From 5d5c8e03786691d0d083142b922edce8609c0fd5 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Thu, 5 Oct 2006 15:49:52 -0700 Subject: [PATCH] skge: better flow control negotiation Do flow control negotiation properly. Don't let auto negotiation status limit renegotiation. Separate desired pause values from the result of auto negotiation. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik diff --git a/drivers/net/skge.c b/drivers/net/skge.c index c19f49b..d844a83 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -487,31 +487,37 @@ static void skge_get_pauseparam(struct net_device *dev, { struct skge_port *skge = netdev_priv(dev); - ecmd->tx_pause = (skge->flow_control == FLOW_MODE_LOC_SEND) - || (skge->flow_control == FLOW_MODE_SYMMETRIC); - ecmd->rx_pause = (skge->flow_control == FLOW_MODE_REM_SEND) - || (skge->flow_control == FLOW_MODE_SYMMETRIC); + ecmd->rx_pause = (skge->flow_control == FLOW_MODE_SYMMETRIC) + || (skge->flow_control == FLOW_MODE_SYM_OR_REM); + ecmd->tx_pause = ecmd->rx_pause || (skge->flow_control == FLOW_MODE_LOC_SEND); - ecmd->autoneg = skge->autoneg; + ecmd->autoneg = ecmd->rx_pause || ecmd->tx_pause; } static int skge_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam *ecmd) { struct skge_port *skge = netdev_priv(dev); + struct ethtool_pauseparam old; - skge->autoneg = ecmd->autoneg; - if (ecmd->rx_pause && ecmd->tx_pause) - skge->flow_control = FLOW_MODE_SYMMETRIC; - else if (ecmd->rx_pause && !ecmd->tx_pause) - skge->flow_control = FLOW_MODE_REM_SEND; - else if (!ecmd->rx_pause && ecmd->tx_pause) - skge->flow_control = FLOW_MODE_LOC_SEND; - else - skge->flow_control = FLOW_MODE_NONE; + skge_get_pauseparam(dev, &old); + + if (ecmd->autoneg != old.autoneg) + skge->flow_control = ecmd->autoneg ? FLOW_MODE_NONE : FLOW_MODE_SYMMETRIC; + else { + if (ecmd->rx_pause && ecmd->tx_pause) + skge->flow_control = FLOW_MODE_SYMMETRIC; + else if (ecmd->rx_pause && !ecmd->tx_pause) + skge->flow_control = FLOW_MODE_SYM_OR_REM; + else if (!ecmd->rx_pause && ecmd->tx_pause) + skge->flow_control = FLOW_MODE_LOC_SEND; + else + skge->flow_control = FLOW_MODE_NONE; + } if (netif_running(dev)) skge_phy_reset(skge); + return 0; } @@ -854,6 +860,23 @@ static int skge_rx_fill(struct net_device *dev) return 0; } +static const char *skge_pause(enum pause_status status) +{ + switch(status) { + case FLOW_STAT_NONE: + return "none"; + case FLOW_STAT_REM_SEND: + return "rx only"; + case FLOW_STAT_LOC_SEND: + return "tx_only"; + case FLOW_STAT_SYMMETRIC: /* Both station may send PAUSE */ + return "both"; + default: + return "indeterminated"; + } +} + + static void skge_link_up(struct skge_port *skge) { skge_write8(skge->hw, SK_REG(skge->port, LNK_LED_REG), @@ -862,16 +885,13 @@ static void skge_link_up(struct skge_port *skge) netif_carrier_on(skge->netdev); netif_wake_queue(skge->netdev); - if (netif_msg_link(skge)) + if (netif_msg_link(skge)) { printk(KERN_INFO PFX "%s: Link is up at %d Mbps, %s duplex, flow control %s\n", skge->netdev->name, skge->speed, skge->duplex == DUPLEX_FULL ? "full" : "half", - (skge->flow_control == FLOW_MODE_NONE) ? "none" : - (skge->flow_control == FLOW_MODE_LOC_SEND) ? "tx only" : - (skge->flow_control == FLOW_MODE_REM_SEND) ? "rx only" : - (skge->flow_control == FLOW_MODE_SYMMETRIC) ? "tx and rx" : - "unknown"); + skge_pause(skge->flow_status)); + } } static void skge_link_down(struct skge_port *skge) @@ -1015,7 +1035,7 @@ static const u16 phy_pause_map[] = { [FLOW_MODE_NONE] = 0, [FLOW_MODE_LOC_SEND] = PHY_AN_PAUSE_ASYM, [FLOW_MODE_SYMMETRIC] = PHY_AN_PAUSE_CAP, - [FLOW_MODE_REM_SEND] = PHY_AN_PAUSE_CAP | PHY_AN_PAUSE_ASYM, + [FLOW_MODE_SYM_OR_REM] = PHY_AN_PAUSE_CAP | PHY_AN_PAUSE_ASYM, }; /* special defines for FIBER (88E1011S only) */ @@ -1023,7 +1043,7 @@ static const u16 fiber_pause_map[] = { [FLOW_MODE_NONE] = PHY_X_P_NO_PAUSE, [FLOW_MODE_LOC_SEND] = PHY_X_P_ASYM_MD, [FLOW_MODE_SYMMETRIC] = PHY_X_P_SYM_MD, - [FLOW_MODE_REM_SEND] = PHY_X_P_BOTH_MD, + [FLOW_MODE_SYM_OR_REM] = PHY_X_P_BOTH_MD, }; @@ -1072,20 +1092,19 @@ static void bcom_check_link(struct skge_hw *hw, int port) return; } - /* We are using IEEE 802.3z/D5.0 Table 37-4 */ switch (aux & PHY_B_AS_PAUSE_MSK) { case PHY_B_AS_PAUSE_MSK: - skge->flow_control = FLOW_MODE_SYMMETRIC; + skge->flow_status = FLOW_STAT_SYMMETRIC; break; case PHY_B_AS_PRR: - skge->flow_control = FLOW_MODE_REM_SEND; + skge->flow_status = FLOW_STAT_REM_SEND; break; case PHY_B_AS_PRT: - skge->flow_control = FLOW_MODE_LOC_SEND; + skge->flow_status = FLOW_STAT_LOC_SEND; break; default: - skge->flow_control = FLOW_MODE_NONE; + skge->flow_status = FLOW_STAT_NONE; } skge->speed = SPEED_1000; } @@ -1283,15 +1302,20 @@ static void xm_check_link(struct net_device *dev) } /* We are using IEEE 802.3z/D5.0 Table 37-4 */ - if (lpa & PHY_X_P_SYM_MD) - skge->flow_control = FLOW_MODE_SYMMETRIC; - else if ((lpa & PHY_X_RS_PAUSE) == PHY_X_P_ASYM_MD) - skge->flow_control = FLOW_MODE_REM_SEND; - else if ((lpa & PHY_X_RS_PAUSE) == PHY_X_P_BOTH_MD) - skge->flow_control = FLOW_MODE_LOC_SEND; + if ((skge->flow_control == FLOW_MODE_SYMMETRIC || + skge->flow_control == FLOW_MODE_SYM_OR_REM) && + (lpa & PHY_X_P_SYM_MD)) + skge->flow_status = FLOW_STAT_SYMMETRIC; + else if (skge->flow_control == FLOW_MODE_SYM_OR_REM && + (lpa & PHY_X_RS_PAUSE) == PHY_X_P_ASYM_MD) + /* Enable PAUSE receive, disable PAUSE transmit */ + skge->flow_status = FLOW_STAT_REM_SEND; + else if (skge->flow_control == FLOW_MODE_LOC_SEND && + (lpa & PHY_X_RS_PAUSE) == PHY_X_P_BOTH_MD) + /* Disable PAUSE receive, enable PAUSE transmit */ + skge->flow_status = FLOW_STAT_LOC_SEND; else - skge->flow_control = FLOW_MODE_NONE; - + skge->flow_status = FLOW_STAT_NONE; skge->speed = SPEED_1000; } @@ -1602,8 +1626,8 @@ static void genesis_link_up(struct skge_port *skge) * enabling pause frame reception is required for 1000BT * because the XMAC is not reset if the link is going down */ - if (skge->flow_control == FLOW_MODE_NONE || - skge->flow_control == FLOW_MODE_LOC_SEND) + if (skge->flow_status == FLOW_STAT_NONE || + skge->flow_status == FLOW_STAT_LOC_SEND) /* Disable Pause Frame Reception */ cmd |= XM_MMU_IGN_PF; else @@ -1613,8 +1637,8 @@ static void genesis_link_up(struct skge_port *skge) xm_write16(hw, port, XM_MMU_CMD, cmd); mode = xm_read32(hw, port, XM_MODE); - if (skge->flow_control == FLOW_MODE_SYMMETRIC || - skge->flow_control == FLOW_MODE_LOC_SEND) { + if (skge->flow_status== FLOW_STAT_SYMMETRIC || + skge->flow_status == FLOW_STAT_LOC_SEND) { /* * Configure Pause Frame Generation * Use internal and external Pause Frame Generation. @@ -1938,6 +1962,11 @@ static void yukon_mac_init(struct skge_hw *hw, int port) case FLOW_MODE_LOC_SEND: /* disable Rx flow-control */ reg |= GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS; + break; + case FLOW_MODE_SYMMETRIC: + case FLOW_MODE_SYM_OR_REM: + /* enable Tx & Rx flow-control */ + break; } gma_write16(hw, port, GM_GP_CTRL, reg); @@ -2132,13 +2161,11 @@ static void yukon_link_down(struct skge_port *skge) ctrl &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA); gma_write16(hw, port, GM_GP_CTRL, ctrl); - if (skge->flow_control == FLOW_MODE_REM_SEND) { + if (skge->flow_status == FLOW_STAT_REM_SEND) { + ctrl = gm_phy_read(hw, port, PHY_MARV_AUNE_ADV); + ctrl |= PHY_M_AN_ASP; /* restore Asymmetric Pause bit */ - gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, - gm_phy_read(hw, port, - PHY_MARV_AUNE_ADV) - | PHY_M_AN_ASP); - + gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, ctrl); } yukon_reset(hw, port); @@ -2185,19 +2212,19 @@ static void yukon_phy_intr(struct skge_port *skge) /* We are using IEEE 802.3z/D5.0 Table 37-4 */ switch (phystat & PHY_M_PS_PAUSE_MSK) { case PHY_M_PS_PAUSE_MSK: - skge->flow_control = FLOW_MODE_SYMMETRIC; + skge->flow_status = FLOW_STAT_SYMMETRIC; break; case PHY_M_PS_RX_P_EN: - skge->flow_control = FLOW_MODE_REM_SEND; + skge->flow_status = FLOW_STAT_REM_SEND; break; case PHY_M_PS_TX_P_EN: - skge->flow_control = FLOW_MODE_LOC_SEND; + skge->flow_status = FLOW_STAT_LOC_SEND; break; default: - skge->flow_control = FLOW_MODE_NONE; + skge->flow_status = FLOW_STAT_NONE; } - if (skge->flow_control == FLOW_MODE_NONE || + if (skge->flow_status == FLOW_STAT_NONE || (skge->speed < SPEED_1000 && skge->duplex == DUPLEX_HALF)) skge_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); else @@ -3420,7 +3447,7 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port, /* Auto speed and flow control */ skge->autoneg = AUTONEG_ENABLE; - skge->flow_control = FLOW_MODE_SYMMETRIC; + skge->flow_control = FLOW_MODE_SYM_OR_REM; skge->duplex = -1; skge->speed = -1; skge->advertising = skge_supported_modes(hw); diff --git a/drivers/net/skge.h b/drivers/net/skge.h index 9cc955c..537c0aa 100644 --- a/drivers/net/skge.h +++ b/drivers/net/skge.h @@ -2427,13 +2427,24 @@ struct skge_hw { struct mutex phy_mutex; }; -enum { - FLOW_MODE_NONE = 0, /* No Flow-Control */ - FLOW_MODE_LOC_SEND = 1, /* Local station sends PAUSE */ - FLOW_MODE_REM_SEND = 2, /* Symmetric or just remote */ +enum pause_control { + FLOW_MODE_NONE = 1, /* No Flow-Control */ + FLOW_MODE_LOC_SEND = 2, /* Local station sends PAUSE */ FLOW_MODE_SYMMETRIC = 3, /* Both stations may send PAUSE */ + FLOW_MODE_SYM_OR_REM = 4, /* Both stations may send PAUSE or + * just the remote station may send PAUSE + */ +}; + +enum pause_status { + FLOW_STAT_INDETERMINATED=0, /* indeterminated */ + FLOW_STAT_NONE, /* No Flow Control */ + FLOW_STAT_REM_SEND, /* Remote Station sends PAUSE */ + FLOW_STAT_LOC_SEND, /* Local station sends PAUSE */ + FLOW_STAT_SYMMETRIC, /* Both station may send PAUSE */ }; + struct skge_port { u32 msg_enable; struct skge_hw *hw; @@ -2446,9 +2457,10 @@ struct skge_port { struct net_device_stats net_stats; struct work_struct link_thread; + enum pause_control flow_control; + enum pause_status flow_status; u8 rx_csum; u8 blink_on; - u8 flow_control; u8 wol; u8 autoneg; /* AUTONEG_ENABLE, AUTONEG_DISABLE */ u8 duplex; /* DUPLEX_HALF, DUPLEX_FULL */ -- cgit v0.10.2