From 09f98a825a821f7a3f1b162f9ed023f37213a63b Mon Sep 17 00:00:00 2001 From: Tang Liang Date: Fri, 9 Dec 2011 10:05:54 +0800 Subject: x86, acpi, tboot: Have a ACPI os prepare sleep instead of calling tboot_sleep. The ACPI suspend path makes a call to tboot_sleep right before it writes the PM1A, PM1B values. We replace the direct call to tboot via an registration callback similar to __acpi_register_gsi. CC: Len Brown Acked-by: Joseph Cihula Acked-by: Rafael J. Wysocki [v1: Added __attribute__ ((unused))] [v2: Introduced a wrapper instead of changing tboot_sleep return values] [v3: Added return value AE_CTRL_SKIP for acpi_os_sleep_prepare] Signed-off-by: Tang Liang [v1: Fix compile issues on IA64 and PPC64] [v2: Fix where __acpi_os_prepare_sleep==NULL and did not go in sleep properly] Signed-off-by: Konrad Rzeszutek Wilk diff --git a/arch/x86/kernel/tboot.c b/arch/x86/kernel/tboot.c index e2410e2..1a4ab7d 100644 --- a/arch/x86/kernel/tboot.c +++ b/arch/x86/kernel/tboot.c @@ -297,6 +297,12 @@ void tboot_sleep(u8 sleep_state, u32 pm1a_control, u32 pm1b_control) tboot_shutdown(acpi_shutdown_map[sleep_state]); } +static int tboot_sleep_wrapper(u8 sleep_state, u32 pm1a_control, + u32 pm1b_control) +{ + tboot_sleep(sleep_state, pm1a_control, pm1b_control); + return 0; +} static atomic_t ap_wfs_count; @@ -345,6 +351,8 @@ static __init int tboot_late_init(void) atomic_set(&ap_wfs_count, 0); register_hotcpu_notifier(&tboot_cpu_notifier); + + acpi_os_set_prepare_sleep(&tboot_sleep_wrapper); return 0; } diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c index d52da30..992359a 100644 --- a/drivers/acpi/acpica/hwsleep.c +++ b/drivers/acpi/acpica/hwsleep.c @@ -43,9 +43,9 @@ */ #include +#include #include "accommon.h" #include "actables.h" -#include #include #define _COMPONENT ACPI_HARDWARE @@ -344,8 +344,12 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) ACPI_FLUSH_CPU_CACHE(); - tboot_sleep(sleep_state, pm1a_control, pm1b_control); - + status = acpi_os_prepare_sleep(sleep_state, pm1a_control, + pm1b_control); + if (ACPI_SKIP(status)) + return_ACPI_STATUS(AE_OK); + if (ACPI_FAILURE(status)) + return_ACPI_STATUS(status); /* Write #2: Write both SLP_TYP + SLP_EN */ status = acpi_hw_write_pm1_control(pm1a_control, pm1b_control); diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index f31c5c5..f3aae4b 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -76,6 +76,9 @@ EXPORT_SYMBOL(acpi_in_debugger); extern char line_buf[80]; #endif /*ENABLE_DEBUGGER */ +static int (*__acpi_os_prepare_sleep)(u8 sleep_state, u32 pm1a_ctrl, + u32 pm1b_ctrl); + static acpi_osd_handler acpi_irq_handler; static void *acpi_irq_context; static struct workqueue_struct *kacpid_wq; @@ -1659,3 +1662,24 @@ acpi_status acpi_os_terminate(void) return AE_OK; } + +acpi_status acpi_os_prepare_sleep(u8 sleep_state, u32 pm1a_control, + u32 pm1b_control) +{ + int rc = 0; + if (__acpi_os_prepare_sleep) + rc = __acpi_os_prepare_sleep(sleep_state, + pm1a_control, pm1b_control); + if (rc < 0) + return AE_ERROR; + else if (rc > 0) + return AE_CTRL_SKIP; + + return AE_OK; +} + +void acpi_os_set_prepare_sleep(int (*func)(u8 sleep_state, + u32 pm1a_ctrl, u32 pm1b_ctrl)) +{ + __acpi_os_prepare_sleep = func; +} diff --git a/include/acpi/acexcep.h b/include/acpi/acexcep.h index 5b6c391..fa0d22c 100644 --- a/include/acpi/acexcep.h +++ b/include/acpi/acexcep.h @@ -57,6 +57,7 @@ #define ACPI_SUCCESS(a) (!(a)) #define ACPI_FAILURE(a) (a) +#define ACPI_SKIP(a) (a == AE_CTRL_SKIP) #define AE_OK (acpi_status) 0x0000 /* diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 6001b4da..fccd017 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -359,4 +359,14 @@ static inline int suspend_nvs_register(unsigned long a, unsigned long b) } #endif +#ifdef CONFIG_ACPI +void acpi_os_set_prepare_sleep(int (*func)(u8 sleep_state, + u32 pm1a_ctrl, u32 pm1b_ctrl)); + +acpi_status acpi_os_prepare_sleep(u8 sleep_state, + u32 pm1a_control, u32 pm1b_control); +#else +#define acpi_os_set_prepare_sleep(func, pm1a_ctrl, pm1b_ctrl) do { } while (0) +#endif + #endif /*_LINUX_ACPI_H*/ diff --git a/include/linux/tboot.h b/include/linux/tboot.h index 1dba6ee..c75128b 100644 --- a/include/linux/tboot.h +++ b/include/linux/tboot.h @@ -143,7 +143,6 @@ static inline int tboot_enabled(void) extern void tboot_probe(void); extern void tboot_shutdown(u32 shutdown_type); -extern void tboot_sleep(u8 sleep_state, u32 pm1a_control, u32 pm1b_control); extern struct acpi_table_header *tboot_get_dmar_table( struct acpi_table_header *dmar_tbl); extern int tboot_force_iommu(void); -- cgit v0.10.2 From a1f37788a6d8c037e7d92fe4a0fe9ec0d713b21e Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Thu, 8 Dec 2011 17:14:08 +0800 Subject: tboot: Add return values for tboot_sleep .. as appropiately. As tboot_sleep now returns values. remove tboot_sleep_wrapper. Suggested-and-Acked-by: Rafael J. Wysocki Acked-by: Joseph Cihula [v1: Return -1/0/+1 instead of ACPI_xx values] Signed-off-by: Konrad Rzeszutek Wilk diff --git a/arch/x86/kernel/tboot.c b/arch/x86/kernel/tboot.c index 1a4ab7d..6410744 100644 --- a/arch/x86/kernel/tboot.c +++ b/arch/x86/kernel/tboot.c @@ -272,7 +272,7 @@ static void tboot_copy_fadt(const struct acpi_table_fadt *fadt) offsetof(struct acpi_table_facs, firmware_waking_vector); } -void tboot_sleep(u8 sleep_state, u32 pm1a_control, u32 pm1b_control) +static int tboot_sleep(u8 sleep_state, u32 pm1a_control, u32 pm1b_control) { static u32 acpi_shutdown_map[ACPI_S_STATE_COUNT] = { /* S0,1,2: */ -1, -1, -1, @@ -281,7 +281,7 @@ void tboot_sleep(u8 sleep_state, u32 pm1a_control, u32 pm1b_control) /* S5: */ TB_SHUTDOWN_S5 }; if (!tboot_enabled()) - return; + return 0; tboot_copy_fadt(&acpi_gbl_FADT); tboot->acpi_sinfo.pm1a_cnt_val = pm1a_control; @@ -292,15 +292,10 @@ void tboot_sleep(u8 sleep_state, u32 pm1a_control, u32 pm1b_control) if (sleep_state >= ACPI_S_STATE_COUNT || acpi_shutdown_map[sleep_state] == -1) { pr_warning("unsupported sleep state 0x%x\n", sleep_state); - return; + return -1; } tboot_shutdown(acpi_shutdown_map[sleep_state]); -} -static int tboot_sleep_wrapper(u8 sleep_state, u32 pm1a_control, - u32 pm1b_control) -{ - tboot_sleep(sleep_state, pm1a_control, pm1b_control); return 0; } @@ -352,7 +347,7 @@ static __init int tboot_late_init(void) atomic_set(&ap_wfs_count, 0); register_hotcpu_notifier(&tboot_cpu_notifier); - acpi_os_set_prepare_sleep(&tboot_sleep_wrapper); + acpi_os_set_prepare_sleep(&tboot_sleep); return 0; } -- cgit v0.10.2 From cf450136bfde77c7f95065c91bffded4aa7fa731 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Sun, 31 Jul 2011 13:23:49 -0400 Subject: ACPI: ignore FADT reset-reg-sup flag we check that the address is non-zero later anyway. https://bugzilla.kernel.org/show_bug.cgi?id=11533 Signed-off-by: Len Brown diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c index 9d38eb6..fe1fb63 100644 --- a/drivers/acpi/acpica/hwxface.c +++ b/drivers/acpi/acpica/hwxface.c @@ -74,8 +74,7 @@ acpi_status acpi_reset(void) /* Check if the reset register is supported */ - if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER) || - !reset_reg->address) { + if (!reset_reg->address) { return_ACPI_STATUS(AE_NOT_EXIST); } diff --git a/drivers/acpi/reboot.c b/drivers/acpi/reboot.c index a6c77e8b..c1d6124 100644 --- a/drivers/acpi/reboot.c +++ b/drivers/acpi/reboot.c @@ -23,8 +23,7 @@ void acpi_reboot(void) /* Is the reset register supported? The spec says we should be * checking the bit width and bit offset, but Windows ignores * these fields */ - if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER)) - return; + /* Ignore also acpi_gbl_FADT.flags.ACPI_FADT_RESET_REGISTER */ reset_value = acpi_gbl_FADT.reset_value; -- cgit v0.10.2 From 3e80acd1af40fcd91a200b0416a7616b20c5d647 Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Thu, 23 Feb 2012 22:40:43 +0200 Subject: ACPICA: Fix regression in FADT revision checks commit 64b3db22c04586997ab4be46dd5a5b99f8a2d390 (2.6.39), "Remove use of unreliable FADT revision field" causes regression for old P4 systems because now cst_control and other fields are not reset to 0. The effect is that acpi_processor_power_init will notice cst_control != 0 and a write to CST_CNT register is performed that should not happen. As result, the system oopses after the "No _CST, giving up" message, sometimes in acpi_ns_internalize_name, sometimes in acpi_ns_get_type, usually at random places. May be during migration to CPU 1 in acpi_processor_get_throttling. Every one of these settings help to avoid this problem: - acpi=off - processor.nocst=1 - maxcpus=1 The fix is to update acpi_gbl_FADT.header.length after the original value is used to check for old revisions. https://bugzilla.kernel.org/show_bug.cgi?id=42700 https://bugzilla.redhat.com/show_bug.cgi?id=727865 Signed-off-by: Julian Anastasov Acked-by: Bob Moore Signed-off-by: Len Brown diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c index c5d8704..4c9c760 100644 --- a/drivers/acpi/acpica/tbfadt.c +++ b/drivers/acpi/acpica/tbfadt.c @@ -363,10 +363,6 @@ static void acpi_tb_convert_fadt(void) u32 address32; u32 i; - /* Update the local FADT table header length */ - - acpi_gbl_FADT.header.length = sizeof(struct acpi_table_fadt); - /* * Expand the 32-bit FACS and DSDT addresses to 64-bit as necessary. * Later code will always use the X 64-bit field. Also, check for an @@ -408,6 +404,10 @@ static void acpi_tb_convert_fadt(void) acpi_gbl_FADT.boot_flags = 0; } + /* Update the local FADT table header length */ + + acpi_gbl_FADT.header.length = sizeof(struct acpi_table_fadt); + /* * Expand the ACPI 1.0 32-bit addresses to the ACPI 2.0 64-bit "X" * generic address structures as necessary. Later code will always use -- cgit v0.10.2 From e1689795a784a7c41ac4cf9032794986b095a133 Mon Sep 17 00:00:00 2001 From: Robert Lee Date: Tue, 20 Mar 2012 15:22:42 -0500 Subject: cpuidle: Add common time keeping and irq enabling Make necessary changes to implement time keeping and irq enabling in the core cpuidle code. This will allow the removal of these functionalities from various platform cpuidle implementations whose timekeeping and irq enabling follows the form in this common code. Signed-off-by: Robert Lee Tested-by: Jean Pihet Tested-by: Amit Daniel Tested-by: Robert Lee Reviewed-by: Kevin Hilman Reviewed-by: Daniel Lezcano Reviewed-by: Deepthi Dharwar Acked-by: Jean Pihet Signed-off-by: Len Brown diff --git a/arch/arm/include/asm/cpuidle.h b/arch/arm/include/asm/cpuidle.h new file mode 100644 index 0000000..2fca60a --- /dev/null +++ b/arch/arm/include/asm/cpuidle.h @@ -0,0 +1,29 @@ +#ifndef __ASM_ARM_CPUIDLE_H +#define __ASM_ARM_CPUIDLE_H + +#ifdef CONFIG_CPU_IDLE +extern int arm_cpuidle_simple_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index); +#else +static inline int arm_cpuidle_simple_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) { return -ENODEV; } +#endif + +/* Common ARM WFI state */ +#define ARM_CPUIDLE_WFI_STATE_PWR(p) {\ + .enter = arm_cpuidle_simple_enter,\ + .exit_latency = 1,\ + .target_residency = 1,\ + .power_usage = p,\ + .flags = CPUIDLE_FLAG_TIME_VALID,\ + .name = "WFI",\ + .desc = "ARM WFI",\ +} + +/* + * in case power_specified == 1, give a default WFI power value needed + * by some governors + */ +#define ARM_CPUIDLE_WFI_STATE ARM_CPUIDLE_WFI_STATE_PWR(UINT_MAX) + +#endif diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 43b740d..940c27f 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -21,7 +21,7 @@ obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += compat.o obj-$(CONFIG_LEDS) += leds.o obj-$(CONFIG_OC_ETM) += etm.o - +obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_ISA_DMA_API) += dma.o obj-$(CONFIG_ARCH_ACORN) += ecard.o obj-$(CONFIG_FIQ) += fiq.o fiqasm.o diff --git a/arch/arm/kernel/cpuidle.c b/arch/arm/kernel/cpuidle.c new file mode 100644 index 0000000..89545f6 --- /dev/null +++ b/arch/arm/kernel/cpuidle.c @@ -0,0 +1,21 @@ +/* + * Copyright 2012 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include + +int arm_cpuidle_simple_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + cpu_do_idle(); + + return index; +} diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index 59f4261..4869b55 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -53,6 +53,24 @@ static void cpuidle_kick_cpus(void) {} static int __cpuidle_register_device(struct cpuidle_device *dev); +static inline int cpuidle_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + struct cpuidle_state *target_state = &drv->states[index]; + return target_state->enter(dev, drv, index); +} + +static inline int cpuidle_enter_tk(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + return cpuidle_wrap_enter(dev, drv, index, cpuidle_enter); +} + +typedef int (*cpuidle_enter_t)(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index); + +static cpuidle_enter_t cpuidle_enter_ops; + /** * cpuidle_idle_call - the main idle loop * @@ -63,7 +81,6 @@ int cpuidle_idle_call(void) { struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices); struct cpuidle_driver *drv = cpuidle_get_driver(); - struct cpuidle_state *target_state; int next_state, entered_state; if (off) @@ -92,12 +109,10 @@ int cpuidle_idle_call(void) return 0; } - target_state = &drv->states[next_state]; - trace_power_start(POWER_CSTATE, next_state, dev->cpu); trace_cpu_idle(next_state, dev->cpu); - entered_state = target_state->enter(dev, drv, next_state); + entered_state = cpuidle_enter_ops(dev, drv, next_state); trace_power_end(dev->cpu); trace_cpu_idle(PWR_EVENT_EXIT, dev->cpu); @@ -110,6 +125,8 @@ int cpuidle_idle_call(void) dev->states_usage[entered_state].time += (unsigned long long)dev->last_residency; dev->states_usage[entered_state].usage++; + } else { + dev->last_residency = 0; } /* give the governor an opportunity to reflect on the outcome */ @@ -164,6 +181,37 @@ void cpuidle_resume_and_unlock(void) EXPORT_SYMBOL_GPL(cpuidle_resume_and_unlock); +/** + * cpuidle_wrap_enter - performs timekeeping and irqen around enter function + * @dev: pointer to a valid cpuidle_device object + * @drv: pointer to a valid cpuidle_driver object + * @index: index of the target cpuidle state. + */ +int cpuidle_wrap_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index, + int (*enter)(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index)) +{ + ktime_t time_start, time_end; + s64 diff; + + time_start = ktime_get(); + + index = enter(dev, drv, index); + + time_end = ktime_get(); + + local_irq_enable(); + + diff = ktime_to_us(ktime_sub(time_end, time_start)); + if (diff > INT_MAX) + diff = INT_MAX; + + dev->last_residency = (int) diff; + + return index; +} + #ifdef CONFIG_ARCH_HAS_CPU_RELAX static int poll_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) @@ -212,10 +260,11 @@ static void poll_idle_init(struct cpuidle_driver *drv) {} int cpuidle_enable_device(struct cpuidle_device *dev) { int ret, i; + struct cpuidle_driver *drv = cpuidle_get_driver(); if (dev->enabled) return 0; - if (!cpuidle_get_driver() || !cpuidle_curr_governor) + if (!drv || !cpuidle_curr_governor) return -EIO; if (!dev->state_count) return -EINVAL; @@ -226,13 +275,16 @@ int cpuidle_enable_device(struct cpuidle_device *dev) return ret; } - poll_idle_init(cpuidle_get_driver()); + cpuidle_enter_ops = drv->en_core_tk_irqen ? + cpuidle_enter_tk : cpuidle_enter; + + poll_idle_init(drv); if ((ret = cpuidle_add_state_sysfs(dev))) return ret; if (cpuidle_curr_governor->enable && - (ret = cpuidle_curr_governor->enable(cpuidle_get_driver(), dev))) + (ret = cpuidle_curr_governor->enable(drv, dev))) goto fail_sysfs; for (i = 0; i < dev->state_count; i++) { diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 712abcc..927db28 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -15,6 +15,7 @@ #include #include #include +#include #define CPUIDLE_STATE_MAX 8 #define CPUIDLE_NAME_LEN 16 @@ -122,6 +123,8 @@ struct cpuidle_driver { struct module *owner; unsigned int power_specified:1; + /* set to 1 to use the core cpuidle time keeping (for all states). */ + unsigned int en_core_tk_irqen:1; struct cpuidle_state states[CPUIDLE_STATE_MAX]; int state_count; int safe_state_index; @@ -140,7 +143,10 @@ extern void cpuidle_pause_and_lock(void); extern void cpuidle_resume_and_unlock(void); extern int cpuidle_enable_device(struct cpuidle_device *dev); extern void cpuidle_disable_device(struct cpuidle_device *dev); - +extern int cpuidle_wrap_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index, + int (*enter)(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index)); #else static inline void disable_cpuidle(void) { } static inline int cpuidle_idle_call(void) { return -ENODEV; } @@ -157,6 +163,11 @@ static inline void cpuidle_resume_and_unlock(void) { } static inline int cpuidle_enable_device(struct cpuidle_device *dev) {return -ENODEV; } static inline void cpuidle_disable_device(struct cpuidle_device *dev) { } +static inline int cpuidle_wrap_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index, + int (*enter)(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index)) +{ return -ENODEV; } #endif -- cgit v0.10.2 From 7e348b9012522fa0efd854d20d210d5e57fcedd1 Mon Sep 17 00:00:00 2001 From: Robert Lee Date: Tue, 20 Mar 2012 15:22:43 -0500 Subject: ARM: at91: Consolidate time keeping and irq enable Enable core cpuidle timekeeping and irq enabling and remove that handling from this code. Signed-off-by: Robert Lee Reviewed-by: Kevin Hilman Reviewed-by: Daniel Lezcano Acked-by: Jean Pihet Signed-off-by: Len Brown diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c index a851e6c..d40b3f3 100644 --- a/arch/arm/mach-at91/cpuidle.c +++ b/arch/arm/mach-at91/cpuidle.c @@ -17,9 +17,10 @@ #include #include #include -#include #include #include +#include +#include #include "pm.h" @@ -27,66 +28,46 @@ static DEFINE_PER_CPU(struct cpuidle_device, at91_cpuidle_device); -static struct cpuidle_driver at91_idle_driver = { - .name = "at91_idle", - .owner = THIS_MODULE, -}; - /* Actual code that puts the SoC in different idle states */ static int at91_enter_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - struct timeval before, after; - int idle_time; u32 saved_lpr; - local_irq_disable(); - do_gettimeofday(&before); - if (index == 0) - /* Wait for interrupt state */ - cpu_do_idle(); - else if (index == 1) { - asm("b 1f; .align 5; 1:"); - asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */ - saved_lpr = sdram_selfrefresh_enable(); - cpu_do_idle(); - sdram_selfrefresh_disable(saved_lpr); - } - do_gettimeofday(&after); - local_irq_enable(); - idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + - (after.tv_usec - before.tv_usec); + __asm__("b 1f; .align 5; 1:\n" + " mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */ + + saved_lpr = sdram_selfrefresh_enable(); + cpu_do_idle(); + sdram_selfrefresh_disable(saved_lpr); - dev->last_residency = idle_time; return index; } +static struct cpuidle_driver at91_idle_driver = { + .name = "at91_idle", + .owner = THIS_MODULE, + .en_core_tk_irqen = 1, + .states[0] = ARM_CPUIDLE_WFI_STATE, + .states[1] = { + .enter = at91_enter_idle, + .exit_latency = 10, + .target_residency = 100000, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "RAM_SR", + .desc = "WFI and DDR Self Refresh", + }, + .state_count = AT91_MAX_STATES, +}; + /* Initialize CPU idle by registering the idle states */ static int at91_init_cpuidle(void) { struct cpuidle_device *device; - struct cpuidle_driver *driver = &at91_idle_driver; device = &per_cpu(at91_cpuidle_device, smp_processor_id()); device->state_count = AT91_MAX_STATES; - driver->state_count = AT91_MAX_STATES; - - /* Wait for interrupt state */ - driver->states[0].enter = at91_enter_idle; - driver->states[0].exit_latency = 1; - driver->states[0].target_residency = 10000; - driver->states[0].flags = CPUIDLE_FLAG_TIME_VALID; - strcpy(driver->states[0].name, "WFI"); - strcpy(driver->states[0].desc, "Wait for interrupt"); - - /* Wait for interrupt and RAM self refresh state */ - driver->states[1].enter = at91_enter_idle; - driver->states[1].exit_latency = 10; - driver->states[1].target_residency = 10000; - driver->states[1].flags = CPUIDLE_FLAG_TIME_VALID; - strcpy(driver->states[1].name, "RAM_SR"); - strcpy(driver->states[1].desc, "WFI and RAM Self Refresh"); cpuidle_register_driver(&at91_idle_driver); -- cgit v0.10.2 From b334648db0ff2d07b00d81cf033c6eddff277680 Mon Sep 17 00:00:00 2001 From: Robert Lee Date: Tue, 20 Mar 2012 15:22:44 -0500 Subject: ARM: kirkwood: Consolidate time keeping and irq enable Enable core cpuidle timekeeping and irq enabling and remove that handling from this code. Signed-off-by: Robert Lee Reviewed-by: Kevin Hilman Reviewed-by: Daniel Lezcano Acked-by: Jean Pihet Signed-off-by: Len Brown diff --git a/arch/arm/mach-kirkwood/cpuidle.c b/arch/arm/mach-kirkwood/cpuidle.c index 7088180..0f17109 100644 --- a/arch/arm/mach-kirkwood/cpuidle.c +++ b/arch/arm/mach-kirkwood/cpuidle.c @@ -20,77 +20,47 @@ #include #include #include +#include #include #define KIRKWOOD_MAX_STATES 2 -static struct cpuidle_driver kirkwood_idle_driver = { - .name = "kirkwood_idle", - .owner = THIS_MODULE, -}; - -static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device); - /* Actual code that puts the SoC in different idle states */ static int kirkwood_enter_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - struct timeval before, after; - int idle_time; - - local_irq_disable(); - do_gettimeofday(&before); - if (index == 0) - /* Wait for interrupt state */ - cpu_do_idle(); - else if (index == 1) { - /* - * Following write will put DDR in self refresh. - * Note that we have 256 cycles before DDR puts it - * self in self-refresh, so the wait-for-interrupt - * call afterwards won't get the DDR from self refresh - * mode. - */ - writel(0x7, DDR_OPERATION_BASE); - cpu_do_idle(); - } - do_gettimeofday(&after); - local_irq_enable(); - idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + - (after.tv_usec - before.tv_usec); - - /* Update last residency */ - dev->last_residency = idle_time; + writel(0x7, DDR_OPERATION_BASE); + cpu_do_idle(); return index; } +static struct cpuidle_driver kirkwood_idle_driver = { + .name = "kirkwood_idle", + .owner = THIS_MODULE, + .en_core_tk_irqen = 1, + .states[0] = ARM_CPUIDLE_WFI_STATE, + .states[1] = { + .enter = kirkwood_enter_idle, + .exit_latency = 10, + .target_residency = 100000, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "DDR SR", + .desc = "WFI and DDR Self Refresh", + }, + .state_count = KIRKWOOD_MAX_STATES, +}; + +static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device); + /* Initialize CPU idle by registering the idle states */ static int kirkwood_init_cpuidle(void) { struct cpuidle_device *device; - struct cpuidle_driver *driver = &kirkwood_idle_driver; device = &per_cpu(kirkwood_cpuidle_device, smp_processor_id()); device->state_count = KIRKWOOD_MAX_STATES; - driver->state_count = KIRKWOOD_MAX_STATES; - - /* Wait for interrupt state */ - driver->states[0].enter = kirkwood_enter_idle; - driver->states[0].exit_latency = 1; - driver->states[0].target_residency = 10000; - driver->states[0].flags = CPUIDLE_FLAG_TIME_VALID; - strcpy(driver->states[0].name, "WFI"); - strcpy(driver->states[0].desc, "Wait for interrupt"); - - /* Wait for interrupt and DDR self refresh state */ - driver->states[1].enter = kirkwood_enter_idle; - driver->states[1].exit_latency = 10; - driver->states[1].target_residency = 10000; - driver->states[1].flags = CPUIDLE_FLAG_TIME_VALID; - strcpy(driver->states[1].name, "DDR SR"); - strcpy(driver->states[1].desc, "WFI and DDR Self Refresh"); cpuidle_register_driver(&kirkwood_idle_driver); if (cpuidle_register_device(device)) { -- cgit v0.10.2 From 19976c2a88d125aec16b9255c7197c297bbdd637 Mon Sep 17 00:00:00 2001 From: Robert Lee Date: Tue, 20 Mar 2012 15:22:45 -0500 Subject: ARM: davinci: Consolidate time keeping and irq enable Enable core cpuidle timekeeping and irq enabling and remove that handling from this code. Signed-off-by: Robert Lee Reviewed-by: Kevin Hilman Reviewed-by: Daniel Lezcano Acked-by: Jean Pihet Signed-off-by: Len Brown diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c index a30c7c5..93ae096 100644 --- a/arch/arm/mach-davinci/cpuidle.c +++ b/arch/arm/mach-davinci/cpuidle.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -30,12 +31,42 @@ struct davinci_ops { u32 flags; }; +/* Actual code that puts the SoC in different idle states */ +static int davinci_enter_idle(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + struct cpuidle_state_usage *state_usage = &dev->states_usage[index]; + struct davinci_ops *ops = cpuidle_get_statedata(state_usage); + + if (ops && ops->enter) + ops->enter(ops->flags); + + index = cpuidle_wrap_enter(dev, drv, index, + arm_cpuidle_simple_enter); + + if (ops && ops->exit) + ops->exit(ops->flags); + + return index; +} + /* fields in davinci_ops.flags */ #define DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN BIT(0) static struct cpuidle_driver davinci_idle_driver = { - .name = "cpuidle-davinci", - .owner = THIS_MODULE, + .name = "cpuidle-davinci", + .owner = THIS_MODULE, + .states[0] = ARM_CPUIDLE_WFI_STATE, + .states[1] = { + .enter = davinci_enter_idle, + .exit_latency = 10, + .target_residency = 100000, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "DDR SR", + .desc = "WFI and DDR Self Refresh", + }, + .state_count = DAVINCI_CPUIDLE_MAX_STATES, }; static DEFINE_PER_CPU(struct cpuidle_device, davinci_cpuidle_device); @@ -77,41 +108,10 @@ static struct davinci_ops davinci_states[DAVINCI_CPUIDLE_MAX_STATES] = { }, }; -/* Actual code that puts the SoC in different idle states */ -static int davinci_enter_idle(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - struct cpuidle_state_usage *state_usage = &dev->states_usage[index]; - struct davinci_ops *ops = cpuidle_get_statedata(state_usage); - struct timeval before, after; - int idle_time; - - local_irq_disable(); - do_gettimeofday(&before); - - if (ops && ops->enter) - ops->enter(ops->flags); - /* Wait for interrupt state */ - cpu_do_idle(); - if (ops && ops->exit) - ops->exit(ops->flags); - - do_gettimeofday(&after); - local_irq_enable(); - idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + - (after.tv_usec - before.tv_usec); - - dev->last_residency = idle_time; - - return index; -} - static int __init davinci_cpuidle_probe(struct platform_device *pdev) { int ret; struct cpuidle_device *device; - struct cpuidle_driver *driver = &davinci_idle_driver; struct davinci_cpuidle_config *pdata = pdev->dev.platform_data; device = &per_cpu(davinci_cpuidle_device, smp_processor_id()); @@ -123,27 +123,11 @@ static int __init davinci_cpuidle_probe(struct platform_device *pdev) ddr2_reg_base = pdata->ddr2_ctlr_base; - /* Wait for interrupt state */ - driver->states[0].enter = davinci_enter_idle; - driver->states[0].exit_latency = 1; - driver->states[0].target_residency = 10000; - driver->states[0].flags = CPUIDLE_FLAG_TIME_VALID; - strcpy(driver->states[0].name, "WFI"); - strcpy(driver->states[0].desc, "Wait for interrupt"); - - /* Wait for interrupt and DDR self refresh state */ - driver->states[1].enter = davinci_enter_idle; - driver->states[1].exit_latency = 10; - driver->states[1].target_residency = 10000; - driver->states[1].flags = CPUIDLE_FLAG_TIME_VALID; - strcpy(driver->states[1].name, "DDR SR"); - strcpy(driver->states[1].desc, "WFI and DDR Self Refresh"); if (pdata->ddr2_pdown) davinci_states[1].flags |= DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN; cpuidle_set_statedata(&device->states_usage[1], &davinci_states[1]); device->state_count = DAVINCI_CPUIDLE_MAX_STATES; - driver->state_count = DAVINCI_CPUIDLE_MAX_STATES; ret = cpuidle_register_driver(&davinci_idle_driver); if (ret) { -- cgit v0.10.2 From 6da45dce3ce4a1f1f2548c9ad9954d57ab0625b3 Mon Sep 17 00:00:00 2001 From: Robert Lee Date: Tue, 20 Mar 2012 15:22:46 -0500 Subject: ARM: omap: Consolidate OMAP3 time keeping and irq enable Use core cpuidle timekeeping and irqen wrapper and remove that handling from this code. Signed-off-by: Robert Lee Reviewed-by: Kevin Hilman Reviewed-by: Daniel Lezcano Tested-by: Jean Pihet Acked-by: Jean Pihet Signed-off-by: Len Brown diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 464cffd..5358664 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -87,29 +87,14 @@ static int _cpuidle_deny_idle(struct powerdomain *pwrdm, return 0; } -/** - * omap3_enter_idle - Programs OMAP3 to enter the specified state - * @dev: cpuidle device - * @drv: cpuidle driver - * @index: the index of state to be entered - * - * Called from the CPUidle framework to program the device to the - * specified target state selected by the governor. - */ -static int omap3_enter_idle(struct cpuidle_device *dev, +static int __omap3_enter_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { struct omap3_idle_statedata *cx = cpuidle_get_statedata(&dev->states_usage[index]); - struct timespec ts_preidle, ts_postidle, ts_idle; u32 mpu_state = cx->mpu_state, core_state = cx->core_state; - int idle_time; - - /* Used to keep track of the total time in idle */ - getnstimeofday(&ts_preidle); - local_irq_disable(); local_fiq_disable(); pwrdm_set_next_pwrst(mpu_pd, mpu_state); @@ -148,22 +133,29 @@ static int omap3_enter_idle(struct cpuidle_device *dev, } return_sleep_time: - getnstimeofday(&ts_postidle); - ts_idle = timespec_sub(ts_postidle, ts_preidle); - local_irq_enable(); local_fiq_enable(); - idle_time = ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * \ - USEC_PER_SEC; - - /* Update cpuidle counters */ - dev->last_residency = idle_time; - return index; } /** + * omap3_enter_idle - Programs OMAP3 to enter the specified state + * @dev: cpuidle device + * @drv: cpuidle driver + * @index: the index of state to be entered + * + * Called from the CPUidle framework to program the device to the + * specified target state selected by the governor. + */ +static inline int omap3_enter_idle(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + return cpuidle_wrap_enter(dev, drv, index, __omap3_enter_idle); +} + +/** * next_valid_state - Find next valid C-state * @dev: cpuidle device * @drv: cpuidle driver -- cgit v0.10.2 From d13e9261ac026f90cccac1e6de3978fb18d4af7b Mon Sep 17 00:00:00 2001 From: Robert Lee Date: Tue, 20 Mar 2012 15:22:47 -0500 Subject: ARM: omap: Consolidate OMAP4 time keeping and irq enable Enable core cpuidle timekeeping and irq enabling and remove that handling from this code. Signed-off-by: Robert Lee Reviewed-by: Kevin Hilman Reviewed-by: Daniel Lezcano Acked-by: Jean Pihet Signed-off-by: Len Brown diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index 72e018b..f386cbe 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -62,15 +62,9 @@ static int omap4_enter_idle(struct cpuidle_device *dev, { struct omap4_idle_statedata *cx = cpuidle_get_statedata(&dev->states_usage[index]); - struct timespec ts_preidle, ts_postidle, ts_idle; u32 cpu1_state; - int idle_time; int cpu_id = smp_processor_id(); - /* Used to keep track of the total time in idle */ - getnstimeofday(&ts_preidle); - - local_irq_disable(); local_fiq_disable(); /* @@ -128,26 +122,17 @@ static int omap4_enter_idle(struct cpuidle_device *dev, if (index > 0) clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu_id); - getnstimeofday(&ts_postidle); - ts_idle = timespec_sub(ts_postidle, ts_preidle); - - local_irq_enable(); local_fiq_enable(); - idle_time = ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * \ - USEC_PER_SEC; - - /* Update cpuidle counters */ - dev->last_residency = idle_time; - return index; } DEFINE_PER_CPU(struct cpuidle_device, omap4_idle_dev); struct cpuidle_driver omap4_idle_driver = { - .name = "omap4_idle", - .owner = THIS_MODULE, + .name = "omap4_idle", + .owner = THIS_MODULE, + .en_core_tk_irqen = 1, }; static inline void _fill_cstate(struct cpuidle_driver *drv, -- cgit v0.10.2 From ee807dd89c0003a5cc0ec961132cd83542e5c30c Mon Sep 17 00:00:00 2001 From: Robert Lee Date: Tue, 20 Mar 2012 15:22:48 -0500 Subject: ARM: shmobile: Consolidate time keeping and irq enable Enable core cpuidle timekeeping and irq enabling and remove that handling from this code. Signed-off-by: Robert Lee Reviewed-by: Kevin Hilman Reviewed-by: Daniel Lezcano Acked-by: Jean Pihet Signed-off-by: Len Brown diff --git a/arch/arm/mach-shmobile/cpuidle.c b/arch/arm/mach-shmobile/cpuidle.c index 1b23342..ca23b20 100644 --- a/arch/arm/mach-shmobile/cpuidle.c +++ b/arch/arm/mach-shmobile/cpuidle.c @@ -14,6 +14,7 @@ #include #include #include +#include #include static void shmobile_enter_wfi(void) @@ -29,37 +30,19 @@ static int shmobile_cpuidle_enter(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - ktime_t before, after; - - before = ktime_get(); - - local_irq_disable(); - local_fiq_disable(); - shmobile_cpuidle_modes[index](); - local_irq_enable(); - local_fiq_enable(); - - after = ktime_get(); - dev->last_residency = ktime_to_ns(ktime_sub(after, before)) >> 10; - return index; } static struct cpuidle_device shmobile_cpuidle_dev; static struct cpuidle_driver shmobile_cpuidle_driver = { - .name = "shmobile_cpuidle", - .owner = THIS_MODULE, - .states[0] = { - .name = "C1", - .desc = "WFI", - .exit_latency = 1, - .target_residency = 1 * 2, - .flags = CPUIDLE_FLAG_TIME_VALID, - }, - .safe_state_index = 0, /* C1 */ - .state_count = 1, + .name = "shmobile_cpuidle", + .owner = THIS_MODULE, + .en_core_tk_irqen = 1, + .states[0] = ARM_CPUIDLE_WFI_STATE, + .safe_state_index = 0, /* C1 */ + .state_count = 1, }; void (*shmobile_cpuidle_setup)(struct cpuidle_driver *drv); -- cgit v0.10.2 From 5c48c873baf1a67b93d26770c8fe4d41f26f48af Mon Sep 17 00:00:00 2001 From: Robert Lee Date: Tue, 20 Mar 2012 15:22:49 -0500 Subject: SH: shmobile: Consolidate time keeping and irq enable Enable core cpuidle timekeeping and irq enabling and remove that handling from this code. Signed-off-by: Robert Lee Reviewed-by: Kevin Hilman Reviewed-by: Daniel Lezcano Acked-by: Jean Pihet Signed-off-by: Len Brown diff --git a/arch/sh/kernel/cpu/shmobile/cpuidle.c b/arch/sh/kernel/cpu/shmobile/cpuidle.c index 6d62eb4..1ddc876 100644 --- a/arch/sh/kernel/cpu/shmobile/cpuidle.c +++ b/arch/sh/kernel/cpu/shmobile/cpuidle.c @@ -29,7 +29,6 @@ static int cpuidle_sleep_enter(struct cpuidle_device *dev, int index) { unsigned long allowed_mode = SUSP_SH_SLEEP; - ktime_t before, after; int requested_state = index; int allowed_state; int k; @@ -47,19 +46,16 @@ static int cpuidle_sleep_enter(struct cpuidle_device *dev, */ k = min_t(int, allowed_state, requested_state); - before = ktime_get(); sh_mobile_call_standby(cpuidle_mode[k]); - after = ktime_get(); - - dev->last_residency = (int)ktime_to_ns(ktime_sub(after, before)) >> 10; return k; } static struct cpuidle_device cpuidle_dev; static struct cpuidle_driver cpuidle_driver = { - .name = "sh_idle", - .owner = THIS_MODULE, + .name = "sh_idle", + .owner = THIS_MODULE, + .en_core_tk_irqen = 1, }; void sh_mobile_setup_cpuidle(void) -- cgit v0.10.2 From b11de07ce561574b6e03c8192b28bad540da8f79 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 21 Mar 2012 12:55:00 -0700 Subject: drivers/thermal/thermal_sys.c: fix build warning With CONFIG_NET=n: drivers/thermal/thermal_sys.c:63: warning: 'thermal_event_seqnum' defined but not used Move 'thermal_event_seqnum' definition inside the '#ifdef CONFIG_NET' [akpm@linux-foundation.org: make thermal_event_seqnum local to generate_netlink_event()] Signed-off-by: Fabio Estevam Acked-by: Guenter Roeck Acked-by: Durgadoss R Cc: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 220ce7e..859b80b 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -60,8 +60,6 @@ static LIST_HEAD(thermal_tz_list); static LIST_HEAD(thermal_cdev_list); static DEFINE_MUTEX(thermal_list_lock); -static unsigned int thermal_event_seqnum; - static int get_idr(struct idr *idr, struct mutex *lock, int *id) { int err; @@ -1312,6 +1310,7 @@ int thermal_generate_netlink_event(u32 orig, enum events event) void *msg_header; int size; int result; + static unsigned int thermal_event_seqnum; /* allocate memory */ size = nla_total_size(sizeof(struct thermal_genl_event)) + \ -- cgit v0.10.2 From 886ee5463530036f6171e1376118e7014cf33f7f Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 21 Mar 2012 12:55:01 -0700 Subject: thermal_sys: remove unnecessary line continuations Line continations are not necessary in function calls or statements. Remove them. Signed-off-by: Joe Perches Reviewed-by: Jesper Juhl Cc: Len Brown Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 859b80b..71802ca 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -281,8 +281,7 @@ passive_show(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR(type, 0444, type_show, NULL); static DEVICE_ATTR(temp, 0444, temp_show, NULL); static DEVICE_ATTR(mode, 0644, mode_show, mode_store); -static DEVICE_ATTR(passive, S_IRUGO | S_IWUSR, passive_show, \ - passive_store); +static DEVICE_ATTR(passive, S_IRUGO | S_IWUSR, passive_show, passive_store); static struct device_attribute trip_point_attrs[] = { __ATTR(trip_point_0_type, 0444, trip_point_type_show, NULL), @@ -1313,8 +1312,8 @@ int thermal_generate_netlink_event(u32 orig, enum events event) static unsigned int thermal_event_seqnum; /* allocate memory */ - size = nla_total_size(sizeof(struct thermal_genl_event)) + \ - nla_total_size(0); + size = nla_total_size(sizeof(struct thermal_genl_event)) + + nla_total_size(0); skb = genlmsg_new(size, GFP_ATOMIC); if (!skb) @@ -1330,8 +1329,8 @@ int thermal_generate_netlink_event(u32 orig, enum events event) } /* fill the data */ - attr = nla_reserve(skb, THERMAL_GENL_ATTR_EVENT, \ - sizeof(struct thermal_genl_event)); + attr = nla_reserve(skb, THERMAL_GENL_ATTR_EVENT, + sizeof(struct thermal_genl_event)); if (!attr) { nlmsg_free(skb); -- cgit v0.10.2 From ec797685609da142588012d734e85d14cff9c7d2 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 21 Mar 2012 12:55:02 -0700 Subject: thermal_sys: remove obfuscating used-once macros These don't add any value as they are used only once and the surrounding code uses similar variable. Signed-off-by: Joe Perches Cc: Jesper Juhl Cc: Len Brown Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 71802ca..11237bc 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -310,22 +310,6 @@ static struct device_attribute trip_point_attrs[] = { __ATTR(trip_point_11_temp, 0444, trip_point_temp_show, NULL), }; -#define TRIP_POINT_ATTR_ADD(_dev, _index, result) \ -do { \ - result = device_create_file(_dev, \ - &trip_point_attrs[_index * 2]); \ - if (result) \ - break; \ - result = device_create_file(_dev, \ - &trip_point_attrs[_index * 2 + 1]); \ -} while (0) - -#define TRIP_POINT_ATTR_REMOVE(_dev, _index) \ -do { \ - device_remove_file(_dev, &trip_point_attrs[_index * 2]); \ - device_remove_file(_dev, &trip_point_attrs[_index * 2 + 1]); \ -} while (0) - /* sys I/F for cooling device */ #define to_cooling_device(_dev) \ container_of(_dev, struct thermal_cooling_device, device) @@ -1196,7 +1180,12 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, } for (count = 0; count < trips; count++) { - TRIP_POINT_ATTR_ADD(&tz->device, count, result); + result = device_create_file(&tz->device, + &trip_point_attrs[count * 2]); + if (result) + break; + result = device_create_file(&tz->device, + &trip_point_attrs[count * 2 + 1]); if (result) goto unregister; tz->ops->get_trip_type(tz, count, &trip_type); @@ -1276,9 +1265,12 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) if (tz->ops->get_mode) device_remove_file(&tz->device, &dev_attr_mode); - for (count = 0; count < tz->trips; count++) - TRIP_POINT_ATTR_REMOVE(&tz->device, count); - + for (count = 0; count < tz->trips; count++) { + device_remove_file(&tz->device, + &trip_point_attrs[count * 2]); + device_remove_file(&tz->device, + &trip_point_attrs[count * 2 + 1]); + } thermal_remove_hwmon_sysfs(tz); release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); idr_destroy(&tz->idr); -- cgit v0.10.2 From caca8b803520b0694423e2ac0ee3d58650b04a12 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 21 Mar 2012 12:55:02 -0700 Subject: thermal_sys: kernel style cleanups Just a few tidies to make it more like most kernel sources. A couple of long lines still remain. Signed-off-by: Joe Perches Reviewed-by: Jesper Juhl Cc: Len Brown Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 11237bc..db5d8f8 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -64,7 +64,7 @@ static int get_idr(struct idr *idr, struct mutex *lock, int *id) { int err; - again: +again: if (unlikely(idr_pre_get(idr, GFP_KERNEL) == 0)) return -ENOMEM; @@ -816,15 +816,14 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, return 0; device_remove_file(&tz->device, &dev->attr); - remove_symbol_link: +remove_symbol_link: sysfs_remove_link(&tz->device.kobj, dev->name); - release_idr: +release_idr: release_idr(&tz->idr, &tz->lock, dev->id); - free_mem: +free_mem: kfree(dev); return result; } - EXPORT_SYMBOL(thermal_zone_bind_cooling_device); /** @@ -854,14 +853,13 @@ int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz, return -ENODEV; - unbind: +unbind: device_remove_file(&tz->device, &pos->attr); sysfs_remove_link(&tz->device.kobj, pos->name); release_idr(&tz->idr, &tz->lock, pos->id); kfree(pos); return 0; } - EXPORT_SYMBOL(thermal_zone_unbind_cooling_device); static void thermal_release(struct device *dev) @@ -869,7 +867,8 @@ static void thermal_release(struct device *dev) struct thermal_zone_device *tz; struct thermal_cooling_device *cdev; - if (!strncmp(dev_name(dev), "thermal_zone", sizeof "thermal_zone" - 1)) { + if (!strncmp(dev_name(dev), "thermal_zone", + sizeof("thermal_zone") - 1)) { tz = to_thermal_zone(dev); kfree(tz); } else { @@ -889,8 +888,9 @@ static struct class thermal_class = { * @devdata: device private data. * @ops: standard thermal cooling devices callbacks. */ -struct thermal_cooling_device *thermal_cooling_device_register( - char *type, void *devdata, const struct thermal_cooling_device_ops *ops) +struct thermal_cooling_device * +thermal_cooling_device_register(char *type, void *devdata, + const struct thermal_cooling_device_ops *ops) { struct thermal_cooling_device *cdev; struct thermal_zone_device *pos; @@ -955,12 +955,11 @@ struct thermal_cooling_device *thermal_cooling_device_register( if (!result) return cdev; - unregister: +unregister: release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id); device_unregister(&cdev->device); return ERR_PTR(result); } - EXPORT_SYMBOL(thermal_cooling_device_register); /** @@ -1005,7 +1004,6 @@ void thermal_cooling_device_unregister(struct device_unregister(&cdev->device); return; } - EXPORT_SYMBOL(thermal_cooling_device_unregister); /** @@ -1081,7 +1079,7 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) tz->last_temperature = temp; - leave: +leave: if (tz->passive) thermal_zone_device_set_polling(tz, tz->passive_delay); else if (tz->polling_delay) @@ -1221,12 +1219,11 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, if (!result) return tz; - unregister: +unregister: release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); device_unregister(&tz->device); return ERR_PTR(result); } - EXPORT_SYMBOL(thermal_zone_device_register); /** @@ -1278,7 +1275,6 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) device_unregister(&tz->device); return; } - EXPORT_SYMBOL(thermal_zone_device_unregister); #ifdef CONFIG_NET -- cgit v0.10.2 From c5a01dd52dc4903772f464ea580895ccc36e911d Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 21 Mar 2012 12:55:02 -0700 Subject: thermal_sys: convert printks to pr_ Use the current logging style. Remove PREFIX, add pr_fmt, convert the printks. All dmesg output now prefixed with "thermal_sys: ". Signed-off-by: Joe Perches Cc: Jesper Juhl Cc: Len Brown Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index db5d8f8..fab970d 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -23,6 +23,8 @@ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -39,8 +41,6 @@ MODULE_AUTHOR("Zhang Rui"); MODULE_DESCRIPTION("Generic thermal management sysfs support"); MODULE_LICENSE("GPL"); -#define PREFIX "Thermal: " - struct thermal_cooling_device_instance { int id; char name[THERMAL_NAME_LENGTH]; @@ -1023,8 +1023,7 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) if (tz->ops->get_temp(tz, &temp)) { /* get_temp failed - retry it later */ - printk(KERN_WARNING PREFIX "failed to read out thermal zone " - "%d\n", tz->id); + pr_warn("failed to read out thermal zone %d\n", tz->id); goto leave; } @@ -1039,9 +1038,8 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) ret = tz->ops->notify(tz, count, trip_type); if (!ret) { - printk(KERN_EMERG - "Critical temperature reached (%ld C), shutting down.\n", - temp/1000); + pr_emerg("Critical temperature reached (%ld C), shutting down\n", + temp/1000); orderly_poweroff(true); } } @@ -1345,7 +1343,7 @@ int thermal_generate_netlink_event(u32 orig, enum events event) result = genlmsg_multicast(skb, 0, thermal_event_mcgrp.id, GFP_ATOMIC); if (result) - printk(KERN_INFO "failed to send netlink event:%d", result); + pr_info("failed to send netlink event:%d\n", result); return result; } -- cgit v0.10.2 From 6a92c36688bd6d8e68e19ca9b5e41e8197921b59 Mon Sep 17 00:00:00 2001 From: Vincenzo Frascino Date: Wed, 21 Mar 2012 12:55:03 -0700 Subject: thermal: add support for thermal sensor present on SPEAr13xx machines ST's SPEAr13xx machines are based on CortexA9 ARM processors. These machines contain a thermal sensor for junction temperature monitoring. This patch adds support for this thermal sensor in existing thermal framework. [akpm@linux-foundation.org: little code cleanup] [akpm@linux-foundation.org: print the pointer correctly] [viresh.kumar@st.com: thermal/spear_thermal: add compilation dependency on PLAT_SPEAR] Signed-off-by: Vincenzo Frascino Signed-off-by: Viresh Kumar Signed-off-by: Viresh Kumar Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index f7f71b2..514a691 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -18,3 +18,11 @@ config THERMAL_HWMON depends on THERMAL depends on HWMON=y || HWMON=THERMAL default y + +config SPEAR_THERMAL + bool "SPEAr thermal sensor driver" + depends on THERMAL + depends on PLAT_SPEAR + help + Enable this to plug the SPEAr thermal sensor driver into the Linux + thermal framework diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 31108a0..a9fff0b 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_THERMAL) += thermal_sys.o +obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o \ No newline at end of file diff --git a/drivers/thermal/spear_thermal.c b/drivers/thermal/spear_thermal.c new file mode 100644 index 0000000..880bf28 --- /dev/null +++ b/drivers/thermal/spear_thermal.c @@ -0,0 +1,206 @@ +/* + * SPEAr thermal driver. + * + * Copyright (C) 2011-2012 ST Microelectronics + * Author: Vincenzo Frascino + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MD_FACTOR 1000 + +/* SPEAr Thermal Sensor Dev Structure */ +struct spear_thermal_dev { + /* pointer to base address of the thermal sensor */ + void __iomem *thermal_base; + /* clk structure */ + struct clk *clk; + /* pointer to thermal flags */ + unsigned int flags; +}; + +static inline int thermal_get_temp(struct thermal_zone_device *thermal, + unsigned long *temp) +{ + struct spear_thermal_dev *stdev = thermal->devdata; + + /* + * Data are ready to be read after 628 usec from POWERDOWN signal + * (PDN) = 1 + */ + *temp = (readl(stdev->thermal_base) & 0x7F) * MD_FACTOR; + return 0; +} + +static struct thermal_zone_device_ops ops = { + .get_temp = thermal_get_temp, +}; + +#ifdef CONFIG_PM +static int spear_thermal_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev); + struct spear_thermal_dev *stdev = spear_thermal->devdata; + unsigned int actual_mask = 0; + + /* Disable SPEAr Thermal Sensor */ + actual_mask = readl(stdev->thermal_base); + writel(actual_mask & ~stdev->flags, stdev->thermal_base); + + clk_disable(stdev->clk); + dev_info(dev, "Suspended.\n"); + + return 0; +} + +static int spear_thermal_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev); + struct spear_thermal_dev *stdev = spear_thermal->devdata; + unsigned int actual_mask = 0; + int ret = 0; + + ret = clk_enable(stdev->clk); + if (ret) { + dev_err(&pdev->dev, "Can't enable clock\n"); + return ret; + } + + /* Enable SPEAr Thermal Sensor */ + actual_mask = readl(stdev->thermal_base); + writel(actual_mask | stdev->flags, stdev->thermal_base); + + dev_info(dev, "Resumed.\n"); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(spear_thermal_pm_ops, spear_thermal_suspend, + spear_thermal_resume); + +static int spear_thermal_probe(struct platform_device *pdev) +{ + struct thermal_zone_device *spear_thermal = NULL; + struct spear_thermal_dev *stdev; + struct spear_thermal_pdata *pdata; + int ret = 0; + struct resource *stres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + if (!stres) { + dev_err(&pdev->dev, "memory resource missing\n"); + return -ENODEV; + } + + pdata = dev_get_platdata(&pdev->dev); + if (!pdata) { + dev_err(&pdev->dev, "platform data is NULL\n"); + return -EINVAL; + } + + stdev = devm_kzalloc(&pdev->dev, sizeof(*stdev), GFP_KERNEL); + if (!stdev) { + dev_err(&pdev->dev, "kzalloc fail\n"); + return -ENOMEM; + } + + /* Enable thermal sensor */ + stdev->thermal_base = devm_ioremap(&pdev->dev, stres->start, + resource_size(stres)); + if (!stdev->thermal_base) { + dev_err(&pdev->dev, "ioremap failed\n"); + return -ENOMEM; + } + + stdev->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(stdev->clk)) { + dev_err(&pdev->dev, "Can't get clock\n"); + return PTR_ERR(stdev->clk); + } + + ret = clk_enable(stdev->clk); + if (ret) { + dev_err(&pdev->dev, "Can't enable clock\n"); + goto put_clk; + } + + stdev->flags = pdata->thermal_flags; + writel(stdev->flags, stdev->thermal_base); + + spear_thermal = thermal_zone_device_register("spear_thermal", 0, + stdev, &ops, 0, 0, 0, 0); + if (!spear_thermal) { + dev_err(&pdev->dev, "thermal zone device is NULL\n"); + ret = -EINVAL; + goto disable_clk; + } + + platform_set_drvdata(pdev, spear_thermal); + + dev_info(&spear_thermal->device, "Thermal Sensor Loaded at: 0x%p.\n", + stdev->thermal_base); + + return 0; + +disable_clk: + clk_disable(stdev->clk); +put_clk: + clk_put(stdev->clk); + + return ret; +} + +static int spear_thermal_exit(struct platform_device *pdev) +{ + unsigned int actual_mask = 0; + struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev); + struct spear_thermal_dev *stdev = spear_thermal->devdata; + + thermal_zone_device_unregister(spear_thermal); + platform_set_drvdata(pdev, NULL); + + /* Disable SPEAr Thermal Sensor */ + actual_mask = readl(stdev->thermal_base); + writel(actual_mask & ~stdev->flags, stdev->thermal_base); + + clk_disable(stdev->clk); + clk_put(stdev->clk); + + return 0; +} + +static struct platform_driver spear_thermal_driver = { + .probe = spear_thermal_probe, + .remove = spear_thermal_exit, + .driver = { + .name = "spear_thermal", + .owner = THIS_MODULE, + .pm = &spear_thermal_pm_ops, + }, +}; + +module_platform_driver(spear_thermal_driver); + +MODULE_AUTHOR("Vincenzo Frascino "); +MODULE_DESCRIPTION("SPEAr thermal driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/platform_data/spear_thermal.h b/include/linux/platform_data/spear_thermal.h new file mode 100644 index 0000000..724f2e1 --- /dev/null +++ b/include/linux/platform_data/spear_thermal.h @@ -0,0 +1,26 @@ +/* + * SPEAr thermal driver platform data. + * + * Copyright (C) 2011-2012 ST Microelectronics + * Author: Vincenzo Frascino + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#ifndef SPEAR_THERMAL_H +#define SPEAR_THERMAL_H + +/* SPEAr Thermal Sensor Platform Data */ +struct spear_thermal_pdata { + /* flags used to enable thermal sensor */ + unsigned int thermal_flags; +}; + +#endif /* SPEAR_THERMAL_H */ -- cgit v0.10.2 From de716e32e61fae5d1f0d000008d3f641cec5c9dd Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 21 Mar 2012 12:55:03 -0700 Subject: thermal/spear_thermal: replace readl/writel with lighter _relaxed variants readl/writel versions for ARM contain memory barrier instruction for synchronizing DMA buffers. These are not required at least on this module. So use lighter _relaxed variants. Signed-off-by: Viresh Kumar Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/thermal/spear_thermal.c b/drivers/thermal/spear_thermal.c index 880bf28..be94413 100644 --- a/drivers/thermal/spear_thermal.c +++ b/drivers/thermal/spear_thermal.c @@ -46,7 +46,7 @@ static inline int thermal_get_temp(struct thermal_zone_device *thermal, * Data are ready to be read after 628 usec from POWERDOWN signal * (PDN) = 1 */ - *temp = (readl(stdev->thermal_base) & 0x7F) * MD_FACTOR; + *temp = (readl_relaxed(stdev->thermal_base) & 0x7F) * MD_FACTOR; return 0; } @@ -63,8 +63,8 @@ static int spear_thermal_suspend(struct device *dev) unsigned int actual_mask = 0; /* Disable SPEAr Thermal Sensor */ - actual_mask = readl(stdev->thermal_base); - writel(actual_mask & ~stdev->flags, stdev->thermal_base); + actual_mask = readl_relaxed(stdev->thermal_base); + writel_relaxed(actual_mask & ~stdev->flags, stdev->thermal_base); clk_disable(stdev->clk); dev_info(dev, "Suspended.\n"); @@ -87,8 +87,8 @@ static int spear_thermal_resume(struct device *dev) } /* Enable SPEAr Thermal Sensor */ - actual_mask = readl(stdev->thermal_base); - writel(actual_mask | stdev->flags, stdev->thermal_base); + actual_mask = readl_relaxed(stdev->thermal_base); + writel_relaxed(actual_mask | stdev->flags, stdev->thermal_base); dev_info(dev, "Resumed.\n"); @@ -145,7 +145,7 @@ static int spear_thermal_probe(struct platform_device *pdev) } stdev->flags = pdata->thermal_flags; - writel(stdev->flags, stdev->thermal_base); + writel_relaxed(stdev->flags, stdev->thermal_base); spear_thermal = thermal_zone_device_register("spear_thermal", 0, stdev, &ops, 0, 0, 0, 0); @@ -180,8 +180,8 @@ static int spear_thermal_exit(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); /* Disable SPEAr Thermal Sensor */ - actual_mask = readl(stdev->thermal_base); - writel(actual_mask & ~stdev->flags, stdev->thermal_base); + actual_mask = readl_relaxed(stdev->thermal_base); + writel_relaxed(actual_mask & ~stdev->flags, stdev->thermal_base); clk_disable(stdev->clk); clk_put(stdev->clk); -- cgit v0.10.2 From 03ee62f0b9919535a1be02f72fe8153255a7fda0 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 21 Mar 2012 12:55:04 -0700 Subject: thermal: spear13xx: checking for NULL instead of IS_ERR() thermal_zone_device_register() never returns NULL, on error it returns and ERR_PTR(). Signed-off-by: Dan Carpenter Reviewed-by: Viresh Kumar Reviewed-by: Vincenzo Frascino Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/thermal/spear_thermal.c b/drivers/thermal/spear_thermal.c index be94413..c2e32df 100644 --- a/drivers/thermal/spear_thermal.c +++ b/drivers/thermal/spear_thermal.c @@ -149,9 +149,9 @@ static int spear_thermal_probe(struct platform_device *pdev) spear_thermal = thermal_zone_device_register("spear_thermal", 0, stdev, &ops, 0, 0, 0, 0); - if (!spear_thermal) { + if (IS_ERR(spear_thermal)) { dev_err(&pdev->dev, "thermal zone device is NULL\n"); - ret = -EINVAL; + ret = PTR_ERR(spear_thermal); goto disable_clk; } -- cgit v0.10.2 From f1f0e2ac596f531c15b7b09ebeb8cfd011fffbd2 Mon Sep 17 00:00:00 2001 From: Amit Daniel Kachhap Date: Wed, 21 Mar 2012 16:40:01 +0530 Subject: thermal: Fix for setting the thermal zone mode to enable/disable Basically without this patch changing the mode of thermal zone is not possible as wrong string size is passed to strncmp. Signed-off-by: Amit Daniel Kachhap Acked-by: Jean Delvare Signed-off-by: Len Brown diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index fab970d..022bacb 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -150,9 +150,9 @@ mode_store(struct device *dev, struct device_attribute *attr, if (!tz->ops->set_mode) return -EPERM; - if (!strncmp(buf, "enabled", sizeof("enabled"))) + if (!strncmp(buf, "enabled", sizeof("enabled") - 1)) result = tz->ops->set_mode(tz, THERMAL_DEVICE_ENABLED); - else if (!strncmp(buf, "disabled", sizeof("disabled"))) + else if (!strncmp(buf, "disabled", sizeof("disabled") - 1)) result = tz->ops->set_mode(tz, THERMAL_DEVICE_DISABLED); else result = -EINVAL; -- cgit v0.10.2 From 6a6ea0acc9375571a13aa8c4e105a0807e1c16a4 Mon Sep 17 00:00:00 2001 From: Robert Lee Date: Wed, 21 Mar 2012 11:48:25 -0500 Subject: ARM: davinci: Fix for cpuidle consolidation changes The recent cpuidle consolidation changes erroneously omitted one critical line of code. Signed-off-by: Robert Lee Tested-by: Sekhar Nori Acked-by: Sekhar Nori Signed-off-by: Len Brown diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c index 93ae096..9107691 100644 --- a/arch/arm/mach-davinci/cpuidle.c +++ b/arch/arm/mach-davinci/cpuidle.c @@ -55,10 +55,11 @@ static int davinci_enter_idle(struct cpuidle_device *dev, #define DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN BIT(0) static struct cpuidle_driver davinci_idle_driver = { - .name = "cpuidle-davinci", - .owner = THIS_MODULE, - .states[0] = ARM_CPUIDLE_WFI_STATE, - .states[1] = { + .name = "cpuidle-davinci", + .owner = THIS_MODULE, + .en_core_tk_irqen = 1, + .states[0] = ARM_CPUIDLE_WFI_STATE, + .states[1] = { .enter = davinci_enter_idle, .exit_latency = 10, .target_residency = 100000, -- cgit v0.10.2 From 384fe875efdc99f367a58920acb89c63f7465479 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 14 Feb 2012 13:11:07 +0800 Subject: ACPICA: Update _REV return value to 5 _REV returns the supported ACPI revision level, which is now 5. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown diff --git a/drivers/acpi/acpica/acconfig.h b/drivers/acpi/acpica/acconfig.h index 1f30af6..3748f1a 100644 --- a/drivers/acpi/acpica/acconfig.h +++ b/drivers/acpi/acpica/acconfig.h @@ -93,7 +93,7 @@ /* Version of ACPI supported */ -#define ACPI_CA_SUPPORT_LEVEL 3 +#define ACPI_CA_SUPPORT_LEVEL 5 /* Maximum count for a semaphore object */ -- cgit v0.10.2 From 2feec47d4c5f80b05f1650f5a24865718978eea4 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 14 Feb 2012 15:00:53 +0800 Subject: ACPICA: ACPI 5: Support for new FADT SleepStatus, SleepControl registers Adds sleep and wake support for systems with these registers. One new file, hwxfsleep.c Signed-off-by: Bob Moore Signed-off-by: Len Brown diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile index 0ca208b..da55180 100644 --- a/drivers/acpi/acpica/Makefile +++ b/drivers/acpi/acpica/Makefile @@ -73,7 +73,8 @@ acpi-y += \ hwregs.o \ hwsleep.o \ hwvalid.o \ - hwxface.o + hwxface.o \ + hwxfsleep.o acpi-$(ACPI_FUTURE_USAGE) += hwtimer.o diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h index 677793e..087f710 100644 --- a/drivers/acpi/acpica/achware.h +++ b/drivers/acpi/acpica/achware.h @@ -81,6 +81,23 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value); acpi_status acpi_hw_clear_acpi_status(void); /* + * hwsleep - sleep/wake support + */ +void acpi_hw_execute_SST(u32 value); + +acpi_status acpi_hw_extended_sleep(u8 sleep_state); + +acpi_status acpi_hw_legacy_sleep(u8 sleep_state); + +acpi_status acpi_hw_extended_wake_prep(u8 sleep_state); + +acpi_status acpi_hw_extended_wake(u8 sleep_state); + +acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state); + +acpi_status acpi_hw_legacy_wake(u8 sleep_state); + +/* * hwvalid - Port I/O with validation */ acpi_status acpi_hw_read_port(acpi_io_address address, u32 *value, u32 width); diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c index 3c4a922..59a2a6b 100644 --- a/drivers/acpi/acpica/hwsleep.c +++ b/drivers/acpi/acpica/hwsleep.c @@ -1,7 +1,6 @@ - /****************************************************************************** * - * Name: hwsleep.c - ACPI Hardware Sleep/Wake Interface + * Name: hwsleep.c - ACPI Hardware Sleep/Wake Support Functions * *****************************************************************************/ @@ -44,212 +43,183 @@ #include #include "accommon.h" -#include "actables.h" #include #include #define _COMPONENT ACPI_HARDWARE ACPI_MODULE_NAME("hwsleep") +/* Local prototypes */ +static void acpi_hw_execute_GTS(u8 sleep_state); + +static void acpi_hw_execute_BFS(u8 sleep_state); + +static void acpi_hw_execute_WAK(u8 sleep_state); + +static unsigned int gts, bfs; +module_param(gts, uint, 0644); +module_param(bfs, uint, 0644); +MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend."); +MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".); + /******************************************************************************* * - * FUNCTION: acpi_set_firmware_waking_vector + * FUNCTION: acpi_hw_execute_GTS * - * PARAMETERS: physical_address - 32-bit physical address of ACPI real mode - * entry point. + * PARAMETERS: sleep_state - Sleep state that will be entered * - * RETURN: Status + * RETURN: None * - * DESCRIPTION: Sets the 32-bit firmware_waking_vector field of the FACS + * DESCRIPTION: Execute the optional _GTS method (Going To Sleep) * ******************************************************************************/ -acpi_status -acpi_set_firmware_waking_vector(u32 physical_address) -{ - ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector); - - /* - * According to the ACPI specification 2.0c and later, the 64-bit - * waking vector should be cleared and the 32-bit waking vector should - * be used, unless we want the wake-up code to be called by the BIOS in - * Protected Mode. Some systems (for example HP dv5-1004nr) are known - * to fail to resume if the 64-bit vector is used. - */ +static void acpi_hw_execute_GTS(u8 sleep_state) +{ + struct acpi_object_list arg_list; + union acpi_object arg; + acpi_status status; - /* Set the 32-bit vector */ + if (!gts) + return; - acpi_gbl_FACS->firmware_waking_vector = physical_address; + /* One argument, sleep_state */ - /* Clear the 64-bit vector if it exists */ + arg_list.count = 1; + arg_list.pointer = &arg; + arg.type = ACPI_TYPE_INTEGER; + arg.integer.value = sleep_state; - if ((acpi_gbl_FACS->length > 32) && (acpi_gbl_FACS->version >= 1)) { - acpi_gbl_FACS->xfirmware_waking_vector = 0; + status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + ACPI_EXCEPTION((AE_INFO, status, + "While executing method _GTS")); } - - return_ACPI_STATUS(AE_OK); } -ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector) - -#if ACPI_MACHINE_WIDTH == 64 /******************************************************************************* * - * FUNCTION: acpi_set_firmware_waking_vector64 + * FUNCTION: acpi_hw_execute_BFS * - * PARAMETERS: physical_address - 64-bit physical address of ACPI protected - * mode entry point. + * PARAMETERS: sleep_state - Which sleep state we just exited * - * RETURN: Status + * RETURN: None * - * DESCRIPTION: Sets the 64-bit X_firmware_waking_vector field of the FACS, if - * it exists in the table. This function is intended for use with - * 64-bit host operating systems. + * DESCRIPTION: Execute the optional _BFS method (Back From Sleep) * ******************************************************************************/ -acpi_status -acpi_set_firmware_waking_vector64(u64 physical_address) -{ - ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector64); - - /* Determine if the 64-bit vector actually exists */ +static void acpi_hw_execute_BFS(u8 sleep_state) +{ + struct acpi_object_list arg_list; + union acpi_object arg; + acpi_status status; - if ((acpi_gbl_FACS->length <= 32) || (acpi_gbl_FACS->version < 1)) { - return_ACPI_STATUS(AE_NOT_EXIST); - } + if (!bfs) + return; - /* Clear 32-bit vector, set the 64-bit X_ vector */ + /* One argument, sleep_state */ - acpi_gbl_FACS->firmware_waking_vector = 0; - acpi_gbl_FACS->xfirmware_waking_vector = physical_address; + arg_list.count = 1; + arg_list.pointer = &arg; + arg.type = ACPI_TYPE_INTEGER; + arg.integer.value = sleep_state; - return_ACPI_STATUS(AE_OK); + status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + ACPI_EXCEPTION((AE_INFO, status, + "While executing method _BFS")); + } } -ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector64) -#endif - /******************************************************************************* * - * FUNCTION: acpi_enter_sleep_state_prep + * FUNCTION: acpi_hw_execute_WAK * - * PARAMETERS: sleep_state - Which sleep state to enter + * PARAMETERS: sleep_state - Which sleep state we just exited * - * RETURN: Status + * RETURN: None * - * DESCRIPTION: Prepare to enter a system sleep state (see ACPI 2.0 spec p 231) - * This function must execute with interrupts enabled. - * We break sleeping into 2 stages so that OSPM can handle - * various OS-specific tasks between the two steps. + * DESCRIPTION: Execute the _WAK method (System Wake) * ******************************************************************************/ -acpi_status acpi_enter_sleep_state_prep(u8 sleep_state) + +static void acpi_hw_execute_WAK(u8 sleep_state) { - acpi_status status; struct acpi_object_list arg_list; union acpi_object arg; + acpi_status status; - ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_prep); - - /* _PSW methods could be run here to enable wake-on keyboard, LAN, etc. */ - - status = acpi_get_sleep_type_data(sleep_state, - &acpi_gbl_sleep_type_a, - &acpi_gbl_sleep_type_b); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Setup parameter object */ + /* One argument, sleep_state */ arg_list.count = 1; arg_list.pointer = &arg; - arg.type = ACPI_TYPE_INTEGER; arg.integer.value = sleep_state; - /* Run the _PTS method */ - - status = acpi_evaluate_object(NULL, METHOD_NAME__PTS, &arg_list, NULL); + status = acpi_evaluate_object(NULL, METHOD_NAME__WAK, &arg_list, NULL); if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - return_ACPI_STATUS(status); + ACPI_EXCEPTION((AE_INFO, status, + "While executing method _WAK")); } + /* TBD: _WAK "sometimes" returns stuff - do we want to look at it? */ +} - /* Setup the argument to _SST */ - - switch (sleep_state) { - case ACPI_STATE_S0: - arg.integer.value = ACPI_SST_WORKING; - break; +/******************************************************************************* + * + * FUNCTION: acpi_hw_execute_SST + * + * PARAMETERS: indicator_id - Value to be passed to the _SST method + * + * RETURN: None + * + * DESCRIPTION: Execute the optional _SST method (System Status) + * + ******************************************************************************/ - case ACPI_STATE_S1: - case ACPI_STATE_S2: - case ACPI_STATE_S3: - arg.integer.value = ACPI_SST_SLEEPING; - break; +void acpi_hw_execute_SST(u32 indicator_id) +{ + struct acpi_object_list arg_list; + union acpi_object arg; + acpi_status status; - case ACPI_STATE_S4: - arg.integer.value = ACPI_SST_SLEEP_CONTEXT; - break; + /* One argument, status indicator ID */ - default: - arg.integer.value = ACPI_SST_INDICATOR_OFF; /* Default is off */ - break; - } + arg_list.count = 1; + arg_list.pointer = &arg; + arg.type = ACPI_TYPE_INTEGER; - /* - * Set the system indicators to show the desired sleep state. - * _SST is an optional method (return no error if not found) - */ + arg.integer.value = indicator_id; status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL); if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { ACPI_EXCEPTION((AE_INFO, status, "While executing method _SST")); } - - return_ACPI_STATUS(AE_OK); } -ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep) - -static unsigned int gts, bfs; -module_param(gts, uint, 0644); -module_param(bfs, uint, 0644); -MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend."); -MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".); - /******************************************************************************* * - * FUNCTION: acpi_enter_sleep_state + * FUNCTION: acpi_hw_legacy_sleep * * PARAMETERS: sleep_state - Which sleep state to enter * * RETURN: Status * - * DESCRIPTION: Enter a system sleep state (see ACPI 2.0 spec p 231) + * DESCRIPTION: Enter a system sleep state via the legacy FADT PM registers * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED * ******************************************************************************/ -acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) + +acpi_status acpi_hw_legacy_sleep(u8 sleep_state) { - u32 pm1a_control; - u32 pm1b_control; struct acpi_bit_register_info *sleep_type_reg_info; struct acpi_bit_register_info *sleep_enable_reg_info; + u32 pm1a_control; + u32 pm1b_control; u32 in_value; - struct acpi_object_list arg_list; - union acpi_object arg; acpi_status status; - ACPI_FUNCTION_TRACE(acpi_enter_sleep_state); - - if ((acpi_gbl_sleep_type_a > ACPI_SLEEP_TYPE_MAX) || - (acpi_gbl_sleep_type_b > ACPI_SLEEP_TYPE_MAX)) { - ACPI_ERROR((AE_INFO, "Sleep values out of range: A=0x%X B=0x%X", - acpi_gbl_sleep_type_a, acpi_gbl_sleep_type_b)); - return_ACPI_STATUS(AE_AML_OPERAND_VALUE); - } + ACPI_FUNCTION_TRACE(hw_legacy_sleep); sleep_type_reg_info = acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_TYPE); @@ -271,6 +241,18 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) return_ACPI_STATUS(status); } + if (sleep_state != ACPI_STATE_S5) { + /* + * Disable BM arbitration. This feature is contained within an + * optional register (PM2 Control), so ignore a BAD_ADDRESS + * exception. + */ + status = acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1); + if (ACPI_FAILURE(status) && (status != AE_BAD_ADDRESS)) { + return_ACPI_STATUS(status); + } + } + /* * 1) Disable/Clear all GPEs * 2) Enable all wakeup GPEs @@ -286,19 +268,9 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) return_ACPI_STATUS(status); } - if (gts) { - /* Execute the _GTS method */ + /* Execute the _GTS method (Going To Sleep) */ - arg_list.count = 1; - arg_list.pointer = &arg; - arg.type = ACPI_TYPE_INTEGER; - arg.integer.value = sleep_state; - - status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - return_ACPI_STATUS(status); - } - } + acpi_hw_execute_GTS(sleep_state); /* Get current value of PM1A control */ @@ -375,114 +347,43 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) } } - /* Wait until we enter sleep state */ - - do { - status = acpi_read_bit_register(ACPI_BITREG_WAKE_STATUS, - &in_value); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Spin until we wake */ - - } while (!in_value); - - return_ACPI_STATUS(AE_OK); -} - -ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state) - -/******************************************************************************* - * - * FUNCTION: acpi_enter_sleep_state_s4bios - * - * PARAMETERS: None - * - * RETURN: Status - * - * DESCRIPTION: Perform a S4 bios request. - * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED - * - ******************************************************************************/ -acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void) -{ - u32 in_value; - acpi_status status; - - ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_s4bios); - - /* Clear the wake status bit (PM1) */ - - status = - acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, ACPI_CLEAR_STATUS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - status = acpi_hw_clear_acpi_status(); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* - * 1) Disable/Clear all GPEs - * 2) Enable all wakeup GPEs - */ - status = acpi_hw_disable_all_gpes(); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - acpi_gbl_system_awake_and_running = FALSE; - - status = acpi_hw_enable_all_wakeup_gpes(); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - ACPI_FLUSH_CPU_CACHE(); - - status = acpi_hw_write_port(acpi_gbl_FADT.smi_command, - (u32) acpi_gbl_FADT.S4bios_request, 8); + /* Wait for transition back to Working State */ do { - acpi_os_stall(1000); status = acpi_read_bit_register(ACPI_BITREG_WAKE_STATUS, &in_value); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } + } while (!in_value); return_ACPI_STATUS(AE_OK); } -ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios) - /******************************************************************************* * - * FUNCTION: acpi_leave_sleep_state_prep + * FUNCTION: acpi_hw_legacy_wake_prep * - * PARAMETERS: sleep_state - Which sleep state we are exiting + * PARAMETERS: sleep_state - Which sleep state we just exited * * RETURN: Status * * DESCRIPTION: Perform the first state of OS-independent ACPI cleanup after a * sleep. - * Called with interrupts DISABLED. + * Called with interrupts ENABLED. * ******************************************************************************/ -acpi_status acpi_leave_sleep_state_prep(u8 sleep_state) + +acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state) { - struct acpi_object_list arg_list; - union acpi_object arg; acpi_status status; struct acpi_bit_register_info *sleep_type_reg_info; struct acpi_bit_register_info *sleep_enable_reg_info; u32 pm1a_control; u32 pm1b_control; - ACPI_FUNCTION_TRACE(acpi_leave_sleep_state_prep); + ACPI_FUNCTION_TRACE(hw_legacy_wake_prep); /* * Set SLP_TYPE and SLP_EN to state S0. @@ -525,25 +426,13 @@ acpi_status acpi_leave_sleep_state_prep(u8 sleep_state) } } - if (bfs) { - /* Execute the _BFS method */ - - arg_list.count = 1; - arg_list.pointer = &arg; - arg.type = ACPI_TYPE_INTEGER; - arg.integer.value = sleep_state; - - status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS")); - } - } + acpi_hw_execute_BFS(sleep_state); return_ACPI_STATUS(status); } /******************************************************************************* * - * FUNCTION: acpi_leave_sleep_state + * FUNCTION: acpi_hw_legacy_wake * * PARAMETERS: sleep_state - Which sleep state we just exited * @@ -553,31 +442,17 @@ acpi_status acpi_leave_sleep_state_prep(u8 sleep_state) * Called with interrupts ENABLED. * ******************************************************************************/ -acpi_status acpi_leave_sleep_state(u8 sleep_state) + +acpi_status acpi_hw_legacy_wake(u8 sleep_state) { - struct acpi_object_list arg_list; - union acpi_object arg; acpi_status status; - ACPI_FUNCTION_TRACE(acpi_leave_sleep_state); + ACPI_FUNCTION_TRACE(hw_legacy_wake); /* Ensure enter_sleep_state_prep -> enter_sleep_state ordering */ acpi_gbl_sleep_type_a = ACPI_SLEEP_TYPE_INVALID; - - /* Setup parameter object */ - - arg_list.count = 1; - arg_list.pointer = &arg; - arg.type = ACPI_TYPE_INTEGER; - - /* Ignore any errors from these methods */ - - arg.integer.value = ACPI_SST_WAKING; - status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_EXCEPTION((AE_INFO, status, "During Method _SST")); - } + acpi_hw_execute_SST(ACPI_SST_WAKING); /* * GPEs must be enabled before _WAK is called as GPEs @@ -591,46 +466,201 @@ acpi_status acpi_leave_sleep_state(u8 sleep_state) if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } + status = acpi_hw_enable_all_runtime_gpes(); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } - arg.integer.value = sleep_state; - status = acpi_evaluate_object(NULL, METHOD_NAME__WAK, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_EXCEPTION((AE_INFO, status, "During Method _WAK")); - } - /* TBD: _WAK "sometimes" returns stuff - do we want to look at it? */ + /* + * Now we can execute _WAK, etc. Some machines require that the GPEs + * are enabled before the wake methods are executed. + */ + acpi_hw_execute_WAK(sleep_state); /* - * Some BIOSes assume that WAK_STS will be cleared on resume and use - * it to determine whether the system is rebooting or resuming. Clear - * it for compatibility. + * Some BIOS code assumes that WAK_STS will be cleared on resume + * and use it to determine whether the system is rebooting or + * resuming. Clear WAK_STS for compatibility. */ acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, 1); - acpi_gbl_system_awake_and_running = TRUE; /* Enable power button */ (void) acpi_write_bit_register(acpi_gbl_fixed_event_info - [ACPI_EVENT_POWER_BUTTON]. - enable_register_id, ACPI_ENABLE_EVENT); + [ACPI_EVENT_POWER_BUTTON]. + enable_register_id, ACPI_ENABLE_EVENT); (void) acpi_write_bit_register(acpi_gbl_fixed_event_info - [ACPI_EVENT_POWER_BUTTON]. - status_register_id, ACPI_CLEAR_STATUS); + [ACPI_EVENT_POWER_BUTTON]. + status_register_id, ACPI_CLEAR_STATUS); - arg.integer.value = ACPI_SST_WORKING; - status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_EXCEPTION((AE_INFO, status, "During Method _SST")); + /* + * Enable BM arbitration. This feature is contained within an + * optional register (PM2 Control), so ignore a BAD_ADDRESS + * exception. + */ + status = acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0); + if (ACPI_FAILURE(status) && (status != AE_BAD_ADDRESS)) { + return_ACPI_STATUS(status); } + acpi_hw_execute_SST(ACPI_SST_WORKING); return_ACPI_STATUS(status); } -ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state) + +/******************************************************************************* + * + * FUNCTION: acpi_hw_extended_sleep + * + * PARAMETERS: sleep_state - Which sleep state to enter + * + * RETURN: Status + * + * DESCRIPTION: Enter a system sleep state via the extended FADT sleep + * registers (V5 FADT). + * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED + * + ******************************************************************************/ + +acpi_status acpi_hw_extended_sleep(u8 sleep_state) +{ + acpi_status status; + u8 sleep_type_value; + u64 sleep_status; + + ACPI_FUNCTION_TRACE(hw_extended_sleep); + + /* Extended sleep registers must be valid */ + + if (!acpi_gbl_FADT.sleep_control.address || + !acpi_gbl_FADT.sleep_status.address) { + return_ACPI_STATUS(AE_NOT_EXIST); + } + + /* Clear wake status (WAK_STS) */ + + status = acpi_write(ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + acpi_gbl_system_awake_and_running = FALSE; + + /* Execute the _GTS method (Going To Sleep) */ + + acpi_hw_execute_GTS(sleep_state); + + /* Flush caches, as per ACPI specification */ + + ACPI_FLUSH_CPU_CACHE(); + + /* + * Set the SLP_TYP and SLP_EN bits. + * + * Note: We only use the first value returned by the \_Sx method + * (acpi_gbl_sleep_type_a) - As per ACPI specification. + */ + ACPI_DEBUG_PRINT((ACPI_DB_INIT, + "Entering sleep state [S%u]\n", sleep_state)); + + sleep_type_value = + ((acpi_gbl_sleep_type_a << ACPI_X_SLEEP_TYPE_POSITION) & + ACPI_X_SLEEP_TYPE_MASK); + + status = acpi_write((sleep_type_value | ACPI_X_SLEEP_ENABLE), + &acpi_gbl_FADT.sleep_control); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Wait for transition back to Working State */ + + do { + status = acpi_read(&sleep_status, &acpi_gbl_FADT.sleep_status); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + } while (!(((u8)sleep_status) & ACPI_X_WAKE_STATUS)); + + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_hw_extended_wake_prep + * + * PARAMETERS: sleep_state - Which sleep state we just exited + * + * RETURN: Status + * + * DESCRIPTION: Perform first part of OS-independent ACPI cleanup after + * a sleep. Called with interrupts ENABLED. + * + ******************************************************************************/ + +acpi_status acpi_hw_extended_wake_prep(u8 sleep_state) +{ + acpi_status status; + u8 sleep_type_value; + + ACPI_FUNCTION_TRACE(hw_extended_wake_prep); + + status = acpi_get_sleep_type_data(ACPI_STATE_S0, + &acpi_gbl_sleep_type_a, + &acpi_gbl_sleep_type_b); + if (ACPI_SUCCESS(status)) { + sleep_type_value = + ((acpi_gbl_sleep_type_a << ACPI_X_SLEEP_TYPE_POSITION) & + ACPI_X_SLEEP_TYPE_MASK); + + (void)acpi_write((sleep_type_value | ACPI_X_SLEEP_ENABLE), + &acpi_gbl_FADT.sleep_control); + } + + acpi_hw_execute_BFS(sleep_state); + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_hw_extended_wake + * + * PARAMETERS: sleep_state - Which sleep state we just exited + * + * RETURN: Status + * + * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep + * Called with interrupts ENABLED. + * + ******************************************************************************/ + +acpi_status acpi_hw_extended_wake(u8 sleep_state) +{ + ACPI_FUNCTION_TRACE(hw_extended_wake); + + /* Ensure enter_sleep_state_prep -> enter_sleep_state ordering */ + + acpi_gbl_sleep_type_a = ACPI_SLEEP_TYPE_INVALID; + + /* Execute the wake methods */ + + acpi_hw_execute_SST(ACPI_SST_WAKING); + acpi_hw_execute_WAK(sleep_state); + + /* + * Some BIOS code assumes that WAK_STS will be cleared on resume + * and use it to determine whether the system is rebooting or + * resuming. Clear WAK_STS for compatibility. + */ + (void)acpi_write(ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status); + acpi_gbl_system_awake_and_running = TRUE; + + acpi_hw_execute_SST(ACPI_SST_WORKING); + return_ACPI_STATUS(AE_OK); +} diff --git a/drivers/acpi/acpica/hwxfsleep.c b/drivers/acpi/acpica/hwxfsleep.c new file mode 100644 index 0000000..29c0fd3 --- /dev/null +++ b/drivers/acpi/acpica/hwxfsleep.c @@ -0,0 +1,377 @@ +/****************************************************************************** + * + * Name: hwxfsleep.c - ACPI Hardware Sleep/Wake External Interfaces + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2012, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include +#include "accommon.h" +#include + +#define _COMPONENT ACPI_HARDWARE +ACPI_MODULE_NAME("hwxfsleep") + +/******************************************************************************* + * + * FUNCTION: acpi_set_firmware_waking_vector + * + * PARAMETERS: physical_address - 32-bit physical address of ACPI real mode + * entry point. + * + * RETURN: Status + * + * DESCRIPTION: Sets the 32-bit firmware_waking_vector field of the FACS + * + ******************************************************************************/ +acpi_status acpi_set_firmware_waking_vector(u32 physical_address) +{ + ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector); + + + /* + * According to the ACPI specification 2.0c and later, the 64-bit + * waking vector should be cleared and the 32-bit waking vector should + * be used, unless we want the wake-up code to be called by the BIOS in + * Protected Mode. Some systems (for example HP dv5-1004nr) are known + * to fail to resume if the 64-bit vector is used. + */ + + /* Set the 32-bit vector */ + + acpi_gbl_FACS->firmware_waking_vector = physical_address; + + /* Clear the 64-bit vector if it exists */ + + if ((acpi_gbl_FACS->length > 32) && (acpi_gbl_FACS->version >= 1)) { + acpi_gbl_FACS->xfirmware_waking_vector = 0; + } + + return_ACPI_STATUS(AE_OK); +} + +ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector) + +#if ACPI_MACHINE_WIDTH == 64 +/******************************************************************************* + * + * FUNCTION: acpi_set_firmware_waking_vector64 + * + * PARAMETERS: physical_address - 64-bit physical address of ACPI protected + * mode entry point. + * + * RETURN: Status + * + * DESCRIPTION: Sets the 64-bit X_firmware_waking_vector field of the FACS, if + * it exists in the table. This function is intended for use with + * 64-bit host operating systems. + * + ******************************************************************************/ +acpi_status acpi_set_firmware_waking_vector64(u64 physical_address) +{ + ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector64); + + + /* Determine if the 64-bit vector actually exists */ + + if ((acpi_gbl_FACS->length <= 32) || (acpi_gbl_FACS->version < 1)) { + return_ACPI_STATUS(AE_NOT_EXIST); + } + + /* Clear 32-bit vector, set the 64-bit X_ vector */ + + acpi_gbl_FACS->firmware_waking_vector = 0; + acpi_gbl_FACS->xfirmware_waking_vector = physical_address; + return_ACPI_STATUS(AE_OK); +} + +ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector64) +#endif + +/******************************************************************************* + * + * FUNCTION: acpi_enter_sleep_state_s4bios + * + * PARAMETERS: None + * + * RETURN: Status + * + * DESCRIPTION: Perform a S4 bios request. + * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED + * + ******************************************************************************/ +acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void) +{ + u32 in_value; + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_s4bios); + + /* Clear the wake status bit (PM1) */ + + status = + acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, ACPI_CLEAR_STATUS); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + status = acpi_hw_clear_acpi_status(); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* + * 1) Disable/Clear all GPEs + * 2) Enable all wakeup GPEs + */ + status = acpi_hw_disable_all_gpes(); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + acpi_gbl_system_awake_and_running = FALSE; + + status = acpi_hw_enable_all_wakeup_gpes(); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + ACPI_FLUSH_CPU_CACHE(); + + status = acpi_hw_write_port(acpi_gbl_FADT.smi_command, + (u32)acpi_gbl_FADT.S4bios_request, 8); + + do { + acpi_os_stall(1000); + status = + acpi_read_bit_register(ACPI_BITREG_WAKE_STATUS, &in_value); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + } while (!in_value); + + return_ACPI_STATUS(AE_OK); +} + +ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios) + +/******************************************************************************* + * + * FUNCTION: acpi_enter_sleep_state_prep + * + * PARAMETERS: sleep_state - Which sleep state to enter + * + * RETURN: Status + * + * DESCRIPTION: Prepare to enter a system sleep state (see ACPI 2.0 spec p 231) + * This function must execute with interrupts enabled. + * We break sleeping into 2 stages so that OSPM can handle + * various OS-specific tasks between the two steps. + * + ******************************************************************************/ +acpi_status acpi_enter_sleep_state_prep(u8 sleep_state) +{ + acpi_status status; + struct acpi_object_list arg_list; + union acpi_object arg; + u32 sst_value; + + ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_prep); + + /* _PSW methods could be run here to enable wake-on keyboard, LAN, etc. */ + + status = acpi_get_sleep_type_data(sleep_state, + &acpi_gbl_sleep_type_a, + &acpi_gbl_sleep_type_b); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Execute the _PTS method (Prepare To Sleep) */ + + arg_list.count = 1; + arg_list.pointer = &arg; + arg.type = ACPI_TYPE_INTEGER; + arg.integer.value = sleep_state; + + status = acpi_evaluate_object(NULL, METHOD_NAME__PTS, &arg_list, NULL); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + return_ACPI_STATUS(status); + } + + /* Setup the argument to the _SST method (System STatus) */ + + switch (sleep_state) { + case ACPI_STATE_S0: + sst_value = ACPI_SST_WORKING; + break; + + case ACPI_STATE_S1: + case ACPI_STATE_S2: + case ACPI_STATE_S3: + sst_value = ACPI_SST_SLEEPING; + break; + + case ACPI_STATE_S4: + sst_value = ACPI_SST_SLEEP_CONTEXT; + break; + + default: + sst_value = ACPI_SST_INDICATOR_OFF; /* Default is off */ + break; + } + + /* + * Set the system indicators to show the desired sleep state. + * _SST is an optional method (return no error if not found) + */ + acpi_hw_execute_SST(sst_value); + return_ACPI_STATUS(AE_OK); +} + +ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep) + +/******************************************************************************* + * + * FUNCTION: acpi_enter_sleep_state + * + * PARAMETERS: sleep_state - Which sleep state to enter + * + * RETURN: Status + * + * DESCRIPTION: Enter a system sleep state (see ACPI 2.0 spec p 231) + * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED + * + ******************************************************************************/ +acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_enter_sleep_state); + + if ((acpi_gbl_sleep_type_a > ACPI_SLEEP_TYPE_MAX) || + (acpi_gbl_sleep_type_b > ACPI_SLEEP_TYPE_MAX)) { + ACPI_ERROR((AE_INFO, "Sleep values out of range: A=0x%X B=0x%X", + acpi_gbl_sleep_type_a, acpi_gbl_sleep_type_b)); + return_ACPI_STATUS(AE_AML_OPERAND_VALUE); + } + + /* If Hardware Reduced flag is set, must use the extended sleep registers */ + + if (acpi_gbl_reduced_hardware || acpi_gbl_FADT.sleep_control.address) { + status = acpi_hw_extended_sleep(sleep_state); + } else { + /* Legacy sleep */ + + status = acpi_hw_legacy_sleep(sleep_state); + } + + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state) + +/******************************************************************************* + * + * FUNCTION: acpi_leave_sleep_state_prep + * + * PARAMETERS: sleep_state - Which sleep state we are exiting + * + * RETURN: Status + * + * DESCRIPTION: Perform the first state of OS-independent ACPI cleanup after a + * sleep. + * Called with interrupts DISABLED. + * + ******************************************************************************/ +acpi_status acpi_leave_sleep_state_prep(u8 sleep_state) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_leave_sleep_state); + + + /* If Hardware Reduced flag is set, must use the extended sleep registers */ + + if (acpi_gbl_reduced_hardware || acpi_gbl_FADT.sleep_control.address) { + status = acpi_hw_extended_wake_prep(sleep_state); + } else { + /* Legacy sleep */ + + status = acpi_hw_legacy_wake_prep(sleep_state); + } + + + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state_prep) + +/******************************************************************************* + * + * FUNCTION: acpi_leave_sleep_state + * + * PARAMETERS: sleep_state - Which sleep state we just exited + * + * RETURN: Status + * + * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep + * Called with interrupts ENABLED. + * + ******************************************************************************/ +acpi_status acpi_leave_sleep_state(u8 sleep_state) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_leave_sleep_state); + + + /* If Hardware Reduced flag is set, must use the extended sleep registers */ + + if (acpi_gbl_reduced_hardware || acpi_gbl_FADT.sleep_control.address) { + status = acpi_hw_extended_wake(sleep_state); + } else { + /* Legacy sleep */ + + status = acpi_hw_legacy_wake(sleep_state); + } + + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state) diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h index 8e1b92f..8dea546 100644 --- a/include/acpi/actbl.h +++ b/include/acpi/actbl.h @@ -309,6 +309,13 @@ enum acpi_prefered_pm_profiles { PM_TABLET = 8 }; +/* Values for sleep_status and sleep_control registers (V5 FADT) */ + +#define ACPI_X_WAKE_STATUS 0x80 +#define ACPI_X_SLEEP_TYPE_MASK 0x1C +#define ACPI_X_SLEEP_TYPE_POSITION 0x02 +#define ACPI_X_SLEEP_ENABLE 0x20 + /* Reset to default packing */ #pragma pack() -- cgit v0.10.2 From d08310fe0d6bd8c82da94e8d8ef48bdbe14d2bd1 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 14 Feb 2012 15:22:51 +0800 Subject: ACPICA: Move ACPI timer prototypes to public acpixf file These prototypes were incorrectly declared in achware.h. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h index 087f710..eed204a 100644 --- a/drivers/acpi/acpica/achware.h +++ b/drivers/acpi/acpica/achware.h @@ -145,16 +145,4 @@ acpi_status acpi_hw_derive_pci_id(struct acpi_pci_id *pci_id, acpi_handle root_pci_device, acpi_handle pci_region); -#ifdef ACPI_FUTURE_USAGE -/* - * hwtimer - ACPI Timer prototypes - */ -acpi_status acpi_get_timer_resolution(u32 * resolution); - -acpi_status acpi_get_timer(u32 * ticks); - -acpi_status -acpi_get_timer_duration(u32 start_ticks, u32 end_ticks, u32 * time_elapsed); -#endif /* ACPI_FUTURE_USAGE */ - #endif /* __ACHWARE_H__ */ diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index a28da35..67cd51c 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -419,6 +419,18 @@ acpi_status acpi_leave_sleep_state_prep(u8 sleep_state); acpi_status acpi_leave_sleep_state(u8 sleep_state); /* + * ACPI Timer interfaces + */ +#ifdef ACPI_FUTURE_USAGE +acpi_status acpi_get_timer_resolution(u32 *resolution); + +acpi_status acpi_get_timer(u32 *ticks); + +acpi_status +acpi_get_timer_duration(u32 start_ticks, u32 end_ticks, u32 *time_elapsed); +#endif /* ACPI_FUTURE_USAGE */ + +/* * Error/Warning output */ void ACPI_INTERNAL_VAR_XFACE -- cgit v0.10.2 From 33620c5419e8a11814dd11e02a80e6ef77a43407 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 14 Feb 2012 18:14:27 +0800 Subject: ACPICA: Support for custom ACPICA build for ACPI 5 reduced hardware Add ACPI_REDUCED_HARDWARE flag that removes all hardware-related code (about 10% code, 5% static data). Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown diff --git a/drivers/acpi/acpica/accommon.h b/drivers/acpi/acpica/accommon.h index a44bd42..8a7d51b 100644 --- a/drivers/acpi/acpica/accommon.h +++ b/drivers/acpi/acpica/accommon.h @@ -51,7 +51,6 @@ * * Note: The order of these include files is important. */ -#include "acconfig.h" /* Global configuration constants */ #include "acmacros.h" /* C macros */ #include "aclocal.h" /* Internal data types */ #include "acobject.h" /* ACPI internal object */ diff --git a/drivers/acpi/acpica/acconfig.h b/drivers/acpi/acpica/acconfig.h deleted file mode 100644 index 3748f1a..0000000 --- a/drivers/acpi/acpica/acconfig.h +++ /dev/null @@ -1,231 +0,0 @@ -/****************************************************************************** - * - * Name: acconfig.h - Global configuration constants - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2012, Intel Corp. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -#ifndef _ACCONFIG_H -#define _ACCONFIG_H - -/****************************************************************************** - * - * Configuration options - * - *****************************************************************************/ - -/* - * ACPI_DEBUG_OUTPUT - This switch enables all the debug facilities of the - * ACPI subsystem. This includes the DEBUG_PRINT output - * statements. When disabled, all DEBUG_PRINT - * statements are compiled out. - * - * ACPI_APPLICATION - Use this switch if the subsystem is going to be run - * at the application level. - * - */ - -/* - * OS name, used for the _OS object. The _OS object is essentially obsolete, - * but there is a large base of ASL/AML code in existing machines that check - * for the string below. The use of this string usually guarantees that - * the ASL will execute down the most tested code path. Also, there is some - * code that will not execute the _OSI method unless _OS matches the string - * below. Therefore, change this string at your own risk. - */ -#define ACPI_OS_NAME "Microsoft Windows NT" - -/* Maximum objects in the various object caches */ - -#define ACPI_MAX_STATE_CACHE_DEPTH 96 /* State objects */ -#define ACPI_MAX_PARSE_CACHE_DEPTH 96 /* Parse tree objects */ -#define ACPI_MAX_EXTPARSE_CACHE_DEPTH 96 /* Parse tree objects */ -#define ACPI_MAX_OBJECT_CACHE_DEPTH 96 /* Interpreter operand objects */ -#define ACPI_MAX_NAMESPACE_CACHE_DEPTH 96 /* Namespace objects */ - -/* - * Should the subsystem abort the loading of an ACPI table if the - * table checksum is incorrect? - */ -#define ACPI_CHECKSUM_ABORT FALSE - -/****************************************************************************** - * - * Subsystem Constants - * - *****************************************************************************/ - -/* Version of ACPI supported */ - -#define ACPI_CA_SUPPORT_LEVEL 5 - -/* Maximum count for a semaphore object */ - -#define ACPI_MAX_SEMAPHORE_COUNT 256 - -/* Maximum object reference count (detects object deletion issues) */ - -#define ACPI_MAX_REFERENCE_COUNT 0x1000 - -/* Default page size for use in mapping memory for operation regions */ - -#define ACPI_DEFAULT_PAGE_SIZE 4096 /* Must be power of 2 */ - -/* owner_id tracking. 8 entries allows for 255 owner_ids */ - -#define ACPI_NUM_OWNERID_MASKS 8 - -/* Size of the root table array is increased by this increment */ - -#define ACPI_ROOT_TABLE_SIZE_INCREMENT 4 - -/* Maximum number of While() loop iterations before forced abort */ - -#define ACPI_MAX_LOOP_ITERATIONS 0xFFFF - -/* Maximum sleep allowed via Sleep() operator */ - -#define ACPI_MAX_SLEEP 2000 /* Two seconds */ - -/* Address Range lists are per-space_id (Memory and I/O only) */ - -#define ACPI_ADDRESS_RANGE_MAX 2 - -/****************************************************************************** - * - * ACPI Specification constants (Do not change unless the specification changes) - * - *****************************************************************************/ - -/* Number of distinct GPE register blocks and register width */ - -#define ACPI_MAX_GPE_BLOCKS 2 -#define ACPI_GPE_REGISTER_WIDTH 8 - -/* Method info (in WALK_STATE), containing local variables and argumetns */ - -#define ACPI_METHOD_NUM_LOCALS 8 -#define ACPI_METHOD_MAX_LOCAL 7 - -#define ACPI_METHOD_NUM_ARGS 7 -#define ACPI_METHOD_MAX_ARG 6 - -/* Length of _HID, _UID, _CID, and UUID values */ - -#define ACPI_DEVICE_ID_LENGTH 0x09 -#define ACPI_MAX_CID_LENGTH 48 -#define ACPI_UUID_LENGTH 16 - -/* - * Operand Stack (in WALK_STATE), Must be large enough to contain METHOD_MAX_ARG - */ -#define ACPI_OBJ_NUM_OPERANDS 8 -#define ACPI_OBJ_MAX_OPERAND 7 - -/* Number of elements in the Result Stack frame, can be an arbitrary value */ - -#define ACPI_RESULTS_FRAME_OBJ_NUM 8 - -/* - * Maximal number of elements the Result Stack can contain, - * it may be an arbitray value not exceeding the types of - * result_size and result_count (now u8). - */ -#define ACPI_RESULTS_OBJ_NUM_MAX 255 - -/* Names within the namespace are 4 bytes long */ - -#define ACPI_NAME_SIZE 4 -#define ACPI_PATH_SEGMENT_LENGTH 5 /* 4 chars for name + 1 char for separator */ -#define ACPI_PATH_SEPARATOR '.' - -/* Sizes for ACPI table headers */ - -#define ACPI_OEM_ID_SIZE 6 -#define ACPI_OEM_TABLE_ID_SIZE 8 - -/* Constants used in searching for the RSDP in low memory */ - -#define ACPI_EBDA_PTR_LOCATION 0x0000040E /* Physical Address */ -#define ACPI_EBDA_PTR_LENGTH 2 -#define ACPI_EBDA_WINDOW_SIZE 1024 -#define ACPI_HI_RSDP_WINDOW_BASE 0x000E0000 /* Physical Address */ -#define ACPI_HI_RSDP_WINDOW_SIZE 0x00020000 -#define ACPI_RSDP_SCAN_STEP 16 - -/* Operation regions */ - -#define ACPI_USER_REGION_BEGIN 0x80 - -/* Maximum space_ids for Operation Regions */ - -#define ACPI_MAX_ADDRESS_SPACE 255 - -/* Array sizes. Used for range checking also */ - -#define ACPI_MAX_MATCH_OPCODE 5 - -/* RSDP checksums */ - -#define ACPI_RSDP_CHECKSUM_LENGTH 20 -#define ACPI_RSDP_XCHECKSUM_LENGTH 36 - -/* SMBus, GSBus and IPMI bidirectional buffer size */ - -#define ACPI_SMBUS_BUFFER_SIZE 34 -#define ACPI_GSBUS_BUFFER_SIZE 34 -#define ACPI_IPMI_BUFFER_SIZE 66 - -/* _sx_d and _sx_w control methods */ - -#define ACPI_NUM_sx_d_METHODS 4 -#define ACPI_NUM_sx_w_METHODS 5 - -/****************************************************************************** - * - * ACPI AML Debugger - * - *****************************************************************************/ - -#define ACPI_DEBUGGER_MAX_ARGS 8 /* Must be max method args + 1 */ - -#define ACPI_DEBUGGER_COMMAND_PROMPT '-' -#define ACPI_DEBUGGER_EXECUTE_PROMPT '%' - -#endif /* _ACCONFIG_H */ diff --git a/drivers/acpi/acpica/acdebug.h b/drivers/acpi/acpica/acdebug.h index deaa819..5e8abb0 100644 --- a/drivers/acpi/acpica/acdebug.h +++ b/drivers/acpi/acpica/acdebug.h @@ -111,7 +111,7 @@ acpi_status acpi_db_find_name_in_namespace(char *name_arg); void acpi_db_set_scope(char *name); -acpi_status acpi_db_sleep(char *object_arg); +ACPI_HW_DEPENDENT_RETURN_OK(acpi_status acpi_db_sleep(char *object_arg)) void acpi_db_find_references(char *object_arg); @@ -119,11 +119,13 @@ void acpi_db_display_locks(void); void acpi_db_display_resources(char *object_arg); -void acpi_db_display_gpes(void); +ACPI_HW_DEPENDENT_RETURN_VOID(void acpi_db_display_gpes(void)) void acpi_db_check_integrity(void); -void acpi_db_generate_gpe(char *gpe_arg, char *block_arg); +ACPI_HW_DEPENDENT_RETURN_VOID(void + acpi_db_generate_gpe(char *gpe_arg, + char *block_arg)) void acpi_db_check_predefined_names(void); diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h index c53caa5..d700f63 100644 --- a/drivers/acpi/acpica/acevents.h +++ b/drivers/acpi/acpica/acevents.h @@ -69,11 +69,10 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node *node, */ acpi_status acpi_ev_init_global_lock_handler(void); -acpi_status acpi_ev_acquire_global_lock(u16 timeout); - -acpi_status acpi_ev_release_global_lock(void); - -acpi_status acpi_ev_remove_global_lock_handler(void); +ACPI_HW_DEPENDENT_RETURN_OK(acpi_status + acpi_ev_acquire_global_lock(u16 timeout)) + ACPI_HW_DEPENDENT_RETURN_OK(acpi_status acpi_ev_release_global_lock(void)) + acpi_status acpi_ev_remove_global_lock_handler(void); /* * evgpe - Low-level GPE support @@ -114,7 +113,9 @@ acpi_ev_initialize_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, struct acpi_gpe_block_info *gpe_block, void *context); -acpi_status acpi_ev_delete_gpe_block(struct acpi_gpe_block_info *gpe_block); +ACPI_HW_DEPENDENT_RETURN_OK(acpi_status + acpi_ev_delete_gpe_block(struct acpi_gpe_block_info + *gpe_block)) u32 acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device, @@ -126,9 +127,10 @@ acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device, */ acpi_status acpi_ev_gpe_initialize(void); -void acpi_ev_update_gpes(acpi_owner_id table_owner_id); +ACPI_HW_DEPENDENT_RETURN_VOID(void + acpi_ev_update_gpes(acpi_owner_id table_owner_id)) -acpi_status + acpi_status acpi_ev_match_gpe_method(acpi_handle obj_handle, u32 level, void *context, void **return_value); @@ -237,6 +239,5 @@ acpi_status acpi_ev_remove_sci_handler(void); u32 acpi_ev_initialize_sCI(u32 program_sCI); -void acpi_ev_terminate(void); - +ACPI_HW_DEPENDENT_RETURN_VOID(void acpi_ev_terminate(void)) #endif /* __ACEVENTS_H__ */ diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h index 2853f76..4f7d3f5 100644 --- a/drivers/acpi/acpica/acglobal.h +++ b/drivers/acpi/acpica/acglobal.h @@ -147,7 +147,7 @@ u8 acpi_gbl_system_awake_and_running; */ u8 acpi_gbl_reduced_hardware; -#endif +#endif /* DEFINE_ACPI_GLOBALS */ /* Do not disassemble buffers to resource descriptors */ @@ -184,8 +184,12 @@ ACPI_EXTERN u32 acpi_gbl_trace_dbg_layer; * found in the RSDT/XSDT. */ ACPI_EXTERN struct acpi_table_list acpi_gbl_root_table_list; + +#if (!ACPI_REDUCED_HARDWARE) ACPI_EXTERN struct acpi_table_facs *acpi_gbl_FACS; +#endif /* !ACPI_REDUCED_HARDWARE */ + /* These addresses are calculated from the FADT Event Block addresses */ ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1a_status; @@ -397,10 +401,15 @@ ACPI_EXTERN struct acpi_fixed_event_handler ACPI_EXTERN struct acpi_gpe_xrupt_info *acpi_gbl_gpe_xrupt_list_head; ACPI_EXTERN struct acpi_gpe_block_info *acpi_gbl_gpe_fadt_blocks[ACPI_MAX_GPE_BLOCKS]; + +#if (!ACPI_REDUCED_HARDWARE) + ACPI_EXTERN u8 acpi_gbl_all_gpes_initialized; ACPI_EXTERN ACPI_GBL_EVENT_HANDLER acpi_gbl_global_event_handler; ACPI_EXTERN void *acpi_gbl_global_event_handler_context; +#endif /* !ACPI_REDUCED_HARDWARE */ + /***************************************************************************** * * Debugger globals diff --git a/drivers/acpi/acpica/evevent.c b/drivers/acpi/acpica/evevent.c index 6729ebe..07e4dc4 100644 --- a/drivers/acpi/acpica/evevent.c +++ b/drivers/acpi/acpica/evevent.c @@ -47,7 +47,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evevent") - +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /* Local prototypes */ static acpi_status acpi_ev_fixed_event_initialize(void); @@ -291,3 +291,5 @@ static u32 acpi_ev_fixed_event_dispatch(u32 event) return ((acpi_gbl_fixed_event_handlers[event]. handler) (acpi_gbl_fixed_event_handlers[event].context)); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evglock.c b/drivers/acpi/acpica/evglock.c index 5e5683c..cfeab38 100644 --- a/drivers/acpi/acpica/evglock.c +++ b/drivers/acpi/acpica/evglock.c @@ -48,7 +48,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evglock") - +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /* Local prototypes */ static u32 acpi_ev_global_lock_handler(void *context); @@ -339,3 +339,5 @@ acpi_status acpi_ev_release_global_lock(void) acpi_os_release_mutex(acpi_gbl_global_lock_mutex->mutex.os_mutex); return_ACPI_STATUS(status); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c index 9e88cb6..8ba0e5f 100644 --- a/drivers/acpi/acpica/evgpe.c +++ b/drivers/acpi/acpica/evgpe.c @@ -48,7 +48,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evgpe") - +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /* Local prototypes */ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context); @@ -766,3 +766,5 @@ acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device, return_UINT32(ACPI_INTERRUPT_HANDLED); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c index be75339..23a3ca8 100644 --- a/drivers/acpi/acpica/evgpeblk.c +++ b/drivers/acpi/acpica/evgpeblk.c @@ -48,7 +48,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evgpeblk") - +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /* Local prototypes */ static acpi_status acpi_ev_install_gpe_block(struct acpi_gpe_block_info *gpe_block, @@ -504,3 +504,5 @@ acpi_ev_initialize_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, return_ACPI_STATUS(AE_OK); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evgpeinit.c b/drivers/acpi/acpica/evgpeinit.c index adf7494..da0add8 100644 --- a/drivers/acpi/acpica/evgpeinit.c +++ b/drivers/acpi/acpica/evgpeinit.c @@ -48,7 +48,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evgpeinit") - +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /* * Note: History of _PRW support in ACPICA * @@ -440,3 +440,5 @@ acpi_ev_match_gpe_method(acpi_handle obj_handle, name, gpe_number)); return_ACPI_STATUS(AE_OK); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evgpeutil.c b/drivers/acpi/acpica/evgpeutil.c index 2507393..3c43796 100644 --- a/drivers/acpi/acpica/evgpeutil.c +++ b/drivers/acpi/acpica/evgpeutil.c @@ -48,6 +48,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evgpeutil") +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /******************************************************************************* * * FUNCTION: acpi_ev_walk_gpe_list @@ -374,3 +375,5 @@ acpi_ev_delete_gpe_handlers(struct acpi_gpe_xrupt_info *gpe_xrupt_info, return_ACPI_STATUS(AE_OK); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evmisc.c b/drivers/acpi/acpica/evmisc.c index 84966f4..0912f62 100644 --- a/drivers/acpi/acpica/evmisc.c +++ b/drivers/acpi/acpica/evmisc.c @@ -270,6 +270,7 @@ static void ACPI_SYSTEM_XFACE acpi_ev_notify_dispatch(void *context) acpi_ut_delete_generic_state(notify_info); } +#if (!ACPI_REDUCED_HARDWARE) /****************************************************************************** * * FUNCTION: acpi_ev_terminate @@ -338,3 +339,5 @@ void acpi_ev_terminate(void) } return_VOID; } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evsci.c b/drivers/acpi/acpica/evsci.c index 26065c6..6a57aa2 100644 --- a/drivers/acpi/acpica/evsci.c +++ b/drivers/acpi/acpica/evsci.c @@ -48,7 +48,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evsci") - +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /* Local prototypes */ static u32 ACPI_SYSTEM_XFACE acpi_ev_sci_xrupt_handler(void *context); @@ -181,3 +181,5 @@ acpi_status acpi_ev_remove_sci_handler(void) return_ACPI_STATUS(status); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c index 61944e8..44bef57 100644 --- a/drivers/acpi/acpica/evxface.c +++ b/drivers/acpi/acpica/evxface.c @@ -51,222 +51,6 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evxface") -/******************************************************************************* - * - * FUNCTION: acpi_install_exception_handler - * - * PARAMETERS: Handler - Pointer to the handler function for the - * event - * - * RETURN: Status - * - * DESCRIPTION: Saves the pointer to the handler function - * - ******************************************************************************/ -#ifdef ACPI_FUTURE_USAGE -acpi_status acpi_install_exception_handler(acpi_exception_handler handler) -{ - acpi_status status; - - ACPI_FUNCTION_TRACE(acpi_install_exception_handler); - - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Don't allow two handlers. */ - - if (acpi_gbl_exception_handler) { - status = AE_ALREADY_EXISTS; - goto cleanup; - } - - /* Install the handler */ - - acpi_gbl_exception_handler = handler; - - cleanup: - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - return_ACPI_STATUS(status); -} - -ACPI_EXPORT_SYMBOL(acpi_install_exception_handler) -#endif /* ACPI_FUTURE_USAGE */ - -/******************************************************************************* - * - * FUNCTION: acpi_install_global_event_handler - * - * PARAMETERS: Handler - Pointer to the global event handler function - * Context - Value passed to the handler on each event - * - * RETURN: Status - * - * DESCRIPTION: Saves the pointer to the handler function. The global handler - * is invoked upon each incoming GPE and Fixed Event. It is - * invoked at interrupt level at the time of the event dispatch. - * Can be used to update event counters, etc. - * - ******************************************************************************/ -acpi_status -acpi_install_global_event_handler(ACPI_GBL_EVENT_HANDLER handler, void *context) -{ - acpi_status status; - - ACPI_FUNCTION_TRACE(acpi_install_global_event_handler); - - /* Parameter validation */ - - if (!handler) { - return_ACPI_STATUS(AE_BAD_PARAMETER); - } - - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Don't allow two handlers. */ - - if (acpi_gbl_global_event_handler) { - status = AE_ALREADY_EXISTS; - goto cleanup; - } - - acpi_gbl_global_event_handler = handler; - acpi_gbl_global_event_handler_context = context; - - cleanup: - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - return_ACPI_STATUS(status); -} - -ACPI_EXPORT_SYMBOL(acpi_install_global_event_handler) - -/******************************************************************************* - * - * FUNCTION: acpi_install_fixed_event_handler - * - * PARAMETERS: Event - Event type to enable. - * Handler - Pointer to the handler function for the - * event - * Context - Value passed to the handler on each GPE - * - * RETURN: Status - * - * DESCRIPTION: Saves the pointer to the handler function and then enables the - * event. - * - ******************************************************************************/ -acpi_status -acpi_install_fixed_event_handler(u32 event, - acpi_event_handler handler, void *context) -{ - acpi_status status; - - ACPI_FUNCTION_TRACE(acpi_install_fixed_event_handler); - - /* Parameter validation */ - - if (event > ACPI_EVENT_MAX) { - return_ACPI_STATUS(AE_BAD_PARAMETER); - } - - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Don't allow two handlers. */ - - if (NULL != acpi_gbl_fixed_event_handlers[event].handler) { - status = AE_ALREADY_EXISTS; - goto cleanup; - } - - /* Install the handler before enabling the event */ - - acpi_gbl_fixed_event_handlers[event].handler = handler; - acpi_gbl_fixed_event_handlers[event].context = context; - - status = acpi_clear_event(event); - if (ACPI_SUCCESS(status)) - status = acpi_enable_event(event, 0); - if (ACPI_FAILURE(status)) { - ACPI_WARNING((AE_INFO, "Could not enable fixed event 0x%X", - event)); - - /* Remove the handler */ - - acpi_gbl_fixed_event_handlers[event].handler = NULL; - acpi_gbl_fixed_event_handlers[event].context = NULL; - } else { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Enabled fixed event %X, Handler=%p\n", event, - handler)); - } - - cleanup: - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - return_ACPI_STATUS(status); -} - -ACPI_EXPORT_SYMBOL(acpi_install_fixed_event_handler) - -/******************************************************************************* - * - * FUNCTION: acpi_remove_fixed_event_handler - * - * PARAMETERS: Event - Event type to disable. - * Handler - Address of the handler - * - * RETURN: Status - * - * DESCRIPTION: Disables the event and unregisters the event handler. - * - ******************************************************************************/ -acpi_status -acpi_remove_fixed_event_handler(u32 event, acpi_event_handler handler) -{ - acpi_status status = AE_OK; - - ACPI_FUNCTION_TRACE(acpi_remove_fixed_event_handler); - - /* Parameter validation */ - - if (event > ACPI_EVENT_MAX) { - return_ACPI_STATUS(AE_BAD_PARAMETER); - } - - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Disable the event before removing the handler */ - - status = acpi_disable_event(event, 0); - - /* Always Remove the handler */ - - acpi_gbl_fixed_event_handlers[event].handler = NULL; - acpi_gbl_fixed_event_handlers[event].context = NULL; - - if (ACPI_FAILURE(status)) { - ACPI_WARNING((AE_INFO, - "Could not write to fixed event enable register 0x%X", - event)); - } else { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Disabled fixed event %X\n", - event)); - } - - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - return_ACPI_STATUS(status); -} - -ACPI_EXPORT_SYMBOL(acpi_remove_fixed_event_handler) /******************************************************************************* * @@ -334,6 +118,7 @@ acpi_add_handler_object(struct acpi_object_notify_handler *parent_obj, return AE_OK; } + /******************************************************************************* * * FUNCTION: acpi_install_notify_handler @@ -705,6 +490,224 @@ ACPI_EXPORT_SYMBOL(acpi_remove_notify_handler) /******************************************************************************* * + * FUNCTION: acpi_install_exception_handler + * + * PARAMETERS: Handler - Pointer to the handler function for the + * event + * + * RETURN: Status + * + * DESCRIPTION: Saves the pointer to the handler function + * + ******************************************************************************/ +#ifdef ACPI_FUTURE_USAGE +acpi_status acpi_install_exception_handler(acpi_exception_handler handler) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_install_exception_handler); + + status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Don't allow two handlers. */ + + if (acpi_gbl_exception_handler) { + status = AE_ALREADY_EXISTS; + goto cleanup; + } + + /* Install the handler */ + + acpi_gbl_exception_handler = handler; + + cleanup: + (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_install_exception_handler) +#endif /* ACPI_FUTURE_USAGE */ + +#if (!ACPI_REDUCED_HARDWARE) +/******************************************************************************* + * + * FUNCTION: acpi_install_global_event_handler + * + * PARAMETERS: Handler - Pointer to the global event handler function + * Context - Value passed to the handler on each event + * + * RETURN: Status + * + * DESCRIPTION: Saves the pointer to the handler function. The global handler + * is invoked upon each incoming GPE and Fixed Event. It is + * invoked at interrupt level at the time of the event dispatch. + * Can be used to update event counters, etc. + * + ******************************************************************************/ +acpi_status +acpi_install_global_event_handler(ACPI_GBL_EVENT_HANDLER handler, void *context) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_install_global_event_handler); + + /* Parameter validation */ + + if (!handler) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Don't allow two handlers. */ + + if (acpi_gbl_global_event_handler) { + status = AE_ALREADY_EXISTS; + goto cleanup; + } + + acpi_gbl_global_event_handler = handler; + acpi_gbl_global_event_handler_context = context; + + cleanup: + (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_install_global_event_handler) + +/******************************************************************************* + * + * FUNCTION: acpi_install_fixed_event_handler + * + * PARAMETERS: Event - Event type to enable. + * Handler - Pointer to the handler function for the + * event + * Context - Value passed to the handler on each GPE + * + * RETURN: Status + * + * DESCRIPTION: Saves the pointer to the handler function and then enables the + * event. + * + ******************************************************************************/ +acpi_status +acpi_install_fixed_event_handler(u32 event, + acpi_event_handler handler, void *context) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_install_fixed_event_handler); + + /* Parameter validation */ + + if (event > ACPI_EVENT_MAX) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Don't allow two handlers. */ + + if (NULL != acpi_gbl_fixed_event_handlers[event].handler) { + status = AE_ALREADY_EXISTS; + goto cleanup; + } + + /* Install the handler before enabling the event */ + + acpi_gbl_fixed_event_handlers[event].handler = handler; + acpi_gbl_fixed_event_handlers[event].context = context; + + status = acpi_clear_event(event); + if (ACPI_SUCCESS(status)) + status = acpi_enable_event(event, 0); + if (ACPI_FAILURE(status)) { + ACPI_WARNING((AE_INFO, "Could not enable fixed event 0x%X", + event)); + + /* Remove the handler */ + + acpi_gbl_fixed_event_handlers[event].handler = NULL; + acpi_gbl_fixed_event_handlers[event].context = NULL; + } else { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Enabled fixed event %X, Handler=%p\n", event, + handler)); + } + + cleanup: + (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_install_fixed_event_handler) + +/******************************************************************************* + * + * FUNCTION: acpi_remove_fixed_event_handler + * + * PARAMETERS: Event - Event type to disable. + * Handler - Address of the handler + * + * RETURN: Status + * + * DESCRIPTION: Disables the event and unregisters the event handler. + * + ******************************************************************************/ +acpi_status +acpi_remove_fixed_event_handler(u32 event, acpi_event_handler handler) +{ + acpi_status status = AE_OK; + + ACPI_FUNCTION_TRACE(acpi_remove_fixed_event_handler); + + /* Parameter validation */ + + if (event > ACPI_EVENT_MAX) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Disable the event before removing the handler */ + + status = acpi_disable_event(event, 0); + + /* Always Remove the handler */ + + acpi_gbl_fixed_event_handlers[event].handler = NULL; + acpi_gbl_fixed_event_handlers[event].context = NULL; + + if (ACPI_FAILURE(status)) { + ACPI_WARNING((AE_INFO, + "Could not write to fixed event enable register 0x%X", + event)); + } else { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Disabled fixed event %X\n", + event)); + } + + (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_remove_fixed_event_handler) + +/******************************************************************************* + * * FUNCTION: acpi_install_gpe_handler * * PARAMETERS: gpe_device - Namespace node for the GPE (NULL for FADT @@ -984,3 +987,4 @@ acpi_status acpi_release_global_lock(u32 handle) } ACPI_EXPORT_SYMBOL(acpi_release_global_lock) +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c index 1768bbe..77cee5a 100644 --- a/drivers/acpi/acpica/evxfevnt.c +++ b/drivers/acpi/acpica/evxfevnt.c @@ -49,6 +49,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evxfevnt") +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /******************************************************************************* * * FUNCTION: acpi_enable @@ -352,3 +353,4 @@ acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status) } ACPI_EXPORT_SYMBOL(acpi_get_event_status) +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evxfgpe.c b/drivers/acpi/acpica/evxfgpe.c index 33388fd..86f9b34 100644 --- a/drivers/acpi/acpica/evxfgpe.c +++ b/drivers/acpi/acpica/evxfgpe.c @@ -50,6 +50,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evxfgpe") +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /****************************************************************************** * * FUNCTION: acpi_update_all_gpes @@ -695,3 +696,4 @@ acpi_get_gpe_device(u32 index, acpi_handle *gpe_device) } ACPI_EXPORT_SYMBOL(acpi_get_gpe_device) +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/hwacpi.c b/drivers/acpi/acpica/hwacpi.c index d21ec5f..d0b9ed5 100644 --- a/drivers/acpi/acpica/hwacpi.c +++ b/drivers/acpi/acpica/hwacpi.c @@ -48,6 +48,7 @@ #define _COMPONENT ACPI_HARDWARE ACPI_MODULE_NAME("hwacpi") +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /****************************************************************************** * * FUNCTION: acpi_hw_set_mode @@ -166,3 +167,5 @@ u32 acpi_hw_get_mode(void) return_UINT32(ACPI_SYS_MODE_LEGACY); } } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c index 1a6894a..25bd28c 100644 --- a/drivers/acpi/acpica/hwgpe.c +++ b/drivers/acpi/acpica/hwgpe.c @@ -48,7 +48,7 @@ #define _COMPONENT ACPI_HARDWARE ACPI_MODULE_NAME("hwgpe") - +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /* Local prototypes */ static acpi_status acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, @@ -479,3 +479,5 @@ acpi_status acpi_hw_enable_all_wakeup_gpes(void) status = acpi_ev_walk_gpe_list(acpi_hw_enable_wakeup_gpe_block, NULL); return_ACPI_STATUS(status); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c index 4ea4eeb5..17a78e5 100644 --- a/drivers/acpi/acpica/hwregs.c +++ b/drivers/acpi/acpica/hwregs.c @@ -51,6 +51,7 @@ #define _COMPONENT ACPI_HARDWARE ACPI_MODULE_NAME("hwregs") +#if (!ACPI_REDUCED_HARDWARE) /* Local Prototypes */ static acpi_status acpi_hw_read_multiple(u32 *value, @@ -62,6 +63,8 @@ acpi_hw_write_multiple(u32 value, struct acpi_generic_address *register_a, struct acpi_generic_address *register_b); +#endif /* !ACPI_REDUCED_HARDWARE */ + /****************************************************************************** * * FUNCTION: acpi_hw_validate_register @@ -240,6 +243,7 @@ acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg) return (status); } +#if (!ACPI_REDUCED_HARDWARE) /******************************************************************************* * * FUNCTION: acpi_hw_clear_acpi_status @@ -285,7 +289,7 @@ exit: /******************************************************************************* * - * FUNCTION: acpi_hw_get_register_bit_mask + * FUNCTION: acpi_hw_get_bit_register_info * * PARAMETERS: register_id - Index of ACPI Register to access * @@ -658,3 +662,5 @@ acpi_hw_write_multiple(u32 value, return (status); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c index 59a2a6b..fa34147 100644 --- a/drivers/acpi/acpica/hwsleep.c +++ b/drivers/acpi/acpica/hwsleep.c @@ -197,6 +197,7 @@ void acpi_hw_execute_SST(u32 indicator_id) } } +#if (!ACPI_REDUCED_HARDWARE) /******************************************************************************* * * FUNCTION: acpi_hw_legacy_sleep @@ -512,6 +513,7 @@ acpi_status acpi_hw_legacy_wake(u8 sleep_state) return_ACPI_STATUS(status); } +#endif /* !ACPI_REDUCED_HARDWARE */ /******************************************************************************* * diff --git a/drivers/acpi/acpica/hwtimer.c b/drivers/acpi/acpica/hwtimer.c index d4973d9..f1b2c3b 100644 --- a/drivers/acpi/acpica/hwtimer.c +++ b/drivers/acpi/acpica/hwtimer.c @@ -49,6 +49,7 @@ #define _COMPONENT ACPI_HARDWARE ACPI_MODULE_NAME("hwtimer") +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /****************************************************************************** * * FUNCTION: acpi_get_timer_resolution @@ -187,3 +188,4 @@ acpi_get_timer_duration(u32 start_ticks, u32 end_ticks, u32 * time_elapsed) } ACPI_EXPORT_SYMBOL(acpi_get_timer_duration) +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c index 9d38eb6..bb8dba6 100644 --- a/drivers/acpi/acpica/hwxface.c +++ b/drivers/acpi/acpica/hwxface.c @@ -286,6 +286,7 @@ acpi_status acpi_write(u64 value, struct acpi_generic_address *reg) ACPI_EXPORT_SYMBOL(acpi_write) +#if (!ACPI_REDUCED_HARDWARE) /******************************************************************************* * * FUNCTION: acpi_read_bit_register @@ -453,7 +454,7 @@ unlock_and_exit: } ACPI_EXPORT_SYMBOL(acpi_write_bit_register) - +#endif /* !ACPI_REDUCED_HARDWARE */ /******************************************************************************* * * FUNCTION: acpi_get_sleep_type_data diff --git a/drivers/acpi/acpica/hwxfsleep.c b/drivers/acpi/acpica/hwxfsleep.c index 29c0fd3..d599961 100644 --- a/drivers/acpi/acpica/hwxfsleep.c +++ b/drivers/acpi/acpica/hwxfsleep.c @@ -48,6 +48,7 @@ #define _COMPONENT ACPI_HARDWARE ACPI_MODULE_NAME("hwxfsleep") +#if (!ACPI_REDUCED_HARDWARE) /******************************************************************************* * * FUNCTION: acpi_set_firmware_waking_vector @@ -189,7 +190,7 @@ acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void) } ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios) - +#endif /* !ACPI_REDUCED_HARDWARE */ /******************************************************************************* * * FUNCTION: acpi_enter_sleep_state_prep @@ -290,6 +291,7 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) acpi_gbl_sleep_type_a, acpi_gbl_sleep_type_b)); return_ACPI_STATUS(AE_AML_OPERAND_VALUE); } +#if (!ACPI_REDUCED_HARDWARE) /* If Hardware Reduced flag is set, must use the extended sleep registers */ @@ -301,6 +303,11 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) status = acpi_hw_legacy_sleep(sleep_state); } +#else + status = acpi_hw_extended_sleep(sleep_state); + +#endif /* !ACPI_REDUCED_HARDWARE */ + return_ACPI_STATUS(status); } @@ -326,6 +333,8 @@ acpi_status acpi_leave_sleep_state_prep(u8 sleep_state) ACPI_FUNCTION_TRACE(acpi_leave_sleep_state); +#if (!ACPI_REDUCED_HARDWARE) + /* If Hardware Reduced flag is set, must use the extended sleep registers */ if (acpi_gbl_reduced_hardware || acpi_gbl_FADT.sleep_control.address) { @@ -335,6 +344,10 @@ acpi_status acpi_leave_sleep_state_prep(u8 sleep_state) status = acpi_hw_legacy_wake_prep(sleep_state); } +#else + status = acpi_hw_extended_wake_prep(sleep_state); + +#endif /* !ACPI_REDUCED_HARDWARE */ return_ACPI_STATUS(status); @@ -361,6 +374,8 @@ acpi_status acpi_leave_sleep_state(u8 sleep_state) ACPI_FUNCTION_TRACE(acpi_leave_sleep_state); +#if (!ACPI_REDUCED_HARDWARE) + /* If Hardware Reduced flag is set, must use the extended sleep registers */ if (acpi_gbl_reduced_hardware || acpi_gbl_FADT.sleep_control.address) { @@ -371,6 +386,11 @@ acpi_status acpi_leave_sleep_state(u8 sleep_state) status = acpi_hw_legacy_wake(sleep_state); } +#else + status = acpi_hw_extended_wake(sleep_state); + +#endif /* !ACPI_REDUCED_HARDWARE */ + return_ACPI_STATUS(status); } diff --git a/drivers/acpi/acpica/tbutils.c b/drivers/acpi/acpica/tbutils.c index 09ca39e..1347c08 100644 --- a/drivers/acpi/acpica/tbutils.c +++ b/drivers/acpi/acpica/tbutils.c @@ -118,6 +118,7 @@ acpi_tb_check_xsdt(acpi_physical_address address) return AE_OK; } +#if (!ACPI_REDUCED_HARDWARE) /******************************************************************************* * * FUNCTION: acpi_tb_initialize_facs @@ -148,6 +149,7 @@ acpi_status acpi_tb_initialize_facs(void) &acpi_gbl_FACS)); return status; } +#endif /* !ACPI_REDUCED_HARDWARE */ /******************************************************************************* * diff --git a/drivers/acpi/acpica/utglobal.c b/drivers/acpi/acpica/utglobal.c index 4153584..90f53b4 100644 --- a/drivers/acpi/acpica/utglobal.c +++ b/drivers/acpi/acpica/utglobal.c @@ -140,6 +140,7 @@ const struct acpi_predefined_names acpi_gbl_pre_defined_names[] = { {NULL, ACPI_TYPE_ANY, NULL} }; +#if (!ACPI_REDUCED_HARDWARE) /****************************************************************************** * * Event and Hardware globals @@ -236,6 +237,7 @@ struct acpi_fixed_event_info acpi_gbl_fixed_event_info[ACPI_NUM_FIXED_EVENTS] = ACPI_BITMASK_RT_CLOCK_STATUS, ACPI_BITMASK_RT_CLOCK_ENABLE}, }; +#endif /* !ACPI_REDUCED_HARDWARE */ /******************************************************************************* * @@ -286,6 +288,8 @@ acpi_status acpi_ut_init_globals(void) acpi_gbl_owner_id_mask[ACPI_NUM_OWNERID_MASKS - 1] = 0x80000000; +#if (!ACPI_REDUCED_HARDWARE) + /* GPE support */ acpi_gbl_gpe_xrupt_list_head = NULL; @@ -294,6 +298,10 @@ acpi_status acpi_ut_init_globals(void) acpi_current_gpe_count = 0; acpi_gbl_all_gpes_initialized = FALSE; + acpi_gbl_global_event_handler = NULL; + +#endif /* !ACPI_REDUCED_HARDWARE */ + /* Global handlers */ acpi_gbl_system_notify.handler = NULL; @@ -302,7 +310,6 @@ acpi_status acpi_ut_init_globals(void) acpi_gbl_init_handler = NULL; acpi_gbl_table_handler = NULL; acpi_gbl_interface_handler = NULL; - acpi_gbl_global_event_handler = NULL; /* Global Lock support */ diff --git a/drivers/acpi/acpica/utinit.c b/drivers/acpi/acpica/utinit.c index 8359c0c..246798e 100644 --- a/drivers/acpi/acpica/utinit.c +++ b/drivers/acpi/acpica/utinit.c @@ -53,27 +53,35 @@ ACPI_MODULE_NAME("utinit") /* Local prototypes */ static void acpi_ut_terminate(void); +#if (!ACPI_REDUCED_HARDWARE) + +static void acpi_ut_free_gpe_lists(void); + +#else + +#define acpi_ut_free_gpe_lists() +#endif /* !ACPI_REDUCED_HARDWARE */ + +#if (!ACPI_REDUCED_HARDWARE) /****************************************************************************** * - * FUNCTION: acpi_ut_terminate + * FUNCTION: acpi_ut_free_gpe_lists * * PARAMETERS: none * * RETURN: none * - * DESCRIPTION: Free global memory + * DESCRIPTION: Free global GPE lists * ******************************************************************************/ -static void acpi_ut_terminate(void) +static void acpi_ut_free_gpe_lists(void) { struct acpi_gpe_block_info *gpe_block; struct acpi_gpe_block_info *next_gpe_block; struct acpi_gpe_xrupt_info *gpe_xrupt_info; struct acpi_gpe_xrupt_info *next_gpe_xrupt_info; - ACPI_FUNCTION_TRACE(ut_terminate); - /* Free global GPE blocks and related info structures */ gpe_xrupt_info = acpi_gbl_gpe_xrupt_list_head; @@ -91,7 +99,26 @@ static void acpi_ut_terminate(void) ACPI_FREE(gpe_xrupt_info); gpe_xrupt_info = next_gpe_xrupt_info; } +} +#endif /* !ACPI_REDUCED_HARDWARE */ + +/****************************************************************************** + * + * FUNCTION: acpi_ut_terminate + * + * PARAMETERS: none + * + * RETURN: none + * + * DESCRIPTION: Free global memory + * + ******************************************************************************/ + +static void acpi_ut_terminate(void) +{ + ACPI_FUNCTION_TRACE(ut_terminate); + acpi_ut_free_gpe_lists(); acpi_ut_delete_address_lists(); return_VOID; } diff --git a/drivers/acpi/acpica/utxface.c b/drivers/acpi/acpica/utxface.c index 644e8c8..afa94f5 100644 --- a/drivers/acpi/acpica/utxface.c +++ b/drivers/acpi/acpica/utxface.c @@ -145,6 +145,8 @@ acpi_status acpi_enable_subsystem(u32 flags) ACPI_FUNCTION_TRACE(acpi_enable_subsystem); +#if (!ACPI_REDUCED_HARDWARE) + /* Enable ACPI mode */ if (!(flags & ACPI_NO_ACPI_ENABLE)) { @@ -169,6 +171,7 @@ acpi_status acpi_enable_subsystem(u32 flags) ACPI_WARNING((AE_INFO, "Could not map the FACS table")); return_ACPI_STATUS(status); } +#endif /* !ACPI_REDUCED_HARDWARE */ /* * Install the default op_region handlers. These are installed unless @@ -184,7 +187,7 @@ acpi_status acpi_enable_subsystem(u32 flags) return_ACPI_STATUS(status); } } - +#if (!ACPI_REDUCED_HARDWARE) /* * Initialize ACPI Event handling (Fixed and General Purpose) * @@ -220,6 +223,7 @@ acpi_status acpi_enable_subsystem(u32 flags) return_ACPI_STATUS(status); } } +#endif /* !ACPI_REDUCED_HARDWARE */ return_ACPI_STATUS(status); } diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h new file mode 100644 index 0000000..03f1485 --- /dev/null +++ b/include/acpi/acconfig.h @@ -0,0 +1,248 @@ +/****************************************************************************** + * + * Name: acconfig.h - Global configuration constants + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2012, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#ifndef _ACCONFIG_H +#define _ACCONFIG_H + +/****************************************************************************** + * + * Configuration options + * + *****************************************************************************/ + +/* + * ACPI_DEBUG_OUTPUT - This switch enables all the debug facilities of the + * ACPI subsystem. This includes the DEBUG_PRINT output + * statements. When disabled, all DEBUG_PRINT + * statements are compiled out. + * + * ACPI_APPLICATION - Use this switch if the subsystem is going to be run + * at the application level. + * + */ + +/* + * OS name, used for the _OS object. The _OS object is essentially obsolete, + * but there is a large base of ASL/AML code in existing machines that check + * for the string below. The use of this string usually guarantees that + * the ASL will execute down the most tested code path. Also, there is some + * code that will not execute the _OSI method unless _OS matches the string + * below. Therefore, change this string at your own risk. + */ +#define ACPI_OS_NAME "Microsoft Windows NT" + +/* Maximum objects in the various object caches */ + +#define ACPI_MAX_STATE_CACHE_DEPTH 96 /* State objects */ +#define ACPI_MAX_PARSE_CACHE_DEPTH 96 /* Parse tree objects */ +#define ACPI_MAX_EXTPARSE_CACHE_DEPTH 96 /* Parse tree objects */ +#define ACPI_MAX_OBJECT_CACHE_DEPTH 96 /* Interpreter operand objects */ +#define ACPI_MAX_NAMESPACE_CACHE_DEPTH 96 /* Namespace objects */ + +/* + * Should the subsystem abort the loading of an ACPI table if the + * table checksum is incorrect? + */ +#define ACPI_CHECKSUM_ABORT FALSE + +/* + * Generate a version of ACPICA that only supports "reduced hardware" + * platforms (as defined in ACPI 5.0). Set to TRUE to generate a specialized + * version of ACPICA that ONLY supports the ACPI 5.0 "reduced hardware" + * model. In other words, no ACPI hardware is supported. + * + * If TRUE, this means no support for the following: + * PM Event and Control registers + * SCI interrupt (and handler) + * Fixed Events + * General Purpose Events (GPEs) + * Global Lock + * ACPI PM timer + * FACS table (Waking vectors and Global Lock) + */ +#define ACPI_REDUCED_HARDWARE FALSE + +/****************************************************************************** + * + * Subsystem Constants + * + *****************************************************************************/ + +/* Version of ACPI supported */ + +#define ACPI_CA_SUPPORT_LEVEL 5 + +/* Maximum count for a semaphore object */ + +#define ACPI_MAX_SEMAPHORE_COUNT 256 + +/* Maximum object reference count (detects object deletion issues) */ + +#define ACPI_MAX_REFERENCE_COUNT 0x1000 + +/* Default page size for use in mapping memory for operation regions */ + +#define ACPI_DEFAULT_PAGE_SIZE 4096 /* Must be power of 2 */ + +/* owner_id tracking. 8 entries allows for 255 owner_ids */ + +#define ACPI_NUM_OWNERID_MASKS 8 + +/* Size of the root table array is increased by this increment */ + +#define ACPI_ROOT_TABLE_SIZE_INCREMENT 4 + +/* Maximum number of While() loop iterations before forced abort */ + +#define ACPI_MAX_LOOP_ITERATIONS 0xFFFF + +/* Maximum sleep allowed via Sleep() operator */ + +#define ACPI_MAX_SLEEP 2000 /* Two seconds */ + +/* Address Range lists are per-space_id (Memory and I/O only) */ + +#define ACPI_ADDRESS_RANGE_MAX 2 + +/****************************************************************************** + * + * ACPI Specification constants (Do not change unless the specification changes) + * + *****************************************************************************/ + +/* Number of distinct GPE register blocks and register width */ + +#define ACPI_MAX_GPE_BLOCKS 2 +#define ACPI_GPE_REGISTER_WIDTH 8 + +/* Method info (in WALK_STATE), containing local variables and argumetns */ + +#define ACPI_METHOD_NUM_LOCALS 8 +#define ACPI_METHOD_MAX_LOCAL 7 + +#define ACPI_METHOD_NUM_ARGS 7 +#define ACPI_METHOD_MAX_ARG 6 + +/* Length of _HID, _UID, _CID, and UUID values */ + +#define ACPI_DEVICE_ID_LENGTH 0x09 +#define ACPI_MAX_CID_LENGTH 48 +#define ACPI_UUID_LENGTH 16 + +/* + * Operand Stack (in WALK_STATE), Must be large enough to contain METHOD_MAX_ARG + */ +#define ACPI_OBJ_NUM_OPERANDS 8 +#define ACPI_OBJ_MAX_OPERAND 7 + +/* Number of elements in the Result Stack frame, can be an arbitrary value */ + +#define ACPI_RESULTS_FRAME_OBJ_NUM 8 + +/* + * Maximal number of elements the Result Stack can contain, + * it may be an arbitray value not exceeding the types of + * result_size and result_count (now u8). + */ +#define ACPI_RESULTS_OBJ_NUM_MAX 255 + +/* Names within the namespace are 4 bytes long */ + +#define ACPI_NAME_SIZE 4 +#define ACPI_PATH_SEGMENT_LENGTH 5 /* 4 chars for name + 1 char for separator */ +#define ACPI_PATH_SEPARATOR '.' + +/* Sizes for ACPI table headers */ + +#define ACPI_OEM_ID_SIZE 6 +#define ACPI_OEM_TABLE_ID_SIZE 8 + +/* Constants used in searching for the RSDP in low memory */ + +#define ACPI_EBDA_PTR_LOCATION 0x0000040E /* Physical Address */ +#define ACPI_EBDA_PTR_LENGTH 2 +#define ACPI_EBDA_WINDOW_SIZE 1024 +#define ACPI_HI_RSDP_WINDOW_BASE 0x000E0000 /* Physical Address */ +#define ACPI_HI_RSDP_WINDOW_SIZE 0x00020000 +#define ACPI_RSDP_SCAN_STEP 16 + +/* Operation regions */ + +#define ACPI_USER_REGION_BEGIN 0x80 + +/* Maximum space_ids for Operation Regions */ + +#define ACPI_MAX_ADDRESS_SPACE 255 + +/* Array sizes. Used for range checking also */ + +#define ACPI_MAX_MATCH_OPCODE 5 + +/* RSDP checksums */ + +#define ACPI_RSDP_CHECKSUM_LENGTH 20 +#define ACPI_RSDP_XCHECKSUM_LENGTH 36 + +/* SMBus, GSBus and IPMI bidirectional buffer size */ + +#define ACPI_SMBUS_BUFFER_SIZE 34 +#define ACPI_GSBUS_BUFFER_SIZE 34 +#define ACPI_IPMI_BUFFER_SIZE 66 + +/* _sx_d and _sx_w control methods */ + +#define ACPI_NUM_sx_d_METHODS 4 +#define ACPI_NUM_sx_w_METHODS 5 + +/****************************************************************************** + * + * ACPI AML Debugger + * + *****************************************************************************/ + +#define ACPI_DEBUGGER_MAX_ARGS 8 /* Must be max method args + 1 */ + +#define ACPI_DEBUGGER_COMMAND_PROMPT '-' +#define ACPI_DEBUGGER_EXECUTE_PROMPT '%' + +#endif /* _ACCONFIG_H */ diff --git a/include/acpi/acexcep.h b/include/acpi/acexcep.h index 5b6c391..47b3902 100644 --- a/include/acpi/acexcep.h +++ b/include/acpi/acexcep.h @@ -89,8 +89,9 @@ #define AE_SAME_HANDLER (acpi_status) (0x0019 | AE_CODE_ENVIRONMENTAL) #define AE_NO_HANDLER (acpi_status) (0x001A | AE_CODE_ENVIRONMENTAL) #define AE_OWNER_ID_LIMIT (acpi_status) (0x001B | AE_CODE_ENVIRONMENTAL) +#define AE_NOT_CONFIGURED (acpi_status) (0x001C | AE_CODE_ENVIRONMENTAL) -#define AE_CODE_ENV_MAX 0x001B +#define AE_CODE_ENV_MAX 0x001C /* * Programmer exceptions @@ -213,7 +214,8 @@ char const *acpi_gbl_exception_names_env[] = { "AE_ABORT_METHOD", "AE_SAME_HANDLER", "AE_NO_HANDLER", - "AE_OWNER_ID_LIMIT" + "AE_OWNER_ID_LIMIT", + "AE_NOT_CONFIGURED" }; char const *acpi_gbl_exception_names_pgm[] = { diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index 67cd51c..e8600dd9 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -49,6 +49,7 @@ #define ACPI_CA_VERSION 0x20120111 +#include "acconfig.h" #include "actypes.h" #include "actbl.h" @@ -71,6 +72,33 @@ extern u8 acpi_gbl_copy_dsdt_locally; extern u8 acpi_gbl_truncate_io_addresses; extern u8 acpi_gbl_disable_auto_repair; +/* + * Hardware-reduced prototypes. All interfaces that use these macros will + * be configured out of the ACPICA build if the ACPI_REDUCED_HARDWARE flag + * is set to TRUE. + */ +#if (!ACPI_REDUCED_HARDWARE) +#define ACPI_HW_DEPENDENT_RETURN_STATUS(prototype) \ + prototype; + +#define ACPI_HW_DEPENDENT_RETURN_OK(prototype) \ + prototype; + +#define ACPI_HW_DEPENDENT_RETURN_VOID(prototype) \ + prototype; + +#else +#define ACPI_HW_DEPENDENT_RETURN_STATUS(prototype) \ + static ACPI_INLINE prototype {return(AE_NOT_CONFIGURED);} + +#define ACPI_HW_DEPENDENT_RETURN_OK(prototype) \ + static ACPI_INLINE prototype {return(AE_OK);} + +#define ACPI_HW_DEPENDENT_RETURN_VOID(prototype) \ + static ACPI_INLINE prototype {} + +#endif /* !ACPI_REDUCED_HARDWARE */ + extern u32 acpi_current_gpe_count; extern struct acpi_table_fadt acpi_gbl_FADT; extern u8 acpi_gbl_system_awake_and_running; @@ -96,9 +124,8 @@ acpi_status acpi_terminate(void); acpi_status acpi_subsystem_status(void); #endif -acpi_status acpi_enable(void); - -acpi_status acpi_disable(void); +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_enable(void)) +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_disable(void)) #ifdef ACPI_FUTURE_USAGE acpi_status acpi_get_system_info(struct acpi_buffer *ret_buffer); @@ -235,17 +262,34 @@ acpi_status acpi_get_parent(acpi_handle object, acpi_handle * out_handle); acpi_status acpi_install_initialization_handler(acpi_init_handler handler, u32 function); -acpi_status -acpi_install_global_event_handler(ACPI_GBL_EVENT_HANDLER handler, - void *context); - -acpi_status -acpi_install_fixed_event_handler(u32 acpi_event, - acpi_event_handler handler, void *context); - -acpi_status -acpi_remove_fixed_event_handler(u32 acpi_event, acpi_event_handler handler); - +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_install_global_event_handler + (ACPI_GBL_EVENT_HANDLER handler, void *context)) + +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_install_fixed_event_handler(u32 + acpi_event, + acpi_event_handler + handler, + void + *context)) +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_remove_fixed_event_handler(u32 acpi_event, + acpi_event_handler + handler)) +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_install_gpe_handler(acpi_handle + gpe_device, + u32 gpe_number, + u32 type, + acpi_gpe_handler + address, + void *context)) +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_remove_gpe_handler(acpi_handle gpe_device, + u32 gpe_number, + acpi_gpe_handler + address)) acpi_status acpi_install_notify_handler(acpi_handle device, u32 handler_type, @@ -266,15 +310,6 @@ acpi_remove_address_space_handler(acpi_handle device, acpi_adr_space_type space_id, acpi_adr_space_handler handler); -acpi_status -acpi_install_gpe_handler(acpi_handle gpe_device, - u32 gpe_number, - u32 type, acpi_gpe_handler address, void *context); - -acpi_status -acpi_remove_gpe_handler(acpi_handle gpe_device, - u32 gpe_number, acpi_gpe_handler address); - #ifdef ACPI_FUTURE_USAGE acpi_status acpi_install_exception_handler(acpi_exception_handler handler); #endif @@ -284,9 +319,11 @@ acpi_status acpi_install_interface_handler(acpi_interface_handler handler); /* * Global Lock interfaces */ -acpi_status acpi_acquire_global_lock(u16 timeout, u32 * handle); - -acpi_status acpi_release_global_lock(u32 handle); +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_acquire_global_lock(u16 timeout, + u32 *handle)) +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_release_global_lock(u32 handle)) /* * Interfaces to AML mutex objects @@ -299,47 +336,75 @@ acpi_status acpi_release_mutex(acpi_handle handle, acpi_string pathname); /* * Fixed Event interfaces */ -acpi_status acpi_enable_event(u32 event, u32 flags); - -acpi_status acpi_disable_event(u32 event, u32 flags); +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_enable_event(u32 event, u32 flags)) -acpi_status acpi_clear_event(u32 event); +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_disable_event(u32 event, u32 flags)) -acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status); +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_clear_event(u32 event)) +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_get_event_status(u32 event, + acpi_event_status + *event_status)) /* * General Purpose Event (GPE) Interfaces */ -acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number); - -acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number); - -acpi_status acpi_clear_gpe(acpi_handle gpe_device, u32 gpe_number); - -acpi_status -acpi_setup_gpe_for_wake(acpi_handle parent_device, - acpi_handle gpe_device, u32 gpe_number); - -acpi_status acpi_set_gpe_wake_mask(acpi_handle gpe_device, u32 gpe_number, u8 action); - -acpi_status -acpi_get_gpe_status(acpi_handle gpe_device, - u32 gpe_number, acpi_event_status *event_status); - -acpi_status acpi_disable_all_gpes(void); - -acpi_status acpi_enable_all_runtime_gpes(void); - -acpi_status acpi_get_gpe_device(u32 gpe_index, acpi_handle *gpe_device); - -acpi_status -acpi_install_gpe_block(acpi_handle gpe_device, - struct acpi_generic_address *gpe_block_address, - u32 register_count, u32 interrupt_number); - -acpi_status acpi_remove_gpe_block(acpi_handle gpe_device); - -acpi_status acpi_update_all_gpes(void); +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_update_all_gpes(void)) + +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_enable_gpe(acpi_handle gpe_device, + u32 gpe_number)) + +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_disable_gpe(acpi_handle gpe_device, + u32 gpe_number)) + +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_clear_gpe(acpi_handle gpe_device, + u32 gpe_number)) + +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_set_gpe(acpi_handle gpe_device, + u32 gpe_number, u8 action)) + +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_finish_gpe(acpi_handle gpe_device, + u32 gpe_number)) + +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_setup_gpe_for_wake(acpi_handle + parent_device, + acpi_handle gpe_device, + u32 gpe_number)) +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_set_gpe_wake_mask(acpi_handle gpe_device, + u32 gpe_number, + u8 action)) +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_get_gpe_status(acpi_handle gpe_device, + u32 gpe_number, + acpi_event_status + *event_status)) + +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_disable_all_gpes(void)) + +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_enable_all_runtime_gpes(void)) + +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_get_gpe_device(u32 gpe_index, + acpi_handle * gpe_device)) + +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_install_gpe_block(acpi_handle gpe_device, + struct + acpi_generic_address + *gpe_block_address, + u32 register_count, + u32 interrupt_number)) +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_remove_gpe_block(acpi_handle gpe_device)) /* * Resource interfaces @@ -391,20 +456,31 @@ acpi_buffer_to_resource(u8 *aml_buffer, */ acpi_status acpi_reset(void); -acpi_status acpi_read_bit_register(u32 register_id, u32 *return_value); +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_read_bit_register(u32 register_id, + u32 *return_value)) -acpi_status acpi_write_bit_register(u32 register_id, u32 value); +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_write_bit_register(u32 register_id, + u32 value)) -acpi_status acpi_set_firmware_waking_vector(u32 physical_address); +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_set_firmware_waking_vector(u32 + physical_address)) #if ACPI_MACHINE_WIDTH == 64 -acpi_status acpi_set_firmware_waking_vector64(u64 physical_address); +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_set_firmware_waking_vector64(u64 + physical_address)) #endif acpi_status acpi_read(u64 *value, struct acpi_generic_address *reg); acpi_status acpi_write(u64 value, struct acpi_generic_address *reg); +/* + * Sleep/Wake interfaces + */ acpi_status acpi_get_sleep_type_data(u8 sleep_state, u8 * slp_typ_a, u8 * slp_typ_b); @@ -412,7 +488,7 @@ acpi_status acpi_enter_sleep_state_prep(u8 sleep_state); acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state); -acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void); +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void)) acpi_status acpi_leave_sleep_state_prep(u8 sleep_state); @@ -422,12 +498,15 @@ acpi_status acpi_leave_sleep_state(u8 sleep_state); * ACPI Timer interfaces */ #ifdef ACPI_FUTURE_USAGE -acpi_status acpi_get_timer_resolution(u32 *resolution); +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_get_timer_resolution(u32 *resolution)) -acpi_status acpi_get_timer(u32 *ticks); +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_get_timer(u32 *ticks)) -acpi_status -acpi_get_timer_duration(u32 start_ticks, u32 end_ticks, u32 *time_elapsed); +ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status + acpi_get_timer_duration(u32 start_ticks, + u32 end_ticks, + u32 *time_elapsed)) #endif /* ACPI_FUTURE_USAGE */ /* -- cgit v0.10.2 From 653f4b538f66d37db560e0f56af08117136d29b7 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 14 Feb 2012 18:29:55 +0800 Subject: ACPICA: Expand OSL memory read/write interfaces to 64 bits This change expands acpi_os_read_memory and acpi_os_write_memory to a full 64 bits. This allows 64 bit transfers via the acpi_read and acpi_write interfaces. Note: The internal acpi_hw_read and acpi_hw_write interfaces remain at 32 bits, because 64 bits is not needed to access the standard ACPI registers. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c index 17a78e5..6b6c83b 100644 --- a/drivers/acpi/acpica/hwregs.c +++ b/drivers/acpi/acpica/hwregs.c @@ -157,6 +157,7 @@ acpi_hw_validate_register(struct acpi_generic_address *reg, acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg) { u64 address; + u64 value64; acpi_status status; ACPI_FUNCTION_NAME(hw_read); @@ -178,7 +179,9 @@ acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg) */ if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { status = acpi_os_read_memory((acpi_physical_address) - address, value, reg->bit_width); + address, &value64, reg->bit_width); + + *value = (u32)value64; } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ status = acpi_hw_read_port((acpi_io_address) @@ -228,7 +231,8 @@ acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg) */ if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { status = acpi_os_write_memory((acpi_physical_address) - address, value, reg->bit_width); + address, (u64)value, + reg->bit_width); } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ status = acpi_hw_write_port((acpi_io_address) diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c index bb8dba6..a716fed 100644 --- a/drivers/acpi/acpica/hwxface.c +++ b/drivers/acpi/acpica/hwxface.c @@ -138,11 +138,6 @@ acpi_status acpi_read(u64 *return_value, struct acpi_generic_address *reg) return (status); } - width = reg->bit_width; - if (width == 64) { - width = 32; /* Break into two 32-bit transfers */ - } - /* Initialize entire 64-bit return value to zero */ *return_value = 0; @@ -154,24 +149,17 @@ acpi_status acpi_read(u64 *return_value, struct acpi_generic_address *reg) */ if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { status = acpi_os_read_memory((acpi_physical_address) - address, &value, width); + address, return_value, + reg->bit_width); if (ACPI_FAILURE(status)) { return (status); } - *return_value = value; - - if (reg->bit_width == 64) { - - /* Read the top 32 bits */ + } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ - status = acpi_os_read_memory((acpi_physical_address) - (address + 4), &value, 32); - if (ACPI_FAILURE(status)) { - return (status); - } - *return_value |= ((u64)value << 32); + width = reg->bit_width; + if (width == 64) { + width = 32; /* Break into two 32-bit transfers */ } - } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ status = acpi_hw_read_port((acpi_io_address) address, &value, width); @@ -231,32 +219,22 @@ acpi_status acpi_write(u64 value, struct acpi_generic_address *reg) return (status); } - width = reg->bit_width; - if (width == 64) { - width = 32; /* Break into two 32-bit transfers */ - } - /* * Two address spaces supported: Memory or IO. PCI_Config is * not supported here because the GAS structure is insufficient */ if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { status = acpi_os_write_memory((acpi_physical_address) - address, ACPI_LODWORD(value), - width); + address, value, reg->bit_width); if (ACPI_FAILURE(status)) { return (status); } + } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ - if (reg->bit_width == 64) { - status = acpi_os_write_memory((acpi_physical_address) - (address + 4), - ACPI_HIDWORD(value), 32); - if (ACPI_FAILURE(status)) { - return (status); - } + width = reg->bit_width; + if (width == 64) { + width = 32; /* Break into two 32-bit transfers */ } - } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ status = acpi_hw_write_port((acpi_io_address) address, ACPI_LODWORD(value), diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c index e5d53b7..ca77368 100644 --- a/drivers/acpi/apei/apei-base.c +++ b/drivers/acpi/apei/apei-base.c @@ -605,7 +605,7 @@ int apei_read(u64 *val, struct acpi_generic_address *reg) *val = 0; switch(reg->space_id) { case ACPI_ADR_SPACE_SYSTEM_MEMORY: - status = acpi_os_read_memory64((acpi_physical_address) + status = acpi_os_read_memory((acpi_physical_address) address, val, reg->bit_width); if (ACPI_FAILURE(status)) return -EIO; @@ -636,7 +636,7 @@ int apei_write(u64 val, struct acpi_generic_address *reg) switch (reg->space_id) { case ACPI_ADR_SPACE_SYSTEM_MEMORY: - status = acpi_os_write_memory64((acpi_physical_address) + status = acpi_os_write_memory((acpi_physical_address) address, val, reg->bit_width); if (ACPI_FAILURE(status)) return -EIO; diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 412a1e0..1dea025 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -699,49 +699,6 @@ acpi_status acpi_os_write_port(acpi_io_address port, u32 value, u32 width) EXPORT_SYMBOL(acpi_os_write_port); -acpi_status -acpi_os_read_memory(acpi_physical_address phys_addr, u32 * value, u32 width) -{ - void __iomem *virt_addr; - unsigned int size = width / 8; - bool unmap = false; - u32 dummy; - - rcu_read_lock(); - virt_addr = acpi_map_vaddr_lookup(phys_addr, size); - if (!virt_addr) { - rcu_read_unlock(); - virt_addr = acpi_os_ioremap(phys_addr, size); - if (!virt_addr) - return AE_BAD_ADDRESS; - unmap = true; - } - - if (!value) - value = &dummy; - - switch (width) { - case 8: - *(u8 *) value = readb(virt_addr); - break; - case 16: - *(u16 *) value = readw(virt_addr); - break; - case 32: - *(u32 *) value = readl(virt_addr); - break; - default: - BUG(); - } - - if (unmap) - iounmap(virt_addr); - else - rcu_read_unlock(); - - return AE_OK; -} - #ifdef readq static inline u64 read64(const volatile void __iomem *addr) { @@ -758,7 +715,7 @@ static inline u64 read64(const volatile void __iomem *addr) #endif acpi_status -acpi_os_read_memory64(acpi_physical_address phys_addr, u64 *value, u32 width) +acpi_os_read_memory(acpi_physical_address phys_addr, u64 *value, u32 width) { void __iomem *virt_addr; unsigned int size = width / 8; @@ -803,45 +760,6 @@ acpi_os_read_memory64(acpi_physical_address phys_addr, u64 *value, u32 width) return AE_OK; } -acpi_status -acpi_os_write_memory(acpi_physical_address phys_addr, u32 value, u32 width) -{ - void __iomem *virt_addr; - unsigned int size = width / 8; - bool unmap = false; - - rcu_read_lock(); - virt_addr = acpi_map_vaddr_lookup(phys_addr, size); - if (!virt_addr) { - rcu_read_unlock(); - virt_addr = acpi_os_ioremap(phys_addr, size); - if (!virt_addr) - return AE_BAD_ADDRESS; - unmap = true; - } - - switch (width) { - case 8: - writeb(value, virt_addr); - break; - case 16: - writew(value, virt_addr); - break; - case 32: - writel(value, virt_addr); - break; - default: - BUG(); - } - - if (unmap) - iounmap(virt_addr); - else - rcu_read_unlock(); - - return AE_OK; -} - #ifdef writeq static inline void write64(u64 val, volatile void __iomem *addr) { @@ -856,7 +774,7 @@ static inline void write64(u64 val, volatile void __iomem *addr) #endif acpi_status -acpi_os_write_memory64(acpi_physical_address phys_addr, u64 value, u32 width) +acpi_os_write_memory(acpi_physical_address phys_addr, u64 value, u32 width) { void __iomem *virt_addr; unsigned int size = width / 8; diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h index 7c9aebe..1cd2204 100644 --- a/include/acpi/acpiosxf.h +++ b/include/acpi/acpiosxf.h @@ -217,14 +217,10 @@ acpi_status acpi_os_write_port(acpi_io_address address, u32 value, u32 width); * Platform and hardware-independent physical memory interfaces */ acpi_status -acpi_os_read_memory(acpi_physical_address address, u32 * value, u32 width); -acpi_status -acpi_os_read_memory64(acpi_physical_address address, u64 *value, u32 width); +acpi_os_read_memory(acpi_physical_address address, u64 *value, u32 width); acpi_status -acpi_os_write_memory(acpi_physical_address address, u32 value, u32 width); -acpi_status -acpi_os_write_memory64(acpi_physical_address address, u64 value, u32 width); +acpi_os_write_memory(acpi_physical_address address, u64 value, u32 width); /* * Platform and hardware-independent PCI configuration space access -- cgit v0.10.2 From ea143604c5c8426923bbed7cd389fdaed7d58a2e Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 14 Feb 2012 18:23:39 +0800 Subject: ACPICA: ACPI 5: Update debug output for new notify values Add new notify values, add support for "hardware specific" notifies. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown diff --git a/drivers/acpi/acpica/evmisc.c b/drivers/acpi/acpica/evmisc.c index 0912f62..51ef9f5 100644 --- a/drivers/acpi/acpica/evmisc.c +++ b/drivers/acpi/acpica/evmisc.c @@ -108,27 +108,30 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node * node, ACPI_FUNCTION_NAME(ev_queue_notify_request); /* - * For value 3 (Ejection Request), some device method may need to be run. - * For value 2 (Device Wake) if _PRW exists, the _PS0 method may need - * to be run. + * For value 0x03 (Ejection Request), may need to run a device method. + * For value 0x02 (Device Wake), if _PRW exists, may need to run + * the _PS0 method. * For value 0x80 (Status Change) on the power button or sleep button, - * initiate soft-off or sleep operation? + * initiate soft-off or sleep operation. + * + * For all cases, simply dispatch the notify to the handler. */ ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Dispatching Notify on [%4.4s] Node %p Value 0x%2.2X (%s)\n", - acpi_ut_get_node_name(node), node, notify_value, - acpi_ut_get_notify_name(notify_value))); + "Dispatching Notify on [%4.4s] (%s) Value 0x%2.2X (%s) Node %p\n", + acpi_ut_get_node_name(node), + acpi_ut_get_type_name(node->type), notify_value, + acpi_ut_get_notify_name(notify_value), node)); /* Get the notify object attached to the NS Node */ obj_desc = acpi_ns_get_attached_object(node); if (obj_desc) { - /* We have the notify object, Get the right handler */ + /* We have the notify object, Get the correct handler */ switch (node->type) { - /* Notify allowed only on these types */ + /* Notify is allowed only on these types */ case ACPI_TYPE_DEVICE: case ACPI_TYPE_THERMAL: @@ -152,7 +155,7 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node * node, } /* - * If there is any handler to run, schedule the dispatcher. + * If there is a handler to run, schedule the dispatcher. * Check for: * 1) Global system notify handler * 2) Global device notify handler diff --git a/drivers/acpi/acpica/utdecode.c b/drivers/acpi/acpica/utdecode.c index d42ede52..6848499 100644 --- a/drivers/acpi/acpica/utdecode.c +++ b/drivers/acpi/acpica/utdecode.c @@ -497,19 +497,20 @@ char *acpi_ut_get_mutex_name(u32 mutex_id) /* Names for Notify() values, used for debug output */ -static const char *acpi_gbl_notify_value_names[] = { - "Bus Check", - "Device Check", - "Device Wake", - "Eject Request", - "Device Check Light", - "Frequency Mismatch", - "Bus Mode Mismatch", - "Power Fault", - "Capabilities Check", - "Device PLD Check", - "Reserved", - "System Locality Update" +static const char *acpi_gbl_notify_value_names[ACPI_NOTIFY_MAX + 1] = { + /* 00 */ "Bus Check", + /* 01 */ "Device Check", + /* 02 */ "Device Wake", + /* 03 */ "Eject Request", + /* 04 */ "Device Check Light", + /* 05 */ "Frequency Mismatch", + /* 06 */ "Bus Mode Mismatch", + /* 07 */ "Power Fault", + /* 08 */ "Capabilities Check", + /* 09 */ "Device PLD Check", + /* 10 */ "Reserved", + /* 11 */ "System Locality Update", + /* 12 */ "Shutdown Request" }; const char *acpi_ut_get_notify_name(u32 notify_value) @@ -519,9 +520,10 @@ const char *acpi_ut_get_notify_name(u32 notify_value) return (acpi_gbl_notify_value_names[notify_value]); } else if (notify_value <= ACPI_MAX_SYS_NOTIFY) { return ("Reserved"); - } else { /* Greater or equal to 0x80 */ - - return ("**Device Specific**"); + } else if (notify_value <= ACPI_MAX_DEVICE_SPECIFIC_NOTIFY) { + return ("Device Specific"); + } else { + return ("Hardware Specific"); } } #endif diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index d5dee7c..48c4d5f 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -532,8 +532,9 @@ typedef u64 acpi_integer; #define ACPI_NOTIFY_DEVICE_PLD_CHECK (u8) 0x09 #define ACPI_NOTIFY_RESERVED (u8) 0x0A #define ACPI_NOTIFY_LOCALITY_UPDATE (u8) 0x0B +#define ACPI_NOTIFY_SHUTDOWN_REQUEST (u8) 0x0C -#define ACPI_NOTIFY_MAX 0x0B +#define ACPI_NOTIFY_MAX 0x0C /* * Types associated with ACPI names and objects. The first group of @@ -698,7 +699,8 @@ typedef u32 acpi_event_status; #define ACPI_ALL_NOTIFY (ACPI_SYSTEM_NOTIFY | ACPI_DEVICE_NOTIFY) #define ACPI_MAX_NOTIFY_HANDLER_TYPE 0x3 -#define ACPI_MAX_SYS_NOTIFY 0x7f +#define ACPI_MAX_SYS_NOTIFY 0x7F +#define ACPI_MAX_DEVICE_SPECIFIC_NOTIFY 0xBF /* Address Space (Operation Region) Types */ -- cgit v0.10.2 From f7b004a17c9183f023796dea0d70284684ec000d Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 14 Feb 2012 18:31:56 +0800 Subject: ACPICA: Add acpi_os_physical_table_override interface This interface allows the host to override a table via a physical address, instead of the logical address required by acpi_os_table_override. This simplifies the host implementation. Initial implementation by Thomas Renninger. ACPICA implementation creates a single function for table overrides that attempts both a logical and a physical override. Signed-off-by: Bob Moore Signed-off-by: Thomas Renninger Signed-off-by: Lin Ming Signed-off-by: Len Brown diff --git a/drivers/acpi/acpica/actables.h b/drivers/acpi/acpica/actables.h index d5bec30..6712965 100644 --- a/drivers/acpi/acpica/actables.h +++ b/drivers/acpi/acpica/actables.h @@ -67,6 +67,11 @@ acpi_status acpi_tb_resize_root_table_list(void); acpi_status acpi_tb_verify_table(struct acpi_table_desc *table_desc); +struct acpi_table_header *acpi_tb_table_override(struct acpi_table_header + *table_header, + struct acpi_table_desc + *table_desc); + acpi_status acpi_tb_add_table(struct acpi_table_desc *table_desc, u32 *table_index); diff --git a/drivers/acpi/acpica/tbinstal.c b/drivers/acpi/acpica/tbinstal.c index 1aecf7b..c03500b 100644 --- a/drivers/acpi/acpica/tbinstal.c +++ b/drivers/acpi/acpica/tbinstal.c @@ -114,7 +114,6 @@ acpi_tb_add_table(struct acpi_table_desc *table_desc, u32 *table_index) { u32 i; acpi_status status = AE_OK; - struct acpi_table_header *override_table = NULL; ACPI_FUNCTION_TRACE(tb_add_table); @@ -224,25 +223,10 @@ acpi_tb_add_table(struct acpi_table_desc *table_desc, u32 *table_index) /* * ACPI Table Override: * Allow the host to override dynamically loaded tables. + * NOTE: the table is fully mapped at this point, and the mapping will + * be deleted by tb_table_override if the table is actually overridden. */ - status = acpi_os_table_override(table_desc->pointer, &override_table); - if (ACPI_SUCCESS(status) && override_table) { - ACPI_INFO((AE_INFO, - "%4.4s @ 0x%p Table override, replaced with:", - table_desc->pointer->signature, - ACPI_CAST_PTR(void, table_desc->address))); - - /* We can delete the table that was passed as a parameter */ - - acpi_tb_delete_table(table_desc); - - /* Setup descriptor for the new table */ - - table_desc->address = ACPI_PTR_TO_PHYSADDR(override_table); - table_desc->pointer = override_table; - table_desc->length = override_table->length; - table_desc->flags = ACPI_TABLE_ORIGIN_OVERRIDE; - } + (void)acpi_tb_table_override(table_desc->pointer, table_desc); /* Add the table to the global root table list */ @@ -263,6 +247,95 @@ acpi_tb_add_table(struct acpi_table_desc *table_desc, u32 *table_index) /******************************************************************************* * + * FUNCTION: acpi_tb_table_override + * + * PARAMETERS: table_header - Header for the original table + * table_desc - Table descriptor initialized for the + * original table. May or may not be mapped. + * + * RETURN: Pointer to the entire new table. NULL if table not overridden. + * If overridden, installs the new table within the input table + * descriptor. + * + * DESCRIPTION: Attempt table override by calling the OSL override functions. + * Note: If the table is overridden, then the entire new table + * is mapped and returned by this function. + * + ******************************************************************************/ + +struct acpi_table_header *acpi_tb_table_override(struct acpi_table_header + *table_header, + struct acpi_table_desc + *table_desc) +{ + acpi_status status; + struct acpi_table_header *new_table = NULL; + acpi_physical_address new_address = 0; + u32 new_table_length = 0; + u8 new_flags; + char *override_type; + + /* (1) Attempt logical override (returns a logical address) */ + + status = acpi_os_table_override(table_header, &new_table); + if (ACPI_SUCCESS(status) && new_table) { + new_address = ACPI_PTR_TO_PHYSADDR(new_table); + new_table_length = new_table->length; + new_flags = ACPI_TABLE_ORIGIN_OVERRIDE; + override_type = "Logical"; + goto finish_override; + } + + /* (2) Attempt physical override (returns a physical address) */ + + status = acpi_os_physical_table_override(table_header, + &new_address, + &new_table_length); + if (ACPI_SUCCESS(status) && new_address && new_table_length) { + + /* Map the entire new table */ + + new_table = acpi_os_map_memory(new_address, new_table_length); + if (!new_table) { + ACPI_EXCEPTION((AE_INFO, AE_NO_MEMORY, + "%4.4s %p Attempted physical table override failed", + table_header->signature, + ACPI_CAST_PTR(void, + table_desc->address))); + return (NULL); + } + + override_type = "Physical"; + new_flags = ACPI_TABLE_ORIGIN_MAPPED; + goto finish_override; + } + + return (NULL); /* There was no override */ + + finish_override: + + ACPI_INFO((AE_INFO, + "%4.4s %p %s table override, new table: %p", + table_header->signature, + ACPI_CAST_PTR(void, table_desc->address), + override_type, new_table)); + + /* We can now unmap/delete the original table (if fully mapped) */ + + acpi_tb_delete_table(table_desc); + + /* Setup descriptor for the new table */ + + table_desc->address = new_address; + table_desc->pointer = new_table; + table_desc->length = new_table_length; + table_desc->flags = new_flags; + + return (new_table); +} + +/******************************************************************************* + * * FUNCTION: acpi_tb_resize_root_table_list * * PARAMETERS: None @@ -396,7 +469,11 @@ void acpi_tb_delete_table(struct acpi_table_desc *table_desc) case ACPI_TABLE_ORIGIN_ALLOCATED: ACPI_FREE(table_desc->pointer); break; - default:; + + /* Not mapped or allocated, there is nothing we can do */ + + default: + return; } table_desc->pointer = NULL; diff --git a/drivers/acpi/acpica/tbutils.c b/drivers/acpi/acpica/tbutils.c index 1347c08..0a706ca 100644 --- a/drivers/acpi/acpica/tbutils.c +++ b/drivers/acpi/acpica/tbutils.c @@ -446,7 +446,7 @@ struct acpi_table_header *acpi_tb_copy_dsdt(u32 table_index) * RETURN: None * * DESCRIPTION: Install an ACPI table into the global data structure. The - * table override mechanism is implemented here to allow the host + * table override mechanism is called to allow the host * OS to replace any table before it is installed in the root * table array. * @@ -456,11 +456,9 @@ void acpi_tb_install_table(acpi_physical_address address, char *signature, u32 table_index) { - u8 flags; - acpi_status status; - struct acpi_table_header *table_to_install; - struct acpi_table_header *mapped_table; - struct acpi_table_header *override_table = NULL; + struct acpi_table_header *table; + struct acpi_table_header *final_table; + struct acpi_table_desc *table_desc; if (!address) { ACPI_ERROR((AE_INFO, @@ -471,69 +469,78 @@ acpi_tb_install_table(acpi_physical_address address, /* Map just the table header */ - mapped_table = - acpi_os_map_memory(address, sizeof(struct acpi_table_header)); - if (!mapped_table) { + table = acpi_os_map_memory(address, sizeof(struct acpi_table_header)); + if (!table) { + ACPI_ERROR((AE_INFO, + "Could not map memory for table [%s] at %p", + signature, ACPI_CAST_PTR(void, address))); return; } /* If a particular signature is expected (DSDT/FACS), it must match */ - if (signature && !ACPI_COMPARE_NAME(mapped_table->signature, signature)) { + if (signature && !ACPI_COMPARE_NAME(table->signature, signature)) { ACPI_ERROR((AE_INFO, "Invalid signature 0x%X for ACPI table, expected [%s]", - *ACPI_CAST_PTR(u32, mapped_table->signature), - signature)); + *ACPI_CAST_PTR(u32, table->signature), signature)); goto unmap_and_exit; } /* + * Initialize the table entry. Set the pointer to NULL, since the + * table is not fully mapped at this time. + */ + table_desc = &acpi_gbl_root_table_list.tables[table_index]; + + table_desc->address = address; + table_desc->pointer = NULL; + table_desc->length = table->length; + table_desc->flags = ACPI_TABLE_ORIGIN_MAPPED; + ACPI_MOVE_32_TO_32(table_desc->signature.ascii, table->signature); + + /* * ACPI Table Override: * * Before we install the table, let the host OS override it with a new * one if desired. Any table within the RSDT/XSDT can be replaced, * including the DSDT which is pointed to by the FADT. + * + * NOTE: If the table is overridden, then final_table will contain a + * mapped pointer to the full new table. If the table is not overridden, + * or if there has been a physical override, then the table will be + * fully mapped later (in verify table). In any case, we must + * unmap the header that was mapped above. */ - status = acpi_os_table_override(mapped_table, &override_table); - if (ACPI_SUCCESS(status) && override_table) { - ACPI_INFO((AE_INFO, - "%4.4s @ 0x%p Table override, replaced with:", - mapped_table->signature, ACPI_CAST_PTR(void, - address))); - - acpi_gbl_root_table_list.tables[table_index].pointer = - override_table; - address = ACPI_PTR_TO_PHYSADDR(override_table); - - table_to_install = override_table; - flags = ACPI_TABLE_ORIGIN_OVERRIDE; - } else { - table_to_install = mapped_table; - flags = ACPI_TABLE_ORIGIN_MAPPED; + final_table = acpi_tb_table_override(table, table_desc); + if (!final_table) { + final_table = table; /* There was no override */ } - /* Initialize the table entry */ + acpi_tb_print_table_header(table_desc->address, final_table); - acpi_gbl_root_table_list.tables[table_index].address = address; - acpi_gbl_root_table_list.tables[table_index].length = - table_to_install->length; - acpi_gbl_root_table_list.tables[table_index].flags = flags; - - ACPI_MOVE_32_TO_32(& - (acpi_gbl_root_table_list.tables[table_index]. - signature), table_to_install->signature); - - acpi_tb_print_table_header(address, table_to_install); + /* Set the global integer width (based upon revision of the DSDT) */ if (table_index == ACPI_TABLE_INDEX_DSDT) { + acpi_ut_set_integer_width(final_table->revision); + } - /* Global integer width is based upon revision of the DSDT */ - - acpi_ut_set_integer_width(table_to_install->revision); + /* + * If we have a physical override during this early loading of the ACPI + * tables, unmap the table for now. It will be mapped again later when + * it is actually used. This supports very early loading of ACPI tables, + * before virtual memory is fully initialized and running within the + * host OS. Note: A logical override has the ACPI_TABLE_ORIGIN_OVERRIDE + * flag set and will not be deleted below. + */ + if (final_table != table) { + acpi_tb_delete_table(table_desc); } unmap_and_exit: - acpi_os_unmap_memory(mapped_table, sizeof(struct acpi_table_header)); + + /* Always unmap the table header that we mapped above */ + + acpi_os_unmap_memory(table, sizeof(struct acpi_table_header)); } /******************************************************************************* diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 1dea025..07d4264 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -554,6 +554,15 @@ acpi_os_table_override(struct acpi_table_header * existing_table, return AE_OK; } +acpi_status +acpi_os_physical_table_override(struct acpi_table_header *existing_table, + acpi_physical_address * new_address, + u32 *new_table_length) +{ + return AE_SUPPORT; +} + + static irqreturn_t acpi_irq(int irq, void *dev_id) { u32 handled; diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h index 1cd2204..21a5548 100644 --- a/include/acpi/acpiosxf.h +++ b/include/acpi/acpiosxf.h @@ -95,6 +95,11 @@ acpi_status acpi_os_table_override(struct acpi_table_header *existing_table, struct acpi_table_header **new_table); +acpi_status +acpi_os_physical_table_override(struct acpi_table_header *existing_table, + acpi_physical_address * new_address, + u32 *new_table_length); + /* * Spinlock primitives */ -- cgit v0.10.2 From f99648b1aff8b6158333a06c50d627be3c243a32 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 14 Feb 2012 18:43:03 +0800 Subject: ACPICA: Distill multiple sleep method functions to a single function Adds acpi_hw_execute_sleep_method to handle the various sleep methods such as _GTS, _BFS, _WAK, and _SST. Removes the specialized functions previously used for each of these methods. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h index eed204a..d3f62a8 100644 --- a/drivers/acpi/acpica/achware.h +++ b/drivers/acpi/acpica/achware.h @@ -83,7 +83,7 @@ acpi_status acpi_hw_clear_acpi_status(void); /* * hwsleep - sleep/wake support */ -void acpi_hw_execute_SST(u32 value); +void acpi_hw_execute_sleep_method(char *method_name, u32 integer_argument); acpi_status acpi_hw_extended_sleep(u8 sleep_state); diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c index fa34147..abe65ff 100644 --- a/drivers/acpi/acpica/hwsleep.c +++ b/drivers/acpi/acpica/hwsleep.c @@ -49,13 +49,6 @@ #define _COMPONENT ACPI_HARDWARE ACPI_MODULE_NAME("hwsleep") -/* Local prototypes */ -static void acpi_hw_execute_GTS(u8 sleep_state); - -static void acpi_hw_execute_BFS(u8 sleep_state); - -static void acpi_hw_execute_WAK(u8 sleep_state); - static unsigned int gts, bfs; module_param(gts, uint, 0644); module_param(bfs, uint, 0644); @@ -64,137 +57,45 @@ MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".); /******************************************************************************* * - * FUNCTION: acpi_hw_execute_GTS + * FUNCTION: acpi_hw_execute_sleep_method * - * PARAMETERS: sleep_state - Sleep state that will be entered + * PARAMETERS: method_name - Pathname of method to execute + * integer_argument - Argument to pass to the method * * RETURN: None * - * DESCRIPTION: Execute the optional _GTS method (Going To Sleep) + * DESCRIPTION: Execute a sleep/wake related method, with one integer argument + * and no return value. * ******************************************************************************/ - -static void acpi_hw_execute_GTS(u8 sleep_state) +void acpi_hw_execute_sleep_method(char *method_name, u32 integer_argument) { struct acpi_object_list arg_list; union acpi_object arg; acpi_status status; - if (!gts) - return; + ACPI_FUNCTION_TRACE(hw_execute_sleep_method); - /* One argument, sleep_state */ + if (!ACPI_STRCMP(METHOD_NAME__GTS, method_name) && !gts) + return_VOID; - arg_list.count = 1; - arg_list.pointer = &arg; - arg.type = ACPI_TYPE_INTEGER; - arg.integer.value = sleep_state; + if (!ACPI_STRCMP(METHOD_NAME__BFS, method_name) && !bfs) + return_VOID; - status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_EXCEPTION((AE_INFO, status, - "While executing method _GTS")); - } -} - -/******************************************************************************* - * - * FUNCTION: acpi_hw_execute_BFS - * - * PARAMETERS: sleep_state - Which sleep state we just exited - * - * RETURN: None - * - * DESCRIPTION: Execute the optional _BFS method (Back From Sleep) - * - ******************************************************************************/ - -static void acpi_hw_execute_BFS(u8 sleep_state) -{ - struct acpi_object_list arg_list; - union acpi_object arg; - acpi_status status; - - if (!bfs) - return; - - /* One argument, sleep_state */ + /* One argument, integer_argument */ arg_list.count = 1; arg_list.pointer = &arg; arg.type = ACPI_TYPE_INTEGER; - arg.integer.value = sleep_state; + arg.integer.value = (u64)integer_argument; - status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL); + status = acpi_evaluate_object(NULL, method_name, &arg_list, NULL); if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_EXCEPTION((AE_INFO, status, - "While executing method _BFS")); + ACPI_EXCEPTION((AE_INFO, status, "While executing method %s", + method_name)); } -} -/******************************************************************************* - * - * FUNCTION: acpi_hw_execute_WAK - * - * PARAMETERS: sleep_state - Which sleep state we just exited - * - * RETURN: None - * - * DESCRIPTION: Execute the _WAK method (System Wake) - * - ******************************************************************************/ - -static void acpi_hw_execute_WAK(u8 sleep_state) -{ - struct acpi_object_list arg_list; - union acpi_object arg; - acpi_status status; - - /* One argument, sleep_state */ - - arg_list.count = 1; - arg_list.pointer = &arg; - arg.type = ACPI_TYPE_INTEGER; - arg.integer.value = sleep_state; - - status = acpi_evaluate_object(NULL, METHOD_NAME__WAK, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_EXCEPTION((AE_INFO, status, - "While executing method _WAK")); - } - /* TBD: _WAK "sometimes" returns stuff - do we want to look at it? */ -} - -/******************************************************************************* - * - * FUNCTION: acpi_hw_execute_SST - * - * PARAMETERS: indicator_id - Value to be passed to the _SST method - * - * RETURN: None - * - * DESCRIPTION: Execute the optional _SST method (System Status) - * - ******************************************************************************/ - -void acpi_hw_execute_SST(u32 indicator_id) -{ - struct acpi_object_list arg_list; - union acpi_object arg; - acpi_status status; - - /* One argument, status indicator ID */ - - arg_list.count = 1; - arg_list.pointer = &arg; - arg.type = ACPI_TYPE_INTEGER; - - arg.integer.value = indicator_id; - status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_EXCEPTION((AE_INFO, status, - "While executing method _SST")); - } + return_VOID; } #if (!ACPI_REDUCED_HARDWARE) @@ -271,7 +172,7 @@ acpi_status acpi_hw_legacy_sleep(u8 sleep_state) /* Execute the _GTS method (Going To Sleep) */ - acpi_hw_execute_GTS(sleep_state); + acpi_hw_execute_sleep_method(METHOD_NAME__GTS, sleep_state); /* Get current value of PM1A control */ @@ -427,7 +328,7 @@ acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state) } } - acpi_hw_execute_BFS(sleep_state); + acpi_hw_execute_sleep_method(METHOD_NAME__BFS, sleep_state); return_ACPI_STATUS(status); } @@ -453,7 +354,7 @@ acpi_status acpi_hw_legacy_wake(u8 sleep_state) /* Ensure enter_sleep_state_prep -> enter_sleep_state ordering */ acpi_gbl_sleep_type_a = ACPI_SLEEP_TYPE_INVALID; - acpi_hw_execute_SST(ACPI_SST_WAKING); + acpi_hw_execute_sleep_method(METHOD_NAME__SST, ACPI_SST_WAKING); /* * GPEs must be enabled before _WAK is called as GPEs @@ -477,7 +378,7 @@ acpi_status acpi_hw_legacy_wake(u8 sleep_state) * Now we can execute _WAK, etc. Some machines require that the GPEs * are enabled before the wake methods are executed. */ - acpi_hw_execute_WAK(sleep_state); + acpi_hw_execute_sleep_method(METHOD_NAME__WAK, sleep_state); /* * Some BIOS code assumes that WAK_STS will be cleared on resume @@ -509,7 +410,7 @@ acpi_status acpi_hw_legacy_wake(u8 sleep_state) return_ACPI_STATUS(status); } - acpi_hw_execute_SST(ACPI_SST_WORKING); + acpi_hw_execute_sleep_method(METHOD_NAME__SST, ACPI_SST_WORKING); return_ACPI_STATUS(status); } @@ -555,7 +456,7 @@ acpi_status acpi_hw_extended_sleep(u8 sleep_state) /* Execute the _GTS method (Going To Sleep) */ - acpi_hw_execute_GTS(sleep_state); + acpi_hw_execute_sleep_method(METHOD_NAME__GTS, sleep_state); /* Flush caches, as per ACPI specification */ @@ -625,7 +526,7 @@ acpi_status acpi_hw_extended_wake_prep(u8 sleep_state) &acpi_gbl_FADT.sleep_control); } - acpi_hw_execute_BFS(sleep_state); + acpi_hw_execute_sleep_method(METHOD_NAME__BFS, sleep_state); return_ACPI_STATUS(AE_OK); } @@ -652,8 +553,8 @@ acpi_status acpi_hw_extended_wake(u8 sleep_state) /* Execute the wake methods */ - acpi_hw_execute_SST(ACPI_SST_WAKING); - acpi_hw_execute_WAK(sleep_state); + acpi_hw_execute_sleep_method(METHOD_NAME__SST, ACPI_SST_WAKING); + acpi_hw_execute_sleep_method(METHOD_NAME__WAK, sleep_state); /* * Some BIOS code assumes that WAK_STS will be cleared on resume @@ -663,6 +564,6 @@ acpi_status acpi_hw_extended_wake(u8 sleep_state) (void)acpi_write(ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status); acpi_gbl_system_awake_and_running = TRUE; - acpi_hw_execute_SST(ACPI_SST_WORKING); + acpi_hw_execute_sleep_method(METHOD_NAME__SST, ACPI_SST_WORKING); return_ACPI_STATUS(AE_OK); } diff --git a/drivers/acpi/acpica/hwxfsleep.c b/drivers/acpi/acpica/hwxfsleep.c index d599961..ff20558 100644 --- a/drivers/acpi/acpica/hwxfsleep.c +++ b/drivers/acpi/acpica/hwxfsleep.c @@ -261,7 +261,7 @@ acpi_status acpi_enter_sleep_state_prep(u8 sleep_state) * Set the system indicators to show the desired sleep state. * _SST is an optional method (return no error if not found) */ - acpi_hw_execute_SST(sst_value); + acpi_hw_execute_sleep_method(METHOD_NAME__SST, sst_value); return_ACPI_STATUS(AE_OK); } -- cgit v0.10.2 From 709585765734e90d9fe0a2dc9c6f4e49eff5c6ec Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 14 Feb 2012 18:47:42 +0800 Subject: ACPICA: Split sleep/wake functions into two files The functions for the original/legacy sleep/wake registers are in hwsleep.c, and the functions for the new extended FADT V5 sleep registers are in hwesleep.c Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile index da55180..793b8cc 100644 --- a/drivers/acpi/acpica/Makefile +++ b/drivers/acpi/acpica/Makefile @@ -68,6 +68,7 @@ acpi-y += \ acpi-y += \ hwacpi.o \ + hwesleep.o \ hwgpe.o \ hwpci.o \ hwregs.o \ diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h index d3f62a8..5de4ec7 100644 --- a/drivers/acpi/acpica/achware.h +++ b/drivers/acpi/acpica/achware.h @@ -81,22 +81,25 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value); acpi_status acpi_hw_clear_acpi_status(void); /* - * hwsleep - sleep/wake support + * hwsleep - sleep/wake support (Legacy sleep registers) + */ +acpi_status acpi_hw_legacy_sleep(u8 sleep_state); + +acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state); + +acpi_status acpi_hw_legacy_wake(u8 sleep_state); + +/* + * hwesleep - sleep/wake support (Extended FADT-V5 sleep registers) */ void acpi_hw_execute_sleep_method(char *method_name, u32 integer_argument); acpi_status acpi_hw_extended_sleep(u8 sleep_state); -acpi_status acpi_hw_legacy_sleep(u8 sleep_state); - acpi_status acpi_hw_extended_wake_prep(u8 sleep_state); acpi_status acpi_hw_extended_wake(u8 sleep_state); -acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state); - -acpi_status acpi_hw_legacy_wake(u8 sleep_state); - /* * hwvalid - Port I/O with validation */ diff --git a/drivers/acpi/acpica/hwesleep.c b/drivers/acpi/acpica/hwesleep.c new file mode 100644 index 0000000..9e44c6c --- /dev/null +++ b/drivers/acpi/acpica/hwesleep.c @@ -0,0 +1,251 @@ +/****************************************************************************** + * + * Name: hwesleep.c - ACPI Hardware Sleep/Wake Support functions for the + * extended FADT-V5 sleep registers. + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2012, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include +#include "accommon.h" +#include + +#define _COMPONENT ACPI_HARDWARE +ACPI_MODULE_NAME("hwesleep") + +static unsigned int gts, bfs; +module_param(gts, uint, 0644); +module_param(bfs, uint, 0644); +MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend."); +MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".); + +/******************************************************************************* + * + * FUNCTION: acpi_hw_execute_sleep_method + * + * PARAMETERS: method_name - Pathname of method to execute + * integer_argument - Argument to pass to the method + * + * RETURN: None + * + * DESCRIPTION: Execute a sleep/wake related method with one integer argument + * and no return value. + * + ******************************************************************************/ +void acpi_hw_execute_sleep_method(char *method_name, u32 integer_argument) +{ + struct acpi_object_list arg_list; + union acpi_object arg; + acpi_status status; + + ACPI_FUNCTION_TRACE(hw_execute_sleep_method); + + if (!ACPI_STRCMP(METHOD_NAME__GTS, method_name) && !gts) + return_VOID; + + if (!ACPI_STRCMP(METHOD_NAME__BFS, method_name) && !bfs) + return_VOID; + + /* One argument, integer_argument; No return value expected */ + + arg_list.count = 1; + arg_list.pointer = &arg; + arg.type = ACPI_TYPE_INTEGER; + arg.integer.value = (u64)integer_argument; + + status = acpi_evaluate_object(NULL, method_name, &arg_list, NULL); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + ACPI_EXCEPTION((AE_INFO, status, "While executing method %s", + method_name)); + } + + return_VOID; +} + +/******************************************************************************* + * + * FUNCTION: acpi_hw_extended_sleep + * + * PARAMETERS: sleep_state - Which sleep state to enter + * + * RETURN: Status + * + * DESCRIPTION: Enter a system sleep state via the extended FADT sleep + * registers (V5 FADT). + * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED + * + ******************************************************************************/ + +acpi_status acpi_hw_extended_sleep(u8 sleep_state) +{ + acpi_status status; + u8 sleep_type_value; + u64 sleep_status; + + ACPI_FUNCTION_TRACE(hw_extended_sleep); + + /* Extended sleep registers must be valid */ + + if (!acpi_gbl_FADT.sleep_control.address || + !acpi_gbl_FADT.sleep_status.address) { + return_ACPI_STATUS(AE_NOT_EXIST); + } + + /* Clear wake status (WAK_STS) */ + + status = acpi_write(ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + acpi_gbl_system_awake_and_running = FALSE; + + /* Execute the _GTS method (Going To Sleep) */ + + acpi_hw_execute_sleep_method(METHOD_NAME__GTS, sleep_state); + + /* Flush caches, as per ACPI specification */ + + ACPI_FLUSH_CPU_CACHE(); + + /* + * Set the SLP_TYP and SLP_EN bits. + * + * Note: We only use the first value returned by the \_Sx method + * (acpi_gbl_sleep_type_a) - As per ACPI specification. + */ + ACPI_DEBUG_PRINT((ACPI_DB_INIT, + "Entering sleep state [S%u]\n", sleep_state)); + + sleep_type_value = + ((acpi_gbl_sleep_type_a << ACPI_X_SLEEP_TYPE_POSITION) & + ACPI_X_SLEEP_TYPE_MASK); + + status = acpi_write((sleep_type_value | ACPI_X_SLEEP_ENABLE), + &acpi_gbl_FADT.sleep_control); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Wait for transition back to Working State */ + + do { + status = acpi_read(&sleep_status, &acpi_gbl_FADT.sleep_status); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + } while (!(((u8)sleep_status) & ACPI_X_WAKE_STATUS)); + + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_hw_extended_wake_prep + * + * PARAMETERS: sleep_state - Which sleep state we just exited + * + * RETURN: Status + * + * DESCRIPTION: Perform first part of OS-independent ACPI cleanup after + * a sleep. Called with interrupts ENABLED. + * + ******************************************************************************/ + +acpi_status acpi_hw_extended_wake_prep(u8 sleep_state) +{ + acpi_status status; + u8 sleep_type_value; + + ACPI_FUNCTION_TRACE(hw_extended_wake_prep); + + status = acpi_get_sleep_type_data(ACPI_STATE_S0, + &acpi_gbl_sleep_type_a, + &acpi_gbl_sleep_type_b); + if (ACPI_SUCCESS(status)) { + sleep_type_value = + ((acpi_gbl_sleep_type_a << ACPI_X_SLEEP_TYPE_POSITION) & + ACPI_X_SLEEP_TYPE_MASK); + + (void)acpi_write((sleep_type_value | ACPI_X_SLEEP_ENABLE), + &acpi_gbl_FADT.sleep_control); + } + + acpi_hw_execute_sleep_method(METHOD_NAME__BFS, sleep_state); + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_hw_extended_wake + * + * PARAMETERS: sleep_state - Which sleep state we just exited + * + * RETURN: Status + * + * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep + * Called with interrupts ENABLED. + * + ******************************************************************************/ + +acpi_status acpi_hw_extended_wake(u8 sleep_state) +{ + ACPI_FUNCTION_TRACE(hw_extended_wake); + + /* Ensure enter_sleep_state_prep -> enter_sleep_state ordering */ + + acpi_gbl_sleep_type_a = ACPI_SLEEP_TYPE_INVALID; + + /* Execute the wake methods */ + + acpi_hw_execute_sleep_method(METHOD_NAME__SST, ACPI_SST_WAKING); + acpi_hw_execute_sleep_method(METHOD_NAME__WAK, sleep_state); + + /* + * Some BIOS code assumes that WAK_STS will be cleared on resume + * and use it to determine whether the system is rebooting or + * resuming. Clear WAK_STS for compatibility. + */ + (void)acpi_write(ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status); + acpi_gbl_system_awake_and_running = TRUE; + + acpi_hw_execute_sleep_method(METHOD_NAME__SST, ACPI_SST_WORKING); + return_ACPI_STATUS(AE_OK); +} diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c index abe65ff..b96d41b 100644 --- a/drivers/acpi/acpica/hwsleep.c +++ b/drivers/acpi/acpica/hwsleep.c @@ -1,6 +1,7 @@ /****************************************************************************** * - * Name: hwsleep.c - ACPI Hardware Sleep/Wake Support Functions + * Name: hwsleep.c - ACPI Hardware Sleep/Wake Support functions for the + * original/legacy sleep/PM registers. * *****************************************************************************/ @@ -49,56 +50,7 @@ #define _COMPONENT ACPI_HARDWARE ACPI_MODULE_NAME("hwsleep") -static unsigned int gts, bfs; -module_param(gts, uint, 0644); -module_param(bfs, uint, 0644); -MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend."); -MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".); - -/******************************************************************************* - * - * FUNCTION: acpi_hw_execute_sleep_method - * - * PARAMETERS: method_name - Pathname of method to execute - * integer_argument - Argument to pass to the method - * - * RETURN: None - * - * DESCRIPTION: Execute a sleep/wake related method, with one integer argument - * and no return value. - * - ******************************************************************************/ -void acpi_hw_execute_sleep_method(char *method_name, u32 integer_argument) -{ - struct acpi_object_list arg_list; - union acpi_object arg; - acpi_status status; - - ACPI_FUNCTION_TRACE(hw_execute_sleep_method); - - if (!ACPI_STRCMP(METHOD_NAME__GTS, method_name) && !gts) - return_VOID; - - if (!ACPI_STRCMP(METHOD_NAME__BFS, method_name) && !bfs) - return_VOID; - - /* One argument, integer_argument */ - - arg_list.count = 1; - arg_list.pointer = &arg; - arg.type = ACPI_TYPE_INTEGER; - arg.integer.value = (u64)integer_argument; - - status = acpi_evaluate_object(NULL, method_name, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_EXCEPTION((AE_INFO, status, "While executing method %s", - method_name)); - } - - return_VOID; -} - -#if (!ACPI_REDUCED_HARDWARE) +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /******************************************************************************* * * FUNCTION: acpi_hw_legacy_sleep @@ -111,7 +63,6 @@ void acpi_hw_execute_sleep_method(char *method_name, u32 integer_argument) * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED * ******************************************************************************/ - acpi_status acpi_hw_legacy_sleep(u8 sleep_state) { struct acpi_bit_register_info *sleep_type_reg_info; @@ -415,155 +366,3 @@ acpi_status acpi_hw_legacy_wake(u8 sleep_state) } #endif /* !ACPI_REDUCED_HARDWARE */ - -/******************************************************************************* - * - * FUNCTION: acpi_hw_extended_sleep - * - * PARAMETERS: sleep_state - Which sleep state to enter - * - * RETURN: Status - * - * DESCRIPTION: Enter a system sleep state via the extended FADT sleep - * registers (V5 FADT). - * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED - * - ******************************************************************************/ - -acpi_status acpi_hw_extended_sleep(u8 sleep_state) -{ - acpi_status status; - u8 sleep_type_value; - u64 sleep_status; - - ACPI_FUNCTION_TRACE(hw_extended_sleep); - - /* Extended sleep registers must be valid */ - - if (!acpi_gbl_FADT.sleep_control.address || - !acpi_gbl_FADT.sleep_status.address) { - return_ACPI_STATUS(AE_NOT_EXIST); - } - - /* Clear wake status (WAK_STS) */ - - status = acpi_write(ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - acpi_gbl_system_awake_and_running = FALSE; - - /* Execute the _GTS method (Going To Sleep) */ - - acpi_hw_execute_sleep_method(METHOD_NAME__GTS, sleep_state); - - /* Flush caches, as per ACPI specification */ - - ACPI_FLUSH_CPU_CACHE(); - - /* - * Set the SLP_TYP and SLP_EN bits. - * - * Note: We only use the first value returned by the \_Sx method - * (acpi_gbl_sleep_type_a) - As per ACPI specification. - */ - ACPI_DEBUG_PRINT((ACPI_DB_INIT, - "Entering sleep state [S%u]\n", sleep_state)); - - sleep_type_value = - ((acpi_gbl_sleep_type_a << ACPI_X_SLEEP_TYPE_POSITION) & - ACPI_X_SLEEP_TYPE_MASK); - - status = acpi_write((sleep_type_value | ACPI_X_SLEEP_ENABLE), - &acpi_gbl_FADT.sleep_control); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Wait for transition back to Working State */ - - do { - status = acpi_read(&sleep_status, &acpi_gbl_FADT.sleep_status); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - } while (!(((u8)sleep_status) & ACPI_X_WAKE_STATUS)); - - return_ACPI_STATUS(AE_OK); -} - -/******************************************************************************* - * - * FUNCTION: acpi_hw_extended_wake_prep - * - * PARAMETERS: sleep_state - Which sleep state we just exited - * - * RETURN: Status - * - * DESCRIPTION: Perform first part of OS-independent ACPI cleanup after - * a sleep. Called with interrupts ENABLED. - * - ******************************************************************************/ - -acpi_status acpi_hw_extended_wake_prep(u8 sleep_state) -{ - acpi_status status; - u8 sleep_type_value; - - ACPI_FUNCTION_TRACE(hw_extended_wake_prep); - - status = acpi_get_sleep_type_data(ACPI_STATE_S0, - &acpi_gbl_sleep_type_a, - &acpi_gbl_sleep_type_b); - if (ACPI_SUCCESS(status)) { - sleep_type_value = - ((acpi_gbl_sleep_type_a << ACPI_X_SLEEP_TYPE_POSITION) & - ACPI_X_SLEEP_TYPE_MASK); - - (void)acpi_write((sleep_type_value | ACPI_X_SLEEP_ENABLE), - &acpi_gbl_FADT.sleep_control); - } - - acpi_hw_execute_sleep_method(METHOD_NAME__BFS, sleep_state); - return_ACPI_STATUS(AE_OK); -} - -/******************************************************************************* - * - * FUNCTION: acpi_hw_extended_wake - * - * PARAMETERS: sleep_state - Which sleep state we just exited - * - * RETURN: Status - * - * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep - * Called with interrupts ENABLED. - * - ******************************************************************************/ - -acpi_status acpi_hw_extended_wake(u8 sleep_state) -{ - ACPI_FUNCTION_TRACE(hw_extended_wake); - - /* Ensure enter_sleep_state_prep -> enter_sleep_state ordering */ - - acpi_gbl_sleep_type_a = ACPI_SLEEP_TYPE_INVALID; - - /* Execute the wake methods */ - - acpi_hw_execute_sleep_method(METHOD_NAME__SST, ACPI_SST_WAKING); - acpi_hw_execute_sleep_method(METHOD_NAME__WAK, sleep_state); - - /* - * Some BIOS code assumes that WAK_STS will be cleared on resume - * and use it to determine whether the system is rebooting or - * resuming. Clear WAK_STS for compatibility. - */ - (void)acpi_write(ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status); - acpi_gbl_system_awake_and_running = TRUE; - - acpi_hw_execute_sleep_method(METHOD_NAME__SST, ACPI_SST_WORKING); - return_ACPI_STATUS(AE_OK); -} -- cgit v0.10.2 From 72a8887a356076dfa39bd6691c52446f90a50480 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 14 Feb 2012 18:57:13 +0800 Subject: ACPICA: Add table-driven dispatch for sleep/wake functions Simplifies the code, especially the compile-time ACPI_REDUCED_HARDWARE option. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown diff --git a/drivers/acpi/acpica/acmacros.h b/drivers/acpi/acpica/acmacros.h index ef338a9..f119f47 100644 --- a/drivers/acpi/acpica/acmacros.h +++ b/drivers/acpi/acpica/acmacros.h @@ -516,6 +516,12 @@ #endif /* ACPI_DEBUG_OUTPUT */ +#if (!ACPI_REDUCED_HARDWARE) +#define ACPI_HW_OPTIONAL_FUNCTION(addr) addr +#else +#define ACPI_HW_OPTIONAL_FUNCTION(addr) NULL +#endif + /* * Some code only gets executed when the debugger is built in. * Note that this is entirely independent of whether the diff --git a/drivers/acpi/acpica/hwxfsleep.c b/drivers/acpi/acpica/hwxfsleep.c index ff20558..b711f97 100644 --- a/drivers/acpi/acpica/hwxfsleep.c +++ b/drivers/acpi/acpica/hwxfsleep.c @@ -48,6 +48,34 @@ #define _COMPONENT ACPI_HARDWARE ACPI_MODULE_NAME("hwxfsleep") +/* Local prototypes */ +static acpi_status acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id); + +/* + * Dispatch table used to efficiently branch to the various sleep + * functions. + */ +#define ACPI_SLEEP_FUNCTION 0 +#define ACPI_WAKE_PREP_FUNCTION 1 +#define ACPI_WAKE_FUNCTION 2 + +/* Legacy functions are optional, based upon ACPI_REDUCED_HARDWARE */ + +static struct acpi_sleep_functions acpi_sleep_dispatch[] = { + {ACPI_HW_OPTIONAL_FUNCTION(acpi_hw_legacy_sleep), + acpi_hw_extended_sleep}, + {ACPI_HW_OPTIONAL_FUNCTION(acpi_hw_legacy_wake_prep), + acpi_hw_extended_wake_prep}, + {ACPI_HW_OPTIONAL_FUNCTION(acpi_hw_legacy_wake), acpi_hw_extended_wake} +}; + +/* + * These functions are removed for the ACPI_REDUCED_HARDWARE case: + * acpi_set_firmware_waking_vector + * acpi_set_firmware_waking_vector64 + * acpi_enter_sleep_state_s4bios + */ + #if (!ACPI_REDUCED_HARDWARE) /******************************************************************************* * @@ -61,6 +89,7 @@ ACPI_MODULE_NAME("hwxfsleep") * DESCRIPTION: Sets the 32-bit firmware_waking_vector field of the FACS * ******************************************************************************/ + acpi_status acpi_set_firmware_waking_vector(u32 physical_address) { ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector); @@ -193,18 +222,65 @@ ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios) #endif /* !ACPI_REDUCED_HARDWARE */ /******************************************************************************* * + * FUNCTION: acpi_hw_sleep_dispatch + * + * PARAMETERS: sleep_state - Which sleep state to enter/exit + * function_id - Sleep, wake_prep, or Wake + * + * RETURN: Status from the invoked sleep handling function. + * + * DESCRIPTION: Dispatch a sleep/wake request to the appropriate handling + * function. + * + ******************************************************************************/ +static acpi_status acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id) +{ + acpi_status status; + struct acpi_sleep_functions *sleep_functions = + &acpi_sleep_dispatch[function_id]; + +#if (!ACPI_REDUCED_HARDWARE) + + /* + * If the Hardware Reduced flag is set (from the FADT), we must + * use the extended sleep registers + */ + if (acpi_gbl_reduced_hardware || acpi_gbl_FADT.sleep_control.address) { + status = sleep_functions->extended_function(sleep_state); + } else { + /* Legacy sleep */ + + status = sleep_functions->legacy_function(sleep_state); + } + + return (status); + +#else + /* + * For the case where reduced-hardware-only code is being generated, + * we know that only the extended sleep registers are available + */ + status = sleep_functions->extended_function(sleep_state); + return (status); + +#endif /* !ACPI_REDUCED_HARDWARE */ +} + +/******************************************************************************* + * * FUNCTION: acpi_enter_sleep_state_prep * * PARAMETERS: sleep_state - Which sleep state to enter * * RETURN: Status * - * DESCRIPTION: Prepare to enter a system sleep state (see ACPI 2.0 spec p 231) + * DESCRIPTION: Prepare to enter a system sleep state. * This function must execute with interrupts enabled. * We break sleeping into 2 stages so that OSPM can handle * various OS-specific tasks between the two steps. * ******************************************************************************/ + acpi_status acpi_enter_sleep_state_prep(u8 sleep_state) { acpi_status status; @@ -291,23 +367,8 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) acpi_gbl_sleep_type_a, acpi_gbl_sleep_type_b)); return_ACPI_STATUS(AE_AML_OPERAND_VALUE); } -#if (!ACPI_REDUCED_HARDWARE) - - /* If Hardware Reduced flag is set, must use the extended sleep registers */ - - if (acpi_gbl_reduced_hardware || acpi_gbl_FADT.sleep_control.address) { - status = acpi_hw_extended_sleep(sleep_state); - } else { - /* Legacy sleep */ - - status = acpi_hw_legacy_sleep(sleep_state); - } - -#else - status = acpi_hw_extended_sleep(sleep_state); - -#endif /* !ACPI_REDUCED_HARDWARE */ + status = acpi_hw_sleep_dispatch(sleep_state, ACPI_SLEEP_FUNCTION); return_ACPI_STATUS(status); } @@ -330,26 +391,9 @@ acpi_status acpi_leave_sleep_state_prep(u8 sleep_state) { acpi_status status; - ACPI_FUNCTION_TRACE(acpi_leave_sleep_state); - - -#if (!ACPI_REDUCED_HARDWARE) - - /* If Hardware Reduced flag is set, must use the extended sleep registers */ - - if (acpi_gbl_reduced_hardware || acpi_gbl_FADT.sleep_control.address) { - status = acpi_hw_extended_wake_prep(sleep_state); - } else { - /* Legacy sleep */ - - status = acpi_hw_legacy_wake_prep(sleep_state); - } -#else - status = acpi_hw_extended_wake_prep(sleep_state); - -#endif /* !ACPI_REDUCED_HARDWARE */ - + ACPI_FUNCTION_TRACE(acpi_leave_sleep_state_prep); + status = acpi_hw_sleep_dispatch(sleep_state, ACPI_WAKE_PREP_FUNCTION); return_ACPI_STATUS(status); } @@ -359,7 +403,7 @@ ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state_prep) * * FUNCTION: acpi_leave_sleep_state * - * PARAMETERS: sleep_state - Which sleep state we just exited + * PARAMETERS: sleep_state - Which sleep state we are exiting * * RETURN: Status * @@ -374,23 +418,7 @@ acpi_status acpi_leave_sleep_state(u8 sleep_state) ACPI_FUNCTION_TRACE(acpi_leave_sleep_state); -#if (!ACPI_REDUCED_HARDWARE) - - /* If Hardware Reduced flag is set, must use the extended sleep registers */ - - if (acpi_gbl_reduced_hardware || acpi_gbl_FADT.sleep_control.address) { - status = acpi_hw_extended_wake(sleep_state); - } else { - /* Legacy sleep */ - - status = acpi_hw_legacy_wake(sleep_state); - } - -#else - status = acpi_hw_extended_wake(sleep_state); - -#endif /* !ACPI_REDUCED_HARDWARE */ - + status = acpi_hw_sleep_dispatch(sleep_state, ACPI_WAKE_FUNCTION); return_ACPI_STATUS(status); } diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index 48c4d5f..3496158 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -788,6 +788,15 @@ typedef u8 acpi_adr_space_type; #define ACPI_ENABLE_EVENT 1 #define ACPI_DISABLE_EVENT 0 +/* Sleep function dispatch */ + +typedef acpi_status(*ACPI_SLEEP_FUNCTION) (u8 sleep_state); + +struct acpi_sleep_functions { + ACPI_SLEEP_FUNCTION legacy_function; + ACPI_SLEEP_FUNCTION extended_function; +}; + /* * External ACPI object definition */ -- cgit v0.10.2 From dd0228e9220b6c8320ffbf64e58fdac041ec0931 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Mon, 20 Feb 2012 13:50:13 +0800 Subject: ACPICA: Update to version 20120215 Version 20120215. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index e8600dd9..fb8a238 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -47,7 +47,7 @@ /* Current ACPICA subsystem version in YYYYMMDD format */ -#define ACPI_CA_VERSION 0x20120111 +#define ACPI_CA_VERSION 0x20120215 #include "acconfig.h" #include "actypes.h" -- cgit v0.10.2 From 4efeeecd884de36b77c64489dee7eb7ca4d6bed0 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Wed, 21 Mar 2012 09:42:45 +0800 Subject: ACPICA: Clarify METHOD_NAME* defines for full-pathname cases Changed the METHOD_NAME* defines that define a full pathname to the method to METHOD_PATHNAME* in order to make it clear that it is not a simple 4-character ACPI name. Used for the various sleep/wake methods. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown diff --git a/drivers/acpi/acpica/hwesleep.c b/drivers/acpi/acpica/hwesleep.c index 9e44c6c..6cbc4e1 100644 --- a/drivers/acpi/acpica/hwesleep.c +++ b/drivers/acpi/acpica/hwesleep.c @@ -59,7 +59,7 @@ MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".); * * FUNCTION: acpi_hw_execute_sleep_method * - * PARAMETERS: method_name - Pathname of method to execute + * PARAMETERS: method_pathname - Pathname of method to execute * integer_argument - Argument to pass to the method * * RETURN: None @@ -68,7 +68,7 @@ MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".); * and no return value. * ******************************************************************************/ -void acpi_hw_execute_sleep_method(char *method_name, u32 integer_argument) +void acpi_hw_execute_sleep_method(char *method_pathname, u32 integer_argument) { struct acpi_object_list arg_list; union acpi_object arg; @@ -76,10 +76,10 @@ void acpi_hw_execute_sleep_method(char *method_name, u32 integer_argument) ACPI_FUNCTION_TRACE(hw_execute_sleep_method); - if (!ACPI_STRCMP(METHOD_NAME__GTS, method_name) && !gts) + if (!ACPI_STRCMP(METHOD_PATHNAME__GTS, method_pathname) && !gts) return_VOID; - if (!ACPI_STRCMP(METHOD_NAME__BFS, method_name) && !bfs) + if (!ACPI_STRCMP(METHOD_PATHNAME__BFS, method_pathname) && !bfs) return_VOID; /* One argument, integer_argument; No return value expected */ @@ -89,10 +89,10 @@ void acpi_hw_execute_sleep_method(char *method_name, u32 integer_argument) arg.type = ACPI_TYPE_INTEGER; arg.integer.value = (u64)integer_argument; - status = acpi_evaluate_object(NULL, method_name, &arg_list, NULL); + status = acpi_evaluate_object(NULL, method_pathname, &arg_list, NULL); if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { ACPI_EXCEPTION((AE_INFO, status, "While executing method %s", - method_name)); + method_pathname)); } return_VOID; @@ -138,7 +138,7 @@ acpi_status acpi_hw_extended_sleep(u8 sleep_state) /* Execute the _GTS method (Going To Sleep) */ - acpi_hw_execute_sleep_method(METHOD_NAME__GTS, sleep_state); + acpi_hw_execute_sleep_method(METHOD_PATHNAME__GTS, sleep_state); /* Flush caches, as per ACPI specification */ @@ -208,7 +208,7 @@ acpi_status acpi_hw_extended_wake_prep(u8 sleep_state) &acpi_gbl_FADT.sleep_control); } - acpi_hw_execute_sleep_method(METHOD_NAME__BFS, sleep_state); + acpi_hw_execute_sleep_method(METHOD_PATHNAME__BFS, sleep_state); return_ACPI_STATUS(AE_OK); } @@ -235,8 +235,8 @@ acpi_status acpi_hw_extended_wake(u8 sleep_state) /* Execute the wake methods */ - acpi_hw_execute_sleep_method(METHOD_NAME__SST, ACPI_SST_WAKING); - acpi_hw_execute_sleep_method(METHOD_NAME__WAK, sleep_state); + acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WAKING); + acpi_hw_execute_sleep_method(METHOD_PATHNAME__WAK, sleep_state); /* * Some BIOS code assumes that WAK_STS will be cleared on resume @@ -246,6 +246,6 @@ acpi_status acpi_hw_extended_wake(u8 sleep_state) (void)acpi_write(ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status); acpi_gbl_system_awake_and_running = TRUE; - acpi_hw_execute_sleep_method(METHOD_NAME__SST, ACPI_SST_WORKING); + acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WORKING); return_ACPI_STATUS(AE_OK); } diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c index b96d41b..aba3634 100644 --- a/drivers/acpi/acpica/hwsleep.c +++ b/drivers/acpi/acpica/hwsleep.c @@ -123,7 +123,7 @@ acpi_status acpi_hw_legacy_sleep(u8 sleep_state) /* Execute the _GTS method (Going To Sleep) */ - acpi_hw_execute_sleep_method(METHOD_NAME__GTS, sleep_state); + acpi_hw_execute_sleep_method(METHOD_PATHNAME__GTS, sleep_state); /* Get current value of PM1A control */ @@ -279,7 +279,7 @@ acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state) } } - acpi_hw_execute_sleep_method(METHOD_NAME__BFS, sleep_state); + acpi_hw_execute_sleep_method(METHOD_PATHNAME__BFS, sleep_state); return_ACPI_STATUS(status); } @@ -305,7 +305,7 @@ acpi_status acpi_hw_legacy_wake(u8 sleep_state) /* Ensure enter_sleep_state_prep -> enter_sleep_state ordering */ acpi_gbl_sleep_type_a = ACPI_SLEEP_TYPE_INVALID; - acpi_hw_execute_sleep_method(METHOD_NAME__SST, ACPI_SST_WAKING); + acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WAKING); /* * GPEs must be enabled before _WAK is called as GPEs @@ -329,7 +329,7 @@ acpi_status acpi_hw_legacy_wake(u8 sleep_state) * Now we can execute _WAK, etc. Some machines require that the GPEs * are enabled before the wake methods are executed. */ - acpi_hw_execute_sleep_method(METHOD_NAME__WAK, sleep_state); + acpi_hw_execute_sleep_method(METHOD_PATHNAME__WAK, sleep_state); /* * Some BIOS code assumes that WAK_STS will be cleared on resume @@ -361,7 +361,7 @@ acpi_status acpi_hw_legacy_wake(u8 sleep_state) return_ACPI_STATUS(status); } - acpi_hw_execute_sleep_method(METHOD_NAME__SST, ACPI_SST_WORKING); + acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WORKING); return_ACPI_STATUS(status); } diff --git a/drivers/acpi/acpica/hwxfsleep.c b/drivers/acpi/acpica/hwxfsleep.c index b711f97..cf0168e 100644 --- a/drivers/acpi/acpica/hwxfsleep.c +++ b/drivers/acpi/acpica/hwxfsleep.c @@ -306,7 +306,8 @@ acpi_status acpi_enter_sleep_state_prep(u8 sleep_state) arg.type = ACPI_TYPE_INTEGER; arg.integer.value = sleep_state; - status = acpi_evaluate_object(NULL, METHOD_NAME__PTS, &arg_list, NULL); + status = + acpi_evaluate_object(NULL, METHOD_PATHNAME__PTS, &arg_list, NULL); if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { return_ACPI_STATUS(status); } @@ -337,7 +338,7 @@ acpi_status acpi_enter_sleep_state_prep(u8 sleep_state) * Set the system indicators to show the desired sleep state. * _SST is an optional method (return no error if not found) */ - acpi_hw_execute_sleep_method(METHOD_NAME__SST, sst_value); + acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, sst_value); return_ACPI_STATUS(AE_OK); } diff --git a/drivers/acpi/acpica/nsdumpdv.c b/drivers/acpi/acpica/nsdumpdv.c index 30ea5bc..3b5acb0 100644 --- a/drivers/acpi/acpica/nsdumpdv.c +++ b/drivers/acpi/acpica/nsdumpdv.c @@ -121,7 +121,7 @@ void acpi_ns_dump_root_devices(void) return; } - status = acpi_get_handle(NULL, ACPI_NS_SYSTEM_BUS, &sys_bus_handle); + status = acpi_get_handle(NULL, METHOD_NAME__SB_, &sys_bus_handle); if (ACPI_FAILURE(status)) { return; } diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index ca191ff..4fda549 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -788,13 +788,13 @@ static void __init acpi_gts_bfs_check(void) { acpi_handle dummy; - if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__GTS, &dummy))) + if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_PATHNAME__GTS, &dummy))) { printk(KERN_NOTICE PREFIX "BIOS offers _GTS\n"); printk(KERN_NOTICE PREFIX "If \"acpi.gts=1\" improves suspend, " "please notify linux-acpi@vger.kernel.org\n"); } - if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__BFS, &dummy))) + if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_PATHNAME__BFS, &dummy))) { printk(KERN_NOTICE PREFIX "BIOS offers _BFS\n"); printk(KERN_NOTICE PREFIX "If \"acpi.bfs=1\" improves resume, " diff --git a/include/acpi/acnames.h b/include/acpi/acnames.h index 5b5af0d..38f5088 100644 --- a/include/acpi/acnames.h +++ b/include/acpi/acnames.h @@ -46,6 +46,7 @@ /* Method names - these methods can appear anywhere in the namespace */ +#define METHOD_NAME__SB_ "_SB_" #define METHOD_NAME__HID "_HID" #define METHOD_NAME__CID "_CID" #define METHOD_NAME__UID "_UID" @@ -64,11 +65,11 @@ /* Method names - these methods must appear at the namespace root */ -#define METHOD_NAME__BFS "\\_BFS" -#define METHOD_NAME__GTS "\\_GTS" -#define METHOD_NAME__PTS "\\_PTS" -#define METHOD_NAME__SST "\\_SI._SST" -#define METHOD_NAME__WAK "\\_WAK" +#define METHOD_PATHNAME__BFS "\\_BFS" +#define METHOD_PATHNAME__GTS "\\_GTS" +#define METHOD_PATHNAME__PTS "\\_PTS" +#define METHOD_PATHNAME__SST "\\_SI._SST" +#define METHOD_PATHNAME__WAK "\\_WAK" /* Definitions of the predefined namespace names */ @@ -79,6 +80,5 @@ #define ACPI_PREFIX_LOWER (u32) 0x69706361 /* "acpi" */ #define ACPI_NS_ROOT_PATH "\\" -#define ACPI_NS_SYSTEM_BUS "_SB_" #endif /* __ACNAMES_H__ */ -- cgit v0.10.2 From a1acd22f7c6032e8394df7d8adee1a7cdad28b74 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Wed, 21 Mar 2012 09:44:00 +0800 Subject: ACPICA: Change exception code for invalid pathname in acpi_evaluate_object Change the returned exception code from AE_BAD_PARAMETER to the more appropriate AE_BAD_PATHNAME, when the input pathname to evaluate object is invalid. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown diff --git a/drivers/acpi/acpica/nsutils.c b/drivers/acpi/acpica/nsutils.c index a535b7a..7511375 100644 --- a/drivers/acpi/acpica/nsutils.c +++ b/drivers/acpi/acpica/nsutils.c @@ -341,7 +341,7 @@ acpi_status acpi_ns_build_internal_name(struct acpi_namestring_info *info) if (!acpi_ns_valid_path_separator(*external_name) && (*external_name != 0)) { - return_ACPI_STATUS(AE_BAD_PARAMETER); + return_ACPI_STATUS(AE_BAD_PATHNAME); } /* Move on the next segment */ -- cgit v0.10.2 From 4acb6884b5568f19bd47173cba8bc1f2289d6baa Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Wed, 21 Mar 2012 09:46:47 +0800 Subject: ACPICA: Debugger: Add missing object info to namespace dump Many namespace node types must have an attached object. For these node types, print a message about a missing object during a namespace dump. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown diff --git a/drivers/acpi/acpica/nsdump.c b/drivers/acpi/acpica/nsdump.c index b7f2b3b..3f7f3f6 100644 --- a/drivers/acpi/acpica/nsdump.c +++ b/drivers/acpi/acpica/nsdump.c @@ -242,7 +242,20 @@ acpi_ns_dump_one_object(acpi_handle obj_handle, if (!obj_desc) { - /* No attached object, we are done */ + /* No attached object. Some types should always have an object */ + + switch (type) { + case ACPI_TYPE_INTEGER: + case ACPI_TYPE_PACKAGE: + case ACPI_TYPE_BUFFER: + case ACPI_TYPE_STRING: + case ACPI_TYPE_METHOD: + acpi_os_printf(""); + break; + + default: + break; + } acpi_os_printf("\n"); return (AE_OK); -- cgit v0.10.2 From 2815ab92ba3ab27556212cc306288dc95692824b Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 6 Feb 2012 08:17:11 -0800 Subject: ACPI: Do cpufreq clamping for throttling per package v2 On Intel CPUs the processor typically uses the highest frequency set by any logical CPU. When the system overheats Linux first forces the frequency to the lowest available one to lower the temperature. However this was done only per logical CPU, which means all logical CPUs in a package would need to go through this before the frequency is actually lowered. Worse this delay actually prevents real throttling, because the real throttle code only proceeds when the lowest frequency is already reached. So when a throttle event happens force the lowest frequency for all CPUs in the package where it happened. The per CPU state is now kept per package, not per logical CPU. An alternative would be to do it per cpufreq unit, but since we want to bring down the temperature of the complete chip it's better to do it for all. In principle it may even make sense to do it for all CPUs, but I kept it on the package for now. With this change the frequency is actually lowered, which in terms also allows real throttling to proceed. I also removed an unnecessary per cpu variable initialization. v2: Fix package mapping Cc: Signed-off-by: Andi Kleen Signed-off-by: Len Brown diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c index 3b599ab..641b545 100644 --- a/drivers/acpi/processor_thermal.c +++ b/drivers/acpi/processor_thermal.c @@ -57,6 +57,27 @@ ACPI_MODULE_NAME("processor_thermal"); static DEFINE_PER_CPU(unsigned int, cpufreq_thermal_reduction_pctg); static unsigned int acpi_thermal_cpufreq_is_init = 0; +#define reduction_pctg(cpu) \ + per_cpu(cpufreq_thermal_reduction_pctg, phys_package_first_cpu(cpu)) + +/* + * Emulate "per package data" using per cpu data (which should really be + * provided elsewhere) + * + * Note we can lose a CPU on cpu hotunplug, in this case we forget the state + * temporarily. Fortunately that's not a big issue here (I hope) + */ +static int phys_package_first_cpu(int cpu) +{ + int i; + int id = topology_physical_package_id(cpu); + + for_each_online_cpu(i) + if (topology_physical_package_id(i) == id) + return i; + return 0; +} + static int cpu_has_cpufreq(unsigned int cpu) { struct cpufreq_policy policy; @@ -76,7 +97,7 @@ static int acpi_thermal_cpufreq_notifier(struct notifier_block *nb, max_freq = ( policy->cpuinfo.max_freq * - (100 - per_cpu(cpufreq_thermal_reduction_pctg, policy->cpu) * 20) + (100 - reduction_pctg(policy->cpu) * 20) ) / 100; cpufreq_verify_within_limits(policy, 0, max_freq); @@ -102,16 +123,28 @@ static int cpufreq_get_cur_state(unsigned int cpu) if (!cpu_has_cpufreq(cpu)) return 0; - return per_cpu(cpufreq_thermal_reduction_pctg, cpu); + return reduction_pctg(cpu); } static int cpufreq_set_cur_state(unsigned int cpu, int state) { + int i; + if (!cpu_has_cpufreq(cpu)) return 0; - per_cpu(cpufreq_thermal_reduction_pctg, cpu) = state; - cpufreq_update_policy(cpu); + reduction_pctg(cpu) = state; + + /* + * Update all the CPUs in the same package because they all + * contribute to the temperature and often share the same + * frequency. + */ + for_each_online_cpu(i) { + if (topology_physical_package_id(i) == + topology_physical_package_id(cpu)) + cpufreq_update_policy(i); + } return 0; } @@ -119,10 +152,6 @@ void acpi_thermal_cpufreq_init(void) { int i; - for (i = 0; i < nr_cpu_ids; i++) - if (cpu_present(i)) - per_cpu(cpufreq_thermal_reduction_pctg, i) = 0; - i = cpufreq_register_notifier(&acpi_thermal_cpufreq_notifier_block, CPUFREQ_POLICY_NOTIFIER); if (!i) -- cgit v0.10.2 From 8a73b17e4c0e09cb5b80deee5451e29b830df4cc Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Wed, 21 Mar 2012 10:01:49 +0800 Subject: ACPICA: Sleep/Wake interfaces: optionally execute _GTS and _BFS Enhanced the sleep/wake interfaces to optionally execute the _GTS method (Going To Sleep), and the _BFS method (Back From Sleep). Windows apparently does not execute these methods, and therefore these methods are often untested. It has been seen on some systems where the execution of these methods causes errors and also prevents the machine from entering S5. It is therefore suggested that host operating systems do not execute these methods by default. In the future, perhaps these methods can be optionally executed based on the age of the system and/or what is the newest version of Windows that the BIOS asks for via _OSI. Signed-off-by: Lin Ming Signed-off-by: Bob Moore Signed-off-by: Len Brown diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h index 5de4ec7..5ccb99a 100644 --- a/drivers/acpi/acpica/achware.h +++ b/drivers/acpi/acpica/achware.h @@ -83,22 +83,22 @@ acpi_status acpi_hw_clear_acpi_status(void); /* * hwsleep - sleep/wake support (Legacy sleep registers) */ -acpi_status acpi_hw_legacy_sleep(u8 sleep_state); +acpi_status acpi_hw_legacy_sleep(u8 sleep_state, u8 flags); -acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state); +acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state, u8 flags); -acpi_status acpi_hw_legacy_wake(u8 sleep_state); +acpi_status acpi_hw_legacy_wake(u8 sleep_state, u8 flags); /* * hwesleep - sleep/wake support (Extended FADT-V5 sleep registers) */ void acpi_hw_execute_sleep_method(char *method_name, u32 integer_argument); -acpi_status acpi_hw_extended_sleep(u8 sleep_state); +acpi_status acpi_hw_extended_sleep(u8 sleep_state, u8 flags); -acpi_status acpi_hw_extended_wake_prep(u8 sleep_state); +acpi_status acpi_hw_extended_wake_prep(u8 sleep_state, u8 flags); -acpi_status acpi_hw_extended_wake(u8 sleep_state); +acpi_status acpi_hw_extended_wake(u8 sleep_state, u8 flags); /* * hwvalid - Port I/O with validation diff --git a/drivers/acpi/acpica/hwesleep.c b/drivers/acpi/acpica/hwesleep.c index 6cbc4e1..1c409e8 100644 --- a/drivers/acpi/acpica/hwesleep.c +++ b/drivers/acpi/acpica/hwesleep.c @@ -103,6 +103,7 @@ void acpi_hw_execute_sleep_method(char *method_pathname, u32 integer_argument) * FUNCTION: acpi_hw_extended_sleep * * PARAMETERS: sleep_state - Which sleep state to enter + * Flags - ACPI_EXECUTE_GTS to run optional method * * RETURN: Status * @@ -112,7 +113,7 @@ void acpi_hw_execute_sleep_method(char *method_pathname, u32 integer_argument) * ******************************************************************************/ -acpi_status acpi_hw_extended_sleep(u8 sleep_state) +acpi_status acpi_hw_extended_sleep(u8 sleep_state, u8 flags) { acpi_status status; u8 sleep_type_value; @@ -136,9 +137,11 @@ acpi_status acpi_hw_extended_sleep(u8 sleep_state) acpi_gbl_system_awake_and_running = FALSE; - /* Execute the _GTS method (Going To Sleep) */ + /* Optionally execute _GTS (Going To Sleep) */ - acpi_hw_execute_sleep_method(METHOD_PATHNAME__GTS, sleep_state); + if (flags & ACPI_EXECUTE_GTS) { + acpi_hw_execute_sleep_method(METHOD_PATHNAME__GTS, sleep_state); + } /* Flush caches, as per ACPI specification */ @@ -181,6 +184,7 @@ acpi_status acpi_hw_extended_sleep(u8 sleep_state) * FUNCTION: acpi_hw_extended_wake_prep * * PARAMETERS: sleep_state - Which sleep state we just exited + * Flags - ACPI_EXECUTE_BFS to run optional method * * RETURN: Status * @@ -189,7 +193,7 @@ acpi_status acpi_hw_extended_sleep(u8 sleep_state) * ******************************************************************************/ -acpi_status acpi_hw_extended_wake_prep(u8 sleep_state) +acpi_status acpi_hw_extended_wake_prep(u8 sleep_state, u8 flags) { acpi_status status; u8 sleep_type_value; @@ -208,7 +212,11 @@ acpi_status acpi_hw_extended_wake_prep(u8 sleep_state) &acpi_gbl_FADT.sleep_control); } - acpi_hw_execute_sleep_method(METHOD_PATHNAME__BFS, sleep_state); + /* Optionally execute _BFS (Back From Sleep) */ + + if (flags & ACPI_EXECUTE_BFS) { + acpi_hw_execute_sleep_method(METHOD_PATHNAME__BFS, sleep_state); + } return_ACPI_STATUS(AE_OK); } @@ -217,6 +225,7 @@ acpi_status acpi_hw_extended_wake_prep(u8 sleep_state) * FUNCTION: acpi_hw_extended_wake * * PARAMETERS: sleep_state - Which sleep state we just exited + * Flags - Reserved, set to zero * * RETURN: Status * @@ -225,7 +234,7 @@ acpi_status acpi_hw_extended_wake_prep(u8 sleep_state) * ******************************************************************************/ -acpi_status acpi_hw_extended_wake(u8 sleep_state) +acpi_status acpi_hw_extended_wake(u8 sleep_state, u8 flags) { ACPI_FUNCTION_TRACE(hw_extended_wake); diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c index aba3634..8ab325c 100644 --- a/drivers/acpi/acpica/hwsleep.c +++ b/drivers/acpi/acpica/hwsleep.c @@ -56,6 +56,7 @@ ACPI_MODULE_NAME("hwsleep") * FUNCTION: acpi_hw_legacy_sleep * * PARAMETERS: sleep_state - Which sleep state to enter + * Flags - ACPI_EXECUTE_GTS to run optional method * * RETURN: Status * @@ -63,7 +64,7 @@ ACPI_MODULE_NAME("hwsleep") * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED * ******************************************************************************/ -acpi_status acpi_hw_legacy_sleep(u8 sleep_state) +acpi_status acpi_hw_legacy_sleep(u8 sleep_state, u8 flags) { struct acpi_bit_register_info *sleep_type_reg_info; struct acpi_bit_register_info *sleep_enable_reg_info; @@ -121,9 +122,11 @@ acpi_status acpi_hw_legacy_sleep(u8 sleep_state) return_ACPI_STATUS(status); } - /* Execute the _GTS method (Going To Sleep) */ + /* Optionally execute _GTS (Going To Sleep) */ - acpi_hw_execute_sleep_method(METHOD_PATHNAME__GTS, sleep_state); + if (flags & ACPI_EXECUTE_GTS) { + acpi_hw_execute_sleep_method(METHOD_PATHNAME__GTS, sleep_state); + } /* Get current value of PM1A control */ @@ -219,6 +222,7 @@ acpi_status acpi_hw_legacy_sleep(u8 sleep_state) * FUNCTION: acpi_hw_legacy_wake_prep * * PARAMETERS: sleep_state - Which sleep state we just exited + * Flags - ACPI_EXECUTE_BFS to run optional method * * RETURN: Status * @@ -228,7 +232,7 @@ acpi_status acpi_hw_legacy_sleep(u8 sleep_state) * ******************************************************************************/ -acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state) +acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state, u8 flags) { acpi_status status; struct acpi_bit_register_info *sleep_type_reg_info; @@ -279,7 +283,11 @@ acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state) } } - acpi_hw_execute_sleep_method(METHOD_PATHNAME__BFS, sleep_state); + /* Optionally execute _BFS (Back From Sleep) */ + + if (flags & ACPI_EXECUTE_BFS) { + acpi_hw_execute_sleep_method(METHOD_PATHNAME__BFS, sleep_state); + } return_ACPI_STATUS(status); } @@ -288,6 +296,7 @@ acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state) * FUNCTION: acpi_hw_legacy_wake * * PARAMETERS: sleep_state - Which sleep state we just exited + * Flags - Reserved, set to zero * * RETURN: Status * @@ -296,7 +305,7 @@ acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state) * ******************************************************************************/ -acpi_status acpi_hw_legacy_wake(u8 sleep_state) +acpi_status acpi_hw_legacy_wake(u8 sleep_state, u8 flags) { acpi_status status; diff --git a/drivers/acpi/acpica/hwxfsleep.c b/drivers/acpi/acpica/hwxfsleep.c index cf0168e..762d059 100644 --- a/drivers/acpi/acpica/hwxfsleep.c +++ b/drivers/acpi/acpica/hwxfsleep.c @@ -49,15 +49,16 @@ ACPI_MODULE_NAME("hwxfsleep") /* Local prototypes */ -static acpi_status acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id); +static acpi_status +acpi_hw_sleep_dispatch(u8 sleep_state, u8 flags, u32 function_id); /* * Dispatch table used to efficiently branch to the various sleep * functions. */ -#define ACPI_SLEEP_FUNCTION 0 -#define ACPI_WAKE_PREP_FUNCTION 1 -#define ACPI_WAKE_FUNCTION 2 +#define ACPI_SLEEP_FUNCTION_ID 0 +#define ACPI_WAKE_PREP_FUNCTION_ID 1 +#define ACPI_WAKE_FUNCTION_ID 2 /* Legacy functions are optional, based upon ACPI_REDUCED_HARDWARE */ @@ -233,7 +234,8 @@ ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios) * function. * ******************************************************************************/ -static acpi_status acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id) +static acpi_status +acpi_hw_sleep_dispatch(u8 sleep_state, u8 flags, u32 function_id) { acpi_status status; struct acpi_sleep_functions *sleep_functions = @@ -246,11 +248,11 @@ static acpi_status acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id) * use the extended sleep registers */ if (acpi_gbl_reduced_hardware || acpi_gbl_FADT.sleep_control.address) { - status = sleep_functions->extended_function(sleep_state); + status = sleep_functions->extended_function(sleep_state, flags); } else { /* Legacy sleep */ - status = sleep_functions->legacy_function(sleep_state); + status = sleep_functions->legacy_function(sleep_state, flags); } return (status); @@ -260,7 +262,7 @@ static acpi_status acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id) * For the case where reduced-hardware-only code is being generated, * we know that only the extended sleep registers are available */ - status = sleep_functions->extended_function(sleep_state); + status = sleep_functions->extended_function(sleep_state, flags); return (status); #endif /* !ACPI_REDUCED_HARDWARE */ @@ -290,8 +292,6 @@ acpi_status acpi_enter_sleep_state_prep(u8 sleep_state) ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_prep); - /* _PSW methods could be run here to enable wake-on keyboard, LAN, etc. */ - status = acpi_get_sleep_type_data(sleep_state, &acpi_gbl_sleep_type_a, &acpi_gbl_sleep_type_b); @@ -349,6 +349,7 @@ ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep) * FUNCTION: acpi_enter_sleep_state * * PARAMETERS: sleep_state - Which sleep state to enter + * Flags - ACPI_EXECUTE_GTS to run optional method * * RETURN: Status * @@ -356,7 +357,7 @@ ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep) * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED * ******************************************************************************/ -acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) +acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state, u8 flags) { acpi_status status; @@ -369,7 +370,8 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) return_ACPI_STATUS(AE_AML_OPERAND_VALUE); } - status = acpi_hw_sleep_dispatch(sleep_state, ACPI_SLEEP_FUNCTION); + status = + acpi_hw_sleep_dispatch(sleep_state, flags, ACPI_SLEEP_FUNCTION_ID); return_ACPI_STATUS(status); } @@ -380,6 +382,7 @@ ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state) * FUNCTION: acpi_leave_sleep_state_prep * * PARAMETERS: sleep_state - Which sleep state we are exiting + * Flags - ACPI_EXECUTE_BFS to run optional method * * RETURN: Status * @@ -388,13 +391,15 @@ ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state) * Called with interrupts DISABLED. * ******************************************************************************/ -acpi_status acpi_leave_sleep_state_prep(u8 sleep_state) +acpi_status acpi_leave_sleep_state_prep(u8 sleep_state, u8 flags) { acpi_status status; ACPI_FUNCTION_TRACE(acpi_leave_sleep_state_prep); - status = acpi_hw_sleep_dispatch(sleep_state, ACPI_WAKE_PREP_FUNCTION); + status = + acpi_hw_sleep_dispatch(sleep_state, flags, + ACPI_WAKE_PREP_FUNCTION_ID); return_ACPI_STATUS(status); } @@ -419,7 +424,7 @@ acpi_status acpi_leave_sleep_state(u8 sleep_state) ACPI_FUNCTION_TRACE(acpi_leave_sleep_state); - status = acpi_hw_sleep_dispatch(sleep_state, ACPI_WAKE_FUNCTION); + status = acpi_hw_sleep_dispatch(sleep_state, 0, ACPI_WAKE_FUNCTION_ID); return_ACPI_STATUS(status); } diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 4fda549..8f1fb45 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -250,7 +250,8 @@ static int acpi_suspend_enter(suspend_state_t pm_state) switch (acpi_state) { case ACPI_STATE_S1: barrier(); - status = acpi_enter_sleep_state(acpi_state); + status = acpi_enter_sleep_state(acpi_state, + ACPI_NO_OPTIONAL_METHODS); break; case ACPI_STATE_S3: @@ -265,7 +266,7 @@ static int acpi_suspend_enter(suspend_state_t pm_state) acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1); /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(acpi_state); + acpi_leave_sleep_state_prep(acpi_state, ACPI_NO_OPTIONAL_METHODS); /* ACPI 3.0 specs (P62) says that it's the responsibility * of the OSPM to clear the status bit [ implying that the @@ -534,9 +535,9 @@ static int acpi_hibernation_enter(void) ACPI_FLUSH_CPU_CACHE(); /* This shouldn't return. If it returns, we have a problem */ - status = acpi_enter_sleep_state(ACPI_STATE_S4); + status = acpi_enter_sleep_state(ACPI_STATE_S4, ACPI_NO_OPTIONAL_METHODS); /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(ACPI_STATE_S4); + acpi_leave_sleep_state_prep(ACPI_STATE_S4, ACPI_NO_OPTIONAL_METHODS); return ACPI_SUCCESS(status) ? 0 : -EFAULT; } @@ -549,7 +550,7 @@ static void acpi_hibernation_leave(void) */ acpi_enable(); /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(ACPI_STATE_S4); + acpi_leave_sleep_state_prep(ACPI_STATE_S4, ACPI_NO_OPTIONAL_METHODS); /* Check the hardware signature */ if (facs && s4_hardware_signature != facs->hardware_signature) { printk(KERN_EMERG "ACPI: Hardware changed while hibernated, " @@ -773,7 +774,7 @@ static void acpi_power_off(void) /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */ printk(KERN_DEBUG "%s called\n", __func__); local_irq_disable(); - acpi_enter_sleep_state(ACPI_STATE_S5); + acpi_enter_sleep_state(ACPI_STATE_S5, ACPI_NO_OPTIONAL_METHODS); } /* diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index fb8a238..488c986 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -486,11 +486,11 @@ acpi_get_sleep_type_data(u8 sleep_state, u8 * slp_typ_a, u8 * slp_typ_b); acpi_status acpi_enter_sleep_state_prep(u8 sleep_state); -acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state); +acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state, u8 flags); ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void)) -acpi_status acpi_leave_sleep_state_prep(u8 sleep_state); +acpi_status acpi_leave_sleep_state_prep(u8 sleep_state, u8 flags); acpi_status acpi_leave_sleep_state(u8 sleep_state); diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index 3496158..eba6604 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -518,6 +518,13 @@ typedef u64 acpi_integer; #define ACPI_SLEEP_TYPE_INVALID 0xFF /* + * Sleep/Wake flags + */ +#define ACPI_NO_OPTIONAL_METHODS 0x00 /* Do not execute any optional methods */ +#define ACPI_EXECUTE_GTS 0x01 /* For enter sleep interface */ +#define ACPI_EXECUTE_BFS 0x02 /* For leave sleep prep interface */ + +/* * Standard notify values */ #define ACPI_NOTIFY_BUS_CHECK (u8) 0x00 @@ -790,7 +797,7 @@ typedef u8 acpi_adr_space_type; /* Sleep function dispatch */ -typedef acpi_status(*ACPI_SLEEP_FUNCTION) (u8 sleep_state); +typedef acpi_status(*ACPI_SLEEP_FUNCTION) (u8 sleep_state, u8 flags); struct acpi_sleep_functions { ACPI_SLEEP_FUNCTION legacy_function; -- cgit v0.10.2 From a2ef5c4fd44ce3922435139393b89f2cce47f576 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Wed, 21 Mar 2012 10:58:46 +0800 Subject: ACPI: Move module parameter gts and bfs to sleep.c Move linux specific module parameter gts and bfs out of ACPICA core code to sleep.c. Signed-off-by: Lin Ming Signed-off-by: Len Brown diff --git a/drivers/acpi/acpica/hwesleep.c b/drivers/acpi/acpica/hwesleep.c index 1c409e8..29e8592 100644 --- a/drivers/acpi/acpica/hwesleep.c +++ b/drivers/acpi/acpica/hwesleep.c @@ -44,17 +44,10 @@ #include #include "accommon.h" -#include #define _COMPONENT ACPI_HARDWARE ACPI_MODULE_NAME("hwesleep") -static unsigned int gts, bfs; -module_param(gts, uint, 0644); -module_param(bfs, uint, 0644); -MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend."); -MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".); - /******************************************************************************* * * FUNCTION: acpi_hw_execute_sleep_method @@ -76,12 +69,6 @@ void acpi_hw_execute_sleep_method(char *method_pathname, u32 integer_argument) ACPI_FUNCTION_TRACE(hw_execute_sleep_method); - if (!ACPI_STRCMP(METHOD_PATHNAME__GTS, method_pathname) && !gts) - return_VOID; - - if (!ACPI_STRCMP(METHOD_PATHNAME__BFS, method_pathname) && !bfs) - return_VOID; - /* One argument, integer_argument; No return value expected */ arg_list.count = 1; diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 8f1fb45..acf81fe 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -17,6 +17,7 @@ #include #include #include +#include #include @@ -26,6 +27,24 @@ #include "internal.h" #include "sleep.h" +static unsigned int gts, bfs; +module_param(gts, uint, 0644); +module_param(bfs, uint, 0644); +MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend."); +MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".); + +static u8 wake_sleep_flags(void) +{ + u8 flags = ACPI_NO_OPTIONAL_METHODS; + + if (gts) + flags |= ACPI_EXECUTE_GTS; + if (bfs) + flags |= ACPI_EXECUTE_BFS; + + return flags; +} + static u8 sleep_states[ACPI_S_STATE_COUNT]; static void acpi_sleep_tts_switch(u32 acpi_state) @@ -243,6 +262,7 @@ static int acpi_suspend_enter(suspend_state_t pm_state) { acpi_status status = AE_OK; u32 acpi_state = acpi_target_sleep_state; + u8 flags = wake_sleep_flags(); int error; ACPI_FLUSH_CPU_CACHE(); @@ -250,8 +270,7 @@ static int acpi_suspend_enter(suspend_state_t pm_state) switch (acpi_state) { case ACPI_STATE_S1: barrier(); - status = acpi_enter_sleep_state(acpi_state, - ACPI_NO_OPTIONAL_METHODS); + status = acpi_enter_sleep_state(acpi_state, flags); break; case ACPI_STATE_S3: @@ -266,7 +285,7 @@ static int acpi_suspend_enter(suspend_state_t pm_state) acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1); /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(acpi_state, ACPI_NO_OPTIONAL_METHODS); + acpi_leave_sleep_state_prep(acpi_state, flags); /* ACPI 3.0 specs (P62) says that it's the responsibility * of the OSPM to clear the status bit [ implying that the @@ -530,27 +549,30 @@ static int acpi_hibernation_begin(void) static int acpi_hibernation_enter(void) { + u8 flags = wake_sleep_flags(); acpi_status status = AE_OK; ACPI_FLUSH_CPU_CACHE(); /* This shouldn't return. If it returns, we have a problem */ - status = acpi_enter_sleep_state(ACPI_STATE_S4, ACPI_NO_OPTIONAL_METHODS); + status = acpi_enter_sleep_state(ACPI_STATE_S4, flags); /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(ACPI_STATE_S4, ACPI_NO_OPTIONAL_METHODS); + acpi_leave_sleep_state_prep(ACPI_STATE_S4, flags); return ACPI_SUCCESS(status) ? 0 : -EFAULT; } static void acpi_hibernation_leave(void) { + u8 flags = wake_sleep_flags(); + /* * If ACPI is not enabled by the BIOS and the boot kernel, we need to * enable it here. */ acpi_enable(); /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(ACPI_STATE_S4, ACPI_NO_OPTIONAL_METHODS); + acpi_leave_sleep_state_prep(ACPI_STATE_S4, flags); /* Check the hardware signature */ if (facs && s4_hardware_signature != facs->hardware_signature) { printk(KERN_EMERG "ACPI: Hardware changed while hibernated, " @@ -771,10 +793,12 @@ static void acpi_power_off_prepare(void) static void acpi_power_off(void) { + u8 flags = wake_sleep_flags(); + /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */ printk(KERN_DEBUG "%s called\n", __func__); local_irq_disable(); - acpi_enter_sleep_state(ACPI_STATE_S5, ACPI_NO_OPTIONAL_METHODS); + acpi_enter_sleep_state(ACPI_STATE_S5, flags); } /* -- cgit v0.10.2 From e23da0370f80834e971142e50253f5b79be83631 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Mon, 6 Feb 2012 18:37:16 -0500 Subject: tools turbostat: add summary option turbostat -s cuts down on the amount of output, per user request. also treak some output whitespace and the man page. Signed-off-by: Len Brown diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8 index 555c69a..adf175f 100644 --- a/tools/power/x86/turbostat/turbostat.8 +++ b/tools/power/x86/turbostat/turbostat.8 @@ -4,11 +4,13 @@ turbostat \- Report processor frequency and idle statistics .SH SYNOPSIS .ft B .B turbostat +.RB [ "\-s" ] .RB [ "\-v" ] .RB [ "\-M MSR#" ] .RB command .br .B turbostat +.RB [ "\-s" ] .RB [ "\-v" ] .RB [ "\-M MSR#" ] .RB [ "\-i interval_sec" ] @@ -25,6 +27,8 @@ supports an "invariant" TSC, plus the APERF and MPERF MSRs. on processors that additionally support C-state residency counters. .SS Options +The \fB-s\fP option prints only a 1-line summary for each sample interval. +.PP The \fB-v\fP option increases verbosity. .PP The \fB-M MSR#\fP option dumps the specified MSR, @@ -39,13 +43,14 @@ displays the statistics gathered since it was forked. .SH FIELD DESCRIPTIONS .nf \fBpk\fP processor package number. -\fBcr\fP processor core number. +\fBcor\fP processor core number. \fBCPU\fP Linux CPU (logical processor) number. +Note that multiple CPUs per core indicate support for Intel(R) Hyper-Threading Technology. \fB%c0\fP percent of the interval that the CPU retired instructions. \fBGHz\fP average clock rate while the CPU was in c0 state. \fBTSC\fP average GHz that the TSC ran during the entire interval. -\fB%c1, %c3, %c6\fP show the percentage residency in hardware core idle states. -\fB%pc3, %pc6\fP percentage residency in hardware package idle states. +\fB%c1, %c3, %c6, %c7\fP show the percentage residency in hardware core idle states. +\fB%pc2, %pc3, %pc6, %pc7\fP percentage residency in hardware package idle states. .fi .PP .SH EXAMPLE @@ -53,25 +58,37 @@ Without any parameters, turbostat prints out counters ever 5 seconds. (override interval with "-i sec" option, or specify a command for turbostat to fork). -The first row of statistics reflect the average for the entire system. +The first row of statistics is a summary for the entire system. +Note that the summary is a weighted average. Subsequent rows show per-CPU statistics. .nf [root@x980]# ./turbostat -cr CPU %c0 GHz TSC %c1 %c3 %c6 %pc3 %pc6 - 0.04 1.62 3.38 0.11 0.00 99.85 0.00 95.07 - 0 0 0.04 1.62 3.38 0.06 0.00 99.90 0.00 95.07 - 0 6 0.02 1.62 3.38 0.08 0.00 99.90 0.00 95.07 - 1 2 0.10 1.62 3.38 0.29 0.00 99.61 0.00 95.07 - 1 8 0.11 1.62 3.38 0.28 0.00 99.61 0.00 95.07 - 2 4 0.01 1.62 3.38 0.01 0.00 99.98 0.00 95.07 - 2 10 0.01 1.61 3.38 0.02 0.00 99.98 0.00 95.07 - 8 1 0.07 1.62 3.38 0.15 0.00 99.78 0.00 95.07 - 8 7 0.03 1.62 3.38 0.19 0.00 99.78 0.00 95.07 - 9 3 0.01 1.62 3.38 0.02 0.00 99.98 0.00 95.07 - 9 9 0.01 1.62 3.38 0.02 0.00 99.98 0.00 95.07 - 10 5 0.01 1.62 3.38 0.13 0.00 99.86 0.00 95.07 - 10 11 0.08 1.62 3.38 0.05 0.00 99.86 0.00 95.07 +cor CPU %c0 GHz TSC %c1 %c3 %c6 %pc3 %pc6 + 0.60 1.63 3.38 2.91 0.00 96.49 0.00 76.64 + 0 0 0.59 1.62 3.38 4.51 0.00 94.90 0.00 76.64 + 0 6 1.13 1.64 3.38 3.97 0.00 94.90 0.00 76.64 + 1 2 0.08 1.62 3.38 0.07 0.00 99.85 0.00 76.64 + 1 8 0.03 1.62 3.38 0.12 0.00 99.85 0.00 76.64 + 2 4 0.01 1.62 3.38 0.06 0.00 99.93 0.00 76.64 + 2 10 0.04 1.62 3.38 0.02 0.00 99.93 0.00 76.64 + 8 1 2.85 1.62 3.38 11.71 0.00 85.44 0.00 76.64 + 8 7 1.98 1.62 3.38 12.58 0.00 85.44 0.00 76.64 + 9 3 0.36 1.62 3.38 0.71 0.00 98.93 0.00 76.64 + 9 9 0.09 1.62 3.38 0.98 0.00 98.93 0.00 76.64 + 10 5 0.03 1.62 3.38 0.09 0.00 99.87 0.00 76.64 + 10 11 0.07 1.62 3.38 0.06 0.00 99.87 0.00 76.64 +.fi +.SH SUMMARY EXAMPLE +The "-s" option prints the column headers just once, +and then the one line system summary for each sample interval. + +.nf +[root@x980]# ./turbostat -s + %c0 GHz TSC %c1 %c3 %c6 %pc3 %pc6 + 0.61 1.89 3.38 5.95 0.00 93.44 0.00 66.33 + 0.52 1.62 3.38 6.83 0.00 92.65 0.00 61.11 + 0.62 1.92 3.38 5.47 0.00 93.91 0.00 67.31 .fi .SH VERBOSE EXAMPLE The "-v" option adds verbosity to the output: @@ -101,33 +118,33 @@ until ^C while the other CPUs are mostly idle: .nf [root@x980 lenb]# ./turbostat cat /dev/zero > /dev/null - -^Ccr CPU %c0 GHz TSC %c1 %c3 %c6 %pc3 %pc6 - 8.49 3.63 3.38 16.23 0.66 74.63 0.00 0.00 - 0 0 1.22 3.62 3.38 32.18 0.00 66.60 0.00 0.00 - 0 6 0.40 3.61 3.38 33.00 0.00 66.60 0.00 0.00 - 1 2 0.11 3.14 3.38 0.19 3.95 95.75 0.00 0.00 - 1 8 0.05 2.88 3.38 0.25 3.95 95.75 0.00 0.00 - 2 4 0.00 3.13 3.38 0.02 0.00 99.98 0.00 0.00 - 2 10 0.00 3.09 3.38 0.02 0.00 99.98 0.00 0.00 - 8 1 0.04 3.50 3.38 14.43 0.00 85.54 0.00 0.00 - 8 7 0.03 2.98 3.38 14.43 0.00 85.54 0.00 0.00 - 9 3 0.00 3.16 3.38 100.00 0.00 0.00 0.00 0.00 - 9 9 99.93 3.63 3.38 0.06 0.00 0.00 0.00 0.00 - 10 5 0.01 2.82 3.38 0.08 0.00 99.91 0.00 0.00 - 10 11 0.02 3.36 3.38 0.06 0.00 99.91 0.00 0.00 -6.950866 sec +^C +cor CPU %c0 GHz TSC %c1 %c3 %c6 %pc3 %pc6 + 8.63 3.64 3.38 14.46 0.49 76.42 0.00 0.00 + 0 0 0.34 3.36 3.38 99.66 0.00 0.00 0.00 0.00 + 0 6 99.96 3.64 3.38 0.04 0.00 0.00 0.00 0.00 + 1 2 0.14 3.50 3.38 1.75 2.04 96.07 0.00 0.00 + 1 8 0.38 3.57 3.38 1.51 2.04 96.07 0.00 0.00 + 2 4 0.01 2.65 3.38 0.06 0.00 99.93 0.00 0.00 + 2 10 0.03 2.12 3.38 0.04 0.00 99.93 0.00 0.00 + 8 1 0.91 3.59 3.38 35.27 0.92 62.90 0.00 0.00 + 8 7 1.61 3.63 3.38 34.57 0.92 62.90 0.00 0.00 + 9 3 0.04 3.38 3.38 0.20 0.00 99.76 0.00 0.00 + 9 9 0.04 3.29 3.38 0.20 0.00 99.76 0.00 0.00 + 10 5 0.03 3.08 3.38 0.12 0.00 99.85 0.00 0.00 + 10 11 0.05 3.07 3.38 0.10 0.00 99.85 0.00 0.00 +4.907015 sec .fi -Above the cycle soaker drives cpu9 up 3.6 Ghz turbo limit +Above the cycle soaker drives cpu6 up 3.6 Ghz turbo limit while the other processors are generally in various states of idle. -Note that cpu3 is an HT sibling sharing core9 -with cpu9, and thus it is unable to get to an idle state -deeper than c1 while cpu9 is busy. +Note that cpu0 is an HT sibling sharing core0 +with cpu6, and thus it is unable to get to an idle state +deeper than c1 while cpu6 is busy. -Note that turbostat reports average GHz of 3.61, while -the arithmetic average of the GHz column above is 3.24. +Note that turbostat reports average GHz of 3.64, while +the arithmetic average of the GHz column above is lower. This is a weighted average, where the weight is %c0. ie. it is the total number of un-halted cycles elapsed per time divided by the number of CPUs. .SH NOTES @@ -167,6 +184,6 @@ http://www.intel.com/products/processor/manuals/ .SH "SEE ALSO" msr(4), vmstat(8) .PP -.SH AUTHORS +.SH AUTHOR .nf Written by Len Brown diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 310d3dd..6436d54 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -2,7 +2,7 @@ * turbostat -- show CPU frequency and C-state residency * on modern Intel turbo-capable processors. * - * Copyright (c) 2010, Intel Corporation. + * Copyright (c) 2012 Intel Corporation. * Len Brown * * This program is free software; you can redistribute it and/or modify it @@ -49,6 +49,7 @@ char *proc_stat = "/proc/stat"; unsigned int interval_sec = 5; /* set with -i interval_sec */ unsigned int verbose; /* set with -v */ +unsigned int summary_only; /* set with -s */ unsigned int skip_c0; unsigned int skip_c1; unsigned int do_nhm_cstates; @@ -129,14 +130,18 @@ void print_header(void) { if (show_pkg) fprintf(stderr, "pk"); + if (show_pkg) + fprintf(stderr, " "); if (show_core) - fprintf(stderr, " cr"); + fprintf(stderr, "cor"); if (show_cpu) fprintf(stderr, " CPU"); + if (show_pkg || show_core || show_cpu) + fprintf(stderr, " "); if (do_nhm_cstates) - fprintf(stderr, " %%c0 "); + fprintf(stderr, " %%c0"); if (has_aperf) - fprintf(stderr, " GHz"); + fprintf(stderr, " GHz"); fprintf(stderr, " TSC"); if (do_nhm_cstates) fprintf(stderr, " %%c1"); @@ -147,13 +152,13 @@ void print_header(void) if (do_snb_cstates) fprintf(stderr, " %%c7"); if (do_snb_cstates) - fprintf(stderr, " %%pc2"); + fprintf(stderr, " %%pc2"); if (do_nhm_cstates) - fprintf(stderr, " %%pc3"); + fprintf(stderr, " %%pc3"); if (do_nhm_cstates) - fprintf(stderr, " %%pc6"); + fprintf(stderr, " %%pc6"); if (do_snb_cstates) - fprintf(stderr, " %%pc7"); + fprintf(stderr, " %%pc7"); if (extra_msr_offset) fprintf(stderr, " MSR 0x%x ", extra_msr_offset); @@ -187,6 +192,15 @@ void dump_list(struct counters *cnt) dump_cnt(cnt); } +/* + * column formatting convention & formats + * package: "pk" 2 columns %2d + * core: "cor" 3 columns %3d + * CPU: "CPU" 3 columns %3d + * GHz: "GHz" 3 columns %3.2 + * TSC: "TSC" 3 columns %3.2 + * percentage " %pc3" %6.2 + */ void print_cnt(struct counters *p) { double interval_float; @@ -196,39 +210,45 @@ void print_cnt(struct counters *p) /* topology columns, print blanks on 1st (average) line */ if (p == cnt_average) { if (show_pkg) + fprintf(stderr, " "); + if (show_pkg && show_core) fprintf(stderr, " "); if (show_core) - fprintf(stderr, " "); + fprintf(stderr, " "); if (show_cpu) - fprintf(stderr, " "); + fprintf(stderr, " " " "); } else { if (show_pkg) - fprintf(stderr, "%d", p->pkg); + fprintf(stderr, "%2d", p->pkg); + if (show_pkg && show_core) + fprintf(stderr, " "); if (show_core) - fprintf(stderr, "%4d", p->core); + fprintf(stderr, "%3d", p->core); if (show_cpu) - fprintf(stderr, "%4d", p->cpu); + fprintf(stderr, " %3d", p->cpu); } /* %c0 */ if (do_nhm_cstates) { + if (show_pkg || show_core || show_cpu) + fprintf(stderr, " "); if (!skip_c0) - fprintf(stderr, "%7.2f", 100.0 * p->mperf/p->tsc); + fprintf(stderr, "%6.2f", 100.0 * p->mperf/p->tsc); else - fprintf(stderr, " ****"); + fprintf(stderr, " ****"); } /* GHz */ if (has_aperf) { if (!aperf_mperf_unstable) { - fprintf(stderr, "%5.2f", + fprintf(stderr, " %3.2f", 1.0 * p->tsc / units * p->aperf / p->mperf / interval_float); } else { if (p->aperf > p->tsc || p->mperf > p->tsc) { - fprintf(stderr, " ****"); + fprintf(stderr, " ***"); } else { - fprintf(stderr, "%4.1f*", + fprintf(stderr, "%3.1f*", 1.0 * p->tsc / units * p->aperf / p->mperf / interval_float); @@ -241,7 +261,7 @@ void print_cnt(struct counters *p) if (do_nhm_cstates) { if (!skip_c1) - fprintf(stderr, "%7.2f", 100.0 * p->c1/p->tsc); + fprintf(stderr, " %6.2f", 100.0 * p->c1/p->tsc); else fprintf(stderr, " ****"); } @@ -252,13 +272,13 @@ void print_cnt(struct counters *p) if (do_snb_cstates) fprintf(stderr, " %6.2f", 100.0 * p->c7/p->tsc); if (do_snb_cstates) - fprintf(stderr, " %5.2f", 100.0 * p->pc2/p->tsc); + fprintf(stderr, " %6.2f", 100.0 * p->pc2/p->tsc); if (do_nhm_cstates) - fprintf(stderr, " %5.2f", 100.0 * p->pc3/p->tsc); + fprintf(stderr, " %6.2f", 100.0 * p->pc3/p->tsc); if (do_nhm_cstates) - fprintf(stderr, " %5.2f", 100.0 * p->pc6/p->tsc); + fprintf(stderr, " %6.2f", 100.0 * p->pc6/p->tsc); if (do_snb_cstates) - fprintf(stderr, " %5.2f", 100.0 * p->pc7/p->tsc); + fprintf(stderr, " %6.2f", 100.0 * p->pc7/p->tsc); if (extra_msr_offset) fprintf(stderr, " 0x%016llx", p->extra_msr); putc('\n', stderr); @@ -267,12 +287,20 @@ void print_cnt(struct counters *p) void print_counters(struct counters *counters) { struct counters *cnt; + static int printed; - print_header(); + + if (!printed || !summary_only) + print_header(); if (num_cpus > 1) print_cnt(cnt_average); + printed = 1; + + if (summary_only) + return; + for (cnt = counters; cnt != NULL; cnt = cnt->next) print_cnt(cnt); @@ -557,7 +585,8 @@ void insert_counters(struct counters **list, return; } - show_cpu = 1; /* there is more than one CPU */ + if (!summary_only) + show_cpu = 1; /* there is more than one CPU */ /* * insert on front of list. @@ -575,13 +604,15 @@ void insert_counters(struct counters **list, while (prev->next && (prev->next->pkg < new->pkg)) { prev = prev->next; - show_pkg = 1; /* there is more than 1 package */ + if (!summary_only) + show_pkg = 1; /* there is more than 1 package */ } while (prev->next && (prev->next->pkg == new->pkg) && (prev->next->core < new->core)) { prev = prev->next; - show_core = 1; /* there is more than 1 core */ + if (!summary_only) + show_core = 1; /* there is more than 1 core */ } while (prev->next && (prev->next->pkg == new->pkg) @@ -1005,8 +1036,11 @@ void cmdline(int argc, char **argv) progname = argv[0]; - while ((opt = getopt(argc, argv, "+vi:M:")) != -1) { + while ((opt = getopt(argc, argv, "+svi:M:")) != -1) { switch (opt) { + case 's': + summary_only++; + break; case 'v': verbose++; break; -- cgit v0.10.2 From 88c3281f7ba449992f7a33bd2452a8c6fa5503cb Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 29 Mar 2012 21:44:40 -0400 Subject: tools turbostat: reduce measurement overhead due to IPIs turbostat uses /dev/cpu/*/msr interface to read MSRs. For modern systems, it reads 10 MSR/CPU. This can be observed as 10 "Function Call Interrupts" per CPU per sample added to /proc/interrupts. This overhead is measurable on large idle systems, and as Yoquan Song pointed out, it can even trick cpuidle into thinking the system is busy. Here turbostat re-schedules itself in-turn to each CPU so that its MSR reads will always be local. This replaces the 10 "Function Call Interrupts" with a single "Rescheduling interrupt" per sample per CPU. On an idle 32-CPU system, this shifts some residency from the shallow c1 state to the deeper c7 state: # ./turbostat.old -s %c0 GHz TSC %c1 %c3 %c6 %c7 %pc2 %pc3 %pc6 %pc7 0.27 1.29 2.29 0.95 0.02 0.00 98.77 20.23 0.00 77.41 0.00 0.25 1.24 2.29 0.98 0.02 0.00 98.75 20.34 0.03 77.74 0.00 0.27 1.22 2.29 0.54 0.00 0.00 99.18 20.64 0.00 77.70 0.00 0.26 1.22 2.29 1.22 0.00 0.00 98.52 20.22 0.00 77.74 0.00 0.26 1.38 2.29 0.78 0.02 0.00 98.95 20.51 0.05 77.56 0.00 ^C i# ./turbostat.new -s %c0 GHz TSC %c1 %c3 %c6 %c7 %pc2 %pc3 %pc6 %pc7 0.27 1.20 2.29 0.24 0.01 0.00 99.49 20.58 0.00 78.20 0.00 0.27 1.22 2.29 0.25 0.00 0.00 99.48 20.79 0.00 77.85 0.00 0.27 1.20 2.29 0.25 0.02 0.00 99.46 20.71 0.03 77.89 0.00 0.28 1.26 2.29 0.25 0.01 0.00 99.46 20.89 0.02 77.67 0.00 0.27 1.20 2.29 0.24 0.01 0.00 99.48 20.65 0.00 78.04 0.00 cc: Youquan Song Signed-off-by: Len Brown diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 6436d54..fa60872 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -19,6 +19,7 @@ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. */ +#define _GNU_SOURCE #include #include #include @@ -32,6 +33,7 @@ #include #include #include +#include #define MSR_TSC 0x10 #define MSR_NEHALEM_PLATFORM_INFO 0xCE @@ -72,6 +74,8 @@ char *progname; int need_reinitialize; int num_cpus; +cpu_set_t *cpu_mask; +size_t cpu_mask_size; struct counters { unsigned long long tsc; /* per thread */ @@ -100,6 +104,40 @@ struct timeval tv_even; struct timeval tv_odd; struct timeval tv_delta; +/* + * cpu_mask_init(ncpus) + * + * allocate and clear cpu_mask + * set cpu_mask_size + */ +void cpu_mask_init(int ncpus) +{ + cpu_mask = CPU_ALLOC(ncpus); + if (cpu_mask == NULL) { + perror("CPU_ALLOC"); + exit(3); + } + cpu_mask_size = CPU_ALLOC_SIZE(ncpus); + CPU_ZERO_S(cpu_mask_size, cpu_mask); +} + +void cpu_mask_uninit() +{ + CPU_FREE(cpu_mask); + cpu_mask = NULL; + cpu_mask_size = 0; +} + +int cpu_migrate(int cpu) +{ + CPU_ZERO_S(cpu_mask_size, cpu_mask); + CPU_SET_S(cpu, cpu_mask_size, cpu_mask); + if (sched_setaffinity(0, cpu_mask_size, cpu_mask) == -1) + return -1; + else + return 0; +} + unsigned long long get_msr(int cpu, off_t offset) { ssize_t retval; @@ -471,6 +509,11 @@ void compute_average(struct counters *delta, struct counters *avg) void get_counters(struct counters *cnt) { for ( ; cnt; cnt = cnt->next) { + if (cpu_migrate(cnt->cpu)) { + need_reinitialize = 1; + return; + } + cnt->tsc = get_msr(cnt->cpu, MSR_TSC); if (do_nhm_cstates) cnt->c3 = get_msr(cnt->cpu, MSR_CORE_C3_RESIDENCY); @@ -752,6 +795,8 @@ void re_initialize(void) free_all_counters(); num_cpus = for_all_cpus(alloc_new_counters); need_reinitialize = 0; + cpu_mask_uninit(); + cpu_mask_init(num_cpus); printf("num_cpus is now %d\n", num_cpus); } @@ -984,6 +1029,7 @@ void turbostat_init() check_super_user(); num_cpus = for_all_cpus(alloc_new_counters); + cpu_mask_init(num_cpus); if (verbose) print_nehalem_info(); -- cgit v0.10.2 From 15aaa34654831e98dd76f7738b6c7f5d05a66430 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 29 Mar 2012 22:19:58 -0400 Subject: tools turbostat: harden against cpu online/offline Sometimes users have turbostat running in interval mode when they take processors offline/online. Previously, turbostat would survive, but not gracefully. Tighten up the error checking so turbostat notices changesn sooner, and print just 1 line on change: turbostat: re-initialized with num_cpus %d Signed-off-by: Len Brown diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index fa60872..ab2f682 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -71,7 +71,6 @@ unsigned int show_cpu; int aperf_mperf_unstable; int backwards_count; char *progname; -int need_reinitialize; int num_cpus; cpu_set_t *cpu_mask; @@ -138,30 +137,24 @@ int cpu_migrate(int cpu) return 0; } -unsigned long long get_msr(int cpu, off_t offset) +int get_msr(int cpu, off_t offset, unsigned long long *msr) { ssize_t retval; - unsigned long long msr; char pathname[32]; int fd; sprintf(pathname, "/dev/cpu/%d/msr", cpu); fd = open(pathname, O_RDONLY); - if (fd < 0) { - perror(pathname); - need_reinitialize = 1; - return 0; - } - - retval = pread(fd, &msr, sizeof msr, offset); - if (retval != sizeof msr) { - fprintf(stderr, "cpu%d pread(..., 0x%zx) = %jd\n", - cpu, offset, retval); - exit(-2); - } + if (fd < 0) + return -1; + retval = pread(fd, msr, sizeof *msr, offset); close(fd); - return msr; + + if (retval != sizeof *msr) + return -1; + + return 0; } void print_header(void) @@ -506,36 +499,51 @@ void compute_average(struct counters *delta, struct counters *avg) free(sum); } -void get_counters(struct counters *cnt) +int get_counters(struct counters *cnt) { for ( ; cnt; cnt = cnt->next) { - if (cpu_migrate(cnt->cpu)) { - need_reinitialize = 1; - return; + + if (cpu_migrate(cnt->cpu)) + return -1; + + if (get_msr(cnt->cpu, MSR_TSC, &cnt->tsc)) + return -1; + + if (has_aperf) { + if (get_msr(cnt->cpu, MSR_APERF, &cnt->aperf)) + return -1; + if (get_msr(cnt->cpu, MSR_MPERF, &cnt->mperf)) + return -1; + } + + if (do_nhm_cstates) { + if (get_msr(cnt->cpu, MSR_CORE_C3_RESIDENCY, &cnt->c3)) + return -1; + if (get_msr(cnt->cpu, MSR_CORE_C6_RESIDENCY, &cnt->c6)) + return -1; } - cnt->tsc = get_msr(cnt->cpu, MSR_TSC); - if (do_nhm_cstates) - cnt->c3 = get_msr(cnt->cpu, MSR_CORE_C3_RESIDENCY); - if (do_nhm_cstates) - cnt->c6 = get_msr(cnt->cpu, MSR_CORE_C6_RESIDENCY); - if (do_snb_cstates) - cnt->c7 = get_msr(cnt->cpu, MSR_CORE_C7_RESIDENCY); - if (has_aperf) - cnt->aperf = get_msr(cnt->cpu, MSR_APERF); - if (has_aperf) - cnt->mperf = get_msr(cnt->cpu, MSR_MPERF); - if (do_snb_cstates) - cnt->pc2 = get_msr(cnt->cpu, MSR_PKG_C2_RESIDENCY); - if (do_nhm_cstates) - cnt->pc3 = get_msr(cnt->cpu, MSR_PKG_C3_RESIDENCY); - if (do_nhm_cstates) - cnt->pc6 = get_msr(cnt->cpu, MSR_PKG_C6_RESIDENCY); if (do_snb_cstates) - cnt->pc7 = get_msr(cnt->cpu, MSR_PKG_C7_RESIDENCY); + if (get_msr(cnt->cpu, MSR_CORE_C7_RESIDENCY, &cnt->c7)) + return -1; + + if (do_nhm_cstates) { + if (get_msr(cnt->cpu, MSR_PKG_C3_RESIDENCY, &cnt->pc3)) + return -1; + if (get_msr(cnt->cpu, MSR_PKG_C6_RESIDENCY, &cnt->pc6)) + return -1; + } + if (do_snb_cstates) { + if (get_msr(cnt->cpu, MSR_PKG_C2_RESIDENCY, &cnt->pc2)) + return -1; + if (get_msr(cnt->cpu, MSR_PKG_C7_RESIDENCY, &cnt->pc7)) + return -1; + } if (extra_msr_offset) - cnt->extra_msr = get_msr(cnt->cpu, extra_msr_offset); + if (get_msr(cnt->cpu, extra_msr_offset, &cnt->extra_msr)) + return -1; } + return 0; } void print_nehalem_info(void) @@ -546,7 +554,7 @@ void print_nehalem_info(void) if (!do_nehalem_platform_info) return; - msr = get_msr(0, MSR_NEHALEM_PLATFORM_INFO); + get_msr(0, MSR_NEHALEM_PLATFORM_INFO, &msr); ratio = (msr >> 40) & 0xFF; fprintf(stderr, "%d * %.0f = %.0f MHz max efficiency\n", @@ -562,7 +570,7 @@ void print_nehalem_info(void) if (!do_nehalem_turbo_ratio_limit) return; - msr = get_msr(0, MSR_NEHALEM_TURBO_RATIO_LIMIT); + get_msr(0, MSR_NEHALEM_TURBO_RATIO_LIMIT, &msr); ratio = (msr >> 24) & 0xFF; if (ratio) @@ -755,7 +763,7 @@ int get_core_id(int cpu) } /* - * run func(index, cpu) on every cpu in /proc/stat + * run func(pkg, core, cpu) on every cpu in /proc/stat */ int for_all_cpus(void (func)(int, int, int)) @@ -791,20 +799,18 @@ int for_all_cpus(void (func)(int, int, int)) void re_initialize(void) { - printf("turbostat: topology changed, re-initializing.\n"); free_all_counters(); num_cpus = for_all_cpus(alloc_new_counters); - need_reinitialize = 0; cpu_mask_uninit(); cpu_mask_init(num_cpus); - printf("num_cpus is now %d\n", num_cpus); + printf("turbostat: re-initialized with num_cpus %d\n", num_cpus); } void dummy(int pkg, int core, int cpu) { return; } /* * check to see if a cpu came on-line */ -void verify_num_cpus(void) +int verify_num_cpus(void) { int new_num_cpus; @@ -814,8 +820,9 @@ void verify_num_cpus(void) if (verbose) printf("num_cpus was %d, is now %d\n", num_cpus, new_num_cpus); - need_reinitialize = 1; + return -1; } + return 0; } void turbostat_loop() @@ -825,25 +832,25 @@ restart: gettimeofday(&tv_even, (struct timezone *)NULL); while (1) { - verify_num_cpus(); - if (need_reinitialize) { + if (verify_num_cpus()) { re_initialize(); goto restart; } sleep(interval_sec); - get_counters(cnt_odd); + if (get_counters(cnt_odd)) { + re_initialize(); + goto restart; + } gettimeofday(&tv_odd, (struct timezone *)NULL); - compute_delta(cnt_odd, cnt_even, cnt_delta); timersub(&tv_odd, &tv_even, &tv_delta); compute_average(cnt_delta, cnt_average); print_counters(cnt_delta); - if (need_reinitialize) { + sleep(interval_sec); + if (get_counters(cnt_even)) { re_initialize(); goto restart; } - sleep(interval_sec); - get_counters(cnt_even); gettimeofday(&tv_even, (struct timezone *)NULL); compute_delta(cnt_even, cnt_odd, cnt_delta); timersub(&tv_even, &tv_odd, &tv_delta); -- cgit v0.10.2 From d6795fe32da13bde39ea483e42799a22daa730b5 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 6 Feb 2012 08:17:08 -0800 Subject: ACPI: ec: Do request_region outside WARN() WARN() is not supposed to have side effects, so move the request_regions outside. Signed-off-by: Andi Kleen Signed-off-by: Len Brown diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index b19a18d..3268dcf 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -812,10 +812,10 @@ static int acpi_ec_add(struct acpi_device *device) first_ec = ec; device->driver_data = ec; - WARN(!request_region(ec->data_addr, 1, "EC data"), - "Could not request EC data io port 0x%lx", ec->data_addr); - WARN(!request_region(ec->command_addr, 1, "EC cmd"), - "Could not request EC cmd io port 0x%lx", ec->command_addr); + ret = !!request_region(ec->data_addr, 1, "EC data"); + WARN(!ret, "Could not request EC data io port 0x%lx", ec->data_addr); + ret = !!request_region(ec->command_addr, 1, "EC cmd"); + WARN(!ret, "Could not request EC cmd io port 0x%lx", ec->command_addr); pr_info(PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n", ec->gpe, ec->command_addr, ec->data_addr); -- cgit v0.10.2 From 6fe0d0628245fdcd6fad8b837c81e8f7ebc3364d Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 6 Feb 2012 08:17:09 -0800 Subject: ACPI: Make ACPI interrupt threaded Some ACPI interrupt actions may need to wait, and it's easiest to have a thread context for this. So turn the ACPI interrupt into a threaded interrupt. Signed-off-by: Andi Kleen Signed-off-by: Len Brown diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 412a1e0..02367a8 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -595,7 +595,8 @@ acpi_os_install_interrupt_handler(u32 gsi, acpi_osd_handler handler, acpi_irq_handler = handler; acpi_irq_context = context; - if (request_irq(irq, acpi_irq, IRQF_SHARED, "acpi", acpi_irq)) { + if (request_threaded_irq(irq, NULL, acpi_irq, IRQF_SHARED, "acpi", + acpi_irq)) { printk(KERN_ERR PREFIX "SCI (IRQ%d) allocation failed\n", irq); acpi_irq_handler = NULL; return AE_NOT_ACQUIRED; -- cgit v0.10.2 From 6a99b1c94d053b3420eaa4a4bc8b2883dd90a2f9 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Wed, 21 Mar 2012 09:51:39 +0800 Subject: ACPICA: Object repair code: Support to add Package wrappers Repair a common problem with objects that are defined to return a variable-length Package of sub-objects. If there is only one sub-object, some BIOS code mistakenly simply declares the single object instead of a Package with one sub-object. This function attempts to repair this error by wrapping a Package object around the original object, creating the correct and expected Package with one sub-object. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h index 3f24068..e3922ca 100644 --- a/drivers/acpi/acpica/aclocal.h +++ b/drivers/acpi/acpica/aclocal.h @@ -370,6 +370,7 @@ struct acpi_predefined_data { /* Defines for Flags field above */ #define ACPI_OBJECT_REPAIRED 1 +#define ACPI_OBJECT_WRAPPED 2 /* * Bitmapped return value types diff --git a/drivers/acpi/acpica/acnamesp.h b/drivers/acpi/acpica/acnamesp.h index 2c9e0f0..9b19d4b 100644 --- a/drivers/acpi/acpica/acnamesp.h +++ b/drivers/acpi/acpica/acnamesp.h @@ -283,8 +283,9 @@ acpi_ns_repair_object(struct acpi_predefined_data *data, union acpi_operand_object **return_object_ptr); acpi_status -acpi_ns_repair_package_list(struct acpi_predefined_data *data, - union acpi_operand_object **obj_desc_ptr); +acpi_ns_wrap_with_package(struct acpi_predefined_data *data, + union acpi_operand_object *original_object, + union acpi_operand_object **obj_desc_ptr); acpi_status acpi_ns_repair_null_element(struct acpi_predefined_data *data, diff --git a/drivers/acpi/acpica/nspredef.c b/drivers/acpi/acpica/nspredef.c index bbe46a4..23ce096 100644 --- a/drivers/acpi/acpica/nspredef.c +++ b/drivers/acpi/acpica/nspredef.c @@ -638,8 +638,8 @@ acpi_ns_check_package(struct acpi_predefined_data *data, /* Create the new outer package and populate it */ status = - acpi_ns_repair_package_list(data, - return_object_ptr); + acpi_ns_wrap_with_package(data, *elements, + return_object_ptr); if (ACPI_FAILURE(status)) { return (status); } diff --git a/drivers/acpi/acpica/nsrepair.c b/drivers/acpi/acpica/nsrepair.c index 9c35d20..5519a64 100644 --- a/drivers/acpi/acpica/nsrepair.c +++ b/drivers/acpi/acpica/nsrepair.c @@ -71,11 +71,10 @@ ACPI_MODULE_NAME("nsrepair") * Buffer -> String * Buffer -> Package of Integers * Package -> Package of one Package + * An incorrect standalone object is wrapped with required outer package * * Additional possible repairs: - * * Required package elements that are NULL replaced by Integer/String/Buffer - * Incorrect standalone package wrapped with required outer package * ******************************************************************************/ /* Local prototypes */ @@ -91,10 +90,6 @@ static acpi_status acpi_ns_convert_to_buffer(union acpi_operand_object *original_object, union acpi_operand_object **return_object); -static acpi_status -acpi_ns_convert_to_package(union acpi_operand_object *original_object, - union acpi_operand_object **return_object); - /******************************************************************************* * * FUNCTION: acpi_ns_repair_object @@ -151,9 +146,24 @@ acpi_ns_repair_object(struct acpi_predefined_data *data, } } if (expected_btypes & ACPI_RTYPE_PACKAGE) { - status = acpi_ns_convert_to_package(return_object, &new_object); + /* + * A package is expected. We will wrap the existing object with a + * new package object. It is often the case that if a variable-length + * package is required, but there is only a single object needed, the + * BIOS will return that object instead of wrapping it with a Package + * object. Note: after the wrapping, the package will be validated + * for correct contents (expected object type or types). + */ + status = + acpi_ns_wrap_with_package(data, return_object, &new_object); if (ACPI_SUCCESS(status)) { - goto object_repaired; + /* + * The original object just had its reference count + * incremented for being inserted into the new package. + */ + *return_object_ptr = new_object; /* New Package object */ + data->flags |= ACPI_OBJECT_REPAIRED; + return (AE_OK); } } @@ -165,22 +175,27 @@ acpi_ns_repair_object(struct acpi_predefined_data *data, /* Object was successfully repaired */ - /* - * If the original object is a package element, we need to: - * 1. Set the reference count of the new object to match the - * reference count of the old object. - * 2. Decrement the reference count of the original object. - */ if (package_index != ACPI_NOT_PACKAGE_ELEMENT) { - new_object->common.reference_count = - return_object->common.reference_count; + /* + * The original object is a package element. We need to + * decrement the reference count of the original object, + * for removing it from the package. + * + * However, if the original object was just wrapped with a + * package object as part of the repair, we don't need to + * change the reference count. + */ + if (!(data->flags & ACPI_OBJECT_WRAPPED)) { + new_object->common.reference_count = + return_object->common.reference_count; - if (return_object->common.reference_count > 1) { - return_object->common.reference_count--; + if (return_object->common.reference_count > 1) { + return_object->common.reference_count--; + } } ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, - "%s: Converted %s to expected %s at index %u\n", + "%s: Converted %s to expected %s at Package index %u\n", data->pathname, acpi_ut_get_object_type_name(return_object), acpi_ut_get_object_type_name(new_object), @@ -453,65 +468,6 @@ acpi_ns_convert_to_buffer(union acpi_operand_object *original_object, /******************************************************************************* * - * FUNCTION: acpi_ns_convert_to_package - * - * PARAMETERS: original_object - Object to be converted - * return_object - Where the new converted object is returned - * - * RETURN: Status. AE_OK if conversion was successful. - * - * DESCRIPTION: Attempt to convert a Buffer object to a Package. Each byte of - * the buffer is converted to a single integer package element. - * - ******************************************************************************/ - -static acpi_status -acpi_ns_convert_to_package(union acpi_operand_object *original_object, - union acpi_operand_object **return_object) -{ - union acpi_operand_object *new_object; - union acpi_operand_object **elements; - u32 length; - u8 *buffer; - - switch (original_object->common.type) { - case ACPI_TYPE_BUFFER: - - /* Buffer-to-Package conversion */ - - length = original_object->buffer.length; - new_object = acpi_ut_create_package_object(length); - if (!new_object) { - return (AE_NO_MEMORY); - } - - /* Convert each buffer byte to an integer package element */ - - elements = new_object->package.elements; - buffer = original_object->buffer.pointer; - - while (length--) { - *elements = - acpi_ut_create_integer_object((u64) *buffer); - if (!*elements) { - acpi_ut_remove_reference(new_object); - return (AE_NO_MEMORY); - } - elements++; - buffer++; - } - break; - - default: - return (AE_AML_OPERAND_TYPE); - } - - *return_object = new_object; - return (AE_OK); -} - -/******************************************************************************* - * * FUNCTION: acpi_ns_repair_null_element * * PARAMETERS: Data - Pointer to validation data structure @@ -677,55 +633,56 @@ acpi_ns_remove_null_elements(struct acpi_predefined_data *data, /******************************************************************************* * - * FUNCTION: acpi_ns_repair_package_list + * FUNCTION: acpi_ns_wrap_with_package * * PARAMETERS: Data - Pointer to validation data structure - * obj_desc_ptr - Pointer to the object to repair. The new - * package object is returned here, - * overwriting the old object. + * original_object - Pointer to the object to repair. + * obj_desc_ptr - The new package object is returned here * * RETURN: Status, new object in *obj_desc_ptr * - * DESCRIPTION: Repair a common problem with objects that are defined to return - * a variable-length Package of Packages. If the variable-length - * is one, some BIOS code mistakenly simply declares a single - * Package instead of a Package with one sub-Package. This - * function attempts to repair this error by wrapping a Package - * object around the original Package, creating the correct - * Package with one sub-Package. + * DESCRIPTION: Repair a common problem with objects that are defined to + * return a variable-length Package of sub-objects. If there is + * only one sub-object, some BIOS code mistakenly simply declares + * the single object instead of a Package with one sub-object. + * This function attempts to repair this error by wrapping a + * Package object around the original object, creating the + * correct and expected Package with one sub-object. * * Names that can be repaired in this manner include: - * _ALR, _CSD, _HPX, _MLS, _PRT, _PSS, _TRT, TSS + * _ALR, _CSD, _HPX, _MLS, _PLD, _PRT, _PSS, _TRT, _TSS, + * _BCL, _DOD, _FIX, _Sx * ******************************************************************************/ acpi_status -acpi_ns_repair_package_list(struct acpi_predefined_data *data, - union acpi_operand_object **obj_desc_ptr) +acpi_ns_wrap_with_package(struct acpi_predefined_data *data, + union acpi_operand_object *original_object, + union acpi_operand_object **obj_desc_ptr) { union acpi_operand_object *pkg_obj_desc; - ACPI_FUNCTION_NAME(ns_repair_package_list); + ACPI_FUNCTION_NAME(ns_wrap_with_package); /* * Create the new outer package and populate it. The new package will - * have a single element, the lone subpackage. + * have a single element, the lone sub-object. */ pkg_obj_desc = acpi_ut_create_package_object(1); if (!pkg_obj_desc) { return (AE_NO_MEMORY); } - pkg_obj_desc->package.elements[0] = *obj_desc_ptr; + pkg_obj_desc->package.elements[0] = original_object; + + ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, + "%s: Wrapped %s with expected Package object\n", + data->pathname, + acpi_ut_get_object_type_name(original_object))); /* Return the new object in the object pointer */ *obj_desc_ptr = pkg_obj_desc; - data->flags |= ACPI_OBJECT_REPAIRED; - - ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, - "%s: Repaired incorrectly formed Package\n", - data->pathname)); - + data->flags |= ACPI_OBJECT_REPAIRED | ACPI_OBJECT_WRAPPED; return (AE_OK); } -- cgit v0.10.2 From 5aa3c16c6b196857ea24ec1c589e3db3c4c64c96 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Wed, 21 Mar 2012 11:02:24 +0800 Subject: ACPICA: Update to version 20120320 Version 20120320. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index 488c986..9821101 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -47,7 +47,7 @@ /* Current ACPICA subsystem version in YYYYMMDD format */ -#define ACPI_CA_VERSION 0x20120215 +#define ACPI_CA_VERSION 0x20120320 #include "acconfig.h" #include "actypes.h" -- cgit v0.10.2 From 3ebc81b8937d2bc1d0d0064bed29434dfce490aa Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 29 Mar 2012 14:09:38 +0800 Subject: ACPI: Introduce ACPI D3_COLD state support If a device has _PR3, it means the device supports D3_COLD. Add the ability to validate and enter D3_COLD state in ACPI. Signed-off-by: Zhang Rui Signed-off-by: Lin Ming Signed-off-by: Len Brown diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 9ac2a9f..0d681fb 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -500,14 +500,14 @@ int acpi_power_transition(struct acpi_device *device, int state) { int result; - if (!device || (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3)) + if (!device || (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3_COLD)) return -EINVAL; if (device->power.state == state) return 0; if ((device->power.state < ACPI_STATE_D0) - || (device->power.state > ACPI_STATE_D3)) + || (device->power.state > ACPI_STATE_D3_COLD)) return -ENODEV; /* TBD: Resources must be ordered. */ diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 8ab80ba..571396c 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -885,6 +885,13 @@ static int acpi_bus_get_power_flags(struct acpi_device *device) acpi_bus_add_power_resource(ps->resources.handles[j]); } + /* The exist of _PR3 indicates D3Cold support */ + if (i == ACPI_STATE_D3) { + status = acpi_get_handle(device->handle, object_name, &handle); + if (ACPI_SUCCESS(status)) + device->power.states[ACPI_STATE_D3_COLD].flags.valid = 1; + } + /* Evaluate "_PSx" to see if we can do explicit sets */ object_name[2] = 'S'; status = acpi_get_handle(device->handle, object_name, &handle); -- cgit v0.10.2 From 0090def6c37c8ea29508a435e581f2ef26fea10f Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Thu, 29 Mar 2012 14:09:39 +0800 Subject: ACPI: Add interface to register/unregister device to/from power resources Devices may share same list of power resources in _PR0, for example Device(Dev0) { Name (_PR0, Package (0x01) { P0PR, P1PR }) } Device(Dev1) { Name (_PR0, Package (0x01) { P0PR, P1PR } } Assume Dev0 and Dev1 were runtime suspended. Then Dev0 is resumed first and it goes into D0 state. But Dev1 is left in D0_Uninitialised state. This is wrong. In this case, Dev1 must be resumed too. In order to hand this case, each power resource maintains a list of devices which relies on it. When power resource is ON, it will check if the devices on its list can be resumed. The device can only be resumed when all the power resouces of its _PR0 are ON. Signed-off-by: Lin Ming Signed-off-by: Len Brown diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 0d681fb..7049a7d 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -40,9 +40,11 @@ #include #include #include +#include #include #include #include "sleep.h" +#include "internal.h" #define PREFIX "ACPI: " @@ -77,6 +79,20 @@ static struct acpi_driver acpi_power_driver = { }, }; +/* + * A power managed device + * A device may rely on multiple power resources. + * */ +struct acpi_power_managed_device { + struct device *dev; /* The physical device */ + acpi_handle *handle; +}; + +struct acpi_power_resource_device { + struct acpi_power_managed_device *device; + struct acpi_power_resource_device *next; +}; + struct acpi_power_resource { struct acpi_device * device; acpi_bus_id name; @@ -84,6 +100,9 @@ struct acpi_power_resource { u32 order; unsigned int ref_count; struct mutex resource_lock; + + /* List of devices relying on this power resource */ + struct acpi_power_resource_device *devices; }; static struct list_head acpi_power_resource_list; @@ -183,8 +202,26 @@ static int acpi_power_get_list_state(struct acpi_handle_list *list, int *state) return 0; } +/* Resume the device when all power resources in _PR0 are on */ +static void acpi_power_on_device(struct acpi_power_managed_device *device) +{ + struct acpi_device *acpi_dev; + acpi_handle handle = device->handle; + int state; + + if (acpi_bus_get_device(handle, &acpi_dev)) + return; + + if(acpi_power_get_inferred_state(acpi_dev, &state)) + return; + + if (state == ACPI_STATE_D0 && pm_runtime_suspended(device->dev)) + pm_request_resume(device->dev); +} + static int __acpi_power_on(struct acpi_power_resource *resource) { + struct acpi_power_resource_device *device_list = resource->devices; acpi_status status = AE_OK; status = acpi_evaluate_object(resource->device->handle, "_ON", NULL, NULL); @@ -197,6 +234,12 @@ static int __acpi_power_on(struct acpi_power_resource *resource) ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Power resource [%s] turned on\n", resource->name)); + while (device_list) { + acpi_power_on_device(device_list->device); + + device_list = device_list->next; + } + return 0; } @@ -299,6 +342,125 @@ static int acpi_power_on_list(struct acpi_handle_list *list) return result; } +static void __acpi_power_resource_unregister_device(struct device *dev, + acpi_handle res_handle) +{ + struct acpi_power_resource *resource = NULL; + struct acpi_power_resource_device *prev, *curr; + + if (acpi_power_get_context(res_handle, &resource)) + return; + + mutex_lock(&resource->resource_lock); + prev = NULL; + curr = resource->devices; + while (curr) { + if (curr->device->dev == dev) { + if (!prev) + resource->devices = curr->next; + else + prev->next = curr->next; + + kfree(curr); + break; + } + + prev = curr; + curr = curr->next; + } + mutex_unlock(&resource->resource_lock); +} + +/* Unlink dev from all power resources in _PR0 */ +void acpi_power_resource_unregister_device(struct device *dev, acpi_handle handle) +{ + struct acpi_device *acpi_dev; + struct acpi_handle_list *list; + int i; + + if (!dev || !handle) + return; + + if (acpi_bus_get_device(handle, &acpi_dev)) + return; + + list = &acpi_dev->power.states[ACPI_STATE_D0].resources; + + for (i = 0; i < list->count; i++) + __acpi_power_resource_unregister_device(dev, + list->handles[i]); +} + +static int __acpi_power_resource_register_device( + struct acpi_power_managed_device *powered_device, acpi_handle handle) +{ + struct acpi_power_resource *resource = NULL; + struct acpi_power_resource_device *power_resource_device; + int result; + + result = acpi_power_get_context(handle, &resource); + if (result) + return result; + + power_resource_device = kzalloc( + sizeof(*power_resource_device), GFP_KERNEL); + if (!power_resource_device) + return -ENOMEM; + + power_resource_device->device = powered_device; + + mutex_lock(&resource->resource_lock); + power_resource_device->next = resource->devices; + resource->devices = power_resource_device; + mutex_unlock(&resource->resource_lock); + + return 0; +} + +/* Link dev to all power resources in _PR0 */ +int acpi_power_resource_register_device(struct device *dev, acpi_handle handle) +{ + struct acpi_device *acpi_dev; + struct acpi_handle_list *list; + struct acpi_power_managed_device *powered_device; + int i, ret; + + if (!dev || !handle) + return -ENODEV; + + ret = acpi_bus_get_device(handle, &acpi_dev); + if (ret) + goto no_power_resource; + + if (!acpi_dev->power.flags.power_resources) + goto no_power_resource; + + powered_device = kzalloc(sizeof(*powered_device), GFP_KERNEL); + if (!powered_device) + return -ENOMEM; + + powered_device->dev = dev; + powered_device->handle = handle; + + list = &acpi_dev->power.states[ACPI_STATE_D0].resources; + + for (i = 0; i < list->count; i++) { + ret = __acpi_power_resource_register_device(powered_device, + list->handles[i]); + + if (ret) { + acpi_power_resource_unregister_device(dev, handle); + break; + } + } + + return ret; + +no_power_resource: + printk(KERN_WARNING PREFIX "Invalid Power Resource to register!"); + return -ENODEV; +} + /** * acpi_device_sleep_wake - execute _DSW (Device Sleep Wake) or (deprecated in * ACPI 3.0) _PSW (Power State Wake) diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 6cd5b64..e168fff 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -323,6 +323,8 @@ int acpi_bus_set_power(acpi_handle handle, int state); int acpi_bus_update_power(acpi_handle handle, int *state_p); bool acpi_bus_power_manageable(acpi_handle handle); bool acpi_bus_can_wakeup(acpi_handle handle); +int acpi_power_resource_register_device(struct device *dev, acpi_handle handle); +void acpi_power_resource_unregister_device(struct device *dev, acpi_handle handle); #ifdef CONFIG_ACPI_PROC_EVENT int acpi_bus_generate_proc_event(struct acpi_device *device, u8 type, int data); int acpi_bus_generate_proc_event4(const char *class, const char *bid, u8 type, int data); -- cgit v0.10.2 From 3a53396b0381ec9d5180fd8fe7a681c8ce95fd9a Mon Sep 17 00:00:00 2001 From: ShuoX Liu Date: Wed, 28 Mar 2012 15:19:11 -0700 Subject: cpuidle: add a sysfs entry to disable specific C state for debug purpose. Some C states of new CPU might be not good. One reason is BIOS might configure them incorrectly. To help developers root cause it quickly, the patch adds a new sysfs entry, so developers could disable specific C state manually. In addition, C state might have much impact on performance tuning, as it takes much time to enter/exit C states, which might delay interrupt processing. With the new debug option, developers could check if a deep C state could impact performance and how much impact it could cause. Also add this option in Documentation/cpuidle/sysfs.txt. [akpm@linux-foundation.org: check kstrtol return value] Signed-off-by: ShuoX Liu Reviewed-by: Yanmin Zhang Reviewed-and-Tested-by: Deepthi Dharwar Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/Documentation/cpuidle/sysfs.txt b/Documentation/cpuidle/sysfs.txt index 50d7b16..9d28a34 100644 --- a/Documentation/cpuidle/sysfs.txt +++ b/Documentation/cpuidle/sysfs.txt @@ -36,6 +36,7 @@ drwxr-xr-x 2 root root 0 Feb 8 10:42 state3 /sys/devices/system/cpu/cpu0/cpuidle/state0: total 0 -r--r--r-- 1 root root 4096 Feb 8 10:42 desc +-rw-r--r-- 1 root root 4096 Feb 8 10:42 disable -r--r--r-- 1 root root 4096 Feb 8 10:42 latency -r--r--r-- 1 root root 4096 Feb 8 10:42 name -r--r--r-- 1 root root 4096 Feb 8 10:42 power @@ -45,6 +46,7 @@ total 0 /sys/devices/system/cpu/cpu0/cpuidle/state1: total 0 -r--r--r-- 1 root root 4096 Feb 8 10:42 desc +-rw-r--r-- 1 root root 4096 Feb 8 10:42 disable -r--r--r-- 1 root root 4096 Feb 8 10:42 latency -r--r--r-- 1 root root 4096 Feb 8 10:42 name -r--r--r-- 1 root root 4096 Feb 8 10:42 power @@ -54,6 +56,7 @@ total 0 /sys/devices/system/cpu/cpu0/cpuidle/state2: total 0 -r--r--r-- 1 root root 4096 Feb 8 10:42 desc +-rw-r--r-- 1 root root 4096 Feb 8 10:42 disable -r--r--r-- 1 root root 4096 Feb 8 10:42 latency -r--r--r-- 1 root root 4096 Feb 8 10:42 name -r--r--r-- 1 root root 4096 Feb 8 10:42 power @@ -63,6 +66,7 @@ total 0 /sys/devices/system/cpu/cpu0/cpuidle/state3: total 0 -r--r--r-- 1 root root 4096 Feb 8 10:42 desc +-rw-r--r-- 1 root root 4096 Feb 8 10:42 disable -r--r--r-- 1 root root 4096 Feb 8 10:42 latency -r--r--r-- 1 root root 4096 Feb 8 10:42 name -r--r--r-- 1 root root 4096 Feb 8 10:42 power @@ -72,6 +76,7 @@ total 0 * desc : Small description about the idle state (string) +* disable : Option to disable this idle state (bool) * latency : Latency to exit out of this idle state (in microseconds) * name : Name of the idle state (string) * power : Power consumed while in this idle state (in milliwatts) diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index 4869b55..77304b6 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -245,6 +245,7 @@ static void poll_idle_init(struct cpuidle_driver *drv) state->power_usage = -1; state->flags = 0; state->enter = poll_idle; + state->disable = 0; } #else static void poll_idle_init(struct cpuidle_driver *drv) {} diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c index ad09526..5c17ca1 100644 --- a/drivers/cpuidle/governors/menu.c +++ b/drivers/cpuidle/governors/menu.c @@ -280,7 +280,8 @@ static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev) * We want to default to C1 (hlt), not to busy polling * unless the timer is happening really really soon. */ - if (data->expected_us > 5) + if (data->expected_us > 5 && + drv->states[CPUIDLE_DRIVER_STATE_START].disable == 0) data->last_state_idx = CPUIDLE_DRIVER_STATE_START; /* @@ -290,6 +291,8 @@ static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev) for (i = CPUIDLE_DRIVER_STATE_START; i < drv->state_count; i++) { struct cpuidle_state *s = &drv->states[i]; + if (s->disable) + continue; if (s->target_residency > data->predicted_us) continue; if (s->exit_latency > latency_req) diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c index 3fe41fe..88032b4 100644 --- a/drivers/cpuidle/sysfs.c +++ b/drivers/cpuidle/sysfs.c @@ -11,6 +11,7 @@ #include #include #include +#include #include "cpuidle.h" @@ -222,6 +223,9 @@ struct cpuidle_state_attr { #define define_one_state_ro(_name, show) \ static struct cpuidle_state_attr attr_##_name = __ATTR(_name, 0444, show, NULL) +#define define_one_state_rw(_name, show, store) \ +static struct cpuidle_state_attr attr_##_name = __ATTR(_name, 0644, show, store) + #define define_show_state_function(_name) \ static ssize_t show_state_##_name(struct cpuidle_state *state, \ struct cpuidle_state_usage *state_usage, char *buf) \ @@ -229,6 +233,24 @@ static ssize_t show_state_##_name(struct cpuidle_state *state, \ return sprintf(buf, "%u\n", state->_name);\ } +#define define_store_state_function(_name) \ +static ssize_t store_state_##_name(struct cpuidle_state *state, \ + const char *buf, size_t size) \ +{ \ + long value; \ + int err; \ + if (!capable(CAP_SYS_ADMIN)) \ + return -EPERM; \ + err = kstrtol(buf, 0, &value); \ + if (err) \ + return err; \ + if (value) \ + state->disable = 1; \ + else \ + state->disable = 0; \ + return size; \ +} + #define define_show_state_ull_function(_name) \ static ssize_t show_state_##_name(struct cpuidle_state *state, \ struct cpuidle_state_usage *state_usage, char *buf) \ @@ -251,6 +273,8 @@ define_show_state_ull_function(usage) define_show_state_ull_function(time) define_show_state_str_function(name) define_show_state_str_function(desc) +define_show_state_function(disable) +define_store_state_function(disable) define_one_state_ro(name, show_state_name); define_one_state_ro(desc, show_state_desc); @@ -258,6 +282,7 @@ define_one_state_ro(latency, show_state_exit_latency); define_one_state_ro(power, show_state_power_usage); define_one_state_ro(usage, show_state_usage); define_one_state_ro(time, show_state_time); +define_one_state_rw(disable, show_state_disable, store_state_disable); static struct attribute *cpuidle_state_default_attrs[] = { &attr_name.attr, @@ -266,6 +291,7 @@ static struct attribute *cpuidle_state_default_attrs[] = { &attr_power.attr, &attr_usage.attr, &attr_time.attr, + &attr_disable.attr, NULL }; @@ -287,8 +313,22 @@ static ssize_t cpuidle_state_show(struct kobject * kobj, return ret; } +static ssize_t cpuidle_state_store(struct kobject *kobj, + struct attribute *attr, const char *buf, size_t size) +{ + int ret = -EIO; + struct cpuidle_state *state = kobj_to_state(kobj); + struct cpuidle_state_attr *cattr = attr_to_stateattr(attr); + + if (cattr->store) + ret = cattr->store(state, buf, size); + + return ret; +} + static const struct sysfs_ops cpuidle_state_sysfs_ops = { .show = cpuidle_state_show, + .store = cpuidle_state_store, }; static void cpuidle_state_sysfs_release(struct kobject *kobj) diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 927db28..ca4e498 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -46,6 +46,7 @@ struct cpuidle_state { unsigned int exit_latency; /* in US */ unsigned int power_usage; /* in mW */ unsigned int target_residency; /* in US */ + unsigned int disable; int (*enter) (struct cpuidle_device *dev, struct cpuidle_driver *drv, -- cgit v0.10.2 From fc850f39ea54c760ce438a601cfea8ab80c4898e Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Mon, 26 Mar 2012 14:51:26 +0200 Subject: cpuidle: use the driver's state_count as default If the state_count is not initialized for the device use the driver's state count as the default. That will prevent to add it manually in the cpuidle driver initialization routine and will save us from duplicate line of code. Signed-off-by: Daniel Lezcano Signed-off-by: Len Brown diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index 77304b6..f7cab5e 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -268,7 +268,7 @@ int cpuidle_enable_device(struct cpuidle_device *dev) if (!drv || !cpuidle_curr_governor) return -EIO; if (!dev->state_count) - return -EINVAL; + dev->state_count = drv->state_count; if (dev->registered == 0) { ret = __cpuidle_register_device(dev); diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c index 284d7af..40cd3f3 100644 --- a/drivers/cpuidle/driver.c +++ b/drivers/cpuidle/driver.c @@ -47,7 +47,7 @@ static void __cpuidle_register_driver(struct cpuidle_driver *drv) */ int cpuidle_register_driver(struct cpuidle_driver *drv) { - if (!drv) + if (!drv || !drv->state_count) return -EINVAL; if (cpuidle_disabled()) -- cgit v0.10.2 From db70b04407a63668e5fee773f76f90367492fd25 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Mon, 26 Mar 2012 14:51:27 +0200 Subject: cpuidle: remove useless array definition in cpuidle_structure All the modules name are ro-data, it is never copied to the array. eg. static struct cpuidle_driver intel_idle_driver = { .name = "intel_idle", .owner = THIS_MODULE, }; It safe to assign the pointer of this ro-data to a const char *. By this way we save 12 bytes. Signed-off-by: Daniel Lezcano Acked-by: Deepthi Dharwar Tested-by: Deepthi Dharwar Signed-off-by: Len Brown diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index ca4e498..f7f1d90 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -120,7 +120,7 @@ static inline int cpuidle_get_last_residency(struct cpuidle_device *dev) ****************************/ struct cpuidle_driver { - char name[CPUIDLE_NAME_LEN]; + const char *name; struct module *owner; unsigned int power_specified:1; -- cgit v0.10.2 From e07510585a88c0f6c6c728e2e006aa913496d4ae Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Mon, 26 Mar 2012 14:51:28 +0200 Subject: cpuidle: remove unused 'governor_data' field As far as I can see, this field is never used in the code. Signed-off-by: Daniel Lezcano Signed-off-by: Len Brown diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index f7f1d90..f3ebbba 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -98,7 +98,6 @@ struct cpuidle_device { struct list_head device_list; struct kobject kobj; struct completion kobj_unregister; - void *governor_data; }; DECLARE_PER_CPU(struct cpuidle_device *, cpuidle_devices); -- cgit v0.10.2 From b24e5098853653554baf6ec975b9e855f3d6e5c0 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Tue, 27 Mar 2012 15:43:25 +0800 Subject: ACPI, PCI: Move acpi_dev_run_wake() to ACPI core acpi_dev_run_wake() is a generic function which can be used by other subsystem too. Rename it to acpi_pm_device_run_wake, to be consistent with acpi_pm_device_sleep_wake. Then move it to ACPI core. Acked-by: Rafael J. Wysocki Signed-off-by: Lin Ming Signed-off-by: Len Brown diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index ca191ff..00fa664 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -17,6 +17,7 @@ #include #include #include +#include #include @@ -730,6 +731,40 @@ int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p) #ifdef CONFIG_PM_SLEEP /** + * acpi_pm_device_run_wake - Enable/disable wake-up for given device. + * @phys_dev: Device to enable/disable the platform to wake-up the system for. + * @enable: Whether enable or disable the wake-up functionality. + * + * Find the ACPI device object corresponding to @pci_dev and try to + * enable/disable the GPE associated with it. + */ +int acpi_pm_device_run_wake(struct device *phys_dev, bool enable) +{ + struct acpi_device *dev; + acpi_handle handle; + + if (!device_run_wake(phys_dev)) + return -EINVAL; + + handle = DEVICE_ACPI_HANDLE(phys_dev); + if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &dev))) { + dev_dbg(phys_dev, "ACPI handle has no context in %s!\n", + __func__); + return -ENODEV; + } + + if (enable) { + acpi_enable_wakeup_device_power(dev, ACPI_STATE_S0); + acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number); + } else { + acpi_disable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number); + acpi_disable_wakeup_device_power(dev); + } + + return 0; +} + +/** * acpi_pm_device_sleep_wake - enable or disable the system wake-up * capability of given device * @dev: device to handle diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 060fd22..0f150f2 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -277,40 +277,6 @@ static int acpi_pci_sleep_wake(struct pci_dev *dev, bool enable) return 0; } -/** - * acpi_dev_run_wake - Enable/disable wake-up for given device. - * @phys_dev: Device to enable/disable the platform to wake-up the system for. - * @enable: Whether enable or disable the wake-up functionality. - * - * Find the ACPI device object corresponding to @pci_dev and try to - * enable/disable the GPE associated with it. - */ -static int acpi_dev_run_wake(struct device *phys_dev, bool enable) -{ - struct acpi_device *dev; - acpi_handle handle; - - if (!device_run_wake(phys_dev)) - return -EINVAL; - - handle = DEVICE_ACPI_HANDLE(phys_dev); - if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &dev))) { - dev_dbg(phys_dev, "ACPI handle has no context in %s!\n", - __func__); - return -ENODEV; - } - - if (enable) { - acpi_enable_wakeup_device_power(dev, ACPI_STATE_S0); - acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number); - } else { - acpi_disable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number); - acpi_disable_wakeup_device_power(dev); - } - - return 0; -} - static void acpi_pci_propagate_run_wake(struct pci_bus *bus, bool enable) { while (bus->parent) { @@ -318,14 +284,14 @@ static void acpi_pci_propagate_run_wake(struct pci_bus *bus, bool enable) if (bridge->pme_interrupt) return; - if (!acpi_dev_run_wake(&bridge->dev, enable)) + if (!acpi_pm_device_run_wake(&bridge->dev, enable)) return; bus = bus->parent; } /* We have reached the root bus. */ if (bus->bridge) - acpi_dev_run_wake(bus->bridge, enable); + acpi_pm_device_run_wake(bus->bridge, enable); } static int acpi_pci_run_wake(struct pci_dev *dev, bool enable) @@ -333,7 +299,7 @@ static int acpi_pci_run_wake(struct pci_dev *dev, bool enable) if (dev->pme_interrupt) return 0; - if (!acpi_dev_run_wake(&dev->dev, enable)) + if (!acpi_pm_device_run_wake(&dev->dev, enable)) return 0; acpi_pci_propagate_run_wake(dev->bus, enable); diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index e168fff..f1c8ca6 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -394,8 +394,13 @@ static inline int acpi_pm_device_sleep_state(struct device *d, int *p) #endif #ifdef CONFIG_PM_SLEEP +int acpi_pm_device_run_wake(struct device *, bool); int acpi_pm_device_sleep_wake(struct device *, bool); #else +static inline int acpi_pm_device_run_wake(struct device *dev, bool enable) +{ + return -ENODEV; +} static inline int acpi_pm_device_sleep_wake(struct device *dev, bool enable) { return -ENODEV; -- cgit v0.10.2 From 9bcb8118965ab4631a65ee0726e6518f75cda6c5 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Wed, 1 Feb 2012 10:26:54 -0500 Subject: ACPI: Evaluate thermal trip points before reading temperature An HP laptop (Pavilion G4-1016tx) has the following code in _TMP: Store (\_SB.PCI0.LPCB.EC0.RTMP, Local0) If (LGreaterEqual (Local0, S4TP)) { Store (One, HTS4) } S4TP is initialised at 0 and not programmed further until either _HOT or _CRT is called. If we evaluate _TMP before the trip points then HTS4 will always be set, causing the firmware to generate a message on boot complaining that the system shut down because of overheating. The simplest solution is just to reverse the checking of trip points and _TMP in thermal init. Signed-off-by: Matthew Garrett Signed-off-by: Len Brown diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 48fbc64..7dbebea 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -941,13 +941,13 @@ static int acpi_thermal_get_info(struct acpi_thermal *tz) if (!tz) return -EINVAL; - /* Get temperature [_TMP] (required) */ - result = acpi_thermal_get_temperature(tz); + /* Get trip points [_CRT, _PSV, etc.] (required) */ + result = acpi_thermal_get_trip_points(tz); if (result) return result; - /* Get trip points [_CRT, _PSV, etc.] (required) */ - result = acpi_thermal_get_trip_points(tz); + /* Get temperature [_TMP] (required) */ + result = acpi_thermal_get_temperature(tz); if (result) return result; -- cgit v0.10.2 From c6436f5a395d346e9f4892d7aeed4c3f99261f0f Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 13 Feb 2012 17:04:43 -0700 Subject: ACPI / PM: print physical addresses consistently with other parts of kernel Print physical address info in a style consistent with the %pR style used elsewhere in the kernel. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown diff --git a/drivers/acpi/nvs.c b/drivers/acpi/nvs.c index 7a2035f..266bc58 100644 --- a/drivers/acpi/nvs.c +++ b/drivers/acpi/nvs.c @@ -95,8 +95,8 @@ static int suspend_nvs_register(unsigned long start, unsigned long size) { struct nvs_page *entry, *next; - pr_info("PM: Registering ACPI NVS region at %lx (%ld bytes)\n", - start, size); + pr_info("PM: Registering ACPI NVS region [mem %#010lx-%#010lx] (%ld bytes)\n", + start, start + size - 1, size); while (size > 0) { unsigned int nr_bytes; -- cgit v0.10.2 From 9f324bda970c599ca35f7be89d9d1bcb96d6053c Mon Sep 17 00:00:00 2001 From: Toshi Kani Date: Mon, 19 Mar 2012 13:08:02 -0600 Subject: ACPI: Add CPU hotplug support for processor device objects acpi_processor_install_hotplug_notify() registers processor objects to receive ACPI CPU hotplug event notifications. This patch additionally registers processor device objects (ACPI0007) to receive the notifications as well. Signed-off-by: Toshi Kani Reviewed-by: Bjorn Helgaas Signed-off-by: Len Brown diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index 8ae05ce..50be277 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -68,6 +68,7 @@ #define ACPI_PROCESSOR_NOTIFY_PERFORMANCE 0x80 #define ACPI_PROCESSOR_NOTIFY_POWER 0x81 #define ACPI_PROCESSOR_NOTIFY_THROTTLING 0x82 +#define ACPI_PROCESSOR_DEVICE_HID "ACPI0007" #define ACPI_PROCESSOR_LIMIT_USER 0 #define ACPI_PROCESSOR_LIMIT_THERMAL 1 @@ -88,7 +89,7 @@ static int acpi_processor_start(struct acpi_processor *pr); static const struct acpi_device_id processor_device_ids[] = { {ACPI_PROCESSOR_OBJECT_HID, 0}, - {"ACPI0007", 0}, + {ACPI_PROCESSOR_DEVICE_HID, 0}, {"", 0}, }; MODULE_DEVICE_TABLE(acpi, processor_device_ids); @@ -741,20 +742,46 @@ static void acpi_processor_hotplug_notify(acpi_handle handle, return; } +static acpi_status is_processor_device(acpi_handle handle) +{ + struct acpi_device_info *info; + char *hid; + acpi_status status; + + status = acpi_get_object_info(handle, &info); + if (ACPI_FAILURE(status)) + return status; + + if (info->type == ACPI_TYPE_PROCESSOR) { + kfree(info); + return AE_OK; /* found a processor object */ + } + + if (!(info->valid & ACPI_VALID_HID)) { + kfree(info); + return AE_ERROR; + } + + hid = info->hardware_id.string; + if ((hid == NULL) || strcmp(hid, ACPI_PROCESSOR_DEVICE_HID)) { + kfree(info); + return AE_ERROR; + } + + kfree(info); + return AE_OK; /* found a processor device object */ +} + static acpi_status processor_walk_namespace_cb(acpi_handle handle, u32 lvl, void *context, void **rv) { acpi_status status; int *action = context; - acpi_object_type type = 0; - status = acpi_get_type(handle, &type); + status = is_processor_device(handle); if (ACPI_FAILURE(status)) - return (AE_OK); - - if (type != ACPI_TYPE_PROCESSOR) - return (AE_OK); + return AE_OK; /* not a processor; continue to walk */ switch (*action) { case INSTALL_NOTIFY_HANDLER: @@ -772,7 +799,8 @@ processor_walk_namespace_cb(acpi_handle handle, break; } - return (AE_OK); + /* found a processor; skip walking underneath */ + return AE_CTRL_DEPTH; } static acpi_status acpi_processor_hotadd_init(struct acpi_processor *pr) @@ -830,7 +858,7 @@ void acpi_processor_install_hotplug_notify(void) { #ifdef CONFIG_ACPI_HOTPLUG_CPU int action = INSTALL_NOTIFY_HANDLER; - acpi_walk_namespace(ACPI_TYPE_PROCESSOR, + acpi_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, processor_walk_namespace_cb, NULL, &action, NULL); @@ -843,7 +871,7 @@ void acpi_processor_uninstall_hotplug_notify(void) { #ifdef CONFIG_ACPI_HOTPLUG_CPU int action = UNINSTALL_NOTIFY_HANDLER; - acpi_walk_namespace(ACPI_TYPE_PROCESSOR, + acpi_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, processor_walk_namespace_cb, NULL, &action, NULL); -- cgit v0.10.2 From 1a022e3f1be11730bd8747b1af96a0274bf6356e Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Tue, 13 Mar 2012 19:55:09 +0100 Subject: idle, x86: Allow off-lined CPU to enter deeper C states Currently when a CPU is off-lined it enters either MWAIT-based idle or, if MWAIT is not desired or supported, HLT-based idle (which places the processor in C1 state). This patch allows processors without MWAIT support to stay in states deeper than C1. Signed-off-by: Boris Ostrovsky Signed-off-by: Len Brown diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 66d250c..93a2a09 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -50,6 +50,7 @@ #include #include #include +#include #include #include @@ -1422,7 +1423,8 @@ void native_play_dead(void) tboot_shutdown(TB_SHUTDOWN_WFS); mwait_play_dead(); /* Only returns on failure */ - hlt_play_dead(); + if (cpuidle_play_dead()) + hlt_play_dead(); } #else /* ... !CONFIG_HOTPLUG_CPU */ diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 0e8e2de..6b1d32a 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -770,6 +770,35 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev, return index; } + +/** + * acpi_idle_play_dead - enters an ACPI state for long-term idle (i.e. off-lining) + * @dev: the target CPU + * @index: the index of suggested state + */ +static int acpi_idle_play_dead(struct cpuidle_device *dev, int index) +{ + struct cpuidle_state_usage *state_usage = &dev->states_usage[index]; + struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage); + + ACPI_FLUSH_CPU_CACHE(); + + while (1) { + + if (cx->entry_method == ACPI_CSTATE_HALT) + halt(); + else if (cx->entry_method == ACPI_CSTATE_SYSTEMIO) { + inb(cx->address); + /* See comment in acpi_idle_do_entry() */ + inl(acpi_gbl_FADT.xpm_timer_block.address); + } else + return -ENODEV; + } + + /* Never reached */ + return 0; +} + /** * acpi_idle_enter_simple - enters an ACPI state without BM handling * @dev: the target CPU @@ -1077,12 +1106,14 @@ static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr) state->flags |= CPUIDLE_FLAG_TIME_VALID; state->enter = acpi_idle_enter_c1; + state->enter_dead = acpi_idle_play_dead; drv->safe_state_index = count; break; case ACPI_STATE_C2: state->flags |= CPUIDLE_FLAG_TIME_VALID; state->enter = acpi_idle_enter_simple; + state->enter_dead = acpi_idle_play_dead; drv->safe_state_index = count; break; diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index f7cab5e..3e146b2 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -72,6 +72,34 @@ typedef int (*cpuidle_enter_t)(struct cpuidle_device *dev, static cpuidle_enter_t cpuidle_enter_ops; /** + * cpuidle_play_dead - cpu off-lining + * + * Only returns in case of an error + */ +int cpuidle_play_dead(void) +{ + struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices); + struct cpuidle_driver *drv = cpuidle_get_driver(); + int i, dead_state = -1; + int power_usage = -1; + + /* Find lowest-power state that supports long-term idle */ + for (i = CPUIDLE_DRIVER_STATE_START; i < drv->state_count; i++) { + struct cpuidle_state *s = &drv->states[i]; + + if (s->power_usage < power_usage && s->enter_dead) { + power_usage = s->power_usage; + dead_state = i; + } + } + + if (dead_state != -1) + return drv->states[dead_state].enter_dead(dev, dead_state); + + return -ENODEV; +} + +/** * cpuidle_idle_call - the main idle loop * * NOTE: no locks or semaphores should be used here diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index f3ebbba..d557bcd 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -51,6 +51,8 @@ struct cpuidle_state { int (*enter) (struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); + + int (*enter_dead) (struct cpuidle_device *dev, int index); }; /* Idle State Flags */ @@ -147,6 +149,8 @@ extern int cpuidle_wrap_enter(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index, int (*enter)(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index)); +extern int cpuidle_play_dead(void); + #else static inline void disable_cpuidle(void) { } static inline int cpuidle_idle_call(void) { return -ENODEV; } @@ -168,6 +172,7 @@ static inline int cpuidle_wrap_enter(struct cpuidle_device *dev, int (*enter)(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index)) { return -ENODEV; } +static inline int cpuidle_play_dead(void) {return -ENODEV; } #endif -- cgit v0.10.2 From 02401c06b7f6bec65f314e3cec7894502c973501 Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Tue, 13 Mar 2012 19:55:10 +0100 Subject: cpuidle: power_usage should be declared signed integer power_usage is always assigned a negative value and should be declared a signed integer Signed-off-by: Boris Ostrovsky Signed-off-by: Len Brown diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c index 5c17ca1..0633575 100644 --- a/drivers/cpuidle/governors/menu.c +++ b/drivers/cpuidle/governors/menu.c @@ -236,7 +236,7 @@ static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev) { struct menu_device *data = &__get_cpu_var(menu_devices); int latency_req = pm_qos_request(PM_QOS_CPU_DMA_LATENCY); - unsigned int power_usage = -1; + int power_usage = -1; int i; int multiplier; struct timespec t; diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index d557bcd..6c26a3d 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -44,7 +44,7 @@ struct cpuidle_state { unsigned int flags; unsigned int exit_latency; /* in US */ - unsigned int power_usage; /* in mW */ + int power_usage; /* in mW */ unsigned int target_residency; /* in US */ unsigned int disable; -- cgit v0.10.2 From 7ed28f2ed43ece424ff2fa4dedac7928bb37a23a Mon Sep 17 00:00:00 2001 From: Jiang Liu Date: Wed, 7 Mar 2012 22:15:06 +0800 Subject: ACPI, APEI, Fix ERST header length check This fixes a trivial copy & paste error in ERST header length check. It's just for future safety because sizeof(struct acpi_table_einj) equals to sizeof(struct acpi_table_erst) with current ACPI5.0 specification. It applies to v3.3-rc6. Signed-off-by: Jiang Liu Acked-by: Huang Ying Signed-off-by: Len Brown diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c index eb9fab5..e4d9d24 100644 --- a/drivers/acpi/apei/erst.c +++ b/drivers/acpi/apei/erst.c @@ -917,7 +917,7 @@ static int erst_check_table(struct acpi_table_erst *erst_tab) { if ((erst_tab->header_length != (sizeof(struct acpi_table_erst) - sizeof(erst_tab->header))) - && (erst_tab->header_length != sizeof(struct acpi_table_einj))) + && (erst_tab->header_length != sizeof(struct acpi_table_erst))) return -EINVAL; if (erst_tab->header.length < sizeof(struct acpi_table_erst)) return -EINVAL; -- cgit v0.10.2 From 185210cc754754c2504afcef9d1c9cd4b8761a9c Mon Sep 17 00:00:00 2001 From: Chen Gong Date: Sat, 3 Mar 2012 11:56:43 +0800 Subject: ACPI, APEI, EINJ, limit the range of einj_param On the platforms with ACPI4.x support, parameter extension is not always doable, which means only parameter extension is enabled, einj_param can take effect. v2->v1: stopping early in einj_get_parameter_address for einj_param Signed-off-by: Chen Gong Acked-by: Tony Luck Signed-off-by: Len Brown diff --git a/drivers/acpi/apei/einj.c b/drivers/acpi/apei/einj.c index 4ca087d..3d3816f 100644 --- a/drivers/acpi/apei/einj.c +++ b/drivers/acpi/apei/einj.c @@ -238,7 +238,7 @@ static void *einj_get_parameter_address(void) return v5param; } } - if (paddrv4) { + if (param_extension && paddrv4) { struct einj_parameter *v4param; v4param = acpi_os_map_memory(paddrv4, sizeof(*v4param)); -- cgit v0.10.2 From ee49089dc7d9fc78db51e18f4fba68e88edc49a4 Mon Sep 17 00:00:00 2001 From: Chen Gong Date: Thu, 15 Mar 2012 16:53:36 +0800 Subject: ACPI, APEI, EINJ, new parameter to control trigger action Some APEI firmware implementation will access injected address specified in param1 to trigger the error when injecting memory error, which means if one SRAR error is injected, the crash always happens because it is executed in kernel context. This new parameter can disable trigger action and control is taken over by the user. In this way, an SRAR error can happen in user context instead of crashing the system. This function is highly depended on BIOS implementation so please ensure you know the BIOS trigger procedure before you enable this switch. v2: notrigger should be created together with param1/param2 Tested-by: Tony Luck Signed-off-by: Chen Gong Signed-off-by: Len Brown diff --git a/drivers/acpi/apei/einj.c b/drivers/acpi/apei/einj.c index 3d3816f..8e17936 100644 --- a/drivers/acpi/apei/einj.c +++ b/drivers/acpi/apei/einj.c @@ -74,6 +74,8 @@ struct vendor_error_type_extension { u8 reserved[3]; }; +static u32 notrigger; + static u32 vendor_flags; static struct debugfs_blob_wrapper vendor_blob; static char vendor_dev[64]; @@ -496,9 +498,11 @@ static int __einj_error_inject(u32 type, u64 param1, u64 param2) if (rc) return rc; trigger_paddr = apei_exec_ctx_get_output(&ctx); - rc = __einj_error_trigger(trigger_paddr, type, param1, param2); - if (rc) - return rc; + if (notrigger == 0) { + rc = __einj_error_trigger(trigger_paddr, type, param1, param2); + if (rc) + return rc; + } rc = apei_exec_run_optional(&ctx, ACPI_EINJ_END_OPERATION); return rc; @@ -700,6 +704,11 @@ static int __init einj_init(void) einj_debug_dir, &error_param2); if (!fentry) goto err_unmap; + + fentry = debugfs_create_x32("notrigger", S_IRUSR | S_IWUSR, + einj_debug_dir, ¬rigger); + if (!fentry) + goto err_unmap; } if (vendor_dev[0]) { -- cgit v0.10.2 From 6ef19ab7fa1535d35006535dba6c407dad2d845c Mon Sep 17 00:00:00 2001 From: Chen Gong Date: Thu, 15 Mar 2012 16:53:37 +0800 Subject: Update documentation for parameter *notrigger* in einj.txt Add description of parameter notrigger in the einj.txt. One can utilize this new parameter to do some SRAR injection test. Pay attention, the operation is highly depended on the BIOS implementation. If no proper BIOS supports it, even if enabling this parameter, expected result will not happen. v2: Update the documentation suggested by Tony Suggested-by: Tony Luck Signed-off-by: Chen Gong Signed-off-by: Len Brown diff --git a/Documentation/acpi/apei/einj.txt b/Documentation/acpi/apei/einj.txt index e7cc363..e20b6da 100644 --- a/Documentation/acpi/apei/einj.txt +++ b/Documentation/acpi/apei/einj.txt @@ -53,6 +53,14 @@ directory apei/einj. The following files are provided. This file is used to set the second error parameter value. Effect of parameter depends on error_type specified. +- notrigger + The EINJ mechanism is a two step process. First inject the error, then + perform some actions to trigger it. Setting "notrigger" to 1 skips the + trigger phase, which *may* allow the user to cause the error in some other + context by a simple access to the cpu, memory location, or device that is + the target of the error injection. Whether this actually works depends + on what operations the BIOS actually includes in the trigger phase. + BIOS versions based in the ACPI 4.0 specification have limited options to control where the errors are injected. Your BIOS may support an extension (enabled with the param_extension=1 module parameter, or -- cgit v0.10.2 From 15afae604651d4e17652d2ffb56f5e36f991cfef Mon Sep 17 00:00:00 2001 From: Gary Hade Date: Wed, 21 Mar 2012 15:28:50 -0700 Subject: ACPI, APEI: Fix incorrect APEI register bit width check and usage The current code incorrectly assumes that (1) the APEI register bit width is always 8, 16, 32, or 64 and (2) the APEI register bit width is always equal to the APEI register access width. ERST serialization instructions entries such as: [030h 0048 1] Action : 00 [Begin Write Operation] [031h 0049 1] Instruction : 03 [Write Register Value] [032h 0050 1] Flags (decoded below) : 01 Preserve Register Bits : 1 [033h 0051 1] Reserved : 00 [034h 0052 12] Register Region : [Generic Address Structure] [034h 0052 1] Space ID : 00 [SystemMemory] [035h 0053 1] Bit Width : 03 [036h 0054 1] Bit Offset : 00 [037h 0055 1] Encoded Access Width : 03 [DWord Access:32] [038h 0056 8] Address : 000000007F2D7038 [040h 0064 8] Value : 0000000000000001 [048h 0072 8] Mask : 0000000000000007 break this assumption by yielding: [Firmware Bug]: APEI: Invalid bit width in GAR [0x7f2d7038/3/0] I have found no ACPI specification requirements corresponding with the above assumptions. There is even a good example in the Serialization Instruction Entries section (ACPI 4.0 section 17.4,1.2, ACPI 4.0a section 2.5.1.2, ACPI 5.0 section 18.5.1.2) that mentions a serialization instruction with a bit range of [6:2] which is 5 bits wide, _not_ 8, 16, 32, or 64 bits wide. Compile and boot tested with 3.3.0-rc7 on a IBM HX5. Signed-off-by: Gary Hade Signed-off-by: Len Brown diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c index e5d53b7..1d3656f 100644 --- a/drivers/acpi/apei/apei-base.c +++ b/drivers/acpi/apei/apei-base.c @@ -558,33 +558,48 @@ void apei_resources_release(struct apei_resources *resources) } EXPORT_SYMBOL_GPL(apei_resources_release); -static int apei_check_gar(struct acpi_generic_address *reg, u64 *paddr) +static int apei_check_gar(struct acpi_generic_address *reg, u64 *paddr, + u32 *access_bit_width) { - u32 width, space_id; + u32 bit_width, bit_offset, access_size_code, space_id; - width = reg->bit_width; + bit_width = reg->bit_width; + bit_offset = reg->bit_offset; + access_size_code = reg->access_width; space_id = reg->space_id; /* Handle possible alignment issues */ memcpy(paddr, ®->address, sizeof(*paddr)); if (!*paddr) { pr_warning(FW_BUG APEI_PFX - "Invalid physical address in GAR [0x%llx/%u/%u]\n", - *paddr, width, space_id); + "Invalid physical address in GAR [0x%llx/%u/%u/%u/%u]\n", + *paddr, bit_width, bit_offset, access_size_code, + space_id); return -EINVAL; } - if ((width != 8) && (width != 16) && (width != 32) && (width != 64)) { + if (access_size_code < 1 || access_size_code > 4) { pr_warning(FW_BUG APEI_PFX - "Invalid bit width in GAR [0x%llx/%u/%u]\n", - *paddr, width, space_id); + "Invalid access size code in GAR [0x%llx/%u/%u/%u/%u]\n", + *paddr, bit_width, bit_offset, access_size_code, + space_id); + return -EINVAL; + } + *access_bit_width = 1UL << (access_size_code + 2); + + if ((bit_width + bit_offset) > *access_bit_width) { + pr_warning(FW_BUG APEI_PFX + "Invalid bit width + offset in GAR [0x%llx/%u/%u/%u/%u]\n", + *paddr, bit_width, bit_offset, access_size_code, + space_id); return -EINVAL; } if (space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY && space_id != ACPI_ADR_SPACE_SYSTEM_IO) { pr_warning(FW_BUG APEI_PFX - "Invalid address space type in GAR [0x%llx/%u/%u]\n", - *paddr, width, space_id); + "Invalid address space type in GAR [0x%llx/%u/%u/%u/%u]\n", + *paddr, bit_width, bit_offset, access_size_code, + space_id); return -EINVAL; } @@ -595,23 +610,25 @@ static int apei_check_gar(struct acpi_generic_address *reg, u64 *paddr) int apei_read(u64 *val, struct acpi_generic_address *reg) { int rc; + u32 access_bit_width; u64 address; acpi_status status; - rc = apei_check_gar(reg, &address); + rc = apei_check_gar(reg, &address, &access_bit_width); if (rc) return rc; *val = 0; switch(reg->space_id) { case ACPI_ADR_SPACE_SYSTEM_MEMORY: - status = acpi_os_read_memory64((acpi_physical_address) - address, val, reg->bit_width); + status = acpi_os_read_memory64((acpi_physical_address) address, + val, access_bit_width); if (ACPI_FAILURE(status)) return -EIO; break; case ACPI_ADR_SPACE_SYSTEM_IO: - status = acpi_os_read_port(address, (u32 *)val, reg->bit_width); + status = acpi_os_read_port(address, (u32 *)val, + access_bit_width); if (ACPI_FAILURE(status)) return -EIO; break; @@ -627,22 +644,23 @@ EXPORT_SYMBOL_GPL(apei_read); int apei_write(u64 val, struct acpi_generic_address *reg) { int rc; + u32 access_bit_width; u64 address; acpi_status status; - rc = apei_check_gar(reg, &address); + rc = apei_check_gar(reg, &address, &access_bit_width); if (rc) return rc; switch (reg->space_id) { case ACPI_ADR_SPACE_SYSTEM_MEMORY: - status = acpi_os_write_memory64((acpi_physical_address) - address, val, reg->bit_width); + status = acpi_os_write_memory64((acpi_physical_address) address, + val, access_bit_width); if (ACPI_FAILURE(status)) return -EIO; break; case ACPI_ADR_SPACE_SYSTEM_IO: - status = acpi_os_write_port(address, val, reg->bit_width); + status = acpi_os_write_port(address, val, access_bit_width); if (ACPI_FAILURE(status)) return -EIO; break; @@ -661,23 +679,24 @@ static int collect_res_callback(struct apei_exec_context *ctx, struct apei_resources *resources = data; struct acpi_generic_address *reg = &entry->register_region; u8 ins = entry->instruction; + u32 access_bit_width; u64 paddr; int rc; if (!(ctx->ins_table[ins].flags & APEI_EXEC_INS_ACCESS_REGISTER)) return 0; - rc = apei_check_gar(reg, &paddr); + rc = apei_check_gar(reg, &paddr, &access_bit_width); if (rc) return rc; switch (reg->space_id) { case ACPI_ADR_SPACE_SYSTEM_MEMORY: return apei_res_add(&resources->iomem, paddr, - reg->bit_width / 8); + access_bit_width / 8); case ACPI_ADR_SPACE_SYSTEM_IO: return apei_res_add(&resources->ioport, paddr, - reg->bit_width / 8); + access_bit_width / 8); default: return -EINVAL; } -- cgit v0.10.2 From c80f5b31f3c55a197f5323b93d1e3553429a427e Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 15 Mar 2012 09:32:05 +0100 Subject: ACPI: processor_driver: add missing kfree The function acpi_processor_add is stored in the ops.add field of a acpi_driver structure. This function is then called in acpi_bus_driver_init. On failure, this function clears the field device->driver_data, but does not free its contents. Thus the free has to be done by the add function. In acpi_processor_add, the corresponding value is pr. This value is currently freed on failure before storing it in device->driver_data, but not after. This free is added in the error handling code at the end of the function. The per_cpu variable processors is also cleared so that it does not refer to a dangling pointer. Signed-off-by: Julia Lawall Reviewed-by: Srivatsa S. Bhat Acked-by: Deepthi Dharwar Signed-off-by: Len Brown diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index 8ae05ce..fce0066 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -535,8 +535,8 @@ static int __cpuinit acpi_processor_add(struct acpi_device *device) return -ENOMEM; if (!zalloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) { - kfree(pr); - return -ENOMEM; + result = -ENOMEM; + goto err_free_pr; } pr->handle = device->handle; @@ -576,7 +576,7 @@ static int __cpuinit acpi_processor_add(struct acpi_device *device) dev = get_cpu_device(pr->id); if (sysfs_create_link(&device->dev.kobj, &dev->kobj, "sysdev")) { result = -EFAULT; - goto err_free_cpumask; + goto err_clear_processor; } /* @@ -594,9 +594,15 @@ static int __cpuinit acpi_processor_add(struct acpi_device *device) err_remove_sysfs: sysfs_remove_link(&device->dev.kobj, "sysdev"); +err_clear_processor: + /* + * processor_device_array is not cleared to allow checks for buggy BIOS + */ + per_cpu(processors, pr->id) = NULL; err_free_cpumask: free_cpumask_var(pr->throttling.shared_cpu_map); - +err_free_pr: + kfree(pr); return result; } -- cgit v0.10.2 From ac909ec308ce8d5177963c780564824d12bc3fa2 Mon Sep 17 00:00:00 2001 From: Petr Vandrovec Date: Thu, 8 Mar 2012 13:33:24 -0800 Subject: ACPI: Fix use-after-free in acpi_map_lsapic When processor is being hot-added to the system, acpi_map_lsapic invokes ACPI _MAT method to find APIC ID and flags, verifies that returned structure is indeed ACPI's local APIC structure, and that flags contain MADT_ENABLED bit. Then saves APIC ID, frees structure - and accesses structure when computing arguments for acpi_register_lapic call. Which sometime leads to acpi_register_lapic call being made with second argument zero, failing to bring processor online with error 'Unable to map lapic to logical cpu number'. As lapic->lapic_flags & ACPI_MADT_ENABLED was already confirmed to be non-zero few lines above, we can just pass unconditional ACPI_MADT_ENABLED to the acpi_register_lapic. Signed-off-by: Petr Vandrovec Signed-off-by: Alok N Kataria Reviewed-by: Toshi Kani Signed-off-by: Len Brown diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index ce664f3..bbcc2c3 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -642,6 +642,7 @@ static int __cpuinit _acpi_map_lsapic(acpi_handle handle, int *pcpu) kfree(buffer.pointer); buffer.length = ACPI_ALLOCATE_BUFFER; buffer.pointer = NULL; + lapic = NULL; if (!alloc_cpumask_var(&tmp_map, GFP_KERNEL)) goto out; @@ -650,7 +651,7 @@ static int __cpuinit _acpi_map_lsapic(acpi_handle handle, int *pcpu) goto free_tmp_map; cpumask_copy(tmp_map, cpu_present_mask); - acpi_register_lapic(physid, lapic->lapic_flags & ACPI_MADT_ENABLED); + acpi_register_lapic(physid, ACPI_MADT_ENABLED); /* * If mp_register_lapic successfully generates a new logical cpu -- cgit v0.10.2 From 89e96ada572fb216e582dbe3f64e1a6939a37f74 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 3 Mar 2012 13:29:20 -0800 Subject: PNPACPI: Fix device ref leaking in acpi_pnp_match During testing pci root bus removal, found some root bus bridge is not freed. If booting with pnpacpi=off, those hostbridge could be freed without problem. It turns out that some devices reference are not released during acpi_pnp_match. that match should not hold one device ref during every calling. Add pu_device calling before returning. Signed-off-by: Yinghai Lu Cc: stable@vger.kernel.org Signed-off-by: Len Brown diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c index b00c176..d21e8f5 100644 --- a/drivers/pnp/pnpacpi/core.c +++ b/drivers/pnp/pnpacpi/core.c @@ -321,9 +321,14 @@ static int __init acpi_pnp_match(struct device *dev, void *_pnp) { struct acpi_device *acpi = to_acpi_device(dev); struct pnp_dev *pnp = _pnp; + struct device *physical_device; + + physical_device = acpi_get_physical_device(acpi->handle); + if (physical_device) + put_device(physical_device); /* true means it matched */ - return !acpi_get_physical_device(acpi->handle) + return !physical_device && compare_pnp_id(pnp->id, acpi_device_hid(acpi)); } -- cgit v0.10.2 From e252675fb722d4a307cc380a06a905f03cf9951c Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Fri, 24 Feb 2012 11:41:53 +0000 Subject: ACPI: consistently use should_use_kmap() ... so that acpi_unmap()'s behavior gets in sync with acpi_map()'s. Signed-off-by: Jan Beulich Signed-off-by: Len Brown diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 412a1e0..5aef087 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -347,7 +347,7 @@ static void acpi_unmap(acpi_physical_address pg_off, void __iomem *vaddr) unsigned long pfn; pfn = pg_off >> PAGE_SHIFT; - if (page_is_ram(pfn)) + if (should_use_kmap(pfn)) kunmap(pfn_to_page(pfn)); else iounmap(vaddr); -- cgit v0.10.2 From 9505626d7bfeb5bd4b85acb483831ac640b2a5e8 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Tue, 28 Feb 2012 13:27:44 -0800 Subject: ACPI: Fix unprotected smp_processor_id() in acpi_processor_cst_has_changed() The acpi_processor_cst_has_changed() function is invoked from a CPU_ONLINE or CPU_DEAD function, which might well execute on CPU 0 even though the CPU being hotplugged is some other CPU. In addition, acpi_processor_cst_has_changed() invokes smp_processor_id() without protection, resulting in splats when onlining CPUs. This commit therefore changes the smp_processor_id() to pr->id, as is used elsewhere in the code, for example, in acpi_processor_add(). Signed-off-by: Paul E. McKenney Signed-off-by: Paul E. McKenney Reviewed-by: Srivatsa S. Bhat Tested-by: Yong Zhang Acked-by: Rafael J. Wysocki Signed-off-by: Len Brown diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 0e8e2de..9e57b06 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -1159,8 +1159,7 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr) * to make the code that updates C-States be called once. */ - if (smp_processor_id() == 0 && - cpuidle_get_driver() == &acpi_idle_driver) { + if (pr->id == 0 && cpuidle_get_driver() == &acpi_idle_driver) { cpuidle_pause_and_lock(); /* Protect against cpu-hotplug */ -- cgit v0.10.2 From 37239978778806ecba54da60676abb46870acebb Mon Sep 17 00:00:00 2001 From: Alex He Date: Tue, 21 Feb 2012 16:58:10 +0800 Subject: ACPI: Clean redundant codes in scan.c Clean the redundant codes of apci_bus_get_power_flags(). Signed-off-by: Alex He Signed-off-by: Len Brown diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 8ab80ba..5d24a17 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -880,7 +880,6 @@ static int acpi_bus_get_power_flags(struct acpi_device *device) int j; device->power.flags.power_resources = 1; - ps->flags.valid = 1; for (j = 0; j < ps->resources.count; j++) acpi_bus_add_power_resource(ps->resources.handles[j]); } @@ -888,10 +887,8 @@ static int acpi_bus_get_power_flags(struct acpi_device *device) /* Evaluate "_PSx" to see if we can do explicit sets */ object_name[2] = 'S'; status = acpi_get_handle(device->handle, object_name, &handle); - if (ACPI_SUCCESS(status)) { + if (ACPI_SUCCESS(status)) ps->flags.explicit_set = 1; - ps->flags.valid = 1; - } /* State is valid if we have some power control */ if (ps->resources.count || ps->flags.explicit_set) -- cgit v0.10.2 From 37d2a3622d249d83413c92a1cd9e94b5237d0fcc Mon Sep 17 00:00:00 2001 From: Jiang Liu Date: Wed, 15 Feb 2012 00:01:44 +0800 Subject: CPER failed to handle generic error records with multiple sections The function apei_estatus_print() and apei_estatus_check() forget to move ahead the gdata pointer when dealing with multiple generic error data sections. Signed-off-by: Jiang Liu Signed-off-by: Len Brown diff --git a/drivers/acpi/apei/cper.c b/drivers/acpi/apei/cper.c index 5d41894..e6defd8 100644 --- a/drivers/acpi/apei/cper.c +++ b/drivers/acpi/apei/cper.c @@ -362,6 +362,7 @@ void apei_estatus_print(const char *pfx, gedata_len = gdata->error_data_length; apei_estatus_print_section(pfx, gdata, sec_no); data_len -= gedata_len + sizeof(*gdata); + gdata = (void *)(gdata + 1) + gedata_len; sec_no++; } } @@ -396,6 +397,7 @@ int apei_estatus_check(const struct acpi_hest_generic_status *estatus) if (gedata_len > data_len - sizeof(*gdata)) return -EINVAL; data_len -= gedata_len + sizeof(*gdata); + gdata = (void *)(gdata + 1) + gedata_len; } if (data_len) return -EINVAL; -- cgit v0.10.2 From 8cdde126aa60ced0d63ff137378e09dd01dfadda Mon Sep 17 00:00:00 2001 From: Myron Stowe Date: Thu, 9 Feb 2012 09:36:41 -0700 Subject: ACPI: Fix logic for removing mappings in 'acpi_unmap' Make sure the removal of mappings uses the same logic that put the mappings in place. Signed-off-by: Myron Stowe Signed-off-by: Len Brown diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 412a1e0..5aef087 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -347,7 +347,7 @@ static void acpi_unmap(acpi_physical_address pg_off, void __iomem *vaddr) unsigned long pfn; pfn = pg_off >> PAGE_SHIFT; - if (page_is_ram(pfn)) + if (should_use_kmap(pfn)) kunmap(pfn_to_page(pfn)); else iounmap(vaddr); -- cgit v0.10.2 From f2d4753fbd4d15c65d6ba48167aa83916ddbe518 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Tue, 31 Jan 2012 13:19:19 -0500 Subject: ACPI: export acpi_kobj Drivers may wish to add entries to /sys/firmware/acpi, so export acpi_kobj in order to let them do that. Signed-off-by: Matthew Garrett Signed-off-by: Len Brown diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 9ecec98..3263b68 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -1010,6 +1010,7 @@ static int __init acpi_bus_init(void) } struct kobject *acpi_kobj; +EXPORT_SYMBOL_GPL(acpi_kobj); static int __init acpi_init(void) { -- cgit v0.10.2 From d1ff4b1cdbabb9ab9813f3d6e1cbec42cc5d6ed8 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Tue, 31 Jan 2012 13:19:20 -0500 Subject: ACPI: Add support for exposing BGRT data ACPI 5.0 adds the BGRT, a table that contains a pointer to the firmware boot splash and associated metadata. This simple driver exposes it via /sys/firmware/acpi in order to allow bootsplash applications to draw their splash around the firmware image and reduce the number of jarring graphical transitions during boot. Signed-off-by: Matthew Garrett Signed-off-by: Len Brown diff --git a/Documentation/ABI/testing/sysfs-firmware-acpi b/Documentation/ABI/testing/sysfs-firmware-acpi index 4f9ba3c..dd930c8 100644 --- a/Documentation/ABI/testing/sysfs-firmware-acpi +++ b/Documentation/ABI/testing/sysfs-firmware-acpi @@ -1,3 +1,23 @@ +What: /sys/firmware/acpi/bgrt/ +Date: January 2012 +Contact: Matthew Garrett +Description: + The BGRT is an ACPI 5.0 feature that allows the OS + to obtain a copy of the firmware boot splash and + some associated metadata. This is intended to be used + by boot splash applications in order to interact with + the firmware boot splash in order to avoid jarring + transitions. + + image: The image bitmap. Currently a 32-bit BMP. + status: 1 if the image is valid, 0 if firmware invalidated it. + type: 0 indicates image is in BMP format. + version: The version of the BGRT. Currently 1. + xoffset: The number of pixels between the left of the screen + and the left edge of the image. + yoffset: The number of pixels between the top of the screen + and the top edge of the image. + What: /sys/firmware/acpi/interrupts/ Date: February 2008 Contact: Len Brown diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 7556913..47768ff 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -384,6 +384,15 @@ config ACPI_CUSTOM_METHOD load additional kernel modules after boot, this feature may be used to override that restriction). +config ACPI_BGRT + tristate "Boottime Graphics Resource Table support" + default n + help + This driver adds support for exposing the ACPI Boottime Graphics + Resource Table, which allows the operating system to obtain + data from the firmware boot splash. It will appear under + /sys/firmware/acpi/bgrt/ . + source "drivers/acpi/apei/Kconfig" endif # ACPI diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 1567028..47199e2 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -62,6 +62,7 @@ obj-$(CONFIG_ACPI_SBS) += sbs.o obj-$(CONFIG_ACPI_HED) += hed.o obj-$(CONFIG_ACPI_EC_DEBUGFS) += ec_sys.o obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o +obj-$(CONFIG_ACPI_BGRT) += bgrt.o # processor has its own "processor." module_param namespace processor-y := processor_driver.o processor_throttling.o diff --git a/drivers/acpi/bgrt.c b/drivers/acpi/bgrt.c new file mode 100644 index 0000000..8cf6c46 --- /dev/null +++ b/drivers/acpi/bgrt.c @@ -0,0 +1,175 @@ +/* + * Copyright 2012 Red Hat, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +static struct acpi_table_bgrt *bgrt_tab; +static struct kobject *bgrt_kobj; + +struct bmp_header { + u16 id; + u32 size; +} __attribute ((packed)); + +static struct bmp_header bmp_header; + +static ssize_t show_version(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab->version); +} +static DEVICE_ATTR(version, S_IRUGO, show_version, NULL); + +static ssize_t show_status(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab->status); +} +static DEVICE_ATTR(status, S_IRUGO, show_status, NULL); + +static ssize_t show_type(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab->image_type); +} +static DEVICE_ATTR(type, S_IRUGO, show_type, NULL); + +static ssize_t show_xoffset(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab->image_offset_x); +} +static DEVICE_ATTR(xoffset, S_IRUGO, show_xoffset, NULL); + +static ssize_t show_yoffset(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab->image_offset_y); +} +static DEVICE_ATTR(yoffset, S_IRUGO, show_yoffset, NULL); + +static ssize_t show_image(struct file *file, struct kobject *kobj, + struct bin_attribute *attr, char *buf, loff_t off, size_t count) +{ + int size = attr->size; + void __iomem *image = attr->private; + + if (off >= size) { + count = 0; + } else { + if (off + count > size) + count = size - off; + + memcpy_fromio(buf, image+off, count); + } + + return count; +} + +static struct bin_attribute image_attr = { + .attr = { + .name = "image", + .mode = S_IRUGO, + }, + .read = show_image, +}; + +static struct attribute *bgrt_attributes[] = { + &dev_attr_version.attr, + &dev_attr_status.attr, + &dev_attr_type.attr, + &dev_attr_xoffset.attr, + &dev_attr_yoffset.attr, + NULL, +}; + +static struct attribute_group bgrt_attribute_group = { + .attrs = bgrt_attributes, +}; + +static int __init bgrt_init(void) +{ + acpi_status status; + int ret; + void __iomem *bgrt; + + if (acpi_disabled) + return -ENODEV; + + status = acpi_get_table("BGRT", 0, + (struct acpi_table_header **)&bgrt_tab); + + if (ACPI_FAILURE(status)) + return -ENODEV; + + sysfs_bin_attr_init(&image_attr); + + bgrt = ioremap(bgrt_tab->image_address, sizeof(struct bmp_header)); + + if (!bgrt) { + ret = -EINVAL; + goto out_err; + } + + memcpy_fromio(&bmp_header, bgrt, sizeof(bmp_header)); + image_attr.size = bmp_header.size; + iounmap(bgrt); + + image_attr.private = ioremap(bgrt_tab->image_address, image_attr.size); + + if (!image_attr.private) { + ret = -EINVAL; + goto out_err; + } + + + bgrt_kobj = kobject_create_and_add("bgrt", acpi_kobj); + if (!bgrt_kobj) { + ret = -EINVAL; + goto out_iounmap; + } + + ret = sysfs_create_group(bgrt_kobj, &bgrt_attribute_group); + if (ret) + goto out_kobject; + + ret = sysfs_create_bin_file(bgrt_kobj, &image_attr); + if (ret) + goto out_group; + + return 0; + +out_group: + sysfs_remove_group(bgrt_kobj, &bgrt_attribute_group); +out_kobject: + kobject_put(bgrt_kobj); +out_iounmap: + iounmap(image_attr.private); +out_err: + return ret; +} + +static void __exit bgrt_exit(void) +{ + iounmap(image_attr.private); + sysfs_remove_group(bgrt_kobj, &bgrt_attribute_group); + sysfs_remove_bin_file(bgrt_kobj, &image_attr); +} + +module_init(bgrt_init); +module_exit(bgrt_exit); + +MODULE_AUTHOR("Matthew Garrett"); +MODULE_DESCRIPTION("BGRT boot graphic support"); +MODULE_LICENSE("GPL"); -- cgit v0.10.2 From ea9f8856bd6d4ed45885b06a338f7362cd6c60e5 Mon Sep 17 00:00:00 2001 From: Igor Murzov Date: Fri, 30 Mar 2012 21:32:08 +0400 Subject: ACPI video: Harden video bus adding. It is always better to check return values, so add some new checks and correct existing ones. v2: Be consistent and don't mix errors from -E* and AE_* namespaces. Signed-off-by: Igor Murzov Signed-off-by: Len Brown diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index eaef02a..462486b 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -548,27 +548,27 @@ acpi_video_device_EDID(struct acpi_video_device *device, * 1. The system BIOS should NOT automatically control the brightness * level of the LCD when the power changes from AC to DC. * Return Value: - * -1 wrong arg. + * -EINVAL wrong arg. */ static int acpi_video_bus_DOS(struct acpi_video_bus *video, int bios_flag, int lcd_flag) { - u64 status = 0; + acpi_status status; union acpi_object arg0 = { ACPI_TYPE_INTEGER }; struct acpi_object_list args = { 1, &arg0 }; - if (bios_flag < 0 || bios_flag > 3 || lcd_flag < 0 || lcd_flag > 1) { - status = -1; - goto Failed; - } + if (bios_flag < 0 || bios_flag > 3 || lcd_flag < 0 || lcd_flag > 1) + return -EINVAL; arg0.integer.value = (lcd_flag << 2) | bios_flag; video->dos_setting = arg0.integer.value; - acpi_evaluate_object(video->device->handle, "_DOS", &args, NULL); + status = acpi_evaluate_object(video->device->handle, "_DOS", + &args, NULL); + if (ACPI_FAILURE(status)) + return -EIO; - Failed: - return status; + return 0; } /* @@ -1343,15 +1343,17 @@ static int acpi_video_bus_get_devices(struct acpi_video_bus *video, struct acpi_device *device) { - int status = 0; + int status; struct acpi_device *dev; - acpi_video_device_enumerate(video); + status = acpi_video_device_enumerate(video); + if (status) + return status; list_for_each_entry(dev, &device->children, node) { status = acpi_video_bus_get_one_device(dev, video); - if (ACPI_FAILURE(status)) { + if (status) { printk(KERN_WARNING PREFIX "Can't attach device\n"); continue; @@ -1653,8 +1655,12 @@ static int acpi_video_bus_add(struct acpi_device *device) mutex_init(&video->device_list_lock); INIT_LIST_HEAD(&video->video_device_list); - acpi_video_bus_get_devices(video, device); - acpi_video_bus_start_devices(video); + error = acpi_video_bus_get_devices(video, device); + if (error) + goto err_free_video; + error = acpi_video_bus_start_devices(video); + if (error) + goto err_put_video; video->input = input = input_allocate_device(); if (!input) { @@ -1692,14 +1698,19 @@ static int acpi_video_bus_add(struct acpi_device *device) video->pm_nb.notifier_call = acpi_video_resume; video->pm_nb.priority = 0; - register_pm_notifier(&video->pm_nb); + error = register_pm_notifier(&video->pm_nb); + if (error) + goto err_unregister_input_dev; return 0; + err_unregister_input_dev: + input_unregister_device(input); err_free_input_dev: input_free_device(input); err_stop_video: acpi_video_bus_stop_devices(video); + err_put_video: acpi_video_bus_put_devices(video); kfree(video->attached_array); err_free_video: -- cgit v0.10.2 From b60e7f6166857c76871977794fa266b02da1f394 Mon Sep 17 00:00:00 2001 From: Igor Murzov Date: Fri, 30 Mar 2012 21:32:09 +0400 Subject: ACPI video: Don't start video device until its associated input device has been allocated Quoth Dmitry Torokhov: In addition to bus notifier we do install device notifier explicitly so it might fire up early. The easiest fox would be to move acpi_video_bus_start_devices() after input_allocate_device() but before input_register_device() - unregistered input devices can handle input_event() calls just fine. May fix crashes reported in: https://bugzilla.kernel.org/show_bug.cgi?id=40672 Signed-off-by: Igor Murzov Signed-off-by: Len Brown diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 462486b..9577b6f 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1658,16 +1658,17 @@ static int acpi_video_bus_add(struct acpi_device *device) error = acpi_video_bus_get_devices(video, device); if (error) goto err_free_video; - error = acpi_video_bus_start_devices(video); - if (error) - goto err_put_video; video->input = input = input_allocate_device(); if (!input) { error = -ENOMEM; - goto err_stop_video; + goto err_put_video; } + error = acpi_video_bus_start_devices(video); + if (error) + goto err_free_input_dev; + snprintf(video->phys, sizeof(video->phys), "%s/video/input0", acpi_device_hid(video->device)); @@ -1688,7 +1689,7 @@ static int acpi_video_bus_add(struct acpi_device *device) error = input_register_device(input); if (error) - goto err_free_input_dev; + goto err_stop_video; printk(KERN_INFO PREFIX "%s [%s] (multi-head: %s rom: %s post: %s)\n", ACPI_VIDEO_DEVICE_NAME, acpi_device_bid(device), @@ -1706,10 +1707,10 @@ static int acpi_video_bus_add(struct acpi_device *device) err_unregister_input_dev: input_unregister_device(input); - err_free_input_dev: - input_free_device(input); err_stop_video: acpi_video_bus_stop_devices(video); + err_free_input_dev: + input_free_device(input); err_put_video: acpi_video_bus_put_devices(video); kfree(video->attached_array); -- cgit v0.10.2 From c264c651fd318274ffe27219947f17f24f07c073 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 6 Feb 2012 08:17:12 -0800 Subject: Disable MCP limit exceeded messages from Intel IPS driver On a system on the thermal limit these are quite noisy and flood the logs. Better would be a counter anyways. But given that we don't even have anything for normal throttling this doesn't seem to be urgent either. Reviewed-by: Jesse Barnes Signed-off-by: Andi Kleen Signed-off-by: Len Brown diff --git a/drivers/platform/x86/intel_ips.c b/drivers/platform/x86/intel_ips.c index 88a98cf..f7ba316e 100644 --- a/drivers/platform/x86/intel_ips.c +++ b/drivers/platform/x86/intel_ips.c @@ -609,25 +609,16 @@ static bool mcp_exceeded(struct ips_driver *ips) bool ret = false; u32 temp_limit; u32 avg_power; - const char *msg = "MCP limit exceeded: "; spin_lock_irqsave(&ips->turbo_status_lock, flags); temp_limit = ips->mcp_temp_limit * 100; - if (ips->mcp_avg_temp > temp_limit) { - dev_info(&ips->dev->dev, - "%sAvg temp %u, limit %u\n", msg, ips->mcp_avg_temp, - temp_limit); + if (ips->mcp_avg_temp > temp_limit) ret = true; - } avg_power = ips->cpu_avg_power + ips->mch_avg_power; - if (avg_power > ips->mcp_power_limit) { - dev_info(&ips->dev->dev, - "%sAvg power %u, limit %u\n", msg, avg_power, - ips->mcp_power_limit); + if (avg_power > ips->mcp_power_limit) ret = true; - } spin_unlock_irqrestore(&ips->turbo_status_lock, flags); -- cgit v0.10.2 From 344e222edf486bf42da1ced137e36df7a345b0ad Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 7 Mar 2012 14:57:36 +0300 Subject: ACPI throttling: fix endian bug in acpi_read_throttling_status() Using a u64 here creates an endian bug. We store a u32 number in the top byte which is a larger number than intended on big endian systems. There is no reason to use a 64 bit data type here, I guess it was just an oversight. I removed the initialization to zero as well. It's needed with a u64 but with a u32, the variable gets initialized properly inside the call to acpi_os_read_port(). Signed-off-by: Dan Carpenter Signed-off-by: Len Brown diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 605a295..1d02b7b 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -769,7 +769,7 @@ static int acpi_read_throttling_status(struct acpi_processor *pr, u64 *value) { u32 bit_width, bit_offset; - u64 ptc_value; + u32 ptc_value; u64 ptc_mask; struct acpi_processor_throttling *throttling; int ret = -1; @@ -777,12 +777,11 @@ static int acpi_read_throttling_status(struct acpi_processor *pr, throttling = &pr->throttling; switch (throttling->status_register.space_id) { case ACPI_ADR_SPACE_SYSTEM_IO: - ptc_value = 0; bit_width = throttling->status_register.bit_width; bit_offset = throttling->status_register.bit_offset; acpi_os_read_port((acpi_io_address) throttling->status_register. - address, (u32 *) &ptc_value, + address, &ptc_value, (u32) (bit_width + bit_offset)); ptc_mask = (1 << bit_width) - 1; *value = (u64) ((ptc_value >> bit_offset) & ptc_mask); -- cgit v0.10.2