From 5ca1088f10d6179a610067ebedc56edc7d98b986 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Thu, 7 Mar 2013 09:02:38 +0100 Subject: Revert "mtd: bcm47xxpart: improve probing of nvram partition" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit be3781b71ac03723b552dc156931620634ef1b22. Some CFE bootloaders have NVRAM at offset 0x1000. With that patch we were detecting such a bootloaders as a standard NVRAM partition. Changing anything in this pseudo-NVRAM resulted in corrupted bootloader and bricked device! Signed-off-by: Rafał Miłecki Signed-off-by: David Woodhouse diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c index 63feb75..4552afb 100644 --- a/drivers/mtd/bcm47xxpart.c +++ b/drivers/mtd/bcm47xxpart.c @@ -19,6 +19,12 @@ /* 10 parts were found on sflash on Netgear WNDR4500 */ #define BCM47XXPART_MAX_PARTS 12 +/* + * Amount of bytes we read when analyzing each block of flash memory. + * Set it big enough to allow detecting partition and reading important data. + */ +#define BCM47XXPART_BYTES_TO_READ 0x404 + /* Magics */ #define BOARD_DATA_MAGIC 0x5246504D /* MPFR */ #define POT_MAGIC1 0x54544f50 /* POTT */ @@ -57,17 +63,14 @@ static int bcm47xxpart_parse(struct mtd_info *master, struct trx_header *trx; int trx_part = -1; int last_trx_part = -1; - int max_bytes_to_read = 0x8004; if (blocksize <= 0x10000) blocksize = 0x10000; - if (blocksize == 0x20000) - max_bytes_to_read = 0x18004; /* Alloc */ parts = kzalloc(sizeof(struct mtd_partition) * BCM47XXPART_MAX_PARTS, GFP_KERNEL); - buf = kzalloc(max_bytes_to_read, GFP_KERNEL); + buf = kzalloc(BCM47XXPART_BYTES_TO_READ, GFP_KERNEL); /* Parse block by block looking for magics */ for (offset = 0; offset <= master->size - blocksize; @@ -82,7 +85,7 @@ static int bcm47xxpart_parse(struct mtd_info *master, } /* Read beginning of the block */ - if (mtd_read(master, offset, max_bytes_to_read, + if (mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ, &bytes_read, (uint8_t *)buf) < 0) { pr_err("mtd_read error while parsing (offset: 0x%X)!\n", offset); @@ -97,16 +100,9 @@ static int bcm47xxpart_parse(struct mtd_info *master, } /* Standard NVRAM */ - if (buf[0x000 / 4] == NVRAM_HEADER || - buf[0x1000 / 4] == NVRAM_HEADER || - buf[0x8000 / 4] == NVRAM_HEADER || - (blocksize == 0x20000 && ( - buf[0x10000 / 4] == NVRAM_HEADER || - buf[0x11000 / 4] == NVRAM_HEADER || - buf[0x18000 / 4] == NVRAM_HEADER))) { + if (buf[0x000 / 4] == NVRAM_HEADER) { bcm47xxpart_add_part(&parts[curr_part++], "nvram", offset, 0); - offset = rounddown(offset, blocksize); continue; } -- cgit v0.10.2 From 91d542f4dcc231749c36114ed8e26bb27d4521e4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Thu, 7 Mar 2013 09:02:39 +0100 Subject: mtd: bcm47xxpart: look for NVRAM at the end of device MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit NVRAM is always placed at the end of device and it does not have to start at the beginning of a block, so check few possible offsets. Signed-off-by: Rafał Miłecki Signed-off-by: David Woodhouse diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c index 4552afb..9279a91 100644 --- a/drivers/mtd/bcm47xxpart.c +++ b/drivers/mtd/bcm47xxpart.c @@ -63,6 +63,7 @@ static int bcm47xxpart_parse(struct mtd_info *master, struct trx_header *trx; int trx_part = -1; int last_trx_part = -1; + int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, }; if (blocksize <= 0x10000) blocksize = 0x10000; @@ -99,13 +100,6 @@ static int bcm47xxpart_parse(struct mtd_info *master, continue; } - /* Standard NVRAM */ - if (buf[0x000 / 4] == NVRAM_HEADER) { - bcm47xxpart_add_part(&parts[curr_part++], "nvram", - offset, 0); - continue; - } - /* * board_data starts with board_id which differs across boards, * but we can use 'MPFR' (hopefully) magic at 0x100 @@ -174,6 +168,30 @@ static int bcm47xxpart_parse(struct mtd_info *master, continue; } } + + /* Look for NVRAM at the end of the last block. */ + for (i = 0; i < ARRAY_SIZE(possible_nvram_sizes); i++) { + if (curr_part > BCM47XXPART_MAX_PARTS) { + pr_warn("Reached maximum number of partitions, scanning stopped!\n"); + break; + } + + offset = master->size - possible_nvram_sizes[i]; + if (mtd_read(master, offset, 0x4, &bytes_read, + (uint8_t *)buf) < 0) { + pr_err("mtd_read error while reading at offset 0x%X!\n", + offset); + continue; + } + + /* Standard NVRAM */ + if (buf[0] == NVRAM_HEADER) { + bcm47xxpart_add_part(&parts[curr_part++], "nvram", + master->size - blocksize, 0); + break; + } + } + kfree(buf); /* -- cgit v0.10.2 From 5bc7c33ca93a285dcfe7b7fd64970f6314440ad1 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Wed, 13 Mar 2013 09:51:31 -0700 Subject: mtd: nand: reintroduce NAND_NO_READRDY as NAND_NEED_READRDY This partially reverts commit 1696e6bc2ae83734e64e206ac99766ea19e9a14e ("mtd: nand: kill NAND_NO_READRDY"). In that patch I overlooked a few things. The original documentation for NAND_NO_READRDY included "True for all large page devices, as they do not support autoincrement." I was conflating "not support autoincrement" with the NAND_NO_AUTOINCR option, which was in fact doing nothing. So, when I dropped NAND_NO_AUTOINCR, I concluded that I then could harmlessly drop NAND_NO_READRDY. But of course the fact the NAND_NO_AUTOINCR was doing nothing didn't mean NAND_NO_READRDY was doing nothing... So, NAND_NO_READRDY is re-introduced as NAND_NEED_READRDY and applied only to those few remaining small-page NAND which needed it in the first place. Cc: stable@kernel.org [3.5+] Reported-by: Alexander Shiyan Tested-by: Alexander Shiyan Signed-off-by: Brian Norris Signed-off-by: David Woodhouse diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 4321415..42c6392 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -1523,6 +1523,14 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, oobreadlen -= toread; } } + + if (chip->options & NAND_NEED_READRDY) { + /* Apply delay or wait for ready/busy pin */ + if (!chip->dev_ready) + udelay(chip->chip_delay); + else + nand_wait_ready(mtd); + } } else { memcpy(buf, chip->buffers->databuf + col, bytes); buf += bytes; @@ -1787,6 +1795,14 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from, len = min(len, readlen); buf = nand_transfer_oob(chip, buf, ops, len); + if (chip->options & NAND_NEED_READRDY) { + /* Apply delay or wait for ready/busy pin */ + if (!chip->dev_ready) + udelay(chip->chip_delay); + else + nand_wait_ready(mtd); + } + readlen -= len; if (!readlen) break; diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c index e3aa274..9c61238 100644 --- a/drivers/mtd/nand/nand_ids.c +++ b/drivers/mtd/nand/nand_ids.c @@ -22,49 +22,51 @@ * 512 512 Byte page size */ struct nand_flash_dev nand_flash_ids[] = { +#define SP_OPTIONS NAND_NEED_READRDY +#define SP_OPTIONS16 (SP_OPTIONS | NAND_BUSWIDTH_16) #ifdef CONFIG_MTD_NAND_MUSEUM_IDS - {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, 0}, - {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, 0}, - {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, 0}, - {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, 0}, - {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0}, - {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, 0}, - {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, 0}, - {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, 0}, - {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, 0}, - {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, 0}, - - {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, 0}, - {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, 0}, - {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16}, - {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16}, + {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, SP_OPTIONS}, + {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, SP_OPTIONS}, + {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, SP_OPTIONS}, + {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, SP_OPTIONS}, + {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, SP_OPTIONS}, + {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, SP_OPTIONS}, + {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, SP_OPTIONS}, + {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, SP_OPTIONS}, + {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, SP_OPTIONS}, + {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, SP_OPTIONS}, + + {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, SP_OPTIONS}, + {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, SP_OPTIONS}, + {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, SP_OPTIONS16}, + {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, SP_OPTIONS16}, #endif - {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, 0}, - {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, 0}, - {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, NAND_BUSWIDTH_16}, - {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, NAND_BUSWIDTH_16}, - - {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, 0}, - {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, 0}, - {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, NAND_BUSWIDTH_16}, - {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, NAND_BUSWIDTH_16}, - - {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, 0}, - {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, 0}, - {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, NAND_BUSWIDTH_16}, - {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16}, - - {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, 0}, - {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, 0}, - {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, 0}, - {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16}, - {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, NAND_BUSWIDTH_16}, - {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16}, - {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, NAND_BUSWIDTH_16}, - - {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, 0}, + {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, SP_OPTIONS}, + {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, SP_OPTIONS}, + {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, SP_OPTIONS16}, + {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, SP_OPTIONS16}, + + {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, SP_OPTIONS}, + {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, SP_OPTIONS}, + {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, SP_OPTIONS16}, + {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, SP_OPTIONS16}, + + {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, SP_OPTIONS}, + {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, SP_OPTIONS}, + {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, SP_OPTIONS16}, + {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, SP_OPTIONS16}, + + {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, SP_OPTIONS}, + {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, SP_OPTIONS}, + {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, SP_OPTIONS}, + {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, SP_OPTIONS16}, + {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, SP_OPTIONS16}, + {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, SP_OPTIONS16}, + {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, SP_OPTIONS16}, + + {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, SP_OPTIONS}, /* * These are the new chips with large page size. The pagesize and the diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 7ccb3c5..ef52d9c 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -187,6 +187,13 @@ typedef enum { * This happens with the Renesas AG-AND chips, possibly others. */ #define BBT_AUTO_REFRESH 0x00000080 +/* + * Chip requires ready check on read (for auto-incremented sequential read). + * True only for small page devices; large page devices do not support + * autoincrement. + */ +#define NAND_NEED_READRDY 0x00000100 + /* Chip does not allow subpage writes */ #define NAND_NO_SUBPAGE_WRITE 0x00000200 -- cgit v0.10.2