From db94d9d24526f83c432f0e5620078f02f7ae76ca Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 11 Jun 2007 15:31:30 +0800 Subject: Blackfin arch: remove defconfig file Since we have board-specific defconfigs and the default is set to BF537-STAMP, we no longer need this one Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu diff --git a/arch/blackfin/defconfig b/arch/blackfin/defconfig deleted file mode 100644 index a513fbe..0000000 --- a/arch/blackfin/defconfig +++ /dev/null @@ -1,1327 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.20.4 -# -# CONFIG_MMU is not set -# CONFIG_FPU is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_BLACKFIN=y -CONFIG_BFIN=y -CONFIG_SEMAPHORE_SLEEPERS=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -# CONFIG_GENERIC_TIME is not set -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_FORCE_MAX_ZONEORDER=14 -CONFIG_IRQCHIP_DEMUX_GPIO=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -# CONFIG_LIMIT_PAGECACHE is not set -CONFIG_BUDDY=y -# CONFIG_NP2 is not set -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -CONFIG_TINY_SHMEM=y -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -# CONFIG_IOSCHED_DEADLINE is not set -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_VOLUNTARY=y -# CONFIG_PREEMPT is not set - -# -# Blackfin Processor Options -# - -# -# Processor and Board Settings -# -# CONFIG_BF531 is not set -# CONFIG_BF532 is not set -# CONFIG_BF533 is not set -# CONFIG_BF534 is not set -# CONFIG_BF536 is not set -CONFIG_BF537=y -# CONFIG_BF561 is not set -CONFIG_BF_REV_0_2=y -# CONFIG_BF_REV_0_3 is not set -# CONFIG_BF_REV_0_4 is not set -# CONFIG_BF_REV_0_5 is not set -CONFIG_BFIN_SINGLE_CORE=y -# CONFIG_BFIN533_EZKIT is not set -# CONFIG_BFIN533_STAMP is not set -CONFIG_BFIN537_STAMP=y -# CONFIG_BFIN533_BLUETECHNIX_CM is not set -# CONFIG_BFIN537_BLUETECHNIX_CM is not set -# CONFIG_BFIN561_BLUETECHNIX_CM is not set -# CONFIG_BFIN561_EZKIT is not set -# CONFIG_PNAV10 is not set -# CONFIG_GENERIC_BOARD is not set -CONFIG_MEM_MT48LC32M8A2_75=y -CONFIG_IRQ_PLL_WAKEUP=7 - -# -# BF537 Specific Configuration -# - -# -# PORT F/G Selection -# -CONFIG_BF537_PORT_F=y -# CONFIG_BF537_PORT_G is not set -# CONFIG_BF537_PORT_H is not set - -# -# Interrupt Priority Assignment -# - -# -# Priority -# -CONFIG_IRQ_DMA_ERROR=7 -CONFIG_IRQ_ERROR=7 -CONFIG_IRQ_RTC=8 -CONFIG_IRQ_PPI=8 -CONFIG_IRQ_SPORT0_RX=9 -CONFIG_IRQ_SPORT0_TX=9 -CONFIG_IRQ_SPORT1_RX=9 -CONFIG_IRQ_SPORT1_TX=9 -CONFIG_IRQ_TWI=10 -CONFIG_IRQ_SPI=10 -CONFIG_IRQ_UART0_RX=10 -CONFIG_IRQ_UART0_TX=10 -CONFIG_IRQ_UART1_RX=10 -CONFIG_IRQ_UART1_TX=10 -CONFIG_IRQ_CAN_RX=11 -CONFIG_IRQ_CAN_TX=11 -CONFIG_IRQ_MAC_RX=11 -CONFIG_IRQ_MAC_TX=11 -CONFIG_IRQ_TMR0=12 -CONFIG_IRQ_TMR1=12 -CONFIG_IRQ_TMR2=12 -CONFIG_IRQ_TMR3=12 -CONFIG_IRQ_TMR4=12 -CONFIG_IRQ_TMR5=12 -CONFIG_IRQ_TMR6=12 -CONFIG_IRQ_TMR7=12 -CONFIG_IRQ_PROG_INTA=12 -CONFIG_IRQ_PORTG_INTB=12 -CONFIG_IRQ_MEM_DMA0=13 -CONFIG_IRQ_MEM_DMA1=13 -CONFIG_IRQ_WATCH=13 - -# -# Board customizations -# -# CONFIG_CMDLINE_BOOL is not set - -# -# Board Setup -# -CONFIG_CLKIN_HZ=25000000 -CONFIG_MEM_SIZE=64 -CONFIG_MEM_ADD_WIDTH=10 -CONFIG_BOOT_LOAD=0x1000 - -# -# Console UART Setup -# -# CONFIG_BAUD_9600 is not set -# CONFIG_BAUD_19200 is not set -# CONFIG_BAUD_38400 is not set -CONFIG_BAUD_57600=y -# CONFIG_BAUD_115200 is not set -CONFIG_BAUD_NO_PARITY=y -# CONFIG_BAUD_PARITY is not set -CONFIG_BAUD_1_STOPBIT=y -# CONFIG_BAUD_2_STOPBIT is not set - -# -# Blackfin Kernel Optimizations -# - -# -# Timer Tick -# -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 - -# -# Memory Optimizations -# -CONFIG_I_ENTRY_L1=y -CONFIG_EXCPT_IRQ_SYSC_L1=y -CONFIG_DO_IRQ_L1=y -CONFIG_CORE_TIMER_IRQ_L1=y -CONFIG_IDLE_L1=y -CONFIG_SCHEDULE_L1=y -CONFIG_ARITHMETIC_OPS_L1=y -CONFIG_ACCESS_OK_L1=y -CONFIG_MEMSET_L1=y -CONFIG_MEMCPY_L1=y -CONFIG_SYS_BFIN_SPINLOCK_L1=y -# CONFIG_IP_CHECKSUM_L1 is not set -# CONFIG_SYSCALL_TAB_L1 is not set -# CONFIG_CPLB_SWITCH_TAB_L1 is not set -CONFIG_RAMKERNEL=y -# CONFIG_ROMKERNEL is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_LARGE_ALLOCS=y -CONFIG_BFIN_DMA_5XX=y -# CONFIG_DMA_UNCACHED_2M is not set -CONFIG_DMA_UNCACHED_1M=y -# CONFIG_DMA_UNCACHED_NONE is not set - -# -# Cache Support -# -CONFIG_BLKFIN_CACHE=y -CONFIG_BLKFIN_DCACHE=y -# CONFIG_BLKFIN_DCACHE_BANKA is not set -# CONFIG_BLKFIN_CACHE_LOCK is not set -# CONFIG_BLKFIN_WB is not set -CONFIG_BLKFIN_WT=y -CONFIG_L1_MAX_PIECE=16 - -# -# Clock Settings -# -# CONFIG_BFIN_KERNEL_CLOCK is not set - -# -# Asynchonous Memory Configuration -# - -# -# EBIU_AMBCTL Global Control -# -CONFIG_C_AMCKEN=y -CONFIG_C_CDPRIO=y -# CONFIG_C_AMBEN is not set -# CONFIG_C_AMBEN_B0 is not set -# CONFIG_C_AMBEN_B0_B1 is not set -# CONFIG_C_AMBEN_B0_B1_B2 is not set -CONFIG_C_AMBEN_ALL=y - -# -# EBIU_AMBCTL Control -# -CONFIG_BANK_0=0x7BB0 -CONFIG_BANK_1=0x7BB0 -CONFIG_BANK_2=0x7BB0 -CONFIG_BANK_3=0x99B3 - -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_PCI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# - -# -# Executable file formats -# -CONFIG_BINFMT_ELF_FDPIC=y -CONFIG_BINFMT_FLAT=y -CONFIG_BINFMT_ZFLAT=y -# CONFIG_BINFMT_SHARED_FLAT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -CONFIG_PM=y -CONFIG_PM_LEGACY=y -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set -CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y -# CONFIG_PM_WAKEUP_BY_GPIO is not set -# CONFIG_PM_WAKEUP_GPIO_API is not set -CONFIG_PM_WAKEUP_SIC_IWR=0x80000000 - -# -# CPU Frequency scaling -# -# CONFIG_CPU_FREQ is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETLABEL is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRCOMM=m -# CONFIG_IRDA_ULTRA is not set - -# -# IrDA options -# -CONFIG_IRDA_CACHE_LAST_LSAP=y -# CONFIG_IRDA_FAST_RR is not set -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -CONFIG_IRTTY_SIR=m - -# -# Dongle support -# -# CONFIG_DONGLE is not set - -# -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# -# FIR device drivers -# -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=m -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -CONFIG_MTD_JEDECPROBE=m -CONFIG_MTD_GEN_PROBE=m -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_MW320D=m -CONFIG_MTD_RAM=y -CONFIG_MTD_ROM=m -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_BF5xx=m -CONFIG_BFIN_FLASH_SIZE=0x400000 -CONFIG_EBIU_FLASH_BASE=0x20000000 - -# -# FLASH_EBIU_AMBCTL Control -# -CONFIG_BFIN_FLASH_BANK_0=0x7BB0 -CONFIG_BFIN_FLASH_BANK_1=0x7BB0 -CONFIG_BFIN_FLASH_BANK_2=0x7BB0 -CONFIG_BFIN_FLASH_BANK_3=0x7BB0 -CONFIG_MTD_UCLINUX=y -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_DATAFLASH is not set -# CONFIG_MTD_M25P80 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -CONFIG_MTD_NAND=m -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -# CONFIG_MTD_NAND_ECC_SMC is not set -CONFIG_MTD_NAND_BFIN=m -CONFIG_BFIN_NAND_BASE=0x20212000 -CONFIG_BFIN_NAND_CLE=2 -CONFIG_BFIN_NAND_ALE=1 -CONFIG_BFIN_NAND_READY=3 -CONFIG_MTD_NAND_IDS=m -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_NANDSIM is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_SMC91X is not set -CONFIG_BFIN_MAC=y -CONFIG_BFIN_MAC_USE_L1=y -CONFIG_BFIN_TX_DESC_NUM=10 -CONFIG_BFIN_RX_DESC_NUM=20 -# CONFIG_BFIN_MAC_RMII is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=m -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_UINPUT is not set -# CONFIG_BF53X_PFBUTTONS is not set -CONFIG_TWI_KEYPAD=m -CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72 - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_AD9960 is not set -# CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF533_PFLAGS is not set -# CONFIG_BF5xx_PPIFCD is not set -# CONFIG_BF5xx_TIMERS is not set -# CONFIG_BF5xx_PPI is not set -CONFIG_BFIN_SPORT=y -# CONFIG_BFIN_TIMER_LATENCY is not set -CONFIG_TWI_LCD=m -CONFIG_TWI_LCD_SLAVE_ADDR=34 -# CONFIG_AD5304 is not set -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_BFIN=y -CONFIG_SERIAL_BFIN_CONSOLE=y -CONFIG_SERIAL_BFIN_DMA=y -# CONFIG_SERIAL_BFIN_PIO is not set -CONFIG_SERIAL_BFIN_UART0=y -# CONFIG_BFIN_UART0_CTSRTS is not set -# CONFIG_SERIAL_BFIN_UART1 is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_BFIN_SPORT is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# CAN, the car bus and industrial fieldbus -# -CONFIG_CAN4LINUX=y - -# -# linux embedded drivers -# -# CONFIG_CAN_MCF5282 is not set -# CONFIG_CAN_UNCTWINCAN is not set -CONFIG_CAN_BLACKFIN=m - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -CONFIG_BLACKFIN_DPMC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=m -CONFIG_I2C_CHARDEV=m - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_BLACKFIN_GPIO is not set -# CONFIG_I2C_BLACKFIN_TWI is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_AD5252=m -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8575 is not set -# CONFIG_SENSORS_PCA9543 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# -CONFIG_SPI=y -CONFIG_SPI_MASTER=y - -# -# SPI Master Controller Drivers -# -# CONFIG_SPI_BITBANG is not set - -# -# SPI Protocol Masters -# -CONFIG_SPI_BFIN=y - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM70 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47M192 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83791D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83793 is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FIRMWARE_EDID=y -CONFIG_FB=m -CONFIG_FB_CFB_FILLRECT=m -CONFIG_FB_CFB_COPYAREA=m -CONFIG_FB_CFB_IMAGEBLIT=m -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set -CONFIG_FB_BFIN_7171=m -CONFIG_FB_BFIN_7393=m -CONFIG_NTSC=y -# CONFIG_PAL is not set -# CONFIG_NTSC_640x480 is not set -# CONFIG_PAL_640x480 is not set -# CONFIG_NTSC_YCBCR is not set -# CONFIG_PAL_YCBCR is not set -CONFIG_ADV7393_1XMEM=y -# CONFIG_ADV7393_2XMEM is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Logo configuration -# -# CONFIG_LOGO is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=m -CONFIG_BACKLIGHT_DEVICE=y -CONFIG_LCD_CLASS_DEVICE=m -CONFIG_LCD_DEVICE=y - -# -# Sound -# -CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -# CONFIG_SND_SEQUENCER is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_PCM_OSS_PLUGINS=y -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set - -# -# HID Devices -# -CONFIG_HID=y - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_SPI_MMC is not set -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set - -# -# RTC drivers -# -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_RS5C348 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_TEST is not set -# CONFIG_RTC_DRV_MAX6902 is not set -# CONFIG_RTC_DRV_V3020 is not set -CONFIG_RTC_DRV_BFIN=y - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Virtualization -# - -# -# PBX support -# -# CONFIG_PBX is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -# CONFIG_EXT2_FS_POSIX_ACL is not set -# CONFIG_EXT2_FS_SECURITY is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -# CONFIG_TMPFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_YAFFS_FS=m -CONFIG_YAFFS_YAFFS1=y -# CONFIG_YAFFS_DOES_ECC is not set -CONFIG_YAFFS_YAFFS2=y -CONFIG_YAFFS_AUTO_YAFFS2=y -# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 -# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set -CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y -CONFIG_JFFS2_FS=m -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=m -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# -# CONFIG_DLM is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set -CONFIG_DEBUG_HUNT_FOR_ZERO=y -# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set -CONFIG_CPLB_INFO=y -CONFIG_ACCESS_CHECK=y - -# -# Security options -# -# CONFIG_KEYS is not set -CONFIG_SECURITY=y -# CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=y - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_PLIST=y -CONFIG_IOMAP_COPY=y -- cgit v0.10.2 From ac1bd53c067397947b5d805c631519282f5678fe Mon Sep 17 00:00:00 2001 From: Aubrey Li Date: Mon, 11 Jun 2007 15:31:30 +0800 Subject: Blackfin arch: DMA code minor naming convention fix Signed-off-by: Aubrey Li Signed-off-by: Bryan Wu Cc: Pekka Enberg diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 0ccb0dc..069a896 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -595,7 +595,7 @@ unsigned short get_dma_curr_ycount(unsigned int channel) } EXPORT_SYMBOL(get_dma_curr_ycount); -void *_dma_memcpy(void *dest, const void *src, size_t size) +static void *__dma_memcpy(void *dest, const void *src, size_t size) { int direction; /* 1 - address decrease, 0 - address increase */ int flag_align; /* 1 - address aligned, 0 - address unaligned */ @@ -744,8 +744,8 @@ void *dma_memcpy(void *dest, const void *src, size_t size) bulk = (size >> 16) << 16; rest = size - bulk; if (bulk) - _dma_memcpy(dest, src, bulk); - addr = _dma_memcpy(dest+bulk, src+bulk, rest); + __dma_memcpy(dest, src, bulk); + addr = __dma_memcpy(dest+bulk, src+bulk, rest); return addr; } -- cgit v0.10.2 From d2d50aa97d695d83ccb2341488d977e8cfe36555 Mon Sep 17 00:00:00 2001 From: Simon Arlott Date: Mon, 11 Jun 2007 15:31:30 +0800 Subject: Blackfin arch: spelling fixes Signed-off-by: Simon Arlott Signed-off-by: Bryan Wu diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c index df5bf02..80996a1 100644 --- a/arch/blackfin/kernel/irqchip.c +++ b/arch/blackfin/kernel/irqchip.c @@ -91,7 +91,7 @@ int show_interrupts(struct seq_file *p, void *v) } /* - * do_IRQ handles all hardware IRQ's. Decoded IRQs should not + * do_IRQ handles all hardware IRQs. Decoded IRQs should not * come via this function. Instead, they should provide their * own 'handler' */ diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 9932ede..5ab87b0 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -557,7 +557,7 @@ void dump_bfin_regs(struct pt_regs *fp, void *retaddr) break; #ifndef CONFIG_DEBUG_HWERR /* If one of the last few instructions was a STI - * it is likily that the error occured awhile ago + * it is likely that the error occured awhile ago * and we just noticed */ if (x >= 0x0040 && x <= 0x0047 && i <= 0) diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index 23a7f60..edd31ce 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -1,7 +1,7 @@ /* * File: arch/blackfin/mach-bf533/boards/cm_bf533.c * Based on: arch/blackfin/mach-bf533/boards/ezkit.c - * Author: Aidan Williams Copright 2005 + * Author: Aidan Williams Copyright 2005 * * Created: 2005 * Description: Board description file diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 747298e..0b522d9 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -1,6 +1,6 @@ /* * File: arch/blackfin/mach-bf533/ezkit.c - * Based on: Orginal Work + * Based on: Original Work * Author: Aidan Williams * * Created: 2005 diff --git a/arch/blackfin/mach-bf533/ints-priority.c b/arch/blackfin/mach-bf533/ints-priority.c index 36a6933..a3e1789 100644 --- a/arch/blackfin/mach-bf533/ints-priority.c +++ b/arch/blackfin/mach-bf533/ints-priority.c @@ -4,7 +4,7 @@ * Author: Michael Hennerich * * Created: ? - * Description: Set up the interupt priorities + * Description: Set up the interrupt priorities * * Modified: * Copyright 2004-2006 Analog Devices Inc. diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c index 9019c0e..fd57e74 100644 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -55,7 +55,7 @@ static struct resource bfin_pcmcia_cf_resources[] = { .end = 0x20312000, .flags = IORESOURCE_MEM, },{ - .start = 0x20311000, /* Attribute Memeory */ + .start = 0x20311000, /* Attribute Memory */ .end = 0x20311FFF, .flags = IORESOURCE_MEM, },{ diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 40d3a1b..8aaf76d 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -59,7 +59,7 @@ static struct resource bfin_pcmcia_cf_resources[] = { .end = 0x20312000, .flags = IORESOURCE_MEM, },{ - .start = 0x20311000, /* Attribute Memeory */ + .start = 0x20311000, /* Attribute Memory */ .end = 0x20311FFF, .flags = IORESOURCE_MEM, },{ diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index ba2f875..3a29b4d1 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -108,7 +108,7 @@ static struct resource bfin_pcmcia_cf_resources[] = { .end = 0x20312000, .flags = IORESOURCE_MEM, },{ - .start = 0x20311000, /* Attribute Memeory */ + .start = 0x20311000, /* Attribute Memory */ .end = 0x20311FFF, .flags = IORESOURCE_MEM, },{ diff --git a/arch/blackfin/mach-bf537/ints-priority.c b/arch/blackfin/mach-bf537/ints-priority.c index fd6308e..2dbf3df 100644 --- a/arch/blackfin/mach-bf537/ints-priority.c +++ b/arch/blackfin/mach-bf537/ints-priority.c @@ -4,7 +4,7 @@ * Author: Michael Hennerich * * Created: - * Description: Set up the interupt priorities + * Description: Set up the interrupt priorities * * Modified: * Copyright 2004-2006 Analog Devices Inc. diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index 6824e95..3dc5c04 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -1,7 +1,7 @@ /* * File: arch/blackfin/mach-bf533/boards/cm_bf561.c * Based on: arch/blackfin/mach-bf533/boards/ezkit.c - * Author: Aidan Williams Copright 2005 + * Author: Aidan Williams Copyright 2005 * * Created: 2006 * Description: Board description file @@ -43,7 +43,7 @@ char *bfin_board_name = "Bluetechnix CM BF561"; #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) -/* all SPI perpherals info goes here */ +/* all SPI peripherals info goes here */ #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { diff --git a/arch/blackfin/mach-bf561/ints-priority.c b/arch/blackfin/mach-bf561/ints-priority.c index 89c52ff..86e3b0e 100644 --- a/arch/blackfin/mach-bf561/ints-priority.c +++ b/arch/blackfin/mach-bf561/ints-priority.c @@ -4,7 +4,7 @@ * Author: Michael Hennerich * * Created: - * Description: Set up the interupt priorities + * Description: Set up the interrupt priorities * * Modified: * Copyright 2004-2006 Analog Devices Inc. diff --git a/arch/blackfin/mach-common/ints-priority-dc.c b/arch/blackfin/mach-common/ints-priority-dc.c index f3cf070..80943bb 100644 --- a/arch/blackfin/mach-common/ints-priority-dc.c +++ b/arch/blackfin/mach-common/ints-priority-dc.c @@ -4,7 +4,7 @@ * Author: * * Created: ? - * Description: Set up the interupt priorities + * Description: Set up the interrupt priorities * * Modified: * 1996 Roman Zippel diff --git a/arch/blackfin/mach-common/ints-priority-sc.c b/arch/blackfin/mach-common/ints-priority-sc.c index 34b6228..2cfc7d5 100644 --- a/arch/blackfin/mach-common/ints-priority-sc.c +++ b/arch/blackfin/mach-common/ints-priority-sc.c @@ -4,7 +4,7 @@ * Author: * * Created: ? - * Description: Set up the interupt priorities + * Description: Set up the interrupt priorities * * Modified: * 1996 Roman Zippel diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c index dd0c650..3c9e635 100644 --- a/arch/blackfin/mm/blackfin_sram.c +++ b/arch/blackfin/mm/blackfin_sram.c @@ -149,7 +149,7 @@ static void *_l1_sram_alloc(size_t size, struct l1_sram_piece *pfree, int count) size = (size + 3) & ~3; /* not use the good method to match the best slot !!! */ - /* search an available memeory slot */ + /* search an available memory slot */ for (i = 0; i < count; i++) { if ((pfree[i].flag == SRAM_SLT_FREE) && (pfree[i].size >= size)) { @@ -162,7 +162,7 @@ static void *_l1_sram_alloc(size_t size, struct l1_sram_piece *pfree, int count) if (i >= count) return NULL; - /* updated the NULL memeory slot !!! */ + /* updated the NULL memory slot !!! */ if (pfree[i].size > size) { for (i = 0; i < count; i++) { if (pfree[i].flag == SRAM_SLT_NULL) { @@ -186,7 +186,7 @@ static void *_l1_sram_alloc_max(struct l1_sram_piece *pfree, int count, int i, index = -1; void *addr = NULL; - /* search an available memeory slot */ + /* search an available memory slot */ for (i = 0; i < count; i++) { if (pfree[i].flag == SRAM_SLT_FREE && pfree[i].size > best) { addr = pfree[i].paddr; -- cgit v0.10.2 From 75ed405c63b3fc2402fb8ff825b0ebffcff26b57 Mon Sep 17 00:00:00 2001 From: Roy Huang Date: Thu, 14 Jun 2007 12:54:44 +0800 Subject: Blackfin arch: fix bug ad1836 fails to build properly for BF533-EZKIT bug log here: http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3166 Signed-off-by: Roy Huang Signed-off-by: Bryan Wu diff --git a/include/asm-blackfin/mach-common/def_LPBlackfin.h b/include/asm-blackfin/mach-common/def_LPBlackfin.h index 7610352..be1ece8 100644 --- a/include/asm-blackfin/mach-common/def_LPBlackfin.h +++ b/include/asm-blackfin/mach-common/def_LPBlackfin.h @@ -42,6 +42,12 @@ #if defined(ANOMALY_05000198) +#define bfin_read8(addr) ({ unsigned char __v; \ + __asm__ __volatile__ ("NOP;\n\t" \ + "%0 = b[%1] (z);\n\t" \ + : "=d"(__v) : "a"(addr)); \ + __v; }) + #define bfin_read16(addr) ({ unsigned __v; \ __asm__ __volatile__ ("NOP;\n\t"\ "%0 = w[%1] (z);\n\t"\ @@ -52,6 +58,11 @@ "%0 = [%1];\n\t"\ : "=d"(__v) : "a"(addr)); __v; }) +#define bfin_write8(addr, val) ({ \ + __asm__ __volatile__ ("NOP;\n\t" \ + "b[%0] = %1;\n\t" \ + : : "a"(addr), "d"(val) : "memory");}) + #define bfin_write16(addr,val) ({\ __asm__ __volatile__ ("NOP;\n\t"\ "w[%0] = %1;\n\t"\ @@ -64,6 +75,12 @@ #else +#define bfin_read8(addr) ({ unsigned char __v; \ + __asm__ __volatile__ ( \ + "%0 = b[%1] (z);\n\t" \ + :"=d"(__v) : "a"(addr)); \ + __v; }) + #define bfin_read16(addr) ({ unsigned __v; \ __asm__ __volatile__ (\ "%0 = w[%1] (z);\n\t"\ @@ -74,6 +91,11 @@ "%0 = [%1];\n\t"\ : "=d"(__v) : "a"(addr)); __v; }) +#define bfin_write8(addr, val) ({ \ + __asm__ __volatile__ ( \ + "b[%0] = %1; \n\t" \ + ::"a"(addr), "d"(val) : "memory");}) + #define bfin_write16(addr,val) ({\ __asm__ __volatile__ (\ "w[%0] = %1;\n\t"\ -- cgit v0.10.2 From 5716e514ed526a819775c45a73f1c8b65309e9d3 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Mon, 11 Jun 2007 15:31:30 +0800 Subject: Blackfin arch: all symbols were offset by 4k, since we didn't have the __text label. Bug tracker: http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3231 Singed-off-by: Robin Getz Signed-off-by: Bryan Wu diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index 86fe679..19b853af 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -52,6 +52,7 @@ SECTIONS .text : { + __text = .; _text = .; __stext = .; TEXT_TEXT -- cgit v0.10.2 From 321f6e0f5183e489448ae61af79cca1b7fe43e88 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 11 Jun 2007 15:31:30 +0800 Subject: Blackfin arch: mark our memory init functions with __init so they get freed after init Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c index 3c9e635..0241764 100644 --- a/arch/blackfin/mm/blackfin_sram.c +++ b/arch/blackfin/mm/blackfin_sram.c @@ -7,7 +7,7 @@ * Description: SRAM driver for Blackfin ADSP-BF5xx * * Modified: - * Copyright 2004-2006 Analog Devices Inc. + * Copyright 2004-2007 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -80,7 +80,7 @@ static struct l1_sram_piece l1_inst_sram[CONFIG_L1_MAX_PIECE]; #endif /* L1 Scratchpad SRAM initialization function */ -void l1sram_init(void) +void __init l1sram_init(void) { printk(KERN_INFO "Blackfin Scratchpad data SRAM: %d KB\n", L1_SCRATCH_LENGTH >> 10); @@ -94,7 +94,7 @@ void l1sram_init(void) spin_lock_init(&l1sram_lock); } -void l1_data_sram_init(void) +void __init l1_data_sram_init(void) { #if L1_DATA_A_LENGTH != 0 printk(KERN_INFO "Blackfin DATA_A SRAM: %d KB\n", @@ -120,7 +120,7 @@ void l1_data_sram_init(void) spin_lock_init(&l1_data_sram_lock); } -void l1_inst_sram_init(void) +void __init l1_inst_sram_init(void) { #if L1_CODE_LENGTH != 0 printk(KERN_INFO "Blackfin Instruction SRAM: %d KB\n", diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c index d6cf105..570356d 100644 --- a/arch/blackfin/mm/init.c +++ b/arch/blackfin/mm/init.c @@ -7,7 +7,7 @@ * Description: * * Modified: - * Copyright 2004-2006 Analog Devices Inc. + * Copyright 2004-2007 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -53,7 +53,7 @@ static unsigned long empty_bad_page; unsigned long empty_zero_page; -void show_mem(void) +void __init show_mem(void) { unsigned long i; int free = 0, total = 0, reserved = 0, shared = 0; @@ -86,7 +86,7 @@ void show_mem(void) * The parameters are pointers to where to stick the starting and ending * addresses of available kernel virtual memory. */ -void paging_init(void) +void __init paging_init(void) { /* * make sure start_mem is page aligned, otherwise bootmem and @@ -125,7 +125,7 @@ void paging_init(void) } } -void mem_init(void) +void __init mem_init(void) { unsigned int codek = 0, datak = 0, initk = 0; unsigned long tmp; @@ -169,7 +169,7 @@ void mem_init(void) } #ifdef CONFIG_BLK_DEV_INITRD -void free_initrd_mem(unsigned long start, unsigned long end) +void __init free_initrd_mem(unsigned long start, unsigned long end) { int pages = 0; for (; start < end; start += PAGE_SIZE) { @@ -183,14 +183,14 @@ void free_initrd_mem(unsigned long start, unsigned long end) } #endif -void free_initmem(void) +void __init free_initmem(void) { #ifdef CONFIG_RAMKERNEL unsigned long addr; -/* - * the following code should be cool even if these sections - * are not page aligned. - */ + /* + * the following code should be cool even if these sections + * are not page aligned. + */ addr = PAGE_ALIGN((unsigned long)(__init_begin)); /* next to check that the page we free is not a partial page */ for (; addr + PAGE_SIZE < (unsigned long)(__init_end); -- cgit v0.10.2 From bc61b4e69d26a1b9627d52ab45064eee9284aa72 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 14 Jun 2007 13:21:08 +0800 Subject: Blackfin arch: implement a basic /proc/sram file for L1 allocation visibility implement a basic /proc/sram file for L1 allocation visibility until we can rewrite the entire L1 allocator (which would include a proper mechanism) Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c index 0241764..dbb37b8 100644 --- a/arch/blackfin/mm/blackfin_sram.c +++ b/arch/blackfin/mm/blackfin_sram.c @@ -63,6 +63,7 @@ struct l1_sram_piece { void *paddr; int size; int flag; + pid_t pid; }; static struct l1_sram_piece l1_ssram[CONFIG_L1_MAX_PIECE]; @@ -97,23 +98,23 @@ void __init l1sram_init(void) void __init l1_data_sram_init(void) { #if L1_DATA_A_LENGTH != 0 - printk(KERN_INFO "Blackfin DATA_A SRAM: %d KB\n", - L1_DATA_A_LENGTH >> 10); - memset(&l1_data_A_sram, 0x00, sizeof(l1_data_A_sram)); - l1_data_A_sram[0].paddr = (void*)L1_DATA_A_START + - (_ebss_l1 - _sdata_l1); + l1_data_A_sram[0].paddr = (void *)L1_DATA_A_START + + (_ebss_l1 - _sdata_l1); l1_data_A_sram[0].size = L1_DATA_A_LENGTH - (_ebss_l1 - _sdata_l1); l1_data_A_sram[0].flag = SRAM_SLT_FREE; + + printk(KERN_INFO "Blackfin Data A SRAM: %d KB (%d KB free)\n", + L1_DATA_A_LENGTH >> 10, l1_data_A_sram[0].size >> 10); #endif #if L1_DATA_B_LENGTH != 0 - printk(KERN_INFO "Blackfin DATA_B SRAM: %d KB\n", - L1_DATA_B_LENGTH >> 10); - memset(&l1_data_B_sram, 0x00, sizeof(l1_data_B_sram)); l1_data_B_sram[0].paddr = (void*)L1_DATA_B_START; l1_data_B_sram[0].size = L1_DATA_B_LENGTH; l1_data_B_sram[0].flag = SRAM_SLT_FREE; + + printk(KERN_INFO "Blackfin Data B SRAM: %d KB (%d KB free)\n", + L1_DATA_B_LENGTH >> 10, l1_data_B_sram[0].size >> 10); #endif /* mutex initialize */ @@ -123,13 +124,13 @@ void __init l1_data_sram_init(void) void __init l1_inst_sram_init(void) { #if L1_CODE_LENGTH != 0 - printk(KERN_INFO "Blackfin Instruction SRAM: %d KB\n", - L1_CODE_LENGTH >> 10); - memset(&l1_inst_sram, 0x00, sizeof(l1_inst_sram)); l1_inst_sram[0].paddr = (void*)L1_CODE_START + (_etext_l1 - _stext_l1); l1_inst_sram[0].size = L1_CODE_LENGTH - (_etext_l1 - _stext_l1); l1_inst_sram[0].flag = SRAM_SLT_FREE; + + printk(KERN_INFO "Blackfin Instruction SRAM: %d KB (%d KB free)\n", + L1_CODE_LENGTH >> 10, l1_inst_sram[0].size >> 10); #endif /* mutex initialize */ @@ -155,6 +156,7 @@ static void *_l1_sram_alloc(size_t size, struct l1_sram_piece *pfree, int count) && (pfree[i].size >= size)) { addr = pfree[i].paddr; pfree[i].flag = SRAM_SLT_ALLOCATED; + pfree[i].pid = current->pid; index = i; break; } @@ -166,6 +168,7 @@ static void *_l1_sram_alloc(size_t size, struct l1_sram_piece *pfree, int count) if (pfree[i].size > size) { for (i = 0; i < count; i++) { if (pfree[i].flag == SRAM_SLT_NULL) { + pfree[i].pid = 0; pfree[i].flag = SRAM_SLT_FREE; pfree[i].paddr = addr + size; pfree[i].size = pfree[index].size - size; @@ -198,13 +201,15 @@ static void *_l1_sram_alloc_max(struct l1_sram_piece *pfree, int count, return NULL; *psize = best; + pfree[index].pid = current->pid; pfree[index].flag = SRAM_SLT_ALLOCATED; return addr; } /* L1 memory free function */ static int _l1_sram_free(const void *addr, - struct l1_sram_piece *pfree, int count) + struct l1_sram_piece *pfree, + int count) { int i, index = 0; @@ -222,12 +227,14 @@ static int _l1_sram_free(const void *addr, if (i >= count) return -1; + pfree[index].pid = 0; pfree[index].flag = SRAM_SLT_FREE; /* link the next address slot */ for (i = 0; i < count; i++) { if (((pfree[index].paddr + pfree[index].size) == pfree[i].paddr) && (pfree[i].flag == SRAM_SLT_FREE)) { + pfree[i].pid = 0; pfree[i].flag = SRAM_SLT_NULL; pfree[index].size += pfree[i].size; pfree[index].flag = SRAM_SLT_FREE; @@ -538,3 +545,64 @@ void *sram_alloc_with_lsl(size_t size, unsigned long flags) return addr; } EXPORT_SYMBOL(sram_alloc_with_lsl); + +#ifdef CONFIG_PROC_FS +/* Once we get a real allocator, we'll throw all of this away. + * Until then, we need some sort of visibility into the L1 alloc. + */ +static void _l1sram_proc_read(char *buf, int *len, const char *desc, + struct l1_sram_piece *pfree, const int array_size) +{ + int i; + + *len += sprintf(&buf[*len], "--- L1 %-14s Size PID State\n", desc); + for (i = 0; i < array_size; ++i) { + const char *alloc_type; + switch (pfree[i].flag) { + case SRAM_SLT_NULL: alloc_type = "NULL"; break; + case SRAM_SLT_FREE: alloc_type = "FREE"; break; + case SRAM_SLT_ALLOCATED: alloc_type = "ALLOCATED"; break; + default: alloc_type = "????"; break; + } + *len += sprintf(&buf[*len], "%p-%p %8i %4i %s\n", + pfree[i].paddr, pfree[i].paddr + pfree[i].size, + pfree[i].size, pfree[i].pid, alloc_type); + } +} +static int l1sram_proc_read(char *buf, char **start, off_t offset, int count, + int *eof, void *data) +{ + int len = 0; + + _l1sram_proc_read(buf, &len, "Scratchpad", + l1_ssram, ARRAY_SIZE(l1_ssram)); +#if L1_DATA_A_LENGTH != 0 + _l1sram_proc_read(buf, &len, "Data A", + l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram)); +#endif +#if L1_DATA_B_LENGTH != 0 + _l1sram_proc_read(buf, &len, "Data B", + l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram)); +#endif +#if L1_CODE_LENGTH != 0 + _l1sram_proc_read(buf, &len, "Instruction", + l1_inst_sram, ARRAY_SIZE(l1_inst_sram)); +#endif + + return len; +} + +static int __init l1sram_proc_init(void) +{ + struct proc_dir_entry *ptr; + ptr = create_proc_entry("sram", S_IFREG | S_IRUGO, NULL); + if (!ptr) { + printk(KERN_WARNING "unable to create /proc/sram\n"); + return -1; + } + ptr->owner = THIS_MODULE; + ptr->read_proc = l1sram_proc_read; + return 0; +} +late_initcall(l1sram_proc_init); +#endif -- cgit v0.10.2 From e3b2d3f33b3c1ef36b5c77ef581506915c73aad6 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Mon, 11 Jun 2007 15:31:30 +0800 Subject: Blackfin arch: fixup Blackfin MAINTIANERS team member list Signed-off-by: Bryan Wu diff --git a/MAINTAINERS b/MAINTAINERS index 4c715a7..8b26d9e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -723,42 +723,44 @@ M: rpurdie@rpsys.net S: Maintained BLACKFIN ARCHITECTURE -P: Aubrey Li -M: aubrey.li@analog.com -P: Bernd Schmidt -M: bernd.schmidt@analog.com -P: Bryan Wu -M: bryan.wu@analog.com -P: Grace Pan -M: grace.pan@analog.com -P: Michael Hennerich -M: michael.hennerich@analog.com -P: Mike Frysinger -M: michael.frysinger@analog.com -P: Jane Lv -M: jane.lv@analog.com -P: Jerry Zeng -M: jerry.zeng@analog.com -P: Jie Zhang -M: jie.zhang@analog.com -P: Robin Getz -M: robin.getz@analog.com -P: Roy Huang -M: roy.huang@analog.com -P: Sonic Zhang -M: sonic.zhang@analog.com -P: Yi Li -M: yi.li@analog.com -L: uclinux-dist-devel@blackfin.uclinux.org -W: http://blackfin.uclinux.org -S: Supported +P: Aubrey Li +M: aubrey.li@analog.com +P: Bernd Schmidt +M: bernd.schmidt@analog.com +P: Bryan Wu +M: bryan.wu@analog.com +P: Grace Pan +M: grace.pan@analog.com +P: Marc Hoffman +M: marc.hoffman@analog.com +P: Michael Hennerich +M: michael.hennerich@analog.com +P: Mike Frysinger +M: michael.frysinger@analog.com +P: Jerry Zeng +M: jerry.zeng@analog.com +P: Jie Zhang +M: jie.zhang@analog.com +P: Robin Getz +M: robin.getz@analog.com +P: Roy Huang +M: roy.huang@analog.com +P: Sonic Zhang +M: sonic.zhang@analog.com +P: Vivi Li +M: vivi.li@analog.com +P: Yi Li +M: yi.li@analog.com +L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) +W: http://blackfin.uclinux.org +S: Supported BLACKFIN SERIAL DRIVER -P: Aubrey Li -M: aubrey.li@analog.com -L: uclinux-dist-devel@blackfin.uclinux.org -W: http://blackfin.uclinux.org -S: Supported +P: Aubrey Li +M: aubrey.li@analog.com +L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) +W: http://blackfin.uclinux.org +S: Supported BAYCOM/HDLCDRV DRIVERS FOR AX.25 P: Thomas Sailer -- cgit v0.10.2 From 4dfefcf05417f98292a92f2face186d261867952 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 11 Jun 2007 15:31:30 +0800 Subject: Blackfin arch: scrub old console defines since they arent respected anymore (use console=) and just confuse people Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index b1b111b..1fad856 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -394,41 +394,6 @@ config BFIN_IDLE_LED_PIN default 0x08 if (BFIN533_STAMP && BFIN_IDLE_LED_NUM = 2) default 0x10 if (BFIN533_STAMP && BFIN_IDLE_LED_NUM = 3) -comment "Console UART Setup" - -choice - prompt "Baud Rate" - default BAUD_57600 -config BAUD_9600 - bool "9600" -config BAUD_19200 - bool "19200" -config BAUD_38400 - bool "38400" -config BAUD_57600 - bool "57600" -config BAUD_115200 - bool "115200" -endchoice - -choice - prompt "Parity" - default BAUD_NO_PARITY -config BAUD_NO_PARITY - bool "No Parity" -config BAUD_PARITY - bool "Parity" -endchoice - -choice - prompt "Stop Bits" - default BAUD_1_STOPBIT -config BAUD_1_STOPBIT - bool "1" -config BAUD_2_STOPBIT - bool "2" -endchoice - endmenu -- cgit v0.10.2 From 16983de0cec7b93cc2568f96909d4ea7c118bd8a Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 11 Jun 2007 15:31:30 +0800 Subject: Blackfin arch: update defconfigs Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index 377c8e0..90d58aa 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -1,20 +1,21 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19.3 +# Linux kernel version: 2.6.21.3 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_ZONE_DMA=y CONFIG_BFIN=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +# CONFIG_GENERIC_TIME is not set CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_UCLINUX=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_IRQCHIP_DEMUX_GPIO=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -33,13 +34,16 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -54,9 +58,7 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_EPOLL=y CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -# CONFIG_LIMIT_PAGECACHE is not set CONFIG_BUDDY=y # CONFIG_NP2 is not set CONFIG_SLAB=y @@ -80,7 +82,9 @@ CONFIG_KMOD=y # Block layer # CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -109,7 +113,6 @@ CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_BF532 is not set CONFIG_BF533=y # CONFIG_BF534 is not set -# CONFIG_BF535 is not set # CONFIG_BF536 is not set # CONFIG_BF537 is not set # CONFIG_BF561 is not set @@ -125,6 +128,7 @@ CONFIG_BFIN533_EZKIT=y # CONFIG_BFIN537_BLUETECHNIX_CM is not set # CONFIG_BFIN561_BLUETECHNIX_CM is not set # CONFIG_BFIN561_EZKIT is not set +# CONFIG_BFIN561_TEPLA is not set # CONFIG_PNAV10 is not set # CONFIG_GENERIC_BOARD is not set CONFIG_MEM_MT48LC16M16A2TG_75=y @@ -168,6 +172,7 @@ CONFIG_WDTIMER=13 # # Board customizations # +# CONFIG_CMDLINE_BOOL is not set # # Board Setup @@ -178,19 +183,6 @@ CONFIG_MEM_ADD_WIDTH=9 CONFIG_BOOT_LOAD=0x1000 # -# Console UART Setup -# -# CONFIG_BAUD_9600 is not set -# CONFIG_BAUD_19200 is not set -# CONFIG_BAUD_38400 is not set -CONFIG_BAUD_57600=y -# CONFIG_BAUD_115200 is not set -CONFIG_BAUD_NO_PARITY=y -# CONFIG_BAUD_PARITY is not set -CONFIG_BAUD_1_STOPBIT=y -# CONFIG_BAUD_2_STOPBIT is not set - -# # Blackfin Kernel Optimizations # @@ -199,6 +191,7 @@ CONFIG_BAUD_1_STOPBIT=y # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 @@ -217,6 +210,7 @@ CONFIG_MEMSET_L1=y CONFIG_MEMCPY_L1=y CONFIG_SYS_BFIN_SPINLOCK_L1=y # CONFIG_IP_CHECKSUM_L1 is not set +CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set CONFIG_RAMKERNEL=y @@ -230,6 +224,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 CONFIG_LARGE_ALLOCS=y CONFIG_BFIN_DMA_5XX=y # CONFIG_DMA_UNCACHED_2M is not set @@ -302,7 +297,7 @@ CONFIG_BINFMT_ZFLAT=y # Power management options # CONFIG_PM=y -CONFIG_PM_LEGACY=y +# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set # CONFIG_PM_SYSFS_DEPRECATED is not set CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y @@ -330,6 +325,7 @@ CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -356,6 +352,7 @@ CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -399,7 +396,48 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +CONFIG_IRDA_CACHE_LAST_LSAP=y +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +CONFIG_IRTTY_SIR=m + +# +# Dongle support +# +# CONFIG_DONGLE is not set + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# # CONFIG_BT is not set # CONFIG_IEEE80211 is not set @@ -434,6 +472,7 @@ CONFIG_MTD_PARTITIONS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set @@ -489,6 +528,8 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0 # # Self-contained MTD device drivers # +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -519,6 +560,7 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0 # # Plug and Play support # +# CONFIG_PNPACPI is not set # # Block devices @@ -530,14 +572,12 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # # Misc devices # -# CONFIG_TIFM_CORE is not set # # ATA/ATAPI/MFM/RLL support @@ -636,7 +676,26 @@ CONFIG_SMC91X=y # # Input device support # -# CONFIG_INPUT is not set +CONFIG_INPUT=m +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set # # Hardware I/O ports @@ -649,12 +708,14 @@ CONFIG_SMC91X=y # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF533_PFLAGS is not set +# CONFIG_BF5xx_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BF5xx_TIMERS is not set # CONFIG_BF5xx_PPI is not set -# CONFIG_BFIN_SPORT is not set +CONFIG_BFIN_SPORT=y # CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_AD5304 is not set +# CONFIG_BF5xx_FBDMA is not set # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set @@ -691,16 +752,19 @@ CONFIG_UNIX98_PTYS=y # # Watchdog Cards # -# CONFIG_WATCHDOG is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set CONFIG_BLACKFIN_DPMC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set # @@ -716,8 +780,19 @@ CONFIG_BLACKFIN_DPMC=y # # SPI support # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set # # Dallas's 1-wire bus @@ -731,10 +806,17 @@ CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_HWMON_DEBUG_CHIP is not set # +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -747,9 +829,8 @@ CONFIG_HWMON=y # # Graphics support # -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_FB is not set # # Sound @@ -757,6 +838,12 @@ CONFIG_FIRMWARE_EDID=y # CONFIG_SOUND is not set # +# HID Devices +# +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set + +# # USB support # CONFIG_USB_ARCH_HAS_HCD=y @@ -776,6 +863,7 @@ CONFIG_USB_ARCH_HAS_HCD=y # # MMC/SD Card support # +# CONFIG_SPI_MMC is not set # CONFIG_MMC is not set # @@ -821,8 +909,10 @@ CONFIG_RTC_INTF_DEV=y # # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_V3020 is not set CONFIG_RTC_DRV_BFIN=y @@ -840,6 +930,14 @@ CONFIG_RTC_DRV_BFIN=y # # +# Auxiliary Display support +# + +# +# Virtualization +# + +# # PBX support # # CONFIG_PBX is not set @@ -847,13 +945,9 @@ CONFIG_RTC_DRV_BFIN=y # # File systems # -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -# CONFIG_EXT2_FS_POSIX_ACL is not set -# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4DEV_FS is not set -CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -862,7 +956,8 @@ CONFIG_FS_MBCACHE=y # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set -# CONFIG_INOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set @@ -913,7 +1008,6 @@ CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 # CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set # CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y -# CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=m CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y @@ -945,7 +1039,8 @@ CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -961,7 +1056,51 @@ CONFIG_MSDOS_PARTITION=y # # Native Language Support # -# CONFIG_NLS is not set +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set # # Profiling support @@ -975,19 +1114,16 @@ CONFIG_MSDOS_PARTITION=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_UNWIND_INFO is not set -# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_SERIAL_EARLY_INIT is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set -# CONFIG_BOOTPARAM is not set -# CONFIG_NO_KERNEL_MSG is not set CONFIG_CPLB_INFO=y -# CONFIG_NO_ACCESS_CHECK is not set +CONFIG_ACCESS_CHECK=y # # Security options @@ -995,7 +1131,7 @@ CONFIG_CPLB_INFO=y # CONFIG_KEYS is not set CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=y +CONFIG_SECURITY_CAPABILITIES=m # # Cryptographic options @@ -1005,10 +1141,13 @@ CONFIG_SECURITY_CAPABILITIES=y # # Library routines # -# CONFIG_CRC_CCITT is not set +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index 14a948c..fee9189 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -1,12 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20.4 +# Linux kernel version: 2.6.21.3 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_ZONE_DMA=y CONFIG_BFIN=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -33,6 +34,7 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set @@ -41,6 +43,7 @@ CONFIG_SYSVIPC=y # CONFIG_IKCONFIG is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -55,9 +58,7 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_EPOLL=y CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -# CONFIG_LIMIT_PAGECACHE is not set CONFIG_BUDDY=y # CONFIG_NP2 is not set CONFIG_SLAB=y @@ -127,6 +128,7 @@ CONFIG_BFIN533_STAMP=y # CONFIG_BFIN537_BLUETECHNIX_CM is not set # CONFIG_BFIN561_BLUETECHNIX_CM is not set # CONFIG_BFIN561_EZKIT is not set +# CONFIG_BFIN561_TEPLA is not set # CONFIG_PNAV10 is not set # CONFIG_GENERIC_BOARD is not set CONFIG_MEM_MT48LC64M4A2FB_7E=y @@ -193,19 +195,6 @@ CONFIG_BFIN_IDLE_LED_PORT=0xFFC00700 CONFIG_BFIN_IDLE_LED_DPORT=0xFFC00730 # -# Console UART Setup -# -# CONFIG_BAUD_9600 is not set -# CONFIG_BAUD_19200 is not set -# CONFIG_BAUD_38400 is not set -CONFIG_BAUD_57600=y -# CONFIG_BAUD_115200 is not set -CONFIG_BAUD_NO_PARITY=y -# CONFIG_BAUD_PARITY is not set -CONFIG_BAUD_1_STOPBIT=y -# CONFIG_BAUD_2_STOPBIT is not set - -# # Blackfin Kernel Optimizations # @@ -233,6 +222,7 @@ CONFIG_MEMSET_L1=y CONFIG_MEMCPY_L1=y CONFIG_SYS_BFIN_SPINLOCK_L1=y # CONFIG_IP_CHECKSUM_L1 is not set +CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set CONFIG_RAMKERNEL=y @@ -246,6 +236,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 CONFIG_LARGE_ALLOCS=y CONFIG_BFIN_DMA_5XX=y # CONFIG_DMA_UNCACHED_2M is not set @@ -318,7 +309,7 @@ CONFIG_BINFMT_ZFLAT=y # Power management options # CONFIG_PM=y -CONFIG_PM_LEGACY=y +# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set # CONFIG_PM_SYSFS_DEPRECATED is not set CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y @@ -346,6 +337,7 @@ CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -580,6 +572,7 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0 # # Plug and Play support # +# CONFIG_PNPACPI is not set # # Block devices @@ -591,14 +584,12 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # # Misc devices # -# CONFIG_TIFM_CORE is not set # # ATA/ATAPI/MFM/RLL support @@ -733,7 +724,7 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=39 # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF533_PFLAGS is not set +# CONFIG_BF5xx_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BF5xx_TIMERS is not set # CONFIG_BF5xx_PPI is not set @@ -742,6 +733,8 @@ CONFIG_BFIN_SPORT=y CONFIG_TWI_LCD=m CONFIG_TWI_LCD_SLAVE_ADDR=34 # CONFIG_AD5304 is not set +# CONFIG_BF5xx_TEA5764 is not set +# CONFIG_BF5xx_FBDMA is not set # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set @@ -778,7 +771,14 @@ CONFIG_UNIX98_PTYS=y # # Watchdog Cards # -# CONFIG_WATCHDOG is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set CONFIG_BLACKFIN_DPMC=y @@ -840,12 +840,13 @@ CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # +CONFIG_SPI_BFIN=y # CONFIG_SPI_BITBANG is not set # # SPI Protocol Masters # -CONFIG_SPI_BFIN=y +# CONFIG_SPI_AT25 is not set # # Dallas's 1-wire bus @@ -861,6 +862,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set @@ -900,6 +902,11 @@ CONFIG_HWMON=y # CONFIG_HWMON_DEBUG_CHIP is not set # +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -912,15 +919,22 @@ CONFIG_HWMON=y # # Graphics support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set CONFIG_FB=m +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=m CONFIG_FB_CFB_COPYAREA=m CONFIG_FB_CFB_IMAGEBLIT=m +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# CONFIG_FB_BFIN_7171=m CONFIG_FB_BFIN_7393=m CONFIG_NTSC=y @@ -938,7 +952,6 @@ CONFIG_ADV7393_1XMEM=y # Logo configuration # # CONFIG_LOGO is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -971,6 +984,18 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_MPU401 is not set # +# ALSA Blackfin devices +# +# CONFIG_SND_BLACKFIN_AD1836 is not set +# CONFIG_SND_BLACKFIN_AD1981B is not set +# CONFIG_SND_BFIN_AD73311 is not set + +# +# SoC audio support +# +# CONFIG_SND_SOC is not set + +# # Open Sound System # # CONFIG_SOUND_PRIME is not set @@ -979,6 +1004,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # HID Devices # CONFIG_HID=y +# CONFIG_HID_DEBUG is not set # # USB support @@ -1051,7 +1077,6 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_M48T86 is not set @@ -1074,6 +1099,10 @@ CONFIG_RTC_DRV_BFIN=y # # +# Auxiliary Display support +# + +# # Virtualization # @@ -1085,13 +1114,9 @@ CONFIG_RTC_DRV_BFIN=y # # File systems # -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -# CONFIG_EXT2_FS_POSIX_ACL is not set -# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4DEV_FS is not set -CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -1103,7 +1128,7 @@ CONFIG_FS_MBCACHE=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1275,7 +1300,7 @@ CONFIG_ACCESS_CHECK=y # CONFIG_KEYS is not set CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=y +CONFIG_SECURITY_CAPABILITIES=m # # Cryptographic options @@ -1293,4 +1318,5 @@ CONFIG_CRC32=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y -CONFIG_IOMAP_COPY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index 8ed67dc4..37688bb 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -1,12 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20.4 +# Linux kernel version: 2.6.21.3 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_ZONE_DMA=y CONFIG_BFIN=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -33,6 +34,7 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set @@ -41,6 +43,7 @@ CONFIG_SYSVIPC=y # CONFIG_IKCONFIG is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -55,9 +58,7 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_EPOLL=y CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -# CONFIG_LIMIT_PAGECACHE is not set CONFIG_BUDDY=y # CONFIG_NP2 is not set CONFIG_SLAB=y @@ -127,6 +128,7 @@ CONFIG_BFIN537_STAMP=y # CONFIG_BFIN537_BLUETECHNIX_CM is not set # CONFIG_BFIN561_BLUETECHNIX_CM is not set # CONFIG_BFIN561_EZKIT is not set +# CONFIG_BFIN561_TEPLA is not set # CONFIG_PNAV10 is not set # CONFIG_GENERIC_BOARD is not set CONFIG_MEM_MT48LC32M8A2_75=y @@ -196,19 +198,6 @@ CONFIG_MEM_ADD_WIDTH=10 CONFIG_BOOT_LOAD=0x1000 # -# Console UART Setup -# -# CONFIG_BAUD_9600 is not set -# CONFIG_BAUD_19200 is not set -# CONFIG_BAUD_38400 is not set -CONFIG_BAUD_57600=y -# CONFIG_BAUD_115200 is not set -CONFIG_BAUD_NO_PARITY=y -# CONFIG_BAUD_PARITY is not set -CONFIG_BAUD_1_STOPBIT=y -# CONFIG_BAUD_2_STOPBIT is not set - -# # Blackfin Kernel Optimizations # @@ -236,6 +225,7 @@ CONFIG_MEMSET_L1=y CONFIG_MEMCPY_L1=y CONFIG_SYS_BFIN_SPINLOCK_L1=y # CONFIG_IP_CHECKSUM_L1 is not set +CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set CONFIG_RAMKERNEL=y @@ -249,6 +239,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 CONFIG_LARGE_ALLOCS=y CONFIG_BFIN_DMA_5XX=y # CONFIG_DMA_UNCACHED_2M is not set @@ -321,7 +312,7 @@ CONFIG_BINFMT_ZFLAT=y # Power management options # CONFIG_PM=y -CONFIG_PM_LEGACY=y +# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set # CONFIG_PM_SYSFS_DEPRECATED is not set CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y @@ -349,6 +340,7 @@ CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -593,6 +585,7 @@ CONFIG_MTD_NAND_IDS=m # # Plug and Play support # +# CONFIG_PNPACPI is not set # # Block devices @@ -604,14 +597,12 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # # Misc devices # -# CONFIG_TIFM_CORE is not set # # ATA/ATAPI/MFM/RLL support @@ -751,7 +742,7 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72 # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF533_PFLAGS is not set +# CONFIG_BF5xx_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BF5xx_TIMERS is not set # CONFIG_BF5xx_PPI is not set @@ -760,6 +751,8 @@ CONFIG_BFIN_SPORT=y CONFIG_TWI_LCD=m CONFIG_TWI_LCD_SLAVE_ADDR=34 # CONFIG_AD5304 is not set +# CONFIG_BF5xx_TEA5764 is not set +# CONFIG_BF5xx_FBDMA is not set # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set @@ -804,7 +797,14 @@ CONFIG_CAN_BLACKFIN=m # # Watchdog Cards # -# CONFIG_WATCHDOG is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set CONFIG_BLACKFIN_DPMC=y @@ -868,12 +868,13 @@ CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # +CONFIG_SPI_BFIN=y # CONFIG_SPI_BITBANG is not set # # SPI Protocol Masters # -CONFIG_SPI_BFIN=y +# CONFIG_SPI_AT25 is not set # # Dallas's 1-wire bus @@ -889,6 +890,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set @@ -928,6 +930,11 @@ CONFIG_HWMON=y # CONFIG_HWMON_DEBUG_CHIP is not set # +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -940,15 +947,24 @@ CONFIG_HWMON=y # # Graphics support # -CONFIG_FIRMWARE_EDID=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=m +CONFIG_LCD_CLASS_DEVICE=m CONFIG_FB=m +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=m CONFIG_FB_CFB_COPYAREA=m CONFIG_FB_CFB_IMAGEBLIT=m +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# CONFIG_FB_BFIN_7171=m CONFIG_FB_BFIN_7393=m CONFIG_NTSC=y @@ -970,11 +986,6 @@ CONFIG_LQ035_SLAVE_ADDR=0x58 # Logo configuration # # CONFIG_LOGO is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=m -CONFIG_BACKLIGHT_DEVICE=y -CONFIG_LCD_CLASS_DEVICE=m -CONFIG_LCD_DEVICE=y # # Sound @@ -1007,6 +1018,18 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_MPU401 is not set # +# ALSA Blackfin devices +# +# CONFIG_SND_BLACKFIN_AD1836 is not set +# CONFIG_SND_BLACKFIN_AD1981B is not set +# CONFIG_SND_BFIN_AD73311 is not set + +# +# SoC audio support +# +# CONFIG_SND_SOC is not set + +# # Open Sound System # # CONFIG_SOUND_PRIME is not set @@ -1015,6 +1038,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # HID Devices # CONFIG_HID=y +# CONFIG_HID_DEBUG is not set # # USB support @@ -1087,7 +1111,6 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_M48T86 is not set @@ -1110,6 +1133,10 @@ CONFIG_RTC_DRV_BFIN=y # # +# Auxiliary Display support +# + +# # Virtualization # @@ -1121,13 +1148,9 @@ CONFIG_RTC_DRV_BFIN=y # # File systems # -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -# CONFIG_EXT2_FS_POSIX_ACL is not set -# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4DEV_FS is not set -CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -1139,7 +1162,7 @@ CONFIG_FS_MBCACHE=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1311,7 +1334,7 @@ CONFIG_ACCESS_CHECK=y # CONFIG_KEYS is not set CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=y +CONFIG_SECURITY_CAPABILITIES=m # # Cryptographic options @@ -1329,4 +1352,5 @@ CONFIG_CRC32=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y -CONFIG_IOMAP_COPY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index e32ca20..fe4e67d 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -1,20 +1,21 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19.3 +# Linux kernel version: 2.6.21.3 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_ZONE_DMA=y CONFIG_BFIN=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +# CONFIG_GENERIC_TIME is not set CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_UCLINUX=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_IRQCHIP_DEMUX_GPIO=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -33,18 +34,21 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y -# CONFIG_UID16 is not set +CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -54,9 +58,7 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_EPOLL=y CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -# CONFIG_LIMIT_PAGECACHE is not set CONFIG_BUDDY=y # CONFIG_NP2 is not set CONFIG_SLAB=y @@ -80,7 +82,9 @@ CONFIG_KMOD=y # Block layer # CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -109,7 +113,6 @@ CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_BF532 is not set # CONFIG_BF533 is not set # CONFIG_BF534 is not set -# CONFIG_BF535 is not set # CONFIG_BF536 is not set # CONFIG_BF537 is not set CONFIG_BF561=y @@ -125,6 +128,7 @@ CONFIG_BFIN_DUAL_CORE=y # CONFIG_BFIN537_BLUETECHNIX_CM is not set # CONFIG_BFIN561_BLUETECHNIX_CM is not set CONFIG_BFIN561_EZKIT=y +# CONFIG_BFIN561_TEPLA is not set # CONFIG_PNAV10 is not set # CONFIG_GENERIC_BOARD is not set CONFIG_MEM_MT48LC16M16A2TG_75=y @@ -214,6 +218,7 @@ CONFIG_IRQ_WDTIMER=13 # # Board customizations # +# CONFIG_CMDLINE_BOOL is not set # # Board Setup @@ -224,19 +229,6 @@ CONFIG_MEM_ADD_WIDTH=9 CONFIG_BOOT_LOAD=0x1000 # -# Console UART Setup -# -# CONFIG_BAUD_9600 is not set -# CONFIG_BAUD_19200 is not set -# CONFIG_BAUD_38400 is not set -CONFIG_BAUD_57600=y -# CONFIG_BAUD_115200 is not set -CONFIG_BAUD_NO_PARITY=y -# CONFIG_BAUD_PARITY is not set -CONFIG_BAUD_1_STOPBIT=y -# CONFIG_BAUD_2_STOPBIT is not set - -# # Blackfin Kernel Optimizations # @@ -245,6 +237,7 @@ CONFIG_BAUD_1_STOPBIT=y # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 @@ -263,6 +256,7 @@ CONFIG_MEMSET_L1=y CONFIG_MEMCPY_L1=y CONFIG_SYS_BFIN_SPINLOCK_L1=y # CONFIG_IP_CHECKSUM_L1 is not set +CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set CONFIG_RAMKERNEL=y @@ -276,6 +270,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 CONFIG_LARGE_ALLOCS=y CONFIG_BFIN_DMA_5XX=y # CONFIG_DMA_UNCACHED_2M is not set @@ -368,6 +363,7 @@ CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -394,6 +390,7 @@ CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -437,7 +434,48 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +CONFIG_IRDA_CACHE_LAST_LSAP=y +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +CONFIG_IRTTY_SIR=m + +# +# Dongle support +# +# CONFIG_DONGLE is not set + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# # CONFIG_BT is not set # CONFIG_IEEE80211 is not set @@ -472,6 +510,7 @@ CONFIG_MTD_PARTITIONS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set @@ -528,6 +567,8 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0 # # Self-contained MTD device drivers # +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -558,6 +599,7 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0 # # Plug and Play support # +# CONFIG_PNPACPI is not set # # Block devices @@ -569,14 +611,12 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # # Misc devices # -# CONFIG_TIFM_CORE is not set # # ATA/ATAPI/MFM/RLL support @@ -675,7 +715,26 @@ CONFIG_SMC91X=y # # Input device support # -# CONFIG_INPUT is not set +CONFIG_INPUT=m +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set # # Hardware I/O ports @@ -688,12 +747,14 @@ CONFIG_SMC91X=y # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF533_PFLAGS is not set +# CONFIG_BF5xx_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BF5xx_TIMERS is not set # CONFIG_BF5xx_PPI is not set # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_AD5304 is not set +# CONFIG_BF5xx_FBDMA is not set # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set @@ -730,16 +791,19 @@ CONFIG_UNIX98_PTYS=y # # Watchdog Cards # -# CONFIG_WATCHDOG is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set # CONFIG_BLACKFIN_DPMC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set # @@ -755,8 +819,19 @@ CONFIG_HW_RANDOM=y # # SPI support # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set # # Dallas's 1-wire bus @@ -770,10 +845,17 @@ CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_HWMON_DEBUG_CHIP is not set # +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -786,9 +868,8 @@ CONFIG_HWMON=y # # Graphics support # -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_FB is not set # # Sound @@ -796,6 +877,12 @@ CONFIG_FIRMWARE_EDID=y # CONFIG_SOUND is not set # +# HID Devices +# +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set + +# # USB support # CONFIG_USB_ARCH_HAS_HCD=y @@ -815,6 +902,7 @@ CONFIG_USB_ARCH_HAS_HCD=y # # MMC/SD Card support # +# CONFIG_SPI_MMC is not set # CONFIG_MMC is not set # @@ -857,6 +945,14 @@ CONFIG_USB_ARCH_HAS_HCD=y # # +# Auxiliary Display support +# + +# +# Virtualization +# + +# # PBX support # # CONFIG_PBX is not set @@ -864,13 +960,9 @@ CONFIG_USB_ARCH_HAS_HCD=y # # File systems # -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -# CONFIG_EXT2_FS_POSIX_ACL is not set -# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4DEV_FS is not set -CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -882,7 +974,7 @@ CONFIG_FS_MBCACHE=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -931,7 +1023,6 @@ CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 # CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set # CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y -# CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=m CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y @@ -1022,6 +1113,11 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_UTF8 is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # # CONFIG_PROFILING is not set @@ -1033,20 +1129,17 @@ CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_UNWIND_INFO is not set -# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_SERIAL_EARLY_INIT is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set # CONFIG_DUAL_CORE_TEST_MODULE is not set -# CONFIG_BOOTPARAM is not set -# CONFIG_NO_KERNEL_MSG is not set CONFIG_CPLB_INFO=y -# CONFIG_NO_ACCESS_CHECK is not set +CONFIG_ACCESS_CHECK=y # # Security options @@ -1054,7 +1147,7 @@ CONFIG_CPLB_INFO=y # CONFIG_KEYS is not set CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=y +CONFIG_SECURITY_CAPABILITIES=m # # Cryptographic options @@ -1064,10 +1157,13 @@ CONFIG_SECURITY_CAPABILITIES=y # # Library routines # -# CONFIG_CRC_CCITT is not set +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig index 97b4ffa..a783ff6 100644 --- a/arch/blackfin/configs/PNAV-10_defconfig +++ b/arch/blackfin/configs/PNAV-10_defconfig @@ -1,20 +1,21 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19.3 +# Linux kernel version: 2.6.21.3 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_ZONE_DMA=y CONFIG_BFIN=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +# CONFIG_GENERIC_TIME is not set CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_UCLINUX=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_IRQCHIP_DEMUX_GPIO=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -33,14 +34,16 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -54,9 +57,7 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_EPOLL=y CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=9 -# CONFIG_LIMIT_PAGECACHE is not set CONFIG_BUDDY=y # CONFIG_NP2 is not set CONFIG_SLAB=y @@ -80,7 +81,9 @@ CONFIG_KMOD=y # Block layer # CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -109,7 +112,6 @@ CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_BF532 is not set # CONFIG_BF533 is not set # CONFIG_BF534 is not set -# CONFIG_BF535 is not set # CONFIG_BF536 is not set CONFIG_BF537=y # CONFIG_BF561 is not set @@ -125,6 +127,7 @@ CONFIG_BFIN_SINGLE_CORE=y # CONFIG_BFIN537_BLUETECHNIX_CM is not set # CONFIG_BFIN561_BLUETECHNIX_CM is not set # CONFIG_BFIN561_EZKIT is not set +# CONFIG_BFIN561_TEPLA is not set CONFIG_PNAV10=y # CONFIG_GENERIC_BOARD is not set CONFIG_MEM_MT48LC32M8A2_75=y @@ -183,6 +186,7 @@ CONFIG_IRQ_WATCH=13 # # Board customizations # +# CONFIG_CMDLINE_BOOL is not set # # Board Setup @@ -193,19 +197,6 @@ CONFIG_MEM_ADD_WIDTH=10 CONFIG_BOOT_LOAD=0x1000 # -# Console UART Setup -# -# CONFIG_BAUD_9600 is not set -# CONFIG_BAUD_19200 is not set -# CONFIG_BAUD_38400 is not set -# CONFIG_BAUD_57600 is not set -CONFIG_BAUD_115200=y -CONFIG_BAUD_NO_PARITY=y -# CONFIG_BAUD_PARITY is not set -CONFIG_BAUD_1_STOPBIT=y -# CONFIG_BAUD_2_STOPBIT is not set - -# # Blackfin Kernel Optimizations # @@ -214,6 +205,7 @@ CONFIG_BAUD_1_STOPBIT=y # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 @@ -232,6 +224,7 @@ CONFIG_MEMSET_L1=y CONFIG_MEMCPY_L1=y CONFIG_SYS_BFIN_SPINLOCK_L1=y CONFIG_IP_CHECKSUM_L1=y +CONFIG_CACHELINE_ALIGNED_L1=y CONFIG_SYSCALL_TAB_L1=y CONFIG_CPLB_SWITCH_TAB_L1=y CONFIG_RAMKERNEL=y @@ -245,6 +238,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 CONFIG_LARGE_ALLOCS=y CONFIG_BFIN_DMA_5XX=y # CONFIG_DMA_UNCACHED_2M is not set @@ -338,6 +332,7 @@ CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -364,6 +359,7 @@ CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -442,6 +438,7 @@ CONFIG_MTD_PARTITIONS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set @@ -522,6 +519,7 @@ CONFIG_MTD_NAND_IDS=y # # Plug and Play support # +# CONFIG_PNPACPI is not set # # Block devices @@ -533,14 +531,12 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # # Misc devices # -# CONFIG_TIFM_CORE is not set # # ATA/ATAPI/MFM/RLL support @@ -674,6 +670,7 @@ CONFIG_TOUCHSCREEN_AD7877=y # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set CONFIG_INPUT_MISC=y CONFIG_INPUT_UINPUT=y # CONFIG_BF53X_PFBUTTONS is not set @@ -690,7 +687,7 @@ CONFIG_INPUT_UINPUT=y # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF533_PFLAGS is not set +# CONFIG_BF5xx_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BF5xx_TIMERS is not set # CONFIG_BF5xx_PPI is not set @@ -699,6 +696,8 @@ CONFIG_BFIN_SPORT=y CONFIG_TWI_LCD=m CONFIG_TWI_LCD_SLAVE_ADDR=34 # CONFIG_AD5304 is not set +# CONFIG_BF5xx_TEA5764 is not set +# CONFIG_BF5xx_FBDMA is not set # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set @@ -750,10 +749,6 @@ CONFIG_HW_RANDOM=y CONFIG_BLACKFIN_DPMC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set # @@ -777,9 +772,9 @@ CONFIG_I2C_CHARDEV=y # # I2C Hardware Bus support # -# CONFIG_I2C_BFIN_GPIO is not set -CONFIG_I2C_BFIN_TWI=y -CONFIG_TWICLK_KHZ=50 +# CONFIG_I2C_BLACKFIN_GPIO is not set +CONFIG_I2C_BLACKFIN_TWI=y +CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_STUB is not set @@ -812,12 +807,13 @@ CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # -# CONFIG_SPI_BITBANG is not set CONFIG_SPI_BFIN=y +# CONFIG_SPI_BITBANG is not set # # SPI Protocol Masters # +# CONFIG_SPI_AT25 is not set # # Dallas's 1-wire bus @@ -833,6 +829,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set @@ -857,6 +854,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set @@ -864,12 +862,18 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -882,15 +886,24 @@ CONFIG_HWMON=y # # Graphics support # -CONFIG_FIRMWARE_EDID=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=y CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# # CONFIG_FB_BFIN_7171 is not set # CONFIG_FB_BFIN_7393 is not set CONFIG_FB_BF537_LQ035=y @@ -904,11 +917,6 @@ CONFIG_FB_BFIN_LANDSCAPE=y # Logo configuration # # CONFIG_LOGO is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_DEVICE=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_LCD_DEVICE=y # # Sound @@ -946,14 +954,24 @@ CONFIG_SND_BLACKFIN_AD1981B=m # CONFIG_SND_BFIN_AD73311 is not set # +# SoC audio support +# +# CONFIG_SND_SOC is not set + +# # Open Sound System # CONFIG_SOUND_PRIME=y -CONFIG_OSS_OBSOLETE_DRIVER=y +# CONFIG_OBSOLETE_OSS is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set # +# HID Devices +# +# CONFIG_HID is not set + +# # USB support # CONFIG_USB_ARCH_HAS_HCD=y @@ -1024,7 +1042,6 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_M48T86 is not set @@ -1047,6 +1064,14 @@ CONFIG_RTC_DRV_BFIN=y # # +# Auxiliary Display support +# + +# +# Virtualization +# + +# # PBX support # # CONFIG_PBX is not set @@ -1121,7 +1146,6 @@ CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 # CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set # CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y -# CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set @@ -1204,6 +1228,11 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_UTF8 is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # # CONFIG_PROFILING is not set @@ -1215,19 +1244,16 @@ CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_UNWIND_INFO is not set -# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_SERIAL_EARLY_INIT is not set # CONFIG_DEBUG_HUNT_FOR_ZERO is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set -# CONFIG_BOOTPARAM is not set -# CONFIG_NO_KERNEL_MSG is not set # CONFIG_CPLB_INFO is not set -# CONFIG_NO_ACCESS_CHECK is not set +# CONFIG_ACCESS_CHECK is not set # # Security options @@ -1245,9 +1271,12 @@ CONFIG_SECURITY_CAPABILITIES=y # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y -- cgit v0.10.2 From 83a5c3e3218f138b1a99f787c76e380d6a6ecec9 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 11 Jun 2007 15:31:30 +0800 Subject: Blackfin arch: unify differences between our diff head.S files -- no functional changes Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index 4db9e62..33d1f62 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -51,13 +51,14 @@ ENTRY(__start) ENTRY(__stext) /* R0: argument of command line string, passed from uboot, save it */ R7 = R0; - /* Set the SYSCFG register */ + /* Set the SYSCFG register: + * Enable Cycle Counter and Nesting Of Interrupts (3rd Bit) + */ R0 = 0x36; - /*Enable Cycle Counter and Nesting Of Interrupts(3rd Bit)*/ SYSCFG = R0; R0 = 0; - /*Clear Out All the data and pointer Registers*/ + /* Clear Out All the data and pointer Registers */ R1 = R0; R2 = R0; R3 = R0; @@ -79,7 +80,7 @@ ENTRY(__stext) L2 = r0; L3 = r0; - /* Clear Out All the DAG Registers*/ + /* Clear Out All the DAG Registers */ B0 = r0; B1 = r0; B2 = r0; @@ -303,7 +304,7 @@ ENTRY(_real_start) .L_clear_zero: W[p1++] = r0; -/* pass the uboot arguments to the global value command line */ + /* pass the uboot arguments to the global value command line */ R0 = R7; call _cmdline_init; @@ -322,7 +323,7 @@ ENTRY(_real_start) [p1] = r1; /* - * load the current thread pointer and stack + * load the current thread pointer and stack */ r1.l = _init_thread_union; r1.h = _init_thread_union; @@ -439,8 +440,8 @@ ENTRY(_start_dma_code) p0.h = hi(SIC_IWR); p0.l = lo(SIC_IWR); - r0.l = lo(IWR_ENABLE_ALL) - r0.h = hi(IWR_ENABLE_ALL) + r0.l = lo(IWR_ENABLE_ALL); + r0.h = hi(IWR_ENABLE_ALL); [p0] = r0; SSYNC; diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S index 2c2652b..3f490bf 100644 --- a/arch/blackfin/mach-bf537/head.S +++ b/arch/blackfin/mach-bf537/head.S @@ -40,7 +40,7 @@ .extern ___bss_start .extern _bf53x_relocate_l1_mem -#define INITIAL_STACK 0xFFB01000 +#define INITIAL_STACK 0xFFB01000 .text @@ -48,12 +48,14 @@ ENTRY(__start) ENTRY(__stext) /* R0: argument of command line string, passed from uboot, save it */ R7 = R0; - /* Set the SYSCFG register */ + /* Set the SYSCFG register: + * Enable Cycle Counter and Nesting Of Interrupts (3rd Bit) + */ R0 = 0x36; - SYSCFG = R0; /*Enable Cycle Counter and Nesting Of Interrupts(3rd Bit)*/ + SYSCFG = R0; R0 = 0; - /* Clear Out All the data and pointer Registers*/ + /* Clear Out All the data and pointer Registers */ R1 = R0; R2 = R0; R3 = R0; @@ -75,7 +77,7 @@ ENTRY(__stext) L2 = r0; L3 = r0; - /* Clear Out All the DAG Registers*/ + /* Clear Out All the DAG Registers */ B0 = r0; B1 = r0; B2 = r0; @@ -191,7 +193,7 @@ ENTRY(__stext) p0.h = hi(UART_DLL); p0.l = lo(UART_DLL); - r0 = 0x00(Z); + r0 = 0x0(Z); w[p0] = r0.L; ssync; @@ -218,6 +220,7 @@ ENTRY(__stext) #if CONFIG_BFIN_KERNEL_CLOCK call _start_dma_code; #endif + /* Code for initializing Async memory banks */ p2.h = hi(EBIU_AMBCTL1); @@ -291,7 +294,7 @@ ENTRY(_real_start) p2.h = ___bss_stop; r0 = 0; p2 -= p1; - lsetup (.L_clear_bss, .L_clear_bss ) lc0 = p2; + lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2; .L_clear_bss: B[p1++] = r0; @@ -306,7 +309,7 @@ ENTRY(_real_start) r0 = r0 >> 1; p2 = r0; r0 = 0; - lsetup (.L_clear_zero, .L_clear_zero ) lc0 = p2; + lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2; .L_clear_zero: W[p1++] = r0; @@ -328,9 +331,8 @@ ENTRY(_real_start) r1 = p3; [p1] = r1; - /* - * load the current thread pointer and stack + * load the current thread pointer and stack */ r1.l = _init_thread_union; r1.h = _init_thread_union; diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S index ad9187a..3029e94 100644 --- a/arch/blackfin/mach-bf561/head.S +++ b/arch/blackfin/mach-bf561/head.S @@ -46,14 +46,16 @@ ENTRY(__start) ENTRY(__stext) - /* R0: argument of command line string, passed from uboot, save it */ + /* R0: argument of command line string, passed from uboot, save it */ R7 = R0; - /* Set the SYSCFG register */ + /* Set the SYSCFG register: + * Enable Cycle Counter and Nesting Of Interrupts (3rd Bit) + */ R0 = 0x36; - SYSCFG = R0; /*Enable Cycle Counter and Nesting Of Interrupts(3rd Bit)*/ + SYSCFG = R0; R0 = 0; - /*Clear Out All the data and pointer Registers*/ + /* Clear Out All the data and pointer Registers */ R1 = R0; R2 = R0; R3 = R0; @@ -75,7 +77,7 @@ ENTRY(__stext) L2 = r0; L3 = r0; - /* Clear Out All the DAG Registers*/ + /* Clear Out All the DAG Registers */ B0 = r0; B1 = r0; B2 = r0; @@ -238,7 +240,7 @@ ENTRY(_real_start) p2.h = ___bss_stop; r0 = 0; p2 -= p1; - lsetup (.L_clear_bss, .L_clear_bss ) lc0 = p2; + lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2; .L_clear_bss: B[p1++] = r0; @@ -253,11 +255,11 @@ ENTRY(_real_start) r0 = r0 >> 1; p2 = r0; r0 = 0; - lsetup (.L_clear_zero, .L_clear_zero ) lc0 = p2; + lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2; .L_clear_zero: W[p1++] = r0; -/* pass the uboot arguments to the global value command line */ + /* pass the uboot arguments to the global value command line */ R0 = R7; call _cmdline_init; @@ -350,7 +352,7 @@ ENTRY(_start_dma_code) if ! CC jump .Lcheck_again; /* Configure SCLK & CCLK Dividers */ - r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); + r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); p0.h = hi(PLL_DIV); p0.l = lo(PLL_DIV); w[p0] = r0.l; -- cgit v0.10.2 From 52a078120c33b06a9abb721357adaafc3b55b7c1 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 11 Jun 2007 15:31:30 +0800 Subject: Blackfin arch: move more of our startup code to .init so it can be freed once we are up and running Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 02dc743..d9517e7 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -90,7 +90,7 @@ void __init bf53x_cache_init(void) #endif } -void bf53x_relocate_l1_mem(void) +void __init bf53x_relocate_l1_mem(void) { unsigned long l1_code_length; unsigned long l1_data_a_length; @@ -411,7 +411,7 @@ static int __init topology_init(void) subsys_initcall(topology_init); #if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE) -u16 lock_kernel_check(u32 start, u32 end) +static u16 __init lock_kernel_check(u32 start, u32 end) { if ((start <= (u32) _stext && end >= (u32) _end) || (start >= (u32) _stext && end <= (u32) _end)) @@ -681,7 +681,7 @@ static void __init generate_cpl_tables(void) #endif -static inline u_long get_vco(void) +static u_long get_vco(void) { u_long msel; u_long vco; @@ -889,8 +889,8 @@ struct seq_operations cpuinfo_op = { .show = show_cpuinfo, }; -void cmdline_init(unsigned long r0) +void __init cmdline_init(char *r0) { if (r0) - strncpy(command_line, (char *)r0, COMMAND_LINE_SIZE); + strncpy(command_line, r0, COMMAND_LINE_SIZE); } diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index 33d1f62..7e2aa8d 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -28,6 +28,7 @@ */ #include +#include #include #if CONFIG_BFIN_KERNEL_CLOCK #include @@ -45,10 +46,9 @@ #define INITIAL_STACK 0xFFB01000 -.text +__INIT ENTRY(__start) -ENTRY(__stext) /* R0: argument of command line string, passed from uboot, save it */ R7 = R0; /* Set the SYSCFG register: @@ -266,6 +266,7 @@ ENTRY(__stext) .LWAIT_HERE: jump .LWAIT_HERE; +ENDPROC(__start) ENTRY(_real_start) [ -- sp ] = reti; @@ -334,9 +335,10 @@ ENTRY(_real_start) sp = r1; usp = sp; fp = sp; - call _start_kernel; -.L_exit: - jump.s .L_exit; + jump.l _start_kernel; +ENDPROC(_real_start) + +__FINIT .section .l1.text #if CONFIG_BFIN_KERNEL_CLOCK @@ -446,6 +448,7 @@ ENTRY(_start_dma_code) SSYNC; RTS; +ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ ENTRY(_bfin_reset) diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S index 3f490bf..7d902bb 100644 --- a/arch/blackfin/mach-bf537/head.S +++ b/arch/blackfin/mach-bf537/head.S @@ -28,6 +28,7 @@ */ #include +#include #include #if CONFIG_BFIN_KERNEL_CLOCK #include @@ -42,10 +43,9 @@ #define INITIAL_STACK 0xFFB01000 -.text +__INIT ENTRY(__start) -ENTRY(__stext) /* R0: argument of command line string, passed from uboot, save it */ R7 = R0; /* Set the SYSCFG register: @@ -275,6 +275,7 @@ ENTRY(__stext) .LWAIT_HERE: jump .LWAIT_HERE; +ENDPROC(__start) ENTRY(_real_start) [ -- sp ] = reti; @@ -343,9 +344,10 @@ ENTRY(_real_start) sp = r1; usp = sp; fp = sp; - call _start_kernel; -.L_exit: - jump.s .L_exit; + jump.l _start_kernel; +ENDPROC(_real_start) + +__FINIT .section .l1.text #if CONFIG_BFIN_KERNEL_CLOCK @@ -464,6 +466,7 @@ ENTRY(_start_dma_code) SSYNC; RTS; +ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ ENTRY(_bfin_reset) diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S index 3029e94..31cbc75 100644 --- a/arch/blackfin/mach-bf561/head.S +++ b/arch/blackfin/mach-bf561/head.S @@ -28,6 +28,7 @@ */ #include +#include #include #if CONFIG_BFIN_KERNEL_CLOCK #include @@ -42,10 +43,9 @@ #define INITIAL_STACK 0xFFB01000 -.text +__INIT ENTRY(__start) -ENTRY(__stext) /* R0: argument of command line string, passed from uboot, save it */ R7 = R0; /* Set the SYSCFG register: @@ -221,6 +221,7 @@ ENTRY(__stext) .LWAIT_HERE: jump .LWAIT_HERE; +ENDPROC(__start) ENTRY(_real_start) [ -- sp ] = reti; @@ -289,9 +290,10 @@ ENTRY(_real_start) sp = r1; usp = sp; fp = sp; - call _start_kernel; -.L_exit: - jump.s .L_exit; + jump.l _start_kernel; +ENDPROC(_real_start) + +__FINIT .section .l1.text #if CONFIG_BFIN_KERNEL_CLOCK @@ -393,6 +395,7 @@ ENTRY(_start_dma_code) SSYNC; RTS; +ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ ENTRY(_bfin_reset) -- cgit v0.10.2 From 51be24c351bc9ee4937121100adb098eeb1effdd Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 11 Jun 2007 15:31:30 +0800 Subject: Blackfin arch: add proper ENDPROC() add proper ENDPROC() to close out assembly functions so size/type is set properly in the final ELF image Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S index 5880b27..65c5ba4 100644 --- a/arch/blackfin/kernel/entry.S +++ b/arch/blackfin/kernel/entry.S @@ -58,10 +58,12 @@ ENTRY(_ret_from_fork) RESTORE_ALL_SYS p0 = reti; jump (p0); +ENDPROC(_ret_from_fork) ENTRY(_sys_fork) r0 = -EINVAL; rts; +ENDPROC(_sys_fork) ENTRY(_sys_vfork) r0 = sp; @@ -72,6 +74,7 @@ ENTRY(_sys_vfork) SP += 12; rets = [sp++]; rts; +ENDPROC(_sys_vfork) ENTRY(_sys_clone) r0 = sp; @@ -82,6 +85,7 @@ ENTRY(_sys_clone) SP += 12; rets = [sp++]; rts; +ENDPROC(_sys_clone) ENTRY(_sys_rt_sigreturn) r0 = sp; @@ -92,3 +96,4 @@ ENTRY(_sys_rt_sigreturn) SP += 12; rets = [sp++]; rts; +ENDPROC(_sys_rt_sigreturn) diff --git a/arch/blackfin/lib/divsi3.S b/arch/blackfin/lib/divsi3.S index 3e29861..2ac59c7 100644 --- a/arch/blackfin/lib/divsi3.S +++ b/arch/blackfin/lib/divsi3.S @@ -44,6 +44,7 @@ */ .global ___divsi3; +.type ___divsi3, STT_FUNC; #ifdef CONFIG_ARITHMETIC_OPS_L1 .section .l1.text @@ -214,3 +215,5 @@ ___divsi3 : .Lret_zero: R0 = 0; RTS; + +.size ___divsi3, .-___divsi3 diff --git a/arch/blackfin/lib/ins.S b/arch/blackfin/lib/ins.S index 7d5e984..a17cc77 100644 --- a/arch/blackfin/lib/ins.S +++ b/arch/blackfin/lib/ins.S @@ -46,7 +46,7 @@ ENTRY(_insl) .Llong_loop_e: NOP; sti R3; RTS; - +ENDPROC(_insl) ENTRY(_insw) P0 = R0; /* P0 = port */ @@ -61,6 +61,7 @@ ENTRY(_insw) .Lword_loop_e: NOP; sti R3; RTS; +ENDPROC(_insw) ENTRY(_insb) P0 = R0; /* P0 = port */ @@ -75,3 +76,4 @@ ENTRY(_insb) .Lbyte_loop_e: NOP; sti R3; RTS; +ENDPROC(_insb) diff --git a/arch/blackfin/lib/memchr.S b/arch/blackfin/lib/memchr.S index 4981222..5da4281 100644 --- a/arch/blackfin/lib/memchr.S +++ b/arch/blackfin/lib/memchr.S @@ -67,4 +67,4 @@ ENTRY(_memchr) R0 += -1; RTS; -.size _memchr,.-_memchr +ENDPROC(_memchr) diff --git a/arch/blackfin/lib/memcmp.S b/arch/blackfin/lib/memcmp.S index 5b95023..a6b8ee6 100644 --- a/arch/blackfin/lib/memcmp.S +++ b/arch/blackfin/lib/memcmp.S @@ -107,4 +107,4 @@ ENTRY(_memcmp) P3 = I1; RTS; -.size _memcmp,.-_memcmp +ENDPROC(_memcmp) diff --git a/arch/blackfin/lib/memcpy.S b/arch/blackfin/lib/memcpy.S index c1e00ef..34b5a91 100644 --- a/arch/blackfin/lib/memcpy.S +++ b/arch/blackfin/lib/memcpy.S @@ -140,3 +140,5 @@ ENTRY(_memcpy) B[P0--] = R1; RTS; + +ENDPROC(_memcpy) diff --git a/arch/blackfin/lib/memmove.S b/arch/blackfin/lib/memmove.S index 2e5fb7f..c371585 100644 --- a/arch/blackfin/lib/memmove.S +++ b/arch/blackfin/lib/memmove.S @@ -100,4 +100,4 @@ ENTRY(_memmove) P3 = I1; RTS; -.size _memmove,.-_memmove +ENDPROC(_memmove) diff --git a/arch/blackfin/lib/memset.S b/arch/blackfin/lib/memset.S index ba6d047..8159136 100644 --- a/arch/blackfin/lib/memset.S +++ b/arch/blackfin/lib/memset.S @@ -106,4 +106,4 @@ ENTRY(_memset) B[P0++] = R1; JUMP .Laligned; -.size _memset,.-_memset +ENDPROC(_memset) diff --git a/arch/blackfin/lib/modsi3.S b/arch/blackfin/lib/modsi3.S index 528b8b1..ca1dd39 100644 --- a/arch/blackfin/lib/modsi3.S +++ b/arch/blackfin/lib/modsi3.S @@ -77,3 +77,5 @@ ___modsi3: R0 = 0; .LRETURN_R0: RTS; + +.size ___modsi3, .-___modsi3 diff --git a/arch/blackfin/lib/outs.S b/arch/blackfin/lib/outs.S index f8c876f..4c3da8a 100644 --- a/arch/blackfin/lib/outs.S +++ b/arch/blackfin/lib/outs.S @@ -40,6 +40,7 @@ ENTRY(_outsl) .Llong_loop_s: R0 = [P1++]; .Llong_loop_e: [P0] = R0; RTS; +ENDPROC(_outsl) ENTRY(_outsw) P0 = R0; /* P0 = port */ @@ -50,6 +51,7 @@ ENTRY(_outsw) .Lword_loop_s: R0 = W[P1++]; .Lword_loop_e: W[P0] = R0; RTS; +ENDPROC(_outsw) ENTRY(_outsb) P0 = R0; /* P0 = port */ @@ -60,3 +62,4 @@ ENTRY(_outsb) .Lbyte_loop_s: R0 = B[P1++]; .Lbyte_loop_e: B[P0] = R0; RTS; +ENDPROC(_outsb) diff --git a/arch/blackfin/lib/smulsi3_highpart.S b/arch/blackfin/lib/smulsi3_highpart.S index 10b8f8d..e383cd3 100644 --- a/arch/blackfin/lib/smulsi3_highpart.S +++ b/arch/blackfin/lib/smulsi3_highpart.S @@ -28,3 +28,5 @@ ___smulsi3_highpart: R0 = R0 + R1; RTS; + +.size ___smulsi3_highpart, .-___smulsi3_highpart diff --git a/arch/blackfin/lib/udivsi3.S b/arch/blackfin/lib/udivsi3.S index d39a129..58fd96d 100644 --- a/arch/blackfin/lib/udivsi3.S +++ b/arch/blackfin/lib/udivsi3.S @@ -296,3 +296,5 @@ ENTRY(___udivsi3) R1 = R0 - R3; IF CC R0 = R1; RTS; + +ENDPROC(___udivsi3) diff --git a/arch/blackfin/lib/umodsi3.S b/arch/blackfin/lib/umodsi3.S index b55ce96..4f2b76e 100644 --- a/arch/blackfin/lib/umodsi3.S +++ b/arch/blackfin/lib/umodsi3.S @@ -34,7 +34,9 @@ #endif .extern ___udivsi3; +.type ___udivsi3, STT_FUNC; .globl ___umodsi3 +.type ___umodsi3, STT_FUNC; ___umodsi3: CC=R0==0; @@ -64,3 +66,5 @@ ___umodsi3: R0 = 0; .LRETURN_R0: RTS; + +.size ___umodsi3, .-___umodsi3 diff --git a/arch/blackfin/lib/umulsi3_highpart.S b/arch/blackfin/lib/umulsi3_highpart.S index aac8218..67b7993 100644 --- a/arch/blackfin/lib/umulsi3_highpart.S +++ b/arch/blackfin/lib/umulsi3_highpart.S @@ -21,3 +21,5 @@ ___umulsi3_highpart: R1 = PACK(R1.l,R0.h); R0 = R1 + R2; RTS; + +.size ___umulsi3_highpart, .-___umulsi3_highpart diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S index bb9446e..8bd2af1 100644 --- a/arch/blackfin/mach-common/cache.S +++ b/arch/blackfin/mach-common/cache.S @@ -70,6 +70,7 @@ ENTRY(_cache_invalidate) .Lno_dcache_b: R7 = [SP++]; RTS; +ENDPROC(_cache_invalidate) /* Invalidate the Entire Instruction cache by * disabling IMC bit @@ -106,6 +107,8 @@ ENTRY(_invalidate_entire_icache) ( R7:5) = [SP++]; RTS; +ENDPROC(_invalidate_entire_icache) +ENDPROC(_icache_invalidate) /* * blackfin_cache_flush_range(start, end) @@ -129,6 +132,7 @@ ENTRY(_blackfin_icache_flush_range) IFLUSH [P0]; SSYNC; RTS; +ENDPROC(_blackfin_icache_flush_range) /* * blackfin_icache_dcache_flush_range(start, end) @@ -155,6 +159,7 @@ ENTRY(_blackfin_icache_dcache_flush_range) FLUSH [P0]; SSYNC; RTS; +ENDPROC(_blackfin_icache_dcache_flush_range) /* Throw away all D-cached data in specified region without any obligation to * write them back. However, we must clean the D-cached entries around the @@ -183,6 +188,7 @@ ENTRY(_blackfin_dcache_invalidate_range) FLUSHINV[P0]; SSYNC; RTS; +ENDPROC(_blackfin_dcache_invalidate_range) /* Invalidate the Entire Data cache by * clearing DMC[1:0] bits @@ -221,6 +227,8 @@ ENTRY(_dcache_invalidate) ( R7:6) = [SP++]; RTS; +ENDPROC(_dcache_invalidate) +ENDPROC(_invalidate_entire_dcache) ENTRY(_blackfin_dcache_flush_range) R2 = -L1_CACHE_BYTES; @@ -241,6 +249,7 @@ ENTRY(_blackfin_dcache_flush_range) FLUSH[P0]; SSYNC; RTS; +ENDPROC(_blackfin_dcache_flush_range) ENTRY(_blackfin_dflush_page) P1 = 1 << (PAGE_SHIFT - L1_CACHE_SHIFT); @@ -251,3 +260,4 @@ ENTRY(_blackfin_dflush_page) .Lfl1: FLUSH [P0++]; SSYNC; RTS; +ENDPROC(_blackfin_dflush_page) diff --git a/arch/blackfin/mach-common/cacheinit.S b/arch/blackfin/mach-common/cacheinit.S index 8c17f09..7924a90 100644 --- a/arch/blackfin/mach-common/cacheinit.S +++ b/arch/blackfin/mach-common/cacheinit.S @@ -86,6 +86,8 @@ ENTRY(_bfin_icache_init) SSYNC; STI R2; RTS; + +ENDPROC(_bfin_icache_init) #endif #if defined(CONFIG_BLKFIN_DCACHE) @@ -134,4 +136,6 @@ ENTRY(_bfin_dcache_init) SSYNC; STI R2; RTS; + +ENDPROC(_bfin_dcache_init) #endif diff --git a/arch/blackfin/mach-common/cplbhdlr.S b/arch/blackfin/mach-common/cplbhdlr.S index b979067..2f3c72c 100644 --- a/arch/blackfin/mach-common/cplbhdlr.S +++ b/arch/blackfin/mach-common/cplbhdlr.S @@ -42,8 +42,6 @@ .align 2 -.global __cplb_hdr; -.type __cplb_hdr, STT_FUNC; ENTRY(__cplb_hdr) R2 = SEQSTAT; @@ -128,3 +126,5 @@ ENTRY(__cplb_hdr) call _panic_cplb_error; SP += 12; JUMP _handle_bad_cplb; + +ENDPROC(__cplb_hdr) diff --git a/arch/blackfin/mach-common/cplbmgr.S b/arch/blackfin/mach-common/cplbmgr.S index f5efc4b..e4b47e0 100644 --- a/arch/blackfin/mach-common/cplbmgr.S +++ b/arch/blackfin/mach-common/cplbmgr.S @@ -592,6 +592,7 @@ ENTRY(_cplb_mgr) ( R7:4,P5:3 ) = [SP++]; R0 = CPLB_RELOADED; RTS; +ENDPROC(_cplb_mgr) .data .align 4; diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 7d03687..40045b1 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -103,6 +103,7 @@ ENTRY(_ex_dcplb) if !cc jump _return_from_exception; /* fall through */ #endif +ENDPROC(_ex_dcplb) ENTRY(_ex_icplb) (R7:6,P5:4) = [sp++]; @@ -113,6 +114,7 @@ ENTRY(_ex_icplb) RESTORE_ALL_SYS SP = RETN; rtx; +ENDPROC(_ex_icplb) ENTRY(_ex_spinlock) /* Transform this into a syscall - twiddle the syscall vector. */ @@ -123,6 +125,7 @@ ENTRY(_ex_spinlock) [p5] = r7; csync; /* Fall through. */ +ENDPROC(_ex_spinlock) ENTRY(_ex_syscall) DEBUG_START_HWTRACE @@ -131,6 +134,7 @@ ENTRY(_ex_syscall) raise 15; /* invoked by TRAP #0, for sys call */ sp = retn; rtx +ENDPROC(_ex_syscall) ENTRY(_spinlock_bh) SAVE_ALL_SYS @@ -150,12 +154,14 @@ ENTRY(_spinlock_bh) [SP + PT_R0] = R0; RESTORE_ALL_SYS rti; +ENDPROC(_spinlock_bh) ENTRY(_ex_soft_bp) r7 = retx; r7 += -2; retx = r7; jump.s _ex_trap_c; +ENDPROC(_ex_soft_bp) ENTRY(_ex_single_step) r7 = retx; @@ -191,6 +197,7 @@ _return_from_exception: ASTAT = [sp++]; sp = retn; rtx; +ENDPROC(_ex_soft_bp) ENTRY(_handle_bad_cplb) /* To get here, we just tried and failed to change a CPLB @@ -250,6 +257,7 @@ ENTRY(_ex_trap_c) SP = RETN; raise 5; rtx; +ENDPROC(_ex_trap_c) ENTRY(_exception_to_level5) SAVE_ALL_SYS @@ -314,6 +322,7 @@ ENTRY(_exception_to_level5) call _ret_from_exception; RESTORE_ALL_SYS rti; +ENDPROC(_exception_to_level5) ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/ /* Since the kernel stack can be anywhere, it's not guaranteed to be @@ -342,6 +351,7 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/ r7 = -ENOSYS; /* signextending enough */ [sp + PT_R0] = r7; /* return value from system call */ jump .Lsyscall_really_exit; +ENDPROC(_trap) ENTRY(_kernel_execve) link SIZEOF_PTREGS; @@ -396,6 +406,7 @@ ENTRY(_kernel_execve) 1: unlink; rts; +ENDPROC(_kernel_execve) ENTRY(_system_call) /* Store IPEND */ @@ -503,6 +514,7 @@ ENTRY(_system_call) r5 = [sp + PT_RESERVED]; rets = r5; rts; +ENDPROC(_system_call) _sys_trace: call _syscall_trace; @@ -531,6 +543,7 @@ _sys_trace: call _syscall_trace; jump .Lresume_userspace; +ENDPROC(_sys_trace) ENTRY(_resume) /* @@ -580,6 +593,7 @@ _new_old_task: * in "new" task. */ rts; +ENDPROC(_resume) ENTRY(_ret_from_exception) p2.l = lo(IPEND); @@ -638,6 +652,7 @@ ENTRY(_ret_from_exception) syscfg = r0; 5: rts; +ENDPROC(_ret_from_exception) ENTRY(_return_from_int) /* If someone else already raised IRQ 15, do nothing. */ @@ -680,6 +695,7 @@ ENTRY(_return_from_int) rti; 2: rts; +ENDPROC(_return_from_int) ENTRY(_lower_to_irq14) #if defined(ANOMALY_05000281) @@ -745,6 +761,7 @@ _schedule_and_signal: 1: RESTORE_CONTEXT rti; +ENDPROC(_lower_to_irq14) /* Make sure when we start, that the circular buffer is initialized properly * R0 and P0 are call clobbered, so we can use them here. @@ -758,6 +775,7 @@ ENTRY(_init_exception_buff) p0.l = _out_ptr_excause; [p0] = r0; rts; +ENDPROC(_init_exception_buff) /* * Put these in the kernel data section - that should always be covered by diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S index dd45664..b69f517 100644 --- a/arch/blackfin/mach-common/interrupt.S +++ b/arch/blackfin/mach-common/interrupt.S @@ -66,6 +66,7 @@ ENTRY(_evt_emulation) SP += 12; /* - GDB stub fills this in by itself (if defined) */ rte; +ENDPROC(_evt_emulation) #endif /* Common interrupt entry code. First we do CLI, then push @@ -251,3 +252,4 @@ ENTRY(_evt_system_call) #endif call _system_call; jump .Lcommon_restore_context; +ENDPROC(_evt_system_call) diff --git a/arch/blackfin/mach-common/lock.S b/arch/blackfin/mach-common/lock.S index 2cbb15b..386ac8d 100644 --- a/arch/blackfin/mach-common/lock.S +++ b/arch/blackfin/mach-common/lock.S @@ -155,6 +155,7 @@ ENTRY(_cache_grab_lock) ( R7:0,P5:0 ) = [SP++]; RTS; +ENDPROC(_cache_grab_lock) /* After the execution of critical code, the code is now locked into * the cache way. Now we need to set ILOC. @@ -186,6 +187,7 @@ ENTRY(_cache_lock) ( R7:0,P5:0 ) = [SP++]; RTS; +ENDPROC(_cache_lock) #endif /* BLKFIN_CACHE_LOCK */ @@ -193,7 +195,6 @@ ENTRY(_cache_lock) */ ENTRY(_read_iloc) - P1.H = (IMEM_CONTROL >> 16); P1.L = (IMEM_CONTROL & 0xFFFF); R1 = 0xF; @@ -202,3 +203,4 @@ ENTRY(_read_iloc) R0 = R0 & R1; RTS; +ENDPROC(_read_iloc) -- cgit v0.10.2 From 5af4c2b367c9c3dcc0cb02880df3a8581bb12a87 Mon Sep 17 00:00:00 2001 From: Aubrey Li Date: Thu, 14 Jun 2007 13:28:47 +0800 Subject: Blackfin arch: try to split up functions like this into smaller units according to LKML review Signed-off-by: Aubrey Li Signed-off-by: Bryan Wu diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index d9517e7..0ba5f4a 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -471,6 +471,67 @@ close_cplbtab(struct cplb_tab *table) return 0; } +/* helper function */ +static void __fill_code_cplbtab(struct cplb_tab *t, int i, + u32 a_start, u32 a_end) +{ + if (cplb_data[i].psize) { + fill_cplbtab(t, + cplb_data[i].start, + cplb_data[i].end, + cplb_data[i].psize, + cplb_data[i].i_conf); + } else { +#if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263)) + if (i == SDRAM_KERN) { + fill_cplbtab(t, + cplb_data[i].start, + cplb_data[i].end, + SIZE_4M, + cplb_data[i].i_conf); + } else { +#endif + fill_cplbtab(t, + cplb_data[i].start, + a_start, + SIZE_1M, + cplb_data[i].i_conf); + fill_cplbtab(t, + a_start, + a_end, + SIZE_4M, + cplb_data[i].i_conf); + fill_cplbtab(t, a_end, + cplb_data[i].end, + SIZE_1M, + cplb_data[i].i_conf); + } + } +} + +static void __fill_data_cplbtab(struct cplb_tab *t, int i, + u32 a_start, u32 a_end) +{ + if (cplb_data[i].psize) { + fill_cplbtab(t, + cplb_data[i].start, + cplb_data[i].end, + cplb_data[i].psize, + cplb_data[i].d_conf); + } else { + fill_cplbtab(t, + cplb_data[i].start, + a_start, SIZE_1M, + cplb_data[i].d_conf); + fill_cplbtab(t, a_start, + a_end, SIZE_4M, + cplb_data[i].d_conf); + fill_cplbtab(t, a_end, + cplb_data[i].end, + SIZE_1M, + cplb_data[i].d_conf); + } +} static void __init generate_cpl_tables(void) { @@ -540,130 +601,78 @@ static void __init generate_cpl_tables(void) cplb_data[RES_MEM].i_conf = SDRAM_INON_CHBL; for (i = ZERO_P; i <= L2_MEM; i++) { + if (!cplb_data[i].valid) + continue; - if (cplb_data[i].valid) { + as_1m = cplb_data[i].start % SIZE_1M; - as_1m = cplb_data[i].start % SIZE_1M; + /* + * We need to make sure all sections are properly 1M aligned + * However between Kernel Memory and the Kernel mtd section, + * depending on the rootfs size, there can be overlapping + * memory areas. + */ - /* We need to make sure all sections are properly 1M aligned - * However between Kernel Memory and the Kernel mtd section, depending on the - * rootfs size, there can be overlapping memory areas. - */ - - if (as_1m && i!=L1I_MEM && i!=L1D_MEM) { + if (as_1m && i != L1I_MEM && i != L1D_MEM) { #ifdef CONFIG_MTD_UCLINUX - if (i == SDRAM_RAM_MTD) { - if ((cplb_data[SDRAM_KERN].end + 1) > cplb_data[SDRAM_RAM_MTD].start) - cplb_data[SDRAM_RAM_MTD].start = (cplb_data[i].start & (-2*SIZE_1M)) + SIZE_1M; - else - cplb_data[SDRAM_RAM_MTD].start = (cplb_data[i].start & (-2*SIZE_1M)); - } else + if (i == SDRAM_RAM_MTD) { + if ((cplb_data[SDRAM_KERN].end + 1) > + cplb_data[SDRAM_RAM_MTD].start) + cplb_data[SDRAM_RAM_MTD].start = + (cplb_data[i].start & + (-2*SIZE_1M)) + SIZE_1M; + else + cplb_data[SDRAM_RAM_MTD].start = + (cplb_data[i].start & + (-2*SIZE_1M)); + } else #endif - printk(KERN_WARNING "Unaligned Start of %s at 0x%X\n", - cplb_data[i].name, cplb_data[i].start); - } + printk(KERN_WARNING + "Unaligned Start of %s at 0x%X\n", + cplb_data[i].name, cplb_data[i].start); + } - as = cplb_data[i].start % SIZE_4M; - ae = cplb_data[i].end % SIZE_4M; - - if (as) - a_start = cplb_data[i].start + (SIZE_4M - (as)); - else - a_start = cplb_data[i].start; - - a_end = cplb_data[i].end - ae; - - for (j = INITIAL_T; j <= SWITCH_T; j++) { - - switch (j) { - case INITIAL_T: - if (cplb_data[i].attr & INITIAL_T) { - t_i = &cplb.init_i; - t_d = &cplb.init_d; - process = 1; - } else - process = 0; - break; - case SWITCH_T: - if (cplb_data[i].attr & SWITCH_T) { - t_i = &cplb.switch_i; - t_d = &cplb.switch_d; - process = 1; - } else - process = 0; - break; - default: - process = 0; - break; - } + as = cplb_data[i].start % SIZE_4M; + ae = cplb_data[i].end % SIZE_4M; - if (process) { - if (cplb_data[i].attr & I_CPLB) { - - if (cplb_data[i].psize) { - fill_cplbtab(t_i, - cplb_data[i].start, - cplb_data[i].end, - cplb_data[i].psize, - cplb_data[i].i_conf); - } else { - /*icplb_table */ -#if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263)) - if (i == SDRAM_KERN) { - fill_cplbtab(t_i, - cplb_data[i].start, - cplb_data[i].end, - SIZE_4M, - cplb_data[i].i_conf); - } else -#endif - { - fill_cplbtab(t_i, - cplb_data[i].start, - a_start, - SIZE_1M, - cplb_data[i].i_conf); - fill_cplbtab(t_i, - a_start, - a_end, - SIZE_4M, - cplb_data[i].i_conf); - fill_cplbtab(t_i, a_end, - cplb_data[i].end, - SIZE_1M, - cplb_data[i].i_conf); - } - } + if (as) + a_start = cplb_data[i].start + (SIZE_4M - (as)); + else + a_start = cplb_data[i].start; - } - if (cplb_data[i].attr & D_CPLB) { - - if (cplb_data[i].psize) { - fill_cplbtab(t_d, - cplb_data[i].start, - cplb_data[i].end, - cplb_data[i].psize, - cplb_data[i].d_conf); - } else { -/*dcplb_table*/ - fill_cplbtab(t_d, - cplb_data[i].start, - a_start, SIZE_1M, - cplb_data[i].d_conf); - fill_cplbtab(t_d, a_start, - a_end, SIZE_4M, - cplb_data[i].d_conf); - fill_cplbtab(t_d, a_end, - cplb_data[i].end, - SIZE_1M, - cplb_data[i].d_conf); + a_end = cplb_data[i].end - ae; - } + for (j = INITIAL_T; j <= SWITCH_T; j++) { - } - } + switch (j) { + case INITIAL_T: + if (cplb_data[i].attr & INITIAL_T) { + t_i = &cplb.init_i; + t_d = &cplb.init_d; + process = 1; + } else + process = 0; + break; + case SWITCH_T: + if (cplb_data[i].attr & SWITCH_T) { + t_i = &cplb.switch_i; + t_d = &cplb.switch_d; + process = 1; + } else + process = 0; + break; + default: + process = 0; + break; } + if (!process) + continue; + if (cplb_data[i].attr & I_CPLB) + __fill_code_cplbtab(t_i, i, a_start, a_end); + + if (cplb_data[i].attr & D_CPLB) + __fill_data_cplbtab(t_d, i, a_start, a_end); } } -- cgit v0.10.2 From 00163e869e44f5489c33cd3ec0e502c33a0d4ba7 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 11 Jun 2007 16:22:18 +0800 Subject: Blackfin arch: fix spelling typo in output Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu diff --git a/arch/blackfin/mach-common/cplbinfo.c b/arch/blackfin/mach-common/cplbinfo.c index d65fac3..caa9623 100644 --- a/arch/blackfin/mach-common/cplbinfo.c +++ b/arch/blackfin/mach-common/cplbinfo.c @@ -82,7 +82,7 @@ static char *cplb_print_entry(char *buf, int type) int entry = 0, used_cplb = 0; if (type == CPLB_I) { - buf += sprintf(buf, "Instrction CPLB entry:\n"); + buf += sprintf(buf, "Instruction CPLB entry:\n"); p_addr = ipdt_table; p_data = ipdt_table + 1; p_icount = ipdt_swapcount_table; -- cgit v0.10.2 From e7613aab91270a6c76c61d3a1c05eaaa882b1842 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 11 Jun 2007 16:37:57 +0800 Subject: Blackfin arch: As Mike pointed out range goes form m..MAX_BLACKFIN_GPIO -1 Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index 3f49fae..8cefed8 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -138,7 +138,7 @@ static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG0_INT inline int check_gpio(unsigned short gpio) { - if (gpio > MAX_BLACKFIN_GPIOS) + if (gpio >= MAX_BLACKFIN_GPIOS) return -EINVAL; return 0; } -- cgit v0.10.2 From fd92348e520af92ddd48b8100cd0ccb16a055ed3 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 11 Jun 2007 16:39:40 +0800 Subject: Blackfin arch: add missing gpio.h header to fix compiling in some pm configurations Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c index afed524..150ef5d 100644 --- a/arch/blackfin/mach-common/pm.c +++ b/arch/blackfin/mach-common/pm.c @@ -39,7 +39,7 @@ #include #include #include - +#include #ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_H #define WAKEUP_TYPE PM_WAKE_HIGH -- cgit v0.10.2 From 5e10b4a653b9c7942fd1044fe5b592d544736897 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 11 Jun 2007 16:44:09 +0800 Subject: Blackfin arch: add support for Alon Bar-Lev's dynamic kernel command-line Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 0ba5f4a..a24fa1a 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -61,7 +61,7 @@ EXPORT_SYMBOL(memory_mtd_start); EXPORT_SYMBOL(mtd_size); #endif -char command_line[COMMAND_LINE_SIZE]; +char __initdata command_line[COMMAND_LINE_SIZE]; #if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE) static void generate_cpl_tables(void); @@ -205,7 +205,6 @@ void __init setup_arch(char **cmdline_p) #endif #if defined(CONFIG_CMDLINE_BOOL) - memset(command_line, 0, sizeof(command_line)); strncpy(&command_line[0], CONFIG_CMDLINE, sizeof(command_line)); command_line[sizeof(command_line) - 1] = 0; #endif @@ -213,7 +212,7 @@ void __init setup_arch(char **cmdline_p) /* Keep a copy of command line */ *cmdline_p = &command_line[0]; memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); - boot_command_line[COMMAND_LINE_SIZE - 1] = 0; + boot_command_line[COMMAND_LINE_SIZE - 1] = '\0'; /* setup memory defaults from the user config */ physical_mem_end = 0; @@ -898,7 +897,7 @@ struct seq_operations cpuinfo_op = { .show = show_cpuinfo, }; -void __init cmdline_init(char *r0) +void __init cmdline_init(const char *r0) { if (r0) strncpy(command_line, r0, COMMAND_LINE_SIZE); -- cgit v0.10.2 From 581d62ab304fb43d2ae4de06527676661b171cf6 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Thu, 14 Jun 2007 13:30:23 +0800 Subject: Blackfin arch: fix bug can not wakeup from sleep via push buttons Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index 8cefed8..bb1f4fb 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -494,19 +494,24 @@ u32 gpio_pm_setup(void) gpio_bank_saved[bank].dir = gpio_bankb[bank]->dir; gpio_bank_saved[bank].edge = gpio_bankb[bank]->edge; gpio_bank_saved[bank].both = gpio_bankb[bank]->both; + gpio_bank_saved[bank].reserved = reserved_map[bank]; gpio = i; while (mask) { if (mask & 1) { - bfin_gpio_wakeup_type(gpio, wakeup_flags_map[gpio]); + reserved_map[gpio_bank(gpio)] |= + gpio_bit(gpio); + bfin_gpio_wakeup_type(gpio, + wakeup_flags_map[gpio]); set_gpio_data(gpio, 0); /*Clear*/ } gpio++; mask >>= 1; } - sic_iwr |= 1 << (sic_iwr_irqs[bank] - (IRQ_CORETMR + 1)); + sic_iwr |= 1 << + (sic_iwr_irqs[bank] - (IRQ_CORETMR + 1)); gpio_bankb[bank]->maskb_set = wakeup_map[gpio_bank(i)]; } } @@ -535,6 +540,9 @@ void gpio_pm_restore(void) gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar; gpio_bankb[bank]->edge = gpio_bank_saved[bank].edge; gpio_bankb[bank]->both = gpio_bank_saved[bank].both; + + reserved_map[bank] = gpio_bank_saved[bank].reserved; + } gpio_bankb[bank]->maskb = gpio_bank_saved[bank].maskb; diff --git a/include/asm-blackfin/gpio.h b/include/asm-blackfin/gpio.h index aa0d550..d98d77a 100644 --- a/include/asm-blackfin/gpio.h +++ b/include/asm-blackfin/gpio.h @@ -332,6 +332,7 @@ struct gpio_port_s { unsigned short inen; unsigned short fer; + unsigned short reserved; }; #endif /*CONFIG_PM*/ -- cgit v0.10.2 From 43a3188ea348c41a197a754164ff96cc48124d85 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 14 Jun 2007 13:33:37 +0800 Subject: Blackfin arch: make sure we initialize our L1 Data B section properly based on the linked kernel Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c index dbb37b8..6810792 100644 --- a/arch/blackfin/mm/blackfin_sram.c +++ b/arch/blackfin/mm/blackfin_sram.c @@ -109,8 +109,9 @@ void __init l1_data_sram_init(void) #endif #if L1_DATA_B_LENGTH != 0 memset(&l1_data_B_sram, 0x00, sizeof(l1_data_B_sram)); - l1_data_B_sram[0].paddr = (void*)L1_DATA_B_START; - l1_data_B_sram[0].size = L1_DATA_B_LENGTH; + l1_data_B_sram[0].paddr = (void *)L1_DATA_B_START + + (_ebss_b_l1 - _sdata_b_l1); + l1_data_B_sram[0].size = L1_DATA_B_LENGTH - (_ebss_b_l1 - _sdata_b_l1); l1_data_B_sram[0].flag = SRAM_SLT_FREE; printk(KERN_INFO "Blackfin Data B SRAM: %d KB (%d KB free)\n", -- cgit v0.10.2 From de6a9520d4c799ce2079c59457b06251367e67b6 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 11 Jun 2007 17:27:05 +0800 Subject: Blackfin arch: redo our linker script a bit - we can start taking advantages of defines in asm-generic/vmlinux.lds.h - move our L1 relocated sections into init so it gets freed after relocation Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index 19b853af..1ef1e36 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -7,7 +7,7 @@ * Description: Master linker script for blackfin architecture * * Modified: - * Copyright 2004-2006 Analog Devices Inc. + * Copyright 2004-2007 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -32,98 +32,54 @@ #include #include - OUTPUT_FORMAT("elf32-bfin") ENTRY(__start) _jiffies = _jiffies_64; -MEMORY -{ - ram : ORIGIN = CONFIG_BOOT_LOAD, LENGTH = (CONFIG_MEM_SIZE * 1024 * 1024) - (CONFIG_BOOT_LOAD) - l1_data_a : ORIGIN = L1_DATA_A_START, LENGTH = L1_DATA_A_LENGTH - l1_data_b : ORIGIN = L1_DATA_B_START, LENGTH = L1_DATA_B_LENGTH - l1_code : ORIGIN = L1_CODE_START, LENGTH = L1_CODE_LENGTH - l1_scratch : ORIGIN = L1_SCRATCH_START, LENGTH = L1_SCRATCH_LENGTH -} - SECTIONS { . = CONFIG_BOOT_LOAD; - .text : { - __text = .; - _text = .; - __stext = .; + __text = .; + _text = .; + __stext = .; TEXT_TEXT SCHED_TEXT + LOCK_TEXT *(.text.lock) + *(.fixup) + . = ALIGN(16); - ___start___ex_table = .; + ___start___ex_table = .; *(__ex_table) - ___stop___ex_table = .; - - *($code) - *(.rodata) - *(.rodata.*) - *(__vermagic) /* Kernel version magic */ - *(.rodata1) - *(.fixup) - *(.spinlock.text) + ___stop___ex_table = .; - /* Kernel symbol table: Normal symbols */ . = ALIGN(4); - ___start___ksymtab = .; - *(__ksymtab) - ___stop___ksymtab = .; - - /* Kernel symbol table: GPL-only symbols */ - ___start___ksymtab_gpl = .; - *(__ksymtab_gpl) - ___stop___ksymtab_gpl = .; - - /* Kernel symbol table: Normal unused symbols */ \ - ___start___ksymtab_unused = .; - *(__ksymtab_unused) - ___stop___ksymtab_unused = .; - - /* Kernel symbol table: GPL-only unused symbols */ - ___start___ksymtab_unused_gpl = .; - *(__ksymtab_unused_gpl) - ___stop___ksymtab_unused_gpl = .; - - - /* Kernel symbol table: GPL-future symbols */ - ___start___ksymtab_gpl_future = .; - *(__ksymtab_gpl_future) - ___stop___ksymtab_gpl_future = .; - - /* Kernel symbol table: Normal symbols */ - ___start___kcrctab = .; - *(__kcrctab) - ___stop___kcrctab = .; - - /* Kernel symbol table: GPL-only symbols */ - ___start___kcrctab_gpl = .; - *(__kcrctab_gpl) - ___stop___kcrctab_gpl = .; - - /* Kernel symbol table: GPL-future symbols */ - ___start___kcrctab_gpl_future = .; - *(__kcrctab_gpl_future) - ___stop___kcrctab_gpl_future = .; - - /* Kernel symbol table: strings */ - *(__ksymtab_strings) - - . = ALIGN(4); __etext = .; - } > ram + } + + RODATA + + .data : + { + __sdata = .; + . = ALIGN(0x2000); + *(.data.init_task) + DATA_DATA + CONSTRUCTORS + + . = ALIGN(32); + *(.data.cacheline_aligned) + + . = ALIGN(0x2000); + __edata = .; + } + ___init_begin = .; .init : { . = ALIGN(4096); - ___init_begin = .; __sinittext = .; *(.init.text) __einittext = .; @@ -149,39 +105,39 @@ SECTIONS *(.init.ramfs) ___initramfs_end = .; . = ALIGN(4); - ___init_end = .; - } > ram + } - __l1_lma_start = .; + __l1_lma_start = .; - .text_l1 : + .text_l1 L1_CODE_START : AT(LOADADDR(.init) + SIZEOF(.init)) { . = ALIGN(4); - __stext_l1 = .; + __stext_l1 = .; *(.l1.text) . = ALIGN(4); - __etext_l1 = .; - } > l1_code AT > ram + __etext_l1 = .; + } - .data_l1 : + .data_l1 L1_DATA_A_START : AT(LOADADDR(.text_l1) + SIZEOF(.text_l1)) { . = ALIGN(4); - __sdata_l1 = .; + __sdata_l1 = .; *(.l1.data) - __edata_l1 = .; + __edata_l1 = .; . = ALIGN(4); - __sbss_l1 = .; + __sbss_l1 = .; *(.l1.bss) . = ALIGN(32); *(.data_l1.cacheline_aligned) . = ALIGN(4); - __ebss_l1 = .; - } > l1_data_a AT > ram - .data_b_l1 : + __ebss_l1 = .; + } + + .data_b_l1 L1_DATA_B_START : AT(LOADADDR(.data_l1) + SIZEOF(.data_l1)) { . = ALIGN(4); __sdata_b_l1 = .; @@ -194,36 +150,25 @@ SECTIONS . = ALIGN(4); __ebss_b_l1 = .; - } > l1_data_b AT > ram + } - .data : - { - __sdata = .; - . = ALIGN(0x2000); - *(.data.init_task) - DATA_DATA + ___init_end = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1); - . = ALIGN(32); - *(.data.cacheline_aligned) - - . = ALIGN(0x2000); - __edata = .; - } > ram - - /DISCARD/ : { /* Exit code and data*/ - *(.exit.text) - *(.exit.data) - *(.exitcall.exit) - } > ram - - .bss : + .bss LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1) : { . = ALIGN(4); - ___bss_start = .; + ___bss_start = .; *(.bss) *(COMMON) . = ALIGN(4); - ___bss_stop = .; - __end = . ; - } > ram + ___bss_stop = .; + __end = .; + } + + /DISCARD/ : + { + *(.exit.text) + *(.exit.data) + *(.exitcall.exit) + } } -- cgit v0.10.2 From df30b1171714bbf0e55ffe02138be4b8447e4235 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 11 Jun 2007 17:47:27 +0800 Subject: Blackfin arch: move HI/LO macros into blackfin.h and punt the rest of macros.h as it includes VDSP macros we never use Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu diff --git a/include/asm-blackfin/blackfin.h b/include/asm-blackfin/blackfin.h index 14e58de..db3b615 100644 --- a/include/asm-blackfin/blackfin.h +++ b/include/asm-blackfin/blackfin.h @@ -6,7 +6,11 @@ #ifndef _BLACKFIN_H_ #define _BLACKFIN_H_ -#include +#define LO(con32) ((con32) & 0xFFFF) +#define lo(con32) ((con32) & 0xFFFF) +#define HI(con32) (((con32) >> 16) & 0xFFFF) +#define hi(con32) (((con32) >> 16) & 0xFFFF) + #include #include diff --git a/include/asm-blackfin/macros.h b/include/asm-blackfin/macros.h index c0c04a2..e69de29 100644 --- a/include/asm-blackfin/macros.h +++ b/include/asm-blackfin/macros.h @@ -1,95 +0,0 @@ -/************************************************************************ - * - * macros.h - * - * (c) Copyright 2001-2003 Analog Devices, Inc. All rights reserved. - * - ************************************************************************/ - -/* Defines various assembly macros. */ - -#ifndef _MACROS_H -#define _MACROS_H - -#define LO(con32) ((con32) & 0xFFFF) -#define lo(con32) ((con32) & 0xFFFF) -#define HI(con32) (((con32) >> 16) & 0xFFFF) -#define hi(con32) (((con32) >> 16) & 0xFFFF) - -/* - * Set the corresponding bits in a System Register (SR); - * All bits set in "mask" will be set in the system register - * specified by "sys_reg" bitset_SR(sys_reg, mask), where - * sys_reg is the system register and mask are the bits to be set. - */ -#define bitset_SR(sys_reg, mask)\ - [--SP] = (R7:6);\ - r7 = sys_reg;\ - r6.l = (mask) & 0xffff;\ - r6.h = (mask) >> 16;\ - r7 = r7 | r6;\ - sys_reg = r7;\ - csync;\ - (R7:6) = [SP++] - -/* - * Clear the corresponding bits in a System Register (SR); - * All bits set in "mask" will be cleared in the SR - * specified by "sys_reg" bitclr_SR(sys_reg, mask), where - * sys_reg is the SR and mask are the bits to be cleared. - */ -#define bitclr_SR(sys_reg, mask)\ - [--SP] = (R7:6);\ - r7 = sys_reg;\ - r7 =~ r7;\ - r6.l = (mask) & 0xffff;\ - r6.h = (mask) >> 16;\ - r7 = r7 | r6;\ - r7 =~ r7;\ - sys_reg = r7;\ - csync;\ - (R7:6) = [SP++] - -/* - * Set the corresponding bits in a Memory Mapped Register (MMR); - * All bits set in "mask" will be set in the MMR specified by "mmr_reg" - * bitset_MMR(mmr_reg, mask), where mmr_reg is the MMR and mask are - * the bits to be set. - */ -#define bitset_MMR(mmr_reg, mask)\ - [--SP] = (R7:6);\ - [--SP] = P5;\ - p5.l = mmr_reg & 0xffff;\ - p5.h = mmr_reg >> 16;\ - r7 = [p5];\ - r6.l = (mask) & 0xffff;\ - r6.h = (mask) >> 16;\ - r7 = r7 | r6;\ - [p5] = r7;\ - csync;\ - p5 = [SP++];\ - (R7:6) = [SP++] - -/* - * Clear the corresponding bits in a Memory Mapped Register (MMR); - * All bits set in "mask" will be cleared in the MMR specified by "mmr_reg" - * bitclr_MMRreg(mmr_reg, mask), where sys_reg is the MMR and mask are - * the bits to be cleared. - */ -#define bitclr_MMR(mmr_reg, mask)\ - [--SP] = (R7:6);\ - [--SP] = P5;\ - p5.l = mmr_reg & 0xffff;\ - p5.h = mmr_reg >> 16;\ - r7 = [p5];\ - r7 =~ r7;\ - r6.l = (mask) & 0xffff;\ - r6.h = (mask) >> 16;\ - r7 = r7 | r6;\ - r7 =~ r7;\ - [p5] = r7;\ - csync;\ - p5 = [SP++];\ - (R7:6) = [SP++] - -#endif /* _MACROS_H */ -- cgit v0.10.2 From c16c3ca79abcb69a9e45f7c15f8358b3915c0e49 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 11 Jun 2007 15:31:30 +0800 Subject: Blackfin serial driver: hook up our UARTs STP bit with userspaces CMSPAR so we can now do spaced/marked parity Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 787dc71..aeb3cc2 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -629,6 +629,8 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, lcr |= PEN; if (!(termios->c_cflag & PARODD)) lcr |= EPS; + if (termios->c_cflag & CMSPAR) + lcr |= STP; } port->read_status_mask = OE; -- cgit v0.10.2 From 9808901b6c63a1c850b072e624c228901a9eaf10 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 11 Jun 2007 15:31:30 +0800 Subject: Blackfin serial driver: ignore framing and parity errors if we get a break signal, we want to ignore framing and parity errors because those will always be set (by nature of the signal) Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index aeb3cc2..9d356fc 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -185,6 +185,7 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) uart->port.icount.brk++; if (uart_handle_break(&uart->port)) goto ignore_char; + status &= ~(PE | FE); } if (status & PE) uart->port.icount.parity++; @@ -341,6 +342,7 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) uart->port.icount.brk++; if (uart_handle_break(&uart->port)) goto dma_ignore_char; + status &= ~(PE | FE); } if (status & PE) uart->port.icount.parity++; -- cgit v0.10.2 From cf68676222e54cd0a31efd968da00e65f9a0963f Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 11 Jun 2007 16:12:49 +0800 Subject: Blackfin serial driver: actually implement the break_ctl() function Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 9d356fc..a9d2027 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -519,6 +519,14 @@ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart) */ static void bfin_serial_break_ctl(struct uart_port *port, int break_state) { + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + u16 lcr = UART_GET_LCR(uart); + if (break_state) + lcr |= SB; + else + lcr &= ~SB; + UART_PUT_LCR(uart, lcr); + SSYNC(); } static int bfin_serial_startup(struct uart_port *port) -- cgit v0.10.2 From 19aa6382e3c927b8ec5caec7b74c3dc555101146 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 11 Jun 2007 16:16:45 +0800 Subject: Blackfin serial driver: decouple PARODD and CMSPAR checking from PARENB as the termios info does not stipulate that the former are dependent on the latter Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index a9d2027..22569bd 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -635,13 +635,12 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, if (termios->c_cflag & CSTOPB) lcr |= STB; - if (termios->c_cflag & PARENB) { + if (termios->c_cflag & PARENB) lcr |= PEN; - if (!(termios->c_cflag & PARODD)) - lcr |= EPS; - if (termios->c_cflag & CMSPAR) - lcr |= STP; - } + if (!(termios->c_cflag & PARODD)) + lcr |= EPS; + if (termios->c_cflag & CMSPAR) + lcr |= STP; port->read_status_mask = OE; if (termios->c_iflag & INPCK) -- cgit v0.10.2 From 566da5b2666e62a7b061b42964658697183bef1c Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 11 Jun 2007 15:31:30 +0800 Subject: Blackfin RTC drivers: update MAINTAINERS information Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Cc: Alessandro Zummo diff --git a/MAINTAINERS b/MAINTAINERS index 8b26d9e..bef7977 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -755,6 +755,14 @@ L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) W: http://blackfin.uclinux.org S: Supported +BLACKFIN RTC DRIVER +P: Mike Frysinger +M: michael.frysinger@analog.com +M: vapier.adi@gmail.com +L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) +W: http://blackfin.uclinux.org +S: Supported + BLACKFIN SERIAL DRIVER P: Aubrey Li M: aubrey.li@analog.com -- cgit v0.10.2 From 27bb9e79bcfedc1888d23c3c212c189fa8534fe7 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 11 Jun 2007 15:31:30 +0800 Subject: Blackfin SPI driver: tweak spi cleanup function to match newer kernel changes Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Cc: David Brownell diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 7d2d9ec..a2d4884 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -1082,7 +1082,7 @@ static int setup(struct spi_device *spi) */ static void cleanup(struct spi_device *spi) { - struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi); + struct chip_data *chip = spi_get_ctldata(spi); kfree(chip); } -- cgit v0.10.2 From d6fe89b0630080e2bd6ece20ff7b1b5c2647ed62 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Mon, 11 Jun 2007 17:34:17 +0800 Subject: Blackfin SPI driver: fix bug SPI DMA incomplete transmission SPI writes intermittently drop bytes at end of DMA transfer http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3205 http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=2892 Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index a2d4884..48587c2 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -582,14 +582,19 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id) dev_dbg(&drv_data->pdev->dev, "in dma_irq_handler\n"); clear_dma_irqstat(CH_SPI); + /* Wait for DMA to complete */ + while (get_dma_curr_irqstat(CH_SPI) & DMA_RUN) + continue; + /* - * wait for the last transaction shifted out. yes, these two - * while loops are supposed to be the same (see the HRM). + * wait for the last transaction shifted out. HRM states: + * at this point there may still be data in the SPI DMA FIFO waiting + * to be transmitted ... software needs to poll TXS in the SPI_STAT + * register until it goes low for 2 successive reads */ if (drv_data->tx != NULL) { - while (bfin_read_SPI_STAT() & TXS) - continue; - while (bfin_read_SPI_STAT() & TXS) + while ((bfin_read_SPI_STAT() & TXS) || + (bfin_read_SPI_STAT() & TXS)) continue; } -- cgit v0.10.2 From c5760abde715dcd9ead66769e45d1896332e9d9c Mon Sep 17 00:00:00 2001 From: Jean-Christian de Rivaz Date: Mon, 11 Jun 2007 17:44:14 +0800 Subject: Blackfin SMC91X ethernet supporting driver: SMC91C111 LEDs are note drived in the kernel like in uboot Signed-off-by: Jean-Christian de Rivaz Signed-off-by: Bryan Wu diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 506bffc..f842944 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -58,6 +58,8 @@ #elif defined(CONFIG_BFIN) #define SMC_IRQ_FLAGS IRQF_TRIGGER_HIGH +#define RPC_LSA_DEFAULT RPC_LED_100_10 +#define RPC_LSB_DEFAULT RPC_LED_TX_RX # if defined (CONFIG_BFIN561_EZKIT) #define SMC_CAN_USE_8BIT 0 -- cgit v0.10.2