From a9524a76f70f3343e4be27f95a7e92a8ba5f9009 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sun, 30 Oct 2005 14:39:11 -0500 Subject: [libata] use dev_printk() throughout drivers A few drivers were not following the standard meme of printing out their driver name and version at module load time; this is fixed as well. diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 5efb3c5..e2a5657 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -41,6 +41,7 @@ #include #include #include +#include #include "scsi.h" #include #include @@ -674,10 +675,10 @@ static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs * if (!ahci_host_intr(ap, qc)) if (ata_ratelimit()) { struct pci_dev *pdev = - to_pci_dev(ap->host_set->dev); - printk(KERN_WARNING - "ahci(%s): unhandled interrupt on port %u\n", - pci_name(pdev), i); + to_pci_dev(ap->host_set->dev); + dev_printk(KERN_WARNING, &pdev->dev, + "unhandled interrupt on port %u\n", + i); } VPRINTK("port %u\n", i); @@ -685,10 +686,9 @@ static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs * VPRINTK("port %u (no irq)\n", i); if (ata_ratelimit()) { struct pci_dev *pdev = - to_pci_dev(ap->host_set->dev); - printk(KERN_WARNING - "ahci(%s): interrupt on disabled port %u\n", - pci_name(pdev), i); + to_pci_dev(ap->host_set->dev); + dev_printk(KERN_WARNING, &pdev->dev, + "interrupt on disabled port %u\n", i); } } @@ -760,8 +760,8 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent) tmp = readl(mmio + HOST_CTL); if (tmp & HOST_RESET) { - printk(KERN_ERR DRV_NAME "(%s): controller reset failed (0x%x)\n", - pci_name(pdev), tmp); + dev_printk(KERN_ERR, &pdev->dev, + "controller reset failed (0x%x)\n", tmp); return -EIO; } @@ -789,22 +789,22 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent) if (rc) { rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); if (rc) { - printk(KERN_ERR DRV_NAME "(%s): 64-bit DMA enable failed\n", - pci_name(pdev)); + dev_printk(KERN_ERR, &pdev->dev, + "64-bit DMA enable failed\n"); return rc; } } } else { rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); if (rc) { - printk(KERN_ERR DRV_NAME "(%s): 32-bit DMA enable failed\n", - pci_name(pdev)); + dev_printk(KERN_ERR, &pdev->dev, + "32-bit DMA enable failed\n"); return rc; } rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); if (rc) { - printk(KERN_ERR DRV_NAME "(%s): 32-bit consistent DMA enable failed\n", - pci_name(pdev)); + dev_printk(KERN_ERR, &pdev->dev, + "32-bit consistent DMA enable failed\n"); return rc; } } @@ -907,10 +907,10 @@ static void ahci_print_info(struct ata_probe_ent *probe_ent) else scc_s = "unknown"; - printk(KERN_INFO DRV_NAME "(%s) AHCI %02x%02x.%02x%02x " + dev_printk(KERN_INFO, &pdev->dev, + "AHCI %02x%02x.%02x%02x " "%u slots %u ports %s Gbps 0x%x impl %s mode\n" , - pci_name(pdev), (vers >> 24) & 0xff, (vers >> 16) & 0xff, @@ -923,11 +923,11 @@ static void ahci_print_info(struct ata_probe_ent *probe_ent) impl, scc_s); - printk(KERN_INFO DRV_NAME "(%s) flags: " + dev_printk(KERN_INFO, &pdev->dev, + "flags: " "%s%s%s%s%s%s" "%s%s%s%s%s%s%s\n" , - pci_name(pdev), cap & (1 << 31) ? "64bit " : "", cap & (1 << 30) ? "ncq " : "", @@ -960,7 +960,7 @@ static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) VPRINTK("ENTER\n"); if (!printed_version++) - printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); rc = pci_enable_device(pdev); if (rc) diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c index 74b3b2c..665017e 100644 --- a/drivers/scsi/pdc_adma.c +++ b/drivers/scsi/pdc_adma.c @@ -40,6 +40,7 @@ #include #include #include +#include #include "scsi.h" #include #include @@ -626,16 +627,14 @@ static int adma_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base) rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); if (rc) { - printk(KERN_ERR DRV_NAME - "(%s): 32-bit DMA enable failed\n", - pci_name(pdev)); + dev_printk(KERN_ERR, &pdev->dev, + "32-bit DMA enable failed\n"); return rc; } rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); if (rc) { - printk(KERN_ERR DRV_NAME - "(%s): 32-bit consistent DMA enable failed\n", - pci_name(pdev)); + dev_printk(KERN_ERR, &pdev->dev, + "32-bit consistent DMA enable failed\n"); return rc; } return 0; @@ -651,7 +650,7 @@ static int adma_ata_init_one(struct pci_dev *pdev, int rc, port_no; if (!printed_version++) - printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); rc = pci_enable_device(pdev); if (rc) diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 936d1ce..46dbdee 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -29,6 +29,7 @@ #include #include #include +#include #include "scsi.h" #include #include @@ -1437,9 +1438,9 @@ static void mv_print_info(struct ata_probe_ent *probe_ent) else scc_s = "unknown"; - printk(KERN_INFO DRV_NAME - "(%s) %u slots %u ports %s mode IRQ via %s\n", - pci_name(pdev), (unsigned)MV_MAX_Q_DEPTH, probe_ent->n_ports, + dev_printk(KERN_INFO, &pdev->dev, + "%u slots %u ports %s mode IRQ via %s\n", + (unsigned)MV_MAX_Q_DEPTH, probe_ent->n_ports, scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx"); } @@ -1460,9 +1461,8 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) void __iomem *mmio_base; int pci_dev_busy = 0, rc; - if (!printed_version++) { - printk(KERN_INFO DRV_NAME " version " DRV_VERSION "\n"); - } + if (!printed_version++) + dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n"); rc = pci_enable_device(pdev); if (rc) { diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index 1a56d6c..d573888 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -61,6 +61,7 @@ #include #include #include +#include #include "scsi.h" #include #include @@ -383,7 +384,7 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) return -ENODEV; if (!printed_version++) - printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); rc = pci_enable_device(pdev); if (rc) diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 8f41702..b41c977 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -38,6 +38,7 @@ #include #include #include +#include #include "scsi.h" #include #include @@ -633,7 +634,7 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e int rc; if (!printed_version++) - printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); /* * If this driver happens to only be useful on Apple's K2, then diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index d95a02f..9938dae 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -35,6 +35,7 @@ #include #include #include +#include #include "scsi.h" #include #include @@ -600,25 +601,22 @@ static int qs_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base) if (rc) { rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); if (rc) { - printk(KERN_ERR DRV_NAME - "(%s): 64-bit DMA enable failed\n", - pci_name(pdev)); + dev_printk(KERN_ERR, &pdev->dev, + "64-bit DMA enable failed\n"); return rc; } } } else { rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); if (rc) { - printk(KERN_ERR DRV_NAME - "(%s): 32-bit DMA enable failed\n", - pci_name(pdev)); + dev_printk(KERN_ERR, &pdev->dev, + "32-bit DMA enable failed\n"); return rc; } rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); if (rc) { - printk(KERN_ERR DRV_NAME - "(%s): 32-bit consistent DMA enable failed\n", - pci_name(pdev)); + dev_printk(KERN_ERR, &pdev->dev, + "32-bit consistent DMA enable failed\n"); return rc; } } @@ -635,7 +633,7 @@ static int qs_ata_init_one(struct pci_dev *pdev, int rc, port_no; if (!printed_version++) - printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); rc = pci_enable_device(pdev); if (rc) diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index 3a05617..435f7e0 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -41,6 +41,7 @@ #include #include #include +#include #include "scsi.h" #include #include @@ -386,7 +387,7 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) u8 cls; if (!printed_version++) - printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); /* * If this driver happens to only be useful on Apple's K2, then @@ -463,8 +464,8 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) writeb(cls, mmio_base + SIL_FIFO_W3); } } else - printk(KERN_WARNING DRV_NAME "(%s): cache line size not set. Driver may not function\n", - pci_name(pdev)); + dev_printk(KERN_WARNING, &pdev->dev, + "cache line size not set. Driver may not function\n"); if (ent->driver_data == sil_3114) { irq_mask = SIL_MASK_4PORT; diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 4afe2b1..c665480 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include "scsi.h" #include @@ -690,7 +691,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) int i, rc; if (!printed_version++) - printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); rc = pci_enable_device(pdev); if (rc) @@ -750,14 +751,14 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) */ rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); if (rc) { - printk(KERN_ERR DRV_NAME "(%s): 32-bit DMA enable failed\n", - pci_name(pdev)); + dev_printk(KERN_ERR, &pdev->dev, + "32-bit DMA enable failed\n"); goto out_free; } rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); if (rc) { - printk(KERN_ERR DRV_NAME "(%s): 32-bit consistent DMA enable failed\n", - pci_name(pdev)); + dev_printk(KERN_ERR, &pdev->dev, + "32-bit consistent DMA enable failed\n"); goto out_free; } @@ -793,9 +794,8 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) break; } if (tmp & PORT_CS_PORT_RST) - printk(KERN_ERR DRV_NAME - "(%s): failed to clear port RST\n", - pci_name(pdev)); + dev_printk(KERN_ERR, &pdev->dev, + "failed to clear port RST\n"); } /* Zero error counters. */ @@ -824,9 +824,8 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* Reset itself */ if (__sil24_reset_controller(port)) - printk(KERN_ERR DRV_NAME - "(%s): failed to reset controller\n", - pci_name(pdev)); + dev_printk(KERN_ERR, &pdev->dev, + "failed to reset controller\n"); } /* Turn on interrupts */ diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c index 057f7b9..42288be 100644 --- a/drivers/scsi/sata_sis.c +++ b/drivers/scsi/sata_sis.c @@ -38,6 +38,7 @@ #include #include #include +#include #include "scsi.h" #include #include @@ -237,6 +238,7 @@ static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { + static int printed_version; struct ata_probe_ent *probe_ent = NULL; int rc; u32 genctl; @@ -245,6 +247,9 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) u8 pmr; u8 port2_start; + if (!printed_version++) + dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n"); + rc = pci_enable_device(pdev); if (rc) return rc; @@ -288,16 +293,18 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) pci_read_config_byte(pdev, SIS_PMR, &pmr); if (ent->device != 0x182) { if ((pmr & SIS_PMR_COMBINED) == 0) { - printk(KERN_INFO "sata_sis: Detected SiS 180/181 chipset in SATA mode\n"); + dev_printk(KERN_INFO, &pdev->dev, + "Detected SiS 180/181 chipset in SATA mode\n"); port2_start = 64; } else { - printk(KERN_INFO "sata_sis: Detected SiS 180/181 chipset in combined mode\n"); + dev_printk(KERN_INFO, &pdev->dev, + "Detected SiS 180/181 chipset in combined mode\n"); port2_start=0; } } else { - printk(KERN_INFO "sata_sis: Detected SiS 182 chipset\n"); + dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182 chipset\n"); port2_start = 0x20; } diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c index 46208f5..db615ff 100644 --- a/drivers/scsi/sata_svw.c +++ b/drivers/scsi/sata_svw.c @@ -44,6 +44,7 @@ #include #include #include +#include #include "scsi.h" #include #include @@ -362,7 +363,7 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e int i; if (!printed_version++) - printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); /* * If this driver happens to only be useful on Apple's K2, then diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index d9a8baf..0ec21e0 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -38,6 +38,7 @@ #include #include #include +#include #include "scsi.h" #include #include @@ -1385,7 +1386,7 @@ static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id * int rc; if (!printed_version++) - printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); /* * If this driver happens to only be useful on Apple's K2, then diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c index d68dc7d..a5e245c 100644 --- a/drivers/scsi/sata_uli.c +++ b/drivers/scsi/sata_uli.c @@ -32,6 +32,7 @@ #include #include #include +#include #include "scsi.h" #include #include @@ -178,12 +179,16 @@ static void uli_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { + static int printed_version; struct ata_probe_ent *probe_ent; struct ata_port_info *ppi; int rc; unsigned int board_idx = (unsigned int) ent->driver_data; int pci_dev_busy = 0; + if (!printed_version++) + dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n"); + rc = pci_enable_device(pdev); if (rc) return rc; diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c index 80e291a..b3ecdbe 100644 --- a/drivers/scsi/sata_via.c +++ b/drivers/scsi/sata_via.c @@ -41,6 +41,7 @@ #include #include #include +#include #include "scsi.h" #include #include @@ -259,15 +260,15 @@ static void svia_configure(struct pci_dev *pdev) u8 tmp8; pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8); - printk(KERN_INFO DRV_NAME "(%s): routed to hard irq line %d\n", - pci_name(pdev), + dev_printk(KERN_INFO, &pdev->dev, "routed to hard irq line %d\n", (int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f); /* make sure SATA channels are enabled */ pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8); if ((tmp8 & ALL_PORTS) != ALL_PORTS) { - printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channels (0x%x)\n", - pci_name(pdev), (int) tmp8); + dev_printk(KERN_DEBUG, &pdev->dev, + "enabling SATA channels (0x%x)\n", + (int) tmp8); tmp8 |= ALL_PORTS; pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8); } @@ -275,8 +276,9 @@ static void svia_configure(struct pci_dev *pdev) /* make sure interrupts for each channel sent to us */ pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8); if ((tmp8 & ALL_PORTS) != ALL_PORTS) { - printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channel interrupts (0x%x)\n", - pci_name(pdev), (int) tmp8); + dev_printk(KERN_DEBUG, &pdev->dev, + "enabling SATA channel interrupts (0x%x)\n", + (int) tmp8); tmp8 |= ALL_PORTS; pci_write_config_byte(pdev, SATA_INT_GATE, tmp8); } @@ -284,8 +286,9 @@ static void svia_configure(struct pci_dev *pdev) /* make sure native mode is enabled */ pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8); if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) { - printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channel native mode (0x%x)\n", - pci_name(pdev), (int) tmp8); + dev_printk(KERN_DEBUG, &pdev->dev, + "enabling SATA channel native mode (0x%x)\n", + (int) tmp8); tmp8 |= NATIVE_MODE_ALL; pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8); } @@ -303,7 +306,7 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) u8 tmp8; if (!printed_version++) - printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); rc = pci_enable_device(pdev); if (rc) @@ -318,8 +321,9 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (board_id == vt6420) { pci_read_config_byte(pdev, SATA_PATA_SHARING, &tmp8); if (tmp8 & SATA_2DEV) { - printk(KERN_ERR DRV_NAME "(%s): SATA master/slave not supported (0x%x)\n", - pci_name(pdev), (int) tmp8); + dev_printk(KERN_ERR, &pdev->dev, + "SATA master/slave not supported (0x%x)\n", + (int) tmp8); rc = -EIO; goto err_out_regions; } @@ -332,10 +336,11 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++) if ((pci_resource_start(pdev, i) == 0) || (pci_resource_len(pdev, i) < bar_sizes[i])) { - printk(KERN_ERR DRV_NAME "(%s): invalid PCI BAR %u (sz 0x%lx, val 0x%lx)\n", - pci_name(pdev), i, - pci_resource_start(pdev, i), - pci_resource_len(pdev, i)); + dev_printk(KERN_ERR, &pdev->dev, + "invalid PCI BAR %u (sz 0x%lx, val 0x%lx)\n", + i, + pci_resource_start(pdev, i), + pci_resource_len(pdev, i)); rc = -ENODEV; goto err_out_regions; } @@ -353,8 +358,7 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent = vt6421_init_probe_ent(pdev); if (!probe_ent) { - printk(KERN_ERR DRV_NAME "(%s): out of memory\n", - pci_name(pdev)); + dev_printk(KERN_ERR, &pdev->dev, "out of memory\n"); rc = -ENOMEM; goto err_out_regions; } diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index 54273e0..bb84ba0 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -42,6 +42,7 @@ #include #include #include +#include #include "scsi.h" #include #include @@ -295,7 +296,7 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d int rc; if (!printed_version++) - printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); rc = pci_enable_device(pdev); if (rc) -- cgit v0.10.2