From 615a4d12e55690269ce07e183553cb2752e1fa29 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 21 Aug 2013 22:33:56 -0500 Subject: staging: r8188eu: Add files for new driver - part 14 This commit adds files hal/rtl8188e_hal_init.c, hal/rtl8188e_mp.c, hal/rtl8188e_phycfg.c, and hal/rtl8188e_rf6052.c. Signed-off-by: Larry Finger Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c b/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c new file mode 100644 index 0000000..292ba62 --- /dev/null +++ b/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c @@ -0,0 +1,2378 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * + ******************************************************************************/ +#define _HAL_INIT_C_ + +#include +#include + +#include + +#include + +#include + +static void iol_mode_enable(struct adapter *padapter, u8 enable) +{ + u8 reg_0xf0 = 0; + + if (enable) { + /* Enable initial offload */ + reg_0xf0 = rtw_read8(padapter, REG_SYS_CFG); + rtw_write8(padapter, REG_SYS_CFG, reg_0xf0|SW_OFFLOAD_EN); + + if (!padapter->bFWReady) { + DBG_88E("bFWReady == false call reset 8051...\n"); + _8051Reset88E(padapter); + } + + } else { + /* disable initial offload */ + reg_0xf0 = rtw_read8(padapter, REG_SYS_CFG); + rtw_write8(padapter, REG_SYS_CFG, reg_0xf0 & ~SW_OFFLOAD_EN); + } +} + +static s32 iol_execute(struct adapter *padapter, u8 control) +{ + s32 status = _FAIL; + u8 reg_0x88 = 0; + u32 start = 0, passing_time = 0; + + control = control&0x0f; + reg_0x88 = rtw_read8(padapter, REG_HMEBOX_E0); + rtw_write8(padapter, REG_HMEBOX_E0, reg_0x88|control); + + start = rtw_get_current_time(); + while ((reg_0x88 = rtw_read8(padapter, REG_HMEBOX_E0)) & control && + (passing_time = rtw_get_passing_time_ms(start)) < 1000) { + ; + } + + reg_0x88 = rtw_read8(padapter, REG_HMEBOX_E0); + status = (reg_0x88 & control) ? _FAIL : _SUCCESS; + if (reg_0x88 & control<<4) + status = _FAIL; + return status; +} + +static s32 iol_InitLLTTable(struct adapter *padapter, u8 txpktbuf_bndy) +{ + s32 rst = _SUCCESS; + iol_mode_enable(padapter, 1); + rtw_write8(padapter, REG_TDECTRL+1, txpktbuf_bndy); + rst = iol_execute(padapter, CMD_INIT_LLT); + iol_mode_enable(padapter, 0); + return rst; +} + +static void +efuse_phymap_to_logical(u8 *phymap, u16 _offset, u16 _size_byte, u8 *pbuf) +{ + u8 *efuseTbl = NULL; + u8 rtemp8; + u16 eFuse_Addr = 0; + u8 offset, wren; + u16 i, j; + u16 **eFuseWord = NULL; + u16 efuse_utilized = 0; + u8 u1temp = 0; + + efuseTbl = (u8 *)rtw_zmalloc(EFUSE_MAP_LEN_88E); + if (efuseTbl == NULL) { + DBG_88E("%s: alloc efuseTbl fail!\n", __func__); + goto exit; + } + + eFuseWord = (u16 **)rtw_malloc2d(EFUSE_MAX_SECTION_88E, EFUSE_MAX_WORD_UNIT, sizeof(u16)); + if (eFuseWord == NULL) { + DBG_88E("%s: alloc eFuseWord fail!\n", __func__); + goto exit; + } + + /* 0. Refresh efuse init map as all oxFF. */ + for (i = 0; i < EFUSE_MAX_SECTION_88E; i++) + for (j = 0; j < EFUSE_MAX_WORD_UNIT; j++) + eFuseWord[i][j] = 0xFFFF; + + /* */ + /* 1. Read the first byte to check if efuse is empty!!! */ + /* */ + /* */ + rtemp8 = *(phymap+eFuse_Addr); + if (rtemp8 != 0xFF) { + efuse_utilized++; + eFuse_Addr++; + } else { + DBG_88E("EFUSE is empty efuse_Addr-%d efuse_data =%x\n", eFuse_Addr, rtemp8); + goto exit; + } + + /* */ + /* 2. Read real efuse content. Filter PG header and every section data. */ + /* */ + while ((rtemp8 != 0xFF) && (eFuse_Addr < EFUSE_REAL_CONTENT_LEN_88E)) { + /* Check PG header for section num. */ + if ((rtemp8 & 0x1F) == 0x0F) { /* extended header */ + u1temp = ((rtemp8 & 0xE0) >> 5); + rtemp8 = *(phymap+eFuse_Addr); + if ((rtemp8 & 0x0F) == 0x0F) { + eFuse_Addr++; + rtemp8 = *(phymap+eFuse_Addr); + + if (rtemp8 != 0xFF && (eFuse_Addr < EFUSE_REAL_CONTENT_LEN_88E)) + eFuse_Addr++; + continue; + } else { + offset = ((rtemp8 & 0xF0) >> 1) | u1temp; + wren = (rtemp8 & 0x0F); + eFuse_Addr++; + } + } else { + offset = ((rtemp8 >> 4) & 0x0f); + wren = (rtemp8 & 0x0f); + } + + if (offset < EFUSE_MAX_SECTION_88E) { + /* Get word enable value from PG header */ + for (i = 0; i < EFUSE_MAX_WORD_UNIT; i++) { + /* Check word enable condition in the section */ + if (!(wren & 0x01)) { + rtemp8 = *(phymap+eFuse_Addr); + eFuse_Addr++; + efuse_utilized++; + eFuseWord[offset][i] = (rtemp8 & 0xff); + if (eFuse_Addr >= EFUSE_REAL_CONTENT_LEN_88E) + break; + rtemp8 = *(phymap+eFuse_Addr); + eFuse_Addr++; + efuse_utilized++; + eFuseWord[offset][i] |= (((u16)rtemp8 << 8) & 0xff00); + + if (eFuse_Addr >= EFUSE_REAL_CONTENT_LEN_88E) + break; + } + wren >>= 1; + } + } + /* Read next PG header */ + rtemp8 = *(phymap+eFuse_Addr); + + if (rtemp8 != 0xFF && (eFuse_Addr < EFUSE_REAL_CONTENT_LEN_88E)) { + efuse_utilized++; + eFuse_Addr++; + } + } + + /* */ + /* 3. Collect 16 sections and 4 word unit into Efuse map. */ + /* */ + for (i = 0; i < EFUSE_MAX_SECTION_88E; i++) { + for (j = 0; j < EFUSE_MAX_WORD_UNIT; j++) { + efuseTbl[(i*8)+(j*2)] = (eFuseWord[i][j] & 0xff); + efuseTbl[(i*8)+((j*2)+1)] = ((eFuseWord[i][j] >> 8) & 0xff); + } + } + + /* */ + /* 4. Copy from Efuse map to output pointer memory!!! */ + /* */ + for (i = 0; i < _size_byte; i++) + pbuf[i] = efuseTbl[_offset+i]; + + /* */ + /* 5. Calculate Efuse utilization. */ + /* */ + +exit: + kfree(efuseTbl); + + if (eFuseWord) + rtw_mfree2d((void *)eFuseWord, EFUSE_MAX_SECTION_88E, EFUSE_MAX_WORD_UNIT, sizeof(u16)); +} + +static void efuse_read_phymap_from_txpktbuf( + struct adapter *adapter, + int bcnhead, /* beacon head, where FW store len(2-byte) and efuse physical map. */ + u8 *content, /* buffer to store efuse physical map */ + u16 *size /* for efuse content: the max byte to read. will update to byte read */ + ) +{ + u16 dbg_addr = 0; + u32 start = 0, passing_time = 0; + u8 reg_0x143 = 0; + u32 lo32 = 0, hi32 = 0; + u16 len = 0, count = 0; + int i = 0; + u16 limit = *size; + + u8 *pos = content; + + if (bcnhead < 0) /* if not valid */ + bcnhead = rtw_read8(adapter, REG_TDECTRL+1); + + DBG_88E("%s bcnhead:%d\n", __func__, bcnhead); + + rtw_write8(adapter, REG_PKT_BUFF_ACCESS_CTRL, TXPKT_BUF_SELECT); + + dbg_addr = bcnhead*128/8; /* 8-bytes addressing */ + + while (1) { + rtw_write16(adapter, REG_PKTBUF_DBG_ADDR, dbg_addr+i); + + rtw_write8(adapter, REG_TXPKTBUF_DBG, 0); + start = rtw_get_current_time(); + while (!(reg_0x143 = rtw_read8(adapter, REG_TXPKTBUF_DBG)) && + (passing_time = rtw_get_passing_time_ms(start)) < 1000) { + DBG_88E("%s polling reg_0x143:0x%02x, reg_0x106:0x%02x\n", __func__, reg_0x143, rtw_read8(adapter, 0x106)); + rtw_usleep_os(100); + } + + lo32 = rtw_read32(adapter, REG_PKTBUF_DBG_DATA_L); + hi32 = rtw_read32(adapter, REG_PKTBUF_DBG_DATA_H); + + if (i == 0) { + u8 lenc[2]; + u16 lenbak, aaabak; + u16 aaa; + lenc[0] = rtw_read8(adapter, REG_PKTBUF_DBG_DATA_L); + lenc[1] = rtw_read8(adapter, REG_PKTBUF_DBG_DATA_L+1); + + aaabak = le16_to_cpup((__le16 *)lenc); + lenbak = le16_to_cpu(*((__le16 *)lenc)); + aaa = le16_to_cpup((__le16 *)&lo32); + len = le16_to_cpu(*((__le16 *)&lo32)); + + limit = (len-2 < limit) ? len-2 : limit; + + DBG_88E("%s len:%u, lenbak:%u, aaa:%u, aaabak:%u\n", __func__, len, lenbak, aaa, aaabak); + + memcpy(pos, ((u8 *)&lo32)+2, (limit >= count+2) ? 2 : limit-count); + count += (limit >= count+2) ? 2 : limit-count; + pos = content+count; + + } else { + memcpy(pos, ((u8 *)&lo32), (limit >= count+4) ? 4 : limit-count); + count += (limit >= count+4) ? 4 : limit-count; + pos = content+count; + } + + if (limit > count && len-2 > count) { + memcpy(pos, (u8 *)&hi32, (limit >= count+4) ? 4 : limit-count); + count += (limit >= count+4) ? 4 : limit-count; + pos = content+count; + } + + if (limit <= count || len-2 <= count) + break; + i++; + } + rtw_write8(adapter, REG_PKT_BUFF_ACCESS_CTRL, DISABLE_TRXPKT_BUF_ACCESS); + DBG_88E("%s read count:%u\n", __func__, count); + *size = count; +} + +static s32 iol_read_efuse(struct adapter *padapter, u8 txpktbuf_bndy, u16 offset, u16 size_byte, u8 *logical_map) +{ + s32 status = _FAIL; + u8 physical_map[512]; + u16 size = 512; + + rtw_write8(padapter, REG_TDECTRL+1, txpktbuf_bndy); + _rtw_memset(physical_map, 0xFF, 512); + rtw_write8(padapter, REG_PKT_BUFF_ACCESS_CTRL, TXPKT_BUF_SELECT); + status = iol_execute(padapter, CMD_READ_EFUSE_MAP); + if (status == _SUCCESS) + efuse_read_phymap_from_txpktbuf(padapter, txpktbuf_bndy, physical_map, &size); + efuse_phymap_to_logical(physical_map, offset, size_byte, logical_map); + return status; +} + +s32 rtl8188e_iol_efuse_patch(struct adapter *padapter) +{ + s32 result = _SUCCESS; + + DBG_88E("==> %s\n", __func__); + if (rtw_IOL_applied(padapter)) { + iol_mode_enable(padapter, 1); + result = iol_execute(padapter, CMD_READ_EFUSE_MAP); + if (result == _SUCCESS) + result = iol_execute(padapter, CMD_EFUSE_PATCH); + + iol_mode_enable(padapter, 0); + } + return result; +} + +static s32 iol_ioconfig(struct adapter *padapter, u8 iocfg_bndy) +{ + s32 rst = _SUCCESS; + + rtw_write8(padapter, REG_TDECTRL+1, iocfg_bndy); + rst = iol_execute(padapter, CMD_IOCONFIG); + return rst; +} + +static int rtl8188e_IOL_exec_cmds_sync(struct adapter *adapter, struct xmit_frame *xmit_frame, u32 max_wating_ms, u32 bndy_cnt) +{ + struct pkt_attrib *pattrib = &xmit_frame->attrib; + u8 i; + int ret = _FAIL; + + if (rtw_IOL_append_END_cmd(xmit_frame) != _SUCCESS) + goto exit; + if (rtw_usb_bulk_size_boundary(adapter, TXDESC_SIZE+pattrib->last_txcmdsz)) { + if (rtw_IOL_append_END_cmd(xmit_frame) != _SUCCESS) + goto exit; + } + + dump_mgntframe_and_wait(adapter, xmit_frame, max_wating_ms); + + iol_mode_enable(adapter, 1); + for (i = 0; i < bndy_cnt; i++) { + u8 page_no = 0; + page_no = i*2; + ret = iol_ioconfig(adapter, page_no); + if (ret != _SUCCESS) + break; + } + iol_mode_enable(adapter, 0); +exit: + /* restore BCN_HEAD */ + rtw_write8(adapter, REG_TDECTRL+1, 0); + return ret; +} + +void rtw_IOL_cmd_tx_pkt_buf_dump(struct adapter *Adapter, int data_len) +{ + u32 fifo_data, reg_140; + u32 addr, rstatus, loop = 0; + u16 data_cnts = (data_len/8)+1; + u8 *pbuf = rtw_zvmalloc(data_len+10); + DBG_88E("###### %s ######\n", __func__); + + rtw_write8(Adapter, REG_PKT_BUFF_ACCESS_CTRL, TXPKT_BUF_SELECT); + if (pbuf) { + for (addr = 0; addr < data_cnts; addr++) { + rtw_write32(Adapter, 0x140, addr); + rtw_usleep_os(2); + loop = 0; + do { + rstatus = (reg_140 = rtw_read32(Adapter, REG_PKTBUF_DBG_CTRL)&BIT24); + if (rstatus) { + fifo_data = rtw_read32(Adapter, REG_PKTBUF_DBG_DATA_L); + memcpy(pbuf+(addr*8), &fifo_data, 4); + + fifo_data = rtw_read32(Adapter, REG_PKTBUF_DBG_DATA_H); + memcpy(pbuf+(addr*8+4), &fifo_data, 4); + } + rtw_usleep_os(2); + } while (!rstatus && (loop++ < 10)); + } + rtw_IOL_cmd_buf_dump(Adapter, data_len, pbuf); + rtw_vmfree(pbuf, data_len+10); + } + DBG_88E("###### %s ######\n", __func__); +} + +static void _FWDownloadEnable(struct adapter *padapter, bool enable) +{ + u8 tmp; + + if (enable) { + /* MCU firmware download enable. */ + tmp = rtw_read8(padapter, REG_MCUFWDL); + rtw_write8(padapter, REG_MCUFWDL, tmp | 0x01); + + /* 8051 reset */ + tmp = rtw_read8(padapter, REG_MCUFWDL+2); + rtw_write8(padapter, REG_MCUFWDL+2, tmp&0xf7); + } else { + /* MCU firmware download disable. */ + tmp = rtw_read8(padapter, REG_MCUFWDL); + rtw_write8(padapter, REG_MCUFWDL, tmp&0xfe); + + /* Reserved for fw extension. */ + rtw_write8(padapter, REG_MCUFWDL+1, 0x00); + } +} + +#define MAX_REG_BOLCK_SIZE 196 + +static int _BlockWrite(struct adapter *padapter, void *buffer, u32 buffSize) +{ + int ret = _SUCCESS; + u32 blockSize_p1 = 4; /* (Default) Phase #1 : PCI muse use 4-byte write to download FW */ + u32 blockSize_p2 = 8; /* Phase #2 : Use 8-byte, if Phase#1 use big size to write FW. */ + u32 blockSize_p3 = 1; /* Phase #3 : Use 1-byte, the remnant of FW image. */ + u32 blockCount_p1 = 0, blockCount_p2 = 0, blockCount_p3 = 0; + u32 remainSize_p1 = 0, remainSize_p2 = 0; + u8 *bufferPtr = (u8 *)buffer; + u32 i = 0, offset = 0; + + blockSize_p1 = MAX_REG_BOLCK_SIZE; + + /* 3 Phase #1 */ + blockCount_p1 = buffSize / blockSize_p1; + remainSize_p1 = buffSize % blockSize_p1; + + if (blockCount_p1) { + RT_TRACE(_module_hal_init_c_, _drv_notice_, + ("_BlockWrite: [P1] buffSize(%d) blockSize_p1(%d) blockCount_p1(%d) remainSize_p1(%d)\n", + buffSize, blockSize_p1, blockCount_p1, remainSize_p1)); + } + + for (i = 0; i < blockCount_p1; i++) { + ret = rtw_writeN(padapter, (FW_8188E_START_ADDRESS + i * blockSize_p1), blockSize_p1, (bufferPtr + i * blockSize_p1)); + if (ret == _FAIL) + goto exit; + } + + /* 3 Phase #2 */ + if (remainSize_p1) { + offset = blockCount_p1 * blockSize_p1; + + blockCount_p2 = remainSize_p1/blockSize_p2; + remainSize_p2 = remainSize_p1%blockSize_p2; + + if (blockCount_p2) { + RT_TRACE(_module_hal_init_c_, _drv_notice_, + ("_BlockWrite: [P2] buffSize_p2(%d) blockSize_p2(%d) blockCount_p2(%d) remainSize_p2(%d)\n", + (buffSize-offset), blockSize_p2 , blockCount_p2, remainSize_p2)); + } + + for (i = 0; i < blockCount_p2; i++) { + ret = rtw_writeN(padapter, (FW_8188E_START_ADDRESS + offset + i*blockSize_p2), blockSize_p2, (bufferPtr + offset + i*blockSize_p2)); + + if (ret == _FAIL) + goto exit; + } + } + + /* 3 Phase #3 */ + if (remainSize_p2) { + offset = (blockCount_p1 * blockSize_p1) + (blockCount_p2 * blockSize_p2); + + blockCount_p3 = remainSize_p2 / blockSize_p3; + + RT_TRACE(_module_hal_init_c_, _drv_notice_, + ("_BlockWrite: [P3] buffSize_p3(%d) blockSize_p3(%d) blockCount_p3(%d)\n", + (buffSize-offset), blockSize_p3, blockCount_p3)); + + for (i = 0; i < blockCount_p3; i++) { + ret = rtw_write8(padapter, (FW_8188E_START_ADDRESS + offset + i), *(bufferPtr + offset + i)); + + if (ret == _FAIL) + goto exit; + } + } + +exit: + return ret; +} + +static int _PageWrite(struct adapter *padapter, u32 page, void *buffer, u32 size) +{ + u8 value8; + u8 u8Page = (u8)(page & 0x07); + + value8 = (rtw_read8(padapter, REG_MCUFWDL+2) & 0xF8) | u8Page; + rtw_write8(padapter, REG_MCUFWDL+2, value8); + + return _BlockWrite(padapter, buffer, size); +} + +static int _WriteFW(struct adapter *padapter, void *buffer, u32 size) +{ + /* Since we need dynamic decide method of dwonload fw, so we call this function to get chip version. */ + /* We can remove _ReadChipVersion from ReadpadapterInfo8192C later. */ + int ret = _SUCCESS; + u32 pageNums, remainSize; + u32 page, offset; + u8 *bufferPtr = (u8 *)buffer; + + pageNums = size / MAX_PAGE_SIZE; + remainSize = size % MAX_PAGE_SIZE; + + for (page = 0; page < pageNums; page++) { + offset = page * MAX_PAGE_SIZE; + ret = _PageWrite(padapter, page, bufferPtr+offset, MAX_PAGE_SIZE); + + if (ret == _FAIL) + goto exit; + } + if (remainSize) { + offset = pageNums * MAX_PAGE_SIZE; + page = pageNums; + ret = _PageWrite(padapter, page, bufferPtr+offset, remainSize); + + if (ret == _FAIL) + goto exit; + } + RT_TRACE(_module_hal_init_c_, _drv_info_, ("_WriteFW Done- for Normal chip.\n")); +exit: + return ret; +} + +void _8051Reset88E(struct adapter *padapter) +{ + u8 u1bTmp; + + u1bTmp = rtw_read8(padapter, REG_SYS_FUNC_EN+1); + rtw_write8(padapter, REG_SYS_FUNC_EN+1, u1bTmp&(~BIT2)); + rtw_write8(padapter, REG_SYS_FUNC_EN+1, u1bTmp|(BIT2)); + DBG_88E("=====> _8051Reset88E(): 8051 reset success .\n"); +} + +static s32 _FWFreeToGo(struct adapter *padapter) +{ + u32 counter = 0; + u32 value32; + + /* polling CheckSum report */ + do { + value32 = rtw_read32(padapter, REG_MCUFWDL); + if (value32 & FWDL_ChkSum_rpt) + break; + } while (counter++ < POLLING_READY_TIMEOUT_COUNT); + + if (counter >= POLLING_READY_TIMEOUT_COUNT) { + DBG_88E("%s: chksum report fail! REG_MCUFWDL:0x%08x\n", __func__, value32); + return _FAIL; + } + DBG_88E("%s: Checksum report OK! REG_MCUFWDL:0x%08x\n", __func__, value32); + + value32 = rtw_read32(padapter, REG_MCUFWDL); + value32 |= MCUFWDL_RDY; + value32 &= ~WINTINI_RDY; + rtw_write32(padapter, REG_MCUFWDL, value32); + + _8051Reset88E(padapter); + + /* polling for FW ready */ + counter = 0; + do { + value32 = rtw_read32(padapter, REG_MCUFWDL); + if (value32 & WINTINI_RDY) { + DBG_88E("%s: Polling FW ready success!! REG_MCUFWDL:0x%08x\n", __func__, value32); + return _SUCCESS; + } + rtw_udelay_os(5); + } while (counter++ < POLLING_READY_TIMEOUT_COUNT); + + DBG_88E("%s: Polling FW ready fail!! REG_MCUFWDL:0x%08x\n", __func__, value32); + return _FAIL; +} + +#define IS_FW_81xxC(padapter) (((GET_HAL_DATA(padapter))->FirmwareSignature & 0xFFF0) == 0x88C0) + +s32 rtl8188e_FirmwareDownload(struct adapter *padapter) +{ + s32 rtStatus = _SUCCESS; + u8 writeFW_retry = 0; + u32 fwdl_start_time; + struct hal_data_8188e *pHalData = GET_HAL_DATA(padapter); + + u8 *FwImage; + u32 FwImageLen; + struct rt_firmware *pFirmware = NULL; + struct rt_firmware_hdr *pFwHdr = NULL; + u8 *pFirmwareBuf; + u32 FirmwareLen; + + RT_TRACE(_module_hal_init_c_, _drv_info_, ("+%s\n", __func__)); + pFirmware = (struct rt_firmware *)rtw_zmalloc(sizeof(struct rt_firmware)); + if (!pFirmware) { + rtStatus = _FAIL; + goto Exit; + } + + FwImage = (u8 *)Rtl8188E_FwImageArray; + FwImageLen = Rtl8188E_FWImgArrayLength; + + pFirmware->eFWSource = FW_SOURCE_HEADER_FILE; + + switch (pFirmware->eFWSource) { + case FW_SOURCE_IMG_FILE: + break; + case FW_SOURCE_HEADER_FILE: + if (FwImageLen > FW_8188E_SIZE) { + rtStatus = _FAIL; + RT_TRACE(_module_hal_init_c_, _drv_err_, ("Firmware size exceed 0x%X. Check it.\n", FW_8188E_SIZE)); + goto Exit; + } + + pFirmware->szFwBuffer = FwImage; + pFirmware->ulFwLength = FwImageLen; + break; + } + pFirmwareBuf = pFirmware->szFwBuffer; + FirmwareLen = pFirmware->ulFwLength; + DBG_88E_LEVEL(_drv_info_, "+%s: !bUsedWoWLANFw, FmrmwareLen:%d+\n", __func__, FirmwareLen); + + /* To Check Fw header. Added by tynli. 2009.12.04. */ + pFwHdr = (struct rt_firmware_hdr *)pFirmware->szFwBuffer; + + pHalData->FirmwareVersion = le16_to_cpu(pFwHdr->Version); + pHalData->FirmwareSubVersion = pFwHdr->Subversion; + pHalData->FirmwareSignature = le16_to_cpu(pFwHdr->Signature); + + DBG_88E("%s: fw_ver =%d fw_subver =%d sig = 0x%x\n", + __func__, pHalData->FirmwareVersion, pHalData->FirmwareSubVersion, pHalData->FirmwareSignature); + + if (IS_FW_HEADER_EXIST(pFwHdr)) { + /* Shift 32 bytes for FW header */ + pFirmwareBuf = pFirmwareBuf + 32; + FirmwareLen = FirmwareLen - 32; + } + + /* Suggested by Filen. If 8051 is running in RAM code, driver should inform Fw to reset by itself, */ + /* or it will cause download Fw fail. 2010.02.01. by tynli. */ + if (rtw_read8(padapter, REG_MCUFWDL) & RAM_DL_SEL) { /* 8051 RAM code */ + rtw_write8(padapter, REG_MCUFWDL, 0x00); + _8051Reset88E(padapter); + } + + _FWDownloadEnable(padapter, true); + fwdl_start_time = rtw_get_current_time(); + while (1) { + /* reset the FWDL chksum */ + rtw_write8(padapter, REG_MCUFWDL, rtw_read8(padapter, REG_MCUFWDL) | FWDL_ChkSum_rpt); + + rtStatus = _WriteFW(padapter, pFirmwareBuf, FirmwareLen); + + if (rtStatus == _SUCCESS || + (rtw_get_passing_time_ms(fwdl_start_time) > 500 && writeFW_retry++ >= 3)) + break; + + DBG_88E("%s writeFW_retry:%u, time after fwdl_start_time:%ums\n", + __func__, writeFW_retry, rtw_get_passing_time_ms(fwdl_start_time) + ); + } + _FWDownloadEnable(padapter, false); + if (_SUCCESS != rtStatus) { + DBG_88E("DL Firmware failed!\n"); + goto Exit; + } + + rtStatus = _FWFreeToGo(padapter); + if (_SUCCESS != rtStatus) { + DBG_88E("DL Firmware failed!\n"); + goto Exit; + } + RT_TRACE(_module_hal_init_c_, _drv_info_, ("Firmware is ready to run!\n")); + +Exit: + + kfree(pFirmware); + return rtStatus; +} + +void rtl8188e_InitializeFirmwareVars(struct adapter *padapter) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(padapter); + + /* Init Fw LPS related. */ + padapter->pwrctrlpriv.bFwCurrentInPSMode = false; + + /* Init H2C counter. by tynli. 2009.12.09. */ + pHalData->LastHMEBoxNum = 0; +} + +static void rtl8188e_free_hal_data(struct adapter *padapter) +{ +_func_enter_; + kfree(padapter->HalData); + padapter->HalData = NULL; +_func_exit_; +} + +/* */ +/* Efuse related code */ +/* */ +enum{ + VOLTAGE_V25 = 0x03, + LDOE25_SHIFT = 28 , + }; + +static bool +hal_EfusePgPacketWrite2ByteHeader( + struct adapter *pAdapter, + u8 efuseType, + u16 *pAddr, + struct pgpkt *pTargetPkt, + bool bPseudoTest); +static bool +hal_EfusePgPacketWrite1ByteHeader( + struct adapter *pAdapter, + u8 efuseType, + u16 *pAddr, + struct pgpkt *pTargetPkt, + bool bPseudoTest); +static bool +hal_EfusePgPacketWriteData( + struct adapter *pAdapter, + u8 efuseType, + u16 *pAddr, + struct pgpkt *pTargetPkt, + bool bPseudoTest); + +static void +hal_EfusePowerSwitch_RTL8188E( + struct adapter *pAdapter, + u8 bWrite, + u8 PwrState) +{ + u8 tempval; + u16 tmpV16; + + if (PwrState) { + rtw_write8(pAdapter, REG_EFUSE_ACCESS, EFUSE_ACCESS_ON); + + /* 1.2V Power: From VDDON with Power Cut(0x0000h[15]), defualt valid */ + tmpV16 = rtw_read16(pAdapter, REG_SYS_ISO_CTRL); + if (!(tmpV16 & PWC_EV12V)) { + tmpV16 |= PWC_EV12V; + rtw_write16(pAdapter, REG_SYS_ISO_CTRL, tmpV16); + } + /* Reset: 0x0000h[28], default valid */ + tmpV16 = rtw_read16(pAdapter, REG_SYS_FUNC_EN); + if (!(tmpV16 & FEN_ELDR)) { + tmpV16 |= FEN_ELDR; + rtw_write16(pAdapter, REG_SYS_FUNC_EN, tmpV16); + } + + /* Clock: Gated(0x0008h[5]) 8M(0x0008h[1]) clock from ANA, default valid */ + tmpV16 = rtw_read16(pAdapter, REG_SYS_CLKR); + if ((!(tmpV16 & LOADER_CLK_EN)) || (!(tmpV16 & ANA8M))) { + tmpV16 |= (LOADER_CLK_EN | ANA8M); + rtw_write16(pAdapter, REG_SYS_CLKR, tmpV16); + } + + if (bWrite) { + /* Enable LDO 2.5V before read/write action */ + tempval = rtw_read8(pAdapter, EFUSE_TEST+3); + tempval &= 0x0F; + tempval |= (VOLTAGE_V25 << 4); + rtw_write8(pAdapter, EFUSE_TEST+3, (tempval | 0x80)); + } + } else { + rtw_write8(pAdapter, REG_EFUSE_ACCESS, EFUSE_ACCESS_OFF); + + if (bWrite) { + /* Disable LDO 2.5V after read/write action */ + tempval = rtw_read8(pAdapter, EFUSE_TEST+3); + rtw_write8(pAdapter, EFUSE_TEST+3, (tempval & 0x7F)); + } + } +} + +static void +rtl8188e_EfusePowerSwitch( + struct adapter *pAdapter, + u8 bWrite, + u8 PwrState) +{ + hal_EfusePowerSwitch_RTL8188E(pAdapter, bWrite, PwrState); +} + + +static void Hal_EfuseReadEFuse88E(struct adapter *Adapter, + u16 _offset, + u16 _size_byte, + u8 *pbuf, + bool bPseudoTest + ) +{ + u8 *efuseTbl = NULL; + u8 rtemp8[1]; + u16 eFuse_Addr = 0; + u8 offset, wren; + u16 i, j; + u16 **eFuseWord = NULL; + u16 efuse_utilized = 0; + u8 u1temp = 0; + + /* */ + /* Do NOT excess total size of EFuse table. Added by Roger, 2008.11.10. */ + /* */ + if ((_offset + _size_byte) > EFUSE_MAP_LEN_88E) {/* total E-Fuse table is 512bytes */ + DBG_88E("Hal_EfuseReadEFuse88E(): Invalid offset(%#x) with read bytes(%#x)!!\n", _offset, _size_byte); + goto exit; + } + + efuseTbl = (u8 *)rtw_zmalloc(EFUSE_MAP_LEN_88E); + if (efuseTbl == NULL) { + DBG_88E("%s: alloc efuseTbl fail!\n", __func__); + goto exit; + } + + eFuseWord = (u16 **)rtw_malloc2d(EFUSE_MAX_SECTION_88E, EFUSE_MAX_WORD_UNIT, sizeof(u16)); + if (eFuseWord == NULL) { + DBG_88E("%s: alloc eFuseWord fail!\n", __func__); + goto exit; + } + + /* 0. Refresh efuse init map as all oxFF. */ + for (i = 0; i < EFUSE_MAX_SECTION_88E; i++) + for (j = 0; j < EFUSE_MAX_WORD_UNIT; j++) + eFuseWord[i][j] = 0xFFFF; + + /* */ + /* 1. Read the first byte to check if efuse is empty!!! */ + /* */ + /* */ + ReadEFuseByte(Adapter, eFuse_Addr, rtemp8, bPseudoTest); + if (*rtemp8 != 0xFF) { + efuse_utilized++; + eFuse_Addr++; + } else { + DBG_88E("EFUSE is empty efuse_Addr-%d efuse_data =%x\n", eFuse_Addr, *rtemp8); + goto exit; + } + + /* */ + /* 2. Read real efuse content. Filter PG header and every section data. */ + /* */ + while ((*rtemp8 != 0xFF) && (eFuse_Addr < EFUSE_REAL_CONTENT_LEN_88E)) { + /* Check PG header for section num. */ + if ((*rtemp8 & 0x1F) == 0x0F) { /* extended header */ + u1temp = ((*rtemp8 & 0xE0) >> 5); + + ReadEFuseByte(Adapter, eFuse_Addr, rtemp8, bPseudoTest); + + if ((*rtemp8 & 0x0F) == 0x0F) { + eFuse_Addr++; + ReadEFuseByte(Adapter, eFuse_Addr, rtemp8, bPseudoTest); + + if (*rtemp8 != 0xFF && (eFuse_Addr < EFUSE_REAL_CONTENT_LEN_88E)) + eFuse_Addr++; + continue; + } else { + offset = ((*rtemp8 & 0xF0) >> 1) | u1temp; + wren = (*rtemp8 & 0x0F); + eFuse_Addr++; + } + } else { + offset = ((*rtemp8 >> 4) & 0x0f); + wren = (*rtemp8 & 0x0f); + } + + if (offset < EFUSE_MAX_SECTION_88E) { + /* Get word enable value from PG header */ + + for (i = 0; i < EFUSE_MAX_WORD_UNIT; i++) { + /* Check word enable condition in the section */ + if (!(wren & 0x01)) { + ReadEFuseByte(Adapter, eFuse_Addr, rtemp8, bPseudoTest); + eFuse_Addr++; + efuse_utilized++; + eFuseWord[offset][i] = (*rtemp8 & 0xff); + if (eFuse_Addr >= EFUSE_REAL_CONTENT_LEN_88E) + break; + ReadEFuseByte(Adapter, eFuse_Addr, rtemp8, bPseudoTest); + eFuse_Addr++; + efuse_utilized++; + eFuseWord[offset][i] |= (((u16)*rtemp8 << 8) & 0xff00); + if (eFuse_Addr >= EFUSE_REAL_CONTENT_LEN_88E) + break; + } + wren >>= 1; + } + } + + /* Read next PG header */ + ReadEFuseByte(Adapter, eFuse_Addr, rtemp8, bPseudoTest); + + if (*rtemp8 != 0xFF && (eFuse_Addr < EFUSE_REAL_CONTENT_LEN_88E)) { + efuse_utilized++; + eFuse_Addr++; + } + } + + /* 3. Collect 16 sections and 4 word unit into Efuse map. */ + for (i = 0; i < EFUSE_MAX_SECTION_88E; i++) { + for (j = 0; j < EFUSE_MAX_WORD_UNIT; j++) { + efuseTbl[(i*8)+(j*2)] = (eFuseWord[i][j] & 0xff); + efuseTbl[(i*8)+((j*2)+1)] = ((eFuseWord[i][j] >> 8) & 0xff); + } + } + + /* 4. Copy from Efuse map to output pointer memory!!! */ + for (i = 0; i < _size_byte; i++) + pbuf[i] = efuseTbl[_offset+i]; + + /* 5. Calculate Efuse utilization. */ + rtw_hal_set_hwreg(Adapter, HW_VAR_EFUSE_BYTES, (u8 *)&eFuse_Addr); + +exit: + kfree(efuseTbl); + + if (eFuseWord) + rtw_mfree2d((void *)eFuseWord, EFUSE_MAX_SECTION_88E, EFUSE_MAX_WORD_UNIT, sizeof(u16)); +} + +static void ReadEFuseByIC(struct adapter *Adapter, u8 efuseType, u16 _offset, u16 _size_byte, u8 *pbuf, bool bPseudoTest) +{ + if (!bPseudoTest) { + int ret = _FAIL; + if (rtw_IOL_applied(Adapter)) { + rtw_hal_power_on(Adapter); + + iol_mode_enable(Adapter, 1); + ret = iol_read_efuse(Adapter, 0, _offset, _size_byte, pbuf); + iol_mode_enable(Adapter, 0); + + if (_SUCCESS == ret) + goto exit; + } + } + Hal_EfuseReadEFuse88E(Adapter, _offset, _size_byte, pbuf, bPseudoTest); + +exit: + return; +} + +static void ReadEFuse_Pseudo(struct adapter *Adapter, u8 efuseType, u16 _offset, u16 _size_byte, u8 *pbuf, bool bPseudoTest) +{ + Hal_EfuseReadEFuse88E(Adapter, _offset, _size_byte, pbuf, bPseudoTest); +} + +static void rtl8188e_ReadEFuse(struct adapter *Adapter, u8 efuseType, + u16 _offset, u16 _size_byte, u8 *pbuf, + bool bPseudoTest) +{ + if (bPseudoTest) + ReadEFuse_Pseudo (Adapter, efuseType, _offset, _size_byte, pbuf, bPseudoTest); + else + ReadEFuseByIC(Adapter, efuseType, _offset, _size_byte, pbuf, bPseudoTest); +} + +/* Do not support BT */ +static void Hal_EFUSEGetEfuseDefinition88E(struct adapter *pAdapter, u8 efuseType, u8 type, void *pOut) +{ + switch (type) { + case TYPE_EFUSE_MAX_SECTION: + { + u8 *pMax_section; + pMax_section = (u8 *)pOut; + *pMax_section = EFUSE_MAX_SECTION_88E; + } + break; + case TYPE_EFUSE_REAL_CONTENT_LEN: + { + u16 *pu2Tmp; + pu2Tmp = (u16 *)pOut; + *pu2Tmp = EFUSE_REAL_CONTENT_LEN_88E; + } + break; + case TYPE_EFUSE_CONTENT_LEN_BANK: + { + u16 *pu2Tmp; + pu2Tmp = (u16 *)pOut; + *pu2Tmp = EFUSE_REAL_CONTENT_LEN_88E; + } + break; + case TYPE_AVAILABLE_EFUSE_BYTES_BANK: + { + u16 *pu2Tmp; + pu2Tmp = (u16 *)pOut; + *pu2Tmp = (u16)(EFUSE_REAL_CONTENT_LEN_88E-EFUSE_OOB_PROTECT_BYTES_88E); + } + break; + case TYPE_AVAILABLE_EFUSE_BYTES_TOTAL: + { + u16 *pu2Tmp; + pu2Tmp = (u16 *)pOut; + *pu2Tmp = (u16)(EFUSE_REAL_CONTENT_LEN_88E-EFUSE_OOB_PROTECT_BYTES_88E); + } + break; + case TYPE_EFUSE_MAP_LEN: + { + u16 *pu2Tmp; + pu2Tmp = (u16 *)pOut; + *pu2Tmp = (u16)EFUSE_MAP_LEN_88E; + } + break; + case TYPE_EFUSE_PROTECT_BYTES_BANK: + { + u8 *pu1Tmp; + pu1Tmp = (u8 *)pOut; + *pu1Tmp = (u8)(EFUSE_OOB_PROTECT_BYTES_88E); + } + break; + default: + { + u8 *pu1Tmp; + pu1Tmp = (u8 *)pOut; + *pu1Tmp = 0; + } + break; + } +} + +static void Hal_EFUSEGetEfuseDefinition_Pseudo88E(struct adapter *pAdapter, u8 efuseType, u8 type, void *pOut) +{ + switch (type) { + case TYPE_EFUSE_MAX_SECTION: + { + u8 *pMax_section; + pMax_section = (u8 *)pOut; + *pMax_section = EFUSE_MAX_SECTION_88E; + } + break; + case TYPE_EFUSE_REAL_CONTENT_LEN: + { + u16 *pu2Tmp; + pu2Tmp = (u16 *)pOut; + *pu2Tmp = EFUSE_REAL_CONTENT_LEN_88E; + } + break; + case TYPE_EFUSE_CONTENT_LEN_BANK: + { + u16 *pu2Tmp; + pu2Tmp = (u16 *)pOut; + *pu2Tmp = EFUSE_REAL_CONTENT_LEN_88E; + } + break; + case TYPE_AVAILABLE_EFUSE_BYTES_BANK: + { + u16 *pu2Tmp; + pu2Tmp = (u16 *)pOut; + *pu2Tmp = (u16)(EFUSE_REAL_CONTENT_LEN_88E-EFUSE_OOB_PROTECT_BYTES_88E); + } + break; + case TYPE_AVAILABLE_EFUSE_BYTES_TOTAL: + { + u16 *pu2Tmp; + pu2Tmp = (u16 *)pOut; + *pu2Tmp = (u16)(EFUSE_REAL_CONTENT_LEN_88E-EFUSE_OOB_PROTECT_BYTES_88E); + } + break; + case TYPE_EFUSE_MAP_LEN: + { + u16 *pu2Tmp; + pu2Tmp = (u16 *)pOut; + *pu2Tmp = (u16)EFUSE_MAP_LEN_88E; + } + break; + case TYPE_EFUSE_PROTECT_BYTES_BANK: + { + u8 *pu1Tmp; + pu1Tmp = (u8 *)pOut; + *pu1Tmp = (u8)(EFUSE_OOB_PROTECT_BYTES_88E); + } + break; + default: + { + u8 *pu1Tmp; + pu1Tmp = (u8 *)pOut; + *pu1Tmp = 0; + } + break; + } +} + +static void rtl8188e_EFUSE_GetEfuseDefinition(struct adapter *pAdapter, u8 efuseType, u8 type, void *pOut, bool bPseudoTest) +{ + if (bPseudoTest) + Hal_EFUSEGetEfuseDefinition_Pseudo88E(pAdapter, efuseType, type, pOut); + else + Hal_EFUSEGetEfuseDefinition88E(pAdapter, efuseType, type, pOut); +} + +static u8 Hal_EfuseWordEnableDataWrite(struct adapter *pAdapter, u16 efuse_addr, u8 word_en, u8 *data, bool bPseudoTest) +{ + u16 tmpaddr = 0; + u16 start_addr = efuse_addr; + u8 badworden = 0x0F; + u8 tmpdata[8]; + + _rtw_memset((void *)tmpdata, 0xff, PGPKT_DATA_SIZE); + + if (!(word_en&BIT0)) { + tmpaddr = start_addr; + efuse_OneByteWrite(pAdapter, start_addr++, data[0], bPseudoTest); + efuse_OneByteWrite(pAdapter, start_addr++, data[1], bPseudoTest); + + efuse_OneByteRead(pAdapter, tmpaddr, &tmpdata[0], bPseudoTest); + efuse_OneByteRead(pAdapter, tmpaddr+1, &tmpdata[1], bPseudoTest); + if ((data[0] != tmpdata[0]) || (data[1] != tmpdata[1])) + badworden &= (~BIT0); + } + if (!(word_en&BIT1)) { + tmpaddr = start_addr; + efuse_OneByteWrite(pAdapter, start_addr++, data[2], bPseudoTest); + efuse_OneByteWrite(pAdapter, start_addr++, data[3], bPseudoTest); + + efuse_OneByteRead(pAdapter, tmpaddr , &tmpdata[2], bPseudoTest); + efuse_OneByteRead(pAdapter, tmpaddr+1, &tmpdata[3], bPseudoTest); + if ((data[2] != tmpdata[2]) || (data[3] != tmpdata[3])) + badworden &= (~BIT1); + } + if (!(word_en&BIT2)) { + tmpaddr = start_addr; + efuse_OneByteWrite(pAdapter, start_addr++, data[4], bPseudoTest); + efuse_OneByteWrite(pAdapter, start_addr++, data[5], bPseudoTest); + + efuse_OneByteRead(pAdapter, tmpaddr, &tmpdata[4], bPseudoTest); + efuse_OneByteRead(pAdapter, tmpaddr+1, &tmpdata[5], bPseudoTest); + if ((data[4] != tmpdata[4]) || (data[5] != tmpdata[5])) + badworden &= (~BIT2); + } + if (!(word_en&BIT3)) { + tmpaddr = start_addr; + efuse_OneByteWrite(pAdapter, start_addr++, data[6], bPseudoTest); + efuse_OneByteWrite(pAdapter, start_addr++, data[7], bPseudoTest); + + efuse_OneByteRead(pAdapter, tmpaddr, &tmpdata[6], bPseudoTest); + efuse_OneByteRead(pAdapter, tmpaddr+1, &tmpdata[7], bPseudoTest); + if ((data[6] != tmpdata[6]) || (data[7] != tmpdata[7])) + badworden &= (~BIT3); + } + return badworden; +} + +static u8 Hal_EfuseWordEnableDataWrite_Pseudo(struct adapter *pAdapter, u16 efuse_addr, u8 word_en, u8 *data, bool bPseudoTest) +{ + u8 ret; + + ret = Hal_EfuseWordEnableDataWrite(pAdapter, efuse_addr, word_en, data, bPseudoTest); + return ret; +} + +static u8 rtl8188e_Efuse_WordEnableDataWrite(struct adapter *pAdapter, u16 efuse_addr, u8 word_en, u8 *data, bool bPseudoTest) +{ + u8 ret = 0; + + if (bPseudoTest) + ret = Hal_EfuseWordEnableDataWrite_Pseudo (pAdapter, efuse_addr, word_en, data, bPseudoTest); + else + ret = Hal_EfuseWordEnableDataWrite(pAdapter, efuse_addr, word_en, data, bPseudoTest); + return ret; +} + +static u16 hal_EfuseGetCurrentSize_8188e(struct adapter *pAdapter, bool bPseudoTest) +{ + int bContinual = true; + u16 efuse_addr = 0; + u8 hoffset = 0, hworden = 0; + u8 efuse_data, word_cnts = 0; + + if (bPseudoTest) + efuse_addr = (u16)(fakeEfuseUsedBytes); + else + rtw_hal_get_hwreg(pAdapter, HW_VAR_EFUSE_BYTES, (u8 *)&efuse_addr); + + while (bContinual && + efuse_OneByteRead(pAdapter, efuse_addr, &efuse_data, bPseudoTest) && + AVAILABLE_EFUSE_ADDR(efuse_addr)) { + if (efuse_data != 0xFF) { + if ((efuse_data&0x1F) == 0x0F) { /* extended header */ + hoffset = efuse_data; + efuse_addr++; + efuse_OneByteRead(pAdapter, efuse_addr, &efuse_data, bPseudoTest); + if ((efuse_data & 0x0F) == 0x0F) { + efuse_addr++; + continue; + } else { + hoffset = ((hoffset & 0xE0) >> 5) | ((efuse_data & 0xF0) >> 1); + hworden = efuse_data & 0x0F; + } + } else { + hoffset = (efuse_data>>4) & 0x0F; + hworden = efuse_data & 0x0F; + } + word_cnts = Efuse_CalculateWordCnts(hworden); + /* read next header */ + efuse_addr = efuse_addr + (word_cnts*2)+1; + } else { + bContinual = false; + } + } + + if (bPseudoTest) + fakeEfuseUsedBytes = efuse_addr; + else + rtw_hal_set_hwreg(pAdapter, HW_VAR_EFUSE_BYTES, (u8 *)&efuse_addr); + + return efuse_addr; +} + +static u16 Hal_EfuseGetCurrentSize_Pseudo(struct adapter *pAdapter, bool bPseudoTest) +{ + u16 ret = 0; + + ret = hal_EfuseGetCurrentSize_8188e(pAdapter, bPseudoTest); + return ret; +} + +static u16 rtl8188e_EfuseGetCurrentSize(struct adapter *pAdapter, u8 efuseType, bool bPseudoTest) +{ + u16 ret = 0; + + if (bPseudoTest) + ret = Hal_EfuseGetCurrentSize_Pseudo(pAdapter, bPseudoTest); + else + ret = hal_EfuseGetCurrentSize_8188e(pAdapter, bPseudoTest); + return ret; +} + +static int hal_EfusePgPacketRead_8188e(struct adapter *pAdapter, u8 offset, u8 *data, bool bPseudoTest) +{ + u8 ReadState = PG_STATE_HEADER; + int bContinual = true; + int bDataEmpty = true; + u8 efuse_data, word_cnts = 0; + u16 efuse_addr = 0; + u8 hoffset = 0, hworden = 0; + u8 tmpidx = 0; + u8 tmpdata[8]; + u8 max_section = 0; + u8 tmp_header = 0; + + EFUSE_GetEfuseDefinition(pAdapter, EFUSE_WIFI, TYPE_EFUSE_MAX_SECTION, (void *)&max_section, bPseudoTest); + + if (data == NULL) + return false; + if (offset > max_section) + return false; + + _rtw_memset((void *)data, 0xff, sizeof(u8)*PGPKT_DATA_SIZE); + _rtw_memset((void *)tmpdata, 0xff, sizeof(u8)*PGPKT_DATA_SIZE); + + /* Efuse has been pre-programmed dummy 5Bytes at the end of Efuse by CP. */ + /* Skip dummy parts to prevent unexpected data read from Efuse. */ + /* By pass right now. 2009.02.19. */ + while (bContinual && AVAILABLE_EFUSE_ADDR(efuse_addr)) { + /* Header Read ------------- */ + if (ReadState & PG_STATE_HEADER) { + if (efuse_OneByteRead(pAdapter, efuse_addr, &efuse_data, bPseudoTest) && (efuse_data != 0xFF)) { + if (EXT_HEADER(efuse_data)) { + tmp_header = efuse_data; + efuse_addr++; + efuse_OneByteRead(pAdapter, efuse_addr, &efuse_data, bPseudoTest); + if (!ALL_WORDS_DISABLED(efuse_data)) { + hoffset = ((tmp_header & 0xE0) >> 5) | ((efuse_data & 0xF0) >> 1); + hworden = efuse_data & 0x0F; + } else { + DBG_88E("Error, All words disabled\n"); + efuse_addr++; + continue; + } + } else { + hoffset = (efuse_data>>4) & 0x0F; + hworden = efuse_data & 0x0F; + } + word_cnts = Efuse_CalculateWordCnts(hworden); + bDataEmpty = true; + + if (hoffset == offset) { + for (tmpidx = 0; tmpidx < word_cnts*2; tmpidx++) { + if (efuse_OneByteRead(pAdapter, efuse_addr+1+tmpidx, &efuse_data, bPseudoTest)) { + tmpdata[tmpidx] = efuse_data; + if (efuse_data != 0xff) + bDataEmpty = false; + } + } + if (bDataEmpty == false) { + ReadState = PG_STATE_DATA; + } else {/* read next header */ + efuse_addr = efuse_addr + (word_cnts*2)+1; + ReadState = PG_STATE_HEADER; + } + } else {/* read next header */ + efuse_addr = efuse_addr + (word_cnts*2)+1; + ReadState = PG_STATE_HEADER; + } + } else { + bContinual = false; + } + } else if (ReadState & PG_STATE_DATA) { + /* Data section Read ------------- */ + efuse_WordEnableDataRead(hworden, tmpdata, data); + efuse_addr = efuse_addr + (word_cnts*2)+1; + ReadState = PG_STATE_HEADER; + } + + } + + if ((data[0] == 0xff) && (data[1] == 0xff) && (data[2] == 0xff) && (data[3] == 0xff) && + (data[4] == 0xff) && (data[5] == 0xff) && (data[6] == 0xff) && (data[7] == 0xff)) + return false; + else + return true; +} + +static int Hal_EfusePgPacketRead(struct adapter *pAdapter, u8 offset, u8 *data, bool bPseudoTest) +{ + int ret; + + ret = hal_EfusePgPacketRead_8188e(pAdapter, offset, data, bPseudoTest); + return ret; +} + +static int Hal_EfusePgPacketRead_Pseudo(struct adapter *pAdapter, u8 offset, u8 *data, bool bPseudoTest) +{ + int ret; + + ret = hal_EfusePgPacketRead_8188e(pAdapter, offset, data, bPseudoTest); + return ret; +} + +static int rtl8188e_Efuse_PgPacketRead(struct adapter *pAdapter, u8 offset, u8 *data, bool bPseudoTest) +{ + int ret; + + if (bPseudoTest) + ret = Hal_EfusePgPacketRead_Pseudo (pAdapter, offset, data, bPseudoTest); + else + ret = Hal_EfusePgPacketRead(pAdapter, offset, data, bPseudoTest); + return ret; +} + +static bool hal_EfuseFixHeaderProcess(struct adapter *pAdapter, u8 efuseType, struct pgpkt *pFixPkt, u16 *pAddr, bool bPseudoTest) +{ + u8 originaldata[8], badworden = 0; + u16 efuse_addr = *pAddr; + u32 PgWriteSuccess = 0; + + _rtw_memset((void *)originaldata, 0xff, 8); + + if (Efuse_PgPacketRead(pAdapter, pFixPkt->offset, originaldata, bPseudoTest)) { + /* check if data exist */ + badworden = Efuse_WordEnableDataWrite(pAdapter, efuse_addr+1, pFixPkt->word_en, originaldata, bPseudoTest); + + if (badworden != 0xf) { /* write fail */ + PgWriteSuccess = Efuse_PgPacketWrite(pAdapter, pFixPkt->offset, badworden, originaldata, bPseudoTest); + + if (!PgWriteSuccess) + return false; + else + efuse_addr = Efuse_GetCurrentSize(pAdapter, efuseType, bPseudoTest); + } else { + efuse_addr = efuse_addr + (pFixPkt->word_cnts*2) + 1; + } + } else { + efuse_addr = efuse_addr + (pFixPkt->word_cnts*2) + 1; + } + *pAddr = efuse_addr; + return true; +} + +static bool hal_EfusePgPacketWrite2ByteHeader(struct adapter *pAdapter, u8 efuseType, u16 *pAddr, struct pgpkt *pTargetPkt, bool bPseudoTest) +{ + bool bRet = false; + u16 efuse_addr = *pAddr, efuse_max_available_len = 0; + u8 pg_header = 0, tmp_header = 0, pg_header_temp = 0; + u8 repeatcnt = 0; + + EFUSE_GetEfuseDefinition(pAdapter, efuseType, TYPE_AVAILABLE_EFUSE_BYTES_BANK, (void *)&efuse_max_available_len, bPseudoTest); + + while (efuse_addr < efuse_max_available_len) { + pg_header = ((pTargetPkt->offset & 0x07) << 5) | 0x0F; + efuse_OneByteWrite(pAdapter, efuse_addr, pg_header, bPseudoTest); + efuse_OneByteRead(pAdapter, efuse_addr, &tmp_header, bPseudoTest); + + while (tmp_header == 0xFF) { + if (repeatcnt++ > EFUSE_REPEAT_THRESHOLD_) + return false; + + efuse_OneByteWrite(pAdapter, efuse_addr, pg_header, bPseudoTest); + efuse_OneByteRead(pAdapter, efuse_addr, &tmp_header, bPseudoTest); + } + + /* to write ext_header */ + if (tmp_header == pg_header) { + efuse_addr++; + pg_header_temp = pg_header; + pg_header = ((pTargetPkt->offset & 0x78) << 1) | pTargetPkt->word_en; + + efuse_OneByteWrite(pAdapter, efuse_addr, pg_header, bPseudoTest); + efuse_OneByteRead(pAdapter, efuse_addr, &tmp_header, bPseudoTest); + + while (tmp_header == 0xFF) { + if (repeatcnt++ > EFUSE_REPEAT_THRESHOLD_) + return false; + + efuse_OneByteWrite(pAdapter, efuse_addr, pg_header, bPseudoTest); + efuse_OneByteRead(pAdapter, efuse_addr, &tmp_header, bPseudoTest); + } + + if ((tmp_header & 0x0F) == 0x0F) { /* word_en PG fail */ + if (repeatcnt++ > EFUSE_REPEAT_THRESHOLD_) { + return false; + } else { + efuse_addr++; + continue; + } + } else if (pg_header != tmp_header) { /* offset PG fail */ + struct pgpkt fixPkt; + fixPkt.offset = ((pg_header_temp & 0xE0) >> 5) | ((tmp_header & 0xF0) >> 1); + fixPkt.word_en = tmp_header & 0x0F; + fixPkt.word_cnts = Efuse_CalculateWordCnts(fixPkt.word_en); + if (!hal_EfuseFixHeaderProcess(pAdapter, efuseType, &fixPkt, &efuse_addr, bPseudoTest)) + return false; + } else { + bRet = true; + break; + } + } else if ((tmp_header & 0x1F) == 0x0F) { /* wrong extended header */ + efuse_addr += 2; + continue; + } + } + + *pAddr = efuse_addr; + return bRet; +} + +static bool hal_EfusePgPacketWrite1ByteHeader(struct adapter *pAdapter, u8 efuseType, u16 *pAddr, struct pgpkt *pTargetPkt, bool bPseudoTest) +{ + bool bRet = false; + u8 pg_header = 0, tmp_header = 0; + u16 efuse_addr = *pAddr; + u8 repeatcnt = 0; + + pg_header = ((pTargetPkt->offset << 4) & 0xf0) | pTargetPkt->word_en; + + efuse_OneByteWrite(pAdapter, efuse_addr, pg_header, bPseudoTest); + efuse_OneByteRead(pAdapter, efuse_addr, &tmp_header, bPseudoTest); + + while (tmp_header == 0xFF) { + if (repeatcnt++ > EFUSE_REPEAT_THRESHOLD_) + return false; + efuse_OneByteWrite(pAdapter, efuse_addr, pg_header, bPseudoTest); + efuse_OneByteRead(pAdapter, efuse_addr, &tmp_header, bPseudoTest); + } + + if (pg_header == tmp_header) { + bRet = true; + } else { + struct pgpkt fixPkt; + fixPkt.offset = (tmp_header>>4) & 0x0F; + fixPkt.word_en = tmp_header & 0x0F; + fixPkt.word_cnts = Efuse_CalculateWordCnts(fixPkt.word_en); + if (!hal_EfuseFixHeaderProcess(pAdapter, efuseType, &fixPkt, &efuse_addr, bPseudoTest)) + return false; + } + + *pAddr = efuse_addr; + return bRet; +} + +static bool hal_EfusePgPacketWriteData(struct adapter *pAdapter, u8 efuseType, u16 *pAddr, struct pgpkt *pTargetPkt, bool bPseudoTest) +{ + bool bRet = false; + u16 efuse_addr = *pAddr; + u8 badworden = 0; + u32 PgWriteSuccess = 0; + + badworden = 0x0f; + badworden = Efuse_WordEnableDataWrite(pAdapter, efuse_addr+1, pTargetPkt->word_en, pTargetPkt->data, bPseudoTest); + if (badworden == 0x0F) { + /* write ok */ + return true; + } else { + /* reorganize other pg packet */ + PgWriteSuccess = Efuse_PgPacketWrite(pAdapter, pTargetPkt->offset, badworden, pTargetPkt->data, bPseudoTest); + if (!PgWriteSuccess) + return false; + else + return true; + } + return bRet; +} + +static bool +hal_EfusePgPacketWriteHeader( + struct adapter *pAdapter, + u8 efuseType, + u16 *pAddr, + struct pgpkt *pTargetPkt, + bool bPseudoTest) +{ + bool bRet = false; + + if (pTargetPkt->offset >= EFUSE_MAX_SECTION_BASE) + bRet = hal_EfusePgPacketWrite2ByteHeader(pAdapter, efuseType, pAddr, pTargetPkt, bPseudoTest); + else + bRet = hal_EfusePgPacketWrite1ByteHeader(pAdapter, efuseType, pAddr, pTargetPkt, bPseudoTest); + + return bRet; +} + +static bool wordEnMatched(struct pgpkt *pTargetPkt, struct pgpkt *pCurPkt, + u8 *pWden) +{ + u8 match_word_en = 0x0F; /* default all words are disabled */ + + /* check if the same words are enabled both target and current PG packet */ + if (((pTargetPkt->word_en & BIT0) == 0) && + ((pCurPkt->word_en & BIT0) == 0)) + match_word_en &= ~BIT0; /* enable word 0 */ + if (((pTargetPkt->word_en & BIT1) == 0) && + ((pCurPkt->word_en & BIT1) == 0)) + match_word_en &= ~BIT1; /* enable word 1 */ + if (((pTargetPkt->word_en & BIT2) == 0) && + ((pCurPkt->word_en & BIT2) == 0)) + match_word_en &= ~BIT2; /* enable word 2 */ + if (((pTargetPkt->word_en & BIT3) == 0) && + ((pCurPkt->word_en & BIT3) == 0)) + match_word_en &= ~BIT3; /* enable word 3 */ + + *pWden = match_word_en; + + if (match_word_en != 0xf) + return true; + else + return false; +} + +static bool hal_EfuseCheckIfDatafollowed(struct adapter *pAdapter, u8 word_cnts, u16 startAddr, bool bPseudoTest) +{ + bool bRet = false; + u8 i, efuse_data; + + for (i = 0; i < (word_cnts*2); i++) { + if (efuse_OneByteRead(pAdapter, (startAddr+i), &efuse_data, bPseudoTest) && (efuse_data != 0xFF)) + bRet = true; + } + return bRet; +} + +static bool hal_EfusePartialWriteCheck(struct adapter *pAdapter, u8 efuseType, u16 *pAddr, struct pgpkt *pTargetPkt, bool bPseudoTest) +{ + bool bRet = false; + u8 i, efuse_data = 0, cur_header = 0; + u8 matched_wden = 0, badworden = 0; + u16 startAddr = 0, efuse_max_available_len = 0, efuse_max = 0; + struct pgpkt curPkt; + + EFUSE_GetEfuseDefinition(pAdapter, efuseType, TYPE_AVAILABLE_EFUSE_BYTES_BANK, (void *)&efuse_max_available_len, bPseudoTest); + EFUSE_GetEfuseDefinition(pAdapter, efuseType, TYPE_EFUSE_REAL_CONTENT_LEN, (void *)&efuse_max, bPseudoTest); + + if (efuseType == EFUSE_WIFI) { + if (bPseudoTest) { + startAddr = (u16)(fakeEfuseUsedBytes%EFUSE_REAL_CONTENT_LEN); + } else { + rtw_hal_get_hwreg(pAdapter, HW_VAR_EFUSE_BYTES, (u8 *)&startAddr); + startAddr %= EFUSE_REAL_CONTENT_LEN; + } + } else { + if (bPseudoTest) + startAddr = (u16)(fakeBTEfuseUsedBytes%EFUSE_REAL_CONTENT_LEN); + else + startAddr = (u16)(BTEfuseUsedBytes%EFUSE_REAL_CONTENT_LEN); + } + + while (1) { + if (startAddr >= efuse_max_available_len) { + bRet = false; + break; + } + + if (efuse_OneByteRead(pAdapter, startAddr, &efuse_data, bPseudoTest) && (efuse_data != 0xFF)) { + if (EXT_HEADER(efuse_data)) { + cur_header = efuse_data; + startAddr++; + efuse_OneByteRead(pAdapter, startAddr, &efuse_data, bPseudoTest); + if (ALL_WORDS_DISABLED(efuse_data)) { + bRet = false; + break; + } else { + curPkt.offset = ((cur_header & 0xE0) >> 5) | ((efuse_data & 0xF0) >> 1); + curPkt.word_en = efuse_data & 0x0F; + } + } else { + cur_header = efuse_data; + curPkt.offset = (cur_header>>4) & 0x0F; + curPkt.word_en = cur_header & 0x0F; + } + + curPkt.word_cnts = Efuse_CalculateWordCnts(curPkt.word_en); + /* if same header is found but no data followed */ + /* write some part of data followed by the header. */ + if ((curPkt.offset == pTargetPkt->offset) && + (!hal_EfuseCheckIfDatafollowed(pAdapter, curPkt.word_cnts, startAddr+1, bPseudoTest)) && + wordEnMatched(pTargetPkt, &curPkt, &matched_wden)) { + /* Here to write partial data */ + badworden = Efuse_WordEnableDataWrite(pAdapter, startAddr+1, matched_wden, pTargetPkt->data, bPseudoTest); + if (badworden != 0x0F) { + u32 PgWriteSuccess = 0; + /* if write fail on some words, write these bad words again */ + + PgWriteSuccess = Efuse_PgPacketWrite(pAdapter, pTargetPkt->offset, badworden, pTargetPkt->data, bPseudoTest); + + if (!PgWriteSuccess) { + bRet = false; /* write fail, return */ + break; + } + } + /* partial write ok, update the target packet for later use */ + for (i = 0; i < 4; i++) { + if ((matched_wden & (0x1<word_en |= (0x1<word_cnts = Efuse_CalculateWordCnts(pTargetPkt->word_en); + } + /* read from next header */ + startAddr = startAddr + (curPkt.word_cnts*2) + 1; + } else { + /* not used header, 0xff */ + *pAddr = startAddr; + bRet = true; + break; + } + } + return bRet; +} + +static bool +hal_EfusePgCheckAvailableAddr( + struct adapter *pAdapter, + u8 efuseType, + bool bPseudoTest + ) +{ + u16 efuse_max_available_len = 0; + + /* Change to check TYPE_EFUSE_MAP_LEN , beacuse 8188E raw 256, logic map over 256. */ + EFUSE_GetEfuseDefinition(pAdapter, EFUSE_WIFI, TYPE_EFUSE_MAP_LEN, (void *)&efuse_max_available_len, false); + + if (Efuse_GetCurrentSize(pAdapter, efuseType, bPseudoTest) >= efuse_max_available_len) + return false; + return true; +} + +static void hal_EfuseConstructPGPkt(u8 offset, u8 word_en, u8 *pData, struct pgpkt *pTargetPkt) +{ + _rtw_memset((void *)pTargetPkt->data, 0xFF, sizeof(u8)*8); + pTargetPkt->offset = offset; + pTargetPkt->word_en = word_en; + efuse_WordEnableDataRead(word_en, pData, pTargetPkt->data); + pTargetPkt->word_cnts = Efuse_CalculateWordCnts(pTargetPkt->word_en); +} + +static bool hal_EfusePgPacketWrite_8188e(struct adapter *pAdapter, u8 offset, u8 word_en, u8 *pData, bool bPseudoTest) +{ + struct pgpkt targetPkt; + u16 startAddr = 0; + u8 efuseType = EFUSE_WIFI; + + if (!hal_EfusePgCheckAvailableAddr(pAdapter, efuseType, bPseudoTest)) + return false; + + hal_EfuseConstructPGPkt(offset, word_en, pData, &targetPkt); + + if (!hal_EfusePartialWriteCheck(pAdapter, efuseType, &startAddr, &targetPkt, bPseudoTest)) + return false; + + if (!hal_EfusePgPacketWriteHeader(pAdapter, efuseType, &startAddr, &targetPkt, bPseudoTest)) + return false; + + if (!hal_EfusePgPacketWriteData(pAdapter, efuseType, &startAddr, &targetPkt, bPseudoTest)) + return false; + + return true; +} + +static int Hal_EfusePgPacketWrite_Pseudo(struct adapter *pAdapter, u8 offset, u8 word_en, u8 *data, bool bPseudoTest) +{ + int ret; + + ret = hal_EfusePgPacketWrite_8188e(pAdapter, offset, word_en, data, bPseudoTest); + return ret; +} + +static int Hal_EfusePgPacketWrite(struct adapter *pAdapter, u8 offset, u8 word_en, u8 *data, bool bPseudoTest) +{ + int ret = 0; + ret = hal_EfusePgPacketWrite_8188e(pAdapter, offset, word_en, data, bPseudoTest); + + return ret; +} + +static int rtl8188e_Efuse_PgPacketWrite(struct adapter *pAdapter, u8 offset, u8 word_en, u8 *data, bool bPseudoTest) +{ + int ret; + + if (bPseudoTest) + ret = Hal_EfusePgPacketWrite_Pseudo (pAdapter, offset, word_en, data, bPseudoTest); + else + ret = Hal_EfusePgPacketWrite(pAdapter, offset, word_en, data, bPseudoTest); + return ret; +} + +static struct HAL_VERSION ReadChipVersion8188E(struct adapter *padapter) +{ + u32 value32; + struct HAL_VERSION ChipVersion; + struct hal_data_8188e *pHalData; + + pHalData = GET_HAL_DATA(padapter); + + value32 = rtw_read32(padapter, REG_SYS_CFG); + ChipVersion.ICType = CHIP_8188E; + ChipVersion.ChipType = ((value32 & RTL_ID) ? TEST_CHIP : NORMAL_CHIP); + + ChipVersion.RFType = RF_TYPE_1T1R; + ChipVersion.VendorType = ((value32 & VENDOR_ID) ? CHIP_VENDOR_UMC : CHIP_VENDOR_TSMC); + ChipVersion.CUTVersion = (value32 & CHIP_VER_RTL_MASK)>>CHIP_VER_RTL_SHIFT; /* IC version (CUT) */ + + /* For regulator mode. by tynli. 2011.01.14 */ + pHalData->RegulatorMode = ((value32 & TRP_BT_EN) ? RT_LDO_REGULATOR : RT_SWITCHING_REGULATOR); + + ChipVersion.ROMVer = 0; /* ROM code version. */ + pHalData->MultiFunc = RT_MULTI_FUNC_NONE; + + dump_chip_info(ChipVersion); + + pHalData->VersionID = ChipVersion; + + if (IS_1T2R(ChipVersion)) { + pHalData->rf_type = RF_1T2R; + pHalData->NumTotalRFPath = 2; + } else if (IS_2T2R(ChipVersion)) { + pHalData->rf_type = RF_2T2R; + pHalData->NumTotalRFPath = 2; + } else{ + pHalData->rf_type = RF_1T1R; + pHalData->NumTotalRFPath = 1; + } + + MSG_88E("RF_Type is %x!!\n", pHalData->rf_type); + + return ChipVersion; +} + +static void rtl8188e_read_chip_version(struct adapter *padapter) +{ + ReadChipVersion8188E(padapter); +} + +static void rtl8188e_GetHalODMVar(struct adapter *Adapter, enum hal_odm_variable eVariable, void *pValue1, bool bSet) +{ +} + +static void rtl8188e_SetHalODMVar(struct adapter *Adapter, enum hal_odm_variable eVariable, void *pValue1, bool bSet) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter); + struct odm_dm_struct *podmpriv = &pHalData->odmpriv; + switch (eVariable) { + case HAL_ODM_STA_INFO: + { + struct sta_info *psta = (struct sta_info *)pValue1; + if (bSet) { + DBG_88E("### Set STA_(%d) info\n", psta->mac_id); + ODM_CmnInfoPtrArrayHook(podmpriv, ODM_CMNINFO_STA_STATUS, psta->mac_id, psta); + ODM_RAInfo_Init(podmpriv, psta->mac_id); + } else { + DBG_88E("### Clean STA_(%d) info\n", psta->mac_id); + ODM_CmnInfoPtrArrayHook(podmpriv, ODM_CMNINFO_STA_STATUS, psta->mac_id, NULL); + } + } + break; + case HAL_ODM_P2P_STATE: + ODM_CmnInfoUpdate(podmpriv, ODM_CMNINFO_WIFI_DIRECT, bSet); + break; + case HAL_ODM_WIFI_DISPLAY_STATE: + ODM_CmnInfoUpdate(podmpriv, ODM_CMNINFO_WIFI_DISPLAY, bSet); + break; + default: + break; + } +} + +void rtl8188e_clone_haldata(struct adapter *dst_adapter, struct adapter *src_adapter) +{ + memcpy(dst_adapter->HalData, src_adapter->HalData, dst_adapter->hal_data_sz); +} + +void rtl8188e_start_thread(struct adapter *padapter) +{ +} + +void rtl8188e_stop_thread(struct adapter *padapter) +{ +} + +static void hal_notch_filter_8188e(struct adapter *adapter, bool enable) +{ + if (enable) { + DBG_88E("Enable notch filter\n"); + rtw_write8(adapter, rOFDM0_RxDSP+1, rtw_read8(adapter, rOFDM0_RxDSP+1) | BIT1); + } else { + DBG_88E("Disable notch filter\n"); + rtw_write8(adapter, rOFDM0_RxDSP+1, rtw_read8(adapter, rOFDM0_RxDSP+1) & ~BIT1); + } +} +void rtl8188e_set_hal_ops(struct hal_ops *pHalFunc) +{ + pHalFunc->free_hal_data = &rtl8188e_free_hal_data; + + pHalFunc->dm_init = &rtl8188e_init_dm_priv; + pHalFunc->dm_deinit = &rtl8188e_deinit_dm_priv; + + pHalFunc->read_chip_version = &rtl8188e_read_chip_version; + + pHalFunc->set_bwmode_handler = &PHY_SetBWMode8188E; + pHalFunc->set_channel_handler = &PHY_SwChnl8188E; + + pHalFunc->hal_dm_watchdog = &rtl8188e_HalDmWatchDog; + + pHalFunc->Add_RateATid = &rtl8188e_Add_RateATid; + pHalFunc->run_thread = &rtl8188e_start_thread; + pHalFunc->cancel_thread = &rtl8188e_stop_thread; + + pHalFunc->AntDivBeforeLinkHandler = &AntDivBeforeLink8188E; + pHalFunc->AntDivCompareHandler = &AntDivCompare8188E; + pHalFunc->read_bbreg = &rtl8188e_PHY_QueryBBReg; + pHalFunc->write_bbreg = &rtl8188e_PHY_SetBBReg; + pHalFunc->read_rfreg = &rtl8188e_PHY_QueryRFReg; + pHalFunc->write_rfreg = &rtl8188e_PHY_SetRFReg; + + /* Efuse related function */ + pHalFunc->EfusePowerSwitch = &rtl8188e_EfusePowerSwitch; + pHalFunc->ReadEFuse = &rtl8188e_ReadEFuse; + pHalFunc->EFUSEGetEfuseDefinition = &rtl8188e_EFUSE_GetEfuseDefinition; + pHalFunc->EfuseGetCurrentSize = &rtl8188e_EfuseGetCurrentSize; + pHalFunc->Efuse_PgPacketRead = &rtl8188e_Efuse_PgPacketRead; + pHalFunc->Efuse_PgPacketWrite = &rtl8188e_Efuse_PgPacketWrite; + pHalFunc->Efuse_WordEnableDataWrite = &rtl8188e_Efuse_WordEnableDataWrite; + + pHalFunc->sreset_init_value = &sreset_init_value; + pHalFunc->sreset_reset_value = &sreset_reset_value; + pHalFunc->silentreset = &rtl8188e_silentreset_for_specific_platform; + pHalFunc->sreset_xmit_status_check = &rtl8188e_sreset_xmit_status_check; + pHalFunc->sreset_linked_status_check = &rtl8188e_sreset_linked_status_check; + pHalFunc->sreset_get_wifi_status = &sreset_get_wifi_status; + + pHalFunc->GetHalODMVarHandler = &rtl8188e_GetHalODMVar; + pHalFunc->SetHalODMVarHandler = &rtl8188e_SetHalODMVar; + + pHalFunc->IOL_exec_cmds_sync = &rtl8188e_IOL_exec_cmds_sync; + + pHalFunc->hal_notch_filter = &hal_notch_filter_8188e; +} + +u8 GetEEPROMSize8188E(struct adapter *padapter) +{ + u8 size = 0; + u32 cr; + + cr = rtw_read16(padapter, REG_9346CR); + /* 6: EEPROM used is 93C46, 4: boot from E-Fuse. */ + size = (cr & BOOT_FROM_EEPROM) ? 6 : 4; + + MSG_88E("EEPROM type is %s\n", size == 4 ? "E-FUSE" : "93C46"); + + return size; +} + +/* */ +/* */ +/* LLT R/W/Init function */ +/* */ +/* */ +static s32 _LLTWrite(struct adapter *padapter, u32 address, u32 data) +{ + s32 status = _SUCCESS; + s32 count = 0; + u32 value = _LLT_INIT_ADDR(address) | _LLT_INIT_DATA(data) | _LLT_OP(_LLT_WRITE_ACCESS); + u16 LLTReg = REG_LLT_INIT; + + rtw_write32(padapter, LLTReg, value); + + /* polling */ + do { + value = rtw_read32(padapter, LLTReg); + if (_LLT_NO_ACTIVE == _LLT_OP_VALUE(value)) + break; + + if (count > POLLING_LLT_THRESHOLD) { + RT_TRACE(_module_hal_init_c_, _drv_err_, ("Failed to polling write LLT done at address %d!\n", address)); + status = _FAIL; + break; + } + } while (count++); + + return status; +} + +s32 InitLLTTable(struct adapter *padapter, u8 txpktbuf_bndy) +{ + s32 status = _FAIL; + u32 i; + u32 Last_Entry_Of_TxPktBuf = LAST_ENTRY_OF_TX_PKT_BUFFER;/* 176, 22k */ + + if (rtw_IOL_applied(padapter)) { + status = iol_InitLLTTable(padapter, txpktbuf_bndy); + } else { + for (i = 0; i < (txpktbuf_bndy - 1); i++) { + status = _LLTWrite(padapter, i, i + 1); + if (_SUCCESS != status) + return status; + } + + /* end of list */ + status = _LLTWrite(padapter, (txpktbuf_bndy - 1), 0xFF); + if (_SUCCESS != status) + return status; + + /* Make the other pages as ring buffer */ + /* This ring buffer is used as beacon buffer if we config this MAC as two MAC transfer. */ + /* Otherwise used as local loopback buffer. */ + for (i = txpktbuf_bndy; i < Last_Entry_Of_TxPktBuf; i++) { + status = _LLTWrite(padapter, i, (i + 1)); + if (_SUCCESS != status) + return status; + } + + /* Let last entry point to the start entry of ring buffer */ + status = _LLTWrite(padapter, Last_Entry_Of_TxPktBuf, txpktbuf_bndy); + if (_SUCCESS != status) { + return status; + } + } + + return status; +} + +void +Hal_InitPGData88E(struct adapter *padapter) +{ + struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(padapter); + + if (!pEEPROM->bautoload_fail_flag) { /* autoload OK. */ + if (!is_boot_from_eeprom(padapter)) { + /* Read EFUSE real map to shadow. */ + EFUSE_ShadowMapUpdate(padapter, EFUSE_WIFI, false); + } + } else {/* autoload fail */ + RT_TRACE(_module_hci_hal_init_c_, _drv_notice_, ("AutoLoad Fail reported from CR9346!!\n")); + /* update to default value 0xFF */ + if (!is_boot_from_eeprom(padapter)) + EFUSE_ShadowMapUpdate(padapter, EFUSE_WIFI, false); + } +} + +void +Hal_EfuseParseIDCode88E( + struct adapter *padapter, + u8 *hwinfo + ) +{ + struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(padapter); + u16 EEPROMId; + + /* Checl 0x8129 again for making sure autoload status!! */ + EEPROMId = le16_to_cpu(*((__le16 *)hwinfo)); + if (EEPROMId != RTL_EEPROM_ID) { + DBG_88E("EEPROM ID(%#x) is invalid!!\n", EEPROMId); + pEEPROM->bautoload_fail_flag = true; + } else { + pEEPROM->bautoload_fail_flag = false; + } + + DBG_88E("EEPROM ID = 0x%04x\n", EEPROMId); +} + +static void Hal_ReadPowerValueFromPROM_8188E(struct txpowerinfo24g *pwrInfo24G, u8 *PROMContent, bool AutoLoadFail) +{ + u32 rfPath, eeAddr = EEPROM_TX_PWR_INX_88E, group, TxCount = 0; + + _rtw_memset(pwrInfo24G, 0, sizeof(struct txpowerinfo24g)); + + if (AutoLoadFail) { + for (rfPath = 0; rfPath < MAX_RF_PATH; rfPath++) { + /* 2.4G default value */ + for (group = 0; group < MAX_CHNL_GROUP_24G; group++) { + pwrInfo24G->IndexCCK_Base[rfPath][group] = EEPROM_DEFAULT_24G_INDEX; + pwrInfo24G->IndexBW40_Base[rfPath][group] = EEPROM_DEFAULT_24G_INDEX; + } + for (TxCount = 0; TxCount < MAX_TX_COUNT; TxCount++) { + if (TxCount == 0) { + pwrInfo24G->BW20_Diff[rfPath][0] = EEPROM_DEFAULT_24G_HT20_DIFF; + pwrInfo24G->OFDM_Diff[rfPath][0] = EEPROM_DEFAULT_24G_OFDM_DIFF; + } else { + pwrInfo24G->BW20_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF; + pwrInfo24G->BW40_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF; + pwrInfo24G->CCK_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF; + pwrInfo24G->OFDM_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF; + } + } + } + return; + } + + for (rfPath = 0; rfPath < MAX_RF_PATH; rfPath++) { + /* 2.4G default value */ + for (group = 0; group < MAX_CHNL_GROUP_24G; group++) { + pwrInfo24G->IndexCCK_Base[rfPath][group] = PROMContent[eeAddr++]; + if (pwrInfo24G->IndexCCK_Base[rfPath][group] == 0xFF) + pwrInfo24G->IndexCCK_Base[rfPath][group] = EEPROM_DEFAULT_24G_INDEX; + } + for (group = 0; group < MAX_CHNL_GROUP_24G-1; group++) { + pwrInfo24G->IndexBW40_Base[rfPath][group] = PROMContent[eeAddr++]; + if (pwrInfo24G->IndexBW40_Base[rfPath][group] == 0xFF) + pwrInfo24G->IndexBW40_Base[rfPath][group] = EEPROM_DEFAULT_24G_INDEX; + } + for (TxCount = 0; TxCount < MAX_TX_COUNT; TxCount++) { + if (TxCount == 0) { + pwrInfo24G->BW40_Diff[rfPath][TxCount] = 0; + if (PROMContent[eeAddr] == 0xFF) { + pwrInfo24G->BW20_Diff[rfPath][TxCount] = EEPROM_DEFAULT_24G_HT20_DIFF; + } else { + pwrInfo24G->BW20_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0xf0)>>4; + if (pwrInfo24G->BW20_Diff[rfPath][TxCount] & BIT3) /* 4bit sign number to 8 bit sign number */ + pwrInfo24G->BW20_Diff[rfPath][TxCount] |= 0xF0; + } + + if (PROMContent[eeAddr] == 0xFF) { + pwrInfo24G->OFDM_Diff[rfPath][TxCount] = EEPROM_DEFAULT_24G_OFDM_DIFF; + } else { + pwrInfo24G->OFDM_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0x0f); + if (pwrInfo24G->OFDM_Diff[rfPath][TxCount] & BIT3) /* 4bit sign number to 8 bit sign number */ + pwrInfo24G->OFDM_Diff[rfPath][TxCount] |= 0xF0; + } + pwrInfo24G->CCK_Diff[rfPath][TxCount] = 0; + eeAddr++; + } else { + if (PROMContent[eeAddr] == 0xFF) { + pwrInfo24G->BW40_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF; + } else { + pwrInfo24G->BW40_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0xf0)>>4; + if (pwrInfo24G->BW40_Diff[rfPath][TxCount] & BIT3) /* 4bit sign number to 8 bit sign number */ + pwrInfo24G->BW40_Diff[rfPath][TxCount] |= 0xF0; + } + + if (PROMContent[eeAddr] == 0xFF) { + pwrInfo24G->BW20_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF; + } else { + pwrInfo24G->BW20_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0x0f); + if (pwrInfo24G->BW20_Diff[rfPath][TxCount] & BIT3) /* 4bit sign number to 8 bit sign number */ + pwrInfo24G->BW20_Diff[rfPath][TxCount] |= 0xF0; + } + eeAddr++; + + if (PROMContent[eeAddr] == 0xFF) { + pwrInfo24G->OFDM_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF; + } else { + pwrInfo24G->OFDM_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0xf0)>>4; + if (pwrInfo24G->OFDM_Diff[rfPath][TxCount] & BIT3) /* 4bit sign number to 8 bit sign number */ + pwrInfo24G->OFDM_Diff[rfPath][TxCount] |= 0xF0; + } + + if (PROMContent[eeAddr] == 0xFF) { + pwrInfo24G->CCK_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF; + } else { + pwrInfo24G->CCK_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0x0f); + if (pwrInfo24G->CCK_Diff[rfPath][TxCount] & BIT3) /* 4bit sign number to 8 bit sign number */ + pwrInfo24G->CCK_Diff[rfPath][TxCount] |= 0xF0; + } + eeAddr++; + } + } + } +} + +static u8 Hal_GetChnlGroup88E(u8 chnl, u8 *pGroup) +{ + u8 bIn24G = true; + + if (chnl <= 14) { + bIn24G = true; + + if (chnl < 3) /* Chanel 1-2 */ + *pGroup = 0; + else if (chnl < 6) /* Channel 3-5 */ + *pGroup = 1; + else if (chnl < 9) /* Channel 6-8 */ + *pGroup = 2; + else if (chnl < 12) /* Channel 9-11 */ + *pGroup = 3; + else if (chnl < 14) /* Channel 12-13 */ + *pGroup = 4; + else if (chnl == 14) /* Channel 14 */ + *pGroup = 5; + } else { + bIn24G = false; + + if (chnl <= 40) + *pGroup = 0; + else if (chnl <= 48) + *pGroup = 1; + else if (chnl <= 56) + *pGroup = 2; + else if (chnl <= 64) + *pGroup = 3; + else if (chnl <= 104) + *pGroup = 4; + else if (chnl <= 112) + *pGroup = 5; + else if (chnl <= 120) + *pGroup = 5; + else if (chnl <= 128) + *pGroup = 6; + else if (chnl <= 136) + *pGroup = 7; + else if (chnl <= 144) + *pGroup = 8; + else if (chnl <= 153) + *pGroup = 9; + else if (chnl <= 161) + *pGroup = 10; + else if (chnl <= 177) + *pGroup = 11; + } + return bIn24G; +} + +void Hal_ReadPowerSavingMode88E(struct adapter *padapter, u8 *hwinfo, bool AutoLoadFail) +{ + if (AutoLoadFail) { + padapter->pwrctrlpriv.bHWPowerdown = false; + padapter->pwrctrlpriv.bSupportRemoteWakeup = false; + } else { + /* hw power down mode selection , 0:rf-off / 1:power down */ + + if (padapter->registrypriv.hwpdn_mode == 2) + padapter->pwrctrlpriv.bHWPowerdown = (hwinfo[EEPROM_RF_FEATURE_OPTION_88E] & BIT4); + else + padapter->pwrctrlpriv.bHWPowerdown = padapter->registrypriv.hwpdn_mode; + + /* decide hw if support remote wakeup function */ + /* if hw supported, 8051 (SIE) will generate WeakUP signal(D+/D- toggle) when autoresume */ + padapter->pwrctrlpriv.bSupportRemoteWakeup = (hwinfo[EEPROM_USB_OPTIONAL_FUNCTION0] & BIT1) ? true : false; + + DBG_88E("%s...bHWPwrPindetect(%x)-bHWPowerdown(%x) , bSupportRemoteWakeup(%x)\n", __func__, + padapter->pwrctrlpriv.bHWPwrPindetect, padapter->pwrctrlpriv.bHWPowerdown , padapter->pwrctrlpriv.bSupportRemoteWakeup); + + DBG_88E("### PS params => power_mgnt(%x), usbss_enable(%x) ###\n", padapter->registrypriv.power_mgnt, padapter->registrypriv.usbss_enable); + } +} + +void Hal_ReadTxPowerInfo88E(struct adapter *padapter, u8 *PROMContent, bool AutoLoadFail) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(padapter); + struct txpowerinfo24g pwrInfo24G; + u8 rfPath, ch, group; + u8 bIn24G, TxCount; + + Hal_ReadPowerValueFromPROM_8188E(&pwrInfo24G, PROMContent, AutoLoadFail); + + if (!AutoLoadFail) + pHalData->bTXPowerDataReadFromEEPORM = true; + + for (rfPath = 0; rfPath < pHalData->NumTotalRFPath; rfPath++) { + for (ch = 0; ch <= CHANNEL_MAX_NUMBER; ch++) { + bIn24G = Hal_GetChnlGroup88E(ch, &group); + if (bIn24G) { + pHalData->Index24G_CCK_Base[rfPath][ch] = pwrInfo24G.IndexCCK_Base[rfPath][group]; + if (ch == 14) + pHalData->Index24G_BW40_Base[rfPath][ch] = pwrInfo24G.IndexBW40_Base[rfPath][4]; + else + pHalData->Index24G_BW40_Base[rfPath][ch] = pwrInfo24G.IndexBW40_Base[rfPath][group]; + } + if (bIn24G) { + DBG_88E("======= Path %d, Channel %d =======\n", rfPath, ch); + DBG_88E("Index24G_CCK_Base[%d][%d] = 0x%x\n", rfPath, ch , pHalData->Index24G_CCK_Base[rfPath][ch]); + DBG_88E("Index24G_BW40_Base[%d][%d] = 0x%x\n", rfPath, ch , pHalData->Index24G_BW40_Base[rfPath][ch]); + } + } + for (TxCount = 0; TxCount < MAX_TX_COUNT; TxCount++) { + pHalData->CCK_24G_Diff[rfPath][TxCount] = pwrInfo24G.CCK_Diff[rfPath][TxCount]; + pHalData->OFDM_24G_Diff[rfPath][TxCount] = pwrInfo24G.OFDM_Diff[rfPath][TxCount]; + pHalData->BW20_24G_Diff[rfPath][TxCount] = pwrInfo24G.BW20_Diff[rfPath][TxCount]; + pHalData->BW40_24G_Diff[rfPath][TxCount] = pwrInfo24G.BW40_Diff[rfPath][TxCount]; + DBG_88E("======= TxCount %d =======\n", TxCount); + DBG_88E("CCK_24G_Diff[%d][%d] = %d\n", rfPath, TxCount, pHalData->CCK_24G_Diff[rfPath][TxCount]); + DBG_88E("OFDM_24G_Diff[%d][%d] = %d\n", rfPath, TxCount, pHalData->OFDM_24G_Diff[rfPath][TxCount]); + DBG_88E("BW20_24G_Diff[%d][%d] = %d\n", rfPath, TxCount, pHalData->BW20_24G_Diff[rfPath][TxCount]); + DBG_88E("BW40_24G_Diff[%d][%d] = %d\n", rfPath, TxCount, pHalData->BW40_24G_Diff[rfPath][TxCount]); + } + } + + /* 2010/10/19 MH Add Regulator recognize for CU. */ + if (!AutoLoadFail) { + pHalData->EEPROMRegulatory = (PROMContent[EEPROM_RF_BOARD_OPTION_88E]&0x7); /* bit0~2 */ + if (PROMContent[EEPROM_RF_BOARD_OPTION_88E] == 0xFF) + pHalData->EEPROMRegulatory = (EEPROM_DEFAULT_BOARD_OPTION&0x7); /* bit0~2 */ + } else { + pHalData->EEPROMRegulatory = 0; + } + DBG_88E("EEPROMRegulatory = 0x%x\n", pHalData->EEPROMRegulatory); +} + +void Hal_EfuseParseXtal_8188E(struct adapter *pAdapter, u8 *hwinfo, bool AutoLoadFail) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter); + + if (!AutoLoadFail) { + pHalData->CrystalCap = hwinfo[EEPROM_XTAL_88E]; + if (pHalData->CrystalCap == 0xFF) + pHalData->CrystalCap = EEPROM_Default_CrystalCap_88E; + } else { + pHalData->CrystalCap = EEPROM_Default_CrystalCap_88E; + } + DBG_88E("CrystalCap: 0x%2x\n", pHalData->CrystalCap); +} + +void Hal_EfuseParseBoardType88E(struct adapter *pAdapter, u8 *hwinfo, bool AutoLoadFail) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter); + + if (!AutoLoadFail) + pHalData->BoardType = ((hwinfo[EEPROM_RF_BOARD_OPTION_88E]&0xE0)>>5); + else + pHalData->BoardType = 0; + DBG_88E("Board Type: 0x%2x\n", pHalData->BoardType); +} + +void Hal_EfuseParseEEPROMVer88E(struct adapter *padapter, u8 *hwinfo, bool AutoLoadFail) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(padapter); + + if (!AutoLoadFail) { + pHalData->EEPROMVersion = hwinfo[EEPROM_VERSION_88E]; + if (pHalData->EEPROMVersion == 0xFF) + pHalData->EEPROMVersion = EEPROM_Default_Version; + } else { + pHalData->EEPROMVersion = 1; + } + RT_TRACE(_module_hci_hal_init_c_, _drv_info_, + ("Hal_EfuseParseEEPROMVer(), EEVer = %d\n", + pHalData->EEPROMVersion)); +} + +void rtl8188e_EfuseParseChnlPlan(struct adapter *padapter, u8 *hwinfo, bool AutoLoadFail) +{ + padapter->mlmepriv.ChannelPlan = + hal_com_get_channel_plan(padapter, + hwinfo ? hwinfo[EEPROM_ChannelPlan_88E] : 0xFF, + padapter->registrypriv.channel_plan, + RT_CHANNEL_DOMAIN_WORLD_WIDE_13, AutoLoadFail); + + DBG_88E("mlmepriv.ChannelPlan = 0x%02x\n", padapter->mlmepriv.ChannelPlan); +} + +void Hal_EfuseParseCustomerID88E(struct adapter *padapter, u8 *hwinfo, bool AutoLoadFail) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(padapter); + + if (!AutoLoadFail) { + pHalData->EEPROMCustomerID = hwinfo[EEPROM_CUSTOMERID_88E]; + } else { + pHalData->EEPROMCustomerID = 0; + pHalData->EEPROMSubCustomerID = 0; + } + DBG_88E("EEPROM Customer ID: 0x%2x\n", pHalData->EEPROMCustomerID); +} + +void Hal_ReadAntennaDiversity88E(struct adapter *pAdapter, u8 *PROMContent, bool AutoLoadFail) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter); + struct registry_priv *registry_par = &pAdapter->registrypriv; + + if (!AutoLoadFail) { + /* Antenna Diversity setting. */ + if (registry_par->antdiv_cfg == 2) { /* 2:By EFUSE */ + pHalData->AntDivCfg = (PROMContent[EEPROM_RF_BOARD_OPTION_88E]&0x18)>>3; + if (PROMContent[EEPROM_RF_BOARD_OPTION_88E] == 0xFF) + pHalData->AntDivCfg = (EEPROM_DEFAULT_BOARD_OPTION&0x18)>>3;; + } else { + pHalData->AntDivCfg = registry_par->antdiv_cfg; /* 0:OFF , 1:ON, 2:By EFUSE */ + } + + if (registry_par->antdiv_type == 0) { + /* If TRxAntDivType is AUTO in advanced setting, use EFUSE value instead. */ + pHalData->TRxAntDivType = PROMContent[EEPROM_RF_ANTENNA_OPT_88E]; + if (pHalData->TRxAntDivType == 0xFF) + pHalData->TRxAntDivType = CG_TRX_HW_ANTDIV; /* For 88EE, 1Tx and 1RxCG are fixed.(1Ant, Tx and RxCG are both on aux port) */ + } else { + pHalData->TRxAntDivType = registry_par->antdiv_type; + } + + if (pHalData->TRxAntDivType == CG_TRX_HW_ANTDIV || pHalData->TRxAntDivType == CGCS_RX_HW_ANTDIV) + pHalData->AntDivCfg = 1; /* 0xC1[3] is ignored. */ + } else { + pHalData->AntDivCfg = 0; + pHalData->TRxAntDivType = pHalData->TRxAntDivType; /* The value in the driver setting of device manager. */ + } + DBG_88E("EEPROM : AntDivCfg = %x, TRxAntDivType = %x\n", pHalData->AntDivCfg, pHalData->TRxAntDivType); +} + +void Hal_ReadThermalMeter_88E(struct adapter *Adapter, u8 *PROMContent, bool AutoloadFail) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter); + + /* ThermalMeter from EEPROM */ + if (!AutoloadFail) + pHalData->EEPROMThermalMeter = PROMContent[EEPROM_THERMAL_METER_88E]; + else + pHalData->EEPROMThermalMeter = EEPROM_Default_ThermalMeter_88E; + + if (pHalData->EEPROMThermalMeter == 0xff || AutoloadFail) { + pHalData->bAPKThermalMeterIgnore = true; + pHalData->EEPROMThermalMeter = EEPROM_Default_ThermalMeter_88E; + } + DBG_88E("ThermalMeter = 0x%x\n", pHalData->EEPROMThermalMeter); +} + +void Hal_InitChannelPlan(struct adapter *padapter) +{ +} + +bool HalDetectPwrDownMode88E(struct adapter *Adapter) +{ + u8 tmpvalue = 0; + struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter); + struct pwrctrl_priv *pwrctrlpriv = &Adapter->pwrctrlpriv; + + EFUSE_ShadowRead(Adapter, 1, EEPROM_RF_FEATURE_OPTION_88E, (u32 *)&tmpvalue); + + /* 2010/08/25 MH INF priority > PDN Efuse value. */ + if (tmpvalue & BIT(4) && pwrctrlpriv->reg_pdnmode) + pHalData->pwrdown = true; + else + pHalData->pwrdown = false; + + DBG_88E("HalDetectPwrDownMode(): PDN =%d\n", pHalData->pwrdown); + + return pHalData->pwrdown; +} /* HalDetectPwrDownMode */ + +/* This function is used only for 92C to set REG_BCN_CTRL(0x550) register. */ +/* We just reserve the value of the register in variable pHalData->RegBcnCtrlVal and then operate */ +/* the value of the register via atomic operation. */ +/* This prevents from race condition when setting this register. */ +/* The value of pHalData->RegBcnCtrlVal is initialized in HwConfigureRTL8192CE() function. */ + +void SetBcnCtrlReg(struct adapter *padapter, u8 SetBits, u8 ClearBits) +{ + struct hal_data_8188e *pHalData; + + pHalData = GET_HAL_DATA(padapter); + + pHalData->RegBcnCtrlVal |= SetBits; + pHalData->RegBcnCtrlVal &= ~ClearBits; + + rtw_write8(padapter, REG_BCN_CTRL, (u8)pHalData->RegBcnCtrlVal); +} diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_mp.c b/drivers/staging/rtl8188eu/hal/rtl8188e_mp.c new file mode 100644 index 0000000..e97ba02 --- /dev/null +++ b/drivers/staging/rtl8188eu/hal/rtl8188e_mp.c @@ -0,0 +1,860 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * + ******************************************************************************/ +#define _RTL8188E_MP_C_ + +#include +#include +#include +#include + +s32 Hal_SetPowerTracking(struct adapter *padapter, u8 enable) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(padapter); + struct odm_dm_struct *pDM_Odm = &(pHalData->odmpriv); + + if (!netif_running(padapter->pnetdev)) { + RT_TRACE(_module_mp_, _drv_warning_, + ("SetPowerTracking! Fail: interface not opened!\n")); + return _FAIL; + } + + if (!check_fwstate(&padapter->mlmepriv, WIFI_MP_STATE)) { + RT_TRACE(_module_mp_, _drv_warning_, + ("SetPowerTracking! Fail: not in MP mode!\n")); + return _FAIL; + } + + if (enable) + pDM_Odm->RFCalibrateInfo.bTXPowerTracking = true; + else + pDM_Odm->RFCalibrateInfo.bTXPowerTrackingInit = false; + + return _SUCCESS; +} + +void Hal_GetPowerTracking(struct adapter *padapter, u8 *enable) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(padapter); + struct odm_dm_struct *pDM_Odm = &(pHalData->odmpriv); + + *enable = pDM_Odm->RFCalibrateInfo.TxPowerTrackControl; +} + +/*----------------------------------------------------------------------------- + * Function: mpt_SwitchRfSetting + * + * Overview: Change RF Setting when we siwthc channel/rate/BW for MP. + * + * Input: struct adapter * pAdapter + * + * Output: NONE + * + * Return: NONE + * + * Revised History: + * When Who Remark + * 01/08/2009 MHC Suggestion from SD3 Willis for 92S series. + * 01/09/2009 MHC Add CCK modification for 40MHZ. Suggestion from SD3. + * + *---------------------------------------------------------------------------*/ +void Hal_mpt_SwitchRfSetting(struct adapter *pAdapter) +{ + struct mp_priv *pmp = &pAdapter->mppriv; + + /* <20120525, Kordan> Dynamic mechanism for APK, asked by Dennis. */ + pmp->MptCtx.backup0x52_RF_A = (u8)PHY_QueryRFReg(pAdapter, RF_PATH_A, RF_0x52, 0x000F0); + pmp->MptCtx.backup0x52_RF_B = (u8)PHY_QueryRFReg(pAdapter, RF_PATH_B, RF_0x52, 0x000F0); + PHY_SetRFReg(pAdapter, RF_PATH_A, RF_0x52, 0x000F0, 0xD); + PHY_SetRFReg(pAdapter, RF_PATH_B, RF_0x52, 0x000F0, 0xD); + + return; +} +/*---------------------------hal\rtl8192c\MPT_Phy.c---------------------------*/ + +/*---------------------------hal\rtl8192c\MPT_HelperFunc.c---------------------------*/ +void Hal_MPT_CCKTxPowerAdjust(struct adapter *Adapter, bool bInCH14) +{ + u32 TempVal = 0, TempVal2 = 0, TempVal3 = 0; + u32 CurrCCKSwingVal = 0, CCKSwingIndex = 12; + u8 i; + + /* get current cck swing value and check 0xa22 & 0xa23 later to match the table. */ + CurrCCKSwingVal = read_bbreg(Adapter, rCCK0_TxFilter1, bMaskHWord); + + if (!bInCH14) { + /* Readback the current bb cck swing value and compare with the table to */ + /* get the current swing index */ + for (i = 0; i < CCK_TABLE_SIZE; i++) { + if (((CurrCCKSwingVal&0xff) == (u32)CCKSwingTable_Ch1_Ch13[i][0]) && + (((CurrCCKSwingVal&0xff00)>>8) == (u32)CCKSwingTable_Ch1_Ch13[i][1])) { + CCKSwingIndex = i; + break; + } + } + + /* Write 0xa22 0xa23 */ + TempVal = CCKSwingTable_Ch1_Ch13[CCKSwingIndex][0] + + (CCKSwingTable_Ch1_Ch13[CCKSwingIndex][1]<<8); + + + /* Write 0xa24 ~ 0xa27 */ + TempVal2 = 0; + TempVal2 = CCKSwingTable_Ch1_Ch13[CCKSwingIndex][2] + + (CCKSwingTable_Ch1_Ch13[CCKSwingIndex][3]<<8) + + (CCKSwingTable_Ch1_Ch13[CCKSwingIndex][4]<<16)+ + (CCKSwingTable_Ch1_Ch13[CCKSwingIndex][5]<<24); + + /* Write 0xa28 0xa29 */ + TempVal3 = 0; + TempVal3 = CCKSwingTable_Ch1_Ch13[CCKSwingIndex][6] + + (CCKSwingTable_Ch1_Ch13[CCKSwingIndex][7]<<8); + } else { + for (i = 0; i < CCK_TABLE_SIZE; i++) { + if (((CurrCCKSwingVal&0xff) == (u32)CCKSwingTable_Ch14[i][0]) && + (((CurrCCKSwingVal&0xff00)>>8) == (u32)CCKSwingTable_Ch14[i][1])) { + CCKSwingIndex = i; + break; + } + } + + /* Write 0xa22 0xa23 */ + TempVal = CCKSwingTable_Ch14[CCKSwingIndex][0] + + (CCKSwingTable_Ch14[CCKSwingIndex][1]<<8); + + /* Write 0xa24 ~ 0xa27 */ + TempVal2 = 0; + TempVal2 = CCKSwingTable_Ch14[CCKSwingIndex][2] + + (CCKSwingTable_Ch14[CCKSwingIndex][3]<<8) + + (CCKSwingTable_Ch14[CCKSwingIndex][4]<<16)+ + (CCKSwingTable_Ch14[CCKSwingIndex][5]<<24); + + /* Write 0xa28 0xa29 */ + TempVal3 = 0; + TempVal3 = CCKSwingTable_Ch14[CCKSwingIndex][6] + + (CCKSwingTable_Ch14[CCKSwingIndex][7]<<8); + } + + write_bbreg(Adapter, rCCK0_TxFilter1, bMaskHWord, TempVal); + write_bbreg(Adapter, rCCK0_TxFilter2, bMaskDWord, TempVal2); + write_bbreg(Adapter, rCCK0_DebugPort, bMaskLWord, TempVal3); +} + +void Hal_MPT_CCKTxPowerAdjustbyIndex(struct adapter *pAdapter, bool beven) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter); + struct mpt_context *pMptCtx = &pAdapter->mppriv.MptCtx; + struct odm_dm_struct *pDM_Odm = &(pHalData->odmpriv); + s32 TempCCk; + u8 CCK_index, CCK_index_old = 0; + u8 Action = 0; /* 0: no action, 1: even->odd, 2:odd->even */ + s32 i = 0; + + + if (!IS_92C_SERIAL(pHalData->VersionID)) + return; + if (beven && !pMptCtx->bMptIndexEven) { + /* odd->even */ + Action = 2; + pMptCtx->bMptIndexEven = true; + } else if (!beven && pMptCtx->bMptIndexEven) { + /* even->odd */ + Action = 1; + pMptCtx->bMptIndexEven = false; + } + + if (Action != 0) { + /* Query CCK default setting From 0xa24 */ + TempCCk = read_bbreg(pAdapter, rCCK0_TxFilter2, bMaskDWord) & bMaskCCK; + for (i = 0; i < CCK_TABLE_SIZE; i++) { + if (pDM_Odm->RFCalibrateInfo.bCCKinCH14) { + if (_rtw_memcmp((void *)&TempCCk, (void *)&CCKSwingTable_Ch14[i][2], 4)) { + CCK_index_old = (u8)i; + break; + } + } else { + if (_rtw_memcmp((void *)&TempCCk, (void *)&CCKSwingTable_Ch1_Ch13[i][2], 4)) { + CCK_index_old = (u8)i; + break; + } + } + } + + if (Action == 1) + CCK_index = CCK_index_old - 1; + else + CCK_index = CCK_index_old + 1; + + /* Adjust CCK according to gain index */ + if (!pDM_Odm->RFCalibrateInfo.bCCKinCH14) { + rtw_write8(pAdapter, 0xa22, CCKSwingTable_Ch1_Ch13[CCK_index][0]); + rtw_write8(pAdapter, 0xa23, CCKSwingTable_Ch1_Ch13[CCK_index][1]); + rtw_write8(pAdapter, 0xa24, CCKSwingTable_Ch1_Ch13[CCK_index][2]); + rtw_write8(pAdapter, 0xa25, CCKSwingTable_Ch1_Ch13[CCK_index][3]); + rtw_write8(pAdapter, 0xa26, CCKSwingTable_Ch1_Ch13[CCK_index][4]); + rtw_write8(pAdapter, 0xa27, CCKSwingTable_Ch1_Ch13[CCK_index][5]); + rtw_write8(pAdapter, 0xa28, CCKSwingTable_Ch1_Ch13[CCK_index][6]); + rtw_write8(pAdapter, 0xa29, CCKSwingTable_Ch1_Ch13[CCK_index][7]); + } else { + rtw_write8(pAdapter, 0xa22, CCKSwingTable_Ch14[CCK_index][0]); + rtw_write8(pAdapter, 0xa23, CCKSwingTable_Ch14[CCK_index][1]); + rtw_write8(pAdapter, 0xa24, CCKSwingTable_Ch14[CCK_index][2]); + rtw_write8(pAdapter, 0xa25, CCKSwingTable_Ch14[CCK_index][3]); + rtw_write8(pAdapter, 0xa26, CCKSwingTable_Ch14[CCK_index][4]); + rtw_write8(pAdapter, 0xa27, CCKSwingTable_Ch14[CCK_index][5]); + rtw_write8(pAdapter, 0xa28, CCKSwingTable_Ch14[CCK_index][6]); + rtw_write8(pAdapter, 0xa29, CCKSwingTable_Ch14[CCK_index][7]); + } + } +} +/*---------------------------hal\rtl8192c\MPT_HelperFunc.c---------------------------*/ + +/* + * SetChannel + * Description + * Use H2C command to change channel, + * not only modify rf register, but also other setting need to be done. + */ +void Hal_SetChannel(struct adapter *pAdapter) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter); + struct mp_priv *pmp = &pAdapter->mppriv; + struct odm_dm_struct *pDM_Odm = &(pHalData->odmpriv); + u8 eRFPath; + u8 channel = pmp->channel; + + /* set RF channel register */ + for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++) + _write_rfreg(pAdapter, eRFPath, ODM_CHANNEL, 0x3FF, channel); + Hal_mpt_SwitchRfSetting(pAdapter); + + SelectChannel(pAdapter, channel); + + if (pHalData->CurrentChannel == 14 && !pDM_Odm->RFCalibrateInfo.bCCKinCH14) { + pDM_Odm->RFCalibrateInfo.bCCKinCH14 = true; + Hal_MPT_CCKTxPowerAdjust(pAdapter, pDM_Odm->RFCalibrateInfo.bCCKinCH14); + } else if (pHalData->CurrentChannel != 14 && pDM_Odm->RFCalibrateInfo.bCCKinCH14) { + pDM_Odm->RFCalibrateInfo.bCCKinCH14 = false; + Hal_MPT_CCKTxPowerAdjust(pAdapter, pDM_Odm->RFCalibrateInfo.bCCKinCH14); + } +} + +/* + * Notice + * Switch bandwitdth may change center frequency(channel) + */ +void Hal_SetBandwidth(struct adapter *pAdapter) +{ + struct mp_priv *pmp = &pAdapter->mppriv; + + + SetBWMode(pAdapter, pmp->bandwidth, pmp->prime_channel_offset); + Hal_mpt_SwitchRfSetting(pAdapter); +} + +void Hal_SetCCKTxPower(struct adapter *pAdapter, u8 *TxPower) +{ + u32 tmpval = 0; + + + /* rf-A cck tx power */ + write_bbreg(pAdapter, rTxAGC_A_CCK1_Mcs32, bMaskByte1, TxPower[RF_PATH_A]); + tmpval = (TxPower[RF_PATH_A]<<16) | (TxPower[RF_PATH_A]<<8) | TxPower[RF_PATH_A]; + write_bbreg(pAdapter, rTxAGC_B_CCK11_A_CCK2_11, 0xffffff00, tmpval); + + /* rf-B cck tx power */ + write_bbreg(pAdapter, rTxAGC_B_CCK11_A_CCK2_11, bMaskByte0, TxPower[RF_PATH_B]); + tmpval = (TxPower[RF_PATH_B]<<16) | (TxPower[RF_PATH_B]<<8) | TxPower[RF_PATH_B]; + write_bbreg(pAdapter, rTxAGC_B_CCK1_55_Mcs32, 0xffffff00, tmpval); + + RT_TRACE(_module_mp_, _drv_notice_, + ("-SetCCKTxPower: A[0x%02x] B[0x%02x]\n", + TxPower[RF_PATH_A], TxPower[RF_PATH_B])); +} + +void Hal_SetOFDMTxPower(struct adapter *pAdapter, u8 *TxPower) +{ + u32 TxAGC = 0; + u8 tmpval = 0; + + /* HT Tx-rf(A) */ + tmpval = TxPower[RF_PATH_A]; + TxAGC = (tmpval<<24) | (tmpval<<16) | (tmpval<<8) | tmpval; + + write_bbreg(pAdapter, rTxAGC_A_Rate18_06, bMaskDWord, TxAGC); + write_bbreg(pAdapter, rTxAGC_A_Rate54_24, bMaskDWord, TxAGC); + write_bbreg(pAdapter, rTxAGC_A_Mcs03_Mcs00, bMaskDWord, TxAGC); + write_bbreg(pAdapter, rTxAGC_A_Mcs07_Mcs04, bMaskDWord, TxAGC); + write_bbreg(pAdapter, rTxAGC_A_Mcs11_Mcs08, bMaskDWord, TxAGC); + write_bbreg(pAdapter, rTxAGC_A_Mcs15_Mcs12, bMaskDWord, TxAGC); + + /* HT Tx-rf(B) */ + tmpval = TxPower[RF_PATH_B]; + TxAGC = (tmpval<<24) | (tmpval<<16) | (tmpval<<8) | tmpval; + + write_bbreg(pAdapter, rTxAGC_B_Rate18_06, bMaskDWord, TxAGC); + write_bbreg(pAdapter, rTxAGC_B_Rate54_24, bMaskDWord, TxAGC); + write_bbreg(pAdapter, rTxAGC_B_Mcs03_Mcs00, bMaskDWord, TxAGC); + write_bbreg(pAdapter, rTxAGC_B_Mcs07_Mcs04, bMaskDWord, TxAGC); + write_bbreg(pAdapter, rTxAGC_B_Mcs11_Mcs08, bMaskDWord, TxAGC); + write_bbreg(pAdapter, rTxAGC_B_Mcs15_Mcs12, bMaskDWord, TxAGC); +} + +void Hal_SetAntennaPathPower(struct adapter *pAdapter) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter); + u8 TxPowerLevel[MAX_RF_PATH_NUMS]; + u8 rfPath; + + TxPowerLevel[RF_PATH_A] = pAdapter->mppriv.txpoweridx; + TxPowerLevel[RF_PATH_B] = pAdapter->mppriv.txpoweridx_b; + + switch (pAdapter->mppriv.antenna_tx) { + case ANTENNA_A: + default: + rfPath = RF_PATH_A; + break; + case ANTENNA_B: + rfPath = RF_PATH_B; + break; + case ANTENNA_C: + rfPath = RF_PATH_C; + break; + } + + switch (pHalData->rf_chip) { + case RF_8225: + case RF_8256: + case RF_6052: + Hal_SetCCKTxPower(pAdapter, TxPowerLevel); + if (pAdapter->mppriv.rateidx < MPT_RATE_6M) /* CCK rate */ + Hal_MPT_CCKTxPowerAdjustbyIndex(pAdapter, TxPowerLevel[rfPath]%2 == 0); + Hal_SetOFDMTxPower(pAdapter, TxPowerLevel); + break; + default: + break; + } +} + +void Hal_SetTxPower(struct adapter *pAdapter) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter); + u8 TxPower = pAdapter->mppriv.txpoweridx; + u8 TxPowerLevel[MAX_RF_PATH_NUMS]; + u8 rf, rfPath; + + for (rf = 0; rf < MAX_RF_PATH_NUMS; rf++) + TxPowerLevel[rf] = TxPower; + + switch (pAdapter->mppriv.antenna_tx) { + case ANTENNA_A: + default: + rfPath = RF_PATH_A; + break; + case ANTENNA_B: + rfPath = RF_PATH_B; + break; + case ANTENNA_C: + rfPath = RF_PATH_C; + break; + } + + switch (pHalData->rf_chip) { + /* 2008/09/12 MH Test only !! We enable the TX power tracking for MP!!!!! */ + /* We should call normal driver API later!! */ + case RF_8225: + case RF_8256: + case RF_6052: + Hal_SetCCKTxPower(pAdapter, TxPowerLevel); + if (pAdapter->mppriv.rateidx < MPT_RATE_6M) /* CCK rate */ + Hal_MPT_CCKTxPowerAdjustbyIndex(pAdapter, TxPowerLevel[rfPath]%2 == 0); + Hal_SetOFDMTxPower(pAdapter, TxPowerLevel); + break; + default: + break; + } +} + +void Hal_SetDataRate(struct adapter *pAdapter) +{ + Hal_mpt_SwitchRfSetting(pAdapter); +} + +void Hal_SetAntenna(struct adapter *pAdapter) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter); + + struct ant_sel_ofdm *p_ofdm_tx; /* OFDM Tx register */ + struct ant_sel_cck *p_cck_txrx; + u8 r_rx_antenna_ofdm = 0, r_ant_select_cck_val = 0; + u8 chgTx = 0, chgRx = 0; + u32 r_ant_select_ofdm_val = 0, r_ofdm_tx_en_val = 0; + + + p_ofdm_tx = (struct ant_sel_ofdm *)&r_ant_select_ofdm_val; + p_cck_txrx = (struct ant_sel_cck *)&r_ant_select_cck_val; + + p_ofdm_tx->r_ant_ht1 = 0x1; + p_ofdm_tx->r_ant_ht2 = 0x2; /* Second TX RF path is A */ + p_ofdm_tx->r_ant_non_ht = 0x3; /* 0x1+0x2=0x3 */ + + switch (pAdapter->mppriv.antenna_tx) { + case ANTENNA_A: + p_ofdm_tx->r_tx_antenna = 0x1; + r_ofdm_tx_en_val = 0x1; + p_ofdm_tx->r_ant_l = 0x1; + p_ofdm_tx->r_ant_ht_s1 = 0x1; + p_ofdm_tx->r_ant_non_ht_s1 = 0x1; + p_cck_txrx->r_ccktx_enable = 0x8; + chgTx = 1; + + /* From SD3 Willis suggestion !!! Set RF A=TX and B as standby */ + write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter2, 0xe, 2); + write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter2, 0xe, 1); + r_ofdm_tx_en_val = 0x3; + + /* Power save */ + + /* We need to close RFB by SW control */ + if (pHalData->rf_type == RF_2T2R) { + PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 0); + PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 1); + PHY_SetBBReg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT10, 0); + PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT1, 1); + PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT17, 0); + } + break; + case ANTENNA_B: + p_ofdm_tx->r_tx_antenna = 0x2; + r_ofdm_tx_en_val = 0x2; + p_ofdm_tx->r_ant_l = 0x2; + p_ofdm_tx->r_ant_ht_s1 = 0x2; + p_ofdm_tx->r_ant_non_ht_s1 = 0x2; + p_cck_txrx->r_ccktx_enable = 0x4; + chgTx = 1; + /* From SD3 Willis suggestion !!! Set RF A as standby */ + PHY_SetBBReg(pAdapter, rFPGA0_XA_HSSIParameter2, 0xe, 1); + PHY_SetBBReg(pAdapter, rFPGA0_XB_HSSIParameter2, 0xe, 2); + + /* Power save */ + /* cosa r_ant_select_ofdm_val = 0x22222222; */ + + /* 2008/10/31 MH From SD3 Willi's suggestion. We must read RF 1T table. */ + /* 2009/01/08 MH From Sd3 Willis. We need to close RFA by SW control */ + if (pHalData->rf_type == RF_2T2R || pHalData->rf_type == RF_1T2R) { + PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 1); + PHY_SetBBReg(pAdapter, rFPGA0_XA_RFInterfaceOE, BIT10, 0); + PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 0); + PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT1, 0); + PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT17, 1); + } + break; + case ANTENNA_AB: /* For 8192S */ + p_ofdm_tx->r_tx_antenna = 0x3; + r_ofdm_tx_en_val = 0x3; + p_ofdm_tx->r_ant_l = 0x3; + p_ofdm_tx->r_ant_ht_s1 = 0x3; + p_ofdm_tx->r_ant_non_ht_s1 = 0x3; + p_cck_txrx->r_ccktx_enable = 0xC; + chgTx = 1; + + /* From SD3 Willis suggestion !!! Set RF B as standby */ + PHY_SetBBReg(pAdapter, rFPGA0_XA_HSSIParameter2, 0xe, 2); + PHY_SetBBReg(pAdapter, rFPGA0_XB_HSSIParameter2, 0xe, 2); + + /* Disable Power save */ + /* cosa r_ant_select_ofdm_val = 0x3321333; */ + /* 2009/01/08 MH From Sd3 Willis. We need to enable RFA/B by SW control */ + if (pHalData->rf_type == RF_2T2R) { + PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 0); + PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 0); + PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT1, 1); + PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT17, 1); + } + break; + default: + break; + } + + /* r_rx_antenna_ofdm, bit0=A, bit1=B, bit2=C, bit3=D */ + /* r_cckrx_enable : CCK default, 0=A, 1=B, 2=C, 3=D */ + /* r_cckrx_enable_2 : CCK option, 0=A, 1=B, 2=C, 3=D */ + switch (pAdapter->mppriv.antenna_rx) { + case ANTENNA_A: + r_rx_antenna_ofdm = 0x1; /* A */ + p_cck_txrx->r_cckrx_enable = 0x0; /* default: A */ + p_cck_txrx->r_cckrx_enable_2 = 0x0; /* option: A */ + chgRx = 1; + break; + case ANTENNA_B: + r_rx_antenna_ofdm = 0x2; /* B */ + p_cck_txrx->r_cckrx_enable = 0x1; /* default: B */ + p_cck_txrx->r_cckrx_enable_2 = 0x1; /* option: B */ + chgRx = 1; + break; + case ANTENNA_AB: + r_rx_antenna_ofdm = 0x3; /* AB */ + p_cck_txrx->r_cckrx_enable = 0x0; /* default:A */ + p_cck_txrx->r_cckrx_enable_2 = 0x1; /* option:B */ + chgRx = 1; + break; + default: + break; + } + + if (chgTx && chgRx) { + switch (pHalData->rf_chip) { + case RF_8225: + case RF_8256: + case RF_6052: + /* r_ant_sel_cck_val = r_ant_select_cck_val; */ + PHY_SetBBReg(pAdapter, rFPGA1_TxInfo, 0x7fffffff, r_ant_select_ofdm_val); /* OFDM Tx */ + PHY_SetBBReg(pAdapter, rFPGA0_TxInfo, 0x0000000f, r_ofdm_tx_en_val); /* OFDM Tx */ + PHY_SetBBReg(pAdapter, rOFDM0_TRxPathEnable, 0x0000000f, r_rx_antenna_ofdm); /* OFDM Rx */ + PHY_SetBBReg(pAdapter, rOFDM1_TRxPathEnable, 0x0000000f, r_rx_antenna_ofdm); /* OFDM Rx */ + PHY_SetBBReg(pAdapter, rCCK0_AFESetting, bMaskByte3, r_ant_select_cck_val); /* CCK TxRx */ + + break; + default: + break; + } + } + + RT_TRACE(_module_mp_, _drv_notice_, ("-SwitchAntenna: finished\n")); +} + +s32 Hal_SetThermalMeter(struct adapter *pAdapter, u8 target_ther) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter); + + + if (!netif_running(pAdapter->pnetdev)) { + RT_TRACE(_module_mp_, _drv_warning_, ("SetThermalMeter! Fail: interface not opened!\n")); + return _FAIL; + } + + if (check_fwstate(&pAdapter->mlmepriv, WIFI_MP_STATE) == false) { + RT_TRACE(_module_mp_, _drv_warning_, ("SetThermalMeter: Fail! not in MP mode!\n")); + return _FAIL; + } + + target_ther &= 0xff; + if (target_ther < 0x07) + target_ther = 0x07; + else if (target_ther > 0x1d) + target_ther = 0x1d; + + pHalData->EEPROMThermalMeter = target_ther; + + return _SUCCESS; +} + +void Hal_TriggerRFThermalMeter(struct adapter *pAdapter) +{ + _write_rfreg(pAdapter, RF_PATH_A , RF_T_METER_88E , BIT17 | BIT16 , 0x03); +} + +u8 Hal_ReadRFThermalMeter(struct adapter *pAdapter) +{ + u32 ThermalValue = 0; + + ThermalValue = _read_rfreg(pAdapter, RF_PATH_A, RF_T_METER_88E, 0xfc00); + return (u8)ThermalValue; +} + +void Hal_GetThermalMeter(struct adapter *pAdapter, u8 *value) +{ + Hal_TriggerRFThermalMeter(pAdapter); + rtw_msleep_os(1000); + *value = Hal_ReadRFThermalMeter(pAdapter); +} + +void Hal_SetSingleCarrierTx(struct adapter *pAdapter, u8 bStart) +{ + pAdapter->mppriv.MptCtx.bSingleCarrier = bStart; + if (bStart) { + /* Start Single Carrier. */ + RT_TRACE(_module_mp_, _drv_alert_, ("SetSingleCarrierTx: test start\n")); + /* 1. if OFDM block on? */ + if (!read_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn)) + write_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn, bEnable);/* set OFDM block on */ + + /* 2. set CCK test mode off, set to CCK normal mode */ + write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, bDisable); + /* 3. turn on scramble setting */ + write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable); + /* 4. Turn On Single Carrier Tx and turn off the other test modes. */ + write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable); + write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bEnable); + write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable); + /* for dynamic set Power index. */ + write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500); + write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500); + } else { + /* Stop Single Carrier. */ + RT_TRACE(_module_mp_, _drv_alert_, ("SetSingleCarrierTx: test stop\n")); + + /* Turn off all test modes. */ + write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable); + write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable); + write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable); + rtw_msleep_os(10); + + /* BB Reset */ + write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0); + write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1); + + /* Stop for dynamic set Power index. */ + write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100); + write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100); + } +} + + +void Hal_SetSingleToneTx(struct adapter *pAdapter, u8 bStart) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter); + bool is92C = IS_92C_SERIAL(pHalData->VersionID); + + u8 rfPath; + u32 reg58 = 0x0; + switch (pAdapter->mppriv.antenna_tx) { + case ANTENNA_A: + default: + rfPath = RF_PATH_A; + break; + case ANTENNA_B: + rfPath = RF_PATH_B; + break; + case ANTENNA_C: + rfPath = RF_PATH_C; + break; + } + + pAdapter->mppriv.MptCtx.bSingleTone = bStart; + if (bStart) { + /* Start Single Tone. */ + RT_TRACE(_module_mp_, _drv_alert_, ("SetSingleToneTx: test start\n")); + /* <20120326, Kordan> To amplify the power of tone for Xtal calibration. (asked by Edlu) */ + if (IS_HARDWARE_TYPE_8188E(pAdapter)) { + reg58 = PHY_QueryRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask); + reg58 &= 0xFFFFFFF0; + reg58 += 2; + PHY_SetRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask, reg58); + } + PHY_SetBBReg(pAdapter, rFPGA0_RFMOD, bCCKEn, 0x0); + PHY_SetBBReg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 0x0); + + if (is92C) { + _write_rfreg(pAdapter, RF_PATH_A, 0x21, BIT19, 0x01); + rtw_usleep_os(100); + if (rfPath == RF_PATH_A) + write_rfreg(pAdapter, RF_PATH_B, 0x00, 0x10000); /* PAD all on. */ + else if (rfPath == RF_PATH_B) + write_rfreg(pAdapter, RF_PATH_A, 0x00, 0x10000); /* PAD all on. */ + write_rfreg(pAdapter, rfPath, 0x00, 0x2001f); /* PAD all on. */ + rtw_usleep_os(100); + } else { + write_rfreg(pAdapter, rfPath, 0x21, 0xd4000); + rtw_usleep_os(100); + write_rfreg(pAdapter, rfPath, 0x00, 0x2001f); /* PAD all on. */ + rtw_usleep_os(100); + } + + /* for dynamic set Power index. */ + write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500); + write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500); + + } else { + /* Stop Single Tone. */ + RT_TRACE(_module_mp_, _drv_alert_, ("SetSingleToneTx: test stop\n")); + + /* <20120326, Kordan> To amplify the power of tone for Xtal calibration. (asked by Edlu) */ + /* <20120326, Kordan> Only in single tone mode. (asked by Edlu) */ + if (IS_HARDWARE_TYPE_8188E(pAdapter)) { + reg58 = PHY_QueryRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask); + reg58 &= 0xFFFFFFF0; + PHY_SetRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask, reg58); + } + write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, 0x1); + write_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 0x1); + if (is92C) { + _write_rfreg(pAdapter, RF_PATH_A, 0x21, BIT19, 0x00); + rtw_usleep_os(100); + write_rfreg(pAdapter, RF_PATH_A, 0x00, 0x32d75); /* PAD all on. */ + write_rfreg(pAdapter, RF_PATH_B, 0x00, 0x32d75); /* PAD all on. */ + rtw_usleep_os(100); + } else { + write_rfreg(pAdapter, rfPath, 0x21, 0x54000); + rtw_usleep_os(100); + write_rfreg(pAdapter, rfPath, 0x00, 0x30000); /* PAD all on. */ + rtw_usleep_os(100); + } + + /* Stop for dynamic set Power index. */ + write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100); + write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100); + } +} + + + +void Hal_SetCarrierSuppressionTx(struct adapter *pAdapter, u8 bStart) +{ + pAdapter->mppriv.MptCtx.bCarrierSuppression = bStart; + if (bStart) { + /* Start Carrier Suppression. */ + RT_TRACE(_module_mp_, _drv_alert_, ("SetCarrierSuppressionTx: test start\n")); + if (pAdapter->mppriv.rateidx <= MPT_RATE_11M) { + /* 1. if CCK block on? */ + if (!read_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn)) + write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, bEnable);/* set CCK block on */ + + /* Turn Off All Test Mode */ + write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable); + write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable); + write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable); + + write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x2); /* transmit mode */ + write_bbreg(pAdapter, rCCK0_System, bCCKScramble, 0x0); /* turn off scramble setting */ + + /* Set CCK Tx Test Rate */ + write_bbreg(pAdapter, rCCK0_System, bCCKTxRate, 0x0); /* Set FTxRate to 1Mbps */ + } + + /* for dynamic set Power index. */ + write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500); + write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500); + } else { + /* Stop Carrier Suppression. */ + RT_TRACE(_module_mp_, _drv_alert_, ("SetCarrierSuppressionTx: test stop\n")); + if (pAdapter->mppriv.rateidx <= MPT_RATE_11M) { + write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x0); /* normal mode */ + write_bbreg(pAdapter, rCCK0_System, bCCKScramble, 0x1); /* turn on scramble setting */ + + /* BB Reset */ + write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0); + write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1); + } + + /* Stop for dynamic set Power index. */ + write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100); + write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100); + } +} + +void Hal_SetCCKContinuousTx(struct adapter *pAdapter, u8 bStart) +{ + u32 cckrate; + + if (bStart) { + RT_TRACE(_module_mp_, _drv_alert_, + ("SetCCKContinuousTx: test start\n")); + + /* 1. if CCK block on? */ + if (!read_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn)) + write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, bEnable);/* set CCK block on */ + + /* Turn Off All Test Mode */ + write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable); + write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable); + write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable); + /* Set CCK Tx Test Rate */ + cckrate = pAdapter->mppriv.rateidx; + write_bbreg(pAdapter, rCCK0_System, bCCKTxRate, cckrate); + write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x2); /* transmit mode */ + write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable); /* turn on scramble setting */ + + /* for dynamic set Power index. */ + write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500); + write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500); + } else { + RT_TRACE(_module_mp_, _drv_info_, + ("SetCCKContinuousTx: test stop\n")); + + write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x0); /* normal mode */ + write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable); /* turn on scramble setting */ + + /* BB Reset */ + write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0); + write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1); + + /* Stop for dynamic set Power index. */ + write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100); + write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100); + } + + pAdapter->mppriv.MptCtx.bCckContTx = bStart; + pAdapter->mppriv.MptCtx.bOfdmContTx = false; +} /* mpt_StartCckContTx */ + +void Hal_SetOFDMContinuousTx(struct adapter *pAdapter, u8 bStart) +{ + if (bStart) { + RT_TRACE(_module_mp_, _drv_info_, ("SetOFDMContinuousTx: test start\n")); + /* 1. if OFDM block on? */ + if (!read_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn)) + write_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn, bEnable);/* set OFDM block on */ + + /* 2. set CCK test mode off, set to CCK normal mode */ + write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, bDisable); + + /* 3. turn on scramble setting */ + write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable); + /* 4. Turn On Continue Tx and turn off the other test modes. */ + write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bEnable); + write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable); + write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable); + + /* for dynamic set Power index. */ + write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500); + write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500); + + } else { + RT_TRACE(_module_mp_, _drv_info_, ("SetOFDMContinuousTx: test stop\n")); + write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable); + write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable); + write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable); + /* Delay 10 ms */ + rtw_msleep_os(10); + /* BB Reset */ + write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0); + write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1); + + /* Stop for dynamic set Power index. */ + write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100); + write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100); + } + + pAdapter->mppriv.MptCtx.bCckContTx = false; + pAdapter->mppriv.MptCtx.bOfdmContTx = bStart; +} /* mpt_StartOfdmContTx */ + +void Hal_SetContinuousTx(struct adapter *pAdapter, u8 bStart) +{ + RT_TRACE(_module_mp_, _drv_info_, + ("SetContinuousTx: rate:%d\n", pAdapter->mppriv.rateidx)); + + pAdapter->mppriv.MptCtx.bStartContTx = bStart; + if (pAdapter->mppriv.rateidx <= MPT_RATE_11M) + Hal_SetCCKContinuousTx(pAdapter, bStart); + else if ((pAdapter->mppriv.rateidx >= MPT_RATE_6M) && + (pAdapter->mppriv.rateidx <= MPT_RATE_MCS15)) + Hal_SetOFDMContinuousTx(pAdapter, bStart); +} diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c b/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c new file mode 100644 index 0000000..ff468a6 --- /dev/null +++ b/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c @@ -0,0 +1,1144 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * + ******************************************************************************/ +#define _RTL8188E_PHYCFG_C_ + +#include +#include +#include +#include + +/*---------------------------Define Local Constant---------------------------*/ +/* Channel switch:The size of command tables for switch channel*/ +#define MAX_PRECMD_CNT 16 +#define MAX_RFDEPENDCMD_CNT 16 +#define MAX_POSTCMD_CNT 16 + +#define MAX_DOZE_WAITING_TIMES_9x 64 + +/*---------------------------Define Local Constant---------------------------*/ + + +/*------------------------Define global variable-----------------------------*/ + +/*------------------------Define local variable------------------------------*/ + + +/*--------------------Define export function prototype-----------------------*/ +/* Please refer to header file */ +/*--------------------Define export function prototype-----------------------*/ + +/*----------------------------Function Body----------------------------------*/ +/* */ +/* 1. BB register R/W API */ +/* */ + +/** +* Function: phy_CalculateBitShift +* +* OverView: Get shifted position of the BitMask +* +* Input: +* u32 BitMask, +* +* Output: none +* Return: u32 Return the shift bit bit position of the mask +*/ +static u32 phy_CalculateBitShift(u32 BitMask) +{ + u32 i; + + for (i = 0; i <= 31; i++) { + if (((BitMask>>i) & 0x1) == 1) + break; + } + return i; +} + +/** +* Function: PHY_QueryBBReg +* +* OverView: Read "sepcific bits" from BB register +* +* Input: +* struct adapter *Adapter, +* u32 RegAddr, The target address to be readback +* u32 BitMask The target bit position in the target address +* to be readback +* Output: None +* Return: u32 Data The readback register value +* Note: This function is equal to "GetRegSetting" in PHY programming guide +*/ +u32 +rtl8188e_PHY_QueryBBReg( + struct adapter *Adapter, + u32 RegAddr, + u32 BitMask + ) +{ + u32 ReturnValue = 0, OriginalValue, BitShift; + + OriginalValue = rtw_read32(Adapter, RegAddr); + BitShift = phy_CalculateBitShift(BitMask); + ReturnValue = (OriginalValue & BitMask) >> BitShift; + return ReturnValue; +} + + +/** +* Function: PHY_SetBBReg +* +* OverView: Write "Specific bits" to BB register (page 8~) +* +* Input: +* struct adapter *Adapter, +* u32 RegAddr, The target address to be modified +* u32 BitMask The target bit position in the target address +* to be modified +* u32 Data The new register value in the target bit position +* of the target address +* +* Output: None +* Return: None +* Note: This function is equal to "PutRegSetting" in PHY programming guide +*/ + +void rtl8188e_PHY_SetBBReg(struct adapter *Adapter, u32 RegAddr, u32 BitMask, u32 Data) +{ + u32 OriginalValue, BitShift; + + if (BitMask != bMaskDWord) { /* if not "double word" write */ + OriginalValue = rtw_read32(Adapter, RegAddr); + BitShift = phy_CalculateBitShift(BitMask); + Data = ((OriginalValue & (~BitMask)) | (Data << BitShift)); + } + + rtw_write32(Adapter, RegAddr, Data); +} + + +/* */ +/* 2. RF register R/W API */ +/* */ +/** +* Function: phy_RFSerialRead +* +* OverView: Read regster from RF chips +* +* Input: +* struct adapter *Adapter, +* enum rf_radio_path eRFPath, Radio path of A/B/C/D +* u32 Offset, The target address to be read +* +* Output: None +* Return: u32 reback value +* Note: Threre are three types of serial operations: +* 1. Software serial write +* 2. Hardware LSSI-Low Speed Serial Interface +* 3. Hardware HSSI-High speed +* serial write. Driver need to implement (1) and (2). +* This function is equal to the combination of RF_ReadReg() and RFLSSIRead() +*/ +static u32 +phy_RFSerialRead( + struct adapter *Adapter, + enum rf_radio_path eRFPath, + u32 Offset + ) +{ + u32 retValue = 0; + struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter); + struct bb_reg_def *pPhyReg = &pHalData->PHYRegDef[eRFPath]; + u32 NewOffset; + u32 tmplong, tmplong2; + u8 RfPiEnable = 0; + /* */ + /* Make sure RF register offset is correct */ + /* */ + Offset &= 0xff; + + /* */ + /* Switch page for 8256 RF IC */ + /* */ + NewOffset = Offset; + + /* For 92S LSSI Read RFLSSIRead */ + /* For RF A/B write 0x824/82c(does not work in the future) */ + /* We must use 0x824 for RF A and B to execute read trigger */ + tmplong = PHY_QueryBBReg(Adapter, rFPGA0_XA_HSSIParameter2, bMaskDWord); + if (eRFPath == RF_PATH_A) + tmplong2 = tmplong; + else + tmplong2 = PHY_QueryBBReg(Adapter, pPhyReg->rfHSSIPara2, bMaskDWord); + + tmplong2 = (tmplong2 & (~bLSSIReadAddress)) | (NewOffset<<23) | bLSSIReadEdge; /* T65 RF */ + + PHY_SetBBReg(Adapter, rFPGA0_XA_HSSIParameter2, bMaskDWord, tmplong&(~bLSSIReadEdge)); + rtw_udelay_os(10);/* PlatformStallExecution(10); */ + + PHY_SetBBReg(Adapter, pPhyReg->rfHSSIPara2, bMaskDWord, tmplong2); + rtw_udelay_os(100);/* PlatformStallExecution(100); */ + + rtw_udelay_os(10);/* PlatformStallExecution(10); */ + + if (eRFPath == RF_PATH_A) + RfPiEnable = (u8)PHY_QueryBBReg(Adapter, rFPGA0_XA_HSSIParameter1, BIT8); + else if (eRFPath == RF_PATH_B) + RfPiEnable = (u8)PHY_QueryBBReg(Adapter, rFPGA0_XB_HSSIParameter1, BIT8); + + if (RfPiEnable) { /* Read from BBreg8b8, 12 bits for 8190, 20bits for T65 RF */ + retValue = PHY_QueryBBReg(Adapter, pPhyReg->rfLSSIReadBackPi, bLSSIReadBackData); + } else { /* Read from BBreg8a0, 12 bits for 8190, 20 bits for T65 RF */ + retValue = PHY_QueryBBReg(Adapter, pPhyReg->rfLSSIReadBack, bLSSIReadBackData); + } + return retValue; +} + +/** +* Function: phy_RFSerialWrite +* +* OverView: Write data to RF register (page 8~) +* +* Input: +* struct adapter *Adapter, +* enum rf_radio_path eRFPath, Radio path of A/B/C/D +* u32 Offset, The target address to be read +* u32 Data The new register Data in the target bit position +* of the target to be read +* +* Output: None +* Return: None +* Note: Threre are three types of serial operations: +* 1. Software serial write +* 2. Hardware LSSI-Low Speed Serial Interface +* 3. Hardware HSSI-High speed +* serial write. Driver need to implement (1) and (2). +* This function is equal to the combination of RF_ReadReg() and RFLSSIRead() + * + * Note: For RF8256 only + * The total count of RTL8256(Zebra4) register is around 36 bit it only employs + * 4-bit RF address. RTL8256 uses "register mode control bit" (Reg00[12], Reg00[10]) + * to access register address bigger than 0xf. See "Appendix-4 in PHY Configuration + * programming guide" for more details. + * Thus, we define a sub-finction for RTL8526 register address conversion + * =========================================================== + * Register Mode RegCTL[1] RegCTL[0] Note + * (Reg00[12]) (Reg00[10]) + * =========================================================== + * Reg_Mode0 0 x Reg 0 ~15(0x0 ~ 0xf) + * ------------------------------------------------------------------ + * Reg_Mode1 1 0 Reg 16 ~30(0x1 ~ 0xf) + * ------------------------------------------------------------------ + * Reg_Mode2 1 1 Reg 31 ~ 45(0x1 ~ 0xf) + * ------------------------------------------------------------------ + * + * 2008/09/02 MH Add 92S RF definition + * + * + * +*/ +static void +phy_RFSerialWrite( + struct adapter *Adapter, + enum rf_radio_path eRFPath, + u32 Offset, + u32 Data + ) +{ + u32 DataAndAddr = 0; + struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter); + struct bb_reg_def *pPhyReg = &pHalData->PHYRegDef[eRFPath]; + u32 NewOffset; + + + /* 2009/06/17 MH We can not execute IO for power save or other accident mode. */ + + Offset &= 0xff; + + /* */ + /* Switch page for 8256 RF IC */ + /* */ + NewOffset = Offset; + + /* */ + /* Put write addr in [5:0] and write data in [31:16] */ + /* */ + DataAndAddr = ((NewOffset<<20) | (Data&0x000fffff)) & 0x0fffffff; /* T65 RF */ + + /* */ + /* Write Operation */ + /* */ + PHY_SetBBReg(Adapter, pPhyReg->rf3wireOffset, bMaskDWord, DataAndAddr); +} + +/** +* Function: PHY_QueryRFReg +* +* OverView: Query "Specific bits" to RF register (page 8~) +* +* Input: +* struct adapter *Adapter, +* enum rf_radio_path eRFPath, Radio path of A/B/C/D +* u32 RegAddr, The target address to be read +* u32 BitMask The target bit position in the target address +* to be read +* +* Output: None +* Return: u32 Readback value +* Note: This function is equal to "GetRFRegSetting" in PHY programming guide +*/ +u32 rtl8188e_PHY_QueryRFReg(struct adapter *Adapter, enum rf_radio_path eRFPath, + u32 RegAddr, u32 BitMask) +{ + u32 Original_Value, Readback_Value, BitShift; + + Original_Value = phy_RFSerialRead(Adapter, eRFPath, RegAddr); + + BitShift = phy_CalculateBitShift(BitMask); + Readback_Value = (Original_Value & BitMask) >> BitShift; + return Readback_Value; +} + +/** +* Function: PHY_SetRFReg +* +* OverView: Write "Specific bits" to RF register (page 8~) +* +* Input: +* struct adapter *Adapter, +* enum rf_radio_path eRFPath, Radio path of A/B/C/D +* u32 RegAddr, The target address to be modified +* u32 BitMask The target bit position in the target address +* to be modified +* u32 Data The new register Data in the target bit position +* of the target address +* +* Output: None +* Return: None +* Note: This function is equal to "PutRFRegSetting" in PHY programming guide +*/ +void +rtl8188e_PHY_SetRFReg( + struct adapter *Adapter, + enum rf_radio_path eRFPath, + u32 RegAddr, + u32 BitMask, + u32 Data + ) +{ + u32 Original_Value, BitShift; + + /* RF data is 12 bits only */ + if (BitMask != bRFRegOffsetMask) { + Original_Value = phy_RFSerialRead(Adapter, eRFPath, RegAddr); + BitShift = phy_CalculateBitShift(BitMask); + Data = ((Original_Value & (~BitMask)) | (Data << BitShift)); + } + + phy_RFSerialWrite(Adapter, eRFPath, RegAddr, Data); +} + +/* */ +/* 3. Initial MAC/BB/RF config by reading MAC/BB/RF txt. */ +/* */ + +/*----------------------------------------------------------------------------- + * Function: PHY_MACConfig8192C + * + * Overview: Condig MAC by header file or parameter file. + * + * Input: NONE + * + * Output: NONE + * + * Return: NONE + * + * Revised History: + * When Who Remark + * 08/12/2008 MHC Create Version 0. + * + *---------------------------------------------------------------------------*/ +s32 PHY_MACConfig8188E(struct adapter *Adapter) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter); + int rtStatus = _SUCCESS; + + /* */ + /* Config MAC */ + /* */ + if (HAL_STATUS_FAILURE == ODM_ConfigMACWithHeaderFile(&pHalData->odmpriv)) + rtStatus = _FAIL; + + /* 2010.07.13 AMPDU aggregation number B */ + rtw_write16(Adapter, REG_MAX_AGGR_NUM, MAX_AGGR_NUM); + + return rtStatus; +} + +/** +* Function: phy_InitBBRFRegisterDefinition +* +* OverView: Initialize Register definition offset for Radio Path A/B/C/D +* +* Input: +* struct adapter *Adapter, +* +* Output: None +* Return: None +* Note: The initialization value is constant and it should never be changes +*/ +static void +phy_InitBBRFRegisterDefinition( + struct adapter *Adapter +) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter); + + /* RF Interface Sowrtware Control */ + pHalData->PHYRegDef[RF_PATH_A].rfintfs = rFPGA0_XAB_RFInterfaceSW; /* 16 LSBs if read 32-bit from 0x870 */ + pHalData->PHYRegDef[RF_PATH_B].rfintfs = rFPGA0_XAB_RFInterfaceSW; /* 16 MSBs if read 32-bit from 0x870 (16-bit for 0x872) */ + pHalData->PHYRegDef[RF_PATH_C].rfintfs = rFPGA0_XCD_RFInterfaceSW;/* 16 LSBs if read 32-bit from 0x874 */ + pHalData->PHYRegDef[RF_PATH_D].rfintfs = rFPGA0_XCD_RFInterfaceSW;/* 16 MSBs if read 32-bit from 0x874 (16-bit for 0x876) */ + + /* RF Interface Readback Value */ + pHalData->PHYRegDef[RF_PATH_A].rfintfi = rFPGA0_XAB_RFInterfaceRB; /* 16 LSBs if read 32-bit from 0x8E0 */ + pHalData->PHYRegDef[RF_PATH_B].rfintfi = rFPGA0_XAB_RFInterfaceRB;/* 16 MSBs if read 32-bit from 0x8E0 (16-bit for 0x8E2) */ + pHalData->PHYRegDef[RF_PATH_C].rfintfi = rFPGA0_XCD_RFInterfaceRB;/* 16 LSBs if read 32-bit from 0x8E4 */ + pHalData->PHYRegDef[RF_PATH_D].rfintfi = rFPGA0_XCD_RFInterfaceRB;/* 16 MSBs if read 32-bit from 0x8E4 (16-bit for 0x8E6) */ + + /* RF Interface Output (and Enable) */ + pHalData->PHYRegDef[RF_PATH_A].rfintfo = rFPGA0_XA_RFInterfaceOE; /* 16 LSBs if read 32-bit from 0x860 */ + pHalData->PHYRegDef[RF_PATH_B].rfintfo = rFPGA0_XB_RFInterfaceOE; /* 16 LSBs if read 32-bit from 0x864 */ + + /* RF Interface (Output and) Enable */ + pHalData->PHYRegDef[RF_PATH_A].rfintfe = rFPGA0_XA_RFInterfaceOE; /* 16 MSBs if read 32-bit from 0x860 (16-bit for 0x862) */ + pHalData->PHYRegDef[RF_PATH_B].rfintfe = rFPGA0_XB_RFInterfaceOE; /* 16 MSBs if read 32-bit from 0x864 (16-bit for 0x866) */ + + /* Addr of LSSI. Wirte RF register by driver */ + pHalData->PHYRegDef[RF_PATH_A].rf3wireOffset = rFPGA0_XA_LSSIParameter; /* LSSI Parameter */ + pHalData->PHYRegDef[RF_PATH_B].rf3wireOffset = rFPGA0_XB_LSSIParameter; + + /* RF parameter */ + pHalData->PHYRegDef[RF_PATH_A].rfLSSI_Select = rFPGA0_XAB_RFParameter; /* BB Band Select */ + pHalData->PHYRegDef[RF_PATH_B].rfLSSI_Select = rFPGA0_XAB_RFParameter; + pHalData->PHYRegDef[RF_PATH_C].rfLSSI_Select = rFPGA0_XCD_RFParameter; + pHalData->PHYRegDef[RF_PATH_D].rfLSSI_Select = rFPGA0_XCD_RFParameter; + + /* Tx AGC Gain Stage (same for all path. Should we remove this?) */ + pHalData->PHYRegDef[RF_PATH_A].rfTxGainStage = rFPGA0_TxGainStage; /* Tx gain stage */ + pHalData->PHYRegDef[RF_PATH_B].rfTxGainStage = rFPGA0_TxGainStage; /* Tx gain stage */ + pHalData->PHYRegDef[RF_PATH_C].rfTxGainStage = rFPGA0_TxGainStage; /* Tx gain stage */ + pHalData->PHYRegDef[RF_PATH_D].rfTxGainStage = rFPGA0_TxGainStage; /* Tx gain stage */ + + /* Tranceiver A~D HSSI Parameter-1 */ + pHalData->PHYRegDef[RF_PATH_A].rfHSSIPara1 = rFPGA0_XA_HSSIParameter1; /* wire control parameter1 */ + pHalData->PHYRegDef[RF_PATH_B].rfHSSIPara1 = rFPGA0_XB_HSSIParameter1; /* wire control parameter1 */ + + /* Tranceiver A~D HSSI Parameter-2 */ + pHalData->PHYRegDef[RF_PATH_A].rfHSSIPara2 = rFPGA0_XA_HSSIParameter2; /* wire control parameter2 */ + pHalData->PHYRegDef[RF_PATH_B].rfHSSIPara2 = rFPGA0_XB_HSSIParameter2; /* wire control parameter2 */ + + /* RF switch Control */ + pHalData->PHYRegDef[RF_PATH_A].rfSwitchControl = rFPGA0_XAB_SwitchControl; /* TR/Ant switch control */ + pHalData->PHYRegDef[RF_PATH_B].rfSwitchControl = rFPGA0_XAB_SwitchControl; + pHalData->PHYRegDef[RF_PATH_C].rfSwitchControl = rFPGA0_XCD_SwitchControl; + pHalData->PHYRegDef[RF_PATH_D].rfSwitchControl = rFPGA0_XCD_SwitchControl; + + /* AGC control 1 */ + pHalData->PHYRegDef[RF_PATH_A].rfAGCControl1 = rOFDM0_XAAGCCore1; + pHalData->PHYRegDef[RF_PATH_B].rfAGCControl1 = rOFDM0_XBAGCCore1; + pHalData->PHYRegDef[RF_PATH_C].rfAGCControl1 = rOFDM0_XCAGCCore1; + pHalData->PHYRegDef[RF_PATH_D].rfAGCControl1 = rOFDM0_XDAGCCore1; + + /* AGC control 2 */ + pHalData->PHYRegDef[RF_PATH_A].rfAGCControl2 = rOFDM0_XAAGCCore2; + pHalData->PHYRegDef[RF_PATH_B].rfAGCControl2 = rOFDM0_XBAGCCore2; + pHalData->PHYRegDef[RF_PATH_C].rfAGCControl2 = rOFDM0_XCAGCCore2; + pHalData->PHYRegDef[RF_PATH_D].rfAGCControl2 = rOFDM0_XDAGCCore2; + + /* RX AFE control 1 */ + pHalData->PHYRegDef[RF_PATH_A].rfRxIQImbalance = rOFDM0_XARxIQImbalance; + pHalData->PHYRegDef[RF_PATH_B].rfRxIQImbalance = rOFDM0_XBRxIQImbalance; + pHalData->PHYRegDef[RF_PATH_C].rfRxIQImbalance = rOFDM0_XCRxIQImbalance; + pHalData->PHYRegDef[RF_PATH_D].rfRxIQImbalance = rOFDM0_XDRxIQImbalance; + + /* RX AFE control 1 */ + pHalData->PHYRegDef[RF_PATH_A].rfRxAFE = rOFDM0_XARxAFE; + pHalData->PHYRegDef[RF_PATH_B].rfRxAFE = rOFDM0_XBRxAFE; + pHalData->PHYRegDef[RF_PATH_C].rfRxAFE = rOFDM0_XCRxAFE; + pHalData->PHYRegDef[RF_PATH_D].rfRxAFE = rOFDM0_XDRxAFE; + + /* Tx AFE control 1 */ + pHalData->PHYRegDef[RF_PATH_A].rfTxIQImbalance = rOFDM0_XATxIQImbalance; + pHalData->PHYRegDef[RF_PATH_B].rfTxIQImbalance = rOFDM0_XBTxIQImbalance; + pHalData->PHYRegDef[RF_PATH_C].rfTxIQImbalance = rOFDM0_XCTxIQImbalance; + pHalData->PHYRegDef[RF_PATH_D].rfTxIQImbalance = rOFDM0_XDTxIQImbalance; + + /* Tx AFE control 2 */ + pHalData->PHYRegDef[RF_PATH_A].rfTxAFE = rOFDM0_XATxAFE; + pHalData->PHYRegDef[RF_PATH_B].rfTxAFE = rOFDM0_XBTxAFE; + pHalData->PHYRegDef[RF_PATH_C].rfTxAFE = rOFDM0_XCTxAFE; + pHalData->PHYRegDef[RF_PATH_D].rfTxAFE = rOFDM0_XDTxAFE; + + /* Tranceiver LSSI Readback SI mode */ + pHalData->PHYRegDef[RF_PATH_A].rfLSSIReadBack = rFPGA0_XA_LSSIReadBack; + pHalData->PHYRegDef[RF_PATH_B].rfLSSIReadBack = rFPGA0_XB_LSSIReadBack; + pHalData->PHYRegDef[RF_PATH_C].rfLSSIReadBack = rFPGA0_XC_LSSIReadBack; + pHalData->PHYRegDef[RF_PATH_D].rfLSSIReadBack = rFPGA0_XD_LSSIReadBack; + + /* Tranceiver LSSI Readback PI mode */ + pHalData->PHYRegDef[RF_PATH_A].rfLSSIReadBackPi = TransceiverA_HSPI_Readback; + pHalData->PHYRegDef[RF_PATH_B].rfLSSIReadBackPi = TransceiverB_HSPI_Readback; +} + +void storePwrIndexDiffRateOffset(struct adapter *Adapter, u32 RegAddr, u32 BitMask, u32 Data) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter); + + if (RegAddr == rTxAGC_A_Rate18_06) + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][0] = Data; + if (RegAddr == rTxAGC_A_Rate54_24) + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][1] = Data; + if (RegAddr == rTxAGC_A_CCK1_Mcs32) + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][6] = Data; + if (RegAddr == rTxAGC_B_CCK11_A_CCK2_11 && BitMask == 0xffffff00) + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][7] = Data; + if (RegAddr == rTxAGC_A_Mcs03_Mcs00) + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][2] = Data; + if (RegAddr == rTxAGC_A_Mcs07_Mcs04) + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][3] = Data; + if (RegAddr == rTxAGC_A_Mcs11_Mcs08) + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][4] = Data; + if (RegAddr == rTxAGC_A_Mcs15_Mcs12) { + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][5] = Data; + if (pHalData->rf_type == RF_1T1R) + pHalData->pwrGroupCnt++; + } + if (RegAddr == rTxAGC_B_Rate18_06) + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][8] = Data; + if (RegAddr == rTxAGC_B_Rate54_24) + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][9] = Data; + if (RegAddr == rTxAGC_B_CCK1_55_Mcs32) + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][14] = Data; + if (RegAddr == rTxAGC_B_CCK11_A_CCK2_11 && BitMask == 0x000000ff) + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][15] = Data; + if (RegAddr == rTxAGC_B_Mcs03_Mcs00) + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][10] = Data; + if (RegAddr == rTxAGC_B_Mcs07_Mcs04) + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][11] = Data; + if (RegAddr == rTxAGC_B_Mcs11_Mcs08) + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][12] = Data; + if (RegAddr == rTxAGC_B_Mcs15_Mcs12) { + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][13] = Data; + if (pHalData->rf_type != RF_1T1R) + pHalData->pwrGroupCnt++; + } +} + +static int phy_BB8188E_Config_ParaFile(struct adapter *Adapter) +{ + struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(Adapter); + struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter); + int rtStatus = _SUCCESS; + + /* */ + /* 1. Read PHY_REG.TXT BB INIT!! */ + /* We will seperate as 88C / 92C according to chip version */ + /* */ + if (HAL_STATUS_FAILURE == ODM_ConfigBBWithHeaderFile(&pHalData->odmpriv, CONFIG_BB_PHY_REG)) + rtStatus = _FAIL; + if (rtStatus != _SUCCESS) + goto phy_BB8190_Config_ParaFile_Fail; + + /* 2. If EEPROM or EFUSE autoload OK, We must config by PHY_REG_PG.txt */ + if (!pEEPROM->bautoload_fail_flag) { + pHalData->pwrGroupCnt = 0; + + if (HAL_STATUS_FAILURE == ODM_ConfigBBWithHeaderFile(&pHalData->odmpriv, CONFIG_BB_PHY_REG_PG)) + rtStatus = _FAIL; + } + + if (rtStatus != _SUCCESS) + goto phy_BB8190_Config_ParaFile_Fail; + + /* 3. BB AGC table Initialization */ + if (HAL_STATUS_FAILURE == ODM_ConfigBBWithHeaderFile(&pHalData->odmpriv, CONFIG_BB_AGC_TAB)) + rtStatus = _FAIL; + + if (rtStatus != _SUCCESS) + goto phy_BB8190_Config_ParaFile_Fail; + +phy_BB8190_Config_ParaFile_Fail: + + return rtStatus; +} + +int +PHY_BBConfig8188E( + struct adapter *Adapter + ) +{ + int rtStatus = _SUCCESS; + struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter); + u32 RegVal; + u8 CrystalCap; + + phy_InitBBRFRegisterDefinition(Adapter); + + + /* Enable BB and RF */ + RegVal = rtw_read16(Adapter, REG_SYS_FUNC_EN); + rtw_write16(Adapter, REG_SYS_FUNC_EN, (u16)(RegVal|BIT13|BIT0|BIT1)); + + /* 20090923 Joseph: Advised by Steven and Jenyu. Power sequence before init RF. */ + + rtw_write8(Adapter, REG_RF_CTRL, RF_EN|RF_RSTB|RF_SDMRSTB); + + rtw_write8(Adapter, REG_SYS_FUNC_EN, FEN_USBA | FEN_USBD | FEN_BB_GLB_RSTn | FEN_BBRSTB); + + /* Config BB and AGC */ + rtStatus = phy_BB8188E_Config_ParaFile(Adapter); + + /* write 0x24[16:11] = 0x24[22:17] = CrystalCap */ + CrystalCap = pHalData->CrystalCap & 0x3F; + PHY_SetBBReg(Adapter, REG_AFE_XTAL_CTRL, 0x7ff800, (CrystalCap | (CrystalCap << 6))); + + return rtStatus; +} + +int PHY_RFConfig8188E(struct adapter *Adapter) +{ + int rtStatus = _SUCCESS; + + /* RF config */ + rtStatus = PHY_RF6052_Config8188E(Adapter); + return rtStatus; +} + + +/*----------------------------------------------------------------------------- + * Function: PHY_ConfigRFWithParaFile() + * + * Overview: This function read RF parameters from general file format, and do RF 3-wire + * + * Input: struct adapter *Adapter + * ps8 pFileName + * enum rf_radio_path eRFPath + * + * Output: NONE + * + * Return: RT_STATUS_SUCCESS: configuration file exist + * + * Note: Delay may be required for RF configuration + *---------------------------------------------------------------------------*/ +int rtl8188e_PHY_ConfigRFWithParaFile(struct adapter *Adapter, u8 *pFileName, enum rf_radio_path eRFPath) +{ + return _SUCCESS; +} + +void +rtl8192c_PHY_GetHWRegOriginalValue( + struct adapter *Adapter + ) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter); + + /* read rx initial gain */ + pHalData->DefaultInitialGain[0] = (u8)PHY_QueryBBReg(Adapter, rOFDM0_XAAGCCore1, bMaskByte0); + pHalData->DefaultInitialGain[1] = (u8)PHY_QueryBBReg(Adapter, rOFDM0_XBAGCCore1, bMaskByte0); + pHalData->DefaultInitialGain[2] = (u8)PHY_QueryBBReg(Adapter, rOFDM0_XCAGCCore1, bMaskByte0); + pHalData->DefaultInitialGain[3] = (u8)PHY_QueryBBReg(Adapter, rOFDM0_XDAGCCore1, bMaskByte0); + + /* read framesync */ + pHalData->framesync = (u8)PHY_QueryBBReg(Adapter, rOFDM0_RxDetector3, bMaskByte0); + pHalData->framesyncC34 = PHY_QueryBBReg(Adapter, rOFDM0_RxDetector2, bMaskDWord); +} + +/* */ +/* Description: */ +/* Map dBm into Tx power index according to */ +/* current HW model, for example, RF and PA, and */ +/* current wireless mode. */ +/* By Bruce, 2008-01-29. */ +/* */ +static u8 phy_DbmToTxPwrIdx(struct adapter *Adapter, enum wireless_mode WirelessMode, int PowerInDbm) +{ + u8 TxPwrIdx = 0; + int Offset = 0; + + + /* */ + /* Tested by MP, we found that CCK Index 0 equals to 8dbm, OFDM legacy equals to */ + /* 3dbm, and OFDM HT equals to 0dbm repectively. */ + /* Note: */ + /* The mapping may be different by different NICs. Do not use this formula for what needs accurate result. */ + /* By Bruce, 2008-01-29. */ + /* */ + switch (WirelessMode) { + case WIRELESS_MODE_B: + Offset = -7; + break; + + case WIRELESS_MODE_G: + case WIRELESS_MODE_N_24G: + default: + Offset = -8; + break; + } + + if ((PowerInDbm - Offset) > 0) + TxPwrIdx = (u8)((PowerInDbm - Offset) * 2); + else + TxPwrIdx = 0; + + /* Tx Power Index is too large. */ + if (TxPwrIdx > MAX_TXPWR_IDX_NMODE_92S) + TxPwrIdx = MAX_TXPWR_IDX_NMODE_92S; + + return TxPwrIdx; +} + +/* */ +/* Description: */ +/* Map Tx power index into dBm according to */ +/* current HW model, for example, RF and PA, and */ +/* current wireless mode. */ +/* By Bruce, 2008-01-29. */ +/* */ +static int phy_TxPwrIdxToDbm(struct adapter *Adapter, enum wireless_mode WirelessMode, u8 TxPwrIdx) +{ + int Offset = 0; + int PwrOutDbm = 0; + + /* */ + /* Tested by MP, we found that CCK Index 0 equals to -7dbm, OFDM legacy equals to -8dbm. */ + /* Note: */ + /* The mapping may be different by different NICs. Do not use this formula for what needs accurate result. */ + /* By Bruce, 2008-01-29. */ + /* */ + switch (WirelessMode) { + case WIRELESS_MODE_B: + Offset = -7; + break; + case WIRELESS_MODE_G: + case WIRELESS_MODE_N_24G: + default: + Offset = -8; + break; + } + + PwrOutDbm = TxPwrIdx / 2 + Offset; /* Discard the decimal part. */ + + return PwrOutDbm; +} + + +/*----------------------------------------------------------------------------- + * Function: GetTxPowerLevel8190() + * + * Overview: This function is export to "common" moudule + * + * Input: struct adapter *Adapter + * psByte Power Level + * + * Output: NONE + * + * Return: NONE + * + *---------------------------------------------------------------------------*/ +void PHY_GetTxPowerLevel8188E(struct adapter *Adapter, u32 *powerlevel) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter); + u8 TxPwrLevel = 0; + int TxPwrDbm; + + /* */ + /* Because the Tx power indexes are different, we report the maximum of them to */ + /* meet the CCX TPC request. By Bruce, 2008-01-31. */ + /* */ + + /* CCK */ + TxPwrLevel = pHalData->CurrentCckTxPwrIdx; + TxPwrDbm = phy_TxPwrIdxToDbm(Adapter, WIRELESS_MODE_B, TxPwrLevel); + + /* Legacy OFDM */ + TxPwrLevel = pHalData->CurrentOfdm24GTxPwrIdx + pHalData->LegacyHTTxPowerDiff; + + /* Compare with Legacy OFDM Tx power. */ + if (phy_TxPwrIdxToDbm(Adapter, WIRELESS_MODE_G, TxPwrLevel) > TxPwrDbm) + TxPwrDbm = phy_TxPwrIdxToDbm(Adapter, WIRELESS_MODE_G, TxPwrLevel); + + /* HT OFDM */ + TxPwrLevel = pHalData->CurrentOfdm24GTxPwrIdx; + + /* Compare with HT OFDM Tx power. */ + if (phy_TxPwrIdxToDbm(Adapter, WIRELESS_MODE_N_24G, TxPwrLevel) > TxPwrDbm) + TxPwrDbm = phy_TxPwrIdxToDbm(Adapter, WIRELESS_MODE_N_24G, TxPwrLevel); + + *powerlevel = TxPwrDbm; +} + +static void getTxPowerIndex88E(struct adapter *Adapter, u8 channel, u8 *cckPowerLevel, + u8 *ofdmPowerLevel, u8 *BW20PowerLevel, + u8 *BW40PowerLevel) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter); + u8 index = (channel - 1); + u8 TxCount = 0, path_nums; + + if ((RF_1T2R == pHalData->rf_type) || (RF_1T1R == pHalData->rf_type)) + path_nums = 1; + else + path_nums = 2; + + for (TxCount = 0; TxCount < path_nums; TxCount++) { + if (TxCount == RF_PATH_A) { + /* 1. CCK */ + cckPowerLevel[TxCount] = pHalData->Index24G_CCK_Base[TxCount][index]; + /* 2. OFDM */ + ofdmPowerLevel[TxCount] = pHalData->Index24G_BW40_Base[RF_PATH_A][index]+ + pHalData->OFDM_24G_Diff[TxCount][RF_PATH_A]; + /* 1. BW20 */ + BW20PowerLevel[TxCount] = pHalData->Index24G_BW40_Base[RF_PATH_A][index]+ + pHalData->BW20_24G_Diff[TxCount][RF_PATH_A]; + /* 2. BW40 */ + BW40PowerLevel[TxCount] = pHalData->Index24G_BW40_Base[TxCount][index]; + } else if (TxCount == RF_PATH_B) { + /* 1. CCK */ + cckPowerLevel[TxCount] = pHalData->Index24G_CCK_Base[TxCount][index]; + /* 2. OFDM */ + ofdmPowerLevel[TxCount] = pHalData->Index24G_BW40_Base[RF_PATH_A][index]+ + pHalData->BW20_24G_Diff[RF_PATH_A][index]+ + pHalData->BW20_24G_Diff[TxCount][index]; + /* 1. BW20 */ + BW20PowerLevel[TxCount] = pHalData->Index24G_BW40_Base[RF_PATH_A][index]+ + pHalData->BW20_24G_Diff[TxCount][RF_PATH_A]+ + pHalData->BW20_24G_Diff[TxCount][index]; + /* 2. BW40 */ + BW40PowerLevel[TxCount] = pHalData->Index24G_BW40_Base[TxCount][index]; + } else if (TxCount == RF_PATH_C) { + /* 1. CCK */ + cckPowerLevel[TxCount] = pHalData->Index24G_CCK_Base[TxCount][index]; + /* 2. OFDM */ + ofdmPowerLevel[TxCount] = pHalData->Index24G_BW40_Base[RF_PATH_A][index]+ + pHalData->BW20_24G_Diff[RF_PATH_A][index]+ + pHalData->BW20_24G_Diff[RF_PATH_B][index]+ + pHalData->BW20_24G_Diff[TxCount][index]; + /* 1. BW20 */ + BW20PowerLevel[TxCount] = pHalData->Index24G_BW40_Base[RF_PATH_A][index]+ + pHalData->BW20_24G_Diff[RF_PATH_A][index]+ + pHalData->BW20_24G_Diff[RF_PATH_B][index]+ + pHalData->BW20_24G_Diff[TxCount][index]; + /* 2. BW40 */ + BW40PowerLevel[TxCount] = pHalData->Index24G_BW40_Base[TxCount][index]; + } else if (TxCount == RF_PATH_D) { + /* 1. CCK */ + cckPowerLevel[TxCount] = pHalData->Index24G_CCK_Base[TxCount][index]; + /* 2. OFDM */ + ofdmPowerLevel[TxCount] = pHalData->Index24G_BW40_Base[RF_PATH_A][index]+ + pHalData->BW20_24G_Diff[RF_PATH_A][index]+ + pHalData->BW20_24G_Diff[RF_PATH_B][index]+ + pHalData->BW20_24G_Diff[RF_PATH_C][index]+ + pHalData->BW20_24G_Diff[TxCount][index]; + + /* 1. BW20 */ + BW20PowerLevel[TxCount] = pHalData->Index24G_BW40_Base[RF_PATH_A][index]+ + pHalData->BW20_24G_Diff[RF_PATH_A][index]+ + pHalData->BW20_24G_Diff[RF_PATH_B][index]+ + pHalData->BW20_24G_Diff[RF_PATH_C][index]+ + pHalData->BW20_24G_Diff[TxCount][index]; + + /* 2. BW40 */ + BW40PowerLevel[TxCount] = pHalData->Index24G_BW40_Base[TxCount][index]; + } + } +} + +static void phy_PowerIndexCheck88E(struct adapter *Adapter, u8 channel, u8 *cckPowerLevel, + u8 *ofdmPowerLevel, u8 *BW20PowerLevel, u8 *BW40PowerLevel) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter); + + pHalData->CurrentCckTxPwrIdx = cckPowerLevel[0]; + pHalData->CurrentOfdm24GTxPwrIdx = ofdmPowerLevel[0]; + pHalData->CurrentBW2024GTxPwrIdx = BW20PowerLevel[0]; + pHalData->CurrentBW4024GTxPwrIdx = BW40PowerLevel[0]; +} + +/*----------------------------------------------------------------------------- + * Function: SetTxPowerLevel8190() + * + * Overview: This function is export to "HalCommon" moudule + * We must consider RF path later!!!!!!! + * + * Input: struct adapter *Adapter + * u8 channel + * + * Output: NONE + * + * Return: NONE + * 2008/11/04 MHC We remove EEPROM_93C56. + * We need to move CCX relative code to independet file. + * 2009/01/21 MHC Support new EEPROM format from SD3 requirement. + * + *---------------------------------------------------------------------------*/ +void +PHY_SetTxPowerLevel8188E( + struct adapter *Adapter, + u8 channel + ) +{ + u8 cckPowerLevel[MAX_TX_COUNT] = {0}; + u8 ofdmPowerLevel[MAX_TX_COUNT] = {0};/* [0]:RF-A, [1]:RF-B */ + u8 BW20PowerLevel[MAX_TX_COUNT] = {0}; + u8 BW40PowerLevel[MAX_TX_COUNT] = {0}; + + getTxPowerIndex88E(Adapter, channel, &cckPowerLevel[0], &ofdmPowerLevel[0], &BW20PowerLevel[0], &BW40PowerLevel[0]); + + phy_PowerIndexCheck88E(Adapter, channel, &cckPowerLevel[0], &ofdmPowerLevel[0], &BW20PowerLevel[0], &BW40PowerLevel[0]); + + rtl8188e_PHY_RF6052SetCckTxPower(Adapter, &cckPowerLevel[0]); + rtl8188e_PHY_RF6052SetOFDMTxPower(Adapter, &ofdmPowerLevel[0], &BW20PowerLevel[0], &BW40PowerLevel[0], channel); +} + +/* */ +/* Description: */ +/* Update transmit power level of all channel supported. */ +/* */ +/* TODO: */ +/* A mode. */ +/* By Bruce, 2008-02-04. */ +/* */ +bool +PHY_UpdateTxPowerDbm8188E( + struct adapter *Adapter, + int powerInDbm + ) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter); + u8 idx; + u8 rf_path; + + /* TODO: A mode Tx power. */ + u8 CckTxPwrIdx = phy_DbmToTxPwrIdx(Adapter, WIRELESS_MODE_B, powerInDbm); + u8 OfdmTxPwrIdx = phy_DbmToTxPwrIdx(Adapter, WIRELESS_MODE_N_24G, powerInDbm); + + if (OfdmTxPwrIdx - pHalData->LegacyHTTxPowerDiff > 0) + OfdmTxPwrIdx -= pHalData->LegacyHTTxPowerDiff; + else + OfdmTxPwrIdx = 0; + + for (idx = 0; idx < 14; idx++) { + for (rf_path = 0; rf_path < 2; rf_path++) { + pHalData->TxPwrLevelCck[rf_path][idx] = CckTxPwrIdx; + pHalData->TxPwrLevelHT40_1S[rf_path][idx] = + pHalData->TxPwrLevelHT40_2S[rf_path][idx] = OfdmTxPwrIdx; + } + } + return true; +} + +void +PHY_ScanOperationBackup8188E( + struct adapter *Adapter, + u8 Operation + ) +{ +} + +/*----------------------------------------------------------------------------- + * Function: PHY_SetBWModeCallback8192C() + * + * Overview: Timer callback function for SetSetBWMode + * + * Input: PRT_TIMER pTimer + * + * Output: NONE + * + * Return: NONE + * + * Note: (1) We do not take j mode into consideration now + * (2) Will two workitem of "switch channel" and "switch channel bandwidth" run + * concurrently? + *---------------------------------------------------------------------------*/ +static void +_PHY_SetBWMode92C( + struct adapter *Adapter +) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter); + u8 regBwOpMode; + u8 regRRSR_RSC; + + if (pHalData->rf_chip == RF_PSEUDO_11N) + return; + + /* There is no 40MHz mode in RF_8225. */ + if (pHalData->rf_chip == RF_8225) + return; + + if (Adapter->bDriverStopped) + return; + + /* 3 */ + /* 3<1>Set MAC register */ + /* 3 */ + + regBwOpMode = rtw_read8(Adapter, REG_BWOPMODE); + regRRSR_RSC = rtw_read8(Adapter, REG_RRSR+2); + + switch (pHalData->CurrentChannelBW) { + case HT_CHANNEL_WIDTH_20: + regBwOpMode |= BW_OPMODE_20MHZ; + /* 2007/02/07 Mark by Emily becasue we have not verify whether this register works */ + rtw_write8(Adapter, REG_BWOPMODE, regBwOpMode); + break; + case HT_CHANNEL_WIDTH_40: + regBwOpMode &= ~BW_OPMODE_20MHZ; + /* 2007/02/07 Mark by Emily becasue we have not verify whether this register works */ + rtw_write8(Adapter, REG_BWOPMODE, regBwOpMode); + regRRSR_RSC = (regRRSR_RSC&0x90) | (pHalData->nCur40MhzPrimeSC<<5); + rtw_write8(Adapter, REG_RRSR+2, regRRSR_RSC); + break; + default: + break; + } + + /* 3 */ + /* 3 <2>Set PHY related register */ + /* 3 */ + switch (pHalData->CurrentChannelBW) { + /* 20 MHz channel*/ + case HT_CHANNEL_WIDTH_20: + PHY_SetBBReg(Adapter, rFPGA0_RFMOD, bRFMOD, 0x0); + PHY_SetBBReg(Adapter, rFPGA1_RFMOD, bRFMOD, 0x0); + break; + /* 40 MHz channel*/ + case HT_CHANNEL_WIDTH_40: + PHY_SetBBReg(Adapter, rFPGA0_RFMOD, bRFMOD, 0x1); + PHY_SetBBReg(Adapter, rFPGA1_RFMOD, bRFMOD, 0x1); + /* Set Control channel to upper or lower. These settings are required only for 40MHz */ + PHY_SetBBReg(Adapter, rCCK0_System, bCCKSideBand, (pHalData->nCur40MhzPrimeSC>>1)); + PHY_SetBBReg(Adapter, rOFDM1_LSTF, 0xC00, pHalData->nCur40MhzPrimeSC); + PHY_SetBBReg(Adapter, 0x818, (BIT26 | BIT27), + (pHalData->nCur40MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1); + break; + default: + break; + } + /* Skip over setting of J-mode in BB register here. Default value is "None J mode". Emily 20070315 */ + + /* 3<3>Set RF related register */ + switch (pHalData->rf_chip) { + case RF_8225: + break; + case RF_8256: + /* Please implement this function in Hal8190PciPhy8256.c */ + break; + case RF_8258: + /* Please implement this function in Hal8190PciPhy8258.c */ + break; + case RF_PSEUDO_11N: + break; + case RF_6052: + rtl8188e_PHY_RF6052SetBandwidth(Adapter, pHalData->CurrentChannelBW); + break; + default: + break; + } +} + + /*----------------------------------------------------------------------------- + * Function: SetBWMode8190Pci() + * + * Overview: This function is export to "HalCommon" moudule + * + * Input: struct adapter *Adapter + * enum ht_channel_width Bandwidth 20M or 40M + * + * Output: NONE + * + * Return: NONE + * + * Note: We do not take j mode into consideration now + *---------------------------------------------------------------------------*/ +void PHY_SetBWMode8188E(struct adapter *Adapter, enum ht_channel_width Bandwidth, /* 20M or 40M */ + unsigned char Offset) /* Upper, Lower, or Don't care */ +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter); + enum ht_channel_width tmpBW = pHalData->CurrentChannelBW; + + pHalData->CurrentChannelBW = Bandwidth; + + pHalData->nCur40MhzPrimeSC = Offset; + + if ((!Adapter->bDriverStopped) && (!Adapter->bSurpriseRemoved)) + _PHY_SetBWMode92C(Adapter); + else + pHalData->CurrentChannelBW = tmpBW; +} + +static void _PHY_SwChnl8192C(struct adapter *Adapter, u8 channel) +{ + u8 eRFPath; + u32 param1, param2; + struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter); + + if (Adapter->bNotifyChannelChange) + DBG_88E("[%s] ch = %d\n", __func__, channel); + + /* s1. pre common command - CmdID_SetTxPowerLevel */ + PHY_SetTxPowerLevel8188E(Adapter, channel); + + /* s2. RF dependent command - CmdID_RF_WriteReg, param1=RF_CHNLBW, param2=channel */ + param1 = RF_CHNLBW; + param2 = channel; + for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++) { + pHalData->RfRegChnlVal[eRFPath] = ((pHalData->RfRegChnlVal[eRFPath] & 0xfffffc00) | param2); + PHY_SetRFReg(Adapter, (enum rf_radio_path)eRFPath, param1, bRFRegOffsetMask, pHalData->RfRegChnlVal[eRFPath]); + } +} + +void PHY_SwChnl8188E(struct adapter *Adapter, u8 channel) +{ + /* Call after initialization */ + struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter); + u8 tmpchannel = pHalData->CurrentChannel; + bool bResult = true; + + if (pHalData->rf_chip == RF_PSEUDO_11N) + return; /* return immediately if it is peudo-phy */ + + if (channel == 0) + channel = 1; + + pHalData->CurrentChannel = channel; + + if ((!Adapter->bDriverStopped) && (!Adapter->bSurpriseRemoved)) { + _PHY_SwChnl8192C(Adapter, channel); + + if (bResult) + ; + else + pHalData->CurrentChannel = tmpchannel; + + } else { + pHalData->CurrentChannel = tmpchannel; + } +} diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_rf6052.c b/drivers/staging/rtl8188eu/hal/rtl8188e_rf6052.c new file mode 100644 index 0000000..bfdf9b3 --- /dev/null +++ b/drivers/staging/rtl8188eu/hal/rtl8188e_rf6052.c @@ -0,0 +1,572 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * + ******************************************************************************/ +/****************************************************************************** + * + * + * Module: rtl8192c_rf6052.c ( Source C File) + * + * Note: Provide RF 6052 series relative API. + * + * Function: + * + * Export: + * + * Abbrev: + * + * History: + * Data Who Remark + * + * 09/25/2008 MHC Create initial version. + * 11/05/2008 MHC Add API for tw power setting. + * + * +******************************************************************************/ + +#define _RTL8188E_RF6052_C_ + +#include +#include + +#include + +/*---------------------------Define Local Constant---------------------------*/ +/* Define local structure for debug!!!!! */ +struct rf_shadow { + /* Shadow register value */ + u32 Value; + /* Compare or not flag */ + u8 Compare; + /* Record If it had ever modified unpredicted */ + u8 ErrorOrNot; + /* Recorver Flag */ + u8 Recorver; + /* */ + u8 Driver_Write; +}; + +/*---------------------------Define Local Constant---------------------------*/ + + +/*------------------------Define global variable-----------------------------*/ + +/*------------------------Define local variable------------------------------*/ + +/*----------------------------------------------------------------------------- + * Function: RF_ChangeTxPath + * + * Overview: For RL6052, we must change some RF settign for 1T or 2T. + * + * Input: u16 DataRate 0x80-8f, 0x90-9f + * + * Output: NONE + * + * Return: NONE + * + * Revised History: + * When Who Remark + * 09/25/2008 MHC Create Version 0. + * Firmwaer support the utility later. + * + *---------------------------------------------------------------------------*/ +void rtl8188e_RF_ChangeTxPath(struct adapter *Adapter, u16 DataRate) +{ +/* We do not support gain table change inACUT now !!!! Delete later !!! */ +} /* RF_ChangeTxPath */ + + +/*----------------------------------------------------------------------------- + * Function: PHY_RF6052SetBandwidth() + * + * Overview: This function is called by SetBWModeCallback8190Pci() only + * + * Input: struct adapter *Adapter + * WIRELESS_BANDWIDTH_E Bandwidth 20M or 40M + * + * Output: NONE + * + * Return: NONE + * + * Note: For RF type 0222D + *---------------------------------------------------------------------------*/ +void rtl8188e_PHY_RF6052SetBandwidth(struct adapter *Adapter, + enum ht_channel_width Bandwidth) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter); + + switch (Bandwidth) { + case HT_CHANNEL_WIDTH_20: + pHalData->RfRegChnlVal[0] = ((pHalData->RfRegChnlVal[0] & 0xfffff3ff) | BIT(10) | BIT(11)); + PHY_SetRFReg(Adapter, RF_PATH_A, RF_CHNLBW, bRFRegOffsetMask, pHalData->RfRegChnlVal[0]); + break; + case HT_CHANNEL_WIDTH_40: + pHalData->RfRegChnlVal[0] = ((pHalData->RfRegChnlVal[0] & 0xfffff3ff) | BIT(10)); + PHY_SetRFReg(Adapter, RF_PATH_A, RF_CHNLBW, bRFRegOffsetMask, pHalData->RfRegChnlVal[0]); + break; + default: + break; + } +} + +/*----------------------------------------------------------------------------- + * Function: PHY_RF6052SetCckTxPower + * + * Overview: + * + * Input: NONE + * + * Output: NONE + * + * Return: NONE + * + * Revised History: + * When Who Remark + * 11/05/2008 MHC Simulate 8192series.. + * + *---------------------------------------------------------------------------*/ + +void +rtl8188e_PHY_RF6052SetCckTxPower( + struct adapter *Adapter, + u8 *pPowerlevel) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter); + struct dm_priv *pdmpriv = &pHalData->dmpriv; + struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv; + u32 TxAGC[2] = {0, 0}, tmpval = 0, pwrtrac_value; + bool TurboScanOff = false; + u8 idx1, idx2; + u8 *ptr; + u8 direction; + /* FOR CE ,must disable turbo scan */ + TurboScanOff = true; + + + if (pmlmeext->sitesurvey_res.state == SCAN_PROCESS) { + TxAGC[RF_PATH_A] = 0x3f3f3f3f; + TxAGC[RF_PATH_B] = 0x3f3f3f3f; + + TurboScanOff = true;/* disable turbo scan */ + + if (TurboScanOff) { + for (idx1 = RF_PATH_A; idx1 <= RF_PATH_B; idx1++) { + TxAGC[idx1] = + pPowerlevel[idx1] | (pPowerlevel[idx1]<<8) | + (pPowerlevel[idx1]<<16) | (pPowerlevel[idx1]<<24); + /* 2010/10/18 MH For external PA module. We need to limit power index to be less than 0x20. */ + if (TxAGC[idx1] > 0x20 && pHalData->ExternalPA) + TxAGC[idx1] = 0x20; + } + } + } else { + /* Driver dynamic Tx power shall not affect Tx power. + * It shall be determined by power training mechanism. +i * Currently, we cannot fully disable driver dynamic + * tx power mechanism because it is referenced by BT + * coexist mechanism. + * In the future, two mechanism shall be separated from + * each other and maintained independantly. */ + if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1) { + TxAGC[RF_PATH_A] = 0x10101010; + TxAGC[RF_PATH_B] = 0x10101010; + } else if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level2) { + TxAGC[RF_PATH_A] = 0x00000000; + TxAGC[RF_PATH_B] = 0x00000000; + } else { + for (idx1 = RF_PATH_A; idx1 <= RF_PATH_B; idx1++) { + TxAGC[idx1] = + pPowerlevel[idx1] | (pPowerlevel[idx1]<<8) | + (pPowerlevel[idx1]<<16) | (pPowerlevel[idx1]<<24); + } + if (pHalData->EEPROMRegulatory == 0) { + tmpval = (pHalData->MCSTxPowerLevelOriginalOffset[0][6]) + + (pHalData->MCSTxPowerLevelOriginalOffset[0][7]<<8); + TxAGC[RF_PATH_A] += tmpval; + + tmpval = (pHalData->MCSTxPowerLevelOriginalOffset[0][14]) + + (pHalData->MCSTxPowerLevelOriginalOffset[0][15]<<24); + TxAGC[RF_PATH_B] += tmpval; + } + } + } + for (idx1 = RF_PATH_A; idx1 <= RF_PATH_B; idx1++) { + ptr = (u8 *)(&(TxAGC[idx1])); + for (idx2 = 0; idx2 < 4; idx2++) { + if (*ptr > RF6052_MAX_TX_PWR) + *ptr = RF6052_MAX_TX_PWR; + ptr++; + } + } + ODM_TxPwrTrackAdjust88E(&pHalData->odmpriv, 1, &direction, &pwrtrac_value); + + if (direction == 1) { + /* Increase TX pwoer */ + TxAGC[0] += pwrtrac_value; + TxAGC[1] += pwrtrac_value; + } else if (direction == 2) { + /* Decrease TX pwoer */ + TxAGC[0] -= pwrtrac_value; + TxAGC[1] -= pwrtrac_value; + } + + /* rf-A cck tx power */ + tmpval = TxAGC[RF_PATH_A]&0xff; + PHY_SetBBReg(Adapter, rTxAGC_A_CCK1_Mcs32, bMaskByte1, tmpval); + tmpval = TxAGC[RF_PATH_A]>>8; + PHY_SetBBReg(Adapter, rTxAGC_B_CCK11_A_CCK2_11, 0xffffff00, tmpval); + + /* rf-B cck tx power */ + tmpval = TxAGC[RF_PATH_B]>>24; + PHY_SetBBReg(Adapter, rTxAGC_B_CCK11_A_CCK2_11, bMaskByte0, tmpval); + tmpval = TxAGC[RF_PATH_B]&0x00ffffff; + PHY_SetBBReg(Adapter, rTxAGC_B_CCK1_55_Mcs32, 0xffffff00, tmpval); +} /* PHY_RF6052SetCckTxPower */ + +/* */ +/* powerbase0 for OFDM rates */ +/* powerbase1 for HT MCS rates */ +/* */ +static void getpowerbase88e(struct adapter *Adapter, u8 *pPowerLevelOFDM, + u8 *pPowerLevelBW20, u8 *pPowerLevelBW40, u8 Channel, u32 *OfdmBase, u32 *MCSBase) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter); + u32 powerBase0, powerBase1; + u8 i, powerlevel[2]; + + for (i = 0; i < 2; i++) { + powerBase0 = pPowerLevelOFDM[i]; + + powerBase0 = (powerBase0<<24) | (powerBase0<<16) | (powerBase0<<8) | powerBase0; + *(OfdmBase+i) = powerBase0; + } + for (i = 0; i < pHalData->NumTotalRFPath; i++) { + /* Check HT20 to HT40 diff */ + if (pHalData->CurrentChannelBW == HT_CHANNEL_WIDTH_20) + powerlevel[i] = pPowerLevelBW20[i]; + else + powerlevel[i] = pPowerLevelBW40[i]; + powerBase1 = powerlevel[i]; + powerBase1 = (powerBase1<<24) | (powerBase1<<16) | (powerBase1<<8) | powerBase1; + *(MCSBase+i) = powerBase1; + } +} +static void get_rx_power_val_by_reg(struct adapter *Adapter, u8 Channel, + u8 index, u32 *powerBase0, u32 *powerBase1, + u32 *pOutWriteVal) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter); + struct dm_priv *pdmpriv = &pHalData->dmpriv; + u8 i, chnlGroup = 0, pwr_diff_limit[4], customer_pwr_limit; + s8 pwr_diff = 0; + u32 writeVal, customer_limit, rf; + u8 Regulatory = pHalData->EEPROMRegulatory; + + /* Index 0 & 1= legacy OFDM, 2-5=HT_MCS rate */ + + for (rf = 0; rf < 2; rf++) { + switch (Regulatory) { + case 0: /* Realtek better performance */ + /* increase power diff defined by Realtek for large power */ + chnlGroup = 0; + writeVal = pHalData->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf ? 8 : 0)] + + ((index < 2) ? powerBase0[rf] : powerBase1[rf]); + break; + case 1: /* Realtek regulatory */ + /* increase power diff defined by Realtek for regulatory */ + if (pHalData->pwrGroupCnt == 1) + chnlGroup = 0; + if (pHalData->pwrGroupCnt >= pHalData->PGMaxGroup) { + if (Channel < 3) /* Chanel 1-2 */ + chnlGroup = 0; + else if (Channel < 6) /* Channel 3-5 */ + chnlGroup = 1; + else if (Channel < 9) /* Channel 6-8 */ + chnlGroup = 2; + else if (Channel < 12) /* Channel 9-11 */ + chnlGroup = 3; + else if (Channel < 14) /* Channel 12-13 */ + chnlGroup = 4; + else if (Channel == 14) /* Channel 14 */ + chnlGroup = 5; + } + writeVal = pHalData->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf ? 8 : 0)] + + ((index < 2) ? powerBase0[rf] : powerBase1[rf]); + break; + case 2: /* Better regulatory */ + /* don't increase any power diff */ + writeVal = ((index < 2) ? powerBase0[rf] : powerBase1[rf]); + break; + case 3: /* Customer defined power diff. */ + /* increase power diff defined by customer. */ + chnlGroup = 0; + + if (index < 2) + pwr_diff = pHalData->TxPwrLegacyHtDiff[rf][Channel-1]; + else if (pHalData->CurrentChannelBW == HT_CHANNEL_WIDTH_20) + pwr_diff = pHalData->TxPwrHt20Diff[rf][Channel-1]; + + if (pHalData->CurrentChannelBW == HT_CHANNEL_WIDTH_40) + customer_pwr_limit = pHalData->PwrGroupHT40[rf][Channel-1]; + else + customer_pwr_limit = pHalData->PwrGroupHT20[rf][Channel-1]; + + if (pwr_diff >= customer_pwr_limit) + pwr_diff = 0; + else + pwr_diff = customer_pwr_limit - pwr_diff; + + for (i = 0; i < 4; i++) { + pwr_diff_limit[i] = (u8)((pHalData->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf ? 8 : 0)]&(0x7f<<(i*8)))>>(i*8)); + + if (pwr_diff_limit[i] > pwr_diff) + pwr_diff_limit[i] = pwr_diff; + } + customer_limit = (pwr_diff_limit[3]<<24) | (pwr_diff_limit[2]<<16) | + (pwr_diff_limit[1]<<8) | (pwr_diff_limit[0]); + writeVal = customer_limit + ((index < 2) ? powerBase0[rf] : powerBase1[rf]); + break; + default: + chnlGroup = 0; + writeVal = pHalData->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf ? 8 : 0)] + + ((index < 2) ? powerBase0[rf] : powerBase1[rf]); + break; + } +/* 20100427 Joseph: Driver dynamic Tx power shall not affect Tx power. It shall be determined by power training mechanism. */ +/* Currently, we cannot fully disable driver dynamic tx power mechanism because it is referenced by BT coexist mechanism. */ +/* In the future, two mechanism shall be separated from each other and maintained independantly. Thanks for Lanhsin's reminder. */ + /* 92d do not need this */ + if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1) + writeVal = 0x14141414; + else if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level2) + writeVal = 0x00000000; + + /* 20100628 Joseph: High power mode for BT-Coexist mechanism. */ + /* This mechanism is only applied when Driver-Highpower-Mechanism is OFF. */ + if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_BT1) + writeVal = writeVal - 0x06060606; + else if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_BT2) + writeVal = writeVal; + *(pOutWriteVal+rf) = writeVal; + } +} +static void writeOFDMPowerReg88E(struct adapter *Adapter, u8 index, u32 *pValue) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter); + u16 regoffset_a[6] = { + rTxAGC_A_Rate18_06, rTxAGC_A_Rate54_24, + rTxAGC_A_Mcs03_Mcs00, rTxAGC_A_Mcs07_Mcs04, + rTxAGC_A_Mcs11_Mcs08, rTxAGC_A_Mcs15_Mcs12}; + u16 regoffset_b[6] = { + rTxAGC_B_Rate18_06, rTxAGC_B_Rate54_24, + rTxAGC_B_Mcs03_Mcs00, rTxAGC_B_Mcs07_Mcs04, + rTxAGC_B_Mcs11_Mcs08, rTxAGC_B_Mcs15_Mcs12}; + u8 i, rf, pwr_val[4]; + u32 writeVal; + u16 regoffset; + + for (rf = 0; rf < 2; rf++) { + writeVal = pValue[rf]; + for (i = 0; i < 4; i++) { + pwr_val[i] = (u8)((writeVal & (0x7f<<(i*8)))>>(i*8)); + if (pwr_val[i] > RF6052_MAX_TX_PWR) + pwr_val[i] = RF6052_MAX_TX_PWR; + } + writeVal = (pwr_val[3]<<24) | (pwr_val[2]<<16) | (pwr_val[1]<<8) | pwr_val[0]; + + if (rf == 0) + regoffset = regoffset_a[index]; + else + regoffset = regoffset_b[index]; + + PHY_SetBBReg(Adapter, regoffset, bMaskDWord, writeVal); + + /* 201005115 Joseph: Set Tx Power diff for Tx power training mechanism. */ + if (((pHalData->rf_type == RF_2T2R) && + (regoffset == rTxAGC_A_Mcs15_Mcs12 || regoffset == rTxAGC_B_Mcs15_Mcs12)) || + ((pHalData->rf_type != RF_2T2R) && + (regoffset == rTxAGC_A_Mcs07_Mcs04 || regoffset == rTxAGC_B_Mcs07_Mcs04))) { + writeVal = pwr_val[3]; + if (regoffset == rTxAGC_A_Mcs15_Mcs12 || regoffset == rTxAGC_A_Mcs07_Mcs04) + regoffset = 0xc90; + if (regoffset == rTxAGC_B_Mcs15_Mcs12 || regoffset == rTxAGC_B_Mcs07_Mcs04) + regoffset = 0xc98; + for (i = 0; i < 3; i++) { + if (i != 2) + writeVal = (writeVal > 8) ? (writeVal-8) : 0; + else + writeVal = (writeVal > 6) ? (writeVal-6) : 0; + rtw_write8(Adapter, (u32)(regoffset+i), (u8)writeVal); + } + } + } +} + +/*----------------------------------------------------------------------------- + * Function: PHY_RF6052SetOFDMTxPower + * + * Overview: For legacy and HY OFDM, we must read EEPROM TX power index for + * different channel and read original value in TX power register area from + * 0xe00. We increase offset and original value to be correct tx pwr. + * + * Input: NONE + * + * Output: NONE + * + * Return: NONE + * + * Revised History: + * When Who Remark + * 11/05/2008 MHC Simulate 8192 series method. + * 01/06/2009 MHC 1. Prevent Path B tx power overflow or underflow dure to + * A/B pwr difference or legacy/HT pwr diff. + * 2. We concern with path B legacy/HT OFDM difference. + * 01/22/2009 MHC Support new EPRO format from SD3. + * + *---------------------------------------------------------------------------*/ + +void +rtl8188e_PHY_RF6052SetOFDMTxPower( + struct adapter *Adapter, + u8 *pPowerLevelOFDM, + u8 *pPowerLevelBW20, + u8 *pPowerLevelBW40, + u8 Channel) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter); + u32 writeVal[2], powerBase0[2], powerBase1[2], pwrtrac_value; + u8 direction; + u8 index = 0; + + getpowerbase88e(Adapter, pPowerLevelOFDM, pPowerLevelBW20, pPowerLevelBW40, Channel, &powerBase0[0], &powerBase1[0]); + + /* 2012/04/23 MH According to power tracking value, we need to revise OFDM tx power. */ + /* This is ued to fix unstable power tracking mode. */ + ODM_TxPwrTrackAdjust88E(&pHalData->odmpriv, 0, &direction, &pwrtrac_value); + + for (index = 0; index < 6; index++) { + get_rx_power_val_by_reg(Adapter, Channel, index, + &powerBase0[0], &powerBase1[0], + &writeVal[0]); + + if (direction == 1) { + writeVal[0] += pwrtrac_value; + writeVal[1] += pwrtrac_value; + } else if (direction == 2) { + writeVal[0] -= pwrtrac_value; + writeVal[1] -= pwrtrac_value; + } + writeOFDMPowerReg88E(Adapter, index, &writeVal[0]); + } +} + +static int phy_RF6052_Config_ParaFile(struct adapter *Adapter) +{ + struct bb_reg_def *pPhyReg; + struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter); + u32 u4RegValue = 0; + u8 eRFPath; + int rtStatus = _SUCCESS; + + /* 3----------------------------------------------------------------- */ + /* 3 <2> Initialize RF */ + /* 3----------------------------------------------------------------- */ + for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++) { + pPhyReg = &pHalData->PHYRegDef[eRFPath]; + + /*----Store original RFENV control type----*/ + switch (eRFPath) { + case RF_PATH_A: + case RF_PATH_C: + u4RegValue = PHY_QueryBBReg(Adapter, pPhyReg->rfintfs, bRFSI_RFENV); + break; + case RF_PATH_B: + case RF_PATH_D: + u4RegValue = PHY_QueryBBReg(Adapter, pPhyReg->rfintfs, bRFSI_RFENV<<16); + break; + } + /*----Set RF_ENV enable----*/ + PHY_SetBBReg(Adapter, pPhyReg->rfintfe, bRFSI_RFENV<<16, 0x1); + rtw_udelay_os(1);/* PlatformStallExecution(1); */ + + /*----Set RF_ENV output high----*/ + PHY_SetBBReg(Adapter, pPhyReg->rfintfo, bRFSI_RFENV, 0x1); + rtw_udelay_os(1);/* PlatformStallExecution(1); */ + + /* Set bit number of Address and Data for RF register */ + PHY_SetBBReg(Adapter, pPhyReg->rfHSSIPara2, b3WireAddressLength, 0x0); /* Set 1 to 4 bits for 8255 */ + rtw_udelay_os(1);/* PlatformStallExecution(1); */ + + PHY_SetBBReg(Adapter, pPhyReg->rfHSSIPara2, b3WireDataLength, 0x0); /* Set 0 to 12 bits for 8255 */ + rtw_udelay_os(1);/* PlatformStallExecution(1); */ + + /*----Initialize RF fom connfiguration file----*/ + switch (eRFPath) { + case RF_PATH_A: + if (HAL_STATUS_FAILURE == ODM_ConfigRFWithHeaderFile(&pHalData->odmpriv, (enum ODM_RF_RADIO_PATH)eRFPath, (enum ODM_RF_RADIO_PATH)eRFPath)) + rtStatus = _FAIL; + break; + case RF_PATH_B: + if (HAL_STATUS_FAILURE == ODM_ConfigRFWithHeaderFile(&pHalData->odmpriv, (enum ODM_RF_RADIO_PATH)eRFPath, (enum ODM_RF_RADIO_PATH)eRFPath)) + rtStatus = _FAIL; + break; + case RF_PATH_C: + break; + case RF_PATH_D: + break; + } + /*----Restore RFENV control type----*/; + switch (eRFPath) { + case RF_PATH_A: + case RF_PATH_C: + PHY_SetBBReg(Adapter, pPhyReg->rfintfs, bRFSI_RFENV, u4RegValue); + break; + case RF_PATH_B: + case RF_PATH_D: + PHY_SetBBReg(Adapter, pPhyReg->rfintfs, bRFSI_RFENV<<16, u4RegValue); + break; + } + if (rtStatus != _SUCCESS) + goto phy_RF6052_Config_ParaFile_Fail; + } + return rtStatus; + +phy_RF6052_Config_ParaFile_Fail: + return rtStatus; +} + +int PHY_RF6052_Config8188E(struct adapter *Adapter) +{ + struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter); + int rtStatus = _SUCCESS; + + /* */ + /* Initialize general global value */ + /* */ + /* TODO: Extend RF_PATH_C and RF_PATH_D in the future */ + if (pHalData->rf_type == RF_1T1R) + pHalData->NumTotalRFPath = 1; + else + pHalData->NumTotalRFPath = 2; + + /* */ + /* Config BB and RF */ + /* */ + rtStatus = phy_RF6052_Config_ParaFile(Adapter); + return rtStatus; +} -- cgit v0.10.2