From 92ed4d69934a1281abcc10c6a82274a04651a260 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Wed, 10 Feb 2010 16:51:45 -0600 Subject: [SCSI] libiscsi: reset cmd timer if cmds are making progress This patch resets the cmd timer if cmds started before the timedout command are making progress. The idea is that the cmd probably timed out because we are trying to exeucte too many commands. If it turns out that the device the IO timedout on was bad or the cmd just got screwed up but other IO/devs were ok then we will will figure this out when the cmds ahead of the timed out one complete ok. This also fixes a bug where we were sort of detecting this by setting the last_timeout and last_xfer to the same value when the task was allocated. That caught the case where we never got to send any IO for it. However, if the problem had started right before we started the new task, then we were forced to wait an extra cmd timeout seconds to start the scsi eh. Signed-off-by: Mike Christie Signed-off-by: James Bottomley diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index c28a712..703eb6a 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1919,10 +1919,11 @@ static int iscsi_has_ping_timed_out(struct iscsi_conn *conn) static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc) { enum blk_eh_timer_return rc = BLK_EH_NOT_HANDLED; - struct iscsi_task *task = NULL; + struct iscsi_task *task = NULL, *running_task; struct iscsi_cls_session *cls_session; struct iscsi_session *session; struct iscsi_conn *conn; + int i; cls_session = starget_to_session(scsi_target(sc->device)); session = cls_session->dd_data; @@ -1947,8 +1948,15 @@ static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc) } task = (struct iscsi_task *)sc->SCp.ptr; - if (!task) + if (!task) { + /* + * Raced with completion. Just reset timer, and let it + * complete normally + */ + rc = BLK_EH_RESET_TIMER; goto done; + } + /* * If we have sent (at least queued to the network layer) a pdu or * recvd one for the task since the last timeout ask for @@ -1956,10 +1964,10 @@ static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc) * we can check if it is the task or connection when we send the * nop as a ping. */ - if (time_after_eq(task->last_xfer, task->last_timeout)) { + if (time_after(task->last_xfer, task->last_timeout)) { ISCSI_DBG_EH(session, "Command making progress. Asking " "scsi-ml for more time to complete. " - "Last data recv at %lu. Last timeout was at " + "Last data xfer at %lu. Last timeout was at " "%lu\n.", task->last_xfer, task->last_timeout); task->have_checked_conn = false; rc = BLK_EH_RESET_TIMER; @@ -1977,6 +1985,43 @@ static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc) goto done; } + for (i = 0; i < conn->session->cmds_max; i++) { + running_task = conn->session->cmds[i]; + if (!running_task->sc || running_task == task || + running_task->state != ISCSI_TASK_RUNNING) + continue; + + /* + * Only check if cmds started before this one have made + * progress, or this could never fail + */ + if (time_after(running_task->sc->jiffies_at_alloc, + task->sc->jiffies_at_alloc)) + continue; + + if (time_after(running_task->last_xfer, task->last_timeout)) { + /* + * This task has not made progress, but a task + * started before us has transferred data since + * we started/last-checked. We could be queueing + * too many tasks or the LU is bad. + * + * If the device is bad the cmds ahead of us on + * other devs will complete, and this loop will + * eventually fail starting the scsi eh. + */ + ISCSI_DBG_EH(session, "Command has not made progress " + "but commands ahead of it have. " + "Asking scsi-ml for more time to " + "complete. Our last xfer vs running task " + "last xfer %lu/%lu. Last check %lu.\n", + task->last_xfer, running_task->last_xfer, + task->last_timeout); + rc = BLK_EH_RESET_TIMER; + goto done; + } + } + /* Assumes nop timeout is shorter than scsi cmd timeout */ if (task->have_checked_conn) goto done; -- cgit v0.10.2