qps; + u32 max_wrs; /* Max for any SQ/RQ */ + u32 max_sge_per_wr; + u32 max_sge_per_rdma_write_wr; /* for RDMA Write WR */ + u32 max_cqs; + u32 max_cqes_per_cq; + u32 max_mem_regs; + u32 max_phys_buf_entries; /* for phys buf list */ + u32 max_pds; + + /* + * The memory page sizes supported by this RNIC. + * Bit position i in bitmap indicates page of + * size (4k)^i. Phys block list mode unsupported. + */ + u32 mem_pgsizes_bitmask; + u8 can_resize_wq; + + /* + * The maximum number of RDMA Reads that can be outstanding + * per QP with this RNIC as the target. + */ + u32 max_rdma_reads_per_qp; + + /* + * The maximum number of resources used for RDMA Reads + * by this RNIC with this RNIC as the target. + */ + u32 max_rdma_read_resources; + + /* + * The max depth per QP for initiation of RDMA Read + * by this RNIC. + */ + u32 max_rdma_read_qp_depth; + + /* + * The maximum depth for initiation of RDMA Read + * operations by this RNIC on all QPs + */ + u32 max_rdma_read_depth; + u8 rq_overflow_handled; + u32 can_modify_ird; + u32 can_modify_ord; + u32 max_mem_windows; + u32 stag0_value; + u8 zbva_support; + u8 local_invalidate_fence; + u32 cq_overflow_detection; +}; + +struct iwch_dev { + struct ib_device ibdev; + struct cxio_rdev rdev; + u32 device_cap_flags; + struct iwch_rnic_attributes attr; + struct idr cqidr; + struct idr qpidr; + struct idr mmidr; + spinlock_t lock; + struct list_head entry; +}; + +static inline struct iwch_dev *to_iwch_dev(struct ib_device *ibdev) +{ + return container_of(ibdev, struct iwch_dev, ibdev); +} + +static inline int t3b_device(const struct iwch_dev *rhp) +{ + return rhp->rdev.t3cdev_p->type == T3B; +} + +static inline int t3a_device(const struct iwch_dev *rhp) +{ + return rhp->rdev.t3cdev_p->type == T3A; +} + +static inline struct iwch_cq *get_chp(struct iwch_dev *rhp, u32 cqid) +{ + return idr_find(&rhp->cqidr, cqid); +} + +static inline struct iwch_qp *get_qhp(struct iwch_dev *rhp, u32 qpid) +{ + return idr_find(&rhp->qpidr, qpid); +} + +static inline struct iwch_mr *get_mhp(struct iwch_dev *rhp, u32 mmid) +{ + return idr_find(&rhp->mmidr, mmid); +} + +static inline int insert_handle(struct iwch_dev *rhp, struct idr *idr, + void *handle, u32 id) +{ + int ret; + u32 newid; + + do { + if (!idr_pre_get(idr, GFP_KERNEL)) { + return -ENOMEM; + } + spin_lock_irq(&rhp->lock); + ret = idr_get_new_above(idr, handle, id, &newid); + BUG_ON(newid != id); + spin_unlock_irq(&rhp->lock); + } while (ret == -EAGAIN); + + return ret; +} + +static inline void remove_handle(struct iwch_dev *rhp, struct idr *idr, u32 id) +{ + spin_lock_irq(&rhp->lock); + idr_remove(idr, id); + spin_unlock_irq(&rhp->lock); +} + +extern struct cxgb3_client t3c_client; +extern cxgb3_cpl_handler_func t3c_handlers[NUM_CPL_CMDS]; +extern void iwch_ev_dispatch(struct cxio_rdev *rdev_p, struct sk_buff *skb); + +#endif diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c new file mode 100644 index 0000000..a522b1b --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c @@ -0,0 +1,2081 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "tcb.h" +#include "cxgb3_offload.h" +#include "iwch.h" +#include "iwch_provider.h" +#include "iwch_cm.h" + +static char *states[] = { + "idle", + "listen", + "connecting", + "mpa_wait_req", + "mpa_req_sent", + "mpa_req_rcvd", + "mpa_rep_sent", + "fpdu_mode", + "aborting", + "closing", + "moribund", + "dead", + NULL, +}; + +static int ep_timeout_secs = 10; +module_param(ep_timeout_secs, int, 0444); +MODULE_PARM_DESC(ep_timeout_secs, "CM Endpoint operation timeout " + "in seconds (default=10)"); + +static int mpa_rev = 1; +module_param(mpa_rev, int, 0444); +MODULE_PARM_DESC(mpa_rev, "MPA Revision, 0 supports amso1100, " + "1 is spec compliant. (default=1)"); + +static int markers_enabled = 0; +module_param(markers_enabled, int, 0444); +MODULE_PARM_DESC(markers_enabled, "Enable MPA MARKERS (default(0)=disabled)"); + +static int crc_enabled = 1; +module_param(crc_enabled, int, 0444); +MODULE_PARM_DESC(crc_enabled, "Enable MPA CRC (default(1)=enabled)"); + +static int rcv_win = 256 * 1024; +module_param(rcv_win, int, 0444); +MODULE_PARM_DESC(rcv_win, "TCP receive window in bytes (default=256)"); + +static int snd_win = 32 * 1024; +module_param(snd_win, int, 0444); +MODULE_PARM_DESC(snd_win, "TCP send window in bytes (default=32KB)"); + +static unsigned int nocong = 0; +module_param(nocong, uint, 0444); +MODULE_PARM_DESC(nocong, "Turn off congestion control (default=0)"); + +static unsigned int cong_flavor = 1; +module_param(cong_flavor, uint, 0444); +MODULE_PARM_DESC(cong_flavor, "TCP Congestion control flavor (default=1)"); + +static void process_work(struct work_struct *work); +static struct workqueue_struct *workq; +static DECLARE_WORK(skb_work, process_work); + +static struct sk_buff_head rxq; +static cxgb3_cpl_handler_func work_handlers[NUM_CPL_CMDS]; + +static struct sk_buff *get_skb(struct sk_buff *skb, int len, gfp_t gfp); +static void ep_timeout(unsigned long arg); +static void connect_reply_upcall(struct iwch_ep *ep, int status); + +static void start_ep_timer(struct iwch_ep *ep) +{ + PDBG("%s ep %p\n", __FUNCTION__, ep); + if (timer_pending(&ep->timer)) { + PDBG("%s stopped / restarted timer ep %p\n", __FUNCTION__, ep); + del_timer_sync(&ep->timer); + } else + get_ep(&ep->com); + ep->timer.expires = jiffies + ep_timeout_secs * HZ; + ep->timer.data = (unsigned long)ep; + ep->timer.function = ep_timeout; + add_timer(&ep->timer); +} + +static void stop_ep_timer(struct iwch_ep *ep) +{ + PDBG("%s ep %p\n", __FUNCTION__, ep); + del_timer_sync(&ep->timer); + put_ep(&ep->com); +} + +static void release_tid(struct t3cdev *tdev, u32 hwtid, struct sk_buff *skb) +{ + struct cpl_tid_release *req; + + skb = get_skb(skb, sizeof *req, GFP_KERNEL); + if (!skb) + return; + req = (struct cpl_tid_release *) skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_TID_RELEASE, hwtid)); + skb->priority = CPL_PRIORITY_SETUP; + tdev->send(tdev, skb); + return; +} + +int iwch_quiesce_tid(struct iwch_ep *ep) +{ + struct cpl_set_tcb_field *req; + struct sk_buff *skb = get_skb(NULL, sizeof(*req), GFP_KERNEL); + + if (!skb) + return -ENOMEM; + req = (struct cpl_set_tcb_field *) skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + req->wr.wr_lo = htonl(V_WR_TID(ep->hwtid)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SET_TCB_FIELD, ep->hwtid)); + req->reply = 0; + req->cpu_idx = 0; + req->word = htons(W_TCB_RX_QUIESCE); + req->mask = cpu_to_be64(1ULL << S_TCB_RX_QUIESCE); + req->val = cpu_to_be64(1 << S_TCB_RX_QUIESCE); + + skb->priority = CPL_PRIORITY_DATA; + ep->com.tdev->send(ep->com.tdev, skb); + return 0; +} + +int iwch_resume_tid(struct iwch_ep *ep) +{ + struct cpl_set_tcb_field *req; + struct sk_buff *skb = get_skb(NULL, sizeof(*req), GFP_KERNEL); + + if (!skb) + return -ENOMEM; + req = (struct cpl_set_tcb_field *) skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + req->wr.wr_lo = htonl(V_WR_TID(ep->hwtid)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SET_TCB_FIELD, ep->hwtid)); + req->reply = 0; + req->cpu_idx = 0; + req->word = htons(W_TCB_RX_QUIESCE); + req->mask = cpu_to_be64(1ULL << S_TCB_RX_QUIESCE); + req->val = 0; + + skb->priority = CPL_PRIORITY_DATA; + ep->com.tdev->send(ep->com.tdev, skb); + return 0; +} + +static void set_emss(struct iwch_ep *ep, u16 opt) +{ + PDBG("%s ep %p opt %u\n", __FUNCTION__, ep, opt); + ep->emss = T3C_DATA(ep->com.tdev)->mtus[G_TCPOPT_MSS(opt)] - 40; + if (G_TCPOPT_TSTAMP(opt)) + ep->emss -= 12; + if (ep->emss < 128) + ep->emss = 128; + PDBG("emss=%d\n", ep->emss); +} + +static enum iwch_ep_state state_read(struct iwch_ep_common *epc) +{ + unsigned long flags; + enum iwch_ep_state state; + + spin_lock_irqsave(&epc->lock, flags); + state = epc->state; + spin_unlock_irqrestore(&epc->lock, flags); + return state; +} + +static inline void __state_set(struct iwch_ep_common *epc, + enum iwch_ep_state new) +{ + epc->state = new; +} + +static void state_set(struct iwch_ep_common *epc, enum iwch_ep_state new) +{ + unsigned long flags; + + spin_lock_irqsave(&epc->lock, flags); + PDBG("%s - %s -> %s\n", __FUNCTION__, states[epc->state], states[new]); + __state_set(epc, new); + spin_unlock_irqrestore(&epc->lock, flags); + return; +} + +static void *alloc_ep(int size, gfp_t gfp) +{ + struct iwch_ep_common *epc; + + epc = kmalloc(size, gfp); + if (epc) { + memset(epc, 0, size); + kref_init(&epc->kref); + spin_lock_init(&epc->lock); + init_waitqueue_head(&epc->waitq); + } + PDBG("%s alloc ep %p\n", __FUNCTION__, epc); + return epc; +} + +void __free_ep(struct kref *kref) +{ + struct iwch_ep_common *epc; + epc = container_of(kref, struct iwch_ep_common, kref); + PDBG("%s ep %p state %s\n", __FUNCTION__, epc, states[state_read(epc)]); + kfree(epc); +} + +static void release_ep_resources(struct iwch_ep *ep) +{ + PDBG("%s ep %p tid %d\n", __FUNCTION__, ep, ep->hwtid); + cxgb3_remove_tid(ep->com.tdev, (void *)ep, ep->hwtid); + dst_release(ep->dst); + l2t_release(L2DATA(ep->com.tdev), ep->l2t); + if (ep->com.tdev->type == T3B) + release_tid(ep->com.tdev, ep->hwtid, NULL); + put_ep(&ep->com); +} + +static void process_work(struct work_struct *work) +{ + struct sk_buff *skb = NULL; + void *ep; + struct t3cdev *tdev; + int ret; + + while ((skb = skb_dequeue(&rxq))) { + ep = *((void **) (skb->cb)); + tdev = *((struct t3cdev **) (skb->cb + sizeof(void *))); + ret = work_handlers[G_OPCODE(ntohl((__force __be32)skb->csum))](tdev, skb, ep); + if (ret & CPL_RET_BUF_DONE) + kfree_skb(skb); + + /* + * ep was referenced in sched(), and is freed here. + */ + put_ep((struct iwch_ep_common *)ep); + } +} + +static int status2errno(int status) +{ + switch (status) { + case CPL_ERR_NONE: + return 0; + case CPL_ERR_CONN_RESET: + return -ECONNRESET; + case CPL_ERR_ARP_MISS: + return -EHOSTUNREACH; + case CPL_ERR_CONN_TIMEDOUT: + return -ETIMEDOUT; + case CPL_ERR_TCAM_FULL: + return -ENOMEM; + case CPL_ERR_CONN_EXIST: + return -EADDRINUSE; + default: + return -EIO; + } +} + +/* + * Try and reuse skbs already allocated... + */ +static struct sk_buff *get_skb(struct sk_buff *skb, int len, gfp_t gfp) +{ + if (skb) { + BUG_ON(skb_cloned(skb)); + skb_trim(skb, 0); + skb_get(skb); + } else { + skb = alloc_skb(len, gfp); + } + return skb; +} + +static struct rtable *find_route(struct t3cdev *dev, __be32 local_ip, + __be32 peer_ip, __be16 local_port, + __be16 peer_port, u8 tos) +{ + struct rtable *rt; + struct flowi fl = { + .oif = 0, + .nl_u = { + .ip4_u = { + .daddr = peer_ip, + .saddr = local_ip, + .tos = tos} + }, + .proto = IPPROTO_TCP, + .uli_u = { + .ports = { + .sport = local_port, + .dport = peer_port} + } + }; + + if (ip_route_output_flow(&rt, &fl, NULL, 0)) + return NULL; + return rt; +} + +static unsigned int find_best_mtu(const struct t3c_data *d, unsigned short mtu) +{ + int i = 0; + + while (i < d->nmtus - 1 && d->mtus[i + 1] <= mtu) + ++i; + return i; +} + +static void arp_failure_discard(struct t3cdev *dev, struct sk_buff *skb) +{ + PDBG("%s t3cdev %p\n", __FUNCTION__, dev); + kfree_skb(skb); +} + +/* + * Handle an ARP failure for an active open. + */ +static void act_open_req_arp_failure(struct t3cdev *dev, struct sk_buff *skb) +{ + printk(KERN_ERR MOD "ARP failure duing connect\n"); + kfree_skb(skb); +} + +/* + * Handle an ARP failure for a CPL_ABORT_REQ. Change it into a no RST variant + * and send it along. + */ +static void abort_arp_failure(struct t3cdev *dev, struct sk_buff *skb) +{ + struct cpl_abort_req *req = cplhdr(skb); + + PDBG("%s t3cdev %p\n", __FUNCTION__, dev); + req->cmd = CPL_ABORT_NO_RST; + cxgb3_ofld_send(dev, skb); +} + +static int send_halfclose(struct iwch_ep *ep, gfp_t gfp) +{ + struct cpl_close_con_req *req; + struct sk_buff *skb; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + skb = get_skb(NULL, sizeof(*req), gfp); + if (!skb) { + printk(KERN_ERR MOD "%s - failed to alloc skb\n", __FUNCTION__); + return -ENOMEM; + } + skb->priority = CPL_PRIORITY_DATA; + set_arp_failure_handler(skb, arp_failure_discard); + req = (struct cpl_close_con_req *) skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_CLOSE_CON)); + req->wr.wr_lo = htonl(V_WR_TID(ep->hwtid)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_CLOSE_CON_REQ, ep->hwtid)); + l2t_send(ep->com.tdev, skb, ep->l2t); + return 0; +} + +static int send_abort(struct iwch_ep *ep, struct sk_buff *skb, gfp_t gfp) +{ + struct cpl_abort_req *req; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + skb = get_skb(skb, sizeof(*req), gfp); + if (!skb) { + printk(KERN_ERR MOD "%s - failed to alloc skb.\n", + __FUNCTION__); + return -ENOMEM; + } + skb->priority = CPL_PRIORITY_DATA; + set_arp_failure_handler(skb, abort_arp_failure); + req = (struct cpl_abort_req *) skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_HOST_ABORT_CON_REQ)); + req->wr.wr_lo = htonl(V_WR_TID(ep->hwtid)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_ABORT_REQ, ep->hwtid)); + req->cmd = CPL_ABORT_SEND_RST; + l2t_send(ep->com.tdev, skb, ep->l2t); + return 0; +} + +static int send_connect(struct iwch_ep *ep) +{ + struct cpl_act_open_req *req; + struct sk_buff *skb; + u32 opt0h, opt0l, opt2; + unsigned int mtu_idx; + int wscale; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + + skb = get_skb(NULL, sizeof(*req), GFP_KERNEL); + if (!skb) { + printk(KERN_ERR MOD "%s - failed to alloc skb.\n", + __FUNCTION__); + return -ENOMEM; + } + mtu_idx = find_best_mtu(T3C_DATA(ep->com.tdev), dst_mtu(ep->dst)); + wscale = compute_wscale(rcv_win); + opt0h = V_NAGLE(0) | + V_NO_CONG(nocong) | + V_KEEP_ALIVE(1) | + F_TCAM_BYPASS | + V_WND_SCALE(wscale) | + V_MSS_IDX(mtu_idx) | + V_L2T_IDX(ep->l2t->idx) | V_TX_CHANNEL(ep->l2t->smt_idx); + opt0l = V_TOS((ep->tos >> 2) & M_TOS) | V_RCV_BUFSIZ(rcv_win>>10); + opt2 = V_FLAVORS_VALID(1) | V_CONG_CONTROL_FLAVOR(cong_flavor); + skb->priority = CPL_PRIORITY_SETUP; + set_arp_failure_handler(skb, act_open_req_arp_failure); + + req = (struct cpl_act_open_req *) skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_ACT_OPEN_REQ, ep->atid)); + req->local_port = ep->com.local_addr.sin_port; + req->peer_port = ep->com.remote_addr.sin_port; + req->local_ip = ep->com.local_addr.sin_addr.s_addr; + req->peer_ip = ep->com.remote_addr.sin_addr.s_addr; + req->opt0h = htonl(opt0h); + req->opt0l = htonl(opt0l); + req->params = 0; + req->opt2 = htonl(opt2); + l2t_send(ep->com.tdev, skb, ep->l2t); + return 0; +} + +static void send_mpa_req(struct iwch_ep *ep, struct sk_buff *skb) +{ + int mpalen; + struct tx_data_wr *req; + struct mpa_message *mpa; + int len; + + PDBG("%s ep %p pd_len %d\n", __FUNCTION__, ep, ep->plen); + + BUG_ON(skb_cloned(skb)); + + mpalen = sizeof(*mpa) + ep->plen; + if (skb->data + mpalen + sizeof(*req) > skb->end) { + kfree_skb(skb); + skb=alloc_skb(mpalen + sizeof(*req), GFP_KERNEL); + if (!skb) { + connect_reply_upcall(ep, -ENOMEM); + return; + } + } + skb_trim(skb, 0); + skb_reserve(skb, sizeof(*req)); + skb_put(skb, mpalen); + skb->priority = CPL_PRIORITY_DATA; + mpa = (struct mpa_message *) skb->data; + memset(mpa, 0, sizeof(*mpa)); + memcpy(mpa->key, MPA_KEY_REQ, sizeof(mpa->key)); + mpa->flags = (crc_enabled ? MPA_CRC : 0) | + (markers_enabled ? MPA_MARKERS : 0); + mpa->private_data_size = htons(ep->plen); + mpa->revision = mpa_rev; + + if (ep->plen) + memcpy(mpa->private_data, ep->mpa_pkt + sizeof(*mpa), ep->plen); + + /* + * Reference the mpa skb. This ensures the data area + * will remain in memory until the hw acks the tx. + * Function tx_ack() will deref it. + */ + skb_get(skb); + set_arp_failure_handler(skb, arp_failure_discard); + skb->h.raw = skb->data; + len = skb->len; + req = (struct tx_data_wr *) skb_push(skb, sizeof(*req)); + req->wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_TX_DATA)); + req->wr_lo = htonl(V_WR_TID(ep->hwtid)); + req->len = htonl(len); + req->param = htonl(V_TX_PORT(ep->l2t->smt_idx) | + V_TX_SNDBUF(snd_win>>15)); + req->flags = htonl(F_TX_IMM_ACK|F_TX_INIT); + req->sndseq = htonl(ep->snd_seq); + BUG_ON(ep->mpa_skb); + ep->mpa_skb = skb; + l2t_send(ep->com.tdev, skb, ep->l2t); + start_ep_timer(ep); + state_set(&ep->com, MPA_REQ_SENT); + return; +} + +static int send_mpa_reject(struct iwch_ep *ep, const void *pdata, u8 plen) +{ + int mpalen; + struct tx_data_wr *req; + struct mpa_message *mpa; + struct sk_buff *skb; + + PDBG("%s ep %p plen %d\n", __FUNCTION__, ep, plen); + + mpalen = sizeof(*mpa) + plen; + + skb = get_skb(NULL, mpalen + sizeof(*req), GFP_KERNEL); + if (!skb) { + printk(KERN_ERR MOD "%s - cannot alloc skb!\n", __FUNCTION__); + return -ENOMEM; + } + skb_reserve(skb, sizeof(*req)); + mpa = (struct mpa_message *) skb_put(skb, mpalen); + memset(mpa, 0, sizeof(*mpa)); + memcpy(mpa->key, MPA_KEY_REP, sizeof(mpa->key)); + mpa->flags = MPA_REJECT; + mpa->revision = mpa_rev; + mpa->private_data_size = htons(plen); + if (plen) + memcpy(mpa->private_data, pdata, plen); + + /* + * Reference the mpa skb again. This ensures the data area + * will remain in memory until the hw acks the tx. + * Function tx_ack() will deref it. + */ + skb_get(skb); + skb->priority = CPL_PRIORITY_DATA; + set_arp_failure_handler(skb, arp_failure_discard); + skb->h.raw = skb->data; + req = (struct tx_data_wr *) skb_push(skb, sizeof(*req)); + req->wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_TX_DATA)); + req->wr_lo = htonl(V_WR_TID(ep->hwtid)); + req->len = htonl(mpalen); + req->param = htonl(V_TX_PORT(ep->l2t->smt_idx) | + V_TX_SNDBUF(snd_win>>15)); + req->flags = htonl(F_TX_IMM_ACK|F_TX_INIT); + req->sndseq = htonl(ep->snd_seq); + BUG_ON(ep->mpa_skb); + ep->mpa_skb = skb; + l2t_send(ep->com.tdev, skb, ep->l2t); + return 0; +} + +static int send_mpa_reply(struct iwch_ep *ep, const void *pdata, u8 plen) +{ + int mpalen; + struct tx_data_wr *req; + struct mpa_message *mpa; + int len; + struct sk_buff *skb; + + PDBG("%s ep %p plen %d\n", __FUNCTION__, ep, plen); + + mpalen = sizeof(*mpa) + plen; + + skb = get_skb(NULL, mpalen + sizeof(*req), GFP_KERNEL); + if (!skb) { + printk(KERN_ERR MOD "%s - cannot alloc skb!\n", __FUNCTION__); + return -ENOMEM; + } + skb->priority = CPL_PRIORITY_DATA; + skb_reserve(skb, sizeof(*req)); + mpa = (struct mpa_message *) skb_put(skb, mpalen); + memset(mpa, 0, sizeof(*mpa)); + memcpy(mpa->key, MPA_KEY_REP, sizeof(mpa->key)); + mpa->flags = (ep->mpa_attr.crc_enabled ? MPA_CRC : 0) | + (markers_enabled ? MPA_MARKERS : 0); + mpa->revision = mpa_rev; + mpa->private_data_size = htons(plen); + if (plen) + memcpy(mpa->private_data, pdata, plen); + + /* + * Reference the mpa skb. This ensures the data area + * will remain in memory until the hw acks the tx. + * Function tx_ack() will deref it. + */ + skb_get(skb); + set_arp_failure_handler(skb, arp_failure_discard); + skb->h.raw = skb->data; + len = skb->len; + req = (struct tx_data_wr *) skb_push(skb, sizeof(*req)); + req->wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_TX_DATA)); + req->wr_lo = htonl(V_WR_TID(ep->hwtid)); + req->len = htonl(len); + req->param = htonl(V_TX_PORT(ep->l2t->smt_idx) | + V_TX_SNDBUF(snd_win>>15)); + req->flags = htonl(F_TX_MORE | F_TX_IMM_ACK | F_TX_INIT); + req->sndseq = htonl(ep->snd_seq); + ep->mpa_skb = skb; + state_set(&ep->com, MPA_REP_SENT); + l2t_send(ep->com.tdev, skb, ep->l2t); + return 0; +} + +static int act_establish(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) +{ + struct iwch_ep *ep = ctx; + struct cpl_act_establish *req = cplhdr(skb); + unsigned int tid = GET_TID(req); + + PDBG("%s ep %p tid %d\n", __FUNCTION__, ep, tid); + + dst_confirm(ep->dst); + + /* setup the hwtid for this connection */ + ep->hwtid = tid; + cxgb3_insert_tid(ep->com.tdev, &t3c_client, ep, tid); + + ep->snd_seq = ntohl(req->snd_isn); + + set_emss(ep, ntohs(req->tcp_opt)); + + /* dealloc the atid */ + cxgb3_free_atid(ep->com.tdev, ep->atid); + + /* start MPA negotiation */ + send_mpa_req(ep, skb); + + return 0; +} + +static void abort_connection(struct iwch_ep *ep, struct sk_buff *skb, gfp_t gfp) +{ + PDBG("%s ep %p\n", __FILE__, ep); + state_set(&ep->com, ABORTING); + send_abort(ep, skb, gfp); +} + +static void close_complete_upcall(struct iwch_ep *ep) +{ + struct iw_cm_event event; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + memset(&event, 0, sizeof(event)); + event.event = IW_CM_EVENT_CLOSE; + if (ep->com.cm_id) { + PDBG("close complete delivered ep %p cm_id %p tid %d\n", + ep, ep->com.cm_id, ep->hwtid); + ep->com.cm_id->event_handler(ep->com.cm_id, &event); + ep->com.cm_id->rem_ref(ep->com.cm_id); + ep->com.cm_id = NULL; + ep->com.qp = NULL; + } +} + +static void peer_close_upcall(struct iwch_ep *ep) +{ + struct iw_cm_event event; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + memset(&event, 0, sizeof(event)); + event.event = IW_CM_EVENT_DISCONNECT; + if (ep->com.cm_id) { + PDBG("peer close delivered ep %p cm_id %p tid %d\n", + ep, ep->com.cm_id, ep->hwtid); + ep->com.cm_id->event_handler(ep->com.cm_id, &event); + } +} + +static void peer_abort_upcall(struct iwch_ep *ep) +{ + struct iw_cm_event event; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + memset(&event, 0, sizeof(event)); + event.event = IW_CM_EVENT_CLOSE; + event.status = -ECONNRESET; + if (ep->com.cm_id) { + PDBG("abort delivered ep %p cm_id %p tid %d\n", ep, + ep->com.cm_id, ep->hwtid); + ep->com.cm_id->event_handler(ep->com.cm_id, &event); + ep->com.cm_id->rem_ref(ep->com.cm_id); + ep->com.cm_id = NULL; + ep->com.qp = NULL; + } +} + +static void connect_reply_upcall(struct iwch_ep *ep, int status) +{ + struct iw_cm_event event; + + PDBG("%s ep %p status %d\n", __FUNCTION__, ep, status); + memset(&event, 0, sizeof(event)); + event.event = IW_CM_EVENT_CONNECT_REPLY; + event.status = status; + event.local_addr = ep->com.local_addr; + event.remote_addr = ep->com.remote_addr; + + if ((status == 0) || (status == -ECONNREFUSED)) { + event.private_data_len = ep->plen; + event.private_data = ep->mpa_pkt + sizeof(struct mpa_message); + } + if (ep->com.cm_id) { + PDBG("%s ep %p tid %d status %d\n", __FUNCTION__, ep, + ep->hwtid, status); + ep->com.cm_id->event_handler(ep->com.cm_id, &event); + } + if (status < 0) { + ep->com.cm_id->rem_ref(ep->com.cm_id); + ep->com.cm_id = NULL; + ep->com.qp = NULL; + } +} + +static void connect_request_upcall(struct iwch_ep *ep) +{ + struct iw_cm_event event; + + PDBG("%s ep %p tid %d\n", __FUNCTION__, ep, ep->hwtid); + memset(&event, 0, sizeof(event)); + event.event = IW_CM_EVENT_CONNECT_REQUEST; + event.local_addr = ep->com.local_addr; + event.remote_addr = ep->com.remote_addr; + event.private_data_len = ep->plen; + event.private_data = ep->mpa_pkt + sizeof(struct mpa_message); + event.provider_data = ep; + if (state_read(&ep->parent_ep->com) != DEAD) + ep->parent_ep->com.cm_id->event_handler( + ep->parent_ep->com.cm_id, + &event); + put_ep(&ep->parent_ep->com); + ep->parent_ep = NULL; +} + +static void established_upcall(struct iwch_ep *ep) +{ + struct iw_cm_event event; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + memset(&event, 0, sizeof(event)); + event.event = IW_CM_EVENT_ESTABLISHED; + if (ep->com.cm_id) { + PDBG("%s ep %p tid %d\n", __FUNCTION__, ep, ep->hwtid); + ep->com.cm_id->event_handler(ep->com.cm_id, &event); + } +} + +static int update_rx_credits(struct iwch_ep *ep, u32 credits) +{ + struct cpl_rx_data_ack *req; + struct sk_buff *skb; + + PDBG("%s ep %p credits %u\n", __FUNCTION__, ep, credits); + skb = get_skb(NULL, sizeof(*req), GFP_KERNEL); + if (!skb) { + printk(KERN_ERR MOD "update_rx_credits - cannot alloc skb!\n"); + return 0; + } + + req = (struct cpl_rx_data_ack *) skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_RX_DATA_ACK, ep->hwtid)); + req->credit_dack = htonl(V_RX_CREDITS(credits) | V_RX_FORCE_ACK(1)); + skb->priority = CPL_PRIORITY_ACK; + ep->com.tdev->send(ep->com.tdev, skb); + return credits; +} + +static void process_mpa_reply(struct iwch_ep *ep, struct sk_buff *skb) +{ + struct mpa_message *mpa; + u16 plen; + struct iwch_qp_attributes attrs; + enum iwch_qp_attr_mask mask; + int err; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + + /* + * Stop mpa timer. If it expired, then the state has + * changed and we bail since ep_timeout already aborted + * the connection. + */ + stop_ep_timer(ep); + if (state_read(&ep->com) != MPA_REQ_SENT) + return; + + /* + * If we get more than the supported amount of private data + * then we must fail this connection. + */ + if (ep->mpa_pkt_len + skb->len > sizeof(ep->mpa_pkt)) { + err = -EINVAL; + goto err; + } + + /* + * copy the new data into our accumulation buffer. + */ + memcpy(&(ep->mpa_pkt[ep->mpa_pkt_len]), skb->data, skb->len); + ep->mpa_pkt_len += skb->len; + + /* + * if we don't even have the mpa message, then bail. + */ + if (ep->mpa_pkt_len < sizeof(*mpa)) + return; + mpa = (struct mpa_message *) ep->mpa_pkt; + + /* Validate MPA header. */ + if (mpa->revision != mpa_rev) { + err = -EPROTO; + goto err; + } + if (memcmp(mpa->key, MPA_KEY_REP, sizeof(mpa->key))) { + err = -EPROTO; + goto err; + } + + plen = ntohs(mpa->private_data_size); + + /* + * Fail if there's too much private data. + */ + if (plen > MPA_MAX_PRIVATE_DATA) { + err = -EPROTO; + goto err; + } + + /* + * If plen does not account for pkt size + */ + if (ep->mpa_pkt_len > (sizeof(*mpa) + plen)) { + err = -EPROTO; + goto err; + } + + ep->plen = (u8) plen; + + /* + * If we don't have all the pdata yet, then bail. + * We'll continue process when more data arrives. + */ + if (ep->mpa_pkt_len < (sizeof(*mpa) + plen)) + return; + + if (mpa->flags & MPA_REJECT) { + err = -ECONNREFUSED; + goto err; + } + + /* + * If we get here we have accumulated the entire mpa + * start reply message including private data. And + * the MPA header is valid. + */ + state_set(&ep->com, FPDU_MODE); + ep->mpa_attr.crc_enabled = (mpa->flags & MPA_CRC) | crc_enabled ? 1 : 0; + ep->mpa_attr.recv_marker_enabled = markers_enabled; + ep->mpa_attr.xmit_marker_enabled = mpa->flags & MPA_MARKERS ? 1 : 0; + ep->mpa_attr.version = mpa_rev; + PDBG("%s - crc_enabled=%d, recv_marker_enabled=%d, " + "xmit_marker_enabled=%d, version=%d\n", __FUNCTION__, + ep->mpa_attr.crc_enabled, ep->mpa_attr.recv_marker_enabled, + ep->mpa_attr.xmit_marker_enabled, ep->mpa_attr.version); + + attrs.mpa_attr = ep->mpa_attr; + attrs.max_ird = ep->ird; + attrs.max_ord = ep->ord; + attrs.llp_stream_handle = ep; + attrs.next_state = IWCH_QP_STATE_RTS; + + mask = IWCH_QP_ATTR_NEXT_STATE | + IWCH_QP_ATTR_LLP_STREAM_HANDLE | IWCH_QP_ATTR_MPA_ATTR | + IWCH_QP_ATTR_MAX_IRD | IWCH_QP_ATTR_MAX_ORD; + + /* bind QP and TID with INIT_WR */ + err = iwch_modify_qp(ep->com.qp->rhp, + ep->com.qp, mask, &attrs, 1); + if (!err) + goto out; +err: + abort_connection(ep, skb, GFP_KERNEL); +out: + connect_reply_upcall(ep, err); + return; +} + +static void process_mpa_request(struct iwch_ep *ep, struct sk_buff *skb) +{ + struct mpa_message *mpa; + u16 plen; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + + /* + * Stop mpa timer. If it expired, then the state has + * changed and we bail since ep_timeout already aborted + * the connection. + */ + stop_ep_timer(ep); + if (state_read(&ep->com) != MPA_REQ_WAIT) + return; + + /* + * If we get more than the supported amount of private data + * then we must fail this connection. + */ + if (ep->mpa_pkt_len + skb->len > sizeof(ep->mpa_pkt)) { + abort_connection(ep, skb, GFP_KERNEL); + return; + } + + PDBG("%s enter (%s line %u)\n", __FUNCTION__, __FILE__, __LINE__); + + /* + * Copy the new data into our accumulation buffer. + */ + memcpy(&(ep->mpa_pkt[ep->mpa_pkt_len]), skb->data, skb->len); + ep->mpa_pkt_len += skb->len; + + /* + * If we don't even have the mpa message, then bail. + * We'll continue process when more data arrives. + */ + if (ep->mpa_pkt_len < sizeof(*mpa)) + return; + PDBG("%s enter (%s line %u)\n", __FUNCTION__, __FILE__, __LINE__); + mpa = (struct mpa_message *) ep->mpa_pkt; + + /* + * Validate MPA Header. + */ + if (mpa->revision != mpa_rev) { + abort_connection(ep, skb, GFP_KERNEL); + return; + } + + if (memcmp(mpa->key, MPA_KEY_REQ, sizeof(mpa->key))) { + abort_connection(ep, skb, GFP_KERNEL); + return; + } + + plen = ntohs(mpa->private_data_size); + + /* + * Fail if there's too much private data. + */ + if (plen > MPA_MAX_PRIVATE_DATA) { + abort_connection(ep, skb, GFP_KERNEL); + return; + } + + /* + * If plen does not account for pkt size + */ + if (ep->mpa_pkt_len > (sizeof(*mpa) + plen)) { + abort_connection(ep, skb, GFP_KERNEL); + return; + } + ep->plen = (u8) plen; + + /* + * If we don't have all the pdata yet, then bail. + */ + if (ep->mpa_pkt_len < (sizeof(*mpa) + plen)) + return; + + /* + * If we get here we have accumulated the entire mpa + * start reply message including private data. + */ + ep->mpa_attr.crc_enabled = (mpa->flags & MPA_CRC) | crc_enabled ? 1 : 0; + ep->mpa_attr.recv_marker_enabled = markers_enabled; + ep->mpa_attr.xmit_marker_enabled = mpa->flags & MPA_MARKERS ? 1 : 0; + ep->mpa_attr.version = mpa_rev; + PDBG("%s - crc_enabled=%d, recv_marker_enabled=%d, " + "xmit_marker_enabled=%d, version=%d\n", __FUNCTION__, + ep->mpa_attr.crc_enabled, ep->mpa_attr.recv_marker_enabled, + ep->mpa_attr.xmit_marker_enabled, ep->mpa_attr.version); + + state_set(&ep->com, MPA_REQ_RCVD); + + /* drive upcall */ + connect_request_upcall(ep); + return; +} + +static int rx_data(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) +{ + struct iwch_ep *ep = ctx; + struct cpl_rx_data *hdr = cplhdr(skb); + unsigned int dlen = ntohs(hdr->len); + + PDBG("%s ep %p dlen %u\n", __FUNCTION__, ep, dlen); + + skb_pull(skb, sizeof(*hdr)); + skb_trim(skb, dlen); + + switch (state_read(&ep->com)) { + case MPA_REQ_SENT: + process_mpa_reply(ep, skb); + break; + case MPA_REQ_WAIT: + process_mpa_request(ep, skb); + break; + case MPA_REP_SENT: + break; + default: + printk(KERN_ERR MOD "%s Unexpected streaming data." + " ep %p state %d tid %d\n", + __FUNCTION__, ep, state_read(&ep->com), ep->hwtid); + + /* + * The ep will timeout and inform the ULP of the failure. + * See ep_timeout(). + */ + break; + } + + /* update RX credits */ + update_rx_credits(ep, dlen); + + return CPL_RET_BUF_DONE; +} + +/* + * Upcall from the adapter indicating data has been transmitted. + * For us its just the single MPA request or reply. We can now free + * the skb holding the mpa message. + */ +static int tx_ack(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) +{ + struct iwch_ep *ep = ctx; + struct cpl_wr_ack *hdr = cplhdr(skb); + unsigned int credits = ntohs(hdr->credits); + enum iwch_qp_attr_mask mask; + + PDBG("%s ep %p credits %u\n", __FUNCTION__, ep, credits); + + if (credits == 0) + return CPL_RET_BUF_DONE; + BUG_ON(credits != 1); + BUG_ON(ep->mpa_skb == NULL); + kfree_skb(ep->mpa_skb); + ep->mpa_skb = NULL; + dst_confirm(ep->dst); + if (state_read(&ep->com) == MPA_REP_SENT) { + struct iwch_qp_attributes attrs; + + /* bind QP to EP and move to RTS */ + attrs.mpa_attr = ep->mpa_attr; + attrs.max_ird = ep->ord; + attrs.max_ord = ep->ord; + attrs.llp_stream_handle = ep; + attrs.next_state = IWCH_QP_STATE_RTS; + + /* bind QP and TID with INIT_WR */ + mask = IWCH_QP_ATTR_NEXT_STATE | + IWCH_QP_ATTR_LLP_STREAM_HANDLE | + IWCH_QP_ATTR_MPA_ATTR | + IWCH_QP_ATTR_MAX_IRD | + IWCH_QP_ATTR_MAX_ORD; + + ep->com.rpl_err = iwch_modify_qp(ep->com.qp->rhp, + ep->com.qp, mask, &attrs, 1); + + if (!ep->com.rpl_err) { + state_set(&ep->com, FPDU_MODE); + established_upcall(ep); + } + + ep->com.rpl_done = 1; + PDBG("waking up ep %p\n", ep); + wake_up(&ep->com.waitq); + } + return CPL_RET_BUF_DONE; +} + +static int abort_rpl(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) +{ + struct iwch_ep *ep = ctx; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + + close_complete_upcall(ep); + state_set(&ep->com, DEAD); + release_ep_resources(ep); + return CPL_RET_BUF_DONE; +} + +static int act_open_rpl(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) +{ + struct iwch_ep *ep = ctx; + struct cpl_act_open_rpl *rpl = cplhdr(skb); + + PDBG("%s ep %p status %u errno %d\n", __FUNCTION__, ep, rpl->status, + status2errno(rpl->status)); + connect_reply_upcall(ep, status2errno(rpl->status)); + state_set(&ep->com, DEAD); + if (ep->com.tdev->type == T3B) + release_tid(ep->com.tdev, GET_TID(rpl), NULL); + cxgb3_free_atid(ep->com.tdev, ep->atid); + dst_release(ep->dst); + l2t_release(L2DATA(ep->com.tdev), ep->l2t); + put_ep(&ep->com); + return CPL_RET_BUF_DONE; +} + +static int listen_start(struct iwch_listen_ep *ep) +{ + struct sk_buff *skb; + struct cpl_pass_open_req *req; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + skb = get_skb(NULL, sizeof(*req), GFP_KERNEL); + if (!skb) { + printk(KERN_ERR MOD "t3c_listen_start failed to alloc skb!\n"); + return -ENOMEM; + } + + req = (struct cpl_pass_open_req *) skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_PASS_OPEN_REQ, ep->stid)); + req->local_port = ep->com.local_addr.sin_port; + req->local_ip = ep->com.local_addr.sin_addr.s_addr; + req->peer_port = 0; + req->peer_ip = 0; + req->peer_netmask = 0; + req->opt0h = htonl(F_DELACK | F_TCAM_BYPASS); + req->opt0l = htonl(V_RCV_BUFSIZ(rcv_win>>10)); + req->opt1 = htonl(V_CONN_POLICY(CPL_CONN_POLICY_ASK)); + + skb->priority = 1; + ep->com.tdev->send(ep->com.tdev, skb); + return 0; +} + +static int pass_open_rpl(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) +{ + struct iwch_listen_ep *ep = ctx; + struct cpl_pass_open_rpl *rpl = cplhdr(skb); + + PDBG("%s ep %p status %d error %d\n", __FUNCTION__, ep, + rpl->status, status2errno(rpl->status)); + ep->com.rpl_err = status2errno(rpl->status); + ep->com.rpl_done = 1; + wake_up(&ep->com.waitq); + + return CPL_RET_BUF_DONE; +} + +static int listen_stop(struct iwch_listen_ep *ep) +{ + struct sk_buff *skb; + struct cpl_close_listserv_req *req; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + skb = get_skb(NULL, sizeof(*req), GFP_KERNEL); + if (!skb) { + printk(KERN_ERR MOD "%s - failed to alloc skb\n", __FUNCTION__); + return -ENOMEM; + } + req = (struct cpl_close_listserv_req *) skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_CLOSE_LISTSRV_REQ, ep->stid)); + skb->priority = 1; + ep->com.tdev->send(ep->com.tdev, skb); + return 0; +} + +static int close_listsrv_rpl(struct t3cdev *tdev, struct sk_buff *skb, + void *ctx) +{ + struct iwch_listen_ep *ep = ctx; + struct cpl_close_listserv_rpl *rpl = cplhdr(skb); + + PDBG("%s ep %p\n", __FUNCTION__, ep); + ep->com.rpl_err = status2errno(rpl->status); + ep->com.rpl_done = 1; + wake_up(&ep->com.waitq); + return CPL_RET_BUF_DONE; +} + +static void accept_cr(struct iwch_ep *ep, __be32 peer_ip, struct sk_buff *skb) +{ + struct cpl_pass_accept_rpl *rpl; + unsigned int mtu_idx; + u32 opt0h, opt0l, opt2; + int wscale; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + BUG_ON(skb_cloned(skb)); + skb_trim(skb, sizeof(*rpl)); + skb_get(skb); + mtu_idx = find_best_mtu(T3C_DATA(ep->com.tdev), dst_mtu(ep->dst)); + wscale = compute_wscale(rcv_win); + opt0h = V_NAGLE(0) | + V_NO_CONG(nocong) | + V_KEEP_ALIVE(1) | + F_TCAM_BYPASS | + V_WND_SCALE(wscale) | + V_MSS_IDX(mtu_idx) | + V_L2T_IDX(ep->l2t->idx) | V_TX_CHANNEL(ep->l2t->smt_idx); + opt0l = V_TOS((ep->tos >> 2) & M_TOS) | V_RCV_BUFSIZ(rcv_win>>10); + opt2 = V_FLAVORS_VALID(1) | V_CONG_CONTROL_FLAVOR(cong_flavor); + + rpl = cplhdr(skb); + rpl->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(rpl) = htonl(MK_OPCODE_TID(CPL_PASS_ACCEPT_RPL, ep->hwtid)); + rpl->peer_ip = peer_ip; + rpl->opt0h = htonl(opt0h); + rpl->opt0l_status = htonl(opt0l | CPL_PASS_OPEN_ACCEPT); + rpl->opt2 = htonl(opt2); + rpl->rsvd = rpl->opt2; /* workaround for HW bug */ + skb->priority = CPL_PRIORITY_SETUP; + l2t_send(ep->com.tdev, skb, ep->l2t); + + return; +} + +static void reject_cr(struct t3cdev *tdev, u32 hwtid, __be32 peer_ip, + struct sk_buff *skb) +{ + PDBG("%s t3cdev %p tid %u peer_ip %x\n", __FUNCTION__, tdev, hwtid, + peer_ip); + BUG_ON(skb_cloned(skb)); + skb_trim(skb, sizeof(struct cpl_tid_release)); + skb_get(skb); + + if (tdev->type == T3B) + release_tid(tdev, hwtid, skb); + else { + struct cpl_pass_accept_rpl *rpl; + + rpl = cplhdr(skb); + skb->priority = CPL_PRIORITY_SETUP; + rpl->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(rpl) = htonl(MK_OPCODE_TID(CPL_PASS_ACCEPT_RPL, + hwtid)); + rpl->peer_ip = peer_ip; + rpl->opt0h = htonl(F_TCAM_BYPASS); + rpl->opt0l_status = htonl(CPL_PASS_OPEN_REJECT); + rpl->opt2 = 0; + rpl->rsvd = rpl->opt2; + tdev->send(tdev, skb); + } +} + +static int pass_accept_req(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) +{ + struct iwch_ep *child_ep, *parent_ep = ctx; + struct cpl_pass_accept_req *req = cplhdr(skb); + unsigned int hwtid = GET_TID(req); + struct dst_entry *dst; + struct l2t_entry *l2t; + struct rtable *rt; + struct iff_mac tim; + + PDBG("%s parent ep %p tid %u\n", __FUNCTION__, parent_ep, hwtid); + + if (state_read(&parent_ep->com) != LISTEN) { + printk(KERN_ERR "%s - listening ep not in LISTEN\n", + __FUNCTION__); + goto reject; + } + + /* + * Find the netdev for this connection request. + */ + tim.mac_addr = req->dst_mac; + tim.vlan_tag = ntohs(req->vlan_tag); + if (tdev->ctl(tdev, GET_IFF_FROM_MAC, &tim) < 0 || !tim.dev) { + printk(KERN_ERR + "%s bad dst mac %02x %02x %02x %02x %02x %02x\n", + __FUNCTION__, + req->dst_mac[0], + req->dst_mac[1], + req->dst_mac[2], + req->dst_mac[3], + req->dst_mac[4], + req->dst_mac[5]); + goto reject; + } + + /* Find output route */ + rt = find_route(tdev, + req->local_ip, + req->peer_ip, + req->local_port, + req->peer_port, G_PASS_OPEN_TOS(ntohl(req->tos_tid))); + if (!rt) { + printk(KERN_ERR MOD "%s - failed to find dst entry!\n", + __FUNCTION__); + goto reject; + } + dst = &rt->u.dst; + l2t = t3_l2t_get(tdev, dst->neighbour, dst->neighbour->dev); + if (!l2t) { + printk(KERN_ERR MOD "%s - failed to allocate l2t entry!\n", + __FUNCTION__); + dst_release(dst); + goto reject; + } + child_ep = alloc_ep(sizeof(*child_ep), GFP_KERNEL); + if (!child_ep) { + printk(KERN_ERR MOD "%s - failed to allocate ep entry!\n", + __FUNCTION__); + l2t_release(L2DATA(tdev), l2t); + dst_release(dst); + goto reject; + } + state_set(&child_ep->com, CONNECTING); + child_ep->com.tdev = tdev; + child_ep->com.cm_id = NULL; + child_ep->com.local_addr.sin_family = PF_INET; + child_ep->com.local_addr.sin_port = req->local_port; + child_ep->com.local_addr.sin_addr.s_addr = req->local_ip; + child_ep->com.remote_addr.sin_family = PF_INET; + child_ep->com.remote_addr.sin_port = req->peer_port; + child_ep->com.remote_addr.sin_addr.s_addr = req->peer_ip; + get_ep(&parent_ep->com); + child_ep->parent_ep = parent_ep; + child_ep->tos = G_PASS_OPEN_TOS(ntohl(req->tos_tid)); + child_ep->l2t = l2t; + child_ep->dst = dst; + child_ep->hwtid = hwtid; + init_timer(&child_ep->timer); + cxgb3_insert_tid(tdev, &t3c_client, child_ep, hwtid); + accept_cr(child_ep, req->peer_ip, skb); + goto out; +reject: + reject_cr(tdev, hwtid, req->peer_ip, skb); +out: + return CPL_RET_BUF_DONE; +} + +static int pass_establish(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) +{ + struct iwch_ep *ep = ctx; + struct cpl_pass_establish *req = cplhdr(skb); + + PDBG("%s ep %p\n", __FUNCTION__, ep); + ep->snd_seq = ntohl(req->snd_isn); + + set_emss(ep, ntohs(req->tcp_opt)); + + dst_confirm(ep->dst); + state_set(&ep->com, MPA_REQ_WAIT); + start_ep_timer(ep); + + return CPL_RET_BUF_DONE; +} + +static int peer_close(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) +{ + struct iwch_ep *ep = ctx; + struct iwch_qp_attributes attrs; + unsigned long flags; + int disconnect = 1; + int release = 0; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + dst_confirm(ep->dst); + + spin_lock_irqsave(&ep->com.lock, flags); + switch (ep->com.state) { + case MPA_REQ_WAIT: + __state_set(&ep->com, CLOSING); + break; + case MPA_REQ_SENT: + __state_set(&ep->com, CLOSING); + connect_reply_upcall(ep, -ECONNRESET); + break; + case MPA_REQ_RCVD: + + /* + * We're gonna mark this puppy DEAD, but keep + * the reference on it until the ULP accepts or + * rejects the CR. + */ + __state_set(&ep->com, CLOSING); + get_ep(&ep->com); + break; + case MPA_REP_SENT: + __state_set(&ep->com, CLOSING); + ep->com.rpl_done = 1; + ep->com.rpl_err = -ECONNRESET; + PDBG("waking up ep %p\n", ep); + wake_up(&ep->com.waitq); + break; + case FPDU_MODE: + __state_set(&ep->com, CLOSING); + attrs.next_state = IWCH_QP_STATE_CLOSING; + iwch_modify_qp(ep->com.qp->rhp, ep->com.qp, + IWCH_QP_ATTR_NEXT_STATE, &attrs, 1); + peer_close_upcall(ep); + break; + case ABORTING: + disconnect = 0; + break; + case CLOSING: + start_ep_timer(ep); + __state_set(&ep->com, MORIBUND); + disconnect = 0; + break; + case MORIBUND: + stop_ep_timer(ep); + if (ep->com.cm_id && ep->com.qp) { + attrs.next_state = IWCH_QP_STATE_IDLE; + iwch_modify_qp(ep->com.qp->rhp, ep->com.qp, + IWCH_QP_ATTR_NEXT_STATE, &attrs, 1); + } + close_complete_upcall(ep); + __state_set(&ep->com, DEAD); + release = 1; + disconnect = 0; + break; + case DEAD: + disconnect = 0; + break; + default: + BUG_ON(1); + } + spin_unlock_irqrestore(&ep->com.lock, flags); + if (disconnect) + iwch_ep_disconnect(ep, 0, GFP_KERNEL); + if (release) + release_ep_resources(ep); + return CPL_RET_BUF_DONE; +} + +/* + * Returns whether an ABORT_REQ_RSS message is a negative advice. + */ +static inline int is_neg_adv_abort(unsigned int status) +{ + return status == CPL_ERR_RTX_NEG_ADVICE || + status == CPL_ERR_PERSIST_NEG_ADVICE; +} + +static int peer_abort(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) +{ + struct cpl_abort_req_rss *req = cplhdr(skb); + struct iwch_ep *ep = ctx; + struct cpl_abort_rpl *rpl; + struct sk_buff *rpl_skb; + struct iwch_qp_attributes attrs; + int ret; + int state; + + if (is_neg_adv_abort(req->status)) { + PDBG("%s neg_adv_abort ep %p tid %d\n", __FUNCTION__, ep, + ep->hwtid); + t3_l2t_send_event(ep->com.tdev, ep->l2t); + return CPL_RET_BUF_DONE; + } + + state = state_read(&ep->com); + PDBG("%s ep %p state %u\n", __FUNCTION__, ep, state); + switch (state) { + case CONNECTING: + break; + case MPA_REQ_WAIT: + break; + case MPA_REQ_SENT: + connect_reply_upcall(ep, -ECONNRESET); + break; + case MPA_REP_SENT: + ep->com.rpl_done = 1; + ep->com.rpl_err = -ECONNRESET; + PDBG("waking up ep %p\n", ep); + wake_up(&ep->com.waitq); + break; + case MPA_REQ_RCVD: + + /* + * We're gonna mark this puppy DEAD, but keep + * the reference on it until the ULP accepts or + * rejects the CR. + */ + get_ep(&ep->com); + break; + case MORIBUND: + stop_ep_timer(ep); + case FPDU_MODE: + case CLOSING: + if (ep->com.cm_id && ep->com.qp) { + attrs.next_state = IWCH_QP_STATE_ERROR; + ret = iwch_modify_qp(ep->com.qp->rhp, + ep->com.qp, IWCH_QP_ATTR_NEXT_STATE, + &attrs, 1); + if (ret) + printk(KERN_ERR MOD + "%s - qp <- error failed!\n", + __FUNCTION__); + } + peer_abort_upcall(ep); + break; + case ABORTING: + break; + case DEAD: + PDBG("%s PEER_ABORT IN DEAD STATE!!!!\n", __FUNCTION__); + return CPL_RET_BUF_DONE; + default: + BUG_ON(1); + break; + } + dst_confirm(ep->dst); + + rpl_skb = get_skb(skb, sizeof(*rpl), GFP_KERNEL); + if (!rpl_skb) { + printk(KERN_ERR MOD "%s - cannot allocate skb!\n", + __FUNCTION__); + dst_release(ep->dst); + l2t_release(L2DATA(ep->com.tdev), ep->l2t); + put_ep(&ep->com); + return CPL_RET_BUF_DONE; + } + rpl_skb->priority = CPL_PRIORITY_DATA; + rpl = (struct cpl_abort_rpl *) skb_put(rpl_skb, sizeof(*rpl)); + rpl->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_HOST_ABORT_CON_RPL)); + rpl->wr.wr_lo = htonl(V_WR_TID(ep->hwtid)); + OPCODE_TID(rpl) = htonl(MK_OPCODE_TID(CPL_ABORT_RPL, ep->hwtid)); + rpl->cmd = CPL_ABORT_NO_RST; + ep->com.tdev->send(ep->com.tdev, rpl_skb); + if (state != ABORTING) { + state_set(&ep->com, DEAD); + release_ep_resources(ep); + } + return CPL_RET_BUF_DONE; +} + +static int close_con_rpl(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) +{ + struct iwch_ep *ep = ctx; + struct iwch_qp_attributes attrs; + unsigned long flags; + int release = 0; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + BUG_ON(!ep); + + /* The cm_id may be null if we failed to connect */ + spin_lock_irqsave(&ep->com.lock, flags); + switch (ep->com.state) { + case CLOSING: + start_ep_timer(ep); + __state_set(&ep->com, MORIBUND); + break; + case MORIBUND: + stop_ep_timer(ep); + if ((ep->com.cm_id) && (ep->com.qp)) { + attrs.next_state = IWCH_QP_STATE_IDLE; + iwch_modify_qp(ep->com.qp->rhp, + ep->com.qp, + IWCH_QP_ATTR_NEXT_STATE, + &attrs, 1); + } + close_complete_upcall(ep); + __state_set(&ep->com, DEAD); + release = 1; + break; + case DEAD: + default: + BUG_ON(1); + break; + } + spin_unlock_irqrestore(&ep->com.lock, flags); + if (release) + release_ep_resources(ep); + return CPL_RET_BUF_DONE; +} + +/* + * T3A does 3 things when a TERM is received: + * 1) send up a CPL_RDMA_TERMINATE message with the TERM packet + * 2) generate an async event on the QP with the TERMINATE opcode + * 3) post a TERMINATE opcde cqe into the associated CQ. + * + * For (1), we save the message in the qp for later consumer consumption. + * For (2), we move the QP into TERMINATE, post a QP event and disconnect. + * For (3), we toss the CQE in cxio_poll_cq(). + * + * terminate() handles case (1)... + */ +static int terminate(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) +{ + struct iwch_ep *ep = ctx; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + skb_pull(skb, sizeof(struct cpl_rdma_terminate)); + PDBG("%s saving %d bytes of term msg\n", __FUNCTION__, skb->len); + memcpy(ep->com.qp->attr.terminate_buffer, skb->data, skb->len); + ep->com.qp->attr.terminate_msg_len = skb->len; + ep->com.qp->attr.is_terminate_local = 0; + return CPL_RET_BUF_DONE; +} + +static int ec_status(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) +{ + struct cpl_rdma_ec_status *rep = cplhdr(skb); + struct iwch_ep *ep = ctx; + + PDBG("%s ep %p tid %u status %d\n", __FUNCTION__, ep, ep->hwtid, + rep->status); + if (rep->status) { + struct iwch_qp_attributes attrs; + + printk(KERN_ERR MOD "%s BAD CLOSE - Aborting tid %u\n", + __FUNCTION__, ep->hwtid); + attrs.next_state = IWCH_QP_STATE_ERROR; + iwch_modify_qp(ep->com.qp->rhp, + ep->com.qp, IWCH_QP_ATTR_NEXT_STATE, + &attrs, 1); + abort_connection(ep, NULL, GFP_KERNEL); + } + return CPL_RET_BUF_DONE; +} + +static void ep_timeout(unsigned long arg) +{ + struct iwch_ep *ep = (struct iwch_ep *)arg; + struct iwch_qp_attributes attrs; + unsigned long flags; + + spin_lock_irqsave(&ep->com.lock, flags); + PDBG("%s ep %p tid %u state %d\n", __FUNCTION__, ep, ep->hwtid, + ep->com.state); + switch (ep->com.state) { + case MPA_REQ_SENT: + connect_reply_upcall(ep, -ETIMEDOUT); + break; + case MPA_REQ_WAIT: + break; + case MORIBUND: + if (ep->com.cm_id && ep->com.qp) { + attrs.next_state = IWCH_QP_STATE_ERROR; + iwch_modify_qp(ep->com.qp->rhp, + ep->com.qp, IWCH_QP_ATTR_NEXT_STATE, + &attrs, 1); + } + break; + default: + BUG(); + } + __state_set(&ep->com, CLOSING); + spin_unlock_irqrestore(&ep->com.lock, flags); + abort_connection(ep, NULL, GFP_ATOMIC); + put_ep(&ep->com); +} + +int iwch_reject_cr(struct iw_cm_id *cm_id, const void *pdata, u8 pdata_len) +{ + int err; + struct iwch_ep *ep = to_ep(cm_id); + PDBG("%s ep %p tid %u\n", __FUNCTION__, ep, ep->hwtid); + + if (state_read(&ep->com) == DEAD) { + put_ep(&ep->com); + return -ECONNRESET; + } + BUG_ON(state_read(&ep->com) != MPA_REQ_RCVD); + state_set(&ep->com, CLOSING); + if (mpa_rev == 0) + abort_connection(ep, NULL, GFP_KERNEL); + else { + err = send_mpa_reject(ep, pdata, pdata_len); + err = send_halfclose(ep, GFP_KERNEL); + } + return 0; +} + +int iwch_accept_cr(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) +{ + int err; + struct iwch_qp_attributes attrs; + enum iwch_qp_attr_mask mask; + struct iwch_ep *ep = to_ep(cm_id); + struct iwch_dev *h = to_iwch_dev(cm_id->device); + struct iwch_qp *qp = get_qhp(h, conn_param->qpn); + + PDBG("%s ep %p tid %u\n", __FUNCTION__, ep, ep->hwtid); + if (state_read(&ep->com) == DEAD) { + put_ep(&ep->com); + return -ECONNRESET; + } + + BUG_ON(state_read(&ep->com) != MPA_REQ_RCVD); + BUG_ON(!qp); + + if ((conn_param->ord > qp->rhp->attr.max_rdma_read_qp_depth) || + (conn_param->ird > qp->rhp->attr.max_rdma_reads_per_qp)) { + abort_connection(ep, NULL, GFP_KERNEL); + return -EINVAL; + } + + cm_id->add_ref(cm_id); + ep->com.cm_id = cm_id; + ep->com.qp = qp; + + ep->com.rpl_done = 0; + ep->com.rpl_err = 0; + ep->ird = conn_param->ird; + ep->ord = conn_param->ord; + PDBG("%s %d ird %d ord %d\n", __FUNCTION__, __LINE__, ep->ird, ep->ord); + get_ep(&ep->com); + err = send_mpa_reply(ep, conn_param->private_data, + conn_param->private_data_len); + if (err) { + ep->com.cm_id = NULL; + ep->com.qp = NULL; + cm_id->rem_ref(cm_id); + abort_connection(ep, NULL, GFP_KERNEL); + put_ep(&ep->com); + return err; + } + + /* bind QP to EP and move to RTS */ + attrs.mpa_attr = ep->mpa_attr; + attrs.max_ird = ep->ord; + attrs.max_ord = ep->ord; + attrs.llp_stream_handle = ep; + attrs.next_state = IWCH_QP_STATE_RTS; + + /* bind QP and TID with INIT_WR */ + mask = IWCH_QP_ATTR_NEXT_STATE | + IWCH_QP_ATTR_LLP_STREAM_HANDLE | + IWCH_QP_ATTR_MPA_ATTR | + IWCH_QP_ATTR_MAX_IRD | + IWCH_QP_ATTR_MAX_ORD; + + err = iwch_modify_qp(ep->com.qp->rhp, + ep->com.qp, mask, &attrs, 1); + + if (err) { + ep->com.cm_id = NULL; + ep->com.qp = NULL; + cm_id->rem_ref(cm_id); + abort_connection(ep, NULL, GFP_KERNEL); + } else { + state_set(&ep->com, FPDU_MODE); + established_upcall(ep); + } + put_ep(&ep->com); + return err; +} + +int iwch_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) +{ + int err = 0; + struct iwch_dev *h = to_iwch_dev(cm_id->device); + struct iwch_ep *ep; + struct rtable *rt; + + ep = alloc_ep(sizeof(*ep), GFP_KERNEL); + if (!ep) { + printk(KERN_ERR MOD "%s - cannot alloc ep.\n", __FUNCTION__); + err = -ENOMEM; + goto out; + } + init_timer(&ep->timer); + ep->plen = conn_param->private_data_len; + if (ep->plen) + memcpy(ep->mpa_pkt + sizeof(struct mpa_message), + conn_param->private_data, ep->plen); + ep->ird = conn_param->ird; + ep->ord = conn_param->ord; + ep->com.tdev = h->rdev.t3cdev_p; + + cm_id->add_ref(cm_id); + ep->com.cm_id = cm_id; + ep->com.qp = get_qhp(h, conn_param->qpn); + BUG_ON(!ep->com.qp); + PDBG("%s qpn 0x%x qp %p cm_id %p\n", __FUNCTION__, conn_param->qpn, + ep->com.qp, cm_id); + + /* + * Allocate an active TID to initiate a TCP connection. + */ + ep->atid = cxgb3_alloc_atid(h->rdev.t3cdev_p, &t3c_client, ep); + if (ep->atid == -1) { + printk(KERN_ERR MOD "%s - cannot alloc atid.\n", __FUNCTION__); + err = -ENOMEM; + goto fail2; + } + + /* find a route */ + rt = find_route(h->rdev.t3cdev_p, + cm_id->local_addr.sin_addr.s_addr, + cm_id->remote_addr.sin_addr.s_addr, + cm_id->local_addr.sin_port, + cm_id->remote_addr.sin_port, IPTOS_LOWDELAY); + if (!rt) { + printk(KERN_ERR MOD "%s - cannot find route.\n", __FUNCTION__); + err = -EHOSTUNREACH; + goto fail3; + } + ep->dst = &rt->u.dst; + + /* get a l2t entry */ + ep->l2t = t3_l2t_get(ep->com.tdev, ep->dst->neighbour, + ep->dst->neighbour->dev); + if (!ep->l2t) { + printk(KERN_ERR MOD "%s - cannot alloc l2e.\n", __FUNCTION__); + err = -ENOMEM; + goto fail4; + } + + state_set(&ep->com, CONNECTING); + ep->tos = IPTOS_LOWDELAY; + ep->com.local_addr = cm_id->local_addr; + ep->com.remote_addr = cm_id->remote_addr; + + /* send connect request to rnic */ + err = send_connect(ep); + if (!err) + goto out; + + l2t_release(L2DATA(h->rdev.t3cdev_p), ep->l2t); +fail4: + dst_release(ep->dst); +fail3: + cxgb3_free_atid(ep->com.tdev, ep->atid); +fail2: + put_ep(&ep->com); +out: + return err; +} + +int iwch_create_listen(struct iw_cm_id *cm_id, int backlog) +{ + int err = 0; + struct iwch_dev *h = to_iwch_dev(cm_id->device); + struct iwch_listen_ep *ep; + + + might_sleep(); + + ep = alloc_ep(sizeof(*ep), GFP_KERNEL); + if (!ep) { + printk(KERN_ERR MOD "%s - cannot alloc ep.\n", __FUNCTION__); + err = -ENOMEM; + goto fail1; + } + PDBG("%s ep %p\n", __FUNCTION__, ep); + ep->com.tdev = h->rdev.t3cdev_p; + cm_id->add_ref(cm_id); + ep->com.cm_id = cm_id; + ep->backlog = backlog; + ep->com.local_addr = cm_id->local_addr; + + /* + * Allocate a server TID. + */ + ep->stid = cxgb3_alloc_stid(h->rdev.t3cdev_p, &t3c_client, ep); + if (ep->stid == -1) { + printk(KERN_ERR MOD "%s - cannot alloc atid.\n", __FUNCTION__); + err = -ENOMEM; + goto fail2; + } + + state_set(&ep->com, LISTEN); + err = listen_start(ep); + if (err) + goto fail3; + + /* wait for pass_open_rpl */ + wait_event(ep->com.waitq, ep->com.rpl_done); + err = ep->com.rpl_err; + if (!err) { + cm_id->provider_data = ep; + goto out; + } +fail3: + cxgb3_free_stid(ep->com.tdev, ep->stid); +fail2: + put_ep(&ep->com); +fail1: +out: + return err; +} + +int iwch_destroy_listen(struct iw_cm_id *cm_id) +{ + int err; + struct iwch_listen_ep *ep = to_listen_ep(cm_id); + + PDBG("%s ep %p\n", __FUNCTION__, ep); + + might_sleep(); + state_set(&ep->com, DEAD); + ep->com.rpl_done = 0; + ep->com.rpl_err = 0; + err = listen_stop(ep); + wait_event(ep->com.waitq, ep->com.rpl_done); + cxgb3_free_stid(ep->com.tdev, ep->stid); + err = ep->com.rpl_err; + cm_id->rem_ref(cm_id); + put_ep(&ep->com); + return err; +} + +int iwch_ep_disconnect(struct iwch_ep *ep, int abrupt, gfp_t gfp) +{ + int ret=0; + unsigned long flags; + int close = 0; + + spin_lock_irqsave(&ep->com.lock, flags); + + PDBG("%s ep %p state %s, abrupt %d\n", __FUNCTION__, ep, + states[ep->com.state], abrupt); + + if (ep->com.state == DEAD) { + PDBG("%s already dead ep %p\n", __FUNCTION__, ep); + goto out; + } + + if (abrupt) { + if (ep->com.state != ABORTING) { + ep->com.state = ABORTING; + close = 1; + } + goto out; + } + + switch (ep->com.state) { + case MPA_REQ_WAIT: + case MPA_REQ_SENT: + case MPA_REQ_RCVD: + case MPA_REP_SENT: + case FPDU_MODE: + ep->com.state = CLOSING; + close = 1; + break; + case CLOSING: + start_ep_timer(ep); + ep->com.state = MORIBUND; + close = 1; + break; + case MORIBUND: + break; + default: + BUG(); + break; + } +out: + spin_unlock_irqrestore(&ep->com.lock, flags); + if (close) { + if (abrupt) + ret = send_abort(ep, NULL, gfp); + else + ret = send_halfclose(ep, gfp); + } + return ret; +} + +int iwch_ep_redirect(void *ctx, struct dst_entry *old, struct dst_entry *new, + struct l2t_entry *l2t) +{ + struct iwch_ep *ep = ctx; + + if (ep->dst != old) + return 0; + + PDBG("%s ep %p redirect to dst %p l2t %p\n", __FUNCTION__, ep, new, + l2t); + dst_hold(new); + l2t_release(L2DATA(ep->com.tdev), ep->l2t); + ep->l2t = l2t; + dst_release(old); + ep->dst = new; + return 1; +} + +/* + * All the CM events are handled on a work queue to have a safe context. + */ +static int sched(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) +{ + struct iwch_ep_common *epc = ctx; + + get_ep(epc); + + /* + * Save ctx and tdev in the skb->cb area. + */ + *((void **) skb->cb) = ctx; + *((struct t3cdev **) (skb->cb + sizeof(void *))) = tdev; + + /* + * Queue the skb and schedule the worker thread. + */ + skb_queue_tail(&rxq, skb); + queue_work(workq, &skb_work); + return 0; +} + +int __init iwch_cm_init(void) +{ + skb_queue_head_init(&rxq); + + workq = create_singlethread_workqueue("iw_cxgb3"); + if (!workq) + return -ENOMEM; + + /* + * All upcalls from the T3 Core go to sched() to + * schedule the processing on a work queue. + */ + t3c_handlers[CPL_ACT_ESTABLISH] = sched; + t3c_handlers[CPL_ACT_OPEN_RPL] = sched; + t3c_handlers[CPL_RX_DATA] = sched; + t3c_handlers[CPL_TX_DMA_ACK] = sched; + t3c_handlers[CPL_ABORT_RPL_RSS] = sched; + t3c_handlers[CPL_ABORT_RPL] = sched; + t3c_handlers[CPL_PASS_OPEN_RPL] = sched; + t3c_handlers[CPL_CLOSE_LISTSRV_RPL] = sched; + t3c_handlers[CPL_PASS_ACCEPT_REQ] = sched; + t3c_handlers[CPL_PASS_ESTABLISH] = sched; + t3c_handlers[CPL_PEER_CLOSE] = sched; + t3c_handlers[CPL_CLOSE_CON_RPL] = sched; + t3c_handlers[CPL_ABORT_REQ_RSS] = sched; + t3c_handlers[CPL_RDMA_TERMINATE] = sched; + t3c_handlers[CPL_RDMA_EC_STATUS] = sched; + + /* + * These are the real handlers that are called from a + * work queue. + */ + work_handlers[CPL_ACT_ESTABLISH] = act_establish; + work_handlers[CPL_ACT_OPEN_RPL] = act_open_rpl; + work_handlers[CPL_RX_DATA] = rx_data; + work_handlers[CPL_TX_DMA_ACK] = tx_ack; + work_handlers[CPL_ABORT_RPL_RSS] = abort_rpl; + work_handlers[CPL_ABORT_RPL] = abort_rpl; + work_handlers[CPL_PASS_OPEN_RPL] = pass_open_rpl; + work_handlers[CPL_CLOSE_LISTSRV_RPL] = close_listsrv_rpl; + work_handlers[CPL_PASS_ACCEPT_REQ] = pass_accept_req; + work_handlers[CPL_PASS_ESTABLISH] = pass_establish; + work_handlers[CPL_PEER_CLOSE] = peer_close; + work_handlers[CPL_ABORT_REQ_RSS] = peer_abort; + work_handlers[CPL_CLOSE_CON_RPL] = close_con_rpl; + work_handlers[CPL_RDMA_TERMINATE] = terminate; + work_handlers[CPL_RDMA_EC_STATUS] = ec_status; + return 0; +} + +void __exit iwch_cm_term(void) +{ + flush_workqueue(workq); + destroy_workqueue(workq); +} diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.h b/drivers/infiniband/hw/cxgb3/iwch_cm.h new file mode 100644 index 0000000..7c810d9 --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/iwch_cm.h @@ -0,0 +1,223 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _IWCH_CM_H_ +#define _IWCH_CM_H_ + +#include +#include +#include +#include + +#include +#include + +#include "cxgb3_offload.h" +#include "iwch_provider.h" + +#define MPA_KEY_REQ "MPA ID Req Frame" +#define MPA_KEY_REP "MPA ID Rep Frame" + +#define MPA_MAX_PRIVATE_DATA 256 +#define MPA_REV 0 /* XXX - amso1100 uses rev 0 ! */ +#define MPA_REJECT 0x20 +#define MPA_CRC 0x40 +#define MPA_MARKERS 0x80 +#define MPA_FLAGS_MASK 0xE0 + +#define put_ep(ep) { \ + PDBG("put_ep (via %s:%u) ep %p refcnt %d\n", __FUNCTION__, __LINE__, \ + ep, atomic_read(&((ep)->kref.refcount))); \ + kref_put(&((ep)->kref), __free_ep); \ +} + +#define get_ep(ep) { \ + PDBG("get_ep (via %s:%u) ep %p, refcnt %d\n", __FUNCTION__, __LINE__, \ + ep, atomic_read(&((ep)->kref.refcount))); \ + kref_get(&((ep)->kref)); \ +} + +struct mpa_message { + u8 key[16]; + u8 flags; + u8 revision; + __be16 private_data_size; + u8 private_data[0]; +}; + +struct terminate_message { + u8 layer_etype; + u8 ecode; + __be16 hdrct_rsvd; + u8 len_hdrs[0]; +}; + +#define TERM_MAX_LENGTH (sizeof(struct terminate_message) + 2 + 18 + 28) + +enum iwch_layers_types { + LAYER_RDMAP = 0x00, + LAYER_DDP = 0x10, + LAYER_MPA = 0x20, + RDMAP_LOCAL_CATA = 0x00, + RDMAP_REMOTE_PROT = 0x01, + RDMAP_REMOTE_OP = 0x02, + DDP_LOCAL_CATA = 0x00, + DDP_TAGGED_ERR = 0x01, + DDP_UNTAGGED_ERR = 0x02, + DDP_LLP = 0x03 +}; + +enum iwch_rdma_ecodes { + RDMAP_INV_STAG = 0x00, + RDMAP_BASE_BOUNDS = 0x01, + RDMAP_ACC_VIOL = 0x02, + RDMAP_STAG_NOT_ASSOC = 0x03, + RDMAP_TO_WRAP = 0x04, + RDMAP_INV_VERS = 0x05, + RDMAP_INV_OPCODE = 0x06, + RDMAP_STREAM_CATA = 0x07, + RDMAP_GLOBAL_CATA = 0x08, + RDMAP_CANT_INV_STAG = 0x09, + RDMAP_UNSPECIFIED = 0xff +}; + +enum iwch_ddp_ecodes { + DDPT_INV_STAG = 0x00, + DDPT_BASE_BOUNDS = 0x01, + DDPT_STAG_NOT_ASSOC = 0x02, + DDPT_TO_WRAP = 0x03, + DDPT_INV_VERS = 0x04, + DDPU_INV_QN = 0x01, + DDPU_INV_MSN_NOBUF = 0x02, + DDPU_INV_MSN_RANGE = 0x03, + DDPU_INV_MO = 0x04, + DDPU_MSG_TOOBIG = 0x05, + DDPU_INV_VERS = 0x06 +}; + +enum iwch_mpa_ecodes { + MPA_CRC_ERR = 0x02, + MPA_MARKER_ERR = 0x03 +}; + +enum iwch_ep_state { + IDLE = 0, + LISTEN, + CONNECTING, + MPA_REQ_WAIT, + MPA_REQ_SENT, + MPA_REQ_RCVD, + MPA_REP_SENT, + FPDU_MODE, + ABORTING, + CLOSING, + MORIBUND, + DEAD, +}; + +struct iwch_ep_common { + struct iw_cm_id *cm_id; + struct iwch_qp *qp; + struct t3cdev *tdev; + enum iwch_ep_state state; + struct kref kref; + spinlock_t lock; + struct sockaddr_in local_addr; + struct sockaddr_in remote_addr; + wait_queue_head_t waitq; + int rpl_done; + int rpl_err; +}; + +struct iwch_listen_ep { + struct iwch_ep_common com; + unsigned int stid; + int backlog; +}; + +struct iwch_ep { + struct iwch_ep_common com; + struct iwch_ep *parent_ep; + struct timer_list timer; + unsigned int atid; + u32 hwtid; + u32 snd_seq; + struct l2t_entry *l2t; + struct dst_entry *dst; + struct sk_buff *mpa_skb; + struct iwch_mpa_attributes mpa_attr; + unsigned int mpa_pkt_len; + u8 mpa_pkt[sizeof(struct mpa_message) + MPA_MAX_PRIVATE_DATA]; + u8 tos; + u16 emss; + u16 plen; + u32 ird; + u32 ord; +}; + +static inline struct iwch_ep *to_ep(struct iw_cm_id *cm_id) +{ + return cm_id->provider_data; +} + +static inline struct iwch_listen_ep *to_listen_ep(struct iw_cm_id *cm_id) +{ + return cm_id->provider_data; +} + +static inline int compute_wscale(int win) +{ + int wscale = 0; + + while (wscale < 14 && (65535<cq); + + if (!rd_cqe) + return 0; + + qhp = get_qhp(rhp, CQE_QPID(*rd_cqe)); + if (!qhp) + wq = NULL; + else { + spin_lock(&qhp->lock); + wq = &(qhp->wq); + } + ret = cxio_poll_cq(wq, &(chp->cq), &cqe, &cqe_flushed, &cookie, + &credit); + if (t3a_device(chp->rhp) && credit) { + PDBG("%s updating %d cq credits on id %d\n", __FUNCTION__, + credit, chp->cq.cqid); + cxio_hal_cq_op(&rhp->rdev, &chp->cq, CQ_CREDIT_UPDATE, credit); + } + + if (ret) { + ret = -EAGAIN; + goto out; + } + ret = 1; + + wc->wr_id = cookie; + wc->qp = &qhp->ibqp; + wc->vendor_err = CQE_STATUS(cqe); + + PDBG("%s qpid 0x%x type %d opcode %d status 0x%x wrid hi 0x%x " + "lo 0x%x cookie 0x%llx\n", __FUNCTION__, + CQE_QPID(cqe), CQE_TYPE(cqe), + CQE_OPCODE(cqe), CQE_STATUS(cqe), CQE_WRID_HI(cqe), + CQE_WRID_LOW(cqe), (unsigned long long) cookie); + + if (CQE_TYPE(cqe) == 0) { + if (!CQE_STATUS(cqe)) + wc->byte_len = CQE_LEN(cqe); + else + wc->byte_len = 0; + wc->opcode = IB_WC_RECV; + } else { + switch (CQE_OPCODE(cqe)) { + case T3_RDMA_WRITE: + wc->opcode = IB_WC_RDMA_WRITE; + break; + case T3_READ_REQ: + wc->opcode = IB_WC_RDMA_READ; + wc->byte_len = CQE_LEN(cqe); + break; + case T3_SEND: + case T3_SEND_WITH_SE: + wc->opcode = IB_WC_SEND; + break; + case T3_BIND_MW: + wc->opcode = IB_WC_BIND_MW; + break; + + /* these aren't supported yet */ + case T3_SEND_WITH_INV: + case T3_SEND_WITH_SE_INV: + case T3_LOCAL_INV: + case T3_FAST_REGISTER: + default: + printk(KERN_ERR MOD "Unexpected opcode %d " + "in the CQE received for QPID=0x%0x\n", + CQE_OPCODE(cqe), CQE_QPID(cqe)); + ret = -EINVAL; + goto out; + } + } + + if (cqe_flushed) + wc->status = IB_WC_WR_FLUSH_ERR; + else { + + switch (CQE_STATUS(cqe)) { + case TPT_ERR_SUCCESS: + wc->status = IB_WC_SUCCESS; + break; + case TPT_ERR_STAG: + wc->status = IB_WC_LOC_ACCESS_ERR; + break; + case TPT_ERR_PDID: + wc->status = IB_WC_LOC_PROT_ERR; + break; + case TPT_ERR_QPID: + case TPT_ERR_ACCESS: + wc->status = IB_WC_LOC_ACCESS_ERR; + break; + case TPT_ERR_WRAP: + wc->status = IB_WC_GENERAL_ERR; + break; + case TPT_ERR_BOUND: + wc->status = IB_WC_LOC_LEN_ERR; + break; + case TPT_ERR_INVALIDATE_SHARED_MR: + case TPT_ERR_INVALIDATE_MR_WITH_MW_BOUND: + wc->status = IB_WC_MW_BIND_ERR; + break; + case TPT_ERR_CRC: + case TPT_ERR_MARKER: + case TPT_ERR_PDU_LEN_ERR: + case TPT_ERR_OUT_OF_RQE: + case TPT_ERR_DDP_VERSION: + case TPT_ERR_RDMA_VERSION: + case TPT_ERR_DDP_QUEUE_NUM: + case TPT_ERR_MSN: + case TPT_ERR_TBIT: + case TPT_ERR_MO: + case TPT_ERR_MSN_RANGE: + case TPT_ERR_IRD_OVERFLOW: + case TPT_ERR_OPCODE: + wc->status = IB_WC_FATAL_ERR; + break; + case TPT_ERR_SWFLUSH: + wc->status = IB_WC_WR_FLUSH_ERR; + break; + default: + printk(KERN_ERR MOD "Unexpected cqe_status 0x%x for " + "QPID=0x%0x\n", CQE_STATUS(cqe), CQE_QPID(cqe)); + ret = -EINVAL; + } + } +out: + if (wq) + spin_unlock(&qhp->lock); + return ret; +} + +int iwch_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *wc) +{ + struct iwch_dev *rhp; + struct iwch_cq *chp; + unsigned long flags; + int npolled; + int err = 0; + + chp = to_iwch_cq(ibcq); + rhp = chp->rhp; + + spin_lock_irqsave(&chp->lock, flags); + for (npolled = 0; npolled < num_entries; ++npolled) { +#ifdef DEBUG + int i=0; +#endif + + /* + * Because T3 can post CQEs that are _not_ associated + * with a WR, we might have to poll again after removing + * one of these. + */ + do { + err = iwch_poll_cq_one(rhp, chp, wc + npolled); +#ifdef DEBUG + BUG_ON(++i > 1000); +#endif + } while (err == -EAGAIN); + if (err <= 0) + break; + } + spin_unlock_irqrestore(&chp->lock, flags); + + if (err < 0) + return err; + else { + return npolled; + } +} diff --git a/drivers/infiniband/hw/cxgb3/iwch_ev.c b/drivers/infiniband/hw/cxgb3/iwch_ev.c new file mode 100644 index 0000000..a6efa8fe --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/iwch_ev.c @@ -0,0 +1,231 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include +#include +#include +#include "iwch_provider.h" +#include "iwch.h" +#include "iwch_cm.h" +#include "cxio_hal.h" +#include "cxio_wr.h" + +static void post_qp_event(struct iwch_dev *rnicp, struct iwch_cq *chp, + struct respQ_msg_t *rsp_msg, + enum ib_event_type ib_event, + int send_term) +{ + struct ib_event event; + struct iwch_qp_attributes attrs; + struct iwch_qp *qhp; + + printk(KERN_ERR "%s - AE qpid 0x%x opcode %d status 0x%x " + "type %d wrid.hi 0x%x wrid.lo 0x%x \n", __FUNCTION__, + CQE_QPID(rsp_msg->cqe), CQE_OPCODE(rsp_msg->cqe), + CQE_STATUS(rsp_msg->cqe), CQE_TYPE(rsp_msg->cqe), + CQE_WRID_HI(rsp_msg->cqe), CQE_WRID_LOW(rsp_msg->cqe)); + + spin_lock(&rnicp->lock); + qhp = get_qhp(rnicp, CQE_QPID(rsp_msg->cqe)); + + if (!qhp) { + printk(KERN_ERR "%s unaffiliated error 0x%x qpid 0x%x\n", + __FUNCTION__, CQE_STATUS(rsp_msg->cqe), + CQE_QPID(rsp_msg->cqe)); + spin_unlock(&rnicp->lock); + return; + } + + if ((qhp->attr.state == IWCH_QP_STATE_ERROR) || + (qhp->attr.state == IWCH_QP_STATE_TERMINATE)) { + PDBG("%s AE received after RTS - " + "qp state %d qpid 0x%x status 0x%x\n", __FUNCTION__, + qhp->attr.state, qhp->wq.qpid, CQE_STATUS(rsp_msg->cqe)); + spin_unlock(&rnicp->lock); + return; + } + + atomic_inc(&qhp->refcnt); + spin_unlock(&rnicp->lock); + + event.event = ib_event; + event.device = chp->ibcq.device; + if (ib_event == IB_EVENT_CQ_ERR) + event.element.cq = &chp->ibcq; + else + event.element.qp = &qhp->ibqp; + + if (qhp->ibqp.event_handler) + (*qhp->ibqp.event_handler)(&event, qhp->ibqp.qp_context); + + if (qhp->attr.state == IWCH_QP_STATE_RTS) { + attrs.next_state = IWCH_QP_STATE_TERMINATE; + iwch_modify_qp(qhp->rhp, qhp, IWCH_QP_ATTR_NEXT_STATE, + &attrs, 1); + if (send_term) + iwch_post_terminate(qhp, rsp_msg); + } + + if (atomic_dec_and_test(&qhp->refcnt)) + wake_up(&qhp->wait); +} + +void iwch_ev_dispatch(struct cxio_rdev *rdev_p, struct sk_buff *skb) +{ + struct iwch_dev *rnicp; + struct respQ_msg_t *rsp_msg = (struct respQ_msg_t *) skb->data; + struct iwch_cq *chp; + struct iwch_qp *qhp; + u32 cqid = RSPQ_CQID(rsp_msg); + + rnicp = (struct iwch_dev *) rdev_p->ulp; + spin_lock(&rnicp->lock); + chp = get_chp(rnicp, cqid); + qhp = get_qhp(rnicp, CQE_QPID(rsp_msg->cqe)); + if (!chp || !qhp) { + printk(KERN_ERR MOD "BAD AE cqid 0x%x qpid 0x%x opcode %d " + "status 0x%x type %d wrid.hi 0x%x wrid.lo 0x%x \n", + cqid, CQE_QPID(rsp_msg->cqe), + CQE_OPCODE(rsp_msg->cqe), CQE_STATUS(rsp_msg->cqe), + CQE_TYPE(rsp_msg->cqe), CQE_WRID_HI(rsp_msg->cqe), + CQE_WRID_LOW(rsp_msg->cqe)); + spin_unlock(&rnicp->lock); + goto out; + } + iwch_qp_add_ref(&qhp->ibqp); + atomic_inc(&chp->refcnt); + spin_unlock(&rnicp->lock); + + /* + * 1) completion of our sending a TERMINATE. + * 2) incoming TERMINATE message. + */ + if ((CQE_OPCODE(rsp_msg->cqe) == T3_TERMINATE) && + (CQE_STATUS(rsp_msg->cqe) == 0)) { + if (SQ_TYPE(rsp_msg->cqe)) { + PDBG("%s QPID 0x%x ep %p disconnecting\n", + __FUNCTION__, qhp->wq.qpid, qhp->ep); + iwch_ep_disconnect(qhp->ep, 0, GFP_ATOMIC); + } else { + PDBG("%s post REQ_ERR AE QPID 0x%x\n", __FUNCTION__, + qhp->wq.qpid); + post_qp_event(rnicp, chp, rsp_msg, + IB_EVENT_QP_REQ_ERR, 0); + iwch_ep_disconnect(qhp->ep, 0, GFP_ATOMIC); + } + goto done; + } + + /* Bad incoming Read request */ + if (SQ_TYPE(rsp_msg->cqe) && + (CQE_OPCODE(rsp_msg->cqe) == T3_READ_RESP)) { + post_qp_event(rnicp, chp, rsp_msg, IB_EVENT_QP_REQ_ERR, 1); + goto done; + } + + /* Bad incoming write */ + if (RQ_TYPE(rsp_msg->cqe) && + (CQE_OPCODE(rsp_msg->cqe) == T3_RDMA_WRITE)) { + post_qp_event(rnicp, chp, rsp_msg, IB_EVENT_QP_REQ_ERR, 1); + goto done; + } + + switch (CQE_STATUS(rsp_msg->cqe)) { + + /* Completion Events */ + case TPT_ERR_SUCCESS: + + /* + * Confirm the destination entry if this is a RECV completion. + */ + if (qhp->ep && SQ_TYPE(rsp_msg->cqe)) + dst_confirm(qhp->ep->dst); + (*chp->ibcq.comp_handler)(&chp->ibcq, chp->ibcq.cq_context); + break; + + case TPT_ERR_STAG: + case TPT_ERR_PDID: + case TPT_ERR_QPID: + case TPT_ERR_ACCESS: + case TPT_ERR_WRAP: + case TPT_ERR_BOUND: + case TPT_ERR_INVALIDATE_SHARED_MR: + case TPT_ERR_INVALIDATE_MR_WITH_MW_BOUND: + printk(KERN_ERR "%s - CQE Err qpid 0x%x opcode %d status 0x%x " + "type %d wrid.hi 0x%x wrid.lo 0x%x \n", __FUNCTION__, + CQE_QPID(rsp_msg->cqe), CQE_OPCODE(rsp_msg->cqe), + CQE_STATUS(rsp_msg->cqe), CQE_TYPE(rsp_msg->cqe), + CQE_WRID_HI(rsp_msg->cqe), CQE_WRID_LOW(rsp_msg->cqe)); + (*chp->ibcq.comp_handler)(&chp->ibcq, chp->ibcq.cq_context); + post_qp_event(rnicp, chp, rsp_msg, IB_EVENT_QP_ACCESS_ERR, 1); + break; + + /* Device Fatal Errors */ + case TPT_ERR_ECC: + case TPT_ERR_ECC_PSTAG: + case TPT_ERR_INTERNAL_ERR: + post_qp_event(rnicp, chp, rsp_msg, IB_EVENT_DEVICE_FATAL, 1); + break; + + /* QP Fatal Errors */ + case TPT_ERR_OUT_OF_RQE: + case TPT_ERR_PBL_ADDR_BOUND: + case TPT_ERR_CRC: + case TPT_ERR_MARKER: + case TPT_ERR_PDU_LEN_ERR: + case TPT_ERR_DDP_VERSION: + case TPT_ERR_RDMA_VERSION: + case TPT_ERR_OPCODE: + case TPT_ERR_DDP_QUEUE_NUM: + case TPT_ERR_MSN: + case TPT_ERR_TBIT: + case TPT_ERR_MO: + case TPT_ERR_MSN_GAP: + case TPT_ERR_MSN_RANGE: + case TPT_ERR_RQE_ADDR_BOUND: + case TPT_ERR_IRD_OVERFLOW: + post_qp_event(rnicp, chp, rsp_msg, IB_EVENT_QP_FATAL, 1); + break; + + default: + printk(KERN_ERR MOD "Unknown T3 status 0x%x QPID 0x%x\n", + CQE_STATUS(rsp_msg->cqe), qhp->wq.qpid); + post_qp_event(rnicp, chp, rsp_msg, IB_EVENT_QP_FATAL, 1); + break; + } +done: + if (atomic_dec_and_test(&chp->refcnt)) + wake_up(&chp->wait); + iwch_qp_rem_ref(&qhp->ibqp); +out: + dev_kfree_skb_irq(skb); +} diff --git a/drivers/infiniband/hw/cxgb3/iwch_mem.c b/drivers/infiniband/hw/cxgb3/iwch_mem.c new file mode 100644 index 0000000..2b6cd53 --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/iwch_mem.c @@ -0,0 +1,172 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include + +#include +#include + +#include "cxio_hal.h" +#include "iwch.h" +#include "iwch_provider.h" + +int iwch_register_mem(struct iwch_dev *rhp, struct iwch_pd *php, + struct iwch_mr *mhp, + int shift, + __be64 *page_list) +{ + u32 stag; + u32 mmid; + + + if (cxio_register_phys_mem(&rhp->rdev, + &stag, mhp->attr.pdid, + mhp->attr.perms, + mhp->attr.zbva, + mhp->attr.va_fbo, + mhp->attr.len, + shift-12, + page_list, + &mhp->attr.pbl_size, &mhp->attr.pbl_addr)) + return -ENOMEM; + mhp->attr.state = 1; + mhp->attr.stag = stag; + mmid = stag >> 8; + mhp->ibmr.rkey = mhp->ibmr.lkey = stag; + insert_handle(rhp, &rhp->mmidr, mhp, mmid); + PDBG("%s mmid 0x%x mhp %p\n", __FUNCTION__, mmid, mhp); + return 0; +} + +int iwch_reregister_mem(struct iwch_dev *rhp, struct iwch_pd *php, + struct iwch_mr *mhp, + int shift, + __be64 *page_list, + int npages) +{ + u32 stag; + u32 mmid; + + + /* We could support this... */ + if (npages > mhp->attr.pbl_size) + return -ENOMEM; + + stag = mhp->attr.stag; + if (cxio_reregister_phys_mem(&rhp->rdev, + &stag, mhp->attr.pdid, + mhp->attr.perms, + mhp->attr.zbva, + mhp->attr.va_fbo, + mhp->attr.len, + shift-12, + page_list, + &mhp->attr.pbl_size, &mhp->attr.pbl_addr)) + return -ENOMEM; + mhp->attr.state = 1; + mhp->attr.stag = stag; + mmid = stag >> 8; + mhp->ibmr.rkey = mhp->ibmr.lkey = stag; + insert_handle(rhp, &rhp->mmidr, mhp, mmid); + PDBG("%s mmid 0x%x mhp %p\n", __FUNCTION__, mmid, mhp); + return 0; +} + +int build_phys_page_list(struct ib_phys_buf *buffer_list, + int num_phys_buf, + u64 *iova_start, + u64 *total_size, + int *npages, + int *shift, + __be64 **page_list) +{ + u64 mask; + int i, j, n; + + mask = 0; + *total_size = 0; + for (i = 0; i < num_phys_buf; ++i) { + if (i != 0 && buffer_list[i].addr & ~PAGE_MASK) + return -EINVAL; + if (i != 0 && i != num_phys_buf - 1 && + (buffer_list[i].size & ~PAGE_MASK)) + return -EINVAL; + *total_size += buffer_list[i].size; + if (i > 0) + mask |= buffer_list[i].addr; + } + + if (*total_size > 0xFFFFFFFFULL) + return -ENOMEM; + + /* Find largest page shift we can use to cover buffers */ + for (*shift = PAGE_SHIFT; *shift < 27; ++(*shift)) + if (num_phys_buf > 1) { + if ((1ULL << *shift) & mask) + break; + } else + if (1ULL << *shift >= + buffer_list[0].size + + (buffer_list[0].addr & ((1ULL << *shift) - 1))) + break; + + buffer_list[0].size += buffer_list[0].addr & ((1ULL << *shift) - 1); + buffer_list[0].addr &= ~0ull << *shift; + + *npages = 0; + for (i = 0; i < num_phys_buf; ++i) + *npages += (buffer_list[i].size + + (1ULL << *shift) - 1) >> *shift; + + if (!*npages) + return -EINVAL; + + *page_list = kmalloc(sizeof(u64) * *npages, GFP_KERNEL); + if (!*page_list) + return -ENOMEM; + + n = 0; + for (i = 0; i < num_phys_buf; ++i) + for (j = 0; + j < (buffer_list[i].size + (1ULL << *shift) - 1) >> *shift; + ++j) + (*page_list)[n++] = cpu_to_be64(buffer_list[i].addr + + ((u64) j << *shift)); + + PDBG("%s va 0x%llx mask 0x%llx shift %d len %lld pbl_size %d\n", + __FUNCTION__, (unsigned long long) *iova_start, + (unsigned long long) mask, *shift, (unsigned long long) *total_size, + *npages); + + return 0; + +} diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c new file mode 100644 index 0000000..6861087 --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c @@ -0,0 +1,1203 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include + +#include "cxio_hal.h" +#include "iwch.h" +#include "iwch_provider.h" +#include "iwch_cm.h" +#include "iwch_user.h" + +static int iwch_modify_port(struct ib_device *ibdev, + u8 port, int port_modify_mask, + struct ib_port_modify *props) +{ + return -ENOSYS; +} + +static struct ib_ah *iwch_ah_create(struct ib_pd *pd, + struct ib_ah_attr *ah_attr) +{ + return ERR_PTR(-ENOSYS); +} + +static int iwch_ah_destroy(struct ib_ah *ah) +{ + return -ENOSYS; +} + +static int iwch_multicast_attach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid) +{ + return -ENOSYS; +} + +static int iwch_multicast_detach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid) +{ + return -ENOSYS; +} + +static int iwch_process_mad(struct ib_device *ibdev, + int mad_flags, + u8 port_num, + struct ib_wc *in_wc, + struct ib_grh *in_grh, + struct ib_mad *in_mad, struct ib_mad *out_mad) +{ + return -ENOSYS; +} + +static int iwch_dealloc_ucontext(struct ib_ucontext *context) +{ + struct iwch_dev *rhp = to_iwch_dev(context->device); + struct iwch_ucontext *ucontext = to_iwch_ucontext(context); + struct iwch_mm_entry *mm, *tmp; + + PDBG("%s context %p\n", __FUNCTION__, context); + list_for_each_entry_safe(mm, tmp, &ucontext->mmaps, entry) + kfree(mm); + cxio_release_ucontext(&rhp->rdev, &ucontext->uctx); + kfree(ucontext); + return 0; +} + +static struct ib_ucontext *iwch_alloc_ucontext(struct ib_device *ibdev, + struct ib_udata *udata) +{ + struct iwch_ucontext *context; + struct iwch_dev *rhp = to_iwch_dev(ibdev); + + PDBG("%s ibdev %p\n", __FUNCTION__, ibdev); + context = kzalloc(sizeof(*context), GFP_KERNEL); + if (!context) + return ERR_PTR(-ENOMEM); + cxio_init_ucontext(&rhp->rdev, &context->uctx); + INIT_LIST_HEAD(&context->mmaps); + spin_lock_init(&context->mmap_lock); + return &context->ibucontext; +} + +static int iwch_destroy_cq(struct ib_cq *ib_cq) +{ + struct iwch_cq *chp; + + PDBG("%s ib_cq %p\n", __FUNCTION__, ib_cq); + chp = to_iwch_cq(ib_cq); + + remove_handle(chp->rhp, &chp->rhp->cqidr, chp->cq.cqid); + atomic_dec(&chp->refcnt); + wait_event(chp->wait, !atomic_read(&chp->refcnt)); + + cxio_destroy_cq(&chp->rhp->rdev, &chp->cq); + kfree(chp); + return 0; +} + +static struct ib_cq *iwch_create_cq(struct ib_device *ibdev, int entries, + struct ib_ucontext *ib_context, + struct ib_udata *udata) +{ + struct iwch_dev *rhp; + struct iwch_cq *chp; + struct iwch_create_cq_resp uresp; + struct iwch_create_cq_req ureq; + struct iwch_ucontext *ucontext = NULL; + + PDBG("%s ib_dev %p entries %d\n", __FUNCTION__, ibdev, entries); + rhp = to_iwch_dev(ibdev); + chp = kzalloc(sizeof(*chp), GFP_KERNEL); + if (!chp) + return ERR_PTR(-ENOMEM); + + if (ib_context) { + ucontext = to_iwch_ucontext(ib_context); + if (!t3a_device(rhp)) { + if (ib_copy_from_udata(&ureq, udata, sizeof (ureq))) { + kfree(chp); + return ERR_PTR(-EFAULT); + } + chp->user_rptr_addr = (u32 __user *)(unsigned long)ureq.user_rptr_addr; + } + } + + if (t3a_device(rhp)) { + + /* + * T3A: Add some fluff to handle extra CQEs inserted + * for various errors. + * Additional CQE possibilities: + * TERMINATE, + * incoming RDMA WRITE Failures + * incoming RDMA READ REQUEST FAILUREs + * NOTE: We cannot ensure the CQ won't overflow. + */ + entries += 16; + } + entries = roundup_pow_of_two(entries); + chp->cq.size_log2 = ilog2(entries); + + if (cxio_create_cq(&rhp->rdev, &chp->cq)) { + kfree(chp); + return ERR_PTR(-ENOMEM); + } + chp->rhp = rhp; + chp->ibcq.cqe = (1 << chp->cq.size_log2) - 1; + spin_lock_init(&chp->lock); + atomic_set(&chp->refcnt, 1); + init_waitqueue_head(&chp->wait); + insert_handle(rhp, &rhp->cqidr, chp, chp->cq.cqid); + + if (ucontext) { + struct iwch_mm_entry *mm; + + mm = kmalloc(sizeof *mm, GFP_KERNEL); + if (!mm) { + iwch_destroy_cq(&chp->ibcq); + return ERR_PTR(-ENOMEM); + } + uresp.cqid = chp->cq.cqid; + uresp.size_log2 = chp->cq.size_log2; + spin_lock(&ucontext->mmap_lock); + uresp.key = ucontext->key; + ucontext->key += PAGE_SIZE; + spin_unlock(&ucontext->mmap_lock); + if (ib_copy_to_udata(udata, &uresp, sizeof (uresp))) { + kfree(mm); + iwch_destroy_cq(&chp->ibcq); + return ERR_PTR(-EFAULT); + } + mm->key = uresp.key; + mm->addr = virt_to_phys(chp->cq.queue); + mm->len = PAGE_ALIGN((1UL << uresp.size_log2) * + sizeof (struct t3_cqe)); + insert_mmap(ucontext, mm); + } + PDBG("created cqid 0x%0x chp %p size 0x%0x, dma_addr 0x%0llx\n", + chp->cq.cqid, chp, (1 << chp->cq.size_log2), + (unsigned long long) chp->cq.dma_addr); + return &chp->ibcq; +} + +static int iwch_resize_cq(struct ib_cq *cq, int cqe, struct ib_udata *udata) +{ +#ifdef notyet + struct iwch_cq *chp = to_iwch_cq(cq); + struct t3_cq oldcq, newcq; + int ret; + + PDBG("%s ib_cq %p cqe %d\n", __FUNCTION__, cq, cqe); + + /* We don't downsize... */ + if (cqe <= cq->cqe) + return 0; + + /* create new t3_cq with new size */ + cqe = roundup_pow_of_two(cqe+1); + newcq.size_log2 = ilog2(cqe); + + /* Dont allow resize to less than the current wce count */ + if (cqe < Q_COUNT(chp->cq.rptr, chp->cq.wptr)) { + return -ENOMEM; + } + + /* Quiesce all QPs using this CQ */ + ret = iwch_quiesce_qps(chp); + if (ret) { + return ret; + } + + ret = cxio_create_cq(&chp->rhp->rdev, &newcq); + if (ret) { + return ret; + } + + /* copy CQEs */ + memcpy(newcq.queue, chp->cq.queue, (1 << chp->cq.size_log2) * + sizeof(struct t3_cqe)); + + /* old iwch_qp gets new t3_cq but keeps old cqid */ + oldcq = chp->cq; + chp->cq = newcq; + chp->cq.cqid = oldcq.cqid; + + /* resize new t3_cq to update the HW context */ + ret = cxio_resize_cq(&chp->rhp->rdev, &chp->cq); + if (ret) { + chp->cq = oldcq; + return ret; + } + chp->ibcq.cqe = (1<cq.size_log2) - 1; + + /* destroy old t3_cq */ + oldcq.cqid = newcq.cqid; + ret = cxio_destroy_cq(&chp->rhp->rdev, &oldcq); + if (ret) { + printk(KERN_ERR MOD "%s - cxio_destroy_cq failed %d\n", + __FUNCTION__, ret); + } + + /* add user hooks here */ + + /* resume qps */ + ret = iwch_resume_qps(chp); + return ret; +#else + return -ENOSYS; +#endif +} + +static int iwch_arm_cq(struct ib_cq *ibcq, enum ib_cq_notify notify) +{ + struct iwch_dev *rhp; + struct iwch_cq *chp; + enum t3_cq_opcode cq_op; + int err; + unsigned long flag; + u32 rptr; + + chp = to_iwch_cq(ibcq); + rhp = chp->rhp; + if (notify == IB_CQ_SOLICITED) + cq_op = CQ_ARM_SE; + else + cq_op = CQ_ARM_AN; + if (chp->user_rptr_addr) { + if (get_user(rptr, chp->user_rptr_addr)) + return -EFAULT; + spin_lock_irqsave(&chp->lock, flag); + chp->cq.rptr = rptr; + } else + spin_lock_irqsave(&chp->lock, flag); + PDBG("%s rptr 0x%x\n", __FUNCTION__, chp->cq.rptr); + err = cxio_hal_cq_op(&rhp->rdev, &chp->cq, cq_op, 0); + spin_unlock_irqrestore(&chp->lock, flag); + if (err) + printk(KERN_ERR MOD "Error %d rearming CQID 0x%x\n", err, + chp->cq.cqid); + return err; +} + +static int iwch_mmap(struct ib_ucontext *context, struct vm_area_struct *vma) +{ + int len = vma->vm_end - vma->vm_start; + u32 key = vma->vm_pgoff << PAGE_SHIFT; + struct cxio_rdev *rdev_p; + int ret = 0; + struct iwch_mm_entry *mm; + struct iwch_ucontext *ucontext; + + PDBG("%s pgoff 0x%lx key 0x%x len %d\n", __FUNCTION__, vma->vm_pgoff, + key, len); + + if (vma->vm_start & (PAGE_SIZE-1)) { + return -EINVAL; + } + + rdev_p = &(to_iwch_dev(context->device)->rdev); + ucontext = to_iwch_ucontext(context); + + mm = remove_mmap(ucontext, key, len); + if (!mm) + return -EINVAL; + kfree(mm); + + if ((mm->addr >= rdev_p->rnic_info.udbell_physbase) && + (mm->addr < (rdev_p->rnic_info.udbell_physbase + + rdev_p->rnic_info.udbell_len))) { + + /* + * Map T3 DB register. + */ + if (vma->vm_flags & VM_READ) { + return -EPERM; + } + + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND; + vma->vm_flags &= ~VM_MAYREAD; + ret = io_remap_pfn_range(vma, vma->vm_start, + mm->addr >> PAGE_SHIFT, + len, vma->vm_page_prot); + } else { + + /* + * Map WQ or CQ contig dma memory... + */ + ret = remap_pfn_range(vma, vma->vm_start, + mm->addr >> PAGE_SHIFT, + len, vma->vm_page_prot); + } + + return ret; +} + +static int iwch_deallocate_pd(struct ib_pd *pd) +{ + struct iwch_dev *rhp; + struct iwch_pd *php; + + php = to_iwch_pd(pd); + rhp = php->rhp; + PDBG("%s ibpd %p pdid 0x%x\n", __FUNCTION__, pd, php->pdid); + cxio_hal_put_pdid(rhp->rdev.rscp, php->pdid); + kfree(php); + return 0; +} + +static struct ib_pd *iwch_allocate_pd(struct ib_device *ibdev, + struct ib_ucontext *context, + struct ib_udata *udata) +{ + struct iwch_pd *php; + u32 pdid; + struct iwch_dev *rhp; + + PDBG("%s ibdev %p\n", __FUNCTION__, ibdev); + rhp = (struct iwch_dev *) ibdev; + pdid = cxio_hal_get_pdid(rhp->rdev.rscp); + if (!pdid) + return ERR_PTR(-EINVAL); + php = kzalloc(sizeof(*php), GFP_KERNEL); + if (!php) { + cxio_hal_put_pdid(rhp->rdev.rscp, pdid); + return ERR_PTR(-ENOMEM); + } + php->pdid = pdid; + php->rhp = rhp; + if (context) { + if (ib_copy_to_udata(udata, &php->pdid, sizeof (__u32))) { + iwch_deallocate_pd(&php->ibpd); + return ERR_PTR(-EFAULT); + } + } + PDBG("%s pdid 0x%0x ptr 0x%p\n", __FUNCTION__, pdid, php); + return &php->ibpd; +} + +static int iwch_dereg_mr(struct ib_mr *ib_mr) +{ + struct iwch_dev *rhp; + struct iwch_mr *mhp; + u32 mmid; + + PDBG("%s ib_mr %p\n", __FUNCTION__, ib_mr); + /* There can be no memory windows */ + if (atomic_read(&ib_mr->usecnt)) + return -EINVAL; + + mhp = to_iwch_mr(ib_mr); + rhp = mhp->rhp; + mmid = mhp->attr.stag >> 8; + cxio_dereg_mem(&rhp->rdev, mhp->attr.stag, mhp->attr.pbl_size, + mhp->attr.pbl_addr); + remove_handle(rhp, &rhp->mmidr, mmid); + if (mhp->kva) + kfree((void *) (unsigned long) mhp->kva); + PDBG("%s mmid 0x%x ptr %p\n", __FUNCTION__, mmid, mhp); + kfree(mhp); + return 0; +} + +static struct ib_mr *iwch_register_phys_mem(struct ib_pd *pd, + struct ib_phys_buf *buffer_list, + int num_phys_buf, + int acc, + u64 *iova_start) +{ + __be64 *page_list; + int shift; + u64 total_size; + int npages; + struct iwch_dev *rhp; + struct iwch_pd *php; + struct iwch_mr *mhp; + int ret; + + PDBG("%s ib_pd %p\n", __FUNCTION__, pd); + php = to_iwch_pd(pd); + rhp = php->rhp; + + acc = iwch_convert_access(acc); + + + mhp = kzalloc(sizeof(*mhp), GFP_KERNEL); + if (!mhp) + return ERR_PTR(-ENOMEM); + + /* First check that we have enough alignment */ + if ((*iova_start & ~PAGE_MASK) != (buffer_list[0].addr & ~PAGE_MASK)) { + ret = -EINVAL; + goto err; + } + + if (num_phys_buf > 1 && + ((buffer_list[0].addr + buffer_list[0].size) & ~PAGE_MASK)) { + ret = -EINVAL; + goto err; + } + + ret = build_phys_page_list(buffer_list, num_phys_buf, iova_start, + &total_size, &npages, &shift, &page_list); + if (ret) + goto err; + + mhp->rhp = rhp; + mhp->attr.pdid = php->pdid; + mhp->attr.zbva = 0; + + /* NOTE: TPT perms are backwards from BIND WR perms! */ + mhp->attr.perms = (acc & 0x1) << 3; + mhp->attr.perms |= (acc & 0x2) << 1; + mhp->attr.perms |= (acc & 0x4) >> 1; + mhp->attr.perms |= (acc & 0x8) >> 3; + + mhp->attr.va_fbo = *iova_start; + mhp->attr.page_size = shift - 12; + + mhp->attr.len = (u32) total_size; + mhp->attr.pbl_size = npages; + ret = iwch_register_mem(rhp, php, mhp, shift, page_list); + kfree(page_list); + if (ret) { + goto err; + } + return &mhp->ibmr; +err: + kfree(mhp); + return ERR_PTR(ret); + +} + +static int iwch_reregister_phys_mem(struct ib_mr *mr, + int mr_rereg_mask, + struct ib_pd *pd, + struct ib_phys_buf *buffer_list, + int num_phys_buf, + int acc, u64 * iova_start) +{ + + struct iwch_mr mh, *mhp; + struct iwch_pd *php; + struct iwch_dev *rhp; + int new_acc; + __be64 *page_list = NULL; + int shift = 0; + u64 total_size; + int npages; + int ret; + + PDBG("%s ib_mr %p ib_pd %p\n", __FUNCTION__, mr, pd); + + /* There can be no memory windows */ + if (atomic_read(&mr->usecnt)) + return -EINVAL; + + mhp = to_iwch_mr(mr); + rhp = mhp->rhp; + php = to_iwch_pd(mr->pd); + + /* make sure we are on the same adapter */ + if (rhp != php->rhp) + return -EINVAL; + + new_acc = mhp->attr.perms; + + memcpy(&mh, mhp, sizeof *mhp); + + if (mr_rereg_mask & IB_MR_REREG_PD) + php = to_iwch_pd(pd); + if (mr_rereg_mask & IB_MR_REREG_ACCESS) + mh.attr.perms = iwch_convert_access(acc); + if (mr_rereg_mask & IB_MR_REREG_TRANS) + ret = build_phys_page_list(buffer_list, num_phys_buf, + iova_start, + &total_size, &npages, + &shift, &page_list); + + ret = iwch_reregister_mem(rhp, php, &mh, shift, page_list, npages); + kfree(page_list); + if (ret) { + return ret; + } + if (mr_rereg_mask & IB_MR_REREG_PD) + mhp->attr.pdid = php->pdid; + if (mr_rereg_mask & IB_MR_REREG_ACCESS) + mhp->attr.perms = acc; + if (mr_rereg_mask & IB_MR_REREG_TRANS) { + mhp->attr.zbva = 0; + mhp->attr.va_fbo = *iova_start; + mhp->attr.page_size = shift - 12; + mhp->attr.len = (u32) total_size; + mhp->attr.pbl_size = npages; + } + + return 0; +} + + +static struct ib_mr *iwch_reg_user_mr(struct ib_pd *pd, struct ib_umem *region, + int acc, struct ib_udata *udata) +{ + __be64 *pages; + int shift, n, len; + int i, j, k; + int err = 0; + struct ib_umem_chunk *chunk; + struct iwch_dev *rhp; + struct iwch_pd *php; + struct iwch_mr *mhp; + struct iwch_reg_user_mr_resp uresp; + + PDBG("%s ib_pd %p\n", __FUNCTION__, pd); + shift = ffs(region->page_size) - 1; + + php = to_iwch_pd(pd); + rhp = php->rhp; + mhp = kzalloc(sizeof(*mhp), GFP_KERNEL); + if (!mhp) + return ERR_PTR(-ENOMEM); + + n = 0; + list_for_each_entry(chunk, ®ion->chunk_list, list) + n += chunk->nents; + + pages = kmalloc(n * sizeof(u64), GFP_KERNEL); + if (!pages) { + err = -ENOMEM; + goto err; + } + + acc = iwch_convert_access(acc); + + i = n = 0; + + list_for_each_entry(chunk, ®ion->chunk_list, list) + for (j = 0; j < chunk->nmap; ++j) { + len = sg_dma_len(&chunk->page_list[j]) >> shift; + for (k = 0; k < len; ++k) { + pages[i++] = cpu_to_be64(sg_dma_address( + &chunk->page_list[j]) + + region->page_size * k); + } + } + + mhp->rhp = rhp; + mhp->attr.pdid = php->pdid; + mhp->attr.zbva = 0; + mhp->attr.perms = (acc & 0x1) << 3; + mhp->attr.perms |= (acc & 0x2) << 1; + mhp->attr.perms |= (acc & 0x4) >> 1; + mhp->attr.perms |= (acc & 0x8) >> 3; + mhp->attr.va_fbo = region->virt_base; + mhp->attr.page_size = shift - 12; + mhp->attr.len = (u32) region->length; + mhp->attr.pbl_size = i; + err = iwch_register_mem(rhp, php, mhp, shift, pages); + kfree(pages); + if (err) + goto err; + + if (udata && t3b_device(rhp)) { + uresp.pbl_addr = (mhp->attr.pbl_addr - + rhp->rdev.rnic_info.pbl_base) >> 3; + PDBG("%s user resp pbl_addr 0x%x\n", __FUNCTION__, + uresp.pbl_addr); + + if (ib_copy_to_udata(udata, &uresp, sizeof (uresp))) { + iwch_dereg_mr(&mhp->ibmr); + err = -EFAULT; + goto err; + } + } + + return &mhp->ibmr; + +err: + kfree(mhp); + return ERR_PTR(err); +} + +static struct ib_mr *iwch_get_dma_mr(struct ib_pd *pd, int acc) +{ + struct ib_phys_buf bl; + u64 kva; + struct ib_mr *ibmr; + + PDBG("%s ib_pd %p\n", __FUNCTION__, pd); + + /* + * T3 only supports 32 bits of size. + */ + bl.size = 0xffffffff; + bl.addr = 0; + kva = 0; + ibmr = iwch_register_phys_mem(pd, &bl, 1, acc, &kva); + return ibmr; +} + +static struct ib_mw *iwch_alloc_mw(struct ib_pd *pd) +{ + struct iwch_dev *rhp; + struct iwch_pd *php; + struct iwch_mw *mhp; + u32 mmid; + u32 stag = 0; + int ret; + + php = to_iwch_pd(pd); + rhp = php->rhp; + mhp = kzalloc(sizeof(*mhp), GFP_KERNEL); + if (!mhp) + return ERR_PTR(-ENOMEM); + ret = cxio_allocate_window(&rhp->rdev, &stag, php->pdid); + if (ret) { + kfree(mhp); + return ERR_PTR(ret); + } + mhp->rhp = rhp; + mhp->attr.pdid = php->pdid; + mhp->attr.type = TPT_MW; + mhp->attr.stag = stag; + mmid = (stag) >> 8; + insert_handle(rhp, &rhp->mmidr, mhp, mmid); + PDBG("%s mmid 0x%x mhp %p stag 0x%x\n", __FUNCTION__, mmid, mhp, stag); + return &(mhp->ibmw); +} + +static int iwch_dealloc_mw(struct ib_mw *mw) +{ + struct iwch_dev *rhp; + struct iwch_mw *mhp; + u32 mmid; + + mhp = to_iwch_mw(mw); + rhp = mhp->rhp; + mmid = (mw->rkey) >> 8; + cxio_deallocate_window(&rhp->rdev, mhp->attr.stag); + remove_handle(rhp, &rhp->mmidr, mmid); + kfree(mhp); + PDBG("%s ib_mw %p mmid 0x%x ptr %p\n", __FUNCTION__, mw, mmid, mhp); + return 0; +} + +static int iwch_destroy_qp(struct ib_qp *ib_qp) +{ + struct iwch_dev *rhp; + struct iwch_qp *qhp; + struct iwch_qp_attributes attrs; + struct iwch_ucontext *ucontext; + + qhp = to_iwch_qp(ib_qp); + rhp = qhp->rhp; + + if (qhp->attr.state == IWCH_QP_STATE_RTS) { + attrs.next_state = IWCH_QP_STATE_ERROR; + iwch_modify_qp(rhp, qhp, IWCH_QP_ATTR_NEXT_STATE, &attrs, 0); + } + wait_event(qhp->wait, !qhp->ep); + + remove_handle(rhp, &rhp->qpidr, qhp->wq.qpid); + + atomic_dec(&qhp->refcnt); + wait_event(qhp->wait, !atomic_read(&qhp->refcnt)); + + ucontext = ib_qp->uobject ? to_iwch_ucontext(ib_qp->uobject->context) + : NULL; + cxio_destroy_qp(&rhp->rdev, &qhp->wq, + ucontext ? &ucontext->uctx : &rhp->rdev.uctx); + + PDBG("%s ib_qp %p qpid 0x%0x qhp %p\n", __FUNCTION__, + ib_qp, qhp->wq.qpid, qhp); + kfree(qhp); + return 0; +} + +static struct ib_qp *iwch_create_qp(struct ib_pd *pd, + struct ib_qp_init_attr *attrs, + struct ib_udata *udata) +{ + struct iwch_dev *rhp; + struct iwch_qp *qhp; + struct iwch_pd *php; + struct iwch_cq *schp; + struct iwch_cq *rchp; + struct iwch_create_qp_resp uresp; + int wqsize, sqsize, rqsize; + struct iwch_ucontext *ucontext; + + PDBG("%s ib_pd %p\n", __FUNCTION__, pd); + if (attrs->qp_type != IB_QPT_RC) + return ERR_PTR(-EINVAL); + php = to_iwch_pd(pd); + rhp = php->rhp; + schp = get_chp(rhp, ((struct iwch_cq *) attrs->send_cq)->cq.cqid); + rchp = get_chp(rhp, ((struct iwch_cq *) attrs->recv_cq)->cq.cqid); + if (!schp || !rchp) + return ERR_PTR(-EINVAL); + + /* The RQT size must be # of entries + 1 rounded up to a power of two */ + rqsize = roundup_pow_of_two(attrs->cap.max_recv_wr); + if (rqsize == attrs->cap.max_recv_wr) + rqsize = roundup_pow_of_two(attrs->cap.max_recv_wr+1); + + /* T3 doesn't support RQT depth < 16 */ + if (rqsize < 16) + rqsize = 16; + + if (rqsize > T3_MAX_RQ_SIZE) + return ERR_PTR(-EINVAL); + + /* + * NOTE: The SQ and total WQ sizes don't need to be + * a power of two. However, all the code assumes + * they are. EG: Q_FREECNT() and friends. + */ + sqsize = roundup_pow_of_two(attrs->cap.max_send_wr); + wqsize = roundup_pow_of_two(rqsize + sqsize); + PDBG("%s wqsize %d sqsize %d rqsize %d\n", __FUNCTION__, + wqsize, sqsize, rqsize); + qhp = kzalloc(sizeof(*qhp), GFP_KERNEL); + if (!qhp) + return ERR_PTR(-ENOMEM); + qhp->wq.size_log2 = ilog2(wqsize); + qhp->wq.rq_size_log2 = ilog2(rqsize); + qhp->wq.sq_size_log2 = ilog2(sqsize); + ucontext = pd->uobject ? to_iwch_ucontext(pd->uobject->context) : NULL; + if (cxio_create_qp(&rhp->rdev, !udata, &qhp->wq, + ucontext ? &ucontext->uctx : &rhp->rdev.uctx)) { + kfree(qhp); + return ERR_PTR(-ENOMEM); + } + attrs->cap.max_recv_wr = rqsize - 1; + attrs->cap.max_send_wr = sqsize; + qhp->rhp = rhp; + qhp->attr.pd = php->pdid; + qhp->attr.scq = ((struct iwch_cq *) attrs->send_cq)->cq.cqid; + qhp->attr.rcq = ((struct iwch_cq *) attrs->recv_cq)->cq.cqid; + qhp->attr.sq_num_entries = attrs->cap.max_send_wr; + qhp->attr.rq_num_entries = attrs->cap.max_recv_wr; + qhp->attr.sq_max_sges = attrs->cap.max_send_sge; + qhp->attr.sq_max_sges_rdma_write = attrs->cap.max_send_sge; + qhp->attr.rq_max_sges = attrs->cap.max_recv_sge; + qhp->attr.state = IWCH_QP_STATE_IDLE; + qhp->attr.next_state = IWCH_QP_STATE_IDLE; + + /* + * XXX - These don't get passed in from the openib user + * at create time. The CM sets them via a QP modify. + * Need to fix... I think the CM should + */ + qhp->attr.enable_rdma_read = 1; + qhp->attr.enable_rdma_write = 1; + qhp->attr.enable_bind = 1; + qhp->attr.max_ord = 1; + qhp->attr.max_ird = 1; + + spin_lock_init(&qhp->lock); + init_waitqueue_head(&qhp->wait); + atomic_set(&qhp->refcnt, 1); + insert_handle(rhp, &rhp->qpidr, qhp, qhp->wq.qpid); + + if (udata) { + + struct iwch_mm_entry *mm1, *mm2; + + mm1 = kmalloc(sizeof *mm1, GFP_KERNEL); + if (!mm1) { + iwch_destroy_qp(&qhp->ibqp); + return ERR_PTR(-ENOMEM); + } + + mm2 = kmalloc(sizeof *mm2, GFP_KERNEL); + if (!mm2) { + kfree(mm1); + iwch_destroy_qp(&qhp->ibqp); + return ERR_PTR(-ENOMEM); + } + + uresp.qpid = qhp->wq.qpid; + uresp.size_log2 = qhp->wq.size_log2; + uresp.sq_size_log2 = qhp->wq.sq_size_log2; + uresp.rq_size_log2 = qhp->wq.rq_size_log2; + spin_lock(&ucontext->mmap_lock); + uresp.key = ucontext->key; + ucontext->key += PAGE_SIZE; + uresp.db_key = ucontext->key; + ucontext->key += PAGE_SIZE; + spin_unlock(&ucontext->mmap_lock); + if (ib_copy_to_udata(udata, &uresp, sizeof (uresp))) { + kfree(mm1); + kfree(mm2); + iwch_destroy_qp(&qhp->ibqp); + return ERR_PTR(-EFAULT); + } + mm1->key = uresp.key; + mm1->addr = virt_to_phys(qhp->wq.queue); + mm1->len = PAGE_ALIGN(wqsize * sizeof (union t3_wr)); + insert_mmap(ucontext, mm1); + mm2->key = uresp.db_key; + mm2->addr = qhp->wq.udb & PAGE_MASK; + mm2->len = PAGE_SIZE; + insert_mmap(ucontext, mm2); + } + qhp->ibqp.qp_num = qhp->wq.qpid; + init_timer(&(qhp->timer)); + PDBG("%s sq_num_entries %d, rq_num_entries %d " + "qpid 0x%0x qhp %p dma_addr 0x%llx size %d\n", + __FUNCTION__, qhp->attr.sq_num_entries, qhp->attr.rq_num_entries, + qhp->wq.qpid, qhp, (unsigned long long) qhp->wq.dma_addr, + 1 << qhp->wq.size_log2); + return &qhp->ibqp; +} + +static int iwch_ib_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, + int attr_mask, struct ib_udata *udata) +{ + struct iwch_dev *rhp; + struct iwch_qp *qhp; + enum iwch_qp_attr_mask mask = 0; + struct iwch_qp_attributes attrs; + + PDBG("%s ib_qp %p\n", __FUNCTION__, ibqp); + + /* iwarp does not support the RTR state */ + if ((attr_mask & IB_QP_STATE) && (attr->qp_state == IB_QPS_RTR)) + attr_mask &= ~IB_QP_STATE; + + /* Make sure we still have something left to do */ + if (!attr_mask) + return 0; + + memset(&attrs, 0, sizeof attrs); + qhp = to_iwch_qp(ibqp); + rhp = qhp->rhp; + + attrs.next_state = iwch_convert_state(attr->qp_state); + attrs.enable_rdma_read = (attr->qp_access_flags & + IB_ACCESS_REMOTE_READ) ? 1 : 0; + attrs.enable_rdma_write = (attr->qp_access_flags & + IB_ACCESS_REMOTE_WRITE) ? 1 : 0; + attrs.enable_bind = (attr->qp_access_flags & IB_ACCESS_MW_BIND) ? 1 : 0; + + + mask |= (attr_mask & IB_QP_STATE) ? IWCH_QP_ATTR_NEXT_STATE : 0; + mask |= (attr_mask & IB_QP_ACCESS_FLAGS) ? + (IWCH_QP_ATTR_ENABLE_RDMA_READ | + IWCH_QP_ATTR_ENABLE_RDMA_WRITE | + IWCH_QP_ATTR_ENABLE_RDMA_BIND) : 0; + + return iwch_modify_qp(rhp, qhp, mask, &attrs, 0); +} + +void iwch_qp_add_ref(struct ib_qp *qp) +{ + PDBG("%s ib_qp %p\n", __FUNCTION__, qp); + atomic_inc(&(to_iwch_qp(qp)->refcnt)); +} + +void iwch_qp_rem_ref(struct ib_qp *qp) +{ + PDBG("%s ib_qp %p\n", __FUNCTION__, qp); + if (atomic_dec_and_test(&(to_iwch_qp(qp)->refcnt))) + wake_up(&(to_iwch_qp(qp)->wait)); +} + +struct ib_qp *iwch_get_qp(struct ib_device *dev, int qpn) +{ + PDBG("%s ib_dev %p qpn 0x%x\n", __FUNCTION__, dev, qpn); + return (struct ib_qp *)get_qhp(to_iwch_dev(dev), qpn); +} + + +static int iwch_query_pkey(struct ib_device *ibdev, + u8 port, u16 index, u16 * pkey) +{ + PDBG("%s ibdev %p\n", __FUNCTION__, ibdev); + *pkey = 0; + return 0; +} + +static int iwch_query_gid(struct ib_device *ibdev, u8 port, + int index, union ib_gid *gid) +{ + struct iwch_dev *dev; + + PDBG("%s ibdev %p, port %d, index %d, gid %p\n", + __FUNCTION__, ibdev, port, index, gid); + dev = to_iwch_dev(ibdev); + BUG_ON(port == 0 || port > 2); + memset(&(gid->raw[0]), 0, sizeof(gid->raw)); + memcpy(&(gid->raw[0]), dev->rdev.port_info.lldevs[port-1]->dev_addr, 6); + return 0; +} + +static int iwch_query_device(struct ib_device *ibdev, + struct ib_device_attr *props) +{ + + struct iwch_dev *dev; + PDBG("%s ibdev %p\n", __FUNCTION__, ibdev); + + dev = to_iwch_dev(ibdev); + memset(props, 0, sizeof *props); + memcpy(&props->sys_image_guid, dev->rdev.t3cdev_p->lldev->dev_addr, 6); + props->device_cap_flags = dev->device_cap_flags; + props->vendor_id = (u32)dev->rdev.rnic_info.pdev->vendor; + props->vendor_part_id = (u32)dev->rdev.rnic_info.pdev->device; + props->max_mr_size = ~0ull; + props->max_qp = dev->attr.max_qps; + props->max_qp_wr = dev->attr.max_wrs; + props->max_sge = dev->attr.max_sge_per_wr; + props->max_sge_rd = 1; + props->max_qp_rd_atom = dev->attr.max_rdma_reads_per_qp; + props->max_cq = dev->attr.max_cqs; + props->max_cqe = dev->attr.max_cqes_per_cq; + props->max_mr = dev->attr.max_mem_regs; + props->max_pd = dev->attr.max_pds; + props->local_ca_ack_delay = 0; + + return 0; +} + +static int iwch_query_port(struct ib_device *ibdev, + u8 port, struct ib_port_attr *props) +{ + PDBG("%s ibdev %p\n", __FUNCTION__, ibdev); + props->max_mtu = IB_MTU_4096; + props->lid = 0; + props->lmc = 0; + props->sm_lid = 0; + props->sm_sl = 0; + props->state = IB_PORT_ACTIVE; + props->phys_state = 0; + props->port_cap_flags = + IB_PORT_CM_SUP | + IB_PORT_SNMP_TUNNEL_SUP | + IB_PORT_REINIT_SUP | + IB_PORT_DEVICE_MGMT_SUP | + IB_PORT_VENDOR_CLASS_SUP | IB_PORT_BOOT_MGMT_SUP; + props->gid_tbl_len = 1; + props->pkey_tbl_len = 1; + props->qkey_viol_cntr = 0; + props->active_width = 2; + props->active_speed = 2; + props->max_msg_sz = -1; + + return 0; +} + +static ssize_t show_rev(struct class_device *cdev, char *buf) +{ + struct iwch_dev *dev = container_of(cdev, struct iwch_dev, + ibdev.class_dev); + PDBG("%s class dev 0x%p\n", __FUNCTION__, cdev); + return sprintf(buf, "%d\n", dev->rdev.t3cdev_p->type); +} + +static ssize_t show_fw_ver(struct class_device *cdev, char *buf) +{ + struct iwch_dev *dev = container_of(cdev, struct iwch_dev, + ibdev.class_dev); + struct ethtool_drvinfo info; + struct net_device *lldev = dev->rdev.t3cdev_p->lldev; + + PDBG("%s class dev 0x%p\n", __FUNCTION__, cdev); + lldev->ethtool_ops->get_drvinfo(lldev, &info); + return sprintf(buf, "%s\n", info.fw_version); +} + +static ssize_t show_hca(struct class_device *cdev, char *buf) +{ + struct iwch_dev *dev = container_of(cdev, struct iwch_dev, + ibdev.class_dev); + struct ethtool_drvinfo info; + struct net_device *lldev = dev->rdev.t3cdev_p->lldev; + + PDBG("%s class dev 0x%p\n", __FUNCTION__, cdev); + lldev->ethtool_ops->get_drvinfo(lldev, &info); + return sprintf(buf, "%s\n", info.driver); +} + +static ssize_t show_board(struct class_device *cdev, char *buf) +{ + struct iwch_dev *dev = container_of(cdev, struct iwch_dev, + ibdev.class_dev); + PDBG("%s class dev 0x%p\n", __FUNCTION__, dev); + return sprintf(buf, "%x.%x\n", dev->rdev.rnic_info.pdev->vendor, + dev->rdev.rnic_info.pdev->device); +} + +static CLASS_DEVICE_ATTR(hw_rev, S_IRUGO, show_rev, NULL); +static CLASS_DEVICE_ATTR(fw_ver, S_IRUGO, show_fw_ver, NULL); +static CLASS_DEVICE_ATTR(hca_type, S_IRUGO, show_hca, NULL); +static CLASS_DEVICE_ATTR(board_id, S_IRUGO, show_board, NULL); + +static struct class_device_attribute *iwch_class_attributes[] = { + &class_device_attr_hw_rev, + &class_device_attr_fw_ver, + &class_device_attr_hca_type, + &class_device_attr_board_id +}; + +int iwch_register_device(struct iwch_dev *dev) +{ + int ret; + int i; + + PDBG("%s iwch_dev %p\n", __FUNCTION__, dev); + strlcpy(dev->ibdev.name, "cxgb3_%d", IB_DEVICE_NAME_MAX); + memset(&dev->ibdev.node_guid, 0, sizeof(dev->ibdev.node_guid)); + memcpy(&dev->ibdev.node_guid, dev->rdev.t3cdev_p->lldev->dev_addr, 6); + dev->ibdev.owner = THIS_MODULE; + dev->device_cap_flags = + (IB_DEVICE_ZERO_STAG | + IB_DEVICE_SEND_W_INV | IB_DEVICE_MEM_WINDOW); + + dev->ibdev.uverbs_cmd_mask = + (1ull << IB_USER_VERBS_CMD_GET_CONTEXT) | + (1ull << IB_USER_VERBS_CMD_QUERY_DEVICE) | + (1ull << IB_USER_VERBS_CMD_QUERY_PORT) | + (1ull << IB_USER_VERBS_CMD_ALLOC_PD) | + (1ull << IB_USER_VERBS_CMD_DEALLOC_PD) | + (1ull << IB_USER_VERBS_CMD_REG_MR) | + (1ull << IB_USER_VERBS_CMD_DEREG_MR) | + (1ull << IB_USER_VERBS_CMD_CREATE_COMP_CHANNEL) | + (1ull << IB_USER_VERBS_CMD_CREATE_CQ) | + (1ull << IB_USER_VERBS_CMD_DESTROY_CQ) | + (1ull << IB_USER_VERBS_CMD_REQ_NOTIFY_CQ) | + (1ull << IB_USER_VERBS_CMD_CREATE_QP) | + (1ull << IB_USER_VERBS_CMD_MODIFY_QP) | + (1ull << IB_USER_VERBS_CMD_POLL_CQ) | + (1ull << IB_USER_VERBS_CMD_DESTROY_QP) | + (1ull << IB_USER_VERBS_CMD_POST_SEND) | + (1ull << IB_USER_VERBS_CMD_POST_RECV); + dev->ibdev.node_type = RDMA_NODE_RNIC; + memcpy(dev->ibdev.node_desc, IWCH_NODE_DESC, sizeof(IWCH_NODE_DESC)); + dev->ibdev.phys_port_cnt = dev->rdev.port_info.nports; + dev->ibdev.dma_device = &(dev->rdev.rnic_info.pdev->dev); + dev->ibdev.class_dev.dev = &(dev->rdev.rnic_info.pdev->dev); + dev->ibdev.query_device = iwch_query_device; + dev->ibdev.query_port = iwch_query_port; + dev->ibdev.modify_port = iwch_modify_port; + dev->ibdev.query_pkey = iwch_query_pkey; + dev->ibdev.query_gid = iwch_query_gid; + dev->ibdev.alloc_ucontext = iwch_alloc_ucontext; + dev->ibdev.dealloc_ucontext = iwch_dealloc_ucontext; + dev->ibdev.mmap = iwch_mmap; + dev->ibdev.alloc_pd = iwch_allocate_pd; + dev->ibdev.dealloc_pd = iwch_deallocate_pd; + dev->ibdev.create_ah = iwch_ah_create; + dev->ibdev.destroy_ah = iwch_ah_destroy; + dev->ibdev.create_qp = iwch_create_qp; + dev->ibdev.modify_qp = iwch_ib_modify_qp; + dev->ibdev.destroy_qp = iwch_destroy_qp; + dev->ibdev.create_cq = iwch_create_cq; + dev->ibdev.destroy_cq = iwch_destroy_cq; + dev->ibdev.resize_cq = iwch_resize_cq; + dev->ibdev.poll_cq = iwch_poll_cq; + dev->ibdev.get_dma_mr = iwch_get_dma_mr; + dev->ibdev.reg_phys_mr = iwch_register_phys_mem; + dev->ibdev.rereg_phys_mr = iwch_reregister_phys_mem; + dev->ibdev.reg_user_mr = iwch_reg_user_mr; + dev->ibdev.dereg_mr = iwch_dereg_mr; + dev->ibdev.alloc_mw = iwch_alloc_mw; + dev->ibdev.bind_mw = iwch_bind_mw; + dev->ibdev.dealloc_mw = iwch_dealloc_mw; + + dev->ibdev.attach_mcast = iwch_multicast_attach; + dev->ibdev.detach_mcast = iwch_multicast_detach; + dev->ibdev.process_mad = iwch_process_mad; + + dev->ibdev.req_notify_cq = iwch_arm_cq; + dev->ibdev.post_send = iwch_post_send; + dev->ibdev.post_recv = iwch_post_receive; + + + dev->ibdev.iwcm = + (struct iw_cm_verbs *) kmalloc(sizeof(struct iw_cm_verbs), + GFP_KERNEL); + dev->ibdev.iwcm->connect = iwch_connect; + dev->ibdev.iwcm->accept = iwch_accept_cr; + dev->ibdev.iwcm->reject = iwch_reject_cr; + dev->ibdev.iwcm->create_listen = iwch_create_listen; + dev->ibdev.iwcm->destroy_listen = iwch_destroy_listen; + dev->ibdev.iwcm->add_ref = iwch_qp_add_ref; + dev->ibdev.iwcm->rem_ref = iwch_qp_rem_ref; + dev->ibdev.iwcm->get_qp = iwch_get_qp; + + ret = ib_register_device(&dev->ibdev); + if (ret) + goto bail1; + + for (i = 0; i < ARRAY_SIZE(iwch_class_attributes); ++i) { + ret = class_device_create_file(&dev->ibdev.class_dev, + iwch_class_attributes[i]); + if (ret) { + goto bail2; + } + } + return 0; +bail2: + ib_unregister_device(&dev->ibdev); +bail1: + return ret; +} + +void iwch_unregister_device(struct iwch_dev *dev) +{ + int i; + + PDBG("%s iwch_dev %p\n", __FUNCTION__, dev); + for (i = 0; i < ARRAY_SIZE(iwch_class_attributes); ++i) + class_device_remove_file(&dev->ibdev.class_dev, + iwch_class_attributes[i]); + ib_unregister_device(&dev->ibdev); + return; +} diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.h b/drivers/infiniband/hw/cxgb3/iwch_provider.h new file mode 100644 index 0000000..61e3278 --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/iwch_provider.h @@ -0,0 +1,367 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef __IWCH_PROVIDER_H__ +#define __IWCH_PROVIDER_H__ + +#include +#include +#include +#include +#include "t3cdev.h" +#include "iwch.h" +#include "cxio_wr.h" +#include "cxio_hal.h" + +struct iwch_pd { + struct ib_pd ibpd; + u32 pdid; + struct iwch_dev *rhp; +}; + +static inline struct iwch_pd *to_iwch_pd(struct ib_pd *ibpd) +{ + return container_of(ibpd, struct iwch_pd, ibpd); +} + +struct tpt_attributes { + u32 stag; + u32 state:1; + u32 type:2; + u32 rsvd:1; + enum tpt_mem_perm perms; + u32 remote_invaliate_disable:1; + u32 zbva:1; + u32 mw_bind_enable:1; + u32 page_size:5; + + u32 pdid; + u32 qpid; + u32 pbl_addr; + u32 len; + u64 va_fbo; + u32 pbl_size; +}; + +struct iwch_mr { + struct ib_mr ibmr; + struct iwch_dev *rhp; + u64 kva; + struct tpt_attributes attr; +}; + +typedef struct iwch_mw iwch_mw_handle; + +static inline struct iwch_mr *to_iwch_mr(struct ib_mr *ibmr) +{ + return container_of(ibmr, struct iwch_mr, ibmr); +} + +struct iwch_mw { + struct ib_mw ibmw; + struct iwch_dev *rhp; + u64 kva; + struct tpt_attributes attr; +}; + +static inline struct iwch_mw *to_iwch_mw(struct ib_mw *ibmw) +{ + return container_of(ibmw, struct iwch_mw, ibmw); +} + +struct iwch_cq { + struct ib_cq ibcq; + struct iwch_dev *rhp; + struct t3_cq cq; + spinlock_t lock; + atomic_t refcnt; + wait_queue_head_t wait; + u32 __user *user_rptr_addr; +}; + +static inline struct iwch_cq *to_iwch_cq(struct ib_cq *ibcq) +{ + return container_of(ibcq, struct iwch_cq, ibcq); +} + +enum IWCH_QP_FLAGS { + QP_QUIESCED = 0x01 +}; + +struct iwch_mpa_attributes { + u8 recv_marker_enabled; + u8 xmit_marker_enabled; /* iWARP: enable inbound Read Resp. */ + u8 crc_enabled; + u8 version; /* 0 or 1 */ +}; + +struct iwch_qp_attributes { + u32 scq; + u32 rcq; + u32 sq_num_entries; + u32 rq_num_entries; + u32 sq_max_sges; + u32 sq_max_sges_rdma_write; + u32 rq_max_sges; + u32 state; + u8 enable_rdma_read; + u8 enable_rdma_write; /* enable inbound Read Resp. */ + u8 enable_bind; + u8 enable_mmid0_fastreg; /* Enable STAG0 + Fast-register */ + /* + * Next QP state. If specify the current state, only the + * QP attributes will be modified. + */ + u32 max_ord; + u32 max_ird; + u32 pd; /* IN */ + u32 next_state; + char terminate_buffer[52]; + u32 terminate_msg_len; + u8 is_terminate_local; + struct iwch_mpa_attributes mpa_attr; /* IN-OUT */ + struct iwch_ep *llp_stream_handle; + char *stream_msg_buf; /* Last stream msg. before Idle -> RTS */ + u32 stream_msg_buf_len; /* Only on Idle -> RTS */ +}; + +struct iwch_qp { + struct ib_qp ibqp; + struct iwch_dev *rhp; + struct iwch_ep *ep; + struct iwch_qp_attributes attr; + struct t3_wq wq; + spinlock_t lock; + atomic_t refcnt; + wait_queue_head_t wait; + enum IWCH_QP_FLAGS flags; + struct timer_list timer; +}; + +static inline int qp_quiesced(struct iwch_qp *qhp) +{ + return qhp->flags & QP_QUIESCED; +} + +static inline struct iwch_qp *to_iwch_qp(struct ib_qp *ibqp) +{ + return container_of(ibqp, struct iwch_qp, ibqp); +} + +void iwch_qp_add_ref(struct ib_qp *qp); +void iwch_qp_rem_ref(struct ib_qp *qp); +struct ib_qp *iwch_get_qp(struct ib_device *dev, int qpn); + +struct iwch_ucontext { + struct ib_ucontext ibucontext; + struct cxio_ucontext uctx; + u32 key; + spinlock_t mmap_lock; + struct list_head mmaps; +}; + +static inline struct iwch_ucontext *to_iwch_ucontext(struct ib_ucontext *c) +{ + return container_of(c, struct iwch_ucontext, ibucontext); +} + +struct iwch_mm_entry { + struct list_head entry; + u64 addr; + u32 key; + unsigned len; +}; + +static inline struct iwch_mm_entry *remove_mmap(struct iwch_ucontext *ucontext, + u32 key, unsigned len) +{ + struct list_head *pos, *nxt; + struct iwch_mm_entry *mm; + + spin_lock(&ucontext->mmap_lock); + list_for_each_safe(pos, nxt, &ucontext->mmaps) { + + mm = list_entry(pos, struct iwch_mm_entry, entry); + if (mm->key == key && mm->len == len) { + list_del_init(&mm->entry); + spin_unlock(&ucontext->mmap_lock); + PDBG("%s key 0x%x addr 0x%llx len %d\n", __FUNCTION__, + key, (unsigned long long) mm->addr, mm->len); + return mm; + } + } + spin_unlock(&ucontext->mmap_lock); + return NULL; +} + +static inline void insert_mmap(struct iwch_ucontext *ucontext, + struct iwch_mm_entry *mm) +{ + spin_lock(&ucontext->mmap_lock); + PDBG("%s key 0x%x addr 0x%llx len %d\n", __FUNCTION__, + mm->key, (unsigned long long) mm->addr, mm->len); + list_add_tail(&mm->entry, &ucontext->mmaps); + spin_unlock(&ucontext->mmap_lock); +} + +enum iwch_qp_attr_mask { + IWCH_QP_ATTR_NEXT_STATE = 1 << 0, + IWCH_QP_ATTR_ENABLE_RDMA_READ = 1 << 7, + IWCH_QP_ATTR_ENABLE_RDMA_WRITE = 1 << 8, + IWCH_QP_ATTR_ENABLE_RDMA_BIND = 1 << 9, + IWCH_QP_ATTR_MAX_ORD = 1 << 11, + IWCH_QP_ATTR_MAX_IRD = 1 << 12, + IWCH_QP_ATTR_LLP_STREAM_HANDLE = 1 << 22, + IWCH_QP_ATTR_STREAM_MSG_BUFFER = 1 << 23, + IWCH_QP_ATTR_MPA_ATTR = 1 << 24, + IWCH_QP_ATTR_QP_CONTEXT_ACTIVATE = 1 << 25, + IWCH_QP_ATTR_VALID_MODIFY = (IWCH_QP_ATTR_ENABLE_RDMA_READ | + IWCH_QP_ATTR_ENABLE_RDMA_WRITE | + IWCH_QP_ATTR_MAX_ORD | + IWCH_QP_ATTR_MAX_IRD | + IWCH_QP_ATTR_LLP_STREAM_HANDLE | + IWCH_QP_ATTR_STREAM_MSG_BUFFER | + IWCH_QP_ATTR_MPA_ATTR | + IWCH_QP_ATTR_QP_CONTEXT_ACTIVATE) +}; + +int iwch_modify_qp(struct iwch_dev *rhp, + struct iwch_qp *qhp, + enum iwch_qp_attr_mask mask, + struct iwch_qp_attributes *attrs, + int internal); + +enum iwch_qp_state { + IWCH_QP_STATE_IDLE, + IWCH_QP_STATE_RTS, + IWCH_QP_STATE_ERROR, + IWCH_QP_STATE_TERMINATE, + IWCH_QP_STATE_CLOSING, + IWCH_QP_STATE_TOT +}; + +static inline int iwch_convert_state(enum ib_qp_state ib_state) +{ + switch (ib_state) { + case IB_QPS_RESET: + case IB_QPS_INIT: + return IWCH_QP_STATE_IDLE; + case IB_QPS_RTS: + return IWCH_QP_STATE_RTS; + case IB_QPS_SQD: + return IWCH_QP_STATE_CLOSING; + case IB_QPS_SQE: + return IWCH_QP_STATE_TERMINATE; + case IB_QPS_ERR: + return IWCH_QP_STATE_ERROR; + default: + return -1; + } +} + +enum iwch_mem_perms { + IWCH_MEM_ACCESS_LOCAL_READ = 1 << 0, + IWCH_MEM_ACCESS_LOCAL_WRITE = 1 << 1, + IWCH_MEM_ACCESS_REMOTE_READ = 1 << 2, + IWCH_MEM_ACCESS_REMOTE_WRITE = 1 << 3, + IWCH_MEM_ACCESS_ATOMICS = 1 << 4, + IWCH_MEM_ACCESS_BINDING = 1 << 5, + IWCH_MEM_ACCESS_LOCAL = + (IWCH_MEM_ACCESS_LOCAL_READ | IWCH_MEM_ACCESS_LOCAL_WRITE), + IWCH_MEM_ACCESS_REMOTE = + (IWCH_MEM_ACCESS_REMOTE_WRITE | IWCH_MEM_ACCESS_REMOTE_READ) + /* cannot go beyond 1 << 31 */ +} __attribute__ ((packed)); + +static inline u32 iwch_convert_access(int acc) +{ + return (acc & IB_ACCESS_REMOTE_WRITE ? IWCH_MEM_ACCESS_REMOTE_WRITE : 0) + | (acc & IB_ACCESS_REMOTE_READ ? IWCH_MEM_ACCESS_REMOTE_READ : 0) | + (acc & IB_ACCESS_LOCAL_WRITE ? IWCH_MEM_ACCESS_LOCAL_WRITE : 0) | + (acc & IB_ACCESS_MW_BIND ? IWCH_MEM_ACCESS_BINDING : 0) | + IWCH_MEM_ACCESS_LOCAL_READ; +} + +enum iwch_mmid_state { + IWCH_STAG_STATE_VALID, + IWCH_STAG_STATE_INVALID +}; + +enum iwch_qp_query_flags { + IWCH_QP_QUERY_CONTEXT_NONE = 0x0, /* No ctx; Only attrs */ + IWCH_QP_QUERY_CONTEXT_GET = 0x1, /* Get ctx + attrs */ + IWCH_QP_QUERY_CONTEXT_SUSPEND = 0x2, /* Not Supported */ + + /* + * Quiesce QP context; Consumer + * will NOT replay outstanding WR + */ + IWCH_QP_QUERY_CONTEXT_QUIESCE = 0x4, + IWCH_QP_QUERY_CONTEXT_REMOVE = 0x8, + IWCH_QP_QUERY_TEST_USERWRITE = 0x32 /* Test special */ +}; + +int iwch_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, + struct ib_send_wr **bad_wr); +int iwch_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr, + struct ib_recv_wr **bad_wr); +int iwch_bind_mw(struct ib_qp *qp, + struct ib_mw *mw, + struct ib_mw_bind *mw_bind); +int iwch_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *wc); +int iwch_post_terminate(struct iwch_qp *qhp, struct respQ_msg_t *rsp_msg); +int iwch_register_device(struct iwch_dev *dev); +void iwch_unregister_device(struct iwch_dev *dev); +int iwch_quiesce_qps(struct iwch_cq *chp); +int iwch_resume_qps(struct iwch_cq *chp); +void stop_read_rep_timer(struct iwch_qp *qhp); +int iwch_register_mem(struct iwch_dev *rhp, struct iwch_pd *php, + struct iwch_mr *mhp, + int shift, + __be64 *page_list); +int iwch_reregister_mem(struct iwch_dev *rhp, struct iwch_pd *php, + struct iwch_mr *mhp, + int shift, + __be64 *page_list, + int npages); +int build_phys_page_list(struct ib_phys_buf *buffer_list, + int num_phys_buf, + u64 *iova_start, + u64 *total_size, + int *npages, + int *shift, + __be64 **page_list); + + +#define IWCH_NODE_DESC "cxgb3 Chelsio Communications" + +#endif diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c new file mode 100644 index 0000000..e066727 --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c @@ -0,0 +1,1007 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include "iwch_provider.h" +#include "iwch.h" +#include "iwch_cm.h" +#include "cxio_hal.h" + +#define NO_SUPPORT -1 + +static inline int iwch_build_rdma_send(union t3_wr *wqe, struct ib_send_wr *wr, + u8 * flit_cnt) +{ + int i; + u32 plen; + + switch (wr->opcode) { + case IB_WR_SEND: + case IB_WR_SEND_WITH_IMM: + if (wr->send_flags & IB_SEND_SOLICITED) + wqe->send.rdmaop = T3_SEND_WITH_SE; + else + wqe->send.rdmaop = T3_SEND; + wqe->send.rem_stag = 0; + break; +#if 0 /* Not currently supported */ + case TYPE_SEND_INVALIDATE: + case TYPE_SEND_INVALIDATE_IMMEDIATE: + wqe->send.rdmaop = T3_SEND_WITH_INV; + wqe->send.rem_stag = cpu_to_be32(wr->wr.rdma.rkey); + break; + case TYPE_SEND_SE_INVALIDATE: + wqe->send.rdmaop = T3_SEND_WITH_SE_INV; + wqe->send.rem_stag = cpu_to_be32(wr->wr.rdma.rkey); + break; +#endif + default: + break; + } + if (wr->num_sge > T3_MAX_SGE) + return -EINVAL; + wqe->send.reserved[0] = 0; + wqe->send.reserved[1] = 0; + wqe->send.reserved[2] = 0; + if (wr->opcode == IB_WR_SEND_WITH_IMM) { + plen = 4; + wqe->send.sgl[0].stag = wr->imm_data; + wqe->send.sgl[0].len = __constant_cpu_to_be32(0); + wqe->send.num_sgle = __constant_cpu_to_be32(0); + *flit_cnt = 5; + } else { + plen = 0; + for (i = 0; i < wr->num_sge; i++) { + if ((plen + wr->sg_list[i].length) < plen) { + return -EMSGSIZE; + } + plen += wr->sg_list[i].length; + wqe->send.sgl[i].stag = + cpu_to_be32(wr->sg_list[i].lkey); + wqe->send.sgl[i].len = + cpu_to_be32(wr->sg_list[i].length); + wqe->send.sgl[i].to = cpu_to_be64(wr->sg_list[i].addr); + } + wqe->send.num_sgle = cpu_to_be32(wr->num_sge); + *flit_cnt = 4 + ((wr->num_sge) << 1); + } + wqe->send.plen = cpu_to_be32(plen); + return 0; +} + +static inline int iwch_build_rdma_write(union t3_wr *wqe, struct ib_send_wr *wr, + u8 *flit_cnt) +{ + int i; + u32 plen; + if (wr->num_sge > T3_MAX_SGE) + return -EINVAL; + wqe->write.rdmaop = T3_RDMA_WRITE; + wqe->write.reserved[0] = 0; + wqe->write.reserved[1] = 0; + wqe->write.reserved[2] = 0; + wqe->write.stag_sink = cpu_to_be32(wr->wr.rdma.rkey); + wqe->write.to_sink = cpu_to_be64(wr->wr.rdma.remote_addr); + + if (wr->opcode == IB_WR_RDMA_WRITE_WITH_IMM) { + plen = 4; + wqe->write.sgl[0].stag = wr->imm_data; + wqe->write.sgl[0].len = __constant_cpu_to_be32(0); + wqe->write.num_sgle = __constant_cpu_to_be32(0); + *flit_cnt = 6; + } else { + plen = 0; + for (i = 0; i < wr->num_sge; i++) { + if ((plen + wr->sg_list[i].length) < plen) { + return -EMSGSIZE; + } + plen += wr->sg_list[i].length; + wqe->write.sgl[i].stag = + cpu_to_be32(wr->sg_list[i].lkey); + wqe->write.sgl[i].len = + cpu_to_be32(wr->sg_list[i].length); + wqe->write.sgl[i].to = + cpu_to_be64(wr->sg_list[i].addr); + } + wqe->write.num_sgle = cpu_to_be32(wr->num_sge); + *flit_cnt = 5 + ((wr->num_sge) << 1); + } + wqe->write.plen = cpu_to_be32(plen); + return 0; +} + +static inline int iwch_build_rdma_read(union t3_wr *wqe, struct ib_send_wr *wr, + u8 *flit_cnt) +{ + if (wr->num_sge > 1) + return -EINVAL; + wqe->read.rdmaop = T3_READ_REQ; + wqe->read.reserved[0] = 0; + wqe->read.reserved[1] = 0; + wqe->read.reserved[2] = 0; + wqe->read.rem_stag = cpu_to_be32(wr->wr.rdma.rkey); + wqe->read.rem_to = cpu_to_be64(wr->wr.rdma.remote_addr); + wqe->read.local_stag = cpu_to_be32(wr->sg_list[0].lkey); + wqe->read.local_len = cpu_to_be32(wr->sg_list[0].length); + wqe->read.local_to = cpu_to_be64(wr->sg_list[0].addr); + *flit_cnt = sizeof(struct t3_rdma_read_wr) >> 3; + return 0; +} + +/* + * TBD: this is going to be moved to firmware. Missing pdid/qpid check for now. + */ +static inline int iwch_sgl2pbl_map(struct iwch_dev *rhp, + struct ib_sge *sg_list, u32 num_sgle, + u32 * pbl_addr, u8 * page_size) +{ + int i; + struct iwch_mr *mhp; + u32 offset; + for (i = 0; i < num_sgle; i++) { + + mhp = get_mhp(rhp, (sg_list[i].lkey) >> 8); + if (!mhp) { + PDBG("%s %d\n", __FUNCTION__, __LINE__); + return -EIO; + } + if (!mhp->attr.state) { + PDBG("%s %d\n", __FUNCTION__, __LINE__); + return -EIO; + } + if (mhp->attr.zbva) { + PDBG("%s %d\n", __FUNCTION__, __LINE__); + return -EIO; + } + + if (sg_list[i].addr < mhp->attr.va_fbo) { + PDBG("%s %d\n", __FUNCTION__, __LINE__); + return -EINVAL; + } + if (sg_list[i].addr + ((u64) sg_list[i].length) < + sg_list[i].addr) { + PDBG("%s %d\n", __FUNCTION__, __LINE__); + return -EINVAL; + } + if (sg_list[i].addr + ((u64) sg_list[i].length) > + mhp->attr.va_fbo + ((u64) mhp->attr.len)) { + PDBG("%s %d\n", __FUNCTION__, __LINE__); + return -EINVAL; + } + offset = sg_list[i].addr - mhp->attr.va_fbo; + offset += ((u32) mhp->attr.va_fbo) % + (1UL << (12 + mhp->attr.page_size)); + pbl_addr[i] = ((mhp->attr.pbl_addr - + rhp->rdev.rnic_info.pbl_base) >> 3) + + (offset >> (12 + mhp->attr.page_size)); + page_size[i] = mhp->attr.page_size; + } + return 0; +} + +static inline int iwch_build_rdma_recv(struct iwch_dev *rhp, + union t3_wr *wqe, + struct ib_recv_wr *wr) +{ + int i, err = 0; + u32 pbl_addr[4]; + u8 page_size[4]; + if (wr->num_sge > T3_MAX_SGE) + return -EINVAL; + err = iwch_sgl2pbl_map(rhp, wr->sg_list, wr->num_sge, pbl_addr, + page_size); + if (err) + return err; + wqe->recv.pagesz[0] = page_size[0]; + wqe->recv.pagesz[1] = page_size[1]; + wqe->recv.pagesz[2] = page_size[2]; + wqe->recv.pagesz[3] = page_size[3]; + wqe->recv.num_sgle = cpu_to_be32(wr->num_sge); + for (i = 0; i < wr->num_sge; i++) { + wqe->recv.sgl[i].stag = cpu_to_be32(wr->sg_list[i].lkey); + wqe->recv.sgl[i].len = cpu_to_be32(wr->sg_list[i].length); + + /* to in the WQE == the offset into the page */ + wqe->recv.sgl[i].to = cpu_to_be64(((u32) wr->sg_list[i].addr) % + (1UL << (12 + page_size[i]))); + + /* pbl_addr is the adapters address in the PBL */ + wqe->recv.pbl_addr[i] = cpu_to_be32(pbl_addr[i]); + } + for (; i < T3_MAX_SGE; i++) { + wqe->recv.sgl[i].stag = 0; + wqe->recv.sgl[i].len = 0; + wqe->recv.sgl[i].to = 0; + wqe->recv.pbl_addr[i] = 0; + } + return 0; +} + +int iwch_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, + struct ib_send_wr **bad_wr) +{ + int err = 0; + u8 t3_wr_flit_cnt; + enum t3_wr_opcode t3_wr_opcode = 0; + enum t3_wr_flags t3_wr_flags; + struct iwch_qp *qhp; + u32 idx; + union t3_wr *wqe; + u32 num_wrs; + unsigned long flag; + struct t3_swsq *sqp; + + qhp = to_iwch_qp(ibqp); + spin_lock_irqsave(&qhp->lock, flag); + if (qhp->attr.state > IWCH_QP_STATE_RTS) { + spin_unlock_irqrestore(&qhp->lock, flag); + return -EINVAL; + } + num_wrs = Q_FREECNT(qhp->wq.sq_rptr, qhp->wq.sq_wptr, + qhp->wq.sq_size_log2); + if (num_wrs <= 0) { + spin_unlock_irqrestore(&qhp->lock, flag); + return -ENOMEM; + } + while (wr) { + if (num_wrs == 0) { + err = -ENOMEM; + *bad_wr = wr; + break; + } + idx = Q_PTR2IDX(qhp->wq.wptr, qhp->wq.size_log2); + wqe = (union t3_wr *) (qhp->wq.queue + idx); + t3_wr_flags = 0; + if (wr->send_flags & IB_SEND_SOLICITED) + t3_wr_flags |= T3_SOLICITED_EVENT_FLAG; + if (wr->send_flags & IB_SEND_FENCE) + t3_wr_flags |= T3_READ_FENCE_FLAG; + if (wr->send_flags & IB_SEND_SIGNALED) + t3_wr_flags |= T3_COMPLETION_FLAG; + sqp = qhp->wq.sq + + Q_PTR2IDX(qhp->wq.sq_wptr, qhp->wq.sq_size_log2); + switch (wr->opcode) { + case IB_WR_SEND: + case IB_WR_SEND_WITH_IMM: + t3_wr_opcode = T3_WR_SEND; + err = iwch_build_rdma_send(wqe, wr, &t3_wr_flit_cnt); + break; + case IB_WR_RDMA_WRITE: + case IB_WR_RDMA_WRITE_WITH_IMM: + t3_wr_opcode = T3_WR_WRITE; + err = iwch_build_rdma_write(wqe, wr, &t3_wr_flit_cnt); + break; + case IB_WR_RDMA_READ: + t3_wr_opcode = T3_WR_READ; + t3_wr_flags = 0; /* T3 reads are always signaled */ + err = iwch_build_rdma_read(wqe, wr, &t3_wr_flit_cnt); + if (err) + break; + sqp->read_len = wqe->read.local_len; + if (!qhp->wq.oldest_read) + qhp->wq.oldest_read = sqp; + break; + default: + PDBG("%s post of type=%d TBD!\n", __FUNCTION__, + wr->opcode); + err = -EINVAL; + } + if (err) { + *bad_wr = wr; + break; + } + wqe->send.wrid.id0.hi = qhp->wq.sq_wptr; + sqp->wr_id = wr->wr_id; + sqp->opcode = wr2opcode(t3_wr_opcode); + sqp->sq_wptr = qhp->wq.sq_wptr; + sqp->complete = 0; + sqp->signaled = (wr->send_flags & IB_SEND_SIGNALED); + + build_fw_riwrh((void *) wqe, t3_wr_opcode, t3_wr_flags, + Q_GENBIT(qhp->wq.wptr, qhp->wq.size_log2), + 0, t3_wr_flit_cnt); + PDBG("%s cookie 0x%llx wq idx 0x%x swsq idx %ld opcode %d\n", + __FUNCTION__, (unsigned long long) wr->wr_id, idx, + Q_PTR2IDX(qhp->wq.sq_wptr, qhp->wq.sq_size_log2), + sqp->opcode); + wr = wr->next; + num_wrs--; + ++(qhp->wq.wptr); + ++(qhp->wq.sq_wptr); + } + spin_unlock_irqrestore(&qhp->lock, flag); + ring_doorbell(qhp->wq.doorbell, qhp->wq.qpid); + return err; +} + +int iwch_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr, + struct ib_recv_wr **bad_wr) +{ + int err = 0; + struct iwch_qp *qhp; + u32 idx; + union t3_wr *wqe; + u32 num_wrs; + unsigned long flag; + + qhp = to_iwch_qp(ibqp); + spin_lock_irqsave(&qhp->lock, flag); + if (qhp->attr.state > IWCH_QP_STATE_RTS) { + spin_unlock_irqrestore(&qhp->lock, flag); + return -EINVAL; + } + num_wrs = Q_FREECNT(qhp->wq.rq_rptr, qhp->wq.rq_wptr, + qhp->wq.rq_size_log2) - 1; + if (!wr) { + spin_unlock_irqrestore(&qhp->lock, flag); + return -EINVAL; + } + while (wr) { + idx = Q_PTR2IDX(qhp->wq.wptr, qhp->wq.size_log2); + wqe = (union t3_wr *) (qhp->wq.queue + idx); + if (num_wrs) + err = iwch_build_rdma_recv(qhp->rhp, wqe, wr); + else + err = -ENOMEM; + if (err) { + *bad_wr = wr; + break; + } + qhp->wq.rq[Q_PTR2IDX(qhp->wq.rq_wptr, qhp->wq.rq_size_log2)] = + wr->wr_id; + build_fw_riwrh((void *) wqe, T3_WR_RCV, T3_COMPLETION_FLAG, + Q_GENBIT(qhp->wq.wptr, qhp->wq.size_log2), + 0, sizeof(struct t3_receive_wr) >> 3); + PDBG("%s cookie 0x%llx idx 0x%x rq_wptr 0x%x rw_rptr 0x%x " + "wqe %p \n", __FUNCTION__, (unsigned long long) wr->wr_id, + idx, qhp->wq.rq_wptr, qhp->wq.rq_rptr, wqe); + ++(qhp->wq.rq_wptr); + ++(qhp->wq.wptr); + wr = wr->next; + num_wrs--; + } + spin_unlock_irqrestore(&qhp->lock, flag); + ring_doorbell(qhp->wq.doorbell, qhp->wq.qpid); + return err; +} + +int iwch_bind_mw(struct ib_qp *qp, + struct ib_mw *mw, + struct ib_mw_bind *mw_bind) +{ + struct iwch_dev *rhp; + struct iwch_mw *mhp; + struct iwch_qp *qhp; + union t3_wr *wqe; + u32 pbl_addr; + u8 page_size; + u32 num_wrs; + unsigned long flag; + struct ib_sge sgl; + int err=0; + enum t3_wr_flags t3_wr_flags; + u32 idx; + struct t3_swsq *sqp; + + qhp = to_iwch_qp(qp); + mhp = to_iwch_mw(mw); + rhp = qhp->rhp; + + spin_lock_irqsave(&qhp->lock, flag); + if (qhp->attr.state > IWCH_QP_STATE_RTS) { + spin_unlock_irqrestore(&qhp->lock, flag); + return -EINVAL; + } + num_wrs = Q_FREECNT(qhp->wq.sq_rptr, qhp->wq.sq_wptr, + qhp->wq.sq_size_log2); + if ((num_wrs) <= 0) { + spin_unlock_irqrestore(&qhp->lock, flag); + return -ENOMEM; + } + idx = Q_PTR2IDX(qhp->wq.wptr, qhp->wq.size_log2); + PDBG("%s: idx 0x%0x, mw 0x%p, mw_bind 0x%p\n", __FUNCTION__, idx, + mw, mw_bind); + wqe = (union t3_wr *) (qhp->wq.queue + idx); + + t3_wr_flags = 0; + if (mw_bind->send_flags & IB_SEND_SIGNALED) + t3_wr_flags = T3_COMPLETION_FLAG; + + sgl.addr = mw_bind->addr; + sgl.lkey = mw_bind->mr->lkey; + sgl.length = mw_bind->length; + wqe->bind.reserved = 0; + wqe->bind.type = T3_VA_BASED_TO; + + /* TBD: check perms */ + wqe->bind.perms = iwch_convert_access(mw_bind->mw_access_flags); + wqe->bind.mr_stag = cpu_to_be32(mw_bind->mr->lkey); + wqe->bind.mw_stag = cpu_to_be32(mw->rkey); + wqe->bind.mw_len = cpu_to_be32(mw_bind->length); + wqe->bind.mw_va = cpu_to_be64(mw_bind->addr); + err = iwch_sgl2pbl_map(rhp, &sgl, 1, &pbl_addr, &page_size); + if (err) { + spin_unlock_irqrestore(&qhp->lock, flag); + return err; + } + wqe->send.wrid.id0.hi = qhp->wq.sq_wptr; + sqp = qhp->wq.sq + Q_PTR2IDX(qhp->wq.sq_wptr, qhp->wq.sq_size_log2); + sqp->wr_id = mw_bind->wr_id; + sqp->opcode = T3_BIND_MW; + sqp->sq_wptr = qhp->wq.sq_wptr; + sqp->complete = 0; + sqp->signaled = (mw_bind->send_flags & IB_SEND_SIGNALED); + wqe->bind.mr_pbl_addr = cpu_to_be32(pbl_addr); + wqe->bind.mr_pagesz = page_size; + wqe->flit[T3_SQ_COOKIE_FLIT] = mw_bind->wr_id; + build_fw_riwrh((void *)wqe, T3_WR_BIND, t3_wr_flags, + Q_GENBIT(qhp->wq.wptr, qhp->wq.size_log2), 0, + sizeof(struct t3_bind_mw_wr) >> 3); + ++(qhp->wq.wptr); + ++(qhp->wq.sq_wptr); + spin_unlock_irqrestore(&qhp->lock, flag); + + ring_doorbell(qhp->wq.doorbell, qhp->wq.qpid); + + return err; +} + +static inline void build_term_codes(int t3err, u8 *layer_type, u8 *ecode, + int tagged) +{ + switch (t3err) { + case TPT_ERR_STAG: + if (tagged == 1) { + *layer_type = LAYER_DDP|DDP_TAGGED_ERR; + *ecode = DDPT_INV_STAG; + } else if (tagged == 2) { + *layer_type = LAYER_RDMAP|RDMAP_REMOTE_PROT; + *ecode = RDMAP_INV_STAG; + } + break; + case TPT_ERR_PDID: + case TPT_ERR_QPID: + case TPT_ERR_ACCESS: + if (tagged == 1) { + *layer_type = LAYER_DDP|DDP_TAGGED_ERR; + *ecode = DDPT_STAG_NOT_ASSOC; + } else if (tagged == 2) { + *layer_type = LAYER_RDMAP|RDMAP_REMOTE_PROT; + *ecode = RDMAP_STAG_NOT_ASSOC; + } + break; + case TPT_ERR_WRAP: + *layer_type = LAYER_RDMAP|RDMAP_REMOTE_PROT; + *ecode = RDMAP_TO_WRAP; + break; + case TPT_ERR_BOUND: + if (tagged == 1) { + *layer_type = LAYER_DDP|DDP_TAGGED_ERR; + *ecode = DDPT_BASE_BOUNDS; + } else if (tagged == 2) { + *layer_type = LAYER_RDMAP|RDMAP_REMOTE_PROT; + *ecode = RDMAP_BASE_BOUNDS; + } else { + *layer_type = LAYER_DDP|DDP_UNTAGGED_ERR; + *ecode = DDPU_MSG_TOOBIG; + } + break; + case TPT_ERR_INVALIDATE_SHARED_MR: + case TPT_ERR_INVALIDATE_MR_WITH_MW_BOUND: + *layer_type = LAYER_RDMAP|RDMAP_REMOTE_OP; + *ecode = RDMAP_CANT_INV_STAG; + break; + case TPT_ERR_ECC: + case TPT_ERR_ECC_PSTAG: + case TPT_ERR_INTERNAL_ERR: + *layer_type = LAYER_RDMAP|RDMAP_LOCAL_CATA; + *ecode = 0; + break; + case TPT_ERR_OUT_OF_RQE: + *layer_type = LAYER_DDP|DDP_UNTAGGED_ERR; + *ecode = DDPU_INV_MSN_NOBUF; + break; + case TPT_ERR_PBL_ADDR_BOUND: + *layer_type = LAYER_DDP|DDP_TAGGED_ERR; + *ecode = DDPT_BASE_BOUNDS; + break; + case TPT_ERR_CRC: + *layer_type = LAYER_MPA|DDP_LLP; + *ecode = MPA_CRC_ERR; + break; + case TPT_ERR_MARKER: + *layer_type = LAYER_MPA|DDP_LLP; + *ecode = MPA_MARKER_ERR; + break; + case TPT_ERR_PDU_LEN_ERR: + *layer_type = LAYER_DDP|DDP_UNTAGGED_ERR; + *ecode = DDPU_MSG_TOOBIG; + break; + case TPT_ERR_DDP_VERSION: + if (tagged) { + *layer_type = LAYER_DDP|DDP_TAGGED_ERR; + *ecode = DDPT_INV_VERS; + } else { + *layer_type = LAYER_DDP|DDP_UNTAGGED_ERR; + *ecode = DDPU_INV_VERS; + } + break; + case TPT_ERR_RDMA_VERSION: + *layer_type = LAYER_RDMAP|RDMAP_REMOTE_OP; + *ecode = RDMAP_INV_VERS; + break; + case TPT_ERR_OPCODE: + *layer_type = LAYER_RDMAP|RDMAP_REMOTE_OP; + *ecode = RDMAP_INV_OPCODE; + break; + case TPT_ERR_DDP_QUEUE_NUM: + *layer_type = LAYER_DDP|DDP_UNTAGGED_ERR; + *ecode = DDPU_INV_QN; + break; + case TPT_ERR_MSN: + case TPT_ERR_MSN_GAP: + case TPT_ERR_MSN_RANGE: + case TPT_ERR_IRD_OVERFLOW: + *layer_type = LAYER_DDP|DDP_UNTAGGED_ERR; + *ecode = DDPU_INV_MSN_RANGE; + break; + case TPT_ERR_TBIT: + *layer_type = LAYER_DDP|DDP_LOCAL_CATA; + *ecode = 0; + break; + case TPT_ERR_MO: + *layer_type = LAYER_DDP|DDP_UNTAGGED_ERR; + *ecode = DDPU_INV_MO; + break; + default: + *layer_type = LAYER_RDMAP|DDP_LOCAL_CATA; + *ecode = 0; + break; + } +} + +/* + * This posts a TERMINATE with layer=RDMA, type=catastrophic. + */ +int iwch_post_terminate(struct iwch_qp *qhp, struct respQ_msg_t *rsp_msg) +{ + union t3_wr *wqe; + struct terminate_message *term; + int status; + int tagged = 0; + struct sk_buff *skb; + + PDBG("%s %d\n", __FUNCTION__, __LINE__); + skb = alloc_skb(40, GFP_ATOMIC); + if (!skb) { + printk(KERN_ERR "%s cannot send TERMINATE!\n", __FUNCTION__); + return -ENOMEM; + } + wqe = (union t3_wr *)skb_put(skb, 40); + memset(wqe, 0, 40); + wqe->send.rdmaop = T3_TERMINATE; + + /* immediate data length */ + wqe->send.plen = htonl(4); + + /* immediate data starts here. */ + term = (struct terminate_message *)wqe->send.sgl; + if (rsp_msg) { + status = CQE_STATUS(rsp_msg->cqe); + if (CQE_OPCODE(rsp_msg->cqe) == T3_RDMA_WRITE) + tagged = 1; + if ((CQE_OPCODE(rsp_msg->cqe) == T3_READ_REQ) || + (CQE_OPCODE(rsp_msg->cqe) == T3_READ_RESP)) + tagged = 2; + } else { + status = TPT_ERR_INTERNAL_ERR; + } + build_term_codes(status, &term->layer_etype, &term->ecode, tagged); + build_fw_riwrh((void *)wqe, T3_WR_SEND, + T3_COMPLETION_FLAG | T3_NOTIFY_FLAG, 1, + qhp->ep->hwtid, 5); + skb->priority = CPL_PRIORITY_DATA; + return cxgb3_ofld_send(qhp->rhp->rdev.t3cdev_p, skb); +} + +/* + * Assumes qhp lock is held. + */ +static void __flush_qp(struct iwch_qp *qhp, unsigned long *flag) +{ + struct iwch_cq *rchp, *schp; + int count; + + rchp = get_chp(qhp->rhp, qhp->attr.rcq); + schp = get_chp(qhp->rhp, qhp->attr.scq); + + PDBG("%s qhp %p rchp %p schp %p\n", __FUNCTION__, qhp, rchp, schp); + /* take a ref on the qhp since we must release the lock */ + atomic_inc(&qhp->refcnt); + spin_unlock_irqrestore(&qhp->lock, *flag); + + /* locking heirarchy: cq lock first, then qp lock. */ + spin_lock_irqsave(&rchp->lock, *flag); + spin_lock(&qhp->lock); + cxio_flush_hw_cq(&rchp->cq); + cxio_count_rcqes(&rchp->cq, &qhp->wq, &count); + cxio_flush_rq(&qhp->wq, &rchp->cq, count); + spin_unlock(&qhp->lock); + spin_unlock_irqrestore(&rchp->lock, *flag); + + /* locking heirarchy: cq lock first, then qp lock. */ + spin_lock_irqsave(&schp->lock, *flag); + spin_lock(&qhp->lock); + cxio_flush_hw_cq(&schp->cq); + cxio_count_scqes(&schp->cq, &qhp->wq, &count); + cxio_flush_sq(&qhp->wq, &schp->cq, count); + spin_unlock(&qhp->lock); + spin_unlock_irqrestore(&schp->lock, *flag); + + /* deref */ + if (atomic_dec_and_test(&qhp->refcnt)) + wake_up(&qhp->wait); + + spin_lock_irqsave(&qhp->lock, *flag); +} + +static inline void flush_qp(struct iwch_qp *qhp, unsigned long *flag) +{ + if (t3b_device(qhp->rhp)) + cxio_set_wq_in_error(&qhp->wq); + else + __flush_qp(qhp, flag); +} + + +/* + * Return non zero if at least one RECV was pre-posted. + */ +static inline int rqes_posted(struct iwch_qp *qhp) +{ + return fw_riwrh_opcode((struct fw_riwrh *)qhp->wq.queue) == T3_WR_RCV; +} + +static int rdma_init(struct iwch_dev *rhp, struct iwch_qp *qhp, + enum iwch_qp_attr_mask mask, + struct iwch_qp_attributes *attrs) +{ + struct t3_rdma_init_attr init_attr; + int ret; + + init_attr.tid = qhp->ep->hwtid; + init_attr.qpid = qhp->wq.qpid; + init_attr.pdid = qhp->attr.pd; + init_attr.scqid = qhp->attr.scq; + init_attr.rcqid = qhp->attr.rcq; + init_attr.rq_addr = qhp->wq.rq_addr; + init_attr.rq_size = 1 << qhp->wq.rq_size_log2; + init_attr.mpaattrs = uP_RI_MPA_IETF_ENABLE | + qhp->attr.mpa_attr.recv_marker_enabled | + (qhp->attr.mpa_attr.xmit_marker_enabled << 1) | + (qhp->attr.mpa_attr.crc_enabled << 2); + + /* + * XXX - The IWCM doesn't quite handle getting these + * attrs set before going into RTS. For now, just turn + * them on always... + */ +#if 0 + init_attr.qpcaps = qhp->attr.enableRdmaRead | + (qhp->attr.enableRdmaWrite << 1) | + (qhp->attr.enableBind << 2) | + (qhp->attr.enable_stag0_fastreg << 3) | + (qhp->attr.enable_stag0_fastreg << 4); +#else + init_attr.qpcaps = 0x1f; +#endif + init_attr.tcp_emss = qhp->ep->emss; + init_attr.ord = qhp->attr.max_ord; + init_attr.ird = qhp->attr.max_ird; + init_attr.qp_dma_addr = qhp->wq.dma_addr; + init_attr.qp_dma_size = (1UL << qhp->wq.size_log2); + init_attr.flags = rqes_posted(qhp) ? RECVS_POSTED : 0; + PDBG("%s init_attr.rq_addr 0x%x init_attr.rq_size = %d " + "flags 0x%x qpcaps 0x%x\n", __FUNCTION__, + init_attr.rq_addr, init_attr.rq_size, + init_attr.flags, init_attr.qpcaps); + ret = cxio_rdma_init(&rhp->rdev, &init_attr); + PDBG("%s ret %d\n", __FUNCTION__, ret); + return ret; +} + +int iwch_modify_qp(struct iwch_dev *rhp, struct iwch_qp *qhp, + enum iwch_qp_attr_mask mask, + struct iwch_qp_attributes *attrs, + int internal) +{ + int ret = 0; + struct iwch_qp_attributes newattr = qhp->attr; + unsigned long flag; + int disconnect = 0; + int terminate = 0; + int abort = 0; + int free = 0; + struct iwch_ep *ep = NULL; + + PDBG("%s qhp %p qpid 0x%x ep %p state %d -> %d\n", __FUNCTION__, + qhp, qhp->wq.qpid, qhp->ep, qhp->attr.state, + (mask & IWCH_QP_ATTR_NEXT_STATE) ? attrs->next_state : -1); + + spin_lock_irqsave(&qhp->lock, flag); + + /* Process attr changes if in IDLE */ + if (mask & IWCH_QP_ATTR_VALID_MODIFY) { + if (qhp->attr.state != IWCH_QP_STATE_IDLE) { + ret = -EIO; + goto out; + } + if (mask & IWCH_QP_ATTR_ENABLE_RDMA_READ) + newattr.enable_rdma_read = attrs->enable_rdma_read; + if (mask & IWCH_QP_ATTR_ENABLE_RDMA_WRITE) + newattr.enable_rdma_write = attrs->enable_rdma_write; + if (mask & IWCH_QP_ATTR_ENABLE_RDMA_BIND) + newattr.enable_bind = attrs->enable_bind; + if (mask & IWCH_QP_ATTR_MAX_ORD) { + if (attrs->max_ord > + rhp->attr.max_rdma_read_qp_depth) { + ret = -EINVAL; + goto out; + } + newattr.max_ord = attrs->max_ord; + } + if (mask & IWCH_QP_ATTR_MAX_IRD) { + if (attrs->max_ird > + rhp->attr.max_rdma_reads_per_qp) { + ret = -EINVAL; + goto out; + } + newattr.max_ird = attrs->max_ird; + } + qhp->attr = newattr; + } + + if (!(mask & IWCH_QP_ATTR_NEXT_STATE)) + goto out; + if (qhp->attr.state == attrs->next_state) + goto out; + + switch (qhp->attr.state) { + case IWCH_QP_STATE_IDLE: + switch (attrs->next_state) { + case IWCH_QP_STATE_RTS: + if (!(mask & IWCH_QP_ATTR_LLP_STREAM_HANDLE)) { + ret = -EINVAL; + goto out; + } + if (!(mask & IWCH_QP_ATTR_MPA_ATTR)) { + ret = -EINVAL; + goto out; + } + qhp->attr.mpa_attr = attrs->mpa_attr; + qhp->attr.llp_stream_handle = attrs->llp_stream_handle; + qhp->ep = qhp->attr.llp_stream_handle; + qhp->attr.state = IWCH_QP_STATE_RTS; + + /* + * Ref the endpoint here and deref when we + * disassociate the endpoint from the QP. This + * happens in CLOSING->IDLE transition or *->ERROR + * transition. + */ + get_ep(&qhp->ep->com); + spin_unlock_irqrestore(&qhp->lock, flag); + ret = rdma_init(rhp, qhp, mask, attrs); + spin_lock_irqsave(&qhp->lock, flag); + if (ret) + goto err; + break; + case IWCH_QP_STATE_ERROR: + qhp->attr.state = IWCH_QP_STATE_ERROR; + flush_qp(qhp, &flag); + break; + default: + ret = -EINVAL; + goto out; + } + break; + case IWCH_QP_STATE_RTS: + switch (attrs->next_state) { + case IWCH_QP_STATE_CLOSING: + BUG_ON(atomic_read(&qhp->ep->com.kref.refcount) < 2); + qhp->attr.state = IWCH_QP_STATE_CLOSING; + if (!internal) { + abort=0; + disconnect = 1; + ep = qhp->ep; + } + break; + case IWCH_QP_STATE_TERMINATE: + qhp->attr.state = IWCH_QP_STATE_TERMINATE; + if (!internal) + terminate = 1; + break; + case IWCH_QP_STATE_ERROR: + qhp->attr.state = IWCH_QP_STATE_ERROR; + if (!internal) { + abort=1; + disconnect = 1; + ep = qhp->ep; + } + goto err; + break; + default: + ret = -EINVAL; + goto out; + } + break; + case IWCH_QP_STATE_CLOSING: + if (!internal) { + ret = -EINVAL; + goto out; + } + switch (attrs->next_state) { + case IWCH_QP_STATE_IDLE: + qhp->attr.state = IWCH_QP_STATE_IDLE; + qhp->attr.llp_stream_handle = NULL; + put_ep(&qhp->ep->com); + qhp->ep = NULL; + wake_up(&qhp->wait); + break; + case IWCH_QP_STATE_ERROR: + goto err; + default: + ret = -EINVAL; + goto err; + } + break; + case IWCH_QP_STATE_ERROR: + if (attrs->next_state != IWCH_QP_STATE_IDLE) { + ret = -EINVAL; + goto out; + } + + if (!Q_EMPTY(qhp->wq.sq_rptr, qhp->wq.sq_wptr) || + !Q_EMPTY(qhp->wq.rq_rptr, qhp->wq.rq_wptr)) { + ret = -EINVAL; + goto out; + } + qhp->attr.state = IWCH_QP_STATE_IDLE; + memset(&qhp->attr, 0, sizeof(qhp->attr)); + break; + case IWCH_QP_STATE_TERMINATE: + if (!internal) { + ret = -EINVAL; + goto out; + } + goto err; + break; + default: + printk(KERN_ERR "%s in a bad state %d\n", + __FUNCTION__, qhp->attr.state); + ret = -EINVAL; + goto err; + break; + } + goto out; +err: + PDBG("%s disassociating ep %p qpid 0x%x\n", __FUNCTION__, qhp->ep, + qhp->wq.qpid); + + /* disassociate the LLP connection */ + qhp->attr.llp_stream_handle = NULL; + ep = qhp->ep; + qhp->ep = NULL; + qhp->attr.state = IWCH_QP_STATE_ERROR; + free=1; + wake_up(&qhp->wait); + BUG_ON(!ep); + flush_qp(qhp, &flag); +out: + spin_unlock_irqrestore(&qhp->lock, flag); + + if (terminate) + iwch_post_terminate(qhp, NULL); + + /* + * If disconnect is 1, then we need to initiate a disconnect + * on the EP. This can be a normal close (RTS->CLOSING) or + * an abnormal close (RTS/CLOSING->ERROR). + */ + if (disconnect) + iwch_ep_disconnect(ep, abort, GFP_KERNEL); + + /* + * If free is 1, then we've disassociated the EP from the QP + * and we need to dereference the EP. + */ + if (free) + put_ep(&ep->com); + + PDBG("%s exit state %d\n", __FUNCTION__, qhp->attr.state); + return ret; +} + +static int quiesce_qp(struct iwch_qp *qhp) +{ + spin_lock_irq(&qhp->lock); + iwch_quiesce_tid(qhp->ep); + qhp->flags |= QP_QUIESCED; + spin_unlock_irq(&qhp->lock); + return 0; +} + +static int resume_qp(struct iwch_qp *qhp) +{ + spin_lock_irq(&qhp->lock); + iwch_resume_tid(qhp->ep); + qhp->flags &= ~QP_QUIESCED; + spin_unlock_irq(&qhp->lock); + return 0; +} + +int iwch_quiesce_qps(struct iwch_cq *chp) +{ + int i; + struct iwch_qp *qhp; + + for (i=0; i < T3_MAX_NUM_QP; i++) { + qhp = get_qhp(chp->rhp, i); + if (!qhp) + continue; + if ((qhp->attr.rcq == chp->cq.cqid) && !qp_quiesced(qhp)) { + quiesce_qp(qhp); + continue; + } + if ((qhp->attr.scq == chp->cq.cqid) && !qp_quiesced(qhp)) + quiesce_qp(qhp); + } + return 0; +} + +int iwch_resume_qps(struct iwch_cq *chp) +{ + int i; + struct iwch_qp *qhp; + + for (i=0; i < T3_MAX_NUM_QP; i++) { + qhp = get_qhp(chp->rhp, i); + if (!qhp) + continue; + if ((qhp->attr.rcq == chp->cq.cqid) && qp_quiesced(qhp)) { + resume_qp(qhp); + continue; + } + if ((qhp->attr.scq == chp->cq.cqid) && qp_quiesced(qhp)) + resume_qp(qhp); + } + return 0; +} diff --git a/drivers/infiniband/hw/cxgb3/iwch_user.h b/drivers/infiniband/hw/cxgb3/iwch_user.h new file mode 100644 index 0000000..c4e7fbe --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/iwch_user.h @@ -0,0 +1,67 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef __IWCH_USER_H__ +#define __IWCH_USER_H__ + +#define IWCH_UVERBS_ABI_VERSION 1 + +/* + * Make sure that all structs defined in this file remain laid out so + * that they pack the same way on 32-bit and 64-bit architectures (to + * avoid incompatibility between 32-bit userspace and 64-bit kernels). + * In particular do not use pointer types -- pass pointers in __u64 + * instead. + */ +struct iwch_create_cq_req { + __u64 user_rptr_addr; +}; + +struct iwch_create_cq_resp { + __u64 key; + __u32 cqid; + __u32 size_log2; +}; + +struct iwch_create_qp_resp { + __u64 key; + __u64 db_key; + __u32 qpid; + __u32 size_log2; + __u32 sq_size_log2; + __u32 rq_size_log2; +}; + +struct iwch_reg_user_mr_resp { + __u32 pbl_addr; +}; +#endif diff --git a/drivers/infiniband/hw/cxgb3/tcb.h b/drivers/infiniband/hw/cxgb3/tcb.h new file mode 100644 index 0000000..c702dc1 --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/tcb.h @@ -0,0 +1,632 @@ +/* + * Copyright (c) 2007 Chelsio, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _TCB_DEFS_H +#define _TCB_DEFS_H + +#define W_TCB_T_STATE 0 +#define S_TCB_T_STATE 0 +#define M_TCB_T_STATE 0xfULL +#define V_TCB_T_STATE(x) ((x) << S_TCB_T_STATE) + +#define W_TCB_TIMER 0 +#define S_TCB_TIMER 4 +#define M_TCB_TIMER 0x1ULL +#define V_TCB_TIMER(x) ((x) << S_TCB_TIMER) + +#define W_TCB_DACK_TIMER 0 +#define S_TCB_DACK_TIMER 5 +#define M_TCB_DACK_TIMER 0x1ULL +#define V_TCB_DACK_TIMER(x) ((x) << S_TCB_DACK_TIMER) + +#define W_TCB_DEL_FLAG 0 +#define S_TCB_DEL_FLAG 6 +#define M_TCB_DEL_FLAG 0x1ULL +#define V_TCB_DEL_FLAG(x) ((x) << S_TCB_DEL_FLAG) + +#define W_TCB_L2T_IX 0 +#define S_TCB_L2T_IX 7 +#define M_TCB_L2T_IX 0x7ffULL +#define V_TCB_L2T_IX(x) ((x) << S_TCB_L2T_IX) + +#define W_TCB_SMAC_SEL 0 +#define S_TCB_SMAC_SEL 18 +#define M_TCB_SMAC_SEL 0x3ULL +#define V_TCB_SMAC_SEL(x) ((x) << S_TCB_SMAC_SEL) + +#define W_TCB_TOS 0 +#define S_TCB_TOS 20 +#define M_TCB_TOS 0x3fULL +#define V_TCB_TOS(x) ((x) << S_TCB_TOS) + +#define W_TCB_MAX_RT 0 +#define S_TCB_MAX_RT 26 +#define M_TCB_MAX_RT 0xfULL +#define V_TCB_MAX_RT(x) ((x) << S_TCB_MAX_RT) + +#define W_TCB_T_RXTSHIFT 0 +#define S_TCB_T_RXTSHIFT 30 +#define M_TCB_T_RXTSHIFT 0xfULL +#define V_TCB_T_RXTSHIFT(x) ((x) << S_TCB_T_RXTSHIFT) + +#define W_TCB_T_DUPACKS 1 +#define S_TCB_T_DUPACKS 2 +#define M_TCB_T_DUPACKS 0xfULL +#define V_TCB_T_DUPACKS(x) ((x) << S_TCB_T_DUPACKS) + +#define W_TCB_T_MAXSEG 1 +#define S_TCB_T_MAXSEG 6 +#define M_TCB_T_MAXSEG 0xfULL +#define V_TCB_T_MAXSEG(x) ((x) << S_TCB_T_MAXSEG) + +#define W_TCB_T_FLAGS1 1 +#define S_TCB_T_FLAGS1 10 +#define M_TCB_T_FLAGS1 0xffffffffULL +#define V_TCB_T_FLAGS1(x) ((x) << S_TCB_T_FLAGS1) + +#define W_TCB_T_MIGRATION 1 +#define S_TCB_T_MIGRATION 20 +#define M_TCB_T_MIGRATION 0x1ULL +#define V_TCB_T_MIGRATION(x) ((x) << S_TCB_T_MIGRATION) + +#define W_TCB_T_FLAGS2 2 +#define S_TCB_T_FLAGS2 10 +#define M_TCB_T_FLAGS2 0x7fULL +#define V_TCB_T_FLAGS2(x) ((x) << S_TCB_T_FLAGS2) + +#define W_TCB_SND_SCALE 2 +#define S_TCB_SND_SCALE 17 +#define M_TCB_SND_SCALE 0xfULL +#define V_TCB_SND_SCALE(x) ((x) << S_TCB_SND_SCALE) + +#define W_TCB_RCV_SCALE 2 +#define S_TCB_RCV_SCALE 21 +#define M_TCB_RCV_SCALE 0xfULL +#define V_TCB_RCV_SCALE(x) ((x) << S_TCB_RCV_SCALE) + +#define W_TCB_SND_UNA_RAW 2 +#define S_TCB_SND_UNA_RAW 25 +#define M_TCB_SND_UNA_RAW 0x7ffffffULL +#define V_TCB_SND_UNA_RAW(x) ((x) << S_TCB_SND_UNA_RAW) + +#define W_TCB_SND_NXT_RAW 3 +#define S_TCB_SND_NXT_RAW 20 +#define M_TCB_SND_NXT_RAW 0x7ffffffULL +#define V_TCB_SND_NXT_RAW(x) ((x) << S_TCB_SND_NXT_RAW) + +#define W_TCB_RCV_NXT 4 +#define S_TCB_RCV_NXT 15 +#define M_TCB_RCV_NXT 0xffffffffULL +#define V_TCB_RCV_NXT(x) ((x) << S_TCB_RCV_NXT) + +#define W_TCB_RCV_ADV 5 +#define S_TCB_RCV_ADV 15 +#define M_TCB_RCV_ADV 0xffffULL +#define V_TCB_RCV_ADV(x) ((x) << S_TCB_RCV_ADV) + +#define W_TCB_SND_MAX_RAW 5 +#define S_TCB_SND_MAX_RAW 31 +#define M_TCB_SND_MAX_RAW 0x7ffffffULL +#define V_TCB_SND_MAX_RAW(x) ((x) << S_TCB_SND_MAX_RAW) + +#define W_TCB_SND_CWND 6 +#define S_TCB_SND_CWND 26 +#define M_TCB_SND_CWND 0x7ffffffULL +#define V_TCB_SND_CWND(x) ((x) << S_TCB_SND_CWND) + +#define W_TCB_SND_SSTHRESH 7 +#define S_TCB_SND_SSTHRESH 21 +#define M_TCB_SND_SSTHRESH 0x7ffffffULL +#define V_TCB_SND_SSTHRESH(x) ((x) << S_TCB_SND_SSTHRESH) + +#define W_TCB_T_RTT_TS_RECENT_AGE 8 +#define S_TCB_T_RTT_TS_RECENT_AGE 16 +#define M_TCB_T_RTT_TS_RECENT_AGE 0xffffffffULL +#define V_TCB_T_RTT_TS_RECENT_AGE(x) ((x) << S_TCB_T_RTT_TS_RECENT_AGE) + +#define W_TCB_T_RTSEQ_RECENT 9 +#define S_TCB_T_RTSEQ_RECENT 16 +#define M_TCB_T_RTSEQ_RECENT 0xffffffffULL +#define V_TCB_T_RTSEQ_RECENT(x) ((x) << S_TCB_T_RTSEQ_RECENT) + +#define W_TCB_T_SRTT 10 +#define S_TCB_T_SRTT 16 +#define M_TCB_T_SRTT 0xffffULL +#define V_TCB_T_SRTT(x) ((x) << S_TCB_T_SRTT) + +#define W_TCB_T_RTTVAR 11 +#define S_TCB_T_RTTVAR 0 +#define M_TCB_T_RTTVAR 0xffffULL +#define V_TCB_T_RTTVAR(x) ((x) << S_TCB_T_RTTVAR) + +#define W_TCB_TS_LAST_ACK_SENT_RAW 11 +#define S_TCB_TS_LAST_ACK_SENT_RAW 16 +#define M_TCB_TS_LAST_ACK_SENT_RAW 0x7ffffffULL +#define V_TCB_TS_LAST_ACK_SENT_RAW(x) ((x) << S_TCB_TS_LAST_ACK_SENT_RAW) + +#define W_TCB_DIP 12 +#define S_TCB_DIP 11 +#define M_TCB_DIP 0xffffffffULL +#define V_TCB_DIP(x) ((x) << S_TCB_DIP) + +#define W_TCB_SIP 13 +#define S_TCB_SIP 11 +#define M_TCB_SIP 0xffffffffULL +#define V_TCB_SIP(x) ((x) << S_TCB_SIP) + +#define W_TCB_DP 14 +#define S_TCB_DP 11 +#define M_TCB_DP 0xffffULL +#define V_TCB_DP(x) ((x) << S_TCB_DP) + +#define W_TCB_SP 14 +#define S_TCB_SP 27 +#define M_TCB_SP 0xffffULL +#define V_TCB_SP(x) ((x) << S_TCB_SP) + +#define W_TCB_TIMESTAMP 15 +#define S_TCB_TIMESTAMP 11 +#define M_TCB_TIMESTAMP 0xffffffffULL +#define V_TCB_TIMESTAMP(x) ((x) << S_TCB_TIMESTAMP) + +#define W_TCB_TIMESTAMP_OFFSET 16 +#define S_TCB_TIMESTAMP_OFFSET 11 +#define M_TCB_TIMESTAMP_OFFSET 0xfULL +#define V_TCB_TIMESTAMP_OFFSET(x) ((x) << S_TCB_TIMESTAMP_OFFSET) + +#define W_TCB_TX_MAX 16 +#define S_TCB_TX_MAX 15 +#define M_TCB_TX_MAX 0xffffffffULL +#define V_TCB_TX_MAX(x) ((x) << S_TCB_TX_MAX) + +#define W_TCB_TX_HDR_PTR_RAW 17 +#define S_TCB_TX_HDR_PTR_RAW 15 +#define M_TCB_TX_HDR_PTR_RAW 0x1ffffULL +#define V_TCB_TX_HDR_PTR_RAW(x) ((x) << S_TCB_TX_HDR_PTR_RAW) + +#define W_TCB_TX_LAST_PTR_RAW 18 +#define S_TCB_TX_LAST_PTR_RAW 0 +#define M_TCB_TX_LAST_PTR_RAW 0x1ffffULL +#define V_TCB_TX_LAST_PTR_RAW(x) ((x) << S_TCB_TX_LAST_PTR_RAW) + +#define W_TCB_TX_COMPACT 18 +#define S_TCB_TX_COMPACT 17 +#define M_TCB_TX_COMPACT 0x1ULL +#define V_TCB_TX_COMPACT(x) ((x) << S_TCB_TX_COMPACT) + +#define W_TCB_RX_COMPACT 18 +#define S_TCB_RX_COMPACT 18 +#define M_TCB_RX_COMPACT 0x1ULL +#define V_TCB_RX_COMPACT(x) ((x) << S_TCB_RX_COMPACT) + +#define W_TCB_RCV_WND 18 +#define S_TCB_RCV_WND 19 +#define M_TCB_RCV_WND 0x7ffffffULL +#define V_TCB_RCV_WND(x) ((x) << S_TCB_RCV_WND) + +#define W_TCB_RX_HDR_OFFSET 19 +#define S_TCB_RX_HDR_OFFSET 14 +#define M_TCB_RX_HDR_OFFSET 0x7ffffffULL +#define V_TCB_RX_HDR_OFFSET(x) ((x) << S_TCB_RX_HDR_OFFSET) + +#define W_TCB_RX_FRAG0_START_IDX_RAW 20 +#define S_TCB_RX_FRAG0_START_IDX_RAW 9 +#define M_TCB_RX_FRAG0_START_IDX_RAW 0x7ffffffULL +#define V_TCB_RX_FRAG0_START_IDX_RAW(x) ((x) << S_TCB_RX_FRAG0_START_IDX_RAW) + +#define W_TCB_RX_FRAG1_START_IDX_OFFSET 21 +#define S_TCB_RX_FRAG1_START_IDX_OFFSET 4 +#define M_TCB_RX_FRAG1_START_IDX_OFFSET 0x7ffffffULL +#define V_TCB_RX_FRAG1_START_IDX_OFFSET(x) ((x) << S_TCB_RX_FRAG1_START_IDX_OFFSET) + +#define W_TCB_RX_FRAG0_LEN 21 +#define S_TCB_RX_FRAG0_LEN 31 +#define M_TCB_RX_FRAG0_LEN 0x7ffffffULL +#define V_TCB_RX_FRAG0_LEN(x) ((x) << S_TCB_RX_FRAG0_LEN) + +#define W_TCB_RX_FRAG1_LEN 22 +#define S_TCB_RX_FRAG1_LEN 26 +#define M_TCB_RX_FRAG1_LEN 0x7ffffffULL +#define V_TCB_RX_FRAG1_LEN(x) ((x) << S_TCB_RX_FRAG1_LEN) + +#define W_TCB_NEWRENO_RECOVER 23 +#define S_TCB_NEWRENO_RECOVER 21 +#define M_TCB_NEWRENO_RECOVER 0x7ffffffULL +#define V_TCB_NEWRENO_RECOVER(x) ((x) << S_TCB_NEWRENO_RECOVER) + +#define W_TCB_PDU_HAVE_LEN 24 +#define S_TCB_PDU_HAVE_LEN 16 +#define M_TCB_PDU_HAVE_LEN 0x1ULL +#define V_TCB_PDU_HAVE_LEN(x) ((x) << S_TCB_PDU_HAVE_LEN) + +#define W_TCB_PDU_LEN 24 +#define S_TCB_PDU_LEN 17 +#define M_TCB_PDU_LEN 0xffffULL +#define V_TCB_PDU_LEN(x) ((x) << S_TCB_PDU_LEN) + +#define W_TCB_RX_QUIESCE 25 +#define S_TCB_RX_QUIESCE 1 +#define M_TCB_RX_QUIESCE 0x1ULL +#define V_TCB_RX_QUIESCE(x) ((x) << S_TCB_RX_QUIESCE) + +#define W_TCB_RX_PTR_RAW 25 +#define S_TCB_RX_PTR_RAW 2 +#define M_TCB_RX_PTR_RAW 0x1ffffULL +#define V_TCB_RX_PTR_RAW(x) ((x) << S_TCB_RX_PTR_RAW) + +#define W_TCB_CPU_NO 25 +#define S_TCB_CPU_NO 19 +#define M_TCB_CPU_NO 0x7fULL +#define V_TCB_CPU_NO(x) ((x) << S_TCB_CPU_NO) + +#define W_TCB_ULP_TYPE 25 +#define S_TCB_ULP_TYPE 26 +#define M_TCB_ULP_TYPE 0xfULL +#define V_TCB_ULP_TYPE(x) ((x) << S_TCB_ULP_TYPE) + +#define W_TCB_RX_FRAG1_PTR_RAW 25 +#define S_TCB_RX_FRAG1_PTR_RAW 30 +#define M_TCB_RX_FRAG1_PTR_RAW 0x1ffffULL +#define V_TCB_RX_FRAG1_PTR_RAW(x) ((x) << S_TCB_RX_FRAG1_PTR_RAW) + +#define W_TCB_RX_FRAG2_START_IDX_OFFSET_RAW 26 +#define S_TCB_RX_FRAG2_START_IDX_OFFSET_RAW 15 +#define M_TCB_RX_FRAG2_START_IDX_OFFSET_RAW 0x7ffffffULL +#define V_TCB_RX_FRAG2_START_IDX_OFFSET_RAW(x) ((x) << S_TCB_RX_FRAG2_START_IDX_OFFSET_RAW) + +#define W_TCB_RX_FRAG2_PTR_RAW 27 +#define S_TCB_RX_FRAG2_PTR_RAW 10 +#define M_TCB_RX_FRAG2_PTR_RAW 0x1ffffULL +#define V_TCB_RX_FRAG2_PTR_RAW(x) ((x) << S_TCB_RX_FRAG2_PTR_RAW) + +#define W_TCB_RX_FRAG2_LEN_RAW 27 +#define S_TCB_RX_FRAG2_LEN_RAW 27 +#define M_TCB_RX_FRAG2_LEN_RAW 0x7ffffffULL +#define V_TCB_RX_FRAG2_LEN_RAW(x) ((x) << S_TCB_RX_FRAG2_LEN_RAW) + +#define W_TCB_RX_FRAG3_PTR_RAW 28 +#define S_TCB_RX_FRAG3_PTR_RAW 22 +#define M_TCB_RX_FRAG3_PTR_RAW 0x1ffffULL +#define V_TCB_RX_FRAG3_PTR_RAW(x) ((x) << S_TCB_RX_FRAG3_PTR_RAW) + +#define W_TCB_RX_FRAG3_LEN_RAW 29 +#define S_TCB_RX_FRAG3_LEN_RAW 7 +#define M_TCB_RX_FRAG3_LEN_RAW 0x7ffffffULL +#define V_TCB_RX_FRAG3_LEN_RAW(x) ((x) << S_TCB_RX_FRAG3_LEN_RAW) + +#define W_TCB_RX_FRAG3_START_IDX_OFFSET_RAW 30 +#define S_TCB_RX_FRAG3_START_IDX_OFFSET_RAW 2 +#define M_TCB_RX_FRAG3_START_IDX_OFFSET_RAW 0x7ffffffULL +#define V_TCB_RX_FRAG3_START_IDX_OFFSET_RAW(x) ((x) << S_TCB_RX_FRAG3_START_IDX_OFFSET_RAW) + +#define W_TCB_PDU_HDR_LEN 30 +#define S_TCB_PDU_HDR_LEN 29 +#define M_TCB_PDU_HDR_LEN 0xffULL +#define V_TCB_PDU_HDR_LEN(x) ((x) << S_TCB_PDU_HDR_LEN) + +#define W_TCB_SLUSH1 31 +#define S_TCB_SLUSH1 5 +#define M_TCB_SLUSH1 0x7ffffULL +#define V_TCB_SLUSH1(x) ((x) << S_TCB_SLUSH1) + +#define W_TCB_ULP_RAW 31 +#define S_TCB_ULP_RAW 24 +#define M_TCB_ULP_RAW 0xffULL +#define V_TCB_ULP_RAW(x) ((x) << S_TCB_ULP_RAW) + +#define W_TCB_DDP_RDMAP_VERSION 25 +#define S_TCB_DDP_RDMAP_VERSION 30 +#define M_TCB_DDP_RDMAP_VERSION 0x1ULL +#define V_TCB_DDP_RDMAP_VERSION(x) ((x) << S_TCB_DDP_RDMAP_VERSION) + +#define W_TCB_MARKER_ENABLE_RX 25 +#define S_TCB_MARKER_ENABLE_RX 31 +#define M_TCB_MARKER_ENABLE_RX 0x1ULL +#define V_TCB_MARKER_ENABLE_RX(x) ((x) << S_TCB_MARKER_ENABLE_RX) + +#define W_TCB_MARKER_ENABLE_TX 26 +#define S_TCB_MARKER_ENABLE_TX 0 +#define M_TCB_MARKER_ENABLE_TX 0x1ULL +#define V_TCB_MARKER_ENABLE_TX(x) ((x) << S_TCB_MARKER_ENABLE_TX) + +#define W_TCB_CRC_ENABLE 26 +#define S_TCB_CRC_ENABLE 1 +#define M_TCB_CRC_ENABLE 0x1ULL +#define V_TCB_CRC_ENABLE(x) ((x) << S_TCB_CRC_ENABLE) + +#define W_TCB_IRS_ULP 26 +#define S_TCB_IRS_ULP 2 +#define M_TCB_IRS_ULP 0x1ffULL +#define V_TCB_IRS_ULP(x) ((x) << S_TCB_IRS_ULP) + +#define W_TCB_ISS_ULP 26 +#define S_TCB_ISS_ULP 11 +#define M_TCB_ISS_ULP 0x1ffULL +#define V_TCB_ISS_ULP(x) ((x) << S_TCB_ISS_ULP) + +#define W_TCB_TX_PDU_LEN 26 +#define S_TCB_TX_PDU_LEN 20 +#define M_TCB_TX_PDU_LEN 0x3fffULL +#define V_TCB_TX_PDU_LEN(x) ((x) << S_TCB_TX_PDU_LEN) + +#define W_TCB_TX_PDU_OUT 27 +#define S_TCB_TX_PDU_OUT 2 +#define M_TCB_TX_PDU_OUT 0x1ULL +#define V_TCB_TX_PDU_OUT(x) ((x) << S_TCB_TX_PDU_OUT) + +#define W_TCB_CQ_IDX_SQ 27 +#define S_TCB_CQ_IDX_SQ 3 +#define M_TCB_CQ_IDX_SQ 0xffffULL +#define V_TCB_CQ_IDX_SQ(x) ((x) << S_TCB_CQ_IDX_SQ) + +#define W_TCB_CQ_IDX_RQ 27 +#define S_TCB_CQ_IDX_RQ 19 +#define M_TCB_CQ_IDX_RQ 0xffffULL +#define V_TCB_CQ_IDX_RQ(x) ((x) << S_TCB_CQ_IDX_RQ) + +#define W_TCB_QP_ID 28 +#define S_TCB_QP_ID 3 +#define M_TCB_QP_ID 0xffffULL +#define V_TCB_QP_ID(x) ((x) << S_TCB_QP_ID) + +#define W_TCB_PD_ID 28 +#define S_TCB_PD_ID 19 +#define M_TCB_PD_ID 0xffffULL +#define V_TCB_PD_ID(x) ((x) << S_TCB_PD_ID) + +#define W_TCB_STAG 29 +#define S_TCB_STAG 3 +#define M_TCB_STAG 0xffffffffULL +#define V_TCB_STAG(x) ((x) << S_TCB_STAG) + +#define W_TCB_RQ_START 30 +#define S_TCB_RQ_START 3 +#define M_TCB_RQ_START 0x3ffffffULL +#define V_TCB_RQ_START(x) ((x) << S_TCB_RQ_START) + +#define W_TCB_RQ_MSN 30 +#define S_TCB_RQ_MSN 29 +#define M_TCB_RQ_MSN 0x3ffULL +#define V_TCB_RQ_MSN(x) ((x) << S_TCB_RQ_MSN) + +#define W_TCB_RQ_MAX_OFFSET 31 +#define S_TCB_RQ_MAX_OFFSET 7 +#define M_TCB_RQ_MAX_OFFSET 0xfULL +#define V_TCB_RQ_MAX_OFFSET(x) ((x) << S_TCB_RQ_MAX_OFFSET) + +#define W_TCB_RQ_WRITE_PTR 31 +#define S_TCB_RQ_WRITE_PTR 11 +#define M_TCB_RQ_WRITE_PTR 0x3ffULL +#define V_TCB_RQ_WRITE_PTR(x) ((x) << S_TCB_RQ_WRITE_PTR) + +#define W_TCB_INB_WRITE_PERM 31 +#define S_TCB_INB_WRITE_PERM 21 +#define M_TCB_INB_WRITE_PERM 0x1ULL +#define V_TCB_INB_WRITE_PERM(x) ((x) << S_TCB_INB_WRITE_PERM) + +#define W_TCB_INB_READ_PERM 31 +#define S_TCB_INB_READ_PERM 22 +#define M_TCB_INB_READ_PERM 0x1ULL +#define V_TCB_INB_READ_PERM(x) ((x) << S_TCB_INB_READ_PERM) + +#define W_TCB_ORD_L_BIT_VLD 31 +#define S_TCB_ORD_L_BIT_VLD 23 +#define M_TCB_ORD_L_BIT_VLD 0x1ULL +#define V_TCB_ORD_L_BIT_VLD(x) ((x) << S_TCB_ORD_L_BIT_VLD) + +#define W_TCB_RDMAP_OPCODE 31 +#define S_TCB_RDMAP_OPCODE 24 +#define M_TCB_RDMAP_OPCODE 0xfULL +#define V_TCB_RDMAP_OPCODE(x) ((x) << S_TCB_RDMAP_OPCODE) + +#define W_TCB_TX_FLUSH 31 +#define S_TCB_TX_FLUSH 28 +#define M_TCB_TX_FLUSH 0x1ULL +#define V_TCB_TX_FLUSH(x) ((x) << S_TCB_TX_FLUSH) + +#define W_TCB_TX_OOS_RXMT 31 +#define S_TCB_TX_OOS_RXMT 29 +#define M_TCB_TX_OOS_RXMT 0x1ULL +#define V_TCB_TX_OOS_RXMT(x) ((x) << S_TCB_TX_OOS_RXMT) + +#define W_TCB_TX_OOS_TXMT 31 +#define S_TCB_TX_OOS_TXMT 30 +#define M_TCB_TX_OOS_TXMT 0x1ULL +#define V_TCB_TX_OOS_TXMT(x) ((x) << S_TCB_TX_OOS_TXMT) + +#define W_TCB_SLUSH_AUX2 31 +#define S_TCB_SLUSH_AUX2 31 +#define M_TCB_SLUSH_AUX2 0x1ULL +#define V_TCB_SLUSH_AUX2(x) ((x) << S_TCB_SLUSH_AUX2) + +#define W_TCB_RX_FRAG1_PTR_RAW2 25 +#define S_TCB_RX_FRAG1_PTR_RAW2 30 +#define M_TCB_RX_FRAG1_PTR_RAW2 0x1ffffULL +#define V_TCB_RX_FRAG1_PTR_RAW2(x) ((x) << S_TCB_RX_FRAG1_PTR_RAW2) + +#define W_TCB_RX_DDP_FLAGS 26 +#define S_TCB_RX_DDP_FLAGS 15 +#define M_TCB_RX_DDP_FLAGS 0x3ffULL +#define V_TCB_RX_DDP_FLAGS(x) ((x) << S_TCB_RX_DDP_FLAGS) + +#define W_TCB_SLUSH_AUX3 26 +#define S_TCB_SLUSH_AUX3 31 +#define M_TCB_SLUSH_AUX3 0x1ffULL +#define V_TCB_SLUSH_AUX3(x) ((x) << S_TCB_SLUSH_AUX3) + +#define W_TCB_RX_DDP_BUF0_OFFSET 27 +#define S_TCB_RX_DDP_BUF0_OFFSET 8 +#define M_TCB_RX_DDP_BUF0_OFFSET 0x3fffffULL +#define V_TCB_RX_DDP_BUF0_OFFSET(x) ((x) << S_TCB_RX_DDP_BUF0_OFFSET) + +#define W_TCB_RX_DDP_BUF0_LEN 27 +#define S_TCB_RX_DDP_BUF0_LEN 30 +#define M_TCB_RX_DDP_BUF0_LEN 0x3fffffULL +#define V_TCB_RX_DDP_BUF0_LEN(x) ((x) << S_TCB_RX_DDP_BUF0_LEN) + +#define W_TCB_RX_DDP_BUF1_OFFSET 28 +#define S_TCB_RX_DDP_BUF1_OFFSET 20 +#define M_TCB_RX_DDP_BUF1_OFFSET 0x3fffffULL +#define V_TCB_RX_DDP_BUF1_OFFSET(x) ((x) << S_TCB_RX_DDP_BUF1_OFFSET) + +#define W_TCB_RX_DDP_BUF1_LEN 29 +#define S_TCB_RX_DDP_BUF1_LEN 10 +#define M_TCB_RX_DDP_BUF1_LEN 0x3fffffULL +#define V_TCB_RX_DDP_BUF1_LEN(x) ((x) << S_TCB_RX_DDP_BUF1_LEN) + +#define W_TCB_RX_DDP_BUF0_TAG 30 +#define S_TCB_RX_DDP_BUF0_TAG 0 +#define M_TCB_RX_DDP_BUF0_TAG 0xffffffffULL +#define V_TCB_RX_DDP_BUF0_TAG(x) ((x) << S_TCB_RX_DDP_BUF0_TAG) + +#define W_TCB_RX_DDP_BUF1_TAG 31 +#define S_TCB_RX_DDP_BUF1_TAG 0 +#define M_TCB_RX_DDP_BUF1_TAG 0xffffffffULL +#define V_TCB_RX_DDP_BUF1_TAG(x) ((x) << S_TCB_RX_DDP_BUF1_TAG) + +#define S_TF_DACK 10 +#define V_TF_DACK(x) ((x) << S_TF_DACK) + +#define S_TF_NAGLE 11 +#define V_TF_NAGLE(x) ((x) << S_TF_NAGLE) + +#define S_TF_RECV_SCALE 12 +#define V_TF_RECV_SCALE(x) ((x) << S_TF_RECV_SCALE) + +#define S_TF_RECV_TSTMP 13 +#define V_TF_RECV_TSTMP(x) ((x) << S_TF_RECV_TSTMP) + +#define S_TF_RECV_SACK 14 +#define V_TF_RECV_SACK(x) ((x) << S_TF_RECV_SACK) + +#define S_TF_TURBO 15 +#define V_TF_TURBO(x) ((x) << S_TF_TURBO) + +#define S_TF_KEEPALIVE 16 +#define V_TF_KEEPALIVE(x) ((x) << S_TF_KEEPALIVE) + +#define S_TF_TCAM_BYPASS 17 +#define V_TF_TCAM_BYPASS(x) ((x) << S_TF_TCAM_BYPASS) + +#define S_TF_CORE_FIN 18 +#define V_TF_CORE_FIN(x) ((x) << S_TF_CORE_FIN) + +#define S_TF_CORE_MORE 19 +#define V_TF_CORE_MORE(x) ((x) << S_TF_CORE_MORE) + +#define S_TF_MIGRATING 20 +#define V_TF_MIGRATING(x) ((x) << S_TF_MIGRATING) + +#define S_TF_ACTIVE_OPEN 21 +#define V_TF_ACTIVE_OPEN(x) ((x) << S_TF_ACTIVE_OPEN) + +#define S_TF_ASK_MODE 22 +#define V_TF_ASK_MODE(x) ((x) << S_TF_ASK_MODE) + +#define S_TF_NON_OFFLOAD 23 +#define V_TF_NON_OFFLOAD(x) ((x) << S_TF_NON_OFFLOAD) + +#define S_TF_MOD_SCHD 24 +#define V_TF_MOD_SCHD(x) ((x) << S_TF_MOD_SCHD) + +#define S_TF_MOD_SCHD_REASON0 25 +#define V_TF_MOD_SCHD_REASON0(x) ((x) << S_TF_MOD_SCHD_REASON0) + +#define S_TF_MOD_SCHD_REASON1 26 +#define V_TF_MOD_SCHD_REASON1(x) ((x) << S_TF_MOD_SCHD_REASON1) + +#define S_TF_MOD_SCHD_RX 27 +#define V_TF_MOD_SCHD_RX(x) ((x) << S_TF_MOD_SCHD_RX) + +#define S_TF_CORE_PUSH 28 +#define V_TF_CORE_PUSH(x) ((x) << S_TF_CORE_PUSH) + +#define S_TF_RCV_COALESCE_ENABLE 29 +#define V_TF_RCV_COALESCE_ENABLE(x) ((x) << S_TF_RCV_COALESCE_ENABLE) + +#define S_TF_RCV_COALESCE_PUSH 30 +#define V_TF_RCV_COALESCE_PUSH(x) ((x) << S_TF_RCV_COALESCE_PUSH) + +#define S_TF_RCV_COALESCE_LAST_PSH 31 +#define V_TF_RCV_COALESCE_LAST_PSH(x) ((x) << S_TF_RCV_COALESCE_LAST_PSH) + +#define S_TF_RCV_COALESCE_HEARTBEAT 32 +#define V_TF_RCV_COALESCE_HEARTBEAT(x) ((x) << S_TF_RCV_COALESCE_HEARTBEAT) + +#define S_TF_HALF_CLOSE 33 +#define V_TF_HALF_CLOSE(x) ((x) << S_TF_HALF_CLOSE) + +#define S_TF_DACK_MSS 34 +#define V_TF_DACK_MSS(x) ((x) << S_TF_DACK_MSS) + +#define S_TF_CCTRL_SEL0 35 +#define V_TF_CCTRL_SEL0(x) ((x) << S_TF_CCTRL_SEL0) + +#define S_TF_CCTRL_SEL1 36 +#define V_TF_CCTRL_SEL1(x) ((x) << S_TF_CCTRL_SEL1) + +#define S_TF_TCP_NEWRENO_FAST_RECOVERY 37 +#define V_TF_TCP_NEWRENO_FAST_RECOVERY(x) ((x) << S_TF_TCP_NEWRENO_FAST_RECOVERY) + +#define S_TF_TX_PACE_AUTO 38 +#define V_TF_TX_PACE_AUTO(x) ((x) << S_TF_TX_PACE_AUTO) + +#define S_TF_PEER_FIN_HELD 39 +#define V_TF_PEER_FIN_HELD(x) ((x) << S_TF_PEER_FIN_HELD) + +#define S_TF_CORE_URG 40 +#define V_TF_CORE_URG(x) ((x) << S_TF_CORE_URG) + +#define S_TF_RDMA_ERROR 41 +#define V_TF_RDMA_ERROR(x) ((x) << S_TF_RDMA_ERROR) + +#define S_TF_SSWS_DISABLED 42 +#define V_TF_SSWS_DISABLED(x) ((x) << S_TF_SSWS_DISABLED) + +#define S_TF_DUPACK_COUNT_ODD 43 +#define V_TF_DUPACK_COUNT_ODD(x) ((x) << S_TF_DUPACK_COUNT_ODD) + +#define S_TF_TX_CHANNEL 44 +#define V_TF_TX_CHANNEL(x) ((x) << S_TF_TX_CHANNEL) + +#define S_TF_RX_CHANNEL 45 +#define V_TF_RX_CHANNEL(x) ((x) << S_TF_RX_CHANNEL) + +#define S_TF_TX_PACE_FIXED 46 +#define V_TF_TX_PACE_FIXED(x) ((x) << S_TF_TX_PACE_FIXED) + +#define S_TF_RDMA_FLM_ERROR 47 +#define V_TF_RDMA_FLM_ERROR(x) ((x) << S_TF_RDMA_FLM_ERROR) + +#define S_TF_RX_FLOW_CONTROL_DISABLE 48 +#define V_TF_RX_FLOW_CONTROL_DISABLE(x) ((x) << S_TF_RX_FLOW_CONTROL_DISABLE) + +#endif /* _TCB_DEFS_H */ -- cgit v0.10.2 From c7d204e8fdf02f88d91707213f473805bcfb977b Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sat, 10 Feb 2007 23:17:26 +0200 Subject: IB/mthca: Fix reserved MTTs calculation on mem-free HCAs The reserved_mtts field has different meaning in Tavor and Arbel, so we are wasting mtt entries on memfree. Fix the Arbel case to match Tavor semantics. Signed-off-by: Michael S. Tsirkin Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c index 968d151..7131446 100644 --- a/drivers/infiniband/hw/mthca/mthca_cmd.c +++ b/drivers/infiniband/hw/mthca/mthca_cmd.c @@ -1051,7 +1051,11 @@ int mthca_QUERY_DEV_LIM(struct mthca_dev *dev, MTHCA_GET(field, outbox, QUERY_DEV_LIM_MAX_EQ_OFFSET); dev_lim->max_eqs = 1 << (field & 0x7); MTHCA_GET(field, outbox, QUERY_DEV_LIM_RSVD_MTT_OFFSET); - dev_lim->reserved_mtts = 1 << (field >> 4); + if (mthca_is_memfree(dev)) + dev_lim->reserved_mtts = ALIGN((1 << (field >> 4)) * sizeof(u64), + MTHCA_MTT_SEG_SIZE) / MTHCA_MTT_SEG_SIZE; + else + dev_lim->reserved_mtts = 1 << (field >> 4); MTHCA_GET(field, outbox, QUERY_DEV_LIM_MAX_MRW_SZ_OFFSET); dev_lim->max_mrw_sz = 1 << field; MTHCA_GET(field, outbox, QUERY_DEV_LIM_RSVD_MRW_OFFSET); -- cgit v0.10.2 From 1d1f19cfce7687b557cebdc41bf8a5eeba8a9882 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sat, 10 Feb 2007 23:17:26 +0200 Subject: IB/mthca: Give reserved MTTs a separate cache line MTTs are allocated in non-cache-coherent memory, so we must give reserved MTTs their own cache line, to prevent both device and CPU from writing into the same cache line at the same time. Signed-off-by: Michael S. Tsirkin Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c index 44bc6cc..9a9dd32 100644 --- a/drivers/infiniband/hw/mthca/mthca_main.c +++ b/drivers/infiniband/hw/mthca/mthca_main.c @@ -464,6 +464,10 @@ static int mthca_init_icm(struct mthca_dev *mdev, goto err_unmap_aux; } + /* CPU writes to non-reserved MTTs, while HCA might DMA to reserved mtts */ + mdev->limits.reserved_mtts = ALIGN(mdev->limits.reserved_mtts * MTHCA_MTT_SEG_SIZE, + dma_get_cache_alignment()) / MTHCA_MTT_SEG_SIZE; + mdev->mr_table.mtt_table = mthca_alloc_icm_table(mdev, init_hca->mtt_base, MTHCA_MTT_SEG_SIZE, mdev->limits.num_mtt_segs, -- cgit v0.10.2 From 391e4dea7189eef32b0c2d121e7e047110c1b83c Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sat, 10 Feb 2007 23:15:08 +0200 Subject: IB/mthca: Fix access to MTT and MPT tables on non-cache-coherent CPUs We allocate the MTT table with alloc_pages() and then do pci_map_sg(), so we must call pci_dma_sync_sg() after the CPU writes to the MTT table. This works since the device will never write MTTs on mem-free HCAs, once we get rid of the use of the WRITE_MTT firmware command. This change is needed to make that work, and is an improvement for now, since it gives FMRs a chance at working. For MPTs, both the device and CPU might write there, so we must allocate DMA coherent memory for these. Signed-off-by: Michael S. Tsirkin Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c index 9a9dd32..0d9b7d0 100644 --- a/drivers/infiniband/hw/mthca/mthca_main.c +++ b/drivers/infiniband/hw/mthca/mthca_main.c @@ -379,7 +379,7 @@ static int mthca_load_fw(struct mthca_dev *mdev) mdev->fw.arbel.fw_icm = mthca_alloc_icm(mdev, mdev->fw.arbel.fw_pages, - GFP_HIGHUSER | __GFP_NOWARN); + GFP_HIGHUSER | __GFP_NOWARN, 0); if (!mdev->fw.arbel.fw_icm) { mthca_err(mdev, "Couldn't allocate FW area, aborting.\n"); return -ENOMEM; @@ -412,7 +412,7 @@ err_unmap_fa: mthca_UNMAP_FA(mdev, &status); err_free: - mthca_free_icm(mdev, mdev->fw.arbel.fw_icm); + mthca_free_icm(mdev, mdev->fw.arbel.fw_icm, 0); return err; } @@ -441,7 +441,7 @@ static int mthca_init_icm(struct mthca_dev *mdev, (unsigned long long) aux_pages << 2); mdev->fw.arbel.aux_icm = mthca_alloc_icm(mdev, aux_pages, - GFP_HIGHUSER | __GFP_NOWARN); + GFP_HIGHUSER | __GFP_NOWARN, 0); if (!mdev->fw.arbel.aux_icm) { mthca_err(mdev, "Couldn't allocate aux memory, aborting.\n"); return -ENOMEM; @@ -471,7 +471,8 @@ static int mthca_init_icm(struct mthca_dev *mdev, mdev->mr_table.mtt_table = mthca_alloc_icm_table(mdev, init_hca->mtt_base, MTHCA_MTT_SEG_SIZE, mdev->limits.num_mtt_segs, - mdev->limits.reserved_mtts, 1); + mdev->limits.reserved_mtts, + 1, 0); if (!mdev->mr_table.mtt_table) { mthca_err(mdev, "Failed to map MTT context memory, aborting.\n"); err = -ENOMEM; @@ -481,7 +482,8 @@ static int mthca_init_icm(struct mthca_dev *mdev, mdev->mr_table.mpt_table = mthca_alloc_icm_table(mdev, init_hca->mpt_base, dev_lim->mpt_entry_sz, mdev->limits.num_mpts, - mdev->limits.reserved_mrws, 1); + mdev->limits.reserved_mrws, + 1, 1); if (!mdev->mr_table.mpt_table) { mthca_err(mdev, "Failed to map MPT context memory, aborting.\n"); err = -ENOMEM; @@ -491,7 +493,8 @@ static int mthca_init_icm(struct mthca_dev *mdev, mdev->qp_table.qp_table = mthca_alloc_icm_table(mdev, init_hca->qpc_base, dev_lim->qpc_entry_sz, mdev->limits.num_qps, - mdev->limits.reserved_qps, 0); + mdev->limits.reserved_qps, + 0, 0); if (!mdev->qp_table.qp_table) { mthca_err(mdev, "Failed to map QP context memory, aborting.\n"); err = -ENOMEM; @@ -501,7 +504,8 @@ static int mthca_init_icm(struct mthca_dev *mdev, mdev->qp_table.eqp_table = mthca_alloc_icm_table(mdev, init_hca->eqpc_base, dev_lim->eqpc_entry_sz, mdev->limits.num_qps, - mdev->limits.reserved_qps, 0); + mdev->limits.reserved_qps, + 0, 0); if (!mdev->qp_table.eqp_table) { mthca_err(mdev, "Failed to map EQP context memory, aborting.\n"); err = -ENOMEM; @@ -511,7 +515,7 @@ static int mthca_init_icm(struct mthca_dev *mdev, mdev->qp_table.rdb_table = mthca_alloc_icm_table(mdev, init_hca->rdb_base, MTHCA_RDB_ENTRY_SIZE, mdev->limits.num_qps << - mdev->qp_table.rdb_shift, + mdev->qp_table.rdb_shift, 0, 0, 0); if (!mdev->qp_table.rdb_table) { mthca_err(mdev, "Failed to map RDB context memory, aborting\n"); @@ -522,7 +526,8 @@ static int mthca_init_icm(struct mthca_dev *mdev, mdev->cq_table.table = mthca_alloc_icm_table(mdev, init_hca->cqc_base, dev_lim->cqc_entry_sz, mdev->limits.num_cqs, - mdev->limits.reserved_cqs, 0); + mdev->limits.reserved_cqs, + 0, 0); if (!mdev->cq_table.table) { mthca_err(mdev, "Failed to map CQ context memory, aborting.\n"); err = -ENOMEM; @@ -534,7 +539,8 @@ static int mthca_init_icm(struct mthca_dev *mdev, mthca_alloc_icm_table(mdev, init_hca->srqc_base, dev_lim->srq_entry_sz, mdev->limits.num_srqs, - mdev->limits.reserved_srqs, 0); + mdev->limits.reserved_srqs, + 0, 0); if (!mdev->srq_table.table) { mthca_err(mdev, "Failed to map SRQ context memory, " "aborting.\n"); @@ -554,7 +560,7 @@ static int mthca_init_icm(struct mthca_dev *mdev, mdev->limits.num_amgms, mdev->limits.num_mgms + mdev->limits.num_amgms, - 0); + 0, 0); if (!mdev->mcg_table.table) { mthca_err(mdev, "Failed to map MCG context memory, aborting.\n"); err = -ENOMEM; @@ -592,7 +598,7 @@ err_unmap_aux: mthca_UNMAP_ICM_AUX(mdev, &status); err_free_aux: - mthca_free_icm(mdev, mdev->fw.arbel.aux_icm); + mthca_free_icm(mdev, mdev->fw.arbel.aux_icm, 0); return err; } @@ -613,7 +619,7 @@ static void mthca_free_icms(struct mthca_dev *mdev) mthca_unmap_eq_icm(mdev); mthca_UNMAP_ICM_AUX(mdev, &status); - mthca_free_icm(mdev, mdev->fw.arbel.aux_icm); + mthca_free_icm(mdev, mdev->fw.arbel.aux_icm, 0); } static int mthca_init_arbel(struct mthca_dev *mdev) @@ -697,7 +703,7 @@ err_free_icm: err_stop_fw: mthca_UNMAP_FA(mdev, &status); - mthca_free_icm(mdev, mdev->fw.arbel.fw_icm); + mthca_free_icm(mdev, mdev->fw.arbel.fw_icm, 0); err_disable: if (!(mdev->mthca_flags & MTHCA_FLAG_NO_LAM)) @@ -716,7 +722,7 @@ static void mthca_close_hca(struct mthca_dev *mdev) mthca_free_icms(mdev); mthca_UNMAP_FA(mdev, &status); - mthca_free_icm(mdev, mdev->fw.arbel.fw_icm); + mthca_free_icm(mdev, mdev->fw.arbel.fw_icm, 0); if (!(mdev->mthca_flags & MTHCA_FLAG_NO_LAM)) mthca_DISABLE_LAM(mdev, &status); diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.c b/drivers/infiniband/hw/mthca/mthca_memfree.c index 6b19645..0b9d053 100644 --- a/drivers/infiniband/hw/mthca/mthca_memfree.c +++ b/drivers/infiniband/hw/mthca/mthca_memfree.c @@ -35,6 +35,9 @@ */ #include +#include + +#include #include "mthca_memfree.h" #include "mthca_dev.h" @@ -58,22 +61,42 @@ struct mthca_user_db_table { } page[0]; }; -void mthca_free_icm(struct mthca_dev *dev, struct mthca_icm *icm) +static void mthca_free_icm_pages(struct mthca_dev *dev, struct mthca_icm_chunk *chunk) +{ + int i; + + if (chunk->nsg > 0) + pci_unmap_sg(dev->pdev, chunk->mem, chunk->npages, + PCI_DMA_BIDIRECTIONAL); + + for (i = 0; i < chunk->npages; ++i) + __free_pages(chunk->mem[i].page, + get_order(chunk->mem[i].length)); +} + +static void mthca_free_icm_coherent(struct mthca_dev *dev, struct mthca_icm_chunk *chunk) { - struct mthca_icm_chunk *chunk, *tmp; int i; + for (i = 0; i < chunk->npages; ++i) { + dma_free_coherent(&dev->pdev->dev, chunk->mem[i].length, + lowmem_page_address(chunk->mem[i].page), + sg_dma_address(&chunk->mem[i])); + } +} + +void mthca_free_icm(struct mthca_dev *dev, struct mthca_icm *icm, int coherent) +{ + struct mthca_icm_chunk *chunk, *tmp; + if (!icm) return; list_for_each_entry_safe(chunk, tmp, &icm->chunk_list, list) { - if (chunk->nsg > 0) - pci_unmap_sg(dev->pdev, chunk->mem, chunk->npages, - PCI_DMA_BIDIRECTIONAL); - - for (i = 0; i < chunk->npages; ++i) - __free_pages(chunk->mem[i].page, - get_order(chunk->mem[i].length)); + if (coherent) + mthca_free_icm_coherent(dev, chunk); + else + mthca_free_icm_pages(dev, chunk); kfree(chunk); } @@ -81,12 +104,41 @@ void mthca_free_icm(struct mthca_dev *dev, struct mthca_icm *icm) kfree(icm); } +static int mthca_alloc_icm_pages(struct scatterlist *mem, int order, gfp_t gfp_mask) +{ + mem->page = alloc_pages(gfp_mask, order); + if (!mem->page) + return -ENOMEM; + + mem->length = PAGE_SIZE << order; + mem->offset = 0; + return 0; +} + +static int mthca_alloc_icm_coherent(struct device *dev, struct scatterlist *mem, + int order, gfp_t gfp_mask) +{ + void *buf = dma_alloc_coherent(dev, PAGE_SIZE << order, &sg_dma_address(mem), + gfp_mask); + if (!buf) + return -ENOMEM; + + sg_set_buf(mem, buf, PAGE_SIZE << order); + BUG_ON(mem->offset); + sg_dma_len(mem) = PAGE_SIZE << order; + return 0; +} + struct mthca_icm *mthca_alloc_icm(struct mthca_dev *dev, int npages, - gfp_t gfp_mask) + gfp_t gfp_mask, int coherent) { struct mthca_icm *icm; struct mthca_icm_chunk *chunk = NULL; int cur_order; + int ret; + + /* We use sg_set_buf for coherent allocs, which assumes low memory */ + BUG_ON(coherent && (gfp_mask & __GFP_HIGHMEM)); icm = kmalloc(sizeof *icm, gfp_mask & ~(__GFP_HIGHMEM | __GFP_NOWARN)); if (!icm) @@ -112,21 +164,28 @@ struct mthca_icm *mthca_alloc_icm(struct mthca_dev *dev, int npages, while (1 << cur_order > npages) --cur_order; - chunk->mem[chunk->npages].page = alloc_pages(gfp_mask, cur_order); - if (chunk->mem[chunk->npages].page) { - chunk->mem[chunk->npages].length = PAGE_SIZE << cur_order; - chunk->mem[chunk->npages].offset = 0; + if (coherent) + ret = mthca_alloc_icm_coherent(&dev->pdev->dev, + &chunk->mem[chunk->npages], + cur_order, gfp_mask); + else + ret = mthca_alloc_icm_pages(&chunk->mem[chunk->npages], + cur_order, gfp_mask); - if (++chunk->npages == MTHCA_ICM_CHUNK_LEN) { + if (!ret) { + ++chunk->npages; + + if (!coherent && chunk->npages == MTHCA_ICM_CHUNK_LEN) { chunk->nsg = pci_map_sg(dev->pdev, chunk->mem, chunk->npages, PCI_DMA_BIDIRECTIONAL); if (chunk->nsg <= 0) goto fail; + } + if (chunk->npages == MTHCA_ICM_CHUNK_LEN) chunk = NULL; - } npages -= 1 << cur_order; } else { @@ -136,7 +195,7 @@ struct mthca_icm *mthca_alloc_icm(struct mthca_dev *dev, int npages, } } - if (chunk) { + if (!coherent && chunk) { chunk->nsg = pci_map_sg(dev->pdev, chunk->mem, chunk->npages, PCI_DMA_BIDIRECTIONAL); @@ -148,7 +207,7 @@ struct mthca_icm *mthca_alloc_icm(struct mthca_dev *dev, int npages, return icm; fail: - mthca_free_icm(dev, icm); + mthca_free_icm(dev, icm, coherent); return NULL; } @@ -167,7 +226,7 @@ int mthca_table_get(struct mthca_dev *dev, struct mthca_icm_table *table, int ob table->icm[i] = mthca_alloc_icm(dev, MTHCA_TABLE_CHUNK_SIZE >> PAGE_SHIFT, (table->lowmem ? GFP_KERNEL : GFP_HIGHUSER) | - __GFP_NOWARN); + __GFP_NOWARN, table->coherent); if (!table->icm[i]) { ret = -ENOMEM; goto out; @@ -175,7 +234,7 @@ int mthca_table_get(struct mthca_dev *dev, struct mthca_icm_table *table, int ob if (mthca_MAP_ICM(dev, table->icm[i], table->virt + i * MTHCA_TABLE_CHUNK_SIZE, &status) || status) { - mthca_free_icm(dev, table->icm[i]); + mthca_free_icm(dev, table->icm[i], table->coherent); table->icm[i] = NULL; ret = -ENOMEM; goto out; @@ -204,16 +263,16 @@ void mthca_table_put(struct mthca_dev *dev, struct mthca_icm_table *table, int o mthca_UNMAP_ICM(dev, table->virt + i * MTHCA_TABLE_CHUNK_SIZE, MTHCA_TABLE_CHUNK_SIZE / MTHCA_ICM_PAGE_SIZE, &status); - mthca_free_icm(dev, table->icm[i]); + mthca_free_icm(dev, table->icm[i], table->coherent); table->icm[i] = NULL; } mutex_unlock(&table->mutex); } -void *mthca_table_find(struct mthca_icm_table *table, int obj) +void *mthca_table_find(struct mthca_icm_table *table, int obj, dma_addr_t *dma_handle) { - int idx, offset, i; + int idx, offset, dma_offset, i; struct mthca_icm_chunk *chunk; struct mthca_icm *icm; struct page *page = NULL; @@ -225,13 +284,22 @@ void *mthca_table_find(struct mthca_icm_table *table, int obj) idx = (obj & (table->num_obj - 1)) * table->obj_size; icm = table->icm[idx / MTHCA_TABLE_CHUNK_SIZE]; - offset = idx % MTHCA_TABLE_CHUNK_SIZE; + dma_offset = offset = idx % MTHCA_TABLE_CHUNK_SIZE; if (!icm) goto out; list_for_each_entry(chunk, &icm->chunk_list, list) { for (i = 0; i < chunk->npages; ++i) { + if (dma_handle && dma_offset >= 0) { + if (sg_dma_len(&chunk->mem[i]) > dma_offset) + *dma_handle = sg_dma_address(&chunk->mem[i]) + + dma_offset; + dma_offset -= sg_dma_len(&chunk->mem[i]); + } + /* DMA mapping can merge pages but not split them, + * so if we found the page, dma_handle has already + * been assigned to. */ if (chunk->mem[i].length > offset) { page = chunk->mem[i].page; goto out; @@ -283,7 +351,7 @@ void mthca_table_put_range(struct mthca_dev *dev, struct mthca_icm_table *table, struct mthca_icm_table *mthca_alloc_icm_table(struct mthca_dev *dev, u64 virt, int obj_size, int nobj, int reserved, - int use_lowmem) + int use_lowmem, int use_coherent) { struct mthca_icm_table *table; int num_icm; @@ -302,6 +370,7 @@ struct mthca_icm_table *mthca_alloc_icm_table(struct mthca_dev *dev, table->num_obj = nobj; table->obj_size = obj_size; table->lowmem = use_lowmem; + table->coherent = use_coherent; mutex_init(&table->mutex); for (i = 0; i < num_icm; ++i) @@ -314,12 +383,12 @@ struct mthca_icm_table *mthca_alloc_icm_table(struct mthca_dev *dev, table->icm[i] = mthca_alloc_icm(dev, chunk_size >> PAGE_SHIFT, (use_lowmem ? GFP_KERNEL : GFP_HIGHUSER) | - __GFP_NOWARN); + __GFP_NOWARN, use_coherent); if (!table->icm[i]) goto err; if (mthca_MAP_ICM(dev, table->icm[i], virt + i * MTHCA_TABLE_CHUNK_SIZE, &status) || status) { - mthca_free_icm(dev, table->icm[i]); + mthca_free_icm(dev, table->icm[i], table->coherent); table->icm[i] = NULL; goto err; } @@ -339,7 +408,7 @@ err: mthca_UNMAP_ICM(dev, virt + i * MTHCA_TABLE_CHUNK_SIZE, MTHCA_TABLE_CHUNK_SIZE / MTHCA_ICM_PAGE_SIZE, &status); - mthca_free_icm(dev, table->icm[i]); + mthca_free_icm(dev, table->icm[i], table->coherent); } kfree(table); @@ -357,7 +426,7 @@ void mthca_free_icm_table(struct mthca_dev *dev, struct mthca_icm_table *table) mthca_UNMAP_ICM(dev, table->virt + i * MTHCA_TABLE_CHUNK_SIZE, MTHCA_TABLE_CHUNK_SIZE / MTHCA_ICM_PAGE_SIZE, &status); - mthca_free_icm(dev, table->icm[i]); + mthca_free_icm(dev, table->icm[i], table->coherent); } kfree(table); diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.h b/drivers/infiniband/hw/mthca/mthca_memfree.h index 6d42947..5941441 100644 --- a/drivers/infiniband/hw/mthca/mthca_memfree.h +++ b/drivers/infiniband/hw/mthca/mthca_memfree.h @@ -69,6 +69,7 @@ struct mthca_icm_table { int num_obj; int obj_size; int lowmem; + int coherent; struct mutex mutex; struct mthca_icm *icm[0]; }; @@ -82,17 +83,17 @@ struct mthca_icm_iter { struct mthca_dev; struct mthca_icm *mthca_alloc_icm(struct mthca_dev *dev, int npages, - gfp_t gfp_mask); -void mthca_free_icm(struct mthca_dev *dev, struct mthca_icm *icm); + gfp_t gfp_mask, int coherent); +void mthca_free_icm(struct mthca_dev *dev, struct mthca_icm *icm, int coherent); struct mthca_icm_table *mthca_alloc_icm_table(struct mthca_dev *dev, u64 virt, int obj_size, int nobj, int reserved, - int use_lowmem); + int use_lowmem, int use_coherent); void mthca_free_icm_table(struct mthca_dev *dev, struct mthca_icm_table *table); int mthca_table_get(struct mthca_dev *dev, struct mthca_icm_table *table, int obj); void mthca_table_put(struct mthca_dev *dev, struct mthca_icm_table *table, int obj); -void *mthca_table_find(struct mthca_icm_table *table, int obj); +void *mthca_table_find(struct mthca_icm_table *table, int obj, dma_addr_t *dma_handle); int mthca_table_get_range(struct mthca_dev *dev, struct mthca_icm_table *table, int start, int end); void mthca_table_put_range(struct mthca_dev *dev, struct mthca_icm_table *table, diff --git a/drivers/infiniband/hw/mthca/mthca_mr.c b/drivers/infiniband/hw/mthca/mthca_mr.c index f71ffa8..7d08f20 100644 --- a/drivers/infiniband/hw/mthca/mthca_mr.c +++ b/drivers/infiniband/hw/mthca/mthca_mr.c @@ -524,7 +524,7 @@ int mthca_fmr_alloc(struct mthca_dev *dev, u32 pd, if (err) goto err_out_mpt_free; - mr->mem.arbel.mpt = mthca_table_find(dev->mr_table.mpt_table, key); + mr->mem.arbel.mpt = mthca_table_find(dev->mr_table.mpt_table, key, NULL); BUG_ON(!mr->mem.arbel.mpt); } else mr->mem.tavor.mpt = dev->mr_table.tavor_fmr.mpt_base + @@ -538,7 +538,8 @@ int mthca_fmr_alloc(struct mthca_dev *dev, u32 pd, if (mthca_is_memfree(dev)) { mr->mem.arbel.mtts = mthca_table_find(dev->mr_table.mtt_table, - mr->mtt->first_seg); + mr->mtt->first_seg, + &mr->mem.arbel.dma_handle); BUG_ON(!mr->mem.arbel.mtts); } else mr->mem.tavor.mtts = dev->mr_table.tavor_fmr.mtt_base + mtt_seg; @@ -712,6 +713,9 @@ int mthca_arbel_map_phys_fmr(struct ib_fmr *ibfmr, u64 *page_list, fmr->mem.arbel.mtts[i] = cpu_to_be64(page_list[i] | MTHCA_MTT_FLAG_PRESENT); + dma_sync_single(&dev->pdev->dev, fmr->mem.arbel.dma_handle, + list_len * sizeof(u64), DMA_TO_DEVICE); + fmr->mem.arbel.mpt->key = cpu_to_be32(key); fmr->mem.arbel.mpt->lkey = cpu_to_be32(key); fmr->mem.arbel.mpt->length = cpu_to_be64(list_len * (1ull << fmr->attr.page_shift)); diff --git a/drivers/infiniband/hw/mthca/mthca_provider.h b/drivers/infiniband/hw/mthca/mthca_provider.h index 9a5bece..1d266ac 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.h +++ b/drivers/infiniband/hw/mthca/mthca_provider.h @@ -89,6 +89,7 @@ struct mthca_fmr { struct { struct mthca_mpt_entry *mpt; __be64 *mtts; + dma_addr_t dma_handle; } arbel; } mem; }; -- cgit v0.10.2 From c20e20ab0f3af9a44842ea11287c9ecd034a5d33 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sat, 10 Feb 2007 23:13:12 +0200 Subject: IB/mthca: Merge MR and FMR space on 64-bit systems For Tavor, we currently reserve separate MPT and MTT space for FMRs to avoid abusing the vmalloc space on 32 bit kernels. No such problem exists on 64 bit kernels so let's not do it there. This way we have a shared pool for MR and FMR resources, used on demand. This will also make it possible to write MTTs for regular regions directly from driver. Signed-off-by: Michael S. Tsirkin Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/mthca/mthca_mr.c b/drivers/infiniband/hw/mthca/mthca_mr.c index 7d08f20..958c6d5 100644 --- a/drivers/infiniband/hw/mthca/mthca_mr.c +++ b/drivers/infiniband/hw/mthca/mthca_mr.c @@ -765,7 +765,7 @@ void mthca_arbel_fmr_unmap(struct mthca_dev *dev, struct mthca_fmr *fmr) int mthca_init_mr_table(struct mthca_dev *dev) { unsigned long addr; - int err, i; + int mpts, mtts, err, i; err = mthca_alloc_init(&dev->mr_table.mpt_alloc, dev->limits.num_mpts, @@ -799,13 +799,21 @@ int mthca_init_mr_table(struct mthca_dev *dev) err = -EINVAL; goto err_fmr_mpt; } + mpts = mtts = 1 << i; + } else { + mpts = dev->limits.num_mtt_segs; + mtts = dev->limits.num_mpts; + } + + if (!mthca_is_memfree(dev) && + (dev->mthca_flags & MTHCA_FLAG_FMR)) { addr = pci_resource_start(dev->pdev, 4) + ((pci_resource_len(dev->pdev, 4) - 1) & dev->mr_table.mpt_base); dev->mr_table.tavor_fmr.mpt_base = - ioremap(addr, (1 << i) * sizeof(struct mthca_mpt_entry)); + ioremap(addr, mpts * sizeof(struct mthca_mpt_entry)); if (!dev->mr_table.tavor_fmr.mpt_base) { mthca_warn(dev, "MPT ioremap for FMR failed.\n"); @@ -818,19 +826,21 @@ int mthca_init_mr_table(struct mthca_dev *dev) dev->mr_table.mtt_base); dev->mr_table.tavor_fmr.mtt_base = - ioremap(addr, (1 << i) * MTHCA_MTT_SEG_SIZE); + ioremap(addr, mtts * MTHCA_MTT_SEG_SIZE); if (!dev->mr_table.tavor_fmr.mtt_base) { mthca_warn(dev, "MTT ioremap for FMR failed.\n"); err = -ENOMEM; goto err_fmr_mtt; } + } - err = mthca_buddy_init(&dev->mr_table.tavor_fmr.mtt_buddy, i); + if (dev->limits.fmr_reserved_mtts) { + err = mthca_buddy_init(&dev->mr_table.tavor_fmr.mtt_buddy, fls(mtts - 1)); if (err) goto err_fmr_mtt_buddy; /* Prevent regular MRs from using FMR keys */ - err = mthca_buddy_alloc(&dev->mr_table.mtt_buddy, i); + err = mthca_buddy_alloc(&dev->mr_table.mtt_buddy, fls(mtts - 1)); if (err) goto err_reserve_fmr; diff --git a/drivers/infiniband/hw/mthca/mthca_profile.c b/drivers/infiniband/hw/mthca/mthca_profile.c index 58d44aa..26bf86d 100644 --- a/drivers/infiniband/hw/mthca/mthca_profile.c +++ b/drivers/infiniband/hw/mthca/mthca_profile.c @@ -277,7 +277,7 @@ u64 mthca_make_profile(struct mthca_dev *dev, * out of the MR pool. They don't use additional memory, but * we assign them as part of the HCA profile anyway. */ - if (mthca_is_memfree(dev)) + if (mthca_is_memfree(dev) || BITS_PER_LONG == 64) dev->limits.fmr_reserved_mtts = 0; else dev->limits.fmr_reserved_mtts = request->fmr_reserved_mtts; -- cgit v0.10.2 From b2875d4c39759a732203db32f245cc6d8bbdd7cf Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sat, 10 Feb 2007 23:14:25 +0200 Subject: IB/mthca: Always fill MTTs from CPU Speed up memory registration by filling in MTTs directly when the CPU can write directly to the whole table (all mem-free cards, and to Tavor mode on 64-bit systems with the patch I posted earlier). This reduces the number of FW commands needed to register an MR by at least a factor of 2 and speeds up memory registration significantly. Signed-off-by: Michael S. Tsirkin Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h index fe5cecf..b7e42ef 100644 --- a/drivers/infiniband/hw/mthca/mthca_dev.h +++ b/drivers/infiniband/hw/mthca/mthca_dev.h @@ -464,6 +464,8 @@ void mthca_uar_free(struct mthca_dev *dev, struct mthca_uar *uar); int mthca_pd_alloc(struct mthca_dev *dev, int privileged, struct mthca_pd *pd); void mthca_pd_free(struct mthca_dev *dev, struct mthca_pd *pd); +int mthca_write_mtt_size(struct mthca_dev *dev); + struct mthca_mtt *mthca_alloc_mtt(struct mthca_dev *dev, int size); void mthca_free_mtt(struct mthca_dev *dev, struct mthca_mtt *mtt); int mthca_write_mtt(struct mthca_dev *dev, struct mthca_mtt *mtt, diff --git a/drivers/infiniband/hw/mthca/mthca_mr.c b/drivers/infiniband/hw/mthca/mthca_mr.c index 958c6d5..6037dd3 100644 --- a/drivers/infiniband/hw/mthca/mthca_mr.c +++ b/drivers/infiniband/hw/mthca/mthca_mr.c @@ -243,8 +243,8 @@ void mthca_free_mtt(struct mthca_dev *dev, struct mthca_mtt *mtt) kfree(mtt); } -int mthca_write_mtt(struct mthca_dev *dev, struct mthca_mtt *mtt, - int start_index, u64 *buffer_list, int list_len) +static int __mthca_write_mtt(struct mthca_dev *dev, struct mthca_mtt *mtt, + int start_index, u64 *buffer_list, int list_len) { struct mthca_mailbox *mailbox; __be64 *mtt_entry; @@ -295,6 +295,84 @@ out: return err; } +int mthca_write_mtt_size(struct mthca_dev *dev) +{ + if (dev->mr_table.fmr_mtt_buddy != &dev->mr_table.mtt_buddy) + /* + * Be friendly to WRITE_MTT command + * and leave two empty slots for the + * index and reserved fields of the + * mailbox. + */ + return PAGE_SIZE / sizeof (u64) - 2; + + /* For Arbel, all MTTs must fit in the same page. */ + return mthca_is_memfree(dev) ? (PAGE_SIZE / sizeof (u64)) : 0x7ffffff; +} + +void mthca_tavor_write_mtt_seg(struct mthca_dev *dev, struct mthca_mtt *mtt, + int start_index, u64 *buffer_list, int list_len) +{ + u64 __iomem *mtts; + int i; + + mtts = dev->mr_table.tavor_fmr.mtt_base + mtt->first_seg * MTHCA_MTT_SEG_SIZE + + start_index * sizeof (u64); + for (i = 0; i < list_len; ++i) + mthca_write64_raw(cpu_to_be64(buffer_list[i] | MTHCA_MTT_FLAG_PRESENT), + mtts + i); +} + +void mthca_arbel_write_mtt_seg(struct mthca_dev *dev, struct mthca_mtt *mtt, + int start_index, u64 *buffer_list, int list_len) +{ + __be64 *mtts; + dma_addr_t dma_handle; + int i; + int s = start_index * sizeof (u64); + + /* For Arbel, all MTTs must fit in the same page. */ + BUG_ON(s / PAGE_SIZE != (s + list_len * sizeof(u64) - 1) / PAGE_SIZE); + /* Require full segments */ + BUG_ON(s % MTHCA_MTT_SEG_SIZE); + + mtts = mthca_table_find(dev->mr_table.mtt_table, mtt->first_seg + + s / MTHCA_MTT_SEG_SIZE, &dma_handle); + + BUG_ON(!mtts); + + for (i = 0; i < list_len; ++i) + mtts[i] = cpu_to_be64(buffer_list[i] | MTHCA_MTT_FLAG_PRESENT); + + dma_sync_single(&dev->pdev->dev, dma_handle, list_len * sizeof (u64), DMA_TO_DEVICE); +} + +int mthca_write_mtt(struct mthca_dev *dev, struct mthca_mtt *mtt, + int start_index, u64 *buffer_list, int list_len) +{ + int size = mthca_write_mtt_size(dev); + int chunk; + + if (dev->mr_table.fmr_mtt_buddy != &dev->mr_table.mtt_buddy) + return __mthca_write_mtt(dev, mtt, start_index, buffer_list, list_len); + + while (list_len > 0) { + chunk = min(size, list_len); + if (mthca_is_memfree(dev)) + mthca_arbel_write_mtt_seg(dev, mtt, start_index, + buffer_list, chunk); + else + mthca_tavor_write_mtt_seg(dev, mtt, start_index, + buffer_list, chunk); + + list_len -= chunk; + start_index += chunk; + buffer_list += chunk; + } + + return 0; +} + static inline u32 tavor_hw_index_to_key(u32 ind) { return ind; diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c index 7b96751..0725ad7 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.c +++ b/drivers/infiniband/hw/mthca/mthca_provider.c @@ -1015,6 +1015,7 @@ static struct ib_mr *mthca_reg_user_mr(struct ib_pd *pd, struct ib_umem *region, int shift, n, len; int i, j, k; int err = 0; + int write_mtt_size; shift = ffs(region->page_size) - 1; @@ -1040,6 +1041,8 @@ static struct ib_mr *mthca_reg_user_mr(struct ib_pd *pd, struct ib_umem *region, i = n = 0; + write_mtt_size = min(mthca_write_mtt_size(dev), (int) (PAGE_SIZE / sizeof *pages)); + list_for_each_entry(chunk, ®ion->chunk_list, list) for (j = 0; j < chunk->nmap; ++j) { len = sg_dma_len(&chunk->page_list[j]) >> shift; @@ -1047,14 +1050,11 @@ static struct ib_mr *mthca_reg_user_mr(struct ib_pd *pd, struct ib_umem *region, pages[i++] = sg_dma_address(&chunk->page_list[j]) + region->page_size * k; /* - * Be friendly to WRITE_MTT command - * and leave two empty slots for the - * index and reserved fields of the - * mailbox. + * Be friendly to write_mtt and pass it chunks + * of appropriate size. */ - if (i == PAGE_SIZE / sizeof (u64) - 2) { - err = mthca_write_mtt(dev, mr->mtt, - n, pages, i); + if (i == write_mtt_size) { + err = mthca_write_mtt(dev, mr->mtt, n, pages, i); if (err) goto mtt_done; n += i; -- cgit v0.10.2 From f413d0d9fa7abcecc40e115cf4aead372d164a75 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 13 Dec 2006 17:40:05 +0900 Subject: sh: Use a jump call table for debug trap handlers. This rips out most of the needlessly complicated sh_bios and kgdb trap handling, and forces it all through a common fast dispatch path. As more debug traps are inserted, it's important to keep them in sync for all of the parts, not just SH-3/4. As the SH-2 parts are unable to do traps in the >= 0x40 range, we restrict the debug traps to the 0x30-0x3f range on all parts, and also bump the kgdb breakpoint trap down in to this range (from 0xff to 0x3c) so it's possible to use for nommu. Optionally, this table can be padded out to catch spurious traps for SH-3/4, but we don't do that yet.. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile index 2f6d2bc..ff30d7f 100644 --- a/arch/sh/kernel/Makefile +++ b/arch/sh/kernel/Makefile @@ -6,7 +6,8 @@ extra-y := head.o init_task.o vmlinux.lds obj-y := process.o signal.o traps.o irq.o \ ptrace.o setup.o time.o sys_sh.o semaphore.o \ - io.o io_generic.o sh_ksyms.o syscalls.o + io.o io_generic.o sh_ksyms.o syscalls.o \ + debugtraps.o obj-y += cpu/ timers/ obj-$(CONFIG_VSYSCALL) += vsyscall/ diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S index d51fa5e9..8de4810 100644 --- a/arch/sh/kernel/cpu/sh2/entry.S +++ b/arch/sh/kernel/cpu/sh2/entry.S @@ -206,7 +206,7 @@ trap_entry: #if defined(CONFIG_SH_STANDARD_BIOS) /* Unwind the stack and jmp to the debug entry */ -debug_kernel_fw: +ENTRY(sh_bios_handler) mov r15,r0 add #(22-4)*4-4,r0 ldc.l @r0+,gbr diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index 8c0dc27..014ac37 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -173,7 +173,7 @@ call_dae: #if defined(CONFIG_SH_STANDARD_BIOS) /* Unwind the stack and jmp to the debug entry */ -debug_kernel_fw: +ENTRY(sh_bios_handler) mov.l @r15+, r0 mov.l @r15+, r1 mov.l @r15+, r2 diff --git a/arch/sh/kernel/debugtraps.S b/arch/sh/kernel/debugtraps.S new file mode 100644 index 0000000..13b6674 --- /dev/null +++ b/arch/sh/kernel/debugtraps.S @@ -0,0 +1,41 @@ +/* + * arch/sh/kernel/debugtraps.S + * + * Debug trap jump tables for SuperH + * + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include + +#if !defined(CONFIG_SH_KGDB) +#define kgdb_handle_exception debug_trap_handler +#endif + +#if !defined(CONFIG_SH_STANDARD_BIOS) +#define sh_bios_handler debug_trap_handler +#endif + + .data + +ENTRY(debug_trap_table) + .long debug_trap_handler /* 0x30 */ + .long debug_trap_handler /* 0x31 */ + .long debug_trap_handler /* 0x32 */ + .long debug_trap_handler /* 0x33 */ + .long debug_trap_handler /* 0x34 */ + .long debug_trap_handler /* 0x35 */ + .long debug_trap_handler /* 0x36 */ + .long debug_trap_handler /* 0x37 */ + .long debug_trap_handler /* 0x38 */ + .long debug_trap_handler /* 0x39 */ + .long debug_trap_handler /* 0x3a */ + .long debug_trap_handler /* 0x3b */ + .long kgdb_handle_exception /* 0x3c */ + .long debug_trap_handler /* 0x3d */ + .long bug_trap_handler /* 0x3e */ + .long sh_bios_handler /* 0x3f */ diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S index fc279ae..ab4ebb8 100644 --- a/arch/sh/kernel/entry-common.S +++ b/arch/sh/kernel/entry-common.S @@ -54,79 +54,24 @@ # define resume_kernel __restore_all #endif -#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB) -! Handle kernel debug if either kgdb (SW) or gdb-stub (FW) is present. -! If both are configured, handle the debug traps (breakpoints) in SW, -! but still allow BIOS traps to FW. - - .align 2 -debug_kernel: -#if defined(CONFIG_SH_STANDARD_BIOS) && defined(CONFIG_SH_KGDB) - /* Force BIOS call to FW (debug_trap put TRA in r8) */ - mov r8,r0 - shlr2 r0 - cmp/eq #0x3f,r0 - bt debug_kernel_fw -#endif /* CONFIG_SH_STANDARD_BIOS && CONFIG_SH_KGDB */ - -debug_enter: -#if defined(CONFIG_SH_KGDB) - /* Jump to kgdb, pass stacked regs as arg */ -debug_kernel_sw: - mov.l 3f, r0 - jmp @r0 - mov r15, r4 - .align 2 -3: .long kgdb_handle_exception -#endif /* CONFIG_SH_KGDB */ -#ifdef CONFIG_SH_STANDARD_BIOS - bra debug_kernel_fw - nop -#endif -#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */ - - .align 2 -debug_trap: -#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB) - mov r8, r0 - shlr2 r0 - cmp/eq #0x3f, r0 ! sh_bios() trap - bf 1f -#ifdef CONFIG_SH_KGDB - cmp/eq #0xff, r0 ! XXX: KGDB trap, fix for SH-2. - bf 1f -#endif - mov #OFF_SR, r0 - mov.l @(r0,r15), r0 ! get status register - shll r0 - shll r0 ! kernel space? - bt/s debug_kernel -1: -#endif - mov.l @r15, r0 ! Restore R0 value - mov.l 1f, r8 - jmp @r8 - nop .align 2 ENTRY(exception_error) ! #ifdef CONFIG_TRACE_IRQFLAGS - mov.l 3f, r0 + mov.l 2f, r0 jsr @r0 nop #endif sti - mov.l 2f, r0 + mov.l 1f, r0 jmp @r0 nop -! .align 2 -1: .long break_point_trap_software -2: .long do_exception_error +1: .long do_exception_error #ifdef CONFIG_TRACE_IRQFLAGS -3: .long trace_hardirqs_on +2: .long trace_hardirqs_on #endif .align 2 @@ -331,16 +276,31 @@ __restore_all: 1: .long restore_all .align 2 -not_syscall_tra: - bra debug_trap - nop - - .align 2 syscall_badsys: ! Bad syscall number mov #-ENOSYS, r0 bra resume_userspace mov.l r0, @(OFF_R0,r15) ! Return value - + +/* + * The main debug trap handler. + * + * r8=TRA (not the trap number!) + * + * Note: This assumes that the trapa value is left in its original + * form (without the shlr2 shift) so the calculation for the jump + * call table offset remains a simple in place mask. + */ +debug_trap: + mov r8, r0 + and #(0xf << 2), r0 + mov.l 1f, r8 + add r0, r8 + mov.l @r8, r8 + jmp @r8 + nop + + .align 2 +1: .long debug_trap_table /* * Syscall interface: @@ -348,17 +308,19 @@ syscall_badsys: ! Bad syscall number * Syscall #: R3 * Arguments #0 to #3: R4--R7 * Arguments #4 to #6: R0, R1, R2 - * TRA: (number of arguments + 0x10) x 4 + * TRA: (number of arguments + ABI revision) x 4 * * This code also handles delegating other traps to the BIOS/gdb stub * according to: * * Trap number - * (TRA>>2) Purpose - * -------- ------- - * 0x0-0xf old syscall ABI - * 0x10-0x1f new syscall ABI - * 0x20-0xff delegated through debug_trap to BIOS/gdb stub. + * (TRA>>2) Purpose + * -------- ------- + * 0x00-0x0f original SH-3/4 syscall ABI (not in general use). + * 0x10-0x1f general SH-3/4 syscall ABI. + * 0x20-0x2f syscall ABI for SH-2 parts. + * 0x30-0x3f debug traps used by the kernel. + * 0x40-0xff Not supported by all parts, so left unhandled. * * Note: When we're first called, the TRA value must be shifted * right 2 bits in order to get the value that was used as the "trapa" @@ -375,17 +337,22 @@ ret_from_fork: nop .align 2 1: .long schedule_tail - ! + +/* + * The poorly named main trapa decode and dispatch routine, for + * system calls and debug traps through their respective jump tables. + */ ENTRY(system_call) #if !defined(CONFIG_CPU_SH2) mov.l 1f, r9 mov.l @r9, r8 ! Read from TRA (Trap Address) Register #endif - ! - ! Is the trap argument >= 0x20? (TRA will be >= 0x80) - mov #0x7f, r9 + /* + * Check the trap type + */ + mov #((0x20 << 2) - 1), r9 cmp/hi r9, r8 - bt/s not_syscall_tra + bt/s debug_trap ! it's a debug trap.. mov #OFF_TRA, r9 add r15, r9 mov.l r8, @r9 ! set TRA value to tra diff --git a/arch/sh/kernel/kgdb_stub.c b/arch/sh/kernel/kgdb_stub.c index 9c6315f..d8927d8 100644 --- a/arch/sh/kernel/kgdb_stub.c +++ b/arch/sh/kernel/kgdb_stub.c @@ -1323,8 +1323,11 @@ static void kgdb_command_loop(const int excep_code, const int trapa_value) } /* There has been an exception, most likely a breakpoint. */ -void kgdb_handle_exception(struct pt_regs *regs) +asmlinkage void kgdb_handle_exception(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs __regs) { + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); int excep_code, vbr_val; int count; int trapa_value = ctrl_inl(TRA); @@ -1368,8 +1371,6 @@ void kgdb_handle_exception(struct pt_regs *regs) vbr_val = trap_registers.vbr; asm("ldc %0, vbr": :"r"(vbr_val)); - - return; } /* Trigger a breakpoint by function */ diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c index 486c06e..cc8f306 100644 --- a/arch/sh/kernel/process.c +++ b/arch/sh/kernel/process.c @@ -493,9 +493,27 @@ asmlinkage void break_point_trap(void) force_sig(SIGTRAP, current); } -asmlinkage void break_point_trap_software(unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7, - struct pt_regs __regs) +/* + * Generic trap handler. + */ +asmlinkage void debug_trap_handler(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs __regs) +{ + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); + + /* Rewind */ + regs->pc -= 2; + + force_sig(SIGTRAP, current); +} + +/* + * Special handler for BUG() traps. + */ +asmlinkage void bug_trap_handler(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs __regs) { struct pt_regs *regs = RELOC_HIDE(&__regs, 0); diff --git a/include/asm-sh/kgdb.h b/include/asm-sh/kgdb.h index 7b26f53..0095c66 100644 --- a/include/asm-sh/kgdb.h +++ b/include/asm-sh/kgdb.h @@ -85,10 +85,10 @@ extern int setjmp(jmp_buf __jmpb); #define KGDB_PRINTK(...) printk("KGDB: " __VA_ARGS__) /* Forced breakpoint */ -#define BREAKPOINT() do { \ - if (kgdb_enabled) { \ - asm volatile("trapa #0xff"); \ - } \ +#define BREAKPOINT() \ +do { \ + if (kgdb_enabled) \ + __asm__ __volatile__("trapa #0x3c"); \ } while (0) /* KGDB should be able to flush all kernel text space */ -- cgit v0.10.2 From 702dd80375046d36f892a0f86c83f8549c623b35 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 19 Dec 2006 12:05:17 +0900 Subject: sh: Use proper SH-2A CFLAGS on newer compilers. -m2 doesn't end up working particularly well when we've got a constrained toolchain target. Switch to the same semantics used by SH-4A to attempt to get it right. Spotted by Alex Song . Signed-off-by: Paul Mundt diff --git a/arch/sh/Makefile b/arch/sh/Makefile index c1dbef2..4903c7c 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -35,6 +35,7 @@ endif endif cflags-$(CONFIG_CPU_SH2) := -m2 +cflags-$(CONFIG_CPU_SH2A) := -m2a $(call cc-option,-m2a-nofpu,) cflags-$(CONFIG_CPU_SH3) := -m3 cflags-$(CONFIG_CPU_SH4) := -m4 \ $(call cc-option,-mno-implicit-fp,-m4-nofpu) -- cgit v0.10.2 From 4aa362bbdd801dd971acbe3db479fe871f2fed0b Mon Sep 17 00:00:00 2001 From: Yoshinori Sato Date: Tue, 19 Dec 2006 12:10:48 +0900 Subject: sh: Update SH-2 to use the debug trap jump table. Signed-off-by: Yoshinori Sato Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S index 8de4810..7f7d292 100644 --- a/arch/sh/kernel/cpu/sh2/entry.S +++ b/arch/sh/kernel/cpu/sh2/entry.S @@ -178,12 +178,10 @@ interrupt_entry: 8: .long do_exception_error trap_entry: - /* verbose BUG trapa entry check */ - mov #0x3e,r8 - cmp/ge r8,r9 - bf/s 1f - add #-0x10,r9 - add #0x10,r9 + mov #0x30,r8 + cmp/ge r8,r9 ! vector 0x20-0x2f is systemcall + bt 1f + add #-0x10,r9 ! convert SH2 to SH3/4 ABI 1: shll2 r9 ! TRA mov #OFF_TRA,r8 -- cgit v0.10.2 From 5c67cd05e3e9b6f08c3472dd66f0d8d03e1ee870 Mon Sep 17 00:00:00 2001 From: Yoshinori Sato Date: Tue, 19 Dec 2006 12:12:01 +0900 Subject: sh: sh7619 / sh7206 IPR initialize update IPR initialize proceduere update. Signed-off-by: Yoshinori Sato Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c index 79283e6..f83ff8a 100644 --- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c +++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c @@ -52,42 +52,38 @@ static int __init sh7619_devices_setup(void) } __initcall(sh7619_devices_setup); -#define INTC_IPRC 0xf8080000UL -#define INTC_IPRD 0xf8080002UL - -#define CMI0_IRQ 86 - -#define SCIF0_ERI_IRQ 88 -#define SCIF0_RXI_IRQ 89 -#define SCIF0_BRI_IRQ 90 -#define SCIF0_TXI_IRQ 91 - -#define SCIF1_ERI_IRQ 92 -#define SCIF1_RXI_IRQ 93 -#define SCIF1_BRI_IRQ 94 -#define SCIF1_TXI_IRQ 95 - -#define SCIF2_BRI_IRQ 96 -#define SCIF2_ERI_IRQ 97 -#define SCIF2_RXI_IRQ 98 -#define SCIF2_TXI_IRQ 99 - static struct ipr_data sh7619_ipr_map[] = { - { CMI0_IRQ, INTC_IPRC, 1, 2 }, - { SCIF0_ERI_IRQ, INTC_IPRD, 3, 3 }, - { SCIF0_RXI_IRQ, INTC_IPRD, 3, 3 }, - { SCIF0_BRI_IRQ, INTC_IPRD, 3, 3 }, - { SCIF0_TXI_IRQ, INTC_IPRD, 3, 3 }, - { SCIF1_ERI_IRQ, INTC_IPRD, 2, 3 }, - { SCIF1_RXI_IRQ, INTC_IPRD, 2, 3 }, - { SCIF1_BRI_IRQ, INTC_IPRD, 2, 3 }, - { SCIF1_TXI_IRQ, INTC_IPRD, 2, 3 }, - { SCIF2_ERI_IRQ, INTC_IPRD, 1, 3 }, - { SCIF2_RXI_IRQ, INTC_IPRD, 1, 3 }, - { SCIF2_BRI_IRQ, INTC_IPRD, 1, 3 }, - { SCIF2_TXI_IRQ, INTC_IPRD, 1, 3 }, + { 86, 0, 4, 2 }, /* CMI0 */ + { 88, 1, 12, 3 }, /* SCIF0_ERI */ + { 89, 1, 12, 3 }, /* SCIF0_RXI */ + { 90, 1, 12, 3 }, /* SCIF0_BRI */ + { 91, 1, 12, 3 }, /* SCIF0_TXI */ + { 92, 1, 8, 3 }, /* SCIF1_ERI */ + { 93, 1, 8, 3 }, /* SCIF1_RXI */ + { 94, 1, 8, 3 }, /* SCIF1_BRI */ + { 95, 1, 8, 3 }, /* SCIF1_TXI */ + { 96, 1, 4, 3 }, /* SCIF2_ERI */ + { 97, 1, 4, 3 }, /* SCIF2_RXI */ + { 98, 1, 4, 3 }, /* SCIF2_BRI */ + { 99, 1, 4, 3 }, /* SCIF2_TXI */ }; +static unsigned int ipr_offsets[] = { + 0xf8080000, /* IPRC */ + 0xf8080002, /* IPRD */ + 0xf8080004, /* IPRE */ + 0xf8080006, /* IPRF */ + 0xf8080008, /* IPRG */ +}; + +/* given the IPR index return the address of the IPR register */ +unsigned int map_ipridx_to_addr(int idx) +{ + if (unlikely(idx >= ARRAY_SIZE(ipr_offsets))) + return 0; + return ipr_offsets[idx]; +} + void __init init_IRQ_ipr(void) { make_ipr_irq(sh7619_ipr_map, ARRAY_SIZE(sh7619_ipr_map)); diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c index 4b60fcc..4ed9110 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c @@ -57,55 +57,52 @@ static int __init sh7206_devices_setup(void) } __initcall(sh7206_devices_setup); -#define INTC_IPR08 0xfffe0c04UL -#define INTC_IPR09 0xfffe0c06UL -#define INTC_IPR14 0xfffe0c10UL - -#define CMI0_IRQ 140 - -#define MTU1_TGI1A 164 - -#define SCIF0_BRI_IRQ 240 -#define SCIF0_ERI_IRQ 241 -#define SCIF0_RXI_IRQ 242 -#define SCIF0_TXI_IRQ 243 - -#define SCIF1_BRI_IRQ 244 -#define SCIF1_ERI_IRQ 245 -#define SCIF1_RXI_IRQ 246 -#define SCIF1_TXI_IRQ 247 - -#define SCIF2_BRI_IRQ 248 -#define SCIF2_ERI_IRQ 249 -#define SCIF2_RXI_IRQ 250 -#define SCIF2_TXI_IRQ 251 - -#define SCIF3_BRI_IRQ 252 -#define SCIF3_ERI_IRQ 253 -#define SCIF3_RXI_IRQ 254 -#define SCIF3_TXI_IRQ 255 - static struct ipr_data sh7206_ipr_map[] = { - { CMI0_IRQ, INTC_IPR08, 3, 2 }, - { MTU2_TGI1A, INTC_IPR09, 1, 2 }, - { SCIF0_ERI_IRQ, INTC_IPR14, 3, 3 }, - { SCIF0_RXI_IRQ, INTC_IPR14, 3, 3 }, - { SCIF0_BRI_IRQ, INTC_IPR14, 3, 3 }, - { SCIF0_TXI_IRQ, INTC_IPR14, 3, 3 }, - { SCIF1_ERI_IRQ, INTC_IPR14, 2, 3 }, - { SCIF1_RXI_IRQ, INTC_IPR14, 2, 3 }, - { SCIF1_BRI_IRQ, INTC_IPR14, 2, 3 }, - { SCIF1_TXI_IRQ, INTC_IPR14, 2, 3 }, - { SCIF2_ERI_IRQ, INTC_IPR14, 1, 3 }, - { SCIF2_RXI_IRQ, INTC_IPR14, 1, 3 }, - { SCIF2_BRI_IRQ, INTC_IPR14, 1, 3 }, - { SCIF2_TXI_IRQ, INTC_IPR14, 1, 3 }, - { SCIF3_ERI_IRQ, INTC_IPR14, 0, 3 }, - { SCIF3_RXI_IRQ, INTC_IPR14, 0, 3 }, - { SCIF3_BRI_IRQ, INTC_IPR14, 0, 3 }, - { SCIF3_TXI_IRQ, INTC_IPR14, 0, 3 }, + { 140, 7, 12, 2 }, /* CMI0 */ + { 164, 8, 4, 2 }, /* MTU2_TGI1A */ + { 240, 13, 12, 3 }, /* SCIF0_BRI */ + { 241, 13, 12, 3 }, /* SCIF0_ERI */ + { 242, 13, 12, 3 }, /* SCIF0_RXI */ + { 243, 13, 12, 3 }, /* SCIF0_TXI */ + { 244, 13, 8, 3 }, /* SCIF1_BRI */ + { 245, 13, 8, 3 }, /* SCIF1_ERI */ + { 246, 13, 8, 3 }, /* SCIF1_RXI */ + { 247, 13, 8, 3 }, /* SCIF1_TXI */ + { 248, 13, 4, 3 }, /* SCIF2_BRI */ + { 249, 13, 4, 3 }, /* SCIF2_ERI */ + { 250, 13, 4, 3 }, /* SCIF2_RXI */ + { 251, 13, 4, 3 }, /* SCIF2_TXI */ + { 252, 13, 0, 3 }, /* SCIF3_BRI */ + { 253, 13, 0, 3 }, /* SCIF3_ERI */ + { 254, 13, 0, 3 }, /* SCIF3_RXI */ + { 255, 13, 0, 3 }, /* SCIF3_TXI */ +}; + +static unsigned int ipr_offsets[] = { + 0xfffe0818, /* IPR01 */ + 0xfffe081a, /* IPR02 */ + 0, /* unused */ + 0, /* unused */ + 0xfffe0820, /* IPR05 */ + 0xfffe0c00, /* IPR06 */ + 0xfffe0c02, /* IPR07 */ + 0xfffe0c04, /* IPR08 */ + 0xfffe0c06, /* IPR09 */ + 0xfffe0c08, /* IPR10 */ + 0xfffe0c0a, /* IPR11 */ + 0xfffe0c0c, /* IPR12 */ + 0xfffe0c0e, /* IPR13 */ + 0xfffe0c10, /* IPR14 */ }; +/* given the IPR index return the address of the IPR register */ +unsigned int map_ipridx_to_addr(int idx) +{ + if (unlikely(idx >= ARRAY_SIZE(ipr_offsets))) + return 0; + return ipr_offsets[idx]; +} + void __init init_IRQ_ipr(void) { make_ipr_irq(sh7206_ipr_map, ARRAY_SIZE(sh7206_ipr_map)); -- cgit v0.10.2 From 106dac130d6fb6670a0bbfa8c714054990b41b03 Mon Sep 17 00:00:00 2001 From: SUGIOKA Toshinobu Date: Tue, 19 Dec 2006 12:13:55 +0900 Subject: sh: syscall 300 should be __NR_fstatat64. syscall number 300 fails while testing with latest LTP (ltp-full-20061121.tgz) on sh. sys_fstatat64 is called on syscall 300 (see arch/sh/kernel/syscalls.S), and __ARCH_WANT_STAT64 is defined in include/asm-sh/unistd.h, so following patch seems correct. Signed-off-by: SUGIOKA Toshinobu Signed-off-by: Paul Mundt diff --git a/include/asm-sh/unistd.h b/include/asm-sh/unistd.h index f982073..7d0cd2b 100644 --- a/include/asm-sh/unistd.h +++ b/include/asm-sh/unistd.h @@ -307,7 +307,7 @@ #define __NR_mknodat 297 #define __NR_fchownat 298 #define __NR_futimesat 299 -#define __NR_newfstatat 300 +#define __NR_fstatat64 300 #define __NR_unlinkat 301 #define __NR_renameat 302 #define __NR_linkat 303 -- cgit v0.10.2 From 703404ea441fc198d03ca3e9edbac6e09b5415f4 Mon Sep 17 00:00:00 2001 From: Jamie Lenehan Date: Tue, 19 Dec 2006 12:16:06 +0900 Subject: sh: allow earlyprintk baud rate to be set via command line This allows the baud rate for earlyprintk for sh4 without the standard BIOS to be set via the command line. This uses the same format as i386 and x86_64, which is: earlyprintk=serial,ttySC1,38400 The second parameter (ttySC1 above) is usually the console device name or the io address of the serial port. I allow that to be specified but ignore it in order to keep the format the same as i386/x86_64. Signed-off-by: Jamie Lenehan Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c index 560b91c..9048c03 100644 --- a/arch/sh/kernel/early_printk.c +++ b/arch/sh/kernel/early_printk.c @@ -106,12 +106,32 @@ static struct console scif_console = { }; #if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_STANDARD_BIOS) +#define DEFAULT_BAUD 115200 /* * Simple SCIF init, primarily aimed at SH7750 and other similar SH-4 * devices that aren't using sh-ipl+g. */ -static void scif_sercon_init(int baud) +static void scif_sercon_init(char *s) { + unsigned baud = DEFAULT_BAUD; + char *e; + + if (*s == ',') + ++s; + + if (*s) { + /* ignore ioport/device name */ + s += strcspn(s, ","); + if (*s == ',') + s++; + } + + if (*s) { + baud = simple_strtoul(s, &e, 0); + if (baud == 0 || s == e) + baud = DEFAULT_BAUD; + } + ctrl_outw(0, scif_port.mapbase + 8); ctrl_outw(0, scif_port.mapbase); @@ -167,7 +187,7 @@ int __init setup_early_printk(char *buf) early_console = &scif_console; #if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_STANDARD_BIOS) - scif_sercon_init(115200); + scif_sercon_init(buf + 6); #endif } #endif -- cgit v0.10.2 From 2c081e71baadccb4543815ef42c5290ac2961546 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 25 Dec 2006 18:28:33 +0900 Subject: sh: Fixup R7780RP iVDR clock enable. The iVDR clock enable bit happens to actually reside in a rather different place than what is documented, so fix it up accordingly. This fixes up SATA boot for some of the R7780RP boards that didn't default-enable the clock in the loader. Signed-off-by: Paul Mundt diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c index 9f89c8d..b48f19f 100644 --- a/arch/sh/boards/renesas/r7780rp/setup.c +++ b/arch/sh/boards/renesas/r7780rp/setup.c @@ -148,7 +148,7 @@ static void __init r7780rp_setup(char **cmdline_p) #ifndef CONFIG_SH_R7780MP ctrl_outw(0x0001, PA_SDPOW); /* SD Power ON */ #endif - ctrl_outw(ctrl_inw(PA_IVDRCTL) | 0x0100, PA_IVDRCTL); /* Si13112 */ + ctrl_outw(ctrl_inw(PA_IVDRCTL) | 0x01, PA_IVDRCTL); /* Si13112 */ pm_power_off = r7780rp_power_off; } -- cgit v0.10.2 From f725b5ee1e392ab1299c9317236cf736af1183ab Mon Sep 17 00:00:00 2001 From: Takashi YOSHII Date: Mon, 25 Dec 2006 18:35:24 +0900 Subject: sh: shmin updates. This fixes up shmin (and SH7706/SH7708) IPR support for some of the recent API changes. Signed-off-by: Takashi YOSHII Signed-off-by: Paul Mundt diff --git a/arch/sh/boards/shmin/setup.c b/arch/sh/boards/shmin/setup.c index a31a1d1..bed9ca6 100644 --- a/arch/sh/boards/shmin/setup.c +++ b/arch/sh/boards/shmin/setup.c @@ -12,12 +12,22 @@ #include #include -#define PFC_PHCR 0xa400010e +#define PFC_PHCR 0xa400010eUL +#define INTC_ICR1 0xffd00000UL +#define INTC_IPRC 0xa4000016UL + +static struct ipr_data shmin_ipr_map[] = { + { .irq=32, .addr=INTC_IPRC, .shift= 0, .priority=0 }, + { .irq=33, .addr=INTC_IPRC, .shift= 4, .priority=0 }, + { .irq=34, .addr=INTC_IPRC, .shift= 8, .priority=8 }, + { .irq=35, .addr=INTC_IPRC, .shift=12, .priority=0 }, +}; static void __init init_shmin_irq(void) { ctrl_outw(0x2a00, PFC_PHCR); // IRQ0-3=IRQ ctrl_outw(0x0aaa, INTC_ICR1); // IRQ0-3=IRQ-mode,Low-active. + make_ipr_irq(shmin_ipr_map, ARRAY_SIZE(shmin_ipr_map)); } static void __iomem *shmin_ioport_map(unsigned long port, unsigned int size) diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c index 35eb575..210280b 100644 --- a/arch/sh/kernel/cpu/irq/ipr.c +++ b/arch/sh/kernel/cpu/irq/ipr.c @@ -43,16 +43,29 @@ static struct irq_chip ipr_irq_chip = { .mask_ack = disable_ipr_irq, }; +unsigned int map_ipridx_to_addr(int idx) __attribute__ ((weak)); +unsigned int map_ipridx_to_addr(int idx) +{ + return 0; +} + void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs) { int i; for (i = 0; i < nr_irqs; i++) { unsigned int irq = table[i].irq; - table[i].addr = map_ipridx_to_addr(table[i].ipr_idx); + + if (!irq) + irq = table[i].irq = i; + /* could the IPR index be mapped, if not we ignore this */ - if (table[i].addr == 0) - continue; + if (!table[i].addr) { + table[i].addr = map_ipridx_to_addr(table[i].ipr_idx); + if (!table[i].addr) + continue; + } + disable_irq_nosync(irq); set_irq_chip_and_handler_name(irq, &ipr_irq_chip, handle_level_irq, "level"); diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7709.c b/arch/sh/kernel/cpu/sh3/setup-sh7709.c index ff43ef2..dc9b211 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7709.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7709.c @@ -51,3 +51,24 @@ static int __init sh7709_devices_setup(void) ARRAY_SIZE(sh7709_devices)); } __initcall(sh7709_devices_setup); + +#define IPRx(A,N) .addr=A, .shift=0*N*-1 +#define IPRA(N) IPRx(0xfffffee2UL,N) +#define IPRB(N) IPRx(0xfffffee4UL,N) +#define IPRE(N) IPRx(0xa400001aUL,N) + +static struct ipr_data sh7709_ipr_map[] = { + [16] = { IPRA(15-12), 2 }, /* TMU TUNI0 */ + [17] = { IPRA(11-8), 4 }, /* TMU TUNI1 */ + [22] = { IPRA(3-0), 2 }, /* RTC CUI */ + [23 ... 26] = { IPRB(7-4), 3 }, /* SCI */ + [27] = { IPRB(15-12), 2 }, /* WDT ITI */ + [48 ... 51] = { IPRE(15-12), 7 }, /* DMA */ + [52 ... 55] = { IPRE(11-8), 3 }, /* IRDA */ + [56 ... 59] = { IPRE(7-4), 3 }, /* SCIF */ +}; + +void __init init_IRQ_ipr() +{ + make_ipr_irq(sh7709_ipr_map, ARRAY_SIZE(sh7709_ipr_map)); +} diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 29f4ee3..fddf668 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -72,6 +72,7 @@ config CPU_SUBTYPE_SH7705 config CPU_SUBTYPE_SH7706 bool "Support SH7706 processor" select CPU_SH3 + select CPU_HAS_IPR_IRQ help Select SH7706 if you have a 133 Mhz SH-3 HD6417706 CPU. @@ -92,6 +93,7 @@ config CPU_SUBTYPE_SH7708 config CPU_SUBTYPE_SH7709 bool "Support SH7709 processor" select CPU_SH3 + select CPU_HAS_IPR_IRQ select CPU_HAS_PINT_IRQ help Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU. -- cgit v0.10.2 From 08d2e099fb19ec2edef548a2988c824c8ec0b071 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Fri, 29 Dec 2006 01:44:32 +0900 Subject: sh: Solution Engine 7750's defconfig update. Update se7750_defconfig. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt diff --git a/arch/sh/configs/se7750_defconfig b/arch/sh/configs/se7750_defconfig index 5d357d6..4e6e77f 100644 --- a/arch/sh/configs/se7750_defconfig +++ b/arch/sh/configs/se7750_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Tue Oct 3 11:49:01 2006 +# Linux kernel version: 2.6.20-rc2 +# Thu Dec 28 23:15:49 2006 # CONFIG_SUPERH=y CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -10,6 +10,11 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_TIME is not set +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -35,6 +40,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -116,6 +122,8 @@ CONFIG_SH_SOLUTION_ENGINE=y # CONFIG_SH_LANDISK is not set # CONFIG_SH_TITAN is not set # CONFIG_SH_SHMIN is not set +# CONFIG_SH_7206_SOLUTION_ENGINE is not set +# CONFIG_SH_7619_SOLUTION_ENGINE is not set # CONFIG_SH_UNKNOWN is not set # @@ -127,6 +135,12 @@ CONFIG_CPU_SH4=y # SH-2 Processor Support # # CONFIG_CPU_SUBTYPE_SH7604 is not set +# CONFIG_CPU_SUBTYPE_SH7619 is not set + +# +# SH-2A Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7206 is not set # # SH-3 Processor Support @@ -162,12 +176,14 @@ CONFIG_CPU_SUBTYPE_SH7750=y # # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set # # SH4AL-DSP Processor Support # # CONFIG_CPU_SUBTYPE_SH73180 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set # # Memory management options @@ -177,6 +193,9 @@ CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x02000000 CONFIG_VSYSCALL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_64KB is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -202,17 +221,22 @@ CONFIG_CF_BASE_ADDR=0xb8000000 # Processor features # CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y # CONFIG_SH_DSP is not set # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_IPR_IRQ=y CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y # # Timer support # CONFIG_SH_TMU=y -CONFIG_SH_PCLK_FREQ=50000000 +CONFIG_SH_TIMER_IRQ=16 +# CONFIG_NO_IDLE_HZ is not set +CONFIG_SH_PCLK_FREQ=33333333 # # CPU Frequency scaling @@ -231,10 +255,16 @@ CONFIG_SH_PCLK_FREQ=50000000 CONFIG_HEARTBEAT=y # +# Additional SuperH Device Drivers +# +# CONFIG_PUSH_SWITCH is not set + +# # Kernel features # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 # CONFIG_KEXEC is not set @@ -249,8 +279,7 @@ CONFIG_PREEMPT_NONE=y CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 # CONFIG_UBC_WAKEUP is not set -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttySC1,38400 root=/dev/nfs ip=bootp" +# CONFIG_CMDLINE_BOOL is not set # # Bus options @@ -313,11 +342,13 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -480,16 +511,79 @@ CONFIG_MTD_ROM=y # CONFIG_ATA_OVER_ETH is not set # +# Misc devices +# +# CONFIG_TIFM_CORE is not set + +# # ATA/ATAPI/MFM/RLL support # -# CONFIG_IDE is not set +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set # # Serial ATA (prod) and Parallel ATA (experimental) drivers @@ -633,17 +727,12 @@ CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -659,6 +748,7 @@ CONFIG_HW_RANDOM=y # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -667,18 +757,14 @@ CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_HWMON_DEBUG_CHIP is not set # -# Misc devices -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -758,14 +844,20 @@ CONFIG_FIRMWARE_EDID=y # # +# Virtualization +# + +# # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -814,7 +906,6 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y @@ -875,6 +966,11 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_NLS is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # # CONFIG_PROFILING is not set @@ -882,14 +978,16 @@ CONFIG_PARTITION_ADVANCED=y # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_ENABLE_MUST_CHECK is not set # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_KGDB is not set @@ -908,6 +1006,7 @@ CONFIG_LOG_BUF_SHIFT=14 # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC32=y @@ -915,3 +1014,4 @@ CONFIG_CRC32=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y -- cgit v0.10.2 From aa4a5db52a440d32eab134bfb79d2c9af71eedb4 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Fri, 29 Dec 2006 01:50:35 +0900 Subject: sh: Solution Engine 770x IPR irq setup. Fixups for external IPR IRQs for the SE770x FPGA. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt diff --git a/arch/sh/boards/se/770x/irq.c b/arch/sh/boards/se/770x/irq.c index fcd7cd7..307ca5d 100644 --- a/arch/sh/boards/se/770x/irq.c +++ b/arch/sh/boards/se/770x/irq.c @@ -2,56 +2,96 @@ * linux/arch/sh/boards/se/770x/irq.c * * Copyright (C) 2000 Kazumoto Kojima + * Copyright (C) 2006 Nobuhiro Iwamatsu * * Hitachi SolutionEngine Support. * */ #include +#include #include #include #include #include +/* + * If the problem of make_ipr_irq is solved, + * this code will become unnecessary. :-) + */ +static void se770x_disable_ipr_irq(unsigned int irq) +{ + struct ipr_data *p = get_irq_chip_data(irq); + + ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << p->shift)), p->addr); +} + +static void se770x_enable_ipr_irq(unsigned int irq) +{ + struct ipr_data *p = get_irq_chip_data(irq); + + ctrl_outw(ctrl_inw(p->addr) | (p->priority << p->shift), p->addr); +} + +static struct irq_chip se770x_irq_chip = { + .name = "MS770xSE-FPGA", + .mask = se770x_disable_ipr_irq, + .unmask = se770x_enable_ipr_irq, + .mask_ack = se770x_disable_ipr_irq, +}; + +void make_se770x_irq(struct ipr_data *table, unsigned int nr_irqs) +{ + int i; + + for (i = 0; i < nr_irqs; i++) { + unsigned int irq = table[i].irq; + disable_irq_nosync(irq); + set_irq_chip_and_handler_name(irq, &se770x_irq_chip, + handle_level_irq, "level"); + set_irq_chip_data(irq, &table[i]); + se770x_enable_ipr_irq(irq); + } +} + static struct ipr_data se770x_ipr_map[] = { #if defined(CONFIG_CPU_SUBTYPE_SH7705) /* This is default value */ - { 0xf-0x2, BCR_ILCRA, 2, 0x2 }, - { 0xf-0xa, BCR_ILCRA, 1, 0xa }, - { 0xf-0x5, BCR_ILCRB, 0, 0x5 }, - { 0xf-0x8, BCR_ILCRC, 1, 0x8 }, - { 0xf-0xc, BCR_ILCRC, 0, 0xc }, - { 0xf-0xe, BCR_ILCRD, 3, 0xe }, - { 0xf-0x3, BCR_ILCRD, 1, 0x3 }, /* LAN */ - { 0xf-0xd, BCR_ILCRE, 2, 0xd }, - { 0xf-0x9, BCR_ILCRE, 1, 0x9 }, - { 0xf-0x1, BCR_ILCRE, 0, 0x1 }, - { 0xf-0xf, BCR_ILCRF, 3, 0xf }, - { 0xf-0xb, BCR_ILCRF, 1, 0xb }, - { 0xf-0x7, BCR_ILCRG, 3, 0x7 }, - { 0xf-0x6, BCR_ILCRG, 2, 0x6 }, - { 0xf-0x4, BCR_ILCRG, 1, 0x4 }, + { 0xf-0x2, 0, 8, 0x2 , BCR_ILCRA}, + { 0xf-0xa, 0, 4, 0xa , BCR_ILCRA}, + { 0xf-0x5, 0, 0, 0x5 , BCR_ILCRB}, + { 0xf-0x8, 0, 4, 0x8 , BCR_ILCRC}, + { 0xf-0xc, 0, 0, 0xc , BCR_ILCRC}, + { 0xf-0xe, 0, 12, 0xe , BCR_ILCRD}, + { 0xf-0x3, 0, 4, 0x3 , BCR_ILCRD}, /* LAN */ + { 0xf-0xd, 0, 8, 0xd , BCR_ILCRE}, + { 0xf-0x9, 0, 4, 0x9 , BCR_ILCRE}, + { 0xf-0x1, 0, 0, 0x1 , BCR_ILCRE}, + { 0xf-0xf, 0, 12, 0xf , BCR_ILCRF}, + { 0xf-0xb, 0, 4, 0xb , BCR_ILCRF}, + { 0xf-0x7, 0, 12, 0x7 , BCR_ILCRG}, + { 0xf-0x6, 0, 8, 0x6 , BCR_ILCRG}, + { 0xf-0x4, 0, 4, 0x4 , BCR_ILCRG}, #else - { 14, BCR_ILCRA, 2, 0x0f-14 }, - { 12, BCR_ILCRA, 1, 0x0f-12 }, - { 8, BCR_ILCRB, 1, 0x0f- 8 }, - { 6, BCR_ILCRC, 3, 0x0f- 6 }, - { 5, BCR_ILCRC, 2, 0x0f- 5 }, - { 4, BCR_ILCRC, 1, 0x0f- 4 }, - { 3, BCR_ILCRC, 0, 0x0f- 3 }, - { 1, BCR_ILCRD, 3, 0x0f- 1 }, - - { 10, BCR_ILCRD, 1, 0x0f-10 }, /* LAN */ - - { 0, BCR_ILCRE, 3, 0x0f- 0 }, /* PCIRQ3 */ - { 11, BCR_ILCRE, 2, 0x0f-11 }, /* PCIRQ2 */ - { 9, BCR_ILCRE, 1, 0x0f- 9 }, /* PCIRQ1 */ - { 7, BCR_ILCRE, 0, 0x0f- 7 }, /* PCIRQ0 */ - + { 14, 0, 8, 0x0f-14 ,BCR_ILCRA}, + { 12, 0, 4, 0x0f-12 ,BCR_ILCRA}, + { 8, 0, 4, 0x0f- 8 ,BCR_ILCRB}, + { 6, 0, 12, 0x0f- 6 ,BCR_ILCRC}, + { 5, 0, 8, 0x0f- 5 ,BCR_ILCRC}, + { 4, 0, 4, 0x0f- 4 ,BCR_ILCRC}, + { 3, 0, 0, 0x0f- 3 ,BCR_ILCRC}, + { 1, 0, 12, 0x0f- 1 ,BCR_ILCRD}, + /* ST NIC */ + { 10, 0, 4, 0x0f-10 ,BCR_ILCRD}, /* LAN */ + /* MRSHPC IRQs setting */ + { 0, 0, 12, 0x0f- 0 ,BCR_ILCRE}, /* PCIRQ3 */ + { 11, 0, 8, 0x0f-11 ,BCR_ILCRE}, /* PCIRQ2 */ + { 9, 0, 4, 0x0f- 9 ,BCR_ILCRE}, /* PCIRQ1 */ + { 7, 0, 0, 0x0f- 7 ,BCR_ILCRE}, /* PCIRQ0 */ /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */ /* NOTE: #2 and #13 are not used on PC */ - { 13, BCR_ILCRG, 1, 0x0f-13 }, /* SLOTIRQ2 */ - { 2, BCR_ILCRG, 0, 0x0f- 2 }, /* SLOTIRQ1 */ + { 13, 0, 4, 0x0f-13 ,BCR_ILCRG}, /* SLOTIRQ2 */ + { 2, 0, 0, 0x0f- 2 ,BCR_ILCRG}, /* SLOTIRQ1 */ #endif }; @@ -81,5 +121,5 @@ void __init init_se_IRQ(void) ctrl_outw(0, BCR_ILCRF); ctrl_outw(0, BCR_ILCRG); #endif - make_ipr_irq(se770x_ipr_map, ARRAY_SIZE(se770x_ipr_map)); + make_se770x_irq(se770x_ipr_map, ARRAY_SIZE(se770x_ipr_map)); } diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c index a1d51d5..84f2e48 100644 --- a/arch/sh/boards/se/770x/setup.c +++ b/arch/sh/boards/se/770x/setup.c @@ -1,5 +1,4 @@ -/* $Id: setup.c,v 1.1.2.4 2002/03/02 21:57:07 lethal Exp $ - * +/* * linux/arch/sh/boards/se/770x/setup.c * * Copyright (C) 2000 Kazumoto Kojima @@ -36,11 +35,6 @@ static void __init smsc_setup(char **cmdline_p) smsc_config(ACTIVATE_INDEX, 0x01); smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */ - /* IDE1 */ - smsc_config(CURRENT_LDN_INDEX, LDN_IDE1); - smsc_config(ACTIVATE_INDEX, 0x01); - smsc_config(IRQ_SELECT_INDEX, 14); /* IRQ14 */ - /* AUXIO (GPIO): to use IDE1 */ smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO); smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */ -- cgit v0.10.2 From 7a847f819063b80cc5b38d39e8aad4d60f6ca2fd Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 26 Dec 2006 15:29:19 +0900 Subject: sh: More tidying for large base pages. There were a few more things that needed fixing up, namely THREAD_SIZE and the TLB miss handler where certain PTRS_PER_PGD == PTRS_PER_PTE assumptions were being made. Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 4f38912..04cbc88 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -596,6 +596,8 @@ menu "Boot options" config ZERO_PAGE_OFFSET hex "Zero page offset" default "0x00004000" if SH_MPC1211 || SH_SH03 + default "0x00010000" if PAGE_SIZE_64KB + default "0x00002000" if PAGE_SIZE_8KB default "0x00001000" help This sets the default offset of zero page. diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index 014ac37..1c52035 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -332,12 +332,6 @@ general_exception: ! ! -/* This code makes some assumptions to improve performance. - * Make sure they are stil true. */ -#if PTRS_PER_PGD != PTRS_PER_PTE -#error PGD and PTE sizes don't match -#endif - /* gas doesn't flag impossible values for mov #immediate as an error */ #if (_PAGE_PRESENT >> 2) > 0x7f #error cannot load PAGE_PRESENT as an immediate @@ -399,6 +393,7 @@ tlb_miss: bt 20f ! 110 BR + mov.w 3f, k3 ! 8 LS (latency=2) (PTRS_PER_PTE-1) << 2 and k3, k0 ! 78 EX mov.w 5f, k4 ! 8 LS (latency=2) _PAGE_PRESENT @@ -491,8 +486,9 @@ tlb_miss: .align 5 ! Once cache line if possible... 1: .long swapper_pg_dir +3: .short (PTRS_PER_PTE-1) << 2 4: .short (PTRS_PER_PGD-1) << 2 -5: .short _PAGE_PRESENT +5: .long _PAGE_PRESENT 7: .long _PAGE_FLAGS_HARDWARE_MASK 8: .long MMU_PTEH #ifdef COUNT_EXCEPTIONS diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h index 036ca28..eba1418 100644 --- a/include/asm-sh/pgtable.h +++ b/include/asm-sh/pgtable.h @@ -47,13 +47,13 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; #define PGDIR_MASK (~(PGDIR_SIZE-1)) /* Entries per level */ -#define PTRS_PER_PTE (PAGE_SIZE / 4) +#define PTRS_PER_PTE (PAGE_SIZE / (1 << PTE_MAGNITUDE)) #define PTRS_PER_PGD (PAGE_SIZE / 4) #define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE) #define FIRST_USER_ADDRESS 0 -#define PTE_PHYS_MASK 0x1ffff000 +#define PTE_PHYS_MASK (0x20000000 - PAGE_SIZE) /* * First 1MB map is used by fixed purpose. diff --git a/include/asm-sh/thread_info.h b/include/asm-sh/thread_info.h index 879f741..279e70a 100644 --- a/include/asm-sh/thread_info.h +++ b/include/asm-sh/thread_info.h @@ -32,12 +32,20 @@ struct thread_info { #define PREEMPT_ACTIVE 0x10000000 -#ifdef CONFIG_4KSTACKS -#define THREAD_SIZE (PAGE_SIZE) +#if defined(CONFIG_4KSTACKS) +#define THREAD_SIZE_ORDER (0) +#elif defined(CONFIG_PAGE_SIZE_4KB) +#define THREAD_SIZE_ORDER (1) +#elif defined(CONFIG_PAGE_SIZE_8KB) +#define THREAD_SIZE_ORDER (1) +#elif defined(CONFIG_PAGE_SIZE_64KB) +#define THREAD_SIZE_ORDER (0) #else -#define THREAD_SIZE (PAGE_SIZE * 2) +#error "Unknown thread size" #endif -#define STACK_WARN (THREAD_SIZE / 8) + +#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER) +#define STACK_WARN (THREAD_SIZE >> 3) /* * macros/functions for gaining access to the thread information structure -- cgit v0.10.2 From 26b7a78c55fbc0e23a7dc19e89fd50f200efc002 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 28 Dec 2006 10:31:48 +0900 Subject: sh: Lazy dcache writeback optimizations. This converts the lazy dcache handling to the model described in Documentation/cachetlb.txt and drops the ptep_get_and_clear() hacks used for the aliasing dcaches on SH-4 and SH7705 in 32kB mode. As a bonus, this slightly cuts down on the cache flushing frequency. With that and the PTEA handling out of the way, the update_mmu_cache() implementations can be consolidated, and we no longer have to worry about which configuration the cache is in for the SH7705 case. And finally, explicitly disable the lazy writeback on SMP (SH-4A). Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c index 9031a22..b26e2bc 100644 --- a/arch/sh/kernel/cpu/sh4/probe.c +++ b/arch/sh/kernel/cpu/sh4/probe.c @@ -181,10 +181,6 @@ int __init detect_cpu_and_cache_system(void) cpu_data->dcache.ways = 1; #endif -#ifdef CONFIG_CPU_HAS_PTEA - cpu_data->flags |= CPU_HAS_PTEA; -#endif - /* * On anything that's not a direct-mapped cache, look to the CVR * for I/D-cache specifics. diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index fddf668..28b5102 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -20,7 +20,7 @@ config CPU_SH4 bool select CPU_HAS_INTEVT select CPU_HAS_SR_RB - select CPU_HAS_PTEA if !CPU_SUBTYPE_ST40 + select CPU_HAS_PTEA if (!CPU_SUBTYPE_ST40 && !CPU_SH4A) || CPU_SHX2 config CPU_SH4A bool diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c index c695515..72bb487 100644 --- a/arch/sh/mm/cache-sh4.c +++ b/arch/sh/mm/cache-sh4.c @@ -236,10 +236,20 @@ static inline void flush_cache_4096(unsigned long start, /* * Write back & invalidate the D-cache of the page. * (To avoid "alias" issues) + * + * This uses a lazy write-back on UP, which is explicitly + * disabled on SMP. */ void flush_dcache_page(struct page *page) { - if (test_bit(PG_mapped, &page->flags)) { +#ifndef CONFIG_SMP + struct address_space *mapping = page_mapping(page); + + if (mapping && !mapping_mapped(mapping)) + set_bit(PG_dcache_dirty, &page->flags); + else +#endif + { unsigned long phys = PHYSADDR(page_address(page)); unsigned long addr = CACHE_OC_ADDRESS_ARRAY; int i, n; diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c index 045abdf..2808b58 100644 --- a/arch/sh/mm/cache-sh7705.c +++ b/arch/sh/mm/cache-sh7705.c @@ -3,11 +3,11 @@ * * Copyright (C) 1999, 2000 Niibe Yutaka * Copyright (C) 2004 Alex Song + * Copyright (C) 2006 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. - * */ #include #include @@ -51,7 +51,6 @@ static inline void cache_wback_all(void) if ((data & v) == v) ctrl_outl(data & ~v, addr); - } addrstart += cpu_data->dcache.way_incr; @@ -128,7 +127,11 @@ static void __flush_dcache_page(unsigned long phys) */ void flush_dcache_page(struct page *page) { - if (test_bit(PG_mapped, &page->flags)) + struct address_space *mapping = page_mapping(page); + + if (mapping && !mapping_mapped(mapping)) + set_bit(PG_dcache_dirty, &page->flags); + else __flush_dcache_page(PHYSADDR(page_address(page))); } diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c index 3f98d2a..cfc3235 100644 --- a/arch/sh/mm/pg-sh4.c +++ b/arch/sh/mm/pg-sh4.c @@ -23,7 +23,6 @@ extern struct mutex p3map_mutex[]; */ void clear_user_page(void *to, unsigned long address, struct page *page) { - __set_bit(PG_mapped, &page->flags); if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) clear_page(to); else { @@ -59,7 +58,6 @@ void clear_user_page(void *to, unsigned long address, struct page *page) void copy_user_page(void *to, void *from, unsigned long address, struct page *page) { - __set_bit(PG_mapped, &page->flags); if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) copy_page(to, from); else { @@ -84,23 +82,3 @@ void copy_user_page(void *to, void *from, unsigned long address, mutex_unlock(&p3map_mutex[(address & CACHE_ALIAS)>>12]); } } - -/* - * For SH-4, we have our own implementation for ptep_get_and_clear - */ -inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) -{ - pte_t pte = *ptep; - - pte_clear(mm, addr, ptep); - if (!pte_not_present(pte)) { - unsigned long pfn = pte_pfn(pte); - if (pfn_valid(pfn)) { - struct page *page = pfn_to_page(pfn); - struct address_space *mapping = page_mapping(page); - if (!mapping || !mapping_writably_mapped(mapping)) - __clear_bit(PG_mapped, &page->flags); - } - } - return pte; -} diff --git a/arch/sh/mm/pg-sh7705.c b/arch/sh/mm/pg-sh7705.c index ff9ece9..b052d0f 100644 --- a/arch/sh/mm/pg-sh7705.c +++ b/arch/sh/mm/pg-sh7705.c @@ -7,9 +7,7 @@ * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. - * */ - #include #include #include @@ -76,7 +74,6 @@ void clear_user_page(void *to, unsigned long address, struct page *pg) { struct page *page = virt_to_page(to); - __set_bit(PG_mapped, &page->flags); if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) { clear_page(to); __flush_wback_region(to, PAGE_SIZE); @@ -95,12 +92,11 @@ void clear_user_page(void *to, unsigned long address, struct page *pg) * @from: P1 address * @address: U0 address to be mapped */ -void copy_user_page(void *to, void *from, unsigned long address, struct page *pg) +void copy_user_page(void *to, void *from, unsigned long address, + struct page *pg) { struct page *page = virt_to_page(to); - - __set_bit(PG_mapped, &page->flags); if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) { copy_page(to, from); __flush_wback_region(to, PAGE_SIZE); @@ -112,26 +108,3 @@ void copy_user_page(void *to, void *from, unsigned long address, struct page *pg __flush_wback_region(to, PAGE_SIZE); } } - -/* - * For SH7705, we have our own implementation for ptep_get_and_clear - * Copied from pg-sh4.c - */ -inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) -{ - pte_t pte = *ptep; - - pte_clear(mm, addr, ptep); - if (!pte_not_present(pte)) { - unsigned long pfn = pte_pfn(pte); - if (pfn_valid(pfn)) { - struct page *page = pfn_to_page(pfn); - struct address_space *mapping = page_mapping(page); - if (!mapping || !mapping_writably_mapped(mapping)) - __clear_bit(PG_mapped, &page->flags); - } - } - - return pte; -} - diff --git a/arch/sh/mm/tlb-flush.c b/arch/sh/mm/tlb-flush.c index 73ec7f6..9347534 100644 --- a/arch/sh/mm/tlb-flush.c +++ b/arch/sh/mm/tlb-flush.c @@ -2,15 +2,17 @@ * TLB flushing operations for SH with an MMU. * * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2003 - 2006 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ #include +#include #include #include +#include void flush_tlb_page(struct vm_area_struct *vma, unsigned long page) { @@ -132,3 +134,54 @@ void flush_tlb_all(void) ctrl_barrier(); local_irq_restore(flags); } + +void update_mmu_cache(struct vm_area_struct *vma, + unsigned long address, pte_t pte) +{ + unsigned long flags; + unsigned long pteval; + unsigned long vpn; + struct page *page; + unsigned long pfn = pte_pfn(pte); + struct address_space *mapping; + + if (!pfn_valid(pfn)) + return; + + page = pfn_to_page(pfn); + mapping = page_mapping(page); + if (mapping) { + unsigned long phys = pte_val(pte) & PTE_PHYS_MASK; + int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags); + + if (dirty) + __flush_wback_region((void *)P1SEGADDR(phys), + PAGE_SIZE); + } + + local_irq_save(flags); + + /* Set PTEH register */ + vpn = (address & MMU_VPN_MASK) | get_asid(); + ctrl_outl(vpn, MMU_PTEH); + + pteval = pte_val(pte); + +#ifdef CONFIG_CPU_HAS_PTEA + /* Set PTEA register */ + /* TODO: make this look less hacky */ + ctrl_outl(((pteval >> 28) & 0xe) | (pteval & 0x1), MMU_PTEA); +#endif + + /* Set PTEL register */ + pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */ +#ifdef CONFIG_SH_WRITETHROUGH + pteval |= _PAGE_WT; +#endif + /* conveniently, we want all the software flags to be 0 anyway */ + ctrl_outl(pteval, MMU_PTEL); + + /* Load the TLB */ + asm volatile("ldtlb": /* no output */ : /* no input */ : "memory"); + local_irq_restore(flags); +} diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c index 46b09e2..1662706 100644 --- a/arch/sh/mm/tlb-sh3.c +++ b/arch/sh/mm/tlb-sh3.c @@ -8,69 +8,9 @@ * * Released under the terms of the GNU GPL v2.0. */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - +#include #include -#include -#include -#include #include -#include - -void update_mmu_cache(struct vm_area_struct * vma, - unsigned long address, pte_t pte) -{ - unsigned long flags; - unsigned long pteval; - unsigned long vpn; - - /* Ptrace may call this routine. */ - if (vma && current->active_mm != vma->vm_mm) - return; - -#if defined(CONFIG_SH7705_CACHE_32KB) - { - struct page *page = pte_page(pte); - unsigned long pfn = pte_pfn(pte); - - if (pfn_valid(pfn) && !test_bit(PG_mapped, &page->flags)) { - unsigned long phys = pte_val(pte) & PTE_PHYS_MASK; - - __flush_wback_region((void *)P1SEGADDR(phys), - PAGE_SIZE); - __set_bit(PG_mapped, &page->flags); - } - } -#endif - - local_irq_save(flags); - - /* Set PTEH register */ - vpn = (address & MMU_VPN_MASK) | get_asid(); - ctrl_outl(vpn, MMU_PTEH); - - pteval = pte_val(pte); - - /* Set PTEL register */ - pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */ - /* conveniently, we want all the software flags to be 0 anyway */ - ctrl_outl(pteval, MMU_PTEL); - - /* Load the TLB */ - asm volatile("ldtlb": /* no output */ : /* no input */ : "memory"); - local_irq_restore(flags); -} void __flush_tlb_page(unsigned long asid, unsigned long page) { @@ -94,4 +34,3 @@ void __flush_tlb_page(unsigned long asid, unsigned long page) for (i = 0; i < ways; i++) ctrl_outl(data, addr + (i << 8)); } - diff --git a/arch/sh/mm/tlb-sh4.c b/arch/sh/mm/tlb-sh4.c index 812b2d5..758d8de 100644 --- a/arch/sh/mm/tlb-sh4.c +++ b/arch/sh/mm/tlb-sh4.c @@ -8,74 +8,9 @@ * * Released under the terms of the GNU GPL v2.0. */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - +#include #include -#include -#include -#include #include -#include - -void update_mmu_cache(struct vm_area_struct * vma, - unsigned long address, pte_t pte) -{ - unsigned long flags; - unsigned long pteval; - unsigned long vpn; - struct page *page; - unsigned long pfn; - - /* Ptrace may call this routine. */ - if (vma && current->active_mm != vma->vm_mm) - return; - - pfn = pte_pfn(pte); - if (pfn_valid(pfn)) { - page = pfn_to_page(pfn); - if (!test_bit(PG_mapped, &page->flags)) { - unsigned long phys = pte_val(pte) & PTE_PHYS_MASK; - __flush_wback_region((void *)P1SEGADDR(phys), PAGE_SIZE); - __set_bit(PG_mapped, &page->flags); - } - } - - local_irq_save(flags); - - /* Set PTEH register */ - vpn = (address & MMU_VPN_MASK) | get_asid(); - ctrl_outl(vpn, MMU_PTEH); - - pteval = pte_val(pte); - - /* Set PTEA register */ - if (cpu_data->flags & CPU_HAS_PTEA) - /* TODO: make this look less hacky */ - ctrl_outl(((pteval >> 28) & 0xe) | (pteval & 0x1), MMU_PTEA); - - /* Set PTEL register */ - pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */ -#ifdef CONFIG_SH_WRITETHROUGH - pteval |= _PAGE_WT; -#endif - /* conveniently, we want all the software flags to be 0 anyway */ - ctrl_outl(pteval, MMU_PTEL); - - /* Load the TLB */ - asm volatile("ldtlb": /* no output */ : /* no input */ : "memory"); - local_irq_restore(flags); -} void __flush_tlb_page(unsigned long asid, unsigned long page) { @@ -93,4 +28,3 @@ void __flush_tlb_page(unsigned long asid, unsigned long page) ctrl_outl(data, addr); back_to_P1(); } - diff --git a/include/asm-sh/cacheflush.h b/include/asm-sh/cacheflush.h index 07f62ec..22f1263 100644 --- a/include/asm-sh/cacheflush.h +++ b/include/asm-sh/cacheflush.h @@ -30,5 +30,8 @@ extern void __flush_invalidate_region(void *start, int size); #define HAVE_ARCH_UNMAPPED_AREA +/* Page flag for lazy dcache write-back for the aliasing UP caches */ +#define PG_dcache_dirty PG_arch_1 + #endif /* __KERNEL__ */ #endif /* __ASM_SH_CACHEFLUSH_H */ diff --git a/include/asm-sh/cpu-sh3/cacheflush.h b/include/asm-sh/cpu-sh3/cacheflush.h index f70d8ef7..6fabbba 100644 --- a/include/asm-sh/cpu-sh3/cacheflush.h +++ b/include/asm-sh/cpu-sh3/cacheflush.h @@ -36,8 +36,6 @@ /* 32KB cache, 4kb PAGE sizes need to check bit 12 */ #define CACHE_ALIAS 0x00001000 -#define PG_mapped PG_arch_1 - void flush_cache_all(void); void flush_cache_mm(struct mm_struct *mm); #define flush_cache_dup_mm(mm) flush_cache_mm(mm) diff --git a/include/asm-sh/cpu-sh4/cacheflush.h b/include/asm-sh/cpu-sh4/cacheflush.h index b01a10f..f563c3b 100644 --- a/include/asm-sh/cpu-sh4/cacheflush.h +++ b/include/asm-sh/cpu-sh4/cacheflush.h @@ -38,16 +38,4 @@ void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, /* Initialization of P3 area for copy_user_page */ void p3_cache_init(void); -#define PG_mapped PG_arch_1 - -#ifdef CONFIG_MMU -extern int remap_area_pages(unsigned long addr, unsigned long phys_addr, - unsigned long size, unsigned long flags); -#else /* CONFIG_MMU */ -static inline int remap_area_pages(unsigned long addr, unsigned long phys_addr, - unsigned long size, unsigned long flags) -{ - return 0; -} -#endif /* CONFIG_MMU */ #endif /* __ASM_CPU_SH4_CACHEFLUSH_H */ diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h index eba1418..3721a44 100644 --- a/include/asm-sh/pgtable.h +++ b/include/asm-sh/pgtable.h @@ -583,11 +583,6 @@ struct mm_struct; extern unsigned int kobjsize(const void *objp); #endif /* !CONFIG_MMU */ -#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB) -#define __HAVE_ARCH_PTEP_GET_AND_CLEAR -extern pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep); -#endif - extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; extern void paging_init(void); -- cgit v0.10.2 From adac9570966eb2eb137209e552b258d4d1d4825b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 28 Dec 2006 10:54:01 +0900 Subject: sh: Don't set reserved _PAGE_WT bit on SH-3. Only SH-4 needs to set _PAGE_WT when using write-through caching, don't attempt to set it on SH-3 where it ends up being a reserved bit. Signed-off-by: Paul Mundt diff --git a/arch/sh/mm/tlb-flush.c b/arch/sh/mm/tlb-flush.c index 9347534..ef3e4d4 100644 --- a/arch/sh/mm/tlb-flush.c +++ b/arch/sh/mm/tlb-flush.c @@ -175,7 +175,7 @@ void update_mmu_cache(struct vm_area_struct *vma, /* Set PTEL register */ pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */ -#ifdef CONFIG_SH_WRITETHROUGH +#if defined(CONFIG_SH_WRITETHROUGH) && defined(CONFIG_CPU_SH4) pteval |= _PAGE_WT; #endif /* conveniently, we want all the software flags to be 0 anyway */ -- cgit v0.10.2 From 86b67ef7518d1fcd4489dc464d4c33a274a1c635 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Mon, 1 Jan 2007 09:21:43 +0900 Subject: sh: Fix handle_BUG() compile error. handle_BUG() uses TRAPA_BUG_OPCODE which is only defined for CONFIG_BUG, make sure it's not built when CONFIG_BUG=n. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c index ec11015..e91224f 100644 --- a/arch/sh/kernel/traps.c +++ b/arch/sh/kernel/traps.c @@ -156,13 +156,13 @@ static inline void do_bug_verbose(struct pt_regs *regs) { } #endif /* CONFIG_DEBUG_BUGVERBOSE */ -#endif /* CONFIG_BUG */ void handle_BUG(struct pt_regs *regs) { do_bug_verbose(regs); die("Kernel BUG", regs, TRAPA_BUG_OPCODE & 0xff); } +#endif /* CONFIG_BUG */ /* * handle an instruction that does an unaligned memory access by emulating the -- cgit v0.10.2 From 6dcda6f1ecef86209ac161631837bc57172ba049 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Thu, 25 Jan 2007 15:21:03 +0900 Subject: sh: add SH7760 IPR IRQ data Add SH7760 IPR IRQ data; makes 2.6.20-rc bootable again. Signed-off-by: Manuel Lauss Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c index 07e5377..b7c7028 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c @@ -52,17 +52,11 @@ static int __init sh7760_devices_setup(void) } __initcall(sh7760_devices_setup); -/* - * SH7760 INTC2-Style interrupts, vectors IRQ48-111 INTEVT 0x800-0xFE0 - */ static struct intc2_data intc2_irq_table[] = { - /* INTPRIO0 | INTMSK0 */ {48, 0, 28, 0, 31, 3}, /* IRQ 4 */ {49, 0, 24, 0, 30, 3}, /* IRQ 3 */ {50, 0, 20, 0, 29, 3}, /* IRQ 2 */ {51, 0, 16, 0, 28, 3}, /* IRQ 1 */ - /* 52-55 (INTEVT 0x880-0x8E0) unused/reserved */ - /* INTPRIO4 | INTMSK0 */ {56, 4, 28, 0, 25, 3}, /* HCAN2_CHAN0 */ {57, 4, 24, 0, 24, 3}, /* HCAN2_CHAN1 */ {58, 4, 20, 0, 23, 3}, /* I2S_CHAN0 */ @@ -71,18 +65,15 @@ static struct intc2_data intc2_irq_table[] = { {61, 4, 8, 0, 20, 3}, /* AC97_CHAN1 */ {62, 4, 4, 0, 19, 3}, /* I2C_CHAN0 */ {63, 4, 0, 0, 18, 3}, /* I2C_CHAN1 */ - /* INTPRIO8 | INTMSK0 */ {52, 8, 16, 0, 11, 3}, /* SCIF0_ERI_IRQ */ {53, 8, 16, 0, 10, 3}, /* SCIF0_RXI_IRQ */ {54, 8, 16, 0, 9, 3}, /* SCIF0_BRI_IRQ */ {55, 8, 16, 0, 8, 3}, /* SCIF0_TXI_IRQ */ {64, 8, 28, 0, 17, 3}, /* USBHI_IRQ */ {65, 8, 24, 0, 16, 3}, /* LCDC */ - /* 66, 67 unused */ {68, 8, 20, 0, 14, 13}, /* DMABRGI0_IRQ */ {69, 8, 20, 0, 13, 13}, /* DMABRGI1_IRQ */ {70, 8, 20, 0, 12, 13}, /* DMABRGI2_IRQ */ - /* 71 unused */ {72, 8, 12, 0, 7, 3}, /* SCIF1_ERI_IRQ */ {73, 8, 12, 0, 6, 3}, /* SCIF1_RXI_IRQ */ {74, 8, 12, 0, 5, 3}, /* SCIF1_BRI_IRQ */ @@ -91,26 +82,71 @@ static struct intc2_data intc2_irq_table[] = { {77, 8, 8, 0, 2, 3}, /* SCIF2_RXI_IRQ */ {78, 8, 8, 0, 1, 3}, /* SCIF2_BRI_IRQ */ {79, 8, 8, 0, 0, 3}, /* SCIF2_TXI_IRQ */ - /* | INTMSK4 */ {80, 8, 4, 4, 23, 3}, /* SIM_ERI */ {81, 8, 4, 4, 22, 3}, /* SIM_RXI */ {82, 8, 4, 4, 21, 3}, /* SIM_TXI */ {83, 8, 4, 4, 20, 3}, /* SIM_TEI */ {84, 8, 0, 4, 19, 3}, /* HSPII */ - /* INTPRIOC | INTMSK4 */ - /* 85-87 unused/reserved */ {88, 12, 20, 4, 18, 3}, /* MMCI0 */ {89, 12, 20, 4, 17, 3}, /* MMCI1 */ {90, 12, 20, 4, 16, 3}, /* MMCI2 */ {91, 12, 20, 4, 15, 3}, /* MMCI3 */ - {92, 12, 12, 4, 6, 3}, /* MFI (unsure, bug? in my 7760 manual*/ - /* 93-107 reserved/undocumented */ + {92, 12, 12, 4, 6, 3}, /* MFI */ {108,12, 4, 4, 1, 3}, /* ADC */ {109,12, 0, 4, 0, 3}, /* CMTI */ - /* 110-111 reserved/unused */ }; +static struct ipr_data sh7760_ipr_map[] = { + /* IRQ, IPR-idx, shift, priority */ + { 16, 0, 12, 2 }, /* TMU0 TUNI*/ + { 17, 0, 8, 2 }, /* TMU1 TUNI */ + { 18, 0, 4, 2 }, /* TMU2 TUNI */ + { 19, 0, 4, 2 }, /* TMU2 TIPCI */ + { 27, 1, 12, 2 }, /* WDT ITI */ + { 28, 1, 8, 2 }, /* REF RCMI */ + { 29, 1, 8, 2 }, /* REF ROVI */ + { 32, 2, 0, 7 }, /* HUDI */ + { 33, 2, 12, 7 }, /* GPIOI */ + { 34, 2, 8, 7 }, /* DMAC DMTE0 */ + { 35, 2, 8, 7 }, /* DMAC DMTE1 */ + { 36, 2, 8, 7 }, /* DMAC DMTE2 */ + { 37, 2, 8, 7 }, /* DMAC DMTE3 */ + { 38, 2, 8, 7 }, /* DMAC DMAE */ + { 44, 2, 8, 7 }, /* DMAC DMTE4 */ + { 45, 2, 8, 7 }, /* DMAC DMTE5 */ + { 46, 2, 8, 7 }, /* DMAC DMTE6 */ + { 47, 2, 8, 7 }, /* DMAC DMTE7 */ +/* these here are only valid if INTC_ICR bit 7 is set to 1! + * XXX: maybe CONFIG_SH_IRLMODE symbol? SH7751 could use it too */ +#if 0 + { 2, 3, 12, 3 }, /* IRL0 */ + { 5, 3, 8, 3 }, /* IRL1 */ + { 8, 3, 4, 3 }, /* IRL2 */ + { 11, 3, 0, 3 }, /* IRL3 */ +#endif +}; + +static unsigned long ipr_offsets[] = { + 0xffd00004UL, /* 0: IPRA */ + 0xffd00008UL, /* 1: IPRB */ + 0xffd0000cUL, /* 2: IPRC */ + 0xffd00010UL, /* 3: IPRD */ +}; + +/* given the IPR index return the address of the IPR register */ +unsigned int map_ipridx_to_addr(int idx) +{ + if (idx >= ARRAY_SIZE(ipr_offsets)) + return 0; + return ipr_offsets[idx]; +} + void __init init_IRQ_intc2(void) { make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table)); } + +void __init init_IRQ_ipr(void) +{ + make_ipr_irq(sh7760_ipr_map, ARRAY_SIZE(sh7760_ipr_map)); +} diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 28b5102..6b0d28a 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -151,6 +151,7 @@ config CPU_SUBTYPE_SH7760 bool "Support SH7760 processor" select CPU_SH4 select CPU_HAS_INTC2_IRQ + select CPU_HAS_IPR_IRQ config CPU_SUBTYPE_SH4_202 bool "Support SH4-202 processor" -- cgit v0.10.2 From 9f8a5e3a44d81bbf19fddeb74645dec6b0e23b23 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Thu, 25 Jan 2007 15:22:11 +0900 Subject: sh: SH-DMAC compile fixes This patch does the following: - remove the make_ipr_irq stuff from dma-sh.c and replace it with a simple channel<->irq mapping table. - add DMTEx_IRQ constants for sh4 cpus - fix sh7751 DMAE irq number The SH7780 uses the same IRQs for DMA as other SH4 types, so I put the constants on top of the dma.h file. Other CPU types need to #define their own DMTEx_IRQ contants in their appropriate header. Signed-off-by: Manuel Lauss Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index f63721e..06ed060 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -19,34 +19,26 @@ #include #include "dma-sh.h" - - -#ifdef CONFIG_CPU_SH4 -static struct ipr_data dmae_ipr_map[] = { - { DMAE_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, -}; +static int dmte_irq_map[] = { + DMTE0_IRQ, + DMTE1_IRQ, + DMTE2_IRQ, + DMTE3_IRQ, +#if defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ + defined(CONFIG_CPU_SUBTYPE_SH7760) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) + DMTE4_IRQ, + DMTE5_IRQ, + DMTE6_IRQ, + DMTE7_IRQ, #endif -static struct ipr_data dmte_ipr_map[] = { - /* - * Normally we could just do DMTE0_IRQ + chan outright, though in the - * case of the 7751R, the DMTE IRQs for channels > 4 start right above - * the SCIF - */ - { DMTE0_IRQ + 0, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, - { DMTE0_IRQ + 1, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, - { DMTE0_IRQ + 2, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, - { DMTE0_IRQ + 3, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, - { DMTE4_IRQ + 0, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, - { DMTE4_IRQ + 1, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, - { DMTE4_IRQ + 2, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, - { DMTE4_IRQ + 3, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, }; static inline unsigned int get_dmte_irq(unsigned int chan) { unsigned int irq = 0; - if (chan < ARRAY_SIZE(dmte_ipr_map)) - irq = dmte_ipr_map[chan].irq; + if (chan < ARRAY_SIZE(dmte_irq_map)) + irq = dmte_irq_map[chan]; return irq; } @@ -103,7 +95,7 @@ static void sh_dmac_free_dma(struct dma_channel *chan) free_irq(get_dmte_irq(chan->chan), chan); } -static void +static int sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr) { if (!chcr) @@ -119,6 +111,7 @@ sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr) ctrl_outl(chcr, CHCR[chan->chan]); chan->flags |= DMA_CONFIGURED; + return 0; } static void sh_dmac_enable_dma(struct dma_channel *chan) @@ -262,17 +255,11 @@ static int __init sh_dmac_init(void) int i; #ifdef CONFIG_CPU_SH4 - make_ipr_irq(dmae_ipr_map, ARRAY_SIZE(dmae_ipr_map)); i = request_irq(DMAE_IRQ, dma_err, IRQF_DISABLED, "DMAC Address Error", 0); if (unlikely(i < 0)) return i; #endif - i = info->nr_channels; - if (i > ARRAY_SIZE(dmte_ipr_map)) - i = ARRAY_SIZE(dmte_ipr_map); - make_ipr_irq(dmte_ipr_map, i); - /* * Initialize DMAOR, and clean up any error flags that may have * been set. diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index cbac276..aa26245 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -101,7 +101,7 @@ static struct ipr_data sh7750_ipr_map[] = { { 35, 2, 8, 7 }, /* DMAC DMTE1 */ { 36, 2, 8, 7 }, /* DMAC DMTE2 */ { 37, 2, 8, 7 }, /* DMAC DMTE3 */ - { 28, 2, 8, 7 }, /* DMAC DMAE */ + { 38, 2, 8, 7 }, /* DMAC DMAE */ }; static struct ipr_data sh7751_ipr_map[] = { diff --git a/include/asm-sh/cpu-sh4/dma.h b/include/asm-sh/cpu-sh4/dma.h index 3e4b3e6..c135e9c 100644 --- a/include/asm-sh/cpu-sh4/dma.h +++ b/include/asm-sh/cpu-sh4/dma.h @@ -3,6 +3,17 @@ #define DMAOR_INIT ( 0x8000 | DMAOR_DME ) +/* SH7751/7760/7780 DMA IRQ sources */ +#define DMTE0_IRQ 34 +#define DMTE1_IRQ 35 +#define DMTE2_IRQ 36 +#define DMTE3_IRQ 37 +#define DMTE4_IRQ 44 +#define DMTE5_IRQ 45 +#define DMTE6_IRQ 46 +#define DMTE7_IRQ 47 +#define DMAE_IRQ 38 + #ifdef CONFIG_CPU_SH4A #define SH_DMAC_BASE 0xfc808020 -- cgit v0.10.2 From dbbfa2da27fbf353caa8934768afbbf8d5e73d9b Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Wed, 7 Feb 2007 13:54:39 +0900 Subject: sh: Fixup SHMIN INTC register definitions. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt diff --git a/arch/sh/boards/shmin/setup.c b/arch/sh/boards/shmin/setup.c index bed9ca6..4a9df4a 100644 --- a/arch/sh/boards/shmin/setup.c +++ b/arch/sh/boards/shmin/setup.c @@ -13,14 +13,14 @@ #include #define PFC_PHCR 0xa400010eUL -#define INTC_ICR1 0xffd00000UL +#define INTC_ICR1 0xa4000010UL #define INTC_IPRC 0xa4000016UL static struct ipr_data shmin_ipr_map[] = { - { .irq=32, .addr=INTC_IPRC, .shift= 0, .priority=0 }, - { .irq=33, .addr=INTC_IPRC, .shift= 4, .priority=0 }, - { .irq=34, .addr=INTC_IPRC, .shift= 8, .priority=8 }, - { .irq=35, .addr=INTC_IPRC, .shift=12, .priority=0 }, + { .irq=32, .addr=INTC_IPRC, .shift= 0, .priority=0 }, + { .irq=33, .addr=INTC_IPRC, .shift= 4, .priority=0 }, + { .irq=34, .addr=INTC_IPRC, .shift= 8, .priority=8 }, + { .irq=35, .addr=INTC_IPRC, .shift=12, .priority=0 }, }; static void __init init_shmin_irq(void) -- cgit v0.10.2 From 506b85f4114b912d2e91fab8da9849289e43857f Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 7 Feb 2007 13:56:44 +0900 Subject: sh: add SH_CLK_MD Kconfig default. This option needs a default - otherwise `make allmodconfig' gets stuck in an infinite loop. Signed-off-by: Andrew Morton Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 04cbc88..d18310a 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -481,6 +481,7 @@ config SH_PCLK_FREQ config SH_CLK_MD int "CPU Mode Pin Setting" + default 0 depends on CPU_SUBTYPE_SH7619 || CPU_SUBTYPE_SH7206 help MD2 - MD0 pin setting. -- cgit v0.10.2 From aec5e0e1c179fac4bbca4007a3f0d3107275a73c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 25 Dec 2006 09:51:47 +0900 Subject: sh: Use a per-cpu ASID cache. Previously this was implemented using a global cache, cache this per-CPU instead and bump up the number of context IDs to match NR_CPUS. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c index 4812176..6c3c768 100644 --- a/arch/sh/kernel/cpu/init.c +++ b/arch/sh/kernel/cpu/init.c @@ -3,7 +3,7 @@ * * CPU init code * - * Copyright (C) 2002, 2003 Paul Mundt + * Copyright (C) 2002 - 2006 Paul Mundt * Copyright (C) 2003 Richard Curnow * * This file is subject to the terms and conditions of the GNU General Public @@ -12,6 +12,8 @@ */ #include #include +#include +#include #include #include #include @@ -218,6 +220,12 @@ asmlinkage void __init sh_cpu_init(void) clear_used_math(); } + /* + * Initialize the per-CPU ASID cache very early, since the + * TLB flushing routines depend on this being setup. + */ + current_cpu_data.asid_cache = NO_CONTEXT; + #ifdef CONFIG_SH_DSP /* Probe for DSP */ dsp_init(); @@ -240,4 +248,3 @@ asmlinkage void __init sh_cpu_init(void) ubc_wakeup(); #endif } - diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c index cc8f306..0298f0f 100644 --- a/arch/sh/kernel/process.c +++ b/arch/sh/kernel/process.c @@ -1,42 +1,30 @@ -/* $Id: process.c,v 1.28 2004/05/05 16:54:23 lethal Exp $ +/* + * arch/sh/kernel/process.c * - * linux/arch/sh/kernel/process.c + * This file handles the architecture-dependent parts of process handling.. * * Copyright (C) 1995 Linus Torvalds * * SuperH version: Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima * Copyright (C) 2006 Lineo Solutions Inc. support SH4A UBC + * Copyright (C) 2002 - 2006 Paul Mundt */ - -/* - * This file handles the architecture-dependent parts of process handling.. - */ - #include -#include #include #include -#include -#include #include -#include #include #include - -#include #include #include -#include #include -static int hlt_counter=0; - +static int hlt_counter; int ubc_usercnt = 0; #define HARD_IDLE_TIMEOUT (HZ / 3) void (*pm_idle)(void); - void (*pm_power_off)(void); EXPORT_SYMBOL(pm_power_off); @@ -44,14 +32,12 @@ void disable_hlt(void) { hlt_counter++; } - EXPORT_SYMBOL(disable_hlt); void enable_hlt(void) { hlt_counter--; } - EXPORT_SYMBOL(enable_hlt); void default_idle(void) @@ -152,19 +138,21 @@ __asm__(".align 5\n" ".align 2\n\t" "1:.long do_exit"); +/* Don't use this in BL=1(cli). Or else, CPU resets! */ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) -{ /* Don't use this in BL=1(cli). Or else, CPU resets! */ +{ struct pt_regs regs; memset(®s, 0, sizeof(regs)); - regs.regs[4] = (unsigned long) arg; - regs.regs[5] = (unsigned long) fn; + regs.regs[4] = (unsigned long)arg; + regs.regs[5] = (unsigned long)fn; - regs.pc = (unsigned long) kernel_thread_helper; + regs.pc = (unsigned long)kernel_thread_helper; regs.sr = (1 << 30); /* Ok, create the new process.. */ - return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); + return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, + ®s, 0, NULL, NULL); } /* @@ -211,21 +199,20 @@ int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu) return fpvalid; } -/* +/* * Capture the user space registers if the task is not running (in user space) */ int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs) { struct pt_regs ptregs; - + ptregs = *task_pt_regs(tsk); elf_core_copy_regs(regs, &ptregs); return 1; } -int -dump_task_fpu (struct task_struct *tsk, elf_fpregset_t *fpu) +int dump_task_fpu(struct task_struct *tsk, elf_fpregset_t *fpu) { int fpvalid = 0; @@ -263,12 +250,14 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, childregs->regs[15] = usp; ti->addr_limit = USER_DS; } else { - childregs->regs[15] = (unsigned long)task_stack_page(p) + THREAD_SIZE; + childregs->regs[15] = (unsigned long)task_stack_page(p) + + THREAD_SIZE; ti->addr_limit = KERNEL_DS; } - if (clone_flags & CLONE_SETTLS) { + + if (clone_flags & CLONE_SETTLS) childregs->gbr = childregs->regs[0]; - } + childregs->regs[0] = 0; /* Set return value for child */ p->thread.sp = (unsigned long) childregs; @@ -280,8 +269,7 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, } /* Tracing by user break controller. */ -static void -ubc_set_tracing(int asid, unsigned long pc) +static void ubc_set_tracing(int asid, unsigned long pc) { #if defined(CONFIG_CPU_SH4A) unsigned long val; @@ -297,7 +285,7 @@ ubc_set_tracing(int asid, unsigned long pc) val = (UBC_CRR_RES | UBC_CRR_PCB | UBC_CRR_BIE); ctrl_outl(val, UBC_CRR0); - /* Read UBC register that we writed last. For chekking UBC Register changed */ + /* Read UBC register that we wrote last, for checking update */ val = ctrl_inl(UBC_CRR0); #else /* CONFIG_CPU_SH4A */ @@ -325,7 +313,8 @@ ubc_set_tracing(int asid, unsigned long pc) * switch_to(x,y) should switch tasks from x to y. * */ -struct task_struct *__switch_to(struct task_struct *prev, struct task_struct *next) +struct task_struct *__switch_to(struct task_struct *prev, + struct task_struct *next) { #if defined(CONFIG_SH_FPU) unlazy_fpu(prev, task_pt_regs(prev)); @@ -354,7 +343,7 @@ struct task_struct *__switch_to(struct task_struct *prev, struct task_struct *ne #ifdef CONFIG_MMU /* * Restore the kernel mode register - * k7 (r7_bank1) + * k7 (r7_bank1) */ asm volatile("ldc %0, r7_bank" : /* no output */ @@ -367,7 +356,7 @@ struct task_struct *__switch_to(struct task_struct *prev, struct task_struct *ne else if (next->thread.ubc_pc && next->mm) { int asid = 0; #ifdef CONFIG_MMU - asid |= next->mm->context.id & MMU_CONTEXT_ASID_MASK; + asid |= cpu_asid(smp_processor_id(), next->mm); #endif ubc_set_tracing(asid, next->thread.ubc_pc); } else { @@ -405,7 +394,8 @@ asmlinkage int sys_clone(unsigned long clone_flags, unsigned long newsp, if (!newsp) newsp = regs->regs[15]; return do_fork(clone_flags, newsp, regs, 0, - (int __user *)parent_tidptr, (int __user *)child_tidptr); + (int __user *)parent_tidptr, + (int __user *)child_tidptr); } /* diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index bf0c263..d172065 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -39,11 +39,6 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); pgd_t swapper_pg_dir[PTRS_PER_PGD]; -/* - * Cache of MMU context last used. - */ -unsigned long mmu_context_cache = NO_CONTEXT; - #ifdef CONFIG_MMU /* It'd be good if these lines were in the standard header file. */ #define START_PFN (NODE_DATA(0)->bdata->node_boot_start >> PAGE_SHIFT) diff --git a/arch/sh/mm/tlb-flush.c b/arch/sh/mm/tlb-flush.c index ef3e4d4..b829c17 100644 --- a/arch/sh/mm/tlb-flush.c +++ b/arch/sh/mm/tlb-flush.c @@ -16,12 +16,14 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long page) { - if (vma->vm_mm && vma->vm_mm->context.id != NO_CONTEXT) { + unsigned int cpu = smp_processor_id(); + + if (vma->vm_mm && cpu_context(cpu, vma->vm_mm) != NO_CONTEXT) { unsigned long flags; unsigned long asid; unsigned long saved_asid = MMU_NO_ASID; - asid = vma->vm_mm->context.id & MMU_CONTEXT_ASID_MASK; + asid = cpu_asid(cpu, vma->vm_mm); page &= PAGE_MASK; local_irq_save(flags); @@ -40,22 +42,23 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { struct mm_struct *mm = vma->vm_mm; + unsigned int cpu = smp_processor_id(); - if (mm->context.id != NO_CONTEXT) { + if (cpu_context(cpu, mm) != NO_CONTEXT) { unsigned long flags; int size; local_irq_save(flags); size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; if (size > (MMU_NTLB_ENTRIES/4)) { /* Too many TLB to flush */ - mm->context.id = NO_CONTEXT; + cpu_context(cpu, mm) = NO_CONTEXT; if (mm == current->mm) - activate_context(mm); + activate_context(mm, cpu); } else { unsigned long asid; unsigned long saved_asid = MMU_NO_ASID; - asid = mm->context.id & MMU_CONTEXT_ASID_MASK; + asid = cpu_asid(cpu, mm); start &= PAGE_MASK; end += (PAGE_SIZE - 1); end &= PAGE_MASK; @@ -76,6 +79,7 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, void flush_tlb_kernel_range(unsigned long start, unsigned long end) { + unsigned int cpu = smp_processor_id(); unsigned long flags; int size; @@ -87,7 +91,7 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end) unsigned long asid; unsigned long saved_asid = get_asid(); - asid = init_mm.context.id & MMU_CONTEXT_ASID_MASK; + asid = cpu_asid(cpu, &init_mm); start &= PAGE_MASK; end += (PAGE_SIZE - 1); end &= PAGE_MASK; @@ -103,15 +107,17 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end) void flush_tlb_mm(struct mm_struct *mm) { + unsigned int cpu = smp_processor_id(); + /* Invalidate all TLB of this process. */ /* Instead of invalidating each TLB, we get new MMU context. */ - if (mm->context.id != NO_CONTEXT) { + if (cpu_context(cpu, mm) != NO_CONTEXT) { unsigned long flags; local_irq_save(flags); - mm->context.id = NO_CONTEXT; + cpu_context(cpu, mm) = NO_CONTEXT; if (mm == current->mm) - activate_context(mm); + activate_context(mm, cpu); local_irq_restore(flags); } } diff --git a/include/asm-sh/mmu.h b/include/asm-sh/mmu.h index cf47df7..eb0358c 100644 --- a/include/asm-sh/mmu.h +++ b/include/asm-sh/mmu.h @@ -1,25 +1,19 @@ #ifndef __MMU_H #define __MMU_H -#if !defined(CONFIG_MMU) +/* Default "unsigned long" context */ +typedef unsigned long mm_context_id_t[NR_CPUS]; typedef struct { +#ifdef CONFIG_MMU + mm_context_id_t id; + void *vdso; +#else struct vm_list_struct *vmlist; unsigned long end_brk; +#endif } mm_context_t; -#else - -/* Default "unsigned long" context */ -typedef unsigned long mm_context_id_t; - -typedef struct { - mm_context_id_t id; - void *vdso; -} mm_context_t; - -#endif /* CONFIG_MMU */ - /* * Privileged Space Mapping Buffer (PMB) definitions */ diff --git a/include/asm-sh/mmu_context.h b/include/asm-sh/mmu_context.h index 46f04e2..3420244 100644 --- a/include/asm-sh/mmu_context.h +++ b/include/asm-sh/mmu_context.h @@ -1,6 +1,6 @@ /* * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2003 - 2006 Paul Mundt * * ASID handling idea taken from MIPS implementation. */ @@ -19,11 +19,6 @@ * (b) ASID (Address Space IDentifier) */ -/* - * Cache of MMU context last used. - */ -extern unsigned long mmu_context_cache; - #define MMU_CONTEXT_ASID_MASK 0x000000ff #define MMU_CONTEXT_VERSION_MASK 0xffffff00 #define MMU_CONTEXT_FIRST_VERSION 0x00000100 @@ -32,6 +27,11 @@ extern unsigned long mmu_context_cache; /* ASID is 8-bit value, so it can't be 0x100 */ #define MMU_NO_ASID 0x100 +#define cpu_context(cpu, mm) ((mm)->context.id[cpu]) +#define cpu_asid(cpu, mm) (cpu_context((cpu), (mm)) & \ + MMU_CONTEXT_ASID_MASK) +#define asid_cache(cpu) (cpu_data[cpu].asid_cache) + /* * Virtual Page Number mask */ @@ -41,18 +41,17 @@ extern unsigned long mmu_context_cache; /* * Get MMU context if needed. */ -static inline void get_mmu_context(struct mm_struct *mm) +static inline void get_mmu_context(struct mm_struct *mm, unsigned int cpu) { - unsigned long mc = mmu_context_cache; + unsigned long asid = asid_cache(cpu); /* Check if we have old version of context. */ - if (((mm->context.id ^ mc) & MMU_CONTEXT_VERSION_MASK) == 0) + if (((cpu_context(cpu, mm) ^ asid) & MMU_CONTEXT_VERSION_MASK) == 0) /* It's up to date, do nothing */ return; /* It's old, we need to get new context with new version. */ - mc = ++mmu_context_cache; - if (!(mc & MMU_CONTEXT_ASID_MASK)) { + if (!(++asid & MMU_CONTEXT_ASID_MASK)) { /* * We exhaust ASID of this version. * Flush all TLB and start new cycle. @@ -63,10 +62,11 @@ static inline void get_mmu_context(struct mm_struct *mm) * Fix version; Note that we avoid version #0 * to distingush NO_CONTEXT. */ - if (!mc) - mmu_context_cache = mc = MMU_CONTEXT_FIRST_VERSION; + if (!asid) + asid = MMU_CONTEXT_FIRST_VERSION; } - mm->context.id = mc; + + cpu_context(cpu, mm) = asid_cache(cpu) = asid; } /* @@ -74,9 +74,13 @@ static inline void get_mmu_context(struct mm_struct *mm) * instance. */ static inline int init_new_context(struct task_struct *tsk, - struct mm_struct *mm) + struct mm_struct *mm) { - mm->context.id = NO_CONTEXT; + int i; + + for (i = 0; i < num_online_cpus(); i++) + cpu_context(i, mm) = NO_CONTEXT; + return 0; } @@ -117,10 +121,10 @@ static inline unsigned long get_asid(void) * After we have set current->mm to a new value, this activates * the context for the new mm so we see the new mappings. */ -static inline void activate_context(struct mm_struct *mm) +static inline void activate_context(struct mm_struct *mm, unsigned int cpu) { - get_mmu_context(mm); - set_asid(mm->context.id & MMU_CONTEXT_ASID_MASK); + get_mmu_context(mm, cpu); + set_asid(cpu_asid(cpu, mm)); } /* MMU_TTB is used for optimizing the fault handling. */ @@ -138,10 +142,15 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) { + unsigned int cpu = smp_processor_id(); + if (likely(prev != next)) { + cpu_set(cpu, next->cpu_vm_mask); set_TTB(next->pgd); - activate_context(next); - } + activate_context(next, cpu); + } else + if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) + activate_context(next, cpu); } #define deactivate_mm(tsk,mm) do { } while (0) @@ -159,7 +168,7 @@ enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) #define destroy_context(mm) do { } while (0) #define set_asid(asid) do { } while (0) #define get_asid() (0) -#define activate_context(mm) do { } while (0) +#define activate_context(mm,cpu) do { } while (0) #define switch_mm(prev,next,tsk) do { } while (0) #define deactivate_mm(tsk,mm) do { } while (0) #define activate_mm(prev,next) do { } while (0) @@ -174,14 +183,16 @@ enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) */ static inline void enable_mmu(void) { + unsigned int cpu = smp_processor_id(); + /* Enable MMU */ ctrl_outl(MMU_CONTROL_INIT, MMUCR); ctrl_barrier(); - if (mmu_context_cache == NO_CONTEXT) - mmu_context_cache = MMU_CONTEXT_FIRST_VERSION; + if (asid_cache(cpu) == NO_CONTEXT) + asid_cache(cpu) = MMU_CONTEXT_FIRST_VERSION; - set_asid(mmu_context_cache & MMU_CONTEXT_ASID_MASK); + set_asid(asid_cache(cpu) & MMU_CONTEXT_ASID_MASK); } static inline void disable_mmu(void) diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index e29f2ab..da229aa 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -66,6 +66,7 @@ enum cpu_type { struct sh_cpuinfo { unsigned int type; unsigned long loops_per_jiffy; + unsigned long asid_cache; struct cache_info icache; /* Primary I-cache */ struct cache_info dcache; /* Primary D-cache */ -- cgit v0.10.2 From 11c1965687b0a472add948d4240dfe65a2fcb298 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 25 Dec 2006 10:19:56 +0900 Subject: sh: Fixup cpu_data references for the non-boot CPUs. There are a lot of bogus cpu_data-> references that only end up working for the boot CPU, convert these to current_cpu_data to fixup SMP. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c index 6c3c768..4b339a6 100644 --- a/arch/sh/kernel/cpu/init.c +++ b/arch/sh/kernel/cpu/init.c @@ -48,7 +48,7 @@ static void __init cache_init(void) { unsigned long ccr, flags; - if (cpu_data->type == CPU_SH_NONE) + if (current_cpu_data.type == CPU_SH_NONE) panic("Unknown CPU"); jump_to_P2(); @@ -68,7 +68,7 @@ static void __init cache_init(void) if (ccr & CCR_CACHE_ENABLE) { unsigned long ways, waysize, addrstart; - waysize = cpu_data->dcache.sets; + waysize = current_cpu_data.dcache.sets; #ifdef CCR_CACHE_ORA /* @@ -79,7 +79,7 @@ static void __init cache_init(void) waysize >>= 1; #endif - waysize <<= cpu_data->dcache.entry_shift; + waysize <<= current_cpu_data.dcache.entry_shift; #ifdef CCR_CACHE_EMODE /* If EMODE is not set, we only have 1 way to flush. */ @@ -87,7 +87,7 @@ static void __init cache_init(void) ways = 1; else #endif - ways = cpu_data->dcache.ways; + ways = current_cpu_data.dcache.ways; addrstart = CACHE_OC_ADDRESS_ARRAY; do { @@ -95,10 +95,10 @@ static void __init cache_init(void) for (addr = addrstart; addr < addrstart + waysize; - addr += cpu_data->dcache.linesz) + addr += current_cpu_data.dcache.linesz) ctrl_outl(0, addr); - addrstart += cpu_data->dcache.way_incr; + addrstart += current_cpu_data.dcache.way_incr; } while (--ways); } @@ -110,7 +110,7 @@ static void __init cache_init(void) #ifdef CCR_CACHE_EMODE /* Force EMODE if possible */ - if (cpu_data->dcache.ways > 1) + if (current_cpu_data.dcache.ways > 1) flags |= CCR_CACHE_EMODE; else flags &= ~CCR_CACHE_EMODE; @@ -127,10 +127,10 @@ static void __init cache_init(void) #ifdef CONFIG_SH_OCRAM /* Turn on OCRAM -- halve the OC */ flags |= CCR_CACHE_ORA; - cpu_data->dcache.sets >>= 1; + current_cpu_data.dcache.sets >>= 1; - cpu_data->dcache.way_size = cpu_data->dcache.sets * - cpu_data->dcache.linesz; + current_cpu_data.dcache.way_size = current_cpu_data.dcache.sets * + current_cpu_data.dcache.linesz; #endif ctrl_outl(flags, CCR); @@ -172,7 +172,7 @@ static void __init dsp_init(void) /* If the DSP bit is still set, this CPU has a DSP */ if (sr & SR_DSP) - cpu_data->flags |= CPU_HAS_DSP; + current_cpu_data.flags |= CPU_HAS_DSP; /* Now that we've determined the DSP status, clear the DSP bit. */ release_dsp(); @@ -204,18 +204,18 @@ asmlinkage void __init sh_cpu_init(void) cache_init(); shm_align_mask = max_t(unsigned long, - cpu_data->dcache.way_size - 1, + current_cpu_data.dcache.way_size - 1, PAGE_SIZE - 1); /* Disable the FPU */ if (fpu_disabled) { printk("FPU Disabled\n"); - cpu_data->flags &= ~CPU_HAS_FPU; + current_cpu_data.flags &= ~CPU_HAS_FPU; disable_fpu(); } /* FPU initialization */ - if ((cpu_data->flags & CPU_HAS_FPU)) { + if ((current_cpu_data.flags & CPU_HAS_FPU)) { clear_thread_flag(TIF_USEDFPU); clear_used_math(); } @@ -233,7 +233,7 @@ asmlinkage void __init sh_cpu_init(void) /* Disable the DSP */ if (dsp_disabled) { printk("DSP Disabled\n"); - cpu_data->flags &= ~CPU_HAS_DSP; + current_cpu_data.flags &= ~CPU_HAS_DSP; release_dsp(); } #endif diff --git a/arch/sh/kernel/cpu/sh2/probe.c b/arch/sh/kernel/cpu/sh2/probe.c index ba527d9..108e81b 100644 --- a/arch/sh/kernel/cpu/sh2/probe.c +++ b/arch/sh/kernel/cpu/sh2/probe.c @@ -18,27 +18,27 @@ int __init detect_cpu_and_cache_system(void) { #if defined(CONFIG_CPU_SUBTYPE_SH7604) - cpu_data->type = CPU_SH7604; - cpu_data->dcache.ways = 4; - cpu_data->dcache.way_incr = (1<<10); - cpu_data->dcache.sets = 64; - cpu_data->dcache.entry_shift = 4; - cpu_data->dcache.linesz = L1_CACHE_BYTES; - cpu_data->dcache.flags = 0; + current_cpu_data.type = CPU_SH7604; + current_cpu_data.dcache.ways = 4; + current_cpu_data.dcache.way_incr = (1<<10); + current_cpu_data.dcache.sets = 64; + current_cpu_data.dcache.entry_shift = 4; + current_cpu_data.dcache.linesz = L1_CACHE_BYTES; + current_cpu_data.dcache.flags = 0; #elif defined(CONFIG_CPU_SUBTYPE_SH7619) - cpu_data->type = CPU_SH7619; - cpu_data->dcache.ways = 4; - cpu_data->dcache.way_incr = (1<<12); - cpu_data->dcache.sets = 256; - cpu_data->dcache.entry_shift = 4; - cpu_data->dcache.linesz = L1_CACHE_BYTES; - cpu_data->dcache.flags = 0; + current_cpu_data.type = CPU_SH7619; + current_cpu_data.dcache.ways = 4; + current_cpu_data.dcache.way_incr = (1<<12); + current_cpu_data.dcache.sets = 256; + current_cpu_data.dcache.entry_shift = 4; + current_cpu_data.dcache.linesz = L1_CACHE_BYTES; + current_cpu_data.dcache.flags = 0; #endif /* * SH-2 doesn't have separate caches */ - cpu_data->dcache.flags |= SH_CACHE_COMBINED; - cpu_data->icache = cpu_data->dcache; + current_cpu_data.dcache.flags |= SH_CACHE_COMBINED; + current_cpu_data.icache = current_cpu_data.dcache; return 0; } diff --git a/arch/sh/kernel/cpu/sh2a/probe.c b/arch/sh/kernel/cpu/sh2a/probe.c index 87c6c05..426f6db 100644 --- a/arch/sh/kernel/cpu/sh2a/probe.c +++ b/arch/sh/kernel/cpu/sh2a/probe.c @@ -17,14 +17,14 @@ int __init detect_cpu_and_cache_system(void) { /* Just SH7206 for now .. */ - cpu_data->type = CPU_SH7206; + current_cpu_data.type = CPU_SH7206; - cpu_data->dcache.ways = 4; - cpu_data->dcache.way_incr = (1 << 11); - cpu_data->dcache.sets = 128; - cpu_data->dcache.entry_shift = 4; - cpu_data->dcache.linesz = L1_CACHE_BYTES; - cpu_data->dcache.flags = 0; + current_cpu_data.dcache.ways = 4; + current_cpu_data.dcache.way_incr = (1 << 11); + current_cpu_data.dcache.sets = 128; + current_cpu_data.dcache.entry_shift = 4; + current_cpu_data.dcache.linesz = L1_CACHE_BYTES; + current_cpu_data.dcache.flags = 0; /* * The icache is the same as the dcache as far as this setup is @@ -32,7 +32,7 @@ int __init detect_cpu_and_cache_system(void) * lacks the U bit that the dcache has, none of this has any bearing * on the cache info. */ - cpu_data->icache = cpu_data->dcache; + current_cpu_data.icache = current_cpu_data.dcache; return 0; } diff --git a/arch/sh/kernel/cpu/sh3/probe.c b/arch/sh/kernel/cpu/sh3/probe.c index e670988..821b0ab 100644 --- a/arch/sh/kernel/cpu/sh3/probe.c +++ b/arch/sh/kernel/cpu/sh3/probe.c @@ -50,41 +50,41 @@ int __init detect_cpu_and_cache_system(void) back_to_P1(); - cpu_data->dcache.ways = 4; - cpu_data->dcache.entry_shift = 4; - cpu_data->dcache.linesz = L1_CACHE_BYTES; - cpu_data->dcache.flags = 0; + current_cpu_data.dcache.ways = 4; + current_cpu_data.dcache.entry_shift = 4; + current_cpu_data.dcache.linesz = L1_CACHE_BYTES; + current_cpu_data.dcache.flags = 0; /* * 7709A/7729 has 16K cache (256-entry), while 7702 has only * 2K(direct) 7702 is not supported (yet) */ if (data0 == data1 && data2 == data3) { /* Shadow */ - cpu_data->dcache.way_incr = (1 << 11); - cpu_data->dcache.entry_mask = 0x7f0; - cpu_data->dcache.sets = 128; - cpu_data->type = CPU_SH7708; + current_cpu_data.dcache.way_incr = (1 << 11); + current_cpu_data.dcache.entry_mask = 0x7f0; + current_cpu_data.dcache.sets = 128; + current_cpu_data.type = CPU_SH7708; - cpu_data->flags |= CPU_HAS_MMU_PAGE_ASSOC; + current_cpu_data.flags |= CPU_HAS_MMU_PAGE_ASSOC; } else { /* 7709A or 7729 */ - cpu_data->dcache.way_incr = (1 << 12); - cpu_data->dcache.entry_mask = 0xff0; - cpu_data->dcache.sets = 256; - cpu_data->type = CPU_SH7729; + current_cpu_data.dcache.way_incr = (1 << 12); + current_cpu_data.dcache.entry_mask = 0xff0; + current_cpu_data.dcache.sets = 256; + current_cpu_data.type = CPU_SH7729; #if defined(CONFIG_CPU_SUBTYPE_SH7706) - cpu_data->type = CPU_SH7706; + current_cpu_data.type = CPU_SH7706; #endif #if defined(CONFIG_CPU_SUBTYPE_SH7710) - cpu_data->type = CPU_SH7710; + current_cpu_data.type = CPU_SH7710; #endif #if defined(CONFIG_CPU_SUBTYPE_SH7705) - cpu_data->type = CPU_SH7705; + current_cpu_data.type = CPU_SH7705; #if defined(CONFIG_SH7705_CACHE_32KB) - cpu_data->dcache.way_incr = (1 << 13); - cpu_data->dcache.entry_mask = 0x1ff0; - cpu_data->dcache.sets = 512; + current_cpu_data.dcache.way_incr = (1 << 13); + current_cpu_data.dcache.entry_mask = 0x1ff0; + current_cpu_data.dcache.sets = 512; ctrl_outl(CCR_CACHE_32KB, CCR3); #else ctrl_outl(CCR_CACHE_16KB, CCR3); @@ -95,8 +95,8 @@ int __init detect_cpu_and_cache_system(void) /* * SH-3 doesn't have separate caches */ - cpu_data->dcache.flags |= SH_CACHE_COMBINED; - cpu_data->icache = cpu_data->dcache; + current_cpu_data.dcache.flags |= SH_CACHE_COMBINED; + current_cpu_data.icache = current_cpu_data.dcache; return 0; } diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c index b26e2bc..9d28c88 100644 --- a/arch/sh/kernel/cpu/sh4/probe.c +++ b/arch/sh/kernel/cpu/sh4/probe.c @@ -10,11 +10,10 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ - #include +#include #include #include -#include int __init detect_cpu_and_cache_system(void) { @@ -36,20 +35,20 @@ int __init detect_cpu_and_cache_system(void) /* * Setup some sane SH-4 defaults for the icache */ - cpu_data->icache.way_incr = (1 << 13); - cpu_data->icache.entry_shift = 5; - cpu_data->icache.sets = 256; - cpu_data->icache.ways = 1; - cpu_data->icache.linesz = L1_CACHE_BYTES; + current_cpu_data.icache.way_incr = (1 << 13); + current_cpu_data.icache.entry_shift = 5; + current_cpu_data.icache.sets = 256; + current_cpu_data.icache.ways = 1; + current_cpu_data.icache.linesz = L1_CACHE_BYTES; /* * And again for the dcache .. */ - cpu_data->dcache.way_incr = (1 << 14); - cpu_data->dcache.entry_shift = 5; - cpu_data->dcache.sets = 512; - cpu_data->dcache.ways = 1; - cpu_data->dcache.linesz = L1_CACHE_BYTES; + current_cpu_data.dcache.way_incr = (1 << 14); + current_cpu_data.dcache.entry_shift = 5; + current_cpu_data.dcache.sets = 512; + current_cpu_data.dcache.ways = 1; + current_cpu_data.dcache.linesz = L1_CACHE_BYTES; /* * Setup some generic flags we can probe @@ -57,16 +56,16 @@ int __init detect_cpu_and_cache_system(void) */ if (((pvr >> 16) & 0xff) == 0x10) { if ((cvr & 0x02000000) == 0) - cpu_data->flags |= CPU_HAS_L2_CACHE; + current_cpu_data.flags |= CPU_HAS_L2_CACHE; if ((cvr & 0x10000000) == 0) - cpu_data->flags |= CPU_HAS_DSP; + current_cpu_data.flags |= CPU_HAS_DSP; - cpu_data->flags |= CPU_HAS_LLSC; + current_cpu_data.flags |= CPU_HAS_LLSC; } /* FPU detection works for everyone */ if ((cvr & 0x20000000) == 1) - cpu_data->flags |= CPU_HAS_FPU; + current_cpu_data.flags |= CPU_HAS_FPU; /* Mask off the upper chip ID */ pvr &= 0xffff; @@ -77,147 +76,151 @@ int __init detect_cpu_and_cache_system(void) */ switch (pvr) { case 0x205: - cpu_data->type = CPU_SH7750; - cpu_data->flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU | + current_cpu_data.type = CPU_SH7750; + current_cpu_data.flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU | CPU_HAS_PERF_COUNTER; break; case 0x206: - cpu_data->type = CPU_SH7750S; - cpu_data->flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU | + current_cpu_data.type = CPU_SH7750S; + current_cpu_data.flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU | CPU_HAS_PERF_COUNTER; break; case 0x1100: - cpu_data->type = CPU_SH7751; - cpu_data->flags |= CPU_HAS_FPU; + current_cpu_data.type = CPU_SH7751; + current_cpu_data.flags |= CPU_HAS_FPU; break; case 0x2000: - cpu_data->type = CPU_SH73180; - cpu_data->icache.ways = 4; - cpu_data->dcache.ways = 4; - cpu_data->flags |= CPU_HAS_LLSC; + current_cpu_data.type = CPU_SH73180; + current_cpu_data.icache.ways = 4; + current_cpu_data.dcache.ways = 4; + current_cpu_data.flags |= CPU_HAS_LLSC; break; case 0x2001: case 0x2004: - cpu_data->type = CPU_SH7770; - cpu_data->icache.ways = 4; - cpu_data->dcache.ways = 4; + current_cpu_data.type = CPU_SH7770; + current_cpu_data.icache.ways = 4; + current_cpu_data.dcache.ways = 4; - cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_LLSC; + current_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_LLSC; break; case 0x2006: case 0x200A: if (prr == 0x61) - cpu_data->type = CPU_SH7781; + current_cpu_data.type = CPU_SH7781; else - cpu_data->type = CPU_SH7780; + current_cpu_data.type = CPU_SH7780; - cpu_data->icache.ways = 4; - cpu_data->dcache.ways = 4; + current_cpu_data.icache.ways = 4; + current_cpu_data.dcache.ways = 4; - cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER | + current_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER | CPU_HAS_LLSC; break; case 0x3000: case 0x3003: case 0x3009: - cpu_data->type = CPU_SH7343; - cpu_data->icache.ways = 4; - cpu_data->dcache.ways = 4; - cpu_data->flags |= CPU_HAS_LLSC; + current_cpu_data.type = CPU_SH7343; + current_cpu_data.icache.ways = 4; + current_cpu_data.dcache.ways = 4; + current_cpu_data.flags |= CPU_HAS_LLSC; break; case 0x3008: if (prr == 0xa0) { - cpu_data->type = CPU_SH7722; - cpu_data->icache.ways = 4; - cpu_data->dcache.ways = 4; - cpu_data->flags |= CPU_HAS_LLSC; + current_cpu_data.type = CPU_SH7722; + current_cpu_data.icache.ways = 4; + current_cpu_data.dcache.ways = 4; + current_cpu_data.flags |= CPU_HAS_LLSC; } break; case 0x8000: - cpu_data->type = CPU_ST40RA; - cpu_data->flags |= CPU_HAS_FPU; + current_cpu_data.type = CPU_ST40RA; + current_cpu_data.flags |= CPU_HAS_FPU; break; case 0x8100: - cpu_data->type = CPU_ST40GX1; - cpu_data->flags |= CPU_HAS_FPU; + current_cpu_data.type = CPU_ST40GX1; + current_cpu_data.flags |= CPU_HAS_FPU; break; case 0x700: - cpu_data->type = CPU_SH4_501; - cpu_data->icache.ways = 2; - cpu_data->dcache.ways = 2; + current_cpu_data.type = CPU_SH4_501; + current_cpu_data.icache.ways = 2; + current_cpu_data.dcache.ways = 2; break; case 0x600: - cpu_data->type = CPU_SH4_202; - cpu_data->icache.ways = 2; - cpu_data->dcache.ways = 2; - cpu_data->flags |= CPU_HAS_FPU; + current_cpu_data.type = CPU_SH4_202; + current_cpu_data.icache.ways = 2; + current_cpu_data.dcache.ways = 2; + current_cpu_data.flags |= CPU_HAS_FPU; break; case 0x500 ... 0x501: switch (prr) { case 0x10: - cpu_data->type = CPU_SH7750R; + current_cpu_data.type = CPU_SH7750R; break; case 0x11: - cpu_data->type = CPU_SH7751R; + current_cpu_data.type = CPU_SH7751R; break; case 0x50 ... 0x5f: - cpu_data->type = CPU_SH7760; + current_cpu_data.type = CPU_SH7760; break; } - cpu_data->icache.ways = 2; - cpu_data->dcache.ways = 2; + current_cpu_data.icache.ways = 2; + current_cpu_data.dcache.ways = 2; - cpu_data->flags |= CPU_HAS_FPU; + current_cpu_data.flags |= CPU_HAS_FPU; break; default: - cpu_data->type = CPU_SH_NONE; + current_cpu_data.type = CPU_SH_NONE; break; } #ifdef CONFIG_SH_DIRECT_MAPPED - cpu_data->icache.ways = 1; - cpu_data->dcache.ways = 1; + current_cpu_data.icache.ways = 1; + current_cpu_data.dcache.ways = 1; +#endif + +#ifdef CONFIG_CPU_HAS_PTEA + current_cpu_data.flags |= CPU_HAS_PTEA; #endif /* * On anything that's not a direct-mapped cache, look to the CVR * for I/D-cache specifics. */ - if (cpu_data->icache.ways > 1) { + if (current_cpu_data.icache.ways > 1) { size = sizes[(cvr >> 20) & 0xf]; - cpu_data->icache.way_incr = (size >> 1); - cpu_data->icache.sets = (size >> 6); + current_cpu_data.icache.way_incr = (size >> 1); + current_cpu_data.icache.sets = (size >> 6); } /* Setup the rest of the I-cache info */ - cpu_data->icache.entry_mask = cpu_data->icache.way_incr - - cpu_data->icache.linesz; + current_cpu_data.icache.entry_mask = current_cpu_data.icache.way_incr - + current_cpu_data.icache.linesz; - cpu_data->icache.way_size = cpu_data->icache.sets * - cpu_data->icache.linesz; + current_cpu_data.icache.way_size = current_cpu_data.icache.sets * + current_cpu_data.icache.linesz; /* And the rest of the D-cache */ - if (cpu_data->dcache.ways > 1) { + if (current_cpu_data.dcache.ways > 1) { size = sizes[(cvr >> 16) & 0xf]; - cpu_data->dcache.way_incr = (size >> 1); - cpu_data->dcache.sets = (size >> 6); + current_cpu_data.dcache.way_incr = (size >> 1); + current_cpu_data.dcache.sets = (size >> 6); } - cpu_data->dcache.entry_mask = cpu_data->dcache.way_incr - - cpu_data->dcache.linesz; + current_cpu_data.dcache.entry_mask = current_cpu_data.dcache.way_incr - + current_cpu_data.dcache.linesz; - cpu_data->dcache.way_size = cpu_data->dcache.sets * - cpu_data->dcache.linesz; + current_cpu_data.dcache.way_size = current_cpu_data.dcache.sets * + current_cpu_data.dcache.linesz; /* * Setup the L2 cache desc * * SH-4A's have an optional PIPT L2. */ - if (cpu_data->flags & CPU_HAS_L2_CACHE) { + if (current_cpu_data.flags & CPU_HAS_L2_CACHE) { /* * Size calculation is much more sensible * than it is for the L1. @@ -228,16 +231,22 @@ int __init detect_cpu_and_cache_system(void) BUG_ON(!size); - cpu_data->scache.way_incr = (1 << 16); - cpu_data->scache.entry_shift = 5; - cpu_data->scache.ways = 4; - cpu_data->scache.linesz = L1_CACHE_BYTES; - cpu_data->scache.entry_mask = - (cpu_data->scache.way_incr - cpu_data->scache.linesz); - cpu_data->scache.sets = size / - (cpu_data->scache.linesz * cpu_data->scache.ways); - cpu_data->scache.way_size = - (cpu_data->scache.sets * cpu_data->scache.linesz); + current_cpu_data.scache.way_incr = (1 << 16); + current_cpu_data.scache.entry_shift = 5; + current_cpu_data.scache.ways = 4; + current_cpu_data.scache.linesz = L1_CACHE_BYTES; + + current_cpu_data.scache.entry_mask = + (current_cpu_data.scache.way_incr - + current_cpu_data.scache.linesz); + + current_cpu_data.scache.sets = size / + (current_cpu_data.scache.linesz * + current_cpu_data.scache.ways); + + current_cpu_data.scache.way_size = + (current_cpu_data.scache.sets * + current_cpu_data.scache.linesz); } return 0; diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c index 0298f0f..9d6a438 100644 --- a/arch/sh/kernel/process.c +++ b/arch/sh/kernel/process.c @@ -293,13 +293,14 @@ static void ubc_set_tracing(int asid, unsigned long pc) #ifdef CONFIG_MMU /* We don't have any ASID settings for the SH-2! */ - if (cpu_data->type != CPU_SH7604) + if (current_cpu_data.type != CPU_SH7604) ctrl_outb(asid, UBC_BASRA); #endif ctrl_outl(0, UBC_BAMRA); - if (cpu_data->type == CPU_SH7729 || cpu_data->type == CPU_SH7710) { + if (current_cpu_data.type == CPU_SH7729 || + current_cpu_data.type == CPU_SH7710) { ctrl_outw(BBR_INST | BBR_READ | BBR_CPU, UBC_BBRA); ctrl_outl(BRCR_PCBA | BRCR_PCTE, UBC_BRCR); } else { diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index d6b817a..98802ab 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -1,14 +1,11 @@ /* - * linux/arch/sh/kernel/setup.c + * arch/sh/kernel/setup.c * - * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2002, 2003 Paul Mundt - */ - -/* * This file handles the architecture-dependent parts of initialization + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2002 - 2006 Paul Mundt */ - #include #include #include @@ -395,9 +392,9 @@ static const char *cpu_name[] = { [CPU_SH_NONE] = "Unknown" }; -const char *get_cpu_subtype(void) +const char *get_cpu_subtype(struct sh_cpuinfo *c) { - return cpu_name[boot_cpu_data.type]; + return cpu_name[c->type]; } #ifdef CONFIG_PROC_FS @@ -407,19 +404,19 @@ static const char *cpu_flags[] = { "ptea", "llsc", "l2", NULL }; -static void show_cpuflags(struct seq_file *m) +static void show_cpuflags(struct seq_file *m, struct sh_cpuinfo *c) { unsigned long i; seq_printf(m, "cpu flags\t:"); - if (!cpu_data->flags) { + if (!c->flags) { seq_printf(m, " %s\n", cpu_flags[0]); return; } for (i = 0; cpu_flags[i]; i++) - if ((cpu_data->flags & (1 << i))) + if ((c->flags & (1 << i))) seq_printf(m, " %s", cpu_flags[i+1]); seq_printf(m, "\n"); @@ -441,16 +438,20 @@ static void show_cacheinfo(struct seq_file *m, const char *type, */ static int show_cpuinfo(struct seq_file *m, void *v) { - unsigned int cpu = smp_processor_id(); + struct sh_cpuinfo *c = v; + unsigned int cpu = c - cpu_data; + + if (!cpu_online(cpu)) + return 0; - if (!cpu && cpu_online(cpu)) + if (cpu == 0) seq_printf(m, "machine\t\t: %s\n", get_system_type()); seq_printf(m, "processor\t: %d\n", cpu); seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine); - seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype()); + seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype(c)); - show_cpuflags(m); + show_cpuflags(m, c); seq_printf(m, "cache type\t: "); @@ -459,22 +460,22 @@ static int show_cpuinfo(struct seq_file *m, void *v) * unified cache on the SH-2 and SH-3, as well as the harvard * style cache on the SH-4. */ - if (boot_cpu_data.icache.flags & SH_CACHE_COMBINED) { + if (c->icache.flags & SH_CACHE_COMBINED) { seq_printf(m, "unified\n"); - show_cacheinfo(m, "cache", boot_cpu_data.icache); + show_cacheinfo(m, "cache", c->icache); } else { seq_printf(m, "split (harvard)\n"); - show_cacheinfo(m, "icache", boot_cpu_data.icache); - show_cacheinfo(m, "dcache", boot_cpu_data.dcache); + show_cacheinfo(m, "icache", c->icache); + show_cacheinfo(m, "dcache", c->dcache); } /* Optional secondary cache */ - if (boot_cpu_data.flags & CPU_HAS_L2_CACHE) - show_cacheinfo(m, "scache", boot_cpu_data.scache); + if (c->flags & CPU_HAS_L2_CACHE) + show_cacheinfo(m, "scache", c->scache); seq_printf(m, "bogomips\t: %lu.%02lu\n", - boot_cpu_data.loops_per_jiffy/(500000/HZ), - (boot_cpu_data.loops_per_jiffy/(5000/HZ)) % 100); + c->loops_per_jiffy/(500000/HZ), + (c->loops_per_jiffy/(5000/HZ)) % 100); return show_clocks(m); } diff --git a/arch/sh/kernel/signal.c b/arch/sh/kernel/signal.c index 379c88b..32f10a0 100644 --- a/arch/sh/kernel/signal.c +++ b/arch/sh/kernel/signal.c @@ -127,7 +127,7 @@ static inline int restore_sigcontext_fpu(struct sigcontext __user *sc) { struct task_struct *tsk = current; - if (!(cpu_data->flags & CPU_HAS_FPU)) + if (!(current_cpu_data.flags & CPU_HAS_FPU)) return 0; set_used_math(); @@ -140,7 +140,7 @@ static inline int save_sigcontext_fpu(struct sigcontext __user *sc, { struct task_struct *tsk = current; - if (!(cpu_data->flags & CPU_HAS_FPU)) + if (!(current_cpu_data.flags & CPU_HAS_FPU)) return 0; if (!used_math()) { @@ -181,7 +181,7 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *r0_p #undef COPY #ifdef CONFIG_SH_FPU - if (cpu_data->flags & CPU_HAS_FPU) { + if (current_cpu_data.flags & CPU_HAS_FPU) { int owned_fp; struct task_struct *tsk = current; diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c index e91224f..e9f168f 100644 --- a/arch/sh/kernel/traps.c +++ b/arch/sh/kernel/traps.c @@ -641,7 +641,7 @@ int is_dsp_inst(struct pt_regs *regs) * Safe guard if DSP mode is already enabled or we're lacking * the DSP altogether. */ - if (!(cpu_data->flags & CPU_HAS_DSP) || (regs->sr & SR_DSP)) + if (!(current_cpu_data.flags & CPU_HAS_DSP) || (regs->sr & SR_DSP)) return 0; get_user(inst, ((unsigned short *) regs->pc)); diff --git a/arch/sh/mm/cache-debugfs.c b/arch/sh/mm/cache-debugfs.c index 909dcfa..de6d2c9 100644 --- a/arch/sh/mm/cache-debugfs.c +++ b/arch/sh/mm/cache-debugfs.c @@ -46,10 +46,10 @@ static int cache_seq_show(struct seq_file *file, void *iter) if (cache_type == CACHE_TYPE_DCACHE) { base = CACHE_OC_ADDRESS_ARRAY; - cache = &cpu_data->dcache; + cache = ¤t_cpu_data.dcache; } else { base = CACHE_IC_ADDRESS_ARRAY; - cache = &cpu_data->icache; + cache = ¤t_cpu_data.icache; } /* diff --git a/arch/sh/mm/cache-sh3.c b/arch/sh/mm/cache-sh3.c index 838731f..6d1dbec 100644 --- a/arch/sh/mm/cache-sh3.c +++ b/arch/sh/mm/cache-sh3.c @@ -44,11 +44,11 @@ void __flush_wback_region(void *start, int size) for (v = begin; v < end; v+=L1_CACHE_BYTES) { unsigned long addrstart = CACHE_OC_ADDRESS_ARRAY; - for (j = 0; j < cpu_data->dcache.ways; j++) { + for (j = 0; j < current_cpu_data.dcache.ways; j++) { unsigned long data, addr, p; p = __pa(v); - addr = addrstart | (v & cpu_data->dcache.entry_mask); + addr = addrstart | (v & current_cpu_data.dcache.entry_mask); local_irq_save(flags); data = ctrl_inl(addr); @@ -60,7 +60,7 @@ void __flush_wback_region(void *start, int size) break; } local_irq_restore(flags); - addrstart += cpu_data->dcache.way_incr; + addrstart += current_cpu_data.dcache.way_incr; } } } @@ -85,7 +85,7 @@ void __flush_purge_region(void *start, int size) data = (v & 0xfffffc00); /* _Virtual_ address, ~U, ~V */ addr = CACHE_OC_ADDRESS_ARRAY | - (v & cpu_data->dcache.entry_mask) | SH_CACHE_ASSOC; + (v & current_cpu_data.dcache.entry_mask) | SH_CACHE_ASSOC; ctrl_outl(data, addr); } } diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c index 72bb487..e0cd4b7 100644 --- a/arch/sh/mm/cache-sh4.c +++ b/arch/sh/mm/cache-sh4.c @@ -54,21 +54,21 @@ static void __init emit_cache_params(void) ctrl_inl(CCN_CVR), ctrl_inl(CCN_PRR)); printk("I-cache : n_ways=%d n_sets=%d way_incr=%d\n", - cpu_data->icache.ways, - cpu_data->icache.sets, - cpu_data->icache.way_incr); + current_cpu_data.icache.ways, + current_cpu_data.icache.sets, + current_cpu_data.icache.way_incr); printk("I-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n", - cpu_data->icache.entry_mask, - cpu_data->icache.alias_mask, - cpu_data->icache.n_aliases); + current_cpu_data.icache.entry_mask, + current_cpu_data.icache.alias_mask, + current_cpu_data.icache.n_aliases); printk("D-cache : n_ways=%d n_sets=%d way_incr=%d\n", - cpu_data->dcache.ways, - cpu_data->dcache.sets, - cpu_data->dcache.way_incr); + current_cpu_data.dcache.ways, + current_cpu_data.dcache.sets, + current_cpu_data.dcache.way_incr); printk("D-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n", - cpu_data->dcache.entry_mask, - cpu_data->dcache.alias_mask, - cpu_data->dcache.n_aliases); + current_cpu_data.dcache.entry_mask, + current_cpu_data.dcache.alias_mask, + current_cpu_data.dcache.n_aliases); if (!__flush_dcache_segment_fn) panic("unknown number of cache ways\n"); @@ -87,10 +87,10 @@ void __init p3_cache_init(void) { int i; - compute_alias(&cpu_data->icache); - compute_alias(&cpu_data->dcache); + compute_alias(¤t_cpu_data.icache); + compute_alias(¤t_cpu_data.dcache); - switch (cpu_data->dcache.ways) { + switch (current_cpu_data.dcache.ways) { case 1: __flush_dcache_segment_fn = __flush_dcache_segment_1way; break; @@ -110,7 +110,7 @@ void __init p3_cache_init(void) if (ioremap_page_range(P3SEG, P3SEG + (PAGE_SIZE * 4), 0, PAGE_KERNEL)) panic("%s failed.", __FUNCTION__); - for (i = 0; i < cpu_data->dcache.n_aliases; i++) + for (i = 0; i < current_cpu_data.dcache.n_aliases; i++) mutex_init(&p3map_mutex[i]); } @@ -200,13 +200,14 @@ void flush_cache_sigtramp(unsigned long addr) : /* no output */ : "m" (__m(v))); - index = CACHE_IC_ADDRESS_ARRAY | (v & cpu_data->icache.entry_mask); + index = CACHE_IC_ADDRESS_ARRAY | + (v & current_cpu_data.icache.entry_mask); local_irq_save(flags); jump_to_P2(); - for (i = 0; i < cpu_data->icache.ways; - i++, index += cpu_data->icache.way_incr) + for (i = 0; i < current_cpu_data.icache.ways; + i++, index += current_cpu_data.icache.way_incr) ctrl_outl(0, index); /* Clear out Valid-bit */ back_to_P1(); @@ -223,7 +224,7 @@ static inline void flush_cache_4096(unsigned long start, * All types of SH-4 require PC to be in P2 to operate on the I-cache. * Some types of SH-4 require PC to be in P2 to operate on the D-cache. */ - if ((cpu_data->flags & CPU_HAS_P2_FLUSH_BUG) || + if ((current_cpu_data.flags & CPU_HAS_P2_FLUSH_BUG) || (start < CACHE_OC_ADDRESS_ARRAY)) exec_offset = 0x20000000; @@ -255,7 +256,7 @@ void flush_dcache_page(struct page *page) int i, n; /* Loop all the D-cache */ - n = cpu_data->dcache.n_aliases; + n = current_cpu_data.dcache.n_aliases; for (i = 0; i < n; i++, addr += 4096) flush_cache_4096(addr, phys); } @@ -287,7 +288,7 @@ static inline void flush_icache_all(void) void flush_dcache_all(void) { - (*__flush_dcache_segment_fn)(0UL, cpu_data->dcache.way_size); + (*__flush_dcache_segment_fn)(0UL, current_cpu_data.dcache.way_size); wmb(); } @@ -301,8 +302,8 @@ static void __flush_cache_mm(struct mm_struct *mm, unsigned long start, unsigned long end) { unsigned long d = 0, p = start & PAGE_MASK; - unsigned long alias_mask = cpu_data->dcache.alias_mask; - unsigned long n_aliases = cpu_data->dcache.n_aliases; + unsigned long alias_mask = current_cpu_data.dcache.alias_mask; + unsigned long n_aliases = current_cpu_data.dcache.n_aliases; unsigned long select_bit; unsigned long all_aliases_mask; unsigned long addr_offset; @@ -389,7 +390,7 @@ void flush_cache_mm(struct mm_struct *mm) * If cache is only 4k-per-way, there are never any 'aliases'. Since * the cache is physically tagged, the data can just be left in there. */ - if (cpu_data->dcache.n_aliases == 0) + if (current_cpu_data.dcache.n_aliases == 0) return; /* @@ -426,7 +427,7 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long address, unsigned long phys = pfn << PAGE_SHIFT; unsigned int alias_mask; - alias_mask = cpu_data->dcache.alias_mask; + alias_mask = current_cpu_data.dcache.alias_mask; /* We only need to flush D-cache when we have alias */ if ((address^phys) & alias_mask) { @@ -440,7 +441,7 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long address, phys); } - alias_mask = cpu_data->icache.alias_mask; + alias_mask = current_cpu_data.icache.alias_mask; if (vma->vm_flags & VM_EXEC) { /* * Evict entries from the portion of the cache from which code @@ -472,7 +473,7 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, * If cache is only 4k-per-way, there are never any 'aliases'. Since * the cache is physically tagged, the data can just be left in there. */ - if (cpu_data->dcache.n_aliases == 0) + if (current_cpu_data.dcache.n_aliases == 0) return; /* @@ -533,7 +534,7 @@ static void __flush_cache_4096(unsigned long addr, unsigned long phys, unsigned long a, ea, p; unsigned long temp_pc; - dcache = &cpu_data->dcache; + dcache = ¤t_cpu_data.dcache; /* Write this way for better assembly. */ way_count = dcache->ways; way_incr = dcache->way_incr; @@ -608,7 +609,7 @@ static void __flush_dcache_segment_1way(unsigned long start, base_addr = ((base_addr >> 16) << 16); base_addr |= start; - dcache = &cpu_data->dcache; + dcache = ¤t_cpu_data.dcache; linesz = dcache->linesz; way_incr = dcache->way_incr; way_size = dcache->way_size; @@ -650,7 +651,7 @@ static void __flush_dcache_segment_2way(unsigned long start, base_addr = ((base_addr >> 16) << 16); base_addr |= start; - dcache = &cpu_data->dcache; + dcache = ¤t_cpu_data.dcache; linesz = dcache->linesz; way_incr = dcache->way_incr; way_size = dcache->way_size; @@ -709,7 +710,7 @@ static void __flush_dcache_segment_4way(unsigned long start, base_addr = ((base_addr >> 16) << 16); base_addr |= start; - dcache = &cpu_data->dcache; + dcache = ¤t_cpu_data.dcache; linesz = dcache->linesz; way_incr = dcache->way_incr; way_size = dcache->way_size; diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c index 2808b58..31f8deb 100644 --- a/arch/sh/mm/cache-sh7705.c +++ b/arch/sh/mm/cache-sh7705.c @@ -32,9 +32,9 @@ static inline void cache_wback_all(void) { unsigned long ways, waysize, addrstart; - ways = cpu_data->dcache.ways; - waysize = cpu_data->dcache.sets; - waysize <<= cpu_data->dcache.entry_shift; + ways = current_cpu_data.dcache.ways; + waysize = current_cpu_data.dcache.sets; + waysize <<= current_cpu_data.dcache.entry_shift; addrstart = CACHE_OC_ADDRESS_ARRAY; @@ -43,7 +43,7 @@ static inline void cache_wback_all(void) for (addr = addrstart; addr < addrstart + waysize; - addr += cpu_data->dcache.linesz) { + addr += current_cpu_data.dcache.linesz) { unsigned long data; int v = SH_CACHE_UPDATED | SH_CACHE_VALID; @@ -53,7 +53,7 @@ static inline void cache_wback_all(void) ctrl_outl(data & ~v, addr); } - addrstart += cpu_data->dcache.way_incr; + addrstart += current_cpu_data.dcache.way_incr; } while (--ways); } @@ -93,9 +93,9 @@ static void __flush_dcache_page(unsigned long phys) local_irq_save(flags); jump_to_P2(); - ways = cpu_data->dcache.ways; - waysize = cpu_data->dcache.sets; - waysize <<= cpu_data->dcache.entry_shift; + ways = current_cpu_data.dcache.ways; + waysize = current_cpu_data.dcache.sets; + waysize <<= current_cpu_data.dcache.entry_shift; addrstart = CACHE_OC_ADDRESS_ARRAY; @@ -104,7 +104,7 @@ static void __flush_dcache_page(unsigned long phys) for (addr = addrstart; addr < addrstart + waysize; - addr += cpu_data->dcache.linesz) { + addr += current_cpu_data.dcache.linesz) { unsigned long data; data = ctrl_inl(addr) & (0x1ffffC00 | SH_CACHE_VALID); @@ -114,7 +114,7 @@ static void __flush_dcache_page(unsigned long phys) } } - addrstart += cpu_data->dcache.way_incr; + addrstart += current_cpu_data.dcache.way_incr; } while (--ways); back_to_P1(); diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c index cfc3235..b529d80 100644 --- a/arch/sh/mm/pg-sh4.c +++ b/arch/sh/mm/pg-sh4.c @@ -13,7 +13,7 @@ extern struct mutex p3map_mutex[]; -#define CACHE_ALIAS (cpu_data->dcache.alias_mask) +#define CACHE_ALIAS (current_cpu_data.dcache.alias_mask) /* * clear_user_page diff --git a/arch/sh/mm/pg-sh7705.c b/arch/sh/mm/pg-sh7705.c index b052d0f..887ab9d 100644 --- a/arch/sh/mm/pg-sh7705.c +++ b/arch/sh/mm/pg-sh7705.c @@ -43,13 +43,13 @@ static inline void __flush_purge_virtual_region(void *p1, void *virt, int size) p = __pa(p1_begin); - ways = cpu_data->dcache.ways; + ways = current_cpu_data.dcache.ways; addr = CACHE_OC_ADDRESS_ARRAY; do { unsigned long data; - addr |= (v & cpu_data->dcache.entry_mask); + addr |= (v & current_cpu_data.dcache.entry_mask); data = ctrl_inl(addr); if ((data & CACHE_PHYSADDR_MASK) == @@ -58,7 +58,7 @@ static inline void __flush_purge_virtual_region(void *p1, void *virt, int size) ctrl_outl(data, addr); } - addr += cpu_data->dcache.way_incr; + addr += current_cpu_data.dcache.way_incr; } while (--ways); p1_begin += L1_CACHE_BYTES; diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c index 1662706..598c998 100644 --- a/arch/sh/mm/tlb-sh3.c +++ b/arch/sh/mm/tlb-sh3.c @@ -26,7 +26,7 @@ void __flush_tlb_page(unsigned long asid, unsigned long page) addr = MMU_TLB_ADDRESS_ARRAY | (page & 0x1F000); data = (page & 0xfffe0000) | asid; /* VALID bit is off */ - if ((cpu_data->flags & CPU_HAS_MMU_PAGE_ASSOC)) { + if ((current_cpu_data.flags & CPU_HAS_MMU_PAGE_ASSOC)) { addr |= MMU_PAGE_ASSOC_BIT; ways = 1; /* we already know the way .. */ } diff --git a/arch/sh/oprofile/op_model_sh7750.c b/arch/sh/oprofile/op_model_sh7750.c index 0104e44..ebee7e2 100644 --- a/arch/sh/oprofile/op_model_sh7750.c +++ b/arch/sh/oprofile/op_model_sh7750.c @@ -259,7 +259,7 @@ static struct oprofile_operations sh7750_perf_counter_ops = { int __init oprofile_arch_init(struct oprofile_operations **ops) { - if (!(cpu_data->flags & CPU_HAS_PERF_COUNTER)) + if (!(current_cpu_data.flags & CPU_HAS_PERF_COUNTER)) return -ENODEV; sh7750_perf_counter_ops.cpu_type = (char *)get_cpu_subtype(); diff --git a/include/asm-sh/bugs.h b/include/asm-sh/bugs.h index a294997..5a117ec 100644 --- a/include/asm-sh/bugs.h +++ b/include/asm-sh/bugs.h @@ -19,9 +19,9 @@ static void __init check_bugs(void) extern unsigned long loops_per_jiffy; char *p = &init_utsname()->machine[2]; /* "sh" */ - cpu_data->loops_per_jiffy = loops_per_jiffy; + current_cpu_data.loops_per_jiffy = loops_per_jiffy; - switch (cpu_data->type) { + switch (current_cpu_data.type) { case CPU_SH7604 ... CPU_SH7619: *p++ = '2'; break; @@ -54,7 +54,7 @@ static void __init check_bugs(void) break; } - printk("CPU: %s\n", get_cpu_subtype()); + printk("CPU: %s\n", get_cpu_subtype(¤t_cpu_data)); #ifndef __LITTLE_ENDIAN__ /* 'eb' means 'Endian Big' */ diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index da229aa..3e46a7a 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -27,8 +27,6 @@ #define CCN_CVR 0xff000040 #define CCN_PRR 0xff000044 -const char *get_cpu_subtype(void); - /* * CPU type and hardware bug flags. Kept separately for each CPU. * @@ -289,5 +287,8 @@ extern int vsyscall_init(void); #define vsyscall_init() do { } while (0) #endif +/* arch/sh/kernel/setup.c */ +const char *get_cpu_subtype(struct sh_cpuinfo *c); + #endif /* __KERNEL__ */ #endif /* __ASM_SH_PROCESSOR_H */ diff --git a/include/asm-sh/ubc.h b/include/asm-sh/ubc.h index 694f51f..ae9bbde 100644 --- a/include/asm-sh/ubc.h +++ b/include/asm-sh/ubc.h @@ -17,7 +17,7 @@ /* User Break Controller */ #if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \ defined(CONFIG_CPU_SUBTYPE_SH7300) -#define UBC_TYPE_SH7729 (cpu_data->type == CPU_SH7729) +#define UBC_TYPE_SH7729 (current_cpu_data.type == CPU_SH7729) #else #define UBC_TYPE_SH7729 0 #endif -- cgit v0.10.2 From ea9af69481730e3d712104dfd549ba6c8ddd29f1 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 25 Dec 2006 19:28:54 +0900 Subject: sh: Local TLB flushing variants for SMP prep. Rename the existing flush routines to local_ variants for use by the IPI-backed global flush routines on SMP. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/sh_ksyms.c b/arch/sh/kernel/sh_ksyms.c index e610623..fe1b276 100644 --- a/arch/sh/kernel/sh_ksyms.c +++ b/arch/sh/kernel/sh_ksyms.c @@ -105,7 +105,6 @@ EXPORT_SYMBOL(__flush_purge_region); EXPORT_SYMBOL(clear_user_page); #endif -EXPORT_SYMBOL(flush_tlb_page); EXPORT_SYMBOL(__down_trylock); #ifdef CONFIG_SMP diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index d172065..ae957a9 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -106,7 +106,7 @@ static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot) set_pte(pte, pfn_pte(phys >> PAGE_SHIFT, prot)); - __flush_tlb_page(get_asid(), addr); + flush_tlb_one(get_asid(), addr); } /* diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c index b529d80..969efece 100644 --- a/arch/sh/mm/pg-sh4.c +++ b/arch/sh/mm/pg-sh4.c @@ -39,7 +39,7 @@ void clear_user_page(void *to, unsigned long address, struct page *page) mutex_lock(&p3map_mutex[(address & CACHE_ALIAS)>>12]); set_pte(pte, entry); local_irq_save(flags); - __flush_tlb_page(get_asid(), p3_addr); + flush_tlb_one(get_asid(), p3_addr); local_irq_restore(flags); update_mmu_cache(NULL, p3_addr, entry); __clear_user_page((void *)p3_addr, to); @@ -74,7 +74,7 @@ void copy_user_page(void *to, void *from, unsigned long address, mutex_lock(&p3map_mutex[(address & CACHE_ALIAS)>>12]); set_pte(pte, entry); local_irq_save(flags); - __flush_tlb_page(get_asid(), p3_addr); + flush_tlb_one(get_asid(), p3_addr); local_irq_restore(flags); update_mmu_cache(NULL, p3_addr, entry); __copy_user_page((void *)p3_addr, from, to); diff --git a/arch/sh/mm/tlb-flush.c b/arch/sh/mm/tlb-flush.c index b829c17..dcaf98e 100644 --- a/arch/sh/mm/tlb-flush.c +++ b/arch/sh/mm/tlb-flush.c @@ -14,7 +14,7 @@ #include #include -void flush_tlb_page(struct vm_area_struct *vma, unsigned long page) +void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) { unsigned int cpu = smp_processor_id(); @@ -31,15 +31,15 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long page) saved_asid = get_asid(); set_asid(asid); } - __flush_tlb_page(asid, page); + flush_tlb_one(asid, page); if (saved_asid != MMU_NO_ASID) set_asid(saved_asid); local_irq_restore(flags); } } -void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, - unsigned long end) +void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end) { struct mm_struct *mm = vma->vm_mm; unsigned int cpu = smp_processor_id(); @@ -67,7 +67,7 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, set_asid(asid); } while (start < end) { - __flush_tlb_page(asid, start); + flush_tlb_one(asid, start); start += PAGE_SIZE; } if (saved_asid != MMU_NO_ASID) @@ -77,7 +77,7 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, } } -void flush_tlb_kernel_range(unsigned long start, unsigned long end) +void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) { unsigned int cpu = smp_processor_id(); unsigned long flags; @@ -86,7 +86,7 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end) local_irq_save(flags); size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; if (size > (MMU_NTLB_ENTRIES/4)) { /* Too many TLB to flush */ - flush_tlb_all(); + local_flush_tlb_all(); } else { unsigned long asid; unsigned long saved_asid = get_asid(); @@ -97,7 +97,7 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end) end &= PAGE_MASK; set_asid(asid); while (start < end) { - __flush_tlb_page(asid, start); + flush_tlb_one(asid, start); start += PAGE_SIZE; } set_asid(saved_asid); @@ -105,7 +105,7 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end) local_irq_restore(flags); } -void flush_tlb_mm(struct mm_struct *mm) +void local_flush_tlb_mm(struct mm_struct *mm) { unsigned int cpu = smp_processor_id(); @@ -122,7 +122,7 @@ void flush_tlb_mm(struct mm_struct *mm) } } -void flush_tlb_all(void) +void local_flush_tlb_all(void) { unsigned long flags, status; diff --git a/arch/sh/mm/tlb-nommu.c b/arch/sh/mm/tlb-nommu.c index e55cfea..1ccca7c 100644 --- a/arch/sh/mm/tlb-nommu.c +++ b/arch/sh/mm/tlb-nommu.c @@ -13,39 +13,33 @@ /* * Nothing too terribly exciting here .. */ - -void flush_tlb(void) -{ - BUG(); -} - -void flush_tlb_all(void) +void local_flush_tlb_all(void) { BUG(); } -void flush_tlb_mm(struct mm_struct *mm) +void local_flush_tlb_mm(struct mm_struct *mm) { BUG(); } -void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, +void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { BUG(); } -void flush_tlb_page(struct vm_area_struct *vma, unsigned long page) +void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) { BUG(); } -void __flush_tlb_page(unsigned long asid, unsigned long page) +void local_flush_tlb_one(unsigned long asid, unsigned long page) { BUG(); } -void flush_tlb_kernel_range(unsigned long start, unsigned long end) +void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) { BUG(); } @@ -55,4 +49,3 @@ void update_mmu_cache(struct vm_area_struct * vma, { BUG(); } - diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c index 598c998..e5e76eb 100644 --- a/arch/sh/mm/tlb-sh3.c +++ b/arch/sh/mm/tlb-sh3.c @@ -12,7 +12,7 @@ #include #include -void __flush_tlb_page(unsigned long asid, unsigned long page) +void local_flush_tlb_one(unsigned long asid, unsigned long page) { unsigned long addr, data; int i, ways = MMU_NTLB_WAYS; diff --git a/arch/sh/mm/tlb-sh4.c b/arch/sh/mm/tlb-sh4.c index 758d8de..221e709 100644 --- a/arch/sh/mm/tlb-sh4.c +++ b/arch/sh/mm/tlb-sh4.c @@ -12,7 +12,7 @@ #include #include -void __flush_tlb_page(unsigned long asid, unsigned long page) +void local_flush_tlb_one(unsigned long asid, unsigned long page) { unsigned long addr, data; diff --git a/include/asm-sh/tlbflush.h b/include/asm-sh/tlbflush.h index 28c073b..455fb8d 100644 --- a/include/asm-sh/tlbflush.h +++ b/include/asm-sh/tlbflush.h @@ -4,7 +4,6 @@ /* * TLB flushing: * - * - flush_tlb() flushes the current mm struct TLBs * - flush_tlb_all() flushes all processes TLBs * - flush_tlb_mm(mm) flushes the specified mm context TLB's * - flush_tlb_page(vma, vmaddr) flushes one page @@ -12,20 +11,45 @@ * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages * - flush_tlb_pgtables(mm, start, end) flushes a range of page tables */ +extern void local_flush_tlb_all(void); +extern void local_flush_tlb_mm(struct mm_struct *mm); +extern void local_flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, + unsigned long end); +extern void local_flush_tlb_page(struct vm_area_struct *vma, + unsigned long page); +extern void local_flush_tlb_kernel_range(unsigned long start, + unsigned long end); +extern void local_flush_tlb_one(unsigned long asid, unsigned long page); + +#ifdef CONFIG_SMP -extern void flush_tlb(void); extern void flush_tlb_all(void); extern void flush_tlb_mm(struct mm_struct *mm); extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page); -extern void __flush_tlb_page(unsigned long asid, unsigned long page); +extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); +extern void flush_tlb_one(unsigned long asid, unsigned long page); + +#else + +#define flush_tlb_all() local_flush_tlb_all() +#define flush_tlb_mm(mm) local_flush_tlb_mm(mm) +#define flush_tlb_page(vma, page) local_flush_tlb_page(vma, page) +#define flush_tlb_one(asid, page) local_flush_tlb_one(asid, page) + +#define flush_tlb_range(vma, start, end) \ + local_flush_tlb_range(vma, start, end) + +#define flush_tlb_kernel_range(start, end) \ + local_flush_tlb_kernel_range(start, end) + +#endif /* CONFIG_SMP */ static inline void flush_tlb_pgtables(struct mm_struct *mm, unsigned long start, unsigned long end) -{ /* Nothing to do */ +{ + /* Nothing to do */ } - -extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); - #endif /* __ASM_SH_TLBFLUSH_H */ -- cgit v0.10.2 From 0072032d7babc4347556c1863919f3c532d9cf5b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 25 Dec 2006 19:37:56 +0900 Subject: sh: Switch to local TLB flush variants in additional callsites. Convert some of the global flush users over to using the local variants that don't need to use the global routines. Signed-off-by: Paul Mundt diff --git a/arch/sh/mm/tlb-flush.c b/arch/sh/mm/tlb-flush.c index dcaf98e..d2f7b4a 100644 --- a/arch/sh/mm/tlb-flush.c +++ b/arch/sh/mm/tlb-flush.c @@ -31,7 +31,7 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) saved_asid = get_asid(); set_asid(asid); } - flush_tlb_one(asid, page); + local_flush_tlb_one(asid, page); if (saved_asid != MMU_NO_ASID) set_asid(saved_asid); local_irq_restore(flags); @@ -67,7 +67,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, set_asid(asid); } while (start < end) { - flush_tlb_one(asid, start); + local_flush_tlb_one(asid, start); start += PAGE_SIZE; } if (saved_asid != MMU_NO_ASID) @@ -97,7 +97,7 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) end &= PAGE_MASK; set_asid(asid); while (start < end) { - flush_tlb_one(asid, start); + local_flush_tlb_one(asid, start); start += PAGE_SIZE; } set_asid(saved_asid); -- cgit v0.10.2 From 5904539b7f21ae97f16278ea4bfb81fd19749e1a Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 7 Feb 2007 18:35:39 +0900 Subject: sh: dcache write-back for R7780RP PIO. Signed-off-by: Paul Mundt diff --git a/arch/sh/boards/renesas/r7780rp/io.c b/arch/sh/boards/renesas/r7780rp/io.c index 311cccc..369cbf1 100644 --- a/arch/sh/boards/renesas/r7780rp/io.c +++ b/arch/sh/boards/renesas/r7780rp/io.c @@ -214,6 +214,8 @@ void r7780rp_insw(unsigned long port, void *dst, unsigned long count) while (count--) *buf++ = *p; + + flush_dcache_all(); } void r7780rp_insl(unsigned long port, void *dst, unsigned long count) @@ -271,6 +273,8 @@ void r7780rp_outsw(unsigned long port, const void *src, unsigned long count) while (count--) *p = *buf++; + + flush_dcache_all(); } void r7780rp_outsl(unsigned long port, const void *src, unsigned long count) -- cgit v0.10.2 From b37814352d2c4b83e0636e57f997c3a79d33be05 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 7 Feb 2007 19:11:35 +0900 Subject: sh: Fix syscall numbering breakage. We accidentally broke the inotify syscalls, fix those up again. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/syscalls.S b/arch/sh/kernel/syscalls.S index ca81976..38fc8cd 100644 --- a/arch/sh/kernel/syscalls.S +++ b/arch/sh/kernel/syscalls.S @@ -319,15 +319,15 @@ ENTRY(sys_call_table) .long sys_mq_getsetattr .long sys_kexec_load .long sys_waitid - .long sys_ni_syscall /* 285 */ - .long sys_add_key + .long sys_add_key /* 285 */ .long sys_request_key .long sys_keyctl .long sys_ioprio_set - .long sys_ioprio_get /* 290 */ - .long sys_inotify_init + .long sys_ioprio_get + .long sys_inotify_init /* 290 */ .long sys_inotify_add_watch .long sys_inotify_rm_watch + .long sys_ni_syscall .long sys_migrate_pages .long sys_openat /* 295 */ .long sys_mkdirat diff --git a/include/asm-sh/unistd.h b/include/asm-sh/unistd.h index 7d0cd2b..17f527b 100644 --- a/include/asm-sh/unistd.h +++ b/include/asm-sh/unistd.h @@ -292,15 +292,15 @@ #define __NR_mq_getsetattr (__NR_mq_open+5) #define __NR_kexec_load 283 #define __NR_waitid 284 -/* #define __NR_sys_setaltroot 285 */ -#define __NR_add_key 286 -#define __NR_request_key 287 -#define __NR_keyctl 288 -#define __NR_ioprio_set 289 -#define __NR_ioprio_get 290 -#define __NR_inotify_init 291 -#define __NR_inotify_add_watch 292 -#define __NR_inotify_rm_watch 293 +#define __NR_add_key 285 +#define __NR_request_key 286 +#define __NR_keyctl 287 +#define __NR_ioprio_set 288 +#define __NR_ioprio_get 289 +#define __NR_inotify_init 290 +#define __NR_inotify_add_watch 291 +#define __NR_inotify_rm_watch 292 +/* 293 is unused */ #define __NR_migrate_pages 294 #define __NR_openat 295 #define __NR_mkdirat 296 -- cgit v0.10.2 From a5ba7d545364b85c3a97f65d328be55ca933a9c7 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 7 Feb 2007 19:58:07 +0900 Subject: sh: Move __KERNEL__ up in asm/page.h. This was breaking the uClibc build, which triggered the bogus page size error. Signed-off-by: Paul Mundt diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h index 380fd62..ac4b467 100644 --- a/include/asm-sh/page.h +++ b/include/asm-sh/page.h @@ -13,6 +13,8 @@ [ P4 control ] 0xE0000000 */ +#ifdef __KERNEL__ + /* PAGE_SHIFT determines the page size */ #if defined(CONFIG_PAGE_SIZE_4KB) # define PAGE_SHIFT 12 @@ -51,7 +53,6 @@ #define HUGETLB_PAGE_ORDER (HPAGE_SHIFT-PAGE_SHIFT) #endif -#ifdef __KERNEL__ #ifndef __ASSEMBLY__ extern void (*clear_page)(void *to); -- cgit v0.10.2 From f5df54dc2e1dce80eb7fb45f3f6d5ce096d911f3 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 7 Feb 2007 20:00:01 +0900 Subject: sh: Add cpu-features header to asm/Kbuild. This is used by the libc for parsing CPU capability flags passed via the ELF auxvt, needed for run-time selection of atomic opcodes amongst other things. Signed-off-by: Paul Mundt diff --git a/include/asm-sh/Kbuild b/include/asm-sh/Kbuild index c68e168..76a8ccf 100644 --- a/include/asm-sh/Kbuild +++ b/include/asm-sh/Kbuild @@ -1 +1,3 @@ include include/asm-generic/Kbuild.asm + +header-y += cpu-features.h -- cgit v0.10.2 From ca43ecbf6e5c7216152e5a388f2ecdd87e07a293 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 7 Feb 2007 21:27:50 +0900 Subject: sh: Kill dead/unused ISA code from __ioremap(). Signed-off-by: Paul Mundt diff --git a/arch/sh/mm/ioremap.c b/arch/sh/mm/ioremap.c index 90b494a..be03d74 100644 --- a/arch/sh/mm/ioremap.c +++ b/arch/sh/mm/ioremap.c @@ -45,12 +45,6 @@ void __iomem *__ioremap(unsigned long phys_addr, unsigned long size, return NULL; /* - * Don't remap the low PCI/ISA area, it's always mapped.. - */ - if (phys_addr >= 0xA0000 && last_addr < 0x100000) - return (void __iomem *)phys_to_virt(phys_addr); - - /* * If we're on an SH7751 or SH7780 PCI controller, PCI memory is * mapped at the end of the address space (typically 0xfd000000) * in a non-translatable area, so mapping through page tables for -- cgit v0.10.2 From fe8289175059a807094ba962828318910ea08a37 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 13 Feb 2007 11:09:15 +0900 Subject: sh: Missing flush_dcache_all() proto in cacheflush.h. Some boards need this, so provide a definition. Signed-off-by: Paul Mundt diff --git a/include/asm-sh/cpu-sh4/cacheflush.h b/include/asm-sh/cpu-sh4/cacheflush.h index f563c3b..b3746a9 100644 --- a/include/asm-sh/cpu-sh4/cacheflush.h +++ b/include/asm-sh/cpu-sh4/cacheflush.h @@ -17,6 +17,7 @@ * so we need them. */ void flush_cache_all(void); +void flush_dcache_all(void); void flush_cache_mm(struct mm_struct *mm); #define flush_cache_dup_mm(mm) flush_cache_mm(mm) void flush_cache_range(struct vm_area_struct *vma, unsigned long start, -- cgit v0.10.2 From c7666e72cff1a2793055486340ac5f5137494c08 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 13 Feb 2007 11:11:22 +0900 Subject: sh: define dma noncoherent API functions. sh was missing these, too. Signed-off-by: Paul Mundt diff --git a/include/asm-sh/dma-mapping.h b/include/asm-sh/dma-mapping.h index 8d0867b..d3bc781 100644 --- a/include/asm-sh/dma-mapping.h +++ b/include/asm-sh/dma-mapping.h @@ -53,6 +53,10 @@ static inline void dma_free_coherent(struct device *dev, size_t size, consistent_free(vaddr, size); } +#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) +#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) +#define dma_is_consistent(d, h) (1) + static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size, enum dma_data_direction dir) { -- cgit v0.10.2 From 8ce0a7df6e6117d8814e976d4b7ce6a6b2c9cf93 Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Mon, 12 Feb 2007 17:43:46 -0600 Subject: [POWERPC] 85xx: Don't write reserved values to MAS1[TSIZE] Some of the current tlbwe instructions early on in head_fsl_booke.S take advantage of unarchitected behavior that allows the writing of reserved values to the TSIZE field. This patch corrects that, as well as an error where an uninitialized (by linux) value was written into a MAS register and used for a tlbwe. Correct this for both arch/ppc and arch/powerpc. Signed-off-by: Becky Bruce Signed-off-by: Kumar Gala diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 66877bd..54f40d9 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -206,7 +206,8 @@ skpinv: addi r6,r6,1 /* Increment */ rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */ mtspr SPRN_MAS0,r7 tlbre - li r6,0 + mfspr r6,SPRN_MAS1 + rlwinm r6,r6,0,2,0 /* clear IPROT */ mtspr SPRN_MAS1,r6 tlbwe /* Invalidate TLB1 */ @@ -248,6 +249,8 @@ skpinv: addi r6,r6,1 /* Increment */ rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */ mtspr SPRN_MAS0,r7 tlbre + mfspr r8,SPRN_MAS1 + rlwinm r8,r8,0,2,0 /* clear IPROT */ mtspr SPRN_MAS1,r8 tlbwe /* Invalidate TLB1 */ diff --git a/arch/ppc/kernel/head_fsl_booke.S b/arch/ppc/kernel/head_fsl_booke.S index 66877bd..54f40d9 100644 --- a/arch/ppc/kernel/head_fsl_booke.S +++ b/arch/ppc/kernel/head_fsl_booke.S @@ -206,7 +206,8 @@ skpinv: addi r6,r6,1 /* Increment */ rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */ mtspr SPRN_MAS0,r7 tlbre - li r6,0 + mfspr r6,SPRN_MAS1 + rlwinm r6,r6,0,2,0 /* clear IPROT */ mtspr SPRN_MAS1,r6 tlbwe /* Invalidate TLB1 */ @@ -248,6 +249,8 @@ skpinv: addi r6,r6,1 /* Increment */ rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */ mtspr SPRN_MAS0,r7 tlbre + mfspr r8,SPRN_MAS1 + rlwinm r8,r8,0,2,0 /* clear IPROT */ mtspr SPRN_MAS1,r8 tlbwe /* Invalidate TLB1 */ -- cgit v0.10.2 From 1f1fec94589ed0b14c749eb9494bb690dbdf8d5a Mon Sep 17 00:00:00 2001 From: David Gibson Date: Tue, 6 Feb 2007 12:48:31 +1100 Subject: [POWERPC] Remove ibm4{xx,4x}.h from arch/powerpc ARCH=powerpc should not use the ghastly un-multiplatformable tangle of includes that starts with asm-ppc/ibm4xx.h. This patch removes a compile-breaking include of it from head_44x.S. Signed-off-by: David Gibson Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S index accb39d..a15d4b8 100644 --- a/arch/powerpc/kernel/head_44x.S +++ b/arch/powerpc/kernel/head_44x.S @@ -32,8 +32,6 @@ #include #include #include -#include -#include #include #include #include -- cgit v0.10.2 From 6e1d9d04c4004361fb327abcbde74a20e8dca2ff Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Mon, 12 Feb 2007 20:26:39 -0800 Subject: [IPV6] HASHTABLES: Use appropriate seed for caluculating ehash index. Tetsuo Handa told me that connect(2) with TCPv6 socket almost always took a few minutes to return when we did not have any ports available in the range of net.ipv4.ip_local_port_range. The reason was that we used incorrect seed for calculating index of hash when we check established sockets in __inet6_check_established(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/inet6_hashtables.c b/net/ipv6/inet6_hashtables.c index 30b16da..ae6b0e7 100644 --- a/net/ipv6/inet6_hashtables.c +++ b/net/ipv6/inet6_hashtables.c @@ -172,7 +172,7 @@ static int __inet6_check_established(struct inet_timewait_death_row *death_row, const struct in6_addr *saddr = &np->daddr; const int dif = sk->sk_bound_dev_if; const __portpair ports = INET_COMBINED_PORTS(inet->dport, lport); - const unsigned int hash = inet6_ehashfn(daddr, inet->num, saddr, + const unsigned int hash = inet6_ehashfn(daddr, lport, saddr, inet->dport); struct inet_ehash_bucket *head = inet_ehash_bucket(hinfo, hash); struct sock *sk2; -- cgit v0.10.2 From e2e01bfef8399c8f39c9fdf4a5576039069e760c Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Mon, 12 Feb 2007 20:27:10 -0800 Subject: [XFRM]: Fix IPv4 tunnel mode decapsulation with IPV6=n Add missing break when CONFIG_IPV6=n. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/net/ipv4/xfrm4_mode_tunnel.c b/net/ipv4/xfrm4_mode_tunnel.c index e54c549..e1cab33 100644 --- a/net/ipv4/xfrm4_mode_tunnel.c +++ b/net/ipv4/xfrm4_mode_tunnel.c @@ -95,6 +95,7 @@ static int xfrm4_tunnel_input(struct xfrm_state *x, struct sk_buff *skb) switch(iph->protocol){ case IPPROTO_IPIP: + break; #if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE) case IPPROTO_IPV6: break; -- cgit v0.10.2 From cbca567ea5b337eaa2685606cbb9183e79b8f97f Mon Sep 17 00:00:00 2001 From: Akira Iguchi Date: Fri, 9 Feb 2007 16:53:59 +0900 Subject: [POWERPC] Celleb: improve MMU hashtable locking Disabling IRQ is required only in invalidation. This changes "spin_lock_irqsave" to "spin_lock" in other ops. Signed-off-by: Kou Ishizaki Signed-off-by: Akira Iguchi Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/platforms/celleb/htab.c b/arch/powerpc/platforms/celleb/htab.c index ffa7c2c..279d733 100644 --- a/arch/powerpc/platforms/celleb/htab.c +++ b/arch/powerpc/platforms/celleb/htab.c @@ -95,7 +95,6 @@ static long beat_lpar_hpte_insert(unsigned long hpte_group, unsigned long lpar_rc; unsigned long slot; unsigned long hpte_v, hpte_r; - unsigned long flags; /* same as iseries */ if (vflags & HPTE_V_SECONDARY) @@ -115,17 +114,17 @@ static long beat_lpar_hpte_insert(unsigned long hpte_group, if (rflags & (_PAGE_GUARDED|_PAGE_NO_CACHE)) hpte_r &= ~_PAGE_COHERENT; - spin_lock_irqsave(&beat_htab_lock, flags); + spin_lock(&beat_htab_lock); if ((lpar_rc = beat_read_mask(hpte_group)) == 0) { if (!(vflags & HPTE_V_BOLTED)) DBG_LOW(" full\n"); - spin_unlock_irqrestore(&beat_htab_lock, flags); + spin_unlock(&beat_htab_lock); return -1; } lpar_rc = beat_insert_htab_entry(0, hpte_group, lpar_rc << 48, hpte_v, hpte_r, &slot); - spin_unlock_irqrestore(&beat_htab_lock, flags); + spin_unlock(&beat_htab_lock); /* * Since we try and ioremap PHBs we don't own, the pte insert @@ -189,7 +188,6 @@ static long beat_lpar_hpte_updatepp(unsigned long slot, { unsigned long lpar_rc; unsigned long dummy0, dummy1, want_v; - unsigned long flags; want_v = hpte_encode_v(va, psize); @@ -197,17 +195,17 @@ static long beat_lpar_hpte_updatepp(unsigned long slot, "avpnv=%016lx, slot=%016lx, psize: %d, newpp %016lx ... ", want_v & HPTE_V_AVPN, slot, psize, newpp); - spin_lock_irqsave(&beat_htab_lock, flags); + spin_lock(&beat_htab_lock); dummy0 = beat_lpar_hpte_getword0(slot); if ((dummy0 & ~0x7FUL) != (want_v & ~0x7FUL)) { DBG_LOW("not found !\n"); - spin_unlock_irqrestore(&beat_htab_lock, flags); + spin_unlock(&beat_htab_lock); return -1; } lpar_rc = beat_write_htab_entry(0, slot, 0, newpp, 0, 7, &dummy0, &dummy1); - spin_unlock_irqrestore(&beat_htab_lock, flags); + spin_unlock(&beat_htab_lock); if (lpar_rc != 0 || dummy0 == 0) { DBG_LOW("not found !\n"); return -1; @@ -256,18 +254,17 @@ static void beat_lpar_hpte_updateboltedpp(unsigned long newpp, int psize) { unsigned long lpar_rc, slot, vsid, va, dummy0, dummy1; - unsigned long flags; vsid = get_kernel_vsid(ea); va = (vsid << 28) | (ea & 0x0fffffff); - spin_lock_irqsave(&beat_htab_lock, flags); + spin_lock(&beat_htab_lock); slot = beat_lpar_hpte_find(va, psize); BUG_ON(slot == -1); lpar_rc = beat_write_htab_entry(0, slot, 0, newpp, 0, 7, &dummy0, &dummy1); - spin_unlock_irqrestore(&beat_htab_lock, flags); + spin_unlock(&beat_htab_lock); BUG_ON(lpar_rc != 0); } -- cgit v0.10.2 From 9ea8b7c96f64f68548976ba65062cee2f2b7d831 Mon Sep 17 00:00:00 2001 From: Pavel Fedin Date: Mon, 29 Jan 2007 15:13:03 +0300 Subject: [POWERPC] Virtual DMA support for floppy driver for new powerpc architecture During ppc64+ppc merge virtual DMA code for floppy driver was not ported. This patch restores virtual DMA support for floppy in new powerpc target. It is necessary at least on Pegasos and AmigaOne machines for the floppy drive to function. ISA DMA controller works incorrectly there due to its addressing limitations. Virtual DMA mode is activated by floppy=nodma option passed to the kernel (or module). There's no automatic switch like on i386. Signed-off-by: Pavel Fedin Signed-off-by: Paul Mackerras diff --git a/include/asm-powerpc/floppy.h b/include/asm-powerpc/floppy.h index fd242a2..a0f14ee 100644 --- a/include/asm-powerpc/floppy.h +++ b/include/asm-powerpc/floppy.h @@ -17,28 +17,115 @@ #define fd_outb(value,port) outb_p(value,port) #define fd_enable_dma() enable_dma(FLOPPY_DMA) -#define fd_disable_dma() disable_dma(FLOPPY_DMA) -#define fd_request_dma() request_dma(FLOPPY_DMA, "floppy") -#define fd_free_dma() free_dma(FLOPPY_DMA) +#define fd_disable_dma() fd_ops->_disable_dma(FLOPPY_DMA) +#define fd_free_dma() fd_ops->_free_dma(FLOPPY_DMA) #define fd_clear_dma_ff() clear_dma_ff(FLOPPY_DMA) #define fd_set_dma_mode(mode) set_dma_mode(FLOPPY_DMA, mode) #define fd_set_dma_count(count) set_dma_count(FLOPPY_DMA, count) +#define fd_get_dma_residue() fd_ops->_get_dma_residue(FLOPPY_DMA) #define fd_enable_irq() enable_irq(FLOPPY_IRQ) #define fd_disable_irq() disable_irq(FLOPPY_IRQ) #define fd_cacheflush(addr,size) /* nothing */ -#define fd_request_irq() request_irq(FLOPPY_IRQ, floppy_interrupt, \ - IRQF_DISABLED, "floppy", NULL) #define fd_free_irq() free_irq(FLOPPY_IRQ, NULL); -#ifdef CONFIG_PCI - #include #include /* for ppc64_isabridge_dev */ -#define fd_dma_setup(addr,size,mode,io) powerpc_fd_dma_setup(addr,size,mode,io) +#define fd_dma_setup(addr,size,mode,io) fd_ops->_dma_setup(addr,size,mode,io) + +static int fd_request_dma(void); + +struct fd_dma_ops { + void (*_disable_dma)(unsigned int dmanr); + void (*_free_dma)(unsigned int dmanr); + int (*_get_dma_residue)(unsigned int dummy); + int (*_dma_setup)(char *addr, unsigned long size, int mode, int io); +}; + +static int virtual_dma_count; +static int virtual_dma_residue; +static char *virtual_dma_addr; +static int virtual_dma_mode; +static int doing_vdma; +static struct fd_dma_ops *fd_ops; + +static irqreturn_t floppy_hardint(int irq, void *dev_id) +{ + unsigned char st; + int lcount; + char *lptr; + + if (!doing_vdma) + return floppy_interrupt(irq, dev_id); + + + st = 1; + for (lcount=virtual_dma_count, lptr=virtual_dma_addr; + lcount; lcount--, lptr++) { + st=inb(virtual_dma_port+4) & 0xa0 ; + if (st != 0xa0) + break; + if (virtual_dma_mode) + outb_p(*lptr, virtual_dma_port+5); + else + *lptr = inb_p(virtual_dma_port+5); + } + virtual_dma_count = lcount; + virtual_dma_addr = lptr; + st = inb(virtual_dma_port+4); + + if (st == 0x20) + return IRQ_HANDLED; + if (!(st & 0x20)) { + virtual_dma_residue += virtual_dma_count; + virtual_dma_count=0; + doing_vdma = 0; + floppy_interrupt(irq, dev_id); + return IRQ_HANDLED; + } + return IRQ_HANDLED; +} -static __inline__ int powerpc_fd_dma_setup(char *addr, unsigned long size, - int mode, int io) +static void vdma_disable_dma(unsigned int dummy) +{ + doing_vdma = 0; + virtual_dma_residue += virtual_dma_count; + virtual_dma_count=0; +} + +static void vdma_nop(unsigned int dummy) +{ +} + + +static int vdma_get_dma_residue(unsigned int dummy) +{ + return virtual_dma_count + virtual_dma_residue; +} + + +static int fd_request_irq(void) +{ + if (can_use_virtual_dma) + return request_irq(FLOPPY_IRQ, floppy_hardint, + IRQF_DISABLED, "floppy", NULL); + else + return request_irq(FLOPPY_IRQ, floppy_interrupt, + IRQF_DISABLED, "floppy", NULL); +} + +static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io) +{ + doing_vdma = 1; + virtual_dma_port = io; + virtual_dma_mode = (mode == DMA_MODE_WRITE); + virtual_dma_addr = addr; + virtual_dma_count = size; + virtual_dma_residue = 0; + return 0; +} + +static int hard_dma_setup(char *addr, unsigned long size, int mode, int io) { static unsigned long prev_size; static dma_addr_t bus_addr = 0; @@ -46,6 +133,7 @@ static __inline__ int powerpc_fd_dma_setup(char *addr, unsigned long size, static int prev_dir; int dir; + doing_vdma = 0; dir = (mode == DMA_MODE_READ) ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE; if (bus_addr @@ -74,11 +162,32 @@ static __inline__ int powerpc_fd_dma_setup(char *addr, unsigned long size, return 0; } -#endif /* CONFIG_PCI */ +static struct fd_dma_ops real_dma_ops = +{ + ._disable_dma = disable_dma, + ._free_dma = free_dma, + ._get_dma_residue = get_dma_residue, + ._dma_setup = hard_dma_setup +}; + +static struct fd_dma_ops virt_dma_ops = +{ + ._disable_dma = vdma_disable_dma, + ._free_dma = vdma_nop, + ._get_dma_residue = vdma_get_dma_residue, + ._dma_setup = vdma_dma_setup +}; -__inline__ void virtual_dma_init(void) +static int fd_request_dma() { - /* Nothing to do on PowerPC */ + if (can_use_virtual_dma & 1) { + fd_ops = &virt_dma_ops; + return 0; + } + else { + fd_ops = &real_dma_ops; + return request_dma(FLOPPY_DMA, "floppy"); + } } static int FDC1 = 0x3f0; -- cgit v0.10.2 From 872758563d7f132d25fc06857bd19df06c5c70c7 Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Sat, 10 Feb 2007 21:35:12 +0100 Subject: [POWERPC] move variables in drivers/macintosh to bss Move all the initialized variables to bss. Mark a version string as const. Signed-off-by: Olaf Hering Signed-off-by: Paul Mackerras diff --git a/drivers/macintosh/adbhid.c b/drivers/macintosh/adbhid.c index 1c7d6f2..b77ef51 100644 --- a/drivers/macintosh/adbhid.c +++ b/drivers/macintosh/adbhid.c @@ -574,8 +574,8 @@ static struct adb_request led_request; static int leds_pending[16]; static int leds_req_pending; static int pending_devs[16]; -static int pending_led_start=0; -static int pending_led_end=0; +static int pending_led_start; +static int pending_led_end; static DEFINE_SPINLOCK(leds_lock); static void leds_done(struct adb_request *req) diff --git a/drivers/macintosh/apm_emu.c b/drivers/macintosh/apm_emu.c index a6d50f4..c5e4d43 100644 --- a/drivers/macintosh/apm_emu.c +++ b/drivers/macintosh/apm_emu.c @@ -102,7 +102,7 @@ static struct pmu_sleep_notifier apm_sleep_notifier = { SLEEP_LEVEL_USERLAND, }; -static char driver_version[] = "0.5"; /* no spaces */ +static const char driver_version[] = "0.5"; /* no spaces */ #ifdef DEBUG static char * apm_event_name[] = { diff --git a/drivers/macintosh/mac_hid.c b/drivers/macintosh/mac_hid.c index ee6b4ca..f632cec 100644 --- a/drivers/macintosh/mac_hid.c +++ b/drivers/macintosh/mac_hid.c @@ -17,10 +17,10 @@ static struct input_dev *emumousebtn; static int emumousebtn_input_register(void); -static int mouse_emulate_buttons = 0; +static int mouse_emulate_buttons; static int mouse_button2_keycode = KEY_RIGHTCTRL; /* right control key */ static int mouse_button3_keycode = KEY_RIGHTALT; /* right option key */ -static int mouse_last_keycode = 0; +static int mouse_last_keycode; #if defined(CONFIG_SYSCTL) /* file(s) in /proc/sys/dev/mac_hid */ diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c index 3d3bf16..a7ce559 100644 --- a/drivers/macintosh/therm_adt746x.c +++ b/drivers/macintosh/therm_adt746x.c @@ -48,11 +48,11 @@ static u8 FAN_SPD_SET[2] = {0x30, 0x31}; static u8 default_limits_local[3] = {70, 50, 70}; /* local, sensor1, sensor2 */ static u8 default_limits_chip[3] = {80, 65, 80}; /* local, sensor1, sensor2 */ -static const char *sensor_location[3] = {NULL, NULL, NULL}; +static const char *sensor_location[3]; -static int limit_adjust = 0; +static int limit_adjust; static int fan_speed = -1; -static int verbose = 0; +static int verbose; MODULE_AUTHOR("Colin Leroy "); MODULE_DESCRIPTION("Driver for ADT746x thermostat in iBook G4 and " diff --git a/drivers/macintosh/via-cuda.c b/drivers/macintosh/via-cuda.c index df66291..3797f50 100644 --- a/drivers/macintosh/via-cuda.c +++ b/drivers/macintosh/via-cuda.c @@ -86,7 +86,7 @@ static int data_index; #ifdef CONFIG_PPC static struct device_node *vias; #endif -static int cuda_fully_inited = 0; +static int cuda_fully_inited; #ifdef CONFIG_ADB static int cuda_probe(void); diff --git a/drivers/macintosh/via-macii.c b/drivers/macintosh/via-macii.c index 5d88d5b..175b3e5 100644 --- a/drivers/macintosh/via-macii.c +++ b/drivers/macintosh/via-macii.c @@ -107,10 +107,10 @@ static enum macii_state { awaiting_reply } macii_state; -static int need_poll = 0; -static int command_byte = 0; -static int last_reply = 0; -static int last_active = 0; +static int need_poll; +static int command_byte; +static int last_reply; +static int last_active; static struct adb_request *current_req; static struct adb_request *last_req; @@ -124,7 +124,7 @@ static int first_byte; static int prefix_len; static int status = ST_IDLE|TREQ; static int last_status; -static int driver_running = 0; +static int driver_running; /* debug level 10 required for ADB logging (should be && debug_adb, ideally) */ diff --git a/drivers/macintosh/via-maciisi.c b/drivers/macintosh/via-maciisi.c index 1f0aa5d..10051db 100644 --- a/drivers/macintosh/via-maciisi.c +++ b/drivers/macintosh/via-maciisi.c @@ -63,10 +63,10 @@ static volatile unsigned char *via; #undef DEBUG_MACIISI_ADB -static struct adb_request* current_req = NULL; -static struct adb_request* last_req = NULL; +static struct adb_request* current_req; +static struct adb_request* last_req; static unsigned char maciisi_rbuf[16]; -static unsigned char *reply_ptr = NULL; +static unsigned char *reply_ptr; static int data_index; static int reading_reply; static int reply_len; diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index 96bea4b..8794cab 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -141,13 +141,13 @@ static volatile int adb_int_pending; static volatile int disable_poll; static struct device_node *vias; static int pmu_kind = PMU_UNKNOWN; -static int pmu_fully_inited = 0; +static int pmu_fully_inited; static int pmu_has_adb; static struct device_node *gpio_node; -static unsigned char __iomem *gpio_reg = NULL; +static unsigned char __iomem *gpio_reg; static int gpio_irq = NO_IRQ; static int gpio_irq_enabled = -1; -static volatile int pmu_suspended = 0; +static volatile int pmu_suspended; static spinlock_t pmu_lock; static u8 pmu_intr_mask; static int pmu_version; @@ -180,7 +180,7 @@ int asleep; BLOCKING_NOTIFIER_HEAD(sleep_notifier_list); #ifdef CONFIG_ADB -static int adb_dev_map = 0; +static int adb_dev_map; static int pmu_adb_flags; static int pmu_probe(void); @@ -2776,7 +2776,7 @@ pmu_polled_request(struct adb_request *req) #if defined(CONFIG_PM) && defined(CONFIG_PPC32) -static int pmu_sys_suspended = 0; +static int pmu_sys_suspended; static int pmu_sys_suspend(struct sys_device *sysdev, pm_message_t state) { @@ -2816,7 +2816,6 @@ static struct sysdev_class pmu_sysclass = { }; static struct sys_device device_pmu = { - .id = 0, .cls = &pmu_sysclass, }; diff --git a/drivers/macintosh/via-pmu68k.c b/drivers/macintosh/via-pmu68k.c index 4f5b6fa..54baee5 100644 --- a/drivers/macintosh/via-pmu68k.c +++ b/drivers/macintosh/via-pmu68k.c @@ -96,10 +96,10 @@ static int data_index; static int data_len; static int adb_int_pending; static int pmu_adb_flags; -static int adb_dev_map = 0; +static int adb_dev_map; static struct adb_request bright_req_1, bright_req_2, bright_req_3; static int pmu_kind = PMU_UNKNOWN; -static int pmu_fully_inited = 0; +static int pmu_fully_inited; int asleep; BLOCKING_NOTIFIER_HEAD(sleep_notifier_list); -- cgit v0.10.2 From 2d99c41f05fc2a26737aacf943db03ca89841199 Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Sat, 10 Feb 2007 21:38:37 +0100 Subject: [POWERPC] Mark winbond IDE PCI resources with start 0 as unassigned libata calls pci_request_regions to claim PCI BAR 0 - 5 pci_request_regions fails if one of the regions cant be claimed. bar 5 has start == 0, __request_resource will fail. Tested on a p630 in SMP mode with pata_sl82c105 00:03.1 IDE interface: Symphony Labs SL82c105 (rev 05) (prog-if 8f [Master SecP SecO PriP PriO]) Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c index c69bd15..fa59124 100644 --- a/arch/powerpc/platforms/pseries/pci.c +++ b/arch/powerpc/platforms/pseries/pci.c @@ -98,6 +98,10 @@ static void fixup_winbond_82c105(struct pci_dev* dev) if (dev->resource[i].flags & IORESOURCE_IO && dev->bus->number == 0 && dev->devfn == 0x81) dev->resource[i].flags &= ~IORESOURCE_IO; + if (dev->resource[i].start == 0 && dev->resource[i].end) { + dev->resource[i].flags = 0; + dev->resource[i].end = 0; + } } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105, -- cgit v0.10.2 From a334bdbdda9659b8f50a8620a11249fde62ccfde Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Sat, 10 Feb 2007 21:40:00 +0100 Subject: [POWERPC] Correct AC Power: in /proc/pmu/info on ibook1 /proc/pmu/info contains AC Power: 0 when booting without battery. Force AC Power, it will be updated whenever the battery state changes. Signed-off-by: Olaf Hering Signed-off-by: Paul Mackerras diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index 8794cab..b6073bd 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -169,7 +169,7 @@ static int option_server_mode; int pmu_battery_count; int pmu_cur_battery; -unsigned int pmu_power_flags; +unsigned int pmu_power_flags = PMU_PWR_AC_PRESENT; struct pmu_battery_info pmu_batteries[PMU_MAX_BATTERIES]; static int query_batt_timer = BATTERY_POLLING_COUNT; static struct adb_request batt_req; -- cgit v0.10.2 From 7ac9a13717c10c5ee074a6b23096c8d277fa5712 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 12 Feb 2007 13:31:08 +1100 Subject: [POWERPC] Fix vDSO page count calculation The recent vDSO consolidation patches broke powerpc due to a mistake in the definition of MAXPAGES constants. This fixes it by moving to a dynamically allocated array of pages instead as I don't like much hard coded size limits. Also move the vdso initialisation to an initcall since it doesn't really need to be done -that- early. Applogies for not catching the breakage earlier, Roland _did_ CC me on his patches a while ago, I got busy with other things and forgot to test them. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index 50149ec..e46c31b 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -49,24 +49,23 @@ /* Max supported size for symbol names */ #define MAX_SYMNAME 64 -#define VDSO32_MAXPAGES (((0x3000 + PAGE_MASK) >> PAGE_SHIFT) + 2) -#define VDSO64_MAXPAGES (((0x3000 + PAGE_MASK) >> PAGE_SHIFT) + 2) - extern char vdso32_start, vdso32_end; static void *vdso32_kbase = &vdso32_start; -unsigned int vdso32_pages; -static struct page *vdso32_pagelist[VDSO32_MAXPAGES]; +static unsigned int vdso32_pages; +static struct page **vdso32_pagelist; unsigned long vdso32_sigtramp; unsigned long vdso32_rt_sigtramp; #ifdef CONFIG_PPC64 extern char vdso64_start, vdso64_end; static void *vdso64_kbase = &vdso64_start; -unsigned int vdso64_pages; -static struct page *vdso64_pagelist[VDSO64_MAXPAGES]; +static unsigned int vdso64_pages; +static struct page **vdso64_pagelist; unsigned long vdso64_rt_sigtramp; #endif /* CONFIG_PPC64 */ +static int vdso_ready; + /* * The vdso data page (aka. systemcfg for old ppc64 fans) is here. * Once the early boot kernel code no longer needs to muck around @@ -182,6 +181,9 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, unsigned long vdso_base; int rc; + if (!vdso_ready) + return 0; + #ifdef CONFIG_PPC64 if (test_thread_flag(TIF_32BIT)) { vdso_pagelist = vdso32_pagelist; @@ -661,7 +663,7 @@ static void __init vdso_setup_syscall_map(void) } -void __init vdso_init(void) +static int __init vdso_init(void) { int i; @@ -716,11 +718,13 @@ void __init vdso_init(void) #ifdef CONFIG_PPC64 vdso64_pages = 0; #endif - return; + return 0; } /* Make sure pages are in the correct state */ - BUG_ON(vdso32_pages + 2 > VDSO32_MAXPAGES); + vdso32_pagelist = kzalloc(sizeof(struct page *) * (vdso32_pages + 2), + GFP_KERNEL); + BUG_ON(vdso32_pagelist == NULL); for (i = 0; i < vdso32_pages; i++) { struct page *pg = virt_to_page(vdso32_kbase + i*PAGE_SIZE); ClearPageReserved(pg); @@ -731,7 +735,9 @@ void __init vdso_init(void) vdso32_pagelist[i] = NULL; #ifdef CONFIG_PPC64 - BUG_ON(vdso64_pages + 2 > VDSO64_MAXPAGES); + vdso64_pagelist = kzalloc(sizeof(struct page *) * (vdso64_pages + 2), + GFP_KERNEL); + BUG_ON(vdso64_pagelist == NULL); for (i = 0; i < vdso64_pages; i++) { struct page *pg = virt_to_page(vdso64_kbase + i*PAGE_SIZE); ClearPageReserved(pg); @@ -743,7 +749,13 @@ void __init vdso_init(void) #endif /* CONFIG_PPC64 */ get_page(virt_to_page(vdso_data)); + + smp_wmb(); + vdso_ready = 1; + + return 0; } +arch_initcall(vdso_init); int in_gate_area_no_task(unsigned long addr) { diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 77b4637..52f397c 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -384,9 +384,6 @@ void __init mem_init(void) initsize >> 10); mem_init_done = 1; - - /* Initialize the vDSO */ - vdso_init(); } /* diff --git a/include/asm-powerpc/vdso.h b/include/asm-powerpc/vdso.h index b9f9118..26fc449 100644 --- a/include/asm-powerpc/vdso.h +++ b/include/asm-powerpc/vdso.h @@ -18,16 +18,11 @@ #ifndef __ASSEMBLY__ -extern unsigned int vdso64_pages; -extern unsigned int vdso32_pages; - /* Offsets relative to thread->vdso_base */ extern unsigned long vdso64_rt_sigtramp; extern unsigned long vdso32_sigtramp; extern unsigned long vdso32_rt_sigtramp; -extern void vdso_init(void); - #else /* __ASSEMBLY__ */ #ifdef __VDSO64__ -- cgit v0.10.2 From ab9367e38fa97c2ed7f72fd5fa29d0d70d58df89 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 12 Feb 2007 11:29:04 +0100 Subject: [POWERPC] ppc: Add support for AMCC Taishan 440GX eval board This patch adds support for the AMCC Taishan PPC440GX evaluation board. This is still an arch/ppc port. I'm aware that the move of 4xx to arch/powerpc is making good progress right now. So this patch is mainly intended to make the Taishan support available for the community right now. Signed-off-by: Stefan Roese Signed-off-by: Paul Mackerras diff --git a/arch/ppc/configs/taishan_defconfig b/arch/ppc/configs/taishan_defconfig new file mode 100644 index 0000000..1ca0204 --- /dev/null +++ b/arch/ppc/configs/taishan_defconfig @@ -0,0 +1,1077 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20 +# Mon Feb 12 11:11:58 2007 +# +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_GENERIC_NVRAM=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Processor +# +# CONFIG_6xx is not set +# CONFIG_40x is not set +CONFIG_44x=y +# CONFIG_8xx is not set +# CONFIG_E200 is not set +# CONFIG_E500 is not set +CONFIG_PPC_DCR_NATIVE=y +CONFIG_PPC_DCR=y +CONFIG_BOOKE=y +CONFIG_PTE_64BIT=y +CONFIG_PHYS_64BIT=y +# CONFIG_MATH_EMULATION is not set +# CONFIG_KEXEC is not set +# CONFIG_CPU_FREQ is not set +CONFIG_4xx=y +CONFIG_WANT_EARLY_SERIAL=y + +# +# IBM 4xx options +# +# CONFIG_BAMBOO is not set +# CONFIG_EBONY is not set +# CONFIG_LUAN is not set +# CONFIG_YUCCA is not set +# CONFIG_OCOTEA is not set +CONFIG_TAISHAN=y +CONFIG_440GX=y +CONFIG_440A=y +CONFIG_IBM_OCP=y +CONFIG_IBM_EMAC4=y +CONFIG_PPC4xx_DMA=y +CONFIG_PPC4xx_EDMA=y +CONFIG_PPC_GEN550=y +CONFIG_NOT_COHERENT_CACHE=y + +# +# Platform options +# +# CONFIG_PC_KEYBOARD is not set +# CONFIG_HIGHMEM is not set +CONFIG_ARCH_POPULATES_NODE_MAP=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="ip=on console=ttyS0,115200" +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x01000000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_MULTIPLE_TABLES is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +CONFIG_BRIDGE=y +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_GEOMETRY is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x8000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_NAND_CAFE is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_IBM_EMAC=y +CONFIG_IBM_EMAC_RXB=128 +CONFIG_IBM_EMAC_TXB=128 +CONFIG_IBM_EMAC_POLL_WEIGHT=32 +CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256 +CONFIG_IBM_EMAC_RX_SKB_HEADROOM=0 +CONFIG_IBM_EMAC_PHY_RX_CLK_FIX=y +# CONFIG_IBM_EMAC_DEBUG is not set +CONFIG_IBM_EMAC_ZMII=y +CONFIG_IBM_EMAC_RGMII=y +CONFIG_IBM_EMAC_TAH=y +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=y +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +# CONFIG_PPP_ASYNC is not set +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +CONFIG_PPPOE=y +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_IBM_IIC=y +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Auxiliary Display support +# + +# +# Virtualization +# + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_JBD_DEBUG=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_KGDB is not set +# CONFIG_XMON is not set +CONFIG_BDI_SWITCH=y +# CONFIG_SERIAL_TEXT_DEBUG is not set +CONFIG_PPC_OCP=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig index 6980de4..705ae56 100644 --- a/arch/ppc/platforms/4xx/Kconfig +++ b/arch/ppc/platforms/4xx/Kconfig @@ -98,6 +98,12 @@ config OCOTEA help This option enables support for the IBM PPC440GX evaluation board. +config TAISHAN + bool "Taishan" + select WANT_EARLY_SERIAL + help + This option enables support for the AMCC PPC440GX evaluation board. + endchoice config EP405PC @@ -126,7 +132,7 @@ config 440GP config 440GX bool - depends on OCOTEA + depends on OCOTEA || TAISHAN default y config 440SP @@ -173,7 +179,7 @@ config BOOKE config IBM_OCP bool - depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT + depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || TAISHAN || WALNUT default y config IBM_EMAC4 diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile index a04a0d0..fa6610b 100644 --- a/arch/ppc/platforms/4xx/Makefile +++ b/arch/ppc/platforms/4xx/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_OCOTEA) += ocotea.o obj-$(CONFIG_REDWOOD_5) += redwood5.o obj-$(CONFIG_REDWOOD_6) += redwood6.o obj-$(CONFIG_SYCAMORE) += sycamore.o +obj-$(CONFIG_TAISHAN) += taishan.o obj-$(CONFIG_WALNUT) += walnut.o obj-$(CONFIG_XILINX_ML300) += xilinx_ml300.o obj-$(CONFIG_XILINX_ML403) += xilinx_ml403.o diff --git a/arch/ppc/platforms/4xx/taishan.c b/arch/ppc/platforms/4xx/taishan.c new file mode 100644 index 0000000..bb0253e --- /dev/null +++ b/arch/ppc/platforms/4xx/taishan.c @@ -0,0 +1,395 @@ +/* + * arch/ppc/platforms/4xx/taishan.c + * + * AMCC Taishan board specific routines + * + * Copyright 2007 DENX Software Engineering, Stefan Roese + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include + +extern bd_t __res; + +static struct ibm44x_clocks clocks __initdata; + +/* + * NOR FLASH configuration (using mtd physmap driver) + */ + +/* start will be added dynamically, end is always fixed */ +static struct resource taishan_nor_resource = { + .start = TAISHAN_FLASH_ADDR, + .end = 0x1ffffffffULL, + .flags = IORESOURCE_MEM, +}; + +#define RW_PART0_OF 0 +#define RW_PART0_SZ 0x180000 +#define RW_PART1_SZ 0x200000 +/* Partition 2 will be autosized dynamically... */ +#define RW_PART3_SZ 0x80000 +#define RW_PART4_SZ 0x40000 + +static struct mtd_partition taishan_nor_parts[] = { + { + .name = "kernel", + .offset = 0, + .size = RW_PART0_SZ + }, + { + .name = "root", + .offset = MTDPART_OFS_APPEND, + .size = RW_PART1_SZ, + }, + { + .name = "user", + .offset = MTDPART_OFS_APPEND, +/* .size = RW_PART2_SZ */ /* will be adjusted dynamically */ + }, + { + .name = "env", + .offset = MTDPART_OFS_APPEND, + .size = RW_PART3_SZ, + }, + { + .name = "u-boot", + .offset = MTDPART_OFS_APPEND, + .size = RW_PART4_SZ, + } +}; + +static struct physmap_flash_data taishan_nor_data = { + .width = 4, + .parts = taishan_nor_parts, + .nr_parts = ARRAY_SIZE(taishan_nor_parts), +}; + +static struct platform_device taishan_nor_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &taishan_nor_data, + }, + .num_resources = 1, + .resource = &taishan_nor_resource, +}; + +static int taishan_setup_flash(void) +{ + /* + * Adjust partition 2 to flash size + */ + taishan_nor_parts[2].size = __res.bi_flashsize - + RW_PART0_SZ - RW_PART1_SZ - RW_PART3_SZ - RW_PART4_SZ; + + platform_device_register(&taishan_nor_device); + + return 0; +} +arch_initcall(taishan_setup_flash); + +static void __init +taishan_calibrate_decr(void) +{ + unsigned int freq; + + if (mfspr(SPRN_CCR1) & CCR1_TCS) + freq = TAISHAN_TMR_CLK; + else + freq = clocks.cpu; + + ibm44x_calibrate_decr(freq); +} + +static int +taishan_show_cpuinfo(struct seq_file *m) +{ + seq_printf(m, "vendor\t\t: AMCC\n"); + seq_printf(m, "machine\t\t: PPC440GX EVB (Taishan)\n"); + ibm440gx_show_cpuinfo(m); + return 0; +} + +static inline int +taishan_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + { 23, 24, 25, 26 }, /* IDSEL 1 - PCI Slot 0 */ + { 24, 25, 26, 23 }, /* IDSEL 2 - PCI Slot 1 */ + }; + + const long min_idsel = 1, max_idsel = 2, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} + +static void __init taishan_set_emacdata(void) +{ + struct ocp_def *def; + struct ocp_func_emac_data *emacdata; + int i; + + /* Set phy_map, phy_mode, and mac_addr for each EMAC */ + for (i=2; i<4; i++) { + def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i); + emacdata = def->additions; + if (i < 2) { + emacdata->phy_map = 0x00000001; /* Skip 0x00 */ + emacdata->phy_mode = PHY_MODE_SMII; + } else { + emacdata->phy_map = 0x00000001; /* Skip 0x00 */ + emacdata->phy_mode = PHY_MODE_RGMII; + } + if (i == 0) + memcpy(emacdata->mac_addr, "\0\0\0\0\0\0", 6); + else if (i == 1) + memcpy(emacdata->mac_addr, "\0\0\0\0\0\0", 6); + else if (i == 2) + memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6); + else if (i == 3) + memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6); + } +} + +#define PCIX_READW(offset) \ + (readw(pcix_reg_base+offset)) + +#define PCIX_WRITEW(value, offset) \ + (writew(value, pcix_reg_base+offset)) + +#define PCIX_WRITEL(value, offset) \ + (writel(value, pcix_reg_base+offset)) + +/* + * FIXME: This is only here to "make it work". This will move + * to a ibm_pcix.c which will contain a generic IBM PCIX bridge + * configuration library. -Matt + */ +static void __init +taishan_setup_pcix(void) +{ + void *pcix_reg_base; + + pcix_reg_base = ioremap64(PCIX0_REG_BASE, PCIX_REG_SIZE); + + /* Enable PCIX0 I/O, Mem, and Busmaster cycles */ + PCIX_WRITEW(PCIX_READW(PCIX0_COMMAND) | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, PCIX0_COMMAND); + + /* Disable all windows */ + PCIX_WRITEL(0, PCIX0_POM0SA); + PCIX_WRITEL(0, PCIX0_POM1SA); + PCIX_WRITEL(0, PCIX0_POM2SA); + PCIX_WRITEL(0, PCIX0_PIM0SA); + PCIX_WRITEL(0, PCIX0_PIM0SAH); + PCIX_WRITEL(0, PCIX0_PIM1SA); + PCIX_WRITEL(0, PCIX0_PIM2SA); + PCIX_WRITEL(0, PCIX0_PIM2SAH); + + /* Setup 2GB PLB->PCI outbound mem window (3_8000_0000->0_8000_0000) */ + PCIX_WRITEL(0x00000003, PCIX0_POM0LAH); + PCIX_WRITEL(0x80000000, PCIX0_POM0LAL); + PCIX_WRITEL(0x00000000, PCIX0_POM0PCIAH); + PCIX_WRITEL(0x80000000, PCIX0_POM0PCIAL); + PCIX_WRITEL(0x80000001, PCIX0_POM0SA); + + /* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */ + PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH); + PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL); + PCIX_WRITEL(0xe0000007, PCIX0_PIM0SA); + PCIX_WRITEL(0xffffffff, PCIX0_PIM0SAH); + + iounmap(pcix_reg_base); + + eieio(); +} + +static void __init +taishan_setup_hose(void) +{ + struct pci_controller *hose; + + /* Configure windows on the PCI-X host bridge */ + taishan_setup_pcix(); + + hose = pcibios_alloc_controller(); + + if (!hose) + return; + + hose->first_busno = 0; + hose->last_busno = 0xff; + + hose->pci_mem_offset = TAISHAN_PCI_MEM_OFFSET; + + pci_init_resource(&hose->io_resource, + TAISHAN_PCI_LOWER_IO, + TAISHAN_PCI_UPPER_IO, + IORESOURCE_IO, + "PCI host bridge"); + + pci_init_resource(&hose->mem_resources[0], + TAISHAN_PCI_LOWER_MEM, + TAISHAN_PCI_UPPER_MEM, + IORESOURCE_MEM, + "PCI host bridge"); + + hose->io_space.start = TAISHAN_PCI_LOWER_IO; + hose->io_space.end = TAISHAN_PCI_UPPER_IO; + hose->mem_space.start = TAISHAN_PCI_LOWER_MEM; + hose->mem_space.end = TAISHAN_PCI_UPPER_MEM; + hose->io_base_virt = ioremap64(TAISHAN_PCI_IO_BASE, TAISHAN_PCI_IO_SIZE); + isa_io_base = (unsigned long) hose->io_base_virt; + + setup_indirect_pci(hose, + TAISHAN_PCI_CFGA_PLB32, + TAISHAN_PCI_CFGD_PLB32); + hose->set_cfg_type = 1; + + hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); + + ppc_md.pci_swizzle = common_swizzle; + ppc_md.pci_map_irq = taishan_map_irq; +} + + +static void __init +taishan_early_serial_map(void) +{ + struct uart_port port; + + /* Setup ioremapped serial port access */ + memset(&port, 0, sizeof(port)); + port.membase = ioremap64(PPC440GX_UART0_ADDR, 8); + port.irq = UART0_INT; + port.uartclk = clocks.uart0; + port.regshift = 0; + port.iotype = UPIO_MEM; + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; + port.line = 0; + + if (early_serial_setup(&port) != 0) + printk("Early serial init of port 0 failed\n"); + +#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) + /* Configure debug serial access */ + gen550_init(0, &port); + + /* Purge TLB entry added in head_44x.S for early serial access */ + _tlbie(UART0_IO_BASE); +#endif + + port.membase = ioremap64(PPC440GX_UART1_ADDR, 8); + port.irq = UART1_INT; + port.uartclk = clocks.uart1; + port.line = 1; + + if (early_serial_setup(&port) != 0) + printk("Early serial init of port 1 failed\n"); + +#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) + /* Configure debug serial access */ + gen550_init(1, &port); +#endif +} + +static void __init +taishan_setup_arch(void) +{ + taishan_set_emacdata(); + + ibm440gx_tah_enable(); + + /* + * Determine various clocks. + * To be completely correct we should get SysClk + * from FPGA, because it can be changed by on-board switches + * --ebs + */ + ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200); + ocp_sys_info.opb_bus_freq = clocks.opb; + + /* init to some ~sane value until calibrate_delay() runs */ + loops_per_jiffy = 50000000/HZ; + + /* Setup PCI host bridge */ + taishan_setup_hose(); + +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif + + taishan_early_serial_map(); + + /* Identify the system */ + printk("AMCC PowerPC 440GX Taishan Platform\n"); +} + +static void __init taishan_init(void) +{ + ibm440gx_l2c_setup(&clocks); +} + +void __init platform_init(unsigned long r3, unsigned long r4, + unsigned long r5, unsigned long r6, unsigned long r7) +{ + ibm44x_platform_init(r3, r4, r5, r6, r7); + + ppc_md.setup_arch = taishan_setup_arch; + ppc_md.show_cpuinfo = taishan_show_cpuinfo; + ppc_md.get_irq = NULL; /* Set in ppc4xx_pic_init() */ + + ppc_md.calibrate_decr = taishan_calibrate_decr; + +#ifdef CONFIG_KGDB + ppc_md.early_serial_map = taishan_early_serial_map; +#endif + ppc_md.init = taishan_init; +} + diff --git a/arch/ppc/platforms/4xx/taishan.h b/arch/ppc/platforms/4xx/taishan.h new file mode 100644 index 0000000..ea7561a --- /dev/null +++ b/arch/ppc/platforms/4xx/taishan.h @@ -0,0 +1,67 @@ +/* + * arch/ppc/platforms/4xx/taishan.h + * + * AMCC Taishan board definitions + * + * Copyright 2007 DENX Software Engineering, Stefan Roese + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifdef __KERNEL__ +#ifndef __ASM_TAISHAN_H__ +#define __ASM_TAISHAN_H__ + +#include + +/* External timer clock frequency */ +#define TAISHAN_TMR_CLK 25000000 + +/* Flash */ +#define TAISHAN_FPGA_ADDR 0x0000000141000000ULL +#define TAISHAN_LCM_ADDR 0x0000000142000000ULL +#define TAISHAN_FLASH_ADDR 0x00000001fc000000ULL +#define TAISHAN_FLASH_SIZE 0x4000000 + +/* + * Serial port defines + */ +#define RS_TABLE_SIZE 2 + +/* head_44x.S created UART mapping, used before early_serial_setup. + * We cannot use default OpenBIOS UART mappings because they + * don't work for configurations with more than 512M RAM. --ebs + */ +#define UART0_IO_BASE 0xF0000200 +#define UART1_IO_BASE 0xF0000300 + +#define BASE_BAUD 11059200/16 +#define STD_UART_OP(num) \ + { 0, BASE_BAUD, 0, UART##num##_INT, \ + (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ + iomem_base: (void*)UART##num##_IO_BASE, \ + io_type: SERIAL_IO_MEM}, + +#define SERIAL_PORT_DFNS \ + STD_UART_OP(0) \ + STD_UART_OP(1) + +/* PCI support */ +#define TAISHAN_PCI_LOWER_IO 0x00000000 +#define TAISHAN_PCI_UPPER_IO 0x0000ffff +#define TAISHAN_PCI_LOWER_MEM 0x80000000 +#define TAISHAN_PCI_UPPER_MEM 0xffffefff + +#define TAISHAN_PCI_CFGA_PLB32 0x0ec00000 +#define TAISHAN_PCI_CFGD_PLB32 0x0ec00004 + +#define TAISHAN_PCI_IO_BASE 0x0000000208000000ULL +#define TAISHAN_PCI_IO_SIZE 0x00010000 +#define TAISHAN_PCI_MEM_OFFSET 0x00000000 + +#endif /* __ASM_TAISHAN_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index d84f0466..0991111 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -69,6 +69,7 @@ obj-$(CONFIG_SANDPOINT) += pci_auto.o todc_time.o obj-$(CONFIG_SBC82xx) += todc_time.o obj-$(CONFIG_SPRUCE) += cpc700_pic.o pci_auto.o \ todc_time.o +obj-$(CONFIG_TAISHAN) += pci_auto.o obj-$(CONFIG_8260) += m8260_setup.o pq2_devices.o pq2_sys.o \ ppc_sys.o obj-$(CONFIG_PCI_8260) += m82xx_pci.o pci_auto.o diff --git a/include/asm-ppc/ibm4xx.h b/include/asm-ppc/ibm4xx.h index 7a64ede..92fd02d 100644 --- a/include/asm-ppc/ibm4xx.h +++ b/include/asm-ppc/ibm4xx.h @@ -109,6 +109,10 @@ void ppc4xx_init(unsigned long r3, unsigned long r4, unsigned long r5, #include #endif +#if defined(CONFIG_TAISHAN) +#include +#endif + #ifndef __ASSEMBLY__ #ifdef CONFIG_40x /* -- cgit v0.10.2 From 9b96ea662b404b9ed882c78cb844510d804a83e6 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 12 Feb 2007 22:09:18 +1100 Subject: [POWERPC] Wire up sys_getcpu Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras diff --git a/include/asm-powerpc/systbl.h b/include/asm-powerpc/systbl.h index 97b4354..418e5c7 100644 --- a/include/asm-powerpc/systbl.h +++ b/include/asm-powerpc/systbl.h @@ -305,3 +305,4 @@ SYSCALL_SPU(faccessat) COMPAT_SYS_SPU(get_robust_list) COMPAT_SYS_SPU(set_robust_list) COMPAT_SYS(move_pages) +SYSCALL_SPU(getcpu) -- cgit v0.10.2 From 40d244d69a3871dd05a5fdae29f36823a6ee3e33 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 12 Feb 2007 22:10:48 +1100 Subject: [POWERPC] correct a prototype This rids us of a warning. Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index dd17dff..7ec4ac7 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -44,7 +44,7 @@ extern void __setup_cpu_745x(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_ppc970MP(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_pa6t(unsigned long offset, struct cpu_spec* spec); -extern void __restore_cpu_pa6t(unsigned long offset, struct cpu_spec* spec); +extern void __restore_cpu_pa6t(void); extern void __restore_cpu_ppc970(void); #endif /* CONFIG_PPC64 */ -- cgit v0.10.2 From e3aba81d154c53a82e2a7e0ff5e7f1162a53cf27 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 12 Feb 2007 13:36:55 -0700 Subject: [POWERPC] Fixup mp5200 drivers to match device tree changes Signed-off-by: Grant Likely Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c index cdb16bf..cc3b40d 100644 --- a/arch/powerpc/platforms/52xx/lite5200.c +++ b/arch/powerpc/platforms/52xx/lite5200.c @@ -51,13 +51,13 @@ */ static void __init -lite52xx_setup_cpu(void) +lite5200_setup_cpu(void) { struct mpc52xx_gpio __iomem *gpio; u32 port_config; /* Map zones */ - gpio = mpc52xx_find_and_map("mpc52xx-gpio"); + gpio = mpc52xx_find_and_map("mpc5200-gpio"); if (!gpio) { printk(KERN_ERR __FILE__ ": " "Error while mapping GPIO register for port config. " @@ -85,12 +85,12 @@ error: iounmap(gpio); } -static void __init lite52xx_setup_arch(void) +static void __init lite5200_setup_arch(void) { struct device_node *np; if (ppc_md.progress) - ppc_md.progress("lite52xx_setup_arch()", 0); + ppc_md.progress("lite5200_setup_arch()", 0); np = of_find_node_by_type(NULL, "cpu"); if (np) { @@ -105,7 +105,7 @@ static void __init lite52xx_setup_arch(void) /* CPU & Port mux setup */ mpc52xx_setup_cpu(); /* Generic */ - lite52xx_setup_cpu(); /* Platorm specific */ + lite5200_setup_cpu(); /* Platorm specific */ #ifdef CONFIG_PCI np = of_find_node_by_type(np, "pci"); @@ -126,7 +126,7 @@ static void __init lite52xx_setup_arch(void) } -void lite52xx_show_cpuinfo(struct seq_file *m) +void lite5200_show_cpuinfo(struct seq_file *m) { struct device_node* np = of_find_all_nodes(NULL); const char *model = NULL; @@ -143,25 +143,26 @@ void lite52xx_show_cpuinfo(struct seq_file *m) /* * Called very early, MMU is off, device-tree isn't unflattened */ -static int __init lite52xx_probe(void) +static int __init lite5200_probe(void) { unsigned long node = of_get_flat_dt_root(); const char *model = of_get_flat_dt_prop(node, "model", NULL); - if (!of_flat_dt_is_compatible(node, "lite52xx")) + if (!of_flat_dt_is_compatible(node, "fsl,lite5200") && + !of_flat_dt_is_compatible(node, "fsl,lite5200b")) return 0; - pr_debug("%s board w/ mpc52xx found\n", model ? model : "unknown"); + pr_debug("%s board found\n", model ? model : "unknown"); return 1; } -define_machine(lite52xx) { - .name = "lite52xx", - .probe = lite52xx_probe, - .setup_arch = lite52xx_setup_arch, +define_machine(lite5200) { + .name = "lite5200", + .probe = lite5200_probe, + .setup_arch = lite5200_setup_arch, .init = mpc52xx_declare_of_platform_devices, .init_IRQ = mpc52xx_init_irq, .get_irq = mpc52xx_get_irq, - .show_cpuinfo = lite52xx_show_cpuinfo, + .show_cpuinfo = lite5200_show_cpuinfo, .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c index cc40889..ed0cb69 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_common.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c @@ -83,8 +83,8 @@ mpc52xx_setup_cpu(void) struct mpc52xx_xlb __iomem *xlb; /* Map zones */ - cdm = mpc52xx_find_and_map("mpc52xx-cdm"); - xlb = mpc52xx_find_and_map("mpc52xx-xlb"); + cdm = mpc52xx_find_and_map("mpc5200-cdm"); + xlb = mpc52xx_find_and_map("mpc5200-xlb"); if (!cdm || !xlb) { printk(KERN_ERR __FILE__ ": " diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c index cd91a6c..c751925 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c @@ -383,16 +383,16 @@ void __init mpc52xx_init_irq(void) struct device_node *picnode; /* Remap the necessary zones */ - picnode = of_find_compatible_node(NULL, NULL, "mpc52xx-pic"); + picnode = of_find_compatible_node(NULL, NULL, "mpc5200-pic"); - intr = mpc52xx_find_and_map("mpc52xx-pic"); + intr = mpc52xx_find_and_map("mpc5200-pic"); if (!intr) - panic(__FILE__ ": find_and_map failed on 'mpc52xx-pic'. " + panic(__FILE__ ": find_and_map failed on 'mpc5200-pic'. " "Check node !"); - sdma = mpc52xx_find_and_map("mpc52xx-bestcomm"); + sdma = mpc52xx_find_and_map("mpc5200-bestcomm"); if (!sdma) - panic(__FILE__ ": find_and_map failed on 'mpc52xx-bestcomm'. " + panic(__FILE__ ": find_and_map failed on 'mpc5200-bestcomm'. " "Check node !"); /* Disable all interrupt sources. */ diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c index d7378df..29e1809 100644 --- a/drivers/ata/pata_mpc52xx.c +++ b/drivers/ata/pata_mpc52xx.c @@ -484,10 +484,8 @@ mpc52xx_ata_resume(struct of_device *op) static struct of_device_id mpc52xx_ata_of_match[] = { { - .compatible = "mpc5200-ata", - }, - { - .compatible = "mpc52xx-ata", + .type = "ata", + .compatible = "mpc5200-ata", }, {}, }; diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 3c4b6c2..955bbd6 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -127,8 +127,7 @@ static irqreturn_t mpc52xx_uart_int(int irq,void *dev_id); #if defined(CONFIG_PPC_MERGE) static struct of_device_id mpc52xx_uart_of_match[] = { - { .type = "serial", .compatible = "mpc52xx-psc-uart", }, - { .type = "serial", .compatible = "mpc5200-psc", }, /* Efika only! */ + { .type = "serial", .compatible = "mpc5200-psc-uart", }, {}, }; #endif @@ -1068,7 +1067,7 @@ mpc52xx_uart_of_enumerate(void) continue; /* Is a particular device number requested? */ - devno = get_property(np, "device_no", NULL); + devno = get_property(np, "port-number", NULL); mpc52xx_uart_of_assign(of_node_get(np), devno ? *devno : -1); } -- cgit v0.10.2 From 05cbbc692f513c0e62372abeab01b04b07096582 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 12 Feb 2007 13:36:54 -0700 Subject: [POWERPC] mpc5200 device tree bindings refinement Much needed refinement of mpc5200 device tree binding specifications. Short list: - drop mpc52xx designator; only two supported chips exist, 5200 and 5200b. It's premature to refer to them as '52xx'. - Specify optional 'model' and 'revision' properties in the soc5200 node - Specify reqiured 'cell-index' property to identify between multiple SOC devices of the same type. (Useful for arbitrating shared register access) - Specify optional 'port-number' property for adjusting the logical serial port assignments. - Specify optional 'has-wdt' property for gpt0 node. - Add system-frequency property to soc5200 node Signed-off-by: Grant Likely Signed-off-by: Paul Mackerras diff --git a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt b/Documentation/powerpc/mpc52xx-device-tree-bindings.txt index 69f016f..e59fcbb 100644 --- a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt +++ b/Documentation/powerpc/mpc52xx-device-tree-bindings.txt @@ -1,7 +1,7 @@ -MPC52xx Device Tree Bindings +MPC5200 Device Tree Bindings ---------------------------- -(c) 2006 Secret Lab Technologies Ltd +(c) 2006-2007 Secret Lab Technologies Ltd Grant Likely ********** DRAFT *********** @@ -20,11 +20,11 @@ described in Documentation/powerpc/booting-without-of.txt), or passed by Open Firmare (IEEE 1275) compatible firmware using an OF compatible client interface API. -This document specifies the requirements on the device-tree for mpc52xx +This document specifies the requirements on the device-tree for mpc5200 based boards. These requirements are above and beyond the details specified in either the OpenFirmware spec or booting-without-of.txt -All new mpc52xx-based boards are expected to match this document. In +All new mpc5200-based boards are expected to match this document. In cases where this document is not sufficient to support a new board port, this document should be updated as part of adding the new board support. @@ -32,26 +32,26 @@ II - Philosophy =============== The core of this document is naming convention. The whole point of defining this convention is to reduce or eliminate the number of -special cases required to support a 52xx board. If all 52xx boards -follow the same convention, then generic 52xx support code will work +special cases required to support a 5200 board. If all 5200 boards +follow the same convention, then generic 5200 support code will work rather than coding special cases for each new board. This section tries to capture the thought process behind why the naming convention is what it is. -1. Node names -------------- +1. names +--------- There is strong convention/requirements already established for children of the root node. 'cpus' describes the processor cores, 'memory' describes memory, and 'chosen' provides boot configuration. Other nodes are added to describe devices attached to the processor local bus. + Following convention already established with other system-on-chip -processors, MPC52xx boards must have an 'soc5200' node as a child of the -root node. +processors, 5200 device trees should use the name 'soc5200' for the +parent node of on chip devices, and the root node should be its parent. -The soc5200 node holds child nodes for all on chip devices. Child nodes -are typically named after the configured function. ie. the FEC node is -named 'ethernet', and a PSC in uart mode is named 'serial'. +Child nodes are typically named after the configured function. ie. +the FEC node is named 'ethernet', and a PSC in uart mode is named 'serial'. 2. device_type property ----------------------- @@ -66,28 +66,47 @@ exactly. Since device_type isn't enough to match devices to drivers, there also needs to be a naming convention for the compatible property. Compatible is an list of device descriptions sorted from specific to generic. For -the mpc52xx, the required format for each compatible value is --[-]. At the minimum, the list shall contain two -items; the first specifying the exact chip, and the second specifying -mpc52xx for the chip. - -ie. ethernet on mpc5200b: compatible = "mpc5200b-ethernet\0mpc52xx-ethernet" - -The idea here is that most drivers will match to the most generic field -in the compatible list (mpc52xx-*), but can also test the more specific -field for enabling bug fixes or extra features. +the mpc5200, the required format for each compatible value is +-[-]. The OS should be able to match a device driver +to the device based solely on the compatible value. If two drivers +match on the compatible list; the 'most compatible' driver should be +selected. + +The split between the MPC5200 and the MPC5200B leaves a bit of a +connundrum. How should the compatible property be set up to provide +maximum compatability information; but still acurately describe the +chip? For the MPC5200; the answer is easy. Most of the SoC devices +originally appeared on the MPC5200. Since they didn't exist anywhere +else; the 5200 compatible properties will contain only one item; +"mpc5200-". + +The 5200B is almost the same as the 5200, but not quite. It fixes +silicon bugs and it adds a small number of enhancements. Most of the +devices either provide exactly the same interface as on the 5200. A few +devices have extra functions but still have a backwards compatible mode. +To express this infomation as completely as possible, 5200B device trees +should have two items in the compatible list; +"mpc5200b-\0mpc5200-". It is *strongly* recommended +that 5200B device trees follow this convention (instead of only listing +the base mpc5200 item). + +If another chip appear on the market with one of the mpc5200 SoC +devices, then the compatible list should include mpc5200-. + +ie. ethernet on mpc5200: compatible = "mpc5200-ethernet" + ethernet on mpc5200b: compatible = "mpc5200b-ethernet\0mpc5200-ethernet" Modal devices, like PSCs, also append the configured function to the end of the compatible field. ie. A PSC in i2s mode would specify -"mpc52xx-psc-i2s", not "mpc52xx-i2s". This convention is chosen to +"mpc5200-psc-i2s", not "mpc5200-i2s". This convention is chosen to avoid naming conflicts with non-psc devices providing the same -function. For example, "mpc52xx-spi" and "mpc52xx-psc-spi" describe +function. For example, "mpc5200-spi" and "mpc5200-psc-spi" describe the mpc5200 simple spi device and a PSC spi mode respectively. If the soc device is more generic and present on other SOCs, the compatible property can specify the more generic device type also. -ie. mscan: compatible = "mpc5200-mscan\0mpc52xx-mscan\0fsl,mscan"; +ie. mscan: compatible = "mpc5200-mscan\0fsl,mscan"; At the time of writing, exact chip may be either 'mpc5200' or 'mpc5200b'. @@ -96,7 +115,7 @@ Device drivers should always try to match as generically as possible. III - Structure =============== -The device tree for an mpc52xx board follows the structure defined in +The device tree for an mpc5200 board follows the structure defined in booting-without-of.txt with the following additional notes: 0) the root node @@ -115,7 +134,7 @@ Typical memory description node; see booting-without-of. 3) The soc5200 node ------------------- -This node describes the on chip SOC peripherals. Every mpc52xx based +This node describes the on chip SOC peripherals. Every mpc5200 based board will have this node, and as such there is a common naming convention for SOC devices. @@ -125,71 +144,111 @@ name type description device_type string must be "soc" ranges int should be <0 baseaddr baseaddr+10000> reg int must be +compatible string mpc5200: "mpc5200-soc" + mpc5200b: "mpc5200b-soc\0mpc5200-soc" +system-frequency int Fsystem frequency; source of all + other clocks. +bus-frequency int IPB bus frequency in HZ. Clock rate + used by most of the soc devices. +#interrupt-cells int must be <3>. Recommended properties: name type description ---- ---- ----------- -compatible string should be "-soc\0mpc52xx-soc" - ie. "mpc5200b-soc\0mpc52xx-soc" -#interrupt-cells int must be <3>. If it is not defined - here then it must be defined in every - soc device node. -bus-frequency int IPB bus frequency in HZ. Clock rate - used by most of the soc devices. - Defining it here avoids needing it - added to every device node. +model string Exact model of the chip; + ie: model="fsl,mpc5200" +revision string Silicon revision of chip + ie: revision="M08A" + +The 'model' and 'revision' properties are *strongly* recommended. Having +them presence acts as a bit of a safety net for working around as yet +undiscovered bugs on one version of silicon. For example, device drivers +can use the model and revision properties to decide if a bug fix should +be turned on. 4) soc5200 child nodes ---------------------- Any on chip SOC devices available to Linux must appear as soc5200 child nodes. -Note: in the tables below, '*' matches all values. ie. -*-pic would translate to "mpc5200-pic\0mpc52xx-pic" +Note: The tables below show the value for the mpc5200. A mpc5200b device +tree should use the "mpc5200b-\0mpc5200- form. Required soc5200 child nodes: name device_type compatible Description ---- ----------- ---------- ----------- -cdm@ cdm *-cmd Clock Distribution -pic@ interrupt-controller *-pic need an interrupt +cdm@ cdm mpc5200-cmd Clock Distribution +pic@ interrupt-controller mpc5200-pic need an interrupt controller to boot -bestcomm@ dma-controller *-bestcomm 52xx pic also requires - the bestcomm device +bestcomm@ dma-controller mpc5200-bestcomm 5200 pic also requires + the bestcomm device Recommended soc5200 child nodes; populate as needed for your board -name device_type compatible Description ----- ----------- ---------- ----------- -gpt@ gpt *-gpt General purpose timers -rtc@ rtc *-rtc Real time clock -mscan@ mscan *-mscan CAN bus controller -pci@ pci *-pci PCI bridge -serial@ serial *-psc-uart PSC in serial mode -i2s@ sound *-psc-i2s PSC in i2s mode -ac97@ sound *-psc-ac97 PSC in ac97 mode -spi@ spi *-psc-spi PSC in spi mode -irda@ irda *-psc-irda PSC in IrDA mode -spi@ spi *-spi MPC52xx spi device -ethernet@ network *-fec MPC52xx ethernet device -ata@ ata *-ata IDE ATA interface -i2c@ i2c *-i2c I2C controller -usb@ usb-ohci-be *-ohci,ohci-be USB controller -xlb@ xlb *-xlb XLB arbritrator +name device_type compatible Description +---- ----------- ---------- ----------- +gpt@ gpt mpc5200-gpt General purpose timers +rtc@ rtc mpc5200-rtc Real time clock +mscan@ mscan mpc5200-mscan CAN bus controller +pci@ pci mpc5200-pci PCI bridge +serial@ serial mpc5200-psc-uart PSC in serial mode +i2s@ sound mpc5200-psc-i2s PSC in i2s mode +ac97@ sound mpc5200-psc-ac97 PSC in ac97 mode +spi@ spi mpc5200-psc-spi PSC in spi mode +irda@ irda mpc5200-psc-irda PSC in IrDA mode +spi@ spi mpc5200-spi MPC5200 spi device +ethernet@ network mpc5200-fec MPC5200 ethernet device +ata@ ata mpc5200-ata IDE ATA interface +i2c@ i2c mpc5200-i2c I2C controller +usb@ usb-ohci-be mpc5200-ohci,ohci-be USB controller +xlb@ xlb mpc5200-xlb XLB arbritrator + +Important child node properties +name type description +---- ---- ----------- +cell-index int When multiple devices are present, is the + index of the device in the hardware (ie. There + are 6 PSC on the 5200 numbered PSC1 to PSC6) + PSC1 has 'cell-index = <0>' + PSC4 has 'cell-index = <3>' + +5) General Purpose Timer nodes (child of soc5200 node) +On the mpc5200 and 5200b, GPT0 has a watchdog timer function. If the board +design supports the internal wdt, then the device node for GPT0 should +include the empty property 'has-wdt'. + +6) PSC nodes (child of soc5200 node) +PSC nodes can define the optional 'port-number' property to force assignment +order of serial ports. For example, PSC5 might be physically connected to +the port labeled 'COM1' and PSC1 wired to 'COM1'. In this case, PSC5 would +have a "port-number = <0>" property, and PSC1 would have "port-number = <1>". + +PSC in i2s mode: The mpc5200 and mpc5200b PSCs are not compatible when in +i2s mode. An 'mpc5200b-psc-i2s' node cannot include 'mpc5200-psc-i2s' in the +compatible field. IV - Extra Notes ================ 1. Interrupt mapping -------------------- -The mpc52xx pic driver splits hardware IRQ numbers into two levels. The +The mpc5200 pic driver splits hardware IRQ numbers into two levels. The split reflects the layout of the PIC hardware itself, which groups interrupts into one of three groups; CRIT, MAIN or PERP. Also, the Bestcomm dma engine has it's own set of interrupt sources which are cascaded off of peripheral interrupt 0, which the driver interprets as a fourth group, SDMA. -The interrupts property for device nodes using the mpc52xx pic consists +The interrupts property for device nodes using the mpc5200 pic consists of three cells; L1 := [CRIT=0, MAIN=1, PERP=2, SDMA=3] L2 := interrupt number; directly mapped from the value in the "ICTL PerStat, MainStat, CritStat Encoded Register" level := [LEVEL_HIGH=0, EDGE_RISING=1, EDGE_FALLING=2, LEVEL_LOW=3] + +2. Shared registers +------------------- +Some SoC devices share registers between them. ie. the i2c devices use +a single clock control register, and almost all device are affected by +the port_config register. Devices which need to manipulate shared regs +should look to the parent SoC node. The soc node is responsible +for arbitrating all shared register access. diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts index 1868707..c03103c 100644 --- a/arch/powerpc/boot/dts/lite5200.dts +++ b/arch/powerpc/boot/dts/lite5200.dts @@ -1,7 +1,7 @@ /* * Lite5200 board Device Tree Source * - * Copyright 2006 Secret Lab Technologies Ltd. + * Copyright 2006-2007 Secret Lab Technologies Ltd. * Grant Likely * * This program is free software; you can redistribute it and/or modify it @@ -17,8 +17,9 @@ */ / { - model = "Lite5200"; - compatible = "lite5200\0lite52xx\0mpc5200\0mpc52xx"; + model = "fsl,lite5200"; + // revision = "1.0"; + compatible = "fsl,lite5200\0generic-mpc5200"; #address-cells = <1>; #size-cells = <1>; @@ -47,14 +48,17 @@ }; soc5200@f0000000 { + model = "fsl,mpc5200"; + revision = "" // from bootloader #interrupt-cells = <3>; device_type = "soc"; ranges = <0 f0000000 f0010000>; reg = ; bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader cdm@200 { - compatible = "mpc5200-cdm\0mpc52xx-cdm"; + compatible = "mpc5200-cdm"; reg = <200 38>; }; @@ -64,77 +68,86 @@ interrupt-controller; #interrupt-cells = <3>; device_type = "interrupt-controller"; - compatible = "mpc5200-pic\0mpc52xx-pic"; + compatible = "mpc5200-pic"; reg = <500 80>; built-in; }; gpt@600 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <0>; reg = <600 10>; interrupts = <1 9 0>; interrupt-parent = <500>; + has-wdt; }; gpt@610 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <1>; reg = <610 10>; interrupts = <1 a 0>; interrupt-parent = <500>; }; gpt@620 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <2>; reg = <620 10>; interrupts = <1 b 0>; interrupt-parent = <500>; }; gpt@630 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <3>; reg = <630 10>; interrupts = <1 c 0>; interrupt-parent = <500>; }; gpt@640 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <4>; reg = <640 10>; interrupts = <1 d 0>; interrupt-parent = <500>; }; gpt@650 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <5>; reg = <650 10>; interrupts = <1 e 0>; interrupt-parent = <500>; }; gpt@660 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <6>; reg = <660 10>; interrupts = <1 f 0>; interrupt-parent = <500>; }; gpt@670 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <7>; reg = <670 10>; interrupts = <1 10 0>; interrupt-parent = <500>; }; rtc@800 { // Real time clock - compatible = "mpc5200-rtc\0mpc52xx-rtc"; + compatible = "mpc5200-rtc"; device_type = "rtc"; reg = <800 100>; interrupts = <1 5 0 1 6 0>; @@ -143,7 +156,8 @@ mscan@900 { device_type = "mscan"; - compatible = "mpc5200-mscan\0mpc52xx-mscan"; + compatible = "mpc5200-mscan"; + cell-index = <0>; interrupts = <2 11 0>; interrupt-parent = <500>; reg = <900 80>; @@ -151,21 +165,22 @@ mscan@980 { device_type = "mscan"; - compatible = "mpc5200-mscan\0mpc52xx-mscan"; + compatible = "mpc5200-mscan"; + cell-index = <1>; interrupts = <1 12 0>; interrupt-parent = <500>; reg = <980 80>; }; gpio@b00 { - compatible = "mpc5200-gpio\0mpc52xx-gpio"; + compatible = "mpc5200-gpio"; reg = ; interrupts = <1 7 0>; interrupt-parent = <500>; }; gpio-wkup@b00 { - compatible = "mpc5200-gpio-wkup\0mpc52xx-gpio-wkup"; + compatible = "mpc5200-gpio-wkup"; reg = ; interrupts = <1 8 0 0 3 0>; interrupt-parent = <500>; @@ -176,7 +191,7 @@ #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - compatible = "mpc5200-pci\0mpc52xx-pci"; + compatible = "mpc5200-pci"; reg = ; interrupt-map-mask = ; interrupt-map = ; interrupts = <2 d 0 2 e 0>; interrupt-parent = <500>; @@ -202,7 +217,7 @@ usb@1000 { device_type = "usb-ohci-be"; - compatible = "mpc5200-ohci\0mpc52xx-ohci\0ohci-be"; + compatible = "mpc5200-ohci\0ohci-be"; reg = <1000 ff>; interrupts = <2 6 0>; interrupt-parent = <500>; @@ -210,7 +225,7 @@ bestcomm@1200 { device_type = "dma-controller"; - compatible = "mpc5200-bestcomm\0mpc52xx-bestcomm"; + compatible = "mpc5200-bestcomm"; reg = <1200 80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 @@ -220,67 +235,73 @@ }; xlb@1f00 { - compatible = "mpc5200-xlb\0mpc52xx-xlb"; + compatible = "mpc5200-xlb"; reg = <1f00 100>; }; serial@2000 { // PSC1 device_type = "serial"; - compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart"; + compatible = "mpc5200-psc-uart"; port-number = <0>; // Logical port assignment + cell-index = <0>; reg = <2000 100>; interrupts = <2 1 0>; interrupt-parent = <500>; }; - // PSC2 in spi mode example - spi@2200 { // PSC2 - device_type = "spi"; - compatible = "mpc5200-psc-spi\0mpc52xx-psc-spi"; - reg = <2200 100>; - interrupts = <2 2 0>; - interrupt-parent = <500>; - }; + // PSC2 in ac97 mode example + //ac97@2200 { // PSC2 + // device_type = "sound"; + // compatible = "mpc5200-psc-ac97"; + // cell-index = <1>; + // reg = <2200 100>; + // interrupts = <2 2 0>; + // interrupt-parent = <500>; + //}; // PSC3 in CODEC mode example - i2s@2400 { // PSC3 - device_type = "sound"; - compatible = "mpc5200-psc-i2s\0mpc52xx-psc-i2s"; - reg = <2400 100>; - interrupts = <2 3 0>; - interrupt-parent = <500>; - }; + //i2s@2400 { // PSC3 + // device_type = "sound"; + // compatible = "mpc5200-psc-i2s"; + // cell-index = <2>; + // reg = <2400 100>; + // interrupts = <2 3 0>; + // interrupt-parent = <500>; + //}; - // PSC4 unconfigured + // PSC4 in uart mode example //serial@2600 { // PSC4 // device_type = "serial"; - // compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart"; + // compatible = "mpc5200-psc-uart"; + // cell-index = <3>; // reg = <2600 100>; // interrupts = <2 b 0>; // interrupt-parent = <500>; //}; - // PSC5 unconfigured + // PSC5 in uart mode example //serial@2800 { // PSC5 // device_type = "serial"; - // compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart"; + // compatible = "mpc5200-psc-uart"; + // cell-index = <4>; // reg = <2800 100>; // interrupts = <2 c 0>; // interrupt-parent = <500>; //}; - // PSC6 in AC97 mode example - ac97@2c00 { // PSC6 - device_type = "sound"; - compatible = "mpc5200-psc-ac97\0mpc52xx-psc-ac97"; - reg = <2c00 100>; - interrupts = <2 4 0>; - interrupt-parent = <500>; - }; + // PSC6 in spi mode example + //spi@2c00 { // PSC6 + // device_type = "spi"; + // compatible = "mpc5200-psc-spi"; + // cell-index = <5>; + // reg = <2c00 100>; + // interrupts = <2 4 0>; + // interrupt-parent = <500>; + //}; ethernet@3000 { device_type = "network"; - compatible = "mpc5200-fec\0mpc52xx-fec"; + compatible = "mpc5200-fec"; reg = <3000 800>; mac-address = [ 02 03 04 05 06 07 ]; // Bad! interrupts = <2 5 0>; @@ -289,7 +310,7 @@ ata@3a00 { device_type = "ata"; - compatible = "mpc5200-ata\0mpc52xx-ata"; + compatible = "mpc5200-ata"; reg = <3a00 100>; interrupts = <2 7 0>; interrupt-parent = <500>; @@ -297,7 +318,8 @@ i2c@3d00 { device_type = "i2c"; - compatible = "mpc5200-i2c\0mpc52xx-i2c"; + compatible = "mpc5200-i2c"; + cell-index = <0>; reg = <3d00 40>; interrupts = <2 f 0>; interrupt-parent = <500>; @@ -305,14 +327,15 @@ i2c@3d40 { device_type = "i2c"; - compatible = "mpc5200-i2c\0mpc52xx-i2c"; + compatible = "mpc5200-i2c"; + cell-index = <1>; reg = <3d40 40>; interrupts = <2 10 0>; interrupt-parent = <500>; }; sram@8000 { device_type = "sram"; - compatible = "mpc5200-sram\0mpc52xx-sram\0sram"; + compatible = "mpc5200-sram\0sram"; reg = <8000 4000>; }; }; diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index 5bb2760..3875ca9 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -1,7 +1,7 @@ /* * Lite5200B board Device Tree Source * - * Copyright 2006 Secret Lab Technologies Ltd. + * Copyright 2006-2007 Secret Lab Technologies Ltd. * Grant Likely * * This program is free software; you can redistribute it and/or modify it @@ -17,8 +17,9 @@ */ / { - model = "Lite5200b"; - compatible = "lite5200b\0lite52xx\0mpc5200b\0mpc52xx"; + model = "fsl,lite5200b"; + // revision = "1.0"; + compatible = "fsl,lite5200b\0generic-mpc5200"; #address-cells = <1>; #size-cells = <1>; @@ -47,14 +48,17 @@ }; soc5200@f0000000 { + model = "fsl,mpc5200b"; + revision = ""; // from bootloader #interrupt-cells = <3>; device_type = "soc"; ranges = <0 f0000000 f0010000>; reg = ; bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader cdm@200 { - compatible = "mpc5200b-cdm\0mpc52xx-cdm"; + compatible = "mpc5200b-cdm\0mpc5200-cdm"; reg = <200 38>; }; @@ -64,77 +68,86 @@ interrupt-controller; #interrupt-cells = <3>; device_type = "interrupt-controller"; - compatible = "mpc5200b-pic\0mpc52xx-pic"; + compatible = "mpc5200b-pic\0mpc5200-pic"; reg = <500 80>; built-in; }; gpt@600 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <0>; reg = <600 10>; interrupts = <1 9 0>; interrupt-parent = <500>; + has-wdt; }; gpt@610 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <1>; reg = <610 10>; interrupts = <1 a 0>; interrupt-parent = <500>; }; gpt@620 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <2>; reg = <620 10>; interrupts = <1 b 0>; interrupt-parent = <500>; }; gpt@630 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <3>; reg = <630 10>; interrupts = <1 c 0>; interrupt-parent = <500>; }; gpt@640 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <4>; reg = <640 10>; interrupts = <1 d 0>; interrupt-parent = <500>; }; gpt@650 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <5>; reg = <650 10>; interrupts = <1 e 0>; interrupt-parent = <500>; }; gpt@660 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <6>; reg = <660 10>; interrupts = <1 f 0>; interrupt-parent = <500>; }; gpt@670 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <7>; reg = <670 10>; interrupts = <1 10 0>; interrupt-parent = <500>; }; rtc@800 { // Real time clock - compatible = "mpc5200b-rtc\0mpc52xx-rtc"; + compatible = "mpc5200b-rtc\0mpc5200-rtc"; device_type = "rtc"; reg = <800 100>; interrupts = <1 5 0 1 6 0>; @@ -143,7 +156,8 @@ mscan@900 { device_type = "mscan"; - compatible = "mpc5200b-mscan\0mpc52xx-mscan"; + compatible = "mpc5200b-mscan\0mpc5200-mscan"; + cell-index = <0>; interrupts = <2 11 0>; interrupt-parent = <500>; reg = <900 80>; @@ -151,21 +165,22 @@ mscan@980 { device_type = "mscan"; - compatible = "mpc5200b-mscan\0mpc52xx-mscan"; + compatible = "mpc5200b-mscan\0mpc5200-mscan"; + cell-index = <1>; interrupts = <1 12 0>; interrupt-parent = <500>; reg = <980 80>; }; gpio@b00 { - compatible = "mpc5200b-gpio\0mpc52xx-gpio"; + compatible = "mpc5200b-gpio\0mpc5200-gpio"; reg = ; interrupts = <1 7 0>; interrupt-parent = <500>; }; gpio-wkup@b00 { - compatible = "mpc5200b-gpio-wkup\0mpc52xx-gpio-wkup"; + compatible = "mpc5200b-gpio-wkup\0mpc5200-gpio-wkup"; reg = ; interrupts = <1 8 0 0 3 0>; interrupt-parent = <500>; @@ -176,7 +191,7 @@ #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - compatible = "mpc5200b-pci\0mpc52xx-pci"; + compatible = "mpc5200b-pci\0mpc5200-pci"; reg = ; interrupt-map-mask = ; interrupt-map = ; interrupts = <2 d 0 2 e 0>; interrupt-parent = <500>; @@ -207,7 +222,7 @@ usb@1000 { device_type = "usb-ohci-be"; - compatible = "mpc5200b-ohci\0mpc52xx-ohci\0ohci-be"; + compatible = "mpc5200b-ohci\0mpc5200-ohci\0ohci-be"; reg = <1000 ff>; interrupts = <2 6 0>; interrupt-parent = <500>; @@ -215,7 +230,7 @@ bestcomm@1200 { device_type = "dma-controller"; - compatible = "mpc5200b-bestcomm\0mpc52xx-bestcomm"; + compatible = "mpc5200b-bestcomm\0mpc5200-bestcomm"; reg = <1200 80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 @@ -225,67 +240,73 @@ }; xlb@1f00 { - compatible = "mpc5200b-xlb\0mpc52xx-xlb"; + compatible = "mpc5200b-xlb\0mpc5200-xlb"; reg = <1f00 100>; }; serial@2000 { // PSC1 device_type = "serial"; - compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart"; + compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart"; port-number = <0>; // Logical port assignment + cell-index = <0>; reg = <2000 100>; interrupts = <2 1 0>; interrupt-parent = <500>; }; - // PSC2 in spi mode example - spi@2200 { // PSC2 - device_type = "spi"; - compatible = "mpc5200b-psc-spi\0mpc52xx-psc-spi"; - reg = <2200 100>; - interrupts = <2 2 0>; - interrupt-parent = <500>; - }; + // PSC2 in ac97 mode example + //ac97@2200 { // PSC2 + // device_type = "sound"; + // compatible = "mpc5200b-psc-ac97\0mpc5200-psc-ac97"; + // cell-index = <1>; + // reg = <2200 100>; + // interrupts = <2 2 0>; + // interrupt-parent = <500>; + //}; // PSC3 in CODEC mode example - i2s@2400 { // PSC3 - device_type = "sound"; - compatible = "mpc5200b-psc-i2s\0mpc52xx-psc-i2s"; - reg = <2400 100>; - interrupts = <2 3 0>; - interrupt-parent = <500>; - }; + //i2s@2400 { // PSC3 + // device_type = "sound"; + // compatible = "mpc5200b-psc-i2s"; //not 5200 compatible + // cell-index = <2>; + // reg = <2400 100>; + // interrupts = <2 3 0>; + // interrupt-parent = <500>; + //}; - // PSC4 unconfigured + // PSC4 in uart mode example //serial@2600 { // PSC4 // device_type = "serial"; - // compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart"; + // compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart"; + // cell-index = <3>; // reg = <2600 100>; // interrupts = <2 b 0>; // interrupt-parent = <500>; //}; - // PSC5 unconfigured + // PSC5 in uart mode example //serial@2800 { // PSC5 // device_type = "serial"; - // compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart"; + // compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart"; + // cell-index = <4>; // reg = <2800 100>; // interrupts = <2 c 0>; // interrupt-parent = <500>; //}; - // PSC6 in AC97 mode example - ac97@2c00 { // PSC6 - device_type = "sound"; - compatible = "mpc5200b-psc-ac97\0mpc52xx-psc-ac97"; - reg = <2c00 100>; - interrupts = <2 4 0>; - interrupt-parent = <500>; - }; + // PSC6 in spi mode example + //spi@2c00 { // PSC6 + // device_type = "spi"; + // compatible = "mpc5200b-psc-spi\0mpc5200-psc-spi"; + // cell-index = <5>; + // reg = <2c00 100>; + // interrupts = <2 4 0>; + // interrupt-parent = <500>; + //}; ethernet@3000 { device_type = "network"; - compatible = "mpc5200b-fec\0mpc52xx-fec"; + compatible = "mpc5200b-fec\0mpc5200-fec"; reg = <3000 800>; mac-address = [ 02 03 04 05 06 07 ]; // Bad! interrupts = <2 5 0>; @@ -294,7 +315,7 @@ ata@3a00 { device_type = "ata"; - compatible = "mpc5200b-ata\0mpc52xx-ata"; + compatible = "mpc5200b-ata\0mpc5200-ata"; reg = <3a00 100>; interrupts = <2 7 0>; interrupt-parent = <500>; @@ -302,7 +323,8 @@ i2c@3d00 { device_type = "i2c"; - compatible = "mpc5200b-i2c\0mpc52xx-i2c"; + compatible = "mpc5200b-i2c\0mpc5200-i2c"; + cell-index = <0>; reg = <3d00 40>; interrupts = <2 f 0>; interrupt-parent = <500>; @@ -310,14 +332,15 @@ i2c@3d40 { device_type = "i2c"; - compatible = "mpc5200b-i2c\0mpc52xx-i2c"; + compatible = "mpc5200b-i2c\0mpc5200-i2c"; + cell-index = <1>; reg = <3d40 40>; interrupts = <2 10 0>; interrupt-parent = <500>; }; sram@8000 { device_type = "sram"; - compatible = "mpc5200b-sram\0mpc52xx-sram\0sram"; + compatible = "mpc5200b-sram\0mpc5200-sram\0sram"; reg = <8000 4000>; }; }; -- cgit v0.10.2 From 88fd2a9d681f261ebd55a6843a03ea2a1bb9eb39 Mon Sep 17 00:00:00 2001 From: Sylvain Munaut Date: Mon, 12 Feb 2007 23:13:20 +0100 Subject: [POWERPC] Add device tree fixups for the EFIKA We make the efika device tree compliant with the defined bindings (at least compliant enough). This is mostly done by mangling the device_type and compatible properties, but also adding some missing bits. Signed-off-by: Sylvain Munaut Acked-by: Grant Likely Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 520ef42..4fb5938 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -2117,11 +2117,92 @@ static void __init fixup_device_tree_pmac(void) #define fixup_device_tree_pmac() #endif +#ifdef CONFIG_PPC_EFIKA +/* The current fw of the Efika has a device tree needs quite a few + * fixups to be compliant with the mpc52xx bindings. It's currently + * unknown if it will ever be compliant (come on bPlan ...) so we do fixups. + * NOTE that we (barely) tolerate it because the EFIKA was out before + * the bindings were finished, for any new boards -> RTFM ! */ + +struct subst_entry { + char *path; + char *property; + void *value; + int value_len; +}; + +static void __init fixup_device_tree_efika(void) +{ + /* Substitution table */ + #define prop_cstr(x) x, sizeof(x) + int prop_sound_irq[3] = { 2, 2, 0 }; + int prop_bcomm_irq[3*16] = { 3,0,0, 3,1,0, 3,2,0, 3,3,0, + 3,4,0, 3,5,0, 3,6,0, 3,7,0, + 3,8,0, 3,9,0, 3,10,0, 3,11,0, + 3,12,0, 3,13,0, 3,14,0, 3,15,0 }; + struct subst_entry efika_subst_table[] = { + { "/", "device_type", prop_cstr("efika") }, + { "/builtin", "compatible", prop_cstr("soc") }, + { "/builtin/ata", "compatible", prop_cstr("mpc5200b-ata\0mpc5200-ata"), }, + { "/builtin/bestcomm", "compatible", prop_cstr("mpc5200b-bestcomm\0mpc5200-bestcomm") }, + { "/builtin/bestcomm", "interrupts", prop_bcomm_irq, sizeof(prop_bcomm_irq) }, + { "/builtin/ethernet", "compatible", prop_cstr("mpc5200b-fec\0mpc5200-fec") }, + { "/builtin/pic", "compatible", prop_cstr("mpc5200b-pic\0mpc5200-pic") }, + { "/builtin/serial", "compatible", prop_cstr("mpc5200b-psc-uart\0mpc5200-psc-uart") }, + { "/builtin/sound", "compatible", prop_cstr("mpc5200b-psc-ac97\0mpc5200-psc-ac97") }, + { "/builtin/sound", "interrupts", prop_sound_irq, sizeof(prop_sound_irq) }, + { "/builtin/sram", "compatible", prop_cstr("mpc5200b-sram\0mpc5200-sram") }, + { "/builtin/sram", "device_type", prop_cstr("sram") }, + {} + }; + #undef prop_cstr + + /* Vars */ + u32 node; + char prop[64]; + int rv, i; + + /* Check if we're really running on a EFIKA */ + node = call_prom("finddevice", 1, 1, ADDR("/")); + if (!PHANDLE_VALID(node)) + return; + + rv = prom_getprop(node, "model", prop, sizeof(prop)); + if (rv == PROM_ERROR) + return; + if (strcmp(prop, "EFIKA5K2")) + return; + + prom_printf("Applying EFIKA device tree fixups\n"); + + /* Process substitution table */ + for (i=0; efika_subst_table[i].path; i++) { + struct subst_entry *se = &efika_subst_table[i]; + + node = call_prom("finddevice", 1, 1, ADDR(se->path)); + if (!PHANDLE_VALID(node)) { + prom_printf("fixup_device_tree_efika: ", + "skipped entry %x - not found\n", i); + continue; + } + + rv = prom_setprop(node, se->path, se->property, + se->value, se->value_len ); + if (rv == PROM_ERROR) + prom_printf("fixup_device_tree_efika: ", + "skipped entry %x - setprop error\n", i); + } +} +#else +#define fixup_device_tree_efika() +#endif + static void __init fixup_device_tree(void) { fixup_device_tree_maple(); fixup_device_tree_chrp(); fixup_device_tree_pmac(); + fixup_device_tree_efika(); } static void __init prom_find_boot_cpu(void) -- cgit v0.10.2 From b6a591b2c59935eef5dd31790323ca6014e28f01 Mon Sep 17 00:00:00 2001 From: Sylvain Munaut Date: Mon, 12 Feb 2007 23:13:21 +0100 Subject: [POWERPC] Restore 'proper' link order in platform The 52xx was put before CHRP to allow EFIKA to be recognized properly. Now the efika tree is fixed up in prom_init so no need for this ugly hack. So we restore the 'normal' order. Signed-off-by: Sylvain Munaut Acked-by: Grant Likely Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 65e6123..4520042 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -5,9 +5,9 @@ ifeq ($(CONFIG_PPC64),y) obj-$(CONFIG_PPC_PMAC) += powermac/ endif endif -obj-$(CONFIG_PPC_MPC52xx) += 52xx/ obj-$(CONFIG_PPC_CHRP) += chrp/ obj-$(CONFIG_4xx) += 4xx/ +obj-$(CONFIG_PPC_MPC52xx) += 52xx/ obj-$(CONFIG_PPC_8xx) += 8xx/ obj-$(CONFIG_PPC_82xx) += 82xx/ obj-$(CONFIG_PPC_83xx) += 83xx/ -- cgit v0.10.2 From 82a03b92279f2ea80e11dc2c419fdaa3800401a2 Mon Sep 17 00:00:00 2001 From: Sylvain Munaut Date: Mon, 12 Feb 2007 23:13:22 +0100 Subject: [POWERPC] Use common 52xx of_platform probe code for EFIKA Now that the device tree has the good properties, we can remove all the efika_init code by a single call to common code. While we're modifying that file, a few whitespaces/alignement/typo fixes are made (nothing significant). Signed-off-by: Sylvain Munaut Acked-by: Grant Likely Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/platforms/52xx/efika-setup.c b/arch/powerpc/platforms/52xx/efika-setup.c index 110c980..d61ce84 100644 --- a/arch/powerpc/platforms/52xx/efika-setup.c +++ b/arch/powerpc/platforms/52xx/efika-setup.c @@ -2,7 +2,7 @@ * * Efika 5K2 platform setup * Some code really inspired from the lite5200b platform. - * + * * Copyright (C) 2006 bplan GmbH * * This file is licensed under the terms of the GNU General Public License @@ -81,35 +81,7 @@ static void __init efika_setup_arch(void) efika_pcisetup(); if (ppc_md.progress) - ppc_md.progress("Linux/PPC " UTS_RELEASE " runnung on Efika ;-)\n", 0x0); -} - -static void __init efika_init(void) -{ - struct device_node *np; - struct device_node *cnp = NULL; - const u32 *base; - - /* Find every child of the SOC node and add it to of_platform */ - np = of_find_node_by_name(NULL, "builtin"); - if (np) { - char name[BUS_ID_SIZE]; - while ((cnp = of_get_next_child(np, cnp))) { - strcpy(name, cnp->name); - - base = get_property(cnp, "reg", NULL); - if (base == NULL) - continue; - - snprintf(name+strlen(name), BUS_ID_SIZE, "@%x", *base); - of_platform_device_create(cnp, name, NULL); - - printk(KERN_INFO EFIKA_PLATFORM_NAME" : Added %s (type '%s' at '%s') to the known devices\n", name, cnp->type, cnp->full_name); - } - } - - if (ppc_md.progress) - ppc_md.progress(" Have fun with your Efika! ", 0x7777); + ppc_md.progress("Linux/PPC " UTS_RELEASE " running on Efika ;-)\n", 0x0); } static int __init efika_probe(void) @@ -131,20 +103,20 @@ static int __init efika_probe(void) define_machine(efika) { - .name = EFIKA_PLATFORM_NAME, - .probe = efika_probe, - .setup_arch = efika_setup_arch, - .init = efika_init, - .show_cpuinfo = efika_show_cpuinfo, - .init_IRQ = mpc52xx_init_irq, - .get_irq = mpc52xx_get_irq, - .restart = rtas_restart, - .power_off = rtas_power_off, - .halt = rtas_halt, - .set_rtc_time = rtas_set_rtc_time, - .get_rtc_time = rtas_get_rtc_time, - .progress = rtas_progress, - .get_boot_time = rtas_get_boot_time, - .calibrate_decr = generic_calibrate_decr, - .phys_mem_access_prot = pci_phys_mem_access_prot, + .name = EFIKA_PLATFORM_NAME, + .probe = efika_probe, + .setup_arch = efika_setup_arch, + .init = mpc52xx_declare_of_platform_devices, + .show_cpuinfo = efika_show_cpuinfo, + .init_IRQ = mpc52xx_init_irq, + .get_irq = mpc52xx_get_irq, + .restart = rtas_restart, + .power_off = rtas_power_off, + .halt = rtas_halt, + .set_rtc_time = rtas_set_rtc_time, + .get_rtc_time = rtas_get_rtc_time, + .progress = rtas_progress, + .get_boot_time = rtas_get_boot_time, + .calibrate_decr = generic_calibrate_decr, + .phys_mem_access_prot = pci_phys_mem_access_prot, }; -- cgit v0.10.2 From 46e4cf6c14e0a5b8916a1236a7079ccad3f4352a Mon Sep 17 00:00:00 2001 From: Sylvain Munaut Date: Mon, 12 Feb 2007 23:13:23 +0100 Subject: [POWERPC] Fix unbalanced of_node_{get,put} in efika-setup.c Signed-off-by: Sylvain Munaut Acked-by: Grant Likely Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/platforms/52xx/efika-setup.c b/arch/powerpc/platforms/52xx/efika-setup.c index d61ce84..b6945cb 100644 --- a/arch/powerpc/platforms/52xx/efika-setup.c +++ b/arch/powerpc/platforms/52xx/efika-setup.c @@ -42,14 +42,13 @@ static void efika_show_cpuinfo(struct seq_file *m) const char *codegenvendor = NULL; root = of_find_node_by_path("/"); - if (root) { - revision = get_property(root, "revision", NULL); - codegendescription = - get_property(root, "CODEGEN,description", NULL); - codegenvendor = get_property(root, "CODEGEN,vendor", NULL); + if (!root) + return; - of_node_put(root); - } + revision = get_property(root, "revision", NULL); + codegendescription = + get_property(root, "CODEGEN,description", NULL); + codegenvendor = get_property(root, "CODEGEN,vendor", NULL); if (codegendescription) seq_printf(m, "machine\t\t: %s\n", codegendescription); -- cgit v0.10.2 From 9724b86f0706ca9b552d82e013cb0c208b4f5529 Mon Sep 17 00:00:00 2001 From: Sylvain Munaut Date: Mon, 12 Feb 2007 23:13:24 +0100 Subject: [POWERPC] Small cleanup of EFIKA platform The efika platform used three files efika-pci.c efika-setup.c and a 2 line efika.h to link the two. The total of code in those is really not much and therefore, I think they're better merged in a single file. There is absolutely _no_code_change_ at all, just merged the files. Signed-off-by: Sylvain Munaut Acked-by: Grant Likely Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile index 795b713..07cdbca 100644 --- a/arch/powerpc/platforms/52xx/Makefile +++ b/arch/powerpc/platforms/52xx/Makefile @@ -6,5 +6,5 @@ obj-y += mpc52xx_pic.o mpc52xx_common.o obj-$(CONFIG_PCI) += mpc52xx_pci.o endif -obj-$(CONFIG_PPC_EFIKA) += efika-setup.o efika-pci.o +obj-$(CONFIG_PPC_EFIKA) += efika.o obj-$(CONFIG_PPC_LITE5200) += lite5200.o diff --git a/arch/powerpc/platforms/52xx/efika-pci.c b/arch/powerpc/platforms/52xx/efika-pci.c deleted file mode 100644 index 62e05b2..0000000 --- a/arch/powerpc/platforms/52xx/efika-pci.c +++ /dev/null @@ -1,119 +0,0 @@ - -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include "efika.h" - -#ifdef CONFIG_PCI -/* - * Access functions for PCI config space using RTAS calls. - */ -static int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset, - int len, u32 * val) -{ - struct pci_controller *hose = bus->sysdata; - unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) - | (((bus->number - hose->first_busno) & 0xff) << 16) - | (hose->index << 24); - int ret = -1; - int rval; - - rval = rtas_call(rtas_token("read-pci-config"), 2, 2, &ret, addr, len); - *val = ret; - return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -} - -static int rtas_write_config(struct pci_bus *bus, unsigned int devfn, - int offset, int len, u32 val) -{ - struct pci_controller *hose = bus->sysdata; - unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) - | (((bus->number - hose->first_busno) & 0xff) << 16) - | (hose->index << 24); - int rval; - - rval = rtas_call(rtas_token("write-pci-config"), 3, 1, NULL, - addr, len, val); - return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops rtas_pci_ops = { - rtas_read_config, - rtas_write_config -}; - -void __init efika_pcisetup(void) -{ - const int *bus_range; - int len; - struct pci_controller *hose; - struct device_node *root; - struct device_node *pcictrl; - - root = of_find_node_by_path("/"); - if (root == NULL) { - printk(KERN_WARNING EFIKA_PLATFORM_NAME - ": Unable to find the root node\n"); - return; - } - - for (pcictrl = NULL;;) { - pcictrl = of_get_next_child(root, pcictrl); - if ((pcictrl == NULL) || (strcmp(pcictrl->name, "pci") == 0)) - break; - } - - of_node_put(root); - - if (pcictrl == NULL) { - printk(KERN_WARNING EFIKA_PLATFORM_NAME - ": Unable to find the PCI bridge node\n"); - return; - } - - bus_range = get_property(pcictrl, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING EFIKA_PLATFORM_NAME - ": Can't get bus-range for %s\n", pcictrl->full_name); - return; - } - - if (bus_range[1] == bus_range[0]) - printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI bus %d", - bus_range[0]); - else - printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI buses %d..%d", - bus_range[0], bus_range[1]); - printk(" controlled by %s\n", pcictrl->full_name); - printk("\n"); - - hose = pcibios_alloc_controller(); - if (!hose) { - printk(KERN_WARNING EFIKA_PLATFORM_NAME - ": Can't allocate PCI controller structure for %s\n", - pcictrl->full_name); - return; - } - - hose->arch_data = of_node_get(pcictrl); - hose->first_busno = bus_range[0]; - hose->last_busno = bus_range[1]; - hose->ops = &rtas_pci_ops; - - pci_process_bridge_OF_ranges(hose, pcictrl, 0); -} - -#else -void __init efika_pcisetup(void) -{} -#endif diff --git a/arch/powerpc/platforms/52xx/efika-setup.c b/arch/powerpc/platforms/52xx/efika-setup.c deleted file mode 100644 index b6945cb..0000000 --- a/arch/powerpc/platforms/52xx/efika-setup.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * - * Efika 5K2 platform setup - * Some code really inspired from the lite5200b platform. - * - * Copyright (C) 2006 bplan GmbH - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#include "efika.h" - -static void efika_show_cpuinfo(struct seq_file *m) -{ - struct device_node *root; - const char *revision = NULL; - const char *codegendescription = NULL; - const char *codegenvendor = NULL; - - root = of_find_node_by_path("/"); - if (!root) - return; - - revision = get_property(root, "revision", NULL); - codegendescription = - get_property(root, "CODEGEN,description", NULL); - codegenvendor = get_property(root, "CODEGEN,vendor", NULL); - - if (codegendescription) - seq_printf(m, "machine\t\t: %s\n", codegendescription); - else - seq_printf(m, "machine\t\t: Efika\n"); - - if (revision) - seq_printf(m, "revision\t: %s\n", revision); - - if (codegenvendor) - seq_printf(m, "vendor\t\t: %s\n", codegenvendor); - - of_node_put(root); -} - -static void __init efika_setup_arch(void) -{ - rtas_initialize(); - -#ifdef CONFIG_BLK_DEV_INITRD - initrd_below_start_ok = 1; - - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif - ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */ - - efika_pcisetup(); - - if (ppc_md.progress) - ppc_md.progress("Linux/PPC " UTS_RELEASE " running on Efika ;-)\n", 0x0); -} - -static int __init efika_probe(void) -{ - char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), - "model", NULL); - - if (model == NULL) - return 0; - if (strcmp(model, "EFIKA5K2")) - return 0; - - ISA_DMA_THRESHOLD = ~0L; - DMA_MODE_READ = 0x44; - DMA_MODE_WRITE = 0x48; - - return 1; -} - -define_machine(efika) -{ - .name = EFIKA_PLATFORM_NAME, - .probe = efika_probe, - .setup_arch = efika_setup_arch, - .init = mpc52xx_declare_of_platform_devices, - .show_cpuinfo = efika_show_cpuinfo, - .init_IRQ = mpc52xx_init_irq, - .get_irq = mpc52xx_get_irq, - .restart = rtas_restart, - .power_off = rtas_power_off, - .halt = rtas_halt, - .set_rtc_time = rtas_set_rtc_time, - .get_rtc_time = rtas_get_rtc_time, - .progress = rtas_progress, - .get_boot_time = rtas_get_boot_time, - .calibrate_decr = generic_calibrate_decr, - .phys_mem_access_prot = pci_phys_mem_access_prot, -}; diff --git a/arch/powerpc/platforms/52xx/efika.c b/arch/powerpc/platforms/52xx/efika.c new file mode 100644 index 0000000..8de0341 --- /dev/null +++ b/arch/powerpc/platforms/52xx/efika.c @@ -0,0 +1,243 @@ +/* + * Efika 5K2 platform code + * Some code really inspired from the lite5200b platform. + * + * Copyright (C) 2006 bplan GmbH + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#define EFIKA_PLATFORM_NAME "Efika" + + +/* ------------------------------------------------------------------------ */ +/* PCI accesses thru RTAS */ +/* ------------------------------------------------------------------------ */ + +#ifdef CONFIG_PCI + +/* + * Access functions for PCI config space using RTAS calls. + */ +static int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 * val) +{ + struct pci_controller *hose = bus->sysdata; + unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) + | (((bus->number - hose->first_busno) & 0xff) << 16) + | (hose->index << 24); + int ret = -1; + int rval; + + rval = rtas_call(rtas_token("read-pci-config"), 2, 2, &ret, addr, len); + *val = ret; + return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +static int rtas_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose = bus->sysdata; + unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) + | (((bus->number - hose->first_busno) & 0xff) << 16) + | (hose->index << 24); + int rval; + + rval = rtas_call(rtas_token("write-pci-config"), 3, 1, NULL, + addr, len, val); + return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops rtas_pci_ops = { + rtas_read_config, + rtas_write_config +}; + + +void __init efika_pcisetup(void) +{ + const int *bus_range; + int len; + struct pci_controller *hose; + struct device_node *root; + struct device_node *pcictrl; + + root = of_find_node_by_path("/"); + if (root == NULL) { + printk(KERN_WARNING EFIKA_PLATFORM_NAME + ": Unable to find the root node\n"); + return; + } + + for (pcictrl = NULL;;) { + pcictrl = of_get_next_child(root, pcictrl); + if ((pcictrl == NULL) || (strcmp(pcictrl->name, "pci") == 0)) + break; + } + + of_node_put(root); + + if (pcictrl == NULL) { + printk(KERN_WARNING EFIKA_PLATFORM_NAME + ": Unable to find the PCI bridge node\n"); + return; + } + + bus_range = get_property(pcictrl, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING EFIKA_PLATFORM_NAME + ": Can't get bus-range for %s\n", pcictrl->full_name); + return; + } + + if (bus_range[1] == bus_range[0]) + printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI bus %d", + bus_range[0]); + else + printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI buses %d..%d", + bus_range[0], bus_range[1]); + printk(" controlled by %s\n", pcictrl->full_name); + printk("\n"); + + hose = pcibios_alloc_controller(); + if (!hose) { + printk(KERN_WARNING EFIKA_PLATFORM_NAME + ": Can't allocate PCI controller structure for %s\n", + pcictrl->full_name); + return; + } + + hose->arch_data = of_node_get(pcictrl); + hose->first_busno = bus_range[0]; + hose->last_busno = bus_range[1]; + hose->ops = &rtas_pci_ops; + + pci_process_bridge_OF_ranges(hose, pcictrl, 0); +} + +#else +void __init efika_pcisetup(void) +{} +#endif + + + +/* ------------------------------------------------------------------------ */ +/* Platform setup */ +/* ------------------------------------------------------------------------ */ + +static void efika_show_cpuinfo(struct seq_file *m) +{ + struct device_node *root; + const char *revision = NULL; + const char *codegendescription = NULL; + const char *codegenvendor = NULL; + + root = of_find_node_by_path("/"); + if (!root) + return; + + revision = get_property(root, "revision", NULL); + codegendescription = + get_property(root, "CODEGEN,description", NULL); + codegenvendor = get_property(root, "CODEGEN,vendor", NULL); + + if (codegendescription) + seq_printf(m, "machine\t\t: %s\n", codegendescription); + else + seq_printf(m, "machine\t\t: Efika\n"); + + if (revision) + seq_printf(m, "revision\t: %s\n", revision); + + if (codegenvendor) + seq_printf(m, "vendor\t\t: %s\n", codegenvendor); + + of_node_put(root); +} + +static void __init efika_setup_arch(void) +{ + rtas_initialize(); + +#ifdef CONFIG_BLK_DEV_INITRD + initrd_below_start_ok = 1; + + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif + ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */ + + efika_pcisetup(); + + if (ppc_md.progress) + ppc_md.progress("Linux/PPC " UTS_RELEASE " running on Efika ;-)\n", 0x0); +} + +static int __init efika_probe(void) +{ + char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), + "model", NULL); + + if (model == NULL) + return 0; + if (strcmp(model, "EFIKA5K2")) + return 0; + + ISA_DMA_THRESHOLD = ~0L; + DMA_MODE_READ = 0x44; + DMA_MODE_WRITE = 0x48; + + return 1; +} + +define_machine(efika) +{ + .name = EFIKA_PLATFORM_NAME, + .probe = efika_probe, + .setup_arch = efika_setup_arch, + .init = mpc52xx_declare_of_platform_devices, + .show_cpuinfo = efika_show_cpuinfo, + .init_IRQ = mpc52xx_init_irq, + .get_irq = mpc52xx_get_irq, + .restart = rtas_restart, + .power_off = rtas_power_off, + .halt = rtas_halt, + .set_rtc_time = rtas_set_rtc_time, + .get_rtc_time = rtas_get_rtc_time, + .progress = rtas_progress, + .get_boot_time = rtas_get_boot_time, + .calibrate_decr = generic_calibrate_decr, + .phys_mem_access_prot = pci_phys_mem_access_prot, +}; + diff --git a/arch/powerpc/platforms/52xx/efika.h b/arch/powerpc/platforms/52xx/efika.h deleted file mode 100644 index 2f060fd..0000000 --- a/arch/powerpc/platforms/52xx/efika.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Efika 5K2 platform setup - Header file - * - * Copyright (C) 2006 bplan GmbH - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - * - */ - -#ifndef __ARCH_POWERPC_EFIKA__ -#define __ARCH_POWERPC_EFIKA__ - -#define EFIKA_PLATFORM_NAME "Efika" - -extern void __init efika_pcisetup(void); - -#endif -- cgit v0.10.2 From 78bde53e351bc89cff85d1c2c7e6d7c2ffdf120d Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 13 Feb 2007 11:46:06 +1100 Subject: [POWERPC] spufs: remove need for struct page for SPEs This patch removes the need for struct page for SPE local store and registers from spufs. It also makes the locking much more obvious and no longer relying on the truncate logic black magic for protecting against races between unmap_mapping_range() and new pages faulted in. It does so by switching to a nopfn() handler and using the new vm_insert_pfn() to setup the PTEs itself while holding a lock on the SPE. The nice thing is that this patch actually removes a lot more code than it adds :-) Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 0088c5e..340d9be 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -876,7 +876,7 @@ config ARCH_SPARSEMEM_ENABLE config ARCH_SPARSEMEM_DEFAULT def_bool y - depends on (SMP && PPC_PSERIES) || PPC_CELL + depends on (SMP && PPC_PSERIES) || PPC_PS3 config ARCH_POPULATES_NODE_MAP def_bool y diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c index d8b39fe..e34599f 100644 --- a/arch/powerpc/platforms/cell/spu_manage.c +++ b/arch/powerpc/platforms/cell/spu_manage.c @@ -59,63 +59,6 @@ static u64 __init find_spu_unit_number(struct device_node *spe) return 0; } -static int __init cell_spuprop_present(struct spu *spu, struct device_node *spe, - const char *prop) -{ - const struct address_prop { - unsigned long address; - unsigned int len; - } __attribute__((packed)) *p; - int proplen; - - unsigned long start_pfn, nr_pages; - struct pglist_data *pgdata; - struct zone *zone; - int ret; - - p = get_property(spe, prop, &proplen); - WARN_ON(proplen != sizeof (*p)); - - start_pfn = p->address >> PAGE_SHIFT; - nr_pages = ((unsigned long)p->len + PAGE_SIZE - 1) >> PAGE_SHIFT; - - pgdata = NODE_DATA(spu->node); - zone = pgdata->node_zones; - - ret = __add_pages(zone, start_pfn, nr_pages); - - return ret; -} - -static void __iomem * __init map_spe_prop(struct spu *spu, - struct device_node *n, const char *name) -{ - const struct address_prop { - unsigned long address; - unsigned int len; - } __attribute__((packed)) *prop; - - const void *p; - int proplen; - void __iomem *ret = NULL; - int err = 0; - - p = get_property(n, name, &proplen); - if (proplen != sizeof (struct address_prop)) - return NULL; - - prop = p; - - err = cell_spuprop_present(spu, n, name); - if (err && (err != -EEXIST)) - goto out; - - ret = ioremap(prop->address, prop->len); - - out: - return ret; -} - static void spu_unmap(struct spu *spu) { if (!firmware_has_feature(FW_FEATURE_LPAR)) @@ -157,6 +100,23 @@ static int __init spu_map_interrupts_old(struct spu *spu, return spu->irqs[2] == NO_IRQ ? -EINVAL : 0; } +static void __iomem * __init spu_map_prop_old(struct spu *spu, + struct device_node *n, + const char *name) +{ + const struct address_prop { + unsigned long address; + unsigned int len; + } __attribute__((packed)) *prop; + int proplen; + + prop = get_property(n, name, &proplen); + if (prop == NULL || proplen != sizeof (struct address_prop)) + return NULL; + + return ioremap(prop->address, prop->len); +} + static int __init spu_map_device_old(struct spu *spu) { struct device_node *node = spu->devnode; @@ -175,7 +135,7 @@ static int __init spu_map_device_old(struct spu *spu) /* we use local store as ram, not io memory */ spu->local_store = (void __force *) - map_spe_prop(spu, node, "local-store"); + spu_map_prop_old(spu, node, "local-store"); if (!spu->local_store) goto out; @@ -184,16 +144,16 @@ static int __init spu_map_device_old(struct spu *spu) goto out_unmap; spu->problem_phys = *(unsigned long *)prop; - spu->problem = map_spe_prop(spu, node, "problem"); + spu->problem = spu_map_prop_old(spu, node, "problem"); if (!spu->problem) goto out_unmap; - spu->priv2 = map_spe_prop(spu, node, "priv2"); + spu->priv2 = spu_map_prop_old(spu, node, "priv2"); if (!spu->priv2) goto out_unmap; if (!firmware_has_feature(FW_FEATURE_LPAR)) { - spu->priv1 = map_spe_prop(spu, node, "priv1"); + spu->priv1 = spu_map_prop_old(spu, node, "priv1"); if (!spu->priv1) goto out_unmap; } @@ -245,34 +205,20 @@ static int spu_map_resource(struct spu *spu, int nr, void __iomem** virt, unsigned long *phys) { struct device_node *np = spu->devnode; - unsigned long start_pfn, nr_pages; - struct pglist_data *pgdata; - struct zone *zone; struct resource resource = { }; unsigned long len; int ret; ret = of_address_to_resource(np, nr, &resource); if (ret) - goto out; - + return ret; if (phys) *phys = resource.start; len = resource.end - resource.start + 1; *virt = ioremap(resource.start, len); if (!*virt) - ret = -EINVAL; - - start_pfn = resource.start >> PAGE_SHIFT; - nr_pages = (len + PAGE_SIZE - 1) >> PAGE_SHIFT; - - pgdata = NODE_DATA(spu->node); - zone = pgdata->node_zones; - - ret = __add_pages(zone, start_pfn, nr_pages); - -out: - return ret; + return -EINVAL; + return 0; } static int __init spu_map_device(struct spu *spu) diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index af9e945..7fb9a6d 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -95,14 +95,12 @@ spufs_mem_write(struct file *file, const char __user *buffer, return ret; } -static struct page * -spufs_mem_mmap_nopage(struct vm_area_struct *vma, - unsigned long address, int *type) +static unsigned long spufs_mem_mmap_nopfn(struct vm_area_struct *vma, + unsigned long address) { - struct page *page = NOPAGE_SIGBUS; - struct spu_context *ctx = vma->vm_file->private_data; - unsigned long offset = address - vma->vm_start; + unsigned long pfn, offset = address - vma->vm_start; + offset += vma->vm_pgoff << PAGE_SHIFT; spu_acquire(ctx); @@ -110,24 +108,22 @@ spufs_mem_mmap_nopage(struct vm_area_struct *vma, if (ctx->state == SPU_STATE_SAVED) { vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) & ~_PAGE_NO_CACHE); - page = vmalloc_to_page(ctx->csa.lscsa->ls + offset); + pfn = vmalloc_to_pfn(ctx->csa.lscsa->ls + offset); } else { vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) - | _PAGE_NO_CACHE); - page = pfn_to_page((ctx->spu->local_store_phys + offset) - >> PAGE_SHIFT); + | _PAGE_NO_CACHE); + pfn = (ctx->spu->local_store_phys + offset) >> PAGE_SHIFT; } - spu_release(ctx); + vm_insert_pfn(vma, address, pfn); - if (type) - *type = VM_FAULT_MINOR; + spu_release(ctx); - page_cache_get(page); - return page; + return NOPFN_REFAULT; } + static struct vm_operations_struct spufs_mem_mmap_vmops = { - .nopage = spufs_mem_mmap_nopage, + .nopfn = spufs_mem_mmap_nopfn, }; static int @@ -136,7 +132,7 @@ spufs_mem_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_IO | VM_PFNMAP; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE); @@ -152,49 +148,42 @@ static const struct file_operations spufs_mem_fops = { .mmap = spufs_mem_mmap, }; -static struct page *spufs_ps_nopage(struct vm_area_struct *vma, +static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma, unsigned long address, - int *type, unsigned long ps_offs, + unsigned long ps_offs, unsigned long ps_size) { - struct page *page = NOPAGE_SIGBUS; - int fault_type = VM_FAULT_SIGBUS; struct spu_context *ctx = vma->vm_file->private_data; - unsigned long offset = address - vma->vm_start; - unsigned long area; + unsigned long area, offset = address - vma->vm_start; int ret; offset += vma->vm_pgoff << PAGE_SHIFT; if (offset >= ps_size) - goto out; + return NOPFN_SIGBUS; + /* error here usually means a signal.. we might want to test + * the error code more precisely though + */ ret = spu_acquire_runnable(ctx); if (ret) - goto out; + return NOPFN_REFAULT; area = ctx->spu->problem_phys + ps_offs; - page = pfn_to_page((area + offset) >> PAGE_SHIFT); - fault_type = VM_FAULT_MINOR; - page_cache_get(page); - + vm_insert_pfn(vma, address, (area + offset) >> PAGE_SHIFT); spu_release(ctx); - out: - if (type) - *type = fault_type; - - return page; + return NOPFN_REFAULT; } #if SPUFS_MMAP_4K -static struct page *spufs_cntl_mmap_nopage(struct vm_area_struct *vma, - unsigned long address, int *type) +static unsigned long spufs_cntl_mmap_nopfn(struct vm_area_struct *vma, + unsigned long address) { - return spufs_ps_nopage(vma, address, type, 0x4000, 0x1000); + return spufs_ps_nopfn(vma, address, 0x4000, 0x1000); } static struct vm_operations_struct spufs_cntl_mmap_vmops = { - .nopage = spufs_cntl_mmap_nopage, + .nopfn = spufs_cntl_mmap_nopfn, }; /* @@ -205,7 +194,7 @@ static int spufs_cntl_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_IO | VM_PFNMAP; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE | _PAGE_GUARDED); @@ -791,23 +780,23 @@ static ssize_t spufs_signal1_write(struct file *file, const char __user *buf, return 4; } -static struct page *spufs_signal1_mmap_nopage(struct vm_area_struct *vma, - unsigned long address, int *type) +static unsigned long spufs_signal1_mmap_nopfn(struct vm_area_struct *vma, + unsigned long address) { #if PAGE_SIZE == 0x1000 - return spufs_ps_nopage(vma, address, type, 0x14000, 0x1000); + return spufs_ps_nopfn(vma, address, 0x14000, 0x1000); #elif PAGE_SIZE == 0x10000 /* For 64k pages, both signal1 and signal2 can be used to mmap the whole * signal 1 and 2 area */ - return spufs_ps_nopage(vma, address, type, 0x10000, 0x10000); + return spufs_ps_nopfn(vma, address, 0x10000, 0x10000); #else #error unsupported page size #endif } static struct vm_operations_struct spufs_signal1_mmap_vmops = { - .nopage = spufs_signal1_mmap_nopage, + .nopfn = spufs_signal1_mmap_nopfn, }; static int spufs_signal1_mmap(struct file *file, struct vm_area_struct *vma) @@ -815,7 +804,7 @@ static int spufs_signal1_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_IO | VM_PFNMAP; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE | _PAGE_GUARDED); @@ -899,23 +888,23 @@ static ssize_t spufs_signal2_write(struct file *file, const char __user *buf, } #if SPUFS_MMAP_4K -static struct page *spufs_signal2_mmap_nopage(struct vm_area_struct *vma, - unsigned long address, int *type) +static unsigned long spufs_signal2_mmap_nopfn(struct vm_area_struct *vma, + unsigned long address) { #if PAGE_SIZE == 0x1000 - return spufs_ps_nopage(vma, address, type, 0x1c000, 0x1000); + return spufs_ps_nopfn(vma, address, 0x1c000, 0x1000); #elif PAGE_SIZE == 0x10000 /* For 64k pages, both signal1 and signal2 can be used to mmap the whole * signal 1 and 2 area */ - return spufs_ps_nopage(vma, address, type, 0x10000, 0x10000); + return spufs_ps_nopfn(vma, address, 0x10000, 0x10000); #else #error unsupported page size #endif } static struct vm_operations_struct spufs_signal2_mmap_vmops = { - .nopage = spufs_signal2_mmap_nopage, + .nopfn = spufs_signal2_mmap_nopfn, }; static int spufs_signal2_mmap(struct file *file, struct vm_area_struct *vma) @@ -923,7 +912,7 @@ static int spufs_signal2_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_IO | VM_PFNMAP; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE | _PAGE_GUARDED); @@ -1000,14 +989,14 @@ DEFINE_SIMPLE_ATTRIBUTE(spufs_signal2_type, spufs_signal2_type_get, spufs_signal2_type_set, "%llu"); #if SPUFS_MMAP_4K -static struct page *spufs_mss_mmap_nopage(struct vm_area_struct *vma, - unsigned long address, int *type) +static unsigned long spufs_mss_mmap_nopfn(struct vm_area_struct *vma, + unsigned long address) { - return spufs_ps_nopage(vma, address, type, 0x0000, 0x1000); + return spufs_ps_nopfn(vma, address, 0x0000, 0x1000); } static struct vm_operations_struct spufs_mss_mmap_vmops = { - .nopage = spufs_mss_mmap_nopage, + .nopfn = spufs_mss_mmap_nopfn, }; /* @@ -1018,7 +1007,7 @@ static int spufs_mss_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_IO | VM_PFNMAP; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE | _PAGE_GUARDED); @@ -1042,14 +1031,14 @@ static const struct file_operations spufs_mss_fops = { .mmap = spufs_mss_mmap, }; -static struct page *spufs_psmap_mmap_nopage(struct vm_area_struct *vma, - unsigned long address, int *type) +static unsigned long spufs_psmap_mmap_nopfn(struct vm_area_struct *vma, + unsigned long address) { - return spufs_ps_nopage(vma, address, type, 0x0000, 0x20000); + return spufs_ps_nopfn(vma, address, 0x0000, 0x20000); } static struct vm_operations_struct spufs_psmap_mmap_vmops = { - .nopage = spufs_psmap_mmap_nopage, + .nopfn = spufs_psmap_mmap_nopfn, }; /* @@ -1060,7 +1049,7 @@ static int spufs_psmap_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_IO | VM_PFNMAP; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE | _PAGE_GUARDED); @@ -1083,14 +1072,14 @@ static const struct file_operations spufs_psmap_fops = { #if SPUFS_MMAP_4K -static struct page *spufs_mfc_mmap_nopage(struct vm_area_struct *vma, - unsigned long address, int *type) +static unsigned long spufs_mfc_mmap_nopfn(struct vm_area_struct *vma, + unsigned long address) { - return spufs_ps_nopage(vma, address, type, 0x3000, 0x1000); + return spufs_ps_nopfn(vma, address, 0x3000, 0x1000); } static struct vm_operations_struct spufs_mfc_mmap_vmops = { - .nopage = spufs_mfc_mmap_nopage, + .nopfn = spufs_mfc_mmap_nopfn, }; /* @@ -1101,7 +1090,7 @@ static int spufs_mfc_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_IO | VM_PFNMAP; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE | _PAGE_GUARDED); -- cgit v0.10.2 From 44430e0d3916ab6aaf0451fdb811f4f1803b741e Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 13 Feb 2007 11:46:07 +1100 Subject: [POWERPC] powerpc: Remove SPU struct pages for PS3 Struct page are no longer needed for SPUs, so let's not create them on PS3 anymore. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c index d192972..a397e4e 100644 --- a/arch/powerpc/platforms/ps3/spu.c +++ b/arch/powerpc/platforms/ps3/spu.c @@ -170,31 +170,6 @@ static int __init construct_spu(struct spu *spu) return result; } -static int __init add_spu_pages(unsigned long start_addr, unsigned long size) -{ - int result; - unsigned long start_pfn; - unsigned long nr_pages; - struct pglist_data *pgdata; - struct zone *zone; - - BUG_ON(!mem_init_done); - - start_pfn = start_addr >> PAGE_SHIFT; - nr_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; - - pgdata = NODE_DATA(0); - zone = pgdata->node_zones; - - result = __add_pages(zone, start_pfn, nr_pages); - - if (result) - pr_debug("%s:%d: __add_pages failed: (%d)\n", - __func__, __LINE__, result); - - return result; -} - static void spu_unmap(struct spu *spu) { iounmap(spu->priv2); @@ -206,19 +181,6 @@ static void spu_unmap(struct spu *spu) static int __init setup_areas(struct spu *spu) { struct table {char* name; unsigned long addr; unsigned long size;}; - int result; - - /* setup pages */ - - result = add_spu_pages(spu->local_store_phys, LS_SIZE); - if (result) - goto fail_add; - - result = add_spu_pages(spu->problem_phys, sizeof(struct spu_problem)); - if (result) - goto fail_add; - - /* ioremap */ spu_pdata(spu)->shadow = __ioremap( spu_pdata(spu)->shadow_addr, sizeof(struct spe_shadow), @@ -260,8 +222,8 @@ static int __init setup_areas(struct spu *spu) fail_ioremap: spu_unmap(spu); -fail_add: - return result; + + return -ENOMEM; } static int __init setup_interrupts(struct spu *spu) -- cgit v0.10.2 From 17e0e27020d028a790d97699aff85a43af5be472 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 13 Feb 2007 11:46:08 +1100 Subject: [POWERPC] spufs: Fix bitrot of the SPU mmap facility It looks like we've had some serious bitrot there mostly due to tracking of address_space's of mmap'ed files getting out of sync with the actual mmap code. The mfc, mss and psmap were not tracked properly and thus not invalidated on context switches (oops !) I also removed the various file->f_mapping = inode->i_mapping; assignments that were done in the other open() routines since that is already done for us by __dentry_open. One improvement we might want to do later is to assign the various ctx-> fields at mmap time instead of file open/close time so that we don't call unmap_mapping_range() on thing that have not been mmap'ed Finally, I added some smp_wmb's after assigning the ctx-> fields to make sure they are visible to other CPUs. I don't think this is really necessary as I suspect locking in the fs layer will make that happen anyway but better safe than sorry. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index 0870009..28c718c 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -111,13 +111,17 @@ void spu_unmap_mappings(struct spu_context *ctx) if (ctx->local_store) unmap_mapping_range(ctx->local_store, 0, LS_SIZE, 1); if (ctx->mfc) - unmap_mapping_range(ctx->mfc, 0, 0x4000, 1); + unmap_mapping_range(ctx->mfc, 0, 0x1000, 1); if (ctx->cntl) - unmap_mapping_range(ctx->cntl, 0, 0x4000, 1); + unmap_mapping_range(ctx->cntl, 0, 0x1000, 1); if (ctx->signal1) - unmap_mapping_range(ctx->signal1, 0, 0x4000, 1); + unmap_mapping_range(ctx->signal1, 0, PAGE_SIZE, 1); if (ctx->signal2) - unmap_mapping_range(ctx->signal2, 0, 0x4000, 1); + unmap_mapping_range(ctx->signal2, 0, PAGE_SIZE, 1); + if (ctx->mss) + unmap_mapping_range(ctx->mss, 0, 0x1000, 1); + if (ctx->psmap) + unmap_mapping_range(ctx->psmap, 0, 0x20000, 1); } int spu_acquire_exclusive(struct spu_context *ctx) diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 7fb9a6d..a528020 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -45,8 +45,8 @@ spufs_mem_open(struct inode *inode, struct file *file) struct spufs_inode_info *i = SPUFS_I(inode); struct spu_context *ctx = i->i_ctx; file->private_data = ctx; - file->f_mapping = inode->i_mapping; ctx->local_store = inode->i_mapping; + smp_wmb(); return 0; } @@ -232,8 +232,8 @@ static int spufs_cntl_open(struct inode *inode, struct file *file) struct spu_context *ctx = i->i_ctx; file->private_data = ctx; - file->f_mapping = inode->i_mapping; ctx->cntl = inode->i_mapping; + smp_wmb(); return simple_attr_open(inode, file, spufs_cntl_get, spufs_cntl_set, "0x%08lx"); } @@ -717,8 +717,8 @@ static int spufs_signal1_open(struct inode *inode, struct file *file) struct spufs_inode_info *i = SPUFS_I(inode); struct spu_context *ctx = i->i_ctx; file->private_data = ctx; - file->f_mapping = inode->i_mapping; ctx->signal1 = inode->i_mapping; + smp_wmb(); return nonseekable_open(inode, file); } @@ -824,8 +824,8 @@ static int spufs_signal2_open(struct inode *inode, struct file *file) struct spufs_inode_info *i = SPUFS_I(inode); struct spu_context *ctx = i->i_ctx; file->private_data = ctx; - file->f_mapping = inode->i_mapping; ctx->signal2 = inode->i_mapping; + smp_wmb(); return nonseekable_open(inode, file); } @@ -1021,8 +1021,11 @@ static int spufs_mss_mmap(struct file *file, struct vm_area_struct *vma) static int spufs_mss_open(struct inode *inode, struct file *file) { struct spufs_inode_info *i = SPUFS_I(inode); + struct spu_context *ctx = i->i_ctx; file->private_data = i->i_ctx; + ctx->mss = inode->i_mapping; + smp_wmb(); return nonseekable_open(inode, file); } @@ -1060,8 +1063,11 @@ static int spufs_psmap_mmap(struct file *file, struct vm_area_struct *vma) static int spufs_psmap_open(struct inode *inode, struct file *file) { struct spufs_inode_info *i = SPUFS_I(inode); + struct spu_context *ctx = i->i_ctx; file->private_data = i->i_ctx; + ctx->psmap = inode->i_mapping; + smp_wmb(); return nonseekable_open(inode, file); } @@ -1114,6 +1120,8 @@ static int spufs_mfc_open(struct inode *inode, struct file *file) return -EBUSY; file->private_data = ctx; + ctx->mfc = inode->i_mapping; + smp_wmb(); return nonseekable_open(inode, file); } diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 5686446..0941c56 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -51,6 +51,8 @@ struct spu_context { struct address_space *cntl; /* 'control' area mappings. */ struct address_space *signal1; /* 'signal1' area mappings. */ struct address_space *signal2; /* 'signal2' area mappings. */ + struct address_space *mss; /* 'mss' area mappings. */ + struct address_space *psmap; /* 'psmap' area mappings. */ u64 object_id; /* user space pointer for oprofile */ enum { SPU_STATE_RUNNABLE, SPU_STATE_SAVED } state; -- cgit v0.10.2 From 3e7d950a528454ad749a264feef3c8bad3faa108 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 5 Feb 2007 14:26:28 -0800 Subject: NFS: Fix a wraparound issue with nfsi->cache_change_attribute Fix wraparound issue with nfsi->cache_change_attribute. If it is found to lie in the future, then update it to lie in the past. Patch based on a suggestion by Neil Brown. ..and minor micro-optimisation: avoid reading 'jiffies' more than once in nfs_update_inode(). Signed-off-by: Trond Myklebust diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index 4ef4547..93269c3 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -939,6 +939,7 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr) struct nfs_inode *nfsi = NFS_I(inode); loff_t cur_isize, new_isize; unsigned int invalid = 0; + unsigned long now = jiffies; int data_stable; dfprintk(VFS, "NFS: %s(%s/%ld ct=%d info=0x%x)\n", @@ -964,7 +965,11 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr) * Update the read time so we don't revalidate too often. */ nfsi->read_cache_jiffies = fattr->time_start; - nfsi->last_updated = jiffies; + nfsi->last_updated = now; + + /* Fix a wraparound issue with nfsi->cache_change_attribute */ + if (time_before(now, nfsi->cache_change_attribute)) + nfsi->cache_change_attribute = now - 600*HZ; /* Are we racing with known updates of the metadata on the server? */ data_stable = nfs_verify_change_attribute(inode, fattr->time_start); @@ -990,7 +995,7 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr) inode->i_size = new_isize; invalid |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_DATA; } - nfsi->cache_change_attribute = jiffies; + nfsi->cache_change_attribute = now; dprintk("NFS: isize change on server for file %s/%ld\n", inode->i_sb->s_id, inode->i_ino); } @@ -1001,14 +1006,14 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr) dprintk("NFS: mtime change on server for file %s/%ld\n", inode->i_sb->s_id, inode->i_ino); invalid |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_DATA; - nfsi->cache_change_attribute = jiffies; + nfsi->cache_change_attribute = now; } /* If ctime has changed we should definitely clear access+acl caches */ if (!timespec_equal(&inode->i_ctime, &fattr->ctime)) { invalid |= NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL; memcpy(&inode->i_ctime, &fattr->ctime, sizeof(inode->i_ctime)); - nfsi->cache_change_attribute = jiffies; + nfsi->cache_change_attribute = now; } memcpy(&inode->i_atime, &fattr->atime, sizeof(inode->i_atime)); @@ -1037,18 +1042,18 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr) inode->i_sb->s_id, inode->i_ino); nfsi->change_attr = fattr->change_attr; invalid |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_DATA|NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL; - nfsi->cache_change_attribute = jiffies; + nfsi->cache_change_attribute = now; } /* Update attrtimeo value if we're out of the unstable period */ if (invalid & NFS_INO_INVALID_ATTR) { nfs_inc_stats(inode, NFSIOS_ATTRINVALIDATE); nfsi->attrtimeo = NFS_MINATTRTIMEO(inode); - nfsi->attrtimeo_timestamp = jiffies; - } else if (time_after(jiffies, nfsi->attrtimeo_timestamp+nfsi->attrtimeo)) { + nfsi->attrtimeo_timestamp = now; + } else if (time_after(now, nfsi->attrtimeo_timestamp+nfsi->attrtimeo)) { if ((nfsi->attrtimeo <<= 1) > NFS_MAXATTRTIMEO(inode)) nfsi->attrtimeo = NFS_MAXATTRTIMEO(inode); - nfsi->attrtimeo_timestamp = jiffies; + nfsi->attrtimeo_timestamp = now; } /* Don't invalidate the data if we were to blame */ if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) -- cgit v0.10.2 From b0c4fddca2bc3967381b728732a8850de35e1b20 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 5 Feb 2007 14:44:22 -0800 Subject: NFS: Cleanup - avoid rereading 'jiffies' more than once in the same routine Micro-optimisations for nfs_fhget() and nfs_wcc_update_inode(). Signed-off-by: Trond Myklebust diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index 93269c3..af53c02 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -240,6 +240,7 @@ nfs_fhget(struct super_block *sb, struct nfs_fh *fh, struct nfs_fattr *fattr) if (inode->i_state & I_NEW) { struct nfs_inode *nfsi = NFS_I(inode); + unsigned long now = jiffies; /* We set i_ino for the few things that still rely on it, * such as stat(2) */ @@ -276,7 +277,8 @@ nfs_fhget(struct super_block *sb, struct nfs_fh *fh, struct nfs_fattr *fattr) init_special_inode(inode, inode->i_mode, fattr->rdev); nfsi->read_cache_jiffies = fattr->time_start; - nfsi->last_updated = jiffies; + nfsi->last_updated = now; + nfsi->cache_change_attribute = now; inode->i_atime = fattr->atime; inode->i_mtime = fattr->mtime; inode->i_ctime = fattr->ctime; @@ -295,7 +297,7 @@ nfs_fhget(struct super_block *sb, struct nfs_fh *fh, struct nfs_fattr *fattr) inode->i_blocks = fattr->du.nfs2.blocks; } nfsi->attrtimeo = NFS_MINATTRTIMEO(inode); - nfsi->attrtimeo_timestamp = jiffies; + nfsi->attrtimeo_timestamp = now; memset(nfsi->cookieverf, 0, sizeof(nfsi->cookieverf)); nfsi->access_cache = RB_ROOT; @@ -788,20 +790,21 @@ void nfs_end_data_update(struct inode *inode) static void nfs_wcc_update_inode(struct inode *inode, struct nfs_fattr *fattr) { struct nfs_inode *nfsi = NFS_I(inode); + unsigned long now = jiffies; /* If we have atomic WCC data, we may update some attributes */ if ((fattr->valid & NFS_ATTR_WCC) != 0) { if (timespec_equal(&inode->i_ctime, &fattr->pre_ctime)) { memcpy(&inode->i_ctime, &fattr->ctime, sizeof(inode->i_ctime)); - nfsi->cache_change_attribute = jiffies; + nfsi->cache_change_attribute = now; } if (timespec_equal(&inode->i_mtime, &fattr->pre_mtime)) { memcpy(&inode->i_mtime, &fattr->mtime, sizeof(inode->i_mtime)); - nfsi->cache_change_attribute = jiffies; + nfsi->cache_change_attribute = now; } if (inode->i_size == fattr->pre_size && nfsi->npages == 0) { inode->i_size = fattr->size; - nfsi->cache_change_attribute = jiffies; + nfsi->cache_change_attribute = now; } } } @@ -1132,7 +1135,6 @@ struct inode *nfs_alloc_inode(struct super_block *sb) return NULL; nfsi->flags = 0UL; nfsi->cache_validity = 0UL; - nfsi->cache_change_attribute = jiffies; #ifdef CONFIG_NFS_V3_ACL nfsi->acl_access = ERR_PTR(-EAGAIN); nfsi->acl_default = ERR_PTR(-EAGAIN); -- cgit v0.10.2 From a301b777714087ea1d63dbec0173a13d416cd7a9 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 6 Feb 2007 11:07:15 -0800 Subject: NFS: Don't use ClearPageUptodate() when writeback fails ClearPageUptodate() will just cause races here. What we really want to do is to invalidate the page cache. Signed-off-by: Trond Myklebust diff --git a/fs/nfs/write.c b/fs/nfs/write.c index dea1737..febdade 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -153,6 +153,13 @@ static void nfs_grow_file(struct page *page, unsigned int offset, unsigned int c i_size_write(inode, end); } +/* A writeback failed: mark the page as bad, and invalidate the page cache */ +static void nfs_set_pageerror(struct page *page) +{ + SetPageError(page); + nfs_zap_mapping(page->mapping->host, page->mapping); +} + /* We can set the PG_uptodate flag if we see that a write request * covers the full page. */ @@ -714,7 +721,7 @@ int nfs_updatepage(struct file *file, struct page *page, dprintk("NFS: nfs_updatepage returns %d (isize %Ld)\n", status, (long long)i_size_read(inode)); if (status < 0) - ClearPageUptodate(page); + nfs_set_pageerror(page); return status; } @@ -976,8 +983,7 @@ static void nfs_writeback_done_partial(struct rpc_task *task, void *calldata) return; if (task->tk_status < 0) { - ClearPageUptodate(page); - SetPageError(page); + nfs_set_pageerror(page); req->wb_context->error = task->tk_status; dprintk(", error = %d\n", task->tk_status); } else { @@ -1034,8 +1040,7 @@ static void nfs_writeback_done_full(struct rpc_task *task, void *calldata) (long long)req_offset(req)); if (task->tk_status < 0) { - ClearPageUptodate(page); - SetPageError(page); + nfs_set_pageerror(page); req->wb_context->error = task->tk_status; end_page_writeback(page); nfs_inode_remove_request(req); -- cgit v0.10.2 From 43d78ef2ba5bec26d0315859e8324bfc0be23766 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Tue, 6 Feb 2007 18:26:11 -0500 Subject: NFS: disconnect before retrying NFSv4 requests over TCP RFC3530 section 3.1.1 states an NFSv4 client MUST NOT send a request twice on the same connection unless it is the NULL procedure. Section 3.1.1 suggests that the client should disconnect and reconnect if it wants to retry a request. Implement this by adding an rpc_clnt flag that an ULP can use to specify that the underlying transport should be disconnected on a major timeout. The NFSv4 client asserts this new flag, and requests no retries after a minor retransmit timeout. Note that disconnecting on a retransmit is in general not safe to do if the RPC client does not reuse the TCP port number when reconnecting. See http://bugzilla.linux-nfs.org/show_bug.cgi?id=6 Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust diff --git a/fs/nfs/client.c b/fs/nfs/client.c index a3191f0..c46e94f 100644 --- a/fs/nfs/client.c +++ b/fs/nfs/client.c @@ -394,7 +394,8 @@ static void nfs_init_timeout_values(struct rpc_timeout *to, int proto, static int nfs_create_rpc_client(struct nfs_client *clp, int proto, unsigned int timeo, unsigned int retrans, - rpc_authflavor_t flavor) + rpc_authflavor_t flavor, + int flags) { struct rpc_timeout timeparms; struct rpc_clnt *clnt = NULL; @@ -407,6 +408,7 @@ static int nfs_create_rpc_client(struct nfs_client *clp, int proto, .program = &nfs_program, .version = clp->rpc_ops->version, .authflavor = flavor, + .flags = flags, }; if (!IS_ERR(clp->cl_rpcclient)) @@ -548,7 +550,7 @@ static int nfs_init_client(struct nfs_client *clp, const struct nfs_mount_data * * - RFC 2623, sec 2.3.2 */ error = nfs_create_rpc_client(clp, proto, data->timeo, data->retrans, - RPC_AUTH_UNIX); + RPC_AUTH_UNIX, 0); if (error < 0) goto error; nfs_mark_client_ready(clp, NFS_CS_READY); @@ -868,7 +870,8 @@ static int nfs4_init_client(struct nfs_client *clp, /* Check NFS protocol revision and initialize RPC op vector */ clp->rpc_ops = &nfs_v4_clientops; - error = nfs_create_rpc_client(clp, proto, timeo, retrans, authflavour); + error = nfs_create_rpc_client(clp, proto, timeo, retrans, authflavour, + RPC_CLNT_CREATE_DISCRTRY); if (error < 0) goto error; memcpy(clp->cl_ipaddr, ip_addr, sizeof(clp->cl_ipaddr)); diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h index a1be89d..c7a78eef2 100644 --- a/include/linux/sunrpc/clnt.h +++ b/include/linux/sunrpc/clnt.h @@ -40,6 +40,7 @@ struct rpc_clnt { unsigned int cl_softrtry : 1,/* soft timeouts */ cl_intr : 1,/* interruptible */ + cl_discrtry : 1,/* disconnect before retry */ cl_autobind : 1,/* use getport() */ cl_oneshot : 1,/* dispose after use */ cl_dead : 1;/* abandoned */ @@ -111,6 +112,7 @@ struct rpc_create_args { #define RPC_CLNT_CREATE_ONESHOT (1UL << 3) #define RPC_CLNT_CREATE_NONPRIVPORT (1UL << 4) #define RPC_CLNT_CREATE_NOPING (1UL << 5) +#define RPC_CLNT_CREATE_DISCRTRY (1UL << 6) struct rpc_clnt *rpc_create(struct rpc_create_args *args); struct rpc_clnt *rpc_bind_new_program(struct rpc_clnt *, diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 393e70a..c21aa0a 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -249,6 +249,8 @@ struct rpc_clnt *rpc_create(struct rpc_create_args *args) clnt->cl_autobind = 1; if (args->flags & RPC_CLNT_CREATE_ONESHOT) clnt->cl_oneshot = 1; + if (args->flags & RPC_CLNT_CREATE_DISCRTRY) + clnt->cl_discrtry = 1; return clnt; } diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index cf59f7d..1975139 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -735,6 +735,16 @@ void xprt_transmit(struct rpc_task *task) xprt_reset_majortimeo(req); /* Turn off autodisconnect */ del_singleshot_timer_sync(&xprt->timer); + } else { + /* If all request bytes have been sent, + * then we must be retransmitting this one */ + if (!req->rq_bytes_sent) { + if (task->tk_client->cl_discrtry) { + xprt_disconnect(xprt); + task->tk_status = -ENOTCONN; + return; + } + } } } else if (!req->rq_bytes_sent) return; -- cgit v0.10.2 From 3b4d9539628502768fe7f8fd4b48f2fbf2426255 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 13 Feb 2007 15:42:28 +0900 Subject: sh: heartbeat consolidation for banked LEDs. This consolidates the various board heartbeat LED implementations, used for strobing the load average across a LED bank. Those boards not implementing a full bank can hook in via the LED class. We leave the compat hook in the machvec for now until those non-banked boards are able to migrate to the drivers/leds. Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index d18310a..90c8c42 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -512,7 +512,8 @@ config HEARTBEAT bool "Heartbeat LED" depends on SH_MPC1211 || SH_SH03 || \ SH_BIGSUR || SOLUTION_ENGINE || \ - SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_LANDISK + SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_LANDISK || \ + SH_R7780RP help Use the power-on LED on your machine as a load meter. The exact behavior is platform-dependent, but normally the flash frequency is diff --git a/arch/sh/boards/mpc1211/Makefile b/arch/sh/boards/mpc1211/Makefile index 1644ebe..8cd31b5 100644 --- a/arch/sh/boards/mpc1211/Makefile +++ b/arch/sh/boards/mpc1211/Makefile @@ -2,7 +2,7 @@ # Makefile for the Interface (CTP/PCI/MPC-SH02) specific parts of the kernel # -obj-y := setup.o rtc.o led.o +obj-y := setup.o rtc.o obj-$(CONFIG_PCI) += pci.o diff --git a/arch/sh/boards/mpc1211/led.c b/arch/sh/boards/mpc1211/led.c deleted file mode 100644 index 8df1591..0000000 --- a/arch/sh/boards/mpc1211/led.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * linux/arch/sh/boards/mpc1211/led.c - * - * Copyright (C) 2001 Saito.K & Jeanne - * - * This file contains Interface MPC-1211 specific LED code. - */ - - -static void mach_led(int position, int value) -{ - volatile unsigned char* p = (volatile unsigned char*)0xa2000000; - - if (value) { - *p |= 1; - } else { - *p &= ~1; - } -} - -#ifdef CONFIG_HEARTBEAT - -#include - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_mpc1211(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned char* p = (volatile unsigned char*)0xa2000000; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ( (300< #include #include +#include #include #include #include @@ -281,6 +282,32 @@ static int put_smb_blk(unsigned char *p, int address, int command, int no) return 0; } +static struct resource heartbeat_resources[] = { + [0] = { + .start = 0xa2000000, + .end = 0xa2000000 + 8 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *mpc1211_devices[] __initdata = { + &heartbeat_device, +}; + +static int __init mpc1211_devices_setup(void) +{ + return platform_add_devices(mpc1211_devices, + ARRAY_SIZE(mpc1211_devices)); +} +__initcall(mpc1211_devices_setup); + /* arch/sh/boards/mpc1211/rtc.c */ void mpc1211_time_init(void); @@ -317,9 +344,5 @@ struct sh_machine_vector mv_mpc1211 __initmv = { .mv_nr_irqs = 48, .mv_irq_demux = mpc1211_irq_demux, .mv_init_irq = init_mpc1211_IRQ, - -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_mpc1211, -#endif }; ALIAS_MV(mpc1211) diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/renesas/r7780rp/Makefile index 574b031..3c93012 100644 --- a/arch/sh/boards/renesas/r7780rp/Makefile +++ b/arch/sh/boards/renesas/r7780rp/Makefile @@ -4,5 +4,4 @@ obj-y := setup.o io.o irq.o -obj-$(CONFIG_HEARTBEAT) += led.o obj-$(CONFIG_PUSH_SWITCH) += psw.o diff --git a/arch/sh/boards/renesas/r7780rp/led.c b/arch/sh/boards/renesas/r7780rp/led.c deleted file mode 100644 index 6a00a25..0000000 --- a/arch/sh/boards/renesas/r7780rp/led.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright (C) Atom Create Engineering Co., Ltd. - * - * May be copied or modified under the terms of GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Renesas Solutions HIGHLANDER R7780RP-1 specific LED code. - */ -#include -#include -#include - -/* Cycle the LED's in the clasic Knightriger/Sun pattern */ -void heartbeat_r7780rp(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short *p = (volatile unsigned short *)PA_OBLED; - static unsigned bit = 0, up = 1; - unsigned bit_pos[] = {2, 1, 0, 3, 6, 5, 4, 7}; - - cnt += 1; - if (cnt < period) - return; - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35, f(int)->110 - */ - period = 110 - ((300 << FSHIFT)/((avenrun[0]/5) + (3< #include -extern void heartbeat_r7780rp(void); extern void init_r7780rp_IRQ(void); static struct resource m66596_usb_host_resources[] = { @@ -72,9 +71,30 @@ static struct platform_device cf_ide_device = { .resource = cf_ide_resources, }; +static unsigned char heartbeat_bit_pos[] = { 2, 1, 0, 3, 6, 5, 4, 7 }; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_OBLED, + .end = PA_OBLED + ARRAY_SIZE(heartbeat_bit_pos) - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = heartbeat_bit_pos, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + static struct platform_device *r7780rp_devices[] __initdata = { &m66596_usb_host_device, &cf_ide_device, + &heartbeat_device, }; static int __init r7780rp_devices_setup(void) @@ -185,8 +205,5 @@ struct sh_machine_vector mv_r7780rp __initmv = { .mv_ioport_map = r7780rp_ioport_map, .mv_init_irq = init_r7780rp_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_r7780rp, -#endif }; ALIAS_MV(r7780rp) diff --git a/arch/sh/boards/renesas/rts7751r2d/Makefile b/arch/sh/boards/renesas/rts7751r2d/Makefile index 686fc9e..833de1e 100644 --- a/arch/sh/boards/renesas/rts7751r2d/Makefile +++ b/arch/sh/boards/renesas/rts7751r2d/Makefile @@ -3,4 +3,3 @@ # obj-y := setup.o io.o irq.o -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/renesas/rts7751r2d/led.c b/arch/sh/boards/renesas/rts7751r2d/led.c deleted file mode 100644 index 509f548..0000000 --- a/arch/sh/boards/renesas/rts7751r2d/led.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * linux/arch/sh/boards/renesas/rts7751r2d/led.c - * - * Copyright (C) Atom Create Engineering Co., Ltd. - * - * May be copied or modified under the terms of GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Renesas Technology Sales RTS7751R2D specific LED code. - */ -#include -#include -#include - -/* Cycle the LED's in the clasic Knightriger/Sun pattern */ -void heartbeat_rts7751r2d(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short *p = (volatile unsigned short *)PA_OUTPORT; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) - return; - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35, f(int)->110 - */ - period = 110 - ((300 << FSHIFT)/((avenrun[0]/5) + (3< - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Solution Engine specific LED code. - */ - -#include -#include - -#ifdef CONFIG_HEARTBEAT - -#include - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_se(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short* p = (volatile unsigned short*)PA_LED; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ( (300< - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Solution Engine specific LED code. - */ - -#include -#include - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_7300se(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short *p = (volatile unsigned short *) PA_LED; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT))); - - if (up) { - if (bit == 7) { - bit--; - up = 0; - } else { - bit++; - } - } else { - if (bit == 0) { - bit++; - up = 1; - } else { - bit--; - } - } - *p = 1 << (bit + 8); - -} - diff --git a/arch/sh/boards/se/7300/setup.c b/arch/sh/boards/se/7300/setup.c index 6f082a7..f196095 100644 --- a/arch/sh/boards/se/7300/setup.c +++ b/arch/sh/boards/se/7300/setup.c @@ -6,14 +6,43 @@ * SH-Mobile SolutionEngine 7300 Support. * */ - #include +#include #include #include -void heartbeat_7300se(void); void init_7300se_IRQ(void); +static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = heartbeat_bit_pos, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *se7300_devices[] __initdata = { + &heartbeat_device, +}; + +static int __init se7300_devices_setup(void) +{ + return platform_add_devices(se7300_devices, ARRAY_SIZE(se7300_devices)); +} +__initcall(se7300_devices_setup); + /* * The Machine Vector */ @@ -42,8 +71,5 @@ struct sh_machine_vector mv_7300se __initmv = { .mv_outsl = sh7300se_outsl, .mv_init_irq = init_7300se_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_7300se, -#endif }; ALIAS_MV(7300se) diff --git a/arch/sh/boards/se/73180/Makefile b/arch/sh/boards/se/73180/Makefile index 8f63886..e7c0996 100644 --- a/arch/sh/boards/se/73180/Makefile +++ b/arch/sh/boards/se/73180/Makefile @@ -3,5 +3,3 @@ # obj-y := setup.o io.o irq.o - -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/73180/led.c b/arch/sh/boards/se/73180/led.c deleted file mode 100644 index 4b72e9a..0000000 --- a/arch/sh/boards/se/73180/led.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * arch/sh/boards/se/73180/led.c - * - * Derived from arch/sh/boards/se/770x/led.c - * - * Copyright (C) 2000 Stuart Menefy - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Solution Engine specific LED code. - */ - -#include -#include - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_73180se(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short *p = (volatile unsigned short *) PA_LED; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT))); - - if (up) { - if (bit == 7) { - bit--; - up = 0; - } else { - bit++; - } - } else { - if (bit == 0) { - bit++; - up = 1; - } else { - bit--; - } - } - *p = 1 << (bit + LED_SHIFT); - -} diff --git a/arch/sh/boards/se/73180/setup.c b/arch/sh/boards/se/73180/setup.c index b38ef50..911ce1c 100644 --- a/arch/sh/boards/se/73180/setup.c +++ b/arch/sh/boards/se/73180/setup.c @@ -10,13 +10,39 @@ */ #include +#include #include #include #include -void heartbeat_73180se(void); void init_73180se_IRQ(void); +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED + 8 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *se73180_devices[] __initdata = { + &heartbeat_device, +}; + +static int __init se73180_devices_setup(void) +{ + return platform_add_devices(sh7343se_platform_devices, + ARRAY_SIZE(sh7343se_platform_devices)); +} +__initcall(se73180_devices_setup); + /* * The Machine Vector */ @@ -46,8 +72,5 @@ struct sh_machine_vector mv_73180se __initmv = { .mv_init_irq = init_73180se_IRQ, .mv_irq_demux = shmse_irq_demux, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_73180se, -#endif }; ALIAS_MV(73180se) diff --git a/arch/sh/boards/se/7343/Makefile b/arch/sh/boards/se/7343/Makefile index 4291069..3024796 100644 --- a/arch/sh/boards/se/7343/Makefile +++ b/arch/sh/boards/se/7343/Makefile @@ -3,5 +3,3 @@ # obj-y := setup.o io.o irq.o - -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/7343/led.c b/arch/sh/boards/se/7343/led.c deleted file mode 100644 index 6b39e19..0000000 --- a/arch/sh/boards/se/7343/led.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * arch/sh/boards/se/7343/led.c - * - */ -#include -#include - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_7343se(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short *p = (volatile unsigned short *) PA_LED; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT))); - - if (up) { - if (bit == 7) { - bit--; - up = 0; - } else { - bit++; - } - } else { - if (bit == 0) { - bit++; - up = 1; - } else { - bit--; - } - } - *p = 1 << (bit + LED_SHIFT); - -} diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c index c7d17fe..3fdb16f 100644 --- a/arch/sh/boards/se/7343/setup.c +++ b/arch/sh/boards/se/7343/setup.c @@ -4,7 +4,6 @@ #include #include -void heartbeat_7343se(void); void init_7343se_IRQ(void); static struct resource smc91x_resources[] = { @@ -31,14 +30,30 @@ static struct platform_device smc91x_device = { .resource = smc91x_resources, }; -static struct platform_device *smc91x_platform_devices[] __initdata = { +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED + 8 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *sh7343se_platform_devices[] __initdata = { &smc91x_device, + &heartbeat_device, }; static int __init sh7343se_devices_setup(void) { - return platform_add_devices(smc91x_platform_devices, - ARRAY_SIZE(smc91x_platform_devices)); + return platform_add_devices(sh7343se_platform_devices, + ARRAY_SIZE(sh7343se_platform_devices)); } static void __init sh7343se_setup(char **cmdline_p) @@ -76,8 +91,5 @@ struct sh_machine_vector mv_7343se __initmv = { .mv_init_irq = init_7343se_IRQ, .mv_irq_demux = shmse_irq_demux, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_7343se, -#endif }; ALIAS_MV(7343se) diff --git a/arch/sh/boards/se/770x/Makefile b/arch/sh/boards/se/770x/Makefile index 9a5035f..8e624b0 100644 --- a/arch/sh/boards/se/770x/Makefile +++ b/arch/sh/boards/se/770x/Makefile @@ -3,4 +3,3 @@ # obj-y := setup.o io.o irq.o -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/770x/led.c b/arch/sh/boards/se/770x/led.c deleted file mode 100644 index d93dd83..0000000 --- a/arch/sh/boards/se/770x/led.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * linux/arch/sh/boards/se/770x/led.c - * - * Copyright (C) 2000 Stuart Menefy - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Solution Engine specific LED code. - */ - -#include -#include - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_se(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short* p = (volatile unsigned short*)PA_LED; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ( (300< +#include #include #include #include #include -void heartbeat_se(void); void init_se_IRQ(void); /* @@ -63,6 +63,36 @@ static void __init smsc_setup(char **cmdline_p) outb_p(CONFIG_EXIT, CONFIG_PORT); } +static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = heartbeat_bit_pos, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *se_devices[] __initdata = { + &heartbeat_device, +}; + +static int __init se_devices_setup(void) +{ + return platform_add_devices(se_devices, ARRAY_SIZE(se_devices)); +} +__initcall(se_devices_setup); + /* * The Machine Vector */ @@ -101,8 +131,5 @@ struct sh_machine_vector mv_se __initmv = { .mv_outsl = se_outsl, .mv_init_irq = init_se_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_se, -#endif }; ALIAS_MV(se) diff --git a/arch/sh/boards/se/7751/Makefile b/arch/sh/boards/se/7751/Makefile index 188900c..dbc29f3 100644 --- a/arch/sh/boards/se/7751/Makefile +++ b/arch/sh/boards/se/7751/Makefile @@ -5,4 +5,3 @@ obj-y := setup.o io.o irq.o obj-$(CONFIG_PCI) += pci.o -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/7751/led.c b/arch/sh/boards/se/7751/led.c deleted file mode 100644 index de4194d..0000000 --- a/arch/sh/boards/se/7751/led.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * linux/arch/sh/boards/se/7751/led.c - * - * Copyright (C) 2000 Stuart Menefy - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Solution Engine specific LED code. - */ -#include -#include - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_7751se(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short* p = (volatile unsigned short*)PA_LED; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ( (300< +#include #include #include #include -void heartbeat_7751se(void); void init_7751se_IRQ(void); #ifdef CONFIG_SH_KGDB @@ -161,11 +161,40 @@ static int kgdb_uart_setup(void) } #endif /* CONFIG_SH_KGDB */ +static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = heartbeat_bit_pos, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *se7751_devices[] __initdata = { + &smc91x_device, + &heartbeat_device, +}; + +static int __init se7751_devices_setup(void) +{ + return platform_add_devices(se7751_devices, ARRAY_SIZE(se7751_devices)); +} +__initcall(se7751_devices_setup); /* * The Machine Vector */ - struct sh_machine_vector mv_7751se __initmv = { .mv_name = "7751 SolutionEngine", .mv_setup = sh7751se_setup, @@ -189,8 +218,5 @@ struct sh_machine_vector mv_7751se __initmv = { .mv_outsl = sh7751se_outsl, .mv_init_irq = init_7751se_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_7751se, -#endif }; ALIAS_MV(7751se) diff --git a/arch/sh/boards/sh03/Makefile b/arch/sh/boards/sh03/Makefile index 321be50..400306a 100644 --- a/arch/sh/boards/sh03/Makefile +++ b/arch/sh/boards/sh03/Makefile @@ -3,4 +3,3 @@ # obj-y := setup.o rtc.o -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/sh03/led.c b/arch/sh/boards/sh03/led.c deleted file mode 100644 index d38562a..0000000 --- a/arch/sh/boards/sh03/led.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * linux/arch/sh/boards/sh03/led.c - * - * Copyright (C) 2004 Saito.K Interface Corporation. - * - * This file contains Interface CTP/PCI-SH03 specific LED code. - */ - -#include - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_sh03(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned char* p = (volatile unsigned char*)0xa0800000; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ( (300< #include #include +#include #include #include #include @@ -48,15 +49,36 @@ static void __init sh03_setup(char **cmdline_p) board_time_init = sh03_time_init; } +static struct resource heartbeat_resources[] = { + [0] = { + .start = 0xa0800000, + .end = 0xa0800000 + 8 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *sh03_devices[] __initdata = { + &heartbeat_device, +}; + +static int __init sh03_devices_setup(void) +{ + return platform_add_devices(sh03_devices, ARRAY_SIZE(sh03_devices)); +} +__initcall(sh03_devices_setup); + struct sh_machine_vector mv_sh03 __initmv = { .mv_name = "Interface (CTP/PCI-SH03)", .mv_setup = sh03_setup, .mv_nr_irqs = 48, .mv_ioport_map = sh03_ioport_map, .mv_init_irq = init_sh03_IRQ, - -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_sh03, -#endif }; ALIAS_MV(sh03) diff --git a/arch/sh/drivers/Makefile b/arch/sh/drivers/Makefile index bf18dbf..6cb9267 100644 --- a/arch/sh/drivers/Makefile +++ b/arch/sh/drivers/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_PCI) += pci/ obj-$(CONFIG_SH_DMA) += dma/ obj-$(CONFIG_SUPERHYWAY) += superhyway/ obj-$(CONFIG_PUSH_SWITCH) += push-switch.o +obj-$(CONFIG_HEARTBEAT) += heartbeat.o -- cgit v0.10.2 From 401e9093a326725780aed270a6eb53e7ddab14ff Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 13 Feb 2007 15:46:39 +0900 Subject: sh: Compile fix for heartbeat consolidation. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/heartbeat.c b/arch/sh/drivers/heartbeat.c new file mode 100644 index 0000000..bc59cb6 --- /dev/null +++ b/arch/sh/drivers/heartbeat.c @@ -0,0 +1,132 @@ +/* + * Generic heartbeat driver for regular LED banks + * + * Copyright (C) 2007 Paul Mundt + * + * Most SH reference boards include a number of individual LEDs that can + * be independently controlled (either via a pre-defined hardware + * function or via the LED class, if desired -- the hardware tends to + * encapsulate some of the same "triggers" that the LED class supports, + * so there's not too much value in it). + * + * Additionally, most of these boards also have a LED bank that we've + * traditionally used for strobing the load average. This use case is + * handled by this driver, rather than giving each LED bit position its + * own struct device. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "heartbeat" +#define DRV_VERSION "0.1.0" + +struct heartbeat_data { + void __iomem *base; + unsigned char bit_pos[8]; + struct timer_list timer; +}; + +static void heartbeat_timer(unsigned long data) +{ + struct heartbeat_data *hd = (struct heartbeat_data *)data; + static unsigned bit = 0, up = 1; + + ctrl_outw(1 << hd->bit_pos[bit], (unsigned long)hd->base); + if (up) + if (bit == (ARRAY_SIZE(hd->bit_pos) - 1)) { + bit--; + up = 0; + } else + bit++; + else if (bit == 0) + up = 1; + else + bit--; + + mod_timer(&hd->timer, jiffies + (110 - ((300 << FSHIFT) / + ((avenrun[0] / 5) + (3 << FSHIFT))))); +} + +static int heartbeat_drv_probe(struct platform_device *pdev) +{ + struct resource *res; + struct heartbeat_data *hd; + + if (unlikely(pdev->num_resources != 1)) { + dev_err(&pdev->dev, "invalid number of resources\n"); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(res == NULL)) { + dev_err(&pdev->dev, "invalid resource\n"); + return -EINVAL; + } + + hd = kmalloc(sizeof(struct heartbeat_data), GFP_KERNEL); + if (unlikely(!hd)) + return -ENOMEM; + + if (pdev->dev.platform_data) { + memcpy(hd->bit_pos, pdev->dev.platform_data, + ARRAY_SIZE(hd->bit_pos)); + } else { + int i; + + for (i = 0; i < ARRAY_SIZE(hd->bit_pos); i++) + hd->bit_pos[i] = i; + } + + hd->base = (void __iomem *)res->start; + + setup_timer(&hd->timer, heartbeat_timer, (unsigned long)hd); + platform_set_drvdata(pdev, hd); + + return mod_timer(&hd->timer, jiffies + 1); +} + +static int heartbeat_drv_remove(struct platform_device *pdev) +{ + struct heartbeat_data *hd = platform_get_drvdata(pdev); + + del_timer_sync(&hd->timer); + + platform_set_drvdata(pdev, NULL); + + kfree(hd); + + return 0; +} + +static struct platform_driver heartbeat_driver = { + .probe = heartbeat_drv_probe, + .remove = heartbeat_drv_remove, + .driver = { + .name = DRV_NAME, + }, +}; + +static int __init heartbeat_init(void) +{ + printk(KERN_NOTICE DRV_NAME ": version %s loaded\n", DRV_VERSION); + return platform_driver_register(&heartbeat_driver); +} + +static void __exit heartbeat_exit(void) +{ + platform_driver_unregister(&heartbeat_driver); +} +module_init(heartbeat_init); +module_exit(heartbeat_exit); + +MODULE_VERSION(DRV_VERSION); +MODULE_AUTHOR("Paul Mundt"); +MODULE_LICENSE("GPLv2"); -- cgit v0.10.2 From 287eeb5e02bfd9ddcb881f47400510b5cda686d1 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:19 +0100 Subject: [PATCH] x86-64: Update defconfig Signed-off-by: Andi Kleen diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig index 69584c2..293a4a4 100644 --- a/arch/x86_64/defconfig +++ b/arch/x86_64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc3 -# Fri Jan 5 11:54:41 2007 +# Linux kernel version: 2.6.20-git8 +# Tue Feb 13 11:25:16 2007 # CONFIG_X86_64=y CONFIG_64BIT=y @@ -11,6 +11,7 @@ CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y +CONFIG_ZONE_DMA=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -153,6 +154,7 @@ CONFIG_NEED_MULTIPLE_NODES=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y CONFIG_OUT_OF_LINE_PFN_TO_PAGE=y CONFIG_NR_CPUS=32 @@ -201,13 +203,14 @@ CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SLEEP_PROC_FS=y CONFIG_ACPI_SLEEP_PROC_SLEEP=y +CONFIG_ACPI_PROCFS=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y -# CONFIG_ACPI_VIDEO is not set # CONFIG_ACPI_HOTKEY is not set CONFIG_ACPI_FAN=y # CONFIG_ACPI_DOCK is not set +# CONFIG_ACPI_BAY is not set CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=y @@ -263,7 +266,6 @@ CONFIG_PCI_MMCONFIG=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y CONFIG_PCI_MSI=y -# CONFIG_PCI_MULTITHREAD_PROBE is not set # CONFIG_PCI_DEBUG is not set # CONFIG_HT_IRQ is not set @@ -398,6 +400,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # @@ -466,6 +469,7 @@ CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set +CONFIG_BLK_DEV_IDEACPI=y # CONFIG_IDE_TASK_IOCTL is not set # @@ -497,6 +501,7 @@ CONFIG_BLK_DEV_ATIIXP=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y +# CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set @@ -507,6 +512,7 @@ CONFIG_BLK_DEV_PDC202XX_NEW=y # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set @@ -599,6 +605,7 @@ CONFIG_MEGARAID_SAS=y # Serial ATA (prod) and Parallel ATA (experimental) drivers # CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_AHCI=y CONFIG_SATA_SVW=y CONFIG_ATA_PIIX=y @@ -614,6 +621,7 @@ CONFIG_SATA_SIL=y # CONFIG_SATA_ULI is not set CONFIG_SATA_VIA=y # CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set CONFIG_SATA_INTEL_COMBINED=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set @@ -630,6 +638,7 @@ CONFIG_SATA_INTEL_COMBINED=y # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set @@ -682,9 +691,7 @@ CONFIG_IEEE1394=y # Subsystem Options # # CONFIG_IEEE1394_VERBOSEDEBUG is not set -# CONFIG_IEEE1394_OUI_DB is not set # CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set -# CONFIG_IEEE1394_EXPORT_FULL_API is not set # # Device Drivers @@ -707,6 +714,11 @@ CONFIG_IEEE1394_RAWIO=y # CONFIG_I2O is not set # +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set + +# # Network device support # CONFIG_NETDEVICES=y @@ -774,6 +786,7 @@ CONFIG_8139TOO=y # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set # # Ethernet (1000 Mbit) @@ -795,11 +808,13 @@ CONFIG_E1000=y CONFIG_TIGON3=y CONFIG_BNX2=y # CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set CONFIG_S2IO=m # CONFIG_S2IO_NAPI is not set @@ -1115,6 +1130,7 @@ CONFIG_SOUND=y # Open Sound System # CONFIG_SOUND_PRIME=y +CONFIG_OBSOLETE_OSS=y # CONFIG_SOUND_BT878 is not set # CONFIG_SOUND_ES1371 is not set CONFIG_SOUND_ICH=y @@ -1128,6 +1144,7 @@ CONFIG_SOUND_ICH=y # HID Devices # CONFIG_HID=y +# CONFIG_HID_DEBUG is not set # # USB support @@ -1142,10 +1159,8 @@ CONFIG_USB=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set -# CONFIG_USB_MULTITHREAD_PROBE is not set # CONFIG_USB_OTG is not set # @@ -1155,9 +1170,11 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set @@ -1208,6 +1225,7 @@ CONFIG_USB_HID=y # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_GTCO is not set # # USB Imaging devices @@ -1313,6 +1331,10 @@ CONFIG_USB_MON=y # # +# Auxiliary Display support +# + +# # Virtualization # # CONFIG_KVM is not set @@ -1512,6 +1534,7 @@ CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set CONFIG_LOG_BUF_SHIFT=18 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set @@ -1520,7 +1543,6 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set @@ -1560,4 +1582,5 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y -CONFIG_IOMAP_COPY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y -- cgit v0.10.2 From ee55c0be30429d7c3e61fa26c7f7e323c80e14f0 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:19 +0100 Subject: [PATCH] i386: Update defconfig Signed-off-by: Andi Kleen diff --git a/arch/i386/defconfig b/arch/i386/defconfig index bb0c376..5ae1e0b 100644 --- a/arch/i386/defconfig +++ b/arch/i386/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc3 -# Fri Jan 5 11:54:46 2007 +# Linux kernel version: 2.6.20-git8 +# Tue Feb 13 11:25:18 2007 # CONFIG_X86_32=y CONFIG_GENERIC_TIME=y @@ -10,6 +10,7 @@ CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_X86=y CONFIG_MMU=y +CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y @@ -139,7 +140,6 @@ CONFIG_MPENTIUMIII=y # CONFIG_MVIAC3_2 is not set CONFIG_X86_GENERIC=y CONFIG_X86_CMPXCHG=y -CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_RWSEM_XCHGADD_ALGORITHM=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set @@ -198,6 +198,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HIGHPTE is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y @@ -211,6 +212,7 @@ CONFIG_HZ_250=y CONFIG_HZ=250 # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_PHYSICAL_START=0x100000 # CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x100000 # CONFIG_HOTPLUG_CPU is not set @@ -229,13 +231,14 @@ CONFIG_PM_SYSFS_DEPRECATED=y # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y +CONFIG_ACPI_PROCFS=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y -# CONFIG_ACPI_VIDEO is not set # CONFIG_ACPI_HOTKEY is not set CONFIG_ACPI_FAN=y # CONFIG_ACPI_DOCK is not set +# CONFIG_ACPI_BAY is not set CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set @@ -306,7 +309,6 @@ CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y # CONFIG_PCIEPORTBUS is not set CONFIG_PCI_MSI=y -# CONFIG_PCI_MULTITHREAD_PROBE is not set # CONFIG_PCI_DEBUG is not set # CONFIG_HT_IRQ is not set CONFIG_ISA_DMA_API=y @@ -347,6 +349,7 @@ CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -446,6 +449,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # @@ -466,8 +470,7 @@ CONFIG_FW_LOADER=y # # Plug and Play support # -CONFIG_PNP=y -CONFIG_PNPACPI=y +# CONFIG_PNP is not set # # Block devices @@ -515,6 +518,7 @@ CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set +CONFIG_BLK_DEV_IDEACPI=y # CONFIG_IDE_TASK_IOCTL is not set # @@ -547,6 +551,7 @@ CONFIG_BLK_DEV_AMD74XX=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y +# CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set @@ -557,6 +562,7 @@ CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set @@ -655,6 +661,7 @@ CONFIG_AIC79XX_DEBUG_MASK=0 # Serial ATA (prod) and Parallel ATA (experimental) drivers # CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_AHCI=y CONFIG_SATA_SVW=y CONFIG_ATA_PIIX=y @@ -670,6 +677,7 @@ CONFIG_SATA_SIL=y # CONFIG_SATA_ULI is not set CONFIG_SATA_VIA=y # CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set CONFIG_SATA_INTEL_COMBINED=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set @@ -687,6 +695,7 @@ CONFIG_SATA_INTEL_COMBINED=y # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set @@ -739,9 +748,7 @@ CONFIG_IEEE1394=y # Subsystem Options # # CONFIG_IEEE1394_VERBOSEDEBUG is not set -# CONFIG_IEEE1394_OUI_DB is not set # CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set -# CONFIG_IEEE1394_EXPORT_FULL_API is not set # # Device Drivers @@ -767,6 +774,11 @@ CONFIG_IEEE1394_RAWIO=y # CONFIG_I2O is not set # +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set + +# # Network device support # CONFIG_NETDEVICES=y @@ -833,6 +845,7 @@ CONFIG_8139TOO=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set # # Ethernet (1000 Mbit) @@ -855,11 +868,13 @@ CONFIG_SKY2=y CONFIG_TIGON3=y CONFIG_BNX2=y # CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set @@ -1090,6 +1105,7 @@ CONFIG_SOUND=y # Open Sound System # CONFIG_SOUND_PRIME=y +CONFIG_OBSOLETE_OSS=y # CONFIG_SOUND_BT878 is not set # CONFIG_SOUND_ES1371 is not set CONFIG_SOUND_ICH=y @@ -1103,6 +1119,7 @@ CONFIG_SOUND_ICH=y # HID Devices # CONFIG_HID=y +# CONFIG_HID_DEBUG is not set # # USB support @@ -1117,10 +1134,8 @@ CONFIG_USB=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set -# CONFIG_USB_MULTITHREAD_PROBE is not set # CONFIG_USB_OTG is not set # @@ -1130,9 +1145,11 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set @@ -1183,6 +1200,7 @@ CONFIG_USB_HID=y # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_GTCO is not set # # USB Imaging devices @@ -1288,6 +1306,10 @@ CONFIG_USB_MON=y # # +# Auxiliary Display support +# + +# # Virtualization # # CONFIG_KVM is not set @@ -1480,6 +1502,7 @@ CONFIG_UNUSED_SYMBOLS=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set CONFIG_LOG_BUF_SHIFT=18 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set @@ -1488,7 +1511,6 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set @@ -1533,7 +1555,8 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y -CONFIG_IOMAP_COPY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y -- cgit v0.10.2 From 0812a579c92fefa57506821fa08e90f47cb6dbdd Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:19 +0100 Subject: [PATCH] x86-64: Add __copy_from_user_nocache This does user copies in fs write() into the page cache with write combining. This pushes the destination out of the CPU's cache, but allows higher bandwidth in some case. The theory is that the page cache data is usually not touched by the CPU again and it's better to not pollute the cache with it. Also it is a little faster. Signed-off-by: Andi Kleen diff --git a/arch/x86_64/kernel/x8664_ksyms.c b/arch/x86_64/kernel/x8664_ksyms.c index 6d77e47..23a7da3 100644 --- a/arch/x86_64/kernel/x8664_ksyms.c +++ b/arch/x86_64/kernel/x8664_ksyms.c @@ -26,6 +26,7 @@ EXPORT_SYMBOL(__put_user_4); EXPORT_SYMBOL(__put_user_8); EXPORT_SYMBOL(copy_user_generic); +EXPORT_SYMBOL(__copy_user_nocache); EXPORT_SYMBOL(copy_from_user); EXPORT_SYMBOL(copy_to_user); EXPORT_SYMBOL(__copy_from_user_inatomic); diff --git a/arch/x86_64/lib/Makefile b/arch/x86_64/lib/Makefile index b78d417..8d5f835 100644 --- a/arch/x86_64/lib/Makefile +++ b/arch/x86_64/lib/Makefile @@ -9,4 +9,4 @@ obj-y := io.o iomap_copy.o lib-y := csum-partial.o csum-copy.o csum-wrappers.o delay.o \ usercopy.o getuser.o putuser.o \ thunk.o clear_page.o copy_page.o bitstr.o bitops.o -lib-y += memcpy.o memmove.o memset.o copy_user.o rwlock.o +lib-y += memcpy.o memmove.o memset.o copy_user.o rwlock.o copy_user_nocache.o diff --git a/arch/x86_64/lib/copy_user_nocache.S b/arch/x86_64/lib/copy_user_nocache.S new file mode 100644 index 0000000..4620efb --- /dev/null +++ b/arch/x86_64/lib/copy_user_nocache.S @@ -0,0 +1,217 @@ +/* Copyright 2002 Andi Kleen, SuSE Labs. + * Subject to the GNU Public License v2. + * + * Functions to copy from and to user space. + */ + +#include +#include + +#define FIX_ALIGNMENT 1 + +#include +#include +#include +#include + +/* + * copy_user_nocache - Uncached memory copy with exception handling + * This will force destination/source out of cache for more performance. + * + * Input: + * rdi destination + * rsi source + * rdx count + * rcx zero flag when 1 zero on exception + * + * Output: + * eax uncopied bytes or 0 if successful. + */ +ENTRY(__copy_user_nocache) + CFI_STARTPROC + pushq %rbx + CFI_ADJUST_CFA_OFFSET 8 + CFI_REL_OFFSET rbx, 0 + pushq %rcx /* save zero flag */ + CFI_ADJUST_CFA_OFFSET 8 + CFI_REL_OFFSET rcx, 0 + + xorl %eax,%eax /* zero for the exception handler */ + +#ifdef FIX_ALIGNMENT + /* check for bad alignment of destination */ + movl %edi,%ecx + andl $7,%ecx + jnz .Lbad_alignment +.Lafter_bad_alignment: +#endif + + movq %rdx,%rcx + + movl $64,%ebx + shrq $6,%rdx + decq %rdx + js .Lhandle_tail + + .p2align 4 +.Lloop: +.Ls1: movq (%rsi),%r11 +.Ls2: movq 1*8(%rsi),%r8 +.Ls3: movq 2*8(%rsi),%r9 +.Ls4: movq 3*8(%rsi),%r10 +.Ld1: movnti %r11,(%rdi) +.Ld2: movnti %r8,1*8(%rdi) +.Ld3: movnti %r9,2*8(%rdi) +.Ld4: movnti %r10,3*8(%rdi) + +.Ls5: movq 4*8(%rsi),%r11 +.Ls6: movq 5*8(%rsi),%r8 +.Ls7: movq 6*8(%rsi),%r9 +.Ls8: movq 7*8(%rsi),%r10 +.Ld5: movnti %r11,4*8(%rdi) +.Ld6: movnti %r8,5*8(%rdi) +.Ld7: movnti %r9,6*8(%rdi) +.Ld8: movnti %r10,7*8(%rdi) + + dec %rdx + + leaq 64(%rsi),%rsi + leaq 64(%rdi),%rdi + + jns .Lloop + + .p2align 4 +.Lhandle_tail: + movl %ecx,%edx + andl $63,%ecx + shrl $3,%ecx + jz .Lhandle_7 + movl $8,%ebx + .p2align 4 +.Lloop_8: +.Ls9: movq (%rsi),%r8 +.Ld9: movnti %r8,(%rdi) + decl %ecx + leaq 8(%rdi),%rdi + leaq 8(%rsi),%rsi + jnz .Lloop_8 + +.Lhandle_7: + movl %edx,%ecx + andl $7,%ecx + jz .Lende + .p2align 4 +.Lloop_1: +.Ls10: movb (%rsi),%bl +.Ld10: movb %bl,(%rdi) + incq %rdi + incq %rsi + decl %ecx + jnz .Lloop_1 + + CFI_REMEMBER_STATE +.Lende: + popq %rcx + CFI_ADJUST_CFA_OFFSET -8 + CFI_RESTORE %rcx + popq %rbx + CFI_ADJUST_CFA_OFFSET -8 + CFI_RESTORE rbx + ret + CFI_RESTORE_STATE + +#ifdef FIX_ALIGNMENT + /* align destination */ + .p2align 4 +.Lbad_alignment: + movl $8,%r9d + subl %ecx,%r9d + movl %r9d,%ecx + cmpq %r9,%rdx + jz .Lhandle_7 + js .Lhandle_7 +.Lalign_1: +.Ls11: movb (%rsi),%bl +.Ld11: movb %bl,(%rdi) + incq %rsi + incq %rdi + decl %ecx + jnz .Lalign_1 + subq %r9,%rdx + jmp .Lafter_bad_alignment +#endif + + /* table sorted by exception address */ + .section __ex_table,"a" + .align 8 + .quad .Ls1,.Ls1e + .quad .Ls2,.Ls2e + .quad .Ls3,.Ls3e + .quad .Ls4,.Ls4e + .quad .Ld1,.Ls1e + .quad .Ld2,.Ls2e + .quad .Ld3,.Ls3e + .quad .Ld4,.Ls4e + .quad .Ls5,.Ls5e + .quad .Ls6,.Ls6e + .quad .Ls7,.Ls7e + .quad .Ls8,.Ls8e + .quad .Ld5,.Ls5e + .quad .Ld6,.Ls6e + .quad .Ld7,.Ls7e + .quad .Ld8,.Ls8e + .quad .Ls9,.Le_quad + .quad .Ld9,.Le_quad + .quad .Ls10,.Le_byte + .quad .Ld10,.Le_byte +#ifdef FIX_ALIGNMENT + .quad .Ls11,.Lzero_rest + .quad .Ld11,.Lzero_rest +#endif + .quad .Le5,.Le_zero + .previous + + /* compute 64-offset for main loop. 8 bytes accuracy with error on the + pessimistic side. this is gross. it would be better to fix the + interface. */ + /* eax: zero, ebx: 64 */ +.Ls1e: addl $8,%eax +.Ls2e: addl $8,%eax +.Ls3e: addl $8,%eax +.Ls4e: addl $8,%eax +.Ls5e: addl $8,%eax +.Ls6e: addl $8,%eax +.Ls7e: addl $8,%eax +.Ls8e: addl $8,%eax + addq %rbx,%rdi /* +64 */ + subq %rax,%rdi /* correct destination with computed offset */ + + shlq $6,%rdx /* loop counter * 64 (stride length) */ + addq %rax,%rdx /* add offset to loopcnt */ + andl $63,%ecx /* remaining bytes */ + addq %rcx,%rdx /* add them */ + jmp .Lzero_rest + + /* exception on quad word loop in tail handling */ + /* ecx: loopcnt/8, %edx: length, rdi: correct */ +.Le_quad: + shll $3,%ecx + andl $7,%edx + addl %ecx,%edx + /* edx: bytes to zero, rdi: dest, eax:zero */ +.Lzero_rest: + cmpl $0,(%rsp) /* zero flag set? */ + jz .Le_zero + movq %rdx,%rcx +.Le_byte: + xorl %eax,%eax +.Le5: rep + stosb + /* when there is another exception while zeroing the rest just return */ +.Le_zero: + movq %rdx,%rax + jmp .Lende + CFI_ENDPROC +ENDPROC(__copy_user_nocache) + + diff --git a/include/asm-x86_64/uaccess.h b/include/asm-x86_64/uaccess.h index 8079e29..1981f70 100644 --- a/include/asm-x86_64/uaccess.h +++ b/include/asm-x86_64/uaccess.h @@ -367,4 +367,18 @@ __copy_to_user_inatomic(void __user *dst, const void *src, unsigned size) return copy_user_generic((__force void *)dst, src, size); } +#define ARCH_HAS_NOCACHE_UACCESS 1 +extern long __copy_user_nocache(void *dst, const void __user *src, unsigned size, int zerorest); + +static inline int __copy_from_user_nocache(void *dst, const void __user *src, unsigned size) +{ + might_sleep(); + return __copy_user_nocache(dst, (__force void *)src, size, 1); +} + +static inline int __copy_from_user_inatomic_nocache(void *dst, const void __user *src, unsigned size) +{ + return __copy_user_nocache(dst, (__force void *)src, size, 0); +} + #endif /* __X86_64_UACCESS_H */ -- cgit v0.10.2 From 076422d2af7e3d8e72c6e70843f6ea377714b082 Mon Sep 17 00:00:00 2001 From: Amul Shah Date: Tue, 13 Feb 2007 13:26:19 +0100 Subject: [PATCH] x86-64: Allocate the NUMA hash function nodemap dynamically Remove the statically allocated memory to NUMA node hash map in favor of a dynamically allocated memory to node hash map (it is cache aligned). This patch has the nice side effect in that it allows the hash map to grow for systems with large amounts of memory (256GB - 1TB), but suffer from having small PCI space tacked onto the boot node (which is somewhere between 192MB to 512MB on the ES7000). Signed-off-by: Amul Shah Signed-off-by: Andi Kleen Cc: Andi Kleen Cc: Rohit Seth Signed-off-by: Andrew Morton diff --git a/arch/x86_64/kernel/e820.c b/arch/x86_64/kernel/e820.c index 6fe191c..9d67955 100644 --- a/arch/x86_64/kernel/e820.c +++ b/arch/x86_64/kernel/e820.c @@ -83,6 +83,13 @@ static inline int bad_addr(unsigned long *addrp, unsigned long size) return 1; } +#ifdef CONFIG_NUMA + /* NUMA memory to node map */ + if (last >= nodemap_addr && addr < nodemap_addr + nodemap_size) { + *addrp = nodemap_addr + nodemap_size; + return 1; + } +#endif /* XXX ramdisk image here? */ return 0; } diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index 6047724..f330f82 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -444,6 +444,11 @@ void __init setup_arch(char **cmdline_p) /* reserve ebda region */ if (ebda_addr) reserve_bootmem_generic(ebda_addr, ebda_size); +#ifdef CONFIG_NUMA + /* reserve nodemap region */ + if (nodemap_addr) + reserve_bootmem_generic(nodemap_addr, nodemap_size); +#endif #ifdef CONFIG_SMP /* diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c index 2ee2e00..7d9c428 100644 --- a/arch/x86_64/mm/numa.c +++ b/arch/x86_64/mm/numa.c @@ -36,6 +36,8 @@ unsigned char apicid_to_node[MAX_LOCAL_APIC] __cpuinitdata = { cpumask_t node_to_cpumask[MAX_NUMNODES] __read_mostly; int numa_off __initdata; +unsigned long __initdata nodemap_addr; +unsigned long __initdata nodemap_size; /* @@ -52,34 +54,87 @@ populate_memnodemap(const struct bootnode *nodes, int numnodes, int shift) int res = -1; unsigned long addr, end; - if (shift >= 64) - return -1; - memset(memnodemap, 0xff, sizeof(memnodemap)); + memset(memnodemap, 0xff, memnodemapsize); for (i = 0; i < numnodes; i++) { addr = nodes[i].start; end = nodes[i].end; if (addr >= end) continue; - if ((end >> shift) >= NODEMAPSIZE) + if ((end >> shift) >= memnodemapsize) return 0; do { if (memnodemap[addr >> shift] != 0xff) return -1; memnodemap[addr >> shift] = i; - addr += (1UL << shift); + addr += (1UL << shift); } while (addr < end); res = 1; } return res; } -int __init compute_hash_shift(struct bootnode *nodes, int numnodes) +static int __init allocate_cachealigned_memnodemap(void) +{ + unsigned long pad, pad_addr; + + memnodemap = memnode.embedded_map; + if (memnodemapsize <= 48) { + printk(KERN_DEBUG "NUMA: Allocated memnodemap from %lx - %lx\n", + nodemap_addr, nodemap_addr + nodemap_size); + return 0; + } + + pad = L1_CACHE_BYTES - 1; + pad_addr = 0x8000; + nodemap_size = pad + memnodemapsize; + nodemap_addr = find_e820_area(pad_addr, end_pfn<= 0) - shift++; + for (i = 0; i < numnodes; i++) { + start = nodes[i].start; + end = nodes[i].end; + if (start >= end) + continue; + bitfield |= start | end; + if (end > memtop) + memtop = end; + } + i = find_first_bit(&bitfield, sizeof(unsigned long)*8); + memnodemapsize = (memtop >> i)+1; + return i; +} + +int __init compute_hash_shift(struct bootnode *nodes, int numnodes) +{ + int shift; + shift = extract_lsb_from_nodes(nodes, numnodes); + if (allocate_cachealigned_memnodemap()) + return -1; printk(KERN_DEBUG "NUMA: Using %d for the hash shift.\n", shift); @@ -290,6 +345,7 @@ void __init numa_initmem_init(unsigned long start_pfn, unsigned long end_pfn) end_pfn << PAGE_SHIFT); /* setup dummy node covering all memory */ memnode_shift = 63; + memnodemap = memnode.embedded_map; memnodemap[0] = 0; nodes_clear(node_online_map); node_set_online(0); diff --git a/include/asm-x86_64/e820.h b/include/asm-x86_64/e820.h index fa20867..855fb4a 100644 --- a/include/asm-x86_64/e820.h +++ b/include/asm-x86_64/e820.h @@ -56,6 +56,7 @@ extern void finish_e820_parsing(void); extern struct e820map e820; extern unsigned ebda_addr, ebda_size; +extern unsigned long nodemap_addr, nodemap_size; #endif/*!__ASSEMBLY__*/ #endif/*__E820_HEADER*/ diff --git a/include/asm-x86_64/mmzone.h b/include/asm-x86_64/mmzone.h index c38ebdf..39ef106 100644 --- a/include/asm-x86_64/mmzone.h +++ b/include/asm-x86_64/mmzone.h @@ -11,24 +11,25 @@ #include -/* Should really switch to dynamic allocation at some point */ -#define NODEMAPSIZE 0x4fff - /* Simple perfect hash to map physical addresses to node numbers */ struct memnode { int shift; - u8 map[NODEMAPSIZE]; -} ____cacheline_aligned; + unsigned int mapsize; + u8 *map; + u8 embedded_map[64-16]; +} ____cacheline_aligned; /* total size = 64 bytes */ extern struct memnode memnode; #define memnode_shift memnode.shift #define memnodemap memnode.map +#define memnodemapsize memnode.mapsize extern struct pglist_data *node_data[]; static inline __attribute__((pure)) int phys_to_nid(unsigned long addr) { unsigned nid; - VIRTUAL_BUG_ON((addr >> memnode_shift) >= NODEMAPSIZE); + VIRTUAL_BUG_ON(!memnodemap); + VIRTUAL_BUG_ON((addr >> memnode_shift) >= memnodemapsize); nid = memnodemap[addr >> memnode_shift]; VIRTUAL_BUG_ON(nid >= MAX_NUMNODES || !node_data[nid]); return nid; -- cgit v0.10.2 From 54413927f022292aeccadd268fbf1c0b42129945 Mon Sep 17 00:00:00 2001 From: Amul Shah Date: Tue, 13 Feb 2007 13:26:20 +0100 Subject: [PATCH] x86-64: x86_64-make-the-numa-hash-function-nodemap-allocation fix fix - Removed an extraneous debug message from allocate_cachealigned_map - Changed extract_lsb_from_nodes to return 63 for the case where there was only one memory node. The prevents the creation of the dynamic hashmap. - Changed extract_lsb_from_nodes to use only the starting memory address of a node. On an ES7000, our nodes overlap the starting and ending address, meaning, that we see nodes like 00000 - 10000 10000 - 20000 But other systems have nodes whose start and end addresses do not overlap. For example: 00000 - 0FFFF 10000 - 1FFFF In this case, using the ending address will result in an LSB much lower than what is possible. In this case an LSB of 1 when in reality it should be 16. Cc: Andi Kleen Cc: Rohit Seth Signed-off-by: Andrew Morton Signed-off-by: Andi Kleen diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c index 7d9c428..1ec16ea 100644 --- a/arch/x86_64/mm/numa.c +++ b/arch/x86_64/mm/numa.c @@ -78,11 +78,8 @@ static int __init allocate_cachealigned_memnodemap(void) unsigned long pad, pad_addr; memnodemap = memnode.embedded_map; - if (memnodemapsize <= 48) { - printk(KERN_DEBUG "NUMA: Allocated memnodemap from %lx - %lx\n", - nodemap_addr, nodemap_addr + nodemap_size); + if (memnodemapsize <= 48) return 0; - } pad = L1_CACHE_BYTES - 1; pad_addr = 0x8000; @@ -110,7 +107,7 @@ static int __init allocate_cachealigned_memnodemap(void) static int __init extract_lsb_from_nodes (const struct bootnode *nodes, int numnodes) { - int i; + int i, nodes_used = 0; unsigned long start, end; unsigned long bitfield = 0, memtop = 0; @@ -119,11 +116,15 @@ extract_lsb_from_nodes (const struct bootnode *nodes, int numnodes) end = nodes[i].end; if (start >= end) continue; - bitfield |= start | end; + bitfield |= start; + nodes_used++; if (end > memtop) memtop = end; } - i = find_first_bit(&bitfield, sizeof(unsigned long)*8); + if (nodes_used <= 1) + i = 63; + else + i = find_first_bit(&bitfield, sizeof(unsigned long)*8); memnodemapsize = (memtop >> i)+1; return i; } -- cgit v0.10.2 From 464d1a78fbf8cf6c7fd970e7b3e2db50a320ce28 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Tue, 13 Feb 2007 13:26:20 +0100 Subject: [PATCH] i386: Convert i386 PDA code to use %fs Convert the PDA code to use %fs rather than %gs as the segment for per-processor data. This is because some processors show a small but measurable performance gain for reloading a NULL segment selector (as %fs generally is in user-space) versus a non-NULL one (as %gs generally is). On modern processors the difference is very small, perhaps undetectable. Some old AMD "K6 3D+" processors are noticably slower when %fs is used rather than %gs; I have no idea why this might be, but I think they're sufficiently rare that it doesn't matter much. This patch also fixes the math emulator, which had not been adjusted to match the changed struct pt_regs. [frederik.deweerdt@gmail.com: fixit with gdb] [mingo@elte.hu: Fix KVM too] Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Andi Kleen Cc: Ian Campbell Acked-by: Ingo Molnar Acked-by: Zachary Amsden Cc: Eric Dumazet Signed-off-by: Frederik Deweerdt Signed-off-by: Andrew Morton diff --git a/arch/i386/kernel/asm-offsets.c b/arch/i386/kernel/asm-offsets.c index 1b2f3cd..c375351 100644 --- a/arch/i386/kernel/asm-offsets.c +++ b/arch/i386/kernel/asm-offsets.c @@ -72,7 +72,7 @@ void foo(void) OFFSET(PT_EAX, pt_regs, eax); OFFSET(PT_DS, pt_regs, xds); OFFSET(PT_ES, pt_regs, xes); - OFFSET(PT_GS, pt_regs, xgs); + OFFSET(PT_FS, pt_regs, xfs); OFFSET(PT_ORIG_EAX, pt_regs, orig_eax); OFFSET(PT_EIP, pt_regs, eip); OFFSET(PT_CS, pt_regs, xcs); diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c index 8a8bbda..dcbbd0a 100644 --- a/arch/i386/kernel/cpu/common.c +++ b/arch/i386/kernel/cpu/common.c @@ -605,7 +605,7 @@ void __init early_cpu_init(void) struct pt_regs * __devinit idle_regs(struct pt_regs *regs) { memset(regs, 0, sizeof(struct pt_regs)); - regs->xgs = __KERNEL_PDA; + regs->xfs = __KERNEL_PDA; return regs; } @@ -662,12 +662,12 @@ struct i386_pda boot_pda = { .pcurrent = &init_task, }; -static inline void set_kernel_gs(void) +static inline void set_kernel_fs(void) { - /* Set %gs for this CPU's PDA. Memory clobber is to create a + /* Set %fs for this CPU's PDA. Memory clobber is to create a barrier with respect to any PDA operations, so the compiler doesn't move any before here. */ - asm volatile ("mov %0, %%gs" : : "r" (__KERNEL_PDA) : "memory"); + asm volatile ("mov %0, %%fs" : : "r" (__KERNEL_PDA) : "memory"); } /* Initialize the CPU's GDT and PDA. The boot CPU does this for @@ -718,7 +718,7 @@ void __cpuinit cpu_set_gdt(int cpu) the boot CPU, this will transition from the boot gdt+pda to the real ones). */ load_gdt(cpu_gdt_descr); - set_kernel_gs(); + set_kernel_fs(); } /* Common CPU init for both boot and secondary CPUs */ @@ -764,8 +764,8 @@ static void __cpuinit _cpu_init(int cpu, struct task_struct *curr) __set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss); #endif - /* Clear %fs. */ - asm volatile ("mov %0, %%fs" : : "r" (0)); + /* Clear %gs. */ + asm volatile ("mov %0, %%gs" : : "r" (0)); /* Clear all 6 debug registers: */ set_debugreg(0, 0); diff --git a/arch/i386/kernel/entry.S b/arch/i386/kernel/entry.S index 5e47683..8c6a22a 100644 --- a/arch/i386/kernel/entry.S +++ b/arch/i386/kernel/entry.S @@ -30,7 +30,7 @@ * 18(%esp) - %eax * 1C(%esp) - %ds * 20(%esp) - %es - * 24(%esp) - %gs + * 24(%esp) - %fs * 28(%esp) - orig_eax * 2C(%esp) - %eip * 30(%esp) - %cs @@ -99,9 +99,9 @@ VM_MASK = 0x00020000 #define SAVE_ALL \ cld; \ - pushl %gs; \ + pushl %fs; \ CFI_ADJUST_CFA_OFFSET 4;\ - /*CFI_REL_OFFSET gs, 0;*/\ + /*CFI_REL_OFFSET fs, 0;*/\ pushl %es; \ CFI_ADJUST_CFA_OFFSET 4;\ /*CFI_REL_OFFSET es, 0;*/\ @@ -133,7 +133,7 @@ VM_MASK = 0x00020000 movl %edx, %ds; \ movl %edx, %es; \ movl $(__KERNEL_PDA), %edx; \ - movl %edx, %gs + movl %edx, %fs #define RESTORE_INT_REGS \ popl %ebx; \ @@ -166,9 +166,9 @@ VM_MASK = 0x00020000 2: popl %es; \ CFI_ADJUST_CFA_OFFSET -4;\ /*CFI_RESTORE es;*/\ -3: popl %gs; \ +3: popl %fs; \ CFI_ADJUST_CFA_OFFSET -4;\ - /*CFI_RESTORE gs;*/\ + /*CFI_RESTORE fs;*/\ .pushsection .fixup,"ax"; \ 4: movl $0,(%esp); \ jmp 1b; \ @@ -349,11 +349,11 @@ sysenter_past_esp: movl PT_OLDESP(%esp), %ecx xorl %ebp,%ebp TRACE_IRQS_ON -1: mov PT_GS(%esp), %gs +1: mov PT_FS(%esp), %fs ENABLE_INTERRUPTS_SYSEXIT CFI_ENDPROC .pushsection .fixup,"ax" -2: movl $0,PT_GS(%esp) +2: movl $0,PT_FS(%esp) jmp 1b .section __ex_table,"a" .align 4 @@ -550,7 +550,7 @@ syscall_badsys: #define FIXUP_ESPFIX_STACK \ /* since we are on a wrong stack, we cant make it a C code :( */ \ - movl %gs:PDA_cpu, %ebx; \ + movl %fs:PDA_cpu, %ebx; \ PER_CPU(cpu_gdt_descr, %ebx); \ movl GDS_address(%ebx), %ebx; \ GET_DESC_BASE(GDT_ENTRY_ESPFIX_SS, %ebx, %eax, %ax, %al, %ah); \ @@ -632,7 +632,7 @@ KPROBE_ENTRY(page_fault) CFI_ADJUST_CFA_OFFSET 4 ALIGN error_code: - /* the function address is in %gs's slot on the stack */ + /* the function address is in %fs's slot on the stack */ pushl %es CFI_ADJUST_CFA_OFFSET 4 /*CFI_REL_OFFSET es, 0*/ @@ -661,20 +661,20 @@ error_code: CFI_ADJUST_CFA_OFFSET 4 CFI_REL_OFFSET ebx, 0 cld - pushl %gs + pushl %fs CFI_ADJUST_CFA_OFFSET 4 - /*CFI_REL_OFFSET gs, 0*/ + /*CFI_REL_OFFSET fs, 0*/ movl $(__KERNEL_PDA), %ecx - movl %ecx, %gs + movl %ecx, %fs UNWIND_ESPFIX_STACK popl %ecx CFI_ADJUST_CFA_OFFSET -4 /*CFI_REGISTER es, ecx*/ - movl PT_GS(%esp), %edi # get the function address + movl PT_FS(%esp), %edi # get the function address movl PT_ORIG_EAX(%esp), %edx # get the error code movl $-1, PT_ORIG_EAX(%esp) # no syscall to restart - mov %ecx, PT_GS(%esp) - /*CFI_REL_OFFSET gs, ES*/ + mov %ecx, PT_FS(%esp) + /*CFI_REL_OFFSET fs, ES*/ movl $(__USER_DS), %ecx movl %ecx, %ds movl %ecx, %es diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S index cb9abdf..15336c8 100644 --- a/arch/i386/kernel/head.S +++ b/arch/i386/kernel/head.S @@ -319,12 +319,12 @@ is386: movl $2,%ecx # set MP movl %eax,%ds movl %eax,%es - xorl %eax,%eax # Clear FS and LDT - movl %eax,%fs + xorl %eax,%eax # Clear GS and LDT + movl %eax,%gs lldt %ax movl $(__KERNEL_PDA),%eax - mov %eax,%gs + mov %eax,%fs cld # gcc2 wants the direction flag cleared at all times pushl $0 # fake return address for unwinder diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index af1d533..b85cfa3 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -363,7 +363,7 @@ no_kprobe: " pushf\n" /* skip cs, eip, orig_eax */ " subl $12, %esp\n" - " pushl %gs\n" + " pushl %fs\n" " pushl %ds\n" " pushl %es\n" " pushl %eax\n" @@ -387,7 +387,7 @@ no_kprobe: " popl %edi\n" " popl %ebp\n" " popl %eax\n" - /* skip eip, orig_eax, es, ds, gs */ + /* skip eip, orig_eax, es, ds, fs */ " addl $20, %esp\n" " popf\n" " ret\n"); diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c index c641056..23ae198 100644 --- a/arch/i386/kernel/process.c +++ b/arch/i386/kernel/process.c @@ -308,8 +308,8 @@ void show_regs(struct pt_regs * regs) regs->eax,regs->ebx,regs->ecx,regs->edx); printk("ESI: %08lx EDI: %08lx EBP: %08lx", regs->esi, regs->edi, regs->ebp); - printk(" DS: %04x ES: %04x GS: %04x\n", - 0xffff & regs->xds,0xffff & regs->xes, 0xffff & regs->xgs); + printk(" DS: %04x ES: %04x FS: %04x\n", + 0xffff & regs->xds,0xffff & regs->xes, 0xffff & regs->xfs); cr0 = read_cr0(); cr2 = read_cr2(); @@ -340,7 +340,7 @@ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) regs.xds = __USER_DS; regs.xes = __USER_DS; - regs.xgs = __KERNEL_PDA; + regs.xfs = __KERNEL_PDA; regs.orig_eax = -1; regs.eip = (unsigned long) kernel_thread_helper; regs.xcs = __KERNEL_CS | get_kernel_rpl(); @@ -425,7 +425,7 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long esp, p->thread.eip = (unsigned long) ret_from_fork; - savesegment(fs,p->thread.fs); + savesegment(gs,p->thread.gs); tsk = current; if (unlikely(test_tsk_thread_flag(tsk, TIF_IO_BITMAP))) { @@ -501,8 +501,8 @@ void dump_thread(struct pt_regs * regs, struct user * dump) dump->regs.eax = regs->eax; dump->regs.ds = regs->xds; dump->regs.es = regs->xes; - savesegment(fs,dump->regs.fs); - dump->regs.gs = regs->xgs; + dump->regs.fs = regs->xfs; + savesegment(gs,dump->regs.gs); dump->regs.orig_eax = regs->orig_eax; dump->regs.eip = regs->eip; dump->regs.cs = regs->xcs; @@ -653,7 +653,7 @@ struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct tas load_esp0(tss, next); /* - * Save away %fs. No need to save %gs, as it was saved on the + * Save away %gs. No need to save %fs, as it was saved on the * stack on entry. No need to save %es and %ds, as those are * always kernel segments while inside the kernel. Doing this * before setting the new TLS descriptors avoids the situation @@ -662,7 +662,7 @@ struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct tas * used %fs or %gs (it does not today), or if the kernel is * running inside of a hypervisor layer. */ - savesegment(fs, prev->fs); + savesegment(gs, prev->gs); /* * Load the per-thread Thread-Local Storage descriptor. @@ -670,12 +670,10 @@ struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct tas load_TLS(next, cpu); /* - * Restore %fs if needed. - * - * Glibc normally makes %fs be zero. + * Restore %gs if needed (which is common) */ - if (unlikely(prev->fs | next->fs)) - loadsegment(fs, next->fs); + if (prev->gs | next->gs) + loadsegment(gs, next->gs); write_pda(pcurrent, next_p); diff --git a/arch/i386/kernel/ptrace.c b/arch/i386/kernel/ptrace.c index af8aabe..4a8f8a2 100644 --- a/arch/i386/kernel/ptrace.c +++ b/arch/i386/kernel/ptrace.c @@ -89,14 +89,14 @@ static int putreg(struct task_struct *child, unsigned long regno, unsigned long value) { switch (regno >> 2) { - case FS: + case GS: if (value && (value & 3) != 3) return -EIO; - child->thread.fs = value; + child->thread.gs = value; return 0; case DS: case ES: - case GS: + case FS: if (value && (value & 3) != 3) return -EIO; value &= 0xffff; @@ -112,7 +112,7 @@ static int putreg(struct task_struct *child, value |= get_stack_long(child, EFL_OFFSET) & ~FLAG_MASK; break; } - if (regno > ES*4) + if (regno > FS*4) regno -= 1*4; put_stack_long(child, regno, value); return 0; @@ -124,18 +124,18 @@ static unsigned long getreg(struct task_struct *child, unsigned long retval = ~0UL; switch (regno >> 2) { - case FS: - retval = child->thread.fs; + case GS: + retval = child->thread.gs; break; case DS: case ES: - case GS: + case FS: case SS: case CS: retval = 0xffff; /* fall through */ default: - if (regno > ES*4) + if (regno > FS*4) regno -= 1*4; retval &= get_stack_long(child, regno); } diff --git a/arch/i386/kernel/signal.c b/arch/i386/kernel/signal.c index 65d7620..8f4afcc 100644 --- a/arch/i386/kernel/signal.c +++ b/arch/i386/kernel/signal.c @@ -128,8 +128,8 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *peax X86_EFLAGS_TF | X86_EFLAGS_SF | X86_EFLAGS_ZF | \ X86_EFLAGS_AF | X86_EFLAGS_PF | X86_EFLAGS_CF) - COPY_SEG(gs); - GET_SEG(fs); + GET_SEG(gs); + COPY_SEG(fs); COPY_SEG(es); COPY_SEG(ds); COPY(edi); @@ -244,9 +244,9 @@ setup_sigcontext(struct sigcontext __user *sc, struct _fpstate __user *fpstate, { int tmp, err = 0; - err |= __put_user(regs->xgs, (unsigned int __user *)&sc->gs); - savesegment(fs, tmp); - err |= __put_user(tmp, (unsigned int __user *)&sc->fs); + err |= __put_user(regs->xfs, (unsigned int __user *)&sc->fs); + savesegment(gs, tmp); + err |= __put_user(tmp, (unsigned int __user *)&sc->gs); err |= __put_user(regs->xes, (unsigned int __user *)&sc->es); err |= __put_user(regs->xds, (unsigned int __user *)&sc->ds); diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c index 0efad8a..4ec2103 100644 --- a/arch/i386/kernel/traps.c +++ b/arch/i386/kernel/traps.c @@ -291,10 +291,11 @@ void show_registers(struct pt_regs *regs) int i; int in_kernel = 1; unsigned long esp; - unsigned short ss; + unsigned short ss, gs; esp = (unsigned long) (®s->esp); savesegment(ss, ss); + savesegment(gs, gs); if (user_mode_vm(regs)) { in_kernel = 0; esp = regs->esp; @@ -313,8 +314,8 @@ void show_registers(struct pt_regs *regs) regs->eax, regs->ebx, regs->ecx, regs->edx); printk(KERN_EMERG "esi: %08lx edi: %08lx ebp: %08lx esp: %08lx\n", regs->esi, regs->edi, regs->ebp, esp); - printk(KERN_EMERG "ds: %04x es: %04x ss: %04x\n", - regs->xds & 0xffff, regs->xes & 0xffff, ss); + printk(KERN_EMERG "ds: %04x es: %04x fs: %04x gs: %04x ss: %04x\n", + regs->xds & 0xffff, regs->xes & 0xffff, regs->xfs & 0xffff, gs, ss); printk(KERN_EMERG "Process %.*s (pid: %d, ti=%p task=%p task.ti=%p)", TASK_COMM_LEN, current->comm, current->pid, current_thread_info(), current, current->thread_info); diff --git a/arch/i386/kernel/vm86.c b/arch/i386/kernel/vm86.c index be2f96e..d1b8f2b 100644 --- a/arch/i386/kernel/vm86.c +++ b/arch/i386/kernel/vm86.c @@ -96,12 +96,12 @@ static int copy_vm86_regs_to_user(struct vm86_regs __user *user, { int ret = 0; - /* kernel_vm86_regs is missing xfs, so copy everything up to - (but not including) xgs, and then rest after xgs. */ - ret += copy_to_user(user, regs, offsetof(struct kernel_vm86_regs, pt.xgs)); - ret += copy_to_user(&user->__null_gs, ®s->pt.xgs, + /* kernel_vm86_regs is missing xgs, so copy everything up to + (but not including) orig_eax, and then rest including orig_eax. */ + ret += copy_to_user(user, regs, offsetof(struct kernel_vm86_regs, pt.orig_eax)); + ret += copy_to_user(&user->orig_eax, ®s->pt.orig_eax, sizeof(struct kernel_vm86_regs) - - offsetof(struct kernel_vm86_regs, pt.xgs)); + offsetof(struct kernel_vm86_regs, pt.orig_eax)); return ret; } @@ -113,12 +113,13 @@ static int copy_vm86_regs_from_user(struct kernel_vm86_regs *regs, { int ret = 0; - ret += copy_from_user(regs, user, offsetof(struct kernel_vm86_regs, pt.xgs)); - ret += copy_from_user(®s->pt.xgs, &user->__null_gs, + /* copy eax-xfs inclusive */ + ret += copy_from_user(regs, user, offsetof(struct kernel_vm86_regs, pt.orig_eax)); + /* copy orig_eax-__gsh+extra */ + ret += copy_from_user(®s->pt.orig_eax, &user->orig_eax, sizeof(struct kernel_vm86_regs) - - offsetof(struct kernel_vm86_regs, pt.xgs) + + offsetof(struct kernel_vm86_regs, pt.orig_eax) + extra); - return ret; } @@ -157,8 +158,8 @@ struct pt_regs * fastcall save_v86_state(struct kernel_vm86_regs * regs) ret = KVM86->regs32; - loadsegment(fs, current->thread.saved_fs); - ret->xgs = current->thread.saved_gs; + ret->xfs = current->thread.saved_fs; + loadsegment(gs, current->thread.saved_gs); return ret; } @@ -285,9 +286,9 @@ static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk */ info->regs.pt.xds = 0; info->regs.pt.xes = 0; - info->regs.pt.xgs = 0; + info->regs.pt.xfs = 0; -/* we are clearing fs later just before "jmp resume_userspace", +/* we are clearing gs later just before "jmp resume_userspace", * because it is not saved/restored. */ @@ -321,8 +322,8 @@ static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk */ info->regs32->eax = 0; tsk->thread.saved_esp0 = tsk->thread.esp0; - savesegment(fs, tsk->thread.saved_fs); - tsk->thread.saved_gs = info->regs32->xgs; + tsk->thread.saved_fs = info->regs32->xfs; + savesegment(gs, tsk->thread.saved_gs); tss = &per_cpu(init_tss, get_cpu()); tsk->thread.esp0 = (unsigned long) &info->VM86_TSS_ESP0; @@ -342,7 +343,7 @@ static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk __asm__ __volatile__( "movl %0,%%esp\n\t" "movl %1,%%ebp\n\t" - "mov %2, %%fs\n\t" + "mov %2, %%gs\n\t" "jmp resume_userspace" : /* no outputs */ :"r" (&info->regs), "r" (task_thread_info(tsk)), "r" (0)); diff --git a/arch/i386/math-emu/get_address.c b/arch/i386/math-emu/get_address.c index 9819b70..2e2c51a 100644 --- a/arch/i386/math-emu/get_address.c +++ b/arch/i386/math-emu/get_address.c @@ -56,15 +56,14 @@ static int reg_offset_vm86[] = { #define VM86_REG_(x) (*(unsigned short *) \ (reg_offset_vm86[((unsigned)x)]+(u_char *) FPU_info)) -/* These are dummy, fs and gs are not saved on the stack. */ -#define ___FS ___ds +/* This dummy, gs is not saved on the stack. */ #define ___GS ___ds static int reg_offset_pm[] = { offsetof(struct info,___cs), offsetof(struct info,___ds), offsetof(struct info,___es), - offsetof(struct info,___FS), + offsetof(struct info,___fs), offsetof(struct info,___GS), offsetof(struct info,___ss), offsetof(struct info,___ds) @@ -169,13 +168,10 @@ static long pm_address(u_char FPU_modrm, u_char segment, switch ( segment ) { - /* fs and gs aren't used by the kernel, so they still have their - user-space values. */ - case PREFIX_FS_-1: - /* N.B. - movl %seg, mem is a 2 byte write regardless of prefix */ - savesegment(fs, addr->selector); - break; + /* gs isn't used by the kernel, so it still has its + user-space value. */ case PREFIX_GS_-1: + /* N.B. - movl %seg, mem is a 2 byte write regardless of prefix */ savesegment(gs, addr->selector); break; default: diff --git a/drivers/kvm/vmx.c b/drivers/kvm/vmx.c index 1e640b8..fd4e9173 100644 --- a/drivers/kvm/vmx.c +++ b/drivers/kvm/vmx.c @@ -1879,12 +1879,6 @@ again: asm ("mov %0, %%ds; mov %0, %%es" : : "r"(__USER_DS)); - /* - * Profile KVM exit RIPs: - */ - if (unlikely(prof_on == KVM_PROFILING)) - profile_hit(KVM_PROFILING, (void *)vmcs_readl(GUEST_RIP)); - kvm_run->exit_type = 0; if (fail) { kvm_run->exit_type = KVM_EXIT_TYPE_FAIL_ENTRY; @@ -1907,6 +1901,12 @@ again: reload_tss(); } + /* + * Profile KVM exit RIPs: + */ + if (unlikely(prof_on == KVM_PROFILING)) + profile_hit(KVM_PROFILING, (void *)vmcs_readl(GUEST_RIP)); + vcpu->launched = 1; kvm_run->exit_type = KVM_EXIT_TYPE_VM_EXIT; r = kvm_handle_exit(kvm_run, vcpu); diff --git a/include/asm-i386/elf.h b/include/asm-i386/elf.h index 369035d..8d33c9b 100644 --- a/include/asm-i386/elf.h +++ b/include/asm-i386/elf.h @@ -90,8 +90,8 @@ typedef struct user_fxsr_struct elf_fpxregset_t; pr_reg[6] = regs->eax; \ pr_reg[7] = regs->xds; \ pr_reg[8] = regs->xes; \ - savesegment(fs,pr_reg[9]); \ - pr_reg[10] = regs->xgs; \ + pr_reg[9] = regs->xfs; \ + savesegment(gs,pr_reg[10]); \ pr_reg[11] = regs->orig_eax; \ pr_reg[12] = regs->eip; \ pr_reg[13] = regs->xcs; \ diff --git a/include/asm-i386/mmu_context.h b/include/asm-i386/mmu_context.h index 68ff102..e6aa30f 100644 --- a/include/asm-i386/mmu_context.h +++ b/include/asm-i386/mmu_context.h @@ -63,7 +63,7 @@ static inline void switch_mm(struct mm_struct *prev, } #define deactivate_mm(tsk, mm) \ - asm("movl %0,%%fs": :"r" (0)); + asm("movl %0,%%gs": :"r" (0)); #define activate_mm(prev, next) \ switch_mm((prev),(next),NULL) diff --git a/include/asm-i386/pda.h b/include/asm-i386/pda.h index 2ba2736..b12d59a 100644 --- a/include/asm-i386/pda.h +++ b/include/asm-i386/pda.h @@ -39,19 +39,19 @@ extern struct i386_pda _proxy_pda; if (0) { T__ tmp__; tmp__ = (val); } \ switch (sizeof(_proxy_pda.field)) { \ case 1: \ - asm(op "b %1,%%gs:%c2" \ + asm(op "b %1,%%fs:%c2" \ : "+m" (_proxy_pda.field) \ :"ri" ((T__)val), \ "i"(pda_offset(field))); \ break; \ case 2: \ - asm(op "w %1,%%gs:%c2" \ + asm(op "w %1,%%fs:%c2" \ : "+m" (_proxy_pda.field) \ :"ri" ((T__)val), \ "i"(pda_offset(field))); \ break; \ case 4: \ - asm(op "l %1,%%gs:%c2" \ + asm(op "l %1,%%fs:%c2" \ : "+m" (_proxy_pda.field) \ :"ri" ((T__)val), \ "i"(pda_offset(field))); \ @@ -65,19 +65,19 @@ extern struct i386_pda _proxy_pda; typeof(_proxy_pda.field) ret__; \ switch (sizeof(_proxy_pda.field)) { \ case 1: \ - asm(op "b %%gs:%c1,%0" \ + asm(op "b %%fs:%c1,%0" \ : "=r" (ret__) \ : "i" (pda_offset(field)), \ "m" (_proxy_pda.field)); \ break; \ case 2: \ - asm(op "w %%gs:%c1,%0" \ + asm(op "w %%fs:%c1,%0" \ : "=r" (ret__) \ : "i" (pda_offset(field)), \ "m" (_proxy_pda.field)); \ break; \ case 4: \ - asm(op "l %%gs:%c1,%0" \ + asm(op "l %%fs:%c1,%0" \ : "=r" (ret__) \ : "i" (pda_offset(field)), \ "m" (_proxy_pda.field)); \ diff --git a/include/asm-i386/processor.h b/include/asm-i386/processor.h index 359f10b..11bf899 100644 --- a/include/asm-i386/processor.h +++ b/include/asm-i386/processor.h @@ -424,7 +424,7 @@ struct thread_struct { .vm86_info = NULL, \ .sysenter_cs = __KERNEL_CS, \ .io_bitmap_ptr = NULL, \ - .gs = __KERNEL_PDA, \ + .fs = __KERNEL_PDA, \ } /* @@ -442,8 +442,8 @@ struct thread_struct { } #define start_thread(regs, new_eip, new_esp) do { \ - __asm__("movl %0,%%fs": :"r" (0)); \ - regs->xgs = 0; \ + __asm__("movl %0,%%gs": :"r" (0)); \ + regs->xfs = 0; \ set_fs(USER_DS); \ regs->xds = __USER_DS; \ regs->xes = __USER_DS; \ diff --git a/include/asm-i386/ptrace.h b/include/asm-i386/ptrace.h index bdbc894..1646996 100644 --- a/include/asm-i386/ptrace.h +++ b/include/asm-i386/ptrace.h @@ -16,8 +16,8 @@ struct pt_regs { long eax; int xds; int xes; - /* int xfs; */ - int xgs; + int xfs; + /* int xgs; */ long orig_eax; long eip; int xcs; -- cgit v0.10.2 From 2e188938ab2358034801938c2329b016ca135823 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Tue, 13 Feb 2007 13:26:20 +0100 Subject: [PATCH] i386: Fix a typo in an IRQ handler name The "fasteoi" IRQ handler is named "fasteio" incorrectly. This is a fix. Signed-off-by: Maciej W. Rozycki Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index ba8d302..1711f4e 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -2310,7 +2310,7 @@ static inline void __init check_timer(void) disable_8259A_irq(0); set_irq_chip_and_handler_name(0, &lapic_chip, handle_fasteoi_irq, - "fasteio"); + "fasteoi"); apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */ enable_8259A_irq(0); -- cgit v0.10.2 From b78673944b22b662b270c8bba5c198f19e4ee4e1 Mon Sep 17 00:00:00 2001 From: Olivier Galibert Date: Tue, 13 Feb 2007 13:26:20 +0100 Subject: [PATCH] mmconfig: Share parts of mmconfig code between i386 and x86-64 i386 and x86-64 pci mmconfig code have a lot in common. So share what's shareable between the two. Signed-off-by: Olivier Galibert Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton diff --git a/arch/i386/pci/Makefile b/arch/i386/pci/Makefile index 1594d2f..44650e0 100644 --- a/arch/i386/pci/Makefile +++ b/arch/i386/pci/Makefile @@ -1,7 +1,7 @@ obj-y := i386.o init.o obj-$(CONFIG_PCI_BIOS) += pcbios.o -obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o +obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o mmconfig-shared.o obj-$(CONFIG_PCI_DIRECT) += direct.o pci-y := fixup.o diff --git a/arch/i386/pci/mmconfig-shared.c b/arch/i386/pci/mmconfig-shared.c new file mode 100644 index 0000000..998e04f --- /dev/null +++ b/arch/i386/pci/mmconfig-shared.c @@ -0,0 +1,86 @@ +/* + * mmconfig-shared.c - Low-level direct PCI config space access via + * MMCONFIG - common code between i386 and x86-64. + * + * This code does: + * - ACPI decoding and validation + * + * Per-architecture code takes care of the mappings and accesses + * themselves. + */ + +#include +#include +#include +#include +#include + +#include "pci.h" + +/* aperture is up to 256MB but BIOS may reserve less */ +#define MMCONFIG_APER_MIN (2 * 1024*1024) +#define MMCONFIG_APER_MAX (256 * 1024*1024) + +/* Verify the first 16 busses. We assume that systems with more busses + get MCFG right. */ +#define PCI_MMCFG_MAX_CHECK_BUS 16 + +DECLARE_BITMAP(pci_mmcfg_fallback_slots, 32*PCI_MMCFG_MAX_CHECK_BUS); + +/* K8 systems have some devices (typically in the builtin northbridge) + that are only accessible using type1 + Normally this can be expressed in the MCFG by not listing them + and assigning suitable _SEGs, but this isn't implemented in some BIOS. + Instead try to discover all devices on bus 0 that are unreachable using MM + and fallback for them. */ +static __init void unreachable_devices(void) +{ + int i, k; + /* Use the max bus number from ACPI here? */ + for (k = 0; k < PCI_MMCFG_MAX_CHECK_BUS; k++) { + for (i = 0; i < 32; i++) { + u32 val1, val2; + + pci_conf1_read(0, k, PCI_DEVFN(i,0), 0, 4, &val1); + if (val1 == 0xffffffff) + continue; + + raw_pci_ops->read(0, k, PCI_DEVFN(i, 0), 0, 4, &val2); + if (val1 != val2) { + set_bit(i + 32*k, pci_mmcfg_fallback_slots); + printk(KERN_NOTICE "PCI: No mmconfig possible" + " on device %02x:%02x\n", k, i); + } + } + } +} + +void __init pci_mmcfg_init(int type) +{ + if ((pci_probe & PCI_PROBE_MMCONF) == 0) + return; + + acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg); + + if ((pci_mmcfg_config_num == 0) || + (pci_mmcfg_config == NULL) || + (pci_mmcfg_config[0].address == 0)) + return; + + /* Only do this check when type 1 works. If it doesn't work + assume we run on a Mac and always use MCFG */ + if (type == 1 && + !e820_all_mapped(pci_mmcfg_config[0].address, + pci_mmcfg_config[0].address + MMCONFIG_APER_MIN, + E820_RESERVED)) { + printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not E820-reserved\n", + pci_mmcfg_config[0].address); + printk(KERN_ERR "PCI: Not using MMCONFIG.\n"); + return; + } + + if (pci_mmcfg_arch_init()) { + unreachable_devices(); + pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; + } +} diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c index 5700220..97dcaaa 100644 --- a/arch/i386/pci/mmconfig.c +++ b/arch/i386/pci/mmconfig.c @@ -15,21 +15,13 @@ #include #include "pci.h" -/* aperture is up to 256MB but BIOS may reserve less */ -#define MMCONFIG_APER_MIN (2 * 1024*1024) -#define MMCONFIG_APER_MAX (256 * 1024*1024) - /* Assume systems with more busses have correct MCFG */ -#define MAX_CHECK_BUS 16 - #define mmcfg_virt_addr ((void __iomem *) fix_to_virt(FIX_PCIE_MCFG)) /* The base address of the last MMCONFIG device accessed */ static u32 mmcfg_last_accessed_device; static int mmcfg_last_accessed_cpu; -static DECLARE_BITMAP(fallback_slots, MAX_CHECK_BUS*32); - /* * Functions for accessing PCI configuration space with MMCONFIG accesses */ @@ -38,8 +30,8 @@ static u32 get_base_addr(unsigned int seg, int bus, unsigned devfn) int cfg_num = -1; struct acpi_mcfg_allocation *cfg; - if (seg == 0 && bus < MAX_CHECK_BUS && - test_bit(PCI_SLOT(devfn) + 32*bus, fallback_slots)) + if (seg == 0 && bus < PCI_MMCFG_MAX_CHECK_BUS && + test_bit(PCI_SLOT(devfn) + 32*bus, pci_mmcfg_fallback_slots)) return 0; while (1) { @@ -158,67 +150,9 @@ static struct pci_raw_ops pci_mmcfg = { .write = pci_mmcfg_write, }; -/* K8 systems have some devices (typically in the builtin northbridge) - that are only accessible using type1 - Normally this can be expressed in the MCFG by not listing them - and assigning suitable _SEGs, but this isn't implemented in some BIOS. - Instead try to discover all devices on bus 0 that are unreachable using MM - and fallback for them. */ -static __init void unreachable_devices(void) +int __init pci_mmcfg_arch_init(void) { - int i, k; - unsigned long flags; - - for (k = 0; k < MAX_CHECK_BUS; k++) { - for (i = 0; i < 32; i++) { - u32 val1; - u32 addr; - - pci_conf1_read(0, k, PCI_DEVFN(i, 0), 0, 4, &val1); - if (val1 == 0xffffffff) - continue; - - /* Locking probably not needed, but safer */ - spin_lock_irqsave(&pci_config_lock, flags); - addr = get_base_addr(0, k, PCI_DEVFN(i, 0)); - if (addr != 0) - pci_exp_set_dev_base(addr, k, PCI_DEVFN(i, 0)); - if (addr == 0 || - readl((u32 __iomem *)mmcfg_virt_addr) != val1) { - set_bit(i + 32*k, fallback_slots); - printk(KERN_NOTICE - "PCI: No mmconfig possible on %x:%x\n", k, i); - } - spin_unlock_irqrestore(&pci_config_lock, flags); - } - } -} - -void __init pci_mmcfg_init(int type) -{ - if ((pci_probe & PCI_PROBE_MMCONF) == 0) - return; - - acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg); - if ((pci_mmcfg_config_num == 0) || - (pci_mmcfg_config == NULL) || - (pci_mmcfg_config[0].address == 0)) - return; - - /* Only do this check when type 1 works. If it doesn't work - assume we run on a Mac and always use MCFG */ - if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].address, - pci_mmcfg_config[0].address + MMCONFIG_APER_MIN, - E820_RESERVED)) { - printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %lx is not E820-reserved\n", - (unsigned long)pci_mmcfg_config[0].address); - printk(KERN_ERR "PCI: Not using MMCONFIG.\n"); - return; - } - printk(KERN_INFO "PCI: Using MMCONFIG\n"); raw_pci_ops = &pci_mmcfg; - pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; - - unreachable_devices(); + return 1; } diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h index a0a2518..0270c80 100644 --- a/arch/i386/pci/pci.h +++ b/arch/i386/pci/pci.h @@ -94,3 +94,9 @@ extern void pci_pcbios_init(void); extern void pci_mmcfg_init(int type); extern void pcibios_sort(void); +/* pci-mmconfig.c */ + +#define PCI_MMCFG_MAX_CHECK_BUS 16 +extern DECLARE_BITMAP(pci_mmcfg_fallback_slots, 32*PCI_MMCFG_MAX_CHECK_BUS); + +extern int pci_mmcfg_arch_init(void); diff --git a/arch/x86_64/pci/Makefile b/arch/x86_64/pci/Makefile index 149aba0..c9eddc8 100644 --- a/arch/x86_64/pci/Makefile +++ b/arch/x86_64/pci/Makefile @@ -11,7 +11,7 @@ obj-y += fixup.o init.o obj-$(CONFIG_ACPI) += acpi.o obj-y += legacy.o irq.o common.o early.o # mmconfig has a 64bit special -obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o +obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o mmconfig-shared.o obj-$(CONFIG_NUMA) += k8-bus.o @@ -24,3 +24,4 @@ fixup-y += ../../i386/pci/fixup.o i386-y += ../../i386/pci/i386.o init-y += ../../i386/pci/init.o early-y += ../../i386/pci/early.o +mmconfig-shared-y += ../../i386/pci/mmconfig-shared.o diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c index faabb6e..0847735 100644 --- a/arch/x86_64/pci/mmconfig.c +++ b/arch/x86_64/pci/mmconfig.c @@ -19,9 +19,7 @@ /* Verify the first 16 busses. We assume that systems with more busses get MCFG right. */ -#define MAX_CHECK_BUS 16 - -static DECLARE_BITMAP(fallback_slots, 32*MAX_CHECK_BUS); +#define PCI_MMCFG_MAX_CHECK_BUS 16 /* Static virtual mapping of the MMCONFIG aperture */ struct mmcfg_virt { @@ -63,8 +61,8 @@ static char __iomem *get_virt(unsigned int seg, unsigned bus) static char __iomem *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn) { char __iomem *addr; - if (seg == 0 && bus < MAX_CHECK_BUS && - test_bit(32*bus + PCI_SLOT(devfn), fallback_slots)) + if (seg == 0 && bus < PCI_MMCFG_MAX_CHECK_BUS && + test_bit(32*bus + PCI_SLOT(devfn), pci_mmcfg_fallback_slots)) return NULL; addr = get_virt(seg, bus); if (!addr) @@ -135,63 +133,16 @@ static struct pci_raw_ops pci_mmcfg = { .write = pci_mmcfg_write, }; -/* K8 systems have some devices (typically in the builtin northbridge) - that are only accessible using type1 - Normally this can be expressed in the MCFG by not listing them - and assigning suitable _SEGs, but this isn't implemented in some BIOS. - Instead try to discover all devices on bus 0 that are unreachable using MM - and fallback for them. */ -static __init void unreachable_devices(void) -{ - int i, k; - /* Use the max bus number from ACPI here? */ - for (k = 0; k < MAX_CHECK_BUS; k++) { - for (i = 0; i < 32; i++) { - u32 val1; - char __iomem *addr; - - pci_conf1_read(0, k, PCI_DEVFN(i,0), 0, 4, &val1); - if (val1 == 0xffffffff) - continue; - addr = pci_dev_base(0, k, PCI_DEVFN(i, 0)); - if (addr == NULL|| readl(addr) != val1) { - set_bit(i + 32*k, fallback_slots); - printk(KERN_NOTICE "PCI: No mmconfig possible" - " on device %02x:%02x\n", k, i); - } - } - } -} - -void __init pci_mmcfg_init(int type) +int __init pci_mmcfg_arch_init(void) { int i; - - if ((pci_probe & PCI_PROBE_MMCONF) == 0) - return; - - acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg); - if ((pci_mmcfg_config_num == 0) || - (pci_mmcfg_config == NULL) || - (pci_mmcfg_config[0].address == 0)) - return; - - /* Only do this check when type 1 works. If it doesn't work - assume we run on a Mac and always use MCFG */ - if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].address, - pci_mmcfg_config[0].address + MMCONFIG_APER_MIN, - E820_RESERVED)) { - printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %lx is not E820-reserved\n", - (unsigned long)pci_mmcfg_config[0].address); - printk(KERN_ERR "PCI: Not using MMCONFIG.\n"); - return; - } - - pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * pci_mmcfg_config_num, GFP_KERNEL); + pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * + pci_mmcfg_config_num, GFP_KERNEL); if (pci_mmcfg_virt == NULL) { printk(KERN_ERR "PCI: Can not allocate memory for mmconfig structures\n"); - return; + return 0; } + for (i = 0; i < pci_mmcfg_config_num; ++i) { pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i]; pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].address, @@ -200,14 +151,11 @@ void __init pci_mmcfg_init(int type) printk(KERN_ERR "PCI: Cannot map mmconfig aperture for " "segment %d\n", pci_mmcfg_config[i].pci_segment); - return; + return 0; } - printk(KERN_INFO "PCI: Using MMCONFIG at %lx\n", - (unsigned long)pci_mmcfg_config[i].address); + printk(KERN_INFO "PCI: Using MMCONFIG at %Lx\n", + pci_mmcfg_config[i].address); } - - unreachable_devices(); - raw_pci_ops = &pci_mmcfg; - pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; + return 1; } -- cgit v0.10.2 From 5f027387bbdb5a4a4c1babd557fd976cd09d7495 Mon Sep 17 00:00:00 2001 From: Olivier Galibert Date: Tue, 13 Feb 2007 13:26:20 +0100 Subject: [PATCH] i386: Only call unreachable_devices() when type 1 is available. unreachable_devices compares between the results of pci configuration accesses through type1 and mmconfig, so it should be called only if type1 actually works in the first place. Signed-off-by: Olivier Galibert Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton diff --git a/arch/i386/pci/mmconfig-shared.c b/arch/i386/pci/mmconfig-shared.c index 998e04f..779c987 100644 --- a/arch/i386/pci/mmconfig-shared.c +++ b/arch/i386/pci/mmconfig-shared.c @@ -80,7 +80,8 @@ void __init pci_mmcfg_init(int type) } if (pci_mmcfg_arch_init()) { - unreachable_devices(); + if (type == 1) + unreachable_devices(); pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; } } -- cgit v0.10.2 From 9358c693c5ac1afde28f24ac651f7903d32a850c Mon Sep 17 00:00:00 2001 From: Olivier Galibert Date: Tue, 13 Feb 2007 13:26:20 +0100 Subject: [PATCH] mmconfig: Detect and support the E7520 and the 945G/GZ/P/PL It seems that the only way to reliably support mmconfig in the presence of funky biosen is to detect the hostbridge and read where the window is mapped from its registers. Do that for the E7520 and the 945G/GZ/P/PL for a start. Signed-off-by: Olivier Galibert Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton diff --git a/arch/i386/pci/mmconfig-shared.c b/arch/i386/pci/mmconfig-shared.c index 779c987..d72f04391 100644 --- a/arch/i386/pci/mmconfig-shared.c +++ b/arch/i386/pci/mmconfig-shared.c @@ -3,6 +3,7 @@ * MMCONFIG - common code between i386 and x86-64. * * This code does: + * - known chipset handling * - ACPI decoding and validation * * Per-architecture code takes care of the mappings and accesses @@ -55,12 +56,128 @@ static __init void unreachable_devices(void) } } +static __init const char *pci_mmcfg_e7520(void) +{ + u32 win; + pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0xce, 2, &win); + + pci_mmcfg_config_num = 1; + pci_mmcfg_config = kzalloc(sizeof(pci_mmcfg_config[0]), GFP_KERNEL); + if (!pci_mmcfg_config) + return NULL; + pci_mmcfg_config[0].address = (win & 0xf000) << 16; + pci_mmcfg_config[0].pci_segment = 0; + pci_mmcfg_config[0].start_bus_number = 0; + pci_mmcfg_config[0].end_bus_number = 255; + + return "Intel Corporation E7520 Memory Controller Hub"; +} + +static __init const char *pci_mmcfg_intel_945(void) +{ + u32 pciexbar, mask = 0, len = 0; + + pci_mmcfg_config_num = 1; + + pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0x48, 4, &pciexbar); + + /* Enable bit */ + if (!(pciexbar & 1)) + pci_mmcfg_config_num = 0; + + /* Size bits */ + switch ((pciexbar >> 1) & 3) { + case 0: + mask = 0xf0000000U; + len = 0x10000000U; + break; + case 1: + mask = 0xf8000000U; + len = 0x08000000U; + break; + case 2: + mask = 0xfc000000U; + len = 0x04000000U; + break; + default: + pci_mmcfg_config_num = 0; + } + + /* Errata #2, things break when not aligned on a 256Mb boundary */ + /* Can only happen in 64M/128M mode */ + + if ((pciexbar & mask) & 0x0fffffffU) + pci_mmcfg_config_num = 0; + + if (pci_mmcfg_config_num) { + pci_mmcfg_config = kzalloc(sizeof(pci_mmcfg_config[0]), GFP_KERNEL); + if (!pci_mmcfg_config) + return NULL; + pci_mmcfg_config[0].address = pciexbar & mask; + pci_mmcfg_config[0].pci_segment = 0; + pci_mmcfg_config[0].start_bus_number = 0; + pci_mmcfg_config[0].end_bus_number = (len >> 20) - 1; + } + + return "Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub"; +} + +struct pci_mmcfg_hostbridge_probe { + u32 vendor; + u32 device; + const char *(*probe)(void); +}; + +static __initdata struct pci_mmcfg_hostbridge_probe pci_mmcfg_probes[] = { + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, pci_mmcfg_e7520 }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82945G_HB, pci_mmcfg_intel_945 }, +}; + +static int __init pci_mmcfg_check_hostbridge(void) +{ + u32 l; + u16 vendor, device; + int i; + const char *name; + + pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0, 4, &l); + vendor = l & 0xffff; + device = (l >> 16) & 0xffff; + + pci_mmcfg_config_num = 0; + pci_mmcfg_config = NULL; + name = NULL; + + for (i = 0; !name && i < ARRAY_SIZE(pci_mmcfg_probes); i++) + if ((pci_mmcfg_probes[i].vendor == PCI_ANY_ID || + pci_mmcfg_probes[i].vendor == vendor) && + (pci_mmcfg_probes[i].device == PCI_ANY_ID || + pci_mmcfg_probes[i].device == device)) + name = pci_mmcfg_probes[i].probe(); + + if (name) { + if (pci_mmcfg_config_num) + printk(KERN_INFO "PCI: Found %s with MMCONFIG support.\n", name); + else + printk(KERN_INFO "PCI: Found %s without MMCONFIG support.\n", + name); + } + + return name != NULL; +} + void __init pci_mmcfg_init(int type) { + int known_bridge = 0; + if ((pci_probe & PCI_PROBE_MMCONF) == 0) return; - acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg); + if (type == 1 && pci_mmcfg_check_hostbridge()) + known_bridge = 1; + + if (!known_bridge) + acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg); if ((pci_mmcfg_config_num == 0) || (pci_mmcfg_config == NULL) || @@ -69,7 +186,7 @@ void __init pci_mmcfg_init(int type) /* Only do this check when type 1 works. If it doesn't work assume we run on a Mac and always use MCFG */ - if (type == 1 && + if (type == 1 && !known_bridge && !e820_all_mapped(pci_mmcfg_config[0].address, pci_mmcfg_config[0].address + MMCONFIG_APER_MIN, E820_RESERVED)) { -- cgit v0.10.2 From 6a0668fc41fa479df617151c2d4e297299a4ffe2 Mon Sep 17 00:00:00 2001 From: Olivier Galibert Date: Tue, 13 Feb 2007 13:26:20 +0100 Subject: [PATCH] mmconfig: Reserve resources but only when we're sure about them. Put back the resource reservation as per 4c6e052adfe285ede5884e4e8c4d33af33932c13 but use it *only* when the range(s) come from a chipset probe instead of the bios. Signed-off-by: Olivier Galibert Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton diff --git a/arch/i386/pci/mmconfig-shared.c b/arch/i386/pci/mmconfig-shared.c index d72f04391..4757554 100644 --- a/arch/i386/pci/mmconfig-shared.c +++ b/arch/i386/pci/mmconfig-shared.c @@ -166,6 +166,37 @@ static int __init pci_mmcfg_check_hostbridge(void) return name != NULL; } +static __init void pci_mmcfg_insert_resources(void) +{ +#define PCI_MMCFG_RESOURCE_NAME_LEN 19 + int i; + struct resource *res; + char *names; + unsigned num_buses; + + res = kcalloc(PCI_MMCFG_RESOURCE_NAME_LEN + sizeof(*res), + pci_mmcfg_config_num, GFP_KERNEL); + + if (!res) { + printk(KERN_ERR "PCI: Unable to allocate MMCONFIG resources\n"); + return; + } + + names = (void *)&res[pci_mmcfg_config_num]; + for (i = 0; i < pci_mmcfg_config_num; i++, res++) { + num_buses = pci_mmcfg_config[i].end_bus_number - + pci_mmcfg_config[i].start_bus_number + 1; + res->name = names; + snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN, "PCI MMCONFIG %u", + pci_mmcfg_config[i].pci_segment); + res->start = pci_mmcfg_config[i].address; + res->end = res->start + (num_buses << 20) - 1; + res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; + insert_resource(&iomem_resource, res); + names += PCI_MMCFG_RESOURCE_NAME_LEN; + } +} + void __init pci_mmcfg_init(int type) { int known_bridge = 0; @@ -199,6 +230,8 @@ void __init pci_mmcfg_init(int type) if (pci_mmcfg_arch_init()) { if (type == 1) unreachable_devices(); + if (known_bridge) + pci_mmcfg_insert_resources(); pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; } } -- cgit v0.10.2 From faed197b7b44a6c4e6b81dd2db649fd452b0a7ef Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Tue, 13 Feb 2007 13:26:20 +0100 Subject: [PATCH] mmconfig: Fix x86_64 ioremap base_address Current mmconfig has some problems of remapped range. a) In the case of broken MCFG tables on Asus etc., we need to remap 256M range, but currently only remap 1M. b) The base address always corresponds to bus number 0, but currently we are assuming it corresponds to start bus number. This patch fixes the above problems. (akpm: Arjan suggests that if the MCFG table is broken we just shouldn't use it, rather than try to work around things). Signed-off-by: OGAWA Hirofumi Signed-off-by: Andi Kleen Cc: Arjan van de Ven Cc: Andi Kleen Signed-off-by: Andrew Morton diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c index 0847735..8e05449 100644 --- a/arch/x86_64/pci/mmconfig.c +++ b/arch/x86_64/pci/mmconfig.c @@ -28,6 +28,39 @@ struct mmcfg_virt { }; static struct mmcfg_virt *pci_mmcfg_virt; +static inline int mcfg_broken(void) +{ + struct acpi_mcfg_allocation *cfg = &pci_mmcfg_config[0]; + + /* Handle more broken MCFG tables on Asus etc. + They only contain a single entry for bus 0-0. Assume + this applies to all busses. */ + if (pci_mmcfg_config_num == 1 && + cfg->pci_segment_group_number == 0 && + (cfg->start_bus_number | cfg->end_bus_number) == 0) + return 1; + return 0; +} + +static void __iomem *mcfg_ioremap(struct acpi_mcfg_allocation *cfg) +{ + void __iomem *addr; + u32 size; + + if (mcfg_broken()) + size = 256 << 20; + else + size = (cfg->end_bus_number + 1) << 20; + + addr = ioremap_nocache(cfg->base_address, size); + if (addr) { + printk(KERN_INFO "PCI: Using MMCONFIG at %x - %x\n", + cfg->base_address, + cfg->base_address + size - 1); + } + return addr; +} + static char __iomem *get_virt(unsigned int seg, unsigned bus) { int cfg_num = -1; @@ -45,13 +78,7 @@ static char __iomem *get_virt(unsigned int seg, unsigned bus) return pci_mmcfg_virt[cfg_num].virt; } - /* Handle more broken MCFG tables on Asus etc. - They only contain a single entry for bus 0-0. Assume - this applies to all busses. */ - cfg = &pci_mmcfg_config[0]; - if (pci_mmcfg_config_num == 1 && - cfg->pci_segment == 0 && - (cfg->start_bus_number | cfg->end_bus_number) == 0) + if (mcfg_broken()) return pci_mmcfg_virt[0].virt; /* Fall back to type 0 */ @@ -145,16 +172,13 @@ int __init pci_mmcfg_arch_init(void) for (i = 0; i < pci_mmcfg_config_num; ++i) { pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i]; - pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].address, - MMCONFIG_APER_MAX); + pci_mmcfg_virt[i].virt = mcfg_ioremap(&pci_mmcfg_config[i]); if (!pci_mmcfg_virt[i].virt) { printk(KERN_ERR "PCI: Cannot map mmconfig aperture for " "segment %d\n", pci_mmcfg_config[i].pci_segment); return 0; } - printk(KERN_INFO "PCI: Using MMCONFIG at %Lx\n", - pci_mmcfg_config[i].address); } raw_pci_ops = &pci_mmcfg; return 1; -- cgit v0.10.2 From 44de0203fab205417b24322272c53ee0883c36e7 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Tue, 13 Feb 2007 13:26:20 +0100 Subject: [PATCH] mmconfig: Reject a broken MCFG tables on Asus etc This rejects broken MCFG tables on Asus. When the table looks bogus just disable mmconfig Arjan and Andi suggested this. Signed-off-by: OGAWA Hirofumi Signed-off-by: Andi Kleen diff --git a/arch/i386/pci/mmconfig-shared.c b/arch/i386/pci/mmconfig-shared.c index 4757554..77de6de 100644 --- a/arch/i386/pci/mmconfig-shared.c +++ b/arch/i386/pci/mmconfig-shared.c @@ -197,6 +197,26 @@ static __init void pci_mmcfg_insert_resources(void) } } +static void __init pci_mmcfg_reject_broken(void) +{ + typeof(pci_mmcfg_config[0]) *cfg = &pci_mmcfg_config[0]; + + /* + * Handle more broken MCFG tables on Asus etc. + * They only contain a single entry for bus 0-0. + */ + if (pci_mmcfg_config_num == 1 && + cfg->pci_segment == 0 && + (cfg->start_bus_number | cfg->end_bus_number) == 0) { + kfree(pci_mmcfg_config); + pci_mmcfg_config = NULL; + pci_mmcfg_config_num = 0; + + printk(KERN_ERR "PCI: start and end of bus number is 0. " + "Rejected as broken MCFG."); + } +} + void __init pci_mmcfg_init(int type) { int known_bridge = 0; @@ -207,8 +227,10 @@ void __init pci_mmcfg_init(int type) if (type == 1 && pci_mmcfg_check_hostbridge()) known_bridge = 1; - if (!known_bridge) + if (!known_bridge) { acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg); + pci_mmcfg_reject_broken(); + } if ((pci_mmcfg_config_num == 0) || (pci_mmcfg_config == NULL) || diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c index 97dcaaa..3325b79 100644 --- a/arch/i386/pci/mmconfig.c +++ b/arch/i386/pci/mmconfig.c @@ -47,15 +47,6 @@ static u32 get_base_addr(unsigned int seg, int bus, unsigned devfn) return cfg->address; } - /* Handle more broken MCFG tables on Asus etc. - They only contain a single entry for bus 0-0. Assume - this applies to all busses. */ - cfg = &pci_mmcfg_config[0]; - if (pci_mmcfg_config_num == 1 && - cfg->pci_segment == 0 && - (cfg->start_bus_number | cfg->end_bus_number) == 0) - return cfg->address; - /* Fall back to type 0 */ return 0; } diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c index 8e05449..78e50b2 100644 --- a/arch/x86_64/pci/mmconfig.c +++ b/arch/x86_64/pci/mmconfig.c @@ -28,39 +28,6 @@ struct mmcfg_virt { }; static struct mmcfg_virt *pci_mmcfg_virt; -static inline int mcfg_broken(void) -{ - struct acpi_mcfg_allocation *cfg = &pci_mmcfg_config[0]; - - /* Handle more broken MCFG tables on Asus etc. - They only contain a single entry for bus 0-0. Assume - this applies to all busses. */ - if (pci_mmcfg_config_num == 1 && - cfg->pci_segment_group_number == 0 && - (cfg->start_bus_number | cfg->end_bus_number) == 0) - return 1; - return 0; -} - -static void __iomem *mcfg_ioremap(struct acpi_mcfg_allocation *cfg) -{ - void __iomem *addr; - u32 size; - - if (mcfg_broken()) - size = 256 << 20; - else - size = (cfg->end_bus_number + 1) << 20; - - addr = ioremap_nocache(cfg->base_address, size); - if (addr) { - printk(KERN_INFO "PCI: Using MMCONFIG at %x - %x\n", - cfg->base_address, - cfg->base_address + size - 1); - } - return addr; -} - static char __iomem *get_virt(unsigned int seg, unsigned bus) { int cfg_num = -1; @@ -78,9 +45,6 @@ static char __iomem *get_virt(unsigned int seg, unsigned bus) return pci_mmcfg_virt[cfg_num].virt; } - if (mcfg_broken()) - return pci_mmcfg_virt[0].virt; - /* Fall back to type 0 */ return NULL; } @@ -160,6 +124,20 @@ static struct pci_raw_ops pci_mmcfg = { .write = pci_mmcfg_write, }; +static void __iomem * __init mcfg_ioremap(struct acpi_mcfg_allocation *cfg) +{ + void __iomem *addr; + u32 size; + + size = (cfg->end_bus_number + 1) << 20; + addr = ioremap_nocache(cfg->address, size); + if (addr) { + printk(KERN_INFO "PCI: Using MMCONFIG at %Lx - %Lx\n", + cfg->address, cfg->address + size - 1); + } + return addr; +} + int __init pci_mmcfg_arch_init(void) { int i; -- cgit v0.10.2 From a4ec1b2c9fe9492c9ab30261b411d836527fe0b6 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Tue, 13 Feb 2007 13:26:20 +0100 Subject: [PATCH] mmconfig: remove #define MMCONFIG_APER_XXX MMCONFIG_APER_XXX is unneeded in arch/x86_64/pci/mmconfig.c. Signed-off-by: OGAWA Hirofumi Signed-off-by: Andi Kleen diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c index 78e50b2..50512a8 100644 --- a/arch/x86_64/pci/mmconfig.c +++ b/arch/x86_64/pci/mmconfig.c @@ -13,10 +13,6 @@ #include "pci.h" -/* aperture is up to 256MB but BIOS may reserve less */ -#define MMCONFIG_APER_MIN (2 * 1024*1024) -#define MMCONFIG_APER_MAX (256 * 1024*1024) - /* Verify the first 16 busses. We assume that systems with more busses get MCFG right. */ #define PCI_MMCFG_MAX_CHECK_BUS 16 -- cgit v0.10.2 From 429d512e532ec9c969aa6f66ddbc542f3a5fe4da Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Tue, 13 Feb 2007 13:26:20 +0100 Subject: [PATCH] mmconfig: minor cleanup in mmconfig code This just cleans up. Signed-off-by: OGAWA Hirofumi Signed-off-by: Andi Kleen diff --git a/arch/i386/pci/mmconfig-shared.c b/arch/i386/pci/mmconfig-shared.c index 77de6de..4ea0852 100644 --- a/arch/i386/pci/mmconfig-shared.c +++ b/arch/i386/pci/mmconfig-shared.c @@ -22,10 +22,6 @@ #define MMCONFIG_APER_MIN (2 * 1024*1024) #define MMCONFIG_APER_MAX (256 * 1024*1024) -/* Verify the first 16 busses. We assume that systems with more busses - get MCFG right. */ -#define PCI_MMCFG_MAX_CHECK_BUS 16 - DECLARE_BITMAP(pci_mmcfg_fallback_slots, 32*PCI_MMCFG_MAX_CHECK_BUS); /* K8 systems have some devices (typically in the builtin northbridge) @@ -34,29 +30,30 @@ DECLARE_BITMAP(pci_mmcfg_fallback_slots, 32*PCI_MMCFG_MAX_CHECK_BUS); and assigning suitable _SEGs, but this isn't implemented in some BIOS. Instead try to discover all devices on bus 0 that are unreachable using MM and fallback for them. */ -static __init void unreachable_devices(void) +static void __init unreachable_devices(void) { - int i, k; + int i, bus; /* Use the max bus number from ACPI here? */ - for (k = 0; k < PCI_MMCFG_MAX_CHECK_BUS; k++) { + for (bus = 0; bus < PCI_MMCFG_MAX_CHECK_BUS; bus++) { for (i = 0; i < 32; i++) { + unsigned int devfn = PCI_DEVFN(i, 0); u32 val1, val2; - pci_conf1_read(0, k, PCI_DEVFN(i,0), 0, 4, &val1); + pci_conf1_read(0, bus, devfn, 0, 4, &val1); if (val1 == 0xffffffff) continue; - raw_pci_ops->read(0, k, PCI_DEVFN(i, 0), 0, 4, &val2); + raw_pci_ops->read(0, bus, devfn, 0, 4, &val2); if (val1 != val2) { - set_bit(i + 32*k, pci_mmcfg_fallback_slots); + set_bit(i + 32 * bus, pci_mmcfg_fallback_slots); printk(KERN_NOTICE "PCI: No mmconfig possible" - " on device %02x:%02x\n", k, i); + " on device %02x:%02x\n", bus, i); } } } } -static __init const char *pci_mmcfg_e7520(void) +static const char __init *pci_mmcfg_e7520(void) { u32 win; pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0xce, 2, &win); @@ -73,7 +70,7 @@ static __init const char *pci_mmcfg_e7520(void) return "Intel Corporation E7520 Memory Controller Hub"; } -static __init const char *pci_mmcfg_intel_945(void) +static const char __init *pci_mmcfg_intel_945(void) { u32 pciexbar, mask = 0, len = 0; @@ -128,7 +125,7 @@ struct pci_mmcfg_hostbridge_probe { const char *(*probe)(void); }; -static __initdata struct pci_mmcfg_hostbridge_probe pci_mmcfg_probes[] = { +static struct pci_mmcfg_hostbridge_probe pci_mmcfg_probes[] __initdata = { { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, pci_mmcfg_e7520 }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82945G_HB, pci_mmcfg_intel_945 }, }; @@ -148,25 +145,21 @@ static int __init pci_mmcfg_check_hostbridge(void) pci_mmcfg_config = NULL; name = NULL; - for (i = 0; !name && i < ARRAY_SIZE(pci_mmcfg_probes); i++) - if ((pci_mmcfg_probes[i].vendor == PCI_ANY_ID || - pci_mmcfg_probes[i].vendor == vendor) && - (pci_mmcfg_probes[i].device == PCI_ANY_ID || - pci_mmcfg_probes[i].device == device)) + for (i = 0; !name && i < ARRAY_SIZE(pci_mmcfg_probes); i++) { + if (pci_mmcfg_probes[i].vendor == vendor && + pci_mmcfg_probes[i].device == device) name = pci_mmcfg_probes[i].probe(); + } if (name) { - if (pci_mmcfg_config_num) - printk(KERN_INFO "PCI: Found %s with MMCONFIG support.\n", name); - else - printk(KERN_INFO "PCI: Found %s without MMCONFIG support.\n", - name); + printk(KERN_INFO "PCI: Found %s %s MMCONFIG support.\n", + name, pci_mmcfg_config_num ? "with" : "without"); } return name != NULL; } -static __init void pci_mmcfg_insert_resources(void) +static void __init pci_mmcfg_insert_resources(void) { #define PCI_MMCFG_RESOURCE_NAME_LEN 19 int i; @@ -176,7 +169,6 @@ static __init void pci_mmcfg_insert_resources(void) res = kcalloc(PCI_MMCFG_RESOURCE_NAME_LEN + sizeof(*res), pci_mmcfg_config_num, GFP_KERNEL); - if (!res) { printk(KERN_ERR "PCI: Unable to allocate MMCONFIG resources\n"); return; @@ -184,12 +176,12 @@ static __init void pci_mmcfg_insert_resources(void) names = (void *)&res[pci_mmcfg_config_num]; for (i = 0; i < pci_mmcfg_config_num; i++, res++) { - num_buses = pci_mmcfg_config[i].end_bus_number - - pci_mmcfg_config[i].start_bus_number + 1; + struct acpi_mcfg_allocation *cfg = &pci_mmcfg_config[i]; + num_buses = cfg->end_bus_number - cfg->start_bus_number + 1; res->name = names; snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN, "PCI MMCONFIG %u", - pci_mmcfg_config[i].pci_segment); - res->start = pci_mmcfg_config[i].address; + cfg->pci_segment); + res->start = cfg->address; res->end = res->start + (num_buses << 20) - 1; res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; insert_resource(&iomem_resource, res); diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c index 3325b79..11be089 100644 --- a/arch/i386/pci/mmconfig.c +++ b/arch/i386/pci/mmconfig.c @@ -27,22 +27,17 @@ static int mmcfg_last_accessed_cpu; */ static u32 get_base_addr(unsigned int seg, int bus, unsigned devfn) { - int cfg_num = -1; struct acpi_mcfg_allocation *cfg; + int cfg_num; if (seg == 0 && bus < PCI_MMCFG_MAX_CHECK_BUS && test_bit(PCI_SLOT(devfn) + 32*bus, pci_mmcfg_fallback_slots)) return 0; - while (1) { - ++cfg_num; - if (cfg_num >= pci_mmcfg_config_num) { - break; - } + for (cfg_num = 0; cfg_num < pci_mmcfg_config_num; cfg_num++) { cfg = &pci_mmcfg_config[cfg_num]; - if (cfg->pci_segment != seg) - continue; - if ((cfg->start_bus_number <= bus) && + if (cfg->pci_segment == seg && + (cfg->start_bus_number <= bus) && (cfg->end_bus_number >= bus)) return cfg->address; } diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h index 0270c80..2ce3d44 100644 --- a/arch/i386/pci/pci.h +++ b/arch/i386/pci/pci.h @@ -96,7 +96,9 @@ extern void pcibios_sort(void); /* pci-mmconfig.c */ +/* Verify the first 16 busses. We assume that systems with more busses + get MCFG right. */ #define PCI_MMCFG_MAX_CHECK_BUS 16 extern DECLARE_BITMAP(pci_mmcfg_fallback_slots, 32*PCI_MMCFG_MAX_CHECK_BUS); -extern int pci_mmcfg_arch_init(void); +extern int __init pci_mmcfg_arch_init(void); diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c index 50512a8..918fc5b 100644 --- a/arch/x86_64/pci/mmconfig.c +++ b/arch/x86_64/pci/mmconfig.c @@ -13,10 +13,6 @@ #include "pci.h" -/* Verify the first 16 busses. We assume that systems with more busses - get MCFG right. */ -#define PCI_MMCFG_MAX_CHECK_BUS 16 - /* Static virtual mapping of the MMCONFIG aperture */ struct mmcfg_virt { struct acpi_mcfg_allocation *cfg; @@ -26,17 +22,13 @@ static struct mmcfg_virt *pci_mmcfg_virt; static char __iomem *get_virt(unsigned int seg, unsigned bus) { - int cfg_num = -1; struct acpi_mcfg_allocation *cfg; + int cfg_num; - while (1) { - ++cfg_num; - if (cfg_num >= pci_mmcfg_config_num) - break; + for (cfg_num = 0; cfg_num < pci_mmcfg_config_num; cfg_num++) { cfg = pci_mmcfg_virt[cfg_num].cfg; - if (cfg->pci_segment != seg) - continue; - if ((cfg->start_bus_number <= bus) && + if (cfg->pci_segment == seg && + (cfg->start_bus_number <= bus) && (cfg->end_bus_number >= bus)) return pci_mmcfg_virt[cfg_num].virt; } -- cgit v0.10.2 From 56829d1982b6f1150553c049d372728b9eda5aec Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Tue, 13 Feb 2007 13:26:20 +0100 Subject: [PATCH] mmconfig: fix unreachable_devices() Currently, unreachable_devices() compares value of mmconfig and value of conf1. But it doesn't check the device is reachable or not. Signed-off-by: OGAWA Hirofumi Signed-off-by: Andi Kleen diff --git a/arch/i386/pci/mmconfig-shared.c b/arch/i386/pci/mmconfig-shared.c index 4ea0852..473db62 100644 --- a/arch/i386/pci/mmconfig-shared.c +++ b/arch/i386/pci/mmconfig-shared.c @@ -43,12 +43,14 @@ static void __init unreachable_devices(void) if (val1 == 0xffffffff) continue; - raw_pci_ops->read(0, bus, devfn, 0, 4, &val2); - if (val1 != val2) { - set_bit(i + 32 * bus, pci_mmcfg_fallback_slots); - printk(KERN_NOTICE "PCI: No mmconfig possible" - " on device %02x:%02x\n", bus, i); + if (pci_mmcfg_arch_reachable(0, bus, devfn)) { + raw_pci_ops->read(0, bus, devfn, 0, 4, &val2); + if (val1 == val2) + continue; } + set_bit(i + 32 * bus, pci_mmcfg_fallback_slots); + printk(KERN_NOTICE "PCI: No mmconfig possible on device" + " %02x:%02x\n", bus, i); } } } diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c index 11be089..bb1afd9 100644 --- a/arch/i386/pci/mmconfig.c +++ b/arch/i386/pci/mmconfig.c @@ -136,6 +136,12 @@ static struct pci_raw_ops pci_mmcfg = { .write = pci_mmcfg_write, }; +int __init pci_mmcfg_arch_reachable(unsigned int seg, unsigned int bus, + unsigned int devfn) +{ + return get_base_addr(seg, bus, devfn) != 0; +} + int __init pci_mmcfg_arch_init(void) { printk(KERN_INFO "PCI: Using MMCONFIG\n"); diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h index 2ce3d44..e58bae2 100644 --- a/arch/i386/pci/pci.h +++ b/arch/i386/pci/pci.h @@ -101,4 +101,6 @@ extern void pcibios_sort(void); #define PCI_MMCFG_MAX_CHECK_BUS 16 extern DECLARE_BITMAP(pci_mmcfg_fallback_slots, 32*PCI_MMCFG_MAX_CHECK_BUS); +extern int __init pci_mmcfg_arch_reachable(unsigned int seg, unsigned int bus, + unsigned int devfn); extern int __init pci_mmcfg_arch_init(void); diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c index 918fc5b..65d8273 100644 --- a/arch/x86_64/pci/mmconfig.c +++ b/arch/x86_64/pci/mmconfig.c @@ -126,6 +126,12 @@ static void __iomem * __init mcfg_ioremap(struct acpi_mcfg_allocation *cfg) return addr; } +int __init pci_mmcfg_arch_reachable(unsigned int seg, unsigned int bus, + unsigned int devfn) +{ + return pci_dev_base(seg, bus, devfn) != NULL; +} + int __init pci_mmcfg_arch_init(void) { int i; -- cgit v0.10.2 From 26054ed02bb20f5b2e02d92cb6f0be0e2b0196d5 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Tue, 13 Feb 2007 13:26:20 +0100 Subject: [PATCH] mmconfig: Move e820 check into pci_mmcfg_reject_broken() This is just cleanup. It moves to e820 check into pci_mmcfg_reject_broken(). Signed-off-by: OGAWA Hirofumi Signed-off-by: Andi Kleen diff --git a/arch/i386/pci/mmconfig-shared.c b/arch/i386/pci/mmconfig-shared.c index 473db62..747d8c6 100644 --- a/arch/i386/pci/mmconfig-shared.c +++ b/arch/i386/pci/mmconfig-shared.c @@ -191,9 +191,16 @@ static void __init pci_mmcfg_insert_resources(void) } } -static void __init pci_mmcfg_reject_broken(void) +static void __init pci_mmcfg_reject_broken(int type) { - typeof(pci_mmcfg_config[0]) *cfg = &pci_mmcfg_config[0]; + typeof(pci_mmcfg_config[0]) *cfg; + + if ((pci_mmcfg_config_num == 0) || + (pci_mmcfg_config == NULL) || + (pci_mmcfg_config[0].address == 0)) + return; + + cfg = &pci_mmcfg_config[0]; /* * Handle more broken MCFG tables on Asus etc. @@ -202,13 +209,29 @@ static void __init pci_mmcfg_reject_broken(void) if (pci_mmcfg_config_num == 1 && cfg->pci_segment == 0 && (cfg->start_bus_number | cfg->end_bus_number) == 0) { - kfree(pci_mmcfg_config); - pci_mmcfg_config = NULL; - pci_mmcfg_config_num = 0; - printk(KERN_ERR "PCI: start and end of bus number is 0. " - "Rejected as broken MCFG."); + "Rejected as broken MCFG.\n"); + goto reject; + } + + /* + * Only do this check when type 1 works. If it doesn't work + * assume we run on a Mac and always use MCFG + */ + if (type == 1 && !e820_all_mapped(cfg->address, + cfg->address + MMCONFIG_APER_MIN, + E820_RESERVED)) { + printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not" + " E820-reserved\n", cfg->address); + goto reject; } + return; + +reject: + printk(KERN_ERR "PCI: Not using MMCONFIG.\n"); + kfree(pci_mmcfg_config); + pci_mmcfg_config = NULL; + pci_mmcfg_config_num = 0; } void __init pci_mmcfg_init(int type) @@ -223,7 +246,7 @@ void __init pci_mmcfg_init(int type) if (!known_bridge) { acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg); - pci_mmcfg_reject_broken(); + pci_mmcfg_reject_broken(type); } if ((pci_mmcfg_config_num == 0) || @@ -231,18 +254,6 @@ void __init pci_mmcfg_init(int type) (pci_mmcfg_config[0].address == 0)) return; - /* Only do this check when type 1 works. If it doesn't work - assume we run on a Mac and always use MCFG */ - if (type == 1 && !known_bridge && - !e820_all_mapped(pci_mmcfg_config[0].address, - pci_mmcfg_config[0].address + MMCONFIG_APER_MIN, - E820_RESERVED)) { - printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not E820-reserved\n", - pci_mmcfg_config[0].address); - printk(KERN_ERR "PCI: Not using MMCONFIG.\n"); - return; - } - if (pci_mmcfg_arch_init()) { if (type == 1) unreachable_devices(); -- cgit v0.10.2 From 5809f9d442e9dbb23859e2c37d8c47043f6b5cc9 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 13 Feb 2007 13:26:21 +0100 Subject: [PATCH] x86-64: get rid of ARCH_HAVE_XTIME_LOCK ARCH_HAVE_XTIME_LOCK is used by x86_64 arch . This arch needs to place a read only copy of xtime_lock into vsyscall page. This read only copy is named __xtime_lock, and xtime_lock is defined in arch/x86_64/kernel/vmlinux.lds.S as an alias. So the declaration of xtime_lock in kernel/timer.c was guarded by ARCH_HAVE_XTIME_LOCK define, defined to true on x86_64. We can get same result with _attribute__((weak)) in the declaration. linker should do the job. Signed-off-by: Eric Dumazet Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton diff --git a/include/asm-x86_64/vsyscall.h b/include/asm-x86_64/vsyscall.h index 05cb8dd..0c78471 100644 --- a/include/asm-x86_64/vsyscall.h +++ b/include/asm-x86_64/vsyscall.h @@ -56,11 +56,6 @@ extern struct vxtime_data vxtime; extern int vgetcpu_mode; extern struct timezone sys_tz; extern int sysctl_vsyscall; -extern seqlock_t xtime_lock; - -extern int sysctl_vsyscall; - -#define ARCH_HAVE_XTIME_LOCK 1 #endif /* __KERNEL__ */ diff --git a/include/linux/time.h b/include/linux/time.h index 55cee17..eceb1a5 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -90,7 +90,7 @@ static inline struct timespec timespec_sub(struct timespec lhs, extern struct timespec xtime; extern struct timespec wall_to_monotonic; -extern seqlock_t xtime_lock; +extern seqlock_t xtime_lock __attribute__((weak)); void timekeeping_init(void); diff --git a/kernel/timer.c b/kernel/timer.c index 8533c37..4902181 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -1162,11 +1162,9 @@ static inline void calc_load(unsigned long ticks) * This read-write spinlock protects us from races in SMP while * playing with xtime and avenrun. */ -#ifndef ARCH_HAVE_XTIME_LOCK -__cacheline_aligned_in_smp DEFINE_SEQLOCK(xtime_lock); +__attribute__((weak)) __cacheline_aligned_in_smp DEFINE_SEQLOCK(xtime_lock); EXPORT_SYMBOL(xtime_lock); -#endif /* * This function runs timers and the timer-tq in bottom half context. -- cgit v0.10.2 From 5558870bfbcca10cfc7b13ab866687012ea3c9af Mon Sep 17 00:00:00 2001 From: Karsten Weiss Date: Tue, 13 Feb 2007 13:26:21 +0100 Subject: [PATCH] x86-64: improved iommu documentation - add SWIOTLB config help text - mention Documentation/x86_64/boot-options.txt in Documentation/kernel-parameters.txt - remove the duplication of the iommu kernel parameter documentation. - Better explanation of some of the iommu kernel parameter options. - "32MB< Signed-off-by: Andi Kleen Acked-by: Muli Ben-Yehuda Cc: Andi Kleen Signed-off-by: Andrew Morton diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index d25acd5..733a736 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -104,6 +104,9 @@ loader, and have no meaning to the kernel directly. Do not modify the syntax of boot loader parameters without extreme need or coordination with . +There are also arch-specific kernel-parameters not documented here. +See for example . + Note that ALL kernel parameters listed below are CASE SENSITIVE, and that a trailing = on the name of any parameter states that that parameter will be entered as an environment variable, whereas its absence indicates that diff --git a/Documentation/x86_64/boot-options.txt b/Documentation/x86_64/boot-options.txt index 5c86ed6..0d65399 100644 --- a/Documentation/x86_64/boot-options.txt +++ b/Documentation/x86_64/boot-options.txt @@ -180,40 +180,81 @@ PCI pci=lastbus=NUMBER Scan upto NUMBER busses, no matter what the mptable says. pci=noacpi Don't use ACPI to set up PCI interrupt routing. -IOMMU - - iommu=[size][,noagp][,off][,force][,noforce][,leak][,memaper[=order]][,merge] - [,forcesac][,fullflush][,nomerge][,noaperture][,calgary] - size set size of iommu (in bytes) - noagp don't initialize the AGP driver and use full aperture. - off don't use the IOMMU - leak turn on simple iommu leak tracing (only when CONFIG_IOMMU_LEAK is on) - memaper[=order] allocate an own aperture over RAM with size 32MB^order. - noforce don't force IOMMU usage. Default. - force Force IOMMU. - merge Do SG merging. Implies force (experimental) - nomerge Don't do SG merging. - forcesac For SAC mode for masks <40bits (experimental) - fullflush Flush IOMMU on each allocation (default) - nofullflush Don't use IOMMU fullflush - allowed overwrite iommu off workarounds for specific chipsets. - soft Use software bounce buffering (default for Intel machines) - noaperture Don't touch the aperture for AGP. - allowdac Allow DMA >4GB - When off all DMA over >4GB is forced through an IOMMU or bounce - buffering. - nodac Forbid DMA >4GB - panic Always panic when IOMMU overflows - calgary Use the Calgary IOMMU if it is available - - swiotlb=pages[,force] - - pages Prereserve that many 128K pages for the software IO bounce buffering. - force Force all IO through the software TLB. - - calgary=[64k,128k,256k,512k,1M,2M,4M,8M] - calgary=[translate_empty_slots] - calgary=[disable=] +IOMMU (input/output memory management unit) + + Currently four x86-64 PCI-DMA mapping implementations exist: + + 1. : use no hardware/software IOMMU at all + (e.g. because you have < 3 GB memory). + Kernel boot message: "PCI-DMA: Disabling IOMMU" + + 2. : AMD GART based hardware IOMMU. + Kernel boot message: "PCI-DMA: using GART IOMMU" + + 3. : Software IOMMU implementation. Used + e.g. if there is no hardware IOMMU in the system and it is need because + you have >3GB memory or told the kernel to us it (iommu=soft)) + Kernel boot message: "PCI-DMA: Using software bounce buffering + for IO (SWIOTLB)" + + 4. : IBM Calgary hardware IOMMU. Used in IBM + pSeries and xSeries servers. This hardware IOMMU supports DMA address + mapping with memory protection, etc. + Kernel boot message: "PCI-DMA: Using Calgary IOMMU" + + iommu=[][,noagp][,off][,force][,noforce][,leak[=] + [,memaper[=]][,merge][,forcesac][,fullflush][,nomerge] + [,noaperture][,calgary] + + General iommu options: + off Don't initialize and use any kind of IOMMU. + noforce Don't force hardware IOMMU usage when it is not needed. + (default). + force Force the use of the hardware IOMMU even when it is + not actually needed (e.g. because < 3 GB memory). + soft Use software bounce buffering (SWIOTLB) (default for + Intel machines). This can be used to prevent the usage + of an available hardware IOMMU. + + iommu options only relevant to the AMD GART hardware IOMMU: + Set the size of the remapping area in bytes. + allowed Overwrite iommu off workarounds for specific chipsets. + fullflush Flush IOMMU on each allocation (default). + nofullflush Don't use IOMMU fullflush. + leak Turn on simple iommu leak tracing (only when + CONFIG_IOMMU_LEAK is on). Default number of leak pages + is 20. + memaper[=] Allocate an own aperture over RAM with size 32MB<4GB. + DAC is used with 32-bit PCI to push a 64-bit address in + two cycles. When off all DMA over >4GB is forced through + an IOMMU or software bounce buffering. + nodac Forbid DAC mode, i.e. DMA >4GB. + panic Always panic when IOMMU overflows. + calgary Use the Calgary IOMMU if it is available + + iommu options only relevant to the software bounce buffering (SWIOTLB) IOMMU + implementation: + swiotlb=[,force] + Prereserve that many 128K pages for the software IO + bounce buffering. + force Force all IO through the software TLB. + + Settings for the IBM Calgary hardware IOMMU currently found in IBM + pSeries and xSeries machines: + + calgary=[64k,128k,256k,512k,1M,2M,4M,8M] + calgary=[translate_empty_slots] + calgary=[disable=] + panic Always panic when IOMMU overflows 64k,...,8M - Set the size of each PCI slot's translation table when using the Calgary IOMMU. This is the size of the translation diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 02dd394..a55382a 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -458,8 +458,8 @@ config IOMMU on systems with more than 3GB. This is usually needed for USB, sound, many IDE/SATA chipsets and some other devices. Provides a driver for the AMD Athlon64/Opteron/Turion/Sempron GART - based IOMMU and a software bounce buffer based IOMMU used on Intel - systems and as fallback. + based hardware IOMMU and a software bounce buffer based IOMMU used + on Intel systems and as fallback. The code is only active when needed (enough memory and limited device) unless CONFIG_IOMMU_DEBUG or iommu=force is specified too. @@ -496,6 +496,12 @@ config CALGARY_IOMMU_ENABLED_BY_DEFAULT # need this always selected by IOMMU for the VIA workaround config SWIOTLB bool + help + Support for software bounce buffers used on x86-64 systems + which don't have a hardware IOMMU (e.g. the current generation + of Intel's x86-64 CPUs). Using this PCI devices which can only + access 32-bits of memory can be used on systems with more than + 3 GB of memory. If unsure, say Y. config X86_MCE bool "Machine check support" if EMBEDDED diff --git a/arch/x86_64/kernel/pci-dma.c b/arch/x86_64/kernel/pci-dma.c index 683b7a5..651ccfb 100644 --- a/arch/x86_64/kernel/pci-dma.c +++ b/arch/x86_64/kernel/pci-dma.c @@ -223,30 +223,10 @@ int dma_set_mask(struct device *dev, u64 mask) } EXPORT_SYMBOL(dma_set_mask); -/* iommu=[size][,noagp][,off][,force][,noforce][,leak][,memaper[=order]][,merge] - [,forcesac][,fullflush][,nomerge][,biomerge] - size set size of iommu (in bytes) - noagp don't initialize the AGP driver and use full aperture. - off don't use the IOMMU - leak turn on simple iommu leak tracing (only when CONFIG_IOMMU_LEAK is on) - memaper[=order] allocate an own aperture over RAM with size 32MB^order. - noforce don't force IOMMU usage. Default. - force Force IOMMU. - merge Do lazy merging. This may improve performance on some block devices. - Implies force (experimental) - biomerge Do merging at the BIO layer. This is more efficient than merge, - but should be only done with very big IOMMUs. Implies merge,force. - nomerge Don't do SG merging. - forcesac For SAC mode for masks <40bits (experimental) - fullflush Flush IOMMU on each allocation (default) - nofullflush Don't use IOMMU fullflush - allowed overwrite iommu off workarounds for specific chipsets. - soft Use software bounce buffering (default for Intel machines) - noaperture Don't touch the aperture for AGP. - allowdac Allow DMA >4GB - nodac Forbid DMA >4GB - panic Force panic when IOMMU overflows -*/ +/* + * See for the iommu kernel parameter + * documentation. + */ __init int iommu_setup(char *p) { iommu_merge = 1; -- cgit v0.10.2 From 006e84ee3a54e393ec6bef2a9bc891dc5bde2843 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 13 Feb 2007 13:26:21 +0100 Subject: [PATCH] x86-64: do not always end the stack trace with ULONG_MAX It makes more sense to end the stack trace with ULONG_MAX only if nr_entries < max_entries. Otherwise, we lose one entry in the long stack traces and cannot know whether the trace was complete or not. Signed-off-by: Catalin Marinas Signed-off-by: Andi Kleen Cc: Andi Kleen Cc: Jan Beulich Signed-off-by: Andrew Morton diff --git a/arch/x86_64/kernel/stacktrace.c b/arch/x86_64/kernel/stacktrace.c index 6026b31..65ac2c6 100644 --- a/arch/x86_64/kernel/stacktrace.c +++ b/arch/x86_64/kernel/stacktrace.c @@ -32,7 +32,7 @@ static void save_stack_address(void *data, unsigned long addr) trace->skip--; return; } - if (trace->nr_entries < trace->max_entries - 1) + if (trace->nr_entries < trace->max_entries) trace->entries[trace->nr_entries++] = addr; } @@ -49,7 +49,8 @@ static struct stacktrace_ops save_stack_ops = { void save_stack_trace(struct stack_trace *trace, struct task_struct *task) { dump_trace(task, NULL, NULL, &save_stack_ops, trace); - trace->entries[trace->nr_entries++] = ULONG_MAX; + if (trace->nr_entries < trace->max_entries) + trace->entries[trace->nr_entries++] = ULONG_MAX; } EXPORT_SYMBOL(save_stack_trace); -- cgit v0.10.2 From 90611fe923aa3ac7ffb9e5df45c83860b0f00227 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 13 Feb 2007 13:26:21 +0100 Subject: [PATCH] i386: arch/i386/kernel/e820.c should #include Signed-off-by: Andrew Morton Signed-off-by: Andi Kleen diff --git a/arch/i386/kernel/e820.c b/arch/i386/kernel/e820.c index f391abc..9ded1e4 100644 --- a/arch/i386/kernel/e820.c +++ b/arch/i386/kernel/e820.c @@ -14,6 +14,7 @@ #include #include #include +#include #ifdef CONFIG_EFI int efi_enabled = 0; -- cgit v0.10.2 From c119ecce894120790903ef535dac3e105f3d6cde Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Tue, 13 Feb 2007 13:26:21 +0100 Subject: [PATCH] MM: page allocation hooks for VMI backend The VMI backend uses explicit page type notification to track shadow page tables. The allocation of page table roots is especially tricky. We need to clone the root for non-PAE mode while it is protected under the pgd lock to correctly copy the shadow. We don't need to allocate pgds in PAE mode, (PDPs in Intel terminology) as they only have 4 entries, and are cached entirely by the processor, which makes shadowing them rather simple. For base page table level allocation, pmd_populate provides the exact hook point we need. Also, we need to allocate pages when splitting a large page, and we must release pages before returning the page to any free pool. Despite being required with these slightly odd semantics for VMI, Xen also uses these hooks to determine the exact moment when page tables are created or released. AK: All nops for other architectures Signed-off-by: Zachary Amsden Signed-off-by: Andi Kleen Cc: Andi Kleen Cc: Jeremy Fitzhardinge Cc: Rusty Russell Cc: Chris Wright Signed-off-by: Andrew Morton diff --git a/arch/i386/kernel/paravirt.c b/arch/i386/kernel/paravirt.c index e55fd05..7329ec9 100644 --- a/arch/i386/kernel/paravirt.c +++ b/arch/i386/kernel/paravirt.c @@ -550,6 +550,12 @@ struct paravirt_ops paravirt_ops = { .flush_tlb_kernel = native_flush_tlb_global, .flush_tlb_single = native_flush_tlb_single, + .alloc_pt = (void *)native_nop, + .alloc_pd = (void *)native_nop, + .alloc_pd_clone = (void *)native_nop, + .release_pt = (void *)native_nop, + .release_pd = (void *)native_nop, + .set_pte = native_set_pte, .set_pte_at = native_set_pte_at, .set_pmd = native_set_pmd, diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c index c5c5ea7..ae43688 100644 --- a/arch/i386/mm/init.c +++ b/arch/i386/mm/init.c @@ -62,6 +62,7 @@ static pmd_t * __init one_md_table_init(pgd_t *pgd) #ifdef CONFIG_X86_PAE pmd_table = (pmd_t *) alloc_bootmem_low_pages(PAGE_SIZE); + paravirt_alloc_pd(__pa(pmd_table) >> PAGE_SHIFT); set_pgd(pgd, __pgd(__pa(pmd_table) | _PAGE_PRESENT)); pud = pud_offset(pgd, 0); if (pmd_table != pmd_offset(pud, 0)) @@ -82,6 +83,7 @@ static pte_t * __init one_page_table_init(pmd_t *pmd) { if (pmd_none(*pmd)) { pte_t *page_table = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE); + paravirt_alloc_pt(__pa(page_table) >> PAGE_SHIFT); set_pmd(pmd, __pmd(__pa(page_table) | _PAGE_TABLE)); if (page_table != pte_offset_kernel(pmd, 0)) BUG(); @@ -345,6 +347,8 @@ static void __init pagetable_init (void) /* Init entries of the first-level page table to the zero page */ for (i = 0; i < PTRS_PER_PGD; i++) set_pgd(pgd_base + i, __pgd(__pa(empty_zero_page) | _PAGE_PRESENT)); +#else + paravirt_alloc_pd(__pa(swapper_pg_dir) >> PAGE_SHIFT); #endif /* Enable PSE if available */ diff --git a/arch/i386/mm/pageattr.c b/arch/i386/mm/pageattr.c index e223b1d..412ebbd 100644 --- a/arch/i386/mm/pageattr.c +++ b/arch/i386/mm/pageattr.c @@ -60,6 +60,7 @@ static struct page *split_large_page(unsigned long address, pgprot_t prot, address = __pa(address); addr = address & LARGE_PAGE_MASK; pbase = (pte_t *)page_address(base); + paravirt_alloc_pt(page_to_pfn(base)); for (i = 0; i < PTRS_PER_PTE; i++, addr += PAGE_SIZE) { set_pte(&pbase[i], pfn_pte(addr >> PAGE_SHIFT, addr == address ? prot : ref_prot)); @@ -172,6 +173,7 @@ __change_page_attr(struct page *page, pgprot_t prot) if (!PageReserved(kpte_page)) { if (cpu_has_pse && (page_private(kpte_page) == 0)) { ClearPagePrivate(kpte_page); + paravirt_release_pt(page_to_pfn(kpte_page)); list_add(&kpte_page->lru, &df_list); revert_page(kpte_page, address); } diff --git a/arch/i386/mm/pgtable.c b/arch/i386/mm/pgtable.c index f349eaf..b5f538f 100644 --- a/arch/i386/mm/pgtable.c +++ b/arch/i386/mm/pgtable.c @@ -248,9 +248,15 @@ void pgd_ctor(void *pgd, struct kmem_cache *cache, unsigned long unused) clone_pgd_range((pgd_t *)pgd + USER_PTRS_PER_PGD, swapper_pg_dir + USER_PTRS_PER_PGD, KERNEL_PGD_PTRS); + if (PTRS_PER_PMD > 1) return; + /* must happen under lock */ + paravirt_alloc_pd_clone(__pa(pgd) >> PAGE_SHIFT, + __pa(swapper_pg_dir) >> PAGE_SHIFT, + USER_PTRS_PER_PGD, PTRS_PER_PGD - USER_PTRS_PER_PGD); + pgd_list_add(pgd); spin_unlock_irqrestore(&pgd_lock, flags); } @@ -260,6 +266,7 @@ void pgd_dtor(void *pgd, struct kmem_cache *cache, unsigned long unused) { unsigned long flags; /* can be called from interrupt context */ + paravirt_release_pd(__pa(pgd) >> PAGE_SHIFT); spin_lock_irqsave(&pgd_lock, flags); pgd_list_del(pgd); spin_unlock_irqrestore(&pgd_lock, flags); @@ -277,13 +284,18 @@ pgd_t *pgd_alloc(struct mm_struct *mm) pmd_t *pmd = kmem_cache_alloc(pmd_cache, GFP_KERNEL); if (!pmd) goto out_oom; + paravirt_alloc_pd(__pa(pmd) >> PAGE_SHIFT); set_pgd(&pgd[i], __pgd(1 + __pa(pmd))); } return pgd; out_oom: - for (i--; i >= 0; i--) - kmem_cache_free(pmd_cache, (void *)__va(pgd_val(pgd[i])-1)); + for (i--; i >= 0; i--) { + pgd_t pgdent = pgd[i]; + void* pmd = (void *)__va(pgd_val(pgdent)-1); + paravirt_release_pd(__pa(pmd) >> PAGE_SHIFT); + kmem_cache_free(pmd_cache, pmd); + } kmem_cache_free(pgd_cache, pgd); return NULL; } @@ -294,8 +306,12 @@ void pgd_free(pgd_t *pgd) /* in the PAE case user pgd entries are overwritten before usage */ if (PTRS_PER_PMD > 1) - for (i = 0; i < USER_PTRS_PER_PGD; ++i) - kmem_cache_free(pmd_cache, (void *)__va(pgd_val(pgd[i])-1)); + for (i = 0; i < USER_PTRS_PER_PGD; ++i) { + pgd_t pgdent = pgd[i]; + void* pmd = (void *)__va(pgd_val(pgdent)-1); + paravirt_release_pd(__pa(pmd) >> PAGE_SHIFT); + kmem_cache_free(pmd_cache, pmd); + } /* in the non-PAE case, free_pgtables() clears user pgd entries */ kmem_cache_free(pgd_cache, pgd); } diff --git a/include/asm-i386/paravirt.h b/include/asm-i386/paravirt.h index 9f06265..53da276 100644 --- a/include/asm-i386/paravirt.h +++ b/include/asm-i386/paravirt.h @@ -127,6 +127,12 @@ struct paravirt_ops void (fastcall *flush_tlb_kernel)(void); void (fastcall *flush_tlb_single)(u32 addr); + void (fastcall *alloc_pt)(u32 pfn); + void (fastcall *alloc_pd)(u32 pfn); + void (fastcall *alloc_pd_clone)(u32 pfn, u32 clonepfn, u32 start, u32 count); + void (fastcall *release_pt)(u32 pfn); + void (fastcall *release_pd)(u32 pfn); + void (fastcall *set_pte)(pte_t *ptep, pte_t pteval); void (fastcall *set_pte_at)(struct mm_struct *mm, u32 addr, pte_t *ptep, pte_t pteval); void (fastcall *set_pmd)(pmd_t *pmdp, pmd_t pmdval); @@ -320,6 +326,14 @@ static inline unsigned long apic_read(unsigned long reg) #define __flush_tlb_global() paravirt_ops.flush_tlb_kernel() #define __flush_tlb_single(addr) paravirt_ops.flush_tlb_single(addr) +#define paravirt_alloc_pt(pfn) paravirt_ops.alloc_pt(pfn) +#define paravirt_release_pt(pfn) paravirt_ops.release_pt(pfn) + +#define paravirt_alloc_pd(pfn) paravirt_ops.alloc_pd(pfn) +#define paravirt_alloc_pd_clone(pfn, clonepfn, start, count) \ + paravirt_ops.alloc_pd_clone(pfn, clonepfn, start, count) +#define paravirt_release_pd(pfn) paravirt_ops.release_pd(pfn) + static inline void set_pte(pte_t *ptep, pte_t pteval) { paravirt_ops.set_pte(ptep, pteval); diff --git a/include/asm-i386/pgalloc.h b/include/asm-i386/pgalloc.h index 4b1e613..c8dc2d0 100644 --- a/include/asm-i386/pgalloc.h +++ b/include/asm-i386/pgalloc.h @@ -5,13 +5,31 @@ #include #include /* for struct page */ -#define pmd_populate_kernel(mm, pmd, pte) \ - set_pmd(pmd, __pmd(_PAGE_TABLE + __pa(pte))) +#ifdef CONFIG_PARAVIRT +#include +#else +#define paravirt_alloc_pt(pfn) do { } while (0) +#define paravirt_alloc_pd(pfn) do { } while (0) +#define paravirt_alloc_pd(pfn) do { } while (0) +#define paravirt_alloc_pd_clone(pfn, clonepfn, start, count) do { } while (0) +#define paravirt_release_pt(pfn) do { } while (0) +#define paravirt_release_pd(pfn) do { } while (0) +#endif + +#define pmd_populate_kernel(mm, pmd, pte) \ +do { \ + paravirt_alloc_pt(__pa(pte) >> PAGE_SHIFT); \ + set_pmd(pmd, __pmd(_PAGE_TABLE + __pa(pte))); \ +} while (0) #define pmd_populate(mm, pmd, pte) \ +do { \ + paravirt_alloc_pt(page_to_pfn(pte)); \ set_pmd(pmd, __pmd(_PAGE_TABLE + \ ((unsigned long long)page_to_pfn(pte) << \ - (unsigned long long) PAGE_SHIFT))) + (unsigned long long) PAGE_SHIFT))); \ +} while (0) + /* * Allocate and free page tables. */ @@ -32,7 +50,11 @@ static inline void pte_free(struct page *pte) } -#define __pte_free_tlb(tlb,pte) tlb_remove_page((tlb),(pte)) +#define __pte_free_tlb(tlb,pte) \ +do { \ + paravirt_release_pt(page_to_pfn(pte)); \ + tlb_remove_page((tlb),(pte)); \ +} while (0) #ifdef CONFIG_X86_PAE /* -- cgit v0.10.2 From 9226d125d94c7e4964dd41cc5e9ca2ff84091d01 Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Tue, 13 Feb 2007 13:26:21 +0100 Subject: [PATCH] i386: paravirt CPU hypercall batching mode The VMI ROM has a mode where hypercalls can be queued and batched. This turns out to be a significant win during context switch, but must be done at a specific point before side effects to CPU state are visible to subsequent instructions. This is similar to the MMU batching hooks already provided. The same hooks could be used by the Xen backend to implement a context switch multicall. To explain a bit more about lazy modes in the paravirt patches, basically, the idea is that only one of lazy CPU or MMU mode can be active at any given time. Lazy MMU mode is similar to this lazy CPU mode, and allows for batching of multiple PTE updates (say, inside a remap loop), but to avoid keeping some kind of state machine about when to flush cpu or mmu updates, we just allow one or the other to be active. Although there is no real reason a more comprehensive scheme could not be implemented, there is also no demonstrated need for this extra complexity. Signed-off-by: Zachary Amsden Signed-off-by: Andi Kleen Cc: Andi Kleen Cc: Jeremy Fitzhardinge Cc: Rusty Russell Cc: Chris Wright Signed-off-by: Andrew Morton diff --git a/arch/i386/kernel/paravirt.c b/arch/i386/kernel/paravirt.c index 7329ec9..4dfdac4 100644 --- a/arch/i386/kernel/paravirt.c +++ b/arch/i386/kernel/paravirt.c @@ -545,6 +545,7 @@ struct paravirt_ops paravirt_ops = { .apic_write_atomic = native_apic_write_atomic, .apic_read = native_apic_read, #endif + .set_lazy_mode = (void *)native_nop, .flush_tlb_user = native_flush_tlb, .flush_tlb_kernel = native_flush_tlb_global, diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c index 23ae198..cfae587 100644 --- a/arch/i386/kernel/process.c +++ b/arch/i386/kernel/process.c @@ -670,14 +670,6 @@ struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct tas load_TLS(next, cpu); /* - * Restore %gs if needed (which is common) - */ - if (prev->gs | next->gs) - loadsegment(gs, next->gs); - - write_pda(pcurrent, next_p); - - /* * Now maybe handle debug registers and/or IO bitmaps */ if (unlikely((task_thread_info(next_p)->flags & _TIF_WORK_CTXSW) @@ -686,6 +678,15 @@ struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct tas disable_tsc(prev_p, next_p); + /* + * Leave lazy mode, flushing any hypercalls made here. + * This must be done before restoring TLS segments so + * the GDT and LDT are properly updated, and must be + * done before math_state_restore, so the TS bit is up + * to date. + */ + arch_leave_lazy_cpu_mode(); + /* If the task has used fpu the last 5 timeslices, just do a full * restore of the math state immediately to avoid the trap; the * chances of needing FPU soon are obviously high now @@ -693,6 +694,14 @@ struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct tas if (next_p->fpu_counter > 5) math_state_restore(); + /* + * Restore %gs if needed (which is common) + */ + if (prev->gs | next->gs) + loadsegment(gs, next->gs); + + write_pda(pcurrent, next_p); + return prev_p; } diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h index 9d774d0..00c2343 100644 --- a/include/asm-generic/pgtable.h +++ b/include/asm-generic/pgtable.h @@ -183,6 +183,19 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addres #endif /* + * A facility to provide batching of the reload of page tables with the + * actual context switch code for paravirtualized guests. By convention, + * only one of the lazy modes (CPU, MMU) should be active at any given + * time, entry should never be nested, and entry and exits should always + * be paired. This is for sanity of maintaining and reasoning about the + * kernel code. + */ +#ifndef __HAVE_ARCH_ENTER_LAZY_CPU_MODE +#define arch_enter_lazy_cpu_mode() do {} while (0) +#define arch_leave_lazy_cpu_mode() do {} while (0) +#endif + +/* * When walking page tables, get the address of the next boundary, * or the end address of the range if that comes earlier. Although no * vma end wraps to 0, rounded up __boundary may wrap to 0 throughout. diff --git a/include/asm-i386/paravirt.h b/include/asm-i386/paravirt.h index 53da276..38e5164 100644 --- a/include/asm-i386/paravirt.h +++ b/include/asm-i386/paravirt.h @@ -146,6 +146,8 @@ struct paravirt_ops void (fastcall *pmd_clear)(pmd_t *pmdp); #endif + void (fastcall *set_lazy_mode)(int mode); + /* These two are jmp to, not actually called. */ void (fastcall *irq_enable_sysexit)(void); void (fastcall *iret)(void); @@ -386,6 +388,19 @@ static inline void pmd_clear(pmd_t *pmdp) } #endif +/* Lazy mode for batching updates / context switch */ +#define PARAVIRT_LAZY_NONE 0 +#define PARAVIRT_LAZY_MMU 1 +#define PARAVIRT_LAZY_CPU 2 + +#define __HAVE_ARCH_ENTER_LAZY_CPU_MODE +#define arch_enter_lazy_cpu_mode() paravirt_ops.set_lazy_mode(PARAVIRT_LAZY_CPU) +#define arch_leave_lazy_cpu_mode() paravirt_ops.set_lazy_mode(PARAVIRT_LAZY_NONE) + +#define __HAVE_ARCH_ENTER_LAZY_MMU_MODE +#define arch_enter_lazy_mmu_mode() paravirt_ops.set_lazy_mode(PARAVIRT_LAZY_MMU) +#define arch_leave_lazy_mmu_mode() paravirt_ops.set_lazy_mode(PARAVIRT_LAZY_NONE) + /* These all sit in the .parainstructions section to tell us what to patch. */ struct paravirt_patch { u8 *instr; /* original instructions */ diff --git a/kernel/sched.c b/kernel/sched.c index 08f8617..0dc7572 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1853,6 +1853,13 @@ context_switch(struct rq *rq, struct task_struct *prev, struct mm_struct *mm = next->mm; struct mm_struct *oldmm = prev->active_mm; + /* + * For paravirt, this is coupled with an exit in switch_to to + * combine the page table reload and the switch backend into + * one hypercall. + */ + arch_enter_lazy_cpu_mode(); + if (!mm) { next->active_mm = oldmm; atomic_inc(&oldmm->mm_count); -- cgit v0.10.2 From 8b15114434998a78aa50f8559d69c7a400cff267 Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Tue, 13 Feb 2007 13:26:21 +0100 Subject: [PATCH] i386: iOPL handling for paravirt guests I found a clever way to make the extra IOPL switching invisible to non-paravirt compiles - since kernel_rpl is statically defined to be zero there, and only non-zero rpl kernel have a problem restoring IOPL, as popf does not restore IOPL flags unless run at CPL-0. Signed-off-by: Zachary Amsden Signed-off-by: Andi Kleen Cc: Andi Kleen Cc: Jeremy Fitzhardinge Cc: Rusty Russell Cc: Chris Wright Signed-off-by: Andrew Morton diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c index cfae587..05be774 100644 --- a/arch/i386/kernel/process.c +++ b/arch/i386/kernel/process.c @@ -670,6 +670,15 @@ struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct tas load_TLS(next, cpu); /* + * Restore IOPL if needed. In normal use, the flags restore + * in the switch assembly will handle this. But if the kernel + * is running virtualized at a non-zero CPL, the popf will + * not restore flags, so it must be done in a separate step. + */ + if (get_kernel_rpl() && unlikely(prev->iopl != next->iopl)) + set_iopl_mask(next->iopl); + + /* * Now maybe handle debug registers and/or IO bitmaps */ if (unlikely((task_thread_info(next_p)->flags & _TIF_WORK_CTXSW) -- cgit v0.10.2 From ae5da273fe3352febd38658d8d34484cbcfb3423 Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Tue, 13 Feb 2007 13:26:21 +0100 Subject: [PATCH] i386: SMP boot hook for paravirt Add VMI SMP boot hook. We emulate a regular boot sequence and use the same APIC IPI initiation, we just poke magic values to load into the CPU state when the startup IPI is received, rather than having to jump through a real mode trampoline. This is all that was needed to get SMP to work. Signed-off-by: Zachary Amsden Signed-off-by: Andi Kleen Cc: Andi Kleen Cc: Jeremy Fitzhardinge Cc: Rusty Russell Cc: Chris Wright Signed-off-by: Andrew Morton diff --git a/arch/i386/kernel/paravirt.c b/arch/i386/kernel/paravirt.c index 4dfdac4..5bf8105 100644 --- a/arch/i386/kernel/paravirt.c +++ b/arch/i386/kernel/paravirt.c @@ -572,6 +572,8 @@ struct paravirt_ops paravirt_ops = { .irq_enable_sysexit = native_irq_enable_sysexit, .iret = native_iret, + + .startup_ipi_hook = (void *)native_nop, }; /* diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index 8c6c8c5..1908afa 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -835,6 +835,13 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip) num_starts = 0; /* + * Paravirt / VMI wants a startup IPI hook here to set up the + * target processor state. + */ + startup_ipi_hook(phys_apicid, (unsigned long) start_secondary, + (unsigned long) stack_start.esp); + + /* * Run STARTUP IPI loop. */ Dprintk("#startup loops: %d.\n", num_starts); diff --git a/include/asm-i386/paravirt.h b/include/asm-i386/paravirt.h index 38e5164..6ccf364 100644 --- a/include/asm-i386/paravirt.h +++ b/include/asm-i386/paravirt.h @@ -151,6 +151,8 @@ struct paravirt_ops /* These two are jmp to, not actually called. */ void (fastcall *irq_enable_sysexit)(void); void (fastcall *iret)(void); + + void (fastcall *startup_ipi_hook)(int phys_apicid, unsigned long start_eip, unsigned long start_esp); }; /* Mark a paravirt probe function. */ @@ -323,6 +325,13 @@ static inline unsigned long apic_read(unsigned long reg) } #endif +#ifdef CONFIG_SMP +static inline void startup_ipi_hook(int phys_apicid, unsigned long start_eip, + unsigned long start_esp) +{ + return paravirt_ops.startup_ipi_hook(phys_apicid, start_eip, start_esp); +} +#endif #define __flush_tlb() paravirt_ops.flush_tlb_user() #define __flush_tlb_global() paravirt_ops.flush_tlb_kernel() diff --git a/include/asm-i386/smp.h b/include/asm-i386/smp.h index 64fe624..6bf0033 100644 --- a/include/asm-i386/smp.h +++ b/include/asm-i386/smp.h @@ -52,6 +52,11 @@ extern void cpu_exit_clear(void); extern void cpu_uninit(void); #endif +#ifndef CONFIG_PARAVIRT +#define startup_ipi_hook(phys_apicid, start_eip, start_esp) \ +do { } while (0) +#endif + /* * This function is needed by all SMP systems. It must _always_ be valid * from the initial startup. We map APIC_BASE very early in page_setup(), -- cgit v0.10.2 From 7ce0bcfd1667736f1293cff845139bbee53186de Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Tue, 13 Feb 2007 13:26:21 +0100 Subject: [PATCH] i386: vMI backend for paravirt-ops Fairly straightforward implementation of VMI backend for paravirt-ops. [Adrian Bunk: some cleanups] Signed-off-by: Zachary Amsden Signed-off-by: Andi Kleen Cc: Andi Kleen Cc: Jeremy Fitzhardinge Cc: Rusty Russell Cc: Chris Wright Signed-off-by: Andrew Morton diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index 63d5e84..a3b3f6e 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -203,6 +203,15 @@ config PARAVIRT However, when run without a hypervisor the kernel is theoretically slower. If in doubt, say N. +config VMI + bool "VMI Paravirt-ops support" + depends on PARAVIRT + default y + help + VMI provides a paravirtualized interface to multiple hypervisors + include VMware ESX server and Xen by connecting to a ROM module + provided by the hypervisor. + config ACPI_SRAT bool default y diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index 1e8988e..9cfb589 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -40,6 +40,8 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_HPET_TIMER) += hpet.o obj-$(CONFIG_K8_NB) += k8.o +obj-$(CONFIG_VMI) += vmi.o + # Make sure this is linked after any other paravirt_ops structs: see head.S obj-$(CONFIG_PARAVIRT) += paravirt.o diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S index 15336c8..6c7f711 100644 --- a/arch/i386/kernel/head.S +++ b/arch/i386/kernel/head.S @@ -360,7 +360,7 @@ check_x87: * cpu_gdt_table and boot_pda; for secondary CPUs, these will be * that CPU's GDT and PDA. */ -setup_pda: +ENTRY(setup_pda) /* get the PDA pointer */ movl start_pda, %eax diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index 1711f4e..e30cced 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -1920,7 +1920,7 @@ static void __init setup_ioapic_ids_from_mpc(void) static void __init setup_ioapic_ids_from_mpc(void) { } #endif -static int no_timer_check __initdata; +int no_timer_check __initdata; static int __init notimercheck(char *s) { diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index 4694ac9..bd8c218 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -60,6 +60,7 @@ #include #include #include +#include #include #include @@ -581,6 +582,14 @@ void __init setup_arch(char **cmdline_p) max_low_pfn = setup_memory(); +#ifdef CONFIG_VMI + /* + * Must be after max_low_pfn is determined, and before kernel + * pagetables are setup. + */ + vmi_init(); +#endif + /* * NOTE: before this point _nobody_ is allowed to allocate * any memory using the bootmem allocator. Although the diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index 1908afa..42502d8 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -63,6 +63,7 @@ #include #include #include +#include /* Set if we find a B stepping CPU */ static int __devinitdata smp_b_stepping; @@ -545,6 +546,9 @@ static void __cpuinit start_secondary(void *unused) * booting is too fragile that we want to limit the * things done here to the most necessary things. */ +#ifdef CONFIG_VMI + vmi_bringup(); +#endif secondary_cpu_init(); preempt_disable(); smp_callin(); diff --git a/arch/i386/kernel/vmi.c b/arch/i386/kernel/vmi.c new file mode 100644 index 0000000..a94d64b --- /dev/null +++ b/arch/i386/kernel/vmi.c @@ -0,0 +1,904 @@ +/* + * VMI specific paravirt-ops implementation + * + * Copyright (C) 2005, VMware, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to zach@vmware.com + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Convenient for calling VMI functions indirectly in the ROM */ +typedef u32 __attribute__((regparm(1))) (VROMFUNC)(void); +typedef u64 __attribute__((regparm(2))) (VROMLONGFUNC)(int); + +#define call_vrom_func(rom,func) \ + (((VROMFUNC *)(rom->func))()) + +#define call_vrom_long_func(rom,func,arg) \ + (((VROMLONGFUNC *)(rom->func)) (arg)) + +static struct vrom_header *vmi_rom; +static int license_gplok; +static int disable_nodelay; +static int disable_pge; +static int disable_pse; +static int disable_sep; +static int disable_tsc; +static int disable_mtrr; + +/* Cached VMI operations */ +struct { + void (*cpuid)(void /* non-c */); + void (*_set_ldt)(u32 selector); + void (*set_tr)(u32 selector); + void (*set_kernel_stack)(u32 selector, u32 esp0); + void (*allocate_page)(u32, u32, u32, u32, u32); + void (*release_page)(u32, u32); + void (*set_pte)(pte_t, pte_t *, unsigned); + void (*update_pte)(pte_t *, unsigned); + void (*set_linear_mapping)(int, u32, u32, u32); + void (*flush_tlb)(int); + void (*set_initial_ap_state)(int, int); +} vmi_ops; + +/* XXX move this to alternative.h */ +extern struct paravirt_patch __start_parainstructions[], + __stop_parainstructions[]; + +/* + * VMI patching routines. + */ +#define MNEM_CALL 0xe8 +#define MNEM_JMP 0xe9 +#define MNEM_RET 0xc3 + +static char irq_save_disable_callout[] = { + MNEM_CALL, 0, 0, 0, 0, + MNEM_CALL, 0, 0, 0, 0, + MNEM_RET +}; +#define IRQ_PATCH_INT_MASK 0 +#define IRQ_PATCH_DISABLE 5 + +static inline void patch_offset(unsigned char *eip, unsigned char *dest) +{ + *(unsigned long *)(eip+1) = dest-eip-5; +} + +static unsigned patch_internal(int call, unsigned len, void *insns) +{ + u64 reloc; + struct vmi_relocation_info *const rel = (struct vmi_relocation_info *)&reloc; + reloc = call_vrom_long_func(vmi_rom, get_reloc, call); + switch(rel->type) { + case VMI_RELOCATION_CALL_REL: + BUG_ON(len < 5); + *(char *)insns = MNEM_CALL; + patch_offset(insns, rel->eip); + return 5; + + case VMI_RELOCATION_JUMP_REL: + BUG_ON(len < 5); + *(char *)insns = MNEM_JMP; + patch_offset(insns, rel->eip); + return 5; + + case VMI_RELOCATION_NOP: + /* obliterate the whole thing */ + return 0; + + case VMI_RELOCATION_NONE: + /* leave native code in place */ + break; + + default: + BUG(); + } + return len; +} + +/* + * Apply patch if appropriate, return length of new instruction + * sequence. The callee does nop padding for us. + */ +static unsigned vmi_patch(u8 type, u16 clobbers, void *insns, unsigned len) +{ + switch (type) { + case PARAVIRT_IRQ_DISABLE: + return patch_internal(VMI_CALL_DisableInterrupts, len, insns); + case PARAVIRT_IRQ_ENABLE: + return patch_internal(VMI_CALL_EnableInterrupts, len, insns); + case PARAVIRT_RESTORE_FLAGS: + return patch_internal(VMI_CALL_SetInterruptMask, len, insns); + case PARAVIRT_SAVE_FLAGS: + return patch_internal(VMI_CALL_GetInterruptMask, len, insns); + case PARAVIRT_SAVE_FLAGS_IRQ_DISABLE: + if (len >= 10) { + patch_internal(VMI_CALL_GetInterruptMask, len, insns); + patch_internal(VMI_CALL_DisableInterrupts, len-5, insns+5); + return 10; + } else { + /* + * You bastards didn't leave enough room to + * patch save_flags_irq_disable inline. Patch + * to a helper + */ + BUG_ON(len < 5); + *(char *)insns = MNEM_CALL; + patch_offset(insns, irq_save_disable_callout); + return 5; + } + case PARAVIRT_INTERRUPT_RETURN: + return patch_internal(VMI_CALL_IRET, len, insns); + case PARAVIRT_STI_SYSEXIT: + return patch_internal(VMI_CALL_SYSEXIT, len, insns); + default: + break; + } + return len; +} + +/* CPUID has non-C semantics, and paravirt-ops API doesn't match hardware ISA */ +static void vmi_cpuid(unsigned int *eax, unsigned int *ebx, + unsigned int *ecx, unsigned int *edx) +{ + int override = 0; + if (*eax == 1) + override = 1; + asm volatile ("call *%6" + : "=a" (*eax), + "=b" (*ebx), + "=c" (*ecx), + "=d" (*edx) + : "0" (*eax), "2" (*ecx), "r" (vmi_ops.cpuid)); + if (override) { + if (disable_pse) + *edx &= ~X86_FEATURE_PSE; + if (disable_pge) + *edx &= ~X86_FEATURE_PGE; + if (disable_sep) + *edx &= ~X86_FEATURE_SEP; + if (disable_tsc) + *edx &= ~X86_FEATURE_TSC; + if (disable_mtrr) + *edx &= ~X86_FEATURE_MTRR; + } +} + +static inline void vmi_maybe_load_tls(struct desc_struct *gdt, int nr, struct desc_struct *new) +{ + if (gdt[nr].a != new->a || gdt[nr].b != new->b) + write_gdt_entry(gdt, nr, new->a, new->b); +} + +static void vmi_load_tls(struct thread_struct *t, unsigned int cpu) +{ + struct desc_struct *gdt = get_cpu_gdt_table(cpu); + vmi_maybe_load_tls(gdt, GDT_ENTRY_TLS_MIN + 0, &t->tls_array[0]); + vmi_maybe_load_tls(gdt, GDT_ENTRY_TLS_MIN + 1, &t->tls_array[1]); + vmi_maybe_load_tls(gdt, GDT_ENTRY_TLS_MIN + 2, &t->tls_array[2]); +} + +static void vmi_set_ldt(const void *addr, unsigned entries) +{ + unsigned cpu = smp_processor_id(); + u32 low, high; + + pack_descriptor(&low, &high, (unsigned long)addr, + entries * sizeof(struct desc_struct) - 1, + DESCTYPE_LDT, 0); + write_gdt_entry(get_cpu_gdt_table(cpu), GDT_ENTRY_LDT, low, high); + vmi_ops._set_ldt(entries ? GDT_ENTRY_LDT*sizeof(struct desc_struct) : 0); +} + +static void vmi_set_tr(void) +{ + vmi_ops.set_tr(GDT_ENTRY_TSS*sizeof(struct desc_struct)); +} + +static void vmi_load_esp0(struct tss_struct *tss, + struct thread_struct *thread) +{ + tss->esp0 = thread->esp0; + + /* This can only happen when SEP is enabled, no need to test "SEP"arately */ + if (unlikely(tss->ss1 != thread->sysenter_cs)) { + tss->ss1 = thread->sysenter_cs; + wrmsr(MSR_IA32_SYSENTER_CS, thread->sysenter_cs, 0); + } + vmi_ops.set_kernel_stack(__KERNEL_DS, tss->esp0); +} + +static void vmi_flush_tlb_user(void) +{ + vmi_ops.flush_tlb(VMI_FLUSH_TLB); +} + +static void vmi_flush_tlb_kernel(void) +{ + vmi_ops.flush_tlb(VMI_FLUSH_TLB | VMI_FLUSH_GLOBAL); +} + +/* Stub to do nothing at all; used for delays and unimplemented calls */ +static void vmi_nop(void) +{ +} + + +#ifdef CONFIG_DEBUG_PAGE_TYPE + +#ifdef CONFIG_X86_PAE +#define MAX_BOOT_PTS (2048+4+1) +#else +#define MAX_BOOT_PTS (1024+1) +#endif + +/* + * During boot, mem_map is not yet available in paging_init, so stash + * all the boot page allocations here. + */ +static struct { + u32 pfn; + int type; +} boot_page_allocations[MAX_BOOT_PTS]; +static int num_boot_page_allocations; +static int boot_allocations_applied; + +void vmi_apply_boot_page_allocations(void) +{ + int i; + BUG_ON(!mem_map); + for (i = 0; i < num_boot_page_allocations; i++) { + struct page *page = pfn_to_page(boot_page_allocations[i].pfn); + page->type = boot_page_allocations[i].type; + page->type = boot_page_allocations[i].type & + ~(VMI_PAGE_ZEROED | VMI_PAGE_CLONE); + } + boot_allocations_applied = 1; +} + +static void record_page_type(u32 pfn, int type) +{ + BUG_ON(num_boot_page_allocations >= MAX_BOOT_PTS); + boot_page_allocations[num_boot_page_allocations].pfn = pfn; + boot_page_allocations[num_boot_page_allocations].type = type; + num_boot_page_allocations++; +} + +static void check_zeroed_page(u32 pfn, int type, struct page *page) +{ + u32 *ptr; + int i; + int limit = PAGE_SIZE / sizeof(int); + + if (page_address(page)) + ptr = (u32 *)page_address(page); + else + ptr = (u32 *)__va(pfn << PAGE_SHIFT); + /* + * When cloning the root in non-PAE mode, only the userspace + * pdes need to be zeroed. + */ + if (type & VMI_PAGE_CLONE) + limit = USER_PTRS_PER_PGD; + for (i = 0; i < limit; i++) + BUG_ON(ptr[i]); +} + +/* + * We stash the page type into struct page so we can verify the page + * types are used properly. + */ +static void vmi_set_page_type(u32 pfn, int type) +{ + /* PAE can have multiple roots per page - don't track */ + if (PTRS_PER_PMD > 1 && (type & VMI_PAGE_PDP)) + return; + + if (boot_allocations_applied) { + struct page *page = pfn_to_page(pfn); + if (type != VMI_PAGE_NORMAL) + BUG_ON(page->type); + else + BUG_ON(page->type == VMI_PAGE_NORMAL); + page->type = type & ~(VMI_PAGE_ZEROED | VMI_PAGE_CLONE); + if (type & VMI_PAGE_ZEROED) + check_zeroed_page(pfn, type, page); + } else { + record_page_type(pfn, type); + } +} + +static void vmi_check_page_type(u32 pfn, int type) +{ + /* PAE can have multiple roots per page - skip checks */ + if (PTRS_PER_PMD > 1 && (type & VMI_PAGE_PDP)) + return; + + type &= ~(VMI_PAGE_ZEROED | VMI_PAGE_CLONE); + if (boot_allocations_applied) { + struct page *page = pfn_to_page(pfn); + BUG_ON((page->type ^ type) & VMI_PAGE_PAE); + BUG_ON(type == VMI_PAGE_NORMAL && page->type); + BUG_ON((type & page->type) == 0); + } +} +#else +#define vmi_set_page_type(p,t) do { } while (0) +#define vmi_check_page_type(p,t) do { } while (0) +#endif + +static void vmi_allocate_pt(u32 pfn) +{ + vmi_set_page_type(pfn, VMI_PAGE_L1); + vmi_ops.allocate_page(pfn, VMI_PAGE_L1, 0, 0, 0); +} + +static void vmi_allocate_pd(u32 pfn) +{ + /* + * This call comes in very early, before mem_map is setup. + * It is called only for swapper_pg_dir, which already has + * data on it. + */ + vmi_set_page_type(pfn, VMI_PAGE_L2); + vmi_ops.allocate_page(pfn, VMI_PAGE_L2, 0, 0, 0); +} + +static void vmi_allocate_pd_clone(u32 pfn, u32 clonepfn, u32 start, u32 count) +{ + vmi_set_page_type(pfn, VMI_PAGE_L2 | VMI_PAGE_CLONE); + vmi_check_page_type(clonepfn, VMI_PAGE_L2); + vmi_ops.allocate_page(pfn, VMI_PAGE_L2 | VMI_PAGE_CLONE, clonepfn, start, count); +} + +static void vmi_release_pt(u32 pfn) +{ + vmi_ops.release_page(pfn, VMI_PAGE_L1); + vmi_set_page_type(pfn, VMI_PAGE_NORMAL); +} + +static void vmi_release_pd(u32 pfn) +{ + vmi_ops.release_page(pfn, VMI_PAGE_L2); + vmi_set_page_type(pfn, VMI_PAGE_NORMAL); +} + +/* + * Helper macros for MMU update flags. We can defer updates until a flush + * or page invalidation only if the update is to the current address space + * (otherwise, there is no flush). We must check against init_mm, since + * this could be a kernel update, which usually passes init_mm, although + * sometimes this check can be skipped if we know the particular function + * is only called on user mode PTEs. We could change the kernel to pass + * current->active_mm here, but in particular, I was unsure if changing + * mm/highmem.c to do this would still be correct on other architectures. + */ +#define is_current_as(mm, mustbeuser) ((mm) == current->active_mm || \ + (!mustbeuser && (mm) == &init_mm)) +#define vmi_flags_addr(mm, addr, level, user) \ + ((level) | (is_current_as(mm, user) ? \ + (VMI_PAGE_CURRENT_AS | ((addr) & VMI_PAGE_VA_MASK)) : 0)) +#define vmi_flags_addr_defer(mm, addr, level, user) \ + ((level) | (is_current_as(mm, user) ? \ + (VMI_PAGE_DEFER | VMI_PAGE_CURRENT_AS | ((addr) & VMI_PAGE_VA_MASK)) : 0)) + +static void vmi_update_pte(struct mm_struct *mm, u32 addr, pte_t *ptep) +{ + vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE); + vmi_ops.update_pte(ptep, vmi_flags_addr(mm, addr, VMI_PAGE_PT, 0)); +} + +static void vmi_update_pte_defer(struct mm_struct *mm, u32 addr, pte_t *ptep) +{ + vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE); + vmi_ops.update_pte(ptep, vmi_flags_addr_defer(mm, addr, VMI_PAGE_PT, 0)); +} + +static void vmi_set_pte(pte_t *ptep, pte_t pte) +{ + /* XXX because of set_pmd_pte, this can be called on PT or PD layers */ + vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE | VMI_PAGE_PD); + vmi_ops.set_pte(pte, ptep, VMI_PAGE_PT); +} + +static void vmi_set_pte_at(struct mm_struct *mm, u32 addr, pte_t *ptep, pte_t pte) +{ + vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE); + vmi_ops.set_pte(pte, ptep, vmi_flags_addr(mm, addr, VMI_PAGE_PT, 0)); +} + +static void vmi_set_pmd(pmd_t *pmdp, pmd_t pmdval) +{ +#ifdef CONFIG_X86_PAE + const pte_t pte = { pmdval.pmd, pmdval.pmd >> 32 }; + vmi_check_page_type(__pa(pmdp) >> PAGE_SHIFT, VMI_PAGE_PMD); +#else + const pte_t pte = { pmdval.pud.pgd.pgd }; + vmi_check_page_type(__pa(pmdp) >> PAGE_SHIFT, VMI_PAGE_PGD); +#endif + vmi_ops.set_pte(pte, (pte_t *)pmdp, VMI_PAGE_PD); +} + +#ifdef CONFIG_X86_PAE + +static void vmi_set_pte_atomic(pte_t *ptep, pte_t pteval) +{ + /* + * XXX This is called from set_pmd_pte, but at both PT + * and PD layers so the VMI_PAGE_PT flag is wrong. But + * it is only called for large page mapping changes, + * the Xen backend, doesn't support large pages, and the + * ESX backend doesn't depend on the flag. + */ + set_64bit((unsigned long long *)ptep,pte_val(pteval)); + vmi_ops.update_pte(ptep, VMI_PAGE_PT); +} + +static void vmi_set_pte_present(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte) +{ + vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE); + vmi_ops.set_pte(pte, ptep, vmi_flags_addr_defer(mm, addr, VMI_PAGE_PT, 1)); +} + +static void vmi_set_pud(pud_t *pudp, pud_t pudval) +{ + /* Um, eww */ + const pte_t pte = { pudval.pgd.pgd, pudval.pgd.pgd >> 32 }; + vmi_check_page_type(__pa(pudp) >> PAGE_SHIFT, VMI_PAGE_PGD); + vmi_ops.set_pte(pte, (pte_t *)pudp, VMI_PAGE_PDP); +} + +static void vmi_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ + const pte_t pte = { 0 }; + vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE); + vmi_ops.set_pte(pte, ptep, vmi_flags_addr(mm, addr, VMI_PAGE_PT, 0)); +} + +void vmi_pmd_clear(pmd_t *pmd) +{ + const pte_t pte = { 0 }; + vmi_check_page_type(__pa(pmd) >> PAGE_SHIFT, VMI_PAGE_PMD); + vmi_ops.set_pte(pte, (pte_t *)pmd, VMI_PAGE_PD); +} +#endif + +#ifdef CONFIG_SMP +struct vmi_ap_state ap; +extern void setup_pda(void); + +static void __init /* XXX cpu hotplug */ +vmi_startup_ipi_hook(int phys_apicid, unsigned long start_eip, + unsigned long start_esp) +{ + /* Default everything to zero. This is fine for most GPRs. */ + memset(&ap, 0, sizeof(struct vmi_ap_state)); + + ap.gdtr_limit = GDT_SIZE - 1; + ap.gdtr_base = (unsigned long) get_cpu_gdt_table(phys_apicid); + + ap.idtr_limit = IDT_ENTRIES * 8 - 1; + ap.idtr_base = (unsigned long) idt_table; + + ap.ldtr = 0; + + ap.cs = __KERNEL_CS; + ap.eip = (unsigned long) start_eip; + ap.ss = __KERNEL_DS; + ap.esp = (unsigned long) start_esp; + + ap.ds = __USER_DS; + ap.es = __USER_DS; + ap.fs = __KERNEL_PDA; + ap.gs = 0; + + ap.eflags = 0; + + setup_pda(); + +#ifdef CONFIG_X86_PAE + /* efer should match BSP efer. */ + if (cpu_has_nx) { + unsigned l, h; + rdmsr(MSR_EFER, l, h); + ap.efer = (unsigned long long) h << 32 | l; + } +#endif + + ap.cr3 = __pa(swapper_pg_dir); + /* Protected mode, paging, AM, WP, NE, MP. */ + ap.cr0 = 0x80050023; + ap.cr4 = mmu_cr4_features; + vmi_ops.set_initial_ap_state(__pa(&ap), phys_apicid); +} +#endif + +static inline int __init check_vmi_rom(struct vrom_header *rom) +{ + struct pci_header *pci; + struct pnp_header *pnp; + const char *manufacturer = "UNKNOWN"; + const char *product = "UNKNOWN"; + const char *license = "unspecified"; + + if (rom->rom_signature != 0xaa55) + return 0; + if (rom->vrom_signature != VMI_SIGNATURE) + return 0; + if (rom->api_version_maj != VMI_API_REV_MAJOR || + rom->api_version_min+1 < VMI_API_REV_MINOR+1) { + printk(KERN_WARNING "VMI: Found mismatched rom version %d.%d\n", + rom->api_version_maj, + rom->api_version_min); + return 0; + } + + /* + * Relying on the VMI_SIGNATURE field is not 100% safe, so check + * the PCI header and device type to make sure this is really a + * VMI device. + */ + if (!rom->pci_header_offs) { + printk(KERN_WARNING "VMI: ROM does not contain PCI header.\n"); + return 0; + } + + pci = (struct pci_header *)((char *)rom+rom->pci_header_offs); + if (pci->vendorID != PCI_VENDOR_ID_VMWARE || + pci->deviceID != PCI_DEVICE_ID_VMWARE_VMI) { + /* Allow it to run... anyways, but warn */ + printk(KERN_WARNING "VMI: ROM from unknown manufacturer\n"); + } + + if (rom->pnp_header_offs) { + pnp = (struct pnp_header *)((char *)rom+rom->pnp_header_offs); + if (pnp->manufacturer_offset) + manufacturer = (const char *)rom+pnp->manufacturer_offset; + if (pnp->product_offset) + product = (const char *)rom+pnp->product_offset; + } + + if (rom->license_offs) + license = (char *)rom+rom->license_offs; + + printk(KERN_INFO "VMI: Found %s %s, API version %d.%d, ROM version %d.%d\n", + manufacturer, product, + rom->api_version_maj, rom->api_version_min, + pci->rom_version_maj, pci->rom_version_min); + + license_gplok = license_is_gpl_compatible(license); + if (!license_gplok) { + printk(KERN_WARNING "VMI: ROM license '%s' taints kernel... " + "inlining disabled\n", + license); + add_taint(TAINT_PROPRIETARY_MODULE); + } + return 1; +} + +/* + * Probe for the VMI option ROM + */ +static inline int __init probe_vmi_rom(void) +{ + unsigned long base; + + /* VMI ROM is in option ROM area, check signature */ + for (base = 0xC0000; base < 0xE0000; base += 2048) { + struct vrom_header *romstart; + romstart = (struct vrom_header *)isa_bus_to_virt(base); + if (check_vmi_rom(romstart)) { + vmi_rom = romstart; + return 1; + } + } + return 0; +} + +/* + * VMI setup common to all processors + */ +void vmi_bringup(void) +{ + /* We must establish the lowmem mapping for MMU ops to work */ + if (vmi_rom) + vmi_ops.set_linear_mapping(0, __PAGE_OFFSET, max_low_pfn, 0); +} + +/* + * Return a pointer to the VMI function or a NOP stub + */ +static void *vmi_get_function(int vmicall) +{ + u64 reloc; + const struct vmi_relocation_info *rel = (struct vmi_relocation_info *)&reloc; + reloc = call_vrom_long_func(vmi_rom, get_reloc, vmicall); + BUG_ON(rel->type == VMI_RELOCATION_JUMP_REL); + if (rel->type == VMI_RELOCATION_CALL_REL) + return (void *)rel->eip; + else + return (void *)vmi_nop; +} + +/* + * Helper macro for making the VMI paravirt-ops fill code readable. + * For unimplemented operations, fall back to default. + */ +#define para_fill(opname, vmicall) \ +do { \ + reloc = call_vrom_long_func(vmi_rom, get_reloc, \ + VMI_CALL_##vmicall); \ + if (rel->type != VMI_RELOCATION_NONE) { \ + BUG_ON(rel->type != VMI_RELOCATION_CALL_REL); \ + paravirt_ops.opname = (void *)rel->eip; \ + } \ +} while (0) + +/* + * Activate the VMI interface and switch into paravirtualized mode + */ +static inline int __init activate_vmi(void) +{ + short kernel_cs; + u64 reloc; + const struct vmi_relocation_info *rel = (struct vmi_relocation_info *)&reloc; + + if (call_vrom_func(vmi_rom, vmi_init) != 0) { + printk(KERN_ERR "VMI ROM failed to initialize!"); + return 0; + } + savesegment(cs, kernel_cs); + + paravirt_ops.paravirt_enabled = 1; + paravirt_ops.kernel_rpl = kernel_cs & SEGMENT_RPL_MASK; + + paravirt_ops.patch = vmi_patch; + paravirt_ops.name = "vmi"; + + /* + * Many of these operations are ABI compatible with VMI. + * This means we can fill in the paravirt-ops with direct + * pointers into the VMI ROM. If the calling convention for + * these operations changes, this code needs to be updated. + * + * Exceptions + * CPUID paravirt-op uses pointers, not the native ISA + * halt has no VMI equivalent; all VMI halts are "safe" + * no MSR support yet - just trap and emulate. VMI uses the + * same ABI as the native ISA, but Linux wants exceptions + * from bogus MSR read / write handled + * rdpmc is not yet used in Linux + */ + + /* CPUID is special, so very special */ + reloc = call_vrom_long_func(vmi_rom, get_reloc, VMI_CALL_CPUID); + if (rel->type != VMI_RELOCATION_NONE) { + BUG_ON(rel->type != VMI_RELOCATION_CALL_REL); + vmi_ops.cpuid = (void *)rel->eip; + paravirt_ops.cpuid = vmi_cpuid; + } + + para_fill(clts, CLTS); + para_fill(get_debugreg, GetDR); + para_fill(set_debugreg, SetDR); + para_fill(read_cr0, GetCR0); + para_fill(read_cr2, GetCR2); + para_fill(read_cr3, GetCR3); + para_fill(read_cr4, GetCR4); + para_fill(write_cr0, SetCR0); + para_fill(write_cr2, SetCR2); + para_fill(write_cr3, SetCR3); + para_fill(write_cr4, SetCR4); + para_fill(save_fl, GetInterruptMask); + para_fill(restore_fl, SetInterruptMask); + para_fill(irq_disable, DisableInterrupts); + para_fill(irq_enable, EnableInterrupts); + /* irq_save_disable !!! sheer pain */ + patch_offset(&irq_save_disable_callout[IRQ_PATCH_INT_MASK], + (char *)paravirt_ops.save_fl); + patch_offset(&irq_save_disable_callout[IRQ_PATCH_DISABLE], + (char *)paravirt_ops.irq_disable); + para_fill(safe_halt, Halt); + para_fill(wbinvd, WBINVD); + /* paravirt_ops.read_msr = vmi_rdmsr */ + /* paravirt_ops.write_msr = vmi_wrmsr */ + para_fill(read_tsc, RDTSC); + /* paravirt_ops.rdpmc = vmi_rdpmc */ + + /* TR interface doesn't pass TR value */ + reloc = call_vrom_long_func(vmi_rom, get_reloc, VMI_CALL_SetTR); + if (rel->type != VMI_RELOCATION_NONE) { + BUG_ON(rel->type != VMI_RELOCATION_CALL_REL); + vmi_ops.set_tr = (void *)rel->eip; + paravirt_ops.load_tr_desc = vmi_set_tr; + } + + /* LDT is special, too */ + reloc = call_vrom_long_func(vmi_rom, get_reloc, VMI_CALL_SetLDT); + if (rel->type != VMI_RELOCATION_NONE) { + BUG_ON(rel->type != VMI_RELOCATION_CALL_REL); + vmi_ops._set_ldt = (void *)rel->eip; + paravirt_ops.set_ldt = vmi_set_ldt; + } + + para_fill(load_gdt, SetGDT); + para_fill(load_idt, SetIDT); + para_fill(store_gdt, GetGDT); + para_fill(store_idt, GetIDT); + para_fill(store_tr, GetTR); + paravirt_ops.load_tls = vmi_load_tls; + para_fill(write_ldt_entry, WriteLDTEntry); + para_fill(write_gdt_entry, WriteGDTEntry); + para_fill(write_idt_entry, WriteIDTEntry); + reloc = call_vrom_long_func(vmi_rom, get_reloc, + VMI_CALL_UpdateKernelStack); + if (rel->type != VMI_RELOCATION_NONE) { + BUG_ON(rel->type != VMI_RELOCATION_CALL_REL); + vmi_ops.set_kernel_stack = (void *)rel->eip; + paravirt_ops.load_esp0 = vmi_load_esp0; + } + + para_fill(set_iopl_mask, SetIOPLMask); + paravirt_ops.io_delay = (void *)vmi_nop; + if (!disable_nodelay) { + paravirt_ops.const_udelay = (void *)vmi_nop; + } + + para_fill(set_lazy_mode, SetLazyMode); + + reloc = call_vrom_long_func(vmi_rom, get_reloc, VMI_CALL_FlushTLB); + if (rel->type != VMI_RELOCATION_NONE) { + vmi_ops.flush_tlb = (void *)rel->eip; + paravirt_ops.flush_tlb_user = vmi_flush_tlb_user; + paravirt_ops.flush_tlb_kernel = vmi_flush_tlb_kernel; + } + para_fill(flush_tlb_single, InvalPage); + + /* + * Until a standard flag format can be agreed on, we need to + * implement these as wrappers in Linux. Get the VMI ROM + * function pointers for the two backend calls. + */ +#ifdef CONFIG_X86_PAE + vmi_ops.set_pte = vmi_get_function(VMI_CALL_SetPxELong); + vmi_ops.update_pte = vmi_get_function(VMI_CALL_UpdatePxELong); +#else + vmi_ops.set_pte = vmi_get_function(VMI_CALL_SetPxE); + vmi_ops.update_pte = vmi_get_function(VMI_CALL_UpdatePxE); +#endif + vmi_ops.set_linear_mapping = vmi_get_function(VMI_CALL_SetLinearMapping); + vmi_ops.allocate_page = vmi_get_function(VMI_CALL_AllocatePage); + vmi_ops.release_page = vmi_get_function(VMI_CALL_ReleasePage); + + paravirt_ops.alloc_pt = vmi_allocate_pt; + paravirt_ops.alloc_pd = vmi_allocate_pd; + paravirt_ops.alloc_pd_clone = vmi_allocate_pd_clone; + paravirt_ops.release_pt = vmi_release_pt; + paravirt_ops.release_pd = vmi_release_pd; + paravirt_ops.set_pte = vmi_set_pte; + paravirt_ops.set_pte_at = vmi_set_pte_at; + paravirt_ops.set_pmd = vmi_set_pmd; + paravirt_ops.pte_update = vmi_update_pte; + paravirt_ops.pte_update_defer = vmi_update_pte_defer; +#ifdef CONFIG_X86_PAE + paravirt_ops.set_pte_atomic = vmi_set_pte_atomic; + paravirt_ops.set_pte_present = vmi_set_pte_present; + paravirt_ops.set_pud = vmi_set_pud; + paravirt_ops.pte_clear = vmi_pte_clear; + paravirt_ops.pmd_clear = vmi_pmd_clear; +#endif + /* + * These MUST always be patched. Don't support indirect jumps + * through these operations, as the VMI interface may use either + * a jump or a call to get to these operations, depending on + * the backend. They are performance critical anyway, so requiring + * a patch is not a big problem. + */ + paravirt_ops.irq_enable_sysexit = (void *)0xfeedbab0; + paravirt_ops.iret = (void *)0xbadbab0; + +#ifdef CONFIG_SMP + paravirt_ops.startup_ipi_hook = vmi_startup_ipi_hook; + vmi_ops.set_initial_ap_state = vmi_get_function(VMI_CALL_SetInitialAPState); +#endif + +#ifdef CONFIG_X86_LOCAL_APIC + paravirt_ops.apic_read = vmi_get_function(VMI_CALL_APICRead); + paravirt_ops.apic_write = vmi_get_function(VMI_CALL_APICWrite); + paravirt_ops.apic_write_atomic = vmi_get_function(VMI_CALL_APICWrite); +#endif + + /* + * Alternative instruction rewriting doesn't happen soon enough + * to convert VMI_IRET to a call instead of a jump; so we have + * to do this before IRQs get reenabled. Fortunately, it is + * idempotent. + */ + apply_paravirt(__start_parainstructions, __stop_parainstructions); + + vmi_bringup(); + + return 1; +} + +#undef para_fill + +void __init vmi_init(void) +{ + unsigned long flags; + + if (!vmi_rom) + probe_vmi_rom(); + else + check_vmi_rom(vmi_rom); + + /* In case probing for or validating the ROM failed, basil */ + if (!vmi_rom) + return; + + reserve_top_address(-vmi_rom->virtual_top); + + local_irq_save(flags); + activate_vmi(); +#ifdef CONFIG_SMP + no_timer_check = 1; +#endif + local_irq_restore(flags & X86_EFLAGS_IF); +} + +static int __init parse_vmi(char *arg) +{ + if (!arg) + return -EINVAL; + + if (!strcmp(arg, "disable_nodelay")) + disable_nodelay = 1; + else if (!strcmp(arg, "disable_pge")) { + clear_bit(X86_FEATURE_PGE, boot_cpu_data.x86_capability); + disable_pge = 1; + } else if (!strcmp(arg, "disable_pse")) { + clear_bit(X86_FEATURE_PSE, boot_cpu_data.x86_capability); + disable_pse = 1; + } else if (!strcmp(arg, "disable_sep")) { + clear_bit(X86_FEATURE_SEP, boot_cpu_data.x86_capability); + disable_sep = 1; + } else if (!strcmp(arg, "disable_tsc")) { + clear_bit(X86_FEATURE_TSC, boot_cpu_data.x86_capability); + disable_tsc = 1; + } else if (!strcmp(arg, "disable_mtrr")) { + clear_bit(X86_FEATURE_MTRR, boot_cpu_data.x86_capability); + disable_mtrr = 1; + } + return 0; +} + +early_param("vmi", parse_vmi); diff --git a/arch/i386/mm/pgtable.c b/arch/i386/mm/pgtable.c index b5f538f..fa0cfbd 100644 --- a/arch/i386/mm/pgtable.c +++ b/arch/i386/mm/pgtable.c @@ -171,6 +171,8 @@ void __set_fixmap (enum fixed_addresses idx, unsigned long phys, pgprot_t flags) void reserve_top_address(unsigned long reserve) { BUG_ON(fixmaps > 0); + printk(KERN_INFO "Reserving virtual address space above 0x%08x\n", + (int)-reserve); #ifdef CONFIG_COMPAT_VDSO BUG_ON(reserve != 0); #else diff --git a/include/asm-i386/timer.h b/include/asm-i386/timer.h index d0ebd05..1ee64e3 100644 --- a/include/asm-i386/timer.h +++ b/include/asm-i386/timer.h @@ -8,6 +8,7 @@ void setup_pit_timer(void); /* Modifiers for buggy PIT handling */ extern int pit_latch_buggy; extern int timer_ack; +extern int no_timer_check; extern int recalibrate_cpu_khz(void); #endif diff --git a/include/asm-i386/vmi.h b/include/asm-i386/vmi.h new file mode 100644 index 0000000..43c8933 --- /dev/null +++ b/include/asm-i386/vmi.h @@ -0,0 +1,262 @@ +/* + * VMI interface definition + * + * Copyright (C) 2005, VMware, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Maintained by: Zachary Amsden zach@vmware.com + * + */ +#include + +/* + *--------------------------------------------------------------------- + * + * VMI Option ROM API + * + *--------------------------------------------------------------------- + */ +#define VMI_SIGNATURE 0x696d5663 /* "cVmi" */ + +#define PCI_VENDOR_ID_VMWARE 0x15AD +#define PCI_DEVICE_ID_VMWARE_VMI 0x0801 + +/* + * We use two version numbers for compatibility, with the major + * number signifying interface breakages, and the minor number + * interface extensions. + */ +#define VMI_API_REV_MAJOR 3 +#define VMI_API_REV_MINOR 0 + +#define VMI_CALL_CPUID 0 +#define VMI_CALL_WRMSR 1 +#define VMI_CALL_RDMSR 2 +#define VMI_CALL_SetGDT 3 +#define VMI_CALL_SetLDT 4 +#define VMI_CALL_SetIDT 5 +#define VMI_CALL_SetTR 6 +#define VMI_CALL_GetGDT 7 +#define VMI_CALL_GetLDT 8 +#define VMI_CALL_GetIDT 9 +#define VMI_CALL_GetTR 10 +#define VMI_CALL_WriteGDTEntry 11 +#define VMI_CALL_WriteLDTEntry 12 +#define VMI_CALL_WriteIDTEntry 13 +#define VMI_CALL_UpdateKernelStack 14 +#define VMI_CALL_SetCR0 15 +#define VMI_CALL_SetCR2 16 +#define VMI_CALL_SetCR3 17 +#define VMI_CALL_SetCR4 18 +#define VMI_CALL_GetCR0 19 +#define VMI_CALL_GetCR2 20 +#define VMI_CALL_GetCR3 21 +#define VMI_CALL_GetCR4 22 +#define VMI_CALL_WBINVD 23 +#define VMI_CALL_SetDR 24 +#define VMI_CALL_GetDR 25 +#define VMI_CALL_RDPMC 26 +#define VMI_CALL_RDTSC 27 +#define VMI_CALL_CLTS 28 +#define VMI_CALL_EnableInterrupts 29 +#define VMI_CALL_DisableInterrupts 30 +#define VMI_CALL_GetInterruptMask 31 +#define VMI_CALL_SetInterruptMask 32 +#define VMI_CALL_IRET 33 +#define VMI_CALL_SYSEXIT 34 +#define VMI_CALL_Halt 35 +#define VMI_CALL_Reboot 36 +#define VMI_CALL_Shutdown 37 +#define VMI_CALL_SetPxE 38 +#define VMI_CALL_SetPxELong 39 +#define VMI_CALL_UpdatePxE 40 +#define VMI_CALL_UpdatePxELong 41 +#define VMI_CALL_MachineToPhysical 42 +#define VMI_CALL_PhysicalToMachine 43 +#define VMI_CALL_AllocatePage 44 +#define VMI_CALL_ReleasePage 45 +#define VMI_CALL_InvalPage 46 +#define VMI_CALL_FlushTLB 47 +#define VMI_CALL_SetLinearMapping 48 + +#define VMI_CALL_SetIOPLMask 61 +#define VMI_CALL_SetInitialAPState 62 +#define VMI_CALL_APICWrite 63 +#define VMI_CALL_APICRead 64 +#define VMI_CALL_SetLazyMode 73 + +/* + *--------------------------------------------------------------------- + * + * MMU operation flags + * + *--------------------------------------------------------------------- + */ + +/* Flags used by VMI_{Allocate|Release}Page call */ +#define VMI_PAGE_PAE 0x10 /* Allocate PAE shadow */ +#define VMI_PAGE_CLONE 0x20 /* Clone from another shadow */ +#define VMI_PAGE_ZEROED 0x40 /* Page is pre-zeroed */ + + +/* Flags shared by Allocate|Release Page and PTE updates */ +#define VMI_PAGE_PT 0x01 +#define VMI_PAGE_PD 0x02 +#define VMI_PAGE_PDP 0x04 +#define VMI_PAGE_PML4 0x08 + +#define VMI_PAGE_NORMAL 0x00 /* for debugging */ + +/* Flags used by PTE updates */ +#define VMI_PAGE_CURRENT_AS 0x10 /* implies VMI_PAGE_VA_MASK is valid */ +#define VMI_PAGE_DEFER 0x20 /* may queue update until TLB inval */ +#define VMI_PAGE_VA_MASK 0xfffff000 + +#ifdef CONFIG_X86_PAE +#define VMI_PAGE_L1 (VMI_PAGE_PT | VMI_PAGE_PAE | VMI_PAGE_ZEROED) +#define VMI_PAGE_L2 (VMI_PAGE_PD | VMI_PAGE_PAE | VMI_PAGE_ZEROED) +#else +#define VMI_PAGE_L1 (VMI_PAGE_PT | VMI_PAGE_ZEROED) +#define VMI_PAGE_L2 (VMI_PAGE_PD | VMI_PAGE_ZEROED) +#endif + +/* Flags used by VMI_FlushTLB call */ +#define VMI_FLUSH_TLB 0x01 +#define VMI_FLUSH_GLOBAL 0x02 + +/* + *--------------------------------------------------------------------- + * + * VMI relocation definitions for ROM call get_reloc + * + *--------------------------------------------------------------------- + */ + +/* VMI Relocation types */ +#define VMI_RELOCATION_NONE 0 +#define VMI_RELOCATION_CALL_REL 1 +#define VMI_RELOCATION_JUMP_REL 2 +#define VMI_RELOCATION_NOP 3 + +#ifndef __ASSEMBLY__ +struct vmi_relocation_info { + unsigned char *eip; + unsigned char type; + unsigned char reserved[3]; +}; +#endif + + +/* + *--------------------------------------------------------------------- + * + * Generic ROM structures and definitions + * + *--------------------------------------------------------------------- + */ + +#ifndef __ASSEMBLY__ + +struct vrom_header { + u16 rom_signature; // option ROM signature + u8 rom_length; // ROM length in 512 byte chunks + u8 rom_entry[4]; // 16-bit code entry point + u8 rom_pad0; // 4-byte align pad + u32 vrom_signature; // VROM identification signature + u8 api_version_min;// Minor version of API + u8 api_version_maj;// Major version of API + u8 jump_slots; // Number of jump slots + u8 reserved1; // Reserved for expansion + u32 virtual_top; // Hypervisor virtual address start + u16 reserved2; // Reserved for expansion + u16 license_offs; // Offset to License string + u16 pci_header_offs;// Offset to PCI OPROM header + u16 pnp_header_offs;// Offset to PnP OPROM header + u32 rom_pad3; // PnP reserverd / VMI reserved + u8 reserved[96]; // Reserved for headers + char vmi_init[8]; // VMI_Init jump point + char get_reloc[8]; // VMI_GetRelocationInfo jump point +} __attribute__((packed)); + +struct pnp_header { + char sig[4]; + char rev; + char size; + short next; + short res; + long devID; + unsigned short manufacturer_offset; + unsigned short product_offset; +} __attribute__((packed)); + +struct pci_header { + char sig[4]; + short vendorID; + short deviceID; + short vpdData; + short size; + char rev; + char class; + char subclass; + char interface; + short chunks; + char rom_version_min; + char rom_version_maj; + char codetype; + char lastRom; + short reserved; +} __attribute__((packed)); + +/* Function prototypes for bootstrapping */ +extern void vmi_init(void); +extern void vmi_bringup(void); +extern void vmi_apply_boot_page_allocations(void); + +/* State needed to start an application processor in an SMP system. */ +struct vmi_ap_state { + u32 cr0; + u32 cr2; + u32 cr3; + u32 cr4; + + u64 efer; + + u32 eip; + u32 eflags; + u32 eax; + u32 ebx; + u32 ecx; + u32 edx; + u32 esp; + u32 ebp; + u32 esi; + u32 edi; + u16 cs; + u16 ss; + u16 ds; + u16 es; + u16 fs; + u16 gs; + u16 ldtr; + + u16 gdtr_limit; + u32 gdtr_base; + u32 idtr_base; + u16 idtr_limit; +}; + +#endif -- cgit v0.10.2 From bbab4f3bb7f528d2b8ccb5de9ae5f6ff3fb29684 Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Tue, 13 Feb 2007 13:26:21 +0100 Subject: [PATCH] i386: vMI timer patches VMI timer code. It works by taking over the local APIC clock when APIC is configured, which requires a couple hooks into the APIC code. The backend timer code could be commonized into the timer infrastructure, but there are some pieces missing (stolen time, in particular), and the exact semantics of when to do accounting for NO_IDLE need to be shared between different hypervisors as well. So for now, VMI timer is a separate module. [Adrian Bunk: cleanups] Subject: VMI timer patches Signed-off-by: Zachary Amsden Signed-off-by: Andi Kleen Cc: Andi Kleen Cc: Jeremy Fitzhardinge Cc: Rusty Russell Cc: Chris Wright Signed-off-by: Andrew Morton diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index a3b3f6e..595fb77 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -1272,3 +1272,12 @@ config X86_TRAMPOLINE config KTIME_SCALAR bool default y + +config NO_IDLE_HZ + bool + depends on PARAVIRT + default y + help + Switches the regular HZ timer off when the system is going idle. + This helps a hypervisor detect that the Linux system is idle, + reducing the overhead of idle systems. diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index 9cfb589..97f1e96 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -40,7 +40,7 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_HPET_TIMER) += hpet.o obj-$(CONFIG_K8_NB) += k8.o -obj-$(CONFIG_VMI) += vmi.o +obj-$(CONFIG_VMI) += vmi.o vmitime.o # Make sure this is linked after any other paravirt_ops structs: see head.S obj-$(CONFIG_PARAVIRT) += paravirt.o diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c index 776d9be..629c5ed 100644 --- a/arch/i386/kernel/apic.c +++ b/arch/i386/kernel/apic.c @@ -1395,7 +1395,7 @@ int __init APIC_init_uniprocessor (void) if (!skip_ioapic_setup && nr_ioapics) setup_IO_APIC(); #endif - setup_boot_APIC_clock(); + setup_boot_clock(); return 0; } diff --git a/arch/i386/kernel/entry.S b/arch/i386/kernel/entry.S index 8c6a22a..d4b4ffc 100644 --- a/arch/i386/kernel/entry.S +++ b/arch/i386/kernel/entry.S @@ -626,6 +626,11 @@ ENTRY(name) \ /* The include is where all of the SMP etc. interrupts come from */ #include "entry_arch.h" +/* This alternate entry is needed because we hijack the apic LVTT */ +#if defined(CONFIG_VMI) && defined(CONFIG_X86_LOCAL_APIC) +BUILD_INTERRUPT(apic_vmi_timer_interrupt,LOCAL_TIMER_VECTOR) +#endif + KPROBE_ENTRY(page_fault) RING0_EC_FRAME pushl $do_page_fault diff --git a/arch/i386/kernel/paravirt.c b/arch/i386/kernel/paravirt.c index 5bf8105..2003733 100644 --- a/arch/i386/kernel/paravirt.c +++ b/arch/i386/kernel/paravirt.c @@ -544,6 +544,8 @@ struct paravirt_ops paravirt_ops = { .apic_write = native_apic_write, .apic_write_atomic = native_apic_write_atomic, .apic_read = native_apic_read, + .setup_boot_clock = setup_boot_APIC_clock, + .setup_secondary_clock = setup_secondary_APIC_clock, #endif .set_lazy_mode = (void *)native_nop, diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index 42502d8..5a00b07 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -554,7 +554,7 @@ static void __cpuinit start_secondary(void *unused) smp_callin(); while (!cpu_isset(smp_processor_id(), smp_commenced_mask)) rep_nop(); - setup_secondary_APIC_clock(); + setup_secondary_clock(); if (nmi_watchdog == NMI_IO_APIC) { disable_8259A_irq(0); enable_NMI_through_LVT0(NULL); @@ -1331,7 +1331,7 @@ static void __init smp_boot_cpus(unsigned int max_cpus) smpboot_setup_io_apic(); - setup_boot_APIC_clock(); + setup_boot_clock(); /* * Synchronize the TSC with the AP diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c index c505b16..9603cca 100644 --- a/arch/i386/kernel/time.c +++ b/arch/i386/kernel/time.c @@ -232,6 +232,7 @@ EXPORT_SYMBOL(get_cmos_time); static void sync_cmos_clock(unsigned long dummy); static DEFINE_TIMER(sync_cmos_timer, sync_cmos_clock, 0, 0); +int no_sync_cmos_clock; static void sync_cmos_clock(unsigned long dummy) { @@ -275,7 +276,8 @@ static void sync_cmos_clock(unsigned long dummy) void notify_arch_cmos_timer(void) { - mod_timer(&sync_cmos_timer, jiffies + 1); + if (!no_sync_cmos_clock) + mod_timer(&sync_cmos_timer, jiffies + 1); } static long clock_cmos_diff; diff --git a/arch/i386/kernel/tsc.c b/arch/i386/kernel/tsc.c index 2cfc7b0..12fef14 100644 --- a/arch/i386/kernel/tsc.c +++ b/arch/i386/kernel/tsc.c @@ -23,6 +23,7 @@ * an extra value to store the TSC freq */ unsigned int tsc_khz; +unsigned long long (*custom_sched_clock)(void); int tsc_disable; @@ -107,6 +108,9 @@ unsigned long long sched_clock(void) { unsigned long long this_offset; + if (unlikely(custom_sched_clock)) + return (*custom_sched_clock)(); + /* * in the NUMA case we dont use the TSC as they are not * synchronized across all CPUs. diff --git a/arch/i386/kernel/vmi.c b/arch/i386/kernel/vmi.c index a94d64b..bb5a7ab 100644 --- a/arch/i386/kernel/vmi.c +++ b/arch/i386/kernel/vmi.c @@ -34,6 +34,7 @@ #include #include #include +#include /* Convenient for calling VMI functions indirectly in the ROM */ typedef u32 __attribute__((regparm(1))) (VROMFUNC)(void); @@ -67,6 +68,7 @@ struct { void (*set_linear_mapping)(int, u32, u32, u32); void (*flush_tlb)(int); void (*set_initial_ap_state)(int, int); + void (*halt)(void); } vmi_ops; /* XXX move this to alternative.h */ @@ -252,6 +254,19 @@ static void vmi_nop(void) { } +/* For NO_IDLE_HZ, we stop the clock when halting the kernel */ +#ifdef CONFIG_NO_IDLE_HZ +static fastcall void vmi_safe_halt(void) +{ + int idle = vmi_stop_hz_timer(); + vmi_ops.halt(); + if (idle) { + local_irq_disable(); + vmi_account_time_restart_hz_timer(); + local_irq_enable(); + } +} +#endif #ifdef CONFIG_DEBUG_PAGE_TYPE @@ -727,7 +742,12 @@ static inline int __init activate_vmi(void) (char *)paravirt_ops.save_fl); patch_offset(&irq_save_disable_callout[IRQ_PATCH_DISABLE], (char *)paravirt_ops.irq_disable); +#ifndef CONFIG_NO_IDLE_HZ para_fill(safe_halt, Halt); +#else + vmi_ops.halt = vmi_get_function(VMI_CALL_Halt); + paravirt_ops.safe_halt = vmi_safe_halt; +#endif para_fill(wbinvd, WBINVD); /* paravirt_ops.read_msr = vmi_rdmsr */ /* paravirt_ops.write_msr = vmi_wrmsr */ @@ -838,6 +858,31 @@ static inline int __init activate_vmi(void) #endif /* + * Check for VMI timer functionality by probing for a cycle frequency method + */ + reloc = call_vrom_long_func(vmi_rom, get_reloc, VMI_CALL_GetCycleFrequency); + if (rel->type != VMI_RELOCATION_NONE) { + vmi_timer_ops.get_cycle_frequency = (void *)rel->eip; + vmi_timer_ops.get_cycle_counter = + vmi_get_function(VMI_CALL_GetCycleCounter); + vmi_timer_ops.get_wallclock = + vmi_get_function(VMI_CALL_GetWallclockTime); + vmi_timer_ops.wallclock_updated = + vmi_get_function(VMI_CALL_WallclockUpdated); + vmi_timer_ops.set_alarm = vmi_get_function(VMI_CALL_SetAlarm); + vmi_timer_ops.cancel_alarm = + vmi_get_function(VMI_CALL_CancelAlarm); + paravirt_ops.time_init = vmi_time_init; + paravirt_ops.get_wallclock = vmi_get_wallclock; + paravirt_ops.set_wallclock = vmi_set_wallclock; +#ifdef CONFIG_X86_LOCAL_APIC + paravirt_ops.setup_boot_clock = vmi_timer_setup_boot_alarm; + paravirt_ops.setup_secondary_clock = vmi_timer_setup_secondary_alarm; +#endif + custom_sched_clock = vmi_sched_clock; + } + + /* * Alternative instruction rewriting doesn't happen soon enough * to convert VMI_IRET to a call instead of a jump; so we have * to do this before IRQs get reenabled. Fortunately, it is diff --git a/arch/i386/kernel/vmitime.c b/arch/i386/kernel/vmitime.c new file mode 100644 index 0000000..7c3033d --- /dev/null +++ b/arch/i386/kernel/vmitime.c @@ -0,0 +1,495 @@ +/* + * VMI paravirtual timer support routines. + * + * Copyright (C) 2005, VMware, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to dhecht@vmware.com + * + */ + +/* + * Portions of this code from arch/i386/kernel/timers/timer_tsc.c. + * Portions of the CONFIG_NO_IDLE_HZ code from arch/s390/kernel/time.c. + * See comments there for proper credits. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#ifdef CONFIG_X86_LOCAL_APIC +#define VMI_ALARM_WIRING VMI_ALARM_WIRED_LVTT +#else +#define VMI_ALARM_WIRING VMI_ALARM_WIRED_IRQ0 +#endif + +/* Cached VMI operations */ +struct vmi_timer_ops vmi_timer_ops; + +#ifdef CONFIG_NO_IDLE_HZ + +/* /proc/sys/kernel/hz_timer state. */ +int sysctl_hz_timer; + +/* Some stats */ +static DEFINE_PER_CPU(unsigned long, vmi_idle_no_hz_irqs); +static DEFINE_PER_CPU(unsigned long, vmi_idle_no_hz_jiffies); +static DEFINE_PER_CPU(unsigned long, idle_start_jiffies); + +#endif /* CONFIG_NO_IDLE_HZ */ + +/* Number of alarms per second. By default this is CONFIG_VMI_ALARM_HZ. */ +static int alarm_hz = CONFIG_VMI_ALARM_HZ; + +/* Cache of the value get_cycle_frequency / HZ. */ +static signed long long cycles_per_jiffy; + +/* Cache of the value get_cycle_frequency / alarm_hz. */ +static signed long long cycles_per_alarm; + +/* The number of cycles accounted for by the 'jiffies'/'xtime' count. + * Protected by xtime_lock. */ +static unsigned long long real_cycles_accounted_system; + +/* The number of cycles accounted for by update_process_times(), per cpu. */ +static DEFINE_PER_CPU(unsigned long long, process_times_cycles_accounted_cpu); + +/* The number of stolen cycles accounted, per cpu. */ +static DEFINE_PER_CPU(unsigned long long, stolen_cycles_accounted_cpu); + +/* Clock source. */ +static cycle_t read_real_cycles(void) +{ + return vmi_timer_ops.get_cycle_counter(VMI_CYCLES_REAL); +} + +static cycle_t read_available_cycles(void) +{ + return vmi_timer_ops.get_cycle_counter(VMI_CYCLES_AVAILABLE); +} + +#if 0 +static cycle_t read_stolen_cycles(void) +{ + return vmi_timer_ops.get_cycle_counter(VMI_CYCLES_STOLEN); +} +#endif /* 0 */ + +static struct clocksource clocksource_vmi = { + .name = "vmi-timer", + .rating = 450, + .read = read_real_cycles, + .mask = CLOCKSOURCE_MASK(64), + .mult = 0, /* to be set */ + .shift = 22, + .is_continuous = 1, +}; + + +/* Timer interrupt handler. */ +static irqreturn_t vmi_timer_interrupt(int irq, void *dev_id); + +static struct irqaction vmi_timer_irq = { + vmi_timer_interrupt, + SA_INTERRUPT, + CPU_MASK_NONE, + "VMI-alarm", + NULL, + NULL +}; + +/* Alarm rate */ +static int __init vmi_timer_alarm_rate_setup(char* str) +{ + int alarm_rate; + if (get_option(&str, &alarm_rate) == 1 && alarm_rate > 0) { + alarm_hz = alarm_rate; + printk(KERN_WARNING "VMI timer alarm HZ set to %d\n", alarm_hz); + } + return 1; +} +__setup("vmi_timer_alarm_hz=", vmi_timer_alarm_rate_setup); + + +/* Initialization */ +static void vmi_get_wallclock_ts(struct timespec *ts) +{ + unsigned long long wallclock; + wallclock = vmi_timer_ops.get_wallclock(); // nsec units + ts->tv_nsec = do_div(wallclock, 1000000000); + ts->tv_sec = wallclock; +} + +static void update_xtime_from_wallclock(void) +{ + struct timespec ts; + vmi_get_wallclock_ts(&ts); + do_settimeofday(&ts); +} + +unsigned long vmi_get_wallclock(void) +{ + struct timespec ts; + vmi_get_wallclock_ts(&ts); + return ts.tv_sec; +} + +int vmi_set_wallclock(unsigned long now) +{ + return -1; +} + +unsigned long long vmi_sched_clock(void) +{ + return read_available_cycles(); +} + +void __init vmi_time_init(void) +{ + unsigned long long cycles_per_sec, cycles_per_msec; + + setup_irq(0, &vmi_timer_irq); +#ifdef CONFIG_X86_LOCAL_APIC + set_intr_gate(LOCAL_TIMER_VECTOR, apic_vmi_timer_interrupt); +#endif + + no_sync_cmos_clock = 1; + + vmi_get_wallclock_ts(&xtime); + set_normalized_timespec(&wall_to_monotonic, + -xtime.tv_sec, -xtime.tv_nsec); + + real_cycles_accounted_system = read_real_cycles(); + update_xtime_from_wallclock(); + per_cpu(process_times_cycles_accounted_cpu, 0) = read_available_cycles(); + + cycles_per_sec = vmi_timer_ops.get_cycle_frequency(); + + cycles_per_jiffy = cycles_per_sec; + (void)do_div(cycles_per_jiffy, HZ); + cycles_per_alarm = cycles_per_sec; + (void)do_div(cycles_per_alarm, alarm_hz); + cycles_per_msec = cycles_per_sec; + (void)do_div(cycles_per_msec, 1000); + cpu_khz = cycles_per_msec; + + printk(KERN_WARNING "VMI timer cycles/sec = %llu ; cycles/jiffy = %llu ;" + "cycles/alarm = %llu\n", cycles_per_sec, cycles_per_jiffy, + cycles_per_alarm); + + clocksource_vmi.mult = clocksource_khz2mult(cycles_per_msec, + clocksource_vmi.shift); + if (clocksource_register(&clocksource_vmi)) + printk(KERN_WARNING "Error registering VMITIME clocksource."); + + /* Disable PIT. */ + outb_p(0x3a, PIT_MODE); /* binary, mode 5, LSB/MSB, ch 0 */ + + /* schedule the alarm. do this in phase with process_times_cycles_accounted_cpu + * reduce the latency calling update_process_times. */ + vmi_timer_ops.set_alarm( + VMI_ALARM_WIRED_IRQ0 | VMI_ALARM_IS_PERIODIC | VMI_CYCLES_AVAILABLE, + per_cpu(process_times_cycles_accounted_cpu, 0) + cycles_per_alarm, + cycles_per_alarm); +} + +#ifdef CONFIG_X86_LOCAL_APIC + +void __init vmi_timer_setup_boot_alarm(void) +{ + local_irq_disable(); + + /* Route the interrupt to the correct vector. */ + apic_write_around(APIC_LVTT, LOCAL_TIMER_VECTOR); + + /* Cancel the IRQ0 wired alarm, and setup the LVTT alarm. */ + vmi_timer_ops.cancel_alarm(VMI_CYCLES_AVAILABLE); + vmi_timer_ops.set_alarm( + VMI_ALARM_WIRED_LVTT | VMI_ALARM_IS_PERIODIC | VMI_CYCLES_AVAILABLE, + per_cpu(process_times_cycles_accounted_cpu, 0) + cycles_per_alarm, + cycles_per_alarm); + local_irq_enable(); +} + +/* Initialize the time accounting variables for an AP on an SMP system. + * Also, set the local alarm for the AP. */ +void __init vmi_timer_setup_secondary_alarm(void) +{ + int cpu = smp_processor_id(); + + /* Route the interrupt to the correct vector. */ + apic_write_around(APIC_LVTT, LOCAL_TIMER_VECTOR); + + per_cpu(process_times_cycles_accounted_cpu, cpu) = read_available_cycles(); + + vmi_timer_ops.set_alarm( + VMI_ALARM_WIRED_LVTT | VMI_ALARM_IS_PERIODIC | VMI_CYCLES_AVAILABLE, + per_cpu(process_times_cycles_accounted_cpu, cpu) + cycles_per_alarm, + cycles_per_alarm); +} + +#endif + +/* Update system wide (real) time accounting (e.g. jiffies, xtime). */ +static void vmi_account_real_cycles(unsigned long long cur_real_cycles) +{ + long long cycles_not_accounted; + + write_seqlock(&xtime_lock); + + cycles_not_accounted = cur_real_cycles - real_cycles_accounted_system; + while (cycles_not_accounted >= cycles_per_jiffy) { + /* systems wide jiffies and wallclock. */ + do_timer(1); + + cycles_not_accounted -= cycles_per_jiffy; + real_cycles_accounted_system += cycles_per_jiffy; + } + + if (vmi_timer_ops.wallclock_updated()) + update_xtime_from_wallclock(); + + write_sequnlock(&xtime_lock); +} + +/* Update per-cpu process times. */ +static void vmi_account_process_times_cycles(struct pt_regs *regs, int cpu, + unsigned long long cur_process_times_cycles) +{ + long long cycles_not_accounted; + cycles_not_accounted = cur_process_times_cycles - + per_cpu(process_times_cycles_accounted_cpu, cpu); + + while (cycles_not_accounted >= cycles_per_jiffy) { + /* Account time to the current process. This includes + * calling into the scheduler to decrement the timeslice + * and possibly reschedule.*/ + update_process_times(user_mode(regs)); + /* XXX handle /proc/profile multiplier. */ + profile_tick(CPU_PROFILING); + + cycles_not_accounted -= cycles_per_jiffy; + per_cpu(process_times_cycles_accounted_cpu, cpu) += cycles_per_jiffy; + } +} + +#ifdef CONFIG_NO_IDLE_HZ +/* Update per-cpu idle times. Used when a no-hz halt is ended. */ +static void vmi_account_no_hz_idle_cycles(int cpu, + unsigned long long cur_process_times_cycles) +{ + long long cycles_not_accounted; + unsigned long no_idle_hz_jiffies = 0; + + cycles_not_accounted = cur_process_times_cycles - + per_cpu(process_times_cycles_accounted_cpu, cpu); + + while (cycles_not_accounted >= cycles_per_jiffy) { + no_idle_hz_jiffies++; + cycles_not_accounted -= cycles_per_jiffy; + per_cpu(process_times_cycles_accounted_cpu, cpu) += cycles_per_jiffy; + } + /* Account time to the idle process. */ + account_steal_time(idle_task(cpu), jiffies_to_cputime(no_idle_hz_jiffies)); +} +#endif + +/* Update per-cpu stolen time. */ +static void vmi_account_stolen_cycles(int cpu, + unsigned long long cur_real_cycles, + unsigned long long cur_avail_cycles) +{ + long long stolen_cycles_not_accounted; + unsigned long stolen_jiffies = 0; + + if (cur_real_cycles < cur_avail_cycles) + return; + + stolen_cycles_not_accounted = cur_real_cycles - cur_avail_cycles - + per_cpu(stolen_cycles_accounted_cpu, cpu); + + while (stolen_cycles_not_accounted >= cycles_per_jiffy) { + stolen_jiffies++; + stolen_cycles_not_accounted -= cycles_per_jiffy; + per_cpu(stolen_cycles_accounted_cpu, cpu) += cycles_per_jiffy; + } + /* HACK: pass NULL to force time onto cpustat->steal. */ + account_steal_time(NULL, jiffies_to_cputime(stolen_jiffies)); +} + +/* Body of either IRQ0 interrupt handler (UP no local-APIC) or + * local-APIC LVTT interrupt handler (UP & local-APIC or SMP). */ +static void vmi_local_timer_interrupt(int cpu) +{ + unsigned long long cur_real_cycles, cur_process_times_cycles; + + cur_real_cycles = read_real_cycles(); + cur_process_times_cycles = read_available_cycles(); + /* Update system wide (real) time state (xtime, jiffies). */ + vmi_account_real_cycles(cur_real_cycles); + /* Update per-cpu process times. */ + vmi_account_process_times_cycles(get_irq_regs(), cpu, cur_process_times_cycles); + /* Update time stolen from this cpu by the hypervisor. */ + vmi_account_stolen_cycles(cpu, cur_real_cycles, cur_process_times_cycles); +} + +#ifdef CONFIG_NO_IDLE_HZ + +/* Must be called only from idle loop, with interrupts disabled. */ +int vmi_stop_hz_timer(void) +{ + /* Note that cpu_set, cpu_clear are (SMP safe) atomic on x86. */ + + unsigned long seq, next; + unsigned long long real_cycles_expiry; + int cpu = smp_processor_id(); + int idle; + + BUG_ON(!irqs_disabled()); + if (sysctl_hz_timer != 0) + return 0; + + cpu_set(cpu, nohz_cpu_mask); + smp_mb(); + if (rcu_needs_cpu(cpu) || local_softirq_pending() || + (next = next_timer_interrupt(), time_before_eq(next, jiffies))) { + cpu_clear(cpu, nohz_cpu_mask); + next = jiffies; + idle = 0; + } else + idle = 1; + + /* Convert jiffies to the real cycle counter. */ + do { + seq = read_seqbegin(&xtime_lock); + real_cycles_expiry = real_cycles_accounted_system + + (long)(next - jiffies) * cycles_per_jiffy; + } while (read_seqretry(&xtime_lock, seq)); + + /* This cpu is going idle. Disable the periodic alarm. */ + if (idle) { + vmi_timer_ops.cancel_alarm(VMI_CYCLES_AVAILABLE); + per_cpu(idle_start_jiffies, cpu) = jiffies; + } + + /* Set the real time alarm to expire at the next event. */ + vmi_timer_ops.set_alarm( + VMI_ALARM_WIRING | VMI_ALARM_IS_ONESHOT | VMI_CYCLES_REAL, + real_cycles_expiry, 0); + + return idle; +} + +static void vmi_reenable_hz_timer(int cpu) +{ + /* For /proc/vmi/info idle_hz stat. */ + per_cpu(vmi_idle_no_hz_jiffies, cpu) += jiffies - per_cpu(idle_start_jiffies, cpu); + per_cpu(vmi_idle_no_hz_irqs, cpu)++; + + /* Don't bother explicitly cancelling the one-shot alarm -- at + * worse we will receive a spurious timer interrupt. */ + vmi_timer_ops.set_alarm( + VMI_ALARM_WIRING | VMI_ALARM_IS_PERIODIC | VMI_CYCLES_AVAILABLE, + per_cpu(process_times_cycles_accounted_cpu, cpu) + cycles_per_alarm, + cycles_per_alarm); + /* Indicate this cpu is no longer nohz idle. */ + cpu_clear(cpu, nohz_cpu_mask); +} + +/* Called from interrupt handlers when (local) HZ timer is disabled. */ +void vmi_account_time_restart_hz_timer(void) +{ + unsigned long long cur_real_cycles, cur_process_times_cycles; + int cpu = smp_processor_id(); + + BUG_ON(!irqs_disabled()); + /* Account the time during which the HZ timer was disabled. */ + cur_real_cycles = read_real_cycles(); + cur_process_times_cycles = read_available_cycles(); + /* Update system wide (real) time state (xtime, jiffies). */ + vmi_account_real_cycles(cur_real_cycles); + /* Update per-cpu idle times. */ + vmi_account_no_hz_idle_cycles(cpu, cur_process_times_cycles); + /* Update time stolen from this cpu by the hypervisor. */ + vmi_account_stolen_cycles(cpu, cur_real_cycles, cur_process_times_cycles); + /* Reenable the hz timer. */ + vmi_reenable_hz_timer(cpu); +} + +#endif /* CONFIG_NO_IDLE_HZ */ + +/* UP (and no local-APIC) VMI-timer alarm interrupt handler. + * Handler for IRQ0. Not used when SMP or X86_LOCAL_APIC after + * APIC setup and setup_boot_vmi_alarm() is called. */ +static irqreturn_t vmi_timer_interrupt(int irq, void *dev_id) +{ + vmi_local_timer_interrupt(smp_processor_id()); + return IRQ_HANDLED; +} + +#ifdef CONFIG_X86_LOCAL_APIC + +/* SMP VMI-timer alarm interrupt handler. Handler for LVTT vector. + * Also used in UP when CONFIG_X86_LOCAL_APIC. + * The wrapper code is from arch/i386/kernel/apic.c#smp_apic_timer_interrupt. */ +void smp_apic_vmi_timer_interrupt(struct pt_regs *regs) +{ + struct pt_regs *old_regs = set_irq_regs(regs); + int cpu = smp_processor_id(); + + /* + * the NMI deadlock-detector uses this. + */ + per_cpu(irq_stat,cpu).apic_timer_irqs++; + + /* + * NOTE! We'd better ACK the irq immediately, + * because timer handling can be slow. + */ + ack_APIC_irq(); + + /* + * update_process_times() expects us to have done irq_enter(). + * Besides, if we don't timer interrupts ignore the global + * interrupt lock, which is the WrongThing (tm) to do. + */ + irq_enter(); + vmi_local_timer_interrupt(cpu); + irq_exit(); + set_irq_regs(old_regs); +} + +#endif /* CONFIG_X86_LOCAL_APIC */ diff --git a/include/asm-i386/apic.h b/include/asm-i386/apic.h index 41a4431..3a61206 100644 --- a/include/asm-i386/apic.h +++ b/include/asm-i386/apic.h @@ -43,6 +43,8 @@ extern void generic_apic_probe(void); #define apic_write native_apic_write #define apic_write_atomic native_apic_write_atomic #define apic_read native_apic_read +#define setup_boot_clock setup_boot_APIC_clock +#define setup_secondary_clock setup_secondary_APIC_clock #endif static __inline fastcall void native_apic_write(unsigned long reg, diff --git a/include/asm-i386/paravirt.h b/include/asm-i386/paravirt.h index 6ccf364..12ef959 100644 --- a/include/asm-i386/paravirt.h +++ b/include/asm-i386/paravirt.h @@ -121,6 +121,8 @@ struct paravirt_ops void (fastcall *apic_write)(unsigned long reg, unsigned long v); void (fastcall *apic_write_atomic)(unsigned long reg, unsigned long v); unsigned long (fastcall *apic_read)(unsigned long reg); + void (*setup_boot_clock)(void); + void (*setup_secondary_clock)(void); #endif void (fastcall *flush_tlb_user)(void); @@ -323,6 +325,16 @@ static inline unsigned long apic_read(unsigned long reg) { return paravirt_ops.apic_read(reg); } + +static inline void setup_boot_clock(void) +{ + paravirt_ops.setup_boot_clock(); +} + +static inline void setup_secondary_clock(void) +{ + paravirt_ops.setup_secondary_clock(); +} #endif #ifdef CONFIG_SMP diff --git a/include/asm-i386/time.h b/include/asm-i386/time.h index ea8065a..571b429 100644 --- a/include/asm-i386/time.h +++ b/include/asm-i386/time.h @@ -30,6 +30,7 @@ static inline int native_set_wallclock(unsigned long nowtime) #ifdef CONFIG_PARAVIRT #include +extern unsigned long long native_sched_clock(void); #else /* !CONFIG_PARAVIRT */ #define get_wallclock() native_get_wallclock() diff --git a/include/asm-i386/timer.h b/include/asm-i386/timer.h index 1ee64e3..4752c3a 100644 --- a/include/asm-i386/timer.h +++ b/include/asm-i386/timer.h @@ -9,6 +9,8 @@ void setup_pit_timer(void); extern int pit_latch_buggy; extern int timer_ack; extern int no_timer_check; +extern unsigned long long (*custom_sched_clock)(void); +extern int no_sync_cmos_clock; extern int recalibrate_cpu_khz(void); #endif diff --git a/include/asm-i386/vmi_time.h b/include/asm-i386/vmi_time.h new file mode 100644 index 0000000..c129312 --- /dev/null +++ b/include/asm-i386/vmi_time.h @@ -0,0 +1,103 @@ +/* + * VMI Time wrappers + * + * Copyright (C) 2006, VMware, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to dhecht@vmware.com + * + */ + +#ifndef __VMI_TIME_H +#define __VMI_TIME_H + +/* + * Raw VMI call indices for timer functions + */ +#define VMI_CALL_GetCycleFrequency 66 +#define VMI_CALL_GetCycleCounter 67 +#define VMI_CALL_SetAlarm 68 +#define VMI_CALL_CancelAlarm 69 +#define VMI_CALL_GetWallclockTime 70 +#define VMI_CALL_WallclockUpdated 71 + +/* Cached VMI timer operations */ +extern struct vmi_timer_ops { + u64 (*get_cycle_frequency)(void); + u64 (*get_cycle_counter)(int); + u64 (*get_wallclock)(void); + int (*wallclock_updated)(void); + void (*set_alarm)(u32 flags, u64 expiry, u64 period); + void (*cancel_alarm)(u32 flags); +} vmi_timer_ops; + +/* Prototypes */ +extern void __init vmi_time_init(void); +extern unsigned long vmi_get_wallclock(void); +extern int vmi_set_wallclock(unsigned long now); +extern unsigned long long vmi_sched_clock(void); + +#ifdef CONFIG_X86_LOCAL_APIC +extern void __init vmi_timer_setup_boot_alarm(void); +extern void __init vmi_timer_setup_secondary_alarm(void); +extern void apic_vmi_timer_interrupt(void); +#endif + +#ifdef CONFIG_NO_IDLE_HZ +extern int vmi_stop_hz_timer(void); +extern void vmi_account_time_restart_hz_timer(void); +#endif + +/* + * When run under a hypervisor, a vcpu is always in one of three states: + * running, halted, or ready. The vcpu is in the 'running' state if it + * is executing. When the vcpu executes the halt interface, the vcpu + * enters the 'halted' state and remains halted until there is some work + * pending for the vcpu (e.g. an alarm expires, host I/O completes on + * behalf of virtual I/O). At this point, the vcpu enters the 'ready' + * state (waiting for the hypervisor to reschedule it). Finally, at any + * time when the vcpu is not in the 'running' state nor the 'halted' + * state, it is in the 'ready' state. + * + * Real time is advances while the vcpu is 'running', 'ready', or + * 'halted'. Stolen time is the time in which the vcpu is in the + * 'ready' state. Available time is the remaining time -- the vcpu is + * either 'running' or 'halted'. + * + * All three views of time are accessible through the VMI cycle + * counters. + */ + +/* The cycle counters. */ +#define VMI_CYCLES_REAL 0 +#define VMI_CYCLES_AVAILABLE 1 +#define VMI_CYCLES_STOLEN 2 + +/* The alarm interface 'flags' bits */ +#define VMI_ALARM_COUNTERS 2 + +#define VMI_ALARM_COUNTER_MASK 0x000000ff + +#define VMI_ALARM_WIRED_IRQ0 0x00000000 +#define VMI_ALARM_WIRED_LVTT 0x00010000 + +#define VMI_ALARM_IS_ONESHOT 0x00000000 +#define VMI_ALARM_IS_PERIODIC 0x00000100 + +#define CONFIG_VMI_ALARM_HZ 100 + +#endif -- cgit v0.10.2 From 7b3552024380f306a6c50d5105d18d9d4258fa4e Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Tue, 13 Feb 2007 13:26:21 +0100 Subject: [PATCH] i386: Profile pc badness Profile_pc was broken when using paravirtualization because the assumption the kernel was running at CPL 0 was violated, causing bad logic to read a random value off the stack. The only way to be in kernel lock functions is to be in kernel code, so validate that assumption explicitly by checking the CS value. We don't want to be fooled by BIOS / APM segments and try to read those stacks, so only match KERNEL_CS. I moved some stuff in segment.h to make it prettier. Signed-off-by: Zachary Amsden Signed-off-by: Andi Kleen diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c index 9603cca..a4f67a6 100644 --- a/arch/i386/kernel/time.c +++ b/arch/i386/kernel/time.c @@ -131,15 +131,13 @@ unsigned long profile_pc(struct pt_regs *regs) unsigned long pc = instruction_pointer(regs); #ifdef CONFIG_SMP - if (!user_mode_vm(regs) && in_lock_functions(pc)) { + if (!v8086_mode(regs) && SEGMENT_IS_KERNEL_CODE(regs->xcs) && + in_lock_functions(pc)) { #ifdef CONFIG_FRAME_POINTER return *(unsigned long *)(regs->ebp + 4); #else - unsigned long *sp; - if ((regs->xcs & 3) == 0) - sp = (unsigned long *)®s->esp; - else - sp = (unsigned long *)regs->esp; + unsigned long *sp = (unsigned long *)®s->esp; + /* Return address is either directly at stack pointer or above a saved eflags. Eflags has bits 22-31 zero, kernel addresses don't. */ diff --git a/include/asm-i386/ptrace.h b/include/asm-i386/ptrace.h index 1646996..6002597 100644 --- a/include/asm-i386/ptrace.h +++ b/include/asm-i386/ptrace.h @@ -49,6 +49,10 @@ static inline int user_mode_vm(struct pt_regs *regs) { return ((regs->xcs & SEGMENT_RPL_MASK) | (regs->eflags & VM_MASK)) >= USER_RPL; } +static inline int v8086_mode(struct pt_regs *regs) +{ + return (regs->eflags & VM_MASK); +} #define instruction_pointer(regs) ((regs)->eip) #define regs_return_value(regs) ((regs)->eax) diff --git a/include/asm-i386/segment.h b/include/asm-i386/segment.h index 3c796af..065f10b 100644 --- a/include/asm-i386/segment.h +++ b/include/asm-i386/segment.h @@ -83,14 +83,8 @@ * The GDT has 32 entries */ #define GDT_ENTRIES 32 - #define GDT_SIZE (GDT_ENTRIES * 8) -/* Matches __KERNEL_CS and __USER_CS (they must be 2 entries apart) */ -#define SEGMENT_IS_FLAT_CODE(x) (((x) & 0xec) == GDT_ENTRY_KERNEL_CS * 8) -/* Matches PNP_CS32 and PNP_CS16 (they must be consecutive) */ -#define SEGMENT_IS_PNP_CODE(x) (((x) & 0xf4) == GDT_ENTRY_PNPBIOS_BASE * 8) - /* Simple and small GDT entries for booting only */ #define GDT_ENTRY_BOOT_CS 2 @@ -134,4 +128,17 @@ #ifndef CONFIG_PARAVIRT #define get_kernel_rpl() 0 #endif +/* + * Matching rules for certain types of segments. + */ + +/* Matches only __KERNEL_CS, ignoring PnP / USER / APM segments */ +#define SEGMENT_IS_KERNEL_CODE(x) (((x) & 0xfc) == GDT_ENTRY_KERNEL_CS * 8) + +/* Matches __KERNEL_CS and __USER_CS (they must be 2 entries apart) */ +#define SEGMENT_IS_FLAT_CODE(x) (((x) & 0xec) == GDT_ENTRY_KERNEL_CS * 8) + +/* Matches PNP_CS32 and PNP_CS16 (they must be consecutive) */ +#define SEGMENT_IS_PNP_CODE(x) (((x) & 0xf4) == GDT_ENTRY_PNPBIOS_BASE * 8) + #endif -- cgit v0.10.2 From ac3b6faff961dd52fde71fb199ec3cf68ba35052 Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Tue, 13 Feb 2007 13:26:21 +0100 Subject: [PATCH] i386: Kprobe rpl fix Kprobes bugfix for paravirt compatibility - RPL on the CS when inserting BPs must match running kernel. Signed-off-by: Zachary Amsden Signed-off-by: Andi Kleen CC: Eric Biederman diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index b85cfa3..b545bc7 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -408,7 +408,7 @@ fastcall void *__kprobes trampoline_handler(struct pt_regs *regs) spin_lock_irqsave(&kretprobe_lock, flags); head = kretprobe_inst_table_head(current); /* fixup registers */ - regs->xcs = __KERNEL_CS; + regs->xcs = __KERNEL_CS | get_kernel_rpl(); regs->eip = trampoline_address; regs->orig_eax = 0xffffffff; -- cgit v0.10.2 From 90736e20e3805dd1ffff60e4750495944956cd44 Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Tue, 13 Feb 2007 13:26:21 +0100 Subject: [PATCH] i386: Vmi timer race Because timer code moves around, and we might eventually move our init to a late_time_init hook, save and restore IRQs around this code because it is definitely not interrupt safe. Signed-off-by: Zachary Amsden Signed-off-by: Andi Kleen diff --git a/arch/i386/kernel/vmitime.c b/arch/i386/kernel/vmitime.c index 7c3033d..2e2d8db 100644 --- a/arch/i386/kernel/vmitime.c +++ b/arch/i386/kernel/vmitime.c @@ -180,7 +180,9 @@ unsigned long long vmi_sched_clock(void) void __init vmi_time_init(void) { unsigned long long cycles_per_sec, cycles_per_msec; + unsigned long flags; + local_irq_save(flags); setup_irq(0, &vmi_timer_irq); #ifdef CONFIG_X86_LOCAL_APIC set_intr_gate(LOCAL_TIMER_VECTOR, apic_vmi_timer_interrupt); @@ -224,6 +226,8 @@ void __init vmi_time_init(void) VMI_ALARM_WIRED_IRQ0 | VMI_ALARM_IS_PERIODIC | VMI_CYCLES_AVAILABLE, per_cpu(process_times_cycles_accounted_cpu, 0) + cycles_per_alarm, cycles_per_alarm); + + local_irq_restore(flags); } #ifdef CONFIG_X86_LOCAL_APIC -- cgit v0.10.2 From 7c0b49f9d1d59b3638c884b346a92dcb4ea1560a Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Tue, 13 Feb 2007 13:26:22 +0100 Subject: [PATCH] i386: Paravirt debug defaults off Deliberate register clobber around performance critical inline code is great for testing, bad to leave on by default. Many people ship with DEBUG_KERNEL turned on, so stop making DEBUG_PARAVIRT default on. Signed-off-by: Zachary Amsden Signed-off-by: Andi Kleen diff --git a/arch/i386/Kconfig.debug b/arch/i386/Kconfig.debug index f68cc6f..458bc16 100644 --- a/arch/i386/Kconfig.debug +++ b/arch/i386/Kconfig.debug @@ -87,7 +87,7 @@ config DOUBLEFAULT config DEBUG_PARAVIRT bool "Enable some paravirtualization debugging" - default y + default n depends on PARAVIRT && DEBUG_KERNEL help Currently deliberately clobbers regs which are allowed to be -- cgit v0.10.2 From f8657e1b55901e6c227094258d1fa3642fa242bd Mon Sep 17 00:00:00 2001 From: Vivek Goyal Date: Tue, 13 Feb 2007 13:26:22 +0100 Subject: [PATCH] i386: move startup_32() in text.head section o Entry startup_32 was in .text section but it was accessing some init data too and it prompts MODPOST to generate compilation warnings. WARNING: vmlinux - Section mismatch: reference to .init.data:boot_params from .text between '_text' (at offset 0xc0100029) and 'startup_32_smp' WARNING: vmlinux - Section mismatch: reference to .init.data:boot_params from .text between '_text' (at offset 0xc0100037) and 'startup_32_smp' WARNING: vmlinux - Section mismatch: reference to .init.data:init_pg_tables_end from .text between '_text' (at offset 0xc0100099) and 'startup_32_smp' o Can't move startup_32 to .init.text as this entry point has to be at the start of bzImage. Hence moved startup_32 to a new section .text.head and instructed MODPOST to not to generate warnings if init data is being accessed from .text.head section. This code has been audited. o SMP boot up code (startup_32_smp) can go into .init.text if CPU hotplug is not supported. Otherwise it generates more warnings WARNING: vmlinux - Section mismatch: reference to .init.data:new_cpu_data from .text between 'checkCPUtype' (at offset 0xc0100126) and 'is486' WARNING: vmlinux - Section mismatch: reference to .init.data:new_cpu_data from .text between 'checkCPUtype' (at offset 0xc0100130) and 'is486' Signed-off-by: Vivek Goyal Signed-off-by: Andrew Morton Signed-off-by: Andi Kleen diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S index 6c7f711..734be55 100644 --- a/arch/i386/kernel/head.S +++ b/arch/i386/kernel/head.S @@ -53,6 +53,7 @@ * any particular GDT layout, because we load our own as soon as we * can. */ +.section .text.head,"ax",@progbits ENTRY(startup_32) #ifdef CONFIG_PARAVIRT @@ -141,16 +142,25 @@ page_pde_offset = (__PAGE_OFFSET >> 20); jb 10b movl %edi,(init_pg_tables_end - __PAGE_OFFSET) -#ifdef CONFIG_SMP xorl %ebx,%ebx /* This is the boot CPU (BSP) */ jmp 3f - /* * Non-boot CPU entry point; entered from trampoline.S * We can't lgdt here, because lgdt itself uses a data segment, but * we know the trampoline has already loaded the boot_gdt_table GDT * for us. + * + * If cpu hotplug is not supported then this code can go in init section + * which will be freed later */ + +#ifdef CONFIG_HOTPLUG_CPU +.section .text,"ax",@progbits +#else +.section .init.text,"ax",@progbits +#endif + +#ifdef CONFIG_SMP ENTRY(startup_32_smp) cld movl $(__BOOT_DS),%eax @@ -208,8 +218,8 @@ ENTRY(startup_32_smp) xorl %ebx,%ebx incl %ebx -3: #endif /* CONFIG_SMP */ +3: /* * Enable paging @@ -492,6 +502,7 @@ ignore_int: #endif iret +.section .text #ifdef CONFIG_PARAVIRT startup_paravirt: cld diff --git a/arch/i386/kernel/vmlinux.lds.S b/arch/i386/kernel/vmlinux.lds.S index 5038a73..ca516109 100644 --- a/arch/i386/kernel/vmlinux.lds.S +++ b/arch/i386/kernel/vmlinux.lds.S @@ -37,9 +37,14 @@ SECTIONS { . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR; phys_startup_32 = startup_32 - LOAD_OFFSET; + + .text.head : AT(ADDR(.text.head) - LOAD_OFFSET) { + _text = .; /* Text and read-only data */ + *(.text.head) + } :text = 0x9090 + /* read-only */ .text : AT(ADDR(.text) - LOAD_OFFSET) { - _text = .; /* Text and read-only data */ *(.text) SCHED_TEXT LOCK_TEXT diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index 2aa4762..569e684 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -641,12 +641,20 @@ static int secref_whitelist(const char *modname, const char *tosec, if (f1 && f2) return 1; - /* Whitelist all references from .pci_fixup section if vmlinux */ + /* Whitelist all references from .pci_fixup section if vmlinux + * Whitelist all refereces from .text.head to .init.data if vmlinux + * Whitelist all refereces from .text.head to .init.text if vmlinux + */ if (is_vmlinux(modname)) { if ((strcmp(fromsec, ".pci_fixup") == 0) && (strcmp(tosec, ".init.text") == 0)) return 1; + if ((strcmp(fromsec, ".text.head") == 0) && + ((strcmp(tosec, ".init.data") == 0) || + (strcmp(tosec, ".init.text") == 0))) + return 1; + /* Check for pattern 3 */ for (s = pat3refsym; *s; s++) if (strcmp(refsymname, *s) == 0) -- cgit v0.10.2 From ee5bfa642a0d4b0f6ec6200bf96e5e647f93fcdb Mon Sep 17 00:00:00 2001 From: Vivek Goyal Date: Tue, 13 Feb 2007 13:26:22 +0100 Subject: [PATCH] generic: Break init() in two parts to avoid MODPOST warnings o init() is a non __init function in .text section but it calls many functions which are in .init.text section. Hence MODPOST generates lots of cross reference warnings on i386 if compiled with CONFIG_RELOCATABLE=y WARNING: vmlinux - Section mismatch: reference to .init.text:smp_prepare_cpus from .text between 'init' (at offset 0xc0101049) and 'rest_init' WARNING: vmlinux - Section mismatch: reference to .init.text:migration_init from .text between 'init' (at offset 0xc010104e) and 'rest_init' WARNING: vmlinux - Section mismatch: reference to .init.text:spawn_ksoftirqd from .text between 'init' (at offset 0xc0101053) and 'rest_init' o This patch breaks down init() in two parts. One part which can go in .init.text section and can be freed and other part which has to be non __init(init_post()). Now init() calls init_post() and init_post() does not call any functions present in .init sections. Hence getting rid of warnings. Signed-off-by: Vivek Goyal Signed-off-by: Andrew Morton Signed-off-by: Andi Kleen diff --git a/init/main.c b/init/main.c index 4e9e92b..62ded9f 100644 --- a/init/main.c +++ b/init/main.c @@ -727,7 +727,49 @@ static void run_init_process(char *init_filename) kernel_execve(init_filename, argv_init, envp_init); } -static int init(void * unused) +/* This is a non __init function. Force it to be noinline otherwise gcc + * makes it inline to init() and it becomes part of init.text section + */ +static int noinline init_post(void) +{ + free_initmem(); + unlock_kernel(); + mark_rodata_ro(); + system_state = SYSTEM_RUNNING; + numa_default_policy(); + + if (sys_open((const char __user *) "/dev/console", O_RDWR, 0) < 0) + printk(KERN_WARNING "Warning: unable to open an initial console.\n"); + + (void) sys_dup(0); + (void) sys_dup(0); + + if (ramdisk_execute_command) { + run_init_process(ramdisk_execute_command); + printk(KERN_WARNING "Failed to execute %s\n", + ramdisk_execute_command); + } + + /* + * We try each of these until one succeeds. + * + * The Bourne shell can be used instead of init if we are + * trying to recover a really broken machine. + */ + if (execute_command) { + run_init_process(execute_command); + printk(KERN_WARNING "Failed to execute %s. Attempting " + "defaults...\n", execute_command); + } + run_init_process("/sbin/init"); + run_init_process("/etc/init"); + run_init_process("/bin/init"); + run_init_process("/bin/sh"); + + panic("No init found. Try passing init= option to kernel."); +} + +static int __init init(void * unused) { lock_kernel(); /* @@ -775,39 +817,6 @@ static int init(void * unused) * we're essentially up and running. Get rid of the * initmem segments and start the user-mode stuff.. */ - free_initmem(); - unlock_kernel(); - mark_rodata_ro(); - system_state = SYSTEM_RUNNING; - numa_default_policy(); - - if (sys_open((const char __user *) "/dev/console", O_RDWR, 0) < 0) - printk(KERN_WARNING "Warning: unable to open an initial console.\n"); - - (void) sys_dup(0); - (void) sys_dup(0); - - if (ramdisk_execute_command) { - run_init_process(ramdisk_execute_command); - printk(KERN_WARNING "Failed to execute %s\n", - ramdisk_execute_command); - } - - /* - * We try each of these until one succeeds. - * - * The Bourne shell can be used instead of init if we are - * trying to recover a really broken machine. - */ - if (execute_command) { - run_init_process(execute_command); - printk(KERN_WARNING "Failed to execute %s. Attempting " - "defaults...\n", execute_command); - } - run_init_process("/sbin/init"); - run_init_process("/etc/init"); - run_init_process("/bin/init"); - run_init_process("/bin/sh"); - - panic("No init found. Try passing init= option to kernel."); + init_post(); + return 0; } -- cgit v0.10.2 From 86a978837ca739842317c4cf433de36aeb85ea3b Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 13 Feb 2007 13:26:22 +0100 Subject: [PATCH] i386: arch/i386/kernel/cpu/mcheck/mce.c should #include Every file should include the headers containing the prototypes for it's global functions. Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Andi Kleen diff --git a/arch/i386/kernel/cpu/mcheck/mce.c b/arch/i386/kernel/cpu/mcheck/mce.c index d555bec..4f10c62 100644 --- a/arch/i386/kernel/cpu/mcheck/mce.c +++ b/arch/i386/kernel/cpu/mcheck/mce.c @@ -12,6 +12,7 @@ #include #include +#include #include "mce.h" -- cgit v0.10.2 From 2ff2d3d74705d34ab71b21f54634fcf50d57bdd5 Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Tue, 13 Feb 2007 13:26:22 +0100 Subject: [PATCH] i386: add idle notifier Add a notifier mechanism to the low level idle loop. You can register a callback function which gets invoked on entry and exit from the low level idle loop. The low level idle loop is defined as the polling loop, low-power call, or the mwait instruction. Interrupts processed by the idle thread are not considered part of the low level loop. The notifier can be used to measure precisely how much is spent in useless execution (or low power mode). The perfmon subsystem uses it to turn on/off monitoring. Signed-off-by: stephane eranian Signed-off-by: Andrew Morton Signed-off-by: Andi Kleen diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c index 629c5ed..f4159e0 100644 --- a/arch/i386/kernel/apic.c +++ b/arch/i386/kernel/apic.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #include @@ -1255,6 +1256,7 @@ fastcall void smp_apic_timer_interrupt(struct pt_regs *regs) * Besides, if we don't timer interrupts ignore the global * interrupt lock, which is the WrongThing (tm) to do. */ + exit_idle(); irq_enter(); smp_local_timer_interrupt(); irq_exit(); @@ -1305,6 +1307,7 @@ fastcall void smp_spurious_interrupt(struct pt_regs *regs) { unsigned long v; + exit_idle(); irq_enter(); /* * Check if this really is a spurious interrupt and ACK it @@ -1329,6 +1332,7 @@ fastcall void smp_error_interrupt(struct pt_regs *regs) { unsigned long v, v1; + exit_idle(); irq_enter(); /* First tickle the hardware, only then report what went on. -- REW */ v = apic_read(APIC_ESR); diff --git a/arch/i386/kernel/cpu/mcheck/p4.c b/arch/i386/kernel/cpu/mcheck/p4.c index 504434a..8359c19 100644 --- a/arch/i386/kernel/cpu/mcheck/p4.c +++ b/arch/i386/kernel/cpu/mcheck/p4.c @@ -12,6 +12,7 @@ #include #include #include +#include #include @@ -59,6 +60,7 @@ static void (*vendor_thermal_interrupt)(struct pt_regs *regs) = unexpected_therm fastcall void smp_thermal_interrupt(struct pt_regs *regs) { + exit_idle(); irq_enter(); vendor_thermal_interrupt(regs); irq_exit(); diff --git a/arch/i386/kernel/irq.c b/arch/i386/kernel/irq.c index 3201d42..5785d84 100644 --- a/arch/i386/kernel/irq.c +++ b/arch/i386/kernel/irq.c @@ -19,6 +19,8 @@ #include #include +#include + DEFINE_PER_CPU(irq_cpustat_t, irq_stat) ____cacheline_internodealigned_in_smp; EXPORT_PER_CPU_SYMBOL(irq_stat); @@ -61,6 +63,7 @@ fastcall unsigned int do_IRQ(struct pt_regs *regs) union irq_ctx *curctx, *irqctx; u32 *isp; #endif + exit_idle(); if (unlikely((unsigned)irq >= NR_IRQS)) { printk(KERN_EMERG "%s: cannot handle IRQ %d\n", diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c index 05be774..7845d48 100644 --- a/arch/i386/kernel/process.c +++ b/arch/i386/kernel/process.c @@ -48,6 +48,7 @@ #include #include #include +#include #ifdef CONFIG_MATH_EMULATION #include #endif @@ -80,6 +81,42 @@ void (*pm_idle)(void); EXPORT_SYMBOL(pm_idle); static DEFINE_PER_CPU(unsigned int, cpu_idle_state); +static ATOMIC_NOTIFIER_HEAD(idle_notifier); + +void idle_notifier_register(struct notifier_block *n) +{ + atomic_notifier_chain_register(&idle_notifier, n); +} + +void idle_notifier_unregister(struct notifier_block *n) +{ + atomic_notifier_chain_unregister(&idle_notifier, n); +} + +static DEFINE_PER_CPU(volatile unsigned long, idle_state); + +void enter_idle(void) +{ + /* needs to be atomic w.r.t. interrupts, not against other CPUs */ + __set_bit(0, &__get_cpu_var(idle_state)); + atomic_notifier_call_chain(&idle_notifier, IDLE_START, NULL); +} + +static void __exit_idle(void) +{ + /* needs to be atomic w.r.t. interrupts, not against other CPUs */ + if (__test_and_clear_bit(0, &__get_cpu_var(idle_state)) == 0) + return; + atomic_notifier_call_chain(&idle_notifier, IDLE_END, NULL); +} + +void exit_idle(void) +{ + if (current->pid) + return; + __exit_idle(); +} + void disable_hlt(void) { hlt_counter++; @@ -130,6 +167,7 @@ EXPORT_SYMBOL(default_idle); */ static void poll_idle (void) { + local_irq_enable(); cpu_relax(); } @@ -189,7 +227,16 @@ void cpu_idle(void) play_dead(); __get_cpu_var(irq_stat).idle_timestamp = jiffies; + + /* + * Idle routines should keep interrupts disabled + * from here on, until they go to idle. + * Otherwise, idle callbacks can misfire. + */ + local_irq_disable(); + enter_idle(); idle(); + __exit_idle(); } preempt_enable_no_resched(); schedule(); @@ -243,7 +290,11 @@ void mwait_idle_with_hints(unsigned long eax, unsigned long ecx) __monitor((void *)¤t_thread_info()->flags, 0, 0); smp_mb(); if (!need_resched()) - __mwait(eax, ecx); + __sti_mwait(eax, ecx); + else + local_irq_enable(); + } else { + local_irq_enable(); } } diff --git a/arch/i386/kernel/smp.c b/arch/i386/kernel/smp.c index 5285aff..ffc4f65 100644 --- a/arch/i386/kernel/smp.c +++ b/arch/i386/kernel/smp.c @@ -23,6 +23,7 @@ #include #include +#include #include /* @@ -624,6 +625,7 @@ fastcall void smp_call_function_interrupt(struct pt_regs *regs) /* * At this point the info structure may be out of scope unless wait==1 */ + exit_idle(); irq_enter(); (*func)(info); irq_exit(); diff --git a/include/asm-i386/idle.h b/include/asm-i386/idle.h new file mode 100644 index 0000000..87ab939 --- /dev/null +++ b/include/asm-i386/idle.h @@ -0,0 +1,14 @@ +#ifndef _ASM_I386_IDLE_H +#define _ASM_I386_IDLE_H 1 + +#define IDLE_START 1 +#define IDLE_END 2 + +struct notifier_block; +void idle_notifier_register(struct notifier_block *n); +void idle_notifier_unregister(struct notifier_block *n); + +void exit_idle(void); +void enter_idle(void); + +#endif diff --git a/include/asm-i386/processor.h b/include/asm-i386/processor.h index 11bf899..edfbe46 100644 --- a/include/asm-i386/processor.h +++ b/include/asm-i386/processor.h @@ -257,6 +257,14 @@ static inline void __mwait(unsigned long eax, unsigned long ecx) : :"a" (eax), "c" (ecx)); } +static inline void __sti_mwait(unsigned long eax, unsigned long ecx) +{ + /* "mwait %eax,%ecx;" */ + asm volatile( + "sti; .byte 0x0f,0x01,0xc9;" + : :"a" (eax), "c" (ecx)); +} + extern void mwait_idle_with_hints(unsigned long eax, unsigned long ecx); /* from system description table in BIOS. Mostly for MCA use, but -- cgit v0.10.2 From f9690982b8c2f9a2c65acdc113e758ec356676a3 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 13 Feb 2007 13:26:22 +0100 Subject: [PATCH] i386: improve sched_clock() on i686 Clean up sched_clock() on i686: it will use the TSC if available and falls back to jiffies only if the user asked for it to be disabled via notsc or the CPU calibration code didnt figure out the right cpu_khz. This generally makes the scheduler timestamps more finegrained, on all hardware. (the current scheduler is pretty resistant against asynchronous sched_clock() values on different CPUs, it will allow at most up to a jiffy of jitter.) Also simplify sched_clock()'s check for TSC availability: propagate the desire and ability to use the TSC into the tsc_disable flag, previously this flag only indicated whether the notsc option was passed. This makes the rare low-res sched_clock() codepath a single branch off a read-mostly flag. Signed-off-by: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Andi Kleen diff --git a/arch/i386/kernel/tsc.c b/arch/i386/kernel/tsc.c index 12fef14..46f752a 100644 --- a/arch/i386/kernel/tsc.c +++ b/arch/i386/kernel/tsc.c @@ -112,13 +112,10 @@ unsigned long long sched_clock(void) return (*custom_sched_clock)(); /* - * in the NUMA case we dont use the TSC as they are not - * synchronized across all CPUs. + * Fall back to jiffies if there's no TSC available: */ -#ifndef CONFIG_NUMA - if (!cpu_khz || check_tsc_unstable()) -#endif - /* no locking but a rare wrong value is not a big deal */ + if (unlikely(tsc_disable)) + /* No locking but a rare wrong value is not a big deal: */ return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ); /* read the Time Stamp Counter: */ @@ -198,13 +195,13 @@ EXPORT_SYMBOL(recalibrate_cpu_khz); void __init tsc_init(void) { if (!cpu_has_tsc || tsc_disable) - return; + goto out_no_tsc; cpu_khz = calculate_cpu_khz(); tsc_khz = cpu_khz; if (!cpu_khz) - return; + goto out_no_tsc; printk("Detected %lu.%03lu MHz processor.\n", (unsigned long)cpu_khz / 1000, @@ -212,6 +209,15 @@ void __init tsc_init(void) set_cyc2ns_scale(cpu_khz); use_tsc_delay(); + return; + +out_no_tsc: + /* + * Set the tsc_disable flag if there's no TSC support, this + * makes it a fast flag for the kernel to see whether it + * should be using the TSC. + */ + tsc_disable = 1; } #ifdef CONFIG_CPU_FREQ diff --git a/include/asm-i386/bugs.h b/include/asm-i386/bugs.h index 38f1aeb..c90c7c4 100644 --- a/include/asm-i386/bugs.h +++ b/include/asm-i386/bugs.h @@ -160,7 +160,7 @@ static void __init check_config(void) * If we configured ourselves for a TSC, we'd better have one! */ #ifdef CONFIG_X86_TSC - if (!cpu_has_tsc) + if (!cpu_has_tsc && !tsc_disable) panic("Kernel compiled for Pentium+, requires TSC feature!"); #endif -- cgit v0.10.2 From 3b3d5e1db66cd66148b2cebd2c38aff2a8df03d6 Mon Sep 17 00:00:00 2001 From: Rene Herman Date: Tue, 13 Feb 2007 13:26:22 +0100 Subject: [PATCH] i386: romsignature/checksum cleanup Use adding __init to romsignature() (it's only called from probe_roms() which is itself __init) as an excuse to submit a pedantic cleanup. Signed-off-by: Rene Herman Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton diff --git a/arch/i386/kernel/e820.c b/arch/i386/kernel/e820.c index 9ded1e4..70f3956 100644 --- a/arch/i386/kernel/e820.c +++ b/arch/i386/kernel/e820.c @@ -157,21 +157,22 @@ static struct resource standard_io_resources[] = { { .flags = IORESOURCE_BUSY | IORESOURCE_IO } }; -static int romsignature(const unsigned char *x) +#define ROMSIGNATURE 0xaa55 + +static int __init romsignature(const unsigned char *rom) { unsigned short sig; - int ret = 0; - if (probe_kernel_address((const unsigned short *)x, sig) == 0) - ret = (sig == 0xaa55); - return ret; + + return probe_kernel_address((const unsigned short *)rom, sig) == 0 && + sig == ROMSIGNATURE; } static int __init romchecksum(unsigned char *rom, unsigned long length) { - unsigned char *p, sum = 0; + unsigned char sum; - for (p = rom; p < rom + length; p++) - sum += *p; + for (sum = 0; length; length--) + sum += *rom++; return sum == 0; } -- cgit v0.10.2 From 53fee04f318222a3179ca5933d8bda82c1eef17a Mon Sep 17 00:00:00 2001 From: Rohit Seth Date: Tue, 13 Feb 2007 13:26:22 +0100 Subject: [PATCH] x86-64: Fix fake numa for x86_64 machines with big IO hole This patch resolves the issue of running with numa=fake=X on kernel command line on x86_64 machines that have big IO hole. While calculating the size of each node now we look at the total hole size in that range. Previously there were nodes that only had IO holes in them causing kernel boot problems. We now use the NODE_MIN_SIZE (64MB) as the minimum size of memory that any node must have. We reduce the number of allocated nodes if the number of nodes specified on kernel command line results in any node getting memory smaller than NODE_MIN_SIZE. This change allows the extra memory to be incremented in NODE_MIN_SIZE granule and uniformly distribute among as many nodes (called big nodes) as possible. [akpm@osdl.org: build fix] Signed-off-by: David Rientjes Signed-off-by: Paul Menage Signed-off-by: Rohit Seth Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton diff --git a/arch/x86_64/kernel/e820.c b/arch/x86_64/kernel/e820.c index 9d67955..4651fd2 100644 --- a/arch/x86_64/kernel/e820.c +++ b/arch/x86_64/kernel/e820.c @@ -191,6 +191,37 @@ unsigned long __init e820_end_of_ram(void) } /* + * Find the hole size in the range. + */ +unsigned long __init e820_hole_size(unsigned long start, unsigned long end) +{ + unsigned long ram = 0; + int i; + + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + unsigned long last, addr; + + if (ei->type != E820_RAM || + ei->addr+ei->size <= start || + ei->addr >= end) + continue; + + addr = round_up(ei->addr, PAGE_SIZE); + if (addr < start) + addr = start; + + last = round_down(ei->addr + ei->size, PAGE_SIZE); + if (last >= end) + last = end; + + if (last > addr) + ram += last - addr; + } + return ((end - start) - ram); +} + +/* * Mark e820 reserved areas as busy for the resource manager. */ void __init e820_reserve_resources(void) diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c index 1ec16ea..d3f747d 100644 --- a/arch/x86_64/mm/numa.c +++ b/arch/x86_64/mm/numa.c @@ -272,31 +272,113 @@ void __init numa_init_array(void) } #ifdef CONFIG_NUMA_EMU +/* Numa emulation */ int numa_fake __initdata = 0; -/* Numa emulation */ +/* + * This function is used to find out if the start and end correspond to + * different zones. + */ +int zone_cross_over(unsigned long start, unsigned long end) +{ + if ((start < (MAX_DMA32_PFN << PAGE_SHIFT)) && + (end >= (MAX_DMA32_PFN << PAGE_SHIFT))) + return 1; + return 0; +} + static int __init numa_emulation(unsigned long start_pfn, unsigned long end_pfn) { - int i; + int i, big; struct bootnode nodes[MAX_NUMNODES]; - unsigned long sz = ((end_pfn - start_pfn)< 1) { - unsigned long x = 1; - while ((x << 1) < sz) - x <<= 1; - if (x < sz/2) - printk(KERN_ERR "Numa emulation unbalanced. Complain to maintainer\n"); - sz = x; - } + old_sz = sz; + /* + * Round down to the nearest FAKE_NODE_MIN_SIZE. + */ + sz &= FAKE_NODE_MIN_HASH_MASK; + + /* + * We ensure that each node is at least 64MB big. Smaller than this + * size can cause VM hiccups. + */ + if (sz == 0) { + printk(KERN_INFO "Not enough memory for %d nodes. Reducing " + "the number of nodes\n", numa_fake); + numa_fake = (max_addr - start - hole_size) / FAKE_NODE_MIN_SIZE; + printk(KERN_INFO "Number of fake nodes will be = %d\n", + numa_fake); + sz = FAKE_NODE_MIN_SIZE; + } + /* + * Find out how many nodes can get an extra NODE_MIN_SIZE granule. + * This logic ensures the extra memory gets distributed among as many + * nodes as possible (as compared to one single node getting all that + * extra memory. + */ + big = ((old_sz - sz) * numa_fake) / FAKE_NODE_MIN_SIZE; + printk(KERN_INFO "Fake node Size: %luMB hole_size: %luMB big nodes: " + "%d\n", + (sz >> 20), (hole_size >> 20), big); memset(&nodes,0,sizeof(nodes)); + end = start; for (i = 0; i < numa_fake; i++) { - nodes[i].start = (start_pfn<= max_addr) { + numa_fake = i - 1; + break; + } + start = nodes[i].start = end; + /* + * Final node can have all the remaining memory. + */ if (i == numa_fake-1) - sz = (end_pfn<= max_addr) + break; + } + /* + * Look at the next node to make sure there is some real memory + * to map. Bad things happen when the only memory present + * in a zone on a fake node is IO hole. + */ + while (e820_hole_size(end, end + FAKE_NODE_MIN_SIZE) > 0) { + if (zone_cross_over(start, end + sz)) { + end = (MAX_DMA32_PFN << PAGE_SHIFT); + break; + } + if (end >= max_addr) + break; + end += FAKE_NODE_MIN_SIZE; + } + if (end > max_addr) + end = max_addr; + nodes[i].end = end; printk(KERN_INFO "Faking node %d at %016Lx-%016Lx (%LuMB)\n", i, nodes[i].start, nodes[i].end, diff --git a/include/asm-x86_64/e820.h b/include/asm-x86_64/e820.h index 855fb4a..6216fa3 100644 --- a/include/asm-x86_64/e820.h +++ b/include/asm-x86_64/e820.h @@ -46,6 +46,7 @@ extern void e820_mark_nosave_regions(void); extern void e820_print_map(char *who); extern int e820_any_mapped(unsigned long start, unsigned long end, unsigned type); extern int e820_all_mapped(unsigned long start, unsigned long end, unsigned type); +extern unsigned long e820_hole_size(unsigned long start, unsigned long end); extern void e820_setup_gap(void); extern void e820_register_active_regions(int nid, diff --git a/include/asm-x86_64/mmzone.h b/include/asm-x86_64/mmzone.h index 39ef106..fb558fb 100644 --- a/include/asm-x86_64/mmzone.h +++ b/include/asm-x86_64/mmzone.h @@ -47,5 +47,10 @@ static inline __attribute__((pure)) int phys_to_nid(unsigned long addr) extern int pfn_valid(unsigned long pfn); #endif +#ifdef CONFIG_NUMA_EMU +#define FAKE_NODE_MIN_SIZE (64*1024*1024) +#define FAKE_NODE_MIN_HASH_MASK (~(FAKE_NODE_MIN_SIZE - 1ul)) +#endif + #endif #endif -- cgit v0.10.2 From c49c5330c9592f29a69bb2ea8f6e7fd5d9c151e8 Mon Sep 17 00:00:00 2001 From: Glauber de Oliveira Costa Date: Tue, 13 Feb 2007 13:26:22 +0100 Subject: [PATCH] x86-64: Remove fastcall references in x86_64 code Unlike x86, x86_64 already passes arguments in registers. The use of regparm attribute makes no difference in produced code, and the use of fastcall just bloats the code. Signed-off-by: Glauber de Oliveira Costa Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton diff --git a/arch/x86_64/kernel/acpi/sleep.c b/arch/x86_64/kernel/acpi/sleep.c index 5ebf62c..23178ce 100644 --- a/arch/x86_64/kernel/acpi/sleep.c +++ b/arch/x86_64/kernel/acpi/sleep.c @@ -58,7 +58,7 @@ unsigned long acpi_wakeup_address = 0; unsigned long acpi_video_flags; extern char wakeup_start, wakeup_end; -extern unsigned long FASTCALL(acpi_copy_wakeup_routine(unsigned long)); +extern unsigned long acpi_copy_wakeup_routine(unsigned long); static pgd_t low_ptr; diff --git a/arch/x86_64/kernel/x8664_ksyms.c b/arch/x86_64/kernel/x8664_ksyms.c index 23a7da3..0dffae6 100644 --- a/arch/x86_64/kernel/x8664_ksyms.c +++ b/arch/x86_64/kernel/x8664_ksyms.c @@ -35,8 +35,8 @@ EXPORT_SYMBOL(copy_page); EXPORT_SYMBOL(clear_page); #ifdef CONFIG_SMP -extern void FASTCALL( __write_lock_failed(rwlock_t *rw)); -extern void FASTCALL( __read_lock_failed(rwlock_t *rw)); +extern void __write_lock_failed(rwlock_t *rw); +extern void __read_lock_failed(rwlock_t *rw); EXPORT_SYMBOL(__write_lock_failed); EXPORT_SYMBOL(__read_lock_failed); #endif diff --git a/include/asm-x86_64/hw_irq.h b/include/asm-x86_64/hw_irq.h index 179cce7..552df5f 100644 --- a/include/asm-x86_64/hw_irq.h +++ b/include/asm-x86_64/hw_irq.h @@ -91,7 +91,7 @@ extern void enable_8259A_irq(unsigned int irq); extern int i8259A_irq_pending(unsigned int irq); extern void make_8259A_irq(unsigned int irq); extern void init_8259A(int aeoi); -extern void FASTCALL(send_IPI_self(int vector)); +extern void send_IPI_self(int vector); extern void init_VISWS_APIC_irqs(void); extern void setup_IO_APIC(void); extern void disable_IO_APIC(void); diff --git a/include/asm-x86_64/mutex.h b/include/asm-x86_64/mutex.h index 16396b1..6c2949a 100644 --- a/include/asm-x86_64/mutex.h +++ b/include/asm-x86_64/mutex.h @@ -21,7 +21,7 @@ do { \ unsigned long dummy; \ \ typecheck(atomic_t *, v); \ - typecheck_fn(fastcall void (*)(atomic_t *), fail_fn); \ + typecheck_fn(void (*)(atomic_t *), fail_fn); \ \ __asm__ __volatile__( \ LOCK_PREFIX " decl (%%rdi) \n" \ @@ -47,7 +47,7 @@ do { \ */ static inline int __mutex_fastpath_lock_retval(atomic_t *count, - int fastcall (*fail_fn)(atomic_t *)) + int (*fail_fn)(atomic_t *)) { if (unlikely(atomic_dec_return(count) < 0)) return fail_fn(count); @@ -67,7 +67,7 @@ do { \ unsigned long dummy; \ \ typecheck(atomic_t *, v); \ - typecheck_fn(fastcall void (*)(atomic_t *), fail_fn); \ + typecheck_fn(void (*)(atomic_t *), fail_fn); \ \ __asm__ __volatile__( \ LOCK_PREFIX " incl (%%rdi) \n" \ -- cgit v0.10.2 From 4c3cbf75b262433afc90b5c35510d1e5744d3b94 Mon Sep 17 00:00:00 2001 From: Glauber de Oliveira Costa Date: Tue, 13 Feb 2007 13:26:22 +0100 Subject: [PATCH] x86-64: Use constant instead of raw number in x86_64 ioperm.c This is a tiny cleanup to increase readability Signed-off-by: Glauber de Oliveira Costa Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton diff --git a/arch/x86_64/kernel/ioport.c b/arch/x86_64/kernel/ioport.c index fe063d3..745b1f0 100644 --- a/arch/x86_64/kernel/ioport.c +++ b/arch/x86_64/kernel/ioport.c @@ -114,6 +114,6 @@ asmlinkage long sys_iopl(unsigned int level, struct pt_regs *regs) if (!capable(CAP_SYS_RAWIO)) return -EPERM; } - regs->eflags = (regs->eflags &~ 0x3000UL) | (level << 12); + regs->eflags = (regs->eflags &~ X86_EFLAGS_IOPL) | (level << 12); return 0; } -- cgit v0.10.2 From 1676193937a538fdb92a2916a86a705093cfd613 Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Tue, 13 Feb 2007 13:26:22 +0100 Subject: [PATCH] x86-64: Handle 32 bit PerfMon Counter writes cleanly in x86_64 nmi_watchdog P6 CPUs and Core/Core 2 CPUs which has 'architectural perf mon' feature, only supports write of low 32 bits in Performance Monitoring Counters. Bits 32..39 are sign extended based on bit 31 and bits 40..63 are reserved and should be zero. This patch: Change x86_64 nmi handler to handle this case cleanly. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Andi Kleen diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c index 9cb42ec..e59cda1 100644 --- a/arch/x86_64/kernel/nmi.c +++ b/arch/x86_64/kernel/nmi.c @@ -214,6 +214,23 @@ static __init void nmi_cpu_busy(void *data) } #endif +static unsigned int adjust_for_32bit_ctr(unsigned int hz) +{ + unsigned int retval = hz; + + /* + * On Intel CPUs with ARCH_PERFMON only 32 bits in the counter + * are writable, with higher bits sign extending from bit 31. + * So, we can only program the counter with 31 bit values and + * 32nd bit should be 1, for 33.. to be 1. + * Find the appropriate nmi_hz + */ + if ((((u64)cpu_khz * 1000) / retval) > 0x7fffffffULL) { + retval = ((u64)cpu_khz * 1000) / 0x7fffffffUL + 1; + } + return retval; +} + int __init check_nmi_watchdog (void) { int *counts; @@ -268,17 +285,8 @@ int __init check_nmi_watchdog (void) struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); nmi_hz = 1; - /* - * On Intel CPUs with ARCH_PERFMON only 32 bits in the counter - * are writable, with higher bits sign extending from bit 31. - * So, we can only program the counter with 31 bit values and - * 32nd bit should be 1, for 33.. to be 1. - * Find the appropriate nmi_hz - */ - if (wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0 && - ((u64)cpu_khz * 1000) > 0x7fffffffULL) { - nmi_hz = ((u64)cpu_khz * 1000) / 0x7fffffffUL + 1; - } + if (wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0) + nmi_hz = adjust_for_32bit_ctr(nmi_hz); } kfree(counts); @@ -634,7 +642,9 @@ static int setup_intel_arch_watchdog(void) /* setup the timer */ wrmsr(evntsel_msr, evntsel, 0); - wrmsrl(perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz)); + + nmi_hz = adjust_for_32bit_ctr(nmi_hz); + wrmsr(perfctr_msr, (u32)(-((u64)cpu_khz * 1000 / nmi_hz)), 0); apic_write(APIC_LVTPC, APIC_DM_NMI); evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE; @@ -855,15 +865,23 @@ int __kprobes nmi_watchdog_tick(struct pt_regs * regs, unsigned reason) dummy &= ~P4_CCCR_OVF; wrmsrl(wd->cccr_msr, dummy); apic_write(APIC_LVTPC, APIC_DM_NMI); + /* start the cycle over again */ + wrmsrl(wd->perfctr_msr, + -((u64)cpu_khz * 1000 / nmi_hz)); } else if (wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0) { /* * ArchPerfom/Core Duo needs to re-unmask * the apic vector */ apic_write(APIC_LVTPC, APIC_DM_NMI); + /* ARCH_PERFMON has 32 bit counter writes */ + wrmsr(wd->perfctr_msr, + (u32)(-((u64)cpu_khz * 1000 / nmi_hz)), 0); + } else { + /* start the cycle over again */ + wrmsrl(wd->perfctr_msr, + -((u64)cpu_khz * 1000 / nmi_hz)); } - /* start the cycle over again */ - wrmsrl(wd->perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz)); rc = 1; } else if (nmi_watchdog == NMI_IO_APIC) { /* don't know how to accurately check for this. -- cgit v0.10.2 From 90ce4bc4542c10b63dc6482ac920ff1226a6e5ff Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Tue, 13 Feb 2007 13:26:22 +0100 Subject: [PATCH] i386: Handle 32 bit PerfMon Counter writes cleanly in i386 nmi_watchdog Change i386 nmi handler to handle 32 bit perfmon counter MSR writes cleanly. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Andi Kleen diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c index 1a6f8bb..7d3f4e2 100644 --- a/arch/i386/kernel/nmi.c +++ b/arch/i386/kernel/nmi.c @@ -216,6 +216,28 @@ static __init void nmi_cpu_busy(void *data) } #endif +static unsigned int adjust_for_32bit_ctr(unsigned int hz) +{ + u64 counter_val; + unsigned int retval = hz; + + /* + * On Intel CPUs with P6/ARCH_PERFMON only 32 bits in the counter + * are writable, with higher bits sign extending from bit 31. + * So, we can only program the counter with 31 bit values and + * 32nd bit should be 1, for 33.. to be 1. + * Find the appropriate nmi_hz + */ + counter_val = (u64)cpu_khz * 1000; + do_div(counter_val, retval); + if (counter_val > 0x7fffffffULL) { + u64 count = (u64)cpu_khz * 1000; + do_div(count, 0x7fffffffUL); + retval = count + 1; + } + return retval; +} + static int __init check_nmi_watchdog(void) { unsigned int *prev_nmi_count; @@ -281,18 +303,10 @@ static int __init check_nmi_watchdog(void) struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); nmi_hz = 1; - /* - * On Intel CPUs with ARCH_PERFMON only 32 bits in the counter - * are writable, with higher bits sign extending from bit 31. - * So, we can only program the counter with 31 bit values and - * 32nd bit should be 1, for 33.. to be 1. - * Find the appropriate nmi_hz - */ - if (wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0 && - ((u64)cpu_khz * 1000) > 0x7fffffffULL) { - u64 count = (u64)cpu_khz * 1000; - do_div(count, 0x7fffffffUL); - nmi_hz = count + 1; + + if (wd->perfctr_msr == MSR_P6_PERFCTR0 || + wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0) { + nmi_hz = adjust_for_32bit_ctr(nmi_hz); } } @@ -442,6 +456,17 @@ static void write_watchdog_counter(unsigned int perfctr_msr, const char *descr) wrmsrl(perfctr_msr, 0 - count); } +static void write_watchdog_counter32(unsigned int perfctr_msr, + const char *descr) +{ + u64 count = (u64)cpu_khz * 1000; + + do_div(count, nmi_hz); + if(descr) + Dprintk("setting %s to -0x%08Lx\n", descr, count); + wrmsr(perfctr_msr, (u32)(-count), 0); +} + /* Note that these events don't tick when the CPU idles. This means the frequency varies with CPU load. */ @@ -531,7 +556,8 @@ static int setup_p6_watchdog(void) /* setup the timer */ wrmsr(evntsel_msr, evntsel, 0); - write_watchdog_counter(perfctr_msr, "P6_PERFCTR0"); + nmi_hz = adjust_for_32bit_ctr(nmi_hz); + write_watchdog_counter32(perfctr_msr, "P6_PERFCTR0"); apic_write(APIC_LVTPC, APIC_DM_NMI); evntsel |= P6_EVNTSEL0_ENABLE; wrmsr(evntsel_msr, evntsel, 0); @@ -704,7 +730,8 @@ static int setup_intel_arch_watchdog(void) /* setup the timer */ wrmsr(evntsel_msr, evntsel, 0); - write_watchdog_counter(perfctr_msr, "INTEL_ARCH_PERFCTR0"); + nmi_hz = adjust_for_32bit_ctr(nmi_hz); + write_watchdog_counter32(perfctr_msr, "INTEL_ARCH_PERFCTR0"); apic_write(APIC_LVTPC, APIC_DM_NMI); evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE; wrmsr(evntsel_msr, evntsel, 0); @@ -956,6 +983,8 @@ __kprobes int nmi_watchdog_tick(struct pt_regs * regs, unsigned reason) dummy &= ~P4_CCCR_OVF; wrmsrl(wd->cccr_msr, dummy); apic_write(APIC_LVTPC, APIC_DM_NMI); + /* start the cycle over again */ + write_watchdog_counter(wd->perfctr_msr, NULL); } else if (wd->perfctr_msr == MSR_P6_PERFCTR0 || wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0) { @@ -964,9 +993,12 @@ __kprobes int nmi_watchdog_tick(struct pt_regs * regs, unsigned reason) * other P6 variant. * ArchPerfom/Core Duo also needs this */ apic_write(APIC_LVTPC, APIC_DM_NMI); + /* P6/ARCH_PERFMON has 32 bit counter write */ + write_watchdog_counter32(wd->perfctr_msr, NULL); + } else { + /* start the cycle over again */ + write_watchdog_counter(wd->perfctr_msr, NULL); } - /* start the cycle over again */ - write_watchdog_counter(wd->perfctr_msr, NULL); rc = 1; } else if (nmi_watchdog == NMI_IO_APIC) { /* don't know how to accurately check for this. -- cgit v0.10.2 From 44264261d8fb87849118e41b2735bd95db28126f Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Tue, 13 Feb 2007 13:26:23 +0100 Subject: [PATCH] i386: Handle 32 bit PerfMon Counter writes cleanly in oprofile Handle these 32 bit perfmon counter MSR writes cleanly in oprofile. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Andi Kleen diff --git a/arch/i386/oprofile/op_model_ppro.c b/arch/i386/oprofile/op_model_ppro.c index ca2447e..c554f52 100644 --- a/arch/i386/oprofile/op_model_ppro.c +++ b/arch/i386/oprofile/op_model_ppro.c @@ -24,7 +24,8 @@ #define CTR_IS_RESERVED(msrs,c) (msrs->counters[(c)].addr ? 1 : 0) #define CTR_READ(l,h,msrs,c) do {rdmsr(msrs->counters[(c)].addr, (l), (h));} while (0) -#define CTR_WRITE(l,msrs,c) do {wrmsr(msrs->counters[(c)].addr, -(u32)(l), -1);} while (0) +#define CTR_32BIT_WRITE(l,msrs,c) \ + do {wrmsr(msrs->counters[(c)].addr, -(u32)(l), 0);} while (0) #define CTR_OVERFLOWED(n) (!((n) & (1U<<31))) #define CTRL_IS_RESERVED(msrs,c) (msrs->controls[(c)].addr ? 1 : 0) @@ -79,7 +80,7 @@ static void ppro_setup_ctrs(struct op_msrs const * const msrs) for (i = 0; i < NUM_COUNTERS; ++i) { if (unlikely(!CTR_IS_RESERVED(msrs,i))) continue; - CTR_WRITE(1, msrs, i); + CTR_32BIT_WRITE(1, msrs, i); } /* enable active counters */ @@ -87,7 +88,7 @@ static void ppro_setup_ctrs(struct op_msrs const * const msrs) if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs,i))) { reset_value[i] = counter_config[i].count; - CTR_WRITE(counter_config[i].count, msrs, i); + CTR_32BIT_WRITE(counter_config[i].count, msrs, i); CTRL_READ(low, high, msrs, i); CTRL_CLEAR(low); @@ -116,7 +117,7 @@ static int ppro_check_ctrs(struct pt_regs * const regs, CTR_READ(low, high, msrs, i); if (CTR_OVERFLOWED(low)) { oprofile_add_sample(regs, i); - CTR_WRITE(reset_value[i], msrs, i); + CTR_32BIT_WRITE(reset_value[i], msrs, i); } } -- cgit v0.10.2 From 57d307720c9a60038f134b0567ca302b88313a0a Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 13 Feb 2007 13:26:23 +0100 Subject: [PATCH] x86-64: cleanup Doc/x86_64/ files Fix typos. Lots of whitespace changes for readability and consistency. Signed-off-by: Randy Dunlap Signed-off-by: Andi Kleen diff --git a/Documentation/x86_64/boot-options.txt b/Documentation/x86_64/boot-options.txt index 0d65399..625a21d 100644 --- a/Documentation/x86_64/boot-options.txt +++ b/Documentation/x86_64/boot-options.txt @@ -226,9 +226,9 @@ IOMMU (input/output memory management unit) is 20. memaper[=] Allocate an own aperture over RAM with size 32MB< Date: Tue, 13 Feb 2007 13:26:23 +0100 Subject: [PATCH] x86-64: list x86_64 quilt tree List x86_64 quilt tree in MAINTAINERS. Signed-off-by: Randy Dunlap Signed-off-by: Andi Kleen diff --git a/MAINTAINERS b/MAINTAINERS index f85c603..011dd1d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3768,6 +3768,7 @@ P: Andi Kleen M: ak@suse.de L: discuss@x86-64.org W: http://www.x86-64.org +T: quilt ftp://ftp.firstfloor.org/pub/ak/x86_64/quilt-current S: Maintained YAM DRIVER FOR AX.25 -- cgit v0.10.2 From 9b355897562fe2291248a7aec8e479c2c98cf117 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 13 Feb 2007 13:26:23 +0100 Subject: [PATCH] x86: simplify notify_page_fault() Remove all parameters from this function that aren't really variable. Signed-off-by: Jan Beulich Signed-off-by: Andi Kleen diff --git a/arch/i386/mm/fault.c b/arch/i386/mm/fault.c index cba9b38..b8c4e25 100644 --- a/arch/i386/mm/fault.c +++ b/arch/i386/mm/fault.c @@ -46,17 +46,17 @@ int unregister_page_fault_notifier(struct notifier_block *nb) } EXPORT_SYMBOL_GPL(unregister_page_fault_notifier); -static inline int notify_page_fault(enum die_val val, const char *str, - struct pt_regs *regs, long err, int trap, int sig) +static inline int notify_page_fault(struct pt_regs *regs, long err) { struct die_args args = { .regs = regs, - .str = str, + .str = "page fault", .err = err, - .trapnr = trap, - .signr = sig + .trapnr = 14, + .signr = SIGSEGV }; - return atomic_notifier_call_chain(¬ify_page_fault_chain, val, &args); + return atomic_notifier_call_chain(¬ify_page_fault_chain, + DIE_PAGE_FAULT, &args); } /* @@ -327,8 +327,7 @@ fastcall void __kprobes do_page_fault(struct pt_regs *regs, if (unlikely(address >= TASK_SIZE)) { if (!(error_code & 0x0000000d) && vmalloc_fault(address) >= 0) return; - if (notify_page_fault(DIE_PAGE_FAULT, "page fault", regs, error_code, 14, - SIGSEGV) == NOTIFY_STOP) + if (notify_page_fault(regs, error_code) == NOTIFY_STOP) return; /* * Don't take the mm semaphore here. If we fixup a prefetch @@ -337,8 +336,7 @@ fastcall void __kprobes do_page_fault(struct pt_regs *regs, goto bad_area_nosemaphore; } - if (notify_page_fault(DIE_PAGE_FAULT, "page fault", regs, error_code, 14, - SIGSEGV) == NOTIFY_STOP) + if (notify_page_fault(regs, error_code) == NOTIFY_STOP) return; /* It's safe to allow irq's after cr2 has been saved and the vmalloc diff --git a/arch/x86_64/mm/fault.c b/arch/x86_64/mm/fault.c index 49e8cf2..6ada723 100644 --- a/arch/x86_64/mm/fault.c +++ b/arch/x86_64/mm/fault.c @@ -56,17 +56,17 @@ int unregister_page_fault_notifier(struct notifier_block *nb) } EXPORT_SYMBOL_GPL(unregister_page_fault_notifier); -static inline int notify_page_fault(enum die_val val, const char *str, - struct pt_regs *regs, long err, int trap, int sig) +static inline int notify_page_fault(struct pt_regs *regs, long err) { struct die_args args = { .regs = regs, - .str = str, + .str = "page fault", .err = err, - .trapnr = trap, - .signr = sig + .trapnr = 14, + .signr = SIGSEGV }; - return atomic_notifier_call_chain(¬ify_page_fault_chain, val, &args); + return atomic_notifier_call_chain(¬ify_page_fault_chain, + DIE_PAGE_FAULT, &args); } /* Sometimes the CPU reports invalid exceptions on prefetch. @@ -355,8 +355,7 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, if (vmalloc_fault(address) >= 0) return; } - if (notify_page_fault(DIE_PAGE_FAULT, "page fault", regs, error_code, 14, - SIGSEGV) == NOTIFY_STOP) + if (notify_page_fault(regs, error_code) == NOTIFY_STOP) return; /* * Don't take the mm semaphore here. If we fixup a prefetch @@ -365,8 +364,7 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, goto bad_area_nosemaphore; } - if (notify_page_fault(DIE_PAGE_FAULT, "page fault", regs, error_code, 14, - SIGSEGV) == NOTIFY_STOP) + if (notify_page_fault(regs, error_code) == NOTIFY_STOP) return; if (likely(regs->eflags & X86_EFLAGS_IF)) -- cgit v0.10.2 From 24ce0e96f2dea558762c994d054ea2f3c01fa95a Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 13 Feb 2007 13:26:23 +0100 Subject: [PATCH] x86-64: Tighten mce_amd driver MSR reads while debugging an unrelated problem in Xen, I noticed odd reads from non-existent MSRs. Having now found time to look why these happen, I came up with below patch, which - prevents accessing MCi_MISCj with j > 0 when the block pointer in MCi_MISC0 is zero - accesses only contiguous MCi_MISCj until a non-implemented one is found - doesn't touch unimplemented blocks in mce_threshold_interrupt at all - gives names to two bits previously derived from MASK_VALID_HI (it took me some time to understand the code without this) The first three items, besides being apparently closer to the spec, should namely help cutting down on the time mce_threshold_interrupt() takes. Signed-off-by: Andi Kleen diff --git a/arch/x86_64/kernel/mce_amd.c b/arch/x86_64/kernel/mce_amd.c index 93c7072..cd8dbe5 100644 --- a/arch/x86_64/kernel/mce_amd.c +++ b/arch/x86_64/kernel/mce_amd.c @@ -37,6 +37,8 @@ #define THRESHOLD_MAX 0xFFF #define INT_TYPE_APIC 0x00020000 #define MASK_VALID_HI 0x80000000 +#define MASK_CNTP_HI 0x40000000 +#define MASK_LOCKED_HI 0x20000000 #define MASK_LVTOFF_HI 0x00F00000 #define MASK_COUNT_EN_HI 0x00080000 #define MASK_INT_TYPE_HI 0x00060000 @@ -122,14 +124,17 @@ void __cpuinit mce_amd_feature_init(struct cpuinfo_x86 *c) for (block = 0; block < NR_BLOCKS; ++block) { if (block == 0) address = MSR_IA32_MC0_MISC + bank * 4; - else if (block == 1) - address = MCG_XBLK_ADDR - + ((low & MASK_BLKPTR_LO) >> 21); + else if (block == 1) { + address = (low & MASK_BLKPTR_LO) >> 21; + if (!address) + break; + address += MCG_XBLK_ADDR; + } else ++address; if (rdmsr_safe(address, &low, &high)) - continue; + break; if (!(high & MASK_VALID_HI)) { if (block) @@ -138,8 +143,8 @@ void __cpuinit mce_amd_feature_init(struct cpuinfo_x86 *c) break; } - if (!(high & MASK_VALID_HI >> 1) || - (high & MASK_VALID_HI >> 2)) + if (!(high & MASK_CNTP_HI) || + (high & MASK_LOCKED_HI)) continue; if (!block) @@ -187,17 +192,22 @@ asmlinkage void mce_threshold_interrupt(void) /* assume first bank caused it */ for (bank = 0; bank < NR_BANKS; ++bank) { + if (!(per_cpu(bank_map, m.cpu) & (1 << bank))) + continue; for (block = 0; block < NR_BLOCKS; ++block) { if (block == 0) address = MSR_IA32_MC0_MISC + bank * 4; - else if (block == 1) - address = MCG_XBLK_ADDR - + ((low & MASK_BLKPTR_LO) >> 21); + else if (block == 1) { + address = (low & MASK_BLKPTR_LO) >> 21; + if (!address) + break; + address += MCG_XBLK_ADDR; + } else ++address; if (rdmsr_safe(address, &low, &high)) - continue; + break; if (!(high & MASK_VALID_HI)) { if (block) @@ -206,8 +216,8 @@ asmlinkage void mce_threshold_interrupt(void) break; } - if (!(high & MASK_VALID_HI >> 1) || - (high & MASK_VALID_HI >> 2)) + if (!(high & MASK_CNTP_HI) || + (high & MASK_LOCKED_HI)) continue; if (high & MASK_OVERFLOW_HI) { @@ -385,7 +395,7 @@ static __cpuinit int allocate_threshold_blocks(unsigned int cpu, return 0; if (rdmsr_safe(address, &low, &high)) - goto recurse; + return 0; if (!(high & MASK_VALID_HI)) { if (block) @@ -394,8 +404,8 @@ static __cpuinit int allocate_threshold_blocks(unsigned int cpu, return 0; } - if (!(high & MASK_VALID_HI >> 1) || - (high & MASK_VALID_HI >> 2)) + if (!(high & MASK_CNTP_HI) || + (high & MASK_LOCKED_HI)) goto recurse; b = kzalloc(sizeof(struct threshold_block), GFP_KERNEL); -- cgit v0.10.2 From a98f0dd34d94ea0b5f3816196bea5dba467827bb Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:23 +0100 Subject: [PATCH] x86-64: Allow to run a program when a machine check event is detected When a machine check event is detected (including a AMD RevF threshold overflow event) allow to run a "trigger" program. This allows user space to react to such events sooner. The trigger is configured using a new trigger entry in the machinecheck sysfs interface. It is currently shared between all CPUs. I also fixed the AMD threshold handler to run the machine check polling code immediately to actually log any events that might have caused the threshold interrupt. Also added some documentation for the mce sysfs interface. Signed-off-by: Andi Kleen diff --git a/Documentation/x86_64/machinecheck b/Documentation/x86_64/machinecheck new file mode 100644 index 0000000..068a6d9 --- /dev/null +++ b/Documentation/x86_64/machinecheck @@ -0,0 +1,70 @@ + +Configurable sysfs parameters for the x86-64 machine check code. + +Machine checks report internal hardware error conditions detected +by the CPU. Uncorrected errors typically cause a machine check +(often with panic), corrected ones cause a machine check log entry. + +Machine checks are organized in banks (normally associated with +a hardware subsystem) and subevents in a bank. The exact meaning +of the banks and subevent is CPU specific. + +mcelog knows how to decode them. + +When you see the "Machine check errors logged" message in the system +log then mcelog should run to collect and decode machine check entries +from /dev/mcelog. Normally mcelog should be run regularly from a cronjob. + +Each CPU has a directory in /sys/devices/system/machinecheck/machinecheckN +(N = CPU number) + +The directory contains some configurable entries: + +Entries: + +bankNctl +(N bank number) + 64bit Hex bitmask enabling/disabling specific subevents for bank N + When a bit in the bitmask is zero then the respective + subevent will not be reported. + By default all events are enabled. + Note that BIOS maintain another mask to disable specific events + per bank. This is not visible here + +The following entries appear for each CPU, but they are truly shared +between all CPUs. + +check_interval + How often to poll for corrected machine check errors, in seconds + (Note output is hexademical). Default 5 minutes. + +tolerant + Tolerance level. When a machine check exception occurs for a non + corrected machine check the kernel can take different actions. + Since machine check exceptions can happen any time it is sometimes + risky for the kernel to kill a process because it defies + normal kernel locking rules. The tolerance level configures + how hard the kernel tries to recover even at some risk of deadlock. + + 0: always panic, + 1: panic if deadlock possible, + 2: try to avoid panic, + 3: never panic or exit (for testing only) + + Default: 1 + + Note this only makes a difference if the CPU allows recovery + from a machine check exception. Current x86 CPUs generally do not. + +trigger + Program to run when a machine check event is detected. + This is an alternative to running mcelog regularly from cron + and allows to detect events faster. + +TBD document entries for AMD threshold interrupt configuration + +For more details about the x86 machine check architecture +see the Intel and AMD architecture manuals from their developer websites. + +For more details about the architecture see +see http://one.firstfloor.org/~andi/mce.pdf diff --git a/arch/x86_64/kernel/mce.c b/arch/x86_64/kernel/mce.c index bdb54a2..8011a8e 100644 --- a/arch/x86_64/kernel/mce.c +++ b/arch/x86_64/kernel/mce.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -42,6 +43,10 @@ static unsigned long console_logged; static int notify_user; static int rip_msr; static int mce_bootlog = 1; +static atomic_t mce_events; + +static char trigger[128]; +static char *trigger_argv[2] = { trigger, NULL }; /* * Lockless MCE logging infrastructure. @@ -57,6 +62,7 @@ struct mce_log mcelog = { void mce_log(struct mce *mce) { unsigned next, entry; + atomic_inc(&mce_events); mce->finished = 0; wmb(); for (;;) { @@ -161,6 +167,17 @@ static inline void mce_get_rip(struct mce *m, struct pt_regs *regs) } } +static void do_mce_trigger(void) +{ + static atomic_t mce_logged; + int events = atomic_read(&mce_events); + if (events != atomic_read(&mce_logged) && trigger[0]) { + /* Small race window, but should be harmless. */ + atomic_set(&mce_logged, events); + call_usermodehelper(trigger, trigger_argv, NULL, -1); + } +} + /* * The actual machine check handler */ @@ -234,8 +251,12 @@ void do_machine_check(struct pt_regs * regs, long error_code) } /* Never do anything final in the polling timer */ - if (!regs) + if (!regs) { + /* Normal interrupt context here. Call trigger for any new + events. */ + do_mce_trigger(); goto out; + } /* If we didn't find an uncorrectable error, pick the last one (shouldn't happen, just being safe). */ @@ -606,17 +627,42 @@ DEFINE_PER_CPU(struct sys_device, device_mce); } \ static SYSDEV_ATTR(name, 0644, show_ ## name, set_ ## name); +/* TBD should generate these dynamically based on number of available banks */ ACCESSOR(bank0ctl,bank[0],mce_restart()) ACCESSOR(bank1ctl,bank[1],mce_restart()) ACCESSOR(bank2ctl,bank[2],mce_restart()) ACCESSOR(bank3ctl,bank[3],mce_restart()) ACCESSOR(bank4ctl,bank[4],mce_restart()) ACCESSOR(bank5ctl,bank[5],mce_restart()) -static struct sysdev_attribute * bank_attributes[NR_BANKS] = { - &attr_bank0ctl, &attr_bank1ctl, &attr_bank2ctl, - &attr_bank3ctl, &attr_bank4ctl, &attr_bank5ctl}; + +static ssize_t show_trigger(struct sys_device *s, char *buf) +{ + strcpy(buf, trigger); + strcat(buf, "\n"); + return strlen(trigger) + 1; +} + +static ssize_t set_trigger(struct sys_device *s,const char *buf,size_t siz) +{ + char *p; + int len; + strncpy(trigger, buf, sizeof(trigger)); + trigger[sizeof(trigger)-1] = 0; + len = strlen(trigger); + p = strchr(trigger, '\n'); + if (*p) *p = 0; + return len; +} + +static SYSDEV_ATTR(trigger, 0644, show_trigger, set_trigger); ACCESSOR(tolerant,tolerant,) ACCESSOR(check_interval,check_interval,mce_restart()) +static struct sysdev_attribute *mce_attributes[] = { + &attr_bank0ctl, &attr_bank1ctl, &attr_bank2ctl, + &attr_bank3ctl, &attr_bank4ctl, &attr_bank5ctl, + &attr_tolerant, &attr_check_interval, &attr_trigger, + NULL +}; /* Per cpu sysdev init. All of the cpus still share the same ctl bank */ static __cpuinit int mce_create_device(unsigned int cpu) @@ -632,11 +678,9 @@ static __cpuinit int mce_create_device(unsigned int cpu) err = sysdev_register(&per_cpu(device_mce,cpu)); if (!err) { - for (i = 0; i < banks; i++) + for (i = 0; mce_attributes[i]; i++) sysdev_create_file(&per_cpu(device_mce,cpu), - bank_attributes[i]); - sysdev_create_file(&per_cpu(device_mce,cpu), &attr_tolerant); - sysdev_create_file(&per_cpu(device_mce,cpu), &attr_check_interval); + mce_attributes[i]); } return err; } @@ -645,11 +689,9 @@ static void mce_remove_device(unsigned int cpu) { int i; - for (i = 0; i < banks; i++) + for (i = 0; mce_attributes[i]; i++) sysdev_remove_file(&per_cpu(device_mce,cpu), - bank_attributes[i]); - sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_tolerant); - sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_check_interval); + mce_attributes[i]); sysdev_unregister(&per_cpu(device_mce,cpu)); memset(&per_cpu(device_mce, cpu).kobj, 0, sizeof(struct kobject)); } diff --git a/arch/x86_64/kernel/mce_amd.c b/arch/x86_64/kernel/mce_amd.c index cd8dbe5..d0bd5d6 100644 --- a/arch/x86_64/kernel/mce_amd.c +++ b/arch/x86_64/kernel/mce_amd.c @@ -220,6 +220,10 @@ asmlinkage void mce_threshold_interrupt(void) (high & MASK_LOCKED_HI)) continue; + /* Log the machine check that caused the threshold + event. */ + do_machine_check(NULL, 0); + if (high & MASK_OVERFLOW_HI) { rdmsrl(address, m.misc); rdmsrl(MSR_IA32_MC0_STATUS + bank * 4, diff --git a/include/asm-x86_64/mce.h b/include/asm-x86_64/mce.h index 5a11146..177e92b 100644 --- a/include/asm-x86_64/mce.h +++ b/include/asm-x86_64/mce.h @@ -103,6 +103,8 @@ void mce_log_therm_throt_event(unsigned int cpu, __u64 status); extern atomic_t mce_entry; +extern void do_machine_check(struct pt_regs *, long); + #endif #endif diff --git a/kernel/kmod.c b/kernel/kmod.c index 3a7379a..7962761 100644 --- a/kernel/kmod.c +++ b/kernel/kmod.c @@ -217,7 +217,10 @@ static int wait_for_helper(void *data) sub_info->retval = ret; } - complete(sub_info->complete); + if (sub_info->wait < 0) + kfree(sub_info); + else + complete(sub_info->complete); return 0; } @@ -239,6 +242,9 @@ static void __call_usermodehelper(struct work_struct *work) pid = kernel_thread(____call_usermodehelper, sub_info, CLONE_VFORK | SIGCHLD); + if (wait < 0) + return; + if (pid < 0) { sub_info->retval = pid; complete(sub_info->complete); @@ -253,6 +259,9 @@ static void __call_usermodehelper(struct work_struct *work) * @envp: null-terminated environment list * @session_keyring: session keyring for process (NULL for an empty keyring) * @wait: wait for the application to finish and return status. + * when -1 don't wait at all, but you get no useful error back when + * the program couldn't be exec'ed. This makes it safe to call + * from interrupt context. * * Runs a user-space application. The application is started * asynchronously if wait is not set, and runs as a child of keventd. @@ -265,17 +274,8 @@ int call_usermodehelper_keys(char *path, char **argv, char **envp, struct key *session_keyring, int wait) { DECLARE_COMPLETION_ONSTACK(done); - struct subprocess_info sub_info = { - .work = __WORK_INITIALIZER(sub_info.work, - __call_usermodehelper), - .complete = &done, - .path = path, - .argv = argv, - .envp = envp, - .ring = session_keyring, - .wait = wait, - .retval = 0, - }; + struct subprocess_info *sub_info; + int retval; if (!khelper_wq) return -EBUSY; @@ -283,9 +283,25 @@ int call_usermodehelper_keys(char *path, char **argv, char **envp, if (path[0] == '\0') return 0; - queue_work(khelper_wq, &sub_info.work); + sub_info = kzalloc(sizeof(struct subprocess_info), GFP_ATOMIC); + if (!sub_info) + return -ENOMEM; + + INIT_WORK(&sub_info->work, __call_usermodehelper); + sub_info->complete = &done; + sub_info->path = path; + sub_info->argv = argv; + sub_info->envp = envp; + sub_info->ring = session_keyring; + sub_info->wait = wait; + + queue_work(khelper_wq, &sub_info->work); + if (wait < 0) /* task has freed sub_info */ + return 0; wait_for_completion(&done); - return sub_info.retval; + retval = sub_info->retval; + kfree(sub_info); + return retval; } EXPORT_SYMBOL(call_usermodehelper_keys); -- cgit v0.10.2 From 930f8b8bcde30b501fdf00fb7624aefb9bf35f47 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 13 Feb 2007 13:26:23 +0100 Subject: [PATCH] x86-64: remove get_pmd() Function is dead. Signed-off-by: Jan Beulich Signed-off-by: Andi Kleen diff --git a/include/asm-x86_64/pgalloc.h b/include/asm-x86_64/pgalloc.h index 43d4c33..4e28b60 100644 --- a/include/asm-x86_64/pgalloc.h +++ b/include/asm-x86_64/pgalloc.h @@ -18,11 +18,6 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, struct page *p set_pmd(pmd, __pmd(_PAGE_TABLE | (page_to_pfn(pte) << PAGE_SHIFT))); } -static inline pmd_t *get_pmd(void) -{ - return (pmd_t *)get_zeroed_page(GFP_KERNEL); -} - static inline void pmd_free(pmd_t *pmd) { BUG_ON((unsigned long)pmd & (PAGE_SIZE-1)); -- cgit v0.10.2 From 8c40ad02e5b026902b8ce134f895b3b09803db39 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:23 +0100 Subject: [PATCH] i386: Small cleanup to TLB flush code - Remove outdated comment - Use cpu_relax() in a busy loop Signed-off-by: Andi Kleen diff --git a/arch/i386/kernel/smp.c b/arch/i386/kernel/smp.c index ffc4f65..9bd9637 100644 --- a/arch/i386/kernel/smp.c +++ b/arch/i386/kernel/smp.c @@ -375,8 +375,7 @@ static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm, /* * i'm not happy about this global shared spinlock in the * MM hot path, but we'll see how contended it is. - * Temporarily this turns IRQs off, so that lockups are - * detected by the NMI watchdog. + * AK: x86-64 has a faster method that could be ported. */ spin_lock(&tlbstate_lock); @@ -401,7 +400,7 @@ static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm, while (!cpus_empty(flush_cpumask)) /* nothing. lockup detection does not belong here */ - mb(); + cpu_relax(); flush_mm = NULL; flush_va = 0; -- cgit v0.10.2 From edf8dd36b53fdd558bc9a8ac5be793d27e110f90 Mon Sep 17 00:00:00 2001 From: Nicolas Kaiser Date: Tue, 13 Feb 2007 13:26:23 +0100 Subject: [PATCH] x86-64: Kconfig typos Some typos in Kconfig. Signed-off-by: Nicolas Kaiser Signed-off-by: Andi Kleen diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index a55382a..7982cbc 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -152,18 +152,18 @@ config MPSC Optimize for Intel Pentium 4 and older Nocona/Dempsey Xeon CPUs with Intel Extended Memory 64 Technology(EM64T). For details see . - Note the the latest Xeons (Xeon 51xx and 53xx) are not based on the - Netburst core and shouldn't use this option. You can distingush them + Note that the latest Xeons (Xeon 51xx and 53xx) are not based on the + Netburst core and shouldn't use this option. You can distinguish them using the cpu family field - in /proc/cpuinfo. Family 15 is a older Xeon, Family 6 a newer one - (this rule only applies to system that support EM64T) + in /proc/cpuinfo. Family 15 is an older Xeon, Family 6 a newer one + (this rule only applies to systems that support EM64T) config MCORE2 bool "Intel Core2 / newer Xeon" help Optimize for Intel Core2 and newer Xeons (51xx) - You can distingush the newer Xeons from the older ones using - the cpu family field in /proc/cpuinfo. 15 is a older Xeon + You can distinguish the newer Xeons from the older ones using + the cpu family field in /proc/cpuinfo. 15 is an older Xeon (use CONFIG_MPSC then), 6 is a newer one. This rule only applies to CPUs that support EM64T. -- cgit v0.10.2 From d958f143329e685d114725b64fe6bef22994c74c Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 13 Feb 2007 13:26:23 +0100 Subject: [PATCH] i386: use smp_call_function_single() It will execute rdmsr and wrmsr only on the cpu we need. Signed-off-by: Alexey Dobriyan Signed-off-by: Andi Kleen diff --git a/arch/i386/kernel/msr.c b/arch/i386/kernel/msr.c index 4e14264..bcaa6e9 100644 --- a/arch/i386/kernel/msr.c +++ b/arch/i386/kernel/msr.c @@ -68,7 +68,6 @@ static inline int rdmsr_eio(u32 reg, u32 *eax, u32 *edx) #ifdef CONFIG_SMP struct msr_command { - int cpu; int err; u32 reg; u32 data[2]; @@ -78,16 +77,14 @@ static void msr_smp_wrmsr(void *cmd_block) { struct msr_command *cmd = (struct msr_command *)cmd_block; - if (cmd->cpu == smp_processor_id()) - cmd->err = wrmsr_eio(cmd->reg, cmd->data[0], cmd->data[1]); + cmd->err = wrmsr_eio(cmd->reg, cmd->data[0], cmd->data[1]); } static void msr_smp_rdmsr(void *cmd_block) { struct msr_command *cmd = (struct msr_command *)cmd_block; - if (cmd->cpu == smp_processor_id()) - cmd->err = rdmsr_eio(cmd->reg, &cmd->data[0], &cmd->data[1]); + cmd->err = rdmsr_eio(cmd->reg, &cmd->data[0], &cmd->data[1]); } static inline int do_wrmsr(int cpu, u32 reg, u32 eax, u32 edx) @@ -99,12 +96,11 @@ static inline int do_wrmsr(int cpu, u32 reg, u32 eax, u32 edx) if (cpu == smp_processor_id()) { ret = wrmsr_eio(reg, eax, edx); } else { - cmd.cpu = cpu; cmd.reg = reg; cmd.data[0] = eax; cmd.data[1] = edx; - smp_call_function(msr_smp_wrmsr, &cmd, 1, 1); + smp_call_function_single(cpu, msr_smp_wrmsr, &cmd, 1, 1); ret = cmd.err; } preempt_enable(); @@ -120,10 +116,9 @@ static inline int do_rdmsr(int cpu, u32 reg, u32 * eax, u32 * edx) if (cpu == smp_processor_id()) { ret = rdmsr_eio(reg, eax, edx); } else { - cmd.cpu = cpu; cmd.reg = reg; - smp_call_function(msr_smp_rdmsr, &cmd, 1, 1); + smp_call_function_single(cpu, msr_smp_rdmsr, &cmd, 1, 1); *eax = cmd.data[0]; *edx = cmd.data[1]; -- cgit v0.10.2 From ad4e680fb2220518de5118a8e734240d4c374fe2 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 13 Feb 2007 13:26:23 +0100 Subject: [PATCH] i386: use smp_call_function_single() It will execure cpuid only on the cpu we need. Signed-off-by: Alexey Dobriyan Signed-off-by: Andi Kleen diff --git a/arch/i386/kernel/cpuid.c b/arch/i386/kernel/cpuid.c index 4da75fa..eeae0d9 100644 --- a/arch/i386/kernel/cpuid.c +++ b/arch/i386/kernel/cpuid.c @@ -48,7 +48,6 @@ static struct class *cpuid_class; #ifdef CONFIG_SMP struct cpuid_command { - int cpu; u32 reg; u32 *data; }; @@ -57,8 +56,7 @@ static void cpuid_smp_cpuid(void *cmd_block) { struct cpuid_command *cmd = (struct cpuid_command *)cmd_block; - if (cmd->cpu == smp_processor_id()) - cpuid(cmd->reg, &cmd->data[0], &cmd->data[1], &cmd->data[2], + cpuid(cmd->reg, &cmd->data[0], &cmd->data[1], &cmd->data[2], &cmd->data[3]); } @@ -70,11 +68,10 @@ static inline void do_cpuid(int cpu, u32 reg, u32 * data) if (cpu == smp_processor_id()) { cpuid(reg, &data[0], &data[1], &data[2], &data[3]); } else { - cmd.cpu = cpu; cmd.reg = reg; cmd.data = data; - smp_call_function(cpuid_smp_cpuid, &cmd, 1, 1); + smp_call_function_single(cpu, cpuid_smp_cpuid, &cmd, 1, 1); } preempt_enable(); } -- cgit v0.10.2 From b0957f1a3a7687bfaf5b0bfe402b50985ea2f06b Mon Sep 17 00:00:00 2001 From: Josef 'Jeff' Sipek Date: Tue, 13 Feb 2007 13:26:23 +0100 Subject: [PATCH] x86-64: Fix preprocessor condition Old code was legal standard C, but apparently not sparse-C. Signed-off-by: Josef 'Jeff' Sipek Signed-off-by: Andi Kleen diff --git a/include/asm-x86_64/io.h b/include/asm-x86_64/io.h index f5d84bb..de2cd9a 100644 --- a/include/asm-x86_64/io.h +++ b/include/asm-x86_64/io.h @@ -100,7 +100,7 @@ __OUTS(l) #define IO_SPACE_LIMIT 0xffff -#if defined(__KERNEL__) && __x86_64__ +#if defined(__KERNEL__) && defined(__x86_64__) #include -- cgit v0.10.2 From 016d6f35803667ffbe3e7bba8b58a6b611fac998 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 13 Feb 2007 13:26:23 +0100 Subject: [PATCH] i386: Convert /proc/apm to seqfile Byte-to-byte identical /proc/apm here. Signed-off-by: Alexey Dobriyan Signed-off-by: Andi Kleen diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c index db99a89..f9ba0af 100644 --- a/arch/i386/kernel/apm.c +++ b/arch/i386/kernel/apm.c @@ -211,6 +211,7 @@ #include #include #include +#include #include #include #include @@ -1636,9 +1637,8 @@ static int do_open(struct inode * inode, struct file * filp) return 0; } -static int apm_get_info(char *buf, char **start, off_t fpos, int length) +static int proc_apm_show(struct seq_file *m, void *v) { - char * p; unsigned short bx; unsigned short cx; unsigned short dx; @@ -1650,8 +1650,6 @@ static int apm_get_info(char *buf, char **start, off_t fpos, int length) int time_units = -1; char *units = "?"; - p = buf; - if ((num_online_cpus() == 1) && !(error = apm_get_power_status(&bx, &cx, &dx))) { ac_line_status = (bx >> 8) & 0xff; @@ -1705,7 +1703,7 @@ static int apm_get_info(char *buf, char **start, off_t fpos, int length) -1: Unknown 8) min = minutes; sec = seconds */ - p += sprintf(p, "%s %d.%d 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n", + seq_printf(m, "%s %d.%d 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n", driver_version, (apm_info.bios.version >> 8) & 0xff, apm_info.bios.version & 0xff, @@ -1716,10 +1714,22 @@ static int apm_get_info(char *buf, char **start, off_t fpos, int length) percentage, time_units, units); + return 0; +} - return p - buf; +static int proc_apm_open(struct inode *inode, struct file *file) +{ + return single_open(file, proc_apm_show, NULL); } +static const struct file_operations apm_file_ops = { + .owner = THIS_MODULE, + .open = proc_apm_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + static int apm(void *unused) { unsigned short bx; @@ -2341,9 +2351,9 @@ static int __init apm_init(void) set_base(gdt[APM_DS >> 3], __va((unsigned long)apm_info.bios.dseg << 4)); - apm_proc = create_proc_info_entry("apm", 0, NULL, apm_get_info); + apm_proc = create_proc_entry("apm", 0, NULL); if (apm_proc) - apm_proc->owner = THIS_MODULE; + apm_proc->proc_fops = &apm_file_ops; kapmd_task = kthread_create(apm, NULL, "kapmd"); if (IS_ERR(kapmd_task)) { -- cgit v0.10.2 From 6c5806cae50717f31878d0da29109b10610ab862 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Tue, 13 Feb 2007 13:26:23 +0100 Subject: [PATCH] i386: fix size_or_mask and size_and_mask mtrr: fix size_or_mask and size_and_mask This fixes two bugs in /proc/mtrr interface: o If physical address size crosses the 44 bit boundary size_or_mask is evaluated wrong. o size_and_mask limits width of physical base address for an MTRR to be less than 44 bits. TBD: later patch had one more change, but I think that was bogus. TBD: need to double check Signed-off-by: Andreas Herrmann Signed-off-by: Andi Kleen diff --git a/arch/i386/kernel/cpu/mtrr/main.c b/arch/i386/kernel/cpu/mtrr/main.c index 16bb7ea..0acfb6a 100644 --- a/arch/i386/kernel/cpu/mtrr/main.c +++ b/arch/i386/kernel/cpu/mtrr/main.c @@ -50,7 +50,7 @@ u32 num_var_ranges = 0; unsigned int *usage_table; static DEFINE_MUTEX(mtrr_mutex); -u32 size_or_mask, size_and_mask; +u64 size_or_mask, size_and_mask; static struct mtrr_ops * mtrr_ops[X86_VENDOR_NUM] = {}; @@ -662,8 +662,8 @@ void __init mtrr_bp_init(void) boot_cpu_data.x86_mask == 0x4)) phys_addr = 36; - size_or_mask = ~((1 << (phys_addr - PAGE_SHIFT)) - 1); - size_and_mask = ~size_or_mask & 0xfff00000; + size_or_mask = ~((1ULL << (phys_addr - PAGE_SHIFT)) - 1); + size_and_mask = ~size_or_mask & 0xfffff00000ULL; } else if (boot_cpu_data.x86_vendor == X86_VENDOR_CENTAUR && boot_cpu_data.x86 == 6) { /* VIA C* family have Intel style MTRRs, but diff --git a/arch/i386/kernel/cpu/mtrr/mtrr.h b/arch/i386/kernel/cpu/mtrr/mtrr.h index d61ea9d..289dfe6 100644 --- a/arch/i386/kernel/cpu/mtrr/mtrr.h +++ b/arch/i386/kernel/cpu/mtrr/mtrr.h @@ -84,7 +84,7 @@ void get_mtrr_state(void); extern void set_mtrr_ops(struct mtrr_ops * ops); -extern u32 size_or_mask, size_and_mask; +extern u64 size_or_mask, size_and_mask; extern struct mtrr_ops * mtrr_if; #define is_cpu(vnd) (mtrr_if && mtrr_if->vendor == X86_VENDOR_##vnd) -- cgit v0.10.2 From 2f7a2a79c3ebb44f8b1b7d9b4fd3a650eb69e544 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Tue, 13 Feb 2007 13:26:24 +0100 Subject: [PATCH] x86-64: - Ignore long SMI interrupts in clock calibration code - update 1 Add failsafe mechanism to HPET/TSC clock calibration. Signed-off-by: Jack Steiner Updated to include failsafe mechanism & additional community feedback. Patch built on latest 2.6.20-rc4-mm1 tree. Signed-off-by: Andi Kleen diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index 335cc91..9c7fba3 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -657,6 +657,7 @@ core_initcall(cpufreq_tsc); #define TICK_COUNT 100000000 #define TICK_MIN 5000 +#define MAX_READ_RETRIES 5 /* * Some platforms take periodic SMI interrupts with 5ms duration. Make sure none @@ -664,13 +665,17 @@ core_initcall(cpufreq_tsc); */ static void __init read_hpet_tsc(int *hpet, int *tsc) { - int tsc1, tsc2, hpet1; + int tsc1, tsc2, hpet1, retries = 0; + static int msg; do { tsc1 = get_cycles_sync(); hpet1 = hpet_readl(HPET_COUNTER); tsc2 = get_cycles_sync(); - } while (tsc2 - tsc1 > TICK_MIN); + } while (tsc2 - tsc1 > TICK_MIN && retries++ < MAX_READ_RETRIES); + if (retries >= MAX_READ_RETRIES && !msg++) + printk(KERN_WARNING + "hpet.c: exceeded max retries to read HPET & TSC\n"); *hpet = hpet1; *tsc = tsc2; } -- cgit v0.10.2 From f49481bc50fce428521497977861b8115666dbe7 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:24 +0100 Subject: [PATCH] x86-64: Check return value of putreg in PTRACE_SETREGS This means if an illegal value is set for the segment registers there ptrace will error out now with an errno instead of silently ignoring it. Signed-off-by: Andi Kleen diff --git a/arch/x86_64/kernel/ptrace.c b/arch/x86_64/kernel/ptrace.c index addc14a..4326a69 100644 --- a/arch/x86_64/kernel/ptrace.c +++ b/arch/x86_64/kernel/ptrace.c @@ -536,8 +536,12 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) } ret = 0; for (ui = 0; ui < sizeof(struct user_regs_struct); ui += sizeof(long)) { - ret |= __get_user(tmp, (unsigned long __user *) data); - putreg(child, ui, tmp); + ret = __get_user(tmp, (unsigned long __user *) data); + if (ret) + break; + ret = putreg(child, ui, tmp); + if (ret) + break; data += sizeof(long); } break; -- cgit v0.10.2 From 9a11ff68273f440b1d33fcc4d550ffc881e6a0b4 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:24 +0100 Subject: [PATCH] x86-64: Unexport __supported_pte_mask The symbol is needed to manipulate page tables, and modules shouldn't do that. Leftover from 2.4, but no in tree module should need it now. Signed-off-by: Andi Kleen diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c index 8c4b80f..6a70b55 100644 --- a/arch/x86_64/kernel/setup64.c +++ b/arch/x86_64/kernel/setup64.c @@ -37,7 +37,6 @@ struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table }; char boot_cpu_stack[IRQSTACKSIZE] __attribute__((section(".bss.page_aligned"))); unsigned long __supported_pte_mask __read_mostly = ~0UL; -EXPORT_SYMBOL(__supported_pte_mask); static int do_not_nx __cpuinitdata = 0; /* noexec=on|off -- cgit v0.10.2 From ffb6017563aa15f9a8cff9a30b861d42c2695894 Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Tue, 13 Feb 2007 13:26:24 +0100 Subject: [PATCH] x86-64: x86_64 - Fix FS/GS registers for VT execution Initialize FS and GS to __KERNEL_DS as well. The actual value of them is not important, but it is important to reload them in protected mode. At this time, they still retain the real mode values from initial boot. VT disallows execution of code under such conditions, which means hardware virtualization can not be used to boot the kernel on Intel platforms, making the boot time painfully slow. This requires moving the GS load before the load of GS_BASE, so just move all the segments loads there to keep them together in the code. Signed-off-by: Zachary Amsden Signed-off-by: Andi Kleen diff --git a/arch/x86_64/kernel/head.S b/arch/x86_64/kernel/head.S index 1e6f808..598a4d0 100644 --- a/arch/x86_64/kernel/head.S +++ b/arch/x86_64/kernel/head.S @@ -163,6 +163,20 @@ startup_64: */ lgdt cpu_gdt_descr + /* set up data segments. actually 0 would do too */ + movl $__KERNEL_DS,%eax + movl %eax,%ds + movl %eax,%ss + movl %eax,%es + + /* + * We don't really need to load %fs or %gs, but load them anyway + * to kill any stale realmode selectors. This allows execution + * under VT hardware. + */ + movl %eax,%fs + movl %eax,%gs + /* * Setup up a dummy PDA. this is just for some early bootup code * that does in_interrupt() @@ -173,12 +187,6 @@ startup_64: shrq $32,%rdx wrmsr - /* set up data segments. actually 0 would do too */ - movl $__KERNEL_DS,%eax - movl %eax,%ds - movl %eax,%ss - movl %eax,%es - /* esi is pointer to real mode structure with interesting info. pass it to C */ movl %esi, %edi -- cgit v0.10.2 From 00edefae050c2c2d1e26fa9984f8f529fbc45989 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:24 +0100 Subject: [PATCH] x86-64: Fix off by one error in IOMMU boundary checking Should be harmless because there is normally no memory there, but technically it was incorrect. Pointed out by Leo Duran Signed-off-by: Andi Kleen diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c index fc1960f..030eb37 100644 --- a/arch/x86_64/kernel/pci-gart.c +++ b/arch/x86_64/kernel/pci-gart.c @@ -185,7 +185,7 @@ static void iommu_full(struct device *dev, size_t size, int dir) static inline int need_iommu(struct device *dev, unsigned long addr, size_t size) { u64 mask = *dev->dma_mask; - int high = addr + size >= mask; + int high = addr + size > mask; int mmu = high; if (force_iommu) mmu = 1; @@ -195,7 +195,7 @@ static inline int need_iommu(struct device *dev, unsigned long addr, size_t size static inline int nonforced_iommu(struct device *dev, unsigned long addr, size_t size) { u64 mask = *dev->dma_mask; - int high = addr + size >= mask; + int high = addr + size > mask; int mmu = high; return mmu; } -- cgit v0.10.2 From fc986db4fc1e773e240a19bc8b407ead88982cea Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:24 +0100 Subject: [PATCH] x86-64: Don't reserve ROMs We trust the e820 table, so explicitely reserving ROMs shouldn't be needed. Signed-off-by: Andi Kleen diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index f330f82..e82c1a1 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -138,128 +138,6 @@ struct resource code_resource = { .flags = IORESOURCE_RAM, }; -#define IORESOURCE_ROM (IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM) - -static struct resource system_rom_resource = { - .name = "System ROM", - .start = 0xf0000, - .end = 0xfffff, - .flags = IORESOURCE_ROM, -}; - -static struct resource extension_rom_resource = { - .name = "Extension ROM", - .start = 0xe0000, - .end = 0xeffff, - .flags = IORESOURCE_ROM, -}; - -static struct resource adapter_rom_resources[] = { - { .name = "Adapter ROM", .start = 0xc8000, .end = 0, - .flags = IORESOURCE_ROM }, - { .name = "Adapter ROM", .start = 0, .end = 0, - .flags = IORESOURCE_ROM }, - { .name = "Adapter ROM", .start = 0, .end = 0, - .flags = IORESOURCE_ROM }, - { .name = "Adapter ROM", .start = 0, .end = 0, - .flags = IORESOURCE_ROM }, - { .name = "Adapter ROM", .start = 0, .end = 0, - .flags = IORESOURCE_ROM }, - { .name = "Adapter ROM", .start = 0, .end = 0, - .flags = IORESOURCE_ROM } -}; - -static struct resource video_rom_resource = { - .name = "Video ROM", - .start = 0xc0000, - .end = 0xc7fff, - .flags = IORESOURCE_ROM, -}; - -static struct resource video_ram_resource = { - .name = "Video RAM area", - .start = 0xa0000, - .end = 0xbffff, - .flags = IORESOURCE_RAM, -}; - -#define romsignature(x) (*(unsigned short *)(x) == 0xaa55) - -static int __init romchecksum(unsigned char *rom, unsigned long length) -{ - unsigned char *p, sum = 0; - - for (p = rom; p < rom + length; p++) - sum += *p; - return sum == 0; -} - -static void __init probe_roms(void) -{ - unsigned long start, length, upper; - unsigned char *rom; - int i; - - /* video rom */ - upper = adapter_rom_resources[0].start; - for (start = video_rom_resource.start; start < upper; start += 2048) { - rom = isa_bus_to_virt(start); - if (!romsignature(rom)) - continue; - - video_rom_resource.start = start; - - /* 0 < length <= 0x7f * 512, historically */ - length = rom[2] * 512; - - /* if checksum okay, trust length byte */ - if (length && romchecksum(rom, length)) - video_rom_resource.end = start + length - 1; - - request_resource(&iomem_resource, &video_rom_resource); - break; - } - - start = (video_rom_resource.end + 1 + 2047) & ~2047UL; - if (start < upper) - start = upper; - - /* system rom */ - request_resource(&iomem_resource, &system_rom_resource); - upper = system_rom_resource.start; - - /* check for extension rom (ignore length byte!) */ - rom = isa_bus_to_virt(extension_rom_resource.start); - if (romsignature(rom)) { - length = extension_rom_resource.end - extension_rom_resource.start + 1; - if (romchecksum(rom, length)) { - request_resource(&iomem_resource, &extension_rom_resource); - upper = extension_rom_resource.start; - } - } - - /* check for adapter roms on 2k boundaries */ - for (i = 0; i < ARRAY_SIZE(adapter_rom_resources) && start < upper; - start += 2048) { - rom = isa_bus_to_virt(start); - if (!romsignature(rom)) - continue; - - /* 0 < length <= 0x7f * 512, historically */ - length = rom[2] * 512; - - /* but accept any length that fits if checksum okay */ - if (!length || start + length > upper || !romchecksum(rom, length)) - continue; - - adapter_rom_resources[i].start = start; - adapter_rom_resources[i].end = start + length - 1; - request_resource(&iomem_resource, &adapter_rom_resources[i]); - - start = adapter_rom_resources[i++].end & ~2047UL; - } -} - #ifdef CONFIG_PROC_VMCORE /* elfcorehdr= specifies the location of elf core header * stored by the crashed kernel. This option will be passed @@ -524,15 +402,11 @@ void __init setup_arch(char **cmdline_p) init_apic_mappings(); /* - * Request address space for all standard RAM and ROM resources - * and also for regions reported as reserved by the e820. - */ - probe_roms(); + * We trust e820 completely. No explicit ROM probing in memory. + */ e820_reserve_resources(); e820_mark_nosave_regions(); - request_resource(&iomem_resource, &video_ram_resource); - { unsigned i; /* request I/O space for devices used on all i[345]86 PCs */ -- cgit v0.10.2 From 2fa8a050a0026eadbb39a2f281011991e00fe29a Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 13 Feb 2007 13:26:24 +0100 Subject: [PATCH] x86-64: define dma noncoherent API functions x86-64 is missing these: Signed-off-by: Jeff Garzik Signed-off-by: Andi Kleen diff --git a/include/asm-x86_64/dma-mapping.h b/include/asm-x86_64/dma-mapping.h index 49dbab0..d2af227 100644 --- a/include/asm-x86_64/dma-mapping.h +++ b/include/asm-x86_64/dma-mapping.h @@ -66,6 +66,9 @@ static inline int dma_mapping_error(dma_addr_t dma_addr) #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) +#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) +#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) + extern void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp); extern void dma_free_coherent(struct device *dev, size_t size, void *vaddr, -- cgit v0.10.2 From 310adfdd9153f6ae818981a38a48dd2330990d8d Mon Sep 17 00:00:00 2001 From: Muli Ben-Yehuda Date: Tue, 13 Feb 2007 13:26:24 +0100 Subject: [PATCH] x86-64: robustify bad_dma_address handling - set bad_dma_address explicitly to 0x0 - reserve 32 pages from bad_dma_address and up - WARN_ON() a driver feeding us bad_dma_address Thanks to Leo Duran for the suggestion. Signed-off-by: Muli Ben-Yehuda Signed-off-by: Andi Kleen Cc: Leo Duran Cc: Job Mason diff --git a/arch/x86_64/kernel/pci-calgary.c b/arch/x86_64/kernel/pci-calgary.c index 3d65b1d..04480c3 100644 --- a/arch/x86_64/kernel/pci-calgary.c +++ b/arch/x86_64/kernel/pci-calgary.c @@ -138,6 +138,8 @@ static const unsigned long phb_debug_offsets[] = { #define PHB_DEBUG_STUFF_OFFSET 0x0020 +#define EMERGENCY_PAGES 32 /* = 128KB */ + unsigned int specified_table_size = TCE_TABLE_SIZE_UNSPECIFIED; static int translate_empty_slots __read_mostly = 0; static int calgary_detected __read_mostly = 0; @@ -296,6 +298,16 @@ static void __iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr, { unsigned long entry; unsigned long badbit; + unsigned long badend; + + /* were we called with bad_dma_address? */ + badend = bad_dma_address + (EMERGENCY_PAGES * PAGE_SIZE); + if (unlikely((dma_addr >= bad_dma_address) && (dma_addr < badend))) { + printk(KERN_ERR "Calgary: driver tried unmapping bad DMA " + "address 0x%Lx\n", dma_addr); + WARN_ON(1); + return; + } entry = dma_addr >> PAGE_SHIFT; @@ -656,8 +668,8 @@ static void __init calgary_reserve_regions(struct pci_dev *dev) u64 start; struct iommu_table *tbl = dev->sysdata; - /* reserve bad_dma_address in case it's a legal address */ - iommu_range_reserve(tbl, bad_dma_address, 1); + /* reserve EMERGENCY_PAGES from bad_dma_address and up */ + iommu_range_reserve(tbl, bad_dma_address, EMERGENCY_PAGES); /* avoid the BIOS/VGA first 640KB-1MB region */ start = (640 * 1024); @@ -1176,6 +1188,7 @@ int __init calgary_iommu_init(void) } force_iommu = 1; + bad_dma_address = 0x0; dma_ops = &calgary_dma_ops; return 0; -- cgit v0.10.2 From 5d0e600d903caa09e790824cc5812f0d97113b23 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 13 Feb 2007 13:26:24 +0100 Subject: [PATCH] x86: fix laptop bootup hang in init_acpi() During kernel bootup, a new T60 laptop (CoreDuo, 32-bit) hangs about 10%-20% of the time in acpi_init(): Calling initcall 0xc055ce1a: topology_init+0x0/0x2f() Calling initcall 0xc055d75e: mtrr_init_finialize+0x0/0x2c() Calling initcall 0xc05664f3: param_sysfs_init+0x0/0x175() Calling initcall 0xc014cb65: pm_sysrq_init+0x0/0x17() Calling initcall 0xc0569f99: init_bio+0x0/0xf4() Calling initcall 0xc056b865: genhd_device_init+0x0/0x50() Calling initcall 0xc056c4bd: fbmem_init+0x0/0x87() Calling initcall 0xc056dd74: acpi_init+0x0/0x1ee() It's a hard hang that not even an NMI could punch through! Frustratingly, adding printks or function tracing to the ACPI code made the hangs go away ... After some time an additional detail emerged: disabling the NMI watchdog made these occasional hangs go away. So i spent the better part of today trying to debug this and trying out various theories when i finally found the likely reason for the hang: if acpi_ns_initialize_devices() executes an _INI AML method and an NMI happens to hit that AML execution in the wrong moment, the machine would hang. (my theory is that this must be some sort of chipset setup method doing stores to chipset mmio registers?) Unfortunately given the characteristics of the hang it was sheer impossible to figure out which of the numerous AML methods is impacted by this problem. As a workaround i wrote an interface to disable chipset-based NMIs while executing _INI sections - and indeed this fixed the hang. I did a boot-loop of 100 separate reboots and none hung - while without the patch it would hang every 5-10 attempts. Out of caution i did not touch the nmi_watchdog=2 case (it's not related to the chipset anyway and didnt hang). I implemented this for both x86_64 and i686, tested the i686 laptop both with nmi_watchdog=1 [which triggered the hangs] and nmi_watchdog=2, and tested an Athlon64 box with the 64-bit kernel as well. Everything builds and works with the patch applied. Signed-off-by: Ingo Molnar Signed-off-by: Andi Kleen Cc: Andi Kleen Cc: Len Brown Signed-off-by: Andrew Morton diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c index 7d3f4e2..b11abac 100644 --- a/arch/i386/kernel/nmi.c +++ b/arch/i386/kernel/nmi.c @@ -383,6 +383,34 @@ void enable_timer_nmi_watchdog(void) } } +static void __acpi_nmi_disable(void *__unused) +{ + apic_write_around(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); +} + +/* + * Disable timer based NMIs on all CPUs: + */ +void acpi_nmi_disable(void) +{ + if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) + on_each_cpu(__acpi_nmi_disable, NULL, 0, 1); +} + +static void __acpi_nmi_enable(void *__unused) +{ + apic_write_around(APIC_LVT0, APIC_DM_NMI); +} + +/* + * Enable timer based NMIs on all CPUs: + */ +void acpi_nmi_enable(void) +{ + if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) + on_each_cpu(__acpi_nmi_enable, NULL, 0, 1); +} + #ifdef CONFIG_PM static int nmi_pm_active; /* nmi_active before suspend */ diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c index e59cda1..269fe58 100644 --- a/arch/x86_64/kernel/nmi.c +++ b/arch/x86_64/kernel/nmi.c @@ -368,6 +368,33 @@ void enable_timer_nmi_watchdog(void) } } +static void __acpi_nmi_disable(void *__unused) +{ + apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); +} + +/* + * Disable timer based NMIs on all CPUs: + */ +void acpi_nmi_disable(void) +{ + if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) + on_each_cpu(__acpi_nmi_disable, NULL, 0, 1); +} + +static void __acpi_nmi_enable(void *__unused) +{ + apic_write(APIC_LVT0, APIC_DM_NMI); +} + +/* + * Enable timer based NMIs on all CPUs: + */ +void acpi_nmi_enable(void) +{ + if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) + on_each_cpu(__acpi_nmi_enable, NULL, 0, 1); +} #ifdef CONFIG_PM static int nmi_pm_active; /* nmi_active before suspend */ diff --git a/drivers/acpi/namespace/nsinit.c b/drivers/acpi/namespace/nsinit.c index 326af8f..33db224 100644 --- a/drivers/acpi/namespace/nsinit.c +++ b/drivers/acpi/namespace/nsinit.c @@ -45,6 +45,7 @@ #include #include #include +#include #define _COMPONENT ACPI_NAMESPACE ACPI_MODULE_NAME("nsinit") @@ -534,7 +535,15 @@ acpi_ns_init_one_device(acpi_handle obj_handle, info->parameter_type = ACPI_PARAM_ARGS; info->flags = ACPI_IGNORE_RETURN_VALUE; + /* + * Some hardware relies on this being executed as atomically + * as possible (without an NMI being received in the middle of + * this) - so disable NMIs and initialize the device: + */ + acpi_nmi_disable(); status = acpi_ns_evaluate(info); + acpi_nmi_enable(); + if (ACPI_SUCCESS(status)) { walk_info->num_INI++; diff --git a/include/linux/nmi.h b/include/linux/nmi.h index acb4ed1..29af2d5 100644 --- a/include/linux/nmi.h +++ b/include/linux/nmi.h @@ -17,8 +17,15 @@ #ifdef ARCH_HAS_NMI_WATCHDOG #include extern void touch_nmi_watchdog(void); +extern void acpi_nmi_disable(void); +extern void acpi_nmi_enable(void); #else -# define touch_nmi_watchdog() touch_softlockup_watchdog() +static inline void touch_nmi_watchdog(void) +{ + touch_softlockup_watchdog(); +} +static inline void acpi_nmi_disable(void) { } +static inline void acpi_nmi_enable(void) { } #endif #ifndef trigger_all_cpu_backtrace -- cgit v0.10.2 From 30b82ea08c3365a6fc916250ff2ad634717fc81b Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Tue, 13 Feb 2007 13:26:24 +0100 Subject: [PATCH] i386: All Transmeta CPUs have constant TSCs All Transmeta CPUs ever produced have constant-rate TSCs. Signed-off-by: H. Peter Anvin Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton diff --git a/arch/i386/kernel/cpu/transmeta.c b/arch/i386/kernel/cpu/transmeta.c index 4056fb7..b536e81 100644 --- a/arch/i386/kernel/cpu/transmeta.c +++ b/arch/i386/kernel/cpu/transmeta.c @@ -72,6 +72,9 @@ static void __cpuinit init_transmeta(struct cpuinfo_x86 *c) wrmsr(0x80860004, ~0, uk); c->x86_capability[0] = cpuid_edx(0x00000001); wrmsr(0x80860004, cap_mask, uk); + + /* All Transmeta CPUs have a constant TSC */ + set_bit(X86_FEATURE_CONSTANT_TSC, c->x86_capability); /* If we can run i686 user-space code, call us an i686 */ #define USER686 (X86_FEATURE_TSC|X86_FEATURE_CX8|X86_FEATURE_CMOV) -- cgit v0.10.2 From 3101673b659b916c965271c7f7c9b99cb353c01c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 13 Feb 2007 13:26:24 +0100 Subject: [PATCH] i386: avoid gcc extension setcc() in math-emu is written as a gcc extension statement expression macro that returns a value. However, it's not used that way and it's not needed like that, so just make it a inline function so that we don't use an extension when it's not needed. Signed-off-by: Randy Dunlap Signed-off-by: Andi Kleen Cc: Andi Kleen Cc: Christoph Hellwig Cc: Segher Boessenkool Signed-off-by: Andrew Morton diff --git a/arch/i386/math-emu/status_w.h b/arch/i386/math-emu/status_w.h index 78d7b76..59e7330 100644 --- a/arch/i386/math-emu/status_w.h +++ b/arch/i386/math-emu/status_w.h @@ -48,9 +48,11 @@ #define status_word() \ ((partial_status & ~SW_Top & 0xffff) | ((top << SW_Top_Shift) & SW_Top)) -#define setcc(cc) ({ \ - partial_status &= ~(SW_C0|SW_C1|SW_C2|SW_C3); \ - partial_status |= (cc) & (SW_C0|SW_C1|SW_C2|SW_C3); }) +static inline void setcc(int cc) +{ + partial_status &= ~(SW_C0|SW_C1|SW_C2|SW_C3); + partial_status |= (cc) & (SW_C0|SW_C1|SW_C2|SW_C3); +} #ifdef PECULIAR_486 /* Default, this conveys no information, but an 80486 does it. */ -- cgit v0.10.2 From 2632f01a66d75f4ad59653a7efa506c6ea6845d0 Mon Sep 17 00:00:00 2001 From: takada Date: Tue, 13 Feb 2007 13:26:24 +0100 Subject: [PATCH] i386: support Classic MediaGXm I hope to support "classic" MediaGXm in kernel. The DIR1 register of MediaGXm( or Geode) shows the following values for identify CPU. For example, My MediaGXm shows 0x42. We can read National Semiconductor's datasheet without any NDAs. http://www.national.com/pf/GX/GXLV.html from datasheets: DIR1 0x30 - 0x33 GXm rev. 1.0 - 2.3 0x34 - 0x4f GXm rev. 2.4 - 3.x 0x5x GXm rev. 5.0 - 5.4 0x6x GXLV 0x7x (unknow) 0x8x Gx1 In nsc driver of X, accept 0x30 through 0x82. What will 0x7x mean? Cc: Jordan Crouse Cc: Andi Kleen Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Andi Kleen diff --git a/arch/i386/kernel/cpu/cyrix.c b/arch/i386/kernel/cpu/cyrix.c index c0c3b59..69b263f 100644 --- a/arch/i386/kernel/cpu/cyrix.c +++ b/arch/i386/kernel/cpu/cyrix.c @@ -285,10 +285,15 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) /* GXm supports extended cpuid levels 'ala' AMD */ if (c->cpuid_level == 2) { /* Enable cxMMX extensions (GX1 Datasheet 54) */ - setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1); + setCx86(CX86_CCR7, getCx86(CX86_CCR7) | 1); - /* GXlv/GXm/GX1 */ - if((dir1 >= 0x50 && dir1 <= 0x54) || dir1 >= 0x63) + /* + * GXm : 0x30 ... 0x5f GXm datasheet 51 + * GXlv: 0x6x GXlv datasheet 54 + * ? : 0x7x + * GX1 : 0x8x GX1 datasheet 56 + */ + if((0x30 <= dir1 && dir1 <= 0x6f) || (0x80 <=dir1 && dir1 <= 0x8f)) geode_configure(); get_model_name(c); /* get CPU marketing name */ return; -- cgit v0.10.2 From 47a55cd795656d11bb18a7885583361f02a6baa8 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 13 Feb 2007 13:26:24 +0100 Subject: [PATCH] i386: entry.S END/ENDPROC annotations Annotate i386/kernel/entry.S with END/ENDPROC to assist disassemblers and other analysis tools. Signed-off-by: Jan Beulich Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton diff --git a/arch/i386/kernel/entry.S b/arch/i386/kernel/entry.S index d4b4ffc..18bddcb 100644 --- a/arch/i386/kernel/entry.S +++ b/arch/i386/kernel/entry.S @@ -227,6 +227,7 @@ ENTRY(ret_from_fork) CFI_ADJUST_CFA_OFFSET -4 jmp syscall_exit CFI_ENDPROC +END(ret_from_fork) /* * Return to user mode is not as complex as all this looks, @@ -258,6 +259,7 @@ ENTRY(resume_userspace) # int/exception return? jne work_pending jmp restore_all +END(ret_from_exception) #ifdef CONFIG_PREEMPT ENTRY(resume_kernel) @@ -272,6 +274,7 @@ need_resched: jz restore_all call preempt_schedule_irq jmp need_resched +END(resume_kernel) #endif CFI_ENDPROC @@ -359,6 +362,7 @@ sysenter_past_esp: .align 4 .long 1b,2b .popsection +ENDPROC(sysenter_entry) # system call handler stub ENTRY(system_call) @@ -459,6 +463,7 @@ ldt_ss: CFI_ADJUST_CFA_OFFSET -8 jmp restore_nocheck CFI_ENDPROC +ENDPROC(system_call) # perform work that needs to be done immediately before resumption ALIGN @@ -504,6 +509,7 @@ work_notifysig_v86: xorl %edx, %edx call do_notify_resume jmp resume_userspace_sig +END(work_pending) # perform syscall exit tracing ALIGN @@ -519,6 +525,7 @@ syscall_trace_entry: cmpl $(nr_syscalls), %eax jnae syscall_call jmp syscall_exit +END(syscall_trace_entry) # perform syscall exit tracing ALIGN @@ -532,6 +539,7 @@ syscall_exit_work: movl $1, %edx call do_syscall_trace jmp resume_userspace +END(syscall_exit_work) CFI_ENDPROC RING0_INT_FRAME # can't unwind into user space anyway @@ -542,10 +550,12 @@ syscall_fault: GET_THREAD_INFO(%ebp) movl $-EFAULT,PT_EAX(%esp) jmp resume_userspace +END(syscall_fault) syscall_badsys: movl $-ENOSYS,PT_EAX(%esp) jmp resume_userspace +END(syscall_badsys) CFI_ENDPROC #define FIXUP_ESPFIX_STACK \ @@ -581,9 +591,9 @@ syscall_badsys: ENTRY(interrupt) .text -vector=0 ENTRY(irq_entries_start) RING0_INT_FRAME +vector=0 .rept NR_IRQS ALIGN .if vector @@ -592,11 +602,16 @@ ENTRY(irq_entries_start) 1: pushl $~(vector) CFI_ADJUST_CFA_OFFSET 4 jmp common_interrupt -.data + .previous .long 1b -.text + .text vector=vector+1 .endr +END(irq_entries_start) + +.previous +END(interrupt) +.previous /* * the CPU automatically disables interrupts when executing an IRQ vector, @@ -609,6 +624,7 @@ common_interrupt: movl %esp,%eax call do_IRQ jmp ret_from_intr +ENDPROC(common_interrupt) CFI_ENDPROC #define BUILD_INTERRUPT(name, nr) \ @@ -621,7 +637,8 @@ ENTRY(name) \ movl %esp,%eax; \ call smp_/**/name; \ jmp ret_from_intr; \ - CFI_ENDPROC + CFI_ENDPROC; \ +ENDPROC(name) /* The include is where all of the SMP etc. interrupts come from */ #include "entry_arch.h" @@ -697,6 +714,7 @@ ENTRY(coprocessor_error) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(coprocessor_error) ENTRY(simd_coprocessor_error) RING0_INT_FRAME @@ -706,6 +724,7 @@ ENTRY(simd_coprocessor_error) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(simd_coprocessor_error) ENTRY(device_not_available) RING0_INT_FRAME @@ -726,6 +745,7 @@ device_not_available_emulate: CFI_ADJUST_CFA_OFFSET -4 jmp ret_from_exception CFI_ENDPROC +END(device_not_available) /* * Debug traps and NMI can happen at the one SYSENTER instruction @@ -869,10 +889,12 @@ ENTRY(native_iret) .align 4 .long 1b,iret_exc .previous +END(native_iret) ENTRY(native_irq_enable_sysexit) sti sysexit +END(native_irq_enable_sysexit) #endif KPROBE_ENTRY(int3) @@ -895,6 +917,7 @@ ENTRY(overflow) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(overflow) ENTRY(bounds) RING0_INT_FRAME @@ -904,6 +927,7 @@ ENTRY(bounds) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(bounds) ENTRY(invalid_op) RING0_INT_FRAME @@ -913,6 +937,7 @@ ENTRY(invalid_op) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(invalid_op) ENTRY(coprocessor_segment_overrun) RING0_INT_FRAME @@ -922,6 +947,7 @@ ENTRY(coprocessor_segment_overrun) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(coprocessor_segment_overrun) ENTRY(invalid_TSS) RING0_EC_FRAME @@ -929,6 +955,7 @@ ENTRY(invalid_TSS) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(invalid_TSS) ENTRY(segment_not_present) RING0_EC_FRAME @@ -936,6 +963,7 @@ ENTRY(segment_not_present) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(segment_not_present) ENTRY(stack_segment) RING0_EC_FRAME @@ -943,6 +971,7 @@ ENTRY(stack_segment) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(stack_segment) KPROBE_ENTRY(general_protection) RING0_EC_FRAME @@ -958,6 +987,7 @@ ENTRY(alignment_check) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(alignment_check) ENTRY(divide_error) RING0_INT_FRAME @@ -967,6 +997,7 @@ ENTRY(divide_error) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(divide_error) #ifdef CONFIG_X86_MCE ENTRY(machine_check) @@ -977,6 +1008,7 @@ ENTRY(machine_check) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(machine_check) #endif ENTRY(spurious_interrupt_bug) @@ -987,6 +1019,7 @@ ENTRY(spurious_interrupt_bug) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(spurious_interrupt_bug) ENTRY(kernel_thread_helper) pushl $0 # fake return address for unwinder -- cgit v0.10.2 From f0a5a58aa812b31fd9f197c4ba48245942364eae Mon Sep 17 00:00:00 2001 From: Bob Picco Date: Tue, 13 Feb 2007 13:26:25 +0100 Subject: [PATCH] x86-64: clean up sparsemem memory_present call Eliminate arch specific memory_present call x86_64 NUMA by utilizing sparse_memory_present_with_active_regions. Acked-by: Mel Gorman Signed-off-by: Bob Picco Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c index d3f747d..41b8fb0 100644 --- a/arch/x86_64/mm/numa.c +++ b/arch/x86_64/mm/numa.c @@ -460,20 +460,6 @@ unsigned long __init numa_free_all_bootmem(void) return pages; } -#ifdef CONFIG_SPARSEMEM -static void __init arch_sparse_init(void) -{ - int i; - - for_each_online_node(i) - memory_present(i, node_start_pfn(i), node_end_pfn(i)); - - sparse_init(); -} -#else -#define arch_sparse_init() do {} while (0) -#endif - void __init paging_init(void) { int i; @@ -483,7 +469,8 @@ void __init paging_init(void) max_zone_pfns[ZONE_DMA32] = MAX_DMA32_PFN; max_zone_pfns[ZONE_NORMAL] = end_pfn; - arch_sparse_init(); + sparse_memory_present_with_active_regions(MAX_NUMNODES); + sparse_init(); for_each_online_node(i) { setup_node_zones(i); -- cgit v0.10.2 From a4af60aa64c828b7c047e7a67b2f896d4bfbd700 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Tue, 13 Feb 2007 13:26:25 +0100 Subject: [PATCH] i386: Remove unused kernel config option X86_XADD Remove the unused kernel config option X86_XADD, which is unused in any source or header file. Signed-off-by: Robert P. J. Day Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton diff --git a/arch/i386/Kconfig.cpu b/arch/i386/Kconfig.cpu index 2aecfba..b99c0e2 100644 --- a/arch/i386/Kconfig.cpu +++ b/arch/i386/Kconfig.cpu @@ -226,11 +226,6 @@ config X86_CMPXCHG depends on !M386 default y -config X86_XADD - bool - depends on !M386 - default y - config X86_L1_CACHE_SHIFT int default "7" if MPENTIUM4 || X86_GENERIC -- cgit v0.10.2 From ee4eff6ff6cbfc8ce38131058a18802bf6206879 Mon Sep 17 00:00:00 2001 From: Benjamin Romer Date: Tue, 13 Feb 2007 13:26:25 +0100 Subject: [PATCH] x86-64: update IO-APIC dest field to 8-bit for xAPIC On the Unisys ES7000/ONE system, we encountered a problem where performing a kexec reboot or dump on any cell other than cell 0 causes the system timer to stop working, resulting in a hang during timer calibration in the new kernel. We traced the problem to one line of code in disable_IO_APIC(), which needs to restore the timer's IO-APIC configuration before rebooting. The code is currently using the 4-bit physical destination field, rather than using the 8-bit logical destination field, and it cuts off the upper 4 bits of the timer's APIC ID. If we change this to use the logical destination field, the timer works and we can kexec on the upper cells. This was tested on two different cells (0 and 2) in an ES7000/ONE system. For reference, the relevant Intel xAPIC spec is kept at ftp://download.intel.com/design/chipsets/e8501/datashts/30962001.pdf, specifically on page 334. Signed-off-by: Benjamin M Romer Signed-off-by: Andi Kleen Cc: Andi Kleen Cc: "Eric W. Biederman" Cc: Vivek Goyal Signed-off-by: Andrew Morton diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index 6be6730..566e64d 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -831,7 +831,7 @@ static void __init setup_IO_APIC_irq(int apic, int pin, int idx, int irq) entry.delivery_mode = INT_DELIVERY_MODE; entry.dest_mode = INT_DEST_MODE; entry.mask = 0; /* enable IRQ */ - entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); + entry.dest = cpu_mask_to_apicid(TARGET_CPUS); entry.trigger = irq_trigger(idx); entry.polarity = irq_polarity(idx); @@ -839,7 +839,7 @@ static void __init setup_IO_APIC_irq(int apic, int pin, int idx, int irq) if (irq_trigger(idx)) { entry.trigger = 1; entry.mask = 1; - entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); + entry.dest = cpu_mask_to_apicid(TARGET_CPUS); } if (!apic && !IO_APIC_IRQ(irq)) @@ -851,7 +851,7 @@ static void __init setup_IO_APIC_irq(int apic, int pin, int idx, int irq) if (vector < 0) return; - entry.dest.logical.logical_dest = cpu_mask_to_apicid(mask); + entry.dest = cpu_mask_to_apicid(mask); entry.vector = vector; ioapic_register_intr(irq, vector, IOAPIC_AUTO); @@ -920,7 +920,7 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in */ entry.dest_mode = INT_DEST_MODE; entry.mask = 0; /* unmask IRQ now */ - entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); + entry.dest = cpu_mask_to_apicid(TARGET_CPUS); entry.delivery_mode = INT_DELIVERY_MODE; entry.polarity = 0; entry.trigger = 0; @@ -1020,18 +1020,17 @@ void __apicdebuginit print_IO_APIC(void) printk(KERN_DEBUG ".... IRQ redirection table:\n"); - printk(KERN_DEBUG " NR Log Phy Mask Trig IRR Pol" - " Stat Dest Deli Vect: \n"); + printk(KERN_DEBUG " NR Dst Mask Trig IRR Pol" + " Stat Dmod Deli Vect: \n"); for (i = 0; i <= reg_01.bits.entries; i++) { struct IO_APIC_route_entry entry; entry = ioapic_read_entry(apic, i); - printk(KERN_DEBUG " %02x %03X %02X ", + printk(KERN_DEBUG " %02x %03X ", i, - entry.dest.logical.logical_dest, - entry.dest.physical.physical_dest + entry.dest ); printk("%1d %1d %1d %1d %1d %1d %1d %02X\n", @@ -1293,8 +1292,7 @@ void disable_IO_APIC(void) entry.dest_mode = 0; /* Physical */ entry.delivery_mode = dest_ExtINT; /* ExtInt */ entry.vector = 0; - entry.dest.physical.physical_dest = - GET_APIC_ID(apic_read(APIC_ID)); + entry.dest = GET_APIC_ID(apic_read(APIC_ID)); /* * Add it to the IO-APIC irq-routing table: @@ -1556,7 +1554,7 @@ static inline void unlock_ExtINT_logic(void) entry1.dest_mode = 0; /* physical delivery */ entry1.mask = 0; /* unmask IRQ now */ - entry1.dest.physical.physical_dest = hard_smp_processor_id(); + entry1.dest = hard_smp_processor_id(); entry1.delivery_mode = dest_ExtINT; entry1.polarity = entry0.polarity; entry1.trigger = 0; @@ -2131,7 +2129,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int p entry.delivery_mode = INT_DELIVERY_MODE; entry.dest_mode = INT_DEST_MODE; - entry.dest.logical.logical_dest = cpu_mask_to_apicid(mask); + entry.dest = cpu_mask_to_apicid(mask); entry.trigger = triggering; entry.polarity = polarity; entry.mask = 1; /* Disabled (masked) */ diff --git a/include/asm-x86_64/io_apic.h b/include/asm-x86_64/io_apic.h index 561ecbf..f4fb238 100644 --- a/include/asm-x86_64/io_apic.h +++ b/include/asm-x86_64/io_apic.h @@ -85,18 +85,8 @@ struct IO_APIC_route_entry { mask : 1, /* 0: enabled, 1: disabled */ __reserved_2 : 15; - union { struct { __u32 - __reserved_1 : 24, - physical_dest : 4, - __reserved_2 : 4; - } physical; - - struct { __u32 - __reserved_1 : 24, - logical_dest : 8; - } logical; - } dest; - + __u32 __reserved_3 : 24, + dest : 8; } __attribute__ ((packed)); /* -- cgit v0.10.2 From 3e94fb8f54c5305ed472e0867cd67d53e05bfb64 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 13 Feb 2007 13:26:25 +0100 Subject: [PATCH] x86-64: avoid warning message livelock I've seen my box paralyzed by an endless spew of rtc: lost some interrupts at 1024Hz. messages on the serial console. What seems to be happening is that something real causes an interrupt to be lost and triggers the message. But then printing the message to the serial console (from the hpet interrupt handler) takes more than 1/1024th of a second, and then some more interrupts are lost, so the message triggers again.... Fix this by adding a printk_ratelimit() before printing the warning. Signed-off-by: Roland Dreier Signed-off-by: Andrew Morton Signed-off-by: Andi Kleen diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index 9c7fba3..3cc6886 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -1226,8 +1226,9 @@ static void hpet_rtc_timer_reinit(void) if (PIE_on) PIE_count += lost_ints; - printk(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n", - hpet_rtc_int_freq); + if (printk_ratelimit()) + printk(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n", + hpet_rtc_int_freq); } } -- cgit v0.10.2 From 8469adde5932f2879688fd5f183a6e9dadbf7b9f Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Tue, 13 Feb 2007 13:26:25 +0100 Subject: [PATCH] x86-64: Minor patch for compilation warning in x86_64 signal code If DEBUG_SIG is enbaled in source code, ia32_signal.c compiles with warning due to wrong format string. Attached patch fixes that. It is quite minor update, since by default DEBUG_SIG is not enabled and can not be turned on without code modification. Signed-off-by: Evgeniy Polyakov Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton diff --git a/arch/x86_64/ia32/ia32_signal.c b/arch/x86_64/ia32/ia32_signal.c index ff499ef..490f7c1 100644 --- a/arch/x86_64/ia32/ia32_signal.c +++ b/arch/x86_64/ia32/ia32_signal.c @@ -495,7 +495,7 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka, ptrace_notify(SIGTRAP); #if DEBUG_SIG - printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n", + printk("SIG deliver (%s:%d): sp=%p pc=%lx ra=%u\n", current->comm, current->pid, frame, regs->rip, frame->pretcode); #endif @@ -601,7 +601,7 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, ptrace_notify(SIGTRAP); #if DEBUG_SIG - printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n", + printk("SIG deliver (%s:%d): sp=%p pc=%lx ra=%u\n", current->comm, current->pid, frame, regs->rip, frame->pretcode); #endif -- cgit v0.10.2 From 86c418374223be3f328b5522545196db02c8ceda Mon Sep 17 00:00:00 2001 From: Chuck Ebbert Date: Tue, 13 Feb 2007 13:26:25 +0100 Subject: [PATCH] i386: add option to show more code in oops reports Sometimes developers need to see more object code in an oops report, e.g. when kernel may be corrupted at runtime. Add the "code_bytes" option for this. Signed-off-by: Chuck Ebbert Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 733a736..22b1996 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -364,6 +364,11 @@ and is between 256 and 4096 characters. It is defined in the file clocksource is not available, it defaults to PIT. Format: { pit | tsc | cyclone | pmtmr } + code_bytes [IA32] How many bytes of object code to print in an + oops report. + Range: 0 - 8192 + Default: 64 + disable_8254_timer enable_8254_timer [IA32/X86_64] Disable/Enable interrupt 0 timer routing diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c index 4ec2103..af0d3f7 100644 --- a/arch/i386/kernel/traps.c +++ b/arch/i386/kernel/traps.c @@ -94,6 +94,7 @@ asmlinkage void spurious_interrupt_bug(void); asmlinkage void machine_check(void); int kstack_depth_to_print = 24; +static unsigned int code_bytes = 64; ATOMIC_NOTIFIER_HEAD(i386die_chain); int register_die_notifier(struct notifier_block *nb) @@ -325,7 +326,8 @@ void show_registers(struct pt_regs *regs) */ if (in_kernel) { u8 *eip; - int code_bytes = 64; + unsigned int code_prologue = code_bytes * 43 / 64; + unsigned int code_len = code_bytes; unsigned char c; printk("\n" KERN_EMERG "Stack: "); @@ -333,14 +335,14 @@ void show_registers(struct pt_regs *regs) printk(KERN_EMERG "Code: "); - eip = (u8 *)regs->eip - 43; + eip = (u8 *)regs->eip - code_prologue; if (eip < (u8 *)PAGE_OFFSET || probe_kernel_address(eip, c)) { /* try starting at EIP */ eip = (u8 *)regs->eip; - code_bytes = 32; + code_len = code_len - code_prologue + 1; } - for (i = 0; i < code_bytes; i++, eip++) { + for (i = 0; i < code_len; i++, eip++) { if (eip < (u8 *)PAGE_OFFSET || probe_kernel_address(eip, c)) { printk(" Bad EIP value."); @@ -1192,3 +1194,13 @@ static int __init kstack_setup(char *s) return 1; } __setup("kstack=", kstack_setup); + +static int __init code_bytes_setup(char *s) +{ + code_bytes = simple_strtoul(s, NULL, 0); + if (code_bytes > 8192) + code_bytes = 8192; + + return 1; +} +__setup("code_bytes=", code_bytes_setup); -- cgit v0.10.2 From bcde1ebb81c51ebdfa02887703e4d21c1bbc2431 Mon Sep 17 00:00:00 2001 From: TAKADA Yoshihito Date: Tue, 13 Feb 2007 13:26:25 +0100 Subject: [PATCH] i386: geode configuration fixes Original code doesn't write back to CCR4 register. This patch reflects a value of a register. Cc: Jordan Crouse Acked-by: Alan Cox Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Andi Kleen diff --git a/arch/i386/kernel/cpu/cyrix.c b/arch/i386/kernel/cpu/cyrix.c index 69b263f..408a74e 100644 --- a/arch/i386/kernel/cpu/cyrix.c +++ b/arch/i386/kernel/cpu/cyrix.c @@ -161,19 +161,19 @@ static void __cpuinit set_cx86_inc(void) static void __cpuinit geode_configure(void) { unsigned long flags; - u8 ccr3, ccr4; + u8 ccr3; local_irq_save(flags); /* Suspend on halt power saving and enable #SUSP pin */ setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88); ccr3 = getCx86(CX86_CCR3); - setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* Enable */ - - ccr4 = getCx86(CX86_CCR4); - ccr4 |= 0x38; /* FPU fast, DTE cache, Mem bypass */ + setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ - setCx86(CX86_CCR3, ccr3); + + /* FPU fast, DTE cache, Mem bypass */ + setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x38); + setCx86(CX86_CCR3, ccr3); /* disable MAPEN */ set_cx86_memwb(); set_cx86_reorder(); @@ -420,15 +420,14 @@ static void __cpuinit cyrix_identify(struct cpuinfo_x86 * c) if (dir0 == 5 || dir0 == 3) { - unsigned char ccr3, ccr4; + unsigned char ccr3; unsigned long flags; printk(KERN_INFO "Enabling CPUID on Cyrix processor.\n"); local_irq_save(flags); ccr3 = getCx86(CX86_CCR3); - setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ - ccr4 = getCx86(CX86_CCR4); - setCx86(CX86_CCR4, ccr4 | 0x80); /* enable cpuid */ - setCx86(CX86_CCR3, ccr3); /* disable MAPEN */ + setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ + setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x80); /* enable cpuid */ + setCx86(CX86_CCR3, ccr3); /* disable MAPEN */ local_irq_restore(flags); } } -- cgit v0.10.2 From 2fb12a9bca5ad9aa6dcd2c639b4a7656a8843ef8 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Tue, 13 Feb 2007 13:26:25 +0100 Subject: [PATCH] x86-64: survive having no irq mapping for a vector Occasionally the kernel has bugs that result in no irq being found for a given cpu vector. If we acknowledge the irq the system has a good chance of continuing even though we dropped an irq message. If we continue to simply print a message and not acknowledge the irq the system is likely to become non-responsive shortly there after. AK: Fixed compilation for UP kernels Signed-off-by: Eric W. Biederman Signed-off-by: Andi Kleen Cc: "Luigi Genoni" Cc: Andi Kleen Signed-off-by: Andrew Morton diff --git a/arch/x86_64/kernel/irq.c b/arch/x86_64/kernel/irq.c index 0c06af6..3bc30d2 100644 --- a/arch/x86_64/kernel/irq.c +++ b/arch/x86_64/kernel/irq.c @@ -18,6 +18,7 @@ #include #include #include +#include atomic_t irq_err_count; @@ -120,9 +121,14 @@ asmlinkage unsigned int do_IRQ(struct pt_regs *regs) if (likely(irq < NR_IRQS)) generic_handle_irq(irq); - else if (printk_ratelimit()) - printk(KERN_EMERG "%s: %d.%d No irq handler for vector\n", - __func__, smp_processor_id(), vector); + else { + if (!disable_apic) + ack_APIC_irq(); + + if (printk_ratelimit()) + printk(KERN_EMERG "%s: %d.%d No irq handler for vector\n", + __func__, smp_processor_id(), vector); + } irq_exit(); -- cgit v0.10.2 From 9f6026b8c308365d955faaf31dd0f457266d11f8 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:25 +0100 Subject: [PATCH] x86-64: Fix wrong gcc check in bitops.h gcc 5.0 will likely not have the constraint problem Signed-off-by: Andi Kleen diff --git a/include/asm-x86_64/bitops.h b/include/asm-x86_64/bitops.h index 8da9609..d4dbbe5 100644 --- a/include/asm-x86_64/bitops.h +++ b/include/asm-x86_64/bitops.h @@ -7,7 +7,7 @@ #include -#if __GNUC__ < 4 || __GNUC_MINOR__ < 1 +#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 1) /* Technically wrong, but this avoids compilation errors on some gcc versions. */ #define ADDR "=m" (*(volatile long *) addr) -- cgit v0.10.2 From 1a1eecd1c272f704f135a7d8060ec3da1c201b4c Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:25 +0100 Subject: [PATCH] i386: Remove fastcall in paravirt.[ch] Not needed because fastcall is always default now Signed-off-by: Andi Kleen diff --git a/arch/i386/kernel/paravirt.c b/arch/i386/kernel/paravirt.c index 2003733..ebe8255 100644 --- a/arch/i386/kernel/paravirt.c +++ b/arch/i386/kernel/paravirt.c @@ -92,7 +92,7 @@ static unsigned native_patch(u8 type, u16 clobbers, void *insns, unsigned len) return insn_len; } -static fastcall unsigned long native_get_debugreg(int regno) +static unsigned long native_get_debugreg(int regno) { unsigned long val = 0; /* Damn you, gcc! */ @@ -115,7 +115,7 @@ static fastcall unsigned long native_get_debugreg(int regno) return val; } -static fastcall void native_set_debugreg(int regno, unsigned long value) +static void native_set_debugreg(int regno, unsigned long value) { switch (regno) { case 0: @@ -146,55 +146,55 @@ void init_IRQ(void) paravirt_ops.init_IRQ(); } -static fastcall void native_clts(void) +static void native_clts(void) { asm volatile ("clts"); } -static fastcall unsigned long native_read_cr0(void) +static unsigned long native_read_cr0(void) { unsigned long val; asm volatile("movl %%cr0,%0\n\t" :"=r" (val)); return val; } -static fastcall void native_write_cr0(unsigned long val) +static void native_write_cr0(unsigned long val) { asm volatile("movl %0,%%cr0": :"r" (val)); } -static fastcall unsigned long native_read_cr2(void) +static unsigned long native_read_cr2(void) { unsigned long val; asm volatile("movl %%cr2,%0\n\t" :"=r" (val)); return val; } -static fastcall void native_write_cr2(unsigned long val) +static void native_write_cr2(unsigned long val) { asm volatile("movl %0,%%cr2": :"r" (val)); } -static fastcall unsigned long native_read_cr3(void) +static unsigned long native_read_cr3(void) { unsigned long val; asm volatile("movl %%cr3,%0\n\t" :"=r" (val)); return val; } -static fastcall void native_write_cr3(unsigned long val) +static void native_write_cr3(unsigned long val) { asm volatile("movl %0,%%cr3": :"r" (val)); } -static fastcall unsigned long native_read_cr4(void) +static unsigned long native_read_cr4(void) { unsigned long val; asm volatile("movl %%cr4,%0\n\t" :"=r" (val)); return val; } -static fastcall unsigned long native_read_cr4_safe(void) +static unsigned long native_read_cr4_safe(void) { unsigned long val; /* This could fault if %cr4 does not exist */ @@ -207,51 +207,51 @@ static fastcall unsigned long native_read_cr4_safe(void) return val; } -static fastcall void native_write_cr4(unsigned long val) +static void native_write_cr4(unsigned long val) { asm volatile("movl %0,%%cr4": :"r" (val)); } -static fastcall unsigned long native_save_fl(void) +static unsigned long native_save_fl(void) { unsigned long f; asm volatile("pushfl ; popl %0":"=g" (f): /* no input */); return f; } -static fastcall void native_restore_fl(unsigned long f) +static void native_restore_fl(unsigned long f) { asm volatile("pushl %0 ; popfl": /* no output */ :"g" (f) :"memory", "cc"); } -static fastcall void native_irq_disable(void) +static void native_irq_disable(void) { asm volatile("cli": : :"memory"); } -static fastcall void native_irq_enable(void) +static void native_irq_enable(void) { asm volatile("sti": : :"memory"); } -static fastcall void native_safe_halt(void) +static void native_safe_halt(void) { asm volatile("sti; hlt": : :"memory"); } -static fastcall void native_halt(void) +static void native_halt(void) { asm volatile("hlt": : :"memory"); } -static fastcall void native_wbinvd(void) +static void native_wbinvd(void) { asm volatile("wbinvd": : :"memory"); } -static fastcall unsigned long long native_read_msr(unsigned int msr, int *err) +static unsigned long long native_read_msr(unsigned int msr, int *err) { unsigned long long val; @@ -270,7 +270,7 @@ static fastcall unsigned long long native_read_msr(unsigned int msr, int *err) return val; } -static fastcall int native_write_msr(unsigned int msr, unsigned long long val) +static int native_write_msr(unsigned int msr, unsigned long long val) { int err; asm volatile("2: wrmsr ; xorl %0,%0\n" @@ -288,53 +288,53 @@ static fastcall int native_write_msr(unsigned int msr, unsigned long long val) return err; } -static fastcall unsigned long long native_read_tsc(void) +static unsigned long long native_read_tsc(void) { unsigned long long val; asm volatile("rdtsc" : "=A" (val)); return val; } -static fastcall unsigned long long native_read_pmc(void) +static unsigned long long native_read_pmc(void) { unsigned long long val; asm volatile("rdpmc" : "=A" (val)); return val; } -static fastcall void native_load_tr_desc(void) +static void native_load_tr_desc(void) { asm volatile("ltr %w0"::"q" (GDT_ENTRY_TSS*8)); } -static fastcall void native_load_gdt(const struct Xgt_desc_struct *dtr) +static void native_load_gdt(const struct Xgt_desc_struct *dtr) { asm volatile("lgdt %0"::"m" (*dtr)); } -static fastcall void native_load_idt(const struct Xgt_desc_struct *dtr) +static void native_load_idt(const struct Xgt_desc_struct *dtr) { asm volatile("lidt %0"::"m" (*dtr)); } -static fastcall void native_store_gdt(struct Xgt_desc_struct *dtr) +static void native_store_gdt(struct Xgt_desc_struct *dtr) { asm ("sgdt %0":"=m" (*dtr)); } -static fastcall void native_store_idt(struct Xgt_desc_struct *dtr) +static void native_store_idt(struct Xgt_desc_struct *dtr) { asm ("sidt %0":"=m" (*dtr)); } -static fastcall unsigned long native_store_tr(void) +static unsigned long native_store_tr(void) { unsigned long tr; asm ("str %0":"=r" (tr)); return tr; } -static fastcall void native_load_tls(struct thread_struct *t, unsigned int cpu) +static void native_load_tls(struct thread_struct *t, unsigned int cpu) { #define C(i) get_cpu_gdt_table(cpu)[GDT_ENTRY_TLS_MIN + i] = t->tls_array[i] C(0); C(1); C(2); @@ -348,22 +348,22 @@ static inline void native_write_dt_entry(void *dt, int entry, u32 entry_low, u32 lp[1] = entry_high; } -static fastcall void native_write_ldt_entry(void *dt, int entrynum, u32 low, u32 high) +static void native_write_ldt_entry(void *dt, int entrynum, u32 low, u32 high) { native_write_dt_entry(dt, entrynum, low, high); } -static fastcall void native_write_gdt_entry(void *dt, int entrynum, u32 low, u32 high) +static void native_write_gdt_entry(void *dt, int entrynum, u32 low, u32 high) { native_write_dt_entry(dt, entrynum, low, high); } -static fastcall void native_write_idt_entry(void *dt, int entrynum, u32 low, u32 high) +static void native_write_idt_entry(void *dt, int entrynum, u32 low, u32 high) { native_write_dt_entry(dt, entrynum, low, high); } -static fastcall void native_load_esp0(struct tss_struct *tss, +static void native_load_esp0(struct tss_struct *tss, struct thread_struct *thread) { tss->esp0 = thread->esp0; @@ -375,12 +375,12 @@ static fastcall void native_load_esp0(struct tss_struct *tss, } } -static fastcall void native_io_delay(void) +static void native_io_delay(void) { asm volatile("outb %al,$0x80"); } -static fastcall void native_flush_tlb(void) +static void native_flush_tlb(void) { __native_flush_tlb(); } @@ -389,49 +389,49 @@ static fastcall void native_flush_tlb(void) * Global pages have to be flushed a bit differently. Not a real * performance problem because this does not happen often. */ -static fastcall void native_flush_tlb_global(void) +static void native_flush_tlb_global(void) { __native_flush_tlb_global(); } -static fastcall void native_flush_tlb_single(u32 addr) +static void native_flush_tlb_single(u32 addr) { __native_flush_tlb_single(addr); } #ifndef CONFIG_X86_PAE -static fastcall void native_set_pte(pte_t *ptep, pte_t pteval) +static void native_set_pte(pte_t *ptep, pte_t pteval) { *ptep = pteval; } -static fastcall void native_set_pte_at(struct mm_struct *mm, u32 addr, pte_t *ptep, pte_t pteval) +static void native_set_pte_at(struct mm_struct *mm, u32 addr, pte_t *ptep, pte_t pteval) { *ptep = pteval; } -static fastcall void native_set_pmd(pmd_t *pmdp, pmd_t pmdval) +static void native_set_pmd(pmd_t *pmdp, pmd_t pmdval) { *pmdp = pmdval; } #else /* CONFIG_X86_PAE */ -static fastcall void native_set_pte(pte_t *ptep, pte_t pte) +static void native_set_pte(pte_t *ptep, pte_t pte) { ptep->pte_high = pte.pte_high; smp_wmb(); ptep->pte_low = pte.pte_low; } -static fastcall void native_set_pte_at(struct mm_struct *mm, u32 addr, pte_t *ptep, pte_t pte) +static void native_set_pte_at(struct mm_struct *mm, u32 addr, pte_t *ptep, pte_t pte) { ptep->pte_high = pte.pte_high; smp_wmb(); ptep->pte_low = pte.pte_low; } -static fastcall void native_set_pte_present(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte) +static void native_set_pte_present(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte) { ptep->pte_low = 0; smp_wmb(); @@ -440,29 +440,29 @@ static fastcall void native_set_pte_present(struct mm_struct *mm, unsigned long ptep->pte_low = pte.pte_low; } -static fastcall void native_set_pte_atomic(pte_t *ptep, pte_t pteval) +static void native_set_pte_atomic(pte_t *ptep, pte_t pteval) { set_64bit((unsigned long long *)ptep,pte_val(pteval)); } -static fastcall void native_set_pmd(pmd_t *pmdp, pmd_t pmdval) +static void native_set_pmd(pmd_t *pmdp, pmd_t pmdval) { set_64bit((unsigned long long *)pmdp,pmd_val(pmdval)); } -static fastcall void native_set_pud(pud_t *pudp, pud_t pudval) +static void native_set_pud(pud_t *pudp, pud_t pudval) { *pudp = pudval; } -static fastcall void native_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +static void native_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { ptep->pte_low = 0; smp_wmb(); ptep->pte_high = 0; } -static fastcall void native_pmd_clear(pmd_t *pmd) +static void native_pmd_clear(pmd_t *pmd) { u32 *tmp = (u32 *)pmd; *tmp = 0; @@ -472,8 +472,8 @@ static fastcall void native_pmd_clear(pmd_t *pmd) #endif /* CONFIG_X86_PAE */ /* These are in entry.S */ -extern fastcall void native_iret(void); -extern fastcall void native_irq_enable_sysexit(void); +extern void native_iret(void); +extern void native_irq_enable_sysexit(void); static int __init print_banner(void) { diff --git a/include/asm-i386/paravirt.h b/include/asm-i386/paravirt.h index 12ef959..6317e0a 100644 --- a/include/asm-i386/paravirt.h +++ b/include/asm-i386/paravirt.h @@ -59,102 +59,102 @@ struct paravirt_ops convention. This makes it easier to implement inline assembler replacements. */ - void (fastcall *cpuid)(unsigned int *eax, unsigned int *ebx, + void (*cpuid)(unsigned int *eax, unsigned int *ebx, unsigned int *ecx, unsigned int *edx); - unsigned long (fastcall *get_debugreg)(int regno); - void (fastcall *set_debugreg)(int regno, unsigned long value); + unsigned long (*get_debugreg)(int regno); + void (*set_debugreg)(int regno, unsigned long value); - void (fastcall *clts)(void); + void (*clts)(void); - unsigned long (fastcall *read_cr0)(void); - void (fastcall *write_cr0)(unsigned long); + unsigned long (*read_cr0)(void); + void (*write_cr0)(unsigned long); - unsigned long (fastcall *read_cr2)(void); - void (fastcall *write_cr2)(unsigned long); + unsigned long (*read_cr2)(void); + void (*write_cr2)(unsigned long); - unsigned long (fastcall *read_cr3)(void); - void (fastcall *write_cr3)(unsigned long); + unsigned long (*read_cr3)(void); + void (*write_cr3)(unsigned long); - unsigned long (fastcall *read_cr4_safe)(void); - unsigned long (fastcall *read_cr4)(void); - void (fastcall *write_cr4)(unsigned long); + unsigned long (*read_cr4_safe)(void); + unsigned long (*read_cr4)(void); + void (*write_cr4)(unsigned long); - unsigned long (fastcall *save_fl)(void); - void (fastcall *restore_fl)(unsigned long); - void (fastcall *irq_disable)(void); - void (fastcall *irq_enable)(void); - void (fastcall *safe_halt)(void); - void (fastcall *halt)(void); - void (fastcall *wbinvd)(void); + unsigned long (*save_fl)(void); + void (*restore_fl)(unsigned long); + void (*irq_disable)(void); + void (*irq_enable)(void); + void (*safe_halt)(void); + void (*halt)(void); + void (*wbinvd)(void); /* err = 0/-EFAULT. wrmsr returns 0/-EFAULT. */ - u64 (fastcall *read_msr)(unsigned int msr, int *err); - int (fastcall *write_msr)(unsigned int msr, u64 val); - - u64 (fastcall *read_tsc)(void); - u64 (fastcall *read_pmc)(void); - - void (fastcall *load_tr_desc)(void); - void (fastcall *load_gdt)(const struct Xgt_desc_struct *); - void (fastcall *load_idt)(const struct Xgt_desc_struct *); - void (fastcall *store_gdt)(struct Xgt_desc_struct *); - void (fastcall *store_idt)(struct Xgt_desc_struct *); - void (fastcall *set_ldt)(const void *desc, unsigned entries); - unsigned long (fastcall *store_tr)(void); - void (fastcall *load_tls)(struct thread_struct *t, unsigned int cpu); - void (fastcall *write_ldt_entry)(void *dt, int entrynum, + u64 (*read_msr)(unsigned int msr, int *err); + int (*write_msr)(unsigned int msr, u64 val); + + u64 (*read_tsc)(void); + u64 (*read_pmc)(void); + + void (*load_tr_desc)(void); + void (*load_gdt)(const struct Xgt_desc_struct *); + void (*load_idt)(const struct Xgt_desc_struct *); + void (*store_gdt)(struct Xgt_desc_struct *); + void (*store_idt)(struct Xgt_desc_struct *); + void (*set_ldt)(const void *desc, unsigned entries); + unsigned long (*store_tr)(void); + void (*load_tls)(struct thread_struct *t, unsigned int cpu); + void (*write_ldt_entry)(void *dt, int entrynum, u32 low, u32 high); - void (fastcall *write_gdt_entry)(void *dt, int entrynum, + void (*write_gdt_entry)(void *dt, int entrynum, u32 low, u32 high); - void (fastcall *write_idt_entry)(void *dt, int entrynum, + void (*write_idt_entry)(void *dt, int entrynum, u32 low, u32 high); - void (fastcall *load_esp0)(struct tss_struct *tss, + void (*load_esp0)(struct tss_struct *tss, struct thread_struct *thread); - void (fastcall *set_iopl_mask)(unsigned mask); + void (*set_iopl_mask)(unsigned mask); - void (fastcall *io_delay)(void); + void (*io_delay)(void); void (*const_udelay)(unsigned long loops); #ifdef CONFIG_X86_LOCAL_APIC - void (fastcall *apic_write)(unsigned long reg, unsigned long v); - void (fastcall *apic_write_atomic)(unsigned long reg, unsigned long v); - unsigned long (fastcall *apic_read)(unsigned long reg); + void (*apic_write)(unsigned long reg, unsigned long v); + void (*apic_write_atomic)(unsigned long reg, unsigned long v); + unsigned long (*apic_read)(unsigned long reg); void (*setup_boot_clock)(void); void (*setup_secondary_clock)(void); #endif - void (fastcall *flush_tlb_user)(void); - void (fastcall *flush_tlb_kernel)(void); - void (fastcall *flush_tlb_single)(u32 addr); - - void (fastcall *alloc_pt)(u32 pfn); - void (fastcall *alloc_pd)(u32 pfn); - void (fastcall *alloc_pd_clone)(u32 pfn, u32 clonepfn, u32 start, u32 count); - void (fastcall *release_pt)(u32 pfn); - void (fastcall *release_pd)(u32 pfn); - - void (fastcall *set_pte)(pte_t *ptep, pte_t pteval); - void (fastcall *set_pte_at)(struct mm_struct *mm, u32 addr, pte_t *ptep, pte_t pteval); - void (fastcall *set_pmd)(pmd_t *pmdp, pmd_t pmdval); - void (fastcall *pte_update)(struct mm_struct *mm, u32 addr, pte_t *ptep); - void (fastcall *pte_update_defer)(struct mm_struct *mm, u32 addr, pte_t *ptep); + void (*flush_tlb_user)(void); + void (*flush_tlb_kernel)(void); + void (*flush_tlb_single)(u32 addr); + + void (*alloc_pt)(u32 pfn); + void (*alloc_pd)(u32 pfn); + void (*alloc_pd_clone)(u32 pfn, u32 clonepfn, u32 start, u32 count); + void (*release_pt)(u32 pfn); + void (*release_pd)(u32 pfn); + + void (*set_pte)(pte_t *ptep, pte_t pteval); + void (*set_pte_at)(struct mm_struct *mm, u32 addr, pte_t *ptep, pte_t pteval); + void (*set_pmd)(pmd_t *pmdp, pmd_t pmdval); + void (*pte_update)(struct mm_struct *mm, u32 addr, pte_t *ptep); + void (*pte_update_defer)(struct mm_struct *mm, u32 addr, pte_t *ptep); #ifdef CONFIG_X86_PAE - void (fastcall *set_pte_atomic)(pte_t *ptep, pte_t pteval); - void (fastcall *set_pte_present)(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte); - void (fastcall *set_pud)(pud_t *pudp, pud_t pudval); - void (fastcall *pte_clear)(struct mm_struct *mm, unsigned long addr, pte_t *ptep); - void (fastcall *pmd_clear)(pmd_t *pmdp); + void (*set_pte_atomic)(pte_t *ptep, pte_t pteval); + void (*set_pte_present)(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte); + void (*set_pud)(pud_t *pudp, pud_t pudval); + void (*pte_clear)(struct mm_struct *mm, unsigned long addr, pte_t *ptep); + void (*pmd_clear)(pmd_t *pmdp); #endif - void (fastcall *set_lazy_mode)(int mode); + void (*set_lazy_mode)(int mode); /* These two are jmp to, not actually called. */ - void (fastcall *irq_enable_sysexit)(void); - void (fastcall *iret)(void); + void (*irq_enable_sysexit)(void); + void (*iret)(void); - void (fastcall *startup_ipi_hook)(int phys_apicid, unsigned long start_eip, unsigned long start_esp); + void (*startup_ipi_hook)(int phys_apicid, unsigned long start_eip, unsigned long start_esp); }; /* Mark a paravirt probe function. */ -- cgit v0.10.2 From f790cd30d002949a12623b2a8cec4d4e5a8887ef Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:25 +0100 Subject: [PATCH] x86: Add new CPUID bits for AMD Family 10 CPUs in /proc/cpuinfo Just various new acronyms. The new popcnt bit is in the middle of Intel space. This looks a little weird, but I've been assured it's ok. Also I fixed RDTSCP for i386 which was at the wrong place. For i386 and x86-64. Signed-off-by: Andi Kleen diff --git a/arch/i386/kernel/cpu/proc.c b/arch/i386/kernel/cpu/proc.c index 6624d85..47e3ebb 100644 --- a/arch/i386/kernel/cpu/proc.c +++ b/arch/i386/kernel/cpu/proc.c @@ -29,7 +29,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL, NULL, NULL, NULL, "mp", "nx", NULL, "mmxext", NULL, - NULL, "fxsr_opt", "rdtscp", NULL, NULL, "lm", "3dnowext", "3dnow", + NULL, "fxsr_opt", "pdpe1gb", "rdtscp", NULL, "lm", "3dnowext", "3dnow", /* Transmeta-defined */ "recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL, @@ -47,7 +47,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) /* Intel-defined (#2) */ "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est", "tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL, - NULL, NULL, "dca", NULL, NULL, NULL, NULL, NULL, + NULL, NULL, "dca", NULL, NULL, NULL, NULL, "popcnt", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* VIA/Cyrix/Centaur-defined */ @@ -57,8 +57,9 @@ static int show_cpuinfo(struct seq_file *m, void *v) NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* AMD-defined (#2) */ - "lahf_lm", "cmp_legacy", "svm", NULL, "cr8legacy", NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + "lahf_lm", "cmp_legacy", "svm", "extapic", "cr8legacy", "abm", + "sse4a", "misalignsse", + "3dnowprefetch", "osvw", "ibs", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, }; @@ -69,8 +70,11 @@ static int show_cpuinfo(struct seq_file *m, void *v) "ttp", /* thermal trip */ "tm", "stc", + "100mhzsteps", + "hwpstate", NULL, - /* nothing */ /* constant_tsc - moved to flags */ + NULL, /* constant_tsc - moved to flags */ + /* nothing */ }; struct cpuinfo_x86 *c = v; int i, n = c - cpu_data; diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index e82c1a1..13daaf3 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -942,7 +942,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, "nx", NULL, "mmxext", NULL, - NULL, "fxsr_opt", NULL, "rdtscp", NULL, "lm", "3dnowext", "3dnow", + NULL, "fxsr_opt", "pdpe1gb", "rdtscp", NULL, "lm", + "3dnowext", "3dnow", /* Transmeta-defined */ "recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL, @@ -960,7 +961,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) /* Intel-defined (#2) */ "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est", "tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL, - NULL, NULL, "dca", NULL, NULL, NULL, NULL, NULL, + NULL, NULL, "dca", NULL, NULL, NULL, NULL, "popcnt", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* VIA/Cyrix/Centaur-defined */ @@ -970,8 +971,10 @@ static int show_cpuinfo(struct seq_file *m, void *v) NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* AMD-defined (#2) */ - "lahf_lm", "cmp_legacy", "svm", NULL, "cr8_legacy", NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + "lahf_lm", "cmp_legacy", "svm", "extapic", "cr8_legacy", + "altmovcr8", "abm", "sse4a", + "misalignsse", "3dnowprefetch", + "osvw", "ibs", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, }; @@ -982,6 +985,9 @@ static int show_cpuinfo(struct seq_file *m, void *v) "ttp", /* thermal trip */ "tm", "stc", + "100mhzsteps", + "hwpstate", + NULL, /* tsc invariant mapped to constant_tsc */ NULL, /* nothing */ /* constant_tsc - moved to flags */ }; -- cgit v0.10.2 From 0a4599c894d880763eec6cb93f6c246dac6c3269 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:25 +0100 Subject: [PATCH] x86: Enable NMI watchdog for AMD Family 0x10 CPUs For i386/x86-64. Straight forward -- just reuse the Family 0xf code. Signed-off-by: Andi Kleen diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c index b11abac..5d8a07c 100644 --- a/arch/i386/kernel/nmi.c +++ b/arch/i386/kernel/nmi.c @@ -185,7 +185,8 @@ static __cpuinit inline int nmi_known_cpu(void) { switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_AMD: - return ((boot_cpu_data.x86 == 15) || (boot_cpu_data.x86 == 6)); + return ((boot_cpu_data.x86 == 15) || (boot_cpu_data.x86 == 6) + || (boot_cpu_data.x86 == 16)); case X86_VENDOR_INTEL: if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) return 1; @@ -817,7 +818,8 @@ void setup_apic_nmi_watchdog (void *unused) if (nmi_watchdog == NMI_LOCAL_APIC) { switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_AMD: - if (boot_cpu_data.x86 != 6 && boot_cpu_data.x86 != 15) + if (boot_cpu_data.x86 != 6 && boot_cpu_data.x86 != 15 && + boot_cpu_data.x86 != 16) return; if (!setup_k7_watchdog()) return; diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c index 269fe58..486f4c6 100644 --- a/arch/x86_64/kernel/nmi.c +++ b/arch/x86_64/kernel/nmi.c @@ -172,7 +172,7 @@ static __cpuinit inline int nmi_known_cpu(void) { switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_AMD: - return boot_cpu_data.x86 == 15; + return boot_cpu_data.x86 == 15 || boot_cpu_data.x86 == 16; case X86_VENDOR_INTEL: if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) return 1; -- cgit v0.10.2 From 2ba1ff2b796746722fc4fe8bdcd1f30a834e3d0a Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:25 +0100 Subject: [PATCH] i386: Fix warning in microcode.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix bogus gcc warning linux/arch/i386/kernel/microcode.c:387: warning: ‘new_mc’ may be used uninitialized in this function Signed-off-by: Andi Kleen diff --git a/arch/i386/kernel/microcode.c b/arch/i386/kernel/microcode.c index 381252b..b8f1663 100644 --- a/arch/i386/kernel/microcode.c +++ b/arch/i386/kernel/microcode.c @@ -384,7 +384,7 @@ static int do_microcode_update (void) { long cursor = 0; int error = 0; - void *new_mc; + void *new_mc = NULL; int cpu; cpumask_t old; -- cgit v0.10.2 From 7de6d3618b09c39fdaa6125e23fcf465a65bc266 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:25 +0100 Subject: [PATCH] i386: Fix warning in cpu initialization MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix bogus warning linux/arch/i386/kernel/cpu/transmeta.c:12: warning: ‘cpu_freq’ may be used uninitialized in this function Signed-off-by: Andi Kleen diff --git a/arch/i386/kernel/cpu/transmeta.c b/arch/i386/kernel/cpu/transmeta.c index b536e81..5678d46 100644 --- a/arch/i386/kernel/cpu/transmeta.c +++ b/arch/i386/kernel/cpu/transmeta.c @@ -9,7 +9,7 @@ static void __cpuinit init_transmeta(struct cpuinfo_x86 *c) { unsigned int cap_mask, uk, max, dummy; unsigned int cms_rev1, cms_rev2; - unsigned int cpu_rev, cpu_freq, cpu_flags, new_cpu_rev; + unsigned int cpu_rev, cpu_freq = 0, cpu_flags, new_cpu_rev; char cpu_info[65]; get_model_name(c); /* Same as AMD/Cyrix */ -- cgit v0.10.2 From 120fad72401ebec2a126c16cc48f56c28f3eefe2 Mon Sep 17 00:00:00 2001 From: Alan Date: Tue, 13 Feb 2007 13:26:26 +0100 Subject: [PATCH] i386: Fix Cyrix MediaGX detection The old Cyrix 5520 CPU detection code relied upon the PCI layer setup being done earlier than the CPU setup, which is no longer true. Fortunately we know that if the processor is a MediaGX we can do type 1 pci config accesses to check the companion chip. We thus do those directly and from this find the 5520 and implement the workarounds for the timer problem Original report from takada@mbf.nifty.com, I sent a proposed patch which Takara then corrected, tested and sent back to the list on 10th January. Submitting for merging as it seems to have been missed AK: Changed to use pci-direct.h and fix warning for !CONFIG_PCI (later AK: originally from akpm) Signed-off-by: Alan Cox Signed-off-by: Andi Kleen Cc: Andi Kleen Cc: Cc: Jordan Crouse Signed-off-by: Andrew Morton diff --git a/arch/i386/kernel/cpu/cyrix.c b/arch/i386/kernel/cpu/cyrix.c index 408a74e..de27bd0 100644 --- a/arch/i386/kernel/cpu/cyrix.c +++ b/arch/i386/kernel/cpu/cyrix.c @@ -6,6 +6,7 @@ #include #include #include +#include #include "cpu.h" @@ -183,14 +184,6 @@ static void __cpuinit geode_configure(void) } -#ifdef CONFIG_PCI -static struct pci_device_id __cpuinitdata cyrix_55x0[] = { - { PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510) }, - { PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520) }, - { }, -}; -#endif - static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) { unsigned char dir0, dir0_msn, dir0_lsn, dir1 = 0; @@ -258,6 +251,8 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) case 4: /* MediaGX/GXm or Geode GXM/GXLV/GX1 */ #ifdef CONFIG_PCI + { + u32 vendor, device; /* It isn't really a PCI quirk directly, but the cure is the same. The MediaGX has deep magic SMM stuff that handles the SB emulation. It thows away the fifo on disable_dma() which @@ -273,12 +268,19 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) printk(KERN_INFO "Working around Cyrix MediaGX virtual DMA bugs.\n"); isa_dma_bridge_buggy = 2; + /* We do this before the PCI layer is running. However we + are safe here as we know the bridge must be a Cyrix + companion and must be present */ + vendor = read_pci_config_16(0, 0, 0x12, PCI_VENDOR_ID); + device = read_pci_config_16(0, 0, 0x12, PCI_DEVICE_ID); /* * The 5510/5520 companion chips have a funky PIT. */ - if (pci_dev_present(cyrix_55x0)) + if (vendor == PCI_VENDOR_ID_CYRIX && + (device == PCI_DEVICE_ID_CYRIX_5510 || device == PCI_DEVICE_ID_CYRIX_5520)) pit_latch_buggy = 1; + } #endif c->x86_cache_size=16; /* Yep 16K integrated cache thats it */ -- cgit v0.10.2 From 9fbbd4dd17d0712054368e5e939e28b2456bfe1b Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:26 +0100 Subject: [PATCH] x86: Don't require the vDSO for handling a.out signals and in other strange binfmts. vDSO is not necessarily mapped there. Signed-off-by: Andi Kleen diff --git a/arch/i386/kernel/signal.c b/arch/i386/kernel/signal.c index 8f4afcc..4f99e87 100644 --- a/arch/i386/kernel/signal.c +++ b/arch/i386/kernel/signal.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -349,7 +350,10 @@ static int setup_frame(int sig, struct k_sigaction *ka, goto give_sigsegv; } - restorer = (void *)VDSO_SYM(&__kernel_sigreturn); + if (current->binfmt->hasvdso) + restorer = (void *)VDSO_SYM(&__kernel_sigreturn); + else + restorer = (void *)&frame->retcode; if (ka->sa.sa_flags & SA_RESTORER) restorer = ka->sa.sa_restorer; diff --git a/arch/x86_64/ia32/ia32_signal.c b/arch/x86_64/ia32/ia32_signal.c index 490f7c1..359eacc 100644 --- a/arch/x86_64/ia32/ia32_signal.c +++ b/arch/x86_64/ia32/ia32_signal.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -449,7 +450,11 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka, /* Return stub is in 32bit vsyscall page */ { - void __user *restorer = VSYSCALL32_SIGRETURN; + void __user *restorer; + if (current->binfmt->hasvdso) + restorer = VSYSCALL32_SIGRETURN; + else + restorer = (void *)&frame->retcode; if (ka->sa.sa_flags & SA_RESTORER) restorer = ka->sa.sa_restorer; err |= __put_user(ptr_to_compat(restorer), &frame->pretcode); diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index 669dbe5..51db118 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -76,7 +76,8 @@ static struct linux_binfmt elf_format = { .load_binary = load_elf_binary, .load_shlib = load_elf_library, .core_dump = elf_core_dump, - .min_coredump = ELF_EXEC_PAGESIZE + .min_coredump = ELF_EXEC_PAGESIZE, + .hasvdso = 1 }; #define BAD_ADDR(x) ((unsigned long)(x) >= TASK_SIZE) diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h index c1e82c5..2d956cd 100644 --- a/include/linux/binfmts.h +++ b/include/linux/binfmts.h @@ -59,6 +59,7 @@ struct linux_binfmt { int (*load_shlib)(struct file *); int (*core_dump)(long signr, struct pt_regs * regs, struct file * file); unsigned long min_coredump; /* minimal dump size */ + int hasvdso; }; extern int register_binfmt(struct linux_binfmt *); -- cgit v0.10.2 From 9af3cf054615862c86efcf55a37bb40f0d96e406 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 13 Feb 2007 13:26:26 +0100 Subject: [PATCH] x86_64: Wire up compat epoll_pwait > Which remembers me that I think that MIPS is using the non-compat version > of sys_epoll_pwait for compat syscalls. But maybe MIPS doesn't need a compat > syscall for some reason. Dunno. Which reminds me that x86_64 i386 compat doesn't wire up sys_epoll_pwait ;-) Signed-off-by: Ralf Baechle Signed-off-by: Andi Kleen diff --git a/arch/x86_64/ia32/ia32entry.S b/arch/x86_64/ia32/ia32entry.S index 5f32cf4..eda7a0d 100644 --- a/arch/x86_64/ia32/ia32entry.S +++ b/arch/x86_64/ia32/ia32entry.S @@ -718,4 +718,5 @@ ia32_sys_call_table: .quad compat_sys_vmsplice .quad compat_sys_move_pages .quad sys_getcpu + .quad sys_epoll_pwait ia32_syscall_end: -- cgit v0.10.2 From 992af68147299bb635be97f789e4f66ba7add477 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Tue, 13 Feb 2007 13:26:26 +0100 Subject: [PATCH] i386: paravirt unhandled fallthrough The current code simply calls "start_kernel" directly if we're under a hypervisor and no paravirt_ops backend wants us, because paravirt.c registers that as a backend. This was always a vain hope; start_kernel won't get far without setup. It's also impossible for paravirt_ops backends which don't sit in the arch/i386/kernel directory: they can't link before paravirt.o anyway. Keep it simple: if we pass all the registered paravirt probes, BUG(). Signed-off-by: Rusty Russell Signed-off-by: Andi Kleen diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index 97f1e96..2239693 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -41,8 +41,6 @@ obj-$(CONFIG_HPET_TIMER) += hpet.o obj-$(CONFIG_K8_NB) += k8.o obj-$(CONFIG_VMI) += vmi.o vmitime.o - -# Make sure this is linked after any other paravirt_ops structs: see head.S obj-$(CONFIG_PARAVIRT) += paravirt.o EXTRA_AFLAGS := -traditional diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S index 734be55..b322f72 100644 --- a/arch/i386/kernel/head.S +++ b/arch/i386/kernel/head.S @@ -513,10 +513,11 @@ startup_paravirt: pushl %ecx pushl %eax - /* paravirt.o is last in link, and that probe fn never returns */ pushl $__start_paravirtprobe 1: movl 0(%esp), %eax + cmpl $__stop_paravirtprobe, %eax + je unhandled_paravirt pushl (%eax) movl 8(%esp), %eax call *(%esp) @@ -528,6 +529,10 @@ startup_paravirt: addl $4, (%esp) jmp 1b + +unhandled_paravirt: + /* Nothing wanted us: we're screwed. */ + ud2 #endif /* diff --git a/arch/i386/kernel/paravirt.c b/arch/i386/kernel/paravirt.c index ebe8255..c156ecf 100644 --- a/arch/i386/kernel/paravirt.c +++ b/arch/i386/kernel/paravirt.c @@ -482,9 +482,6 @@ static int __init print_banner(void) } core_initcall(print_banner); -/* We simply declare start_kernel to be the paravirt probe of last resort. */ -paravirt_probe(start_kernel); - struct paravirt_ops paravirt_ops = { .name = "bare hardware", .paravirt_enabled = 0, -- cgit v0.10.2 From 105fddb862d3da2f414329ff7719794fb2bd706b Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Tue, 13 Feb 2007 13:26:26 +0100 Subject: [PATCH] i386: Move mce_disabled to asm/mce.h Allows external actors to disable mce. Signed-off-by: Rusty Russell Signed-off-by: Andi Kleen =================================================================== diff --git a/arch/i386/kernel/cpu/mcheck/mce.h b/arch/i386/kernel/cpu/mcheck/mce.h index 84fd4cf..81fb6e2 100644 --- a/arch/i386/kernel/cpu/mcheck/mce.h +++ b/arch/i386/kernel/cpu/mcheck/mce.h @@ -1,4 +1,5 @@ #include +#include void amd_mcheck_init(struct cpuinfo_x86 *c); void intel_p4_mcheck_init(struct cpuinfo_x86 *c); @@ -9,6 +10,5 @@ void winchip_mcheck_init(struct cpuinfo_x86 *c); /* Call the installed machine check handler for this CPU setup. */ extern fastcall void (*machine_check_vector)(struct pt_regs *, long error_code); -extern int mce_disabled; extern int nr_mce_banks; diff --git a/include/asm-i386/mce.h b/include/asm-i386/mce.h index 7cc1a973..b0a02ee 100644 --- a/include/asm-i386/mce.h +++ b/include/asm-i386/mce.h @@ -3,3 +3,5 @@ extern void mcheck_init(struct cpuinfo_x86 *c); #else #define mcheck_init(c) do {} while(0) #endif + +extern int mce_disabled; -- cgit v0.10.2 From 2a57ff1a7051f0936b57342a57c25658d7ca3cc6 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Tue, 13 Feb 2007 13:26:26 +0100 Subject: [PATCH] i386: Rename cpu_gdt_descr and remove extern declaration from smpboot.c When I implemented the DECLARE_PER_CPU(var) macros, I was careful that people couldn't use "var" in a non-percpu context, by prepending percpu__. I never considered that this would allow them to overload the same name for a per-cpu and a non-percpu variable. It is only one of many horrors in the i386 boot code, but let's rename the non-perpcu cpu_gdt_descr to early_gdt_descr (not boot_gdt_descr, that's something else...) Signed-off-by: Rusty Russell Signed-off-by: Andi Kleen =================================================================== diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S index b322f72..3fa7f93 100644 --- a/arch/i386/kernel/head.S +++ b/arch/i386/kernel/head.S @@ -319,7 +319,7 @@ is386: movl $2,%ecx # set MP call check_x87 call setup_pda - lgdt cpu_gdt_descr + lgdt early_gdt_descr lidt idt_descr ljmp $(__KERNEL_CS),$1f 1: movl $(__KERNEL_DS),%eax # reload all the segment registers @@ -375,7 +375,7 @@ ENTRY(setup_pda) movl start_pda, %eax /* slot the PDA address into the GDT */ - mov cpu_gdt_descr+2, %ecx + mov early_gdt_descr+2, %ecx mov %ax, (__KERNEL_PDA+0+2)(%ecx) /* base & 0x0000ffff */ shr $16, %eax mov %al, (__KERNEL_PDA+4+0)(%ecx) /* base & 0x00ff0000 */ @@ -597,7 +597,7 @@ idt_descr: # boot GDT descriptor (later on used by CPU#0): .word 0 # 32 bit align gdt_desc.address -ENTRY(cpu_gdt_descr) +ENTRY(early_gdt_descr) .word GDT_ENTRIES*8-1 .long cpu_gdt_table diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index 5a00b07..f46a4d0 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -623,7 +623,6 @@ extern struct { unsigned short ss; } stack_start; extern struct i386_pda *start_pda; -extern struct Xgt_desc_struct cpu_gdt_descr; #ifdef CONFIG_NUMA diff --git a/include/asm-i386/desc.h b/include/asm-i386/desc.h index f398cc4..050831f 100644 --- a/include/asm-i386/desc.h +++ b/include/asm-i386/desc.h @@ -22,7 +22,7 @@ struct Xgt_desc_struct { extern struct Xgt_desc_struct idt_descr; DECLARE_PER_CPU(struct Xgt_desc_struct, cpu_gdt_descr); - +extern struct Xgt_desc_struct early_gdt_descr; static inline struct desc_struct *get_cpu_gdt_table(unsigned int cpu) { -- cgit v0.10.2 From 40d22c1b5675e428b3f3f9a945d0bd62e94ca2f1 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Tue, 13 Feb 2007 13:26:26 +0100 Subject: [PATCH] i386: Remove extern declaration from mm/discontig.c, put in header. Extern declarations belong in headers. Times, they are a'changin. Signed-off-by: Rusty Russell Signed-off-by: Andi Kleen =================================================================== diff --git a/arch/i386/mm/discontig.c b/arch/i386/mm/discontig.c index e0c390d..aa58720 100644 --- a/arch/i386/mm/discontig.c +++ b/arch/i386/mm/discontig.c @@ -101,7 +101,6 @@ extern void find_max_pfn(void); extern void add_one_highpage_init(struct page *, int, int); extern struct e820map e820; -extern unsigned long init_pg_tables_end; extern unsigned long highend_pfn, highstart_pfn; extern unsigned long max_low_pfn; extern unsigned long totalram_pages; diff --git a/include/asm-i386/setup.h b/include/asm-i386/setup.h index 7631627..0e8077c 100644 --- a/include/asm-i386/setup.h +++ b/include/asm-i386/setup.h @@ -77,6 +77,8 @@ int __init sanitize_e820_map(struct e820entry * biosmap, char * pnr_map); void __init add_memory_region(unsigned long long start, unsigned long long size, int type); +extern unsigned long init_pg_tables_end; + #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ -- cgit v0.10.2 From 62cc49396e593dd71c6595302bb10b085aefbfa5 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:26 +0100 Subject: [PATCH] x86: Unify pcspeaker platform device code between i386/x86-64 Trivial cleanup. Only change is that it is always compiled in now on x86-64 like on i386. Signed-off-by: Andi Kleen diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index 2239693..cbe4e60 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -42,6 +42,7 @@ obj-$(CONFIG_K8_NB) += k8.o obj-$(CONFIG_VMI) += vmi.o vmitime.o obj-$(CONFIG_PARAVIRT) += paravirt.o +obj-y += pcspeaker.o EXTRA_AFLAGS := -traditional diff --git a/arch/i386/kernel/pcspeaker.c b/arch/i386/kernel/pcspeaker.c new file mode 100644 index 0000000..bc1f2d3 --- /dev/null +++ b/arch/i386/kernel/pcspeaker.c @@ -0,0 +1,20 @@ +#include +#include +#include + +static __init int add_pcspkr(void) +{ + struct platform_device *pd; + int ret; + + pd = platform_device_alloc("pcspkr", -1); + if (!pd) + return -ENOMEM; + + ret = platform_device_add(pd); + if (ret) + platform_device_put(pd); + + return ret; +} +device_initcall(add_pcspkr); diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index bd8c218..122623d 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -33,7 +33,6 @@ #include #include #include -#include #include #include #include @@ -660,28 +659,3 @@ void __init setup_arch(char **cmdline_p) #endif tsc_init(); } - -static __init int add_pcspkr(void) -{ - struct platform_device *pd; - int ret; - - pd = platform_device_alloc("pcspkr", -1); - if (!pd) - return -ENOMEM; - - ret = platform_device_add(pd); - if (ret) - platform_device_put(pd); - - return ret; -} -device_initcall(add_pcspkr); - -/* - * Local Variables: - * mode:c - * c-file-style:"k&r" - * c-basic-offset:8 - * End: - */ diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile index 3c7cbff..ae39945 100644 --- a/arch/x86_64/kernel/Makefile +++ b/arch/x86_64/kernel/Makefile @@ -43,6 +43,7 @@ obj-$(CONFIG_PCI) += early-quirks.o obj-y += topology.o obj-y += intel_cacheinfo.o +obj-y += pcspeaker.o CFLAGS_vsyscall.o := $(PROFILING) -g0 @@ -56,3 +57,4 @@ quirks-y += ../../i386/kernel/quirks.o i8237-y += ../../i386/kernel/i8237.o msr-$(subst m,y,$(CONFIG_X86_MSR)) += ../../i386/kernel/msr.o alternative-y += ../../i386/kernel/alternative.o +pcspeaker-y += ../../i386/kernel/pcspeaker.o diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index 13daaf3..3d98b69 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -1104,23 +1104,3 @@ struct seq_operations cpuinfo_op = { .stop = c_stop, .show = show_cpuinfo, }; - -#if defined(CONFIG_INPUT_PCSPKR) || defined(CONFIG_INPUT_PCSPKR_MODULE) -#include -static __init int add_pcspkr(void) -{ - struct platform_device *pd; - int ret; - - pd = platform_device_alloc("pcspkr", -1); - if (!pd) - return -ENOMEM; - - ret = platform_device_add(pd); - if (ret) - platform_device_put(pd); - - return ret; -} -device_initcall(add_pcspkr); -#endif -- cgit v0.10.2 From 98838ec984b78c625bbf9a5daaf001cd216b8f86 Mon Sep 17 00:00:00 2001 From: Giuliano Procida Date: Tue, 13 Feb 2007 13:26:26 +0100 Subject: [PATCH] i386: fix 32-bit ioctls on x64_32 [MTRR] fix 32-bit ioctls on x64_32 Signed-off-by: Giuliano Procida Signed-off-by: Andi Kleen diff --git a/arch/i386/kernel/cpu/mtrr/if.c b/arch/i386/kernel/cpu/mtrr/if.c index ee771f3..c7d8f17 100644 --- a/arch/i386/kernel/cpu/mtrr/if.c +++ b/arch/i386/kernel/cpu/mtrr/if.c @@ -211,6 +211,9 @@ mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg) default: return -ENOTTY; case MTRRIOC_ADD_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_ADD_ENTRY: +#endif if (!capable(CAP_SYS_ADMIN)) return -EPERM; err = @@ -218,21 +221,33 @@ mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg) file, 0); break; case MTRRIOC_SET_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_SET_ENTRY: +#endif if (!capable(CAP_SYS_ADMIN)) return -EPERM; err = mtrr_add(sentry.base, sentry.size, sentry.type, 0); break; case MTRRIOC_DEL_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_DEL_ENTRY: +#endif if (!capable(CAP_SYS_ADMIN)) return -EPERM; err = mtrr_file_del(sentry.base, sentry.size, file, 0); break; case MTRRIOC_KILL_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_KILL_ENTRY: +#endif if (!capable(CAP_SYS_ADMIN)) return -EPERM; err = mtrr_del(-1, sentry.base, sentry.size); break; case MTRRIOC_GET_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_GET_ENTRY: +#endif if (gentry.regnum >= num_var_ranges) return -EINVAL; mtrr_if->get(gentry.regnum, &gentry.base, &size, &type); @@ -249,6 +264,9 @@ mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg) break; case MTRRIOC_ADD_PAGE_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_ADD_PAGE_ENTRY: +#endif if (!capable(CAP_SYS_ADMIN)) return -EPERM; err = @@ -256,21 +274,33 @@ mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg) file, 1); break; case MTRRIOC_SET_PAGE_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_SET_PAGE_ENTRY: +#endif if (!capable(CAP_SYS_ADMIN)) return -EPERM; err = mtrr_add_page(sentry.base, sentry.size, sentry.type, 0); break; case MTRRIOC_DEL_PAGE_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_DEL_PAGE_ENTRY: +#endif if (!capable(CAP_SYS_ADMIN)) return -EPERM; err = mtrr_file_del(sentry.base, sentry.size, file, 1); break; case MTRRIOC_KILL_PAGE_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_KILL_PAGE_ENTRY: +#endif if (!capable(CAP_SYS_ADMIN)) return -EPERM; err = mtrr_del_page(-1, sentry.base, sentry.size); break; case MTRRIOC_GET_PAGE_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_GET_PAGE_ENTRY: +#endif if (gentry.regnum >= num_var_ranges) return -EINVAL; mtrr_if->get(gentry.regnum, &gentry.base, &size, &type); -- cgit v0.10.2 From 22c5ace7290b792faf64ffe90cf933950fbf52db Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 13 Feb 2007 13:26:26 +0100 Subject: [PATCH] i386: Fix broken CONFIG_COMPAT_VDSO on i386 After updating several machines to 2.6.20, I can't boot anymore the single one of them that supports the NX bit and is configured as a 32-bit system. My understanding is that the VDSO changes in 2.6.20-rc7 were not fully cooked, in that with that config option enabled VDSO_SYM(x) now equals x, meaning that an address in the fixmap area is now being passed to apps via AT_SYSINFO. However, the page is mapped with PAGE_READONLY rather than PAGE_READONLY_EXEC. I'm not certain whether having app code go through the fixmap area is intended, but in case it is here is the simple patch that makes things work again. Signed-off-by: Jan Beulich Signed-off-by: Andi Kleen diff --git a/arch/i386/kernel/sysenter.c b/arch/i386/kernel/sysenter.c index bc882a2..13ca54a 100644 --- a/arch/i386/kernel/sysenter.c +++ b/arch/i386/kernel/sysenter.c @@ -78,7 +78,7 @@ int __init sysenter_setup(void) syscall_pages[0] = virt_to_page(syscall_page); #ifdef CONFIG_COMPAT_VDSO - __set_fixmap(FIX_VDSO, __pa(syscall_page), PAGE_READONLY); + __set_fixmap(FIX_VDSO, __pa(syscall_page), PAGE_READONLY_EXEC); printk("Compat vDSO mapped to %08lx.\n", __fix_to_virt(FIX_VDSO)); #endif -- cgit v0.10.2 From 126b1922367fbe5513daa675a2abd13ed3917f4e Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:26 +0100 Subject: [PATCH] x86-64: Remove mk_pte_phys() - Convert last user to pfn_pte - Remove mk_pte_phys Suggested by Jan Beulich Signed-off-by: Andi Kleen diff --git a/arch/x86_64/mm/pageattr.c b/arch/x86_64/mm/pageattr.c index ccb91dd..65c5eaa 100644 --- a/arch/x86_64/mm/pageattr.c +++ b/arch/x86_64/mm/pageattr.c @@ -107,6 +107,7 @@ static void revert_page(unsigned long address, pgprot_t ref_prot) pud_t *pud; pmd_t *pmd; pte_t large_pte; + unsigned long pfn; pgd = pgd_offset_k(address); BUG_ON(pgd_none(*pgd)); @@ -114,7 +115,8 @@ static void revert_page(unsigned long address, pgprot_t ref_prot) BUG_ON(pud_none(*pud)); pmd = pmd_offset(pud, address); BUG_ON(pmd_val(*pmd) & _PAGE_PSE); - large_pte = mk_pte_phys(__pa(address) & LARGE_PAGE_MASK, ref_prot); + pfn = (__pa(address) & LARGE_PAGE_MASK) >> PAGE_SHIFT; + large_pte = pfn_pte(pfn, ref_prot); large_pte = pte_mkhuge(large_pte); set_pte((pte_t *)pmd, large_pte); } diff --git a/include/asm-x86_64/pgtable.h b/include/asm-x86_64/pgtable.h index 59901c6..730bd60 100644 --- a/include/asm-x86_64/pgtable.h +++ b/include/asm-x86_64/pgtable.h @@ -359,15 +359,6 @@ static inline int pmd_large(pmd_t pte) { #define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) #define mk_pte_huge(entry) (pte_val(entry) |= _PAGE_PRESENT | _PAGE_PSE) -/* physical address -> PTE */ -static inline pte_t mk_pte_phys(unsigned long physpage, pgprot_t pgprot) -{ - pte_t pte; - pte_val(pte) = physpage | pgprot_val(pgprot); - pte_val(pte) &= __supported_pte_mask; - return pte; -} - /* Change flags of a PTE */ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) { -- cgit v0.10.2 From c2882bb12cbd8a4170e673e6a33c6be047b75bc1 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Fri, 9 Feb 2007 17:28:31 -0600 Subject: [POWERPC] 85xx: Add support for the 8568 MDS board Add support for the MPC8568 MDS reference board Signed-off-by: Andrew Fleming Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts new file mode 100644 index 0000000..06d2465 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -0,0 +1,380 @@ +/* + * MPC8568E MDS Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/* +/memreserve/ 00000000 1000000; +*/ + +/ { + model = "MPC8568EMDS"; + compatible = "MPC85xxMDS"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8568@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + 32-bit; + linux,phandle = <201>; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 10000000>; + }; + + bcsr@f8000000 { + device_type = "board-control"; + reg = ; + }; + + soc8568@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = ; + bus-frequency = <0>; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <1b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + i2c@3100 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3100 100>; + interrupts = <1b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <31 1>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <32 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + + ethernet-phy@2 { + linux,phandle = <2452002>; + interrupt-parent = <40000>; + interrupts = <31 1>; + reg = <2>; + device_type = "ethernet-phy"; + }; + ethernet-phy@3 { + linux,phandle = <2452003>; + interrupt-parent = <40000>; + interrupts = <32 1>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + mac-address = [ 00 00 00 00 00 00 ]; + interrupts = ; + interrupt-parent = <40000>; + phy-handle = <2452002>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + mac-address = [ 00 00 00 00 00 00]; + interrupts = <13 2 14 2 18 2>; + interrupt-parent = <40000>; + phy-handle = <2452003>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 f000>; + interrupts = <1d 2>; + interrupt-parent = <40000>; + num-channels = <4>; + channel-fifo-len = <18>; + exec-units-mask = <000000fe>; + descriptor-types-mask = <012b0ebf>; + }; + + pic@40000 { + linux,phandle = <40000>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + par_io@e0100 { + reg = ; + device_type = "par_io"; + num-ports = <7>; + + ucc_pin@01 { + linux,phandle = ; + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 4 0a 1 0 2 0 /* TxD0 */ + 4 09 1 0 2 0 /* TxD1 */ + 4 08 1 0 2 0 /* TxD2 */ + 4 07 1 0 2 0 /* TxD3 */ + 4 17 1 0 2 0 /* TxD4 */ + 4 16 1 0 2 0 /* TxD5 */ + 4 15 1 0 2 0 /* TxD6 */ + 4 14 1 0 2 0 /* TxD7 */ + 4 0f 2 0 2 0 /* RxD0 */ + 4 0e 2 0 2 0 /* RxD1 */ + 4 0d 2 0 2 0 /* RxD2 */ + 4 0c 2 0 2 0 /* RxD3 */ + 4 1d 2 0 2 0 /* RxD4 */ + 4 1c 2 0 2 0 /* RxD5 */ + 4 1b 2 0 2 0 /* RxD6 */ + 4 1a 2 0 2 0 /* RxD7 */ + 4 0b 1 0 2 0 /* TX_EN */ + 4 18 1 0 2 0 /* TX_ER */ + 4 0f 2 0 2 0 /* RX_DV */ + 4 1e 2 0 2 0 /* RX_ER */ + 4 11 2 0 2 0 /* RX_CLK */ + 4 13 1 0 2 0 /* GTX_CLK */ + 1 1f 2 0 3 0>; /* GTX125 */ + }; + ucc_pin@02 { + linux,phandle = ; + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 5 0a 1 0 2 0 /* TxD0 */ + 5 09 1 0 2 0 /* TxD1 */ + 5 08 1 0 2 0 /* TxD2 */ + 5 07 1 0 2 0 /* TxD3 */ + 5 17 1 0 2 0 /* TxD4 */ + 5 16 1 0 2 0 /* TxD5 */ + 5 15 1 0 2 0 /* TxD6 */ + 5 14 1 0 2 0 /* TxD7 */ + 5 0f 2 0 2 0 /* RxD0 */ + 5 0e 2 0 2 0 /* RxD1 */ + 5 0d 2 0 2 0 /* RxD2 */ + 5 0c 2 0 2 0 /* RxD3 */ + 5 1d 2 0 2 0 /* RxD4 */ + 5 1c 2 0 2 0 /* RxD5 */ + 5 1b 2 0 2 0 /* RxD6 */ + 5 1a 2 0 2 0 /* RxD7 */ + 5 0b 1 0 2 0 /* TX_EN */ + 5 18 1 0 2 0 /* TX_ER */ + 5 10 2 0 2 0 /* RX_DV */ + 5 1e 2 0 2 0 /* RX_ER */ + 5 11 2 0 2 0 /* RX_CLK */ + 5 13 1 0 2 0 /* GTX_CLK */ + 1 1f 2 0 3 0 /* GTX125 */ + 4 06 3 0 2 0 /* MDIO */ + 4 05 1 0 2 0>; /* MDC */ + }; + }; + }; + + qe@e0080000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + model = "QE"; + ranges = <0 e0080000 00040000>; + reg = ; + brg-frequency = <0>; + bus-frequency = <179A7B00>; + + muram@10000 { + device_type = "muram"; + ranges = <0 00010000 0000c000>; + + data-only@0{ + reg = <0 c000>; + }; + }; + + spi@4c0 { + device_type = "spi"; + compatible = "fsl_spi"; + reg = <4c0 40>; + interrupts = <2>; + interrupt-parent = <80>; + mode = "cpu"; + }; + + spi@500 { + device_type = "spi"; + compatible = "fsl_spi"; + reg = <500 40>; + interrupts = <1>; + interrupt-parent = <80>; + mode = "cpu"; + }; + + ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + model = "UCC"; + device-id = <1>; + reg = <2000 200>; + interrupts = <20>; + interrupt-parent = <80>; + mac-address = [ 00 04 9f 00 23 23 ]; + rx-clock = <0>; + tx-clock = <19>; + phy-handle = <212000>; + pio-handle = ; + }; + + ucc@3000 { + device_type = "network"; + compatible = "ucc_geth"; + model = "UCC"; + device-id = <2>; + reg = <3000 200>; + interrupts = <21>; + interrupt-parent = <80>; + mac-address = [ 00 11 22 33 44 55 ]; + rx-clock = <0>; + tx-clock = <14>; + phy-handle = <212001>; + pio-handle = ; + }; + + mdio@2120 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2120 18>; + device_type = "mdio"; + compatible = "ucc_geth_phy"; + + /* These are the same PHYs as on + * gianfar's MDIO bus */ + ethernet-phy@00 { + linux,phandle = <212000>; + interrupt-parent = <40000>; + interrupts = <31 1>; + reg = <0>; + device_type = "ethernet-phy"; + interface = <6>; //ENET_1000_GMII + }; + ethernet-phy@01 { + linux,phandle = <212001>; + interrupt-parent = <40000>; + interrupts = <32 1>; + reg = <1>; + device_type = "ethernet-phy"; + interface = <6>; + }; + ethernet-phy@02 { + linux,phandle = <212002>; + interrupt-parent = <40000>; + interrupts = <31 1>; + reg = <2>; + device_type = "ethernet-phy"; + interface = <6>; //ENET_1000_GMII + }; + ethernet-phy@03 { + linux,phandle = <212003>; + interrupt-parent = <40000>; + interrupts = <32 1>; + reg = <3>; + device_type = "ethernet-phy"; + interface = <6>; //ENET_1000_GMII + }; + }; + + qeic@80 { + linux,phandle = <80>; + interrupt-controller; + device_type = "qeic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <80 80>; + built-in; + big-endian; + interrupts = <1e 2 1e 2>; //high:30 low:30 + interrupt-parent = <40000>; + }; + + }; +}; diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 0584f3c..0efdd2f 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -23,6 +23,13 @@ config MPC85xx_CDS help This option enables support for the MPC85xx CDS board +config MPC8568_MDS + bool "Freescale MPC8568 MDS" + select DEFAULT_UIMAGE +# select QUICC_ENGINE + help + This option enables support for the MPC8568 MDS board + endchoice config MPC8540 @@ -36,6 +43,12 @@ config MPC8560 select PPC_INDIRECT_PCI default y if MPC8560_ADS +config MPC85xx + bool + select PPC_UDBG_16550 + select PPC_INDIRECT_PCI + default y if MPC8540_ADS || MPC85xx_CDS || MPC8560_ADS || MPC8568_MDS + config PPC_INDIRECT_PCI_BE bool depends on PPC_85xx diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 282f5d0..e40e521 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_PPC_85xx) += misc.o pci.o obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o +obj-$(CONFIG_MPC8568_MDS) += mpc8568_mds.o diff --git a/arch/powerpc/platforms/85xx/mpc8568_mds.c b/arch/powerpc/platforms/85xx/mpc8568_mds.c new file mode 100644 index 0000000..0861d11 --- /dev/null +++ b/arch/powerpc/platforms/85xx/mpc8568_mds.c @@ -0,0 +1,246 @@ +/* + * Copyright (C) Freescale Semicondutor, Inc. 2006-2007. All rights reserved. + * + * Author: Andy Fleming + * + * Based on 83xx/mpc8360e_pb.c by: + * Li Yang + * Yin Olivia + * + * Description: + * MPC8568E MDS PB board specific routines. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mpc85xx.h" + +#undef DEBUG +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +#endif + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init mpc8568_mds_setup_arch(void) +{ + struct device_node *np; + static u8 *bcsr_regs = NULL; + + + if (ppc_md.progress) + ppc_md.progress("mpc8568_mds_setup_arch()", 0); + + np = of_find_node_by_type(NULL, "cpu"); + if (np != NULL) { + const unsigned int *fp = + get_property(np, "clock-frequency", NULL); + if (fp != NULL) + loops_per_jiffy = *fp / HZ; + else + loops_per_jiffy = 50000000 / HZ; + of_node_put(np); + } + + /* Map BCSR area */ + np = of_find_node_by_name(NULL, "bcsr"); + if (np != NULL) { + struct resource res; + + of_address_to_resource(np, 0, &res); + bcsr_regs = ioremap(res.start, res.end - res.start +1); + of_node_put(np); + } + +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) { + add_bridge(np); + } + of_node_put(np); +#endif + +#ifdef CONFIG_QUICC_ENGINE + if ((np = of_find_node_by_name(NULL, "qe")) != NULL) { + qe_reset(); + of_node_put(np); + } + + if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) { + struct device_node *ucc = NULL; + + par_io_init(np); + of_node_put(np); + + for ( ;(ucc = of_find_node_by_name(ucc, "ucc")) != NULL;) + par_io_of_config(ucc); + + of_node_put(ucc); + } + + if (bcsr_regs) { + u8 bcsr_phy; + + /* Reset the Ethernet PHY */ + bcsr_phy = in_be8(&bcsr_regs[9]); + bcsr_phy &= ~0x20; + out_be8(&bcsr_regs[9], bcsr_phy); + + udelay(1000); + + bcsr_phy = in_be8(&bcsr_regs[9]); + bcsr_phy |= 0x20; + out_be8(&bcsr_regs[9], bcsr_phy); + + iounmap(bcsr_regs); + } + +#endif /* CONFIG_QUICC_ENGINE */ +} + +static struct of_device_id mpc8568_ids[] = { + { .type = "soc", }, + { .compatible = "soc", }, + { .type = "qe", }, + {}, +}; + +static int __init mpc8568_publish_devices(void) +{ + if (!machine_is(mpc8568_mds)) + return 0; + + /* Publish the QE devices */ + of_platform_bus_probe(NULL,mpc8568_ids,NULL); + + return 0; +} +device_initcall(mpc8568_publish_devices); + +static void __init mpc8568_mds_pic_init(void) +{ + struct mpic *mpic; + struct resource r; + struct device_node *np = NULL; + + np = of_find_node_by_type(NULL, "open-pic"); + if (!np) + return; + + if (of_address_to_resource(np, 0, &r)) { + printk(KERN_ERR "Failed to map mpic register space\n"); + of_node_put(np); + return; + } + + mpic = mpic_alloc(np, r.start, + MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + 4, 0, " OpenPIC "); + BUG_ON(mpic == NULL); + of_node_put(np); + + /* Internal Interrupts */ + mpic_assign_isu(mpic, 0, r.start + 0x10200); + mpic_assign_isu(mpic, 1, r.start + 0x10280); + mpic_assign_isu(mpic, 2, r.start + 0x10300); + mpic_assign_isu(mpic, 3, r.start + 0x10380); + mpic_assign_isu(mpic, 4, r.start + 0x10400); + mpic_assign_isu(mpic, 5, r.start + 0x10480); + mpic_assign_isu(mpic, 6, r.start + 0x10500); + mpic_assign_isu(mpic, 7, r.start + 0x10580); + mpic_assign_isu(mpic, 8, r.start + 0x10600); + mpic_assign_isu(mpic, 9, r.start + 0x10680); + mpic_assign_isu(mpic, 10, r.start + 0x10700); + mpic_assign_isu(mpic, 11, r.start + 0x10780); + + /* External Interrupts */ + mpic_assign_isu(mpic, 12, r.start + 0x10000); + mpic_assign_isu(mpic, 13, r.start + 0x10080); + mpic_assign_isu(mpic, 14, r.start + 0x10100); + + mpic_init(mpic); + + +#ifdef CONFIG_QUICC_ENGINE + np = of_find_node_by_type(NULL, "qeic"); + if (!np) + return; + + qe_ic_init(np, 0); + of_node_put(np); +#endif /* CONFIG_QUICC_ENGINE */ +} + + +static int __init mpc8568_mds_probe(void) +{ + char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), + "model", NULL); + if (model == NULL) + return 0; + if (strcmp(model, "MPC8568EMDS")) + return 0; + + DBG("MPC8568EMDS found\n"); + + return 1; +} + + +define_machine(mpc8568_mds) { + .name = "MPC8568E MDS", + .probe = mpc8568_mds_probe, + .setup_arch = mpc8568_mds_setup_arch, + .init_IRQ = mpc8568_mds_pic_init, + .get_irq = mpic_get_irq, + .restart = mpc85xx_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; -- cgit v0.10.2 From eb11a720a85833bbd9b92628f196583ee1d50d4e Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Fri, 9 Feb 2007 17:30:09 -0600 Subject: [POWERPC] 85xx: Add a defconfig for the 8568 MDS Add defconfig for the MPC8568 MDS reference board Signed-off-by: Andrew Fleming Signed-off-by: Kumar Gala diff --git a/arch/powerpc/configs/mpc8568mds_defconfig b/arch/powerpc/configs/mpc8568mds_defconfig new file mode 100644 index 0000000..058e06d --- /dev/null +++ b/arch/powerpc/configs/mpc8568mds_defconfig @@ -0,0 +1,992 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20-rc5 +# Wed Feb 7 23:54:25 2007 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +CONFIG_PPC_85xx=y +# CONFIG_PPC_86xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +CONFIG_85xx=y +CONFIG_E500=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_BOOKE=y +CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set +CONFIG_SPE=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Platform support +# +# CONFIG_MPC8540_ADS is not set +# CONFIG_MPC8560_ADS is not set +# CONFIG_MPC85xx_CDS is not set +CONFIG_MPC8568_MDS=y +CONFIG_MPC85xx=y +CONFIG_PPC_INDIRECT_PCI_BE=y +CONFIG_MPIC=y + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_MATH_EMULATION=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y + +# +# Ethernet (1000 Mbit) +# +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_BOOKE_WDT is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Virtualization +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y + +# +# Instrumentation Support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_DEBUGGER=y +# CONFIG_XMON is not set +# CONFIG_BDI_SWITCH is not set +CONFIG_BOOTX_TEXT=y +CONFIG_PPC_EARLY_DEBUG=y +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# -- cgit v0.10.2 From 8c4a013da84e69e4d736363921792e1b37525577 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Fri, 9 Feb 2007 14:00:36 -0600 Subject: [POWERPC] 83xx: Add support for MPC8349E-mITX-GP This patch adds a defconfig and a DTS for the MPC8349E-mITX-GP, a variant of the MPC8349E-mITX. USB is disabled because the only USB port is not setup properly by firmware/kernel Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts new file mode 100644 index 0000000..3190774 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts @@ -0,0 +1,187 @@ +/* + * MPC8349E-mITX-GP Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +/ { + model = "MPC8349EMITXGP"; + compatible = "MPC834xMITXGP"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8349@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; + i-cache-line-size = <20>; + d-cache-size = <8000>; + i-cache-size = <8000>; + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + 32-bit; + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 10000000>; + }; + + soc8349@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = ; + bus-frequency = <0>; // from bootloader + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <200 100>; + }; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = ; + interrupt-parent = <700>; + dfsrr; + }; + + i2c@3100 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3100 100>; + interrupts = ; + interrupt-parent = <700>; + dfsrr; + }; + + spi@7000 { + device_type = "spi"; + compatible = "mpc83xx_spi"; + reg = <7000 1000>; + interrupts = <10 8>; + interrupt-parent = <700>; + mode = <0>; + }; + + usb@23000 { + device_type = "usb"; + compatible = "fsl-usb2-dr"; + reg = <23000 1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <700>; + interrupts = <26 2>; + dr_mode = "otg"; + phy_type = "ulpi"; + }; + + mdio@24520 { + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <24520>; + + /* Vitesse 8201 */ + ethernet-phy@1c { + linux,phandle = <245201c>; + interrupt-parent = <700>; + interrupts = <12 2>; + reg = <1c>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <20 8 21 8 22 8>; + interrupt-parent = <700>; + phy-handle = <245201c>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; // from bootloader + interrupts = <9 8>; + interrupt-parent = <700>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; // from bootloader + interrupts = ; + interrupt-parent = <700>; + }; + + pci@8600 { + interrupt-map-mask = ; + interrupt-map = < + /* IDSEL 0x0F - PCI Slot */ + 7800 0 0 1 700 14 8 /* PCI_INTA */ + 7800 0 0 2 700 15 8 /* PCI_INTB */ + >; + interrupt-parent = <700>; + interrupts = <43 8>; + bus-range = <1 1>; + ranges = <42000000 0 a0000000 a0000000 0 10000000 + 02000000 0 b0000000 b0000000 0 10000000 + 01000000 0 00000000 e3000000 0 01000000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8600 100>; + compatible = "83xx"; + device_type = "pci"; + }; + + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 10000>; + interrupts = ; + interrupt-parent = <700>; + num-channels = <4>; + channel-fifo-len = <18>; + exec-units-mask = <0000007e>; + descriptor-types-mask = <01010ebf>; + }; + + pic@700 { + linux,phandle = <700>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <700 100>; + built-in; + device_type = "ipic"; + }; + }; +}; diff --git a/arch/powerpc/configs/mpc834x_itxgp_defconfig b/arch/powerpc/configs/mpc834x_itxgp_defconfig new file mode 100644 index 0000000..4aa666c --- /dev/null +++ b/arch/powerpc/configs/mpc834x_itxgp_defconfig @@ -0,0 +1,1174 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20 +# Fri Feb 9 13:28:19 2007 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_82xx is not set +CONFIG_PPC_83xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_86xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_6xx=y +CONFIG_83xx=y +CONFIG_PPC_FPU=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_SMP is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_PPC_GEN550=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Platform support +# +# CONFIG_MPC832x_MDS is not set +# CONFIG_MPC834x_SYS is not set +CONFIG_MPC834x_ITX=y +# CONFIG_MPC8360E_PB is not set +CONFIG_MPC834x=y +# CONFIG_MPIC is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_PARTITIONS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0xfe000000 +CONFIG_MTD_PHYSMAP_LEN=0x800000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PHYSMAP_OF is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_NAND_CAFE is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +CONFIG_CICADA_PHY=y +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +# CONFIG_NET_ETHERNET is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y +# CONFIG_QLA3XXX is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_PCI is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_83xx_WDT=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +CONFIG_SENSORS_PCF8574=y +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y +CONFIG_SPI_MPC83xx=y + +# +# SPI Protocol Masters +# + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y + +# +# RTC drivers +# +# CONFIG_RTC_DRV_X1205 is not set +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# DMA Engine support +# +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +CONFIG_NET_DMA=y + +# +# DMA Devices +# +CONFIG_INTEL_IOATDMA=y + +# +# Virtualization +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# -- cgit v0.10.2 From a20d0ce694e56f94857eacdc8534357d798460fd Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Fri, 9 Feb 2007 10:01:50 -0600 Subject: [POWERPC] 83xx: Updated mpc834x_itx_defconfig This patch updates the defconfig for the MPC8349E-mITX. In addition to picking up changes from recent kernels, disables support for e100 (which doesn't ship with the system), turns off input devices, turns on some I2C support, turns off HW monitoring (HW not yet supported), turns off OHCI USB (not used), turns off USB gadget support (HW not yet supported), turns on DOS FS support, and turns off kernel debugging. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala diff --git a/arch/powerpc/configs/mpc834x_itx_defconfig b/arch/powerpc/configs/mpc834x_itx_defconfig index 7902806..23d8964 100644 --- a/arch/powerpc/configs/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/mpc834x_itx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc5 -# Fri Jan 26 00:19:02 2007 +# Linux kernel version: 2.6.20 +# Wed Feb 7 13:12:18 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -34,9 +34,9 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_PPC_83xx=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_86xx is not set +# CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set -# CONFIG_8xx is not set # CONFIG_E200 is not set CONFIG_6xx=y CONFIG_83xx=y @@ -178,7 +178,6 @@ CONFIG_FSL_SOC=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCIEPORTBUS is not set -# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -303,7 +302,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set # CONFIG_SYS_HYPERVISOR is not set # @@ -523,6 +521,7 @@ CONFIG_SCSI_SPI_ATTRS=y # Serial ATA (prod) and Parallel ATA (experimental) drivers # CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set @@ -647,37 +646,7 @@ CONFIG_CICADA_PHY=y # # Ethernet (10 or 100Mbit) # -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -CONFIG_E100=y -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set +# CONFIG_NET_ETHERNET is not set # # Ethernet (1000 Mbit) @@ -693,7 +662,6 @@ CONFIG_E100=y # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y @@ -746,26 +714,7 @@ CONFIG_GFAR_NAPI=y # # Input device support # -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +# CONFIG_INPUT is not set # # Hardware I/O ports @@ -784,7 +733,7 @@ CONFIG_INPUT=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y +# CONFIG_SERIAL_8250_PCI is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -887,7 +836,7 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set +CONFIG_SENSORS_PCF8574=y # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_M41T00 is not set @@ -901,7 +850,6 @@ CONFIG_I2C_MPC=y # SPI support # CONFIG_SPI=y -# CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # @@ -922,52 +870,8 @@ CONFIG_SPI_MPC83xx=y # # Hardware Monitoring support # -CONFIG_HWMON=y +# CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM70 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47M192 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_VT8231 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83791D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83793 is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # # Multimedia devices @@ -983,7 +887,7 @@ CONFIG_HWMON=y # # Graphics support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_FIRMWARE_EDID is not set # CONFIG_FB is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set @@ -994,11 +898,6 @@ CONFIG_FIRMWARE_EDID=y # CONFIG_SOUND is not set # -# HID Devices -# -CONFIG_HID=y - -# # USB support # CONFIG_USB_ARCH_HAS_HCD=y @@ -1023,10 +922,8 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # @@ -1058,25 +955,10 @@ CONFIG_USB_STORAGE=y # # USB Input Devices # -# CONFIG_USB_HID is not set # # USB HID Boot Protocol drivers # -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices @@ -1133,25 +1015,7 @@ CONFIG_USB_MON=y # # USB Gadget Support # -CONFIG_USB_GADGET=y -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_SELECTED=y -CONFIG_USB_GADGET_NET2280=y -CONFIG_USB_NET2280=y -# CONFIG_USB_GADGET_PXA2XX is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -CONFIG_USB_GADGET_DUALSPEED=y -# CONFIG_USB_ZERO is not set -CONFIG_USB_ETH=y -CONFIG_USB_ETH_RNDIS=y -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_FILE_STORAGE is not set -# CONFIG_USB_G_SERIAL is not set -# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_GADGET is not set # # MMC/SD Card support @@ -1273,8 +1137,11 @@ CONFIG_DNOTIFY=y # # DOS/FAT/NT Filesystems # -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -1340,7 +1207,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set +CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set @@ -1356,7 +1223,46 @@ CONFIG_MSDOS_PARTITION=y # # Native Language Support # -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # # Distributed Lock Manager @@ -1388,27 +1294,9 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set -CONFIG_FORCED_INLINING=y -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_DEBUGGER is not set -# CONFIG_BDI_SWITCH is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_SERIAL_TEXT_DEBUG is not set # CONFIG_PPC_EARLY_DEBUG is not set -- cgit v0.10.2 From 552ce544edfbe9bce79952a8c0f8d65b7f2d16bb Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 13 Feb 2007 12:08:18 -0800 Subject: Revert "[PATCH] Fix d_path for lazy unmounts" This reverts commit eb3dfb0cb1f4a44e2d0553f89514ce9f2a9fcaf1. It causes some strange Gnome problem with dbus-daemon getting stuck, so we'll revert it until that problem is understood. Reported by both walt and Greg KH, who both independently git-bisected the problem to this commit. Andreas is looking at it. Reported-by: walt Reported-by: Greg KH Acked-by: Andreas Gruenbacher Signed-off-by: Linus Torvalds diff --git a/fs/dcache.c b/fs/dcache.c index b5f6139..d68631f 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -1739,41 +1739,45 @@ shouldnt_be_hashed: * @rootmnt: vfsmnt to which the root dentry belongs * @buffer: buffer to return value in * @buflen: buffer length - * @fail_deleted: what to return for deleted files * - * Convert a dentry into an ASCII path name. If the entry has been deleted, - * then if @fail_deleted is true, ERR_PTR(-ENOENT) is returned. Otherwise, - * the the string " (deleted)" is appended. Note that this is ambiguous. + * Convert a dentry into an ASCII path name. If the entry has been deleted + * the string " (deleted)" is appended. Note that this is ambiguous. * - * Returns the buffer or an error code. + * Returns the buffer or an error code if the path was too long. + * + * "buflen" should be positive. Caller holds the dcache_lock. */ -static char *__d_path(struct dentry *dentry, struct vfsmount *vfsmnt, - struct dentry *root, struct vfsmount *rootmnt, - char *buffer, int buflen, int fail_deleted) +static char * __d_path( struct dentry *dentry, struct vfsmount *vfsmnt, + struct dentry *root, struct vfsmount *rootmnt, + char *buffer, int buflen) { - int namelen, is_slash; - - if (buflen < 2) - return ERR_PTR(-ENAMETOOLONG); - buffer += --buflen; - *buffer = '\0'; + char * end = buffer+buflen; + char * retval; + int namelen; - spin_lock(&dcache_lock); + *--end = '\0'; + buflen--; if (!IS_ROOT(dentry) && d_unhashed(dentry)) { - if (fail_deleted) { - buffer = ERR_PTR(-ENOENT); - goto out; - } - if (buflen < 10) - goto Elong; buflen -= 10; - buffer -= 10; - memcpy(buffer, " (deleted)", 10); + end -= 10; + if (buflen < 0) + goto Elong; + memcpy(end, " (deleted)", 10); } - while (dentry != root || vfsmnt != rootmnt) { + + if (buflen < 1) + goto Elong; + /* Get '/' right */ + retval = end-1; + *retval = '/'; + + for (;;) { struct dentry * parent; + if (dentry == root && vfsmnt == rootmnt) + break; if (dentry == vfsmnt->mnt_root || IS_ROOT(dentry)) { + /* Global root? */ spin_lock(&vfsmount_lock); if (vfsmnt->mnt_parent == vfsmnt) { spin_unlock(&vfsmount_lock); @@ -1787,60 +1791,33 @@ static char *__d_path(struct dentry *dentry, struct vfsmount *vfsmnt, parent = dentry->d_parent; prefetch(parent); namelen = dentry->d_name.len; - if (buflen <= namelen) - goto Elong; buflen -= namelen + 1; - buffer -= namelen; - memcpy(buffer, dentry->d_name.name, namelen); - *--buffer = '/'; + if (buflen < 0) + goto Elong; + end -= namelen; + memcpy(end, dentry->d_name.name, namelen); + *--end = '/'; + retval = end; dentry = parent; } - /* Get '/' right */ - if (*buffer != '/') - *--buffer = '/'; -out: - spin_unlock(&dcache_lock); - return buffer; + return retval; global_root: - /* - * We went past the (vfsmount, dentry) we were looking for and have - * either hit a root dentry, a lazily unmounted dentry, an - * unconnected dentry, or the file is on a pseudo filesystem. - */ namelen = dentry->d_name.len; - is_slash = (namelen == 1 && *dentry->d_name.name == '/'); - if (is_slash || (dentry->d_sb->s_flags & MS_NOUSER)) { - /* - * Make sure we won't return a pathname starting with '/'. - * - * Historically, we also glue together the root dentry and - * remaining name for pseudo filesystems like pipefs, which - * have the MS_NOUSER flag set. This results in pathnames - * like "pipe:[439336]". - */ - if (*buffer == '/') { - buffer++; - buflen++; - } - if (is_slash) - goto out; - } - if (buflen < namelen) + buflen -= namelen; + if (buflen < 0) goto Elong; - buffer -= namelen; - memcpy(buffer, dentry->d_name.name, namelen); - goto out; - + retval -= namelen-1; /* hit the slash */ + memcpy(retval, dentry->d_name.name, namelen); + return retval; Elong: - buffer = ERR_PTR(-ENAMETOOLONG); - goto out; + return ERR_PTR(-ENAMETOOLONG); } /* write full pathname into buffer and return start of pathname */ -char *d_path(struct dentry *dentry, struct vfsmount *vfsmnt, char *buf, - int buflen) +char * d_path(struct dentry *dentry, struct vfsmount *vfsmnt, + char *buf, int buflen) { char *res; struct vfsmount *rootmnt; @@ -1850,7 +1827,9 @@ char *d_path(struct dentry *dentry, struct vfsmount *vfsmnt, char *buf, rootmnt = mntget(current->fs->rootmnt); root = dget(current->fs->root); read_unlock(¤t->fs->lock); - res = __d_path(dentry, vfsmnt, root, rootmnt, buf, buflen, 0); + spin_lock(&dcache_lock); + res = __d_path(dentry, vfsmnt, root, rootmnt, buf, buflen); + spin_unlock(&dcache_lock); dput(root); mntput(rootmnt); return res; @@ -1876,10 +1855,10 @@ char *d_path(struct dentry *dentry, struct vfsmount *vfsmnt, char *buf, */ asmlinkage long sys_getcwd(char __user *buf, unsigned long size) { - int error, len; + int error; struct vfsmount *pwdmnt, *rootmnt; struct dentry *pwd, *root; - char *page = (char *) __get_free_page(GFP_USER), *cwd; + char *page = (char *) __get_free_page(GFP_USER); if (!page) return -ENOMEM; @@ -1891,18 +1870,29 @@ asmlinkage long sys_getcwd(char __user *buf, unsigned long size) root = dget(current->fs->root); read_unlock(¤t->fs->lock); - cwd = __d_path(pwd, pwdmnt, root, rootmnt, page, PAGE_SIZE, 1); - error = PTR_ERR(cwd); - if (IS_ERR(cwd)) - goto out; + error = -ENOENT; + /* Has the current directory has been unlinked? */ + spin_lock(&dcache_lock); + if (pwd->d_parent == pwd || !d_unhashed(pwd)) { + unsigned long len; + char * cwd; - error = -ERANGE; - len = PAGE_SIZE + page - cwd; - if (len <= size) { - error = len; - if (copy_to_user(buf, cwd, len)) - error = -EFAULT; - } + cwd = __d_path(pwd, pwdmnt, root, rootmnt, page, PAGE_SIZE); + spin_unlock(&dcache_lock); + + error = PTR_ERR(cwd); + if (IS_ERR(cwd)) + goto out; + + error = -ERANGE; + len = PAGE_SIZE + page - cwd; + if (len <= size) { + error = len; + if (copy_to_user(buf, cwd, len)) + error = -EFAULT; + } + } else + spin_unlock(&dcache_lock); out: dput(pwd); -- cgit v0.10.2 From 436f137975507b0baab0859a253c3c9332c22f62 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 13 Feb 2007 12:16:45 -0800 Subject: [TG3]: Save MSI state before suspend. This fixes the following problem: http://bugzilla.kernel.org/show_bug.cgi?id=7969 The MSI state needs to be saved during suspend. PCI state saved during tg3_init_one() does not contain valid MSI state because MSI hasn't been enabled. Signed-off-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index e136bae..0b5b8e7 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -12016,6 +12016,9 @@ static int tg3_suspend(struct pci_dev *pdev, pm_message_t state) tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE; tg3_full_unlock(tp); + /* Save MSI address and data for resume. */ + pci_save_state(pdev); + err = tg3_set_power_state(tp, pci_choose_state(pdev, state)); if (err) { tg3_full_lock(tp, 0); -- cgit v0.10.2 From 49afdeb65bb917e22cf9116bc31380befe9db890 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 13 Feb 2007 12:17:03 -0800 Subject: [TG3]: Use lower DMA watermark for 5703. Set DMA read watermark to 4 on 5703 in PCIX mode. This is needed to prevent some tx timeouts. Signed-off-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 0b5b8e7..2df343f 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -11314,6 +11314,7 @@ static int __devinit tg3_test_dma(struct tg3 *tp) if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) { u32 ccval = (tr32(TG3PCI_CLOCK_CTRL) & 0x1f); + u32 read_water = 0x7; /* If the 5704 is behind the EPB bridge, we can * do the less restrictive ONE_DMA workaround for @@ -11325,8 +11326,13 @@ static int __devinit tg3_test_dma(struct tg3 *tp) else if (ccval == 0x6 || ccval == 0x7) tp->dma_rwctrl |= DMA_RWCTRL_ONE_DMA; + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703) + read_water = 4; /* Set bit 23 to enable PCIX hw bug fix */ - tp->dma_rwctrl |= 0x009f0000; + tp->dma_rwctrl |= + (read_water << DMA_RWCTRL_READ_WATER_SHIFT) | + (0x3 << DMA_RWCTRL_WRITE_WATER_SHIFT) | + (1 << 23); } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) { /* 5780 always in PCIX mode */ tp->dma_rwctrl |= 0x00144000; -- cgit v0.10.2 From d4011adaf8b5ea555357a40388ee9aa7ed2daf9f Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 13 Feb 2007 12:17:25 -0800 Subject: [TG3]: 5722/5756 don't need PHY jitter workaround. Signed-off-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 2df343f..fc94b19 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -10779,7 +10779,9 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) { if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787) { - tp->tg3_flags2 |= TG3_FLG2_PHY_JITTER_BUG; + if (tp->pdev->device != PCI_DEVICE_ID_TIGON3_5756 && + tp->pdev->device != PCI_DEVICE_ID_TIGON3_5722) + tp->tg3_flags2 |= TG3_FLG2_PHY_JITTER_BUG; if (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5755M) tp->tg3_flags2 |= TG3_FLG2_PHY_ADJUST_TRIM; } else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906) -- cgit v0.10.2 From d7b0a8573c9ac8923bf6f205f4ce60dd2ac811d5 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 13 Feb 2007 12:17:38 -0800 Subject: [TG3]: 5906 doesn't need to switch to slower clock. Signed-off-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index fc94b19..b6615f1 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -1340,7 +1340,8 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state) tw32_wait_f(TG3PCI_CLOCK_CTRL, base_val | CLOCK_CTRL_ALTCLK | CLOCK_CTRL_PWRDOWN_PLL133, 40); - } else if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) { + } else if ((tp->tg3_flags2 & TG3_FLG2_5780_CLASS) || + (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)) { /* do nothing */ } else if (!((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) && (tp->tg3_flags & TG3_FLAG_ENABLE_ASF))) { -- cgit v0.10.2 From 5129724aa5de3a71fc70e71ca49d542ca1a5aa1e Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 13 Feb 2007 12:17:57 -0800 Subject: [TG3]: Power down 5704 serdes transceiver when shutting down. Signed-off-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index b6615f1..604f308 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -1175,8 +1175,18 @@ static void tg3_nvram_unlock(struct tg3 *); static void tg3_power_down_phy(struct tg3 *tp) { - if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) + if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) { + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) { + u32 sg_dig_ctrl = tr32(SG_DIG_CTRL); + u32 serdes_cfg = tr32(MAC_SERDES_CFG); + + sg_dig_ctrl |= + SG_DIG_USING_HW_AUTONEG | SG_DIG_SOFT_RESET; + tw32(SG_DIG_CTRL, sg_dig_ctrl); + tw32(MAC_SERDES_CFG, serdes_cfg | (1 << 15)); + } return; + } if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { u32 val; -- cgit v0.10.2 From 569a5df8597deeaa39867be73c7305fd82522f57 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 13 Feb 2007 12:18:15 -0800 Subject: [TG3]: Use constant for PHY register 0x1e. Signed-off-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 604f308..a1aeba2 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -6594,8 +6594,9 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) u32 tmp; /* Clear CRC stats. */ - if (!tg3_readphy(tp, 0x1e, &tmp)) { - tg3_writephy(tp, 0x1e, tmp | 0x8000); + if (!tg3_readphy(tp, MII_TG3_TEST1, &tmp)) { + tg3_writephy(tp, MII_TG3_TEST1, + tmp | MII_TG3_TEST1_CRC_EN); tg3_readphy(tp, 0x14, &tmp); } } @@ -7419,8 +7420,9 @@ static unsigned long calc_crc_errors(struct tg3 *tp) u32 val; spin_lock_bh(&tp->lock); - if (!tg3_readphy(tp, 0x1e, &val)) { - tg3_writephy(tp, 0x1e, val | 0x8000); + if (!tg3_readphy(tp, MII_TG3_TEST1, &val)) { + tg3_writephy(tp, MII_TG3_TEST1, + val | MII_TG3_TEST1_CRC_EN); tg3_readphy(tp, 0x14, &val); } else val = 0; diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 80f59ac..45d477e 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -1660,6 +1660,7 @@ #define MII_TG3_TEST1 0x1e #define MII_TG3_TEST1_TRIM_EN 0x0010 +#define MII_TG3_TEST1_CRC_EN 0x8000 /* There are two ways to manage the TX descriptors on the tigon3. * Either the descriptors are in host DMA'able memory, or they -- cgit v0.10.2 From b0408751128edc126eb37798d51891d8d0a41dc6 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 13 Feb 2007 12:18:30 -0800 Subject: [TG3]: Add some tx timeout debug messages. Print the most useful information during tx timeout to help debug. Signed-off-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index a1aeba2..159570b 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -3735,13 +3735,23 @@ out: tg3_full_unlock(tp); } +static void tg3_dump_short_state(struct tg3 *tp) +{ + printk(KERN_ERR PFX "DEBUG: MAC_TX_STATUS[%08x] MAC_RX_STATUS[%08x]\n", + tr32(MAC_TX_STATUS), tr32(MAC_RX_STATUS)); + printk(KERN_ERR PFX "DEBUG: RDMAC_STATUS[%08x] WDMAC_STATUS[%08x]\n", + tr32(RDMAC_STATUS), tr32(WDMAC_STATUS)); +} + static void tg3_tx_timeout(struct net_device *dev) { struct tg3 *tp = netdev_priv(dev); - if (netif_msg_tx_err(tp)) + if (netif_msg_tx_err(tp)) { printk(KERN_ERR PFX "%s: transmit timed out, resetting\n", dev->name); + tg3_dump_short_state(tp); + } schedule_work(&tp->reset_task); } -- cgit v0.10.2 From 65610fbab35b0570df4a9d0e77e111f85606b312 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 13 Feb 2007 12:18:46 -0800 Subject: [TG3]: Update copyright, version, and reldate. Update version to 3.73. Signed-off-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 159570b..81a1c2e 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -4,7 +4,7 @@ * Copyright (C) 2001, 2002, 2003, 2004 David S. Miller (davem@redhat.com) * Copyright (C) 2001, 2002, 2003 Jeff Garzik (jgarzik@pobox.com) * Copyright (C) 2004 Sun Microsystems Inc. - * Copyright (C) 2005 Broadcom Corporation. + * Copyright (C) 2005-2007 Broadcom Corporation. * * Firmware is: * Derived from proprietary unpublished source code, @@ -64,8 +64,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.72" -#define DRV_MODULE_RELDATE "January 8, 2007" +#define DRV_MODULE_VERSION "3.73" +#define DRV_MODULE_RELDATE "February 12, 2007" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 -- cgit v0.10.2 From bbf4a6bc8c4d59a0a9033fc2cb96ec03430c96e4 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 13 Feb 2007 12:32:58 -0800 Subject: [NETFILTER]: Clear GSO bits for TCP reset packet The TCP reset packet is copied from the original. This includes all the GSO bits which do not apply to the new packet. So we should clear those bits. Spotted by Patrick McHardy. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/net/ipv4/netfilter/ipt_REJECT.c b/net/ipv4/netfilter/ipt_REJECT.c index a9eb363..80f739e 100644 --- a/net/ipv4/netfilter/ipt_REJECT.c +++ b/net/ipv4/netfilter/ipt_REJECT.c @@ -80,6 +80,10 @@ static void send_reset(struct sk_buff *oldskb, int hook) nskb->mark = 0; skb_init_secmark(nskb); + skb_shinfo(nskb)->gso_size = 0; + skb_shinfo(nskb)->gso_segs = 0; + skb_shinfo(nskb)->gso_type = 0; + tcph = (struct tcphdr *)((u_int32_t*)nskb->nh.iph + nskb->nh.iph->ihl); /* Swap source and dest */ -- cgit v0.10.2 From a10d567c89dfba90dde2e0515e25760fd74cde06 Mon Sep 17 00:00:00 2001 From: Jarek Poplawski Date: Tue, 13 Feb 2007 12:35:26 -0800 Subject: [BRIDGE] br_if: Fix oops in port_carrier_check Signed-off-by: Jarek Poplawski Acked-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c index f35c1a3..aff6a77 100644 --- a/net/bridge/br_if.c +++ b/net/bridge/br_if.c @@ -108,6 +108,7 @@ static void port_carrier_check(struct work_struct *work) spin_unlock_bh(&br->lock); } done: + dev_put(dev); rtnl_unlock(); } @@ -161,7 +162,8 @@ static void del_nbp(struct net_bridge_port *p) dev_set_promiscuity(dev, -1); - cancel_delayed_work(&p->carrier_check); + if (cancel_delayed_work(&p->carrier_check)) + dev_put(dev); spin_lock_bh(&br->lock); br_stp_disable_port(p); @@ -444,7 +446,9 @@ int br_add_if(struct net_bridge *br, struct net_device *dev) spin_lock_bh(&br->lock); br_stp_recalculate_bridge_id(br); br_features_recompute(br); - schedule_delayed_work(&p->carrier_check, BR_PORT_DEBOUNCE); + if (schedule_delayed_work(&p->carrier_check, BR_PORT_DEBOUNCE)) + dev_hold(dev); + spin_unlock_bh(&br->lock); dev_set_mtu(br->dev, br_min_mtu(br)); diff --git a/net/bridge/br_notify.c b/net/bridge/br_notify.c index 8cd3e422..3311c4e3 100644 --- a/net/bridge/br_notify.c +++ b/net/bridge/br_notify.c @@ -56,7 +56,9 @@ static int br_device_event(struct notifier_block *unused, unsigned long event, v case NETDEV_CHANGE: if (br->dev->flags & IFF_UP) - schedule_delayed_work(&p->carrier_check, BR_PORT_DEBOUNCE); + if (schedule_delayed_work(&p->carrier_check, + BR_PORT_DEBOUNCE)) + dev_hold(dev); break; case NETDEV_FEAT_CHANGE: -- cgit v0.10.2 From 3d50f23108ff01457d1ca6fb2b5f2da8214e83e4 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 13 Feb 2007 12:36:57 -0800 Subject: [NET_SCHED]: sch_hfsc: replace ASSERT macro by WARN_ON Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c index 135087d..396deb7 100644 --- a/net/sched/sch_hfsc.c +++ b/net/sched/sch_hfsc.c @@ -71,8 +71,6 @@ #include #include -#define HFSC_DEBUG 1 - /* * kernel internal service curve representation: * coordinates are given by 64 bit unsigned integers. @@ -211,17 +209,6 @@ do { \ } while (0) #endif -#if HFSC_DEBUG -#define ASSERT(cond) \ -do { \ - if (unlikely(!(cond))) \ - printk("assertion %s failed at %s:%i (%s)\n", \ - #cond, __FILE__, __LINE__, __FUNCTION__); \ -} while (0) -#else -#define ASSERT(cond) -#endif /* HFSC_DEBUG */ - #define HT_INFINITY 0xffffffffffffffffULL /* infinite time value */ @@ -1492,7 +1479,7 @@ hfsc_schedule_watchdog(struct Qdisc *sch, u64 cur_time) if (next_time == 0 || next_time > q->root.cl_cfmin) next_time = q->root.cl_cfmin; } - ASSERT(next_time != 0); + WARN_ON(next_time == 0); delay = next_time - cur_time; delay = PSCHED_US2JIFFIE(delay); -- cgit v0.10.2 From 600ff0c24bb71482e7f0da948a931d5c5d72838a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Tue, 13 Feb 2007 12:42:11 -0800 Subject: [TCP]: Prevent pseudo garbage in SYN's advertized window MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit TCP may advertize up to 16-bits window in SYN packets (no window scaling allowed). At the same time, TCP may have rcv_wnd (32-bits) that does not fit to 16-bits without window scaling resulting in pseudo garbage into advertized window from the low-order bits of rcv_wnd. This can happen at least when mss <= (1< Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index cebe9aa..dc15113 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -481,7 +481,7 @@ static int tcp_transmit_skb(struct sock *sk, struct sk_buff *skb, int clone_it, /* RFC1323: The window in SYN & SYN/ACK segments * is never scaled. */ - th->window = htons(tp->rcv_wnd); + th->window = htons(min(tp->rcv_wnd, 65535U)); } else { th->window = htons(tcp_select_window(sk)); } @@ -2160,7 +2160,7 @@ struct sk_buff * tcp_make_synack(struct sock *sk, struct dst_entry *dst, } /* RFC1323: The window in SYN & SYN/ACK segments is never scaled. */ - th->window = htons(req->rcv_wnd); + th->window = htons(min(req->rcv_wnd, 65535U)); TCP_SKB_CB(skb)->when = tcp_time_stamp; tcp_syn_build_options((__be32 *)(th + 1), dst_metric(dst, RTAX_ADVMSS), ireq->tstamp_ok, -- cgit v0.10.2 From 30a6c337dcefa7583fe9289fedb28783af980c0c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:36:45 +0100 Subject: [POWERPC] spufs: remove SPU_CONTEXT_PREEMPT Remove the SPU_CONTEXT_PREEMPT define. It's unused and won't be used in this form after the scheduler rework. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 0941c56..9b44abe 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -37,9 +37,6 @@ enum { }; struct spu_context_ops; - -#define SPU_CONTEXT_PREEMPT 0UL - struct spu_gang; struct spu_context { -- cgit v0.10.2 From 5cb23afc9e64841adb43d46160a5c63a80ebfd54 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:36:46 +0100 Subject: [POWERPC] spufs: remove empty last line in run.c Remove the empty last line in arch/powerpc/platforms/cell/spufs/run.c. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index 1acc2ff..51b78da 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -361,4 +361,3 @@ out: up(&ctx->run_sema); return ret; } - -- cgit v0.10.2 From aa56c16807ba7b8e801216cab012d2f498755ba5 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:36:47 +0100 Subject: [POWERPC] spufs: remove superfluous SPU_STATE_SAVED assignments unbind_context already sets the context state to SPU_STATE_SAVED, thus the spu_deactivate callers don't need to do it again. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index 28c718c..dd89aa7 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -197,10 +197,8 @@ void spu_acquire_saved(struct spu_context *ctx) up_read(&ctx->state_sema); down_write(&ctx->state_sema); - if (ctx->state == SPU_STATE_RUNNABLE) { + if (ctx->state == SPU_STATE_RUNNABLE) spu_deactivate(ctx); - ctx->state = SPU_STATE_SAVED; - } downgrade_write(&ctx->state_sema); } diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index bd6fe4b..6599cba 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -315,7 +315,6 @@ void spu_yield(struct spu_context *ctx) pr_debug("%s: yielding SPU %d NODE %d\n", __FUNCTION__, spu->number, spu->node); spu_deactivate(ctx); - ctx->state = SPU_STATE_SAVED; need_yield = 1; } else { spu->prio = MAX_PRIO; -- cgit v0.10.2 From 81998bafe299b8b675157f0a4dfe8dad43215da9 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:36:48 +0100 Subject: [POWERPC] spufs: bind_context sets SPU_STATE_RUNNABLE Only bind_context/unbind_context change the spu context state. Thus we can move all assignents of SPU_STATE_RUNNABLE into bind_context, which parallels the unbind side aswell. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index dd89aa7..ccffc44 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -139,7 +139,6 @@ int spu_acquire_exclusive(struct spu_context *ctx) ret = spu_activate(ctx, 0); if (ret) goto out; - ctx->state = SPU_STATE_RUNNABLE; } else { /* We need to exclude userspace access to the context. */ spu_unmap_mappings(ctx); @@ -173,7 +172,6 @@ int spu_acquire_runnable(struct spu_context *ctx) ret = spu_activate(ctx, 0); if (ret) goto out; - ctx->state = SPU_STATE_RUNNABLE; } downgrade_write(&ctx->state_sema); diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 6599cba..7e9657e 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -118,6 +118,8 @@ static inline void bind_context(struct spu *spu, struct spu_context *ctx) spu->timestamp = jiffies; spu_cpu_affinity_set(spu, raw_smp_processor_id()); spu_switch_notify(spu, ctx); + + ctx->state = SPU_STATE_RUNNABLE; } static inline void unbind_context(struct spu *spu, struct spu_context *ctx) -- cgit v0.10.2 From 202557d29eae528f464652e92085f3b19b05a0a7 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:36:49 +0100 Subject: [POWERPC] spufs: sched.c cleanups Various cleanups to sched.c that don't change the global control flow: - add kerneldoc comments to various functions - add spu_ prefixes to various functions - add/remove context from the runqueue in bind/unbind_context as it's part of the logical operation - add a call to put_active_spu to spu_unbind_contex as it's logically part of the unbind operation Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 7e9657e..1d330f6 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -68,6 +68,43 @@ static inline int node_allowed(int node) return 1; } +/** + * spu_add_to_active_list - add spu to active list + * @spu: spu to add to the active list + */ +static void spu_add_to_active_list(struct spu *spu) +{ + mutex_lock(&spu_prio->active_mutex[spu->node]); + list_add_tail(&spu->list, &spu_prio->active_list[spu->node]); + mutex_unlock(&spu_prio->active_mutex[spu->node]); +} + +/** + * spu_remove_from_active_list - remove spu from active list + * @spu: spu to remove from the active list + * + * This function removes an spu from the active list. If the spu was + * found on the active list the function returns 1, else it doesn't do + * anything and returns 0. + */ +static int spu_remove_from_active_list(struct spu *spu) +{ + int node = spu->node; + struct spu *tmp; + int rc = 0; + + mutex_lock(&spu_prio->active_mutex[node]); + list_for_each_entry(tmp, &spu_prio->active_list[node], list) { + if (tmp == spu) { + list_del_init(&spu->list); + rc = 1; + break; + } + } + mutex_unlock(&spu_prio->active_mutex[node]); + return rc; +} + static inline void mm_needs_global_tlbie(struct mm_struct *mm) { int nr = (NR_CPUS > 1) ? NR_CPUS : NR_CPUS + 1; @@ -94,8 +131,12 @@ int spu_switch_event_unregister(struct notifier_block * n) return blocking_notifier_chain_unregister(&spu_switch_notifier, n); } - -static inline void bind_context(struct spu *spu, struct spu_context *ctx) +/** + * spu_bind_context - bind spu context to physical spu + * @spu: physical spu to bind to + * @ctx: context to bind + */ +static void spu_bind_context(struct spu *spu, struct spu_context *ctx) { pr_debug("%s: pid=%d SPU=%d NODE=%d\n", __FUNCTION__, current->pid, spu->number, spu->node); @@ -118,14 +159,24 @@ static inline void bind_context(struct spu *spu, struct spu_context *ctx) spu->timestamp = jiffies; spu_cpu_affinity_set(spu, raw_smp_processor_id()); spu_switch_notify(spu, ctx); - + spu_add_to_active_list(spu); ctx->state = SPU_STATE_RUNNABLE; } -static inline void unbind_context(struct spu *spu, struct spu_context *ctx) +/** + * spu_unbind_context - unbind spu context from physical spu + * @spu: physical spu to unbind from + * @ctx: context to unbind + * + * If the spu was on the active list the function returns 1, else 0. + */ +static int spu_unbind_context(struct spu *spu, struct spu_context *ctx) { + int was_active = spu_remove_from_active_list(spu); + pr_debug("%s: unbind pid=%d SPU=%d NODE=%d\n", __FUNCTION__, spu->pid, spu->number, spu->node); + spu_switch_notify(spu, NULL); spu_unmap_mappings(ctx); spu_save(&ctx->csa, spu); @@ -143,6 +194,8 @@ static inline void unbind_context(struct spu *spu, struct spu_context *ctx) ctx->spu = NULL; spu->flags = 0; spu->ctx = NULL; + + return was_active; } static inline void spu_add_wq(wait_queue_head_t * wq, wait_queue_t * wait, @@ -199,33 +252,6 @@ static void spu_prio_wakeup(void) } } -static int get_active_spu(struct spu *spu) -{ - int node = spu->node; - struct spu *tmp; - int rc = 0; - - mutex_lock(&spu_prio->active_mutex[node]); - list_for_each_entry(tmp, &spu_prio->active_list[node], list) { - if (tmp == spu) { - list_del_init(&spu->list); - rc = 1; - break; - } - } - mutex_unlock(&spu_prio->active_mutex[node]); - return rc; -} - -static void put_active_spu(struct spu *spu) -{ - int node = spu->node; - - mutex_lock(&spu_prio->active_mutex[node]); - list_add_tail(&spu->list, &spu_prio->active_list[node]); - mutex_unlock(&spu_prio->active_mutex[node]); -} - static struct spu *spu_get_idle(struct spu_context *ctx, u64 flags) { struct spu *spu = NULL; @@ -275,8 +301,7 @@ int spu_activate(struct spu_context *ctx, u64 flags) spu_prio_wakeup(); break; } - bind_context(spu, ctx); - put_active_spu(spu); + spu_bind_context(spu, ctx); break; } spu_prio_wait(ctx, flags); @@ -292,14 +317,13 @@ int spu_activate(struct spu_context *ctx, u64 flags) void spu_deactivate(struct spu_context *ctx) { struct spu *spu; - int needs_idle; + int was_active; spu = ctx->spu; if (!spu) return; - needs_idle = get_active_spu(spu); - unbind_context(spu, ctx); - if (needs_idle) { + was_active = spu_unbind_context(spu, ctx); + if (was_active) { spu_free(spu); spu_prio_wakeup(); } -- cgit v0.10.2 From 650f8b0291ecd0abdeadbd0ff3d70c3538e55405 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:36:50 +0100 Subject: [POWERPC] spufs: simplify state_mutex The r/w semaphore to lock the spus was overkill and can be replaced with a mutex to make it faster, simpler and easier to debug. It also helps to allow making most spufs interruptible in future patches. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index ccffc44..c9aab9b 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -42,7 +42,7 @@ struct spu_context *alloc_spu_context(struct spu_gang *gang) } spin_lock_init(&ctx->mmio_lock); kref_init(&ctx->kref); - init_rwsem(&ctx->state_sema); + mutex_init(&ctx->state_mutex); init_MUTEX(&ctx->run_sema); init_waitqueue_head(&ctx->ibox_wq); init_waitqueue_head(&ctx->wbox_wq); @@ -65,9 +65,9 @@ void destroy_spu_context(struct kref *kref) { struct spu_context *ctx; ctx = container_of(kref, struct spu_context, kref); - down_write(&ctx->state_sema); + mutex_lock(&ctx->state_mutex); spu_deactivate(ctx); - up_write(&ctx->state_sema); + mutex_unlock(&ctx->state_mutex); spu_fini_csa(&ctx->csa); if (ctx->gang) spu_gang_remove_ctx(ctx->gang, ctx); @@ -98,12 +98,12 @@ void spu_forget(struct spu_context *ctx) void spu_acquire(struct spu_context *ctx) { - down_read(&ctx->state_sema); + mutex_lock(&ctx->state_mutex); } void spu_release(struct spu_context *ctx) { - up_read(&ctx->state_sema); + mutex_unlock(&ctx->state_mutex); } void spu_unmap_mappings(struct spu_context *ctx) @@ -128,7 +128,7 @@ int spu_acquire_exclusive(struct spu_context *ctx) { int ret = 0; - down_write(&ctx->state_sema); + mutex_lock(&ctx->state_mutex); /* ctx is about to be freed, can't acquire any more */ if (!ctx->owner) { ret = -EINVAL; @@ -146,7 +146,7 @@ int spu_acquire_exclusive(struct spu_context *ctx) out: if (ret) - up_write(&ctx->state_sema); + mutex_unlock(&ctx->state_mutex); return ret; } @@ -154,14 +154,12 @@ int spu_acquire_runnable(struct spu_context *ctx) { int ret = 0; - down_read(&ctx->state_sema); + mutex_lock(&ctx->state_mutex); if (ctx->state == SPU_STATE_RUNNABLE) { ctx->spu->prio = current->prio; return 0; } - up_read(&ctx->state_sema); - down_write(&ctx->state_sema); /* ctx is about to be freed, can't acquire any more */ if (!ctx->owner) { ret = -EINVAL; @@ -174,29 +172,18 @@ int spu_acquire_runnable(struct spu_context *ctx) goto out; } - downgrade_write(&ctx->state_sema); /* On success, we return holding the lock */ - return ret; out: /* Release here, to simplify calling code. */ - up_write(&ctx->state_sema); + mutex_unlock(&ctx->state_mutex); return ret; } void spu_acquire_saved(struct spu_context *ctx) { - down_read(&ctx->state_sema); - - if (ctx->state == SPU_STATE_SAVED) - return; - - up_read(&ctx->state_sema); - down_write(&ctx->state_sema); - + mutex_lock(&ctx->state_mutex); if (ctx->state == SPU_STATE_RUNNABLE) spu_deactivate(ctx); - - downgrade_write(&ctx->state_sema); } diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 1d330f6..c61a34b 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -233,11 +233,11 @@ static void spu_prio_wait(struct spu_context *ctx, u64 flags) spu_add_wq(wq, &wait, prio); if (!signal_pending(current)) { - up_write(&ctx->state_sema); + mutex_unlock(&ctx->state_mutex); pr_debug("%s: pid=%d prio=%d\n", __FUNCTION__, current->pid, current->prio); schedule(); - down_write(&ctx->state_sema); + mutex_lock(&ctx->state_mutex); } spu_del_wq(wq, &wait, prio); @@ -334,7 +334,7 @@ void spu_yield(struct spu_context *ctx) struct spu *spu; int need_yield = 0; - if (down_write_trylock(&ctx->state_sema)) { + if (mutex_trylock(&ctx->state_mutex)) { if ((spu = ctx->spu) != NULL) { int best = sched_find_first_bit(spu_prio->bitmap); if (best < MAX_PRIO) { @@ -346,7 +346,7 @@ void spu_yield(struct spu_context *ctx) spu->prio = MAX_PRIO; } } - up_write(&ctx->state_sema); + mutex_unlock(&ctx->state_mutex); } if (unlikely(need_yield)) yield(); diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 9b44abe..de2401a 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -23,7 +23,7 @@ #define SPUFS_H #include -#include +#include #include #include @@ -53,7 +53,7 @@ struct spu_context { u64 object_id; /* user space pointer for oprofile */ enum { SPU_STATE_RUNNABLE, SPU_STATE_SAVED } state; - struct rw_semaphore state_sema; + struct mutex state_mutex; struct semaphore run_sema; struct mm_struct *owner; @@ -173,7 +173,7 @@ int spu_acquire_exclusive(struct spu_context *ctx); static inline void spu_release_exclusive(struct spu_context *ctx) { - up_write(&ctx->state_sema); + mutex_unlock(&ctx->state_mutex); } int spu_activate(struct spu_context *ctx, u64 flags); -- cgit v0.10.2 From c0d56408e3ff52d635441e0f08d12164a63728cf Mon Sep 17 00:00:00 2001 From: Kazunori MIYAZAWA Date: Tue, 13 Feb 2007 12:54:47 -0800 Subject: [IPSEC]: Changing API of xfrm4_tunnel_register. This patch changes xfrm4_tunnel register and deregister interface to prepare for solving the conflict of device tunnels with inter address family IPsec tunnel. Signed-off-by: Kazunori MIYAZAWA Signed-off-by: David S. Miller diff --git a/include/net/xfrm.h b/include/net/xfrm.h index 16924cb..20be8be 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -946,8 +946,8 @@ extern int xfrm_state_mtu(struct xfrm_state *x, int mtu); extern int xfrm_init_state(struct xfrm_state *x); extern int xfrm4_rcv(struct sk_buff *skb); extern int xfrm4_output(struct sk_buff *skb); -extern int xfrm4_tunnel_register(struct xfrm_tunnel *handler); -extern int xfrm4_tunnel_deregister(struct xfrm_tunnel *handler); +extern int xfrm4_tunnel_register(struct xfrm_tunnel *handler, unsigned short family); +extern int xfrm4_tunnel_deregister(struct xfrm_tunnel *handler, unsigned short family); extern int xfrm6_rcv_spi(struct sk_buff *skb, __be32 spi); extern int xfrm6_rcv(struct sk_buff **pskb); extern int xfrm6_input_addr(struct sk_buff *skb, xfrm_address_t *daddr, diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c index 475bcd1..9b561e6 100644 --- a/net/ipv4/ipip.c +++ b/net/ipv4/ipip.c @@ -871,7 +871,7 @@ static int __init ipip_init(void) printk(banner); - if (xfrm4_tunnel_register(&ipip_handler)) { + if (xfrm4_tunnel_register(&ipip_handler, AF_INET)) { printk(KERN_INFO "ipip init: can't register tunnel\n"); return -EAGAIN; } @@ -893,7 +893,7 @@ static int __init ipip_init(void) err2: free_netdev(ipip_fb_tunnel_dev); err1: - xfrm4_tunnel_deregister(&ipip_handler); + xfrm4_tunnel_deregister(&ipip_handler, AF_INET); goto out; } @@ -913,7 +913,7 @@ static void __exit ipip_destroy_tunnels(void) static void __exit ipip_fini(void) { - if (xfrm4_tunnel_deregister(&ipip_handler)) + if (xfrm4_tunnel_deregister(&ipip_handler, AF_INET)) printk(KERN_INFO "ipip close: can't deregister tunnel\n"); rtnl_lock(); diff --git a/net/ipv4/tunnel4.c b/net/ipv4/tunnel4.c index 8d30c48..a794a8c 100644 --- a/net/ipv4/tunnel4.c +++ b/net/ipv4/tunnel4.c @@ -14,9 +14,10 @@ #include static struct xfrm_tunnel *tunnel4_handlers; +static struct xfrm_tunnel *tunnel64_handlers; static DEFINE_MUTEX(tunnel4_mutex); -int xfrm4_tunnel_register(struct xfrm_tunnel *handler) +int xfrm4_tunnel_register(struct xfrm_tunnel *handler, unsigned short family) { struct xfrm_tunnel **pprev; int ret = -EEXIST; @@ -24,7 +25,8 @@ int xfrm4_tunnel_register(struct xfrm_tunnel *handler) mutex_lock(&tunnel4_mutex); - for (pprev = &tunnel4_handlers; *pprev; pprev = &(*pprev)->next) { + for (pprev = (family == AF_INET) ? &tunnel4_handlers : &tunnel64_handlers; + *pprev; pprev = &(*pprev)->next) { if ((*pprev)->priority > priority) break; if ((*pprev)->priority == priority) @@ -44,14 +46,15 @@ err: EXPORT_SYMBOL(xfrm4_tunnel_register); -int xfrm4_tunnel_deregister(struct xfrm_tunnel *handler) +int xfrm4_tunnel_deregister(struct xfrm_tunnel *handler, unsigned short family) { struct xfrm_tunnel **pprev; int ret = -ENOENT; mutex_lock(&tunnel4_mutex); - for (pprev = &tunnel4_handlers; *pprev; pprev = &(*pprev)->next) { + for (pprev = (family == AF_INET) ? &tunnel4_handlers : &tunnel64_handlers; + *pprev; pprev = &(*pprev)->next) { if (*pprev == handler) { *pprev = handler->next; ret = 0; @@ -86,6 +89,26 @@ drop: return 0; } +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) +static int tunnel64_rcv(struct sk_buff *skb) +{ + struct xfrm_tunnel *handler; + + if (!pskb_may_pull(skb, sizeof(struct iphdr))) + goto drop; + + for (handler = tunnel64_handlers; handler; handler = handler->next) + if (!handler->handler(skb)) + return 0; + + icmp_send(skb, ICMP_DEST_UNREACH, ICMP_PORT_UNREACH, 0); + +drop: + kfree_skb(skb); + return 0; +} +#endif + static void tunnel4_err(struct sk_buff *skb, u32 info) { struct xfrm_tunnel *handler; @@ -101,17 +124,36 @@ static struct net_protocol tunnel4_protocol = { .no_policy = 1, }; +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) +static struct net_protocol tunnel64_protocol = { + .handler = tunnel64_rcv, + .err_handler = tunnel4_err, + .no_policy = 1, +}; +#endif + static int __init tunnel4_init(void) { if (inet_add_protocol(&tunnel4_protocol, IPPROTO_IPIP)) { printk(KERN_ERR "tunnel4 init: can't add protocol\n"); return -EAGAIN; } +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) + if (inet_add_protocol(&tunnel64_protocol, IPPROTO_IPV6)) { + printk(KERN_ERR "tunnel64 init: can't add protocol\n"); + inet_del_protocol(&tunnel4_protocol, IPPROTO_IPIP); + return -EAGAIN; + } +#endif return 0; } static void __exit tunnel4_fini(void) { +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) + if (inet_del_protocol(&tunnel64_protocol, IPPROTO_IPV6)) + printk(KERN_ERR "tunnel64 close: can't remove protocol\n"); +#endif if (inet_del_protocol(&tunnel4_protocol, IPPROTO_IPIP)) printk(KERN_ERR "tunnel4 close: can't remove protocol\n"); } diff --git a/net/ipv4/xfrm4_input.c b/net/ipv4/xfrm4_input.c index 289146b..78e80de 100644 --- a/net/ipv4/xfrm4_input.c +++ b/net/ipv4/xfrm4_input.c @@ -27,6 +27,7 @@ static int xfrm4_parse_spi(struct sk_buff *skb, u8 nexthdr, __be32 *spi, __be32 { switch (nexthdr) { case IPPROTO_IPIP: + case IPPROTO_IPV6: *spi = skb->nh.iph->saddr; *seq = 0; return 0; @@ -70,7 +71,8 @@ int xfrm4_rcv_encap(struct sk_buff *skb, __u16 encap_type) if (xfrm_nr == XFRM_MAX_DEPTH) goto drop; - x = xfrm_state_lookup((xfrm_address_t *)&iph->daddr, spi, iph->protocol, AF_INET); + x = xfrm_state_lookup((xfrm_address_t *)&iph->daddr, spi, + iph->protocol != IPPROTO_IPV6 ? iph->protocol : IPPROTO_IPIP, AF_INET); if (x == NULL) goto drop; diff --git a/net/ipv4/xfrm4_tunnel.c b/net/ipv4/xfrm4_tunnel.c index 1be6762..3eef064 100644 --- a/net/ipv4/xfrm4_tunnel.c +++ b/net/ipv4/xfrm4_tunnel.c @@ -64,24 +64,45 @@ static struct xfrm_tunnel xfrm_tunnel_handler = { .priority = 2, }; +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) +static struct xfrm_tunnel xfrm64_tunnel_handler = { + .handler = xfrm4_rcv, + .err_handler = xfrm_tunnel_err, + .priority = 2, +}; +#endif + static int __init ipip_init(void) { if (xfrm_register_type(&ipip_type, AF_INET) < 0) { printk(KERN_INFO "ipip init: can't add xfrm type\n"); return -EAGAIN; } - if (xfrm4_tunnel_register(&xfrm_tunnel_handler)) { - printk(KERN_INFO "ipip init: can't add xfrm handler\n"); + + if (xfrm4_tunnel_register(&xfrm_tunnel_handler, AF_INET)) { + printk(KERN_INFO "ipip init: can't add xfrm handler for AF_INET\n"); + xfrm_unregister_type(&ipip_type, AF_INET); + return -EAGAIN; + } +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) + if (xfrm4_tunnel_register(&xfrm64_tunnel_handler, AF_INET6)) { + printk(KERN_INFO "ipip init: can't add xfrm handler for AF_INET6\n"); + xfrm4_tunnel_deregister(&xfrm_tunnel_handler, AF_INET); xfrm_unregister_type(&ipip_type, AF_INET); return -EAGAIN; } +#endif return 0; } static void __exit ipip_fini(void) { - if (xfrm4_tunnel_deregister(&xfrm_tunnel_handler)) - printk(KERN_INFO "ipip close: can't remove xfrm handler\n"); +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) + if (xfrm4_tunnel_deregister(&xfrm64_tunnel_handler, AF_INET6)) + printk(KERN_INFO "ipip close: can't remove xfrm handler for AF_INET6\n"); +#endif + if (xfrm4_tunnel_deregister(&xfrm_tunnel_handler, AF_INET)) + printk(KERN_INFO "ipip close: can't remove xfrm handler for AF_INET\n"); if (xfrm_unregister_type(&ipip_type, AF_INET) < 0) printk(KERN_INFO "ipip close: can't remove xfrm type\n"); } -- cgit v0.10.2 From c73cb5a2d607b5b95a06a54d8291ddb659b348b6 Mon Sep 17 00:00:00 2001 From: Kazunori MIYAZAWA Date: Tue, 13 Feb 2007 12:55:25 -0800 Subject: [IPSEC]: make sit use the xfrm4_tunnel_register This patch makes sit use xfrm4_tunnel_register instead of inet_add_protocol. It solves conflict of sit device with inter address family IPsec tunnel. Signed-off-by: Kazunori MIYAZAWA Signed-off-by: David S. Miller diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig index deb4101..79682ef 100644 --- a/net/ipv6/Kconfig +++ b/net/ipv6/Kconfig @@ -156,6 +156,7 @@ config INET6_XFRM_MODE_ROUTEOPTIMIZATION config IPV6_SIT tristate "IPv6: IPv6-in-IPv4 tunnel (SIT driver)" depends on IPV6 + select INET_TUNNEL default y ---help--- Tunneling means encapsulating data of one protocol type within diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c index 4d3cf30..862ed7c 100644 --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -216,7 +216,7 @@ static void ipip6_tunnel_uninit(struct net_device *dev) } -static void ipip6_err(struct sk_buff *skb, u32 info) +static int ipip6_err(struct sk_buff *skb, u32 info) { #ifndef I_WISH_WORLD_WERE_PERFECT @@ -228,21 +228,22 @@ static void ipip6_err(struct sk_buff *skb, u32 info) int type = skb->h.icmph->type; int code = skb->h.icmph->code; struct ip_tunnel *t; + int err; switch (type) { default: case ICMP_PARAMETERPROB: - return; + return 0; case ICMP_DEST_UNREACH: switch (code) { case ICMP_SR_FAILED: case ICMP_PORT_UNREACH: /* Impossible event. */ - return; + return 0; case ICMP_FRAG_NEEDED: /* Soft state for pmtu is maintained by IP core. */ - return; + return 0; default: /* All others are translated to HOST_UNREACH. rfc2003 contains "deep thoughts" about NET_UNREACH, @@ -253,14 +254,18 @@ static void ipip6_err(struct sk_buff *skb, u32 info) break; case ICMP_TIME_EXCEEDED: if (code != ICMP_EXC_TTL) - return; + return 0; break; } + err = -ENOENT; + read_lock(&ipip6_lock); t = ipip6_tunnel_lookup(iph->daddr, iph->saddr); if (t == NULL || t->parms.iph.daddr == 0) goto out; + + err = 0; if (t->parms.iph.ttl == 0 && type == ICMP_TIME_EXCEEDED) goto out; @@ -271,7 +276,7 @@ static void ipip6_err(struct sk_buff *skb, u32 info) t->err_time = jiffies; out: read_unlock(&ipip6_lock); - return; + return err; #else struct iphdr *iph = (struct iphdr*)dp; int hlen = iph->ihl<<2; @@ -332,7 +337,7 @@ out: /* Prepare fake skb to feed it to icmpv6_send */ skb2 = skb_clone(skb, GFP_ATOMIC); if (skb2 == NULL) - return; + return 0; dst_release(skb2->dst); skb2->dst = NULL; skb_pull(skb2, skb->data - (u8*)iph6); @@ -355,7 +360,7 @@ out: } } kfree_skb(skb2); - return; + return 0; #endif } @@ -791,9 +796,10 @@ static int __init ipip6_fb_tunnel_init(struct net_device *dev) return 0; } -static struct net_protocol sit_protocol = { +static struct xfrm_tunnel sit_handler = { .handler = ipip6_rcv, .err_handler = ipip6_err, + .priority = 1, }; static void __exit sit_destroy_tunnels(void) @@ -812,7 +818,7 @@ static void __exit sit_destroy_tunnels(void) static void __exit sit_cleanup(void) { - inet_del_protocol(&sit_protocol, IPPROTO_IPV6); + xfrm4_tunnel_deregister(&sit_handler, AF_INET6); rtnl_lock(); sit_destroy_tunnels(); @@ -826,7 +832,7 @@ static int __init sit_init(void) printk(KERN_INFO "IPv6 over IPv4 tunneling driver\n"); - if (inet_add_protocol(&sit_protocol, IPPROTO_IPV6) < 0) { + if (xfrm4_tunnel_register(&sit_handler, AF_INET6) < 0) { printk(KERN_INFO "sit init: Can't add protocol\n"); return -EAGAIN; } @@ -848,7 +854,7 @@ static int __init sit_init(void) err2: free_netdev(ipip6_fb_tunnel_dev); err1: - inet_del_protocol(&sit_protocol, IPPROTO_IPV6); + xfrm4_tunnel_deregister(&sit_handler, AF_INET6); goto out; } -- cgit v0.10.2 From 6a0641e51011def4e308fd07387047f5ee50647f Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:54:21 +0100 Subject: [POWERPC] spufs: state_mutex cleanup Various cleanups in code surrounding the state semaphore: - inline spu_acquire/spu_release - cleanup spu_acquire_* and add kerneldoc comments to these functions - remove spu_release_exclusive and replace it with spu_release Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index c9aab9b..f2630dc 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -96,16 +96,6 @@ void spu_forget(struct spu_context *ctx) spu_release(ctx); } -void spu_acquire(struct spu_context *ctx) -{ - mutex_lock(&ctx->state_mutex); -} - -void spu_release(struct spu_context *ctx) -{ - mutex_unlock(&ctx->state_mutex); -} - void spu_unmap_mappings(struct spu_context *ctx) { if (ctx->local_store) @@ -124,66 +114,85 @@ void spu_unmap_mappings(struct spu_context *ctx) unmap_mapping_range(ctx->psmap, 0, 0x20000, 1); } +/** + * spu_acquire_exclusive - lock spu contex and protect against userspace access + * @ctx: spu contex to lock + * + * Note: + * Returns 0 and with the context locked on success + * Returns negative error and with the context _unlocked_ on failure. + */ int spu_acquire_exclusive(struct spu_context *ctx) { - int ret = 0; + int ret = -EINVAL; - mutex_lock(&ctx->state_mutex); - /* ctx is about to be freed, can't acquire any more */ - if (!ctx->owner) { - ret = -EINVAL; - goto out; - } + spu_acquire(ctx); + /* + * Context is about to be freed, so we can't acquire it anymore. + */ + if (!ctx->owner) + goto out_unlock; if (ctx->state == SPU_STATE_SAVED) { ret = spu_activate(ctx, 0); if (ret) - goto out; + goto out_unlock; } else { - /* We need to exclude userspace access to the context. */ + /* + * We need to exclude userspace access to the context. + * + * To protect against memory access we invalidate all ptes + * and make sure the pagefault handlers block on the mutex. + */ spu_unmap_mappings(ctx); } -out: - if (ret) - mutex_unlock(&ctx->state_mutex); + return 0; + + out_unlock: + spu_release(ctx); return ret; } +/** + * spu_acquire_runnable - lock spu contex and make sure it is in runnable state + * @ctx: spu contex to lock + * + * Note: + * Returns 0 and with the context locked on success + * Returns negative error and with the context _unlocked_ on failure. + */ int spu_acquire_runnable(struct spu_context *ctx) { - int ret = 0; - - mutex_lock(&ctx->state_mutex); - if (ctx->state == SPU_STATE_RUNNABLE) { - ctx->spu->prio = current->prio; - return 0; - } - - /* ctx is about to be freed, can't acquire any more */ - if (!ctx->owner) { - ret = -EINVAL; - goto out; - } + int ret = -EINVAL; + spu_acquire(ctx); if (ctx->state == SPU_STATE_SAVED) { + /* + * Context is about to be freed, so we can't acquire it anymore. + */ + if (!ctx->owner) + goto out_unlock; ret = spu_activate(ctx, 0); if (ret) - goto out; - } + goto out_unlock; + } else + ctx->spu->prio = current->prio; - /* On success, we return holding the lock */ - return ret; -out: - /* Release here, to simplify calling code. */ - mutex_unlock(&ctx->state_mutex); + return 0; + out_unlock: + spu_release(ctx); return ret; } +/** + * spu_acquire_saved - lock spu contex and make sure it is in saved state + * @ctx: spu contex to lock + */ void spu_acquire_saved(struct spu_context *ctx) { - mutex_lock(&ctx->state_mutex); - if (ctx->state == SPU_STATE_RUNNABLE) + spu_acquire(ctx); + if (ctx->state != SPU_STATE_SAVED) spu_deactivate(ctx); } diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index 51b78da..e164731 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -133,7 +133,7 @@ out_drop_priv: spu_mfc_sr1_set(ctx->spu, sr1); out_unlock: - spu_release_exclusive(ctx); + spu_release(ctx); out: return ret; } diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index de2401a..fa07ec2 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -158,6 +158,16 @@ void spu_gang_remove_ctx(struct spu_gang *gang, struct spu_context *ctx); void spu_gang_add_ctx(struct spu_gang *gang, struct spu_context *ctx); /* context management */ +static inline void spu_acquire(struct spu_context *ctx) +{ + mutex_lock(&ctx->state_mutex); +} + +static inline void spu_release(struct spu_context *ctx) +{ + mutex_unlock(&ctx->state_mutex); +} + struct spu_context * alloc_spu_context(struct spu_gang *gang); void destroy_spu_context(struct kref *kref); struct spu_context * get_spu_context(struct spu_context *ctx); @@ -165,17 +175,9 @@ int put_spu_context(struct spu_context *ctx); void spu_unmap_mappings(struct spu_context *ctx); void spu_forget(struct spu_context *ctx); -void spu_acquire(struct spu_context *ctx); -void spu_release(struct spu_context *ctx); int spu_acquire_runnable(struct spu_context *ctx); void spu_acquire_saved(struct spu_context *ctx); int spu_acquire_exclusive(struct spu_context *ctx); - -static inline void spu_release_exclusive(struct spu_context *ctx) -{ - mutex_unlock(&ctx->state_mutex); -} - int spu_activate(struct spu_context *ctx, u64 flags); void spu_deactivate(struct spu_context *ctx); void spu_yield(struct spu_context *ctx); -- cgit v0.10.2 From 8389998ae9ea2888c86c446f7911ddced50052a1 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:54:22 +0100 Subject: [POWERPC] spufs: move prio to spu_context It doesn't make any sense to have a priority field in the physical spu structure. Move it into the spu context instead. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index f2630dc..88a8871 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -53,6 +53,7 @@ struct spu_context *alloc_spu_context(struct spu_gang *gang) ctx->owner = get_task_mm(current); if (gang) spu_gang_add_ctx(gang, ctx); + ctx->prio = current->prio; goto out; out_free: kfree(ctx); @@ -176,8 +177,7 @@ int spu_acquire_runnable(struct spu_context *ctx) ret = spu_activate(ctx, 0); if (ret) goto out_unlock; - } else - ctx->spu->prio = current->prio; + } return 0; diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index c61a34b..03b357c 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -145,7 +145,6 @@ static void spu_bind_context(struct spu *spu, struct spu_context *ctx) ctx->spu = spu; ctx->ops = &spu_hw_ops; spu->pid = current->pid; - spu->prio = current->prio; spu->mm = ctx->owner; mm_needs_global_tlbie(spu->mm); spu->ibox_callback = spufs_ibox_callback; @@ -189,7 +188,6 @@ static int spu_unbind_context(struct spu *spu, struct spu_context *ctx) spu->dma_callback = NULL; spu->mm = NULL; spu->pid = 0; - spu->prio = MAX_PRIO; ctx->ops = &spu_backing_ops; ctx->spu = NULL; spu->flags = 0; @@ -223,7 +221,7 @@ static inline void spu_del_wq(wait_queue_head_t * wq, wait_queue_t * wait, static void spu_prio_wait(struct spu_context *ctx, u64 flags) { - int prio = current->prio; + int prio = ctx->prio; wait_queue_head_t *wq = &spu_prio->waitq[prio]; DEFINE_WAIT(wait); @@ -342,8 +340,6 @@ void spu_yield(struct spu_context *ctx) __FUNCTION__, spu->number, spu->node); spu_deactivate(ctx); need_yield = 1; - } else { - spu->prio = MAX_PRIO; } } mutex_unlock(&ctx->state_mutex); diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index fa07ec2..b500e94 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -74,6 +74,9 @@ struct spu_context { struct list_head gang_list; struct spu_gang *gang; + + /* scheduler fields */ + int prio; }; struct spu_gang { diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 77540a2..0183e5f 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -2811,7 +2811,6 @@ static void dump_spu_fields(struct spu *spu) DUMP_FIELD(spu, "0x%lx", irqs[2]); DUMP_FIELD(spu, "0x%x", slb_replace); DUMP_FIELD(spu, "%d", pid); - DUMP_FIELD(spu, "%d", prio); DUMP_FIELD(spu, "0x%p", mm); DUMP_FIELD(spu, "0x%p", ctx); DUMP_FIELD(spu, "0x%p", rq); diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h index b634e16..0f9f2dd2 100644 --- a/include/asm-powerpc/spu.h +++ b/include/asm-powerpc/spu.h @@ -129,7 +129,6 @@ struct spu { struct spu_runqueue *rq; unsigned long long timestamp; pid_t pid; - int prio; int class_0_pending; spinlock_t register_lock; -- cgit v0.10.2 From 079cdb61614c466c939ebf74c7ef6745667bc61e Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:54:23 +0100 Subject: [POWERPC] spufs: runqueue simplification This is the biggest patch in this series, and it reworks the guts of the spu scheduler runqueue mechanism: - instead of embedding a waitqueue in the runqueue there is now a simple doubly-linked list, the actual wakeups happen by reusing the stop_wq in the spu context (maybe we should rename it one day) - spu_free and spu_prio_wakeup are merged into a single spu_reschedule function - various functionality is split out into small helpers, and kerneldoc comments are added in various places to document what's going on. - spu_activate is rewritten into a tight loop by removing test for various impossible conditions and using the infrastructure in this patch. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 03b357c..6f8e225 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -49,7 +49,8 @@ #define SPU_BITMAP_SIZE (((MAX_PRIO+BITS_PER_LONG)/BITS_PER_LONG)+1) struct spu_prio_array { unsigned long bitmap[SPU_BITMAP_SIZE]; - wait_queue_head_t waitq[MAX_PRIO]; + struct list_head runq[MAX_PRIO]; + spinlock_t runq_lock; struct list_head active_list[MAX_NUMNODES]; struct mutex active_mutex[MAX_NUMNODES]; }; @@ -196,61 +197,91 @@ static int spu_unbind_context(struct spu *spu, struct spu_context *ctx) return was_active; } -static inline void spu_add_wq(wait_queue_head_t * wq, wait_queue_t * wait, - int prio) +/** + * spu_add_to_rq - add a context to the runqueue + * @ctx: context to add + */ +static void spu_add_to_rq(struct spu_context *ctx) { - prepare_to_wait_exclusive(wq, wait, TASK_INTERRUPTIBLE); - set_bit(prio, spu_prio->bitmap); + spin_lock(&spu_prio->runq_lock); + list_add_tail(&ctx->rq, &spu_prio->runq[ctx->prio]); + set_bit(ctx->prio, spu_prio->bitmap); + spin_unlock(&spu_prio->runq_lock); } -static inline void spu_del_wq(wait_queue_head_t * wq, wait_queue_t * wait, - int prio) +/** + * spu_del_from_rq - remove a context from the runqueue + * @ctx: context to remove + */ +static void spu_del_from_rq(struct spu_context *ctx) { - u64 flags; - - __set_current_state(TASK_RUNNING); - - spin_lock_irqsave(&wq->lock, flags); + spin_lock(&spu_prio->runq_lock); + list_del_init(&ctx->rq); + if (list_empty(&spu_prio->runq[ctx->prio])) + clear_bit(ctx->prio, spu_prio->bitmap); + spin_unlock(&spu_prio->runq_lock); +} - remove_wait_queue_locked(wq, wait); - if (list_empty(&wq->task_list)) - clear_bit(prio, spu_prio->bitmap); +/** + * spu_grab_context - remove one context from the runqueue + * @prio: priority of the context to be removed + * + * This function removes one context from the runqueue for priority @prio. + * If there is more than one context with the given priority the first + * task on the runqueue will be taken. + * + * Returns the spu_context it just removed. + * + * Must be called with spu_prio->runq_lock held. + */ +static struct spu_context *spu_grab_context(int prio) +{ + struct list_head *rq = &spu_prio->runq[prio]; - spin_unlock_irqrestore(&wq->lock, flags); + if (list_empty(rq)) + return NULL; + return list_entry(rq->next, struct spu_context, rq); } -static void spu_prio_wait(struct spu_context *ctx, u64 flags) +static void spu_prio_wait(struct spu_context *ctx) { - int prio = ctx->prio; - wait_queue_head_t *wq = &spu_prio->waitq[prio]; DEFINE_WAIT(wait); - if (ctx->spu) - return; - - spu_add_wq(wq, &wait, prio); + prepare_to_wait_exclusive(&ctx->stop_wq, &wait, TASK_INTERRUPTIBLE); if (!signal_pending(current)) { mutex_unlock(&ctx->state_mutex); - pr_debug("%s: pid=%d prio=%d\n", __FUNCTION__, - current->pid, current->prio); schedule(); mutex_lock(&ctx->state_mutex); } - - spu_del_wq(wq, &wait, prio); + __set_current_state(TASK_RUNNING); + remove_wait_queue(&ctx->stop_wq, &wait); } -static void spu_prio_wakeup(void) +/** + * spu_reschedule - try to find a runnable context for a spu + * @spu: spu available + * + * This function is called whenever a spu becomes idle. It looks for the + * most suitable runnable spu context and schedules it for execution. + */ +static void spu_reschedule(struct spu *spu) { - int best = sched_find_first_bit(spu_prio->bitmap); + int best; + + spu_free(spu); + + spin_lock(&spu_prio->runq_lock); + best = sched_find_first_bit(spu_prio->bitmap); if (best < MAX_PRIO) { - wait_queue_head_t *wq = &spu_prio->waitq[best]; - wake_up_interruptible_nr(wq, 1); + struct spu_context *ctx = spu_grab_context(best); + if (ctx) + wake_up(&ctx->stop_wq); } + spin_unlock(&spu_prio->runq_lock); } -static struct spu *spu_get_idle(struct spu_context *ctx, u64 flags) +static struct spu *spu_get_idle(struct spu_context *ctx) { struct spu *spu = NULL; int node = cpu_to_node(raw_smp_processor_id()); @@ -267,15 +298,6 @@ static struct spu *spu_get_idle(struct spu_context *ctx, u64 flags) return spu; } -static inline struct spu *spu_get(struct spu_context *ctx, u64 flags) -{ - /* Future: spu_get_idle() if possible, - * otherwise try to preempt an active - * context. - */ - return spu_get_idle(ctx, flags); -} - /* The three externally callable interfaces * for the scheduler begin here. * @@ -284,32 +306,36 @@ static inline struct spu *spu_get(struct spu_context *ctx, u64 flags) * spu_yield - yield an SPU if others are waiting. */ +/** + * spu_activate - find a free spu for a context and execute it + * @ctx: spu context to schedule + * @flags: flags (currently ignored) + * + * Tries to find a free spu to run @ctx. If no free spu is availble + * add the context to the runqueue so it gets woken up once an spu + * is available. + */ int spu_activate(struct spu_context *ctx, u64 flags) { - struct spu *spu; - int ret = 0; - for (;;) { - if (ctx->spu) - return 0; - spu = spu_get(ctx, flags); - if (spu != NULL) { - if (ctx->spu != NULL) { - spu_free(spu); - spu_prio_wakeup(); - break; - } + if (ctx->spu) + return 0; + + do { + struct spu *spu; + + spu = spu_get_idle(ctx); + if (spu) { spu_bind_context(spu, ctx); - break; - } - spu_prio_wait(ctx, flags); - if (signal_pending(current)) { - ret = -ERESTARTSYS; - spu_prio_wakeup(); - break; + return 0; } - } - return ret; + + spu_add_to_rq(ctx); + spu_prio_wait(ctx); + spu_del_from_rq(ctx); + } while (!signal_pending(current)); + + return -ERESTARTSYS; } void spu_deactivate(struct spu_context *ctx) @@ -321,10 +347,8 @@ void spu_deactivate(struct spu_context *ctx) if (!spu) return; was_active = spu_unbind_context(spu, ctx); - if (was_active) { - spu_free(spu); - spu_prio_wakeup(); - } + if (was_active) + spu_reschedule(spu); } void spu_yield(struct spu_context *ctx) @@ -359,7 +383,7 @@ int __init spu_sched_init(void) return 1; } for (i = 0; i < MAX_PRIO; i++) { - init_waitqueue_head(&spu_prio->waitq[i]); + INIT_LIST_HEAD(&spu_prio->runq[i]); __clear_bit(i, spu_prio->bitmap); } __set_bit(MAX_PRIO, spu_prio->bitmap); @@ -367,6 +391,7 @@ int __init spu_sched_init(void) mutex_init(&spu_prio->active_mutex[i]); INIT_LIST_HEAD(&spu_prio->active_list[i]); } + spin_lock_init(&spu_prio->runq_lock); return 0; } diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index b500e94..7f5a4fc 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -76,6 +76,7 @@ struct spu_context { struct spu_gang *gang; /* scheduler fields */ + struct list_head rq; int prio; }; -- cgit v0.10.2 From 26bec67386dbf6ef887254e815398842e182cdcd Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:54:24 +0100 Subject: [POWERPC] spufs: optimize spu_run There is no need to directly wake up contexts in spu_activate when called from spu_run, so add a flag to surpress this wakeup. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index 88a8871..056a8ad 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -163,7 +163,7 @@ int spu_acquire_exclusive(struct spu_context *ctx) * Returns 0 and with the context locked on success * Returns negative error and with the context _unlocked_ on failure. */ -int spu_acquire_runnable(struct spu_context *ctx) +int spu_acquire_runnable(struct spu_context *ctx, unsigned long flags) { int ret = -EINVAL; @@ -174,7 +174,7 @@ int spu_acquire_runnable(struct spu_context *ctx) */ if (!ctx->owner) goto out_unlock; - ret = spu_activate(ctx, 0); + ret = spu_activate(ctx, flags); if (ret) goto out_unlock; } diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index a528020..c729813 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -164,7 +164,7 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma, /* error here usually means a signal.. we might want to test * the error code more precisely though */ - ret = spu_acquire_runnable(ctx); + ret = spu_acquire_runnable(ctx, 0); if (ret) return NOPFN_REFAULT; @@ -1306,7 +1306,7 @@ static ssize_t spufs_mfc_write(struct file *file, const char __user *buffer, if (ret) goto out; - spu_acquire_runnable(ctx); + spu_acquire_runnable(ctx, 0); if (file->f_flags & O_NONBLOCK) { ret = ctx->ops->send_mfc_command(ctx, &cmd); } else { diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index e164731..a973e79 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -143,7 +143,7 @@ static inline int spu_run_init(struct spu_context *ctx, u32 * npc) int ret; unsigned long runcntl = SPU_RUNCNTL_RUNNABLE; - ret = spu_acquire_runnable(ctx); + ret = spu_acquire_runnable(ctx, SPU_ACTIVATE_NOWAKE); if (ret) return ret; @@ -155,7 +155,7 @@ static inline int spu_run_init(struct spu_context *ctx, u32 * npc) spu_release(ctx); ret = spu_setup_isolated(ctx); if (!ret) - ret = spu_acquire_runnable(ctx); + ret = spu_acquire_runnable(ctx, SPU_ACTIVATE_NOWAKE); } /* if userspace has set the runcntrl register (eg, to issue an diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 6f8e225..07d0d09 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -247,8 +247,8 @@ static void spu_prio_wait(struct spu_context *ctx) { DEFINE_WAIT(wait); + set_bit(SPU_SCHED_WAKE, &ctx->sched_flags); prepare_to_wait_exclusive(&ctx->stop_wq, &wait, TASK_INTERRUPTIBLE); - if (!signal_pending(current)) { mutex_unlock(&ctx->state_mutex); schedule(); @@ -256,6 +256,7 @@ static void spu_prio_wait(struct spu_context *ctx) } __set_current_state(TASK_RUNNING); remove_wait_queue(&ctx->stop_wq, &wait); + clear_bit(SPU_SCHED_WAKE, &ctx->sched_flags); } /** @@ -275,7 +276,7 @@ static void spu_reschedule(struct spu *spu) best = sched_find_first_bit(spu_prio->bitmap); if (best < MAX_PRIO) { struct spu_context *ctx = spu_grab_context(best); - if (ctx) + if (ctx && test_bit(SPU_SCHED_WAKE, &ctx->sched_flags)) wake_up(&ctx->stop_wq); } spin_unlock(&spu_prio->runq_lock); @@ -315,7 +316,7 @@ static struct spu *spu_get_idle(struct spu_context *ctx) * add the context to the runqueue so it gets woken up once an spu * is available. */ -int spu_activate(struct spu_context *ctx, u64 flags) +int spu_activate(struct spu_context *ctx, unsigned long flags) { if (ctx->spu) @@ -331,7 +332,8 @@ int spu_activate(struct spu_context *ctx, u64 flags) } spu_add_to_rq(ctx); - spu_prio_wait(ctx); + if (!(flags & SPU_ACTIVATE_NOWAKE)) + spu_prio_wait(ctx); spu_del_from_rq(ctx); } while (!signal_pending(current)); diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 7f5a4fc..421f591 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -39,6 +39,11 @@ enum { struct spu_context_ops; struct spu_gang; +/* ctx->sched_flags */ +enum { + SPU_SCHED_WAKE = 0, +}; + struct spu_context { struct spu *spu; /* pointer to a physical SPU */ struct spu_state csa; /* SPU context save area. */ @@ -77,6 +82,7 @@ struct spu_context { /* scheduler fields */ struct list_head rq; + unsigned long sched_flags; int prio; }; @@ -179,10 +185,13 @@ int put_spu_context(struct spu_context *ctx); void spu_unmap_mappings(struct spu_context *ctx); void spu_forget(struct spu_context *ctx); -int spu_acquire_runnable(struct spu_context *ctx); +int spu_acquire_runnable(struct spu_context *ctx, unsigned long flags); void spu_acquire_saved(struct spu_context *ctx); int spu_acquire_exclusive(struct spu_context *ctx); -int spu_activate(struct spu_context *ctx, u64 flags); +enum { + SPU_ACTIVATE_NOWAKE = 1, +}; +int spu_activate(struct spu_context *ctx, unsigned long flags); void spu_deactivate(struct spu_context *ctx); void spu_yield(struct spu_context *ctx); int __init spu_sched_init(void); -- cgit v0.10.2 From 678b2ff1e65ecccdb15cbfe97081572fc35944b7 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:54:25 +0100 Subject: [POWERPC] spu sched: simplity spu_remove_from_active_list If we call spu_remove_from_active_list that spu is always guaranteed to be on the active list and in runnable state, so we can simply do a list_del to remove it and unconditionally take the was_active codepath. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 07d0d09..40202a7 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -83,27 +83,14 @@ static void spu_add_to_active_list(struct spu *spu) /** * spu_remove_from_active_list - remove spu from active list * @spu: spu to remove from the active list - * - * This function removes an spu from the active list. If the spu was - * found on the active list the function returns 1, else it doesn't do - * anything and returns 0. */ -static int spu_remove_from_active_list(struct spu *spu) +static void spu_remove_from_active_list(struct spu *spu) { int node = spu->node; - struct spu *tmp; - int rc = 0; mutex_lock(&spu_prio->active_mutex[node]); - list_for_each_entry(tmp, &spu_prio->active_list[node], list) { - if (tmp == spu) { - list_del_init(&spu->list); - rc = 1; - break; - } - } + list_del_init(&spu->list); mutex_unlock(&spu_prio->active_mutex[node]); - return rc; } static inline void mm_needs_global_tlbie(struct mm_struct *mm) @@ -167,16 +154,13 @@ static void spu_bind_context(struct spu *spu, struct spu_context *ctx) * spu_unbind_context - unbind spu context from physical spu * @spu: physical spu to unbind from * @ctx: context to unbind - * - * If the spu was on the active list the function returns 1, else 0. */ -static int spu_unbind_context(struct spu *spu, struct spu_context *ctx) +static void spu_unbind_context(struct spu *spu, struct spu_context *ctx) { - int was_active = spu_remove_from_active_list(spu); - pr_debug("%s: unbind pid=%d SPU=%d NODE=%d\n", __FUNCTION__, spu->pid, spu->number, spu->node); + spu_remove_from_active_list(spu); spu_switch_notify(spu, NULL); spu_unmap_mappings(ctx); spu_save(&ctx->csa, spu); @@ -193,8 +177,6 @@ static int spu_unbind_context(struct spu *spu, struct spu_context *ctx) ctx->spu = NULL; spu->flags = 0; spu->ctx = NULL; - - return was_active; } /** @@ -340,17 +322,21 @@ int spu_activate(struct spu_context *ctx, unsigned long flags) return -ERESTARTSYS; } +/** + * spu_deactivate - unbind a context from it's physical spu + * @ctx: spu context to unbind + * + * Unbind @ctx from the physical spu it is running on and schedule + * the highest priority context to run on the freed physical spu. + */ void spu_deactivate(struct spu_context *ctx) { - struct spu *spu; - int was_active; + struct spu *spu = ctx->spu; - spu = ctx->spu; - if (!spu) - return; - was_active = spu_unbind_context(spu, ctx); - if (was_active) + if (spu) { + spu_unbind_context(spu, ctx); spu_reschedule(spu); + } } void spu_yield(struct spu_context *ctx) -- cgit v0.10.2 From ae7b4c5284d11d49ed9432c16505fcbeb8d3b8cf Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:54:26 +0100 Subject: [POWERPC] spu sched: update some comments Give spu_yield a kerneldoc comment and remove the old comment documenting spu_activate, spu_deactive and spu_yield as all of them now have descriptive kerneldoc comments of their own. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 40202a7..eb06a03 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -281,14 +281,6 @@ static struct spu *spu_get_idle(struct spu_context *ctx) return spu; } -/* The three externally callable interfaces - * for the scheduler begin here. - * - * spu_activate - bind a context to SPU, waiting as needed. - * spu_deactivate - unbind a context from its SPU. - * spu_yield - yield an SPU if others are waiting. - */ - /** * spu_activate - find a free spu for a context and execute it * @ctx: spu context to schedule @@ -339,6 +331,14 @@ void spu_deactivate(struct spu_context *ctx) } } +/** + * spu_yield - yield a physical spu if others are waiting + * @ctx: spu context to yield + * + * Check if there is a higher priority context waiting and if yes + * unbind @ctx from the physical spu and schedule the highest + * priority context to run on the freed physical spu instead. + */ void spu_yield(struct spu_context *ctx) { struct spu *spu; -- cgit v0.10.2 From 52f04fcf66a5d5d90790d6cfde52e391ecf2b882 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:54:27 +0100 Subject: [POWERPC] spu sched: forced preemption at execution If we start a spu context with realtime priority we want it to run immediately and not wait until some other lower priority thread has finished. Try to find a suitable victim and use it's spu in this case. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index 056a8ad..d581f4e 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -53,6 +53,7 @@ struct spu_context *alloc_spu_context(struct spu_gang *gang) ctx->owner = get_task_mm(current); if (gang) spu_gang_add_ctx(gang, ctx); + ctx->rt_priority = current->rt_priority; ctx->prio = current->prio; goto out; out_free: diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index eb06a03..814f65e 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -282,6 +282,74 @@ static struct spu *spu_get_idle(struct spu_context *ctx) } /** + * find_victim - find a lower priority context to preempt + * @ctx: canidate context for running + * + * Returns the freed physical spu to run the new context on. + */ +static struct spu *find_victim(struct spu_context *ctx) +{ + struct spu_context *victim = NULL; + struct spu *spu; + int node, n; + + /* + * Look for a possible preemption candidate on the local node first. + * If there is no candidate look at the other nodes. This isn't + * exactly fair, but so far the whole spu schedule tries to keep + * a strong node affinity. We might want to fine-tune this in + * the future. + */ + restart: + node = cpu_to_node(raw_smp_processor_id()); + for (n = 0; n < MAX_NUMNODES; n++, node++) { + node = (node < MAX_NUMNODES) ? node : 0; + if (!node_allowed(node)) + continue; + + mutex_lock(&spu_prio->active_mutex[node]); + list_for_each_entry(spu, &spu_prio->active_list[node], list) { + struct spu_context *tmp = spu->ctx; + + if (tmp->rt_priority < ctx->rt_priority && + (!victim || tmp->rt_priority < victim->rt_priority)) + victim = spu->ctx; + } + mutex_unlock(&spu_prio->active_mutex[node]); + + if (victim) { + /* + * This nests ctx->state_mutex, but we always lock + * higher priority contexts before lower priority + * ones, so this is safe until we introduce + * priority inheritance schemes. + */ + if (!mutex_trylock(&victim->state_mutex)) { + victim = NULL; + goto restart; + } + + spu = victim->spu; + if (!spu) { + /* + * This race can happen because we've dropped + * the active list mutex. No a problem, just + * restart the search. + */ + mutex_unlock(&victim->state_mutex); + victim = NULL; + goto restart; + } + spu_unbind_context(spu, victim); + mutex_unlock(&victim->state_mutex); + return spu; + } + } + + return NULL; +} + +/** * spu_activate - find a free spu for a context and execute it * @ctx: spu context to schedule * @flags: flags (currently ignored) @@ -300,6 +368,12 @@ int spu_activate(struct spu_context *ctx, unsigned long flags) struct spu *spu; spu = spu_get_idle(ctx); + /* + * If this is a realtime thread we try to get it running by + * preempting a lower priority thread. + */ + if (!spu && ctx->rt_priority) + spu = find_victim(ctx); if (spu) { spu_bind_context(spu, ctx); return 0; diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 421f591..85b182d 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -83,6 +83,7 @@ struct spu_context { /* scheduler fields */ struct list_head rq; unsigned long sched_flags; + unsigned long rt_priority; int prio; }; -- cgit v0.10.2 From 72cb360839f88c02ccf38f1df214316e05886ff3 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:54:28 +0100 Subject: [POWERPC] spu sched: use DECLARE_BITMAP use DECLARE_BITMAP in the spu scheduler instead of reimplementing it. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 814f65e..ba4b01e 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -46,9 +46,8 @@ #define SPU_MIN_TIMESLICE (100 * HZ / 1000) -#define SPU_BITMAP_SIZE (((MAX_PRIO+BITS_PER_LONG)/BITS_PER_LONG)+1) struct spu_prio_array { - unsigned long bitmap[SPU_BITMAP_SIZE]; + DECLARE_BITMAP(bitmap, MAX_PRIO); struct list_head runq[MAX_PRIO]; spinlock_t runq_lock; struct list_head active_list[MAX_NUMNODES]; -- cgit v0.10.2 From 2eb1b12049844a8ebc670e0e4fc908bc3f8933d3 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:54:29 +0100 Subject: [POWERPC] spu sched: static timeslicing for SCHED_RR contexts For SCHED_RR tasks we can do some really trivial timeslicing. Basically we fire up a time for every scheduler tick that searches for a higher or same priority thread that is on the runqueue and if there is one context switches to it. Because we can't lock spus from timer context we actually run this from a delayed runqueue instead of a timer. A nice optimization would be to skip the actual priority bitmap search when there are less contexts than physical spus available. To implement this I need a so far unpublished patch from Andre, and it will be added after we have that patch in. Note that right now we only do the time slicing for SCHED_RR tasks. The code would work for SCHED_OTHER tasks aswell, but their prio value is defered from the one the PPU thread has at time of spu_run, and using this for spu scheduling decisions would make the code very unfair. SCHED_OTHER support will be enabled once we the spu scheduler knows how to calculcate cpu_context.prio (very soon) Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index d581f4e..04ad2e3 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -54,7 +54,9 @@ struct spu_context *alloc_spu_context(struct spu_gang *gang) if (gang) spu_gang_add_ctx(gang, ctx); ctx->rt_priority = current->rt_priority; + ctx->policy = current->policy; ctx->prio = current->prio; + INIT_DELAYED_WORK(&ctx->sched_work, spu_sched_tick); goto out; out_free: kfree(ctx); diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index a973e79..353a8fa 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -164,8 +164,10 @@ static inline int spu_run_init(struct spu_context *ctx, u32 * npc) (SPU_RUNCNTL_RUNNABLE | SPU_RUNCNTL_ISOLATE); if (runcntl == 0) runcntl = SPU_RUNCNTL_RUNNABLE; - } else + } else { + spu_start_tick(ctx); ctx->ops->npc_write(ctx, *npc); + } ctx->ops->runcntl_write(ctx, runcntl); return ret; @@ -176,6 +178,7 @@ static inline int spu_run_fini(struct spu_context *ctx, u32 * npc, { int ret = 0; + spu_stop_tick(ctx); *status = ctx->ops->status_read(ctx); *npc = ctx->ops->npc_read(ctx); spu_release(ctx); @@ -329,8 +332,10 @@ long spufs_run_spu(struct file *file, struct spu_context *ctx, } if (unlikely(ctx->state != SPU_STATE_RUNNABLE)) { ret = spu_reacquire_runnable(ctx, npc, &status); - if (ret) + if (ret) { + spu_stop_tick(ctx); goto out2; + } continue; } ret = spu_process_events(ctx); diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index ba4b01e..2f25e68 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -44,7 +44,7 @@ #include #include "spufs.h" -#define SPU_MIN_TIMESLICE (100 * HZ / 1000) +#define SPU_TIMESLICE (HZ) struct spu_prio_array { DECLARE_BITMAP(bitmap, MAX_PRIO); @@ -55,6 +55,7 @@ struct spu_prio_array { }; static struct spu_prio_array *spu_prio; +static struct workqueue_struct *spu_sched_wq; static inline int node_allowed(int node) { @@ -68,6 +69,40 @@ static inline int node_allowed(int node) return 1; } +void spu_start_tick(struct spu_context *ctx) +{ + if (ctx->policy == SCHED_RR) + queue_delayed_work(spu_sched_wq, &ctx->sched_work, SPU_TIMESLICE); +} + +void spu_stop_tick(struct spu_context *ctx) +{ + if (ctx->policy == SCHED_RR) + cancel_delayed_work(&ctx->sched_work); +} + +void spu_sched_tick(struct work_struct *work) +{ + struct spu_context *ctx = + container_of(work, struct spu_context, sched_work.work); + struct spu *spu; + int rearm = 1; + + mutex_lock(&ctx->state_mutex); + spu = ctx->spu; + if (spu) { + int best = sched_find_first_bit(spu_prio->bitmap); + if (best <= ctx->prio) { + spu_deactivate(ctx); + rearm = 0; + } + } + mutex_unlock(&ctx->state_mutex); + + if (rearm) + spu_start_tick(ctx); +} + /** * spu_add_to_active_list - add spu to active list * @spu: spu to add to the active list @@ -437,10 +472,15 @@ int __init spu_sched_init(void) { int i; + spu_sched_wq = create_singlethread_workqueue("spusched"); + if (!spu_sched_wq) + return 1; + spu_prio = kzalloc(sizeof(struct spu_prio_array), GFP_KERNEL); if (!spu_prio) { printk(KERN_WARNING "%s: Unable to allocate priority queue.\n", __FUNCTION__); + destroy_workqueue(spu_sched_wq); return 1; } for (i = 0; i < MAX_PRIO; i++) { @@ -471,4 +511,5 @@ void __exit spu_sched_exit(void) mutex_unlock(&spu_prio->active_mutex[node]); } kfree(spu_prio); + destroy_workqueue(spu_sched_wq); } diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 85b182d..0c43789 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -82,8 +82,10 @@ struct spu_context { /* scheduler fields */ struct list_head rq; + struct delayed_work sched_work; unsigned long sched_flags; unsigned long rt_priority; + int policy; int prio; }; @@ -195,6 +197,9 @@ enum { int spu_activate(struct spu_context *ctx, unsigned long flags); void spu_deactivate(struct spu_context *ctx); void spu_yield(struct spu_context *ctx); +void spu_start_tick(struct spu_context *ctx); +void spu_stop_tick(struct spu_context *ctx); +void spu_sched_tick(struct work_struct *work); int __init spu_sched_init(void); void __exit spu_sched_exit(void); -- cgit v0.10.2 From 128b8546a83a9e37448bc126e1045dc1db291165 Mon Sep 17 00:00:00 2001 From: Masato Noguchi Date: Tue, 13 Feb 2007 21:54:30 +0100 Subject: [POWERPC] spufs: avoid accessing kernel memory through mmapped /mem node I found an exploit in current kernel. Currently, there is no range check about mmapping "/mem" node in spufs. Thus, an application can access privilege memory region. In case this kernel already worked on a public server, I send this information only here. If there are such servers in somewhere, please replace it, ASAP. Signed-off-by: Masato Noguchi Signed-off-by: Arnd Bergmann diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index c729813..b00653d 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -103,6 +103,9 @@ static unsigned long spufs_mem_mmap_nopfn(struct vm_area_struct *vma, offset += vma->vm_pgoff << PAGE_SHIFT; + if (offset >= LS_SIZE) + return NOPFN_SIGBUS; + spu_acquire(ctx); if (ctx->state == SPU_STATE_SAVED) { -- cgit v0.10.2 From 73d605d1abbd70ef67b7660cf2ff177259960756 Mon Sep 17 00:00:00 2001 From: Kazunori MIYAZAWA Date: Tue, 13 Feb 2007 12:55:55 -0800 Subject: [IPSEC]: changing API of xfrm6_tunnel_register This patch changes xfrm6_tunnel register and deregister interface to prepare for solving the conflict of device tunnels with inter address family IPsec tunnel. There is no device which conflicts with IPv4 over IPv6 IPsec tunnel. Signed-off-by: Kazunori MIYAZAWA Signed-off-by: David S. Miller diff --git a/include/net/xfrm.h b/include/net/xfrm.h index 20be8be..92a1fc4 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -952,8 +952,8 @@ extern int xfrm6_rcv_spi(struct sk_buff *skb, __be32 spi); extern int xfrm6_rcv(struct sk_buff **pskb); extern int xfrm6_input_addr(struct sk_buff *skb, xfrm_address_t *daddr, xfrm_address_t *saddr, u8 proto); -extern int xfrm6_tunnel_register(struct xfrm6_tunnel *handler); -extern int xfrm6_tunnel_deregister(struct xfrm6_tunnel *handler); +extern int xfrm6_tunnel_register(struct xfrm6_tunnel *handler, unsigned short family); +extern int xfrm6_tunnel_deregister(struct xfrm6_tunnel *handler, unsigned short family); extern __be32 xfrm6_tunnel_alloc_spi(xfrm_address_t *saddr); extern void xfrm6_tunnel_free_spi(xfrm_address_t *saddr); extern __be32 xfrm6_tunnel_spi_lookup(xfrm_address_t *saddr); diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c index 367b748..662edb8 100644 --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -1128,7 +1128,7 @@ static int __init ip6_tunnel_init(void) { int err; - if (xfrm6_tunnel_register(&ip6ip6_handler)) { + if (xfrm6_tunnel_register(&ip6ip6_handler, AF_INET6)) { printk(KERN_ERR "ip6ip6 init: can't register tunnel\n"); return -EAGAIN; } @@ -1147,7 +1147,7 @@ static int __init ip6_tunnel_init(void) } return 0; fail: - xfrm6_tunnel_deregister(&ip6ip6_handler); + xfrm6_tunnel_deregister(&ip6ip6_handler, AF_INET6); return err; } @@ -1171,7 +1171,7 @@ static void __exit ip6ip6_destroy_tunnels(void) static void __exit ip6_tunnel_cleanup(void) { - if (xfrm6_tunnel_deregister(&ip6ip6_handler)) + if (xfrm6_tunnel_deregister(&ip6ip6_handler, AF_INET6)) printk(KERN_INFO "ip6ip6 close: can't deregister tunnel\n"); rtnl_lock(); diff --git a/net/ipv6/tunnel6.c b/net/ipv6/tunnel6.c index 918d07d..23e2809 100644 --- a/net/ipv6/tunnel6.c +++ b/net/ipv6/tunnel6.c @@ -30,9 +30,10 @@ #include static struct xfrm6_tunnel *tunnel6_handlers; +static struct xfrm6_tunnel *tunnel46_handlers; static DEFINE_MUTEX(tunnel6_mutex); -int xfrm6_tunnel_register(struct xfrm6_tunnel *handler) +int xfrm6_tunnel_register(struct xfrm6_tunnel *handler, unsigned short family) { struct xfrm6_tunnel **pprev; int ret = -EEXIST; @@ -40,7 +41,8 @@ int xfrm6_tunnel_register(struct xfrm6_tunnel *handler) mutex_lock(&tunnel6_mutex); - for (pprev = &tunnel6_handlers; *pprev; pprev = &(*pprev)->next) { + for (pprev = (family == AF_INET6) ? &tunnel6_handlers : &tunnel46_handlers; + *pprev; pprev = &(*pprev)->next) { if ((*pprev)->priority > priority) break; if ((*pprev)->priority == priority) @@ -60,14 +62,15 @@ err: EXPORT_SYMBOL(xfrm6_tunnel_register); -int xfrm6_tunnel_deregister(struct xfrm6_tunnel *handler) +int xfrm6_tunnel_deregister(struct xfrm6_tunnel *handler, unsigned short family) { struct xfrm6_tunnel **pprev; int ret = -ENOENT; mutex_lock(&tunnel6_mutex); - for (pprev = &tunnel6_handlers; *pprev; pprev = &(*pprev)->next) { + for (pprev = (family == AF_INET6) ? &tunnel6_handlers : &tunnel46_handlers; + *pprev; pprev = &(*pprev)->next) { if (*pprev == handler) { *pprev = handler->next; ret = 0; @@ -103,6 +106,25 @@ drop: return 0; } +static int tunnel46_rcv(struct sk_buff **pskb) +{ + struct sk_buff *skb = *pskb; + struct xfrm6_tunnel *handler; + + if (!pskb_may_pull(skb, sizeof(struct ipv6hdr))) + goto drop; + + for (handler = tunnel46_handlers; handler; handler = handler->next) + if (!handler->handler(skb)) + return 0; + + icmpv6_send(skb, ICMPV6_DEST_UNREACH, ICMPV6_PORT_UNREACH, 0, skb->dev); + +drop: + kfree_skb(skb); + return 0; +} + static void tunnel6_err(struct sk_buff *skb, struct inet6_skb_parm *opt, int type, int code, int offset, __be32 info) { @@ -119,17 +141,30 @@ static struct inet6_protocol tunnel6_protocol = { .flags = INET6_PROTO_NOPOLICY|INET6_PROTO_FINAL, }; +static struct inet6_protocol tunnel46_protocol = { + .handler = tunnel46_rcv, + .err_handler = tunnel6_err, + .flags = INET6_PROTO_NOPOLICY|INET6_PROTO_FINAL, +}; + static int __init tunnel6_init(void) { if (inet6_add_protocol(&tunnel6_protocol, IPPROTO_IPV6)) { printk(KERN_ERR "tunnel6 init(): can't add protocol\n"); return -EAGAIN; } + if (inet6_add_protocol(&tunnel46_protocol, IPPROTO_IPIP)) { + printk(KERN_ERR "tunnel6 init(): can't add protocol\n"); + inet6_del_protocol(&tunnel6_protocol, IPPROTO_IPV6); + return -EAGAIN; + } return 0; } static void __exit tunnel6_fini(void) { + if (inet6_del_protocol(&tunnel46_protocol, IPPROTO_IPIP)) + printk(KERN_ERR "tunnel6 close: can't remove protocol\n"); if (inet6_del_protocol(&tunnel6_protocol, IPPROTO_IPV6)) printk(KERN_ERR "tunnel6 close: can't remove protocol\n"); } diff --git a/net/ipv6/xfrm6_input.c b/net/ipv6/xfrm6_input.c index 2525014..31f651f 100644 --- a/net/ipv6/xfrm6_input.c +++ b/net/ipv6/xfrm6_input.c @@ -40,7 +40,8 @@ int xfrm6_rcv_spi(struct sk_buff *skb, __be32 spi) if (xfrm_nr == XFRM_MAX_DEPTH) goto drop; - x = xfrm_state_lookup((xfrm_address_t *)&iph->daddr, spi, nexthdr, AF_INET6); + x = xfrm_state_lookup((xfrm_address_t *)&iph->daddr, spi, + nexthdr != IPPROTO_IPIP ? nexthdr : IPPROTO_IPV6, AF_INET6); if (x == NULL) goto drop; spin_lock(&x->lock); diff --git a/net/ipv6/xfrm6_tunnel.c b/net/ipv6/xfrm6_tunnel.c index fb02287..ee4b84a 100644 --- a/net/ipv6/xfrm6_tunnel.c +++ b/net/ipv6/xfrm6_tunnel.c @@ -339,17 +339,29 @@ static struct xfrm6_tunnel xfrm6_tunnel_handler = { .priority = 2, }; +static struct xfrm6_tunnel xfrm46_tunnel_handler = { + .handler = xfrm6_tunnel_rcv, + .err_handler = xfrm6_tunnel_err, + .priority = 2, +}; + static int __init xfrm6_tunnel_init(void) { if (xfrm_register_type(&xfrm6_tunnel_type, AF_INET6) < 0) return -EAGAIN; - if (xfrm6_tunnel_register(&xfrm6_tunnel_handler)) { + if (xfrm6_tunnel_register(&xfrm6_tunnel_handler, AF_INET6)) { + xfrm_unregister_type(&xfrm6_tunnel_type, AF_INET6); + return -EAGAIN; + } + if (xfrm6_tunnel_register(&xfrm46_tunnel_handler, AF_INET)) { + xfrm6_tunnel_deregister(&xfrm6_tunnel_handler, AF_INET6); xfrm_unregister_type(&xfrm6_tunnel_type, AF_INET6); return -EAGAIN; } if (xfrm6_tunnel_spi_init() < 0) { - xfrm6_tunnel_deregister(&xfrm6_tunnel_handler); + xfrm6_tunnel_deregister(&xfrm46_tunnel_handler, AF_INET); + xfrm6_tunnel_deregister(&xfrm6_tunnel_handler, AF_INET6); xfrm_unregister_type(&xfrm6_tunnel_type, AF_INET6); return -EAGAIN; } @@ -359,7 +371,8 @@ static int __init xfrm6_tunnel_init(void) static void __exit xfrm6_tunnel_fini(void) { xfrm6_tunnel_spi_fini(); - xfrm6_tunnel_deregister(&xfrm6_tunnel_handler); + xfrm6_tunnel_deregister(&xfrm46_tunnel_handler, AF_INET); + xfrm6_tunnel_deregister(&xfrm6_tunnel_handler, AF_INET6); xfrm_unregister_type(&xfrm6_tunnel_type, AF_INET6); } -- cgit v0.10.2 From 928ba4169dc1d82c83105831f5ddb5472379b440 Mon Sep 17 00:00:00 2001 From: Kazunori MIYAZAWA Date: Tue, 13 Feb 2007 12:57:16 -0800 Subject: [IPSEC]: Fix the address family to refer encap_family Fix the address family to refer encap_family when comparing with a kernel generated xfrm_state Signed-off-by: Kazunori MIYAZAWA Signed-off-by: David S. Miller diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index c394b41..946b715 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -1550,7 +1550,7 @@ xfrm_state_ok(struct xfrm_tmpl *tmpl, struct xfrm_state *x, unsigned short family) { if (xfrm_state_kern(x)) - return tmpl->optional && !xfrm_state_addr_cmp(tmpl, x, family); + return tmpl->optional && !xfrm_state_addr_cmp(tmpl, x, tmpl->encap_family); return x->id.proto == tmpl->id.proto && (x->id.spi == tmpl->id.spi || !tmpl->id.spi) && (x->props.reqid == tmpl->reqid || !tmpl->reqid) && -- cgit v0.10.2 From bcb63e25ed3c56ee40cca4d18fbaac1d2a40c1d6 Mon Sep 17 00:00:00 2001 From: Carl Love Date: Tue, 13 Feb 2007 22:02:02 +0100 Subject: [POWERPC] cell: PPU Oprofile cleanup patch This is a clean up patch that includes the following changes: -Some comments were added to clarify the code based on feedback from the community. -The write_pm_cntrl() and set_count_mode() were passed a structure element from a global variable. The argument was removed so the functions now just operate on the global directly. -The set_pm_event() function call in the cell_virtual_cntr() routine was moved to a for-loop before the for_each_cpu loop Signed-off-by: Carl Love Signed-off-by: Maynard Johnson Signed-off-by: Arnd Bergmann diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index 2eb15f3..8d4a958 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -41,8 +41,12 @@ #define PPU_CYCLES_EVENT_NUM 1 /* event number for CYCLES */ #define CBE_COUNT_ALL_CYCLES 0x42800000 /* PPU cycle event specifier */ -#define NUM_THREADS 2 -#define VIRT_CNTR_SW_TIME_NS 100000000 // 0.5 seconds +#define NUM_THREADS 2 /* number of physical threads in + * physical processor + */ +#define NUM_TRACE_BUS_WORDS 4 +#define NUM_INPUT_BUS_WORDS 2 + struct pmc_cntrl_data { unsigned long vcntr; @@ -93,7 +97,6 @@ static struct { u32 pm07_cntrl[NR_PHYS_CTRS]; } pm_regs; - #define GET_SUB_UNIT(x) ((x & 0x0000f000) >> 12) #define GET_BUS_WORD(x) ((x & 0x000000f0) >> 4) #define GET_BUS_TYPE(x) ((x & 0x00000300) >> 8) @@ -101,7 +104,6 @@ static struct { #define GET_COUNT_CYCLES(x) (x & 0x00000001) #define GET_INPUT_CONTROL(x) ((x & 0x00000004) >> 2) - static DEFINE_PER_CPU(unsigned long[NR_PHYS_CTRS], pmc_values); static struct pmc_cntrl_data pmc_cntrl[NUM_THREADS][NR_PHYS_CTRS]; @@ -129,8 +131,8 @@ static spinlock_t virt_cntr_lock = SPIN_LOCK_UNLOCKED; static u32 ctr_enabled; -static unsigned char trace_bus[4]; -static unsigned char input_bus[2]; +static unsigned char trace_bus[NUM_TRACE_BUS_WORDS]; +static unsigned char input_bus[NUM_INPUT_BUS_WORDS]; /* * Firmware interface functions @@ -183,7 +185,8 @@ static void pm_rtas_activate_signals(u32 node, u32 count) for (j = 0; j < count; j++) { /* fw expects physical cpu # */ pm_signal_local[j].cpu = node; - pm_signal_local[j].signal_group = pm_signal[j].signal_group; + pm_signal_local[j].signal_group + = pm_signal[j].signal_group; pm_signal_local[j].bus_word = pm_signal[j].bus_word; pm_signal_local[j].sub_unit = pm_signal[j].sub_unit; pm_signal_local[j].bit = pm_signal[j].bit; @@ -232,13 +235,21 @@ static void set_pm_event(u32 ctr, int event, u32 unit_mask) p->signal_group = event / 100; p->bus_word = bus_word; - p->sub_unit = unit_mask & 0x0000f000; + p->sub_unit = (unit_mask & 0x0000f000) >> 12; pm_regs.pm07_cntrl[ctr] = 0; pm_regs.pm07_cntrl[ctr] |= PM07_CTR_COUNT_CYCLES(count_cycles); pm_regs.pm07_cntrl[ctr] |= PM07_CTR_POLARITY(polarity); pm_regs.pm07_cntrl[ctr] |= PM07_CTR_INPUT_CONTROL(input_control); + /* Some of the islands signal selection is based on 64 bit words. + * The debug bus words are 32 bits, the input words to the performance + * counters are defined as 32 bits. Need to convert the 64 bit island + * specification to the appropriate 32 input bit and bus word for the + * performance counter event selection. See the CELL Performance + * monitoring signals manual and the Perf cntr hardware descriptions + * for the details. + */ if (input_control == 0) { if (signal_bit > 31) { signal_bit -= 32; @@ -259,12 +270,12 @@ static void set_pm_event(u32 ctr, int event, u32 unit_mask) p->bit = signal_bit; } - for (i = 0; i < 4; i++) { + for (i = 0; i < NUM_TRACE_BUS_WORDS; i++) { if (bus_word & (1 << i)) { pm_regs.debug_bus_control |= (bus_type << (31 - (2 * i) + 1)); - for (j = 0; j < 2; j++) { + for (j = 0; j < NUM_INPUT_BUS_WORDS; j++) { if (input_bus[j] == 0xff) { input_bus[j] = i; pm_regs.group_control |= @@ -278,52 +289,58 @@ out: ; } -static void write_pm_cntrl(int cpu, struct pm_cntrl *pm_cntrl) +static void write_pm_cntrl(int cpu) { - /* Oprofile will use 32 bit counters, set bits 7:10 to 0 */ + /* Oprofile will use 32 bit counters, set bits 7:10 to 0 + * pmregs.pm_cntrl is a global + */ + u32 val = 0; - if (pm_cntrl->enable == 1) + if (pm_regs.pm_cntrl.enable == 1) val |= CBE_PM_ENABLE_PERF_MON; - if (pm_cntrl->stop_at_max == 1) + if (pm_regs.pm_cntrl.stop_at_max == 1) val |= CBE_PM_STOP_AT_MAX; - if (pm_cntrl->trace_mode == 1) - val |= CBE_PM_TRACE_MODE_SET(pm_cntrl->trace_mode); + if (pm_regs.pm_cntrl.trace_mode == 1) + val |= CBE_PM_TRACE_MODE_SET(pm_regs.pm_cntrl.trace_mode); - if (pm_cntrl->freeze == 1) + if (pm_regs.pm_cntrl.freeze == 1) val |= CBE_PM_FREEZE_ALL_CTRS; /* Routine set_count_mode must be called previously to set * the count mode based on the user selection of user and kernel. */ - val |= CBE_PM_COUNT_MODE_SET(pm_cntrl->count_mode); + val |= CBE_PM_COUNT_MODE_SET(pm_regs.pm_cntrl.count_mode); cbe_write_pm(cpu, pm_control, val); } static inline void -set_count_mode(u32 kernel, u32 user, struct pm_cntrl *pm_cntrl) +set_count_mode(u32 kernel, u32 user) { /* The user must specify user and kernel if they want them. If - * neither is specified, OProfile will count in hypervisor mode + * neither is specified, OProfile will count in hypervisor mode. + * pm_regs.pm_cntrl is a global */ if (kernel) { if (user) - pm_cntrl->count_mode = CBE_COUNT_ALL_MODES; + pm_regs.pm_cntrl.count_mode = CBE_COUNT_ALL_MODES; else - pm_cntrl->count_mode = CBE_COUNT_SUPERVISOR_MODE; + pm_regs.pm_cntrl.count_mode = + CBE_COUNT_SUPERVISOR_MODE; } else { if (user) - pm_cntrl->count_mode = CBE_COUNT_PROBLEM_MODE; + pm_regs.pm_cntrl.count_mode = CBE_COUNT_PROBLEM_MODE; else - pm_cntrl->count_mode = CBE_COUNT_HYPERVISOR_MODE; + pm_regs.pm_cntrl.count_mode = + CBE_COUNT_HYPERVISOR_MODE; } } static inline void enable_ctr(u32 cpu, u32 ctr, u32 * pm07_cntrl) { - pm07_cntrl[ctr] |= PM07_CTR_ENABLE(1); + pm07_cntrl[ctr] |= CBE_PM_CTR_ENABLE; cbe_write_pm07_control(cpu, ctr, pm07_cntrl[ctr]); } @@ -365,6 +382,14 @@ static void cell_virtual_cntr(unsigned long data) hdw_thread = 1 ^ hdw_thread; next_hdw_thread = hdw_thread; + for (i = 0; i < num_counters; i++) + /* There are some per thread events. Must do the + * set event, for the thread that is being started + */ + set_pm_event(i, + pmc_cntrl[next_hdw_thread][i].evnts, + pmc_cntrl[next_hdw_thread][i].masks); + /* The following is done only once per each node, but * we need cpu #, not node #, to pass to the cbe_xxx functions. */ @@ -385,12 +410,13 @@ static void cell_virtual_cntr(unsigned long data) == 0xFFFFFFFF) /* If the cntr value is 0xffffffff, we must * reset that to 0xfffffff0 when the current - * thread is restarted. This will generate a new - * interrupt and make sure that we never restore - * the counters to the max value. If the counters - * were restored to the max value, they do not - * increment and no interrupts are generated. Hence - * no more samples will be collected on that cpu. + * thread is restarted. This will generate a + * new interrupt and make sure that we never + * restore the counters to the max value. If + * the counters were restored to the max value, + * they do not increment and no interrupts are + * generated. Hence no more samples will be + * collected on that cpu. */ cbe_write_ctr(cpu, i, 0xFFFFFFF0); else @@ -410,9 +436,6 @@ static void cell_virtual_cntr(unsigned long data) * Must do the set event, enable_cntr * for each cpu. */ - set_pm_event(i, - pmc_cntrl[next_hdw_thread][i].evnts, - pmc_cntrl[next_hdw_thread][i].masks); enable_ctr(cpu, i, pm_regs.pm07_cntrl); } else { @@ -465,8 +488,7 @@ cell_reg_setup(struct op_counter_config *ctr, pm_regs.pm_cntrl.trace_mode = 0; pm_regs.pm_cntrl.freeze = 1; - set_count_mode(sys->enable_kernel, sys->enable_user, - &pm_regs.pm_cntrl); + set_count_mode(sys->enable_kernel, sys->enable_user); /* Setup the thread 0 events */ for (i = 0; i < num_ctrs; ++i) { @@ -498,10 +520,10 @@ cell_reg_setup(struct op_counter_config *ctr, pmc_cntrl[1][i].vcntr = i; } - for (i = 0; i < 4; i++) + for (i = 0; i < NUM_TRACE_BUS_WORDS; i++) trace_bus[i] = 0xff; - for (i = 0; i < 2; i++) + for (i = 0; i < NUM_INPUT_BUS_WORDS; i++) input_bus[i] = 0xff; /* Our counters count up, and "count" refers to @@ -560,7 +582,7 @@ static void cell_cpu_setup(struct op_counter_config *cntr) cbe_write_pm(cpu, pm_start_stop, 0); cbe_write_pm(cpu, group_control, pm_regs.group_control); cbe_write_pm(cpu, debug_bus_control, pm_regs.debug_bus_control); - write_pm_cntrl(cpu, &pm_regs.pm_cntrl); + write_pm_cntrl(cpu); for (i = 0; i < num_counters; ++i) { if (ctr_enabled & (1 << i)) { @@ -602,7 +624,7 @@ static void cell_global_start(struct op_counter_config *ctr) } } - cbe_clear_pm_interrupts(cpu); + cbe_get_and_clear_pm_interrupts(cpu); cbe_enable_pm_interrupts(cpu, hdw_thread, interrupt_mask); cbe_enable_pm(cpu); } @@ -672,7 +694,7 @@ cell_handle_interrupt(struct pt_regs *regs, struct op_counter_config *ctr) cbe_disable_pm(cpu); - interrupt_mask = cbe_clear_pm_interrupts(cpu); + interrupt_mask = cbe_get_and_clear_pm_interrupts(cpu); /* If the interrupt mask has been cleared, then the virt cntr * has cleared the interrupt. When the thread that generated diff --git a/arch/powerpc/platforms/cell/pmu.c b/arch/powerpc/platforms/cell/pmu.c index d04ae16..66ca4b5 100644 --- a/arch/powerpc/platforms/cell/pmu.c +++ b/arch/powerpc/platforms/cell/pmu.c @@ -345,18 +345,12 @@ EXPORT_SYMBOL_GPL(cbe_read_trace_buffer); * Enabling/disabling interrupts for the entire performance monitoring unit. */ -u32 cbe_query_pm_interrupts(u32 cpu) -{ - return cbe_read_pm(cpu, pm_status); -} -EXPORT_SYMBOL_GPL(cbe_query_pm_interrupts); - -u32 cbe_clear_pm_interrupts(u32 cpu) +u32 cbe_get_and_clear_pm_interrupts(u32 cpu) { /* Reading pm_status clears the interrupt bits. */ - return cbe_query_pm_interrupts(cpu); + return cbe_read_pm(cpu, pm_status); } -EXPORT_SYMBOL_GPL(cbe_clear_pm_interrupts); +EXPORT_SYMBOL_GPL(cbe_get_and_clear_pm_interrupts); void cbe_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask) { @@ -371,7 +365,7 @@ EXPORT_SYMBOL_GPL(cbe_enable_pm_interrupts); void cbe_disable_pm_interrupts(u32 cpu) { - cbe_clear_pm_interrupts(cpu); + cbe_get_and_clear_pm_interrupts(cpu); cbe_write_pm(cpu, pm_status, 0); } EXPORT_SYMBOL_GPL(cbe_disable_pm_interrupts); diff --git a/include/asm-powerpc/cell-pmu.h b/include/asm-powerpc/cell-pmu.h index e8c2ebd..35b9577 100644 --- a/include/asm-powerpc/cell-pmu.h +++ b/include/asm-powerpc/cell-pmu.h @@ -53,6 +53,11 @@ #define CBE_PM_CTR_POLARITY 0x01000000 #define CBE_PM_CTR_COUNT_CYCLES 0x00800000 #define CBE_PM_CTR_ENABLE 0x00400000 +#define PM07_CTR_INPUT_MUX(x) (((x) & 0x3F) << 26) +#define PM07_CTR_INPUT_CONTROL(x) (((x) & 1) << 25) +#define PM07_CTR_POLARITY(x) (((x) & 1) << 24) +#define PM07_CTR_COUNT_CYCLES(x) (((x) & 1) << 23) +#define PM07_CTR_ENABLE(x) (((x) & 1) << 22) /* Macros for the pm_status register. */ #define CBE_PM_CTR_OVERFLOW_INTR(ctr) (1 << (31 - ((ctr) & 7))) @@ -89,8 +94,7 @@ extern void cbe_read_trace_buffer(u32 cpu, u64 *buf); extern void cbe_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask); extern void cbe_disable_pm_interrupts(u32 cpu); -extern u32 cbe_query_pm_interrupts(u32 cpu); -extern u32 cbe_clear_pm_interrupts(u32 cpu); +extern u32 cbe_get_and_clear_pm_interrupts(u32 cpu); extern void cbe_sync_irq(int node); /* Utility functions, macros */ @@ -103,11 +107,4 @@ extern u32 cbe_get_hw_thread_id(int cpu); #define CBE_COUNT_PROBLEM_MODE 2 #define CBE_COUNT_ALL_MODES 3 -/* Macros for the pm07_control registers. */ -#define PM07_CTR_INPUT_MUX(x) (((x) & 0x3F) << 26) -#define PM07_CTR_INPUT_CONTROL(x) (((x) & 1) << 25) -#define PM07_CTR_POLARITY(x) (((x) & 1) << 24) -#define PM07_CTR_COUNT_CYCLES(x) (((x) & 1) << 23) -#define PM07_CTR_ENABLE(x) (((x) & 1) << 22) - #endif /* __ASM_CELL_PMU_H__ */ -- cgit v0.10.2 From c7eb734766217b9ddac217cbccae3aedcfa67520 Mon Sep 17 00:00:00 2001 From: Maynard Johnson Date: Tue, 13 Feb 2007 22:02:03 +0100 Subject: [POWERPC] cell: pm_rtas_activat_signals routine cleanup The code was setting up the debug bus for group 21 when profiling on the event PPU CYCLES. The debug bus is not actually used by the hardware performance counters when counting PPU CYCLES. Setting up the debug bus for PPU CYCLES causes signal routing conflicts on the debug bus when profiling PPU cycles and another PPU event. This patch fixes the code to only setup the debug bus to route the performance signals for the non PPU CYCLE events. Signed-off-by: Maynard Johnson Signed-off-by: Carl Love Signed-off-by: Arnd Bergmann diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index 8d4a958..e08e1d7 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -39,6 +39,9 @@ #include "../platforms/cell/interrupt.h" #define PPU_CYCLES_EVENT_NUM 1 /* event number for CYCLES */ +#define PPU_CYCLES_GRP_NUM 1 /* special group number for identifying + * PPU_CYCLES event + */ #define CBE_COUNT_ALL_CYCLES 0x42800000 /* PPU cycle event specifier */ #define NUM_THREADS 2 /* number of physical threads in @@ -62,7 +65,7 @@ struct pmc_cntrl_data { struct pm_signal { u16 cpu; /* Processor to modify */ u16 sub_unit; /* hw subunit this applies to (if applicable) */ - u16 signal_group; /* Signal Group to Enable/Disable */ + short int signal_group; /* Signal Group to Enable/Disable */ u8 bus_word; /* Enable/Disable on this Trace/Trigger/Event * Bus Word(s) (bitmask) */ @@ -179,26 +182,40 @@ static void pm_rtas_reset_signals(u32 node) static void pm_rtas_activate_signals(u32 node, u32 count) { int ret; - int j; + int i, j; struct pm_signal pm_signal_local[NR_PHYS_CTRS]; + /* There is no debug setup required for the cycles event. + * Note that only events in the same group can be used. + * Otherwise, there will be conflicts in correctly routing + * the signals on the debug bus. It is the responsiblity + * of the OProfile user tool to check the events are in + * the same group. + */ + i = 0; for (j = 0; j < count; j++) { - /* fw expects physical cpu # */ - pm_signal_local[j].cpu = node; - pm_signal_local[j].signal_group - = pm_signal[j].signal_group; - pm_signal_local[j].bus_word = pm_signal[j].bus_word; - pm_signal_local[j].sub_unit = pm_signal[j].sub_unit; - pm_signal_local[j].bit = pm_signal[j].bit; + if (pm_signal[j].signal_group != PPU_CYCLES_GRP_NUM) { + + /* fw expects physical cpu # */ + pm_signal_local[i].cpu = node; + pm_signal_local[i].signal_group + = pm_signal[j].signal_group; + pm_signal_local[i].bus_word = pm_signal[j].bus_word; + pm_signal_local[i].sub_unit = pm_signal[j].sub_unit; + pm_signal_local[i].bit = pm_signal[j].bit; + i++; + } } - ret = rtas_ibm_cbe_perftools(SUBFUNC_ACTIVATE, PASSTHRU_ENABLE, - pm_signal_local, - count * sizeof(struct pm_signal)); + if (i != 0) { + ret = rtas_ibm_cbe_perftools(SUBFUNC_ACTIVATE, PASSTHRU_ENABLE, + pm_signal_local, + i * sizeof(struct pm_signal)); - if (ret) - printk(KERN_WARNING "%s: rtas returned: %d\n", - __FUNCTION__, ret); + if (ret) + printk(KERN_WARNING "%s: rtas returned: %d\n", + __FUNCTION__, ret); + } } /* @@ -215,7 +232,7 @@ static void set_pm_event(u32 ctr, int event, u32 unit_mask) /* Special Event: Count all cpu cycles */ pm_regs.pm07_cntrl[ctr] = CBE_COUNT_ALL_CYCLES; p = &(pm_signal[ctr]); - p->signal_group = 21; + p->signal_group = PPU_CYCLES_GRP_NUM; p->bus_word = 1; p->sub_unit = 0; p->bit = 0; -- cgit v0.10.2 From 69735698312f6f5e47001cf62dc678f591b6a6de Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 13 Feb 2007 22:08:57 +0100 Subject: i2c-ali1563: Improve the status messages Improve the status messages printed by the i2c-ali1563 driver. Signed-off-by: Jean Delvare Cc: Rudolf Marek diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index 8e1e3f8..3b0e79b 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -328,7 +328,6 @@ static int __devinit ali1563_setup(struct pci_dev * dev) u16 ctrl; pci_read_config_word(dev,ALI1563_SMBBA,&ctrl); - printk("ali1563: SMBus control = %04x\n",ctrl); /* Check if device is even enabled first */ if (!(ctrl & ALI1563_SMB_IOEN)) { @@ -353,9 +352,11 @@ static int __devinit ali1563_setup(struct pci_dev * dev) } if (!request_region(ali1563_smba, ALI1563_SMB_IOSIZE, ali1563_pci_driver.name)) { - dev_warn(&dev->dev,"Could not allocate I/O space"); + dev_err(&dev->dev, "Could not allocate I/O space at 0x%04x\n", + ali1563_smba); goto Err; } + dev_info(&dev->dev, "Found ALi1563 SMBus at 0x%04x\n", ali1563_smba); return 0; Err: @@ -384,13 +385,18 @@ static int __devinit ali1563_probe(struct pci_dev * dev, int error; if ((error = ali1563_setup(dev))) - return error; + goto exit; ali1563_adapter.dev.parent = &dev->dev; sprintf(ali1563_adapter.name,"SMBus ALi 1563 Adapter @ %04x", ali1563_smba); if ((error = i2c_add_adapter(&ali1563_adapter))) - ali1563_shutdown(dev); - printk("%s: Returning %d\n",__FUNCTION__,error); + goto exit_shutdown; + return 0; + +exit_shutdown: + ali1563_shutdown(dev); +exit: + dev_warn(&dev->dev, "ALi1563 SMBus probe failed (%d)\n", error); return error; } -- cgit v0.10.2 From 849be516c57501ec4729bde51babc25a7b073b65 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 13 Feb 2007 22:08:57 +0100 Subject: i2c-ali1563: Fix device initialization The i2c-ali1563 initialization looks quite broken to me: * If the I/O space isn't enabled, we forcibly set 3 bits in the PCI configuration space instead of just the one enabling the I/O space. * After that we pretend to check if the write worked, but we don't actually read the new value from the register. * It's probably not a good idea to enable the I/O space if no base address has been set. So I propose the following changes to that part of the driver: * Merge ali1563_enable() into ali1563_setup(). * Check the base address before the I/O space enabled bit. Signed-off-by: Jean Delvare Acked-by: Rudolf Marek diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index 3b0e79b..55ebbef 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -314,35 +314,12 @@ static u32 ali1563_func(struct i2c_adapter * a) } -static void ali1563_enable(struct pci_dev * dev) -{ - u16 ctrl; - - pci_read_config_word(dev,ALI1563_SMBBA,&ctrl); - ctrl |= 0x7; - pci_write_config_word(dev,ALI1563_SMBBA,ctrl); -} - static int __devinit ali1563_setup(struct pci_dev * dev) { u16 ctrl; pci_read_config_word(dev,ALI1563_SMBBA,&ctrl); - /* Check if device is even enabled first */ - if (!(ctrl & ALI1563_SMB_IOEN)) { - dev_warn(&dev->dev,"I/O space not enabled, trying manually\n"); - ali1563_enable(dev); - } - if (!(ctrl & ALI1563_SMB_IOEN)) { - dev_warn(&dev->dev,"I/O space still not enabled, giving up\n"); - goto Err; - } - if (!(ctrl & ALI1563_SMB_HOSTEN)) { - dev_warn(&dev->dev,"Host Controller not enabled\n"); - goto Err; - } - /* SMB I/O Base in high 12 bits and must be aligned with the * size of the I/O space. */ ali1563_smba = ctrl & ~(ALI1563_SMB_IOSIZE - 1); @@ -350,6 +327,24 @@ static int __devinit ali1563_setup(struct pci_dev * dev) dev_warn(&dev->dev,"ali1563_smba Uninitialized\n"); goto Err; } + + /* Check if device is enabled */ + if (!(ctrl & ALI1563_SMB_HOSTEN)) { + dev_warn(&dev->dev, "Host Controller not enabled\n"); + goto Err; + } + if (!(ctrl & ALI1563_SMB_IOEN)) { + dev_warn(&dev->dev, "I/O space not enabled, trying manually\n"); + pci_write_config_word(dev, ALI1563_SMBBA, + ctrl | ALI1563_SMB_IOEN); + pci_read_config_word(dev, ALI1563_SMBBA, &ctrl); + if (!(ctrl & ALI1563_SMB_IOEN)) { + dev_err(&dev->dev, "I/O space still not enabled, " + "giving up\n"); + goto Err; + } + } + if (!request_region(ali1563_smba, ALI1563_SMB_IOSIZE, ali1563_pci_driver.name)) { dev_err(&dev->dev, "Could not allocate I/O space at 0x%04x\n", -- cgit v0.10.2 From bbeaeef73a0b0a5c43ad2657b61857167d914a55 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 13 Feb 2007 22:08:58 +0100 Subject: i2c/vt8231: Remove superfluous initialization Remove a superfluous initialization from the vt8231 hwmon driver; the i2c core does this, and the source field will be vanishing soon. Signed-off-by: David Brownell Signed-off-by: Jean Delvare diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c index 93f93d4..a6a4aa0 100644 --- a/drivers/hwmon/vt8231.c +++ b/drivers/hwmon/vt8231.c @@ -727,7 +727,6 @@ int vt8231_detect(struct i2c_adapter *adapter) client->addr = isa_address; client->adapter = adapter; client->driver = &vt8231_driver; - client->dev.parent = &adapter->dev; /* Fill in the remaining client fields and put into the global list */ strlcpy(client->name, "vt8231", I2C_NAME_SIZE); -- cgit v0.10.2 From 4ef0ce90df3763e277b5307fb580ff1cdaaad7b2 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 13 Feb 2007 22:08:58 +0100 Subject: i2c-nforce2: Drop unused reference to pci_dev Signed-off-by: Jean Delvare Cc: Hans-Frieder Vogt diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index ad37c10..69d0730 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -57,7 +57,6 @@ MODULE_DESCRIPTION("nForce2/3/4/5xx SMBus driver"); struct nforce2_smbus { - struct pci_dev *dev; struct i2c_adapter adapter; int base; int size; @@ -230,7 +229,6 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar, smbus->base = iobase & PCI_BASE_ADDRESS_IO_MASK; smbus->size = 64; } - smbus->dev = dev; if (!request_region(smbus->base, smbus->size, nforce2_driver.name)) { dev_err(&smbus->adapter.dev, "Error requesting region %02x .. %02X for %s\n", -- cgit v0.10.2 From 4e6697fcc194db8b45559a9863947c6cbfeea363 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 13 Feb 2007 22:08:59 +0100 Subject: i2c-piix4: Add support for the ATI SB600 Add support for the ATI SB600 SMBus controller. Signed-off-by: Jean Delvare diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4 index 9214763..7cbe43f 100644 --- a/Documentation/i2c/busses/i2c-piix4 +++ b/Documentation/i2c/busses/i2c-piix4 @@ -6,7 +6,7 @@ Supported adapters: Datasheet: Publicly available at the Intel website * ServerWorks OSB4, CSB5, CSB6 and HT-1000 southbridges Datasheet: Only available via NDA from ServerWorks - * ATI IXP southbridges IXP200, IXP300, IXP400 + * ATI IXP200, IXP300, IXP400 and SB600 southbridges Datasheet: Not publicly available * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge Datasheet: Publicly available at the SMSC website http://www.smsc.com diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 9367c4c..f2894de 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -183,6 +183,7 @@ config I2C_PIIX4 ATI IXP200 ATI IXP300 ATI IXP400 + ATI SB600 Serverworks OSB4 Serverworks CSB5 Serverworks CSB6 diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 30c7a1b..07546c2 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -23,6 +23,7 @@ Supports: Intel PIIX4, 440MX Serverworks OSB4, CSB5, CSB6, HT-1000 + ATI IXP200, IXP300, IXP400, SB600 SMSC Victory66 Note: we assume there can only be one device, with one SMBus interface. @@ -396,6 +397,8 @@ static struct pci_device_id piix4_ids[] = { .driver_data = 0 }, { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS), .driver_data = 0 }, + { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SMBUS), + .driver_data = 0 }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4), .driver_data = 0 }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5), diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 8fb9c3e..182a96f 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -369,6 +369,7 @@ #define PCI_DEVICE_ID_ATI_IXP400_SATA2 0x437a #define PCI_DEVICE_ID_ATI_IXP600_SATA 0x4380 #define PCI_DEVICE_ID_ATI_IXP600_SRAID 0x4381 +#define PCI_DEVICE_ID_ATI_IXP600_SMBUS 0x4385 #define PCI_DEVICE_ID_ATI_IXP600_IDE 0x438c #define PCI_VENDOR_ID_VLSI 0x1004 -- cgit v0.10.2 From 3f9a4790a3818af1228c7fb4286afd66f3201fd0 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 13 Feb 2007 22:08:59 +0100 Subject: i2c: Fix typo in SMBus Write Word Data description Write data, don't read it. Signed-off-by: Mike Frysinger Signed-off-by: Jean Delvare diff --git a/Documentation/i2c/smbus-protocol b/Documentation/i2c/smbus-protocol index 09f5e5c..8a653c6 100644 --- a/Documentation/i2c/smbus-protocol +++ b/Documentation/i2c/smbus-protocol @@ -97,7 +97,7 @@ SMBus Write Word Data ===================== This is the opposite operation of the Read Word Data command. 16 bits -of data is read from a device, from a designated register that is +of data is written to a device, to the designated register that is specified through the Comm byte. S Addr Wr [A] Comm [A] DataLow [A] DataHigh [A] P -- cgit v0.10.2 From fcdd96ecaf04fb4f229ac1a64fe77fda890dffd5 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 13 Feb 2007 22:08:59 +0100 Subject: i2c-i801: Spelling fix Signed-off-by: Jean Delvare diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index ae625b8..de5e23a 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -123,7 +123,7 @@ static int i801_transaction(void) dev_dbg(&I801_dev->dev, "Failed! (%02x)\n", temp); return -1; } else { - dev_dbg(&I801_dev->dev, "Successfull!\n"); + dev_dbg(&I801_dev->dev, "Successful!\n"); } } -- cgit v0.10.2 From 099ab118b6b194ad43865f62776a0d36d4b1c7d2 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 13 Feb 2007 22:09:00 +0100 Subject: i2c-i801: Document the SMBus unhiding quirk This is a frequently asked question so it deserves a paragraph in the driver documentation. Signed-off-by: Jean Delvare diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index 3db69a0..c34f0db 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -48,14 +48,9 @@ following: The SMBus controller is function 3 in device 1f. Class 0c05 is SMBus Serial Controller. -If you do NOT see the 24x3 device at function 3, and you can't figure out -any way in the BIOS to enable it, - The ICH chips are quite similar to Intel's PIIX4 chip, at least in the SMBus controller. -See the file i2c-piix4 for some additional information. - Process Call Support -------------------- @@ -74,6 +69,61 @@ SMBus 2.0 Support The 82801DB (ICH4) and later chips support several SMBus 2.0 features. + +Hidden ICH SMBus +---------------- + +If your system has an Intel ICH south bridge, but you do NOT see the +SMBus device at 00:1f.3 in lspci, and you can't figure out any way in the +BIOS to enable it, it means it has been hidden by the BIOS code. Asus is +well known for first doing this on their P4B motherboard, and many other +boards after that. Some vendor machines are affected as well. + +The first thing to try is the "i2c_ec" ACPI driver. It could be that the +SMBus was hidden on purpose because it'll be driven by ACPI. If the +i2c_ec driver works for you, just forget about the i2c-i801 driver and +don't try to unhide the ICH SMBus. Even if i2c_ec doesn't work, you +better make sure that the SMBus isn't used by the ACPI code. Try loading +the "fan" and "thermal" drivers, and check in /proc/acpi/fan and +/proc/acpi/thermal_zone. If you find anything there, it's likely that +the ACPI is accessing the SMBus and it's safer not to unhide it. Only +once you are certain that ACPI isn't using the SMBus, you can attempt +to unhide it. + +In order to unhide the SMBus, we need to change the value of a PCI +register before the kernel enumerates the PCI devices. This is done in +drivers/pci/quirks.c, where all affected boards must be listed (see +function asus_hides_smbus_hostbridge.) If the SMBus device is missing, +and you think there's something interesting on the SMBus (e.g. a +hardware monitoring chip), you need to add your board to the list. + +The motherboard is identified using the subvendor and subdevice IDs of the +host bridge PCI device. Get yours with "lspci -n -v -s 00:00.0": + +00:00.0 Class 0600: 8086:2570 (rev 02) + Subsystem: 1043:80f2 + Flags: bus master, fast devsel, latency 0 + Memory at fc000000 (32-bit, prefetchable) [size=32M] + Capabilities: [e4] #09 [2106] + Capabilities: [a0] AGP version 3.0 + +Here the host bridge ID is 2570 (82865G/PE/P), the subvendor ID is 1043 +(Asus) and the subdevice ID is 80f2 (P4P800-X). You can find the symbolic +names for the bridge ID and the subvendor ID in include/linux/pci_ids.h, +and then add a case for your subdevice ID at the right place in +drivers/pci/quirks.c. Then please give it very good testing, to make sure +that the unhidden SMBus doesn't conflict with e.g. ACPI. + +If it works, proves useful (i.e. there are usable chips on the SMBus) +and seems safe, please submit a patch for inclusion into the kernel. + +Note: There's a useful script in lm_sensors 2.10.2 and later, named +unhide_ICH_SMBus (in prog/hotplug), which uses the fakephp driver to +temporarily unhide the SMBus without having to patch and recompile your +kernel. It's very convenient if you just want to check if there's +anything interesting on your hidden ICH SMBus. + + ********************** The lm_sensors project gratefully acknowledges the support of Texas Instruments in the initial development of this driver. -- cgit v0.10.2 From b8d6f45b32f6fe72bf7304183275e99332544ce1 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 13 Feb 2007 22:09:00 +0100 Subject: i2c: completion header cleanups i2c-core and i2c-isa use completions without including . Fix it. i2c-powermac includes but doesn't use any completion. Fix it. Signed-off-by: Jean Delvare Acked-by: Benjamin Herrenschmidt Cc: David Brownell diff --git a/drivers/i2c/busses/i2c-isa.c b/drivers/i2c/busses/i2c-isa.c index 8ed59a2..5f33bc9 100644 --- a/drivers/i2c/busses/i2c-isa.c +++ b/drivers/i2c/busses/i2c-isa.c @@ -39,6 +39,7 @@ #include #include #include +#include static u32 isa_func(struct i2c_adapter *adapter); diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c index 648d555..1425d224 100644 --- a/drivers/i2c/busses/i2c-powermac.c +++ b/drivers/i2c/busses/i2c-powermac.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index b05378a..60f6eb1 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -32,6 +32,7 @@ #include #include #include +#include #include -- cgit v0.10.2 From f37dd80ac2a67e4e4e921f99d34a1ceeb2488abb Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 13 Feb 2007 22:09:00 +0100 Subject: i2c: Add driver suspend/resume/shutdown support Driver model updates for the I2C core: - Add new suspend(), resume(), and shutdown() methods. Use them in the standard driver model style; document them. - Minor doc updates to highlight zero-initialized fields in drivers, and the driver model accessors for "clientdata". If any i2c drivers were previously using the old suspend/resume calls in "struct driver", they were getting warning messages ... and will now no longer work. Other than that, this patch changes no behaviors; and it lets I2C drivers use conventional PM and shutdown support. Signed-off-by: David Brownell Signed-off-by: Jean Delvare diff --git a/Documentation/i2c/porting-clients b/Documentation/i2c/porting-clients index f03c2a0..ca272b2 100644 --- a/Documentation/i2c/porting-clients +++ b/Documentation/i2c/porting-clients @@ -129,6 +129,12 @@ Technical changes: structure, those name member should be initialized to a driver name string. i2c_driver itself has no name member anymore. +* [Driver model] Instead of shutdown or reboot notifiers, provide a + shutdown() method in your driver. + +* [Power management] Use the driver model suspend() and resume() + callbacks instead of the obsolete pm_register() calls. + Coding policy: * [Copyright] Use (C), not (c), for copyright. diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients index 3a057c8..fbcff96 100644 --- a/Documentation/i2c/writing-clients +++ b/Documentation/i2c/writing-clients @@ -21,20 +21,26 @@ The driver structure Usually, you will implement a single driver structure, and instantiate all clients from it. Remember, a driver structure contains general access -routines, a client structure specific information like the actual I2C -address. +routines, and should be zero-initialized except for fields with data you +provide. A client structure holds device-specific information like the +driver model device node, and its I2C address. static struct i2c_driver foo_driver = { .driver = { .name = "foo", }, - .attach_adapter = &foo_attach_adapter, - .detach_client = &foo_detach_client, - .command = &foo_command /* may be NULL */ + .attach_adapter = foo_attach_adapter, + .detach_client = foo_detach_client, + .shutdown = foo_shutdown, /* optional */ + .suspend = foo_suspend, /* optional */ + .resume = foo_resume, /* optional */ + .command = foo_command, /* optional */ } -The name field must match the driver name, including the case. It must not -contain spaces, and may be up to 31 characters long. +The name field is the driver name, and must not contain spaces. It +should match the module name (if the driver can be compiled as a module), +although you can use MODULE_ALIAS (passing "foo" in this example) to add +another name for the module. All other fields are for call-back functions which will be explained below. @@ -43,11 +49,18 @@ below. Extra client data ================= -The client structure has a special `data' field that can point to any -structure at all. You can use this to keep client-specific data. You +Each client structure has a special `data' field that can point to any +structure at all. You should use this to keep device-specific data, +especially in drivers that handle multiple I2C or SMBUS devices. You do not always need this, but especially for `sensors' drivers, it can be very useful. + /* store the value */ + void i2c_set_clientdata(struct i2c_client *client, void *data); + + /* retrieve the value */ + void *i2c_get_clientdata(struct i2c_client *client); + An example structure is below. struct foo_data { @@ -493,6 +506,33 @@ by `__init_data'. Hose functions and structures can be removed after kernel booting (or module loading) is completed. +Power Management +================ + +If your I2C device needs special handling when entering a system low +power state -- like putting a transceiver into a low power mode, or +activating a system wakeup mechanism -- do that in the suspend() method. +The resume() method should reverse what the suspend() method does. + +These are standard driver model calls, and they work just like they +would for any other driver stack. The calls can sleep, and can use +I2C messaging to the device being suspended or resumed (since their +parent I2C adapter is active when these calls are issued, and IRQs +are still enabled). + + +System Shutdown +=============== + +If your I2C device needs special handling when the system shuts down +or reboots (including kexec) -- like turning something off -- use a +shutdown() method. + +Again, this is a standard driver model call, working just like it +would for any other driver stack: the calls can sleep, and can use +I2C messaging. + + Command function ================ diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 60f6eb1..9653f7f 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -41,49 +41,72 @@ static LIST_HEAD(drivers); static DEFINE_MUTEX(core_lists); static DEFINE_IDR(i2c_adapter_idr); + +/* ------------------------------------------------------------------------- */ + /* match always succeeds, as we want the probe() to tell if we really accept this match */ static int i2c_device_match(struct device *dev, struct device_driver *drv) { return 1; } -static int i2c_bus_suspend(struct device * dev, pm_message_t state) +static int i2c_device_probe(struct device *dev) { - int rc = 0; + return -ENODEV; +} - if (dev->driver && dev->driver->suspend) - rc = dev->driver->suspend(dev, state); - return rc; +static int i2c_device_remove(struct device *dev) +{ + return 0; } -static int i2c_bus_resume(struct device * dev) +static void i2c_device_shutdown(struct device *dev) { - int rc = 0; - - if (dev->driver && dev->driver->resume) - rc = dev->driver->resume(dev); - return rc; + struct i2c_driver *driver; + + if (!dev->driver) + return; + driver = to_i2c_driver(dev->driver); + if (driver->shutdown) + driver->shutdown(to_i2c_client(dev)); } -static int i2c_device_probe(struct device *dev) +static int i2c_device_suspend(struct device * dev, pm_message_t mesg) { - return -ENODEV; + struct i2c_driver *driver; + + if (!dev->driver) + return 0; + driver = to_i2c_driver(dev->driver); + if (!driver->suspend) + return 0; + return driver->suspend(to_i2c_client(dev), mesg); } -static int i2c_device_remove(struct device *dev) +static int i2c_device_resume(struct device * dev) { - return 0; + struct i2c_driver *driver; + + if (!dev->driver) + return 0; + driver = to_i2c_driver(dev->driver); + if (!driver->resume) + return 0; + return driver->resume(to_i2c_client(dev)); } struct bus_type i2c_bus_type = { - .name = "i2c", - .match = i2c_device_match, - .probe = i2c_device_probe, - .remove = i2c_device_remove, - .suspend = i2c_bus_suspend, - .resume = i2c_bus_resume, + .name = "i2c", + .match = i2c_device_match, + .probe = i2c_device_probe, + .remove = i2c_device_remove, + .shutdown = i2c_device_shutdown, + .suspend = i2c_device_suspend, + .resume = i2c_device_resume, }; +/* ------------------------------------------------------------------------- */ + void i2c_adapter_dev_release(struct device *dev) { struct i2c_adapter *adap = dev_to_i2c_adapter(dev); diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 71e50d3..9428092 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -125,7 +125,12 @@ struct i2c_driver { * it must be freed here. */ int (*detach_client)(struct i2c_client *); - + + /* driver model interfaces that don't relate to enumeration */ + void (*shutdown)(struct i2c_client *); + int (*suspend)(struct i2c_client *, pm_message_t mesg); + int (*resume)(struct i2c_client *); + /* a ioctl like command that can be used to perform specific functions * with the device. */ -- cgit v0.10.2 From a394ae15427f215b43fca21f3c9370b0e63ba252 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 13 Feb 2007 22:09:01 +0100 Subject: i2c: Update the list of bus IDs * The Voodoo3 has no SMBus, it has two bit-banged busses which already have an ID assigned (I2C_HW_B_VOO). * The i2c-ipmi bus driver was a non-sense, it'll never be ported to Linux 2.6. Signed-off-by: Jean Delvare Acked-by: Yani Ioannou diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index 6e7ec4c..b65c1c9 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -232,7 +232,6 @@ #define I2C_HW_SMBUS_PIIX4 0x040000 #define I2C_HW_SMBUS_ALI15X3 0x040001 #define I2C_HW_SMBUS_VIA2 0x040002 -#define I2C_HW_SMBUS_VOODOO3 0x040003 #define I2C_HW_SMBUS_I801 0x040004 #define I2C_HW_SMBUS_AMD756 0x040005 #define I2C_HW_SMBUS_SIS5595 0x040006 @@ -252,9 +251,6 @@ /* --- ISA pseudo-adapter */ #define I2C_HW_ISA 0x050000 -/* --- IPMI pseudo-adapter */ -#define I2C_HW_IPMI 0x0b0000 - /* --- IPMB adapter */ #define I2C_HW_IPMB 0x0c0000 -- cgit v0.10.2 From 9ace555d7d87c55ceab6999be444c9a17e0e79b4 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 13 Feb 2007 22:09:01 +0100 Subject: i2c: Add IDs to adapters IDs have been defined but not used by most of the I2C adapters. By having a unique ID, clients can check for correct connection during probe. Signed-off-by: Stephen Hemminger Signed-off-by: Jean Delvare diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index e75d339..0b0a87b 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -475,6 +475,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter ali1535_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_SMBUS_ALI1535, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index 55ebbef..6b68074 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -370,6 +370,7 @@ static const struct i2c_algorithm ali1563_algorithm = { static struct i2c_adapter ali1563_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_SMBUS_ALI1563, .class = I2C_CLASS_HWMON, .algo = &ali1563_algorithm, }; diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index 3f11b6e..c537441 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -470,6 +470,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter ali15x3_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_SMBUS_ALI15X3, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index 2d21afd..91fbc0e 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -301,6 +301,7 @@ static const struct i2c_algorithm smbus_algorithm = { struct i2c_adapter amd756_smbus = { .owner = THIS_MODULE, + .id = I2C_HW_SMBUS_AMD756, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index 0fbc718..21f8a82 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -351,6 +351,7 @@ static int __devinit amd8111_probe(struct pci_dev *dev, const struct pci_device_ smbus->adapter.owner = THIS_MODULE; snprintf(smbus->adapter.name, I2C_NAME_SIZE, "SMBus2 AMD8111 adapter at %04x", smbus->base); + smbus->adapter.id = I2C_HW_SMBUS_AMD8111; smbus->adapter.class = I2C_CLASS_HWMON; smbus->adapter.algo = &smbus_algorithm; smbus->adapter.algo_data = smbus; diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index de5e23a..8c3569a 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -442,6 +442,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter i801_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_SMBUS_I801, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-i810.c b/drivers/i2c/busses/i2c-i810.c index 10c98bc..42e8d94 100644 --- a/drivers/i2c/busses/i2c-i810.c +++ b/drivers/i2c/busses/i2c-i810.c @@ -171,6 +171,7 @@ static struct i2c_algo_bit_data i810_i2c_bit_data = { static struct i2c_adapter i810_i2c_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_B_I810, .name = "I810/I815 I2C Adapter", .algo_data = &i810_i2c_bit_data, }; @@ -186,6 +187,7 @@ static struct i2c_algo_bit_data i810_ddc_bit_data = { static struct i2c_adapter i810_ddc_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_B_I810, .name = "I810/I815 DDC Adapter", .algo_data = &i810_ddc_bit_data, }; diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index 69d0730..6535551 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -236,6 +236,7 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar, return -1; } smbus->adapter.owner = THIS_MODULE; + smbus->adapter.id = I2C_HW_SMBUS_NFORCE2; smbus->adapter.class = I2C_CLASS_HWMON; smbus->adapter.algo = &smbus_algorithm; smbus->adapter.algo_data = smbus; diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 07546c2..03d0aee 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -384,6 +384,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter piix4_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_SMBUS_PIIX4, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-savage4.c b/drivers/i2c/busses/i2c-savage4.c index 844b4ff..b7fb65c 100644 --- a/drivers/i2c/busses/i2c-savage4.c +++ b/drivers/i2c/busses/i2c-savage4.c @@ -145,6 +145,7 @@ static struct i2c_algo_bit_data sav_i2c_bit_data = { static struct i2c_adapter savage4_i2c_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_B_SAVAGE, .name = "I2C Savage4 adapter", .algo_data = &sav_i2c_bit_data, }; diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index 38bbfd8..d333bab 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -365,6 +365,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis5595_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_SMBUS_SIS5595, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index dec0baf..172bacf 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -457,6 +457,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis630_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_SMBUS_SIS630, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index 7fd07fb..869a635 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -249,6 +249,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis96x_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_SMBUS_SIS96X, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c index 15d7e00..bbcc621 100644 --- a/drivers/i2c/busses/i2c-via.c +++ b/drivers/i2c/busses/i2c-via.c @@ -86,6 +86,7 @@ static struct i2c_algo_bit_data bit_data = { static struct i2c_adapter vt586b_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_B_VIA, .class = I2C_CLASS_HWMON, .name = "VIA i2c", .algo_data = &bit_data, diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index efc6bbf..43a081f 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -306,6 +306,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter vt596_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_SMBUS_VIA2, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c index b0377b8..88a3447 100644 --- a/drivers/i2c/busses/i2c-voodoo3.c +++ b/drivers/i2c/busses/i2c-voodoo3.c @@ -165,6 +165,7 @@ static struct i2c_algo_bit_data voo_i2c_bit_data = { static struct i2c_adapter voodoo3_i2c_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_B_VOO, .class = I2C_CLASS_TV_ANALOG, .name = "I2C Voodoo3/Banshee adapter", .algo_data = &voo_i2c_bit_data, @@ -181,6 +182,7 @@ static struct i2c_algo_bit_data voo_ddc_bit_data = { static struct i2c_adapter voodoo3_ddc_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_B_VOO, .class = I2C_CLASS_DDC, .name = "DDC Voodoo3/Banshee adapter", .algo_data = &voo_ddc_bit_data, diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c index 6cd96e4..c3022a0 100644 --- a/drivers/i2c/busses/scx200_i2c.c +++ b/drivers/i2c/busses/scx200_i2c.c @@ -81,6 +81,7 @@ static struct i2c_algo_bit_data scx200_i2c_data = { static struct i2c_adapter scx200_i2c_ops = { .owner = THIS_MODULE, + .id = I2C_HW_B_SCX200, .algo_data = &scx200_i2c_data, .name = "NatSemi SCx200 I2C", }; diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index b65c1c9..9c21dc7 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -247,6 +247,7 @@ #define I2C_HW_SMBUS_OV519 0x040010 /* OV519 USB 1.1 webcam IC */ #define I2C_HW_SMBUS_OVFX2 0x040011 /* Cypress/OmniVision FX2 webcam */ #define I2C_HW_SMBUS_CAFE 0x040012 /* Marvell 88ALP01 "CAFE" cam */ +#define I2C_HW_SMBUS_ALI1563 0x040013 /* --- ISA pseudo-adapter */ #define I2C_HW_ISA 0x050000 -- cgit v0.10.2 From ab6a6ed271c757b429ddc68f5b93a41f9592ab8b Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 13 Feb 2007 22:09:02 +0100 Subject: i2c-viapro: Add support for the VIA CX700 south bridge We do not have any documentation for the CX700, but it was reported to work fine. Thanks to Claas Langbehn for testing. Signed-off-by: Jean Delvare diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro index 2568034..775f489 100644 --- a/Documentation/i2c/busses/i2c-viapro +++ b/Documentation/i2c/busses/i2c-viapro @@ -13,6 +13,9 @@ Supported adapters: * VIA Technologies, Inc. VT8235, VT8237R, VT8237A, VT8251 Datasheet: available on request and under NDA from VIA + * VIA Technologies, Inc. CX700 + Datasheet: available on request and under NDA from VIA + Authors: Kyösti Mälkki , Mark D. Studebaker , @@ -44,6 +47,7 @@ Your lspci -n listing must show one of these : device 1106:3227 (VT8237R) device 1106:3337 (VT8237A) device 1106:3287 (VT8251) + device 1106:8324 (CX700) If none of these show up, you should look in the BIOS for settings like enable ACPI / SMBus or even USB. @@ -51,3 +55,6 @@ enable ACPI / SMBus or even USB. Except for the oldest chips (VT82C596A/B, VT82C686A and most probably VT8231), this driver supports I2C block transactions. Such transactions are mainly useful to read from and write to EEPROMs. + +The CX700 additionally appears to support SMBus PEC, although this driver +doesn't implement it yet. diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index f2894de..25d52e0 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -500,11 +500,11 @@ config I2C_VIA will be called i2c-via. config I2C_VIAPRO - tristate "VIA 82C596/82C686/82xx" + tristate "VIA VT82C596/82C686/82xx and CX700" depends on I2C && PCI help If you say yes to this option, support will be included for the VIA - 82C596/82C686/82xx I2C interfaces. Specifically, the following + VT82C596 and later SMBus interface. Specifically, the following chipsets are supported: VT82C596A/B VT82C686A/B @@ -513,6 +513,7 @@ config I2C_VIAPRO VT8235 VT8237R/A VT8251 + CX700 This driver can also be built as a module. If so, the module will be called i2c-viapro. diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 43a081f..03c5fc8 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -4,7 +4,7 @@ Copyright (c) 1998 - 2002 Frodo Looijaard , Philip Edelbrock , Kyösti Mälkki , Mark D. Studebaker - Copyright (C) 2005 Jean Delvare + Copyright (C) 2005 - 2007 Jean Delvare This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -36,6 +36,7 @@ VT8237R 0x3227 yes VT8237A 0x3337 yes VT8251 0x3287 yes + CX700 0x8324 yes Note: we assume there can only be one device, with one SMBus interface. */ @@ -384,6 +385,7 @@ found: dev_dbg(&pdev->dev, "VT596_smba = 0x%X\n", vt596_smba); switch (pdev->device) { + case PCI_DEVICE_ID_VIA_CX700: case PCI_DEVICE_ID_VIA_8251: case PCI_DEVICE_ID_VIA_8237: case PCI_DEVICE_ID_VIA_8237A: @@ -443,6 +445,8 @@ static struct pci_device_id vt596_ids[] = { .driver_data = SMBBA1 }, { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8251), .driver_data = SMBBA3 }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CX700), + .driver_data = SMBBA3 }, { 0, } }; -- cgit v0.10.2 From 55249cf750e4d9be19c7f8afd502c9ca42de8858 Mon Sep 17 00:00:00 2001 From: Jonathan McDowell Date: Tue, 13 Feb 2007 22:09:02 +0100 Subject: i2c-parport: Add support for One For All remote JP1 interface This simple patch adds support to i2c-parport for the One For All remote JP1 parallel port interfaces which can be found detailed at: http://www.hifi-remote.com/jp1/hardware.shtml These allow access to the internal configuration EEPROM on various remote controls and there are a variety of Windows tools that make use of this hardware. I have tested this patch with the "simple" parallel port device and a One For All URC-7562 and confirmed that the data read using the eeprom i2c driver matches that returned by the Windows "IR" JP1 tool. Signed-off-by: Jonathan McDowell Signed-off-by: Jean Delvare diff --git a/Documentation/i2c/busses/i2c-parport b/Documentation/i2c/busses/i2c-parport index 77b995d..dceaba1 100644 --- a/Documentation/i2c/busses/i2c-parport +++ b/Documentation/i2c/busses/i2c-parport @@ -19,6 +19,7 @@ It currently supports the following devices: * (type=4) Analog Devices ADM1032 evaluation board * (type=5) Analog Devices evaluation boards: ADM1025, ADM1030, ADM1031 * (type=6) Barco LPT->DVI (K5800236) adapter + * (type=7) One For All JP1 parallel port adapter These devices use different pinout configurations, so you have to tell the driver what you have, using the type module parameter. There is no @@ -157,3 +158,17 @@ many more, using /dev/velleman. http://home.wanadoo.nl/hihihi/libk8005.htm http://struyve.mine.nu:8080/index.php?block=k8000 http://sourceforge.net/projects/libk8005/ + + +One For All JP1 parallel port adapter +------------------------------------- + +The JP1 project revolves around a set of remote controls which expose +the I2C bus their internal configuration EEPROM lives on via a 6 pin +jumper in the battery compartment. More details can be found at: + +http://www.hifi-remote.com/jp1/ + +Details of the simple parallel port hardware can be found at: + +http://www.hifi-remote.com/jp1/hardware.shtml diff --git a/drivers/i2c/busses/i2c-parport.h b/drivers/i2c/busses/i2c-parport.h index 9ddd816..ed69d84 100644 --- a/drivers/i2c/busses/i2c-parport.h +++ b/drivers/i2c/busses/i2c-parport.h @@ -88,6 +88,13 @@ static struct adapter_parm adapter_parm[] = { .getscl = { 0x40, STAT, 0 }, .init = { 0xfc, DATA, 0 }, }, + /* type 7: One For All JP1 parallel port adapter */ + { + .setsda = { 0x01, DATA, 0 }, + .setscl = { 0x02, DATA, 0 }, + .getsda = { 0x80, STAT, 1 }, + .init = { 0x04, DATA, 1 }, + }, }; static int type = -1; @@ -101,4 +108,5 @@ MODULE_PARM_DESC(type, " 4 = ADM1032 evaluation board\n" " 5 = ADM1025, ADM1030 and ADM1031 evaluation boards\n" " 6 = Barco LPT->DVI (K5800236) adapter\n" + " 7 = One For All JP1 parallel port adapter\n" ); -- cgit v0.10.2 From 88b9e750e974febd9128fc622109c526a9d22c10 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 13 Feb 2007 22:09:02 +0100 Subject: i2c-amd8111: Proposed cleanups Proposed cleanups to the i2c-amd8111 SMBus driver: * Fold long lines. * Add an explicit mask when writing the low byte of a word. * Use I2C_SMBUS_BLOCK_MAX instead of hardcoding 32. * Discard extra blank lines. * Use boolean not instead of bitwise not for bit tests, it's clearer. * Return -EBUSY rather than -1 on I/O resource conflict. * Fix a race on device registration, initialization should be done before the bus is registered. Signed-off-by: Jean Delvare diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index 21f8a82..14ad991 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -76,7 +76,8 @@ static unsigned int amd_ec_wait_write(struct amd_smbus *smbus) udelay(1); if (!timeout) { - dev_warn(&smbus->dev->dev, "Timeout while waiting for IBF to clear\n"); + dev_warn(&smbus->dev->dev, + "Timeout while waiting for IBF to clear\n"); return -1; } @@ -91,14 +92,16 @@ static unsigned int amd_ec_wait_read(struct amd_smbus *smbus) udelay(1); if (!timeout) { - dev_warn(&smbus->dev->dev, "Timeout while waiting for OBF to set\n"); + dev_warn(&smbus->dev->dev, + "Timeout while waiting for OBF to set\n"); return -1; } return 0; } -static unsigned int amd_ec_read(struct amd_smbus *smbus, unsigned char address, unsigned char *data) +static unsigned int amd_ec_read(struct amd_smbus *smbus, unsigned char address, + unsigned char *data) { if (amd_ec_wait_write(smbus)) return -1; @@ -115,7 +118,8 @@ static unsigned int amd_ec_read(struct amd_smbus *smbus, unsigned char address, return 0; } -static unsigned int amd_ec_write(struct amd_smbus *smbus, unsigned char address, unsigned char data) +static unsigned int amd_ec_write(struct amd_smbus *smbus, unsigned char address, + unsigned char data) { if (amd_ec_wait_write(smbus)) return -1; @@ -175,18 +179,19 @@ static unsigned int amd_ec_write(struct amd_smbus *smbus, unsigned char address, #define AMD_SMB_PRTCL_PEC 0x80 -static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, - char read_write, u8 command, int size, union i2c_smbus_data * data) +static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, + unsigned short flags, char read_write, u8 command, int size, + union i2c_smbus_data * data) { struct amd_smbus *smbus = adap->algo_data; unsigned char protocol, len, pec, temp[2]; int i; - protocol = (read_write == I2C_SMBUS_READ) ? AMD_SMB_PRTCL_READ : AMD_SMB_PRTCL_WRITE; + protocol = (read_write == I2C_SMBUS_READ) ? AMD_SMB_PRTCL_READ + : AMD_SMB_PRTCL_WRITE; pec = (flags & I2C_CLIENT_PEC) ? AMD_SMB_PRTCL_PEC : 0; switch (size) { - case I2C_SMBUS_QUICK: protocol |= AMD_SMB_PRTCL_QUICK; read_write = I2C_SMBUS_WRITE; @@ -208,8 +213,10 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl case I2C_SMBUS_WORD_DATA: amd_ec_write(smbus, AMD_SMB_CMD, command); if (read_write == I2C_SMBUS_WRITE) { - amd_ec_write(smbus, AMD_SMB_DATA, data->word); - amd_ec_write(smbus, AMD_SMB_DATA + 1, data->word >> 8); + amd_ec_write(smbus, AMD_SMB_DATA, + data->word & 0xff); + amd_ec_write(smbus, AMD_SMB_DATA + 1, + data->word >> 8); } protocol |= AMD_SMB_PRTCL_WORD_DATA | pec; break; @@ -217,27 +224,31 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl case I2C_SMBUS_BLOCK_DATA: amd_ec_write(smbus, AMD_SMB_CMD, command); if (read_write == I2C_SMBUS_WRITE) { - len = min_t(u8, data->block[0], 32); + len = min_t(u8, data->block[0], + I2C_SMBUS_BLOCK_MAX); amd_ec_write(smbus, AMD_SMB_BCNT, len); for (i = 0; i < len; i++) - amd_ec_write(smbus, AMD_SMB_DATA + i, data->block[i + 1]); + amd_ec_write(smbus, AMD_SMB_DATA + i, + data->block[i + 1]); } protocol |= AMD_SMB_PRTCL_BLOCK_DATA | pec; break; case I2C_SMBUS_I2C_BLOCK_DATA: - len = min_t(u8, data->block[0], 32); + len = min_t(u8, data->block[0], + I2C_SMBUS_BLOCK_MAX); amd_ec_write(smbus, AMD_SMB_CMD, command); amd_ec_write(smbus, AMD_SMB_BCNT, len); if (read_write == I2C_SMBUS_WRITE) for (i = 0; i < len; i++) - amd_ec_write(smbus, AMD_SMB_DATA + i, data->block[i + 1]); + amd_ec_write(smbus, AMD_SMB_DATA + i, + data->block[i + 1]); protocol |= AMD_SMB_PRTCL_I2C_BLOCK_DATA; break; case I2C_SMBUS_PROC_CALL: amd_ec_write(smbus, AMD_SMB_CMD, command); - amd_ec_write(smbus, AMD_SMB_DATA, data->word); + amd_ec_write(smbus, AMD_SMB_DATA, data->word & 0xff); amd_ec_write(smbus, AMD_SMB_DATA + 1, data->word >> 8); protocol = AMD_SMB_PRTCL_PROC_CALL | pec; read_write = I2C_SMBUS_READ; @@ -248,7 +259,8 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl amd_ec_write(smbus, AMD_SMB_CMD, command); amd_ec_write(smbus, AMD_SMB_BCNT, len); for (i = 0; i < len; i++) - amd_ec_write(smbus, AMD_SMB_DATA + i, data->block[i + 1]); + amd_ec_write(smbus, AMD_SMB_DATA + i, + data->block[i + 1]); protocol = AMD_SMB_PRTCL_BLOCK_PROC_CALL | pec; read_write = I2C_SMBUS_READ; break; @@ -280,7 +292,6 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl return 0; switch (size) { - case I2C_SMBUS_BYTE: case I2C_SMBUS_BYTE_DATA: amd_ec_read(smbus, AMD_SMB_DATA, &data->byte); @@ -296,10 +307,11 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl case I2C_SMBUS_BLOCK_DATA: case I2C_SMBUS_BLOCK_PROC_CALL: amd_ec_read(smbus, AMD_SMB_BCNT, &len); - len = min_t(u8, len, 32); + len = min_t(u8, len, I2C_SMBUS_BLOCK_MAX); case I2C_SMBUS_I2C_BLOCK_DATA: for (i = 0; i < len; i++) - amd_ec_read(smbus, AMD_SMB_DATA + i, data->block + i + 1); + amd_ec_read(smbus, AMD_SMB_DATA + i, + data->block + i + 1); data->block[0] = len; break; } @@ -310,7 +322,8 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl static u32 amd8111_func(struct i2c_adapter *adapter) { - return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_BLOCK_PROC_CALL | I2C_FUNC_SMBUS_I2C_BLOCK | I2C_FUNC_SMBUS_HWPEC_CALC; @@ -329,12 +342,13 @@ static struct pci_device_id amd8111_ids[] = { MODULE_DEVICE_TABLE (pci, amd8111_ids); -static int __devinit amd8111_probe(struct pci_dev *dev, const struct pci_device_id *id) +static int __devinit amd8111_probe(struct pci_dev *dev, + const struct pci_device_id *id) { struct amd_smbus *smbus; - int error = -ENODEV; + int error; - if (~pci_resource_flags(dev, 0) & IORESOURCE_IO) + if (!(pci_resource_flags(dev, 0) & IORESOURCE_IO)) return -ENODEV; smbus = kzalloc(sizeof(struct amd_smbus), GFP_KERNEL); @@ -345,8 +359,10 @@ static int __devinit amd8111_probe(struct pci_dev *dev, const struct pci_device_ smbus->base = pci_resource_start(dev, 0); smbus->size = pci_resource_len(dev, 0); - if (!request_region(smbus->base, smbus->size, amd8111_driver.name)) + if (!request_region(smbus->base, smbus->size, amd8111_driver.name)) { + error = -EBUSY; goto out_kfree; + } smbus->adapter.owner = THIS_MODULE; snprintf(smbus->adapter.name, I2C_NAME_SIZE, @@ -359,11 +375,11 @@ static int __devinit amd8111_probe(struct pci_dev *dev, const struct pci_device_ /* set up the driverfs linkage to our parent device */ smbus->adapter.dev.parent = &dev->dev; + pci_write_config_dword(smbus->dev, AMD_PCI_MISC, 0); error = i2c_add_adapter(&smbus->adapter); if (error) goto out_release_region; - pci_write_config_dword(smbus->dev, AMD_PCI_MISC, 0); pci_set_drvdata(dev, smbus); return 0; @@ -371,10 +387,9 @@ static int __devinit amd8111_probe(struct pci_dev *dev, const struct pci_device_ release_region(smbus->base, smbus->size); out_kfree: kfree(smbus); - return -1; + return error; } - static void __devexit amd8111_remove(struct pci_dev *dev) { struct amd_smbus *smbus = pci_get_drvdata(dev); @@ -396,7 +411,6 @@ static int __init i2c_amd8111_init(void) return pci_register_driver(&amd8111_driver); } - static void __exit i2c_amd8111_exit(void) { pci_unregister_driver(&amd8111_driver); -- cgit v0.10.2 From beb58aa39e6e5a52875defe12c7697b0bfa95d4c Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Tue, 13 Feb 2007 22:09:03 +0100 Subject: i2c: PA Semi SMBus driver New driver for the PA Semi SMBus interfaces. Signed-off-by: Olof Johansson Signed-off-by: Jean Delvare diff --git a/MAINTAINERS b/MAINTAINERS index f85c603..93a338d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2523,6 +2523,12 @@ M: olof@lixom.net L: netdev@vger.kernel.org S: Maintained +PA SEMI SMBUS DRIVER +P: Olof Johansson +M: olof@lixom.net +L: i2c@lm-sensors.org +S: Maintained + PARALLEL PORT SUPPORT P: Phil Blundell M: philb@gnu.org diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 25d52e0..4d44a2d 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -342,6 +342,13 @@ config I2C_PARPORT_LIGHT This support is also available as a module. If so, the module will be called i2c-parport-light. +config I2C_PASEMI + tristate "PA Semi SMBus interface" +# depends on PPC_PASEMI && I2C && PCI + depends on I2C && PCI + help + Supports the PA Semi PWRficient on-chip SMBus interfaces. + config I2C_PROSAVAGE tristate "S3/VIA (Pro)Savage" depends on I2C && PCI diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 37196c1..03505aa 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_I2C_OCORES) += i2c-ocores.o obj-$(CONFIG_I2C_OMAP) += i2c-omap.o obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o +obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o obj-$(CONFIG_I2C_PNX) += i2c-pnx.o diff --git a/drivers/i2c/busses/i2c-pasemi.c b/drivers/i2c/busses/i2c-pasemi.c new file mode 100644 index 0000000..f54fb5d --- /dev/null +++ b/drivers/i2c/busses/i2c-pasemi.c @@ -0,0 +1,426 @@ +/* + * Copyright (C) 2006-2007 PA Semi, Inc + * + * SMBus host driver for PA Semi PWRficient + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +static struct pci_driver pasemi_smb_driver; + +struct pasemi_smbus { + struct pci_dev *dev; + struct i2c_adapter adapter; + unsigned long base; + int size; +}; + +/* Register offsets */ +#define REG_MTXFIFO 0x00 +#define REG_MRXFIFO 0x04 +#define REG_SMSTA 0x14 +#define REG_CTL 0x1c + +/* Register defs */ +#define MTXFIFO_READ 0x00000400 +#define MTXFIFO_STOP 0x00000200 +#define MTXFIFO_START 0x00000100 +#define MTXFIFO_DATA_M 0x000000ff + +#define MRXFIFO_EMPTY 0x00000100 +#define MRXFIFO_DATA_M 0x000000ff + +#define SMSTA_XEN 0x08000000 + +#define CTL_MRR 0x00000400 +#define CTL_MTR 0x00000200 +#define CTL_CLK_M 0x000000ff + +#define CLK_100K_DIV 84 +#define CLK_400K_DIV 21 + +static inline void reg_write(struct pasemi_smbus *smbus, int reg, int val) +{ + dev_dbg(&smbus->dev->dev, "smbus write reg %lx val %08x\n", + smbus->base + reg, val); + outl(val, smbus->base + reg); +} + +static inline int reg_read(struct pasemi_smbus *smbus, int reg) +{ + int ret; + ret = inl(smbus->base + reg); + dev_dbg(&smbus->dev->dev, "smbus read reg %lx val %08x\n", + smbus->base + reg, ret); + return ret; +} + +#define TXFIFO_WR(smbus, reg) reg_write((smbus), REG_MTXFIFO, (reg)) +#define RXFIFO_RD(smbus) reg_read((smbus), REG_MRXFIFO) + +static void pasemi_smb_clear(struct pasemi_smbus *smbus) +{ + unsigned int status; + + status = reg_read(smbus, REG_SMSTA); + reg_write(smbus, REG_SMSTA, status); +} + +static unsigned int pasemi_smb_waitready(struct pasemi_smbus *smbus) +{ + int timeout = 10; + unsigned int status; + + status = reg_read(smbus, REG_SMSTA); + + while (!(status & SMSTA_XEN) && timeout--) { + msleep(1); + status = reg_read(smbus, REG_SMSTA); + } + + if (timeout < 0) { + dev_warn(&smbus->dev->dev, "Timeout, status 0x%08x\n", status); + reg_write(smbus, REG_SMSTA, status); + return -ETIME; + } + + /* Clear XEN */ + reg_write(smbus, REG_SMSTA, SMSTA_XEN); + + return 0; +} + +static int pasemi_i2c_xfer_msg(struct i2c_adapter *adapter, + struct i2c_msg *msg, int stop) +{ + struct pasemi_smbus *smbus = adapter->algo_data; + int read, i, err; + u32 rd; + + read = msg->flags & I2C_M_RD ? 1 : 0; + + TXFIFO_WR(smbus, MTXFIFO_START | (msg->addr << 1) | read); + + if (read) { + TXFIFO_WR(smbus, msg->len | MTXFIFO_READ | + (stop ? MTXFIFO_STOP : 0)); + + err = pasemi_smb_waitready(smbus); + if (err) + goto reset_out; + + for (i = 0; i < msg->len; i++) { + rd = RXFIFO_RD(smbus); + if (rd & MRXFIFO_EMPTY) { + err = -ENODATA; + goto reset_out; + } + msg->buf[i] = rd & MRXFIFO_DATA_M; + } + } else { + for (i = 0; i < msg->len - 1; i++) + TXFIFO_WR(smbus, msg->buf[i]); + + TXFIFO_WR(smbus, msg->buf[msg->len] | + (stop ? MTXFIFO_STOP : 0)); + } + + return 0; + + reset_out: + reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR | + (CLK_100K_DIV & CTL_CLK_M))); + return err; +} + +static int pasemi_i2c_xfer(struct i2c_adapter *adapter, + struct i2c_msg *msgs, int num) +{ + struct pasemi_smbus *smbus = adapter->algo_data; + int ret, i; + + pasemi_smb_clear(smbus); + + ret = 0; + + for (i = 0; i < num && !ret; i++) + ret = pasemi_i2c_xfer_msg(adapter, &msgs[i], (i == (num - 1))); + + return ret ? ret : num; +} + +static int pasemi_smb_xfer(struct i2c_adapter *adapter, + u16 addr, unsigned short flags, char read_write, u8 command, + int size, union i2c_smbus_data *data) +{ + struct pasemi_smbus *smbus = adapter->algo_data; + unsigned int rd; + int read_flag, err; + int len = 0, i; + + /* All our ops take 8-bit shifted addresses */ + addr <<= 1; + read_flag = read_write == I2C_SMBUS_READ; + + pasemi_smb_clear(smbus); + + switch (size) { + case I2C_SMBUS_QUICK: + TXFIFO_WR(smbus, addr | read_flag | MTXFIFO_START | + MTXFIFO_STOP); + break; + case I2C_SMBUS_BYTE: + TXFIFO_WR(smbus, addr | read_flag | MTXFIFO_START); + if (read_write) + TXFIFO_WR(smbus, 1 | MTXFIFO_STOP | MTXFIFO_READ); + else + TXFIFO_WR(smbus, MTXFIFO_STOP | command); + break; + case I2C_SMBUS_BYTE_DATA: + TXFIFO_WR(smbus, addr | MTXFIFO_START); + TXFIFO_WR(smbus, command); + if (read_write) { + TXFIFO_WR(smbus, addr | I2C_SMBUS_READ | MTXFIFO_START); + TXFIFO_WR(smbus, 1 | MTXFIFO_READ | MTXFIFO_STOP); + } else { + TXFIFO_WR(smbus, MTXFIFO_STOP | data->byte); + } + break; + case I2C_SMBUS_WORD_DATA: + TXFIFO_WR(smbus, addr | MTXFIFO_START); + TXFIFO_WR(smbus, command); + if (read_write) { + TXFIFO_WR(smbus, addr | I2C_SMBUS_READ | MTXFIFO_START); + TXFIFO_WR(smbus, 2 | MTXFIFO_READ | MTXFIFO_STOP); + } else { + TXFIFO_WR(smbus, data->word & MTXFIFO_DATA_M); + TXFIFO_WR(smbus, MTXFIFO_STOP | (data->word >> 8)); + } + break; + case I2C_SMBUS_BLOCK_DATA: + TXFIFO_WR(smbus, addr | MTXFIFO_START); + TXFIFO_WR(smbus, command); + if (read_write) { + TXFIFO_WR(smbus, addr | I2C_SMBUS_READ | MTXFIFO_START); + TXFIFO_WR(smbus, 1 | MTXFIFO_READ); + rd = RXFIFO_RD(smbus); + len = min_t(u8, (rd & MRXFIFO_DATA_M), + I2C_SMBUS_BLOCK_MAX); + TXFIFO_WR(smbus, (len + 1) | MTXFIFO_READ | + MTXFIFO_STOP); + } else { + len = min_t(u8, data->block[0], I2C_SMBUS_BLOCK_MAX); + TXFIFO_WR(smbus, len); + for (i = 1; i < len; i++) + TXFIFO_WR(smbus, data->block[i]); + TXFIFO_WR(smbus, data->block[len] | MTXFIFO_STOP); + } + break; + case I2C_SMBUS_PROC_CALL: + read_write = I2C_SMBUS_READ; + TXFIFO_WR(smbus, addr | MTXFIFO_START); + TXFIFO_WR(smbus, command); + TXFIFO_WR(smbus, data->word & MTXFIFO_DATA_M); + TXFIFO_WR(smbus, (data->word >> 8) & MTXFIFO_DATA_M); + TXFIFO_WR(smbus, addr | I2C_SMBUS_READ | MTXFIFO_START); + TXFIFO_WR(smbus, 2 | MTXFIFO_STOP | MTXFIFO_READ); + break; + case I2C_SMBUS_BLOCK_PROC_CALL: + len = min_t(u8, data->block[0], I2C_SMBUS_BLOCK_MAX - 1); + read_write = I2C_SMBUS_READ; + TXFIFO_WR(smbus, addr | MTXFIFO_START); + TXFIFO_WR(smbus, command); + TXFIFO_WR(smbus, len); + for (i = 1; i <= len; i++) + TXFIFO_WR(smbus, data->block[i]); + TXFIFO_WR(smbus, addr | I2C_SMBUS_READ); + TXFIFO_WR(smbus, MTXFIFO_READ | 1); + rd = RXFIFO_RD(smbus); + len = min_t(u8, (rd & MRXFIFO_DATA_M), + I2C_SMBUS_BLOCK_MAX - len); + TXFIFO_WR(smbus, (len + 1) | MTXFIFO_READ | MTXFIFO_STOP); + break; + + default: + dev_warn(&adapter->dev, "Unsupported transaction %d\n", size); + return -EINVAL; + } + + err = pasemi_smb_waitready(smbus); + if (err) + goto reset_out; + + if (read_write == I2C_SMBUS_WRITE) + return 0; + + switch (size) { + case I2C_SMBUS_BYTE: + case I2C_SMBUS_BYTE_DATA: + rd = RXFIFO_RD(smbus); + if (rd & MRXFIFO_EMPTY) { + err = -ENODATA; + goto reset_out; + } + data->byte = rd & MRXFIFO_DATA_M; + break; + case I2C_SMBUS_WORD_DATA: + case I2C_SMBUS_PROC_CALL: + rd = RXFIFO_RD(smbus); + if (rd & MRXFIFO_EMPTY) { + err = -ENODATA; + goto reset_out; + } + data->word = rd & MRXFIFO_DATA_M; + rd = RXFIFO_RD(smbus); + if (rd & MRXFIFO_EMPTY) { + err = -ENODATA; + goto reset_out; + } + data->word |= (rd & MRXFIFO_DATA_M) << 8; + break; + case I2C_SMBUS_BLOCK_DATA: + case I2C_SMBUS_BLOCK_PROC_CALL: + data->block[0] = len; + for (i = 1; i <= len; i ++) { + rd = RXFIFO_RD(smbus); + if (rd & MRXFIFO_EMPTY) { + err = -ENODATA; + goto reset_out; + } + data->block[i] = rd & MRXFIFO_DATA_M; + } + break; + } + + return 0; + + reset_out: + reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR | + (CLK_100K_DIV & CTL_CLK_M))); + return err; +} + +static u32 pasemi_smb_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL | + I2C_FUNC_SMBUS_BLOCK_PROC_CALL | I2C_FUNC_I2C; +} + +static const struct i2c_algorithm smbus_algorithm = { + .master_xfer = pasemi_i2c_xfer, + .smbus_xfer = pasemi_smb_xfer, + .functionality = pasemi_smb_func, +}; + +static int __devinit pasemi_smb_probe(struct pci_dev *dev, + const struct pci_device_id *id) +{ + struct pasemi_smbus *smbus; + int error; + + if (!(pci_resource_flags(dev, 0) & IORESOURCE_IO)) + return -ENODEV; + + smbus = kzalloc(sizeof(struct pasemi_smbus), GFP_KERNEL); + if (!smbus) + return -ENOMEM; + + smbus->dev = dev; + smbus->base = pci_resource_start(dev, 0); + smbus->size = pci_resource_len(dev, 0); + + if (!request_region(smbus->base, smbus->size, + pasemi_smb_driver.name)) { + error = -EBUSY; + goto out_kfree; + } + + smbus->adapter.owner = THIS_MODULE; + snprintf(smbus->adapter.name, I2C_NAME_SIZE, + "PA Semi SMBus adapter at 0x%lx", smbus->base); + smbus->adapter.class = I2C_CLASS_HWMON; + smbus->adapter.algo = &smbus_algorithm; + smbus->adapter.algo_data = smbus; + + /* set up the driverfs linkage to our parent device */ + smbus->adapter.dev.parent = &dev->dev; + + reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR | + (CLK_100K_DIV & CTL_CLK_M))); + + error = i2c_add_adapter(&smbus->adapter); + if (error) + goto out_release_region; + + pci_set_drvdata(dev, smbus); + + return 0; + + out_release_region: + release_region(smbus->base, smbus->size); + out_kfree: + kfree(smbus); + return error; +} + +static void __devexit pasemi_smb_remove(struct pci_dev *dev) +{ + struct pasemi_smbus *smbus = pci_get_drvdata(dev); + + i2c_del_adapter(&smbus->adapter); + release_region(smbus->base, smbus->size); + kfree(smbus); +} + +static struct pci_device_id pasemi_smb_ids[] = { + { PCI_DEVICE(0x1959, 0xa003) }, + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, pasemi_smb_ids); + +static struct pci_driver pasemi_smb_driver = { + .name = "i2c-pasemi", + .id_table = pasemi_smb_ids, + .probe = pasemi_smb_probe, + .remove = __devexit_p(pasemi_smb_remove), +}; + +static int __init pasemi_smb_init(void) +{ + return pci_register_driver(&pasemi_smb_driver); +} + +static void __exit pasemi_smb_exit(void) +{ + pci_unregister_driver(&pasemi_smb_driver); +} + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR ("Olof Johansson "); +MODULE_DESCRIPTION("PA Semi PWRficient SMBus driver"); + +module_init(pasemi_smb_init); +module_exit(pasemi_smb_exit); -- cgit v0.10.2 From 12a917f69d1468c91d646dbad8408dd0d39d6207 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 13 Feb 2007 22:09:03 +0100 Subject: i2c: Declare more i2c_adapter parent devices Declare the parent device of i2c_adapter devices each time we can easily do so. It makes the i2c_adapter appear at the right place in the device tree, rather than as a platform device. Signed-off-by: Jean Delvare Cc: David Brownell Cc: Len Brown Cc: Jordan Crouse Cc: Jody McIntyre Cc: Stefan Richter Cc: v4l-dvb-maintainer@linuxtv.org Cc: Petr Vandrovec diff --git a/drivers/acpi/i2c_ec.c b/drivers/acpi/i2c_ec.c index 8338be0..bb54b6c 100644 --- a/drivers/acpi/i2c_ec.c +++ b/drivers/acpi/i2c_ec.c @@ -340,6 +340,7 @@ static int acpi_ec_hc_add(struct acpi_device *device) smbus->adapter.owner = THIS_MODULE; smbus->adapter.algo = &acpi_ec_smbus_algorithm; smbus->adapter.algo_data = smbus; + smbus->adapter.dev.parent = &device->dev; if (i2c_add_adapter(&smbus->adapter)) { ACPI_DEBUG_PRINT((ACPI_DB_WARN, diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c index 08e9157..e5e96c8 100644 --- a/drivers/i2c/busses/i2c-amd756-s4882.c +++ b/drivers/i2c/busses/i2c-amd756-s4882.c @@ -184,12 +184,14 @@ static int __init amd756_s4882_init(void) s4882_algo[0].smbus_xfer = amd756_access_virt0; s4882_adapter[0] = amd756_smbus; s4882_adapter[0].algo = s4882_algo; + s4882_adapter[0].dev.parent = amd756_smbus.dev.parent; for (i = 1; i < 5; i++) { s4882_algo[i] = *(amd756_smbus.algo); s4882_adapter[i] = amd756_smbus; sprintf(s4882_adapter[i].name, "SMBus 8111 adapter (CPU%d)", i-1); s4882_adapter[i].algo = s4882_algo+i; + s4882_adapter[i].dev.parent = amd756_smbus.dev.parent; } s4882_algo[1].smbus_xfer = amd756_access_virt1; s4882_algo[2].smbus_xfer = amd756_access_virt2; diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index 1898e99..8b14d14 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -727,6 +727,7 @@ static int __devinit iic_probe(struct ocp_device *ocp){ /* Register it with i2c layer */ adap = &dev->adap; + adap->dev.parent = &ocp->dev; strcpy(adap->name, "IBM IIC"); i2c_set_adapdata(adap, dev); adap->id = I2C_HW_OCP; diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 4901736..a3283b9 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -520,6 +520,7 @@ mv64xxx_i2c_probe(struct platform_device *pd) rc = -ENXIO; goto exit_unmap_regs; } + drv_data->adapter.dev.parent = &pd->dev; drv_data->adapter.id = I2C_HW_MV64XXX; drv_data->adapter.algo = &mv64xxx_i2c_algo; drv_data->adapter.owner = THIS_MODULE; diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c index 714bae7..0b082c5 100644 --- a/drivers/i2c/busses/scx200_acb.c +++ b/drivers/i2c/busses/scx200_acb.c @@ -428,7 +428,7 @@ static __init int scx200_acb_probe(struct scx200_acb_iface *iface) } static __init struct scx200_acb_iface *scx200_create_iface(const char *text, - int index) + struct device *dev, int index) { struct scx200_acb_iface *iface; struct i2c_adapter *adapter; @@ -446,6 +446,7 @@ static __init struct scx200_acb_iface *scx200_create_iface(const char *text, adapter->id = I2C_HW_SMBUS_SCX200; adapter->algo = &scx200_acb_algorithm; adapter->class = I2C_CLASS_HWMON; + adapter->dev.parent = dev; mutex_init(&iface->mutex); @@ -486,7 +487,7 @@ static __init int scx200_create_pci(const char *text, struct pci_dev *pdev, struct scx200_acb_iface *iface; int rc; - iface = scx200_create_iface(text, 0); + iface = scx200_create_iface(text, &pdev->dev, 0); if (iface == NULL) return -ENOMEM; @@ -524,7 +525,7 @@ static int __init scx200_create_isa(const char *text, unsigned long base, struct scx200_acb_iface *iface; int rc; - iface = scx200_create_iface(text, index); + iface = scx200_create_iface(text, NULL, index); if (iface == NULL) return -ENOMEM; diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c index fbb7f14..0742bef 100644 --- a/drivers/ieee1394/pcilynx.c +++ b/drivers/ieee1394/pcilynx.c @@ -1434,6 +1434,7 @@ static int __devinit add_card(struct pci_dev *dev, i2c_adapter_data = bit_data; i2c_ad->algo_data = &i2c_adapter_data; i2c_adapter_data.data = lynx; + i2c_ad->dev.parent = &dev->dev; PRINTD(KERN_DEBUG, lynx->id,"original eeprom control: %d", reg_read(lynx, SERIAL_EEPROM_CONTROL)); diff --git a/drivers/media/dvb/b2c2/flexcop-i2c.c b/drivers/media/dvb/b2c2/flexcop-i2c.c index e0bd2d8..5347a40 100644 --- a/drivers/media/dvb/b2c2/flexcop-i2c.c +++ b/drivers/media/dvb/b2c2/flexcop-i2c.c @@ -190,6 +190,7 @@ int flexcop_i2c_init(struct flexcop_device *fc) fc->i2c_adap.class = I2C_CLASS_TV_DIGITAL; fc->i2c_adap.algo = &flexcop_algo; fc->i2c_adap.algo_data = NULL; + fc->i2c_adap.dev.parent = fc->dev; if ((ret = i2c_add_adapter(&fc->i2c_adap)) < 0) return ret; diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c b/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c index 55ba020..70df31b 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c +++ b/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c @@ -27,6 +27,7 @@ int dvb_usb_i2c_init(struct dvb_usb_device *d) #endif d->i2c_adap.algo = d->props.i2c_algo; d->i2c_adap.algo_data = NULL; + d->i2c_adap.dev.parent = &d->udev->dev; i2c_set_adapdata(&d->i2c_adap, d); diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c index 60820de..b60cdc9 100644 --- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c +++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c @@ -1690,6 +1690,7 @@ static int ttusb_probe(struct usb_interface *intf, const struct usb_device_id *i #endif ttusb->i2c_adap.algo = &ttusb_dec_algo; ttusb->i2c_adap.algo_data = NULL; + ttusb->i2c_adap.dev.parent = &udev->dev; result = i2c_add_adapter(&ttusb->i2c_adap); if (result) { diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c index fb1410c..4dae892 100644 --- a/drivers/media/video/cafe_ccic.c +++ b/drivers/media/video/cafe_ccic.c @@ -549,6 +549,7 @@ static int cafe_smbus_setup(struct cafe_camera *cam) adap->client_unregister = cafe_smbus_detach; adap->algo = &cafe_smbus_algo; strcpy(adap->name, "cafe_ccic"); + adap->dev.parent = &cam->pdev->dev; i2c_set_adapdata(adap, cam); ret = i2c_add_adapter(adap); if (ret) diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c index f9bb41d..62a7cfc 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c +++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c @@ -977,6 +977,7 @@ void pvr2_i2c_core_init(struct pvr2_hdw *hdw) memcpy(&hdw->i2c_adap,&pvr2_i2c_adap_template,sizeof(hdw->i2c_adap)); memcpy(&hdw->i2c_algo,&pvr2_i2c_algo_template,sizeof(hdw->i2c_algo)); strlcpy(hdw->i2c_adap.name,hdw->name,sizeof(hdw->i2c_adap.name)); + hdw->i2c_adap.dev.parent = &hdw->usb_dev->dev; hdw->i2c_adap.algo = &hdw->i2c_algo; hdw->i2c_adap.algo_data = hdw; hdw->i2c_pend_mask = 0; diff --git a/drivers/media/video/usbvision/usbvision-i2c.c b/drivers/media/video/usbvision/usbvision-i2c.c index 858252c..a242b76 100644 --- a/drivers/media/video/usbvision/usbvision-i2c.c +++ b/drivers/media/video/usbvision/usbvision-i2c.c @@ -258,6 +258,7 @@ int usbvision_init_i2c(struct usb_usbvision *usbvision) sprintf(usbvision->i2c_adap.name + strlen(usbvision->i2c_adap.name), " #%d", usbvision->vdev->minor & 0x1f); PDEBUG(DBG_I2C,"Adaptername: %s", usbvision->i2c_adap.name); + usbvision->i2c_adap.dev.parent = &usbvision->dev->dev; i2c_set_adapdata(&usbvision->i2c_adap, usbvision); i2c_set_clientdata(&usbvision->i2c_client, usbvision); diff --git a/drivers/media/video/w9968cf.c b/drivers/media/video/w9968cf.c index 6e64af2..8f31613 100644 --- a/drivers/media/video/w9968cf.c +++ b/drivers/media/video/w9968cf.c @@ -1573,6 +1573,7 @@ static int w9968cf_i2c_init(struct w9968cf_device* cam) memcpy(&cam->i2c_adapter, &adap, sizeof(struct i2c_adapter)); strcpy(cam->i2c_adapter.name, "w9968cf"); + cam->i2c_adapter.dev.parent = &cam->usbdev->dev; i2c_set_adapdata(&cam->i2c_adapter, cam); DBG(6, "Registering I2C adapter with kernel...") diff --git a/drivers/media/video/zoran_card.c b/drivers/media/video/zoran_card.c index 4d1eb2f..73162a3 100644 --- a/drivers/media/video/zoran_card.c +++ b/drivers/media/video/zoran_card.c @@ -843,6 +843,7 @@ zoran_register_i2c (struct zoran *zr) sizeof(I2C_NAME(&zr->i2c_adapter)) - 1); i2c_set_adapdata(&zr->i2c_adapter, zr); zr->i2c_adapter.algo_data = &zr->i2c_algo; + zr->i2c_adapter.dev.parent = &zr->pci_dev->dev; return i2c_bit_add_bus(&zr->i2c_adapter); } diff --git a/drivers/video/matrox/i2c-matroxfb.c b/drivers/video/matrox/i2c-matroxfb.c index f64c4a0..5ec718a 100644 --- a/drivers/video/matrox/i2c-matroxfb.c +++ b/drivers/video/matrox/i2c-matroxfb.c @@ -115,6 +115,7 @@ static int i2c_bus_reg(struct i2c_bit_adapter* b, struct matrox_fb_info* minfo, minfo->fbcon.node); i2c_set_adapdata(&b->adapter, b); b->adapter.algo_data = &b->bac; + b->adapter.dev.parent = &ACCESS_FBINFO(pcidev)->dev; b->bac = matrox_i2c_algo_template; b->bac.data = b; err = i2c_bit_add_bus(&b->adapter); -- cgit v0.10.2 From fe2c8d51af96ef7b8ec0bfd70ec62bbe32c0696e Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 13 Feb 2007 22:09:04 +0100 Subject: i2c: Remove the warning on missing adapter device Now that the i2c_adapter migration plan changed and we are going to keep i2c_adapter.dev, it's no longer that urgent to add a proper device to all i2c_adapter drivers. Thus is seems resonable to degrade the warning asking authors to migrate their driver to a debug message. Signed-off-by: Jean Delvare diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 9653f7f..21fe140 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -217,9 +217,8 @@ int i2c_add_adapter(struct i2c_adapter *adap) */ if (adap->dev.parent == NULL) { adap->dev.parent = &platform_bus; - printk(KERN_WARNING "**WARNING** I2C adapter driver [%s] " - "forgot to specify physical device; fix it!\n", - adap->name); + pr_debug("I2C adapter driver [%s] forgot to specify " + "physical device\n", adap->name); } sprintf(adap->dev.bus_id, "i2c-%d", adap->nr); adap->dev.driver = &i2c_adapter_driver; -- cgit v0.10.2 From 5dd3ffae0afe355738eca14da1b47284bdae6240 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 13 Feb 2007 22:09:04 +0100 Subject: i2c: Stop using i2c_adapter.class_dev Stop using i2c_adapter.class_dev, as it is going to be removed soon. Luckily, there are only 4 RTC drivers affected. Signed-off-by: Jean Delvare Cc: Alessandro Zummo diff --git a/drivers/rtc/rtc-ds1672.c b/drivers/rtc/rtc-ds1672.c index 205fa28..dfef163 100644 --- a/drivers/rtc/rtc-ds1672.c +++ b/drivers/rtc/rtc-ds1672.c @@ -199,7 +199,7 @@ static int ds1672_probe(struct i2c_adapter *adapter, int address, int kind) struct i2c_client *client; struct rtc_device *rtc; - dev_dbg(adapter->class_dev.dev, "%s\n", __FUNCTION__); + dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { err = -ENODEV; diff --git a/drivers/rtc/rtc-pcf8563.c b/drivers/rtc/rtc-pcf8563.c index 038118b..0242d80 100644 --- a/drivers/rtc/rtc-pcf8563.c +++ b/drivers/rtc/rtc-pcf8563.c @@ -279,7 +279,7 @@ static int pcf8563_probe(struct i2c_adapter *adapter, int address, int kind) int err = 0; - dev_dbg(adapter->class_dev.dev, "%s\n", __FUNCTION__); + dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { err = -ENODEV; diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c index e7851e3..09bbe57 100644 --- a/drivers/rtc/rtc-rs5c372.c +++ b/drivers/rtc/rtc-rs5c372.c @@ -499,7 +499,7 @@ static int rs5c372_probe(struct i2c_adapter *adapter, int address, int kind) struct rs5c372 *rs5c372; struct rtc_time tm; - dev_dbg(adapter->class_dev.dev, "%s\n", __FUNCTION__); + dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { err = -ENODEV; diff --git a/drivers/rtc/rtc-x1205.c b/drivers/rtc/rtc-x1205.c index 019ae25..513d1a6 100644 --- a/drivers/rtc/rtc-x1205.c +++ b/drivers/rtc/rtc-x1205.c @@ -506,7 +506,7 @@ static int x1205_probe(struct i2c_adapter *adapter, int address, int kind) struct i2c_client *client; struct rtc_device *rtc; - dev_dbg(adapter->class_dev.dev, "%s\n", __FUNCTION__); + dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { err = -ENODEV; -- cgit v0.10.2 From 02ed82ccc5171bc3c88666568edcb71f3d4a79f6 Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Tue, 13 Feb 2007 16:00:49 -0600 Subject: [POWERPC] 85xx: Drop use of SYNC macro in head_fsl_booke.S Eliminate needless invocation of the SYNC macro (which always evaluates to nothing on BookE) from head_fsl_booke.S (for both arch/ppc & arch/powerpc). Signed-off-by: Becky Bruce Signed-off-by: Kumar Gala diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 54f40d9..1f155d3 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -892,7 +892,6 @@ load_up_spe: REST_GPR(9, r11) REST_GPR(12, r11) lwz r11,GPR11(r11) - SYNC rfi /* @@ -956,7 +955,6 @@ _GLOBAL(giveup_altivec) _GLOBAL(giveup_spe) mfmsr r5 oris r5,r5,MSR_SPE@h - SYNC mtmsr r5 /* enable use of SPE now */ isync cmpi 0,r3,0 diff --git a/arch/ppc/kernel/head_fsl_booke.S b/arch/ppc/kernel/head_fsl_booke.S index 54f40d9..1f155d3 100644 --- a/arch/ppc/kernel/head_fsl_booke.S +++ b/arch/ppc/kernel/head_fsl_booke.S @@ -892,7 +892,6 @@ load_up_spe: REST_GPR(9, r11) REST_GPR(12, r11) lwz r11,GPR11(r11) - SYNC rfi /* @@ -956,7 +955,6 @@ _GLOBAL(giveup_altivec) _GLOBAL(giveup_spe) mfmsr r5 oris r5,r5,MSR_SPE@h - SYNC mtmsr r5 /* enable use of SPE now */ isync cmpi 0,r3,0 -- cgit v0.10.2 From f65e4fa8e0c6022ad58dc88d1b11b12589ed7f9f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 28 Sep 2006 01:45:21 +0100 Subject: [MIPS] Improve branch prediction in ll/sc atomic operations. Now that finally all supported versions of binutils have functioning support for .subsection use .subsection to tweak the branch prediction I did not modify the R10000 errata variants because it seems unclear if this will invalidate the workaround which actually relies on the cheesy prediction of branch likely to cause a misspredict if the sc was successful. Signed-off-by: Ralf Baechle diff --git a/include/asm-mips/atomic.h b/include/asm-mips/atomic.h index c1a2409..8578869 100644 --- a/include/asm-mips/atomic.h +++ b/include/asm-mips/atomic.h @@ -69,7 +69,10 @@ static __inline__ void atomic_add(int i, atomic_t * v) "1: ll %0, %1 # atomic_add \n" " addu %0, %2 \n" " sc %0, %1 \n" - " beqz %0, 1b \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" " .set mips0 \n" : "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter)); @@ -111,7 +114,10 @@ static __inline__ void atomic_sub(int i, atomic_t * v) "1: ll %0, %1 # atomic_sub \n" " subu %0, %2 \n" " sc %0, %1 \n" - " beqz %0, 1b \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" " .set mips0 \n" : "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter)); @@ -155,8 +161,11 @@ static __inline__ int atomic_add_return(int i, atomic_t * v) "1: ll %1, %2 # atomic_add_return \n" " addu %0, %1, %3 \n" " sc %0, %2 \n" - " beqz %0, 1b \n" + " beqz %0, 2f \n" " addu %0, %1, %3 \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" " .set mips0 \n" : "=&r" (result), "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter) @@ -204,8 +213,11 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v) "1: ll %1, %2 # atomic_sub_return \n" " subu %0, %1, %3 \n" " sc %0, %2 \n" - " beqz %0, 1b \n" + " beqz %0, 2f \n" " subu %0, %1, %3 \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" " .set mips0 \n" : "=&r" (result), "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter) @@ -267,10 +279,13 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v) " bltz %0, 1f \n" " sc %0, %2 \n" " .set noreorder \n" - " beqz %0, 1b \n" + " beqz %0, 2f \n" " subu %0, %1, %3 \n" " .set reorder \n" "1: \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" " .set mips0 \n" : "=&r" (result), "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter) @@ -429,7 +444,10 @@ static __inline__ void atomic64_add(long i, atomic64_t * v) "1: lld %0, %1 # atomic64_add \n" " addu %0, %2 \n" " scd %0, %1 \n" - " beqz %0, 1b \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" " .set mips0 \n" : "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter)); @@ -471,7 +489,10 @@ static __inline__ void atomic64_sub(long i, atomic64_t * v) "1: lld %0, %1 # atomic64_sub \n" " subu %0, %2 \n" " scd %0, %1 \n" - " beqz %0, 1b \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" " .set mips0 \n" : "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter)); @@ -515,8 +536,11 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v) "1: lld %1, %2 # atomic64_add_return \n" " addu %0, %1, %3 \n" " scd %0, %2 \n" - " beqz %0, 1b \n" + " beqz %0, 2f \n" " addu %0, %1, %3 \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" " .set mips0 \n" : "=&r" (result), "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter) @@ -564,8 +588,11 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v) "1: lld %1, %2 # atomic64_sub_return \n" " subu %0, %1, %3 \n" " scd %0, %2 \n" - " beqz %0, 1b \n" + " beqz %0, 2f \n" " subu %0, %1, %3 \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" " .set mips0 \n" : "=&r" (result), "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter) @@ -627,10 +654,13 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v) " bltz %0, 1f \n" " scd %0, %2 \n" " .set noreorder \n" - " beqz %0, 1b \n" + " beqz %0, 2f \n" " dsubu %0, %1, %3 \n" " .set reorder \n" "1: \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" " .set mips0 \n" : "=&r" (result), "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter) diff --git a/include/asm-mips/bitops.h b/include/asm-mips/bitops.h index 06445de..06c0822 100644 --- a/include/asm-mips/bitops.h +++ b/include/asm-mips/bitops.h @@ -68,7 +68,10 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr) "1: " __LL "%0, %1 # set_bit \n" " or %0, %2 \n" " " __SC "%0, %1 \n" - " beqz %0, 1b \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" " .set mips0 \n" : "=&r" (temp), "=m" (*m) : "ir" (1UL << (nr & SZLONG_MASK)), "m" (*m)); @@ -116,7 +119,10 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr) "1: " __LL "%0, %1 # clear_bit \n" " and %0, %2 \n" " " __SC "%0, %1 \n" - " beqz %0, 1b \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" " .set mips0 \n" : "=&r" (temp), "=m" (*m) : "ir" (~(1UL << (nr & SZLONG_MASK))), "m" (*m)); @@ -166,7 +172,10 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *addr) "1: " __LL "%0, %1 # change_bit \n" " xor %0, %2 \n" " " __SC "%0, %1 \n" - " beqz %0, 1b \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" " .set mips0 \n" : "=&r" (temp), "=m" (*m) : "ir" (1UL << (nr & SZLONG_MASK)), "m" (*m)); @@ -222,8 +231,12 @@ static inline int test_and_set_bit(unsigned long nr, "1: " __LL "%0, %1 # test_and_set_bit \n" " or %2, %0, %3 \n" " " __SC "%2, %1 \n" - " beqz %2, 1b \n" + " beqz %2, 2f \n" " and %2, %0, %3 \n" + " .subsection 2 \n" + "2: b 1b \n" + " nop \n" + " .previous \n" " .set pop \n" : "=&r" (temp), "=m" (*m), "=&r" (res) : "r" (1UL << (nr & SZLONG_MASK)), "m" (*m) @@ -290,8 +303,12 @@ static inline int test_and_clear_bit(unsigned long nr, " or %2, %0, %3 \n" " xor %2, %3 \n" " " __SC "%2, %1 \n" - " beqz %2, 1b \n" + " beqz %2, 2f \n" " and %2, %0, %3 \n" + " .subsection 2 \n" + "2: b 1b \n" + " nop \n" + " .previous \n" " .set pop \n" : "=&r" (temp), "=m" (*m), "=&r" (res) : "r" (1UL << (nr & SZLONG_MASK)), "m" (*m) @@ -356,8 +373,12 @@ static inline int test_and_change_bit(unsigned long nr, "1: " __LL "%0, %1 # test_and_change_bit \n" " xor %2, %0, %3 \n" " " __SC "\t%2, %1 \n" - " beqz %2, 1b \n" + " beqz %2, 2f \n" " and %2, %0, %3 \n" + " .subsection 2 \n" + "2: b 1b \n" + " nop \n" + " .previous \n" " .set pop \n" : "=&r" (temp), "=m" (*m), "=&r" (res) : "r" (1UL << (nr & SZLONG_MASK)), "m" (*m) diff --git a/include/asm-mips/spinlock.h b/include/asm-mips/spinlock.h index fc3217f..f1755d2 100644 --- a/include/asm-mips/spinlock.h +++ b/include/asm-mips/spinlock.h @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 1999, 2000, 06 by Ralf Baechle + * Copyright (C) 1999, 2000, 06 Ralf Baechle (ralf@linux-mips.org) * Copyright (C) 1999, 2000 Silicon Graphics, Inc. */ #ifndef _ASM_SPINLOCK_H @@ -49,11 +49,18 @@ static inline void __raw_spin_lock(raw_spinlock_t *lock) __asm__ __volatile__( " .set noreorder # __raw_spin_lock \n" "1: ll %1, %2 \n" - " bnez %1, 1b \n" + " bnez %1, 2f \n" " li %1, 1 \n" " sc %1, %0 \n" - " beqz %1, 1b \n" + " beqz %1, 2f \n" " nop \n" + " .subsection 2 \n" + "2: ll %1, %2 \n" + " bnez %1, 2b \n" + " li %1, 1 \n" + " b 1b \n" + " nop \n" + " .previous \n" " .set reorder \n" : "=m" (lock->lock), "=&r" (tmp) : "m" (lock->lock) @@ -99,8 +106,12 @@ static inline unsigned int __raw_spin_trylock(raw_spinlock_t *lock) "1: ll %0, %3 \n" " ori %2, %0, 1 \n" " sc %2, %1 \n" - " beqz %2, 1b \n" + " beqz %2, 2f \n" " andi %2, %0, 1 \n" + " .subsection 2 \n" + "2: b 1b \n" + " nop \n" + " .previous \n" " .set reorder" : "=&r" (temp), "=m" (lock->lock), "=&r" (res) : "m" (lock->lock) @@ -154,11 +165,18 @@ static inline void __raw_read_lock(raw_rwlock_t *rw) __asm__ __volatile__( " .set noreorder # __raw_read_lock \n" "1: ll %1, %2 \n" - " bltz %1, 1b \n" + " bltz %1, 2f \n" " addu %1, 1 \n" " sc %1, %0 \n" " beqz %1, 1b \n" " nop \n" + " .subsection 2 \n" + "2: ll %1, %2 \n" + " bltz %1, 2b \n" + " addu %1, 1 \n" + " b 1b \n" + " nop \n" + " .previous \n" " .set reorder \n" : "=m" (rw->lock), "=&r" (tmp) : "m" (rw->lock) @@ -192,8 +210,12 @@ static inline void __raw_read_unlock(raw_rwlock_t *rw) "1: ll %1, %2 \n" " sub %1, 1 \n" " sc %1, %0 \n" - " beqz %1, 1b \n" + " beqz %1, 2f \n" + " nop \n" + " .subsection 2 \n" + "2: b 1b \n" " nop \n" + " .previous \n" " .set reorder \n" : "=m" (rw->lock), "=&r" (tmp) : "m" (rw->lock) @@ -222,11 +244,18 @@ static inline void __raw_write_lock(raw_rwlock_t *rw) __asm__ __volatile__( " .set noreorder # __raw_write_lock \n" "1: ll %1, %2 \n" - " bnez %1, 1b \n" + " bnez %1, 2f \n" " lui %1, 0x8000 \n" " sc %1, %0 \n" - " beqz %1, 1b \n" + " beqz %1, 2f \n" + " nop \n" + " .subsection 2 \n" + "2: ll %1, %2 \n" + " bnez %1, 2b \n" + " lui %1, 0x8000 \n" + " b 1b \n" " nop \n" + " .previous \n" " .set reorder \n" : "=m" (rw->lock), "=&r" (tmp) : "m" (rw->lock) @@ -322,12 +351,15 @@ static inline int __raw_write_trylock(raw_rwlock_t *rw) " bnez %1, 2f \n" " lui %1, 0x8000 \n" " sc %1, %0 \n" - " beqz %1, 1b \n" - " nop \n" + " beqz %1, 3f \n" + " li %2, 1 \n" + "2: \n" __WEAK_ORDERING_MB - " li %2, 1 \n" + " .subsection 2 \n" + "3: b 1b \n" + " li %2, 0 \n" + " .previous \n" " .set reorder \n" - "2: \n" : "=m" (rw->lock), "=&r" (tmp), "=&r" (ret) : "m" (rw->lock) : "memory"); diff --git a/include/asm-mips/system.h b/include/asm-mips/system.h index 5e1289c..597a374 100644 --- a/include/asm-mips/system.h +++ b/include/asm-mips/system.h @@ -110,7 +110,10 @@ static inline unsigned long __xchg_u32(volatile int * m, unsigned int val) " move %2, %z4 \n" " .set mips3 \n" " sc %2, %1 \n" - " beqz %2, 1b \n" + " beqz %2, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" " .set mips0 \n" : "=&r" (retval), "=m" (*m), "=&r" (dummy) : "R" (*m), "Jr" (val) @@ -155,7 +158,10 @@ static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val) "1: lld %0, %3 # xchg_u64 \n" " move %2, %z4 \n" " scd %2, %1 \n" - " beqz %2, 1b \n" + " beqz %2, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" " .set mips0 \n" : "=&r" (retval), "=m" (*m), "=&r" (dummy) : "R" (*m), "Jr" (val) @@ -232,8 +238,11 @@ static inline unsigned long __cmpxchg_u32(volatile int * m, unsigned long old, " move $1, %z4 \n" " .set mips3 \n" " sc $1, %1 \n" - " beqz $1, 1b \n" + " beqz $1, 3f \n" "2: \n" + " .subsection 2 \n" + "3: b 1b \n" + " .previous \n" " .set pop \n" : "=&r" (retval), "=R" (*m) : "R" (*m), "Jr" (old), "Jr" (new) @@ -283,8 +292,11 @@ static inline unsigned long __cmpxchg_u64(volatile int * m, unsigned long old, " bne %0, %z3, 2f \n" " move $1, %z4 \n" " scd $1, %1 \n" - " beqz $1, 1b \n" + " beqz $1, 3f \n" "2: \n" + " .subsection 2 \n" + "3: b 1b \n" + " .previous \n" " .set pop \n" : "=&r" (retval), "=R" (*m) : "R" (*m), "Jr" (old), "Jr" (new) -- cgit v0.10.2 From 9a88cbb5227970757881b1a65be01dea61fe2584 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 16 Nov 2006 02:56:12 +0000 Subject: [MIPS] Unify dma-{coherent,noncoherent.ip27,ip32} Platforms will now have to supply a function dma_device_is_coherent which returns if a particular device participates in the coherence domain. For most platforms this function will always return 0 or 1. Signed-off-by: Ralf Baechle diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 5fe195a..a92ce6b 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -598,8 +598,6 @@ config SGI_IP32 select ARC select ARC32 select BOOT_ELF32 - select OWN_DMA - select DMA_IP32 select DMA_NONCOHERENT select HW_HAS_PCI select R5000_CPU_SCACHE @@ -883,9 +881,6 @@ config DMA_NONCOHERENT config DMA_NEED_PCI_MAP_STATE bool -config OWN_DMA - bool - config EARLY_PRINTK bool diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile index 19e41fd..de57273 100644 --- a/arch/mips/mm/Makefile +++ b/arch/mips/mm/Makefile @@ -2,8 +2,8 @@ # Makefile for the Linux/MIPS-specific parts of the memory manager. # -obj-y += cache.o extable.o fault.o init.o pgtable.o \ - tlbex.o tlbex-fault.o +obj-y += cache.o dma-default.o extable.o fault.o \ + init.o pgtable.o tlbex.o tlbex-fault.o obj-$(CONFIG_32BIT) += ioremap.o pgtable-32.o obj-$(CONFIG_64BIT) += pgtable-64.o @@ -32,14 +32,4 @@ obj-$(CONFIG_R5000_CPU_SCACHE) += sc-r5k.o obj-$(CONFIG_RM7000_CPU_SCACHE) += sc-rm7k.o obj-$(CONFIG_MIPS_CPU_SCACHE) += sc-mips.o -# -# Choose one DMA coherency model -# -ifndef CONFIG_OWN_DMA -obj-$(CONFIG_DMA_COHERENT) += dma-coherent.o -obj-$(CONFIG_DMA_NONCOHERENT) += dma-noncoherent.o -endif -obj-$(CONFIG_DMA_IP27) += dma-ip27.o -obj-$(CONFIG_DMA_IP32) += dma-ip32.o - EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/mm/dma-coherent.c b/arch/mips/mm/dma-coherent.c deleted file mode 100644 index 5697c6e..0000000 --- a/arch/mips/mm/dma-coherent.c +++ /dev/null @@ -1,254 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000 Ani Joshi - * Copyright (C) 2000, 2001 Ralf Baechle - * swiped from i386, and cloned for MIPS by Geert, polished by Ralf. - */ -#include -#include -#include -#include -#include - -#include -#include - -void *dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) -{ - void *ret; - /* ignore region specifiers */ - gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); - - if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff)) - gfp |= GFP_DMA; - ret = (void *) __get_free_pages(gfp, get_order(size)); - - if (ret != NULL) { - memset(ret, 0, size); - *dma_handle = virt_to_phys(ret); - } - - return ret; -} - -EXPORT_SYMBOL(dma_alloc_noncoherent); - -void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) - __attribute__((alias("dma_alloc_noncoherent"))); - -EXPORT_SYMBOL(dma_alloc_coherent); - -void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) -{ - unsigned long addr = (unsigned long) vaddr; - - free_pages(addr, get_order(size)); -} - -EXPORT_SYMBOL(dma_free_noncoherent); - -void dma_free_coherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) __attribute__((alias("dma_free_noncoherent"))); - -EXPORT_SYMBOL(dma_free_coherent); - -dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - return __pa(ptr); -} - -EXPORT_SYMBOL(dma_map_single); - -void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_unmap_single); - -int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction direction) -{ - int i; - - BUG_ON(direction == DMA_NONE); - - for (i = 0; i < nents; i++, sg++) { - sg->dma_address = (dma_addr_t)page_to_phys(sg->page) + sg->offset; - } - - return nents; -} - -EXPORT_SYMBOL(dma_map_sg); - -dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - return page_to_phys(page) + offset; -} - -EXPORT_SYMBOL(dma_map_page); - -void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_unmap_page); - -void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_unmap_sg); - -void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_for_cpu); - -void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_for_device); - -void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_range_for_cpu); - -void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_range_for_device); - -void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_sg_for_cpu); - -void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_sg_for_device); - -int dma_mapping_error(dma_addr_t dma_addr) -{ - return 0; -} - -EXPORT_SYMBOL(dma_mapping_error); - -int dma_supported(struct device *dev, u64 mask) -{ - /* - * we fall back to GFP_DMA when the mask isn't all 1s, - * so we can't guarantee allocations that must be - * within a tighter range than GFP_DMA.. - */ - if (mask < 0x00ffffff) - return 0; - - return 1; -} - -EXPORT_SYMBOL(dma_supported); - -int dma_is_consistent(struct device *dev, dma_addr_t dma_addr) -{ - return 1; -} - -EXPORT_SYMBOL(dma_is_consistent); - -void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_cache_sync); - -/* The DAC routines are a PCIism.. */ - -#ifdef CONFIG_PCI - -#include - -dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev, - struct page *page, unsigned long offset, int direction) -{ - return (dma64_addr_t)page_to_phys(page) + offset; -} - -EXPORT_SYMBOL(pci_dac_page_to_dma); - -struct page *pci_dac_dma_to_page(struct pci_dev *pdev, - dma64_addr_t dma_addr) -{ - return mem_map + (dma_addr >> PAGE_SHIFT); -} - -EXPORT_SYMBOL(pci_dac_dma_to_page); - -unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev, - dma64_addr_t dma_addr) -{ - return dma_addr & ~PAGE_MASK; -} - -EXPORT_SYMBOL(pci_dac_dma_to_offset); - -void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, - dma64_addr_t dma_addr, size_t len, int direction) -{ - BUG_ON(direction == PCI_DMA_NONE); -} - -EXPORT_SYMBOL(pci_dac_dma_sync_single_for_cpu); - -void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, - dma64_addr_t dma_addr, size_t len, int direction) -{ - BUG_ON(direction == PCI_DMA_NONE); -} - -EXPORT_SYMBOL(pci_dac_dma_sync_single_for_device); - -#endif /* CONFIG_PCI */ diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c new file mode 100644 index 0000000..4a32e93 --- /dev/null +++ b/arch/mips/mm/dma-default.c @@ -0,0 +1,363 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000 Ani Joshi + * Copyright (C) 2000, 2001, 06 Ralf Baechle + * swiped from i386, and cloned for MIPS by Geert, polished by Ralf. + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include + +/* + * Warning on the terminology - Linux calls an uncached area coherent; + * MIPS terminology calls memory areas with hardware maintained coherency + * coherent. + */ + +static inline int cpu_is_noncoherent_r10000(struct device *dev) +{ + return !plat_device_is_coherent(dev) && + (current_cpu_data.cputype == CPU_R10000 && + current_cpu_data.cputype == CPU_R12000); +} + +void *dma_alloc_noncoherent(struct device *dev, size_t size, + dma_addr_t * dma_handle, gfp_t gfp) +{ + void *ret; + + /* ignore region specifiers */ + gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); + + if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff)) + gfp |= GFP_DMA; + ret = (void *) __get_free_pages(gfp, get_order(size)); + + if (ret != NULL) { + memset(ret, 0, size); + *dma_handle = plat_map_dma_mem(dev, ret, size); + } + + return ret; +} + +EXPORT_SYMBOL(dma_alloc_noncoherent); + +void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t * dma_handle, gfp_t gfp) +{ + void *ret; + + /* ignore region specifiers */ + gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); + + if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff)) + gfp |= GFP_DMA; + ret = (void *) __get_free_pages(gfp, get_order(size)); + + if (ret) { + memset(ret, 0, size); + *dma_handle = plat_map_dma_mem(dev, ret, size); + + if (!plat_device_is_coherent(dev)) { + dma_cache_wback_inv((unsigned long) ret, size); + ret = UNCAC_ADDR(ret); + } + } + + return ret; +} + +EXPORT_SYMBOL(dma_alloc_coherent); + +void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr, + dma_addr_t dma_handle) +{ + free_pages((unsigned long) vaddr, get_order(size)); +} + +EXPORT_SYMBOL(dma_free_noncoherent); + +void dma_free_coherent(struct device *dev, size_t size, void *vaddr, + dma_addr_t dma_handle) +{ + unsigned long addr = (unsigned long) vaddr; + + if (!plat_device_is_coherent(dev)) + addr = CAC_ADDR(addr); + + free_pages(addr, get_order(size)); +} + +EXPORT_SYMBOL(dma_free_coherent); + +static inline void __dma_sync(unsigned long addr, size_t size, + enum dma_data_direction direction) +{ + switch (direction) { + case DMA_TO_DEVICE: + dma_cache_wback(addr, size); + break; + + case DMA_FROM_DEVICE: + dma_cache_inv(addr, size); + break; + + case DMA_BIDIRECTIONAL: + dma_cache_wback_inv(addr, size); + break; + + default: + BUG(); + } +} + +dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, + enum dma_data_direction direction) +{ + unsigned long addr = (unsigned long) ptr; + + if (!plat_device_is_coherent(dev)) + __dma_sync(addr, size, direction); + + return plat_map_dma_mem(dev, ptr, size); +} + +EXPORT_SYMBOL(dma_map_single); + +void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, + enum dma_data_direction direction) +{ + if (cpu_is_noncoherent_r10000(dev)) + __dma_sync(plat_dma_addr_to_phys(dma_addr) + PAGE_OFFSET, size, + direction); + + plat_unmap_dma_mem(dma_addr); +} + +EXPORT_SYMBOL(dma_unmap_single); + +int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction direction) +{ + int i; + + BUG_ON(direction == DMA_NONE); + + for (i = 0; i < nents; i++, sg++) { + unsigned long addr; + + addr = (unsigned long) page_address(sg->page); + if (!plat_device_is_coherent(dev) && addr) + __dma_sync(addr + sg->offset, sg->length, direction); + sg->dma_address = plat_map_dma_mem_page(dev, sg->page) + + sg->offset; + } + + return nents; +} + +EXPORT_SYMBOL(dma_map_sg); + +dma_addr_t dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + if (!plat_device_is_coherent(dev)) { + unsigned long addr; + + addr = (unsigned long) page_address(page) + offset; + dma_cache_wback_inv(addr, size); + } + + return plat_map_dma_mem_page(dev, page) + offset; +} + +EXPORT_SYMBOL(dma_map_page); + +void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + if (!plat_device_is_coherent(dev) && direction != DMA_TO_DEVICE) { + unsigned long addr; + + addr = plat_dma_addr_to_phys(dma_address); + dma_cache_wback_inv(addr, size); + } + + plat_unmap_dma_mem(dma_address); +} + +EXPORT_SYMBOL(dma_unmap_page); + +void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, + enum dma_data_direction direction) +{ + unsigned long addr; + int i; + + BUG_ON(direction == DMA_NONE); + + for (i = 0; i < nhwentries; i++, sg++) { + if (!plat_device_is_coherent(dev) && + direction != DMA_TO_DEVICE) { + addr = (unsigned long) page_address(sg->page); + if (addr) + __dma_sync(addr + sg->offset, sg->length, + direction); + } + plat_unmap_dma_mem(sg->dma_address); + } +} + +EXPORT_SYMBOL(dma_unmap_sg); + +void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, + size_t size, enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + if (cpu_is_noncoherent_r10000(dev)) { + unsigned long addr; + + addr = PAGE_OFFSET + plat_dma_addr_to_phys(dma_handle); + __dma_sync(addr, size, direction); + } +} + +EXPORT_SYMBOL(dma_sync_single_for_cpu); + +void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, + size_t size, enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + if (cpu_is_noncoherent_r10000(dev)) { + unsigned long addr; + + addr = plat_dma_addr_to_phys(dma_handle); + __dma_sync(addr, size, direction); + } +} + +EXPORT_SYMBOL(dma_sync_single_for_device); + +void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, + unsigned long offset, size_t size, enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + if (cpu_is_noncoherent_r10000(dev)) { + unsigned long addr; + + addr = PAGE_OFFSET + plat_dma_addr_to_phys(dma_handle); + __dma_sync(addr + offset, size, direction); + } +} + +EXPORT_SYMBOL(dma_sync_single_range_for_cpu); + +void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, + unsigned long offset, size_t size, enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + if (cpu_is_noncoherent_r10000(dev)) { + unsigned long addr; + + addr = PAGE_OFFSET + plat_dma_addr_to_phys(dma_handle); + __dma_sync(addr + offset, size, direction); + } +} + +EXPORT_SYMBOL(dma_sync_single_range_for_device); + +void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, + enum dma_data_direction direction) +{ + int i; + + BUG_ON(direction == DMA_NONE); + + /* Make sure that gcc doesn't leave the empty loop body. */ + for (i = 0; i < nelems; i++, sg++) { + if (!plat_device_is_coherent(dev)) + __dma_sync((unsigned long)page_address(sg->page), + sg->length, direction); + plat_unmap_dma_mem(sg->dma_address); + } +} + +EXPORT_SYMBOL(dma_sync_sg_for_cpu); + +void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, + enum dma_data_direction direction) +{ + int i; + + BUG_ON(direction == DMA_NONE); + + /* Make sure that gcc doesn't leave the empty loop body. */ + for (i = 0; i < nelems; i++, sg++) { + if (!plat_device_is_coherent(dev)) + __dma_sync((unsigned long)page_address(sg->page), + sg->length, direction); + plat_unmap_dma_mem(sg->dma_address); + } +} + +EXPORT_SYMBOL(dma_sync_sg_for_device); + +int dma_mapping_error(dma_addr_t dma_addr) +{ + return 0; +} + +EXPORT_SYMBOL(dma_mapping_error); + +int dma_supported(struct device *dev, u64 mask) +{ + /* + * we fall back to GFP_DMA when the mask isn't all 1s, + * so we can't guarantee allocations that must be + * within a tighter range than GFP_DMA.. + */ + if (mask < 0x00ffffff) + return 0; + + return 1; +} + +EXPORT_SYMBOL(dma_supported); + +int dma_is_consistent(struct device *dev, dma_addr_t dma_addr) +{ + return plat_device_is_coherent(dev); +} + +EXPORT_SYMBOL(dma_is_consistent); + +void dma_cache_sync(struct device *dev, void *vaddr, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + if (!plat_device_is_coherent(dev)) + dma_cache_wback_inv((unsigned long)vaddr, size); +} + +EXPORT_SYMBOL(dma_cache_sync); diff --git a/arch/mips/mm/dma-ip27.c b/arch/mips/mm/dma-ip27.c deleted file mode 100644 index f088344..0000000 --- a/arch/mips/mm/dma-ip27.c +++ /dev/null @@ -1,257 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000 Ani Joshi - * Copyright (C) 2000, 2001 Ralf Baechle - * swiped from i386, and cloned for MIPS by Geert, polished by Ralf. - */ -#include -#include -#include -#include -#include - -#include -#include - -#define pdev_to_baddr(pdev, addr) \ - (BRIDGE_CONTROLLER(pdev->bus)->baddr + (addr)) -#define dev_to_baddr(dev, addr) \ - pdev_to_baddr(to_pci_dev(dev), (addr)) - -void *dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) -{ - void *ret; - - /* ignore region specifiers */ - gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); - - if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff)) - gfp |= GFP_DMA; - ret = (void *) __get_free_pages(gfp, get_order(size)); - - if (ret != NULL) { - memset(ret, 0, size); - *dma_handle = dev_to_baddr(dev, virt_to_phys(ret)); - } - - return ret; -} - -EXPORT_SYMBOL(dma_alloc_noncoherent); - -void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) - __attribute__((alias("dma_alloc_noncoherent"))); - -EXPORT_SYMBOL(dma_alloc_coherent); - -void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) -{ - unsigned long addr = (unsigned long) vaddr; - - free_pages(addr, get_order(size)); -} - -EXPORT_SYMBOL(dma_free_noncoherent); - -void dma_free_coherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) __attribute__((alias("dma_free_noncoherent"))); - -EXPORT_SYMBOL(dma_free_coherent); - -dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - return dev_to_baddr(dev, __pa(ptr)); -} - -EXPORT_SYMBOL(dma_map_single); - -void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_unmap_single); - -int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction direction) -{ - int i; - - BUG_ON(direction == DMA_NONE); - - for (i = 0; i < nents; i++, sg++) { - sg->dma_address = (dma_addr_t) dev_to_baddr(dev, - page_to_phys(sg->page) + sg->offset); - } - - return nents; -} - -EXPORT_SYMBOL(dma_map_sg); - -dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - return dev_to_baddr(dev, page_to_phys(page) + offset); -} - -EXPORT_SYMBOL(dma_map_page); - -void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_unmap_page); - -void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_unmap_sg); - -void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_for_cpu); - -void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_for_device); - -void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_range_for_cpu); - -void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_range_for_device); - -void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_sg_for_cpu); - -void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_sg_for_device); - -int dma_mapping_error(dma_addr_t dma_addr) -{ - return 0; -} - -EXPORT_SYMBOL(dma_mapping_error); - -int dma_supported(struct device *dev, u64 mask) -{ - /* - * we fall back to GFP_DMA when the mask isn't all 1s, - * so we can't guarantee allocations that must be - * within a tighter range than GFP_DMA.. - */ - if (mask < 0x00ffffff) - return 0; - - return 1; -} - -EXPORT_SYMBOL(dma_supported); - -int dma_is_consistent(struct device *dev, dma_addr_t dma_addr) -{ - return 1; -} - -EXPORT_SYMBOL(dma_is_consistent); - -void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_cache_sync); - -dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev, - struct page *page, unsigned long offset, int direction) -{ - dma64_addr_t addr = page_to_phys(page) + offset; - - return (dma64_addr_t) pdev_to_baddr(pdev, addr); -} - -EXPORT_SYMBOL(pci_dac_page_to_dma); - -struct page *pci_dac_dma_to_page(struct pci_dev *pdev, - dma64_addr_t dma_addr) -{ - struct bridge_controller *bc = BRIDGE_CONTROLLER(pdev->bus); - - return pfn_to_page((dma_addr - bc->baddr) >> PAGE_SHIFT); -} - -EXPORT_SYMBOL(pci_dac_dma_to_page); - -unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev, - dma64_addr_t dma_addr) -{ - return dma_addr & ~PAGE_MASK; -} - -EXPORT_SYMBOL(pci_dac_dma_to_offset); - -void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, - dma64_addr_t dma_addr, size_t len, int direction) -{ - BUG_ON(direction == PCI_DMA_NONE); -} - -EXPORT_SYMBOL(pci_dac_dma_sync_single_for_cpu); - -void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, - dma64_addr_t dma_addr, size_t len, int direction) -{ - BUG_ON(direction == PCI_DMA_NONE); -} - -EXPORT_SYMBOL(pci_dac_dma_sync_single_for_device); diff --git a/arch/mips/mm/dma-ip32.c b/arch/mips/mm/dma-ip32.c deleted file mode 100644 index b42b6f7..0000000 --- a/arch/mips/mm/dma-ip32.c +++ /dev/null @@ -1,383 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000 Ani Joshi - * Copyright (C) 2000, 2001 Ralf Baechle - * Copyright (C) 2005 Ilya A. Volynets-Evenbakh - * swiped from i386, and cloned for MIPS by Geert, polished by Ralf. - * IP32 changes by Ilya. - */ -#include -#include -#include -#include -#include - -#include -#include -#include - -/* - * Warning on the terminology - Linux calls an uncached area coherent; - * MIPS terminology calls memory areas with hardware maintained coherency - * coherent. - */ - -/* - * Few notes. - * 1. CPU sees memory as two chunks: 0-256M@0x0, and the rest @0x40000000+256M - * 2. PCI sees memory as one big chunk @0x0 (or we could use 0x40000000 for native-endian) - * 3. All other devices see memory as one big chunk at 0x40000000 - * 4. Non-PCI devices will pass NULL as struct device* - * Thus we translate differently, depending on device. - */ - -#define RAM_OFFSET_MASK 0x3fffffff - -void *dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) -{ - void *ret; - /* ignore region specifiers */ - gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); - - if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff)) - gfp |= GFP_DMA; - ret = (void *) __get_free_pages(gfp, get_order(size)); - - if (ret != NULL) { - unsigned long addr = virt_to_phys(ret)&RAM_OFFSET_MASK; - memset(ret, 0, size); - if(dev==NULL) - addr+= CRIME_HI_MEM_BASE; - *dma_handle = addr; - } - - return ret; -} - -EXPORT_SYMBOL(dma_alloc_noncoherent); - -void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) -{ - void *ret; - - ret = dma_alloc_noncoherent(dev, size, dma_handle, gfp); - if (ret) { - dma_cache_wback_inv((unsigned long) ret, size); - ret = UNCAC_ADDR(ret); - } - - return ret; -} - -EXPORT_SYMBOL(dma_alloc_coherent); - -void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) -{ - free_pages((unsigned long) vaddr, get_order(size)); -} - -EXPORT_SYMBOL(dma_free_noncoherent); - -void dma_free_coherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) -{ - unsigned long addr = (unsigned long) vaddr; - - addr = CAC_ADDR(addr); - free_pages(addr, get_order(size)); -} - -EXPORT_SYMBOL(dma_free_coherent); - -static inline void __dma_sync(unsigned long addr, size_t size, - enum dma_data_direction direction) -{ - switch (direction) { - case DMA_TO_DEVICE: - dma_cache_wback(addr, size); - break; - - case DMA_FROM_DEVICE: - dma_cache_inv(addr, size); - break; - - case DMA_BIDIRECTIONAL: - dma_cache_wback_inv(addr, size); - break; - - default: - BUG(); - } -} - -dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction) -{ - unsigned long addr = (unsigned long) ptr; - - switch (direction) { - case DMA_TO_DEVICE: - dma_cache_wback(addr, size); - break; - - case DMA_FROM_DEVICE: - dma_cache_inv(addr, size); - break; - - case DMA_BIDIRECTIONAL: - dma_cache_wback_inv(addr, size); - break; - - default: - BUG(); - } - - addr = virt_to_phys(ptr)&RAM_OFFSET_MASK; - if(dev == NULL) - addr+=CRIME_HI_MEM_BASE; - return (dma_addr_t)addr; -} - -EXPORT_SYMBOL(dma_map_single); - -void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) -{ - switch (direction) { - case DMA_TO_DEVICE: - break; - - case DMA_FROM_DEVICE: - break; - - case DMA_BIDIRECTIONAL: - break; - - default: - BUG(); - } -} - -EXPORT_SYMBOL(dma_unmap_single); - -int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction direction) -{ - int i; - - BUG_ON(direction == DMA_NONE); - - for (i = 0; i < nents; i++, sg++) { - unsigned long addr; - - addr = (unsigned long) page_address(sg->page)+sg->offset; - if (addr) - __dma_sync(addr, sg->length, direction); - addr = __pa(addr)&RAM_OFFSET_MASK; - if(dev == NULL) - addr += CRIME_HI_MEM_BASE; - sg->dma_address = (dma_addr_t)addr; - } - - return nents; -} - -EXPORT_SYMBOL(dma_map_sg); - -dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - addr = (unsigned long) page_address(page) + offset; - dma_cache_wback_inv(addr, size); - addr = __pa(addr)&RAM_OFFSET_MASK; - if(dev == NULL) - addr += CRIME_HI_MEM_BASE; - - return (dma_addr_t)addr; -} - -EXPORT_SYMBOL(dma_map_page); - -void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - if (direction != DMA_TO_DEVICE) { - unsigned long addr; - - dma_address&=RAM_OFFSET_MASK; - addr = dma_address + PAGE_OFFSET; - if(dma_address>=256*1024*1024) - addr+=CRIME_HI_MEM_BASE; - dma_cache_wback_inv(addr, size); - } -} - -EXPORT_SYMBOL(dma_unmap_page); - -void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, - enum dma_data_direction direction) -{ - unsigned long addr; - int i; - - BUG_ON(direction == DMA_NONE); - - if (direction == DMA_TO_DEVICE) - return; - - for (i = 0; i < nhwentries; i++, sg++) { - addr = (unsigned long) page_address(sg->page); - if (!addr) - continue; - dma_cache_wback_inv(addr + sg->offset, sg->length); - } -} - -EXPORT_SYMBOL(dma_unmap_sg); - -void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - dma_handle&=RAM_OFFSET_MASK; - addr = dma_handle + PAGE_OFFSET; - if(dma_handle>=256*1024*1024) - addr+=CRIME_HI_MEM_BASE; - __dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_sync_single_for_cpu); - -void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - dma_handle&=RAM_OFFSET_MASK; - addr = dma_handle + PAGE_OFFSET; - if(dma_handle>=256*1024*1024) - addr+=CRIME_HI_MEM_BASE; - __dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_sync_single_for_device); - -void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - dma_handle&=RAM_OFFSET_MASK; - addr = dma_handle + offset + PAGE_OFFSET; - if(dma_handle>=256*1024*1024) - addr+=CRIME_HI_MEM_BASE; - __dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_sync_single_range_for_cpu); - -void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - dma_handle&=RAM_OFFSET_MASK; - addr = dma_handle + offset + PAGE_OFFSET; - if(dma_handle>=256*1024*1024) - addr+=CRIME_HI_MEM_BASE; - __dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_sync_single_range_for_device); - -void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - int i; - - BUG_ON(direction == DMA_NONE); - - /* Make sure that gcc doesn't leave the empty loop body. */ - for (i = 0; i < nelems; i++, sg++) - __dma_sync((unsigned long)page_address(sg->page), - sg->length, direction); -} - -EXPORT_SYMBOL(dma_sync_sg_for_cpu); - -void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - int i; - - BUG_ON(direction == DMA_NONE); - - /* Make sure that gcc doesn't leave the empty loop body. */ - for (i = 0; i < nelems; i++, sg++) - __dma_sync((unsigned long)page_address(sg->page), - sg->length, direction); -} - -EXPORT_SYMBOL(dma_sync_sg_for_device); - -int dma_mapping_error(dma_addr_t dma_addr) -{ - return 0; -} - -EXPORT_SYMBOL(dma_mapping_error); - -int dma_supported(struct device *dev, u64 mask) -{ - /* - * we fall back to GFP_DMA when the mask isn't all 1s, - * so we can't guarantee allocations that must be - * within a tighter range than GFP_DMA.. - */ - if (mask < 0x00ffffff) - return 0; - - return 1; -} - -EXPORT_SYMBOL(dma_supported); - -int dma_is_consistent(struct device *dev, dma_addr_t dma_addr) -{ - return 1; -} - -EXPORT_SYMBOL(dma_is_consistent); - -void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction direction) -{ - if (direction == DMA_NONE) - return; - - dma_cache_wback_inv((unsigned long)vaddr, size); -} - -EXPORT_SYMBOL(dma_cache_sync); - diff --git a/arch/mips/mm/dma-noncoherent.c b/arch/mips/mm/dma-noncoherent.c deleted file mode 100644 index 8cecef0..0000000 --- a/arch/mips/mm/dma-noncoherent.c +++ /dev/null @@ -1,370 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000 Ani Joshi - * Copyright (C) 2000, 2001 Ralf Baechle - * swiped from i386, and cloned for MIPS by Geert, polished by Ralf. - */ -#include -#include -#include -#include -#include - -#include -#include - -/* - * Warning on the terminology - Linux calls an uncached area coherent; - * MIPS terminology calls memory areas with hardware maintained coherency - * coherent. - */ - -void *dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) -{ - void *ret; - /* ignore region specifiers */ - gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); - - if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff)) - gfp |= GFP_DMA; - ret = (void *) __get_free_pages(gfp, get_order(size)); - - if (ret != NULL) { - memset(ret, 0, size); - *dma_handle = virt_to_phys(ret); - } - - return ret; -} - -EXPORT_SYMBOL(dma_alloc_noncoherent); - -void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) -{ - void *ret; - - ret = dma_alloc_noncoherent(dev, size, dma_handle, gfp); - if (ret) { - dma_cache_wback_inv((unsigned long) ret, size); - ret = UNCAC_ADDR(ret); - } - - return ret; -} - -EXPORT_SYMBOL(dma_alloc_coherent); - -void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) -{ - free_pages((unsigned long) vaddr, get_order(size)); -} - -EXPORT_SYMBOL(dma_free_noncoherent); - -void dma_free_coherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) -{ - unsigned long addr = (unsigned long) vaddr; - - addr = CAC_ADDR(addr); - free_pages(addr, get_order(size)); -} - -EXPORT_SYMBOL(dma_free_coherent); - -static inline void __dma_sync(unsigned long addr, size_t size, - enum dma_data_direction direction) -{ - switch (direction) { - case DMA_TO_DEVICE: - dma_cache_wback(addr, size); - break; - - case DMA_FROM_DEVICE: - dma_cache_inv(addr, size); - break; - - case DMA_BIDIRECTIONAL: - dma_cache_wback_inv(addr, size); - break; - - default: - BUG(); - } -} - -dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction) -{ - unsigned long addr = (unsigned long) ptr; - - __dma_sync(addr, size, direction); - - return virt_to_phys(ptr); -} - -EXPORT_SYMBOL(dma_map_single); - -void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) -{ - unsigned long addr; - addr = dma_addr + PAGE_OFFSET; - - //__dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_unmap_single); - -int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction direction) -{ - int i; - - BUG_ON(direction == DMA_NONE); - - for (i = 0; i < nents; i++, sg++) { - unsigned long addr; - - addr = (unsigned long) page_address(sg->page); - if (addr) { - __dma_sync(addr + sg->offset, sg->length, direction); - sg->dma_address = (dma_addr_t)page_to_phys(sg->page) - + sg->offset; - } - } - - return nents; -} - -EXPORT_SYMBOL(dma_map_sg); - -dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - addr = (unsigned long) page_address(page) + offset; - dma_cache_wback_inv(addr, size); - - return page_to_phys(page) + offset; -} - -EXPORT_SYMBOL(dma_map_page); - -void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - if (direction != DMA_TO_DEVICE) { - unsigned long addr; - - addr = dma_address + PAGE_OFFSET; - dma_cache_wback_inv(addr, size); - } -} - -EXPORT_SYMBOL(dma_unmap_page); - -void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, - enum dma_data_direction direction) -{ - unsigned long addr; - int i; - - BUG_ON(direction == DMA_NONE); - - if (direction == DMA_TO_DEVICE) - return; - - for (i = 0; i < nhwentries; i++, sg++) { - addr = (unsigned long) page_address(sg->page); - if (addr) - __dma_sync(addr + sg->offset, sg->length, direction); - } -} - -EXPORT_SYMBOL(dma_unmap_sg); - -void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - addr = dma_handle + PAGE_OFFSET; - __dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_sync_single_for_cpu); - -void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - addr = dma_handle + PAGE_OFFSET; - __dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_sync_single_for_device); - -void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - addr = dma_handle + offset + PAGE_OFFSET; - __dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_sync_single_range_for_cpu); - -void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - addr = dma_handle + offset + PAGE_OFFSET; - __dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_sync_single_range_for_device); - -void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - int i; - - BUG_ON(direction == DMA_NONE); - - /* Make sure that gcc doesn't leave the empty loop body. */ - for (i = 0; i < nelems; i++, sg++) - __dma_sync((unsigned long)page_address(sg->page), - sg->length, direction); -} - -EXPORT_SYMBOL(dma_sync_sg_for_cpu); - -void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - int i; - - BUG_ON(direction == DMA_NONE); - - /* Make sure that gcc doesn't leave the empty loop body. */ - for (i = 0; i < nelems; i++, sg++) - __dma_sync((unsigned long)page_address(sg->page), - sg->length, direction); -} - -EXPORT_SYMBOL(dma_sync_sg_for_device); - -int dma_mapping_error(dma_addr_t dma_addr) -{ - return 0; -} - -EXPORT_SYMBOL(dma_mapping_error); - -int dma_supported(struct device *dev, u64 mask) -{ - /* - * we fall back to GFP_DMA when the mask isn't all 1s, - * so we can't guarantee allocations that must be - * within a tighter range than GFP_DMA.. - */ - if (mask < 0x00ffffff) - return 0; - - return 1; -} - -EXPORT_SYMBOL(dma_supported); - -int dma_is_consistent(struct device *dev, dma_addr_t dma_addr) -{ - return 1; -} - -EXPORT_SYMBOL(dma_is_consistent); - -void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction direction) -{ - if (direction == DMA_NONE) - return; - - dma_cache_wback_inv((unsigned long)vaddr, size); -} - -EXPORT_SYMBOL(dma_cache_sync); - -/* The DAC routines are a PCIism.. */ - -#ifdef CONFIG_PCI - -#include - -dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev, - struct page *page, unsigned long offset, int direction) -{ - return (dma64_addr_t)page_to_phys(page) + offset; -} - -EXPORT_SYMBOL(pci_dac_page_to_dma); - -struct page *pci_dac_dma_to_page(struct pci_dev *pdev, - dma64_addr_t dma_addr) -{ - return mem_map + (dma_addr >> PAGE_SHIFT); -} - -EXPORT_SYMBOL(pci_dac_dma_to_page); - -unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev, - dma64_addr_t dma_addr) -{ - return dma_addr & ~PAGE_MASK; -} - -EXPORT_SYMBOL(pci_dac_dma_to_offset); - -void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, - dma64_addr_t dma_addr, size_t len, int direction) -{ - BUG_ON(direction == PCI_DMA_NONE); - - dma_cache_wback_inv(dma_addr + PAGE_OFFSET, len); -} - -EXPORT_SYMBOL(pci_dac_dma_sync_single_for_cpu); - -void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, - dma64_addr_t dma_addr, size_t len, int direction) -{ - BUG_ON(direction == PCI_DMA_NONE); - - dma_cache_wback_inv(dma_addr + PAGE_OFFSET, len); -} - -EXPORT_SYMBOL(pci_dac_dma_sync_single_for_device); - -#endif /* CONFIG_PCI */ diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 82b20c2..bf85995 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -2,7 +2,7 @@ # Makefile for the PCI specific kernel interface routines under Linux. # -obj-y += pci.o +obj-y += pci.o pci-dac.o # # PCI bus host bridge specific code diff --git a/arch/mips/pci/pci-dac.c b/arch/mips/pci/pci-dac.c new file mode 100644 index 0000000..0f0ea1b --- /dev/null +++ b/arch/mips/pci/pci-dac.c @@ -0,0 +1,79 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000 Ani Joshi + * Copyright (C) 2000, 2001, 06 Ralf Baechle + * swiped from i386, and cloned for MIPS by Geert, polished by Ralf. + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include + +#include + +dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev, + struct page *page, unsigned long offset, int direction) +{ + struct device *dev = &pdev->dev; + + BUG_ON(direction == DMA_NONE); + + if (!plat_device_is_coherent(dev)) { + unsigned long addr; + + addr = (unsigned long) page_address(page) + offset; + dma_cache_wback_inv(addr, PAGE_SIZE); + } + + return plat_map_dma_mem_page(dev, page) + offset; +} + +EXPORT_SYMBOL(pci_dac_page_to_dma); + +struct page *pci_dac_dma_to_page(struct pci_dev *pdev, + dma64_addr_t dma_addr) +{ + return pfn_to_page(plat_dma_addr_to_phys(dma_addr) >> PAGE_SHIFT); +} + +EXPORT_SYMBOL(pci_dac_dma_to_page); + +unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev, + dma64_addr_t dma_addr) +{ + return dma_addr & ~PAGE_MASK; +} + +EXPORT_SYMBOL(pci_dac_dma_to_offset); + +void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, + dma64_addr_t dma_addr, size_t len, int direction) +{ + BUG_ON(direction == PCI_DMA_NONE); + + if (!plat_device_is_coherent(&pdev->dev)) + dma_cache_wback_inv(dma_addr + PAGE_OFFSET, len); +} + +EXPORT_SYMBOL(pci_dac_dma_sync_single_for_cpu); + +void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, + dma64_addr_t dma_addr, size_t len, int direction) +{ + BUG_ON(direction == PCI_DMA_NONE); + + if (!plat_device_is_coherent(&pdev->dev)) + dma_cache_wback_inv(dma_addr + PAGE_OFFSET, len); +} + +EXPORT_SYMBOL(pci_dac_dma_sync_single_for_device); diff --git a/include/asm-mips/mach-generic/dma-coherence.h b/include/asm-mips/mach-generic/dma-coherence.h new file mode 100644 index 0000000..df71822 --- /dev/null +++ b/include/asm-mips/mach-generic/dma-coherence.h @@ -0,0 +1,43 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Ralf Baechle + * + */ +#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H +#define __ASM_MACH_GENERIC_DMA_COHERENCE_H + +struct device; + +static dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size) +{ + return virt_to_phys(addr); +} + +static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page) +{ + return page_to_phys(page); +} + +static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) +{ + return dma_addr; +} + +static void plat_unmap_dma_mem(dma_addr_t dma_addr) +{ +} + +static inline int plat_device_is_coherent(struct device *dev) +{ +#ifdef CONFIG_DMA_COHERENT + return 1; +#endif +#ifdef CONFIG_DMA_NONCOHERENT + return 0; +#endif +} + +#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */ diff --git a/include/asm-mips/mach-generic/kmalloc.h b/include/asm-mips/mach-generic/kmalloc.h index 410ab5f..b8e6deb 100644 --- a/include/asm-mips/mach-generic/kmalloc.h +++ b/include/asm-mips/mach-generic/kmalloc.h @@ -5,6 +5,7 @@ #ifndef CONFIG_DMA_COHERENT /* * Total overkill for most systems but need as a safe default. + * Set this one if any device in the system might do non-coherent DMA. */ #define ARCH_KMALLOC_MINALIGN 128 #endif diff --git a/include/asm-mips/mach-ip27/dma-coherence.h b/include/asm-mips/mach-ip27/dma-coherence.h new file mode 100644 index 0000000..659816e --- /dev/null +++ b/include/asm-mips/mach-ip27/dma-coherence.h @@ -0,0 +1,49 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Ralf Baechle + * + */ +#ifndef __ASM_MACH_IP27_DMA_COHERENCE_H +#define __ASM_MACH_IP27_DMA_COHERENCE_H + +#include + +#define pdev_to_baddr(pdev, addr) \ + (BRIDGE_CONTROLLER(pdev->bus)->baddr + (addr)) +#define dev_to_baddr(dev, addr) \ + pdev_to_baddr(to_pci_dev(dev), (addr)) + +struct device; + +static dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size) +{ + dma_addr_t pa = dev_to_baddr(dev, virt_to_phys(addr)); + + return pa; +} + +static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page) +{ + dma_addr_t pa = dev_to_baddr(dev, page_to_phys(page)); + + return pa; +} + +static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) +{ + return dma_addr & (0xffUL << 56); +} + +static void plat_unmap_dma_mem(dma_addr_t dma_addr) +{ +} + +static inline int plat_device_is_coherent(struct device *dev) +{ + return 1; /* IP27 non-cohernet mode is unsupported */ +} + +#endif /* __ASM_MACH_IP27_DMA_COHERENCE_H */ diff --git a/include/asm-mips/mach-ip32/dma-coherence.h b/include/asm-mips/mach-ip32/dma-coherence.h new file mode 100644 index 0000000..950be17 --- /dev/null +++ b/include/asm-mips/mach-ip32/dma-coherence.h @@ -0,0 +1,71 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Ralf Baechle + * + */ +#ifndef __ASM_MACH_IP35_DMA_COHERENCE_H +#define __ASM_MACH_IP35_DMA_COHERENCE_H + +#include + +struct device; + +/* + * Few notes. + * 1. CPU sees memory as two chunks: 0-256M@0x0, and the rest @0x40000000+256M + * 2. PCI sees memory as one big chunk @0x0 (or we could use 0x40000000 for + * native-endian) + * 3. All other devices see memory as one big chunk at 0x40000000 + * 4. Non-PCI devices will pass NULL as struct device* + * + * Thus we translate differently, depending on device. + */ + +#define RAM_OFFSET_MASK 0x3fffffffUL + +static dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size) +{ + dma_addr_t pa = virt_to_phys(addr) & RAM_OFFSET_MASK; + + if (dev == NULL) + pa += CRIME_HI_MEM_BASE; + + return pa; +} + +static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page) +{ + dma_addr_t pa; + + pa = page_to_phys(page) & RAM_OFFSET_MASK; + + if (dev == NULL) + pa += CRIME_HI_MEM_BASE; + + return pa; +} + +/* This is almost certainly wrong but it's what dma-ip32.c used to use */ +static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) +{ + unsigned long addr = dma_addr & RAM_OFFSET_MASK; + + if (dma_addr >= 256*1024*1024) + addr += CRIME_HI_MEM_BASE; + + return addr; +} + +static void plat_unmap_dma_mem(dma_addr_t dma_addr) +{ +} + +static inline int plat_device_is_coherent(struct device *dev) +{ + return 0; /* IP32 is non-cohernet */ +} + +#endif /* __ASM_MACH_IP35_DMA_COHERENCE_H */ diff --git a/include/asm-mips/mach-jazz/dma-coherence.h b/include/asm-mips/mach-jazz/dma-coherence.h new file mode 100644 index 0000000..d66979a --- /dev/null +++ b/include/asm-mips/mach-jazz/dma-coherence.h @@ -0,0 +1,40 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Ralf Baechle + */ +#ifndef __ASM_MACH_JAZZ_DMA_COHERENCE_H +#define __ASM_MACH_JAZZ_DMA_COHERENCE_H + +#include + +struct device; + +static dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size) +{ + return vdma_alloc(virt_to_phys(addr), size); +} + +static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page) +{ + return vdma_alloc(page_to_phys(page), PAGE_SIZE); +} + +static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) +{ + return vdma_log2phys(dma_addr); +} + +static void plat_unmap_dma_mem(dma_addr_t dma_addr) +{ + vdma_free(dma_addr); +} + +static inline int plat_device_is_coherent(struct device *dev) +{ + return 0; +} + +#endif /* __ASM_MACH_JAZZ_DMA_COHERENCE_H */ -- cgit v0.10.2 From 84b47a959b55930e86d6178d49769bc9ba34bce1 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 12 Feb 2007 22:22:53 +0000 Subject: [MIPS] Don't claim we support dma_declare_coherent_memory - we don't. Signed-off-by: Ralf Baechle diff --git a/include/asm-mips/dma-mapping.h b/include/asm-mips/dma-mapping.h index 236d1a4..230b3f1 100644 --- a/include/asm-mips/dma-mapping.h +++ b/include/asm-mips/dma-mapping.h @@ -68,6 +68,7 @@ extern int dma_is_consistent(struct device *dev, dma_addr_t dma_addr); extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size, enum dma_data_direction direction); +#if 0 #define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY extern int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, @@ -75,5 +76,6 @@ extern int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, extern void dma_release_declared_memory(struct device *dev); extern void * dma_mark_declared_memory_occupied(struct device *dev, dma_addr_t device_addr, size_t size); +#endif #endif /* _ASM_DMA_MAPPING_H */ -- cgit v0.10.2 From cd1fb9eabea38489579284e0cae0c7019b77b10f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 12 Feb 2007 23:12:38 +0000 Subject: Revert "[MIPS] Fix warning in get_user when fetching pointer object from userspace." This reverts commit 4ed3a77f38c023658784804cb39a7ce18063dc88. diff --git a/include/asm-mips/uaccess.h b/include/asm-mips/uaccess.h index 825fcbd..c12ebc5 100644 --- a/include/asm-mips/uaccess.h +++ b/include/asm-mips/uaccess.h @@ -265,6 +265,8 @@ do { \ */ #define __get_user_asm_ll32(val, addr) \ { \ + unsigned long long __gu_tmp; \ + \ __asm__ __volatile__( \ "1: lw %1, (%3) \n" \ "2: lw %D1, 4(%3) \n" \ @@ -279,8 +281,9 @@ do { \ " " __UA_ADDR " 1b, 4b \n" \ " " __UA_ADDR " 2b, 4b \n" \ " .previous \n" \ - : "=r" (__gu_err), "=&r" (val) \ + : "=r" (__gu_err), "=&r" (__gu_tmp) \ : "0" (0), "r" (addr), "i" (-EFAULT)); \ + (val) = (__typeof__(*(addr))) __gu_tmp; \ } /* -- cgit v0.10.2 From af3d10d52d38d2c56a8bca9943c07b00031fc718 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 12 Feb 2007 23:26:01 +0000 Subject: [MIPS] IP27: Enable N32 support in defconfig. Signed-off-by: Ralf Baechle diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index 96090f2..f21186c 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -264,7 +264,7 @@ CONFIG_BINFMT_ELF=y CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_MIPS32_O32=y -# CONFIG_MIPS32_N32 is not set +CONFIG_MIPS32_N32=y CONFIG_BINFMT_ELF32=y # -- cgit v0.10.2 From dd02f06aa96ab4590da12704366450a2d4753d3c Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 13 Feb 2007 00:50:57 +0000 Subject: [MIPS] signal: Fix warnings in o32 compat code. Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index 183fc7e..1b9262d 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -139,8 +139,20 @@ struct ucontext32 { sigset_t32 uc_sigmask; /* mask last for extensibility */ }; +/* + * Horribly complicated - with the bloody RM9000 workarounds enabled + * the signal trampolines is moving to the end of the structure so we can + * increase the alignment without breaking software compatibility. + */ #if ICACHE_REFILLS_WORKAROUND_WAR == 0 +struct sigframe32 { + u32 sf_ass[4]; /* argument save space for o32 */ + u32 sf_code[2]; /* signal trampoline */ + struct sigcontext32 sf_sc; + sigset_t sf_mask; +}; + struct rt_sigframe32 { u32 rs_ass[4]; /* argument save space for o32 */ u32 rs_code[2]; /* signal trampoline */ @@ -150,6 +162,14 @@ struct rt_sigframe32 { #else /* ICACHE_REFILLS_WORKAROUND_WAR */ +struct sigframe32 { + u32 sf_ass[4]; /* argument save space for o32 */ + u32 sf_pad[2]; + struct sigcontext32 sf_sc; /* hw context */ + sigset_t sf_mask; + u32 sf_code[8] ____cacheline_aligned; /* signal trampoline */ +}; + struct rt_sigframe32 { u32 rs_ass[4]; /* argument save space for o32 */ u32 rs_pad[2]; @@ -493,10 +513,10 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from) asmlinkage void sys32_sigreturn(nabi_no_regargs struct pt_regs regs) { - struct sigframe __user *frame; + struct sigframe32 __user *frame; sigset_t blocked; - frame = (struct sigframe __user *) regs.regs[29]; + frame = (struct sigframe32 __user *) regs.regs[29]; if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) goto badframe; if (__copy_from_user(&blocked, &frame->sf_mask, sizeof(blocked))) @@ -581,7 +601,7 @@ badframe: int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs, int signr, sigset_t *set) { - struct sigframe __user *frame; + struct sigframe32 __user *frame; int err = 0; frame = get_sigframe(ka, regs, sizeof(*frame)); -- cgit v0.10.2 From 205d84aaea380bbd1cc1079d44086cd50c2c2dad Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 13 Feb 2007 01:28:09 +0000 Subject: [MIPS] signal: Move {restore,setup}_sigcontext prototypes to their user Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h index 9a8abd6..d9a832f 100644 --- a/arch/mips/kernel/signal-common.h +++ b/arch/mips/kernel/signal-common.h @@ -46,12 +46,6 @@ struct sigframe { #endif /* !ICACHE_REFILLS_WORKAROUND_WAR */ /* - * handle hardware context - */ -extern int setup_sigcontext(struct pt_regs *, struct sigcontext __user *); -extern int restore_sigcontext(struct pt_regs *, struct sigcontext __user *); - -/* * Determine which stack to use.. */ extern void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c index 57456e6..b17ef04 100644 --- a/arch/mips/kernel/signal_n32.c +++ b/arch/mips/kernel/signal_n32.c @@ -49,6 +49,10 @@ #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) +extern int setup_sigcontext(struct pt_regs *, struct sigcontext __user *); +extern int restore_sigcontext(struct pt_regs *, struct sigcontext __user *); + + /* IRIX compatible stack_t */ typedef struct sigaltstack32 { s32 ss_sp; -- cgit v0.10.2 From 66680583461d7cae281cef63c050c9b6371e3286 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 13 Feb 2007 01:31:48 +0000 Subject: [MIPS] signal: Move sigframe definition for native O32/N64 into signal.c Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h index d9a832f..b95e542 100644 --- a/arch/mips/kernel/signal-common.h +++ b/arch/mips/kernel/signal-common.h @@ -20,32 +20,6 @@ #endif /* - * Horribly complicated - with the bloody RM9000 workarounds enabled - * the signal trampolines is moving to the end of the structure so we can - * increase the alignment without breaking software compatibility. - */ -#if ICACHE_REFILLS_WORKAROUND_WAR == 0 - -struct sigframe { - u32 sf_ass[4]; /* argument save space for o32 */ - u32 sf_code[2]; /* signal trampoline */ - struct sigcontext sf_sc; - sigset_t sf_mask; -}; - -#else /* ICACHE_REFILLS_WORKAROUND_WAR */ - -struct sigframe { - u32 sf_ass[4]; /* argument save space for o32 */ - u32 sf_pad[2]; - struct sigcontext sf_sc; /* hw context */ - sigset_t sf_mask; - u32 sf_code[8] ____cacheline_aligned; /* signal trampoline */ -}; - -#endif /* !ICACHE_REFILLS_WORKAROUND_WAR */ - -/* * Determine which stack to use.. */ extern void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index 54398af..e7b0492 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -36,8 +36,20 @@ #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) +/* + * Horribly complicated - with the bloody RM9000 workarounds enabled + * the signal trampolines is moving to the end of the structure so we can + * increase the alignment without breaking software compatibility. + */ #if ICACHE_REFILLS_WORKAROUND_WAR == 0 +struct sigframe { + u32 sf_ass[4]; /* argument save space for o32 */ + u32 sf_code[2]; /* signal trampoline */ + struct sigcontext sf_sc; + sigset_t sf_mask; +}; + struct rt_sigframe { u32 rs_ass[4]; /* argument save space for o32 */ u32 rs_code[2]; /* signal trampoline */ @@ -47,6 +59,14 @@ struct rt_sigframe { #else +struct sigframe { + u32 sf_ass[4]; /* argument save space for o32 */ + u32 sf_pad[2]; + struct sigcontext sf_sc; /* hw context */ + sigset_t sf_mask; + u32 sf_code[8] ____cacheline_aligned; /* signal trampoline */ +}; + struct rt_sigframe { u32 rs_ass[4]; /* argument save space for o32 */ u32 rs_pad[2]; -- cgit v0.10.2 From 24c556e99ec8a61ce1fbc75bee61dc19edf2c4df Mon Sep 17 00:00:00 2001 From: Franck Bui-Huu Date: Fri, 9 Feb 2007 16:07:37 +0100 Subject: [MIPS] signals: make common _BLOCKABLE macro Signed-off-by: Franck Bui-Huu Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h index b95e542..fdbdbdc 100644 --- a/arch/mips/kernel/signal-common.h +++ b/arch/mips/kernel/signal-common.h @@ -19,6 +19,8 @@ # define DEBUGP(fmt, args...) #endif +#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) + /* * Determine which stack to use.. */ diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index e7b0492..b2e9ab1 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -34,8 +34,6 @@ #include "signal-common.h" -#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) - /* * Horribly complicated - with the bloody RM9000 workarounds enabled * the signal trampolines is moving to the end of the structure so we can diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index 1b9262d..db00c33 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -104,8 +104,6 @@ typedef struct compat_siginfo { #define __NR_O32_rt_sigreturn 4193 #define __NR_O32_restart_syscall 4253 -#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) - /* 32-bit compatibility types */ #define _NSIG_BPW32 32 diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c index b17ef04..1a5f248 100644 --- a/arch/mips/kernel/signal_n32.c +++ b/arch/mips/kernel/signal_n32.c @@ -47,8 +47,6 @@ #define __NR_N32_rt_sigreturn 6211 #define __NR_N32_restart_syscall 6214 -#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) - extern int setup_sigcontext(struct pt_regs *, struct sigcontext __user *); extern int restore_sigcontext(struct pt_regs *, struct sigcontext __user *); -- cgit v0.10.2 From d01f06ef0c783eceb53030fc5407caa94586bd6a Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 12 Feb 2007 23:48:26 +0900 Subject: [MIPS] DECstation: Fix irq handling When I post a patch (commit f431baa55abf8adeed0c718b51deacbc151f58f1), I just tried to not change behavior of existing codes, but it seems dec/int-handler.S had been broken since its previous commit 937a801576f954bd030d7c4a5a94571710d87c0b. The caller of plat_irq_dispatch do setup/restore TI_REGS($28), so dec's plat_irq_dispatch should not do it, and there is no need to adjust RA. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S index b251ef8..00cecdc 100644 --- a/arch/mips/dec/int-handler.S +++ b/arch/mips/dec/int-handler.S @@ -264,9 +264,6 @@ srlv t3,t1,t2 handle_it: - LONG_L s0, TI_REGS($28) - LONG_S sp, TI_REGS($28) - PTR_LA ra, ret_from_irq j dec_irq_dispatch nop @@ -277,7 +274,6 @@ fpu: #endif spurious: - PTR_LA ra, _ret_from_irq j spurious_interrupt nop END(plat_irq_dispatch) -- cgit v0.10.2 From cb66fb3f156b485b22db97db22e96db4786dc68b Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 13 Feb 2007 11:45:24 +0000 Subject: [MIPS] 32-bit: Fix warning about cast for fetching pointer from userspace. Signed-off-by: Ralf Baechle diff --git a/include/asm-mips/uaccess.h b/include/asm-mips/uaccess.h index c12ebc5..36b3a42 100644 --- a/include/asm-mips/uaccess.h +++ b/include/asm-mips/uaccess.h @@ -265,7 +265,10 @@ do { \ */ #define __get_user_asm_ll32(val, addr) \ { \ - unsigned long long __gu_tmp; \ + union { \ + unsigned long long l; \ + __typeof__(*(addr)) t; \ + } __gu_tmp; \ \ __asm__ __volatile__( \ "1: lw %1, (%3) \n" \ @@ -281,9 +284,10 @@ do { \ " " __UA_ADDR " 1b, 4b \n" \ " " __UA_ADDR " 2b, 4b \n" \ " .previous \n" \ - : "=r" (__gu_err), "=&r" (__gu_tmp) \ + : "=r" (__gu_err), "=&r" (__gu_tmp.l) \ : "0" (0), "r" (addr), "i" (-EFAULT)); \ - (val) = (__typeof__(*(addr))) __gu_tmp; \ + \ + (val) = __gu_tmp.t; \ } /* -- cgit v0.10.2 From 6f3aa38e191326a82d5dcae1f6cdc88b1d9a8d32 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 13 Feb 2007 15:01:21 +0000 Subject: [MIPS] Remove stray instruction from __get_user_asm_ll32. This did result in double clearing of the error return value on success only but should make a meassurable overhead for sigreturn. Signed-off-by: Ralf Baechle diff --git a/include/asm-mips/uaccess.h b/include/asm-mips/uaccess.h index 36b3a42..3eff8d8 100644 --- a/include/asm-mips/uaccess.h +++ b/include/asm-mips/uaccess.h @@ -273,7 +273,6 @@ do { \ __asm__ __volatile__( \ "1: lw %1, (%3) \n" \ "2: lw %D1, 4(%3) \n" \ - " move %0, $0 \n" \ "3: .section .fixup,\"ax\" \n" \ "4: li %0, %4 \n" \ " move %1, $0 \n" \ -- cgit v0.10.2 From 7da8a581f5ec0ecac5f0afc9ec26ce13b780d48d Mon Sep 17 00:00:00 2001 From: Franck Bui-Huu Date: Tue, 13 Feb 2007 14:50:18 +0100 Subject: [MIPS] Make entry.S a little more readable. When CONFIG_PREEMPT is not set, it also moves one branch instruction from ret_from_irq() to ret_from_exception(). Therefore we favour the return from irq case which should be more common than the other one. Signed-off-by: Franck Bui-Huu Acked-by: Atsushi Nemoto Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S index f10b6a1..0b78fcb 100644 --- a/arch/mips/kernel/entry.S +++ b/arch/mips/kernel/entry.S @@ -21,24 +21,21 @@ #endif #ifndef CONFIG_PREEMPT - .macro preempt_stop - local_irq_disable - .endm #define resume_kernel restore_all +#else +#define __ret_from_irq ret_from_exception #endif .text .align 5 -FEXPORT(ret_from_irq) - LONG_S s0, TI_REGS($28) -#ifdef CONFIG_PREEMPT -FEXPORT(ret_from_exception) -#else - b _ret_from_irq +#ifndef CONFIG_PREEMPT FEXPORT(ret_from_exception) - preempt_stop + local_irq_disable # preempt stop + b __ret_from_irq #endif -FEXPORT(_ret_from_irq) +FEXPORT(ret_from_irq) + LONG_S s0, TI_REGS($28) +FEXPORT(__ret_from_irq) LONG_L t0, PT_STATUS(sp) # returning to kernel mode? andi t0, t0, KU_USER beqz t0, resume_kernel -- cgit v0.10.2 From 366d6aef281a670b32a51d289fc07bf0e5e72d9a Mon Sep 17 00:00:00 2001 From: Andrew Sharp Date: Fri, 9 Feb 2007 17:35:28 -0800 Subject: [MIPS] Fix uniprocessor Sibyte builds. Signed-off-by: Andrew Sharp Signed-off-by: Ralf Baechle diff --git a/arch/mips/mm/c-sb1.c b/arch/mips/mm/c-sb1.c index 3a8afd4..9ea460b 100644 --- a/arch/mips/mm/c-sb1.c +++ b/arch/mips/mm/c-sb1.c @@ -259,6 +259,12 @@ static void sb1_flush_cache_data_page(unsigned long addr) on_each_cpu(sb1_flush_cache_data_page_ipi, (void *) addr, 1, 1); } #else + +static void local_sb1_flush_cache_data_page(unsigned long addr) +{ + __sb1_writeback_inv_dcache_range(addr, addr + PAGE_SIZE); +} + void sb1_flush_cache_data_page(unsigned long) __attribute__((alias("local_sb1_flush_cache_data_page"))); #endif -- cgit v0.10.2 From 431dc8040354db65e4f8d4d4e21ae4fab41f5bc3 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 13 Feb 2007 00:05:11 +0000 Subject: [MIPS] Fix sigset_t endianess swapping issues in 32-bit compat code. Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index ca7ad78..fc4dd6c 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -39,6 +39,7 @@ #include #include +#include #include #include #include @@ -736,3 +737,49 @@ _sys32_clone(nabi_no_regargs struct pt_regs regs) return do_fork(clone_flags, newsp, ®s, 0, parent_tidptr, child_tidptr); } + +/* + * Implement the event wait interface for the eventpoll file. It is the kernel + * part of the user space epoll_pwait(2). + */ +asmlinkage long compat_sys_epoll_pwait(int epfd, + struct epoll_event __user *events, int maxevents, int timeout, + const compat_sigset_t __user *sigmask, size_t sigsetsize) +{ + int error; + sigset_t ksigmask, sigsaved; + + /* + * If the caller wants a certain signal mask to be set during the wait, + * we apply it here. + */ + if (sigmask) { + if (sigsetsize != sizeof(sigset_t)) + return -EINVAL; + if (!access_ok(VERIFY_READ, sigmask, sizeof(ksigmask))) + return -EFAULT; + if (__copy_conv_sigset_from_user(&ksigmask, sigmask)) + return -EFAULT; + sigdelsetmask(&ksigmask, sigmask(SIGKILL) | sigmask(SIGSTOP)); + sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved); + } + + error = sys_epoll_wait(epfd, events, maxevents, timeout); + + /* + * If we changed the signal mask, we need to restore the original one. + * In case we've got a signal while waiting, we do not restore the + * signal mask yet, and we allow do_signal() to deliver the signal on + * the way back to userspace, before the signal mask is restored. + */ + if (sigmask) { + if (error == -EINTR) { + memcpy(¤t->saved_sigmask, &sigsaved, + sizeof(sigsaved)); + set_thread_flag(TIF_RESTORE_SIGMASK); + } else + sigprocmask(SIG_SETMASK, &sigsaved, NULL); + } + + return error; +} diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index e569b84..10e9a18 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -470,4 +470,4 @@ sys_call_table: PTR sys_get_robust_list PTR sys_kexec_load /* 5270 */ PTR sys_getcpu - PTR sys_epoll_pwait + PTR compat_sys_epoll_pwait diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index ee8802b..2ceda46 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -396,4 +396,4 @@ EXPORT(sysn32_call_table) PTR compat_sys_get_robust_list PTR compat_sys_kexec_load PTR sys_getcpu - PTR sys_epoll_pwait + PTR compat_sys_epoll_pwait diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index db00c33..c28cb21 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -8,6 +8,7 @@ * Copyright (C) 1999, 2000 Silicon Graphics, Inc. */ #include +#include #include #include #include @@ -24,6 +25,7 @@ #include #include +#include #include #include #include @@ -517,7 +519,7 @@ asmlinkage void sys32_sigreturn(nabi_no_regargs struct pt_regs regs) frame = (struct sigframe32 __user *) regs.regs[29]; if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) goto badframe; - if (__copy_from_user(&blocked, &frame->sf_mask, sizeof(blocked))) + if (__copy_conv_sigset_from_user(&blocked, &frame->sf_mask)) goto badframe; sigdelsetmask(&blocked, ~_BLOCKABLE); @@ -554,7 +556,7 @@ asmlinkage void sys32_rt_sigreturn(nabi_no_regargs struct pt_regs regs) frame = (struct rt_sigframe32 __user *) regs.regs[29]; if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) goto badframe; - if (__copy_from_user(&set, &frame->rs_uc.uc_sigmask, sizeof(set))) + if (__copy_conv_sigset_from_user(&set, &frame->rs_uc.uc_sigmask)) goto badframe; sigdelsetmask(&set, ~_BLOCKABLE); @@ -609,7 +611,8 @@ int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs, err |= install_sigtramp(frame->sf_code, __NR_O32_sigreturn); err |= setup_sigcontext32(regs, &frame->sf_sc); - err |= __copy_to_user(&frame->sf_mask, set, sizeof(*set)); + err |= __copy_conv_sigset_to_user(&frame->sf_mask, set); + if (err) goto give_sigsegv; @@ -668,7 +671,7 @@ int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs, err |= __put_user(current->sas_ss_size, &frame->rs_uc.uc_stack.ss_size); err |= setup_sigcontext32(regs, &frame->rs_uc.uc_mcontext); - err |= __copy_to_user(&frame->rs_uc.uc_sigmask, set, sizeof(*set)); + err |= __copy_conv_sigset_to_user(&frame->rs_uc.uc_sigmask, set); if (err) goto give_sigsegv; diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c index 1a5f248..7ca2a07 100644 --- a/arch/mips/kernel/signal_n32.c +++ b/arch/mips/kernel/signal_n32.c @@ -31,6 +31,7 @@ #include #include +#include #include #include #include @@ -63,7 +64,7 @@ struct ucontextn32 { s32 uc_link; stack32_t uc_stack; struct sigcontext uc_mcontext; - sigset_t uc_sigmask; /* mask last for extensibility */ + compat_sigset_t uc_sigmask; /* mask last for extensibility */ }; #if ICACHE_REFILLS_WORKAROUND_WAR == 0 @@ -129,7 +130,7 @@ asmlinkage void sysn32_rt_sigreturn(nabi_no_regargs struct pt_regs regs) frame = (struct rt_sigframe_n32 __user *) regs.regs[29]; if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) goto badframe; - if (__copy_from_user(&set, &frame->rs_uc.uc_sigmask, sizeof(set))) + if (__copy_conv_sigset_from_user(&set, &frame->rs_uc.uc_sigmask)) goto badframe; sigdelsetmask(&set, ~_BLOCKABLE); @@ -195,7 +196,7 @@ int setup_rt_frame_n32(struct k_sigaction * ka, err |= __put_user(current->sas_ss_size, &frame->rs_uc.uc_stack.ss_size); err |= setup_sigcontext(regs, &frame->rs_uc.uc_mcontext); - err |= __copy_to_user(&frame->rs_uc.uc_sigmask, set, sizeof(*set)); + err |= __copy_conv_sigset_to_user(&frame->rs_uc.uc_sigmask, set); if (err) goto give_sigsegv; diff --git a/include/asm-mips/compat-signal.h b/include/asm-mips/compat-signal.h new file mode 100644 index 0000000..6720770 --- /dev/null +++ b/include/asm-mips/compat-signal.h @@ -0,0 +1,55 @@ +#ifndef __ASM_COMPAT_SIGNAL_H +#define __ASM_COMPAT_SIGNAL_H + +#include +#include +#include + +static inline int __copy_conv_sigset_to_user(compat_sigset_t __user *d, + const sigset_t *s) +{ + int err; + + BUG_ON(sizeof(*d) != sizeof(*s)); + BUG_ON(_NSIG_WORDS != 2); + + err = __put_user(s->sig[0], &d->sig[0]); + err |= __put_user(s->sig[0] >> 32, &d->sig[1]); + err |= __put_user(s->sig[1], &d->sig[2]); + err |= __put_user(s->sig[1] >> 32, &d->sig[3]); + + return err; +} + +static inline int __copy_conv_sigset_from_user(sigset_t *d, + const compat_sigset_t __user *s) +{ + int err; + union sigset_u { + sigset_t s; + compat_sigset_t c; + } *u = (union sigset_u *) d; + + BUG_ON(sizeof(*d) != sizeof(*s)); + BUG_ON(_NSIG_WORDS != 2); + + if (unlikely(!access_ok(VERIFY_READ, d, sizeof(*d)))) + return -EFAULT; + +#ifdef CONFIG_CPU_BIG_ENDIAN + err = __get_user(u->c.sig[1], &s->sig[0]); + err |= __get_user(u->c.sig[0], &s->sig[1]); + err |= __get_user(u->c.sig[3], &s->sig[2]); + err |= __get_user(u->c.sig[2], &s->sig[3]); +#endif +#ifdef CONFIG_CPU_LITTLE_ENDIAN + err = __get_user(u->c.sig[0], &s->sig[0]); + err |= __get_user(u->c.sig[1], &s->sig[1]); + err |= __get_user(u->c.sig[2], &s->sig[2]); + err |= __get_user(u->c.sig[3], &s->sig[3]); +#endif + + return err; +} + +#endif /* __ASM_COMPAT_SIGNAL_H */ -- cgit v0.10.2 From 7f1f86a0d04e79f8165e6f50d329a520b8cd11e5 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Tue, 13 Feb 2007 14:38:58 -0700 Subject: [PATCH] Fix SAK_work workqueue initialization. Somewhere in the rewrite of the work queues my cleanup of SAK handling got broken. Maybe I didn't retest it properly or possibly the API was changing so fast I missed something. Regardless currently triggering a SAK now generates an ugly BUG_ON and kills the kernel. Thanks to Alexey Dobriyan for spotting this. This modifies the use of SAK_work to initialize it when the data structure it resides in is initialized, and to simply call schedule_work when we need to generate a SAK. I update both data structures that have a SAK_work member for consistency. All of the old PREPARE_WORK calls that are now gone. If we call schedule_work again before it has processed it has generated the first SAK it will simply ignore the duplicate schedule_work request. Signed-off-by: Eric W. Biederman Signed-off-by: Linus Torvalds diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c index c654a3e..cb8d691 100644 --- a/drivers/char/keyboard.c +++ b/drivers/char/keyboard.c @@ -596,7 +596,6 @@ static void fn_spawn_con(struct vc_data *vc) static void fn_SAK(struct vc_data *vc) { struct work_struct *SAK_work = &vc_cons[fg_console].SAK_work; - PREPARE_WORK(SAK_work, vc_SAK); schedule_work(SAK_work); } diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c index 3757610..be73c80 100644 --- a/drivers/char/sysrq.c +++ b/drivers/char/sysrq.c @@ -89,7 +89,6 @@ static struct sysrq_key_op sysrq_loglevel_op = { static void sysrq_handle_SAK(int key, struct tty_struct *tty) { struct work_struct *SAK_work = &vc_cons[fg_console].SAK_work; - PREPARE_WORK(SAK_work, vc_SAK); schedule_work(SAK_work); } static struct sysrq_key_op sysrq_SAK_op = { diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index 65672c5..5289254 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -3442,7 +3442,6 @@ void do_SAK(struct tty_struct *tty) { if (!tty) return; - PREPARE_WORK(&tty->SAK_work, do_SAK_work); schedule_work(&tty->SAK_work); } @@ -3568,7 +3567,7 @@ static void initialize_tty_struct(struct tty_struct *tty) mutex_init(&tty->atomic_write_lock); spin_lock_init(&tty->read_lock); INIT_LIST_HEAD(&tty->tty_files); - INIT_WORK(&tty->SAK_work, NULL); + INIT_WORK(&tty->SAK_work, do_SAK_work); } /* diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 94ce3e7..c3f8e38 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -2635,6 +2635,7 @@ static int __init con_init(void) */ for (currcons = 0; currcons < MIN_NR_CONSOLES; currcons++) { vc_cons[currcons].d = vc = alloc_bootmem(sizeof(struct vc_data)); + INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK); visual_init(vc, currcons, 1); vc->vc_screenbuf = (unsigned short *)alloc_bootmem(vc->vc_screenbuf_size); vc->vc_kmalloced = 0; -- cgit v0.10.2 From 577830b034bc11c93d4b9e21e8782900d5485e7f Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 8 Feb 2007 18:33:51 +1100 Subject: [POWERPC] Consolidate pseries platform header files into pseries.h Following the example of platforms/pasemi, consolidate a couple of tiny header files in platforms/pseries into pseries.h. This gives us a convenient place to put things that need to be available to the platform code, but not public. And hopefully will help people resist the temptation of sticking externs in C files. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/platforms/pseries/firmware.h b/arch/powerpc/platforms/pseries/firmware.h deleted file mode 100644 index 714f56f..0000000 --- a/arch/powerpc/platforms/pseries/firmware.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Copyright 2006 IBM Corporation. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _PSERIES_FIRMWARE_H -#define _PSERIES_FIRMWARE_H - -#include - -extern void __init fw_feature_init(void); - -#endif /* _PSERIES_FIRMWARE_H */ diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h new file mode 100644 index 0000000..37618cb --- /dev/null +++ b/arch/powerpc/platforms/pseries/pseries.h @@ -0,0 +1,20 @@ +/* + * Copyright 2006 IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _PSERIES_PSERIES_H +#define _PSERIES_PSERIES_H + +extern void __init fw_feature_init(void); + +struct pt_regs; + +extern int pSeries_system_reset_exception(struct pt_regs *regs); +extern int pSeries_machine_check_exception(struct pt_regs *regs); + +#endif /* _PSERIES_PSERIES_H */ diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c index b1d3d16..edc0388 100644 --- a/arch/powerpc/platforms/pseries/ras.c +++ b/arch/powerpc/platforms/pseries/ras.c @@ -51,7 +51,7 @@ #include #include -#include "ras.h" +#include "pseries.h" static unsigned char ras_log_buf[RTAS_ERROR_LOG_MAX]; static DEFINE_SPINLOCK(ras_log_buf_lock); diff --git a/arch/powerpc/platforms/pseries/ras.h b/arch/powerpc/platforms/pseries/ras.h deleted file mode 100644 index 0e66b0d..0000000 --- a/arch/powerpc/platforms/pseries/ras.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _PSERIES_RAS_H -#define _PSERIES_RAS_H - -struct pt_regs; - -extern int pSeries_system_reset_exception(struct pt_regs *regs); -extern int pSeries_machine_check_exception(struct pt_regs *regs); - -#endif /* _PSERIES_RAS_H */ diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 042ecae..a28264c 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -65,10 +65,10 @@ #include #include #include +#include #include "plpar_wrappers.h" -#include "ras.h" -#include "firmware.h" +#include "pseries.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) -- cgit v0.10.2 From 8feaeca23ab8f520e7af2a862fd6ea8e7bfd8854 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 8 Feb 2007 18:33:55 +1100 Subject: [POWERPC] Cleanup pseries smp initialisation code Move some extern declarations from setup.c into the new pseries.h. While we're at it, provide dummy implementations for !SMP, to avoid cluttering the C file with more #ifdefs. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h index 37618cb..36c7915 100644 --- a/arch/powerpc/platforms/pseries/pseries.h +++ b/arch/powerpc/platforms/pseries/pseries.h @@ -17,4 +17,12 @@ struct pt_regs; extern int pSeries_system_reset_exception(struct pt_regs *regs); extern int pSeries_machine_check_exception(struct pt_regs *regs); +#ifdef CONFIG_SMP +extern void smp_init_pseries_mpic(void); +extern void smp_init_pseries_xics(void); +#else +static inline smp_init_pseries_mpic(void) { }; +static inline smp_init_pseries_xics(void) { }; +#endif + #endif /* _PSERIES_PSERIES_H */ diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index a28264c..7698156 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -77,8 +77,6 @@ #endif /* move those away to a .h */ -extern void smp_init_pseries_mpic(void); -extern void smp_init_pseries_xics(void); extern void find_udbg_vterm(void); int fwnmi_active; /* TRUE if an FWNMI handler is present */ @@ -272,18 +270,14 @@ static void __init pseries_discover_pic(void) #ifdef CONFIG_KEXEC ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_mpic; #endif -#ifdef CONFIG_SMP smp_init_pseries_mpic(); -#endif return; } else if (strstr(typep, "ppc-xicp")) { ppc_md.init_IRQ = xics_init_IRQ; #ifdef CONFIG_KEXEC ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_xics; #endif -#ifdef CONFIG_SMP smp_init_pseries_xics(); -#endif return; } } diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 4408518..116305b 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -48,6 +48,7 @@ #include #include "plpar_wrappers.h" +#include "pseries.h" #ifdef DEBUG #include -- cgit v0.10.2 From dce623e0827e8d0ad60ce7f385c3394bf1b0bae0 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 8 Feb 2007 18:33:55 +1100 Subject: [POWERPC] Cleanup pseries kexec code Move all the pseries kexec code into one file, platforms/pseries/kexec.c Provide helpers for setting up ppc_md.kexec_cpu_down, so that we don't have to have #ifdef CONFIG_KEXEC in setup.c Move the initialisation of the ppc_md kexec callbacks into an init routine. This is well and truly early enough to cause no change in behaviour, we can't kexec until userspace has given us a kernel to kexec into. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index 69590fb..dc0583b 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_XICS) += xics.o obj-$(CONFIG_SCANLOG) += scanlog.o obj-$(CONFIG_EEH) += eeh.o eeh_cache.o eeh_driver.o eeh_event.o +obj-$(CONFIG_KEXEC) += kexec.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug-cpu.o diff --git a/arch/powerpc/platforms/pseries/kexec.c b/arch/powerpc/platforms/pseries/kexec.c new file mode 100644 index 0000000..af26856 --- /dev/null +++ b/arch/powerpc/platforms/pseries/kexec.c @@ -0,0 +1,72 @@ +/* + * Copyright 2006 Michael Ellerman, IBM Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include + +#include "pseries.h" +#include "xics.h" +#include "plpar_wrappers.h" + +static void pseries_kexec_cpu_down(int crash_shutdown, int secondary) +{ + /* Don't risk a hypervisor call if we're crashing */ + if (firmware_has_feature(FW_FEATURE_SPLPAR) && !crash_shutdown) { + unsigned long addr; + + addr = __pa(get_slb_shadow()); + if (unregister_slb_shadow(hard_smp_processor_id(), addr)) + printk("SLB shadow buffer deregistration of " + "cpu %u (hw_cpu_id %d) failed\n", + smp_processor_id(), + hard_smp_processor_id()); + + addr = __pa(get_lppaca()); + if (unregister_vpa(hard_smp_processor_id(), addr)) { + printk("VPA deregistration of cpu %u (hw_cpu_id %d) " + "failed\n", smp_processor_id(), + hard_smp_processor_id()); + } + } +} + +static void pseries_kexec_cpu_down_mpic(int crash_shutdown, int secondary) +{ + pseries_kexec_cpu_down(crash_shutdown, secondary); + mpic_teardown_this_cpu(secondary); +} + +void __init setup_kexec_cpu_down_mpic(void) +{ + ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_mpic; +} + +static void pseries_kexec_cpu_down_xics(int crash_shutdown, int secondary) +{ + pseries_kexec_cpu_down(crash_shutdown, secondary); + xics_teardown_cpu(secondary); +} + +void __init setup_kexec_cpu_down_xics(void) +{ + ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_xics; +} + +static int __init pseries_kexec_setup(void) +{ + ppc_md.machine_kexec = default_machine_kexec; + ppc_md.machine_kexec_prepare = default_machine_kexec_prepare; + ppc_md.machine_crash_shutdown = default_machine_crash_shutdown; + + return 0; +} +__initcall(pseries_kexec_setup); diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h index 36c7915..b43f139 100644 --- a/arch/powerpc/platforms/pseries/pseries.h +++ b/arch/powerpc/platforms/pseries/pseries.h @@ -25,4 +25,12 @@ static inline smp_init_pseries_mpic(void) { }; static inline smp_init_pseries_xics(void) { }; #endif +#ifdef CONFIG_KEXEC +extern void setup_kexec_cpu_down_xics(void); +extern void setup_kexec_cpu_down_mpic(void); +#else +static inline setup_kexec_cpu_down_xics(void) { }; +static inline setup_kexec_cpu_down_mpic(void) { }; +#endif + #endif /* _PSERIES_PSERIES_H */ diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 7698156..435a045 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -55,7 +55,6 @@ #include #include #include -#include #include #include #include "xics.h" @@ -219,42 +218,6 @@ static void pseries_lpar_enable_pmcs(void) get_lppaca()->pmcregs_in_use = 1; } -#ifdef CONFIG_KEXEC -static void pseries_kexec_cpu_down(int crash_shutdown, int secondary) -{ - /* Don't risk a hypervisor call if we're crashing */ - if (firmware_has_feature(FW_FEATURE_SPLPAR) && !crash_shutdown) { - unsigned long addr; - - addr = __pa(get_slb_shadow()); - if (unregister_slb_shadow(hard_smp_processor_id(), addr)) - printk("SLB shadow buffer deregistration of " - "cpu %u (hw_cpu_id %d) failed\n", - smp_processor_id(), - hard_smp_processor_id()); - - addr = __pa(get_lppaca()); - if (unregister_vpa(hard_smp_processor_id(), addr)) { - printk("VPA deregistration of cpu %u (hw_cpu_id %d) " - "failed\n", smp_processor_id(), - hard_smp_processor_id()); - } - } -} - -static void pseries_kexec_cpu_down_mpic(int crash_shutdown, int secondary) -{ - pseries_kexec_cpu_down(crash_shutdown, secondary); - mpic_teardown_this_cpu(secondary); -} - -static void pseries_kexec_cpu_down_xics(int crash_shutdown, int secondary) -{ - pseries_kexec_cpu_down(crash_shutdown, secondary); - xics_teardown_cpu(secondary); -} -#endif /* CONFIG_KEXEC */ - static void __init pseries_discover_pic(void) { struct device_node *np; @@ -267,16 +230,12 @@ static void __init pseries_discover_pic(void) pSeries_mpic_node = of_node_get(np); ppc_md.init_IRQ = pseries_mpic_init_IRQ; ppc_md.get_irq = mpic_get_irq; -#ifdef CONFIG_KEXEC - ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_mpic; -#endif + setup_kexec_cpu_down_mpic(); smp_init_pseries_mpic(); return; } else if (strstr(typep, "ppc-xicp")) { ppc_md.init_IRQ = xics_init_IRQ; -#ifdef CONFIG_KEXEC - ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_xics; -#endif + setup_kexec_cpu_down_xics(); smp_init_pseries_xics(); return; } @@ -548,9 +507,4 @@ define_machine(pseries) { .check_legacy_ioport = pSeries_check_legacy_ioport, .system_reset_exception = pSeries_system_reset_exception, .machine_check_exception = pSeries_machine_check_exception, -#ifdef CONFIG_KEXEC - .machine_kexec = default_machine_kexec, - .machine_kexec_prepare = default_machine_kexec_prepare, - .machine_crash_shutdown = default_machine_crash_shutdown, -#endif }; -- cgit v0.10.2 From 775aeff44774c6933d8f9c14e1f325d8acd03136 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 8 Feb 2007 18:34:04 +1100 Subject: [POWERPC] Move MPIC smp routines into mpic.c Move a couple of MPIC smp routines into mpic.c, they're inside an SMP block in mpic.c - so they're still only built for SMP. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 0e8beca..924d692 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -78,29 +78,6 @@ int smt_enabled_at_boot = 1; static void (*crash_ipi_function_ptr)(struct pt_regs *) = NULL; -#ifdef CONFIG_MPIC -int __init smp_mpic_probe(void) -{ - int nr_cpus; - - DBG("smp_mpic_probe()...\n"); - - nr_cpus = cpus_weight(cpu_possible_map); - - DBG("nr_cpus: %d\n", nr_cpus); - - if (nr_cpus > 1) - mpic_request_ipis(); - - return nr_cpus; -} - -void __devinit smp_mpic_setup_cpu(int cpu) -{ - mpic_setup_this_cpu(); -} -#endif /* CONFIG_MPIC */ - #ifdef CONFIG_PPC64 void __devinit smp_generic_kick_cpu(int nr) { diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index aa701cc..4e54a09 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -1395,4 +1395,25 @@ void smp_mpic_message_pass(int target, int msg) break; } } + +int __init smp_mpic_probe(void) +{ + int nr_cpus; + + DBG("smp_mpic_probe()...\n"); + + nr_cpus = cpus_weight(cpu_possible_map); + + DBG("nr_cpus: %d\n", nr_cpus); + + if (nr_cpus > 1) + mpic_request_ipis(); + + return nr_cpus; +} + +void __devinit smp_mpic_setup_cpu(int cpu) +{ + mpic_setup_this_cpu(); +} #endif /* CONFIG_SMP */ -- cgit v0.10.2 From 8d38a5b2fab1397d35ba1c92828a91b77ce9f865 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 13 Feb 2007 21:35:38 +0100 Subject: [POWERPC] Open Firmware serial port driver This can be used for serial ports that are connected to an OF platform bus but are not autodetected by the lecacy serial support. It will automatically take over devices that come from the legacy serial detection, which usually is only one device. In some cases, rtas may be set up to use the serial port in the firmware, which allows easier debugging before probing the serial ports. In this case, the "used-by-rtas" property must be set by the firmware. This patch also adds code to the legacy serial driver to check for this. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 89f46f3..325f490 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -124,6 +124,10 @@ static int __init add_legacy_soc_port(struct device_node *np, if (get_property(np, "clock-frequency", NULL) == NULL) return -1; + /* if rtas uses this device, don't try to use it as well */ + if (get_property(np, "used-by-rtas", NULL) != NULL) + return -1; + /* Get the address */ addrp = of_get_address(soc_dev, 0, NULL, NULL); if (addrp == NULL) @@ -334,6 +338,17 @@ void __init find_legacy_serial_ports(void) of_node_put(tsi); } + /* First fill our array with opb bus ports */ + for (np = NULL; (np = of_find_compatible_node(np, "serial", "ns16750")) != NULL;) { + struct device_node *opb = of_get_parent(np); + if (opb && !strcmp(opb->type, "opb")) { + index = add_legacy_soc_port(np, np); + if (index >= 0 && np == stdout) + legacy_serial_console = index; + } + of_node_put(opb); + } + #ifdef CONFIG_PCI /* Next, try to locate PCI ports */ for (np = NULL; (np = of_find_all_nodes(np));) { diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 5cc6b91..d0edbaa 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -999,4 +999,14 @@ config SERIAL_NETX_CONSOLE If you have enabled the serial port on the Motorola IMX CPU you can make it the console by answering Y to this option. +config SERIAL_OF_PLATFORM + tristate "Serial port on Open Firmware platform bus" + depends on PPC_OF + depends on SERIAL_8250 + help + If you have a PowerPC based system that has serial ports + on a platform specific bus, you should enable this option. + Currently, only 8250 compatible ports are supported, but + others can easily be added. + endmenu diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index df3632c..f3f8258 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -58,3 +58,4 @@ obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o obj-$(CONFIG_SERIAL_NETX) += netx-serial.o +obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c new file mode 100644 index 0000000..09b0b73 --- /dev/null +++ b/drivers/serial/of_serial.c @@ -0,0 +1,143 @@ +/* + * Serial Port driver for Open Firmware platform devices + * + * Copyright (C) 2006 Arnd Bergmann , IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ +#include +#include +#include +#include + +#include +#include + +/* + * Fill a struct uart_port for a given device node + */ +static int __devinit of_platform_serial_setup(struct of_device *ofdev, + int type, struct uart_port *port) +{ + struct resource resource; + struct device_node *np = ofdev->node; + const unsigned int *clk, *spd; + int ret; + + memset(port, 0, sizeof *port); + spd = get_property(np, "current-speed", NULL); + clk = get_property(np, "clock-frequency", NULL); + if (!clk) { + dev_warn(&ofdev->dev, "no clock-frequency property set\n"); + return -ENODEV; + } + + ret = of_address_to_resource(np, 0, &resource); + if (ret) { + dev_warn(&ofdev->dev, "invalid address\n"); + return ret; + } + + spin_lock_init(&port->lock); + port->mapbase = resource.start; + port->irq = irq_of_parse_and_map(np, 0); + port->iotype = UPIO_MEM; + port->type = type; + port->uartclk = *clk; + port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP; + port->dev = &ofdev->dev; + port->custom_divisor = *clk / (16 * (*spd)); + + return 0; +} + +/* + * Try to register a serial port + */ +static int __devinit of_platform_serial_probe(struct of_device *ofdev, + const struct of_device_id *id) +{ + struct uart_port port; + int port_type; + int ret; + + if (of_find_property(ofdev->node, "used-by-rtas", NULL)) + return -EBUSY; + + port_type = (unsigned long)id->data; + ret = of_platform_serial_setup(ofdev, port_type, &port); + if (ret) + goto out; + + switch (port_type) { + case PORT_UNKNOWN: + dev_info(&ofdev->dev, "Unknown serial port found, " + "attempting to use 8250 driver\n"); + /* fallthrough */ + case PORT_8250 ... PORT_MAX_8250: + ret = serial8250_register_port(&port); + break; + default: + /* need to add code for these */ + ret = -ENODEV; + break; + } + if (ret < 0) + goto out; + + ofdev->dev.driver_data = (void *)(unsigned long)ret; + return 0; +out: + irq_dispose_mapping(port.irq); + return ret; +} + +/* + * Release a line + */ +static int of_platform_serial_remove(struct of_device *ofdev) +{ + int line = (unsigned long)ofdev->dev.driver_data; + serial8250_unregister_port(line); + return 0; +} + +/* + * A few common types, add more as needed. + */ +static struct of_device_id __devinitdata of_platform_serial_table[] = { + { .type = "serial", .compatible = "ns8250", .data = (void *)PORT_8250, }, + { .type = "serial", .compatible = "ns16450", .data = (void *)PORT_16450, }, + { .type = "serial", .compatible = "ns16550", .data = (void *)PORT_16550, }, + { .type = "serial", .compatible = "ns16750", .data = (void *)PORT_16750, }, + { .type = "serial", .data = (void *)PORT_UNKNOWN, }, + { /* end of list */ }, +}; + +static struct of_platform_driver __devinitdata of_platform_serial_driver = { + .owner = THIS_MODULE, + .name = "of_serial", + .probe = of_platform_serial_probe, + .remove = of_platform_serial_remove, + .match_table = of_platform_serial_table, +}; + +static int __init of_platform_serial_init(void) +{ + return of_register_platform_driver(&of_platform_serial_driver); +} +module_init(of_platform_serial_init); + +static void __exit of_platform_serial_exit(void) +{ + return of_unregister_platform_driver(&of_platform_serial_driver); +}; +module_exit(of_platform_serial_exit); + +MODULE_AUTHOR("Arnd Bergmann "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Serial Port driver for Open Firmware platform devices"); -- cgit v0.10.2 From 719c91ccadd3ed26570dbb29d54166914832eee9 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Tue, 13 Feb 2007 15:54:22 +1100 Subject: [POWERPC] Use udbg_early_init() on ppc32 udbg_early_init() is a function used on 64 bit systems, which initializes whichever early udbg backend is configured. This function is not called on 32-bit, however if btext early debug is enabled it does have an explicit, inline, #ifdef-ed assignment performing analagous initialization. This patch makes things more uniform by folding the btext initialization as an option into udbg_early_init() and calling that from the 32-bit setup path. Signed-off-by: David Gibson Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c index 93f21aa..3678997 100644 --- a/arch/powerpc/kernel/btext.c +++ b/arch/powerpc/kernel/btext.c @@ -18,6 +18,7 @@ #include #include #include +#include #define NO_SCROLL @@ -912,3 +913,11 @@ static unsigned char vga_font[cmapsz] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, }; + +void __init udbg_init_btext(void) +{ + /* If btext is enabled, we might have a BAT setup for early display, + * thus we do enable some very basic udbg output + */ + udbg_putc = btext_drawchar; +} diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 6a19fa4..44a6a3c 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -116,12 +116,8 @@ unsigned long __init early_init(unsigned long dt_ptr) */ void __init machine_init(unsigned long dt_ptr, unsigned long phys) { - /* If btext is enabled, we might have a BAT setup for early display, - * thus we do enable some very basic udbg output - */ -#ifdef CONFIG_BOOTX_TEXT - udbg_putc = btext_drawchar; -#endif + /* Enable early debugging if any specified (see udbg.h) */ + udbg_early_init(); /* Do some early initialization based on the flat device tree */ early_init_devtree(__va(dt_ptr)); diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index 194a93e..7e09718 100644 --- a/arch/powerpc/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -49,6 +49,8 @@ void __init udbg_early_init(void) udbg_init_debug_beat(); #elif defined(CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE) udbg_init_pas_realmode(); +#elif defined(CONFIG_BOOTX_TEXT) + udbg_init_btext(); #endif } diff --git a/include/asm-powerpc/udbg.h b/include/asm-powerpc/udbg.h index 4cbc313..d03d855 100644 --- a/include/asm-powerpc/udbg.h +++ b/include/asm-powerpc/udbg.h @@ -46,6 +46,7 @@ extern void __init udbg_init_iseries(void); extern void __init udbg_init_rtas_panel(void); extern void __init udbg_init_rtas_console(void); extern void __init udbg_init_debug_beat(void); +extern void __init udbg_init_btext(void); #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_UDBG_H */ -- cgit v0.10.2 From b6f45a4b071d77777d70e097d429273aeedff717 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=B3=20Bilski?= Date: Mon, 12 Feb 2007 22:19:12 +0100 Subject: [CPUFREQ] EPS - Correct 2nd brand test Solution for small, but nasty bug: access beyond end of f_table for C7 brand. Signed-off-by: Rafal Bilski Signed-off-by: Dave Jones diff --git a/arch/i386/kernel/cpu/cpufreq/e_powersaver.c b/arch/i386/kernel/cpu/cpufreq/e_powersaver.c index 3243725..f43d98e 100644 --- a/arch/i386/kernel/cpu/cpufreq/e_powersaver.c +++ b/arch/i386/kernel/cpu/cpufreq/e_powersaver.c @@ -234,7 +234,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy) /* Fill frequency and MSR value table */ f_table = ¢aur->freq_table[0]; - if (brand == EPS_BRAND_EDEN) { + if (brand != EPS_BRAND_C7M) { f_table[0].frequency = fsb * min_multiplier; f_table[0].index = (min_multiplier << 8) | min_voltage; f_table[1].frequency = fsb * max_multiplier; -- cgit v0.10.2 From 8af18971584d1e05770560206cfdfd1d6ba8a17f Mon Sep 17 00:00:00 2001 From: Steve French Date: Wed, 14 Feb 2007 04:42:51 +0000 Subject: [CIFS] on reconnect to Samba - reset the unix capabilities After temporary server or network failure and reconneciton, we were not resending the unix capabilities via SetFSInfo - which confused Samba posix byte range locking code. Discovered by jra Signed-off-by: Steve French diff --git a/fs/Kconfig b/fs/Kconfig index 8cd2417..d57f363 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -1871,20 +1871,14 @@ config CIFS file servers such as Windows 2000 (including Windows 2003, NT 4 and Windows XP) as well by Samba (which provides excellent CIFS server support for Linux and many other operating systems). Limited - support for Windows ME and similar servers is provided as well. - You must use the smbfs client filesystem to access older SMB servers - such as OS/2 and DOS. + support for OS/2 and Windows ME and similar servers is provided as well. The intent of the cifs module is to provide an advanced - network file system client for mounting to CIFS compliant servers, + network file system client for mounting to CIFS compliant servers, including support for dfs (hierarchical name space), secure per-user session establishment, safe distributed caching (oplock), optional - packet signing, Unicode and other internationalization improvements, - and optional Winbind (nsswitch) integration. You do not need to enable - cifs if running only a (Samba) server. It is possible to enable both - smbfs and cifs (e.g. if you are using CIFS for accessing Windows 2003 - and Samba 3 servers, and smbfs for accessing old servers). If you need - to mount to Samba or Windows from this machine, say Y. + packet signing, Unicode and other internationalization improvements. + If you need to mount to Samba or Windows from this machine, say Y. config CIFS_STATS bool "CIFS statistics" @@ -1977,14 +1971,13 @@ config CIFS_EXPERIMENTAL depends on CIFS && EXPERIMENTAL help Enables cifs features under testing. These features are - experimental and currently include support for writepages - (multipage writebehind performance improvements) and directory - change notification ie fcntl(F_DNOTIFY) as well as some security - improvements. Some also depend on setting at runtime the - pseudo-file /proc/fs/cifs/Experimental (which is disabled by - default). See the file fs/cifs/README for more details. - - If unsure, say N. + experimental and currently include DFS support and directory + change notification ie fcntl(F_DNOTIFY), as well as the upcall + mechanism which will be used for Kerberos session negotiation + and uid remapping. Some of these features also may depend on + setting a value of 1 to the pseudo-file /proc/fs/cifs/Experimental + (which is disabled by default). See the file fs/cifs/README + for more details. If unsure, say N. config CIFS_UPCALL bool "Kerberos/SPNEGO advanced session setup (EXPERIMENTAL)" diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES index a1fb03f..5fe1359 100644 --- a/fs/cifs/CHANGES +++ b/fs/cifs/CHANGES @@ -4,7 +4,12 @@ Fix oops in list_del during mount caused by unaligned string. Fix file corruption which could occur on some large file copies caused by writepages page i/o completion bug. Seek to SEEK_END forces check for update of file size for non-cached -files. +files. Allow file size to be updated on remote extend of locally open, +non-cached file. Fix reconnect to newer Samba servers (or other servers +which support the CIFS Unix/POSIX extensions) so that we again tell the +server the Unix/POSIX cifs capabilities which we support (SetFSInfo). +Add experimental support for new POSIX Open/Mkdir (which returns +stat information on the open, and allows setting the mode). Version 1.46 ------------ diff --git a/fs/cifs/TODO b/fs/cifs/TODO index fc34c74..6837294 100644 --- a/fs/cifs/TODO +++ b/fs/cifs/TODO @@ -128,3 +128,11 @@ negotiated size) and send larger write sizes to modern servers. 4) More exhaustively test against less common servers. More testing against Windows 9x, Windows ME servers. + +DOS attrs - returned as pseudo-xattr in Samba format (check VFAT and NTFS for this too) + +mount check for unmatched uids - and uid override + +Add mount option for Linux extension disable per mount, and partial disable per mount (uid off, symlink/fifo/mknod on but what about posix acls?) + +Free threads at umount --force that are stuck on the sesSem diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h index 8aa66dc..e36b0d4 100644 --- a/fs/cifs/cifsfs.h +++ b/fs/cifs/cifsfs.h @@ -100,5 +100,5 @@ extern ssize_t cifs_getxattr(struct dentry *, const char *, void *, size_t); extern ssize_t cifs_listxattr(struct dentry *, char *, size_t); extern int cifs_ioctl (struct inode * inode, struct file * filep, unsigned int command, unsigned long arg); -#define CIFS_VERSION "1.47" +#define CIFS_VERSION "1.48" #endif /* _CIFSFS_H */ diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h index 529a000..7d95054 100644 --- a/fs/cifs/cifspdu.h +++ b/fs/cifs/cifspdu.h @@ -2108,7 +2108,7 @@ typedef struct { typedef struct { /* reply varies based on requested level */ -} __atribute__((packed)) OPEN_PSX_RSP; /* level 0x209 SetPathInfo data */ +} __attribute__((packed)) OPEN_PSX_RSP; /* level 0x209 SetPathInfo data */ struct file_internal_info { diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 1108f17..6148b82 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -23,6 +23,7 @@ #include struct statfs; +struct smb_vol; /* ***************************************************************** @@ -147,6 +148,8 @@ extern int get_dfs_path(int xid, struct cifsSesInfo *pSesInfo, unsigned int *pnum_referrals, unsigned char ** preferrals, int remap); +extern void reset_cifs_unix_caps(int xid, struct cifsTconInfo *tcon, + struct super_block * sb, struct smb_vol * vol); extern int CIFSSMBQFSInfo(const int xid, struct cifsTconInfo *tcon, struct kstatfs *FSData); extern int SMBOldQFSInfo(const int xid, struct cifsTconInfo *tcon, diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 472e33e..b8e9147 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -158,9 +158,15 @@ small_smb_init(int smb_command, int wct, struct cifsTconInfo *tcon, nls_codepage); if(!rc && (tcon->tidStatus == CifsNeedReconnect)) { mark_open_files_invalid(tcon); - rc = CIFSTCon(0, tcon->ses, tcon->treeName, tcon - , nls_codepage); + rc = CIFSTCon(0, tcon->ses, tcon->treeName, + tcon, nls_codepage); up(&tcon->ses->sesSem); + /* tell server which Unix caps we support */ + if (tcon->ses->capabilities & CAP_UNIX) + reset_cifs_unix_caps(0 /* no xid */, + tcon, + NULL /* we do not know sb */, + NULL /* no vol info */); /* BB FIXME add code to check if wsize needs update due to negotiated smb buffer size shrinking */ @@ -298,6 +304,12 @@ smb_init(int smb_command, int wct, struct cifsTconInfo *tcon, rc = CIFSTCon(0, tcon->ses, tcon->treeName, tcon, nls_codepage); up(&tcon->ses->sesSem); + /* tell server which Unix caps we support */ + if (tcon->ses->capabilities & CAP_UNIX) + reset_cifs_unix_caps(0 /* no xid */, + tcon, + NULL /* do not know sb */, + NULL /* no vol info */); /* BB FIXME add code to check if wsize needs update due to negotiated smb buffer size shrinking */ diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 2caca06..20ba7dc 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1613,6 +1613,76 @@ ipv6_connect(struct sockaddr_in6 *psin_server, struct socket **csocket) return rc; } +void reset_cifs_unix_caps(int xid, struct cifsTconInfo * tcon, + struct super_block * sb, struct smb_vol * vol_info) +{ + /* if we are reconnecting then should we check to see if + * any requested capabilities changed locally e.g. via + * remount but we can not do much about it here + * if they have (even if we could detect it by the following) + * Perhaps we could add a backpointer to array of sb from tcon + * or if we change to make all sb to same share the same + * sb as NFS - then we only have one backpointer to sb. + * What if we wanted to mount the server share twice once with + * and once without posixacls or posix paths? */ + __u64 saved_cap = le64_to_cpu(tcon->fsUnixInfo.Capability); + + + if(!CIFSSMBQFSUnixInfo(xid, tcon)) { + __u64 cap = le64_to_cpu(tcon->fsUnixInfo.Capability); + + /* check for reconnect case in which we do not + want to change the mount behavior if we can avoid it */ + if(vol_info == NULL) { + /* turn off POSIX ACL and PATHNAMES if not set + originally at mount time */ + if ((saved_cap & CIFS_UNIX_POSIX_ACL_CAP) == 0) + cap &= ~CIFS_UNIX_POSIX_ACL_CAP; + if ((saved_cap & CIFS_UNIX_POSIX_PATHNAMES_CAP) == 0) + cap &= ~CIFS_UNIX_POSIX_PATHNAMES_CAP; + + + + + } + + cap &= CIFS_UNIX_CAP_MASK; + if(vol_info && vol_info->no_psx_acl) + cap &= ~CIFS_UNIX_POSIX_ACL_CAP; + else if(CIFS_UNIX_POSIX_ACL_CAP & cap) { + cFYI(1,("negotiated posix acl support")); + if(sb) + sb->s_flags |= MS_POSIXACL; + } + + if(vol_info && vol_info->posix_paths == 0) + cap &= ~CIFS_UNIX_POSIX_PATHNAMES_CAP; + else if(cap & CIFS_UNIX_POSIX_PATHNAMES_CAP) { + cFYI(1,("negotiate posix pathnames")); + if(sb) + CIFS_SB(sb)->mnt_cifs_flags |= + CIFS_MOUNT_POSIX_PATHS; + } + + cFYI(1,("Negotiate caps 0x%x",(int)cap)); +#ifdef CONFIG_CIFS_DEBUG2 + if(cap & CIFS_UNIX_FCNTL_CAP) + cFYI(1,("FCNTL cap")); + if(cap & CIFS_UNIX_EXTATTR_CAP) + cFYI(1,("EXTATTR cap")); + if(cap & CIFS_UNIX_POSIX_PATHNAMES_CAP) + cFYI(1,("POSIX path cap")); + if(cap & CIFS_UNIX_XATTR_CAP) + cFYI(1,("XATTR cap")); + if(cap & CIFS_UNIX_POSIX_ACL_CAP) + cFYI(1,("POSIX ACL cap")); +#endif /* CIFS_DEBUG2 */ + if (CIFSSMBSetFSUnixInfo(xid, tcon, cap)) { + cFYI(1,("setting capabilities failed")); + } + } +} + int cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, char *mount_data, const char *devname) @@ -1928,20 +1998,25 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, if (tcon == NULL) rc = -ENOMEM; else { - /* check for null share name ie connect to dfs root */ + /* check for null share name ie connecting to + * dfs root */ - /* BB check if this works for exactly length three strings */ + /* BB check if this works for exactly length + * three strings */ if ((strchr(volume_info.UNC + 3, '\\') == NULL) && (strchr(volume_info.UNC + 3, '/') == NULL)) { rc = connect_to_dfs_path(xid, pSesInfo, - "", cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR); + "", cifs_sb->local_nls, + cifs_sb->mnt_cifs_flags & + CIFS_MOUNT_MAP_SPECIAL_CHR); kfree(volume_info.UNC); FreeXid(xid); return -ENODEV; } else { + /* BB Do we need to wrap sesSem around + * this TCon call and Unix SetFS as + * we do on SessSetup and reconnect? */ rc = CIFSTCon(xid, pSesInfo, volume_info.UNC, tcon, cifs_sb->local_nls); @@ -1962,6 +2037,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, sb->s_maxbytes = (u64) 1 << 31; /* 2 GB */ } + /* BB FIXME fix time_gran to be larger for LANMAN sessions */ sb->s_time_gran = 100; /* on error free sesinfo and tcon struct if needed */ @@ -2006,45 +2082,11 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, /* do not care if following two calls succeed - informational */ CIFSSMBQFSDeviceInfo(xid, tcon); CIFSSMBQFSAttributeInfo(xid, tcon); - - if (tcon->ses->capabilities & CAP_UNIX) { - if(!CIFSSMBQFSUnixInfo(xid, tcon)) { - __u64 cap = - le64_to_cpu(tcon->fsUnixInfo.Capability); - cap &= CIFS_UNIX_CAP_MASK; - if(volume_info.no_psx_acl) - cap &= ~CIFS_UNIX_POSIX_ACL_CAP; - else if(CIFS_UNIX_POSIX_ACL_CAP & cap) { - cFYI(1,("negotiated posix acl support")); - sb->s_flags |= MS_POSIXACL; - } - - if(volume_info.posix_paths == 0) - cap &= ~CIFS_UNIX_POSIX_PATHNAMES_CAP; - else if(cap & CIFS_UNIX_POSIX_PATHNAMES_CAP) { - cFYI(1,("negotiate posix pathnames")); - cifs_sb->mnt_cifs_flags |= - CIFS_MOUNT_POSIX_PATHS; - } - - cFYI(1,("Negotiate caps 0x%x",(int)cap)); -#ifdef CONFIG_CIFS_DEBUG2 - if(cap & CIFS_UNIX_FCNTL_CAP) - cFYI(1,("FCNTL cap")); - if(cap & CIFS_UNIX_EXTATTR_CAP) - cFYI(1,("EXTATTR cap")); - if(cap & CIFS_UNIX_POSIX_PATHNAMES_CAP) - cFYI(1,("POSIX path cap")); - if(cap & CIFS_UNIX_XATTR_CAP) - cFYI(1,("XATTR cap")); - if(cap & CIFS_UNIX_POSIX_ACL_CAP) - cFYI(1,("POSIX ACL cap")); -#endif /* CIFS_DEBUG2 */ - if (CIFSSMBSetFSUnixInfo(xid, tcon, cap)) { - cFYI(1,("setting capabilities failed")); - } - } - } + + /* tell server which Unix caps we support */ + if (tcon->ses->capabilities & CAP_UNIX) + reset_cifs_unix_caps(xid, tcon, sb, &volume_info); + if (!(tcon->ses->capabilities & CAP_LARGE_WRITE_X)) cifs_sb->wsize = min(cifs_sb->wsize, (tcon->ses->server->maxBuf - -- cgit v0.10.2 From db2e1fa3f0eefbbe04e90d6e4d290ee176b28248 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 14 Feb 2007 14:13:10 +0900 Subject: sh: Revert TLB miss fast-path changes that broke PTEA parts. This ended up causing problems for older parts (particularly ones using PTEA). Revert this for now, it can be added back in once it's had some more testing. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index 1c52035..c19205b 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -13,10 +13,8 @@ #include #include #include -#include #include -#include -#include +#include ! NOTE: ! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address @@ -138,14 +136,29 @@ ENTRY(tlb_protection_violation_store) call_dpf: mov.l 1f, r0 - mov.l @r0, r6 ! address + mov r5, r8 + mov.l @r0, r6 + mov r6, r9 + mov.l 2f, r0 + sts pr, r10 + jsr @r0 + mov r15, r4 + ! + tst r0, r0 + bf/s 0f + lds r10, pr + rts + nop +0: sti mov.l 3f, r0 - + mov r9, r6 + mov r8, r5 jmp @r0 - mov r15, r4 ! regs + mov r15, r4 .align 2 1: .long MMU_TEA +2: .long __do_page_fault 3: .long do_page_fault .align 2 @@ -332,171 +345,9 @@ general_exception: ! ! -/* gas doesn't flag impossible values for mov #immediate as an error */ -#if (_PAGE_PRESENT >> 2) > 0x7f -#error cannot load PAGE_PRESENT as an immediate -#endif -#if _PAGE_DIRTY > 0x7f -#error cannot load PAGE_DIRTY as an immediate -#endif -#if (_PAGE_PRESENT << 2) != _PAGE_ACCESSED -#error cannot derive PAGE_ACCESSED from PAGE_PRESENT -#endif - -#if defined(CONFIG_CPU_SH4) -#define ldmmupteh(r) mov.l 8f, r -#else -#define ldmmupteh(r) mov #MMU_PTEH, r -#endif - .balign 1024,0,1024 tlb_miss: -#ifdef COUNT_EXCEPTIONS - ! Increment the counts - mov.l 9f, k1 - mov.l @k1, k2 - add #1, k2 - mov.l k2, @k1 -#endif - - ! k0 scratch - ! k1 pgd and pte pointers - ! k2 faulting address - ! k3 pgd and pte index masks - ! k4 shift - - ! Load up the pgd entry (k1) - - ldmmupteh(k0) ! 9 LS (latency=2) MMU_PTEH - - mov.w 4f, k3 ! 8 LS (latency=2) (PTRS_PER_PGD-1) << 2 - mov #-(PGDIR_SHIFT-2), k4 ! 6 EX - - mov.l @(MMU_TEA-MMU_PTEH,k0), k2 ! 18 LS (latency=2) - - mov.l @(MMU_TTB-MMU_PTEH,k0), k1 ! 18 LS (latency=2) - - mov k2, k0 ! 5 MT (latency=0) - shld k4, k0 ! 99 EX - - and k3, k0 ! 78 EX - - mov.l @(k0, k1), k1 ! 21 LS (latency=2) - mov #-(PAGE_SHIFT-2), k4 ! 6 EX - - ! Load up the pte entry (k2) - - mov k2, k0 ! 5 MT (latency=0) - shld k4, k0 ! 99 EX - - tst k1, k1 ! 86 MT - - bt 20f ! 110 BR - - mov.w 3f, k3 ! 8 LS (latency=2) (PTRS_PER_PTE-1) << 2 - and k3, k0 ! 78 EX - mov.w 5f, k4 ! 8 LS (latency=2) _PAGE_PRESENT - - mov.l @(k0, k1), k2 ! 21 LS (latency=2) - add k0, k1 ! 49 EX - -#ifdef CONFIG_CPU_HAS_PTEA - ! Test the entry for present and _PAGE_ACCESSED - - mov #-28, k3 ! 6 EX - mov k2, k0 ! 5 MT (latency=0) - - tst k4, k2 ! 68 MT - shld k3, k0 ! 99 EX - - bt 20f ! 110 BR - - ! Set PTEA register - ! MMU_PTEA = ((pteval >> 28) & 0xe) | (pteval & 0x1) - ! - ! k0=pte>>28, k1=pte*, k2=pte, k3=, k4=_PAGE_PRESENT - - and #0xe, k0 ! 79 EX - - mov k0, k3 ! 5 MT (latency=0) - mov k2, k0 ! 5 MT (latency=0) - - and #1, k0 ! 79 EX - - or k0, k3 ! 82 EX - - ldmmupteh(k0) ! 9 LS (latency=2) - shll2 k4 ! 101 EX _PAGE_ACCESSED - - tst k4, k2 ! 68 MT - - mov.l k3, @(MMU_PTEA-MMU_PTEH,k0) ! 27 LS - - mov.l 7f, k3 ! 9 LS (latency=2) _PAGE_FLAGS_HARDWARE_MASK - - ! k0=MMU_PTEH, k1=pte*, k2=pte, k3=_PAGE_FLAGS_HARDWARE, k4=_PAGE_ACCESSED -#else - - ! Test the entry for present and _PAGE_ACCESSED - - mov.l 7f, k3 ! 9 LS (latency=2) _PAGE_FLAGS_HARDWARE_MASK - tst k4, k2 ! 68 MT - - shll2 k4 ! 101 EX _PAGE_ACCESSED - ldmmupteh(k0) ! 9 LS (latency=2) - - bt 20f ! 110 BR - tst k4, k2 ! 68 MT - - ! k0=MMU_PTEH, k1=pte*, k2=pte, k3=_PAGE_FLAGS_HARDWARE, k4=_PAGE_ACCESSED - -#endif - - ! Set up the entry - - and k2, k3 ! 78 EX - bt/s 10f ! 108 BR - - mov.l k3, @(MMU_PTEL-MMU_PTEH,k0) ! 27 LS - - ldtlb ! 128 CO - - ! At least one instruction between ldtlb and rte - nop ! 119 NOP - - rte ! 126 CO - - nop ! 119 NOP - - -10: or k4, k2 ! 82 EX - - ldtlb ! 128 CO - - ! At least one instruction between ldtlb and rte - mov.l k2, @k1 ! 27 LS - - rte ! 126 CO - - ! Note we cannot execute mov here, because it is executed after - ! restoring SSR, so would be executed in user space. - nop ! 119 NOP - - - .align 5 - ! Once cache line if possible... -1: .long swapper_pg_dir -3: .short (PTRS_PER_PTE-1) << 2 -4: .short (PTRS_PER_PGD-1) << 2 -5: .long _PAGE_PRESENT -7: .long _PAGE_FLAGS_HARDWARE_MASK -8: .long MMU_PTEH -#ifdef COUNT_EXCEPTIONS -9: .long exception_count_miss -#endif - - ! Either pgd or pte not present -20: mov.l 1f, k2 + mov.l 1f, k2 mov.l 4f, k3 bra handle_exception mov.l @k2, k2 @@ -647,15 +498,6 @@ skip_save: bf interrupt_exception shlr2 r8 shlr r8 - -#ifdef COUNT_EXCEPTIONS - mov.l 5f, r9 - add r8, r9 - mov.l @r9, r10 - add #1, r10 - mov.l r10, @r9 -#endif - mov.l 4f, r9 add r8, r9 mov.l @r9, r9 @@ -669,9 +511,6 @@ skip_save: 2: .long 0x000080f0 ! FD=1, IMASK=15 3: .long 0xcfffffff ! RB=0, BL=0 4: .long exception_handling_table -#ifdef COUNT_EXCEPTIONS -5: .long exception_count_table -#endif interrupt_exception: mov.l 1f, r9 diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c index 716ebf5..fa5d7f0 100644 --- a/arch/sh/mm/fault.c +++ b/arch/sh/mm/fault.c @@ -17,6 +17,7 @@ #include #include #include +#include #include extern void die(const char *,struct pt_regs *,long); @@ -224,3 +225,89 @@ do_sigbus: if (!user_mode(regs)) goto no_context; } + +#ifdef CONFIG_SH_STORE_QUEUES +/* + * This is a special case for the SH-4 store queues, as pages for this + * space still need to be faulted in before it's possible to flush the + * store queue cache for writeout to the remapped region. + */ +#define P3_ADDR_MAX (P4SEG_STORE_QUE + 0x04000000) +#else +#define P3_ADDR_MAX P4SEG +#endif + +/* + * Called with interrupts disabled. + */ +asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs, + unsigned long writeaccess, + unsigned long address) +{ + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + pte_t *pte; + pte_t entry; + struct mm_struct *mm = current->mm; + spinlock_t *ptl; + int ret = 1; + +#ifdef CONFIG_SH_KGDB + if (kgdb_nofault && kgdb_bus_err_hook) + kgdb_bus_err_hook(); +#endif + + /* + * We don't take page faults for P1, P2, and parts of P4, these + * are always mapped, whether it be due to legacy behaviour in + * 29-bit mode, or due to PMB configuration in 32-bit mode. + */ + if (address >= P3SEG && address < P3_ADDR_MAX) { + pgd = pgd_offset_k(address); + mm = NULL; + } else { + if (unlikely(address >= TASK_SIZE || !mm)) + return 1; + + pgd = pgd_offset(mm, address); + } + + pud = pud_offset(pgd, address); + if (pud_none_or_clear_bad(pud)) + return 1; + pmd = pmd_offset(pud, address); + if (pmd_none_or_clear_bad(pmd)) + return 1; + + if (mm) + pte = pte_offset_map_lock(mm, pmd, address, &ptl); + else + pte = pte_offset_kernel(pmd, address); + + entry = *pte; + if (unlikely(pte_none(entry) || pte_not_present(entry))) + goto unlock; + if (unlikely(writeaccess && !pte_write(entry))) + goto unlock; + + if (writeaccess) + entry = pte_mkdirty(entry); + entry = pte_mkyoung(entry); + +#ifdef CONFIG_CPU_SH4 + /* + * ITLB is not affected by "ldtlb" instruction. + * So, we need to flush the entry by ourselves. + */ + local_flush_tlb_one(get_asid(), address & PAGE_MASK); +#endif + + set_pte(pte, entry); + update_mmu_cache(NULL, address, entry); + ret = 0; +unlock: + if (mm) + pte_unmap_unlock(pte, ptl); + return ret; +} diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h index 3721a44..9214c01 100644 --- a/include/asm-sh/pgtable.h +++ b/include/asm-sh/pgtable.h @@ -43,7 +43,7 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; /* PGD bits */ #define PGDIR_SHIFT (PTE_SHIFT + PTE_BITS) #define PGDIR_BITS (32 - PGDIR_SHIFT) -#define PGDIR_SIZE (1 << PGDIR_SHIFT) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) #define PGDIR_MASK (~(PGDIR_SIZE-1)) /* Entries per level */ -- cgit v0.10.2 From 71074d3a2c70aa8a213222fef5014bfd9b3daf1f Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 14 Feb 2007 14:49:04 +0900 Subject: sh: Fixup r7780rp pata_platform for devres conversion. Tidy up the R7780RP I/O mapping routines and switch the pata_platform resources to IORESOURCE_MEM types, killing off the useless port->addr conversion. This fixes up R7780RP to boot after the recent devres conversion. Signed-off-by: Paul Mundt diff --git a/arch/sh/boards/renesas/r7780rp/io.c b/arch/sh/boards/renesas/r7780rp/io.c index 369cbf1..f74d2ff 100644 --- a/arch/sh/boards/renesas/r7780rp/io.c +++ b/arch/sh/boards/renesas/r7780rp/io.c @@ -11,22 +11,9 @@ #include #include #include +#include #include #include -#include - -static inline unsigned long port2adr(unsigned int port) -{ - if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) - if (port == 0x3f6) - return (PA_AREA5_IO + 0x80c); - else - return (PA_AREA5_IO + 0x1000 + ((port-0x1f0) << 1)); - else - maybebadio((unsigned long)port); - - return port; -} static inline unsigned long port88796l(unsigned int port, int flag) { @@ -40,18 +27,6 @@ static inline unsigned long port88796l(unsigned int port, int flag) return addr; } -/* The 7780 R7780RP-1 seems to have everything hooked */ -/* up pretty normally (nothing on high-bytes only...) so this */ -/* shouldn't be needed */ -static inline int shifted_port(unsigned long port) -{ - /* For IDE registers, value is not shifted */ - if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) - return 0; - else - return 1; -} - #if defined(CONFIG_NE2000) || defined(CONFIG_NE2000_MODULE) #define CHECK_AX88796L_PORT(port) \ ((port >= AX88796L_IO_BASE) && (port < (AX88796L_IO_BASE+0x20))) @@ -70,12 +45,10 @@ u8 r7780rp_inb(unsigned long port) { if (CHECK_AX88796L_PORT(port)) return ctrl_inw(port88796l(port, 0)) & 0xff; - else if (PXSEG(port)) - return ctrl_inb(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + else if (is_pci_ioaddr(port)) return ctrl_inb(pci_ioaddr(port)); - return ctrl_inw(port2adr(port)) & 0xff; + return ctrl_inw(port) & 0xff; } u8 r7780rp_inb_p(unsigned long port) @@ -84,12 +57,10 @@ u8 r7780rp_inb_p(unsigned long port) if (CHECK_AX88796L_PORT(port)) v = ctrl_inw(port88796l(port, 0)) & 0xff; - else if (PXSEG(port)) - v = ctrl_inb(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + else if (is_pci_ioaddr(port)) v = ctrl_inb(pci_ioaddr(port)); else - v = ctrl_inw(port2adr(port)) & 0xff; + v = ctrl_inw(port) & 0xff; ctrl_delay(); @@ -98,80 +69,56 @@ u8 r7780rp_inb_p(unsigned long port) u16 r7780rp_inw(unsigned long port) { - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - return ctrl_inw(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + if (is_pci_ioaddr(port)) return ctrl_inw(pci_ioaddr(port)); - else - maybebadio(port); - return 0; + return ctrl_inw(port); } u32 r7780rp_inl(unsigned long port) { - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - return ctrl_inl(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + if (is_pci_ioaddr(port)) return ctrl_inl(pci_ioaddr(port)); - else - maybebadio(port); - return 0; + return ctrl_inl(port); } void r7780rp_outb(u8 value, unsigned long port) { if (CHECK_AX88796L_PORT(port)) ctrl_outw(value, port88796l(port, 0)); - else if (PXSEG(port)) - ctrl_outb(value, port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + else if (is_pci_ioaddr(port)) ctrl_outb(value, pci_ioaddr(port)); else - ctrl_outw(value, port2adr(port)); + ctrl_outb(value, port); } void r7780rp_outb_p(u8 value, unsigned long port) { if (CHECK_AX88796L_PORT(port)) ctrl_outw(value, port88796l(port, 0)); - else if (PXSEG(port)) - ctrl_outb(value, port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + else if (is_pci_ioaddr(port)) ctrl_outb(value, pci_ioaddr(port)); else - ctrl_outw(value, port2adr(port)); + ctrl_outb(value, port); ctrl_delay(); } void r7780rp_outw(u16 value, unsigned long port) { - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - ctrl_outw(value, port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + if (is_pci_ioaddr(port)) ctrl_outw(value, pci_ioaddr(port)); else - maybebadio(port); + ctrl_outw(value, port); } void r7780rp_outl(u32 value, unsigned long port) { - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - ctrl_outl(value, port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + if (is_pci_ioaddr(port)) ctrl_outl(value, pci_ioaddr(port)); else - maybebadio(port); + ctrl_outl(value, port); } void r7780rp_insb(unsigned long port, void *dst, unsigned long count) @@ -183,16 +130,13 @@ void r7780rp_insb(unsigned long port, void *dst, unsigned long count) p = (volatile u16 *)port88796l(port, 0); while (count--) *buf++ = *p & 0xff; - } else if (PXSEG(port)) { - while (count--) - *buf++ = *(volatile u8 *)port; - } else if (is_pci_ioaddr(port) || shifted_port(port)) { + } else if (is_pci_ioaddr(port)) { volatile u8 *bp = (volatile u8 *)pci_ioaddr(port); while (count--) *buf++ = *bp; } else { - p = (volatile u16 *)port2adr(port); + p = (volatile u16 *)port; while (count--) *buf++ = *p & 0xff; } @@ -205,12 +149,10 @@ void r7780rp_insw(unsigned long port, void *dst, unsigned long count) if (CHECK_AX88796L_PORT(port)) p = (volatile u16 *)port88796l(port, 1); - else if (PXSEG(port)) - p = (volatile u16 *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) + else if (is_pci_ioaddr(port)) p = (volatile u16 *)pci_ioaddr(port); else - p = (volatile u16 *)port2adr(port); + p = (volatile u16 *)port; while (count--) *buf++ = *p; @@ -220,17 +162,13 @@ void r7780rp_insw(unsigned long port, void *dst, unsigned long count) void r7780rp_insl(unsigned long port, void *dst, unsigned long count) { - u32 *buf = dst; - - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) { + if (is_pci_ioaddr(port)) { volatile u32 *p = (volatile u32 *)pci_ioaddr(port); + u32 *buf = dst; while (count--) *buf++ = *p; - } else - maybebadio(port); + } } void r7780rp_outsb(unsigned long port, const void *src, unsigned long count) @@ -242,19 +180,14 @@ void r7780rp_outsb(unsigned long port, const void *src, unsigned long count) p = (volatile u16 *)port88796l(port, 0); while (count--) *p = *buf++; - } else if (PXSEG(port)) - while (count--) - ctrl_outb(*buf++, port); - else if (is_pci_ioaddr(port) || shifted_port(port)) { + } else if (is_pci_ioaddr(port)) { volatile u8 *bp = (volatile u8 *)pci_ioaddr(port); while (count--) *bp = *buf++; - } else { - p = (volatile u16 *)port2adr(port); + } else while (count--) - *p = *buf++; - } + ctrl_outb(*buf++, port); } void r7780rp_outsw(unsigned long port, const void *src, unsigned long count) @@ -264,12 +197,10 @@ void r7780rp_outsw(unsigned long port, const void *src, unsigned long count) if (CHECK_AX88796L_PORT(port)) p = (volatile u16 *)port88796l(port, 1); - else if (PXSEG(port)) - p = (volatile u16 *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) + else if (is_pci_ioaddr(port)) p = (volatile u16 *)pci_ioaddr(port); else - p = (volatile u16 *)port2adr(port); + p = (volatile u16 *)port; while (count--) *p = *buf++; @@ -280,26 +211,23 @@ void r7780rp_outsw(unsigned long port, const void *src, unsigned long count) void r7780rp_outsl(unsigned long port, const void *src, unsigned long count) { const u32 *buf = src; + u32 *p; - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) { - volatile u32 *p = (volatile u32 *)pci_ioaddr(port); + if (is_pci_ioaddr(port)) + p = (u32 *)pci_ioaddr(port); + else + p = (u32 *)port; - while (count--) - *p = *buf++; - } else - maybebadio(port); + while (count--) + ctrl_outl(*buf++, (unsigned long)p); } void __iomem *r7780rp_ioport_map(unsigned long port, unsigned int size) { if (CHECK_AX88796L_PORT(port)) return (void __iomem *)port88796l(port, size > 1); - else if (PXSEG(port)) - return (void __iomem *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) + else if (is_pci_ioaddr(port)) return (void __iomem *)pci_ioaddr(port); - return (void __iomem *)port2adr(port); + return (void __iomem *)port; } diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c index c40f85c..0d74db9 100644 --- a/arch/sh/boards/renesas/r7780rp/setup.c +++ b/arch/sh/boards/renesas/r7780rp/setup.c @@ -2,7 +2,7 @@ * arch/sh/boards/renesas/r7780rp/setup.c * * Copyright (C) 2002 Atom Create Engineering Co., Ltd. - * Copyright (C) 2005, 2006 Paul Mundt + * Copyright (C) 2005 - 2007 Paul Mundt * * Renesas Solutions Highlander R7780RP-1 Support. * @@ -12,6 +12,7 @@ */ #include #include +#include #include #include #include @@ -45,14 +46,14 @@ static struct platform_device m66596_usb_host_device = { static struct resource cf_ide_resources[] = { [0] = { - .start = 0x1f0, - .end = 0x1f0 + 8, - .flags = IORESOURCE_IO, + .start = PA_AREA5_IO + 0x1000, + .end = PA_AREA5_IO + 0x1000 + 0x08 - 1, + .flags = IORESOURCE_MEM, }, [1] = { - .start = 0x1f0 + 0x206, - .end = 0x1f0 + 8 + 0x206 + 8, - .flags = IORESOURCE_IO, + .start = PA_AREA5_IO + 0x80c, + .end = PA_AREA5_IO + 0x80c + 0x16 - 1, + .flags = IORESOURCE_MEM, }, [2] = { #ifdef CONFIG_SH_R7780MP @@ -64,11 +65,18 @@ static struct resource cf_ide_resources[] = { }, }; +static struct pata_platform_info pata_info = { + .ioport_shift = 1, +}; + static struct platform_device cf_ide_device = { .name = "pata_platform", .id = -1, .num_resources = ARRAY_SIZE(cf_ide_resources), .resource = cf_ide_resources, + .dev = { + .platform_data = &pata_info, + }, }; static unsigned char heartbeat_bit_pos[] = { 2, 1, 0, 3, 6, 5, 4, 7 }; -- cgit v0.10.2 From e65fa9f59e9230b72ac298d445b4a18a4eefeb34 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 14 Feb 2007 15:06:09 +0900 Subject: sh: Kill off dead bigsur and ec3104 boards. Neither of these have had any maintenance in years, and there's no interest in keeping them straggling along. These have already been slated for removal some time, so finally just get rid of them. Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 90c8c42..4d16d89 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -135,12 +135,6 @@ config SH_HP6XX More information (hardware only) at . -config SH_EC3104 - bool "EC3104" - help - Select EC3104 if configuring for a system with an Eclipse - International EC3104 chip, e.g. the Harris AD2000. - config SH_SATURN bool "Saturn" select CPU_SUBTYPE_SH7604 @@ -156,9 +150,6 @@ config SH_DREAMCAST . There is a Dreamcast project is at . -config SH_BIGSUR - bool "BigSur" - config SH_MPC1211 bool "Interface MPC1211" help @@ -511,7 +502,7 @@ source "arch/sh/cchips/Kconfig" config HEARTBEAT bool "Heartbeat LED" depends on SH_MPC1211 || SH_SH03 || \ - SH_BIGSUR || SOLUTION_ENGINE || \ + SOLUTION_ENGINE || \ SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_LANDISK || \ SH_R7780RP help diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 4903c7c..bd9b172 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -94,10 +94,8 @@ machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE) := se/7300 machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) := se/7343 machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE) := se/73180 machdir-$(CONFIG_SH_HP6XX) := hp6xx -machdir-$(CONFIG_SH_EC3104) := ec3104 machdir-$(CONFIG_SH_SATURN) := saturn machdir-$(CONFIG_SH_DREAMCAST) := dreamcast -machdir-$(CONFIG_SH_BIGSUR) := bigsur machdir-$(CONFIG_SH_MPC1211) := mpc1211 machdir-$(CONFIG_SH_SH03) := sh03 machdir-$(CONFIG_SH_SECUREEDGE5410) := snapgear diff --git a/arch/sh/boards/bigsur/Makefile b/arch/sh/boards/bigsur/Makefile deleted file mode 100644 index 0ff9497..0000000 --- a/arch/sh/boards/bigsur/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for the BigSur specific parts of the kernel -# - -obj-y := setup.o io.o irq.o led.o - diff --git a/arch/sh/boards/bigsur/io.c b/arch/sh/boards/bigsur/io.c deleted file mode 100644 index 23071f9..0000000 --- a/arch/sh/boards/bigsur/io.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * arch/sh/boards/bigsur/io.c - * - * By Dustin McIntire (dustin@sensoria.com) (c)2001 - * Derived from io_hd64465.h, which bore the message: - * By Greg Banks - * (c) 2000 PocketPenguins Inc. - * and from io_hd64461.h, which bore the message: - * Copyright 2000 Stuart Menefy (stuart.menefy@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * IO functions for a Hitachi Big Sur Evaluation Board. - */ - -#include -#include -#include -#include -#include - -/* Low iomap maps port 0-1K to addresses in 8byte chunks */ -#define BIGSUR_IOMAP_LO_THRESH 0x400 -#define BIGSUR_IOMAP_LO_SHIFT 3 -#define BIGSUR_IOMAP_LO_MASK ((1<>BIGSUR_IOMAP_LO_SHIFT) -static u32 bigsur_iomap_lo[BIGSUR_IOMAP_LO_NMAP]; -static u8 bigsur_iomap_lo_shift[BIGSUR_IOMAP_LO_NMAP]; - -/* High iomap maps port 1K-64K to addresses in 1K chunks */ -#define BIGSUR_IOMAP_HI_THRESH 0x10000 -#define BIGSUR_IOMAP_HI_SHIFT 10 -#define BIGSUR_IOMAP_HI_MASK ((1<>BIGSUR_IOMAP_HI_SHIFT) -static u32 bigsur_iomap_hi[BIGSUR_IOMAP_HI_NMAP]; -static u8 bigsur_iomap_hi_shift[BIGSUR_IOMAP_HI_NMAP]; - -void bigsur_port_map(u32 baseport, u32 nports, u32 addr, u8 shift) -{ - u32 port, endport = baseport + nports; - - pr_debug("bigsur_port_map(base=0x%0x, n=0x%0x, addr=0x%08x)\n", - baseport, nports, addr); - - for (port = baseport ; - port < endport && port < BIGSUR_IOMAP_LO_THRESH ; - port += (1<>BIGSUR_IOMAP_LO_SHIFT] = addr; - bigsur_iomap_lo_shift[port>>BIGSUR_IOMAP_LO_SHIFT] = shift; - addr += (1<<(BIGSUR_IOMAP_LO_SHIFT)); - } - - for (port = max_t(u32, baseport, BIGSUR_IOMAP_LO_THRESH); - port < endport && port < BIGSUR_IOMAP_HI_THRESH ; - port += (1<>BIGSUR_IOMAP_HI_SHIFT] = addr; - bigsur_iomap_hi_shift[port>>BIGSUR_IOMAP_HI_SHIFT] = shift; - addr += (1<<(BIGSUR_IOMAP_HI_SHIFT)); - } -} -EXPORT_SYMBOL(bigsur_port_map); - -void bigsur_port_unmap(u32 baseport, u32 nports) -{ - u32 port, endport = baseport + nports; - - pr_debug("bigsur_port_unmap(base=0x%0x, n=0x%0x)\n", baseport, nports); - - for (port = baseport ; - port < endport && port < BIGSUR_IOMAP_LO_THRESH ; - port += (1<>BIGSUR_IOMAP_LO_SHIFT] = 0; - } - - for (port = max_t(u32, baseport, BIGSUR_IOMAP_LO_THRESH); - port < endport && port < BIGSUR_IOMAP_HI_THRESH ; - port += (1<>BIGSUR_IOMAP_HI_SHIFT] = 0; - } -} -EXPORT_SYMBOL(bigsur_port_unmap); - -unsigned long bigsur_isa_port2addr(unsigned long port) -{ - unsigned long addr = 0; - unsigned char shift; - - /* Physical address not in P0, do nothing */ - if (PXSEG(port)) { - addr = port; - /* physical address in P0, map to P2 */ - } else if (port >= 0x30000) { - addr = P2SEGADDR(port); - /* Big Sur I/O + HD64465 registers 0x10000-0x30000 */ - } else if (port >= BIGSUR_IOMAP_HI_THRESH) { - addr = BIGSUR_INTERNAL_BASE + (port - BIGSUR_IOMAP_HI_THRESH); - /* Handle remapping of high IO/PCI IO ports */ - } else if (port >= BIGSUR_IOMAP_LO_THRESH) { - addr = bigsur_iomap_hi[port >> BIGSUR_IOMAP_HI_SHIFT]; - shift = bigsur_iomap_hi_shift[port >> BIGSUR_IOMAP_HI_SHIFT]; - - if (addr != 0) - addr += (port & BIGSUR_IOMAP_HI_MASK) << shift; - } else { - /* Handle remapping of low IO ports */ - addr = bigsur_iomap_lo[port >> BIGSUR_IOMAP_LO_SHIFT]; - shift = bigsur_iomap_lo_shift[port >> BIGSUR_IOMAP_LO_SHIFT]; - - if (addr != 0) - addr += (port & BIGSUR_IOMAP_LO_MASK) << shift; - } - - pr_debug("%s(0x%08lx) = 0x%08lx\n", __FUNCTION__, port, addr); - - return addr; -} - diff --git a/arch/sh/boards/bigsur/irq.c b/arch/sh/boards/bigsur/irq.c deleted file mode 100644 index 1ab04da..0000000 --- a/arch/sh/boards/bigsur/irq.c +++ /dev/null @@ -1,334 +0,0 @@ -/* - * - * By Dustin McIntire (dustin@sensoria.com) (c)2001 - * - * Setup and IRQ handling code for the HD64465 companion chip. - * by Greg Banks - * Copyright (c) 2000 PocketPenguins Inc - * - * Derived from setup_hd64465.c which bore the message: - * Greg Banks - * Copyright (c) 2000 PocketPenguins Inc and - * Copyright (C) 2000 YAEGASHI Takeshi - * and setup_cqreek.c which bore message: - * Copyright (C) 2000 Niibe Yutaka - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * IRQ functions for a Hitachi Big Sur Evaluation Board. - * - */ -#undef DEBUG - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include - -//#define BIGSUR_DEBUG 3 -#undef BIGSUR_DEBUG - -#ifdef BIGSUR_DEBUG -#define DIPRINTK(n, args...) if (BIGSUR_DEBUG>(n)) printk(args) -#else -#define DIPRINTK(n, args...) -#endif /* BIGSUR_DEBUG */ - -#ifdef CONFIG_HD64465 -extern int hd64465_irq_demux(int irq); -#endif /* CONFIG_HD64465 */ - - -/*===========================================================*/ -// Big Sur CPLD IRQ Routines -/*===========================================================*/ - -/* Level 1 IRQ routines */ -static void disable_bigsur_l1irq(unsigned int irq) -{ - unsigned char mask; - unsigned int mask_port = ((irq - BIGSUR_IRQ_LOW)/8) ? BIGSUR_IRLMR1 : BIGSUR_IRLMR0; - unsigned char bit = (1 << ((irq - MGATE_IRQ_LOW)%8) ); - - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - pr_debug("Disable L1 IRQ %d\n", irq); - DIPRINTK(2,"disable_bigsur_l1irq: IMR=0x%08x mask=0x%x\n", - mask_port, bit); - - /* Disable IRQ - set mask bit */ - mask = inb(mask_port) | bit; - outb(mask, mask_port); - return; - } - pr_debug("disable_bigsur_l1irq: Invalid IRQ %d\n", irq); -} - -static void enable_bigsur_l1irq(unsigned int irq) -{ - unsigned char mask; - unsigned int mask_port = ((irq - BIGSUR_IRQ_LOW)/8) ? BIGSUR_IRLMR1 : BIGSUR_IRLMR0; - unsigned char bit = (1 << ((irq - MGATE_IRQ_LOW)%8) ); - - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - pr_debug("Enable L1 IRQ %d\n", irq); - DIPRINTK(2,"enable_bigsur_l1irq: IMR=0x%08x mask=0x%x\n", - mask_port, bit); - /* Enable L1 IRQ - clear mask bit */ - mask = inb(mask_port) & ~bit; - outb(mask, mask_port); - return; - } - pr_debug("enable_bigsur_l1irq: Invalid IRQ %d\n", irq); -} - - -/* Level 2 irq masks and registers for L2 decoding */ -/* Level2 bitmasks for each level 1 IRQ */ -const u32 bigsur_l2irq_mask[] = - {0x40,0x80,0x08,0x01,0x01,0x3C,0x3E,0xFF,0x40,0x80,0x06,0x03}; -/* Level2 to ISR[n] map for each level 1 IRQ */ -const u32 bigsur_l2irq_reg[] = - { 2, 2, 3, 3, 1, 2, 1, 0, 1, 1, 3, 2}; -/* Level2 to Level 1 IRQ map */ -const u32 bigsur_l2_l1_map[] = - {7,7,7,7,7,7,7,7, 4,6,6,6,6,6,8,9, 11,11,5,5,5,5,0,1, 3,10,10,2,-1,-1,-1,-1}; -/* IRQ inactive level (high or low) */ -const u32 bigsur_l2_inactv_state[] = {0x00, 0xBE, 0xFC, 0xF7}; - -/* CPLD external status and mask registers base and offsets */ -static const u32 isr_base = BIGSUR_IRQ0; -static const u32 isr_offset = BIGSUR_IRQ0 - BIGSUR_IRQ1; -static const u32 imr_base = BIGSUR_IMR0; -static const u32 imr_offset = BIGSUR_IMR0 - BIGSUR_IMR1; - -#define REG_NUM(irq) ((irq-BIGSUR_2NDLVL_IRQ_LOW)/8 ) - -/* Level 2 IRQ routines */ -static void disable_bigsur_l2irq(unsigned int irq) -{ - unsigned char mask; - unsigned char bit = 1 << ((irq-BIGSUR_2NDLVL_IRQ_LOW)%8); - unsigned int mask_port = imr_base - REG_NUM(irq)*imr_offset; - - if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) { - pr_debug("Disable L2 IRQ %d\n", irq); - DIPRINTK(2,"disable_bigsur_l2irq: IMR=0x%08x mask=0x%x\n", - mask_port, bit); - - /* Disable L2 IRQ - set mask bit */ - mask = inb(mask_port) | bit; - outb(mask, mask_port); - return; - } - pr_debug("disable_bigsur_l2irq: Invalid IRQ %d\n", irq); -} - -static void enable_bigsur_l2irq(unsigned int irq) -{ - unsigned char mask; - unsigned char bit = 1 << ((irq-BIGSUR_2NDLVL_IRQ_LOW)%8); - unsigned int mask_port = imr_base - REG_NUM(irq)*imr_offset; - - if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) { - pr_debug("Enable L2 IRQ %d\n", irq); - DIPRINTK(2,"enable_bigsur_l2irq: IMR=0x%08x mask=0x%x\n", - mask_port, bit); - - /* Enable L2 IRQ - clear mask bit */ - mask = inb(mask_port) & ~bit; - outb(mask, mask_port); - return; - } - pr_debug("enable_bigsur_l2irq: Invalid IRQ %d\n", irq); -} - -static void mask_and_ack_bigsur(unsigned int irq) -{ - pr_debug("mask_and_ack_bigsur IRQ %d\n", irq); - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) - disable_bigsur_l1irq(irq); - else - disable_bigsur_l2irq(irq); -} - -static void end_bigsur_irq(unsigned int irq) -{ - pr_debug("end_bigsur_irq IRQ %d\n", irq); - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) { - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) - enable_bigsur_l1irq(irq); - else - enable_bigsur_l2irq(irq); - } -} - -static unsigned int startup_bigsur_irq(unsigned int irq) -{ - u8 mask; - u32 reg; - - pr_debug("startup_bigsur_irq IRQ %d\n", irq); - - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - /* Enable the L1 IRQ */ - enable_bigsur_l1irq(irq); - /* Enable all L2 IRQs in this L1 IRQ */ - mask = ~(bigsur_l2irq_mask[irq-BIGSUR_IRQ_LOW]); - reg = imr_base - bigsur_l2irq_reg[irq-BIGSUR_IRQ_LOW] * imr_offset; - mask &= inb(reg); - outb(mask,reg); - DIPRINTK(2,"startup_bigsur_irq: IMR=0x%08x mask=0x%x\n",reg,inb(reg)); - } - else { - /* Enable the L2 IRQ - clear mask bit */ - enable_bigsur_l2irq(irq); - /* Enable the L1 bit masking this L2 IRQ */ - enable_bigsur_l1irq(bigsur_l2_l1_map[irq-BIGSUR_2NDLVL_IRQ_LOW]); - DIPRINTK(2,"startup_bigsur_irq: L1=%d L2=%d\n", - bigsur_l2_l1_map[irq-BIGSUR_2NDLVL_IRQ_LOW],irq); - } - return 0; -} - -static void shutdown_bigsur_irq(unsigned int irq) -{ - pr_debug("shutdown_bigsur_irq IRQ %d\n", irq); - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) - disable_bigsur_l1irq(irq); - else - disable_bigsur_l2irq(irq); -} - -/* Define the IRQ structures for the L1 and L2 IRQ types */ -static struct hw_interrupt_type bigsur_l1irq_type = { - .typename = "BigSur-CPLD-Level1-IRQ", - .startup = startup_bigsur_irq, - .shutdown = shutdown_bigsur_irq, - .enable = enable_bigsur_l1irq, - .disable = disable_bigsur_l1irq, - .ack = mask_and_ack_bigsur, - .end = end_bigsur_irq -}; - -static struct hw_interrupt_type bigsur_l2irq_type = { - .typename = "BigSur-CPLD-Level2-IRQ", - .startup = startup_bigsur_irq, - .shutdown =shutdown_bigsur_irq, - .enable = enable_bigsur_l2irq, - .disable = disable_bigsur_l2irq, - .ack = mask_and_ack_bigsur, - .end = end_bigsur_irq -}; - - -static void make_bigsur_l1isr(unsigned int irq) { - - /* sanity check first */ - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - /* save the handler in the main description table */ - irq_desc[irq].chip = &bigsur_l1irq_type; - irq_desc[irq].status = IRQ_DISABLED; - irq_desc[irq].action = 0; - irq_desc[irq].depth = 1; - - disable_bigsur_l1irq(irq); - return; - } - pr_debug("make_bigsur_l1isr: bad irq, %d\n", irq); - return; -} - -static void make_bigsur_l2isr(unsigned int irq) { - - /* sanity check first */ - if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) { - /* save the handler in the main description table */ - irq_desc[irq].chip = &bigsur_l2irq_type; - irq_desc[irq].status = IRQ_DISABLED; - irq_desc[irq].action = 0; - irq_desc[irq].depth = 1; - - disable_bigsur_l2irq(irq); - return; - } - pr_debug("make_bigsur_l2isr: bad irq, %d\n", irq); - return; -} - -/* The IRQ's will be decoded as follows: - * If a level 2 handler exists and there is an unmasked active - * IRQ, the 2nd level handler will be called. - * If a level 2 handler does not exist for the active IRQ - * the 1st level handler will be called. - */ - -int bigsur_irq_demux(int irq) -{ - int dmux_irq = irq; - u8 mask, actv_irqs; - u32 reg_num; - - DIPRINTK(3,"bigsur_irq_demux, irq=%d\n", irq); - /* decode the 1st level IRQ */ - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - /* Get corresponding L2 ISR bitmask and ISR number */ - mask = bigsur_l2irq_mask[irq-BIGSUR_IRQ_LOW]; - reg_num = bigsur_l2irq_reg[irq-BIGSUR_IRQ_LOW]; - /* find the active IRQ's (XOR with inactive level)*/ - actv_irqs = inb(isr_base-reg_num*isr_offset) ^ - bigsur_l2_inactv_state[reg_num]; - /* decode active IRQ's */ - actv_irqs = actv_irqs & mask & ~(inb(imr_base-reg_num*imr_offset)); - /* if NEZ then we have an active L2 IRQ */ - if(actv_irqs) dmux_irq = ffz(~actv_irqs) + reg_num*8+BIGSUR_2NDLVL_IRQ_LOW; - /* if no 2nd level IRQ action, but has 1st level, use 1st level handler */ - if(!irq_desc[dmux_irq].action && irq_desc[irq].action) - dmux_irq = irq; - DIPRINTK(1,"bigsur_irq_demux: irq=%d dmux_irq=%d mask=0x%04x reg=%d\n", - irq, dmux_irq, mask, reg_num); - } -#ifdef CONFIG_HD64465 - dmux_irq = hd64465_irq_demux(dmux_irq); -#endif /* CONFIG_HD64465 */ - DIPRINTK(3,"bigsur_irq_demux, demux_irq=%d\n", dmux_irq); - - return dmux_irq; -} - -/*===========================================================*/ -// Big Sur Init Routines -/*===========================================================*/ -void __init init_bigsur_IRQ(void) -{ - int i; - - if (!MACH_BIGSUR) return; - - /* Create ISR's for Big Sur CPLD IRQ's */ - /*==============================================================*/ - for(i=BIGSUR_IRQ_LOW;i - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Big Sur specific LED code. - */ - -#include -#include - -static void mach_led(int position, int value) -{ - int word; - - word = bigsur_inl(BIGSUR_CSLR); - if (value) { - bigsur_outl(word & ~BIGSUR_LED, BIGSUR_CSLR); - } else { - bigsur_outl(word | BIGSUR_LED, BIGSUR_CSLR); - } -} - -#ifdef CONFIG_HEARTBEAT - -#include - -/* Cycle the LED on/off */ -void heartbeat_bigsur(void) -{ - static unsigned cnt = 0, period = 0, dist = 0; - - if (cnt == 0 || cnt == dist) - mach_led( -1, 1); - else if (cnt == 7 || cnt == dist+7) - mach_led( -1, 0); - - if (++cnt > period) { - cnt = 0; - /* The hyperbolic function below modifies the heartbeat period - * length in dependency of the current (5min) load. It goes - * through the points f(0)=126, f(1)=86, f(5)=51, - * f(inf)->30. */ - period = ((672< - * Copyright (c) 2000 PocketPenguins Inc - * - * Derived from setup_hd64465.c which bore the message: - * Greg Banks - * Copyright (c) 2000 PocketPenguins Inc and - * Copyright (C) 2000 YAEGASHI Takeshi - * and setup_cqreek.c which bore message: - * Copyright (C) 2000 Niibe Yutaka - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Setup functions for a Hitachi Big Sur Evaluation Board. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -/*===========================================================*/ -// Big Sur Init Routines -/*===========================================================*/ - -static void __init bigsur_setup(char **cmdline_p) -{ - /* Mask all 2nd level IRQ's */ - outb(-1,BIGSUR_IMR0); - outb(-1,BIGSUR_IMR1); - outb(-1,BIGSUR_IMR2); - outb(-1,BIGSUR_IMR3); - - /* Mask 1st level interrupts */ - outb(-1,BIGSUR_IRLMR0); - outb(-1,BIGSUR_IRLMR1); - -#if defined (CONFIG_HD64465) && defined (CONFIG_SERIAL) - /* remap IO ports for first ISA serial port to HD64465 UART */ - bigsur_port_map(0x3f8, 8, CONFIG_HD64465_IOBASE + 0x8000, 1); -#endif /* CONFIG_HD64465 && CONFIG_SERIAL */ - /* TODO: setup IDE registers */ - bigsur_port_map(BIGSUR_IDECTL_IOPORT, 2, BIGSUR_ICTL, 8); - /* Setup the Ethernet port to BIGSUR_ETHER_IOPORT */ - bigsur_port_map(BIGSUR_ETHER_IOPORT, 16, BIGSUR_ETHR+BIGSUR_ETHER_IOPORT, 0); - /* set page to 1 */ - outw(1, BIGSUR_ETHR+0xe); - /* set the IO port to BIGSUR_ETHER_IOPORT */ - outw(BIGSUR_ETHER_IOPORT<<3, BIGSUR_ETHR+0x2); -} - -/* - * The Machine Vector - */ -extern void heartbeat_bigsur(void); -extern void init_bigsur_IRQ(void); - -struct sh_machine_vector mv_bigsur __initmv = { - .mv_name = "Big Sur", - .mv_setup = bigsur_setup, - - .mv_isa_port2addr = bigsur_isa_port2addr, - .mv_irq_demux = bigsur_irq_demux, - - .mv_init_irq = init_bigsur_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_bigsur, -#endif -}; -ALIAS_MV(bigsur) diff --git a/arch/sh/boards/ec3104/Makefile b/arch/sh/boards/ec3104/Makefile deleted file mode 100644 index 1788915..0000000 --- a/arch/sh/boards/ec3104/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for the EC3104 specific parts of the kernel -# - -obj-y := setup.o io.o irq.o - diff --git a/arch/sh/boards/ec3104/io.c b/arch/sh/boards/ec3104/io.c deleted file mode 100644 index 2f86394..0000000 --- a/arch/sh/boards/ec3104/io.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * linux/arch/sh/boards/ec3104/io.c - * EC3104 companion chip support - * - * Copyright (C) 2000 Philipp Rumpf - * - */ -/* EC3104 note: - * This code was written without any documentation about the EC3104 chip. While - * I hope I got most of the basic functionality right, the register names I use - * are most likely completely different from those in the chip documentation. - * - * If you have any further information about the EC3104, please tell me - * (prumpf@tux.org). - */ - -#include -#include -#include -#include -#include - -/* - * EC3104 has a real ISA bus which we redirect low port accesses to (the - * actual device on mine is a ESS 1868, and I don't want to hack the driver - * more than strictly necessary). I am not going to duplicate the - * hard coding of PC addresses (for the 16550s aso) here though; it's just - * too ugly. - */ - -#define low_port(port) ((port) < 0x10000) - -static inline unsigned long port2addr(unsigned long port) -{ - switch(port >> 16) { - case 0: - return EC3104_ISA_BASE + port * 2; - - /* XXX hack. it's unclear what to do about the serial ports */ - case 1: - return EC3104_BASE + (port&0xffff) * 4; - - default: - /* XXX PCMCIA */ - return 0; - } -} - -unsigned char ec3104_inb(unsigned long port) -{ - u8 ret; - - ret = *(volatile u8 *)port2addr(port); - - return ret; -} - -unsigned short ec3104_inw(unsigned long port) -{ - BUG(); -} - -unsigned long ec3104_inl(unsigned long port) -{ - BUG(); -} - -void ec3104_outb(unsigned char data, unsigned long port) -{ - *(volatile u8 *)port2addr(port) = data; -} - -void ec3104_outw(unsigned short data, unsigned long port) -{ - BUG(); -} - -void ec3104_outl(unsigned long data, unsigned long port) -{ - BUG(); -} diff --git a/arch/sh/boards/ec3104/irq.c b/arch/sh/boards/ec3104/irq.c deleted file mode 100644 index ffa4ff1..0000000 --- a/arch/sh/boards/ec3104/irq.c +++ /dev/null @@ -1,196 +0,0 @@ -/* - * linux/arch/sh/boards/ec3104/irq.c - * EC3104 companion chip support - * - * Copyright (C) 2000 Philipp Rumpf - * - */ - -#include -#include -#include - -/* This is for debugging mostly; here's the table that I intend to keep - * in here: - * - * index function base addr power interrupt bit - * 0 power b0ec0000 --- 00000001 (unused) - * 1 irqs b0ec1000 --- 00000002 (unused) - * 2 ?? b0ec2000 b0ec0008 00000004 - * 3 PS2 (1) b0ec3000 b0ec000c 00000008 - * 4 PS2 (2) b0ec4000 b0ec0010 00000010 - * 5 ?? b0ec5000 b0ec0014 00000020 - * 6 I2C b0ec6000 b0ec0018 00000040 - * 7 serial (1) b0ec7000 b0ec001c 00000080 - * 8 serial (2) b0ec8000 b0ec0020 00000100 - * 9 serial (3) b0ec9000 b0ec0024 00000200 - * 10 serial (4) b0eca000 b0ec0028 00000400 - * 12 GPIO (1) b0ecc000 b0ec0030 - * 13 GPIO (2) b0ecc000 b0ec0030 - * 16 pcmcia (1) b0ed0000 b0ec0040 00010000 - * 17 pcmcia (2) b0ed1000 b0ec0044 00020000 - */ - -/* I used the register names from another interrupt controller I worked with, - * since it seems to be identical to the ec3104 except that all bits are - * inverted: - * - * IRR: Interrupt Request Register (pending and enabled interrupts) - * IMR: Interrupt Mask Register (which interrupts are enabled) - * IPR: Interrupt Pending Register (pending interrupts, even disabled ones) - * - * 0 bits mean pending or enabled, 1 bits mean not pending or disabled. all - * IRQs seem to be level-triggered. - */ - -#define EC3104_IRR (EC3104_BASE + 0x1000) -#define EC3104_IMR (EC3104_BASE + 0x1004) -#define EC3104_IPR (EC3104_BASE + 0x1008) - -#define ctrl_readl(addr) (*(volatile u32 *)(addr)) -#define ctrl_writel(data,addr) (*(volatile u32 *)(addr) = (data)) -#define ctrl_readb(addr) (*(volatile u8 *)(addr)) - -static char *ec3104_name(unsigned index) -{ - switch(index) { - case 0: - return "power management"; - case 1: - return "interrupts"; - case 3: - return "PS2 (1)"; - case 4: - return "PS2 (2)"; - case 5: - return "I2C (1)"; - case 6: - return "I2C (2)"; - case 7: - return "serial (1)"; - case 8: - return "serial (2)"; - case 9: - return "serial (3)"; - case 10: - return "serial (4)"; - case 16: - return "pcmcia (1)"; - case 17: - return "pcmcia (2)"; - default: { - static char buf[32]; - - sprintf(buf, "unknown (%d)", index); - - return buf; - } - } -} - -int get_pending_interrupts(char *buf) -{ - u32 ipr; - u32 bit; - char *p = buf; - - p += sprintf(p, "pending: ("); - - ipr = ctrl_inl(EC3104_IPR); - - for (bit = 1; bit < 32; bit++) - if (!(ipr & (1< - * - */ -/* EC3104 note: - * This code was written without any documentation about the EC3104 chip. While - * I hope I got most of the basic functionality right, the register names I use - * are most likely completely different from those in the chip documentation. - * - * If you have any further information about the EC3104, please tell me - * (prumpf@tux.org). - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static void __init ec3104_setup(char **cmdline_p) -{ - char str[8]; - int i; - - for (i=0; i<8; i++) - str[i] = ctrl_readb(EC3104_BASE + i); - - for (i = EC3104_IRQBASE; i < EC3104_IRQBASE + 32; i++) - irq_desc[i].handler = &ec3104_int; - - printk("initializing EC3104 \"%.8s\" at %08x, IRQ %d, IRQ base %d\n", - str, EC3104_BASE, EC3104_IRQ, EC3104_IRQBASE); - - /* mask all interrupts. this should have been done by the boot - * loader for us but we want to be sure ... */ - ctrl_writel(0xffffffff, EC3104_IMR); -} - -/* - * The Machine Vector - */ -struct sh_machine_vector mv_ec3104 __initmv = { - .mv_name = "EC3104", - .mv_setup = ec3104_setup, - .mv_nr_irqs = 96, - - .mv_inb = ec3104_inb, - .mv_inw = ec3104_inw, - .mv_inl = ec3104_inl, - .mv_outb = ec3104_outb, - .mv_outw = ec3104_outw, - .mv_outl = ec3104_outl, - - .mv_irq_demux = ec3104_irq_demux, -}; -ALIAS_MV(ec3104) diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 9e00cb8..cc8d0d0 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -12,7 +12,6 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \ dma-dreamcast.o obj-$(CONFIG_SH_SECUREEDGE5410) += ops-snapgear.o -obj-$(CONFIG_SH_BIGSUR) += ops-bigsur.o obj-$(CONFIG_SH_RTS7751R2D) += ops-rts7751r2d.o fixups-rts7751r2d.o obj-$(CONFIG_SH_SH03) += ops-sh03.o fixups-sh03.o obj-$(CONFIG_SH_R7780RP) += ops-r7780rp.o fixups-r7780rp.o diff --git a/arch/sh/drivers/pci/ops-bigsur.c b/arch/sh/drivers/pci/ops-bigsur.c deleted file mode 100644 index eb31be7..0000000 --- a/arch/sh/drivers/pci/ops-bigsur.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * linux/arch/sh/drivers/pci/ops-bigsur.c - * - * By Dustin McIntire (dustin@sensoria.com) (c)2001 - * - * Ported to new API by Paul Mundt . - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * PCI initialization for the Hitachi Big Sur Evaluation Board - */ -#include -#include -#include -#include -#include -#include "pci-sh4.h" -#include - -#define BIGSUR_PCI_IO 0x4000 -#define BIGSUR_PCI_MEM 0xfd000000 - -static struct resource sh7751_io_resource = { - .name = "SH7751 IO", - .start = BIGSUR_PCI_IO, - .end = BIGSUR_PCI_IO + (64*1024) - 1, - .flags = IORESOURCE_IO, -}; - -static struct resource sh7751_mem_resource = { - .name = "SH7751 mem", - .start = BIGSUR_PCI_MEM, - .end = BIGSUR_PCI_MEM + (64*1024*1024) - 1, - .flags = IORESOURCE_MEM, -}; - -extern struct pci_ops sh7751_pci_ops; - -struct pci_channel board_pci_channels[] = { - { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, - { 0, } -}; - -static struct sh4_pci_address_map sh7751_pci_map = { - .window0 = { - .base = SH7751_CS3_BASE_ADDR, - .size = BIGSUR_LSR0_SIZE, - }, - - .window1 = { - .base = SH7751_CS3_BASE_ADDR, - .size = BIGSUR_LSR1_SIZE, - }, -}; - -/* - * Initialize the Big Sur PCI interface - * Setup hardware to be Central Funtion - * Copy the BSR regs to the PCI interface - * Setup PCI windows into local RAM - */ -int __init pcibios_init_platform(void) -{ - return sh7751_pcic_init(&sh7751_pci_map); -} - -int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) -{ - /* - * The Big Sur can be used in a CPCI chassis, but the SH7751 PCI - * interface is on the wrong end of the board so that it can also - * support a V320 CPI interface chip... Therefor the IRQ mapping is - * somewhat use dependent... I'l assume a linear map for now, i.e. - * INTA=slot0,pin0... INTD=slot3,pin0... - */ - int irq = (slot + pin-1) % 4 + BIGSUR_SH7751_PCI_IRQ_BASE; - - PCIDBG(2, "PCI: Mapping Big Sur IRQ for slot %d, pin %c to irq %d\n", - slot, pin-1+'A', irq); - - return irq; -} diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index 85e1ee2..9ddff76 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -157,15 +157,6 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map) PCIBIOS_MIN_IO, (64 << 10), SH7751_PCI_IO_BASE + PCIBIOS_MIN_IO); - /* - * XXX: For now, leave this board-specific. In the event we have other - * boards that need to do similar work, this can be wrapped. - */ -#ifdef CONFIG_SH_BIGSUR - bigsur_port_map(PCIBIOS_MIN_IO, (64 << 10), - SH7751_PCI_IO_BASE + PCIBIOS_MIN_IO, 0); -#endif - /* Make sure the MSB's of IO window are set to access PCI space * correctly */ word = PCIBIOS_MIN_IO & SH4_PCIIOBR_MASK; diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index 0571755..4fe0f94 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -16,7 +16,6 @@ HD64461 HD64461 HD64465 HD64465 SATURN SH_SATURN DREAMCAST SH_DREAMCAST -BIGSUR SH_BIGSUR MPC1211 SH_MPC1211 SNAPGEAR SH_SECUREEDGE5410 HS7751RVOIP SH_HS7751RVOIP diff --git a/include/asm-sh/bigsur/bigsur.h b/include/asm-sh/bigsur/bigsur.h deleted file mode 100644 index 427245f..0000000 --- a/include/asm-sh/bigsur/bigsur.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * - * Hitachi Big Sur Eval Board support - * - * Dustin McIntire (dustin@sensoria.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Derived from Hitachi SH7751 reference manual - * - */ - -#ifndef _ASM_BIGSUR_H_ -#define _ASM_BIGSUR_H_ - -#include -#include - -/* 7751 Internal IRQ's used by external CPLD controller */ -#define BIGSUR_IRQ_LOW 0 -#define BIGSUR_IRQ_NUM 14 /* External CPLD level 1 IRQs */ -#define BIGSUR_IRQ_HIGH (BIGSUR_IRQ_LOW + BIGSUR_IRQ_NUM) -#define BIGSUR_2NDLVL_IRQ_LOW (HD64465_IRQ_BASE+HD64465_IRQ_NUM) -#define BIGSUR_2NDLVL_IRQ_NUM 32 /* Level 2 IRQs = 4 regs * 8 bits */ -#define BIGSUR_2NDLVL_IRQ_HIGH (BIGSUR_2NDLVL_IRQ_LOW + \ - BIGSUR_2NDLVL_IRQ_NUM) - -/* PCI interrupt base number (A_INTA-A_INTD) */ -#define BIGSUR_SH7751_PCI_IRQ_BASE (BIGSUR_2NDLVL_IRQ_LOW+10) - -/* CPLD registers and external chip addresses */ -#define BIGSUR_HD64464_ADDR 0xB2000000 -#define BIGSUR_DGDR 0xB1FFFE00 -#define BIGSUR_BIDR 0xB1FFFD00 -#define BIGSUR_CSLR 0xB1FFFC00 -#define BIGSUR_SW1R 0xB1FFFB00 -#define BIGSUR_DBGR 0xB1FFFA00 -#define BIGSUR_BDTR 0xB1FFF900 -#define BIGSUR_BDRR 0xB1FFF800 -#define BIGSUR_PPR1 0xB1FFF700 -#define BIGSUR_PPR2 0xB1FFF600 -#define BIGSUR_IDE2 0xB1FFF500 -#define BIGSUR_IDE3 0xB1FFF400 -#define BIGSUR_SPCR 0xB1FFF300 -#define BIGSUR_ETHR 0xB1FE0000 -#define BIGSUR_PPDR 0xB1FDFF00 -#define BIGSUR_ICTL 0xB1FDFE00 -#define BIGSUR_ICMD 0xB1FDFD00 -#define BIGSUR_DMA0 0xB1FDFC00 -#define BIGSUR_DMA1 0xB1FDFB00 -#define BIGSUR_IRQ0 0xB1FDFA00 -#define BIGSUR_IRQ1 0xB1FDF900 -#define BIGSUR_IRQ2 0xB1FDF800 -#define BIGSUR_IRQ3 0xB1FDF700 -#define BIGSUR_IMR0 0xB1FDF600 -#define BIGSUR_IMR1 0xB1FDF500 -#define BIGSUR_IMR2 0xB1FDF400 -#define BIGSUR_IMR3 0xB1FDF300 -#define BIGSUR_IRLMR0 0xB1FDF200 -#define BIGSUR_IRLMR1 0xB1FDF100 -#define BIGSUR_V320USC_ADDR 0xB1000000 -#define BIGSUR_HD64465_ADDR 0xB0000000 -#define BIGSUR_INTERNAL_BASE 0xB0000000 - -/* SMC ethernet card parameters */ -#define BIGSUR_ETHER_IOPORT 0x220 - -/* IDE register paramters */ -#define BIGSUR_IDECMD_IOPORT 0x1f0 -#define BIGSUR_IDECTL_IOPORT 0x1f8 - -/* LED bit position in BIGSUR_CSLR */ -#define BIGSUR_LED (1<<4) - -/* PCI: default LOCAL memory window sizes (seen from PCI bus) */ -#define BIGSUR_LSR0_SIZE (64*(1<<20)) //64MB -#define BIGSUR_LSR1_SIZE (64*(1<<20)) //64MB - -#endif /* _ASM_BIGSUR_H_ */ diff --git a/include/asm-sh/bigsur/io.h b/include/asm-sh/bigsur/io.h deleted file mode 100644 index 1470ac8..0000000 --- a/include/asm-sh/bigsur/io.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * include/asm-sh/bigsur/io.h - * - * By Dustin McIntire (dustin@sensoria.com) (c)2001 - * Derived from io_hd64465.h, which bore the message: - * By Greg Banks - * (c) 2000 PocketPenguins Inc. - * and from io_hd64461.h, which bore the message: - * Copyright 2000 Stuart Menefy (stuart.menefy@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * IO functions for a Hitachi Big Sur Evaluation Board. - */ - -#ifndef _ASM_SH_IO_BIGSUR_H -#define _ASM_SH_IO_BIGSUR_H - -#include - -extern unsigned long bigsur_isa_port2addr(unsigned long offset); -extern int bigsur_irq_demux(int irq); -/* Provision for generic secondary demux step -- used by PCMCIA code */ -extern void bigsur_register_irq_demux(int irq, - int (*demux)(int irq, void *dev), void *dev); -extern void bigsur_unregister_irq_demux(int irq); -/* Set this variable to 1 to see port traffic */ -extern int bigsur_io_debug; -/* Map a range of ports to a range of kernel virtual memory. */ -extern void bigsur_port_map(u32 baseport, u32 nports, u32 addr, u8 shift); -extern void bigsur_port_unmap(u32 baseport, u32 nports); - -#endif /* _ASM_SH_IO_BIGSUR_H */ - diff --git a/include/asm-sh/bigsur/serial.h b/include/asm-sh/bigsur/serial.h deleted file mode 100644 index a08fa82..0000000 --- a/include/asm-sh/bigsur/serial.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * include/asm-sh/bigsur/serial.h - * - * Configuration details for Big Sur 16550 based serial ports - * i.e. HD64465, PCMCIA, etc. - */ - -#ifndef _ASM_SERIAL_BIGSUR_H -#define _ASM_SERIAL_BIGSUR_H -#include - -#define BASE_BAUD (3379200 / 16) - -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) - - -#define SERIAL_PORT_DFNS \ - /* UART CLK PORT IRQ FLAGS */ \ - { 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS } /* ttyS0 */ - -/* XXX: This should be moved ino irq.h */ -#define irq_cannonicalize(x) (x) - -#endif /* _ASM_SERIAL_BIGSUR_H */ diff --git a/include/asm-sh/ec3104/ec3104.h b/include/asm-sh/ec3104/ec3104.h deleted file mode 100644 index 639cfa4..0000000 --- a/include/asm-sh/ec3104/ec3104.h +++ /dev/null @@ -1,43 +0,0 @@ -#ifndef __ASM_EC3104_H -#define __ASM_EC3104_H - - -/* - * Most of the register set is at 0xb0ec0000 - 0xb0ecffff. - * - * as far as I've figured it out the register map is: - * 0xb0ec0000 - id string - * 0xb0ec0XXX - power management - * 0xb0ec1XXX - interrupt control - * 0xb0ec3XXX - ps2 port (touch pad on aero 8000) - * 0xb0ec6XXX - i2c - * 0xb0ec7000 - first serial port (proprietary connector on aero 8000) - * 0xb0ec8000 - second serial port - * 0xb0ec9000 - third serial port - * 0xb0eca000 - fourth serial port (keyboard controller on aero 8000) - * 0xb0eccXXX - GPIO - * 0xb0ecdXXX - GPIO - */ - -#define EC3104_BASE 0xb0ec0000 - -#define EC3104_SER4_DATA (EC3104_BASE+0xa000) -#define EC3104_SER4_IIR (EC3104_BASE+0xa008) -#define EC3104_SER4_MCR (EC3104_BASE+0xa010) -#define EC3104_SER4_LSR (EC3104_BASE+0xa014) -#define EC3104_SER4_MSR (EC3104_BASE+0xa018) - -/* - * our ISA bus. this seems to be real ISA. - */ -#define EC3104_ISA_BASE 0xa5000000 - -#define EC3104_IRQ 11 -#define EC3104_IRQBASE 64 - -#define EC3104_IRQ_SER1 EC3104_IRQBASE + 7 -#define EC3104_IRQ_SER2 EC3104_IRQBASE + 8 -#define EC3104_IRQ_SER3 EC3104_IRQBASE + 9 -#define EC3104_IRQ_SER4 EC3104_IRQBASE + 10 - -#endif /* __ASM_EC3104_H */ diff --git a/include/asm-sh/ec3104/io.h b/include/asm-sh/ec3104/io.h deleted file mode 100644 index ea5c8e6..0000000 --- a/include/asm-sh/ec3104/io.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef _ASM_SH_IO_EC3104_H -#define _ASM_SH_IO_EC3104_H - -#include - -extern unsigned char ec3104_inb(unsigned long port); -extern unsigned short ec3104_inw(unsigned long port); -extern unsigned long ec3104_inl(unsigned long port); - -extern void ec3104_outb(unsigned char value, unsigned long port); -extern void ec3104_outw(unsigned short value, unsigned long port); -extern void ec3104_outl(unsigned long value, unsigned long port); - -extern int ec3104_irq_demux(int irq); - -#endif /* _ASM_SH_IO_EC3104_H */ diff --git a/include/asm-sh/ec3104/keyboard.h b/include/asm-sh/ec3104/keyboard.h deleted file mode 100644 index c1253a6..0000000 --- a/include/asm-sh/ec3104/keyboard.h +++ /dev/null @@ -1,15 +0,0 @@ -extern unsigned char ec3104_kbd_sysrq_xlate[]; -extern int ec3104_kbd_setkeycode(unsigned int scancode, unsigned int keycode); -extern int ec3104_kbd_getkeycode(unsigned int scancode); -extern int ec3104_kbd_translate(unsigned char, unsigned char *, char); -extern char ec3104_kbd_unexpected_up(unsigned char); -extern void ec3104_kbd_leds(unsigned char); -extern void ec3104_kbd_init_hw(void); - -#define kbd_sysrq_xlate ec3104_kbd_sysrq_xlate -#define kbd_setkeycode ec3104_kbd_setkeycode -#define kbd_getkeycode ec3104_kbd_getkeycode -#define kbd_translate ec3104_kbd_translate -#define kbd_unexpected_up ec3104_kbd_unexpected_up -#define kbd_leds ec3104_kbd_leds -#define kbd_init_hw ec3104_kbd_init_hw diff --git a/include/asm-sh/ec3104/serial.h b/include/asm-sh/ec3104/serial.h deleted file mode 100644 index cfe4d78..0000000 --- a/include/asm-sh/ec3104/serial.h +++ /dev/null @@ -1,20 +0,0 @@ -#include -/* Naturally we don't know the exact value but 115200 baud has a divisor - * of 9 and 19200 baud has a divisor of 52, so this seems like a good - * guess. */ -#define BASE_BAUD (16800000 / 16) - -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) - -/* there is a fourth serial port with the expected values as well, but - * it's got the keyboard controller behind it so we can't really use it - * (without moving the keyboard driver to userspace, which doesn't sound - * like a very good idea) */ -#define SERIAL_PORT_DFNS \ - /* UART CLK PORT IRQ FLAGS */ \ - { 0, BASE_BAUD, 0x11C00, EC3104_IRQBASE+7, STD_COM_FLAGS }, /* ttyS0 */ \ - { 0, BASE_BAUD, 0x12000, EC3104_IRQBASE+8, STD_COM_FLAGS }, /* ttyS1 */ \ - { 0, BASE_BAUD, 0x12400, EC3104_IRQBASE+9, STD_COM_FLAGS }, /* ttyS2 */ - -/* XXX: This should be moved ino irq.h */ -#define irq_cannonicalize(x) (x) diff --git a/include/asm-sh/irq.h b/include/asm-sh/irq.h index bff965e..8ccf7ae 100644 --- a/include/asm-sh/irq.h +++ b/include/asm-sh/irq.h @@ -66,12 +66,8 @@ /* 3. OFFCHIP_NR_IRQS */ #if defined(CONFIG_HD64461) # define OFFCHIP_NR_IRQS 18 -#elif defined (CONFIG_SH_BIGSUR) /* must be before CONFIG_HD64465 */ -# define OFFCHIP_NR_IRQS 48 #elif defined(CONFIG_HD64465) # define OFFCHIP_NR_IRQS 16 -#elif defined (CONFIG_SH_EC3104) -# define OFFCHIP_NR_IRQS 16 #elif defined (CONFIG_SH_DREAMCAST) # define OFFCHIP_NR_IRQS 96 #elif defined (CONFIG_SH_TITAN) diff --git a/include/asm-sh/serial.h b/include/asm-sh/serial.h index 8734590..4ac0e78 100644 --- a/include/asm-sh/serial.h +++ b/include/asm-sh/serial.h @@ -9,11 +9,6 @@ #include -#ifdef CONFIG_SH_EC3104 -#include -#elif defined (CONFIG_SH_BIGSUR) -#include -#else /* * This assumes you have a 1.8432 MHz clock for your UART. * @@ -41,5 +36,4 @@ #endif -#endif #endif /* _ASM_SERIAL_H */ -- cgit v0.10.2 From 9e507abd87103b5263bb0bbd94a15d74004557e9 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 8 Feb 2007 17:50:10 +0100 Subject: [ALSA] hda-codec - Fix Oops with probing sigmatel codec chips When a device is unkown, the driver tries to set up the codec based on the BIOS information. Then it may result in Oops if BIOS is broken. The patch fixes the issue, falling back to a reference model in such a case. Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 6f4a392..2535c1a 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -1800,6 +1800,7 @@ static int patch_stac925x(struct hda_codec *codec) spec->board_config = snd_hda_check_board_config(codec, STAC_925x_MODELS, stac925x_models, stac925x_cfg_tbl); + again: if (spec->board_config < 0) { snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC925x, using BIOS defaults\n"); err = stac92xx_save_bios_config_regs(codec); @@ -1825,6 +1826,15 @@ static int patch_stac925x(struct hda_codec *codec) spec->mixer = stac925x_mixer; err = stac92xx_parse_auto_config(codec, 0x8, 0x7); + if (!err) { + if (spec->board_config < 0) { + printk(KERN_WARNING "hda_codec: No auto-config is " + "available, default to model=ref\n"); + spec->board_config = STAC_925x_REF; + goto again; + } + err = -EINVAL; + } if (err < 0) { stac92xx_free(codec); return err; @@ -1850,6 +1860,7 @@ static int patch_stac922x(struct hda_codec *codec) spec->board_config = snd_hda_check_board_config(codec, STAC_922X_MODELS, stac922x_models, stac922x_cfg_tbl); + again: if (spec->board_config < 0) { snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC922x, " "using BIOS defaults\n"); @@ -1875,6 +1886,15 @@ static int patch_stac922x(struct hda_codec *codec) spec->multiout.dac_nids = spec->dac_nids; err = stac92xx_parse_auto_config(codec, 0x08, 0x09); + if (!err) { + if (spec->board_config < 0) { + printk(KERN_WARNING "hda_codec: No auto-config is " + "available, default to model=ref\n"); + spec->board_config = STAC_D945_REF; + goto again; + } + err = -EINVAL; + } if (err < 0) { stac92xx_free(codec); return err; @@ -1903,6 +1923,7 @@ static int patch_stac927x(struct hda_codec *codec) spec->board_config = snd_hda_check_board_config(codec, STAC_927X_MODELS, stac927x_models, stac927x_cfg_tbl); + again: if (spec->board_config < 0) { snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC927x, using BIOS defaults\n"); err = stac92xx_save_bios_config_regs(codec); @@ -1945,6 +1966,15 @@ static int patch_stac927x(struct hda_codec *codec) spec->multiout.dac_nids = spec->dac_nids; err = stac92xx_parse_auto_config(codec, 0x1e, 0x20); + if (!err) { + if (spec->board_config < 0) { + printk(KERN_WARNING "hda_codec: No auto-config is " + "available, default to model=ref\n"); + spec->board_config = STAC_D965_REF; + goto again; + } + err = -EINVAL; + } if (err < 0) { stac92xx_free(codec); return err; @@ -1970,6 +2000,7 @@ static int patch_stac9205(struct hda_codec *codec) spec->board_config = snd_hda_check_board_config(codec, STAC_9205_MODELS, stac9205_models, stac9205_cfg_tbl); + again: if (spec->board_config < 0) { snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC9205, using BIOS defaults\n"); err = stac92xx_save_bios_config_regs(codec); @@ -2008,6 +2039,15 @@ static int patch_stac9205(struct hda_codec *codec) AC_VERB_SET_GPIO_MASK, 0x00000001); err = stac92xx_parse_auto_config(codec, 0x1f, 0x20); + if (!err) { + if (spec->board_config < 0) { + printk(KERN_WARNING "hda_codec: No auto-config is " + "available, default to model=ref\n"); + spec->board_config = STAC_9205_REF; + goto again; + } + err = -EINVAL; + } if (err < 0) { stac92xx_free(codec); return err; -- cgit v0.10.2 From 9e292c0013d7d4158169eb9786aa0f9816eb5b40 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 9 Feb 2007 12:42:03 +0100 Subject: [ALSA] ac97 - Fix silent output problem with Cx20551 codec Fixed the silent output problem on laptops with Conexant Cx20551 codec chip, such as Packard-bell EasyNote A* series. The information was taken from ALSA bug#1134. Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c index 74ed810..a9eec2a 100644 --- a/sound/pci/ac97/ac97_codec.c +++ b/sound/pci/ac97/ac97_codec.c @@ -143,6 +143,7 @@ static const struct ac97_codec_id snd_ac97_codec_ids[] = { { 0x43525970, 0xfffffff8, "CS4202", NULL, NULL }, { 0x43585421, 0xffffffff, "HSD11246", NULL, NULL }, // SmartMC II { 0x43585428, 0xfffffff8, "Cx20468", patch_conexant, NULL }, // SmartAMC fixme: the mask might be different +{ 0x43585431, 0xffffffff, "Cx20551", patch_cx20551, NULL }, { 0x44543031, 0xfffffff0, "DT0398", NULL, NULL }, { 0x454d4328, 0xffffffff, "EM28028", NULL, NULL }, // same as TR28028? { 0x45838308, 0xffffffff, "ESS1988", NULL, NULL }, diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c index 641d0c8..bfc2fed 100644 --- a/sound/pci/ac97/ac97_patch.c +++ b/sound/pci/ac97/ac97_patch.c @@ -1338,6 +1338,12 @@ int patch_conexant(struct snd_ac97 * ac97) return 0; } +int patch_cx20551(struct snd_ac97 *ac97) +{ + snd_ac97_update_bits(ac97, 0x5c, 0x01, 0x01); + return 0; +} + /* * Analog Device AD18xx, AD19xx codecs */ diff --git a/sound/pci/ac97/ac97_patch.h b/sound/pci/ac97/ac97_patch.h index 94340da..555d1c9 100644 --- a/sound/pci/ac97/ac97_patch.h +++ b/sound/pci/ac97/ac97_patch.h @@ -39,6 +39,7 @@ int patch_sigmatel_stac9758(struct snd_ac97 * ac97); int patch_cirrus_cs4299(struct snd_ac97 * ac97); int patch_cirrus_spdif(struct snd_ac97 * ac97); int patch_conexant(struct snd_ac97 * ac97); +int patch_cx20551(struct snd_ac97 * ac97); int patch_ad1819(struct snd_ac97 * ac97); int patch_ad1881(struct snd_ac97 * ac97); int patch_ad1885(struct snd_ac97 * ac97); -- cgit v0.10.2 From 596f967f501799f87fded9e296ce0b14cd233674 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Fri, 9 Feb 2007 12:54:44 +0100 Subject: [ALSA] usbaudio - remove urb->bandwidth reference Recent changes in usbcore removed the bandwidth field from struct urb. Remove the occurence in usbaudio.c Signed-off-by: Jiri Kosina Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index 4dfb91d..b6d8863 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -325,16 +325,6 @@ static int prepare_capture_urb(struct snd_usb_substream *subs, } urb->transfer_buffer_length = offs; urb->number_of_packets = ctx->packets; -#if 0 // for check - if (! urb->bandwidth) { - int bustime; - bustime = usb_check_bandwidth(urb->dev, urb); - if (bustime < 0) - return bustime; - printk("urb %d: bandwidth = %d (packets = %d)\n", ctx->index, bustime, urb->number_of_packets); - usb_claim_bandwidth(urb->dev, urb, bustime, 1); - } -#endif // for check return 0; } -- cgit v0.10.2 From 5dc5ebb7bc143fe38a56b9dd9c1d89220e20694a Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Fri, 9 Feb 2007 20:51:55 +0100 Subject: [ALSA] emu10k1: fix typo fix a typo Signed-off-by: Clemens Ladisch Signed-off-by: Jaroslav Kysela diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h index eb7ce96..23e45a4 100644 --- a/include/sound/emu10k1.h +++ b/include/sound/emu10k1.h @@ -628,7 +628,7 @@ #define FXWC_SPDIFLEFT (1<<22) /* 0x00400000 */ #define FXWC_SPDIFRIGHT (1<<23) /* 0x00800000 */ -#define A_TBLSZ ` 0x43 /* Effects Tank Internal Table Size. Only low byte or register used */ +#define A_TBLSZ 0x43 /* Effects Tank Internal Table Size. Only low byte or register used */ #define TCBS 0x44 /* Tank cache buffer size register */ #define TCBS_MASK 0x00000007 /* Tank cache buffer size field */ -- cgit v0.10.2 From f38cc317c0a7279bb725ec5c2251726eab3c722b Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Fri, 9 Feb 2007 20:52:55 +0100 Subject: [ALSA] usb-audio: add PCR-A PCM support Add support for the PCM interfaces of the Edirol PCR-A. Signed-off-by: Clemens Ladisch Signed-off-by: Jaroslav Kysela diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h index 25b4ab4..8582620 100644 --- a/sound/usb/usbquirks.h +++ b/sound/usb/usbquirks.h @@ -948,6 +948,29 @@ YAMAHA_DEVICE(0x7010, "UB99"), }, /* TODO: add Edirol M-100FX support */ { + /* has ID 0x004e when not in "Advanced Driver" mode */ + USB_DEVICE(0x0582, 0x004c), + .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + .vendor_name = "EDIROL", + .product_name = "PCR-A", + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_COMPOSITE, + .data = (const struct snd_usb_audio_quirk[]) { + { + .ifnum = 1, + .type = QUIRK_AUDIO_STANDARD_INTERFACE + }, + { + .ifnum = 2, + .type = QUIRK_AUDIO_STANDARD_INTERFACE + }, + { + .ifnum = -1 + } + } + } +}, +{ /* has ID 0x004f when not in "Advanced Driver" mode */ USB_DEVICE(0x0582, 0x004d), .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { -- cgit v0.10.2 From 82f30040ada635d5d42a244b6eb84607d9881f5a Mon Sep 17 00:00:00 2001 From: Tobin Davis Date: Tue, 13 Feb 2007 12:45:44 +0100 Subject: [ALSA] hda-codec - More fixes for Conexant HD Audio support Renamed Conexant 5045 to CX20549 (Venice) per Conexant Documentation Renamed Conexant 5047 to CX20551 (Waikiki) per Conexant Documentation Fixed automute on HP Laptops with CX20551 codec. Fixed recording issues on Toshiba Satelite P100/P105 series laptops Added HP DV8000, DV2000Z, Fujitsu Si1520 support More work to be done on CX20549 based systems, but CX20551 Systems are much better now. Signed-off-by: Tobin Davis Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 73f4668..23a1c75 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -57,6 +57,7 @@ struct conexant_spec { * dig_out_nid and hp_nid are optional */ unsigned int cur_eapd; + unsigned int hp_present; unsigned int need_dac_fix; /* capture */ @@ -354,7 +355,7 @@ static struct hda_codec_ops conexant_patch_ops = { * the private value = nid | (invert << 8) */ -static int conexant_eapd_info(struct snd_kcontrol *kcontrol, +static int cxt_eapd_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; @@ -364,7 +365,7 @@ static int conexant_eapd_info(struct snd_kcontrol *kcontrol, return 0; } -static int conexant_eapd_get(struct snd_kcontrol *kcontrol, +static int cxt_eapd_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); @@ -375,9 +376,10 @@ static int conexant_eapd_get(struct snd_kcontrol *kcontrol, else ucontrol->value.integer.value[0] = spec->cur_eapd; return 0; + } -static int conexant_eapd_put(struct snd_kcontrol *kcontrol, +static int cxt_eapd_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); @@ -385,11 +387,13 @@ static int conexant_eapd_put(struct snd_kcontrol *kcontrol, int invert = (kcontrol->private_value >> 8) & 1; hda_nid_t nid = kcontrol->private_value & 0xff; unsigned int eapd; + eapd = ucontrol->value.integer.value[0]; if (invert) eapd = !eapd; if (eapd == spec->cur_eapd && !codec->in_resume) return 0; + spec->cur_eapd = eapd; snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_EAPD_BTLENABLE, @@ -400,6 +404,15 @@ static int conexant_eapd_put(struct snd_kcontrol *kcontrol, /* controls for test mode */ #ifdef CONFIG_SND_DEBUG +#define CXT_EAPD_SWITCH(xname, nid, mask) \ + { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \ + .info = cxt_eapd_info, \ + .get = cxt_eapd_get, \ + .put = cxt_eapd_put, \ + .private_value = nid | (mask<<16) } + + + static int conexant_ch_mode_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { @@ -492,7 +505,7 @@ static int cxt_gpio_data_put(struct snd_kcontrol *kcontrol, .get = cxt_gpio_data_get, \ .put = cxt_gpio_data_put, \ .private_value = nid | (mask<<16) } - +#if 0 static int cxt_spdif_ctrl_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { @@ -547,7 +560,7 @@ static int cxt_spdif_ctrl_put(struct snd_kcontrol *kcontrol, .get = cxt_spdif_ctrl_get, \ .put = cxt_spdif_ctrl_put, \ .private_value = nid | (mask<<16) } - +#endif #endif /* CONFIG_SND_DEBUG */ /* Conexant 5045 specific */ @@ -564,7 +577,7 @@ static struct hda_channel_mode cxt5045_modes[1] = { static struct hda_input_mux cxt5045_capture_source = { .num_items = 2, .items = { - { "ExtMic", 0x1 }, + { "IntMic", 0x1 }, { "LineIn", 0x2 }, } }; @@ -575,15 +588,20 @@ static int cxt5045_hp_master_sw_put(struct snd_kcontrol *kcontrol, { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct conexant_spec *spec = codec->spec; + unsigned int bits; - if (!conexant_eapd_put(kcontrol, ucontrol)) + if (!cxt_eapd_put(kcontrol, ucontrol)) return 0; - /* toggle HP mute appropriately */ - snd_hda_codec_amp_update(codec, 0x11, 0, HDA_OUTPUT, 0, - 0x80, spec->cur_eapd ? 0 : 0x80); - snd_hda_codec_amp_update(codec, 0x11, 1, HDA_OUTPUT, 0, - 0x80, spec->cur_eapd ? 0 : 0x80); + /* toggle internal speakers mute depending of presence of + * the headphone jack + */ + bits = (!spec->hp_present && spec->cur_eapd) ? 0 : 0x80; + snd_hda_codec_amp_update(codec, 0x10, 0, HDA_OUTPUT, 0, 0x80, bits); + snd_hda_codec_amp_update(codec, 0x10, 1, HDA_OUTPUT, 0, 0x80, bits); + bits = spec->cur_eapd ? 0 : 0x80; + snd_hda_codec_amp_update(codec, 0x11, 0, HDA_OUTPUT, 0, 0x80, bits); + snd_hda_codec_amp_update(codec, 0x11, 1, HDA_OUTPUT, 0, 0x80, bits); return 1; } @@ -610,14 +628,13 @@ static int cxt5045_hp_master_vol_put(struct snd_kcontrol *kcontrol, /* mute internal speaker if HP is plugged */ static void cxt5045_hp_automute(struct hda_codec *codec) { - unsigned int present; + struct conexant_spec *spec = codec->spec; + unsigned int bits = (spec->hp_present || !spec->cur_eapd) ? 0x80 : 0; - present = snd_hda_codec_read(codec, 0x11, 0, + spec->hp_present = snd_hda_codec_read(codec, 0x11, 0, AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; - snd_hda_codec_amp_update(codec, 0x10, 0, HDA_OUTPUT, 0, - 0x80, present ? 0x80 : 0); - snd_hda_codec_amp_update(codec, 0x10, 1, HDA_OUTPUT, 0, - 0x80, present ? 0x80 : 0); + snd_hda_codec_amp_update(codec, 0x10, 0, HDA_OUTPUT, 0, 0x80, bits); + snd_hda_codec_amp_update(codec, 0x10, 1, HDA_OUTPUT, 0, 0x80, bits); } /* unsolicited event for HP jack sensing */ @@ -640,25 +657,27 @@ static struct snd_kcontrol_new cxt5045_mixers[] = { .get = conexant_mux_enum_get, .put = conexant_mux_enum_put }, - HDA_CODEC_VOLUME("Mic Bypass Capture Volume", 0x17, 0x02, HDA_INPUT), - HDA_CODEC_MUTE("Mic Bypass Capture Switch", 0x17, 0x02, HDA_INPUT), - HDA_CODEC_VOLUME("Capture Volume", 0x1a, 0x02, HDA_INPUT), - HDA_CODEC_MUTE("Capture Switch", 0x1a, 0x02, HDA_INPUT), + HDA_CODEC_VOLUME("Int Mic Volume", 0x17, 0x01, HDA_INPUT), + HDA_CODEC_MUTE("Int Mic Switch", 0x17, 0x01, HDA_INPUT), + HDA_CODEC_VOLUME("Ext Mic Volume", 0x17, 0x02, HDA_INPUT), + HDA_CODEC_MUTE("Ext Mic Switch", 0x17, 0x02, HDA_INPUT), + HDA_CODEC_VOLUME("Capture Volume", 0x1a, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Capture Switch", 0x1a, 0x0, HDA_INPUT), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Master Playback Volume", .info = snd_hda_mixer_amp_volume_info, .get = snd_hda_mixer_amp_volume_get, .put = cxt5045_hp_master_vol_put, - .private_value = HDA_COMPOSE_AMP_VAL(0x11, 3, 0, HDA_OUTPUT), + .private_value = HDA_COMPOSE_AMP_VAL(0x10, 3, 0, HDA_OUTPUT), }, { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Master Playback Switch", - .info = conexant_eapd_info, - .get = conexant_eapd_get, + .info = cxt_eapd_info, + .get = cxt_eapd_get, .put = cxt5045_hp_master_sw_put, - .private_value = 0x11, + .private_value = 0x10, }, {} @@ -669,22 +688,26 @@ static struct hda_verb cxt5045_init_verbs[] = { {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN }, {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN|AC_PINCTL_VREF_50 }, /* HP, Amp */ - {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, - {0x1A, AC_VERB_SET_CONNECT_SEL,0x01}, - {0x1A, AC_VERB_SET_AMP_GAIN_MUTE, - AC_AMP_SET_OUTPUT|AC_AMP_SET_RIGHT|AC_AMP_SET_LEFT|0x00}, - {0x1A, AC_VERB_SET_AMP_GAIN_MUTE, + {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP }, + {0x17, AC_VERB_SET_CONNECT_SEL,0x01}, + {0x17, AC_VERB_SET_AMP_GAIN_MUTE, + AC_AMP_SET_OUTPUT|AC_AMP_SET_RIGHT|AC_AMP_SET_LEFT|0x01}, + {0x17, AC_VERB_SET_AMP_GAIN_MUTE, + AC_AMP_SET_OUTPUT|AC_AMP_SET_RIGHT|AC_AMP_SET_LEFT|0x02}, + {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AC_AMP_SET_OUTPUT|AC_AMP_SET_RIGHT|AC_AMP_SET_LEFT|0x03}, - /* Record selector: Front mic */ - {0x14, AC_VERB_SET_CONNECT_SEL,0x03}, {0x17, AC_VERB_SET_AMP_GAIN_MUTE, + AC_AMP_SET_OUTPUT|AC_AMP_SET_RIGHT|AC_AMP_SET_LEFT|0x04}, + /* Record selector: Int mic */ + {0x1a, AC_VERB_SET_CONNECT_SEL,0x0}, + {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AC_AMP_SET_INPUT|AC_AMP_SET_RIGHT|AC_AMP_SET_LEFT|0x17}, /* SPDIF route: PCM */ { 0x13, AC_VERB_SET_CONNECT_SEL, 0x0 }, /* pin sensing on HP and Mic jacks */ {0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | CONEXANT_HP_EVENT}, /* EAPD */ - {0x10, AC_VERB_SET_EAPD_BTLENABLE, 0x0 }, /* default on */ + {0x10, AC_VERB_SET_EAPD_BTLENABLE, 0x2 }, /* default on */ { } /* end */ }; @@ -706,8 +729,6 @@ static struct hda_input_mux cxt5045_test_capture_source = { static struct snd_kcontrol_new cxt5045_test_mixer[] = { /* Output controls */ - HDA_CODEC_VOLUME("OutAmp-1 Volume", 0x19, 0x00, HDA_OUTPUT), - HDA_CODEC_MUTE("OutAmp-1 Switch", 0x19,0x00, HDA_OUTPUT), HDA_CODEC_VOLUME("Speaker Playback Volume", 0x10, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Speaker Playback Switch", 0x10, 0x0, HDA_OUTPUT), @@ -715,6 +736,9 @@ static struct snd_kcontrol_new cxt5045_test_mixer[] = { CXT_PIN_MODE("HP-OUT pin mode", 0x11, CXT_PIN_DIR_INOUT), CXT_PIN_MODE("LINE1 pin mode", 0x12, CXT_PIN_DIR_INOUT), + /* EAPD Switch Control */ + CXT_EAPD_SWITCH("External Amplifier", 0x10, 0x0), + /* Loopback mixer controls */ HDA_CODEC_VOLUME("MIC1 Playback Volume", 0x17, 0x01, HDA_INPUT), HDA_CODEC_MUTE("MIC1 Playback Switch", 0x17, 0x01, HDA_INPUT), @@ -725,17 +749,16 @@ static struct snd_kcontrol_new cxt5045_test_mixer[] = { HDA_CODEC_VOLUME("CD Playback Volume", 0x17, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x17, 0x04, HDA_INPUT), - /* Controls for GPIO pins, assuming they exist and are configured as outputs */ - CXT_GPIO_DATA_SWITCH("GPIO pin 0", 0x01, 0x01), -#if 0 /* limit this to one GPIO pin for now */ - CXT_GPIO_DATA_SWITCH("GPIO pin 1", 0x01, 0x02), - CXT_GPIO_DATA_SWITCH("GPIO pin 2", 0x01, 0x04), - CXT_GPIO_DATA_SWITCH("GPIO pin 3", 0x01, 0x08), -#endif - CXT_SPDIF_CTRL_SWITCH("SPDIF Playback Switch", 0x13, 0x01), - - HDA_CODEC_VOLUME("Capture Volume", 0x17, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("Capture Switch", 0x17, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("Capture-1 Volume", 0x17, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Capture-1 Switch", 0x17, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("Capture-2 Volume", 0x17, 0x1, HDA_INPUT), + HDA_CODEC_MUTE("Capture-2 Switch", 0x17, 0x1, HDA_INPUT), + HDA_CODEC_VOLUME("Capture-3 Volume", 0x17, 0x2, HDA_INPUT), + HDA_CODEC_MUTE("Capture-3 Switch", 0x17, 0x2, HDA_INPUT), + HDA_CODEC_VOLUME("Capture-4 Volume", 0x17, 0x3, HDA_INPUT), + HDA_CODEC_MUTE("Capture-4 Switch", 0x17, 0x3, HDA_INPUT), + HDA_CODEC_VOLUME("Capture-5 Volume", 0x17, 0x4, HDA_INPUT), + HDA_CODEC_MUTE("Capture-5 Switch", 0x17, 0x4, HDA_INPUT), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Input Source", @@ -748,14 +771,9 @@ static struct snd_kcontrol_new cxt5045_test_mixer[] = { }; static struct hda_verb cxt5045_test_init_verbs[] = { - /* Enable all GPIOs as outputs with an initial value of 0 */ - {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x0f}, - {0x01, AC_VERB_SET_GPIO_DATA, 0x00}, - {0x01, AC_VERB_SET_GPIO_MASK, 0x0f}, - /* Enable retasking pins as output, initially without power amp */ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, /* Disable digital (SPDIF) pins initially, but users can enable * them via a mixer switch. In the case of SPDIF-out, this initverb @@ -823,6 +841,8 @@ static const char *cxt5045_models[CXT5045_MODELS] = { static struct snd_pci_quirk cxt5045_cfg_tbl[] = { SND_PCI_QUIRK(0x103c, 0x30b7, "HP DV6000Z", CXT5045_LAPTOP), + SND_PCI_QUIRK(0x103c, 0x30bb, "HP DV8000", CXT5045_LAPTOP), + SND_PCI_QUIRK(0x1734, 0x10ad, "Fujitsu Si1520", CXT5045_LAPTOP), {} }; @@ -880,11 +900,11 @@ static int patch_cxt5045(struct hda_codec *codec) /* Conexant 5047 specific */ +#define CXT5047_SPDIF_OUT 0x11 -static hda_nid_t cxt5047_dac_nids[1] = { 0x10 }; +static hda_nid_t cxt5047_dac_nids[2] = { 0x10, 0x1c }; static hda_nid_t cxt5047_adc_nids[1] = { 0x12 }; static hda_nid_t cxt5047_capsrc_nids[1] = { 0x1a }; -#define CXT5047_SPDIF_OUT 0x11 static struct hda_channel_mode cxt5047_modes[1] = { { 2, NULL }, @@ -893,15 +913,23 @@ static struct hda_channel_mode cxt5047_modes[1] = { static struct hda_input_mux cxt5047_capture_source = { .num_items = 2, .items = { - { "ExtMic", 0x1 }, - { "IntMic", 0x2 }, + { "ExtMic", 0x0 }, + { "IntMic", 0x1 }, } }; static struct hda_input_mux cxt5047_hp_capture_source = { .num_items = 1, .items = { - { "ExtMic", 0x1 }, + { "ExtMic", 0x2 }, + } +}; + +static struct hda_input_mux cxt5047_toshiba_capture_source = { + .num_items = 2, + .items = { + { "ExtMic", 0x2 }, + { "Line-In", 0x1 }, } }; @@ -911,20 +939,24 @@ static int cxt5047_hp_master_sw_put(struct snd_kcontrol *kcontrol, { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct conexant_spec *spec = codec->spec; + unsigned int bits; - if (!conexant_eapd_put(kcontrol, ucontrol)) + if (!cxt_eapd_put(kcontrol, ucontrol)) return 0; - /* toggle HP mute appropriately */ - snd_hda_codec_amp_update(codec, 0x13, 0, HDA_OUTPUT, 0, - 0x80, spec->cur_eapd ? 0 : 0x80); - snd_hda_codec_amp_update(codec, 0x13, 1, HDA_OUTPUT, 0, - 0x80, spec->cur_eapd ? 0 : 0x80); + /* toggle internal speakers mute depending of presence of + * the headphone jack + */ + bits = (!spec->hp_present && spec->cur_eapd) ? 0 : 0x80; + snd_hda_codec_amp_update(codec, 0x1d, 0, HDA_OUTPUT, 0, 0x80, bits); + snd_hda_codec_amp_update(codec, 0x1d, 1, HDA_OUTPUT, 0, 0x80, bits); + bits = spec->cur_eapd ? 0 : 0x80; + snd_hda_codec_amp_update(codec, 0x13, 0, HDA_OUTPUT, 0, 0x80, bits); + snd_hda_codec_amp_update(codec, 0x13, 1, HDA_OUTPUT, 0, 0x80, bits); return 1; } -#if 0 -/* bind volumes of both NID 0x13 and 0x1d */ +/* bind volumes of both NID 0x13 (Headphones) and 0x1d (Speakers) */ static int cxt5047_hp_master_vol_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { @@ -932,9 +964,9 @@ static int cxt5047_hp_master_vol_put(struct snd_kcontrol *kcontrol, long *valp = ucontrol->value.integer.value; int change; - change = snd_hda_codec_amp_update(codec, 0x1c, 0, HDA_OUTPUT, 0, + change = snd_hda_codec_amp_update(codec, 0x1d, 0, HDA_OUTPUT, 0, 0x7f, valp[0] & 0x7f); - change |= snd_hda_codec_amp_update(codec, 0x1c, 1, HDA_OUTPUT, 0, + change |= snd_hda_codec_amp_update(codec, 0x1d, 1, HDA_OUTPUT, 0, 0x7f, valp[1] & 0x7f); snd_hda_codec_amp_update(codec, 0x13, 0, HDA_OUTPUT, 0, 0x7f, valp[0] & 0x7f); @@ -942,19 +974,20 @@ static int cxt5047_hp_master_vol_put(struct snd_kcontrol *kcontrol, 0x7f, valp[1] & 0x7f); return change; } -#endif /* mute internal speaker if HP is plugged */ static void cxt5047_hp_automute(struct hda_codec *codec) { - unsigned int present; + struct conexant_spec *spec = codec->spec; + unsigned int bits = spec->hp_present || !spec->cur_eapd ? 0x80 : 0; - present = snd_hda_codec_read(codec, 0x13, 0, + spec->hp_present = snd_hda_codec_read(codec, 0x13, 0, AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; - snd_hda_codec_amp_update(codec, 0x1c, 0, HDA_OUTPUT, 0, - 0x80, present ? 0x80 : 0); - snd_hda_codec_amp_update(codec, 0x1c, 1, HDA_OUTPUT, 0, - 0x80, present ? 0x80 : 0); + snd_hda_codec_amp_update(codec, 0x1d, 0, HDA_OUTPUT, 0, 0x80, bits); + snd_hda_codec_amp_update(codec, 0x1d, 1, HDA_OUTPUT, 0, 0x80, bits); + /* Mute/Unmute PCM 2 for good measure - some systems need this */ + snd_hda_codec_amp_update(codec, 0x1c, 0, HDA_OUTPUT, 0, 0x80, bits); + snd_hda_codec_amp_update(codec, 0x1c, 1, HDA_OUTPUT, 0, 0x80, bits); } /* toggle input of built-in and mic jack appropriately */ @@ -1009,12 +1042,55 @@ static struct snd_kcontrol_new cxt5047_mixers[] = { HDA_CODEC_MUTE("Capture Switch", 0x12, 0x03, HDA_INPUT), HDA_CODEC_VOLUME("PCM Volume", 0x10, 0x00, HDA_OUTPUT), HDA_CODEC_MUTE("PCM Switch", 0x10, 0x00, HDA_OUTPUT), - HDA_CODEC_VOLUME("Master Playback Volume", 0x13, 0x00, HDA_OUTPUT), + HDA_CODEC_VOLUME("PCM-2 Volume", 0x1c, 0x00, HDA_OUTPUT), + HDA_CODEC_MUTE("PCM-2 Switch", 0x1c, 0x00, HDA_OUTPUT), + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Master Playback Volume", + .info = snd_hda_mixer_amp_volume_info, + .get = snd_hda_mixer_amp_volume_get, + .put = cxt5047_hp_master_vol_put, + .private_value = HDA_COMPOSE_AMP_VAL(0x13, 3, 0, HDA_OUTPUT), + }, { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Master Playback Switch", - .info = conexant_eapd_info, - .get = conexant_eapd_get, + .info = cxt_eapd_info, + .get = cxt_eapd_get, + .put = cxt5047_hp_master_sw_put, + .private_value = 0x13, + }, + + {} +}; + +static struct snd_kcontrol_new cxt5047_toshiba_mixers[] = { + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Capture Source", + .info = conexant_mux_enum_info, + .get = conexant_mux_enum_get, + .put = conexant_mux_enum_put + }, + HDA_CODEC_VOLUME("Mic Bypass Capture Volume", 0x19, 0x02, HDA_INPUT), + HDA_CODEC_MUTE("Mic Bypass Capture Switch", 0x19, 0x02, HDA_INPUT), + HDA_CODEC_VOLUME("Capture Volume", 0x12, 0x03, HDA_INPUT), + HDA_CODEC_MUTE("Capture Switch", 0x12, 0x03, HDA_INPUT), + HDA_CODEC_VOLUME("PCM Volume", 0x10, 0x00, HDA_OUTPUT), + HDA_CODEC_MUTE("PCM Switch", 0x10, 0x00, HDA_OUTPUT), + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Master Playback Volume", + .info = snd_hda_mixer_amp_volume_info, + .get = snd_hda_mixer_amp_volume_get, + .put = cxt5047_hp_master_vol_put, + .private_value = HDA_COMPOSE_AMP_VAL(0x13, 3, 0, HDA_OUTPUT), + }, + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Master Playback Switch", + .info = cxt_eapd_info, + .get = cxt_eapd_get, .put = cxt5047_hp_master_sw_put, .private_value = 0x13, }, @@ -1040,8 +1116,8 @@ static struct snd_kcontrol_new cxt5047_hp_mixers[] = { { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Master Playback Switch", - .info = conexant_eapd_info, - .get = conexant_eapd_get, + .info = cxt_eapd_info, + .get = cxt_eapd_get, .put = cxt5047_hp_master_sw_put, .private_value = 0x13, }, @@ -1053,19 +1129,23 @@ static struct hda_verb cxt5047_init_verbs[] = { {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN }, {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN|AC_PINCTL_VREF_50 }, {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN|AC_PINCTL_VREF_50 }, - /* HP, Amp */ + /* HP, Amp, Speaker */ {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, - {0x1A, AC_VERB_SET_CONNECT_SEL,0x03}, + {0x1A, AC_VERB_SET_CONNECT_SEL,0x00}, {0x1A, AC_VERB_SET_AMP_GAIN_MUTE, AC_AMP_SET_OUTPUT|AC_AMP_SET_RIGHT|AC_AMP_SET_LEFT|0x00}, {0x1A, AC_VERB_SET_AMP_GAIN_MUTE, AC_AMP_SET_OUTPUT|AC_AMP_SET_RIGHT|AC_AMP_SET_LEFT|0x03}, + {0x1d, AC_VERB_SET_CONNECT_SEL,0x0}, /* Record selector: Front mic */ {0x12, AC_VERB_SET_CONNECT_SEL,0x03}, {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AC_AMP_SET_INPUT|AC_AMP_SET_RIGHT|AC_AMP_SET_LEFT|0x17}, /* SPDIF route: PCM */ { 0x18, AC_VERB_SET_CONNECT_SEL, 0x0 }, + /* Enable unsolicited events */ + {0x13, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | CONEXANT_HP_EVENT}, + {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | CONEXANT_MIC_EVENT}, { } /* end */ }; @@ -1075,14 +1155,24 @@ static struct hda_verb cxt5047_toshiba_init_verbs[] = { /* pin sensing on HP and Mic jacks */ {0x13, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | CONEXANT_HP_EVENT}, {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | CONEXANT_MIC_EVENT}, + /* Speaker routing */ + {0x1d, AC_VERB_SET_CONNECT_SEL,0x1}, + /* Change default to ExtMic for recording */ + {0x1a, AC_VERB_SET_CONNECT_SEL,0x2}, {} }; /* configuration for HP Laptops */ static struct hda_verb cxt5047_hp_init_verbs[] = { - /* pin sensing on HP and Mic jacks */ + /* pin sensing on HP jack */ {0x13, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | CONEXANT_HP_EVENT}, - {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | CONEXANT_MIC_EVENT}, + /* Record selector: Ext Mic */ + {0x12, AC_VERB_SET_CONNECT_SEL,0x03}, + {0x1a, AC_VERB_SET_CONNECT_SEL,0x02}, + {0x19, AC_VERB_SET_AMP_GAIN_MUTE, + AC_AMP_SET_INPUT|AC_AMP_SET_RIGHT|AC_AMP_SET_LEFT|0x17}, + /* Speaker routing */ + {0x1d, AC_VERB_SET_CONNECT_SEL,0x1}, {} }; @@ -1091,53 +1181,56 @@ static struct hda_verb cxt5047_hp_init_verbs[] = { */ #ifdef CONFIG_SND_DEBUG static struct hda_input_mux cxt5047_test_capture_source = { - .num_items = 5, + .num_items = 4, .items = { - { "MIXER", 0x0 }, - { "LINE1 pin", 0x1 }, - { "MIC1 pin", 0x2 }, - { "MIC2 pin", 0x3 }, - { "CD pin", 0x4 }, + { "LINE1 pin", 0x0 }, + { "MIC1 pin", 0x1 }, + { "MIC2 pin", 0x2 }, + { "CD pin", 0x3 }, }, }; static struct snd_kcontrol_new cxt5047_test_mixer[] = { /* Output only controls */ - HDA_CODEC_VOLUME("OutAmp-1 Volume", 0x10, 0x00, HDA_OUTPUT), - HDA_CODEC_MUTE("OutAmp-1 Switch", 0x10,0x00, HDA_OUTPUT), - HDA_CODEC_VOLUME("OutAmp-2 Volume", 0x1c, 0x00, HDA_OUTPUT), - HDA_CODEC_MUTE("OutAmp-2 Switch", 0x1c, 0x00, HDA_OUTPUT), + HDA_CODEC_VOLUME("OutAmp-1 Volume", 0x10, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("OutAmp-1 Switch", 0x10,0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("OutAmp-2 Volume", 0x1c, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("OutAmp-2 Switch", 0x1c, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("Speaker Playback Volume", 0x1d, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Speaker Playback Switch", 0x1d, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("HeadPhone Playback Volume", 0x13, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("HeadPhone Playback Switch", 0x13, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("Line1-Out Playback Volume", 0x14, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Line1-Out Playback Switch", 0x14, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("Line2-Out Playback Volume", 0x15, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Line2-Out Playback Switch", 0x15, 0x0, HDA_OUTPUT), /* Modes for retasking pin widgets */ CXT_PIN_MODE("LINE1 pin mode", 0x14, CXT_PIN_DIR_INOUT), CXT_PIN_MODE("MIC1 pin mode", 0x15, CXT_PIN_DIR_INOUT), - /* Loopback mixer controls */ - HDA_CODEC_VOLUME("MIC1 Playback Volume", 0x19, 0x02, HDA_INPUT), - HDA_CODEC_MUTE("MIC1 Playback Switch", 0x19, 0x02, HDA_INPUT), - HDA_CODEC_VOLUME("MIC2 Playback Volume", 0x19, 0x03, HDA_INPUT), - HDA_CODEC_MUTE("MIC2 Playback Switch", 0x19, 0x03, HDA_INPUT), - HDA_CODEC_VOLUME("LINE Playback Volume", 0x19, 0x01, HDA_INPUT), - HDA_CODEC_MUTE("LINE Playback Switch", 0x19, 0x01, HDA_INPUT), - HDA_CODEC_VOLUME("CD Playback Volume", 0x19, 0x04, HDA_INPUT), - HDA_CODEC_MUTE("CD Playback Switch", 0x19, 0x04, HDA_INPUT), - -#if 0 - /* Controls for GPIO pins, assuming they exist and are configured as outputs */ - CXT_GPIO_DATA_SWITCH("GPIO pin 0", 0x01, 0x01), - CXT_GPIO_DATA_SWITCH("GPIO pin 1", 0x01, 0x02), - CXT_GPIO_DATA_SWITCH("GPIO pin 2", 0x01, 0x04), - CXT_GPIO_DATA_SWITCH("GPIO pin 3", 0x01, 0x08), -#endif - CXT_SPDIF_CTRL_SWITCH("SPDIF Playback Switch", 0x18, 0x01), + /* EAPD Switch Control */ + CXT_EAPD_SWITCH("External Amplifier", 0x13, 0x0), - HDA_CODEC_VOLUME("Capture Volume", 0x19, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("Capture Switch", 0x19, 0x0, HDA_OUTPUT), + /* Loopback mixer controls */ + HDA_CODEC_VOLUME("MIC1 Playback Volume", 0x12, 0x01, HDA_INPUT), + HDA_CODEC_MUTE("MIC1 Playback Switch", 0x12, 0x01, HDA_INPUT), + HDA_CODEC_VOLUME("MIC2 Playback Volume", 0x12, 0x02, HDA_INPUT), + HDA_CODEC_MUTE("MIC2 Playback Switch", 0x12, 0x02, HDA_INPUT), + HDA_CODEC_VOLUME("LINE Playback Volume", 0x12, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("LINE Playback Switch", 0x12, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("CD Playback Volume", 0x12, 0x04, HDA_INPUT), + HDA_CODEC_MUTE("CD Playback Switch", 0x12, 0x04, HDA_INPUT), + + HDA_CODEC_VOLUME("Capture-1 Volume", 0x19, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Capture-1 Switch", 0x19, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("Capture-2 Volume", 0x19, 0x1, HDA_INPUT), + HDA_CODEC_MUTE("Capture-2 Switch", 0x19, 0x1, HDA_INPUT), + HDA_CODEC_VOLUME("Capture-3 Volume", 0x19, 0x2, HDA_INPUT), + HDA_CODEC_MUTE("Capture-3 Switch", 0x19, 0x2, HDA_INPUT), + HDA_CODEC_VOLUME("Capture-4 Volume", 0x19, 0x3, HDA_INPUT), + HDA_CODEC_MUTE("Capture-4 Switch", 0x19, 0x3, HDA_INPUT), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Input Source", @@ -1145,16 +1238,18 @@ static struct snd_kcontrol_new cxt5047_test_mixer[] = { .get = conexant_mux_enum_get, .put = conexant_mux_enum_put, }, + /* Controls for GPIO pins, assuming they exist and are configured + * as outputs + */ + CXT_GPIO_DATA_SWITCH("GPIO pin 0", 0x01, 0x01), + CXT_GPIO_DATA_SWITCH("GPIO pin 1", 0x01, 0x02), + CXT_GPIO_DATA_SWITCH("GPIO pin 2", 0x01, 0x04), + CXT_GPIO_DATA_SWITCH("GPIO pin 3", 0x01, 0x08), { } /* end */ }; static struct hda_verb cxt5047_test_init_verbs[] = { - /* Enable all GPIOs as outputs with an initial value of 0 */ - {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x0f}, - {0x01, AC_VERB_SET_GPIO_DATA, 0x00}, - {0x01, AC_VERB_SET_GPIO_MASK, 0x0f}, - /* Enable retasking pins as output, initially without power amp */ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, @@ -1215,7 +1310,6 @@ static int cxt5047_hp_init(struct hda_codec *codec) { conexant_init(codec); cxt5047_hp_automute(codec); - cxt5047_hp_automic(codec); return 0; } @@ -1242,6 +1336,7 @@ static const char *cxt5047_models[CXT5047_MODELS] = { static struct snd_pci_quirk cxt5047_cfg_tbl[] = { SND_PCI_QUIRK(0x103c, 0x30a0, "HP DV1000", CXT5047_LAPTOP), SND_PCI_QUIRK(0x103c, 0x30b2, "HP DV2000T/DV3000T", CXT5047_LAPTOP), + SND_PCI_QUIRK(0x103c, 0x30b5, "HP DV2000Z", CXT5047_LAPTOP), SND_PCI_QUIRK(0x103c, 0x30a5, "HP DV5200T/DV8000T", CXT5047_LAPTOP_HP), SND_PCI_QUIRK(0x1179, 0xff31, "Toshiba P100", CXT5047_LAPTOP_EAPD), {} @@ -1291,8 +1386,10 @@ static int patch_cxt5047(struct hda_codec *codec) codec->patch_ops.init = cxt5047_hp_init; break; case CXT5047_LAPTOP_EAPD: + spec->input_mux = &cxt5047_toshiba_capture_source; spec->num_init_verbs = 2; spec->init_verbs[1] = cxt5047_toshiba_init_verbs; + spec->mixers[0] = cxt5047_toshiba_mixers; break; #ifdef CONFIG_SND_DEBUG case CXT5047_TEST: @@ -1305,7 +1402,9 @@ static int patch_cxt5047(struct hda_codec *codec) } struct hda_codec_preset snd_hda_preset_conexant[] = { - { .id = 0x14f15045, .name = "CXT5045", .patch = patch_cxt5045 }, - { .id = 0x14f15047, .name = "CXT5047", .patch = patch_cxt5047 }, + { .id = 0x14f15045, .name = "CX20549 (Venice)", + .patch = patch_cxt5045 }, + { .id = 0x14f15047, .name = "CX20551 (Waikiki)", + .patch = patch_cxt5047 }, {} /* terminator */ }; -- cgit v0.10.2 From 46f02ca36e9b2b690ebcef18fa0652c586d6c08e Mon Sep 17 00:00:00 2001 From: Mikael Nilsson Date: Tue, 13 Feb 2007 12:46:16 +0100 Subject: [ALSA] hda-codec - Patch for enabling LFE on more Dell laptops Fix LFE controls for Dell Inspiron E1705/9400 and XPS M1710 laptops. Signed-off-by: Mikael Nilsson Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 2535c1a..f7ef9c5 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -457,6 +457,10 @@ static struct snd_pci_quirk stac9200_cfg_tbl[] = { "Dell Latitude 120L", STAC_REF), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01cc, "Dell Latitude D820", STAC_REF), + SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01cd, + "Dell Inspiron E1705/9400", STAC_REF), + SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01ce, + "Dell XPS M1710", STAC_REF), {} /* terminator */ }; -- cgit v0.10.2 From 788c6043335590e0a483fdc18f85b1405a157bf9 Mon Sep 17 00:00:00 2001 From: Prarit Bhargava Date: Tue, 13 Feb 2007 13:11:11 +0100 Subject: [ALSA] Fix __devinit and __devexit issues with sound drivers Fix __devinit and __devexit issues with sound drivers. Resolves MODPOST warnings similar to: WARNING: sound/drivers/snd-dummy.o - Section mismatch: reference to .init.text:snd_dummy_probe from .data.rel.local between 'snd_dummy_driver' (at offset 0x0) and 'snd_dummy_controls' WARNING: sound/drivers/snd-mtpav.o - Section mismatch: reference to .init.text:snd_mtpav_probe from .data.rel.local between 'snd_mtpav_driver' (at offset 0x0) and 'snd_mtpav_input' WARNING: sound/drivers/snd-virmidi.o - Section mismatch: reference to .init.text:snd_virmidi_probe from .data.rel.local after 'snd_virmidi_driver' (at offset 0x0) Signed-off-by: Prarit Bhargava Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c index dede954..28db4be 100644 --- a/sound/arm/pxa2xx-ac97.c +++ b/sound/arm/pxa2xx-ac97.c @@ -305,7 +305,7 @@ static int pxa2xx_ac97_resume(struct platform_device *dev) #define pxa2xx_ac97_resume NULL #endif -static int pxa2xx_ac97_probe(struct platform_device *dev) +static int __devinit pxa2xx_ac97_probe(struct platform_device *dev) { struct snd_card *card; struct snd_ac97_bus *ac97_bus; @@ -369,7 +369,7 @@ static int pxa2xx_ac97_probe(struct platform_device *dev) return ret; } -static int pxa2xx_ac97_remove(struct platform_device *dev) +static int __devexit pxa2xx_ac97_remove(struct platform_device *dev) { struct snd_card *card = platform_get_drvdata(dev); @@ -386,7 +386,7 @@ static int pxa2xx_ac97_remove(struct platform_device *dev) static struct platform_driver pxa2xx_ac97_driver = { .probe = pxa2xx_ac97_probe, - .remove = pxa2xx_ac97_remove, + .remove = __devexit_p(pxa2xx_ac97_remove), .suspend = pxa2xx_ac97_suspend, .resume = pxa2xx_ac97_resume, .driver = { diff --git a/sound/drivers/dummy.c b/sound/drivers/dummy.c index 8339bad..a0f28f5 100644 --- a/sound/drivers/dummy.c +++ b/sound/drivers/dummy.c @@ -423,7 +423,8 @@ static struct snd_pcm_ops snd_card_dummy_capture_ops = { .pointer = snd_card_dummy_pcm_pointer, }; -static int __init snd_card_dummy_pcm(struct snd_dummy *dummy, int device, int substreams) +static int __devinit snd_card_dummy_pcm(struct snd_dummy *dummy, int device, + int substreams) { struct snd_pcm *pcm; int err; @@ -562,7 +563,7 @@ DUMMY_VOLUME("CD Volume", 0, MIXER_ADDR_CD), DUMMY_CAPSRC("CD Capture Switch", 0, MIXER_ADDR_CD) }; -static int __init snd_card_dummy_new_mixer(struct snd_dummy *dummy) +static int __devinit snd_card_dummy_new_mixer(struct snd_dummy *dummy) { struct snd_card *card = dummy->card; unsigned int idx; @@ -579,7 +580,7 @@ static int __init snd_card_dummy_new_mixer(struct snd_dummy *dummy) return 0; } -static int __init snd_dummy_probe(struct platform_device *devptr) +static int __devinit snd_dummy_probe(struct platform_device *devptr) { struct snd_card *card; struct snd_dummy *dummy; @@ -617,7 +618,7 @@ static int __init snd_dummy_probe(struct platform_device *devptr) return err; } -static int snd_dummy_remove(struct platform_device *devptr) +static int __devexit snd_dummy_remove(struct platform_device *devptr) { snd_card_free(platform_get_drvdata(devptr)); platform_set_drvdata(devptr, NULL); @@ -648,7 +649,7 @@ static int snd_dummy_resume(struct platform_device *pdev) static struct platform_driver snd_dummy_driver = { .probe = snd_dummy_probe, - .remove = snd_dummy_remove, + .remove = __devexit_p(snd_dummy_remove), #ifdef CONFIG_PM .suspend = snd_dummy_suspend, .resume = snd_dummy_resume, diff --git a/sound/drivers/mtpav.c b/sound/drivers/mtpav.c index a9ff391..40eb026 100644 --- a/sound/drivers/mtpav.c +++ b/sound/drivers/mtpav.c @@ -583,7 +583,7 @@ static irqreturn_t snd_mtpav_irqh(int irq, void *dev_id) /* * get ISA resources */ -static int __init snd_mtpav_get_ISA(struct mtpav * mcard) +static int __devinit snd_mtpav_get_ISA(struct mtpav * mcard) { if ((mcard->res_port = request_region(port, 3, "MotuMTPAV MIDI")) == NULL) { snd_printk("MTVAP port 0x%lx is busy\n", port); @@ -619,7 +619,7 @@ static struct snd_rawmidi_ops snd_mtpav_input = { * get RAWMIDI resources */ -static void __init snd_mtpav_set_name(struct mtpav *chip, +static void __devinit snd_mtpav_set_name(struct mtpav *chip, struct snd_rawmidi_substream *substream) { if (substream->number >= 0 && substream->number < chip->num_ports) @@ -634,7 +634,7 @@ static void __init snd_mtpav_set_name(struct mtpav *chip, strcpy(substream->name, "MTP broadcast"); } -static int __init snd_mtpav_get_RAWMIDI(struct mtpav *mcard) +static int __devinit snd_mtpav_get_RAWMIDI(struct mtpav *mcard) { int rval; struct snd_rawmidi *rawmidi; @@ -691,7 +691,7 @@ static void snd_mtpav_free(struct snd_card *card) /* */ -static int __init snd_mtpav_probe(struct platform_device *dev) +static int __devinit snd_mtpav_probe(struct platform_device *dev) { struct snd_card *card; int err; @@ -745,7 +745,7 @@ static int __init snd_mtpav_probe(struct platform_device *dev) return err; } -static int snd_mtpav_remove(struct platform_device *devptr) +static int __devexit snd_mtpav_remove(struct platform_device *devptr) { snd_card_free(platform_get_drvdata(devptr)); platform_set_drvdata(devptr, NULL); @@ -756,7 +756,7 @@ static int snd_mtpav_remove(struct platform_device *devptr) static struct platform_driver snd_mtpav_driver = { .probe = snd_mtpav_probe, - .remove = snd_mtpav_remove, + .remove = __devexit_p(snd_mtpav_remove), .driver = { .name = SND_MTPAV_DRIVER }, diff --git a/sound/drivers/mts64.c b/sound/drivers/mts64.c index 5327c6f..6c9f4c9 100644 --- a/sound/drivers/mts64.c +++ b/sound/drivers/mts64.c @@ -1026,7 +1026,7 @@ __err: return err; } -static int snd_mts64_remove(struct platform_device *pdev) +static int __devexit snd_mts64_remove(struct platform_device *pdev) { struct snd_card *card = platform_get_drvdata(pdev); @@ -1039,7 +1039,7 @@ static int snd_mts64_remove(struct platform_device *pdev) static struct platform_driver snd_mts64_driver = { .probe = snd_mts64_probe, - .remove = snd_mts64_remove, + .remove = __devexit_p(snd_mts64_remove), .driver = { .name = PLATFORM_DRIVER } @@ -1048,7 +1048,7 @@ static struct platform_driver snd_mts64_driver = { /********************************************************************* * module init stuff *********************************************************************/ -static void snd_mts64_unregister_all(void) +static void __init_or_module snd_mts64_unregister_all(void) { int i; diff --git a/sound/drivers/portman2x4.c b/sound/drivers/portman2x4.c index 6c48772..b43d4c9 100644 --- a/sound/drivers/portman2x4.c +++ b/sound/drivers/portman2x4.c @@ -811,7 +811,7 @@ __err: return err; } -static int snd_portman_remove(struct platform_device *pdev) +static int __devexit snd_portman_remove(struct platform_device *pdev) { struct snd_card *card = platform_get_drvdata(pdev); @@ -824,7 +824,7 @@ static int snd_portman_remove(struct platform_device *pdev) static struct platform_driver snd_portman_driver = { .probe = snd_portman_probe, - .remove = snd_portman_remove, + .remove = __dev_exit_p(snd_portman_remove), .driver = { .name = PLATFORM_DRIVER } @@ -833,7 +833,7 @@ static struct platform_driver snd_portman_driver = { /********************************************************************* * module init stuff *********************************************************************/ -static void snd_portman_unregister_all(void) +static void __init_or_module snd_portman_unregister_all(void) { int i; diff --git a/sound/drivers/serial-u16550.c b/sound/drivers/serial-u16550.c index 3a86a58..838a427 100644 --- a/sound/drivers/serial-u16550.c +++ b/sound/drivers/serial-u16550.c @@ -327,7 +327,7 @@ static void snd_uart16550_buffer_timer(unsigned long data) * return 0 if found * return negative error if not found */ -static int __init snd_uart16550_detect(struct snd_uart16550 *uart) +static int __devinit snd_uart16550_detect(struct snd_uart16550 *uart) { unsigned long io_base = uart->base; int ok; @@ -781,7 +781,7 @@ static int snd_uart16550_dev_free(struct snd_device *device) return snd_uart16550_free(uart); } -static int __init snd_uart16550_create(struct snd_card *card, +static int __devinit snd_uart16550_create(struct snd_card *card, unsigned long iobase, int irq, unsigned int speed, @@ -860,7 +860,7 @@ static int __init snd_uart16550_create(struct snd_card *card, return 0; } -static void __init snd_uart16550_substreams(struct snd_rawmidi_str *stream) +static void __devinit snd_uart16550_substreams(struct snd_rawmidi_str *stream) { struct snd_rawmidi_substream *substream; @@ -869,7 +869,7 @@ static void __init snd_uart16550_substreams(struct snd_rawmidi_str *stream) } } -static int __init snd_uart16550_rmidi(struct snd_uart16550 *uart, int device, +static int __devinit snd_uart16550_rmidi(struct snd_uart16550 *uart, int device, int outs, int ins, struct snd_rawmidi **rmidi) { @@ -896,7 +896,7 @@ static int __init snd_uart16550_rmidi(struct snd_uart16550 *uart, int device, return 0; } -static int __init snd_serial_probe(struct platform_device *devptr) +static int __devinit snd_serial_probe(struct platform_device *devptr) { struct snd_card *card; struct snd_uart16550 *uart; @@ -981,7 +981,7 @@ static int __init snd_serial_probe(struct platform_device *devptr) return err; } -static int snd_serial_remove(struct platform_device *devptr) +static int __devexit snd_serial_remove(struct platform_device *devptr) { snd_card_free(platform_get_drvdata(devptr)); platform_set_drvdata(devptr, NULL); @@ -992,7 +992,7 @@ static int snd_serial_remove(struct platform_device *devptr) static struct platform_driver snd_serial_driver = { .probe = snd_serial_probe, - .remove = snd_serial_remove, + .remove = __devexit_p( snd_serial_remove), .driver = { .name = SND_SERIAL_DRIVER }, diff --git a/sound/drivers/virmidi.c b/sound/drivers/virmidi.c index 59171f8..70e70ba 100644 --- a/sound/drivers/virmidi.c +++ b/sound/drivers/virmidi.c @@ -85,7 +85,7 @@ struct snd_card_virmidi { static struct platform_device *devices[SNDRV_CARDS]; -static int __init snd_virmidi_probe(struct platform_device *devptr) +static int __devinit snd_virmidi_probe(struct platform_device *devptr) { struct snd_card *card; struct snd_card_virmidi *vmidi; @@ -129,7 +129,7 @@ static int __init snd_virmidi_probe(struct platform_device *devptr) return err; } -static int snd_virmidi_remove(struct platform_device *devptr) +static int __devexit snd_virmidi_remove(struct platform_device *devptr) { snd_card_free(platform_get_drvdata(devptr)); platform_set_drvdata(devptr, NULL); @@ -140,7 +140,7 @@ static int snd_virmidi_remove(struct platform_device *devptr) static struct platform_driver snd_virmidi_driver = { .probe = snd_virmidi_probe, - .remove = snd_virmidi_remove, + .remove = __devexit_p(snd_virmidi_remove), .driver = { .name = SND_VIRMIDI_DRIVER }, diff --git a/sound/isa/ad1848/ad1848.c b/sound/isa/ad1848/ad1848.c index 99908e4..74e501d 100644 --- a/sound/isa/ad1848/ad1848.c +++ b/sound/isa/ad1848/ad1848.c @@ -65,7 +65,7 @@ MODULE_PARM_DESC(thinkpad, "Enable only for the onboard CS4248 of IBM Thinkpad 3 static struct platform_device *devices[SNDRV_CARDS]; -static int __init snd_ad1848_probe(struct platform_device *pdev) +static int __devinit snd_ad1848_probe(struct platform_device *pdev) { int dev = pdev->id; struct snd_card *card; diff --git a/sound/isa/cmi8330.c b/sound/isa/cmi8330.c index d1f6dfc..c09a800 100644 --- a/sound/isa/cmi8330.c +++ b/sound/isa/cmi8330.c @@ -574,7 +574,7 @@ static int __devinit snd_cmi8330_nonpnp_probe(struct platform_device *pdev) return 0; } -static int snd_cmi8330_nonpnp_remove(struct platform_device *devptr) +static int __devexit snd_cmi8330_nonpnp_remove(struct platform_device *devptr) { snd_card_free(platform_get_drvdata(devptr)); platform_set_drvdata(devptr, NULL); @@ -597,7 +597,7 @@ static int snd_cmi8330_nonpnp_resume(struct platform_device *dev) static struct platform_driver snd_cmi8330_driver = { .probe = snd_cmi8330_nonpnp_probe, - .remove = snd_cmi8330_nonpnp_remove, + .remove = __devexit_p(snd_cmi8330_nonpnp_remove), #ifdef CONFIG_PM .suspend = snd_cmi8330_nonpnp_suspend, .resume = snd_cmi8330_nonpnp_resume, diff --git a/sound/isa/es1688/es1688.c b/sound/isa/es1688/es1688.c index 7f29f56..65f97ff 100644 --- a/sound/isa/es1688/es1688.c +++ b/sound/isa/es1688/es1688.c @@ -73,7 +73,7 @@ static struct platform_device *devices[SNDRV_CARDS]; #define PFX "es1688: " -static int __init snd_es1688_probe(struct platform_device *pdev) +static int __devinit snd_es1688_probe(struct platform_device *pdev) { int dev = pdev->id; static int possible_irqs[] = {5, 9, 10, 7, -1}; @@ -171,7 +171,7 @@ static int __init snd_es1688_probe(struct platform_device *pdev) return err; } -static int snd_es1688_remove(struct platform_device *devptr) +static int __devexit snd_es1688_remove(struct platform_device *devptr) { snd_card_free(platform_get_drvdata(devptr)); platform_set_drvdata(devptr, NULL); @@ -182,7 +182,7 @@ static int snd_es1688_remove(struct platform_device *devptr) static struct platform_driver snd_es1688_driver = { .probe = snd_es1688_probe, - .remove = snd_es1688_remove, + .remove = __devexit_p(snd_es1688_remove), /* FIXME: suspend/resume */ .driver = { .name = ES1688_DRIVER diff --git a/sound/isa/gus/gusclassic.c b/sound/isa/gus/gusclassic.c index 37057a3..0395e2e 100644 --- a/sound/isa/gus/gusclassic.c +++ b/sound/isa/gus/gusclassic.c @@ -76,7 +76,7 @@ static struct platform_device *devices[SNDRV_CARDS]; #define PFX "gusclassic: " -static int __init snd_gusclassic_detect(struct snd_gus_card * gus) +static int __devinit snd_gusclassic_detect(struct snd_gus_card * gus) { unsigned char d; @@ -95,7 +95,7 @@ static int __init snd_gusclassic_detect(struct snd_gus_card * gus) return 0; } -static void __init snd_gusclassic_init(int dev, struct snd_gus_card * gus) +static void __devinit snd_gusclassic_init(int dev, struct snd_gus_card * gus) { gus->equal_irq = 0; gus->codec_flag = 0; @@ -103,7 +103,7 @@ static void __init snd_gusclassic_init(int dev, struct snd_gus_card * gus) gus->joystick_dac = joystick_dac[dev]; } -static int __init snd_gusclassic_probe(struct platform_device *pdev) +static int __devinit snd_gusclassic_probe(struct platform_device *pdev) { int dev = pdev->id; static int possible_irqs[] = {5, 11, 12, 9, 7, 15, 3, 4, -1}; @@ -211,7 +211,7 @@ static int __init snd_gusclassic_probe(struct platform_device *pdev) return err; } -static int snd_gusclassic_remove(struct platform_device *devptr) +static int __devexit snd_gusclassic_remove(struct platform_device *devptr) { snd_card_free(platform_get_drvdata(devptr)); platform_set_drvdata(devptr, NULL); @@ -222,7 +222,7 @@ static int snd_gusclassic_remove(struct platform_device *devptr) static struct platform_driver snd_gusclassic_driver = { .probe = snd_gusclassic_probe, - .remove = snd_gusclassic_remove, + .remove = __devexit_p(snd_gusclassic_remove), /* FIXME: suspend/resume */ .driver = { .name = GUSCLASSIC_DRIVER diff --git a/sound/isa/gus/gusextreme.c b/sound/isa/gus/gusextreme.c index 532c56e..4f55fc3 100644 --- a/sound/isa/gus/gusextreme.c +++ b/sound/isa/gus/gusextreme.c @@ -92,7 +92,7 @@ static struct platform_device *devices[SNDRV_CARDS]; #define PFX "gusextreme: " -static int __init snd_gusextreme_detect(int dev, +static int __devinit snd_gusextreme_detect(int dev, struct snd_card *card, struct snd_gus_card * gus, struct snd_es1688 *es1688) @@ -142,12 +142,12 @@ static int __init snd_gusextreme_detect(int dev, return 0; } -static void __init snd_gusextreme_init(int dev, struct snd_gus_card * gus) +static void __devinit snd_gusextreme_init(int dev, struct snd_gus_card * gus) { gus->joystick_dac = joystick_dac[dev]; } -static int __init snd_gusextreme_mixer(struct snd_es1688 *chip) +static int __devinit snd_gusextreme_mixer(struct snd_es1688 *chip) { struct snd_card *card = chip->card; struct snd_ctl_elem_id id1, id2; @@ -169,7 +169,7 @@ static int __init snd_gusextreme_mixer(struct snd_es1688 *chip) return 0; } -static int __init snd_gusextreme_probe(struct platform_device *pdev) +static int __devinit snd_gusextreme_probe(struct platform_device *pdev) { int dev = pdev->id; static int possible_ess_irqs[] = {5, 9, 10, 7, -1}; @@ -321,7 +321,7 @@ static int __init snd_gusextreme_probe(struct platform_device *pdev) return err; } -static int snd_gusextreme_remove(struct platform_device *devptr) +static int __devexit snd_gusextreme_remove(struct platform_device *devptr) { snd_card_free(platform_get_drvdata(devptr)); platform_set_drvdata(devptr, NULL); @@ -332,7 +332,7 @@ static int snd_gusextreme_remove(struct platform_device *devptr) static struct platform_driver snd_gusextreme_driver = { .probe = snd_gusextreme_probe, - .remove = snd_gusextreme_remove, + .remove = __devexit_p(snd_gusextreme_remove), /* FIXME: suspend/resume */ .driver = { .name = GUSEXTREME_DRIVER diff --git a/sound/isa/gus/gusmax.c b/sound/isa/gus/gusmax.c index c1c69e3..d1ad90c 100644 --- a/sound/isa/gus/gusmax.c +++ b/sound/isa/gus/gusmax.c @@ -85,7 +85,7 @@ struct snd_gusmax { #define PFX "gusmax: " -static int __init snd_gusmax_detect(struct snd_gus_card * gus) +static int __devinit snd_gusmax_detect(struct snd_gus_card * gus) { unsigned char d; @@ -127,7 +127,8 @@ static irqreturn_t snd_gusmax_interrupt(int irq, void *dev_id) return IRQ_RETVAL(handled); } -static void __init snd_gusmax_init(int dev, struct snd_card *card, struct snd_gus_card * gus) +static void __devinit snd_gusmax_init(int dev, struct snd_card *card, + struct snd_gus_card * gus) { gus->equal_irq = 1; gus->codec_flag = 1; @@ -145,7 +146,7 @@ static void __init snd_gusmax_init(int dev, struct snd_card *card, struct snd_gu #define CS4231_PRIVATE( left, right, shift, mute ) \ ((left << 24)|(right << 16)|(shift<<8)|mute) -static int __init snd_gusmax_mixer(struct snd_cs4231 *chip) +static int __devinit snd_gusmax_mixer(struct snd_cs4231 *chip) { struct snd_card *card = chip->card; struct snd_ctl_elem_id id1, id2; @@ -204,7 +205,7 @@ static void snd_gusmax_free(struct snd_card *card) free_irq(maxcard->irq, (void *)maxcard); } -static int __init snd_gusmax_probe(struct platform_device *pdev) +static int __devinit snd_gusmax_probe(struct platform_device *pdev) { int dev = pdev->id; static int possible_irqs[] = {5, 11, 12, 9, 7, 15, 3, -1}; @@ -348,7 +349,7 @@ static int __init snd_gusmax_probe(struct platform_device *pdev) return err; } -static int snd_gusmax_remove(struct platform_device *devptr) +static int __devexit snd_gusmax_remove(struct platform_device *devptr) { snd_card_free(platform_get_drvdata(devptr)); platform_set_drvdata(devptr, NULL); @@ -359,7 +360,7 @@ static int snd_gusmax_remove(struct platform_device *devptr) static struct platform_driver snd_gusmax_driver = { .probe = snd_gusmax_probe, - .remove = snd_gusmax_remove, + .remove = __devexit_p(snd_gusmax_remove), /* FIXME: suspend/resume */ .driver = { .name = GUSMAX_DRIVER diff --git a/sound/isa/opl3sa2.c b/sound/isa/opl3sa2.c index 1e30713..f3db686 100644 --- a/sound/isa/opl3sa2.c +++ b/sound/isa/opl3sa2.c @@ -919,7 +919,7 @@ static int __devinit snd_opl3sa2_nonpnp_probe(struct platform_device *pdev) return 0; } -static int snd_opl3sa2_nonpnp_remove(struct platform_device *devptr) +static int __devexit snd_opl3sa2_nonpnp_remove(struct platform_device *devptr) { snd_card_free(platform_get_drvdata(devptr)); platform_set_drvdata(devptr, NULL); @@ -942,7 +942,7 @@ static int snd_opl3sa2_nonpnp_resume(struct platform_device *dev) static struct platform_driver snd_opl3sa2_nonpnp_driver = { .probe = snd_opl3sa2_nonpnp_probe, - .remove = snd_opl3sa2_nonpnp_remove, + .remove = __devexit( snd_opl3sa2_nonpnp_remove), #ifdef CONFIG_PM .suspend = snd_opl3sa2_nonpnp_suspend, .resume = snd_opl3sa2_nonpnp_resume, diff --git a/sound/isa/sb/sb8.c b/sound/isa/sb/sb8.c index 268ebd3..be1e83e 100644 --- a/sound/isa/sb/sb8.c +++ b/sound/isa/sb/sb8.c @@ -83,7 +83,7 @@ static void snd_sb8_free(struct snd_card *card) release_and_free_resource(acard->fm_res); } -static int __init snd_sb8_probe(struct platform_device *pdev) +static int __devinit snd_sb8_probe(struct platform_device *pdev) { int dev = pdev->id; struct snd_sb *chip; @@ -193,7 +193,7 @@ static int __init snd_sb8_probe(struct platform_device *pdev) return err; } -static int snd_sb8_remove(struct platform_device *pdev) +static int __devexit snd_sb8_remove(struct platform_device *pdev) { snd_card_free(platform_get_drvdata(pdev)); platform_set_drvdata(pdev, NULL); @@ -230,7 +230,7 @@ static int snd_sb8_resume(struct platform_device *dev) static struct platform_driver snd_sb8_driver = { .probe = snd_sb8_probe, - .remove = snd_sb8_remove, + .remove = __devexit_p(snd_sb8_remove), #ifdef CONFIG_PM .suspend = snd_sb8_suspend, .resume = snd_sb8_resume, -- cgit v0.10.2 From 2a40534348987346dae1c68c225eff7bc19ff529 Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Mon, 22 Jan 2007 12:59:08 +0100 Subject: [ALSA] SoC codecs - fix Kconfig - depends -> depends on Signed-off-by: Jaroslav Kysela diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 78ac268..ec2a278 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -1,15 +1,15 @@ config SND_SOC_AC97_CODEC tristate - depends SND_SOC + depends on SND_SOC config SND_SOC_WM8731 tristate - depends SND_SOC + depends on SND_SOC config SND_SOC_WM8750 tristate - depends SND_SOC + depends on SND_SOC config SND_SOC_WM9712 tristate - depends SND_SOC + depends on SND_SOC -- cgit v0.10.2 From fa8f878701888666c124e21d77bf7f3ba2dd2359 Mon Sep 17 00:00:00 2001 From: Frank Mandarino Date: Mon, 12 Feb 2007 14:06:22 +0100 Subject: [ALSA] Change AT91 PDC register defines for 2.6.20 kernel Use the new PDC register name defines that were updated in Linux 2.6.20. Signed-off-by: Frank Mandarino Signed-off-by: Liam Girdwood Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela diff --git a/sound/soc/at91/at91-i2s.c b/sound/soc/at91/at91-i2s.c index fcc544a..9fc0c03 100644 --- a/sound/soc/at91/at91-i2s.c +++ b/sound/soc/at91/at91-i2s.c @@ -20,6 +20,8 @@ #include #include #include +#include + #include #include #include @@ -29,7 +31,6 @@ #include #include #include -#include #include "at91-pcm.h" #include "at91-i2s.h" @@ -51,17 +52,17 @@ * SSC PDC registers required by the PCM DMA engine. */ static struct at91_pdc_regs pdc_tx_reg = { - .xpr = AT91_PDC_TPR, - .xcr = AT91_PDC_TCR, - .xnpr = AT91_PDC_TNPR, - .xncr = AT91_PDC_TNCR, + .xpr = ATMEL_PDC_TPR, + .xcr = ATMEL_PDC_TCR, + .xnpr = ATMEL_PDC_TNPR, + .xncr = ATMEL_PDC_TNCR, }; static struct at91_pdc_regs pdc_rx_reg = { - .xpr = AT91_PDC_RPR, - .xcr = AT91_PDC_RCR, - .xnpr = AT91_PDC_RNPR, - .xncr = AT91_PDC_RNCR, + .xpr = ATMEL_PDC_RPR, + .xcr = ATMEL_PDC_RCR, + .xnpr = ATMEL_PDC_RNPR, + .xncr = ATMEL_PDC_RNCR, }; /* @@ -72,8 +73,8 @@ static struct at91_ssc_mask ssc_tx_mask = { .ssc_disable = AT91_SSC_TXDIS, .ssc_endx = AT91_SSC_ENDTX, .ssc_endbuf = AT91_SSC_TXBUFE, - .pdc_enable = AT91_PDC_TXTEN, - .pdc_disable = AT91_PDC_TXTDIS, + .pdc_enable = ATMEL_PDC_TXTEN, + .pdc_disable = ATMEL_PDC_TXTDIS, }; static struct at91_ssc_mask ssc_rx_mask = { @@ -81,8 +82,8 @@ static struct at91_ssc_mask ssc_rx_mask = { .ssc_disable = AT91_SSC_RXDIS, .ssc_endx = AT91_SSC_ENDRX, .ssc_endbuf = AT91_SSC_RXBUFF, - .pdc_enable = AT91_PDC_RXTEN, - .pdc_disable = AT91_PDC_RXTDIS, + .pdc_enable = ATMEL_PDC_RXTEN, + .pdc_disable = ATMEL_PDC_RXTDIS, }; @@ -508,14 +509,14 @@ static int at91_i2s_hw_params(struct snd_pcm_substream *substream, /* Reset the SSC and its PDC registers */ at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CR, AT91_SSC_SWRST); - at91_ssc_write(ssc_p->ssc.base + AT91_PDC_RPR, 0); - at91_ssc_write(ssc_p->ssc.base + AT91_PDC_RCR, 0); - at91_ssc_write(ssc_p->ssc.base + AT91_PDC_RNPR, 0); - at91_ssc_write(ssc_p->ssc.base + AT91_PDC_RNCR, 0); - at91_ssc_write(ssc_p->ssc.base + AT91_PDC_TPR, 0); - at91_ssc_write(ssc_p->ssc.base + AT91_PDC_TCR, 0); - at91_ssc_write(ssc_p->ssc.base + AT91_PDC_TNPR, 0); - at91_ssc_write(ssc_p->ssc.base + AT91_PDC_TNCR, 0); + at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RPR, 0); + at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RCR, 0); + at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RNPR, 0); + at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RNCR, 0); + at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TPR, 0); + at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TCR, 0); + at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TNPR, 0); + at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TNCR, 0); if ((ret = request_irq(ssc_p->ssc.pid, at91_i2s_interrupt, 0, ssc_p->name, ssc_p)) < 0) { diff --git a/sound/soc/at91/at91-pcm.c b/sound/soc/at91/at91-pcm.c index e88b12e..b39b95a 100644 --- a/sound/soc/at91/at91-pcm.c +++ b/sound/soc/at91/at91-pcm.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include @@ -30,7 +31,6 @@ #include #include -#include #include "at91-pcm.h" @@ -83,7 +83,7 @@ static void at91_pcm_dma_irq(u32 ssc_sr, params->name, ssc_sr, count); /* re-start the PDC */ - at91_ssc_write(params->ssc_base + AT91_PDC_PTCR, params->mask->pdc_disable); + at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable); prtd->period_ptr += prtd->period_size; if (prtd->period_ptr >= prtd->dma_buffer_end) { @@ -94,7 +94,7 @@ static void at91_pcm_dma_irq(u32 ssc_sr, at91_ssc_write(params->ssc_base + params->pdc->xcr, prtd->period_size / params->pdc_xfer_size); - at91_ssc_write(params->ssc_base + AT91_PDC_PTCR, params->mask->pdc_enable); + at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_enable); } if (ssc_sr & params->mask->ssc_endx) { @@ -143,7 +143,7 @@ static int at91_pcm_hw_free(struct snd_pcm_substream *substream) struct at91_pcm_dma_params *params = prtd->params; if (params != NULL) { - at91_ssc_write(params->ssc_base + AT91_PDC_PTCR, params->mask->pdc_disable); + at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable); prtd->params->dma_intr_handler = NULL; } @@ -158,7 +158,7 @@ static int at91_pcm_prepare(struct snd_pcm_substream *substream) at91_ssc_write(params->ssc_base + AT91_SSC_IDR, params->mask->ssc_endx | params->mask->ssc_endbuf); - at91_ssc_write(params->ssc_base + AT91_PDC_PTCR, params->mask->pdc_disable); + at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable); return 0; } @@ -192,7 +192,7 @@ static int at91_pcm_trigger(struct snd_pcm_substream *substream, at91_ssc_write(params->ssc_base + AT91_SSC_IER, params->mask->ssc_endx | params->mask->ssc_endbuf); - at91_ssc_write(params->ssc_base + AT91_PDC_PTCR, params->mask->pdc_enable); + at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_enable); DBG("sr=%lx imr=%lx\n", at91_ssc_read(params->ssc_base + AT91_SSC_SR), at91_ssc_read(params->ssc_base + AT91_SSC_IER)); @@ -201,12 +201,12 @@ static int at91_pcm_trigger(struct snd_pcm_substream *substream, case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_SUSPEND: case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - at91_ssc_write(params->ssc_base + AT91_PDC_PTCR, params->mask->pdc_disable); + at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable); break; case SNDRV_PCM_TRIGGER_RESUME: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - at91_ssc_write(params->ssc_base + AT91_PDC_PTCR, params->mask->pdc_enable); + at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_enable); break; default: @@ -379,7 +379,7 @@ static int at91_pcm_suspend(struct platform_device *pdev, /* disable the PDC and save the PDC registers */ - at91_ssc_write(params->ssc_base + AT91_PDC_PTCR, params->mask->pdc_disable); + at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable); prtd->pdc_xpr_save = at91_ssc_read(params->ssc_base + params->pdc->xpr); prtd->pdc_xcr_save = at91_ssc_read(params->ssc_base + params->pdc->xcr); @@ -408,7 +408,7 @@ static int at91_pcm_resume(struct platform_device *pdev, at91_ssc_write(params->ssc_base + params->pdc->xnpr, prtd->pdc_xnpr_save); at91_ssc_write(params->ssc_base + params->pdc->xncr, prtd->pdc_xncr_save); - at91_ssc_write(params->ssc_base + AT91_PDC_PTCR, params->mask->pdc_enable); + at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_enable); return 0; } #else -- cgit v0.10.2 From 9879951aa1f499e5f9db92f51cd6e7dfb65e78cb Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 13 Feb 2007 15:53:22 +0100 Subject: [ALSA] Fix a typo in __dev* changes in portman2x4.c Fix a typo in the last __dev* changes in portman2x4.c. Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela diff --git a/sound/drivers/portman2x4.c b/sound/drivers/portman2x4.c index b43d4c9..b2d0ba4 100644 --- a/sound/drivers/portman2x4.c +++ b/sound/drivers/portman2x4.c @@ -824,7 +824,7 @@ static int __devexit snd_portman_remove(struct platform_device *pdev) static struct platform_driver snd_portman_driver = { .probe = snd_portman_probe, - .remove = __dev_exit_p(snd_portman_remove), + .remove = __devexit_p(snd_portman_remove), .driver = { .name = PLATFORM_DRIVER } -- cgit v0.10.2 From ccf2c2229d4473cc1a334200c1b60ab6070adabe Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Wed, 14 Feb 2007 08:42:20 +0100 Subject: [ALSA] version 1.0.14rc2 Signed-off-by: Jaroslav Kysela diff --git a/include/sound/version.h b/include/sound/version.h index c39b380..a9ba7ee 100644 --- a/include/sound/version.h +++ b/include/sound/version.h @@ -1,3 +1,3 @@ /* include/version.h. Generated by alsa/ksync script. */ #define CONFIG_SND_VERSION "1.0.14rc2" -#define CONFIG_SND_DATE " (Fri Feb 09 13:50:10 2007 UTC)" +#define CONFIG_SND_DATE " (Wed Feb 14 07:42:13 2007 UTC)" -- cgit v0.10.2 From b7de8e7e3c7b79a72c20c7fd58bd65df3d146b13 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 14 Feb 2007 00:32:53 -0800 Subject: [PATCH] ia64: fix noncoherent DMA API so devres builds On ia64, drivers/base/dma-mapping.c doesn't build because it calls dma_alloc_noncoherent() and dma_free_noncoherent(), which appear to be terminally broken; the calls end up generating errors like drivers/base/dma-mapping.c: In function 'dmam_noncoherent_release': drivers/base/dma-mapping.c:32: error: 'struct ia64_machine_vector' has no member named 'platform_dma_free_coherent' because the multiple levels of macro expansion in and end up turning a call to dma_free_noncoherent() into ia64_mv.platform_dma_free_coherent (instead of the intended ia64_mv.dma_free_coherent). This patch fixes this by converting dma_{alloc,free}_noncoherent() into inline functions that call the corresponding coherent functions, instead of trying to do this with macros. Signed-off-by: Roland Dreier Acked-by: Tony Luck Cc: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/asm-ia64/dma-mapping.h b/include/asm-ia64/dma-mapping.h index ebd5887..6299b51 100644 --- a/include/asm-ia64/dma-mapping.h +++ b/include/asm-ia64/dma-mapping.h @@ -8,9 +8,20 @@ #include #define dma_alloc_coherent platform_dma_alloc_coherent -#define dma_alloc_noncoherent platform_dma_alloc_coherent /* coherent mem. is cheap */ +/* coherent mem. is cheap */ +static inline void * +dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *dma_handle, + gfp_t flag) +{ + return dma_alloc_coherent(dev, size, dma_handle, flag); +} #define dma_free_coherent platform_dma_free_coherent -#define dma_free_noncoherent platform_dma_free_coherent +static inline void +dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr, + dma_addr_t dma_handle) +{ + dma_free_coherent(dev, size, cpu_addr, dma_handle); +} #define dma_map_single platform_dma_map_single #define dma_map_sg platform_dma_map_sg #define dma_unmap_single platform_dma_unmap_single -- cgit v0.10.2 From 8c7e4498adfdb4aea5a0d056590ec18d099ba062 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 14 Feb 2007 00:32:54 -0800 Subject: [PATCH] search a little harder for mkimage Check to see if `${CROSS_COMPILE}mkimage` exists and if not, fall back to the standard `mkimage` The Blackfin toolchain includes mkimage, but we dont want to namespace collide with any of the user's system setup, so we prefix it with our toolchain name. Signed-off-by: Mike Frysinger Cc: Sam Ravnborg Cc: Oleg Verych Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/scripts/mkuboot.sh b/scripts/mkuboot.sh index 52a17ab..4b06c5e 100755 --- a/scripts/mkuboot.sh +++ b/scripts/mkuboot.sh @@ -4,12 +4,15 @@ # Build U-Boot image when `mkimage' tool is available. # -MKIMAGE=$(type -path mkimage) +MKIMAGE=$(type -path ${CROSS_COMPILE}mkimage) if [ -z "${MKIMAGE}" ]; then - # Doesn't exist - echo '"mkimage" command not found - U-Boot images will not be built' >&2 - exit 0; + MKIMAGE=$(type -path mkimage) + if [ -z "${MKIMAGE}" ]; then + # Doesn't exist + echo '"mkimage" command not found - U-Boot images will not be built' >&2 + exit 0; + fi fi # Call "mkimage" to create U-Boot image -- cgit v0.10.2 From 895a39a084e5478121a74752a291165c4502378f Mon Sep 17 00:00:00 2001 From: s situert Date: Wed, 14 Feb 2007 00:32:55 -0800 Subject: [PATCH] Make mkcompile_h use LANG=C and LC_ALL=C for $CC -v Fix a minor bug in mkcompile_h. As one can see, the current locale is used while getting the version of gcc. This produces problems when a locale other than C or en_US is used. As an example, my /proc/version contains Turkish characters in iso-8859-9 encoding. This patch fixes this issue by making sure that the C locale is used to get gcc's version. Cc: Sam Ravnborg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/scripts/mkcompile_h b/scripts/mkcompile_h index d7b8a38..82d0af4 100755 --- a/scripts/mkcompile_h +++ b/scripts/mkcompile_h @@ -58,7 +58,7 @@ UTS_TRUNCATE="sed -e s/\(.\{1,$UTS_LEN\}\).*/\1/" echo \#define LINUX_COMPILE_DOMAIN fi - echo \#define LINUX_COMPILER \"`$CC -v 2>&1 | tail -n 1`\" + echo \#define LINUX_COMPILER \"`LC_ALL=C LANG=C $CC -v 2>&1 | tail -n 1`\" ) > .tmpcompile # Only replace the real compile.h if the new one is different, -- cgit v0.10.2 From e0ab1ec9fcd3799e874ff9086729a480f6c06cd3 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Wed, 14 Feb 2007 00:32:56 -0800 Subject: [PATCH] add .mailmap for proper git-shortlog output This list was built into the git-shortlog tool and has been removed in the latest version. It should be maintained separately so this is what this patch does. A couple more entries were added to the original list as well. Signed-off-by: Nicolas Pitre Acked-by: Junio C Hamano Cc: Linus Torvalds Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/.mailmap b/.mailmap new file mode 100644 index 0000000..bf62dbe --- /dev/null +++ b/.mailmap @@ -0,0 +1,96 @@ +# +# This list is used by git-shortlog to fix a few botched name translations +# in the git archive, either because the author's full name was messed up +# and/or not always written the same way, making contributions from the +# same person appearing not to be so or badly displayed. +# +# repo-abbrev: /pub/scm/linux/kernel/git/ +# + +Aaron Durbin +Adam Oldham +Adam Radford +Adrian Bunk +Alan Cox +Alan Cox +Aleksey Gorelov +Al Viro +Al Viro +Andreas Herrmann +Andrew Morton +Andrew Vasquez +Andy Adamson +Arnaud Patard +Arnd Bergmann +Axel Dyks +Ben Gardner +Ben M Cahill +Björn Steinbrink +Brian Avery +Brian King +Christoph Hellwig +Corey Minyard +David Brownell +David Woodhouse +Domen Puncer +Douglas Gilbert +Ed L. Cashin +Evgeniy Polyakov +Felipe W Damasio +Felix Kuhling +Felix Moeller +Filipe Lautert +Franck Bui-Huu +Frank Zago +Greg Kroah-Hartman +Greg Kroah-Hartman +Greg Kroah-Hartman +Henk Vergonet +Henrik Kretzschmar +Herbert Xu +Jacob Shin +James Bottomley +James Bottomley +James E Wilson +James Ketrenos +Jean Tourrilhes +Jeff Garzik +Jens Axboe +Jens Osterkamp +John Stultz +Juha Yrjola +Juha Yrjola +Juha Yrjola +Kay Sievers +Kenneth W Chen +Koushik +Leonid I Ananiev +Linas Vepstas +Matthieu CASTET +Michel Dänzer +Mitesh shah +Morten Welinder +Morten Welinder +Morten Welinder +Morten Welinder +Nguyen Anh Quynh +Paolo 'Blaisorblade' Giarrusso +Patrick Mochel +Peter A Jonsson +Praveen BP +Rajesh Shah +Ralf Baechle +Ralf Wildenhues +Rémi Denis-Courmont +Rudolf Marek +Rui Saraiva +Sachin P Sant +Sam Ravnborg +Simon Kelley +Stéphane Witzmann +Stephen Hemminger +Tejun Heo +Thomas Graf +Tony Luck +Tsuneo Yoshioka +Valdis Kletnieks -- cgit v0.10.2 From 49e5646d6538f3a1c6697770f0bec2b2a0b7f30e Mon Sep 17 00:00:00 2001 From: Karsten Wiese Date: Wed, 14 Feb 2007 00:32:57 -0800 Subject: [PATCH] qconf: immediately update integer and string values in xconfig display In xconfig's display integer and string values are also shown as part of the config item's descriptive text. This patch updates the descriptive text, when the corresponding value has been changed. Fix for http://bugzilla.kernel.org/show_bug.cgi?id=7744 Take2 uses updateList() so config values dependending on the changed value see the change. Signed-off-by: Karsten Wiese Cc: Roman Zippel Cc: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/scripts/kconfig/qconf.cc b/scripts/kconfig/qconf.cc index c0ae0a7..52a0367 100644 --- a/scripts/kconfig/qconf.cc +++ b/scripts/kconfig/qconf.cc @@ -89,6 +89,7 @@ void ConfigItem::okRename(int col) { Parent::okRename(col); sym_set_string_value(menu->sym, text(dataColIdx).latin1()); + listView()->updateList(this); } #endif -- cgit v0.10.2 From 66e7c7230fed159e138fc1292ee662b8bbdb74d6 Mon Sep 17 00:00:00 2001 From: Shlomi Fish Date: Wed, 14 Feb 2007 00:32:58 -0800 Subject: [PATCH] qconf: relocate Search Command Relocate the qconf search command to the "Edit"->"Find" menu option. This is per the discussion on my qconf search dialog patch. Cc: Sam Ravnborg Cc: Roman Zippel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/scripts/kconfig/qconf.cc b/scripts/kconfig/qconf.cc index 52a0367..83a2703 100644 --- a/scripts/kconfig/qconf.cc +++ b/scripts/kconfig/qconf.cc @@ -1317,7 +1317,7 @@ ConfigMainWindow::ConfigMainWindow(void) conf_changed(); QAction *saveAsAction = new QAction("Save As...", "Save &As...", 0, this); connect(saveAsAction, SIGNAL(activated()), SLOT(saveConfigAs())); - QAction *searchAction = new QAction("Search", "&Search", CTRL+Key_F, this); + QAction *searchAction = new QAction("Find", "&Find", CTRL+Key_F, this); connect(searchAction, SIGNAL(activated()), SLOT(searchConfig())); QAction *singleViewAction = new QAction("Single View", QPixmap(xpm_single_view), "Split View", 0, this); connect(singleViewAction, SIGNAL(activated()), SLOT(showSingleView())); @@ -1374,10 +1374,13 @@ ConfigMainWindow::ConfigMainWindow(void) saveAction->addTo(config); saveAsAction->addTo(config); config->insertSeparator(); - searchAction->addTo(config); - config->insertSeparator(); quitAction->addTo(config); + // create edit menu + QPopupMenu* editMenu = new QPopupMenu(this); + menu->insertItem("&Edit", editMenu); + searchAction->addTo(editMenu); + // create options menu QPopupMenu* optionMenu = new QPopupMenu(this); menu->insertItem("&Option", optionMenu); -- cgit v0.10.2 From 786fb18d015cc5f34284d426e055ddd7a3dbb53b Mon Sep 17 00:00:00 2001 From: "Cyrill V. Gorcunov" Date: Wed, 14 Feb 2007 00:32:59 -0800 Subject: [PATCH] qconf: fix showing help info on failed search qconf does not clear help text in search window if previous search has been failed. Signed-off-by: Cyrill V. Gorcunov Cc: Roman Zippel Cc: Sam Ravnborg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/scripts/kconfig/qconf.cc b/scripts/kconfig/qconf.cc index 83a2703..9912445 100644 --- a/scripts/kconfig/qconf.cc +++ b/scripts/kconfig/qconf.cc @@ -1248,6 +1248,7 @@ void ConfigSearchWindow::search(void) free(result); list->list->clear(); + info->clear(); result = sym_re_search(editField->text().latin1()); if (!result) -- cgit v0.10.2 From f253f00003c3fed0355cf49482f24c56bc5dbea6 Mon Sep 17 00:00:00 2001 From: "Cyrill V. Gorcunov" Date: Wed, 14 Feb 2007 00:33:00 -0800 Subject: [PATCH] qconf: Back button behaviour normalization Do "Back" button behaviour normalization so it is enabled starting from second-level menu only. Signed-off-by: Cyrill V. Gorcunov Cc: Roman Zippel Cc: Sam Ravnborg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/scripts/kconfig/qconf.cc b/scripts/kconfig/qconf.cc index 9912445..0981d2a 100644 --- a/scripts/kconfig/qconf.cc +++ b/scripts/kconfig/qconf.cc @@ -1472,7 +1472,10 @@ void ConfigMainWindow::searchConfig(void) void ConfigMainWindow::changeMenu(struct menu *menu) { configList->setRootMenu(menu); - backAction->setEnabled(TRUE); + if (configList->rootEntry->parent == &rootmenu) + backAction->setEnabled(FALSE); + else + backAction->setEnabled(TRUE); } void ConfigMainWindow::setMenuLink(struct menu *menu) -- cgit v0.10.2 From d395efb544aba803ffe42b16a1862be655aca369 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Wed, 14 Feb 2007 00:33:01 -0800 Subject: [PATCH] Kbuild: Remove references to deprecated "prepare-all" target from Makefile Remove references to the deprecated "make prepare-all" target from the top-level Makefile; use just "make prepare" instead. Signed-off-by: Robert P. J. Day Cc: Sam Ravnborg Acked-by: Oleg Verych Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Makefile b/Makefile index 7e4968f..678119c 100644 --- a/Makefile +++ b/Makefile @@ -825,9 +825,6 @@ include/config/kernel.release: include/config/auto.conf FORCE # Listed in dependency order PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3 -# prepare-all is deprecated, use prepare as valid replacement -PHONY += prepare-all - # prepare3 is used to check if we are building in a separate output directory, # and if so do: # 1) Check that make has not been executed in the kernel src $(srctree) @@ -860,7 +857,7 @@ prepare0: archprepare FORCE $(Q)$(MAKE) $(build)=. # All the preparing.. -prepare prepare-all: prepare0 +prepare: prepare0 # Leave this as default for preprocessing vmlinux.lds.S, which is now # done in arch/$(ARCH)/kernel/Makefile -- cgit v0.10.2 From 1f85712e6e1f2450ec4fd2ab18f8887bf7280f8e Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 14 Feb 2007 00:33:02 -0800 Subject: [PATCH] new toplevel target: headers_check_all Add new headers_check_all target for checking all arches in one go. Useful for distros (and people with too much time on their hands) that support a ton of architectures, headers_check_all is to headers_check as headers_install_all is to headers_install Signed-off-by: Mike Frysinger Cc: David Woodhouse Cc: Sam Ravnborg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Makefile b/Makefile index 678119c..b6c8790 100644 --- a/Makefile +++ b/Makefile @@ -928,6 +928,12 @@ headers_install: include/linux/version.h scripts_basic FORCE $(Q)$(MAKE) $(build)=scripts scripts/unifdef $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.headersinst obj=include +PHONY += headers_check_all +headers_check_all: headers_install_all + $(Q)for arch in $(HDRARCHES); do \ + $(MAKE) ARCH=$$arch -f $(srctree)/scripts/Makefile.headersinst obj=include BIASMDIR=-bi-$$arch HDRCHECK=1 ;\ + done + PHONY += headers_check headers_check: headers_install $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.headersinst obj=include HDRCHECK=1 -- cgit v0.10.2 From ed8b4d4d7a31923db32f4684535944d69eb43677 Mon Sep 17 00:00:00 2001 From: "Cyrill V. Gorcunov" Date: Wed, 14 Feb 2007 00:33:03 -0800 Subject: [PATCH] qconf: hide empty list items This patch fixes showing empty config list items if "Option/Show All Options" is turned on. For example empty items appears on list of 'Block Layer' menu. Signed-off-by: Cyrill V. Gorcunov Cc: Roman Zippel Cc: Sam Ravnborg Cc: Oleg Verych Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/scripts/kconfig/qconf.cc b/scripts/kconfig/qconf.cc index 0981d2a..512c2f5 100644 --- a/scripts/kconfig/qconf.cc +++ b/scripts/kconfig/qconf.cc @@ -606,6 +606,8 @@ void ConfigList::updateMenuList(P* parent, struct menu* menu) visible = menu_is_visible(child); if (showAll || visible) { + if (!child->sym && !child->list && !child->prompt) + continue; if (!item || item->menu != child) item = new ConfigItem(parent, last, child, visible); else -- cgit v0.10.2 From 40b36daad0ac704e6d5c1b75789f371ef5b053c1 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Wed, 14 Feb 2007 00:33:04 -0800 Subject: [PATCH] 8250 UART backup timer The patch below works around a minor bug found in the UART of the remote management card used in many HP ia64 and parisc servers (aka the Diva UARTs). The problem is that the UART does not reassert the THRE interrupt if it has been previously cleared and the IIR THRI bit is re-enabled. This can produce a very annoying failure mode when used as a serial console, allowing a boot/reboot to hang indefinitely until an RX interrupt kicks it into working again (ie. an unattended reboot could stall). To solve this problem, a backup timer is introduced that runs alongside the standard interrupt driven mechanism. This timer wakes up periodically, checks for a hang condition and gets characters moving again. This backup mechanism is only enabled if the UART is detected as having this problem, so systems without these UARTs will have no additional overhead. This version of the patch incorporates previous comments from Pavel and removes races in the bug detection code. The test is now done before the irq linking to prevent races with interrupt handler clearing the THRE interrupt. Short delays and syncs are also added to ensure the device is able to update register state before the result is tested. Aristeu says: this was tested on the following HP machines and solved the problem: rx2600, rx2620, rx1600 and rx1620s. hpa says: I have seen this same bug in soft UART IP from "a major vendor." Signed-off-by: Alex Williamson Cc: "H. Peter Anvin" Cc: Russell King Acked-by: Aristeu Sergio Rozanski Filho Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 2964ca9..98ec861 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -364,6 +364,23 @@ serial_out(struct uart_8250_port *up, int offset, int value) } } +static void +serial_out_sync(struct uart_8250_port *up, int offset, int value) +{ + switch (up->port.iotype) { + case UPIO_MEM: + case UPIO_MEM32: +#ifdef CONFIG_SERIAL_8250_AU1X00 + case UPIO_AU: +#endif + serial_out(up, offset, value); + serial_in(up, UART_LCR); /* safe, no side-effects */ + break; + default: + serial_out(up, offset, value); + } +} + /* * We used to support using pause I/O for certain machines. We * haven't supported this for a while, but just in case it's badly @@ -1045,7 +1062,7 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) #endif serial_outp(up, UART_MCR, save_mcr); serial8250_clear_fifos(up); - (void)serial_in(up, UART_RX); + serial_in(up, UART_RX); if (up->capabilities & UART_CAP_UUE) serial_outp(up, UART_IER, UART_IER_UUE); else @@ -1451,6 +1468,12 @@ static void serial_unlink_irq_chain(struct uart_8250_port *up) serial_do_unlink(i, up); } +/* Base timer interval for polling */ +static inline int poll_timeout(int timeout) +{ + return timeout > 6 ? (timeout / 2 - 2) : 1; +} + /* * This function is used to handle ports that do not have an * interrupt. This doesn't work very well for 16450's, but gives @@ -1460,16 +1483,51 @@ static void serial_unlink_irq_chain(struct uart_8250_port *up) static void serial8250_timeout(unsigned long data) { struct uart_8250_port *up = (struct uart_8250_port *)data; - unsigned int timeout; unsigned int iir; iir = serial_in(up, UART_IIR); if (!(iir & UART_IIR_NO_INT)) serial8250_handle_port(up); + mod_timer(&up->timer, jiffies + poll_timeout(up->port.timeout)); +} + +static void serial8250_backup_timeout(unsigned long data) +{ + struct uart_8250_port *up = (struct uart_8250_port *)data; + unsigned int iir, ier = 0; + + /* + * Must disable interrupts or else we risk racing with the interrupt + * based handler. + */ + if (is_real_interrupt(up->port.irq)) { + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, 0); + } - timeout = up->port.timeout; - timeout = timeout > 6 ? (timeout / 2 - 2) : 1; - mod_timer(&up->timer, jiffies + timeout); + iir = serial_in(up, UART_IIR); + + /* + * This should be a safe test for anyone who doesn't trust the + * IIR bits on their UART, but it's specifically designed for + * the "Diva" UART used on the management processor on many HP + * ia64 and parisc boxes. + */ + if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) && + (!uart_circ_empty(&up->port.info->xmit) || up->port.x_char) && + (serial_in(up, UART_LSR) & UART_LSR_THRE)) { + iir &= ~(UART_IIR_ID | UART_IIR_NO_INT); + iir |= UART_IIR_THRI; + } + + if (!(iir & UART_IIR_NO_INT)) + serial8250_handle_port(up); + + if (is_real_interrupt(up->port.irq)) + serial_out(up, UART_IER, ier); + + /* Standard timer interval plus 0.2s to keep the port running */ + mod_timer(&up->timer, jiffies + poll_timeout(up->port.timeout) + HZ/5); } static unsigned int serial8250_tx_empty(struct uart_port *port) @@ -1540,6 +1598,37 @@ static void serial8250_break_ctl(struct uart_port *port, int break_state) spin_unlock_irqrestore(&up->port.lock, flags); } +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +/* + * Wait for transmitter & holding register to empty + */ +static inline void wait_for_xmitr(struct uart_8250_port *up, int bits) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + do { + status = serial_in(up, UART_LSR); + + if (status & UART_LSR_BI) + up->lsr_break_flag = UART_LSR_BI; + + if (--tmout == 0) + break; + udelay(1); + } while ((status & bits) != bits); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (!(serial_in(up, UART_MSR) & UART_MSR_CTS) && --tmout) { + udelay(1); + touch_nmi_watchdog(); + } + } +} + static int serial8250_startup(struct uart_port *port) { struct uart_8250_port *up = (struct uart_8250_port *)port; @@ -1613,18 +1702,50 @@ static int serial8250_startup(struct uart_port *port) serial_outp(up, UART_LCR, 0); } + if (is_real_interrupt(up->port.irq)) { + /* + * Test for UARTs that do not reassert THRE when the + * transmitter is idle and the interrupt has already + * been cleared. Real 16550s should always reassert + * this interrupt whenever the transmitter is idle and + * the interrupt is enabled. Delays are necessary to + * allow register changes to become visible. + */ + spin_lock_irqsave(&up->port.lock, flags); + + wait_for_xmitr(up, UART_LSR_THRE); + serial_out_sync(up, UART_IER, UART_IER_THRI); + udelay(1); /* allow THRE to set */ + serial_in(up, UART_IIR); + serial_out(up, UART_IER, 0); + serial_out_sync(up, UART_IER, UART_IER_THRI); + udelay(1); /* allow a working UART time to re-assert THRE */ + iir = serial_in(up, UART_IIR); + serial_out(up, UART_IER, 0); + + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * If the interrupt is not reasserted, setup a timer to + * kick the UART on a regular basis. + */ + if (iir & UART_IIR_NO_INT) { + pr_debug("ttyS%d - using backup timer\n", port->line); + up->timer.function = serial8250_backup_timeout; + up->timer.data = (unsigned long)up; + mod_timer(&up->timer, jiffies + + poll_timeout(up->port.timeout) + HZ/5); + } + } + /* * If the "interrupt" for this port doesn't correspond with any * hardware interrupt, we use a timer-based system. The original * driver used to do this with IRQ0. */ if (!is_real_interrupt(up->port.irq)) { - unsigned int timeout = up->port.timeout; - - timeout = timeout > 6 ? (timeout / 2 - 2) : 1; - up->timer.data = (unsigned long)up; - mod_timer(&up->timer, jiffies + timeout); + mod_timer(&up->timer, jiffies + poll_timeout(up->port.timeout)); } else { retval = serial_link_irq_chain(up); if (retval) @@ -1740,9 +1861,9 @@ static void serial8250_shutdown(struct uart_port *port) */ (void) serial_in(up, UART_RX); - if (!is_real_interrupt(up->port.irq)) - del_timer_sync(&up->timer); - else + del_timer_sync(&up->timer); + up->timer.function = serial8250_timeout; + if (is_real_interrupt(up->port.irq)) serial_unlink_irq_chain(up); } @@ -2212,37 +2333,6 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev) #ifdef CONFIG_SERIAL_8250_CONSOLE -#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) - -/* - * Wait for transmitter & holding register to empty - */ -static inline void wait_for_xmitr(struct uart_8250_port *up, int bits) -{ - unsigned int status, tmout = 10000; - - /* Wait up to 10ms for the character(s) to be sent. */ - do { - status = serial_in(up, UART_LSR); - - if (status & UART_LSR_BI) - up->lsr_break_flag = UART_LSR_BI; - - if (--tmout == 0) - break; - udelay(1); - } while ((status & bits) != bits); - - /* Wait up to 1s for flow control if necessary */ - if (up->port.flags & UPF_CONS_FLOW) { - tmout = 1000000; - while (!(serial_in(up, UART_MSR) & UART_MSR_CTS) && --tmout) { - udelay(1); - touch_nmi_watchdog(); - } - } -} - static void serial8250_console_putchar(struct uart_port *port, int ch) { struct uart_8250_port *up = (struct uart_8250_port *)port; -- cgit v0.10.2 From 9b22271d4b8c1be8a81563c322d3f04e7cbe2153 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 14 Feb 2007 00:33:05 -0800 Subject: [PATCH] serial: trivial code flow simplification Return failure immediately, so we don't have to test it twice. Signed-off-by: Bjorn Helgaas Cc: Adam Belay Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c index d3d6b82..cde5db4 100644 --- a/drivers/serial/8250_pnp.c +++ b/drivers/serial/8250_pnp.c @@ -450,11 +450,11 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) port.dev = &dev->dev; line = serial8250_register_port(&port); + if (line < 0) + return -ENODEV; - if (line >= 0) - pnp_set_drvdata(dev, (void *)((long)line + 1)); - return line >= 0 ? 0 : -ENODEV; - + pnp_set_drvdata(dev, (void *)((long)line + 1)); + return 0; } static void __devexit serial_pnp_remove(struct pnp_dev *dev) -- cgit v0.10.2 From 3689a0ec60bc8f56cc372c1dfa0d89dab48f7c9c Mon Sep 17 00:00:00 2001 From: "George G. Davis" Date: Wed, 14 Feb 2007 00:33:06 -0800 Subject: [PATCH] serial: make sure UART is powered up when dumping MCTRL status Since serial devices are powered down when not in use and some of those devices cannot be accessed when powered down, we need to enable power around calls to get_mcrtl() when dumping port state via uart_line_info(). This resolves hangs observed on some machines while reading serial device registers when a port is powered off. Signed-off-by: George G. Davis Cc: Russell King Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index f84982e..66fdd3b 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1660,6 +1660,7 @@ static const char *uart_type(struct uart_port *port) static int uart_line_info(char *buf, struct uart_driver *drv, int i) { struct uart_state *state = drv->state + i; + int pm_state; struct uart_port *port = state->port; char stat_buf[32]; unsigned int status; @@ -1682,9 +1683,16 @@ static int uart_line_info(char *buf, struct uart_driver *drv, int i) if(capable(CAP_SYS_ADMIN)) { + mutex_lock(&state->mutex); + pm_state = state->pm_state; + if (pm_state) + uart_change_pm(state, 0); spin_lock_irq(&port->lock); status = port->ops->get_mctrl(port); spin_unlock_irq(&port->lock); + if (pm_state) + uart_change_pm(state, pm_state); + mutex_unlock(&state->mutex); ret += sprintf(buf + ret, " tx:%d rx:%d", port->icount.tx, port->icount.rx); @@ -2100,6 +2108,9 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state, uart_report_port(drv, port); + /* Power up port for set_mctrl() */ + uart_change_pm(state, 0); + /* * Ensure that the modem control lines are de-activated. * We probably don't need a spinlock around this, but -- cgit v0.10.2 From 8f31bb39ec2a5622974666c72257e74c22492602 Mon Sep 17 00:00:00 2001 From: Burman Yan Date: Wed, 14 Feb 2007 00:33:07 -0800 Subject: [PATCH] serial: replace kmalloc+memset with kzalloc Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/serial/8250_acorn.c b/drivers/serial/8250_acorn.c index ef8cc8a..562ba74 100644 --- a/drivers/serial/8250_acorn.c +++ b/drivers/serial/8250_acorn.c @@ -47,11 +47,10 @@ serial_card_probe(struct expansion_card *ec, const struct ecard_id *id) unsigned long bus_addr; unsigned int i; - info = kmalloc(sizeof(struct serial_card_info), GFP_KERNEL); + info = kzalloc(sizeof(struct serial_card_info), GFP_KERNEL); if (!info) return -ENOMEM; - memset(info, 0, sizeof(struct serial_card_info)); info->num_ports = type->num_ports; bus_addr = ecard_resource_start(ec, type->type); diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index a2dac37..2989228 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -1628,7 +1628,7 @@ pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board) nr_ports = rc; } - priv = kmalloc(sizeof(struct serial_private) + + priv = kzalloc(sizeof(struct serial_private) + sizeof(unsigned int) * nr_ports, GFP_KERNEL); if (!priv) { @@ -1636,9 +1636,6 @@ pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board) goto err_deinit; } - memset(priv, 0, sizeof(struct serial_private) + - sizeof(unsigned int) * nr_ports); - priv->dev = dev; priv->quirk = quirk; diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c index 71e6a24..1c4c381 100644 --- a/drivers/serial/icom.c +++ b/drivers/serial/icom.c @@ -1417,14 +1417,12 @@ static int __devinit icom_alloc_adapter(struct icom_adapter struct list_head *tmp; icom_adapter = (struct icom_adapter *) - kmalloc(sizeof(struct icom_adapter), GFP_KERNEL); + kzalloc(sizeof(struct icom_adapter), GFP_KERNEL); if (!icom_adapter) { return -ENOMEM; } - memset(icom_adapter, 0, sizeof(struct icom_adapter)); - list_for_each(tmp, &icom_adapter_head) { cur_adapter_entry = list_entry(tmp, struct icom_adapter, diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c index 9cc0be9..168073f 100644 --- a/drivers/serial/ioc3_serial.c +++ b/drivers/serial/ioc3_serial.c @@ -2019,13 +2019,12 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd) DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __FUNCTION__, is, idd)); - card_ptr = kmalloc(sizeof(struct ioc3_card), GFP_KERNEL); + card_ptr = kzalloc(sizeof(struct ioc3_card), GFP_KERNEL); if (!card_ptr) { printk(KERN_WARNING "ioc3_attach_one" ": unable to get memory for the IOC3\n"); return -ENOMEM; } - memset(card_ptr, 0, sizeof(struct ioc3_card)); idd->data[is->id] = card_ptr; Submodule_slot = is->id; @@ -2040,13 +2039,12 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd) /* Create port structures for each port */ for (phys_port = 0; phys_port < PORTS_PER_CARD; phys_port++) { - port = kmalloc(sizeof(struct ioc3_port), GFP_KERNEL); + port = kzalloc(sizeof(struct ioc3_port), GFP_KERNEL); if (!port) { printk(KERN_WARNING "IOC3 serial memory not available for port\n"); goto out4; } - memset(port, 0, sizeof(struct ioc3_port)); spin_lock_init(&port->ip_lock); /* we need to remember the previous ones, to point back to diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c index f540212..0c17938 100644 --- a/drivers/serial/ioc4_serial.c +++ b/drivers/serial/ioc4_serial.c @@ -1076,13 +1076,12 @@ static int inline ioc4_attach_local(struct ioc4_driver_data *idd) /* Create port structures for each port */ for (port_number = 0; port_number < IOC4_NUM_SERIAL_PORTS; port_number++) { - port = kmalloc(sizeof(struct ioc4_port), GFP_KERNEL); + port = kzalloc(sizeof(struct ioc4_port), GFP_KERNEL); if (!port) { printk(KERN_WARNING "IOC4 serial memory not available for port\n"); return -ENOMEM; } - memset(port, 0, sizeof(struct ioc4_port)); spin_lock_init(&port->ip_lock); /* we need to remember the previous ones, to point back to @@ -2811,7 +2810,7 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd) (void *)serial)); /* Get memory for the new card */ - control = kmalloc(sizeof(struct ioc4_control), GFP_KERNEL); + control = kzalloc(sizeof(struct ioc4_control), GFP_KERNEL); if (!control) { printk(KERN_WARNING "ioc4_attach_one" @@ -2819,11 +2818,10 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd) ret = -ENOMEM; goto out2; } - memset(control, 0, sizeof(struct ioc4_control)); idd->idd_serial_data = control; /* Allocate the soft structure */ - soft = kmalloc(sizeof(struct ioc4_soft), GFP_KERNEL); + soft = kzalloc(sizeof(struct ioc4_soft), GFP_KERNEL); if (!soft) { printk(KERN_WARNING "ioc4 (%p): unable to get memory for the soft struct\n", @@ -2831,7 +2829,6 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd) ret = -ENOMEM; goto out3; } - memset(soft, 0, sizeof(struct ioc4_soft)); spin_lock_init(&soft->is_ir_lock); soft->is_ioc4_misc_addr = idd->idd_misc_regs; diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c index 0746c94..c475f22 100644 --- a/drivers/serial/ip22zilog.c +++ b/drivers/serial/ip22zilog.c @@ -922,13 +922,7 @@ static int zilog_irq = -1; static void * __init alloc_one_table(unsigned long size) { - void *ret; - - ret = kmalloc(size, GFP_KERNEL); - if (ret != NULL) - memset(ret, 0, size); - - return ret; + return kzalloc(size, GFP_KERNEL); } static void __init ip22zilog_alloc_tables(void) diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c index 244f63b..81792e6 100644 --- a/drivers/serial/jsm/jsm_driver.c +++ b/drivers/serial/jsm/jsm_driver.c @@ -71,14 +71,13 @@ static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent) goto out_disable_device; } - brd = kmalloc(sizeof(struct jsm_board), GFP_KERNEL); + brd = kzalloc(sizeof(struct jsm_board), GFP_KERNEL); if (!brd) { dev_err(&pdev->dev, "memory allocation for board structure failed\n"); rc = -ENOMEM; goto out_release_regions; } - memset(brd, 0, sizeof(struct jsm_board)); /* store the info for the board we've found */ brd->boardnum = adapter_count++; @@ -152,7 +151,7 @@ static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent) * Okay to malloc with GFP_KERNEL, we are not at interrupt * context, and there are no locks held. */ - brd->flipbuf = kmalloc(MYFLIPLEN, GFP_KERNEL); + brd->flipbuf = kzalloc(MYFLIPLEN, GFP_KERNEL); if (!brd->flipbuf) { /* XXX: leaking all resources from jsm_tty_init and jsm_uart_port_init here! */ @@ -160,7 +159,6 @@ static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent) retval = -ENOMEM; goto out_free_irq; } - memset(brd->flipbuf, 0, MYFLIPLEN); pci_set_drvdata(pdev, brd); diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c index 7cf1c60..be22bbd 100644 --- a/drivers/serial/jsm/jsm_tty.c +++ b/drivers/serial/jsm/jsm_tty.c @@ -194,31 +194,28 @@ static int jsm_tty_open(struct uart_port *port) /* Drop locks, as malloc with GFP_KERNEL can sleep */ if (!channel->ch_rqueue) { - channel->ch_rqueue = (u8 *) kmalloc(RQUEUESIZE, GFP_KERNEL); + channel->ch_rqueue = kzalloc(RQUEUESIZE, GFP_KERNEL); if (!channel->ch_rqueue) { jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev, "unable to allocate read queue buf"); return -ENOMEM; } - memset(channel->ch_rqueue, 0, RQUEUESIZE); } if (!channel->ch_equeue) { - channel->ch_equeue = (u8 *) kmalloc(EQUEUESIZE, GFP_KERNEL); + channel->ch_equeue = kzalloc(EQUEUESIZE, GFP_KERNEL); if (!channel->ch_equeue) { jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev, "unable to allocate error queue buf"); return -ENOMEM; } - memset(channel->ch_equeue, 0, EQUEUESIZE); } if (!channel->ch_wqueue) { - channel->ch_wqueue = (u8 *) kmalloc(WQUEUESIZE, GFP_KERNEL); + channel->ch_wqueue = kzalloc(WQUEUESIZE, GFP_KERNEL); if (!channel->ch_wqueue) { jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev, "unable to allocate write queue buf"); return -ENOMEM; } - memset(channel->ch_wqueue, 0, WQUEUESIZE); } channel->ch_flags &= ~(CH_OPENING); @@ -392,13 +389,12 @@ int jsm_tty_init(struct jsm_board *brd) * Okay to malloc with GFP_KERNEL, we are not at * interrupt context, and there are no locks held. */ - brd->channels[i] = kmalloc(sizeof(struct jsm_channel), GFP_KERNEL); + brd->channels[i] = kzalloc(sizeof(struct jsm_channel), GFP_KERNEL); if (!brd->channels[i]) { jsm_printk(CORE, ERR, &brd->pci_dev, "%s:%d Unable to allocate memory for channel struct\n", __FILE__, __LINE__); } - memset(brd->channels[i], 0, sizeof(struct jsm_channel)); } } diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 66fdd3b..0422c0f 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1523,9 +1523,8 @@ static struct uart_state *uart_get(struct uart_driver *drv, int line) } if (!state->info) { - state->info = kmalloc(sizeof(struct uart_info), GFP_KERNEL); + state->info = kzalloc(sizeof(struct uart_info), GFP_KERNEL); if (state->info) { - memset(state->info, 0, sizeof(struct uart_info)); init_waitqueue_head(&state->info->open_wait); init_waitqueue_head(&state->info->delta_msr_wait); @@ -2178,13 +2177,11 @@ int uart_register_driver(struct uart_driver *drv) * Maybe we should be using a slab cache for this, especially if * we have a large number of ports to handle. */ - drv->state = kmalloc(sizeof(struct uart_state) * drv->nr, GFP_KERNEL); + drv->state = kzalloc(sizeof(struct uart_state) * drv->nr, GFP_KERNEL); retval = -ENOMEM; if (!drv->state) goto out; - memset(drv->state, 0, sizeof(struct uart_state) * drv->nr); - normal = alloc_tty_driver(drv->nr); if (!normal) goto out; diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index 431433f..10baa2c 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -334,10 +334,9 @@ static int serial_probe(struct pcmcia_device *link) DEBUG(0, "serial_attach()\n"); /* Create new serial device */ - info = kmalloc(sizeof (*info), GFP_KERNEL); + info = kzalloc(sizeof (*info), GFP_KERNEL); if (!info) return -ENOMEM; - memset(info, 0, sizeof (*info)); info->p_dev = link; link->priv = info; -- cgit v0.10.2 From e6fa0ba304f0642b5e9454c20b07740b8bf2c416 Mon Sep 17 00:00:00 2001 From: Vitaly Wool Date: Wed, 14 Feb 2007 00:33:08 -0800 Subject: [PATCH] fix PNX8550 serial breakage Fix the serial header breakage for the PNX8550 MIPS platform. Signed-off-by: Vitaly Wool Cc: Ralf Baechle Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index cf23813..586aaba 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -122,7 +122,7 @@ /*Digi jsm */ #define PORT_JSM 69 -#define PORT_IP3106 70 +#define PORT_PNX8XXX 70 /* Hilscher netx */ #define PORT_NETX 71 diff --git a/include/linux/serial_ip3106.h b/include/linux/serial_ip3106.h deleted file mode 100644 index f500ac6..0000000 --- a/include/linux/serial_ip3106.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Embedded Alley Solutions, source@embeddedalley.com. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _LINUX_SERIAL_IP3106_H -#define _LINUX_SERIAL_IP3106_H - -#include -#include - -#define IP3106_NR_PORTS 2 - -struct ip3106_port { - struct uart_port port; - struct timer_list timer; - unsigned int old_status; -}; - -/* register offsets */ -#define IP3106_LCR 0 -#define IP3106_MCR 0x004 -#define IP3106_BAUD 0x008 -#define IP3106_CFG 0x00c -#define IP3106_FIFO 0x028 -#define IP3106_ISTAT 0xfe0 -#define IP3106_IEN 0xfe4 -#define IP3106_ICLR 0xfe8 -#define IP3106_ISET 0xfec -#define IP3106_PD 0xff4 -#define IP3106_MID 0xffc - -#define IP3106_UART_LCR_TXBREAK (1<<30) -#define IP3106_UART_LCR_PAREVN 0x10000000 -#define IP3106_UART_LCR_PAREN 0x08000000 -#define IP3106_UART_LCR_2STOPB 0x04000000 -#define IP3106_UART_LCR_8BIT 0x01000000 -#define IP3106_UART_LCR_TX_RST 0x00040000 -#define IP3106_UART_LCR_RX_RST 0x00020000 -#define IP3106_UART_LCR_RX_NEXT 0x00010000 - -#define IP3106_UART_MCR_SCR 0xFF000000 -#define IP3106_UART_MCR_DCD 0x00800000 -#define IP3106_UART_MCR_CTS 0x00100000 -#define IP3106_UART_MCR_LOOP 0x00000010 -#define IP3106_UART_MCR_RTS 0x00000002 -#define IP3106_UART_MCR_DTR 0x00000001 - -#define IP3106_UART_INT_TX 0x00000080 -#define IP3106_UART_INT_EMPTY 0x00000040 -#define IP3106_UART_INT_RCVTO 0x00000020 -#define IP3106_UART_INT_RX 0x00000010 -#define IP3106_UART_INT_RXOVRN 0x00000008 -#define IP3106_UART_INT_FRERR 0x00000004 -#define IP3106_UART_INT_BREAK 0x00000002 -#define IP3106_UART_INT_PARITY 0x00000001 -#define IP3106_UART_INT_ALLRX 0x0000003F -#define IP3106_UART_INT_ALLTX 0x000000C0 - -#define IP3106_UART_FIFO_TXFIFO 0x001F0000 -#define IP3106_UART_FIFO_TXFIFO_STA (0x1f<<16) -#define IP3106_UART_FIFO_RXBRK 0x00008000 -#define IP3106_UART_FIFO_RXFE 0x00004000 -#define IP3106_UART_FIFO_RXPAR 0x00002000 -#define IP3106_UART_FIFO_RXFIFO 0x00001F00 -#define IP3106_UART_FIFO_RBRTHR 0x000000FF - -#endif diff --git a/include/linux/serial_pnx8xxx.h b/include/linux/serial_pnx8xxx.h new file mode 100644 index 0000000..de6c19c --- /dev/null +++ b/include/linux/serial_pnx8xxx.h @@ -0,0 +1,81 @@ +/* + * Embedded Alley Solutions, source@embeddedalley.com. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _LINUX_SERIAL_PNX8XXX_H +#define _LINUX_SERIAL_PNX8XXX_H + +#include +#include + +#define PNX8XXX_NR_PORTS 2 + +struct pnx8xxx_port { + struct uart_port port; + struct timer_list timer; + unsigned int old_status; +}; + +/* register offsets */ +#define PNX8XXX_LCR 0 +#define PNX8XXX_MCR 0x004 +#define PNX8XXX_BAUD 0x008 +#define PNX8XXX_CFG 0x00c +#define PNX8XXX_FIFO 0x028 +#define PNX8XXX_ISTAT 0xfe0 +#define PNX8XXX_IEN 0xfe4 +#define PNX8XXX_ICLR 0xfe8 +#define PNX8XXX_ISET 0xfec +#define PNX8XXX_PD 0xff4 +#define PNX8XXX_MID 0xffc + +#define PNX8XXX_UART_LCR_TXBREAK (1<<30) +#define PNX8XXX_UART_LCR_PAREVN 0x10000000 +#define PNX8XXX_UART_LCR_PAREN 0x08000000 +#define PNX8XXX_UART_LCR_2STOPB 0x04000000 +#define PNX8XXX_UART_LCR_8BIT 0x01000000 +#define PNX8XXX_UART_LCR_TX_RST 0x00040000 +#define PNX8XXX_UART_LCR_RX_RST 0x00020000 +#define PNX8XXX_UART_LCR_RX_NEXT 0x00010000 + +#define PNX8XXX_UART_MCR_SCR 0xFF000000 +#define PNX8XXX_UART_MCR_DCD 0x00800000 +#define PNX8XXX_UART_MCR_CTS 0x00100000 +#define PNX8XXX_UART_MCR_LOOP 0x00000010 +#define PNX8XXX_UART_MCR_RTS 0x00000002 +#define PNX8XXX_UART_MCR_DTR 0x00000001 + +#define PNX8XXX_UART_INT_TX 0x00000080 +#define PNX8XXX_UART_INT_EMPTY 0x00000040 +#define PNX8XXX_UART_INT_RCVTO 0x00000020 +#define PNX8XXX_UART_INT_RX 0x00000010 +#define PNX8XXX_UART_INT_RXOVRN 0x00000008 +#define PNX8XXX_UART_INT_FRERR 0x00000004 +#define PNX8XXX_UART_INT_BREAK 0x00000002 +#define PNX8XXX_UART_INT_PARITY 0x00000001 +#define PNX8XXX_UART_INT_ALLRX 0x0000003F +#define PNX8XXX_UART_INT_ALLTX 0x000000C0 + +#define PNX8XXX_UART_FIFO_TXFIFO 0x001F0000 +#define PNX8XXX_UART_FIFO_TXFIFO_STA (0x1f<<16) +#define PNX8XXX_UART_FIFO_RXBRK 0x00008000 +#define PNX8XXX_UART_FIFO_RXFE 0x00004000 +#define PNX8XXX_UART_FIFO_RXPAR 0x00002000 +#define PNX8XXX_UART_FIFO_RXFIFO 0x00001F00 +#define PNX8XXX_UART_FIFO_RBRTHR 0x000000FF + +#endif -- cgit v0.10.2 From de8211b96b8491911bcb222d153c0986cb522bd6 Mon Sep 17 00:00:00 2001 From: Vitaly Wool Date: Wed, 14 Feb 2007 00:33:09 -0800 Subject: [PATCH] PNX8550 UART driver Add UART support for PNX8330/8550/8950 Philips MIPS-based SoCs. Signed-off-by: Vitaly Wool Cc: Russell King Cc: Alan Cox Cc: Ralf Baechle Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index d0edbaa..e8dd71d 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -686,6 +686,22 @@ config SERIAL_SH_SCI_CONSOLE depends on SERIAL_SH_SCI=y select SERIAL_CORE_CONSOLE +config SERIAL_PNX8XXX + bool "Enable PNX8XXX SoCs' UART Support" + depends on MIPS && SOC_PNX8550 + select SERIAL_CORE + help + If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330 + and you want to use serial ports, say Y. Otherwise, say N. + +config SERIAL_PNX8XXX_CONSOLE + bool "Enable PNX8XX0 serial console" + depends on SERIAL_PNX8XXX + select SERIAL_CORE_CONSOLE + help + If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330 + and you want to use serial console, say Y. Otherwise, say N. + config SERIAL_CORE tristate diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index f3f8258..6b3560c 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o obj-$(CONFIG_SERIAL_PXA) += pxa.o +obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o obj-$(CONFIG_SERIAL_SA1100) += sa1100.o obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o diff --git a/drivers/serial/pnx8xxx_uart.c b/drivers/serial/pnx8xxx_uart.c new file mode 100644 index 0000000..8d01c59 --- /dev/null +++ b/drivers/serial/pnx8xxx_uart.c @@ -0,0 +1,852 @@ +/* + * UART driver for PNX8XXX SoCs + * + * Author: Per Hallsmark per.hallsmark@mvista.com + * Ported to 2.6 kernel by EmbeddedAlley + * Reworked by Vitaly Wool + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of + * any kind, whether express or implied. + * + */ + +#if defined(CONFIG_SERIAL_PNX8XXX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +/* We'll be using StrongARM sa1100 serial port major/minor */ +#define SERIAL_PNX8XXX_MAJOR 204 +#define MINOR_START 5 + +#define NR_PORTS 2 + +#define PNX8XXX_ISR_PASS_LIMIT 256 + +/* + * Convert from ignore_status_mask or read_status_mask to FIFO + * and interrupt status bits + */ +#define SM_TO_FIFO(x) ((x) >> 10) +#define SM_TO_ISTAT(x) ((x) & 0x000001ff) +#define FIFO_TO_SM(x) ((x) << 10) +#define ISTAT_TO_SM(x) ((x) & 0x000001ff) + +/* + * This is the size of our serial port register set. + */ +#define UART_PORT_SIZE 0x1000 + +/* + * This determines how often we check the modem status signals + * for any change. They generally aren't connected to an IRQ + * so we have to poll them. We also check immediately before + * filling the TX fifo incase CTS has been dropped. + */ +#define MCTRL_TIMEOUT (250*HZ/1000) + +extern struct pnx8xxx_port pnx8xxx_ports[]; + +static inline int serial_in(struct pnx8xxx_port *sport, int offset) +{ + return (__raw_readl(sport->port.membase + offset)); +} + +static inline void serial_out(struct pnx8xxx_port *sport, int offset, int value) +{ + __raw_writel(value, sport->port.membase + offset); +} + +/* + * Handle any change of modem status signal since we were last called. + */ +static void pnx8xxx_mctrl_check(struct pnx8xxx_port *sport) +{ + unsigned int status, changed; + + status = sport->port.ops->get_mctrl(&sport->port); + changed = status ^ sport->old_status; + + if (changed == 0) + return; + + sport->old_status = status; + + if (changed & TIOCM_RI) + sport->port.icount.rng++; + if (changed & TIOCM_DSR) + sport->port.icount.dsr++; + if (changed & TIOCM_CAR) + uart_handle_dcd_change(&sport->port, status & TIOCM_CAR); + if (changed & TIOCM_CTS) + uart_handle_cts_change(&sport->port, status & TIOCM_CTS); + + wake_up_interruptible(&sport->port.info->delta_msr_wait); +} + +/* + * This is our per-port timeout handler, for checking the + * modem status signals. + */ +static void pnx8xxx_timeout(unsigned long data) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)data; + unsigned long flags; + + if (sport->port.info) { + spin_lock_irqsave(&sport->port.lock, flags); + pnx8xxx_mctrl_check(sport); + spin_unlock_irqrestore(&sport->port.lock, flags); + + mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT); + } +} + +/* + * interrupts disabled on entry + */ +static void pnx8xxx_stop_tx(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + u32 ien; + + /* Disable TX intr */ + ien = serial_in(sport, PNX8XXX_IEN); + serial_out(sport, PNX8XXX_IEN, ien & ~PNX8XXX_UART_INT_ALLTX); + + /* Clear all pending TX intr */ + serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLTX); +} + +/* + * interrupts may not be disabled on entry + */ +static void pnx8xxx_start_tx(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + u32 ien; + + /* Clear all pending TX intr */ + serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLTX); + + /* Enable TX intr */ + ien = serial_in(sport, PNX8XXX_IEN); + serial_out(sport, PNX8XXX_IEN, ien | PNX8XXX_UART_INT_ALLTX); +} + +/* + * Interrupts enabled + */ +static void pnx8xxx_stop_rx(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + u32 ien; + + /* Disable RX intr */ + ien = serial_in(sport, PNX8XXX_IEN); + serial_out(sport, PNX8XXX_IEN, ien & ~PNX8XXX_UART_INT_ALLRX); + + /* Clear all pending RX intr */ + serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX); +} + +/* + * Set the modem control timer to fire immediately. + */ +static void pnx8xxx_enable_ms(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + + mod_timer(&sport->timer, jiffies); +} + +static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport) +{ + struct tty_struct *tty = sport->port.info->tty; + unsigned int status, ch, flg; + + status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) | + ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT)); + while (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFIFO)) { + ch = serial_in(sport, PNX8XXX_FIFO); + + sport->port.icount.rx++; + + flg = TTY_NORMAL; + + /* + * note that the error handling code is + * out of the main execution path + */ + if (status & (FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE | + PNX8XXX_UART_FIFO_RXPAR) | + ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN))) { + if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR)) + sport->port.icount.parity++; + else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE)) + sport->port.icount.frame++; + if (status & ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN)) + sport->port.icount.overrun++; + + status &= sport->port.read_status_mask; + + if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR)) + flg = TTY_PARITY; + else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE)) + flg = TTY_FRAME; + +#ifdef SUPPORT_SYSRQ + sport->port.sysrq = 0; +#endif + } + + if (uart_handle_sysrq_char(&sport->port, ch)) + goto ignore_char; + + uart_insert_char(&sport->port, status, + ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN), ch, flg); + + ignore_char: + serial_out(sport, PNX8XXX_LCR, serial_in(sport, PNX8XXX_LCR) | + PNX8XXX_UART_LCR_RX_NEXT); + status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) | + ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT)); + } + tty_flip_buffer_push(tty); +} + +static void pnx8xxx_tx_chars(struct pnx8xxx_port *sport) +{ + struct circ_buf *xmit = &sport->port.info->xmit; + + if (sport->port.x_char) { + serial_out(sport, PNX8XXX_FIFO, sport->port.x_char); + sport->port.icount.tx++; + sport->port.x_char = 0; + return; + } + + /* + * Check the modem control lines before + * transmitting anything. + */ + pnx8xxx_mctrl_check(sport); + + if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { + pnx8xxx_stop_tx(&sport->port); + return; + } + + /* + * TX while bytes available + */ + while (((serial_in(sport, PNX8XXX_FIFO) & + PNX8XXX_UART_FIFO_TXFIFO) >> 16) < 16) { + serial_out(sport, PNX8XXX_FIFO, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + sport->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + + if (uart_circ_empty(xmit)) + pnx8xxx_stop_tx(&sport->port); +} + +static irqreturn_t pnx8xxx_int(int irq, void *dev_id) +{ + struct pnx8xxx_port *sport = dev_id; + unsigned int status; + + spin_lock(&sport->port.lock); + /* Get the interrupts */ + status = serial_in(sport, PNX8XXX_ISTAT) & serial_in(sport, PNX8XXX_IEN); + + /* Break signal received */ + if (status & PNX8XXX_UART_INT_BREAK) { + sport->port.icount.brk++; + uart_handle_break(&sport->port); + } + + /* Byte received */ + if (status & PNX8XXX_UART_INT_RX) + pnx8xxx_rx_chars(sport); + + /* TX holding register empty - transmit a byte */ + if (status & PNX8XXX_UART_INT_TX) + pnx8xxx_tx_chars(sport); + + /* Clear the ISTAT register */ + serial_out(sport, PNX8XXX_ICLR, status); + + spin_unlock(&sport->port.lock); + return IRQ_HANDLED; +} + +/* + * Return TIOCSER_TEMT when transmitter is not busy. + */ +static unsigned int pnx8xxx_tx_empty(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + + return serial_in(sport, PNX8XXX_FIFO) & PNX8XXX_UART_FIFO_TXFIFO_STA ? 0 : TIOCSER_TEMT; +} + +static unsigned int pnx8xxx_get_mctrl(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + unsigned int mctrl = TIOCM_DSR; + unsigned int msr; + + /* REVISIT */ + + msr = serial_in(sport, PNX8XXX_MCR); + + mctrl |= msr & PNX8XXX_UART_MCR_CTS ? TIOCM_CTS : 0; + mctrl |= msr & PNX8XXX_UART_MCR_DCD ? TIOCM_CAR : 0; + + return mctrl; +} + +static void pnx8xxx_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +#if 0 /* FIXME */ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + unsigned int msr; +#endif +} + +/* + * Interrupts always disabled. + */ +static void pnx8xxx_break_ctl(struct uart_port *port, int break_state) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + unsigned long flags; + unsigned int lcr; + + spin_lock_irqsave(&sport->port.lock, flags); + lcr = serial_in(sport, PNX8XXX_LCR); + if (break_state == -1) + lcr |= PNX8XXX_UART_LCR_TXBREAK; + else + lcr &= ~PNX8XXX_UART_LCR_TXBREAK; + serial_out(sport, PNX8XXX_LCR, lcr); + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static int pnx8xxx_startup(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + int retval; + + /* + * Allocate the IRQ + */ + retval = request_irq(sport->port.irq, pnx8xxx_int, 0, + "pnx8xxx-uart", sport); + if (retval) + return retval; + + /* + * Finally, clear and enable interrupts + */ + + serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX | + PNX8XXX_UART_INT_ALLTX); + + serial_out(sport, PNX8XXX_IEN, serial_in(sport, PNX8XXX_IEN) | + PNX8XXX_UART_INT_ALLRX | + PNX8XXX_UART_INT_ALLTX); + + /* + * Enable modem status interrupts + */ + spin_lock_irq(&sport->port.lock); + pnx8xxx_enable_ms(&sport->port); + spin_unlock_irq(&sport->port.lock); + + return 0; +} + +static void pnx8xxx_shutdown(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + int lcr; + + /* + * Stop our timer. + */ + del_timer_sync(&sport->timer); + + /* + * Disable all interrupts + */ + serial_out(sport, PNX8XXX_IEN, 0); + + /* + * Reset the Tx and Rx FIFOS, disable the break condition + */ + lcr = serial_in(sport, PNX8XXX_LCR); + lcr &= ~PNX8XXX_UART_LCR_TXBREAK; + lcr |= PNX8XXX_UART_LCR_TX_RST | PNX8XXX_UART_LCR_RX_RST; + serial_out(sport, PNX8XXX_LCR, lcr); + + /* + * Clear all interrupts + */ + serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX | + PNX8XXX_UART_INT_ALLTX); + + /* + * Free the interrupt + */ + free_irq(sport->port.irq, sport); +} + +static void +pnx8xxx_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + unsigned long flags; + unsigned int lcr_fcr, old_ien, baud, quot; + unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; + + /* + * We only support CS7 and CS8. + */ + while ((termios->c_cflag & CSIZE) != CS7 && + (termios->c_cflag & CSIZE) != CS8) { + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= old_csize; + old_csize = CS8; + } + + if ((termios->c_cflag & CSIZE) == CS8) + lcr_fcr = PNX8XXX_UART_LCR_8BIT; + else + lcr_fcr = 0; + + if (termios->c_cflag & CSTOPB) + lcr_fcr |= PNX8XXX_UART_LCR_2STOPB; + if (termios->c_cflag & PARENB) { + lcr_fcr |= PNX8XXX_UART_LCR_PAREN; + if (!(termios->c_cflag & PARODD)) + lcr_fcr |= PNX8XXX_UART_LCR_PAREVN; + } + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + spin_lock_irqsave(&sport->port.lock, flags); + + sport->port.read_status_mask = ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN) | + ISTAT_TO_SM(PNX8XXX_UART_INT_EMPTY) | + ISTAT_TO_SM(PNX8XXX_UART_INT_RX); + if (termios->c_iflag & INPCK) + sport->port.read_status_mask |= + FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) | + FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR); + if (termios->c_iflag & (BRKINT | PARMRK)) + sport->port.read_status_mask |= + ISTAT_TO_SM(PNX8XXX_UART_INT_BREAK); + + /* + * Characters to ignore + */ + sport->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= + FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) | + FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR); + if (termios->c_iflag & IGNBRK) { + sport->port.ignore_status_mask |= + ISTAT_TO_SM(PNX8XXX_UART_INT_BREAK); + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= + ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN); + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + sport->port.ignore_status_mask |= + ISTAT_TO_SM(PNX8XXX_UART_INT_RX); + + del_timer_sync(&sport->timer); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* + * disable interrupts and drain transmitter + */ + old_ien = serial_in(sport, PNX8XXX_IEN); + serial_out(sport, PNX8XXX_IEN, old_ien & ~(PNX8XXX_UART_INT_ALLTX | + PNX8XXX_UART_INT_ALLRX)); + + while (serial_in(sport, PNX8XXX_FIFO) & PNX8XXX_UART_FIFO_TXFIFO_STA) + barrier(); + + /* then, disable everything */ + serial_out(sport, PNX8XXX_IEN, 0); + + /* Reset the Rx and Tx FIFOs too */ + lcr_fcr |= PNX8XXX_UART_LCR_TX_RST; + lcr_fcr |= PNX8XXX_UART_LCR_RX_RST; + + /* set the parity, stop bits and data size */ + serial_out(sport, PNX8XXX_LCR, lcr_fcr); + + /* set the baud rate */ + quot -= 1; + serial_out(sport, PNX8XXX_BAUD, quot); + + serial_out(sport, PNX8XXX_ICLR, -1); + + serial_out(sport, PNX8XXX_IEN, old_ien); + + if (UART_ENABLE_MS(&sport->port, termios->c_cflag)) + pnx8xxx_enable_ms(&sport->port); + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static const char *pnx8xxx_type(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + + return sport->port.type == PORT_PNX8XXX ? "PNX8XXX" : NULL; +} + +/* + * Release the memory region(s) being used by 'port'. + */ +static void pnx8xxx_release_port(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + + release_mem_region(sport->port.mapbase, UART_PORT_SIZE); +} + +/* + * Request the memory region(s) being used by 'port'. + */ +static int pnx8xxx_request_port(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + return request_mem_region(sport->port.mapbase, UART_PORT_SIZE, + "pnx8xxx-uart") != NULL ? 0 : -EBUSY; +} + +/* + * Configure/autoconfigure the port. + */ +static void pnx8xxx_config_port(struct uart_port *port, int flags) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + + if (flags & UART_CONFIG_TYPE && + pnx8xxx_request_port(&sport->port) == 0) + sport->port.type = PORT_PNX8XXX; +} + +/* + * Verify the new serial_struct (for TIOCSSERIAL). + * The only change we allow are to the flags and type, and + * even then only between PORT_PNX8XXX and PORT_UNKNOWN + */ +static int +pnx8xxx_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_PNX8XXX) + ret = -EINVAL; + if (sport->port.irq != ser->irq) + ret = -EINVAL; + if (ser->io_type != SERIAL_IO_MEM) + ret = -EINVAL; + if (sport->port.uartclk / 16 != ser->baud_base) + ret = -EINVAL; + if ((void *)sport->port.mapbase != ser->iomem_base) + ret = -EINVAL; + if (sport->port.iobase != ser->port) + ret = -EINVAL; + if (ser->hub6 != 0) + ret = -EINVAL; + return ret; +} + +static struct uart_ops pnx8xxx_pops = { + .tx_empty = pnx8xxx_tx_empty, + .set_mctrl = pnx8xxx_set_mctrl, + .get_mctrl = pnx8xxx_get_mctrl, + .stop_tx = pnx8xxx_stop_tx, + .start_tx = pnx8xxx_start_tx, + .stop_rx = pnx8xxx_stop_rx, + .enable_ms = pnx8xxx_enable_ms, + .break_ctl = pnx8xxx_break_ctl, + .startup = pnx8xxx_startup, + .shutdown = pnx8xxx_shutdown, + .set_termios = pnx8xxx_set_termios, + .type = pnx8xxx_type, + .release_port = pnx8xxx_release_port, + .request_port = pnx8xxx_request_port, + .config_port = pnx8xxx_config_port, + .verify_port = pnx8xxx_verify_port, +}; + + +/* + * Setup the PNX8XXX serial ports. + * + * Note also that we support "console=ttySx" where "x" is either 0 or 1. + */ +static void __init pnx8xxx_init_ports(void) +{ + static int first = 1; + int i; + + if (!first) + return; + first = 0; + + for (i = 0; i < NR_PORTS; i++) { + init_timer(&pnx8xxx_ports[i].timer); + pnx8xxx_ports[i].timer.function = pnx8xxx_timeout; + pnx8xxx_ports[i].timer.data = (unsigned long)&pnx8xxx_ports[i]; + pnx8xxx_ports[i].port.ops = &pnx8xxx_pops; + } +} + +#ifdef CONFIG_SERIAL_PNX8XXX_CONSOLE + +static void pnx8xxx_console_putchar(struct uart_port *port, int ch) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + int status; + + do { + /* Wait for UART_TX register to empty */ + status = serial_in(sport, PNX8XXX_FIFO); + } while (status & PNX8XXX_UART_FIFO_TXFIFO); + serial_out(sport, PNX8XXX_FIFO, ch); +} + +/* + * Interrupts are disabled on entering + */static void +pnx8xxx_console_write(struct console *co, const char *s, unsigned int count) +{ + struct pnx8xxx_port *sport = &pnx8xxx_ports[co->index]; + unsigned int old_ien, status; + + /* + * First, save IEN and then disable interrupts + */ + old_ien = serial_in(sport, PNX8XXX_IEN); + serial_out(sport, PNX8XXX_IEN, old_ien & ~(PNX8XXX_UART_INT_ALLTX | + PNX8XXX_UART_INT_ALLRX)); + + uart_console_write(&sport->port, s, count, pnx8xxx_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore IEN + */ + do { + /* Wait for UART_TX register to empty */ + status = serial_in(sport, PNX8XXX_FIFO); + } while (status & PNX8XXX_UART_FIFO_TXFIFO); + + /* Clear TX and EMPTY interrupt */ + serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_TX | + PNX8XXX_UART_INT_EMPTY); + + serial_out(sport, PNX8XXX_IEN, old_ien); +} + +static int __init +pnx8xxx_console_setup(struct console *co, char *options) +{ + struct pnx8xxx_port *sport; + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index == -1 || co->index >= NR_PORTS) + co->index = 0; + sport = &pnx8xxx_ports[co->index]; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&sport->port, co, baud, parity, bits, flow); +} + +static struct uart_driver pnx8xxx_reg; +static struct console pnx8xxx_console = { + .name = "ttyS", + .write = pnx8xxx_console_write, + .device = uart_console_device, + .setup = pnx8xxx_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &pnx8xxx_reg, +}; + +static int __init pnx8xxx_rs_console_init(void) +{ + pnx8xxx_init_ports(); + register_console(&pnx8xxx_console); + return 0; +} +console_initcall(pnx8xxx_rs_console_init); + +#define PNX8XXX_CONSOLE &pnx8xxx_console +#else +#define PNX8XXX_CONSOLE NULL +#endif + +static struct uart_driver pnx8xxx_reg = { + .owner = THIS_MODULE, + .driver_name = "ttyS", + .dev_name = "ttyS", + .major = SERIAL_PNX8XXX_MAJOR, + .minor = MINOR_START, + .nr = NR_PORTS, + .cons = PNX8XXX_CONSOLE, +}; + +static int pnx8xxx_serial_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct pnx8xxx_port *sport = platform_get_drvdata(pdev); + + return uart_suspend_port(&pnx8xxx_reg, &sport->port); +} + +static int pnx8xxx_serial_resume(struct platform_device *pdev) +{ + struct pnx8xxx_port *sport = platform_get_drvdata(pdev); + + return uart_resume_port(&pnx8xxx_reg, &sport->port); +} + +static int pnx8xxx_serial_probe(struct platform_device *pdev) +{ + struct resource *res = pdev->resource; + int i; + + for (i = 0; i < pdev->num_resources; i++, res++) { + if (!(res->flags & IORESOURCE_MEM)) + continue; + + for (i = 0; i < NR_PORTS; i++) { + if (pnx8xxx_ports[i].port.mapbase != res->start) + continue; + + pnx8xxx_ports[i].port.dev = &pdev->dev; + uart_add_one_port(&pnx8xxx_reg, &pnx8xxx_ports[i].port); + platform_set_drvdata(pdev, &pnx8xxx_ports[i]); + break; + } + } + + return 0; +} + +static int pnx8xxx_serial_remove(struct platform_device *pdev) +{ + struct pnx8xxx_port *sport = platform_get_drvdata(pdev); + + platform_set_drvdata(pdev, NULL); + + if (sport) + uart_remove_one_port(&pnx8xxx_reg, &sport->port); + + return 0; +} + +static struct platform_driver pnx8xxx_serial_driver = { + .driver = { + .name = "pnx8xxx-uart", + .owner = THIS_MODULE, + }, + .probe = pnx8xxx_serial_probe, + .remove = pnx8xxx_serial_remove, + .suspend = pnx8xxx_serial_suspend, + .resume = pnx8xxx_serial_resume, +}; + +static int __init pnx8xxx_serial_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: PNX8XXX driver $Revision: 1.2 $\n"); + + pnx8xxx_init_ports(); + + ret = uart_register_driver(&pnx8xxx_reg); + if (ret == 0) { + ret = platform_driver_register(&pnx8xxx_serial_driver); + if (ret) + uart_unregister_driver(&pnx8xxx_reg); + } + return ret; +} + +static void __exit pnx8xxx_serial_exit(void) +{ + platform_driver_unregister(&pnx8xxx_serial_driver); + uart_unregister_driver(&pnx8xxx_reg); +} + +module_init(pnx8xxx_serial_init); +module_exit(pnx8xxx_serial_exit); + +MODULE_AUTHOR("Embedded Alley Solutions, Inc."); +MODULE_DESCRIPTION("PNX8XXX SoCs serial port driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_PNX8XXX_MAJOR); -- cgit v0.10.2 From 754ce4f29937ba11f16afa41a648a30b0fc1f075 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Wed, 14 Feb 2007 00:33:09 -0800 Subject: [PATCH] SPI: atmel_spi driver Driver for the Atmel on-chip SPI master controller. Tested primarily on AVR32/AT32AP7000/ATSTK1000 using mtd_dataflash and the jffs2 filesystem. Should also work fine on various AT91 ARM-based chips like AT91SAM926x and AT91RM9200. Hardware documentation can be found in the AT32AP7000 data sheet, or its AT91 siblings, which can be downloaded from http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 Signed-off-by: Haavard Skinnemoen Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 93a338d..9e6c9ff 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -620,6 +620,11 @@ P: Haavard Skinnemoen M: hskinnemoen@atmel.com S: Supported +ATMEL SPI DRIVER +P: Haavard Skinnemoen +M: hskinnemoen@atmel.com +S: Supported + ATMEL WIRELESS DRIVER P: Simon Kelley M: simon@thekelleys.org.uk diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 9052f4c..7e54e48e 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -51,6 +51,13 @@ config SPI_MASTER comment "SPI Master Controller Drivers" depends on SPI_MASTER +config SPI_ATMEL + tristate "Atmel SPI Controller" + depends on (ARCH_AT91 || AVR32) && SPI_MASTER + help + This selects a driver for the Atmel SPI Controller, present on + many AT32 (AVR32) and AT91 (ARM) chips. + config SPI_BITBANG tristate "Bitbanging SPI master" depends on SPI_MASTER && EXPERIMENTAL diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index bf271fe..3c280ad 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_SPI_MASTER) += spi.o # SPI master controller drivers (bus) obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o +obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o obj-$(CONFIG_SPI_IMX) += spi_imx.o obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c new file mode 100644 index 0000000..c2a9fef --- /dev/null +++ b/drivers/spi/atmel_spi.c @@ -0,0 +1,678 @@ +/* + * Driver for Atmel AT32 and AT91 SPI Controllers + * + * Copyright (C) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "atmel_spi.h" + +/* + * The core SPI transfer engine just talks to a register bank to set up + * DMA transfers; transfer queue progress is driven by IRQs. The clock + * framework provides the base clock, subdivided for each spi_device. + * + * Newer controllers, marked with "new_1" flag, have: + * - CR.LASTXFER + * - SPI_MR.DIV32 may become FDIV or must-be-zero (here: always zero) + * - SPI_SR.TXEMPTY, SPI_SR.NSSR (and corresponding irqs) + * - SPI_CSRx.CSAAT + * - SPI_CSRx.SBCR allows faster clocking + */ +struct atmel_spi { + spinlock_t lock; + + void __iomem *regs; + int irq; + struct clk *clk; + struct platform_device *pdev; + unsigned new_1:1; + + u8 stopping; + struct list_head queue; + struct spi_transfer *current_transfer; + unsigned long remaining_bytes; + + void *buffer; + dma_addr_t buffer_dma; +}; + +#define BUFFER_SIZE PAGE_SIZE +#define INVALID_DMA_ADDRESS 0xffffffff + +/* + * Earlier SPI controllers (e.g. on at91rm9200) have a design bug whereby + * they assume that spi slave device state will not change on deselect, so + * that automagic deselection is OK. Not so! Workaround uses nCSx pins + * as GPIOs; or newer controllers have CSAAT and friends. + * + * Since the CSAAT functionality is a bit weird on newer controllers + * as well, we use GPIO to control nCSx pins on all controllers. + */ + +static inline void cs_activate(struct spi_device *spi) +{ + unsigned gpio = (unsigned) spi->controller_data; + unsigned active = spi->mode & SPI_CS_HIGH; + + dev_dbg(&spi->dev, "activate %u%s\n", gpio, active ? " (high)" : ""); + gpio_set_value(gpio, active); +} + +static inline void cs_deactivate(struct spi_device *spi) +{ + unsigned gpio = (unsigned) spi->controller_data; + unsigned active = spi->mode & SPI_CS_HIGH; + + dev_dbg(&spi->dev, "DEactivate %u%s\n", gpio, active ? " (low)" : ""); + gpio_set_value(gpio, !active); +} + +/* + * Submit next transfer for DMA. + * lock is held, spi irq is blocked + */ +static void atmel_spi_next_xfer(struct spi_master *master, + struct spi_message *msg) +{ + struct atmel_spi *as = spi_master_get_devdata(master); + struct spi_transfer *xfer; + u32 len; + dma_addr_t tx_dma, rx_dma; + + xfer = as->current_transfer; + if (!xfer || as->remaining_bytes == 0) { + if (xfer) + xfer = list_entry(xfer->transfer_list.next, + struct spi_transfer, transfer_list); + else + xfer = list_entry(msg->transfers.next, + struct spi_transfer, transfer_list); + as->remaining_bytes = xfer->len; + as->current_transfer = xfer; + } + + len = as->remaining_bytes; + + tx_dma = xfer->tx_dma; + rx_dma = xfer->rx_dma; + + /* use scratch buffer only when rx or tx data is unspecified */ + if (rx_dma == INVALID_DMA_ADDRESS) { + rx_dma = as->buffer_dma; + if (len > BUFFER_SIZE) + len = BUFFER_SIZE; + } + if (tx_dma == INVALID_DMA_ADDRESS) { + tx_dma = as->buffer_dma; + if (len > BUFFER_SIZE) + len = BUFFER_SIZE; + memset(as->buffer, 0, len); + dma_sync_single_for_device(&as->pdev->dev, + as->buffer_dma, len, DMA_TO_DEVICE); + } + + spi_writel(as, RPR, rx_dma); + spi_writel(as, TPR, tx_dma); + + as->remaining_bytes -= len; + if (msg->spi->bits_per_word > 8) + len >>= 1; + + /* REVISIT: when xfer->delay_usecs == 0, the PDC "next transfer" + * mechanism might help avoid the IRQ latency between transfers + * + * We're also waiting for ENDRX before we start the next + * transfer because we need to handle some difficult timing + * issues otherwise. If we wait for ENDTX in one transfer and + * then starts waiting for ENDRX in the next, it's difficult + * to tell the difference between the ENDRX interrupt we're + * actually waiting for and the ENDRX interrupt of the + * previous transfer. + * + * It should be doable, though. Just not now... + */ + spi_writel(as, TNCR, 0); + spi_writel(as, RNCR, 0); + spi_writel(as, IER, SPI_BIT(ENDRX) | SPI_BIT(OVRES)); + + dev_dbg(&msg->spi->dev, + " start xfer %p: len %u tx %p/%08x rx %p/%08x imr %03x\n", + xfer, xfer->len, xfer->tx_buf, xfer->tx_dma, + xfer->rx_buf, xfer->rx_dma, spi_readl(as, IMR)); + + spi_writel(as, TCR, len); + spi_writel(as, RCR, len); + spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN)); +} + +static void atmel_spi_next_message(struct spi_master *master) +{ + struct atmel_spi *as = spi_master_get_devdata(master); + struct spi_message *msg; + u32 mr; + + BUG_ON(as->current_transfer); + + msg = list_entry(as->queue.next, struct spi_message, queue); + + /* Select the chip */ + mr = spi_readl(as, MR); + mr = SPI_BFINS(PCS, ~(1 << msg->spi->chip_select), mr); + spi_writel(as, MR, mr); + cs_activate(msg->spi); + + atmel_spi_next_xfer(master, msg); +} + +static void +atmel_spi_dma_map_xfer(struct atmel_spi *as, struct spi_transfer *xfer) +{ + xfer->tx_dma = xfer->rx_dma = INVALID_DMA_ADDRESS; + if (xfer->tx_buf) + xfer->tx_dma = dma_map_single(&as->pdev->dev, + (void *) xfer->tx_buf, xfer->len, + DMA_TO_DEVICE); + if (xfer->rx_buf) + xfer->rx_dma = dma_map_single(&as->pdev->dev, + xfer->rx_buf, xfer->len, + DMA_FROM_DEVICE); +} + +static void atmel_spi_dma_unmap_xfer(struct spi_master *master, + struct spi_transfer *xfer) +{ + if (xfer->tx_dma != INVALID_DMA_ADDRESS) + dma_unmap_single(master->cdev.dev, xfer->tx_dma, + xfer->len, DMA_TO_DEVICE); + if (xfer->rx_dma != INVALID_DMA_ADDRESS) + dma_unmap_single(master->cdev.dev, xfer->rx_dma, + xfer->len, DMA_FROM_DEVICE); +} + +static void +atmel_spi_msg_done(struct spi_master *master, struct atmel_spi *as, + struct spi_message *msg, int status) +{ + cs_deactivate(msg->spi); + list_del(&msg->queue); + msg->status = status; + + dev_dbg(master->cdev.dev, + "xfer complete: %u bytes transferred\n", + msg->actual_length); + + spin_unlock(&as->lock); + msg->complete(msg->context); + spin_lock(&as->lock); + + as->current_transfer = NULL; + + /* continue if needed */ + if (list_empty(&as->queue) || as->stopping) + spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); + else + atmel_spi_next_message(master); +} + +static irqreturn_t +atmel_spi_interrupt(int irq, void *dev_id) +{ + struct spi_master *master = dev_id; + struct atmel_spi *as = spi_master_get_devdata(master); + struct spi_message *msg; + struct spi_transfer *xfer; + u32 status, pending, imr; + int ret = IRQ_NONE; + + spin_lock(&as->lock); + + xfer = as->current_transfer; + msg = list_entry(as->queue.next, struct spi_message, queue); + + imr = spi_readl(as, IMR); + status = spi_readl(as, SR); + pending = status & imr; + + if (pending & SPI_BIT(OVRES)) { + int timeout; + + ret = IRQ_HANDLED; + + spi_writel(as, IDR, (SPI_BIT(ENDTX) | SPI_BIT(ENDRX) + | SPI_BIT(OVRES))); + + /* + * When we get an overrun, we disregard the current + * transfer. Data will not be copied back from any + * bounce buffer and msg->actual_len will not be + * updated with the last xfer. + * + * We will also not process any remaning transfers in + * the message. + * + * First, stop the transfer and unmap the DMA buffers. + */ + spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); + if (!msg->is_dma_mapped) + atmel_spi_dma_unmap_xfer(master, xfer); + + /* REVISIT: udelay in irq is unfriendly */ + if (xfer->delay_usecs) + udelay(xfer->delay_usecs); + + dev_warn(master->cdev.dev, "fifo overrun (%u/%u remaining)\n", + spi_readl(as, TCR), spi_readl(as, RCR)); + + /* + * Clean up DMA registers and make sure the data + * registers are empty. + */ + spi_writel(as, RNCR, 0); + spi_writel(as, TNCR, 0); + spi_writel(as, RCR, 0); + spi_writel(as, TCR, 0); + for (timeout = 1000; timeout; timeout--) + if (spi_readl(as, SR) & SPI_BIT(TXEMPTY)) + break; + if (!timeout) + dev_warn(master->cdev.dev, + "timeout waiting for TXEMPTY"); + while (spi_readl(as, SR) & SPI_BIT(RDRF)) + spi_readl(as, RDR); + + /* Clear any overrun happening while cleaning up */ + spi_readl(as, SR); + + atmel_spi_msg_done(master, as, msg, -EIO); + } else if (pending & SPI_BIT(ENDRX)) { + ret = IRQ_HANDLED; + + spi_writel(as, IDR, pending); + + if (as->remaining_bytes == 0) { + msg->actual_length += xfer->len; + + if (!msg->is_dma_mapped) + atmel_spi_dma_unmap_xfer(master, xfer); + + /* REVISIT: udelay in irq is unfriendly */ + if (xfer->delay_usecs) + udelay(xfer->delay_usecs); + + if (msg->transfers.prev == &xfer->transfer_list) { + /* report completed message */ + atmel_spi_msg_done(master, as, msg, 0); + } else { + if (xfer->cs_change) { + cs_deactivate(msg->spi); + udelay(1); + cs_activate(msg->spi); + } + + /* + * Not done yet. Submit the next transfer. + * + * FIXME handle protocol options for xfer + */ + atmel_spi_next_xfer(master, msg); + } + } else { + /* + * Keep going, we still have data to send in + * the current transfer. + */ + atmel_spi_next_xfer(master, msg); + } + } + + spin_unlock(&as->lock); + + return ret; +} + +#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH) + +static int atmel_spi_setup(struct spi_device *spi) +{ + struct atmel_spi *as; + u32 scbr, csr; + unsigned int bits = spi->bits_per_word; + unsigned long bus_hz, sck_hz; + unsigned int npcs_pin; + int ret; + + as = spi_master_get_devdata(spi->master); + + if (as->stopping) + return -ESHUTDOWN; + + if (spi->chip_select > spi->master->num_chipselect) { + dev_dbg(&spi->dev, + "setup: invalid chipselect %u (%u defined)\n", + spi->chip_select, spi->master->num_chipselect); + return -EINVAL; + } + + if (bits == 0) + bits = 8; + if (bits < 8 || bits > 16) { + dev_dbg(&spi->dev, + "setup: invalid bits_per_word %u (8 to 16)\n", + bits); + return -EINVAL; + } + + if (spi->mode & ~MODEBITS) { + dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n", + spi->mode & ~MODEBITS); + return -EINVAL; + } + + /* speed zero convention is used by some upper layers */ + bus_hz = clk_get_rate(as->clk); + if (spi->max_speed_hz) { + /* assume div32/fdiv/mbz == 0 */ + if (!as->new_1) + bus_hz /= 2; + scbr = ((bus_hz + spi->max_speed_hz - 1) + / spi->max_speed_hz); + if (scbr >= (1 << SPI_SCBR_SIZE)) { + dev_dbg(&spi->dev, "setup: %d Hz too slow, scbr %u\n", + spi->max_speed_hz, scbr); + return -EINVAL; + } + } else + scbr = 0xff; + sck_hz = bus_hz / scbr; + + csr = SPI_BF(SCBR, scbr) | SPI_BF(BITS, bits - 8); + if (spi->mode & SPI_CPOL) + csr |= SPI_BIT(CPOL); + if (!(spi->mode & SPI_CPHA)) + csr |= SPI_BIT(NCPHA); + + /* TODO: DLYBS and DLYBCT */ + csr |= SPI_BF(DLYBS, 10); + csr |= SPI_BF(DLYBCT, 10); + + /* chipselect must have been muxed as GPIO (e.g. in board setup) */ + npcs_pin = (unsigned int)spi->controller_data; + if (!spi->controller_state) { + ret = gpio_request(npcs_pin, "spi_npcs"); + if (ret) + return ret; + spi->controller_state = (void *)npcs_pin; + gpio_direction_output(npcs_pin); + } + + dev_dbg(&spi->dev, + "setup: %lu Hz bpw %u mode 0x%x -> csr%d %08x\n", + sck_hz, bits, spi->mode, spi->chip_select, csr); + + spi_writel(as, CSR0 + 4 * spi->chip_select, csr); + + return 0; +} + +static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg) +{ + struct atmel_spi *as; + struct spi_transfer *xfer; + unsigned long flags; + struct device *controller = spi->master->cdev.dev; + + as = spi_master_get_devdata(spi->master); + + dev_dbg(controller, "new message %p submitted for %s\n", + msg, spi->dev.bus_id); + + if (unlikely(list_empty(&msg->transfers) + || !spi->max_speed_hz)) + return -EINVAL; + + if (as->stopping) + return -ESHUTDOWN; + + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + if (!(xfer->tx_buf || xfer->rx_buf)) { + dev_dbg(&spi->dev, "missing rx or tx buf\n"); + return -EINVAL; + } + + /* FIXME implement these protocol options!! */ + if (xfer->bits_per_word || xfer->speed_hz) { + dev_dbg(&spi->dev, "no protocol options yet\n"); + return -ENOPROTOOPT; + } + } + + /* scrub dcache "early" */ + if (!msg->is_dma_mapped) { + list_for_each_entry(xfer, &msg->transfers, transfer_list) + atmel_spi_dma_map_xfer(as, xfer); + } + + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + dev_dbg(controller, + " xfer %p: len %u tx %p/%08x rx %p/%08x\n", + xfer, xfer->len, + xfer->tx_buf, xfer->tx_dma, + xfer->rx_buf, xfer->rx_dma); + } + + msg->status = -EINPROGRESS; + msg->actual_length = 0; + + spin_lock_irqsave(&as->lock, flags); + list_add_tail(&msg->queue, &as->queue); + if (!as->current_transfer) + atmel_spi_next_message(spi->master); + spin_unlock_irqrestore(&as->lock, flags); + + return 0; +} + +static void atmel_spi_cleanup(const struct spi_device *spi) +{ + if (spi->controller_state) + gpio_free((unsigned int)spi->controller_data); +} + +/*-------------------------------------------------------------------------*/ + +static int __init atmel_spi_probe(struct platform_device *pdev) +{ + struct resource *regs; + int irq; + struct clk *clk; + int ret; + struct spi_master *master; + struct atmel_spi *as; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) + return -ENXIO; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + clk = clk_get(&pdev->dev, "spi_clk"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + /* setup spi core then atmel-specific driver state */ + ret = -ENOMEM; + master = spi_alloc_master(&pdev->dev, sizeof *as); + if (!master) + goto out_free; + + master->bus_num = pdev->id; + master->num_chipselect = 4; + master->setup = atmel_spi_setup; + master->transfer = atmel_spi_transfer; + master->cleanup = atmel_spi_cleanup; + platform_set_drvdata(pdev, master); + + as = spi_master_get_devdata(master); + + as->buffer = dma_alloc_coherent(&pdev->dev, BUFFER_SIZE, + &as->buffer_dma, GFP_KERNEL); + if (!as->buffer) + goto out_free; + + spin_lock_init(&as->lock); + INIT_LIST_HEAD(&as->queue); + as->pdev = pdev; + as->regs = ioremap(regs->start, (regs->end - regs->start) + 1); + if (!as->regs) + goto out_free_buffer; + as->irq = irq; + as->clk = clk; +#ifdef CONFIG_ARCH_AT91 + if (!cpu_is_at91rm9200()) + as->new_1 = 1; +#endif + + ret = request_irq(irq, atmel_spi_interrupt, 0, + pdev->dev.bus_id, master); + if (ret) + goto out_unmap_regs; + + /* Initialize the hardware */ + clk_enable(clk); + spi_writel(as, CR, SPI_BIT(SWRST)); + spi_writel(as, MR, SPI_BIT(MSTR) | SPI_BIT(MODFDIS)); + spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); + spi_writel(as, CR, SPI_BIT(SPIEN)); + + /* go! */ + dev_info(&pdev->dev, "Atmel SPI Controller at 0x%08lx (irq %d)\n", + (unsigned long)regs->start, irq); + + ret = spi_register_master(master); + if (ret) + goto out_reset_hw; + + return 0; + +out_reset_hw: + spi_writel(as, CR, SPI_BIT(SWRST)); + clk_disable(clk); + free_irq(irq, master); +out_unmap_regs: + iounmap(as->regs); +out_free_buffer: + dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer, + as->buffer_dma); +out_free: + clk_put(clk); + spi_master_put(master); + return ret; +} + +static int __exit atmel_spi_remove(struct platform_device *pdev) +{ + struct spi_master *master = platform_get_drvdata(pdev); + struct atmel_spi *as = spi_master_get_devdata(master); + struct spi_message *msg; + + /* reset the hardware and block queue progress */ + spin_lock_irq(&as->lock); + as->stopping = 1; + spi_writel(as, CR, SPI_BIT(SWRST)); + spi_readl(as, SR); + spin_unlock_irq(&as->lock); + + /* Terminate remaining queued transfers */ + list_for_each_entry(msg, &as->queue, queue) { + /* REVISIT unmapping the dma is a NOP on ARM and AVR32 + * but we shouldn't depend on that... + */ + msg->status = -ESHUTDOWN; + msg->complete(msg->context); + } + + dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer, + as->buffer_dma); + + clk_disable(as->clk); + clk_put(as->clk); + free_irq(as->irq, master); + iounmap(as->regs); + + spi_unregister_master(master); + + return 0; +} + +#ifdef CONFIG_PM + +static int atmel_spi_suspend(struct platform_device *pdev, pm_message_t mesg) +{ + struct spi_master *master = platform_get_drvdata(pdev); + struct atmel_spi *as = spi_master_get_devdata(master); + + clk_disable(as->clk); + return 0; +} + +static int atmel_spi_resume(struct platform_device *pdev) +{ + struct spi_master *master = platform_get_drvdata(pdev); + struct atmel_spi *as = spi_master_get_devdata(master); + + clk_enable(as->clk); + return 0; +} + +#else +#define atmel_spi_suspend NULL +#define atmel_spi_resume NULL +#endif + + +static struct platform_driver atmel_spi_driver = { + .driver = { + .name = "atmel_spi", + .owner = THIS_MODULE, + }, + .suspend = atmel_spi_suspend, + .resume = atmel_spi_resume, + .remove = __exit_p(atmel_spi_remove), +}; + +static int __init atmel_spi_init(void) +{ + return platform_driver_probe(&atmel_spi_driver, atmel_spi_probe); +} +module_init(atmel_spi_init); + +static void __exit atmel_spi_exit(void) +{ + platform_driver_unregister(&atmel_spi_driver); +} +module_exit(atmel_spi_exit); + +MODULE_DESCRIPTION("Atmel AT32/AT91 SPI Controller driver"); +MODULE_AUTHOR("Haavard Skinnemoen "); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/atmel_spi.h b/drivers/spi/atmel_spi.h new file mode 100644 index 0000000..6e06b6a --- /dev/null +++ b/drivers/spi/atmel_spi.h @@ -0,0 +1,167 @@ +/* + * Register definitions for Atmel Serial Peripheral Interface (SPI) + * + * Copyright (C) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ATMEL_SPI_H__ +#define __ATMEL_SPI_H__ + +/* SPI register offsets */ +#define SPI_CR 0x0000 +#define SPI_MR 0x0004 +#define SPI_RDR 0x0008 +#define SPI_TDR 0x000c +#define SPI_SR 0x0010 +#define SPI_IER 0x0014 +#define SPI_IDR 0x0018 +#define SPI_IMR 0x001c +#define SPI_CSR0 0x0030 +#define SPI_CSR1 0x0034 +#define SPI_CSR2 0x0038 +#define SPI_CSR3 0x003c +#define SPI_RPR 0x0100 +#define SPI_RCR 0x0104 +#define SPI_TPR 0x0108 +#define SPI_TCR 0x010c +#define SPI_RNPR 0x0110 +#define SPI_RNCR 0x0114 +#define SPI_TNPR 0x0118 +#define SPI_TNCR 0x011c +#define SPI_PTCR 0x0120 +#define SPI_PTSR 0x0124 + +/* Bitfields in CR */ +#define SPI_SPIEN_OFFSET 0 +#define SPI_SPIEN_SIZE 1 +#define SPI_SPIDIS_OFFSET 1 +#define SPI_SPIDIS_SIZE 1 +#define SPI_SWRST_OFFSET 7 +#define SPI_SWRST_SIZE 1 +#define SPI_LASTXFER_OFFSET 24 +#define SPI_LASTXFER_SIZE 1 + +/* Bitfields in MR */ +#define SPI_MSTR_OFFSET 0 +#define SPI_MSTR_SIZE 1 +#define SPI_PS_OFFSET 1 +#define SPI_PS_SIZE 1 +#define SPI_PCSDEC_OFFSET 2 +#define SPI_PCSDEC_SIZE 1 +#define SPI_FDIV_OFFSET 3 +#define SPI_FDIV_SIZE 1 +#define SPI_MODFDIS_OFFSET 4 +#define SPI_MODFDIS_SIZE 1 +#define SPI_LLB_OFFSET 7 +#define SPI_LLB_SIZE 1 +#define SPI_PCS_OFFSET 16 +#define SPI_PCS_SIZE 4 +#define SPI_DLYBCS_OFFSET 24 +#define SPI_DLYBCS_SIZE 8 + +/* Bitfields in RDR */ +#define SPI_RD_OFFSET 0 +#define SPI_RD_SIZE 16 + +/* Bitfields in TDR */ +#define SPI_TD_OFFSET 0 +#define SPI_TD_SIZE 16 + +/* Bitfields in SR */ +#define SPI_RDRF_OFFSET 0 +#define SPI_RDRF_SIZE 1 +#define SPI_TDRE_OFFSET 1 +#define SPI_TDRE_SIZE 1 +#define SPI_MODF_OFFSET 2 +#define SPI_MODF_SIZE 1 +#define SPI_OVRES_OFFSET 3 +#define SPI_OVRES_SIZE 1 +#define SPI_ENDRX_OFFSET 4 +#define SPI_ENDRX_SIZE 1 +#define SPI_ENDTX_OFFSET 5 +#define SPI_ENDTX_SIZE 1 +#define SPI_RXBUFF_OFFSET 6 +#define SPI_RXBUFF_SIZE 1 +#define SPI_TXBUFE_OFFSET 7 +#define SPI_TXBUFE_SIZE 1 +#define SPI_NSSR_OFFSET 8 +#define SPI_NSSR_SIZE 1 +#define SPI_TXEMPTY_OFFSET 9 +#define SPI_TXEMPTY_SIZE 1 +#define SPI_SPIENS_OFFSET 16 +#define SPI_SPIENS_SIZE 1 + +/* Bitfields in CSR0 */ +#define SPI_CPOL_OFFSET 0 +#define SPI_CPOL_SIZE 1 +#define SPI_NCPHA_OFFSET 1 +#define SPI_NCPHA_SIZE 1 +#define SPI_CSAAT_OFFSET 3 +#define SPI_CSAAT_SIZE 1 +#define SPI_BITS_OFFSET 4 +#define SPI_BITS_SIZE 4 +#define SPI_SCBR_OFFSET 8 +#define SPI_SCBR_SIZE 8 +#define SPI_DLYBS_OFFSET 16 +#define SPI_DLYBS_SIZE 8 +#define SPI_DLYBCT_OFFSET 24 +#define SPI_DLYBCT_SIZE 8 + +/* Bitfields in RCR */ +#define SPI_RXCTR_OFFSET 0 +#define SPI_RXCTR_SIZE 16 + +/* Bitfields in TCR */ +#define SPI_TXCTR_OFFSET 0 +#define SPI_TXCTR_SIZE 16 + +/* Bitfields in RNCR */ +#define SPI_RXNCR_OFFSET 0 +#define SPI_RXNCR_SIZE 16 + +/* Bitfields in TNCR */ +#define SPI_TXNCR_OFFSET 0 +#define SPI_TXNCR_SIZE 16 + +/* Bitfields in PTCR */ +#define SPI_RXTEN_OFFSET 0 +#define SPI_RXTEN_SIZE 1 +#define SPI_RXTDIS_OFFSET 1 +#define SPI_RXTDIS_SIZE 1 +#define SPI_TXTEN_OFFSET 8 +#define SPI_TXTEN_SIZE 1 +#define SPI_TXTDIS_OFFSET 9 +#define SPI_TXTDIS_SIZE 1 + +/* Constants for BITS */ +#define SPI_BITS_8_BPT 0 +#define SPI_BITS_9_BPT 1 +#define SPI_BITS_10_BPT 2 +#define SPI_BITS_11_BPT 3 +#define SPI_BITS_12_BPT 4 +#define SPI_BITS_13_BPT 5 +#define SPI_BITS_14_BPT 6 +#define SPI_BITS_15_BPT 7 +#define SPI_BITS_16_BPT 8 + +/* Bit manipulation macros */ +#define SPI_BIT(name) \ + (1 << SPI_##name##_OFFSET) +#define SPI_BF(name,value) \ + (((value) & ((1 << SPI_##name##_SIZE) - 1)) << SPI_##name##_OFFSET) +#define SPI_BFEXT(name,value) \ + (((value) >> SPI_##name##_OFFSET) & ((1 << SPI_##name##_SIZE) - 1)) +#define SPI_BFINS(name,value,old) \ + ( ((old) & ~(((1 << SPI_##name##_SIZE) - 1) << SPI_##name##_OFFSET)) \ + | SPI_BF(name,value)) + +/* Register access macros */ +#define spi_readl(port,reg) \ + __raw_readl((port)->regs + SPI_##reg) +#define spi_writel(port,reg,value) \ + __raw_writel((value), (port)->regs + SPI_##reg) + +#endif /* __ATMEL_SPI_H__ */ -- cgit v0.10.2 From 8971a1016b9db4164c3c1b47ae1fde2818becf91 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 14 Feb 2007 00:33:11 -0800 Subject: [PATCH] knfsd: fix return value for writes to some files in 'nfsd' filesystem Most files in the 'nfsd' filesystem are transactional. When you write, a reply is generated that can be read back only on the same 'file'. If the reply has zero length, the 'write' will incorrectly return a value of '0' instead of the length that was written. This causes 'rpc.nfsd' to give an annoying warning. This patch fixes the test. Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c index eedf2e3..71c686d 100644 --- a/fs/nfsd/nfsctl.c +++ b/fs/nfsd/nfsctl.c @@ -123,7 +123,7 @@ static ssize_t nfsctl_transaction_write(struct file *file, const char __user *bu return PTR_ERR(data); rv = write_op[ino](file, data, size); - if (rv>0) { + if (rv >= 0) { simple_transaction_set(file, rv); rv = size; } -- cgit v0.10.2 From 982aedfd091e6d9831216f8519f12242091be4fd Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 14 Feb 2007 00:33:11 -0800 Subject: [PATCH] knfsd: tidy up choice of filesystem-identifier when creating a filehandle If we are using the same version/fsid as a current filehandle, then there is no need to verify the the numbers are valid for this export, and they must be (we used them to find this export). This allows us to simplify the fsid selection code. Also change "ref_fh_version" and "ref_fh_fsid_type" to "version" and "fsid_type", as the important thing isn't that they are the version/type of the reference filehandle, but they are the chosen type for the new filehandle. And tidy up some indenting. Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/nfsd/nfsfh.c b/fs/nfsd/nfsfh.c index a0b4282..12c5e74 100644 --- a/fs/nfsd/nfsfh.c +++ b/fs/nfsd/nfsfh.c @@ -212,7 +212,7 @@ fh_verify(struct svc_rqst *rqstp, struct svc_fh *fhp, int type, int access) fileid_type = 2; } else fileid_type = fh->fh_fileid_type; - + if (fileid_type == 0) dentry = dget(exp->ex_dentry); else { @@ -292,7 +292,7 @@ static inline int _fh_update(struct dentry *dentry, struct svc_export *exp, __u32 *datap, int *maxsize) { struct export_operations *nop = exp->ex_mnt->mnt_sb->s_export_op; - + if (dentry == exp->ex_dentry) { *maxsize = 0; return 0; @@ -317,7 +317,8 @@ static inline void _fh_update_old(struct dentry *dentry, } __be32 -fh_compose(struct svc_fh *fhp, struct svc_export *exp, struct dentry *dentry, struct svc_fh *ref_fh) +fh_compose(struct svc_fh *fhp, struct svc_export *exp, struct dentry *dentry, + struct svc_fh *ref_fh) { /* ref_fh is a reference file handle. * if it is non-null and for the same filesystem, then we should compose @@ -327,8 +328,8 @@ fh_compose(struct svc_fh *fhp, struct svc_export *exp, struct dentry *dentry, st * */ - u8 ref_fh_version = 0; - u8 ref_fh_fsid_type = 0; + u8 version = 1; + u8 fsid_type = 0; struct inode * inode = dentry->d_inode; struct dentry *parent = dentry->d_parent; __u32 *datap; @@ -340,57 +341,52 @@ fh_compose(struct svc_fh *fhp, struct svc_export *exp, struct dentry *dentry, st parent->d_name.name, dentry->d_name.name, (inode ? inode->i_ino : 0)); + /* Choose filehandle version and fsid type based on + * the reference filehandle (if it is in the same export) + * or the export options. + */ if (ref_fh && ref_fh->fh_export == exp) { - ref_fh_version = ref_fh->fh_handle.fh_version; - if (ref_fh_version == 0xca) - ref_fh_fsid_type = 0; + version = ref_fh->fh_handle.fh_version; + if (version == 0xca) + fsid_type = 0; else - ref_fh_fsid_type = ref_fh->fh_handle.fh_fsid_type; - if (ref_fh_fsid_type > 3) - ref_fh_fsid_type = 0; - - /* make sure ref_fh type works for given export */ - if (ref_fh_fsid_type == 1 && - !(exp->ex_flags & NFSEXP_FSID)) { - /* if we don't have an fsid, we cannot provide one... */ - ref_fh_fsid_type = 0; - } + fsid_type = ref_fh->fh_handle.fh_fsid_type; + /* We know this version/type works for this export + * so there is no need for further checks. + */ } else if (exp->ex_flags & NFSEXP_FSID) - ref_fh_fsid_type = 1; - - if (!old_valid_dev(ex_dev) && ref_fh_fsid_type == 0) { + fsid_type = 1; + else if (!old_valid_dev(ex_dev)) /* for newer device numbers, we must use a newer fsid format */ - ref_fh_version = 1; - ref_fh_fsid_type = 3; - } - if (old_valid_dev(ex_dev) && - (ref_fh_fsid_type == 2 || ref_fh_fsid_type == 3)) - /* must use type1 for smaller device numbers */ - ref_fh_fsid_type = 0; + fsid_type = 3; + else + fsid_type = 0; if (ref_fh == fhp) fh_put(ref_fh); if (fhp->fh_locked || fhp->fh_dentry) { printk(KERN_ERR "fh_compose: fh %s/%s not initialized!\n", - parent->d_name.name, dentry->d_name.name); + parent->d_name.name, dentry->d_name.name); } if (fhp->fh_maxsize < NFS_FHSIZE) printk(KERN_ERR "fh_compose: called with maxsize %d! %s/%s\n", - fhp->fh_maxsize, parent->d_name.name, dentry->d_name.name); + fhp->fh_maxsize, + parent->d_name.name, dentry->d_name.name); fhp->fh_dentry = dget(dentry); /* our internal copy */ fhp->fh_export = exp; cache_get(&exp->h); - if (ref_fh_version == 0xca) { + if (version == 0xca) { /* old style filehandle please */ memset(&fhp->fh_handle.fh_base, 0, NFS_FHSIZE); fhp->fh_handle.fh_size = NFS_FHSIZE; fhp->fh_handle.ofh_dcookie = 0xfeebbaca; fhp->fh_handle.ofh_dev = old_encode_dev(ex_dev); fhp->fh_handle.ofh_xdev = fhp->fh_handle.ofh_dev; - fhp->fh_handle.ofh_xino = ino_t_to_u32(exp->ex_dentry->d_inode->i_ino); + fhp->fh_handle.ofh_xino = + ino_t_to_u32(exp->ex_dentry->d_inode->i_ino); fhp->fh_handle.ofh_dirino = ino_t_to_u32(parent_ino(dentry)); if (inode) _fh_update_old(dentry, exp, &fhp->fh_handle); @@ -399,38 +395,38 @@ fh_compose(struct svc_fh *fhp, struct svc_export *exp, struct dentry *dentry, st fhp->fh_handle.fh_version = 1; fhp->fh_handle.fh_auth_type = 0; datap = fhp->fh_handle.fh_auth+0; - fhp->fh_handle.fh_fsid_type = ref_fh_fsid_type; - switch (ref_fh_fsid_type) { - case 0: - /* - * fsid_type 0: - * 2byte major, 2byte minor, 4byte inode - */ - mk_fsid_v0(datap, ex_dev, - exp->ex_dentry->d_inode->i_ino); - break; - case 1: - /* fsid_type 1 == 4 bytes filesystem id */ - mk_fsid_v1(datap, exp->ex_fsid); - break; - case 2: - /* - * fsid_type 2: - * 4byte major, 4byte minor, 4byte inode - */ - mk_fsid_v2(datap, ex_dev, - exp->ex_dentry->d_inode->i_ino); - break; - case 3: - /* - * fsid_type 3: - * 4byte devicenumber, 4byte inode - */ - mk_fsid_v3(datap, ex_dev, - exp->ex_dentry->d_inode->i_ino); - break; + fhp->fh_handle.fh_fsid_type = fsid_type; + switch (fsid_type) { + case 0: + /* + * fsid_type 0: + * 2byte major, 2byte minor, 4byte inode + */ + mk_fsid_v0(datap, ex_dev, + exp->ex_dentry->d_inode->i_ino); + break; + case 1: + /* fsid_type 1 == 4 bytes filesystem id */ + mk_fsid_v1(datap, exp->ex_fsid); + break; + case 2: + /* + * fsid_type 2: + * 4byte major, 4byte minor, 4byte inode + */ + mk_fsid_v2(datap, ex_dev, + exp->ex_dentry->d_inode->i_ino); + break; + case 3: + /* + * fsid_type 3: + * 4byte devicenumber, 4byte inode + */ + mk_fsid_v3(datap, ex_dev, + exp->ex_dentry->d_inode->i_ino); + break; } - len = key_len(ref_fh_fsid_type); + len = key_len(fsid_type); datap += len/4; fhp->fh_handle.fh_size = 4 + len; @@ -457,7 +453,7 @@ fh_update(struct svc_fh *fhp) { struct dentry *dentry; __u32 *datap; - + if (!fhp->fh_dentry) goto out_bad; -- cgit v0.10.2 From af6a4e280e3ff453653f39190b57b345ff0bec16 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 14 Feb 2007 00:33:12 -0800 Subject: [PATCH] knfsd: add some new fsid types Add support for using a filesystem UUID to identify and export point in the filehandle. For NFSv2, this UUID is xor-ed down to 4 or 8 bytes so that it doesn't take up too much room. For NFSv3+, we use the full 16 bytes, and possibly also a 64bit inode number for exports beneath the root of a filesystem. When generating an fsid to return in 'stat' information, use the UUID (hashed down to size) if it is available and a small 'fsid' was not specifically provided. Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/nfsd/export.c b/fs/nfsd/export.c index 49c310b..bb3c314 100644 --- a/fs/nfsd/export.c +++ b/fs/nfsd/export.c @@ -190,18 +190,17 @@ static int expkey_show(struct seq_file *m, struct cache_head *h) { struct svc_expkey *ek ; + int i; if (h ==NULL) { seq_puts(m, "#domain fsidtype fsid [path]\n"); return 0; } ek = container_of(h, struct svc_expkey, h); - seq_printf(m, "%s %d 0x%08x", ek->ek_client->name, - ek->ek_fsidtype, ek->ek_fsid[0]); - if (ek->ek_fsidtype != 1) - seq_printf(m, "%08x", ek->ek_fsid[1]); - if (ek->ek_fsidtype == 2) - seq_printf(m, "%08x", ek->ek_fsid[2]); + seq_printf(m, "%s %d 0x", ek->ek_client->name, + ek->ek_fsidtype); + for (i=0; i < key_len(ek->ek_fsidtype)/4; i++) + seq_printf(m, "%08x", ek->ek_fsid[i]); if (test_bit(CACHE_VALID, &h->flags) && !test_bit(CACHE_NEGATIVE, &h->flags)) { seq_printf(m, " "); @@ -232,9 +231,8 @@ static inline void expkey_init(struct cache_head *cnew, kref_get(&item->ek_client->ref); new->ek_client = item->ek_client; new->ek_fsidtype = item->ek_fsidtype; - new->ek_fsid[0] = item->ek_fsid[0]; - new->ek_fsid[1] = item->ek_fsid[1]; - new->ek_fsid[2] = item->ek_fsid[2]; + + memcpy(new->ek_fsid, item->ek_fsid, sizeof(new->ek_fsid)); } static inline void expkey_update(struct cache_head *cnew, @@ -363,7 +361,7 @@ static struct svc_export *svc_export_update(struct svc_export *new, struct svc_export *old); static struct svc_export *svc_export_lookup(struct svc_export *); -static int check_export(struct inode *inode, int flags) +static int check_export(struct inode *inode, int flags, unsigned char *uuid) { /* We currently export only dirs and regular files. @@ -376,12 +374,13 @@ static int check_export(struct inode *inode, int flags) /* There are two requirements on a filesystem to be exportable. * 1: We must be able to identify the filesystem from a number. * either a device number (so FS_REQUIRES_DEV needed) - * or an FSID number (so NFSEXP_FSID needed). + * or an FSID number (so NFSEXP_FSID or ->uuid is needed). * 2: We must be able to find an inode from a filehandle. * This means that s_export_op must be set. */ if (!(inode->i_sb->s_type->fs_flags & FS_REQUIRES_DEV) && - !(flags & NFSEXP_FSID)) { + !(flags & NFSEXP_FSID) && + uuid == NULL) { dprintk("exp_export: export of non-dev fs without fsid\n"); return -EINVAL; } @@ -406,10 +405,6 @@ fsloc_parse(char **mesg, char *buf, struct nfsd4_fs_locations *fsloc) int len; int migrated, i, err; - len = qword_get(mesg, buf, PAGE_SIZE); - if (len != 5 || memcmp(buf, "fsloc", 5)) - return 0; - /* listsize */ err = get_int(mesg, &fsloc->locations_count); if (err) @@ -520,6 +515,8 @@ static int svc_export_parse(struct cache_detail *cd, char *mesg, int mlen) exp.ex_fslocs.locations_count = 0; exp.ex_fslocs.migrated = 0; + exp.ex_uuid = NULL; + /* flags */ err = get_int(&mesg, &an_int); if (err == -ENOENT) @@ -543,12 +540,33 @@ static int svc_export_parse(struct cache_detail *cd, char *mesg, int mlen) if (err) goto out; exp.ex_fsid = an_int; - err = check_export(nd.dentry->d_inode, exp.ex_flags); - if (err) goto out; + while ((len = qword_get(&mesg, buf, PAGE_SIZE)) > 0) { + if (strcmp(buf, "fsloc") == 0) + err = fsloc_parse(&mesg, buf, &exp.ex_fslocs); + else if (strcmp(buf, "uuid") == 0) { + /* expect a 16 byte uuid encoded as \xXXXX... */ + len = qword_get(&mesg, buf, PAGE_SIZE); + if (len != 16) + err = -EINVAL; + else { + exp.ex_uuid = + kmemdup(buf, 16, GFP_KERNEL); + if (exp.ex_uuid == NULL) + err = -ENOMEM; + } + } else + /* quietly ignore unknown words and anything + * following. Newer user-space can try to set + * new values, then see what the result was. + */ + break; + if (err) + goto out; + } - err = fsloc_parse(&mesg, buf, &exp.ex_fslocs); - if (err) - goto out; + err = check_export(nd.dentry->d_inode, exp.ex_flags, + exp.ex_uuid); + if (err) goto out; } expp = svc_export_lookup(&exp); @@ -562,6 +580,8 @@ static int svc_export_parse(struct cache_detail *cd, char *mesg, int mlen) else exp_put(expp); out: + nfsd4_fslocs_free(&exp.ex_fslocs); + kfree(exp.ex_uuid); kfree(exp.ex_path); if (nd.dentry) path_release(&nd); @@ -591,9 +611,19 @@ static int svc_export_show(struct seq_file *m, seq_escape(m, exp->ex_client->name, " \t\n\\"); seq_putc(m, '('); if (test_bit(CACHE_VALID, &h->flags) && - !test_bit(CACHE_NEGATIVE, &h->flags)) + !test_bit(CACHE_NEGATIVE, &h->flags)) { exp_flags(m, exp->ex_flags, exp->ex_fsid, exp->ex_anon_uid, exp->ex_anon_gid, &exp->ex_fslocs); + if (exp->ex_uuid) { + int i; + seq_puts(m, ",uuid="); + for (i=0; i<16; i++) { + if ((i&3) == 0 && i) + seq_putc(m, ':'); + seq_printf(m, "%02x", exp->ex_uuid[i]); + } + } + } seq_puts(m, ")\n"); return 0; } @@ -630,6 +660,8 @@ static void export_update(struct cache_head *cnew, struct cache_head *citem) new->ex_anon_uid = item->ex_anon_uid; new->ex_anon_gid = item->ex_anon_gid; new->ex_fsid = item->ex_fsid; + new->ex_uuid = item->ex_uuid; + item->ex_uuid = NULL; new->ex_path = item->ex_path; item->ex_path = NULL; new->ex_fslocs.locations = item->ex_fslocs.locations; @@ -752,11 +784,11 @@ exp_get_key(svc_client *clp, dev_t dev, ino_t ino) u32 fsidv[3]; if (old_valid_dev(dev)) { - mk_fsid_v0(fsidv, dev, ino); - return exp_find_key(clp, 0, fsidv, NULL); + mk_fsid(FSID_DEV, fsidv, dev, ino, 0, NULL); + return exp_find_key(clp, FSID_DEV, fsidv, NULL); } - mk_fsid_v3(fsidv, dev, ino); - return exp_find_key(clp, 3, fsidv, NULL); + mk_fsid(FSID_ENCODE_DEV, fsidv, dev, ino, 0, NULL); + return exp_find_key(clp, FSID_ENCODE_DEV, fsidv, NULL); } /* @@ -767,9 +799,9 @@ exp_get_fsid_key(svc_client *clp, int fsid) { u32 fsidv[2]; - mk_fsid_v1(fsidv, fsid); + mk_fsid(FSID_NUM, fsidv, 0, 0, fsid, NULL); - return exp_find_key(clp, 1, fsidv, NULL); + return exp_find_key(clp, FSID_NUM, fsidv, NULL); } svc_export * @@ -883,8 +915,8 @@ static int exp_fsid_hash(svc_client *clp, struct svc_export *exp) if ((exp->ex_flags & NFSEXP_FSID) == 0) return 0; - mk_fsid_v1(fsid, exp->ex_fsid); - return exp_set_key(clp, 1, fsid, exp); + mk_fsid(FSID_NUM, fsid, 0, 0, exp->ex_fsid, NULL); + return exp_set_key(clp, FSID_NUM, fsid, exp); } static int exp_hash(struct auth_domain *clp, struct svc_export *exp) @@ -894,11 +926,11 @@ static int exp_hash(struct auth_domain *clp, struct svc_export *exp) dev_t dev = inode->i_sb->s_dev; if (old_valid_dev(dev)) { - mk_fsid_v0(fsid, dev, inode->i_ino); - return exp_set_key(clp, 0, fsid, exp); + mk_fsid(FSID_DEV, fsid, dev, inode->i_ino, 0, NULL); + return exp_set_key(clp, FSID_DEV, fsid, exp); } - mk_fsid_v3(fsid, dev, inode->i_ino); - return exp_set_key(clp, 3, fsid, exp); + mk_fsid(FSID_ENCODE_DEV, fsid, dev, inode->i_ino, 0, NULL); + return exp_set_key(clp, FSID_ENCODE_DEV, fsid, exp); } static void exp_unhash(struct svc_export *exp) @@ -977,7 +1009,7 @@ exp_export(struct nfsctl_export *nxp) goto finish; } - err = check_export(nd.dentry->d_inode, nxp->ex_flags); + err = check_export(nd.dentry->d_inode, nxp->ex_flags, NULL); if (err) goto finish; err = -ENOMEM; @@ -1170,9 +1202,9 @@ exp_pseudoroot(struct auth_domain *clp, struct svc_fh *fhp, __be32 rv; u32 fsidv[2]; - mk_fsid_v1(fsidv, 0); + mk_fsid(FSID_NUM, fsidv, 0, 0, 0, NULL); - exp = exp_find(clp, 1, fsidv, creq); + exp = exp_find(clp, FSID_NUM, fsidv, creq); if (IS_ERR(exp)) return nfserrno(PTR_ERR(exp)); if (exp == NULL) diff --git a/fs/nfsd/nfs3xdr.c b/fs/nfsd/nfs3xdr.c index e695660..6f67798 100644 --- a/fs/nfsd/nfs3xdr.c +++ b/fs/nfsd/nfs3xdr.c @@ -149,6 +149,27 @@ decode_sattr3(__be32 *p, struct iattr *iap) return p; } +static __be32 *encode_fsid(__be32 *p, struct svc_fh *fhp) +{ + u64 f; + switch(fsid_source(fhp)) { + default: + case FSIDSOURCE_DEV: + p = xdr_encode_hyper(p, (u64)huge_encode_dev + (fhp->fh_dentry->d_inode->i_sb->s_dev)); + break; + case FSIDSOURCE_FSID: + p = xdr_encode_hyper(p, (u64) fhp->fh_export->ex_fsid); + break; + case FSIDSOURCE_UUID: + f = ((u64*)fhp->fh_export->ex_uuid)[0]; + f ^= ((u64*)fhp->fh_export->ex_uuid)[1]; + p = xdr_encode_hyper(p, f); + break; + } + return p; +} + static __be32 * encode_fattr3(struct svc_rqst *rqstp, __be32 *p, struct svc_fh *fhp, struct kstat *stat) @@ -169,10 +190,7 @@ encode_fattr3(struct svc_rqst *rqstp, __be32 *p, struct svc_fh *fhp, p = xdr_encode_hyper(p, ((u64)stat->blocks) << 9); *p++ = htonl((u32) MAJOR(stat->rdev)); *p++ = htonl((u32) MINOR(stat->rdev)); - if (is_fsid(fhp, rqstp->rq_reffh)) - p = xdr_encode_hyper(p, (u64) fhp->fh_export->ex_fsid); - else - p = xdr_encode_hyper(p, (u64) huge_encode_dev(stat->dev)); + p = encode_fsid(p, fhp); p = xdr_encode_hyper(p, (u64) stat->ino); p = encode_time3(p, &stat->atime); lease_get_mtime(dentry->d_inode, &time); @@ -203,10 +221,7 @@ encode_saved_post_attr(struct svc_rqst *rqstp, __be32 *p, struct svc_fh *fhp) p = xdr_encode_hyper(p, ((u64)fhp->fh_post_blocks) << 9); *p++ = fhp->fh_post_rdev[0]; *p++ = fhp->fh_post_rdev[1]; - if (is_fsid(fhp, rqstp->rq_reffh)) - p = xdr_encode_hyper(p, (u64) fhp->fh_export->ex_fsid); - else - p = xdr_encode_hyper(p, (u64)huge_encode_dev(inode->i_sb->s_dev)); + p = encode_fsid(p, fhp); p = xdr_encode_hyper(p, (u64) inode->i_ino); p = encode_time3(p, &fhp->fh_post_atime); p = encode_time3(p, &fhp->fh_post_mtime); diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c index 18aa944..0efba55 100644 --- a/fs/nfsd/nfs4xdr.c +++ b/fs/nfsd/nfs4xdr.c @@ -1563,14 +1563,20 @@ nfsd4_encode_fattr(struct svc_fh *fhp, struct svc_export *exp, if (exp->ex_fslocs.migrated) { WRITE64(NFS4_REFERRAL_FSID_MAJOR); WRITE64(NFS4_REFERRAL_FSID_MINOR); - } else if (is_fsid(fhp, rqstp->rq_reffh)) { + } else switch(fsid_source(fhp)) { + case FSIDSOURCE_FSID: WRITE64((u64)exp->ex_fsid); WRITE64((u64)0); - } else { + break; + case FSIDSOURCE_DEV: WRITE32(0); WRITE32(MAJOR(stat.dev)); WRITE32(0); WRITE32(MINOR(stat.dev)); + break; + case FSIDSOURCE_UUID: + WRITEMEM(exp->ex_uuid, 16); + break; } } if (bmval0 & FATTR4_WORD0_UNIQUE_HANDLES) { diff --git a/fs/nfsd/nfsfh.c b/fs/nfsd/nfsfh.c index 12c5e74..286bc4d 100644 --- a/fs/nfsd/nfsfh.c +++ b/fs/nfsd/nfsfh.c @@ -119,9 +119,6 @@ fh_verify(struct svc_rqst *rqstp, struct svc_fh *fhp, int type, int access) dprintk("nfsd: fh_verify(%s)\n", SVCFH_fmt(fhp)); - /* keep this filehandle for possible reference when encoding attributes */ - rqstp->rq_reffh = fh; - if (!fhp->fh_dentry) { __u32 *datap=NULL; __u32 tfh[3]; /* filehandle fragment for oldstyle filehandles */ @@ -146,10 +143,10 @@ fh_verify(struct svc_rqst *rqstp, struct svc_fh *fhp, int type, int access) } len = key_len(fh->fh_fsid_type) / 4; if (len == 0) goto out; - if (fh->fh_fsid_type == 2) { + if (fh->fh_fsid_type == FSID_MAJOR_MINOR) { /* deprecated, convert to type 3 */ - len = 3; - fh->fh_fsid_type = 3; + len = key_len(FSID_ENCODE_DEV)/4; + fh->fh_fsid_type = FSID_ENCODE_DEV; fh->fh_fsid[0] = new_encode_dev(MKDEV(ntohl(fh->fh_fsid[0]), ntohl(fh->fh_fsid[1]))); fh->fh_fsid[1] = fh->fh_fsid[2]; } @@ -164,8 +161,9 @@ fh_verify(struct svc_rqst *rqstp, struct svc_fh *fhp, int type, int access) /* assume old filehandle format */ xdev = old_decode_dev(fh->ofh_xdev); xino = u32_to_ino_t(fh->ofh_xino); - mk_fsid_v0(tfh, xdev, xino); - exp = exp_find(rqstp->rq_client, 0, tfh, &rqstp->rq_chandle); + mk_fsid(FSID_DEV, tfh, xdev, xino, 0, NULL); + exp = exp_find(rqstp->rq_client, FSID_DEV, tfh, + &rqstp->rq_chandle); } if (IS_ERR(exp) && (PTR_ERR(exp) == -EAGAIN @@ -334,6 +332,7 @@ fh_compose(struct svc_fh *fhp, struct svc_export *exp, struct dentry *dentry, struct dentry *parent = dentry->d_parent; __u32 *datap; dev_t ex_dev = exp->ex_dentry->d_inode->i_sb->s_dev; + int root_export = (exp->ex_dentry == exp->ex_dentry->d_sb->s_root); dprintk("nfsd: fh_compose(exp %02x:%02x/%ld %s/%s, ino=%ld)\n", MAJOR(ex_dev), MINOR(ex_dev), @@ -348,19 +347,31 @@ fh_compose(struct svc_fh *fhp, struct svc_export *exp, struct dentry *dentry, if (ref_fh && ref_fh->fh_export == exp) { version = ref_fh->fh_handle.fh_version; if (version == 0xca) - fsid_type = 0; + fsid_type = FSID_DEV; else fsid_type = ref_fh->fh_handle.fh_fsid_type; /* We know this version/type works for this export * so there is no need for further checks. */ + } else if (exp->ex_uuid) { + if (fhp->fh_maxsize >= 64) { + if (root_export) + fsid_type = FSID_UUID16; + else + fsid_type = FSID_UUID16_INUM; + } else { + if (root_export) + fsid_type = FSID_UUID8; + else + fsid_type = FSID_UUID4_INUM; + } } else if (exp->ex_flags & NFSEXP_FSID) - fsid_type = 1; + fsid_type = FSID_NUM; else if (!old_valid_dev(ex_dev)) /* for newer device numbers, we must use a newer fsid format */ - fsid_type = 3; + fsid_type = FSID_ENCODE_DEV; else - fsid_type = 0; + fsid_type = FSID_DEV; if (ref_fh == fhp) fh_put(ref_fh); @@ -396,36 +407,10 @@ fh_compose(struct svc_fh *fhp, struct svc_export *exp, struct dentry *dentry, fhp->fh_handle.fh_auth_type = 0; datap = fhp->fh_handle.fh_auth+0; fhp->fh_handle.fh_fsid_type = fsid_type; - switch (fsid_type) { - case 0: - /* - * fsid_type 0: - * 2byte major, 2byte minor, 4byte inode - */ - mk_fsid_v0(datap, ex_dev, - exp->ex_dentry->d_inode->i_ino); - break; - case 1: - /* fsid_type 1 == 4 bytes filesystem id */ - mk_fsid_v1(datap, exp->ex_fsid); - break; - case 2: - /* - * fsid_type 2: - * 4byte major, 4byte minor, 4byte inode - */ - mk_fsid_v2(datap, ex_dev, - exp->ex_dentry->d_inode->i_ino); - break; - case 3: - /* - * fsid_type 3: - * 4byte devicenumber, 4byte inode - */ - mk_fsid_v3(datap, ex_dev, - exp->ex_dentry->d_inode->i_ino); - break; - } + mk_fsid(fsid_type, datap, ex_dev, + exp->ex_dentry->d_inode->i_ino, + exp->ex_fsid, exp->ex_uuid); + len = key_len(fsid_type); datap += len/4; fhp->fh_handle.fh_size = 4 + len; @@ -530,3 +515,22 @@ char * SVCFH_fmt(struct svc_fh *fhp) fh->fh_base.fh_pad[5]); return buf; } + +enum fsid_source fsid_source(struct svc_fh *fhp) +{ + if (fhp->fh_handle.fh_version != 1) + return FSIDSOURCE_DEV; + switch(fhp->fh_handle.fh_fsid_type) { + case FSID_DEV: + case FSID_ENCODE_DEV: + case FSID_MAJOR_MINOR: + return FSIDSOURCE_DEV; + case FSID_NUM: + return FSIDSOURCE_FSID; + default: + if (fhp->fh_export->ex_flags & NFSEXP_FSID) + return FSIDSOURCE_FSID; + else + return FSIDSOURCE_UUID; + } +} diff --git a/fs/nfsd/nfsxdr.c b/fs/nfsd/nfsxdr.c index 6555c50..0c24b9e 100644 --- a/fs/nfsd/nfsxdr.c +++ b/fs/nfsd/nfsxdr.c @@ -153,6 +153,7 @@ encode_fattr(struct svc_rqst *rqstp, __be32 *p, struct svc_fh *fhp, struct dentry *dentry = fhp->fh_dentry; int type; struct timespec time; + u32 f; type = (stat->mode & S_IFMT); @@ -173,10 +174,22 @@ encode_fattr(struct svc_rqst *rqstp, __be32 *p, struct svc_fh *fhp, else *p++ = htonl(0xffffffff); *p++ = htonl((u32) stat->blocks); - if (is_fsid(fhp, rqstp->rq_reffh)) - *p++ = htonl((u32) fhp->fh_export->ex_fsid); - else + switch (fsid_source(fhp)) { + default: + case FSIDSOURCE_DEV: *p++ = htonl(new_encode_dev(stat->dev)); + break; + case FSIDSOURCE_FSID: + *p++ = htonl((u32) fhp->fh_export->ex_fsid); + break; + case FSIDSOURCE_UUID: + f = ((u32*)fhp->fh_export->ex_uuid)[0]; + f ^= ((u32*)fhp->fh_export->ex_uuid)[1]; + f ^= ((u32*)fhp->fh_export->ex_uuid)[2]; + f ^= ((u32*)fhp->fh_export->ex_uuid)[3]; + *p++ = htonl(f); + break; + } *p++ = htonl((u32) stat->ino); *p++ = htonl((u32) stat->atime.tv_sec); *p++ = htonl(stat->atime.tv_nsec ? stat->atime.tv_nsec / 1000 : 0); diff --git a/include/linux/nfsd/export.h b/include/linux/nfsd/export.h index 045e38c..9f62d61 100644 --- a/include/linux/nfsd/export.h +++ b/include/linux/nfsd/export.h @@ -74,19 +74,20 @@ struct svc_export { uid_t ex_anon_uid; gid_t ex_anon_gid; int ex_fsid; + unsigned char * ex_uuid; /* 16 byte fsid */ struct nfsd4_fs_locations ex_fslocs; }; /* an "export key" (expkey) maps a filehandlefragement to an - * svc_export for a given client. There can be two per export, one - * for type 0 (dev/ino), one for type 1 (fsid) + * svc_export for a given client. There can be several per export, + * for the different fsid types. */ struct svc_expkey { struct cache_head h; struct auth_domain * ek_client; int ek_fsidtype; - u32 ek_fsid[3]; + u32 ek_fsid[6]; struct vfsmount * ek_mnt; struct dentry * ek_dentry; diff --git a/include/linux/nfsd/nfsd.h b/include/linux/nfsd/nfsd.h index 4b7c4b5..72feac5 100644 --- a/include/linux/nfsd/nfsd.h +++ b/include/linux/nfsd/nfsd.h @@ -254,18 +254,6 @@ void nfsd_lockd_shutdown(void); */ extern struct timeval nfssvc_boot; -static inline int is_fsid(struct svc_fh *fh, struct knfsd_fh *reffh) -{ - if (fh->fh_export->ex_flags & NFSEXP_FSID) { - struct vfsmount *mnt = fh->fh_export->ex_mnt; - if (!old_valid_dev(mnt->mnt_sb->s_dev) || - (reffh->fh_version == 1 && reffh->fh_fsid_type == 1)) - return 1; - } - return 0; -} - - #ifdef CONFIG_NFSD_V4 /* before processing a COMPOUND operation, we have to check that there diff --git a/include/linux/nfsd/nfsfh.h b/include/linux/nfsd/nfsfh.h index d9c6c38..11e568e 100644 --- a/include/linux/nfsd/nfsfh.h +++ b/include/linux/nfsd/nfsfh.h @@ -165,38 +165,91 @@ typedef struct svc_fh { } svc_fh; -static inline void mk_fsid_v0(u32 *fsidv, dev_t dev, ino_t ino) -{ - fsidv[0] = htonl((MAJOR(dev)<<16) | - MINOR(dev)); - fsidv[1] = ino_t_to_u32(ino); -} +enum nfsd_fsid { + FSID_DEV = 0, + FSID_NUM, + FSID_MAJOR_MINOR, + FSID_ENCODE_DEV, + FSID_UUID4_INUM, + FSID_UUID8, + FSID_UUID16, + FSID_UUID16_INUM, +}; -static inline void mk_fsid_v1(u32 *fsidv, u32 fsid) -{ - fsidv[0] = fsid; -} +enum fsid_source { + FSIDSOURCE_DEV, + FSIDSOURCE_FSID, + FSIDSOURCE_UUID, +}; +extern enum fsid_source fsid_source(struct svc_fh *fhp); -static inline void mk_fsid_v2(u32 *fsidv, dev_t dev, ino_t ino) -{ - fsidv[0] = htonl(MAJOR(dev)); - fsidv[1] = htonl(MINOR(dev)); - fsidv[2] = ino_t_to_u32(ino); -} -static inline void mk_fsid_v3(u32 *fsidv, dev_t dev, ino_t ino) +/* This might look a little large to "inline" but in all calls except + * one, 'vers' is constant so moste of the function disappears. + */ +static inline void mk_fsid(int vers, u32 *fsidv, dev_t dev, ino_t ino, + u32 fsid, unsigned char *uuid) { - fsidv[0] = new_encode_dev(dev); - fsidv[1] = ino_t_to_u32(ino); + u32 *up; + switch(vers) { + case FSID_DEV: + fsidv[0] = htonl((MAJOR(dev)<<16) | + MINOR(dev)); + fsidv[1] = ino_t_to_u32(ino); + break; + case FSID_NUM: + fsidv[0] = fsid; + break; + case FSID_MAJOR_MINOR: + fsidv[0] = htonl(MAJOR(dev)); + fsidv[1] = htonl(MINOR(dev)); + fsidv[2] = ino_t_to_u32(ino); + break; + + case FSID_ENCODE_DEV: + fsidv[0] = new_encode_dev(dev); + fsidv[1] = ino_t_to_u32(ino); + break; + + case FSID_UUID4_INUM: + /* 4 byte fsid and inode number */ + up = (u32*)uuid; + fsidv[0] = ino_t_to_u32(ino); + fsidv[1] = up[0] ^ up[1] ^ up[2] ^ up[3]; + break; + + case FSID_UUID8: + /* 8 byte fsid */ + up = (u32*)uuid; + fsidv[0] = up[0] ^ up[2]; + fsidv[1] = up[1] ^ up[3]; + break; + + case FSID_UUID16: + /* 16 byte fsid - NFSv3+ only */ + memcpy(fsidv, uuid, 16); + break; + + case FSID_UUID16_INUM: + /* 8 byte inode and 16 byte fsid */ + *(u64*)fsidv = (u64)ino; + memcpy(fsidv+2, uuid, 16); + break; + default: BUG(); + } } static inline int key_len(int type) { switch(type) { - case 0: return 8; - case 1: return 4; - case 2: return 12; - case 3: return 8; + case FSID_DEV: return 8; + case FSID_NUM: return 4; + case FSID_MAJOR_MINOR: return 12; + case FSID_ENCODE_DEV: return 8; + case FSID_UUID4_INUM: return 8; + case FSID_UUID8: return 8; + case FSID_UUID16: return 16; + case FSID_UUID16_INUM: return 24; default: return 0; } } -- cgit v0.10.2 From 3fc605a2aa38899c12180ca311f1eeb61a6d867e Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 14 Feb 2007 00:33:13 -0800 Subject: [PATCH] knfsd: allow the server to provide a gid list when using AUTH_UNIX authentication AUTH_UNIX authentication (the standard with NFS) has a limit of 16 groups ids. This causes problems for people in more than 16 groups. So allow the server to map a uid into a list of group ids based on local knowledge rather depending on the (possibly truncated) list from the client. If there is no process on the server responding to upcalls, the gidlist in the request will still be used. Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/net/sunrpc/sunrpc_syms.c b/net/sunrpc/sunrpc_syms.c index d85fdde..d386526 100644 --- a/net/sunrpc/sunrpc_syms.c +++ b/net/sunrpc/sunrpc_syms.c @@ -137,7 +137,7 @@ EXPORT_SYMBOL(nlm_debug); extern int register_rpc_pipefs(void); extern void unregister_rpc_pipefs(void); -extern struct cache_detail ip_map_cache; +extern struct cache_detail ip_map_cache, unix_gid_cache; extern int init_socket_xprt(void); extern void cleanup_socket_xprt(void); @@ -157,6 +157,7 @@ init_sunrpc(void) rpc_proc_init(); #endif cache_register(&ip_map_cache); + cache_register(&unix_gid_cache); init_socket_xprt(); out: return err; @@ -170,6 +171,8 @@ cleanup_sunrpc(void) rpc_destroy_mempool(); if (cache_unregister(&ip_map_cache)) printk(KERN_ERR "sunrpc: failed to unregister ip_map cache\n"); + if (cache_unregister(&unix_gid_cache)) + printk(KERN_ERR "sunrpc: failed to unregister unix_gid cache\n"); #ifdef RPC_DEBUG rpc_unregister_sysctl(); #endif diff --git a/net/sunrpc/svcauth_unix.c b/net/sunrpc/svcauth_unix.c index 4b775db..9bae409 100644 --- a/net/sunrpc/svcauth_unix.c +++ b/net/sunrpc/svcauth_unix.c @@ -418,6 +418,214 @@ svcauth_unix_info_release(void *info) cache_put(&ipm->h, &ip_map_cache); } +/**************************************************************************** + * auth.unix.gid cache + * simple cache to map a UID to a list of GIDs + * because AUTH_UNIX aka AUTH_SYS has a max of 16 + */ +#define GID_HASHBITS 8 +#define GID_HASHMAX (1<flags) && + !test_bit(CACHE_NEGATIVE, &item->flags)) + put_group_info(ug->gi); + kfree(ug); +} + +static int unix_gid_match(struct cache_head *corig, struct cache_head *cnew) +{ + struct unix_gid *orig = container_of(corig, struct unix_gid, h); + struct unix_gid *new = container_of(cnew, struct unix_gid, h); + return orig->uid == new->uid; +} +static void unix_gid_init(struct cache_head *cnew, struct cache_head *citem) +{ + struct unix_gid *new = container_of(cnew, struct unix_gid, h); + struct unix_gid *item = container_of(citem, struct unix_gid, h); + new->uid = item->uid; +} +static void unix_gid_update(struct cache_head *cnew, struct cache_head *citem) +{ + struct unix_gid *new = container_of(cnew, struct unix_gid, h); + struct unix_gid *item = container_of(citem, struct unix_gid, h); + + get_group_info(item->gi); + new->gi = item->gi; +} +static struct cache_head *unix_gid_alloc(void) +{ + struct unix_gid *g = kmalloc(sizeof(*g), GFP_KERNEL); + if (g) + return &g->h; + else + return NULL; +} + +static void unix_gid_request(struct cache_detail *cd, + struct cache_head *h, + char **bpp, int *blen) +{ + char tuid[20]; + struct unix_gid *ug = container_of(h, struct unix_gid, h); + + snprintf(tuid, 20, "%u", ug->uid); + qword_add(bpp, blen, tuid); + (*bpp)[-1] = '\n'; +} + +static struct unix_gid *unix_gid_lookup(uid_t uid); +extern struct cache_detail unix_gid_cache; + +static int unix_gid_parse(struct cache_detail *cd, + char *mesg, int mlen) +{ + /* uid expiry Ngid gid0 gid1 ... gidN-1 */ + int uid; + int gids; + int rv; + int i; + int err; + time_t expiry; + struct unix_gid ug, *ugp; + + if (mlen <= 0 || mesg[mlen-1] != '\n') + return -EINVAL; + mesg[mlen-1] = 0; + + rv = get_int(&mesg, &uid); + if (rv) + return -EINVAL; + ug.uid = uid; + + expiry = get_expiry(&mesg); + if (expiry == 0) + return -EINVAL; + + rv = get_int(&mesg, &gids); + if (rv || gids < 0 || gids > 8192) + return -EINVAL; + + ug.gi = groups_alloc(gids); + if (!ug.gi) + return -ENOMEM; + + for (i = 0 ; i < gids ; i++) { + int gid; + rv = get_int(&mesg, &gid); + err = -EINVAL; + if (rv) + goto out; + GROUP_AT(ug.gi, i) = gid; + } + + ugp = unix_gid_lookup(uid); + if (ugp) { + struct cache_head *ch; + ug.h.flags = 0; + ug.h.expiry_time = expiry; + ch = sunrpc_cache_update(&unix_gid_cache, + &ug.h, &ugp->h, + hash_long(uid, GID_HASHBITS)); + if (!ch) + err = -ENOMEM; + else { + err = 0; + cache_put(ch, &unix_gid_cache); + } + } else + err = -ENOMEM; + out: + if (ug.gi) + put_group_info(ug.gi); + return err; +} + +static int unix_gid_show(struct seq_file *m, + struct cache_detail *cd, + struct cache_head *h) +{ + struct unix_gid *ug; + int i; + int glen; + + if (h == NULL) { + seq_puts(m, "#uid cnt: gids...\n"); + return 0; + } + ug = container_of(h, struct unix_gid, h); + if (test_bit(CACHE_VALID, &h->flags) && + !test_bit(CACHE_NEGATIVE, &h->flags)) + glen = ug->gi->ngroups; + else + glen = 0; + + seq_printf(m, "%d %d:", ug->uid, glen); + for (i = 0; i < glen; i++) + seq_printf(m, " %d", GROUP_AT(ug->gi, i)); + seq_printf(m, "\n"); + return 0; +} + +struct cache_detail unix_gid_cache = { + .owner = THIS_MODULE, + .hash_size = GID_HASHMAX, + .hash_table = gid_table, + .name = "auth.unix.gid", + .cache_put = unix_gid_put, + .cache_request = unix_gid_request, + .cache_parse = unix_gid_parse, + .cache_show = unix_gid_show, + .match = unix_gid_match, + .init = unix_gid_init, + .update = unix_gid_update, + .alloc = unix_gid_alloc, +}; + +static struct unix_gid *unix_gid_lookup(uid_t uid) +{ + struct unix_gid ug; + struct cache_head *ch; + + ug.uid = uid; + ch = sunrpc_cache_lookup(&unix_gid_cache, &ug.h, + hash_long(uid, GID_HASHBITS)); + if (ch) + return container_of(ch, struct unix_gid, h); + else + return NULL; +} + +static int unix_gid_find(uid_t uid, struct group_info **gip, + struct svc_rqst *rqstp) +{ + struct unix_gid *ug = unix_gid_lookup(uid); + if (!ug) + return -EAGAIN; + switch (cache_check(&unix_gid_cache, &ug->h, &rqstp->rq_chandle)) { + case -ENOENT: + *gip = NULL; + return 0; + case 0: + *gip = ug->gi; + get_group_info(*gip); + return 0; + default: + return -EAGAIN; + } +} + static int svcauth_unix_set_client(struct svc_rqst *rqstp) { @@ -543,12 +751,19 @@ svcauth_unix_accept(struct svc_rqst *rqstp, __be32 *authp) slen = svc_getnl(argv); /* gids length */ if (slen > 16 || (len -= (slen + 2)*4) < 0) goto badcred; - cred->cr_group_info = groups_alloc(slen); - if (cred->cr_group_info == NULL) + if (unix_gid_find(cred->cr_uid, &cred->cr_group_info, rqstp) + == -EAGAIN) return SVC_DROP; - for (i = 0; i < slen; i++) - GROUP_AT(cred->cr_group_info, i) = svc_getnl(argv); - + if (cred->cr_group_info == NULL) { + cred->cr_group_info = groups_alloc(slen); + if (cred->cr_group_info == NULL) + return SVC_DROP; + for (i = 0; i < slen; i++) + GROUP_AT(cred->cr_group_info, i) = svc_getnl(argv); + } else { + for (i = 0; i < slen ; i++) + svc_getnl(argv); + } if (svc_getu32(argv) != htonl(RPC_AUTH_NULL) || svc_getu32(argv) != 0) { *authp = rpc_autherr_badverf; return SVC_DENIED; -- cgit v0.10.2 From cd354f1ae75e6466a7e31b727faede57a1f89ca5 Mon Sep 17 00:00:00 2001 From: Tim Schmielau Date: Wed, 14 Feb 2007 00:33:14 -0800 Subject: [PATCH] remove many unneeded #includes of sched.h After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau Acked-by: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/acorn/block/mfmhd.c b/drivers/acorn/block/mfmhd.c index 7fde8f4..689a4c3 100644 --- a/drivers/acorn/block/mfmhd.c +++ b/drivers/acorn/block/mfmhd.c @@ -99,7 +99,6 @@ */ #include -#include #include #include #include diff --git a/drivers/acorn/char/i2c.c b/drivers/acorn/char/i2c.c index 157d8b7..d276fd1 100644 --- a/drivers/acorn/char/i2c.c +++ b/drivers/acorn/char/i2c.c @@ -14,7 +14,6 @@ */ #include #include -#include #include #include #include diff --git a/drivers/acpi/i2c_ec.c b/drivers/acpi/i2c_ec.c index bb54b6c..76ec8b6 100644 --- a/drivers/acpi/i2c_ec.c +++ b/drivers/acpi/i2c_ec.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/acpi/sleep/poweroff.c b/drivers/acpi/sleep/poweroff.c index 47fb4b3..d9801ef 100644 --- a/drivers/acpi/sleep/poweroff.c +++ b/drivers/acpi/sleep/poweroff.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include "sleep.h" diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c index ba4cb20..45bd173 100644 --- a/drivers/acpi/tables.c +++ b/drivers/acpi/tables.c @@ -25,7 +25,6 @@ #include #include -#include #include #include #include diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index f76d316..986afd4 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -36,7 +36,8 @@ #include #include #include -#include +#include +#include #include #include #include diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 92cdb0c..6a3543e 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -39,7 +39,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c index b4ed8ce..857ac23 100644 --- a/drivers/ata/pdc_adma.c +++ b/drivers/ata/pdc_adma.c @@ -39,7 +39,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 769eca5..d689df5 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -28,7 +28,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index 3be4cc3..b2e2e69 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -37,7 +37,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c index bfa35ed..6097d8f 100644 --- a/drivers/ata/sata_qstor.c +++ b/drivers/ata/sata_qstor.c @@ -34,7 +34,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index 06e87a3..0ebd77b 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -37,7 +37,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/atm/adummy.c b/drivers/atm/adummy.c index ac2c108..8d60c4e 100644 --- a/drivers/atm/adummy.c +++ b/drivers/atm/adummy.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c index 4aeb3d0..a7c0ed3 100644 --- a/drivers/atm/fore200e.c +++ b/drivers/atm/fore200e.c @@ -29,7 +29,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/atm/idt77105.c b/drivers/atm/idt77105.c index 325325a..0bd657f 100644 --- a/drivers/atm/idt77105.c +++ b/drivers/atm/idt77105.c @@ -4,7 +4,6 @@ #include -#include #include #include #include diff --git a/drivers/atm/uPD98402.c b/drivers/atm/uPD98402.c index 9504cce..fc8cb07 100644 --- a/drivers/atm/uPD98402.c +++ b/drivers/atm/uPD98402.c @@ -4,7 +4,6 @@ #include -#include /* for jiffies */ #include #include #include diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c index 756d4f7..0d7091e 100644 --- a/drivers/atm/zatm.c +++ b/drivers/atm/zatm.c @@ -4,7 +4,6 @@ #include -#include #include #include #include diff --git a/drivers/block/acsi.c b/drivers/block/acsi.c index 706cdc6..e3d9152 100644 --- a/drivers/block/acsi.c +++ b/drivers/block/acsi.c @@ -46,7 +46,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c index 9d9bff2..99e2c8c 100644 --- a/drivers/block/paride/pd.c +++ b/drivers/block/paride/pd.c @@ -153,7 +153,6 @@ enum {D_PRT, D_PRO, D_UNI, D_MOD, D_GEO, D_SBY, D_DLY, D_SLV}; #include #include #include -#include #include static DEFINE_SPINLOCK(pd_lock); diff --git a/drivers/block/umem.c b/drivers/block/umem.c index 30f16bd..dff3766 100644 --- a/drivers/block/umem.c +++ b/drivers/block/umem.c @@ -35,7 +35,6 @@ */ //#define DEBUG /* uncomment if you want debugging info (pr_debug) */ -#include #include #include #include diff --git a/drivers/bluetooth/bfusb.c b/drivers/bluetooth/bfusb.c index 31ade99..27cceb6 100644 --- a/drivers/bluetooth/bfusb.c +++ b/drivers/bluetooth/bfusb.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #include diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c index aae3aba..34e5555 100644 --- a/drivers/bluetooth/bt3c_cs.c +++ b/drivers/bluetooth/bt3c_cs.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c index 92648ef..c1bce75 100644 --- a/drivers/bluetooth/btuart_cs.c +++ b/drivers/bluetooth/btuart_cs.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c index 77b99ee..459aa97 100644 --- a/drivers/bluetooth/dtl1_cs.c +++ b/drivers/bluetooth/dtl1_cs.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c index 5e2c318..d66064c 100644 --- a/drivers/bluetooth/hci_bcsp.c +++ b/drivers/bluetooth/hci_bcsp.c @@ -26,7 +26,6 @@ #include #include -#include #include #include #include diff --git a/drivers/bluetooth/hci_h4.c b/drivers/bluetooth/hci_h4.c index ad62abb..34f0afc 100644 --- a/drivers/bluetooth/hci_h4.c +++ b/drivers/bluetooth/hci_h4.c @@ -27,7 +27,6 @@ #include #include -#include #include #include #include diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index 420b645..0f4203b 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -27,7 +27,6 @@ #include #include -#include #include #include #include diff --git a/drivers/bluetooth/hci_usb.c b/drivers/bluetooth/hci_usb.c index 6bdf593..406af57 100644 --- a/drivers/bluetooth/hci_usb.c +++ b/drivers/bluetooth/hci_usb.c @@ -35,7 +35,6 @@ #include #include -#include #include #include #include diff --git a/drivers/cdrom/aztcd.c b/drivers/cdrom/aztcd.c index ec46949..1f9fb7a 100644 --- a/drivers/cdrom/aztcd.c +++ b/drivers/cdrom/aztcd.c @@ -170,7 +170,6 @@ #include #include -#include #include #include #include diff --git a/drivers/cdrom/cm206.c b/drivers/cdrom/cm206.c index b6c61bb..2301311 100644 --- a/drivers/cdrom/cm206.c +++ b/drivers/cdrom/cm206.c @@ -183,7 +183,6 @@ History: #include /* These include what we really need */ #include #include -#include #include #include #include diff --git a/drivers/cdrom/gscd.c b/drivers/cdrom/gscd.c index fa70824..b3ab6e9 100644 --- a/drivers/cdrom/gscd.c +++ b/drivers/cdrom/gscd.c @@ -53,7 +53,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/cdrom/sjcd.c b/drivers/cdrom/sjcd.c index bf5aef4e5..5409fca 100644 --- a/drivers/cdrom/sjcd.c +++ b/drivers/cdrom/sjcd.c @@ -60,7 +60,6 @@ #include #include -#include #include #include #include diff --git a/drivers/char/briq_panel.c b/drivers/char/briq_panel.c index 7f60a18..8dcf9d2 100644 --- a/drivers/char/briq_panel.c +++ b/drivers/char/briq_panel.c @@ -8,7 +8,6 @@ #include #include -#include #include #include #include diff --git a/drivers/char/drm/ffb_context.c b/drivers/char/drm/ffb_context.c index 1383727..ac9ab40 100644 --- a/drivers/char/drm/ffb_context.c +++ b/drivers/char/drm/ffb_context.c @@ -7,7 +7,6 @@ * for authors. */ -#include #include #include "ffb.h" diff --git a/drivers/char/drm/ffb_drv.c b/drivers/char/drm/ffb_drv.c index dd45111..9a19879 100644 --- a/drivers/char/drm/ffb_drv.c +++ b/drivers/char/drm/ffb_drv.c @@ -9,7 +9,6 @@ #include "ffb_drv.h" -#include #include #include #include diff --git a/drivers/char/ds1620.c b/drivers/char/ds1620.c index 48cb8f0..3d7efc2 100644 --- a/drivers/char/ds1620.c +++ b/drivers/char/ds1620.c @@ -3,7 +3,6 @@ * thermometer driver (as used in the Rebel.com NetWinder) */ #include -#include #include #include #include diff --git a/drivers/char/dsp56k.c b/drivers/char/dsp56k.c index 06f2dbf..db984e4 100644 --- a/drivers/char/dsp56k.c +++ b/drivers/char/dsp56k.c @@ -25,7 +25,6 @@ #include #include /* for kmalloc() and kfree() */ -#include /* for struct wait_queue etc */ #include #include #include diff --git a/drivers/char/hvsi.c b/drivers/char/hvsi.c index d780683..50315d6 100644 --- a/drivers/char/hvsi.c +++ b/drivers/char/hvsi.c @@ -39,7 +39,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/char/ipmi/ipmi_devintf.c b/drivers/char/ipmi/ipmi_devintf.c index ff2d052..c2aa44e 100644 --- a/drivers/char/ipmi/ipmi_devintf.c +++ b/drivers/char/ipmi/ipmi_devintf.c @@ -35,7 +35,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 3aff5e9..8e222f2 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -34,7 +34,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/char/nvram.c b/drivers/char/nvram.c index a39f19c..204deaa 100644 --- a/drivers/char/nvram.c +++ b/drivers/char/nvram.c @@ -37,7 +37,6 @@ #define NVRAM_VERSION "1.2" #include -#include #include #include diff --git a/drivers/char/nwflash.c b/drivers/char/nwflash.c index 206cf6f..ba012c2 100644 --- a/drivers/char/nwflash.c +++ b/drivers/char/nwflash.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/char/pty.c b/drivers/char/pty.c index c07a1b5..de14aea 100644 --- a/drivers/char/pty.c +++ b/drivers/char/pty.c @@ -14,7 +14,6 @@ #include /* For EXPORT_SYMBOL */ #include -#include #include #include #include diff --git a/drivers/char/ser_a2232.c b/drivers/char/ser_a2232.c index 75de5f6..3c86914 100644 --- a/drivers/char/ser_a2232.c +++ b/drivers/char/ser_a2232.c @@ -86,7 +86,6 @@ #include #include -#include #include #include #include diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c index 17d54e1..7823757 100644 --- a/drivers/char/sonypi.c +++ b/drivers/char/sonypi.c @@ -36,7 +36,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/char/tlclk.c b/drivers/char/tlclk.c index 4fac2bd..35e5803 100644 --- a/drivers/char/tlclk.c +++ b/drivers/char/tlclk.c @@ -29,7 +29,6 @@ #include #include -#include #include /* printk() */ #include /* everything... */ #include /* error codes */ diff --git a/drivers/char/toshiba.c b/drivers/char/toshiba.c index c346ec5..5422f99 100644 --- a/drivers/char/toshiba.c +++ b/drivers/char/toshiba.c @@ -58,7 +58,6 @@ #include #include -#include #include #include #include diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c index 2f572b9..e5a254a 100644 --- a/drivers/char/tpm/tpm.c +++ b/drivers/char/tpm/tpm.c @@ -23,7 +23,6 @@ * */ -#include #include #include #include "tpm.h" diff --git a/drivers/char/vc_screen.c b/drivers/char/vc_screen.c index 2677651..7919303 100644 --- a/drivers/char/vc_screen.c +++ b/drivers/char/vc_screen.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/char/vme_scc.c b/drivers/char/vme_scc.c index e01317c..bef6d88 100644 --- a/drivers/char/vme_scc.c +++ b/drivers/char/vme_scc.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c index eef0270..05d6c22 100644 --- a/drivers/cpufreq/cpufreq_conservative.c +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/crypto/geode-aes.c b/drivers/crypto/geode-aes.c index 31ea405..0eb6284 100644 --- a/drivers/crypto/geode-aes.c +++ b/drivers/crypto/geode-aes.c @@ -8,7 +8,6 @@ #include #include -#include #include #include #include diff --git a/drivers/fc4/fc_syms.c b/drivers/fc4/fc_syms.c index 8700a80..bd3918d 100644 --- a/drivers/fc4/fc_syms.c +++ b/drivers/fc4/fc_syms.c @@ -6,7 +6,6 @@ #ifdef CONFIG_MODULES -#include #include #include #include diff --git a/drivers/fc4/soc.c b/drivers/fc4/soc.c index b09dfc7..d517734 100644 --- a/drivers/fc4/soc.c +++ b/drivers/fc4/soc.c @@ -22,7 +22,6 @@ static char *version = #include #include -#include #include #include #include diff --git a/drivers/fc4/socal.c b/drivers/fc4/socal.c index a6b1ae2..c903ebf 100644 --- a/drivers/fc4/socal.c +++ b/drivers/fc4/socal.c @@ -17,7 +17,6 @@ static char *version = #include #include -#include #include #include #include diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 8c7d48e..7452399 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index 0b0a87b..6fd8ad7 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -57,7 +57,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index c537441..e4e0df1 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -64,7 +64,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index 91fbc0e..fa6155a 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -42,7 +42,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index 14ad991..5bba3fb 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 8c3569a..21f2671 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -48,7 +48,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c index d108ab4..20ee4f7 100644 --- a/drivers/i2c/busses/i2c-iop3xx.c +++ b/drivers/i2c/busses/i2c-iop3xx.c @@ -36,7 +36,6 @@ #include #include #include -#include #include #include diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index 6535551..1514ec5 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -44,7 +44,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c index f28a76d..e417c2c 100644 --- a/drivers/i2c/busses/i2c-ocores.c +++ b/drivers/i2c/busses/i2c-ocores.c @@ -11,7 +11,6 @@ #include #include -#include #include #include #include diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 03d0aee..d888293 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -35,7 +35,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 4ca6de2..556f244 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -28,7 +28,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index 869a635..73dae44 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -37,7 +37,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c index cec3a0c..bfce13c 100644 --- a/drivers/i2c/chips/eeprom.c +++ b/drivers/i2c/chips/eeprom.c @@ -30,7 +30,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index 30a5780..afb71c6 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -26,7 +26,6 @@ #include #include -#include #include #include #include diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index 7efd28a..a5023cd 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -34,7 +34,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c index 0ac9da3..82de2d7 100644 --- a/drivers/ide/ppc/mpc8xx.c +++ b/drivers/ide/ppc/mpc8xx.c @@ -12,7 +12,6 @@ */ #include -#include #include #include #include diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 91c5344..d8ea237 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -24,7 +24,6 @@ */ #include #include -#include #include #include #include diff --git a/drivers/ieee1394/eth1394.c b/drivers/ieee1394/eth1394.c index 97e5c3d..a953135 100644 --- a/drivers/ieee1394/eth1394.c +++ b/drivers/ieee1394/eth1394.c @@ -43,7 +43,6 @@ #include -#include #include #include #include diff --git a/drivers/ieee1394/iso.c b/drivers/ieee1394/iso.c index 08bd15d..c6227e5 100644 --- a/drivers/ieee1394/iso.c +++ b/drivers/ieee1394/iso.c @@ -10,7 +10,6 @@ */ #include -#include #include #include "hosts.h" diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c index 5729e41..e982d60 100644 --- a/drivers/ieee1394/ohci1394.c +++ b/drivers/ieee1394/ohci1394.c @@ -102,7 +102,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/infiniband/core/cache.c b/drivers/infiniband/core/cache.c index 98272fb..558c9a0 100644 --- a/drivers/infiniband/core/cache.c +++ b/drivers/infiniband/core/cache.c @@ -38,7 +38,6 @@ #include #include #include -#include /* INIT_WORK, schedule_work(), flush_scheduled_work() */ #include diff --git a/drivers/input/ff-memless.c b/drivers/input/ff-memless.c index eba18b6..d226d93 100644 --- a/drivers/input/ff-memless.c +++ b/drivers/input/ff-memless.c @@ -29,7 +29,7 @@ #include #include #include -#include +#include #include "fixp-arith.h" diff --git a/drivers/input/input.c b/drivers/input/input.c index 14d4c049..efa1b1f 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -11,7 +11,6 @@ */ #include -#include #include #include #include diff --git a/drivers/input/mouse/rpcmouse.c b/drivers/input/mouse/rpcmouse.c index fbdcfd8..355efd0 100644 --- a/drivers/input/mouse/rpcmouse.c +++ b/drivers/input/mouse/rpcmouse.c @@ -18,7 +18,6 @@ */ #include -#include #include #include #include diff --git a/drivers/input/serio/hil_mlc.c b/drivers/input/serio/hil_mlc.c index 49e11e2..4fa93ff 100644 --- a/drivers/input/serio/hil_mlc.c +++ b/drivers/input/serio/hil_mlc.c @@ -59,7 +59,6 @@ #include #include #include -#include #include MODULE_AUTHOR("Brian S. Julin "); diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c index 9907ad3..b57370d 100644 --- a/drivers/input/serio/hp_sdc.c +++ b/drivers/input/serio/hp_sdc.c @@ -62,7 +62,6 @@ */ #include -#include #include #include #include diff --git a/drivers/isdn/capi/capidrv.c b/drivers/isdn/capi/capidrv.c index 8cec9c3..2a49cea 100644 --- a/drivers/isdn/capi/capidrv.c +++ b/drivers/isdn/capi/capidrv.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c index eba1046..a5b941c 100644 --- a/drivers/isdn/hardware/avm/avm_cs.c +++ b/drivers/isdn/hardware/avm/avm_cs.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/isdn/hardware/eicon/divamnt.c b/drivers/isdn/hardware/eicon/divamnt.c index 6b2940e..4aba5c5 100644 --- a/drivers/isdn/hardware/eicon/divamnt.c +++ b/drivers/isdn/hardware/eicon/divamnt.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/isdn/hardware/eicon/divasmain.c b/drivers/isdn/hardware/eicon/divasmain.c index b365e44..5e862e2 100644 --- a/drivers/isdn/hardware/eicon/divasmain.c +++ b/drivers/isdn/hardware/eicon/divasmain.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c index 9e70c20..fc6cc2c 100644 --- a/drivers/isdn/hisax/avma1_cs.c +++ b/drivers/isdn/hisax/avma1_cs.c @@ -14,7 +14,6 @@ #include #include -#include #include #include #include diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c index 79ab9dd..db7e644 100644 --- a/drivers/isdn/hisax/elsa_cs.c +++ b/drivers/isdn/hisax/elsa_cs.c @@ -38,7 +38,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c index 42bbae2..9f44d3e 100644 --- a/drivers/isdn/hisax/hfc_usb.c +++ b/drivers/isdn/hisax/hfc_usb.c @@ -38,7 +38,6 @@ #include #include #include -#include #include "hisax.h" #include "hisax_if.h" #include "hfc_usb.h" diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c index 45debde..439cb53 100644 --- a/drivers/isdn/hisax/sedlbauer_cs.c +++ b/drivers/isdn/hisax/sedlbauer_cs.c @@ -38,7 +38,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c index 3e3e182..ab4bd45 100644 --- a/drivers/isdn/hisax/teles_cs.c +++ b/drivers/isdn/hisax/teles_cs.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/isdn/hysdn/boardergo.c b/drivers/isdn/hysdn/boardergo.c index a120649..84dccd5 100644 --- a/drivers/isdn/hysdn/boardergo.c +++ b/drivers/isdn/hysdn/boardergo.c @@ -14,7 +14,6 @@ * */ -#include #include #include #include diff --git a/drivers/isdn/hysdn/hysdn_sched.c b/drivers/isdn/hysdn/hysdn_sched.c index 1875877..b7b5aa4 100644 --- a/drivers/isdn/hysdn/hysdn_sched.c +++ b/drivers/isdn/hysdn/hysdn_sched.c @@ -11,7 +11,6 @@ * */ -#include #include #include #include diff --git a/drivers/isdn/i4l/isdn_bsdcomp.c b/drivers/isdn/i4l/isdn_bsdcomp.c index a20f33b..90a2379 100644 --- a/drivers/isdn/i4l/isdn_bsdcomp.c +++ b/drivers/isdn/i4l/isdn_bsdcomp.c @@ -56,7 +56,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/isdn/pcbit/callbacks.c b/drivers/isdn/pcbit/callbacks.c index f151f36..43ecd0f 100644 --- a/drivers/isdn/pcbit/callbacks.c +++ b/drivers/isdn/pcbit/callbacks.c @@ -15,7 +15,6 @@ * NULL pointer dereference in cb_in_1 (originally fixed in 2.0) */ -#include #include #include diff --git a/drivers/isdn/pcbit/capi.c b/drivers/isdn/pcbit/capi.c index bef321d0..47c59e9 100644 --- a/drivers/isdn/pcbit/capi.c +++ b/drivers/isdn/pcbit/capi.c @@ -27,7 +27,6 @@ * encode our number in CallerPN and ConnectedPN */ -#include #include #include diff --git a/drivers/isdn/pcbit/drv.c b/drivers/isdn/pcbit/drv.c index 386c5ce..8c66bcb 100644 --- a/drivers/isdn/pcbit/drv.c +++ b/drivers/isdn/pcbit/drv.c @@ -19,7 +19,6 @@ #include -#include #include diff --git a/drivers/isdn/pcbit/edss1.c b/drivers/isdn/pcbit/edss1.c index 1ad8b07..37e9626 100644 --- a/drivers/isdn/pcbit/edss1.c +++ b/drivers/isdn/pcbit/edss1.c @@ -15,7 +15,6 @@ * move state/event descriptions to a user space logger */ -#include #include #include diff --git a/drivers/isdn/pcbit/layer2.c b/drivers/isdn/pcbit/layer2.c index 58eee50..5ba2a87 100644 --- a/drivers/isdn/pcbit/layer2.c +++ b/drivers/isdn/pcbit/layer2.c @@ -24,7 +24,6 @@ * re-write/remove debug printks */ -#include #include #include #include diff --git a/drivers/isdn/pcbit/module.c b/drivers/isdn/pcbit/module.c index 7b7b177..04ea241 100644 --- a/drivers/isdn/pcbit/module.c +++ b/drivers/isdn/pcbit/module.c @@ -11,7 +11,6 @@ #include #include -#include #include #include #include diff --git a/drivers/macintosh/macio-adb.c b/drivers/macintosh/macio-adb.c index 797cef7..026b67f 100644 --- a/drivers/macintosh/macio-adb.c +++ b/drivers/macintosh/macio-adb.c @@ -6,7 +6,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/macintosh/via-cuda.c b/drivers/macintosh/via-cuda.c index 3797f50..d58fcf6 100644 --- a/drivers/macintosh/via-cuda.c +++ b/drivers/macintosh/via-cuda.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/macintosh/via-macii.c b/drivers/macintosh/via-macii.c index 175b3e5..1b3bad6 100644 --- a/drivers/macintosh/via-macii.c +++ b/drivers/macintosh/via-macii.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/macintosh/via-maciisi.c b/drivers/macintosh/via-maciisi.c index 10051db..2dc7880 100644 --- a/drivers/macintosh/via-maciisi.c +++ b/drivers/macintosh/via-maciisi.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/macintosh/via-pmu68k.c b/drivers/macintosh/via-pmu68k.c index 54baee5..356c721 100644 --- a/drivers/macintosh/via-pmu68k.c +++ b/drivers/macintosh/via-pmu68k.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c index 988499d..fc77de4 100644 --- a/drivers/media/dvb/dvb-core/dmxdev.c +++ b/drivers/media/dvb/dvb-core/dmxdev.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/media/dvb/dvb-core/dvbdev.c b/drivers/media/dvb/dvb-core/dvbdev.c index 40774fe..826b47f 100644 --- a/drivers/media/dvb/dvb-core/dvbdev.c +++ b/drivers/media/dvb/dvb-core/dvbdev.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/media/dvb/ttpci/av7110_av.c b/drivers/media/dvb/ttpci/av7110_av.c index 8c577cf..795e6e9 100644 --- a/drivers/media/dvb/ttpci/av7110_av.c +++ b/drivers/media/dvb/ttpci/av7110_av.c @@ -31,7 +31,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/media/dvb/ttpci/av7110_ca.c b/drivers/media/dvb/ttpci/av7110_ca.c index dd9aee3..4251a97 100644 --- a/drivers/media/dvb/ttpci/av7110_ca.c +++ b/drivers/media/dvb/ttpci/av7110_ca.c @@ -29,7 +29,6 @@ */ #include -#include #include #include #include diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c index 37de2e8..4d7150e 100644 --- a/drivers/media/dvb/ttpci/av7110_hw.c +++ b/drivers/media/dvb/ttpci/av7110_hw.c @@ -32,7 +32,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/dvb/ttpci/av7110_v4l.c index 10cfe31..dbfd5e7 100644 --- a/drivers/media/dvb/ttpci/av7110_v4l.c +++ b/drivers/media/dvb/ttpci/av7110_v4l.c @@ -26,7 +26,6 @@ */ #include -#include #include #include #include diff --git a/drivers/media/radio/miropcm20-rds.c b/drivers/media/radio/miropcm20-rds.c index c93490e..aed1147 100644 --- a/drivers/media/radio/miropcm20-rds.c +++ b/drivers/media/radio/miropcm20-rds.c @@ -14,7 +14,6 @@ #include #include #include -#include /* current, TASK_*, schedule_timeout() */ #include #include #include "miropcm20-rds-core.h" diff --git a/drivers/media/radio/radio-maestro.c b/drivers/media/radio/radio-maestro.c index 9bba6eb..e67b7f2 100644 --- a/drivers/media/radio/radio-maestro.c +++ b/drivers/media/radio/radio-maestro.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c index 00a2f31..6beeb74 100644 --- a/drivers/media/radio/radio-maxiradio.c +++ b/drivers/media/radio/radio-maxiradio.c @@ -35,7 +35,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/media/video/adv7170.c b/drivers/media/video/adv7170.c index 4870958..2aa9ce9 100644 --- a/drivers/media/video/adv7170.c +++ b/drivers/media/video/adv7170.c @@ -42,7 +42,6 @@ #include #include #include -#include #include #include diff --git a/drivers/media/video/adv7175.c b/drivers/media/video/adv7175.c index 68e7d7a..a3246a2 100644 --- a/drivers/media/video/adv7175.c +++ b/drivers/media/video/adv7175.c @@ -38,7 +38,6 @@ #include #include #include -#include #include #include diff --git a/drivers/media/video/bt819.c b/drivers/media/video/bt819.c index e7b38fd..6867386 100644 --- a/drivers/media/video/bt819.c +++ b/drivers/media/video/bt819.c @@ -42,7 +42,6 @@ #include #include #include -#include #include #include diff --git a/drivers/media/video/bt856.c b/drivers/media/video/bt856.c index af3b61d..42e2299 100644 --- a/drivers/media/video/bt856.c +++ b/drivers/media/video/bt856.c @@ -42,7 +42,6 @@ #include #include #include -#include #include #include diff --git a/drivers/media/video/bt8xx/bttv-vbi.c b/drivers/media/video/bt8xx/bttv-vbi.c index 63676e7..6fc6b02 100644 --- a/drivers/media/video/bt8xx/bttv-vbi.c +++ b/drivers/media/video/bt8xx/bttv-vbi.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/media/video/cx88/cx88-tvaudio.c b/drivers/media/video/cx88/cx88-tvaudio.c index 2bd84d3..063df03 100644 --- a/drivers/media/video/cx88/cx88-tvaudio.c +++ b/drivers/media/video/cx88/cx88-tvaudio.c @@ -46,7 +46,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c index 3ffb568..55d45b0 100644 --- a/drivers/media/video/em28xx/em28xx-input.c +++ b/drivers/media/video/em28xx/em28xx-input.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/media/video/indycam.c b/drivers/media/video/indycam.c index 7420b79..5c2c402 100644 --- a/drivers/media/video/indycam.c +++ b/drivers/media/video/indycam.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c index 59edf58..210582d 100644 --- a/drivers/media/video/ir-kbd-i2c.c +++ b/drivers/media/video/ir-kbd-i2c.c @@ -31,7 +31,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/media/video/meye.c b/drivers/media/video/meye.c index 9528e10..98681da 100644 --- a/drivers/media/video/meye.c +++ b/drivers/media/video/meye.c @@ -28,7 +28,6 @@ */ #include #include -#include #include #include #include diff --git a/drivers/media/video/pms.c b/drivers/media/video/pms.c index d38d3dc..b5a67f0 100644 --- a/drivers/media/video/pms.c +++ b/drivers/media/video/pms.c @@ -28,7 +28,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/media/video/saa5246a.c b/drivers/media/video/saa5246a.c index 0b5d159..76f5f5d 100644 --- a/drivers/media/video/saa5246a.c +++ b/drivers/media/video/saa5246a.c @@ -40,7 +40,6 @@ #include #include -#include #include #include #include diff --git a/drivers/media/video/saa7111.c b/drivers/media/video/saa7111.c index 686fd47..44dc747 100644 --- a/drivers/media/video/saa7111.c +++ b/drivers/media/video/saa7111.c @@ -41,7 +41,6 @@ #include #include #include -#include #include #include diff --git a/drivers/media/video/saa7114.c b/drivers/media/video/saa7114.c index 90398ab..2ce3321 100644 --- a/drivers/media/video/saa7114.c +++ b/drivers/media/video/saa7114.c @@ -44,7 +44,6 @@ #include #include #include -#include #include #include diff --git a/drivers/media/video/saa711x.c b/drivers/media/video/saa711x.c index 708fae5..269d711 100644 --- a/drivers/media/video/saa711x.c +++ b/drivers/media/video/saa711x.c @@ -35,7 +35,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/media/video/saa7134/saa6752hs.c b/drivers/media/video/saa7134/saa6752hs.c index afc8f35..57f1f5d 100644 --- a/drivers/media/video/saa7134/saa6752hs.c +++ b/drivers/media/video/saa7134/saa6752hs.c @@ -1,6 +1,5 @@ #include #include -#include #include #include #include diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index 60b38de..e425268 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include diff --git a/drivers/media/video/saa7185.c b/drivers/media/video/saa7185.c index 9c30841..e0fdb1a 100644 --- a/drivers/media/video/saa7185.c +++ b/drivers/media/video/saa7185.c @@ -38,7 +38,6 @@ #include #include #include -#include #include #include diff --git a/drivers/media/video/saa7191.c b/drivers/media/video/saa7191.c index 746cadb..8615a60 100644 --- a/drivers/media/video/saa7191.c +++ b/drivers/media/video/saa7191.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include diff --git a/drivers/media/video/tda7432.c b/drivers/media/video/tda7432.c index 78e043a..d1ccc06 100644 --- a/drivers/media/video/tda7432.c +++ b/drivers/media/video/tda7432.c @@ -38,7 +38,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/media/video/tda9875.c b/drivers/media/video/tda9875.c index 827633b..00f0e8b 100644 --- a/drivers/media/video/tda9875.c +++ b/drivers/media/video/tda9875.c @@ -19,7 +19,6 @@ #include #include -#include #include #include #include diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index ee4a493..7be73e3 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -7,7 +7,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/media/video/tvmixer.c b/drivers/media/video/tvmixer.c index e2747bd..7ea9132 100644 --- a/drivers/media/video/tvmixer.c +++ b/drivers/media/video/tvmixer.c @@ -4,7 +4,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/media/video/usbvideo/ibmcam.c b/drivers/media/video/usbvideo/ibmcam.c index 76f771b..14db95e 100644 --- a/drivers/media/video/usbvideo/ibmcam.c +++ b/drivers/media/video/usbvideo/ibmcam.c @@ -15,7 +15,6 @@ */ #include -#include #include #include diff --git a/drivers/media/video/usbvideo/ultracam.c b/drivers/media/video/usbvideo/ultracam.c index 10c58b4..95453c1 100644 --- a/drivers/media/video/usbvideo/ultracam.c +++ b/drivers/media/video/usbvideo/ultracam.c @@ -6,7 +6,6 @@ */ #include -#include #include #include diff --git a/drivers/media/video/usbvision/usbvision-core.c b/drivers/media/video/usbvision/usbvision-core.c index a807d97..901f664 100644 --- a/drivers/media/video/usbvision/usbvision-core.c +++ b/drivers/media/video/usbvision/usbvision-core.c @@ -24,7 +24,6 @@ */ #include -#include #include #include #include diff --git a/drivers/media/video/usbvision/usbvision-i2c.c b/drivers/media/video/usbvision/usbvision-i2c.c index a242b76..609e1fd 100644 --- a/drivers/media/video/usbvision/usbvision-i2c.c +++ b/drivers/media/video/usbvision/usbvision-i2c.c @@ -34,7 +34,6 @@ #include #include #include -#include #include #include #include "usbvision.h" diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c index 4eb7330..af33653 100644 --- a/drivers/media/video/usbvision/usbvision-video.c +++ b/drivers/media/video/usbvision/usbvision-video.c @@ -46,7 +46,6 @@ #include #include -#include #include #include #include diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c index b87d571..b8ee37d 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/video/v4l2-common.c @@ -47,7 +47,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/media/video/videodev.c b/drivers/media/video/videodev.c index 30c3822..a786c1f 100644 --- a/drivers/media/video/videodev.c +++ b/drivers/media/video/videodev.c @@ -30,7 +30,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c index b7d4c72..0caaf64 100644 --- a/drivers/message/fusion/mptfc.c +++ b/drivers/message/fusion/mptfc.c @@ -53,7 +53,6 @@ #include /* for mdelay */ #include /* needed for in_interrupt() proto */ #include /* notifier code */ -#include #include #include diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index 84b8b48..404c014 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -48,7 +48,7 @@ #include #include #include -#include +#include #include #include /* for mdelay */ diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index c417ae0..2a3e9e6 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -54,7 +54,6 @@ #include /* for mdelay */ #include /* needed for in_interrupt() proto */ #include /* notifier code */ -#include #include #include diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c index c31a9e3..85f21b5 100644 --- a/drivers/message/fusion/mptspi.c +++ b/drivers/message/fusion/mptspi.c @@ -54,7 +54,6 @@ #include /* for mdelay */ #include /* needed for in_interrupt() proto */ #include /* notifier code */ -#include #include #include diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c index 05ba8ac..86439a0 100644 --- a/drivers/mmc/mmc_block.c +++ b/drivers/mmc/mmc_block.c @@ -20,7 +20,6 @@ #include #include -#include #include #include #include diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c index d8e7a02..2e51496 100644 --- a/drivers/mtd/chips/cfi_util.c +++ b/drivers/mtd/chips/cfi_util.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include diff --git a/drivers/mtd/devices/doc2001.c b/drivers/mtd/devices/doc2001.c index 0e2a932..fe71a12 100644 --- a/drivers/mtd/devices/doc2001.c +++ b/drivers/mtd/devices/doc2001.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/mtd/devices/doc2001plus.c b/drivers/mtd/devices/doc2001plus.c index 92dbb47..ba4db68 100644 --- a/drivers/mtd/devices/doc2001plus.c +++ b/drivers/mtd/devices/doc2001plus.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/mtd/devices/docecc.c b/drivers/mtd/devices/docecc.c index cd3db72..52b5d63 100644 --- a/drivers/mtd/devices/docecc.c +++ b/drivers/mtd/devices/docecc.c @@ -32,7 +32,6 @@ #include #include #include -#include #include #include diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c index 354e165..a4873ab 100644 --- a/drivers/mtd/devices/pmc551.c +++ b/drivers/mtd/devices/pmc551.c @@ -86,7 +86,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c index 5f49248..d293add 100644 --- a/drivers/mtd/devices/slram.c +++ b/drivers/mtd/devices/slram.c @@ -35,7 +35,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c index 24235d4..c815d0f 100644 --- a/drivers/mtd/ftl.c +++ b/drivers/mtd/ftl.c @@ -61,7 +61,6 @@ /*#define PSYCHO_DEBUG */ #include -#include #include #include #include diff --git a/drivers/mtd/inftlmount.c b/drivers/mtd/inftlmount.c index 8f6006f..acf3ba2 100644 --- a/drivers/mtd/inftlmount.c +++ b/drivers/mtd/inftlmount.c @@ -34,7 +34,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 7070110..c153b64 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -8,7 +8,6 @@ #include #include -#include #include #include #include diff --git a/drivers/mtd/nftlcore.c b/drivers/mtd/nftlcore.c index 4b1ba4f..e6ef7d7 100644 --- a/drivers/mtd/nftlcore.c +++ b/drivers/mtd/nftlcore.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include diff --git a/drivers/net/arm/ether1.c b/drivers/net/arm/ether1.c index d6da3ce..a292188 100644 --- a/drivers/net/arm/ether1.c +++ b/drivers/net/arm/ether1.c @@ -33,7 +33,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/arm/ether3.c b/drivers/net/arm/ether3.c index 4fc2347..8411783 100644 --- a/drivers/net/arm/ether3.c +++ b/drivers/net/arm/ether3.c @@ -48,7 +48,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c index 72c41f5..61f574a 100644 --- a/drivers/net/arm/etherh.c +++ b/drivers/net/arm/etherh.c @@ -28,7 +28,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c index f0b6879..69ae229 100644 --- a/drivers/net/au1000_eth.c +++ b/drivers/net/au1000_eth.c @@ -37,7 +37,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 61a6fa4..a7c8f98 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -35,7 +35,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 878f7aa..a122baa 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -22,7 +22,6 @@ */ #include #include -#include #include #include #include diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c index a03d781..8eb5712 100644 --- a/drivers/net/cris/eth_v10.c +++ b/drivers/net/cris/eth_v10.c @@ -222,7 +222,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/fec_8xx/fec_8xx-netta.c b/drivers/net/fec_8xx/fec_8xx-netta.c index 790d9db..e492eb8 100644 --- a/drivers/net/fec_8xx/fec_8xx-netta.c +++ b/drivers/net/fec_8xx/fec_8xx-netta.c @@ -4,7 +4,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/fec_8xx/fec_main.c b/drivers/net/fec_8xx/fec_main.c index 8e7a56f..77f747a 100644 --- a/drivers/net/fec_8xx/fec_main.c +++ b/drivers/net/fec_8xx/fec_main.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/net/fec_8xx/fec_mii.c b/drivers/net/fec_8xx/fec_mii.c index d3c16b8..e79700a 100644 --- a/drivers/net/fec_8xx/fec_mii.c +++ b/drivers/net/fec_8xx/fec_mii.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c index 889d3a1..4a05c14 100644 --- a/drivers/net/fs_enet/fs_enet-main.c +++ b/drivers/net/fs_enet/fs_enet-main.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/fs_enet/mac-fcc.c index 1ff2597..8545e84 100644 --- a/drivers/net/fs_enet/mac-fcc.c +++ b/drivers/net/fs_enet/mac-fcc.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/net/fs_enet/mac-fec.c b/drivers/net/fs_enet/mac-fec.c index ff68394..cdcfb96 100644 --- a/drivers/net/fs_enet/mac-fec.c +++ b/drivers/net/fs_enet/mac-fec.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/net/fs_enet/mac-scc.c b/drivers/net/fs_enet/mac-scc.c index afd7fca..65925b5 100644 --- a/drivers/net/fs_enet/mac-scc.c +++ b/drivers/net/fs_enet/mac-scc.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/net/fs_enet/mii-bitbang.c b/drivers/net/fs_enet/mii-bitbang.c index 0b9b8b5..f914478 100644 --- a/drivers/net/fs_enet/mii-bitbang.c +++ b/drivers/net/fs_enet/mii-bitbang.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/net/fs_enet/mii-fec.c b/drivers/net/fs_enet/mii-fec.c index baaae3d..235b177 100644 --- a/drivers/net/fs_enet/mii-fec.c +++ b/drivers/net/fs_enet/mii-fec.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index baa3514..1be4a84 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -65,7 +65,6 @@ */ #include -#include #include #include #include diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c index 0d6943d..7b411c1 100644 --- a/drivers/net/gianfar_ethtool.c +++ b/drivers/net/gianfar_ethtool.c @@ -16,7 +16,6 @@ */ #include -#include #include #include #include diff --git a/drivers/net/gianfar_mii.c b/drivers/net/gianfar_mii.c index ff684d4..bcc6b82 100644 --- a/drivers/net/gianfar_mii.c +++ b/drivers/net/gianfar_mii.c @@ -17,7 +17,6 @@ */ #include -#include #include #include #include diff --git a/drivers/net/gianfar_sysfs.c b/drivers/net/gianfar_sysfs.c index 9dd387f..45ffb5d 100644 --- a/drivers/net/gianfar_sysfs.c +++ b/drivers/net/gianfar_sysfs.c @@ -20,7 +20,6 @@ */ #include -#include #include #include #include diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c index ffeafb2..dd8ad87 100644 --- a/drivers/net/ibm_emac/ibm_emac_core.c +++ b/drivers/net/ibm_emac/ibm_emac_core.c @@ -21,7 +21,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/irda/ma600-sir.c b/drivers/net/irda/ma600-sir.c index ebed168..809906d 100644 --- a/drivers/net/irda/ma600-sir.c +++ b/drivers/net/irda/ma600-sir.c @@ -34,7 +34,6 @@ #include #include #include -#include #include diff --git a/drivers/net/meth.c b/drivers/net/meth.c index e1d97cd..d38b7c7 100644 --- a/drivers/net/meth.c +++ b/drivers/net/meth.c @@ -11,7 +11,6 @@ #include #include -#include #include /* printk() */ #include #include diff --git a/drivers/net/mipsnet.c b/drivers/net/mipsnet.c index c946998..f42b9e2 100644 --- a/drivers/net/mipsnet.c +++ b/drivers/net/mipsnet.c @@ -10,7 +10,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/net/phy/cicada.c b/drivers/net/phy/cicada.c index ae60e6e..a1bd599 100644 --- a/drivers/net/phy/cicada.c +++ b/drivers/net/phy/cicada.c @@ -14,7 +14,6 @@ * */ #include -#include #include #include #include diff --git a/drivers/net/phy/davicom.c b/drivers/net/phy/davicom.c index aa7983f..519baa3 100644 --- a/drivers/net/phy/davicom.c +++ b/drivers/net/phy/davicom.c @@ -14,7 +14,6 @@ * */ #include -#include #include #include #include diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c index 8613539..66da91b 100644 --- a/drivers/net/phy/fixed.c +++ b/drivers/net/phy/fixed.c @@ -14,7 +14,6 @@ * */ #include -#include #include #include #include diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c index 69d2325..4cf3324 100644 --- a/drivers/net/phy/lxt.c +++ b/drivers/net/phy/lxt.c @@ -14,7 +14,6 @@ * */ #include -#include #include #include #include diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 0ad2532..f4d4eb6 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -14,7 +14,6 @@ * */ #include -#include #include #include #include diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index cf6660c..b31ce27 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -14,7 +14,6 @@ * */ #include -#include #include #include #include diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 9765fa6..c94a1fb 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -16,7 +16,6 @@ * */ #include -#include #include #include #include diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index a4d7529..fdf45fd 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -15,7 +15,6 @@ * */ #include -#include #include #include #include diff --git a/drivers/net/phy/qsemi.c b/drivers/net/phy/qsemi.c index 2b50e17..23062d0 100644 --- a/drivers/net/phy/qsemi.c +++ b/drivers/net/phy/qsemi.c @@ -14,7 +14,6 @@ * */ #include -#include #include #include #include diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 8646b64..e8e0d94 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -59,7 +59,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/net/sungem_phy.c b/drivers/net/sungem_phy.c index d21991e..701ba4f 100644 --- a/drivers/net/sungem_phy.c +++ b/drivers/net/sungem_phy.c @@ -22,7 +22,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c index 893808a..d92c5c5 100644 --- a/drivers/net/tsi108_eth.c +++ b/drivers/net/tsi108_eth.c @@ -38,7 +38,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/net/ucc_geth_phy.c b/drivers/net/ucc_geth_phy.c index 6fda6d8..9373d895 100644 --- a/drivers/net/ucc_geth_phy.c +++ b/drivers/net/ucc_geth_phy.c @@ -18,7 +18,6 @@ */ #include -#include #include #include #include diff --git a/drivers/net/wan/cycx_drv.c b/drivers/net/wan/cycx_drv.c index e6d0057..d347d59 100644 --- a/drivers/net/wan/cycx_drv.c +++ b/drivers/net/wan/cycx_drv.c @@ -53,7 +53,6 @@ #include /* printk(), and other useful stuff */ #include /* offsetof(), etc. */ #include /* return codes */ -#include /* for jiffies, HZ, etc. */ #include /* API definitions */ #include /* CYCX firmware module definitions */ #include /* udelay, msleep_interruptible */ diff --git a/drivers/net/wan/pci200syn.c b/drivers/net/wan/pci200syn.c index a6b9c33..ca06a00 100644 --- a/drivers/net/wan/pci200syn.c +++ b/drivers/net/wan/pci200syn.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index 10bcb48..23eba69 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -42,7 +42,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_wx.c b/drivers/net/wireless/bcm43xx/bcm43xx_wx.c index a659442..d2ca949 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_wx.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_wx.c @@ -33,7 +33,6 @@ #include #include #include -#include /* for capable() */ #include #include "bcm43xx.h" diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c index e97cecb..309076b 100644 --- a/drivers/parisc/eisa.c +++ b/drivers/parisc/eisa.c @@ -33,7 +33,6 @@ #include #include #include -#include #include #include diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c index e60b4bf..316c06f 100644 --- a/drivers/parport/parport_cs.c +++ b/drivers/parport/parport_cs.c @@ -37,7 +37,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c index a7c5ead..17bf993 100644 --- a/drivers/parport/parport_gsc.c +++ b/drivers/parport/parport_gsc.c @@ -23,7 +23,6 @@ #include #include -#include #include #include #include diff --git a/drivers/pci/hotplug/ibmphp_ebda.c b/drivers/pci/hotplug/ibmphp_ebda.c index 05e4f5a..600ed7b6 100644 --- a/drivers/pci/hotplug/ibmphp_ebda.c +++ b/drivers/pci/hotplug/ibmphp_ebda.c @@ -28,7 +28,6 @@ */ #include -#include #include #include #include diff --git a/drivers/pci/syscall.c b/drivers/pci/syscall.c index 87fafc0..9d37fec 100644 --- a/drivers/pci/syscall.c +++ b/drivers/pci/syscall.c @@ -7,7 +7,6 @@ * magic northbridge registers.. */ -#include #include #include #include diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c index 3334f22..b318628 100644 --- a/drivers/pcmcia/at91_cf.c +++ b/drivers/pcmcia/at91_cf.c @@ -11,7 +11,6 @@ #include #include -#include #include #include #include diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c index 912c03e..d154dee 100644 --- a/drivers/pcmcia/cistpl.c +++ b/drivers/pcmcia/cistpl.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c index 72ff2f6..71b3370 100644 --- a/drivers/pcmcia/i82365.c +++ b/drivers/pcmcia/i82365.c @@ -40,7 +40,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/pcmcia/m32r_cfc.c b/drivers/pcmcia/m32r_cfc.c index 3c22ac4..e4a9410 100644 --- a/drivers/pcmcia/m32r_cfc.c +++ b/drivers/pcmcia/m32r_cfc.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c index 4dbef07..67d28ee 100644 --- a/drivers/pcmcia/m32r_pcc.c +++ b/drivers/pcmcia/m32r_pcc.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c index 3b72be8..d059c91 100644 --- a/drivers/pcmcia/m8xx_pcmcia.c +++ b/drivers/pcmcia/m8xx_pcmcia.c @@ -46,7 +46,6 @@ #include #include -#include #include #include #include diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c index e65a6b8..76f7cbc 100644 --- a/drivers/pcmcia/omap_cf.c +++ b/drivers/pcmcia/omap_cf.c @@ -11,7 +11,6 @@ #include #include -#include #include #include #include diff --git a/drivers/pcmcia/pxa2xx_lubbock.c b/drivers/pcmcia/pxa2xx_lubbock.c index a92f111..5e9b9a3 100644 --- a/drivers/pcmcia/pxa2xx_lubbock.c +++ b/drivers/pcmcia/pxa2xx_lubbock.c @@ -16,7 +16,6 @@ */ #include #include -#include #include #include #include diff --git a/drivers/pcmcia/sa1100_badge4.c b/drivers/pcmcia/sa1100_badge4.c index 19b1e12..62bfc75 100644 --- a/drivers/pcmcia/sa1100_badge4.c +++ b/drivers/pcmcia/sa1100_badge4.c @@ -14,7 +14,6 @@ */ #include #include -#include #include #include #include diff --git a/drivers/pcmcia/sa1100_cerf.c b/drivers/pcmcia/sa1100_cerf.c index eb89928..549a152 100644 --- a/drivers/pcmcia/sa1100_cerf.c +++ b/drivers/pcmcia/sa1100_cerf.c @@ -7,7 +7,6 @@ */ #include #include -#include #include #include #include diff --git a/drivers/pcmcia/sa1100_h3600.c b/drivers/pcmcia/sa1100_h3600.c index 64fd5e3..e549187 100644 --- a/drivers/pcmcia/sa1100_h3600.c +++ b/drivers/pcmcia/sa1100_h3600.c @@ -6,7 +6,6 @@ */ #include #include -#include #include #include #include diff --git a/drivers/pcmcia/sa1100_jornada720.c b/drivers/pcmcia/sa1100_jornada720.c index 7a87298..af485ae 100644 --- a/drivers/pcmcia/sa1100_jornada720.c +++ b/drivers/pcmcia/sa1100_jornada720.c @@ -6,7 +6,6 @@ */ #include #include -#include #include #include #include diff --git a/drivers/pcmcia/sa1100_neponset.c b/drivers/pcmcia/sa1100_neponset.c index 5e34b3e..5bc9e95 100644 --- a/drivers/pcmcia/sa1100_neponset.c +++ b/drivers/pcmcia/sa1100_neponset.c @@ -5,7 +5,6 @@ */ #include #include -#include #include #include #include diff --git a/drivers/pcmcia/sa1100_shannon.c b/drivers/pcmcia/sa1100_shannon.c index 7bc9e59..9456f54 100644 --- a/drivers/pcmcia/sa1100_shannon.c +++ b/drivers/pcmcia/sa1100_shannon.c @@ -6,7 +6,6 @@ */ #include #include -#include #include #include diff --git a/drivers/pcmcia/sa1100_simpad.c b/drivers/pcmcia/sa1100_simpad.c index c2ecf11..04d6f7f 100644 --- a/drivers/pcmcia/sa1100_simpad.c +++ b/drivers/pcmcia/sa1100_simpad.c @@ -6,7 +6,6 @@ */ #include #include -#include #include #include diff --git a/drivers/pcmcia/vrc4171_card.c b/drivers/pcmcia/vrc4171_card.c index e90d8e8..206e26c 100644 --- a/drivers/pcmcia/vrc4171_card.c +++ b/drivers/pcmcia/vrc4171_card.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c index a61d768..20853a0 100644 --- a/drivers/pcmcia/yenta_socket.c +++ b/drivers/pcmcia/yenta_socket.c @@ -12,7 +12,6 @@ */ #include #include -#include #include #include #include diff --git a/drivers/rapidio/rio-sysfs.c b/drivers/rapidio/rio-sysfs.c index 5687b8f..eed9143 100644 --- a/drivers/rapidio/rio-sysfs.c +++ b/drivers/rapidio/rio-sysfs.c @@ -14,7 +14,6 @@ #include #include #include -#include /* for capable() */ #include "rio.h" diff --git a/drivers/s390/char/sclp_tty.c b/drivers/s390/char/sclp_tty.c index 90536f6..076816b 100644 --- a/drivers/s390/char/sclp_tty.c +++ b/drivers/s390/char/sclp_tty.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c index 544f137..f77dc33 100644 --- a/drivers/s390/char/sclp_vt220.c +++ b/drivers/s390/char/sclp_vt220.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/s390/net/ctcmain.c b/drivers/s390/net/ctcmain.c index 5a84fbb..0d6d5fc 100644 --- a/drivers/s390/net/ctcmain.c +++ b/drivers/s390/net/ctcmain.c @@ -45,7 +45,6 @@ #include #include #include -#include #include #include diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c index 6387b48..594320c 100644 --- a/drivers/s390/net/netiucv.c +++ b/drivers/s390/net/netiucv.c @@ -41,7 +41,6 @@ #include #include #include -#include #include #include diff --git a/drivers/sbus/char/cpwatchdog.c b/drivers/sbus/char/cpwatchdog.c index 0cfd1e4..022e869 100644 --- a/drivers/sbus/char/cpwatchdog.c +++ b/drivers/sbus/char/cpwatchdog.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/sbus/char/openprom.c b/drivers/sbus/char/openprom.c index e877623..eec28c1 100644 --- a/drivers/sbus/char/openprom.c +++ b/drivers/sbus/char/openprom.c @@ -31,7 +31,6 @@ #include #include -#include #include #include #include diff --git a/drivers/sbus/char/uctrl.c b/drivers/sbus/char/uctrl.c index 4d1a505..45cf5bc 100644 --- a/drivers/sbus/char/uctrl.c +++ b/drivers/sbus/char/uctrl.c @@ -5,7 +5,6 @@ */ #include -#include #include #include #include diff --git a/drivers/sbus/char/vfc_dev.c b/drivers/sbus/char/vfc_dev.c index 37a04a0..8bfb67c 100644 --- a/drivers/sbus/char/vfc_dev.c +++ b/drivers/sbus/char/vfc_dev.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c index 88e061d..cb02656 100644 --- a/drivers/scsi/53c700.c +++ b/drivers/scsi/53c700.c @@ -121,7 +121,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/NCR53c406a.c b/drivers/scsi/NCR53c406a.c index 8578555..7c0b17f 100644 --- a/drivers/scsi/NCR53c406a.c +++ b/drivers/scsi/NCR53c406a.c @@ -41,7 +41,6 @@ #include #include -#include #include #include #include diff --git a/drivers/scsi/a2091.c b/drivers/scsi/a2091.c index f77016d..b7c5385 100644 --- a/drivers/scsi/a2091.c +++ b/drivers/scsi/a2091.c @@ -1,7 +1,6 @@ #include #include #include -#include #include #include diff --git a/drivers/scsi/a3000.c b/drivers/scsi/a3000.c index 1299bc8..796f1c4 100644 --- a/drivers/scsi/a3000.c +++ b/drivers/scsi/a3000.c @@ -1,7 +1,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index ddb33b0..d789e61 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/aacraid/commctrl.c b/drivers/scsi/aacraid/commctrl.c index da1d3a9..e21070f 100644 --- a/drivers/scsi/aacraid/commctrl.c +++ b/drivers/scsi/aacraid/commctrl.c @@ -31,7 +31,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c index df67ba6..ae34768 100644 --- a/drivers/scsi/aacraid/comminit.c +++ b/drivers/scsi/aacraid/comminit.c @@ -32,7 +32,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/aacraid/dpcsup.c b/drivers/scsi/aacraid/dpcsup.c index 8335f07..d38b628 100644 --- a/drivers/scsi/aacraid/dpcsup.c +++ b/drivers/scsi/aacraid/dpcsup.c @@ -32,7 +32,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c index c632d93..d242e26 100644 --- a/drivers/scsi/aacraid/rx.c +++ b/drivers/scsi/aacraid/rx.c @@ -31,7 +31,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/aacraid/sa.c b/drivers/scsi/aacraid/sa.c index 8535db0..6f1a178 100644 --- a/drivers/scsi/aacraid/sa.c +++ b/drivers/scsi/aacraid/sa.c @@ -31,7 +31,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c index 0cec742..4b4d123 100644 --- a/drivers/scsi/aha152x.c +++ b/drivers/scsi/aha152x.c @@ -236,7 +236,6 @@ **************************************************************************/ #include -#include #include #include #include diff --git a/drivers/scsi/aic7xxx_old.c b/drivers/scsi/aic7xxx_old.c index 7d1fec6..a988d5a 100644 --- a/drivers/scsi/aic7xxx_old.c +++ b/drivers/scsi/aic7xxx_old.c @@ -229,7 +229,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/amiga7xx.c b/drivers/scsi/amiga7xx.c index 9099d53..d5d3c4d 100644 --- a/drivers/scsi/amiga7xx.c +++ b/drivers/scsi/amiga7xx.c @@ -10,7 +10,6 @@ #include #include #include -#include #include #include diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c index 9cf902b..eceacf6 100644 --- a/drivers/scsi/arm/acornscsi.c +++ b/drivers/scsi/arm/acornscsi.c @@ -131,7 +131,6 @@ #include #include -#include #include #include #include diff --git a/drivers/scsi/arm/arxescsi.c b/drivers/scsi/arm/arxescsi.c index 4385e9e..7e132c5 100644 --- a/drivers/scsi/arm/arxescsi.c +++ b/drivers/scsi/arm/arxescsi.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/arm/cumana_1.c b/drivers/scsi/arm/cumana_1.c index 3bdfc36..cf9a21c 100644 --- a/drivers/scsi/arm/cumana_1.c +++ b/drivers/scsi/arm/cumana_1.c @@ -5,7 +5,6 @@ */ #include #include -#include #include #include #include diff --git a/drivers/scsi/arm/cumana_2.c b/drivers/scsi/arm/cumana_2.c index 19edd9c..d2d51dc 100644 --- a/drivers/scsi/arm/cumana_2.c +++ b/drivers/scsi/arm/cumana_2.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/arm/ecoscsi.c b/drivers/scsi/arm/ecoscsi.c index 6adcccb..378e7af 100644 --- a/drivers/scsi/arm/ecoscsi.c +++ b/drivers/scsi/arm/ecoscsi.c @@ -23,7 +23,6 @@ #include #include -#include #include #include #include diff --git a/drivers/scsi/arm/eesox.c b/drivers/scsi/arm/eesox.c index 3f876fb..4677152 100644 --- a/drivers/scsi/arm/eesox.c +++ b/drivers/scsi/arm/eesox.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c index e05f0c2..2969cc0 100644 --- a/drivers/scsi/arm/fas216.c +++ b/drivers/scsi/arm/fas216.c @@ -39,7 +39,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/arm/oak.c b/drivers/scsi/arm/oak.c index d806b02..c21b839 100644 --- a/drivers/scsi/arm/oak.c +++ b/drivers/scsi/arm/oak.c @@ -6,7 +6,6 @@ #include #include -#include #include #include #include diff --git a/drivers/scsi/arm/powertec.c b/drivers/scsi/arm/powertec.c index ce159c1..f9cd20b 100644 --- a/drivers/scsi/arm/powertec.c +++ b/drivers/scsi/arm/powertec.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/atari_scsi.c b/drivers/scsi/atari_scsi.c index dfb1bcf..642de7b 100644 --- a/drivers/scsi/atari_scsi.c +++ b/drivers/scsi/atari_scsi.c @@ -86,7 +86,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/bvme6000.c b/drivers/scsi/bvme6000.c index 2958b8c..599b400 100644 --- a/drivers/scsi/bvme6000.c +++ b/drivers/scsi/bvme6000.c @@ -6,7 +6,6 @@ #include #include #include -#include #include #include diff --git a/drivers/scsi/ch.c b/drivers/scsi/ch.c index d02759f..2a2cc6c 100644 --- a/drivers/scsi/ch.c +++ b/drivers/scsi/ch.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/dtc.c b/drivers/scsi/dtc.c index 5475672..9d52e45 100644 --- a/drivers/scsi/dtc.c +++ b/drivers/scsi/dtc.c @@ -75,7 +75,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/eata_pio.c b/drivers/scsi/eata_pio.c index 2dbb66d..f33ad01 100644 --- a/drivers/scsi/eata_pio.c +++ b/drivers/scsi/eata_pio.c @@ -48,7 +48,6 @@ #include #include -#include #include #include #include diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c index cdd893b..880f70d 100644 --- a/drivers/scsi/g_NCR5380.c +++ b/drivers/scsi/g_NCR5380.c @@ -103,7 +103,6 @@ #include #include #include -#include #include #include "scsi.h" #include diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c index a199292..8c81cec 100644 --- a/drivers/scsi/gdth.c +++ b/drivers/scsi/gdth.c @@ -387,7 +387,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/gvp11.c b/drivers/scsi/gvp11.c index 2f6c113..37741e9 100644 --- a/drivers/scsi/gvp11.c +++ b/drivers/scsi/gvp11.c @@ -1,7 +1,6 @@ #include #include #include -#include #include #include diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c index d561663..7e7635c 100644 --- a/drivers/scsi/initio.c +++ b/drivers/scsi/initio.c @@ -123,7 +123,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/lasi700.c b/drivers/scsi/lasi700.c index 2aae1b0..5c32a69 100644 --- a/drivers/scsi/lasi700.c +++ b/drivers/scsi/lasi700.c @@ -38,7 +38,6 @@ #include #include #include -#include #include #include diff --git a/drivers/scsi/mac_scsi.c b/drivers/scsi/mac_scsi.c index a942a21..cdbcaa5 100644 --- a/drivers/scsi/mac_scsi.c +++ b/drivers/scsi/mac_scsi.c @@ -36,7 +36,6 @@ #include #include -#include #include #include #include diff --git a/drivers/scsi/mvme147.c b/drivers/scsi/mvme147.c index 1ddd7a1..be41aad 100644 --- a/drivers/scsi/mvme147.c +++ b/drivers/scsi/mvme147.c @@ -1,7 +1,6 @@ #include #include #include -#include #include #include diff --git a/drivers/scsi/mvme16x.c b/drivers/scsi/mvme16x.c index 890e9e2..575fe6f 100644 --- a/drivers/scsi/mvme16x.c +++ b/drivers/scsi/mvme16x.c @@ -6,7 +6,6 @@ #include #include #include -#include #include #include diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c index 7c13f6f..f6f561d 100644 --- a/drivers/scsi/nsp32.c +++ b/drivers/scsi/nsp32.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/pas16.c b/drivers/scsi/pas16.c index 1434209..ee59656 100644 --- a/drivers/scsi/pas16.c +++ b/drivers/scsi/pas16.c @@ -116,7 +116,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c index aad362b..370802d 100644 --- a/drivers/scsi/pcmcia/aha152x_stub.c +++ b/drivers/scsi/pcmcia/aha152x_stub.c @@ -37,7 +37,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c index a1c5f26..4b82b20 100644 --- a/drivers/scsi/pcmcia/fdomain_stub.c +++ b/drivers/scsi/pcmcia/fdomain_stub.c @@ -34,7 +34,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index e16fe36..c6f8c6e 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -31,7 +31,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c index 9d431fe..697cfb7 100644 --- a/drivers/scsi/pcmcia/qlogic_stub.c +++ b/drivers/scsi/pcmcia/qlogic_stub.c @@ -34,7 +34,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c index 5b458d2..ffe75c4 100644 --- a/drivers/scsi/pcmcia/sym53c500_cs.c +++ b/drivers/scsi/pcmcia/sym53c500_cs.c @@ -54,7 +54,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c index 1548d42..6777e8a 100644 --- a/drivers/scsi/qla1280.c +++ b/drivers/scsi/qla1280.c @@ -341,7 +341,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index f33e2eb..1c89ee3 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -40,7 +40,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index 5adbbee..3e2930b 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -28,7 +28,6 @@ #include #include -#include #include #include #include diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 3571ce8..0d3c10f 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -26,7 +26,6 @@ */ #include #include -#include /* workqueue stuff, HZ */ #include #include #include diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index b781a90..3f048bd 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -35,7 +35,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index 89e9b36..1857d68 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -35,7 +35,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/sr_ioctl.c b/drivers/scsi/sr_ioctl.c index 0578ba4..e1589f9 100644 --- a/drivers/scsi/sr_ioctl.c +++ b/drivers/scsi/sr_ioctl.c @@ -1,5 +1,4 @@ #include -#include #include #include #include diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c index ba6bcda..69be132 100644 --- a/drivers/scsi/stex.c +++ b/drivers/scsi/stex.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/sun3_scsi.c b/drivers/scsi/sun3_scsi.c index 69ee3e4..5e46d84 100644 --- a/drivers/scsi/sun3_scsi.c +++ b/drivers/scsi/sun3_scsi.c @@ -58,7 +58,6 @@ #include #include -#include #include #include #include diff --git a/drivers/scsi/sun3_scsi_vme.c b/drivers/scsi/sun3_scsi_vme.c index bb0c9fd9..7cb4a31 100644 --- a/drivers/scsi/sun3_scsi_vme.c +++ b/drivers/scsi/sun3_scsi_vme.c @@ -20,7 +20,6 @@ #include #include -#include #include #include #include diff --git a/drivers/scsi/sym53c416.c b/drivers/scsi/sym53c416.c index 32c883f..2ca9505 100644 --- a/drivers/scsi/sym53c416.c +++ b/drivers/scsi/sym53c416.c @@ -32,7 +32,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/t128.c b/drivers/scsi/t128.c index 0b7a70f..248d60b 100644 --- a/drivers/scsi/t128.c +++ b/drivers/scsi/t128.c @@ -108,7 +108,6 @@ #include #include -#include #include #include #include diff --git a/drivers/scsi/tmscsim.c b/drivers/scsi/tmscsim.c index fa5382e..a583e89 100644 --- a/drivers/scsi/tmscsim.c +++ b/drivers/scsi/tmscsim.c @@ -221,7 +221,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/wd33c93.c b/drivers/scsi/wd33c93.c index 2083454..8357516 100644 --- a/drivers/scsi/wd33c93.c +++ b/drivers/scsi/wd33c93.c @@ -73,7 +73,6 @@ #include -#include #include #include #include diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 2989228..6d7d616 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c index 1c4c381..41431d0 100644 --- a/drivers/serial/icom.c +++ b/drivers/serial/icom.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c index c475f22..c3abfb3 100644 --- a/drivers/serial/ip22zilog.c +++ b/drivers/serial/ip22zilog.c @@ -14,7 +14,6 @@ */ #include #include -#include #include #include #include diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index 10baa2c..c2f1012 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -35,7 +35,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index 145d623..deb9ab4 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -17,7 +17,6 @@ #include #include -#include #include #include #include diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index 3ec3df2..96a852a 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -17,7 +17,6 @@ #include #include -#include #include #include #include diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c index 244f796..da73205 100644 --- a/drivers/serial/sunzilog.c +++ b/drivers/serial/sunzilog.c @@ -14,7 +14,6 @@ #include #include -#include #include #include #include diff --git a/drivers/tc/lk201.c b/drivers/tc/lk201.c index 757dec9..a90c255 100644 --- a/drivers/tc/lk201.c +++ b/drivers/tc/lk201.c @@ -10,7 +10,6 @@ #include -#include #include #include #include diff --git a/drivers/telephony/ixj_pcmcia.c b/drivers/telephony/ixj_pcmcia.c index 164a5dc..3e658dc 100644 --- a/drivers/telephony/ixj_pcmcia.c +++ b/drivers/telephony/ixj_pcmcia.c @@ -3,7 +3,6 @@ #include #include -#include #include /* printk() */ #include /* everything... */ #include /* error codes */ diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index f390501..36b36e0 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -30,7 +30,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 3c2bc07..7d7909c 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -40,7 +40,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 22e3c94..04e6b85 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c index e873cf4..7b3a326 100644 --- a/drivers/usb/gadget/goku_udc.c +++ b/drivers/usb/gadget/goku_udc.c @@ -29,7 +29,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index 7617ff7..49d7377 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -53,7 +53,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index 1401043..8f9a2b6 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -28,7 +28,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index 0d22536..2966bba 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -33,7 +33,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c index 6c742a9..e6c19aa 100644 --- a/drivers/usb/gadget/serial.c +++ b/drivers/usb/gadget/serial.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index ebe04e0..8c85e33 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -66,7 +66,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/usb/host/hc_crisv10.c b/drivers/usb/host/hc_crisv10.c index f0ffb89..32f7caf 100644 --- a/drivers/usb/host/hc_crisv10.c +++ b/drivers/usb/host/hc_crisv10.c @@ -7,7 +7,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index ac9f11d..2d0e73b 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 49b9d39..ded4df3 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -28,7 +28,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c index 8ccddf7..896cb2b 100644 --- a/drivers/usb/image/microtek.c +++ b/drivers/usb/image/microtek.c @@ -121,7 +121,6 @@ #include #include -#include #include #include #include diff --git a/drivers/usb/input/aiptek.c b/drivers/usb/input/aiptek.c index 9f52429..f857935 100644 --- a/drivers/usb/input/aiptek.c +++ b/drivers/usb/input/aiptek.c @@ -76,7 +76,6 @@ #include #include #include -#include #include #include diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index 84983d1..4d8ed3d 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/usb/input/hid-pidff.c b/drivers/usb/input/hid-pidff.c index cbd2d53..f5a90e9 100644 --- a/drivers/usb/input/hid-pidff.c +++ b/drivers/usb/input/hid-pidff.c @@ -24,7 +24,6 @@ #define debug(format, arg...) pr_debug("hid-pidff: " format "\n" , ## arg) -#include #include #include diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 0398908..6f8b134 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -40,7 +40,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/usb/misc/sisusbvga/sisusb_con.c b/drivers/usb/misc/sisusbvga/sisusb_con.c index 9148694..1730d86 100644 --- a/drivers/usb/misc/sisusbvga/sisusb_con.c +++ b/drivers/usb/misc/sisusbvga/sisusb_con.c @@ -51,7 +51,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c index 4206df2..bd357e1 100644 --- a/drivers/usb/net/asix.c +++ b/drivers/usb/net/asix.c @@ -25,7 +25,6 @@ #include #include -#include #include #include #include diff --git a/drivers/usb/net/cdc_ether.c b/drivers/usb/net/cdc_ether.c index e5cdafa..5a21f06 100644 --- a/drivers/usb/net/cdc_ether.c +++ b/drivers/usb/net/cdc_ether.c @@ -22,7 +22,6 @@ // #define VERBOSE // more; success messages #include -#include #include #include #include diff --git a/drivers/usb/net/cdc_subset.c b/drivers/usb/net/cdc_subset.c index e2fae85..ae8fb06 100644 --- a/drivers/usb/net/cdc_subset.c +++ b/drivers/usb/net/cdc_subset.c @@ -19,7 +19,6 @@ #include #include -#include #include #include #include diff --git a/drivers/usb/net/gl620a.c b/drivers/usb/net/gl620a.c index 31e5fe3..d257a8e 100644 --- a/drivers/usb/net/gl620a.c +++ b/drivers/usb/net/gl620a.c @@ -22,7 +22,6 @@ // #define VERBOSE // more; success messages #include -#include #include #include #include diff --git a/drivers/usb/net/kaweth.c b/drivers/usb/net/kaweth.c index 36a9891..de95268 100644 --- a/drivers/usb/net/kaweth.c +++ b/drivers/usb/net/kaweth.c @@ -46,7 +46,6 @@ */ #include -#include #include #include #include diff --git a/drivers/usb/net/net1080.c b/drivers/usb/net/net1080.c index 4936359..ccebfde 100644 --- a/drivers/usb/net/net1080.c +++ b/drivers/usb/net/net1080.c @@ -21,7 +21,6 @@ // #define VERBOSE // more; success messages #include -#include #include #include #include diff --git a/drivers/usb/net/plusb.c b/drivers/usb/net/plusb.c index 5d17cdf..4530093 100644 --- a/drivers/usb/net/plusb.c +++ b/drivers/usb/net/plusb.c @@ -21,7 +21,6 @@ // #define VERBOSE // more; success messages #include -#include #include #include #include diff --git a/drivers/usb/net/rndis_host.c b/drivers/usb/net/rndis_host.c index be888d2..39a21c7 100644 --- a/drivers/usb/net/rndis_host.c +++ b/drivers/usb/net/rndis_host.c @@ -21,7 +21,6 @@ // #define VERBOSE // more; success messages #include -#include #include #include #include diff --git a/drivers/usb/net/rtl8150.c b/drivers/usb/net/rtl8150.c index 670262a..ea153dc 100644 --- a/drivers/usb/net/rtl8150.c +++ b/drivers/usb/net/rtl8150.c @@ -6,7 +6,6 @@ * version 2 as published by the Free Software Foundation. */ -#include #include #include #include diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c index 6e39e99..43ba61a 100644 --- a/drivers/usb/net/usbnet.c +++ b/drivers/usb/net/usbnet.c @@ -34,7 +34,6 @@ // #define VERBOSE // more; success messages #include -#include #include #include #include diff --git a/drivers/usb/net/zaurus.c b/drivers/usb/net/zaurus.c index 144566b..9f98e8c 100644 --- a/drivers/usb/net/zaurus.c +++ b/drivers/usb/net/zaurus.c @@ -21,7 +21,6 @@ // #define VERBOSE // more; success messages #include -#include #include #include #include diff --git a/drivers/usb/storage/datafab.c b/drivers/usb/storage/datafab.c index 01d8971..c87ad1b 100644 --- a/drivers/usb/storage/datafab.c +++ b/drivers/usb/storage/datafab.c @@ -50,7 +50,6 @@ * in that routine. */ -#include #include #include diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c index 5b06f92..3a41740 100644 --- a/drivers/usb/storage/initializers.c +++ b/drivers/usb/storage/initializers.c @@ -37,7 +37,6 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include #include #include "usb.h" diff --git a/drivers/usb/storage/jumpshot.c b/drivers/usb/storage/jumpshot.c index 5031aa9..003fcf5 100644 --- a/drivers/usb/storage/jumpshot.c +++ b/drivers/usb/storage/jumpshot.c @@ -47,7 +47,6 @@ * in that routine. */ -#include #include #include diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c index e3528ec..b2ed2a3 100644 --- a/drivers/usb/storage/sddr09.c +++ b/drivers/usb/storage/sddr09.c @@ -41,7 +41,6 @@ * EF: compute checksum (?) */ -#include #include #include diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c index 8fcec01..5e27297 100644 --- a/drivers/usb/storage/shuttle_usbat.c +++ b/drivers/usb/storage/shuttle_usbat.c @@ -43,7 +43,6 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include #include #include #include diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c index 602db66..bffe2b9 100644 --- a/drivers/video/atafb.c +++ b/drivers/video/atafb.c @@ -49,7 +49,6 @@ #include #include -#include #include #include #include diff --git a/drivers/video/aty/mach64_accel.c b/drivers/video/aty/mach64_accel.c index 1490e5e..a8f60c3 100644 --- a/drivers/video/aty/mach64_accel.c +++ b/drivers/video/aty/mach64_accel.c @@ -3,7 +3,6 @@ * ATI Mach64 Hardware Acceleration */ -#include #include #include #include