From 75f10b465af9efd59906e9079ed9cbda7e0f7a43 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 22 May 2008 16:20:18 +0100 Subject: [ARM] 5047/2: Support resetting by asserting GPIO pin This adds support for resetting via assertion of GPIO pin. This e.g. is used on Sharp Zaurus SL-6000. Signed-off-by: Dmitry Baryshkov Acked-by: Eric Miao Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 0e6d05b..c9e66fb 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -4,7 +4,7 @@ # Common support (must be linked before board specific support) obj-y += clock.o devices.o generic.o irq.o dma.o \ - time.o gpio.o + time.o gpio.o reset.o obj-$(CONFIG_PM) += pm.o sleep.o standby.o obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c new file mode 100644 index 0000000..551f313 --- /dev/null +++ b/arch/arm/mach-pxa/reset.c @@ -0,0 +1,95 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include + +#include + +static void do_hw_reset(void); + +static int reset_gpio = -1; + +int init_gpio_reset(int gpio) +{ + int rc; + + rc = gpio_request(gpio, "reset generator"); + if (rc) { + printk(KERN_ERR "Can't request reset_gpio\n"); + goto out; + } + + rc = gpio_direction_input(gpio); + if (rc) { + printk(KERN_ERR "Can't configure reset_gpio for input\n"); + gpio_free(gpio); + goto out; + } + +out: + if (!rc) + reset_gpio = gpio; + + return rc; +} + +/* + * Trigger GPIO reset. + * This covers various types of logic connecting gpio pin + * to RESET pins (nRESET or GPIO_RESET): + */ +static void do_gpio_reset(void) +{ + BUG_ON(reset_gpio == -1); + + /* drive it low */ + gpio_direction_output(reset_gpio, 0); + mdelay(2); + /* rising edge or drive high */ + gpio_set_value(reset_gpio, 1); + mdelay(2); + /* falling edge */ + gpio_set_value(reset_gpio, 0); + + /* give it some time */ + mdelay(10); + + WARN_ON(1); + /* fallback */ + do_hw_reset(); +} + +static void do_hw_reset(void) +{ + /* Initialize the watchdog and let it fire */ + OWER = OWER_WME; + OSSR = OSSR_M3; + OSMR3 = OSCR + 368640; /* ... in 100 ms */ +} + +void arch_reset(char mode) +{ + if (cpu_is_pxa2xx()) + RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; + + switch (mode) { + case 's': + /* Jump into ROM at address 0 */ + cpu_reset(0); + break; + case 'h': + do_hw_reset(); + break; + case 'g': + do_gpio_reset(); + break; + } +} + diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h index e25558f..5547ec7 100644 --- a/include/asm-arm/arch-pxa/hardware.h +++ b/include/asm-arm/arch-pxa/hardware.h @@ -205,6 +205,11 @@ static inline void __deprecated pxa_set_cken(int clock, int enable) */ extern unsigned int get_memclk_frequency_10khz(void); +/* + * register GPIO as reset generator + */ +extern int init_gpio_reset(int gpio); + #endif #if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) diff --git a/include/asm-arm/arch-pxa/system.h b/include/asm-arm/arch-pxa/system.h index 9aa6c2e..14894ae 100644 --- a/include/asm-arm/arch-pxa/system.h +++ b/include/asm-arm/arch-pxa/system.h @@ -20,19 +20,4 @@ static inline void arch_idle(void) } -static inline void arch_reset(char mode) -{ - if (cpu_is_pxa2xx()) - RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; - - if (mode == 's') { - /* Jump into ROM at address 0 */ - cpu_reset(0); - } else { - /* Initialize the watchdog and let it fire */ - OWER = OWER_WME; - OSSR = OSSR_M3; - OSMR3 = OSCR + 368640; /* ... in 100 ms */ - } -} - +void arch_reset(char mode); -- cgit v0.10.2 From 4d1fe075e5a84aaae00614cb23096336fda6374f Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Thu, 29 May 2008 21:18:07 +0100 Subject: [ARM] 5069/1: pxa: include pxa2xx-regs.h in reset.c for RSCR The RCSR definition was moved into pxa2xx-regs.h. Signed-off-by: Philipp Zabel Acked-by: Dmitry Baryshkov Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c index 551f313..9d39dea 100644 --- a/arch/arm/mach-pxa/reset.c +++ b/arch/arm/mach-pxa/reset.c @@ -11,6 +11,7 @@ #include #include +#include static void do_hw_reset(void); -- cgit v0.10.2 From 86159a98adbb33682a4658c9b1eae95d9c9e25ed Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 22 May 2008 16:21:48 +0100 Subject: [ARM] 5048/2: Clean up tosa and spitz resetting Use new reset_gpio to reset tosa and spitz PDAs. Signed-off-by: Dmitry Baryshkov Acked-by: Eric Miao Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index dace382..d58c3e9 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -530,11 +530,7 @@ static struct platform_device *devices[] __initdata = { static void spitz_poweroff(void) { - pxa_gpio_mode(SPITZ_GPIO_ON_RESET | GPIO_OUT); - GPSR(SPITZ_GPIO_ON_RESET) = GPIO_bit(SPITZ_GPIO_ON_RESET); - - mdelay(1000); - arm_machine_restart('h'); + arm_machine_restart('g'); } static void spitz_restart(char mode) @@ -548,6 +544,7 @@ static void spitz_restart(char mode) static void __init common_init(void) { + init_gpio_reset(SPITZ_GPIO_ON_RESET); pm_power_off = spitz_poweroff; arm_pm_restart = spitz_restart; diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index c2cbd66..9ae2271 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include @@ -467,11 +468,7 @@ static struct platform_device *devices[] __initdata = { static void tosa_poweroff(void) { - pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_OUT); - GPSR(TOSA_GPIO_ON_RESET) = GPIO_bit(TOSA_GPIO_ON_RESET); - - mdelay(1000); - arm_machine_restart('h'); + arm_machine_restart('g'); } static void tosa_restart(char mode) @@ -489,6 +486,8 @@ static void __init tosa_init(void) gpio_set_wake(MFP_PIN_GPIO1, 1); /* We can't pass to gpio-keys since it will drop the Reset altfunc */ + init_gpio_reset(TOSA_GPIO_ON_RESET); + pm_power_off = tosa_poweroff; arm_pm_restart = tosa_restart; -- cgit v0.10.2 From c867155cde9905dfbcb16fcadb1840b06f8869d4 Mon Sep 17 00:00:00 2001 From: eric miao Date: Mon, 26 May 2008 03:28:50 +0100 Subject: [ARM] 5064/1: pxa: explicitly specify tosa keyboard GPIOs' low power states to DRIVE_LOW Signed-off-by: Eric Miao Acked-by: Dmitry Baryshkov Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 9ae2271..8bf947d 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -130,24 +130,24 @@ static unsigned long tosa_pin_config[] = { GPIO47_STUART_TXD, /* Keybd */ - GPIO58_GPIO, - GPIO59_GPIO, - GPIO60_GPIO, - GPIO61_GPIO, - GPIO62_GPIO, - GPIO63_GPIO, - GPIO64_GPIO, - GPIO65_GPIO, - GPIO66_GPIO, - GPIO67_GPIO, - GPIO68_GPIO, - GPIO69_GPIO, - GPIO70_GPIO, - GPIO71_GPIO, - GPIO72_GPIO, - GPIO73_GPIO, - GPIO74_GPIO, - GPIO75_GPIO, + GPIO58_GPIO | MFP_LPM_DRIVE_LOW, + GPIO59_GPIO | MFP_LPM_DRIVE_LOW, + GPIO60_GPIO | MFP_LPM_DRIVE_LOW, + GPIO61_GPIO | MFP_LPM_DRIVE_LOW, + GPIO62_GPIO | MFP_LPM_DRIVE_LOW, + GPIO63_GPIO | MFP_LPM_DRIVE_LOW, + GPIO64_GPIO | MFP_LPM_DRIVE_LOW, + GPIO65_GPIO | MFP_LPM_DRIVE_LOW, + GPIO66_GPIO | MFP_LPM_DRIVE_LOW, + GPIO67_GPIO | MFP_LPM_DRIVE_LOW, + GPIO68_GPIO | MFP_LPM_DRIVE_LOW, + GPIO69_GPIO | MFP_LPM_DRIVE_LOW, + GPIO70_GPIO | MFP_LPM_DRIVE_LOW, + GPIO71_GPIO | MFP_LPM_DRIVE_LOW, + GPIO72_GPIO | MFP_LPM_DRIVE_LOW, + GPIO73_GPIO | MFP_LPM_DRIVE_LOW, + GPIO74_GPIO | MFP_LPM_DRIVE_LOW, + GPIO75_GPIO | MFP_LPM_DRIVE_LOW, /* SPI */ GPIO81_SSP2_CLK_OUT, diff --git a/drivers/input/keyboard/tosakbd.c b/drivers/input/keyboard/tosakbd.c index 94e444b..b12b7ee 100644 --- a/drivers/input/keyboard/tosakbd.c +++ b/drivers/input/keyboard/tosakbd.c @@ -215,8 +215,6 @@ static int tosakbd_suspend(struct platform_device *dev, pm_message_t state) unsigned long flags; spin_lock_irqsave(&tosakbd->lock, flags); - PGSR1 = (PGSR1 & ~TOSA_GPIO_LOW_STROBE_BIT); - PGSR2 = (PGSR2 & ~TOSA_GPIO_HIGH_STROBE_BIT); tosakbd->suspended = 1; spin_unlock_irqrestore(&tosakbd->lock, flags); -- cgit v0.10.2 From c4d5f8d43a5423a6bbba4eec1fab9c46e8d53c5d Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Mon, 9 Jun 2008 13:23:50 +0100 Subject: [ARM] 5081/1: tosa: fix SD GPIOs This changes SD-related GPIO names to be more informative, and allocates two more SD-related GPIOs. Signed-off-by: Dmitry Baryshkov Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 8bf947d..ba95cd6 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -87,7 +87,7 @@ static unsigned long tosa_pin_config[] = { GPIO6_MMC_CLK, GPIO8_MMC_CS0, GPIO9_GPIO, /* Detect */ - // GPIO10 nSD_INT + GPIO10_GPIO, /* nSD_INT */ /* CF */ GPIO13_GPIO, /* CD_IRQ */ @@ -250,6 +250,15 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250); + err = gpio_request(TOSA_GPIO_nSD_DETECT, "MMC/SD card detect"); + if (err) { + printk(KERN_ERR "tosa_mci_init: can't request nSD_DETECT gpio\n"); + goto err_gpio_detect; + } + err = gpio_direction_input(TOSA_GPIO_nSD_DETECT); + if (err) + goto err_gpio_detect_dir; + err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "MMC/SD card detect", data); @@ -258,7 +267,7 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void goto err_irq; } - err = gpio_request(TOSA_GPIO_SD_WP, "sd_wp"); + err = gpio_request(TOSA_GPIO_SD_WP, "SD Write Protect"); if (err) { printk(KERN_ERR "tosa_mci_init: can't request SD_WP gpio\n"); goto err_gpio_wp; @@ -267,7 +276,7 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void if (err) goto err_gpio_wp_dir; - err = gpio_request(TOSA_GPIO_PWR_ON, "sd_pwr"); + err = gpio_request(TOSA_GPIO_PWR_ON, "SD Power"); if (err) { printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n"); goto err_gpio_pwr; @@ -276,8 +285,20 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void if (err) goto err_gpio_pwr_dir; + err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int"); + if (err) { + printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n"); + goto err_gpio_int; + } + err = gpio_direction_input(TOSA_GPIO_nSD_INT); + if (err) + goto err_gpio_int_dir; + return 0; +err_gpio_int_dir: + gpio_free(TOSA_GPIO_nSD_INT); +err_gpio_int: err_gpio_pwr_dir: gpio_free(TOSA_GPIO_PWR_ON); err_gpio_pwr: @@ -286,6 +307,9 @@ err_gpio_wp_dir: err_gpio_wp: free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data); err_irq: +err_gpio_detect_dir: + gpio_free(TOSA_GPIO_nSD_DETECT); +err_gpio_detect: return err; } @@ -307,9 +331,11 @@ static int tosa_mci_get_ro(struct device *dev) static void tosa_mci_exit(struct device *dev, void *data) { + gpio_free(TOSA_GPIO_nSD_INT); gpio_free(TOSA_GPIO_PWR_ON); gpio_free(TOSA_GPIO_SD_WP); free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data); + gpio_free(TOSA_GPIO_nSD_DETECT); } static struct pxamci_platform_data tosa_mci_platform_data = { -- cgit v0.10.2 From debba222b20c7e98d7875d9c70552b3094038ab2 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Wed, 11 Jun 2008 13:27:24 +0100 Subject: [ARM] 5089/1: tosa: cleanup includes Signed-off-by: Dmitry Baryshkov Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index ba95cd6..9892464 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -24,15 +24,9 @@ #include #include #include -#include #include -#include #include -#include -#include -#include -#include #include #include #include @@ -41,8 +35,6 @@ #include #include -#include -#include #include #include -- cgit v0.10.2 From b032fccca80cbbedaa80e5a72a202a43f08aa97e Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 12 Jun 2008 11:42:07 +0100 Subject: [ARM] 5083/2: Tosa: fix IrDA transciver powerup. On tosa the tranciver LED isn't powered down if the GPIO47 (STUART_TX) isn't configured as low-level. Power it down if IrDA is off to save a bit of power. Signed-off-by: Dmitry Baryshkov Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 9892464..7a89f76 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -117,10 +117,6 @@ static unsigned long tosa_pin_config[] = { GPIO44_BTUART_CTS, GPIO45_BTUART_RTS, - /* IrDA */ - GPIO46_STUART_RXD, - GPIO47_STUART_TXD, - /* Keybd */ GPIO58_GPIO | MFP_LPM_DRIVE_LOW, GPIO59_GPIO | MFP_LPM_DRIVE_LOW, @@ -147,6 +143,17 @@ static unsigned long tosa_pin_config[] = { GPIO83_SSP2_TXD, }; +static unsigned long tosa_pin_irda_off[] = { + GPIO46_STUART_RXD, + GPIO47_GPIO | MFP_LPM_DRIVE_LOW, +}; + +static unsigned long tosa_pin_irda_on[] = { + GPIO46_STUART_RXD, + GPIO47_STUART_TXD, +}; + + /* * SCOOP Device */ @@ -341,29 +348,55 @@ static struct pxamci_platform_data tosa_mci_platform_data = { /* * Irda */ +static void tosa_irda_transceiver_mode(struct device *dev, int mode) +{ + if (mode & IR_OFF) { + gpio_set_value(TOSA_GPIO_IR_POWERDWN, 0); + pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_irda_off)); + gpio_direction_output(TOSA_GPIO_IRDA_TX, 0); + } else { + pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_irda_on)); + gpio_set_value(TOSA_GPIO_IR_POWERDWN, 1); + } +} + static int tosa_irda_startup(struct device *dev) { int ret; + ret = gpio_request(TOSA_GPIO_IRDA_TX, "IrDA TX"); + if (ret) + goto err_tx; + ret = gpio_direction_output(TOSA_GPIO_IRDA_TX, 0); + if (ret) + goto err_tx_dir; + ret = gpio_request(TOSA_GPIO_IR_POWERDWN, "IrDA powerdown"); if (ret) - return ret; + goto err_pwr; ret = gpio_direction_output(TOSA_GPIO_IR_POWERDWN, 0); if (ret) - gpio_free(TOSA_GPIO_IR_POWERDWN); + goto err_pwr_dir; - return ret; - } + tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF); -static void tosa_irda_shutdown(struct device *dev) -{ + return 0; + +err_pwr_dir: gpio_free(TOSA_GPIO_IR_POWERDWN); +err_pwr: +err_tx_dir: + gpio_free(TOSA_GPIO_IRDA_TX); +err_tx: + return ret; } -static void tosa_irda_transceiver_mode(struct device *dev, int mode) +static void tosa_irda_shutdown(struct device *dev) { - gpio_set_value(TOSA_GPIO_IR_POWERDWN, !(mode & IR_OFF)); + tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF); + gpio_free(TOSA_GPIO_IR_POWERDWN); + gpio_free(TOSA_GPIO_IRDA_TX); } static struct pxaficp_platform_data tosa_ficp_platform_data = { @@ -501,6 +534,7 @@ static void tosa_restart(char mode) static void __init tosa_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config)); + pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_irda_off)); gpio_set_wake(MFP_PIN_GPIO1, 1); /* We can't pass to gpio-keys since it will drop the Reset altfunc */ diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h index c5b6fde..1882262 100644 --- a/include/asm-arm/arch-pxa/tosa.h +++ b/include/asm-arm/arch-pxa/tosa.h @@ -99,6 +99,7 @@ #define TOSA_GPIO_TP_INT (32) /* Touch Panel pen down interrupt */ #define TOSA_GPIO_JC_CF_IRQ (36) /* CF slot1 Ready */ #define TOSA_GPIO_BAT_LOCKED (38) /* Battery locked */ +#define TOSA_GPIO_IRDA_TX (47) #define TOSA_GPIO_TG_SPI_SCLK (81) #define TOSA_GPIO_TG_SPI_CS (82) #define TOSA_GPIO_TG_SPI_MOSI (83) -- cgit v0.10.2 From d6315949ac5527efd00d48283a9e33361c86e8e9 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Sun, 22 Jun 2008 12:01:58 +0100 Subject: [ARM] 5096/2: Support Toshiba TC6393XB Mobile I/O Controller. Add support for Toshiba TC6393XB companion chip. Currently only GPIO and part of IRQ features of the device are supported. Signed-off-by: Dmitry Baryshkov Signed-off-by: Russell King diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 2566479..1a1ac26 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -38,6 +38,12 @@ config HTC_PASIC3 HTC Magician devices, respectively. Actual functionality is handled by the leds-pasic3 and ds1wm drivers. +config MFD_TC6393XB + bool "Support Toshiba TC6393XB" + depends on HAVE_GPIO_LIB + help + Support for Toshiba Mobile IO Controller TC6393XB + endmenu menu "Multimedia Capabilities Port drivers" diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index eef4e26..b416844 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -8,6 +8,8 @@ obj-$(CONFIG_MFD_ASIC3) += asic3.o obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o +obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o + obj-$(CONFIG_MCP) += mcp-core.o obj-$(CONFIG_MCP_SA11X0) += mcp-sa11x0.o obj-$(CONFIG_MCP_UCB1200) += ucb1x00-core.o diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c new file mode 100644 index 0000000..4d7192e --- /dev/null +++ b/drivers/mfd/tc6393xb.c @@ -0,0 +1,537 @@ +/* + * Toshiba TC6393XB SoC support + * + * Copyright(c) 2005-2006 Chris Humbert + * Copyright(c) 2005 Dirk Opfer + * Copyright(c) 2005 Ian Molton + * Copyright(c) 2007 Dmitry Baryshkov + * + * Based on code written by Sharp/Lineo for 2.4 kernels + * Based on locomo.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define SCR_REVID 0x08 /* b Revision ID */ +#define SCR_ISR 0x50 /* b Interrupt Status */ +#define SCR_IMR 0x52 /* b Interrupt Mask */ +#define SCR_IRR 0x54 /* b Interrupt Routing */ +#define SCR_GPER 0x60 /* w GP Enable */ +#define SCR_GPI_SR(i) (0x64 + (i)) /* b3 GPI Status */ +#define SCR_GPI_IMR(i) (0x68 + (i)) /* b3 GPI INT Mask */ +#define SCR_GPI_EDER(i) (0x6c + (i)) /* b3 GPI Edge Detect Enable */ +#define SCR_GPI_LIR(i) (0x70 + (i)) /* b3 GPI Level Invert */ +#define SCR_GPO_DSR(i) (0x78 + (i)) /* b3 GPO Data Set */ +#define SCR_GPO_DOECR(i) (0x7c + (i)) /* b3 GPO Data OE Control */ +#define SCR_GP_IARCR(i) (0x80 + (i)) /* b3 GP Internal Active Register Control */ +#define SCR_GP_IARLCR(i) (0x84 + (i)) /* b3 GP INTERNAL Active Register Level Control */ +#define SCR_GPI_BCR(i) (0x88 + (i)) /* b3 GPI Buffer Control */ +#define SCR_GPA_IARCR 0x8c /* w GPa Internal Active Register Control */ +#define SCR_GPA_IARLCR 0x90 /* w GPa Internal Active Register Level Control */ +#define SCR_GPA_BCR 0x94 /* w GPa Buffer Control */ +#define SCR_CCR 0x98 /* w Clock Control */ +#define SCR_PLL2CR 0x9a /* w PLL2 Control */ +#define SCR_PLL1CR 0x9c /* l PLL1 Control */ +#define SCR_DIARCR 0xa0 /* b Device Internal Active Register Control */ +#define SCR_DBOCR 0xa1 /* b Device Buffer Off Control */ +#define SCR_FER 0xe0 /* b Function Enable */ +#define SCR_MCR 0xe4 /* w Mode Control */ +#define SCR_CONFIG 0xfc /* b Configuration Control */ +#define SCR_DEBUG 0xff /* b Debug */ + +#define SCR_CCR_CK32K BIT(0) +#define SCR_CCR_USBCK BIT(1) +#define SCR_CCR_UNK1 BIT(4) +#define SCR_CCR_MCLK_MASK (7 << 8) +#define SCR_CCR_MCLK_OFF (0 << 8) +#define SCR_CCR_MCLK_12 (1 << 8) +#define SCR_CCR_MCLK_24 (2 << 8) +#define SCR_CCR_MCLK_48 (3 << 8) +#define SCR_CCR_HCLK_MASK (3 << 12) +#define SCR_CCR_HCLK_24 (0 << 12) +#define SCR_CCR_HCLK_48 (1 << 12) + +#define SCR_FER_USBEN BIT(0) /* USB host enable */ +#define SCR_FER_LCDCVEN BIT(1) /* polysilicon TFT enable */ +#define SCR_FER_SLCDEN BIT(2) /* SLCD enable */ + +#define SCR_MCR_RDY_MASK (3 << 0) +#define SCR_MCR_RDY_OPENDRAIN (0 << 0) +#define SCR_MCR_RDY_TRISTATE (1 << 0) +#define SCR_MCR_RDY_PUSHPULL (2 << 0) +#define SCR_MCR_RDY_UNK BIT(2) +#define SCR_MCR_RDY_EN BIT(3) +#define SCR_MCR_INT_MASK (3 << 4) +#define SCR_MCR_INT_OPENDRAIN (0 << 4) +#define SCR_MCR_INT_TRISTATE (1 << 4) +#define SCR_MCR_INT_PUSHPULL (2 << 4) +#define SCR_MCR_INT_UNK BIT(6) +#define SCR_MCR_INT_EN BIT(7) +/* bits 8 - 16 are unknown */ + +#define TC_GPIO_BIT(i) (1 << (i & 0x7)) + +/*--------------------------------------------------------------------------*/ + +struct tc6393xb { + void __iomem *scr; + + struct gpio_chip gpio; + + struct clk *clk; /* 3,6 Mhz */ + + spinlock_t lock; /* protects RMW cycles */ + + struct { + u8 fer; + u16 ccr; + u8 gpi_bcr[3]; + u8 gpo_dsr[3]; + u8 gpo_doecr[3]; + } suspend_state; + + struct resource rscr; + struct resource *iomem; + int irq; + int irq_base; +}; + +/*--------------------------------------------------------------------------*/ + +static int tc6393xb_gpio_get(struct gpio_chip *chip, + unsigned offset) +{ + struct tc6393xb *tc6393xb = container_of(chip, struct tc6393xb, gpio); + + /* XXX: does dsr also represent inputs? */ + return ioread8(tc6393xb->scr + SCR_GPO_DSR(offset / 8)) + & TC_GPIO_BIT(offset); +} + +static void __tc6393xb_gpio_set(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct tc6393xb *tc6393xb = container_of(chip, struct tc6393xb, gpio); + u8 dsr; + + dsr = ioread8(tc6393xb->scr + SCR_GPO_DSR(offset / 8)); + if (value) + dsr |= TC_GPIO_BIT(offset); + else + dsr &= ~TC_GPIO_BIT(offset); + + iowrite8(dsr, tc6393xb->scr + SCR_GPO_DSR(offset / 8)); +} + +static void tc6393xb_gpio_set(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct tc6393xb *tc6393xb = container_of(chip, struct tc6393xb, gpio); + unsigned long flags; + + spin_lock_irqsave(&tc6393xb->lock, flags); + + __tc6393xb_gpio_set(chip, offset, value); + + spin_unlock_irqrestore(&tc6393xb->lock, flags); +} + +static int tc6393xb_gpio_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + struct tc6393xb *tc6393xb = container_of(chip, struct tc6393xb, gpio); + unsigned long flags; + u8 doecr; + + spin_lock_irqsave(&tc6393xb->lock, flags); + + doecr = ioread8(tc6393xb->scr + SCR_GPO_DOECR(offset / 8)); + doecr &= ~TC_GPIO_BIT(offset); + iowrite8(doecr, tc6393xb->scr + SCR_GPO_DOECR(offset / 8)); + + spin_unlock_irqrestore(&tc6393xb->lock, flags); + + return 0; +} + +static int tc6393xb_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct tc6393xb *tc6393xb = container_of(chip, struct tc6393xb, gpio); + unsigned long flags; + u8 doecr; + + spin_lock_irqsave(&tc6393xb->lock, flags); + + __tc6393xb_gpio_set(chip, offset, value); + + doecr = ioread8(tc6393xb->scr + SCR_GPO_DOECR(offset / 8)); + doecr |= TC_GPIO_BIT(offset); + iowrite8(doecr, tc6393xb->scr + SCR_GPO_DOECR(offset / 8)); + + spin_unlock_irqrestore(&tc6393xb->lock, flags); + + return 0; +} + +static int tc6393xb_register_gpio(struct tc6393xb *tc6393xb, int gpio_base) +{ + tc6393xb->gpio.label = "tc6393xb"; + tc6393xb->gpio.base = gpio_base; + tc6393xb->gpio.ngpio = 16; + tc6393xb->gpio.set = tc6393xb_gpio_set; + tc6393xb->gpio.get = tc6393xb_gpio_get; + tc6393xb->gpio.direction_input = tc6393xb_gpio_direction_input; + tc6393xb->gpio.direction_output = tc6393xb_gpio_direction_output; + + return gpiochip_add(&tc6393xb->gpio); +} + +/*--------------------------------------------------------------------------*/ + +static void +tc6393xb_irq(unsigned int irq, struct irq_desc *desc) +{ + struct tc6393xb *tc6393xb = get_irq_data(irq); + unsigned int isr; + unsigned int i, irq_base; + + irq_base = tc6393xb->irq_base; + + while ((isr = ioread8(tc6393xb->scr + SCR_ISR) & + ~ioread8(tc6393xb->scr + SCR_IMR))) + for (i = 0; i < TC6393XB_NR_IRQS; i++) { + if (isr & (1 << i)) + generic_handle_irq(irq_base + i); + } +} + +static void tc6393xb_irq_ack(unsigned int irq) +{ +} + +static void tc6393xb_irq_mask(unsigned int irq) +{ + struct tc6393xb *tc6393xb = get_irq_chip_data(irq); + unsigned long flags; + u8 imr; + + spin_lock_irqsave(&tc6393xb->lock, flags); + imr = ioread8(tc6393xb->scr + SCR_IMR); + imr |= 1 << (irq - tc6393xb->irq_base); + iowrite8(imr, tc6393xb->scr + SCR_IMR); + spin_unlock_irqrestore(&tc6393xb->lock, flags); +} + +static void tc6393xb_irq_unmask(unsigned int irq) +{ + struct tc6393xb *tc6393xb = get_irq_chip_data(irq); + unsigned long flags; + u8 imr; + + spin_lock_irqsave(&tc6393xb->lock, flags); + imr = ioread8(tc6393xb->scr + SCR_IMR); + imr &= ~(1 << (irq - tc6393xb->irq_base)); + iowrite8(imr, tc6393xb->scr + SCR_IMR); + spin_unlock_irqrestore(&tc6393xb->lock, flags); +} + +static struct irq_chip tc6393xb_chip = { + .name = "tc6393xb", + .ack = tc6393xb_irq_ack, + .mask = tc6393xb_irq_mask, + .unmask = tc6393xb_irq_unmask, +}; + +static void tc6393xb_attach_irq(struct platform_device *dev) +{ + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + unsigned int irq, irq_base; + + irq_base = tc6393xb->irq_base; + + for (irq = irq_base; irq < irq_base + TC6393XB_NR_IRQS; irq++) { + set_irq_chip(irq, &tc6393xb_chip); + set_irq_chip_data(irq, tc6393xb); + set_irq_handler(irq, handle_edge_irq); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + } + + set_irq_type(tc6393xb->irq, IRQT_FALLING); + set_irq_data(tc6393xb->irq, tc6393xb); + set_irq_chained_handler(tc6393xb->irq, tc6393xb_irq); +} + +static void tc6393xb_detach_irq(struct platform_device *dev) +{ + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + unsigned int irq, irq_base; + + set_irq_chained_handler(tc6393xb->irq, NULL); + set_irq_data(tc6393xb->irq, NULL); + + irq_base = tc6393xb->irq_base; + + for (irq = irq_base; irq < irq_base + TC6393XB_NR_IRQS; irq++) { + set_irq_flags(irq, 0); + set_irq_chip(irq, NULL); + set_irq_chip_data(irq, NULL); + } +} + +/*--------------------------------------------------------------------------*/ + +static int tc6393xb_hw_init(struct platform_device *dev) +{ + struct tc6393xb_platform_data *tcpd = dev->dev.platform_data; + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + int i; + + iowrite8(tc6393xb->suspend_state.fer, tc6393xb->scr + SCR_FER); + iowrite16(tcpd->scr_pll2cr, tc6393xb->scr + SCR_PLL2CR); + iowrite16(tc6393xb->suspend_state.ccr, tc6393xb->scr + SCR_CCR); + iowrite16(SCR_MCR_RDY_OPENDRAIN | SCR_MCR_RDY_UNK | SCR_MCR_RDY_EN | + SCR_MCR_INT_OPENDRAIN | SCR_MCR_INT_UNK | SCR_MCR_INT_EN | + BIT(15), tc6393xb->scr + SCR_MCR); + iowrite16(tcpd->scr_gper, tc6393xb->scr + SCR_GPER); + iowrite8(0, tc6393xb->scr + SCR_IRR); + iowrite8(0xbf, tc6393xb->scr + SCR_IMR); + + for (i = 0; i < 3; i++) { + iowrite8(tc6393xb->suspend_state.gpo_dsr[i], + tc6393xb->scr + SCR_GPO_DSR(i)); + iowrite8(tc6393xb->suspend_state.gpo_doecr[i], + tc6393xb->scr + SCR_GPO_DOECR(i)); + iowrite8(tc6393xb->suspend_state.gpi_bcr[i], + tc6393xb->scr + SCR_GPI_BCR(i)); + } + + return 0; +} + +static int __devinit tc6393xb_probe(struct platform_device *dev) +{ + struct tc6393xb_platform_data *tcpd = dev->dev.platform_data; + struct tc6393xb *tc6393xb; + struct resource *iomem; + struct resource *rscr; + int retval, temp; + int i; + + iomem = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!iomem) + return -EINVAL; + + tc6393xb = kzalloc(sizeof *tc6393xb, GFP_KERNEL); + if (!tc6393xb) { + retval = -ENOMEM; + goto err_kzalloc; + } + + spin_lock_init(&tc6393xb->lock); + + platform_set_drvdata(dev, tc6393xb); + tc6393xb->iomem = iomem; + tc6393xb->irq = platform_get_irq(dev, 0); + tc6393xb->irq_base = tcpd->irq_base; + + tc6393xb->clk = clk_get(&dev->dev, "GPIO27_CLK" /* "CK3P6MI" */); + if (IS_ERR(tc6393xb->clk)) { + retval = PTR_ERR(tc6393xb->clk); + goto err_clk_get; + } + + rscr = &tc6393xb->rscr; + rscr->name = "tc6393xb-core"; + rscr->start = iomem->start; + rscr->end = iomem->start + 0xff; + rscr->flags = IORESOURCE_MEM; + + retval = request_resource(iomem, rscr); + if (retval) + goto err_request_scr; + + tc6393xb->scr = ioremap(rscr->start, rscr->end - rscr->start + 1); + if (!tc6393xb->scr) { + retval = -ENOMEM; + goto err_ioremap; + } + + retval = clk_enable(tc6393xb->clk); + if (retval) + goto err_clk_enable; + + retval = tcpd->enable(dev); + if (retval) + goto err_enable; + + tc6393xb->suspend_state.fer = 0; + for (i = 0; i < 3; i++) { + tc6393xb->suspend_state.gpo_dsr[i] = + (tcpd->scr_gpo_dsr >> (8 * i)) & 0xff; + tc6393xb->suspend_state.gpo_doecr[i] = + (tcpd->scr_gpo_doecr >> (8 * i)) & 0xff; + } + /* + * It may be necessary to change this back to + * platform-dependant code + */ + tc6393xb->suspend_state.ccr = SCR_CCR_UNK1 | + SCR_CCR_HCLK_48; + + retval = tc6393xb_hw_init(dev); + if (retval) + goto err_hw_init; + + printk(KERN_INFO "Toshiba tc6393xb revision %d at 0x%08lx, irq %d\n", + ioread8(tc6393xb->scr + SCR_REVID), + (unsigned long) iomem->start, tc6393xb->irq); + + tc6393xb->gpio.base = -1; + + if (tcpd->gpio_base >= 0) { + retval = tc6393xb_register_gpio(tc6393xb, tcpd->gpio_base); + if (retval) + goto err_gpio_add; + } + + if (tc6393xb->irq) + tc6393xb_attach_irq(dev); + + return 0; + + if (tc6393xb->irq) + tc6393xb_detach_irq(dev); + +err_gpio_add: + if (tc6393xb->gpio.base != -1) + temp = gpiochip_remove(&tc6393xb->gpio); +err_hw_init: + tcpd->disable(dev); +err_clk_enable: + clk_disable(tc6393xb->clk); +err_enable: + iounmap(tc6393xb->scr); +err_ioremap: + release_resource(&tc6393xb->rscr); +err_request_scr: + clk_put(tc6393xb->clk); +err_clk_get: + kfree(tc6393xb); +err_kzalloc: + return retval; +} + +static int __devexit tc6393xb_remove(struct platform_device *dev) +{ + struct tc6393xb_platform_data *tcpd = dev->dev.platform_data; + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + int ret; + + if (tc6393xb->irq) + tc6393xb_detach_irq(dev); + + if (tc6393xb->gpio.base != -1) { + ret = gpiochip_remove(&tc6393xb->gpio); + if (ret) { + dev_err(&dev->dev, "Can't remove gpio chip: %d\n", ret); + return ret; + } + } + + ret = tcpd->disable(dev); + + clk_disable(tc6393xb->clk); + + iounmap(tc6393xb->scr); + + release_resource(&tc6393xb->rscr); + + platform_set_drvdata(dev, NULL); + + clk_put(tc6393xb->clk); + + kfree(tc6393xb); + + return ret; +} + +#ifdef CONFIG_PM +static int tc6393xb_suspend(struct platform_device *dev, pm_message_t state) +{ + struct tc6393xb_platform_data *tcpd = dev->dev.platform_data; + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + int i; + + + tc6393xb->suspend_state.ccr = ioread16(tc6393xb->scr + SCR_CCR); + tc6393xb->suspend_state.fer = ioread8(tc6393xb->scr + SCR_FER); + + for (i = 0; i < 3; i++) { + tc6393xb->suspend_state.gpo_dsr[i] = + ioread8(tc6393xb->scr + SCR_GPO_DSR(i)); + tc6393xb->suspend_state.gpo_doecr[i] = + ioread8(tc6393xb->scr + SCR_GPO_DOECR(i)); + tc6393xb->suspend_state.gpi_bcr[i] = + ioread8(tc6393xb->scr + SCR_GPI_BCR(i)); + } + + return tcpd->suspend(dev); +} + +static int tc6393xb_resume(struct platform_device *dev) +{ + struct tc6393xb_platform_data *tcpd = dev->dev.platform_data; + int ret = tcpd->resume(dev); + + if (ret) + return ret; + + return tc6393xb_hw_init(dev); +} +#else +#define tc6393xb_suspend NULL +#define tc6393xb_resume NULL +#endif + +static struct platform_driver tc6393xb_driver = { + .probe = tc6393xb_probe, + .remove = __devexit_p(tc6393xb_remove), + .suspend = tc6393xb_suspend, + .resume = tc6393xb_resume, + + .driver = { + .name = "tc6393xb", + .owner = THIS_MODULE, + }, +}; + +static int __init tc6393xb_init(void) +{ + return platform_driver_register(&tc6393xb_driver); +} + +static void __exit tc6393xb_exit(void) +{ + platform_driver_unregister(&tc6393xb_driver); +} + +subsys_initcall(tc6393xb_init); +module_exit(tc6393xb_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ian Molton, Dmitry Baryshkov and Dirk Opfer"); +MODULE_DESCRIPTION("tc6393xb Toshiba Mobile IO Controller"); +MODULE_ALIAS("platform:tc6393xb"); diff --git a/include/linux/mfd/tc6393xb.h b/include/linux/mfd/tc6393xb.h new file mode 100644 index 0000000..0e3dd4c --- /dev/null +++ b/include/linux/mfd/tc6393xb.h @@ -0,0 +1,47 @@ +/* + * Toshiba TC6393XB SoC support + * + * Copyright(c) 2005-2006 Chris Humbert + * Copyright(c) 2005 Dirk Opfer + * Copyright(c) 2005 Ian Molton + * Copyright(c) 2007 Dmitry Baryshkov + * + * Based on code written by Sharp/Lineo for 2.4 kernels + * Based on locomo.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef TC6393XB_H +#define TC6393XB_H + +/* Also one should provide the CK3P6MI clock */ +struct tc6393xb_platform_data { + u16 scr_pll2cr; /* PLL2 Control */ + u16 scr_gper; /* GP Enable */ + u32 scr_gpo_doecr; /* GPO Data OE Control */ + u32 scr_gpo_dsr; /* GPO Data Set */ + + int (*enable)(struct platform_device *dev); + int (*disable)(struct platform_device *dev); + int (*suspend)(struct platform_device *dev); + int (*resume)(struct platform_device *dev); + + int irq_base; /* a base for cascaded irq */ + int gpio_base; +}; + +/* + * Relative to irq_base + */ +#define IRQ_TC6393_NAND 0 +#define IRQ_TC6393_MMC 1 +#define IRQ_TC6393_OHCI 2 +#define IRQ_TC6393_SERIAL 3 +#define IRQ_TC6393_FB 4 + +#define TC6393XB_NR_IRQS 8 + +#endif -- cgit v0.10.2 From bf0116e54e185fd63025f2b975f0f1616ffe41f1 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Sat, 14 Jun 2008 11:42:02 +0100 Subject: [ARM] 5097/1: Tosa: support TC6393XB device Add definitions for Toshiba TC6393XB companion chip and register the tc6393xb device. Signed-off-by: Dmitry Baryshkov Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 7a89f76..2fe0998 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -18,7 +18,10 @@ #include #include #include +#include +#include #include +#include #include #include #include @@ -509,9 +512,127 @@ static struct platform_device tosaled_device = { }, }; +/* + * Toshiba Mobile IO Controller + */ +static struct resource tc6393xb_resources[] = { + [0] = { + .start = TOSA_LCDC_PHYS, + .end = TOSA_LCDC_PHYS + 0x3ffffff, + .flags = IORESOURCE_MEM, + }, + + [1] = { + .start = TOSA_IRQ_GPIO_TC6393XB_INT, + .end = TOSA_IRQ_GPIO_TC6393XB_INT, + .flags = IORESOURCE_IRQ, + }, +}; + + +static int tosa_tc6393xb_enable(struct platform_device *dev) +{ + int rc; + + rc = gpio_request(TOSA_GPIO_TC6393XB_REST_IN, "tc6393xb #pclr"); + if (rc) + goto err_req_pclr; + rc = gpio_request(TOSA_GPIO_TC6393XB_SUSPEND, "tc6393xb #suspend"); + if (rc) + goto err_req_suspend; + rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "l3v"); + if (rc) + goto err_req_l3v; + rc = gpio_direction_output(TOSA_GPIO_TC6393XB_L3V_ON, 0); + if (rc) + goto err_dir_l3v; + rc = gpio_direction_output(TOSA_GPIO_TC6393XB_SUSPEND, 0); + if (rc) + goto err_dir_suspend; + rc = gpio_direction_output(TOSA_GPIO_TC6393XB_REST_IN, 0); + if (rc) + goto err_dir_pclr; + + mdelay(1); + + gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1); + + mdelay(10); + + gpio_set_value(TOSA_GPIO_TC6393XB_REST_IN, 1); + gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1); + + return 0; +err_dir_pclr: +err_dir_suspend: +err_dir_l3v: + gpio_free(TOSA_GPIO_TC6393XB_L3V_ON); +err_req_l3v: + gpio_free(TOSA_GPIO_TC6393XB_SUSPEND); +err_req_suspend: + gpio_free(TOSA_GPIO_TC6393XB_REST_IN); +err_req_pclr: + return rc; +} + +static int tosa_tc6393xb_disable(struct platform_device *dev) +{ + gpio_free(TOSA_GPIO_TC6393XB_L3V_ON); + gpio_free(TOSA_GPIO_TC6393XB_SUSPEND); + gpio_free(TOSA_GPIO_TC6393XB_REST_IN); + + return 0; +} + +static int tosa_tc6393xb_resume(struct platform_device *dev) +{ + gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1); + mdelay(10); + gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1); + mdelay(10); + + return 0; +} + +static int tosa_tc6393xb_suspend(struct platform_device *dev) +{ + gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 0); + gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 0); + return 0; +} + +static struct tc6393xb_platform_data tosa_tc6393xb_setup = { + .scr_pll2cr = 0x0cc1, + .scr_gper = 0x3300, + .scr_gpo_dsr = + TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON), + .scr_gpo_doecr = + TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON), + + .irq_base = IRQ_BOARD_START, + .gpio_base = TOSA_TC6393XB_GPIO_BASE, + + .enable = tosa_tc6393xb_enable, + .disable = tosa_tc6393xb_disable, + .suspend = tosa_tc6393xb_suspend, + .resume = tosa_tc6393xb_resume, +}; + + +static struct platform_device tc6393xb_device = { + .name = "tc6393xb", + .id = -1, + .dev = { + .platform_data = &tosa_tc6393xb_setup, + }, + .num_resources = ARRAY_SIZE(tc6393xb_resources), + .resource = tc6393xb_resources, +}; + static struct platform_device *devices[] __initdata = { &tosascoop_device, &tosascoop_jc_device, + &tc6393xb_device, &tosakbd_device, &tosa_gpio_keys_device, &tosaled_device, @@ -533,6 +654,8 @@ static void tosa_restart(char mode) static void __init tosa_init(void) { + int dummy; + pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config)); pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_irda_off)); gpio_set_wake(MFP_PIN_GPIO1, 1); @@ -548,6 +671,10 @@ static void __init tosa_init(void) /* enable batt_fault */ PMCR = 0x01; + dummy = gpiochip_reserve(TOSA_SCOOP_GPIO_BASE, 12); + dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12); + dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16); + pxa_set_mci_info(&tosa_mci_platform_data); pxa_set_udc_info(&udc_info); pxa_set_ficp_info(&tosa_ficp_platform_data); diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h index b6c8fe3..fa05e76 100644 --- a/include/asm-arm/arch-pxa/irqs.h +++ b/include/asm-arm/arch-pxa/irqs.h @@ -180,6 +180,7 @@ #define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1) #elif defined(CONFIG_ARCH_LUBBOCK) || \ defined(CONFIG_MACH_LOGICPD_PXA270) || \ + defined(CONFIG_MACH_TOSA) || \ defined(CONFIG_MACH_MAINSTONE) || \ defined(CONFIG_MACH_PCM027) || \ defined(CONFIG_MACH_MAGICIAN) diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h index 1882262..a16c103 100644 --- a/include/asm-arm/arch-pxa/tosa.h +++ b/include/asm-arm/arch-pxa/tosa.h @@ -25,7 +25,7 @@ */ #define TOSA_SCOOP_GPIO_BASE NR_BUILTIN_GPIO #define TOSA_SCOOP_PXA_VCORE1 SCOOP_GPCR_PA11 -#define TOSA_SCOOP_TC6393_REST_IN SCOOP_GPCR_PA12 +#define TOSA_GPIO_TC6393XB_REST_IN (TOSA_SCOOP_GPIO_BASE + 1) #define TOSA_GPIO_IR_POWERDWN (TOSA_SCOOP_GPIO_BASE + 2) #define TOSA_GPIO_SD_WP (TOSA_SCOOP_GPIO_BASE + 3) #define TOSA_GPIO_PWR_ON (TOSA_SCOOP_GPIO_BASE + 4) @@ -35,11 +35,9 @@ #define TOSA_SCOOP_AC_IN_OL SCOOP_GPCR_PA19 /* GPIO Direction 1 : output mode / 0:input mode */ -#define TOSA_SCOOP_IO_DIR ( TOSA_SCOOP_PXA_VCORE1 | TOSA_SCOOP_TC6393_REST_IN | \ +#define TOSA_SCOOP_IO_DIR (TOSA_SCOOP_PXA_VCORE1 | \ TOSA_SCOOP_AUD_PWR_ON |\ - TOSA_SCOOP_BT_RESET | TOSA_SCOOP_BT_PWR_EN ) -/* GPIO out put level when init 1: Hi */ -#define TOSA_SCOOP_IO_OUT ( TOSA_SCOOP_TC6393_REST_IN ) + TOSA_SCOOP_BT_RESET | TOSA_SCOOP_BT_PWR_EN) /* * SCOOP2 jacket GPIOs @@ -49,16 +47,34 @@ #define TOSA_GPIO_NOTE_LED (TOSA_SCOOP_JC_GPIO_BASE + 1) #define TOSA_GPIO_CHRG_ERR_LED (TOSA_SCOOP_JC_GPIO_BASE + 2) #define TOSA_GPIO_USB_PULLUP (TOSA_SCOOP_JC_GPIO_BASE + 3) -#define TOSA_SCOOP_JC_TC6393_SUSPEND SCOOP_GPCR_PA15 -#define TOSA_SCOOP_JC_TC3693_L3V_ON SCOOP_GPCR_PA16 +#define TOSA_GPIO_TC6393XB_SUSPEND (TOSA_SCOOP_JC_GPIO_BASE + 4) +#define TOSA_GPIO_TC6393XB_L3V_ON (TOSA_SCOOP_JC_GPIO_BASE + 5) #define TOSA_SCOOP_JC_WLAN_DETECT SCOOP_GPCR_PA17 #define TOSA_GPIO_WLAN_LED (TOSA_SCOOP_JC_GPIO_BASE + 7) #define TOSA_SCOOP_JC_CARD_LIMIT_SEL SCOOP_GPCR_PA19 /* GPIO Direction 1 : output mode / 0:input mode */ -#define TOSA_SCOOP_JC_IO_DIR ( \ - TOSA_SCOOP_JC_TC6393_SUSPEND | TOSA_SCOOP_JC_TC3693_L3V_ON | \ - TOSA_SCOOP_JC_CARD_LIMIT_SEL ) +#define TOSA_SCOOP_JC_IO_DIR (TOSA_SCOOP_JC_CARD_LIMIT_SEL) + +/* + * TC6393XB GPIOs + */ +#define TOSA_TC6393XB_GPIO_BASE (NR_BUILTIN_GPIO + 2 * 12) +#define TOSA_TC6393XB_GPIO(i) (TOSA_TC6393XB_GPIO_BASE + (i)) +#define TOSA_TC6393XB_GPIO_BIT(gpio) (1 << (gpio - TOSA_TC6393XB_GPIO_BASE)) + +#define TOSA_GPIO_TG_ON (TOSA_TC6393XB_GPIO_BASE + 0) +#define TOSA_GPIO_L_MUTE (TOSA_TC6393XB_GPIO_BASE + 1) +#define TOSA_GPIO_BL_C20MA (TOSA_TC6393XB_GPIO_BASE + 3) +#define TOSA_GPIO_CARD_VCC_ON (TOSA_TC6393XB_GPIO_BASE + 4) +#define TOSA_GPIO_CHARGE_OFF (TOSA_TC6393XB_GPIO_BASE + 6) +#define TOSA_GPIO_CHARGE_OFF_JC (TOSA_TC6393XB_GPIO_BASE + 7) +#define TOSA_GPIO_BAT0_V_ON (TOSA_TC6393XB_GPIO_BASE + 9) +#define TOSA_GPIO_BAT1_V_ON (TOSA_TC6393XB_GPIO_BASE + 10) +#define TOSA_GPIO_BU_CHRG_ON (TOSA_TC6393XB_GPIO_BASE + 11) +#define TOSA_GPIO_BAT_SW_ON (TOSA_TC6393XB_GPIO_BASE + 12) +#define TOSA_GPIO_BAT0_TH_ON (TOSA_TC6393XB_GPIO_BASE + 14) +#define TOSA_GPIO_BAT1_TH_ON (TOSA_TC6393XB_GPIO_BASE + 15) /* * Timing Generator @@ -84,13 +100,13 @@ #define TOSA_GPIO_JACKET_DETECT (7) #define TOSA_GPIO_nSD_DETECT (9) #define TOSA_GPIO_nSD_INT (10) -#define TOSA_GPIO_TC6393_CLK (11) +#define TOSA_GPIO_TC6393XB_CLK (11) #define TOSA_GPIO_BAT1_CRG (12) #define TOSA_GPIO_CF_CD (13) #define TOSA_GPIO_BAT0_CRG (14) -#define TOSA_GPIO_TC6393_INT (15) +#define TOSA_GPIO_TC6393XB_INT (15) #define TOSA_GPIO_BAT0_LOW (17) -#define TOSA_GPIO_TC6393_RDY (18) +#define TOSA_GPIO_TC6393XB_RDY (18) #define TOSA_GPIO_ON_RESET (19) #define TOSA_GPIO_EAR_IN (20) #define TOSA_GPIO_CF_IRQ (21) /* CF slot0 Ready */ @@ -138,7 +154,7 @@ #define TOSA_IRQ_GPIO_BAT1_CRG IRQ_GPIO(TOSA_GPIO_BAT1_CRG) #define TOSA_IRQ_GPIO_CF_CD IRQ_GPIO(TOSA_GPIO_CF_CD) #define TOSA_IRQ_GPIO_BAT0_CRG IRQ_GPIO(TOSA_GPIO_BAT0_CRG) -#define TOSA_IRQ_GPIO_TC6393_INT IRQ_GPIO(TOSA_GPIO_TC6393_INT) +#define TOSA_IRQ_GPIO_TC6393XB_INT IRQ_GPIO(TOSA_GPIO_TC6393XB_INT) #define TOSA_IRQ_GPIO_BAT0_LOW IRQ_GPIO(TOSA_GPIO_BAT0_LOW) #define TOSA_IRQ_GPIO_EAR_IN IRQ_GPIO(TOSA_GPIO_EAR_IN) #define TOSA_IRQ_GPIO_CF_IRQ IRQ_GPIO(TOSA_GPIO_CF_IRQ) -- cgit v0.10.2 From 4440cbd69fc71bab8ed932e237b2a453b365ab9b Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Sat, 14 Jun 2008 11:42:57 +0100 Subject: [ARM] 5098/1: fix sound/soc/pxa/tosa.c to new gpio api The sound/soc/pxa/tosa.c contains dependencies on parts that never ever hit mainline. Replace them with current support for tc6393xb. Signed-off-by: Dmitry Baryshkov Acked-by: Mark Brown Signed-off-by: Russell King diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index 484f883..329b33f 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -48,6 +48,7 @@ config SND_PXA2XX_SOC_POODLE config SND_PXA2XX_SOC_TOSA tristate "SoC AC97 Audio support for Tosa" depends on SND_PXA2XX_SOC && MACH_TOSA + depends on MFD_TC6393XB select SND_PXA2XX_SOC_AC97 select SND_SOC_WM9712 help diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c index 7346d7e..c1462c4 100644 --- a/sound/soc/pxa/tosa.c +++ b/sound/soc/pxa/tosa.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include @@ -31,7 +32,7 @@ #include #include -#include +#include #include #include #include @@ -138,10 +139,7 @@ static int tosa_set_spk(struct snd_kcontrol *kcontrol, static int tosa_hp_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { - if (SND_SOC_DAPM_EVENT_ON(event)) - set_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_L_MUTE); - else - reset_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_L_MUTE); + gpio_set_value(TOSA_GPIO_L_MUTE, SND_SOC_DAPM_EVENT_ON(event) ? 1 :0); return 0; } @@ -261,16 +259,28 @@ static int __init tosa_init(void) if (!machine_is_tosa()) return -ENODEV; + ret = gpio_request(TOSA_GPIO_L_MUTE, "Headphone Jack"); + if (ret) + return ret; + gpio_direction_output(TOSA_GPIO_L_MUTE, 0); + tosa_snd_device = platform_device_alloc("soc-audio", -1); - if (!tosa_snd_device) - return -ENOMEM; + if (!tosa_snd_device) { + ret = -ENOMEM; + goto err_alloc; + } platform_set_drvdata(tosa_snd_device, &tosa_snd_devdata); tosa_snd_devdata.dev = &tosa_snd_device->dev; ret = platform_device_add(tosa_snd_device); - if (ret) - platform_device_put(tosa_snd_device); + if (!ret) + return 0; + + platform_device_put(tosa_snd_device); + +err_alloc: + gpio_free(TOSA_GPIO_L_MUTE); return ret; } @@ -278,6 +288,7 @@ static int __init tosa_init(void) static void __exit tosa_exit(void) { platform_device_unregister(tosa_snd_device); + gpio_free(TOSA_GPIO_L_MUTE); } module_init(tosa_init); -- cgit v0.10.2 From 53b14ea336ca45f34821ad78a1b45c2315283621 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Sat, 14 Jun 2008 11:43:36 +0100 Subject: [ARM] 5099/1: Tosa: support AC-in detection. Add support for ac-in via pda_power device. Signed-off-by: Dmitry Baryshkov Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 2fe0998..f3b12d2 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -410,6 +411,70 @@ static struct pxaficp_platform_data tosa_ficp_platform_data = { }; /* + * Tosa AC IN + */ +static int tosa_power_init(struct device *dev) +{ + int ret = gpio_request(TOSA_GPIO_AC_IN, "ac in"); + if (ret) + goto err_gpio_req; + + ret = gpio_direction_input(TOSA_GPIO_AC_IN); + if (ret) + goto err_gpio_in; + + return 0; + +err_gpio_in: + gpio_free(TOSA_GPIO_AC_IN); +err_gpio_req: + return ret; +} + +static void tosa_power_exit(struct device *dev) +{ + gpio_free(TOSA_GPIO_AC_IN); +} + +static int tosa_power_ac_online(void) +{ + return gpio_get_value(TOSA_GPIO_AC_IN) == 0; +} + +static char *tosa_ac_supplied_to[] = { + "main-battery", + "backup-battery", + "jacket-battery", +}; + +static struct pda_power_pdata tosa_power_data = { + .init = tosa_power_init, + .is_ac_online = tosa_power_ac_online, + .exit = tosa_power_exit, + .supplied_to = tosa_ac_supplied_to, + .num_supplicants = ARRAY_SIZE(tosa_ac_supplied_to), +}; + +static struct resource tosa_power_resource[] = { + { + .name = "ac", + .start = gpio_to_irq(TOSA_GPIO_AC_IN), + .end = gpio_to_irq(TOSA_GPIO_AC_IN), + .flags = IORESOURCE_IRQ | + IORESOURCE_IRQ_HIGHEDGE | + IORESOURCE_IRQ_LOWEDGE, + }, +}; + +static struct platform_device tosa_power_device = { + .name = "pda-power", + .id = -1, + .dev.platform_data = &tosa_power_data, + .resource = tosa_power_resource, + .num_resources = ARRAY_SIZE(tosa_power_resource), +}; + +/* * Tosa Keyboard */ static struct platform_device tosakbd_device = { @@ -633,6 +698,7 @@ static struct platform_device *devices[] __initdata = { &tosascoop_device, &tosascoop_jc_device, &tc6393xb_device, + &tosa_power_device, &tosakbd_device, &tosa_gpio_keys_device, &tosaled_device, -- cgit v0.10.2 From aa613de676986f136fa6f48a4d709b5d264f4f38 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Fri, 27 Jun 2008 10:37:19 +0100 Subject: [ARM] 5127/1: Core MFD support This patch provides a common subdevice registration system for MFD type chips, using platfrom device. Signed-off-by: Ian Molton Signed-off-by: Dmitry Baryshkov Signed-off-by: Russell King diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 1a1ac26..8ebc0be 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -5,6 +5,10 @@ menu "Multifunction device drivers" depends on HAS_IOMEM +config MFD_CORE + tristate + default n + config MFD_SM501 tristate "Support for Silicon Motion SM501" ---help--- diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index b416844..33daa2f 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -10,6 +10,8 @@ obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o +obj-$(CONFIG_MFD_CORE) += mfd-core.o + obj-$(CONFIG_MCP) += mcp-core.o obj-$(CONFIG_MCP_SA11X0) += mcp-sa11x0.o obj-$(CONFIG_MCP_UCB1200) += ucb1x00-core.o diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c new file mode 100644 index 0000000..d7d88ce --- /dev/null +++ b/drivers/mfd/mfd-core.c @@ -0,0 +1,114 @@ +/* + * drivers/mfd/mfd-core.c + * + * core MFD support + * Copyright (c) 2006 Ian Molton + * Copyright (c) 2007,2008 Dmitry Baryshkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include + +static int mfd_add_device(struct platform_device *parent, + const struct mfd_cell *cell, + struct resource *mem_base, + int irq_base) +{ + struct resource res[cell->num_resources]; + struct platform_device *pdev; + int ret = -ENOMEM; + int r; + + pdev = platform_device_alloc(cell->name, parent->id); + if (!pdev) + goto fail_alloc; + + pdev->dev.parent = &parent->dev; + + ret = platform_device_add_data(pdev, + cell, sizeof(struct mfd_cell)); + if (ret) + goto fail_device; + + memzero(res, sizeof(res)); + for (r = 0; r < cell->num_resources; r++) { + res[r].name = cell->resources[r].name; + res[r].flags = cell->resources[r].flags; + + /* Find out base to use */ + if (cell->resources[r].flags & IORESOURCE_MEM) { + res[r].parent = mem_base; + res[r].start = mem_base->start + + cell->resources[r].start; + res[r].end = mem_base->start + + cell->resources[r].end; + } else if (cell->resources[r].flags & IORESOURCE_IRQ) { + res[r].start = irq_base + + cell->resources[r].start; + res[r].end = irq_base + + cell->resources[r].end; + } else { + res[r].parent = cell->resources[r].parent; + res[r].start = cell->resources[r].start; + res[r].end = cell->resources[r].end; + } + } + + platform_device_add_resources(pdev, res, cell->num_resources); + + ret = platform_device_add(pdev); + if (ret) + goto fail_device; + + return 0; + +/* platform_device_del(pdev); */ +fail_device: + platform_device_put(pdev); +fail_alloc: + return ret; +} + +int mfd_add_devices( + struct platform_device *parent, + const struct mfd_cell *cells, int n_devs, + struct resource *mem_base, + int irq_base) +{ + int i; + int ret = 0; + + for (i = 0; i < n_devs; i++) { + ret = mfd_add_device(parent, cells + i, mem_base, irq_base); + if (ret) + break; + } + + if (ret) + mfd_remove_devices(parent); + + return ret; +} +EXPORT_SYMBOL(mfd_add_devices); + +static int mfd_remove_devices_fn(struct device *dev, void *unused) +{ + platform_device_unregister( + container_of(dev, struct platform_device, dev)); + return 0; +} + +void mfd_remove_devices(struct platform_device *parent) +{ + device_for_each_child(&parent->dev, NULL, mfd_remove_devices_fn); +} +EXPORT_SYMBOL(mfd_remove_devices); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ian Molton, Dmitry Baryshkov"); diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h new file mode 100644 index 0000000..bb3dd05 --- /dev/null +++ b/include/linux/mfd/core.h @@ -0,0 +1,55 @@ +#ifndef MFD_CORE_H +#define MFD_CORE_H +/* + * drivers/mfd/mfd-core.h + * + * core MFD support + * Copyright (c) 2006 Ian Molton + * Copyright (c) 2007 Dmitry Baryshkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include + +/* + * This struct describes the MFD part ("cell"). + * After registration the copy of this structure will become the platform data + * of the resulting platform_device + */ +struct mfd_cell { + const char *name; + + int (*enable)(struct platform_device *dev); + int (*disable)(struct platform_device *dev); + int (*suspend)(struct platform_device *dev); + int (*resume)(struct platform_device *dev); + + void *driver_data; /* driver-specific data */ + + /* + * This resources can be specified relatievly to the parent device. + * For accessing device you should use resources from device + */ + int num_resources; + const struct resource *resources; +}; + +static inline struct mfd_cell * +mfd_get_cell(struct platform_device *pdev) +{ + return (struct mfd_cell *)pdev->dev.platform_data; +} + +extern int mfd_add_devices( + struct platform_device *parent, + const struct mfd_cell *cells, int n_devs, + struct resource *mem_base, + int irq_base); + +extern void mfd_remove_devices(struct platform_device *parent); + +#endif -- cgit v0.10.2 From f024ff10b1ab13da4d626366019fd05c49721af7 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Fri, 27 Jun 2008 10:37:57 +0100 Subject: [ARM] 5128/1: tc6393xb: tmio-nand support Signed-off-by: Dmitry Baryshkov Signed-off-by: Russell King diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 8ebc0be..7dff105 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -45,6 +45,7 @@ config HTC_PASIC3 config MFD_TC6393XB bool "Support Toshiba TC6393XB" depends on HAVE_GPIO_LIB + select MFD_CORE help Support for Toshiba Mobile IO Controller TC6393XB diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c index 4d7192e..2d87501 100644 --- a/drivers/mfd/tc6393xb.c +++ b/drivers/mfd/tc6393xb.c @@ -21,6 +21,8 @@ #include #include #include +#include +#include #include #include @@ -108,6 +110,59 @@ struct tc6393xb { int irq_base; }; +enum { + TC6393XB_CELL_NAND, +}; + +/*--------------------------------------------------------------------------*/ + +static int tc6393xb_nand_enable(struct platform_device *nand) +{ + struct platform_device *dev = to_platform_device(nand->dev.parent); + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + unsigned long flags; + + spin_lock_irqsave(&tc6393xb->lock, flags); + + /* SMD buffer on */ + dev_dbg(&dev->dev, "SMD buffer on\n"); + iowrite8(0xff, tc6393xb->scr + SCR_GPI_BCR(1)); + + spin_unlock_irqrestore(&tc6393xb->lock, flags); + + return 0; +} + +static struct resource __devinitdata tc6393xb_nand_resources[] = { + { + .name = TMIO_NAND_CONFIG, + .start = 0x0100, + .end = 0x01ff, + .flags = IORESOURCE_MEM, + }, + { + .name = TMIO_NAND_CONTROL, + .start = 0x1000, + .end = 0x1007, + .flags = IORESOURCE_MEM, + }, + { + .name = TMIO_NAND_IRQ, + .start = IRQ_TC6393_NAND, + .end = IRQ_TC6393_NAND, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mfd_cell __devinitdata tc6393xb_cells[] = { + [TC6393XB_CELL_NAND] = { + .name = "tmio-nand", + .enable = tc6393xb_nand_enable, + .num_resources = ARRAY_SIZE(tc6393xb_nand_resources), + .resources = tc6393xb_nand_resources, + }, +}; + /*--------------------------------------------------------------------------*/ static int tc6393xb_gpio_get(struct gpio_chip *chip, @@ -410,6 +465,12 @@ static int __devinit tc6393xb_probe(struct platform_device *dev) if (tc6393xb->irq) tc6393xb_attach_irq(dev); + tc6393xb_cells[TC6393XB_CELL_NAND].driver_data = tcpd->nand_data; + + retval = mfd_add_devices(dev, + tc6393xb_cells, ARRAY_SIZE(tc6393xb_cells), + iomem, tcpd->irq_base); + return 0; if (tc6393xb->irq) @@ -440,6 +501,8 @@ static int __devexit tc6393xb_remove(struct platform_device *dev) struct tc6393xb *tc6393xb = platform_get_drvdata(dev); int ret; + mfd_remove_devices(dev); + if (tc6393xb->irq) tc6393xb_detach_irq(dev); diff --git a/include/linux/mfd/tc6393xb.h b/include/linux/mfd/tc6393xb.h index 0e3dd4c..7cc824a 100644 --- a/include/linux/mfd/tc6393xb.h +++ b/include/linux/mfd/tc6393xb.h @@ -31,6 +31,8 @@ struct tc6393xb_platform_data { int irq_base; /* a base for cascaded irq */ int gpio_base; + + struct tmio_nand_data *nand_data; }; /* diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h new file mode 100644 index 0000000..9438d8c --- /dev/null +++ b/include/linux/mfd/tmio.h @@ -0,0 +1,17 @@ +#ifndef MFD_TMIO_H +#define MFD_TMIO_H + +/* + * data for the NAND controller + */ +struct tmio_nand_data { + struct nand_bbt_descr *badblock_pattern; + struct mtd_partition *partition; + unsigned int num_partitions; +}; + +#define TMIO_NAND_CONFIG "tmio-nand-config" +#define TMIO_NAND_CONTROL "tmio-nand-control" +#define TMIO_NAND_IRQ "tmio-nand" + +#endif -- cgit v0.10.2 From 5289fecda021828af85fccc8cc2613a85d0fcf52 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Fri, 27 Jun 2008 10:38:44 +0100 Subject: [ARM] 5129/1: tosa: tmio-nand data Signed-off-by: Dmitry Baryshkov Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index f3b12d2..fa903e7 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -22,6 +22,9 @@ #include #include #include +#include +#include +#include #include #include #include @@ -666,6 +669,39 @@ static int tosa_tc6393xb_suspend(struct platform_device *dev) return 0; } +static struct mtd_partition tosa_nand_partition[] = { + { + .name = "smf", + .offset = 0, + .size = 7 * 1024 * 1024, + }, + { + .name = "root", + .offset = MTDPART_OFS_APPEND, + .size = 28 * 1024 * 1024, + }, + { + .name = "home", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; + +static struct nand_bbt_descr tosa_tc6393xb_nand_bbt = { + .options = 0, + .offs = 4, + .len = 2, + .pattern = scan_ff_pattern +}; + +static struct tmio_nand_data tosa_tc6393xb_nand_config = { + .num_partitions = ARRAY_SIZE(tosa_nand_partition), + .partition = tosa_nand_partition, + .badblock_pattern = &tosa_tc6393xb_nand_bbt, +}; + static struct tc6393xb_platform_data tosa_tc6393xb_setup = { .scr_pll2cr = 0x0cc1, .scr_gper = 0x3300, @@ -681,6 +717,8 @@ static struct tc6393xb_platform_data tosa_tc6393xb_setup = { .disable = tosa_tc6393xb_disable, .suspend = tosa_tc6393xb_suspend, .resume = tosa_tc6393xb_resume, + + .nand_data = &tosa_tc6393xb_nand_config, }; -- cgit v0.10.2 From 16b32fd0a35b30cbd67395cfcbd360354db44f39 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Sat, 5 Jul 2008 09:02:48 +0100 Subject: [ARM] 5150/1: Tosa: support built-in bluetooth power-up The driver is pretty much generic and will be later shared with a few other devices, like hx4700 ipaq. Signed-off-by: Dmitry Baryshkov Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 5da7a68..6c162f8 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -273,4 +273,12 @@ config PXA_SSP tristate help Enable support for PXA2xx SSP ports + +config TOSA_BT + tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" + depends on MACH_TOSA + select RFKILL + help + This is a simple driver that is able to control + the state of built in bluetooth chip on tosa. endif diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index c9e66fb..18e0b24 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -58,3 +58,5 @@ obj-$(CONFIG_LEDS) += $(led-y) ifeq ($(CONFIG_PCI),y) obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o endif + +obj-$(CONFIG_TOSA_BT) += tosa-bt.o diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c new file mode 100644 index 0000000..7d85054 --- /dev/null +++ b/arch/arm/mach-pxa/tosa-bt.c @@ -0,0 +1,150 @@ +/* + * Bluetooth built-in chip control + * + * Copyright (c) 2008 Dmitry Baryshkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include + +#include + +static void tosa_bt_on(struct tosa_bt_data *data) +{ + gpio_set_value(data->gpio_reset, 0); + gpio_set_value(data->gpio_pwr, 1); + gpio_set_value(data->gpio_reset, 1); + mdelay(20); + gpio_set_value(data->gpio_reset, 0); +} + +static void tosa_bt_off(struct tosa_bt_data *data) +{ + gpio_set_value(data->gpio_reset, 1); + mdelay(10); + gpio_set_value(data->gpio_pwr, 0); + gpio_set_value(data->gpio_reset, 0); +} + +static int tosa_bt_toggle_radio(void *data, enum rfkill_state state) +{ + pr_info("BT_RADIO going: %s\n", + state == RFKILL_STATE_ON ? "on" : "off"); + + if (state == RFKILL_STATE_ON) { + pr_info("TOSA_BT: going ON\n"); + tosa_bt_on(data); + } else { + pr_info("TOSA_BT: going OFF\n"); + tosa_bt_off(data); + } + return 0; +} + +static int tosa_bt_probe(struct platform_device *dev) +{ + int rc; + struct rfkill *rfk; + + struct tosa_bt_data *data = dev->dev.platform_data; + + rc = gpio_request(data->gpio_reset, "Bluetooth reset"); + if (rc) + goto err_reset; + rc = gpio_direction_output(data->gpio_reset, 0); + if (rc) + goto err_reset_dir; + rc = gpio_request(data->gpio_pwr, "Bluetooth power"); + if (rc) + goto err_pwr; + rc = gpio_direction_output(data->gpio_pwr, 0); + if (rc) + goto err_pwr_dir; + + rfk = rfkill_allocate(&dev->dev, RFKILL_TYPE_BLUETOOTH); + if (!rfk) { + rc = -ENOMEM; + goto err_rfk_alloc; + } + + rfk->name = "tosa-bt"; + rfk->toggle_radio = tosa_bt_toggle_radio; + rfk->data = data; +#ifdef CONFIG_RFKILL_LEDS + rfk->led_trigger.name = "tosa-bt"; +#endif + + rc = rfkill_register(rfk); + if (rc) + goto err_rfkill; + + platform_set_drvdata(dev, rfk); + + return 0; + +err_rfkill: + if (rfk) + rfkill_free(rfk); + rfk = NULL; +err_rfk_alloc: + tosa_bt_off(data); +err_pwr_dir: + gpio_free(data->gpio_pwr); +err_pwr: +err_reset_dir: + gpio_free(data->gpio_reset); +err_reset: + return rc; +} + +static int __devexit tosa_bt_remove(struct platform_device *dev) +{ + struct tosa_bt_data *data = dev->dev.platform_data; + struct rfkill *rfk = platform_get_drvdata(dev); + + platform_set_drvdata(dev, NULL); + + if (rfk) + rfkill_unregister(rfk); + rfk = NULL; + + tosa_bt_off(data); + + gpio_free(data->gpio_pwr); + gpio_free(data->gpio_reset); + + return 0; +} + +static struct platform_driver tosa_bt_driver = { + .probe = tosa_bt_probe, + .remove = __devexit_p(tosa_bt_remove), + + .driver = { + .name = "tosa-bt", + .owner = THIS_MODULE, + }, +}; + + +static int __init tosa_bt_init(void) +{ + return platform_driver_register(&tosa_bt_driver); +} + +static void __exit tosa_bt_exit(void) +{ + platform_driver_unregister(&tosa_bt_driver); +} + +module_init(tosa_bt_init); +module_exit(tosa_bt_exit); diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index fa903e7..5a9d329 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include @@ -40,6 +41,7 @@ #include #include #include +#include #include #include @@ -562,7 +564,7 @@ static struct gpio_led tosa_gpio_leds[] = { }, { .name = "tosa:blue:bluetooth", - .default_trigger = "none", + .default_trigger = "tosa-bt", .gpio = TOSA_GPIO_BT_LED, }, }; @@ -732,6 +734,18 @@ static struct platform_device tc6393xb_device = { .resource = tc6393xb_resources, }; +static struct tosa_bt_data tosa_bt_data = { + .gpio_pwr = TOSA_GPIO_BT_PWR_EN, + .gpio_reset = TOSA_GPIO_BT_RESET, +}; + +static struct platform_device tosa_bt_device = { + .name = "tosa-bt", + .id = -1, + .dev.platform_data = &tosa_bt_data, +}; + + static struct platform_device *devices[] __initdata = { &tosascoop_device, &tosascoop_jc_device, @@ -740,6 +754,7 @@ static struct platform_device *devices[] __initdata = { &tosakbd_device, &tosa_gpio_keys_device, &tosaled_device, + &tosa_bt_device, }; static void tosa_poweroff(void) diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h index a16c103..a72803f 100644 --- a/include/asm-arm/arch-pxa/tosa.h +++ b/include/asm-arm/arch-pxa/tosa.h @@ -30,14 +30,13 @@ #define TOSA_GPIO_SD_WP (TOSA_SCOOP_GPIO_BASE + 3) #define TOSA_GPIO_PWR_ON (TOSA_SCOOP_GPIO_BASE + 4) #define TOSA_SCOOP_AUD_PWR_ON SCOOP_GPCR_PA16 -#define TOSA_SCOOP_BT_RESET SCOOP_GPCR_PA17 -#define TOSA_SCOOP_BT_PWR_EN SCOOP_GPCR_PA18 +#define TOSA_GPIO_BT_RESET (TOSA_SCOOP_GPIO_BASE + 6) +#define TOSA_GPIO_BT_PWR_EN (TOSA_SCOOP_GPIO_BASE + 7) #define TOSA_SCOOP_AC_IN_OL SCOOP_GPCR_PA19 /* GPIO Direction 1 : output mode / 0:input mode */ #define TOSA_SCOOP_IO_DIR (TOSA_SCOOP_PXA_VCORE1 | \ - TOSA_SCOOP_AUD_PWR_ON |\ - TOSA_SCOOP_BT_RESET | TOSA_SCOOP_BT_PWR_EN) + TOSA_SCOOP_AUD_PWR_ON) /* * SCOOP2 jacket GPIOs diff --git a/include/asm-arm/arch-pxa/tosa_bt.h b/include/asm-arm/arch-pxa/tosa_bt.h new file mode 100644 index 0000000..efc3c3d --- /dev/null +++ b/include/asm-arm/arch-pxa/tosa_bt.h @@ -0,0 +1,22 @@ +/* + * Tosa bluetooth built-in chip control. + * + * Later it may be shared with some other platforms. + * + * Copyright (c) 2008 Dmitry Baryshkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef TOSA_BT_H +#define TOSA_BT_H + +struct tosa_bt_data { + int gpio_pwr; + int gpio_reset; +}; + +#endif + -- cgit v0.10.2 From 0121702dbaf961b4c996f2579d4286a0a1ed877c Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Mon, 7 Jul 2008 10:09:29 +0100 Subject: [ARM] 5151/1: Tosa: remove double inclusion of linux/delay.h The patch applies to the linux-next tree. Signed-off-by: Alexander Beregalov Acked-by: Dmitry Baryshkov Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 5a9d329..2d49de5 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include -- cgit v0.10.2 From 938870491f0cad030b358af47e28d124b72702d1 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Mon, 7 Jul 2008 10:50:06 +0100 Subject: [ARM] 5152/1: Add myself to tosa maintainers list Since the beginning of this year I'm providing fixes and updates for the Sharp SL-6000 (tosa). Add myself as one of the maintainers of the machine. Cc: Dirk Opfer Signed-off-by: Dmitry Baryshkov Acked-by: Eric Miao Signed-off-by: Russell King diff --git a/MAINTAINERS b/MAINTAINERS index c68a118..616b97d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -567,6 +567,8 @@ L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained ARM/TOSA MACHINE SUPPORT +P: Dmitry Baryshkov +M: dbaryshkov@gmail.com P: Dirk Opfer M: dirk@opfer-online.de S: Maintained -- cgit v0.10.2 From e172274ccc55d20536fbdceb6131f38e288541e0 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 13 Jun 2008 09:17:31 +0100 Subject: [ARM] 5088/3: pxa2xx: add pxa2xx_set_spi_info to register pxa2xx-spi platform devices Add a function to dynamically allocate and register pxa2xx-spi platform devices, to be used by PXA2xx and PXA3xx based systems. Switch pcm027 and lubbock to use it. Signed-off-by: Guennadi Liakhovetski Acked-by: Eric Miao Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 914bb33..ef7271e 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -139,6 +139,7 @@ config MACH_PCM027 bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" select PXA27x select IWMMXT + select PXA_SSP endmenu diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index a6f2390..abc161d 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include @@ -831,3 +832,20 @@ void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info) } #endif /* CONFIG_PXA3xx */ + +/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1. + * See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */ +void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info) +{ + struct platform_device *pd; + + pd = platform_device_alloc("pxa2xx-spi", id); + if (pd == NULL) { + printk(KERN_ERR "pxa2xx-spi: failed to allocate device id %d\n", + id); + return; + } + + pd->dev.platform_data = info; + platform_device_add(pd); +} diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index a3fae41..e041cce 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -226,14 +226,6 @@ static struct pxa2xx_spi_master pxa_ssp_master_info = { .num_chipselect = 0, }; -static struct platform_device pxa_ssp = { - .name = "pxa2xx-spi", - .id = 1, - .dev = { - .platform_data = &pxa_ssp_master_info, - }, -}; - static int lubbock_ads7846_pendown_state(void) { /* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */ @@ -367,7 +359,6 @@ static struct platform_device *devices[] __initdata = { &smc91x_device, &lubbock_flash_device[0], &lubbock_flash_device[1], - &pxa_ssp, }; static struct pxafb_mode_info sharp_lm8v31_mode = { @@ -501,6 +492,7 @@ static void __init lubbock_init(void) lubbock_flash_data[flashboot].name = "boot-rom"; (void) platform_add_devices(devices, ARRAY_SIZE(devices)); + pxa2xx_set_spi_info(1, &pxa_ssp_master_info); spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); } diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c index 3b945eb..377f3be 100644 --- a/arch/arm/mach-pxa/pcm027.c +++ b/arch/arm/mach-pxa/pcm027.c @@ -24,7 +24,9 @@ #include #include #include +#include #include + #include #include #include @@ -108,6 +110,32 @@ static struct platform_device smc91x_device = { .resource = smc91x_resources, }; +/* + * SPI host and devices + */ +static struct pxa2xx_spi_master pxa_ssp_master_info = { + .num_chipselect = 1, +}; + +static struct max7301_platform_data max7301_info = { + .base = -1, +}; + +/* bus_num must match id in pxa2xx_set_spi_info() call */ +static struct spi_board_info spi_board_info[] __initdata = { + { + .modalias = "max7301", + .platform_data = &max7301_info, + .max_speed_hz = 13000000, + .bus_num = 1, + .chip_select = 0, + .mode = SPI_MODE_0, + }, +}; + +/* + * NOR flash + */ static struct physmap_flash_data pcm027_flash_data = { .width = 4, }; @@ -190,6 +218,9 @@ static void __init pcm027_init(void) #ifdef CONFIG_MACH_PCM990_BASEBOARD pcm990_baseboard_init(); #endif + + pxa2xx_set_spi_info(1, &pxa_ssp_master_info); + spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); } static void __init pcm027_map_io(void) diff --git a/include/asm-arm/arch-pxa/pxa2xx_spi.h b/include/asm-arm/arch-pxa/pxa2xx_spi.h index 3459fb2..2206cb6 100644 --- a/include/asm-arm/arch-pxa/pxa2xx_spi.h +++ b/include/asm-arm/arch-pxa/pxa2xx_spi.h @@ -41,4 +41,6 @@ struct pxa2xx_spi_chip { void (*cs_control)(u32 command); }; +extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info); + #endif /*PXA2XX_SPI_H_*/ -- cgit v0.10.2 From c7b4f5ba07a16d2c84ac6cc312488cc6cc0db518 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Tue, 1 Jul 2008 15:45:10 +0100 Subject: [ARM] 5142/1: pxa: move move zaurus declarations to proper place Signed-off-by: Dmitry Baryshkov Acked-by: Eric Miao Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index ef7271e..01d23e5 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -58,6 +58,57 @@ config PXA_SHARPSL SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) handheld computer. +config MACH_POODLE + bool "Enable Sharp SL-5600 (Poodle) Support" + depends on PXA_SHARPSL + select PXA25x + select SHARP_LOCOMO + select PXA_SSP + +config MACH_CORGI + bool "Enable Sharp SL-C700 (Corgi) Support" + depends on PXA_SHARPSL + select PXA25x + select PXA_SHARP_C7xx + +config MACH_SHEPHERD + bool "Enable Sharp SL-C750 (Shepherd) Support" + depends on PXA_SHARPSL + select PXA25x + select PXA_SHARP_C7xx + +config MACH_HUSKY + bool "Enable Sharp SL-C760 (Husky) Support" + depends on PXA_SHARPSL + select PXA25x + select PXA_SHARP_C7xx + +config MACH_AKITA + bool "Enable Sharp SL-1000 (Akita) Support" + depends on PXA_SHARPSL + select PXA27x + select PXA_SHARP_Cxx00 + select MACH_SPITZ + select I2C + select I2C_PXA + +config MACH_SPITZ + bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" + depends on PXA_SHARPSL + select PXA27x + select PXA_SHARP_Cxx00 + +config MACH_BORZOI + bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support" + depends on PXA_SHARPSL + select PXA27x + select PXA_SHARP_Cxx00 + +config MACH_TOSA + bool "Enable Sharp SL-6000x (Tosa) Support" + depends on PXA_SHARPSL + select PXA25x + config ARCH_PXA_ESERIES bool "PXA based Toshiba e-series PDAs" select PXA25x @@ -199,57 +250,6 @@ endif endmenu -config MACH_POODLE - bool "Enable Sharp SL-5600 (Poodle) Support" - depends on PXA_SHARPSL - select PXA25x - select SHARP_LOCOMO - select PXA_SSP - -config MACH_CORGI - bool "Enable Sharp SL-C700 (Corgi) Support" - depends on PXA_SHARPSL - select PXA25x - select PXA_SHARP_C7xx - -config MACH_SHEPHERD - bool "Enable Sharp SL-C750 (Shepherd) Support" - depends on PXA_SHARPSL - select PXA25x - select PXA_SHARP_C7xx - -config MACH_HUSKY - bool "Enable Sharp SL-C760 (Husky) Support" - depends on PXA_SHARPSL - select PXA25x - select PXA_SHARP_C7xx - -config MACH_AKITA - bool "Enable Sharp SL-1000 (Akita) Support" - depends on PXA_SHARPSL - select PXA27x - select PXA_SHARP_Cxx00 - select MACH_SPITZ - select I2C - select I2C_PXA - -config MACH_SPITZ - bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" - depends on PXA_SHARPSL - select PXA27x - select PXA_SHARP_Cxx00 - -config MACH_BORZOI - bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support" - depends on PXA_SHARPSL - select PXA27x - select PXA_SHARP_Cxx00 - -config MACH_TOSA - bool "Enable Sharp SL-6000x (Tosa) Support" - depends on PXA_SHARPSL - select PXA25x - config PXA25x bool help -- cgit v0.10.2 From c0b8556f2f8146bd38324b14b1ce00f249ba8ed9 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Wed, 2 Jul 2008 13:50:09 +0100 Subject: [ARM] 5143/1: pxa: further cleanup PXA Kconfig by removing one unnecessary menu level Signed-off-by: Dmitry Baryshkov Acked-by: Eric Miao Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 01d23e5..faa2c3f 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -20,14 +20,17 @@ endmenu endif -menu "Select target boards" - config ARCH_GUMSTIX bool "Gumstix XScale boards" help Say Y here if you intend to run this kernel on a Gumstix Full Function Minature Computer. +config MACH_GUMSTIX_F + bool "Basix, Connex, ws-200ax, ws-400ax systems" + depends on ARCH_GUMSTIX + select PXA25x + config ARCH_LUBBOCK bool "Intel DBPXA250 Development Platform" select PXA25x @@ -157,6 +160,10 @@ config MACH_TRIZEPS4 bool "Keith und Koep Trizeps4 DIMM-Module" select PXA27x +config MACH_TRIZEPS4_CONXS + bool "ConXS Eval Board" + depends on MACH_TRIZEPS4 + config MACH_EM_X270 bool "CompuLab EM-x270 platform" select PXA27x @@ -192,17 +199,10 @@ config MACH_PCM027 select IWMMXT select PXA_SSP -endmenu - -choice - prompt "Used baseboard" - depends on MACH_PCM027 - config MACH_PCM990_BASEBOARD bool "PHYTEC PCM-990 development board" select HAVE_PWM - -endchoice + depends on MACH_PCM027 choice prompt "display on pcm990" @@ -219,34 +219,6 @@ config PCM990_DISPLAY_NONE endchoice -if ARCH_GUMSTIX - -choice - prompt "Select target Gumstix board" - -config MACH_GUMSTIX_F - bool "Basix, Connex, ws-200ax, ws-400ax systems" - select PXA25x - -endchoice - -endif - - -if MACH_TRIZEPS4 - -choice - prompt "Select base board for Trizeps 4 module" - -config MACH_TRIZEPS4_CONXS - bool "ConXS Eval Board" - -config MACH_TRIZEPS4_ANY - bool "another Board" - -endchoice - -endif endmenu -- cgit v0.10.2 From 6a566fbbcc902df6c9c4dc151bf399018083fb10 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 16 Jun 2008 08:16:46 +0100 Subject: [ARM] 5095/2: pcm990: switch from pxa_gpio_mode to pxa2xx_mfp_config pxa_gpio_mode() is deprecated, use the new pxa2xx_mfp_config() function to configure GPIOs in pcm990 platform code. Convert "array, ARRAY_SIZE(array)" to "ARRAY_AND_SIZE(array)" while at it. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 5d87c7c..30023b0 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -33,14 +33,30 @@ #include #include #include -#include #include #include #include #include #include +#include #include "devices.h" +#include "generic.h" + +static unsigned long pcm990_pin_config[] __initdata = { + /* MMC */ + GPIO32_MMC_CLK, + GPIO112_MMC_CMD, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + /* USB */ + GPIO88_USBH1_PWR, + GPIO89_USBH1_PEN, + /* PWM0 */ + GPIO16_PWM0_OUT, +}; /* * pcm990_lcd_power - control power supply to the LCD @@ -277,16 +293,6 @@ static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int, { int err; - /* - * enable GPIO for PXA27x MMC controller - */ - pxa_gpio_mode(GPIO32_MMCCLK_MD); - pxa_gpio_mode(GPIO112_MMCCMD_MD); - pxa_gpio_mode(GPIO92_MMCDAT0_MD); - pxa_gpio_mode(GPIO109_MMCDAT1_MD); - pxa_gpio_mode(GPIO110_MMCDAT2_MD); - pxa_gpio_mode(GPIO111_MMCDAT3_MD); - err = request_irq(PCM027_MMCDET_IRQ, mci_detect_int, IRQF_DISABLED, "MMC card detect", data); if (err) @@ -333,8 +339,6 @@ static struct pxamci_platform_data pcm990_mci_platform_data = { */ static int pcm990_ohci_init(struct device *dev) { - pxa_gpio_mode(PCM990_USB_OVERCURRENT); - pxa_gpio_mode(PCM990_USB_PWR_EN); /* * disable USB port 2 and 3 * power sense is active low @@ -361,23 +365,27 @@ static struct pxaohci_platform_data pcm990_ohci_platform_data = { * PXA27x Camera specific stuff */ #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE) +static unsigned long pcm990_camera_pin_config[] = { + /* CIF */ + GPIO98_CIF_DD_0, + GPIO105_CIF_DD_1, + GPIO104_CIF_DD_2, + GPIO103_CIF_DD_3, + GPIO95_CIF_DD_4, + GPIO94_CIF_DD_5, + GPIO93_CIF_DD_6, + GPIO108_CIF_DD_7, + GPIO107_CIF_DD_8, + GPIO106_CIF_DD_9, + GPIO42_CIF_MCLK, + GPIO45_CIF_PCLK, + GPIO43_CIF_FV, + GPIO44_CIF_LV, +}; + static int pcm990_pxacamera_init(struct device *dev) { - pxa_gpio_mode(GPIO98_CIF_DD_0_MD); - pxa_gpio_mode(GPIO105_CIF_DD_1_MD); - pxa_gpio_mode(GPIO104_CIF_DD_2_MD); - pxa_gpio_mode(GPIO103_CIF_DD_3_MD); - pxa_gpio_mode(GPIO95_CIF_DD_4_MD); - pxa_gpio_mode(GPIO94_CIF_DD_5_MD); - pxa_gpio_mode(GPIO93_CIF_DD_6_MD); - pxa_gpio_mode(GPIO108_CIF_DD_7_MD); - pxa_gpio_mode(GPIO107_CIF_DD_8_MD); - pxa_gpio_mode(GPIO106_CIF_DD_9_MD); - pxa_gpio_mode(GPIO42_CIF_MCLK_MD); - pxa_gpio_mode(GPIO45_CIF_PCLK_MD); - pxa_gpio_mode(GPIO43_CIF_FV_MD); - pxa_gpio_mode(GPIO44_CIF_LV_MD); - + pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config)); return 0; } @@ -449,8 +457,10 @@ static struct map_desc pcm990_io_desc[] __initdata = { */ void __init pcm990_baseboard_init(void) { + pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_pin_config)); + /* register CPLD access */ - iotable_init(pcm990_io_desc, ARRAY_SIZE(pcm990_io_desc)); + iotable_init(ARRAY_AND_SIZE(pcm990_io_desc)); /* register CPLD's IRQ controller */ pcm990_init_irq(); @@ -458,7 +468,6 @@ void __init pcm990_baseboard_init(void) #ifndef CONFIG_PCM990_DISPLAY_NONE set_pxa_fb_info(&pcm990_fbinfo); #endif - pxa_gpio_mode(GPIO16_PWM0_MD); platform_device_register(&pcm990_backlight_device); /* MMC */ @@ -473,9 +482,8 @@ void __init pcm990_baseboard_init(void) #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE) pxa_set_camera_info(&pcm990_pxacamera_platform_data); - i2c_register_board_info(0, pcm990_i2c_devices, - ARRAY_SIZE(pcm990_i2c_devices)); + i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices)); #endif - printk(KERN_INFO"PCM-990 Evaluation baseboard initialized\n"); + printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n"); } -- cgit v0.10.2 From ff279202781c473545862918a8ef1f4ef7712e47 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Thu, 22 May 2008 10:14:21 +0100 Subject: [ARM] 5042/1: magician: request GPIOs for pda_power Signed-off-by: Philipp Zabel Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 01b2fa7..595e8c4 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -511,6 +511,37 @@ static struct platform_device pasic3 = { * External power */ +static int power_supply_init(struct device *dev) +{ + int ret; + + ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC"); + if (ret) + goto err_cs_ac; + ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_USB, "CABLE_STATE_USB"); + if (ret) + goto err_cs_usb; + ret = gpio_request(EGPIO_MAGICIAN_CHARGE_EN, "CHARGE_EN"); + if (ret) + goto err_chg_en; + ret = gpio_request(GPIO30_MAGICIAN_nCHARGE_EN, "nCHARGE_EN"); + if (!ret) + ret = gpio_direction_output(GPIO30_MAGICIAN_nCHARGE_EN, 0); + if (ret) + goto err_nchg_en; + + return 0; + +err_nchg_en: + gpio_free(EGPIO_MAGICIAN_CHARGE_EN); +err_chg_en: + gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB); +err_cs_usb: + gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC); +err_cs_ac: + return ret; +} + static int magician_is_ac_online(void) { return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC); @@ -527,14 +558,24 @@ static void magician_set_charge(int flags) gpio_set_value(EGPIO_MAGICIAN_CHARGE_EN, flags); } +static void power_supply_exit(struct device *dev) +{ + gpio_free(GPIO30_MAGICIAN_nCHARGE_EN); + gpio_free(EGPIO_MAGICIAN_CHARGE_EN); + gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB); + gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC); +} + static char *magician_supplicants[] = { "ds2760-battery.0", "backup-battery" }; static struct pda_power_pdata power_supply_info = { + .init = power_supply_init, .is_ac_online = magician_is_ac_online, .is_usb_online = magician_is_usb_online, .set_charge = magician_set_charge, + .exit = power_supply_exit, .supplied_to = magician_supplicants, .num_supplicants = ARRAY_SIZE(magician_supplicants), }; -- cgit v0.10.2 From e181191acdfde5b1f9690c74a2459dd0a3331c62 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Sun, 22 Jun 2008 13:00:55 +0100 Subject: [ARM] 5119/1: magician: include linux/gpio.h instead of asm/gpio.h Signed-off-by: Philipp Zabel Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 595e8c4..6de2c13 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -27,7 +28,6 @@ #include #include -#include #include #include #include -- cgit v0.10.2 From 7a97010eb4f47c9d2d66bfb838a8638a8d02d9ef Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Thu, 26 Jun 2008 21:03:54 +0100 Subject: [ARM] 5125/1: magician: move gpio pin configuration into __initdata section The pin configuration array is only used during board init. Signed-off-by: Philipp Zabel Acked-by: Eric Miao Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 6de2c13..2dc14c3 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -44,7 +44,7 @@ #include "devices.h" #include "generic.h" -static unsigned long magician_pin_config[] = { +static unsigned long magician_pin_config[] __initdata = { /* SDRAM and Static Memory I/O Signals */ GPIO20_nSDCS_2, -- cgit v0.10.2 From e277479aba3d35745c822540e9c3d941aabb4e98 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Thu, 26 Jun 2008 21:04:31 +0100 Subject: [ARM] 5126/1: magician: remove superfluous mtd includes These were only needed for hardcoded flash partition tables, which were never submitted. It is better to have the bootloader pass the partition table to the kernel instead. Signed-off-by: Philipp Zabel Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 2dc14c3..9f249dc 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -22,8 +22,6 @@ #include #include #include -#include -#include #include #include #include -- cgit v0.10.2 From d0f7f1dff01698d228dc108895fbb9b13af37dab Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Mon, 30 Jun 2008 18:11:35 +0100 Subject: [ARM] 5137/1: magician: MACH_MAGICIAN doesn't need to depend on ARCH_PXA It is only defined inside an "if ARCH_PXA ... endif" block, so the depends on is not needed. Signed-off-by: Philipp Zabel ? Acked-by: Eric Miao Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index faa2c3f..61a131f 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -189,7 +189,6 @@ config MACH_ARMCORE config MACH_MAGICIAN bool "Enable HTC Magician Support" - depends on ARCH_PXA select PXA27x select IWMMXT -- cgit v0.10.2 From 14d1012db8462bbb7139ac4622f92e541d3019d1 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Mon, 30 Jun 2008 18:11:55 +0100 Subject: [ARM] 5138/1: magician: set pwm-backlight .id = -1 There will always be only one pwm-backlight on this device. Signed-off-by: Philipp Zabel Acked-by: Eric Miao Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 9f249dc..bad5821 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -397,6 +397,7 @@ static struct platform_pwm_backlight_data backlight_data = { static struct platform_device backlight = { .name = "pwm-backlight", + .id = -1, .dev = { .parent = &pxa27x_device_pwm0.dev, .platform_data = &backlight_data, -- cgit v0.10.2 From 3c85bce6f820258b49bb74c53d2f47c058199f1b Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Mon, 16 Jun 2008 08:16:46 +0100 Subject: [ARM] 5101/2: EM-X270 updates Convert EM-X270 pin configuration to use MFP tables and gpio library Make device initialization dependent on respective driver CONFIG_ value (like in zylonite) Add keypad and gpio_key devices Signed-off-by: Mike Rapoport Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index e23865a..e5cc6ca 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -1,7 +1,7 @@ /* - * Support for CompuLab EM-x270 platform + * Support for CompuLab EM-X270 platform * - * Copyright (C) 2007 CompuLab, Ltd. + * Copyright (C) 2007, 2008 CompuLab, Ltd. * Author: Mike Rapoport * * This program is free software; you can redistribute it and/or modify @@ -14,31 +14,159 @@ #include #include - #include #include +#include +#include +#include #include - #include +#include #include -#include #include #include #include #include #include -#include +#include #include "generic.h" /* GPIO IRQ usage */ -#define EM_X270_MMC_PD (105) -#define EM_X270_ETHIRQ IRQ_GPIO(41) -#define EM_X270_MMC_IRQ IRQ_GPIO(13) +#define GPIO41_ETHIRQ (41) +#define GPIO13_MMC_CD (13) +#define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ) +#define EM_X270_MMC_CD IRQ_GPIO(GPIO13_MMC_CD) + +/* NAND control GPIOs */ +#define GPIO11_NAND_CS (11) +#define GPIO56_NAND_RB (56) + +static unsigned long em_x270_pin_config[] = { + /* AC'97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + GPIO98_AC97_SYSCLK, + GPIO113_AC97_nRESET, + + /* BTUART */ + GPIO42_BTUART_RXD, + GPIO43_BTUART_TXD, + GPIO44_BTUART_CTS, + GPIO45_BTUART_RTS, + + /* STUART */ + GPIO46_STUART_RXD, + GPIO47_STUART_TXD, + + /* MCI controller */ + GPIO32_MMC_CLK, + GPIO112_MMC_CMD, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + + /* LCD */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, + + /* QCI */ + GPIO84_CIF_FV, + GPIO25_CIF_LV, + GPIO53_CIF_MCLK, + GPIO54_CIF_PCLK, + GPIO81_CIF_DD_0, + GPIO55_CIF_DD_1, + GPIO51_CIF_DD_2, + GPIO50_CIF_DD_3, + GPIO52_CIF_DD_4, + GPIO48_CIF_DD_5, + GPIO17_CIF_DD_6, + GPIO12_CIF_DD_7, + + /* I2C */ + GPIO117_I2C_SCL, + GPIO118_I2C_SDA, + + /* Keypad */ + GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, + GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, + GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, + GPIO34_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, + GPIO39_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH, + GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH, + GPIO91_KP_MKIN_6 | WAKEUP_ON_LEVEL_HIGH, + GPIO36_KP_MKIN_7 | WAKEUP_ON_LEVEL_HIGH, + GPIO103_KP_MKOUT_0, + GPIO104_KP_MKOUT_1, + GPIO105_KP_MKOUT_2, + GPIO106_KP_MKOUT_3, + GPIO107_KP_MKOUT_4, + GPIO108_KP_MKOUT_5, + GPIO96_KP_MKOUT_6, + GPIO22_KP_MKOUT_7, + + /* SSP1 */ + GPIO26_SSP1_RXD, + GPIO23_SSP1_SCLK, + GPIO24_SSP1_SFRM, + GPIO57_SSP1_TXD, + + /* SSP2 */ + GPIO19_SSP2_SCLK, + GPIO14_SSP2_SFRM, + GPIO89_SSP2_TXD, + GPIO88_SSP2_RXD, + + /* SDRAM and local bus */ + GPIO15_nCS_1, + GPIO78_nCS_2, + GPIO79_nCS_3, + GPIO80_nCS_4, + GPIO49_nPWE, + GPIO18_RDY, + + /* GPIO */ + GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, + + /* power controls */ + GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* GPRS_PWEN */ + GPIO115_GPIO | MFP_LPM_DRIVE_LOW, /* WLAN_PWEN */ + + /* NAND controls */ + GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */ + GPIO56_GPIO, /* NAND Ready/Busy */ + + /* interrupts */ + GPIO13_GPIO, /* MMC card detect */ + GPIO41_GPIO, /* DM9000 interrupt */ +}; -static struct resource em_x270_dm9k_resource[] = { +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +static struct resource em_x270_dm9000_resource[] = { [0] = { .start = PXA_CS2_PHYS, .end = PXA_CS2_PHYS + 3, @@ -52,36 +180,34 @@ static struct resource em_x270_dm9k_resource[] = { [2] = { .start = EM_X270_ETHIRQ, .end = EM_X270_ETHIRQ, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; -/* for the moment we limit ourselves to 32bit IO until some - * better IO routines can be written and tested - */ -static struct dm9000_plat_data em_x270_dm9k_platdata = { +static struct dm9000_plat_data em_x270_dm9000_platdata = { .flags = DM9000_PLATF_32BITONLY, }; -/* Ethernet device */ -static struct platform_device em_x270_dm9k = { +static struct platform_device em_x270_dm9000 = { .name = "dm9000", .id = 0, - .num_resources = ARRAY_SIZE(em_x270_dm9k_resource), - .resource = em_x270_dm9k_resource, + .num_resources = ARRAY_SIZE(em_x270_dm9000_resource), + .resource = em_x270_dm9000_resource, .dev = { - .platform_data = &em_x270_dm9k_platdata, + .platform_data = &em_x270_dm9000_platdata, } }; -/* WM9712 touchscreen controller. Hopefully the driver will make it to - * the mainstream sometime */ -static struct platform_device em_x270_ts = { - .name = "wm97xx-ts", - .id = -1, -}; +static void __init em_x270_init_dm9000(void) +{ + platform_device_register(&em_x270_dm9000); +} +#else +static inline void em_x270_init_dm9000(void) {} +#endif -/* RTC */ +/* V3020 RTC */ +#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE) static struct resource em_x270_v3020_resource[] = { [0] = { .start = PXA_CS4_PHYS, @@ -104,20 +230,26 @@ static struct platform_device em_x270_rtc = { } }; -/* NAND flash */ -#define GPIO_NAND_CS (11) -#define GPIO_NAND_RB (56) +static void __init em_x270_init_rtc(void) +{ + platform_device_register(&em_x270_rtc); +} +#else +static inline void em_x270_init_rtc(void) {} +#endif +/* NAND flash */ +#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) static inline void nand_cs_on(void) { - GPCR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS); + gpio_set_value(GPIO11_NAND_CS, 0); } static void nand_cs_off(void) { dsb(); - GPSR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS); + gpio_set_value(GPIO11_NAND_CS, 1); } /* hardware specific access to control-lines */ @@ -157,7 +289,7 @@ static int em_x270_nand_device_ready(struct mtd_info *mtd) { dsb(); - return GPLR(GPIO_NAND_RB) & GPIO_bit(GPIO_NAND_RB); + return gpio_get_value(GPIO56_NAND_RB); } static struct mtd_partition em_x270_partition_info[] = { @@ -210,16 +342,35 @@ static struct platform_device em_x270_nand = { } }; -/* platform devices */ -static struct platform_device *platform_devices[] __initdata = { - &em_x270_dm9k, - &em_x270_ts, - &em_x270_rtc, - &em_x270_nand, -}; +static void __init em_x270_init_nand(void) +{ + int err; + err = gpio_request(GPIO11_NAND_CS, "NAND CS"); + if (err) { + pr_warning("EM-X270: failed to request NAND CS gpio\n"); + return; + } + + gpio_direction_output(GPIO11_NAND_CS, 1); + + err = gpio_request(GPIO56_NAND_RB, "NAND R/B"); + if (err) { + pr_warning("EM-X270: failed to request NAND R/B gpio\n"); + gpio_free(GPIO11_NAND_CS); + return; + } + + gpio_direction_input(GPIO56_NAND_RB); + + platform_device_register(&em_x270_nand); +} +#else +static inline void em_x270_init_nand(void) {} +#endif /* PXA27x OHCI controller setup */ +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) static int em_x270_ohci_init(struct device *dev) { /* Set the Power Control Polarity Low */ @@ -237,27 +388,23 @@ static struct pxaohci_platform_data em_x270_ohci_platform_data = { .init = em_x270_ohci_init, }; +static void __init em_x270_init_ohci(void) +{ + pxa_set_ohci_info(&em_x270_ohci_platform_data); +} +#else +static inline void em_x270_init_ohci(void) {} +#endif +/* MCI controller setup */ +#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE) static int em_x270_mci_init(struct device *dev, irq_handler_t em_x270_detect_int, void *data) { - int err; - - /* setup GPIO for PXA27x MMC controller */ - pxa_gpio_mode(GPIO32_MMCCLK_MD); - pxa_gpio_mode(GPIO112_MMCCMD_MD); - pxa_gpio_mode(GPIO92_MMCDAT0_MD); - pxa_gpio_mode(GPIO109_MMCDAT1_MD); - pxa_gpio_mode(GPIO110_MMCDAT2_MD); - pxa_gpio_mode(GPIO111_MMCDAT3_MD); - - /* EM-X270 uses GPIO13 as SD power enable */ - pxa_gpio_mode(EM_X270_MMC_PD | GPIO_OUT); - - err = request_irq(EM_X270_MMC_IRQ, em_x270_detect_int, - IRQF_DISABLED | IRQF_TRIGGER_FALLING, - "MMC card detect", data); + int err = request_irq(EM_X270_MMC_CD, em_x270_detect_int, + IRQF_DISABLED | IRQF_TRIGGER_FALLING, + "MMC card detect", data); if (err) { printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n", __func__, err); @@ -279,7 +426,8 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd) static void em_x270_mci_exit(struct device *dev, void *data) { - free_irq(EM_X270_MMC_IRQ, data); + int irq = gpio_to_irq(GPIO13_MMC_CD); + free_irq(irq, data); } static struct pxamci_platform_data em_x270_mci_platform_data = { @@ -289,7 +437,16 @@ static struct pxamci_platform_data em_x270_mci_platform_data = { .exit = em_x270_mci_exit, }; +static void __init em_x270_init_mmc(void) +{ + pxa_set_mci_info(&em_x270_mci_platform_data); +} +#else +static inline void em_x270_init_mmc(void) {} +#endif + /* LCD 480x640 */ +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) static struct pxafb_mode_info em_x270_lcd_mode = { .pixclock = 50000, .bpp = 16, @@ -307,40 +464,96 @@ static struct pxafb_mode_info em_x270_lcd_mode = { static struct pxafb_mach_info em_x270_lcd = { .modes = &em_x270_lcd_mode, .num_modes = 1, - .cmap_inverse = 0, - .cmap_static = 0, - .lccr0 = LCCR0_PAS, - .lccr3 = LCCR3_PixClkDiv(0x01) | LCCR3_Acb(0xff), + .lcd_conn = LCD_COLOR_TFT_16BPP, }; - -static void __init em_x270_init(void) +static void __init em_x270_init_lcd(void) { - /* setup LCD */ set_pxa_fb_info(&em_x270_lcd); +} +#else +static inline void em_x270_init_lcd(void) {} +#endif - /* register EM-X270 platform devices */ - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE) +static void __init em_x270_init_ac97(void) +{ pxa_set_ac97_info(NULL); +} +#else +static inline void em_x270_init_ac97(void) {} +#endif + +#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE) +static unsigned int em_x270_matrix_keys[] = { + KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B), + KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT), + KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D), +}; - /* set MCI and OHCI platform parameters */ - pxa_set_mci_info(&em_x270_mci_platform_data); - pxa_set_ohci_info(&em_x270_ohci_platform_data); +struct pxa27x_keypad_platform_data em_x270_keypad_info = { + /* code map for the matrix keys */ + .matrix_key_rows = 3, + .matrix_key_cols = 3, + .matrix_key_map = em_x270_matrix_keys, + .matrix_key_map_size = ARRAY_SIZE(em_x270_matrix_keys), +}; + +static void __init em_x270_init_keypad(void) +{ + pxa_set_keypad_info(&em_x270_keypad_info); +} +#else +static inline void em_x270_init_keypad(void) {} +#endif - /* setup STUART GPIOs */ - pxa_gpio_mode(GPIO46_STRXD_MD); - pxa_gpio_mode(GPIO47_STTXD_MD); +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +static struct gpio_keys_button gpio_keys_button[] = { + [0] = { + .desc = "sleep/wakeup", + .code = KEY_SUSPEND, + .type = EV_PWR, + .gpio = 1, + .wakeup = 1, + }, +}; - /* setup BTUART GPIOs */ - pxa_gpio_mode(GPIO42_BTRXD_MD); - pxa_gpio_mode(GPIO43_BTTXD_MD); - pxa_gpio_mode(GPIO44_BTCTS_MD); - pxa_gpio_mode(GPIO45_BTRTS_MD); +static struct gpio_keys_platform_data em_x270_gpio_keys_data = { + .buttons = gpio_keys_button, + .nbuttons = 1, +}; - /* Setup interrupt for dm9000 */ - set_irq_type(EM_X270_ETHIRQ, IRQT_RISING); +static struct platform_device em_x270_gpio_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &em_x270_gpio_keys_data, + }, +}; + +static void __init em_x270_init_gpio_keys(void) +{ + platform_device_register(&em_x270_gpio_keys); +} +#else +static inline void em_x270_init_gpio_keys(void) {} +#endif + +static void __init em_x270_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config)); + + em_x270_init_dm9000(); + em_x270_init_rtc(); + em_x270_init_nand(); + em_x270_init_lcd(); + em_x270_init_mmc(); + em_x270_init_ohci(); + em_x270_init_keypad(); + em_x270_init_gpio_keys(); + em_x270_init_ac97(); } -MACHINE_START(EM_X270, "Compulab EM-x270") +MACHINE_START(EM_X270, "Compulab EM-X270") .boot_params = 0xa0000100, .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, -- cgit v0.10.2 From 2f01a973729712c373ccc8acde4d218c38f3029a Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Tue, 17 Jun 2008 12:29:58 +0100 Subject: [ARM] 5103/2: CM-X270: update core platform support Convert CM-X270 pin configuration to use MFP tables. Make device initialization dependent on respective driver CONFIG_ value (like in zylonite). Cleanup includes Signed-off-by: Mike Rapoport Acked-by: Eric Miao Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c index 319c9ff..bcf0cde 100644 --- a/arch/arm/mach-pxa/cm-x270-pci.c +++ b/arch/arm/mach-pxa/cm-x270-pci.c @@ -5,7 +5,7 @@ * * Bits taken from various places. * - * Copyright (C) 2007 Compulab, Ltd. + * Copyright (C) 2007, 2008 Compulab, Ltd. * Mike Rapoport * * This program is free software; you can redistribute it and/or modify @@ -19,16 +19,16 @@ #include #include #include +#include #include -#include #include -#include #include #include -unsigned long it8152_base_address = CMX270_IT8152_VIRT; +unsigned long it8152_base_address; +static int cmx270_it8152_irq_gpio; /* * Only first 64MB of memory can be accessed via PCI. @@ -42,7 +42,7 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size, unsigned int sz = SZ_64M >> PAGE_SHIFT; if (machine_is_armcore()) { - pr_info("Adjusting zones for CM-x270\n"); + pr_info("Adjusting zones for CM-X270\n"); /* * Only adjust if > 64M on current system @@ -60,19 +60,20 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size, static void cmx270_it8152_irq_demux(unsigned int irq, struct irq_desc *desc) { /* clear our parent irq */ - GEDR(GPIO_IT8152_IRQ) = GPIO_bit(GPIO_IT8152_IRQ); + GEDR(cmx270_it8152_irq_gpio) = GPIO_bit(cmx270_it8152_irq_gpio); it8152_irq_demux(irq, desc); } -void __cmx270_pci_init_irq(void) +void __cmx270_pci_init_irq(int irq_gpio) { it8152_init_irq(); - pxa_gpio_mode(IRQ_TO_GPIO(GPIO_IT8152_IRQ)); - set_irq_type(IRQ_GPIO(GPIO_IT8152_IRQ), IRQT_RISING); - set_irq_chained_handler(IRQ_GPIO(GPIO_IT8152_IRQ), - cmx270_it8152_irq_demux); + cmx270_it8152_irq_gpio = irq_gpio; + + set_irq_type(gpio_to_irq(irq_gpio), IRQT_RISING); + + set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux); } #ifdef CONFIG_PM @@ -115,8 +116,8 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) /* Here comes the ugly part. The routing is baseboard specific, - but defining a platform for each possible base of CM-x270 is - unrealistic. Here we keep mapping for ATXBase and SB-x270. + but defining a platform for each possible base of CM-X270 is + unrealistic. Here we keep mapping for ATXBase and SB-X270. */ /* ATXBASE PCI slot */ if (slot == 7) diff --git a/arch/arm/mach-pxa/cm-x270-pci.h b/arch/arm/mach-pxa/cm-x270-pci.h index ffe37b6..48f532f 100644 --- a/arch/arm/mach-pxa/cm-x270-pci.h +++ b/arch/arm/mach-pxa/cm-x270-pci.h @@ -1,13 +1,13 @@ -extern void __cmx270_pci_init_irq(void); +extern void __cmx270_pci_init_irq(int irq_gpio); extern void __cmx270_pci_suspend(void); extern void __cmx270_pci_resume(void); #ifdef CONFIG_PCI -#define cmx270_pci_init_irq __cmx270_pci_init_irq -#define cmx270_pci_suspend __cmx270_pci_suspend -#define cmx270_pci_resume __cmx270_pci_resume +#define cmx270_pci_init_irq(x) __cmx270_pci_init_irq(x) +#define cmx270_pci_suspend(x) __cmx270_pci_suspend(x) +#define cmx270_pci_resume(x) __cmx270_pci_resume(x) #else -#define cmx270_pci_init_irq() do {} while (0) -#define cmx270_pci_suspend() do {} while (0) -#define cmx270_pci_resume() do {} while (0) +#define cmx270_pci_init_irq(x) do {} while (0) +#define cmx270_pci_suspend(x) do {} while (0) +#define cmx270_pci_resume(x) do {} while (0) #endif diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index b3c3fd7..402e807 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -1,7 +1,7 @@ /* * linux/arch/arm/mach-pxa/cm-x270.c * - * Copyright (C) 2007 CompuLab, Ltd. + * Copyright (C) 2007, 2008 CompuLab, Ltd. * Mike Rapoport * * This program is free software; you can redistribute it and/or modify @@ -9,44 +9,156 @@ * published by the Free Software Foundation. */ -#include -#include -#include #include -#include #include -#include -#include +#include +#include #include #include -#include - #include