From 03fc3070457dc0e6a717a2e732af93ef1cb2ae51 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Sun, 4 Dec 2011 12:26:50 +0100 Subject: batman-adv: in case of roaming mark the client with TT_CLIENT_ROAM In case of a client roaming from node A to node B, the latter have to mark the corresponding global entry with TT_CLIENT_ROAM (instead of TT_CLIENT_PENDING). Marking a global entry with TT_CLIENT_PENDING will end up in keeping such entry forever (because this flag is only meant to be used with local entries and it is never checked on global ones). In the worst case (all the clients roaming to the same node A) the local and the global table will contain exactly the same clients. Batman-adv will continue to work, but the memory usage is duplicated. Signed-off-by: Antonio Quartulli diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index c7aafc7..c46b140 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -245,9 +245,11 @@ void tt_local_add(struct net_device *soft_iface, const uint8_t *addr, if (tt_global_entry) { /* This node is probably going to update its tt table */ tt_global_entry->orig_node->tt_poss_change = true; - /* The global entry has to be marked as PENDING and has to be + /* The global entry has to be marked as ROAMING and has to be * kept for consistency purpose */ - tt_global_entry->flags |= TT_CLIENT_PENDING; + tt_global_entry->flags |= TT_CLIENT_ROAM; + tt_global_entry->roam_at = jiffies; + send_roam_adv(bat_priv, tt_global_entry->addr, tt_global_entry->orig_node); } -- cgit v0.10.2 From 797399b415b78dacdbcaffdb89e46e369ec88b98 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Sun, 4 Dec 2011 22:38:27 +0100 Subject: batman-adv: delete global entry in case of roaming When receiving a DEL change for a client due to a roaming event (change is marked with TT_CLIENT_ROAM), each node has to check if the client roamed to itself or somewhere else. In the latter case the global entry is kept to avoid having no route at all otherwise we can safely delete the global entry Signed-off-by: Antonio Quartulli diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index c46b140..5f09a57 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -696,6 +696,7 @@ void tt_global_del(struct bat_priv *bat_priv, const char *message, bool roaming) { struct tt_global_entry *tt_global_entry = NULL; + struct tt_local_entry *tt_local_entry = NULL; tt_global_entry = tt_global_hash_find(bat_priv, addr); if (!tt_global_entry) @@ -703,15 +704,29 @@ void tt_global_del(struct bat_priv *bat_priv, if (tt_global_entry->orig_node == orig_node) { if (roaming) { - tt_global_entry->flags |= TT_CLIENT_ROAM; - tt_global_entry->roam_at = jiffies; - goto out; + /* if we are deleting a global entry due to a roam + * event, there are two possibilities: + * 1) the client roamed from node A to node B => we mark + * it with TT_CLIENT_ROAM, we start a timer and we + * wait for node B to claim it. In case of timeout + * the entry is purged. + * 2) the client roamed to us => we can directly delete + * the global entry, since it is useless now. */ + tt_local_entry = tt_local_hash_find(bat_priv, + tt_global_entry->addr); + if (!tt_local_entry) { + tt_global_entry->flags |= TT_CLIENT_ROAM; + tt_global_entry->roam_at = jiffies; + goto out; + } } _tt_global_del(bat_priv, tt_global_entry, message); } out: if (tt_global_entry) tt_global_entry_free_ref(tt_global_entry); + if (tt_local_entry) + tt_local_entry_free_ref(tt_local_entry); } void tt_global_del_orig(struct bat_priv *bat_priv, -- cgit v0.10.2 From 162d12de656bc76786ba5fad6dac7bd238de9657 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 4 Dec 2011 08:38:54 +0100 Subject: ath9k: fix check for antenna diversity support fixes a regression on single-stream chips introduced in commit 43c3528430bd29f5e52438cad7cf7c0c62bf4583 "ath9k: implement .get_antenna and .set_antenna" Signed-off-by: Felix Fietkau Reported-by: Marek Lindner Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 93fbe6f..d2348a5 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -286,7 +286,7 @@ static bool ath_complete_reset(struct ath_softc *sc, bool start) ath_start_ani(common); } - if (ath9k_hw_ops(ah)->antdiv_comb_conf_get && sc->ant_rx != 3) { + if ((ah->caps.hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB) && sc->ant_rx != 3) { struct ath_hw_antcomb_conf div_ant_conf; u8 lna_conf; -- cgit v0.10.2 From 43af940c54d712ab5e6d6798a82498b25c2af299 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 5 Dec 2011 05:01:15 +0000 Subject: net/fec: fix the use of pdev->id The pdev->id is used in several places for different purpose. All these uses assume it's always the id of fec device which is >= 0. However this is only true for non-DT case. When DT plays, pdev->id is always -1, which will break these pdev->id users. Instead of fixing all these users one by one, this patch introduces a new member 'dev_id' to 'struct fec_enet_private' for holding the correct fec device id, and replaces all the existing uses of pdev->id with this dev_id. Signed-off-by: Shawn Guo Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c index 1124ce0..c136230 100644 --- a/drivers/net/ethernet/freescale/fec.c +++ b/drivers/net/ethernet/freescale/fec.c @@ -232,6 +232,7 @@ struct fec_enet_private { struct platform_device *pdev; int opened; + int dev_id; /* Phylib and MDIO interface */ struct mii_bus *mii_bus; @@ -837,7 +838,7 @@ static void __inline__ fec_get_mac(struct net_device *ndev) /* Adjust MAC if using macaddr */ if (iap == macaddr) - ndev->dev_addr[ETH_ALEN-1] = macaddr[ETH_ALEN-1] + fep->pdev->id; + ndev->dev_addr[ETH_ALEN-1] = macaddr[ETH_ALEN-1] + fep->dev_id; } /* ------------------------------------------------------------------------- */ @@ -953,7 +954,7 @@ static int fec_enet_mii_probe(struct net_device *ndev) char mdio_bus_id[MII_BUS_ID_SIZE]; char phy_name[MII_BUS_ID_SIZE + 3]; int phy_id; - int dev_id = fep->pdev->id; + int dev_id = fep->dev_id; fep->phy_dev = NULL; @@ -1031,7 +1032,7 @@ static int fec_enet_mii_init(struct platform_device *pdev) * mdio interface in board design, and need to be configured by * fec0 mii_bus. */ - if ((id_entry->driver_data & FEC_QUIRK_ENET_MAC) && pdev->id > 0) { + if ((id_entry->driver_data & FEC_QUIRK_ENET_MAC) && fep->dev_id > 0) { /* fec1 uses fec0 mii_bus */ fep->mii_bus = fec0_mii_bus; return 0; @@ -1063,7 +1064,7 @@ static int fec_enet_mii_init(struct platform_device *pdev) fep->mii_bus->read = fec_enet_mdio_read; fep->mii_bus->write = fec_enet_mdio_write; fep->mii_bus->reset = fec_enet_mdio_reset; - snprintf(fep->mii_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id + 1); + snprintf(fep->mii_bus->id, MII_BUS_ID_SIZE, "%x", fep->dev_id + 1); fep->mii_bus->priv = fep; fep->mii_bus->parent = &pdev->dev; @@ -1521,6 +1522,7 @@ fec_probe(struct platform_device *pdev) int i, irq, ret = 0; struct resource *r; const struct of_device_id *of_id; + static int dev_id; of_id = of_match_device(fec_dt_ids, &pdev->dev); if (of_id) @@ -1548,6 +1550,7 @@ fec_probe(struct platform_device *pdev) fep->hwp = ioremap(r->start, resource_size(r)); fep->pdev = pdev; + fep->dev_id = dev_id++; if (!fep->hwp) { ret = -ENOMEM; -- cgit v0.10.2 From a454daceb78844a09c08b6e2d8badcb76a5d73b9 Mon Sep 17 00:00:00 2001 From: Djalal Harouni Date: Tue, 6 Dec 2011 15:47:12 +0000 Subject: ppp: fix pptp double release_sock in pptp_bind() Signed-off-by: Djalal Harouni Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/drivers/net/ppp/pptp.c b/drivers/net/ppp/pptp.c index 89f829f..f8a6853 100644 --- a/drivers/net/ppp/pptp.c +++ b/drivers/net/ppp/pptp.c @@ -423,10 +423,8 @@ static int pptp_bind(struct socket *sock, struct sockaddr *uservaddr, lock_sock(sk); opt->src_addr = sp->sa_addr.pptp; - if (add_chan(po)) { - release_sock(sk); + if (add_chan(po)) error = -EBUSY; - } release_sock(sk); return error; -- cgit v0.10.2 From 28d8ea2d568534026ccda3e8936f5ea1e04a86a1 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Fri, 11 Nov 2011 05:10:39 +0000 Subject: fsl_pq_mdio: Clean up tbi address configuration The code for setting the address of the internal TBI PHY was convoluted enough without a maze of ifdefs. Clean it up a bit so we allow the logic to fail down to -ENODEV at the end of the if/else ladder, rather than using ifdefs to repeat the same failure code over and over. Also, remove the support for the auto-configuration. I'm not aware of anyone using it, and it ends up using the bus mutex before it's been initialized. Signed-off-by: Andy Fleming Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/fsl_pq_mdio.c b/drivers/net/ethernet/freescale/fsl_pq_mdio.c index 52f4e8a..4d9f84b 100644 --- a/drivers/net/ethernet/freescale/fsl_pq_mdio.c +++ b/drivers/net/ethernet/freescale/fsl_pq_mdio.c @@ -183,28 +183,10 @@ void fsl_pq_mdio_bus_name(char *name, struct device_node *np) } EXPORT_SYMBOL_GPL(fsl_pq_mdio_bus_name); -/* Scan the bus in reverse, looking for an empty spot */ -static int fsl_pq_mdio_find_free(struct mii_bus *new_bus) -{ - int i; - - for (i = PHY_MAX_ADDR; i > 0; i--) { - u32 phy_id; - - if (get_phy_id(new_bus, i, &phy_id)) - return -1; - - if (phy_id == 0xffffffff) - break; - } - - return i; -} - -#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE) static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs, struct device_node *np) { +#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE) struct gfar __iomem *enet_regs; /* @@ -220,15 +202,15 @@ static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs, struct devi } else if (of_device_is_compatible(np, "fsl,etsec2-mdio") || of_device_is_compatible(np, "fsl,etsec2-tbi")) { return of_iomap(np, 1); - } else - return NULL; -} + } #endif + return NULL; +} -#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE) static int get_ucc_id_for_range(u64 start, u64 end, u32 *ucc_id) { +#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE) struct device_node *np = NULL; int err = 0; @@ -261,9 +243,10 @@ static int get_ucc_id_for_range(u64 start, u64 end, u32 *ucc_id) return err; else return -EINVAL; -} +#else + return -ENODEV; #endif - +} static int fsl_pq_mdio_probe(struct platform_device *ofdev) { @@ -339,19 +322,13 @@ static int fsl_pq_mdio_probe(struct platform_device *ofdev) of_device_is_compatible(np, "fsl,etsec2-mdio") || of_device_is_compatible(np, "fsl,etsec2-tbi") || of_device_is_compatible(np, "gianfar")) { -#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE) tbipa = get_gfar_tbipa(regs, np); if (!tbipa) { err = -EINVAL; goto err_free_irqs; } -#else - err = -ENODEV; - goto err_free_irqs; -#endif } else if (of_device_is_compatible(np, "fsl,ucc-mdio") || of_device_is_compatible(np, "ucc_geth_phy")) { -#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE) u32 id; static u32 mii_mng_master; @@ -364,10 +341,6 @@ static int fsl_pq_mdio_probe(struct platform_device *ofdev) mii_mng_master = id; ucc_set_qe_mux_mii_mng(id - 1); } -#else - err = -ENODEV; - goto err_free_irqs; -#endif } else { err = -ENODEV; goto err_free_irqs; @@ -386,16 +359,6 @@ static int fsl_pq_mdio_probe(struct platform_device *ofdev) } if (tbiaddr == -1) { - out_be32(tbipa, 0); - - tbiaddr = fsl_pq_mdio_find_free(new_bus); - } - - /* - * We define TBIPA at 0 to be illegal, opting to fail for boards that - * have PHYs at 1-31, rather than change tbipa and rescan. - */ - if (tbiaddr == 0) { err = -EBUSY; goto err_free_irqs; -- cgit v0.10.2 From 15062e6a8524f5977f2cbdf6e3eb2f144262f74e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 7 Dec 2011 09:02:21 +0100 Subject: mac80211: fix another race in aggregation start Emmanuel noticed that when mac80211 stops the queues for aggregation that can leave a packet pending. This packet will be given to the driver after the AMPDU callback, but as a non-aggregated packet which messes up the sequence number etc. I also noticed by looking at the code that if packets are being processed while we clear the WANT_START bit, they might see it cleared already and queue up on tid_tx->pending. If the driver then rejects the new aggregation session we leak the packet. Fix both of these issues by changing this code to not stop the queues at all. Instead, let packets queue up on the tid_tx->pending queue instead of letting them get to the driver, and add code to recover properly in case the driver rejects the session. (The patch looks large because it has to move two functions to before their new use.) Cc: stable@vger.kernel.org Reported-by: Emmanuel Grumbach Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index 331472c..d448f7a 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -302,6 +302,38 @@ ieee80211_wake_queue_agg(struct ieee80211_local *local, int tid) __release(agg_queue); } +/* + * splice packets from the STA's pending to the local pending, + * requires a call to ieee80211_agg_splice_finish later + */ +static void __acquires(agg_queue) +ieee80211_agg_splice_packets(struct ieee80211_local *local, + struct tid_ampdu_tx *tid_tx, u16 tid) +{ + int queue = ieee80211_ac_from_tid(tid); + unsigned long flags; + + ieee80211_stop_queue_agg(local, tid); + + if (WARN(!tid_tx, "TID %d gone but expected when splicing aggregates" + " from the pending queue\n", tid)) + return; + + if (!skb_queue_empty(&tid_tx->pending)) { + spin_lock_irqsave(&local->queue_stop_reason_lock, flags); + /* copy over remaining packets */ + skb_queue_splice_tail_init(&tid_tx->pending, + &local->pending[queue]); + spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); + } +} + +static void __releases(agg_queue) +ieee80211_agg_splice_finish(struct ieee80211_local *local, u16 tid) +{ + ieee80211_wake_queue_agg(local, tid); +} + void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid) { struct tid_ampdu_tx *tid_tx; @@ -313,19 +345,17 @@ void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid) tid_tx = rcu_dereference_protected_tid_tx(sta, tid); /* - * While we're asking the driver about the aggregation, - * stop the AC queue so that we don't have to worry - * about frames that came in while we were doing that, - * which would require us to put them to the AC pending - * afterwards which just makes the code more complex. + * Start queuing up packets for this aggregation session. + * We're going to release them once the driver is OK with + * that. */ - ieee80211_stop_queue_agg(local, tid); - clear_bit(HT_AGG_STATE_WANT_START, &tid_tx->state); /* - * make sure no packets are being processed to get - * valid starting sequence number + * Make sure no packets are being processed. This ensures that + * we have a valid starting sequence number and that in-flight + * packets have been flushed out and no packets for this TID + * will go into the driver during the ampdu_action call. */ synchronize_net(); @@ -339,17 +369,15 @@ void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid) " tid %d\n", tid); #endif spin_lock_bh(&sta->lock); + ieee80211_agg_splice_packets(local, tid_tx, tid); ieee80211_assign_tid_tx(sta, tid, NULL); + ieee80211_agg_splice_finish(local, tid); spin_unlock_bh(&sta->lock); - ieee80211_wake_queue_agg(local, tid); kfree_rcu(tid_tx, rcu_head); return; } - /* we can take packets again now */ - ieee80211_wake_queue_agg(local, tid); - /* activate the timer for the recipient's addBA response */ mod_timer(&tid_tx->addba_resp_timer, jiffies + ADDBA_RESP_INTERVAL); #ifdef CONFIG_MAC80211_HT_DEBUG @@ -465,38 +493,6 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid, } EXPORT_SYMBOL(ieee80211_start_tx_ba_session); -/* - * splice packets from the STA's pending to the local pending, - * requires a call to ieee80211_agg_splice_finish later - */ -static void __acquires(agg_queue) -ieee80211_agg_splice_packets(struct ieee80211_local *local, - struct tid_ampdu_tx *tid_tx, u16 tid) -{ - int queue = ieee80211_ac_from_tid(tid); - unsigned long flags; - - ieee80211_stop_queue_agg(local, tid); - - if (WARN(!tid_tx, "TID %d gone but expected when splicing aggregates" - " from the pending queue\n", tid)) - return; - - if (!skb_queue_empty(&tid_tx->pending)) { - spin_lock_irqsave(&local->queue_stop_reason_lock, flags); - /* copy over remaining packets */ - skb_queue_splice_tail_init(&tid_tx->pending, - &local->pending[queue]); - spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); - } -} - -static void __releases(agg_queue) -ieee80211_agg_splice_finish(struct ieee80211_local *local, u16 tid) -{ - ieee80211_wake_queue_agg(local, tid); -} - static void ieee80211_agg_tx_operational(struct ieee80211_local *local, struct sta_info *sta, u16 tid) { -- cgit v0.10.2 From 91ddff8a3b9cc7ac2252aca138220939cf6cc2cf Mon Sep 17 00:00:00 2001 From: Philipp Dreimann Date: Wed, 7 Dec 2011 13:43:31 -0600 Subject: rtl8192{ce,cu,de,se}: avoid problems because of possible ERFOFF -> ERFSLEEP transition In drivers rtl8192ce, rtl8192cu, rtl8192se, and rtl8192de, break statements would allow ppsc->rfpwr_state to be changed to ERFSLEEP even though the device is actually in ERFOFF. Signed-off-by: Philipp Dreimann Signed-off-by: Larry Finger Cc: Stable Cc: Chaoming Li Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c index 592a10a..3b585aa 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c @@ -569,7 +569,7 @@ static bool _rtl92ce_phy_set_rf_power_state(struct ieee80211_hw *hw, } case ERFSLEEP:{ if (ppsc->rfpwr_state == ERFOFF) - break; + return false; for (queue_id = 0, i = 0; queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) { ring = &pcipriv->dev.tx_ring[queue_id]; diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c b/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c index 7285290..e49cf22 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c @@ -548,7 +548,7 @@ static bool _rtl92cu_phy_set_rf_power_state(struct ieee80211_hw *hw, break; case ERFSLEEP: if (ppsc->rfpwr_state == ERFOFF) - break; + return false; for (queue_id = 0, i = 0; queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) { ring = &pcipriv->dev.tx_ring[queue_id]; diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/phy.c b/drivers/net/wireless/rtlwifi/rtl8192de/phy.c index 3ac7af1..0883349 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/phy.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/phy.c @@ -3374,7 +3374,7 @@ bool rtl92d_phy_set_rf_power_state(struct ieee80211_hw *hw, break; case ERFSLEEP: if (ppsc->rfpwr_state == ERFOFF) - break; + return false; for (queue_id = 0, i = 0; queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) { diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/phy.c b/drivers/net/wireless/rtlwifi/rtl8192se/phy.c index f27171a..f10ac1a 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192se/phy.c +++ b/drivers/net/wireless/rtlwifi/rtl8192se/phy.c @@ -602,7 +602,7 @@ bool rtl92s_phy_set_rf_power_state(struct ieee80211_hw *hw, } case ERFSLEEP: if (ppsc->rfpwr_state == ERFOFF) - break; + return false; for (queue_id = 0, i = 0; queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) { -- cgit v0.10.2 From 329456d1ffb416c220813725b7363cda9975c9aa Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Mon, 5 Dec 2011 23:19:51 +0100 Subject: ssb: fix init regression with SoCs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes a Data bus error on some SoCs. The first fix for this problem did not solve it on all devices. commit 6ae8ec27868bfdbb815287bee8146acbefaee867 Author: Rafał Miłecki Date: Tue Jul 5 17:25:32 2011 +0200 ssb: fix init regression of hostmode PCI core In ssb_pcicore_fix_sprom_core_index() the sprom on the PCI core is accessed, but the sprom only exists when the ssb bus is connected over a PCI bus to the rest of the system and not when the SSB Bus is the main system bus. SoCs sometimes have a PCI host controller and there this code will not be executed, but there are some old SoCs with an PCI controller in client mode around and ssb_pcicore_fix_sprom_core_index() should not be called on these devices too. The PCI controller on these devices are unused, but without this fix it results in an Data bus error when it gets initialized. Cc: Michael Buesch Cc: Rafał Miłecki Signed-off-by: Hauke Mehrtens Cc: stable@vger.kernel.org Signed-off-by: John W. Linville diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c index e6ac317..32c535f 100644 --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -516,10 +516,14 @@ static void ssb_pcicore_pcie_setup_workarounds(struct ssb_pcicore *pc) static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) { - ssb_pcicore_fix_sprom_core_index(pc); + struct ssb_device *pdev = pc->dev; + struct ssb_bus *bus = pdev->bus; + + if (bus->bustype == SSB_BUSTYPE_PCI) + ssb_pcicore_fix_sprom_core_index(pc); /* Disable PCI interrupts. */ - ssb_write32(pc->dev, SSB_INTVEC, 0); + ssb_write32(pdev, SSB_INTVEC, 0); /* Additional PCIe always once-executed workarounds */ if (pc->dev->id.coreid == SSB_DEV_PCIE) { -- cgit v0.10.2 From 4af04aba93f47699e7ac33e7cfd4da22550e6114 Mon Sep 17 00:00:00 2001 From: Li Wei Date: Tue, 6 Dec 2011 21:23:45 +0000 Subject: ipv6: Fix for adding multicast route for loopback device automatically. There is no obvious reason to add a default multicast route for loopback devices, otherwise there would be a route entry whose dst.error set to -ENETUNREACH that would blocking all multicast packets. ==================== [ more detailed explanation ] The problem is that the resulting routing table depends on the sequence of interface's initialization and in some situation, that would block all muticast packets. Suppose there are two interfaces on my computer (lo and eth0), if we initailize 'lo' before 'eth0', the resuting routing table(for multicast) would be # ip -6 route show | grep ff00:: unreachable ff00::/8 dev lo metric 256 error -101 ff00::/8 dev eth0 metric 256 When sending multicasting packets, routing subsystem will return the first route entry which with a error set to -101(ENETUNREACH). I know the kernel will set the default ipv6 address for 'lo' when it is up and won't set the default multicast route for it, but there is no reason to stop 'init' program from setting address for 'lo', and that is exactly what systemd did. I am sure there is something wrong with kernel or systemd, currently I preferred kernel caused this problem. ==================== Signed-off-by: Li Wei Signed-off-by: David S. Miller diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index cf88df8..36806de 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -1805,7 +1805,8 @@ static struct inet6_dev *addrconf_add_dev(struct net_device *dev) return ERR_PTR(-EACCES); /* Add default multicast route */ - addrconf_add_mroute(dev); + if (!(dev->flags & IFF_LOOPBACK)) + addrconf_add_mroute(dev); /* Add link local route */ addrconf_add_lroute(dev); -- cgit v0.10.2 From 72b36015ba43a3cca5303f5534d2c3e1899eae29 Mon Sep 17 00:00:00 2001 From: Ted Feng Date: Thu, 8 Dec 2011 00:46:21 +0000 Subject: ipip, sit: copy parms.name after register_netdevice Same fix as 731abb9cb2 for ipip and sit tunnel. Commit 1c5cae815d removed an explicit call to dev_alloc_name in ipip_tunnel_locate and ipip6_tunnel_locate, because register_netdevice will now create a valid name, however the tunnel keeps a copy of the name in the private parms structure. Fix this by copying the name back after register_netdevice has successfully returned. This shows up if you do a simple tunnel add, followed by a tunnel show: $ sudo ip tunnel add mode ipip remote 10.2.20.211 $ ip tunnel tunl0: ip/ip remote any local any ttl inherit nopmtudisc tunl%d: ip/ip remote 10.2.20.211 local any ttl inherit $ sudo ip tunnel add mode sit remote 10.2.20.212 $ ip tunnel sit0: ipv6/ip remote any local any ttl 64 nopmtudisc 6rd-prefix 2002::/16 sit%d: ioctl 89f8 failed: No such device sit%d: ipv6/ip remote 10.2.20.212 local any ttl inherit Cc: stable@vger.kernel.org Signed-off-by: Ted Feng Signed-off-by: David S. Miller diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c index 065effd..0b2e732 100644 --- a/net/ipv4/ipip.c +++ b/net/ipv4/ipip.c @@ -285,6 +285,8 @@ static struct ip_tunnel * ipip_tunnel_locate(struct net *net, if (register_netdevice(dev) < 0) goto failed_free; + strcpy(nt->parms.name, dev->name); + dev_hold(dev); ipip_tunnel_link(ipn, nt); return nt; @@ -759,7 +761,6 @@ static int ipip_tunnel_init(struct net_device *dev) struct ip_tunnel *tunnel = netdev_priv(dev); tunnel->dev = dev; - strcpy(tunnel->parms.name, dev->name); memcpy(dev->dev_addr, &tunnel->parms.iph.saddr, 4); memcpy(dev->broadcast, &tunnel->parms.iph.daddr, 4); @@ -825,6 +826,7 @@ static void ipip_destroy_tunnels(struct ipip_net *ipn, struct list_head *head) static int __net_init ipip_init_net(struct net *net) { struct ipip_net *ipn = net_generic(net, ipip_net_id); + struct ip_tunnel *t; int err; ipn->tunnels[0] = ipn->tunnels_wc; @@ -848,6 +850,9 @@ static int __net_init ipip_init_net(struct net *net) if ((err = register_netdev(ipn->fb_tunnel_dev))) goto err_reg_dev; + t = netdev_priv(ipn->fb_tunnel_dev); + + strcpy(t->parms.name, ipn->fb_tunnel_dev->name); return 0; err_reg_dev: diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c index a7a1860..96f3623 100644 --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -263,6 +263,8 @@ static struct ip_tunnel *ipip6_tunnel_locate(struct net *net, if (register_netdevice(dev) < 0) goto failed_free; + strcpy(nt->parms.name, dev->name); + dev_hold(dev); ipip6_tunnel_link(sitn, nt); @@ -1144,7 +1146,6 @@ static int ipip6_tunnel_init(struct net_device *dev) struct ip_tunnel *tunnel = netdev_priv(dev); tunnel->dev = dev; - strcpy(tunnel->parms.name, dev->name); memcpy(dev->dev_addr, &tunnel->parms.iph.saddr, 4); memcpy(dev->broadcast, &tunnel->parms.iph.daddr, 4); @@ -1207,6 +1208,7 @@ static void __net_exit sit_destroy_tunnels(struct sit_net *sitn, struct list_hea static int __net_init sit_init_net(struct net *net) { struct sit_net *sitn = net_generic(net, sit_net_id); + struct ip_tunnel *t; int err; sitn->tunnels[0] = sitn->tunnels_wc; @@ -1231,6 +1233,9 @@ static int __net_init sit_init_net(struct net *net) if ((err = register_netdev(sitn->fb_tunnel_dev))) goto err_reg_dev; + t = netdev_priv(sitn->fb_tunnel_dev); + + strcpy(t->parms.name, sitn->fb_tunnel_dev->name); return 0; err_reg_dev: -- cgit v0.10.2 From 3f1e6d3fd37bd4f25e5b19f1c7ca21850426c33f Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 11 Dec 2011 23:42:53 +0000 Subject: sch_gred: should not use GFP_KERNEL while holding a spinlock gred_change_vq() is called under sch_tree_lock(sch). This means a spinlock is held, and we are not allowed to sleep in this context. We might pre-allocate memory using GFP_KERNEL before taking spinlock, but this is not suitable for stable material. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/sched/sch_gred.c b/net/sched/sch_gred.c index b9493a0..6cd8ddf 100644 --- a/net/sched/sch_gred.c +++ b/net/sched/sch_gred.c @@ -385,7 +385,7 @@ static inline int gred_change_vq(struct Qdisc *sch, int dp, struct gred_sched_data *q; if (table->tab[dp] == NULL) { - table->tab[dp] = kzalloc(sizeof(*q), GFP_KERNEL); + table->tab[dp] = kzalloc(sizeof(*q), GFP_ATOMIC); if (table->tab[dp] == NULL) return -ENOMEM; } -- cgit v0.10.2 From bb3c36863e8001fc21a88bebfdead4da4c23e848 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 13 Dec 2011 17:35:06 -0500 Subject: ipv6: Check dest prefix length on original route not copied one in rt6_alloc_cow(). After commit 8e2ec639173f325977818c45011ee176ef2b11f6 ("ipv6: don't use inetpeer to store metrics for routes.") the test in rt6_alloc_cow() for setting the ANYCAST flag is now wrong. 'rt' will always now have a plen of 128, because it is set explicitly to 128 by ip6_rt_copy. So to restore the semantics of the test, check the destination prefix length of 'ort'. Signed-off-by: David S. Miller diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 3399dd3..b582a0a 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -728,7 +728,7 @@ static struct rt6_info *rt6_alloc_cow(const struct rt6_info *ort, int attempts = !in_softirq(); if (!(rt->rt6i_flags&RTF_GATEWAY)) { - if (rt->rt6i_dst.plen != 128 && + if (ort->rt6i_dst.plen != 128 && ipv6_addr_equal(&ort->rt6i_dst.addr, daddr)) rt->rt6i_flags |= RTF_ANYCAST; ipv6_addr_copy(&rt->rt6i_gateway, daddr); -- cgit v0.10.2