From b755706cd726e5d465c28c2cd64c618419034981 Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Wed, 7 Dec 2011 11:47:40 -0800 Subject: ARM: OMAP2+: board-generic: Add missing handle_irq callbacks The following commit: 6b2f55d7851aa358d3a99cff344c560c4967f042, is adding the support for the CONFIG_MULTI_IRQ_HANDLER but did not update all the machine descriptors supported in the DT board-generic.c file. It thus break the DT boot on OMAP3 and OMAP4 boards. Add the proper handle_irq callbacks for OMAP3 and OMAP4 generic machine descriptors. Signed-off-by: Benoit Cousson Acked-by: Marc Zyngier Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 63b5416..e493877 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -17,6 +17,7 @@ #include #include +#include #include #include @@ -103,6 +104,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)") .map_io = omap242x_map_io, .init_early = omap2420_init_early, .init_irq = omap2_init_irq, + .handle_irq = omap2_intc_handle_irq, .init_machine = omap_generic_init, .timer = &omap2_timer, .dt_compat = omap242x_boards_compat, @@ -140,6 +142,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .map_io = omap3_map_io, .init_early = omap3430_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = omap3_init, .timer = &omap3_timer, .dt_compat = omap3_boards_compat, @@ -158,6 +161,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)") .map_io = omap4_map_io, .init_early = omap4430_init_early, .init_irq = gic_init_irq, + .handle_irq = gic_handle_irq, .init_machine = omap4_init, .timer = &omap4_timer, .dt_compat = omap4_boards_compat, -- cgit v0.10.2 From bfe75c7e67e5f32bf446a48e0502d06d25b51752 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 13 Jan 2012 16:27:38 +0900 Subject: sh: Defer to asm-generic/device.h. Now that the hwblk use cases have been ripped out, we can revert to asm-generic/device.h for the device/platform device arch data structures. Signed-off-by: Paul Mundt diff --git a/arch/sh/include/asm/device.h b/arch/sh/include/asm/device.h index a1c9c0d..071bcb4 100644 --- a/arch/sh/include/asm/device.h +++ b/arch/sh/include/asm/device.h @@ -3,9 +3,10 @@ * * This file is released under the GPLv2 */ +#ifndef __ASM_SH_DEVICE_H +#define __ASM_SH_DEVICE_H -struct dev_archdata { -}; +#include struct platform_device; /* allocate contiguous memory chunk and fill in struct resource */ @@ -14,5 +15,4 @@ int platform_resource_setup_memory(struct platform_device *pdev, void plat_early_device_setup(void); -struct pdev_archdata { -}; +#endif /* __ASM_SH_DEVICE_H */ -- cgit v0.10.2 From 6d7120a713300283a8b73e7d86cd1bab8b9d1971 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 13 Jan 2012 16:42:50 +0900 Subject: video: pvr2fb: Fix up spurious section mismatch warnings. pvr2fb special cases its init/exit routines which causes spurious section mismatches. Set the board_driver array __refdata to silence them. Signed-off-by: Paul Mundt diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c index f997510..3a3fdc6 100644 --- a/drivers/video/pvr2fb.c +++ b/drivers/video/pvr2fb.c @@ -1061,7 +1061,7 @@ static struct pvr2_board { int (*init)(void); void (*exit)(void); char name[16]; -} board_driver[] = { +} board_driver[] __refdata = { #ifdef CONFIG_SH_DREAMCAST { pvr2fb_dc_init, pvr2fb_dc_exit, "Sega DC PVR2" }, #endif -- cgit v0.10.2 From 78da107a7ed14fbc6ef77ff4c41d92b11edc9036 Mon Sep 17 00:00:00 2001 From: "Shimoda, Yoshihiro" Date: Tue, 17 Jan 2012 17:49:38 +0900 Subject: sh: fix the sh_mmcif_plat_data in board-sh7757lcr The board has an eMMC chip, so we cannot remove the chip. In this case, we have to set the MMC_CAP_NONREMOVABLE to the caps parameter. Reported-by: Guennadi Liakhovetski Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c index 0838154..33dc5b6 100644 --- a/arch/sh/boards/board-sh7757lcr.c +++ b/arch/sh/boards/board-sh7757lcr.c @@ -222,7 +222,8 @@ static struct sh_mmcif_dma sh7757lcr_mmcif_dma = { static struct sh_mmcif_plat_data sh_mmcif_plat = { .dma = &sh7757lcr_mmcif_dma, .sup_pclk = 0x0f, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | + MMC_CAP_NONREMOVABLE, .ocr = MMC_VDD_32_33 | MMC_VDD_33_34, }; -- cgit v0.10.2 From 0df1a838d678fc6ab49f983a19e905f6a42297a0 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 17 Jan 2012 20:05:40 +0900 Subject: ARM: mach-shmobile: sh73a0 PINT IRQ base fix Bump up the sh73a0 PINT IRQ base from 768 to 800 to avoid collision with INTCS vectors for IRQ16->IRQ32 at 0x3xxx. Without this fix the sh73a0 IRQ pin handling code collides with the PINT code which results in hangs on Kota2 during boot. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h index 881d515..cad5757 100644 --- a/arch/arm/mach-shmobile/include/mach/sh73a0.h +++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h @@ -515,8 +515,8 @@ enum { SHDMA_SLAVE_MMCIF_RX, }; -/* PINT interrupts are located at Linux IRQ 768 and up */ -#define SH73A0_PINT0_IRQ(irq) ((irq) + 768) -#define SH73A0_PINT1_IRQ(irq) ((irq) + 800) +/* PINT interrupts are located at Linux IRQ 800 and up */ +#define SH73A0_PINT0_IRQ(irq) ((irq) + 800) +#define SH73A0_PINT1_IRQ(irq) ((irq) + 832) #endif /* __ASM_SH73A0_H__ */ -- cgit v0.10.2 From e2c31b3fdd48274e9deb450e21279e54dfa02ccd Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 17 Jan 2012 20:10:49 +0900 Subject: ARM: mach-shmobile: sh73a0 IRQ sparse alloc fix Fix the sh73a0 external IRQ pin code to properly support CONFIG_SPARSE_IRQ=y by allocating IRQ descriptors for the cascaded IRQs associated with external IRQ pins. Without this fix it is impossible to request IRQ0->IRQ31 on the Kota2 board when sparse IRQs are enabled. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index 1eda6b0..9857595 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -445,6 +446,7 @@ void __init sh73a0_init_irq(void) setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]); n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k))); + WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n); irq_set_chip_and_handler_name(n, &intca_gic_irq_chip, handle_level_irq, "level"); set_irq_flags(n, IRQF_VALID); /* yuck */ -- cgit v0.10.2 From 2fde109c2d79e9791250a5d212c13055e9216a55 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 17 Jan 2012 20:14:07 +0900 Subject: ARM: mach-shmobile: IRQ driven GPIO key support for Kota2 Now when GPIO IRQs are supported on sh73a0 modify the Kota2 board code to switch from the polled "gpio-keys-polled" driver to the IRQ driven "gpio-keys" driver. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index 857ceee..c8e7ca2 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -143,11 +143,10 @@ static struct gpio_keys_button gpio_buttons[] = { static struct gpio_keys_platform_data gpio_key_info = { .buttons = gpio_buttons, .nbuttons = ARRAY_SIZE(gpio_buttons), - .poll_interval = 250, /* polled for now */ }; static struct platform_device gpio_keys_device = { - .name = "gpio-keys-polled", /* polled for now */ + .name = "gpio-keys", .id = -1, .dev = { .platform_data = &gpio_key_info, -- cgit v0.10.2 From d5bb386d70c8e8e79c7f652a794610e01d79f33e Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 30 Aug 2011 18:26:44 +0200 Subject: ARM: mach-shmobile: simplify MMCIF DMA configuration Use the simplified method to specify MMCIF DMA slave configuration. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index eff8a96..729eaee 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -159,19 +159,12 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh_mmcif_dma = { - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - }, - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, -}; static struct sh_mmcif_plat_data sh_mmcif_platdata = { .sup_pclk = 0, .ocr = MMC_VDD_165_195, .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, - .dma = &sh_mmcif_dma, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device mmc_device = { diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index aab0a34..eeb4d96 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -295,15 +295,6 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh_mmcif_dma = { - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - }, - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, -}; - static struct sh_mmcif_plat_data sh_mmcif_plat = { .sup_pclk = 0, .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, @@ -311,7 +302,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = { MMC_CAP_8_BIT_DATA | MMC_CAP_NEEDS_POLL, .get_cd = slot_cn7_get_cd, - .dma = &sh_mmcif_dma, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device sh_mmcif_device = { diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 9b42fbd..1a955e2 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -1184,15 +1184,6 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh_mmcif_dma = { - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - }, - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, -}; - static struct sh_mmcif_plat_data sh_mmcif_plat = { .sup_pclk = 0, .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, @@ -1200,7 +1191,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = { MMC_CAP_8_BIT_DATA | MMC_CAP_NEEDS_POLL, .get_cd = slot_cn7_get_cd, - .dma = &sh_mmcif_dma, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device sh_mmcif_device = { -- cgit v0.10.2 From 482835ce02726652becc36b64522cbabc0adbeee Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 18 Jan 2012 10:24:17 +0100 Subject: sh: sh7757lcr: update to the new MMCIF DMA configuration Specifying MMCIF DMA slave IDs via a struct sh_mmcif_dma instance is deprecated. Update sh7757lcr to specify slave IDs embedded in struct sh_mmcif_plat_data. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c index 33dc5b6..8d2ae10 100644 --- a/arch/sh/boards/board-sh7757lcr.c +++ b/arch/sh/boards/board-sh7757lcr.c @@ -210,21 +210,13 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh7757lcr_mmcif_dma = { - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - } -}; - static struct sh_mmcif_plat_data sh_mmcif_plat = { - .dma = &sh7757lcr_mmcif_dma, .sup_pclk = 0x0f, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, .ocr = MMC_VDD_32_33 | MMC_VDD_33_34, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device sh_mmcif_device = { -- cgit v0.10.2 From 833218f16b1fbfdff0dbb9ac477cf0c6e85cd4f5 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 18 Jan 2012 01:44:22 -0800 Subject: sh: clock-sh7724: fixup sh_fsi clock settings sh_fsi needs HWBLK_SPU clock on sh7724 Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c index b3c039a..70bd966 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c @@ -343,7 +343,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[HWBLK_CEU1]), CLKDEV_CON_ID("beu1", &mstp_clks[HWBLK_BEU1]), CLKDEV_CON_ID("2ddmac0", &mstp_clks[HWBLK_2DDMAC]), - CLKDEV_CON_ID("spu0", &mstp_clks[HWBLK_SPU]), + CLKDEV_DEV_ID("sh_fsi.0", &mstp_clks[HWBLK_SPU]), CLKDEV_CON_ID("jpu0", &mstp_clks[HWBLK_JPU]), CLKDEV_DEV_ID("sh-vou.0", &mstp_clks[HWBLK_VOU]), CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU0]), -- cgit v0.10.2 From 0ada2da51800a4914887a9bcf22d563be80e50be Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 18 Jan 2012 17:32:05 -0800 Subject: ARM: mach-shmobile: mackerel: use renesas_usbhs instead of r8a66597_hcd Current renesas_usbhs driver can use both USB host/gadget. This patch removes current r8a66597_hcd driver settings, and adds renesas_usbhs host driver settings for mackerel USB1 port. You can still use this port as "gadget" with small modify. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 9b42fbd..f0cc307 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -43,7 +43,6 @@ #include #include #include -#include #include #include @@ -145,11 +144,6 @@ * 1-2 short | VBUS 5V | Host * open | external VBUS | Function * - * *1 - * CN31 is used as - * CONFIG_USB_R8A66597_HCD Host - * CONFIG_USB_RENESAS_USBHS Function - * * CAUTION * * renesas_usbhs driver can use external interrupt mode @@ -161,15 +155,6 @@ * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0", * because Touchscreen is using IRQ7-PORT40. * It is impossible to use IRQ7 demux on this board. - * - * We can use external interrupt mode USB-Function on "USB1". - * USB1 can become Host by r8a66597, and become Function by renesas_usbhs. - * But don't select both drivers in same time. - * These uses same IRQ number for request_irq(), and aren't supporting - * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE. - * - * Actually these are old/new version of USB driver. - * This mean its register will be broken if it supports shared IRQ, */ /* @@ -676,51 +661,16 @@ static struct platform_device usbhs0_device = { * Use J30 to select between Host and Function. This setting * can however not be detected by software. Hotplug of USBHS1 * is provided via IRQ8. + * + * Current USB1 works as "USB Host". + * - set J30 "short" + * + * If you want to use it as "USB gadget", + * - J30 "open" + * - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET + * - add .get_vbus = usbhs_get_vbus in usbhs1_private */ #define IRQ8 evt2irq(0x0300) - -/* USBHS1 USB Host support via r8a66597_hcd */ -static void usb1_host_port_power(int port, int power) -{ - if (!power) /* only power-on is supported for now */ - return; - - /* set VBOUT/PWEN and EXTLP1 in DVSTCTR */ - __raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008); -} - -static struct r8a66597_platdata usb1_host_data = { - .on_chip = 1, - .port_power = usb1_host_port_power, -}; - -static struct resource usb1_host_resources[] = { - [0] = { - .name = "USBHS1", - .start = 0xe68b0000, - .end = 0xe68b00e6 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x1ce0) /* USB1_USB1I0 */, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device usb1_host_device = { - .name = "r8a66597_hcd", - .id = 1, - .dev = { - .dma_mask = NULL, /* not use dma */ - .coherent_dma_mask = 0xffffffff, - .platform_data = &usb1_host_data, - }, - .num_resources = ARRAY_SIZE(usb1_host_resources), - .resource = usb1_host_resources, -}; - -/* USBHS1 USB Function support via renesas_usbhs */ - #define USB_PHY_MODE (1 << 4) #define USB_PHY_INT_EN ((1 << 3) | (1 << 2)) #define USB_PHY_ON (1 << 1) @@ -776,7 +726,7 @@ static void usbhs1_hardware_exit(struct platform_device *pdev) static int usbhs1_get_id(struct platform_device *pdev) { - return USBHS_GADGET; + return USBHS_HOST; } static u32 usbhs1_pipe_cfg[] = { @@ -807,7 +757,6 @@ static struct usbhs_private usbhs1_private = { .hardware_exit = usbhs1_hardware_exit, .get_id = usbhs1_get_id, .phy_reset = usbhs_phy_reset, - .get_vbus = usbhs_get_vbus, }, .driver_param = { .buswait_bwait = 4, @@ -1311,7 +1260,6 @@ static struct platform_device *mackerel_devices[] __initdata = { &nor_flash_device, &smc911x_device, &lcdc_device, - &usb1_host_device, &usbhs1_device, &usbhs0_device, &leds_device, @@ -1473,9 +1421,6 @@ static void __init mackerel_init(void) gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */ gpio_request(GPIO_FN_IDIN_1_113, NULL); - /* USB phy tweak to make the r8a66597_hcd host driver work */ - __raw_writew(0x8a0a, 0xe6058130); /* USBCR4 */ - /* enable FSI2 port A (ak4643) */ gpio_request(GPIO_FN_FSIAIBT, NULL); gpio_request(GPIO_FN_FSIAILR, NULL); -- cgit v0.10.2 From 6d9b7dd0da1b619ed5f89ff7ab4bc3188c0f7e9f Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 18 Jan 2012 16:37:07 -0800 Subject: ARM: mach-shmobile: mackerel: add ak4642 amixer settings on comment current ak4642 needs amixer settings for playing which was not needed on old kernel. This patch show it on comment area Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index f0cc307..c4a6a9b 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -193,6 +193,16 @@ */ /* + * FSI - AK4642 + * + * it needs amixer settings for playing + * + * amixer set "Headphone" on + * amixer set "HPOUTL Mixer DACH" on + * amixer set "HPOUTR Mixer DACH" on + */ + +/* * FIXME !! * * gpio_no_direction -- cgit v0.10.2 From 26dd8e0291fd699142722632c6588a438d6ef0e4 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sat, 21 Jan 2012 00:15:23 +0900 Subject: percpu: use bitmap_clear Use bitmap_clear rather than clearing individual bits in a memory region. Signed-off-by: Akinobu Mita Acked-by: Christoph Lameter Signed-off-by: Tejun Heo diff --git a/mm/percpu-vm.c b/mm/percpu-vm.c index 12a48a88..405d331 100644 --- a/mm/percpu-vm.c +++ b/mm/percpu-vm.c @@ -184,8 +184,7 @@ static void pcpu_unmap_pages(struct pcpu_chunk *chunk, page_end - page_start); } - for (i = page_start; i < page_end; i++) - __clear_bit(i, populated); + bitmap_clear(populated, page_start, page_end - page_start); } /** -- cgit v0.10.2 From 620c231c7a7f48745094727bb612f6321cfc8844 Mon Sep 17 00:00:00 2001 From: Lucas De Marchi Date: Tue, 17 Jan 2012 14:50:51 -0200 Subject: kbuild: do not check for ancient modutils tools scripts/depmod.sh checks for the output of '-V' expecting that it has module-init-tools in it. It's a hack to prevent users from using modutils instead of module-init-tools, that only works with 2.4.x kernels. This however prints an annoying warning for kmod tool, that is currently replacing module-init-tools. Rather than putting another check for kmod's version, just remove it since users of 2.4.x kernel are unlikely to upgrade to 3.x, and if they do, let depmod fail in that case because they should know what they are doing. Signed-off-by: Lucas De Marchi Acked-by: WANG Cong Acked-By: Kay Sievers Signed-off-by: Michal Marek diff --git a/scripts/depmod.sh b/scripts/depmod.sh index a272356..2ae4817 100755 --- a/scripts/depmod.sh +++ b/scripts/depmod.sh @@ -9,12 +9,6 @@ fi DEPMOD=$1 KERNELRELEASE=$2 -if ! "$DEPMOD" -V 2>/dev/null | grep -q module-init-tools; then - echo "Warning: you may need to install module-init-tools" >&2 - echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt" >&2 - sleep 1 -fi - if ! test -r System.map -a -x "$DEPMOD"; then exit 0 fi -- cgit v0.10.2 From 04f47a03c51c9f02fa27b0ecf4207e25c0741804 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Sun, 22 Jan 2012 14:57:25 -0500 Subject: arm: fix compile failure in mach-shmobile/board-ag5evm.c Add videodev2 header which provides V4L2_PIX_FMT_RGB565 to fix: arch/arm/mach-shmobile/board-ag5evm.c:274: error: 'V4L2_PIX_FMT_RGB565' undeclared here (not in a function) Signed-off-by: Paul Gortmaker Signed-off-by: Paul Mundt diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index a4e6ca0..7559694 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include -- cgit v0.10.2 From f5948bac5f22e7697fc782e45bdca20a27368512 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 22 Jan 2012 21:10:02 -0800 Subject: ARM: mach-shmobile: clock-sh73a0: add DSIxPHY clock support Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index 729eaee..2e1334f 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -314,12 +314,11 @@ static struct resource mipidsi0_resources[] = { }, }; -#define DSI0PHYCR 0xe615006c static int sh_mipi_set_dot_clock(struct platform_device *pdev, void __iomem *base, int enable) { - struct clk *pck; + struct clk *pck, *phy; int ret; pck = clk_get(&pdev->dev, "dsip_clk"); @@ -328,18 +327,27 @@ static int sh_mipi_set_dot_clock(struct platform_device *pdev, goto sh_mipi_set_dot_clock_pck_err; } + phy = clk_get(&pdev->dev, "dsiphy_clk"); + if (IS_ERR(phy)) { + ret = PTR_ERR(phy); + goto sh_mipi_set_dot_clock_phy_err; + } + if (enable) { clk_set_rate(pck, clk_round_rate(pck, 24000000)); - __raw_writel(0x2a809010, DSI0PHYCR); + clk_set_rate(phy, clk_round_rate(pck, 510000000)); clk_enable(pck); + clk_enable(phy); } else { clk_disable(pck); + clk_disable(phy); } ret = 0; + clk_put(phy); +sh_mipi_set_dot_clock_phy_err: clk_put(pck); - sh_mipi_set_dot_clock_pck_err: return ret; } diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index afbead6..7727cca 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -365,6 +365,114 @@ static struct clk div6_clks[DIV6_NR] = { dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3), }; +/* DSI DIV */ +static unsigned long dsiphy_recalc(struct clk *clk) +{ + u32 value; + + value = __raw_readl(clk->mapping->base); + + /* FIXME */ + if (!(value & 0x000B8000)) + return clk->parent->rate; + + value &= 0x3f; + value += 1; + + if ((value < 12) || + (value > 33)) { + pr_err("DSIPHY has wrong value (%d)", value); + return 0; + } + + return clk->parent->rate / value; +} + +static long dsiphy_round_rate(struct clk *clk, unsigned long rate) +{ + return clk_rate_mult_range_round(clk, 12, 33, rate); +} + +static void dsiphy_disable(struct clk *clk) +{ + u32 value; + + value = __raw_readl(clk->mapping->base); + value &= ~0x000B8000; + + __raw_writel(value , clk->mapping->base); +} + +static int dsiphy_enable(struct clk *clk) +{ + u32 value; + int multi; + + value = __raw_readl(clk->mapping->base); + multi = (value & 0x3f) + 1; + + if ((multi < 12) || (multi > 33)) + return -EIO; + + __raw_writel(value | 0x000B8000, clk->mapping->base); + + return 0; +} + +static int dsiphy_set_rate(struct clk *clk, unsigned long rate) +{ + u32 value; + int idx; + + idx = rate / clk->parent->rate; + if ((idx < 12) || (idx > 33)) + return -EINVAL; + + idx += -1; + + value = __raw_readl(clk->mapping->base); + value = (value & ~0x3f) + idx; + + __raw_writel(value, clk->mapping->base); + + return 0; +} + +static struct clk_ops dsiphy_clk_ops = { + .recalc = dsiphy_recalc, + .round_rate = dsiphy_round_rate, + .set_rate = dsiphy_set_rate, + .enable = dsiphy_enable, + .disable = dsiphy_disable, +}; + +static struct clk_mapping dsi0phy_clk_mapping = { + .phys = DSI0PHYCR, + .len = 4, +}; + +static struct clk_mapping dsi1phy_clk_mapping = { + .phys = DSI1PHYCR, + .len = 4, +}; + +static struct clk dsi0phy_clk = { + .ops = &dsiphy_clk_ops, + .parent = &div6_clks[DIV6_DSI0P], /* late install */ + .mapping = &dsi0phy_clk_mapping, +}; + +static struct clk dsi1phy_clk = { + .ops = &dsiphy_clk_ops, + .parent = &div6_clks[DIV6_DSI1P], /* late install */ + .mapping = &dsi1phy_clk_mapping, +}; + +static struct clk *late_main_clks[] = { + &dsi0phy_clk, + &dsi1phy_clk, +}; + enum { MSTP001, MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100, MSTP219, @@ -429,6 +537,8 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]), CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]), CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]), + CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk), + CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk), /* MSTP32 clocks */ CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */ @@ -504,6 +614,9 @@ void __init sh73a0_clock_init(void) if (!ret) ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++) + ret = clk_register(late_main_clks[k]); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); if (!ret) -- cgit v0.10.2 From 4856f1946d1f404f6ff96857d5a895187d9caa8b Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 23 Jan 2012 15:52:03 +0100 Subject: ARM: mach-shmobile: add GPIO-to-IRQ translation to sh7372 This table is required to support the gpio_to_irq() translation. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c index 1bd6585..336093f 100644 --- a/arch/arm/mach-shmobile/pfc-sh7372.c +++ b/arch/arm/mach-shmobile/pfc-sh7372.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #define CPU_ALL_PORT(fn, pfx, sfx) \ @@ -1594,6 +1595,43 @@ static struct pinmux_data_reg pinmux_data_regs[] = { { }, }; +#define EXT_IRQ16L(n) evt2irq(0x200 + ((n) << 5)) +#define EXT_IRQ16H(n) evt2irq(0x3200 + (((n) - 16) << 5)) +static struct pinmux_irq pinmux_irqs[] = { + PINMUX_IRQ(EXT_IRQ16L(0), PORT6_FN0, PORT162_FN0), + PINMUX_IRQ(EXT_IRQ16L(1), PORT12_FN0), + PINMUX_IRQ(EXT_IRQ16L(2), PORT4_FN0, PORT5_FN0), + PINMUX_IRQ(EXT_IRQ16L(3), PORT8_FN0, PORT16_FN0), + PINMUX_IRQ(EXT_IRQ16L(4), PORT17_FN0, PORT163_FN0), + PINMUX_IRQ(EXT_IRQ16L(5), PORT18_FN0), + PINMUX_IRQ(EXT_IRQ16L(6), PORT39_FN0, PORT164_FN0), + PINMUX_IRQ(EXT_IRQ16L(7), PORT40_FN0, PORT167_FN0), + PINMUX_IRQ(EXT_IRQ16L(8), PORT41_FN0, PORT168_FN0), + PINMUX_IRQ(EXT_IRQ16L(9), PORT42_FN0, PORT169_FN0), + PINMUX_IRQ(EXT_IRQ16L(10), PORT65_FN0), + PINMUX_IRQ(EXT_IRQ16L(11), PORT67_FN0), + PINMUX_IRQ(EXT_IRQ16L(12), PORT80_FN0, PORT137_FN0), + PINMUX_IRQ(EXT_IRQ16L(13), PORT81_FN0, PORT145_FN0), + PINMUX_IRQ(EXT_IRQ16L(14), PORT82_FN0, PORT146_FN0), + PINMUX_IRQ(EXT_IRQ16L(15), PORT83_FN0, PORT147_FN0), + PINMUX_IRQ(EXT_IRQ16H(16), PORT84_FN0, PORT170_FN0), + PINMUX_IRQ(EXT_IRQ16H(17), PORT85_FN0), + PINMUX_IRQ(EXT_IRQ16H(18), PORT86_FN0), + PINMUX_IRQ(EXT_IRQ16H(19), PORT87_FN0), + PINMUX_IRQ(EXT_IRQ16H(20), PORT92_FN0), + PINMUX_IRQ(EXT_IRQ16H(21), PORT93_FN0), + PINMUX_IRQ(EXT_IRQ16H(22), PORT94_FN0), + PINMUX_IRQ(EXT_IRQ16H(23), PORT95_FN0), + PINMUX_IRQ(EXT_IRQ16H(24), PORT112_FN0), + PINMUX_IRQ(EXT_IRQ16H(25), PORT119_FN0), + PINMUX_IRQ(EXT_IRQ16H(26), PORT121_FN0, PORT172_FN0), + PINMUX_IRQ(EXT_IRQ16H(27), PORT122_FN0, PORT180_FN0), + PINMUX_IRQ(EXT_IRQ16H(28), PORT123_FN0, PORT181_FN0), + PINMUX_IRQ(EXT_IRQ16H(29), PORT129_FN0, PORT182_FN0), + PINMUX_IRQ(EXT_IRQ16H(30), PORT130_FN0, PORT183_FN0), + PINMUX_IRQ(EXT_IRQ16H(31), PORT138_FN0, PORT184_FN0), +}; + static struct pinmux_info sh7372_pinmux_info = { .name = "sh7372_pfc", .reserved_id = PINMUX_RESERVED, @@ -1614,6 +1652,9 @@ static struct pinmux_info sh7372_pinmux_info = { .gpio_data = pinmux_data, .gpio_data_size = ARRAY_SIZE(pinmux_data), + + .gpio_irq = pinmux_irqs, + .gpio_irq_size = ARRAY_SIZE(pinmux_irqs), }; void sh7372_pinmux_init(void) -- cgit v0.10.2 From 64dea57588f49736c2a7778292f3967c7984ab94 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 19 Jan 2012 01:00:40 -0800 Subject: sh: clkfwk: bugfix: use clk_reparent() for div6 clocks Various problems will happen if clk parent was set up directly. it should use clk_reparent() Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt diff --git a/drivers/sh/clk/cpg.c b/drivers/sh/clk/cpg.c index 45fee36..92d314a 100644 --- a/drivers/sh/clk/cpg.c +++ b/drivers/sh/clk/cpg.c @@ -190,7 +190,7 @@ static int __init sh_clk_init_parent(struct clk *clk) return -EINVAL; } - clk->parent = clk->parent_table[val]; + clk_reparent(clk, clk->parent_table[val]); if (!clk->parent) { pr_err("sh_clk_init_parent: unable to set parent"); return -EINVAL; -- cgit v0.10.2 From f02432571ad52fcfb7e7c676d81f902a0351a8af Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Thu, 22 Dec 2011 14:03:12 +0000 Subject: ARM: tegra: dma: fix buildbreak for !CONFIG_TEGRA_SYSTEM_DMA There's no need to keep the DMA_REQ_SEL defines inside the ifdef. Fixes the following build break with CONFIG_TEGRA_SYSTEM_DMA=n: arch/arm/mach-tegra/devices.c:645: error: 'TEGRA_DMA_REQ_SEL_I2S_1' undeclared here (not in a function) arch/arm/mach-tegra/devices.c:663: error: 'TEGRA_DMA_REQ_SEL_I2S2_1' undeclared here (not in a function) arch/arm/mach-tegra/devices.c:663: error: initializer element is not constant arch/arm/mach-tegra/devices.c:663: error: (near initialization for 'i2s_resource2[1].start') arch/arm/mach-tegra/devices.c:664: error: initializer element is not constant arch/arm/mach-tegra/devices.c:664: error: (near initialization for 'i2s_resource2[1].end') Signed-off-by: Olof Johansson Acked-by: Stephen Warren diff --git a/arch/arm/mach-tegra/include/mach/dma.h b/arch/arm/mach-tegra/include/mach/dma.h index d0132e8..3c9339058 100644 --- a/arch/arm/mach-tegra/include/mach/dma.h +++ b/arch/arm/mach-tegra/include/mach/dma.h @@ -23,11 +23,6 @@ #include -#if defined(CONFIG_TEGRA_SYSTEM_DMA) - -struct tegra_dma_req; -struct tegra_dma_channel; - #define TEGRA_DMA_REQ_SEL_CNTR 0 #define TEGRA_DMA_REQ_SEL_I2S_2 1 #define TEGRA_DMA_REQ_SEL_I2S_1 2 @@ -56,6 +51,11 @@ struct tegra_dma_channel; #define TEGRA_DMA_REQ_SEL_OWR 25 #define TEGRA_DMA_REQ_SEL_INVALID 31 +#if defined(CONFIG_TEGRA_SYSTEM_DMA) + +struct tegra_dma_req; +struct tegra_dma_channel; + enum tegra_dma_mode { TEGRA_DMA_SHARED = 1, TEGRA_DMA_MODE_CONTINOUS = 2, -- cgit v0.10.2 From 8791d63af0cf113725ae4cb8cba9492814c59a93 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Thu, 26 Jan 2012 12:04:11 -0300 Subject: [media] imon: don't wedge hardware after early callbacks This patch is just a minor update to one titled "imon: Input from ffdc device type ignored" from Corinna Vinschen. An earlier patch to prevent an oops when we got early callbacks also has the nasty side-effect of wedging imon hardware, as we don't acknowledge the urb. Rework the check slightly here to bypass processing the packet, as the driver isn't yet fully initialized, but still acknowlege the urb and submit a new rx_urb. Do this for both interfaces -- irrelevant for ffdc hardware, but relevant for newer hardware, though newer hardware doesn't spew the constant stream of data as soon as the hardware is initialized like the older ffdc devices, so they'd be less likely to trigger this anyway... Tested with both an ffdc device and an 0042 device. Reported-by: Corinna Vinschen Signed-off-by: Jarod Wilson CC: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c index 6ed9646..3f175eb 100644 --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -47,7 +47,7 @@ #define MOD_AUTHOR "Jarod Wilson " #define MOD_DESC "Driver for SoundGraph iMON MultiMedia IR/Display" #define MOD_NAME "imon" -#define MOD_VERSION "0.9.3" +#define MOD_VERSION "0.9.4" #define DISPLAY_MINOR_BASE 144 #define DEVICE_NAME "lcd%d" @@ -1658,9 +1658,17 @@ static void usb_rx_callback_intf0(struct urb *urb) return; ictx = (struct imon_context *)urb->context; - if (!ictx || !ictx->dev_present_intf0) + if (!ictx) return; + /* + * if we get a callback before we're done configuring the hardware, we + * can't yet process the data, as there's nowhere to send it, but we + * still need to submit a new rx URB to avoid wedging the hardware + */ + if (!ictx->dev_present_intf0) + goto out; + switch (urb->status) { case -ENOENT: /* usbcore unlink successful! */ return; @@ -1678,6 +1686,7 @@ static void usb_rx_callback_intf0(struct urb *urb) break; } +out: usb_submit_urb(ictx->rx_urb_intf0, GFP_ATOMIC); } @@ -1690,9 +1699,17 @@ static void usb_rx_callback_intf1(struct urb *urb) return; ictx = (struct imon_context *)urb->context; - if (!ictx || !ictx->dev_present_intf1) + if (!ictx) return; + /* + * if we get a callback before we're done configuring the hardware, we + * can't yet process the data, as there's nowhere to send it, but we + * still need to submit a new rx URB to avoid wedging the hardware + */ + if (!ictx->dev_present_intf1) + goto out; + switch (urb->status) { case -ENOENT: /* usbcore unlink successful! */ return; @@ -1710,6 +1727,7 @@ static void usb_rx_callback_intf1(struct urb *urb) break; } +out: usb_submit_urb(ictx->rx_urb_intf1, GFP_ATOMIC); } @@ -2242,7 +2260,7 @@ find_endpoint_failed: mutex_unlock(&ictx->lock); usb_free_urb(rx_urb); rx_urb_alloc_failed: - dev_err(ictx->dev, "unable to initialize intf0, err %d\n", ret); + dev_err(ictx->dev, "unable to initialize intf1, err %d\n", ret); return NULL; } -- cgit v0.10.2 From b7c9705cb799adabc0ae430943843e6c6e82617d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 27 Jan 2012 14:41:20 +0900 Subject: ARM: S3C64XX: Make s3c64xx_init_uarts() static Now that it's in common.c it's not used in multiple source files. Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c index 4a7394d..bee7dcd 100644 --- a/arch/arm/mach-s3c64xx/common.c +++ b/arch/arm/mach-s3c64xx/common.c @@ -49,7 +49,7 @@ /* uart registration process */ -void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) +static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) { s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no); } -- cgit v0.10.2 From 5d3a21990c58b68a31dcbf4c378231781c53bfc1 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 27 Jan 2012 14:43:44 +0900 Subject: ARM: S3C6410: Use device names for both I2C clocks When the S3C64xx CPUs were converted to clkdev mappings were added for the I2C controllers on them. On S3C6410 a device name is specified for I2C controller 1 but not for controller 0 which makes the code less robust as we'll falsely return the clock for controller 0 if there's an error in the request for controller 1. Improve things by registering a device name for controller 0 as well. Due to the fact that we change the numbering for controller 0 depending on if we've registered controller 1 this requires an ifdef to choose the name. Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index 31bb27d..aebbcc2 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -138,6 +138,11 @@ static struct clk init_clocks_off[] = { .ctrlbit = S3C_CLKCON_PCLK_TSADC, }, { .name = "i2c", +#ifdef CONFIG_S3C_DEV_I2C1 + .devname = "s3c2440-i2c.0", +#else + .devname = "s3c2440-i2c", +#endif .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_IIC, -- cgit v0.10.2 From 556ef3e474dd87d627655dafdf1e7eaf4747e388 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Fri, 27 Jan 2012 14:47:45 +0900 Subject: ARM: EXYNOS: fix non-SMP builds for EXYNOS4 This patch fixes the following build issue, which happens only if SMP has been disabled: arch/arm/mach-exynos/built-in.o: In function `exynos4_pm_resume': arch/arm/mach-exynos/pm.c:387: undefined reference to `scu_enable' Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index a4f61a4..2521b23 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -384,7 +384,9 @@ static void exynos4_pm_resume(void) exynos4_restore_pll(); +#ifdef CONFIG_SMP scu_enable(S5P_VA_SCU); +#endif #ifdef CONFIG_CACHE_L2X0 s3c_pm_do_restore_core(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save)); -- cgit v0.10.2 From 693cec9755e5198e0c291a4bfea6ebb1c7054550 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 27 Jan 2012 14:51:21 +0900 Subject: ARM: SAMSUNG: Fix platform data setup for I2C adapter 0 The common static default_i2c_data structure gets bus_num set by each s3c_i2c?_set_platdata() call, except for s3c_i2c0_set_platdata(). Thus if for instance s3c_i2c1_set_platdata() is called prior to s3c_i2c0_set_platdata() the I2C0 controller has bus_num set to wrong value of 1, i.e. the one from previous set_platdata call. Fix this by also setting bus_num for I2C0. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 32a6e39..f10768e 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -468,8 +468,10 @@ void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd) { struct s3c2410_platform_i2c *npd; - if (!pd) + if (!pd) { pd = &default_i2c_data; + pd->bus_num = 0; + } npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), &s3c_device_i2c0); -- cgit v0.10.2 From 7cdf04d7d4c0b5b205817ceb7a21c6e07d09ce11 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Fri, 27 Jan 2012 14:56:17 +0900 Subject: ARM: EXYNOS: Remove build warning without enabling PM Fixed following build warning with exynos4_defconfig. arch/arm/mach-exynos/clock.c:33: warning: 'exynos4_clock_save' defined but not used arch/arm/mach-exynos/clock-exynos4210.c:35: warning: 'exynos4210_clock_save' defined but not used arch/arm/mach-exynos/clock-exynos4212.c:35: warning: 'exynos4212_clock_save' defined but not used Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c index a5823a7..13312cc 100644 --- a/arch/arm/mach-exynos/clock-exynos4210.c +++ b/arch/arm/mach-exynos/clock-exynos4210.c @@ -32,6 +32,7 @@ #include "common.h" +#ifdef CONFIG_PM_SLEEP static struct sleep_save exynos4210_clock_save[] = { SAVE_ITEM(S5P_CLKSRC_IMAGE), SAVE_ITEM(S5P_CLKSRC_LCD1), @@ -42,6 +43,7 @@ static struct sleep_save exynos4210_clock_save[] = { SAVE_ITEM(S5P_CLKGATE_IP_LCD1), SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210), }; +#endif static struct clksrc_clk *sysclks[] = { /* nothing here yet */ diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c index 26a668b..48af285 100644 --- a/arch/arm/mach-exynos/clock-exynos4212.c +++ b/arch/arm/mach-exynos/clock-exynos4212.c @@ -32,12 +32,14 @@ #include "common.h" +#ifdef CONFIG_PM_SLEEP static struct sleep_save exynos4212_clock_save[] = { SAVE_ITEM(S5P_CLKSRC_IMAGE), SAVE_ITEM(S5P_CLKDIV_IMAGE), SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212), SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212), }; +#endif static struct clk *clk_src_mpll_user_list[] = { [0] = &clk_fin_mpll, diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c index 5a8c42e..187287a 100644 --- a/arch/arm/mach-exynos/clock.c +++ b/arch/arm/mach-exynos/clock.c @@ -30,6 +30,7 @@ #include "common.h" +#ifdef CONFIG_PM_SLEEP static struct sleep_save exynos4_clock_save[] = { SAVE_ITEM(S5P_CLKDIV_LEFTBUS), SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS), @@ -93,6 +94,7 @@ static struct sleep_save exynos4_clock_save[] = { SAVE_ITEM(S5P_CLKGATE_SCLKCPU), SAVE_ITEM(S5P_CLKGATE_IP_CPU), }; +#endif struct clk clk_sclk_hdmi27m = { .name = "sclk_hdmi27m", -- cgit v0.10.2 From a1ad803322a904a250fa901020b4a4dfaf51a829 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 25 Jan 2012 22:07:05 +0100 Subject: sh: se7724: fix compile breakage Fix compilation breakage arch/sh/boards/mach-se/7724/setup.c:182: error: 'V4L2_PIX_FMT_RGB565' undeclared here (not in a function) make[3]: *** [arch/sh/boards/mach-se/7724/setup.o] Error 1 caused by commit "fbdev: sh_mobile_lcdc: Support FOURCC-based format API" Also add other missing headers, even if compilation currently succeeds because of their indirect inclusion via other headers. Signed-off-by: Guennadi Liakhovetski Acked-by: Laurent Pinchart Signed-off-by: Paul Mundt diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c index 6418e95..ebd0f81 100644 --- a/arch/sh/boards/mach-ap325rxa/setup.c +++ b/arch/sh/boards/mach-ap325rxa/setup.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 033ef2b..cde7c00 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -29,9 +29,11 @@ #include #include #include +#include #include