From cd5de26288604cb8a6f7fba041cc5fb610cbff9e Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 1 Apr 2013 18:04:21 -0300 Subject: [media] pwc: Fix comment wrt lock ordering With all the changes to handle the locking in the v4l2-core rather then at the driver level, the order in which the 2 pwc locks need to be taken has changed, update the comment in the header file to correctly reflect this. Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/usb/pwc/pwc.h b/drivers/media/usb/pwc/pwc.h index 7a6a0d3..81b017a 100644 --- a/drivers/media/usb/pwc/pwc.h +++ b/drivers/media/usb/pwc/pwc.h @@ -226,7 +226,7 @@ struct pwc_device struct list_head queued_bufs; spinlock_t queued_bufs_lock; /* Protects queued_bufs */ - /* Note if taking both locks v4l2_lock must always be locked first! */ + /* If taking both locks vb_queue_lock must always be locked first! */ struct mutex v4l2_lock; /* Protects everything else */ struct mutex vb_queue_lock; /* Protects vb_queue and capt_file */ -- cgit v0.10.2 From 0391dc17bd5d7d6b1706d0be6472c4b352b57c05 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 29 Apr 2013 08:54:14 -0300 Subject: [media] gspca-sonixb: Adjust hstart on sn9c103 + pas202 For some unknown reason we need to increase hstart by 1 on when using the PAS202 on the sn9c103 (versus on the sn9c102), otherwise we get the wrong colors, due to shifting of the bayer pattern. Reported-by: Patrizio Bassi Tested-by: Patrizio Bassi Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/usb/gspca/sonixb.c b/drivers/media/usb/gspca/sonixb.c index 3fe207e..d7ff3b9 100644 --- a/drivers/media/usb/gspca/sonixb.c +++ b/drivers/media/usb/gspca/sonixb.c @@ -1159,6 +1159,13 @@ static int sd_start(struct gspca_dev *gspca_dev) regs[0x01] = 0x44; /* Select 24 Mhz clock */ regs[0x12] = 0x02; /* Set hstart to 2 */ } + break; + case SENSOR_PAS202: + /* For some unknown reason we need to increase hstart by 1 on + the sn9c103, otherwise we get wrong colors (bayer shift). */ + if (sd->bridge == BRIDGE_103) + regs[0x12] += 1; + break; } /* Disable compression when the raw bayer format has been selected */ if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_RAW) -- cgit v0.10.2 From e6c10b7c5e0e7c6ecf7d60f502c7eeaf3361b48f Mon Sep 17 00:00:00 2001 From: Krishna Mohan Date: Fri, 1 Mar 2013 11:35:31 +0000 Subject: libfcoe: Fix Conflicting FCFs issue in the fabric When multiple FCFs in use, and first FIP Advertisement received is with "Available for Login" i.e A bit set to 0, FCF selection will fail. The fix is to remove the assumption in the code that first FCF is only allowed selectable FCF. Consider the scenario fip->fcfs contains FCF1(fabricname X, marked A=0) FCF2(fabricname Y, marked A=1). list_first_entry(first) points to FCF1 and 1st iteration we ignore the FCF and on 2nd iteration we compare FCF1 & FCF2 fabric name and we fails to perform FCF selection. Signed-off-by: Krishna Mohan Reviewed-by: Bhanu Prakash Gollapudi Signed-off-by: Robert Love diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c index a762472..4c77641 100644 --- a/drivers/scsi/fcoe/fcoe_ctlr.c +++ b/drivers/scsi/fcoe/fcoe_ctlr.c @@ -1548,9 +1548,6 @@ static struct fcoe_fcf *fcoe_ctlr_select(struct fcoe_ctlr *fip) { struct fcoe_fcf *fcf; struct fcoe_fcf *best = fip->sel_fcf; - struct fcoe_fcf *first; - - first = list_first_entry(&fip->fcfs, struct fcoe_fcf, list); list_for_each_entry(fcf, &fip->fcfs, list) { LIBFCOE_FIP_DBG(fip, "consider FCF fab %16.16llx " @@ -1568,17 +1565,15 @@ static struct fcoe_fcf *fcoe_ctlr_select(struct fcoe_ctlr *fip) "" : "un"); continue; } - if (fcf->fabric_name != first->fabric_name || - fcf->vfid != first->vfid || - fcf->fc_map != first->fc_map) { + if (!best || fcf->pri < best->pri || best->flogi_sent) + best = fcf; + if (fcf->fabric_name != best->fabric_name || + fcf->vfid != best->vfid || + fcf->fc_map != best->fc_map) { LIBFCOE_FIP_DBG(fip, "Conflicting fabric, VFID, " "or FC-MAP\n"); return NULL; } - if (fcf->flogi_sent) - continue; - if (!best || fcf->pri < best->pri || best->flogi_sent) - best = fcf; } fip->sel_fcf = best; if (best) { -- cgit v0.10.2 From 732bdb9d141879b1b5b357f934553fe827c1f46b Mon Sep 17 00:00:00 2001 From: Mark Rustad Date: Wed, 20 Mar 2013 07:17:55 +0000 Subject: libfc: Correct check for initiator role The service_params field is being checked against the symbol FC_RPORT_ROLE_FCP_INITIATOR where it really should be checked against FCP_SPPF_INIT_FCN. Signed-off-by: Mark Rustad Tested-by: Jack Morgan Signed-off-by: Robert Love diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index d518d17..6bbb944 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -1962,7 +1962,7 @@ static int fc_rport_fcp_prli(struct fc_rport_priv *rdata, u32 spp_len, rdata->flags |= FC_RP_FLAGS_RETRY; rdata->supported_classes = FC_COS_CLASS3; - if (!(lport->service_params & FC_RPORT_ROLE_FCP_INITIATOR)) + if (!(lport->service_params & FCP_SPPF_INIT_FCN)) return 0; spp->spp_flags |= rspp->spp_flags & FC_SPP_EST_IMG_PAIR; -- cgit v0.10.2 From fb00cc2353ca22b3278f72d73e65a33486d1dbc7 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Fri, 3 May 2013 19:34:15 +0000 Subject: libfc: extend ex_lock to protect all of fc_seq_send This warning was reported recently: WARNING: at drivers/scsi/libfc/fc_exch.c:478 fc_seq_send+0x14f/0x160 [libfc]() (Not tainted) Hardware name: ProLiant DL120 G7 Modules linked in: tcm_fc target_core_iblock target_core_file target_core_pscsi target_core_mod configfs dm_round_robin dm_multipath 8021q garp stp llc bnx2fc cnic uio fcoe libfcoe libfc scsi_transport_fc scsi_tgt autofs4 sunrpc pcc_cpufreq ipv6 hpilo hpwdt e1000e microcode iTCO_wdt iTCO_vendor_support serio_raw shpchp ixgbe dca mdio sg ext4 mbcache jbd2 sd_mod crc_t10dif pata_acpi ata_generic ata_piix hpsa dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] Pid: 5464, comm: target_completi Not tainted 2.6.32-272.el6.x86_64 #1 Call Trace: [] ? warn_slowpath_common+0x87/0xc0 [] ? warn_slowpath_null+0x1a/0x20 [] ? fc_seq_send+0x14f/0x160 [libfc] [] ? ft_queue_status+0x16e/0x210 [tcm_fc] [] ? target_complete_ok_work+0x0/0x4b0 [target_core_mod] [] ? target_complete_ok_work+0x106/0x4b0 [target_core_mod] [] ? target_complete_ok_work+0x0/0x4b0 [target_core_mod] [] ? worker_thread+0x170/0x2a0 [] ? autoremove_wake_function+0x0/0x40 [] ? worker_thread+0x0/0x2a0 [] ? kthread+0x96/0xa0 [] ? child_rip+0xa/0x20 [] ? kthread+0x0/0xa0 [] ? child_rip+0x0/0x20 It occurs because fc_seq_send can have multiple contexts executing within it at the same time, and fc_seq_send doesn't consistently use the ep->ex_lock that protects this structure. Because of that, its possible for one context to clear the INIT bit in the ep->esb_state field while another checks it, leading to the above stack trace generated by the WARN_ON in the function. We should probably undertake the effort to convert access to the fc_exch structures to use rcu, but that a larger work item. To just fix this specific issue, we can just extend the ex_lock protection through the entire fc_seq_send path Signed-off-by: Neil Horman Reported-by: Gris Ge CC: Robert Love Signed-off-by: Robert Love diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index c772d8d..8b928c6 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -463,13 +463,7 @@ static void fc_exch_delete(struct fc_exch *ep) fc_exch_release(ep); /* drop hold for exch in mp */ } -/** - * fc_seq_send() - Send a frame using existing sequence/exchange pair - * @lport: The local port that the exchange will be sent on - * @sp: The sequence to be sent - * @fp: The frame to be sent on the exchange - */ -static int fc_seq_send(struct fc_lport *lport, struct fc_seq *sp, +static int fc_seq_send_locked(struct fc_lport *lport, struct fc_seq *sp, struct fc_frame *fp) { struct fc_exch *ep; @@ -479,7 +473,7 @@ static int fc_seq_send(struct fc_lport *lport, struct fc_seq *sp, u8 fh_type = fh->fh_type; ep = fc_seq_exch(sp); - WARN_ON((ep->esb_stat & ESB_ST_SEQ_INIT) != ESB_ST_SEQ_INIT); + WARN_ON(!(ep->esb_stat & ESB_ST_SEQ_INIT)); f_ctl = ntoh24(fh->fh_f_ctl); fc_exch_setup_hdr(ep, fp, f_ctl); @@ -502,17 +496,34 @@ static int fc_seq_send(struct fc_lport *lport, struct fc_seq *sp, error = lport->tt.frame_send(lport, fp); if (fh_type == FC_TYPE_BLS) - return error; + goto out; /* * Update the exchange and sequence flags, * assuming all frames for the sequence have been sent. * We can only be called to send once for each sequence. */ - spin_lock_bh(&ep->ex_lock); ep->f_ctl = f_ctl & ~FC_FC_FIRST_SEQ; /* not first seq */ if (f_ctl & FC_FC_SEQ_INIT) ep->esb_stat &= ~ESB_ST_SEQ_INIT; +out: + return error; +} + +/** + * fc_seq_send() - Send a frame using existing sequence/exchange pair + * @lport: The local port that the exchange will be sent on + * @sp: The sequence to be sent + * @fp: The frame to be sent on the exchange + */ +static int fc_seq_send(struct fc_lport *lport, struct fc_seq *sp, + struct fc_frame *fp) +{ + struct fc_exch *ep; + int error; + ep = fc_seq_exch(sp); + spin_lock_bh(&ep->ex_lock); + error = fc_seq_send_locked(lport, sp, fp); spin_unlock_bh(&ep->ex_lock); return error; } @@ -629,7 +640,7 @@ static int fc_exch_abort_locked(struct fc_exch *ep, if (fp) { fc_fill_fc_hdr(fp, FC_RCTL_BA_ABTS, ep->did, ep->sid, FC_TYPE_BLS, FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0); - error = fc_seq_send(ep->lp, sp, fp); + error = fc_seq_send_locked(ep->lp, sp, fp); } else error = -ENOBUFS; return error; @@ -1132,7 +1143,7 @@ static void fc_seq_send_last(struct fc_seq *sp, struct fc_frame *fp, f_ctl = FC_FC_LAST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT; f_ctl |= ep->f_ctl; fc_fill_fc_hdr(fp, rctl, ep->did, ep->sid, fh_type, f_ctl, 0); - fc_seq_send(ep->lp, sp, fp); + fc_seq_send_locked(ep->lp, sp, fp); } /** @@ -1307,8 +1318,8 @@ static void fc_exch_recv_abts(struct fc_exch *ep, struct fc_frame *rx_fp) ap->ba_low_seq_cnt = htons(sp->cnt); } sp = fc_seq_start_next_locked(sp); - spin_unlock_bh(&ep->ex_lock); fc_seq_send_last(sp, fp, FC_RCTL_BA_ACC, FC_TYPE_BLS); + spin_unlock_bh(&ep->ex_lock); fc_frame_free(rx_fp); return; -- cgit v0.10.2 From f4aaea6d5106f6092a80a648b5a12d31b6cb3335 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Fri, 3 May 2013 19:38:10 +0000 Subject: MAINTAINERS: Fix fcoe mailing list The FCoE mailing list has moved, updte it in the MAINTAINERS file Signed-off-by: Neil Horman CC: Robert Love Signed-off-by: Robert Love diff --git a/MAINTAINERS b/MAINTAINERS index 8bdd7a7..bde678d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3165,7 +3165,7 @@ F: lib/fault-inject.c FCOE SUBSYSTEM (libfc, libfcoe, fcoe) M: Robert Love -L: devel@open-fcoe.org +L: fcoe-devel@open-fcoe.org W: www.Open-FCoE.org S: Supported F: drivers/scsi/libfc/ -- cgit v0.10.2 From 364398324c901bc834f762eb5443d2e5a1d2a0db Mon Sep 17 00:00:00 2001 From: "gurinder.shergill@hp.com" Date: Tue, 23 Apr 2013 10:13:17 -0700 Subject: [SCSI] qla2xxx: Fix for locking issue between driver ISR and mailbox routines The driver uses ha->mbx_cmd_flags variable to pass information between its ISR and mailbox routines, however, it does so without the protection of any locks. Under certain conditions, this can lead to multiple mailbox command completions being signaled, which, in turn, leads to a false mailbox timeout error for the subsequently issued mailbox command. The issue occurs frequently but intermittenly with the Qlogic 8GFC mezz card during card initialization, resulting in card initialization failure. Signed-off-by: Gurinder (Sunny) Shergill Acked-by: Saurav Kashyap Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h index 98ab921..0a5c895 100644 --- a/drivers/scsi/qla2xxx/qla_inline.h +++ b/drivers/scsi/qla2xxx/qla_inline.h @@ -278,3 +278,14 @@ qla2x00_do_host_ramp_up(scsi_qla_host_t *vha) set_bit(HOST_RAMP_UP_QUEUE_DEPTH, &vha->dpc_flags); } + +static inline void +qla2x00_handle_mbx_completion(struct qla_hw_data *ha, int status) +{ + if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) && + (status & MBX_INTERRUPT) && ha->flags.mbox_int) { + set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags); + clear_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags); + complete(&ha->mbx_intr_comp); + } +} diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 259d920..d2a4c75 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -104,14 +104,9 @@ qla2100_intr_handler(int irq, void *dev_id) RD_REG_WORD(®->hccr); } } + qla2x00_handle_mbx_completion(ha, status); spin_unlock_irqrestore(&ha->hardware_lock, flags); - if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) && - (status & MBX_INTERRUPT) && ha->flags.mbox_int) { - set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags); - complete(&ha->mbx_intr_comp); - } - return (IRQ_HANDLED); } @@ -221,14 +216,9 @@ qla2300_intr_handler(int irq, void *dev_id) WRT_REG_WORD(®->hccr, HCCR_CLR_RISC_INT); RD_REG_WORD_RELAXED(®->hccr); } + qla2x00_handle_mbx_completion(ha, status); spin_unlock_irqrestore(&ha->hardware_lock, flags); - if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) && - (status & MBX_INTERRUPT) && ha->flags.mbox_int) { - set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags); - complete(&ha->mbx_intr_comp); - } - return (IRQ_HANDLED); } @@ -2613,14 +2603,9 @@ qla24xx_intr_handler(int irq, void *dev_id) if (unlikely(IS_QLA83XX(ha) && (ha->pdev->revision == 1))) ndelay(3500); } + qla2x00_handle_mbx_completion(ha, status); spin_unlock_irqrestore(&ha->hardware_lock, flags); - if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) && - (status & MBX_INTERRUPT) && ha->flags.mbox_int) { - set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags); - complete(&ha->mbx_intr_comp); - } - return IRQ_HANDLED; } @@ -2763,13 +2748,9 @@ qla24xx_msix_default(int irq, void *dev_id) } WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT); } while (0); + qla2x00_handle_mbx_completion(ha, status); spin_unlock_irqrestore(&ha->hardware_lock, flags); - if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) && - (status & MBX_INTERRUPT) && ha->flags.mbox_int) { - set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags); - complete(&ha->mbx_intr_comp); - } return IRQ_HANDLED; } diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 9e5d89d..3587ec2 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -179,8 +179,6 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) wait_for_completion_timeout(&ha->mbx_intr_comp, mcp->tov * HZ); - clear_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags); - } else { ql_dbg(ql_dbg_mbx, vha, 0x1011, "Cmd=%x Polling Mode.\n", command); diff --git a/drivers/scsi/qla2xxx/qla_mr.c b/drivers/scsi/qla2xxx/qla_mr.c index 937fed8..a6df558 100644 --- a/drivers/scsi/qla2xxx/qla_mr.c +++ b/drivers/scsi/qla2xxx/qla_mr.c @@ -148,9 +148,6 @@ qlafx00_mailbox_command(scsi_qla_host_t *vha, struct mbx_cmd_32 *mcp) spin_unlock_irqrestore(&ha->hardware_lock, flags); wait_for_completion_timeout(&ha->mbx_intr_comp, mcp->tov * HZ); - - clear_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags); - } else { ql_dbg(ql_dbg_mbx, vha, 0x112c, "Cmd=%x Polling Mode.\n", command); @@ -2934,13 +2931,10 @@ qlafx00_intr_handler(int irq, void *dev_id) QLAFX00_CLR_INTR_REG(ha, clr_intr); QLAFX00_RD_INTR_REG(ha); } + + qla2x00_handle_mbx_completion(ha, status); spin_unlock_irqrestore(&ha->hardware_lock, flags); - if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) && - (status & MBX_INTERRUPT) && ha->flags.mbox_int) { - set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags); - complete(&ha->mbx_intr_comp); - } return IRQ_HANDLED; } diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c index 10754f51..cce0cd0 100644 --- a/drivers/scsi/qla2xxx/qla_nx.c +++ b/drivers/scsi/qla2xxx/qla_nx.c @@ -2074,9 +2074,6 @@ qla82xx_intr_handler(int irq, void *dev_id) } WRT_REG_DWORD(®->host_int, 0); } - spin_unlock_irqrestore(&ha->hardware_lock, flags); - if (!ha->flags.msi_enabled) - qla82xx_wr_32(ha, ha->nx_legacy_intr.tgt_mask_reg, 0xfbff); #ifdef QL_DEBUG_LEVEL_17 if (!irq && ha->flags.eeh_busy) @@ -2085,11 +2082,12 @@ qla82xx_intr_handler(int irq, void *dev_id) status, ha->mbx_cmd_flags, ha->flags.mbox_int, stat); #endif - if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) && - (status & MBX_INTERRUPT) && ha->flags.mbox_int) { - set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags); - complete(&ha->mbx_intr_comp); - } + qla2x00_handle_mbx_completion(ha, status); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + if (!ha->flags.msi_enabled) + qla82xx_wr_32(ha, ha->nx_legacy_intr.tgt_mask_reg, 0xfbff); + return IRQ_HANDLED; } @@ -2149,8 +2147,6 @@ qla82xx_msix_default(int irq, void *dev_id) WRT_REG_DWORD(®->host_int, 0); } while (0); - spin_unlock_irqrestore(&ha->hardware_lock, flags); - #ifdef QL_DEBUG_LEVEL_17 if (!irq && ha->flags.eeh_busy) ql_log(ql_log_warn, vha, 0x5044, @@ -2158,11 +2154,9 @@ qla82xx_msix_default(int irq, void *dev_id) status, ha->mbx_cmd_flags, ha->flags.mbox_int, stat); #endif - if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) && - (status & MBX_INTERRUPT) && ha->flags.mbox_int) { - set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags); - complete(&ha->mbx_intr_comp); - } + qla2x00_handle_mbx_completion(ha, status); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + return IRQ_HANDLED; } @@ -3345,7 +3339,7 @@ void qla82xx_clear_pending_mbx(scsi_qla_host_t *vha) ha->flags.mbox_busy = 0; ql_log(ql_log_warn, vha, 0x6010, "Doing premature completion of mbx command.\n"); - if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags)) + if (test_and_clear_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags)) complete(&ha->mbx_intr_comp); } } -- cgit v0.10.2 From 222ab5946860e1d77870ffbfebebff2bcb1f4215 Mon Sep 17 00:00:00 2001 From: "wenxiong@linux.vnet.ibm.com" Date: Thu, 14 Mar 2013 13:52:25 -0500 Subject: [SCSI] ipr: Avoid target_destroy accessing memory after it was freed Defined target_ids,array_ids and vsets_ids as unsigned long to avoid target_destroy accessing memory after it was freed. Signed-off-by: Wen Xiong Signed-off-by: James Bottomley diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 82a3c1e..6c4cedb 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -8980,19 +8980,6 @@ static int ipr_alloc_mem(struct ipr_ioa_cfg *ioa_cfg) if (!ioa_cfg->res_entries) goto out; - if (ioa_cfg->sis64) { - ioa_cfg->target_ids = kzalloc(sizeof(unsigned long) * - BITS_TO_LONGS(ioa_cfg->max_devs_supported), GFP_KERNEL); - ioa_cfg->array_ids = kzalloc(sizeof(unsigned long) * - BITS_TO_LONGS(ioa_cfg->max_devs_supported), GFP_KERNEL); - ioa_cfg->vset_ids = kzalloc(sizeof(unsigned long) * - BITS_TO_LONGS(ioa_cfg->max_devs_supported), GFP_KERNEL); - - if (!ioa_cfg->target_ids || !ioa_cfg->array_ids - || !ioa_cfg->vset_ids) - goto out_free_res_entries; - } - for (i = 0; i < ioa_cfg->max_devs_supported; i++) { list_add_tail(&ioa_cfg->res_entries[i].queue, &ioa_cfg->free_res_q); ioa_cfg->res_entries[i].ioa_cfg = ioa_cfg; @@ -9089,9 +9076,6 @@ out_free_vpd_cbs: ioa_cfg->vpd_cbs, ioa_cfg->vpd_cbs_dma); out_free_res_entries: kfree(ioa_cfg->res_entries); - kfree(ioa_cfg->target_ids); - kfree(ioa_cfg->array_ids); - kfree(ioa_cfg->vset_ids); goto out; } diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h index a1fb840..07a85ce 100644 --- a/drivers/scsi/ipr.h +++ b/drivers/scsi/ipr.h @@ -1440,9 +1440,9 @@ struct ipr_ioa_cfg { /* * Bitmaps for SIS64 generated target values */ - unsigned long *target_ids; - unsigned long *array_ids; - unsigned long *vset_ids; + unsigned long target_ids[BITS_TO_LONGS(IPR_MAX_SIS64_DEVS)]; + unsigned long array_ids[BITS_TO_LONGS(IPR_MAX_SIS64_DEVS)]; + unsigned long vset_ids[BITS_TO_LONGS(IPR_MAX_SIS64_DEVS)]; u16 type; /* CCIN of the card */ -- cgit v0.10.2 From bdea0d222a21f864a811cf6666532334e622f7c6 Mon Sep 17 00:00:00 2001 From: "Lad, Prabhakar" Date: Tue, 7 May 2013 01:07:25 -0300 Subject: [media] media: davinci: vpbe: fix layer availability for NV12 format For NV12 format, even if display data is single image, both VIDWIN0 and VIDWIN1 parameters must be used. The start address of Y data plane and C data plane is configured in VIDEOWIN0ADH/L and VIDEOWIN1ADH/L respectively. cuurently only one layer was requested, which is suffice for yuv422, but for yuv420(NV12) two layers are required and fix the same by requesting for other layer if pix fmt is NV12 during set_fmt. Signed-off-by: Lad, Prabhakar Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/davinci/vpbe_display.c b/drivers/media/platform/davinci/vpbe_display.c index 1802f11..d0b375c 100644 --- a/drivers/media/platform/davinci/vpbe_display.c +++ b/drivers/media/platform/davinci/vpbe_display.c @@ -916,6 +916,21 @@ static int vpbe_display_s_fmt(struct file *file, void *priv, other video window */ layer->pix_fmt = *pixfmt; + if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12) { + struct vpbe_layer *otherlayer; + + otherlayer = _vpbe_display_get_other_win_layer(disp_dev, layer); + /* if other layer is available, only + * claim it, do not configure it + */ + ret = osd_device->ops.request_layer(osd_device, + otherlayer->layer_info.id); + if (ret < 0) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Display Manager failed to allocate layer\n"); + return -EBUSY; + } + } /* Get osd layer config */ osd_device->ops.get_layer_config(osd_device, -- cgit v0.10.2 From 39e219d9292958460c3229df29995454414ce626 Mon Sep 17 00:00:00 2001 From: "Lad, Prabhakar" Date: Fri, 10 May 2013 00:48:38 -0300 Subject: [media] davinci: vpfe: fix error path in probe The error path on failure was calling mutex_unlock(), but there was no actuall call before for mutex_lock(). This patch fixes this issue by pointing it to proper go label. Reported-by: Jose Pablo Carballo Signed-off-by: Lad, Prabhakar Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/davinci/vpfe_capture.c b/drivers/media/platform/davinci/vpfe_capture.c index 8c50d30..3827fe1 100644 --- a/drivers/media/platform/davinci/vpfe_capture.c +++ b/drivers/media/platform/davinci/vpfe_capture.c @@ -1837,7 +1837,7 @@ static int vpfe_probe(struct platform_device *pdev) if (NULL == ccdc_cfg) { v4l2_err(pdev->dev.driver, "Memory allocation failed for ccdc_cfg\n"); - goto probe_free_lock; + goto probe_free_dev_mem; } mutex_lock(&ccdc_lock); -- cgit v0.10.2 From 96f83b3f270aff148a1fa55f9a464e1bbadeadd4 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 7 May 2013 07:51:21 -0300 Subject: [media] davinci: vpfe: fix error return code in vpfe_probe() Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Acked-by: Lad, Prabhakar Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/staging/media/davinci_vpfe/vpfe_mc_capture.c b/drivers/staging/media/davinci_vpfe/vpfe_mc_capture.c index b88e1dd..d8ce20d 100644 --- a/drivers/staging/media/davinci_vpfe/vpfe_mc_capture.c +++ b/drivers/staging/media/davinci_vpfe/vpfe_mc_capture.c @@ -639,7 +639,8 @@ static int vpfe_probe(struct platform_device *pdev) if (ret) goto probe_free_dev_mem; - if (vpfe_initialize_modules(vpfe_dev, pdev)) + ret = vpfe_initialize_modules(vpfe_dev, pdev); + if (ret) goto probe_disable_clock; vpfe_dev->media_dev.dev = vpfe_dev->pdev; @@ -663,7 +664,8 @@ static int vpfe_probe(struct platform_device *pdev) /* set the driver data in platform device */ platform_set_drvdata(pdev, vpfe_dev); /* register subdevs/entities */ - if (vpfe_register_entities(vpfe_dev)) + ret = vpfe_register_entities(vpfe_dev); + if (ret) goto probe_out_v4l2_unregister; ret = vpfe_attach_irq(vpfe_dev); -- cgit v0.10.2 From ab6717886b6af7c1408602948653c63408c46f5e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 8 May 2013 16:23:41 -0300 Subject: [media] v4l2: SI476X MFD - Do not use binary constants Gcc < 4.3 doesn't understand binary constanrs (0b*): drivers/media/radio/radio-si476x.c:862:20: error: invalid suffix "b10000000" on integer constant Hence use a hexadecimal constant (0x*) instead. Signed-off-by: Geert Uytterhoeven Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/radio/radio-si476x.c b/drivers/media/radio/radio-si476x.c index 9430c6a..9dc8baf 100644 --- a/drivers/media/radio/radio-si476x.c +++ b/drivers/media/radio/radio-si476x.c @@ -44,7 +44,7 @@ #define FREQ_MUL (10000000 / 625) -#define SI476X_PHDIV_STATUS_LINK_LOCKED(status) (0b10000000 & (status)) +#define SI476X_PHDIV_STATUS_LINK_LOCKED(status) (0x80 & (status)) #define DRIVER_NAME "si476x-radio" #define DRIVER_CARD "SI476x AM/FM Receiver" -- cgit v0.10.2 From ea457ad9dbf32c8d22cc1cc39b4c1a2e06bf9b89 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 2 May 2013 11:16:26 -0300 Subject: [media] radio-si476x: depend on SND_SOC It is not possible to select SND_SOC_SI476X if we have not also enabled SND_SOC. warning: (RADIO_SI476X) selects SND_SOC_SI476X which has unmet direct dependencies (SOUND && !M68K && !UML && SND && SND_SOC) Signed-off-by: Arnd Bergmann [hans.verkuil@cisco.com: fixed wrong driver name in subject] Acked-by: Mauro Carvalho Chehab Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index c0beee2..d529ba7 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -22,6 +22,7 @@ config RADIO_SI476X tristate "Silicon Laboratories Si476x I2C FM Radio" depends on I2C && VIDEO_V4L2 depends on MFD_SI476X_CORE + depends on SND_SOC select SND_SOC_SI476X ---help--- Choose Y here if you have this FM radio chip. -- cgit v0.10.2 From 6e7df1cd373d688486b0b0b6626cb32f59ebdcfa Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 7 May 2013 08:06:11 -0300 Subject: [media] DocBook: media: update codec section, drop obsolete 'suspended' state The Codec section in the V4L2 specification was marked as 'suspended', even though codec support has been around for quite some time. Update this section, explaining a bit about memory-to-memory devices and pointing to the MPEG controls section. Signed-off-by: Hans Verkuil Acked-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/DocBook/media/v4l/dev-codec.xml b/Documentation/DocBook/media/v4l/dev-codec.xml index dca0ecd..ff44c16 100644 --- a/Documentation/DocBook/media/v4l/dev-codec.xml +++ b/Documentation/DocBook/media/v4l/dev-codec.xml @@ -1,18 +1,27 @@ Codec Interface - - Suspended + A V4L2 codec can compress, decompress, transform, or otherwise +convert video data from one format into another format, in memory. Typically +such devices are memory-to-memory devices (i.e. devices with the +V4L2_CAP_VIDEO_M2M or V4L2_CAP_VIDEO_M2M_MPLANE +capability set). + - This interface has been be suspended from the V4L2 API -implemented in Linux 2.6 until we have more experience with codec -device interfaces. - + A memory-to-memory video node acts just like a normal video node, but it +supports both output (sending frames from memory to the codec hardware) and +capture (receiving the processed frames from the codec hardware into memory) +stream I/O. An application will have to setup the stream +I/O for both sides and finally call &VIDIOC-STREAMON; for both capture and output +to start the codec. - A V4L2 codec can compress, decompress, transform, or otherwise -convert video data from one format into another format, in memory. -Applications send data to be converted to the driver through a -&func-write; call, and receive the converted data through a -&func-read; call. For efficiency a driver may also support streaming -I/O. + Video compression codecs use the MPEG controls to setup their codec parameters +(note that the MPEG controls actually support many more codecs than just MPEG). +See . - [to do] + Memory-to-memory devices can often be used as a shared resource: you can +open the video node multiple times, each application setting up their own codec properties +that are local to the file handle, and each can use it independently from the others. +The driver will arbitrate access to the codec and reprogram it whenever another file +handler gets access. This is different from the usual video node behavior where the video properties +are global to the device (i.e. changing something through one file handle is visible +through another file handle). -- cgit v0.10.2 From a2ac2d792cb6a22eb86ef4e026ba74c3ea6e67ee Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 10 May 2013 07:53:08 -0300 Subject: [media] vpfe-capture.c: remove unused label probe_free_lock Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/davinci/vpfe_capture.c b/drivers/media/platform/davinci/vpfe_capture.c index 3827fe1..9360909 100644 --- a/drivers/media/platform/davinci/vpfe_capture.c +++ b/drivers/media/platform/davinci/vpfe_capture.c @@ -1991,7 +1991,6 @@ probe_out_release_irq: free_irq(vpfe_dev->ccdc_irq0, vpfe_dev); probe_free_ccdc_cfg_mem: kfree(ccdc_cfg); -probe_free_lock: mutex_unlock(&ccdc_lock); probe_free_dev_mem: kfree(vpfe_dev); -- cgit v0.10.2 From 2031941502339d548cd51bf34e6ebb8bc3bb2d89 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 26 Apr 2013 04:52:57 -0300 Subject: [media] exynos4-is: Fix potential null pointer dereference in mipi-csis.c When 'node' is NULL, the print statement tries to dereference it. Hence replace the variable with the one that is accessible. Signed-off-by: Sachin Kamat Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c b/drivers/media/platform/exynos4-is/mipi-csis.c index a2eda9d..254d70f 100644 --- a/drivers/media/platform/exynos4-is/mipi-csis.c +++ b/drivers/media/platform/exynos4-is/mipi-csis.c @@ -746,7 +746,7 @@ static int s5pcsis_parse_dt(struct platform_device *pdev, node = v4l2_of_get_next_endpoint(node, NULL); if (!node) { dev_err(&pdev->dev, "No port node at %s\n", - node->full_name); + pdev->dev.of_node->full_name); return -EINVAL; } /* Get port node and validate MIPI-CSI channel id. */ -- cgit v0.10.2 From 8410725333088643f49371396e727cc1e41ccfb5 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 30 Apr 2013 02:16:19 -0300 Subject: [media] s3c-camif: Fix incorrect variable type 'rotation' was an 8 bit variable and hence could not have values greater than 255. Since we need higher values, change it to 16 bit type. Signed-off-by: Sachin Kamat Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/s3c-camif/camif-core.h b/drivers/media/platform/s3c-camif/camif-core.h index 261134b..35d2fcd 100644 --- a/drivers/media/platform/s3c-camif/camif-core.h +++ b/drivers/media/platform/s3c-camif/camif-core.h @@ -229,7 +229,7 @@ struct camif_vp { unsigned int state; u16 fmt_flags; u8 id; - u8 rotation; + u16 rotation; u8 hflip; u8 vflip; unsigned int offset; -- cgit v0.10.2 From c6f89116c14144c18295d2a06294788c86fe9e6d Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 30 Apr 2013 00:42:16 -0300 Subject: [media] s5c73m3: Fix off-by-one valid range checking for fie->index Current code uses fie->index as array subscript, thus the valid value range is 0 ... ARRAY_SIZE(s5c73m3_intervals) - 1. Signed-off-by: Axel Lin Acked-by: Andrzej Hajda Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/i2c/s5c73m3/s5c73m3-core.c b/drivers/media/i2c/s5c73m3/s5c73m3-core.c index cb52438..9eac531 100644 --- a/drivers/media/i2c/s5c73m3/s5c73m3-core.c +++ b/drivers/media/i2c/s5c73m3/s5c73m3-core.c @@ -956,7 +956,7 @@ static int s5c73m3_oif_enum_frame_interval(struct v4l2_subdev *sd, if (fie->pad != OIF_SOURCE_PAD) return -EINVAL; - if (fie->index > ARRAY_SIZE(s5c73m3_intervals)) + if (fie->index >= ARRAY_SIZE(s5c73m3_intervals)) return -EINVAL; mutex_lock(&state->lock); -- cgit v0.10.2 From 7accedd2fa059961629fd47212dd7096370c64fb Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 30 Apr 2013 10:18:23 -0300 Subject: [media] exynos4-is: Fix off-by-one valid range checking for is->config_index Current code uses is->config_index as array subscript, thus the valid value range is 0 ... ARRAY_SIZE(cmd) - 1. Signed-off-by: Axel Lin Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/exynos4-is/fimc-is-regs.c b/drivers/media/platform/exynos4-is/fimc-is-regs.c index b0ff67b..d05eaa2 100644 --- a/drivers/media/platform/exynos4-is/fimc-is-regs.c +++ b/drivers/media/platform/exynos4-is/fimc-is-regs.c @@ -174,7 +174,7 @@ int fimc_is_hw_change_mode(struct fimc_is *is) HIC_CAPTURE_STILL, HIC_CAPTURE_VIDEO, }; - if (WARN_ON(is->config_index > ARRAY_SIZE(cmd))) + if (WARN_ON(is->config_index >= ARRAY_SIZE(cmd))) return -EINVAL; mcuctl_write(cmd[is->config_index], is, MCUCTL_REG_ISSR(0)); -- cgit v0.10.2 From c79b069d72f54ff0589e7615160420553aa4f04e Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Thu, 9 May 2013 08:43:34 -0300 Subject: [media] exynos4-is: Correct fimc-lite compatible property description Ensure the compatible property for FIMC-LITE IP blocks is properly documented, a cut&paste error fix. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt b/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt index 3f62adf..de9f6b7 100644 --- a/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt +++ b/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt @@ -2,7 +2,7 @@ Exynos4x12/Exynos5 SoC series camera host interface (FIMC-LITE) Required properties: -- compatible : should be "samsung,exynos4212-fimc" for Exynos4212 and +- compatible : should be "samsung,exynos4212-fimc-lite" for Exynos4212 and Exynos4412 SoCs; - reg : physical base address and size of the device memory mapped registers; -- cgit v0.10.2 From 449875756055e2fff6074b4e69b35b9583f9f84d Mon Sep 17 00:00:00 2001 From: "Lad, Prabhakar" Date: Mon, 13 May 2013 06:39:07 -0300 Subject: [media] drivers/staging: davinci: vpfe: fix dependency for building the driver from commit 3778d05036cc7ddd983ae2451da579af00acdac2 [media: davinci: kconfig: fix incorrect selects] VIDEO_VPFE_CAPTURE was removed but there was a negative dependancy for building the DM365 VPFE MC based capture driver (VIDEO_DM365_VPFE), This patch fixes this dependency by replacing the VIDEO_VPFE_CAPTURE with VIDEO_DM365_ISIF, so as when older DM365 ISIF v4l driver is selected the newer media controller driver for DM365 isnt visible. Reported-by: Paul Bolle Signed-off-by: Lad, Prabhakar Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/staging/media/davinci_vpfe/Kconfig b/drivers/staging/media/davinci_vpfe/Kconfig index 2e4a28b..12f321d 100644 --- a/drivers/staging/media/davinci_vpfe/Kconfig +++ b/drivers/staging/media/davinci_vpfe/Kconfig @@ -1,6 +1,6 @@ config VIDEO_DM365_VPFE tristate "DM365 VPFE Media Controller Capture Driver" - depends on VIDEO_V4L2 && ARCH_DAVINCI_DM365 && !VIDEO_VPFE_CAPTURE + depends on VIDEO_V4L2 && ARCH_DAVINCI_DM365 && !VIDEO_DM365_ISIF select VIDEOBUF2_DMA_CONTIG help Support for DM365 VPFE based Media Controller Capture driver. -- cgit v0.10.2 From 6719a4974600fdaa4a3ac2ea2aed819a35d06605 Mon Sep 17 00:00:00 2001 From: Xiong Zhou Date: Fri, 17 May 2013 07:24:05 -0300 Subject: [media] staging/solo6x10: select the desired font Make sure FONT_8x16 can be found by find_font(). Signed-off-by: Xiong Zhou Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/staging/media/solo6x10/Kconfig b/drivers/staging/media/solo6x10/Kconfig index ec32776..0bc743b 100644 --- a/drivers/staging/media/solo6x10/Kconfig +++ b/drivers/staging/media/solo6x10/Kconfig @@ -4,6 +4,7 @@ config SOLO6X10 select VIDEOBUF2_DMA_SG select VIDEOBUF2_DMA_CONTIG select SND_PCM + select FONT_8x16 ---help--- This driver supports the Softlogic based MPEG-4 and h.264 codec cards. -- cgit v0.10.2 From 7b959fc582741227a1c4cba710d6aff8fb183128 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Wed, 22 May 2013 18:34:09 +0900 Subject: kprobes: Fix to free gone and unused optprobes Fix to free gone and unused optprobes. This bug will cause a kernel panic if the user reuses the killed and unused probe. Reported at: http://sourceware.org/ml/systemtap/2013-q2/msg00142.html In the normal path, an optprobe on an init function is unregistered when a module goes live. unregister_kprobe(kp) -> __unregister_kprobe_top ->__disable_kprobe ->disarm_kprobe(ap == op) ->__disarm_kprobe ->unoptimize_kprobe : the op is queued on unoptimizing_list and do nothing in __unregister_kprobe_bottom After a while (usually wait 5 jiffies), kprobe_optimizer runs to unoptimize and free optprobe. kprobe_optimizer ->do_unoptimize_kprobes ->arch_unoptimize_kprobes : moved to free_list ->do_free_cleaned_kprobes ->hlist_del: the op is removed ->free_aggr_kprobe ->arch_remove_optimized_kprobe ->arch_remove_kprobe ->kfree: the op is freed Here, if kprobes_module_callback is called and the delayed unoptimizing probe is picked BEFORE kprobe_optimizer runs, kprobes_module_callback ->kill_kprobe ->kill_optimized_kprobe : dequeued from unoptimizing_list <=!!! ->arch_remove_optimized_kprobe ->arch_remove_kprobe (but op is not freed, and on the kprobe hash table) This doesn't happen if the probe unregistration is done AFTER kprobes_module_callback is called (because at that time the op is gone), and kprobe-tracer does it. To fix this bug, this patch changes kprobes_module_callback to enqueue the op to freeing_list at kill_optimized_kprobe only if the op is unused. The unused probes on freeing_list will be freed in do_free_cleaned_kprobes. Note that this calls arch_remove_*kprobe twice on the same probe. Thus those functions have to check the double free. Fortunately, most of arch codes already checked that except for mips. This will be fixed in the next patch. Signed-off-by: Masami Hiramatsu Cc: Timo Juhani Lindfors Cc: Ananth N Mavinakayanahalli Cc: Anil S Keshavamurthy Cc: Frank Ch. Eigler Cc: systemtap@sourceware.org Cc: yrl.pp-manager.tt@hitachi.com Cc: David S. Miller Cc: "David S. Miller" Link: http://lkml.kernel.org/r/20130522093409.9084.63554.stgit@mhiramat-M0-7522 [ Minor edits. ] Signed-off-by: Ingo Molnar diff --git a/kernel/kprobes.c b/kernel/kprobes.c index 3fed7f0..bddf3b2 100644 --- a/kernel/kprobes.c +++ b/kernel/kprobes.c @@ -467,6 +467,7 @@ static struct kprobe *__kprobes get_optimized_kprobe(unsigned long addr) /* Optimization staging list, protected by kprobe_mutex */ static LIST_HEAD(optimizing_list); static LIST_HEAD(unoptimizing_list); +static LIST_HEAD(freeing_list); static void kprobe_optimizer(struct work_struct *work); static DECLARE_DELAYED_WORK(optimizing_work, kprobe_optimizer); @@ -504,7 +505,7 @@ static __kprobes void do_optimize_kprobes(void) * Unoptimize (replace a jump with a breakpoint and remove the breakpoint * if need) kprobes listed on unoptimizing_list. */ -static __kprobes void do_unoptimize_kprobes(struct list_head *free_list) +static __kprobes void do_unoptimize_kprobes(void) { struct optimized_kprobe *op, *tmp; @@ -515,9 +516,9 @@ static __kprobes void do_unoptimize_kprobes(struct list_head *free_list) /* Ditto to do_optimize_kprobes */ get_online_cpus(); mutex_lock(&text_mutex); - arch_unoptimize_kprobes(&unoptimizing_list, free_list); + arch_unoptimize_kprobes(&unoptimizing_list, &freeing_list); /* Loop free_list for disarming */ - list_for_each_entry_safe(op, tmp, free_list, list) { + list_for_each_entry_safe(op, tmp, &freeing_list, list) { /* Disarm probes if marked disabled */ if (kprobe_disabled(&op->kp)) arch_disarm_kprobe(&op->kp); @@ -536,11 +537,11 @@ static __kprobes void do_unoptimize_kprobes(struct list_head *free_list) } /* Reclaim all kprobes on the free_list */ -static __kprobes void do_free_cleaned_kprobes(struct list_head *free_list) +static __kprobes void do_free_cleaned_kprobes(void) { struct optimized_kprobe *op, *tmp; - list_for_each_entry_safe(op, tmp, free_list, list) { + list_for_each_entry_safe(op, tmp, &freeing_list, list) { BUG_ON(!kprobe_unused(&op->kp)); list_del_init(&op->list); free_aggr_kprobe(&op->kp); @@ -556,8 +557,6 @@ static __kprobes void kick_kprobe_optimizer(void) /* Kprobe jump optimizer */ static __kprobes void kprobe_optimizer(struct work_struct *work) { - LIST_HEAD(free_list); - mutex_lock(&kprobe_mutex); /* Lock modules while optimizing kprobes */ mutex_lock(&module_mutex); @@ -566,7 +565,7 @@ static __kprobes void kprobe_optimizer(struct work_struct *work) * Step 1: Unoptimize kprobes and collect cleaned (unused and disarmed) * kprobes before waiting for quiesence period. */ - do_unoptimize_kprobes(&free_list); + do_unoptimize_kprobes(); /* * Step 2: Wait for quiesence period to ensure all running interrupts @@ -581,7 +580,7 @@ static __kprobes void kprobe_optimizer(struct work_struct *work) do_optimize_kprobes(); /* Step 4: Free cleaned kprobes after quiesence period */ - do_free_cleaned_kprobes(&free_list); + do_free_cleaned_kprobes(); mutex_unlock(&module_mutex); mutex_unlock(&kprobe_mutex); @@ -723,8 +722,19 @@ static void __kprobes kill_optimized_kprobe(struct kprobe *p) if (!list_empty(&op->list)) /* Dequeue from the (un)optimization queue */ list_del_init(&op->list); - op->kp.flags &= ~KPROBE_FLAG_OPTIMIZED; + + if (kprobe_unused(p)) { + /* Enqueue if it is unused */ + list_add(&op->list, &freeing_list); + /* + * Remove unused probes from the hash list. After waiting + * for synchronization, this probe is reclaimed. + * (reclaiming is done by do_free_cleaned_kprobes().) + */ + hlist_del_rcu(&op->kp.hlist); + } + /* Don't touch the code, because it is already freed. */ arch_remove_optimized_kprobe(op); } -- cgit v0.10.2 From 26cb63ad11e04047a64309362674bcbbd6a6f246 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 28 May 2013 10:55:48 +0200 Subject: perf: Fix perf mmap bugs Vince reported a problem found by his perf specific trinity fuzzer. Al noticed 2 problems with perf's mmap(): - it has issues against fork() since we use vma->vm_mm for accounting. - it has an rb refcount leak on double mmap(). We fix the issues against fork() by using VM_DONTCOPY; I don't think there's code out there that uses this; we didn't hear about weird accounting problems/crashes. If we do need this to work, the previously proposed VM_PINNED could make this work. Aside from the rb reference leak spotted by Al, Vince's example prog was indeed doing a double mmap() through the use of perf_event_set_output(). This exposes another problem, since we now have 2 events with one buffer, the accounting gets screwy because we account per event. Fix this by making the buffer responsible for its own accounting. Reported-by: Vince Weaver Signed-off-by: Peter Zijlstra Cc: Al Viro Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Link: http://lkml.kernel.org/r/20130528085548.GA12193@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index f463a46..c5b6dbf 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -389,8 +389,7 @@ struct perf_event { /* mmap bits */ struct mutex mmap_mutex; atomic_t mmap_count; - int mmap_locked; - struct user_struct *mmap_user; + struct ring_buffer *rb; struct list_head rb_entry; diff --git a/kernel/events/core.c b/kernel/events/core.c index 9dc297f..ae752cd 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -2917,7 +2917,7 @@ static void free_event_rcu(struct rcu_head *head) kfree(event); } -static void ring_buffer_put(struct ring_buffer *rb); +static bool ring_buffer_put(struct ring_buffer *rb); static void free_event(struct perf_event *event) { @@ -3582,13 +3582,13 @@ static struct ring_buffer *ring_buffer_get(struct perf_event *event) return rb; } -static void ring_buffer_put(struct ring_buffer *rb) +static bool ring_buffer_put(struct ring_buffer *rb) { struct perf_event *event, *n; unsigned long flags; if (!atomic_dec_and_test(&rb->refcount)) - return; + return false; spin_lock_irqsave(&rb->event_lock, flags); list_for_each_entry_safe(event, n, &rb->event_list, rb_entry) { @@ -3598,6 +3598,7 @@ static void ring_buffer_put(struct ring_buffer *rb) spin_unlock_irqrestore(&rb->event_lock, flags); call_rcu(&rb->rcu_head, rb_free_rcu); + return true; } static void perf_mmap_open(struct vm_area_struct *vma) @@ -3612,18 +3613,20 @@ static void perf_mmap_close(struct vm_area_struct *vma) struct perf_event *event = vma->vm_file->private_data; if (atomic_dec_and_mutex_lock(&event->mmap_count, &event->mmap_mutex)) { - unsigned long size = perf_data_size(event->rb); - struct user_struct *user = event->mmap_user; struct ring_buffer *rb = event->rb; + struct user_struct *mmap_user = rb->mmap_user; + int mmap_locked = rb->mmap_locked; + unsigned long size = perf_data_size(rb); - atomic_long_sub((size >> PAGE_SHIFT) + 1, &user->locked_vm); - vma->vm_mm->pinned_vm -= event->mmap_locked; rcu_assign_pointer(event->rb, NULL); ring_buffer_detach(event, rb); mutex_unlock(&event->mmap_mutex); - ring_buffer_put(rb); - free_uid(user); + if (ring_buffer_put(rb)) { + atomic_long_sub((size >> PAGE_SHIFT) + 1, &mmap_user->locked_vm); + vma->vm_mm->pinned_vm -= mmap_locked; + free_uid(mmap_user); + } } } @@ -3676,9 +3679,7 @@ static int perf_mmap(struct file *file, struct vm_area_struct *vma) WARN_ON_ONCE(event->ctx->parent_ctx); mutex_lock(&event->mmap_mutex); if (event->rb) { - if (event->rb->nr_pages == nr_pages) - atomic_inc(&event->rb->refcount); - else + if (event->rb->nr_pages != nr_pages) ret = -EINVAL; goto unlock; } @@ -3720,12 +3721,14 @@ static int perf_mmap(struct file *file, struct vm_area_struct *vma) ret = -ENOMEM; goto unlock; } - rcu_assign_pointer(event->rb, rb); + + rb->mmap_locked = extra; + rb->mmap_user = get_current_user(); atomic_long_add(user_extra, &user->locked_vm); - event->mmap_locked = extra; - event->mmap_user = get_current_user(); - vma->vm_mm->pinned_vm += event->mmap_locked; + vma->vm_mm->pinned_vm += extra; + + rcu_assign_pointer(event->rb, rb); perf_event_update_userpage(event); @@ -3734,7 +3737,7 @@ unlock: atomic_inc(&event->mmap_count); mutex_unlock(&event->mmap_mutex); - vma->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP; + vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND | VM_DONTDUMP; vma->vm_ops = &perf_mmap_vmops; return ret; diff --git a/kernel/events/internal.h b/kernel/events/internal.h index eb675c4..5bc6c8e 100644 --- a/kernel/events/internal.h +++ b/kernel/events/internal.h @@ -31,6 +31,9 @@ struct ring_buffer { spinlock_t event_lock; struct list_head event_list; + int mmap_locked; + struct user_struct *mmap_user; + struct perf_event_mmap_page *user_page; void *data_pages[0]; }; -- cgit v0.10.2 From 45eacc692771bd2b1ea3d384e6345cab3da10861 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Wed, 15 May 2013 22:16:32 +0200 Subject: vtime: Use consistent clocks among nohz accounting While computing the cputime delta of dynticks CPUs, we are mixing up clocks of differents natures: * local_clock() which takes care of unstable clock sources and fix these if needed. * sched_clock() which is the weaker version of local_clock(). It doesn't compute any fixup in case of unstable source. If the clock source is stable, those two clocks are the same and we can safely compute the difference against two random points. Otherwise it results in random deltas as sched_clock() can randomly drift away, back or forward, from local_clock(). As a consequence, some strange behaviour with unstable tsc has been observed such as non progressing constant zero cputime. (The 'top' command showing no load). Fix this by only using local_clock(), or its irq safe/remote equivalent, in vtime code. Reported-by: Mike Galbraith Suggested-by: Mike Galbraith Cc: Steven Rostedt Cc: Paul E. McKenney Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Peter Zijlstra Cc: Borislav Petkov Cc: Li Zhong Cc: Mike Galbraith Signed-off-by: Frederic Weisbecker Signed-off-by: Ingo Molnar diff --git a/include/linux/vtime.h b/include/linux/vtime.h index 71a5782..b1dd2db 100644 --- a/include/linux/vtime.h +++ b/include/linux/vtime.h @@ -34,7 +34,7 @@ static inline void vtime_user_exit(struct task_struct *tsk) } extern void vtime_guest_enter(struct task_struct *tsk); extern void vtime_guest_exit(struct task_struct *tsk); -extern void vtime_init_idle(struct task_struct *tsk); +extern void vtime_init_idle(struct task_struct *tsk, int cpu); #else static inline void vtime_account_irq_exit(struct task_struct *tsk) { @@ -45,7 +45,7 @@ static inline void vtime_user_enter(struct task_struct *tsk) { } static inline void vtime_user_exit(struct task_struct *tsk) { } static inline void vtime_guest_enter(struct task_struct *tsk) { } static inline void vtime_guest_exit(struct task_struct *tsk) { } -static inline void vtime_init_idle(struct task_struct *tsk) { } +static inline void vtime_init_idle(struct task_struct *tsk, int cpu) { } #endif #ifdef CONFIG_IRQ_TIME_ACCOUNTING diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 58453b8..e1a27f9 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -4745,7 +4745,7 @@ void __cpuinit init_idle(struct task_struct *idle, int cpu) */ idle->sched_class = &idle_sched_class; ftrace_graph_init_idle_task(idle, cpu); - vtime_init_idle(idle); + vtime_init_idle(idle, cpu); #if defined(CONFIG_SMP) sprintf(idle->comm, "%s/%d", INIT_TASK_COMM, cpu); #endif diff --git a/kernel/sched/cputime.c b/kernel/sched/cputime.c index cc2dc3e..b5ccba2 100644 --- a/kernel/sched/cputime.c +++ b/kernel/sched/cputime.c @@ -747,17 +747,17 @@ void arch_vtime_task_switch(struct task_struct *prev) write_seqlock(¤t->vtime_seqlock); current->vtime_snap_whence = VTIME_SYS; - current->vtime_snap = sched_clock(); + current->vtime_snap = sched_clock_cpu(smp_processor_id()); write_sequnlock(¤t->vtime_seqlock); } -void vtime_init_idle(struct task_struct *t) +void vtime_init_idle(struct task_struct *t, int cpu) { unsigned long flags; write_seqlock_irqsave(&t->vtime_seqlock, flags); t->vtime_snap_whence = VTIME_SYS; - t->vtime_snap = sched_clock(); + t->vtime_snap = sched_clock_cpu(cpu); write_sequnlock_irqrestore(&t->vtime_seqlock, flags); } -- cgit v0.10.2 From 521921bad1192fb1b8f9b6a5aa673635848b8b5f Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Thu, 16 May 2013 01:21:38 +0200 Subject: kvm: Move guest entry/exit APIs to context_tracking The kvm_host.h header file doesn't handle well inclusion when archs don't support KVM. This results in build crashes for such archs when they want to implement context tracking because this subsystem includes kvm_host.h in order to implement the guest_enter/exit APIs but it doesn't handle KVM off case. To fix this, move the guest_enter()/guest_exit() declarations and generic implementation to the context tracking headers. These generic APIs actually belong to this subsystem, besides other domains boundary tracking like user_enter() et al. KVM now properly becomes a user of this library, not the other buggy way around. Reported-by: Kevin Hilman Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman Signed-off-by: Frederic Weisbecker Cc: Steven Rostedt Cc: Paul E. McKenney Cc: Thomas Gleixner Cc: Peter Zijlstra Cc: Kevin Hilman Cc: Marcelo Tosatti Cc: Gleb Natapov Signed-off-by: Ingo Molnar diff --git a/include/linux/context_tracking.h b/include/linux/context_tracking.h index 365f4a6..fc09d7b 100644 --- a/include/linux/context_tracking.h +++ b/include/linux/context_tracking.h @@ -3,6 +3,7 @@ #include #include +#include #include struct context_tracking { @@ -19,6 +20,26 @@ struct context_tracking { } state; }; +static inline void __guest_enter(void) +{ + /* + * This is running in ioctl context so we can avoid + * the call to vtime_account() with its unnecessary idle check. + */ + vtime_account_system(current); + current->flags |= PF_VCPU; +} + +static inline void __guest_exit(void) +{ + /* + * This is running in ioctl context so we can avoid + * the call to vtime_account() with its unnecessary idle check. + */ + vtime_account_system(current); + current->flags &= ~PF_VCPU; +} + #ifdef CONFIG_CONTEXT_TRACKING DECLARE_PER_CPU(struct context_tracking, context_tracking); @@ -35,6 +56,9 @@ static inline bool context_tracking_active(void) extern void user_enter(void); extern void user_exit(void); +extern void guest_enter(void); +extern void guest_exit(void); + static inline enum ctx_state exception_enter(void) { enum ctx_state prev_ctx; @@ -57,6 +81,17 @@ extern void context_tracking_task_switch(struct task_struct *prev, static inline bool context_tracking_in_user(void) { return false; } static inline void user_enter(void) { } static inline void user_exit(void) { } + +static inline void guest_enter(void) +{ + __guest_enter(); +} + +static inline void guest_exit(void) +{ + __guest_exit(); +} + static inline enum ctx_state exception_enter(void) { return 0; } static inline void exception_exit(enum ctx_state prev_ctx) { } static inline void context_tracking_task_switch(struct task_struct *prev, diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index f0eea07..8db53cf 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -760,42 +761,6 @@ static inline int kvm_iommu_unmap_guest(struct kvm *kvm) } #endif -static inline void __guest_enter(void) -{ - /* - * This is running in ioctl context so we can avoid - * the call to vtime_account() with its unnecessary idle check. - */ - vtime_account_system(current); - current->flags |= PF_VCPU; -} - -static inline void __guest_exit(void) -{ - /* - * This is running in ioctl context so we can avoid - * the call to vtime_account() with its unnecessary idle check. - */ - vtime_account_system(current); - current->flags &= ~PF_VCPU; -} - -#ifdef CONFIG_CONTEXT_TRACKING -extern void guest_enter(void); -extern void guest_exit(void); - -#else /* !CONFIG_CONTEXT_TRACKING */ -static inline void guest_enter(void) -{ - __guest_enter(); -} - -static inline void guest_exit(void) -{ - __guest_exit(); -} -#endif /* !CONFIG_CONTEXT_TRACKING */ - static inline void kvm_guest_enter(void) { unsigned long flags; diff --git a/kernel/context_tracking.c b/kernel/context_tracking.c index 65349f0..85bdde1 100644 --- a/kernel/context_tracking.c +++ b/kernel/context_tracking.c @@ -15,7 +15,6 @@ */ #include -#include #include #include #include -- cgit v0.10.2 From 1a7f829f094dd7951e7d46c571a18080e455a436 Mon Sep 17 00:00:00 2001 From: Li Zhong Date: Fri, 17 May 2013 16:44:04 +0800 Subject: nohz: Fix notifier return val that enforce timekeeping In tick_nohz_cpu_down_callback() if the cpu is the one handling timekeeping, we must return something that stops the CPU_DOWN_PREPARE notifiers and then start notify CPU_DOWN_FAILED on the already called notifier call backs. However traditional errno values are not handled by the notifier unless these are encapsulated using errno_to_notifier(). Hence the current -EINVAL is misinterpreted and converted to junk after notifier_to_errno(), leaving the notifier subsystem to random behaviour such as eventually allowing the cpu to go down. Fix this by using the standard NOTIFY_BAD instead. Signed-off-by: Li Zhong Reviewed-by: Srivatsa S. Bhat Acked-by: Steven Rostedt Cc: Paul E. McKenney Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Peter Zijlstra Cc: Borislav Petkov Signed-off-by: Frederic Weisbecker Signed-off-by: Ingo Molnar diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index f420813..0cf1c14 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -306,7 +306,7 @@ static int __cpuinit tick_nohz_cpu_down_callback(struct notifier_block *nfb, * we can't safely shutdown that CPU. */ if (have_nohz_full_mask && tick_do_timer_cpu == cpu) - return -EINVAL; + return NOTIFY_BAD; break; } return NOTIFY_OK; -- cgit v0.10.2 From b0bc225d0e5de887340d4d92a8c594ef0f60d412 Mon Sep 17 00:00:00 2001 From: Andrew Jones Date: Wed, 29 May 2013 14:48:15 +0200 Subject: sched/x86: Construct all sibling maps if smt Commit 316ad248307fb ("sched/x86: Rewrite set_cpu_sibling_map()") broke the construction of sibling maps, which also broke the booted_cores accounting. Before the rewrite, if smt was present, then each map was updated for each smt sibling. After the rewrite only cpu_sibling_mask gets updated, as the llc and core maps depend on 'has_mc = x86_max_cores > 1' instead. This leads to problems with topologies like the following (qemu -smp sockets=2,cores=1,threads=2) processor : 0 physical id : 0 siblings : 1 <= should be 2 core id : 0 cpu cores : 1 processor : 1 physical id : 0 siblings : 1 <= should be 2 core id : 0 cpu cores : 0 <= should be 1 processor : 2 physical id : 1 siblings : 1 <= should be 2 core id : 0 cpu cores : 1 processor : 3 physical id : 1 siblings : 1 <= should be 2 core id : 0 cpu cores : 0 <= should be 1 This patch restores the former construction by defining has_mc as (has_smt || x86_max_cores > 1). This should be fine as there were no (has_smt && !has_mc) conditions in the context. Aso rename has_mc to has_mp now that it's not just for cores. Signed-off-by: Andrew Jones Acked-by: Peter Zijlstra Cc: a.p.zijlstra@chello.nl Cc: fenghua.yu@intel.com Link: http://lkml.kernel.org/r/1369831695-11970-1-git-send-email-drjones@redhat.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 9c73b51..bfd348e 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -372,15 +372,15 @@ static bool __cpuinit match_mc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o) void __cpuinit set_cpu_sibling_map(int cpu) { - bool has_mc = boot_cpu_data.x86_max_cores > 1; bool has_smt = smp_num_siblings > 1; + bool has_mp = has_smt || boot_cpu_data.x86_max_cores > 1; struct cpuinfo_x86 *c = &cpu_data(cpu); struct cpuinfo_x86 *o; int i; cpumask_set_cpu(cpu, cpu_sibling_setup_mask); - if (!has_smt && !has_mc) { + if (!has_mp) { cpumask_set_cpu(cpu, cpu_sibling_mask(cpu)); cpumask_set_cpu(cpu, cpu_llc_shared_mask(cpu)); cpumask_set_cpu(cpu, cpu_core_mask(cpu)); @@ -394,7 +394,7 @@ void __cpuinit set_cpu_sibling_map(int cpu) if ((i == cpu) || (has_smt && match_smt(c, o))) link_mask(sibling, cpu, i); - if ((i == cpu) || (has_mc && match_llc(c, o))) + if ((i == cpu) || (has_mp && match_llc(c, o))) link_mask(llc_shared, cpu, i); } @@ -406,7 +406,7 @@ void __cpuinit set_cpu_sibling_map(int cpu) for_each_cpu(i, cpu_sibling_setup_mask) { o = &cpu_data(i); - if ((i == cpu) || (has_mc && match_mc(c, o))) { + if ((i == cpu) || (has_mp && match_mc(c, o))) { link_mask(core, cpu, i); /* -- cgit v0.10.2 From f5d00c1f9adb350c24c5301600f7bf2da99b66de Mon Sep 17 00:00:00 2001 From: Jiri Bohac Date: Tue, 28 May 2013 15:29:03 +0200 Subject: tick: Remove useless timekeeping duty attribution to broadcast source Since 7300711e ("clockevents: broadcast fixup possible waiters"), the timekeeping duty is assigned to the CPU that handles the tick broadcast clock device by the time it is set in one shot mode. This is an issue in full dynticks mode where the timekeeping duty must stay handled by the boot CPU for now. Otherwise it prevents secondary CPUs from offlining and this breaks suspend/shutdown/reboot/... As it appears there is no reason for this timekeeping duty to be moved to the broadcast CPU, besides nothing prevent it from being later re-assigned to another target, let's simply remove it. Signed-off-by: Jiri Bohac Reported-by: Steven Rostedt Acked-by: Thomas Gleixner Cc: Steven Rostedt Cc: Thomas Gleixner Cc: Paul E. McKenney Cc: Peter Zijlstra Cc: Borislav Petkov Signed-off-by: Frederic Weisbecker Signed-off-by: Ingo Molnar diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index 0c73942..b4c2455 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -698,10 +698,6 @@ void tick_broadcast_setup_oneshot(struct clock_event_device *bc) bc->event_handler = tick_handle_oneshot_broadcast; - /* Take the do_timer update */ - if (!tick_nohz_full_cpu(cpu)) - tick_do_timer_cpu = cpu; - /* * We must be careful here. There might be other CPUs * waiting for periodic broadcast. We need to set the -- cgit v0.10.2 From e9d98ddc0a4e4e11603c818bf234644031bff384 Mon Sep 17 00:00:00 2001 From: Arun Kumar K Date: Wed, 24 Apr 2013 09:41:53 -0300 Subject: [media] s5p-mfc: Update v6 encoder buffer alloc MFC v6 needs minimum number of output buffers to be queued for encoder depending on the stream type and profile. The patch modifies the driver so that encoding cannot be started with lesser number of OUTPUT buffers than required. This also fixes the crash happeninig during multi instance encoder-decoder simultaneous run due to memory allocation happening from interrupt context. Signed-off-by: Arun Kumar K Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c index 01f9ae0..3b2345e 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c @@ -397,7 +397,7 @@ static void s5p_mfc_handle_frame(struct s5p_mfc_ctx *ctx, leave_handle_frame: spin_unlock_irqrestore(&dev->irqlock, flags); if ((ctx->src_queue_cnt == 0 && ctx->state != MFCINST_FINISHING) - || ctx->dst_queue_cnt < ctx->dpb_count) + || ctx->dst_queue_cnt < ctx->pb_count) clear_work_bit(ctx); s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev); wake_up_ctx(ctx, reason, err); @@ -473,7 +473,7 @@ static void s5p_mfc_handle_seq_done(struct s5p_mfc_ctx *ctx, s5p_mfc_hw_call(dev->mfc_ops, dec_calc_dpb_size, ctx); - ctx->dpb_count = s5p_mfc_hw_call(dev->mfc_ops, get_dpb_count, + ctx->pb_count = s5p_mfc_hw_call(dev->mfc_ops, get_dpb_count, dev); ctx->mv_count = s5p_mfc_hw_call(dev->mfc_ops, get_mv_count, dev); diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h index 202d1d7..975d1b2 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h @@ -138,6 +138,7 @@ enum s5p_mfc_inst_state { MFCINST_INIT = 100, MFCINST_GOT_INST, MFCINST_HEAD_PARSED, + MFCINST_HEAD_PRODUCED, MFCINST_BUFS_SET, MFCINST_RUNNING, MFCINST_FINISHING, @@ -602,7 +603,7 @@ struct s5p_mfc_ctx { int after_packed_pb; int sei_fp_parse; - int dpb_count; + int pb_count; int total_dpb_count; int mv_count; /* Buffers */ diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c index 4af53bd..00b0703 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c @@ -210,11 +210,11 @@ static int s5p_mfc_ctx_ready(struct s5p_mfc_ctx *ctx) /* Context is to decode a frame */ if (ctx->src_queue_cnt >= 1 && ctx->state == MFCINST_RUNNING && - ctx->dst_queue_cnt >= ctx->dpb_count) + ctx->dst_queue_cnt >= ctx->pb_count) return 1; /* Context is to return last frame */ if (ctx->state == MFCINST_FINISHING && - ctx->dst_queue_cnt >= ctx->dpb_count) + ctx->dst_queue_cnt >= ctx->pb_count) return 1; /* Context is to set buffers */ if (ctx->src_queue_cnt >= 1 && @@ -224,7 +224,7 @@ static int s5p_mfc_ctx_ready(struct s5p_mfc_ctx *ctx) /* Resolution change */ if ((ctx->state == MFCINST_RES_CHANGE_INIT || ctx->state == MFCINST_RES_CHANGE_FLUSH) && - ctx->dst_queue_cnt >= ctx->dpb_count) + ctx->dst_queue_cnt >= ctx->pb_count) return 1; if (ctx->state == MFCINST_RES_CHANGE_END && ctx->src_queue_cnt >= 1) @@ -537,7 +537,7 @@ static int vidioc_reqbufs(struct file *file, void *priv, mfc_err("vb2_reqbufs on capture failed\n"); return ret; } - if (reqbufs->count < ctx->dpb_count) { + if (reqbufs->count < ctx->pb_count) { mfc_err("Not enough buffers allocated\n"); reqbufs->count = 0; s5p_mfc_clock_on(); @@ -751,7 +751,7 @@ static int s5p_mfc_dec_g_v_ctrl(struct v4l2_ctrl *ctrl) case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE: if (ctx->state >= MFCINST_HEAD_PARSED && ctx->state < MFCINST_ABORT) { - ctrl->val = ctx->dpb_count; + ctrl->val = ctx->pb_count; break; } else if (ctx->state != MFCINST_INIT) { v4l2_err(&dev->v4l2_dev, "Decoding not initialised\n"); @@ -763,7 +763,7 @@ static int s5p_mfc_dec_g_v_ctrl(struct v4l2_ctrl *ctrl) S5P_MFC_R2H_CMD_SEQ_DONE_RET, 0); if (ctx->state >= MFCINST_HEAD_PARSED && ctx->state < MFCINST_ABORT) { - ctrl->val = ctx->dpb_count; + ctrl->val = ctx->pb_count; } else { v4l2_err(&dev->v4l2_dev, "Decoding not initialised\n"); return -EINVAL; @@ -924,10 +924,10 @@ static int s5p_mfc_queue_setup(struct vb2_queue *vq, /* Output plane count is 2 - one for Y and one for CbCr */ *plane_count = 2; /* Setup buffer count */ - if (*buf_count < ctx->dpb_count) - *buf_count = ctx->dpb_count; - if (*buf_count > ctx->dpb_count + MFC_MAX_EXTRA_DPB) - *buf_count = ctx->dpb_count + MFC_MAX_EXTRA_DPB; + if (*buf_count < ctx->pb_count) + *buf_count = ctx->pb_count; + if (*buf_count > ctx->pb_count + MFC_MAX_EXTRA_DPB) + *buf_count = ctx->pb_count + MFC_MAX_EXTRA_DPB; if (*buf_count > MFC_MAX_BUFFERS) *buf_count = MFC_MAX_BUFFERS; } else { diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c index 4f6b553..5e019aa 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c @@ -592,7 +592,7 @@ static int s5p_mfc_ctx_ready(struct s5p_mfc_ctx *ctx) return 1; /* context is ready to encode a frame */ if ((ctx->state == MFCINST_RUNNING || - ctx->state == MFCINST_HEAD_PARSED) && + ctx->state == MFCINST_HEAD_PRODUCED) && ctx->src_queue_cnt >= 1 && ctx->dst_queue_cnt >= 1) return 1; /* context is ready to encode remaining frames */ @@ -649,6 +649,7 @@ static int enc_post_seq_start(struct s5p_mfc_ctx *ctx) struct s5p_mfc_enc_params *p = &ctx->enc_params; struct s5p_mfc_buf *dst_mb; unsigned long flags; + unsigned int enc_pb_count; if (p->seq_hdr_mode == V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE) { spin_lock_irqsave(&dev->irqlock, flags); @@ -661,18 +662,19 @@ static int enc_post_seq_start(struct s5p_mfc_ctx *ctx) vb2_buffer_done(dst_mb->b, VB2_BUF_STATE_DONE); spin_unlock_irqrestore(&dev->irqlock, flags); } - if (IS_MFCV6(dev)) { - ctx->state = MFCINST_HEAD_PARSED; /* for INIT_BUFFER cmd */ - } else { + + if (!IS_MFCV6(dev)) { ctx->state = MFCINST_RUNNING; if (s5p_mfc_ctx_ready(ctx)) set_work_bit_irqsave(ctx); s5p_mfc_hw_call(dev->mfc_ops, try_run, dev); - } - - if (IS_MFCV6(dev)) - ctx->dpb_count = s5p_mfc_hw_call(dev->mfc_ops, + } else { + enc_pb_count = s5p_mfc_hw_call(dev->mfc_ops, get_enc_dpb_count, dev); + if (ctx->pb_count < enc_pb_count) + ctx->pb_count = enc_pb_count; + ctx->state = MFCINST_HEAD_PRODUCED; + } return 0; } @@ -1055,15 +1057,13 @@ static int vidioc_reqbufs(struct file *file, void *priv, } ctx->capture_state = QUEUE_BUFS_REQUESTED; - if (!IS_MFCV6(dev)) { - ret = s5p_mfc_hw_call(ctx->dev->mfc_ops, - alloc_codec_buffers, ctx); - if (ret) { - mfc_err("Failed to allocate encoding buffers\n"); - reqbufs->count = 0; - ret = vb2_reqbufs(&ctx->vq_dst, reqbufs); - return -ENOMEM; - } + ret = s5p_mfc_hw_call(ctx->dev->mfc_ops, + alloc_codec_buffers, ctx); + if (ret) { + mfc_err("Failed to allocate encoding buffers\n"); + reqbufs->count = 0; + ret = vb2_reqbufs(&ctx->vq_dst, reqbufs); + return -ENOMEM; } } else if (reqbufs->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { if (ctx->output_state != QUEUE_FREE) { @@ -1071,6 +1071,19 @@ static int vidioc_reqbufs(struct file *file, void *priv, ctx->output_state); return -EINVAL; } + + if (IS_MFCV6(dev)) { + /* Check for min encoder buffers */ + if (ctx->pb_count && + (reqbufs->count < ctx->pb_count)) { + reqbufs->count = ctx->pb_count; + mfc_debug(2, "Minimum %d output buffers needed\n", + ctx->pb_count); + } else { + ctx->pb_count = reqbufs->count; + } + } + ret = vb2_reqbufs(&ctx->vq_src, reqbufs); if (ret != 0) { mfc_err("error in vb2_reqbufs() for E(S)\n"); @@ -1760,11 +1773,28 @@ static int s5p_mfc_start_streaming(struct vb2_queue *q, unsigned int count) struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv); struct s5p_mfc_dev *dev = ctx->dev; + if (IS_MFCV6(dev) && (q->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)) { + + if ((ctx->state == MFCINST_GOT_INST) && + (dev->curr_ctx == ctx->num) && dev->hw_lock) { + s5p_mfc_wait_for_done_ctx(ctx, + S5P_MFC_R2H_CMD_SEQ_DONE_RET, + 0); + } + + if (ctx->src_bufs_cnt < ctx->pb_count) { + mfc_err("Need minimum %d OUTPUT buffers\n", + ctx->pb_count); + return -EINVAL; + } + } + v4l2_ctrl_handler_setup(&ctx->ctrl_handler); /* If context is ready then dev = work->data;schedule it to run */ if (s5p_mfc_ctx_ready(ctx)) set_work_bit_irqsave(ctx); s5p_mfc_hw_call(dev->mfc_ops, try_run, dev); + return 0; } diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c index db57f25..383ae77 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c @@ -167,7 +167,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx) S5P_FIMV_SCRATCH_BUFFER_ALIGN_V6); ctx->bank1.size = ctx->scratch_buf_size + ctx->tmv_buffer_size + - (ctx->dpb_count * (ctx->luma_dpb_size + + (ctx->pb_count * (ctx->luma_dpb_size + ctx->chroma_dpb_size + ctx->me_buffer_size)); ctx->bank2.size = 0; break; @@ -181,7 +181,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx) S5P_FIMV_SCRATCH_BUFFER_ALIGN_V6); ctx->bank1.size = ctx->scratch_buf_size + ctx->tmv_buffer_size + - (ctx->dpb_count * (ctx->luma_dpb_size + + (ctx->pb_count * (ctx->luma_dpb_size + ctx->chroma_dpb_size + ctx->me_buffer_size)); ctx->bank2.size = 0; break; @@ -198,7 +198,6 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx) } BUG_ON(ctx->bank1.dma & ((1 << MFC_BANK1_ALIGN_ORDER) - 1)); } - return 0; } @@ -497,7 +496,7 @@ static int s5p_mfc_set_enc_ref_buffer_v6(struct s5p_mfc_ctx *ctx) mfc_debug(2, "Buf1: %p (%d)\n", (void *)buf_addr1, buf_size1); - for (i = 0; i < ctx->dpb_count; i++) { + for (i = 0; i < ctx->pb_count; i++) { WRITEL(buf_addr1, S5P_FIMV_E_LUMA_DPB_V6 + (4 * i)); buf_addr1 += ctx->luma_dpb_size; WRITEL(buf_addr1, S5P_FIMV_E_CHROMA_DPB_V6 + (4 * i)); @@ -520,7 +519,7 @@ static int s5p_mfc_set_enc_ref_buffer_v6(struct s5p_mfc_ctx *ctx) buf_size1 -= ctx->tmv_buffer_size; mfc_debug(2, "Buf1: %u, buf_size1: %d (ref frames %d)\n", - buf_addr1, buf_size1, ctx->dpb_count); + buf_addr1, buf_size1, ctx->pb_count); if (buf_size1 < 0) { mfc_debug(2, "Not enough memory has been allocated.\n"); return -ENOMEM; @@ -1522,22 +1521,6 @@ static inline int s5p_mfc_run_init_enc_buffers(struct s5p_mfc_ctx *ctx) struct s5p_mfc_dev *dev = ctx->dev; int ret; - ret = s5p_mfc_alloc_codec_buffers_v6(ctx); - if (ret) { - mfc_err("Failed to allocate encoding buffers.\n"); - return -ENOMEM; - } - - /* Header was generated now starting processing - * First set the reference frame buffers - */ - if (ctx->capture_state != QUEUE_BUFS_REQUESTED) { - mfc_err("It seems that destionation buffers were not\n" - "requested.MFC requires that header should be generated\n" - "before allocating codec buffer.\n"); - return -EAGAIN; - } - dev->curr_ctx = ctx->num; s5p_mfc_clean_ctx_int_flags(ctx); ret = s5p_mfc_set_enc_ref_buffer_v6(ctx); @@ -1582,7 +1565,7 @@ static void s5p_mfc_try_run_v6(struct s5p_mfc_dev *dev) mfc_debug(1, "Seting new context to %p\n", ctx); /* Got context to run in ctx */ mfc_debug(1, "ctx->dst_queue_cnt=%d ctx->dpb_count=%d ctx->src_queue_cnt=%d\n", - ctx->dst_queue_cnt, ctx->dpb_count, ctx->src_queue_cnt); + ctx->dst_queue_cnt, ctx->pb_count, ctx->src_queue_cnt); mfc_debug(1, "ctx->state=%d\n", ctx->state); /* Last frame has already been sent to MFC * Now obtaining frames from MFC buffer */ @@ -1647,7 +1630,7 @@ static void s5p_mfc_try_run_v6(struct s5p_mfc_dev *dev) case MFCINST_GOT_INST: s5p_mfc_run_init_enc(ctx); break; - case MFCINST_HEAD_PARSED: /* Only for MFC6.x */ + case MFCINST_HEAD_PRODUCED: ret = s5p_mfc_run_init_enc_buffers(ctx); break; default: -- cgit v0.10.2 From 412cb87d28a1f299ee82fe1c8bfe6cbeec9a4655 Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Mon, 20 May 2013 23:47:29 -0300 Subject: [media] media: vb2: return for polling if a buffer is available The vb2_poll() does not need to wait next vb_buffer_done() if there is already a buffer in done_list of queue, but current vb2_poll() always waits. So done_list is checked before calling poll_wait(). Signed-off-by: Seung-Woo Kim Acked-by: Marek Szyprowski Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c index 7d833ee..e3bdc3b 100644 --- a/drivers/media/v4l2-core/videobuf2-core.c +++ b/drivers/media/v4l2-core/videobuf2-core.c @@ -2014,7 +2014,8 @@ unsigned int vb2_poll(struct vb2_queue *q, struct file *file, poll_table *wait) if (list_empty(&q->queued_list)) return res | POLLERR; - poll_wait(file, &q->done_wq, wait); + if (list_empty(&q->done_list)) + poll_wait(file, &q->done_wq, wait); /* * Take first buffer available for dequeuing. -- cgit v0.10.2 From 57183467c09555d985ae62b79c754e64279381df Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Mon, 20 May 2013 23:47:30 -0300 Subject: [media] media: v4l2-mem2mem: return for polling if a buffer is available The v4l2_m2m_poll() does not need to wait if there is already a buffer in done_list of source and destination queues, but current v4l2_m2m_poll() always waits. So done_list of each queue is checked before calling poll_wait(). Signed-off-by: Seung-Woo Kim Acked-by: Marek Szyprowski Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c index 66f599f..9ac39b5 100644 --- a/drivers/media/v4l2-core/v4l2-mem2mem.c +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c @@ -486,8 +486,10 @@ unsigned int v4l2_m2m_poll(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, if (m2m_ctx->m2m_dev->m2m_ops->unlock) m2m_ctx->m2m_dev->m2m_ops->unlock(m2m_ctx->priv); - poll_wait(file, &src_q->done_wq, wait); - poll_wait(file, &dst_q->done_wq, wait); + if (list_empty(&src_q->done_list)) + poll_wait(file, &src_q->done_wq, wait); + if (list_empty(&dst_q->done_list)) + poll_wait(file, &dst_q->done_wq, wait); if (m2m_ctx->m2m_dev->m2m_ops->lock) m2m_ctx->m2m_dev->m2m_ops->lock(m2m_ctx->priv); -- cgit v0.10.2 From 8b94ca61d7065fa7fa7bdb08ce31a9385be5205b Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 21 May 2013 04:16:28 -0300 Subject: [media] v4l2-mem2mem: add v4l2_m2m_create_bufs helper Signed-off-by: Philipp Zabel Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c index 9ac39b5..a756170 100644 --- a/drivers/media/v4l2-core/v4l2-mem2mem.c +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c @@ -372,6 +372,20 @@ int v4l2_m2m_dqbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, EXPORT_SYMBOL_GPL(v4l2_m2m_dqbuf); /** + * v4l2_m2m_create_bufs() - create a source or destination buffer, depending + * on the type + */ +int v4l2_m2m_create_bufs(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, + struct v4l2_create_buffers *create) +{ + struct vb2_queue *vq; + + vq = v4l2_m2m_get_vq(m2m_ctx, create->format.type); + return vb2_create_bufs(vq, create); +} +EXPORT_SYMBOL_GPL(v4l2_m2m_create_bufs); + +/** * v4l2_m2m_expbuf() - export a source or destination buffer, depending on * the type */ diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h index d3eef01..0f4555b 100644 --- a/include/media/v4l2-mem2mem.h +++ b/include/media/v4l2-mem2mem.h @@ -110,6 +110,8 @@ int v4l2_m2m_qbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, struct v4l2_buffer *buf); int v4l2_m2m_dqbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, struct v4l2_buffer *buf); +int v4l2_m2m_create_bufs(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, + struct v4l2_create_buffers *create); int v4l2_m2m_expbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, struct v4l2_exportbuffer *eb); -- cgit v0.10.2 From 8fdf94a254ab2f90ae79b82e56b1f8e9d7582026 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 21 May 2013 04:16:29 -0300 Subject: [media] coda: v4l2-compliance fix: add VIDIOC_CREATE_BUFS support Signed-off-by: Philipp Zabel Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/coda.c b/drivers/media/platform/coda.c index 5612329..f82e1c6 100644 --- a/drivers/media/platform/coda.c +++ b/drivers/media/platform/coda.c @@ -571,6 +571,14 @@ static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *buf) return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf); } +static int vidioc_create_bufs(struct file *file, void *priv, + struct v4l2_create_buffers *create) +{ + struct coda_ctx *ctx = fh_to_ctx(priv); + + return v4l2_m2m_create_bufs(file, ctx->m2m_ctx, create); +} + static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type type) { @@ -605,6 +613,7 @@ static const struct v4l2_ioctl_ops coda_ioctl_ops = { .vidioc_qbuf = vidioc_qbuf, .vidioc_dqbuf = vidioc_dqbuf, + .vidioc_create_bufs = vidioc_create_bufs, .vidioc_streamon = vidioc_streamon, .vidioc_streamoff = vidioc_streamoff, -- cgit v0.10.2 From b730627ad65f023dd9ce83047a3076330ebaefe5 Mon Sep 17 00:00:00 2001 From: John Sheu Date: Thu, 23 May 2013 20:41:48 -0300 Subject: [media] v4l2: mem2mem: save irq flags correctly Save flags correctly when taking spinlocks in v4l2_m2m_try_schedule. Signed-off-by: John Sheu Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c index a756170..e96497f 100644 --- a/drivers/media/v4l2-core/v4l2-mem2mem.c +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c @@ -205,7 +205,7 @@ static void v4l2_m2m_try_run(struct v4l2_m2m_dev *m2m_dev) static void v4l2_m2m_try_schedule(struct v4l2_m2m_ctx *m2m_ctx) { struct v4l2_m2m_dev *m2m_dev; - unsigned long flags_job, flags; + unsigned long flags_job, flags_out, flags_cap; m2m_dev = m2m_ctx->m2m_dev; dprintk("Trying to schedule a job for m2m_ctx: %p\n", m2m_ctx); @@ -223,23 +223,26 @@ static void v4l2_m2m_try_schedule(struct v4l2_m2m_ctx *m2m_ctx) return; } - spin_lock_irqsave(&m2m_ctx->out_q_ctx.rdy_spinlock, flags); + spin_lock_irqsave(&m2m_ctx->out_q_ctx.rdy_spinlock, flags_out); if (list_empty(&m2m_ctx->out_q_ctx.rdy_queue)) { - spin_unlock_irqrestore(&m2m_ctx->out_q_ctx.rdy_spinlock, flags); + spin_unlock_irqrestore(&m2m_ctx->out_q_ctx.rdy_spinlock, + flags_out); spin_unlock_irqrestore(&m2m_dev->job_spinlock, flags_job); dprintk("No input buffers available\n"); return; } - spin_lock_irqsave(&m2m_ctx->cap_q_ctx.rdy_spinlock, flags); + spin_lock_irqsave(&m2m_ctx->cap_q_ctx.rdy_spinlock, flags_cap); if (list_empty(&m2m_ctx->cap_q_ctx.rdy_queue)) { - spin_unlock_irqrestore(&m2m_ctx->cap_q_ctx.rdy_spinlock, flags); - spin_unlock_irqrestore(&m2m_ctx->out_q_ctx.rdy_spinlock, flags); + spin_unlock_irqrestore(&m2m_ctx->cap_q_ctx.rdy_spinlock, + flags_cap); + spin_unlock_irqrestore(&m2m_ctx->out_q_ctx.rdy_spinlock, + flags_out); spin_unlock_irqrestore(&m2m_dev->job_spinlock, flags_job); dprintk("No output buffers available\n"); return; } - spin_unlock_irqrestore(&m2m_ctx->cap_q_ctx.rdy_spinlock, flags); - spin_unlock_irqrestore(&m2m_ctx->out_q_ctx.rdy_spinlock, flags); + spin_unlock_irqrestore(&m2m_ctx->cap_q_ctx.rdy_spinlock, flags_cap); + spin_unlock_irqrestore(&m2m_ctx->out_q_ctx.rdy_spinlock, flags_out); if (m2m_dev->m2m_ops->job_ready && (!m2m_dev->m2m_ops->job_ready(m2m_ctx->priv))) { -- cgit v0.10.2 From 644469aefbac3c007284b43ac932ba6f1794a110 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Sat, 25 May 2013 07:25:55 -0300 Subject: [media] s5p-mfc: Remove unused s5p_mfc_get_decoded_status_v6() function MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fixes following compilation warning: CC [M] drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.o drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c:1733:12: warning: ‘s5p_mfc_get_decoded_status_v6’ defined but not used It assigns existing but not used s5p_mfc_get_dec_status_v6() function to the get_dec_status callback. It seems the get_dec_status callback is not used anyway, as there is no corresponding s5p_mfc_hw_call(). Signed-off-by: Sylwester Nawrocki Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c index 383ae77..5eeaecb 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c @@ -62,12 +62,6 @@ static void s5p_mfc_release_dec_desc_buffer_v6(struct s5p_mfc_ctx *ctx) /* NOP */ } -static int s5p_mfc_get_dec_status_v6(struct s5p_mfc_dev *dev) -{ - /* NOP */ - return -1; -} - /* Allocate codec buffers */ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx) { @@ -1713,7 +1707,7 @@ static int s5p_mfc_get_dspl_status_v6(struct s5p_mfc_dev *dev) return mfc_read(dev, S5P_FIMV_D_DISPLAY_STATUS_V6); } -static int s5p_mfc_get_decoded_status_v6(struct s5p_mfc_dev *dev) +static int s5p_mfc_get_dec_status_v6(struct s5p_mfc_dev *dev) { return mfc_read(dev, S5P_FIMV_D_DECODED_STATUS_V6); } -- cgit v0.10.2 From fc906b6d189f26e869b11b94eaa9a733b3950740 Mon Sep 17 00:00:00 2001 From: Arun Kumar K Date: Mon, 27 May 2013 03:39:29 -0300 Subject: [media] s5p-mfc: Remove special clock usage in driver MFC uses two clocks - MFC gate clock and special clock which is named as "sclk_mfc" in exynos4 and "aclk_333" in exynos5 SoC. The driver was doing just a clk_prepare on this special clock without a clk_enable call. As this sclk is the parent of gate clock, it gets prepared and enabled along with the gate clock. So there is no need for the driver to use this sclk. This patch removes the sclk usage from driver. Signed-off-by: Arun Kumar K Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c index 3b2345e..78280eb 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c @@ -1362,7 +1362,6 @@ static struct s5p_mfc_variant mfc_drvdata_v5 = { .port_num = MFC_NUM_PORTS, .buf_size = &buf_size_v5, .buf_align = &mfc_buf_align_v5, - .mclk_name = "sclk_mfc", .fw_name = "s5p-mfc.fw", }; @@ -1389,7 +1388,6 @@ static struct s5p_mfc_variant mfc_drvdata_v6 = { .port_num = MFC_NUM_PORTS_V6, .buf_size = &buf_size_v6, .buf_align = &mfc_buf_align_v6, - .mclk_name = "aclk_333", .fw_name = "s5p-mfc-v6.fw", }; diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h index 975d1b2..4e81ab8 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h @@ -232,7 +232,6 @@ struct s5p_mfc_variant { unsigned int port_num; struct s5p_mfc_buf_size *buf_size; struct s5p_mfc_buf_align *buf_align; - char *mclk_name; char *fw_name; }; diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c index 6aa38a5..cab6e0b 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c @@ -50,19 +50,6 @@ int s5p_mfc_init_pm(struct s5p_mfc_dev *dev) goto err_p_ip_clk; } - pm->clock = clk_get(&dev->plat_dev->dev, dev->variant->mclk_name); - if (IS_ERR(pm->clock)) { - mfc_err("Failed to get MFC clock\n"); - ret = PTR_ERR(pm->clock); - goto err_g_ip_clk_2; - } - - ret = clk_prepare(pm->clock); - if (ret) { - mfc_err("Failed to prepare MFC clock\n"); - goto err_p_ip_clk_2; - } - atomic_set(&pm->power, 0); #ifdef CONFIG_PM_RUNTIME pm->device = &dev->plat_dev->dev; @@ -72,10 +59,6 @@ int s5p_mfc_init_pm(struct s5p_mfc_dev *dev) atomic_set(&clk_ref, 0); #endif return 0; -err_p_ip_clk_2: - clk_put(pm->clock); -err_g_ip_clk_2: - clk_unprepare(pm->clock_gate); err_p_ip_clk: clk_put(pm->clock_gate); err_g_ip_clk: @@ -86,8 +69,6 @@ void s5p_mfc_final_pm(struct s5p_mfc_dev *dev) { clk_unprepare(pm->clock_gate); clk_put(pm->clock_gate); - clk_unprepare(pm->clock); - clk_put(pm->clock); #ifdef CONFIG_PM_RUNTIME pm_runtime_disable(pm->device); #endif -- cgit v0.10.2 From ac5f867fbfbd1ff5a43e796ed470deff42b630d2 Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Tue, 28 May 2013 03:26:14 -0300 Subject: [media] s5p-mfc: separate encoder parameters for h264 and mpeg4 This patch fixes a bug which caused overwriting h264 codec parameters by mpeg4 parameters during V4L2 control setting. Signed-off-by: Andrzej Hajda Signed-off-by: Kyungmin Park Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h index 4e81ab8..ef4074c 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h @@ -438,7 +438,7 @@ struct s5p_mfc_enc_params { u32 rc_framerate_num; u32 rc_framerate_denom; - union { + struct { struct s5p_mfc_h264_enc_params h264; struct s5p_mfc_mpeg4_enc_params mpeg4; } codec; -- cgit v0.10.2 From 69c9fe6f4afae54cad12635bdb8e90e7d832e240 Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Tue, 28 May 2013 03:26:15 -0300 Subject: [media] s5p-mfc: v4l2 controls setup routine moved to initialization code Callback .start_streaming is called once for every queue, so v4l2_ctrl_handler_setup was called twice during stream start. Moving v4l2_ctrl_handler_setup to context initialization reduces numbers of calls and seems to be more consistent with API. Signed-off-by: Andrzej Hajda Signed-off-by: Kyungmin Park Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c index 5e019aa..5d97a98 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c @@ -1789,7 +1789,6 @@ static int s5p_mfc_start_streaming(struct vb2_queue *q, unsigned int count) } } - v4l2_ctrl_handler_setup(&ctx->ctrl_handler); /* If context is ready then dev = work->data;schedule it to run */ if (s5p_mfc_ctx_ready(ctx)) set_work_bit_irqsave(ctx); @@ -1950,6 +1949,7 @@ int s5p_mfc_enc_ctrls_setup(struct s5p_mfc_ctx *ctx) if (controls[i].is_volatile && ctx->ctrls[i]) ctx->ctrls[i]->flags |= V4L2_CTRL_FLAG_VOLATILE; } + v4l2_ctrl_handler_setup(&ctx->ctrl_handler); return 0; } -- cgit v0.10.2 From 4130eabc55f4d4d1510d2e1c556fe3e0237c5ba5 Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Tue, 28 May 2013 03:26:16 -0300 Subject: [media] s5p-mfc: added missing end-of-lines in debug messages Many debug messages missed end-of-line. Signed-off-by: Andrzej Hajda Signed-off-by: Kyungmin Park Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c index 78280eb..d12faa6 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c @@ -562,7 +562,7 @@ static void s5p_mfc_handle_stream_complete(struct s5p_mfc_ctx *ctx, struct s5p_mfc_dev *dev = ctx->dev; struct s5p_mfc_buf *mb_entry; - mfc_debug(2, "Stream completed"); + mfc_debug(2, "Stream completed\n"); s5p_mfc_clear_int_flags(dev); ctx->int_type = reason; diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_debug.h b/drivers/media/platform/s5p-mfc/s5p_mfc_debug.h index bd5cd4a..8e608f5 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_debug.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_debug.h @@ -30,8 +30,8 @@ extern int debug; #define mfc_debug(level, fmt, args...) #endif -#define mfc_debug_enter() mfc_debug(5, "enter") -#define mfc_debug_leave() mfc_debug(5, "leave") +#define mfc_debug_enter() mfc_debug(5, "enter\n") +#define mfc_debug_leave() mfc_debug(5, "leave\n") #define mfc_err(fmt, args...) \ do { \ diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c index 5d97a98..2549967 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c @@ -719,9 +719,9 @@ static int enc_post_frame_start(struct s5p_mfc_ctx *ctx) slice_type = s5p_mfc_hw_call(dev->mfc_ops, get_enc_slice_type, dev); strm_size = s5p_mfc_hw_call(dev->mfc_ops, get_enc_strm_size, dev); - mfc_debug(2, "Encoded slice type: %d", slice_type); - mfc_debug(2, "Encoded stream size: %d", strm_size); - mfc_debug(2, "Display order: %d", + mfc_debug(2, "Encoded slice type: %d\n", slice_type); + mfc_debug(2, "Encoded stream size: %d\n", strm_size); + mfc_debug(2, "Display order: %d\n", mfc_read(dev, S5P_FIMV_ENC_SI_PIC_CNT)); spin_lock_irqsave(&dev->irqlock, flags); if (slice_type >= 0) { @@ -1546,14 +1546,14 @@ int vidioc_encoder_cmd(struct file *file, void *priv, spin_lock_irqsave(&dev->irqlock, flags); if (list_empty(&ctx->src_queue)) { - mfc_debug(2, "EOS: empty src queue, entering finishing state"); + mfc_debug(2, "EOS: empty src queue, entering finishing state\n"); ctx->state = MFCINST_FINISHING; if (s5p_mfc_ctx_ready(ctx)) set_work_bit_irqsave(ctx); spin_unlock_irqrestore(&dev->irqlock, flags); s5p_mfc_hw_call(dev->mfc_ops, try_run, dev); } else { - mfc_debug(2, "EOS: marking last buffer of stream"); + mfc_debug(2, "EOS: marking last buffer of stream\n"); buf = list_entry(ctx->src_queue.prev, struct s5p_mfc_buf, list); if (buf->flags & MFC_BUF_FLAG_USED) @@ -1622,9 +1622,9 @@ static int check_vb_with_fmt(struct s5p_mfc_fmt *fmt, struct vb2_buffer *vb) mfc_err("failed to get plane cookie\n"); return -EINVAL; } - mfc_debug(2, "index: %d, plane[%d] cookie: 0x%08zx", - vb->v4l2_buf.index, i, - vb2_dma_contig_plane_dma_addr(vb, i)); + mfc_debug(2, "index: %d, plane[%d] cookie: 0x%08zx\n", + vb->v4l2_buf.index, i, + vb2_dma_contig_plane_dma_addr(vb, i)); } return 0; } diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c index 0af05a2..368582b 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c @@ -1275,8 +1275,8 @@ static int s5p_mfc_run_enc_frame(struct s5p_mfc_ctx *ctx) spin_unlock_irqrestore(&dev->irqlock, flags); dev->curr_ctx = ctx->num; s5p_mfc_clean_ctx_int_flags(ctx); - mfc_debug(2, "encoding buffer with index=%d state=%d", - src_mb ? src_mb->b->v4l2_buf.index : -1, ctx->state); + mfc_debug(2, "encoding buffer with index=%d state=%d\n", + src_mb ? src_mb->b->v4l2_buf.index : -1, ctx->state); s5p_mfc_encode_one_frame_v5(ctx); return 0; } diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c index 5eeaecb..7d4c5e1 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c @@ -442,8 +442,8 @@ static int s5p_mfc_set_enc_stream_buffer_v6(struct s5p_mfc_ctx *ctx, WRITEL(addr, S5P_FIMV_E_STREAM_BUFFER_ADDR_V6); /* 16B align */ WRITEL(size, S5P_FIMV_E_STREAM_BUFFER_SIZE_V6); - mfc_debug(2, "stream buf addr: 0x%08lx, size: 0x%d", - addr, size); + mfc_debug(2, "stream buf addr: 0x%08lx, size: 0x%d\n", + addr, size); return 0; } @@ -456,8 +456,8 @@ static void s5p_mfc_set_enc_frame_buffer_v6(struct s5p_mfc_ctx *ctx, WRITEL(y_addr, S5P_FIMV_E_SOURCE_LUMA_ADDR_V6); /* 256B align */ WRITEL(c_addr, S5P_FIMV_E_SOURCE_CHROMA_ADDR_V6); - mfc_debug(2, "enc src y buf addr: 0x%08lx", y_addr); - mfc_debug(2, "enc src c buf addr: 0x%08lx", c_addr); + mfc_debug(2, "enc src y buf addr: 0x%08lx\n", y_addr); + mfc_debug(2, "enc src c buf addr: 0x%08lx\n", c_addr); } static void s5p_mfc_get_enc_frame_buffer_v6(struct s5p_mfc_ctx *ctx, @@ -472,8 +472,8 @@ static void s5p_mfc_get_enc_frame_buffer_v6(struct s5p_mfc_ctx *ctx, enc_recon_y_addr = READL(S5P_FIMV_E_RECON_LUMA_DPB_ADDR_V6); enc_recon_c_addr = READL(S5P_FIMV_E_RECON_CHROMA_DPB_ADDR_V6); - mfc_debug(2, "recon y addr: 0x%08lx", enc_recon_y_addr); - mfc_debug(2, "recon c addr: 0x%08lx", enc_recon_c_addr); + mfc_debug(2, "recon y addr: 0x%08lx\n", enc_recon_y_addr); + mfc_debug(2, "recon c addr: 0x%08lx\n", enc_recon_c_addr); } /* Set encoding ref & codec buffer */ @@ -1424,8 +1424,8 @@ static inline int s5p_mfc_run_enc_frame(struct s5p_mfc_ctx *ctx) src_y_addr = vb2_dma_contig_plane_dma_addr(src_mb->b, 0); src_c_addr = vb2_dma_contig_plane_dma_addr(src_mb->b, 1); - mfc_debug(2, "enc src y addr: 0x%08lx", src_y_addr); - mfc_debug(2, "enc src c addr: 0x%08lx", src_c_addr); + mfc_debug(2, "enc src y addr: 0x%08lx\n", src_y_addr); + mfc_debug(2, "enc src c addr: 0x%08lx\n", src_c_addr); s5p_mfc_set_enc_frame_buffer_v6(ctx, src_y_addr, src_c_addr); diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c index cab6e0b..11d5f1d 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c @@ -79,7 +79,7 @@ int s5p_mfc_clock_on(void) int ret; #ifdef CLK_DEBUG atomic_inc(&clk_ref); - mfc_debug(3, "+ %d", atomic_read(&clk_ref)); + mfc_debug(3, "+ %d\n", atomic_read(&clk_ref)); #endif ret = clk_enable(pm->clock_gate); return ret; @@ -89,7 +89,7 @@ void s5p_mfc_clock_off(void) { #ifdef CLK_DEBUG atomic_dec(&clk_ref); - mfc_debug(3, "- %d", atomic_read(&clk_ref)); + mfc_debug(3, "- %d\n", atomic_read(&clk_ref)); #endif clk_disable(pm->clock_gate); } -- cgit v0.10.2 From d1c1cc664342cf197afeea4b0dd8145d1edee35c Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Wed, 29 May 2013 00:10:00 -0300 Subject: [media] s5p-mfc: Add NULL check for allocated buffer In certain cases, dma_alloc_coherent returns NULL. Add check for NULL pointer. Signed-off-by: Sachin Kamat Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c index 2e5f30b..dc1fc94 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c @@ -38,7 +38,7 @@ int s5p_mfc_alloc_firmware(struct s5p_mfc_dev *dev) dev->fw_virt_addr = dma_alloc_coherent(dev->mem_dev_l, dev->fw_size, &dev->bank1, GFP_KERNEL); - if (IS_ERR(dev->fw_virt_addr)) { + if (IS_ERR_OR_NULL(dev->fw_virt_addr)) { dev->fw_virt_addr = NULL; mfc_err("Allocating bitprocessor buffer failed\n"); return -ENOMEM; -- cgit v0.10.2 From d2983cdb480157f637df07723f28aaa657b1080d Mon Sep 17 00:00:00 2001 From: Ferruh Yigit Date: Thu, 23 May 2013 09:56:55 -0700 Subject: Input: cyttsp - fix memcpy size param memcpy param is wrong because of offset in bl_cmd, this may corrupt the stack which may cause a crash. Tested-by: Ferruh Yigit on TMA300-DVK Signed-off-by: Ferruh Yigit Acked-by: Javier Martinez Canillas Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/cyttsp_core.c b/drivers/input/touchscreen/cyttsp_core.c index 8e60437..97ba891 100644 --- a/drivers/input/touchscreen/cyttsp_core.c +++ b/drivers/input/touchscreen/cyttsp_core.c @@ -133,7 +133,7 @@ static int cyttsp_exit_bl_mode(struct cyttsp *ts) memcpy(bl_cmd, bl_command, sizeof(bl_command)); if (ts->pdata->bl_keys) memcpy(&bl_cmd[sizeof(bl_command) - CY_NUM_BL_KEYS], - ts->pdata->bl_keys, sizeof(bl_command)); + ts->pdata->bl_keys, CY_NUM_BL_KEYS); error = ttsp_write_block_data(ts, CY_REG_BASE, sizeof(bl_cmd), bl_cmd); -- cgit v0.10.2 From fbd5e77e65c36d84dbcd71a19c4d1526f4604bdb Mon Sep 17 00:00:00 2001 From: Ferruh Yigit Date: Thu, 23 May 2013 10:04:36 -0700 Subject: Input: cyttsp - add missing handshake For the devices that has blocking with timeout communication, these extra handshakes will prevent one timeout delay in startup sequence Tested-by: Ferruh Yigit on TMA300-DVK Signed-off-by: Ferruh Yigit Acked-by: Javier Martinez Canillas Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/cyttsp_core.c b/drivers/input/touchscreen/cyttsp_core.c index 97ba891..ae89d26 100644 --- a/drivers/input/touchscreen/cyttsp_core.c +++ b/drivers/input/touchscreen/cyttsp_core.c @@ -116,6 +116,15 @@ static int ttsp_send_command(struct cyttsp *ts, u8 cmd) return ttsp_write_block_data(ts, CY_REG_BASE, sizeof(cmd), &cmd); } +static int cyttsp_handshake(struct cyttsp *ts) +{ + if (ts->pdata->use_hndshk) + return ttsp_send_command(ts, + ts->xy_data.hst_mode ^ CY_HNDSHK_BIT); + + return 0; +} + static int cyttsp_load_bl_regs(struct cyttsp *ts) { memset(&ts->bl_data, 0, sizeof(ts->bl_data)); @@ -167,6 +176,10 @@ static int cyttsp_set_operational_mode(struct cyttsp *ts) if (error) return error; + error = cyttsp_handshake(ts); + if (error) + return error; + return ts->xy_data.act_dist == CY_ACT_DIST_DFLT ? -EIO : 0; } @@ -188,6 +201,10 @@ static int cyttsp_set_sysinfo_mode(struct cyttsp *ts) if (error) return error; + error = cyttsp_handshake(ts); + if (error) + return error; + if (!ts->sysinfo_data.tts_verh && !ts->sysinfo_data.tts_verl) return -EIO; @@ -344,12 +361,9 @@ static irqreturn_t cyttsp_irq(int irq, void *handle) goto out; /* provide flow control handshake */ - if (ts->pdata->use_hndshk) { - error = ttsp_send_command(ts, - ts->xy_data.hst_mode ^ CY_HNDSHK_BIT); - if (error) - goto out; - } + error = cyttsp_handshake(ts); + if (error) + goto out; if (unlikely(ts->state == CY_IDLE_STATE)) goto out; -- cgit v0.10.2 From d3bf073aa7d50f06f81b4065a39fd6dc046f8bb2 Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Wed, 5 Jun 2013 22:42:51 -0700 Subject: Input: cyttsp - fix swapped mfg_stat and mfg_cmd registers The command and status register in the driver were swapped with respect to the order specified in the datasheet (CY8CTMA140). Confirmed with Cypress that the order in the datasheet is correct. Signed-off-by: Matthias Kaehlcke Acked-by: Javier Martinez Canillas Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/cyttsp_core.h b/drivers/input/touchscreen/cyttsp_core.h index 1aa3c69..f1ebde3 100644 --- a/drivers/input/touchscreen/cyttsp_core.h +++ b/drivers/input/touchscreen/cyttsp_core.h @@ -67,8 +67,8 @@ struct cyttsp_xydata { /* TTSP System Information interface definition */ struct cyttsp_sysinfo_data { u8 hst_mode; - u8 mfg_cmd; u8 mfg_stat; + u8 mfg_cmd; u8 cid[3]; u8 tt_undef1; u8 uid[8]; -- cgit v0.10.2 From 72b5322f11ff0abf6a52b3007486656578d2c982 Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Mon, 3 Jun 2013 17:17:15 +0800 Subject: clk: remove notifier from list before freeing it MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The @cn is stay in @clk_notifier_list after it is freed, it cause memory corruption. Example, if @clk is registered(first), unregistered(first), registered(second), unregistered(second). The freed @cn will be used when @clk is registered(second), and the bug will be happened when @clk is unregistered(second): [ 517.040000] clk_notif_dbg clk_notif_dbg.1: clk_notifier_unregister() [ 517.040000] Unable to handle kernel paging request at virtual address 00df3008 [ 517.050000] pgd = ed858000 [ 517.050000] [00df3008] *pgd=00000000 [ 517.060000] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 517.060000] Modules linked in: clk_notif_dbg(O-) [last unloaded: clk_notif_dbg] [ 517.060000] CPU: 1 PID: 499 Comm: modprobe Tainted: G O 3.10.0-rc3-00119-ga93cb29-dirty #85 [ 517.060000] task: ee1e0180 ti: ee3e6000 task.ti: ee3e6000 [ 517.060000] PC is at srcu_readers_seq_idx+0x48/0x84 [ 517.060000] LR is at srcu_readers_seq_idx+0x60/0x84 [ 517.060000] pc : [] lr : [] psr: 80070013 [ 517.060000] sp : ee3e7d48 ip : 00000000 fp : ee3e7d6c [ 517.060000] r10: 00000000 r9 : ee3e6000 r8 : 00000000 [ 517.060000] r7 : ed84fe4c r6 : c068ec90 r5 : c068e430 r4 : 00000000 [ 517.060000] r3 : 00df3000 r2 : 00000000 r1 : 00000002 r0 : 00000000 [ 517.060000] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 517.060000] Control: 18c5387d Table: 2d85804a DAC: 00000015 [ 517.060000] Process modprobe (pid: 499, stack limit = 0xee3e6238) [ 517.060000] Stack: (0xee3e7d48 to 0xee3e8000) .... [ 517.060000] [] (srcu_readers_seq_idx+0x48/0x84) from [] (try_check_zero+0x34/0xfc) [ 517.060000] [] (try_check_zero+0x34/0xfc) from [] (srcu_advance_batches+0x58/0x114) [ 517.060000] [] (srcu_advance_batches+0x58/0x114) from [] (__synchronize_srcu+0x114/0x1ac) [ 517.060000] [] (__synchronize_srcu+0x114/0x1ac) from [] (synchronize_srcu+0x2c/0x34) [ 517.060000] [] (synchronize_srcu+0x2c/0x34) from [] (srcu_notifier_chain_unregister+0x68/0x74) [ 517.060000] [] (srcu_notifier_chain_unregister+0x68/0x74) from [] (clk_notifier_unregister+0x7c/0xc0) [ 517.060000] [] (clk_notifier_unregister+0x7c/0xc0) from [] (clk_notif_dbg_remove+0x34/0x9c [clk_notif_dbg]) [ 517.060000] [] (clk_notif_dbg_remove+0x34/0x9c [clk_notif_dbg]) from [] (platform_drv_remove+0x24/0x28) [ 517.060000] [] (platform_drv_remove+0x24/0x28) from [] (__device_release_driver+0x8c/0xd4) [ 517.060000] [] (__device_release_driver+0x8c/0xd4) from [] (driver_detach+0x9c/0xc4) [ 517.060000] [] (driver_detach+0x9c/0xc4) from [] (bus_remove_driver+0xcc/0xfc) [ 517.060000] [] (bus_remove_driver+0xcc/0xfc) from [] (driver_unregister+0x54/0x78) [ 517.060000] [] (driver_unregister+0x54/0x78) from [] (platform_driver_unregister+0x1c/0x20) [ 517.060000] [] (platform_driver_unregister+0x1c/0x20) from [] (clk_notif_dbg_driver_exit+0x14/0x1c [clk_notif_dbg]) [ 517.060000] [] (clk_notif_dbg_driver_exit+0x14/0x1c [clk_notif_dbg]) from [] (SyS_delete_module+0x200/0x28c) [ 517.060000] [] (SyS_delete_module+0x200/0x28c) from [] (ret_fast_syscall+0x0/0x48) [ 517.060000] Code: e5973004 e7911102 e0833001 e2881002 (e7933101) Cc: stable@kernel.org Reported-by: Sören Brinkmann Signed-off-by: Lai Jiangshan Tested-by: Sören Brinkmann Signed-off-by: Mike Turquette [mturquette@linaro.org: shortened $SUBJECT] diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 934cfd1..1144e8c 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -1955,6 +1955,7 @@ int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb) /* XXX the notifier code should handle this better */ if (!cn->notifier_head.head) { srcu_cleanup_notifier_head(&cn->notifier_head); + list_del(&cn->node); kfree(cn); } -- cgit v0.10.2 From 3cf138a6393d4ae2aeabce4c4b776d7d15cce69b Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 31 May 2013 08:40:35 -0300 Subject: [media] exynos4-is: Prevent NULL pointer dereference when firmware isn't loaded Ensure the firmware isn't accessed in the driver when the firmware loading routine has not completed. This fixes a potential kernel crash: [ 96.510000] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 96.520000] pgd = ee604000 [ 96.520000] [00000000] *pgd=6e947831, *pte=00000000, *ppte=00000000 [ 96.530000] Internal error: Oops: 17 [#1] PREEMPT SMP ARM [ 96.530000] Modules linked in: [ 96.530000] CPU: 2 PID: 2787 Comm: camera_test Not tainted 3.10.0-rc1-00269-gcdbde37-dirty #2158 [ 96.545000] task: ee42e400 ti: edfcc000 task.ti: edfcc000 [ 96.545000] PC is at fimc_is_start_firmware+0x14/0x94 [ 96.545000] LR is at fimc_isp_subdev_s_power+0x13c/0x1f8 ... [ 96.745000] [] (fimc_is_start_firmware+0x14/0x94) from [] (fimc_isp_subdev_s_power+0x13c/0x1f8) [ 96.745000] [] (fimc_isp_subdev_s_power+0x13c/0x1f8) from [] (__subdev_set_power+0x70/0x84) [ 96.745000] [] (__subdev_set_power+0x70/0x84) from [] (fimc_pipeline_s_power+0xc8/0x164) [ 96.745000] [] (fimc_pipeline_s_power+0xc8/0x164) from [] (__fimc_pipeline_open+0x90/0x268) [ 96.745000] [] (__fimc_pipeline_open+0x90/0x268) from [] (fimc_capture_open+0xe4/0x1ec) [ 96.745000] [] (fimc_capture_open+0xe4/0x1ec) from [] (v4l2_open+0xa8/0xe4) [ 96.745000] [] (v4l2_open+0xa8/0xe4) from [] (chrdev_open+0x9c/0x158) [ 96.745000] [] (chrdev_open+0x9c/0x158) from [] (do_dentry_open+0x1f4/0x27c) [ 96.745000] [] (do_dentry_open+0x1f4/0x27c) from [] (finish_open+0x34/0x50) [ 96.745000] [] (finish_open+0x34/0x50) from [] (do_last+0x59c/0xbcc) [ 96.745000] [] (do_last+0x59c/0xbcc) from [] (path_openat+0xb0/0x484) [ 96.745000] [] (path_openat+0xb0/0x484) from [] (do_filp_open+0x30/0x84) [ 96.745000] [] (do_filp_open+0x30/0x84) from [] (do_sys_open+0xe8/0x170) [ 96.745000] [] (do_sys_open+0xe8/0x170) from [] (ret_fast_syscall+0x0/0x30) Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/exynos4-is/fimc-is.c b/drivers/media/platform/exynos4-is/fimc-is.c index 47c6363..1adf6df 100644 --- a/drivers/media/platform/exynos4-is/fimc-is.c +++ b/drivers/media/platform/exynos4-is/fimc-is.c @@ -326,6 +326,11 @@ int fimc_is_start_firmware(struct fimc_is *is) struct device *dev = &is->pdev->dev; int ret; + if (is->fw.f_w == NULL) { + dev_err(dev, "firmware is not loaded\n"); + return -EINVAL; + } + memcpy(is->memory.vaddr, is->fw.f_w->data, is->fw.f_w->size); wmb(); @@ -941,7 +946,8 @@ static int fimc_is_remove(struct platform_device *pdev) vb2_dma_contig_cleanup_ctx(is->alloc_ctx); fimc_is_put_clocks(is); fimc_is_debugfs_remove(is); - release_firmware(is->fw.f_w); + if (is->fw.f_w) + release_firmware(is->fw.f_w); fimc_is_free_cpu_memory(is); return 0; -- cgit v0.10.2 From b4155d7d5b2c4e82238d629c451f7c27c9f37d9c Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 31 May 2013 08:40:36 -0300 Subject: [media] exynos4-is: Ensure fimc-is clocks are not enabled until properly configured Use clk_prepare_enable/clk_unprepare_disable instead of preparing the clocks during the driver initalization and then using just clk_disable/ clk_enable. The clock framework doesn't guarantee a clock will not get enabled during e.g. clk_set_parent if clk_prepare has been called on it. So we ensure clk_prepare() is called only when it is safe to enable the clocks, i.e. the parent clocks and the clocks' frequencies are set. It must be ensured the FIMC-IS clocks have proper frequencies before they are enabled, otherwise the whole system will hang. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyunmin Park Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/exynos4-is/fimc-is.c b/drivers/media/platform/exynos4-is/fimc-is.c index 1adf6df..89f28fe 100644 --- a/drivers/media/platform/exynos4-is/fimc-is.c +++ b/drivers/media/platform/exynos4-is/fimc-is.c @@ -71,7 +71,6 @@ static void fimc_is_put_clocks(struct fimc_is *is) for (i = 0; i < ISS_CLKS_MAX; i++) { if (IS_ERR(is->clocks[i])) continue; - clk_unprepare(is->clocks[i]); clk_put(is->clocks[i]); is->clocks[i] = ERR_PTR(-EINVAL); } @@ -90,12 +89,6 @@ static int fimc_is_get_clocks(struct fimc_is *is) ret = PTR_ERR(is->clocks[i]); goto err; } - ret = clk_prepare(is->clocks[i]); - if (ret < 0) { - clk_put(is->clocks[i]); - is->clocks[i] = ERR_PTR(-EINVAL); - goto err; - } } return 0; @@ -103,7 +96,7 @@ err: fimc_is_put_clocks(is); dev_err(&is->pdev->dev, "failed to get clock: %s\n", fimc_is_clocks[i]); - return -ENXIO; + return ret; } static int fimc_is_setup_clocks(struct fimc_is *is) @@ -144,7 +137,7 @@ int fimc_is_enable_clocks(struct fimc_is *is) for (i = 0; i < ISS_GATE_CLKS_MAX; i++) { if (IS_ERR(is->clocks[i])) continue; - ret = clk_enable(is->clocks[i]); + ret = clk_prepare_enable(is->clocks[i]); if (ret < 0) { dev_err(&is->pdev->dev, "clock %s enable failed\n", fimc_is_clocks[i]); @@ -163,7 +156,7 @@ void fimc_is_disable_clocks(struct fimc_is *is) for (i = 0; i < ISS_GATE_CLKS_MAX; i++) { if (!IS_ERR(is->clocks[i])) { - clk_disable(is->clocks[i]); + clk_disable_unprepare(is->clocks[i]); pr_debug("disabled clock: %s\n", fimc_is_clocks[i]); } } -- cgit v0.10.2 From ac2a4a86643aa74236508f0a8c0e34b0622b0b46 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 31 May 2013 08:40:37 -0300 Subject: [media] exynos4-is: Fix reported colorspace at FIMC-IS-ISP subdev The FIMC-IS-ISP handles only Bayer formats thus V4L2_COLORSPACE_SRGB should be used. This change applies to the code first added in v3.10. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/exynos4-is/fimc-isp.c b/drivers/media/platform/exynos4-is/fimc-isp.c index d63947f..7ede30b 100644 --- a/drivers/media/platform/exynos4-is/fimc-isp.c +++ b/drivers/media/platform/exynos4-is/fimc-isp.c @@ -138,7 +138,7 @@ static int fimc_isp_subdev_get_fmt(struct v4l2_subdev *sd, return 0; } - mf->colorspace = V4L2_COLORSPACE_JPEG; + mf->colorspace = V4L2_COLORSPACE_SRGB; mutex_lock(&isp->subdev_lock); __is_get_frame_size(is, &cur_fmt); @@ -194,7 +194,7 @@ static int fimc_isp_subdev_set_fmt(struct v4l2_subdev *sd, v4l2_dbg(1, debug, sd, "%s: pad%d: code: 0x%x, %dx%d\n", __func__, fmt->pad, mf->code, mf->width, mf->height); - mf->colorspace = V4L2_COLORSPACE_JPEG; + mf->colorspace = V4L2_COLORSPACE_SRGB; mutex_lock(&isp->subdev_lock); __isp_subdev_try_format(isp, fmt); -- cgit v0.10.2 From 6301b13213d55e51b7255b1098618ba99d2945cd Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 10 May 2013 12:46:35 -0300 Subject: [media] exynos4-is: Remove "sysreg" clock handling The "sysreg" clock is required by multiple subsystems and none of the other drivers handles this clock explicitly. It is currently assumed that this clock is always on, left in its default state after system reset. Remove handling of this clock from the FIMC-IS driver to avoid breaking other subsystems. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/exynos4-is/fimc-is.c b/drivers/media/platform/exynos4-is/fimc-is.c index 89f28fe..520e439 100644 --- a/drivers/media/platform/exynos4-is/fimc-is.c +++ b/drivers/media/platform/exynos4-is/fimc-is.c @@ -48,7 +48,6 @@ static char *fimc_is_clocks[ISS_CLKS_MAX] = { [ISS_CLK_LITE0] = "lite0", [ISS_CLK_LITE1] = "lite1", [ISS_CLK_MPLL] = "mpll", - [ISS_CLK_SYSREG] = "sysreg", [ISS_CLK_ISP] = "isp", [ISS_CLK_DRC] = "drc", [ISS_CLK_FD] = "fd", diff --git a/drivers/media/platform/exynos4-is/fimc-is.h b/drivers/media/platform/exynos4-is/fimc-is.h index f5275a5..606a7c9 100644 --- a/drivers/media/platform/exynos4-is/fimc-is.h +++ b/drivers/media/platform/exynos4-is/fimc-is.h @@ -73,7 +73,6 @@ enum { ISS_CLK_LITE0, ISS_CLK_LITE1, ISS_CLK_MPLL, - ISS_CLK_SYSREG, ISS_CLK_ISP, ISS_CLK_DRC, ISS_CLK_FD, -- cgit v0.10.2 From dfd50fc9030a62521838eecbe488e1962edcba80 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 29 May 2013 05:03:32 -0300 Subject: [media] DocBook/media/v4l: update version number The version number was still 3.9: update to 3.10. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml index bfc93cd..bfe823d 100644 --- a/Documentation/DocBook/media/v4l/v4l2.xml +++ b/Documentation/DocBook/media/v4l/v4l2.xml @@ -493,7 +493,7 @@ and discussions on the V4L mailing list. Video for Linux Two API Specification - Revision 3.9 + Revision 3.10 &sub-common; -- cgit v0.10.2 From 609c4c12af79b1ba5fd2d31727a95dd3a319c0ae Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 29 May 2013 10:44:22 -0300 Subject: [media] cx88: fix NULL pointer dereference This fixes a NULL pointer deference when loading the cx88_dvb module for a Hauppauge HVR4000. The bugzilla bug report is here: https://bugzilla.kernel.org/show_bug.cgi?id=56271 The cause is that the wm8775 is optional, so even though the board info says there is one, it doesn't have to be there. Checking whether the module was actually loaded is much safer. Note that this driver is quite buggy when it comes to unloading and reloading modules. Unloading cx8800 and reloading it again will still cause a crash, most likely because either the i2c bus isn't unloaded at the right time and/or the v4l2_device_unregister isn't called at the right time. Signed-off-by: Hans Verkuil Reported-by: Sebastian Frei Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/pci/cx88/cx88-alsa.c b/drivers/media/pci/cx88/cx88-alsa.c index 27d6262..aba5b1c 100644 --- a/drivers/media/pci/cx88/cx88-alsa.c +++ b/drivers/media/pci/cx88/cx88-alsa.c @@ -615,7 +615,7 @@ static int snd_cx88_volume_put(struct snd_kcontrol *kcontrol, int changed = 0; u32 old; - if (core->board.audio_chip == V4L2_IDENT_WM8775) + if (core->sd_wm8775) snd_cx88_wm8775_volume_put(kcontrol, value); left = value->value.integer.value[0] & 0x3f; @@ -682,8 +682,7 @@ static int snd_cx88_switch_put(struct snd_kcontrol *kcontrol, vol ^= bit; cx_swrite(SHADOW_AUD_VOL_CTL, AUD_VOL_CTL, vol); /* Pass mute onto any WM8775 */ - if ((core->board.audio_chip == V4L2_IDENT_WM8775) && - ((1<<6) == bit)) + if (core->sd_wm8775 && ((1<<6) == bit)) wm8775_s_ctrl(core, V4L2_CID_AUDIO_MUTE, 0 != (vol & bit)); ret = 1; } @@ -903,7 +902,7 @@ static int cx88_audio_initdev(struct pci_dev *pci, goto error; /* If there's a wm8775 then add a Line-In ALC switch */ - if (core->board.audio_chip == V4L2_IDENT_WM8775) + if (core->sd_wm8775) snd_ctl_add(card, snd_ctl_new1(&snd_cx88_alc_switch, chip)); strcpy (card->driver, "CX88x"); diff --git a/drivers/media/pci/cx88/cx88-video.c b/drivers/media/pci/cx88/cx88-video.c index 1b00615..c7a9be1 100644 --- a/drivers/media/pci/cx88/cx88-video.c +++ b/drivers/media/pci/cx88/cx88-video.c @@ -385,8 +385,7 @@ int cx88_video_mux(struct cx88_core *core, unsigned int input) /* The wm8775 module has the "2" route hardwired into the initialization. Some boards may use different routes for different inputs. HVR-1300 surely does */ - if (core->board.audio_chip && - core->board.audio_chip == V4L2_IDENT_WM8775) { + if (core->sd_wm8775) { call_all(core, audio, s_routing, INPUT(input).audioroute, 0, 0); } @@ -771,8 +770,7 @@ static int video_open(struct file *file) cx_write(MO_GP1_IO, core->board.radio.gpio1); cx_write(MO_GP2_IO, core->board.radio.gpio2); if (core->board.radio.audioroute) { - if(core->board.audio_chip && - core->board.audio_chip == V4L2_IDENT_WM8775) { + if (core->sd_wm8775) { call_all(core, audio, s_routing, core->board.radio.audioroute, 0, 0); } @@ -959,7 +957,7 @@ static int cx8800_s_aud_ctrl(struct v4l2_ctrl *ctrl) u32 value,mask; /* Pass changes onto any WM8775 */ - if (core->board.audio_chip == V4L2_IDENT_WM8775) { + if (core->sd_wm8775) { switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: wm8775_s_ctrl(core, ctrl->id, ctrl->val); -- cgit v0.10.2 From 3963d4fb869de1144aebe6eef074995f086961c4 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 2 Jun 2013 07:55:59 -0300 Subject: [media] v4l2-ctrls: V4L2_CTRL_CLASS_FM_RX controls are also valid radio controls The radio filter function that filters controls that are valid for a radio device should also accept V4L2_CTRL_CLASS_FM_RX controls. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c index ebb8e48..fccd08b 100644 --- a/drivers/media/v4l2-core/v4l2-ctrls.c +++ b/drivers/media/v4l2-core/v4l2-ctrls.c @@ -1835,6 +1835,8 @@ bool v4l2_ctrl_radio_filter(const struct v4l2_ctrl *ctrl) { if (V4L2_CTRL_ID2CLASS(ctrl->id) == V4L2_CTRL_CLASS_FM_TX) return true; + if (V4L2_CTRL_ID2CLASS(ctrl->id) == V4L2_CTRL_CLASS_FM_RX) + return true; switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: case V4L2_CID_AUDIO_VOLUME: -- cgit v0.10.2 From 560dde24adfdc9dbcd141c75faecc5e0402fe531 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 3 Jun 2013 04:35:22 -0300 Subject: [media] v4l2-ioctl: don't print the clips list The clips pointer is a userspace pointer, not a kernelspace pointer, so you can't dereference the clips pointer. Also add a few missing commas and newlines. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c index f81bda1..7658586 100644 --- a/drivers/media/v4l2-core/v4l2-ioctl.c +++ b/drivers/media/v4l2-core/v4l2-ioctl.c @@ -243,7 +243,6 @@ static void v4l_print_format(const void *arg, bool write_only) const struct v4l2_vbi_format *vbi; const struct v4l2_sliced_vbi_format *sliced; const struct v4l2_window *win; - const struct v4l2_clip *clip; unsigned i; pr_cont("type=%s", prt_names(p->type, v4l2_type_names)); @@ -253,7 +252,7 @@ static void v4l_print_format(const void *arg, bool write_only) pix = &p->fmt.pix; pr_cont(", width=%u, height=%u, " "pixelformat=%c%c%c%c, field=%s, " - "bytesperline=%u sizeimage=%u, colorspace=%d\n", + "bytesperline=%u, sizeimage=%u, colorspace=%d\n", pix->width, pix->height, (pix->pixelformat & 0xff), (pix->pixelformat >> 8) & 0xff, @@ -284,20 +283,14 @@ static void v4l_print_format(const void *arg, bool write_only) case V4L2_BUF_TYPE_VIDEO_OVERLAY: case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: win = &p->fmt.win; - pr_cont(", wxh=%dx%d, x,y=%d,%d, field=%s, " - "chromakey=0x%08x, bitmap=%p, " - "global_alpha=0x%02x\n", - win->w.width, win->w.height, - win->w.left, win->w.top, + /* Note: we can't print the clip list here since the clips + * pointer is a userspace pointer, not a kernelspace + * pointer. */ + pr_cont(", wxh=%dx%d, x,y=%d,%d, field=%s, chromakey=0x%08x, clipcount=%u, clips=%p, bitmap=%p, global_alpha=0x%02x\n", + win->w.width, win->w.height, win->w.left, win->w.top, prt_names(win->field, v4l2_field_names), - win->chromakey, win->bitmap, win->global_alpha); - clip = win->clips; - for (i = 0; i < win->clipcount; i++) { - printk(KERN_DEBUG "clip %u: wxh=%dx%d, x,y=%d,%d\n", - i, clip->c.width, clip->c.height, - clip->c.left, clip->c.top); - clip = clip->next; - } + win->chromakey, win->clipcount, win->clips, + win->bitmap, win->global_alpha); break; case V4L2_BUF_TYPE_VBI_CAPTURE: case V4L2_BUF_TYPE_VBI_OUTPUT: @@ -332,7 +325,7 @@ static void v4l_print_framebuffer(const void *arg, bool write_only) pr_cont("capability=0x%x, flags=0x%x, base=0x%p, width=%u, " "height=%u, pixelformat=%c%c%c%c, " - "bytesperline=%u sizeimage=%u, colorspace=%d\n", + "bytesperline=%u, sizeimage=%u, colorspace=%d\n", p->capability, p->flags, p->base, p->fmt.width, p->fmt.height, (p->fmt.pixelformat & 0xff), @@ -353,7 +346,7 @@ static void v4l_print_modulator(const void *arg, bool write_only) const struct v4l2_modulator *p = arg; if (write_only) - pr_cont("index=%u, txsubchans=0x%x", p->index, p->txsubchans); + pr_cont("index=%u, txsubchans=0x%x\n", p->index, p->txsubchans); else pr_cont("index=%u, name=%.*s, capability=0x%x, " "rangelow=%u, rangehigh=%u, txsubchans=0x%x\n", @@ -445,13 +438,13 @@ static void v4l_print_buffer(const void *arg, bool write_only) for (i = 0; i < p->length; ++i) { plane = &p->m.planes[i]; printk(KERN_DEBUG - "plane %d: bytesused=%d, data_offset=0x%08x " + "plane %d: bytesused=%d, data_offset=0x%08x, " "offset/userptr=0x%lx, length=%d\n", i, plane->bytesused, plane->data_offset, plane->m.userptr, plane->length); } } else { - pr_cont("bytesused=%d, offset/userptr=0x%lx, length=%d\n", + pr_cont(", bytesused=%d, offset/userptr=0x%lx, length=%d\n", p->bytesused, p->m.userptr, p->length); } @@ -504,6 +497,8 @@ static void v4l_print_streamparm(const void *arg, bool write_only) c->capability, c->outputmode, c->timeperframe.numerator, c->timeperframe.denominator, c->extendedmode, c->writebuffers); + } else { + pr_cont("\n"); } } @@ -734,11 +729,11 @@ static void v4l_print_frmsizeenum(const void *arg, bool write_only) p->type); switch (p->type) { case V4L2_FRMSIZE_TYPE_DISCRETE: - pr_cont(" wxh=%ux%u\n", + pr_cont(", wxh=%ux%u\n", p->discrete.width, p->discrete.height); break; case V4L2_FRMSIZE_TYPE_STEPWISE: - pr_cont(" min=%ux%u, max=%ux%u, step=%ux%u\n", + pr_cont(", min=%ux%u, max=%ux%u, step=%ux%u\n", p->stepwise.min_width, p->stepwise.min_height, p->stepwise.step_width, p->stepwise.step_height, p->stepwise.max_width, p->stepwise.max_height); @@ -764,12 +759,12 @@ static void v4l_print_frmivalenum(const void *arg, bool write_only) p->width, p->height, p->type); switch (p->type) { case V4L2_FRMIVAL_TYPE_DISCRETE: - pr_cont(" fps=%d/%d\n", + pr_cont(", fps=%d/%d\n", p->discrete.numerator, p->discrete.denominator); break; case V4L2_FRMIVAL_TYPE_STEPWISE: - pr_cont(" min=%d/%d, max=%d/%d, step=%d/%d\n", + pr_cont(", min=%d/%d, max=%d/%d, step=%d/%d\n", p->stepwise.min.numerator, p->stepwise.min.denominator, p->stepwise.max.numerator, @@ -807,8 +802,8 @@ static void v4l_print_event(const void *arg, bool write_only) pr_cont("value64=%lld, ", c->value64); else pr_cont("value=%d, ", c->value); - pr_cont("flags=0x%x, minimum=%d, maximum=%d, step=%d," - " default_value=%d\n", + pr_cont("flags=0x%x, minimum=%d, maximum=%d, step=%d, " + "default_value=%d\n", c->flags, c->minimum, c->maximum, c->step, c->default_value); break; @@ -845,7 +840,7 @@ static void v4l_print_freq_band(const void *arg, bool write_only) const struct v4l2_frequency_band *p = arg; pr_cont("tuner=%u, type=%u, index=%u, capability=0x%x, " - "rangelow=%u, rangehigh=%u, modulation=0x%x\n", + "rangelow=%u, rangehigh=%u, modulation=0x%x\n", p->tuner, p->type, p->index, p->capability, p->rangelow, p->rangehigh, p->modulation); -- cgit v0.10.2 From 9166e1aae3c90720fc389815909cb0bb815d9bca Mon Sep 17 00:00:00 2001 From: Katsuya Matsubara Date: Tue, 23 Apr 2013 07:51:35 -0300 Subject: [media] sh_veu: invoke v4l2_m2m_job_finish() even if a job has been aborted v4l2_m2m_job_finish() should be invoked even if the current ongoing job has been aborted since v4l2_m2m_ctx_release() which has issued the job abort may wait until the finish function is invoked. Signed-off-by: Katsuya Matsubara Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/sh_veu.c b/drivers/media/platform/sh_veu.c index 0b32cc3..6fecf9f 100644 --- a/drivers/media/platform/sh_veu.c +++ b/drivers/media/platform/sh_veu.c @@ -1138,10 +1138,7 @@ static irqreturn_t sh_veu_isr(int irq, void *dev_id) veu->xaction++; - if (!veu->aborting) - return IRQ_WAKE_THREAD; - - return IRQ_HANDLED; + return IRQ_WAKE_THREAD; } static int sh_veu_probe(struct platform_device *pdev) -- cgit v0.10.2 From 6abb3cf2c34554590791b7486e0e32b291feacc4 Mon Sep 17 00:00:00 2001 From: Katsuya Matsubara Date: Tue, 23 Apr 2013 07:51:36 -0300 Subject: [media] sh_veu: keep power supply until the m2m context is released In the sh_veu driver, only the interrupt handler 'sh_veu_bh' can invoke the v4l2_m2m_job_finish() function. So the hardware must be alive for handling interrupts until returning from v4l2_m2m_ctx_release(). Signed-off-by: Katsuya Matsubara Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/sh_veu.c b/drivers/media/platform/sh_veu.c index 6fecf9f..ebf90bf 100644 --- a/drivers/media/platform/sh_veu.c +++ b/drivers/media/platform/sh_veu.c @@ -1033,8 +1033,6 @@ static int sh_veu_release(struct file *file) dev_dbg(veu->dev, "Releasing instance %p\n", veu_file); - pm_runtime_put(veu->dev); - if (veu_file == veu->capture) { veu->capture = NULL; vb2_queue_release(v4l2_m2m_get_vq(veu->m2m_ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE)); @@ -1050,6 +1048,8 @@ static int sh_veu_release(struct file *file) veu->m2m_ctx = NULL; } + pm_runtime_put(veu->dev); + kfree(veu_file); return 0; -- cgit v0.10.2 From 697a6d2387692c7f9c94f3bfb3dac474aa840f02 Mon Sep 17 00:00:00 2001 From: Katsuya Matsubara Date: Tue, 23 Apr 2013 07:51:37 -0300 Subject: [media] sh_veu: fix the buffer size calculation The 'bytesperline' value only indicates the stride of the Y plane if the color format is planar, such as NV12. When calculating the total plane size, the size of CbCr plane must also be considered. Signed-off-by: Katsuya Matsubara Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/sh_veu.c b/drivers/media/platform/sh_veu.c index ebf90bf..59a9dee 100644 --- a/drivers/media/platform/sh_veu.c +++ b/drivers/media/platform/sh_veu.c @@ -905,11 +905,11 @@ static int sh_veu_queue_setup(struct vb2_queue *vq, if (ftmp.fmt.pix.width != pix->width || ftmp.fmt.pix.height != pix->height) return -EINVAL; - size = pix->bytesperline ? pix->bytesperline * pix->height : - pix->width * pix->height * fmt->depth >> 3; + size = pix->bytesperline ? pix->bytesperline * pix->height * fmt->depth / fmt->ydepth : + pix->width * pix->height * fmt->depth / fmt->ydepth; } else { vfmt = sh_veu_get_vfmt(veu, vq->type); - size = vfmt->bytesperline * vfmt->frame.height; + size = vfmt->bytesperline * vfmt->frame.height * vfmt->fmt->depth / vfmt->fmt->ydepth; } if (count < 2) -- cgit v0.10.2 From af44ad5edd1eb6ca92ed5be48e0004e1f04bf219 Mon Sep 17 00:00:00 2001 From: Wenbing Wang Date: Wed, 5 Jun 2013 06:37:14 -0300 Subject: [media] soc_camera: error dev remove and v4l2 call in soc_camera_close(), if ici->ops->remove() removes device firstly, and then call __soc_camera_power_off(), it has logic error. Since if remove device, it should disable subdev clk. but in __soc_camera_ power_off(), it will callback v4l2 s_power function which will read/write subdev registers to control power by i2c. and then i2c read/write will fail because of clk disable. So suggest to re-sequence two functions call. Change-Id: Iee7a6d4fc7c7c1addb5d342621eb8dcd00fa2745 Signed-off-by: Wenbing Wang Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/soc_camera/soc_camera.c b/drivers/media/platform/soc_camera/soc_camera.c index eea832c..3a4efbd 100644 --- a/drivers/media/platform/soc_camera/soc_camera.c +++ b/drivers/media/platform/soc_camera/soc_camera.c @@ -643,9 +643,9 @@ static int soc_camera_close(struct file *file) if (ici->ops->init_videobuf2) vb2_queue_release(&icd->vb2_vidq); - ici->ops->remove(icd); - __soc_camera_power_off(icd); + + ici->ops->remove(icd); } if (icd->streamer == file) -- cgit v0.10.2 From 6c6cf64b16438eac6da9a90412a82316ad196e7c Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Mon, 10 Jun 2013 18:22:26 +0200 Subject: spi: s3c64xx: Fix pm_runtime_get_sync() return value check If the device is already in a runtime PM enabled state pm_runtime_get_sync() will return 1, so a test for negative value should be used to check for errors. Without this patch there are seen errors like: [ 8.540000] s3c64xx-spi 13930000.spi: Failed to enable device: 1 [ 8.545000] spi_master spi1: failed to prepare transfer hardware Likely because the driver uses synchronous API to runtime enable the device and asynchronous one to disable it. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 5000586..71cc3e6 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -444,7 +444,7 @@ static int s3c64xx_spi_prepare_transfer(struct spi_master *spi) } ret = pm_runtime_get_sync(&sdd->pdev->dev); - if (ret != 0) { + if (ret < 0) { dev_err(dev, "Failed to enable device: %d\n", ret); goto out_tx; } -- cgit v0.10.2 From 39b72d89eb2bf74ec94773defece6890febba7a5 Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Fri, 17 May 2013 11:25:52 +0530 Subject: clk: exynos5250: Update cpufreq related clocks for EXYNOS5250 cpufreq driver for EXYNOS5250 is not a platform driver, hence we cannot currently pass the clock names through a device tree node. Instead, we need to make them available through a global alias. cpufreq driver for EXYNOS5250 requires four clocks - 'armclk', 'mout_cpu', 'mout_mpll' and 'mout_apll'. 'armclk' has already been defined with an alias, 'mout_cpu', 'mout_mpll' and 'mout_apll' are now defined with an alias. Signed-off-by: Tushar Behera Signed-off-by: Mike Turquette diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c index 5c97e75..05d099d 100644 --- a/drivers/clk/samsung/clk-exynos5250.c +++ b/drivers/clk/samsung/clk-exynos5250.c @@ -208,10 +208,10 @@ struct samsung_fixed_factor_clock exynos5250_fixed_factor_clks[] __initdata = { }; struct samsung_mux_clock exynos5250_mux_clks[] __initdata = { - MUX(none, "mout_apll", mout_apll_p, SRC_CPU, 0, 1), - MUX(none, "mout_cpu", mout_cpu_p, SRC_CPU, 16, 1), + MUX_A(none, "mout_apll", mout_apll_p, SRC_CPU, 0, 1, "mout_apll"), + MUX_A(none, "mout_cpu", mout_cpu_p, SRC_CPU, 16, 1, "mout_cpu"), MUX(none, "mout_mpll_fout", mout_mpll_fout_p, PLL_DIV2_SEL, 4, 1), - MUX(none, "sclk_mpll", mout_mpll_p, SRC_CORE1, 8, 1), + MUX_A(none, "sclk_mpll", mout_mpll_p, SRC_CORE1, 8, 1, "mout_mpll"), MUX(none, "mout_bpll_fout", mout_bpll_fout_p, PLL_DIV2_SEL, 0, 1), MUX(none, "sclk_bpll", mout_bpll_p, SRC_CDREX, 0, 1), MUX(none, "mout_vpllsrc", mout_vpllsrc_p, SRC_TOP2, 0, 1), -- cgit v0.10.2 From 589c603b2c591ed470a731ceda589e6d60b77b5f Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Fri, 17 May 2013 11:25:53 +0530 Subject: clk: exynos5250: Add sclk_mpll to the parent list of mout_cpu clock 'mout_mpll' is added the list of parent clocks for 'mout_cpu'. 'mout_mpll' is an alias to the clock 'sclk_mpll'. Hence 'sclk_mpll' should be added to the list of parent clocks. This results in an error when cpufreq driver for EXYNOS5250 tries to set 'mout_mpll' as a parent for 'mout_cpu'. clk_set_parent: clk sclk_mpll can not be parent of clk mout_cpu Signed-off-by: Tushar Behera Signed-off-by: Mike Turquette diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c index 05d099d..b6d79c0 100644 --- a/drivers/clk/samsung/clk-exynos5250.c +++ b/drivers/clk/samsung/clk-exynos5250.c @@ -155,7 +155,7 @@ static __initdata unsigned long exynos5250_clk_regs[] = { /* list of all parent clock list */ PNAME(mout_apll_p) = { "fin_pll", "fout_apll", }; -PNAME(mout_cpu_p) = { "mout_apll", "mout_mpll", }; +PNAME(mout_cpu_p) = { "mout_apll", "sclk_mpll", }; PNAME(mout_mpll_fout_p) = { "fout_mplldiv2", "fout_mpll" }; PNAME(mout_mpll_p) = { "fin_pll", "mout_mpll_fout" }; PNAME(mout_bpll_fout_p) = { "fout_bplldiv2", "fout_bpll" }; -- cgit v0.10.2 From 150e5928d6063b273a80d9d6722417ac3c93ff82 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 10 Jun 2013 11:05:40 -0700 Subject: Input: add missing dependencies on CONFIG_HAS_IOMEM Several drivers don't build on s390 with CONFIG_PCI disabled as they require MMIO functions. Signed-off-by: Ben Hutchings Cc: stable@vger.kernel.org # 3.9 Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index ac05006..c62ca1b 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -431,6 +431,7 @@ config KEYBOARD_TEGRA config KEYBOARD_OPENCORES tristate "OpenCores Keyboard Controller" + depends on HAS_IOMEM help Say Y here if you want to use the OpenCores Keyboard Controller http://www.opencores.org/project,keyboardcontroller diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig index aebfe3e..1bda828 100644 --- a/drivers/input/serio/Kconfig +++ b/drivers/input/serio/Kconfig @@ -205,6 +205,7 @@ config SERIO_XILINX_XPS_PS2 config SERIO_ALTERA_PS2 tristate "Altera UP PS/2 controller" + depends on HAS_IOMEM help Say Y here if you have Altera University Program PS/2 ports. -- cgit v0.10.2 From 071ff9a36cb08b5a2b099fcdb45b63a61618f928 Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Tue, 11 Jun 2013 08:24:05 -0700 Subject: clk: samsung: Fix pll36xx_recalc_rate to handle kdiv properly The KDIV value is often listed as unsigned but it needs to be treated as a 16-bit signed value when using it in calculations. Fix our rate recalculation to do this correctly. Before doing this, I tried setting EPLL on exynos5250 to: rate, m, p, s, k = 80000000, 107, 2, 4, 43691 This rate is exactly from the table in the exynos5250 user manual. I read this back as 80750003 with: cat /sys/kernel/debug/clk/fin_pll/fout_epll/clk_rate After this patch, it reads back as 80000003 Signed-off-by: Doug Anderson Acked-by: Kukjin Kim Reviewed-by: Vikas Sajjan Signed-off-by: Mike Turquette diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c index 89135f6..362f12d 100644 --- a/drivers/clk/samsung/clk-pll.c +++ b/drivers/clk/samsung/clk-pll.c @@ -111,7 +111,8 @@ static unsigned long samsung_pll36xx_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct samsung_clk_pll36xx *pll = to_clk_pll36xx(hw); - u32 mdiv, pdiv, sdiv, kdiv, pll_con0, pll_con1; + u32 mdiv, pdiv, sdiv, pll_con0, pll_con1; + s16 kdiv; u64 fvco = parent_rate; pll_con0 = __raw_readl(pll->con_reg); @@ -119,7 +120,7 @@ static unsigned long samsung_pll36xx_recalc_rate(struct clk_hw *hw, mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK; pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK; sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK; - kdiv = pll_con1 & PLL36XX_KDIV_MASK; + kdiv = (s16)(pll_con1 & PLL36XX_KDIV_MASK); fvco *= (mdiv << 16) + kdiv; do_div(fvco, (pdiv << sdiv)); -- cgit v0.10.2 From d7880812b3594d3c6dcbe3cfd71dabb17347d082 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 10 Jun 2013 16:52:03 +0200 Subject: idle: Add the stack canary init to cpu_startup_entry() Moving x86 to the generic idle implementation (commit 7d1a9417 "x86: Use generic idle loop") wreckaged the stack protector. I stupidly missed that boot_init_stack_canary() must be inlined from a function which never returns, but I put that call into arch_cpu_idle_prepare() which of course returns. I pondered to play tricks with arch_cpu_idle_prepare() first, but then I noticed, that the other archs which have implemented the stackprotector (ARM and SH) do not initialize the canary for the non-boot cpus. So I decided to move the boot_init_stack_canary() call into cpu_startup_entry() ifdeffed with an CONFIG_X86 for now. This #ifdef is just a temporary measure as I don't want to inflict the boot_init_stack_canary() call on ARM and SH that late in the cycle. I'll queue a patch for 3.11 which removes the #ifdef if the ARM/SH maintainers have no objection. Reported-by: Wouter van Kesteren Cc: x86@kernel.org Cc: Russell King Cc: Paul Mundt Signed-off-by: Thomas Gleixner diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 4e7a37f..81a5f5e 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -277,18 +277,6 @@ void exit_idle(void) } #endif -void arch_cpu_idle_prepare(void) -{ - /* - * If we're the non-boot CPU, nothing set the stack canary up - * for us. CPU0 already has it initialized but no harm in - * doing it again. This is a good place for updating it, as - * we wont ever return from this function (so the invalid - * canaries already on the stack wont ever trigger). - */ - boot_init_stack_canary(); -} - void arch_cpu_idle_enter(void) { local_touch_nmi(); diff --git a/kernel/cpu/idle.c b/kernel/cpu/idle.c index d5585f5..bf2ee1a 100644 --- a/kernel/cpu/idle.c +++ b/kernel/cpu/idle.c @@ -5,6 +5,7 @@ #include #include #include +#include #include @@ -112,6 +113,21 @@ static void cpu_idle_loop(void) void cpu_startup_entry(enum cpuhp_state state) { + /* + * This #ifdef needs to die, but it's too late in the cycle to + * make this generic (arm and sh have never invoked the canary + * init for the non boot cpus!). Will be fixed in 3.11 + */ +#ifdef CONFIG_X86 + /* + * If we're the non-boot CPU, nothing set the stack canary up + * for us. The boot CPU already has it initialized but no harm + * in doing it again. This is a good place for updating it, as + * we wont ever return from this function (so the invalid + * canaries already on the stack wont ever trigger). + */ + boot_init_stack_canary(); +#endif current_set_polling(); arch_cpu_idle_prepare(); cpu_idle_loop(); -- cgit v0.10.2 From 0b63cc3ce11822ac96a334a345640f524212cd6b Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 4 Jun 2013 00:05:07 +0200 Subject: clk: spear: fix build error for spear3xx This patch is required to be able to disable spear320 support after the spear320_clk_init() prototype changed for the real function but not for the dummy. Signed-off-by: Arnd Bergmann Acked-by: Viresh Kumar Signed-off-by: Mike Turquette diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c index f9ec43f..080c3c5 100644 --- a/drivers/clk/spear/spear3xx_clock.c +++ b/drivers/clk/spear/spear3xx_clock.c @@ -369,7 +369,7 @@ static void __init spear320_clk_init(void __iomem *soc_config_base) clk_register_clkdev(clk, NULL, "60100000.serial"); } #else -static inline void spear320_clk_init(void) { } +static inline void spear320_clk_init(void __iomem *soc_config_base) { } #endif void __init spear3xx_clk_init(void __iomem *misc_base, void __iomem *soc_config_base) -- cgit v0.10.2 From 346f372f7b72a05bfa9b4e6d1b1e5de289a18d8a Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Thu, 6 Jun 2013 13:58:18 +0530 Subject: clk: exynos5250: Add CLK_IGNORE_UNUSED flag for pmu clock Currently 'pmu' clock is not handled by any of the drivers. Also before the introduction of CCF, this clock was not defined, hence was left enabled always. When this clock is disabled, software reset register becomes inaccessible and system reboot doesn't work. Upon restoring the default behaviour, system reboot starts working. Signed-off-by: Tushar Behera Signed-off-by: Mike Turquette diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c index b6d79c0..22d7699 100644 --- a/drivers/clk/samsung/clk-exynos5250.c +++ b/drivers/clk/samsung/clk-exynos5250.c @@ -378,7 +378,7 @@ struct samsung_gate_clock exynos5250_gate_clks[] __initdata = { GATE(hsi2c3, "hsi2c3", "aclk66", GATE_IP_PERIC, 31, 0, 0), GATE(chipid, "chipid", "aclk66", GATE_IP_PERIS, 0, 0, 0), GATE(sysreg, "sysreg", "aclk66", GATE_IP_PERIS, 1, 0, 0), - GATE(pmu, "pmu", "aclk66", GATE_IP_PERIS, 2, 0, 0), + GATE(pmu, "pmu", "aclk66", GATE_IP_PERIS, 2, CLK_IGNORE_UNUSED, 0), GATE(tzpc0, "tzpc0", "aclk66", GATE_IP_PERIS, 6, 0, 0), GATE(tzpc1, "tzpc1", "aclk66", GATE_IP_PERIS, 7, 0, 0), GATE(tzpc2, "tzpc2", "aclk66", GATE_IP_PERIS, 8, 0, 0), -- cgit v0.10.2 From 3813f5ca9ab7a00e80a17aab34f155453c66c78a Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Thu, 6 Jun 2013 12:41:17 -0400 Subject: drm/radeon: do not try to uselessly update virtual memory pagetable If a buffer is never bound to a virtual memory pagetable than don't try to unbind it. Only drawback is that we don't update the pagetable when unbinding the ib pool buffer which is fine because it only happens at suspend or module unload/shutdown. Fixes spurious messages about buffers without VM mappings. E.g.: radeon 0000:01:00.0: bo ffff88020afac400 don't has a mapping in vm ffff88021ca2b900 Cc: stable@kernel.org Signed-off-by: Jerome Glisse Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index 2c1341f..43ec4a4 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -1197,11 +1197,13 @@ int radeon_vm_bo_update_pte(struct radeon_device *rdev, int radeon_vm_bo_rmv(struct radeon_device *rdev, struct radeon_bo_va *bo_va) { - int r; + int r = 0; mutex_lock(&rdev->vm_manager.lock); mutex_lock(&bo_va->vm->mutex); - r = radeon_vm_bo_update_pte(rdev, bo_va->vm, bo_va->bo, NULL); + if (bo_va->soffset) { + r = radeon_vm_bo_update_pte(rdev, bo_va->vm, bo_va->bo, NULL); + } mutex_unlock(&rdev->vm_manager.lock); list_del(&bo_va->vm_list); mutex_unlock(&bo_va->vm->mutex); -- cgit v0.10.2 From 089920f21db0108fb105ecfd81de4c92d88f06d0 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Thu, 6 Jun 2013 17:51:21 -0400 Subject: drm/radeon: fix write back suspend regression with uvd v2 UVD ring can't use scratch thus it does need writeback buffer to keep a valid address or radeon_ring_backup will trigger a kernel fault. It's ok to not unpin the write back buffer on suspend as it leave in gtt and thus does not need eviction. v2: Fix the uvd case. Reported and tracked by Wojtek Signed-off-by: Jerome Glisse Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 1899738..b0dc0b6 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -244,16 +244,6 @@ void radeon_scratch_free(struct radeon_device *rdev, uint32_t reg) */ void radeon_wb_disable(struct radeon_device *rdev) { - int r; - - if (rdev->wb.wb_obj) { - r = radeon_bo_reserve(rdev->wb.wb_obj, false); - if (unlikely(r != 0)) - return; - radeon_bo_kunmap(rdev->wb.wb_obj); - radeon_bo_unpin(rdev->wb.wb_obj); - radeon_bo_unreserve(rdev->wb.wb_obj); - } rdev->wb.enabled = false; } @@ -269,6 +259,11 @@ void radeon_wb_fini(struct radeon_device *rdev) { radeon_wb_disable(rdev); if (rdev->wb.wb_obj) { + if (!radeon_bo_reserve(rdev->wb.wb_obj, false)) { + radeon_bo_kunmap(rdev->wb.wb_obj); + radeon_bo_unpin(rdev->wb.wb_obj); + radeon_bo_unreserve(rdev->wb.wb_obj); + } radeon_bo_unref(&rdev->wb.wb_obj); rdev->wb.wb = NULL; rdev->wb.wb_obj = NULL; @@ -295,26 +290,26 @@ int radeon_wb_init(struct radeon_device *rdev) dev_warn(rdev->dev, "(%d) create WB bo failed\n", r); return r; } - } - r = radeon_bo_reserve(rdev->wb.wb_obj, false); - if (unlikely(r != 0)) { - radeon_wb_fini(rdev); - return r; - } - r = radeon_bo_pin(rdev->wb.wb_obj, RADEON_GEM_DOMAIN_GTT, - &rdev->wb.gpu_addr); - if (r) { + r = radeon_bo_reserve(rdev->wb.wb_obj, false); + if (unlikely(r != 0)) { + radeon_wb_fini(rdev); + return r; + } + r = radeon_bo_pin(rdev->wb.wb_obj, RADEON_GEM_DOMAIN_GTT, + &rdev->wb.gpu_addr); + if (r) { + radeon_bo_unreserve(rdev->wb.wb_obj); + dev_warn(rdev->dev, "(%d) pin WB bo failed\n", r); + radeon_wb_fini(rdev); + return r; + } + r = radeon_bo_kmap(rdev->wb.wb_obj, (void **)&rdev->wb.wb); radeon_bo_unreserve(rdev->wb.wb_obj); - dev_warn(rdev->dev, "(%d) pin WB bo failed\n", r); - radeon_wb_fini(rdev); - return r; - } - r = radeon_bo_kmap(rdev->wb.wb_obj, (void **)&rdev->wb.wb); - radeon_bo_unreserve(rdev->wb.wb_obj); - if (r) { - dev_warn(rdev->dev, "(%d) map WB bo failed\n", r); - radeon_wb_fini(rdev); - return r; + if (r) { + dev_warn(rdev->dev, "(%d) map WB bo failed\n", r); + radeon_wb_fini(rdev); + return r; + } } /* clear wb memory */ diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c index 5b937df..ddb8f8e 100644 --- a/drivers/gpu/drm/radeon/radeon_fence.c +++ b/drivers/gpu/drm/radeon/radeon_fence.c @@ -63,7 +63,9 @@ static void radeon_fence_write(struct radeon_device *rdev, u32 seq, int ring) { struct radeon_fence_driver *drv = &rdev->fence_drv[ring]; if (likely(rdev->wb.enabled || !drv->scratch_reg)) { - *drv->cpu_addr = cpu_to_le32(seq); + if (drv->cpu_addr) { + *drv->cpu_addr = cpu_to_le32(seq); + } } else { WREG32(drv->scratch_reg, seq); } @@ -84,7 +86,11 @@ static u32 radeon_fence_read(struct radeon_device *rdev, int ring) u32 seq = 0; if (likely(rdev->wb.enabled || !drv->scratch_reg)) { - seq = le32_to_cpu(*drv->cpu_addr); + if (drv->cpu_addr) { + seq = le32_to_cpu(*drv->cpu_addr); + } else { + seq = lower_32_bits(atomic64_read(&drv->last_seq)); + } } else { seq = RREG32(drv->scratch_reg); } diff --git a/drivers/gpu/drm/radeon/radeon_uvd.c b/drivers/gpu/drm/radeon/radeon_uvd.c index 906e5c0..9f55ade 100644 --- a/drivers/gpu/drm/radeon/radeon_uvd.c +++ b/drivers/gpu/drm/radeon/radeon_uvd.c @@ -159,7 +159,17 @@ int radeon_uvd_suspend(struct radeon_device *rdev) if (!r) { radeon_bo_kunmap(rdev->uvd.vcpu_bo); radeon_bo_unpin(rdev->uvd.vcpu_bo); + rdev->uvd.cpu_addr = NULL; + if (!radeon_bo_pin(rdev->uvd.vcpu_bo, RADEON_GEM_DOMAIN_CPU, NULL)) { + radeon_bo_kmap(rdev->uvd.vcpu_bo, &rdev->uvd.cpu_addr); + } radeon_bo_unreserve(rdev->uvd.vcpu_bo); + + if (rdev->uvd.cpu_addr) { + radeon_fence_driver_start_ring(rdev, R600_RING_TYPE_UVD_INDEX); + } else { + rdev->fence_drv[R600_RING_TYPE_UVD_INDEX].cpu_addr = NULL; + } } return r; } @@ -178,6 +188,10 @@ int radeon_uvd_resume(struct radeon_device *rdev) return r; } + /* Have been pin in cpu unmap unpin */ + radeon_bo_kunmap(rdev->uvd.vcpu_bo); + radeon_bo_unpin(rdev->uvd.vcpu_bo); + r = radeon_bo_pin(rdev->uvd.vcpu_bo, RADEON_GEM_DOMAIN_VRAM, &rdev->uvd.gpu_addr); if (r) { -- cgit v0.10.2 From fe6510b5d6349a8999b83ef7c5671e5a561b803a Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Tue, 11 Jun 2013 22:25:22 +0300 Subject: crypto: aesni_intel - fix accessing of unaligned memory The new XTS code for aesni_intel uses input buffers directly as memory operands for pxor instructions, which causes crash if those buffers are not aligned to 16 bytes. Patch changes XTS code to handle unaligned memory correctly, by loading memory with movdqu instead. Reported-by: Dave Jones Tested-by: Dave Jones Signed-off-by: Jussi Kivilinna Signed-off-by: Herbert Xu diff --git a/arch/x86/crypto/aesni-intel_asm.S b/arch/x86/crypto/aesni-intel_asm.S index 62fe22c..477e9d7 100644 --- a/arch/x86/crypto/aesni-intel_asm.S +++ b/arch/x86/crypto/aesni-intel_asm.S @@ -2681,56 +2681,68 @@ ENTRY(aesni_xts_crypt8) addq %rcx, KEYP movdqa IV, STATE1 - pxor 0x00(INP), STATE1 + movdqu 0x00(INP), INC + pxor INC, STATE1 movdqu IV, 0x00(OUTP) _aesni_gf128mul_x_ble() movdqa IV, STATE2 - pxor 0x10(INP), STATE2 + movdqu 0x10(INP), INC + pxor INC, STATE2 movdqu IV, 0x10(OUTP) _aesni_gf128mul_x_ble() movdqa IV, STATE3 - pxor 0x20(INP), STATE3 + movdqu 0x20(INP), INC + pxor INC, STATE3 movdqu IV, 0x20(OUTP) _aesni_gf128mul_x_ble() movdqa IV, STATE4 - pxor 0x30(INP), STATE4 + movdqu 0x30(INP), INC + pxor INC, STATE4 movdqu IV, 0x30(OUTP) call *%r11 - pxor 0x00(OUTP), STATE1 + movdqu 0x00(OUTP), INC + pxor INC, STATE1 movdqu STATE1, 0x00(OUTP) _aesni_gf128mul_x_ble() movdqa IV, STATE1 - pxor 0x40(INP), STATE1 + movdqu 0x40(INP), INC + pxor INC, STATE1 movdqu IV, 0x40(OUTP) - pxor 0x10(OUTP), STATE2 + movdqu 0x10(OUTP), INC + pxor INC, STATE2 movdqu STATE2, 0x10(OUTP) _aesni_gf128mul_x_ble() movdqa IV, STATE2 - pxor 0x50(INP), STATE2 + movdqu 0x50(INP), INC + pxor INC, STATE2 movdqu IV, 0x50(OUTP) - pxor 0x20(OUTP), STATE3 + movdqu 0x20(OUTP), INC + pxor INC, STATE3 movdqu STATE3, 0x20(OUTP) _aesni_gf128mul_x_ble() movdqa IV, STATE3 - pxor 0x60(INP), STATE3 + movdqu 0x60(INP), INC + pxor INC, STATE3 movdqu IV, 0x60(OUTP) - pxor 0x30(OUTP), STATE4 + movdqu 0x30(OUTP), INC + pxor INC, STATE4 movdqu STATE4, 0x30(OUTP) _aesni_gf128mul_x_ble() movdqa IV, STATE4 - pxor 0x70(INP), STATE4 + movdqu 0x70(INP), INC + pxor INC, STATE4 movdqu IV, 0x70(OUTP) _aesni_gf128mul_x_ble() @@ -2738,16 +2750,20 @@ ENTRY(aesni_xts_crypt8) call *%r11 - pxor 0x40(OUTP), STATE1 + movdqu 0x40(OUTP), INC + pxor INC, STATE1 movdqu STATE1, 0x40(OUTP) - pxor 0x50(OUTP), STATE2 + movdqu 0x50(OUTP), INC + pxor INC, STATE2 movdqu STATE2, 0x50(OUTP) - pxor 0x60(OUTP), STATE3 + movdqu 0x60(OUTP), INC + pxor INC, STATE3 movdqu STATE3, 0x60(OUTP) - pxor 0x70(OUTP), STATE4 + movdqu 0x70(OUTP), INC + pxor INC, STATE4 movdqu STATE4, 0x70(OUTP) ret -- cgit v0.10.2 From 907985f48bc60818e291c631249f9bc84c83a06f Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Mon, 10 Jun 2013 15:18:00 -0400 Subject: slab: prevent warnings when allocating with __GFP_NOWARN Sasha Levin noticed that the warning introduced by commit 6286ae9 ("slab: Return NULL for oversized allocations) is being triggered: WARNING: CPU: 15 PID: 21519 at mm/slab_common.c:376 kmalloc_slab+0x2f/0xb0() can: request_module (can-proto-4) failed. mpoa: proc_mpc_write: could not parse '' Modules linked in: CPU: 15 PID: 21519 Comm: trinity-child15 Tainted: G W 3.10.0-rc4-next-20130607-sasha-00011-gcd78395-dirty #2 0000000000000009 ffff880020a95e30 ffffffff83ff4041 0000000000000000 ffff880020a95e68 ffffffff8111fe12 fffffffffffffff0 00000000000082d0 0000000000080000 0000000000080000 0000000001400000 ffff880020a95e78 Call Trace: [] dump_stack+0x4e/0x82 [] warn_slowpath_common+0x82/0xb0 [] warn_slowpath_null+0x15/0x20 [] kmalloc_slab+0x2f/0xb0 [] __kmalloc+0x24/0x4b0 [] ? security_capable+0x13/0x20 [] ? pipe_fcntl+0x107/0x210 [] pipe_fcntl+0x107/0x210 [] ? fget_raw_light+0x130/0x3f0 [] SyS_fcntl+0x60b/0x6a0 [] tracesys+0xe1/0xe6 Andrew Morton writes: __GFP_NOWARN is frequently used by kernel code to probe for "how big an allocation can I get". That's a bit lame, but it's used on slow paths and is pretty simple. However, SLAB would still spew a warning when a big allocation happens if the __GFP_NOWARN flag is _not_ set to expose kernel bugs. Signed-off-by: Sasha Levin [ penberg@kernel.org: improve changelog ] Signed-off-by: Pekka Enberg diff --git a/mm/slab_common.c b/mm/slab_common.c index ff3218a..2d41450 100644 --- a/mm/slab_common.c +++ b/mm/slab_common.c @@ -373,8 +373,10 @@ struct kmem_cache *kmalloc_slab(size_t size, gfp_t flags) { int index; - if (WARN_ON_ONCE(size > KMALLOC_MAX_SIZE)) + if (size > KMALLOC_MAX_SIZE) { + WARN_ON_ONCE(!(flags & __GFP_NOWARN)); return NULL; + } if (size <= 192) { if (!size) -- cgit v0.10.2 From 3a96d5cd7bdce45d5dded75c3a62d4fb98050280 Mon Sep 17 00:00:00 2001 From: Josh Durgin Date: Wed, 12 Jun 2013 19:15:06 -0700 Subject: rbd: use the correct length for format 2 object names Format 2 objects use 16 characters for the object name suffix to be able to express the full 64-bit range of object numbers. Format 1 images only use 12 characters for this. Using 12-character names for format 2 caused userspace and kernel rbd clients to read differently named objects, which made an image written by one client look empty to the other client. CC: stable@vger.kernel.org # 3.9+ Reported-by: Chris Dunlop Signed-off-by: Josh Durgin Reviewed-by: Sage Weil diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 3a897a5..cc7c60e 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -1038,12 +1038,16 @@ static const char *rbd_segment_name(struct rbd_device *rbd_dev, u64 offset) char *name; u64 segment; int ret; + char *name_format; name = kmem_cache_alloc(rbd_segment_name_cache, GFP_NOIO); if (!name) return NULL; segment = offset >> rbd_dev->header.obj_order; - ret = snprintf(name, MAX_OBJ_NAME_SIZE + 1, "%s.%012llx", + name_format = "%s.%012llx"; + if (rbd_dev->image_format == 2) + name_format = "%s.%016llx"; + ret = snprintf(name, MAX_OBJ_NAME_SIZE + 1, name_format, rbd_dev->header.object_prefix, segment); if (ret < 0 || ret > MAX_OBJ_NAME_SIZE) { pr_err("error formatting segment name for #%llu (%d)\n", -- cgit v0.10.2 From 574780fd5e6ec52bd43e0bdb777a19e4c4c6aa9c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rn=20Engel?= Date: Thu, 30 May 2013 16:36:51 -0400 Subject: target/iscsi: don't corrupt bh_count in iscsit_stop_time2retain_timer() Here is a fun one. Bug seems to have been introduced by commit 140854cb, almost two years ago. I have no idea why we only started seeing it now, but we did. Rough callgraph: core_tpg_set_initiator_node_queue_depth() `-> spin_lock_irqsave(&tpg->session_lock, flags); `-> lio_tpg_shutdown_session() `-> iscsit_stop_time2retain_timer() `-> spin_unlock_bh(&se_tpg->session_lock); `-> spin_lock_bh(&se_tpg->session_lock); `-> spin_unlock_irqrestore(&tpg->session_lock, flags); core_tpg_set_initiator_node_queue_depth() used to call spin_lock_bh(), but 140854cb changed that to spin_lock_irqsave(). However, lio_tpg_shutdown_session() still claims to be called with spin_lock_bh() held, as does iscsit_stop_time2retain_timer(): * Called with spin_lock_bh(&struct se_portal_group->session_lock) held Stale documentation is mostly annoying, but in this case the dropping the lock with the _bh variant is plain wrong. It is also wrong to drop locks two functions below the lock-holder, but I will ignore that bit for now. After some more locking and unlocking we eventually hit this backtrace: ------------[ cut here ]------------ WARNING: at kernel/softirq.c:159 local_bh_enable_ip+0xe8/0x100() Pid: 24645, comm: lio_helper.py Tainted: G O 3.6.11+ Call Trace: [] warn_slowpath_common+0x7f/0xc0 [] ? iscsit_inc_conn_usage_count+0x37/0x50 [iscsi_target_mod] [] warn_slowpath_null+0x1a/0x20 [] local_bh_enable_ip+0xe8/0x100 [] _raw_spin_unlock_bh+0x15/0x20 [] iscsit_inc_conn_usage_count+0x37/0x50 [iscsi_target_mod] [] iscsit_stop_session+0xfa/0x1c0 [iscsi_target_mod] [] lio_tpg_shutdown_session+0x7b/0x90 [iscsi_target_mod] [] core_tpg_set_initiator_node_queue_depth+0xe4/0x290 [target_core_mod] [] iscsit_tpg_set_initiator_node_queue_depth+0x12/0x20 [iscsi_target_mod] [] lio_target_nacl_store_cmdsn_depth+0xa9/0x180 [iscsi_target_mod] [] target_fabric_nacl_base_attr_store+0x39/0x40 [target_core_mod] [] configfs_write_file+0xbd/0x120 [] vfs_write+0xc6/0x180 [] sys_write+0x51/0x90 [] system_call_fastpath+0x16/0x1b ---[ end trace 3747632b9b164652 ]--- As a pure band-aid, this patch drops the _bh. Signed-off-by: Joern Engel Cc: stable Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/iscsi/iscsi_target_erl0.c b/drivers/target/iscsi/iscsi_target_erl0.c index 8e6298c..dcb199d 100644 --- a/drivers/target/iscsi/iscsi_target_erl0.c +++ b/drivers/target/iscsi/iscsi_target_erl0.c @@ -842,11 +842,11 @@ int iscsit_stop_time2retain_timer(struct iscsi_session *sess) return 0; sess->time2retain_timer_flags |= ISCSI_TF_STOP; - spin_unlock_bh(&se_tpg->session_lock); + spin_unlock(&se_tpg->session_lock); del_timer_sync(&sess->time2retain_timer); - spin_lock_bh(&se_tpg->session_lock); + spin_lock(&se_tpg->session_lock); sess->time2retain_timer_flags &= ~ISCSI_TF_RUNNING; pr_debug("Stopped Time2Retain Timer for SID: %u\n", sess->sid); -- cgit v0.10.2 From b5aff3d2747bea08b386edd070941a45611ffe51 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 5 Jun 2013 09:54:17 -0700 Subject: tcm_qla2xxx: Fix residual for underrun commands that fail Suppose an initiator sends a DATA IN command with an allocation length shorter than the FC transfer length -- we get a target message like TARGET_CORE[qla2xxx]: Expected Transfer Length: 256 does not match SCSI CDB Length: 0 for SAM Opcode: 0x12 In that case, the target core adjusts the data_length and sets se_cmd->residual_count for the underrun. But now suppose that command fails and we end up in tcm_qla2xxx_queue_status() -- that function unconditionally overwrites residual_count with the already adjusted data_length, and the initiator will burp with a message like qla2xxx [0000:00:06.0]-301d:0: Dropped frame(s) detected (0x100 of 0x100 bytes). Fix this by adding on to the existing underflow residual count instead. Signed-off-by: Roland Dreier Cc: Giridhar Malavali Cc: Chad Dupuis Cc: stable Signed-off-by: Nicholas Bellinger diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c index 7a3870f..66b0b26 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c @@ -688,8 +688,12 @@ static int tcm_qla2xxx_queue_status(struct se_cmd *se_cmd) * For FCP_READ with CHECK_CONDITION status, clear cmd->bufflen * for qla_tgt_xmit_response LLD code */ + if (se_cmd->se_cmd_flags & SCF_OVERFLOW_BIT) { + se_cmd->se_cmd_flags &= ~SCF_OVERFLOW_BIT; + se_cmd->residual_count = 0; + } se_cmd->se_cmd_flags |= SCF_UNDERFLOW_BIT; - se_cmd->residual_count = se_cmd->data_length; + se_cmd->residual_count += se_cmd->data_length; cmd->bufflen = 0; } -- cgit v0.10.2 From 29ce3785b22da47c49f4ef6e14b9014fa5dee261 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Wed, 8 May 2013 14:05:34 -0700 Subject: idle: Enable interrupts in the weak arch_cpu_idle() implementation PARISC bootup triggers the warning at kernel/cpu/idle.c:96. That's caused by the weak arch_cpu_idle() implementation, which is provided to avoid that architectures implement idle_poll over and over. The switchover to polling mode happens in the first call of the weak arch_cpu_idle() implementation, but that code fails to reenable interrupts and therefor triggers the warning. Fix this by enabling interrupts in the weak arch_cpu_idle() code. [ tglx: Made the changelog match the patch ] Signed-off-by: James Bottomley Reviewed-by: Srivatsa S. Bhat Link: http://lkml.kernel.org/r/1371236142.2726.43.camel@dabdike Signed-off-by: Thomas Gleixner diff --git a/kernel/cpu/idle.c b/kernel/cpu/idle.c index bf2ee1a..e695c0a 100644 --- a/kernel/cpu/idle.c +++ b/kernel/cpu/idle.c @@ -59,6 +59,7 @@ void __weak arch_cpu_idle_dead(void) { } void __weak arch_cpu_idle(void) { cpu_idle_force_poll = 1; + local_irq_enable(); } /* -- cgit v0.10.2 From c139b1ee4e36374af705660af6172d7477352792 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 7 Jun 2013 10:04:54 -0400 Subject: drm/radeon: fix UVD on big endian This fixes the kernel side so that the ring should come up and ring and IB tests should work. The userspace UVD drivers will also need big endian fixes. Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 0e53416..6948eb8 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -2687,6 +2687,9 @@ void r600_uvd_rbc_stop(struct radeon_device *rdev) int r600_uvd_init(struct radeon_device *rdev) { int i, j, r; + /* disable byte swapping */ + u32 lmi_swap_cntl = 0; + u32 mp_swap_cntl = 0; /* raise clocks while booting up the VCPU */ radeon_set_uvd_clocks(rdev, 53300, 40000); @@ -2711,9 +2714,13 @@ int r600_uvd_init(struct radeon_device *rdev) WREG32(UVD_LMI_CTRL, 0x40 | (1 << 8) | (1 << 13) | (1 << 21) | (1 << 9) | (1 << 20)); - /* disable byte swapping */ - WREG32(UVD_LMI_SWAP_CNTL, 0); - WREG32(UVD_MP_SWAP_CNTL, 0); +#ifdef __BIG_ENDIAN + /* swap (8 in 32) RB and IB */ + lmi_swap_cntl = 0xa; + mp_swap_cntl = 0; +#endif + WREG32(UVD_LMI_SWAP_CNTL, lmi_swap_cntl); + WREG32(UVD_MP_SWAP_CNTL, mp_swap_cntl); WREG32(UVD_MPC_SET_MUXA0, 0x40c2040); WREG32(UVD_MPC_SET_MUXA1, 0x0); diff --git a/drivers/gpu/drm/radeon/radeon_uvd.c b/drivers/gpu/drm/radeon/radeon_uvd.c index 9f55ade..cad735d 100644 --- a/drivers/gpu/drm/radeon/radeon_uvd.c +++ b/drivers/gpu/drm/radeon/radeon_uvd.c @@ -627,19 +627,19 @@ int radeon_uvd_get_create_msg(struct radeon_device *rdev, int ring, } /* stitch together an UVD create msg */ - msg[0] = 0x00000de4; - msg[1] = 0x00000000; - msg[2] = handle; - msg[3] = 0x00000000; - msg[4] = 0x00000000; - msg[5] = 0x00000000; - msg[6] = 0x00000000; - msg[7] = 0x00000780; - msg[8] = 0x00000440; - msg[9] = 0x00000000; - msg[10] = 0x01b37000; + msg[0] = cpu_to_le32(0x00000de4); + msg[1] = cpu_to_le32(0x00000000); + msg[2] = cpu_to_le32(handle); + msg[3] = cpu_to_le32(0x00000000); + msg[4] = cpu_to_le32(0x00000000); + msg[5] = cpu_to_le32(0x00000000); + msg[6] = cpu_to_le32(0x00000000); + msg[7] = cpu_to_le32(0x00000780); + msg[8] = cpu_to_le32(0x00000440); + msg[9] = cpu_to_le32(0x00000000); + msg[10] = cpu_to_le32(0x01b37000); for (i = 11; i < 1024; ++i) - msg[i] = 0x0; + msg[i] = cpu_to_le32(0x0); radeon_bo_kunmap(bo); radeon_bo_unreserve(bo); @@ -673,12 +673,12 @@ int radeon_uvd_get_destroy_msg(struct radeon_device *rdev, int ring, } /* stitch together an UVD destroy msg */ - msg[0] = 0x00000de4; - msg[1] = 0x00000002; - msg[2] = handle; - msg[3] = 0x00000000; + msg[0] = cpu_to_le32(0x00000de4); + msg[1] = cpu_to_le32(0x00000002); + msg[2] = cpu_to_le32(handle); + msg[3] = cpu_to_le32(0x00000000); for (i = 4; i < 1024; ++i) - msg[i] = 0x0; + msg[i] = cpu_to_le32(0x0); radeon_bo_kunmap(bo); radeon_bo_unreserve(bo); -- cgit v0.10.2 From 3cb3f839d306443f3d1e79b0bde1a2ad2c12b555 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Sat, 15 Jun 2013 16:47:47 -0400 Subject: tilepro: work around module link error with gcc 4.7 gcc 4.7.x is emitting calls to __ffsdi2 where previously it used to inline the appropriate ctz instructions. While this needs to be fixed in gcc, it's also easy to avoid having it cause build failures when building with those compilers by exporting __ffsdi2 to modules. Signed-off-by: Chris Metcalf Cc: stable@kernel.org diff --git a/arch/tile/lib/exports.c b/arch/tile/lib/exports.c index 4385cb6..a93b02a 100644 --- a/arch/tile/lib/exports.c +++ b/arch/tile/lib/exports.c @@ -84,4 +84,6 @@ uint64_t __ashrdi3(uint64_t, unsigned int); EXPORT_SYMBOL(__ashrdi3); uint64_t __ashldi3(uint64_t, unsigned int); EXPORT_SYMBOL(__ashldi3); +int __ffsdi2(uint64_t); +EXPORT_SYMBOL(__ffsdi2); #endif -- cgit v0.10.2 From 19b2dbde5732170a03bd82cc8bd442cf88d856f7 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 12 Jun 2013 10:15:12 +0100 Subject: drm/i915: Restore fences after resume and GPU resets MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Stéphane Marchesin found that fences for pinned objects (i.e. the scanout) were not being restored upon resume, leading to corruption on the display and reference counting issues. This is due to a bug in commit 312817a39f17dbb4de000165b5b724e3728cd91c [2.6.38] Author: Chris Wilson Date: Mon Nov 22 11:50:11 2010 +0000 drm/i915: Only save and restore fences for UMS that zapped the pinned fences even though they were in use. Fortuitously, whilst we forced a VT switch during suspend and resume, no fences were ever pinned at the time. However, we now can do switchless S3 transitions and so the old bug finally surfaces. Reported-by: Stéphane Marchesin Signed-off-by: Chris Wilson Cc: Daniel Vetter Cc: Stéphane Marchesin Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index b9d00dc..9669a0b 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1697,6 +1697,8 @@ struct drm_gem_object *i915_gem_prime_import(struct drm_device *dev, struct dma_buf *i915_gem_prime_export(struct drm_device *dev, struct drm_gem_object *gem_obj, int flags); +void i915_gem_restore_fences(struct drm_device *dev); + /* i915_gem_context.c */ void i915_gem_context_init(struct drm_device *dev); void i915_gem_context_fini(struct drm_device *dev); diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 970ad17..a069741 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2117,25 +2117,15 @@ static void i915_gem_reset_ring_lists(struct drm_i915_private *dev_priv, } } -static void i915_gem_reset_fences(struct drm_device *dev) +void i915_gem_restore_fences(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; int i; for (i = 0; i < dev_priv->num_fence_regs; i++) { struct drm_i915_fence_reg *reg = &dev_priv->fence_regs[i]; - - if (reg->obj) - i915_gem_object_fence_lost(reg->obj); - - i915_gem_write_fence(dev, i, NULL); - - reg->pin_count = 0; - reg->obj = NULL; - INIT_LIST_HEAD(®->lru_list); + i915_gem_write_fence(dev, i, reg->obj); } - - INIT_LIST_HEAD(&dev_priv->mm.fence_list); } void i915_gem_reset(struct drm_device *dev) @@ -2158,8 +2148,7 @@ void i915_gem_reset(struct drm_device *dev) obj->base.read_domains &= ~I915_GEM_GPU_DOMAINS; } - /* The fence registers are invalidated so clear them out */ - i915_gem_reset_fences(dev); + i915_gem_restore_fences(dev); } /** @@ -3865,8 +3854,6 @@ i915_gem_idle(struct drm_device *dev) if (!drm_core_check_feature(dev, DRIVER_MODESET)) i915_gem_evict_everything(dev); - i915_gem_reset_fences(dev); - /* Hack! Don't let anybody do execbuf while we don't control the chip. * We need to replace this with a semaphore, or something. * And not confound mm.suspended! @@ -4193,7 +4180,8 @@ i915_gem_load(struct drm_device *dev) dev_priv->num_fence_regs = 8; /* Initialize fence registers to zero */ - i915_gem_reset_fences(dev); + INIT_LIST_HEAD(&dev_priv->mm.fence_list); + i915_gem_restore_fences(dev); i915_gem_detect_bit_6_swizzle(dev); init_waitqueue_head(&dev_priv->pending_flip_queue); diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index 41f0fde..369b3d8 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -384,6 +384,7 @@ int i915_restore_state(struct drm_device *dev) mutex_lock(&dev->struct_mutex); + i915_gem_restore_fences(dev); i915_restore_display(dev); if (!drm_core_check_feature(dev, DRIVER_MODESET)) { -- cgit v0.10.2 From ff49fad1d9bf2c49f52817b04cde8e4412434637 Mon Sep 17 00:00:00 2001 From: Jay Agarwal Date: Wed, 12 Jun 2013 12:43:43 +0530 Subject: ARM: tegra30: clocks: Fix pciex clock registration Registering pciex as peripheral clock instead of fixed clock as tegra_perih_reset_assert(deassert) api of this clock api gives warning and ultimately does not succeed to assert(deassert) Signed-off-by: Jay Agarwal Acked-by: Stephen Warren Signed-off-by: Mike Turquette diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c index c6921f5..ba99e38 100644 --- a/drivers/clk/tegra/clk-tegra30.c +++ b/drivers/clk/tegra/clk-tegra30.c @@ -1598,6 +1598,12 @@ static void __init tegra30_periph_clk_init(void) clk_register_clkdev(clk, "afi", "tegra-pcie"); clks[afi] = clk; + /* pciex */ + clk = tegra_clk_register_periph_gate("pciex", "pll_e", 0, clk_base, 0, + 74, &periph_u_regs, periph_clk_enb_refcnt); + clk_register_clkdev(clk, "pciex", "tegra-pcie"); + clks[pciex] = clk; + /* kfuse */ clk = tegra_clk_register_periph_gate("kfuse", "clk_m", TEGRA_PERIPH_ON_APB, @@ -1716,11 +1722,6 @@ static void __init tegra30_fixed_clk_init(void) 1, 0, &cml_lock); clk_register_clkdev(clk, "cml1", NULL); clks[cml1] = clk; - - /* pciex */ - clk = clk_register_fixed_rate(NULL, "pciex", "pll_e", 0, 100000000); - clk_register_clkdev(clk, "pciex", NULL); - clks[pciex] = clk; } static void __init tegra30_osc_clk_init(void) -- cgit v0.10.2 From d81bf8cf549f7a6656a64924672a42c101d17026 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Tue, 11 Jun 2013 11:06:48 +0200 Subject: ALSA: hda - Headset mic support for three more machines They need these quirks to have headset mic support. BugLink: https://bugs.launchpad.net/bugs/1189363 Tested-by: Shawn Wang Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 02e22b4..af9e71b 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3483,6 +3483,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x05ca, "Dell", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05cb, "Dell", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05de, "Dell", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1028, 0x05e0, "Dell", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05e9, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05ea, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05eb, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), @@ -3494,6 +3495,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x05f5, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05f6, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05f8, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1028, 0x0606, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1028, 0x0608, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x0609, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x103c, 0x1586, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC2), SND_PCI_QUIRK(0x103c, 0x18e6, "HP", ALC269_FIXUP_HP_GPIO_LED), -- cgit v0.10.2 From 342cda29343a6272c630f94ed56810a76740251b Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Sat, 15 Jun 2013 11:21:09 +0200 Subject: ALSA: usb-audio: work around Android accessory firmware bug When the Android firmware enables the audio interfaces in accessory mode, it always declares in the control interface's baInterfaceNr array that interfaces 0 and 1 belong to the audio function. However, the accessory interface itself, if also enabled, already is at index 0 and shifts the actual audio interface numbers to 1 and 2, which prevents the PCM streaming interface from being seen by the host driver. To get the PCM interface interface to work, detect when the descriptors point to the (for this driver useless) accessory interface, and redirect to the correct one. Reported-by: Jeremy Rosen Tested-by: Jeremy Rosen Cc: Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai diff --git a/sound/usb/card.c b/sound/usb/card.c index 1a03317..64952e2 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -147,14 +147,32 @@ static int snd_usb_create_stream(struct snd_usb_audio *chip, int ctrlif, int int return -EINVAL; } + alts = &iface->altsetting[0]; + altsd = get_iface_desc(alts); + + /* + * Android with both accessory and audio interfaces enabled gets the + * interface numbers wrong. + */ + if ((chip->usb_id == USB_ID(0x18d1, 0x2d04) || + chip->usb_id == USB_ID(0x18d1, 0x2d05)) && + interface == 0 && + altsd->bInterfaceClass == USB_CLASS_VENDOR_SPEC && + altsd->bInterfaceSubClass == USB_SUBCLASS_VENDOR_SPEC) { + interface = 2; + iface = usb_ifnum_to_if(dev, interface); + if (!iface) + return -EINVAL; + alts = &iface->altsetting[0]; + altsd = get_iface_desc(alts); + } + if (usb_interface_claimed(iface)) { snd_printdd(KERN_INFO "%d:%d:%d: skipping, already claimed\n", dev->devnum, ctrlif, interface); return -EINVAL; } - alts = &iface->altsetting[0]; - altsd = get_iface_desc(alts); if ((altsd->bInterfaceClass == USB_CLASS_AUDIO || altsd->bInterfaceClass == USB_CLASS_VENDOR_SPEC) && altsd->bInterfaceSubClass == USB_SUBCLASS_MIDISTREAMING) { -- cgit v0.10.2 From 6ab982e8cf8e5760da407ccdc4abc815bea23179 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 17 Jun 2013 10:19:49 +0200 Subject: ALSA: hda - Fix pin configurations for MacBook Air 4,2 MacBook Air 4,2 requires the whole default pin configuration table to be overridden by the driver, as usual, as Apple's machines don't set up properly after boot. Otherwise mic won't work, and other ill effect may happen. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59381 Reported-and-tested-by: Peter John Hartman Cc: [v3.9+] Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c index bd8d46c..cccaf9c 100644 --- a/sound/pci/hda/patch_cirrus.c +++ b/sound/pci/hda/patch_cirrus.c @@ -58,6 +58,7 @@ enum { CS420X_GPIO_23, CS420X_MBP101, CS420X_MBP81, + CS420X_MBA42, CS420X_AUTO, /* aliases */ CS420X_IMAC27_122 = CS420X_GPIO_23, @@ -346,6 +347,7 @@ static const struct hda_model_fixup cs420x_models[] = { { .id = CS420X_APPLE, .name = "apple" }, { .id = CS420X_MBP101, .name = "mbp101" }, { .id = CS420X_MBP81, .name = "mbp81" }, + { .id = CS420X_MBA42, .name = "mba42" }, {} }; @@ -361,6 +363,7 @@ static const struct snd_pci_quirk cs420x_fixup_tbl[] = { SND_PCI_QUIRK(0x106b, 0x1c00, "MacBookPro 8,1", CS420X_MBP81), SND_PCI_QUIRK(0x106b, 0x2000, "iMac 12,2", CS420X_IMAC27_122), SND_PCI_QUIRK(0x106b, 0x2800, "MacBookPro 10,1", CS420X_MBP101), + SND_PCI_QUIRK(0x106b, 0x5b00, "MacBookAir 4,2", CS420X_MBA42), SND_PCI_QUIRK_VENDOR(0x106b, "Apple", CS420X_APPLE), {} /* terminator */ }; @@ -414,6 +417,20 @@ static const struct hda_pintbl mbp101_pincfgs[] = { {} /* terminator */ }; +static const struct hda_pintbl mba42_pincfgs[] = { + { 0x09, 0x012b4030 }, /* HP */ + { 0x0a, 0x400000f0 }, + { 0x0b, 0x90100120 }, /* speaker */ + { 0x0c, 0x400000f0 }, + { 0x0d, 0x90a00110 }, /* mic */ + { 0x0e, 0x400000f0 }, + { 0x0f, 0x400000f0 }, + { 0x10, 0x400000f0 }, + { 0x12, 0x400000f0 }, + { 0x15, 0x400000f0 }, + {} /* terminator */ +}; + static void cs420x_fixup_gpio_13(struct hda_codec *codec, const struct hda_fixup *fix, int action) { @@ -482,6 +499,12 @@ static const struct hda_fixup cs420x_fixups[] = { .chained = true, .chain_id = CS420X_GPIO_13, }, + [CS420X_MBA42] = { + .type = HDA_FIXUP_PINS, + .v.pins = mba42_pincfgs, + .chained = true, + .chain_id = CS420X_GPIO_13, + }, }; static struct cs_spec *cs_alloc_spec(struct hda_codec *codec, int vendor_nid) -- cgit v0.10.2 From 36691e1be6ec551eef4a5225f126a281f8c051c2 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 17 Jun 2013 10:25:02 +0200 Subject: ALSA: usb-audio: Fix invalid volume resolution for Logitech HD Webcam c310 Just like the previous fix for LogitechHD Webcam c270 in commit 11e7064f35bb87da8f427d1aa4bbd8b7473a3993, c310 model also requires the same workaround for avoiding the kernel warning. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59741 Cc: Signed-off-by: Takashi Iwai diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index e5c7f9f..d543808 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -885,6 +885,7 @@ static void volume_control_quirks(struct usb_mixer_elem_info *cval, case USB_ID(0x046d, 0x0808): case USB_ID(0x046d, 0x0809): + case USB_ID(0x046d, 0x081b): /* HD Webcam c310 */ case USB_ID(0x046d, 0x081d): /* HD Webcam c510 */ case USB_ID(0x046d, 0x0825): /* HD Webcam c270 */ case USB_ID(0x046d, 0x0991): -- cgit v0.10.2 From e32aa85ab49203104019025eba83f03f88a3a0e3 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Mon, 17 Jun 2013 11:04:02 +0200 Subject: ALSA: hda - Add models for Dell headset jacks These headset jacks keep coming in on more and more platforms, and it's possible I don't catch them all. Make it easier to test and verify by making models. Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index bb8b0dc..77d68e2 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -29,6 +29,8 @@ ALC269/270/275/276/280/282 alc271-dmic Enable ALC271X digital mic workaround inv-dmic Inverted internal mic workaround lenovo-dock Enables docking station I/O for some Lenovos + dell-headset-multi Headset jack, which can also be used as mic-in + dell-headset-dock Headset jack (without mic-in), and also dock I/O ALC662/663/272 ============== @@ -42,6 +44,7 @@ ALC662/663/272 asus-mode7 ASUS asus-mode8 ASUS inv-dmic Inverted internal mic workaround + dell-headset-multi Headset jack, which can also be used as mic-in ALC680 ====== diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index af9e71b..403010c 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3599,6 +3599,8 @@ static const struct hda_model_fixup alc269_fixup_models[] = { {.id = ALC269_FIXUP_INV_DMIC, .name = "inv-dmic"}, {.id = ALC269_FIXUP_LENOVO_DOCK, .name = "lenovo-dock"}, {.id = ALC269_FIXUP_HP_GPIO_LED, .name = "hp-gpio-led"}, + {.id = ALC269_FIXUP_DELL1_MIC_NO_PRESENCE, .name = "dell-headset-multi"}, + {.id = ALC269_FIXUP_DELL2_MIC_NO_PRESENCE, .name = "dell-headset-dock"}, {} }; @@ -4278,6 +4280,7 @@ static const struct hda_model_fixup alc662_fixup_models[] = { {.id = ALC662_FIXUP_ASUS_MODE7, .name = "asus-mode7"}, {.id = ALC662_FIXUP_ASUS_MODE8, .name = "asus-mode8"}, {.id = ALC662_FIXUP_INV_DMIC, .name = "inv-dmic"}, + {.id = ALC668_FIXUP_DELL_MIC_NO_PRESENCE, .name = "dell-headset-multi"}, {} }; -- cgit v0.10.2 From 691557941af4c12bd307ad81a4d9fa9c7743ac28 Mon Sep 17 00:00:00 2001 From: Jon Medhurst Date: Fri, 7 Jun 2013 10:35:35 +0100 Subject: ARM: 7752/1: errata: LoUIS bit field in CLIDR register is incorrect On Cortex-A9 before version r1p0, the LoUIS bit field of the CLIDR register returns zero when it should return one. This leads to cache maintenance operations which rely on this value to not function as intended, causing data corruption. The workaround for this errata is to detect affected CPUs and correct the LoUIS value read. Acked-by: Will Deacon Acked-by: Nicolas Pitre Cc: stable@vger.kernel.org Signed-off-by: Jon Medhurst Signed-off-by: Russell King diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 49d993c..239fa96 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1189,6 +1189,16 @@ config PL310_ERRATA_588369 is not correctly implemented in PL310 as clean lines are not invalidated as a result of these operations. +config ARM_ERRATA_643719 + bool "ARM errata: LoUIS bit field in CLIDR register is incorrect" + depends on CPU_V7 && SMP + help + This option enables the workaround for the 643719 Cortex-A9 (prior to + r1p0) erratum. On affected cores the LoUIS bit field of the CLIDR + register returns zero when it should return one. The workaround + corrects this value, ensuring cache maintenance operations which use + it behave as intended and avoiding data corruption. + config ARM_ERRATA_720789 bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID" depends on CPU_V7 diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 15451ee..515b000 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -92,6 +92,14 @@ ENTRY(v7_flush_dcache_louis) mrc p15, 1, r0, c0, c0, 1 @ read clidr, r0 = clidr ALT_SMP(ands r3, r0, #(7 << 21)) @ extract LoUIS from clidr ALT_UP(ands r3, r0, #(7 << 27)) @ extract LoUU from clidr +#ifdef CONFIG_ARM_ERRATA_643719 + ALT_SMP(mrceq p15, 0, r2, c0, c0, 0) @ read main ID register + ALT_UP(moveq pc, lr) @ LoUU is zero, so nothing to do + ldreq r1, =0x410fc090 @ ID of ARM Cortex A9 r0p? + biceq r2, r2, #0x0000000f @ clear minor revision number + teqeq r2, r1 @ test for errata affected core and if so... + orreqs r3, #(1 << 21) @ fix LoUIS value (and set flags state to 'ne') +#endif ALT_SMP(mov r3, r3, lsr #20) @ r3 = LoUIS * 2 ALT_UP(mov r3, r3, lsr #26) @ r3 = LoUU * 2 moveq pc, lr @ return if level == 0 -- cgit v0.10.2 From 37468b30a3948bbbdf9d664678f611510d987e65 Mon Sep 17 00:00:00 2001 From: Po-Yu Chuang Date: Fri, 7 Jun 2013 12:15:45 +0100 Subject: ARM: 7753/1: map_init_section flushes incorrect pmd This bug was introduced in commit e651eab0. Some v4/v5 platforms failed to boot due to this. Signed-off-by: Po-Yu Chuang Signed-off-by: Russell King diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index e0d8565..4d409e6 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -616,10 +616,12 @@ static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr, } while (pte++, addr += PAGE_SIZE, addr != end); } -static void __init map_init_section(pmd_t *pmd, unsigned long addr, +static void __init __map_init_section(pmd_t *pmd, unsigned long addr, unsigned long end, phys_addr_t phys, const struct mem_type *type) { + pmd_t *p = pmd; + #ifndef CONFIG_ARM_LPAE /* * In classic MMU format, puds and pmds are folded in to @@ -638,7 +640,7 @@ static void __init map_init_section(pmd_t *pmd, unsigned long addr, phys += SECTION_SIZE; } while (pmd++, addr += SECTION_SIZE, addr != end); - flush_pmd_entry(pmd); + flush_pmd_entry(p); } static void __init alloc_init_pmd(pud_t *pud, unsigned long addr, @@ -661,7 +663,7 @@ static void __init alloc_init_pmd(pud_t *pud, unsigned long addr, */ if (type->prot_sect && ((addr | next | phys) & ~SECTION_MASK) == 0) { - map_init_section(pmd, addr, next, phys, type); + __map_init_section(pmd, addr, next, phys, type); } else { alloc_init_pte(pmd, addr, next, __phys_to_pfn(phys), type); -- cgit v0.10.2 From 049be07053ebbf0ee8543caea23ae7bdf0765bb2 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Mon, 10 Jun 2013 18:05:51 +0100 Subject: ARM: 7754/1: Fix the CPU ID and the mask associated to the PJ4B This commit fixes the ID and mask for the PJ4B which was too restrictive and didn't match the CPU of the Armada 370 SoC. Signed-off-by: Gregory CLEMENT Reviewed-by: Will Deacon Cc: Signed-off-by: Russell King diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 2c73a73..4c8c9c1 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -409,8 +409,8 @@ __v7_ca9mp_proc_info: */ .type __v7_pj4b_proc_info, #object __v7_pj4b_proc_info: - .long 0x562f5840 - .long 0xfffffff0 + .long 0x560f5800 + .long 0xff0fff00 __v7_proc __v7_pj4b_setup .size __v7_pj4b_proc_info, . - __v7_pj4b_proc_info -- cgit v0.10.2 From 1bc39742aab09248169ef9d3727c9def3528b3f3 Mon Sep 17 00:00:00 2001 From: Simon Baatz Date: Mon, 10 Jun 2013 21:10:12 +0100 Subject: ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page Commit f8b63c1 made flush_kernel_dcache_page a no-op assuming that the pages it needs to handle are kernel mapped only. However, for example when doing direct I/O, pages with user space mappings may occur. Thus, continue to do lazy flushing if there are no user space mappings. Otherwise, flush the kernel cache lines directly. Signed-off-by: Simon Baatz Reviewed-by: Catalin Marinas Cc: # 3.2+ Signed-off-by: Russell King diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index bff7138..17d0ae8 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -320,9 +320,7 @@ static inline void flush_anon_page(struct vm_area_struct *vma, } #define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE -static inline void flush_kernel_dcache_page(struct page *page) -{ -} +extern void flush_kernel_dcache_page(struct page *); #define flush_dcache_mmap_lock(mapping) \ spin_lock_irq(&(mapping)->tree_lock) diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 0d473cc..32aa586 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -301,6 +301,39 @@ void flush_dcache_page(struct page *page) EXPORT_SYMBOL(flush_dcache_page); /* + * Ensure cache coherency for the kernel mapping of this page. We can + * assume that the page is pinned via kmap. + * + * If the page only exists in the page cache and there are no user + * space mappings, this is a no-op since the page was already marked + * dirty at creation. Otherwise, we need to flush the dirty kernel + * cache lines directly. + */ +void flush_kernel_dcache_page(struct page *page) +{ + if (cache_is_vivt() || cache_is_vipt_aliasing()) { + struct address_space *mapping; + + mapping = page_mapping(page); + + if (!mapping || mapping_mapped(mapping)) { + void *addr; + + addr = page_address(page); + /* + * kmap_atomic() doesn't set the page virtual + * address for highmem pages, and + * kunmap_atomic() takes care of cache + * flushing already. + */ + if (!IS_ENABLED(CONFIG_HIGHMEM) || addr) + __cpuc_flush_dcache_area(addr, PAGE_SIZE); + } + } +} +EXPORT_SYMBOL(flush_kernel_dcache_page); + +/* * Flush an anonymous page so that users of get_user_pages() * can safely access the data. The expected sequence is: * -- cgit v0.10.2 From 69f91ff8c93c778cb65b71d9b2d95ff62956354f Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 12 Jun 2013 10:56:43 +0100 Subject: ARM: 7756/1: zImage/virt: remove hyp-stub.S during distclean Make sure hyp-stub.S gets removed during make distclean, this left over file was introduced in commit: 424e599 ARM: zImage/virt: hyp mode entry support for the zImage loader Signed-off-by: Magnus Damm Acked-by: Dave Martin Reviewed-by: Simon Horman Signed-off-by: Russell King diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 79e9bdb..120b83b 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -116,7 +116,8 @@ targets := vmlinux vmlinux.lds \ # Make sure files are removed during clean extra-y += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern \ - lib1funcs.S ashldi3.S $(libfdt) $(libfdt_hdrs) + lib1funcs.S ashldi3.S $(libfdt) $(libfdt_hdrs) \ + hyp-stub.S ifeq ($(CONFIG_FUNCTION_TRACER),y) ORIG_CFLAGS := $(KBUILD_CFLAGS) -- cgit v0.10.2 From 0abb6aeacc20822cd7baee82fd3b61169ca3f32e Mon Sep 17 00:00:00 2001 From: Padmavathi Venna Date: Wed, 12 Jun 2013 13:53:44 +0530 Subject: ARM: dts: Correct the base address of pinctrl_3 on Exynos5250 This patch corrects the base address of pinctrl_3 on Exynos5250 platform. Signed-off-by: Padmavathi Venna Acked-by: Kukjin Kim Signed-off-by: Olof Johansson diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi index d1650fb..ded558b 100644 --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -763,7 +763,7 @@ }; }; - pinctrl@03680000 { + pinctrl@03860000 { gpz: gpz { gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 0673524..fc9fb3d 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -161,9 +161,9 @@ interrupts = <0 50 0>; }; - pinctrl_3: pinctrl@03680000 { + pinctrl_3: pinctrl@03860000 { compatible = "samsung,exynos5250-pinctrl"; - reg = <0x0368000 0x1000>; + reg = <0x03860000 0x1000>; interrupts = <0 47 0>; }; -- cgit v0.10.2 From a908eb9936ba06678720226feed891d01827066f Mon Sep 17 00:00:00 2001 From: Gianluca Gennari Date: Sun, 2 Jun 2013 17:24:24 -0300 Subject: [media] rtl28xxu: fix buffer overflow when probing Rafael Micro r820t tuner As suggested by Antti, this patch replaces: https://patchwork.kernel.org/patch/2649861/ The buffer overflow is fixed by reading only the r820t ID register. Signed-off-by: Gianluca Gennari Acked-by: Antti Palosaari Reviewed-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c index 22015fe..2cc8ec7 100644 --- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c +++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c @@ -376,7 +376,7 @@ static int rtl2832u_read_config(struct dvb_usb_device *d) struct rtl28xxu_req req_mxl5007t = {0xd9c0, CMD_I2C_RD, 1, buf}; struct rtl28xxu_req req_e4000 = {0x02c8, CMD_I2C_RD, 1, buf}; struct rtl28xxu_req req_tda18272 = {0x00c0, CMD_I2C_RD, 2, buf}; - struct rtl28xxu_req req_r820t = {0x0034, CMD_I2C_RD, 5, buf}; + struct rtl28xxu_req req_r820t = {0x0034, CMD_I2C_RD, 1, buf}; dev_dbg(&d->udev->dev, "%s:\n", __func__); @@ -481,9 +481,9 @@ static int rtl2832u_read_config(struct dvb_usb_device *d) goto found; } - /* check R820T by reading tuner stats at I2C addr 0x1a */ + /* check R820T ID register; reg=00 val=69 */ ret = rtl28xxu_ctrl_msg(d, &req_r820t); - if (ret == 0) { + if (ret == 0 && buf[0] == 0x69) { priv->tuner = TUNER_RTL2832_R820T; priv->tuner_name = "R820T"; goto found; -- cgit v0.10.2 From ef223fb3d1d61c2a95a89cdc02f8e86dac96ddc3 Mon Sep 17 00:00:00 2001 From: Ross Lagerwall Date: Fri, 14 Jun 2013 23:24:25 +0100 Subject: tty/vt: Return EBUSY if deallocating VT1 and it is busy Commit 421b40a6286e ("tty/vt: Fix vc_deallocate() lock order") changed the behavior when deallocating VT 1. Previously if trying to deallocate VT1 and it is busy, we would return EBUSY. The commit changed this to return 0 (success). This commit restores the old behavior. Signed-off-by: Ross Lagerwall Tested-by: Mikael Pettersson Acked-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index fc2c06c..2bd78e2 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -289,13 +289,10 @@ static int vt_disallocate(unsigned int vc_num) struct vc_data *vc = NULL; int ret = 0; - if (!vc_num) - return 0; - console_lock(); if (VT_BUSY(vc_num)) ret = -EBUSY; - else + else if (vc_num) vc = vc_deallocate(vc_num); console_unlock(); -- cgit v0.10.2 From 7c61c3d8f44d5d822f758754287af644307b4af9 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Thu, 13 Jun 2013 15:56:37 -0400 Subject: tty: Fix transient pty write() EIO Commit 699390354da6c258b65bf8fa79cfd5feaede50b6 ('pty: Ignore slave pty close() if never successfully opened') introduced a bug with ptys whereby a write() in parallel with an open() on an existing pty could mistakenly indicate an I/O error. Only indicate an I/O error if the condition on open() actually exists. Reported-by: Markus Trippelsdorf Signed-off-by: Peter Hurley Tested-by: Mikael Pettersson Cc: stable # 3.9 Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index 59bfaec..abfd990 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -244,14 +244,9 @@ static void pty_flush_buffer(struct tty_struct *tty) static int pty_open(struct tty_struct *tty, struct file *filp) { - int retval = -ENODEV; - if (!tty || !tty->link) - goto out; - - set_bit(TTY_IO_ERROR, &tty->flags); + return -ENODEV; - retval = -EIO; if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) goto out; if (test_bit(TTY_PTY_LOCK, &tty->link->flags)) @@ -262,9 +257,11 @@ static int pty_open(struct tty_struct *tty, struct file *filp) clear_bit(TTY_IO_ERROR, &tty->flags); clear_bit(TTY_OTHER_CLOSED, &tty->link->flags); set_bit(TTY_THROTTLED, &tty->flags); - retval = 0; + return 0; + out: - return retval; + set_bit(TTY_IO_ERROR, &tty->flags); + return -EIO; } static void pty_set_termios(struct tty_struct *tty, -- cgit v0.10.2 From 19ab428f4b7988ef3ac727c680efc193ef53ce14 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 14 Jun 2013 16:14:14 +0100 Subject: ARM: 7759/1: decouple CPU offlining from reboot/shutdown Add comments to machine_shutdown()/halt()/power_off()/restart() that describe their purpose and/or requirements re: CPUs being active/not. In machine_shutdown(), replace the call to smp_send_stop() with a call to disable_nonboot_cpus(). This completely disables all but one CPU, thus satisfying the requirement that only a single CPU be active for kexec. Adjust Kconfig dependencies for this change. In machine_halt()/power_off()/restart(), call smp_send_stop() directly, rather than via machine_shutdown(); these functions don't need to completely de-activate all CPUs using hotplug, but rather just quiesce them. Remove smp_kill_cpus(), and its call from smp_send_stop(). smp_kill_cpus() was indirectly calling smp_ops.cpu_kill() without calling smp_ops.cpu_die() on the target CPUs first. At least some implementations of smp_ops had issues with this; it caused cpu_kill() to hang on Tegra, for example. Since smp_send_stop() is only used for shutdown, halt, and power-off, there is no need to attempt any kind of CPU hotplug here. Adjust Kconfig to reflect that machine_shutdown() (and hence kexec) relies upon disable_nonboot_cpus(). However, this alone doesn't guarantee that hotplug will work, or even that hotplug is implemented for a particular piece of HW that a multi-platform zImage runs on. Hence, add error-checking to machine_kexec() to determine whether it did work. Suggested-by: Russell King Signed-off-by: Stephen Warren Acked-by: Will Deacon Tested-by: Zhangfei Gao Signed-off-by: Russell King diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 239fa96..2651b1d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -2016,7 +2016,7 @@ config XIP_PHYS_ADDR config KEXEC bool "Kexec system call (EXPERIMENTAL)" - depends on (!SMP || HOTPLUG_CPU) + depends on (!SMP || PM_SLEEP_SMP) help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index 8ef8c93..4fb074c 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -134,6 +134,10 @@ void machine_kexec(struct kimage *image) unsigned long reboot_code_buffer_phys; void *reboot_code_buffer; + if (num_online_cpus() > 1) { + pr_err("kexec: error: multiple CPUs still online\n"); + return; + } page_list = image->head & PAGE_MASK; diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 282de48..6e8931c 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -184,30 +184,61 @@ int __init reboot_setup(char *str) __setup("reboot=", reboot_setup); +/* + * Called by kexec, immediately prior to machine_kexec(). + * + * This must completely disable all secondary CPUs; simply causing those CPUs + * to execute e.g. a RAM-based pin loop is not sufficient. This allows the + * kexec'd kernel to use any and all RAM as it sees fit, without having to + * avoid any code or data used by any SW CPU pin loop. The CPU hotplug + * functionality embodied in disable_nonboot_cpus() to achieve this. + */ void machine_shutdown(void) { -#ifdef CONFIG_SMP - smp_send_stop(); -#endif + disable_nonboot_cpus(); } +/* + * Halting simply requires that the secondary CPUs stop performing any + * activity (executing tasks, handling interrupts). smp_send_stop() + * achieves this. + */ void machine_halt(void) { - machine_shutdown(); + smp_send_stop(); + local_irq_disable(); while (1); } +/* + * Power-off simply requires that the secondary CPUs stop performing any + * activity (executing tasks, handling interrupts). smp_send_stop() + * achieves this. When the system power is turned off, it will take all CPUs + * with it. + */ void machine_power_off(void) { - machine_shutdown(); + smp_send_stop(); + if (pm_power_off) pm_power_off(); } +/* + * Restart requires that the secondary CPUs stop performing any activity + * while the primary CPU resets the system. Systems with a single CPU can + * use soft_restart() as their machine descriptor's .restart hook, since that + * will cause the only available CPU to reset. Systems with multiple CPUs must + * provide a HW restart implementation, to ensure that all CPUs reset at once. + * This is required so that any code running after reset on the primary CPU + * doesn't have to co-ordinate with other CPUs to ensure they aren't still + * executing pre-reset code, and using RAM that the primary CPU's code wishes + * to use. Implementing such co-ordination would be essentially impossible. + */ void machine_restart(char *cmd) { - machine_shutdown(); + smp_send_stop(); arm_pm_restart(reboot_mode, cmd); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 550d63c..5919eb4 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -651,17 +651,6 @@ void smp_send_reschedule(int cpu) smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE); } -#ifdef CONFIG_HOTPLUG_CPU -static void smp_kill_cpus(cpumask_t *mask) -{ - unsigned int cpu; - for_each_cpu(cpu, mask) - platform_cpu_kill(cpu); -} -#else -static void smp_kill_cpus(cpumask_t *mask) { } -#endif - void smp_send_stop(void) { unsigned long timeout; @@ -679,8 +668,6 @@ void smp_send_stop(void) if (num_online_cpus() > 1) pr_warning("SMP: failed to stop secondary CPUs\n"); - - smp_kill_cpus(&mask); } /* -- cgit v0.10.2 From f75773103d24faaa75323597c2804edfb4a48a52 Mon Sep 17 00:00:00 2001 From: David Daney Date: Sun, 16 Jun 2013 13:06:28 -0700 Subject: [IA64] Fix include dependency in asm/irqflags.h asm/kregs.h isn't always included first, so we need an explicit include. [Fix build breakage introduced by f21afc25f9ed45b8ffe200d0f071b0caec3ed2ef smp.h: Use local_irq_{save,restore}() in !SMP version of on_each_cpu().] Signed-off-by: David Daney Acked-by: Geert Uytterhoeven Signed-off-by: Tony Luck diff --git a/arch/ia64/include/asm/irqflags.h b/arch/ia64/include/asm/irqflags.h index 1bf2cf2..cec6c06 100644 --- a/arch/ia64/include/asm/irqflags.h +++ b/arch/ia64/include/asm/irqflags.h @@ -11,6 +11,7 @@ #define _ASM_IA64_IRQFLAGS_H #include +#include #ifdef CONFIG_IA64_DEBUG_IRQ extern unsigned long last_cli_ip; -- cgit v0.10.2 From 14c14414d157ea851119c96c61a17306a2b4a035 Mon Sep 17 00:00:00 2001 From: Maxim Patlasov Date: Thu, 13 Jun 2013 12:16:39 +0400 Subject: fuse: hold i_mutex in fuse_file_fallocate() Changing size of a file on server and local update (fuse_write_update_size) should be always protected by inode->i_mutex. Otherwise a race like this is possible: 1. Process 'A' calls fallocate(2) to extend file (~FALLOC_FL_KEEP_SIZE). fuse_file_fallocate() sends FUSE_FALLOCATE request to the server. 2. Process 'B' calls ftruncate(2) shrinking the file. fuse_do_setattr() sends shrinking FUSE_SETATTR request to the server and updates local i_size by i_size_write(inode, outarg.attr.size). 3. Process 'A' resumes execution of fuse_file_fallocate() and calls fuse_write_update_size(inode, offset + length). But 'offset + length' was obsoleted by ftruncate from previous step. Changed in v2 (thanks Brian and Anand for suggestions): - made relation between mutex_lock() and fuse_set_nowrite(inode) more explicit and clear. - updated patch description to use ftruncate(2) in example Signed-off-by: Maxim V. Patlasov Reviewed-by: Brian Foster Signed-off-by: Miklos Szeredi diff --git a/fs/fuse/file.c b/fs/fuse/file.c index e570081..35f2810 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -2470,13 +2470,16 @@ static long fuse_file_fallocate(struct file *file, int mode, loff_t offset, .mode = mode }; int err; + bool lock_inode = !(mode & FALLOC_FL_KEEP_SIZE) || + (mode & FALLOC_FL_PUNCH_HOLE); if (fc->no_fallocate) return -EOPNOTSUPP; - if (mode & FALLOC_FL_PUNCH_HOLE) { + if (lock_inode) { mutex_lock(&inode->i_mutex); - fuse_set_nowrite(inode); + if (mode & FALLOC_FL_PUNCH_HOLE) + fuse_set_nowrite(inode); } req = fuse_get_req_nopages(fc); @@ -2511,8 +2514,9 @@ static long fuse_file_fallocate(struct file *file, int mode, loff_t offset, fuse_invalidate_attr(inode); out: - if (mode & FALLOC_FL_PUNCH_HOLE) { - fuse_release_nowrite(inode); + if (lock_inode) { + if (mode & FALLOC_FL_PUNCH_HOLE) + fuse_release_nowrite(inode); mutex_unlock(&inode->i_mutex); } -- cgit v0.10.2 From 764bcbc5a6d7a2f3e75c9f0e4caa984e2926e346 Mon Sep 17 00:00:00 2001 From: "Zhanghaoyu (A)" Date: Fri, 14 Jun 2013 07:36:13 +0000 Subject: KVM: x86: remove vcpu's CPL check in host-invoked XCR set __kvm_set_xcr function does the CPL check when set xcr. __kvm_set_xcr is called in two flows, one is invoked by guest, call stack shown as below, handle_xsetbv(or xsetbv_interception) kvm_set_xcr __kvm_set_xcr the other one is invoked by host, for example during system reset: kvm_arch_vcpu_ioctl kvm_vcpu_ioctl_x86_set_xcrs __kvm_set_xcr The former does need the CPL check, but the latter does not. Cc: stable@vger.kernel.org Signed-off-by: Zhang Haoyu [Tweaks to commit message. - Paolo] Signed-off-by: Paolo Bonzini diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 094b5d9..e8ba99c 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -582,8 +582,6 @@ int __kvm_set_xcr(struct kvm_vcpu *vcpu, u32 index, u64 xcr) if (index != XCR_XFEATURE_ENABLED_MASK) return 1; xcr0 = xcr; - if (kvm_x86_ops->get_cpl(vcpu) != 0) - return 1; if (!(xcr0 & XSTATE_FP)) return 1; if ((xcr0 & XSTATE_YMM) && !(xcr0 & XSTATE_SSE)) @@ -597,7 +595,8 @@ int __kvm_set_xcr(struct kvm_vcpu *vcpu, u32 index, u64 xcr) int kvm_set_xcr(struct kvm_vcpu *vcpu, u32 index, u64 xcr) { - if (__kvm_set_xcr(vcpu, index, xcr)) { + if (kvm_x86_ops->get_cpl(vcpu) != 0 || + __kvm_set_xcr(vcpu, index, xcr)) { kvm_inject_gp(vcpu, 0); return 1; } -- cgit v0.10.2 From d8d386c10630d8f7837700f4c466443d49e12cc0 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 13 Jun 2013 13:17:01 -0700 Subject: x86, mtrr: Fix original mtrr range get for mtrr_cleanup Joshua reported: Commit cd7b304dfaf1 (x86, range: fix missing merge during add range) broke mtrr cleanup on his setup in 3.9.5. corresponding commit in upstream is fbe06b7bae7c. *BAD*gran_size: 64K chunk_size: 16M num_reg: 6 lose cover RAM: -0G https://bugzilla.kernel.org/show_bug.cgi?id=59491 So it rejects new var mtrr layout. It turns out we have some problem with initial mtrr range retrieval. The current sequence is: x86_get_mtrr_mem_range ==> bunchs of add_range_with_merge ==> bunchs of subract_range ==> clean_sort_range add_range_with_merge for [0,1M) sort_range() add_range_with_merge could have blank slots, so we can not just sort only, that will have final result have extra blank slot in head. So move that calling add_range_with_merge for [0,1M), with that we could avoid extra clean_sort_range calling. Reported-by: Joshua Covington Tested-by: Joshua Covington Signed-off-by: Yinghai Lu Link: http://lkml.kernel.org/r/1371154622-8929-2-git-send-email-yinghai@kernel.org Cc: v3.9 Signed-off-by: H. Peter Anvin diff --git a/arch/x86/kernel/cpu/mtrr/cleanup.c b/arch/x86/kernel/cpu/mtrr/cleanup.c index 35ffda5..5f90b85 100644 --- a/arch/x86/kernel/cpu/mtrr/cleanup.c +++ b/arch/x86/kernel/cpu/mtrr/cleanup.c @@ -714,15 +714,15 @@ int __init mtrr_cleanup(unsigned address_bits) if (mtrr_tom2) x_remove_size = (mtrr_tom2 >> PAGE_SHIFT) - x_remove_base; - nr_range = x86_get_mtrr_mem_range(range, 0, x_remove_base, x_remove_size); /* * [0, 1M) should always be covered by var mtrr with WB * and fixed mtrrs should take effect before var mtrr for it: */ - nr_range = add_range_with_merge(range, RANGE_NUM, nr_range, 0, + nr_range = add_range_with_merge(range, RANGE_NUM, 0, 0, 1ULL<<(20 - PAGE_SHIFT)); - /* Sort the ranges: */ - sort_range(range, nr_range); + /* add from var mtrr at last */ + nr_range = x86_get_mtrr_mem_range(range, nr_range, + x_remove_base, x_remove_size); range_sums = sum_ranges(range, nr_range); printk(KERN_INFO "total RAM covered: %ldM\n", -- cgit v0.10.2 From 0541881502a1276149889fe468662ff6a8fc8f6d Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 13 Jun 2013 13:17:02 -0700 Subject: range: Do not add new blank slot with add_range_with_merge Joshua reported: Commit cd7b304dfaf1 (x86, range: fix missing merge during add range) broke mtrr cleanup on his setup in 3.9.5. corresponding commit in upstream is fbe06b7bae7c. The reason is add_range_with_merge could generate blank spot. We could avoid that by searching new expanded start/end, that new range should include all connected ranges in range array. At last add the new expanded start/end to the range array. Also move up left array so do not add new blank slot in the range array. -v2: move left array to avoid enhance add_range() -v3: include fix from Joshua about memmove declaring when DYN_DEBUG is used. Reported-by: Joshua Covington Tested-by: Joshua Covington Signed-off-by: Yinghai Lu Link: http://lkml.kernel.org/r/1371154622-8929-3-git-send-email-yinghai@kernel.org Cc: v3.9 Signed-off-by: H. Peter Anvin diff --git a/kernel/range.c b/kernel/range.c index eb911db..322ea8e 100644 --- a/kernel/range.c +++ b/kernel/range.c @@ -4,7 +4,7 @@ #include #include #include - +#include #include int add_range(struct range *range, int az, int nr_range, u64 start, u64 end) @@ -32,9 +32,8 @@ int add_range_with_merge(struct range *range, int az, int nr_range, if (start >= end) return nr_range; - /* Try to merge it with old one: */ + /* get new start/end: */ for (i = 0; i < nr_range; i++) { - u64 final_start, final_end; u64 common_start, common_end; if (!range[i].end) @@ -45,14 +44,16 @@ int add_range_with_merge(struct range *range, int az, int nr_range, if (common_start > common_end) continue; - final_start = min(range[i].start, start); - final_end = max(range[i].end, end); + /* new start/end, will add it back at last */ + start = min(range[i].start, start); + end = max(range[i].end, end); - /* clear it and add it back for further merge */ - range[i].start = 0; - range[i].end = 0; - return add_range_with_merge(range, az, nr_range, - final_start, final_end); + memmove(&range[i], &range[i + 1], + (nr_range - (i + 1)) * sizeof(range[i])); + range[nr_range - 1].start = 0; + range[nr_range - 1].end = 0; + nr_range--; + i--; } /* Need to add it: */ -- cgit v0.10.2 From 035978beaf79e3bd0c4f6308e8c8ce5067e26b9d Mon Sep 17 00:00:00 2001 From: George Spelvin Date: Mon, 17 Jun 2013 01:45:50 -0400 Subject: usb: phy: Improve Kconfig help for CONFIG_USB_PHY The previous text confused users by not describing the very common (e.g. x86 PC) sitations where no PHY driver is necessary. Signed-off-by: George Spelvin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 7ef3eb8..2311b1e 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -4,11 +4,17 @@ menuconfig USB_PHY bool "USB Physical Layer drivers" help - USB controllers (those which are host, device or DRD) need a - device to handle the physical layer signalling, commonly called - a PHY. + Most USB controllers have the physical layer signalling part + (commonly called a PHY) built in. However, dual-role devices + (a.k.a. USB on-the-go) which support being USB master or slave + with the same connector often use an external PHY. - The following drivers add support for such PHY devices. + The drivers in this submenu add support for such PHY devices. + They are not needed for standard master-only (or the vast + majority of slave-only) USB interfaces. + + If you're not sure if this applies to you, it probably doesn't; + say N here. if USB_PHY -- cgit v0.10.2 From 875979368eb4cfecff9f0e97625b90cc6009269d Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Sat, 15 Jun 2013 16:36:38 +0800 Subject: firmware loader: fix use-after-free by double abort fw_priv->buf is accessed in both request_firmware_load() and writing to sysfs file of 'loading' context, but not protected by 'fw_lock' entirely. The patch makes sure that access on 'fw_priv->buf' is protected by the lock. So fixes the double abort problem reported by nirinA raseliarison: http://lkml.org/lkml/2013/6/14/188 Reported-and-tested-by: nirinA raseliarison Cc: Guenter Roeck Cc: Bjorn Helgaas Cc: stable # 3.9 Signed-off-by: Ming Lei Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c index 4b1f926..01e2103 100644 --- a/drivers/base/firmware_class.c +++ b/drivers/base/firmware_class.c @@ -450,8 +450,18 @@ static void fw_load_abort(struct firmware_priv *fw_priv) { struct firmware_buf *buf = fw_priv->buf; + /* + * There is a small window in which user can write to 'loading' + * between loading done and disappearance of 'loading' + */ + if (test_bit(FW_STATUS_DONE, &buf->status)) + return; + set_bit(FW_STATUS_ABORT, &buf->status); complete_all(&buf->completion); + + /* avoid user action after loading abort */ + fw_priv->buf = NULL; } #define is_fw_load_aborted(buf) \ @@ -528,7 +538,12 @@ static ssize_t firmware_loading_show(struct device *dev, struct device_attribute *attr, char *buf) { struct firmware_priv *fw_priv = to_firmware_priv(dev); - int loading = test_bit(FW_STATUS_LOADING, &fw_priv->buf->status); + int loading = 0; + + mutex_lock(&fw_lock); + if (fw_priv->buf) + loading = test_bit(FW_STATUS_LOADING, &fw_priv->buf->status); + mutex_unlock(&fw_lock); return sprintf(buf, "%d\n", loading); } @@ -570,12 +585,12 @@ static ssize_t firmware_loading_store(struct device *dev, const char *buf, size_t count) { struct firmware_priv *fw_priv = to_firmware_priv(dev); - struct firmware_buf *fw_buf = fw_priv->buf; + struct firmware_buf *fw_buf; int loading = simple_strtol(buf, NULL, 10); int i; mutex_lock(&fw_lock); - + fw_buf = fw_priv->buf; if (!fw_buf) goto out; @@ -777,10 +792,6 @@ static void firmware_class_timeout_work(struct work_struct *work) struct firmware_priv, timeout_work.work); mutex_lock(&fw_lock); - if (test_bit(FW_STATUS_DONE, &(fw_priv->buf->status))) { - mutex_unlock(&fw_lock); - return; - } fw_load_abort(fw_priv); mutex_unlock(&fw_lock); } @@ -861,8 +872,6 @@ static int _request_firmware_load(struct firmware_priv *fw_priv, bool uevent, cancel_delayed_work_sync(&fw_priv->timeout_work); - fw_priv->buf = NULL; - device_remove_file(f_dev, &dev_attr_loading); err_del_bin_attr: device_remove_bin_file(f_dev, &firmware_attr_data); -- cgit v0.10.2 From 5548f98c46538d1da04eff179a52e50537d11465 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Tue, 18 Jun 2013 17:29:44 +0300 Subject: spi/pxa2xx: use GFP_ATOMIC in sg table allocation pxa2xx_spi_map_dma_buffer() gets called in tasklet context so we can't sleep when we allocate a new sg table. Use GFP_ATOMIC here instead. Signed-off-by: Mika Westerberg Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/drivers/spi/spi-pxa2xx-dma.c b/drivers/spi/spi-pxa2xx-dma.c index c735c5a..6427600 100644 --- a/drivers/spi/spi-pxa2xx-dma.c +++ b/drivers/spi/spi-pxa2xx-dma.c @@ -59,7 +59,7 @@ static int pxa2xx_spi_map_dma_buffer(struct driver_data *drv_data, int ret; sg_free_table(sgt); - ret = sg_alloc_table(sgt, nents, GFP_KERNEL); + ret = sg_alloc_table(sgt, nents, GFP_ATOMIC); if (ret) return ret; } -- cgit v0.10.2 From 91ea8207168793b365322be3c90a4ee9e8b03ed4 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Wed, 5 Jun 2013 20:50:01 +0000 Subject: parisc: fix kernel BUG at arch/parisc/include/asm/mmzone.h:50 (part 2) Make sure that we really return -1 (instead of 0x00ff) as node id for page frame numbers which are not physically available. This finally fixes the kernel panic when running cat /proc/kpageflags /proc/kpagecount. Theoretically this patch now limits the number of physical memory ranges to 127 instead of 254, but currently we have MAX_PHYSMEM_RANGES hardcoded to 8 which is sufficient for all existing parisc machines. Signed-off-by: Helge Deller diff --git a/arch/parisc/include/asm/mmzone.h b/arch/parisc/include/asm/mmzone.h index cc50d33..b6b34a0 100644 --- a/arch/parisc/include/asm/mmzone.h +++ b/arch/parisc/include/asm/mmzone.h @@ -27,7 +27,7 @@ extern struct node_map_data node_data[]; #define PFNNID_SHIFT (30 - PAGE_SHIFT) #define PFNNID_MAP_MAX 512 /* support 512GB */ -extern unsigned char pfnnid_map[PFNNID_MAP_MAX]; +extern signed char pfnnid_map[PFNNID_MAP_MAX]; #ifndef CONFIG_64BIT #define pfn_is_io(pfn) ((pfn & (0xf0000000UL >> PAGE_SHIFT)) == (0xf0000000UL >> PAGE_SHIFT)) @@ -46,7 +46,7 @@ static inline int pfn_to_nid(unsigned long pfn) i = pfn >> PFNNID_SHIFT; BUG_ON(i >= ARRAY_SIZE(pfnnid_map)); - return (int)pfnnid_map[i]; + return pfnnid_map[i]; } static inline int pfn_valid(int pfn) diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index 1c96564..505b56c 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -47,7 +47,7 @@ pte_t pg0[PT_INITIAL * PTRS_PER_PTE] __attribute__ ((__section__ (".data..vm0.pt #ifdef CONFIG_DISCONTIGMEM struct node_map_data node_data[MAX_NUMNODES] __read_mostly; -unsigned char pfnnid_map[PFNNID_MAP_MAX] __read_mostly; +signed char pfnnid_map[PFNNID_MAP_MAX] __read_mostly; #endif static struct resource data_resource = { -- cgit v0.10.2 From 9a66d1869d90f13fbaf83dcce5b1aeec86fbc699 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Sun, 9 Jun 2013 23:00:21 +0200 Subject: parisc: fix serial ports on C8000 workstation The C8000 workstation (64 bit kernel only) has a somewhat different serial port configuration than other models. Thomas Bogendoerfer sent a patch to fix this in September 2010, which was now minimally modified by me. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Helge Deller diff --git a/arch/parisc/kernel/hardware.c b/arch/parisc/kernel/hardware.c index 9e2d2e4..8722756 100644 --- a/arch/parisc/kernel/hardware.c +++ b/arch/parisc/kernel/hardware.c @@ -1205,6 +1205,7 @@ static struct hp_hardware hp_hardware_list[] = { {HPHW_FIO, 0x004, 0x00320, 0x0, "Metheus Frame Buffer"}, {HPHW_FIO, 0x004, 0x00340, 0x0, "BARCO CX4500 VME Grphx Cnsl"}, {HPHW_FIO, 0x004, 0x00360, 0x0, "Hughes TOG VME FDDI"}, + {HPHW_FIO, 0x076, 0x000AD, 0x00, "Crestone Peak RS-232"}, {HPHW_IOA, 0x185, 0x0000B, 0x00, "Java BC Summit Port"}, {HPHW_IOA, 0x1FF, 0x0000B, 0x00, "Hitachi Ghostview Summit Port"}, {HPHW_IOA, 0x580, 0x0000B, 0x10, "U2-IOA BC Runway Port"}, diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c index 9544cdc..e79e006 100644 --- a/drivers/parisc/iosapic.c +++ b/drivers/parisc/iosapic.c @@ -811,6 +811,70 @@ int iosapic_fixup_irq(void *isi_obj, struct pci_dev *pcidev) return pcidev->irq; } +static struct iosapic_info *first_isi = NULL; + +#ifdef CONFIG_64BIT +int iosapic_serial_irq(int num) +{ + struct iosapic_info *isi = first_isi; + struct irt_entry *irte = NULL; /* only used if PAT PDC */ + struct vector_info *vi; + int isi_line; /* line used by device */ + + /* lookup IRT entry for isi/slot/pin set */ + irte = &irt_cell[num]; + + DBG_IRT("iosapic_serial_irq(): irte %p %x %x %x %x %x %x %x %x\n", + irte, + irte->entry_type, + irte->entry_length, + irte->polarity_trigger, + irte->src_bus_irq_devno, + irte->src_bus_id, + irte->src_seg_id, + irte->dest_iosapic_intin, + (u32) irte->dest_iosapic_addr); + isi_line = irte->dest_iosapic_intin; + + /* get vector info for this input line */ + vi = isi->isi_vector + isi_line; + DBG_IRT("iosapic_serial_irq: line %d vi 0x%p\n", isi_line, vi); + + /* If this IRQ line has already been setup, skip it */ + if (vi->irte) + goto out; + + vi->irte = irte; + + /* + * Allocate processor IRQ + * + * XXX/FIXME The txn_alloc_irq() code and related code should be + * moved to enable_irq(). That way we only allocate processor IRQ + * bits for devices that actually have drivers claiming them. + * Right now we assign an IRQ to every PCI device present, + * regardless of whether it's used or not. + */ + vi->txn_irq = txn_alloc_irq(8); + + if (vi->txn_irq < 0) + panic("I/O sapic: couldn't get TXN IRQ\n"); + + /* enable_irq() will use txn_* to program IRdT */ + vi->txn_addr = txn_alloc_addr(vi->txn_irq); + vi->txn_data = txn_alloc_data(vi->txn_irq); + + vi->eoi_addr = isi->addr + IOSAPIC_REG_EOI; + vi->eoi_data = cpu_to_le32(vi->txn_data); + + cpu_claim_irq(vi->txn_irq, &iosapic_interrupt_type, vi); + + out: + + return vi->txn_irq; +} +#endif + /* ** squirrel away the I/O Sapic Version @@ -877,6 +941,8 @@ void *iosapic_register(unsigned long hpa) vip->irqline = (unsigned char) cnt; vip->iosapic = isi; } + if (!first_isi) + first_isi = isi; return isi; } diff --git a/drivers/tty/serial/8250/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c index 097dff9..bb91b47 100644 --- a/drivers/tty/serial/8250/8250_gsc.c +++ b/drivers/tty/serial/8250/8250_gsc.c @@ -30,6 +30,12 @@ static int __init serial_init_chip(struct parisc_device *dev) unsigned long address; int err; +#ifdef CONFIG_64BIT + extern int iosapic_serial_irq(int cellnum); + if (!dev->irq && (dev->id.sversion == 0xad)) + dev->irq = iosapic_serial_irq(dev->mod_index-1); +#endif + if (!dev->irq) { /* We find some unattached serial ports by walking native * busses. These should be silently ignored. Otherwise, @@ -51,7 +57,8 @@ static int __init serial_init_chip(struct parisc_device *dev) memset(&uart, 0, sizeof(uart)); uart.port.iotype = UPIO_MEM; /* 7.272727MHz on Lasi. Assumed the same for Dino, Wax and Timi. */ - uart.port.uartclk = 7272727; + uart.port.uartclk = (dev->id.sversion != 0xad) ? + 7272727 : 1843200; uart.port.mapbase = address; uart.port.membase = ioremap_nocache(address, 16); uart.port.irq = dev->irq; @@ -73,6 +80,7 @@ static struct parisc_device_id serial_tbl[] = { { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00075 }, { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008c }, { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008d }, + { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x000ad }, { 0 } }; -- cgit v0.10.2 From 2cc7138f4347df939ce03f313e3d87794bab36f8 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Fri, 14 Jun 2013 09:05:41 +0200 Subject: parisc: provide pci_mmap_page_range() for parisc pci_mmap_page_range() is needed for X11-server support on C8000 with ATI FireGL card. Signed-off-by Thomas Bogendoerfer Signed-off-by: Helge Deller diff --git a/arch/parisc/include/asm/pci.h b/arch/parisc/include/asm/pci.h index 3234f49..4651540 100644 --- a/arch/parisc/include/asm/pci.h +++ b/arch/parisc/include/asm/pci.h @@ -225,4 +225,9 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) return channel ? 15 : 14; } +#define HAVE_PCI_MMAP + +extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine); + #endif /* __ASM_PARISC_PCI_H */ diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c index 6030905..64f2764 100644 --- a/arch/parisc/kernel/pci.c +++ b/arch/parisc/kernel/pci.c @@ -220,6 +220,33 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res, } +int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine) +{ + unsigned long prot; + + /* + * I/O space can be accessed via normal processor loads and stores on + * this platform but for now we elect not to do this and portable + * drivers should not do this anyway. + */ + if (mmap_state == pci_mmap_io) + return -EINVAL; + + if (write_combine) + return -EINVAL; + + /* + * Ignore write-combine; for now only return uncached mappings. + */ + prot = pgprot_val(vma->vm_page_prot); + prot |= _PAGE_NO_CACHE; + vma->vm_page_prot = __pgprot(prot); + + return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, + vma->vm_end - vma->vm_start, vma->vm_page_prot); +} + /* * A driver is enabling the device. We make sure that all the appropriate * bits are set to allow the device to operate as the driver is expecting. -- cgit v0.10.2 From d65ea48dc61ffdf6cd7f25b4c319bbd68015e018 Mon Sep 17 00:00:00 2001 From: John David Anglin Date: Sun, 2 Jun 2013 12:21:48 -0400 Subject: parisc: Use unshadowed index register for flush instructions in flush_dcache_page_asm and flush_icache_page_asm The comment at the start of pacache.S states that the base and index registers used for fdc,fic, and pdc instructions should not use shadowed registers. Although this is probably unnecessary for tmpalias flushes, there is also no reason not to comply. Signed-off-by: John David Anglin Signed-off-by: Helge Deller diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S index 36d7f40..b743a80 100644 --- a/arch/parisc/kernel/pacache.S +++ b/arch/parisc/kernel/pacache.S @@ -860,7 +860,7 @@ ENTRY(flush_dcache_page_asm) #endif ldil L%dcache_stride, %r1 - ldw R%dcache_stride(%r1), %r1 + ldw R%dcache_stride(%r1), r31 #ifdef CONFIG_64BIT depdi,z 1, 63-PAGE_SHIFT,1, %r25 @@ -868,26 +868,26 @@ ENTRY(flush_dcache_page_asm) depwi,z 1, 31-PAGE_SHIFT,1, %r25 #endif add %r28, %r25, %r25 - sub %r25, %r1, %r25 - - -1: fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) + sub %r25, r31, %r25 + + +1: fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) cmpb,COND(<<) %r28, %r25,1b - fdc,m %r1(%r28) + fdc,m r31(%r28) sync @@ -936,7 +936,7 @@ ENTRY(flush_icache_page_asm) #endif ldil L%icache_stride, %r1 - ldw R%icache_stride(%r1), %r1 + ldw R%icache_stride(%r1), %r31 #ifdef CONFIG_64BIT depdi,z 1, 63-PAGE_SHIFT,1, %r25 @@ -944,28 +944,28 @@ ENTRY(flush_icache_page_asm) depwi,z 1, 31-PAGE_SHIFT,1, %r25 #endif add %r28, %r25, %r25 - sub %r25, %r1, %r25 + sub %r25, %r31, %r25 /* fic only has the type 26 form on PA1.1, requiring an * explicit space specification, so use %sr4 */ -1: fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) +1: fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) cmpb,COND(<<) %r28, %r25,1b - fic,m %r1(%sr4,%r28) + fic,m %r31(%sr4,%r28) sync -- cgit v0.10.2 From d1603990ea626668c78527376d9ec084d634202d Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 18 Jun 2013 12:33:40 -0700 Subject: x86: fix build error and kconfig for ia32_emulation and binfmt Fix kconfig warning and build errors on x86_64 by selecting BINFMT_ELF when COMPAT_BINFMT_ELF is being selected. warning: (IA32_EMULATION) selects COMPAT_BINFMT_ELF which has unmet direct dependencies (COMPAT && BINFMT_ELF) fs/built-in.o: In function `elf_core_dump': compat_binfmt_elf.c:(.text+0x3e093): undefined reference to `elf_core_extra_phdrs' compat_binfmt_elf.c:(.text+0x3ebcd): undefined reference to `elf_core_extra_data_size' compat_binfmt_elf.c:(.text+0x3eddd): undefined reference to `elf_core_write_extra_phdrs' compat_binfmt_elf.c:(.text+0x3f004): undefined reference to `elf_core_write_extra_data' [ hpa: This was sent to me for -next but it is a low risk build fix ] Signed-off-by: Randy Dunlap Link: http://lkml.kernel.org/r/51C0B614.5000708@infradead.org Cc: Signed-off-by: H. Peter Anvin diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 685692c..fe120da 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -2265,6 +2265,7 @@ source "fs/Kconfig.binfmt" config IA32_EMULATION bool "IA32 Emulation" depends on X86_64 + select BINFMT_ELF select COMPAT_BINFMT_ELF select HAVE_UID16 ---help--- -- cgit v0.10.2 From 06f3d7f973ec04290d86b7dd91b48d38d90433dc Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Tue, 18 Jun 2013 10:08:06 +0300 Subject: ipvs: SCTP ports should be writable in ICMP packets Make sure that SCTP ports are writable when embedded in ICMP from client, so that ip_vs_nat_icmp can translate them safely. Signed-off-by: Julian Anastasov Signed-off-by: Simon Horman diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c index 05565d2..23b8eb5 100644 --- a/net/netfilter/ipvs/ip_vs_core.c +++ b/net/netfilter/ipvs/ip_vs_core.c @@ -1442,7 +1442,8 @@ ignore_ipip: /* do the statistics and put it back */ ip_vs_in_stats(cp, skb); - if (IPPROTO_TCP == cih->protocol || IPPROTO_UDP == cih->protocol) + if (IPPROTO_TCP == cih->protocol || IPPROTO_UDP == cih->protocol || + IPPROTO_SCTP == cih->protocol) offset += 2 * sizeof(__u16); verdict = ip_vs_icmp_xmit(skb, cp, pp, offset, hooknum, &ciph); -- cgit v0.10.2 From ebc0bad4a05ad63979e8bc115cea3b8abdf814c7 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 19 Jun 2013 03:14:20 +0200 Subject: drm/prime: Honor requested file flags when exporting a buffer The DRM PRIME API passes file flags to the driver for the exported buffer. Honor them instead of hardcoding 0600. Signed-off-by: Laurent Pinchart Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_prime.c b/drivers/gpu/drm/drm_prime.c index dcde352..5b7b911 100644 --- a/drivers/gpu/drm/drm_prime.c +++ b/drivers/gpu/drm/drm_prime.c @@ -190,8 +190,7 @@ struct dma_buf *drm_gem_prime_export(struct drm_device *dev, if (ret) return ERR_PTR(ret); } - return dma_buf_export(obj, &drm_gem_prime_dmabuf_ops, obj->size, - 0600); + return dma_buf_export(obj, &drm_gem_prime_dmabuf_ops, obj->size, flags); } EXPORT_SYMBOL(drm_gem_prime_export); -- cgit v0.10.2 From 7d753b0d387073be243f7ff52cc84dfa1391c1e7 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Tue, 18 Jun 2013 23:14:25 -0700 Subject: Input: wacom - add a new stylus (0x100802) for Intuos5 and Cintiqs Signed-off-by: Ping Cheng Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 518282d..384fbcd 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -363,6 +363,7 @@ static int wacom_intuos_inout(struct wacom_wac *wacom) case 0x140802: /* Intuos4/5 13HD/24HD Classic Pen */ case 0x160802: /* Cintiq 13HD Pro Pen */ case 0x180802: /* DTH2242 Pen */ + case 0x100802: /* Intuos4/5 13HD/24HD General Pen */ wacom->tool[idx] = BTN_TOOL_PEN; break; @@ -401,6 +402,7 @@ static int wacom_intuos_inout(struct wacom_wac *wacom) case 0x10080c: /* Intuos4/5 13HD/24HD Art Pen Eraser */ case 0x16080a: /* Cintiq 13HD Pro Pen Eraser */ case 0x18080a: /* DTH2242 Eraser */ + case 0x10080a: /* Intuos4/5 13HD/24HD General Pen Eraser */ wacom->tool[idx] = BTN_TOOL_RUBBER; break; -- cgit v0.10.2 From be66227151c0cd4da536098c3ee07809101c6faa Mon Sep 17 00:00:00 2001 From: Shawn Joseph Date: Tue, 18 Jun 2013 23:07:45 -0700 Subject: Input: xpad - fix for "Mad Catz Street Fighter IV FightPad" controllers Added MAP_TRIGGERS_TO_BUTTONS for Mad Catz Street Fighter IV FightPad device. This controller model was already supported by the xpad driver, but none of the buttons work correctly without this change. Tested on kernel version 3.9.5. Signed-off-by: Shawn Joseph Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index d6cbfe9..fa061d4 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -137,7 +137,7 @@ static const struct xpad_device { { 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, { 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", 0, XTYPE_XBOX }, { 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", 0, XTYPE_XBOX360 }, - { 0x0738, 0x4728, "Mad Catz Street Fighter IV FightPad", XTYPE_XBOX360 }, + { 0x0738, 0x4728, "Mad Catz Street Fighter IV FightPad", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x0738, 0x4738, "Mad Catz Wired Xbox 360 Controller (SFIV)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, { 0x0738, 0xbeef, "Mad Catz JOYTECH NEO SE Advanced GamePad", XTYPE_XBOX360 }, -- cgit v0.10.2 From 690cec8e70c211d1f5f6e520b21a68d0306173b6 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 14 Jun 2013 01:18:44 +0100 Subject: s390/irq: Only define synchronize_irq() on SMP In uniprocessor configurations, synchronize_irq() is defined in as a macro, and this function definition fails to compile. Reported-by: kbuild test robot Signed-off-by: Ben Hutchings Cc: stable@vger.kernel.org # 3.9 Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c index 408e866..dd3c199 100644 --- a/arch/s390/kernel/irq.c +++ b/arch/s390/kernel/irq.c @@ -312,6 +312,7 @@ void measurement_alert_subclass_unregister(void) } EXPORT_SYMBOL(measurement_alert_subclass_unregister); +#ifdef CONFIG_SMP void synchronize_irq(unsigned int irq) { /* @@ -320,6 +321,7 @@ void synchronize_irq(unsigned int irq) */ } EXPORT_SYMBOL_GPL(synchronize_irq); +#endif #ifndef CONFIG_PCI -- cgit v0.10.2 From 73e5a848426fae8e7f1f685389aa61d7a98e7c36 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Tue, 18 Jun 2013 17:32:26 +0200 Subject: s390/dma: fix mapping_error detection The map_page implementation of s390 returns DMA_ERROR_CODE in an error situation. Correctly test if a mapping was erroneous (DMA_ERROR_CODE is defined as ~0). Signed-off-by: Sebastian Ott Acked-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/asm/dma-mapping.h b/arch/s390/include/asm/dma-mapping.h index 886ac7d..9f15a36 100644 --- a/arch/s390/include/asm/dma-mapping.h +++ b/arch/s390/include/asm/dma-mapping.h @@ -52,7 +52,7 @@ static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) if (dma_ops->mapping_error) return dma_ops->mapping_error(dev, dma_addr); - return (dma_addr == 0UL); + return (dma_addr == DMA_ERROR_CODE); } static inline void *dma_alloc_coherent(struct device *dev, size_t size, -- cgit v0.10.2 From 4026099a3118a1e038c48f3f85203a674938025b Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Tue, 18 Jun 2013 17:38:31 +0200 Subject: s390/dma: support debug_dma_mapping_error Without this patch drivers will get blamed (CONFIG_DMA_API_DEBUG=y) for not calling dma_mapping_error (even if they do). Signed-off-by: Sebastian Ott Acked-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/asm/dma-mapping.h b/arch/s390/include/asm/dma-mapping.h index 9f15a36..2f8c1ab 100644 --- a/arch/s390/include/asm/dma-mapping.h +++ b/arch/s390/include/asm/dma-mapping.h @@ -50,6 +50,7 @@ static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) { struct dma_map_ops *dma_ops = get_dma_ops(dev); + debug_dma_mapping_error(dev, dma_addr); if (dma_ops->mapping_error) return dma_ops->mapping_error(dev, dma_addr); return (dma_addr == DMA_ERROR_CODE); -- cgit v0.10.2 From c9036e9f3b2b77f678572260e1ef1075fcb08c36 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 19 Jun 2013 12:35:42 +0400 Subject: mconsole: we'd better initialize pos before passing it to vfs_read()... Signed-off-by: Al Viro diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c index d7d2185..3df3bd5 100644 --- a/arch/um/drivers/mconsole_kern.c +++ b/arch/um/drivers/mconsole_kern.c @@ -147,7 +147,7 @@ void mconsole_proc(struct mc_request *req) } do { - loff_t pos; + loff_t pos = file->f_pos; mm_segment_t old_fs = get_fs(); set_fs(KERNEL_DS); len = vfs_read(file, buf, PAGE_SIZE - 1, &pos); -- cgit v0.10.2 From ccd847b2c101a7e5772d0463ac76f7c18732675a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 7 May 2013 11:55:55 +0200 Subject: sparc: Switch to asm-generic/linkage.h Signed-off-by: Geert Uytterhoeven Signed-off-by: David S. Miller diff --git a/arch/sparc/include/asm/Kbuild b/arch/sparc/include/asm/Kbuild index ff18e3c..7e4a97f 100644 --- a/arch/sparc/include/asm/Kbuild +++ b/arch/sparc/include/asm/Kbuild @@ -6,6 +6,7 @@ generic-y += cputime.h generic-y += div64.h generic-y += emergency-restart.h generic-y += exec.h +generic-y += linkage.h generic-y += local64.h generic-y += mutex.h generic-y += irq_regs.h diff --git a/arch/sparc/include/asm/linkage.h b/arch/sparc/include/asm/linkage.h deleted file mode 100644 index 291c2d0..0000000 --- a/arch/sparc/include/asm/linkage.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_LINKAGE_H -#define __ASM_LINKAGE_H - -/* Nothing to see here... */ - -#endif -- cgit v0.10.2 From dbebe0da64d0738a21221a7f9d29510b9f29d908 Mon Sep 17 00:00:00 2001 From: Denis Efremov Date: Thu, 9 May 2013 14:36:54 +0400 Subject: sparc: remove inline marking of EXPORT_SYMBOL functions EXPORT_SYMBOL and inline directives are contradictory to each other. The patch fixes this inconsistency. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Denis Efremov Signed-off-by: David S. Miller diff --git a/arch/sparc/prom/tree_64.c b/arch/sparc/prom/tree_64.c index 92204c3..bd1b2a3 100644 --- a/arch/sparc/prom/tree_64.c +++ b/arch/sparc/prom/tree_64.c @@ -39,7 +39,7 @@ inline phandle __prom_getchild(phandle node) return prom_node_to_node("child", node); } -inline phandle prom_getchild(phandle node) +phandle prom_getchild(phandle node) { phandle cnode; @@ -72,7 +72,7 @@ inline phandle __prom_getsibling(phandle node) return prom_node_to_node(prom_peer_name, node); } -inline phandle prom_getsibling(phandle node) +phandle prom_getsibling(phandle node) { phandle sibnode; @@ -89,7 +89,7 @@ EXPORT_SYMBOL(prom_getsibling); /* Return the length in bytes of property 'prop' at node 'node'. * Return -1 on error. */ -inline int prom_getproplen(phandle node, const char *prop) +int prom_getproplen(phandle node, const char *prop) { unsigned long args[6]; @@ -113,8 +113,8 @@ EXPORT_SYMBOL(prom_getproplen); * 'buffer' which has a size of 'bufsize'. If the acquisition * was successful the length will be returned, else -1 is returned. */ -inline int prom_getproperty(phandle node, const char *prop, - char *buffer, int bufsize) +int prom_getproperty(phandle node, const char *prop, + char *buffer, int bufsize) { unsigned long args[8]; int plen; @@ -141,7 +141,7 @@ EXPORT_SYMBOL(prom_getproperty); /* Acquire an integer property and return its value. Returns -1 * on failure. */ -inline int prom_getint(phandle node, const char *prop) +int prom_getint(phandle node, const char *prop) { int intprop; @@ -235,7 +235,7 @@ static const char *prom_nextprop_name = "nextprop"; /* Return the first property type for node 'node'. * buffer should be at least 32B in length */ -inline char *prom_firstprop(phandle node, char *buffer) +char *prom_firstprop(phandle node, char *buffer) { unsigned long args[7]; @@ -261,7 +261,7 @@ EXPORT_SYMBOL(prom_firstprop); * at node 'node' . Returns NULL string if no more * property types for this node. */ -inline char *prom_nextprop(phandle node, const char *oprop, char *buffer) +char *prom_nextprop(phandle node, const char *oprop, char *buffer) { unsigned long args[7]; char buf[32]; -- cgit v0.10.2 From 242ece22f0bd90e237365e51c5bd90a21693d6c3 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Thu, 30 May 2013 11:35:22 +0800 Subject: arch: sparc: prom: looping issue, need additional length check in the outside looping When "cp >= barg_buf + BARG_LEN-2", it breaks internel looping 'while', but outside loop 'for' still has effect, so "*cp++ = ' '" will continue repeating which may cause memory overflow. So need additional length check for it in the outside looping. Also beautify the related code which found by "./scripts/checkpatch.pl" Signed-off-by: Chen Gang Signed-off-by: David S. Miller diff --git a/arch/sparc/prom/bootstr_32.c b/arch/sparc/prom/bootstr_32.c index f5ec32e..d2b49d2 100644 --- a/arch/sparc/prom/bootstr_32.c +++ b/arch/sparc/prom/bootstr_32.c @@ -23,23 +23,25 @@ prom_getbootargs(void) return barg_buf; } - switch(prom_vers) { + switch (prom_vers) { case PROM_V0: cp = barg_buf; /* Start from 1 and go over fd(0,0,0)kernel */ - for(iter = 1; iter < 8; iter++) { + for (iter = 1; iter < 8; iter++) { arg = (*(romvec->pv_v0bootargs))->argv[iter]; if (arg == NULL) break; - while(*arg != 0) { + while (*arg != 0) { /* Leave place for space and null. */ - if(cp >= barg_buf + BARG_LEN-2){ + if (cp >= barg_buf + BARG_LEN - 2) /* We might issue a warning here. */ break; - } *cp++ = *arg++; } *cp++ = ' '; + if (cp >= barg_buf + BARG_LEN - 1) + /* We might issue a warning here. */ + break; } *cp = 0; break; -- cgit v0.10.2 From 117a0c5fc9c2d06045bd217385b2b39ea426b5a6 Mon Sep 17 00:00:00 2001 From: Zhao Hongjiang Date: Sun, 9 Jun 2013 16:57:58 +0800 Subject: sparc: kernel: using strlcpy() instead of strcpy() 'boot_command_line' and 'full_boot_str' has a fix length, 'cmdline_p' and 'boot_command' maybe larger than them. So use strlcpy() instead of strcpy() to avoid memory overflow. Signed-off-by: Zhao Hongjiang Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/ds.c b/arch/sparc/kernel/ds.c index 75bb608..5ef48da 100644 --- a/arch/sparc/kernel/ds.c +++ b/arch/sparc/kernel/ds.c @@ -843,7 +843,8 @@ void ldom_reboot(const char *boot_command) unsigned long len; strcpy(full_boot_str, "boot "); - strcpy(full_boot_str + strlen("boot "), boot_command); + strlcpy(full_boot_str + strlen("boot "), boot_command, + sizeof(full_boot_str + strlen("boot "))); len = strlen(full_boot_str); if (reboot_data_supported) { diff --git a/arch/sparc/kernel/setup_32.c b/arch/sparc/kernel/setup_32.c index 38bf80a..1434526 100644 --- a/arch/sparc/kernel/setup_32.c +++ b/arch/sparc/kernel/setup_32.c @@ -304,7 +304,7 @@ void __init setup_arch(char **cmdline_p) /* Initialize PROM console and command line. */ *cmdline_p = prom_getbootargs(); - strcpy(boot_command_line, *cmdline_p); + strlcpy(boot_command_line, *cmdline_p, COMMAND_LINE_SIZE); parse_early_param(); boot_flags_init(*cmdline_p); diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c index 88a127b..1378554 100644 --- a/arch/sparc/kernel/setup_64.c +++ b/arch/sparc/kernel/setup_64.c @@ -555,7 +555,7 @@ void __init setup_arch(char **cmdline_p) { /* Initialize PROM console and command line. */ *cmdline_p = prom_getbootargs(); - strcpy(boot_command_line, *cmdline_p); + strlcpy(boot_command_line, *cmdline_p, COMMAND_LINE_SIZE); parse_early_param(); boot_flags_init(*cmdline_p); -- cgit v0.10.2 From 1ffbc51a0d00e52983c70aa7c8dbc7b621d6287d Mon Sep 17 00:00:00 2001 From: Andreas Larsson Date: Mon, 10 Jun 2013 08:53:28 +0200 Subject: sparc32, leon: Remove separate "ticker" timer for SMP This reduces the need from two timers to one timer. Moreover, without this patch, when the "ticker" timer triggers timer_cs_read via tick_periodic it reads the value of the usual timer it can get an wrapped timer value without timer_cs_internal_counter having been updated leading to the clock going backwards. This effectively hangs one cpu that gets stuck in update_wall_time with an offset slightly smaller than 0xffffffffffffffff. Signed-off-by: Andreas Larsson Signed-off-by: David S. Miller diff --git a/arch/sparc/include/asm/leon.h b/arch/sparc/include/asm/leon.h index 15a7169..b836e92 100644 --- a/arch/sparc/include/asm/leon.h +++ b/arch/sparc/include/asm/leon.h @@ -135,7 +135,7 @@ static inline int sparc_leon3_cpuid(void) #ifdef CONFIG_SMP # define LEON3_IRQ_IPI_DEFAULT 13 -# define LEON3_IRQ_TICKER (leon3_ticker_irq) +# define LEON3_IRQ_TICKER (leon3_gptimer_irq) # define LEON3_IRQ_CROSS_CALL 15 #endif diff --git a/arch/sparc/include/asm/leon_amba.h b/arch/sparc/include/asm/leon_amba.h index f3034ed..24ec48c 100644 --- a/arch/sparc/include/asm/leon_amba.h +++ b/arch/sparc/include/asm/leon_amba.h @@ -47,6 +47,7 @@ struct amba_prom_registers { #define LEON3_GPTIMER_LD 4 #define LEON3_GPTIMER_IRQEN 8 #define LEON3_GPTIMER_SEPIRQ 8 +#define LEON3_GPTIMER_TIMERS 0x7 #define LEON23_REG_TIMER_CONTROL_EN 0x00000001 /* 1 = enable counting */ /* 0 = hold scalar and counter */ diff --git a/arch/sparc/kernel/leon_kernel.c b/arch/sparc/kernel/leon_kernel.c index 7c0231d..b7c6897 100644 --- a/arch/sparc/kernel/leon_kernel.c +++ b/arch/sparc/kernel/leon_kernel.c @@ -38,7 +38,6 @@ static DEFINE_SPINLOCK(leon_irq_lock); unsigned long leon3_gptimer_irq; /* interrupt controller irq number */ unsigned long leon3_gptimer_idx; /* Timer Index (0..6) within Timer Core */ -int leon3_ticker_irq; /* Timer ticker IRQ */ unsigned int sparc_leon_eirq; #define LEON_IMASK(cpu) (&leon3_irqctrl_regs->mask[cpu]) #define LEON_IACK (&leon3_irqctrl_regs->iclear) @@ -278,6 +277,9 @@ irqreturn_t leon_percpu_timer_ce_interrupt(int irq, void *unused) leon_clear_profile_irq(cpu); + if (cpu == boot_cpu_id) + timer_interrupt(irq, NULL); + ce = &per_cpu(sparc32_clockevent, cpu); irq_enter(); @@ -299,6 +301,7 @@ void __init leon_init_timers(void) int icsel; int ampopts; int err; + u32 config; sparc_config.get_cycles_offset = leon_cycles_offset; sparc_config.cs_period = 1000000 / HZ; @@ -377,23 +380,6 @@ void __init leon_init_timers(void) LEON3_BYPASS_STORE_PA( &leon3_gptimer_regs->e[leon3_gptimer_idx].ctrl, 0); -#ifdef CONFIG_SMP - leon3_ticker_irq = leon3_gptimer_irq + 1 + leon3_gptimer_idx; - - if (!(LEON3_BYPASS_LOAD_PA(&leon3_gptimer_regs->config) & - (1<e[leon3_gptimer_idx+1].val, - 0); - LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx+1].rld, - (((1000000/HZ) - 1))); - LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx+1].ctrl, - 0); -#endif - /* * The IRQ controller may (if implemented) consist of multiple * IRQ controllers, each mapped on a 4Kb boundary. @@ -416,13 +402,6 @@ void __init leon_init_timers(void) if (eirq != 0) leon_eirq_setup(eirq); - irq = _leon_build_device_irq(NULL, leon3_gptimer_irq+leon3_gptimer_idx); - err = request_irq(irq, timer_interrupt, IRQF_TIMER, "timer", NULL); - if (err) { - printk(KERN_ERR "unable to attach timer IRQ%d\n", irq); - prom_halt(); - } - #ifdef CONFIG_SMP { unsigned long flags; @@ -439,30 +418,31 @@ void __init leon_init_timers(void) } #endif - LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx].ctrl, - LEON3_GPTIMER_EN | - LEON3_GPTIMER_RL | - LEON3_GPTIMER_LD | - LEON3_GPTIMER_IRQEN); + config = LEON3_BYPASS_LOAD_PA(&leon3_gptimer_regs->config); + if (config & (1 << LEON3_GPTIMER_SEPIRQ)) + leon3_gptimer_irq += leon3_gptimer_idx; + else if ((config & LEON3_GPTIMER_TIMERS) > 1) + pr_warn("GPTIMER uses shared irqs, using other timers of the same core will fail.\n"); #ifdef CONFIG_SMP /* Install per-cpu IRQ handler for broadcasted ticker */ - irq = leon_build_device_irq(leon3_ticker_irq, handle_percpu_irq, + irq = leon_build_device_irq(leon3_gptimer_irq, handle_percpu_irq, "per-cpu", 0); err = request_irq(irq, leon_percpu_timer_ce_interrupt, - IRQF_PERCPU | IRQF_TIMER, "ticker", - NULL); + IRQF_PERCPU | IRQF_TIMER, "timer", NULL); +#else + irq = _leon_build_device_irq(NULL, leon3_gptimer_irq); + err = request_irq(irq, timer_interrupt, IRQF_TIMER, "timer", NULL); +#endif if (err) { - printk(KERN_ERR "unable to attach ticker IRQ%d\n", irq); + pr_err("Unable to attach timer IRQ%d\n", irq); prom_halt(); } - - LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx+1].ctrl, + LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx].ctrl, LEON3_GPTIMER_EN | LEON3_GPTIMER_RL | LEON3_GPTIMER_LD | LEON3_GPTIMER_IRQEN); -#endif return; bad: printk(KERN_ERR "No Timer/irqctrl found\n"); -- cgit v0.10.2 From d72ee6be58b7c99a6e8da6584106c5958dae2bf8 Mon Sep 17 00:00:00 2001 From: Andreas Larsson Date: Mon, 10 Jun 2013 08:56:41 +0200 Subject: sparc32, leon: Enable interrupts before going idle to avoid getting stuck This enables interrupts for Leon before having the CPU enter power-down mode. Commit 87fa05aeb3a5e8e21b1a5510eef6983650eff092, "sparc: Use generic idle loop", gets the CPU stuck on idle for Leon systems. On Leon, disabling interrupts and powering down the processor will get the processor stuck waiting for an interrupt that will never be reacted to. Signed-off-by: Andreas Larsson Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/leon_pmc.c b/arch/sparc/kernel/leon_pmc.c index bdf53d9..b0b3967 100644 --- a/arch/sparc/kernel/leon_pmc.c +++ b/arch/sparc/kernel/leon_pmc.c @@ -47,6 +47,10 @@ void pmc_leon_idle_fixup(void) * MMU does not get a TLB miss here by using the MMU BYPASS ASI. */ register unsigned int address = (unsigned int)leon3_irqctrl_regs; + + /* Interrupts need to be enabled to not hang the CPU */ + local_irq_enable(); + __asm__ __volatile__ ( "wr %%g0, %%asr19\n" "lda [%0] %1, %%g0\n" @@ -60,6 +64,9 @@ void pmc_leon_idle_fixup(void) */ void pmc_leon_idle(void) { + /* Interrupts need to be enabled to not hang the CPU */ + local_irq_enable(); + /* For systems without power-down, this will be no-op */ __asm__ __volatile__ ("wr %g0, %asr19\n\t"); } -- cgit v0.10.2 From 771a37ff4d80b80db3b0df3e7696f14b298c67b7 Mon Sep 17 00:00:00 2001 From: bob picco Date: Tue, 11 Jun 2013 14:54:51 -0400 Subject: sparc64 address-congruence property The Machine Description (MD) property "address-congruence-offset" is optional. According to the MD specification the value is assumed 0UL when not present. This caused early boot failure on T5. Signed-off-by: Bob Picco CC: sparclinux@vger.kernel.org Signed-off-by: David S. Miller diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c index a717199..04fd55a 100644 --- a/arch/sparc/mm/init_64.c +++ b/arch/sparc/mm/init_64.c @@ -1098,7 +1098,14 @@ static int __init grab_mblocks(struct mdesc_handle *md) m->size = *val; val = mdesc_get_property(md, node, "address-congruence-offset", NULL); - m->offset = *val; + + /* The address-congruence-offset property is optional. + * Explicity zero it be identifty this. + */ + if (val) + m->offset = *val; + else + m->offset = 0UL; numadbg("MBLOCK[%d]: base[%llx] size[%llx] offset[%llx]\n", count - 1, m->base, m->size, m->offset); -- cgit v0.10.2 From f670758f5b829169562e1016a72af0c59360a541 Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Mon, 17 Jun 2013 14:37:44 +0530 Subject: sparc,leon: Convert to use devm_ioremap_resource Commit 75096579c3ac ("lib: devres: Introduce devm_ioremap_resource()") introduced devm_ioremap_resource() and deprecated the use of devm_request_and_ioremap(). While at it, also remove the error message as devm_ioremap_resource() also prints similar error message. Signed-off-by: Tushar Behera CC: sparclinux@vger.kernel.org CC: "David S. Miller" Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/leon_pci_grpci1.c b/arch/sparc/kernel/leon_pci_grpci1.c index 7739a54..6df26e3 100644 --- a/arch/sparc/kernel/leon_pci_grpci1.c +++ b/arch/sparc/kernel/leon_pci_grpci1.c @@ -536,11 +536,9 @@ static int grpci1_of_probe(struct platform_device *ofdev) /* find device register base address */ res = platform_get_resource(ofdev, IORESOURCE_MEM, 0); - regs = devm_request_and_ioremap(&ofdev->dev, res); - if (!regs) { - dev_err(&ofdev->dev, "io-regs mapping failed\n"); - return -EADDRNOTAVAIL; - } + regs = devm_ioremap_resource(&ofdev->dev, res); + if (IS_ERR(regs)) + return PTR_ERR(regs); /* * check that we're in Host Slot and that we can act as a Host Bridge -- cgit v0.10.2 From 23a01138efe216f8084cfaa74b0b90dd4b097441 Mon Sep 17 00:00:00 2001 From: Dave Kleikamp Date: Tue, 18 Jun 2013 09:05:36 -0500 Subject: sparc: tsb must be flushed before tlb This fixes a race where a cpu may re-load a tlb from a stale tsb right after it has been flushed by a remote function call. I still see some instability when stressing the system with parallel kernel builds while creating memory pressure by writing to /proc/sys/vm/nr_hugepages, but this patch improves the stability significantly. Signed-off-by: Dave Kleikamp Acked-by: Bob Picco Signed-off-by: David S. Miller diff --git a/arch/sparc/mm/tlb.c b/arch/sparc/mm/tlb.c index 83d89bc..37e7bc4 100644 --- a/arch/sparc/mm/tlb.c +++ b/arch/sparc/mm/tlb.c @@ -85,8 +85,8 @@ static void tlb_batch_add_one(struct mm_struct *mm, unsigned long vaddr, } if (!tb->active) { - global_flush_tlb_page(mm, vaddr); flush_tsb_user_page(mm, vaddr); + global_flush_tlb_page(mm, vaddr); goto out; } -- cgit v0.10.2 From f8941fbe204fa2fb51e7acd8bfd0f51225fe03b4 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Tue, 11 Jun 2013 11:38:31 -0500 Subject: kvm/ppc/booke: Delay kvmppc_lazy_ee_enable kwmppc_lazy_ee_enable() should be called as late as possible, or else we get things like WARN_ON(preemptible()) in enable_kernel_fp() in configurations where preemptible() works. Note that book3s_pr already waits until just before __kvmppc_vcpu_run to call kvmppc_lazy_ee_enable(). Signed-off-by: Scott Wood Signed-off-by: Paolo Bonzini diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c index 5cd7ad0..1a1b511 100644 --- a/arch/powerpc/kvm/booke.c +++ b/arch/powerpc/kvm/booke.c @@ -673,7 +673,6 @@ int kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu) ret = s; goto out; } - kvmppc_lazy_ee_enable(); kvm_guest_enter(); @@ -699,6 +698,8 @@ int kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu) kvmppc_load_guest_fp(vcpu); #endif + kvmppc_lazy_ee_enable(); + ret = __kvmppc_vcpu_run(kvm_run, vcpu); /* No need for kvm_guest_exit. It's done in handle_exit. -- cgit v0.10.2 From 07868fc6aaf57847b0f3a3d53086b7556eb83f4a Mon Sep 17 00:00:00 2001 From: Igor Mammedov Date: Mon, 10 Jun 2013 18:31:11 +0200 Subject: x86: kvmclock: zero initialize pvclock shared memory area kernel might hung in pvclock_clocksource_read() due to uninitialized memory might contain odd version value in following cycle: do { version = __pvclock_read_cycles(src, &ret, &flags); } while ((src->version & 1) || version != src->version); if secondary kvmclock is accessed before it's registered with kvm. Clear garbage in pvclock shared memory area right after it's allocated to avoid this issue. Ref: https://bugzilla.kernel.org/show_bug.cgi?id=59521 Signed-off-by: Igor Mammedov [See BZ for analysis. We may want a different fix for 3.11, but this is the safest for now - Paolo] Cc: # 3.8 Signed-off-by: Paolo Bonzini diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c index d2c3812..3dd37eb 100644 --- a/arch/x86/kernel/kvmclock.c +++ b/arch/x86/kernel/kvmclock.c @@ -242,6 +242,7 @@ void __init kvmclock_init(void) if (!mem) return; hv_clock = __va(mem); + memset(hv_clock, 0, size); if (kvm_register_clock("boot clock")) { hv_clock = NULL; -- cgit v0.10.2 From 9bb5d40cd93c9dd4be74834b1dcb1ba03629716b Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 4 Jun 2013 10:44:21 +0200 Subject: perf: Fix mmap() accounting hole Vince's fuzzer once again found holes. This time it spotted a leak in the locked page accounting. When an event had redirected output and its close() was the last reference to the buffer we didn't have a vm context to undo accounting. Change the code to destroy the buffer on the last munmap() and detach all redirected events at that time. This provides us the right context to undo the vm accounting. Reported-and-tested-by: Vince Weaver Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20130604084421.GI8923@twins.programming.kicks-ass.net Cc: Signed-off-by: Ingo Molnar diff --git a/kernel/events/core.c b/kernel/events/core.c index ae752cd..b391907 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -196,9 +196,6 @@ static void cpu_ctx_sched_in(struct perf_cpu_context *cpuctx, static void update_context_time(struct perf_event_context *ctx); static u64 perf_event_time(struct perf_event *event); -static void ring_buffer_attach(struct perf_event *event, - struct ring_buffer *rb); - void __weak perf_event_print_debug(void) { } extern __weak const char *perf_pmu_name(void) @@ -2917,7 +2914,8 @@ static void free_event_rcu(struct rcu_head *head) kfree(event); } -static bool ring_buffer_put(struct ring_buffer *rb); +static void ring_buffer_put(struct ring_buffer *rb); +static void ring_buffer_detach(struct perf_event *event, struct ring_buffer *rb); static void free_event(struct perf_event *event) { @@ -2942,15 +2940,30 @@ static void free_event(struct perf_event *event) if (has_branch_stack(event)) { static_key_slow_dec_deferred(&perf_sched_events); /* is system-wide event */ - if (!(event->attach_state & PERF_ATTACH_TASK)) + if (!(event->attach_state & PERF_ATTACH_TASK)) { atomic_dec(&per_cpu(perf_branch_stack_events, event->cpu)); + } } } if (event->rb) { - ring_buffer_put(event->rb); - event->rb = NULL; + struct ring_buffer *rb; + + /* + * Can happen when we close an event with re-directed output. + * + * Since we have a 0 refcount, perf_mmap_close() will skip + * over us; possibly making our ring_buffer_put() the last. + */ + mutex_lock(&event->mmap_mutex); + rb = event->rb; + if (rb) { + rcu_assign_pointer(event->rb, NULL); + ring_buffer_detach(event, rb); + ring_buffer_put(rb); /* could be last */ + } + mutex_unlock(&event->mmap_mutex); } if (is_cgroup_event(event)) @@ -3188,30 +3201,13 @@ static unsigned int perf_poll(struct file *file, poll_table *wait) unsigned int events = POLL_HUP; /* - * Race between perf_event_set_output() and perf_poll(): perf_poll() - * grabs the rb reference but perf_event_set_output() overrides it. - * Here is the timeline for two threads T1, T2: - * t0: T1, rb = rcu_dereference(event->rb) - * t1: T2, old_rb = event->rb - * t2: T2, event->rb = new rb - * t3: T2, ring_buffer_detach(old_rb) - * t4: T1, ring_buffer_attach(rb1) - * t5: T1, poll_wait(event->waitq) - * - * To avoid this problem, we grab mmap_mutex in perf_poll() - * thereby ensuring that the assignment of the new ring buffer - * and the detachment of the old buffer appear atomic to perf_poll() + * Pin the event->rb by taking event->mmap_mutex; otherwise + * perf_event_set_output() can swizzle our rb and make us miss wakeups. */ mutex_lock(&event->mmap_mutex); - - rcu_read_lock(); - rb = rcu_dereference(event->rb); - if (rb) { - ring_buffer_attach(event, rb); + rb = event->rb; + if (rb) events = atomic_xchg(&rb->poll, 0); - } - rcu_read_unlock(); - mutex_unlock(&event->mmap_mutex); poll_wait(file, &event->waitq, wait); @@ -3521,16 +3517,12 @@ static void ring_buffer_attach(struct perf_event *event, return; spin_lock_irqsave(&rb->event_lock, flags); - if (!list_empty(&event->rb_entry)) - goto unlock; - - list_add(&event->rb_entry, &rb->event_list); -unlock: + if (list_empty(&event->rb_entry)) + list_add(&event->rb_entry, &rb->event_list); spin_unlock_irqrestore(&rb->event_lock, flags); } -static void ring_buffer_detach(struct perf_event *event, - struct ring_buffer *rb) +static void ring_buffer_detach(struct perf_event *event, struct ring_buffer *rb) { unsigned long flags; @@ -3549,13 +3541,10 @@ static void ring_buffer_wakeup(struct perf_event *event) rcu_read_lock(); rb = rcu_dereference(event->rb); - if (!rb) - goto unlock; - - list_for_each_entry_rcu(event, &rb->event_list, rb_entry) - wake_up_all(&event->waitq); - -unlock: + if (rb) { + list_for_each_entry_rcu(event, &rb->event_list, rb_entry) + wake_up_all(&event->waitq); + } rcu_read_unlock(); } @@ -3582,23 +3571,14 @@ static struct ring_buffer *ring_buffer_get(struct perf_event *event) return rb; } -static bool ring_buffer_put(struct ring_buffer *rb) +static void ring_buffer_put(struct ring_buffer *rb) { - struct perf_event *event, *n; - unsigned long flags; - if (!atomic_dec_and_test(&rb->refcount)) - return false; + return; - spin_lock_irqsave(&rb->event_lock, flags); - list_for_each_entry_safe(event, n, &rb->event_list, rb_entry) { - list_del_init(&event->rb_entry); - wake_up_all(&event->waitq); - } - spin_unlock_irqrestore(&rb->event_lock, flags); + WARN_ON_ONCE(!list_empty(&rb->event_list)); call_rcu(&rb->rcu_head, rb_free_rcu); - return true; } static void perf_mmap_open(struct vm_area_struct *vma) @@ -3606,28 +3586,100 @@ static void perf_mmap_open(struct vm_area_struct *vma) struct perf_event *event = vma->vm_file->private_data; atomic_inc(&event->mmap_count); + atomic_inc(&event->rb->mmap_count); } +/* + * A buffer can be mmap()ed multiple times; either directly through the same + * event, or through other events by use of perf_event_set_output(). + * + * In order to undo the VM accounting done by perf_mmap() we need to destroy + * the buffer here, where we still have a VM context. This means we need + * to detach all events redirecting to us. + */ static void perf_mmap_close(struct vm_area_struct *vma) { struct perf_event *event = vma->vm_file->private_data; - if (atomic_dec_and_mutex_lock(&event->mmap_count, &event->mmap_mutex)) { - struct ring_buffer *rb = event->rb; - struct user_struct *mmap_user = rb->mmap_user; - int mmap_locked = rb->mmap_locked; - unsigned long size = perf_data_size(rb); + struct ring_buffer *rb = event->rb; + struct user_struct *mmap_user = rb->mmap_user; + int mmap_locked = rb->mmap_locked; + unsigned long size = perf_data_size(rb); - rcu_assign_pointer(event->rb, NULL); - ring_buffer_detach(event, rb); - mutex_unlock(&event->mmap_mutex); + atomic_dec(&rb->mmap_count); + + if (!atomic_dec_and_mutex_lock(&event->mmap_count, &event->mmap_mutex)) + return; + + /* Detach current event from the buffer. */ + rcu_assign_pointer(event->rb, NULL); + ring_buffer_detach(event, rb); + mutex_unlock(&event->mmap_mutex); + + /* If there's still other mmap()s of this buffer, we're done. */ + if (atomic_read(&rb->mmap_count)) { + ring_buffer_put(rb); /* can't be last */ + return; + } - if (ring_buffer_put(rb)) { - atomic_long_sub((size >> PAGE_SHIFT) + 1, &mmap_user->locked_vm); - vma->vm_mm->pinned_vm -= mmap_locked; - free_uid(mmap_user); + /* + * No other mmap()s, detach from all other events that might redirect + * into the now unreachable buffer. Somewhat complicated by the + * fact that rb::event_lock otherwise nests inside mmap_mutex. + */ +again: + rcu_read_lock(); + list_for_each_entry_rcu(event, &rb->event_list, rb_entry) { + if (!atomic_long_inc_not_zero(&event->refcount)) { + /* + * This event is en-route to free_event() which will + * detach it and remove it from the list. + */ + continue; } + rcu_read_unlock(); + + mutex_lock(&event->mmap_mutex); + /* + * Check we didn't race with perf_event_set_output() which can + * swizzle the rb from under us while we were waiting to + * acquire mmap_mutex. + * + * If we find a different rb; ignore this event, a next + * iteration will no longer find it on the list. We have to + * still restart the iteration to make sure we're not now + * iterating the wrong list. + */ + if (event->rb == rb) { + rcu_assign_pointer(event->rb, NULL); + ring_buffer_detach(event, rb); + ring_buffer_put(rb); /* can't be last, we still have one */ + } + mutex_unlock(&event->mmap_mutex); + put_event(event); + + /* + * Restart the iteration; either we're on the wrong list or + * destroyed its integrity by doing a deletion. + */ + goto again; } + rcu_read_unlock(); + + /* + * It could be there's still a few 0-ref events on the list; they'll + * get cleaned up by free_event() -- they'll also still have their + * ref on the rb and will free it whenever they are done with it. + * + * Aside from that, this buffer is 'fully' detached and unmapped, + * undo the VM accounting. + */ + + atomic_long_sub((size >> PAGE_SHIFT) + 1, &mmap_user->locked_vm); + vma->vm_mm->pinned_vm -= mmap_locked; + free_uid(mmap_user); + + ring_buffer_put(rb); /* could be last */ } static const struct vm_operations_struct perf_mmap_vmops = { @@ -3677,10 +3729,24 @@ static int perf_mmap(struct file *file, struct vm_area_struct *vma) return -EINVAL; WARN_ON_ONCE(event->ctx->parent_ctx); +again: mutex_lock(&event->mmap_mutex); if (event->rb) { - if (event->rb->nr_pages != nr_pages) + if (event->rb->nr_pages != nr_pages) { ret = -EINVAL; + goto unlock; + } + + if (!atomic_inc_not_zero(&event->rb->mmap_count)) { + /* + * Raced against perf_mmap_close() through + * perf_event_set_output(). Try again, hope for better + * luck. + */ + mutex_unlock(&event->mmap_mutex); + goto again; + } + goto unlock; } @@ -3722,12 +3788,14 @@ static int perf_mmap(struct file *file, struct vm_area_struct *vma) goto unlock; } + atomic_set(&rb->mmap_count, 1); rb->mmap_locked = extra; rb->mmap_user = get_current_user(); atomic_long_add(user_extra, &user->locked_vm); vma->vm_mm->pinned_vm += extra; + ring_buffer_attach(event, rb); rcu_assign_pointer(event->rb, rb); perf_event_update_userpage(event); @@ -3737,6 +3805,10 @@ unlock: atomic_inc(&event->mmap_count); mutex_unlock(&event->mmap_mutex); + /* + * Since pinned accounting is per vm we cannot allow fork() to copy our + * vma. + */ vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND | VM_DONTDUMP; vma->vm_ops = &perf_mmap_vmops; @@ -6415,6 +6487,8 @@ set: if (atomic_read(&event->mmap_count)) goto unlock; + old_rb = event->rb; + if (output_event) { /* get the rb we want to redirect to */ rb = ring_buffer_get(output_event); @@ -6422,16 +6496,28 @@ set: goto unlock; } - old_rb = event->rb; - rcu_assign_pointer(event->rb, rb); if (old_rb) ring_buffer_detach(event, old_rb); + + if (rb) + ring_buffer_attach(event, rb); + + rcu_assign_pointer(event->rb, rb); + + if (old_rb) { + ring_buffer_put(old_rb); + /* + * Since we detached before setting the new rb, so that we + * could attach the new rb, we could have missed a wakeup. + * Provide it now. + */ + wake_up_all(&event->waitq); + } + ret = 0; unlock: mutex_unlock(&event->mmap_mutex); - if (old_rb) - ring_buffer_put(old_rb); out: return ret; } diff --git a/kernel/events/internal.h b/kernel/events/internal.h index 5bc6c8e..ca65997 100644 --- a/kernel/events/internal.h +++ b/kernel/events/internal.h @@ -31,7 +31,8 @@ struct ring_buffer { spinlock_t event_lock; struct list_head event_list; - int mmap_locked; + atomic_t mmap_count; + unsigned long mmap_locked; struct user_struct *mmap_user; struct perf_event_mmap_page *user_page; -- cgit v0.10.2 From f1a527899ef0a8a241eb3bea619eb2e29d797f44 Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Fri, 7 Jun 2013 23:22:10 +0200 Subject: perf/x86: Fix broken PEBS-LL support on SNB-EP/IVB-EP This patch fixes broken support of PEBS-LL on SNB-EP/IVB-EP. For some reason, the LDLAT extra reg definition for snb_ep showed up as duplicate in the snb table. This patch moves the definition of LDLAT back into the snb_ep table. Thanks to Don Zickus for tracking this one down. Signed-off-by: Stephane Eranian Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20130607212210.GA11849@quad Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index f60d41f..a9e2207 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -165,13 +165,13 @@ static struct extra_reg intel_snb_extra_regs[] __read_mostly = { INTEL_EVENT_EXTRA_REG(0xb7, MSR_OFFCORE_RSP_0, 0x3f807f8fffull, RSP_0), INTEL_EVENT_EXTRA_REG(0xbb, MSR_OFFCORE_RSP_1, 0x3f807f8fffull, RSP_1), INTEL_UEVENT_PEBS_LDLAT_EXTRA_REG(0x01cd), - INTEL_UEVENT_PEBS_LDLAT_EXTRA_REG(0x01cd), EVENT_EXTRA_END }; static struct extra_reg intel_snbep_extra_regs[] __read_mostly = { INTEL_EVENT_EXTRA_REG(0xb7, MSR_OFFCORE_RSP_0, 0x3fffff8fffull, RSP_0), INTEL_EVENT_EXTRA_REG(0xbb, MSR_OFFCORE_RSP_1, 0x3fffff8fffull, RSP_1), + INTEL_UEVENT_PEBS_LDLAT_EXTRA_REG(0x01cd), EVENT_EXTRA_END }; -- cgit v0.10.2 From 873b4c65b519fd769940eb281f77848227d4e5c1 Mon Sep 17 00:00:00 2001 From: Vincent Guittot Date: Wed, 5 Jun 2013 10:13:11 +0200 Subject: sched: Fix clear NOHZ_BALANCE_KICK I have faced a sequence where the Idle Load Balance was sometime not triggered for a while on my platform, in the following scenario: CPU 0 and CPU 1 are running tasks and CPU 2 is idle CPU 1 kicks the Idle Load Balance CPU 1 selects CPU 2 as the new Idle Load Balancer CPU 2 sets NOHZ_BALANCE_KICK for CPU 2 CPU 2 sends a reschedule IPI to CPU 2 While CPU 3 wakes up, CPU 0 or CPU 1 migrates a waking up task A on CPU 2 CPU 2 finally wakes up, runs task A and discards the Idle Load Balance task A quickly goes back to sleep (before a tick occurs on CPU 2) CPU 2 goes back to idle with NOHZ_BALANCE_KICK set Whenever CPU 2 will be selected as the ILB, no reschedule IPI will be sent because NOHZ_BALANCE_KICK is already set and no Idle Load Balance will be performed. We must wait for the sched softirq to be raised on CPU 2 thanks to another part the kernel to come back to clear NOHZ_BALANCE_KICK. The proposed solution clears NOHZ_BALANCE_KICK in schedule_ipi if we can't raise the sched_softirq for the Idle Load Balance. Change since V1: - move the clear of NOHZ_BALANCE_KICK in got_nohz_idle_kick if the ILB can't run on this CPU (as suggested by Peter) Signed-off-by: Vincent Guittot Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1370419991-13870-1-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 58453b8..919bee6 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -633,7 +633,19 @@ void wake_up_nohz_cpu(int cpu) static inline bool got_nohz_idle_kick(void) { int cpu = smp_processor_id(); - return idle_cpu(cpu) && test_bit(NOHZ_BALANCE_KICK, nohz_flags(cpu)); + + if (!test_bit(NOHZ_BALANCE_KICK, nohz_flags(cpu))) + return false; + + if (idle_cpu(cpu) && !need_resched()) + return true; + + /* + * We can't run Idle Load Balance on this CPU for this time so we + * cancel it and clear NOHZ_BALANCE_KICK + */ + clear_bit(NOHZ_BALANCE_KICK, nohz_flags(cpu)); + return false; } #else /* CONFIG_NO_HZ_COMMON */ @@ -1393,8 +1405,9 @@ static void sched_ttwu_pending(void) void scheduler_ipi(void) { - if (llist_empty(&this_rq()->wake_list) && !got_nohz_idle_kick() - && !tick_nohz_full_cpu(smp_processor_id())) + if (llist_empty(&this_rq()->wake_list) + && !tick_nohz_full_cpu(smp_processor_id()) + && !got_nohz_idle_kick()) return; /* @@ -1417,7 +1430,7 @@ void scheduler_ipi(void) /* * Check if someone kicked us for doing the nohz idle load balance. */ - if (unlikely(got_nohz_idle_kick() && !need_resched())) { + if (unlikely(got_nohz_idle_kick())) { this_rq()->idle_balance = 1; raise_softirq_irqoff(SCHED_SOFTIRQ); } -- cgit v0.10.2 From 29bb9e5a75684106a37593ad75ec75ff8312731b Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 24 May 2013 15:23:40 -0400 Subject: tracing/context-tracking: Add preempt_schedule_context() for tracing Dave Jones hit the following bug report: =============================== [ INFO: suspicious RCU usage. ] 3.10.0-rc2+ #1 Not tainted ------------------------------- include/linux/rcupdate.h:771 rcu_read_lock() used illegally while idle! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 RCU used illegally from extended quiescent state! 2 locks held by cc1/63645: #0: (&rq->lock){-.-.-.}, at: [] __schedule+0xed/0x9b0 #1: (rcu_read_lock){.+.+..}, at: [] cpuacct_charge+0x5/0x1f0 CPU: 1 PID: 63645 Comm: cc1 Not tainted 3.10.0-rc2+ #1 [loadavg: 40.57 27.55 13.39 25/277 64369] Hardware name: Gigabyte Technology Co., Ltd. GA-MA78GM-S2H/GA-MA78GM-S2H, BIOS F12a 04/23/2010 0000000000000000 ffff88010f78fcf8 ffffffff816ae383 ffff88010f78fd28 ffffffff810b698d ffff88011c092548 000000000023d073 ffff88011c092500 0000000000000001 ffff88010f78fd60 ffffffff8109d7c5 ffffffff8109d645 Call Trace: [] dump_stack+0x19/0x1b [] lockdep_rcu_suspicious+0xfd/0x130 [] cpuacct_charge+0x185/0x1f0 [] ? cpuacct_charge+0x5/0x1f0 [] update_curr+0xec/0x240 [] put_prev_task_fair+0x228/0x480 [] __schedule+0x161/0x9b0 [] preempt_schedule+0x51/0x80 [] ? __cond_resched_softirq+0x60/0x60 [] ? retint_careful+0x12/0x2e [] ftrace_ops_control_func+0x1dc/0x210 [] ftrace_call+0x5/0x2f [] ? retint_careful+0xb/0x2e [] ? schedule_user+0x5/0x70 [] ? schedule_user+0x5/0x70 [] ? retint_careful+0x12/0x2e ------------[ cut here ]------------ What happened was that the function tracer traced the schedule_user() code that tells RCU that the system is coming back from userspace, and to add the CPU back to the RCU monitoring. Because the function tracer does a preempt_disable/enable_notrace() calls the preempt_enable_notrace() checks the NEED_RESCHED flag. If it is set, then preempt_schedule() is called. But this is called before the user_exit() function can inform the kernel that the CPU is no longer in user mode and needs to be accounted for by RCU. The fix is to create a new preempt_schedule_context() that checks if the kernel is still in user mode and if so to switch it to kernel mode before calling schedule. It also switches back to user mode coming back from schedule in need be. The only user of this currently is the preempt_enable_notrace(), which is only used by the tracing subsystem. Signed-off-by: Steven Rostedt Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1369423420.6828.226.camel@gandalf.local.home Signed-off-by: Ingo Molnar diff --git a/include/linux/preempt.h b/include/linux/preempt.h index 87a03c7..f5d4723 100644 --- a/include/linux/preempt.h +++ b/include/linux/preempt.h @@ -33,9 +33,25 @@ do { \ preempt_schedule(); \ } while (0) +#ifdef CONFIG_CONTEXT_TRACKING + +void preempt_schedule_context(void); + +#define preempt_check_resched_context() \ +do { \ + if (unlikely(test_thread_flag(TIF_NEED_RESCHED))) \ + preempt_schedule_context(); \ +} while (0) +#else + +#define preempt_check_resched_context() preempt_check_resched() + +#endif /* CONFIG_CONTEXT_TRACKING */ + #else /* !CONFIG_PREEMPT */ #define preempt_check_resched() do { } while (0) +#define preempt_check_resched_context() do { } while (0) #endif /* CONFIG_PREEMPT */ @@ -88,7 +104,7 @@ do { \ do { \ preempt_enable_no_resched_notrace(); \ barrier(); \ - preempt_check_resched(); \ + preempt_check_resched_context(); \ } while (0) #else /* !CONFIG_PREEMPT_COUNT */ diff --git a/kernel/context_tracking.c b/kernel/context_tracking.c index 65349f0..6667700 100644 --- a/kernel/context_tracking.c +++ b/kernel/context_tracking.c @@ -71,6 +71,46 @@ void user_enter(void) local_irq_restore(flags); } +#ifdef CONFIG_PREEMPT +/** + * preempt_schedule_context - preempt_schedule called by tracing + * + * The tracing infrastructure uses preempt_enable_notrace to prevent + * recursion and tracing preempt enabling caused by the tracing + * infrastructure itself. But as tracing can happen in areas coming + * from userspace or just about to enter userspace, a preempt enable + * can occur before user_exit() is called. This will cause the scheduler + * to be called when the system is still in usermode. + * + * To prevent this, the preempt_enable_notrace will use this function + * instead of preempt_schedule() to exit user context if needed before + * calling the scheduler. + */ +void __sched notrace preempt_schedule_context(void) +{ + struct thread_info *ti = current_thread_info(); + enum ctx_state prev_ctx; + + if (likely(ti->preempt_count || irqs_disabled())) + return; + + /* + * Need to disable preemption in case user_exit() is traced + * and the tracer calls preempt_enable_notrace() causing + * an infinite recursion. + */ + preempt_disable_notrace(); + prev_ctx = exception_enter(); + preempt_enable_no_resched_notrace(); + + preempt_schedule(); + + preempt_disable_notrace(); + exception_exit(prev_ctx); + preempt_enable_notrace(); +} +EXPORT_SYMBOL_GPL(preempt_schedule_context); +#endif /* CONFIG_PREEMPT */ /** * user_exit - Inform the context tracking that the CPU is -- cgit v0.10.2 From 722a860ecb29aa34ec6f7d7f32b949209e86a2f3 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 14 Jun 2013 10:44:30 -0300 Subject: [media] exynos4-is: Fix FIMC-IS clocks initialization The ISP clock register content is not preserved over the ISP power domain off/on cycle. Instead of setting the clock frequencies once at probe time the clock rates set up is moved to the runtime_resume handler, which is invoked after the related power domain is already enabled, ensuring the clocks are properly configured when the device is actively used. This fixes the FIMC-IS malfunctions and STREAM ON timeout errors accuring on some boards: [ 59.860000] fimc_is_general_irq_handler:583 ISR_NDONE: 5: 0x800003e8, IS_ERROR_UNKNOWN [ 59.860000] fimc_is_general_irq_handler:586 IS_ERROR_TIME_OUT Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park diff --git a/drivers/media/platform/exynos4-is/fimc-is.c b/drivers/media/platform/exynos4-is/fimc-is.c index 520e439..0741945 100644 --- a/drivers/media/platform/exynos4-is/fimc-is.c +++ b/drivers/media/platform/exynos4-is/fimc-is.c @@ -834,23 +834,11 @@ static int fimc_is_probe(struct platform_device *pdev) goto err_clk; } pm_runtime_enable(dev); - /* - * Enable only the ISP power domain, keep FIMC-IS clocks off until - * the whole clock tree is configured. The ISP power domain needs - * be active in order to acces any CMU_ISP clock registers. - */ - ret = pm_runtime_get_sync(dev); - if (ret < 0) - goto err_irq; - - ret = fimc_is_setup_clocks(is); - pm_runtime_put_sync(dev); + ret = pm_runtime_get_sync(dev); if (ret < 0) goto err_irq; - is->clk_init = true; - is->alloc_ctx = vb2_dma_contig_init_ctx(dev); if (IS_ERR(is->alloc_ctx)) { ret = PTR_ERR(is->alloc_ctx); @@ -872,6 +860,8 @@ static int fimc_is_probe(struct platform_device *pdev) if (ret < 0) goto err_dfs; + pm_runtime_put_sync(dev); + dev_dbg(dev, "FIMC-IS registered successfully\n"); return 0; @@ -891,9 +881,11 @@ err_clk: static int fimc_is_runtime_resume(struct device *dev) { struct fimc_is *is = dev_get_drvdata(dev); + int ret; - if (!is->clk_init) - return 0; + ret = fimc_is_setup_clocks(is); + if (ret) + return ret; return fimc_is_enable_clocks(is); } @@ -902,9 +894,7 @@ static int fimc_is_runtime_suspend(struct device *dev) { struct fimc_is *is = dev_get_drvdata(dev); - if (is->clk_init) - fimc_is_disable_clocks(is); - + fimc_is_disable_clocks(is); return 0; } diff --git a/drivers/media/platform/exynos4-is/fimc-is.h b/drivers/media/platform/exynos4-is/fimc-is.h index 606a7c9..d7db133 100644 --- a/drivers/media/platform/exynos4-is/fimc-is.h +++ b/drivers/media/platform/exynos4-is/fimc-is.h @@ -264,7 +264,6 @@ struct fimc_is { spinlock_t slock; struct clk *clocks[ISS_CLKS_MAX]; - bool clk_init; void __iomem *regs; void __iomem *pmu_regs; int irq; -- cgit v0.10.2 From 35b03aec919c952e67b0b093638e0d79b468f9bc Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 19 Jun 2013 09:16:54 +0200 Subject: s390/mem_detect: fix memory hole handling With git commit 996b4a7d "s390/mem_detect: remove artificial kdump memory types" the memory detection code got simplified. As a side effect the array that describes memory chunks may now contain empty (zeroed) entries. All call sites can handle this except for drivers/s390/char/zcore.c::zcore_memmap_open which has a really odd user space interface. The easiest fix is to change the memory hole handling code, so that no empty entries exist before the last valid entry is reached. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/mm/mem_detect.c b/arch/s390/mm/mem_detect.c index 3cbd3b8..cca3882 100644 --- a/arch/s390/mm/mem_detect.c +++ b/arch/s390/mm/mem_detect.c @@ -123,7 +123,8 @@ void create_mem_hole(struct mem_chunk mem_chunk[], unsigned long addr, continue; } else if ((addr <= chunk->addr) && (addr + size >= chunk->addr + chunk->size)) { - memset(chunk, 0 , sizeof(*chunk)); + memmove(chunk, chunk + 1, (MEMORY_CHUNKS-i-1) * sizeof(*chunk)); + memset(&mem_chunk[MEMORY_CHUNKS-1], 0, sizeof(*chunk)); } else if (addr + size < chunk->addr + chunk->size) { chunk->size = chunk->addr + chunk->size - addr - size; chunk->addr = addr + size; -- cgit v0.10.2 From 418a133b714352c35f050d59857f95f769d552d2 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Fri, 14 Jun 2013 10:31:01 +0100 Subject: metag: fix mm/hugetlb.c build breakage Commit 106c992a5ebe ("mm/hugetlb: add more arch-defined huge_pte functions") added an include of to each architecture's (except s390). Unfortunately metag was missed which resulted in build errors when hugetlbfs is enabled (see below). Add the include for metag too to fix the build errors: mm/hugetlb.c In function 'make_huge_pte': mm/hugetlb.c +2250 : error: implicit declaration of function 'huge_pte_mkwrite' mm/hugetlb.c +2250 : error: implicit declaration of function 'huge_pte_mkdirty' ... Signed-off-by: James Hogan Cc: Gerald Schaefer Cc: Andrew Morton Cc: Michal Hocko Signed-off-by: Linus Torvalds diff --git a/arch/metag/include/asm/hugetlb.h b/arch/metag/include/asm/hugetlb.h index f545477..471f481 100644 --- a/arch/metag/include/asm/hugetlb.h +++ b/arch/metag/include/asm/hugetlb.h @@ -2,6 +2,7 @@ #define _ASM_METAG_HUGETLB_H #include +#include static inline int is_hugepage_only_range(struct mm_struct *mm, -- cgit v0.10.2 From c0691143dfe1d42ec9bd89de5921ccb6a27ea1b3 Mon Sep 17 00:00:00 2001 From: David Daney Date: Mon, 17 Jun 2013 08:46:07 -0700 Subject: mn10300: Fix include dependency in irqflags.h et al. We need to pick up the definition of raw_smp_processor_id() from asm/smp.h. For the !SMP case, we need to supply a definition of raw_smp_processor_id(). Because of the include dependencies we cannot use smp_call_func_t in asm/smp.h, but we do need linux/thread_info.h Signed-off-by: David Daney Acked-by: Geert Uytterhoeven Acked-by: David Howells Signed-off-by: Linus Torvalds diff --git a/arch/mn10300/include/asm/irqflags.h b/arch/mn10300/include/asm/irqflags.h index 678f68d..8730c0a 100644 --- a/arch/mn10300/include/asm/irqflags.h +++ b/arch/mn10300/include/asm/irqflags.h @@ -13,9 +13,8 @@ #define _ASM_IRQFLAGS_H #include -#ifndef __ASSEMBLY__ -#include -#endif +/* linux/smp.h <- linux/irqflags.h needs asm/smp.h first */ +#include /* * interrupt control diff --git a/arch/mn10300/include/asm/smp.h b/arch/mn10300/include/asm/smp.h index 6745dbe..56c4241 100644 --- a/arch/mn10300/include/asm/smp.h +++ b/arch/mn10300/include/asm/smp.h @@ -24,6 +24,7 @@ #ifndef __ASSEMBLY__ #include #include +#include #endif #ifdef CONFIG_SMP @@ -85,7 +86,7 @@ extern cpumask_t cpu_boot_map; extern void smp_init_cpus(void); extern void smp_cache_interrupt(void); extern void send_IPI_allbutself(int irq); -extern int smp_nmi_call_function(smp_call_func_t func, void *info, int wait); +extern int smp_nmi_call_function(void (*func)(void *), void *info, int wait); extern void arch_send_call_function_single_ipi(int cpu); extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); @@ -100,6 +101,7 @@ extern void __cpu_die(unsigned int cpu); #ifndef __ASSEMBLY__ static inline void smp_init_cpus(void) {} +#define raw_smp_processor_id() 0 #endif /* __ASSEMBLY__ */ #endif /* CONFIG_SMP */ -- cgit v0.10.2 From 949785996ec2250fa958fc3a924e5186e9a8fa2c Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 19 Jun 2013 11:15:26 -0400 Subject: x86: Fix section mismatch on load_ucode_ap We are in the process of removing all the __cpuinit annotations. While working on making that change, an existing problem was made evident: WARNING: arch/x86/kernel/built-in.o(.text+0x198f2): Section mismatch in reference from the function cpu_init() to the function .init.text:load_ucode_ap() The function cpu_init() references the function __init load_ucode_ap(). This is often because cpu_init lacks a __init annotation or the annotation of load_ucode_ap is wrong. This now appears because in my working tree, cpu_init() is no longer tagged as __cpuinit, and so the audit picks up the mismatch. The 2nd hypothesis from the audit is the correct one, as there was an incorrect __init tag on the prototype in the header (but __cpuinit was used on the function itself.) The audit is telling us that the prototype's __init annotation took effect and the function did land in the .init.text section. Checking with objdump on a mainline tree that still has __cpuinit shows that the __cpuinit on the function takes precedence over the __init on the prototype, but that won't be true once we make __cpuinit a no-op. Even though we are removing __cpuinit, we temporarily align both the function and the prototype on __cpuinit so that the changeset can be applied to stable trees if desired. [ hpa: build fix only, no object code change ] Cc: Thomas Gleixner Cc: Ingo Molnar Cc: "H. Peter Anvin" Cc: stable # 3.9+ Signed-off-by: Paul Gortmaker Link: http://lkml.kernel.org/r/1371654926-11729-1-git-send-email-paul.gortmaker@windriver.com Signed-off-by: H. Peter Anvin diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h index 6825e2e..6bc3985 100644 --- a/arch/x86/include/asm/microcode.h +++ b/arch/x86/include/asm/microcode.h @@ -60,11 +60,11 @@ static inline void __exit exit_amd_microcode(void) {} #ifdef CONFIG_MICROCODE_EARLY #define MAX_UCODE_COUNT 128 extern void __init load_ucode_bsp(void); -extern __init void load_ucode_ap(void); +extern void __cpuinit load_ucode_ap(void); extern int __init save_microcode_in_initrd(void); #else static inline void __init load_ucode_bsp(void) {} -static inline __init void load_ucode_ap(void) {} +static inline void __cpuinit load_ucode_ap(void) {} static inline int __init save_microcode_in_initrd(void) { return 0; -- cgit v0.10.2 From 204ebc0aa30a7115f300cac39fbb7eeb66524881 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Mon, 20 May 2013 15:41:45 +0000 Subject: ACPI / resources: call acpi_get_override_irq() only for legacy IRQ resources acpi_get_override_irq() was added because there was a problem with buggy BIOSes passing wrong IRQ() resource for the RTC IRQ. The commit that added the workaround was 61fd47e0c8476 (ACPI: fix two IRQ8 issues in IOAPIC mode). With ACPI 5 enumerated devices there are typically one or more extended IRQ resources per device (and these IRQs can be shared). However, the acpi_get_override_irq() workaround forces all IRQs in range 0 - 15 (the legacy ISA IRQs) to be edge triggered, active high as can be seen from the dmesg below: ACPI: IRQ 6 override to edge, high ACPI: IRQ 7 override to edge, high ACPI: IRQ 7 override to edge, high ACPI: IRQ 13 override to edge, high Also /proc/interrupts for the I2C controllers (INT33C2 and INT33C3) shows the same thing: 7: 4 0 0 0 IO-APIC-edge INT33C2:00, INT33C3:00 The _CSR method for INT33C2 (and INT33C3) device returns following resource: Interrupt (ResourceConsumer, Level, ActiveLow, Shared,,, ) { 0x00000007, } which states that this is supposed to be level triggered, active low, shared IRQ instead. Fix this by making sure that acpi_get_override_irq() gets only called when we are dealing with legacy IRQ() or IRQNoFlags() descriptors. While we are there, correct pr_warning() to print the right triggering value. This change turns out to be necessary to make DMA work correctly on systems based on the Intel Lynxpoint PCH (Platform Controller Hub). [rjw: Changelog] Signed-off-by: Mika Westerberg Cc: 3.9+ Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c index a3868f6..3322b47 100644 --- a/drivers/acpi/resource.c +++ b/drivers/acpi/resource.c @@ -304,7 +304,8 @@ static void acpi_dev_irqresource_disabled(struct resource *res, u32 gsi) } static void acpi_dev_get_irqresource(struct resource *res, u32 gsi, - u8 triggering, u8 polarity, u8 shareable) + u8 triggering, u8 polarity, u8 shareable, + bool legacy) { int irq, p, t; @@ -317,14 +318,19 @@ static void acpi_dev_get_irqresource(struct resource *res, u32 gsi, * In IO-APIC mode, use overrided attribute. Two reasons: * 1. BIOS bug in DSDT * 2. BIOS uses IO-APIC mode Interrupt Source Override + * + * We do this only if we are dealing with IRQ() or IRQNoFlags() + * resource (the legacy ISA resources). With modern ACPI 5 devices + * using extended IRQ descriptors we take the IRQ configuration + * from _CRS directly. */ - if (!acpi_get_override_irq(gsi, &t, &p)) { + if (legacy && !acpi_get_override_irq(gsi, &t, &p)) { u8 trig = t ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE; u8 pol = p ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH; if (triggering != trig || polarity != pol) { pr_warning("ACPI: IRQ %d override to %s, %s\n", gsi, - t ? "edge" : "level", p ? "low" : "high"); + t ? "level" : "edge", p ? "low" : "high"); triggering = trig; polarity = pol; } @@ -373,7 +379,7 @@ bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index, } acpi_dev_get_irqresource(res, irq->interrupts[index], irq->triggering, irq->polarity, - irq->sharable); + irq->sharable, true); break; case ACPI_RESOURCE_TYPE_EXTENDED_IRQ: ext_irq = &ares->data.extended_irq; @@ -383,7 +389,7 @@ bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index, } acpi_dev_get_irqresource(res, ext_irq->interrupts[index], ext_irq->triggering, ext_irq->polarity, - ext_irq->sharable); + ext_irq->sharable, false); break; default: return false; -- cgit v0.10.2 From 8112006f41fd76ddf4988f8ddd904563db85613c Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 16 Jun 2013 00:38:30 +0200 Subject: ACPI / dock: Take ACPI scan lock in write_undock() Since commit 3757b94 (ACPI / hotplug: Fix concurrency issues and memory leaks) acpi_bus_scan() and acpi_bus_trim() must always be called under acpi_scan_lock, but currently the following scenario violating that requirement is possible: write_undock() handle_eject_request() hotplug_dock_devices() dock_remove_acpi_device() acpi_bus_trim() Fix that by making write_undock() acquire acpi_scan_lock before calling handle_eject_request() as appropriate (begin_undock() is under the lock too in analogy with acpi_dock_deferred_cb()). Signed-off-by: Rafael J. Wysocki Cc: 3.9+ Acked-by: Toshi Kani diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index 4fdea38..ec117c6 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -868,8 +868,10 @@ static ssize_t write_undock(struct device *dev, struct device_attribute *attr, if (!count) return -EINVAL; + acpi_scan_lock_acquire(); begin_undock(dock_station); ret = handle_eject_request(dock_station, ACPI_NOTIFY_EJECT_REQUEST); + acpi_scan_lock_release(); return ret ? ret: count; } static DEVICE_ATTR(undock, S_IWUSR, NULL, write_undock); -- cgit v0.10.2 From 6ee22e9d59151550a55d370b14109bdae8b58bda Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 19 Jun 2013 00:44:45 +0200 Subject: ACPI / PM: Fix error code path for power resources initialization Commit 781d737 (ACPI: Drop power resources driver) introduced a bug in the power resources initialization error code path causing a NULL pointer to be referenced in acpi_release_power_resource() if there's an error triggering a jump to the 'err' label in acpi_add_power_resource(). This happens because the list_node field of struct acpi_power_resource has not been initialized yet at this point and doing a list_del() on it is a bad idea. To prevent this problem from occuring, initialize the list_node field of struct acpi_power_resource upfront. Reported-by: Mika Westerberg Tested-by: Lan Tianyu Signed-off-by: Rafael J. Wysocki Cc: 3.9+ Acked-by: Yasuaki Ishimatsu Reviewed-by: Mika Westerberg diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index f962047..288bb27 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -885,6 +885,7 @@ int acpi_add_power_resource(acpi_handle handle) ACPI_STA_DEFAULT); mutex_init(&resource->resource_lock); INIT_LIST_HEAD(&resource->dependent); + INIT_LIST_HEAD(&resource->list_node); resource->name = device->pnp.bus_id; strcpy(acpi_device_name(device), ACPI_POWER_DEVICE_NAME); strcpy(acpi_device_class(device), ACPI_POWER_CLASS); -- cgit v0.10.2 From b9e95fc65ededbec083aa91b4faa58ad992c0891 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 19 Jun 2013 00:45:34 +0200 Subject: ACPI / LPSS: Power up LPSS devices during enumeration Commit 7cd8407 (ACPI / PM: Do not execute _PS0 for devices without _PSC during initialization) introduced a regression on some systems with Intel Lynxpoint Low-Power Subsystem (LPSS) where some devices need to be powered up during initialization, but their device objects in the ACPI namespace have _PS0 and _PS3 only (without _PSC or power resources). To work around this problem, make the ACPI LPSS driver power up devices it knows about by using a new helper function acpi_device_fix_up_power() that does all of the necessary sanity checks and calls acpi_dev_pm_explicit_set() to put the device into D0. Reported-and-tested-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index 652fd5c..cab13f2 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -164,15 +164,24 @@ static int acpi_lpss_create_device(struct acpi_device *adev, if (dev_desc->clk_required) { ret = register_device_clock(adev, pdata); if (ret) { - /* - * Skip the device, but don't terminate the namespace - * scan. - */ - kfree(pdata); - return 0; + /* Skip the device, but continue the namespace scan. */ + ret = 0; + goto err_out; } } + /* + * This works around a known issue in ACPI tables where LPSS devices + * have _PS0 and _PS3 without _PSC (and no power resources), so + * acpi_bus_init_power() will assume that the BIOS has put them into D0. + */ + ret = acpi_device_fix_up_power(adev); + if (ret) { + /* Skip the device, but continue the namespace scan. */ + ret = 0; + goto err_out; + } + adev->driver_data = pdata; ret = acpi_create_platform_device(adev, id); if (ret > 0) diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c index 318fa32..31c217a 100644 --- a/drivers/acpi/device_pm.c +++ b/drivers/acpi/device_pm.c @@ -290,6 +290,26 @@ int acpi_bus_init_power(struct acpi_device *device) return 0; } +/** + * acpi_device_fix_up_power - Force device with missing _PSC into D0. + * @device: Device object whose power state is to be fixed up. + * + * Devices without power resources and _PSC, but having _PS0 and _PS3 defined, + * are assumed to be put into D0 by the BIOS. However, in some cases that may + * not be the case and this function should be used then. + */ +int acpi_device_fix_up_power(struct acpi_device *device) +{ + int ret = 0; + + if (!device->power.flags.power_resources + && !device->power.flags.explicit_get + && device->power.state == ACPI_STATE_D0) + ret = acpi_dev_pm_explicit_set(device, ACPI_STATE_D0); + + return ret; +} + int acpi_bus_update_power(acpi_handle handle, int *state_p) { struct acpi_device *device; diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 636c59f..c13c919 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -382,6 +382,7 @@ const char *acpi_power_state_string(int state); int acpi_device_get_power(struct acpi_device *device, int *state); int acpi_device_set_power(struct acpi_device *device, int state); int acpi_bus_init_power(struct acpi_device *device); +int acpi_device_fix_up_power(struct acpi_device *device); int acpi_bus_update_power(acpi_handle handle, int *state_p); bool acpi_bus_power_manageable(acpi_handle handle); -- cgit v0.10.2 From 35a2fbc941accd0e9f1bfadd669311786118d874 Mon Sep 17 00:00:00 2001 From: Anders Hammarquist Date: Wed, 19 Jun 2013 01:45:48 +0200 Subject: USB: serial: ti_usb_3410_5052: new device id for Abbot strip port cable Add product id for Abbott strip port cable for Precision meter which uses the TI 3410 chip. Signed-off-by: Anders Hammarquist Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index c92c5ed..e581c25 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -172,7 +172,8 @@ static struct usb_device_id ti_id_table_3410[15+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) }, - { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) }, + { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STEREO_PLUG_ID) }, + { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) }, { USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) }, }; diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h index b353e7e..4a2423e 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.h +++ b/drivers/usb/serial/ti_usb_3410_5052.h @@ -52,7 +52,9 @@ /* Abbott Diabetics vendor and product ids */ #define ABBOTT_VENDOR_ID 0x1a61 -#define ABBOTT_PRODUCT_ID 0x3410 +#define ABBOTT_STEREO_PLUG_ID 0x3410 +#define ABBOTT_PRODUCT_ID ABBOTT_STEREO_PLUG_ID +#define ABBOTT_STRIP_PORT_ID 0x3420 /* Commands */ #define TI_GET_VERSION 0x01 -- cgit v0.10.2 From d13919301d9a34cd4d3cc5ac73b89012c48cad71 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 18 Jun 2013 10:04:59 -0700 Subject: net: fec: Fix build for MCF5272 Commits 4c09eed9 (net: fec: Enable imx6 enet checksum acceleration) and baa70a5c (net: fec: enable pause frame to improve rx prefomance for 1G network) introduced functionality into the FEC driver which is not supported on MCF5272. The registers used to implement this functionality do not exist on MCF5272. Since register defines for MCF5272 are separate from register defines for other chips, building images for MCF5272 fails as follows. fec_main.c: In function 'fec_restart': fec_main.c:520:8: error: 'FEC_RACC' undeclared (first use in this function) fec_main.c:585:3: error: 'FEC_R_FIFO_RSEM' undeclared (first use in this function) fec_main.c:586:3: error: 'FEC_R_FIFO_RSFL' undeclared (first use in this function) fec_main.c:587:3: error: 'FEC_R_FIFO_RAEM' undeclared (first use in this function) fec_main.c:588:3: error: 'FEC_R_FIFO_RAFL' undeclared (first use in this function) fec_main.c:591:3: error: 'FEC_OPD' undeclared (first use in this function) Adding the missing register defines is not an option, since the registers do not exist on MCF5272. Disable the added functionality for MCF5272 builds. Cc: Frank Li Cc: Jim Baxter Signed-off-by: Guenter Roeck Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index a667015..d48099f 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -516,6 +516,7 @@ fec_restart(struct net_device *ndev, int duplex) /* Set MII speed */ writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED); +#if !defined(CONFIG_M5272) /* set RX checksum */ val = readl(fep->hwp + FEC_RACC); if (fep->csum_flags & FLAG_RX_CSUM_ENABLED) @@ -523,6 +524,7 @@ fec_restart(struct net_device *ndev, int duplex) else val &= ~FEC_RACC_OPTIONS; writel(val, fep->hwp + FEC_RACC); +#endif /* * The phy interface and speed need to get configured @@ -575,6 +577,7 @@ fec_restart(struct net_device *ndev, int duplex) #endif } +#if !defined(CONFIG_M5272) /* enable pause frame*/ if ((fep->pause_flag & FEC_PAUSE_FLAG_ENABLE) || ((fep->pause_flag & FEC_PAUSE_FLAG_AUTONEG) && @@ -592,6 +595,7 @@ fec_restart(struct net_device *ndev, int duplex) } else { rcntl &= ~FEC_ENET_FCE; } +#endif /* !defined(CONFIG_M5272) */ writel(rcntl, fep->hwp + FEC_R_CNTRL); @@ -1205,7 +1209,9 @@ static int fec_enet_mii_probe(struct net_device *ndev) /* mask with MAC supported features */ if (id_entry->driver_data & FEC_QUIRK_HAS_GBIT) { phy_dev->supported &= PHY_GBIT_FEATURES; +#if !defined(CONFIG_M5272) phy_dev->supported |= SUPPORTED_Pause; +#endif } else phy_dev->supported &= PHY_BASIC_FEATURES; @@ -1390,6 +1396,8 @@ static int fec_enet_get_ts_info(struct net_device *ndev, } } +#if !defined(CONFIG_M5272) + static void fec_enet_get_pauseparam(struct net_device *ndev, struct ethtool_pauseparam *pause) { @@ -1436,9 +1444,13 @@ static int fec_enet_set_pauseparam(struct net_device *ndev, return 0; } +#endif /* !defined(CONFIG_M5272) */ + static const struct ethtool_ops fec_enet_ethtool_ops = { +#if !defined(CONFIG_M5272) .get_pauseparam = fec_enet_get_pauseparam, .set_pauseparam = fec_enet_set_pauseparam, +#endif .get_settings = fec_enet_get_settings, .set_settings = fec_enet_set_settings, .get_drvinfo = fec_enet_get_drvinfo, @@ -1874,10 +1886,12 @@ fec_probe(struct platform_device *pdev) /* setup board info structure */ fep = netdev_priv(ndev); +#if !defined(CONFIG_M5272) /* default enable pause frame auto negotiation */ if (pdev->id_entry && (pdev->id_entry->driver_data & FEC_QUIRK_HAS_GBIT)) fep->pause_flag |= FEC_PAUSE_FLAG_AUTONEG; +#endif fep->hwp = devm_request_and_ioremap(&pdev->dev, r); fep->pdev = pdev; -- cgit v0.10.2 From 2bd470fc08cbbfd4f2e53a620362806620d217ed Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Wed, 19 Jun 2013 18:06:54 -0700 Subject: netlink: export netlink_diag.h header The netlink_diag.h is in include/uapi/linux but not in the Kbuild necessary to cause it to be exported by make headers_install. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild index ab5d499..bdc6e87 100644 --- a/include/uapi/linux/Kbuild +++ b/include/uapi/linux/Kbuild @@ -261,6 +261,7 @@ header-y += net_dropmon.h header-y += net_tstamp.h header-y += netconf.h header-y += netdevice.h +header-y += netlink_diag.h header-y += netfilter.h header-y += netfilter_arp.h header-y += netfilter_bridge.h -- cgit v0.10.2 From 6d3d76f877ca061911343d5d1650458906fdf0ea Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Tue, 18 Jun 2013 15:04:35 +0530 Subject: drivers: net: cpsw: fix cpsw clock gating issue across suspend/resume Due to some hardware integration issue, CPSW sliver modules requires a reset across suspend/resume cycle for a successful clock gating to CPGMAC (CPSW and Davinci MDIO) in AM335x PG1.0. This issue is fixed in PG2.x, though to support suspend/resume on PG1.0 this reset is required. Signed-off-by: Mugunthan V N Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 2fd69db..e66a202 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1976,6 +1976,8 @@ static int cpsw_suspend(struct device *dev) if (netif_running(ndev)) cpsw_ndo_stop(ndev); + soft_reset("sliver 0", &priv->slaves[0].sliver->soft_reset); + soft_reset("sliver 1", &priv->slaves[1].sliver->soft_reset); pm_runtime_put_sync(&pdev->dev); return 0; -- cgit v0.10.2 From f5351ef73e476d7019fcd7a1c4461a153f663b4b Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Tue, 18 Jun 2013 07:03:23 +0200 Subject: stmmac: fix EEE setup This patch fixes the EEE setup allowing to configure this support when the link changes. Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h index 7788fbe..9517697 100644 --- a/drivers/net/ethernet/stmicro/stmmac/common.h +++ b/drivers/net/ethernet/stmicro/stmmac/common.h @@ -297,8 +297,8 @@ struct dma_features { #define MAC_RNABLE_RX 0x00000004 /* Receiver Enable */ /* Default LPI timers */ -#define STMMAC_DEFAULT_LIT_LS_TIMER 0x3E8 -#define STMMAC_DEFAULT_TWT_LS_TIMER 0x0 +#define STMMAC_DEFAULT_LIT_LS 0x3E8 +#define STMMAC_DEFAULT_TWT_LS 0x0 #define STMMAC_CHAIN_MODE 0x1 #define STMMAC_RING_MODE 0x2 diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index ee919ca..e9eab29 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -130,7 +130,7 @@ static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE | static int eee_timer = STMMAC_DEFAULT_LPI_TIMER; module_param(eee_timer, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(eee_timer, "LPI tx expiration time in msec"); -#define STMMAC_LPI_TIMER(x) (jiffies + msecs_to_jiffies(x)) +#define STMMAC_LPI_T(x) (jiffies + msecs_to_jiffies(x)) /* By default the driver will use the ring mode to manage tx and rx descriptors * but passing this value so user can force to use the chain instead of the ring @@ -288,7 +288,7 @@ static void stmmac_eee_ctrl_timer(unsigned long arg) struct stmmac_priv *priv = (struct stmmac_priv *)arg; stmmac_enable_eee_mode(priv); - mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_TIMER(eee_timer)); + mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_T(eee_timer)); } /** @@ -304,22 +304,34 @@ bool stmmac_eee_init(struct stmmac_priv *priv) { bool ret = false; + /* Using PCS we cannot dial with the phy registers at this stage + * so we do not support extra feature like EEE. + */ + if ((priv->pcs == STMMAC_PCS_RGMII) || (priv->pcs == STMMAC_PCS_TBI) || + (priv->pcs == STMMAC_PCS_RTBI)) + goto out; + /* MAC core supports the EEE feature. */ if (priv->dma_cap.eee) { /* Check if the PHY supports EEE */ if (phy_init_eee(priv->phydev, 1)) goto out; - priv->eee_active = 1; - init_timer(&priv->eee_ctrl_timer); - priv->eee_ctrl_timer.function = stmmac_eee_ctrl_timer; - priv->eee_ctrl_timer.data = (unsigned long)priv; - priv->eee_ctrl_timer.expires = STMMAC_LPI_TIMER(eee_timer); - add_timer(&priv->eee_ctrl_timer); - - priv->hw->mac->set_eee_timer(priv->ioaddr, - STMMAC_DEFAULT_LIT_LS_TIMER, - priv->tx_lpi_timer); + if (!priv->eee_active) { + priv->eee_active = 1; + init_timer(&priv->eee_ctrl_timer); + priv->eee_ctrl_timer.function = stmmac_eee_ctrl_timer; + priv->eee_ctrl_timer.data = (unsigned long)priv; + priv->eee_ctrl_timer.expires = STMMAC_LPI_T(eee_timer); + add_timer(&priv->eee_ctrl_timer); + + priv->hw->mac->set_eee_timer(priv->ioaddr, + STMMAC_DEFAULT_LIT_LS, + priv->tx_lpi_timer); + } else + /* Set HW EEE according to the speed */ + priv->hw->mac->set_eee_pls(priv->ioaddr, + priv->phydev->link); pr_info("stmmac: Energy-Efficient Ethernet initialized\n"); @@ -329,20 +341,6 @@ out: return ret; } -/** - * stmmac_eee_adjust: adjust HW EEE according to the speed - * @priv: driver private structure - * Description: - * When the EEE has been already initialised we have to - * modify the PLS bit in the LPI ctrl & status reg according - * to the PHY link status. For this reason. - */ -static void stmmac_eee_adjust(struct stmmac_priv *priv) -{ - if (priv->eee_enabled) - priv->hw->mac->set_eee_pls(priv->ioaddr, priv->phydev->link); -} - /* stmmac_get_tx_hwtstamp: get HW TX timestamps * @priv: driver private structure * @entry : descriptor index to be used. @@ -769,7 +767,10 @@ static void stmmac_adjust_link(struct net_device *dev) if (new_state && netif_msg_link(priv)) phy_print_status(phydev); - stmmac_eee_adjust(priv); + /* At this stage, it could be needed to setup the EEE or adjust some + * MAC related HW registers. + */ + priv->eee_enabled = stmmac_eee_init(priv); spin_unlock_irqrestore(&priv->lock, flags); @@ -1277,7 +1278,7 @@ static void stmmac_tx_clean(struct stmmac_priv *priv) if ((priv->eee_enabled) && (!priv->tx_path_in_lpi_mode)) { stmmac_enable_eee_mode(priv); - mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_TIMER(eee_timer)); + mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_T(eee_timer)); } spin_unlock(&priv->tx_lock); } @@ -1671,14 +1672,9 @@ static int stmmac_open(struct net_device *dev) if (priv->phydev) phy_start(priv->phydev); - priv->tx_lpi_timer = STMMAC_DEFAULT_TWT_LS_TIMER; + priv->tx_lpi_timer = STMMAC_DEFAULT_TWT_LS; - /* Using PCS we cannot dial with the phy registers at this stage - * so we do not support extra feature like EEE. - */ - if (priv->pcs != STMMAC_PCS_RGMII && priv->pcs != STMMAC_PCS_TBI && - priv->pcs != STMMAC_PCS_RTBI) - priv->eee_enabled = stmmac_eee_init(priv); + priv->eee_enabled = stmmac_eee_init(priv); stmmac_init_tx_coalesce(priv); -- cgit v0.10.2 From c0353c7b5da4cbd2ab8227e84bbc9c79890f24ce Mon Sep 17 00:00:00 2001 From: Aydin Arik Date: Fri, 14 Jun 2013 18:56:31 +1200 Subject: ipv4: Fixed MD5 key lookups when adding/ removing MD5 to/ from TCP sockets. MD5 key lookups on a given TCP socket were being performed incorrectly. This fix alters parameter inputs to the MD5 lookup function tcp_md5_do_lookup, which is called by functions tcp_md5_do_add and tcp_md5_do_del. Specifically, the change now inputs the correct address and address family required to make a proper lookup. Signed-off-by: Aydin Arik Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 7196523..7999fc5 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -1003,7 +1003,7 @@ int tcp_md5_do_add(struct sock *sk, const union tcp_md5_addr *addr, struct tcp_sock *tp = tcp_sk(sk); struct tcp_md5sig_info *md5sig; - key = tcp_md5_do_lookup(sk, (union tcp_md5_addr *)&addr, AF_INET); + key = tcp_md5_do_lookup(sk, addr, family); if (key) { /* Pre-existing entry - just update that one. */ memcpy(key->key, newkey, newkeylen); @@ -1048,7 +1048,7 @@ int tcp_md5_do_del(struct sock *sk, const union tcp_md5_addr *addr, int family) struct tcp_md5sig_key *key; struct tcp_md5sig_info *md5sig; - key = tcp_md5_do_lookup(sk, (union tcp_md5_addr *)&addr, AF_INET); + key = tcp_md5_do_lookup(sk, addr, family); if (!key) return -ENOENT; hlist_del_rcu(&key->node); -- cgit v0.10.2 From 906996d6eb8fbd5ee4241a0e8e0fb013423c934d Mon Sep 17 00:00:00 2001 From: David Daney Date: Wed, 19 Jun 2013 17:40:19 -0700 Subject: netdev: octeon_mgmt: Correct tx IFG workaround. The previous fix was still too agressive to meet ieee specs. Increase to (14, 10). Signed-off-by: David Daney Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/octeon/octeon_mgmt.c b/drivers/net/ethernet/octeon/octeon_mgmt.c index 921729f..a603faf 100644 --- a/drivers/net/ethernet/octeon/octeon_mgmt.c +++ b/drivers/net/ethernet/octeon/octeon_mgmt.c @@ -1141,10 +1141,13 @@ static int octeon_mgmt_open(struct net_device *netdev) /* For compensation state to lock. */ ndelay(1040 * NS_PER_PHY_CLK); - /* Some Ethernet switches cannot handle standard - * Interframe Gap, increase to 16 bytes. + /* Default Interframe Gaps are too small. Recommended + * workaround is. + * + * AGL_GMX_TX_IFG[IFG1]=14 + * AGL_GMX_TX_IFG[IFG2]=10 */ - cvmx_write_csr(CVMX_AGL_GMX_TX_IFG, 0x88); + cvmx_write_csr(CVMX_AGL_GMX_TX_IFG, 0xae); } octeon_mgmt_rx_fill_ring(netdev); -- cgit v0.10.2 From 3ac19c900cf4a46748d789c49d84a58c37b93841 Mon Sep 17 00:00:00 2001 From: David Daney Date: Wed, 19 Jun 2013 17:40:20 -0700 Subject: netdev: octeon_mgmt: Fix structure layout for little-endian. The C ABI reverses the bitfield fill order when compiled as little-endian. Signed-off-by: David Daney Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/octeon/octeon_mgmt.c b/drivers/net/ethernet/octeon/octeon_mgmt.c index a603faf..91a8a5d 100644 --- a/drivers/net/ethernet/octeon/octeon_mgmt.c +++ b/drivers/net/ethernet/octeon/octeon_mgmt.c @@ -46,17 +46,25 @@ union mgmt_port_ring_entry { u64 d64; struct { - u64 reserved_62_63:2; +#define RING_ENTRY_CODE_DONE 0xf +#define RING_ENTRY_CODE_MORE 0x10 +#ifdef __BIG_ENDIAN_BITFIELD + u64 reserved_62_63:2; /* Length of the buffer/packet in bytes */ - u64 len:14; + u64 len:14; /* For TX, signals that the packet should be timestamped */ - u64 tstamp:1; + u64 tstamp:1; /* The RX error code */ - u64 code:7; -#define RING_ENTRY_CODE_DONE 0xf -#define RING_ENTRY_CODE_MORE 0x10 + u64 code:7; /* Physical address of the buffer */ - u64 addr:40; + u64 addr:40; +#else + u64 addr:40; + u64 code:7; + u64 tstamp:1; + u64 len:14; + u64 reserved_62_63:2; +#endif } s; }; -- cgit v0.10.2 From 776fbcc9cbece10756bdb67b48a0798e6446f16b Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Tue, 18 Jun 2013 17:45:40 +0100 Subject: sfc: Remove write permission from phy_type attribute Driver probe currently results in: WARNING: at drivers/base/core.c:576 device_create_file+0x57/0x7e() Attribute phy_type: write permission without 'store' Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c index 39e4cb3..4a14a94 100644 --- a/drivers/net/ethernet/sfc/efx.c +++ b/drivers/net/ethernet/sfc/efx.c @@ -2139,7 +2139,7 @@ show_phy_type(struct device *dev, struct device_attribute *attr, char *buf) struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev)); return sprintf(buf, "%d\n", efx->phy_type); } -static DEVICE_ATTR(phy_type, 0644, show_phy_type, NULL); +static DEVICE_ATTR(phy_type, 0444, show_phy_type, NULL); static int efx_register_netdev(struct efx_nic *efx) { -- cgit v0.10.2 From 451bff2932a69e904f41a180145de1d2358bb8f5 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Tue, 18 Jun 2013 19:30:48 +0200 Subject: pxa168_eth: Allocate receive queue initialized to zero Zero pointer in rx_skb or tx_skb is how respective *_deinit() functions find out that a skb slot is unallocated. If *_init() functions unsuccessfully return after the allocation (e.g. when subsequent dma_alloc_coherent() is not successful), this would result in attempt to kfree() invalid pointers. Signed-off-by: Lubomir Rintel Cc: Kosta Zertsekel Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c index 339bb32..1c8af8b 100644 --- a/drivers/net/ethernet/marvell/pxa168_eth.c +++ b/drivers/net/ethernet/marvell/pxa168_eth.c @@ -1015,7 +1015,7 @@ static int rxq_init(struct net_device *dev) int rx_desc_num = pep->rx_ring_size; /* Allocate RX skb rings */ - pep->rx_skb = kmalloc(sizeof(*pep->rx_skb) * pep->rx_ring_size, + pep->rx_skb = kzalloc(sizeof(*pep->rx_skb) * pep->rx_ring_size, GFP_KERNEL); if (!pep->rx_skb) return -ENOMEM; @@ -1076,7 +1076,7 @@ static int txq_init(struct net_device *dev) int size = 0, i = 0; int tx_desc_num = pep->tx_ring_size; - pep->tx_skb = kmalloc(sizeof(*pep->tx_skb) * pep->tx_ring_size, + pep->tx_skb = kzalloc(sizeof(*pep->tx_skb) * pep->tx_ring_size, GFP_KERNEL); if (!pep->tx_skb) return -ENOMEM; -- cgit v0.10.2 From 9fa8e980bb0a56e46ddd97731f83f608c39aa7a5 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Tue, 18 Jun 2013 19:32:38 +0200 Subject: mv643xx_eth: Allocate receive queue initialized to zero Zero pointer in rx_skb is how respective rxq_deinit() finds out out that a skb slot is unallocated. If rxq_refill() fails (e.g. on OOM condition), subsequent teardown would result in an attempt to kfree() invalid pointers. Signed-off-by: Lubomir Rintel Cc: Lennert Buytenhek Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c index 2ad1494..d1cbfb1 100644 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c @@ -1757,7 +1757,7 @@ static int rxq_init(struct mv643xx_eth_private *mp, int index) memset(rxq->rx_desc_area, 0, size); rxq->rx_desc_area_size = size; - rxq->rx_skb = kmalloc_array(rxq->rx_ring_size, sizeof(*rxq->rx_skb), + rxq->rx_skb = kcalloc(rxq->rx_ring_size, sizeof(*rxq->rx_skb), GFP_KERNEL); if (rxq->rx_skb == NULL) goto out_free; -- cgit v0.10.2 From 8bbd9f04b7d982d1c6aeb5c08f5983b3d0b9e2fe Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Wed, 19 Jun 2013 12:04:26 +0530 Subject: powerpc: Fix bad pmd error with book3E config Book3E uses the hugepd at PMD level and don't encode pte directly at the pmd level. So it will find the lower bits of pmd set and the pmd_bad check throws error. Infact the current code will never take the free_hugepd_range call at all because it will clear the pmd if it find a hugepd pointer. Fix this by clearing bad pmd only if it is not a hugepd pointer. This is regression introduced by e2b3d202d1dba8f3546ed28224ce485bc50010be "powerpc: Switch 16GB and 16MB explicit hugepages to a different page table format" Reported-by: Scott Wood Signed-off-by: Aneesh Kumar K.V Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 237c8e5..77fdd2c 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -592,8 +592,14 @@ static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud, do { pmd = pmd_offset(pud, addr); next = pmd_addr_end(addr, end); - if (pmd_none_or_clear_bad(pmd)) + if (!is_hugepd(pmd)) { + /* + * if it is not hugepd pointer, we should already find + * it cleared. + */ + WARN_ON(!pmd_none_or_clear_bad(pmd)); continue; + } #ifdef CONFIG_PPC_FSL_BOOK3E /* * Increment next by the size of the huge mapping since -- cgit v0.10.2 From a881ae1f625c599b460cc8f8a7fcb1c438f699ad Mon Sep 17 00:00:00 2001 From: Gao feng Date: Sun, 16 Jun 2013 11:14:30 +0800 Subject: ipv6: don't call addrconf_dst_alloc again when enable lo If we disable all of the net interfaces, and enable un-lo interface before lo interface, we already allocated the addrconf dst in ipv6_add_addr. So we shouldn't allocate it again when we enable lo interface. Otherwise the message below will be triggered. unregister_netdevice: waiting for sit1 to become free. Usage count = 1 This problem is introduced by commit 25fb6ca4ed9cad72f14f61629b68dc03c0d9713f "net IPv6 : Fix broken IPv6 routing table after loopback down-up" Signed-off-by: Gao feng Signed-off-by: David S. Miller diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 1bbf744..77b6261 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -2655,6 +2655,9 @@ static void init_loopback(struct net_device *dev) if (sp_ifa->flags & (IFA_F_DADFAILED | IFA_F_TENTATIVE)) continue; + if (sp_ifa->rt) + continue; + sp_rt = addrconf_dst_alloc(idev, &sp_ifa->addr, 0); /* Failure cases are ignored */ -- cgit v0.10.2 From a7bf58040f4e8a7245cb3e24ab93057be3c46363 Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Fri, 14 Jun 2013 17:07:01 +0200 Subject: net: vlan: fix comment for vlan_ethhdr->h_vlan_proto After addition of 8021AD h_vlan_proto can be either ETH_P_8021Q or ETH_P_8021AD. Signed-off-by: Olaf Hering Signed-off-by: David S. Miller diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h index 52bd03b..637fa71d 100644 --- a/include/linux/if_vlan.h +++ b/include/linux/if_vlan.h @@ -44,7 +44,7 @@ struct vlan_hdr { * struct vlan_ethhdr - vlan ethernet header (ethhdr + vlan_hdr) * @h_dest: destination ethernet address * @h_source: source ethernet address - * @h_vlan_proto: ethernet protocol (always 0x8100) + * @h_vlan_proto: ethernet protocol * @h_vlan_TCI: priority and VLAN ID * @h_vlan_encapsulated_proto: packet type ID or len */ -- cgit v0.10.2 From 5f63adbb4cb9f952a8daee97f89c8811da5fd68a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 20 Jun 2013 05:46:00 -0300 Subject: [media] s5p makefiles: don't override other selections on obj-[ym] The $obj-m/$obj-y vars should be adding new modules to build, not overriding it. So, it should never use $obj-y := foo.o instead, it should use: $obj-y += foo.o Failing to do that is very bad, as it will suppress needed modules. Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/s5p-jpeg/Makefile b/drivers/media/platform/s5p-jpeg/Makefile index ddc2900..d18cb5e 100644 --- a/drivers/media/platform/s5p-jpeg/Makefile +++ b/drivers/media/platform/s5p-jpeg/Makefile @@ -1,2 +1,2 @@ s5p-jpeg-objs := jpeg-core.o -obj-$(CONFIG_VIDEO_SAMSUNG_S5P_JPEG) := s5p-jpeg.o +obj-$(CONFIG_VIDEO_SAMSUNG_S5P_JPEG) += s5p-jpeg.o diff --git a/drivers/media/platform/s5p-mfc/Makefile b/drivers/media/platform/s5p-mfc/Makefile index 379008c..15f59b3 100644 --- a/drivers/media/platform/s5p-mfc/Makefile +++ b/drivers/media/platform/s5p-mfc/Makefile @@ -1,4 +1,4 @@ -obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC) := s5p-mfc.o +obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC) += s5p-mfc.o s5p-mfc-y += s5p_mfc.o s5p_mfc_intr.o s5p-mfc-y += s5p_mfc_dec.o s5p_mfc_enc.o s5p-mfc-y += s5p_mfc_ctrl.o s5p_mfc_pm.o -- cgit v0.10.2 From abc41254181e901ef5eda2c884ca6cd88a186b6d Mon Sep 17 00:00:00 2001 From: Jed Davis Date: Thu, 20 Jun 2013 04:07:14 +0100 Subject: perf: arm64: Record the user-mode PC in the call chain. With this change, we no longer lose the innermost entry in the user-mode part of the call chain. See also the x86 port, which includes the ip, and the corresponding change in arch/arm. Signed-off-by: Jed Davis Acked-by: Ingo Molnar Acked-by: Will Deacon Cc: stable@vger.kernel.org Signed-off-by: Catalin Marinas diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c index 1e49e5eb..9ba33c4 100644 --- a/arch/arm64/kernel/perf_event.c +++ b/arch/arm64/kernel/perf_event.c @@ -1336,6 +1336,7 @@ void perf_callchain_user(struct perf_callchain_entry *entry, return; } + perf_callchain_store(entry, regs->pc); tail = (struct frame_tail __user *)regs->regs[29]; while (entry->nr < PERF_MAX_STACK_DEPTH && -- cgit v0.10.2 From 142dcdd3c25fc7a3866bb06980e8f93a2ed7e050 Mon Sep 17 00:00:00 2001 From: Phil Oester Date: Wed, 19 Jun 2013 06:49:51 -0400 Subject: netfilter: nf_conntrack_ipv6: Plug sk_buff leak in fragment handling In commit 4cdd3408 ("netfilter: nf_conntrack_ipv6: improve fragmentation handling"), an sk_buff leak was introduced when dealing with reassembled packets by grabbing a reference to the original skb instead of the reassembled skb. At this point, the leak only impacted conntracks with an associated helper. In commit 58a317f1 ("netfilter: ipv6: add IPv6 NAT support"), the bug was expanded to include all reassembled packets with unconfirmed conntracks. Fix this by grabbing a reference to the proper reassembled skb. This closes netfilter bugzilla #823. Signed-off-by: Phil Oester Signed-off-by: Pablo Neira Ayuso diff --git a/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c b/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c index 97bcf2b..c9b6a6e 100644 --- a/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c +++ b/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c @@ -204,7 +204,7 @@ static unsigned int __ipv6_conntrack_in(struct net *net, if (ct != NULL && !nf_ct_is_untracked(ct)) { help = nfct_help(ct); if ((help && help->helper) || !nf_ct_is_confirmed(ct)) { - nf_conntrack_get_reasm(skb); + nf_conntrack_get_reasm(reasm); NF_HOOK_THRESH(NFPROTO_IPV6, hooknum, reasm, (struct net_device *)in, (struct net_device *)out, -- cgit v0.10.2 From b52e0a7c4e4100f8683af508664e60e1603070f9 Mon Sep 17 00:00:00 2001 From: Michel Lespinasse Date: Thu, 6 Jun 2013 04:41:15 -0700 Subject: x86: Fix trigger_all_cpu_backtrace() implementation The following change fixes the x86 implementation of trigger_all_cpu_backtrace(), which was previously (accidentally, as far as I can tell) disabled to always return false as on architectures that do not implement this function. trigger_all_cpu_backtrace(), as defined in include/linux/nmi.h, should call arch_trigger_all_cpu_backtrace() if available, or return false if the underlying arch doesn't implement this function. x86 did provide a suitable arch_trigger_all_cpu_backtrace() implementation, but it wasn't actually being used because it was declared in asm/nmi.h, which linux/nmi.h doesn't include. Also, linux/nmi.h couldn't easily be fixed by including asm/nmi.h, because that file is not available on all architectures. I am proposing to fix this by moving the x86 definition of arch_trigger_all_cpu_backtrace() to asm/irq.h. Tested via: echo l > /proc/sysrq-trigger Before the change, this uses a fallback implementation which shows backtraces on active CPUs (using smp_call_function_interrupt() ) After the change, this shows NMI backtraces on all CPUs Signed-off-by: Michel Lespinasse Cc: Linus Torvalds Link: http://lkml.kernel.org/r/1370518875-1346-1-git-send-email-walken@google.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/include/asm/irq.h b/arch/x86/include/asm/irq.h index ba870bb..57873be 100644 --- a/arch/x86/include/asm/irq.h +++ b/arch/x86/include/asm/irq.h @@ -41,4 +41,9 @@ extern int vector_used_by_percpu_irq(unsigned int vector); extern void init_ISA_irqs(void); +#ifdef CONFIG_X86_LOCAL_APIC +void arch_trigger_all_cpu_backtrace(void); +#define arch_trigger_all_cpu_backtrace arch_trigger_all_cpu_backtrace +#endif + #endif /* _ASM_X86_IRQ_H */ diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h index c0fa356..86f9301 100644 --- a/arch/x86/include/asm/nmi.h +++ b/arch/x86/include/asm/nmi.h @@ -18,9 +18,7 @@ extern int proc_nmi_enabled(struct ctl_table *, int , void __user *, size_t *, loff_t *); extern int unknown_nmi_panic; -void arch_trigger_all_cpu_backtrace(void); -#define arch_trigger_all_cpu_backtrace arch_trigger_all_cpu_backtrace -#endif +#endif /* CONFIG_X86_LOCAL_APIC */ #define NMI_FLAG_FIRST 1 diff --git a/arch/x86/kernel/apic/hw_nmi.c b/arch/x86/kernel/apic/hw_nmi.c index 31cb9ae..a698d71 100644 --- a/arch/x86/kernel/apic/hw_nmi.c +++ b/arch/x86/kernel/apic/hw_nmi.c @@ -9,6 +9,7 @@ * */ #include +#include #include #include -- cgit v0.10.2 From 003002e04ed38618fc37b92ba128f5ca79d39f4f Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Wed, 5 Jun 2013 12:12:16 +0900 Subject: kprobes: Fix arch_prepare_kprobe to handle copy insn failures Fix arch_prepare_kprobe() to handle failures in copy instruction correctly. This fix is related to the previous fix: 8101376 which made __copy_instruction return an error result if failed, but caller site was not updated to handle it. Thus, this is the other half of the bugfix. This fix is also related to the following bug-report: https://bugzilla.redhat.com/show_bug.cgi?id=910649 Signed-off-by: Masami Hiramatsu Acked-by: Steven Rostedt Tested-by: Jonathan Lebon Cc: Frank Ch. Eigler Cc: systemtap@sourceware.org Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20130605031216.15285.2001.stgit@mhiramat-M0-7522 Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c index 9895a9a..211bce4 100644 --- a/arch/x86/kernel/kprobes/core.c +++ b/arch/x86/kernel/kprobes/core.c @@ -365,10 +365,14 @@ int __kprobes __copy_instruction(u8 *dest, u8 *src) return insn.length; } -static void __kprobes arch_copy_kprobe(struct kprobe *p) +static int __kprobes arch_copy_kprobe(struct kprobe *p) { + int ret; + /* Copy an instruction with recovering if other optprobe modifies it.*/ - __copy_instruction(p->ainsn.insn, p->addr); + ret = __copy_instruction(p->ainsn.insn, p->addr); + if (!ret) + return -EINVAL; /* * __copy_instruction can modify the displacement of the instruction, @@ -384,6 +388,8 @@ static void __kprobes arch_copy_kprobe(struct kprobe *p) /* Also, displacement change doesn't affect the first byte */ p->opcode = p->ainsn.insn[0]; + + return 0; } int __kprobes arch_prepare_kprobe(struct kprobe *p) @@ -397,8 +403,8 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) p->ainsn.insn = get_insn_slot(); if (!p->ainsn.insn) return -ENOMEM; - arch_copy_kprobe(p); - return 0; + + return arch_copy_kprobe(p); } void __kprobes arch_arm_kprobe(struct kprobe *p) -- cgit v0.10.2 From 8b6fd652641e5ab1892d092e73e83d49291ed638 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 12 Jun 2013 19:30:27 +0800 Subject: irqchip: gic: call gic_cpu_init() as well in CPU_STARTING_FROZEN case Commit c011470 (irqchip: gic: Perform the gic_secondary_init() call via CPU notifier) moves gic_secondary_init() that used to be called in .smp_secondary_init hook into a notifier call. But it changes the system behavior a little bit. Before the commit, gic_cpu_init() is called not only when kernel brings up the secondary cores but also when system resuming procedure hot-plugs the cores back to kernel. While after the commit, the function will not be called in the latter case, where the 'action' will not be CPU_STARTING but CPU_STARTING_FROZEN. This behavior difference at least causes the following suspend/resume regression on imx6q. $ echo mem > /sys/power/state PM: Syncing filesystems ... done. PM: Preparing system for mem sleep mmc1: card e624 removed Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: Entering mem sleep PM: suspend of devices complete after 5.930 msecs PM: suspend devices took 0.010 seconds PM: late suspend of devices complete after 0.343 msecs PM: noirq suspend of devices complete after 0.828 msecs Disabling non-boot CPUs ... CPU1: shutdown CPU2: shutdown CPU3: shutdown Enabling non-boot CPUs ... CPU1: Booted secondary processor INFO: rcu_sched detected stalls on CPUs/tasks: { 1 2 3} (detected by 0, t=2102 jiffies, g=4294967169, c=4294967168, q=17) Task dump for CPU 1: swapper/1 R running 0 0 1 0x00000000 Backtrace: [] (0xbf895ff4) from [<00000000>] ( (null)) Backtrace aborted due to bad frame pointer <8007ccdc> Task dump for CPU 2: swapper/2 R running 0 0 1 0x00000000 Backtrace: [<8075dbdc>] (0x8075dbdc) from [<00000000>] ( (null)) Backtrace aborted due to bad frame pointer <00000002> Task dump for CPU 3: swapper/3 R running 0 0 1 0x00000000 Backtrace: [<8075dbdc>] (0x8075dbdc) from [<00000000>] ( (null)) Fix the regression by checking 'action' being CPU_STARTING_FROZEN to have gic_cpu_init() called for secondary cores when system resumes. Signed-off-by: Shawn Guo Acked-by: Catalin Marinas Tested-by: Joseph Lo Signed-off-by: Arnd Bergmann diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index 1760ceb..19ceaa6 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -705,7 +705,7 @@ static int gic_irq_domain_xlate(struct irq_domain *d, static int __cpuinit gic_secondary_init(struct notifier_block *nfb, unsigned long action, void *hcpu) { - if (action == CPU_STARTING) + if (action == CPU_STARTING || action == CPU_STARTING_FROZEN) gic_cpu_init(&gic_data[0]); return NOTIFY_OK; } -- cgit v0.10.2 From bb69ee27b96110c509d5b92c9ee541d81a821706 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 20 Jun 2013 10:35:53 -0300 Subject: [media] Fix build when drivers are builtin and frontend modules There are a large number of reports that the media build is not compiling when some drivers are compiled as builtin, while the needed frontends are compiled as module. On the last one of such reports: From: kbuild test robot Subject: saa7134-dvb.c:undefined reference to `zl10039_attach' The .config file has: CONFIG_VIDEO_SAA7134=y CONFIG_VIDEO_SAA7134_DVB=y # CONFIG_MEDIA_ATTACH is not set CONFIG_DVB_ZL10039=m And it produces all those errors: drivers/built-in.o: In function `set_type': tuner-core.c:(.text+0x2f263e): undefined reference to `tea5767_attach' tuner-core.c:(.text+0x2f273e): undefined reference to `tda9887_attach' drivers/built-in.o: In function `tuner_probe': tuner-core.c:(.text+0x2f2d20): undefined reference to `tea5767_autodetection' drivers/built-in.o: In function `av7110_attach': av7110.c:(.text+0x330bda): undefined reference to `ves1x93_attach' av7110.c:(.text+0x330bf7): undefined reference to `stv0299_attach' av7110.c:(.text+0x330c63): undefined reference to `tda8083_attach' av7110.c:(.text+0x330d09): undefined reference to `ves1x93_attach' av7110.c:(.text+0x330d33): undefined reference to `tda8083_attach' av7110.c:(.text+0x330d5d): undefined reference to `stv0297_attach' av7110.c:(.text+0x330dbe): undefined reference to `stv0299_attach' drivers/built-in.o: In function `tuner_attach_dtt7520x': ngene-cards.c:(.text+0x3381cb): undefined reference to `dvb_pll_attach' drivers/built-in.o: In function `demod_attach_lg330x': ngene-cards.c:(.text+0x33828a): undefined reference to `lgdt330x_attach' drivers/built-in.o: In function `demod_attach_stv0900': ngene-cards.c:(.text+0x3383d5): undefined reference to `stv090x_attach' drivers/built-in.o: In function `cineS2_probe': ngene-cards.c:(.text+0x338b7f): undefined reference to `drxk_attach' drivers/built-in.o: In function `configure_tda827x_fe': saa7134-dvb.c:(.text+0x346ae7): undefined reference to `tda10046_attach' drivers/built-in.o: In function `dvb_init': saa7134-dvb.c:(.text+0x347283): undefined reference to `mt352_attach' saa7134-dvb.c:(.text+0x3472cd): undefined reference to `mt352_attach' saa7134-dvb.c:(.text+0x34731c): undefined reference to `tda10046_attach' saa7134-dvb.c:(.text+0x34733c): undefined reference to `tda10046_attach' saa7134-dvb.c:(.text+0x34735c): undefined reference to `tda10046_attach' saa7134-dvb.c:(.text+0x347378): undefined reference to `tda10046_attach' saa7134-dvb.c:(.text+0x3473db): undefined reference to `tda10046_attach' drivers/built-in.o:saa7134-dvb.c:(.text+0x347502): more undefined references to `tda10046_attach' follow drivers/built-in.o: In function `dvb_init': saa7134-dvb.c:(.text+0x347812): undefined reference to `mt352_attach' saa7134-dvb.c:(.text+0x347951): undefined reference to `mt312_attach' saa7134-dvb.c:(.text+0x3479a9): undefined reference to `mt312_attach' >> saa7134-dvb.c:(.text+0x3479c1): undefined reference to `zl10039_attach' This is happening because a builtin module can't use directly a symbol found on a module. By enabling CONFIG_MEDIA_ATTACH, the configuration becomes valid, as dvb_attach() macro loads the module if needed, making the symbol available to the builtin module. While this bug started to appear after the patches that use IS_DEFINED macro (like changeset 7b34be71db533f3e0cf93d53cf62d036cdb5418a), this bug is a way ancient than that. The thing is that, before the IS_DEFINED() patches, the logic used to be: && defined(MODULE)) struct dvb_frontend *zl10039_attach(struct dvb_frontend *fe, u8 i2c_addr, struct i2c_adapter *i2c); static inline struct dvb_frontend *zl10039_attach(struct dvb_frontend *fe, u8 i2c_addr, struct i2c_adapter *i2c) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } The above code, with the .config file used, was evoluting to FALSE (instead of TRUE as it should be, as CONFIG_DVB_ZL10039 is 'm'), and were adding the static inline code at saa7134-dvb, instead of the external call. So, while it weren't producing any compilation error, the code weren't working either. So, as the overhead for using CONFIG_MEDIA_ATTACH is minimal, just enable it, if MODULES is defined. Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig index 7f5a7ca..8270388 100644 --- a/drivers/media/Kconfig +++ b/drivers/media/Kconfig @@ -136,9 +136,9 @@ config DVB_NET # This Kconfig option is used by both PCI and USB drivers config TTPCI_EEPROM - tristate - depends on I2C - default n + tristate + depends on I2C + default n source "drivers/media/dvb-core/Kconfig" @@ -189,6 +189,12 @@ config MEDIA_SUBDRV_AUTOSELECT If unsure say Y. +config MEDIA_ATTACH + bool + depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT + depends on MODULES + default MODULES + source "drivers/media/i2c/Kconfig" source "drivers/media/tuners/Kconfig" source "drivers/media/dvb-frontends/Kconfig" diff --git a/drivers/media/tuners/Kconfig b/drivers/media/tuners/Kconfig index f6768ca..15665de 100644 --- a/drivers/media/tuners/Kconfig +++ b/drivers/media/tuners/Kconfig @@ -1,23 +1,3 @@ -config MEDIA_ATTACH - bool "Load and attach frontend and tuner driver modules as needed" - depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT - depends on MODULES - default y if !EXPERT - help - Remove the static dependency of DVB card drivers on all - frontend modules for all possible card variants. Instead, - allow the card drivers to only load the frontend modules - they require. - - Also, tuner module will automatically load a tuner driver - when needed, for analog mode. - - This saves several KBytes of memory. - - Note: You will need module-init-tools v3.2 or later for this feature. - - If unsure say Y. - # Analog TV tuners, auto-loaded via tuner.ko config MEDIA_TUNER tristate -- cgit v0.10.2 From 7995bd287134f6c8f80d94bebe7396f05a9bc42b Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 20 Jun 2013 18:58:36 +0400 Subject: splice: don't pass the address of ->f_pos to methods Signed-off-by: Al Viro diff --git a/fs/internal.h b/fs/internal.h index eaa75f7..6812158 100644 --- a/fs/internal.h +++ b/fs/internal.h @@ -132,6 +132,12 @@ extern struct dentry *__d_alloc(struct super_block *, const struct qstr *); extern ssize_t __kernel_write(struct file *, const char *, size_t, loff_t *); /* + * splice.c + */ +extern long do_splice_direct(struct file *in, loff_t *ppos, struct file *out, + loff_t *opos, size_t len, unsigned int flags); + +/* * pipe.c */ extern const struct file_operations pipefifo_fops; diff --git a/fs/read_write.c b/fs/read_write.c index 0343000..2cefa41 100644 --- a/fs/read_write.c +++ b/fs/read_write.c @@ -1064,6 +1064,7 @@ static ssize_t do_sendfile(int out_fd, int in_fd, loff_t *ppos, struct fd in, out; struct inode *in_inode, *out_inode; loff_t pos; + loff_t out_pos; ssize_t retval; int fl; @@ -1077,12 +1078,14 @@ static ssize_t do_sendfile(int out_fd, int in_fd, loff_t *ppos, if (!(in.file->f_mode & FMODE_READ)) goto fput_in; retval = -ESPIPE; - if (!ppos) - ppos = &in.file->f_pos; - else + if (!ppos) { + pos = in.file->f_pos; + } else { + pos = *ppos; if (!(in.file->f_mode & FMODE_PREAD)) goto fput_in; - retval = rw_verify_area(READ, in.file, ppos, count); + } + retval = rw_verify_area(READ, in.file, &pos, count); if (retval < 0) goto fput_in; count = retval; @@ -1099,7 +1102,8 @@ static ssize_t do_sendfile(int out_fd, int in_fd, loff_t *ppos, retval = -EINVAL; in_inode = file_inode(in.file); out_inode = file_inode(out.file); - retval = rw_verify_area(WRITE, out.file, &out.file->f_pos, count); + out_pos = out.file->f_pos; + retval = rw_verify_area(WRITE, out.file, &out_pos, count); if (retval < 0) goto fput_out; count = retval; @@ -1107,7 +1111,6 @@ static ssize_t do_sendfile(int out_fd, int in_fd, loff_t *ppos, if (!max) max = min(in_inode->i_sb->s_maxbytes, out_inode->i_sb->s_maxbytes); - pos = *ppos; if (unlikely(pos + count > max)) { retval = -EOVERFLOW; if (pos >= max) @@ -1126,18 +1129,23 @@ static ssize_t do_sendfile(int out_fd, int in_fd, loff_t *ppos, if (in.file->f_flags & O_NONBLOCK) fl = SPLICE_F_NONBLOCK; #endif - retval = do_splice_direct(in.file, ppos, out.file, count, fl); + retval = do_splice_direct(in.file, &pos, out.file, &out_pos, count, fl); if (retval > 0) { add_rchar(current, retval); add_wchar(current, retval); fsnotify_access(in.file); fsnotify_modify(out.file); + out.file->f_pos = out_pos; + if (ppos) + *ppos = pos; + else + in.file->f_pos = pos; } inc_syscr(current); inc_syscw(current); - if (*ppos > max) + if (pos > max) retval = -EOVERFLOW; fput_out: diff --git a/fs/splice.c b/fs/splice.c index e6b2559..9eca476 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -1274,7 +1274,7 @@ static int direct_splice_actor(struct pipe_inode_info *pipe, { struct file *file = sd->u.file; - return do_splice_from(pipe, file, &file->f_pos, sd->total_len, + return do_splice_from(pipe, file, sd->opos, sd->total_len, sd->flags); } @@ -1294,7 +1294,7 @@ static int direct_splice_actor(struct pipe_inode_info *pipe, * */ long do_splice_direct(struct file *in, loff_t *ppos, struct file *out, - size_t len, unsigned int flags) + loff_t *opos, size_t len, unsigned int flags) { struct splice_desc sd = { .len = len, @@ -1302,6 +1302,7 @@ long do_splice_direct(struct file *in, loff_t *ppos, struct file *out, .flags = flags, .pos = *ppos, .u.file = out, + .opos = opos, }; long ret; @@ -1325,7 +1326,7 @@ static long do_splice(struct file *in, loff_t __user *off_in, { struct pipe_inode_info *ipipe; struct pipe_inode_info *opipe; - loff_t offset, *off; + loff_t offset; long ret; ipipe = get_pipe_info(in); @@ -1356,13 +1357,15 @@ static long do_splice(struct file *in, loff_t __user *off_in, return -EINVAL; if (copy_from_user(&offset, off_out, sizeof(loff_t))) return -EFAULT; - off = &offset; - } else - off = &out->f_pos; + } else { + offset = out->f_pos; + } - ret = do_splice_from(ipipe, out, off, len, flags); + ret = do_splice_from(ipipe, out, &offset, len, flags); - if (off_out && copy_to_user(off_out, off, sizeof(loff_t))) + if (!off_out) + out->f_pos = offset; + else if (copy_to_user(off_out, &offset, sizeof(loff_t))) ret = -EFAULT; return ret; @@ -1376,13 +1379,15 @@ static long do_splice(struct file *in, loff_t __user *off_in, return -EINVAL; if (copy_from_user(&offset, off_in, sizeof(loff_t))) return -EFAULT; - off = &offset; - } else - off = &in->f_pos; + } else { + offset = in->f_pos; + } - ret = do_splice_to(in, off, opipe, len, flags); + ret = do_splice_to(in, &offset, opipe, len, flags); - if (off_in && copy_to_user(off_in, off, sizeof(loff_t))) + if (!off_in) + in->f_pos = offset; + else if (copy_to_user(off_in, &offset, sizeof(loff_t))) ret = -EFAULT; return ret; diff --git a/include/linux/fs.h b/include/linux/fs.h index 43db02e..65c2be2 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2414,8 +2414,6 @@ extern ssize_t generic_file_splice_write(struct pipe_inode_info *, struct file *, loff_t *, size_t, unsigned int); extern ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe, struct file *out, loff_t *, size_t len, unsigned int flags); -extern long do_splice_direct(struct file *in, loff_t *ppos, struct file *out, - size_t len, unsigned int flags); extern void file_ra_state_init(struct file_ra_state *ra, struct address_space *mapping); diff --git a/include/linux/splice.h b/include/linux/splice.h index 09a545a..74575cb 100644 --- a/include/linux/splice.h +++ b/include/linux/splice.h @@ -35,6 +35,7 @@ struct splice_desc { void *data; /* cookie */ } u; loff_t pos; /* file position */ + loff_t *opos; /* sendfile: output position */ size_t num_spliced; /* number of bytes already spliced */ bool need_wakeup; /* need to wake up writer */ }; -- cgit v0.10.2 From 8b4d801b2b123b6c09742f861fe44a8527b84d47 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Thu, 20 Jun 2013 17:50:06 +0200 Subject: hw_breakpoint: Fix cpu check in task_bp_pinned(cpu) trinity fuzzer triggered WARN_ONCE("Can't find any breakpoint slot") in arch_install_hw_breakpoint() but the problem is not arch-specific. The problem is, task_bp_pinned(cpu) checks "cpu == iter->cpu" but this doesn't account the "all cpus" events with iter->cpu < 0. This means that, say, register_user_hw_breakpoint(tsk) can happily create the arbitrary number > HBP_NUM of breakpoints which can not be activated. toggle_bp_task_slot() is equally wrong by the same reason and nr_task_bp_pinned[] can have negative entries. Simple test: # perl -e 'sleep 1 while 1' & # perf record -e mem:0x10,mem:0x10,mem:0x10,mem:0x10,mem:0x10 -p `pidof perl` Before this patch this triggers the same problem/WARN_ON(), after the patch it correctly fails with -ENOSPC. Reported-by: Vince Weaver Signed-off-by: Oleg Nesterov Acked-by: Frederic Weisbecker Cc: Link: http://lkml.kernel.org/r/20130620155006.GA6324@redhat.com Signed-off-by: Ingo Molnar diff --git a/kernel/events/hw_breakpoint.c b/kernel/events/hw_breakpoint.c index a64f8ae..a853dea 100644 --- a/kernel/events/hw_breakpoint.c +++ b/kernel/events/hw_breakpoint.c @@ -120,7 +120,7 @@ static int task_bp_pinned(int cpu, struct perf_event *bp, enum bp_type_idx type) list_for_each_entry(iter, &bp_task_head, hw.bp_list) { if (iter->hw.bp_target == tsk && find_slot_idx(iter) == type && - cpu == iter->cpu) + (iter->cpu < 0 || cpu == iter->cpu)) count += hw_breakpoint_weight(iter); } -- cgit v0.10.2 From c790b0ad23f427c7522ffed264706238c57c007e Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Thu, 20 Jun 2013 17:50:09 +0200 Subject: hw_breakpoint: Use cpu_possible_mask in {reserve,release}_bp_slot() fetch_bp_busy_slots() and toggle_bp_slot() use for_each_online_cpu(), this is obviously wrong wrt cpu_up() or cpu_down(), we can over/under account the per-cpu numbers. For example: # echo 0 >> /sys/devices/system/cpu/cpu1/online # perf record -e mem:0x10 -p 1 & # echo 1 >> /sys/devices/system/cpu/cpu1/online # perf record -e mem:0x10,mem:0x10,mem:0x10,mem:0x10 -C1 -a & # taskset -p 0x2 1 triggers the same WARN_ONCE("Can't find any breakpoint slot") in arch_install_hw_breakpoint(). Reported-by: Vince Weaver Signed-off-by: Oleg Nesterov Acked-by: Frederic Weisbecker Cc: Link: http://lkml.kernel.org/r/20130620155009.GA6327@redhat.com Signed-off-by: Ingo Molnar diff --git a/kernel/events/hw_breakpoint.c b/kernel/events/hw_breakpoint.c index a853dea..20185ea 100644 --- a/kernel/events/hw_breakpoint.c +++ b/kernel/events/hw_breakpoint.c @@ -149,7 +149,7 @@ fetch_bp_busy_slots(struct bp_busy_slots *slots, struct perf_event *bp, return; } - for_each_online_cpu(cpu) { + for_each_possible_cpu(cpu) { unsigned int nr; nr = per_cpu(nr_cpu_bp_pinned[type], cpu); @@ -235,7 +235,7 @@ toggle_bp_slot(struct perf_event *bp, bool enable, enum bp_type_idx type, if (cpu >= 0) { toggle_bp_task_slot(bp, cpu, enable, type, weight); } else { - for_each_online_cpu(cpu) + for_each_possible_cpu(cpu) toggle_bp_task_slot(bp, cpu, enable, type, weight); } -- cgit v0.10.2 From 8444d5c69549aa0f0b574cc608742d4669e1cc01 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Wed, 19 Jun 2013 10:02:28 -0400 Subject: drm/radeon: update lockup tracking when scheduling in empty ring MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There might be issue with lockup detection when scheduling on an empty ring that have been sitting idle for a while. Thus update the lockup tracking data when scheduling new work in an empty ring. Signed-off-by: Jerome Glisse Tested-by: Andy Lutomirski Cc: stable@vger.kernel.org Reviewed-by: Christian König Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c index e17faa7..82434018 100644 --- a/drivers/gpu/drm/radeon/radeon_ring.c +++ b/drivers/gpu/drm/radeon/radeon_ring.c @@ -402,6 +402,13 @@ int radeon_ring_alloc(struct radeon_device *rdev, struct radeon_ring *ring, unsi return -ENOMEM; /* Align requested size with padding so unlock_commit can * pad safely */ + radeon_ring_free_size(rdev, ring); + if (ring->ring_free_dw == (ring->ring_size / 4)) { + /* This is an empty ring update lockup info to avoid + * false positive. + */ + radeon_ring_lockup_update(ring); + } ndw = (ndw + ring->align_mask) & ~ring->align_mask; while (ndw > (ring->ring_free_dw - 1)) { radeon_ring_free_size(rdev, ring); -- cgit v0.10.2 From 58bd0c69ffa27ea2309959836811e88004d73720 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Wed, 29 May 2013 12:05:59 -0700 Subject: target/iscsi: Fix op=disable + error handling cases in np_store_iser Writing 0 when iser was not previously enabled, so succeed but do nothing so that user-space code doesn't need a try: catch block when ib_isert logic is not available. Also, return actual error from add_network_portal using PTR_ERR during op=enable failure. Signed-off-by: Andy Grover Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/iscsi/iscsi_target_configfs.c b/drivers/target/iscsi/iscsi_target_configfs.c index 13e9e71..fe4a5a20 100644 --- a/drivers/target/iscsi/iscsi_target_configfs.c +++ b/drivers/target/iscsi/iscsi_target_configfs.c @@ -155,7 +155,7 @@ static ssize_t lio_target_np_store_iser( struct iscsi_tpg_np *tpg_np_iser = NULL; char *endptr; u32 op; - int rc; + int rc = 0; op = simple_strtoul(page, &endptr, 0); if ((op != 1) && (op != 0)) { @@ -174,22 +174,25 @@ static ssize_t lio_target_np_store_iser( return -EINVAL; if (op) { - int rc = request_module("ib_isert"); - if (rc != 0) + rc = request_module("ib_isert"); + if (rc != 0) { pr_warn("Unable to request_module for ib_isert\n"); + rc = 0; + } tpg_np_iser = iscsit_tpg_add_network_portal(tpg, &np->np_sockaddr, np->np_ip, tpg_np, ISCSI_INFINIBAND); - if (!tpg_np_iser || IS_ERR(tpg_np_iser)) + if (IS_ERR(tpg_np_iser)) { + rc = PTR_ERR(tpg_np_iser); goto out; + } } else { tpg_np_iser = iscsit_tpg_locate_child_np(tpg_np, ISCSI_INFINIBAND); - if (!tpg_np_iser) - goto out; - - rc = iscsit_tpg_del_network_portal(tpg, tpg_np_iser); - if (rc < 0) - goto out; + if (tpg_np_iser) { + rc = iscsit_tpg_del_network_portal(tpg, tpg_np_iser); + if (rc < 0) + goto out; + } } printk("lio_target_np_store_iser() done, op: %d\n", op); @@ -198,7 +201,7 @@ static ssize_t lio_target_np_store_iser( return count; out: iscsit_put_tpg(tpg); - return -EINVAL; + return rc; } TF_NP_BASE_ATTR(lio_target, iser, S_IRUGO | S_IWUSR); -- cgit v0.10.2 From 58807a524782744aed5fb7b8fefac7134721331a Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 20 Jun 2013 16:36:17 -0700 Subject: iscsi-target: Remove left over v3.10-rc debug printks Reported-by: Andy Grover Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/iscsi/iscsi_target_configfs.c b/drivers/target/iscsi/iscsi_target_configfs.c index fe4a5a20..8d8b3ff 100644 --- a/drivers/target/iscsi/iscsi_target_configfs.c +++ b/drivers/target/iscsi/iscsi_target_configfs.c @@ -195,8 +195,6 @@ static ssize_t lio_target_np_store_iser( } } - printk("lio_target_np_store_iser() done, op: %d\n", op); - iscsit_put_tpg(tpg); return count; out: diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c index bb5d5c5..3402241 100644 --- a/drivers/target/iscsi/iscsi_target_login.c +++ b/drivers/target/iscsi/iscsi_target_login.c @@ -984,8 +984,6 @@ int iscsi_target_setup_login_socket( } np->np_transport = t; - printk("Set np->np_transport to %p -> %s\n", np->np_transport, - np->np_transport->name); return 0; } @@ -1002,7 +1000,6 @@ int iscsit_accept_np(struct iscsi_np *np, struct iscsi_conn *conn) conn->sock = new_sock; conn->login_family = np->np_sockaddr.ss_family; - printk("iSCSI/TCP: Setup conn->sock from new_sock: %p\n", new_sock); if (np->np_sockaddr.ss_family == AF_INET6) { memset(&sock_in6, 0, sizeof(struct sockaddr_in6)); diff --git a/drivers/target/iscsi/iscsi_target_nego.c b/drivers/target/iscsi/iscsi_target_nego.c index 7ad9120..cd5018f 100644 --- a/drivers/target/iscsi/iscsi_target_nego.c +++ b/drivers/target/iscsi/iscsi_target_nego.c @@ -721,9 +721,6 @@ int iscsi_target_locate_portal( start += strlen(key) + strlen(value) + 2; } - - printk("i_buf: %s, s_buf: %s, t_buf: %s\n", i_buf, s_buf, t_buf); - /* * See 5.3. Login Phase. */ -- cgit v0.10.2 From b8cb62f82103083a6e8fa5470bfe634a2c06514d Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sun, 16 Jun 2013 21:27:12 +0100 Subject: x86/efi: Fix dummy variable buffer allocation 1. Check for allocation failure 2. Clear the buffer contents, as they may actually be written to flash 3. Don't leak the buffer Compile-tested only. [ Tested successfully on my buggy ASUS machine - Matt ] Signed-off-by: Ben Hutchings Cc: stable@vger.kernel.org Signed-off-by: Matt Fleming diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 5ae2eb0..d2fbced 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -1069,7 +1069,10 @@ efi_status_t efi_query_variable_store(u32 attributes, unsigned long size) * that by attempting to use more space than is available. */ unsigned long dummy_size = remaining_size + 1024; - void *dummy = kmalloc(dummy_size, GFP_ATOMIC); + void *dummy = kzalloc(dummy_size, GFP_ATOMIC); + + if (!dummy) + return EFI_OUT_OF_RESOURCES; status = efi.set_variable(efi_dummy_name, &EFI_DUMMY_GUID, EFI_VARIABLE_NON_VOLATILE | @@ -1089,6 +1092,8 @@ efi_status_t efi_query_variable_store(u32 attributes, unsigned long size) 0, dummy); } + kfree(dummy); + /* * The runtime code may now have triggered a garbage collection * run, so check the variable info again -- cgit v0.10.2 From cc0ee9873c6afafb387379ca1df25da78a08c603 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Thu, 20 Jun 2013 17:44:22 +0300 Subject: spi/pxa2xx: fix memory corruption due to wrong size used in devm_kzalloc() ACPI part of the driver accidentally used sizeof(*ssp) instead of the correct sizeof(*pdata). This leads to nasty memory corruptions like the one below: BUG: unable to handle kernel paging request at 0000000749fd30b8 IP: [] __list_del_entry+0x31/0xd0 PGD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 30 Comm: kworker/0:1 Not tainted 3.10.0-rc6v3.10-rc6_sdhci_modprobe+ #443 task: ffff8801483a0940 ti: ffff88014839e000 task.ti: ffff88014839e000 RIP: 0010:[] [] __list_del_entry+0x31/0xd0 RSP: 0000:ffff88014839fde8 EFLAGS: 00010046 RAX: ffff880149fd30b0 RBX: ffff880149fd3040 RCX: dead000000200200 RDX: 0000000749fd30b0 RSI: ffff880149fd3058 RDI: ffff88014834d640 RBP: ffff88014839fde8 R08: ffff88014834d640 R09: 0000000000000001 R10: ffff8801483a0940 R11: 0000000000000001 R12: ffff880149fd3040 R13: ffffffff810e0b30 R14: ffff8801483a0940 R15: ffff88014834d640 FS: 0000000000000000(0000) GS:ffff880149e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000168 CR3: 0000000001e0b000 CR4: 00000000001407f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff88014839fe48 ffffffff810e0baf ffffffff81120abd ffff88014839fe20 ffff8801483a0940 ffff8801483a0940 ffff8801483a0940 ffff8801486b1c90 ffff88014834d640 ffffffff810e0b30 0000000000000000 0000000000000000 Call Trace: [] worker_thread+0x7f/0x390 [] ? trace_hardirqs_on+0xd/0x10 [] ? manage_workers.isra.22+0x2b0/0x2b0 [] kthread+0xd9/0xe0 [] ? local_clock+0x3f/0x50 [] ? kthread_create_on_node+0x110/0x110 [] ret_from_fork+0x7c/0xb0 [] ? kthread_create_on_node+0x110/0x110 Fix this by using the right structure size in devm_kzalloc(). Reported-by: Jerome Blin Signed-off-by: Mika Westerberg Signed-off-by: Mark Brown Cc: stable@vger.kernel.org # 3.9+ diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index f5d84d6..48b396f 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1075,7 +1075,7 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev) acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev)) return NULL; - pdata = devm_kzalloc(&pdev->dev, sizeof(*ssp), GFP_KERNEL); + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) { dev_err(&pdev->dev, "failed to allocate memory for platform data\n"); -- cgit v0.10.2 From ea8deb8dfa6b0e8d1b3d1051585706739b46656c Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Mon, 17 Jun 2013 18:15:35 +0200 Subject: tick: Fix tick_broadcast_pending_mask not cleared The recent modification in the cpuidle framework consolidated the timer broadcast code across the different drivers by setting a new flag in the idle state. It tells the cpuidle core code to enter/exit the broadcast mode for the cpu when entering a deep idle state. The broadcast timer enter/exit is no longer handled by the back-end driver. This change made the local interrupt to be enabled *before* calling CLOCK_EVENT_NOTIFY_EXIT. On a tegra114, a four cores system, when the flag has been introduced in the driver, the following warning appeared: WARNING: at kernel/time/tick-broadcast.c:578 tick_broadcast_oneshot_control CPU: 2 PID: 0 Comm: swapper/2 Not tainted 3.10.0-rc3-next-20130529+ #15 [] (tick_broadcast_oneshot_control+0x1a4/0x1d0) from [] (tick_notify+0x240/0x40c) [] (tick_notify+0x240/0x40c) from [] (notifier_call_chain+0x44/0x84) [] (notifier_call_chain+0x44/0x84) from [] (raw_notifier_call_chain+0x18/0x20) [] (raw_notifier_call_chain+0x18/0x20) from [] (clockevents_notify+0x28/0x170) [] (clockevents_notify+0x28/0x170) from [] (cpuidle_idle_call+0x11c/0x168) [] (cpuidle_idle_call+0x11c/0x168) from [] (arch_cpu_idle+0x8/0x38) [] (arch_cpu_idle+0x8/0x38) from [] (cpu_startup_entry+0x60/0x134) [] (cpu_startup_entry+0x60/0x134) from [<804fe9a4>] (0x804fe9a4) I don't have the hardware, so I wasn't able to reproduce the warning but after looking a while at the code, I deduced the following: 1. the CPU2 enters a deep idle state and sets the broadcast timer 2. the timer expires, the tick_handle_oneshot_broadcast function is called, setting the tick_broadcast_pending_mask and waking up the idle cpu CPU2 3. the CPU2 exits idle handles the interrupt and then invokes tick_broadcast_oneshot_control with CLOCK_EVENT_NOTIFY_EXIT which runs the following code: [...] if (dev->next_event.tv64 == KTIME_MAX) goto out; if (cpumask_test_and_clear_cpu(cpu, tick_broadcast_pending_mask)) goto out; [...] So if there is no next event scheduled for CPU2, we fulfil the first condition and jump out without clearing the tick_broadcast_pending_mask. 4. CPU2 goes to deep idle again and calls tick_broadcast_oneshot_control with CLOCK_NOTIFY_EVENT_ENTER but with the tick_broadcast_pending_mask set for CPU2, triggering the warning. The issue only surfaced due to the modifications of the cpuidle framework, which resulted in interrupts being enabled before the call to the clockevents code. If the call happens before interrupts have been enabled, the warning cannot trigger, because there is still the event pending which caused the broadcast timer expiry. Move the check for the next event below the check for the pending bit, so the pending bit gets cleared whether an event is scheduled on the cpu or not. [ tglx: Massaged changelog ] Signed-off-by: Daniel Lezcano Reported-and-tested-by: Joseph Lo Cc: Stephen Warren Cc: linux-arm-kernel@lists.infradead.org Cc: linaro-kernel@lists.linaro.org Link: http://lkml.kernel.org/r/1371485735-31249-1-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Thomas Gleixner diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index b4c2455..20d6fba 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -599,8 +599,6 @@ void tick_broadcast_oneshot_control(unsigned long reason) } else { if (cpumask_test_and_clear_cpu(cpu, tick_broadcast_oneshot_mask)) { clockevents_set_mode(dev, CLOCK_EVT_MODE_ONESHOT); - if (dev->next_event.tv64 == KTIME_MAX) - goto out; /* * The cpu which was handling the broadcast * timer marked this cpu in the broadcast @@ -615,6 +613,11 @@ void tick_broadcast_oneshot_control(unsigned long reason) goto out; /* + * Bail out if there is no next event. + */ + if (dev->next_event.tv64 == KTIME_MAX) + goto out; + /* * If the pending bit is not set, then we are * either the CPU handling the broadcast * interrupt or we got woken by something else. -- cgit v0.10.2 From 945fb136dfcb5291b4fb2abd4fd1edf790de44ff Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Jun 2013 11:01:38 +0400 Subject: aout32 coredump compat fix dump_seek() does SEEK_CUR, not SEEK_SET; native binfmt_aout handles it correctly (seeks by PAGE_SIZE - sizeof(struct user), getting the current position to PAGE_SIZE), compat one seeks by PAGE_SIZE and ends up at PAGE_SIZE + already written... Signed-off-by: Al Viro diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c index 805078e..52ff81c 100644 --- a/arch/x86/ia32/ia32_aout.c +++ b/arch/x86/ia32/ia32_aout.c @@ -192,7 +192,7 @@ static int aout_core_dump(long signr, struct pt_regs *regs, struct file *file, /* struct user */ DUMP_WRITE(&dump, sizeof(dump)); /* Now dump all of the user data. Include malloced stuff as well */ - DUMP_SEEK(PAGE_SIZE); + DUMP_SEEK(PAGE_SIZE - sizeof(dump)); /* now we start writing out the user space info */ set_fs(USER_DS); /* Dump the data area */ -- cgit v0.10.2 From 9e895ace5d82df8929b16f58e9f515f6d54ab82d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 22 Jun 2013 09:47:31 -1000 Subject: Linux 3.10-rc7 diff --git a/Makefile b/Makefile index c6863b5..0142c93 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 10 SUBLEVEL = 0 -EXTRAVERSION = -rc6 +EXTRAVERSION = -rc7 NAME = Unicycling Gorilla # *DOCUMENTATION* -- cgit v0.10.2 From 94add0f82469fa3c4ff978d03a34da90813c819d Mon Sep 17 00:00:00 2001 From: Jiang Liu Date: Sun, 23 Jun 2013 00:59:55 +0200 Subject: ACPI / dock: Initialize ACPI dock subsystem upfront Commit 3b63aaa70e1 (PCI: acpiphp: Do not use ACPI PCI subdriver mechanism) introduced an ACPI dock support regression, because it changed the relative initialization order of the ACPI dock subsystem and the ACPI-based PCI hotplug (acpiphp). Namely, the ACPI dock subsystem has to be initialized before acpiphp_enumerate_slots() is first run, which after commit 3b63aaa70e1 happens during the initial enumeration of the PCI hierarchy triggered by the initial ACPI namespace scan in acpi_scan_init(). For this reason, the dock subsystem has to be initialized before the initial ACPI namespace scan in acpi_scan_init(). To make that happen, modify the ACPI dock subsystem to be non-modular and add the invocation of its initialization routine, acpi_dock_init(), to acpi_scan_init() directly before the initial namespace scan. [rjw: Changelog, removal of dock_exit().] References: https://bugzilla.kernel.org/show_bug.cgi?id=59501 Reported-and-tested-by: Alexander E. Patrakov Tested-by: Illya Klymov Signed-off-by: Jiang Liu Acked-by: Yinghai Lu Cc: 3.9+ Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index ec117c6..c3b34f9 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -994,30 +994,6 @@ err_unregister: } /** - * dock_remove - free up resources related to the dock station - */ -static int dock_remove(struct dock_station *ds) -{ - struct dock_dependent_device *dd, *tmp; - struct platform_device *dock_device = ds->dock_device; - - if (!dock_station_count) - return 0; - - /* remove dependent devices */ - list_for_each_entry_safe(dd, tmp, &ds->dependent_devices, list) - kfree(dd); - - list_del(&ds->sibling); - - /* cleanup sysfs */ - sysfs_remove_group(&dock_device->dev.kobj, &dock_attribute_group); - platform_device_unregister(dock_device); - - return 0; -} - -/** * find_dock_and_bay - look for dock stations and bays * @handle: acpi handle of a device * @lvl: unused @@ -1035,7 +1011,7 @@ find_dock_and_bay(acpi_handle handle, u32 lvl, void *context, void **rv) return AE_OK; } -static int __init dock_init(void) +int __init acpi_dock_init(void) { if (acpi_disabled) return 0; @@ -1054,19 +1030,3 @@ static int __init dock_init(void) ACPI_DOCK_DRIVER_DESCRIPTION, dock_station_count); return 0; } - -static void __exit dock_exit(void) -{ - struct dock_station *tmp, *dock_station; - - unregister_acpi_bus_notifier(&dock_acpi_notifier); - list_for_each_entry_safe(dock_station, tmp, &dock_stations, sibling) - dock_remove(dock_station); -} - -/* - * Must be called before drivers of devices in dock, otherwise we can't know - * which devices are in a dock - */ -subsys_initcall(dock_init); -module_exit(dock_exit); diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index 297cbf4..c610a76 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -40,6 +40,11 @@ void acpi_container_init(void); #else static inline void acpi_container_init(void) {} #endif +#ifdef CONFIG_ACPI_DOCK +void acpi_dock_init(void); +#else +static inline void acpi_dock_init(void) {} +#endif #ifdef CONFIG_ACPI_HOTPLUG_MEMORY void acpi_memory_hotplug_init(void); #else diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index b14ac46..27da630 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -2042,6 +2042,7 @@ int __init acpi_scan_init(void) acpi_lpss_init(); acpi_container_init(); acpi_memory_hotplug_init(); + acpi_dock_init(); mutex_lock(&acpi_scan_lock); /* -- cgit v0.10.2 From d66ecb7220a70ec3f6c0e38e4af28fb8b25d31c6 Mon Sep 17 00:00:00 2001 From: Jiang Liu Date: Sun, 23 Jun 2013 01:01:35 +0200 Subject: PCI / ACPI: Use boot-time resource allocation rules during hotplug On x86 platforms, the kernel respects PCI resource assignments from the BIOS and only reassigns resources for unassigned BARs at boot time. However, with the ACPI-based hotplug (acpiphp), it ignores the BIOS' PCI resource assignments completely and reassigns all resources by itself. This causes differences in PCI resource allocation between boot time and runtime hotplug to occur, which is generally undesirable and sometimes actively breaks things. Namely, if there are enough resources, reassigning all PCI resources during runtime hotplug should work, but it may fail if the resources are constrained. This may happen, for instance, when some PCI devices with huge MMIO BARs are involved in the runtime hotplug operations, because the current PCI MMIO alignment algorithm may waste huge chunks of MMIO address space in those cases. On the Alexander's Sony VAIO VPCZ23A4R the BIOS allocates limited MMIO resources for the dock station which contains a device (graphics adapter) with a 256MB MMIO BAR. An attempt to reassign that during runtime hotplug causes the dock station MMIO window to be exhausted and acpiphp fails to allocate resources for the majority of devices on the dock station as a result. To prevent that from happening, modify acpiphp to follow the boot time resources allocation behavior so that the BIOS' resource assignments are respected during runtime hotplug too. [rjw: Changelog] References: https://bugzilla.kernel.org/show_bug.cgi?id=56531 Reported-and-tested-by: Alexander E. Patrakov Tested-by: Illya Klymov Signed-off-by: Jiang Liu Acked-by: Yinghai Lu Cc: 3.9+ Signed-off-by: Rafael J. Wysocki diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 716aa93..050b6f9 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -670,6 +670,7 @@ static int __ref enable_device(struct acpiphp_slot *slot) struct pci_bus *bus = slot->bridge->pci_bus; struct acpiphp_func *func; int num, max, pass; + LIST_HEAD(add_list); if (slot->flags & SLOT_ENABLED) goto err_exit; @@ -694,13 +695,15 @@ static int __ref enable_device(struct acpiphp_slot *slot) max = pci_scan_bridge(bus, dev, max, pass); if (pass && dev->subordinate) { check_hotplug_bridge(slot, dev); - pci_bus_size_bridges(dev->subordinate); + pcibios_resource_survey_bus(dev->subordinate); + __pci_bus_size_bridges(dev->subordinate, + &add_list); } } } } - pci_bus_assign_resources(bus); + __pci_bus_assign_resources(bus, &add_list, NULL); acpiphp_sanitize_bus(bus); acpiphp_set_hpp_values(bus); acpiphp_set_acpi_region(slot); diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 68678ed..d1182c4 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -202,6 +202,11 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, struct resource *res, unsigned int reg); int pci_resource_bar(struct pci_dev *dev, int resno, enum pci_bar_type *type); void pci_configure_ari(struct pci_dev *dev); +void __ref __pci_bus_size_bridges(struct pci_bus *bus, + struct list_head *realloc_head); +void __ref __pci_bus_assign_resources(const struct pci_bus *bus, + struct list_head *realloc_head, + struct list_head *fail_head); /** * pci_ari_enabled - query ARI forwarding status diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 16abaaa..d254e23 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -1044,7 +1044,7 @@ handle_done: ; } -static void __ref __pci_bus_size_bridges(struct pci_bus *bus, +void __ref __pci_bus_size_bridges(struct pci_bus *bus, struct list_head *realloc_head) { struct pci_dev *dev; @@ -1115,9 +1115,9 @@ void __ref pci_bus_size_bridges(struct pci_bus *bus) } EXPORT_SYMBOL(pci_bus_size_bridges); -static void __ref __pci_bus_assign_resources(const struct pci_bus *bus, - struct list_head *realloc_head, - struct list_head *fail_head) +void __ref __pci_bus_assign_resources(const struct pci_bus *bus, + struct list_head *realloc_head, + struct list_head *fail_head) { struct pci_bus *b; struct pci_dev *dev; -- cgit v0.10.2 From acdb37c361dc87e165889a504e291c1e82ae133c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 22 Jun 2013 19:44:08 -0700 Subject: fs: fix new splice.c kernel-doc warning Fix new kernel-doc warning in fs/splice.c: Warning(fs/splice.c:1298): No description found for parameter 'opos' Signed-off-by: Randy Dunlap Cc: Al Viro Signed-off-by: Linus Torvalds diff --git a/fs/splice.c b/fs/splice.c index 9eca476..d37431d 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -1283,6 +1283,7 @@ static int direct_splice_actor(struct pipe_inode_info *pipe, * @in: file to splice from * @ppos: input file offset * @out: file to splice to + * @opos: output file offset * @len: number of bytes to splice * @flags: splice modifier flags * -- cgit v0.10.2 From f9bd2d7f6d18d96fa31a657f35290741117c0dd3 Mon Sep 17 00:00:00 2001 From: Amir Vadai Date: Thu, 20 Jun 2013 14:58:10 +0300 Subject: net/mlx_en: Timestamping is not supported in slave mode Old hypervisors don't mask out timestamp capability for slave. Till slave support will be added, need to disable capability by slave. Signed-off-by: Amir Vadai Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 2f4a260..8a43499 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -632,6 +632,9 @@ static int mlx4_slave_cap(struct mlx4_dev *dev) dev->caps.cqe_size = 32; } + dev->caps.flags2 &= ~MLX4_DEV_CAP_FLAG2_TS; + mlx4_warn(dev, "Timestamping is not supported in slave mode.\n"); + slave_adjust_steering_mode(dev, &dev_cap, &hca_param); return 0; -- cgit v0.10.2 From db4e9b2b98bac7adc7657ef94bb6d1a419a35571 Mon Sep 17 00:00:00 2001 From: Nikolay Aleksandrov Date: Thu, 20 Jun 2013 14:34:13 +0200 Subject: bonding: fix slave speed reporting in bond_miimon_commit When we have BOND_LINK_UP the speed is reported unconditionally with %u format although it can be SPEED_UNKNOWN (-1). After this patch it returns 0 in that case in an attempt to keep the existing scripts happy. One line is intenionally left 81 chars because it gets ugly if broken. Signed-off-by: Nikolay Aleksandrov Acked-by: Veaceslav Falico Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 02d9ae7..f975696 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2413,7 +2413,8 @@ static void bond_miimon_commit(struct bonding *bond) pr_info("%s: link status definitely up for interface %s, %u Mbps %s duplex.\n", bond->dev->name, slave->dev->name, - slave->speed, slave->duplex ? "full" : "half"); + slave->speed == SPEED_UNKNOWN ? 0 : slave->speed, + slave->duplex ? "full" : "half"); /* notify ad that the link status has changed */ if (bond->params.mode == BOND_MODE_8023AD) -- cgit v0.10.2 From 14bd076955f4e9cb911326d1b7291e3a2b40bdec Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Thu, 20 Jun 2013 16:58:45 +0200 Subject: net: eth: davicnci_cpdma: check dma map error Since the DMA mapping may fail the caller should check the return value. Cc: Mugunthan V N Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c index 49dfd59..053c84f 100644 --- a/drivers/net/ethernet/ti/davinci_cpdma.c +++ b/drivers/net/ethernet/ti/davinci_cpdma.c @@ -705,6 +705,13 @@ int cpdma_chan_submit(struct cpdma_chan *chan, void *token, void *data, } buffer = dma_map_single(ctlr->dev, data, len, chan->dir); + ret = dma_mapping_error(ctlr->dev, buffer); + if (ret) { + cpdma_desc_free(ctlr->pool, desc, 1); + ret = -EINVAL; + goto unlock_ret; + } + mode = CPDMA_DESC_OWNER | CPDMA_DESC_SOP | CPDMA_DESC_EOP; cpdma_desc_to_port(chan, mode, directed); -- cgit v0.10.2 From 8afe3dc891c4dec2ebddbba6f3767684f95ac2f9 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 20 Jun 2013 16:10:59 -0500 Subject: qmi_wwan: add various Novatel Gobi1K IDs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Found in the Windows INF files while investigating the Novatel/Verizon USB-1000 device. The USB-1000 is verified as a Gobi1K device and works with QMI after loading appropriate firmware. Signed-off-by: Dan Williams Acked-by: Bjørn Mork Signed-off-by: David S. Miller diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index d095d0d..5645921 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -590,7 +590,13 @@ static const struct usb_device_id products[] = { {QMI_GOBI1K_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */ {QMI_GOBI1K_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */ {QMI_GOBI1K_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */ - {QMI_GOBI1K_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x1410, 0xa001)}, /* Novatel/Verizon USB-1000 */ + {QMI_GOBI1K_DEVICE(0x1410, 0xa002)}, /* Novatel Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x1410, 0xa003)}, /* Novatel Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x1410, 0xa004)}, /* Novatel Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x1410, 0xa005)}, /* Novatel Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x1410, 0xa006)}, /* Novatel Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x1410, 0xa007)}, /* Novatel Gobi Modem device */ {QMI_GOBI1K_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */ {QMI_GOBI1K_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */ {QMI_GOBI1K_DEVICE(0x05c6, 0x9001)}, /* Generic Gobi Modem device */ -- cgit v0.10.2 From ca8c35852138ee0585eaffe6b9f10a5261ea7771 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 21 Jun 2013 01:12:21 +0400 Subject: sh_eth: fix unhandled RFE interrupt EESR.RFE (receive FIFO overflow) interrupt is enabled by the driver on all SoCs and sh_eth_error() handles it but it's not present in any initializer/assignment of the 'eesr_err_check' field of 'struct sh_eth_cpu_data'. This leads to that interrupt not being handled and cleared, and finally to disabling IRQ and the driver being non-functional. Modify DEFAULT_EESR_ERR_CHECK macro and all explicit initializers of the above mentioned field to contain the EESR.RFE bit. Remove useless backslashes from the initializers, while at it. Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 5e3982f..d9c21dd 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -380,8 +380,9 @@ static struct sh_eth_cpu_data sh_eth_my_cpu_data = { .eesipr_value = 0x01ff009f, .tx_check = EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | EESR_RTO, - .eesr_err_check = EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE | - EESR_RFRMER | EESR_TFE | EESR_TDE | EESR_ECI, + .eesr_err_check = EESR_TWB | EESR_TABT | EESR_RABT | EESR_RFE | + EESR_RDE | EESR_RFRMER | EESR_TFE | EESR_TDE | + EESR_ECI, .tx_error_check = EESR_TWB | EESR_TABT | EESR_TDE | EESR_TFE, .apr = 1, @@ -427,8 +428,9 @@ static struct sh_eth_cpu_data sh_eth_my_cpu_data = { .eesipr_value = DMAC_M_RFRMER | DMAC_M_ECI | 0x01ff009f, .tx_check = EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | EESR_RTO, - .eesr_err_check = EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE | - EESR_RFRMER | EESR_TFE | EESR_TDE | EESR_ECI, + .eesr_err_check = EESR_TWB | EESR_TABT | EESR_RABT | EESR_RFE | + EESR_RDE | EESR_RFRMER | EESR_TFE | EESR_TDE | + EESR_ECI, .tx_error_check = EESR_TWB | EESR_TABT | EESR_TDE | EESR_TFE, .apr = 1, @@ -478,8 +480,9 @@ static struct sh_eth_cpu_data sh_eth_my_cpu_data = { .rmcr_value = 0x00000001, .tx_check = EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | EESR_RTO, - .eesr_err_check = EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE | - EESR_RFRMER | EESR_TFE | EESR_TDE | EESR_ECI, + .eesr_err_check = EESR_TWB | EESR_TABT | EESR_RABT | EESR_RFE | + EESR_RDE | EESR_RFRMER | EESR_TFE | EESR_TDE | + EESR_ECI, .tx_error_check = EESR_TWB | EESR_TABT | EESR_TDE | EESR_TFE, .apr = 1, @@ -592,9 +595,9 @@ static struct sh_eth_cpu_data sh_eth_my_cpu_data_giga = { .eesipr_value = DMAC_M_RFRMER | DMAC_M_ECI | 0x003fffff, .tx_check = EESR_TC1 | EESR_FTC, - .eesr_err_check = EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT | \ - EESR_RDE | EESR_RFRMER | EESR_TFE | EESR_TDE | \ - EESR_ECI, + .eesr_err_check = EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT | + EESR_RFE | EESR_RDE | EESR_RFRMER | EESR_TFE | + EESR_TDE | EESR_ECI, .tx_error_check = EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_TDE | \ EESR_TFE, .fdr_value = 0x0000072f, @@ -674,9 +677,9 @@ static struct sh_eth_cpu_data sh_eth_my_cpu_data = { .eesipr_value = DMAC_M_RFRMER | DMAC_M_ECI | 0x003fffff, .tx_check = EESR_TC1 | EESR_FTC, - .eesr_err_check = EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT | \ - EESR_RDE | EESR_RFRMER | EESR_TFE | EESR_TDE | \ - EESR_ECI, + .eesr_err_check = EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT | + EESR_RFE | EESR_RDE | EESR_RFRMER | EESR_TFE | + EESR_TDE | EESR_ECI, .tx_error_check = EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_TDE | \ EESR_TFE, @@ -811,9 +814,9 @@ static struct sh_eth_cpu_data sh_eth_my_cpu_data = { .eesipr_value = DMAC_M_RFRMER | DMAC_M_ECI | 0x003fffff, .tx_check = EESR_TC1 | EESR_FTC, - .eesr_err_check = EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT | \ - EESR_RDE | EESR_RFRMER | EESR_TFE | EESR_TDE | \ - EESR_ECI, + .eesr_err_check = EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT | + EESR_RFE | EESR_RDE | EESR_RFRMER | EESR_TFE | + EESR_TDE | EESR_ECI, .tx_error_check = EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_TDE | \ EESR_TFE, diff --git a/drivers/net/ethernet/renesas/sh_eth.h b/drivers/net/ethernet/renesas/sh_eth.h index 1ddc9f2..62689a5 100644 --- a/drivers/net/ethernet/renesas/sh_eth.h +++ b/drivers/net/ethernet/renesas/sh_eth.h @@ -253,7 +253,7 @@ enum EESR_BIT { #define DEFAULT_TX_CHECK (EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | \ EESR_RTO) -#define DEFAULT_EESR_ERR_CHECK (EESR_TWB | EESR_TABT | EESR_RABT | \ +#define DEFAULT_EESR_ERR_CHECK (EESR_TWB | EESR_TABT | EESR_RABT | EESR_RFE | \ EESR_RDE | EESR_RFRMER | EESR_ADE | \ EESR_TFE | EESR_TDE | EESR_ECI) #define DEFAULT_TX_ERROR_CHECK (EESR_TWB | EESR_TABT | EESR_ADE | EESR_TDE | \ -- cgit v0.10.2 From 4eb313a7a939a983c525648227b5fe0a9d41679f Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 21 Jun 2013 01:13:42 +0400 Subject: sh_eth: fix misreporting of transmit abort Due to obviously missing braces, EESR.TABT (transmit abort) interrupt may be reported even if it hasn't happened, just when EESR.TWB (transmit descriptor write-back) interrupt happens. Luckily (?), EESR.TWB is disabled by the driver via the TRIMD register and all the interrupt masks, so that transmit abort is never actually logged... Put the braces where they should be and fix the incoherent comment, while at it. Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index d9c21dd..e29fe8d 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -1552,11 +1552,12 @@ static void sh_eth_error(struct net_device *ndev, int intr_status) ignore_link: if (intr_status & EESR_TWB) { - /* Write buck end. unused write back interrupt */ - if (intr_status & EESR_TABT) /* Transmit Abort int */ + /* Unused write back interrupt */ + if (intr_status & EESR_TABT) { /* Transmit Abort int */ ndev->stats.tx_aborted_errors++; if (netif_msg_tx_err(mdp)) dev_err(&ndev->dev, "Transmit Abort\n"); + } } if (intr_status & EESR_RABT) { -- cgit v0.10.2 From a3c910d2e796ce878231350b904105261a8cf09c Mon Sep 17 00:00:00 2001 From: Shan Wei Date: Fri, 21 Jun 2013 15:18:32 +0800 Subject: tcp: doc : fix the syncookies default value syncookies is on for default since in commit e994b7c901 (tcp: Don't make syn cookies initial setting depend on CONFIG_SYSCTL). And fix a typo of CONFIG_SYN_COOKIES. Signed-off-by: Shan Wei Signed-off-by: David S. Miller diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index f98ca63..3458d63 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -420,10 +420,10 @@ tcp_synack_retries - INTEGER for a passive TCP connection will happen after 63seconds. tcp_syncookies - BOOLEAN - Only valid when the kernel was compiled with CONFIG_SYNCOOKIES + Only valid when the kernel was compiled with CONFIG_SYN_COOKIES Send out syncookies when the syn backlog queue of a socket overflows. This is to prevent against the common 'SYN flood attack' - Default: FALSE + Default: 1 Note, that syncookies is fallback facility. It MUST NOT be used to help highly loaded servers to stand -- cgit v0.10.2 From b90fc27a64a57b273351ceef7ae298558ff8a6ac Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Fri, 21 Jun 2013 19:15:09 +0530 Subject: drivers: net: cpsw: fix compilation error with cpsw driver drivers/net/ethernet/ti/cpsw.c: In function 'cpsw_suspend': drivers/net/ethernet/ti/cpsw.c:1979:26: error: 'priv' undeclared (first use in this function) drivers/net/ethernet/ti/cpsw.c:1979:26: note: each undeclared identifier is reported only once for each function it appears in make[4]: *** [drivers/net/ethernet/ti/cpsw.o] Error 1 The compilation error was introduced by the following commit 6d3d76f (drivers: net: cpsw: fix cpsw clock gating issue across suspend/resume) Signed-off-by: Mugunthan V N Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index e66a202..d1a769f 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1973,6 +1973,7 @@ static int cpsw_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct net_device *ndev = platform_get_drvdata(pdev); + struct cpsw_priv *priv = netdev_priv(ndev); if (netif_running(ndev)) cpsw_ndo_stop(ndev); -- cgit v0.10.2 From f57da7a65b386dd4535daa4f7a3773a025fbb022 Mon Sep 17 00:00:00 2001 From: Shahed Shaikh Date: Fri, 21 Jun 2013 12:09:42 -0400 Subject: qlcnic: Do not sleep while holding spinlock This patch reverts commit a4791254b6625b06aa33e36304f6e8a1a4a1fdea ("qlcnic: change mdelay to msleep") which overwrote a commit 68b3f28c11bf896be32ad2a2e151aaa5f4a7c98e ("qlcnic: Fix scheduling while atomic bug") Signed-off-by: Shahed Shaikh Signed-off-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c index 43562c2..6acf82b 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c @@ -642,7 +642,7 @@ void qlcnic_fw_destroy_ctx(struct qlcnic_adapter *adapter) qlcnic_83xx_config_intrpt(adapter, 0); } /* Allow dma queues to drain after context reset */ - msleep(20); + mdelay(20); } } -- cgit v0.10.2 From eda4ddf7e3a2245888e8c45c566fd514cdd5abbb Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Fri, 21 Jun 2013 13:21:30 +0200 Subject: s390/ipl: Fix FCP WWPN and LUN format strings for read The following git commit changed the behavior of sscanf: commit 53809751ac230a3611b5cdd375f3389f3207d471 Author: Jan Beulich Date: Mon Dec 17 16:01:31 2012 -0800 sscanf: don't ignore field widths for numeric conversions This broke the WWPN and LUN sysfs attributes for s390 reipl and dump on panic. Example: $ echo 0x0123456701234567 > /sys/firmware/reipl/fcp/wwpn $ cat /sys/firmware/reipl/fcp/wwpn 0x0001234567012345 So fix this and use format strings that work also with the new sscanf implementation: $ echo 0x012345670123456789 > /sys/firmware/reipl/fcp/wwpn $ cat /sys/firmware/reipl/fcp/wwpn 0x0123456701234567 Cc: stable@vger.kernel.org # 3.8+ Reviewed-by: Steffen Maier Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index d8a6a38..feb719d 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -754,9 +754,9 @@ static struct bin_attribute sys_reipl_fcp_scp_data_attr = { .write = reipl_fcp_scpdata_write, }; -DEFINE_IPL_ATTR_RW(reipl_fcp, wwpn, "0x%016llx\n", "%016llx\n", +DEFINE_IPL_ATTR_RW(reipl_fcp, wwpn, "0x%016llx\n", "%llx\n", reipl_block_fcp->ipl_info.fcp.wwpn); -DEFINE_IPL_ATTR_RW(reipl_fcp, lun, "0x%016llx\n", "%016llx\n", +DEFINE_IPL_ATTR_RW(reipl_fcp, lun, "0x%016llx\n", "%llx\n", reipl_block_fcp->ipl_info.fcp.lun); DEFINE_IPL_ATTR_RW(reipl_fcp, bootprog, "%lld\n", "%lld\n", reipl_block_fcp->ipl_info.fcp.bootprog); @@ -1323,9 +1323,9 @@ static struct shutdown_action __refdata reipl_action = { /* FCP dump device attributes */ -DEFINE_IPL_ATTR_RW(dump_fcp, wwpn, "0x%016llx\n", "%016llx\n", +DEFINE_IPL_ATTR_RW(dump_fcp, wwpn, "0x%016llx\n", "%llx\n", dump_block_fcp->ipl_info.fcp.wwpn); -DEFINE_IPL_ATTR_RW(dump_fcp, lun, "0x%016llx\n", "%016llx\n", +DEFINE_IPL_ATTR_RW(dump_fcp, lun, "0x%016llx\n", "%llx\n", dump_block_fcp->ipl_info.fcp.lun); DEFINE_IPL_ATTR_RW(dump_fcp, bootprog, "%lld\n", "%lld\n", dump_block_fcp->ipl_info.fcp.bootprog); -- cgit v0.10.2 From 21a31013f774c726bd199526cd673acc6432b21d Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 24 Jun 2013 11:22:53 +0200 Subject: ACPI / dock / PCI: Synchronous handling of dock events for PCI devices The interactions between the ACPI dock driver and the ACPI-based PCI hotplug (acpiphp) are currently problematic because of ordering issues during hot-remove operations. First of all, the current ACPI glue code expects that physical devices will always be deleted before deleting the companion ACPI device objects. Otherwise, acpi_unbind_one() will fail with a warning message printed to the kernel log, for example: [ 185.026073] usb usb5: Oops, 'acpi_handle' corrupt [ 185.035150] pci 0000:1b:00.0: Oops, 'acpi_handle' corrupt [ 185.035515] pci 0000:18:02.0: Oops, 'acpi_handle' corrupt [ 180.013656] port1: Oops, 'acpi_handle' corrupt This means, in particular, that struct pci_dev objects have to be deleted before the struct acpi_device objects they are "glued" with. Now, the following happens the during the undocking of an ACPI-based dock station: 1) hotplug_dock_devices() invokes registered hotplug callbacks to destroy physical devices associated with the ACPI device objects depending on the dock station. It calls dd->ops->handler() for each of those device objects. 2) For PCI devices dd->ops->handler() points to handle_hotplug_event_func() that queues up a separate work item to execute _handle_hotplug_event_func() for the given device and returns immediately. That work item will be executed later. 3) hotplug_dock_devices() calls dock_remove_acpi_device() for each device depending on the dock station. This runs acpi_bus_trim() for each of them, which causes the underlying ACPI device object to be destroyed, but the work items queued up by handle_hotplug_event_func() haven't been started yet. 4) _handle_hotplug_event_func() queued up in step 2) are executed and cause the above failure to happen, because the PCI devices they handle do not have the companion ACPI device objects any more (those objects have been deleted in step 3). The possible breakage doesn't end here, though, because hotplug_dock_devices() may return before at least some of the _handle_hotplug_event_func() work items spawned by it have a chance to complete and then undock() will cause _DCK to be evaluated and that will cause the devices handled by the _handle_hotplug_event_func() to go away possibly while they are being accessed. This means that dd->ops->handler() for PCI devices should not point to handle_hotplug_event_func(). Instead, it should point to a function that will do the work of _handle_hotplug_event_func() synchronously. For this reason, introduce such a function, hotplug_event_func(), and modity acpiphp_dock_ops to point to it as the handler. Unfortunately, however, this is not sufficient, because if the dock code were not changed further, hotplug_event_func() would now deadlock with hotplug_dock_devices() that called it, since it would run unregister_hotplug_dock_device() which in turn would attempt to acquire the dock station's hp_lock mutex already acquired by hotplug_dock_devices(). To resolve that deadlock use the observation that unregister_hotplug_dock_device() won't need to acquire hp_lock if PCI bridges the devices on the dock station depend on are prevented from being removed prematurely while the first loop in hotplug_dock_devices() is in progress. To make that possible, introduce a mechanism by which the callers of register_hotplug_dock_device() can provide "init" and "release" routines that will be executed, respectively, during the addition and removal of the physical device object associated with the given ACPI device handle. Make acpiphp use two new functions, acpiphp_dock_init() and acpiphp_dock_release(), that call get_bridge() and put_bridge(), respectively, on the acpiphp bridge holding the given device, for this purpose. In addition to that, remove the dock station's list of "hotplug devices" and make the dock code always walk the whole list of "dependent devices" instead in such a way that the loops in hotplug_dock_devices() and dock_event() (replacing the loops over "hotplug devices") will take references to the list entries that register_hotplug_dock_device() has been called for. That prevents the "release" routines associated with those entries from being called while the given entry is being processed and for PCI devices this means that their bridges won't be removed (by a concurrent thread) while hotplug_event_func() handling them is being executed. This change is based on two earlier patches from Jiang Liu. References: https://bugzilla.kernel.org/show_bug.cgi?id=59501 Reported-and-tested-by: Alexander E. Patrakov Tracked-down-by: Jiang Liu Tested-by: Illya Klymov Signed-off-by: Rafael J. Wysocki Acked-by: Yinghai Lu Cc: 3.9+ diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index c3b34f9..14de9f4 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -66,20 +66,21 @@ struct dock_station { spinlock_t dd_lock; struct mutex hp_lock; struct list_head dependent_devices; - struct list_head hotplug_devices; struct list_head sibling; struct platform_device *dock_device; }; static LIST_HEAD(dock_stations); static int dock_station_count; +static DEFINE_MUTEX(hotplug_lock); struct dock_dependent_device { struct list_head list; - struct list_head hotplug_list; acpi_handle handle; - const struct acpi_dock_ops *ops; - void *context; + const struct acpi_dock_ops *hp_ops; + void *hp_context; + unsigned int hp_refcount; + void (*hp_release)(void *); }; #define DOCK_DOCKING 0x00000001 @@ -111,7 +112,6 @@ add_dock_dependent_device(struct dock_station *ds, acpi_handle handle) dd->handle = handle; INIT_LIST_HEAD(&dd->list); - INIT_LIST_HEAD(&dd->hotplug_list); spin_lock(&ds->dd_lock); list_add_tail(&dd->list, &ds->dependent_devices); @@ -121,35 +121,90 @@ add_dock_dependent_device(struct dock_station *ds, acpi_handle handle) } /** - * dock_add_hotplug_device - associate a hotplug handler with the dock station - * @ds: The dock station - * @dd: The dependent device struct - * - * Add the dependent device to the dock's hotplug device list + * dock_init_hotplug - Initialize a hotplug device on a docking station. + * @dd: Dock-dependent device. + * @ops: Dock operations to attach to the dependent device. + * @context: Data to pass to the @ops callbacks and @release. + * @init: Optional initialization routine to run after setting up context. + * @release: Optional release routine to run on removal. */ -static void -dock_add_hotplug_device(struct dock_station *ds, - struct dock_dependent_device *dd) +static int dock_init_hotplug(struct dock_dependent_device *dd, + const struct acpi_dock_ops *ops, void *context, + void (*init)(void *), void (*release)(void *)) { - mutex_lock(&ds->hp_lock); - list_add_tail(&dd->hotplug_list, &ds->hotplug_devices); - mutex_unlock(&ds->hp_lock); + int ret = 0; + + mutex_lock(&hotplug_lock); + + if (dd->hp_context) { + ret = -EEXIST; + } else { + dd->hp_refcount = 1; + dd->hp_ops = ops; + dd->hp_context = context; + dd->hp_release = release; + } + + if (!WARN_ON(ret) && init) + init(context); + + mutex_unlock(&hotplug_lock); + return ret; } /** - * dock_del_hotplug_device - remove a hotplug handler from the dock station - * @ds: The dock station - * @dd: the dependent device struct + * dock_release_hotplug - Decrement hotplug reference counter of dock device. + * @dd: Dock-dependent device. * - * Delete the dependent device from the dock's hotplug device list + * Decrement the reference counter of @dd and if 0, detach its hotplug + * operations from it, reset its context pointer and run the optional release + * routine if present. */ -static void -dock_del_hotplug_device(struct dock_station *ds, - struct dock_dependent_device *dd) +static void dock_release_hotplug(struct dock_dependent_device *dd) { - mutex_lock(&ds->hp_lock); - list_del(&dd->hotplug_list); - mutex_unlock(&ds->hp_lock); + void (*release)(void *) = NULL; + void *context = NULL; + + mutex_lock(&hotplug_lock); + + if (dd->hp_context && !--dd->hp_refcount) { + dd->hp_ops = NULL; + context = dd->hp_context; + dd->hp_context = NULL; + release = dd->hp_release; + dd->hp_release = NULL; + } + + if (release && context) + release(context); + + mutex_unlock(&hotplug_lock); +} + +static void dock_hotplug_event(struct dock_dependent_device *dd, u32 event, + bool uevent) +{ + acpi_notify_handler cb = NULL; + bool run = false; + + mutex_lock(&hotplug_lock); + + if (dd->hp_context) { + run = true; + dd->hp_refcount++; + if (dd->hp_ops) + cb = uevent ? dd->hp_ops->uevent : dd->hp_ops->handler; + } + + mutex_unlock(&hotplug_lock); + + if (!run) + return; + + if (cb) + cb(dd->handle, event, dd->hp_context); + + dock_release_hotplug(dd); } /** @@ -360,9 +415,8 @@ static void hotplug_dock_devices(struct dock_station *ds, u32 event) /* * First call driver specific hotplug functions */ - list_for_each_entry(dd, &ds->hotplug_devices, hotplug_list) - if (dd->ops && dd->ops->handler) - dd->ops->handler(dd->handle, event, dd->context); + list_for_each_entry(dd, &ds->dependent_devices, list) + dock_hotplug_event(dd, event, false); /* * Now make sure that an acpi_device is created for each @@ -398,9 +452,8 @@ static void dock_event(struct dock_station *ds, u32 event, int num) if (num == DOCK_EVENT) kobject_uevent_env(&dev->kobj, KOBJ_CHANGE, envp); - list_for_each_entry(dd, &ds->hotplug_devices, hotplug_list) - if (dd->ops && dd->ops->uevent) - dd->ops->uevent(dd->handle, event, dd->context); + list_for_each_entry(dd, &ds->dependent_devices, list) + dock_hotplug_event(dd, event, true); if (num != DOCK_EVENT) kobject_uevent_env(&dev->kobj, KOBJ_CHANGE, envp); @@ -570,19 +623,24 @@ EXPORT_SYMBOL_GPL(unregister_dock_notifier); * @handle: the handle of the device * @ops: handlers to call after docking * @context: device specific data + * @init: Optional initialization routine to run after registration + * @release: Optional release routine to run on unregistration * * If a driver would like to perform a hotplug operation after a dock * event, they can register an acpi_notifiy_handler to be called by * the dock driver after _DCK is executed. */ -int -register_hotplug_dock_device(acpi_handle handle, const struct acpi_dock_ops *ops, - void *context) +int register_hotplug_dock_device(acpi_handle handle, + const struct acpi_dock_ops *ops, void *context, + void (*init)(void *), void (*release)(void *)) { struct dock_dependent_device *dd; struct dock_station *dock_station; int ret = -EINVAL; + if (WARN_ON(!context)) + return -EINVAL; + if (!dock_station_count) return -ENODEV; @@ -597,12 +655,8 @@ register_hotplug_dock_device(acpi_handle handle, const struct acpi_dock_ops *ops * ops */ dd = find_dock_dependent_device(dock_station, handle); - if (dd) { - dd->ops = ops; - dd->context = context; - dock_add_hotplug_device(dock_station, dd); + if (dd && !dock_init_hotplug(dd, ops, context, init, release)) ret = 0; - } } return ret; @@ -624,7 +678,7 @@ void unregister_hotplug_dock_device(acpi_handle handle) list_for_each_entry(dock_station, &dock_stations, sibling) { dd = find_dock_dependent_device(dock_station, handle); if (dd) - dock_del_hotplug_device(dock_station, dd); + dock_release_hotplug(dd); } } EXPORT_SYMBOL_GPL(unregister_hotplug_dock_device); @@ -953,7 +1007,6 @@ static int __init dock_add(acpi_handle handle) mutex_init(&dock_station->hp_lock); spin_lock_init(&dock_station->dd_lock); INIT_LIST_HEAD(&dock_station->sibling); - INIT_LIST_HEAD(&dock_station->hotplug_devices); ATOMIC_INIT_NOTIFIER_HEAD(&dock_notifier_list); INIT_LIST_HEAD(&dock_station->dependent_devices); diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 050b6f9..59df857 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -61,6 +61,7 @@ static DEFINE_MUTEX(bridge_mutex); static void handle_hotplug_event_bridge (acpi_handle, u32, void *); static void acpiphp_sanitize_bus(struct pci_bus *bus); static void acpiphp_set_hpp_values(struct pci_bus *bus); +static void hotplug_event_func(acpi_handle handle, u32 type, void *context); static void handle_hotplug_event_func(acpi_handle handle, u32 type, void *context); static void free_bridge(struct kref *kref); @@ -147,7 +148,7 @@ static int post_dock_fixups(struct notifier_block *nb, unsigned long val, static const struct acpi_dock_ops acpiphp_dock_ops = { - .handler = handle_hotplug_event_func, + .handler = hotplug_event_func, }; /* Check whether the PCI device is managed by native PCIe hotplug driver */ @@ -179,6 +180,20 @@ static bool device_is_managed_by_native_pciehp(struct pci_dev *pdev) return true; } +static void acpiphp_dock_init(void *data) +{ + struct acpiphp_func *func = data; + + get_bridge(func->slot->bridge); +} + +static void acpiphp_dock_release(void *data) +{ + struct acpiphp_func *func = data; + + put_bridge(func->slot->bridge); +} + /* callback routine to register each ACPI PCI slot object */ static acpi_status register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) @@ -298,7 +313,8 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) */ newfunc->flags &= ~FUNC_HAS_EJ0; if (register_hotplug_dock_device(handle, - &acpiphp_dock_ops, newfunc)) + &acpiphp_dock_ops, newfunc, + acpiphp_dock_init, acpiphp_dock_release)) dbg("failed to register dock device\n"); /* we need to be notified when dock events happen @@ -1068,22 +1084,12 @@ static void handle_hotplug_event_bridge(acpi_handle handle, u32 type, alloc_acpi_hp_work(handle, type, context, _handle_hotplug_event_bridge); } -static void _handle_hotplug_event_func(struct work_struct *work) +static void hotplug_event_func(acpi_handle handle, u32 type, void *context) { - struct acpiphp_func *func; + struct acpiphp_func *func = context; char objname[64]; struct acpi_buffer buffer = { .length = sizeof(objname), .pointer = objname }; - struct acpi_hp_work *hp_work; - acpi_handle handle; - u32 type; - - hp_work = container_of(work, struct acpi_hp_work, work); - handle = hp_work->handle; - type = hp_work->type; - func = (struct acpiphp_func *)hp_work->context; - - acpi_scan_lock_acquire(); acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer); @@ -1116,6 +1122,18 @@ static void _handle_hotplug_event_func(struct work_struct *work) warn("notify_handler: unknown event type 0x%x for %s\n", type, objname); break; } +} + +static void _handle_hotplug_event_func(struct work_struct *work) +{ + struct acpi_hp_work *hp_work; + struct acpiphp_func *func; + + hp_work = container_of(work, struct acpi_hp_work, work); + func = hp_work->context; + acpi_scan_lock_acquire(); + + hotplug_event_func(hp_work->handle, hp_work->type, func); acpi_scan_lock_release(); kfree(hp_work); /* allocated in handle_hotplug_event_func */ diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index e6168a2..b420939 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -123,7 +123,9 @@ extern int register_dock_notifier(struct notifier_block *nb); extern void unregister_dock_notifier(struct notifier_block *nb); extern int register_hotplug_dock_device(acpi_handle handle, const struct acpi_dock_ops *ops, - void *context); + void *context, + void (*init)(void *), + void (*release)(void *)); extern void unregister_hotplug_dock_device(acpi_handle handle); #else static inline int is_dock_device(acpi_handle handle) @@ -139,7 +141,9 @@ static inline void unregister_dock_notifier(struct notifier_block *nb) } static inline int register_hotplug_dock_device(acpi_handle handle, const struct acpi_dock_ops *ops, - void *context) + void *context, + void (*init)(void *), + void (*release)(void *)) { return -ENODEV; } -- cgit v0.10.2 From 5aed93875cd88502f04a0d4517b8a2d89a849773 Mon Sep 17 00:00:00 2001 From: Balazs Peter Odor Date: Sat, 22 Jun 2013 19:24:43 +0200 Subject: netfilter: nf_nat_sip: fix mangling In (b20ab9c netfilter: nf_ct_helper: better logging for dropped packets) there were some missing brackets around the logging information, thus always returning drop. Closes https://bugzilla.kernel.org/show_bug.cgi?id=60061 Signed-off-by: Balazs Peter Odor Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/nf_nat_sip.c b/net/netfilter/nf_nat_sip.c index 96ccdf7..dac11f7 100644 --- a/net/netfilter/nf_nat_sip.c +++ b/net/netfilter/nf_nat_sip.c @@ -230,9 +230,10 @@ static unsigned int nf_nat_sip(struct sk_buff *skb, unsigned int protoff, &ct->tuplehash[!dir].tuple.src.u3, false); if (!mangle_packet(skb, protoff, dataoff, dptr, datalen, - poff, plen, buffer, buflen)) + poff, plen, buffer, buflen)) { nf_ct_helper_log(skb, ct, "cannot mangle received"); return NF_DROP; + } } /* The rport= parameter (RFC 3581) contains the port number -- cgit v0.10.2 From 797a7d66d2048fe8a4ac1ba58c5d4752d64b1ac4 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 21 Jun 2013 16:51:30 +0200 Subject: netfilter: ctnetlink: send event when conntrack label was modified commit 0ceabd83875b72a29f33db4ab703d6ba40ea4c58 (netfilter: ctnetlink: deliver labels to userspace) sets the event bit when we raced with another packet, instead of raising the event bit when the label bit is set for the first time. commit 9b21f6a90924dfe8e5e686c314ddb441fb06501e (netfilter: ctnetlink: allow userspace to modify labels) forgot to update the event mask in the "conntrack already exists" case. Both issues result in CTA_LABELS attribute not getting included in the conntrack event. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/nf_conntrack_labels.c b/net/netfilter/nf_conntrack_labels.c index 8fe2e99..355d2ef 100644 --- a/net/netfilter/nf_conntrack_labels.c +++ b/net/netfilter/nf_conntrack_labels.c @@ -45,7 +45,7 @@ int nf_connlabel_set(struct nf_conn *ct, u16 bit) if (test_bit(bit, labels->bits)) return 0; - if (test_and_set_bit(bit, labels->bits)) + if (!test_and_set_bit(bit, labels->bits)) nf_conntrack_event_cache(IPCT_LABEL, ct); return 0; diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index 6d0f8a1..ecf065f 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -1825,6 +1825,7 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb, nf_conntrack_eventmask_report((1 << IPCT_REPLY) | (1 << IPCT_ASSURED) | (1 << IPCT_HELPER) | + (1 << IPCT_LABEL) | (1 << IPCT_PROTOINFO) | (1 << IPCT_NATSEQADJ) | (1 << IPCT_MARK), -- cgit v0.10.2 From ec8da805c43a6cc0252dad0ff6e348c731e0b138 Mon Sep 17 00:00:00 2001 From: Marc Dietrich Date: Mon, 10 Jun 2013 22:27:55 +0200 Subject: mfd: tps6586x: correct device name of the regulator cell Change the device name of the regulator function to the one chosen for MODULE_ALIAS. This fixes kernel auto-module loading for the regulator function. Signed-off-by: Marc Dietrich Signed-off-by: Mark Brown diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c index 721b918..4b93ed4 100644 --- a/drivers/mfd/tps6586x.c +++ b/drivers/mfd/tps6586x.c @@ -107,7 +107,7 @@ static struct mfd_cell tps6586x_cell[] = { .name = "tps6586x-gpio", }, { - .name = "tps6586x-pmic", + .name = "tps6586x-regulator", }, { .name = "tps6586x-rtc", diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c index d8fa37d..2c9155b 100644 --- a/drivers/regulator/tps6586x-regulator.c +++ b/drivers/regulator/tps6586x-regulator.c @@ -439,7 +439,7 @@ static int tps6586x_regulator_remove(struct platform_device *pdev) static struct platform_driver tps6586x_regulator_driver = { .driver = { - .name = "tps6586x-pmic", + .name = "tps6586x-regulator", .owner = THIS_MODULE, }, .probe = tps6586x_regulator_probe, -- cgit v0.10.2 From 8182a34d85698d2fb696bfdafa21140916fd5d47 Mon Sep 17 00:00:00 2001 From: Jonas Jensen Date: Tue, 18 Jun 2013 09:20:50 +0100 Subject: ARM: 7760/1: cpu_fa526_do_idle: remove WFI As it was already suggested by Russell King and Arnd Bergmann: https://lkml.org/lkml/2013/5/16/133 moxart and gemini seem to be the only platforms using CPU_FA526, and instead of pointing arm_pm_idle to an empty function from platform code, it makes sense to remove WFI code from the processor specific idle function. Applies to arm-soc/for-next (and 3.10-rc1). Changes since v1: 1. remove WFI but make sure cpu_fa526_do_idle do not fall through to cpu_fa526_dcache_clean_area Note: moxart boots and prints to UART without this patch, but input is broken. Signed-off-by: Jonas Jensen Signed-off-by: Russell King diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S index d217e97..aaeb6c1 100644 --- a/arch/arm/mm/proc-fa526.S +++ b/arch/arm/mm/proc-fa526.S @@ -81,7 +81,6 @@ ENDPROC(cpu_fa526_reset) */ .align 4 ENTRY(cpu_fa526_do_idle) - mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt mov pc, lr -- cgit v0.10.2 From 1ba9bf0a9ae779c1a2b3eb64951e4161d9bad7a9 Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Wed, 19 Jun 2013 10:36:26 +0100 Subject: ARM: 7762/1: kernel: fix arm_dt_init_cpu_maps() to skip non-cpu nodes The introduction of the cpu-map topology node in the cpus node implies that cpus node might have children that are not cpu nodes. The DT parsing code needs updating otherwise it would check for cpu nodes properties in nodes that are not required to contain them, resulting in warnings that have no bearing on bindings defined in the dts source file. Cc: [3.8+] Signed-off-by: Lorenzo Pieralisi Acked-by: Nicolas Pitre Signed-off-by: Russell King diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index 5af04f6..904cad5 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -92,6 +92,9 @@ void __init arm_dt_init_cpu_maps(void) for_each_child_of_node(cpus, cpu) { u32 hwid; + if (of_node_cmp(cpu->type, "cpu")) + continue; + pr_debug(" * %s...\n", cpu->full_name); /* * A device tree containing CPU nodes with missing "reg" -- cgit v0.10.2 From 18d7f152df31e5a326301fdaad385e40874dff80 Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Wed, 19 Jun 2013 10:40:48 +0100 Subject: ARM: 7763/1: kernel: fix __cpu_logical_map default initialization The __cpu_logical_map array is statically initialized to 0, which is a valid MPIDR value. To prevent issues with the current implementation, this patch defines an MPIDR_INVALID value, and statically initializes the __cpu_logical_map[] array to it. Entries in the arm_dt_init_cpu_maps() tmp_map array used to stash DT reg properties while parsing DT are initialized with the MPIDR_INVALID value as well for consistency. Signed-off-by: Lorenzo Pieralisi Acked-by: Nicolas Pitre Cc: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index 7652712..dba62cb 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -32,6 +32,8 @@ #define MPIDR_HWID_BITMASK 0xFFFFFF +#define MPIDR_INVALID (~MPIDR_HWID_BITMASK) + #define MPIDR_LEVEL_BITS 8 #define MPIDR_LEVEL_MASK ((1 << MPIDR_LEVEL_BITS) - 1) diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h index aaa61b6..e789832 100644 --- a/arch/arm/include/asm/smp_plat.h +++ b/arch/arm/include/asm/smp_plat.h @@ -49,7 +49,7 @@ static inline int cache_ops_need_broadcast(void) /* * Logical CPU mapping. */ -extern int __cpu_logical_map[]; +extern u32 __cpu_logical_map[]; #define cpu_logical_map(cpu) __cpu_logical_map[cpu] /* * Retrieve logical cpu index corresponding to a given MPIDR[23:0] diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index 904cad5..0905502 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -82,7 +82,7 @@ void __init arm_dt_init_cpu_maps(void) u32 i, j, cpuidx = 1; u32 mpidr = is_smp() ? read_cpuid_mpidr() & MPIDR_HWID_BITMASK : 0; - u32 tmp_map[NR_CPUS] = { [0 ... NR_CPUS-1] = UINT_MAX }; + u32 tmp_map[NR_CPUS] = { [0 ... NR_CPUS-1] = MPIDR_INVALID }; bool bootcpu_valid = false; cpus = of_find_node_by_path("/cpus"); diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 1522c7a..b4b1d39 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -444,7 +444,7 @@ void notrace cpu_init(void) : "r14"); } -int __cpu_logical_map[NR_CPUS]; +u32 __cpu_logical_map[NR_CPUS] = { [0 ... NR_CPUS-1] = MPIDR_INVALID }; void __init smp_setup_processor_id(void) { -- cgit v0.10.2 From 63384fd0b1509acf522a8a8fcede09087eedb7df Mon Sep 17 00:00:00 2001 From: Simon Baatz Date: Sat, 22 Jun 2013 22:01:25 +0100 Subject: ARM: 7772/1: Fix missing flush_kernel_dcache_page() for noMMU Commit 1bc3974 (ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page) moved the implementation of flush_kernel_dcache_page() into mm/flush.c but did not implement it on noMMU ARM. Signed-off-by: Simon Baatz Acked-by: Kevin Hilman Cc: # 3.2+: 1bc3974: ARM: 7755/1 Signed-off-by: Russell King diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index d51225f..eb5293a 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -57,6 +57,12 @@ void flush_dcache_page(struct page *page) } EXPORT_SYMBOL(flush_dcache_page); +void flush_kernel_dcache_page(struct page *page) +{ + __cpuc_flush_dcache_area(page_address(page), PAGE_SIZE); +} +EXPORT_SYMBOL(flush_kernel_dcache_page); + void copy_to_user_page(struct vm_area_struct *vma, struct page *page, unsigned long uaddr, void *dst, const void *src, unsigned long len) -- cgit v0.10.2 From 3e0a07f8c401bb43e0f964c5f1285b2cb2028645 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Sun, 23 Jun 2013 10:17:11 +0100 Subject: ARM: 7773/1: PJ4B: Add support for errata 4742 This commit fixes the regression on Armada 370 (the kernal hang during boot) introduced by the commit: "ARM: 7691/1: mm: kill unused TLB_CAN_READ_FROM_L1_CACHE and use ALT_SMP instead". When coming out of either a Wait for Interrupt (WFI) or a Wait for Event (WFE) IDLE states, a specific timing sensitivity exists between the retiring WFI/WFE instructions and the newly issued subsequent instructions. This sensitivity can result in a CPU hang scenario. The workaround is to insert either a Data Synchronization Barrier (DSB) or Data Memory Barrier (DMB) command immediately after the WFI/WFE instruction. This commit was based on the work of Lior Amsalem, but heavily modified to apply the errata fix dynamically according to the processor type thanks to the suggestions of Russell King and Nicolas Pitre. Signed-off-by: Gregory CLEMENT Reviewed-by: Will Deacon Acked-by: Nicolas Pitre Tested-by: Willy Tarreau Cc: Signed-off-by: Russell King diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2651b1d..136f263 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1087,6 +1087,20 @@ if !MMU source "arch/arm/Kconfig-nommu" endif +config PJ4B_ERRATA_4742 + bool "PJ4B Errata 4742: IDLE Wake Up Commands can Cause the CPU Core to Cease Operation" + depends on CPU_PJ4B && MACH_ARMADA_370 + default y + help + When coming out of either a Wait for Interrupt (WFI) or a Wait for + Event (WFE) IDLE states, a specific timing sensitivity exists between + the retiring WFI/WFE instructions and the newly issued subsequent + instructions. This sensitivity can result in a CPU hang scenario. + Workaround: + The software must insert either a Data Synchronization Barrier (DSB) + or Data Memory Barrier (DMB) command immediately after the WFI/WFE + instruction + config ARM_ERRATA_326103 bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory" depends on CPU_V6 diff --git a/arch/arm/include/asm/glue-proc.h b/arch/arm/include/asm/glue-proc.h index ac1dd54..8017e94 100644 --- a/arch/arm/include/asm/glue-proc.h +++ b/arch/arm/include/asm/glue-proc.h @@ -230,6 +230,15 @@ # endif #endif +#ifdef CONFIG_CPU_PJ4B +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_pj4b +# endif +#endif + #ifndef MULTI_CPU #define cpu_proc_init __glue(CPU_NAME,_proc_init) #define cpu_proc_fin __glue(CPU_NAME,_proc_fin) diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index f9a0aa7..e3c48a3 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -333,3 +333,8 @@ ENTRY(\name\()_tlb_fns) .endif .size \name\()_tlb_fns, . - \name\()_tlb_fns .endm + +.macro globl_equ x, y + .globl \x + .equ \x, \y +.endm diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 4c8c9c1..e35fec3 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -140,6 +140,29 @@ ENTRY(cpu_v7_do_resume) ENDPROC(cpu_v7_do_resume) #endif +#ifdef CONFIG_CPU_PJ4B + globl_equ cpu_pj4b_switch_mm, cpu_v7_switch_mm + globl_equ cpu_pj4b_set_pte_ext, cpu_v7_set_pte_ext + globl_equ cpu_pj4b_proc_init, cpu_v7_proc_init + globl_equ cpu_pj4b_proc_fin, cpu_v7_proc_fin + globl_equ cpu_pj4b_reset, cpu_v7_reset +#ifdef CONFIG_PJ4B_ERRATA_4742 +ENTRY(cpu_pj4b_do_idle) + dsb @ WFI may enter a low-power mode + wfi + dsb @barrier + mov pc, lr +ENDPROC(cpu_pj4b_do_idle) +#else + globl_equ cpu_pj4b_do_idle, cpu_v7_do_idle +#endif + globl_equ cpu_pj4b_dcache_clean_area, cpu_v7_dcache_clean_area + globl_equ cpu_pj4b_do_suspend, cpu_v7_do_suspend + globl_equ cpu_pj4b_do_resume, cpu_v7_do_resume + globl_equ cpu_pj4b_suspend_size, cpu_v7_suspend_size + +#endif + __CPUINIT /* @@ -350,6 +373,9 @@ __v7_setup_stack: @ define struct processor (see and proc-macros.S) define_processor_functions v7, dabort=v7_early_abort, pabort=v7_pabort, suspend=1 +#ifdef CONFIG_CPU_PJ4B + define_processor_functions pj4b, dabort=v7_early_abort, pabort=v7_pabort, suspend=1 +#endif .section ".rodata" @@ -362,7 +388,7 @@ __v7_setup_stack: /* * Standard v7 proc info content */ -.macro __v7_proc initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0 +.macro __v7_proc initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0, proc_fns = v7_processor_functions ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \ PMD_SECT_AF | PMD_FLAGS_SMP | \mm_mmuflags) ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \ @@ -375,7 +401,7 @@ __v7_setup_stack: .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_FAST_MULT | \ HWCAP_EDSP | HWCAP_TLS | \hwcaps .long cpu_v7_name - .long v7_processor_functions + .long \proc_fns .long v7wbi_tlb_fns .long v6_user_fns .long v7_cache_fns @@ -407,12 +433,14 @@ __v7_ca9mp_proc_info: /* * Marvell PJ4B processor. */ +#ifdef CONFIG_CPU_PJ4B .type __v7_pj4b_proc_info, #object __v7_pj4b_proc_info: .long 0x560f5800 .long 0xff0fff00 - __v7_proc __v7_pj4b_setup + __v7_proc __v7_pj4b_setup, proc_fns = pj4b_processor_functions .size __v7_pj4b_proc_info, . - __v7_pj4b_proc_info +#endif /* * ARM Ltd. Cortex A7 processor. -- cgit v0.10.2 From c8fc51cfa758be945c6113a4b446e0159070f768 Mon Sep 17 00:00:00 2001 From: Gao feng Date: Mon, 24 Jun 2013 17:04:02 +0800 Subject: netfilter: ipt_ULOG: fix incorrect setting of ulog timer The parameter of setup_timer should be &ulog->nlgroup[i]. the incorrect parameter will cause kernel panic in ulog_timer. Bug introducted in commit 355430671ad93546b34b4e91bdf720f3a704efa4 "netfilter: ipt_ULOG: add net namespace support for ipt_ULOG" ebt_ULOG doesn't have this problem. [ I have mangled this patch to fix nlgroup != 0 case, we were also crashing there --pablo ] Tested-by: George Spelvin Reported-by: Borislav Petkov Signed-off-by: Gao feng Signed-off-by: Pablo Neira Ayuso diff --git a/net/ipv4/netfilter/ipt_ULOG.c b/net/ipv4/netfilter/ipt_ULOG.c index ff4b781..32b0e97 100644 --- a/net/ipv4/netfilter/ipt_ULOG.c +++ b/net/ipv4/netfilter/ipt_ULOG.c @@ -125,15 +125,16 @@ static void ulog_send(struct ulog_net *ulog, unsigned int nlgroupnum) /* timer function to flush queue in flushtimeout time */ static void ulog_timer(unsigned long data) { + unsigned int groupnum = *((unsigned int *)data); struct ulog_net *ulog = container_of((void *)data, struct ulog_net, - nlgroup[*(unsigned int *)data]); + nlgroup[groupnum]); pr_debug("timer function called, calling ulog_send\n"); /* lock to protect against somebody modifying our structure * from ipt_ulog_target at the same time */ spin_lock_bh(&ulog->lock); - ulog_send(ulog, data); + ulog_send(ulog, groupnum); spin_unlock_bh(&ulog->lock); } @@ -407,8 +408,11 @@ static int __net_init ulog_tg_net_init(struct net *net) spin_lock_init(&ulog->lock); /* initialize ulog_buffers */ - for (i = 0; i < ULOG_MAXNLGROUPS; i++) - setup_timer(&ulog->ulog_buffers[i].timer, ulog_timer, i); + for (i = 0; i < ULOG_MAXNLGROUPS; i++) { + ulog->nlgroup[i] = i; + setup_timer(&ulog->ulog_buffers[i].timer, ulog_timer, + (unsigned long)&ulog->nlgroup[i]); + } ulog->nflognl = netlink_kernel_create(net, NETLINK_NFLOG, &cfg); if (!ulog->nflognl) -- cgit v0.10.2 From b37e161388ac3980d5dfb73050e85874b84253eb Mon Sep 17 00:00:00 2001 From: Rojhalat Ibrahim Date: Mon, 17 Jun 2013 16:02:41 +0200 Subject: powerpc/pci: Fix boot panic on mpc83xx (regression) The following commit caused a fatal oops when booting on mpc83xx with a non-express PCI bus (regardless of whether a PCI device is present): commit 50d8f87d2b39313dae9d0a2d9b23d377328f2f7b Author: Rojhalat Ibrahim Date: Mon Apr 8 10:15:28 2013 +0200 powerpc/fsl-pci Make PCIe hotplug work with Freescale PCIe controllers Up to now the PCIe link status on Freescale PCIe controllers was only checked once at boot time. So hotplug did not work. With this patch the link status is checked on every config read. PCIe devices not present at boot time are found after doing 'echo 1 >/sys/bus/pci/rescan'. Signed-off-by: Rojhalat Ibrahim Signed-off-by: Kumar Gala This patch fixes the issue by calling setup_indirect_pci for all device types. fsl_indirect_read_config is now only used for booke/86xx PCIe controllers. Reported-by: Michael Guntsche Cc: Scott Wood Signed-off-by: Rojhalat Ibrahim Signed-off-by: Scott Wood diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 028ac1f..46ac1dd 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -97,22 +97,14 @@ static int fsl_indirect_read_config(struct pci_bus *bus, unsigned int devfn, return indirect_read_config(bus, devfn, offset, len, val); } -static struct pci_ops fsl_indirect_pci_ops = +#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx) + +static struct pci_ops fsl_indirect_pcie_ops = { .read = fsl_indirect_read_config, .write = indirect_write_config, }; -static void __init fsl_setup_indirect_pci(struct pci_controller* hose, - resource_size_t cfg_addr, - resource_size_t cfg_data, u32 flags) -{ - setup_indirect_pci(hose, cfg_addr, cfg_data, flags); - hose->ops = &fsl_indirect_pci_ops; -} - -#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx) - #define MAX_PHYS_ADDR_BITS 40 static u64 pci64_dma_offset = 1ull << MAX_PHYS_ADDR_BITS; @@ -504,13 +496,15 @@ int __init fsl_add_bridge(struct platform_device *pdev, int is_primary) if (!hose->private_data) goto no_bridge; - fsl_setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4, - PPC_INDIRECT_TYPE_BIG_ENDIAN); + setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4, + PPC_INDIRECT_TYPE_BIG_ENDIAN); if (in_be32(&pci->block_rev1) < PCIE_IP_REV_3_0) hose->indirect_type |= PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK; if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) { + /* use fsl_indirect_read_config for PCIe */ + hose->ops = &fsl_indirect_pcie_ops; /* For PCIE read HEADER_TYPE to identify controler mode */ early_read_config_byte(hose, 0, 0, PCI_HEADER_TYPE, &hdr_type); if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE) @@ -814,8 +808,8 @@ int __init mpc83xx_add_bridge(struct device_node *dev) if (ret) goto err0; } else { - fsl_setup_indirect_pci(hose, rsrc_cfg.start, - rsrc_cfg.start + 4, 0); + setup_indirect_pci(hose, rsrc_cfg.start, + rsrc_cfg.start + 4, 0); } printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. " -- cgit v0.10.2 From 44521527be36172864e6e7a6fba4b66e9aa48e40 Mon Sep 17 00:00:00 2001 From: Aaron Lu Date: Thu, 20 Jun 2013 09:38:34 +0800 Subject: libata-acpi: add back ACPI based hotplug functionality Commit 30dcf76acc69 "libata: migrate ACPI code over to new bindings" mistakenly dropped the code to register hotplug notificaion handler for ATA port/devices, causing regression for people using ATA bay, as kernel bug #59871 shows. Fix this by adding back the hotplug notification handler registration code. Since this code has to be run once and notification needs to be installed on every ATA port/devices handle no matter if there is actual device attached, we can't do this in binding time for ATA device ACPI handle, as the binding only occurs when a SCSI device is created, i.e. there is device attached. So introduce the ata_acpi_hotplug_init() function to loop scan all ATA ACPI handles and if it is available, install the notificaion handler for it during ATA init time. With the ATA ACPI handle binding to SCSI device tree, it is possible now that when the SCSI hotplug work removes the SCSI device, the ACPI unbind function will find that the corresponding ACPI device has already been deleted by dock driver, causing a scaring message like: [ 128.263966] scsi 4:0:0:0: Oops, 'acpi_handle' corrupt Fix this by waiting for SCSI hotplug task finish in our notificaion handler, so that the removal of ACPI device done in ACPI unbind function triggered by the removal of SCSI device is run earlier when ACPI device is still available. [rjw: Rebased] References: https://bugzilla.kernel.org/show_bug.cgi?id=59871 Reported-bisected-and-tested-by: Dirk Griesbach Signed-off-by: Aaron Lu Acked-by: Tejun Heo Cc: 3.6+ Signed-off-by: Rafael J. Wysocki diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index 87f2f39..cf4e702 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -156,8 +156,10 @@ static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev, spin_unlock_irqrestore(ap->lock, flags); - if (wait) + if (wait) { ata_port_wait_eh(ap); + flush_work(&ap->hotplug_task.work); + } } static void ata_acpi_dev_notify_dock(acpi_handle handle, u32 event, void *data) @@ -214,6 +216,39 @@ static const struct acpi_dock_ops ata_acpi_ap_dock_ops = { .uevent = ata_acpi_ap_uevent, }; +void ata_acpi_hotplug_init(struct ata_host *host) +{ + int i; + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + acpi_handle handle; + struct ata_device *dev; + + if (!ap) + continue; + + handle = ata_ap_acpi_handle(ap); + if (handle) { + /* we might be on a docking station */ + register_hotplug_dock_device(handle, + &ata_acpi_ap_dock_ops, ap, + NULL, NULL); + } + + ata_for_each_dev(dev, &ap->link, ALL) { + handle = ata_dev_acpi_handle(dev); + if (!handle) + continue; + + /* we might be on a docking station */ + register_hotplug_dock_device(handle, + &ata_acpi_dev_dock_ops, + dev, NULL, NULL); + } + } +} + /** * ata_acpi_dissociate - dissociate ATA host from ACPI objects * @host: target ATA host diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index f218427..adf002a 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -6148,6 +6148,8 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) if (rc) goto err_tadd; + ata_acpi_hotplug_init(host); + /* set cable, sata_spd_limit and report */ for (i = 0; i < host->n_ports; i++) { struct ata_port *ap = host->ports[i]; diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index c949dd3..577d902 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -122,6 +122,7 @@ extern int ata_acpi_register(void); extern void ata_acpi_unregister(void); extern void ata_acpi_bind(struct ata_device *dev); extern void ata_acpi_unbind(struct ata_device *dev); +extern void ata_acpi_hotplug_init(struct ata_host *host); #else static inline void ata_acpi_dissociate(struct ata_host *host) { } static inline int ata_acpi_on_suspend(struct ata_port *ap) { return 0; } @@ -134,6 +135,7 @@ static inline int ata_acpi_register(void) { return 0; } static inline void ata_acpi_unregister(void) { } static inline void ata_acpi_bind(struct ata_device *dev) { } static inline void ata_acpi_unbind(struct ata_device *dev) { } +static inline void ata_acpi_hotplug_init(struct ata_host *host) {} #endif /* libata-scsi.c */ -- cgit v0.10.2 From 426729dcc713b3d1ae802e314030e5556a62da53 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Mon, 24 Jun 2013 11:47:48 -0400 Subject: drm/i915: make compact dma scatter lists creation work with SWIOTLB backend. Git commit 90797e6d1ec0dfde6ba62a48b9ee3803887d6ed4 ("drm/i915: create compact dma scatter lists for gem objects") makes certain assumptions about the under laying DMA API that are not always correct. On a ThinkPad X230 with an Intel HD 4000 with Xen during the bootup I see: [drm:intel_pipe_set_base] *ERROR* pin & fence failed [drm:intel_crtc_set_config] *ERROR* failed to set mode on [CRTC:3], err = -28 Bit of debugging traced it down to dma_map_sg failing (in i915_gem_gtt_prepare_object) as some of the SG entries were huge (3MB). That unfortunately are sizes that the SWIOTLB is incapable of handling - the maximum it can handle is a an entry of 512KB of virtual contiguous memory for its bounce buffer. (See IO_TLB_SEGSIZE). Previous to the above mention git commit the SG entries were of 4KB, and the code introduced by above git commit squashed the CPU contiguous PFNs in one big virtual address provided to DMA API. This patch is a simple semi-revert - were we emulate the old behavior if we detect that SWIOTLB is online. If it is not online then we continue on with the new compact scatter gather mechanism. An alternative solution would be for the the '.get_pages' and the i915_gem_gtt_prepare_object to retry with smaller max gap of the amount of PFNs that can be combined together - but with this issue discovered during rc7 that might be too risky. Reported-and-Tested-by: Konrad Rzeszutek Wilk CC: Chris Wilson CC: Imre Deak CC: Daniel Vetter CC: David Airlie CC: Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index a069741..9e35daf 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1801,7 +1801,14 @@ i915_gem_object_get_pages_gtt(struct drm_i915_gem_object *obj) gfp |= __GFP_NORETRY | __GFP_NOWARN | __GFP_NO_KSWAPD; gfp &= ~(__GFP_IO | __GFP_WAIT); } - +#ifdef CONFIG_SWIOTLB + if (swiotlb_nr_tbl()) { + st->nents++; + sg_set_page(sg, page, PAGE_SIZE, 0); + sg = sg_next(sg); + continue; + } +#endif if (!i || page_to_pfn(page) != last_pfn + 1) { if (i) sg = sg_next(sg); @@ -1812,8 +1819,10 @@ i915_gem_object_get_pages_gtt(struct drm_i915_gem_object *obj) } last_pfn = page_to_pfn(page); } - - sg_mark_end(sg); +#ifdef CONFIG_SWIOTLB + if (!swiotlb_nr_tbl()) +#endif + sg_mark_end(sg); obj->pages = st; if (i915_gem_object_needs_bit17_swizzle(obj)) -- cgit v0.10.2 From 939e17799619e31331d2433041196529515a86a6 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 25 Jun 2013 19:15:17 +0800 Subject: crypto: algboss - Hold ref count on larval On Thu, Jun 20, 2013 at 10:00:21AM +0200, Daniel Borkmann wrote: > After having fixed a NULL pointer dereference in SCTP 1abd165e ("net: > sctp: fix NULL pointer dereference in socket destruction"), I ran into > the following NULL pointer dereference in the crypto subsystem with > the same reproducer, easily hit each time: > > BUG: unable to handle kernel NULL pointer dereference at (null) > IP: [] __wake_up_common+0x31/0x90 > PGD 0 > Oops: 0000 [#1] SMP > Modules linked in: padlock_sha(F-) sha256_generic(F) sctp(F) libcrc32c(F) [..] > CPU: 6 PID: 3326 Comm: cryptomgr_probe Tainted: GF 3.10.0-rc5+ #1 > Hardware name: Dell Inc. PowerEdge T410/0H19HD, BIOS 1.6.3 02/01/2011 > task: ffff88007b6cf4e0 ti: ffff88007b7cc000 task.ti: ffff88007b7cc000 > RIP: 0010:[] [] __wake_up_common+0x31/0x90 > RSP: 0018:ffff88007b7cde08 EFLAGS: 00010082 > RAX: ffffffffffffffe8 RBX: ffff88003756c130 RCX: 0000000000000000 > RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffff88003756c130 > RBP: ffff88007b7cde48 R08: 0000000000000000 R09: ffff88012b173200 > R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000282 > R13: ffff88003756c138 R14: 0000000000000000 R15: 0000000000000000 > FS: 0000000000000000(0000) GS:ffff88012fc60000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b > CR2: 0000000000000000 CR3: 0000000001a0b000 CR4: 00000000000007e0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > Stack: > ffff88007b7cde28 0000000300000000 ffff88007b7cde28 ffff88003756c130 > 0000000000000282 ffff88003756c128 ffffffff81227670 0000000000000000 > ffff88007b7cde78 ffffffff810722b7 ffff88007cdcf000 ffffffff81a90540 > Call Trace: > [] ? crypto_alloc_pcomp+0x20/0x20 > [] complete_all+0x47/0x60 > [] cryptomgr_probe+0x98/0xc0 > [] ? crypto_alloc_pcomp+0x20/0x20 > [] kthread+0xce/0xe0 > [] ? kthread_freezable_should_stop+0x70/0x70 > [] ret_from_fork+0x7c/0xb0 > [] ? kthread_freezable_should_stop+0x70/0x70 > Code: 41 56 41 55 41 54 53 48 83 ec 18 66 66 66 66 90 89 75 cc 89 55 c8 > 4c 8d 6f 08 48 8b 57 08 41 89 cf 4d 89 c6 48 8d 42 e > RIP [] __wake_up_common+0x31/0x90 > RSP > CR2: 0000000000000000 > ---[ end trace b495b19270a4d37e ]--- > > My assumption is that the following is happening: the minimal SCTP > tool runs under ``echo 1 > /proc/sys/net/sctp/auth_enable'', hence > it's making use of crypto_alloc_hash() via sctp_auth_init_hmacs(). > It forks itself, heavily allocates, binds, listens and waits in > accept on sctp sockets, and then randomly kills some of them (no > need for an actual client in this case to hit this). Then, again, > allocating, binding, etc, and then killing child processes. > > The problem that might be happening here is that cryptomgr requests > the module to probe/load through cryptomgr_schedule_probe(), but > before the thread handler cryptomgr_probe() returns, we return from > the wait_for_completion_interruptible() function and probably already > have cleared up larval, thus we run into a NULL pointer dereference > when in cryptomgr_probe() complete_all() is being called. > > If we wait with wait_for_completion() instead, this panic will not > occur anymore. This is valid, because in case a signal is pending, > cryptomgr_probe() returns from probing anyway with properly calling > complete_all(). The use of wait_for_completion_interruptible is intentional so that we don't lock up the thread if a bug causes us to never wake up. This bug is caused by the helper thread using the larval without holding a reference count on it. If the helper thread completes after the original thread requesting for help has gone away and destroyed the larval, then we get the crash above. So the fix is to hold a reference count on the larval. Cc: # 3.6+ Reported-by: Daniel Borkmann Tested-by: Daniel Borkmann Signed-off-by: Herbert Xu diff --git a/crypto/algboss.c b/crypto/algboss.c index 769219b..76fc0b2 100644 --- a/crypto/algboss.c +++ b/crypto/algboss.c @@ -45,10 +45,9 @@ struct cryptomgr_param { } nu32; } attrs[CRYPTO_MAX_ATTRS]; - char larval[CRYPTO_MAX_ALG_NAME]; char template[CRYPTO_MAX_ALG_NAME]; - struct completion *completion; + struct crypto_larval *larval; u32 otype; u32 omask; @@ -87,7 +86,8 @@ static int cryptomgr_probe(void *data) crypto_tmpl_put(tmpl); out: - complete_all(param->completion); + complete_all(¶m->larval->completion); + crypto_alg_put(¶m->larval->alg); kfree(param); module_put_and_exit(0); } @@ -187,18 +187,19 @@ static int cryptomgr_schedule_probe(struct crypto_larval *larval) param->otype = larval->alg.cra_flags; param->omask = larval->mask; - memcpy(param->larval, larval->alg.cra_name, CRYPTO_MAX_ALG_NAME); - - param->completion = &larval->completion; + crypto_alg_get(&larval->alg); + param->larval = larval; thread = kthread_run(cryptomgr_probe, param, "cryptomgr_probe"); if (IS_ERR(thread)) - goto err_free_param; + goto err_put_larval; wait_for_completion_interruptible(&larval->completion); return NOTIFY_STOP; +err_put_larval: + crypto_alg_put(&larval->alg); err_free_param: kfree(param); err_put_module: diff --git a/crypto/api.c b/crypto/api.c index 033a714..3b61803 100644 --- a/crypto/api.c +++ b/crypto/api.c @@ -34,12 +34,6 @@ EXPORT_SYMBOL_GPL(crypto_alg_sem); BLOCKING_NOTIFIER_HEAD(crypto_chain); EXPORT_SYMBOL_GPL(crypto_chain); -static inline struct crypto_alg *crypto_alg_get(struct crypto_alg *alg) -{ - atomic_inc(&alg->cra_refcnt); - return alg; -} - struct crypto_alg *crypto_mod_get(struct crypto_alg *alg) { return try_module_get(alg->cra_module) ? crypto_alg_get(alg) : NULL; diff --git a/crypto/internal.h b/crypto/internal.h index 9ebedae..bd39bfc 100644 --- a/crypto/internal.h +++ b/crypto/internal.h @@ -103,6 +103,12 @@ int crypto_register_notifier(struct notifier_block *nb); int crypto_unregister_notifier(struct notifier_block *nb); int crypto_probing_notify(unsigned long val, void *v); +static inline struct crypto_alg *crypto_alg_get(struct crypto_alg *alg) +{ + atomic_inc(&alg->cra_refcnt); + return alg; +} + static inline void crypto_alg_put(struct crypto_alg *alg) { if (atomic_dec_and_test(&alg->cra_refcnt) && alg->cra_destroy) -- cgit v0.10.2 From 2884d4230867c8a46cf701214051e923301e7429 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Wed, 19 Jun 2013 01:56:54 +0000 Subject: fcoe: Use correct API to set vlan tag for FCoE Ethertype skbs fcoe_xmit was coded such that it would skip the vlan net device/layer and instead set some vlan flags and transmit on the real net device. The real net device has code that would add the vlan tag for fcoe skbs. This avoids some extra processing for data frames and provides a small performance improvement. Since fcoe_xmit was not using the vlan net device, __vlan_put_tag within the real net device's xmit routine was ultimately being called to set the vlan tag. With the below change the behavior of __vlan_put_tag changed slightly, it now sets the skb->protocol = vlan_proto. vlan_proto was not a field being set by fcoe_xmit, so the skb->protocol is now not being set to ETH_P_8021Q, as it should be. This patch converts fcoe_xmit to use the vlan_put_tag routine which will tag the skb and fcoe will continue to transmit fcoe skbs on the real net device. For reference, the below change was the one that altered the __vlan_put_tag behavior. commit 86a9bad3ab6b6f858fd4443b48738cabbb6d094c Author: Patrick McHardy Date: Fri Apr 19 02:04:30 2013 +0000 net: vlan: add protocol argument to packet tagging functions Add a protocol argument to the VLAN packet tagging functions. In case of HW tagging, we need that protocol available in the ndo_start_xmit functions, so it is stored in a new field in the skb. The new field fits into a hole (on 64 bit) and doesn't increase the sks's size. Signed-off-by: Robert Love Acked-by: Neil Horman Acked-by: John Fastabend diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index 292b24f..32ae6c6 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -1656,9 +1656,12 @@ static int fcoe_xmit(struct fc_lport *lport, struct fc_frame *fp) if (fcoe->netdev->priv_flags & IFF_802_1Q_VLAN && fcoe->realdev->features & NETIF_F_HW_VLAN_CTAG_TX) { - skb->vlan_tci = VLAN_TAG_PRESENT | - vlan_dev_vlan_id(fcoe->netdev); + /* must set skb->dev before calling vlan_put_tag */ skb->dev = fcoe->realdev; + skb = __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), + vlan_dev_vlan_id(fcoe->netdev)); + if (!skb) + return -ENOMEM; } else skb->dev = fcoe->netdev; -- cgit v0.10.2 From 1617e40c1eeeeb857ff4b66acee20ed2acc1b5e7 Mon Sep 17 00:00:00 2001 From: Josh Durgin Date: Wed, 12 Jun 2013 14:43:10 -0700 Subject: rbd: fetch object order before using it rbd_dev_v2_header_onetime() fetches striping information, and checks whether the image can be read by compariing the stripe unit to the object size. It determines the object size by shifting the object order, which is 0 at this point since it has not been read yet. Move the call to get the image size and object order before rbd_dev_v2_header_onetime() so it is set before use. Signed-off-by: Josh Durgin Reviewed-by: Sage Weil diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index cc7c60e..7c66173 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -4245,6 +4245,10 @@ static int rbd_dev_v2_header_info(struct rbd_device *rbd_dev) down_write(&rbd_dev->header_rwsem); + ret = rbd_dev_v2_image_size(rbd_dev); + if (ret) + goto out; + if (first_time) { ret = rbd_dev_v2_header_onetime(rbd_dev); if (ret) @@ -4278,10 +4282,6 @@ static int rbd_dev_v2_header_info(struct rbd_device *rbd_dev) "is EXPERIMENTAL!"); } - ret = rbd_dev_v2_image_size(rbd_dev); - if (ret) - goto out; - if (rbd_dev->spec->snap_id == CEPH_NOSNAP) if (rbd_dev->mapping.size != rbd_dev->header.image_size) rbd_dev->mapping.size = rbd_dev->header.image_size; -- cgit v0.10.2 From c28375583b6471c1cb833a628ab6afb5b69079d0 Mon Sep 17 00:00:00 2001 From: Jacob Shin Date: Tue, 25 Jun 2013 22:42:37 +0200 Subject: cpufreq: fix NULL pointer deference at od_set_powersave_bias() When initializing the default powersave_bias value, we need to first make sure that this policy is running the ondemand governor. Reported-and-tested-by: Tim Gardner Signed-off-by: Jacob Shin Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index 4b9bb5d..93eb5cb 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -47,6 +47,8 @@ static struct od_ops od_ops; static struct cpufreq_governor cpufreq_gov_ondemand; #endif +static unsigned int default_powersave_bias; + static void ondemand_powersave_bias_init_cpu(int cpu) { struct od_cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info, cpu); @@ -543,7 +545,7 @@ static int od_init(struct dbs_data *dbs_data) tuners->sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR; tuners->ignore_nice = 0; - tuners->powersave_bias = 0; + tuners->powersave_bias = default_powersave_bias; tuners->io_is_busy = should_io_be_busy(); dbs_data->tuners = tuners; @@ -585,6 +587,7 @@ static void od_set_powersave_bias(unsigned int powersave_bias) unsigned int cpu; cpumask_t done; + default_powersave_bias = powersave_bias; cpumask_clear(&done); get_online_cpus(); @@ -593,11 +596,17 @@ static void od_set_powersave_bias(unsigned int powersave_bias) continue; policy = per_cpu(od_cpu_dbs_info, cpu).cdbs.cur_policy; - dbs_data = policy->governor_data; - od_tuners = dbs_data->tuners; - od_tuners->powersave_bias = powersave_bias; + if (!policy) + continue; cpumask_or(&done, &done, policy->cpus); + + if (policy->governor != &cpufreq_gov_ondemand) + continue; + + dbs_data = policy->governor_data; + od_tuners = dbs_data->tuners; + od_tuners->powersave_bias = default_powersave_bias; } put_online_cpus(); } -- cgit v0.10.2 From ab4eb3537e3f20b2a88467e1f708a136df6e0ecb Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Sat, 22 Jun 2013 11:13:13 +0900 Subject: ipv6: Process unicast packet with Router Alert by checking flag in skb. Router Alert option is marked in skb. Previously, IP6CB(skb)->ra was set to positive value for such packets. Since commit dd3332bf ("ipv6: Store Router Alert option in IP6CB directly."), IP6SKB_ROUTERALERT is set in IP6CB(skb)->flags, and the value of Router Alert option (in network byte order) is set to IP6CB(skb)->ra for such packets. Multicast forwarding path uses that flag and value, but unicast forwarding path does not use the flag and misuses IP6CB(skb)->ra value. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index dae1949..95703ba 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -381,9 +381,8 @@ int ip6_forward(struct sk_buff *skb) * cannot be fragmented, because there is no warranty * that different fragments will go along one path. --ANK */ - if (opt->ra) { - u8 *ptr = skb_network_header(skb) + opt->ra; - if (ip6_call_ra_chain(skb, (ptr[2]<<8) + ptr[3])) + if (unlikely(opt->flags & IP6SKB_ROUTERALERT)) { + if (ip6_call_ra_chain(skb, ntohs(opt->ra))) return 0; } -- cgit v0.10.2 From bd8a7036c06cf15779b31a5397d4afcb12be81ea Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 24 Jun 2013 06:26:00 -0700 Subject: gre: fix a possible skb leak commit 68c331631143 ("v4 GRE: Add TCP segmentation offload for GRE") added a possible skb leak, because it frees only the head of segment list, in case a skb_linearize() call fails. This patch adds a kfree_skb_list() helper to fix the bug. Signed-off-by: Eric Dumazet Cc: Pravin B Shelar Cc: Daniel Borkmann Signed-off-by: David S. Miller diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 9c676eae..dec1748 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -627,6 +627,7 @@ static inline struct rtable *skb_rtable(const struct sk_buff *skb) } extern void kfree_skb(struct sk_buff *skb); +extern void kfree_skb_list(struct sk_buff *segs); extern void skb_tx_error(struct sk_buff *skb); extern void consume_skb(struct sk_buff *skb); extern void __kfree_skb(struct sk_buff *skb); diff --git a/net/core/skbuff.c b/net/core/skbuff.c index cfd777b..1c1738c 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -483,15 +483,8 @@ EXPORT_SYMBOL(skb_add_rx_frag); static void skb_drop_list(struct sk_buff **listp) { - struct sk_buff *list = *listp; - + kfree_skb_list(*listp); *listp = NULL; - - do { - struct sk_buff *this = list; - list = list->next; - kfree_skb(this); - } while (list); } static inline void skb_drop_fraglist(struct sk_buff *skb) @@ -651,6 +644,17 @@ void kfree_skb(struct sk_buff *skb) } EXPORT_SYMBOL(kfree_skb); +void kfree_skb_list(struct sk_buff *segs) +{ + while (segs) { + struct sk_buff *next = segs->next; + + kfree_skb(segs); + segs = next; + } +} +EXPORT_SYMBOL(kfree_skb_list); + /** * skb_tx_error - report an sk_buff xmit error * @skb: buffer that triggered an error diff --git a/net/ipv4/gre.c b/net/ipv4/gre.c index b2e805a..7856d16 100644 --- a/net/ipv4/gre.c +++ b/net/ipv4/gre.c @@ -178,7 +178,7 @@ static struct sk_buff *gre_gso_segment(struct sk_buff *skb, err = __skb_linearize(skb); if (err) { - kfree_skb(segs); + kfree_skb_list(segs); segs = ERR_PTR(err); goto out; } -- cgit v0.10.2 From 7e24bfbe43b545b1689a5f134ed83645b9e34b86 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sun, 23 Jun 2013 17:19:03 +0300 Subject: tun: fix recovery from gup errors get user pages might fail partially in tun zero copy mode. To recover we need to put all pages that we got, but code used a wrong index resulting in double-free errors. Reported-by: Brad Hubbard Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang Acked-by: Neil Horman Signed-off-by: David S. Miller diff --git a/drivers/net/tun.c b/drivers/net/tun.c index bfa9bb4..9c61f87 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1010,8 +1010,10 @@ static int zerocopy_sg_from_iovec(struct sk_buff *skb, const struct iovec *from, return -EMSGSIZE; num_pages = get_user_pages_fast(base, size, 0, &page[i]); if (num_pages != size) { - for (i = 0; i < num_pages; i++) - put_page(page[i]); + int j; + + for (j = 0; j < num_pages; j++) + put_page(page[i + j]); return -EFAULT; } truesize = size * PAGE_SIZE; -- cgit v0.10.2 From 4c7ab054ab4f5d63625508ed6f8a607184cae7c2 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sun, 23 Jun 2013 17:26:58 +0300 Subject: macvtap: fix recovery from gup errors get user pages might fail partially in macvtap zero copy mode. To recover we need to put all pages that we got, but code used a wrong index resulting in double-free errors. Reported-by: Brad Hubbard Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang Signed-off-by: David S. Miller diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c index 59e9605..b6dd6a7 100644 --- a/drivers/net/macvtap.c +++ b/drivers/net/macvtap.c @@ -524,8 +524,10 @@ static int zerocopy_sg_from_iovec(struct sk_buff *skb, const struct iovec *from, return -EMSGSIZE; num_pages = get_user_pages_fast(base, size, 0, &page[i]); if (num_pages != size) { - for (i = 0; i < num_pages; i++) - put_page(page[i]); + int j; + + for (j = 0; j < num_pages; j++) + put_page(page[i + j]); return -EFAULT; } truesize = size * PAGE_SIZE; -- cgit v0.10.2 From dc8482926e2b1006ed6962ac8388cb92aed4efc7 Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Mon, 24 Jun 2013 21:42:40 +0200 Subject: ipv6: check return value of ipv6_get_lladdr We should check the return value of ipv6_get_lladdr in inet6_set_iftoken. A possible situation, which could leave ll_addr unassigned is, when the user removed her link-local address but a global scoped address was already set. In this case the interface would still be IF_READY and not dead. In that case the RS source address is some value from the stack. v2: Daniel Borkmann noted a small indent inconstancy; no semantic changes. Cc: Daniel Borkmann Acked-by: Daniel Borkmann Reviewed-by: Flavio Leitner Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 77b6261..4ab4c38 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -4306,6 +4306,7 @@ static int inet6_set_iftoken(struct inet6_dev *idev, struct in6_addr *token) struct inet6_ifaddr *ifp; struct net_device *dev = idev->dev; bool update_rs = false; + struct in6_addr ll_addr; if (token == NULL) return -EINVAL; @@ -4325,11 +4326,9 @@ static int inet6_set_iftoken(struct inet6_dev *idev, struct in6_addr *token) write_unlock_bh(&idev->lock); - if (!idev->dead && (idev->if_flags & IF_READY)) { - struct in6_addr ll_addr; - - ipv6_get_lladdr(dev, &ll_addr, IFA_F_TENTATIVE | - IFA_F_OPTIMISTIC); + if (!idev->dead && (idev->if_flags & IF_READY) && + !ipv6_get_lladdr(dev, &ll_addr, IFA_F_TENTATIVE | + IFA_F_OPTIMISTIC)) { /* If we're not ready, then normal ifup will take care * of this. Otherwise, we need to request our rs here. -- cgit v0.10.2 From 6d446ec32f169c6a5d9bc90684a8082a6cbe90f6 Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Tue, 25 Jun 2013 15:24:32 +0800 Subject: net/tg3: Avoid delay during MMIO access When the EEH error is the result of a fenced host bridge, MMIO accesses can be very slow (milliseconds) to timeout and return all 1's, thus causing the driver various timeout loops to take way too long and trigger soft-lockup warnings (in addition to taking minutes to recover). It might be worthwhile to check if for any of these cases, ffffffff is a valid possible value, and if not, bail early since that means the HW is either gone or isolated. In the meantime, checking that the PCI channel is offline would be workaround of the problem. Cc: # v3.0+ Signed-off-by: Gavin Shan Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index c777b90..a13463e 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -744,6 +744,9 @@ static int tg3_ape_lock(struct tg3 *tp, int locknum) status = tg3_ape_read32(tp, gnt + off); if (status == bit) break; + if (pci_channel_offline(tp->pdev)) + break; + udelay(10); } @@ -1635,6 +1638,9 @@ static void tg3_wait_for_event_ack(struct tg3 *tp) for (i = 0; i < delay_cnt; i++) { if (!(tr32(GRC_RX_CPU_EVENT) & GRC_RX_CPU_DRIVER_EVENT)) break; + if (pci_channel_offline(tp->pdev)) + break; + udelay(8); } } @@ -1813,6 +1819,9 @@ static int tg3_poll_fw(struct tg3 *tp) for (i = 0; i < 200; i++) { if (tr32(VCPU_STATUS) & VCPU_STATUS_INIT_DONE) return 0; + if (pci_channel_offline(tp->pdev)) + return -ENODEV; + udelay(100); } return -ENODEV; @@ -1823,6 +1832,15 @@ static int tg3_poll_fw(struct tg3 *tp) tg3_read_mem(tp, NIC_SRAM_FIRMWARE_MBOX, &val); if (val == ~NIC_SRAM_FIRMWARE_MBOX_MAGIC1) break; + if (pci_channel_offline(tp->pdev)) { + if (!tg3_flag(tp, NO_FWARE_REPORTED)) { + tg3_flag_set(tp, NO_FWARE_REPORTED); + netdev_info(tp->dev, "No firmware running\n"); + } + + break; + } + udelay(10); } @@ -3520,6 +3538,8 @@ static int tg3_pause_cpu(struct tg3 *tp, u32 cpu_base) tw32(cpu_base + CPU_MODE, CPU_MODE_HALT); if (tr32(cpu_base + CPU_MODE) & CPU_MODE_HALT) break; + if (pci_channel_offline(tp->pdev)) + return -EBUSY; } return (i == iters) ? -EBUSY : 0; @@ -8589,6 +8609,14 @@ static int tg3_stop_block(struct tg3 *tp, unsigned long ofs, u32 enable_bit, boo tw32_f(ofs, val); for (i = 0; i < MAX_WAIT_CNT; i++) { + if (pci_channel_offline(tp->pdev)) { + dev_err(&tp->pdev->dev, + "tg3_stop_block device offline, " + "ofs=%lx enable_bit=%x\n", + ofs, enable_bit); + return -ENODEV; + } + udelay(100); val = tr32(ofs); if ((val & enable_bit) == 0) @@ -8612,6 +8640,13 @@ static int tg3_abort_hw(struct tg3 *tp, bool silent) tg3_disable_ints(tp); + if (pci_channel_offline(tp->pdev)) { + tp->rx_mode &= ~(RX_MODE_ENABLE | TX_MODE_ENABLE); + tp->mac_mode &= ~MAC_MODE_TDE_ENABLE; + err = -ENODEV; + goto err_no_dev; + } + tp->rx_mode &= ~RX_MODE_ENABLE; tw32_f(MAC_RX_MODE, tp->rx_mode); udelay(10); @@ -8660,6 +8695,7 @@ static int tg3_abort_hw(struct tg3 *tp, bool silent) err |= tg3_stop_block(tp, BUFMGR_MODE, BUFMGR_MODE_ENABLE, silent); err |= tg3_stop_block(tp, MEMARB_MODE, MEMARB_MODE_ENABLE, silent); +err_no_dev: for (i = 0; i < tp->irq_cnt; i++) { struct tg3_napi *tnapi = &tp->napi[i]; if (tnapi->hw_status) -- cgit v0.10.2 From 397eada946712b90e0620c378b366bcc6c98c9f6 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Mon, 24 Jun 2013 17:13:23 +0200 Subject: gpio/omap: don't use linear domain mapping for OMAP1 Commit ede4d7a5 ("gpio/omap: convert gpio irq domain to linear mapping") converted the OMAP GPIO driver to use a linear mapping for the GPIO IRQ domain instead of using a legacy mapping. Not using a legacy mapping has a number of benefits but it requires the platform to support SPARSE_IRQ which currently is not supported on OMAP1. So this change caused a regression on OMAP1 platforms [1]. Since this issue is not present on all OMAP2+ platforms, there is no need to revert the driver to use legacy domain mapping for all the platforms. [1]: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg89005.html Signed-off-by: Javier Martinez Canillas Tested-by: Aaro Koskinen Signed-off-by: Tony Lindgren diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index d3f7d2d..4a43036 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -1094,6 +1094,9 @@ static int omap_gpio_probe(struct platform_device *pdev) const struct omap_gpio_platform_data *pdata; struct resource *res; struct gpio_bank *bank; +#ifdef CONFIG_ARCH_OMAP1 + int irq_base; +#endif match = of_match_device(of_match_ptr(omap_gpio_match), dev); @@ -1135,11 +1138,28 @@ static int omap_gpio_probe(struct platform_device *pdev) pdata->get_context_loss_count; } +#ifdef CONFIG_ARCH_OMAP1 + /* + * REVISIT: Once we have OMAP1 supporting SPARSE_IRQ, we can drop + * irq_alloc_descs() and irq_domain_add_legacy() and just use a + * linear IRQ domain mapping for all OMAP platforms. + */ + irq_base = irq_alloc_descs(-1, 0, bank->width, 0); + if (irq_base < 0) { + dev_err(dev, "Couldn't allocate IRQ numbers\n"); + return -ENODEV; + } + bank->domain = irq_domain_add_legacy(node, bank->width, irq_base, + 0, &irq_domain_simple_ops, NULL); +#else bank->domain = irq_domain_add_linear(node, bank->width, &irq_domain_simple_ops, NULL); - if (!bank->domain) +#endif + if (!bank->domain) { + dev_err(dev, "Couldn't register an IRQ domain\n"); return -ENODEV; + } if (bank->regs->set_dataout && bank->regs->clr_dataout) bank->set_dataout = _set_gpio_dataout_reg; -- cgit v0.10.2 From 2976b10f05bd7f6dab9f9e7524451ddfed656a89 Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Thu, 20 Jun 2013 11:36:28 +0200 Subject: perf: Disable monitoring on setuid processes for regular users There was a a bug in setup_new_exec(), whereby the test to disabled perf monitoring was not correct because the new credentials for the process were not yet committed and therefore the get_dumpable() test was never firing. The patch fixes the problem by moving the perf_event test until after the credentials are committed. Signed-off-by: Stephane Eranian Tested-by: Jiri Olsa Acked-by: Peter Zijlstra Cc: Signed-off-by: Ingo Molnar diff --git a/fs/exec.c b/fs/exec.c index 6430195..ffd7a81 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -1135,13 +1135,6 @@ void setup_new_exec(struct linux_binprm * bprm) set_dumpable(current->mm, suid_dumpable); } - /* - * Flush performance counters when crossing a - * security domain: - */ - if (!get_dumpable(current->mm)) - perf_event_exit_task(current); - /* An exec changes our domain. We are no longer part of the thread group */ @@ -1205,6 +1198,15 @@ void install_exec_creds(struct linux_binprm *bprm) commit_creds(bprm->cred); bprm->cred = NULL; + + /* + * Disable monitoring for regular users + * when executing setuid binaries. Must + * wait until new credentials are committed + * by commit_creds() above + */ + if (get_dumpable(current->mm) != SUID_DUMP_USER) + perf_event_exit_task(current); /* * cred_guard_mutex must be held at least to this point to prevent * ptrace_attach() from altering our determination of the task's -- cgit v0.10.2 From 5dbe7c178d3f0a4634f088d9e729f1909b9ddcd1 Mon Sep 17 00:00:00 2001 From: Nicolas Schichan Date: Wed, 26 Jun 2013 17:23:42 +0200 Subject: net: fix kernel deadlock with interface rename and netdev name retrieval. When the kernel (compiled with CONFIG_PREEMPT=n) is performing the rename of a network interface, it can end up waiting for a workqueue to complete. If userland is able to invoke a SIOCGIFNAME ioctl or a SO_BINDTODEVICE getsockopt in between, the kernel will deadlock due to the fact that read_secklock_begin() will spin forever waiting for the writer process (the one doing the interface rename) to update the devnet_rename_seq sequence. This patch fixes the problem by adding a helper (netdev_get_name()) and using it in the code handling the SIOCGIFNAME ioctl and SO_BINDTODEVICE setsockopt. The netdev_get_name() helper uses raw_seqcount_begin() to avoid spinning forever, waiting for devnet_rename_seq->sequence to become even. cond_resched() is used in the contended case, before retrying the access to give the writer process a chance to finish. The use of raw_seqcount_begin() will incur some unneeded work in the reader process in the contended case, but this is better than deadlocking the system. Signed-off-by: Nicolas Schichan Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 60584b1..96e4c21 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1695,6 +1695,7 @@ extern int init_dummy_netdev(struct net_device *dev); extern struct net_device *dev_get_by_index(struct net *net, int ifindex); extern struct net_device *__dev_get_by_index(struct net *net, int ifindex); extern struct net_device *dev_get_by_index_rcu(struct net *net, int ifindex); +extern int netdev_get_name(struct net *net, char *name, int ifindex); extern int dev_restart(struct net_device *dev); #ifdef CONFIG_NETPOLL_TRAP extern int netpoll_trap(void); diff --git a/net/core/dev.c b/net/core/dev.c index fc1e289..faebb39 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -792,6 +792,40 @@ struct net_device *dev_get_by_index(struct net *net, int ifindex) EXPORT_SYMBOL(dev_get_by_index); /** + * netdev_get_name - get a netdevice name, knowing its ifindex. + * @net: network namespace + * @name: a pointer to the buffer where the name will be stored. + * @ifindex: the ifindex of the interface to get the name from. + * + * The use of raw_seqcount_begin() and cond_resched() before + * retrying is required as we want to give the writers a chance + * to complete when CONFIG_PREEMPT is not set. + */ +int netdev_get_name(struct net *net, char *name, int ifindex) +{ + struct net_device *dev; + unsigned int seq; + +retry: + seq = raw_seqcount_begin(&devnet_rename_seq); + rcu_read_lock(); + dev = dev_get_by_index_rcu(net, ifindex); + if (!dev) { + rcu_read_unlock(); + return -ENODEV; + } + + strcpy(name, dev->name); + rcu_read_unlock(); + if (read_seqcount_retry(&devnet_rename_seq, seq)) { + cond_resched(); + goto retry; + } + + return 0; +} + +/** * dev_getbyhwaddr_rcu - find a device by its hardware address * @net: the applicable net namespace * @type: media type of device diff --git a/net/core/dev_ioctl.c b/net/core/dev_ioctl.c index 6cc0481..5b7d0e1 100644 --- a/net/core/dev_ioctl.c +++ b/net/core/dev_ioctl.c @@ -19,9 +19,8 @@ static int dev_ifname(struct net *net, struct ifreq __user *arg) { - struct net_device *dev; struct ifreq ifr; - unsigned seq; + int error; /* * Fetch the caller's info block. @@ -30,19 +29,9 @@ static int dev_ifname(struct net *net, struct ifreq __user *arg) if (copy_from_user(&ifr, arg, sizeof(struct ifreq))) return -EFAULT; -retry: - seq = read_seqcount_begin(&devnet_rename_seq); - rcu_read_lock(); - dev = dev_get_by_index_rcu(net, ifr.ifr_ifindex); - if (!dev) { - rcu_read_unlock(); - return -ENODEV; - } - - strcpy(ifr.ifr_name, dev->name); - rcu_read_unlock(); - if (read_seqcount_retry(&devnet_rename_seq, seq)) - goto retry; + error = netdev_get_name(net, ifr.ifr_name, ifr.ifr_ifindex); + if (error) + return error; if (copy_to_user(arg, &ifr, sizeof(struct ifreq))) return -EFAULT; diff --git a/net/core/sock.c b/net/core/sock.c index 88868a9..d6d024c 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -571,9 +571,7 @@ static int sock_getbindtodevice(struct sock *sk, char __user *optval, int ret = -ENOPROTOOPT; #ifdef CONFIG_NETDEVICES struct net *net = sock_net(sk); - struct net_device *dev; char devname[IFNAMSIZ]; - unsigned seq; if (sk->sk_bound_dev_if == 0) { len = 0; @@ -584,20 +582,9 @@ static int sock_getbindtodevice(struct sock *sk, char __user *optval, if (len < IFNAMSIZ) goto out; -retry: - seq = read_seqcount_begin(&devnet_rename_seq); - rcu_read_lock(); - dev = dev_get_by_index_rcu(net, sk->sk_bound_dev_if); - ret = -ENODEV; - if (!dev) { - rcu_read_unlock(); + ret = netdev_get_name(net, devname, sk->sk_bound_dev_if); + if (ret) goto out; - } - - strcpy(devname, dev->name); - rcu_read_unlock(); - if (read_seqcount_retry(&devnet_rename_seq, seq)) - goto retry; len = strlen(devname) + 1; -- cgit v0.10.2 From a963a37d384d71ad43b3e9e79d68d42fbe0901f3 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 26 Jun 2013 04:15:07 -0700 Subject: ipv6: ip6_sk_dst_check() must not assume ipv6 dst It's possible to use AF_INET6 sockets and to connect to an IPv4 destination. After this, socket dst cache is a pointer to a rtable, not rt6_info. ip6_sk_dst_check() should check the socket dst cache is IPv6, or else various corruptions/crashes can happen. Dave Jones can reproduce immediate crash with trinity -q -l off -n -c sendmsg -c connect With help from Hannes Frederic Sowa Reported-by: Dave Jones Reported-by: Hannes Frederic Sowa Signed-off-by: Eric Dumazet Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 95703ba..d5d20cd 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -821,11 +821,17 @@ static struct dst_entry *ip6_sk_dst_check(struct sock *sk, const struct flowi6 *fl6) { struct ipv6_pinfo *np = inet6_sk(sk); - struct rt6_info *rt = (struct rt6_info *)dst; + struct rt6_info *rt; if (!dst) goto out; + if (dst->ops->family != AF_INET6) { + dst_release(dst); + return NULL; + } + + rt = (struct rt6_info *)dst; /* Yes, checking route validity in not connected * case is not very simple. Take into account, * that we do not support routing by source, TOS, -- cgit v0.10.2 From a5cc68f3d63306d0d288f31edfc2ae6ef8ecd887 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 26 Jun 2013 23:52:30 +0200 Subject: af_key: fix info leaks in notify messages key_notify_sa_flush() and key_notify_policy_flush() miss to initialize the sadb_msg_reserved member of the broadcasted message and thereby leak 2 bytes of heap memory to listeners. Fix that. Signed-off-by: Mathias Krause Cc: Steffen Klassert Cc: "David S. Miller" Cc: Herbert Xu Signed-off-by: David S. Miller diff --git a/net/key/af_key.c b/net/key/af_key.c index c5fbd75..9da8620 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -1710,6 +1710,7 @@ static int key_notify_sa_flush(const struct km_event *c) hdr->sadb_msg_version = PF_KEY_V2; hdr->sadb_msg_errno = (uint8_t) 0; hdr->sadb_msg_len = (sizeof(struct sadb_msg) / sizeof(uint64_t)); + hdr->sadb_msg_reserved = 0; pfkey_broadcast(skb, GFP_ATOMIC, BROADCAST_ALL, NULL, c->net); @@ -2699,6 +2700,7 @@ static int key_notify_policy_flush(const struct km_event *c) hdr->sadb_msg_errno = (uint8_t) 0; hdr->sadb_msg_satype = SADB_SATYPE_UNSPEC; hdr->sadb_msg_len = (sizeof(struct sadb_msg) / sizeof(uint64_t)); + hdr->sadb_msg_reserved = 0; pfkey_broadcast(skb_out, GFP_ATOMIC, BROADCAST_ALL, NULL, c->net); return 0; -- cgit v0.10.2 From 11eb2645cbf38a08ae491bf6c602eea900ec0bb5 Mon Sep 17 00:00:00 2001 From: Zefan Li Date: Wed, 26 Jun 2013 15:29:54 +0800 Subject: dlci: acquire rtnl_lock before calling __dev_get_by_name() Otherwise the net device returned can be freed at anytime. Signed-off-by: Li Zefan Cc: stable@vger.kernel.org Signed-off-by: David S. Miller diff --git a/drivers/net/wan/dlci.c b/drivers/net/wan/dlci.c index 147614e..1f6e053 100644 --- a/drivers/net/wan/dlci.c +++ b/drivers/net/wan/dlci.c @@ -385,20 +385,24 @@ static int dlci_del(struct dlci_add *dlci) struct net_device *master, *slave; int err; + rtnl_lock(); + /* validate slave device */ master = __dev_get_by_name(&init_net, dlci->devname); - if (!master) - return -ENODEV; + if (!master) { + err = -ENODEV; + goto out; + } if (netif_running(master)) { - return -EBUSY; + err = -EBUSY; + goto out; } dlp = netdev_priv(master); slave = dlp->slave; flp = netdev_priv(slave); - rtnl_lock(); err = (*flp->deassoc)(slave, master); if (!err) { list_del(&dlp->list); @@ -407,8 +411,8 @@ static int dlci_del(struct dlci_add *dlci) dev_put(slave); } +out: rtnl_unlock(); - return err; } -- cgit v0.10.2 From 578a1310f2592ba90c5674bca21c1dbd1adf3f0a Mon Sep 17 00:00:00 2001 From: Zefan Li Date: Wed, 26 Jun 2013 15:31:58 +0800 Subject: dlci: validate the net device in dlci_del() We triggered an oops while running trinity with 3.4 kernel: BUG: unable to handle kernel paging request at 0000000100000d07 IP: [] dlci_ioctl+0xd8/0x2d4 [dlci] PGD 640c0d067 PUD 0 Oops: 0000 [#1] PREEMPT SMP CPU 3 ... Pid: 7302, comm: trinity-child3 Not tainted 3.4.24.09+ 40 Huawei Technologies Co., Ltd. Tecal RH2285 /BC11BTSA RIP: 0010:[] [] dlci_ioctl+0xd8/0x2d4 [dlci] ... Call Trace: [] sock_ioctl+0x153/0x280 [] do_vfs_ioctl+0xa4/0x5e0 [] ? fget_light+0x3ea/0x490 [] sys_ioctl+0x4f/0x80 [] system_call_fastpath+0x16/0x1b ... It's because the net device is not a dlci device. Reported-by: Li Jinyue Signed-off-by: Li Zefan Cc: stable@vger.kernel.org Signed-off-by: David S. Miller diff --git a/drivers/net/wan/dlci.c b/drivers/net/wan/dlci.c index 1f6e053..6a8a382 100644 --- a/drivers/net/wan/dlci.c +++ b/drivers/net/wan/dlci.c @@ -384,6 +384,7 @@ static int dlci_del(struct dlci_add *dlci) struct frad_local *flp; struct net_device *master, *slave; int err; + bool found = false; rtnl_lock(); @@ -394,6 +395,17 @@ static int dlci_del(struct dlci_add *dlci) goto out; } + list_for_each_entry(dlp, &dlci_devs, list) { + if (dlp->master == master) { + found = true; + break; + } + } + if (!found) { + err = -ENODEV; + goto out; + } + if (netif_running(master)) { err = -EBUSY; goto out; -- cgit v0.10.2 From d2d1f17a0dad823a4cb71583433d26cd7f734e08 Mon Sep 17 00:00:00 2001 From: Josh Durgin Date: Wed, 26 Jun 2013 12:56:17 -0700 Subject: rbd: send snapshot context with writes Sending the right snapshot context with each write is required for snapshots to work. Due to the ordering of calls, the snapshot context is never set for any requests. This causes writes to the current version of the image to be reflected in all snapshots, which are supposed to be read-only. This happens because rbd_osd_req_format_write() sets the snapshot context based on obj_request->img_request. At this point, however, obj_request->img_request has not been set yet, to the snapshot context is set to NULL. Fix this by moving rbd_img_obj_request_add(), which sets obj_request->img_request, before the osd request formatting calls. This resolves: http://tracker.ceph.com/issues/5465 Reported-by: Karol Jurak Signed-off-by: Josh Durgin Reviewed-by: Sage Weil Reviewed-by: Alex Elder diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 7c66173..c8eb9cb 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -2254,13 +2254,17 @@ static int rbd_img_request_fill(struct rbd_img_request *img_request, obj_request->pages, length, offset & ~PAGE_MASK, false, false); + /* + * set obj_request->img_request before formatting + * the osd_request so that it gets the right snapc + */ + rbd_img_obj_request_add(img_request, obj_request); if (write_request) rbd_osd_req_format_write(obj_request); else rbd_osd_req_format_read(obj_request); obj_request->img_offset = img_offset; - rbd_img_obj_request_add(img_request, obj_request); img_offset += length; resid -= length; -- cgit v0.10.2 From 1abd601864f42a5d10e6fa0b66582591b4497b94 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Thu, 27 Jun 2013 18:00:10 -0300 Subject: powerpc/eeh: Add eeh_dev to the cache during boot commit f8f7d63fd96ead101415a1302035137a866f8998 ("powerpc/eeh: Trace eeh device from I/O cache") broke EEH on pseries for devices that were present during boot and have not been hotplugged/DLPARed. eeh_check_failure will get the eeh_dev from the cache, and will get NULL. eeh_addr_cache_build adds the addresses to the cache, but eeh_dev for the giving pci_device is not set yet. Just reordering the call to eeh_addr_cache_insert_dev works fine. The ordering is similar to the one in eeh_add_device_late. Signed-off-by: Thadeu Lima de Souza Cascardo Acked-by: Gavin Shan Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/platforms/pseries/eeh_cache.c b/arch/powerpc/platforms/pseries/eeh_cache.c index 5a4c879..5ce3ba7 100644 --- a/arch/powerpc/platforms/pseries/eeh_cache.c +++ b/arch/powerpc/platforms/pseries/eeh_cache.c @@ -294,8 +294,6 @@ void __init eeh_addr_cache_build(void) spin_lock_init(&pci_io_addr_cache_root.piar_lock); for_each_pci_dev(dev) { - eeh_addr_cache_insert_dev(dev); - dn = pci_device_to_OF_node(dev); if (!dn) continue; @@ -308,6 +306,8 @@ void __init eeh_addr_cache_build(void) dev->dev.archdata.edev = edev; edev->pdev = dev; + eeh_addr_cache_insert_dev(dev); + eeh_sysfs_add_device(dev); } -- cgit v0.10.2 From 18097b91aaff215e843f04b84ec2c686270bb55f Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 28 Jun 2013 13:27:40 +1000 Subject: drm/qxl: add missing access check for execbuffer ioctl Reported-by: Mathieu Desnoyers Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/qxl/qxl_ioctl.c b/drivers/gpu/drm/qxl/qxl_ioctl.c index a4b71b2..a30f294 100644 --- a/drivers/gpu/drm/qxl/qxl_ioctl.c +++ b/drivers/gpu/drm/qxl/qxl_ioctl.c @@ -171,6 +171,11 @@ static int qxl_execbuffer_ioctl(struct drm_device *dev, void *data, if (user_cmd.command_size > PAGE_SIZE - sizeof(union qxl_release_info)) return -EINVAL; + if (!access_ok(VERIFY_READ, + (void *)(unsigned long)user_cmd.command, + user_cmd.command_size)) + return -EFAULT; + ret = qxl_alloc_release_reserved(qdev, sizeof(union qxl_release_info) + user_cmd.command_size, -- cgit v0.10.2 From c6dc9f0a4eeb7c014904475372c66e6d0ac5a572 Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Fri, 28 Jun 2013 16:53:01 +0100 Subject: mn10300: Allow to pass array name to get_user() This fixes the following compile error: CC block/scsi_ioctl.o block/scsi_ioctl.c: In function 'sg_scsi_ioctl': block/scsi_ioctl.c:449: error: invalid initializer Signed-off-by: David Howells diff --git a/arch/mn10300/include/asm/uaccess.h b/arch/mn10300/include/asm/uaccess.h index 780560b..d7966e0 100644 --- a/arch/mn10300/include/asm/uaccess.h +++ b/arch/mn10300/include/asm/uaccess.h @@ -161,7 +161,7 @@ struct __large_struct { unsigned long buf[100]; }; #define __get_user_check(x, ptr, size) \ ({ \ - const __typeof__(ptr) __guc_ptr = (ptr); \ + const __typeof__(*(ptr))* __guc_ptr = (ptr); \ int _e; \ if (likely(__access_ok((unsigned long) __guc_ptr, (size)))) \ _e = __get_user_nocheck((x), __guc_ptr, (size)); \ -- cgit v0.10.2 From e3f12a53042e26202993baa3ad4ff8768173653d Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Fri, 28 Jun 2013 16:53:03 +0100 Subject: mn10300: Use early_param() to parse "mem=" parameter This fixes the problem that "init=" options may not be passed to kernel correctly. parse_mem_cmdline() of mn10300 arch gets rid of "mem=" string from redboot_command_line. Then init_setup() parses the "init=" options from static_command_line, which is a copy of redboot_command_line, and keeps the pointer to the init options in execute_command variable. Since the commit 026cee0 upstream (params: _initcall-like kernel parameters), static_command_line becomes overwritten by saved_command_line at do_initcall_level(). Notice that saved_command_line is a command line which includes "mem=" string. As a result, execute_command may point to weird string by the length of "mem=" parameter. I noticed this problem when using the command line like this: mem=128M console=ttyS0,115200 init=/bin/sh Here is the processing flow of command line parameters. start_kernel() setup_arch(&command_line) parse_mem_cmdline(cmdline_p) * strcpy(boot_command_line, redboot_command_line); * Remove "mem=xxx" from redboot_command_line. * *cmdline_p = redboot_command_line; setup_command_line(command_line) <-- command_line is redboot_command_line * strcpy(saved_command_line, boot_command_line) * strcpy(static_command_line, command_line) parse_early_param() strlcpy(tmp_cmdline, boot_command_line, COMMAND_LINE_SIZE); parse_early_options(tmp_cmdline); parse_args("early options", cmdline, NULL, 0, 0, 0, do_early_param); parse_args("Booting ..", static_command_line, ...); init_setup() <-- save the pointer in execute_command rest_init() kernel_thread(kernel_init, NULL, CLONE_FS | CLONE_SIGHAND); At this point, execute_command points to "/bin/sh" string. kernel_init() kernel_init_freeable() do_basic_setup() do_initcalls() do_initcall_level() (*) strcpy(static_command_line, saved_command_line); Here, execute_command gets to point to "200" string !! Signed-off-by: David Howells diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c index 33c3bd1..ebac9c1 100644 --- a/arch/mn10300/kernel/setup.c +++ b/arch/mn10300/kernel/setup.c @@ -38,6 +38,7 @@ struct mn10300_cpuinfo boot_cpu_data; /* For PCI or other memory-mapped resources */ unsigned long pci_mem_start = 0x18000000; +static char __initdata cmd_line[COMMAND_LINE_SIZE]; char redboot_command_line[COMMAND_LINE_SIZE] = "console=ttyS0,115200 root=/dev/mtdblock3 rw"; @@ -74,45 +75,19 @@ static const char *const mn10300_cputypes[] = { }; /* - * + * Pick out the memory size. We look for mem=size, + * where size is "size[KkMm]" */ -static void __init parse_mem_cmdline(char **cmdline_p) +static int __init early_mem(char *p) { - char *from, *to, c; - - /* save unparsed command line copy for /proc/cmdline */ - strcpy(boot_command_line, redboot_command_line); - - /* see if there's an explicit memory size option */ - from = redboot_command_line; - to = redboot_command_line; - c = ' '; - - for (;;) { - if (c == ' ' && !memcmp(from, "mem=", 4)) { - if (to != redboot_command_line) - to--; - memory_size = memparse(from + 4, &from); - } - - c = *(from++); - if (!c) - break; - - *(to++) = c; - } - - *to = '\0'; - *cmdline_p = redboot_command_line; + memory_size = memparse(p, &p); if (memory_size == 0) panic("Memory size not known\n"); - memory_end = (unsigned long) CONFIG_KERNEL_RAM_BASE_ADDRESS + - memory_size; - if (memory_end > phys_memory_end) - memory_end = phys_memory_end; + return 0; } +early_param("mem", early_mem); /* * architecture specific setup @@ -125,7 +100,20 @@ void __init setup_arch(char **cmdline_p) cpu_init(); unit_setup(); smp_init_cpus(); - parse_mem_cmdline(cmdline_p); + + /* save unparsed command line copy for /proc/cmdline */ + strlcpy(boot_command_line, redboot_command_line, COMMAND_LINE_SIZE); + + /* populate cmd_line too for later use, preserving boot_command_line */ + strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE); + *cmdline_p = cmd_line; + + parse_early_param(); + + memory_end = (unsigned long) CONFIG_KERNEL_RAM_BASE_ADDRESS + + memory_size; + if (memory_end > phys_memory_end) + memory_end = phys_memory_end; init_mm.start_code = (unsigned long)&_text; init_mm.end_code = (unsigned long) &_etext; -- cgit v0.10.2 From 33f1a63ae84dfd9ad298cf275b8f1887043ced36 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Fri, 28 Jun 2013 14:15:14 +0300 Subject: UBIFS: prepare to fix a horrid bug Al Viro pointed me to the fact that '->readdir()' and '->llseek()' have no mutual exclusion, which means the 'ubifs_dir_llseek()' can be run while we are in the middle of 'ubifs_readdir()'. First of all, this means that 'file->private_data' can be freed while 'ubifs_readdir()' uses it. But this particular patch does not fix the problem. This patch is only a preparation, and the fix will follow next. In this patch we make 'ubifs_readdir()' stop using 'file->f_pos' directly, because 'file->f_pos' can be changed by '->llseek()' at any point. This may lead 'ubifs_readdir()' to returning inconsistent data: directory entry names may correspond to incorrect file positions. So here we introduce a local variable 'pos', read 'file->f_pose' once at very the beginning, and then stick to 'pos'. The result of this is that when 'ubifs_dir_llseek()' changes 'file->f_pos' while we are in the middle of 'ubifs_readdir()', the latter "wins". Cc: stable@vger.kernel.org Reported-by: Al Viro Tested-by: Artem Bityutskiy Signed-off-by: Artem Bityutskiy Signed-off-by: Al Viro diff --git a/fs/ubifs/dir.c b/fs/ubifs/dir.c index de08c92f..8e587af 100644 --- a/fs/ubifs/dir.c +++ b/fs/ubifs/dir.c @@ -349,15 +349,16 @@ static unsigned int vfs_dent_type(uint8_t type) static int ubifs_readdir(struct file *file, void *dirent, filldir_t filldir) { int err, over = 0; + loff_t pos = file->f_pos; struct qstr nm; union ubifs_key key; struct ubifs_dent_node *dent; struct inode *dir = file_inode(file); struct ubifs_info *c = dir->i_sb->s_fs_info; - dbg_gen("dir ino %lu, f_pos %#llx", dir->i_ino, file->f_pos); + dbg_gen("dir ino %lu, f_pos %#llx", dir->i_ino, pos); - if (file->f_pos > UBIFS_S_KEY_HASH_MASK || file->f_pos == 2) + if (pos > UBIFS_S_KEY_HASH_MASK || pos == 2) /* * The directory was seek'ed to a senseless position or there * are no more entries. @@ -365,15 +366,15 @@ static int ubifs_readdir(struct file *file, void *dirent, filldir_t filldir) return 0; /* File positions 0 and 1 correspond to "." and ".." */ - if (file->f_pos == 0) { + if (pos == 0) { ubifs_assert(!file->private_data); over = filldir(dirent, ".", 1, 0, dir->i_ino, DT_DIR); if (over) return 0; - file->f_pos = 1; + file->f_pos = pos = 1; } - if (file->f_pos == 1) { + if (pos == 1) { ubifs_assert(!file->private_data); over = filldir(dirent, "..", 2, 1, parent_ino(file->f_path.dentry), DT_DIR); @@ -389,7 +390,7 @@ static int ubifs_readdir(struct file *file, void *dirent, filldir_t filldir) goto out; } - file->f_pos = key_hash_flash(c, &dent->key); + file->f_pos = pos = key_hash_flash(c, &dent->key); file->private_data = dent; } @@ -397,17 +398,16 @@ static int ubifs_readdir(struct file *file, void *dirent, filldir_t filldir) if (!dent) { /* * The directory was seek'ed to and is now readdir'ed. - * Find the entry corresponding to @file->f_pos or the - * closest one. + * Find the entry corresponding to @pos or the closest one. */ - dent_key_init_hash(c, &key, dir->i_ino, file->f_pos); + dent_key_init_hash(c, &key, dir->i_ino, pos); nm.name = NULL; dent = ubifs_tnc_next_ent(c, &key, &nm); if (IS_ERR(dent)) { err = PTR_ERR(dent); goto out; } - file->f_pos = key_hash_flash(c, &dent->key); + file->f_pos = pos = key_hash_flash(c, &dent->key); file->private_data = dent; } @@ -419,7 +419,7 @@ static int ubifs_readdir(struct file *file, void *dirent, filldir_t filldir) ubifs_inode(dir)->creat_sqnum); nm.len = le16_to_cpu(dent->nlen); - over = filldir(dirent, dent->name, nm.len, file->f_pos, + over = filldir(dirent, dent->name, nm.len, pos, le64_to_cpu(dent->inum), vfs_dent_type(dent->type)); if (over) @@ -435,7 +435,7 @@ static int ubifs_readdir(struct file *file, void *dirent, filldir_t filldir) } kfree(file->private_data); - file->f_pos = key_hash_flash(c, &dent->key); + file->f_pos = pos = key_hash_flash(c, &dent->key); file->private_data = dent; cond_resched(); } -- cgit v0.10.2 From 605c912bb843c024b1ed173dc427cd5c08e5d54d Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Fri, 28 Jun 2013 14:15:15 +0300 Subject: UBIFS: fix a horrid bug Al Viro pointed me to the fact that '->readdir()' and '->llseek()' have no mutual exclusion, which means the 'ubifs_dir_llseek()' can be run while we are in the middle of 'ubifs_readdir()'. This means that 'file->private_data' can be freed while 'ubifs_readdir()' uses it, and this is a very bad bug: not only 'ubifs_readdir()' can return garbage, but this may corrupt memory and lead to all kinds of problems like crashes an security holes. This patch fixes the problem by using the 'file->f_version' field, which '->llseek()' always unconditionally sets to zero. We set it to 1 in 'ubifs_readdir()' and whenever we detect that it became 0, we know there was a seek and it is time to clear the state saved in 'file->private_data'. I tested this patch by writing a user-space program which runds readdir and seek in parallell. I could easily crash the kernel without these patches, but could not crash it with these patches. Cc: stable@vger.kernel.org Reported-by: Al Viro Tested-by: Artem Bityutskiy Signed-off-by: Artem Bityutskiy Signed-off-by: Al Viro diff --git a/fs/ubifs/dir.c b/fs/ubifs/dir.c index 8e587af..605af51 100644 --- a/fs/ubifs/dir.c +++ b/fs/ubifs/dir.c @@ -365,6 +365,24 @@ static int ubifs_readdir(struct file *file, void *dirent, filldir_t filldir) */ return 0; + if (file->f_version == 0) { + /* + * The file was seek'ed, which means that @file->private_data + * is now invalid. This may also be just the first + * 'ubifs_readdir()' invocation, in which case + * @file->private_data is NULL, and the below code is + * basically a no-op. + */ + kfree(file->private_data); + file->private_data = NULL; + } + + /* + * 'generic_file_llseek()' unconditionally sets @file->f_version to + * zero, and we use this for detecting whether the file was seek'ed. + */ + file->f_version = 1; + /* File positions 0 and 1 correspond to "." and ".." */ if (pos == 0) { ubifs_assert(!file->private_data); @@ -438,6 +456,14 @@ static int ubifs_readdir(struct file *file, void *dirent, filldir_t filldir) file->f_pos = pos = key_hash_flash(c, &dent->key); file->private_data = dent; cond_resched(); + + if (file->f_version == 0) + /* + * The file was seek'ed meanwhile, lets return and start + * reading direntries from the new position on the next + * invocation. + */ + return 0; } out: @@ -448,15 +474,13 @@ out: kfree(file->private_data); file->private_data = NULL; + /* 2 is a special value indicating that there are no more direntries */ file->f_pos = 2; return 0; } -/* If a directory is seeked, we have to free saved readdir() state */ static loff_t ubifs_dir_llseek(struct file *file, loff_t offset, int whence) { - kfree(file->private_data); - file->private_data = NULL; return generic_file_llseek(file, offset, whence); } -- cgit v0.10.2 From 706b23bde27a391f0974df2a8351661770fa2e07 Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Fri, 28 Jun 2013 09:49:46 -0400 Subject: Fix: kernel/ptrace.c: ptrace_peek_siginfo() missing __put_user() validation This __put_user() could be used by unprivileged processes to write into kernel memory. The issue here is that even if copy_siginfo_to_user() fails, the error code is not checked before __put_user() is executed. Luckily, ptrace_peek_siginfo() has been added within the 3.10-rc cycle, so it has not hit a stable release yet. Signed-off-by: Mathieu Desnoyers Acked-by: Oleg Nesterov Cc: Andrey Vagin Cc: Roland McGrath Cc: Paul McKenney Cc: David Howells Cc: Dave Jones Cc: Pavel Emelyanov Cc: Pedro Alves Cc: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/ptrace.c b/kernel/ptrace.c index aed981a..335a7ae 100644 --- a/kernel/ptrace.c +++ b/kernel/ptrace.c @@ -665,20 +665,22 @@ static int ptrace_peek_siginfo(struct task_struct *child, if (unlikely(is_compat_task())) { compat_siginfo_t __user *uinfo = compat_ptr(data); - ret = copy_siginfo_to_user32(uinfo, &info); - ret |= __put_user(info.si_code, &uinfo->si_code); + if (copy_siginfo_to_user32(uinfo, &info) || + __put_user(info.si_code, &uinfo->si_code)) { + ret = -EFAULT; + break; + } + } else #endif { siginfo_t __user *uinfo = (siginfo_t __user *) data; - ret = copy_siginfo_to_user(uinfo, &info); - ret |= __put_user(info.si_code, &uinfo->si_code); - } - - if (ret) { - ret = -EFAULT; - break; + if (copy_siginfo_to_user(uinfo, &info) || + __put_user(info.si_code, &uinfo->si_code)) { + ret = -EFAULT; + break; + } } data += sizeof(siginfo_t); -- cgit v0.10.2 From 7846de406f43df98ac9864212dcfe3f2816bdb04 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 10 Jun 2013 10:18:08 -0700 Subject: powerpc/pci: Improve device hotplug initialization Commit 37f02195b (powerpc/pci: fix PCI-e devices rescan issue on powerpc platform) fixes a problem with interrupt and DMA initialization on hot plugged devices. With this commit, interrupt and DMA initialization for hot plugged devices is handled in the pci device enable function. This approach has a couple of drawbacks. First, it creates two code paths for device initialization, one for hot plugged devices and another for devices known during the initial PCI scan. Second, the initialization code for hot plugged devices is only called when the device is enabled, ie typically in the probe function. Also, the platform specific setup code is called each time pci_enable_device() is called, not only once during device discovery, meaning it is actually called multiple times, once for devices discovered during the initial scan and again each time a driver is re-loaded. The visible result is that interrupt pins are only assigned to hot plugged devices when the device driver is loaded. Effectively this changes the PCI probe API, since pci_dev->irq and the device's dma configuration will now only be valid after pci_enable() was called at least once. A more subtle change is that platform specific PCI device setup is moved from device discovery into the driver's probe function, more specifically into the pci_enable_device() call. To fix the inconsistencies, add new function pcibios_add_device. Call pcibios_setup_device from pcibios_setup_bus_devices if device setup is not complete, and from pcibios_add_device if bus setup is complete. With this change, device setup code is moved back into device initialization, and called exactly once for both static and hot plugged devices. [ This also fixes a regression introduced by the above patch which causes dev->irq to be overwritten under some cirumstances after MSIs have been enabled for the device which leads to crashes due to the MSI core "hijacking" dev->irq to store the base MSI number and not the LSI. --BenH ] Cc: Yuanquan Chen Cc: Benjamin Herrenschmidt Cc: Hiroo Matsumoto Signed-off-by: Guenter Roeck Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index eabeec9..f46914a 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -994,7 +994,7 @@ void pcibios_setup_bus_self(struct pci_bus *bus) ppc_md.pci_dma_bus_setup(bus); } -void pcibios_setup_device(struct pci_dev *dev) +static void pcibios_setup_device(struct pci_dev *dev) { /* Fixup NUMA node as it may not be setup yet by the generic * code and is needed by the DMA init @@ -1015,6 +1015,17 @@ void pcibios_setup_device(struct pci_dev *dev) ppc_md.pci_irq_fixup(dev); } +int pcibios_add_device(struct pci_dev *dev) +{ + /* + * We can only call pcibios_setup_device() after bus setup is complete, + * since some of the platform specific DMA setup code depends on it. + */ + if (dev->bus->is_added) + pcibios_setup_device(dev); + return 0; +} + void pcibios_setup_bus_devices(struct pci_bus *bus) { struct pci_dev *dev; @@ -1469,10 +1480,6 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) if (ppc_md.pcibios_enable_device_hook(dev)) return -EINVAL; - /* avoid pcie irq fix up impact on cardbus */ - if (dev->hdr_type != PCI_HEADER_TYPE_CARDBUS) - pcibios_setup_device(dev); - return pci_enable_resources(dev, mask); } -- cgit v0.10.2 From 8d5bc1a6ac40885078bbb0552b4283a3e58c462e Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sat, 29 Jun 2013 16:25:14 -0700 Subject: ARM: dt: Only print warning, not WARN() on bad cpu map in device tree Due to recent changes and expecations of proper cpu bindings, there are now cases for many of the in-tree devicetrees where a WARN() will hit on boot due to badly formatted /cpus nodes. Downgrade this to a pr_warn() to be less alarmist, since it's not a new problem. Tested on Arndale, Cubox, Seaboard and Panda ES. Panda hits the WARN without this, the others do not. Acked-by: Russell King Signed-off-by: Olof Johansson Signed-off-by: Linus Torvalds diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index 0905502..5859c8b 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -152,9 +152,10 @@ void __init arm_dt_init_cpu_maps(void) tmp_map[i] = hwid; } - if (WARN(!bootcpu_valid, "DT missing boot CPU MPIDR[23:0], " - "fall back to default cpu_logical_map\n")) + if (!bootcpu_valid) { + pr_warn("DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map\n"); return; + } /* * Since the boot CPU node contains proper data, and all nodes have -- cgit v0.10.2 From ea461abf61753b4b79e625a7c20650105b990f21 Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Wed, 5 Jun 2013 15:34:02 +0800 Subject: powerpc/eeh: Fix fetching bus for single-dev-PE While running Linux as guest on top of phyp, we possiblly have PE that includes single PCI device. However, we didn't return its PCI bus correctly and it leads to failure on recovery from EEH errors for single-dev-PE. The patch fixes the issue. Cc: # v3.7+ Cc: Steve Best Signed-off-by: Gavin Shan Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/platforms/pseries/eeh_pe.c b/arch/powerpc/platforms/pseries/eeh_pe.c index fe43d1a..9d4a9e8 100644 --- a/arch/powerpc/platforms/pseries/eeh_pe.c +++ b/arch/powerpc/platforms/pseries/eeh_pe.c @@ -639,7 +639,8 @@ struct pci_bus *eeh_pe_bus_get(struct eeh_pe *pe) if (pe->type & EEH_PE_PHB) { bus = pe->phb->bus; - } else if (pe->type & EEH_PE_BUS) { + } else if (pe->type & EEH_PE_BUS || + pe->type & EEH_PE_DEVICE) { edev = list_first_entry(&pe->edevs, struct eeh_dev, list); pdev = eeh_dev_to_pci_dev(edev); if (pdev) -- cgit v0.10.2 From 8bb495e3f02401ee6f76d1b1d77f3ac9f079e376 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 30 Jun 2013 15:13:29 -0700 Subject: Linux 3.10 diff --git a/Makefile b/Makefile index 0142c93..e5e3ba0 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 10 SUBLEVEL = 0 -EXTRAVERSION = -rc7 +EXTRAVERSION = NAME = Unicycling Gorilla # *DOCUMENTATION* -- cgit v0.10.2