From 9b71dbd3c44c29665f1af5b9bb2ba8bc056a83a7 Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Tue, 31 Mar 2009 08:05:50 -0400 Subject: powerpc: Make LOWMEM_CAM_NUM depend on FSL_BOOKE The recent addition of CONFIG_LOWMEM_CAM_BOOL and CONFIG_LOWMEM_CAM_NUM cause the latter to show up in configs that do not need it during 'make oldconfig'. Make LOWMEM_CAM_NUM depend on FSL_BOOKE. Signed-off-by: Josh Boyer Signed-off-by: Kumar Gala diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index ad6b1c0..7d1a535 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -772,6 +772,7 @@ config LOWMEM_CAM_NUM_BOOL Say N here unless you know what you are doing. config LOWMEM_CAM_NUM + depends on FSL_BOOKE int "Number of CAMs to use to map low memory" if LOWMEM_CAM_NUM_BOOL default 3 -- cgit v0.10.2 From 9310933c832719b095f82dab30c6bf4e75e937ee Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Sat, 28 Mar 2009 15:07:16 -0600 Subject: powerpc: Remove unused symbols from fsl_devices.h Remove old artifacts leftover from the platform driver gianfar and fsl_i2c drivers. These symbols became unused when the drivers were migrated over to use the of_platform bus. Signed-off-by: Grant Likely Signed-off-by: Kumar Gala diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index d9051d7..4953709 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -18,7 +18,6 @@ #define _FSL_DEVICE_H_ #include -#include /* * Some conventions on how we handle peripherals on Freescale chips @@ -44,27 +43,6 @@ * */ -struct gianfar_platform_data { - /* device specific information */ - u32 device_flags; - char bus_id[BUS_ID_SIZE]; - phy_interface_t interface; -}; - -struct gianfar_mdio_data { - /* board specific information */ - int irq[32]; -}; - -/* Flags in gianfar_platform_data */ -#define FSL_GIANFAR_BRD_HAS_PHY_INTR 0x00000001 /* set or use a timer */ -#define FSL_GIANFAR_BRD_IS_REDUCED 0x00000002 /* Set if RGMII, RMII */ - -struct fsl_i2c_platform_data { - /* device specific information */ - u32 device_flags; -}; - /* Flags related to I2C device features */ #define FSL_I2C_DEV_SEPARATE_DFSRR 0x00000001 #define FSL_I2C_DEV_CLOCK_5200 0x00000002 -- cgit v0.10.2 From fe671772ab1bf5624f2c4dbe2295e6ebeb8055fc Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 31 Mar 2009 08:46:25 -0500 Subject: powerpc/85xx: Use fsl,mpc85.. as prefix for memory ctrl & l2-cache nodes Older devices tree's used "fsl,85.." instead of the preferred "fsl,mpc85.." for the memory controller & l2 cache controller nodes. The EDAC code is the only use of these and has been updated for some time to support both "fsl,85.." and "fsl,mpc85.." Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts index 308fe7c..c9cfd37 100644 --- a/arch/powerpc/boot/dts/ksi8560.dts +++ b/arch/powerpc/boot/dts/ksi8560.dts @@ -57,14 +57,14 @@ bus-frequency = <0>; /* Fixed by bootwrapper */ memory-controller@2000 { - compatible = "fsl,8540-memory-controller"; + compatible = "fsl,mpc8540-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <0x12 0x2>; }; L2: l2-cache-controller@20000 { - compatible = "fsl,8540-l2-cache-controller"; + compatible = "fsl,mpc8540-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <0x20>; /* 32 bytes */ cache-size = <0x40000>; /* L2, 256K */ diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts index 9c5079f..b1f1416 100644 --- a/arch/powerpc/boot/dts/sbc8548.dts +++ b/arch/powerpc/boot/dts/sbc8548.dts @@ -156,14 +156,14 @@ compatible = "simple-bus"; memory-controller@2000 { - compatible = "fsl,8548-memory-controller"; + compatible = "fsl,mpc8548-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <0x12 0x2>; }; L2: l2-cache-controller@20000 { - compatible = "fsl,8548-l2-cache-controller"; + compatible = "fsl,mpc8548-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <0x20>; // 32 bytes cache-size = <0x80000>; // L2, 512K diff --git a/arch/powerpc/boot/dts/sbc8560.dts b/arch/powerpc/boot/dts/sbc8560.dts index b772405..c4564b8 100644 --- a/arch/powerpc/boot/dts/sbc8560.dts +++ b/arch/powerpc/boot/dts/sbc8560.dts @@ -61,14 +61,14 @@ clock-frequency = <0>; memory-controller@2000 { - compatible = "fsl,8560-memory-controller"; + compatible = "fsl,mpc8560-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <0x12 0x2>; }; L2: l2-cache-controller@20000 { - compatible = "fsl,8560-l2-cache-controller"; + compatible = "fsl,mpc8560-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <0x20>; // 32 bytes cache-size = <0x40000>; // L2, 256K diff --git a/arch/powerpc/boot/dts/stx_gp3_8560.dts b/arch/powerpc/boot/dts/stx_gp3_8560.dts index 8b17395..ea6b151 100644 --- a/arch/powerpc/boot/dts/stx_gp3_8560.dts +++ b/arch/powerpc/boot/dts/stx_gp3_8560.dts @@ -57,14 +57,14 @@ compatible = "fsl,mpc8560-immr", "simple-bus"; memory-controller@2000 { - compatible = "fsl,8540-memory-controller"; + compatible = "fsl,mpc8540-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <18 2>; }; L2: l2-cache-controller@20000 { - compatible = "fsl,8540-l2-cache-controller"; + compatible = "fsl,mpc8540-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <32>; cache-size = <0x40000>; // L2, 256K diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts index ac9413a..231bae7 100644 --- a/arch/powerpc/boot/dts/tqm8540.dts +++ b/arch/powerpc/boot/dts/tqm8540.dts @@ -59,14 +59,14 @@ compatible = "fsl,mpc8540-immr", "simple-bus"; memory-controller@2000 { - compatible = "fsl,8540-memory-controller"; + compatible = "fsl,mpc8540-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <18 2>; }; L2: l2-cache-controller@20000 { - compatible = "fsl,8540-l2-cache-controller"; + compatible = "fsl,mpc8540-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <32>; cache-size = <0x40000>; // L2, 256K diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts index c71bb5d..4356a1f 100644 --- a/arch/powerpc/boot/dts/tqm8541.dts +++ b/arch/powerpc/boot/dts/tqm8541.dts @@ -58,14 +58,14 @@ compatible = "fsl,mpc8541-immr", "simple-bus"; memory-controller@2000 { - compatible = "fsl,8540-memory-controller"; + compatible = "fsl,mpc8540-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <18 2>; }; L2: l2-cache-controller@20000 { - compatible = "fsl,8540-l2-cache-controller"; + compatible = "fsl,mpc8540-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <32>; cache-size = <0x40000>; // L2, 256K diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts index a133ded..06d366e 100644 --- a/arch/powerpc/boot/dts/tqm8555.dts +++ b/arch/powerpc/boot/dts/tqm8555.dts @@ -58,14 +58,14 @@ compatible = "fsl,mpc8555-immr", "simple-bus"; memory-controller@2000 { - compatible = "fsl,8540-memory-controller"; + compatible = "fsl,mpc8540-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <18 2>; }; L2: l2-cache-controller@20000 { - compatible = "fsl,8540-l2-cache-controller"; + compatible = "fsl,mpc8540-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <32>; cache-size = <0x40000>; // L2, 256K diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts index 649e2e5..feff915 100644 --- a/arch/powerpc/boot/dts/tqm8560.dts +++ b/arch/powerpc/boot/dts/tqm8560.dts @@ -60,14 +60,14 @@ compatible = "fsl,mpc8560-immr", "simple-bus"; memory-controller@2000 { - compatible = "fsl,8540-memory-controller"; + compatible = "fsl,mpc8540-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <18 2>; }; L2: l2-cache-controller@20000 { - compatible = "fsl,8540-l2-cache-controller"; + compatible = "fsl,mpc8540-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <32>; cache-size = <0x40000>; // L2, 256K -- cgit v0.10.2 From 39fd09320b2d952c360b430c70846f8fa0244a51 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 1 Apr 2009 16:25:33 -0500 Subject: powerpc: Move SPEFSCR defines to common header SPEFSCR is a user space register and doesn't conflict with anything. Moving the defines of the various bit fields makes some emulation code have fewer ifdefs Signed-off-by: Kumar Gala diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index c9ff1ec..e8018d5 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -143,6 +143,36 @@ #define FPSCR_NI 0x00000004 /* FPU non IEEE-Mode */ #define FPSCR_RN 0x00000003 /* FPU rounding control */ +/* Bit definitions for SPEFSCR. */ +#define SPEFSCR_SOVH 0x80000000 /* Summary integer overflow high */ +#define SPEFSCR_OVH 0x40000000 /* Integer overflow high */ +#define SPEFSCR_FGH 0x20000000 /* Embedded FP guard bit high */ +#define SPEFSCR_FXH 0x10000000 /* Embedded FP sticky bit high */ +#define SPEFSCR_FINVH 0x08000000 /* Embedded FP invalid operation high */ +#define SPEFSCR_FDBZH 0x04000000 /* Embedded FP div by zero high */ +#define SPEFSCR_FUNFH 0x02000000 /* Embedded FP underflow high */ +#define SPEFSCR_FOVFH 0x01000000 /* Embedded FP overflow high */ +#define SPEFSCR_FINXS 0x00200000 /* Embedded FP inexact sticky */ +#define SPEFSCR_FINVS 0x00100000 /* Embedded FP invalid op. sticky */ +#define SPEFSCR_FDBZS 0x00080000 /* Embedded FP div by zero sticky */ +#define SPEFSCR_FUNFS 0x00040000 /* Embedded FP underflow sticky */ +#define SPEFSCR_FOVFS 0x00020000 /* Embedded FP overflow sticky */ +#define SPEFSCR_MODE 0x00010000 /* Embedded FP mode */ +#define SPEFSCR_SOV 0x00008000 /* Integer summary overflow */ +#define SPEFSCR_OV 0x00004000 /* Integer overflow */ +#define SPEFSCR_FG 0x00002000 /* Embedded FP guard bit */ +#define SPEFSCR_FX 0x00001000 /* Embedded FP sticky bit */ +#define SPEFSCR_FINV 0x00000800 /* Embedded FP invalid operation */ +#define SPEFSCR_FDBZ 0x00000400 /* Embedded FP div by zero */ +#define SPEFSCR_FUNF 0x00000200 /* Embedded FP underflow */ +#define SPEFSCR_FOVF 0x00000100 /* Embedded FP overflow */ +#define SPEFSCR_FINXE 0x00000040 /* Embedded FP inexact enable */ +#define SPEFSCR_FINVE 0x00000020 /* Embedded FP invalid op. enable */ +#define SPEFSCR_FDBZE 0x00000010 /* Embedded FP div by zero enable */ +#define SPEFSCR_FUNFE 0x00000008 /* Embedded FP underflow enable */ +#define SPEFSCR_FOVFE 0x00000004 /* Embedded FP overflow enable */ +#define SPEFSCR_FRMC 0x00000003 /* Embedded FP rounding mode control */ + /* Special Purpose Registers (SPRNs)*/ #define SPRN_CTR 0x009 /* Count Register */ #define SPRN_DSCR 0x11 diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index a56f4d61..601ddbc 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -423,36 +423,6 @@ #define SGR_NORMAL 0 /* Speculative fetching allowed. */ #define SGR_GUARDED 1 /* Speculative fetching disallowed. */ -/* Bit definitions for SPEFSCR. */ -#define SPEFSCR_SOVH 0x80000000 /* Summary integer overflow high */ -#define SPEFSCR_OVH 0x40000000 /* Integer overflow high */ -#define SPEFSCR_FGH 0x20000000 /* Embedded FP guard bit high */ -#define SPEFSCR_FXH 0x10000000 /* Embedded FP sticky bit high */ -#define SPEFSCR_FINVH 0x08000000 /* Embedded FP invalid operation high */ -#define SPEFSCR_FDBZH 0x04000000 /* Embedded FP div by zero high */ -#define SPEFSCR_FUNFH 0x02000000 /* Embedded FP underflow high */ -#define SPEFSCR_FOVFH 0x01000000 /* Embedded FP overflow high */ -#define SPEFSCR_FINXS 0x00200000 /* Embedded FP inexact sticky */ -#define SPEFSCR_FINVS 0x00100000 /* Embedded FP invalid op. sticky */ -#define SPEFSCR_FDBZS 0x00080000 /* Embedded FP div by zero sticky */ -#define SPEFSCR_FUNFS 0x00040000 /* Embedded FP underflow sticky */ -#define SPEFSCR_FOVFS 0x00020000 /* Embedded FP overflow sticky */ -#define SPEFSCR_MODE 0x00010000 /* Embedded FP mode */ -#define SPEFSCR_SOV 0x00008000 /* Integer summary overflow */ -#define SPEFSCR_OV 0x00004000 /* Integer overflow */ -#define SPEFSCR_FG 0x00002000 /* Embedded FP guard bit */ -#define SPEFSCR_FX 0x00001000 /* Embedded FP sticky bit */ -#define SPEFSCR_FINV 0x00000800 /* Embedded FP invalid operation */ -#define SPEFSCR_FDBZ 0x00000400 /* Embedded FP div by zero */ -#define SPEFSCR_FUNF 0x00000200 /* Embedded FP underflow */ -#define SPEFSCR_FOVF 0x00000100 /* Embedded FP overflow */ -#define SPEFSCR_FINXE 0x00000040 /* Embedded FP inexact enable */ -#define SPEFSCR_FINVE 0x00000020 /* Embedded FP invalid op. enable */ -#define SPEFSCR_FDBZE 0x00000010 /* Embedded FP div by zero enable */ -#define SPEFSCR_FUNFE 0x00000008 /* Embedded FP underflow enable */ -#define SPEFSCR_FOVFE 0x00000004 /* Embedded FP overflow enable */ -#define SPEFSCR_FRMC 0x00000003 /* Embedded FP rounding mode control */ - /* * The IBM-403 is an even more odd special case, as it is much * older than the IBM-405 series. We put these down here incase someone -- cgit v0.10.2 From 212f8c6d67634b133b2bc816e4aa6ca82fbd334c Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Thu, 2 Apr 2009 20:50:56 +0200 Subject: powerpc/85xx: Re-add the device_type soc to socrates.dts The device_type "soc" is still required for MPC85xx boards. Signed-off-by: Wolfgang Grandegger Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/socrates.dts b/arch/powerpc/boot/dts/socrates.dts index b8d0fc6..04c3988 100644 --- a/arch/powerpc/boot/dts/socrates.dts +++ b/arch/powerpc/boot/dts/socrates.dts @@ -52,6 +52,7 @@ soc8544@e0000000 { #address-cells = <1>; #size-cells = <1>; + device_type = "soc"; ranges = <0x00000000 0xe0000000 0x00100000>; reg = <0xe0000000 0x00001000>; // CCSRBAR 1M -- cgit v0.10.2 From e60f57f50f861f29052e0e3563ac453da53f2181 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 2 Apr 2009 16:17:36 -0500 Subject: powerpc/math-emu: Change types to work on ppc64 While normally we don't use the math emulation code on ppc64 it can be useful for doing things like emulating the embedded FP instructions. Since performance isn't critical in this scenario its easier to keep the sizes of the various math-emu the same as on ppc32. Signed-off-by: Kumar Gala diff --git a/arch/powerpc/include/asm/sfp-machine.h b/arch/powerpc/include/asm/sfp-machine.h index 3d9f831..3a7a67a 100644 --- a/arch/powerpc/include/asm/sfp-machine.h +++ b/arch/powerpc/include/asm/sfp-machine.h @@ -29,9 +29,9 @@ /* basic word size definitions */ #define _FP_W_TYPE_SIZE 32 -#define _FP_W_TYPE unsigned long -#define _FP_WS_TYPE signed long -#define _FP_I_TYPE long +#define _FP_W_TYPE unsigned int +#define _FP_WS_TYPE signed int +#define _FP_I_TYPE int #define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2)) #define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1)) -- cgit v0.10.2 From d91e4ea7047d96733d763f1626f1f21ff4298cef Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 7 Jan 2009 15:53:29 -0600 Subject: powerpc: Add support for CoreInt delivery of interrupts on MPIC CoreInt provides a mechansim to deliver the IRQ vector directly into the core on an interrupt (via the SPR EPR) rather than having to go IACK on the PIC. This is suppose to provide an improvment in interrupt latency by reducing the time to get the IRQ vector. Signed-off-by: Kumar Gala diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h index c2ccca5..a002682 100644 --- a/arch/powerpc/include/asm/mpic.h +++ b/arch/powerpc/include/asm/mpic.h @@ -22,6 +22,14 @@ #define MPIC_GREG_FEATURE_1 0x00010 #define MPIC_GREG_GLOBAL_CONF_0 0x00020 #define MPIC_GREG_GCONF_RESET 0x80000000 +/* On the FSL mpic implementations the Mode field is expand to be + * 2 bits wide: + * 0b00 = pass through (interrupts routed to IRQ0) + * 0b01 = Mixed mode + * 0b10 = reserved + * 0b11 = External proxy / coreint + */ +#define MPIC_GREG_GCONF_COREINT 0x60000000 #define MPIC_GREG_GCONF_8259_PTHROU_DIS 0x20000000 #define MPIC_GREG_GCONF_NO_BIAS 0x10000000 #define MPIC_GREG_GCONF_BASE_MASK 0x000fffff @@ -357,6 +365,8 @@ struct mpic #define MPIC_BROKEN_FRR_NIRQS 0x00000800 /* Destination only supports a single CPU at a time */ #define MPIC_SINGLE_DEST_CPU 0x00001000 +/* Enable CoreInt delivery of interrupts */ +#define MPIC_ENABLE_COREINT 0x00002000 /* MPIC HW modification ID */ #define MPIC_REGSET_MASK 0xf0000000 @@ -470,6 +480,8 @@ extern void mpic_end_irq(unsigned int irq); extern unsigned int mpic_get_one_irq(struct mpic *mpic); /* This one gets from the primary mpic */ extern unsigned int mpic_get_irq(void); +/* This one gets from the primary mpic via CoreInt*/ +extern unsigned int mpic_get_coreint_irq(void); /* Fetch Machine Check interrupt from primary mpic */ extern unsigned int mpic_get_mcirq(void); diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 532e205..21b9567 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -1170,6 +1170,12 @@ struct mpic * __init mpic_alloc(struct device_node *node, mb(); } + /* CoreInt */ + if (flags & MPIC_ENABLE_COREINT) + mpic_write(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0), + mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0)) + | MPIC_GREG_GCONF_COREINT); + if (flags & MPIC_ENABLE_MCK) mpic_write(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0), mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0)) @@ -1525,6 +1531,34 @@ unsigned int mpic_get_irq(void) return mpic_get_one_irq(mpic); } +unsigned int mpic_get_coreint_irq(void) +{ +#ifdef CONFIG_BOOKE + struct mpic *mpic = mpic_primary; + u32 src; + + BUG_ON(mpic == NULL); + + src = mfspr(SPRN_EPR); + + if (unlikely(src == mpic->spurious_vec)) { + if (mpic->flags & MPIC_SPV_EOI) + mpic_eoi(mpic); + return NO_IRQ; + } + if (unlikely(mpic->protected && test_bit(src, mpic->protected))) { + if (printk_ratelimit()) + printk(KERN_WARNING "%s: Got protected source %d !\n", + mpic->name, (int)src); + return NO_IRQ; + } + + return irq_linear_revmap(mpic->irqhost, src); +#else + return NO_IRQ; +#endif +} + unsigned int mpic_get_mcirq(void) { struct mpic *mpic = mpic_primary; -- cgit v0.10.2 From bd86ef378412fc30282daf722a833f734e4e2236 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Fri, 3 Apr 2009 15:48:44 -0500 Subject: cpm_uart: Initialize port.dev before it's used. Previously, this caused NULL to sometimes be passed as a device to the DMA code. With recent DMA changes, that now causes a BUG(). Signed-off-by: Scott Wood Signed-off-by: Kumar Gala diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index 5c6ef51..4dd00be 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -1339,13 +1339,13 @@ static int __devinit cpm_uart_probe(struct of_device *ofdev, dev_set_drvdata(&ofdev->dev, pinfo); + /* initialize the device pointer for the port */ + pinfo->port.dev = &ofdev->dev; + ret = cpm_uart_init_port(ofdev->node, pinfo); if (ret) return ret; - /* initialize the device pointer for the port */ - pinfo->port.dev = &ofdev->dev; - return uart_add_one_port(&cpm_reg, &pinfo->port); } -- cgit v0.10.2 From 4d8107f474029167ae69862bf6b2c7273be757c7 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Fri, 3 Apr 2009 16:15:49 -0500 Subject: cpm_uart: Disable CPM udbg when re-initing CPM uart, even if not the console. Previously, if udbg was using the CPM uart, and the normal CPM uart driver was enabled, but the console was directed elsewhere, udbg would not be stopped prior to initialization. This resulted in udbg hanging forever waiting for the CPM to process a descriptor. Signed-off-by: Scott Wood Signed-off-by: Kumar Gala diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index 4dd00be..f8df068 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -1106,6 +1106,10 @@ static int cpm_uart_init_port(struct device_node *np, for (i = 0; i < NUM_GPIOS; i++) pinfo->gpios[i] = of_get_gpio(np, i); +#ifdef CONFIG_PPC_EARLY_DEBUG_CPM + udbg_putc = NULL; +#endif + return cpm_uart_request_port(&pinfo->port); out_pram: @@ -1255,10 +1259,6 @@ static int __init cpm_uart_console_setup(struct console *co, char *options) baud = 9600; } -#ifdef CONFIG_PPC_EARLY_DEBUG_CPM - udbg_putc = NULL; -#endif - if (IS_SMC(pinfo)) { out_be16(&pinfo->smcup->smc_brkcr, 0); cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); -- cgit v0.10.2 From 65cc0fa3bde00e81f83348ef162a83ab9fff2079 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Fri, 3 Apr 2009 15:58:46 -0500 Subject: powerpc/pq2fads: Update device tree for use with device-tree-aware u-boot. Add aliases, and correct CS0 offset to match how u-boot programs it (this was not a problem with cuImage because the wrapper would reprogram the localbus to match the device tree). Signed-off-by: Scott Wood Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/pq2fads.dts b/arch/powerpc/boot/dts/pq2fads.dts index b2d6109..0bb6693 100644 --- a/arch/powerpc/boot/dts/pq2fads.dts +++ b/arch/powerpc/boot/dts/pq2fads.dts @@ -17,6 +17,14 @@ #address-cells = <1>; #size-cells = <1>; + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -45,7 +53,7 @@ #size-cells = <1>; reg = <0xf0010100 0x60>; - ranges = <0x0 0x0 0xfe000000 0x800000 + ranges = <0x0 0x0 0xff800000 0x800000 0x1 0x0 0xf4500000 0x8000 0x8 0x0 0xf8200000 0x8000>; @@ -71,7 +79,7 @@ }; }; - pci@f0010800 { + pci0: pci@f0010800 { device_type = "pci"; reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>; compatible = "fsl,mpc8280-pci", "fsl,pq2-pci"; @@ -142,7 +150,7 @@ reg = <0x119f0 0x10 0x115f0 0x10>; }; - serial@11a00 { + serial0: serial@11a00 { device_type = "serial"; compatible = "fsl,mpc8280-scc-uart", "fsl,cpm2-scc-uart"; @@ -153,7 +161,7 @@ fsl,cpm-command = <0x800000>; }; - serial@11a20 { + serial1: serial@11a20 { device_type = "serial"; compatible = "fsl,mpc8280-scc-uart", "fsl,cpm2-scc-uart"; @@ -164,7 +172,7 @@ fsl,cpm-command = <0x4a00000>; }; - ethernet@11320 { + enet0: ethernet@11320 { device_type = "network"; compatible = "fsl,mpc8280-fcc-enet", "fsl,cpm2-fcc-enet"; @@ -176,7 +184,7 @@ fsl,cpm-command = <0x16200300>; }; - ethernet@11340 { + enet1: ethernet@11340 { device_type = "network"; compatible = "fsl,mpc8280-fcc-enet", "fsl,cpm2-fcc-enet"; -- cgit v0.10.2 From f379188958ae8af30105eb1f27d0e0abf6a51558 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Sat, 4 Apr 2009 22:31:20 +0400 Subject: fsl-diu-fb: Pass the proper device for dma mapping routines The driver should pass a device that specifies internal DMA ops, but currently NULL pointers are passed, and thus following bug pops up: Freescale DIU driver ------------[ cut here ]------------ kernel BUG at arch/powerpc/include/asm/dma-mapping.h:237! Oops: Exception in kernel mode, sig: 5 [#1] ... NIP [c01658b4] allocate_buf+0x0/0x8 LR [c0306554] fsl_diu_probe+0x2b4/0x518 Call Trace: [df02be10] [c030638c] fsl_diu_probe+0xec/0x518 (unreliable) [df02be60] [c020cdec] of_platform_device_probe+0x5c/0x84 [df02be80] [c018f5d0] really_probe+0x78/0x1a0 [df02bea0] [c018f7c0] __driver_attach+0xa4/0xa8 [df02bec0] [c018ea00] bus_for_each_dev+0x60/0x9c [df02bef0] [c018f414] driver_attach+0x24/0x34 [df02bf00] [c018f168] bus_add_driver+0x12c/0x1cc [df02bf20] [c018fbdc] driver_register+0x6c/0x110 [df02bf30] [c020ccb4] of_register_driver+0x54/0x70 [df02bf40] [c03d0a50] fsl_diu_init+0x70/0xa4 ... This patch fixes the issue. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c index fb51197..f153c58 100644 --- a/drivers/video/fsl-diu-fb.c +++ b/drivers/video/fsl-diu-fb.c @@ -1352,14 +1352,15 @@ static int fsl_diu_resume(struct of_device *ofdev) #endif /* CONFIG_PM */ /* Align to 64-bit(8-byte), 32-byte, etc. */ -static int allocate_buf(struct diu_addr *buf, u32 size, u32 bytes_align) +static int allocate_buf(struct device *dev, struct diu_addr *buf, u32 size, + u32 bytes_align) { u32 offset, ssize; u32 mask; dma_addr_t paddr = 0; ssize = size + bytes_align; - buf->vaddr = dma_alloc_coherent(NULL, ssize, &paddr, GFP_DMA | + buf->vaddr = dma_alloc_coherent(dev, ssize, &paddr, GFP_DMA | __GFP_ZERO); if (!buf->vaddr) return -ENOMEM; @@ -1376,9 +1377,10 @@ static int allocate_buf(struct diu_addr *buf, u32 size, u32 bytes_align) return 0; } -static void free_buf(struct diu_addr *buf, u32 size, u32 bytes_align) +static void free_buf(struct device *dev, struct diu_addr *buf, u32 size, + u32 bytes_align) { - dma_free_coherent(NULL, size + bytes_align, + dma_free_coherent(dev, size + bytes_align, buf->vaddr, (buf->paddr - buf->offset)); return; } @@ -1476,17 +1478,19 @@ static int __devinit fsl_diu_probe(struct of_device *ofdev, machine_data->monitor_port = monitor_port; /* Area descriptor memory pool aligns to 64-bit boundary */ - if (allocate_buf(&pool.ad, sizeof(struct diu_ad) * FSL_AOI_NUM, 8)) + if (allocate_buf(&ofdev->dev, &pool.ad, + sizeof(struct diu_ad) * FSL_AOI_NUM, 8)) return -ENOMEM; /* Get memory for Gamma Table - 32-byte aligned memory */ - if (allocate_buf(&pool.gamma, 768, 32)) { + if (allocate_buf(&ofdev->dev, &pool.gamma, 768, 32)) { ret = -ENOMEM; goto error; } /* For performance, cursor bitmap buffer aligns to 32-byte boundary */ - if (allocate_buf(&pool.cursor, MAX_CURS * MAX_CURS * 2, 32)) { + if (allocate_buf(&ofdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2, + 32)) { ret = -ENOMEM; goto error; } @@ -1554,11 +1558,13 @@ error: i > 0; i--) uninstall_fb(machine_data->fsl_diu_info[i - 1]); if (pool.ad.vaddr) - free_buf(&pool.ad, sizeof(struct diu_ad) * FSL_AOI_NUM, 8); + free_buf(&ofdev->dev, &pool.ad, + sizeof(struct diu_ad) * FSL_AOI_NUM, 8); if (pool.gamma.vaddr) - free_buf(&pool.gamma, 768, 32); + free_buf(&ofdev->dev, &pool.gamma, 768, 32); if (pool.cursor.vaddr) - free_buf(&pool.cursor, MAX_CURS * MAX_CURS * 2, 32); + free_buf(&ofdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2, + 32); if (machine_data->dummy_aoi_virt) fsl_diu_free(machine_data->dummy_aoi_virt, 64); iounmap(dr.diu_reg); @@ -1584,11 +1590,13 @@ static int fsl_diu_remove(struct of_device *ofdev) for (i = ARRAY_SIZE(machine_data->fsl_diu_info); i > 0; i--) uninstall_fb(machine_data->fsl_diu_info[i - 1]); if (pool.ad.vaddr) - free_buf(&pool.ad, sizeof(struct diu_ad) * FSL_AOI_NUM, 8); + free_buf(&ofdev->dev, &pool.ad, + sizeof(struct diu_ad) * FSL_AOI_NUM, 8); if (pool.gamma.vaddr) - free_buf(&pool.gamma, 768, 32); + free_buf(&ofdev->dev, &pool.gamma, 768, 32); if (pool.cursor.vaddr) - free_buf(&pool.cursor, MAX_CURS * MAX_CURS * 2, 32); + free_buf(&ofdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2, + 32); if (machine_data->dummy_aoi_virt) fsl_diu_free(machine_data->dummy_aoi_virt, 64); iounmap(dr.diu_reg); -- cgit v0.10.2 From b6966b1be568e83a48585369731f1123a6f85157 Mon Sep 17 00:00:00 2001 From: Mark Nelson Date: Mon, 23 Mar 2009 20:30:41 +0000 Subject: powerpc/wdrtas: Update wdrtas_get_interval to use rtas_data_buf The buffer passed to the ibm,get-system-parameter RTAS call must be in the RMA. To ensure we pass an address in the RMA use rtas_data_buf for the actual RTAS call and then copy the result to value. We can't just make it static because this can be compiled in as a module. Also add the WDRTAS_SP_SPI_LEN so we don't litter '4' throughout the function. Signed-off-by: Mark Nelson Tested-by: Adrian Reber Acked-by: Utz Bacher Signed-off-by: Paul Mackerras diff --git a/drivers/watchdog/wdrtas.c b/drivers/watchdog/wdrtas.c index 5d3b1a8..a38fa49 100644 --- a/drivers/watchdog/wdrtas.c +++ b/drivers/watchdog/wdrtas.c @@ -106,6 +106,8 @@ static int wdrtas_set_interval(int interval) return result; } +#define WDRTAS_SP_SPI_LEN 4 + /** * wdrtas_get_interval - returns the current watchdog interval * @fallback_value: value (in seconds) to use, if the RTAS call fails @@ -119,10 +121,17 @@ static int wdrtas_set_interval(int interval) static int wdrtas_get_interval(int fallback_value) { long result; - char value[4]; + char value[WDRTAS_SP_SPI_LEN]; + spin_lock(&rtas_data_buf_lock); + memset(rtas_data_buf, 0, WDRTAS_SP_SPI_LEN); result = rtas_call(wdrtas_token_get_sp, 3, 1, NULL, - WDRTAS_SP_SPI, (void *)__pa(&value), 4); + WDRTAS_SP_SPI, __pa(rtas_data_buf), + WDRTAS_SP_SPI_LEN); + + memcpy(value, rtas_data_buf, WDRTAS_SP_SPI_LEN); + spin_unlock(&rtas_data_buf_lock); + if (value[0] != 0 || value[1] != 2 || value[3] != 0 || result < 0) { printk(KERN_WARNING "wdrtas: could not get sp_spi watchdog " "timeout (%li). Continuing\n", result); -- cgit v0.10.2 From f08b7e9f551fa74219bf32df483fb95c58aad94b Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 30 Mar 2009 17:34:04 +0000 Subject: powerpc/pmac: Fix internal modem IRQ on Wallstreet PowerBook The (relatively) new pmac_zilog driver doesn't use the pre-munged IRQ numbers from the macio_dev unlike other macio things, it directly maps it off the OF device-tree. It does that because it can be initialized much earlier than the registration of the macio devices, in order to get a serial console early. Unfortunately, that means that it "misses" some fixups done by the macio layer to work around missing interrupt descriptions in the device-tree of the Wallstreet machines. This patch brings the necessary workaround into the pmac_zilog driver itself to bring it back to working condition. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c index ad34885..9c1243f 100644 --- a/drivers/serial/pmac_zilog.c +++ b/drivers/serial/pmac_zilog.c @@ -1538,6 +1538,21 @@ no_dma: uap->port.type = PORT_PMAC_ZILOG; uap->port.flags = 0; + /* + * Fixup for the port on Gatwick for which the device-tree has + * missing interrupts. Normally, the macio_dev would contain + * fixed up interrupt info, but we use the device-tree directly + * here due to early probing so we need the fixup too. + */ + if (uap->port.irq == NO_IRQ && + np->parent && np->parent->parent && + of_device_is_compatible(np->parent->parent, "gatwick")) { + /* IRQs on gatwick are offset by 64 */ + uap->port.irq = irq_create_mapping(NULL, 64 + 15); + uap->tx_dma_irq = irq_create_mapping(NULL, 64 + 4); + uap->rx_dma_irq = irq_create_mapping(NULL, 64 + 5); + } + /* Setup some valid baud rate information in the register * shadows so we don't write crap there before baud rate is * first initialized. -- cgit v0.10.2 From 85701e6ac1b75d983610c24cfdaafdaaf56cfbb2 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Tue, 31 Mar 2009 02:41:18 +0000 Subject: powerpc: Remove duplicated #include's Remove duplicated #include's in - arch/powerpc/include/asm/ps3fb.h - arch/powerpc/kernel/setup-common.c Signed-off-by: Huang Weiyi Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/include/asm/ps3fb.h b/arch/powerpc/include/asm/ps3fb.h index 90dbefb..e7233a8 100644 --- a/arch/powerpc/include/asm/ps3fb.h +++ b/arch/powerpc/include/asm/ps3fb.h @@ -21,7 +21,6 @@ #include #include -#include /* ioctl */ #define PS3FB_IOCTL_SETMODE _IOW('r', 1, int) /* set video mode */ diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 9774f9f..02fed27 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -36,7 +36,6 @@ #include #include #include -#include #include #include #include -- cgit v0.10.2 From 4da727ae2aa62f134c79d38c41d15f50d912745f Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Tue, 31 Mar 2009 20:06:14 +0000 Subject: powerpc: Print progress of ibm,client-architecture method The ibm,client-architecture method will often cause a reconfiguration reboot. When this happens the last thing we see is: Hypertas detected, assuming LPAR ! Which doesn't explain what just happened. Wrap the ibm,client-architecture so it's clear what is going on: Calling ibm,client-architecture... done In order to maintain the law of conservation of screen real estate, downgrade two other messages to debug. Signed-off-by: Anton Blanchard Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 2e026c0..3248f83 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -732,15 +732,17 @@ static void __init prom_send_capabilities(void) root = call_prom("open", 1, 1, ADDR("/")); if (root != 0) { /* try calling the ibm,client-architecture-support method */ + prom_printf("Calling ibm,client-architecture..."); if (call_prom_ret("call-method", 3, 2, &ret, ADDR("ibm,client-architecture-support"), root, ADDR(ibm_architecture_vec)) == 0) { /* the call exists... */ if (ret) - prom_printf("WARNING: ibm,client-architecture" + prom_printf("\nWARNING: ibm,client-architecture" "-support call FAILED!\n"); call_prom("close", 1, 0, root); + prom_printf(" done\n"); return; } call_prom("close", 1, 0, root); @@ -1495,7 +1497,7 @@ static int __init prom_find_machine_type(void) return PLATFORM_GENERIC; x = prom_getproplen(rtas, "ibm,hypertas-functions"); if (x != PROM_ERROR) { - prom_printf("Hypertas detected, assuming LPAR !\n"); + prom_debug("Hypertas detected, assuming LPAR !\n"); return PLATFORM_PSERIES_LPAR; } return PLATFORM_PSERIES; @@ -1544,7 +1546,7 @@ static void __init prom_check_displays(void) }; const unsigned char *clut; - prom_printf("Looking for displays\n"); + prom_debug("Looking for displays\n"); for (node = 0; prom_next_node(&node); ) { memset(type, 0, sizeof(type)); prom_getprop(node, "device_type", type, sizeof(type)); -- cgit v0.10.2 From 1f8737aab39e15684bf6b6b53586b7c89a269f79 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Tue, 31 Mar 2009 20:06:15 +0000 Subject: powerpc: Clean up some prom printouts Make all messages consistent, some have spaces before the "...", some do not. Signed-off-by: Anton Blanchard Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 3248f83..df21f95 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -1085,7 +1085,7 @@ static void __init prom_instantiate_rtas(void) return; } - prom_printf("instantiating rtas at 0x%x ...", base); + prom_printf("instantiating rtas at 0x%x...", base); if (call_prom_ret("call-method", 3, 2, &entry, ADDR("instantiate-rtas"), @@ -1564,7 +1564,7 @@ static void __init prom_check_displays(void) if (call_prom("package-to-path", 3, 1, node, path, PROM_SCRATCH_SIZE-10) == PROM_ERROR) continue; - prom_printf("found display : %s, opening ... ", path); + prom_printf("found display : %s, opening... ", path); ih = call_prom("open", 1, 1, path); if (ih == 0) { @@ -2389,7 +2389,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, /* * Now finally create the flattened device-tree */ - prom_printf("copying OF device tree ...\n"); + prom_printf("copying OF device tree...\n"); flatten_device_tree(); /* @@ -2404,7 +2404,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, * Call OF "quiesce" method to shut down pending DMA's from * devices etc... */ - prom_printf("Calling quiesce ...\n"); + prom_printf("Calling quiesce...\n"); call_prom("quiesce", 0, 0); /* -- cgit v0.10.2 From 0559f0a7611bdd336b7297dce179f793b565f148 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Tue, 31 Mar 2009 20:12:44 +0000 Subject: powerpc/pseries: Add dispatch dispersion statistics PHYP tells us how often a shared processor dispatch changed physical cpus. This can highlight performance problems caused by the hypervisor. Signed-off-by: Anton Blanchard Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h index 68235f7..d2a65e8 100644 --- a/arch/powerpc/include/asm/lppaca.h +++ b/arch/powerpc/include/asm/lppaca.h @@ -125,7 +125,7 @@ struct lppaca { // NOTE: This value will ALWAYS be zero for dedicated processors and // will NEVER be zero for shared processors (ie, initialized to a 1). volatile u32 yield_count; // PLIC increments each dispatchx00-x03 - u32 reserved6; + volatile u32 dispersion_count; // dispatch changed phys cpu x04-x07 volatile u64 cmo_faults; // CMO page fault count x08-x0F volatile u64 cmo_fault_time; // CMO page fault time x10-x17 u8 reserved7[104]; // Reserved x18-x7F diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index 182e0f6..78b3f78 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -434,6 +434,21 @@ static void pseries_cmo_data(struct seq_file *m) seq_printf(m, "cmo_page_size=%lu\n", cmo_get_page_size()); } +static void splpar_dispatch_data(struct seq_file *m) +{ + int cpu; + unsigned long dispatches = 0; + unsigned long dispatch_dispersions = 0; + + for_each_possible_cpu(cpu) { + dispatches += lppaca[cpu].yield_count; + dispatch_dispersions += lppaca[cpu].dispersion_count; + } + + seq_printf(m, "dispatches=%lu\n", dispatches); + seq_printf(m, "dispatch_dispersions=%lu\n", dispatch_dispersions); +} + static int pseries_lparcfg_data(struct seq_file *m, void *v) { int partition_potential_processors; @@ -460,6 +475,7 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v) parse_ppp_data(m); parse_mpp_data(m); pseries_cmo_data(m); + splpar_dispatch_data(m); seq_printf(m, "purr=%ld\n", get_purr()); } else { /* non SPLPAR case */ -- cgit v0.10.2 From 4a9f9506e7cbee58d2b86329e68e4d37761bb608 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Tue, 31 Mar 2009 20:13:27 +0000 Subject: powerpc/pseries: Scan for all events in rtasd Instead of checking for known events, pass in all 1s so we handle future event types. We were currently missing the IO event type. Signed-off-by: Anton Blanchard Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h index 0aa0315..01c1233 100644 --- a/arch/powerpc/include/asm/rtas.h +++ b/arch/powerpc/include/asm/rtas.h @@ -68,7 +68,8 @@ struct rtas_t { #define RTAS_EPOW_WARNING 0x40000000 /* set bit 1 */ #define RTAS_POWERMGM_EVENTS 0x20000000 /* set bit 2 */ #define RTAS_HOTPLUG_EVENTS 0x10000000 /* set bit 3 */ -#define RTAS_EVENT_SCAN_ALL_EVENTS 0xf0000000 +#define RTAS_IO_EVENTS 0x08000000 /* set bit 4 */ +#define RTAS_EVENT_SCAN_ALL_EVENTS 0xffffffff /* RTAS event severity */ #define RTAS_SEVERITY_FATAL 0x5 -- cgit v0.10.2 From 856cc2f0bea673b5fcd1500533ee8ffd6c0749bd Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Tue, 31 Mar 2009 20:14:01 +0000 Subject: powerpc/pseries: Fix ibm,client-architecture comment We specify a 64MB RMO, but the comment says 128MB. Signed-off-by: Anton Blanchard Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index df21f95..2f0e64b 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -614,7 +614,7 @@ static unsigned char ibm_architecture_vec[] = { W(0xffffffff), /* virt_base */ W(0xffffffff), /* virt_size */ W(0xffffffff), /* load_base */ - W(64), /* 128MB min RMA */ + W(64), /* 64MB min RMA */ W(0xffffffff), /* full client load */ 0, /* min RMA percentage of total RAM */ 48, /* max log_2(hash table size) */ -- cgit v0.10.2 From 4c6cf42843e924fd2f71439d87e85b739b2aa973 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Tue, 31 Mar 2009 20:14:25 +0000 Subject: powerpc/pseries: Enable relay in pseries_defconfig Enable relay in pseries config, ppc64_defconfig had it enabled but pseries did not. Signed-off-by: Anton Blanchard Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 61b1008..f1889ab 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -95,7 +95,7 @@ CONFIG_CGROUP_CPUACCT=y CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_PROC_PID_CPUSET=y -# CONFIG_RELAY is not set +CONFIG_RELAY=y CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_IPC_NS is not set -- cgit v0.10.2 From 7e875e9dc8af70d126fa632446e967327ac3fdda Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 1 Apr 2009 18:02:42 +0000 Subject: powerpc: Disable VSX or current process in giveup_fpu/altivec When we call giveup_fpu, we need to need to turn off VSX for the current process. If we don't, on return to userspace it may execute a VSX instruction before the next FP instruction, and not have its register state refreshed correctly from the thread_struct. Ditto for altivec. This caused a bug where an unaligned lfs or stfs results in fix_alignment calling giveup_fpu so it can use the FPRs (in order to do a single <-> double conversion), and then returning to userspace with FP off but VSX on. Then if a VSX instruction is executed, before another FP instruction, it will proceed without another exception and hence have the incorrect register state for VSX registers 0-31. lfs unaligned <- alignment exception turns FP off but leaves VSX on VSX instruction <- no exception since VSX on, hence we get the wrong VSX register values for VSX registers 0-31, which overlap the FPRs. Signed-off-by: Michael Neuling Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S index a088c06..2436df3 100644 --- a/arch/powerpc/kernel/fpu.S +++ b/arch/powerpc/kernel/fpu.S @@ -145,6 +145,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX) beq 1f PPC_LL r4,_MSR-STACK_FRAME_OVERHEAD(r5) li r3,MSR_FP|MSR_FE0|MSR_FE1 +#ifdef CONFIG_VSX +BEGIN_FTR_SECTION + oris r3,r3,MSR_VSX@h +END_FTR_SECTION_IFSET(CPU_FTR_VSX) +#endif andc r4,r4,r3 /* disable FP for previous task */ PPC_STL r4,_MSR-STACK_FRAME_OVERHEAD(r5) 1: diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index 3053fe5..b9530b2 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -495,7 +495,15 @@ _GLOBAL(giveup_altivec) stvx vr0,r4,r3 beq 1f ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) +#ifdef CONFIG_VSX +BEGIN_FTR_SECTION + lis r3,(MSR_VEC|MSR_VSX)@h +FTR_SECTION_ELSE + lis r3,MSR_VEC@h +ALT_FTR_SECTION_END_IFSET(CPU_FTR_VSX) +#else lis r3,MSR_VEC@h +#endif andc r4,r4,r3 /* disable FP for previous task */ std r4,_MSR-STACK_FRAME_OVERHEAD(r5) 1: -- cgit v0.10.2 From cb93d568e1ed2596e27f35b39241fe83955d9b26 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 2 Apr 2009 06:25:41 +0000 Subject: powerpc: Correct dependency of KEXEC commit 28794d34ecb6815a3fa0a4256027c9b081a17c5f ("powerpc/kconfig: Kill PPC_MULTIPLATFORM") broke KEXEC, by making it dependent on BOOK3S, while it should be PPC_BOOK3S. Signed-off-by: Geert Uytterhoeven Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index e0f0a4d..5b50e1a 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -316,7 +316,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE config KEXEC bool "kexec system call (EXPERIMENTAL)" - depends on BOOK3S && EXPERIMENTAL + depends on PPC_BOOK3S && EXPERIMENTAL help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot -- cgit v0.10.2 From c7d07fdd5af084bbd0a7921f9b07037b9bc8829d Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Sun, 5 Apr 2009 16:05:02 +0000 Subject: powerpc: Print information about mapping hw irqs to virtual irqs The irq remapping layer seems to cause some confusion when people see a different irq number in /proc/interrupts vs the one they request in their driver or DTS. So have the irq remapping layer print out a message when we map an irq. The message is only printed the first time the irq is mapped, and it's KERN_DEBUG so most people won't see it. Signed-off-by: Michael Ellerman Acked-by: Grant Likely Acked-by: Wolfram Sang Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 5576147..8c1a496 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -672,11 +672,13 @@ unsigned int irq_create_mapping(struct irq_host *host, return NO_IRQ; } } - pr_debug("irq: -> obtained virq %d\n", virq); if (irq_setup_virq(host, virq, hwirq)) return NO_IRQ; + printk(KERN_DEBUG "irq: irq %lu on host %s mapped to virtual irq %u\n", + hwirq, host->of_node ? host->of_node->full_name : "null", virq); + return virq; } EXPORT_SYMBOL_GPL(irq_create_mapping); -- cgit v0.10.2 From bc826666e4252f78d2b144af3b7d699ff5efce0a Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Sun, 5 Apr 2009 20:59:39 +0000 Subject: powerpc: Fix ptrace compat wrapper for FPU register access The ptrace compat wrapper mishandles access to the fpu registers. The PTRACE_PEEKUSR and PTRACE_POKEUSR requests miscalculate the index into the fpr array due to the broken FPINDEX macro. The PPC_PTRACE_PEEKUSR_3264 request needs to use the same formula that the native ptrace interface uses when operating on the register number (as opposed to the 4-byte offset). The PPC_PTRACE_POKEUSR_3264 request didn't take TS_FPRWIDTH into account. Signed-off-by: Andreas Schwab Signed-off-by: Michael Neuling Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c index 197d49c..297632c 100644 --- a/arch/powerpc/kernel/ptrace32.c +++ b/arch/powerpc/kernel/ptrace32.c @@ -67,7 +67,8 @@ static long compat_ptrace_old(struct task_struct *child, long request, /* Macros to workout the correct index for the FPR in the thread struct */ #define FPRNUMBER(i) (((i) - PT_FPR0) >> 1) #define FPRHALF(i) (((i) - PT_FPR0) & 1) -#define FPRINDEX(i) TS_FPRWIDTH * FPRNUMBER(i) + FPRHALF(i) +#define FPRINDEX(i) TS_FPRWIDTH * FPRNUMBER(i) * 2 + FPRHALF(i) +#define FPRINDEX_3264(i) (TS_FPRWIDTH * ((i) - PT_FPR0)) long compat_arch_ptrace(struct task_struct *child, compat_long_t request, compat_ulong_t caddr, compat_ulong_t cdata) @@ -168,8 +169,9 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request, CHECK_FULL_REGS(child->thread.regs); if (numReg >= PT_FPR0) { flush_fp_to_thread(child); - tmp = ((unsigned long int *)child->thread.fpr) - [FPRINDEX(numReg)]; + /* get 64 bit FPR */ + tmp = ((u64 *)child->thread.fpr) + [FPRINDEX_3264(numReg)]; } else { /* register within PT_REGS struct */ tmp = ptrace_get_reg(child, numReg); } @@ -262,8 +264,13 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request, freg = (freg & 0xfffffffful) | (data << 32); ret = ptrace_put_reg(child, numReg, freg); } else { + u64 *tmp; flush_fp_to_thread(child); - ((unsigned int *)child->thread.regs)[index] = data; + /* get 64 bit FPR ... */ + tmp = &(((u64 *)child->thread.fpr) + [FPRINDEX_3264(numReg)]); + /* ... write the 32 bit part we want */ + ((u32 *)tmp)[index % 2] = data; ret = 0; } break; -- cgit v0.10.2 From f4952f6cbeb025bc90906b740dc495f4817266d6 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Mon, 6 Apr 2009 04:40:45 +0000 Subject: powerpc/ftrace: Fix #if that should be #ifdef Commit bb7253403f7a4670a128e4c080fd8ea1bd4d5029 ("powerpc64, ftrace: save toc only on modules for function graph"), added an #if CONFIG_PPC64. This changes it to #ifdef. Fixes the following warning on 32-bit builds: arch/powerpc/kernel/ftrace.c:562:5: error: "CONFIG_PPC64" is not defined Signed-off-by: Michael Ellerman Acked-by: Steven Rostedt Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c index 5455943..c2b90a9 100644 --- a/arch/powerpc/kernel/ftrace.c +++ b/arch/powerpc/kernel/ftrace.c @@ -564,7 +564,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) if (unlikely(atomic_read(¤t->tracing_graph_pause))) return; -#if CONFIG_PPC64 +#ifdef CONFIG_PPC64 /* non core kernel code needs to save and restore the TOC */ if (REGION_ID(self_addr) != KERNEL_REGION_ID) return_hooker = (unsigned long)&mod_return_to_handler; -- cgit v0.10.2 From 7ddb7ad11f862f46d6d55d629a6fb45a5f4cb030 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Mon, 6 Apr 2009 04:40:46 +0000 Subject: powerpc/ftrace: Fix printf format warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 'tramp' is an unsigned long, so print it with %lx. Fixes the following build warning: arch/powerpc/kernel/ftrace.c:291: error: format ‘%x’ expects type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ Signed-off-by: Michael Ellerman Acked-by: Steven Rostedt Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c index c2b90a9..70e2a73 100644 --- a/arch/powerpc/kernel/ftrace.c +++ b/arch/powerpc/kernel/ftrace.c @@ -293,7 +293,7 @@ __ftrace_make_nop(struct module *mod, if (tramp & 0x8000) tramp -= 0x10000; - pr_debug(" %x ", tramp); + pr_debug(" %lx ", tramp); if (tramp != addr) { printk(KERN_ERR -- cgit v0.10.2 From 1a917bb549deb0b6bcb0321db22e9c27525a1e3d Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 6 Apr 2009 17:19:50 +0000 Subject: powerpc: Wire up preadv and pwritev [paulus@samba.org: changed to use syscall numbers 320 and 321 since perf_counters is currently using 319.] Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h index fe16649..d98a30d 100644 --- a/arch/powerpc/include/asm/systbl.h +++ b/arch/powerpc/include/asm/systbl.h @@ -322,3 +322,6 @@ SYSCALL_SPU(epoll_create1) SYSCALL_SPU(dup3) SYSCALL_SPU(pipe2) SYSCALL(inotify_init1) +SYSCALL(ni_syscall) +COMPAT_SYS_SPU(preadv) +COMPAT_SYS_SPU(pwritev) diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h index e07d0c7..3f06f8e 100644 --- a/arch/powerpc/include/asm/unistd.h +++ b/arch/powerpc/include/asm/unistd.h @@ -341,10 +341,12 @@ #define __NR_dup3 316 #define __NR_pipe2 317 #define __NR_inotify_init1 318 +#define __NR_preadv 320 +#define __NR_pwritev 321 #ifdef __KERNEL__ -#define __NR_syscalls 319 +#define __NR_syscalls 322 #define __NR__exit __NR_exit #define NR_syscalls __NR_syscalls -- cgit v0.10.2 From 11b55da700eb77905f1c2dde3a0cbeedc665a753 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 6 Apr 2009 17:21:10 +0000 Subject: powerpc: Fix oops when loading modules This fixes a problem reported by Sean MacLennan where loading any module would cause an oops. We weren't marking the pages containing the module text as having hardware execute permission, due to a bug introduced in commit 8d1cf34e ("powerpc/mm: Tweak PTE bit combination definitions"), hence trying to execute the module text caused an exception on processors that support hardware execute permission. This adds _PAGE_HWEXEC to the definitions of PAGE_KERNEL_X and PAGE_KERNEL_ROX to fix this problem. Reported-by: Sean MacLennan Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/include/asm/pte-common.h b/arch/powerpc/include/asm/pte-common.h index d9740e8..a7e210b 100644 --- a/arch/powerpc/include/asm/pte-common.h +++ b/arch/powerpc/include/asm/pte-common.h @@ -151,9 +151,11 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void); _PAGE_NO_CACHE) #define PAGE_KERNEL_NCG __pgprot(_PAGE_BASE_NC | _PAGE_KERNEL_RW | \ _PAGE_NO_CACHE | _PAGE_GUARDED) -#define PAGE_KERNEL_X __pgprot(_PAGE_BASE | _PAGE_KERNEL_RW | _PAGE_EXEC) +#define PAGE_KERNEL_X __pgprot(_PAGE_BASE | _PAGE_KERNEL_RW | _PAGE_EXEC | \ + _PAGE_HWEXEC) #define PAGE_KERNEL_RO __pgprot(_PAGE_BASE | _PAGE_KERNEL_RO) -#define PAGE_KERNEL_ROX __pgprot(_PAGE_BASE | _PAGE_KERNEL_RO | _PAGE_EXEC) +#define PAGE_KERNEL_ROX __pgprot(_PAGE_BASE | _PAGE_KERNEL_RO | _PAGE_EXEC | \ + _PAGE_HWEXEC) /* Protection used for kernel text. We want the debuggers to be able to * set breakpoints anywhere, so don't write protect the kernel text -- cgit v0.10.2