From 9186a1fd9ed190739423db84bc344d258ef3e3d7 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Fri, 26 Jul 2013 15:29:09 +0200 Subject: iwlwifi: dvm: fix calling ieee80211_chswitch_done() with NULL If channel switch is pending and we remove interface we can crash like showed below due to passing NULL vif to mac80211: BUG: unable to handle kernel paging request at fffffffffffff8cc IP: [] strnlen+0xd/0x40 Call Trace: [] string.isra.3+0x3e/0xd0 [] vsnprintf+0x219/0x640 [] vscnprintf+0x11/0x30 [] vprintk_emit+0x115/0x4f0 [] printk+0x61/0x63 [] ieee80211_chswitch_done+0xaf/0xd0 [mac80211] [] iwl_chswitch_done+0x34/0x40 [iwldvm] [] iwlagn_commit_rxon+0x2a3/0xdc0 [iwldvm] [] ? iwlagn_set_rxon_chain+0x180/0x2c0 [iwldvm] [] iwl_set_mode+0x36/0x40 [iwldvm] [] iwlagn_mac_remove_interface+0x8d/0x1b0 [iwldvm] [] ieee80211_do_stop+0x29d/0x7f0 [mac80211] This is because we nulify ctx->vif in iwlagn_mac_remove_interface() before calling some other functions that teardown interface. To fix just check ctx->vif on iwl_chswitch_done(). We should not call ieee80211_chswitch_done() as channel switch works were already canceled by mac80211 in ieee80211_do_stop() -> ieee80211_mgd_stop(). Resolve: https://bugzilla.redhat.com/show_bug.cgi?id=979581 Cc: stable@vger.kernel.org Reported-by: Lukasz Jagiello Signed-off-by: Stanislaw Gruszka Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index 822f1a0..3193872 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -1068,7 +1068,10 @@ void iwl_chswitch_done(struct iwl_priv *priv, bool is_success) if (test_bit(STATUS_EXIT_PENDING, &priv->status)) return; - if (test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) + if (!test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) + return; + + if (ctx->vif) ieee80211_chswitch_done(ctx->vif, is_success); } -- cgit v0.10.2 From eabc4ac5d7606a57ee2b7308cb7323ea8f60183b Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 29 Jul 2013 23:05:18 +0300 Subject: iwlwifi: pcie: disable L1 Active after pci_enable_device As Arjan pointed out, we mustn't do anything related to PCI configuration until the device is properly enabled with pci_enable_device(). Cc: stable@vger.kernel.org Reported-by: Arjan van de Ven Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 96cfcdd..390e2f0 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -1502,16 +1502,16 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, spin_lock_init(&trans_pcie->reg_lock); init_waitqueue_head(&trans_pcie->ucode_write_waitq); - /* W/A - seems to solve weird behavior. We need to remove this if we - * don't want to stay in L1 all the time. This wastes a lot of power */ - pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 | - PCIE_LINK_STATE_CLKPM); - if (pci_enable_device(pdev)) { err = -ENODEV; goto out_no_pci; } + /* W/A - seems to solve weird behavior. We need to remove this if we + * don't want to stay in L1 all the time. This wastes a lot of power */ + pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 | + PCIE_LINK_STATE_CLKPM); + pci_set_master(pdev); err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36)); -- cgit v0.10.2 From 4f0c848a334ff1840a105c506883edbfaf0e57cc Mon Sep 17 00:00:00 2001 From: Guy Cohen Date: Thu, 1 Aug 2013 14:56:23 +0200 Subject: Revert "iwlwifi: pcie: clear RFKILL interrupt in AMPG" This reverts commit a53ee0a308b16e392e0219c585b10f329345766b. This fix causes a worse HW Error when entering RF-Kill. Signed-off-by: Guy Cohen Signed-off-by: Dor Shaish Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h index a70c7b9..ff8cc75 100644 --- a/drivers/net/wireless/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/iwlwifi/iwl-prph.h @@ -97,8 +97,6 @@ #define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800) -#define APMG_RTC_INT_STT_RFKILL (0x10000000) - /* Device system time */ #define DEVICE_SYSTEM_TIME_REG 0xA0206C diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index f600e68..fd848cd 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -888,14 +888,6 @@ irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id) iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill); if (hw_rfkill) { - /* - * Clear the interrupt in APMG if the NIC is going down. - * Note that when the NIC exits RFkill (else branch), we - * can't access prph and the NIC will be reset in - * start_hw anyway. - */ - iwl_write_prph(trans, APMG_RTC_INT_STT_REG, - APMG_RTC_INT_STT_RFKILL); set_bit(STATUS_RFKILL, &trans_pcie->status); if (test_and_clear_bit(STATUS_HCMD_ACTIVE, &trans_pcie->status)) -- cgit v0.10.2 From 057397943eee0bf3bc01a58ee52a9a6f1810258e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 25 Jul 2013 18:39:30 +0200 Subject: iwlwifi: mvm: disconnect if time event scheduling fails If scheduling an important time event fails, or if we get an unexpected notification from the firmware, there isn't much we can do to recover, so just drop the connection and let higher layers retry it. Reviewed-by: Ilan Peer Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/time-event.c b/drivers/net/wireless/iwlwifi/mvm/time-event.c index ad9bbca..7fd6fbf 100644 --- a/drivers/net/wireless/iwlwifi/mvm/time-event.c +++ b/drivers/net/wireless/iwlwifi/mvm/time-event.c @@ -138,6 +138,20 @@ static void iwl_mvm_roc_finished(struct iwl_mvm *mvm) schedule_work(&mvm->roc_done_wk); } +static bool iwl_mvm_te_check_disconnect(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + const char *errmsg) +{ + if (vif->type != NL80211_IFTYPE_STATION) + return false; + if (vif->bss_conf.assoc && vif->bss_conf.dtim_period) + return false; + if (errmsg) + IWL_ERR(mvm, "%s\n", errmsg); + ieee80211_connection_loss(vif); + return true; +} + /* * Handles a FW notification for an event that is known to the driver. * @@ -163,8 +177,13 @@ static void iwl_mvm_te_handle_notif(struct iwl_mvm *mvm, * P2P Device discoveribility, while there are other higher priority * events in the system). */ - WARN_ONCE(!le32_to_cpu(notif->status), - "Failed to schedule time event\n"); + if (WARN_ONCE(!le32_to_cpu(notif->status), + "Failed to schedule time event\n")) { + if (iwl_mvm_te_check_disconnect(mvm, te_data->vif, NULL)) { + iwl_mvm_te_clear_data(mvm, te_data); + return; + } + } if (le32_to_cpu(notif->action) & TE_NOTIF_HOST_EVENT_END) { IWL_DEBUG_TE(mvm, @@ -180,14 +199,8 @@ static void iwl_mvm_te_handle_notif(struct iwl_mvm *mvm, * By now, we should have finished association * and know the dtim period. */ - if (te_data->vif->type == NL80211_IFTYPE_STATION && - (!te_data->vif->bss_conf.assoc || - !te_data->vif->bss_conf.dtim_period)) { - IWL_ERR(mvm, - "No assocation and the time event is over already...\n"); - ieee80211_connection_loss(te_data->vif); - } - + iwl_mvm_te_check_disconnect(mvm, te_data->vif, + "No assocation and the time event is over already..."); iwl_mvm_te_clear_data(mvm, te_data); } else if (le32_to_cpu(notif->action) & TE_NOTIF_HOST_EVENT_START) { te_data->running = true; -- cgit v0.10.2 From 1206ff4ff9d2ef7468a355328bc58ac6ebf5be44 Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Tue, 6 Aug 2013 14:28:42 +0300 Subject: zd1201: do not use stack as URB transfer_buffer Patch fixes zd1201 not to use stack as URB transfer_buffer. URB buffers need to be DMA-able, which stack is not. Patch is only compile tested. Cc: stable@vger.kernel.org Signed-off-by: Jussi Kivilinna Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/zd1201.c b/drivers/net/wireless/zd1201.c index 4941f20..b8ba1f9 100644 --- a/drivers/net/wireless/zd1201.c +++ b/drivers/net/wireless/zd1201.c @@ -98,10 +98,12 @@ static int zd1201_fw_upload(struct usb_device *dev, int apfw) goto exit; err = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), 0x4, - USB_DIR_IN | 0x40, 0,0, &ret, sizeof(ret), ZD1201_FW_TIMEOUT); + USB_DIR_IN | 0x40, 0, 0, buf, sizeof(ret), ZD1201_FW_TIMEOUT); if (err < 0) goto exit; + memcpy(&ret, buf, sizeof(ret)); + if (ret & 0x80) { err = -EIO; goto exit; -- cgit v0.10.2 From 909bd5926d474e275599094acad986af79671ac9 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 9 Aug 2013 12:52:31 +0300 Subject: Hostap: copying wrong data prism2_ioctl_giwaplist() We want the data stored in "addr" and "qual", but the extra ampersands mean we are copying stack data instead. Signed-off-by: Dan Carpenter Cc: stable@vger.kernel.org Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c index ac07473..e509030 100644 --- a/drivers/net/wireless/hostap/hostap_ioctl.c +++ b/drivers/net/wireless/hostap/hostap_ioctl.c @@ -523,9 +523,9 @@ static int prism2_ioctl_giwaplist(struct net_device *dev, data->length = prism2_ap_get_sta_qual(local, addr, qual, IW_MAX_AP, 1); - memcpy(extra, &addr, sizeof(struct sockaddr) * data->length); + memcpy(extra, addr, sizeof(struct sockaddr) * data->length); data->flags = 1; /* has quality information */ - memcpy(extra + sizeof(struct sockaddr) * data->length, &qual, + memcpy(extra + sizeof(struct sockaddr) * data->length, qual, sizeof(struct iw_quality) * data->length); kfree(addr); -- cgit v0.10.2 From cb35fba360dfc3496e5d8a47e23ec5ccdfd90925 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 14 Aug 2013 14:50:01 +0300 Subject: nl80211: nl80211hdr_put() doesn't return an ERR_PTR There are a few places which check nl80211hdr_put() for an ERR_PTR but actually it returns NULL on error and never error values. In nl80211_testmode_dump() the return wasn't checked at all so I have added one. Signed-off-by: Dan Carpenter [some whitespace changes] Signed-off-by: Johannes Berg diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 3fcba69..5f6e982 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -2622,8 +2622,8 @@ static int nl80211_get_key(struct sk_buff *skb, struct genl_info *info) hdr = nl80211hdr_put(msg, info->snd_portid, info->snd_seq, 0, NL80211_CMD_NEW_KEY); - if (IS_ERR(hdr)) - return PTR_ERR(hdr); + if (!hdr) + return -ENOBUFS; cookie.msg = msg; cookie.idx = key_idx; @@ -6507,6 +6507,9 @@ static int nl80211_testmode_dump(struct sk_buff *skb, NL80211_CMD_TESTMODE); struct nlattr *tmdata; + if (!hdr) + break; + if (nla_put_u32(skb, NL80211_ATTR_WIPHY, phy_idx)) { genlmsg_cancel(skb, hdr); break; @@ -6951,9 +6954,8 @@ static int nl80211_remain_on_channel(struct sk_buff *skb, hdr = nl80211hdr_put(msg, info->snd_portid, info->snd_seq, 0, NL80211_CMD_REMAIN_ON_CHANNEL); - - if (IS_ERR(hdr)) { - err = PTR_ERR(hdr); + if (!hdr) { + err = -ENOBUFS; goto free_msg; } @@ -7251,9 +7253,8 @@ static int nl80211_tx_mgmt(struct sk_buff *skb, struct genl_info *info) hdr = nl80211hdr_put(msg, info->snd_portid, info->snd_seq, 0, NL80211_CMD_FRAME); - - if (IS_ERR(hdr)) { - err = PTR_ERR(hdr); + if (!hdr) { + err = -ENOBUFS; goto free_msg; } } @@ -8132,9 +8133,8 @@ static int nl80211_probe_client(struct sk_buff *skb, hdr = nl80211hdr_put(msg, info->snd_portid, info->snd_seq, 0, NL80211_CMD_PROBE_CLIENT); - - if (IS_ERR(hdr)) { - err = PTR_ERR(hdr); + if (!hdr) { + err = -ENOBUFS; goto free_msg; } -- cgit v0.10.2 From dee8a9732e713480075adbbca8eb220c5b8d1216 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 13 Aug 2013 09:23:57 +0200 Subject: cfg80211: don't request disconnect if not connected Neil Brown reports that with libertas, my recent cfg80211 SME changes in commit ceca7b7121795ef81bd598a240d53a92566 ("cfg80211: separate internal SME implementation") broke libertas suspend because it we now asked it to disconnect while already disconnected. The problematic change is in cfg80211_disconnect() as it previously checked the SME state and now calls the driver disconnect operation unconditionally. Fix this by checking if there's a current_bss indicating a connection, and do nothing if not. Reported-and-tested-by: Neil Brown Signed-off-by: Johannes Berg diff --git a/net/wireless/sme.c b/net/wireless/sme.c index 81c8a10..20e86a9 100644 --- a/net/wireless/sme.c +++ b/net/wireless/sme.c @@ -976,21 +976,19 @@ int cfg80211_disconnect(struct cfg80211_registered_device *rdev, struct net_device *dev, u16 reason, bool wextev) { struct wireless_dev *wdev = dev->ieee80211_ptr; - int err; + int err = 0; ASSERT_WDEV_LOCK(wdev); kfree(wdev->connect_keys); wdev->connect_keys = NULL; - if (wdev->conn) { + if (wdev->conn) err = cfg80211_sme_disconnect(wdev, reason); - } else if (!rdev->ops->disconnect) { + else if (!rdev->ops->disconnect) cfg80211_mlme_down(rdev, dev); - err = 0; - } else { + else if (wdev->current_bss) err = rdev_disconnect(rdev, dev, reason); - } return err; } -- cgit v0.10.2