From e857f141945f29c16f72ffcfdbce097f8be6c4e9 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Fri, 19 May 2006 16:33:03 -0400 Subject: [PATCH] sata_mv: spurious interrupt workaround The 60xx chips, and possibly others, incorrectly assert DEV_IRQ interrupts on a regular basis. The cause of this is under investigation (by me and in theory by Marvell also), but regardless we do need to deal with these events. This patch tidies up some interrupt handler code, and ensures that we ignore DEV_IRQ interrupts when the drive still has ATA_BUSY asserted. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index bb2409e..65dc653 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -1380,12 +1380,12 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, struct ata_port *ap = host_set->ports[port]; struct mv_port_priv *pp = ap->private_data; - hard_port = port & MV_PORT_MASK; /* range 0-3 */ + hard_port = mv_hardport_from_port(port); /* range 0..3 */ handled = 0; /* ensure ata_status is set if handled++ */ /* Note that DEV_IRQ might happen spuriously during EDMA, - * and should be ignored in such cases. We could mask it, - * but it's pretty rare and may not be worth the overhead. + * and should be ignored in such cases. + * The cause of this is still under investigation. */ if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) { /* EDMA: check for response queue interrupt */ @@ -1399,6 +1399,11 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, ata_status = readb((void __iomem *) ap->ioaddr.status_addr); handled = 1; + /* ignore spurious intr if drive still BUSY */ + if (ata_status & ATA_BUSY) { + ata_status = 0; + handled = 0; + } } } -- cgit v0.10.2